Science.gov

Sample records for additional experiments showed

  1. Casimir experiments showing saturation effects

    SciTech Connect

    Sernelius, Bo E.

    2009-10-15

    We address several different Casimir experiments where theory and experiment disagree. First out is the classical Casimir force measurement between two metal half spaces; here both in the form of the torsion pendulum experiment by Lamoreaux and in the form of the Casimir pressure measurement between a gold sphere and a gold plate as performed by Decca et al.; theory predicts a large negative thermal correction, absent in the high precision experiments. The third experiment is the measurement of the Casimir force between a metal plate and a laser irradiated semiconductor membrane as performed by Chen et al.; the change in force with laser intensity is larger than predicted by theory. The fourth experiment is the measurement of the Casimir force between an atom and a wall in the form of the measurement by Obrecht et al. of the change in oscillation frequency of a {sup 87}Rb Bose-Einstein condensate trapped to a fused silica wall; the change is smaller than predicted by theory. We show that saturation effects can explain the discrepancies between theory and experiment observed in all these cases.

  2. 19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS CONCRETE BLOCK CONSTRUCTION OF ADDITION. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  3. Side elevation of Building 477 showing the shed roof addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side elevation of Building 477 showing the shed roof addition and horizontal siding at the ends, view facing northwest - U.S. Marine Corps Base Hawaii, Kaneohe Bay, Golf Course Equipment & Repair Shop, Reeves & Moffett Roads, Kaneohe, Honolulu County, HI

  4. 13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING BANNISTER, HANDRAIL AND NEWEL POSTS AND TONGUE AND GROOVE WAINSCOTING. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  5. View of southwest corner showing ell addition and carport, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of southwest corner showing ell addition and carport, facing northeast. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  6. View of building 11050, showing two additions on east and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing two additions on east and north side. Looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  7. View of building 11050, showing metal clad addition on east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing metal clad addition on east elevation, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  8. View of building 11050 showing south side with modern addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  9. 1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ANGLES IN BUILDING AT SOUTHERN END. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  10. 10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT LOG WALL OF MAIN HOUSE - Whitcomb Cabin, BZ Corners, Glenwood County Road (Conboy Lake National Wildlife Refuge), Glenwood, Klickitat County, WA

  11. Interior view of addition pharmacy showing dutch door and security ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of addition pharmacy showing dutch door and security ceiling grate, facing north. - Albrook Air Force Station, Dispensary, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ

  12. 4. WEST SIDE OF CANNERY In addition to showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. WEST SIDE OF CANNERY In addition to showing the on-going deterioration of the buildings, this view shows the variety of types of construction used as the numerous additions were being made. The wooden covered conveyor system, which transported empty cans from the can storage area to the canning floor can be seen at the base of the smoke stack to the right. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  13. 15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

  14. Oblique view from southwest showing newer (1966) addition with taller ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Oblique view from southwest showing newer (1966) addition with taller original structure, view facing east-northeast - U.S. Naval Base, Pearl Harbor, Industrial X-Ray Building, Off Sixth Street, adjacent to and south of Facility No. 11, Pearl City, Honolulu County, HI

  15. 32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR AT PHOTO LEFT CENTER AND 1-LIGHT OVER 1LIGHT SASH WINDOW THROUGH WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  16. 8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF NAILS USED TO ADHERE PORTLAND CEMENT PLASTER, SOUTH ADOBE WALL ADJACENT TO WINDOW Note: Photographs Nos. AZ-159-A-9 through AZ-159-A-10 are photocopies of photographs. The original prints and negatives are located in the SCS Tucson Plant Materials Center, Tucson, Arizona. Photographer Ted F. Spaller. - Tucson Plant Material Center, Machinery Shed, 3241 North Romero Road, Tucson, Pima County, AZ

  17. 51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER AT LOWER LEFT, AND FOUNDATIONS FOR ROD MILL BETWEEN COOLER AND STEPHENS-ADAMSON INCLINED BUCKET ELEVATOR. THE BELT CONVEYOR TO RIGHT OF ELEVATOR FED ELEVATOR FROM ROD MILL. 100-TON ORE BIN AND DUST COLLECTOR IS BEHIND FRAMING BENT. NOTE CONVEYOR EMERGING FROM BOTTOM OF ORE BIN, THIS AND THE INCLINED ELEVATOR FED THE SYMONS SCREEN (MISSING). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  18. Worldwide experience shows horizontal well success

    SciTech Connect

    Karlsson, H.; Bitto, R.

    1989-03-01

    The convergence of technology and experience has made horizontal drilling an important tool in increasing production and solving a variety of completion problems. Since the early 1980s, horizontal drilling has been used to improve production on more than 700 oil and gas wells throughout the world. Approximately 200 horizontal wells were drilled in 1988 alone. Interest in horizontal drilling has been accelerating rapidly as service companies have developed and offered new technology for drilling and producing horizontal wells. Simultaneously, oil companies have developed better methods for evaluating reservoirs for potential horizontal applications, while their production departments have gained experience at completing and producing them. To date, most horizontal wells have been drilled in the United States. A major application is to complete naturally fractured formations, such as the Austin chalk in Texas, the Bakken shale in the Williston basin, the Spraberry in West Texas and the Devonian shale in the Eastern states. In addition, many horizontal wells have been drilled to produce the Niagaran reefs and the irregular Antrim shale reservoirs in Michigan.

  19. Experiments showing dynamics of materials interfaces

    SciTech Connect

    Benjamin, R.F.

    1997-02-01

    The discipline of materials science and engineering often involves understanding and controlling properties of interfaces. The authors address the challenge of educating students about properties of interfaces, particularly dynamic properties and effects of unstable interfaces. A series of simple, inexpensive, hands-on activities about fluid interfaces provides students with a testbed to develop intuition about interface dynamics. The experiments highlight the essential role of initial interfacial perturbations in determining the dynamic response of the interface. The experiments produce dramatic, unexpected effects when initial perturbations are controlled and inhibited. These activities help students to develop insight about unstable interfaces that can be applied to analogous problems in materials science and engineering. The lessons examine ``Rayleigh-Taylor instability,`` an interfacial instability that occurs when a higher-density fluid is above a lower-density fluid.

  20. Children's Art Show: An Educational Family Experience

    ERIC Educational Resources Information Center

    Bakerlis, Julienne

    2007-01-01

    In a time of seemingly rampant budget cuts in the arts in school systems throughout the country, a children's art show reaps many rewards. It can strengthen family-school relationships and community ties and stimulate questions and comments about the benefits of art and its significance in the development of young children. In this photo essay of…

  1. French and English Together: An "Additive" Experience

    ERIC Educational Resources Information Center

    Wiltshire, Jessica; Harbon, Lesley

    2010-01-01

    This paper examines the nature of the "additive" experience of a bilingual French-English curriculum at Killarney Heights Public School in New South Wales. Predictably, the well-supported "additive" nature of the languages program model elicited positive reactions regarding educational success. The paper also explores issues for administration,…

  2. Occupational health experience with organic additives.

    PubMed

    Thiess, A M; Wellenreuther, G

    1984-12-01

    For many decades, interest in occupational medicine has been focused on the wide variety of organic additives, which includes a large number of substances, for example, dyestuffs, pigments, and auxiliaries for the textile, leather, and paper industries. The reason is that, if the recommended precautions are not observed, there is a risk of exposure to most of these substances during both production and use. Moreover, over the years, some additives have caused concern and aroused suspicion regarding adverse effects on health. In order to deal with health problems in this field, it is important to be aware of how, what, and where occupational diseases or accidents arise. Much knowledge has been gained about these, and it would be an impossible task to give a systematic survey of the data that have accumulated, especially since it is necessary to take account of the problem of exposure to more than one substance. Thus an attempt is made to report on occupational health experience in general, and to demonstrate how an industrial hygienist may approach the many and various problems. Some epidemiological studies on organic additives (auramine, anthraquinone dyestuffs, organic dyes, etc.) are discussed.

  3. Polymer Photooxidation: An Experiment to Demonstrate the Effect of Additives.

    ERIC Educational Resources Information Center

    Allen, Norman S.; McKellar, John F.

    1979-01-01

    This undergraduate experiment shows that the inclusion of an appropriate additive can have a very marked effect on the physical properties of a polymer. The polymer used is polypropylene and the additives are 2-hydroxy-4-octyloxy-benzophenone and benzophenone. (BB)

  4. 12. Interior view of the 1930's leant0 addition, showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Interior view of the 1930's lean-t0 addition, showing the commercial storage and space and the addition's roof framing; looking north - Horsepasture Store, U.S. Route 58 & State Route 687, Horse Pasture, Henry County, VA

  5. 54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ADDITION ON LEFT WITH BASE OF EXHAUST STACK, PORTION OF TOPPLED STACK ON LOWER RIGHT IN VIEW, AND UPPER TAILINGS POND BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  6. Patient Experience Shows Little Relationship with Hospital Quality Management Strategies

    PubMed Central

    Groene, Oliver; Arah, Onyebuchi A.; Klazinga, Niek S.; Wagner, Cordula; Bartels, Paul D.; Kristensen, Solvejg; Saillour, Florence; Thompson, Andrew; Thompson, Caroline A.; Pfaff, Holger; DerSarkissian, Maral; Sunol, Rosa

    2015-01-01

    Objectives Patient-reported experience measures are increasingly being used to routinely monitor the quality of care. With the increasing attention on such measures, hospital managers seek ways to systematically improve patient experience across hospital departments, in particular where outcomes are used for public reporting or reimbursement. However, it is currently unclear whether hospitals with more mature quality management systems or stronger focus on patient involvement and patient-centered care strategies perform better on patient-reported experience. We assessed the effect of such strategies on a range of patient-reported experience measures. Materials and Methods We employed a cross-sectional, multi-level study design randomly recruiting hospitals from the Czech Republic, France, Germany, Poland, Portugal, Spain, and Turkey between May 2011 and January 2012. Each hospital contributed patient level data for four conditions/pathways: acute myocardial infarction, stroke, hip fracture and deliveries. The outcome variables in this study were a set of patient-reported experience measures including a generic 6-item measure of patient experience (NORPEQ), a 3-item measure of patient-perceived discharge preparation (Health Care Transition Measure) and two single item measures of perceived involvement in care and hospital recommendation. Predictor variables included three hospital management strategies: maturity of the hospital quality management system, patient involvement in quality management functions and patient-centered care strategies. We used directed acyclic graphs to detail and guide the modeling of the complex relationships between predictor variables and outcome variables, and fitted multivariable linear mixed models with random intercept by hospital, and adjusted for fixed effects at the country level, hospital level and patient level. Results Overall, 74 hospitals and 276 hospital departments contributed data on 6,536 patients to this study (acute

  7. The Macnamara Medicine Show: an Experiment in Higher Education.

    ERIC Educational Resources Information Center

    O'Keefe, Phil; Halverson, Bret

    1979-01-01

    Describes an experiment using theatrical methods to present the impact of natural disasters upon the poorest classes of the population. Concludes that it is essential to include affective learning opportunities in course design. Journal availability: see SO 507 262. (Author/CK)

  8. 50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100TON STEEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100-TON STEEL UNOXIDIZED ORE BIN, STEPHENS-ADAMSON 15 TON/HR INCLINED BUCKET ELEVATOR, AND DUST COLLECTION BIN IN UPPER RIGHT QUADRANT. THE ROD MILL CIRCUIT STOOD IN FRONT OF THE BUCKET ELEVATOR AND BEHIND THE BAKER COOLER (LEFT CENTER). MILL SOLUTION TANKS WERE IN FRONT OF THE CRUSHED OXIDIZED ORE BIN (CENTER), AND THE MILL FLOOR WAS THE NEXT LEVEL DOWN (RIGHT). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  9. Effects of an additional dimension in the Young experiment

    SciTech Connect

    Barros, Allan Kardec

    2015-09-15

    The results of the Young experiment can be analyzed either by classical or Quantum Physics. The later one though leads to a more complete interpretation, based on two different patterns that appear when one works either with single or double slits. Here we show that the two patterns can be derived from a single principle, in the context of General Relativity, if one assumes an additional spatial dimension to the four known today. The found equations yield the same results as those in Quantum Mechanics.

  10. Model experiments showing simultaneous development of folds and transcurrent faults

    NASA Astrophysics Data System (ADS)

    Dubey, Ashok Kumar

    1980-05-01

    Simultaneous development of noncylindrical folds and transcurrent fractures has been studied using model techniques. A plasticine model was compressed in one direction and an initial formation of folds was followed by the initiation of conjugate sets of transcurrent fractures. It was recorded that with progressive deformation the length of each fracture and the displacement along it increase steadily and the rate of displacement varies at different stages of deformation. Individual fold geometries vary along their hinge lines and these geometrical variations appear to be due to interference of folds with the transcurrent fractures. These interference effects also change the amount of rotation of fractures. Fold structures are different on either side of the fault plane. A natural example from the Bude area, England, shows similar geometrical features. The method of determining fault displacement by comparing the positions of fold hinge lines on either side of a fault is discussed in the light of the above results.

  11. Fire extinct experiments with water mist by adding additives

    NASA Astrophysics Data System (ADS)

    Yang, Lijun; Zhao, Jianbo

    2011-12-01

    The effects of fire extinguishment with water mist by adding different additives were studied. Tens of chemical substances (including alkali metal salt, dilution agent and surface active agent) were selected as additives due to their different extinct mechanisms. At first the performance of fire extinguishment with single additive was studied, then the effects of the same kinds of chemical substances under the same mass fraction were compared to study their influences on the fire extinguishment factors, including extinct time, fire temperature and oxygen concentration from which the fire extinct mechanism with additives could be concluded. Based on this the experiments were conducted to study the cooperate effect of the complexity of different additives. It indicated the relations between different firefighting mechanisms and different additives were competitive. From a large number of experiments the extinct mechanism with water mist by adding additives was concluded and an optimal compounding additive was selected.

  12. News Note: Addition of drug to standard chemo for prostate cancer shows no benefit

    Cancer.gov

    Prostate cancer patients in a phase 3 trial who were non-responsive to hormone therapy and received the investigational agent atrasentan in addition to a standard chemotherapy regimen, did not have longer survival or longer progression-free survival compared to the patients on the same chemotherapy regimen and a placebo. This determination was made by the trial’s Data and Safety Monitoring Committee (DSMC) based on a planned interim analysis of the trial.

  13. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  14. Estimation of stream nutrient uptake from nutrient addition experiments

    SciTech Connect

    Payn, Robert

    2005-09-01

    Nutrient uptake in streams is often quantified by determining nutrient uptake length. However, current methods for measuring nutrient uptake length are often impractical, expensive, or demonstrably incorrect. We have developed a new method to estimate ambient nutrient uptake lengths using field experiments involving several levels of nutrient addition. Data analysis involves plotting nutrient addition uptake lengths versus added concentration and extrapolating to the negative ambient concentration. This method is relatively easy, inexpensive, and based on sound theoretical development. It is more accurate than the commonly used method involving a single nutrient addition. The utility of the method is supported by field studies directly comparing our new method with isotopic tracer methods for determining uptake lengths of phosphorus, ammonium, and nitrate. Our method also provides parameters for comparing potential nutrient limitation among streams.

  15. Software reliability: Additional investigations into modeling with replicated experiments

    NASA Technical Reports Server (NTRS)

    Nagel, P. M.; Schotz, F. M.; Skirvan, J. A.

    1984-01-01

    The effects of programmer experience level, different program usage distributions, and programming languages are explored. All these factors affect performance, and some tentative relational hypotheses are presented. An analytic framework for replicated and non-replicated (traditional) software experiments is presented. A method of obtaining an upper bound on the error rate of the next error is proposed. The method was validated empirically by comparing forecasts with actual data. In all 14 cases the bound exceeded the observed parameter, albeit somewhat conservatively. Two other forecasting methods are proposed and compared to observed results. Although demonstrated relative to this framework that stages are neither independent nor exponentially distributed, empirical estimates show that the exponential assumption is nearly valid for all but the extreme tails of the distribution. Except for the dependence in the stage probabilities, Cox's model approximates to a degree what is being observed.

  16. Evaluation of reactions to food additives: the aspartame experience.

    PubMed

    Bradstock, M K; Serdula, M K; Marks, J S; Barnard, R J; Crane, N T; Remington, P L; Trowbridge, F L

    1986-03-01

    Despite the widespread use of chemical food additives, few criteria exist to evaluate consumer reports of adverse reactions. We analyzed 231 consumer complaints associated with the food additive aspartame. We developed a methodologic approach to evaluate all complaints by adapting general criteria used to investigate adverse reactions to medications. Complaints were ranked according to the effects of cessation and rechallenge. Using this method, we found no clear symptom complex that suggests a widespread public health hazard associated with aspartame use; however, we identified some case reports in which the symptoms may be attributable to aspartame in commonly-consumed amounts. The systematic application of pre-defined review criteria, such as those described here, to monitor consumer complaints related to food additives will help identify products that warrant more focused clinical studies.

  17. Carbonyl and Conjugate Additions to Cyclohexenone: Experiments Illustrating Reagent Selectivity

    NASA Astrophysics Data System (ADS)

    Organ, Michael G.; Anderson, Paul

    1996-12-01

    Organic chemistry is very challenging for most undergraduate students in that it is often perceived to be a subject unto itself, seemingly with its own language. Consequently, the focus of the curricula in most one-year organic chemistry courses is commonly on "the basics", and issues that may serve to confuse are often glosses over or omitted completely. One such issue is the reagent selectivity, or chemoselectivity, observed when a reagent is added to starting materials that possess more than one reactive site or functional group. This is an issue commonly faced by a practicing synthetic chemist in the production of target molecules of industrial interest. Undergraduate students leaving an organic chemistry program should have exposure to these concepts and hand-on experinence in dealing practically with the issue of selectivity. In this paper, selective addition of a nucleophile to either end of the enone moiety in cyclohexenone is examined.

  18. Searching the UVSP database and a list of experiments showing mass motions

    NASA Technical Reports Server (NTRS)

    Thompson, William

    1986-01-01

    Since the Solar Maximum Mission (SMM) satellite was launched, a large database has been built up of experiments using the Ultraviolet Spectrometer and Polarimeter (UVSP) instrument. Access to this database can be gained through the SMM Vax 750 computer at Goddard Space Flight Center. One useful way to do this is with a program called USEARCH. This program allows one to make a listing of different types of UVSP experiments. It is evident that this program is useful to those who would wish to make use of UVSP data, but who don't know what data is available. Therefore it was decided to include a short description of how to make use of the USEARCH program. Also described, but not included, is a listing of all UVSP experiments showing mass motions in prominences and filaments. This list was made with the aid of the USEARCH program.

  19. Chemical and biological consequences of using carbon dioxide versus acid additions in ocean acidification experiments

    USGS Publications Warehouse

    Yates, Kimberly K.; DuFore, Christopher M.; Robbins, Lisa L.

    2013-01-01

    Use of different approaches for manipulating seawater chemistry during ocean acidification experiments has confounded comparison of results from various experimental studies. Some of these discrepancies have been attributed to whether addition of acid (such as hydrochloric acid, HCl) or carbon dioxide (CO2) gas has been used to adjust carbonate system parameters. Experimental simulations of carbonate system parameter scenarios for the years 1766, 2007, and 2100 were performed using the carbonate speciation program CO2SYS to demonstrate the variation in seawater chemistry that can result from use of these approaches. Results showed that carbonate system parameters were 3 percent and 8 percent lower than target values in closed-system acid additions, and 1 percent and 5 percent higher in closed-system CO2 additions for the 2007 and 2100 simulations, respectively. Open-system simulations showed that carbonate system parameters can deviate by up to 52 percent to 70 percent from target values in both acid addition and CO2 addition experiments. Results from simulations for the year 2100 were applied to empirically derived equations that relate biogenic calcification to carbonate system parameters for calcifying marine organisms including coccolithophores, corals, and foraminifera. Calculated calcification rates for coccolithophores, corals, and foraminifera differed from rates at target conditions by 0.5 percent to 2.5 percent in closed-system CO2 gas additions, from 0.8 percent to 15 percent in the closed-system acid additions, from 4.8 percent to 94 percent in open-system acid additions, and from 7 percent to 142 percent in open-system CO2 additions.

  20. Combined exposure to lead, inorganic mercury and methylmercury shows deviation from additivity for cardiovascular toxicity in rats.

    PubMed

    Wildemann, Tanja M; Weber, Lynn P; Siciliano, Steven D

    2015-08-01

    Environmental exposure to metal mixtures in the human population is common. Mixture risk assessments are often challenging because of a lack of suitable data on the relevant mixture. A growing number of studies show an association between lead or mercury exposure and cardiovascular effects. We investigated the cardiovascular effects of single metal exposure or co-exposure to methylmercury [MeHg(I)], inorganic mercury [Hg(II)] and lead [Pb(II)]. Male Wistar rats received four different metal mixtures for 28 days through the drinking water. The ratios of the metals were based on reference and environmental exposure values. Blood and pulse pressure, cardiac output and electrical activity of the heart were selected as end-points. While exposure to only MeHg(I) increased the systolic blood pressure and decreased cardiac output, the effects were reversed with combined exposures (antagonism). In contrast to these effects, combined exposures negatively affected the electrical activity of the heart (synergism). Thus, it appears that estimates of blood total Hg levels need to be paired with estimates of what species of mercury dominate exposure as well as whether lead co-exposure is present to link total blood Hg levels to cardiovascular effects. Based on current human exposure data and our results, there may be an increased risk of cardiac events as a result of combined exposures to Hg(II), MeHg(I) and Pb(II). This increased risk needs to be clarified by analyzing lead and Hg exposure data in relation to cardiac electrical activity in epidemiological studies.

  1. F-18 SRA closeup of nose cap showing Advanced L-Probe Air Data Integration experiment

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This L-shaped probe mounted on the forward fuselage of a modified F-18 Systems Research Aircraft was the focus of an air data collection experiment flown at NASA's Dryden Flight Research Center, Edwards, California. The Advanced L-Probe Air Data Integration (ALADIN) experiment focused on providing pilots with angle-of-attack and angle-of-sideslip information as well as traditional airspeed and altitude data from a single system. For the experiment, the probes--one mounted on either side of the F-18's forward fuselage--were hooked to a series of four transducers, which relayed pressure measurements to an on-board research computer.

  2. Police arrest and self-defence skills: performance under anxiety of officers with and without additional experience in martial arts.

    PubMed

    Renden, Peter G; Landman, Annemarie; Savelsbergh, Geert J P; Oudejans, Raôul R D

    2015-01-01

    We investigated whether officers with additional martial arts training experience performed better in arrest and self-defence scenarios under low and high anxiety and were better able to maintain performance under high anxiety than officers who just rely on regular police training. We were especially interested to find out whether training once a week would already lead to better performance under high anxiety. Officers with additional experience in kickboxing or karate/jiu-jitsu (training several times per week), or krav maga (training once a week) and officers with no additional experience performed several arrest and self-defence skills under low and high anxiety. Results showed that officers with additional experience (also those who trained once a week) performed better under high anxiety than officers with no additional experience. Still, the additional experience did not prevent these participants from performing worse under high anxiety compared to low anxiety. Implications for training are discussed. Practitioner summary: Dutch police officers train their arrest and self-defence skills only four to six hours per year. Our results indicate that doing an additional martial arts training once a week may lead to better performance under anxiety, although it cannot prevent that performance decreases under high anxiety compared to low anxiety.

  3. Lullaby Light Shows: Everyday Musical Experience among Under-Two-Year-Olds

    ERIC Educational Resources Information Center

    Young, Susan

    2008-01-01

    This article reports on information gathered from a set of interviews carried out with 88 mothers of under-two-year-olds. The interviews enquired about the everyday musical experiences of their babies and very young children in the home. From the process of analysis, the responses to the interviews were grouped into three main areas: musical…

  4. Do Talk Shows Cultivate Adolescents' Views of the World? A Prolonged-Exposure Experiment.

    ERIC Educational Resources Information Center

    Rossler, Patrick; Brosius, Hans-Bernd

    2001-01-01

    Investigates effects of German daily talk shows (dealing with lesbian or gay male relationships, transsexuality, and body adornment) on adolescents. Shows that cultivation effects occurred at both first- and second-order level, but were restricted to the issues; and no transfer effects pertaining to a general change of attitudes. Concludes…

  5. Real Science: MIT Reality Show Tracks Experiences, Frustrations of Chemistry Lab Students

    ERIC Educational Resources Information Center

    Cooper, Kenneth J.

    2012-01-01

    A reality show about a college course--a chemistry class no less? That's what "ChemLab Boot Camp" is. The 14-part series of short videos is being released one episode at a time on the online learning site of the Massachusetts Institute of Technology. The novel show follows a diverse group of 14 freshmen as they struggle to master the laboratory…

  6. Gas Chromatographic Determination of Methyl Salicylate in Rubbing Alcohol: An Experiment Employing Standard Addition.

    ERIC Educational Resources Information Center

    Van Atta, Robert E.; Van Atta, R. Lewis

    1980-01-01

    Provides a gas chromatography experiment that exercises the quantitative technique of standard addition to the analysis for a minor component, methyl salicylate, in a commercial product, "wintergreen rubbing alcohol." (CS)

  7. Responses of estuarine nematodes to an increase in nutrient supply: an in situ continuous addition experiment.

    PubMed

    Ferreira, R C; Nascimento-Junior, A B; Santos, P J P; Botter-Carvalho, M L; Pinto, T K

    2015-01-15

    An experiment was carried out on an estuarine mudflat to assess impacts of inorganic nutrients used to fertilize sugar-cane fields on the surrounding aquatic ecosystem, through changes in the nematode community structure. During 118 days, nine quadrats each 4m(2) were sampled six times after the beginning of fertilizer addition. The fertilizer was introduced weekly in six areas, at two different concentrations (low and high doses), and three areas were used as control. The introduction of nutrients modified key nematode community descriptors. In general, the nematodes were negatively affected over the study period. However, Comesa, Metachromadora, Metalinhomoeus, Spirinia and Terschellingia were considered tolerant, and other genera showed different degrees of sensitivity. Nutrient input also affect the availability and quality of food, changing the nematode trophic structure. The use of inorganic fertilizer should be evaluated with care because of the potential for damage to biological communities of coastal aquatic systems.

  8. The experience of Massachusetts shows that consumers will need help in navigating insurance exchanges.

    PubMed

    Sinaiko, Anna D; Ross-Degnan, Dennis; Soumerai, Stephen B; Lieu, Tracy; Galbraith, Alison

    2013-01-01

    In 2022 twenty-five million people are expected to purchase health insurance through exchanges to be established under the Affordable Care Act. Understanding how people seek information and make decisions about the insurance plans that are available to them may improve their ability to select a plan and their satisfaction with it. We conducted a survey in 2010 of enrollees in one plan offered through Massachusetts's unsubsidized health insurance exchange to analyze how a sample of consumers selected their plans. More than 40 percent found plan information difficult to understand. Approximately one-third of respondents had help selecting plans-most commonly from friends or family members. However, one-fifth of respondents wished they had had help narrowing plan choices; these enrollees were more likely to report negative experiences related to plan understanding, satisfaction with affordability and coverage, and unexpected costs. Some may have been eligible for subsidized plans. Exchanges may need to provide more resources and decision-support tools to improve consumers' experiences in selecting a health plan. PMID:23297274

  9. Voices from the Classroom: Experiences of Teachers of Deaf Students with Additional Disabilities

    ERIC Educational Resources Information Center

    Musyoka, Millicent Malinda; Gentry, Mary Anne; Bartlett, James Joseph

    2016-01-01

    The purpose of this research is to investigate experiences of K-12 classroom teachers of deaf students with additional disabilities. Today, more deaf and hard of hearing students are identified as having additional disabilities (Bruce, DiNatale & Ford, 2008; Ewing, 2011; Gallaudet Research Institute, 2011; Jones, Jones & Ewing, 2006;…

  10. Global decomposition experiment shows soil animal impacts on decomposition are climate-dependent

    PubMed Central

    WALL, DIANA H; BRADFORD, MARK A; ST JOHN, MARK G; TROFYMOW, JOHN A; BEHAN-PELLETIER, VALERIE; BIGNELL, DAVID E; DANGERFIELD, J MARK; PARTON, WILLIAM J; RUSEK, JOSEF; VOIGT, WINFRIED; WOLTERS, VOLKMAR; GARDEL, HOLLEY ZADEH; AYUKE, FRED O; BASHFORD, RICHARD; BELJAKOVA, OLGA I; BOHLEN, PATRICK J; BRAUMAN, ALAIN; FLEMMING, STEPHEN; HENSCHEL, JOH R; JOHNSON, DAN L; JONES, T HEFIN; KOVAROVA, MARCELA; KRANABETTER, J MARTY; KUTNY, LES; LIN, KUO-CHUAN; MARYATI, MOHAMED; MASSE, DOMINIQUE; POKARZHEVSKII, ANDREI; RAHMAN, HOMATHEVI; SABARÁ, MILLOR G; SALAMON, JOERG-ALFRED; SWIFT, MICHAEL J; VARELA, AMANDA; VASCONCELOS, HERALDO L; WHITE, DON; ZOU, XIAOMING

    2008-01-01

    Climate and litter quality are primary drivers of terrestrial decomposition and, based on evidence from multisite experiments at regional and global scales, are universally factored into global decomposition models. In contrast, soil animals are considered key regulators of decomposition at local scales but their role at larger scales is unresolved. Soil animals are consequently excluded from global models of organic mineralization processes. Incomplete assessment of the roles of soil animals stems from the difficulties of manipulating invertebrate animals experimentally across large geographic gradients. This is compounded by deficient or inconsistent taxonomy. We report a global decomposition experiment to assess the importance of soil animals in C mineralization, in which a common grass litter substrate was exposed to natural decomposition in either control or reduced animal treatments across 30 sites distributed from 43°S to 68°N on six continents. Animals in the mesofaunal size range were recovered from the litter by Tullgren extraction and identified to common specifications, mostly at the ordinal level. The design of the trials enabled faunal contribution to be evaluated against abiotic parameters between sites. Soil animals increase decomposition rates in temperate and wet tropical climates, but have neutral effects where temperature or moisture constrain biological activity. Our findings highlight that faunal influences on decomposition are dependent on prevailing climatic conditions. We conclude that (1) inclusion of soil animals will improve the predictive capabilities of region- or biome-scale decomposition models, (2) soil animal influences on decomposition are important at the regional scale when attempting to predict global change scenarios, and (3) the statistical relationship between decomposition rates and climate, at the global scale, is robust against changes in soil faunal abundance and diversity.

  11. Response of non-added solutes during nutrient addition experiments in streams

    NASA Astrophysics Data System (ADS)

    Rodriguez-Cardona, B.; Wymore, A.; Koenig, L.; Coble, A. A.; McDowell, W. H.

    2015-12-01

    Nutrient addition experiments, such as Tracer Additions for Spiraling Curve Characterization (TASCC), have become widely popular as a means to study nutrient uptake dynamics in stream ecosystems. However, the impact of these additions on ambient concentrations of non-added solutes is often overlooked. TASCC addition experiments are ideal for assessing interactions among solutes because it allows for the characterization of multiple solute concentrations across a broad range of added nutrient concentrations. TASCC additions also require the addition of a conservative tracer (NaCl) to track changes in conductivity during the experimental manipulation. Despite its use as a conservative tracer, chloride (Cl) and its associated sodium (Na) might change the concentrations of other ions and non-added nutrients through ion exchange or other processes. Similarly, additions of biologically active solutes might change the concentrations of other non-added solutes. These methodological issues in nutrient addition experiments have been poorly addressed in the literature. Here we examine the response of non-added solutes to pulse additions (i.e. TASCC) of NaCl plus nitrate (NO3-), ammonium, and phosphate across biomes including temperate and tropical forests, and arctic taiga. Preliminary results demonstrate that non-added solutes respond to changes in the concentration of these added nutrients. For example, concentrations of dissolved organic nitrogen (DON) in suburban headwater streams of New Hampshire both increase and decrease in response to NO3- additions, apparently due to biotic processes. Similarly, cations such as potassium, magnesium, and calcium also increase during TASCC experiments, likely due to cation exchange processes associated with Na addition. The response of non-added solutes to short-term pulses of added nutrients and tracers needs to be carefully assessed to ensure that nutrient uptake metrics are accurate, and to detect biotic interactions that may

  12. Specific yield - laboratory experiments showing the effect of time on column drainage

    USGS Publications Warehouse

    Prill, Robert C.; Johnson, A.I.; Morris, Donald Arthur

    1965-01-01

    The increasing use of ground water from many major aquifers in the United States has required a more thorough understanding of gravity drainage, or specific yield. This report describes one phase of specific yield research by the U.S. Geological Survey's Hydrologic Laboratory in cooperation with the California Department of Water Resources. An earlier phase of the research concentrated on the final distribution of moisture retained after drainage of saturated columns of porous media. This report presents the phase that concentrated on the distribution of moisture retained in similar columns after drainage for various periods of time. Five columns, about 4 cm in diameter by 170 cm long, were packed with homogenous sand of very fine, medium, and coarse sizes, and one column was packed with alternating layers of coarse and medium sand. The very fine materials were more uniform in size range than were the medium materials. As the saturated columns drained, tensiometers installed throughout the length recorded changes in moisture tension. The relation of tension to moisture content, determined for each of the materials, was then used to convert the tension readings to moisture content. Data were then available on the distribution of retained moisture for different periods of drainage from 1 to 148 hours. Data also are presented on the final distribution of moisture content by weight and volume and on the degree of saturation. The final zone of capillary saturation was approximately 12 cm for coarse sand, 13 cm for medium sand, and 52 cm for very fine sand. The data showed these zones were 92 to 100 percent saturated. Most of the outflow from the columns occurred in the earlier hours of drainage--90 percent in 1 hour for the coarse materials, 50 percent for the medium, and 60 percent for the very fine. Although the largest percentage of the specific yield was reached during the early hours of .drainage, this study amply demonstrates that a very long time would be

  13. Does medicine still show an unresolved discrimination against women? Experience in two European university hospitals.

    PubMed

    Santamaría, A; Merino, A; Viñas, O; Arrizabalaga, P

    2009-02-01

    Have invisible barriers for women been broken in 2007, or do we still have to break through medicine's glass ceiling? Data from two of the most prestigious university hospitals in Barcelona with 700-800 beds, Hospital Clínic (HC) and Hospital de la Santa Creu i Sant Pau (HSCSP) address this issue. In the HSCSP, 87% of the department chairs are men and 85% of the department unit chiefs are also men. With respect to women, only 5 (13%) are in the top position (department chair) and 4 (15%) are department unit chiefs. Similar statistics are also found at the HC: 87% of the department chairs and 89% of the department unit chiefs are men. Currently, only 6 women (13%) are in the top position and 6 (11%) are department unit chiefs. Analysis of the 2002 data of internal promotions in HC showed that for the first level (senior specialist) sex distribution was similar. Nevertheless, for the second level (consultant) only 25% were women, and for the top level (senior consultant) only 8% were women. These proportions have not changed in 2007 in spite of a 10% increase in leadership positions during this period. Similar proportions were found in HSCSP where 68% of the top promotions were held by men. The data obtained from these two different medical institutions in Barcelona are probably representative of other hospitals in Spain. It would be ethically desirable to have males and females in leadership positions in the medical profession.

  14. Three Decades of Field Experiments Show Minimal Variability in Maximum Preferential Flow Speed

    NASA Astrophysics Data System (ADS)

    Nimmo, J. R.

    2005-12-01

    Evaluation of about 50 published field tests shows that the maximum transport speed in macropores and other preferential channels varies surprisingly little. The tests differ substantially: in type of medium, including fractured rock and various soil textures; in travel distance, ranging from less than 1 to more than 1000 m; in type of tracer; and in vertical or horizontal flow direction. One factor that significantly affects transport speed is the supply of water that generates the flow. Continuous application of water at the land surface, such as ponding or steady irrigation, as opposed to a sporadic supply such as natural rainfall, causes preferential flow that is faster and that varies less among studies. For continuously supplied water, nearly all observations of maximum transport speed fall between 1 and 100 m/d, suggesting that a value in that range could serve as a guideline for expected transport speed under comparable conditions. For sporadically applied water, if transport speeds are adjusted by a factor equal to the fraction of time during which water is applied, the adjusted values also fall in a range of about 1 to 100 m/d. Results suggest that in some common modes of preferential flow, certain mechanisms tend to compensate for factors that would normally cause substantial differences in flow rate. For example, an increase in water content within an unsaturated fracture may not affect the speed of solute transport in thick films if the greater water content is accommodated not by changing film thickness but by covering a larger portion of fracture-wall surface. The generalization that certain transport speeds are predictable to a large extent from water input conditions may improve the reliability and ease of predicting worst-case contaminant travel times and other quantities of hydrologic importance.

  15. Crystallization Experiments of the Martian Meteorite QUE94201: Additional Constraints on Its Formation Condition

    NASA Technical Reports Server (NTRS)

    Koizumi, E.; McKay, G.; Mikouchi, T.; Le, L.; Schwandt, C.; Monkawa, A.; Miyamoto, M.

    2002-01-01

    We focused on the Al/Ti ratio in synthetic pyroxenes as a marker for the onset of plagioclase crystallization and discuss the effects of oxygen fugacity on the Kd(Fe/Mg)ol/gl in our experiments using the same composition of QUE94201. Additional information is contained in the original extended abstract.

  16. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    USGS Publications Warehouse

    Hall, R.O.; Tank, J.L.; Sobota, D.J.; Mulholland, P.J.; O'Brien, J. M.; Dodds, W.K.; Webster, J.R.; Valett, H.M.; Poole, G.C.; Peterson, B.J.; Meyer, J.L.; McDowell, W.H.; Johnson, S.L.; Hamilton, S.K.; Grimm, N. B.; Gregory, S.V.; Dahm, Clifford N.; Cooper, L.W.; Ashkenas, L.R.; Thomas, S.M.; Sheibley, R.W.; Potter, J.D.; Niederlehner, B.R.; Johnson, L.T.; Helton, A.M.; Crenshaw, C.M.; Burgin, A.J.; Bernot, M.J.; Beaulieu, J.J.; Arangob, C.P.

    2009-01-01

    We measured uptake length of 15NO-3 in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO-3 uptake length. As part of the Lotic Intersite Nitrogen eXperiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO-3 concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO-3 uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S Wtot). Uptake length increased with specific discharge (Q/w) and increasing NO-3 concentrations, showing a loss in removal efficiency in streams with high NO-3 concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO-3 removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO-3 uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO-3 uptake lengths via directly increasing both gross primary production and NO-3 concentration. Gross primary production shortened SWtot, while increasing NO-3 lengthened SWtot resulting in no net effect of land use on NO- 3 removal. ?? 2009.

  17. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Tank, Jennifer; Sobota, Daniel; O'Brien, Jon; Webster, Jackson; Valett, H. Maurice; Dodds, Walter; Poole, Geoff; Peterson, Chris G.; Meyer, Judy; McDowell, William; Johnson, Sherri; Hamilton, Stephen; Gregory, Stanley; Grimm, Nancy; Dahm, Cliff; Cooper, Lee W; Ashkenas, Linda; Thomas, Suzanne; Sheibley, Rich; Potter, Jody; Niederlehner, Bobbie; Johnson, Laura; Helton, Ashley; Crenshaw, Chelsea; Burgin, Amy; Bernot, Melody; Beaulieu, Jake; Arango, Clay

    2009-01-01

    We measured uptake length of {sup 15}NO{sub 3}{sup -} in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO{sub 3}{sup -} uptake length. As part of the Lotic Intersite Nitrogen Experiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO{sub 3}{sup -} concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO{sub 3}{sup -} uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S{sub Wtot}). Uptake length increased with specific discharge (Q/w) and increasing NO{sub 3}{sup -} concentrations, showing a loss in removal efficiency in streams with high NO{sub 3}{sup -} concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO{sub 3}{sup -} removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO{sub 3}{sup -} uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO{sub 3}{sup -} uptake lengths via directly increasing both gross primary production and NO{sub 3}{sup -} concentration. Gross primary production shortened S{sub Wtot}, while increasing NO{sub 3}{sup -} lengthened S{sub Wtot} resulting in no net effect of land use on NO{sub 3}{sup -} removal.

  18. Sensitivity of Arctic Permafrost Carbon in the Mackenzie River Basin: A substrate addition and incubation experiment

    NASA Astrophysics Data System (ADS)

    Hedgpeth, A.; Beilman, D.; Crow, S. E.

    2014-12-01

    Arctic soil organic matter (SOM) mineralization processes are fundamental to the functioning of high latitude soils in relation to nutrients, stability, and feedbacks to atmospheric CO2 and climate. The arctic permafrost zone covers 25% of the northern hemisphere and contains 1672Pg of soil carbon (C). 88% of this C currently resides in frozen soils that are vulnerable to environmental change. For instance, arctic growing seasons may be lengthened, resulting in an increase in plant productivity and rate of below ground labile C inputs as root exudates. Understanding controls on Arctic SOM dynamics requires recognition that labile C inputs have the potential to significantly affect mineralization of previously stable SOM, also known as 'priming effects'. We conducted a substrate addition incubation experiment to quantify and compare respiration in highly organic (42-48 %C) permafrost soils along a north-south transect in western Canada. Near surface soils (10-20 cm) were collected from permafrost peatland sites in the Mackenzie River Basin from 69.2-62.6°N. The surface soils are fairly young (Δ14C values > -140.0) and can be assumed to contain relatively reactive soil carbon. To assess whether addition of labile substrate alters SOM decomposition dynamics, 4.77-11.75 g of permafrost soil were spiked with 0.5 mg D-glucose g-1 soil and incubated at 5°C. A mass balance approach was used to determin substrate-induced respiration and preliminary results suggest a potential for positive priming in these C-rich soils. Baseline respiration rates from the three sites were similar (0.067-0.263 mg CO2 g-1 soil C) yet show some site-specific trends. The rate at which added substrate was utilized within these soils suggests that other factors besides temperature and soil C content are controlling substrate consumption and its effect on SOM decomposition. Microbial activity can be stimulated by substrate addition to such an extent that SOM turnover is enhanced, suggesting that

  19. Additive Routes to Action Learning: Layering Experience Shapes Engagement of the Action Observation Network

    PubMed Central

    Kirsch, Louise P.; Cross, Emily S.

    2015-01-01

    The way in which we perceive others in action is biased by one's prior experience with an observed action. For example, we can have auditory, visual, or motor experience with actions we observe others perform. How action experience via 1, 2, or all 3 of these modalities shapes action perception remains unclear. Here, we combine pre- and post-training functional magnetic resonance imaging measures with a dance training manipulation to address how building experience (from auditory to audiovisual to audiovisual plus motor) with a complex action shapes subsequent action perception. Results indicate that layering experience across these 3 modalities activates a number of sensorimotor cortical regions associated with the action observation network (AON) in such a way that the more modalities through which one experiences an action, the greater the response is within these AON regions during action perception. Moreover, a correlation between left premotor activity and participants' scores for reproducing an action suggests that the better an observer can perform an observed action, the stronger the neural response is. The findings suggest that the number of modalities through which an observer experiences an action impacts AON activity additively, and that premotor cortical activity might serve as an index of embodiment during action observation. PMID:26209850

  20. Cannabinoid receptor 1 antagonist treatment induces glucagon release and shows an additive therapeutic effect with GLP-1 agonist in diet-induced obese mice.

    PubMed

    Patel, Kartikkumar Navinchandra; Joharapurkar, Amit Arvind; Patel, Vishal; Kshirsagar, Samadhan Govind; Bahekar, Rajesh; Srivastava, Brijesh Kumar; Jain, Mukul R

    2014-12-01

    Cannabinoid 1 (CB1) receptor antagonists reduce body weight and improve insulin sensitivity. Preclinical data indicates that an acute dose of CB1 antagonist rimonabant causes an increase in blood glucose. A stable analog of glucagon-like peptide 1 (GLP-1), exendin-4 improves glucose-stimulated insulin secretion in pancreas, and reduces appetite through activation of GLP-1 receptors in the central nervous system and liver. We hypothesized that the insulin secretagogue effect of GLP-1 agonist exendin-4 may synergize with the insulin-sensitizing action of rimonabant. Intraperitoneal as well as intracerebroventricular administration of rimonabant increased serum glucose upon glucose challenge in overnight fasted, diet-induced obese C57 mice, with concomitant rise in serum glucagon levels. Exendin-4 reversed the acute hyperglycemia induced by rimonabant. The combination of exendin-4 and rimonabant showed an additive effect in the food intake, and sustained body weight reduction upon repeated dosing. The acute efficacy of both the compounds was additive for inducing nausea-like symptoms in conditioned aversion test in mice, whereas exendin-4 treatment antagonized the effect of rimonabant on forced swim test upon chronic dosing. Thus, the addition of exendin-4 to rimonabant produces greater reduction in food intake owing to increased aversion, but reduces the other central nervous system side effects of rimonabant. The hyperglucagonemia induced by rimonabant is partially responsible for enhancing the antiobesity effect of exendin-4. PMID:25361428

  1. Stories from the trenches: Experiences of Alberta pharmacists in obtaining additional prescribing authority

    PubMed Central

    Charrois, Theresa; Rosenthal, Meagen; Tsuyuki, Ross T.

    2012-01-01

    Background: Pharmacists in Alberta can apply to the Alberta College of Pharmacists in order to obtain the designation of additional prescriber. This designation uniquely allows them to initiate therapy, in addition to other medication-related activities. Our objective was to examine specific experiences of pharmacists regarding the decision to apply and the application itself, and use this information to help inform other pharmacists who are considering additional prescribing. Methods: All pharmacists involved in a randomized, controlled trial being conducted in rural Alberta who had received their additional prescribing authorization (APA) were invited to participate. Pharmacists were contacted via e-mail and asked to respond to questions regarding their experiences in applying for APA. Responses were analyzed using content analysis and the identites of all respondents were kept anonymous. Results: Fourteen pharmacists were invited to participate. Review and examination of the responses revealed 3 main themes: motivation, hurdles and outcomes. Motivation can be understood as the reasons why they applied for their APA. Hurdles include any problems encountered of a personal, environmental or professional nature. Outcomes refer to how this designation has changed their practice. Discussion: Pharmacists had to address many factors that were unexpected during the application process; however, the eventual outcome of obtaining APA was deemed beneficial, both professionally and with regard to patient care. Conclusion: The information shared from these pharmacists will help other pharmacists, regardless of jurisdiction, overcome some of the challenges associated with obtaining advanced prescribing privileges. PMID:23509485

  2. Aortic arch calcification on chest X-ray combined with coronary calcium score show additional benefit for diagnosis and outcome in patients with angina

    PubMed Central

    Woo, Jong Shin; Kim, Weon; Kwon, Se Hwan; Youn, Hyo Chul; Kim, Hyun Soo; Kim, Jin Bae; Kim, Soo Joong; Kim, Woo-Shik; Kim, Kwon Sam

    2016-01-01

    Background The coronary artery calcium (CAC) and aortic arch calcification (AoAC) are individually associated with cardiovascular disease and outcome. This study investigated the predictive value of AoAC combined with CAC for cardiovascular diagnosis and outcome in patients with angina. Methods A total of 2018 stable angina patients who underwent chest X-ray and cardiac multi-detector computed tomography were followed up for four years to assess adverse events, which were categorized as cardiac death, stroke, myocardial infarction, or repeated revascularization. The extent of AoAC on chest X-ray was graded on a scale from 0 to 3. Results During the four years of follow-up, 620 patients were treated by coronary stenting and 153 (7%) adverse events occurred. A higher grade of AoAC was associated with a higher CAC score. Cox regression showed that the CAC score, but not AoAC, were associated with adverse events. In patients with CAC score < 400, AoAC showed an additive predictive value in detecting significant coronary artery disease (CAD). A gradual increases in the risk of adverse events were noted if AoAC was present in patients with similar CAC score. Conclusions As AoAC is strongly correlated with the CAC score regardless of age or gender, careful evaluation of CAD would be required in patients with AoAC on conventional chest X-rays. PMID:27103916

  3. Spinel dissolution via addition of glass forming chemicals. Results of preliminary experiments

    SciTech Connect

    Fox, K. M.; Johnson, F. C.

    2015-11-01

    Increased loading of high level waste in glass can lead to crystallization within the glass. Some crystalline species, such as spinel, have no practical impact on the chemical durability of the glass, and therefore may be acceptable from both a processing and a product performance standpoint. In order to operate a melter with a controlled amount of crystallization, options must be developed for remediating an unacceptable accumulation of crystals. This report describes preliminary experiments designed to evaluate the ability to dissolve spinel crystals in simulated waste glass melts via the addition of glass forming chemicals (GFCs).

  4. F-18 SRA closeup of nose cap showing L-Probe experiment and standard air data sensors

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This under-the-nose view of a modified F-18 Systems Research Aircraft at NASA's Dryden Flight Research Center, Edwards, California, shows three critical components of the aircraft's air data systems which are mounted on both sides of the forward fuselage. Furthest forward are two L-probes that were the focus of the recent Advanced L-probe Air Data Integration (ALADIN) experiment. Behind the L-probes are angle-of-attack vanes, while below them are the aircraft's standard pitot-static air data probes. The ALADIN experiment focused on providing pilots with angle-of-attack and angle-of-sideslip air data as well as traditional airspeed and altitude information, all from a single system. Once fully developed, the new L-probes have the potential to give pilots more accurate air data information with less hardware.

  5. Impacts of Asian Dust and Haze Particles Addition on Phytoplankton in Incubation Experiments in the Yellow Sea of China

    NASA Astrophysics Data System (ADS)

    Gao, H.; Zhang, C.; Liu, Y.; Shi, J.; Yao, X.

    2014-12-01

    Atmospheric deposition (AD) induced by dust events and air pollutants has been considered as an important source of bio-available nutrients such as N, P, Si and trace metals (e.g., Fe, Cu, Pb) to the oceans. The coastal seas of China are severely affected by AD from Asian dust events and haze episodes, especially in spring and winter. In this study, several on-board incubation experiments were performed in the Yellow Sea of China during 2011 - 2014, to explore the responses of micro-, nano- and pico-phytoplankton to various combinations of Asian dust, nutrients and haze particles by measuring the size-fractionated chlorophyll a (Chl a) concentration. In the experiments of Asian dust addition, the concentration of Chl a and the conversion efficiency index of N into Chl a increased by up to ~40 % and ~30 %, respectively, compared to the control, showing enhancement effects on the growth of phytoplankton. The addition of haze particles exhibited more obvious promotions of pico-phytoplankton growth, but more severe inhibitions of micro-phytoplankton growth than other treatments. The incubation experiments conducted in the Yellow Sea also indicated P limitation variations in spring and summer. It was inferred that both Asian dust and haze particles additions had significant impacts on the growth and structure of phytoplankton by modulating the limiting factors.

  6. Hill-type muscle model parameters determined from experiments on single muscles show large animal-to-animal variation.

    PubMed

    Blümel, Marcus; Guschlbauer, Christoph; Daun-Gruhn, Silvia; Hooper, Scott L; Büschges, Ansgar

    2012-11-01

    Models built using mean data can represent only a very small percentage, or none, of the population being modeled, and produce different activity than any member of it. Overcoming this "averaging" pitfall requires measuring, in single individuals in single experiments, all of the system's defining characteristics. We have developed protocols that allow all the parameters in the curves used in typical Hill-type models (passive and active force-length, series elasticity, force-activation, force-velocity) to be determined from experiments on individual stick insect muscles (Blümel et al. 2012a). A requirement for means to not well represent the population is that the population shows large variation in its defining characteristics. We therefore used these protocols to measure extensor muscle defining parameters in multiple animals. Across-animal variability in these parameters can be very large, ranging from 1.3- to 17-fold. This large variation is consistent with earlier data in which extensor muscle responses to identical motor neuron driving showed large animal-to-animal variability (Hooper et al. 2006), and suggests accurate modeling of extensor muscles requires modeling individual-by-individual. These complete characterizations of individual muscles also allowed us to test for parameter correlations. Two parameter pairs significantly co-varied, suggesting that a simpler model could as well reproduce muscle response.

  7. Male mice housed in groups engage in frequent fighting and show a lower response to additional bone loading than females or individually housed males that do not fight.

    PubMed

    Meakin, Lee B; Sugiyama, Toshihiro; Galea, Gabriel L; Browne, William J; Lanyon, Lance E; Price, Joanna S

    2013-05-01

    Experiments to investigate bone's physiological adaptation to mechanical loading frequently employ models that apply dynamic loads to bones in vivo and assess the changes in mass and architecture that result. It is axiomatic that bones will only show an adaptive response if the applied artificial loading environment differs in a significant way from that to which the bones have been habituated by normal functional loading. It is generally assumed that this normal loading is similar between experimental groups. In the study reported here we found that this was not always the case. Male and female 17-week-old C57BL/6 mice were housed in groups of six, and a single episode (40 cycles) of non-invasive axial loading, engendering 2,200 με on the medial surface of the proximal tibiae in sample mice, was applied to right tibiae on alternate days for two weeks. This engendered an adaptive increase in bone mass in females, but not males. Observation revealed the main difference in behaviour between males and females was that males were involved in fights 1.3 times per hour, whereas the females never fought. We therefore housed all mice individually. In females, there was a similar significant osteogenic response to loading in cortical and trabecular bone of both grouped and individual mice. In contrast, in males, adaptive increases in the loaded compared with non-loaded control bones was only apparent in animals housed individually. Our interpretation of these findings is that the frequent vigorous fighting that occurs between young adult males housed in groups could be sufficient to engender peak strains and strain rates that equal or exceed the stimulus derived from artificial loading. This indicates the importance of ensuring that physical activity is consistent between groups. Reducing the background level of the naturally engendered strain environment allows adaptive responses to artificial loading to be demonstrated at lower loads.

  8. Na+ and Cl(-) ions show additive effects under NaCl stress on induction of oxidative stress and the responsive antioxidative defense in rice.

    PubMed

    Khare, Tushar; Kumar, Vinay; Kishor, P B Kavi

    2015-07-01

    Despite the fact that when subjected to salinity stress most plants accumulate high concentrations of sodium (Na(+)) and chloride (Cl(-)) ions in their tissues, major research has however been focused on the toxic effects of Na(+). Consequently, Cl(-) toxicity mechanisms in annual plants, particularly in inducing oxidative stress, are poorly understood. Here, the extent to which Na(+) and/or Cl(-) ions contribute in inducing oxidative stress and regulating the adaptive antioxidant defense is shown in two Indica rice genotypes differing in their salt tolerance. Equimolar (100 mM) concentrations of Na(+), Cl(-), and NaCl (EC ≈ 10 dS m(-1)) generated free-radical (O2 (•-), (•)OH) and non-radical (H2O2) forms of reactive oxygen species (ROS) and triggered cell death in leaves of 21-day-old hydroponically grown rice seedlings as evident by spectrophotometric quantifications and histochemical visualizations. The magnitude of ROS-mediated oxidative damage was higher in sensitive cultivar, whereas NaCl proved to be most toxic among the treatments. Salt treatments significantly increased activities of antioxidant enzymes and their isozymes including superoxide dismutase, catalase, peroxidase, ascorbate peroxidase, and glutathione reductase. Na(+) and Cl(-) ions showed additive effects under NaCl in activating the antioxidant enzyme machinery, and responses were more pronounced in tolerant cultivar. The expression levels of SodCc2, CatA, and OsPRX1 genes were largely consistent with the activities of their corresponding enzymes. Salt treatments caused an imbalance in non-enzymatic antioxidants ascorbic acid, α-tocopherol, and polyphenols, with greater impacts under NaCl than Na(+) and Cl(-) separately. Results revealed that though Cl(-) was relatively less toxic than its counter-cation, its effects cannot be totally ignored. Both the cultivars responded in the same manner, but the tolerant cultivar maintained lower Na(+)/K(+) and ROS levels coupled with better

  9. Additional experiments on flowability improvements of aviation fuels at low temperatures, volume 2

    NASA Technical Reports Server (NTRS)

    Stockemer, F. J.; Deane, R. L.

    1982-01-01

    An investigation was performed to study flow improver additives and scale-model fuel heating systems for use with aviation hydrocarbon fuel at low temperatures. Test were performed in a facility that simulated the heat transfer and temperature profiles anticipated in wing fuel tanks during flight of long-range commercial aircraft. The results are presented of experiments conducted in a test tank simulating a section of an outer wing integral fuel tank approximately full-scale in height, chilled through heat exchange panels bonded to the upper and lower horizontal surfaces. A separate system heated lubricating oil externally by a controllable electric heater, to transfer heat to fuel pumped from the test tank through an oil-to-fuel heat exchanger, and to recirculate the heated fuel back to the test tank.

  10. Modification of sandy soil hydrophysical environment through bagasse additive under laboratory experiment

    NASA Astrophysics Data System (ADS)

    Abd El-Halim, A. A.; Kumlung, Arunsiri

    2015-01-01

    Until now sandy soils can be considered as one roup having common hydrophysical problems. Therefore, a laboratory experiment was conducted to evaluate the influence of bagasse as an amendment to improve hydrophysical properties of sandy soil, through the determination of bulk density, aggregatesize distribution, total porosity, hydraulic conductivity, pore-space structure and water retention. To fulfil this objective, sandy soils were amended with bagasse at the rate of 0, 0.5, 1, 2, 3 and 4% on the dry weight basis. The study results demonstrated that the addition of bagasse to sandy soils in between 3 to 4% on the dry weight basis led to a significant decrease in bulk density, hydraulic conductivity, and rapid-drainable pores, and increase in the total porosity, water-holding pores, fine capillary pores, water retained at field capacity, wilting point, and soil available water as compared with the control treatment

  11. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis

    NASA Astrophysics Data System (ADS)

    Hensen, B.; Kalb, N.; Blok, M. S.; Dréau, A. E.; Reiserer, A.; Vermeulen, R. F. L.; Schouten, R. N.; Markham, M.; Twitchen, D. J.; Goodenough, K.; Elkouss, D.; Wehner, S.; Taminiau, T. H.; Hanson, R.

    2016-08-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682–686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator.

  12. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis

    PubMed Central

    Hensen, B.; Kalb, N.; Blok, M. S.; Dréau, A. E.; Reiserer, A.; Vermeulen, R. F. L.; Schouten, R. N.; Markham, M.; Twitchen, D. J.; Goodenough, K.; Elkouss, D.; Wehner, S.; Taminiau, T. H.; Hanson, R.

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682–686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  13. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis.

    PubMed

    Hensen, B; Kalb, N; Blok, M S; Dréau, A E; Reiserer, A; Vermeulen, R F L; Schouten, R N; Markham, M; Twitchen, D J; Goodenough, K; Elkouss, D; Wehner, S; Taminiau, T H; Hanson, R

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682-686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  14. Perfluorocarbon Tracer Experiments on a 2 km Scale in Manchester Showing Ingress of Pollutants into a Building

    NASA Astrophysics Data System (ADS)

    Matthews, James; Wright, Matthew; Bacak, Asan; Silva, Hugo; Priestley, Michael; Martin, Damien; Percival, Carl; Shallcross, Dudley

    2016-04-01

    th floor of the Simon Building from a release 1.9 km away. One experiment sampled for an additional two 30 minute periods in four locations inside and one location outside the Simon Building in order to investigate how long it took for air to enter and leave the building. For this measurement, 1.3 g of PMCH was released 1.9 km away and average roof level wind speed was 7.8 m/s. The highest measurement of PMCH outside was 54 ppq above background, and 46 ppq inside. After the first 30 minutes, the PFC concentration returned to background levels outside, but other internal rooms still had elevated PFC concentrations between 10 and 16 ppq above background an hour after release demonstrating that pollutants may persist within buildings having passed outside. In the final experiment, the wind direction changed so the sampling locations were not directly downwind of the release point, but nevertheless a small amount of PFC tracer above background was detected at the highest sampling point on the 6th floor of the Simon Building (14 ppq above background), and a smaller amount at street level.

  15. Maps showing mines, quarries, oil and gas activity, and sample localities in and near the Sipsey Wilderness and additions, Lawrence and Winston Counties, Alabama

    SciTech Connect

    Mory, P.C.; Behum, P.T.; Ross, R.B. Jr.

    1982-01-01

    This report presents the results of a mineral survey of the Sipsey Wilderness and additions, William B. Bankhead National Forest, Lawrence and Winston Counties, Alabama. The survey includes: limestone quarrying, coal mining, and oil and gas activity. 7 references, 5 figures, 2 tables.

  16. Pressurized laboratory experiments show no stable carbon isotope fractionation of methane during gas hydrate dissolution and dissociation.

    PubMed

    Lapham, Laura L; Wilson, Rachel M; Chanton, Jeffrey P

    2012-01-15

    The stable carbon isotopic ratio of methane (δ(13)C-CH(4)) recovered from marine sediments containing gas hydrate is often used to infer the gas source and associated microbial processes. This is a powerful approach because of distinct isotopic fractionation patterns associated with methane production by biogenic and thermogenic pathways and microbial oxidation. However, isotope fractionations due to physical processes, such as hydrate dissolution, have not been fully evaluated. We have conducted experiments to determine if hydrate dissolution or dissociation (two distinct physical processes) results in isotopic fractionation. In a pressure chamber, hydrate was formed from a methane gas source at 2.5 MPa and 4 °C, well within the hydrate stability field. Following formation, the methane source was removed while maintaining the hydrate at the same pressure and temperature which stimulated hydrate dissolution. Over the duration of two dissolution experiments (each ~20-30 days), water and headspace samples were periodically collected and measured for methane concentrations and δ(13)C-CH(4) while the hydrate dissolved. For both experiments, the methane concentrations in the pressure chamber water and headspace increased over time, indicating that the hydrate was dissolving, but the δ(13)C-CH(4) values showed no significant trend and remained constant, within 0.5‰. This lack of isotope change over time indicates that there is no fractionation during hydrate dissolution. We also investigated previous findings that little isotopic fractionation occurs when the gas hydrate dissociates into gas bubbles and water due to the release of pressure. Over a 2.5 MPa pressure drop, the difference in the δ(13)C-CH(4) was <0.3‰. We have therefore confirmed that there is no isotope fractionation when the gas hydrate dissociates and demonstrated that there is no fractionation when the hydrate dissolves. Therefore, measured δ(13)C-CH(4) values near gas hydrates are not affected

  17. Experiments to Populate and Validate a Processing Model for Polyurethane Foam: Additional Data for Structural Foams.

    SciTech Connect

    Rao, Rekha R.; Celina, Mathias C.; Giron, Nicholas Henry; Long, Kevin Nicholas; Russick, Edward M.

    2015-01-01

    We are developing computational models to help understand manufacturing processes, final properties and aging of structural foam, polyurethane PMDI. Th e resulting model predictions of density and cure gradients from the manufacturing process will be used as input to foam heat transfer and mechanical models. BKC 44306 PMDI-10 and BKC 44307 PMDI-18 are the most prevalent foams used in structural parts. Experiments needed to parameterize models of the reaction kinetics and the equations of motion during the foam blowing stages were described for BKC 44306 PMDI-10 in the first of this report series (Mondy et al. 2014). BKC 44307 PMDI-18 is a new foam that will be used to make relatively dense structural supports via over packing. It uses a different catalyst than those in the BKC 44306 family of foams; hence, we expect that the reaction kineti cs models must be modified. Here we detail the experiments needed to characteriz e the reaction kinetics of BKC 44307 PMDI-18 and suggest parameters for the model based on these experiments. In additi on, the second part of this report describes data taken to provide input to the preliminary nonlinear visco elastic structural response model developed for BKC 44306 PMDI-10 foam. We show that the standard cu re schedule used by KCP does not fully cure the material, and, upon temperature elevation above 150 o C, oxidation or decomposition reactions occur that alter the composition of the foam. These findings suggest that achieving a fully cured foam part with this formulation may be not be possible through therma l curing. As such, visco elastic characterization procedures developed for curing thermosets can provide only approximate material properties, since the state of the material continuously evolves during tests.

  18. Additions and Improvements to the FLASH Code for Simulating High Energy Density Physics Experiments

    NASA Astrophysics Data System (ADS)

    Lamb, D. Q.; Daley, C.; Dubey, A.; Fatenejad, M.; Flocke, N.; Graziani, C.; Lee, D.; Tzeferacos, P.; Weide, K.

    2015-11-01

    FLASH is an open source, finite-volume Eulerian, spatially adaptive radiation hydrodynamics and magnetohydrodynamics code that incorporates capabilities for a broad range of physical processes, performs well on a wide range of computer architectures, and has a broad user base. Extensive capabilities have been added to FLASH to make it an open toolset for the academic high energy density physics (HEDP) community. We summarize these capabilities, with particular emphasis on recent additions and improvements. These include advancements in the optical ray tracing laser package, with methods such as bi-cubic 2D and tri-cubic 3D interpolation of electron number density, adaptive stepping and 2nd-, 3rd-, and 4th-order Runge-Kutta integration methods. Moreover, we showcase the simulated magnetic field diagnostic capabilities of the code, including induction coils, Faraday rotation, and proton radiography. We also describe several collaborations with the National Laboratories and the academic community in which FLASH has been used to simulate HEDP experiments. This work was supported in part at the University of Chicago by the DOE NNSA ASC through the Argonne Institute for Computing in Science under field work proposal 57789; and the NSF under grant PHY-0903997.

  19. Additive Manufacturing, Design, Testing, and Fabrication: A Full Engineering Experience at JSC

    NASA Technical Reports Server (NTRS)

    Zusack, Steven

    2016-01-01

    I worked on several projects this term. While most projects involved additive manufacturing, I was also involved with two design projects, two testing projects, and a fabrication project. The primary mentor for these was Richard Hagen. Secondary mentors were Hai Nguyen, Khadijah Shariff, and fabrication training from James Brown. Overall, my experience at JSC has been successful and what I have learned will continue to help me in my engineering education and profession long after I leave. My 3D printing projects ranged from less than a 1 cubic centimeter to about 1 cubic foot and involved several printers using different printing technologies. It was exciting to become familiar with printing technologies such as industrial grade FDM (Fused Deposition Modeling), the relatively new SLA (Stereolithography), and PolyJet. My primary duty with the FDM printers was to model parts that came in from various sources to print effectively and efficiently. Using methods my mentor taught me and the Stratasys Insight software, I was able to minimize imperfections, hasten build time, improve strength for specific forces (tensile, shear, etc...), and reduce likelihood of a print-failure. Also using FDM, I learned how to repair a part after it was printed. This is done by using a special kind of glue that chemically melts the two faces of plastic parts together to form a fused interface. My first goal with SLA technology was to bring the printer back to operational readiness. In becoming familiar with the Pegasus SLA printer, I researched the leveling, laser settings, and different vats to hold liquid material. With this research, I was successfully able to bring the Pegasus back online and have successfully printed multiple sample parts as well as functional parts. My experience with PolyJet technology has been focused on an understanding of the abilities/limits, costs, and the maintenance for daily use. Still upcoming will be experience with using a composite printer that uses FDM

  20. Automated microbial metabolism laboratory. [design of advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into test chambers

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The design and rationale of an advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into each of four test chambers are outlined. The feasibility for multiple addition tests was established and various details of the methodology were studied. The four chamber battery of tests include: (1) determination of the effect of various atmospheric gases and selection of that gas which produces an optimum response; (2) determination of the effect of incubation temperature and selection of the optimum temperature for performing Martian biochemical tests; (3) sterile soil is dosed with a battery of C-14 labeled substrates and subjected to experimental temperature range; and (4) determination of the possible inhibitory effects of water on Martian organisms is performed initially by dosing with 0.01 ml and 0.5 ml of medium, respectively. A series of specifically labeled substrates are then added to obtain patterns in metabolic 14CO2 (C-14)O2 evolution.

  1. A combination of a dairy product fermented by lactobacilli and galactooligosaccharides shows additive effects on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor.

    PubMed

    Takasugi, Satoshi; Ashida, Kinya; Maruyama, Suyaka; Matsukiyo, Yukari; Kaneko, Tetsuo; Yamaji, Taketo

    2013-06-01

    This study aimed to investigate the effects of a combination of a dairy product fermented by lactobacilli (DFL) and galactooligosaccharides (GOS) on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor (PPI). Three-week-old male rats were assigned to receive one of six diets: a control diet, control diets containing 1.6 or 5.0 % GOS, a DFL diet and DFL diets containing 1.6 or 5.0 % GOS for 9 days. From day 5 of the feeding period, half of the rats fed with control diets were subcutaneously administered with saline, whereas the remaining rats were administered with PPI for 5 days. Calcium (Ca), phosphorus (P), magnesium (Mg), iron (Fe) and zinc (Zn) balances were determined from days 6 to 9. PPI administration significantly decreased the apparent absorption of Ca and Fe and increased urinary P excretion, resulting in decreased Ca, Fe and P retention. GOS dose-dependently increased the apparent absorption of Ca, Mg and Fe and urinary Mg excretion and decreased urinary P excretion. DFL significantly increased the apparent absorption of Ca and Mg and urinary Mg excretion. The combination of DFL and GOS additively affected these parameters, resulting in increased Ca, P and Fe retention, and it further increased the apparent absorption and retention of Zn at 5.0 % GOS. In conclusion, the combination of DFL and GOS improves Ca, P and Fe retention in an additive manner and increases the Zn retention in growing rats with hypochlorhydria induced by PPI.

  2. Summary and overview of the CYCLOPS P addition Lagrangian experiment in the Eastern Mediterranean

    NASA Astrophysics Data System (ADS)

    Krom, M. D.; Thingstad, T. F.; Brenner, S.; Carbo, P.; Drakopoulos, P.; Fileman, T. W.; Flaten, G. A. F.; Groom, S.; Herut, B.; Kitidis, V.; Kress, N.; Law, C. S.; Liddicoat, M. I.; Mantoura, R. F. C.; Pasternak, A.; Pitta, P.; Polychronaki, T.; Psarra, S.; Rassoulzadegan, F.; Skjoldal, E. F.; Spyres, G.; Tanaka, T.; Tselepides, A.; Wassmann, P.; Wexels Riser, C.; Woodward, E. M. S.; Zodiatis, G.; Zohary, T.

    2005-11-01

    CYCLOPS was a European Framework 5 program to further our understanding of phosphorus cycling in the Eastern Mediterranean. The core of CYCLOPS was a Lagrangian experiment in which buffered phosphoric acid was added to a <4×4 km patch of water together with SF 6 as the inert tracer. The patch was followed for nine days in total. Results obtained prior to the experiment showed that the system was typically ultra-oligotrophic and P-starved with DON:DOP, PON:POP and DIN:DIP all having ratios greatly in excess of 16:1 in surface waters. To our surprise, we found that although the added phosphate was rapidly taken up by the microbial biota, there was a small but significant decrease in chlorophyll a and no increase in primary production, together with an increase in heterotrophic bacterial activity, ciliate numbers and in the gut fullness and egg numbers in the zooplankton community. A microcosm experiment carried out using within-patch and out-of-patch water showed that the phytoplankton community were N and P co-limited while the bacteria and micrograzers were P-limited. Thus this system tends to N and P co-limitation of phytoplankton productivity in summer possibly caused by bioavailable DIN being converted into non-bioavailable forms of DON. On the basis of the data collected within the programme it was concluded that this behavior could be explained by three non-mutually exclusive processes described as (1) trophic by-pass in which the added phosphate gets directly to the grazing part of the predatory food chain from the heterotrophic bacteria bypassing the phytoplankton compartment phosphate, (2) trophic tunnelling in which phosphate is rapidly taken up by both phytoplankton and bacteria via rapid luxury consumption. This causes an immediate change in the phosphorus content but not the abundance of the prey organisms. The added P then "reappears" as responses at the predator level much more rapidly than expected, and (3) mixotrophic by-pass in which inorganic

  3. Axl Inhibition Primes Chronic Lymphocytic Leukemia B-Cells to Apoptosis and Show Synergistic/Additive Effects in Combination with BTK inhibitors

    PubMed Central

    Sinha, Sutapa; Boysen, Justin; Nelson, Michael; Secreto, Charla; Warner, Steven L.; Bearss, David J.; Lesnick, Connie; Shanafelt, Tait D.; Kay, Neil E.; Ghosh, Asish K.

    2015-01-01

    Purpose B-cell chronic lymphocytic leukemia (CLL) is an incurable disease despite aggressive therapeutic approaches. We previously found that Axl receptor tyrosine kinase (RTK) plays a critical role in CLL B-cell survival. Here, we explored the possibility of using a high-affinity Axl inhibitor as a single agent or in combination with Bruton’s tyrosine kinase (BTK) inhibitors for future clinical trial to treat CLL patients. Experimental Design Expression/activation status of other members of the TAM (Tyro3, Axl, MER) family of RTKs in CLL B-cells was evaluated. Cells were treated with a high-affinity orally bioavailable Axl inhibitor TP-0903 with or without presence of CLL bone marrow stromal cells (BMSCs). Inhibitory effects of TP-0903 on Axl signaling pathway was also evaluated in CLL B-cells. Finally, cells were exposed to TP-0903 in combination with BTK inhibitors to determine any synergistic/additive effects of the combination. Results CLL B-cells overexpress Tyro3, but not MER. Of interest, Tyro3 remains as constitutively phosphorylated and form a complex with Axl in CLL B-cells. TP-0903 induces massive apoptosis in CLL B-cells with LD50 values of nanomolar ranges. Importantly, CLL BMSCs could not protect the leukemic B-cells from TP-0903 induced apoptosis. A marked reduction of the anti-apoptotic proteins Mcl-1, Bcl-2, XIAP and upregulation of the pro-apoptotic protein BIM in CLL B-cells were detected as a result of Axl inhibition. Finally, combination of TP-0903 with BTK inhibitors augments CLL B-cell apoptosis. Conclusion Administration of TP-0903 either as a single agent or in combination with BTK inhibitors may be effective in treating CLL patients. PMID:25673699

  4. Effects of biochar addition to soil on nitrogen fluxes in a winter wheat lysimeter experiment

    NASA Astrophysics Data System (ADS)

    Hüppi, Roman; Leifeld, Jens; Neftel, Albrecht; Conen, Franz; Six, Johan

    2014-05-01

    Biochar is a carbon-rich, porous residue from pyrolysis of biomass that potentially increases crop yields by reducing losses of nitrogen from soils and/or enhancing the uptake of applied fertiliser by the crops. Previous research is scarce about biochar's ability to increase wheat yields in temperate soils or how it changes nitrogen dynamics in the field. In a lysimeter system with two different soils (sandy/silt loam) nitrogen fluxes were traced by isotopic 15N enriched fertiliser to identify changes in nitrous oxide emissions, leaching and plant uptake after biochar addition. 20t/ha woodchip-waste biochar (pH=13) was applied to these soils in four lysimeters per soil type; the same number of lysimeters served as a control. The soils were cropped with winter wheat during the season 2012/2013. 170 kg-N/ha ammonium nitrate fertiliser with 10% 15N was applied in 3 events during the growing season and 15N concentrations where measured at different points in time in plant, soil, leachate and emitted nitrous oxide. After one year the lysimeter system showed no difference between biochar and control treatment in grain- and straw yield or nitrogen uptake. However biochar did reduce nitrous oxide emissions in the silt loam and losses of nitrate leaching in sandy loam. This study indicates potential reduction of nitrogen loss from cropland soil by biochar application but could not confirm increased yields in an intensive wheat production system.

  5. The Additional-Mass Effect of Plates as Determined by Experiments

    NASA Technical Reports Server (NTRS)

    Gracey, William

    1941-01-01

    The apparent increase in the inertia properties of a body moving in a fluid medium has been called the additional-mass effect. This report presents a resume of test procedures and results of experimental determinations of the additional-mass effect of flat plates. In addition to data obtained from various foreign sources and from a NACA investigation in 1933, the results of tests recently conducted by the National Advisory Committee for Aeronautics are included.

  6. Nitrate removal in stream ecosystems measured by 15N addition experiments: 2. Denitrification

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Sobota, Daniel; Dodds, Walter; Findlay, Stuart; Grimm, Nancy; Hamilton, Stephen; McDowell, William; O'Brien, Jon; Tank, Jennifer; Ashkenas, Linda; Cooper, Lee W; Dahm, Cliff; Gregory, Stanley; Johnson, Sherri; Meyer, Judy; Peterson, Bruce; Poole, Geoff; Valett, H. Maurice; Webster, Jackson; Arango, Clay; Beaulieu, Jake; Bernot, Melody; Burgin, Amy; Crenshaw, Chelsea; Helton, Ashley; Johnson, Laura; Niederlehner, Bobbie; Potter, Jody; Sheibley, Rich; Thomas, Suzanne

    2009-01-01

    We measured denitrification rates using a field {sup 15}N-NO{sub 3}{sup -} tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (S{sub Wden}) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N{sub 2} production rates far exceeded N{sub 2}O production rates in all streams. The fraction of total NO{sub 3}{sup -} removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NH{sub 4}{sup +} concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling S{sub Wden} were specific discharge (discharge/width) and NO{sub 3}{sup -} concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (U{sub den}) and NO{sub 3}{sup -} concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although U{sub den} increased with increasing NO{sub 3}{sup -} concentration, the efficiency of NO{sub 3}{sup -} removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO{sub 3}{sup -} load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO{sub 3}{sup -} concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO{sub 3}{sup -} concentration.

  7. Nitrate removal in stream ecosystems measured by 15N addition experiments: Denitrification

    USGS Publications Warehouse

    Mulholland, P.J.; Hall, R.O.; Sobota, D.J.; Dodds, W.K.; Findlay, S.E.G.; Grimm, N. B.; Hamilton, S.K.; McDowell, W.H.; O'Brien, J. M.; Tank, J.L.; Ashkenas, L.R.; Cooper, L.W.; Dahm, Clifford N.; Gregory, S.V.; Johnson, S.L.; Meyer, J.L.; Peterson, B.J.; Poole, G.C.; Valett, H.M.; Webster, J.R.; Arango, C.P.; Beaulieu, J.J.; Bernot, M.J.; Burgin, A.J.; Crenshaw, C.L.; Helton, A.M.; Johnson, L.T.; Niederlehner, B.R.; Potter, J.D.; Sheibley, R.W.; Thomasn, S.M.

    2009-01-01

    We measured denitrification rates using a field 15N-NO- 3 tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (SWden) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N2 production rates far exceeded N2O production rates in all streams. The fraction of total NO-3 removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NHz 4 concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling SWden were specific discharge (discharge / width) and NO-3 concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (Uden) and NO- 3 concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although Uden increased with increasing NO- 3 concentration, the efficiency of NO-3 removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO-3 load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO-3 concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO-3 concentration. ?? 2009.

  8. Validation of RNAi Silencing Efficiency Using Gene Array Data shows 18.5% Failure Rate across 429 Independent Experiments

    PubMed Central

    Munkácsy, Gyöngyi; Sztupinszki, Zsófia; Herman, Péter; Bán, Bence; Pénzváltó, Zsófia; Szarvas, Nóra; Győrffy, Balázs

    2016-01-01

    No independent cross-validation of success rate for studies utilizing small interfering RNA (siRNA) for gene silencing has been completed before. To assess the influence of experimental parameters like cell line, transfection technique, validation method, and type of control, we have to validate these in a large set of studies. We utilized gene chip data published for siRNA experiments to assess success rate and to compare methods used in these experiments. We searched NCBI GEO for samples with whole transcriptome analysis before and after gene silencing and evaluated the efficiency for the target and off-target genes using the array-based expression data. Wilcoxon signed-rank test was used to assess silencing efficacy and Kruskal–Wallis tests and Spearman rank correlation were used to evaluate study parameters. All together 1,643 samples representing 429 experiments published in 207 studies were evaluated. The fold change (FC) of down-regulation of the target gene was above 0.7 in 18.5% and was above 0.5 in 38.7% of experiments. Silencing efficiency was lowest in MCF7 and highest in SW480 cells (FC = 0.59 and FC = 0.30, respectively, P = 9.3E−06). Studies utilizing Western blot for validation performed better than those with quantitative polymerase chain reaction (qPCR) or microarray (FC = 0.43, FC = 0.47, and FC = 0.55, respectively, P = 2.8E−04). There was no correlation between type of control, transfection method, publication year, and silencing efficiency. Although gene silencing is a robust feature successfully cross-validated in the majority of experiments, efficiency remained insufficient in a significant proportion of studies. Selection of cell line model and validation method had the highest influence on silencing proficiency. PMID:27673562

  9. Validation of RNAi Silencing Efficiency Using Gene Array Data shows 18.5% Failure Rate across 429 Independent Experiments.

    PubMed

    Munkácsy, Gyöngyi; Sztupinszki, Zsófia; Herman, Péter; Bán, Bence; Pénzváltó, Zsófia; Szarvas, Nóra; Győrffy, Balázs

    2016-01-01

    No independent cross-validation of success rate for studies utilizing small interfering RNA (siRNA) for gene silencing has been completed before. To assess the influence of experimental parameters like cell line, transfection technique, validation method, and type of control, we have to validate these in a large set of studies. We utilized gene chip data published for siRNA experiments to assess success rate and to compare methods used in these experiments. We searched NCBI GEO for samples with whole transcriptome analysis before and after gene silencing and evaluated the efficiency for the target and off-target genes using the array-based expression data. Wilcoxon signed-rank test was used to assess silencing efficacy and Kruskal-Wallis tests and Spearman rank correlation were used to evaluate study parameters. All together 1,643 samples representing 429 experiments published in 207 studies were evaluated. The fold change (FC) of down-regulation of the target gene was above 0.7 in 18.5% and was above 0.5 in 38.7% of experiments. Silencing efficiency was lowest in MCF7 and highest in SW480 cells (FC = 0.59 and FC = 0.30, respectively, P = 9.3E-06). Studies utilizing Western blot for validation performed better than those with quantitative polymerase chain reaction (qPCR) or microarray (FC = 0.43, FC = 0.47, and FC = 0.55, respectively, P = 2.8E-04). There was no correlation between type of control, transfection method, publication year, and silencing efficiency. Although gene silencing is a robust feature successfully cross-validated in the majority of experiments, efficiency remained insufficient in a significant proportion of studies. Selection of cell line model and validation method had the highest influence on silencing proficiency. PMID:27673562

  10. Hyperbaric oxygen therapy as additional treatment in deep sternal wound infections – a single center's experience

    PubMed Central

    Bryndza, Magdalena; Chrapusta, Anna; Kobielska, Ewa; Kapelak, Bogusław; Grudzień, Grzegorz

    2016-01-01

    Introduction Deep sternal wound infection (DSWI) is one of the most serious complications after cardiac surgery procedures, observed in 5% of patients. Current standard medical therapy for DSWI includes antibiotics, surgical debridement, resuturing or negative pressure wound therapy (NPWT). Unfortunately, in some cases these methods are insufficient, and additional therapeutic options are needed. Aim To assess the effects and usefulness of additional hyperbaric oxygen therapy (HBO2) in patients with DSWI after cardiac surgery procedures. Material and methods A retrospective analysis of 10 patients after cardiac surgery who developed DSWI in the period 2010–2012 was performed. After 3 months of ineffective conventional therapy including targeted antibiotic, surgical sternal debridement and NPWT, patients were qualified for additional HBO2 therapy. A total of 20 sessions of HBO2 therapy were performed, each 92 minutes long. Results After 4 weeks of HBO2 treatment, 7 patients presented complete wound healing with fibrous scar formation. One patient was qualified for the another cycle of HBO2 therapy with 20 additional sessions, and complete wound healing was observed. In 2 cases, after 5 and 19 sessions, HBO2 was interrupted because of improper qualifications. Conclusions The HBO2 as an additional therapy in DSWI was successful in 80% of cases, and no complications were observed. However, due to the small number of published studies with a small number of patients, randomized, clinical trials are needed to assess the clinical results of HBO2 in DSWI after cardiac surgery procedures. PMID:27785131

  11. Using Embryology Screencasts: A Useful Addition to the Student Learning Experience?

    ERIC Educational Resources Information Center

    Evans, Darrell J. R.

    2011-01-01

    Although podcasting has been a well used resource format in the last few years as a way of improving the student learning experience, the inclusion of enhanced audiovisual formats such as screencasts has been less used, despite the advantage that they work well for both visual and auditory learners. This study examines the use of and student…

  12. Designing Location-Based Learning Experiences for People with Intellectual Disabilities and Additional Sensory Impairments

    ERIC Educational Resources Information Center

    Brown, David J.; McHugh, David; Standen, Penny; Evett, Lindsay; Shopland, Nick; Battersby, Steven

    2011-01-01

    The research reported here is part of a larger project which seeks to combine serious games (or games-based learning) with location-based services to help people with intellectual disabilities and additional sensory impairments to develop work based skills. Specifically this paper reports on where these approaches are combined to scaffold the…

  13. English as an Additional Language and Initial Teacher Education: Views and Experiences from Northern Ireland

    ERIC Educational Resources Information Center

    Skinner, Barbara

    2010-01-01

    This paper addresses training for teaching English as an Additional Language (EAL) at initial teacher education (ITE) level in Northern Ireland. This small-scale qualitative study describes 15 primary and post-primary teachers' perspectives on their preparation for teaching EAL in Northern Ireland. It explores reflections on EAL content in ITE…

  14. Conceptualizing the aesthetic experience: using the influence matrix to show causal relationships between basic concepts in aesthetics

    NASA Astrophysics Data System (ADS)

    Domínguez-Rué, Emma; Mrotzek, Maximilian

    2014-01-01

    Previous research has shown that using tools from systems science for teaching and learning in the Humanities offers innovative insights that can prove helpful for both students and lecturers. Our contention here is that a method used in systems science, namely the influence matrix, can be a suitable tool to facilitate the understanding of elementary notions in Aesthetics by means of systematizing this process. As we will demonstrate in the upcoming sections, the influence matrix can help us to understand the nature and function of the basic elements that take part in the aesthetic experience and their evolving relevance in the history of Aesthetics. The implementation of these elements to an influence matrix will contribute to a more detailed understanding of (i) the nature of each element, (ii) the interrelation between them and (iii) the influence each element has on all the others.

  15. Laser Additive Melting and Solidification of Inconel 718: Finite Element Simulation and Experiment

    NASA Astrophysics Data System (ADS)

    Romano, John; Ladani, Leila; Sadowski, Magda

    2016-03-01

    The field of powdered metal additive manufacturing is experiencing a surge in public interest finding uses in aerospace, defense, and biomedical industries. The relative youth of the technology coupled with public interest makes the field a vibrant research topic. The authors have expanded upon previously published finite element models used to analyze the processing of novel engineering materials through the use of laser- and electron beam-based additive manufacturing. In this work, the authors present a model for simulating fabrication of Inconel 718 using laser melting processes. Thermal transport phenomena and melt pool geometries are discussed and validation against experimental findings is presented. After comparing experimental and simulation results, the authors present two correction correlations to transform the modeling results into meaningful predictions of actual laser melting melt pool geometries in Inconel 718.

  16. A simple optical index shows spatial and temporal heterogeneity in phytoplankton community composition during the 2008 North Atlantic Bloom Experiment

    NASA Astrophysics Data System (ADS)

    Cetinić, I.; Perry, M. J.; D'Asaro, E.; Briggs, N.; Poulton, N.; Sieracki, M. E.; Lee, C. M.

    2015-04-01

    The ratio of two in situ optical measurements - chlorophyll fluorescence (Chl F) and optical particulate backscattering (bbp) - varied with changes in phytoplankton community composition during the North Atlantic Bloom Experiment in the Iceland Basin in 2008. Using ship-based measurements of Chl F, bbp, chlorophyll a (Chl), high-performance liquid chromatography (HPLC) pigments, phytoplankton composition and carbon biomass, we found that oscillations in the ratio varied with changes in plankton community composition; hence we refer to Chl F/bbp as an "optical community index". The index varied by more than a factor of 2, with low values associated with pico- and nanophytoplankton and high values associated with diatom-dominated phytoplankton communities. Observed changes in the optical index were driven by taxa-specific chlorophyll-to-autotrophic carbon ratios and by physiological changes in Chl F associated with the silica limitation. A Lagrangian mixed-layer float and four Seagliders, operating continuously for 2 months, made similar measurements of the optical community index and followed the evolution and later demise of the diatom spring bloom. Temporal changes in optical community index and, by implication, the transition in community composition from diatom to post-diatom bloom communities were not simultaneous over the spatial domain surveyed by the ship, float and gliders. The ratio of simple optical properties measured from autonomous platforms, when carefully validated, provides a unique tool for studying phytoplankton patchiness on extended temporal scales and ecologically relevant spatial scales and should offer new insights into the processes regulating patchiness.

  17. The Majorana Demonstrator: Progress towards showing the feasibility of a 76Ge neutrinoless double-beta decay experiment

    SciTech Connect

    Finnerty, P.; Aguayo, Estanislao; Amman, M.; Avignone, Frank T.; Barabash, Alexander S.; Barton, P. J.; Beene, Jim; Bertrand, F.; Boswell, M.; Brudanin, V.; Busch, Matthew; Chan, Yuen-Dat; Christofferson, Cabot-Ann; Collar, J. I.; Combs, Dustin C.; Cooper, R. J.; Detwiler, Jason A.; Doe, P. J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, S. R.; Esterline, James H.; Fast, James E.; Fields, N.; Fraenkle, Florian; Galindo-Uribarri, A.; Gehman, Victor M.; Giovanetti, G. K.; Green, M.; Guiseppe, Vincente; Gusey, K.; Hallin, A. L.; Hazama, R.; Henning, Reyco; Hoppe, Eric W.; Horton, Mark; Howard, Stanley; Howe, M. A.; Johnson, R. A.; Keeter, K.; Kidd, M. F.; Knecht, A.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; LaFerriere, Brian D.; Leon, Jonathan D.; Leviner, L.; Loach, J. C.; Looker, Q.; Luke, P.; MacMullin, S.; Marino, Michael G.; Martin, R. D.; Merriman, Jason H.; Miller, M. L.; Mizouni, Leila; Nomachi, Masaharu; Orrell, John L.; Overman, Nicole R.; Perumpilly, Gopakumar; Phillips, David; Poon, Alan; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Ronquest, M. C.; Schubert, Alexis G.; Shima, T.; Shirchenko, M.; Snavely, Kyle J.; Steele, David; Strain, J.; Timkin, V.; Tornow, Werner; Varner, R. L.; Vetter, Kai; Vorren, Kris R.; Wilkerson, J. F.; Yakushev, E.; Yaver, Harold; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir

    2014-03-24

    The Majorana Demonstrator will search for the neutrinoless double-beta decay (0*) of the 76Ge isotope with a mixed array of enriched and natural germanium detectors. The observation of this rare decay would indicate the neutrino is its own anti-particle, demonstrate that lepton number is not conserved, and provide information on the absolute mass-scale of the neutrino. The Demonstrator is being assembled at the 4850 foot level of the Sanford Underground Research Facility in Lead, South Dakota. The array will be contained in a lowbackground environment and surrounded by passive and active shielding. The goals for the Demonstrator are: demonstrating a background rate less than 3 counts tonne -1 year-1 in the 4 keV region of interest (ROI) surrounding the 2039 keV 76Ge endpoint energy; establishing the technology required to build a tonne-scale germanium based double-beta decay experiment; testing the recent claim of observation of 0; and performing a direct search for lightWIMPs (3-10 GeV/c2).

  18. Experiences of clinical tutors with English as an additional language (EAL) students.

    PubMed

    Lu, Hongyan; Maithus, Caroline

    2012-11-01

    Clinical tutors, referred to in the international literature as clinical supervisors, facilitators, mentors or instructors, are responsible for providing and supervising workplace learning opportunities for groups of Bachelor of Nursing (BN) students. They also play a key role in assessing students. The role modeling and support provided by both clinical tutors and registered nurses (RN) or nurse preceptors helps students become familiar with the language in which nursing work is realised. As BN student cohorts in New Zealand have become more diverse in terms of cultures, ethnicities and language backgrounds, clinical tutors have to directly facilitate the development of context-specific and client-focused communication skills for students who speak English as an additional language. We undertook a study which looked at the perceptions of new nursing graduates with English as an additional language (EAL) on the development of spoken language skills for the clinical workplace. As well as interviewing graduates, we spoke to four clinical tutors in order to elicit their views on the language development of EAL students in previous cohorts. This article reports on the themes which emerged from the interviews with the tutors. These include goal setting for communication, integrating students into nursing work, making assessment less stressful, and endorsing independent learning strategies. Based on their observations and on other published research we make some suggestions about ways both clinical tutors and EAL students within their teaching groups could be supported in the development of communication skills for clinical practice.

  19. Experiences of clinical tutors with English as an additional language (EAL) students.

    PubMed

    Lu, Hongyan; Maithus, Caroline

    2012-11-01

    Clinical tutors, referred to in the international literature as clinical supervisors, facilitators, mentors or instructors, are responsible for providing and supervising workplace learning opportunities for groups of Bachelor of Nursing (BN) students. They also play a key role in assessing students. The role modeling and support provided by both clinical tutors and registered nurses (RN) or nurse preceptors helps students become familiar with the language in which nursing work is realised. As BN student cohorts in New Zealand have become more diverse in terms of cultures, ethnicities and language backgrounds, clinical tutors have to directly facilitate the development of context-specific and client-focused communication skills for students who speak English as an additional language. We undertook a study which looked at the perceptions of new nursing graduates with English as an additional language (EAL) on the development of spoken language skills for the clinical workplace. As well as interviewing graduates, we spoke to four clinical tutors in order to elicit their views on the language development of EAL students in previous cohorts. This article reports on the themes which emerged from the interviews with the tutors. These include goal setting for communication, integrating students into nursing work, making assessment less stressful, and endorsing independent learning strategies. Based on their observations and on other published research we make some suggestions about ways both clinical tutors and EAL students within their teaching groups could be supported in the development of communication skills for clinical practice. PMID:23421011

  20. Additive manufacture (3d printing) of plasma diagnostic components and assemblies for fusion experiments

    NASA Astrophysics Data System (ADS)

    Sieck, Paul; Woodruff, Simon; Stuber, James; Romero-Talamas, Carlos; Rivera, William; You, Setthivoine; Card, Alexander

    2015-11-01

    Additive manufacturing (or 3D printing) is now becoming sufficiently accurate with a large range of materials for use in printing sensors needed universally in fusion energy research. Decreasing production cost and significantly lowering design time of energy subsystems would realize significant cost reduction for standard diagnostics commonly obtained through research grants. There is now a well-established set of plasma diagnostics, but these expensive since they are often highly complex and require customization, sometimes pace the project. Additive manufacturing (3D printing) is developing rapidly, including open source designs. Basic components can be printed for (in some cases) less than 1/100th costs of conventional manufacturing. We have examined the impact that AM can have on plasma diagnostic cost by taking 15 separate diagnostics through an engineering design using Conventional Manufacturing (CM) techniques to determine costs of components and labor costs associated with getting the diagnostic to work as intended. With that information in hand, we set about optimizing the design to exploit the benefits of AM. Work performed under DOE Contract DE-SC0011858.

  1. CMS Pixel Telescope Addition to T-980 Bent Crystal Collimation Experiment at the Tevatron

    NASA Astrophysics Data System (ADS)

    Rivera, Ryan; Annala, Jerry; Johnson, Todd; Kwan, Simon; Lundberg, Carl; Still, Dean; Prosser, Alan; Uplegger, Lorenzo; Zagel, Jim; Zvodaya, Viktoriya

    An enhancement to the T-980 bent crystal collimation experiment at the Tevatron has been completed. The enhancement was the installation of a pixel telescope inside the vacuum-sealed beam pipe of the Tevatron. The telescope is comprised of six CMS PSI46 pixel plaquettes, arranged as three stations of horizontal and vertical planes, with the CAPTAN system for data acquisition and control. The purpose of the pixel telescope is to measure beam profiles produced by bent crystals under various conditions. The telescope electronics inside the beam pipe initially were not adequately shielded from the image current of the passing beams. A new shielding approach was devised and installed, which resolved the problem. The noise issues encountered and the mitigating techniques are presented herein, as well as some preliminary results from the telescope.

  2. CMS Pixel Telescope Addition to T-980 Bent Crystal Collimation Experiment at the Tevatron

    SciTech Connect

    Rivera, Ryan; Annala, Jerry; Johnson, Todd; Kwan, Simon; Lundberg, Carl; Still, Dean; Prosser, Alan; Uplegger, Lorenzo; Zagel, Jim; Zvodaya, Viktoriya; /Fermilab

    2011-09-14

    An enhancement to the T-980 bent crystal collimation experiment at the Tevatron has been completed. The enhancement was the installation of a pixel telescope inside the vacuum-sealed beam pipe of the Tevatron. The telescope is comprised of six CMS PSI46 pixel plaquettes, arranged as three stations of horizontal and vertical planes, with the CAPTAN system for data acquisition and control. The purpose of the pixel telescope is to measure beam profiles produced by bent crystals under various conditions. The telescope electronics inside the beam pipe initially were not adequately shielded from the image current of the passing beams. A new shielding approach was devised and installed, which resolved the problem. The noise issues encountered and the mitigating techniques are presented herein, as well as some preliminary results from the telescope.

  3. [Requirements for drug approval and additional benefits assessment: Regulatory aspects and experiences].

    PubMed

    Broich, K; Löbker, W; Schulte, A; Beinlich, P; Müller, T

    2016-04-01

    The early assessment of benefits of newly approved drugs with novel active substances or new applications, which came into force on 1 January 2011 still represents a challenge to all parties involved. This article highlights the definitions, regulatory requirements and interaction between drug marketing approval and early assessment of benefits in Germany. The constellation of an extensively harmonized European and even international drug authorization process with a predominantly national regulation of drug reimbursement situation inevitably causes friction, which could be markedly reduced through early joint advisory discussions during the planning phase for pivotal clinical trials. During the year 2015 the Federal Institute for Drugs and Medical Devices (BfArM) carried out 300 scientific advice procedures of which 34 were concerned with applications in the field of indications for the central nervous system (CNS). In comparison 98 advisory meetings were held by the Federal Joint Committee (G-BA) of which the BfArM provided advice in 12 instances and in 2 cases on CNS indications. Study design, endpoints and appropriate comparative therapies are the key issues in exchanges and discussions between the BfArM, the G‑BA and applicants. Under these aspects the BfArM and G‑BA promote an early and consistent involvement in early advice procedures regarding the prerequisites for drug approval and assessment of additional benefits.

  4. [Requirements for drug approval and additional benefits assessment: Regulatory aspects and experiences].

    PubMed

    Broich, K; Löbker, W; Schulte, A; Beinlich, P; Müller, T

    2016-04-01

    The early assessment of benefits of newly approved drugs with novel active substances or new applications, which came into force on 1 January 2011 still represents a challenge to all parties involved. This article highlights the definitions, regulatory requirements and interaction between drug marketing approval and early assessment of benefits in Germany. The constellation of an extensively harmonized European and even international drug authorization process with a predominantly national regulation of drug reimbursement situation inevitably causes friction, which could be markedly reduced through early joint advisory discussions during the planning phase for pivotal clinical trials. During the year 2015 the Federal Institute for Drugs and Medical Devices (BfArM) carried out 300 scientific advice procedures of which 34 were concerned with applications in the field of indications for the central nervous system (CNS). In comparison 98 advisory meetings were held by the Federal Joint Committee (G-BA) of which the BfArM provided advice in 12 instances and in 2 cases on CNS indications. Study design, endpoints and appropriate comparative therapies are the key issues in exchanges and discussions between the BfArM, the G‑BA and applicants. Under these aspects the BfArM and G‑BA promote an early and consistent involvement in early advice procedures regarding the prerequisites for drug approval and assessment of additional benefits. PMID:27003322

  5. Diesel engine experiments with oxygen enrichment, water addition and lower-grade fuel

    SciTech Connect

    Sekar, R.R.; Marr, W.W.; Cole, R.L.; Marciniak, T.J. ); Schaus, J.E. )

    1990-01-01

    The concept of oxygen enriched air applied to reciprocating engines is getting renewed attention in the context of the progress made in the enrichment methods and the tougher emissions regulations imposed on diesel and gasoline engines. An experimental project was completed in which a direct injection diesel engine was tested with intake oxygen levels of 21% -- 35%. Since an earlier study indicated that it is necessary to use a cheaper fuel to make the concept economically attractive, a less refined fuel was included in the test series. Since a major objection to the use of oxygen enriched combustion air had been the increase in NO{sub x} emissions, a method must be found to reduce NO{sub x}. Introduction of water into the engine combustion process was included in the tests for this purpose. Fuel emulsification with water was the means used here even though other methods could also be used. The teat data indicated a large increase in engine power density, slight improvement in thermal efficiency, significant reductions in smoke and particulate emissions and NO{sub x} emissions controllable with the addition of water. 15 refs., 10 figs., 2 tabs.

  6. Effect of Additives on Green Sand Molding Properties using Design of Experiments and Taguchi's Quality Loss Function - An Experimental Study

    NASA Astrophysics Data System (ADS)

    Desai, Bhagyashree; Mokashi, Pavani; Anand, R. L.; Burli, S. B.; Khandal, S. V.

    2016-09-01

    The experimental study aims to underseek the effect of various additives on the green sand molding properties as a particular combination of additives could yield desired sand properties. The input parameters (factors) selected were water and powder (Fly ash, Coconut shell and Tamarind) in three levels. Experiments were planned using design of experiments (DOE). On the basis of plans, experiments were conducted to understand the behavior of sand mould properties such as compression strength, shear strength, permeability number with various additives. From the experimental results it could be concluded that the factors have significant effect on the sand properties as P-value found to be less than 0.05 for all the cases studied. The optimization based on quality loss function was also performed. The study revealed that the quality loss associated with the tamarind powder was lesser compared to other additives selected for the study. The optimization based on quality loss function and the parametric analysis using ANOVA suggested that the tamarind powder of 8 gm per Kg of molding sand and moisture content of 7% yield better properties to obtain sound castings.

  7. The effect of an additional reflection in a precedence effect experiment

    PubMed Central

    Goupell, Matthew J.; Yu, Gongqiang; Litovsky, Ruth Y.

    2012-01-01

    Studies on the precedence effect typically utilize a two-source paradigm, which is not realistic relative to real world situations where multiple reflections exist. A step closer to multiple-reflection situations was studied using a three-source paradigm. Discrimination of interaural time differences (ITDs) was measured for one-, two-, and three-source stimuli, using clicks presented over headphones. The ITD was varied in either the first, second, or the third source. The inter-source intervals ranged from 0–130 ms. A perceptual weighting model was extendedto incorporate the three-source stimuli and used to interpret the data. The effect of adding a third source could mostly, but not entirely, be understood by the interaction of effects observed in the precedence effect with two sources. Specifically, for delays between 1 and 8 ms, the ITD information of prior sources was typically weighted more heavily than subsequent sources. For delays greater than 8 ms, subsequent sources were typically weighted slightly more heavily than prior sources. However, there were specific conditions that showed a more complex interaction between the sources. These findings suggest that the two-source paradigm provides a strong basis for understanding how the auditory system processes reflections in spatial hearing tasks. PMID:22501073

  8. The interplay of experience-based affective and probabilistic cues in decision making: arousal increases when experience and additional cues conflict.

    PubMed

    Glöckner, Andreas; Hochman, Guy

    2011-01-01

    In a study using behavioral and physiological measures we induced experience-based affective cues (i.e., differential anticipatory arousal) toward a risky and a safe option by letting participants repeatedly select between two decks of cards with feedback. In later test decisions we presented choice tasks between these trained and new pairs of decks. In some of the trials a low-valid probabilistic cue was provided after stimulus onset but before the decision. Although we were successful in inducing experience-based affective cues these did not influence participants' choices. In decisions without any further cues available people choose the safe and the risky option about equally often. If an additional low-valid probabilistic cue was available people followed this cue. Although experience had no effect on choices it influenced arousal. Anticipatory physiological arousal increased if the probabilistic cue and experience were conflicting. Our results are in line with recent findings indicating diminished loss aversion in experience-based decision making. They are also consistent with parallel constraint satisfaction models and shed light on the interrelation between experience, probabilistic cues, and arousal in decision making.

  9. "The Show"

    ERIC Educational Resources Information Center

    Gehring, John

    2004-01-01

    For the past 16 years, the blue-collar city of Huntington, West Virginia, has rolled out the red carpet to welcome young wrestlers and their families as old friends. They have come to town chasing the same dream for a spot in what many of them call "The Show". For three days, under the lights of an arena packed with 5,000 fans, the state's best…

  10. Additional road markings as an indication of speed limits: results of a field experiment and a driving simulator study.

    PubMed

    Daniels, Stijn; Vanrie, Jan; Dreesen, An; Brijs, Tom

    2010-05-01

    Although speed limits are indicated by road signs, road users are not always aware, while driving, of the actual speed limit on a given road segment. The Roads and Traffic Agency developed additional road markings in order to support driver decisions on speed on 70 km/h roads in Flanders-Belgium. In this paper the results are presented of two evaluation studies, both a field study and a simulator study, on the effects of the additional road markings on speed behaviour. The results of the field study showed no substantial effect of the markings on speed behaviour. Neither did the simulator study, with slightly different stimuli. Nevertheless an effect on lateral position was noticed in the simulator study, showing at least some effect of the markings. The role of conspicuity of design elements and expectations towards traffic environments is discussed. Both studies illustrate well some strengths and weaknesses of observational field studies compared to experimental simulator studies.

  11. Determination of Unknown Concentrations of Sodium Acetate Using the Method of Standard Addition and Proton NMR: An Experiment for the Undergraduate Analytical Chemistry Laboratory

    ERIC Educational Resources Information Center

    Rajabzadeh, Massy

    2012-01-01

    In this experiment, students learn how to find the unknown concentration of sodium acetate using both the graphical treatment of standard addition and the standard addition equation. In the graphical treatment of standard addition, the peak area of the methyl peak in each of the sodium acetate standard solutions is found by integration using…

  12. Field experiments of Controlled Drainage of agricultural clay soils show positive effects on water quantity (retention, runoff) and water quality (nitrate leaching).

    NASA Astrophysics Data System (ADS)

    schipper, peter; stuyt, lodewijk; straat, van der, andre; schans, van der, martin

    2014-05-01

    processes in the soil have been modelled with simulation model SWAP. The experiment started in 2010 and is ongoing. Data, collected so far show that the plots with controlled drainage (all compared with plots equipped with conventional drainage) conserve more rain water (higher groundwater tables in early spring), lower discharges under average weather conditions and storm events, reduce N-loads and saline seepage to surface waters, enhance denitrification, show a different 'first flush' effect and show similar crop yields. The results of the experiments will contribute to a better understanding of the impact of controlled drainage on complex hydrological en geochemical processes in agricultural clay soils, the interaction between ground- en surface water and its effects on drain water quantity, quality and crop yield.

  13. Changes in water, carbon, and nitrogen fluxes with the addition of biochar to soils: lessons learned from laboratory and greenhouse experiments

    NASA Astrophysics Data System (ADS)

    Barnes, R. T.; Gallagher, M. E.; Masiello, C. A.; Liu, Z.; Dugan, B.; Rudgers, J. A.

    2011-12-01

    The addition of biochar to agricultural soils has the potential to provide a number of ecosystem services, ranging from carbon (C) sequestration to increased soil fertility and crop production. It is estimated that 0.5 to 0.9 Pg of C yr-1 can be sequestered through the addition of biochar to soils, significantly increasing the charcoal flux to the biosphere over natural inputs from fire (0.05 to 0.20 Pg C yr-1). There remain large uncertainties about biochar mobility within the environment, making it a challenge to assess the ecosystem residence time of biochar. We conducted laboratory and greenhouse experiments to understand how soil amendment with laboratory-produced biochar changes water, C, and nitrogen (N) fluxes from soils. We used column experiments to assess how biochar amendment to three types of soils (sand, organic, clay-rich) affected hydraulic conductivity and dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) fluxes. Results varied with soil type; biochar significantly decreased the hydraulic conductivity of the sand and organic soils by a factor of 10.6 and 2.7, respectively. While not statistically significant, biochar addition increased the hydraulic conductivity of the clay-rich soil by 50% on average. The addition of biochar significantly increased the DOC fluxes from the C-poor sand and clay soils while it significantly decreased the DOC flux from the organic-rich soil. In contrast, TDN fluxes decreased with biochar additions from all soil types, though the results were not statistically significant from the clay-rich soil. These laboratory experiments suggest that changes in the hydraulic conductivity of soil due to biochar amendments could play a significant role in understanding how biochar additions to agricultural fields will change watershed C and N dynamics. We additionally conducted a 28-day greenhouse experiment with sorghum plants using a three-way factorial treatment (water availability x biochar x mycorrhizae) to

  14. Adaptation of the pore diffusion model to describe multi-addition batch uptake high-throughput screening experiments.

    PubMed

    Traylor, Steven J; Xu, Xuankuo; Li, Yi; Jin, Mi; Li, Zheng Jian

    2014-11-14

    Equilibrium isotherm and kinetic mass transfer measurements are critical to mechanistic modeling of binding and elution behavior within a chromatographic column. However, traditional methods of measuring these parameters are impractically time- and labor-intensive. While advances in high-throughput robotic liquid handling systems have created time and labor-saving methods of performing kinetic and equilibrium measurements of proteins on chromatographic resins in a 96-well plate format, these techniques continue to be limited by physical constraints on protein addition, incubation and separation times; the available concentration of protein stocks and process pools; and practical constraints on resin and fluid volumes in the 96-well format. In this study, a novel technique for measuring protein uptake kinetics (multi-addition batch uptake) has been developed to address some of these limitations during high-throughput batch uptake kinetic measurements. This technique uses sequential additions of protein stock to chromatographic resin in a 96-well plate and the subsequent removal of each addition by centrifugation or vacuum separation. The pore diffusion model was adapted here to model multi-addition batch uptake and was tested and compared with traditional batch uptake measurements of uptake of an Fc-fusion protein on an anion exchange resin. Acceptable agreement between the two techniques is achieved for the two solution conditions investigated here. In addition, a sensitivity analysis of the model to the physical inputs is presented and the advantages and limitations of the multi-addition batch uptake technique are explored.

  15. Examining the Influence of Additional Field-Based Experiences on Pre-Service Teachers and Their Perceived Ability to Teach

    ERIC Educational Resources Information Center

    Clark, Sarah K.

    2012-01-01

    In an attempt to analyse more closely the training experiences of pre-service teachers, the author conducted an exploratory quasi-experimental study at a university located in the Rocky Mountain region of the USA. All students who were enrolled in the same reading methods course (but enrolled in different sections) were invited to participate in…

  16. Reflections on Doctoral Supervision: Drawing from the Experiences of Students with Additional Learning Needs in Two Universities

    ERIC Educational Resources Information Center

    Collins, Bethan

    2015-01-01

    Supervision is an essential part of doctoral study, consisting of relationship and process aspects, underpinned by a range of values. To date there has been limited research specifically about disabled doctoral students' experiences of supervision. This paper draws on qualitative, narrative interviews about doctoral supervision with disabled…

  17. East Asian International Student Experiences as Learners of English as an Additional Language: Implications for School Counsellors

    ERIC Educational Resources Information Center

    Popadiuk, Natalee E.; Marshall, Steve

    2011-01-01

    In the school counselling literature, little focus is placed on international students who are learners of English as an Additional Language (EAL) and on school counselling support related to their language acquisition. Using the Critical Incident Technique, we analyzed transcripts of 21 international EAL students from China, Japan, and Korea who…

  18. The effects of the addition of a pediatric surgery fellow on the operative experience of the general surgery resident.

    PubMed

    Raines, Alexander; Garwe, Tabitha; Adeseye, Ademola; Ruiz-Elizalde, Alejandro; Churchill, Warren; Tuggle, David; Mantor, Cameron; Lees, Jason

    2015-06-01

    Adding fellows to surgical departments with residency programs can affect resident education. Our specific aim was to evaluate the effect of adding a pediatric surgery (PS) fellow on the number of index PS cases logged by the general surgery (GS) residents. At a single institution with both PS and GS programs, we examined the number of logged cases for the fellows and residents over 10 years [5 years before (Time 1) and 5 years after (Time 2) the addition of a PS fellow]. Additionally, the procedure related relative value units (RVUs) recorded by the faculty were evaluated. The fellows averaged 752 and 703 cases during Times 1 and 2, respectively, decreasing by 49 (P = 0.2303). The residents averaged 172 and 161 cases annually during Time 1 and Time 2, respectively, decreasing by 11 (P = 0.7340). The total number of procedure related RVUs was 4627 and 6000 during Times 1 and 2, respectively. The number of cases logged by the PS fellows and GS residents decreased after the addition of a PS fellow; however, the decrease was not significant. Programs can reasonably add an additional PS fellow, but care should be taken especially in programs that are otherwise static in size.

  19. Effects of biochar addition on greenhouse gas emissions and microbial responses in a short-term laboratory experiment.

    PubMed

    Yoo, Gayoung; Kang, Hojeong

    2012-01-01

    Biochar application to soil has drawn much attention as a strategy to sequester atmospheric carbon in soil ecosystems. The applicability of this strategy as a climate change mitigation option is limited by our understanding of the mechanisms responsible for the observed changes in greenhouse gas emissions from soils, microbial responses, and soil fertility changes. We conducted an 8-wk laboratory incubation using soils from PASTURE (silt loam) and RICE PADDY (silt loam) sites with and without two types of biochar (biochar from swine manure [CHAR-M] and from barley stover [CHAR-B]). Responses to addition of the different biochars varied with the soil source. Addition of CHAR-B did not change CO and CH evolution from the PASTURE or the RICE PADDY soils, but there was a decrease in NO emissions from the PASTURE soil. The effects of CHAR-M addition on greenhouse gas emissions were different for the soils. The most substantial change was an increase in NO emissions from the RICE PADDY soil. This result was attributed to a combination of abundant denitrifiers in this soil and increased net nitrogen mineralization. Soil phosphatase and N-acetylglucosaminidase activity in the CHAR-B-treated soils was enhanced compared with the controls for both soils. Fungal biomass was higher in the CHAR-B-treated RICE PADDY soil. From our results, we suggest CHAR-B to be an appropriate amendment for the PASTURE and RICE PADDY soils because it provides increased nitrogen availability and microbial activity with no net increase in greenhouse gas emissions. Application of CHAR-M to RICE PADDY soils could result in excess nitrogen availability, which may increase NO emissions and possible NO leaching problems. Thus, this study confirms that the ability of environmentally sound biochar additions to sequester carbon in soils depends on the characteristics of the receiving soil as well as the nature of the biochar.

  20. Effects of biochar addition on greenhouse gas emissions and microbial responses in a short-term laboratory experiment.

    PubMed

    Yoo, Gayoung; Kang, Hojeong

    2012-01-01

    Biochar application to soil has drawn much attention as a strategy to sequester atmospheric carbon in soil ecosystems. The applicability of this strategy as a climate change mitigation option is limited by our understanding of the mechanisms responsible for the observed changes in greenhouse gas emissions from soils, microbial responses, and soil fertility changes. We conducted an 8-wk laboratory incubation using soils from PASTURE (silt loam) and RICE PADDY (silt loam) sites with and without two types of biochar (biochar from swine manure [CHAR-M] and from barley stover [CHAR-B]). Responses to addition of the different biochars varied with the soil source. Addition of CHAR-B did not change CO and CH evolution from the PASTURE or the RICE PADDY soils, but there was a decrease in NO emissions from the PASTURE soil. The effects of CHAR-M addition on greenhouse gas emissions were different for the soils. The most substantial change was an increase in NO emissions from the RICE PADDY soil. This result was attributed to a combination of abundant denitrifiers in this soil and increased net nitrogen mineralization. Soil phosphatase and N-acetylglucosaminidase activity in the CHAR-B-treated soils was enhanced compared with the controls for both soils. Fungal biomass was higher in the CHAR-B-treated RICE PADDY soil. From our results, we suggest CHAR-B to be an appropriate amendment for the PASTURE and RICE PADDY soils because it provides increased nitrogen availability and microbial activity with no net increase in greenhouse gas emissions. Application of CHAR-M to RICE PADDY soils could result in excess nitrogen availability, which may increase NO emissions and possible NO leaching problems. Thus, this study confirms that the ability of environmentally sound biochar additions to sequester carbon in soils depends on the characteristics of the receiving soil as well as the nature of the biochar. PMID:22751062

  1. Soil microbial biomass and community structure affected by repeated additions of sewage sludge in four Swedish long-term field experiments

    NASA Astrophysics Data System (ADS)

    Börjesson, G.; Kätterer, T.; Kirchmann, H.

    2012-04-01

    Soil organic matter is a key attribute of soil fertility. The pool of soil organic C can be increased, either by mineral fertilisers or by adding organic amendments such as sewage sludge. Sewage sludge has positive effects on agricultural soils through the supply of organic matter and essential plant nutrients, but sludge may also contain unwanted heavy metals, xenobiotic substances and pathogens. One obvious effect of long-term sewage sludge addition is a decrease in soil pH, caused by N mineralisation followed by nitrification, sulphate formation and presence of organic acids with the organic matter added. The objective of this study was to investigate the effect of sewage sludge on the microbial biomass and community structure. Materials and methods We analysed soil samples from four sites where sewage sludge has been repeatedly applied in long-term field experiments situated in different parts of Sweden; Ultuna (59°49'N, 17°39'E, started 1956), Lanna (58°21'N, 13°06'E, started 1997-98), Petersborg (55°32'N, 13°00'E, started 1981) and Igelösa (55°45'N, 13°18'E, started 1981). In these four experiments, at least one sewage sludge treatment is included in the experimental design. In the Ultuna experiment, all organic fertilisers, including sewage sludge, are applied every second year, corresponding to 4 ton C ha-1. The Lanna experiment has a similar design, with 8 ton dry matter ha-1 applied every second year. Lanna also has an additional treatment in which metal salts (Cd, Cu, Ni and Zn) are added together with sewage sludge. At Petersborg and Igelösa, two levels of sewage sludge (4 or 12 ton dry matter ha-1 every 4th year) are compared with three levels of NPK fertiliser (0 N, ½ normal N and normal N). Topsoil samples (0-20 cm depth) from the four sites were analysed for total C, total N, pH and PLFAs (phospholipid fatty acids). In addition, crop yields were recorded. Results At all four sites, sewage sludge has had a positive effect on crop yields

  2. Karst show caves - how DTN technology as used in space assists automatic environmental monitoring and tourist protection - experiment in Postojna Cave

    NASA Astrophysics Data System (ADS)

    Gabrovšek, F.; Grašič, B.; Božnar, M. Z.; Mlakar, P.; Udén, M.; Davies, E.

    2014-02-01

    The paper presents an experiment demonstrating a novel and successful application of delay- and disruption-tolerant networking (DTN) technology for automatic data transfer in a karst cave early warning and measuring system. The experiment took place inside the Postojna Cave in Slovenia, which is open to tourists. Several automatic meteorological measuring stations are set up inside the cave, as an adjunct to the surveillance infrastructure; the regular data transfer provided by the DTN technology allows the surveillance system to take on the role of an early warning system (EWS). One of the stations is set up alongside the railway tracks, which allows the tourist to travel inside the cave by train. The experiment was carried out by placing a DTN "data mule" (a DTN-enabled computer with WiFi connection) on the train and by upgrading the meteorological station with a DTN-enabled WiFi transmission system. When the data mule is in the wireless drive-by mode, it collects measurement data from the station over a period of several seconds as the train without stopping passes the stationary equipment, and delivers data at the final train station by the cave entrance. This paper describes an overview of the experimental equipment and organization allowing the use of a DTN system for data collection and an EWS inside karst caves where there is regular traffic of tourists and researchers.

  3. Karst show caves - how DTN technology as used in space assists automatic environmental monitoring and tourist protection - experiment in Postojna cave

    NASA Astrophysics Data System (ADS)

    Gabrovšek, F.; Grašič, B.; Božnar, M. Z.; Mlakar, P.; Udén, M.; Davies, E.

    2013-10-01

    The paper presents an experiment demonstrating a novel and successful application of Delay- and Disruption-Tolerant Networking (DTN) technology for automatic data transfer in a karst cave Early Warning and Measuring System. The experiment took place inside the Postojna Cave in Slovenia, which is open to tourists. Several automatic meteorological measuring stations are set up inside the cave, as an adjunct to the surveillance infrastructure; the regular data transfer provided by the DTN technology allows the surveillance system to take on the role of an Early Warning System (EWS). One of the stations is set up alongside the railway tracks, which allows the tourist to travel inside the cave by train. The experiment was carried out by placing a DTN "data mule" (a DTN-enabled computer with WiFi connection) on the train and by upgrading the meteorological station with a DTN-enabled WiFi transmission system. When the data mule is in the wireless drive-by mode, it collects measurement data from the station over a period of several seconds as the train passes the stationary equipment, and delivers data at the final train station by the cave entrance. This paper describes an overview of the experimental equipment and organisation allowing the use of a DTN system for data collection and an EWS inside karst caves where there is a regular traffic of tourists and researchers.

  4. Honored Teacher Shows Commitment.

    ERIC Educational Resources Information Center

    Ratte, Kathy

    1987-01-01

    Part of the acceptance speech of the 1985 National Council for the Social Studies Teacher of the Year, this article describes the censorship experience of this honored social studies teacher. The incident involved the showing of a videotape version of the feature film entitled "The Seduction of Joe Tynan." (JDH)

  5. Forestry Impacts on Mercury Mobility, Methylation, and Bioaccumulation - A Field Experiment with Enriched Stable Mercury Isotope Additions

    NASA Astrophysics Data System (ADS)

    Mitchell, Carl; Haynes, Kristine; Mazur, Maxwell; Fidler, Nathan; Eckley, Chris; Kolka, Randy; Eggert, Susan; Sebestyen, Stephen

    2013-04-01

    Forest harvesting has clear impacts on terrestrial hydrology at least over the short term. Similar biogeochemical impacts, such as augmented mercury fluxes or downstream impacts on ecosystems are not as clear, and recent studies have not demonstrated consistent or predictable impacts across systems. To gain a better process understanding of mercury cycling in upland forest-lowland peatland ecosystems, we undertook a field-scale experiment at a study site in northern Minnesota (USA) where shallow subsurface hillslope runoff flows into an adjacent peatland ecosystem. Starting in 2009, three upland forest plots (< 1 hectare each) were delineated and hydrometric infrastructure such as runoff trenches, snow lysimeters, soil moisture probes, shallow piezometers, and throughfall gauges were installed in each plot. We added 14.2 to 16.7 μg/m2 of enriched mercury-200 and mercury-204 (as dilute mercuric nitrate) in the spring of 2011 and 2012, respectively, to distinguish between contemporary and legacy mercury and to provide some insight into the duration of contemporary mercury mobility in impacted terrestrial ecosystems. During the late winter of 2012, one of the study plots was clearcut and approximately 80% of slash was removed. We clearcut a second plot without slash removal, and left the third plot as a control. Throughout the study, we have monitored (including isotopes): mercury in runoff, soil-air gaseous Hg fluxes, methylation potentials in the adjacent peatland, and bioaccumulation into invertebrates inhabiting the adjacent peatland. Early results mostly indicate that slash removal actually lessens the impacts of clearcutting on mercury mobility (although forest harvesting in general does have a significant impact) and that forestry operations at this scale have little to no impact on methylation or bioaccumulation in downstream peatlands. Thus far, the greatest impact of slash removal in forest harvested systems is an increase in mercury evasion, likely as a

  6. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment.

    PubMed

    Taniguchi, Naoya; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Sasaki, Kiyoyuki; Otsuki, Bungo; Nakamura, Takashi; Matsushita, Tomiharu; Kokubo, Tadashi; Matsuda, Shuichi

    2016-02-01

    Selective laser melting (SLM) is an additive manufacturing technique with the ability to produce metallic scaffolds with accurately controlled pore size, porosity, and interconnectivity for orthopedic applications. However, the optimal pore structure of porous titanium manufactured by SLM remains unclear. In this study, we evaluated the effect of pore size with constant porosity on in vivo bone ingrowth in rabbits into porous titanium implants manufactured by SLM. Three porous titanium implants (with an intended porosity of 65% and pore sizes of 300, 600, and 900μm, designated the P300, P600, and P900 implants, respectively) were manufactured by SLM. A diamond lattice was adapted as the basic structure. Their porous structures were evaluated and verified using microfocus X-ray computed tomography. Their bone-implant fixation ability was evaluated by their implantation as porous-surfaced titanium plates into the cortical bone of the rabbit tibia. Bone ingrowth was evaluated by their implantation as cylindrical porous titanium implants into the cancellous bone of the rabbit femur for 2, 4, and 8weeks. The average pore sizes of the P300, P600, and P900 implants were 309, 632, and 956μm, respectively. The P600 implant demonstrated a significantly higher fixation ability at 2weeks than the other implants. After 4weeks, all models had sufficiently high fixation ability in a detaching test. Bone ingrowth into the P300 implant was lower than into the other implants at 4weeks. Because of its appropriate mechanical strength, high fixation ability, and rapid bone ingrowth, our results indicate that the pore structure of the P600 implant is a suitable porous structure for orthopedic implants manufactured by SLM. PMID:26652423

  7. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment.

    PubMed

    Taniguchi, Naoya; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Sasaki, Kiyoyuki; Otsuki, Bungo; Nakamura, Takashi; Matsushita, Tomiharu; Kokubo, Tadashi; Matsuda, Shuichi

    2016-02-01

    Selective laser melting (SLM) is an additive manufacturing technique with the ability to produce metallic scaffolds with accurately controlled pore size, porosity, and interconnectivity for orthopedic applications. However, the optimal pore structure of porous titanium manufactured by SLM remains unclear. In this study, we evaluated the effect of pore size with constant porosity on in vivo bone ingrowth in rabbits into porous titanium implants manufactured by SLM. Three porous titanium implants (with an intended porosity of 65% and pore sizes of 300, 600, and 900μm, designated the P300, P600, and P900 implants, respectively) were manufactured by SLM. A diamond lattice was adapted as the basic structure. Their porous structures were evaluated and verified using microfocus X-ray computed tomography. Their bone-implant fixation ability was evaluated by their implantation as porous-surfaced titanium plates into the cortical bone of the rabbit tibia. Bone ingrowth was evaluated by their implantation as cylindrical porous titanium implants into the cancellous bone of the rabbit femur for 2, 4, and 8weeks. The average pore sizes of the P300, P600, and P900 implants were 309, 632, and 956μm, respectively. The P600 implant demonstrated a significantly higher fixation ability at 2weeks than the other implants. After 4weeks, all models had sufficiently high fixation ability in a detaching test. Bone ingrowth into the P300 implant was lower than into the other implants at 4weeks. Because of its appropriate mechanical strength, high fixation ability, and rapid bone ingrowth, our results indicate that the pore structure of the P600 implant is a suitable porous structure for orthopedic implants manufactured by SLM.

  8. Neutron-Rich {sup 62,64,64}Fe Show Enhanced Collectivity: The Washout of N = 40 in Terms of Experiment, Valence Proton Symmetry and Shell Model

    SciTech Connect

    Rother, W.; Dewald, A.; Fransen, C.; Hackstein, M.; Jolie, J.; Pissulla, Th.; Zel, K.-O.; Iwasaki, H.; Baugher, T.; Brown, B. A.; Gade, A.; Glasmacher, T.; McDaniel, S.; Ratkiewicz, A.; Voss, P.; Walsh, K. A.; Lenzi, S. M.; Ur, C. A.; Starosta, K.; Bazin, D.

    2011-10-28

    Probing shell structure at a large neutron excess has been of particular interest in recent times. Neutron-rich nuclei between the proton shell closures Z = 20 and Z = 28 offer an exotic testing ground for shell evolution. The development of the N = 40gap between neutron fp and lg{sub 9/2} shells gives rise to highly interesting variations of collectivity for nuclei in this region. While {sup 68}Ni shows doubly magic properties in level energies and transition strengths, this was not observed in neighbouring nuclei. Especially neutron-rich Fe isotopes proved particularly resistant to calculational approaches using the canonical valence space (fpg) resulting in important deviations of the predicted collectivity. Only an inclusion of the d{sub 5/2}-orbital could solve the problem [1]. Hitherto no transition strengths for {sup 66}Fe have been reported. We determined B(E2,2{sup +}{sub 1}{yields}0{sup +}{sub 1}) values from lifetimes measured with the recoil distance Doppler-shift method using the Cologne plunger for radioactive beams at National Superconducting Cyclotron Laboratory at Michigan State University. Excited states were populated by projectile Coulomb excitation for {sup 62,64,66}Fe. The data show a rise in collectivity for Fe isotopes towards N = 40. Results [2] are interpreted by means of a modified version of the Valence Proton Symmetry [3] and compared to shell model calculations using a new effective interaction recently developed for the fpgd valence space [4].

  9. Effect of volcano ash additions on nutrient concentrations, bloom dynamics and community metabolism in a short-term experiment in the NW Mediterranean Sea

    NASA Astrophysics Data System (ADS)

    Weinbauer, Markus

    2016-04-01

    Volcano ash deposition is now considered as an important source of inorganic bioavailable iron which can relieve Fe-limitation in the ocean. As volcano ash also releases PO4, a experiment was performed in the NW Mediterranean Sea to test whether volcano ash deposition can affect nutrient dynamics and bloom development in a P-limited system. In a 54h experiment, it was shown that the development of a phytoplankton bloom was not enhanced or even repressed by ash additions of 2 and 20 mg l-1, whereas higher ash concentrations (200 mg l-1) induced a phytoplankton bloom as indicated by elevated Chlorophyll-a levels. Concurrently, net community production (NCP) and gross primary production (GPP) were enhanced at T24h at the highest ash additions. The metabolic balance was roughly neutral at low or no ash additions, but shifted towards phototrophy at the highest ash additions. The data on inorganic nutrient development and release estimates from ash material assays suggest relieving of P-limitation concomitant with NO3 and silicate use from ash. The concentration of TEP increased with increasing ash levels. The abundances of the heterotrophic compartment (bacteria, viruses and ciliates) also indicated dose-dependent responses. Our data suggest that heterotrophs won the competition for inorganic nutrients at ash levels of 2 and 20 mg l-1, whereas phytoplankton won at levels of 200 mg l-1. Overall, our experiments point to a strong potential of volcano ash deposition as forcing factor for nutrient dynamics and the activity of microbial plankton in a P-limited system.

  10. Kinetics of the addition of olefins to Si-centered radicals: the critical role of dispersion interactions revealed by theory and experiment.

    PubMed

    Johnson, Erin R; Clarkin, Owen J; Dale, Stephen G; DiLabio, Gino A

    2015-06-01

    Solution-phase rate constants for the addition of selected olefins to the triethylsilyl and tris(trimethylsilyl)silyl radicals are measured using laser-flash photolysis and competition kinetics. The results are compared with predictions from density functional theory (DFT) calculations, both with and without dispersion corrections obtained from the exchange-hole dipole moment (XDM) model. Without a dispersion correction, the rate constants are consistently underestimated; the errors increase with system size, up to 10(6) s(-1) for the largest system considered. Dispersion interactions preferentially stabilize the transition states relative to the separated reactants and bring the DFT-calculated rate constants into excellent agreement with experiment. Thus, dispersion interactions are found to play a key role in determining the kinetics for addition reactions, particularly those involving sterically bulky functional groups.

  11. Response of aboveground biomass and diversity to nitrogen addition – a five-year experiment in semi-arid grassland of Inner Mongolia, China

    NASA Astrophysics Data System (ADS)

    He, Kejian; Qi, Yu; Huang, Yongmei; Chen, Huiying; Sheng, Zhilu; Xu, Xia; Duan, Lei

    2016-08-01

    Understanding the response of the plant community to increasing nitrogen (N) deposition is helpful for improving pasture management in semi-arid areas. We implemented a 5-year N addition experiment in a Stipa krylovii steppe of Inner Mongolia, northern China. The aboveground biomass (AGB) and species richness were measured annually. Along with the N addition levels, the species richness declined significantly, and the species composition changed noticeably. However, the total AGB did not exhibit a noticeable increase. We found that compensatory effects of the AGB occurred not only between the grasses and the forbs but also among Gramineae species. The plant responses to N addition, from the community to species level, lessened in dry years compared to wet or normal years. The N addition intensified the reduction of community productivity in dry years. Our study indicated that the compensatory effects of the AGB among the species sustained the stability of grassland productivity. However, biodiversity loss resulting from increasing N deposition might lead the semi-arid grassland ecosystem to be unsustainable, especially in dry years.

  12. Response of aboveground biomass and diversity to nitrogen addition - a five-year experiment in semi-arid grassland of Inner Mongolia, China.

    PubMed

    He, Kejian; Qi, Yu; Huang, Yongmei; Chen, Huiying; Sheng, Zhilu; Xu, Xia; Duan, Lei

    2016-01-01

    Understanding the response of the plant community to increasing nitrogen (N) deposition is helpful for improving pasture management in semi-arid areas. We implemented a 5-year N addition experiment in a Stipa krylovii steppe of Inner Mongolia, northern China. The aboveground biomass (AGB) and species richness were measured annually. Along with the N addition levels, the species richness declined significantly, and the species composition changed noticeably. However, the total AGB did not exhibit a noticeable increase. We found that compensatory effects of the AGB occurred not only between the grasses and the forbs but also among Gramineae species. The plant responses to N addition, from the community to species level, lessened in dry years compared to wet or normal years. The N addition intensified the reduction of community productivity in dry years. Our study indicated that the compensatory effects of the AGB among the species sustained the stability of grassland productivity. However, biodiversity loss resulting from increasing N deposition might lead the semi-arid grassland ecosystem to be unsustainable, especially in dry years. PMID:27573360

  13. Response of aboveground biomass and diversity to nitrogen addition – a five-year experiment in semi-arid grassland of Inner Mongolia, China

    PubMed Central

    He, Kejian; Qi, Yu; Huang, Yongmei; Chen, Huiying; Sheng, Zhilu; Xu, Xia; Duan, Lei

    2016-01-01

    Understanding the response of the plant community to increasing nitrogen (N) deposition is helpful for improving pasture management in semi-arid areas. We implemented a 5-year N addition experiment in a Stipa krylovii steppe of Inner Mongolia, northern China. The aboveground biomass (AGB) and species richness were measured annually. Along with the N addition levels, the species richness declined significantly, and the species composition changed noticeably. However, the total AGB did not exhibit a noticeable increase. We found that compensatory effects of the AGB occurred not only between the grasses and the forbs but also among Gramineae species. The plant responses to N addition, from the community to species level, lessened in dry years compared to wet or normal years. The N addition intensified the reduction of community productivity in dry years. Our study indicated that the compensatory effects of the AGB among the species sustained the stability of grassland productivity. However, biodiversity loss resulting from increasing N deposition might lead the semi-arid grassland ecosystem to be unsustainable, especially in dry years. PMID:27573360

  14. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show. PMID:23631336

  15. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show.

  16. Micron-Size Zero-Valent Iron Emplacement in Porous Media Using Polymer Additives: Column and Flow Cell Ex-periments

    SciTech Connect

    Oostrom, Mart; Wietsma, Thomas W.; Covert, Matthew A.; Vermeul, Vince R.

    2006-03-20

    At the Hanford Site, an extensive In Situ Redox Manipulation (ISRM) permeable reactive barrier was installed to prevent chromate from reaching the Columbia River. However, chromium has been detected in several wells, indicating a premature loss of the reductive capacity in the aquifer. Laboratory experiments have been conducted to investigate whether barrier reductive capacity can be enhanced by adding micron-scale zero-valent iron to the high-permeability zones within the aquifer using shear-thinning fluids containing polymers. Porous media were packed in a wedge-shaped flow cell to create either a heterogeneous layered system with a high-permeability zone between two low-permeability zones or a high-permeability channel sur-rounded by low-permeability materials. The injection flow rate, polymer type, polymer concentration, and injected pore volumes were determined based on preliminary short- and long-column experiments. The flow cell experiments indicated that iron concentration enhancements of at least 0.6% (w/w) could be obtained using moderate flow rates and injection of 30 pore volumes. The 0.6% amended Fe0 concentration would provide approximately 20 times the average reductive capacity that is provided by the dithionite-reduced iron in the ISRM barrier. Calculations show that a 1-m-long Fe0 amended zone with an average concentration of 0.6% w/w iron subject to a groundwater velocity of 1 m/day will have an estimated longevity of 7.2 years.

  17. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  18. The Role of Patients’ Age on Their Preferences for Choosing Additional Blood Pressure-Lowering Drugs: A Discrete Choice Experiment in Patients with Diabetes

    PubMed Central

    de Vries, Sieta T.; de Vries, Folgerdiena M.; Dekker, Thijs; Haaijer-Ruskamp, Flora M.; de Zeeuw, Dick; Ranchor, Adelita V.; Denig, Petra

    2015-01-01

    Objectives To assess whether patients’ willingness to add a blood pressure-lowering drug and the importance they attach to specific treatment characteristics differ among age groups in patients with type 2 diabetes. Materials and Methods Patients being prescribed at least an oral glucose-lowering and a blood pressure-lowering drug completed a questionnaire including a discrete choice experiment. This experiment contained choice sets with hypothetical blood pressure-lowering drugs and a no additional drug alternative, which differed in their characteristics (i.e. effects and intake moments). Differences in willingness to add a drug were compared between patients <75 years (non-aged) and ≥75 years (aged) using Pearson χ2-tests. Multinomial logit models were used to assess and compare the importance attached to the characteristics. Results Of the 161 patients who completed the questionnaire, 151 (72%) could be included in the analyses (mean age 68 years; 42% female). Aged patients were less willing to add a drug than non-aged patients (67% versus 84% respectively; P = 0.017). In both age groups, the effect on blood pressure was most important for choosing a drug, followed by the risk of adverse drug events and the risk of death. The effect on limitations due to stroke was only significant in the non-aged group. The effect on blood pressure was slightly more important in the non-aged than the aged group (P = 0.043). Conclusions Aged patients appear less willing to add a preventive drug than non-aged patients. The importance attached to various treatment characteristics does not seem to differ much among age groups. PMID:26445349

  19. Spatio-Temporal Variation in Contrasting Effects of Resident Vegetation on Establishment, Growth and Reproduction of Dry Grassland Plants: Implications for Seed Addition Experiments

    PubMed Central

    Knappová, Jana; Knapp, Michal; Münzbergová, Zuzana

    2013-01-01

    Successful establishment of plants is limited by both biotic and abiotic conditions and their interactions. Seedling establishment is also used as a direct measure of habitat suitability, but transient changes in vegetation might provide windows of opportunity allowing plant species to colonize sites which otherwise appear unsuitable. We aimed to study spatio-temporal variability in the effects of resident vegetation on establishment, growth and reproduction of dry grassland species in abandoned arable fields representing potentially suitable habitats. Seeds were sown in disturbed (bare of vegetation and roots) and undisturbed plots in three fields abandoned in the last 20 years. To assess the effects of temporal variation on plant establishment, we initiated our experiments in two years (2007 and 2008). Seventeen out of the 35 sown species flowered within two years after sowing, while three species completely failed to become established. The vegetation in the undisturbed plots facilitated seedling establishment only in the year with low spring precipitation, and the effect did not hold for all species. In contrast, growth and flowering rate were consistently much greater in the disturbed plots, but the effect size differed between the fields and years of sowing. We show that colonization is more successful when site opening by disturbance coincide with other suitable conditions such as weather or soil characteristics. Seasonal variability involved in our study emphasizes the necessity of temporal replication of sowing experiments. Studies assessing habitat suitability by seed sowing should either involve both vegetation removal treatments and untreated plots or follow the gradient of vegetation cover. We strongly recommend following the numbers of established individuals, their sizes and reproductive success when assessing habitat suitability by seed sowing since one can gain completely different results in different phases of plant life cycle. PMID:23755288

  20. Spatio-temporal variation in contrasting effects of resident vegetation on establishment, growth and reproduction of dry grassland plants: implications for seed addition experiments.

    PubMed

    Knappová, Jana; Knapp, Michal; Münzbergová, Zuzana

    2013-01-01

    Successful establishment of plants is limited by both biotic and abiotic conditions and their interactions. Seedling establishment is also used as a direct measure of habitat suitability, but transient changes in vegetation might provide windows of opportunity allowing plant species to colonize sites which otherwise appear unsuitable. We aimed to study spatio-temporal variability in the effects of resident vegetation on establishment, growth and reproduction of dry grassland species in abandoned arable fields representing potentially suitable habitats. Seeds were sown in disturbed (bare of vegetation and roots) and undisturbed plots in three fields abandoned in the last 20 years. To assess the effects of temporal variation on plant establishment, we initiated our experiments in two years (2007 and 2008). Seventeen out of the 35 sown species flowered within two years after sowing, while three species completely failed to become established. The vegetation in the undisturbed plots facilitated seedling establishment only in the year with low spring precipitation, and the effect did not hold for all species. In contrast, growth and flowering rate were consistently much greater in the disturbed plots, but the effect size differed between the fields and years of sowing. We show that colonization is more successful when site opening by disturbance coincide with other suitable conditions such as weather or soil characteristics. Seasonal variability involved in our study emphasizes the necessity of temporal replication of sowing experiments. Studies assessing habitat suitability by seed sowing should either involve both vegetation removal treatments and untreated plots or follow the gradient of vegetation cover. We strongly recommend following the numbers of established individuals, their sizes and reproductive success when assessing habitat suitability by seed sowing since one can gain completely different results in different phases of plant life cycle.

  1. Addition of trim coils to the Tandem Mirror Experiment Upgrade (TMX-U) magnet system to improve the magnetic field mapping

    SciTech Connect

    Wong, R.L.; Pedrotti, L.R.; Baldwin, D.E.; Hibbs, S.M.; Hill, D.N.; Hornady, R.H.; Jackson, M.C.

    1985-11-14

    The mapping of the magnetic flux bundle from the center cell to the Plasma Potential Control plates (PPC) on the end fan of the Tandem Mirror Experiment Upgrade (TMX-U), was improved by the addition of trim coils (12,000 amp-turns) on each side of each end fan next to the pump beam magnetic shields. The coils' axes are oriented perpendicular to the machine centerline. These coils made the necessary corrections to the field-line mapping, while keeping the field in the nearby pump beam magnetic shield below the saturation threshold. This paper briefly describes the problem, discusses the design as it evolved, and presents the results of the field testing. The disturbance to the field mapping and the appropriate corrections were determined using the code GFUN (a three dimensional electromagnetic field analysis code that includes the presence of permeable materials). The racetrack-shaped coils have dimensions of 1.5 feet by 3 feet and are powered by a renovated 600 kW Bart-Messing power supply controlled by the machine's magnet control system. The magnets were fabricated from polyimide-coated magnet wire. They are rated to 200/sup 0/C, although in pulsed operation they rise only a few degrees centigrade. The coils are placed outside of the vacuum system, and thus are considerably simpler than the other machine magnets. The restraints are designed to withstand a force of 1000 pounds per coil and a turning moment of 1000 foot pounds. The calculated field strengths were verified on the machine by inserting a Hall probe along the axis. The perturbations to the neutral beam magnetic shields were also measured. A brief description of the improvement in the machine performance is also included.

  2. [Experience of medical backup of military parade on Red Square. Authors showed data about medical backup of military personnel taking part in the parade on Red Square dedicating to anniversary of victory in the Great Patriotic War].

    PubMed

    Malykh, A B; Iakovlev, S V; Valevskiĭ, V V

    2014-03-01

    Authors showed data about medical backup of military personnel taking part in the parade on Red Square dedicating to anniversary of Victory in the Great Patriotic War. Experience of running such events allowed to work out an algorithm for medical service: preparatory stage, training stage, running of parade, stage of move out to permanent base. During the parade on Red Square for medical care asked 18 people (participants of parade and civilians). Authors came to conclusion that as a result of medical backup of military personnel taking part in the parade no infectious and group diseases were registered.

  3. Television Quiz Show Simulation

    ERIC Educational Resources Information Center

    Hill, Jonnie Lynn

    2007-01-01

    This article explores the simulation of four television quiz shows for students in China studying English as a foreign language (EFL). It discusses the adaptation and implementation of television quiz shows and how the students reacted to them.

  4. Seismic Absorption and Modulus Measurements in Porous Rocks in Lab and Field: Physical, Chemical, and Biological Effects of Fluids (Detecting a Biosurfactant Additive in a Field Irrigation Experiment)

    SciTech Connect

    Spetzler, Hartmut

    2006-05-01

    We have been exploring a new technology that is based on using low-frequency seismic attenuation data to monitor changes in fluid saturation conditions in two-fluid phase porous materials. The seismic attenuation mechanism is related to the loss of energy due to the hysteresis of resistance to meniscus movement (changes in surface tension, wettability) when a pore containing two fluids is stressed at very low frequencies (< 10 Hz). This technology has potential applications to monitoring changes in (1) leakage at buried waste sites, (2) contaminant remediation, and (3) flooding during enhanced petroleum recovery. We have concluded a three year field study at the Maricopa Agricultural Center site of the University of Arizona. Three sets of instruments were installed along an East-West line perpendicular to the 50m by 50m inigation site. Each set of instruments consisted of one three component seismometer and one tiltmeter. Microseisms and solid Earth-tides served as strain sources. The former have a power peak at a period of about 6 seconds and the tides have about two cycles per day. Installation of instruments commenced in late summer of 2002. The instruments operated nearly continuously until April 2005. During the fall of 2003 the site was irrigated with water and one year later with water containing 150 ppm of a biosurfactant additive. This biodegradable additive served to mimic a class of contaminants that change the surface tension of the inigation fluid. Tilt data clearly show tidal tilts superimposed on local tilts due to agricultural irrigation and field work. When the observed signals were correlated with site specific theoretical tilt signals we saw no anomalies for the water irrigation in 2003, but large anomalies on two stations for the surfactant irrigation in 2004. Occasional failures of seismometers as well as data acquisition systems contributed to less than continuous coverage. These data are noisier than the tilt data, but do also show possible

  5. Show Me Your Badge

    ERIC Educational Resources Information Center

    Watters, Audrey

    2012-01-01

    As changing student demographics make it harder for today's learners to earn a four-year degree, educators are experimenting with smaller credentialing steps, such as digital badges. Mark Milliron, chancellor of Western Governors University Texas, advocates the creation of a "family of credentials," ranging from digital badges to certifications,…

  6. The Great Cometary Show

    NASA Astrophysics Data System (ADS)

    2007-01-01

    its high spatial and spectral resolution, it was possible to zoom into the very heart of this very massive star. In this innermost region, the observations are dominated by the extremely dense stellar wind that totally obscures the underlying central star. The AMBER observations show that this dense stellar wind is not spherically symmetric, but exhibits a clearly elongated structure. Overall, the AMBER observations confirm that the extremely high mass loss of Eta Carinae's massive central star is non-spherical and much stronger along the poles than in the equatorial plane. This is in agreement with theoretical models that predict such an enhanced polar mass-loss in the case of rapidly rotating stars. ESO PR Photo 06c/07 ESO PR Photo 06c/07 RS Ophiuchi in Outburst Several papers from this special feature focus on the later stages in a star's life. One looks at the binary system Gamma 2 Velorum, which contains the closest example of a star known as a Wolf-Rayet. A single AMBER observation allowed the astronomers to separate the spectra of the two components, offering new insights in the modeling of Wolf-Rayet stars, but made it also possible to measure the separation between the two stars. This led to a new determination of the distance of the system, showing that previous estimates were incorrect. The observations also revealed information on the region where the winds from the two stars collide. The famous binary system RS Ophiuchi, an example of a recurrent nova, was observed just 5 days after it was discovered to be in outburst on 12 February 2006, an event that has been expected for 21 years. AMBER was able to detect the extension of the expanding nova emission. These observations show a complex geometry and kinematics, far from the simple interpretation of a spherical fireball in extension. AMBER has detected a high velocity jet probably perpendicular to the orbital plane of the binary system, and allowed a precise and careful study of the wind and the shockwave

  7. [Autoimmune processes after long-term low-level exposure to electromagnetic fields (the results of an experiment). Part 1. Mobile communications and changes in electromagnetic conditions for the population. Needs for additional substantiation of the existing hygienic standards].

    PubMed

    Grigor'ev, Iu G; Grigor'ev, O A; Ivanov, A A; Liaginskaia, A M; Merkulov, A V; Stepanov, V S; Shagina, N B

    2010-01-01

    Mobile communications provides a new source of electromagnetic exposure for almost the whole population of the Russian Federation. For the first time in the history of civilization the brain of mobile phone users was exposed to localized radiofrequency (RF) electromagnetic fields (EMF). Population exposure from the base stations is also considered to be specific. However, existing standards for limiting the exposure do not account for this special EMF source and may not ensure the absence of health effects. There was a need for reliable information that would extend databases used for development of new standards. As recommended by the World Health Organization an additional experiment was performed under the supervision of foreign experts, which showed changes in autoimmune status in rats after long-term low-level RF EMF exposure with an incident power density of 500 microW/cm2.

  8. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  9. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  10. A Holographic Road Show.

    ERIC Educational Resources Information Center

    Kirkpatrick, Larry D.; Rugheimer, Mac

    1979-01-01

    Describes the viewing sessions and the holograms of a holographic road show. The traveling exhibits, believed to stimulate interest in physics, include a wide variety of holograms and demonstrate several physical principles. (GA)

  11. The Ozone Show.

    ERIC Educational Resources Information Center

    Mathieu, Aaron

    2000-01-01

    Uses a talk show activity for a final assessment tool for students to debate about the ozone hole. Students are assessed on five areas: (1) cooperative learning; (2) the written component; (3) content; (4) self-evaluation; and (5) peer evaluation. (SAH)

  12. Show What You Know

    ERIC Educational Resources Information Center

    Eccleston, Jeff

    2007-01-01

    Big things come in small packages. This saying came to the mind of the author after he created a simple math review activity for his fourth grade students. Though simple, it has proven to be extremely advantageous in reinforcing math concepts. He uses this activity, which he calls "Show What You Know," often. This activity provides the perfect…

  13. Showing What They Know

    ERIC Educational Resources Information Center

    Cech, Scott J.

    2008-01-01

    Having students show their skills in three dimensions, known as performance-based assessment, dates back at least to Socrates. Individual schools such as Barrington High School--located just outside of Providence--have been requiring students to actively demonstrate their knowledge for years. The Rhode Island's high school graduating class became…

  14. Stage a Water Show

    ERIC Educational Resources Information Center

    Frasier, Debra

    2008-01-01

    In the author's book titled "The Incredible Water Show," the characters from "Miss Alaineus: A Vocabulary Disaster" used an ocean of information to stage an inventive performance about the water cycle. In this article, the author relates how she turned the story into hands-on science teaching for real-life fifth-grade students. The author also…

  15. What Do Maps Show?

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    This curriculum packet, appropriate for grades 4-8, features a teaching poster which shows different types of maps (different views of Salt Lake City, Utah), as well as three reproducible maps and reproducible activity sheets which complement the maps. The poster provides teacher background, including step-by-step lesson plans for four geography…

  16. Obesity in show cats.

    PubMed

    Corbee, R J

    2014-12-01

    Obesity is an important disease with a high prevalence in cats. Because obesity is related to several other diseases, it is important to identify the population at risk. Several risk factors for obesity have been described in the literature. A higher incidence of obesity in certain cat breeds has been suggested. The aim of this study was to determine whether obesity occurs more often in certain breeds. The second aim was to relate the increased prevalence of obesity in certain breeds to the official standards of that breed. To this end, 268 cats of 22 different breeds investigated by determining their body condition score (BCS) on a nine-point scale by inspection and palpation, at two different cat shows. Overall, 45.5% of the show cats had a BCS > 5, and 4.5% of the show cats had a BCS > 7. There were significant differences between breeds, which could be related to the breed standards. Most overweight and obese cats were in the neutered group. It warrants firm discussions with breeders and cat show judges to come to different interpretations of the standards in order to prevent overweight conditions in certain breeds from being the standard of beauty. Neutering predisposes for obesity and requires early nutritional intervention to prevent obese conditions. PMID:24612018

  17. Show Me the Way

    ERIC Educational Resources Information Center

    Dicks, Matthew J.

    2005-01-01

    Because today's students have grown up steeped in video games and the Internet, most of them expect feedback, and usually gratification, very soon after they expend effort on a task. Teachers can get quick feedback to students by showing them videotapes of their learning performances. The author, a 3rd grade teacher describes how the seemingly…

  18. The Art Show

    ERIC Educational Resources Information Center

    Scolarici, Alicia

    2004-01-01

    This article describes what once was thought to be impossible--a formal art show extravaganza at an elementary school with 1,000 students, a Department of Defense Dependent School (DODDS) located overseas, on RAF Lakenheath, England. The dream of this this event involved the transformation of the school cafeteria into an elegant art show…

  19. Taking in a Show.

    PubMed

    Boden, Timothy W

    2016-01-01

    Many medical practices have cut back on education and staff development expenses, especially those costs associated with conventions and conferences. But there are hard-to-value returns on your investment in these live events--beyond the obvious benefits of acquired knowledge and skills. Major vendors still exhibit their services and wares at many events, and the exhibit hall is a treasure-house of information and resources for the savvy physician or administrator. Make and stick to a purposeful plan to exploit the trade show. You can compare products, gain new insights and ideas, and even negotiate better deals with representatives anxious to realize returns on their exhibition investments. PMID:27249887

  20. Taking in a Show.

    PubMed

    Boden, Timothy W

    2016-01-01

    Many medical practices have cut back on education and staff development expenses, especially those costs associated with conventions and conferences. But there are hard-to-value returns on your investment in these live events--beyond the obvious benefits of acquired knowledge and skills. Major vendors still exhibit their services and wares at many events, and the exhibit hall is a treasure-house of information and resources for the savvy physician or administrator. Make and stick to a purposeful plan to exploit the trade show. You can compare products, gain new insights and ideas, and even negotiate better deals with representatives anxious to realize returns on their exhibition investments.

  1. Obesity in show dogs.

    PubMed

    Corbee, R J

    2013-10-01

    Obesity is an important disease with a growing incidence. Because obesity is related to several other diseases, and decreases life span, it is important to identify the population at risk. Several risk factors for obesity have been described in the literature. A higher incidence of obesity in certain breeds is often suggested. The aim of this study was to determine whether obesity occurs more often in certain breeds. The second aim was to relate the increased prevalence of obesity in certain breeds to the official standards of that breed. To this end, we investigated 1379 dogs of 128 different breeds by determining their body condition score (BCS). Overall, 18.6% of the show dogs had a BCS >5, and 1.1% of the show dogs had a BCS>7. There were significant differences between breeds, which could be correlated to the breed standards. It warrants firm discussions with breeders and judges in order to come to different interpretations of the standards to prevent overweight conditions from being the standard of beauty. PMID:22882163

  2. Let the show begin

    SciTech Connect

    Alperowicz, N.

    1993-01-27

    Major changes should occur in the European polyolefins industry this year. BASF's (Ludwigshafen) polypropylene (PP) deal with ICI is expected to be followed by that of Hoechst (Frankfurt) and Petrofina (Brussels). The two are engaged in feasibility studies for a possible joint venture in PP and are expected to make a decision in the second quarter of this year. Shell and Himont are on track to complete their feasibility study in the first quarter for a polyolefins joint venture. And Huels and PCD are still in talks. But two new possible deals, a polyolefins merger between Nests (Helsinki) and Statoil (Stavanger) and an alliance in PP involving Appryl, the Elf Atochem (51%)/BP Chemicals (49%) joint venture, and Solvay have been denied. The Hoechst/Fina venture would initially encompass only the two companies European plants - Hoechst's 550,000-m.t./year and Fina's 180,000 m.t./year. In addition, Fina would either build or acquire another PP plant. In the second stage, the partners could bring in their overseas plants. Fina has plants in the US, and Hoechst has a combined 100,000 m.t./year in south Africa and Australia. Neste's board member Jukka Viinanen says the only talks between Nests and Statoil center on renegotiations of ethylene supply contract at Stenungsund, Sweden. Nests wants a more flexible deal on quantity and price. It needs 400,000 m.t./year of ethylene for its downstream plants. Viinanen adds that he is worried about the European petrochemical industry and producers need to do everything to improve margins through pricing policies and obtaining a balance between supply and demand. On the possibility of a future link with Statoil he comments, One can never say never. It would take time. We don't feel in a very vulnerable position right now.

  3. Qualitative impact of salinity, UV radiation and turbulence on leaching of organic plastic additives from four common plastics - A lab experiment.

    PubMed

    Suhrhoff, Tim Jesper; Scholz-Böttcher, Barbara M

    2016-01-15

    Four common consumer plastic samples (polyethylene, polystyrene, polyethylene terephthalate, polyvinylchloride) were studied to investigate the impact of physical parameters such as turbulence, salinity and UV irradiance on leaching behavior of selected plastic components. Polymers were exposed to two different salinities (i.e. 0 and 35 g/kg), UV radiation and turbulence. Additives (e.g. bisphenol A, phthalates, citrates, and Irgafos® 168 phosphate) and oligomers were detected in initial plastics and aqueous extracts. Identification and quantification was performed by GC-FID/MS. Bisphenol A and citrate based additives are leached easier compared to phthalates. The print highly contributed to the chemical burden of the analyzed polyethylene bag. The study underlines a positive relationship between turbulence and magnitude of leaching. Salinity had a minor impact that differs for each analyte. Global annual release of additives from assessed plastics into marine environments is estimated to be between 35 and 917 tons, of which most are derived from plasticized polyvinylchloride.

  4. Generation, Isolation, and Characterization of a Stable Enol from Grignard Addition to a Bis-Ester: A Microscale Experiment for the Undergraduate Organic Chemistry Laboratory

    ERIC Educational Resources Information Center

    Nicaise, Olivier J. C.; Ostrom, Kyle F.; Dalke, Brent J.

    2005-01-01

    An experiment is described that introduces students to the concept of temperature-dependent stability of the tetrahedral intermediate in an acyl-transfer reaction. The process involves the determination of the structure of an alpha-ketoester and its corresponding remarkably stable enol ester to suggest a mechanism for the formation of the products.

  5. Detection of Salicylic Acid in Willow Bark: An Addition to a Classic Series of Experiments in the Introductory Organic Chemistry Laboratory

    ERIC Educational Resources Information Center

    Clay, Matthew D.; McLeod, Eric J.

    2012-01-01

    Salicylic acid and its derivative, acetylsalicylic acid, are often encountered in introductory organic chemistry experiments, and mention is often made that salicylic acid was originally isolated from the bark of the willow tree. This biological connection, however, is typically not further pursued, leaving students with an impression that biology…

  6. Public medical shows.

    PubMed

    Walusinski, Olivier

    2014-01-01

    In the second half of the 19th century, Jean-Martin Charcot (1825-1893) became famous for the quality of his teaching and his innovative neurological discoveries, bringing many French and foreign students to Paris. A hunger for recognition, together with progressive and anticlerical ideals, led Charcot to invite writers, journalists, and politicians to his lessons, during which he presented the results of his work on hysteria. These events became public performances, for which physicians and patients were transformed into actors. Major newspapers ran accounts of these consultations, more like theatrical shows in some respects. The resultant enthusiasm prompted other physicians in Paris and throughout France to try and imitate them. We will compare the form and substance of Charcot's lessons with those given by Jules-Bernard Luys (1828-1897), Victor Dumontpallier (1826-1899), Ambroise-Auguste Liébault (1823-1904), Hippolyte Bernheim (1840-1919), Joseph Grasset (1849-1918), and Albert Pitres (1848-1928). We will also note their impact on contemporary cinema and theatre. PMID:25273491

  7. Additive and subtractive coherence peaks in pump and probe experiments with high repetition rate fs laser pulses in a flowing malachite green solution

    NASA Astrophysics Data System (ADS)

    Watermann, V.; Waltinger, T.; Eichler, H. J.

    1995-02-01

    Pump and probe absorption bleaching experiments with femtosecond laser pulses in a flowing dye solution lead to a coherence peak or coherence dip at zero time delay. The size and sign of this peak are strongly affected by the flow velocity of the solution. Experimental results are in good agreement with a two-wave mixing theory, which takes pump and probe coupling by an absorption and a temperature grating into account.

  8. Stretched View Showing 'Victoria'

    NASA Technical Reports Server (NTRS)

    2006-01-01

    [figure removed for brevity, see original site] Stretched View Showing 'Victoria'

    This pair of images from the panoramic camera on NASA's Mars Exploration Rover Opportunity served as initial confirmation that the two-year-old rover is within sight of 'Victoria Crater,' which it has been approaching for more than a year. Engineers on the rover team were unsure whether Opportunity would make it as far as Victoria, but scientists hoped for the chance to study such a large crater with their roving geologist. Victoria Crater is 800 meters (nearly half a mile) in diameter, about six times wider than 'Endurance Crater,' where Opportunity spent several months in 2004 examining rock layers affected by ancient water.

    When scientists using orbital data calculated that they should be able to detect Victoria's rim in rover images, they scrutinized frames taken in the direction of the crater by the panoramic camera. To positively characterize the subtle horizon profile of the crater and some of the features leading up to it, researchers created a vertically-stretched image (top) from a mosaic of regular frames from the panoramic camera (bottom), taken on Opportunity's 804th Martian day (April 29, 2006).

    The stretched image makes mild nearby dunes look like more threatening peaks, but that is only a result of the exaggerated vertical dimension. This vertical stretch technique was first applied to Viking Lander 2 panoramas by Philip Stooke, of the University of Western Ontario, Canada, to help locate the lander with respect to orbiter images. Vertically stretching the image allows features to be more readily identified by the Mars Exploration Rover science team.

    The bright white dot near the horizon to the right of center (barely visible without labeling or zoom-in) is thought to be a light-toned outcrop on the far wall of the crater, suggesting that the rover can see over the low rim of Victoria. In figure 1, the northeast and southeast rims are labeled

  9. National Orange Show Photovoltaic Demonstration

    SciTech Connect

    Dan Jimenez Sheri Raborn, CPA; Tom Baker

    2008-03-31

    National Orange Show Photovoltaic Demonstration created a 400KW Photovoltaic self-generation plant at the National Orange Show Events Center (NOS). The NOS owns a 120-acre state fairground where it operates an events center and produces an annual citrus fair known as the Orange Show. The NOS governing board wanted to employ cost-saving programs for annual energy expenses. It is hoped the Photovoltaic program will result in overall savings for the NOS, help reduce the State's energy demands as relating to electrical power consumption, improve quality of life within the affected grid area as well as increase the energy efficiency of buildings at our venue. In addition, the potential to reduce operational expenses would have a tremendous effect on the ability of the NOS to service its community.

  10. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  11. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  12. Soil Greenhouse Gas Fluxes in a Pacific Northwest Douglas-Fir Forest: Results from a Soil Fertilization and Biochar Addition Experiment

    NASA Astrophysics Data System (ADS)

    Hawthorne, I.; Johnson, M. S.; Jassal, R. S.; Black, T. A.

    2013-12-01

    evacuated 12-mL vials and analyzed by gas chromatography. Chamber headspace GHG mixing ratios vs. time data were fit to linear and exponential models in R (Version 2.14.0) and fluxes were calculated. Results showed high variability in GHG fluxes over time in all treatments. Higher CO2 emissions were observed during early summer (119 μg CO2 m-2 s-1 in the control plots), decreasing with drought (19 μg CO2 m-2 s-1 in the control plots). CH4 uptake by soil increased during summer months from -0.004 μg CH4 m-2 s-1 to -0.089 μg CH4 m-2 s-1 in the control plots, in response to drying conditions in the upper soil profile. N2O was both consumed and emitted in all treatments, with fluxes ranging from -0.0009 to 0.0019 μg N2O m-2 s-1 in the control plots. Analysis of variance indicated that there were significant differences in GHG fluxes between treatments over time. We also investigated the potential effects of large volume headspace removal, and H2O vapour saturation leading to a dilution effect by using a closed-path infra-red gas analyzer with an inline humidity sensor.

  13. Plan Showing Cross Bracing Under Upper Stringers, Typical Section Showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan Showing Cross Bracing Under Upper Stringers, Typical Section Showing End Framing, Plan Showing Cross Bracing Under Lower Stringers, End Elevation - Covered Bridge, Spanning Contoocook River, Hopkinton, Merrimack County, NH

  14. Lessons from Recessions: Connecticut's Experience Shows Need for Strategic Planning.

    ERIC Educational Resources Information Center

    Anderes, Thomas K.

    1993-01-01

    Fiscal crisis in New England has been greater than that of early 1980s; colleges and universities should heed lessons. Presents guidelines extracted from study on organizations that effectively managed cutbacks in programs. Effective strategic planning was based on 8 preconditions that define system's capabilities to identify and react to decline…

  15. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  16. Can low dose spinal anesthesia combined with ultrasound guided bilateral ilioinguinal-iliohypogastric nerve blocks avoid use of additional epidural catheter in high risk obstetric cases? Our experience from two cases.

    PubMed

    Bhakta, P; Sharma, P K; Date, R R; Mohammad, A K

    2013-01-01

    Critical obstetric cases associated with cardiac pathology may pose real challenge for anaesthesiologist during Caesarean section. Meticulous perioperative care and suitable selection of anaesthesia technique are the key to successful outcome. Single shot spinal anaesthesia is not used any more because of serious haemodynamic consequence. Progressive and controlled epidural local anaesthetic injection is mostly used in such cases. But recently combined spinal epidural anaesthesia and continuous spinal anaesthesia are suggested due to better precise control of haemodynamics and quicker onset. However, institution of such complex technique may require time which may not be feasible in emergency situations. Use of bilateral ilioinguinal-iliohypogastric nerve block along with low dose spinal anaesthesia may obviate the need of additional epidural catheter in such complicated cases. We hereby present our experience from two cases.

  17. 8. Detail showing concrete abutment, showing substructure of bridge, specifically ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Detail showing concrete abutment, showing substructure of bridge, specifically west side of arch and substructure. - Presumpscot Falls Bridge, Spanning Presumptscot River at Allen Avenue extension, 0.75 mile west of U.S. Interstate 95, Falmouth, Cumberland County, ME

  18. 28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS LINCOLN BOULEVARD, BIG LOST RIVER, AND NAVAL REACTORS FACILITY. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-101-2. DATED OCTOBER 12, 1965. INEL INDEX CODE NUMBER: 075 0101 851 151969. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  19. Is it efficient to co-compost and co-vermicompost green waste with biochar and/or clay to reduce CO2 emissions? A short-term laboratory experiment on (vermi)composts with additives.

    NASA Astrophysics Data System (ADS)

    Barthod, Justine; Rumpel, Cornélia; Paradelo, Remigio; Dignac, Marie-France

    2016-04-01

    Intensive farming practices can lead to a depletion of soil organic matter, negatively impacting important soil properties such as structural stability, fertility and C storage. The addition of organic amendments such as compost and vermicompost, rich in carbon, helps maintaining soil organic matter levels or restoring degraded soils. Composting and vermicomposting are based on stabilization of organic matter through the mineralization of easily decomposable organic matter compounds, therefore releasing greenhouse gases, including CO2. The aim of this study was to evaluate the global potential reduction of such emissions by the use of additives (2:1 clay and/or biochar): during (vermi)composting processes and after use of the final products as soil amendments. We hypothesized that the interactions between the additives and organic matter may lead to carbon stabilization and that such interactions may be enhanced by the presence of worms (Eisenia). We added in different proportions clay (25% or 50%), biochar (10%) and a mixture of biochar (10%) with clay (25%) to pre-composted green waste. The CO2 emissions of the composting and vermicomposting processes were measured during 21 days. After that, the amendments were added to a loamy cambisol soil and the CO2 emissions were monitored during 30 days of a laboratory experiment. The most efficient treatments in terms of reducing global CO2 emissions were the co-vermicomposting process with 25% clay followed by co-composting with 50% clay and with 10% biochar plus 25% clay. In this treatment (vermicompost with 25% clay), the carbon emissions were decreased by up to 44% compared to regular compost. Addition of biochar reduced CO2 emissions only during composting. Co-composting with biochar could be a promising avenue to limit global CO2 emissions whereas in presence of worms clay additions are better suited. These findings suggest that the presence of worms increased the formation of organo-mineral associations and thus C

  20. What Do Blood Tests Show?

    MedlinePlus

    ... shows the ranges for blood glucose levels after 8 to 12 hours of fasting (not eating). It shows the normal range and the abnormal ranges that are a sign of prediabetes or diabetes. Plasma Glucose Results (mg/dL)* Diagnosis 70 to 99 ...

  1. Satellite Movie Shows Erika Dissipate

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite from Aug. 27 to 29 shows Tropical Storm Erika move through the Eastern Caribbean Sea and dissipate near eastern Cuba. ...

  2. Arches showing UV flaring activity

    NASA Technical Reports Server (NTRS)

    Fontenla, J. M.

    1988-01-01

    The UVSP data obtained in the previous maximum activity cycle show the frequent appearance of flaring events in the UV. In many cases these flaring events are characterized by at least two footpoints which show compact impulsive non-simultaneous brightenings and a fainter but clearly observed arch developes between the footpoints. These arches and footpoints are observed in line corresponding to different temperatures, as Lyman alpha, N V, and C IV, and when observed above the limb display large Doppler shifts at some stages. The size of the arches can be larger than 20 arcsec.

  3. Create a Polarized Light Show.

    ERIC Educational Resources Information Center

    Conrad, William H.

    1992-01-01

    Presents a lesson that introduces students to polarized light using a problem-solving approach. After illustrating the concept using a slinky and poster board with a vertical slot, students solve the problem of creating a polarized light show using Polya's problem-solving methods. (MDH)

  4. Pembrolizumab Shows Promise for NSCLC.

    PubMed

    2015-06-01

    Data from the KEYNOTE-001 trial show that pembrolizumab improves clinical outcomes for patients with advanced non-small cell lung cancer, and is well tolerated. PD-L1 expression in at least 50% of tumor cells correlated with improved efficacy.

  5. Magic Carpet Shows Its Colors

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The upper left image in this display is from the panoramic camera on the Mars Exploration Rover Spirit, showing the 'Magic Carpet' region near the rover at Gusev Crater, Mars, on Sol 7, the seventh martian day of its journey (Jan. 10, 2004). The lower image, also from the panoramic camera, is a monochrome (single filter) image of a rock in the 'Magic Carpet' area. Note that colored portions of the rock correlate with extracted spectra shown in the plot to the side. Four different types of materials are shown: the rock itself, the soil in front of the rock, some brighter soil on top of the rock, and some dust that has collected in small recesses on the rock face ('spots'). Each color on the spectra matches a line on the graph, showing how the panoramic camera's different colored filters are used to broadly assess the varying mineral compositions of martian rocks and soils.

  6. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  7. ShowMe3D

    SciTech Connect

    Sinclair, Michael B

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from the displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.

  8. "Show me" bioethics and politics.

    PubMed

    Christopher, Myra J

    2007-10-01

    Missouri, the "Show Me State," has become the epicenter of several important national public policy debates, including abortion rights, the right to choose and refuse medical treatment, and, most recently, early stem cell research. In this environment, the Center for Practical Bioethics (formerly, Midwest Bioethics Center) emerged and grew. The Center's role in these "cultural wars" is not to advocate for a particular position but to provide well researched and objective information, perspective, and advocacy for the ethical justification of policy positions; and to serve as a neutral convener and provider of a public forum for discussion. In this article, the Center's work on early stem cell research is a case study through which to argue that not only the Center, but also the field of bioethics has a critical role in the politics of public health policy.

  9. ShowMe3D

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from themore » displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.« less

  10. Pea Plants Show Risk Sensitivity.

    PubMed

    Dener, Efrat; Kacelnik, Alex; Shemesh, Hagai

    2016-07-11

    Sensitivity to variability in resources has been documented in humans, primates, birds, and social insects, but the fit between empirical results and the predictions of risk sensitivity theory (RST), which aims to explain this sensitivity in adaptive terms, is weak [1]. RST predicts that agents should switch between risk proneness and risk aversion depending on state and circumstances, especially according to the richness of the least variable option [2]. Unrealistic assumptions about agents' information processing mechanisms and poor knowledge of the extent to which variability imposes specific selection in nature are strong candidates to explain the gap between theory and data. RST's rationale also applies to plants, where it has not hitherto been tested. Given the differences between animals' and plants' information processing mechanisms, such tests should help unravel the conflicts between theory and data. Measuring root growth allocation by split-root pea plants, we show that they favor variability when mean nutrient levels are low and the opposite when they are high, supporting the most widespread RST prediction. However, the combination of non-linear effects of nitrogen availability at local and systemic levels may explain some of these effects as a consequence of mechanisms not necessarily evolved to cope with variance [3, 4]. This resembles animal examples in which properties of perception and learning cause risk sensitivity even though they are not risk adaptations [5]. PMID:27374342

  11. Mimas Showing False Colors #1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    False color images of Saturn's moon, Mimas, reveal variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    The image at the left is a narrow angle clear-filter image, which was separately processed to enhance the contrast in brightness and sharpness of visible features. The image at the right is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined into a single black and white picture that isolates and maps regional color differences. This 'color map' was then superimposed over the clear-filter image at the left.

    The combination of color map and brightness image shows how the color differences across the Mimas surface materials are tied to geological features. Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of each image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in

  12. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  13. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  14. Educational Outreach: The Space Science Road Show

    NASA Astrophysics Data System (ADS)

    Cox, N. L. J.

    2002-01-01

    The poster presented will give an overview of a study towards a "Space Road Show". The topic of this show is space science. The target group is adolescents, aged 12 to 15, at Dutch high schools. The show and its accompanying experiments would be supported with suitable educational material. Science teachers at schools can decide for themselves if they want to use this material in advance, afterwards or not at all. The aims of this outreach effort are: to motivate students for space science and engineering, to help them understand the importance of (space) research, to give them a positive feeling about the possibilities offered by space and in the process give them useful knowledge on space basics. The show revolves around three main themes: applications, science and society. First the students will get some historical background on the importance of space/astronomy to civilization. Secondly they will learn more about novel uses of space. On the one hand they will learn of "Views on Earth" involving technologies like Remote Sensing (or Spying), Communication, Broadcasting, GPS and Telemedicine. On the other hand they will experience "Views on Space" illustrated by past, present and future space research missions, like the space exploration missions (Cassini/Huygens, Mars Express and Rosetta) and the astronomy missions (Soho and XMM). Meanwhile, the students will learn more about the technology of launchers and satellites needed to accomplish these space missions. Throughout the show and especially towards the end attention will be paid to the third theme "Why go to space"? Other reasons for people to get into space will be explored. An important question in this is the commercial (manned) exploration of space. Thus, the questions of benefit of space to society are integrated in the entire show. It raises some fundamental questions about the effects of space travel on our environment, poverty and other moral issues. The show attempts to connect scientific with

  15. 75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) NORTH'S STORE (1900); BLACKSMITH SHOP (C. 1860, WITH ADDITIONS); AND DRYHOUSE (C. 1860, WITH ADDITIONS). C. 1905. - Quincy Mining Company, Hancock, Houghton County, MI

  16. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  17. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  18. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  19. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  20. 5. SUPERINTENDENT'S COTTAGE WEST WALL AND NORTH FRONT SHOWING CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. SUPERINTENDENT'S COTTAGE WEST WALL AND NORTH FRONT SHOWING CONCRETE BLOCK UTILITY ROOM ADDITION. - Tucson Plant Materials Center, Superintendent's Cottage, 3241 North Romero Road, Tucson, Pima County, AZ

  1. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  2. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  3. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  4. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  5. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  6. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  7. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  8. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  9. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  10. Molecular Aluminum Additive for Burn Enhancement of Hydrocarbon Fuels.

    PubMed

    Guerieri, Philip M; DeCarlo, Samantha; Eichhorn, Bryan; Connell, Terrence; Yetter, Richard A; Tang, Xin; Hicks, Zachary; Bowen, Kit H; Zachariah, Michael R

    2015-11-12

    Additives to hydrocarbon fuels are commonly explored to change the combustion dynamics, chemical distribution, and/or product integrity. Here we employ a novel aluminum-based molecular additive, Al(I) tetrameric cluster [AlBrNEt3]4 (Et = C2H5), to a hydrocarbon fuel and evaluate the resultant single-droplet combustion properties. This Al4 cluster offers a soluble alternative to nanoscale particulate additives that have recently been explored and may mitigate the observed problems of particle aggregation. Results show the [AlBrNEt3]4 additive to increase the burn rate constant of a toluene-diethyl ether fuel mixture by ∼20% in a room temperature oxygen environment with only 39 mM of active aluminum additive (0.16 wt % limited by additive solubility). In comparison, a roughly similar addition of nano-aluminum particulate shows no discernible difference in burn properties of the hydrocarbon fuel. High speed video shows the [AlBrNEt3]4 to induce microexplosive gas release events during the last ∼30% of the droplet combustion time. We attribute this to HBr gas release based on results of temperature-programmed reaction (TPR) experiments of the [AlBrNEt3]4 dosed with O2 and D2O. A possible mechanism of burn rate enhancement is presented that is consistent with microexplosion observations and TPR results. PMID:26488461

  11. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  12. Formation of porous SnS nanoplate networks from solution and their application in hybrid solar cells† †Electronic supplementary information (ESI) available: Details to performed experiments and characterisation methods, additional XRD data, absorption spectra, TAS data and SEM images. See DOI: 10.1039/c5cc03125g Click here for additional data file.

    PubMed Central

    Gury, L.; Sánchez-Molina, I.; Martínez, L.

    2015-01-01

    Herein, we present a facile solution-based route towards nanostructured, hybrid absorber layers based on tin mono-sulfide (SnS), an emerging, non-toxic absorber material for low-cost and large-scale PV applications. Charge photogeneration properties in the hybrid system are studied using transient absorption spectroscopy and fabricated solar cells show efficient photocurrent generation over a broad spectral range. PMID:26016404

  13. Showing Emulsion Properties with Common Dairy Foods

    NASA Astrophysics Data System (ADS)

    Bravo-Diaz, Carlos; Gonzalez-Romero, Elisa

    1996-09-01

    Foods are mixtures of different chemical compounds, and the quality we sense (taste, texture, color, etc.) are all manifestations of its chemical properties. Some of them can be visualized with the aid of simple, safe and inexpensive experiments using dairy products that can be found in any kitchen and using almost exclusively kitchen utensils. In this paper we propose some of them related with food emulsions. Food emulsions cover an extremely wide area of daily-life applications such as milk, sauces, dressings and beverages. Experimentation with some culinary recipes to prepare them and the analyisis of the observed results is close to ideal subject for the introduction of chemical principles, allowing to discuss about the nature and composition of foods, the effects of additives, etc. At the same time it allows to get insights into the scientific reasons that underlie on the recipes (something that it is not usually found in most cookbooks). For example, when making an emulsion like mayonnaise, why the egg yolks and water are the first materials in the bowl , and the oil is added to them rather than in the other way around? How you can "rescue" separate emulsions (mayonnaise)? Which parameters affect emulsion stability? Since safety, in its broad sense, is the first requisite for any food, concerns about food exist throughout the world and the more we are aware of our everyday life, the more likely we will be to deal productively with the consequences. On the other hand, understanding what foods are and how cooking works destroys no delightful mystery of the art of cuisine, instead the mystery expands.

  14. G254 undergraduate experiment

    NASA Technical Reports Server (NTRS)

    Barton, Doran; Bogh, Karilyn; Evans, Brett; Folkman, Steve; Hammond, Marc; Hatch, Casey; Herr, Neva; Hubble, Tina; Humpherys, Jeff; Johnson, Steve

    1992-01-01

    This paper describes the experiments on payload G254. Each experiment is accommodated in a spacepak and six experiments fly in a full canister. One of the experiments will be housed in a new Isospacepak structure, which will be described briefly. Five of the six experiments have dedicated controllers. The objective of each experiment is discussed. In addition, the operational scenario is provided.

  15. Working Memory and Children's Mental Addition.

    ERIC Educational Resources Information Center

    Adams, John W.; Hitch, Graham J.

    1997-01-01

    Two experiments investigated extent to which English- and German-speaking childrens' mental arithmetic was constrained by working memory. Found higher mental addition spans when numbers were visible throughout calculation than when not. Variation in addition span with age and arithmetical operation difficulty approximated to a linear function of…

  16. The Additive Coloration of Alkali Halides

    ERIC Educational Resources Information Center

    Jirgal, G. H.; and others

    1969-01-01

    Describes the construction and use of an inexpensive, vacuum furnace designed to produce F-centers in alkali halide crystals by additive coloration. The method described avoids corrosion or contamination during the coloration process. Examination of the resultant crystals is discussed and several experiments using additively colored crystals are…

  17. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  18. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  19. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  20. Sarks as additional fermions

    NASA Astrophysics Data System (ADS)

    Agrawal, Jyoti; Frampton, Paul H.; Jack Ng, Y.; Nishino, Hitoshi; Yasuda, Osamu

    1991-03-01

    An extension of the standard model is proposed. The gauge group is SU(2) X ⊗ SU(3) C ⊗ SU(2) S ⊗ U(1) Q, where all gauge symmetries are unbroken. The colour and electric charge are combined with SU(2) S which becomes strongly coupled at approximately 500 GeV and binds preons to form fermionic and vector bound states. The usual quarks and leptons are singlets under SU(2) X but additional fermions, called sarks. transform under it and the electroweak group. The present model explains why no more than three light quark-lepton families can exist. Neutral sark baryons, called narks, are candidates for the cosmological dark matter having the characteristics designed for WIMPS. Further phenomenological implications of sarks are analyzed i including electron-positron annihilation. Z 0 decay, flavor-changing neutral currents. baryon-number non-conservation, sarkonium and the neutron electric dipole moment.

  1. Temperature Data Shows Warming in 2001

    NASA Technical Reports Server (NTRS)

    2002-01-01

    TThe figure above depicts how much air temperatures near the Earth's surface changed relative to the global mean temperature from 1951 to 1980. NASA researchers used maps of urban areas derived from city lights data to account for the 'heat island' effect of cities. The red and orange colors show that temperatures are warmer in most regions of the world when compared to the 1951 to 1980 'normal' temperatures. Warming around the world has been widespread, but it is not present everywhere. The largest warming is in Northern Canada, Alaska and Siberia, as indicated by the deeper red colors. The lower 48 United States have become warmer recently, but only enough to make the temperatures comparable to what they were in the 1930s. The scale on the bottom of these temperature anomaly images represent degrees in Celsius. The negative numbers represent cooling and the positive numbers depict warming. Overall, the air temperature near the Earth's surface has warmed by 1oF (0.6oC) globally, on average, over the last century. For more information and additional images, read Satellites Shed Light on a Warmer World. Image courtesy Goddard Institute for Space Studies (GISS).

  2. GOES-West Shows U.S. West's Record Rainfall

    NASA Video Gallery

    A new time-lapse animation of data from NOAA's GOES-West satellite provides a good picture of why the U.S. West Coast continues to experience record rainfall. The new animation shows the movement o...

  3. Using a biomimetic membrane surface experiment to investigate the activity of the magnetite biomineralisation protein Mms6† †Electronic supplementary information (ESI) available: Including Mms6 protein and peptide sequences, additional QCM-D and SEM data and protein modelling. See DOI: 10.1039/c5ra16469a Click here for additional data file.

    PubMed Central

    Bird, Scott M.; Rawlings, Andrea E.; Galloway, Johanna M.

    2016-01-01

    Magnetotactic bacteria are able to synthesise precise nanoparticles of the iron oxide magnetite within their cells. These particles are formed in dedicated organelles termed magnetosomes. These lipid membrane compartments use a range of biomineralisation proteins to nucleate and regulate the magnetite crystallisation process. A key component is the membrane protein Mms6, which binds to iron ions and helps to control the formation of the inorganic core. We have previously used Mms6 on gold surfaces patterned with a self-assembled monolayer to successfully produce arrays of magnetic nanoparticles. Here we use this surface system as a mimic of the interior face of the magnetosome membrane to study differences between intact Mms6 and the acid-rich C-terminal peptide subregion of the Mms6 protein. When immobilised on surfaces, the peptide is unable to reproduce the particle size or homogeneity control exhibited by the full Mms6 protein in our experimental setup. Moreover, the peptide is unable to support anchoring of a dense array of nanoparticles to the surface. This system also allows us to deconvolute particle binding from particle nucleation, and shows that Mms6 particle binding is less efficient when supplied with preformed magnetite nanoparticles when compared to particles precipitated from solution in the presence of the surface immobilised Mms6. This suggests that Mms6 binds to iron ions rather than to magnetite surfaces in our system, and is perhaps a nucleating agent rather than a controller of magnetite crystal growth. The comparison between the peptide and the protein under identical experimental conditions indicates that the full length sequence is required to support the full function of Mms6 on surfaces. PMID:27019707

  4. Open PHACTS computational protocols for in silico target validation of cellular phenotypic screens: knowing the knowns† †The authors declare no competing interests. ‡ ‡Electronic supplementary information (ESI) available: Pipeline Pilot protocols, xls file with the output of the Pipeline Pilot protocols, KNIME workflows, and supplementary figures showing the Pipeline Pilot protocols. See DOI: 10.1039/c6md00065g Click here for additional data file.

    PubMed Central

    Zdrazil, B.; Neefs, J.-M.; Van Vlijmen, H.; Herhaus, C.; Caracoti, A.; Brea, J.; Roibás, B.; Loza, M. I.; Queralt-Rosinach, N.; Furlong, L. I.; Gaulton, A.; Bartek, L.; Senger, S.; Chichester, C.; Engkvist, O.; Evelo, C. T.; Franklin, N. I.; Marren, D.; Ecker, G. F.

    2016-01-01

    Phenotypic screening is in a renaissance phase and is expected by many academic and industry leaders to accelerate the discovery of new drugs for new biology. Given that phenotypic screening is per definition target agnostic, the emphasis of in silico and in vitro follow-up work is on the exploration of possible molecular mechanisms and efficacy targets underlying the biological processes interrogated by the phenotypic screening experiments. Herein, we present six exemplar computational protocols for the interpretation of cellular phenotypic screens based on the integration of compound, target, pathway, and disease data established by the IMI Open PHACTS project. The protocols annotate phenotypic hit lists and allow follow-up experiments and mechanistic conclusions. The annotations included are from ChEMBL, ChEBI, GO, WikiPathways and DisGeNET. Also provided are protocols which select from the IUPHAR/BPS Guide to PHARMACOLOGY interaction file selective compounds to probe potential targets and a correlation robot which systematically aims to identify an overlap of active compounds in both the phenotypic as well as any kinase assay. The protocols are applied to a phenotypic pre-lamin A/C splicing assay selected from the ChEMBL database to illustrate the process. The computational protocols make use of the Open PHACTS API and data and are built within the Pipeline Pilot and KNIME workflow tools. PMID:27774140

  5. Moon Phase & Libration 2013: Additional Graphics

    NASA Video Gallery

    This visualization shows the phase and libration of the Moon throughout the year 2013, at hourly intervals. Each frame represents one hour. In addition, this version of the visualization shows addi...

  6. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  7. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  8. Show Horse Welfare: Horse Show Competitors' Understanding, Awareness, and Perceptions of Equine Welfare.

    PubMed

    Voigt, Melissa A; Hiney, Kristina; Richardson, Jennifer C; Waite, Karen; Borron, Abigail; Brady, Colleen M

    2016-01-01

    The purpose of this study was to gain a better understanding of stock-type horse show competitors' understanding of welfare and level of concern for stock-type show horses' welfare. Data were collected through an online questionnaire that included questions relating to (a) interest and general understanding of horse welfare, (b) welfare concerns of the horse show industry and specifically the stock-type horse show industry, (c) decision-making influences, and (d) level of empathic characteristics. The majority of respondents indicated they agree or strongly agree that physical metrics should be a factor when assessing horse welfare, while fewer agreed that behavioral and mental metrics should be a factor. Respondent empathy levels were moderate to high and were positively correlated with the belief that mental and behavioral metrics should be a factor in assessing horse welfare. Respondents indicated the inhumane practices that most often occur at stock-type shows include excessive jerking on reins, excessive spurring, and induced excessive unnatural movement. Additionally, respondents indicated association rules, hired trainers, and hired riding instructors are the most influential regarding the decisions they make related to their horses' care and treatment.

  9. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  10. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  11. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  12. 8. July 1973. VIEW OF WEST END OF WORKS, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. July 1973. VIEW OF WEST END OF WORKS, SHOWING LEFT-TO-RIGHT: ELEVATOR, GABLED END OF ORIGINAL BUILDING, TWO-STORY 1905 ADDITION, AND BLACKSMITH SHOP ADDITIONS. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  13. PLANAR VIEW OF REAR (NORTHWEST) SIDE OF GARAGE, SHOWING FLAMMABLES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PLANAR VIEW OF REAR (NORTHWEST) SIDE OF GARAGE, SHOWING FLAMMABLES LOCKER AND ADDITION ON RIGHT, VIEW TOWARDS SOUTHEAST - Moore Haven Lock, Garage, Cross-State Canal, Okeechobee Intracoastal Waterway, Moore Haven, Glades County, FL

  14. 33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLAN AND LOCATION OF PROPOSED ADDITIONS, METROPOLITAN WATER AND SEWERAGE BOARD, METROPOLITAN SEWERAGE WORKS, JULY 1908. Aperture card 6417. - Deer Island Pumping Station, Boston, Suffolk County, MA

  15. 3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING A GROUP OF HAGERSTOWN HIGH SCHOOL STUDENTS IN THE PROCESS OF UNCOVERING THE ADDITIONAL FOUNDATION - Jonathan Hager House (Foundation), Hagerstown, Washington County, MD

  16. Antenna cab interior showing waveguide from external parabolic antenna (later ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Antenna cab interior showing waveguide from external parabolic antenna (later addition), looking north. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

  17. View southeast of the barn showing its northwest corner. The ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View southeast of the barn showing its northwest corner. The collapsing chicken coop addition is shown at the northeast corner, upper left. - Tassi Ranch, Tassi Springs, Littlefield, Mohave County, AZ

  18. 32. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLANT AND LOCATION OF PROPOSED ADDITIONS, JULY 1898 SHEET NO. 1. Aperture card 4966-1 - Deer Island Pumping Station, Boston, Suffolk County, MA

  19. Interior view of north wall inside building 68 showing structural ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of north wall inside building 68 showing structural details. Door is access into small addition on north side of building. - Naval Air Station North Island, Seaplane Hangars, Roe Street, North Island, San Diego, San Diego County, CA

  20. 3. Exterior, detail view of north elevation, from northeast, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Exterior, detail view of north elevation, from northeast, showing joint of addition. Sept. 12, 1940. Mixon. - Upper Swedish Log Cabin, Darby Creek vicinity, Clifton Heights (Upper Darby Township), Darby, Delaware County, PA

  1. 11. SOUTH AND EAST SIDE, THREEQUARTER VIEW, DETAIL SHOWING SIXTHFLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. SOUTH AND EAST SIDE, THREE-QUARTER VIEW, DETAIL SHOWING SIXTH-FLOOR BRICK ADDITION AND ORIGINAL BRICK PILASTERS; LOOKING NORTHWEST - Crown Roller Mill, 105 Fifth Avenue, South, West Side Milling District, Minneapolis, Hennepin County, MN

  2. 5. SOUTHWEST CORNER, SHOWING WEST ELEVATION WITH BUILDING 8251 (AIRCRAFT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. SOUTHWEST CORNER, SHOWING WEST ELEVATION WITH BUILDING 8251 (AIRCRAFT MAINTENANCE AND REPAIR SHOPS BUILDING ADDITION) AT LEFT. - Loring Air Force Base, Arch Hangar, East of Arizona Road near southern end of runway, Limestone, Aroostook County, ME

  3. 7. INTERIOR OF LIVING ROOM SHOWING REMNANT OF ORIGINAL END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR OF LIVING ROOM SHOWING REMNANT OF ORIGINAL END WALL AND SMOOTH DRY-WALL FINISH OF 1965 ADDITION IN BACKGROUND. VIEW TO SOUTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  4. 7. VIEW SOUTHWEST, SHOWING NORTHEAST CORNER ENTRANCES TO TWO SERVICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW SOUTHWEST, SHOWING NORTHEAST CORNER ENTRANCES TO TWO SERVICE BAYS AND SHED ADDITION ON EAST WALL - Chesapeake Beach Railroad Engine House, 21 Yost Place, Seat Pleasant, Prince George's County, MD

  5. DAST in Flight Showing Diverging Wingtip Oscillations

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Two BQM-34 Firebee II drones were modified with supercritical airfoils, called the Aeroelastic Research Wing (ARW), for the Drones for Aerodynamic and Structural Testing (DAST) program, which ran from 1977 to 1983. In this view of DAST-1 (Serial # 72-1557), taken on June 12, 1980, severe wingtip flutter is visible. Moments later, the right wing failed catastrophically and the vehicle crashed near Cuddeback Dry Lake. Before the drone was lost, it had made two captive and two free flights. Its first free flight, on October 2, 1979, was cut short by an uplink receiver failure. The drone was caught in midair by an HH-3 helicopter. The second free flight, on March 12, 1980, was successful, ending in a midair recovery. The third free flight, made on June 12, was to expand the flutter envelope. All of these missions launched from the NASA B-52. From 1977 to 1983, the Dryden Flight Research Center, Edwards, California, (under two different names) conducted the DAST Program as a high-risk flight experiment using a ground-controlled, pilotless aircraft. Described by NASA engineers as a 'wind tunnel in the sky,' the DAST was a specially modified Teledyne-Ryan BQM-34E/F Firebee II supersonic target drone that was flown to validate theoretical predictions under actual flight conditions in a joint project with the Langley Research Center, Hampton, Virginia. The DAST Program merged advances in electronic remote control systems with advances in airplane design. Drones (remotely controlled, missile-like vehicles initially developed to serve as gunnery targets) had been deployed successfully during the Vietnamese conflict as reconnaissance aircraft. After the war, the energy crisis of the 1970s led NASA to seek new ways to cut fuel use and improve airplane efficiency. The DAST Program's drones provided an economical, fuel-conscious method for conducting in-flight experiments from a remote ground site. DAST explored the technology required to build wing structures with less than

  6. Variation in the peacock's train shows a genetic component.

    PubMed

    Petrie, Marion; Cotgreave, Peter; Pike, Thomas W

    2009-01-01

    Female peafowl (Pavo cristatus) show a strong mating preference for males with elaborate trains. This, however, poses something of a paradox because intense directional selection should erode genetic variation in the males' trains, so that females will no longer benefit by discriminating among males on the basis of these traits. This situation is known as the 'lek paradox', and leads to the theoretical expectation of low heritability in the peacock's train. We used two independent breeding experiments, involving a total of 42 sires and 86 of their male offspring, to estimate the narrow sense heritabilities of male ornaments and other morphometric traits. Contrary to expectation, we found significant levels of heritability in a trait known to be used by females during mate choice (train length), while no significant heritabilities were evident for other, non-fitness related morphological traits (tarsus length, body weight or spur length). This study adds to the building body of evidence that high levels of additive genetic variance can exist in secondary sexual traits under directional selection, but further emphasizes the main problem of what maintains this variation.

  7. Variation in the peacock's train shows a genetic component.

    PubMed

    Petrie, Marion; Cotgreave, Peter; Pike, Thomas W

    2009-01-01

    Female peafowl (Pavo cristatus) show a strong mating preference for males with elaborate trains. This, however, poses something of a paradox because intense directional selection should erode genetic variation in the males' trains, so that females will no longer benefit by discriminating among males on the basis of these traits. This situation is known as the 'lek paradox', and leads to the theoretical expectation of low heritability in the peacock's train. We used two independent breeding experiments, involving a total of 42 sires and 86 of their male offspring, to estimate the narrow sense heritabilities of male ornaments and other morphometric traits. Contrary to expectation, we found significant levels of heritability in a trait known to be used by females during mate choice (train length), while no significant heritabilities were evident for other, non-fitness related morphological traits (tarsus length, body weight or spur length). This study adds to the building body of evidence that high levels of additive genetic variance can exist in secondary sexual traits under directional selection, but further emphasizes the main problem of what maintains this variation. PMID:17922297

  8. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  9. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  10. "No-Shows": A Vexing Problem.

    ERIC Educational Resources Information Center

    Holmes, John; And Others

    1980-01-01

    What can we learn about the applicants who do not show up on campus to register? This study suggests both a method for learning more about "no-shows" and the reasons why they change their mind. (Author)

  11. Alzheimer's Gene May Show Effects in Childhood

    MedlinePlus

    ... page: https://medlineplus.gov/news/fullstory_159854.html Alzheimer's Gene May Show Effects in Childhood Brain scans ... 13, 2016 (HealthDay News) -- A gene related to Alzheimer's disease may start to show effects on brain ...

  12. Modification of a vortex street by a polymer additive

    NASA Astrophysics Data System (ADS)

    Cressman, J. R.; Bailey, Q.; Goldburg, W. I.

    2001-04-01

    A Kármán vortex street is created in a flowing soap film by a rod penetrating the film. The velocity field generated by this rod is modified by the addition of the polymer polyethylene oxide having a molecular weight of 5×106 and a concentration of 30 wppm. The rms velocity fluctuations behind the rod are strongly suppressed by the polymer additive and the power spectrum of the velocity fluctuations is modified as well. The experiments show that the polymer additive decreases the rate at which energy is injected into the flow. The measurements further indicate that the polymer introduces an elongational viscosity term into the Navier-Stokes equation.

  13. The Demise of the Magic Lantern Show

    ERIC Educational Resources Information Center

    Schneider, Edward W.

    2006-01-01

    Extracting and applying lessons from history is rarely easy and sometimes risky but there are moments when historical records are so compelling that they rise above mere proof to the level of interocular impact. In this article, the author shares his similar experience while visiting his colleague, Professor Bruce Clark, at the University of…

  14. Children Show Selective Trust in Technological Informants

    ERIC Educational Resources Information Center

    Danovitch, Judith H.; Alzahabi, Reem

    2013-01-01

    Although children are often exposed to technological devices early in life, little is known about how they evaluate these novel sources of information. In two experiments, children aged 3, 4, and 5 years old ("n" = 92) were presented with accurate and inaccurate computer informants, and they subsequently relied on information provided by…

  15. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  16. TRIO experiment

    SciTech Connect

    Clemmer, R.G.; Finn, P.A.; Malecha, R.F.; Misra, B.; Billone, M.C.; Bowers, D.L.; Fischer, A.K.; Greenwood, L.R.; Mattas, R.F.; Tam, S.W.

    1984-09-01

    The TRIO experiment is a test of in-situ tritium recovery and heat transfer performance of a miniaturized solid breeder blanket assembly. The assembly (capsule) was monitored for temperature and neutron flux profiles during irradiation and a sweep gas flowed through the capsule to an anaytical train wherein the amounts of tritium in its various chemical forms were determined. The capsule was designed to operate at different temperatures and sweep gas conditions. At the end of the experiment the amount of tritium retained in the solid was at a concentration of less than 0.1 wppM. More than 99.9% of tritium generated during the experiment was successfully recovered. The results of the experiment showed that the tritium inventories at the beginning and at the end of the experiment follow a relationship which appears to be characteristic of intragranular diffusion.

  17. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  18. Re(de)fining the orthographic neighborhood: the role of addition and deletion neighbors in lexical decision and reading.

    PubMed

    Davis, Colin J; Perea, Manuel; Acha, Joana

    2009-10-01

    The influence of addition and deletion neighbors on visual word identification was investigated in four experiments. Experiments 1 and 2 used Spanish stimuli. In Experiment 1, lexical decision latencies were slower and less accurate for words and nonwords with higher-frequency deletion neighbors (e.g., jugar in juzgar), relative to control stimuli. Experiment 2 showed a similar interference effect for words and nonwords with higher-frequency addition neighbors (e.g., conejo, which has the addition neighbor consejo), relative to control stimuli. Experiment 3 replicated this addition neighbor interference effect in a lexical decision experiment with English stimuli. Across all three experiments, interference effects were always evident for addition/deletion neighbors with word-outer overlap, usually present for those with word-initial overlap, but never present for those with word-final overlap. Experiment 4 replicated the addition/deletion neighbor inhibitory effects in a Spanish sentence reading task in which the participants' eye movements were monitored. These findings suggest that conventional orthographic neighborhood metrics should be redefined. In addition to its methodological implications, this conclusion has significant theoretical implications for input coding schemes and the mechanisms underlying word recognition. PMID:19803656

  19. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  20. Priming Addition Facts with Semantic Relations

    ERIC Educational Resources Information Center

    Bassok, Miriam; Pedigo, Samuel F.; Oskarsson, An T.

    2008-01-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations…

  1. The Language of Show Biz: A Dictionary.

    ERIC Educational Resources Information Center

    Sergel, Sherman Louis, Ed.

    This dictionary of the language of show biz provides the layman with definitions and essays on terms and expressions often used in show business. The overall pattern of selection was intended to be more rather than less inclusive, though radio, television, and film terms were deliberately omitted. Lengthy explanations are sometimes used to express…

  2. Serving Up Activities for TV Cooking Shows.

    ERIC Educational Resources Information Center

    Katchen, Johanna E.

    This paper documents a presentation given on the use of English-language television cooking shows in English-as-a-Second-Language (ESL) and English-as-a-Foreign-Language (EFL) classrooms in Taiwan. Such shows can be ideal for classroom use, since they have a predictable structure consisting of short segments, are of interest to most students,…

  3. The Physics of Equestrian Show Jumping

    ERIC Educational Resources Information Center

    Stinner, Art

    2014-01-01

    This article discusses the kinematics and dynamics of equestrian show jumping. For some time I have attended a series of show jumping events at Spruce Meadows, an international equestrian center near Calgary, Alberta, often referred to as the "Wimbledon of equestrian jumping." I have always had a desire to write an article such as this…

  4. Nature's Late-Night Light Shows

    NASA Astrophysics Data System (ADS)

    Peterson, Carolyn Collins

    2002-09-01

    In addition to stars and planets, there are other interesting lights to be seen in the night sky. The northern and southern lights, called the aurora borealis and aurora australis, are created by charged particles from the Sun reacting in Earth's magnetic field. Night-shining clouds or noctilucent clouds appear at evening twilight as a result of water vapor in the polar mesosphere. Zodiacal light can be seen stretching up from the horizon after sunset or before sunrise.

  5. Priming addition facts with semantic relations.

    PubMed

    Bassok, Miriam; Pedigo, Samuel F; Oskarsson, An T

    2008-03-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations between the priming words were either aligned or misaligned with the structure of addition (M. Bassok, V. M. Chase, & S. A. Martin, 1998). Obligatory activation of addition facts occurred when the digits were primed by categorically related words (tulips-daisies), which are aligned with addition, but did not occur when the digits were primed by unrelated words (hens-radios, Experiment 1) or by functionally related words (records-songs, Experiment 2), which are misaligned with addition. These findings lend support to the viability of automatic analogical priming (B. A. Spellman, K. J. Holyoak, & R. G. Morrison, 2001) and highlight the relevance of arithmetic applications to theoretical accounts of mental arithmetic. PMID:18315410

  6. Comparison of Weather Shows in Eastern Europe

    NASA Astrophysics Data System (ADS)

    Najman, M.

    2009-09-01

    Comparison of Weather Shows in Eastern Europe Television weather shows in Eastern Europe have in most cases in the high graphical standard. There is though a wast difference in duration and information content in the weather shows. There are few signs and regularities by which we can see the character of the weather show. The main differences are mainly caused by the income structure of the TV station. Either it is a fully privately funded TV relying on the TV commercials income. Or it is a public service TV station funded mainly by the national budget or fixed fee structure/tax. There are wast differences in duration and even a graphical presentation of the weather. Next important aspect is a supplier of the weather information and /or the processor. Shortly we can say, that when the TV show is produced by the national met office, the TV show consists of more scientific terms, synoptic maps, satellite imagery, etc. If the supplier is the private meteorological company, the weather show is more user-friendly, laical with less scientific terms. We are experiencing a massive shift in public weather knowledge and demand for information. In the past, weather shows consisted only of maps with weather icons. In todaýs world, even the laic weather shows consist partly of numerical weather model outputs - they are of course designed to be understandable and graphically attractive. Outputs of the numerical weather models used to be only a part of daily life of a professional meteorologist, today they are common part of life of regular people. Video samples are a part of this presentation.

  7. GOES Satellite Data Shows Tornado Development

    NASA Video Gallery

    This animation of NOAA's GOES-East satellite data shows the development and movement of the weather system that spawned tornadoes affecting the southern and eastern U.S. states on April 27-29, 2014...

  8. TRMM Satellite Shows Heavy Rainfall in Cristina

    NASA Video Gallery

    NASA's TRMM satellite rainfall data was overlaid on an enhanced visible/infrared image from NOAA's GOES-East satellite showing cloud and rainfall extent. Green areas indicate rainfall at over 20 mm...

  9. Spacecraft Image Mashup Shows Galactic Collision

    NASA Video Gallery

    This new composite image from the Chandra X-ray Observatory, the Hubble Space Telescope, and the Spitzer Space Telescope shows two colliding galaxies more than a 100 million years after they first ...

  10. Career development at London Vet Show.

    PubMed

    2016-09-01

    Are you considering a career change? Perhaps you want help to develop within your current role? Either way, you will find a relevant session in the BVA Career Development stream at the London Vet Show in November. PMID:27585901

  11. An Easy Way to Show Memory Color Effects

    PubMed Central

    2016-01-01

    This study proposes and evaluates a simple stimulus display that allows one to measure memory color effects (the effect of object knowledge and memory on color perception). The proposed approach is fast and easy and does not require running an extensive experiment. It shows that memory color effects are robust to minor variations due to a lack of color calibration. PMID:27698988

  12. An Easy Way to Show Memory Color Effects

    PubMed Central

    2016-01-01

    This study proposes and evaluates a simple stimulus display that allows one to measure memory color effects (the effect of object knowledge and memory on color perception). The proposed approach is fast and easy and does not require running an extensive experiment. It shows that memory color effects are robust to minor variations due to a lack of color calibration.

  13. Emerging Trends in Contextual Learning Show Positive Results for Students.

    ERIC Educational Resources Information Center

    WorkAmerica, 2001

    2001-01-01

    This issue focuses on contextual learning (CL), in which students master rigorous academic content in real-world or work-based learning experiences. "Emerging Trends in CL Show Positive Results for Students" discusses CL as an important strategy for improving student achievement. It describes: how CL raises the bar for all students, challenging…

  14. Map showing fluorspar deposits in Colorado

    USGS Publications Warehouse

    Brady, Bruce T.

    1975-01-01

    Increased fluorine consumption (U.S. Bureau of Mines, 1946-1971) coupled with limited proved reserves has stimulated extensive exploration for fluorine and intensive research into developing new sources of fluorine or substitutes. A summary of the distribution, geochemical and geologic environments, and production history of selected fluorspar occurrences, deposits, and districts is provided here with the hope that this information will help to stimulate exploration and discovery of additional fluorspar resources in Colorado to augment our dwindling domestic supply.

  15. Liquid Crystal Research Shows Deformation By Drying

    NASA Technical Reports Server (NTRS)

    2003-01-01

    These images, from David Weitz's liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.

  16. [Keeping of horses in circus and show businesses].

    PubMed

    Pollmann, U

    2002-03-01

    The conditions under which horses are kept and the performance of acts in the circus ring may give rise to animal protection-relevant aspects for circus and show horses. A number of intolerable conditions under which horses are kept and procedures adopted for the work with circus and show horses are described. In addition, attention is drawn to monitoring methods capable of exposing the deplorable shortcomings of these businesses.

  17. Showing R-Rated Videos in School.

    ERIC Educational Resources Information Center

    Zirkel, Perry A.

    1999-01-01

    Since 1990, there have been at least six published court decisions concerning teachers' use of controversial videos in public schools. A relevant district policy led the Colorado Supreme Court to uphold a teacher's termination for showing 12th graders an R-rated 1900 Bertolucci film on fascism. Implications are discussed. (MLH)

  18. State Data Show Gains in Reading

    ERIC Educational Resources Information Center

    Manzo, Kathleen Kennedy

    2007-01-01

    Schools taking part in the federal Reading First program are showing significant progress in boosting students' reading fluency and comprehension, according to state-reported data compiled and released by the U.S. Department of Education last week. In releasing for the first time detailed, multiyear data on how Reading First schools are performing…

  19. Show Them You Really Want the Job

    ERIC Educational Resources Information Center

    Perlmutter, David D.

    2012-01-01

    Showing that one really "wants" the job entails more than just really wanting the job. An interview is part Broadway casting call, part intellectual dating game, part personality test, and part, well, job interview. When there are 300 applicants for a position, many of them will "fit" the required (and even the preferred) skills listed in the job…

  20. Showing Enantiomorphous Crystals of Tartaric Acid

    ERIC Educational Resources Information Center

    Andrade-Gamboa, Julio

    2007-01-01

    Most of the articles and textbooks that show drawings of enantiomorphous crystals use an inadequate view to appreciate the fact that they are non-superimposable mirror images of one another. If a graphical presentation of crystal chirality is not evident, the main attribute of crystal enantiomorphism can not be recognized by students. The classic…

  1. A Talk Show from the Past.

    ERIC Educational Resources Information Center

    Gallagher, Arlene F.

    1991-01-01

    Describes a two-day activity in which elementary students examine voting rights, the right to assemble, and women's suffrage. Explains the game, "Assemble, Reassemble," and a student-produced talk show with five students playing the roles of leaders of the women's suffrage movement. Profiles Elizabeth Cady Stanton, Lucretia Mott, Susan B. Anthony,…

  2. Tilapia show immunization response against Ich

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compares the immune response of Nile tilapia and red tilapia against parasite Ichthyophthirius multifiliis (Ich) using a cohabitation challenge model. Both Nile and red tilapia showed strong immune response post immunization with live Ich theronts by IP injection or immersion. Blood serum...

  3. The case against showing patients their records.

    PubMed

    Ross, A P

    1986-03-01

    The author, a British consultant surgeon, expresses his reservations about patients' having access to their medical records. The nature of communication between doctors may change if it is known that patients will see the material; potentially helpful yet tentative diagnoses may be excluded while other information is watered down. Physicians will have additional, perhaps burdensome, demands placed on them to explain the records--including parts written by deceased or otherwise unavailable doctors, medical students, or nonphysicians. Persons other than patients may see the records, further complicating the issue. Ross asserts that, while patients do have the right to see records, full access could be more harmful than beneficial to patients and could be fraught with problems for physicians.

  4. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  5. 10. Photocopy of c. 1912 photograph looking N showing original ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photocopy of c. 1912 photograph looking N showing original c. 1845 brick mill with c. 1897 3-story, wood-frame addition at end; cane shed extends out to the left. - Laurel Valley Sugar Plantation, Sugar Mill, 2 miles South of Thibodaux on State Route 308, Thibodaux, Lafourche Parish, LA

  6. 4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO WALL FINISH, LOOKING SOUTH; 1906-1910 ONE-STORY SHED ADDITION WITH ROOF MONITOR IS IN FOREGROUND LEFT - Massachusetts Mills, Cloth Room-Section 15, 95 Bridge Street, Lowell, Middlesex County, MA

  7. 167. ARAIII Plot plan as of 1986. Shows most of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    167. ARA-III Plot plan as of 1986. Shows most of original army buildings in addition to location for buildings ARA-621 and ARA-630, which were built in 1969 after army program had been canceled. Date: March 1986. Ineel index code no. 063-0100-00-220-421241. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  8. 18. THIS VIEW, LOOKING NORTHEAST AND UPWARD, SHOWS THE CAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. THIS VIEW, LOOKING NORTHEAST AND UPWARD, SHOWS THE CAST PANEL CONTAINING THE CONSTRUCTION DATE, WHICH IS LOCATED ABOVE THE CENTRAL PIER. ADDITIONAL I-SECTIONS HAVE BEEN USED TO STABILIZE THE BRIDGE SLIPPAGE. - Putnam County Bridge No. 111, Spanning Little Walnut Creek on County Road 50, Greencastle, Putnam County, IN

  9. View of building 11050 looking northeast, showing metal sided and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 looking northeast, showing metal sided and roofed addition on east elevation. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Fire Station & Marine Barracks, D Street, at corner of 4th Street, China Lake, Kern County, CA

  10. 5. Photocopy of old exterior photo showing Western Saving Fund ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photocopy of old exterior photo showing Western Saving Fund Society before the addition of ca. 1910 building. Original photo, late 19th century, is at the Philadelphia Free Library, Philadelphia Collection, Print and Picture Department. - Western Saving Fund Society of Philadelphia, 1000-1008 Walnut Street, Philadelphia, Philadelphia County, PA

  11. 5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME, AND CONCRETE STEPS TO SIDE ENTRY DOOR AT PHOTO RIGHT. CHANGE IN EXTERIOR WALL DELINEATING 1946 BEDROOM ADDITION AND REMODELED WINDOW TO BATHROOM ARE VISIBLE AT PHOTO LEFT. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  12. 4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM PORCH ADDITION AND WINDOWS ALONG BACK (WEST SIDE) OF HOUSE. NOTE ORIGNAL SHORT CHIMNEY AT CREST OF ROOF. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  13. 5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR TO BASEMENT BELOW KITCHEN, ORIGINAL PAIRED WOODFRAMED SLIDING-GLASS WINDOWS ON KITCHEN WALL AND 1LIGHT OVER 1-LIGHT DOUBLE-HUNG WINDOW ON STORM PORCH ADDITION. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  14. 3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF MILLS HALL MAIN WING, NORTH WALL, ALL OF MILLS HALL NORTH WING WEST WALL, AND ADDITION NORTH AND WEST WALLS. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  15. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  16. [Patch-testing methods: additional specialised or additional series].

    PubMed

    Cleenewerck, M-B

    2009-01-01

    The tests in the European standard battery must occasionally be supplemented by specialised or additional batteries, particularly where the contact allergy is thought to be of occupational origin. These additional batteries cover all allergens associated with various professional activities (hairdressing, baking, dentistry, printing, etc.) and with different classes of materials and chemical products (glue, plastic, rubber...). These additional tests may also include personal items used by patients on a daily basis such as cosmetics, shoes, plants, textiles and so on.

  17. Idaho State University Physics Road Show

    NASA Astrophysics Data System (ADS)

    Shropshire, Steve

    2009-05-01

    The ISU Physics Road Show services over 40 schools and 12,000 students each year. Exciting and informative demonstration shows are conducted during assemblies at elementary, middle, and junior high schools. Discussion will focus on efforts taken to maximize the educational impact to students and teachers. These efforts include supplemental information and materials provided to teachers, teacher workshops, and careful catering of subject material to state and national education standards. A few sample demonstrations will be performed, including the boiling green water sucker, a magnet strongly repelled from a cooled copper disc, an artificial geyser that shoots water 6 meters, and a few liquid nitrogen tricks. This program is supported in part by a grant from the Idaho Community Foundation.

  18. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  19. Research shows targeted HIV prevention succeeds.

    PubMed

    2002-03-01

    Systematic reviews of HIV prevention intervention literature for the target populations of African-Americans, Latinos, youths, and men who have sex with men in the United States shows that targeted interventions work in reducing HIV risk behaviors. Interventions that succeeded were culturally sensitive, of longer duration, and included skills training, according to a project supported by the Surgeon General's Leadership Campaign on AIDS and teh California HealthCare Foundation in Oakland. PMID:12206092

  20. The Physics of Equestrian Show Jumping

    NASA Astrophysics Data System (ADS)

    Stinner, Art

    2014-04-01

    This article discusses the kinematics and dynamics of equestrian show jumping. For some time I have attended a series of show jumping events at Spruce Meadows, an international equestrian center near Calgary, Alberta, often referred to as the "Wimbledon of equestrian jumping." I have always had a desire to write an article such as this one, but when I searched the Internet for information and looked at YouTube presentations, I could only find simplistic references to Newton's laws and the conservation of mechanical energy principle. Nowhere could I find detailed calculations. On the other hand, there were several biomechanical articles with empirical reports of the results of kinetic and dynamic investigations of show jumping using high-speed digital cameras and force plates. They summarize their results in tables that give information about the motion of a horse jumping over high fences (1.40 m) and the magnitudes of the forces encountered when landing. However, they do not describe the physics of these results.

  1. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  2. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting. PMID:25500631

  3. Extinguished operant responding shows stimulus specificity.

    PubMed

    McSweeney, Frances K; Murphy, Eric S; Kowal, Benjamin P

    2004-03-31

    The experiment tested for stimulus specificity in extinguished operant responding. Eight pigeons pecked keys for food reinforcers delivered by a variable interval (VI) 60-s schedule. The key was illuminated with red light during some sessions and white light during others. Then, responding was placed on extinction. During some sessions of extinction, the color of the key light remained constant throughout the session (red or white). During other sessions the color changed at 30 min into the session (red to white or white to red). Response rate increased after the change of key color in extinction. If it is assumed that key color is part of the stimulus to which subjects habituate, then these results are consistent with McSweeney and Swindell's [J. Gen. Psychol. 129 (2002) 364] suggestion that responding declines in extinction partly because subjects habituate to the stimuli that support conditioned responding. Habituation is relatively specific to the exact nature of the stimulus presented. Therefore, changes in the stimulus violate stimulus specificity and restore habituated responding. The results are also consistent with other theories that attribute extinction to a reduction of stimulus control [e.g., Psychol. Bull. 114 (1993) 80; J. Exp. Psychol.: Anim. Behav. Process. 16 (1990) 235], but considerations such as parsimony and testability favor the habituation hypothesis over these theories.

  4. Quantity language speakers show enhanced subcortical processing.

    PubMed

    Dawson, Caitlin; Aalto, Daniel; Šimko, Juraj; Putkinen, Vesa; Tervaniemi, Mari; Vainio, Martti

    2016-07-01

    The complex auditory brainstem response (cABR) can reflect language-based plasticity in subcortical stages of auditory processing. It is sensitive to differences between language groups as well as stimulus properties, e.g. intensity or frequency. It is also sensitive to the synchronicity of the neural population stimulated by sound, which results in increased amplitude of wave V. Finnish is a full-fledged quantity language, in which word meaning is dependent upon duration of the vowels and consonants. Previous studies have shown that Finnish speakers have enhanced behavioural sound duration discrimination ability and larger cortical mismatch negativity (MMN) to duration change compared to German and French speakers. The next step is to find out whether these enhanced duration discrimination abilities of quantity language speakers originate at the brainstem level. Since German has a complementary quantity contrast which restricts the possible patterns of short and long vowels and consonants, the current experiment compared cABR between nonmusician Finnish and German native speakers using seven short complex stimuli. Finnish speakers had a larger cABR peak amplitude than German speakers, while the peak onset latency was only affected by stimulus intensity and spectral band. The results suggest that early cABR responses are better synchronised for Finns, which could underpin the enhanced duration sensitivity of quantity language speakers. PMID:27297179

  5. Quantity language speakers show enhanced subcortical processing.

    PubMed

    Dawson, Caitlin; Aalto, Daniel; Šimko, Juraj; Putkinen, Vesa; Tervaniemi, Mari; Vainio, Martti

    2016-07-01

    The complex auditory brainstem response (cABR) can reflect language-based plasticity in subcortical stages of auditory processing. It is sensitive to differences between language groups as well as stimulus properties, e.g. intensity or frequency. It is also sensitive to the synchronicity of the neural population stimulated by sound, which results in increased amplitude of wave V. Finnish is a full-fledged quantity language, in which word meaning is dependent upon duration of the vowels and consonants. Previous studies have shown that Finnish speakers have enhanced behavioural sound duration discrimination ability and larger cortical mismatch negativity (MMN) to duration change compared to German and French speakers. The next step is to find out whether these enhanced duration discrimination abilities of quantity language speakers originate at the brainstem level. Since German has a complementary quantity contrast which restricts the possible patterns of short and long vowels and consonants, the current experiment compared cABR between nonmusician Finnish and German native speakers using seven short complex stimuli. Finnish speakers had a larger cABR peak amplitude than German speakers, while the peak onset latency was only affected by stimulus intensity and spectral band. The results suggest that early cABR responses are better synchronised for Finns, which could underpin the enhanced duration sensitivity of quantity language speakers.

  6. A Proposed Instructional Theory for Integer Addition and Subtraction

    ERIC Educational Resources Information Center

    Stephan, Michelle; Akyuz, Didem

    2012-01-01

    This article presents the results of a 7th-grade classroom teaching experiment that supported students' understanding of integer addition and subtraction. The experiment was conducted to test and revise a hypothetical learning trajectory so as to propose a potential instructional theory for integer addition and subtraction. The instructional…

  7. Grassland biodiversity bounces back from long-term nitrogen addition.

    PubMed

    Storkey, J; Macdonald, A J; Poulton, P R; Scott, T; Köhler, I H; Schnyder, H; Goulding, K W T; Crawley, M J

    2015-12-17

    The negative effect of increasing atmospheric nitrogen (N) pollution on grassland biodiversity is now incontrovertible. However, the recent introduction of cleaner technologies in the UK has led to reductions in the emissions of nitrogen oxides, with concomitant decreases in N deposition. The degree to which grassland biodiversity can be expected to 'bounce back' in response to these improvements in air quality is uncertain, with a suggestion that long-term chronic N addition may lead to an alternative low biodiversity state. Here we present evidence from the 160-year-old Park Grass Experiment at Rothamsted Research, UK, that shows a positive response of biodiversity to reducing N addition from either atmospheric pollution or fertilizers. The proportion of legumes, species richness and diversity increased across the experiment between 1991 and 2012 as both wet and dry N deposition declined. Plots that stopped receiving inorganic N fertilizer in 1989 recovered much of the diversity that had been lost, especially if limed. There was no evidence that chronic N addition has resulted in an alternative low biodiversity state on the Park Grass plots, except where there has been extreme acidification, although it is likely that the recovery of plant communities has been facilitated by the twice-yearly mowing and removal of biomass. This may also explain why a comparable response of plant communities to reduced N inputs has yet to be observed in the wider landscape.

  8. Grassland biodiversity bounces back from long-term nitrogen addition

    NASA Astrophysics Data System (ADS)

    Storkey, J.; MacDonald, A. J.; Poulton, P. R.; Scott, T.; Köhler, I. H.; Schnyder, H.; Goulding, K. W. T.; Crawley, M. J.

    2015-12-01

    The negative effect of increasing atmospheric nitrogen (N) pollution on grassland biodiversity is now incontrovertible. However, the recent introduction of cleaner technologies in the UK has led to reductions in the emissions of nitrogen oxides, with concomitant decreases in N deposition. The degree to which grassland biodiversity can be expected to ‘bounce back’ in response to these improvements in air quality is uncertain, with a suggestion that long-term chronic N addition may lead to an alternative low biodiversity state. Here we present evidence from the 160-year-old Park Grass Experiment at Rothamsted Research, UK, that shows a positive response of biodiversity to reducing N addition from either atmospheric pollution or fertilizers. The proportion of legumes, species richness and diversity increased across the experiment between 1991 and 2012 as both wet and dry N deposition declined. Plots that stopped receiving inorganic N fertilizer in 1989 recovered much of the diversity that had been lost, especially if limed. There was no evidence that chronic N addition has resulted in an alternative low biodiversity state on the Park Grass plots, except where there has been extreme acidification, although it is likely that the recovery of plant communities has been facilitated by the twice-yearly mowing and removal of biomass. This may also explain why a comparable response of plant communities to reduced N inputs has yet to be observed in the wider landscape.

  9. Software for portable laser light show system

    NASA Astrophysics Data System (ADS)

    Buruchin, Dmitrey J.; Leonov, Alexander F.

    1995-04-01

    Portable laser light show system LS-3500-10M is connected to the parallel port of IBM PC/AT compatible computer. Computer performs output of digital control data describing images. Specially designed control device is used to convert digital data coming from parallel port to the analog signal driving scanner. Capabilities of even cost nothing 286 computer are quite enough for laser graphics control. Technology of scanning used in laser graphics system LS-3500-10M essentially differs from widely spread systems based on galvanometers with mobile core or with mobile magnet. Such devices are based on the same principle of work as electrically driven servo-mechanism. As scanner we use elastic system with hydraulic dampen oscillations and opened loop. For most of applications of laser graphics such system provides satisfactory precision and speed of scanning. LS-3500-10M software gives user ability to create on PC and play his own laser graphics demonstrations. It is possible to render recognizable text and pictures using different styles, 3D and abstract animation. All types of demonstrations can be mixed in slide-show. Time synchronization is supported. Software has the following features: (1) Different types of text output. Built-in text editor for typing and editing of textural information. Different fonts can be used to display text. User can create his own fonts using specially developed font editor. (2) Editor of 3D animation with library of predefined shapes. (3) Abstract animation provided by software routines. (4) Support of different graphics files formats (PCX or DXF). Original algorithm of raster image tracing was implemented. (5) Built-in slide-show editor.

  10. Latest European coelacanth shows Gondwanan affinities.

    PubMed

    Cavin, Lionel; Forey, Peter L; Buffetaut, Eric; Tong, Haiyan

    2005-06-22

    The last European fossil occurrence of a coelacanth is from the Mid-Cretaceous of the English Chalk (Turonian, 90 million years ago). Here, we report the discovery of a coelacanth from Late Cretaceous non-marine rocks in southern France. It consists of a left angular bone showing structures that imply close phylogenetic affinities with some extinct Mawsoniidae. The closest relatives are otherwise known from Cretaceous continental deposits of southern continents and suggest that the dispersal of freshwater organisms from Africa to Europe occurred in the Late Cretaceous.

  11. Asteroid Ida - 6 Views Showing Rotation

    NASA Technical Reports Server (NTRS)

    1994-01-01

    This composite image shows the asteroid 243 Ida as seen from the Galileo spacecraft during its approach on August 28, 1993. The six views were shuttered through the camera's green filter and show Ida's rotation over a period of about 3 hours 18 minutes. The asteroid makes a complete rotation every 4 hours 38 minutes; therefore, this set of images spans about 3/4 of Ida's rotation period and shows most of Ida's surface. By combining the information in these views with that from the highest resolution images returned from the spacecraft in September 1993, the size and shape of this irregular body can now be determined accurately The asteroid appears to be about 58 kilometers (36 miles) long and about 23 kilometers wide, with a very irregular shape and volume of some 16,000 cubic kilometers. The images are arranged in chronological order from a time 3 hours 51 minutes before closest approach (upper left), through upper right, middle left, middle right lower left and lower right (33 minutes before closest approach). The six images show Ida at the same scale throughout. Ida's rotation axis is roughly vertical in these images, and the rotation causes the right-hand end of Ida to move toward the viewer as time progresses. The first image was taken from a range of about 171,000 km (106,000 miles) and provides an image resolution of about 1,700 meters per pixel (the highest resolution achieved for Ida is about 25 meters per pixel). The second, taken 70 minutes later, is from 119,000 kilometers, followed by 102,000 kilometers, 85,000 kilometers, 50,000 kilometers, and 25,000 kilometers. The features on Ida are less sharp in the earlier views because of the greater distances. Prominent in the middle three views is a deep depression across the short axis of the Asteroid. This feature tends to support the idea that Ida may have originally been formed from two or more separate large objects that collided softly and stuck together. Also visible in the lower left view is an

  12. ShowFlow: A practical interface for groundwater modeling

    SciTech Connect

    Tauxe, J.D.

    1990-12-01

    ShowFlow was created to provide a user-friendly, intuitive environment for researchers and students who use computer modeling software. What traditionally has been a workplace available only to those familiar with command-line based computer systems is now within reach of almost anyone interested in the subject of modeling. In the case of this edition of ShowFlow, the user can easily experiment with simulations using the steady state gaussian plume groundwater pollutant transport model SSGPLUME, though ShowFlow can be rewritten to provide a similar interface for any computer model. Included in this thesis is all the source code for both the ShowFlow application for Microsoft{reg sign} Windows{trademark} and the SSGPLUME model, a User's Guide, and a Developer's Guide for converting ShowFlow to run other model programs. 18 refs., 13 figs.

  13. Stirling machine operating experience

    NASA Technical Reports Server (NTRS)

    Ross, Brad; Dudenhoefer, James E.

    1991-01-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that Stirling machines are capable of reliable and lengthy lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and were not expected to operate for any lengthy period of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered.

  14. Trematode hemoglobins show exceptionally high oxygen affinity.

    PubMed

    Kiger, L; Rashid, A K; Griffon, N; Haque, M; Moens, L; Gibson, Q H; Poyart, C; Marden, M C

    1998-08-01

    Ligand binding studies were made with hemoglobin (Hb) isolated from trematode species Gastrothylax crumenifer (Gc), Paramphistomum epiclitum (Pe), Explanatum explanatum (Ee), parasitic worms of water buffalo Bubalus bubalis, and Isoparorchis hypselobagri (Ih) parasitic in the catfish Wallago attu. The kinetics of oxygen and carbon monoxide binding show very fast association rates. Whereas oxygen can be displaced on a millisecond time scale from human Hb at 25 degrees C, the dissociation of oxygen from trematode Hb may require a few seconds to over 20 s (for Hb Pe). Carbon monoxide dissociation is faster, however, than for other monomeric hemoglobins or myoglobins. Trematode hemoglobins also show a reduced rate of autoxidation; the oxy form is not readily oxidized by potassium ferricyanide, indicating that only the deoxy form reacts rapidly with this oxidizing agent. Unlike most vertebrate Hbs, the trematodes have a tyrosine residue at position E7 instead of the usual distal histidine. As for Hb Ascaris, which also displays a high oxygen affinity, the trematodes have a tyrosine in position B10; two H-bonds to the oxygen molecule are thought to be responsible for the very high oxygen affinity. The trematode hemoglobins display a combination of high association rates and very low dissociation rates, resulting in some of the highest oxygen affinities ever observed.

  15. Show Me the Invisible: Visualizing Hidden Content.

    PubMed

    Geymayer, Thomas; Steinberger, Markus; Lex, Alexander; Streit, Marc; Schmalstieg, Dieter

    2014-01-01

    Content on computer screens is often inaccessible to users because it is hidden, e.g., occluded by other windows, outside the viewport, or overlooked. In search tasks, the efficient retrieval of sought content is important. Current software, however, only provides limited support to visualize hidden occurrences and rarely supports search synchronization crossing application boundaries. To remedy this situation, we introduce two novel visualization methods to guide users to hidden content. Our first method generates awareness for occluded or out-of-viewport content using see-through visualization. For content that is either outside the screen's viewport or for data sources not opened at all, our second method shows off-screen indicators and an on-demand smart preview. To reduce the chances of overlooking content, we use visual links, i.e., visible edges, to connect the visible content or the visible representations of the hidden content. We show the validity of our methods in a user study, which demonstrates that our technique enables a faster localization of hidden content compared to traditional search functionality and thereby assists users in information retrieval tasks. PMID:25325078

  16. Sterols from Mytilidae show anti-aging and neuroprotective effects via anti-oxidative activity.

    PubMed

    Sun, Yujuan; Lin, Yanfei; Cao, Xueli; Xiang, Lan; Qi, Jianhua

    2014-11-25

    For screening anti-aging samples from marine natural products, K6001 yeast strain was employed as a bioassay system. The active mussel extract was separated to give an active sterol fraction (SF). SF was further purified, and four sterol compounds were obtained. Their structures were determined to be cholesterol (CHOL), brassicasterol, crinosterol, and 24-methylenecholesterol. All compounds showed similar anti-aging activity. To understand the action mechanism involved, anti-oxidative experiments, reactive oxygen species (ROS) assays, and malondialdehyde (MDA) tests were performed on the most abundant compound, CHOL. Results indicated that treatment with CHOL increases the survival rate of yeast under oxidative stress and decreases ROS and MDA levels. In addition, mutations of uth1, skn7, sod1, and sod2, which feature a K6001 background, were employed and the lifespans of the mutations were not affected by CHOL. These results demonstrate that CHOL exerts anti-aging effects via anti-oxidative stress. Based on the connection between neuroprotection and anti-aging, neuroprotective experiments were performed in PC12 cells. Paraquat was used to induce oxidative stress and the results showed that the CHOL and SF protect the PC12 cells from the injury induced by paraquat. In addition, these substance exhibited nerve growth factor (NGF) mimic activities again confirmed their neuroprotective function.

  17. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  18. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  19. Sugar-dependent rats show enhanced intake of unsweetened ethanol.

    PubMed

    Avena, Nicole M; Carrillo, Carmen A; Needham, Lance; Leibowitz, Sarah F; Hoebel, Bartley G

    2004-01-01

    Rats show signs of dependence on sugar when it is available intermittently, including bingeing, withdrawal, and cross-sensitization with amphetamine. In the current study, we sought to determine whether sugar-dependent rats would show increased intake of unsweetened ethanol and, conversely, whether intermittent access to ethanol would augment sugar consumption. In Experiment 1, with intermittent versus ad libitum access to ethanol, Sprague-Dawley rats were given escalating concentrations of ethanol (1%, 2%, 4%, 7%, and 9%) over the course of 20 days. Rats in the intermittent ethanol access group, with 12-h daily access, consumed more 4%, 7%, and 9% ethanol during the first hour of access, and more 9% ethanol daily, than did rats in the ad libitum ethanol access group. In Experiment 2, with ethanol as a gateway to sugar intake, the rats from Experiment 1 were switched to 10% sucrose with 12-h daily access for 1 week. Rats in the intermittent ethanol access group consumed significantly more sugar than was consumed by rats in a control group with no prior ethanol experience. In Experiment 3, with sugar as a gateway to ethanol to determine whether sugar dependence leads to increased ethanol intake, four groups were maintained for 21 days according to the following designations: intermittent access to sugar and chow, ad libitum access to sugar and chow, intermittent access to chow, or ad libitum access to chow. Four days later, all groups were switched to intermittent ethanol access, as described in Experiment 1. The group with intermittent access to sugar and chow consumed the most 9% ethanol, supporting the suggestion that sugar dependence alters a rat's proclivity to drink ethanol. These results may relate to the co-morbidity between binge-eating disorders and alcohol intake and the tendency of people abstaining from alcohol to consume excessive amounts of sugar. In conclusion, bingeing on either ethanol or sugar fosters intake of the other.

  20. Electricity show and related educational programming. Final report

    SciTech Connect

    1997-03-19

    The on-site version of Balance of Power reached a total audience of 21,331 between November 10, 1994 and January 31, 1996; in addition, the Physics on Wheels van offered exhibits and programs to an additional 30,000 students in the 1995-1996 school year. The program provided a groundbreaking new approach to informal science education, combining a dynamic demonstration with an intensely interactive game show. Between the on-site programming and the Physics on Wheels van programs, 51,331 students were impacted by the activities, exhibits and energy-conservation message of Balance of Power.

  1. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  2. Color Voyager 2 Image Showing Crescent Uranus

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This image shows a crescent Uranus, a view that Earthlings never witnessed until Voyager 2 flew near and then beyond Uranus on January 24, 1986. This planet's natural blue-green color is due to the absorption of redder wavelengths in the atmosphere by traces of methane gas. Uranus' diameter is 32,500 miles, a little over four times that of Earth. The hazy blue-green atmosphere probably extends to a depth of around 5,400 miles, where it rests above what is believed to be an icy or liquid mixture (an 'ocean') of water, ammonia, methane, and other volatiles, which in turn surrounds a rocky core perhaps a little smaller than Earth.

  3. Star Shows It Has The Right Stuff

    NASA Astrophysics Data System (ADS)

    2004-01-01

    Astronomers have used an observation by NASA's Chandra X-ray Observatory to make the best case yet that a star can be engulfed by its companion star and survive. This discovery will help astronomers better understand how closely coupled stars, and perhaps even stars and planets, evolve when one of the stars expands enormously in its red giant phase. The binary star system known as V471 Tauri comprises a white dwarf star (the primary) in a close orbit -- one thirtieth of the distance between Mercury and the Sun -- with a normal Sun-like star (the secondary). Chandra's data showed that the hot upper atmosphere of the secondary star has a deficit of carbon atoms relative to nitrogen atoms. "This deficit of carbon atoms is the first clear observational evidence that the normal star was engulfed by its companion in the past," according to Jeremy Drake of the Smithsonian Astrophysical Observatory in Cambridge, MA, who coauthored an article on V471 in The Astrophysical Journal Letters with Marek Sarna of the N. Copernicus Astronomical Center in Poland. The white dwarf star was once a star several times as massive as the Sun. Nuclear fusion reactions in the core of such a star convert carbon into nitrogen over a period of about a billion years. When the fuel in the core of the star is exhausted, the core collapses, triggering more energetic nuclear reactions that cause the star to expand and transform into a red giant before eventually collapsing to become a white dwarf. The carbon-poor material in the core of the red giant is mixed with outer part of the star, so its atmosphere shows a deficit of carbon, as compared with Sun-like stars. The X-ray spectra of a red giant star (top panel) and a Sun-like star (bottom panel) show the large difference in the peaks due to carbon atoms in the two stars. Theoretical calculations indicate that a red giant in a binary system can completely envelop its companion star and dramatically affect its evolution. During this common envelope

  4. New AIDS estimates show demographic changes.

    PubMed

    1995-06-01

    According to the Centers for Disease Control and Prevention (CDC), the HIV epidemic's rate of increase has slowed to about three percent per year, with the incidence of AIDS cases estimated to have decreased in the West. The latest epidemic figures, reported through 1994 in the CDC's HIV/AIDS Surveillance Report, puts the total of reported AIDS cases in the United States at 441,528. The implementation of the new AIDS definition in 1993 has distorted surveillance trends--six out of ten AIDS cases are now reported using the new CD4 criterion instead of the pre-1993 case definitions. An unpublished analysis of the epidemic shows a shift toward fewer gay men, more injection drug users, and more women becoming infected. However, the CDC contends that more heterosexuals are being infected and more racial and ethnic minorities are being infected. PMID:11362433

  5. Mesenchymal stem cells show radioresistance in vivo

    PubMed Central

    Singh, Sarvpreet; Kloss, Frank R; Brunauer, Regina; Schimke, Magdalena; Jamnig, Angelika; Greiderer-Kleinlercher, Brigitte; Klima, Günter; Rentenberger, Julia; Auberger, Thomas; Hächl, Oliver; Rasse, Michael; Gassner, Robert; Lepperdinger, Günter

    2012-01-01

    Abstract Irradiation impacts on the viability and differentiation capacity of tissue-borne mesenchymal stem cells (MSC), which play a pivotal role in bone regeneration. As a consequence of radiotherapy, bones may develop osteoradionecrosis. When irradiating human bone-derived MSC in vitro with increasing doses, the cells’ self-renewal capabilities were greatly reduced. Mitotically stalled cells were still capable of differentiating into osteoblasts and pre-adipocytes. As a large animal model comparable to the clinical situation, pig mandibles were subjected to fractionized radiation of 2 χ 9 Gy within 1 week. This treatment mimics that of a standardized clinical treatment regimen of head and neck cancer patients irradiated 30 χ 2 Gy. In the pig model, fractures which had been irradiated, showed delayed osseous healing. When isolating MSC at different time points post-irradiation, no significant changes regarding proliferation capacity and osteogenic differentiation potential became apparent. Therefore, pig mandibles were irradiated with a single dose of either 9 or 18 Gy in vivo, and MSC were isolated immediately afterwards. No significant differences between the untreated and 9 Gy irradiated bone with respect to proliferation and osteogenic differentiation were unveiled. Yet, cells isolated from 18 Gy irradiated specimens exhibited a reduced osteogenic differentiation capacity, and during the first 2 weeks proliferation rates were greatly diminished. Thereafter, cells recovered and showed normal proliferation behaviour. These findings imply that MSC can effectively cope with irradiation up to high doses in vivo. This finding should thus be implemented in future therapeutic concepts to protect regenerating tissue from radiation consequences. PMID:21762375

  6. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2011-05-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  7. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2010-12-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  8. VLA Shows "Boiling" in Atmosphere of Betelgeuse

    NASA Astrophysics Data System (ADS)

    1998-04-01

    A team of astronomers says that observations with the National Science Foundation's Very Large Array (VLA) radio telescope show that a neighboring bloated star has giant convective plumes propelling gas from its surface (photosphere) up into the star's atmosphere. This new information contradicts long-held ideas that such stellar atmospheres are more uniform, and may resolve questions about how the star's atmosphere attains its enormous size as well as how dust and gas is driven away from the star. Jeremy Lim of the Academia Sinica Institute of Astronomy & Astrophysics in Taiwan; Chris Carilli, Anthony Beasley, and Ralph Marson of the National Radio Astronomy Observatory (NRAO) in Socorro, NM; and Stephen White of the University of Maryland studied the red-supergiant star Betelgeuse, about 430 light-years away in the constellation Orion. They reported their findings in the April 9 issue of the scientific journal Nature. "These radio-telescope images confirm that Betelgeuse -- already more than 600 times larger than our Sun -- has a dense atmosphere that extends to many times larger still than the star itself," said Lim. "The highest-resolution image shows the star's atmosphere to have a remarkably complex structure." "To our surprise," added White, "the images also show that most of the gas in the atmosphere is only about as hot as that on the surface. Previously, all of it was thought to be very much hotter." The astronomers used the VLA to make images of Betelgeuse at a variety of radio frequencies. The series of radio observations measured the temperature of the star's atmosphere at different heights. Previous observations with the Hubble Space Telescope (HST) at ultraviolet wavelengths showed that the star's atmosphere contains very hot gas at about twice the surface temperature. The VLA images showed that there also is lower-temperature gas throughout the atmosphere. This gas is near the surface temperature at low heights and decreases in temperature

  9. Network reconstruction using nonparametric additive ODE models.

    PubMed

    Henderson, James; Michailidis, George

    2014-01-01

    Network representations of biological systems are widespread and reconstructing unknown networks from data is a focal problem for computational biologists. For example, the series of biochemical reactions in a metabolic pathway can be represented as a network, with nodes corresponding to metabolites and edges linking reactants to products. In a different context, regulatory relationships among genes are commonly represented as directed networks with edges pointing from influential genes to their targets. Reconstructing such networks from data is a challenging problem receiving much attention in the literature. There is a particular need for approaches tailored to time-series data and not reliant on direct intervention experiments, as the former are often more readily available. In this paper, we introduce an approach to reconstructing directed networks based on dynamic systems models. Our approach generalizes commonly used ODE models based on linear or nonlinear dynamics by extending the functional class for the functions involved from parametric to nonparametric models. Concomitantly we limit the complexity by imposing an additive structure on the estimated slope functions. Thus the submodel associated with each node is a sum of univariate functions. These univariate component functions form the basis for a novel coupling metric that we define in order to quantify the strength of proposed relationships and hence rank potential edges. We show the utility of the method by reconstructing networks using simulated data from computational models for the glycolytic pathway of Lactocaccus Lactis and a gene network regulating the pluripotency of mouse embryonic stem cells. For purposes of comparison, we also assess reconstruction performance using gene networks from the DREAM challenges. We compare our method to those that similarly rely on dynamic systems models and use the results to attempt to disentangle the distinct roles of linearity, sparsity, and derivative

  10. Network Reconstruction Using Nonparametric Additive ODE Models

    PubMed Central

    Henderson, James; Michailidis, George

    2014-01-01

    Network representations of biological systems are widespread and reconstructing unknown networks from data is a focal problem for computational biologists. For example, the series of biochemical reactions in a metabolic pathway can be represented as a network, with nodes corresponding to metabolites and edges linking reactants to products. In a different context, regulatory relationships among genes are commonly represented as directed networks with edges pointing from influential genes to their targets. Reconstructing such networks from data is a challenging problem receiving much attention in the literature. There is a particular need for approaches tailored to time-series data and not reliant on direct intervention experiments, as the former are often more readily available. In this paper, we introduce an approach to reconstructing directed networks based on dynamic systems models. Our approach generalizes commonly used ODE models based on linear or nonlinear dynamics by extending the functional class for the functions involved from parametric to nonparametric models. Concomitantly we limit the complexity by imposing an additive structure on the estimated slope functions. Thus the submodel associated with each node is a sum of univariate functions. These univariate component functions form the basis for a novel coupling metric that we define in order to quantify the strength of proposed relationships and hence rank potential edges. We show the utility of the method by reconstructing networks using simulated data from computational models for the glycolytic pathway of Lactocaccus Lactis and a gene network regulating the pluripotency of mouse embryonic stem cells. For purposes of comparison, we also assess reconstruction performance using gene networks from the DREAM challenges. We compare our method to those that similarly rely on dynamic systems models and use the results to attempt to disentangle the distinct roles of linearity, sparsity, and derivative

  11. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  12. NASA GIBS Use in Live Planetarium Shows

    NASA Astrophysics Data System (ADS)

    Emmart, C. B.

    2015-12-01

    The American Museum of Natural History's Hayden Planetarium was rebuilt in year 2000 as an immersive theater for scientific data visualization to show the universe in context to our planet. Specific astrophysical movie productions provide the main daily programming, but interactive control software, developed at AMNH allows immersive presentation within a data aggregation of astronomical catalogs called the Digital Universe 3D Atlas. Since 2006, WMS globe browsing capabilities have been built into a software development collaboration with Sweden's Linkoping University (LiU). The resulting Uniview software, now a product of the company SCISS, is operated by about fifty planetariums around that world with ability to network amongst the sites for global presentations. Public presentation of NASA GIBS has allowed authoritative narratives to be presented within the range of data available in context to other sources such as Science on a Sphere, NASA Earth Observatory and Google Earth KML resources. Specifically, the NOAA supported World Views Network conducted a series of presentations across the US that focused on local ecological issues that could then be expanded in the course of presentation to national and global scales of examination. NASA support of for GIBS resources in an easy access multi scale streaming format like WMS has tremendously enabled particularly facile presentations of global monitoring like never before. Global networking of theaters for distributed presentations broadens out the potential for impact of this medium. Archiving and refinement of these presentations has already begun to inform new types of documentary productions that examine pertinent, global interdependency topics.

  13. Hemispatial Neglect Shows That "Before" Is "Left".

    PubMed

    Bonato, Mario; Saj, Arnaud; Vuilleumier, Patrik

    2016-01-01

    Recent research has led to the hypothesis that events which unfold in time might be spatially represented in a left-to-right fashion, resembling writing direction. Here we studied fourteen right-hemisphere damaged patients, with or without neglect, a disorder of spatial awareness affecting contralesional (here left) space processing and representation. We reasoned that if the processing of time-ordered events is spatial in nature, it should be impaired in the presence of neglect and spared in its absence. Patients categorized events of a story as occurring before or after a central event, which acted as a temporal reference. An asymmetric distance effect emerged in neglect patients, with slower responses to events that took place before the temporal reference. The event occurring immediately before the reference elicited particularly slow responses, closely mirroring the pattern found in neglect patients performing numerical comparison tasks. Moreover, the first item elicited significantly slower responses than the last one, suggesting a preference for a left-to-right scanning/representation of events in time. Patients without neglect showed a regular and symmetric distance effect. These findings further suggest that the representation of events order is spatial in nature and provide compelling evidence that ordinality is similarly represented within temporal and numerical domains. PMID:27313902

  14. NTZIP antisense plants show reduced chlorophyll levels.

    PubMed

    Liu, Ning; Yang, Yu-Tao; Liu, Han-Hua; Yang, Guo-Dong; Zhang, Nai-Hua; Zheng, Cheng Chao

    2004-04-01

    We have isolated and characterized a new photosynthetic tissue-specific gene NTZIP (Nicotiana tabacum leucine zipper) from tobacco (N. tabacum). Its deduced amino acid sequence has two highly conserved regions, leucine zipper and [EX(n)DEXRH](2) motifs, which are related to the gene's biochemical functions. NTZIP was expressed in leaves and stems, but was not detected in roots or flowers, suggesting that its physiological functions might be associated with photosynthesis. Northern blot analysis showed that NTZIP mRNA accumulation was induced by light signals, increased greatly under low temperatures and was repressed by strong light illumination. Furthermore, a number of homologs of NTZIP were isolated from cucumber (Cucumis sativus), rape (Brassica napus), clover (Trifolium repens), willow (Salix babylonica), rosebush (Rusa dovurica), wheat (Triticum aestivum) and spinach (Spinacia oleracea), proving the ubiquitous existence of the NTZIP-like genes in higher plants. Transgenic tobaccos constitutively expressing antisense RNA to NTZIP displayed chlorosis and a lack of ability to turn green even under normal growth conditions. The chlorophyll deficiency was further confirmed by chlorophyll content determination and gas exchange analysis. Based on these observations, we propose that NTZIP may be involved in chlorophyll biosynthesis, and might define a novel family of evolutionarily conserved proteins with its homologs in other plant species.

  15. Oxidation and sulfidation resistant alloys with silicon additions

    SciTech Connect

    Dunning, John S.; Alman, David E.; Poston, J.A., Jr.; Siriwardane, R.

    2003-01-01

    The Albany Research Center (ARC) has considerable experience in developing lean chromium, austenitic stainless steels with improved high temperature oxidation resistance. Using basic alloy design principles, a baseline composition of Fe-16Cr-16Ni-2Mn-1Mo alloys with Si and Al addition at a maximum of 5 weight percent was selected for potential application at temperatures above 700ºC for supercritical and ultra-supercritical power plant application. The alloys were fully austenitic. Cyclic oxidation tests in air for 1000 hours were carried out on alloys with Si only or combined Si and Al additions in the temperature range 700ºC to 800ºC. Oxidation resistances of alloys with Si only additions were outstanding, particularly at 800ºC (i.e., these alloys possessed weight gains 4 times less than a standard type-304 alloy). In addition, Si alloys pre-oxidized at 800ºC, showed a zero weight gain in subsequent testing for 1000 hours at 700ºC. Similar improvements were observed for Si only alloy after H2S exposure at 700ºC compared with type 304 stainless steel. SEM and ESCA analysis of the oxide films and base material at the oxide/base metal interface were conducted to study potential rate controlling mechanisms at ARC. Depth profile analysis and element concentration profiles (argon ion etching/x-ray photoelectron spectroscopy) were conducted on oxidized specimens and base material at the National Energy Technology Laboratory.

  16. 17. VIEW OF NORTH AND WEST ELEVATIONS, SHOWING THE MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. VIEW OF NORTH AND WEST ELEVATIONS, SHOWING THE MILL IN RELATION TO ITS SOURCE OF WATER POWER, THE OHIO AND ERIE CANAL. LOCK NO. 37 IS JUST OUT OF VIEW IN THE FOREGROUND. THE SHED-ROOFED CINDER BLOCK ADDITION WAS ADDED IN 1948. Photographer: Louise Taft Cawood, July 1986 - Alexander's Grist Mill, Lock 37 on Ohio & Erie Canal, South of Cleveland, Valley View, Cuyahoga County, OH

  17. SPERTI plot plan, showing reactor and control areas after 1956 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I plot plan, showing reactor and control areas after 1956 addition to PER-601. Includes reactor-area buildings PER-605, -606, and -607; Terminal Building (PER-604), and control-area buildings PER-601, -602, -603 along with associated parking areas and fencing. Vicinity map shows relationship of SPERT-I to SPERT-II, SPERT-III, central facilities area (at west end of E. Portland Avenue) and Highways 20 and 26. Idaho Operations Office PER-103-IDO-1. Date: December 1955. INEEL index no. 760-0103-396-109112 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  18. Teebi hypertelorism syndrome: additional cases.

    PubMed

    Machado-Paula, Ligiane Alves; Guion-Almeida, Maria Leine

    2003-03-01

    We report on two unrelated Brazilian boys who have craniofacial and digital anomalies resembling those reported with Teebi hypertelorism syndrome. Additional features such as cleft lip and palate, large uvula, atypical chin and abnormal scapulae were observed.

  19. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  20. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  1. Revisiting Additivity Violation of Quantum Channels

    NASA Astrophysics Data System (ADS)

    Fukuda, Motohisa

    2014-12-01

    We prove additivity violation of minimum output entropy of quantum channels by straightforward application of -net argument and Lévy's lemma. The additivity conjecture was disproved initially by Hastings. Later, a proof via asymptotic geometric analysis was presented by Aubrun, Szarek and Werner, which uses Dudley's bound on Gaussian process (or Dvoretzky's theorem with Schechtman's improvement). In this paper, we develop another proof along Dvoretzky's theorem in Milman's view, showing additivity violation in broader regimes than the existing proofs. Importantly,Dvoretzky's theorem works well with norms to give strong statements, but these techniques can be extended to functions which have norm-like structures-positive homogeneity and triangle inequality. Then, a connection between Hastings' method and ours is also discussed. In addition, we make some comments on relations between regularized minimum output entropy and classical capacity of quantum channels.

  2. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  3. Extension of the standard addition method by blank addition.

    PubMed

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set.

  4. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  5. Extension of the standard addition method by blank addition

    PubMed Central

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set. PMID:26844210

  6. Some experiments on autorotation of an airfoil

    NASA Technical Reports Server (NTRS)

    Ober, Shatswell

    1929-01-01

    These experiments show that the rate of auto rotation of a monoplane airfoil is reduced by sweepback, ceasing entirely when the sweepback is 30 degrees. In addition a very serious increase in rate and range of auto rotation with yaw is shown.

  7. Latest Results from the COMPASS Experiment

    NASA Astrophysics Data System (ADS)

    Stolarski, M.

    2016-02-01

    In this paper the latest results from the COMPASS experiment are presented. We show results from longitudinally and transversely polarised targets off which high energy muons are scattered. In addition the future plans of COMPASS as well as results of the beam test runs are also presented.

  8. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  9. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  10. Clinical effects of sulphite additives.

    PubMed

    Vally, H; Misso, N L A; Madan, V

    2009-11-01

    Sulphites are widely used as preservative and antioxidant additives in the food and pharmaceutical industries. Topical, oral or parenteral exposure to sulphites has been reported to induce a range of adverse clinical effects in sensitive individuals, ranging from dermatitis, urticaria, flushing, hypotension, abdominal pain and diarrhoea to life-threatening anaphylactic and asthmatic reactions. Exposure to the sulphites arises mainly from the consumption of foods and drinks that contain these additives; however, exposure may also occur through the use of pharmaceutical products, as well as in occupational settings. While contact sensitivity to sulphite additives in topical medications is increasingly being recognized, skin reactions also occur after ingestion of or parenteral exposure to sulphites. Most studies report a 3-10% prevalence of sulphite sensitivity among asthmatic subjects following ingestion of these additives. However, the severity of these reactions varies, and steroid-dependent asthmatics, those with marked airway hyperresponsiveness, and children with chronic asthma, appear to be at greater risk. In addition to episodic and acute symptoms, sulphites may also contribute to chronic skin and respiratory symptoms. To date, the mechanisms underlying sulphite sensitivity remain unclear, although a number of potential mechanisms have been proposed. Physicians should be aware of the range of clinical manifestations of sulphite sensitivity, as well as the potential sources of exposure. Minor modifications to diet or behaviour lead to excellent clinical outcomes for sulphite-sensitive individuals.

  11. Backbone Additivity in the Transfer Model of Protein Solvation

    SciTech Connect

    Hu, Char Y.; Kokubo, Hironori; Lynch, Gillian C.; Bolen, D Wayne; Pettitt, Bernard M.

    2010-05-01

    The transfer model implying additivity of the peptide backbone free energy of transfer is computationally tested. Molecular dynamics simulations are used to determine the extent of change in transfer free energy (ΔGtr) with increase in chain length of oligoglycine with capped end groups. Solvation free energies of oligoglycine models of varying lengths in pure water and in the osmolyte solutions, 2M urea and 2M trimethylamine N-oxide (TMAO), were calculated from simulations of all atom models, and ΔGtr values for peptide backbone transfer from water to the osmolyte solutions were determined. The results show that the transfer free energies change linearly with increasing chain length, demonstrating the principle of additivity, and provide values in reasonable agreement with experiment. The peptide backbone transfer free energy contributions arise from van der Waals interactions in the case of transfer to urea, but from electrostatics on transfer to TMAO solution. The simulations used here allow for the calculation of the solvation and transfer free energy of longer oligoglycine models to be evaluated than is currently possible through experiment. The peptide backbone unit computed transfer free energy of –54 cal/mol/Mcompares quite favorably with –43 cal/mol/M determined experimentally.

  12. Postmarketing surveillance of food additives.

    PubMed

    Butchko, H H; Tschanz, C; Kotsonis, F N

    1994-08-01

    Postmarketing surveillance of consumption and of anecdotal reports of adverse health effects has been recognized by a number of regulatory authorities as a potentially useful method to provide further assurance of the safety of new food additives. Surveillance of consumption is used to estimate more reliably actual consumption levels relative to the acceptable daily intake of a food additive. Surveillance of anecdotal reports of adverse health effects is used to determine the presence of infrequent idiosyncratic responses that may not be predictable from premarket evaluations. The high-intensity sweetner, aspartame, is a food additive that has been the subject of extensive evaluation during the postmarketing period and is thus used as an example to discuss postmarketing surveillance.

  13. A Simple Experiment to Show Photodynamic Inactivation of Bacteria on Surfaces

    ERIC Educational Resources Information Center

    Caminos, Daniel A.; Durantini, Edgardo N.

    2007-01-01

    New suitable approaches were investigated to visualize the photodynamic inactivation (PDI) of bacteria immobilized on agar surfaces. The PDI capacities of a cationic photosensitizer (5,10,15,20-tetra(4-N,N,N-trimethylammoniumphenyl)porphyrin) and an anionic photosensitizer (5,10,15,20-tetra(4-sulfonatophenyl)porphyrin) were analyzed on a typical…

  14. Directing Diplomacy: Creating the Best Experience for Everyone in the Show.

    ERIC Educational Resources Information Center

    Mulcahy, Lisa

    2003-01-01

    Discusses the subtle psychological strategies good directors know how to employ with actors. Contends that if a director demonstrates a diplomatic attitude toward every student involved in a production, a perfect working atmosphere is created. Explores diplomacy basics; first impressions; rehearsal problems; personality issues; and talking points.…

  15. Intolerance to food additives - does it exist?

    PubMed

    Turner, Paul J; Kemp, Andrew S

    2012-02-01

    'Food intolerance' is often confused with a range of adverse symptoms which may be coincidental to ingestion of food. 'Food intolerance' is defined as a reaction in which symptoms must be objectively reproducible and not known to involve an immunological mechanism. A more precise term is non-allergic food hypersensitivity, which contrasts with food allergies which are due to an immunological mechanism. Some children will experience food reactions to food additives. Reported symptoms range from urticaria/angioedema to hyperactive behaviours. While parents/carers report that over one fifth of children experience of food reaction, only 1 in 20 of these are confirmed to have a non-allergic food hypersensitivity on testing.

  16. Literature or Experience?

    ERIC Educational Resources Information Center

    Robinson, Dennis

    1978-01-01

    Shows that the need to choose between literature-centered or experience-centered English instruction is a delusion, because instruction in literature also adds to the child's experience of language. (RL)

  17. Chemistry for Kids: A Unique Demonstration Show for the Elementary School Classroom.

    ERIC Educational Resources Information Center

    Waterman, Edward L.; Bilsing, Larry M.

    1983-01-01

    Discusses development and presentation of a chemical demonstration show for grades 1-6 students. Includes major concepts presented and experiments used in the hour-long show. Concepts/experiments focus on the show's theme: the nature of chemical change. Safety factors involved when conducting demonstrations with children are addressed. (JN)

  18. Lubricating additive for drilling muds

    SciTech Connect

    Gutierrez, A.; Brois, S. J.; Brownawell, D. W.; Walker, T. O.

    1985-01-01

    Aqueous drilling fluids containing a minor amount of an additive composition featuring oxazolines of C/sub 1/-C/sub 30/ alkylthioglycolic acid. Such fluids are especially useful where reduced torque drilling fluids are needed. Another embodiment of this invention relates to a method of drilling utilizing the above-described fluids.

  19. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  20. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  1. Out of bounds additive manufacturing

    DOE PAGES

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  2. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  3. Additional Financial Resources for Education.

    ERIC Educational Resources Information Center

    Hubbard, Ben C.

    This paper discusses the continuing need for additional educational funds and suggests that the only way to gain these funds is through concerted and persistent political efforts by supporters of education at both the federal and state levels. The author first points out that for many reasons declining enrollment may not decrease operating costs…

  4. DIY identity kit: the Great American Lesbian Art Show.

    PubMed

    Thompson, Margo Hobbs

    2010-01-01

    The Great American Lesbian Art Show, which opened at the Woman's Building in Los Angeles in May 1980, was conceived to increase visibility for lesbian artists, and to forge bonds among lesbians across the United States. It comprised a curated Invitational of ten artists and scores of regional GALAS events mounted simultaneously by women from Boston to Honolulu. The art on view, documented in a slide archive, staged a critique of contemporary gender norms. Participating artists represented lesbian identities that claimed universality while they reflected the artists' particularized experience of woman-identification and sexual desire. PMID:20408014

  5. Cerebellar subjects show impaired adaptation of anticipatory EMG during catching.

    PubMed

    Lang, C E; Bastian, A J

    1999-11-01

    We evaluated the role of the cerebellum in adapting anticipatory muscle activity during a multijointed catching task. Individuals with and without cerebellar damage caught a series of balls of different weights dropped from above. In Experiment 1 (light-heavy-light), each subject was required to catch light balls (baseline phase), heavy balls (adaptation phase), and then light balls again (postadaptation phase). Subjects were not told when the balls would be switched, and they were required to keep their hand within a vertical spatial "window" during the catch. During the series of trials, we measured three-dimensional (3-D) position and electromyogram (EMG) from the catching arm. We modeled the adaptation process using an exponential decay function; this model allowed us to dissociate adaptation from performance variability. Results from the position data show that cerebellar subjects did not adapt or adapted very slowly to the changed ball weight when compared with the control subjects. The cerebellar group required an average of 30.9 +/- 8.7 trials (mean +/- SE) to progress approximately two-thirds of the way through the adaptation compared with 1.7 +/- 0.2 trials for the control group. Only control subjects showed a negative aftereffect indicating storage of the adaptation. No difference in performance variability existed between the two groups. EMG data show that control subjects increased their anticipatory muscle activity in the flexor muscles of the arm to control the momentum of the ball at impact. Cerebellar subjects were unable to differentially increase the anticipatory muscle activity across three joints to perform the task successfully. In Experiment 2 (heavy-light-heavy), we tested to see whether the rate of adaptation changed when adapting to a light ball versus a heavy ball. Subjects caught the heavy balls (baseline phase), the light balls (adaptation phase), and then heavy balls again (postadaptation phase). Comparison of rates of adaptation

  6. Asphalt and asphalt additives. Transportation research record

    SciTech Connect

    Not Available

    1992-01-01

    Contents: use of asphalt emulsions for in-place recycling: oregon experience; gap-graded cold asphalt concrete: benefits of polymer-modified asphalt cement and fibers; cold in-place recycling for rehabilitation and widening of low-volume flexible pavements in indiana; in situ cold recycling of bituminous pavements with polymer-modified high float emulsions; evaluation of new generation of antistripping additives; correlation between performance-related characteristics of asphalt cement and its physicochemical parameters using corbett's fractions and hpgc; reaction rates and hardening susceptibilities as determined from pressure oxygen vessel aging of asphalts; evaluation of aging characteristics of asphalts by using tfot and rtfot at different temperature levels; summary of asphalt additive performance at selected sites; relating asphalt absorption to properties of asphalt cement and aggregate; study of the effectiveness of styrene-butadiene rubber latex in hot mix asphalt mixes; stability of straight and polymer-modified asphalts.

  7. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  8. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  9. Credit PSR. This view shows the west and north facades ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Credit PSR. This view shows the west and north facades of the storage facility as seen when approaching from Circle Drive, looking east (92°). The metal shed at right was the original structure; the second shed is a later addition. All structures are metal frame covered with metal cladding, grounding them electrically and rendering them fireproof. The entire facility was rated for a maximum of 100,000 pounds (45,450 Kg) of class 1.3 materials, and four personnel - Jet Propulsion Laboratory Edwards Facility, Solid Oxidizer Storage, Edwards Air Force Base, Boron, Kern County, CA

  10. Photographic copy of photograph, aerial view looking north and showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of photograph, aerial view looking north and showing Test Stand 'A' (at bottom), Test Stand 'B' (upper right), and a portion of Test Stand 'C' (top of view). Compare HAER CA-163-1 and 2 and note addition of liquid nitrogen storage tank (Building 4262/E-63) to west of Test Stand 'C' as well as various ancillary facilities located behind earth barriers near Test Stand 'C.' (JPL negative no. 384-3006-A, 12 December 1961) - Jet Propulsion Laboratory Edwards Facility, Edwards Air Force Base, Boron, Kern County, CA

  11. 5. Photographic copy of engineering drawing showing plans, elevation and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of engineering drawing showing plans, elevation and section of Deluge Water System, including reservior (4316), Pump House (4317), and water tower. Job No. Muroc A(5-ll), Military Construction, San Bernardino-Mojave Area, San Bernardino, California: Muroc Bombing Range, Muroc Lake, California.; Additional Facilities for Materiel Center Flight Test Base, Water Supply System, Plans and Sections, Sheet 5 of 10, May 1943. Records on file at AFFTC/CE-CECC-B (Design/Construction Flight/RPMC), Edwards AFB, California. - Edwards Air Force Base, North Base, Deluge Water Pumping Station, Near Second & D Streets, Boron, Kern County, CA

  12. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  13. Additive-free digital microfluidics.

    PubMed

    Freire, Sergio L S; Tanner, Brendan

    2013-07-16

    Digital microfluidics, a technique for manipulation of droplets, is becoming increasingly important for the development of miniaturized platforms for laboratory processes. Despite the enthusiasm, droplet motion is frequently hindered by the desorption of proteins or other analytes to surfaces. Current approaches to minimize this unwanted surface fouling involve the addition of extra species to the droplet or its surroundings, which might be problematic depending on the droplet content. Here, a new strategy is introduced to move droplets containing cells and other analytes on solid substrates, without extra moieties; in particular, droplets with bovine serum albumin could be moved at a concentration 2000 times higher than previously reported (without additives). This capability is achieved by using a soot-based superamphiphobic surface combined with a new device geometry, which favors droplet rolling. Contrasting with electrowetting, wetting forces are not required for droplet motion.

  14. Additive concentrates for distillate fuels

    SciTech Connect

    Rossi, A.; Lewtas, K.

    1985-08-27

    An additive concentrate for incorporation into wax containing petroleum fuel oil compositions to improve low temperature flow properties comprising an oil solution containing: 3% to 90 wt. % of a C30-C300 oil-soluble nitrogen compound wax crystal growth inhibitor having at least one straight C8-C40 alkyl chain and partial esters, and at least one mole per mole of an organic acid capable of hydrogen bonding to improve the solubility in the oil.

  15. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  16. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  17. Does finger sense predict addition performance?

    PubMed

    Newman, Sharlene D

    2016-05-01

    The impact of fingers on numerical and mathematical cognition has received a great deal of attention recently. However, the precise role that fingers play in numerical cognition is unknown. The current study explores the relationship between finger sense, arithmetic and general cognitive ability. Seventy-six children between the ages of 5 and 12 participated in the study. The results of stepwise multiple regression analyses demonstrated that while general cognitive ability including language processing was a predictor of addition performance, finger sense was not. The impact of age on the relationship between finger sense, and addition was further examined. The participants were separated into two groups based on age. The results showed that finger gnosia score impacted addition performance in the older group but not the younger group. These results appear to support the hypothesis that fingers provide a scaffold for calculation and that if that scaffold is not properly built, it has continued differential consequences to mathematical cognition. PMID:26993292

  18. Design and calibration of zero-additional-phase SPIDER

    SciTech Connect

    Baum, Peter; Riedle, Eberhard

    2005-09-01

    Zero-additional-phase spectral phase interferometry for direct electric field reconstruction (ZAP-SPIDER) is a novel technique for measuring the temporal shape and phase of ultrashort optical pulses directly at the interaction point of a spectroscopic experiment. The scheme is suitable for an extremely wide wavelength region from the ultraviolet to the near infrared. We present a comprehensive description of the experimental setup and design guidelines to effectively apply the technique to various wavelengths and pulse durations. The calibration of the setup and procedures to check the consistency of the measurement are discussed in detail. We show experimental data for various center wavelengths and pulse durations down to 7 fs to verify the applicability to a wide range of pulse parameters.

  19. The use of procedural knowledge in simple addition and subtraction problems.

    PubMed

    Fayol, Michel; Thevenot, Catherine

    2012-06-01

    In a first experiment, adults were asked to solve one-digit additions, subtractions and multiplications. When the sign appeared 150 ms before the operands, addition and subtraction were solved faster than when the sign and the operands appeared simultaneously on screen. This priming effect was not observed for multiplication problems. A second experiment replicates these results on addition and multiplication and, moreover, shows that the priming effect in addition is observed for all problems, including very small ones such as 4+3. In fact, the only problems that were not primed by the addition sign were tie problems, which confirms that they have a special status in memory. Taken together, these results suggest that abstract procedures are pre-activated by the addition and subtraction signs and that these procedures are consequently used by adults to solve the problems. No such procedures would be pre-activated for multiplication, which are then most probably solved by retrieval of the result from memory. Moreover, while obviously two different strategies were used by individuals in order to solve addition and multiplication, solution times were similar when the problems were presented in their whole. These results, which question most of the conclusions of the current literature, support Anderson's model (1982) and Baroody's assumptions (1983) on the existence of compacted procedures that could be as fast as retrievals. PMID:22405923

  20. Showing and Telling Farming: Agricultural Shows and Re-Imaging British Agriculture

    ERIC Educational Resources Information Center

    Holloway, Lewis

    2004-01-01

    Some actors in the ''mainstream'' agricultural sector are beginning to engage in strategies of influencing public perceptions of farming, responding to public anxieties over industrialised agriculture and to a supposed separation of non-farming publics from food production. This paper focuses on agricultural shows as sites and events central to…

  1. Best in show but not best shape: a photographic assessment of show dog body condition.

    PubMed

    Such, Z R; German, A J

    2015-08-01

    Previous studies suggest that owners often wrongly perceive overweight dogs to be in normal condition. The body shape of dogs attending shows might influence owners' perceptions, with online images of overweight show winners having a negative effect. This was an observational in silico study of canine body condition. 14 obese-prone breeds and 14 matched non-obese-probe breeds were first selected, and one operator then used an online search engine to identify 40 images, per breed, of dogs that had appeared at a major national UK show (Crufts). After images were anonymised and coded, a second observer subjectively assessed body condition, in a single sitting, using a previously validated method. Of 1120 photographs initially identified, 960 were suitable for assessing body condition, with all unsuitable images being from longhaired breeds. None of the dogs (0 per cent) were underweight, 708 (74 per cent) were in ideal condition and 252 (26 per cent) were overweight. Pugs, basset hounds and Labrador retrievers were most likely to be overweight, while standard poodles, Rhodesian ridgebacks, Hungarian vizslas and Dobermanns were least likely to be overweight. Given the proportion of show dogs from some breeds that are overweight, breed standards should be redefined to be consistent with a dog in optimal body condition. PMID:26169655

  2. Critical mass experiment using U-235 foils and lucite plates

    SciTech Connect

    Sanchez, R.; Butterfield, K.; Kimpland, R.; Jaegers, P.

    1998-05-01

    The main objective of this experiment was to show how the multiplication of the system increases as moderated material is placed between highly enriched uranium foils. In addition, this experiment served to demonstrate the hand-stacking techniques, and approach to criticality by remote operation. This experiment was designed by Tom McLaughlin in the mid seventies as part of the criticality safety course that is taught at Los Alamos Critical Experiment Facility (LACEF). The W-U-235 ratio for this experiment was 215 which is where the minimum critical mass for this configuration occurs.

  3. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  4. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  5. Theoretical and experimental investigation of additive drag

    NASA Technical Reports Server (NTRS)

    Sibulkin, Merwin

    1954-01-01

    The significance of additive drag is discussed and equations for determining its approximate value are derived for annular and open-nose inlets. Charts are presented giving values of additive drag coefficient over a range of free-stream Mach numbers for open and for annular-nose inlets with conical flow at the inlet. The effects on additive drag of variable inlet-total-pressure recovery and static pressures on the centerbody are investigated and an analytical method of predicting the variation of pressure on the centerbody with mass-flow ratio is given. Experimental additive-drag values are presented for a series of 20 degree and 25 degree cone half-angle inlets and one open-nose inlet operating at free-stream Mach numbers of 1.8 and 1.6. A comparison with the theoretical values of additive drag shows excellent agreement for the open-nose inlet and moderately good agreement for the annular inlets. (author)

  6. Pyrolysis of Carbonaceous Foundry Sand Additives: Seacoal and Gilsonite

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Seacoal and gilsonite are used by the foundry industry as carbonaceous additives in green molding sands. In this study, pyrolysis was used to simulate the heating conditions that the carbonaceous additives would experience during metal casting. Gas chromatography-mass spectrometry was used to tent...

  7. Response of Dissolved Organic Matter to Warming and Nitrogen Addition

    NASA Astrophysics Data System (ADS)

    Choi, J. H.; Nguyen, H.

    2014-12-01

    Dissolved Organic Matter (DOM) is a ubiquitous mixture of soluble organic components. Since DOM is produced from the terrestrial leachate of various soil types, soil may influence the chemistry and biology of freshwater through the input of leachate and run-off. The increased temperature by climate change could dramatically change the DOM characteristics of soils through enhanced decomposition rate and losses of carbon from soil organic matter. In addition, the increase in the N-deposition affects DOM leaching from soils by changing the carbon cycling and decomposition rate of soil decay. In this study, we conducted growth chamber experiments using two types of soil (wetland and forest) under the conditions of temperature increase and N-deposition in order to investigate how warming and nitrogen addition influence the characteristics of the DOM leaching from different soil types. This leachate controls the quantity and quality of DOM in surface water systems. After 10 months of incubation, the dissolved organic carbon (DOC) concentrations decreased for almost samples in the range of 7.6 to 87.3% (ANOVA, p<0.05). The specific UV absorption (SUVA) values also decreased for almost samples after the first 3 months and then increased gradually afterward in range of 3.3 to 108.4%. Both time and the interaction between time and the temperature had the statistically significant effects on the SUVA values (MANOVA, p<0.05). Humification index (HIX) showed the significant increase trends during the duration of incubation and temperature for almost the samples (ANOVA, p<0.05). Higher decreases in the DOC values and increases in HIX were observed at higher temperatures, whereas the opposite trend was observed for samples with N-addition. The PARAFAC results showed that three fluorescence components: terrestrial humic (C1), microbial humic-like (C2), and protein-like (C3), constituted the fluorescence matrices of soil samples. During the experiment, labile DOM from the soils was

  8. Coarsening Experiment Prepared for Flight

    NASA Technical Reports Server (NTRS)

    Hickman, J. Mark

    2003-01-01

    The Coarsening in Solid-Liquid Mixtures-2 (CSLM-2) experiment is a materials science spaceflight experiment whose purpose is to investigate the kinetics of competitive particle growth within a liquid matrix. During coarsening, small particles shrink by losing atoms to larger particles, causing the larger particles to grow. In this experiment, solid particles of tin will grow (coarsen) within a liquid lead-tin eutectic matrix. The following figures show the coarsening of tin particles in a lead-tin (Pb-Sn) eutectic as a function of time. By conducting this experiment in a microgravity environment, we can study a greater range of solid volume fractions, and the effects of sedimentation present in terrestrial experiments will be negligible. The CSLM-2 experiment flew November 2002 on space shuttle flight STS-113 for operation on the International Space Station, but it could not be run because of problems with the Microgravity Science Glovebox in the U.S. Laboratory module. Additional samples will be sent to ISS on subsequent shuttle flights.

  9. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  10. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  11. Bubble formation in additive manufacturing of glass

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Peters, Daniel C.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-05-01

    Bubble formation is a common problem in glass manufacturing. The spatial density of bubbles in a piece of glass is a key limiting factor to the optical quality of the glass. Bubble formation is also a common problem in additive manufacturing, leading to anisotropic material properties. In glass Additive Manufacturing (AM) two separate types of bubbles have been observed: a foam layer caused by the reboil of the glass melt and a periodic pattern of bubbles which appears to be unique to glass additive manufacturing. This paper presents a series of studies to relate the periodicity of bubble formation to part scan speed, laser power, and filament feed rate. These experiments suggest that bubbles are formed by the reboil phenomena why periodic bubbles result from air being trapped between the glass filament and the substrate. Reboil can be detected using spectroscopy and avoided by minimizing the laser power while periodic bubbles can be avoided by a two-step laser melting process to first establish good contact between the filament and substrate before reflowing the track with higher laser power.

  12. A stochastic multi-symplectic scheme for stochastic Maxwell equations with additive noise

    SciTech Connect

    Hong, Jialin; Zhang, Liying

    2014-07-01

    In this paper we investigate a stochastic multi-symplectic method for stochastic Maxwell equations with additive noise. Based on the stochastic version of variational principle, we find a way to obtain the stochastic multi-symplectic structure of three-dimensional (3-D) stochastic Maxwell equations with additive noise. We propose a stochastic multi-symplectic scheme and show that it preserves the stochastic multi-symplectic conservation law and the local and global stochastic energy dissipative properties, which the equations themselves possess. Numerical experiments are performed to verify the numerical behaviors of the stochastic multi-symplectic scheme.

  13. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  14. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  15. Microgravity Experiments On Animals

    NASA Technical Reports Server (NTRS)

    Dalton, B. P.; Leon, H.; Hogan, R.; Clarke, B.; Tollinger, D.

    1991-01-01

    Paper describes experiments on animal subjects planned for Spacelab Life Sciences 1 mission. Laboratory equipment evaluated, and physiological experiments performed. Represents first step in establishing technology for maintaining and manipulating rodents, nonhuman primates, amphibians, and plants during space flight without jeopardizing crew's environment. In addition, experiments focus on effects of microgravity on cardiopulmonary, cardiovascular, and musculoskeletal systems; on regulation of volume of blood and production of red blood cells; and on calcium metabolism and gravity receptors.

  16. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity

    PubMed Central

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima’D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future. PMID:27077652

  17. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity.

    PubMed

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima'D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future.

  18. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  19. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate.

  20. Pronounced effects of additional resistance in Andreev reflection spectroscopy

    NASA Astrophysics Data System (ADS)

    Chen, T. Y.; Huang, S. X.; Chien, C. L.

    2010-06-01

    We present a systematic investigation of the additional resistance (RE) , which is an unavoidable consequence of pseudo-four-probe electrical measurements, on the point-contact Andreev reflection (PCAR) spectrum by both modeling and experiments. Instead of considering the total resistance between the two voltage leads across a point contact as a sum of a contact resistance (RC) and a fixed sample resistance (RS) , it is essential to treat the total resistance as a sum of the Andreev resistance RAR and the additional resistance RE , which are, respectively, the resistances affected and unaffected by the Andreev reflection process. We show a detailed formalism of taking RE into account in modeling and demonstrate that the PCAR spectrum can be drastically affected by the presence of RE . Experimentally, we have found that not only RE cannot be readily measured or even estimated, it is in fact different for each contact, depending on the contact resistance and whether the contact is near the purely ballistic regime or the purely diffusive regime. A self-consistent process is necessary to analyze the entire PCAR spectrum, properly normalize the conductance, determine RE , and other parameters including the spin polarization and the superconducting gap for each contact. We determine RE for various contacts on specimens with different resistivity and resolve the causes of RE . For contacts close to the diffusive regime, there are two sources of RE : a dominant contribution which is linearly proportional to the total resistance and a constant value from the sample resistance. We also address the effects of additional resistance when PCAR is administered in the ballistic limit and in the diffusive limit. With the proper treatment of the additional resistance, we demonstrate that PCAR can quantitatively extract essential information of spin polarization and superconducting gap.

  1. Addition lens alleviates reading-induced ocular stress.

    PubMed

    Choy, Camus K; Siu, Andrew W; Lam, Frankie Y; Tse, Jesse T; Lau, Sylvania Y

    2000-01-01

    BACKGROUND: Near tasks have been associated with binocular stress to induce myopia. The aim of this study was to investigate the effects of accommodation on reading-induced near heterophoria. METHODS: We measured the near heterophoria of 22 young adults before and after 30 minutes of reading. The reading task comprised a column of local English newsletter studied monocularly at 33 cm. One of three addition lenses (that is, 0.00 D, +1.50 D and +3.00 D) was randomly incorporated into the optical prescription. The difference in near heterophoria between the pre- and post-reading task was recorded. The experiment was completed on separate days for the other lens powers. RESULTS: Reading for 30 minutes with a plano lens addition (control) increased the near heterophoria by 3.81 +/- 0.95 prism dioptres (SEM) toward exo-deviation (p < 0.002). Addition of a +3.00 D lens significantly decreased the reading-induced exophoric shift to 1.36 +/- 0.55 prism dioptres (SEM). Similarly, a +1.50 D lens reduced the exophoric shift to 3.14 +/- 0.85 prism dioptres (SEM) but the difference was not statistically significant when compared with the control. CONCLUSIONS: The results showed that close work might cause eye strain via the extraocular muscles. Incorporation of plus lens into the optical correction caused a power-dependent reduction in the stress, that is, smaller exophoric shift. Whether binocular stress contributes to myopia and its response to addition lens therapy deserve further investigation.

  2. An Undergraduate Endeavor: Assembling a Live Planetarium Show About Mars

    NASA Astrophysics Data System (ADS)

    McGraw, Allison M.

    2016-10-01

    Viewing the mysterious red planet Mars goes back thousands of years with just the human eye but in more recent years the growth of telescopes, satellites and lander missions unveil unrivaled detail of the Martian surface that tells a story worth listening to. This planetarium show will go through the observations starting with the ancients to current understandings of the Martian surface, atmosphere and inner-workings through past and current Mars missions. Visual animations of its planetary motions, display of high resolution images from the Hi-RISE (High Resolution Imaging Science Experiment) and CTX (Context Camera) data imagery aboard the MRO (Mars Reconnaissance Orbiter) as well as other datasets will be used to display the terrain detail and imagery of the planet Mars with a digital projection system. Local planetary scientists and Mars specialists from the Lunar and Planetary Lab at the University of Arizona (Tucson, AZ) will be interviewed and used in the show to highlight current technology and understandings of the red planet. This is an undergraduate project that is looking for collaborations and insight in order gain structure in script writing that will teach about this planetary body to all ages in the format of a live planetarium show.

  3. CO2 study shows effects on scrub oak environment

    NASA Technical Reports Server (NTRS)

    2000-01-01

    CO2 study site manager and plant physiologist Graham Hymus (left) examines scrub oak foliage while project engineer David Johnson (right) looks on. The life sciences study is showing that rising levels of carbon dioxide in our atmosphere, caused by the burning of fossil fuels, could spur plant growth globally. The site of KSC's study is a natural scrub oak area near the Vehicle Assembly Building. Twelve-foot areas of scrub oak have been enclosed in 16 open-top test chambers into which CO2 has been blown. Five scientists from NASA and the Smithsonian Environmental Research Center in Edgewater, Md., work at the site to monitor experiments and keep the site running. Scientists hope to continue the study another five to 10 years. More information on this study can be found in Release No. 57- 00.

  4. Advanced biostack experiment

    NASA Technical Reports Server (NTRS)

    Buecker, H.

    1981-01-01

    The Advanced Biostack Experiment is described. The objectives are: (1) to confirm, complement, and enlarge the information obtained from the previous experiments by applying improved and advanced methods of localization and physical and biological evaluation, performing advanced experiments based on these data, and including additional biological specimens and additional radiation detectors; (2) to determine the biological importance of nuclear disintegration stars; (3) to determine the interference of HZE particle induced effects with those of other space flight factors (e.g., weightlessness); and (4) to determine the distribution of HZE particles and of disintegration stars at different locations inside the module and on the pallet.

  5. Five Kepler target stars that show multiple transiting exoplanet candidates

    SciTech Connect

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Buchhave, Lars A.; Caldwell, Douglas A.; Cochran, William D.; Endl, Michael; Fabrycky, Daniel C.; Fressin, Francois; Ford, Eric B.; Fortney, Jonathan J.; /UC, Santa Cruz, Phys. Dept. /NASA, Ames

    2010-06-01

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities - two near 2:1 and one just outside 5:2. We discuss the implications that multitransiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories; as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTV) due to gravitational interactions - though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  6. AirShow 1.0 CFD Software Users' Guide

    NASA Technical Reports Server (NTRS)

    Mohler, Stanley R., Jr.

    2005-01-01

    AirShow is visualization post-processing software for Computational Fluid Dynamics (CFD). Upon reading binary PLOT3D grid and solution files into AirShow, the engineer can quickly see how hundreds of complex 3-D structured blocks are arranged and numbered. Additionally, chosen grid planes can be displayed and colored according to various aerodynamic flow quantities such as Mach number and pressure. The user may interactively rotate and translate the graphical objects using the mouse. The software source code was written in cross-platform Java, C++, and OpenGL, and runs on Unix, Linux, and Windows. The graphical user interface (GUI) was written using Java Swing. Java also provides multiple synchronized threads. The Java Native Interface (JNI) provides a bridge between the Java code and the C++ code where the PLOT3D files are read, the OpenGL graphics are rendered, and numerical calculations are performed. AirShow is easy to learn and simple to use. The source code is available for free from the NASA Technology Transfer and Partnership Office.

  7. Five Kepler Target Stars That Show Multiple Transiting Exoplanet Candidates

    NASA Astrophysics Data System (ADS)

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Buchhave, Lars A.; Caldwell, Douglas A.; Cochran, William D.; Endl, Michael; Fabrycky, Daniel C.; Fressin, François; Ford, Eric B.; Fortney, Jonathan J.; Haas, Michael J.; Holman, Matthew J.; Howell, Steve B.; Isaacson, Howard; Jenkins, Jon M.; Koch, David; Latham, David W.; Lissauer, Jack J.; Moorhead, Althea V.; Morehead, Robert C.; Marcy, Geoffrey; MacQueen, Phillip J.; Quinn, Samuel N.; Ragozzine, Darin; Rowe, Jason F.; Sasselov, Dimitar D.; Seager, Sara; Torres, Guillermo; Welsh, William F.

    2010-12-01

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities—two near 2:1 and one just outside 5:2. We discuss the implications that multi-transiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories, as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTVs) due to gravitational interactions, though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  8. Nitrogen Addition and Warming Independently Influence the Belowground Micro-Food Web in a Temperate Steppe

    PubMed Central

    Li, Qi; Bai, Huahua; Liang, Wenju; Xia, Jianyang; Wan, Shiqiang; van der Putten, Wim H.

    2013-01-01

    Climate warming and atmospheric nitrogen (N) deposition are known to influence ecosystem structure and functioning. However, our understanding of the interactive effect of these global changes on ecosystem functioning is relatively limited, especially when it concerns the responses of soils and soil organisms. We conducted a field experiment to study the interactive effects of warming and N addition on soil food web. The experiment was established in 2006 in a temperate steppe in northern China. After three to four years (2009–2010), we found that N addition positively affected microbial biomass and negatively influenced trophic group and ecological indices of soil nematodes. However, the warming effects were less obvious, only fungal PLFA showed a decreasing trend under warming. Interestingly, the influence of N addition did not depend on warming. Structural equation modeling analysis suggested that the direct pathway between N addition and soil food web components were more important than the indirect connections through alterations in soil abiotic characters or plant growth. Nitrogen enrichment also affected the soil nematode community indirectly through changes in soil pH and PLFA. We conclude that experimental warming influenced soil food web components of the temperate steppe less than N addition, and there was little influence of warming on N addition effects under these experimental conditions. PMID:23544140

  9. Heterosexual experience, marital status, and orientation of homosexual males.

    PubMed

    McConaghy, N

    1978-11-01

    The penile volume responses of homosexual males to pictures of nude women and men were measured and related to the subjects' marital status and experience of heterosexual intercourse. Single subjects with no experience of heterosexual intercourse and married subjects with a history of intercourse with only their wives showed significantly greater response to pictures of men compared to pictures of women than did single subjects with experience of heterosexual intercourse and married subjects with experience of intercourse with women additional to their wives. It was concluded that extensive experience of heterosexual intercourse with one partner did not reduce homosexual responsiveness as measured by subjects' penile response to pictures of nude men and women. It was further concluded that some homosexual males showed physiological evidence of a degree of bisexuality in addition to the behavioral evidence that they sought heterosexual physical relationships.

  10. Additive attacks on speaker recognition

    NASA Astrophysics Data System (ADS)

    Farrokh Baroughi, Alireza; Craver, Scott

    2014-02-01

    Speaker recognition is used to identify a speaker's voice from among a group of known speakers. A common method of speaker recognition is a classification based on cepstral coefficients of the speaker's voice, using a Gaussian mixture model (GMM) to model each speaker. In this paper we try to fool a speaker recognition system using additive noise such that an intruder is recognized as a target user. Our attack uses a mixture selected from a target user's GMM model, inverting the cepstral transformation to produce noise samples. In our 5 speaker data base, we achieve an attack success rate of 50% with a noise signal at 10dB SNR, and 95% by increasing noise power to 0dB SNR. The importance of this attack is its simplicity and flexibility: it can be employed in real time with no processing of an attacker's voice, and little computation is needed at the moment of detection, allowing the attack to be performed by a small portable device. For any target user, knowing that user's model or voice sample is sufficient to compute the attack signal, and it is enough that the intruder plays it while he/she is uttering to be classiffed as the victim.

  11. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  12. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  13. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  14. Size matters: plasticity in metabolic scaling shows body-size may modulate responses to climate change.

    PubMed

    Carey, Nicholas; Sigwart, Julia D

    2014-08-01

    Variability in metabolic scaling in animals, the relationship between metabolic rate ( R: ) and body mass ( M: ), has been a source of debate and controversy for decades. R: is proportional to MB: , the precise value of B: much debated, but historically considered equal in all organisms. Recent metabolic theory, however, predicts B: to vary among species with ecology and metabolic level, and may also vary within species under different abiotic conditions. Under climate change, most species will experience increased temperatures, and marine organisms will experience the additional stressor of decreased seawater pH ('ocean acidification'). Responses to these environmental changes are modulated by myriad species-specific factors. Body-size is a fundamental biological parameter, but its modulating role is relatively unexplored. Here, we show that changes to metabolic scaling reveal asymmetric responses to stressors across body-size ranges; B: is systematically decreased under increasing temperature in three grazing molluscs, indicating smaller individuals were more responsive to warming. Larger individuals were, however, more responsive to reduced seawater pH in low temperatures. These alterations to the allometry of metabolism highlight abiotic control of metabolic scaling, and indicate that responses to climate warming and ocean acidification may be modulated by body-size.

  15. Size matters: plasticity in metabolic scaling shows body-size may modulate responses to climate change

    PubMed Central

    Carey, Nicholas; Sigwart, Julia D.

    2014-01-01

    Variability in metabolic scaling in animals, the relationship between metabolic rate (R) and body mass (M), has been a source of debate and controversy for decades. R is proportional to Mb, the precise value of b much debated, but historically considered equal in all organisms. Recent metabolic theory, however, predicts b to vary among species with ecology and metabolic level, and may also vary within species under different abiotic conditions. Under climate change, most species will experience increased temperatures, and marine organisms will experience the additional stressor of decreased seawater pH (‘ocean acidification’). Responses to these environmental changes are modulated by myriad species-specific factors. Body-size is a fundamental biological parameter, but its modulating role is relatively unexplored. Here, we show that changes to metabolic scaling reveal asymmetric responses to stressors across body-size ranges; b is systematically decreased under increasing temperature in three grazing molluscs, indicating smaller individuals were more responsive to warming. Larger individuals were, however, more responsive to reduced seawater pH in low temperatures. These alterations to the allometry of metabolism highlight abiotic control of metabolic scaling, and indicate that responses to climate warming and ocean acidification may be modulated by body-size. PMID:25122741

  16. Size matters: plasticity in metabolic scaling shows body-size may modulate responses to climate change.

    PubMed

    Carey, Nicholas; Sigwart, Julia D

    2014-08-01

    Variability in metabolic scaling in animals, the relationship between metabolic rate ( R: ) and body mass ( M: ), has been a source of debate and controversy for decades. R: is proportional to MB: , the precise value of B: much debated, but historically considered equal in all organisms. Recent metabolic theory, however, predicts B: to vary among species with ecology and metabolic level, and may also vary within species under different abiotic conditions. Under climate change, most species will experience increased temperatures, and marine organisms will experience the additional stressor of decreased seawater pH ('ocean acidification'). Responses to these environmental changes are modulated by myriad species-specific factors. Body-size is a fundamental biological parameter, but its modulating role is relatively unexplored. Here, we show that changes to metabolic scaling reveal asymmetric responses to stressors across body-size ranges; B: is systematically decreased under increasing temperature in three grazing molluscs, indicating smaller individuals were more responsive to warming. Larger individuals were, however, more responsive to reduced seawater pH in low temperatures. These alterations to the allometry of metabolism highlight abiotic control of metabolic scaling, and indicate that responses to climate warming and ocean acidification may be modulated by body-size. PMID:25122741

  17. Interactions between sealing materials and lubricating oil additives

    SciTech Connect

    Winkenbach, R.; Von Arndt, E.M.; Mindermann, H.

    1987-01-01

    Due to the increasingly higher application demands, engine and transmission manufactures are today using lubrication oils with more and more additives. The result is that seal materials are being damaged when exposed to such conditions and such additives. This paper shows the effects of basic oils with, and without, additives on elastomeric materials such as NBR, ACM, MVQ and FPM.

  18. Learning from a dive show in an aquarium setting

    NASA Astrophysics Data System (ADS)

    Walsh, Lori M.

    A study was conducted at an aquarium next to a theme park to understand information recalled from two versions of shows viewed at the largest display. The goal of this research was to determine if learning was enhanced by having a diver in water as the treatment group. This project focused on the knowledge recalled about shark and ray feeding adaptations, the information recalled about the mentioned conservation message about sustainable seafood and the potential of the two shows to make memorable experiences. During the project, 30 adult participants from each group were given a survey with five open-ended questions. Results suggest that the diver might distract from biological content information, or that the diver is such a novel element that it interferes with recall. While guests seemed to recall information about rays and sharks, the amount of information was not substantial. It appears that the diver does not affect content messaging but does impact whether guests attend to Seafood Watch messaging. The diver may have been so novel that the treatment group could not attend to the conservation message that was delivered, regardless of topic, or the control group recalled the message because the guests were not distracted by the diver or feeding. The absence of a diver seems to allow the guests to better attend to what is happening outside of the tank. While adding a diver increases photo opportunities and may bring guests to a show, the results seem to indicate that it does not significantly increase recall. The results of this study show that guests in a theme park setting can recall information from an educational program. Guests may not enter this hybrid aquarium with the intention of learning, but recall, one of the components in learning, does occur.

  19. HIV-positive plaintiff must show job transfer caused harm.

    PubMed

    1998-08-21

    A teacher in the De Kalb County School District has argued that the district discriminated against him when they transferred him to a different job because he is HIV-positive. The teacher was transferred from a psychoeducational class that was limited to aggressive and violent special-needs students to a classroom of students with milder behavioral disorders. The district offered to pay for the additional training that was necessary for the new position and granted the teacher a grace period in which to complete the training. A Federal district judge ruled in favor of the teacher in a bench trial, but the 11th Circuit Court of Appeals stated that the lower court failed to show that the job transfer constituted an adverse employment action in violation of the Americans with Disabilities Act. The appeals court further indicated that there was insufficient evidence to determine whether the teacher did or did not benefit from taking the additional classes, which could result in making him more employable. The appeals court also questioned the trial judge's conclusion that the teacher's HIV-seropositivity posed only a remote and theoretical risk to the aggressive students.

  20. 5. Credit BG. This interior view shows the weigh room, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Credit BG. This interior view shows the weigh room, looking west (240°): Electric lighting and scale read-outs (boxes with circular windows on the wall) are fitted with explosion-proof enclosures; these enclosures prevent malfunctioning electrical parts from sparking and starting fires or explosions. One marble table and scale have been removed at the extreme left of the view. Two remaining scales handle small and large quantities of propellants and additives. Marble tables do not absorb chemicals or conduct electricity; their mass also prevents vibration from upsetting the scales. The floor has an electrically conductive coating to dissipate static electric charges, thus preventing sparks which might ignite propellants. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

  1. 16. Copy of a post card showing the Lavelle School, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Copy of a post card showing the Lavelle School, c.1900; note that the building is one story in height and contains a one story addition in the rear. It also contains a projecting entrance tower and the windows have shutters. There are no windows or chimneys on the west wall and the front yard is defined by a wood picket fence on the west side and a metal picket fence on the north side. The identities of the children standing near the door are not known. (Copy of photo reproduced with permission from the Ashland Public Library and Mrs. Helen Edling, former Postmaster of Lavelle {she currently resides in Lavelle}; the original photograph is in Mrs. Edling's collection) - Lavelle School, Township Road 905, Main Street, Village of Lavelle, Lavelle, Schuylkill County, PA

  2. Additional Crime Scenes for Projectile Motion Unit

    NASA Astrophysics Data System (ADS)

    Fullerton, Dan; Bonner, David

    2011-12-01

    Building students' ability to transfer physics fundamentals to real-world applications establishes a deeper understanding of underlying concepts while enhancing student interest. Forensic science offers a great opportunity for students to apply physics to highly engaging, real-world contexts. Integrating these opportunities into inquiry-based problem solving in a team environment provides a terrific backdrop for fostering communication, analysis, and critical thinking skills. One such activity, inspired jointly by the museum exhibit "CSI: The Experience"2 and David Bonner's TPT article "Increasing Student Engagement and Enthusiasm: A Projectile Motion Crime Scene,"3 provides students with three different crime scenes, each requiring an analysis of projectile motion. In this lesson students socially engage in higher-order analysis of two-dimensional projectile motion problems by collecting information from 3-D scale models and collaborating with one another on its interpretation, in addition to diagramming and mathematical analysis typical to problem solving in physics.

  3. Evolution of solidification texture during additive manufacturing.

    PubMed

    Wei, H L; Mazumder, J; DebRoy, T

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  4. Evolution of solidification texture during additive manufacturing

    DOE PAGES

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numericalmore » modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.« less

  5. Weldability of Additive Manufactured Stainless Steel

    NASA Astrophysics Data System (ADS)

    Matilainen, Ville-Pekka; Pekkarinen, Joonas; Salminen, Antti

    Part size in additive manufacturing is limited by the size of building area of AM equipment. Occasionally, larger constructions that AM machines are able to produce, are needed, and this creates demand for welding AM parts together. However there is very little information on welding of additive manufactured stainless steels. The aim of this study was to investigate the weldability aspects of AM material. In this study, comparison of the bead on plate welds between AM parts and sheet metal parts is done. Used material was 316L stainless steel, AM and sheet metal, and parts were welded with laser welding. Weld quality was evaluated visually from macroscopic images. Results show that there are certain differences in the welds in AM parts compared to the welds in sheet metal parts. Differences were found in penetration depths and in type of welding defects. Nevertheless, this study presents that laser welding is suitable process for welding AM parts.

  6. Evolution of solidification texture during additive manufacturing

    PubMed Central

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

  7. p53 and rapamycin are additive

    PubMed Central

    Campisi, Judith; Huang, Jing; Jones, Diane; Dodds, Sherry G.; Williams, Charnae; Hubbard, Gene; Livi, Carolina B.; Gao, Xiaoli; Weintraub, Susan; Curiel, Tyler; Sharp, Z. Dave; Hasty, Paul

    2015-01-01

    Mechanistic target of rapamycin (mTOR) is a kinase found in a complex (mTORC1) that enables macromolecular synthesis and cell growth and is implicated in cancer etiology. The rapamycin-FK506 binding protein 12 (FKBP12) complex allosterically inhibits mTORC1. In response to stress, p53 inhibits mTORC1 through a separate pathway involving cell signaling and amino acid sensing. Thus, these different mechanisms could be additive. Here we show that p53 improved the ability of rapamycin to: 1) extend mouse life span, 2) suppress ionizing radiation (IR)-induced senescence-associated secretory phenotype (SASP) and 3) increase the levels of amino acids and citric acid in mouse embryonic stem (ES) cells. This additive effect could have implications for cancer treatment since rapamycin and p53 are anti-oncogenic. PMID:26158292

  8. Evolution of solidification texture during additive manufacturing

    SciTech Connect

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  9. Nitrogen addition regulates soil nematode community composition through ammonium suppression.

    PubMed

    Wei, Cunzheng; Zheng, Huifen; Li, Qi; Lü, Xiaotao; Yu, Qiang; Zhang, Haiyang; Chen, Quansheng; He, Nianpeng; Kardol, Paul; Liang, Wenju; Han, Xingguo

    2012-01-01

    Nitrogen (N) enrichment resulting from anthropogenic activities has greatly changed the composition and functioning of soil communities. Nematodes are one of the most abundant and diverse groups of soil organisms, and they occupy key trophic positions in the soil detritus food web. Nematodes have therefore been proposed as useful indicators for shifts in soil ecosystem functioning under N enrichment. Here, we monitored temporal dynamics of the soil nematode community using a multi-level N addition experiment in an Inner Mongolia grassland. Measurements were made three years after the start of the experiment. We used structural equation modeling (SEM) to explore the mechanisms regulating nematode responses to N enrichment. Across the N enrichment gradient, significant reductions in total nematode abundance, diversity (H' and taxonomic richness), maturity index (MI), and the abundance of root herbivores, fungivores and omnivores-predators were found in August. Root herbivores recovered in September, contributing to the temporal variation of total nematode abundance across the N gradient. Bacterivores showed a hump-shaped relationship with N addition rate, both in August and September. Ammonium concentration was negatively correlated with the abundance of total and herbivorous nematodes in August, but not in September. Ammonium suppression explained 61% of the variation in nematode richness and 43% of the variation in nematode trophic group composition. Ammonium toxicity may occur when herbivorous nematodes feed on root fluid, providing a possible explanation for the negative relationship between herbivorous nematodes and ammonium concentration in August. We found a significantly positive relationship between fungivores and fungal phospholipid fatty acids (PLFA), suggesting bottom-up control of fungivores. No such relationship was found between bacterivorous nematodes and bacterial PLFA. Our findings contribute to the understanding of effects of N enrichment in

  10. Electric utility use of fireside additives. Final report

    SciTech Connect

    Locklin, D.W.; Krause, H.H.; Anson, D.; Reid, W.

    1980-01-01

    Fireside additives have been used or proposed for use in fossil-fired utility boilers to combat a number of problems related to boiler performance and reliability. These problems include corrosion, fouling, superheat control, and acidic emissions. Fuel additives and other fireside additives have been used mainly with oil firing; however, there is growing experience with additives in coal-firing, especially for flyash conditioning to improve the performance of electrostatic precipitators. In decisions regarding the selection and use of additives, utilities have had to rely extensively on empiricism, due partly to an incomplete understanding of processes involved and partly to the limited amount of quantitative data. The study reported here was sponsored by the Electric Power Research Institute to assemble and analyze pertinent operating experience and to recommend guidelines for utility decisions on the use of additives. The combined results of the state-of-the-art review of technical literature and a special survey of utility experience are reported. A total of 38 utilities participated in the survey, providing information on trials conducted on 104 units in 93 different plants. Altogether, 445 separate trials were reported, each representing a unit/additive/fuel combination. Additives used in these trials included 90 different additive formulations, both pure compounds and proprietary products. These formulations were categorized into 37 generic classes according to their chemical constituents, and the results of the survey are presented by these generic classes. The findings are organized according to the operating problems for which fireside additives are used. Guidelines are presented for utility use in additive selection and in planning additive trials.

  11. Mixtures of thermostable enzymes show high performance in biomass saccharification.

    PubMed

    Kallioinen, Anne; Puranen, Terhi; Siika-aho, Matti

    2014-07-01

    Optimal enzyme mixtures of six Trichoderma reesei enzymes and five thermostable enzyme components were developed for the hydrolysis of hydrothermally pretreated wheat straw, alkaline oxidised sugar cane bagasse and steam-exploded bagasse by statistically designed experiments. Preliminary studies to narrow down the optimization parameters showed that a cellobiohydrolase/endoglucanase (CBH/EG) ratio of 4:1 or higher of thermostable enzymes gave the maximal CBH-EG synergy in the hydrolysis of hydrothermally pretreated wheat straw. The composition of optimal enzyme mixtures depended clearly on the substrate and on the enzyme system studied. The optimal enzyme mixture of thermostable enzymes was dominated by Cel7A and required a relatively high amount of xylanase, whereas with T. reesei enzymes, the high proportion of Cel7B appeared to provide the required xylanase activity. The main effect of the pretreatment method was that the required proportion of xylanase was higher and the proportion of Cel7A lower in the optimized mixture for hydrolysis of alkaline oxidised bagasse than steam-exploded bagasse. In prolonged hydrolyses, less Cel7A was generally required in the optimal mixture. Five-component mixtures of thermostable enzymes showed comparable hydrolysis yields to those of commercial enzyme mixtures.

  12. Monkeys show recognition without priming in a classification task

    PubMed Central

    Basile, Benjamin M.; Hampton, Robert R.

    2012-01-01

    Humans show visual perceptual priming by identifying degraded images faster and more accurately if they have seen the original images, while simultaneously failing to recognize the same images. Such priming is commonly thought, with little evidence, to be widely distributed phylogenetically. Following Brodbeck (1997), we trained rhesus monkeys (Macaca mulatta) to categorize photographs according to content (e.g., birds, fish, flowers, people). In probe trials, we tested whether monkeys were faster or more accurate at categorizing degraded versions of previously seen images (primed) than degraded versions of novel images (unprimed). Monkeys categorized reliably, but showed no benefit from having previously seen the images. This finding was robust across manipulations of image quality (color, grayscale, line drawings), type of image degradation (occlusion, blurring), levels of processing, and number of repetitions of the prime. By contrast, in probe matching-to-sample trials, monkeys recognized the primes, demonstrating that they remembered the primes and could discriminate them from other images in the same category under the conditions used to test for priming. Two experiments that replicated Brodbeck’s (1997) procedures also produced no evidence of priming. This inability to find priming in monkeys under perceptual conditions sufficient for recognition presents a puzzle. PMID:22975587

  13. Evaluating Additive Interaction Using Survival Percentiles.

    PubMed

    Bellavia, Andrea; Bottai, Matteo; Orsini, Nicola

    2016-05-01

    Evaluation of statistical interaction in time-to-event analysis is usually limited to the study of multiplicative interaction, via inclusion of a product term in a Cox proportional-hazard model. Measures of additive interaction are available but seldom used. All measures of interaction in survival analysis, whether additive or multiplicative, are in the metric of hazard, usually assuming that the interaction between two predictors of interest is constant during the follow-up period. We introduce a measure to evaluate additive interaction in survival analysis in the metric of time. This measure can be calculated by evaluating survival percentiles, defined as the time points by which different subpopulations reach the same incidence proportion. Using this approach, the probability of the outcome is fixed and the time variable is estimated. We also show that by using a regression model for the evaluation of conditional survival percentiles, including a product term between the two exposures in the model, interaction is evaluated as a deviation from additivity of the effects. In the simple case of two binary exposures, the product term is interpreted as excess/decrease in survival time (i.e., years, months, days) due to the presence of both exposures. This measure of interaction is dependent on the fraction of events being considered, thus allowing evaluation of how interaction changes during the observed follow-up. Evaluation of interaction in the context of survival percentiles allows deriving a measure of additive interaction without assuming a constant effect over time, overcoming two main limitations of commonly used approaches.

  14. High velocity impact experiment (HVIE)

    SciTech Connect

    Toor, A.; Donich, T.; Carter, P.

    1998-02-01

    The HVIE space project was conceived as a way to measure the absolute EOS for approximately 10 materials at pressures up to {approximately}30 Mb with order-of-magnitude higher accuracy than obtainable in any comparable experiment conducted on earth. The experiment configuration is such that each of the 10 materials interacts with all of the others thereby producing one-hundred independent, simultaneous EOS experiments The materials will be selected to provide critical information to weapons designers, National Ignition Facility target designers and planetary and geophysical scientists. In addition, HVIE will provide important scientific information to other communities, including the Ballistic Missile Defense Organization and the lethality and vulnerability community. The basic HVIE concept is to place two probes in counter rotating, highly elliptical orbits and collide them at high velocity (20 km/s) at 100 km altitude above the earth. The low altitude of the experiment will provide quick debris strip-out of orbit due to atmospheric drag. The preliminary conceptual evaluation of the HVIE has found no show stoppers. The design has been very easy to keep within the lift capabilities of commonly available rides to low earth orbit including the space shuttle. The cost of approximately 69 million dollars for 100 EOS experiment that will yield the much needed high accuracy, absolute measurement data is a bargain!

  15. Backward and forward blocking in human electrodermal conditioning: blocking requires an assumption of outcome additivity.

    PubMed

    Mitchell, Chris J; Lovibond, Peter F

    2002-10-01

    Blocking was observed in two human Pavlovian conditioning studies in which colour cues signalled shock. Both forward (Experiment 1) and backward (Experiment 2) blocking was demonstrated, but only when prior verbal and written instructions suggested that if two signals of shock (A+ and B+) were presented together, a double shock would result (AB++). In this case, participants could assume that the outcome magnitude was additive. Participants given non-additivity instructions (A+ and B+ combined would result in the same outcome, a single shock) failed to show blocking. Modifications required for associative models of learning, and normative statistical accounts of causal induction, to account for the impact of additivity instructions on the blocking effect, are discussed. It is argued that the blocking shown in the present experiments resulted from the operation, not of an error-correction learning rule, nor of a simple contingency detection mechanism, but of a more complex inferential process based on propositional knowledge. Consistent with the present data, blocking is a logical outcome of an A+/AB+ design only if participants can assume that outcomes will be additive. PMID:12350284

  16. Stirling machine operating experience

    SciTech Connect

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  17. Efficient Improvement of Silage Additives by Using Genetic Algorithms

    PubMed Central

    Davies, Zoe S.; Gilbert, Richard J.; Merry, Roger J.; Kell, Douglas B.; Theodorou, Michael K.; Griffith, Gareth W.

    2000-01-01

    The enormous variety of substances which may be added to forage in order to manipulate and improve the ensilage process presents an empirical, combinatorial optimization problem of great complexity. To investigate the utility of genetic algorithms for designing effective silage additive combinations, a series of small-scale proof of principle silage experiments were performed with fresh ryegrass. Having established that significant biochemical changes occur over an ensilage period as short as 2 days, we performed a series of experiments in which we used 50 silage additive combinations (prepared by using eight bacterial and other additives, each of which was added at six different levels, including zero [i.e., no additive]). The decrease in pH, the increase in lactate concentration, and the free amino acid concentration were measured after 2 days and used to calculate a “fitness” value that indicated the quality of the silage (compared to a control silage made without additives). This analysis also included a “cost” element to account for different total additive levels. In the initial experiment additive levels were selected randomly, but subsequently a genetic algorithm program was used to suggest new additive combinations based on the fitness values determined in the preceding experiments. The result was very efficient selection for silages in which large decreases in pH and high levels of lactate occurred along with low levels of free amino acids. During the series of five experiments, each of which comprised 50 treatments, there was a steady increase in the amount of lactate that accumulated; the best treatment combination was that used in the last experiment, which produced 4.6 times more lactate than the untreated silage. The additive combinations that were found to yield the highest fitness values in the final (fifth) experiment were assessed to determine a range of biochemical and microbiological quality parameters during full-term silage

  18. Human-directed social behaviour in dogs shows significant heritability.

    PubMed

    Persson, M E; Roth, L S V; Johnsson, M; Wright, D; Jensen, P

    2015-04-01

    Through domestication and co-evolution with humans, dogs have developed abilities to attract human attention, e.g. in a manner of seeking assistance when faced with a problem solving task. The aims of this study were to investigate within breed variation in human-directed contact seeking in dogs and to estimate its genetic basis. To do this, 498 research beagles, bred and kept under standardized conditions, were tested in an unsolvable problem task. Contact seeking behaviours recorded included both eye contact and physical interactions. Behavioural data was summarized through a principal component analysis, resulting in four components: test interactions, social interactions, eye contact and physical contact. Females scored significantly higher on social interactions and physical contact and age had an effect on eye contact scores. Narrow sense heritabilities (h(2) ) of the two largest components were estimated at 0.32 and 0.23 but were not significant for the last two components. These results show that within the studied dog population, behavioural variation in human-directed social behaviours was sex dependent and that the utilization of eye contact seeking increased with age and experience. Hence, heritability estimates indicate a significant genetic contribution to the variation found in human-directed social interactions, suggesting that social skills in dogs have a genetic basis, but can also be shaped and enhanced through individual experiences. This research gives the opportunity to further investigate the genetics behind dogs' social skills, which could also play a significant part into research on human social disorders such as autism.

  19. Human-directed social behaviour in dogs shows significant heritability.

    PubMed

    Persson, M E; Roth, L S V; Johnsson, M; Wright, D; Jensen, P

    2015-04-01

    Through domestication and co-evolution with humans, dogs have developed abilities to attract human attention, e.g. in a manner of seeking assistance when faced with a problem solving task. The aims of this study were to investigate within breed variation in human-directed contact seeking in dogs and to estimate its genetic basis. To do this, 498 research beagles, bred and kept under standardized conditions, were tested in an unsolvable problem task. Contact seeking behaviours recorded included both eye contact and physical interactions. Behavioural data was summarized through a principal component analysis, resulting in four components: test interactions, social interactions, eye contact and physical contact. Females scored significantly higher on social interactions and physical contact and age had an effect on eye contact scores. Narrow sense heritabilities (h(2) ) of the two largest components were estimated at 0.32 and 0.23 but were not significant for the last two components. These results show that within the studied dog population, behavioural variation in human-directed social behaviours was sex dependent and that the utilization of eye contact seeking increased with age and experience. Hence, heritability estimates indicate a significant genetic contribution to the variation found in human-directed social interactions, suggesting that social skills in dogs have a genetic basis, but can also be shaped and enhanced through individual experiences. This research gives the opportunity to further investigate the genetics behind dogs' social skills, which could also play a significant part into research on human social disorders such as autism. PMID:25703740

  20. Regenerated Uranium Separation in Matched Abundance Ratio Cascade with Additional Product Flow

    NASA Astrophysics Data System (ADS)

    Maslyukov, E. V.; Palkin, V. A.

    2016-09-01

    This paper addresses known methods used to purify regenerated uranium in single and double cascades. A new method for separating regenerated uranium has been developed that enables a significant reduction of the concentration of 232,234U in the additional product flow. Matched abundance ratio cascades (M*-cascades) with different key components and additional product flow are used in the new method. Main product flow of the M*-cascade contains low enriched regenerated uranium. It can be used for reactor fuel production. Purified product can be enriched in the ordinary cascade in compliance with the requirements of ASTM C 996-10 set for isotopes 232,234U in low enriched commercial uranium, which is usually produced from the natural one. Computer experiment based on the new method has been performed. The experiment shows that the best cascade with the maximum flow of the enriched purified product is M*-cascade with key components 232,236U.

  1. Performance on paced serial addition tasks indicates an associative network for calculation.

    PubMed

    Hiscock, M; Caroselli, J S; Kimball, L E; Panwar, N

    2001-06-01

    Although paced serial addition (PSA) tasks are considered to be tests of general information-processing capacity, recent work suggests that performance on such tasks is influenced by arithmetic-specific variables. We designed two visual PSA experiments to determine whether the performance of normal adults would support predictions derived from the cognitive psychology of calculation. Experiment 1 showed that mixing familiar (Arabic numeral) and less familiar (Roman numeral) stimulus formats reduced scores below the averaged scores for pure Arabic and Roman lists. The Roman-Arabic order of addends was more difficult than the Arabic-Roman order. Experiment 2, which involved only Arabic numerals as addends, showed that performance could be impaired by constraining the trial-to-trial variability of sums. The results of both experiments confirm the importance of arithmetic-specific variables in PSA and provide support for an associative network model of calculation. In addition, the findings implicate interference from extraneous addends and responses as the performance-limiting factor. PMID:11404809

  2. Children Show Heightened Memory for Threatening Social Actions

    ERIC Educational Resources Information Center

    Baltazar, Nicole C.; Shutts, Kristin; Kinzler, Katherine D.

    2012-01-01

    Three experiments investigated whether a negativity bias in social perception extends to preschool-aged children's memory for the details of others' social actions and experiences. After learning about individuals who committed nice or mean social actions, children in Experiment 1 were more accurate at remembering who was mean compared with who…

  3. Nitrogen Addition Enhances Drought Sensitivity of Young Deciduous Tree Species.

    PubMed

    Dziedek, Christoph; Härdtle, Werner; von Oheimb, Goddert; Fichtner, Andreas

    2016-01-01

    Understanding how trees respond to global change drivers is central to predict changes in forest structure and functions. Although there is evidence on the mode of nitrogen (N) and drought (D) effects on tree growth, our understanding of the interplay of these factors is still limited. Simultaneously, as mixtures are expected to be less sensitive to global change as compared to monocultures, we aimed to investigate the combined effects of N addition and D on the productivity of three tree species (Fagus sylvatica, Quercus petraea, Pseudotsuga menziesii) in relation to functional diverse species mixtures using data from a 4-year field experiment in Northwest Germany. Here we show that species mixing can mitigate the negative effects of combined N fertilization and D events, but the community response is mainly driven by the combination of certain traits rather than the tree species richness of a community. For beech, we found that negative effects of D on growth rates were amplified by N fertilization (i.e., combined treatment effects were non-additive), while for oak and fir, the simultaneous effects of N and D were additive. Beech and oak were identified as most sensitive to combined N+D effects with a strong size-dependency observed for beech, suggesting that the negative impact of N+D becomes stronger with time as beech grows larger. As a consequence, the net biodiversity effect declined at the community level, which can be mainly assigned to a distinct loss of complementarity in beech-oak mixtures. This pattern, however, was not evident in the other species-mixtures, indicating that neighborhood composition (i.e., trait combination), but not tree species richness mediated the relationship between tree diversity and treatment effects on tree growth. Our findings point to the importance of the qualitative role ('trait portfolio') that biodiversity play in determining resistance of diverse tree communities to environmental changes. As such, they provide further

  4. Genes Translocated into the Plastid Inverted Repeat Show Decelerated Substitution Rates and Elevated GC Content.

    PubMed

    Li, Fay-Wei; Kuo, Li-Yaung; Pryer, Kathleen M; Rothfels, Carl J

    2016-01-01

    Plant chloroplast genomes (plastomes) are characterized by an inverted repeat (IR) region and two larger single copy (SC) regions. Patterns of molecular evolution in the IR and SC regions differ, most notably by a reduced rate of nucleotide substitution in the IR compared to the SC region. In addition, the organization and structure of plastomes is fluid, and rearrangements through time have repeatedly shuffled genes into and out of the IR, providing recurrent natural experiments on how chloroplast genome structure can impact rates and patterns of molecular evolution. Here we examine four loci (psbA, ycf2, rps7, and rps12 exon 2-3) that were translocated from the SC into the IR during fern evolution. We use a model-based method, within a phylogenetic context, to test for substitution rate shifts. All four loci show a significant, 2- to 3-fold deceleration in their substitution rate following translocation into the IR, a phenomenon not observed in any other, nontranslocated plastid genes. Also, we show that after translocation, the GC content of the third codon position and of the noncoding regions is significantly increased, implying that gene conversion within the IR is GC-biased. Taken together, our results suggest that the IR region not only reduces substitution rates, but also impacts nucleotide composition. This finding highlights a potential vulnerability of correlating substitution rate heterogeneity with organismal life history traits without knowledge of the underlying genome structure. PMID:27401175

  5. Genes Translocated into the Plastid Inverted Repeat Show Decelerated Substitution Rates and Elevated GC Content

    PubMed Central

    Li, Fay-Wei; Kuo, Li-Yaung; Pryer, Kathleen M.; Rothfels, Carl J.

    2016-01-01

    Plant chloroplast genomes (plastomes) are characterized by an inverted repeat (IR) region and two larger single copy (SC) regions. Patterns of molecular evolution in the IR and SC regions differ, most notably by a reduced rate of nucleotide substitution in the IR compared to the SC region. In addition, the organization and structure of plastomes is fluid, and rearrangements through time have repeatedly shuffled genes into and out of the IR, providing recurrent natural experiments on how chloroplast genome structure can impact rates and patterns of molecular evolution. Here we examine four loci (psbA, ycf2, rps7, and rps12 exon 2–3) that were translocated from the SC into the IR during fern evolution. We use a model-based method, within a phylogenetic context, to test for substitution rate shifts. All four loci show a significant, 2- to 3-fold deceleration in their substitution rate following translocation into the IR, a phenomenon not observed in any other, nontranslocated plastid genes. Also, we show that after translocation, the GC content of the third codon position and of the noncoding regions is significantly increased, implying that gene conversion within the IR is GC-biased. Taken together, our results suggest that the IR region not only reduces substitution rates, but also impacts nucleotide composition. This finding highlights a potential vulnerability of correlating substitution rate heterogeneity with organismal life history traits without knowledge of the underlying genome structure. PMID:27401175

  6. Selection of appropriate organic additives for enhancing Zn and Cd phytoextraction by hyperaccumulators.

    PubMed

    Wu, Qi-tang; Deng, Jin-chuan; Long, Xin-xian; Morel, Jean-louis; Schwartz, Christophe

    2006-01-01

    Chelant-enhanced phytoextraction is one of the most promising technologies to remove heavy metals from soil. The key of the technology is to choose suitable additives in combination with a suitable plant. In the present study, laboratory batch experiment of metal solubilization, cress seeds germination were undertaken to investigate the metal-mobilizing capability and the phytotoxicity of organic additives, including ethylene diamine triacetic acid (EDTA), citric acid, acetic acid, oxalic acid, glutamine and monosodium glutamate waste liquid (MGWL) from food industry. Experiments in pots were carried out to study the effects of the additives on Zn and Cd phytoextraction. Furthermore, a leaching experiment with lysimeter was performed to evaluate the environmental risks of additive-induced leaching to underground water. The results showed that EDTA had a strong mobilizing ability for Zn and Cd, followed by mixed reagent (MR) and MGWL. MGWL and acetic acid at 5 mmol equivalent per liter resulted in seed germination index less than 2%. Experiments in pots verified the phytotoxicity of acetic acid and MGWL. Addition of the mixed reagent at 6-10 mmol/kg significantly increased Zn phytoextraction by Thlaspi caerulescens. The same for EDTA and the mixed reagent at 10 mmol/kg by Sedum alfredii. But only mixed reagents could significantly increase Cd phytoextraction by the studied hyperaccumulators. This suggested that the strong chelant was not always the good agent to enhance phytoextraction. S. alfredii combined with 2-10 mmol/kg soil MR was preferred for phytoremediation of Cd/Zn contaminated soils in southern China, this could result in high phytoextraction of Cd/Zn and reduce the leaching risk to underground water than EDTA assisted phytoextration.

  7. Written debriefing: Evaluating the impact of the addition of a written component when debriefing simulations.

    PubMed

    Reed, Shelly J

    2015-11-01

    Debriefing, the reflective period following a simulation, is said to be where the bulk of simulation learning takes place. Many expert opinions regarding debriefing exist, but evidence-based best practices have yet to be identified. Written debriefing is one of these practices; experts state learning can be extended through the addition of a written component to the debriefing process, but no evidence exists to support this. This study compares three debriefing types: discussion alone, and discussion followed by journaling or blogging. Undergraduate nursing students participating in a simulation were randomized as a simulation group to one of these three debriefing types. Following completion of debriefing activities, students completed a Debriefing Experience Scale, a tool designed to evaluate the student experience during debriefing. Data obtained from completed scales were analyzed with ANOVA followed by Fisher LSD post hoc testing. The results showed the students preferred their experience with discussion debriefing over discussion debriefing with a written component added.

  8. Investigation of the Tribology Behaviors of Auto-Restoration Additive Under Heavy Loading Conditions

    NASA Astrophysics Data System (ADS)

    Xu, Jiang; Wang, Feng; Liu, Zili

    Lubricant additives are crucial in minimizing friction and wear, and protecting surfaces under severe contact condition. The traditional additive can only diminish the wear rate of materials by increasing the sliding distance. As a wear-self-compensation lubricating additive, the auto-restoration technology (ART) of worn surface of metals is a novel technique for the repair of mechanical equipment and breakthrough of tribology theory that cannot obey the traditional law. The previous experiments have measured the friction and wear behaviors of ART additives under low load conditions. This paper presents the tribology behaviors of auto-restoration lubricating additive under heavily loaded condition. The results show that the auto-restoration lubricating additive can reduce pronouncedly the frictional coefficient and wear weight; after 6 h wear examination the friction coefficient is only 0.027. The morphology of the worn surface and the chemical composition of tribofilm have been observed by SEM. It proved that the worn surface is very smooth and there exists a tribochemical reaction between the metal and the auto-restoration lubricating additive.

  9. Low LET protons focused to submicrometer shows enhanced radiobiological effectiveness.

    PubMed

    Schmid, T E; Greubel, C; Hable, V; Zlobinskaya, O; Michalski, D; Girst, S; Siebenwirth, C; Schmid, E; Molls, M; Multhoff, G; Dollinger, G

    2012-10-01

    This study shows that enhanced radiobiological effectiveness (RBE) values can be generated focusing low linear energy transfer (LET) radiation and thus changing the microdose distribution. 20 MeV protons (LET = 2.65 keV µm(-1)) are focused to submicrometer diameter at the ion microprobe superconducting nanoprobe for applied nuclear (Kern) physics experiments of the Munich tandem accelerator. The RBE values, as determined by measuring micronuclei (RBE(MN) = 1.48 ± 0.07) and dicentrics (RBE(D) = 1.92 ± 0.15), in human-hamster hybrid (A(L)) cells are significantly higher when 117 protons were focused to a submicrometer irradiation field within a 5.4 × 5.4 µm(2) matrix compared to quasi homogeneous in a 1 × 1 µm(2) matrix applied protons (RBE(MN) = 1.28 ± 0.07; RBE(D) = 1.41 ± 0.14) at the same average dose of 1.7 Gy. The RBE values are normalized to standard 70 kV (dicentrics) or 200 kV (micronuclei) x-ray irradiation. The 117 protons applied per point deposit the same amount of energy like a (12)C ion with 55 MeV total energy (4.48 MeV u(-1)). The enhancements are about half of that obtained for (12)C ions (RBE(MN) = 2.20 ± 0.06 and RBE(D) = 3.21 ± 0.10) and they are attributed to intertrack interactions of the induced damages. The measured RBE values show differences from predictions of the local effect model (LEM III) that is used to calculate RBE values for irradiation plans to treat tumors with high LET particles.

  10. Rapid Recovery of Cyanobacterial Pigments in Desiccated Biological Soil Crusts following Addition of Water

    PubMed Central

    Abed, Raeid M. M.; Polerecky, Lubos; Al-Habsi, Amal; Oetjen, Janina; Strous, Marc; de Beer, Dirk

    2014-01-01

    We examined soil surface colour change to green and hydrotaxis following addition of water to biological soil crusts using pigment extraction, hyperspectral imaging, microsensors and 13C labeling experiments coupled to matrix-assisted laser desorption and ionization time of flight-mass spectrometry (MALD-TOF MS). The topsoil colour turned green in less than 5 minutes following water addition. The concentrations of chlorophyll a (Chl a), scytonemin and echinenon rapidly increased in the top <1 mm layer while in the deeper layer, their concentrations remained low. Hyperspectral imaging showed that, in both wet and dehydrated crusts, cyanobacteria formed a layer at a depth of 0.2–0.4 mm and this layer did not move upward after wetting. 13C labeling experiments and MALDI TOF analysis showed that Chl a was already present in the desiccated crusts and de novo synthesis of this molecule started only after 2 days of wetting due to growth of cyanobacteria. Microsensor measurements showed that photosynthetic activity increased concomitantly with the increase of Chl a, and reached a maximum net rate of 92 µmol m−2 h−1 approximately 2 hours after wetting. We conclude that the colour change of soil crusts to green upon water addition was not due to hydrotaxis but rather to the quick recovery and reassembly of pigments. Cyanobacteria in crusts can maintain their photosynthetic apparatus intact even under prolonged periods of desiccation with the ability to resume their photosynthetic activities within minutes after wetting. PMID:25375172

  11. Development of new peat based growing media by addition of pruning waste and biochars

    NASA Astrophysics Data System (ADS)

    Nieto, Aurora; Gascó, Gabriel; Paz-Ferreiro, Jorge; Plaza, César; Fernández, José Manuel; Méndez, Ana

    2015-04-01

    In the last years, several researches have been performed to find high quality and low cost substrates from different organic wastes in order to decrease peat consumption since the indiscriminate exploitation of peat lands is exhausting this non-renewable useful resource and destroying endangered wetland ecosystems worldwide. The use of organic wastes as soil amendments or possible peat substitute could be improved by pyrolysis treatment, leading to biochar, a carbon-rich material that has attached important attention. Our research group has been worked in the formulation of new based-growing media by peat substitution in 50 and 75 vol% of pruning waste (PW), commercial charcoal (CC), biochar from PW at 300°C (B300) and 500°C (B500). Growing media show adequate physicochemical and hydrophysical properties. Experiments performed with lettuce germination show that PW addition in a 75vol% reduces germination index probably due to their high content on phenolic compounds. Lettuce growing experiments were performed during 5 weeks and show that addition of PW and CC to peat decreases biomass production whereas; B300 and specially, B500 addition significantly increases the lettuce biomass.

  12. Electric utility use of fireside additives. Final report

    SciTech Connect

    Locklin, D.W.; Krause, H.H.; Anson, D.; Reid, W.

    1980-01-01

    Fireside additives have been used or proposed for use in fossil-fired utility boilers to combat a number of problems related to boiler performance and reliability. These problems include corrosion, fouling, superheat control, and acidic emissions. Fuel additivies and other fireside additives have been used mainly with oil firing; however, there is growing experience with additives in coal-firing, especially for flyash conditioning to improve the performance of electrostatic precipitators. In decisions regarding the selection and use of additives, utilities have had to rely extensively on empiricism, due partly to our incomplete understanding of processes involved and partly to the limited amount of quantitative data. The study reported here was sponsored by the Electric Power Research Institute to assemble and analyze pertinent operating experience and to recommend guidelines for utility decisions on the use of additives. This report describes the combined results of the state-of-the-art review of technical literature and a special survey of utility experience. A total of 38 utilities participated in the survey, providing information on trials conducted on 104 units in 93 different plants. Altogether, 445 separate trials were reported, each representing a unit/additive/fuel combination. 90 different additive formulations, both pure compounds and proprietary products, were categorized into 37 generic classes according to their chemical constituents, and the results of the survey are presented by these generic classes. This report is organized according to the operating problems for which fireside additives are used. Guidelines are presented for utility use in additive selection and in planning additive trials.

  13. Rosmarinic acid from eelgrass shows nematicidal and antibacterial activities against pine wood nematode and its carrying bacteria.

    PubMed

    Wang, Jingyu; Pan, Xueru; Han, Yi; Guo, Daosen; Guo, Qunqun; Li, Ronggui

    2012-12-01

    Pine wilt disease (PWD), a destructive disease for pine trees, is caused by the pine wood nematode (PWN), Bursaphelenchus xylophilus and additional bacteria. In this study, extracts of Zostera marina showed a high nematicidal activity against PWN and some of the bacteria that it carries. Light yellow crystals were obtained from extracts of Z. marina through solvent extraction, followed by chromatography on AB-8 resin and crystallization. The NMR and HPLC analysis showed that the isolated compound was rosmarinic acid (RosA). RosA showed effective nematicidal activity, of which the LC₅₀ (50% lethal concentration) to PWN at 24 h, 48 h and 72 h was 1.18 mg/g, 1.05 mg/g and 0.95 mg/g, respectively. To get a high yield rate of RosA from Z. marina, single factor experiments and an L₉ (3⁴) orthogonal experiment were performed. This extraction process involved 70% ethanol for 3 h at 40 °C. The extraction dosage was 1:50 (w/v). The highest yield of RosA from Zostera was 3.13 mg/g DW (dried weight). The crude extracts of Zostera marina (10 mg/mL) and RosA (1 mg/mL) also showed inhibitory effects to some bacterial strains carried by PWN: Klebsiella sp., Stenotrophomonas maltophilia, Streptomyces sp. and Pantoea agglomerans. The results of these studies provide clues for preparing pesticide to control PWD from Z. marina. PMID:23201594

  14. Rosmarinic acid from eelgrass shows nematicidal and antibacterial activities against pine wood nematode and its carrying bacteria.

    PubMed

    Wang, Jingyu; Pan, Xueru; Han, Yi; Guo, Daosen; Guo, Qunqun; Li, Ronggui

    2012-12-01

    Pine wilt disease (PWD), a destructive disease for pine trees, is caused by the pine wood nematode (PWN), Bursaphelenchus xylophilus and additional bacteria. In this study, extracts of Zostera marina showed a high nematicidal activity against PWN and some of the bacteria that it carries. Light yellow crystals were obtained from extracts of Z. marina through solvent extraction, followed by chromatography on AB-8 resin and crystallization. The NMR and HPLC analysis showed that the isolated compound was rosmarinic acid (RosA). RosA showed effective nematicidal activity, of which the LC₅₀ (50% lethal concentration) to PWN at 24 h, 48 h and 72 h was 1.18 mg/g, 1.05 mg/g and 0.95 mg/g, respectively. To get a high yield rate of RosA from Z. marina, single factor experiments and an L₉ (3⁴) orthogonal experiment were performed. This extraction process involved 70% ethanol for 3 h at 40 °C. The extraction dosage was 1:50 (w/v). The highest yield of RosA from Zostera was 3.13 mg/g DW (dried weight). The crude extracts of Zostera marina (10 mg/mL) and RosA (1 mg/mL) also showed inhibitory effects to some bacterial strains carried by PWN: Klebsiella sp., Stenotrophomonas maltophilia, Streptomyces sp. and Pantoea agglomerans. The results of these studies provide clues for preparing pesticide to control PWD from Z. marina.

  15. Psychology Experiments.

    ERIC Educational Resources Information Center

    McGraw, Ken; Tew, Mark D.; Williams, John E.

    2001-01-01

    A goal of the PsychExperiments project was to reduce the financial burden on psychology departments for hardware/software used in their laboratories. In its third year, the PsychExperiments site now hosts 39 experiments. Over 200 classrooms worldwide have signed up as official site users and there have been nearly 10,000 data sessions conducted.…

  16. A New Attempt at Alkaline Texturization of Monocrystaline Silicon with Anionic Surfactant as the Additive

    NASA Astrophysics Data System (ADS)

    Li, Hailing; Wang, Wenjing; Zhao, Lei; Zhou, Chunlan; Diao, Hongwei

    2012-10-01

    Owing to the volatilization of isopropanol (IPA), instability in the alkaline texturization of monocrystalline silicon has been a big problem for a long time. Many additives were adapted to replace IPA, such as high boiling point alcohols. In this experiment, as a new attempt, sodium lauryl sulfate (SDS), a type of anionic surfactant, was used as the additive in NaOH solution. The etching properties of silicon in 2 wt % NaOH/15-30 mg/L SDS solution were analyzed. To improve the wettability of silicon, two types of metal salt, NaCl and Na2CO3 with concentration from 2 to 15 wt %, were applied to the 2 wt % NaOH/15 mg/L SDS solution. The results showed that the effect of NaCl was better than that of Na2CO3. Finally, the role of the additive was discussed.

  17. [Effects of nitrogen addition on soil physico-chemical properties and enzyme activities in desertified steppe].

    PubMed

    Su, Jie-Qiong; Li, Xin-Rong; Bao, Jing-Ting

    2014-03-01

    To investigate the impacts of nitrogen (N) enrichment on soil physico-chemical property and soil enzyme activities in desert ecosystems, a field experiment by adding N at 0, 1.75, 3.5, 7, or 14 g N x m(-2) a(-1) was conducted in a temperate desert steppe in the southeastern fringe of the Tengger Desert. The results showed that N addition led to accumulations of total N, NO(3-)-N, NH(4+)-N, and available N in the upper soil (0-10 cm) and subsoil (10-20 cm), however, reductions in soil pH were observed, causing soil acidification to some extent. N addition pronouncedly inhibited soil enzyme activities, which were different among N addition levels, soil depths, and years, respectively. Soil enzyme activities were significantly correlated with the soil N level, soil pH, and soil moisture content, respectively.

  18. Prognosis of oocytes showing aggregation of smooth endoplasmic reticulum.

    PubMed

    Ebner, Thomas; Moser, Marianne; Shebl, Omar; Sommerguber, Michael; Tews, Gernot

    2008-01-01

    Few cytoplasmic dysmorphisms of oocytes have been reported to negatively influence the further fate of the ova. One such anomaly, namely the central aggregation of the smooth endoplasmic reticulum (SER), has recently been associated with suboptimal outcome in a limited number of patients. In order to increase prognostic value, it was decided to prospectively screen all intracytoplasmic sperm injection patients within 1 year for eggs showing aggregations of SER. In addition, all deliveries (obstetric and neonatal data) were analysed. Occurrence of SER cluster was related to duration (P < 0.001) and dosage (P < 0.01) of the stimulation. Fertilization (58.9%) and blastulation rate (44.0%) were lower (P < 0.01) in affected ova compared with unaffected counterparts (77.4 and 87.8%, respectively). Pregnancies in women with affected gametes were accompanied by a higher incidence of obstetric problems (P < 0.01) leading to a non-significant trend towards earlier delivery and significantly reduced birthweight (P < 0.05). It is strongly recommended to avoid transfer of embryos/blastocysts derived from SER cluster-positive gametes. Patients have to be informed that even transfer of sibling oocytes without this anomaly involves a higher risk of detrimental outcome.

  19. Ultrasonic frogs show hyperacute phonotaxis to female courtship calls.

    PubMed

    Shen, Jun-Xian; Feng, Albert S; Xu, Zhi-Min; Yu, Zu-Lin; Arch, Victoria S; Yu, Xin-Jian; Narins, Peter M

    2008-06-12

    Sound communication plays a vital role in frog reproduction, in which vocal advertisement is generally the domain of males. Females are typically silent, but in a few anuran species they can produce a feeble reciprocal call or rapping sounds during courtship. Males of concave-eared torrent frogs (Odorrana tormota) have demonstrated ultrasonic communication capacity. Although females of O. tormota have an unusually well-developed vocal production system, it is unclear whether or not they produce calls or are only passive partners in a communication system dominated by males. Here we show that before ovulation, gravid females of O. tormota emit calls that are distinct from males' advertisement calls, having higher fundamental frequencies and harmonics and shorter call duration. In the field and in a quiet, darkened indoor arena, these female calls evoke vocalizations and extraordinarily precise positive phonotaxis (a localization error of <1 degrees ), rivalling that of vertebrates with the highest localization acuity (barn owls, dolphins, elephants and humans). The localization accuracy of O. tormota is remarkable in light of their small head size (interaural distance of <1 cm), and suggests an additional selective advantage of high-frequency hearing beyond the ability to avoid masking by low-frequency background noise. PMID:18469804

  20. HUBBLE PICTURES SHOW HOT GAS BUBBLE EJECTED BY YOUNG STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    These images taken with the Hubble Space Telescope's Wide Field and Planetary Camera 2 reveal the evolution of bubbles of glowing gas being blown out from the young binary star system XZ Tauri. Gas from an unseen disk around one or both of the stars is channeled through magnetic fields surrounding the binary system and then is forced out into space at nearly 300,000 miles per hour (540,000 kilometers per hour). This outflow, which is only about 30 years old, extends nearly 60 billion miles (96 billion kilometers). Hubble first discovered this unique bubble in 1995, and additional observations were made between 1998 and 2000. These images show that there was a dramatic change in its appearance between 1995 and 1998. In 1995, the bubble's edge was the same brightness as its interior. However, when Hubble took another look at XZ Tauri in 1998, the edge was suddenly brighter. This brightening is probably caused by the hot gas cooling off, which allows electrons in the gas to recombine with atoms, a process that gives off light. This is the first time that astronomers have seen such a cooling zone 'turn on.' These images provide an unprecedented opportunity to study the development of a very recent outflow from young (about 1 million years old) stars. Credits: NASA, John Krist (Space Telescope Science Institute), Karl Stapelfeldt (Jet Propulsion Laboratory), Jeff Hester (Arizona State University), Chris Burrows (European Space Agency/Space Telescope Science Institute)

  1. Satellite signal shows storage-unloading subsidence in North China

    NASA Astrophysics Data System (ADS)

    Moiwo, J. P.; Tao, F.

    2015-06-01

    Worsening water storage depletion (WSD) contributes to environmental degradation, land subsidence and earthquake and could disrupt food production/security and social stability. There is need for efficient water use strategies in North China, a pivotal agrarian, industrial and political base in China with a widespread WSD. This study integrates satellite, model and field data products to investigate WSD and land subsidence in North China. In the first step, GRACE (Gravity Recovery and Climate Experiment) mass rates are used to show WSD in the region. Next, GRACE total water storage (TWS) is corrected for soil water storage (SWS) to derive groundwater storage (GWS) using GLDAS (Global Land Data Assimilation System) data products. The derived GWS is compared with GWS obtained from field-measured groundwater level to show land subsidence in the study area. Then GPS (Global Positioning System) data of relative land surface change (LSC) are used to confirm the subsidence due to WSD. A total of ~ 96 near-consecutive months (January 2002 through December 2009) of datasets are used in the study. Based on GRACE mass rates, TWS depletion is 23.76 ± 1.74 mm yr-1 or 13.73 ± 1.01 km3 yr-1 in the 578 000 km2 study area. This is ~ 31 % of the slated 45 km3 yr-1 water delivery in 2050 via the South-North Water Diversion Project. Analysis of relative LSC shows subsidence of 7.29 ± 0.35 mm yr-1 in Beijing and 2.74 ± 0.16 mm yr-1 in North China. About 11.53 % (2.74 ± 0.18 mm or 1.58 ± 0.12 km3) of the TWS and 8.37 % (1.52 ± 0.70 mm or 0.88 ± 0.03 km3) of the GWS are attributed to storage reductions accompanying subsidence in the region. Although interpretations of the findings require caution due to the short temporal and large spatial coverage, the concurrence of WSD and land subsidence could have adverse implications for the study area. It is critical that the relevant stakeholders embark on resource-efficient measures to ensure water availability, food security, ecological

  2. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  3. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  4. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  5. Performance of seedlings of a shade-tolerant tropical tree species after moderate addition of N and P

    NASA Astrophysics Data System (ADS)

    Cárate Tandalla, Daisy; Leuschner, Christoph; Homeier, Jürgen

    2015-12-01

    Nitrogen deposition to tropical forests is predicted to increase in future in many regions due to agricultural intensification. We conducted a seedling transplantation experiment in a tropical premontane forest in Ecuador with a locally abundant late-successional tree species (Pouteria torta, Sapotaceae) aimed at detecting species-specific responses to moderate N and P addition and to understand how increasing nutrient availability will affect regeneration. From locally collected seeds, 320 seedlings were produced and transplanted to the plots of the Ecuadorian Nutrient Manipulation Experiment (NUMEX) with three treatments (moderate N addition: 50 kg N ha-1 yr-1, moderate P addition: 10 kg P ha-1 yr-1 and combined N and P addition) and a control (80 plants per treatment). After 12 months, mortality, relative growth rate, leaf nutrient content and leaf herbivory rate were measured. N and NP addition significantly increased the mortality rate (70 % vs. 54 % in the control). However, N and P addition also increased the diameter growth rate of the surviving seedlings. N and P addition did not alter foliar nutrient concentrations and leaf N:P ratio, but N addition decreased the leaf C:N ratio and increased SLA. P addition (but not N addition) resulted in higher leaf area loss to herbivore consumption and also shifted carbon allocation to root growth. This fertilization experiment with a common rainforest tree species conducted in old-growth forest shows that already moderate doses of added N and P are affecting seedling performance which most likely will have consequences for the competitive strength in the understory and the recruitment success of P. torta. Simultaneous increases in growth, herbivory and mortality rates make it difficult to assess the species' overall performance and predict how a future increase in nutrient deposition will alter the abundance of this species in the Andean tropical montane forests.

  6. Benefits of additives application during combustion of phytomass

    NASA Astrophysics Data System (ADS)

    Palacka, Matej; Vician, Peter; Holubčík, Michal; Jandačka, Jozef

    2016-06-01

    Phytomass, particularly wheat straw as a source of energy has countless benefits, but it has many problems in its direct burn too. The worst problem is the ash flow temperature. The aim of study was to analyze and reduce the problems of the wheat straw combustion. The experiment was conducted under realistic conditions. In this paper was implemented analysis of ash features with and without adding additives into the wheat straw. Selected samples were laboratory processed and examined. The result of the work was the impact of additional additives for ash features.

  7. Mechanical properties of additively manufactured octagonal honeycombs.

    PubMed

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs. PMID:27612831

  8. Mechanical properties of additively manufactured octagonal honeycombs.

    PubMed

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs.

  9. Surface tension increment due to solute addition

    NASA Astrophysics Data System (ADS)

    Hsin, Wei Lun; Sheng, Yu-Jane; Lin, Shi-Yow; Tsao, Heng-Kwong

    2004-03-01

    Addition of solute into solvent may lead to an increase in surface tension, such as salt in water and water in alcohol, due to solute depletion at the interface. The repulsion of the solute from the interface may originate from electrostatic forces or solute-solvent attraction. On the basis of the square-well model for the interface-solute interaction, we derive the surface tension increment Δγ by both canonical and grand-canonical routes (Gibbs adsorption isotherm) for a spherical droplet. The surface tension is increased linearly with the bulk concentration of the solute cb and the interaction range λ. The theoretical results are consistent with those obtained by experiments and Monte Carlo simulations up to a few molarity. For weak repulsion, the increment is internal energy driven. When the repulsion is large enough, the surface tension increment is entropy driven and approaches the asymptotic limit, Δγ≃cbkBTλ, due to the nearly complete depletion of the solute at the interface. Our result may shed some light on the surface tension increment for electrolyte solutions with concentration above 0.2M.

  10. IN718 Additive Manufacturing Properties and Influences

    NASA Technical Reports Server (NTRS)

    Lambert, Dennis M.

    2015-01-01

    The results of tensile, fracture, and fatigue testing of IN718 coupons produced using the selective laser melting (SLM) additive manufacturing technique are presented. The data has been "generalized" to remove the numerical values, although certain references to material standards are provided. This document provides some knowledge of the effect of variation of controlled build parameters used in the SLM process, a snapshot of the capabilities of SLM in industry at present, and shares some of the lessons learned along the way. For the build parameter characterization, the parameters were varied over a range about the machine manufacturer's recommended value, and in each case they were varied individually, although some co-variance of those parameters would be expected. SLM-produced IN718, tensile, fracture, and high-cycle fatigue properties equivalent to wrought IN718 are achievable. Build and post-build processes need to be determined and then controlled to established limits to accomplish this. It is recommended that a multi-variable evaluation, e.g., design-of-experiment (DOE), of the build parameters be performed to better evaluate the co-variance of the parameters.

  11. Computational Process Modeling for Additive Manufacturing (OSU)

    NASA Technical Reports Server (NTRS)

    Bagg, Stacey; Zhang, Wei

    2015-01-01

    Powder-Bed Additive Manufacturing (AM) through Direct Metal Laser Sintering (DMLS) or Selective Laser Melting (SLM) is being used by NASA and the Aerospace industry to "print" parts that traditionally are very complex, high cost, or long schedule lead items. The process spreads a thin layer of metal powder over a build platform, then melts the powder in a series of welds in a desired shape. The next layer of powder is applied, and the process is repeated until layer-by-layer, a very complex part can be built. This reduces cost and schedule by eliminating very complex tooling and processes traditionally used in aerospace component manufacturing. To use the process to print end-use items, NASA seeks to understand SLM material well enough to develop a method of qualifying parts for space flight operation. Traditionally, a new material process takes many years and high investment to generate statistical databases and experiential knowledge, but computational modeling can truncate the schedule and cost -many experiments can be run quickly in a model, which would take years and a high material cost to run empirically. This project seeks to optimize material build parameters with reduced time and cost through modeling.

  12. IN718 Additive Manufacturing Properties and Influences

    NASA Technical Reports Server (NTRS)

    Lambert, Dennis M.

    2015-01-01

    The results of tensile, fracture, and fatigue testing of IN718 coupons produced using the selective laser melting (SLM) additive manufacturing technique are presented. The data have been "sanitized" to remove the numerical values, although certain references to material standards are provided. This document provides some knowledge of the effect of variation of controlled build parameters used in the SLM process, a snapshot of the capabilities of SLM in industry at present, and shares some of the lessons learned along the way. For the build parameter characterization, the parameters were varied over a range that was centered about the machine manufacturer's recommended value, and in each case they were varied individually, although some co-variance of those parameters would be expected. Tensile, fracture, and high-cycle fatigue properties equivalent to wrought IN718 are achievable with SLM-produced IN718. Build and post-build processes need to be determined and then controlled to established limits to accomplish this. It is recommended that a multi-variable evaluation, e.g., design-of experiment (DOE), of the build parameters be performed to better evaluate the co-variance of the parameters.

  13. On the Poggendorff Experiment

    ERIC Educational Resources Information Center

    Coelho, Ricardo Lopes; Silva, P. A. S.; Borges, Paulo de Faria

    2015-01-01

    Poggendorff showed experimentally, in the middle of the 19th century, that the weight of an Atwood machine is reduced when it is brought to motion. His experiment has been revisited from time to time, making use of instrumentation that reflects the technological development of the moment. In this paper, the evolution of the experiment is briefly…

  14. The Jumping Ring Experiment

    ERIC Educational Resources Information Center

    Baylie, M.; Ford, P. J.; Mathlin, G. P.; Palmer, C.

    2009-01-01

    The jumping ring experiment has become central to liquid nitrogen shows given as part of the outreach and open day activities carried out within the University of Bath. The basic principles of the experiment are described as well as the effect of changing the geometry of the rings and their metallurgical state. In general, aluminium rings are…

  15. Mental addition in bilinguals: an FMRI study of task-related and performance-related activation.

    PubMed

    Lin, Jo-Fu Lotus; Imada, Toshiaki; Kuhl, Patricia K

    2012-08-01

    Behavioral studies show that bilinguals are slower and less accurate when performing mental calculation in their nondominant (second; L2) language than in their dominant (first; L1) language. However, little is known about the neural correlates associated with the performance differences observed between bilinguals' 2 languages during arithmetic processing. To address the cortical activation differences between languages, the current study examined task-related and performance-related brain activation during mental addition when problems were presented auditorily in participants' L1 and L2. Eleven Chinese-English bilinguals heard 2-digit addition problems that required exact or approximate calculations. Functional magnetic resonance imaging results showed that auditorily presented multidigit addition in bilinguals activates bilateral inferior parietal and inferior frontal regions in both L1 and L2. Language differences were observed in the form of greater activation for L2 exact addition in the left inferior frontal area. A negative correlation between brain activation and behavioral performance during mental addition in L2 was observed in the left inferior parietal area. Current results provide further evidence for the effects of language-specific experience on arithmetic processing in bilinguals at the cortical level.

  16. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  17. Printability of alloys for additive manufacturing.

    PubMed

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  18. Object attributes combine additively in visual search.

    PubMed

    Pramod, R T; Arun, S P

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes. PMID:26967014

  19. Printability of alloys for additive manufacturing

    PubMed Central

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  20. Object attributes combine additively in visual search

    PubMed Central

    Pramod, R. T.; Arun, S. P.

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes. PMID:26967014

  1. Printability of alloys for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Zuback, J. S.; de, A.; Debroy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  2. Printability of alloys for additive manufacturing.

    PubMed

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  3. Printability of alloys for additive manufacturing

    DOE PAGES

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is usedmore » to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.« less

  4. 21 CFR 70.42 - Criteria for evaluating the safety of color additives.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... experiments to determine its safety, the Commissioner will advise a person who wishes to establish the safety of a color additive whether he believes the experiments planned will yield data adequate for...

  5. Storage Ring EDM Experiments

    NASA Astrophysics Data System (ADS)

    Semertzidis, Yannis K.

    2016-04-01

    Dedicated storage ring electric dipole moment (EDM) methods show great promise advancing the sensitivity level by a couple orders of magnitude over currently planned hadronic EDM experiments. We describe the present status and recent updates of the field.

  6. Notes on Experiments.

    ERIC Educational Resources Information Center

    Physics Education, 1989

    1989-01-01

    Introduced are two experiments: radon detection method shows real data using vacuum cleaner, soft toilet paper, and Geiger-Muller tube; critical potentials measurement describes the operation of Teltron tube with VELA. (YP)

  7. Learning to Learn an Additional Language: A Personal Perspective

    ERIC Educational Resources Information Center

    Boyd, Lynda

    2009-01-01

    The purpose of this article is to describe the New Zealand experience of second language acquisition as it applies to learning the Maori language and also to new immigrants learning English. The article describes the te kohanga reo movement and also outlines the government policy as it relates to the learning of English as an additional language…

  8. Relativistic Velocity Addition Law from Machine Gun Analogy

    ERIC Educational Resources Information Center

    Rothenstein, Bernhard; Popescu, Stefan

    2009-01-01

    Many derivations of the relativistic addition law of parallel velocities without use of the Lorentz transformations (LT) are known. Some of them are based on thought experiments that require knowledge of the time dilation and the length contraction effects. Other derivations involve the Doppler effect in the optic domain considered from three…

  9. Optimal Multicomponent Analysis Using the Generalized Standard Addition Method.

    ERIC Educational Resources Information Center

    Raymond, Margaret; And Others

    1983-01-01

    Describes an experiment on the simultaneous determination of chromium and magnesium by spectophotometry modified to include the Generalized Standard Addition Method computer program, a multivariate calibration method that provides optimal multicomponent analysis in the presence of interference and matrix effects. Provides instructions for…

  10. 2. CONTEXT SHOWING NORTHWEST CORNER, WITH BUILDING S251 (AIRCRAFT MAINTENANCE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. CONTEXT SHOWING NORTHWEST CORNER, WITH BUILDING S251 (AIRCRAFT MAINTENANCE AND REPAIR SHOPS BUILDING ADDITION) IN FOREGROUND. - Loring Air Force Base, Arch Hangar, East of Arizona Road near southern end of runway, Limestone, Aroostook County, ME

  11. Effects of Roundup formulations, nutrient addition, and Western mosquitofish (Gambusia affinis) on aquatic communities.

    PubMed

    Geyer, Rebecca L; Smith, Geoffrey R; Rettig, Jessica E

    2016-06-01

    Aquatic communities can be affected by herbicides, nutrient addition, and non-native fish species. We conducted a mesocosm experiment to examine the direct and interactive effects of three stressors: (1) Roundup formulations (Roundup Weed and Grass Killer(®) and Roundup Poison Ivy and Tough Brush Killer Plus(®)), (2) nutrient addition, and (3) the presence of the non-native Western mosquitofish (Gambusia affinis), on experimental pond communities. Roundup formulations had the most widespread effects on the zooplankton community, but effects varied between formulations and among taxa. The only significant effect of nutrient addition was a lowering of Daphnia abundance in the nutrient addition treatments. The abundances of Daphnia, mid-sized cladocerans, and total zooplankton were lowered by mosquitofish, but no other taxa showed significant mosquitofish effects. We found several two-way and three-way interactions among the stressors, but these varied among zooplankton taxa. Chlorophyll a levels were higher with nutrient addition but were not significantly affected by Roundup formulation or mosquitofish. Our results suggest toxicity of Roundup formulations varies among taxa, and Roundup formulations differ in their toxicity to zooplankton, but with no cascading effects on primary producers. In addition, interactions among stressors affected the zooplankton community.

  12. Effects of Roundup formulations, nutrient addition, and Western mosquitofish (Gambusia affinis) on aquatic communities.

    PubMed

    Geyer, Rebecca L; Smith, Geoffrey R; Rettig, Jessica E

    2016-06-01

    Aquatic communities can be affected by herbicides, nutrient addition, and non-native fish species. We conducted a mesocosm experiment to examine the direct and interactive effects of three stressors: (1) Roundup formulations (Roundup Weed and Grass Killer(®) and Roundup Poison Ivy and Tough Brush Killer Plus(®)), (2) nutrient addition, and (3) the presence of the non-native Western mosquitofish (Gambusia affinis), on experimental pond communities. Roundup formulations had the most widespread effects on the zooplankton community, but effects varied between formulations and among taxa. The only significant effect of nutrient addition was a lowering of Daphnia abundance in the nutrient addition treatments. The abundances of Daphnia, mid-sized cladocerans, and total zooplankton were lowered by mosquitofish, but no other taxa showed significant mosquitofish effects. We found several two-way and three-way interactions among the stressors, but these varied among zooplankton taxa. Chlorophyll a levels were higher with nutrient addition but were not significantly affected by Roundup formulation or mosquitofish. Our results suggest toxicity of Roundup formulations varies among taxa, and Roundup formulations differ in their toxicity to zooplankton, but with no cascading effects on primary producers. In addition, interactions among stressors affected the zooplankton community. PMID:26944427

  13. [Effect of magnesium salt addition on nutrients conservation during swine manure composting].

    PubMed

    Yang, Yu; Wei, Yuan-song; Liu, Jun-xin

    2008-09-01

    Experiments were carried out to investigate the effect of magnesium chloride addition on nutrients conservation in the thermophilic stage of swine manure composting. The results indicated that in the end of thermophilic stage of composting, the ammonia nitrogen loss of the pile with Mg-salt addition was 24.25 g, reduced by 58%, compared with 56.60 g of the control. And the total nitrogen (TN) concentration of the pile with magnesium chloride addition was higher by 18% than that of the control pile. Sequential extraction phosphorus results showed that the total phosphorus (TP) in both piles were similar (14.2 g/kg TP of the pile with Mg-salt addition and 12.0 g/kg TP of the control). However, the addition of Mg-salt is helpful for conserving phosphorus in swine compost because the percentage of the easily dissolved phosphorous forms such as H2O-P and NaHCO3-P in the control was increased from 30% of TP to 60% of TP, compared with that maintained at 30% of TP in the pile with Mg-salt addition. Crystal mixture which includes magnesium phosphate were found in the pile of adding magnesium chloride.

  14. Non-additive and Additive Genetic Effects on Extraversion in 3314 Dutch Adolescent Twins and Their Parents

    PubMed Central

    Rebollo-Mesa, Irene; Hudziak, James J.; Willemsen, Gonneke; Boomsma, Dorret I.

    2012-01-01

    The influence of non-additive genetic influences on personality traits has been increasingly reported in adult populations. Less is known, however, with respect to younger samples. In this study, we examine additive and non-additive genetic contributions to the personality trait of extraversion in 1,689 Dutch twin pairs, 1,505 mothers and 1,637 fathers of the twins. The twins were on average 15.5 years (range 12–18 years). To increase statistical power to detect non-additive genetic influences, data on extraversion were also collected in parents and simultaneously analyzed. Genetic modeling procedures incorporating age as a potential modifier of heritability showed significant influences of additive (20–23%) and non-additive genetic factors (31–33%) in addition to unshared environment (46–48%) for adolescents and for their parents. The additive genetic component was slightly and positively related to age. No significant sex differences were found for either extraversion means or for the magnitude of the genetic and environmental influences. There was no evidence of non-random mating for extraversion in the parental generation. Results show that in addition to additive genetic influences, extraversion in adolescents is influenced by non-additive genetic factors. PMID:18240014

  15. 1. Building #3, original structure and first addition, north side, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Building #3, original structure and first addition, north side, looking south. Photo shows (from left) the original 1911 structure, the 1939 infill addition, and the 1934 structure. - S. W. Shattuck Chemical Company, Incorporated, Building No. 3, 1805 South Bannock Street, Denver, Denver County, CO

  16. Anomaly Detection In Additively Manufactured Parts Using Laser Doppler Vibrometery

    SciTech Connect

    Hernandez, Carlos A.

    2015-09-29

    Additively manufactured parts are susceptible to non-uniform structure caused by the unique manufacturing process. This can lead to structural weakness or catastrophic failure. Using laser Doppler vibrometry and frequency response analysis, non-contact detection of anomalies in additively manufactured parts may be possible. Preliminary tests show promise for small scale detection, but more future work is necessary.

  17. Experimenting model deconstruction

    NASA Astrophysics Data System (ADS)

    Seeger, Manuel; Wirtz, Stefan; Ali, Mazhar

    2013-04-01

    Physical soil erosion models describe erosion and transport of solids by flowing water as the interaction of the soils' resistivity to be eroded, the force of the water to entrain particles and its capacity to transport them in suspension. This has lead to concepts in which hydraulic parameters as flow velocity or composite parameters such as shear stress, stream power etc. are set into a direct relation to erosion and sediment transport. Soils' resistivity to erosion is in general represented as a threshold problem, in which a critical force is trespassed and the following increase of erosion depends on the characteristics of the sediments and the flowing water. Despite considerable efforts, these model concepts have not been able to produce more reliable and accurate reproduction and forecast of soil erosion than "simple" empirical models such as the USLE and its derivates. And there is still a lack in knowledge about the reasons for this failure. A considerable number of studies have addressed the following questions: 1) What are the main parameters of soils and flowing water influencing soil erosion?, 2) What relationship do these parameters have with the intensity and different types of soil erosion?, but only few researchers have faced the consequence: 3) Are the present concepts suitable to describe and quantify soil erosion accurately? Similar to other studies, we investigated the influence of basic parameters as grain size, slope, discharge and flow velocity on sediment transport by shallow flowing water in laboratory experiments. Variable flow was applied under different slopes on non-cohesive mobile beds. But in addition, field experiments were designed to quantify the hydraulic and erosive effects of small rills in the field. Here, small existing rills were flushed with defined flows, and flow velocity as well as transported sediments was quantified. The laboratory flume experiments clearly show a strong interaction of flow velocity, the size of the

  18. Effect of adsorbent addition on floc formation and clarification.

    PubMed

    Younker, Jessica M; Walsh, Margaret E

    2016-07-01

    Adding adsorbent into the coagulation process is an emerging treatment solution for targeting hard-to-remove dissolved organic compounds from both drinking water and industrial wastewater. The impact of adding powdered activated carbon (PAC) or organoclay (OC) adsorbents with ferric chloride (FeCl3) coagulant was investigated in terms of potential changes to the coagulated flocs formed with respect to size, structure, and breakage and regrowth properties. The ability of dissolved air flotation (DAF) and sedimentation (SED) clarification processes to remove hybrid adsorbent-coagulant flocs was also evaluated through clarified water quality analysis of samples collected in bench-scale jar test experiments. The jar tests were conducted using both a synthetic fresh water and oily wastewater test water spiked with dissolved aromatic compounds phenol and naphthalene. Results of the study demonstrated that addition of adsorbent reduced the median coagulated floc size by up to 50% but did not affect floc strength or regrowth potential after application of high shear. Experimental results in fresh water demonstrated that sedimentation was more effective than DAF for clarification of both FeCl3-PAC and FeCl3-OC floc aggregates. However, experimental tests performed on the synthetic oily wastewater showed that coagulant-adsorbent floc aggregates were effectively removed with both DAF and sedimentation treatment, with lower residual turbidity achieved in clarified water samples than with coagulation treatment alone. Addition of OC or PAC into the coagulation process resulted in removals of over half, or nearly all of the dissolved aromatics, respectively. PMID:27064206

  19. Addition of H2O and O-2 to Acetone and Dimethylsulfoxide Ligated Uranyl (V) Dioxocations

    SciTech Connect

    C. M. Leavitt; V. S. Bryantsev; W. A. deJong; M. S. Diallo; W. A. Goddard III; G. S. Groenewold; M. J. Van Stipdonk

    2009-03-01

    Gas-phase complexes of the formula [UO2(lig)]+ (lig = acetone (aco) or dimethylsulfoxide (dmso)) were generated by electrospray ionization (ESI) and studied by tandem ion-trap mass spectrometry to determine the general effect of ligand charge donation on the reactivity of UO2+ with respect to water and dioxygen. The original hypothesis that addition of O2 is enhanced by strong s-donor ligands bound to UO2+ is supported by results from competitive collision-induced dissociation (CID) experiments, which show near exclusive loss of H2O from [UO2(dmso)(H2O)(O2)]+, whereas both H2O and O2 are eliminated from the corresponding [UO2(aco)(H2O)(O2)]+ species. Ligand-addition reaction rates were investigated by monitoring precursor and product ion intensities as a function of ion storage time in the ion-trap mass spectrometer: these experiments suggest that the association of dioxygen to the UO2+ complex is enhanced when the more basic dmso ligand was coordinated to the metal complex. Conversely, addition of H2O is favored for the analogous complex ion that contains an aco ligand. Experimental rate measurements are supported by density function theory calculations of relative energies, which show stronger bonds between UO2+ and O2 when dmso is the coordinating ligand, whereas bonds to H2O are stronger for the aco complex.

  20. LDR structural experiment definition

    NASA Technical Reports Server (NTRS)

    Russell, R. A.

    1988-01-01

    A system study to develop the definition of a structural flight experiment for a large precision segmented reflector on the Space Station was accomplished by the Boeing Aerospace Company for NASA's Langley Research Center. The objective of the study was to use a Large Deployable Reflector (LDR) baseline configuration as the basis for focusing an experiment definition, so that the resulting accommodation requirements and interface constraints could be used as part of the mission requirements data base for Space Station. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of an optical bench, thermal shield and primary mirror segments, and alignment of the optical components, would occur on a second experiment. The structure would then be moved to the payload point system for pointing, optical control, and scientific optical measurement for a third experiment. Experiment 1 will deploy the primary support truss while it is attached to the instrument module structure. The ability to adjust the mirror attachment points and to attach several dummy primary mirror segments with a robotic system will also be demonstrated. Experiment 2 will be achieved by adding new components and equipment to experiment one. Experiment 3 will demonstrate advanced control strategies, active adjustment of the primary mirror alignment, and technologies associated with optical sensing.