Science.gov

Sample records for additional explanatory power

  1. A Hierarchical Examination of the Immigrant Achievement Gap: The Additional Explanatory Power of Nationality and Educational Selectivity over Traditional Explorations of Race and Socioeconomic Status

    ERIC Educational Resources Information Center

    Simms, Kathryn

    2012-01-01

    This study compared immigrant and nonimmigrant educational achievement (i.e., the immigrant gap) in math by reexamining the explanatory power of race and socioeconomic status (SES)--two variables, perhaps, most commonly considered in educational research. Four research questions were explored through growth curve modeling, factor analysis, and…

  2. The explanatory power of the substance view of persons.

    PubMed

    Beckwith, Francis J

    2004-01-01

    The purpose of this essay is to offer support for the substance view of persons, the philosophical anthropology defended by Patrick Lee in his essay. In order to accomplish this the author (1) presents a brief definition of the substance view; (2) argues that the substance view has more explanatory power in accounting for why we believe that human persons are intrinsically valuable even when they are not functioning as such (e.g., when on is temporarily comatose), why human persons remain identical to themselves over time, and why it follows from these points that the unborn are human persons; and (3) responds to two arguments that attempt to establish the claim that the early human being is not a unified substance until at least fourteen days after conception.

  3. Winter respiratory C losses provide explanatory power for net ecosystem productivity

    NASA Astrophysics Data System (ADS)

    Haeni, M.; Zweifel, R.; Eugster, W.; Gessler, A.; Zielis, S.; Bernhofer, C.; Carrara, A.; Grünwald, T.; Havránková, K.; Heinesch, B.; Herbst, M.; Ibrom, A.; Knohl, A.; Lagergren, F.; Law, B. E.; Marek, M.; Matteucci, G.; McCaughey, J. H.; Minerbi, S.; Montagnani, L.; Moors, E.; Olejnik, J.; Pavelka, M.; Pilegaard, K.; Pita, G.; Rodrigues, A.; Sanz Sánchez, M. J.; Schelhaas, M.-J.; Urbaniak, M.; Valentini, R.; Varlagin, A.; Vesala, T.; Vincke, C.; Wu, J.; Buchmann, N.

    2017-01-01

    Accurate predictions of net ecosystem productivity (NEPc) of forest ecosystems are essential for climate change decisions and requirements in the context of national forest growth and greenhouse gas inventories. However, drivers and underlying mechanisms determining NEPc (e.g., climate and nutrients) are not entirely understood yet, particularly when considering the influence of past periods. Here we explored the explanatory power of the compensation day (cDOY)—defined as the day of year when winter net carbon losses are compensated by spring assimilation—for NEPc in 26 forests in Europe, North America, and Australia, using different NEPc integration methods. We found cDOY to be a particularly powerful predictor for NEPc of temperate evergreen needleleaf forests (R2 = 0.58) and deciduous broadleaf forests (R2 = 0.68). In general, the latest cDOY correlated with the lowest NEPc. The explanatory power of cDOY depended on the integration method for NEPc, forest type, and whether the site had a distinct winter net respiratory carbon loss or not. The integration methods starting in autumn led to better predictions of NEPc from cDOY then the classical calendar method starting 1 January. Limited explanatory power of cDOY for NEPc was found for warmer sites with no distinct winter respiratory loss period. Our findings highlight the importance of the influence of winter processes and the delayed responses of previous seasons' climatic conditions on current year's NEPc. Such carry-over effects may contain information from climatic conditions, carbon storage levels, and hydraulic traits of several years back in time.

  4. Coping with Stress and Types of Burnout: Explanatory Power of Different Coping Strategies

    PubMed Central

    Montero-Marin, Jesus; Prado-Abril, Javier; Piva Demarzo, Marcelo Marcos; Gascon, Santiago; García-Campayo, Javier

    2014-01-01

    Background Burnout occurs when professionals use ineffective coping strategies to try to protect themselves from work-related stress. The dimensions of ‘overload’, ‘lack of development’ and ‘neglect’, belonging to the ‘frenetic’, ‘under-challenged’ and ‘worn-out’ subtypes, respectively, comprise a brief typological definition of burnout. The aim of the present study was to estimate the explanatory power of the different coping strategies on the development of burnout subtypes. Methods This was a cross-sectional survey with a random sample of university employees, stratified by occupation (n = 429). Multivariate linear regression models were constructed between the ‘Burnout Clinical Subtypes Questionnaire’, with its three dimensions –overload, lack of development and neglect– as dependent variables, and the ‘Coping Orientation for Problem Experiences’, with its fifteen dimensions, as independent variables. Adjusted multiple determination coefficients and beta coefficients were calculated to evaluate and compare the explanatory capacity of the different coping strategies. Results The ‘Coping Orientation for Problem Experiences’ subscales together explained 15% of the ‘overload’ (p<0.001), 9% of the ‘lack of development’ (p<0.001), and 21% of the ‘neglect’ (p<0.001). ‘Overload’ was mainly explained by ‘venting of emotions’ (Beta = 0.34; p<0.001); ‘lack of development’ by ‘cognitive avoidance’ (Beta = 0.21; p<0.001); and ‘neglect’ by ‘behavioural disengagement’ (Beta = 0.40; p<0.001). Other interesting associations were observed. Conclusions These findings further our understanding of the way in which the effectiveness of interventions for burnout may be improved, by influencing new treatments and preventive programmes using features of the strategies for handling stress in the workplace. PMID:24551223

  5. The explanatory role of relationship power and control in domestic violence against women in Nicaragua: a feminist psychology analysis.

    PubMed

    Grose, Rose Grace; Grabe, Shelly

    2014-08-01

    This study offers a feminist psychology analysis of various aspects of relationship power and control and their relative explanatory contribution to understanding physical, psychological, and sexual violence against women. Findings from structured interviews with 345 women from rural Nicaragua (M age = 44) overwhelmingly demonstrate that measures of power and control reflecting interpersonal relationship dynamics have the strongest predictive power for explaining violence when compared in multivariate analyses to several of the more commonly used measures. These findings have implications for future research and the evaluation of interventions designed to decrease levels of violence against women.

  6. Understanding burnout according to individual differences: ongoing explanatory power evaluation of two models for measuring burnout types

    PubMed Central

    2012-01-01

    Background The classic determination of burnout is by means of the dimensions exhaustion, cynicism and inefficacy. A new definition of the syndrome is based on clinical subtypes, consisting of “frenetic” (involved, ambitious, overloaded), “underchallenged” (indifferent, bored, with lack of personal development) and “worn-out” (neglectful, unacknowledged, with little control). The dimensions of overload, lack of development and neglect form a shortened version of this perspective. The aims of this study were to estimate and to compare the explanatory power of both typological models, short and long, with the standard measurement. Methods This was a cross-sectional survey with a randomly sample of university employees (n=409). Multivariate linear regression models were constructed between the “Maslach Burnout Inventory General Survey” (MBI-GS) dimensions, as dependent variables, and the “Burnout Clinical Subtype Questionnaire” (BCSQ-36 and BCSQ-12) dimensions, as independent variables. Results The BCSQ-36 subscales together explained 53% of ‘exhaustion’ (p<0.001), 59% of ‘cynicism’ (p<0.001) and 37% of ‘efficacy’ (p<0.001), while BCSQ-12 subscales explained 44% of ‘exhaustion’ (p<0.001), 44% of ‘cynicism’ (p<0.001), and 30% of ‘efficacy’ (p<0.001). The difference in the explanatory power of both models was significant for ‘exhaustion’ (p<0.001), and for ‘cynicism’ (p<0.001) and ‘efficacy (p<0.001). Conclusions Both BCSQ-36 and BCSQ-12 demonstrate great explanatory power over the standard MBI-GS, while offering a useful characterization of the syndrome for the evaluation and design of interventions tailored to the characteristics of each individual. The BCSQ-36 may be very useful in mental health services, given that it provides a good deal of information, while the BCSQ-12 could be used as a screening measure in primary care consultations owing to its simplicity and functional nature. PMID:23110723

  7. The roots of violence: converging psychoanalytic explanatory models for power struggles and violence in schools.

    PubMed

    Twemlow, S W

    2000-10-01

    This paper demonstrates that several psychoanalytic models taken together converge to collectively explain school violence and power struggles better than each does alone. Using my own experience in doing psychoanalytically informed community intervention, I approach the problem of school violence from a combination of Adlerian, Stollerian, dialectical social systems, and Klein-Bion perspectives. This integrated model is then applied to the Columbine High School massacre in Littleton, Colorado.

  8. Explanatory Models for Psychiatric Illness

    PubMed Central

    Kendler, Kenneth S.

    2009-01-01

    How can we best develop explanatory models for psychiatric disorders? Because causal factors have an impact on psychiatric illness both at micro levels and macro levels, both within and outside of the individual, and involving processes best understood from biological, psychological, and sociocultural perspectives, traditional models of science that strive for single broadly applicable explanatory laws are ill suited for our field. Such models are based on the incorrect assumption that psychiatric illnesses can be understood from a single perspective. A more appropriate scientific model for psychiatry emphasizes the understanding of mechanisms, an approach that fits naturally with a multicausal framework and provides a realistic paradigm for scientific progress, that is, understanding mechanisms through decomposition and reassembly. Simple subunits of complicated mechanisms can be usefully studied in isolation. Reassembling these constituent parts into a functioning whole, which is straightforward for simple additive mechanisms, will be far more challenging in psychiatry where causal networks contain multiple nonlinear interactions and causal loops. Our field has long struggled with the interrelationship between biological and psychological explanatory perspectives. Building from the seminal work of the neuronal modeler and philosopher David Marr, the author suggests that biology will implement but not replace psychology within our explanatory systems. The iterative process of interactions between biology and psychology needed to achieve this implementation will deepen our understanding of both classes of processes. PMID:18483135

  9. Social Cohesion as a Real-Life Phenomenon: Assessing the Explanatory Power of the Universalist and Particularist Perspectives

    ERIC Educational Resources Information Center

    Janmaat, Jan Germen

    2011-01-01

    Unlike most studies on social cohesion, this study explores the concept as a real-life macro-level phenomenon. It assesses to what extent the conceptions of social cohesion suggested by several macro-level approaches represent coherent empirically observable forms of social cohesion. Additionally it discusses two perspectives on social…

  10. Power consumption monitoring using additional monitoring device

    SciTech Connect

    Truşcă, M. R. C. Albert, Ş. Tudoran, C. Soran, M. L. Fărcaş, F.; Abrudean, M.

    2013-11-13

    Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

  11. 50 CFR 453.06 - Additional Committee powers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information....

  12. 50 CFR 453.06 - Additional Committee powers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information....

  13. 50 CFR 453.06 - Additional Committee powers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information....

  14. 50 CFR 453.06 - Additional Committee powers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information....

  15. 50 CFR 453.06 - Additional Committee powers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information....

  16. 12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION AND EQUIPMENT PART OF BUILDING - Boswell Bay White Alice Site, Radio Relay Building, Chugach National Forest, Cordova, Valdez-Cordova Census Area, AK

  17. The relationship of explanatory flexibility to explanatory style.

    PubMed

    Moore, Michael T; Fresco, David M

    2007-12-01

    Traditional cognitive vulnerability-stress models regarding the etiology of depression emphasize the content of the depressed individual's thoughts. One important cognitive content index, explanatory style, represents the habitual way that individuals assign causes to events that occur in their lives. A more contemporary model, however, emphasizes the cognitive process by which these attributions are made and to what extent the individual can make different attributions depending on the particular context of the event. This process is referred to as explanatory flexibility. Given that both indices of causal explanation are derived from the same assessment instrument, the Attributional Style Questionnaire, the current investigation sought to examine the extent to which the two variables can be differentiated from one another. Results indicated that explanatory style (a measure of cognitive content) and explanatory flexibility (a cognitive process measure) are empirically related, but distinct, constructs.

  18. 3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 4. Plan no. 10,548. Scale 1/4 inch to the foot, elevations, and one inch to the foot, sections and details. April 30, 1945, last revised 6/19/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

  19. 4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. Also includes plot plan at 1 inch to 100 feet. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 3. Plan no. 10,548. Scale 1/4 inch and h inch to the foot. April 30, 1945, last revised 6/22/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

  20. The Relationship of Explanatory Flexibility to Explanatory Style

    ERIC Educational Resources Information Center

    Moore, Michael T.; Fresco, David M.

    2007-01-01

    Traditional cognitive vulnerability-stress models regarding the etiology of depression emphasize the content of the depressed individual's thoughts. One important cognitive content index, explanatory style, represents the habitual way that individuals assign causes to events that occur in their lives. A more contemporary model, however, emphasizes…

  1. Lithium Dinitramide as an Additive in Lithium Power Cells

    NASA Technical Reports Server (NTRS)

    Gorkovenko, Alexander A.

    2007-01-01

    Lithium dinitramide, LiN(NO2)2 has shown promise as an additive to nonaqueous electrolytes in rechargeable and non-rechargeable lithium-ion-based electrochemical power cells. Such non-aqueous electrolytes consist of lithium salts dissolved in mixtures of organic ethers, esters, carbonates, or acetals. The benefits of adding lithium dinitramide (which is also a lithium salt) include lower irreversible loss of capacity on the first charge/discharge cycle, higher cycle life, lower self-discharge, greater flexibility in selection of electrolyte solvents, and greater charge capacity. The need for a suitable electrolyte additive arises as follows: The metallic lithium in the anode of a lithium-ion-based power cell is so highly reactive that in addition to the desired main electrochemical reaction, it engages in side reactions that cause formation of resistive films and dendrites, which degrade performance as quantified in terms of charge capacity, cycle life, shelf life, first-cycle irreversible capacity loss, specific power, and specific energy. The incidence of side reactions can be reduced through the formation of a solid-electrolyte interface (SEI) a thin film that prevents direct contact between the lithium anode material and the electrolyte. Ideally, an SEI should chemically protect the anode and the electrolyte from each other while exhibiting high conductivity for lithium ions and little or no conductivity for electrons. A suitable additive can act as an SEI promoter. Heretofore, most SEI promotion was thought to derive from organic molecules in electrolyte solutions. In contrast, lithium dinitramide is inorganic. Dinitramide compounds are known as oxidizers in rocket-fuel chemistry and until now, were not known as SEI promoters in battery chemistry. Although the exact reason for the improvement afforded by the addition of lithium dinitramide is not clear, it has been hypothesized that lithium dinitramide competes with other electrolyte constituents to react with

  2. Power-law distributions from additive preferential redistributions

    NASA Astrophysics Data System (ADS)

    Ree, Suhan

    2006-02-01

    We introduce a nongrowth model that generates the power-law distribution with the Zipf exponent. There are N elements, each of which is characterized by a quantity, and at each time step these quantities are redistributed through binary random interactions with a simple additive preferential rule, while the sum of quantities is conserved. The situation described by this model is similar to those of closed N -particle systems when conservative two-body collisions are only allowed. We obtain stationary distributions of these quantities both analytically and numerically while varying parameters of the model, and find that the model exhibits the scaling behavior for some parameter ranges. Unlike well-known growth models, this alternative mechanism generates the power-law distribution when the growth is not expected and the dynamics of the system is based on interactions between elements. This model can be applied to some examples such as personal wealths, city sizes, and the generation of scale-free networks when only rewiring is allowed.

  3. Parent Predictors of Adolescents' Explanatory Style

    ERIC Educational Resources Information Center

    Vélez, Clorinda E.; Krause, Elizabeth D.; Brunwasser, Steven M.; Freres, Derek R.; Abenavoli, Rachel M.; Gillham, Jane E.

    2015-01-01

    The current study tested the prospective relations (6-month lag) between three aspects of the parent-child relationship at Time 1 (T1) and adolescents' explanatory styles at Time 2 (T2): caregiving behaviors, parents' explanatory style for their own negative events, and parents' explanatory style for their children's negative events. The sample…

  4. Predictors of HIV-protection behaviour in HIV-positive men who have sex with casual male partners: a test of the explanatory power of an extended Information-Motivation-Behavioural Skills model.

    PubMed

    Nideröst, Sibylle; Gredig, Daniel; Roulin, Christophe; Rickenbach, Martin

    2011-07-01

    This prospective study applies an extended Information-Motivation-Behavioural Skills (IMB) model to establish predictors of HIV-protection behaviour among HIV-positive men who have sex with men (MSM) during sex with casual partners. Data have been collected from anonymous, self-administered questionnaires and analysed by using descriptive and backward elimination regression analyses. In a sample of 165 HIV-positive MSM, 82 participants between the ages of 23 and 78 (M=46.4, SD=9.0) had sex with casual partners during the three-month period under investigation. About 62% (n=51) have always used a condom when having sex with casual partners. From the original IMB model, only subjective norm predicted condom use. More important predictors that increased condom use were low consumption of psychotropics, high satisfaction with sexuality, numerous changes in sexual behaviour after diagnosis, low social support from friends, alcohol use before sex and habitualised condom use with casual partner(s). The explanatory power of the calculated regression model was 49% (p<0.001). The study reveals the importance of personal and social resources and of routines for condom use, and provides information for the research-based conceptualisation of prevention offers addressing especially people living with HIV ("positive prevention").

  5. Modeling multiple land use changes using ANN, CART and MARS: Comparing tradeoffs in goodness of fit and explanatory power of data mining tools

    NASA Astrophysics Data System (ADS)

    Tayyebi, Amin; Pijanowski, Bryan C.

    2014-05-01

    Over half of the earth's terrestrial surface has been modified by humans. This modification is called land use change and its pattern is known to occur in a non-linear way. The land use change modeling community can advance its models using data mining tools. Here, we present three data mining land use change models, one based on Artificial Neural Network (ANN), another on Classification And Regression Trees (CART) and another Multivariate Adaptive Regression Splines (MARS). We reconfigured the three data mining models to concurrently simulate multiple land use classes (e.g. agriculture, forest and urban) in South-Eastern Wisconsin (SEWI), USA (time interval 1990-2000) and in Muskegon River Watershed (MRW), Michigan, USA (time interval 1978-1998). We compared the results of the three data mining tools using relative operating characteristic (ROC) and percent correct match (PCM). We found that ANN provided the best accuracy in both areas for three land use classes (e.g. urban, agriculture and forest). In addition, in both regions, CART and MARS both showed that forest gain occurred in areas close to current forests, agriculture patches and away from roads. Urban increased in areas of high urban density, close to roads and in areas with few forests and wetlands. We also found that agriculture gain is more likely for the areas closer to the agriculture and forest patches. Elevation strongly influenced urbanization and forest gain in MRW while it has no effect in SEWI.

  6. IRAS sky survey atlas: Explanatory supplement

    NASA Technical Reports Server (NTRS)

    Wheelock, S. L.; Gautier, T. N.; Chillemi, J.; Kester, D.; Mccallon, H.; Oken, C.; White, J.; Gregorich, D.; Boulanger, F.; Good, J.

    1994-01-01

    This Explanatory Supplement accompanies the IRAS Sky Survey Atlas (ISSA) and the ISSA Reject Set. The first ISSA release in 1991 covers completely the high ecliptic latitude sky, absolute value of beta is greater than 50 deg, with some coverage down to the absolute value of beta approx. equal to 40 deg. The second ISSA release in 1992 covers ecliptic latitudes of 50 deg greater than the absolute value of beta greater than 20 deg, with some coverage down to the absolute value of beta approx. equal to 13 deg. The remaining fields covering latitudes within 20 deg of the ecliptic plane are of reduced quality compared to the rest of the ISSA fields and therefore are released as a separate IPAC product, the ISSA Reject Set. The reduced quality is due to contamination by zodiacal emission residuals. Special care should be taken when using the ISSA Reject images. In addition to information on the ISSA images, some information is provided in this Explanatory Supplement on the IRAS Zodiacal History File (ZOHF), Version 3.0, which was described in the December 1988 release memo. The data described in this Supplement are available at the National Space Science Data Center (NSSDC) at the Goddard Space Flight Center. The interested reader is referred to the NSSDC for access to the IRAS Sky Survey Atlas (ISSA).

  7. Darwinian natural selection: its enduring explanatory power

    PubMed Central

    2012-01-01

    Evolutionary theory has never had a stronger scientific foundation than it does today. In a short review I hope to portray the deep commitment of today's biologists to Darwinian natural selection and to discoveries made since Darwin's time. In spite of the scientific advances in the century and a half since the publication of On the Origin of Species, Darwin still remains the principal author of modern evolutionary theory. He is one of the greatest contributors of all time to our understanding of nature. PMID:22481845

  8. 29 CFR 780.401 - General explanatory statement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...(b)(12) § 780.401 General explanatory statement. (a) Section 13(b)(12) of the Act contains the same... amendments. (b) In addition to exempting employees engaged in agriculture, section 13(b)(12) also exempts... effect of the 1997 amendment to section 13(b)(12) is to expand the overtime exemption for any...

  9. 29 CFR 780.401 - General explanatory statement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...(b)(12) § 780.401 General explanatory statement. (a) Section 13(b)(12) of the Act contains the same... section 13(a)(6) (A), (B), (C), (D), and (E) of the 1966 amendments. (b) In addition to exempting employees employed in agriculture, section 13(b)(12) also exempts from the overtime provisions of the...

  10. 29 CFR 780.401 - General explanatory statement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...(b)(12) § 780.401 General explanatory statement. (a) Section 13(b)(12) of the Act contains the same... amendments. (b) In addition to exempting employees engaged in agriculture, section 13(b)(12) also exempts... effect of the 1997 amendment to section 13(b)(12) is to expand the overtime exemption for any...

  11. 29 CFR 780.401 - General explanatory statement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...(b)(12) § 780.401 General explanatory statement. (a) Section 13(b)(12) of the Act contains the same... amendments. (b) In addition to exempting employees engaged in agriculture, section 13(b)(12) also exempts... effect of the 1997 amendment to section 13(b)(12) is to expand the overtime exemption for any...

  12. 29 CFR 780.401 - General explanatory statement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...(b)(12) § 780.401 General explanatory statement. (a) Section 13(b)(12) of the Act contains the same... amendments. (b) In addition to exempting employees engaged in agriculture, section 13(b)(12) also exempts... effect of the 1997 amendment to section 13(b)(12) is to expand the overtime exemption for any...

  13. 18 CFR 385.705 - Additional powers of presiding officer with respect to briefs (Rule 705).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional powers of presiding officer with respect to briefs (Rule 705). 385.705 Section 385.705 Conservation of Power and Water... PROCEDURE Decisions § 385.705 Additional powers of presiding officer with respect to briefs (Rule 705)....

  14. 18 CFR 385.705 - Additional powers of presiding officer with respect to briefs (Rule 705).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional powers of presiding officer with respect to briefs (Rule 705). 385.705 Section 385.705 Conservation of Power and Water... PROCEDURE Decisions § 385.705 Additional powers of presiding officer with respect to briefs (Rule 705)....

  15. Against Explanatory Minimalism in Psychiatry

    PubMed Central

    Thornton, Tim

    2015-01-01

    The idea that psychiatry contains, in principle, a series of levels of explanation has been criticized not only as empirically false but also, by Campbell, as unintelligible because it presupposes a discredited pre-Humean view of causation. Campbell’s criticism is based on an interventionist-inspired denial that mechanisms and rational connections underpin physical and mental causation, respectively, and hence underpin levels of explanation. These claims echo some superficially similar remarks in Wittgenstein’s Zettel. But attention to the context of Wittgenstein’s remarks suggests a reason to reject explanatory minimalism in psychiatry and reinstate a Wittgensteinian notion of levels of explanation. Only in a context broader than the one provided by interventionism is that the ascription of propositional attitudes, even in the puzzling case of delusions, justified. Such a view, informed by Wittgenstein, can reconcile the idea that the ascription mental phenomena presupposes a particular level of explanation with the rejection of an a priori claim about its connection to a neurological level of explanation. PMID:26696908

  16. Against Explanatory Minimalism in Psychiatry.

    PubMed

    Thornton, Tim

    2015-01-01

    The idea that psychiatry contains, in principle, a series of levels of explanation has been criticized not only as empirically false but also, by Campbell, as unintelligible because it presupposes a discredited pre-Humean view of causation. Campbell's criticism is based on an interventionist-inspired denial that mechanisms and rational connections underpin physical and mental causation, respectively, and hence underpin levels of explanation. These claims echo some superficially similar remarks in Wittgenstein's Zettel. But attention to the context of Wittgenstein's remarks suggests a reason to reject explanatory minimalism in psychiatry and reinstate a Wittgensteinian notion of levels of explanation. Only in a context broader than the one provided by interventionism is that the ascription of propositional attitudes, even in the puzzling case of delusions, justified. Such a view, informed by Wittgenstein, can reconcile the idea that the ascription mental phenomena presupposes a particular level of explanation with the rejection of an a priori claim about its connection to a neurological level of explanation.

  17. System and method for high power diode based additive manufacturing

    DOEpatents

    El-Dasher, Bassem S.; Bayramian, Andrew; Demuth, James A.; Farmer, Joseph C.; Torres, Sharon G.

    2016-04-12

    A system is disclosed for performing an Additive Manufacturing (AM) fabrication process on a powdered material forming a substrate. The system may make use of a diode array for generating an optical signal sufficient to melt a powdered material of the substrate. A mask may be used for preventing a first predetermined portion of the optical signal from reaching the substrate, while allowing a second predetermined portion to reach the substrate. At least one processor may be used for controlling an output of the diode array.

  18. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  19. Explanatory flexibility and explanatory style in treatment-seeking clients with Axis I psychopathology.

    PubMed

    Lackner, Ryan J; Moore, Michael T; Minerovic, Julia; Fresco, David M

    2015-12-01

    Cognitive diathesis stress models of depression emphasize individual styles of attributing causal explanations to negative and positive events in life. The Attributional Style Questionnaire (ASQ) has traditionally been used to measure explanatory style, defined as an individual's habitual way of assigning causes to negative events. Explanatory flexibility, rather than focusing on the content of one's thoughts, emphasizes the extent to which individuals are able to make different attributions depending on the particular context of each event. The underlying notion is that individuals who are better able to adapt to the cues and demands of a stressful situation may be able to respond more effectively and are thereby less vulnerable to depression. Despite evidence attesting to its relevance to depression and anxiety disorders, explanatory flexibility has yet to be examined in a purely treatment-seeking sample of patients clinically diagnosed with Axis I psychopathology. The current study examined baseline levels of explanatory flexibility, along with explanatory style, in a sample of 171 treatment-seeking patients diagnosed with either major depressive disorder (MDD), generalized anxiety disorder (GAD), or at least one other Axis I disorder. Overall, the results replicate and extend past results indicating a distinction between explanatory flexibility and explanatory style. Furthermore, patients with MDD and GAD demonstrated lower levels of explanatory flexibility relative to patients with other Axis I disorders. Thus, explanatory flexibility may assist in our understanding of the etiology, maintenance, and treatment of emotional disorders, with particular relevance to MDD and GAD.

  20. Examining punishment at different explanatory levels.

    PubMed

    dos Santos, Miguel; Wedekind, Claus

    2012-02-01

    Experimental studies on punishment have sometimes been over-interpreted not only for the reasons Guala lists, but also because of a frequent conflation of proximate and ultimate explanatory levels that Guala's review perpetuates. Moreover, for future analyses we may need a clearer classification of different kinds of punishment.

  1. Pathological Left-Handedness: An Explanatory Model.

    ERIC Educational Resources Information Center

    Satz, Paul

    Reported was an explanatory conceptual model for pathological left-handedness (PLH) and related hypotheses, some of which could not be tested empirically due to lack of information. The model was reported to provide an explanation for the relationship between handedness and specific learning disability, and handedness and cerebral dominance for…

  2. Older Men's Explanatory Model for Osteoporosis

    ERIC Educational Resources Information Center

    Solimeo, Samantha L.; Weber, Thomas J.; Gold, Deborah T.

    2011-01-01

    Purpose: To explore the nature of men's experiences of osteoporosis by developing an understanding of men's explanatory models. Design and Methods: This descriptive study invited community-residing male osteoporosis patients aged 50+ to participate in interviews about osteoporosis. Participants were recruited from a hospital-affiliated bone…

  3. 7 CFR 28.522 - Explanatory terms.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Explanatory terms. 28.522 Section 28.522 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON...

  4. Causal explanatory pluralism and medically unexplained physical symptoms.

    PubMed

    Cournoyea, Michael; Kennedy, Ashley Graham

    2014-12-01

    In this paper, we propose a methodology for investigating medically unexplained physical symptoms (MUPSs). These symptoms are common in both primary and specialist medical practices, but are poorly understood. Currently, MUPSs are diagnosed via non-explanatory labels. However, we show that explanatory diagnoses are preferable to non-explanatory syndromic diagnoses because they bring both epistemic and therapeutic benefits to patients and their providers. Thus, we advocate a methodology of causal explanatory pluralism in the diagnostic workup and clinical management of MUPSs.

  5. Influence of edge additions on the synchronizability of oscillatory power networks

    NASA Astrophysics Data System (ADS)

    Yang, Li-xin; Jiang, Jun; Liu, Xiao-jun

    2016-12-01

    The influence of edge-adding number and edge-adding distance on synchronization of oscillatory power network is investigated. Here we study how the addition of new links impacts the emergence of synchrony in oscillatory power network, focusing on ring, and tree-like topologies. Numerical simulations show that the impact of distance of adding edges whether homogeneous (generators to generators or consumers to consumers) or heterogeneous (generators to consumer nodes and vice versa) edges is not obvious on the synchronizability of oscillatory power network. However, for the edge-adding number, it is observed that the bigger heterogeneous edge-adding number, the stronger synchronizability of power network will be. Furthermore, the homogeneous edge-adding number does not affect the synchronizability of oscillatory power network.

  6. The effect of a negative mood priming challenge on dysfunctional attitudes, explanatory style, and explanatory flexibility.

    PubMed

    Fresco, David M; Heimberg, Richard G; Abramowitz, Adrienne; Bertram, Tara L

    2006-06-01

    Ninety-seven undergraduates, 48 of whom had a history of self-reported major depression, completed measures of mood and cognitive style (e.g. explanatory style, explanatory flexibility, dysfunctional attitudes) prior to and directly after a negative mood priming challenge that consisted of listening to sad music and thinking about an upsetting past event. Eighteen of the previously depressed participants endorsed baseline levels of depression, explanatory style for negative events, and dysfunctional attitudes higher than levels reported by never depressed participants or euthymic participants with a history of depression. All three groups (never depressed participants, dysphoric participants with a history of depression, euthymic participants with a history of depression) demonstrated increases in dysphoria and dysfunctional attitudes in response to the negative mood priming challenge. Dysphoric participants with a history of depression, but not the other two groups, evidenced modest increases in explanatory style following the negative mood priming challenge. Finally, euthymic participants with a history of depression, but not the other two groups, evidenced drops in explanatory flexibility. Findings from the present study suggest that the cognitive theories of depression may benefit from examining both cognitive content and cognitive flexibility when assessing risk for depression.

  7. Graphene as conductive additives in binderless activated carbon electrodes for power enhancement of supercapacitor

    NASA Astrophysics Data System (ADS)

    Nor, N. S. M.; Deraman, M.; Suleman, M.; Norizam, M. D. M.; Basri, N. H.; Sazali, N. E. S.; Hamdan, E.; Hanappi, M. F. Y. M.; Tajuddin, N. S. M.; Othman, M. A. R.; Shamsudin, S. A.; Omar, R.

    2016-11-01

    Carbon based supercapacitor electrodes from composite of binderless activated carbon and graphene as a conductive additive were fabricated with various amount of graphene (0, 2, 4, 6, 8 and 10 wt%). Graphene was mixed in self-adhesive carbon grains produced from pre-carbonized powder derived from fibers of oil palm empty fruit bunches and converted into green monoliths (GMs). The GMs were carbonized (N2) and activated (CO2) to produce activated carbon monoliths (ACMs) electrodes. Porosity characterizations by nitrogen adsorption-desorption isotherm method shows that the pore characteristics of the ACMs are influenced by the graphene additive. The results of galvanostatic charge-discharge tests carried out on the supercapacitor cells fabricated using these electrodes shows that the addition of graphene additive (even in small amount) decreases the equivalent series resistance and enhances the specific power of the cells but significantly lowers the specific capacitance. The supercapacitor cell constructed with the electrode containing 4 wt % of graphene offers the maximum power (175 W kg-1) which corresponds to an improvement of 55%. These results demonstrate that the addition of graphene as conductive additive in activated carbon electrodes can enhance the specific power of the supercapacitor.

  8. Children with autism spectrum disorder have an exceptional explanatory drive.

    PubMed

    Rutherford, M D; Subiaul, Francys

    2016-08-01

    An "explanatory drive" motivates children to explain ambiguity. Individuals with autism spectrum disorders are interested in how systems work, but it is unknown whether they have an explanatory drive. We presented children with and without autism spectrum disorder unsolvable problems in a physical and in a social context and evaluated problem-solving and explanation-seeking responses. In the physical context (but not the social context), the children with autism spectrum disorder showed a stronger explanatory drive than controls. Importantly, the number of explanatory behaviors made by children with autism spectrum disorder in the social context was independent of social and communicative impairments. Children with autism spectrum disorder did not show an exceptional explanatory drive in the social domain. These results suggest that children with autism spectrum disorder have an explanatory drive and that the explanatory drive may be domain specific.

  9. Additivity property and emergence of power laws in nonequilibrium steady states.

    PubMed

    Das, Arghya; Chatterjee, Sayani; Pradhan, Punyabrata; Mohanty, P K

    2015-11-01

    We show that an equilibriumlike additivity property can remarkably lead to power-law distributions observed frequently in a wide class of out-of-equilibrium systems. The additivity property can determine the full scaling form of the distribution functions and the associated exponents. The asymptotic behavior of these distributions is solely governed by branch-cut singularity in the variance of subsystem mass. To substantiate these claims, we explicitly calculate, using the additivity property, subsystem mass distributions in a wide class of previously studied mass aggregation models as well as in their variants. These results could help in the thermodynamic characterization of nonequilibrium critical phenomena.

  10. Improving the predictive accuracy of hurricane power outage forecasts using generalized additive models.

    PubMed

    Han, Seung-Ryong; Guikema, Seth D; Quiring, Steven M

    2009-10-01

    Electric power is a critical infrastructure service after hurricanes, and rapid restoration of electric power is important in order to minimize losses in the impacted areas. However, rapid restoration of electric power after a hurricane depends on obtaining the necessary resources, primarily repair crews and materials, before the hurricane makes landfall and then appropriately deploying these resources as soon as possible after the hurricane. This, in turn, depends on having sound estimates of both the overall severity of the storm and the relative risk of power outages in different areas. Past studies have developed statistical, regression-based approaches for estimating the number of power outages in advance of an approaching hurricane. However, these approaches have either not been applicable for future events or have had lower predictive accuracy than desired. This article shows that a different type of regression model, a generalized additive model (GAM), can outperform the types of models used previously. This is done by developing and validating a GAM based on power outage data during past hurricanes in the Gulf Coast region and comparing the results from this model to the previously used generalized linear models.

  11. Exploring the explaining quality of physics online explanatory videos

    NASA Astrophysics Data System (ADS)

    Kulgemeyer, Christoph; Peters, Cord H.

    2016-11-01

    Explaining skills are among the most important skills educators possess. Those skills have also been researched in recent years. During the same period, another medium has additionally emerged and become a popular source of information for learners: online explanatory videos, chiefly from the online video sharing website YouTube. Their content and explaining quality remain to this day mostly unmonitored, as well is their educational impact in formal contexts such as schools or universities. In this study, a framework for explaining quality, which has emerged from surveying explaining skills in expert-novice face-to-face dialogues, was used to explore the explaining quality of such videos (36 YouTube explanatory videos on Kepler’s laws and 15 videos on Newton’s third law). The framework consists of 45 categories derived from physics education research that deal with explanation techniques. YouTube provides its own ‘quality measures’ based on surface features including ‘likes’, views, and comments for each video. The question is whether or not these measures provide valid information for educators and students if they have to decide which video to use. We compared the explaining quality with those measures. Our results suggest that there is a correlation between explaining quality and only one of these measures: the number of content-related comments.

  12. [Brua as an explanatory model for diseases].

    PubMed

    Minkenberg, E H M; Blom, J D

    2015-01-01

    A 26-year-old woman from the island of Aruba who had been living in the Netherlands for ten years felt she was misunderstood by the various health professionals she had consulted because of her fear that she was being poisoned and would soon die. Due to her background en her belief in brua, she attributed her symptoms and her illness to 'voodoo', allegedly practiced by members of her husband's family in connection with relationship problems. A culture-sensitive approach to the patient, along with thorough psychiatric and neurological tests, yielded a surprising result. Our findings emphasise how important it is for us as health professionals to acquaint ourselves with explanatory models of the diseases of our patients, and how vital it is for us to be aware of a patient's background, particularly if the patient is of foreign descent.

  13. The causal explanatory functions of medical diagnoses.

    PubMed

    Maung, Hane Htut

    2017-02-01

    Diagnoses in medicine are often taken to serve as explanations of patients' symptoms and signs. This article examines how they do so. I begin by arguing that although some instances of diagnostic explanation can be formulated as covering law arguments, they are explanatory neither in virtue of their argumentative structures nor in virtue of general regularities between diagnoses and clinical presentations. I then consider the theory that medical diagnoses explain symptoms and signs by identifying their actual causes in particular cases. While I take this to be largely correct, I argue that for a diagnosis to function as a satisfactory causal explanation of a patient's symptoms and signs, it also needs to be supplemented by understanding the mechanisms by which the identified cause produces the symptoms and signs. This mechanistic understanding comes not from the diagnosis itself, but rather from the theoretical framework within which the physician operates.

  14. Relation of irrational thinking and the Pessimistic Explanatory Style.

    PubMed

    Ziegler, D J; Hawley, J L

    2001-04-01

    This study investigated the possible relationship between Ellis's construct of irrational thinking and Seligman's construct of explanatory style, with a view toward possibly strengthening the personality theory underlying Rational Emotive Behavior Therapy in particular and cognitive-behavior therapies more generally. In this investigation 180 college students were administered the Survey of Personal Beliefs and the Attributional Style Questionnaire to measure irrational thinking and explanatory style, respectively. Students who scored higher on Pessimistic Explanatory Style also scored higher on Overall Irrational Thinking and on Low Frustration Tolerance than did those who were categorized as having an Optimistic Explanatory Style. This indicates support for Ellis's developing personality theory, especially his theoretical account of depression.

  15. Bragg's rule of stopping power additivity: a compilation and summary of results

    SciTech Connect

    Thwaites, D.I.

    1983-09-01

    Stopping power additivity, as expressed by Bragg's rule, is an important concept in many practical situations involving charged particles. Its validity has been investigated in a large number of studies and the wide range of data is confusing and at times conflicting. No previous comprehensive survey of the data has been undertaken. Thus a compilation is attempted here of a hundred or so papers which have included tests of Bragg's rule. Their main results are indicated and a summary is given of the effects of chemical binding and phase on the stopping power of heavy charged particles. Such effects are confirmed on the evidence available. Chemical binding effects become more significant for materials containing low-Z constituents and as energy falls into and through the transition region. Deviations of up to 50% have been observed in atomic stopping cross sections extracted from measurements on hydrocarbons. There is still some conflicting evidence appearing on phase effects. However, in general a broad consensus is emerging indicating significant differences in H/sub 2/O and organic and similar materials. Stopping cross sections in the vapor phase are greater by up to approx. 5 or 10% at energies around those of the stopping power maximum for protons and He ions. The effects decrease as energy increases.

  16. Modelling Analysis of Students' Processes of Generating Scientific Explanatory Hypotheses

    ERIC Educational Resources Information Center

    Park, Jongwon

    2006-01-01

    It has recently been determined that generating an explanatory hypothesis to explain a discrepant event is important for students' conceptual change. The purpose of this study is to investigate how students' generate new explanatory hypotheses. To achieve this goal, questions are used to identify students prior ideas related to electromagnetic…

  17. Children with Autism Spectrum Disorder Have an Exceptional Explanatory Drive

    ERIC Educational Resources Information Center

    Rutherford, M. D.; Subiaul, Francys

    2016-01-01

    An "explanatory drive" motivates children to explain ambiguity. Individuals with autism spectrum disorders are interested in how systems work, but it is unknown whether they have an explanatory drive. We presented children with and without autism spectrum disorder unsolvable problems in a physical and in a social context and evaluated…

  18. Examining Explanatory Style's Relationship to Efficacy and Burnout in Teachers

    ERIC Educational Resources Information Center

    Fineburg, Amy Cheek

    2010-01-01

    Explanatory style, the ways in which people explain both good and bad events (Seligman, 1998), shares theoretical components with teachers' sense of efficacy (Tshannon-Moran & Woolfolk-Hoy, 2001), which is how capable teachers feel about teaching. According to Bandura (1994), efficacy informs explanatory style, but this assertion does not…

  19. Thermoelectric Power Generation from Lanthanum Strontium Titanium Oxide at Room Temperature through the Addition of Graphene.

    PubMed

    Lin, Yue; Norman, Colin; Srivastava, Deepanshu; Azough, Feridoon; Wang, Li; Robbins, Mark; Simpson, Kevin; Freer, Robert; Kinloch, Ian A

    2015-07-29

    The applications of strontium titanium oxide based thermoelectric materials are currently limited by their high operating temperatures of >700 °C. Herein, we show that the thermal operating window of lanthanum strontium titanium oxide (LSTO) can be reduced to room temperature by the addition of a small amount of graphene. This increase in operating performance will enable future applications such as generators in vehicles and other sectors. The LSTO composites incorporated one percent or less of graphene and were sintered under an argon/hydrogen atmosphere. The resultant materials were reduced and possessed a multiphase structure with nanosized grains. The thermal conductivity of the nanocomposites decreased upon the addition of graphene, whereas the electrical conductivity and power factor both increased significantly. These factors, together with a moderate Seebeck coefficient, meant that a high power factor of ∼2500 μWm(-1)K(-2) was reached at room temperature at a loading of 0.6 wt % graphene. The highest thermoelectric figure of merit (ZT) was achieved when 0.6 wt % graphene was added (ZT = 0.42 at room temperature and 0.36 at 750 °C), with >280% enhancement compared to that of pure LSTO. A preliminary 7-couple device was produced using bismuth strontium cobalt oxide/graphene-LSTO pucks. This device had a Seebeck coefficient of ∼1500 μV/K and an open voltage of 600 mV at a mean temperature of 219 °C.

  20. Complex additive systems for Mn-Zn ferrites with low power loss

    SciTech Connect

    Töpfer, J. Angermann, A.

    2015-05-07

    Mn-Zn ferrites were prepared via an oxalate-based wet-chemical synthesis process. Nanocrystalline ferrite powders with particle size of 50 nm were sintered at 1150 °C with 500 ppm CaO and 100 ppm SiO{sub 2} as standard additives. A fine-grained, dense microstructure with grain size of 4–5 μm was obtained. Simultaneous addition of Nb{sub 2}O{sub 5}, ZrO{sub 2}, V{sub 2}O{sub 5}, and SnO{sub 2} results low power losses, e.g., 65 mW/cm{sup 3} (500 kHz, 50 mT, 80 °C) and 55 mW/cm{sup 3} (1 MHz, 25 mT, 80 °C). Loss analysis shows that eddy current and residual losses were minimized through formation of insulating grain boundary phases, which is confirmed by transmission electron microscopy. Addition of SnO{sub 2} increases the ferrous ion concentration and affects anisotropy as reflected in permeability measurements μ(T)

  1. Power conversion efficiency enhancement in OPV devices using spin 1/2 molecular additives

    NASA Astrophysics Data System (ADS)

    Basel, Tek; Vardeny, Valy; Yu, Luping

    2014-03-01

    We investigated the power conversion efficiency of bulk heterojunction OPV cells based on the low bandgap polymer PTB7, blend with C61-PCBM. We also employed the technique of photo-induced absorption, PA; electrical and magneto-PA (MPA) techniques to understand the details of the photocurrent generation process in this blend. We found that spin 1/2 molecular additives, such as Galvinoxyl (Gxl) radicals dramatically enhance the cell efficiency; we obtained 20% increase in photocurrent upon Gxl doping with 2% weight. We explain our finding by the ability of the spin 1/2 radicals to interfere with the known major loss mechanism in the cell due to recombination of charge transfer exciton at the D-A interface via triplet excitons in the polymer donors. Supported by National Science Foundation-Material Science & Engineering Center (NSF-MRSEC), University of Utah.

  2. Explanatory and illustrative visualization of special and general relativity.

    PubMed

    Weiskopf, Daniel; Borchers, Marc; Ertl, Thomas; Falk, Martin; Fechtig, Oliver; Frank, Regine; Grave, Frank; King, Andreas; Kraus, Ute; Müller, Thomas; Nollert, Hans-Peter; Rica Mendez, Isabel; Ruder, Hanns; Schafhitzel, Tobias; Schär, Sonja; Zahn, Corvin; Zatloukal, Michael

    2006-01-01

    This paper describes methods for explanatory and illustrative visualizations used to communicate aspects of Einstein's theories of special and general relativity, their geometric structure, and of the related fields of cosmology and astrophysics. Our illustrations target a general audience of laypersons interested in relativity. We discuss visualization strategies, motivated by physics education and the didactics of mathematics, and describe what kind of visualization methods have proven to be useful for different types of media, such as still images in popular science magazines, film contributions to TV shows, oral presentations, or interactive museum installations. Our primary approach is to adopt an egocentric point of view: The recipients of a visualization participate in a visually enriched thought experiment that allows them to experience or explore a relativistic scenario. In addition, we often combine egocentric visualizations with more abstract illustrations based on an outside view in order to provide several presentations of the same phenomenon. Although our visualization tools often build upon existing methods and implementations, the underlying techniques have been improved by several novel technical contributions like image-based special relativistic rendering on GPUs, special relativistic 4D ray tracing for accelerating scene objects, an extension of general relativistic ray tracing to manifolds described by multiple charts, GPU-based interactive visualization of gravitational light deflection, as well as planetary terrain rendering. The usefulness and effectiveness of our visualizations are demonstrated by reporting on experiences with, and feedback from, recipients of visualizations and collaborators.

  3. Mechanisms of eyewitness suggestibility: tests of the explanatory role hypothesis.

    PubMed

    Rindal, Eric J; Chrobak, Quin M; Zaragoza, Maria S; Weihing, Caitlin A

    2017-02-07

    In a recent paper, Chrobak and Zaragoza (Journal of Experimental Psychology: General, 142(3), 827-844, 2013) proposed the explanatory role hypothesis, which posits that the likelihood of developing false memories for post-event suggestions is a function of the explanatory function the suggestion serves. In support of this hypothesis, they provided evidence that participant-witnesses were especially likely to develop false memories for their forced fabrications when their fabrications helped to explain outcomes they had witnessed. In three experiments, we test the generality of the explanatory role hypothesis as a mechanism of eyewitness suggestibility by assessing whether this hypothesis can predict suggestibility errors in (a) situations where the post-event suggestions are provided by the experimenter (as opposed to fabricated by the participant), and (b) across a variety of memory measures and measures of recollective experience. In support of the explanatory role hypothesis, participants were more likely to subsequently freely report (E1) and recollect the suggestions as part of the witnessed event (E2, source test) when the post-event suggestion helped to provide a causal explanation for a witnessed outcome than when it did not serve this explanatory role. Participants were also less likely to recollect the suggestions as part of the witnessed event (on measures of subjective experience) when their explanatory strength had been reduced by the presence of an alternative explanation that could explain the same outcome (E3, source test + warning). Collectively, the results provide strong evidence that the search for explanatory coherence influences people's tendency to misremember witnessing events that were only suggested to them.

  4. Harmonic Resonance in Power Transmission Systems due to the Addition of Shunt Capacitors

    NASA Astrophysics Data System (ADS)

    Patil, Hardik U.

    Shunt capacitors are often added in transmission networks at suitable locations to improve the voltage profile. In this thesis, the transmission system in Arizona is considered as a test bed. Many shunt capacitors already exist in the Arizona transmission system and more are planned to be added. Addition of these shunt capacitors may create resonance conditions in response to harmonic voltages and currents. Such resonance, if it occurs, may create problematic issues in the system. It is main objective of this thesis to identify potential problematic effects that could occur after placing new shunt capacitors at selected buses in the Arizona network. Part of the objective is to create a systematic plan for avoidance of resonance issues. For this study, a method of capacitance scan is proposed. The bus admittance matrix is used as a model of the networked transmission system. The calculations on the admittance matrix were done using Matlab. The test bed is the actual transmission system in Arizona; however, for proprietary reasons, bus names are masked in the thesis copy intended for the public domain. The admittance matrix was obtained from data using the PowerWorld Simulator after equivalencing the 2016 summer peak load (planning case). The full Western Electricity Coordinating Council (WECC) system data were used. The equivalencing procedure retains only the Arizona portion of the WECC. The capacitor scan results for single capacitor placement and multiple capacitor placement cases are presented. Problematic cases are identified in the form of 'forbidden response. The harmonic voltage impact of known sources of harmonics, mainly large scale HVDC sources, is also presented. Specific key results for the study indicated include: (1) The forbidden zones obtained as per the IEEE 519 standard indicates the bus 10 to be the most problematic bus. (2) The forbidden zones also indicate that switching values for the switched shunt capacitor (if used) at bus 3 should be

  5. Explanatory style, dispositional optimism, and reported parental behavior.

    PubMed

    Hjelle, L A; Busch, E A; Warren, J E

    1996-12-01

    The relationship between two cognitive personality constructs (explanatory style and dispositional optimism) and retrospective self-reports of maternal and paternal behavior were investigated. College students (62 men and 145 women) completed the Life Orientation Test, Attributional Style Questionnaire, and Parental Acceptance-Rejection Questionnaire in a single session. As predicted, dispositional optimism was positively correlated with reported maternal and paternal warmth/acceptance and negatively correlated with aggression/hostility, neglect/indifference, and undifferentiated rejection during middle childhood. Unexpectedly, explanatory style was found to be more strongly associated with retrospective reports of paternal as opposed to maternal behavior. The implications of these results for future research concerning the developmental antecedents of differences in explanatory style and dispositional optimism are discussed.

  6. Interdisciplinary and Cross-Cultural Perspectives on Explanatory Coexistence.

    PubMed

    Watson-Jones, Rachel E; Busch, Justin T A; Legare, Cristine H

    2015-10-01

    Natural and supernatural explanations are used to interpret the same events in a number of predictable and universal ways. Yet little is known about how variation in diverse cultural ecologies influences how people integrate natural and supernatural explanations. Here, we examine explanatory coexistence in three existentially arousing domains of human thought: illness, death, and human origins using qualitative data from interviews conducted in Tanna, Vanuatu. Vanuatu, a Melanesian archipelago, provides a cultural context ideal for examining variation in explanatory coexistence due to the lack of industrialization and the relatively recent introduction of Christianity and Western education. We argue for the integration of interdisciplinary methodologies from cognitive science and anthropology to inform research on explanatory coexistence.

  7. Stack and dump: Peak-power scaling by coherent pulse addition in passive cavities

    NASA Astrophysics Data System (ADS)

    Breitkopf, S.; Eidam, T.; Klenke, A.; Carstens, H.; Holzberger, S.; Fill, E.; Schreiber, T.; Krausz, F.; Tünnermann, A.; Pupeza, I.; Limpert, J.

    2015-10-01

    During the last decades femtosecond lasers have proven their vast benefit in both scientific and technological tasks. Nevertheless, one laser feature bearing the tremendous potential for high-field applications, delivering extremely high peak and average powers simultaneously, is still not accessible. This is the performance regime several upcoming applications such as laser particle acceleration require, and therefore, challenge laser technology to the fullest. On the one hand, some state-of-the-art canonical bulk amplifier systems provide pulse peak powers in the range of multi-terawatt to petawatt. On the other hand, concepts for advanced solid-state-lasers, specifically thin disk, slab or fiber systems have shown their capability of emitting high average powers in the kilowatt range with a high wall-plug-efficiency while maintaining an excellent spatial and temporal quality of the output beam. In this article, a brief introduction to a concept for a compact laser system capable of simultaneously providing high peak and average powers all along with a high wall-plug efficiency will be given. The concept relies on the stacking of a pulse train emitted from a high-repetitive femtosecond laser system in a passive enhancement cavity, also referred to as temporal coherent combining. In this manner, the repetition rate is decreased in favor of a pulse energy enhancement by the same factor while the average power is almost preserved. The key challenge of this concept is a fast, purely reflective switching element that allows for the dumping of the enhanced pulse out of the cavity. Addressing this challenge could, for the first time, allow for the highly efficient extraction of joule-class pulses at megawatt average power levels and thus lead to a whole new area of applications for ultra-fast laser systems.

  8. PowerPoint Presentations: A Creative Addition to the Research Process.

    ERIC Educational Resources Information Center

    Perry, Alan E.

    2003-01-01

    Contends that the requirement of a PowerPoint presentation as part of the research process would benefit students in the following ways: learning how to conduct research; starting their research project sooner; honing presentation and public speaking skills; improving cooperative and social skills; and enhancing technology skills. Outlines the…

  9. The effectiveness of power-generating complexes constructed on the basis of nuclear power plants combined with additional sources of energy determined taking risk factors into account

    NASA Astrophysics Data System (ADS)

    Aminov, R. Z.; Khrustalev, V. A.; Portyankin, A. V.

    2015-02-01

    The effectiveness of combining nuclear power plants equipped with water-cooled water-moderated power-generating reactors (VVER) with other sources of energy within unified power-generating complexes is analyzed. The use of such power-generating complexes makes it possible to achieve the necessary load pickup capability and flexibility in performing the mandatory selective primary and emergency control of load, as well as participation in passing the night minimums of electric load curves while retaining high values of the capacity utilization factor of the entire power-generating complex at higher levels of the steam-turbine part efficiency. Versions involving combined use of nuclear power plants with hydrogen toppings and gas turbine units for generating electricity are considered. In view of the fact that hydrogen is an unsafe energy carrier, the use of which introduces additional elements of risk, a procedure for evaluating these risks under different conditions of implementing the fuel-and-hydrogen cycle at nuclear power plants is proposed. Risk accounting technique with the use of statistical data is considered, including the characteristics of hydrogen and gas pipelines, and the process pipelines equipment tightness loss occurrence rate. The expected intensities of fires and explosions at nuclear power plants fitted with hydrogen toppings and gas turbine units are calculated. In estimating the damage inflicted by events (fires and explosions) occurred in nuclear power plant turbine buildings, the US statistical data were used. Conservative scenarios of fires and explosions of hydrogen-air mixtures in nuclear power plant turbine buildings are presented. Results from calculations of the introduced annual risk to the attained net annual profit ratio in commensurable versions are given. This ratio can be used in selecting projects characterized by the most technically attainable and socially acceptable safety.

  10. Improving Performance of Power Systems with Large-scale Variable Generation Additions

    SciTech Connect

    Makarov, Yuri V.; Etingov, Pavel V.; Samaan, Nader A.; Lu, Ning; Ma, Jian; Subbarao, Krishnappa; Du, Pengwei; Kannberg, Landis D.

    2012-07-22

    A power system with large-scale renewable resources, like wind and solar generation, creates significant challenges to system control performance and reliability characteristics because of intermittency and uncertainties associated with variable generation. It is important to quantify these uncertainties, and then incorporate this information into decision-making processes and power system operations. This paper presents three approaches to evaluate the flexibility needed from conventional generators and other resources in the presence of variable generation as well as provide this flexibility from a non-traditional resource – wide area energy storage system. These approaches provide operators with much-needed information on the likelihood and magnitude of ramping and capacity problems, and the ability to dispatch available resources in response to such problems.

  11. Coherent addition of high power laser diode array with a V-shape external Talbot cavity.

    PubMed

    Liu, B; Liu, Y; Braiman, Y

    2008-12-08

    We designed a V-shape external Talbot cavity for a broad-area laser diode array and demonstrated coherent laser beam combining at high power with narrow spectral linewidth. The V-shape external Talbot cavity provides good mode-discrimination and does not require a spatial filter. A multi-lobe far-field profile generated by a low filling-factor phase-locked array is confirmed by our numerical simulation.

  12. Inconsistency with Prior Knowledge Triggers Children's Causal Explanatory Reasoning

    ERIC Educational Resources Information Center

    Legare, Cristine H.; Gelman, Susan A.; Wellman, Henry M.

    2010-01-01

    What events trigger causal explanatory reasoning in young children? Children's explanations could be triggered by either consistent events (suggesting that explanations serve a confirmatory function) or inconsistent events (suggesting that they promote discovery of new information). In 2 studies with preschool children (N = 80), events that were…

  13. Preschoolers' Search for Explanatory Information within Adult-Child Conversation

    ERIC Educational Resources Information Center

    Frazier, Brandy N.; Gelman, Susan A.; Wellman, Henry M.

    2009-01-01

    This research examined children's questions and the reactions to the answers they receive in conversations with adults. If children actively seek explanatory knowledge, they should react differently depending on whether they receive a causal explanation. Study 1 examined conversations following 6 preschoolers' (ages 2-4 years) causal questions in…

  14. 29 CFR 780.1001 - General explanatory statement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... 29 Labor 3 2012-07-01 2012-07-01 false General explanatory statement. 780.1001 Section 780.1001 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  15. 29 CFR 780.1001 - General explanatory statement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... 29 Labor 3 2014-07-01 2014-07-01 false General explanatory statement. 780.1001 Section 780.1001 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  16. 29 CFR 780.1001 - General explanatory statement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... 29 Labor 3 2010-07-01 2010-07-01 false General explanatory statement. 780.1001 Section 780.1001 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  17. 29 CFR 780.1001 - General explanatory statement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... 29 Labor 3 2011-07-01 2011-07-01 false General explanatory statement. 780.1001 Section 780.1001 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  18. 29 CFR 780.1001 - General explanatory statement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Employment of Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child... 29 Labor 3 2013-07-01 2013-07-01 false General explanatory statement. 780.1001 Section 780.1001 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...

  19. Categorization and Analysis of Explanatory Writing in Mathematics

    ERIC Educational Resources Information Center

    Craig, Tracy S.

    2011-01-01

    The aim of this article is to present a scheme for coding and categorizing students' written explanations of mathematical problem-solving activities. The scheme was used successfully within a study project carried out to determine whether student problem-solving behaviour could be positively affected by writing explanatory strategies to…

  20. XS-O: A Self-Explanatory School Computer.

    ERIC Educational Resources Information Center

    Nievergelt, J.; And Others

    XS-O is a low-cost interactive system that serves as a self-explanatory school computer. The machine dialog is easy to follow for the inexperienced user. The system includes a course on computer programming, a programming system for writing, editing, executing, and debugging programs interactively, and a filing system containing private and public…

  1. The Use of Representations and Argumentative and Explanatory Situations

    ERIC Educational Resources Information Center

    Oliveira, Daniela Kênia B. S.; Justi, Rosária; Mendonça, Paula Cristina Cardoso

    2015-01-01

    This paper discusses the use of non-verbal representations in a modelling-based science teaching context, in which argumentative and explanatory situations occur. More specifically, we analyse how the students and teacher use representations in their discourse in modelling activities, and we discuss the relationships between the functions of these…

  2. Examining Explanatory Biases in Young Children's Biological Reasoning

    ERIC Educational Resources Information Center

    Legare, Cristine H.; Gelman, Susan A.

    2014-01-01

    Despite the well-established literature on explanation in early childhood, little is known about what constrains children's explanations. State change and negative outcomes were examined as potential explanatory biases in the domain of naïve biology, extending upon previous work in the domain of naïve physics. In two studies, preschool children…

  3. Divergent Explanatory Production (DEP): The Relationship between Resilience and Creativity

    ERIC Educational Resources Information Center

    Hernández, Óscar Sánchez; Méndez, Francisco Xavier; Garber, Judy

    2015-01-01

    Introduction: The aim of the study is to describe and analyze a new test and construct, Divergent Explanatory Production (DEP), defined as the ability to observe adverse situations from various points of view. At the theoretical level, it is a bridge between the reformulated model of learned helplessness (as a resilience model), and creative…

  4. Explanatory Model for Sound Amplification in a Stethoscope

    ERIC Educational Resources Information Center

    Eshach, H.; Volfson, A.

    2015-01-01

    In the present paper we suggest an original physical explanatory model that explains the mechanism of the sound amplification process in a stethoscope. We discuss the amplification of a single pulse, a continuous wave of certain frequency, and finally we address the resonant frequencies. It is our belief that this model may provide students with…

  5. Evaluation of Different Power of Near Addition in Two Different Multifocal Intraocular Lenses

    PubMed Central

    Unsal, Ugur; Baser, Gonen

    2016-01-01

    Purpose. To compare near, intermediate, and distance vision and quality of vision, when refractive rotational multifocal intraocular lenses with 3.0 diopters or diffractive multifocal intraocular lenses with 2.5 diopters near addition are implanted. Methods. 41 eyes of 41 patients in whom rotational +3.0 diopters near addition IOLs were implanted and 30 eyes of 30 patients in whom diffractive +2.5 diopters near addition IOLs were implanted after cataract surgery were reviewed. Uncorrected and corrected distance visual acuity, intermediate visual acuity, near visual acuity, and patient satisfaction were evaluated 6 months later. Results. The corrected and uncorrected distance visual acuity were the same between both groups (p = 0.50 and p = 0.509, resp.). The uncorrected intermediate and corrected intermediate and near vision acuities were better in the +2.5 near vision added intraocular lens implanted group (p = 0.049, p = 0.005, and p = 0.001, resp.) and the uncorrected near vision acuity was better in the +3.0 near vision added intraocular lens implanted group (p = 0.001). The patient satisfactions of both groups were similar. Conclusion. The +2.5 diopters near addition could be a better choice in younger patients with more distance and intermediate visual requirements (driving, outdoor activities), whereas the + 3.0 diopters should be considered for patients with more near vision correction (reading). PMID:27340560

  6. Effect of ferrite addition above the base ferrite on the coupling factor of wireless power transfer for vehicle applications

    NASA Astrophysics Data System (ADS)

    Batra, T.; Schaltz, E.; Ahn, S.

    2015-05-01

    Power transfer capability of wireless power transfer systems is highly dependent on the magnetic design of the primary and secondary inductors and is measured quantitatively by the coupling factor. The inductors are designed by placing the coil over a ferrite base to increase the coupling factor and reduce magnetic emissions to the surroundings. Effect of adding extra ferrite above the base ferrite at different physical locations on the self-inductance, mutual inductance, and coupling factor is under investigation in this paper. The addition can increase or decrease the mutual inductance depending on the placement of ferrite. Also, the addition of ferrite increases the self-inductance of the coils, and there is a probability for an overall decrease in the coupling factor. Correct placement of ferrite, on the other hand, can increase the coupling factor relatively higher than the base ferrite as it is closer to the other inductor. Ferrite being a heavy compound of iron increases the inductor weight significantly and needs to be added judiciously. Four zones have been identified in the paper, which shows different sensitivity to addition of ferrite in terms of the two inductances and coupling factor. Simulation and measurement results are presented for different air gaps between the coils and at different gap distances between the ferrite base and added ferrite. This paper is beneficial in improving the coupling factor while adding minimum weight to wireless power transfer system.

  7. Explanatory model for sound amplification in a stethoscope

    NASA Astrophysics Data System (ADS)

    Eshach, H.; Volfson, A.

    2015-01-01

    In the present paper we suggest an original physical explanatory model that explains the mechanism of the sound amplification process in a stethoscope. We discuss the amplification of a single pulse, a continuous wave of certain frequency, and finally we address the resonant frequencies. It is our belief that this model may provide students with opportunities to not only better understand the amplification mechanism of a stethoscope, but also to strengthen their understanding of sound, pressure, waves, resonance modes, etc.

  8. The Use of Representations and Argumentative and Explanatory Situations

    NASA Astrophysics Data System (ADS)

    Oliveira, Daniela Kênia B. S.; Justi, Rosária; Cardoso Mendonça, Paula Cristina

    2015-06-01

    This paper discusses the use of non-verbal representations in a modelling-based science teaching context, in which argumentative and explanatory situations occur. More specifically, we analyse how the students and teacher use representations in their discourse in modelling activities, and we discuss the relationships between the functions of these representations and the demands of the explanatory and argumentative situations that exist in that classroom. The data were collected by video recording all the classes in which a teaching sequence about intermolecular interactions was used-a topic which the students had not previously studied. In the activities, the students had to create, express, test, and discuss models in order to understand the difference between intermolecular and interatomic interactions, as well as their influences on the properties of substances. Initially, we selected excerpts of the recorded classes in which a non-verbal representation was used. Then, we used criteria to identify the argumentative and explanatory situations (previously defined), and we created categories for the functions of the representations that were used in order to analyse all the identified situations. The analysis supports conclusions indicating the relevance of the use of non-verbal representations in the construction, use, and defence of explanations. As the defence of explanations was the main context in which argumentative situations occurred in this study, our conclusions also indicate the contribution that representations make towards changing the status of the students' explanations.

  9. Enhancing Specific Energy and Power in Asymmetric Supercapacitors - A Synergetic Strategy based on the Use of Redox Additive Electrolytes

    PubMed Central

    Singh, Arvinder; Chandra, Amreesh

    2016-01-01

    The strategy of using redox additive electrolyte in combination with multiwall carbon nanotubes/metal oxide composites leads to a substantial improvements in the specific energy and power of asymmetric supercapacitors (ASCs). When the pure electrolyte is optimally modified with a redox additive viz., KI, ~105% increase in the specific energy is obtained with good cyclic stability over 3,000 charge-discharge cycles and ~14.7% capacitance fade. This increase is a direct consequence of the iodine/iodide redox pairs that strongly modifies the faradaic and non-faradaic type reactions occurring on the surface of the electrodes. Contrary to what is shown in few earlier reports, it is established that indiscriminate increase in the concentration of redox additives will leads to performance loss. Suitable explanations are given based on theoretical laws. The specific energy or power values being reported in the fabricated ASCs are comparable or higher than those reported in ASCs based on toxic acetonitrile or expensive ionic liquids. The paper shows that the use of redox additive is economically favorable strategy for obtaining cost effective and environmentally friendly ASCs. PMID:27184260

  10. Enhancing Specific Energy and Power in Asymmetric Supercapacitors - A Synergetic Strategy based on the Use of Redox Additive Electrolytes.

    PubMed

    Singh, Arvinder; Chandra, Amreesh

    2016-05-17

    The strategy of using redox additive electrolyte in combination with multiwall carbon nanotubes/metal oxide composites leads to a substantial improvements in the specific energy and power of asymmetric supercapacitors (ASCs). When the pure electrolyte is optimally modified with a redox additive viz., KI, ~105% increase in the specific energy is obtained with good cyclic stability over 3,000 charge-discharge cycles and ~14.7% capacitance fade. This increase is a direct consequence of the iodine/iodide redox pairs that strongly modifies the faradaic and non-faradaic type reactions occurring on the surface of the electrodes. Contrary to what is shown in few earlier reports, it is established that indiscriminate increase in the concentration of redox additives will leads to performance loss. Suitable explanations are given based on theoretical laws. The specific energy or power values being reported in the fabricated ASCs are comparable or higher than those reported in ASCs based on toxic acetonitrile or expensive ionic liquids. The paper shows that the use of redox additive is economically favorable strategy for obtaining cost effective and environmentally friendly ASCs.

  11. Enhancing Specific Energy and Power in Asymmetric Supercapacitors - A Synergetic Strategy based on the Use of Redox Additive Electrolytes

    NASA Astrophysics Data System (ADS)

    Singh, Arvinder; Chandra, Amreesh

    2016-05-01

    The strategy of using redox additive electrolyte in combination with multiwall carbon nanotubes/metal oxide composites leads to a substantial improvements in the specific energy and power of asymmetric supercapacitors (ASCs). When the pure electrolyte is optimally modified with a redox additive viz., KI, ~105% increase in the specific energy is obtained with good cyclic stability over 3,000 charge-discharge cycles and ~14.7% capacitance fade. This increase is a direct consequence of the iodine/iodide redox pairs that strongly modifies the faradaic and non-faradaic type reactions occurring on the surface of the electrodes. Contrary to what is shown in few earlier reports, it is established that indiscriminate increase in the concentration of redox additives will leads to performance loss. Suitable explanations are given based on theoretical laws. The specific energy or power values being reported in the fabricated ASCs are comparable or higher than those reported in ASCs based on toxic acetonitrile or expensive ionic liquids. The paper shows that the use of redox additive is economically favorable strategy for obtaining cost effective and environmentally friendly ASCs.

  12. The Social Explanatory Styles Questionnaire: Assessing Moderators of Basic Social-Cognitive Phenomena Including Spontaneous Trait Inference, the Fundamental Attribution Error, and Moral Blame

    PubMed Central

    Gill, Michael J.; Andreychik, Michael R.

    2014-01-01

    Why is he poor? Why is she failing academically? Why is he so generous? Why is she so conscientious? Answers to such everyday questions—social explanations—have powerful effects on relationships at the interpersonal and societal levels. How do people select an explanation in particular cases? We suggest that, often, explanations are selected based on the individual's pre-existing general theories of social causality. More specifically, we suggest that over time individuals develop general beliefs regarding the causes of social events. We refer to these beliefs as social explanatory styles. Our goal in the present article is to offer and validate a measure of individual differences in social explanatory styles. Accordingly, we offer the Social Explanatory Styles Questionnaire (SESQ), which measures three independent dimensions of social explanatory style: Dispositionism, historicism, and controllability. Studies 1–3 examine basic psychometric properties of the SESQ and provide positive evidence regarding internal consistency, factor structure, and both convergent and divergent validity. Studies 4–6 examine predictive validity for each subscale: Does each explanatory dimension moderate an important phenomenon of social cognition? Results suggest that they do. In Study 4, we show that SESQ dispositionism moderates the tendency to make spontaneous trait inferences. In Study 5, we show that SESQ historicism moderates the tendency to commit the Fundamental Attribution Error. Finally, in Study 6 we show that SESQ controllability predicts polarization of moral blame judgments: Heightened blaming toward controllable stigmas (assimilation), and attenuated blaming toward uncontrollable stigmas (contrast). Decades of research suggest that explanatory style regarding the self is a powerful predictor of self-functioning. We think it is likely that social explanatory styles—perhaps comprising interactive combinations of the basic dimensions tapped by the SESQ—will be

  13. The Social Explanatory Styles Questionnaire: assessing moderators of basic social-cognitive phenomena including spontaneous trait inference, the fundamental attribution error, and moral blame.

    PubMed

    Gill, Michael J; Andreychik, Michael R

    2014-01-01

    Why is he poor? Why is she failing academically? Why is he so generous? Why is she so conscientious? Answers to such everyday questions--social explanations--have powerful effects on relationships at the interpersonal and societal levels. How do people select an explanation in particular cases? We suggest that, often, explanations are selected based on the individual's pre-existing general theories of social causality. More specifically, we suggest that over time individuals develop general beliefs regarding the causes of social events. We refer to these beliefs as social explanatory styles. Our goal in the present article is to offer and validate a measure of individual differences in social explanatory styles. Accordingly, we offer the Social Explanatory Styles Questionnaire (SESQ), which measures three independent dimensions of social explanatory style: Dispositionism, historicism, and controllability. Studies 1-3 examine basic psychometric properties of the SESQ and provide positive evidence regarding internal consistency, factor structure, and both convergent and divergent validity. Studies 4-6 examine predictive validity for each subscale: Does each explanatory dimension moderate an important phenomenon of social cognition? Results suggest that they do. In Study 4, we show that SESQ dispositionism moderates the tendency to make spontaneous trait inferences. In Study 5, we show that SESQ historicism moderates the tendency to commit the Fundamental Attribution Error. Finally, in Study 6 we show that SESQ controllability predicts polarization of moral blame judgments: Heightened blaming toward controllable stigmas (assimilation), and attenuated blaming toward uncontrollable stigmas (contrast). Decades of research suggest that explanatory style regarding the self is a powerful predictor of self-functioning. We think it is likely that social explanatory styles--perhaps comprising interactive combinations of the basic dimensions tapped by the SESQ--will be

  14. Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM)

    NASA Astrophysics Data System (ADS)

    Sridharan, Niyanth; Norfolk, Mark; Babu, Sudarsanam Suresh

    2016-05-01

    Ultrasonic additive manufacturing is a solid-state additive manufacturing technique that utilizes ultrasonic vibrations to bond metal tapes into near net-shaped components. The major advantage of this process is the ability to manufacture layered structures with dissimilar materials without any intermetallic formation. Majority of the published literature had focused only on the bond formation mechanism in Aluminum alloys. The current work pertains to explain the microstructure evolution during dissimilar joining of iron and tantalum using very high power ultrasonic additive manufacturing and characterization of the interfaces using electron back-scattered diffraction and Nano-indentation measurement. The results showed extensive grain refinement at the bonded interfaces of these metals. This phenomenon was attributed to continuous dynamic recrystallization process driven by the high strain rate plastic deformation and associated adiabatic heating that is well below 50 pct of melting point of both iron and Ta.

  15. An explanatory model of physics faculty conceptions about the problem-solving process

    NASA Astrophysics Data System (ADS)

    Kuo, Hsia-Po Vincent

    One commonly stated instructor goal for an introductory calculus-based physics course is to improve students' problem-solving skills. There is, however, a growing body of research evidence to suggest that this goal is not frequently accomplished in a typical college or university physics course. In response to this evidence, researchers and curriculum developers have developed a wide variety of curricular materials and instructional strategies that have been shown to be more effective in improving student problem solving performance. In spite of the availability of these materials and strategies, relatively few physics instructors have chosen to use them. One likely reason is that these materials and strategies are not consistent with the ways that physics instructors think about the teaching and learning of problem solving. This has led the Physics Education Research Group at the University of Minnesota to undertake a multistage research program to understand physics instructors' conceptions about the teaching and learning of problem solving. In the first stage, semi-structured interviews with higher education physics instructors in Minnesota were conducted. Based on an in-depth analysis of interview transcripts with six research university physics instructors, an initial explanatory model was developed that described the range and nature of conceptions for these instructors. Part of this initial model identified these instructors' conceptions of the problem-solving process. Around the same time, interviews were also conducted with 24 additional instructors from other types of higher education institutions in Minnesota. The current study is the second stage of that research program. The goal of this study is to modify and refine the part of the initial explanatory model dealing with instructor conceptions about the problem-solving process using the 24 additional interviews. With the expanded sample, this current study seeks to converge on a more viable explanatory

  16. Racialized customer service in restaurants: a quantitative assessment of the statistical discrimination explanatory framework.

    PubMed

    Brewster, Zachary W

    2012-01-01

    Despite popular claims that racism and discrimination are no longer salient issues in contemporary society, racial minorities continue to experience disparate treatment in everyday public interactions. The context of full-service restaurants is one such public setting wherein racial minority patrons, African Americans in particular, encounter racial prejudices and discriminate treatment. To further understand the causes of such discriminate treatment within the restaurant context, this article analyzes primary survey data derived from a community sample of servers (N = 200) to assess the explanatory power of one posited explanation—statistical discrimination. Taken as a whole, findings suggest that while a statistical discrimination framework toward understanding variability in servers’ discriminatory behaviors should not be disregarded, the framework’s explanatory utility is limited. Servers’ inferences about the potential profitability of waiting on customers across racial groups explain little of the overall variation in subjects’ self-reported discriminatory behaviors, thus suggesting that other factors not explored in this research are clearly operating and should be the focus of future inquires.

  17. Explanatory Models and Illness Experience of People Living with HIV

    PubMed Central

    2016-01-01

    Research into explanatory models of disease and illness typically explores people’s conceptual understanding, and emphasizes differences between patient and provider models. However, the explanatory models framework of etiology, time and mode of onset of symptoms, pathophysiology, course of sickness, and treatment is built on categories characteristic of biomedical understanding. It is unclear how well these map onto people’s lived experience of illness, and to the extent they do, how they translate. Scholars have previously studied the experience of people living with HIV through the lenses of stigma and identity theory. Here, through in-depth qualitative interviews with 32 people living with HIV in the northeast United States, we explored the experience and meanings of living with HIV more broadly using the explanatory models framework. We found that identity reformation is a major challenge for most people following the HIV diagnosis, and can be understood as a central component of the concept of course of illness. Salient etiological explanations are not biological, but rather social, such as betrayal, or living in a specific cultural milieu, and often self-evaluative. Given that symptoms can now largely be avoided through adherence to treatment, they are most frequently described in terms of observation of others who have not been adherent, or the resolution of symptoms following treatment. The category of pathophysiology is not ordinarily very relevant to the illness experience, as few respondents have any understanding of the mechanism of pathogenesis in HIV, nor much interest in it. Treatment has various personal meanings, both positive and negative, often profound. For people to engage successfully in treatment and live successfully with HIV, mechanistic explanation is of little significance. Rather, positive psychological integration of health promoting behaviors is of central importance. PMID:26971285

  18. Mexican immigrants' explanatory model of latent tuberculosis infection.

    PubMed

    McEwen, Marylyn M

    2005-10-01

    This article reveals how the multiple and disparate explanations of latent tuberculosis infection (LTBI) from the U.S. and Mexico professional health sectors and the popular sector are used to inform the explanatory model (EM) of LTBI for Mexican immigrants residing in the U.S.-Mexico border region. Fourteen immigrants, nine diagnosed with LTBI (n = 9) and their spouses (n = 5) participated in this critical ethnographic study. Because care seeking and treatment decisions are influenced by EMs, the results indicate that it is imperative that interventions for Mexican immigrants with LTBI are built on an understanding of their illness experience and are contextually meaningful.

  19. Perspectives about depression: explanatory models among African-American women.

    PubMed

    Waite, Roberta; Killian, Priscilla

    2009-08-01

    Depression is a costly illness, with broad social, economic and personal consequences. It affects many black women, yet only 7% of them receive traditional treatment. Given the chronic nature of depression and its broad impact on women's wellness, there is a need for more research examining both the conceptualization and the interpretation of depression within a socio-cultural context. This qualitative descriptive study used Kleinman's explanatory framework to capture focus group data from 14 African-American women recruited from a primary care center. Data was organized and managed with Atlas/ti 5.12, while content analysis was used to disclose the relevant themes presented in the paper.

  20. Analysis of contingency tables based on generalised median polish with power transformations and non-additive models.

    PubMed

    Klawonn, Frank; Jayaram, Balasubramaniam; Crull, Katja; Kukita, Akiko; Pessler, Frank

    2013-01-01

    Contingency tables are a very common basis for the investigation of effects of different treatments or influences on a disease or the health state of patients. Many journals put a strong emphasis on p-values to support the validity of results. Therefore, even small contingency tables are analysed by techniques like t-test or ANOVA. Both these concepts are based on normality assumptions for the underlying data. For larger data sets, this assumption is not so critical, since the underlying statistics are based on sums of (independent) random variables which can be assumed to follow approximately a normal distribution, at least for a larger number of summands. But for smaller data sets, the normality assumption can often not be justified. Robust methods like the Wilcoxon-Mann-Whitney-U test or the Kruskal-Wallis test do not lead to statistically significant p-values for small samples. Median polish is a robust alternative to analyse contingency tables providing much more insight than just a p-value. Median polish is a technique that provides more information than just a p-value. It explains the contingency table in terms of an overall effect, row and columns effects and residuals. The underlying model for median polish is an additive model which is sometimes too restrictive. In this paper, we propose two related approach to generalise median polish. A power transformation can be applied to the values in the table, so that better results for median polish can be achieved. We propose a graphical method how to find a suitable power transformation. If the original data should be preserved, one can apply other transformations - based on so-called additive generators - that have an inverse transformation. In this way, median polish can be applied to the original data, but based on a non-additive model. The non-linearity of such a model can also be visualised to better understand the joint effects of rows and columns in a contingency table.

  1. Building ceramics with an addition of pulverized combustion fly ash from the thermal power plant Nováky

    NASA Astrophysics Data System (ADS)

    Húlan, Tomáš; Trník, Anton; Medved, Igor; Štubňa, Igor; Kaljuvee, Tiit

    2016-07-01

    Pulverized combustion fly ash (PFA) from the Power plant Nováky (Slovakia) is analyzed for its potential use in the production of building ceramics. Three materials are used to prepare the mixtures: illite-rich clay (IRC), PFA and IRC fired at 1000 °C (called grog). The mixtures contain 60 % of IRC and 40 % of a non-plastic compound (grog or PFA). A various amount of the grog is replaced by PFA and the effect of this substitution is studied. Thermal analyses (TGA, DTA, thermodilatometry, and dynamical thermomechanical analysis) are used to analyze the processes occurring during firing. The flexural strength and thermal conductivity are determined at room temperature after firing in the temperature interval from 800 to 1100 °C. The results show that an addition of PFA slightly decreases the flexural strength. The thermal conductivity and porosity are practically unaffected by the presence of PFA. Thus, PFA from the Power plant Nováky is a convenient non-plastic component for manufacturing building ceramics.

  2. A 10-kW SiC Inverter with A Novel Printed Metal Power Module With Integrated Cooling Using Additive Manufacturing

    SciTech Connect

    Chinthavali, Madhu Sudhan; Ayers, Curtis William; Campbell, Steven L; Wiles, Randy H; Ozpineci, Burak

    2014-01-01

    With efforts to reduce the cost, size, and thermal management systems for the power electronics drivetrain in hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs), wide band gap semiconductors including silicon carbide (SiC) have been identified as possibly being a partial solution. This paper focuses on the development of a 10-kW all SiC inverter using a high power density, integrated printed metal power module with integrated cooling using additive manufacturing techniques. This is the first ever heat sink printed for a power electronics application. About 50% of the inverter was built using additive manufacturing techniques.

  3. Explanatory Supplement to the WISE All-Sky Release Products

    NASA Technical Reports Server (NTRS)

    2012-01-01

    The Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010) surveyed the entire sky at 3.4, 4.6, 12 and 22 microns in 2010, achieving 5-sigma point source sensitivities per band better than 0.08, 0.11, 1 and 6 mJy in unconfused regions on the ecliptic. The WISE All-Sky Data Release, conducted on March 14, 2012, incorporates all data taken during the full cryogenic mission phase, 7 January 2010 to 6 August 20l0,that were processed with improved calibrations and reduction algorithms. Release data products include: (1) an Atlas of 18,240 match-filtered, calibrated and coadded image sets; (2) a Source Catalog containing positions and four-band photometry for over 563 million objects, and (3) an Explanatory Supplement. Ancillary products include a Reject Table that contains 284 million detections that were not selected for the Source Catalog because they are low signal-to-noise ratio or spurious detections of image artifacts, an archive of over 1.5 million sets of calibrated WISE Single-exposure images, and a database of 9.4 billion source extractions from those single images, and moving object tracklets identified by the NEOWISE program (Mainzer et aI. 2011). The WISE All-Sky Data Release products supersede those from the WISE Preliminary Data Release (Cutri et al. 2011). The Explanatory Supplement to the WISE All-Sky Data Release Products is a general guide for users of the WISE data. The Supplement contains an overview of the WISE mission, facilities, and operations, a detailed description of WISE data processing algorithms, a guide to the content and formals of the image and tabular data products, and cautionary notes that describe known limitations of the All-Sky Release products. Instructions for accessing the WISE data products via the services of the NASA/IPAC Infrared Science Archive are provided. The Supplement also provides analyses of the achieved sky coverage, photometric and astrometric characteristics and completeness and reliability of the All

  4. An Explanatory Model of Self-Service on the Internet

    NASA Astrophysics Data System (ADS)

    Oliver, Dave; Livermore, Celia Romm; Farag, Neveen Awad

    This chapter describes research that identifies and classifies the dimensions of self-service activity enabled through the Internet. Self-service is effected by organizations providing ways and means whereby customers perform tasks related to the procurement of goods and services. We describe how an instrument used to measure Internet-based self-service was developed, validated and applied. The results from applying the instrument to a large number of Web sites, covering a range of industries, countries and cultures, are analyzed and discussed. The study presents a model in which type of industry, level of technological development, income and cultural factors are proposed as explanatory variables for Web-based self-service. We conclude with an assessment of this program of research’s achievements so far.

  5. Categorization and analysis of explanatory writing in mathematics

    NASA Astrophysics Data System (ADS)

    Craig, Tracy S.

    2011-10-01

    The aim of this article is to present a scheme for coding and categorizing students' written explanations of mathematical problem-solving activities. The scheme was used successfully within a study project carried out to determine whether student problem-solving behaviour could be positively affected by writing explanatory strategies to mathematical problem-solving processes. The rationale for the study was the recognized importance of mathematical problem-solving, the widely acknowledged challenge of teaching problem-solving skills directly and the evidence in the literature that writing in mathematics provides a tool for learning. The study was carried out in a first-year mathematics course at the University of Cape Town, South Africa. Students' written submissions were categorized and analysed through use of an adaptation of a journal entry classification scheme. The scheme successfully observed positive changes over the experimental period in students' level of engagement with the mathematical material and with their stance towards knowledge.

  6. A power comparison of generalized additive models and the spatial scan statistic in a case-control setting

    PubMed Central

    2010-01-01

    Background A common, important problem in spatial epidemiology is measuring and identifying variation in disease risk across a study region. In application of statistical methods, the problem has two parts. First, spatial variation in risk must be detected across the study region and, second, areas of increased or decreased risk must be correctly identified. The location of such areas may give clues to environmental sources of exposure and disease etiology. One statistical method applicable in spatial epidemiologic settings is a generalized additive model (GAM) which can be applied with a bivariate LOESS smoother to account for geographic location as a possible predictor of disease status. A natural hypothesis when applying this method is whether residential location of subjects is associated with the outcome, i.e. is the smoothing term necessary? Permutation tests are a reasonable hypothesis testing method and provide adequate power under a simple alternative hypothesis. These tests have yet to be compared to other spatial statistics. Results This research uses simulated point data generated under three alternative hypotheses to evaluate the properties of the permutation methods and compare them to the popular spatial scan statistic in a case-control setting. Case 1 was a single circular cluster centered in a circular study region. The spatial scan statistic had the highest power though the GAM method estimates did not fall far behind. Case 2 was a single point source located at the center of a circular cluster and Case 3 was a line source at the center of the horizontal axis of a square study region. Each had linearly decreasing logodds with distance from the point. The GAM methods outperformed the scan statistic in Cases 2 and 3. Comparing sensitivity, measured as the proportion of the exposure source correctly identified as high or low risk, the GAM methods outperformed the scan statistic in all three Cases. Conclusions The GAM permutation testing methods

  7. Unraveling the fundamental mechanisms of solvent-additive-induced optimization of power conversion efficiencies in organic photovoltaic devices

    SciTech Connect

    Herath, Nuradhika; Das, Sanjib; Zhu, Jiahua; Kumar, Rajeev; Chen, Jihua; Xiao, Kai; Gu, Gong; Browning, James F.; Sumpter, Bobby G.; Ivanov, Ilia N.; Lauter, Valeria

    2016-07-12

    The realization of controllable morphologies of bulk heterojunction (BHJ) in organic photovoltics (OPVs) is one of the key factors in obtaining high-efficiency devices. Here via simultaneous monitoring of the three-dimensional nanostructural modifications in BHJ correlated with the optical analysis and theoretical modeling of charge transport, we provide new insights into the fundamental mechanisms essential for the optimization of (power conversion efficiency) PCEs with additive processing. Our results demonstrate how a trace amount of diiodooctane (DIO) remarkably changes the vertical phase morphology of the active layers resulting in formation of a well-mixed donor-acceptor compact film, augments charge transfer and PCEs. In contrast, excess amount of DIO promotes a massive reordering and results loosely packed mixed phase vertical phase morphology with large clusters leading to deterioration in PCEs. Theoretical modeling of charge transport reveals that DIO increases the mobility of electrons and holes (the charge carriers) by affecting the energetic disorder and electric field dependence of the mobility. Our results show the significant of phase separation and carrier transport pathways to achieve optimal device performances.

  8. Unraveling the fundamental mechanisms of solvent-additive-induced optimization of power conversion efficiencies in organic photovoltaic devices

    DOE PAGES

    Herath, Nuradhika; Das, Sanjib; Zhu, Jiahua; ...

    2016-07-12

    The realization of controllable morphologies of bulk heterojunction (BHJ) in organic photovoltics (OPVs) is one of the key factors in obtaining high-efficiency devices. Here via simultaneous monitoring of the three-dimensional nanostructural modifications in BHJ correlated with the optical analysis and theoretical modeling of charge transport, we provide new insights into the fundamental mechanisms essential for the optimization of (power conversion efficiency) PCEs with additive processing. Our results demonstrate how a trace amount of diiodooctane (DIO) remarkably changes the vertical phase morphology of the active layers resulting in formation of a well-mixed donor-acceptor compact film, augments charge transfer and PCEs. Inmore » contrast, excess amount of DIO promotes a massive reordering and results loosely packed mixed phase vertical phase morphology with large clusters leading to deterioration in PCEs. Theoretical modeling of charge transport reveals that DIO increases the mobility of electrons and holes (the charge carriers) by affecting the energetic disorder and electric field dependence of the mobility. Our results show the significant of phase separation and carrier transport pathways to achieve optimal device performances.« less

  9. Explanatory Supplement to the NEOWISE Data Release Products

    NASA Astrophysics Data System (ADS)

    Cutri, R. M.; Mainzer, A.; Conrow, T.; Masci, F.; Bauer, J.; Dailey, J.; Kirkpatrick, J. D.; Fajardo-Acosta, S.; Gelino, C.; Grillmair, C.; Wheelock, S. L.; Yan, L.; Harbut, M.; Beck, R.; Wittman, M.; Wright, E. L.; Masiero, J.; Grav, T.; Sonnett, S.; Nugent, C.; Kramer, E.; Stevenson, R.; Eisenhardt, P. R. M.; Fabinsky, B.; Tholen, D.; Papin, M.; Fowler, J.; McCallon, H.

    2015-03-01

    's survey observations. The Explanatory Supplement to the NEOWISE Data Release Products is a general guide for users of the NEOWISE data. The Supplement contains an overview of the NEOWISE mission, facilities, and operations, a description of the contents and formats of the NEOWISE image and tabular data products, and cautionary notes that describe known limitations of the Release products. Instructions for accessing the NEOWISE data products via the services of the NASA/IPAC Infrared Science Archive are provided. Descriptions of the data processing system and algorithms used to ingest and convert raw NEOWISE images to the calibrated data products are presented, along with assessments of the sky coverage, photometric and astrometric characteristics and completeness and reliability of the NEOWISE Release data products. The NEOWISE Data Release Explanatory Supplement is an on-line document that is updated frequently to provide the most current information for users of the NEOWISE data products. The Explanatory Supplement is maintained at: http://wise2.ipac.caltech.edu/docs/release/neowise/expsup/ NEOWISE is a project of the Jet Propulsion Laboratory/California Institute of Technology, funded by the Planetary Science Division of the National Aeronautics and Space Administration.

  10. Explanatory Supplement to the AllWISE Data Release Products

    NASA Astrophysics Data System (ADS)

    Cutri, R. M.; Wright, E. L.; Conrow, T.; Fowler, J. W.; Eisenhardt, P. R. M.; Grillmair, C.; Kirkpatrick, J. D.; Masci, F.; McCallon, H. L.; Wheelock, S. L.; Fajardo-Acosta, S.; Yan, L.; Benford, D.; Harbut, M.; Jarrett, T.; Lake, S.; Leisawitz, D.; Ressler, M. E.; Stanford, S. A.; Tsai, C. W.; Liu, F.; Helou, G.; Mainzer, A.; Gettings, D.; Gonzalez, A.; Hoffman, D.; Marsh, K. A.; Padgett, D.; Skrutskie, M. F.; Beck, R. P.; Papin, M.; Wittman, M.

    2013-11-01

    The AllWISE program builds upon the successful Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010) mission by combining data from all WISE and NEOWISE (Mainzer et al. 2011) survey phases to form the most comprehensive view of the mid-infrared sky currently available. By combining the data from two complete sky coverage epochs in an advanced data processing system, AllWISE has generated new products that have enhanced photometric sensitivity and accuracy, and improved astrometric precision compared with the earlier WISE All-Sky Data Release. Exploiting the 6 month baseline between the WISE sky coverage epochs enables AllWISE to measure source motions for the first time, and to compute improved flux variability statistics. AllWISE data release products include: a Source Catalog that contains 4-band fluxes, positions, apparent motion measurements, and flux variability statistics for over 747 million objects detected at SNR>5 in the combined exposures; a Multiepoch Photometry Database containing over 42 billion time-tagged, single-exposure fluxes for each object detected on the combined exposures; and an Image Atlas of 18,240 4-band calibrated FITS images, depth-of-coverage and noise maps that cover the sky produced by coadding nearly 7.9 million single-exposure images from the cryogenic and post-cryogenic survey phases. The Explanatory Supplement to the AllWISE Data Release Products is a general guide for users of the AllWISE data. The Supplement contains detailed descriptions of the format and characteristics of the AllWISE data products, as well as a summary of cautionary notes that describe known limitations. The Supplement is an on-line document that is updated frequently to provide the most current information for users of the AllWISE data products. The Explanatory Supplement is maintained at: http://wise2.ipac.caltech.edu/docs/release/allwise/expsup/index.html AllWISE makes use of data from WISE, which is a joint project of the University of

  11. Explaining and Selecting Treatments for Autism: Parental Explanatory Models in Taiwan

    ERIC Educational Resources Information Center

    Shyu, Yea-Ing Lotus; Tsai, Jia-Ling; Tsai, Wen-Che

    2010-01-01

    Parental explanatory models about autism influence the type of therapy a child receives, the child's well-being, and the parents' own psychological adaptation. This qualitative study explored explanatory models used by parents of children with autism. In-depth interviews were conducted with 13 parents of children with autism from a medical center…

  12. Adapting the Concept of Explanatory Models of Illness to the Study of Youth Violence

    ERIC Educational Resources Information Center

    Biering, Pall

    2007-01-01

    This study explores the feasibility of adapting Kleinman's concept of explanatory models of illness to the study of youth violence and is conducted within the hermeneutic tradition. Data were collected by interviewing 11 violent adolescents, their parents, and their caregivers. Four types of explanatory models representing the adolescent girls',…

  13. Expertise Reversal Effect in Using Explanatory Notes for Readers of Shakespearean Text

    ERIC Educational Resources Information Center

    Oksa, Annishka; Kalyuga, Slava; Chandler, Paul

    2010-01-01

    The reported study compared the instructional effectiveness of Modern English explanatory interpretations of Shakespearean play extracts integrated line by line into original Elizabethan English text, with a conventional unguided original text condition. Experiment 1 demonstrated that the explanatory notes group reported a lower cognitive load and…

  14. Power of screening tests for colorectal cancer enhanced by high levels of M2-PK in addition to FOBT.

    PubMed

    Zaccaro, Cristina; Saracino, Ilaria Maria; Fiorini, Giulia; Figura, Natale; Holton, John; Castelli, Valentina; Pesci, Valeria; Gatta, Luigi; Vaira, Dino

    2017-02-02

    Colorectal cancer (CRC) is a multistep process that involves adenoma-carcinoma sequence. CRC can be prevented by routine screening, which can detect precancerous lesions. The aim of this study is to clarify whether faecal occult blood test (i-FOBT), tumor M2 pyruvate kinase (t-M2-PK), and endocannabinoid system molecules (cannabinoid receptors type 1-CB1, type 2-CB2, and fatty acid amide hydrolase-FAAH) might represent better diagnostic tools, alone or in combination, for an early diagnosis of CRC. An immunochemical FOB test (i-FOBT) and quantitative ELISA stool test for t-M2-PK were performed in 127 consecutive patients during a 12 month period. Endocannabinoid system molecules and t-M2-PK expression were detected by immunostaining in healthy tissues and normal mucosa surrounding adenomatous and cancerous colon lesions. i-FOBT and t-M2-PK combination leads to a better diagnostic accuracy for pre-neoplastic and neoplastic colon lesions. T-M2-PK quantification in stool samples and in biopsy samples (immunostaining) correlates with tumourigenesis stages. CB1 and CB2 are well expressed in healthy tissues, and their expression decreases in the presence of advanced stages of carcinogenesis and disappears in CRC. FAAH signal is well expressed in normal mucosa and low-risk adenoma, and increased in high-risk adenoma and carcinoma adjacent tissues. This study shows that high levels of t-M2-PK in addition to FOBT enhance the power of a CRC screening test. Endocannabinoid system molecule expression correlates with colon carcinogenesis stages. Developing future faecal tests for their quantification must be undertaken to obtain a more accurate early non-invasive diagnosis for CRC.

  15. How Iranian Women Conceptualize Mental Health: An Explanatory Model

    PubMed Central

    MIRABZADEH, Arash; FOROUZAN, Ameneh Setareh; MOHAMMADI, Farahnaz; DEJMAN, Masoumeh; BARADARAN EFTEKHARI, Monir

    2014-01-01

    Abstract Background In Iran, more than 25% of women suffer from mental disorders. Mental disorders and subclinical problems are associated with socioeconomic problem. At the community level, mental health promotion can reduce social damage. The aim of this study as a part of community based mental health promotion intervention was to explore how mental health in Iranian women is viewed. Methods According to a qualitative method in 2012, participants were selected by purposeful sampling from married women 18 to 65 years who are residents in Tehran. Fifteen in depth individual interviews were conducted with regard to the concept of mental health, causal pathway and help-seeking behavior according to explanatory model. Results Mental health was perceived as the same of emotional well-being. It conceptualized not only lack of mental disorder but also sense of satisfaction and healthy functioning. According to participant's view, the causal pathway of mental health problems were classified to individual, familial and social factors. Physical and behavioral problems were related to individual factor, Lack of marital adjustment was one of the most important issues in familial item and in social factor, cultural context and socio-economic problems were extracted. In help seeking process, all of the participants believed that the religion has important effect in mental health. Conclusion Marital adjustment is an important stage in process of mental health in women. PMID:25988094

  16. The explanatory value of the idea of reincarnation.

    PubMed

    Stevenson, I

    1977-05-01

    The idea of reincarnation is presented as having considerable explanatory value for several features of human personality and biology that currently accepted theories do not adequately clarify. Reincarnation is not offered as a substitute for present knowledge derived from genetics and understanding of environmental influences; it may, however, usefully supplement such knowledge. The present paper does not present evidence from cases suggestive of reincarnation. It does, however, cite cases of subjects who have claimed to remember previous lives, most of whose statements have been verified in the course of detailed investigations. For each case, a reference is provided to a detailed published case report furnishing the evidence in that case. The idea of reincarnation may contribute to an improved understanding of such diverse matters as: phobias and philias of childhood; skills not learned in early life; abnormalities of child-parent relationships; vendettas and bellicose nationalism; childhood sexuality and gender identity confusion; birthmarks, congenital deformities, and internal diseases; differences between members of monozygotic twin pairs; and abnormal appetites during pregnancy. Empirical studies of cases of the reincarnation type have so far not provided any evidence that justifies using reincarnation as an explanation for the occurrence of child prodigies of the large inequities in socioeconomic conditions of humans at birth.

  17. Examining the Value of a Scaffolded Critique Framework to Promote Argumentative and Explanatory Writings Within an Argument-Based Inquiry Approach

    NASA Astrophysics Data System (ADS)

    Jang, Jeong-yoon; Hand, Brian

    2016-12-01

    This study investigated the value of using a scaffolded critique framework to promote two different types of writing—argumentative writing and explanatory writing—with different purposes within an argument-based inquiry approach known as the Science Writing Heuristic (SWH) approach. A quasi-experimental design with sixth and seventh grade students taught by two teachers was used. A total of 170 students participated in the study, with 87 in the control group (four classes) and 83 in the treatment group (four classes). All students used the SWH templates as an argumentative writing to guide their written work and completed these templates during the SWH investigations of each unit. After completing the SWH investigations, both groups of students were asked to complete the summary writing task as an explanatory writing at the end of each unit. All students' writing samples were scored using analytical frameworks developed for the study. The results indicated that the treatment group performed significantly better on the explanatory writing task than the control group. In addition, the results of the partial correlation suggested that there is a very strong significantly positive relationship between the argumentative writing and the explanatory writing.

  18. Explaining Participation: An Explanatory History of Select Gender Patterns in Undergraduate STEM

    NASA Astrophysics Data System (ADS)

    Mastroianni, Michael Pasquale

    This explanatory study examines three focal periods in undergraduate STEM as related to the gender gap. Social, economic, and more general historical data are used to develop a clear and powerful explanation of baccalaureate trends in biology and engineering. Specifically, historical accounts are offered for 1) a ten-year period in undergraduate biology in which the number of baccalaureates awarded to men decreased 44 percent, while the number of baccalaureates awarded to women decreased one percent; 2) the start of a twenty-year period in which the number of bachelor's degrees awarded in the biological sciences increased 150 percent---from 36,068 degrees in 1989, to 90,003 bachelor's degrees in 2011; and 3) a ten year period in undergraduate engineering where female graduation rates septupled---this ten-year time period is the only instance of meaningful and noteworthy growth for women in undergraduate engineering over the past half century. Findings from each history reveal a common narrative underlying baccalaureate trends. Implications for undergraduate STEM are discussed.

  19. Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres

    SciTech Connect

    Rios, Orlando; Radhakrishnan, Balasubramaniam; Caravias, George; Holcomb, Matthew

    2015-03-11

    Grid Logic Inc. is developing a method for sintering and melting fine metallic powders for additive manufacturing using spatially-compact, high-frequency magnetic fields called Micro-Induction Sintering (MIS). One of the challenges in advancing MIS technology for additive manufacturing is in understanding the power transfer to the particles in a powder bed. This knowledge is important to achieving efficient power transfer, control, and selective particle heating during the MIS process needed for commercialization of the technology. The project s work provided a rigorous physics-based model for induction heating of fine spherical particles as a function of frequency and particle size. This simulation improved upon Grid Logic s earlier models and provides guidance that will make the MIS technology more effective. The project model will be incorporated into Grid Logic s power control circuit of the MIS 3D printer product and its diagnostics technology to optimize the sintering process for part quality and energy efficiency.

  20. In Search of Explanatory Frameworks: An Analysis of Richard Feynman's Lecture "Atoms in Motion."

    ERIC Educational Resources Information Center

    Treagust, David F.; Harrison, Allan G.

    2000-01-01

    Discusses the various aspects of explanations that make up an explanatory framework and the notion of pedagogical content knowledge. Analyzes an exemplary set of physics explanations to identify the individual and holistic characteristics of an effective explanation. (Author/SAH)

  1. Attachment Security Balances Perspectives: Effects of Security Priming on Highly Optimistic and Pessimistic Explanatory Styles.

    PubMed

    Deng, Yanhe; Yan, Mengge; Chen, Henry; Sun, Xin; Zhang, Peng; Zeng, Xianglong; Liu, Xiangping; Lye, Yue

    2016-01-01

    Highly optimistic explanatory style (HOES) and highly pessimistic explanatory style (HPES) are two maladaptive ways to explain the world and may have roots in attachment insecurity. The current study aims to explore the effects of security priming - activating supportive representations of attachment security - on ameliorating these maladaptive explanatory styles. 57 participants with HOES and 57 participants with HPES were randomized into security priming and control conditions. Their scores of overall optimistic attribution were measured before and after priming. Security priming had a moderating effect: the security primed HOES group exhibited lower optimistic attribution, while the security primed HPES group evinced higher scores of optimistic attribution. Furthermore, the security primed HOES group attributed positive outcomes more externally, while the security primed HPES group attributed successful results more internally. The results support the application of security priming interventions on maladaptive explanatory styles. Its potential mechanism and directions for future study are also discussed.

  2. Attachment Security Balances Perspectives: Effects of Security Priming on Highly Optimistic and Pessimistic Explanatory Styles

    PubMed Central

    Deng, Yanhe; Yan, Mengge; Chen, Henry; Sun, Xin; Zhang, Peng; Zeng, Xianglong; Liu, Xiangping; Lye, Yue

    2016-01-01

    Highly optimistic explanatory style (HOES) and highly pessimistic explanatory style (HPES) are two maladaptive ways to explain the world and may have roots in attachment insecurity. The current study aims to explore the effects of security priming – activating supportive representations of attachment security – on ameliorating these maladaptive explanatory styles. 57 participants with HOES and 57 participants with HPES were randomized into security priming and control conditions. Their scores of overall optimistic attribution were measured before and after priming. Security priming had a moderating effect: the security primed HOES group exhibited lower optimistic attribution, while the security primed HPES group evinced higher scores of optimistic attribution. Furthermore, the security primed HOES group attributed positive outcomes more externally, while the security primed HPES group attributed successful results more internally. The results support the application of security priming interventions on maladaptive explanatory styles. Its potential mechanism and directions for future study are also discussed. PMID:27610092

  3. The misunderstood limits of folk science: an illusion of explanatory depth

    PubMed Central

    Rozenblit, Leonid; Keil, Frank

    2011-01-01

    People feel they understand complex phenomena with far greater precision, coherence, and depth than they really do; they are subject to an illusion—an illusion of explanatory depth. The illusion is far stronger for explanatory knowledge than many other kinds of knowledge, such as that for facts, procedures or narratives. The illusion for explanatory knowledge is most robust where the environment supports real-time explanations with visible mechanisms. We demonstrate the illusion of depth with explanatory knowledge in Studies 1–6. Then we show differences in overconfidence about knowledge across different knowledge domains in Studies 7–10. Finally, we explore the mechanisms behind the initial confidence and behind overconfidence in Studies 11 and 12. Implications for the roles of intuitive theories in models of concepts and cognition are discussed. PMID:21442007

  4. Optimization of Acetylene Black Conductive Additive andPolyvinylidene Difluoride Composition for High Power RechargeableLithium-Ion Cells

    SciTech Connect

    Liu, G.; Zheng, H.; Battaglia, V.S.; Simens, A.S.; Minor, A.M.; Song, X.

    2007-07-01

    Fundamental electrochemical methods were applied to study the effect of the acetylene black (AB) and the polyvinylidene difluoride (PVDF) polymer binder on the performance of high-power designed rechargeable lithium ion cells. A systematic study of the AB/PVDF long-range electronic conductivity at different weight ratios is performed using four-probe direct current tests and the results reported. There is a wide range of AB/PVDF ratios that satisfy the long-range electronic conductivity requirement of the lithium-ion cathode electrode; however, a significant cell power performance improvement is observed at small AB/PVDF composition ratios that are far from the long-range conductivity optimum of 1 to 1.25. Electrochemical impedance spectroscopy (EIS) tests indicate that the interfacial impedance decreases significantly with increase in binder content. The hybrid power pulse characterization results agree with the EIS tests and also show improvement for cells with a high PVDF content. The AB to PVDF composition plays a significant role in the interfacial resistance. We believe the higher binder contents lead to a more cohesive conductive carbon particle network that results in better overall all local electronic conductivity on the active material surface and hence reduced charge transfer impedance.

  5. Effects of TiO2 and Co2O3 combination additions on the elemental distribution and electromagnetic properties of Mn-Zn power ferrites

    NASA Astrophysics Data System (ADS)

    Yang, W. D.; Wang, Y. G.

    2015-06-01

    The effects of TiO2 and Co2O3 combination additions on the elemental distribution and electromagnetic properties of Mn-Zn power ferrites are investigated. TiO2 addition can promote Co2O3 transfer from grain boundaries to the bulk of the grains. The temperature at which the highest initial permeability μi and the lowest power losses PL appear shifts to low temperature range with the increase of Co2O3 content. Compared with the reference sample without TiO2 and Co2O3 addition, the microstructure and electromagnetic properties of Mn-Zn power ferrites can be considerably improved with suitable amounts of TiO2 and Co2O3 combination additions. At the peak temperature, the sample with the 0.1 wt% TiO2 and 0.08 wt% Co2O3 additions has an increase of 15.8% in μi to 3951, and a decrease of 22.9% in PL to 286 kW/m3. The saturation magnetic induction Bs and electrical resistivity ρ at 25 °C reach the highest values of 532 mT and 8.12 Ω m, respectively.

  6. Unpredicted ovulations and conceptions during early pregnancy: an explanatory mechanism of human superfetation.

    PubMed

    Tarín, Juan J; García-Pérez, Miguel A; Hermenegildo, Carlos; Cano, Antonio

    2013-01-01

    In this bioessay, a literature review on human superfetation was performed in order to find epidemiological variables associated with this phenomenon. Thereafter, an explanatory mechanism of superfetation compatible with the endocrinological, histological and physiological changes undergone by women during early pregnancy is proposed. Superfetation can be defined as the ovulation, fertilisation and implantation of a second or additional embryo(s) during pregnancy. The literature review evidences a small discordance in gestational age between dizygotic twins in humans (range: 2-4 weeks; mean ± s.e.m.: 3.3 ± 0.3 weeks). This difference is compatible with a luteal out-of-phase (LOOP; i.e. atypical increase in E2 levels in the mid-luteal phase)-like event occurring between 1 and 3 weeks after the ovulation that allowed the first pregnancy to take place. The LOOP-like event may allow passive sperm transport from the vaginal fornix to the Fallopian tube ipsilateral to the ovulatory ovary and trigger a LH peak and ovulation. Furthermore, during very early pregnancy, the decidual reaction is not yet completed and at least one proximal Fallopian ostium may be opened, allowing the passage of the spermatozoa ascending to the fertilisation site and the extra embryo(s) descending to the implantation site(s).

  7. First-order electroweak phase transition powered by additional F-term loop effects in an extended supersymmetric Higgs sector

    NASA Astrophysics Data System (ADS)

    Kanemura, Shinya; Senaha, Eibun; Shindou, Tetsuo

    2011-11-01

    We investigate the one-loop effect of new charged scalar bosons on the Higgs potential at finite temperatures in the supersymmetric standard model with four Higgs doublet chiral superfields as well as a pair of charged singlet chiral superfields. In this model, the mass of the lightest Higgs boson h is determined only by the D-term in the Higgs potential at the tree-level, while the triple Higgs boson coupling for hhh can receive a significant radiative correction due to nondecoupling one-loop contributions of the additional charged scalar bosons. We find that the same nondecoupling mechanism can also contribute to realize stronger first order electroweak phase transition than that in the minimal supersymmetric standard model, which is definitely required for a successful scenario of electroweak baryogenesis. Therefore, this model can be a new candidate for a model in which the baryon asymmetry of the Universe is explained at the electroweak scale.

  8. Explanatory Models and Medication Adherence in Patients with Depression in South India

    PubMed Central

    Siddappa, Adarsh Lakkur; Raman, Rajesh; Hattur, Basavana Gowdappa

    2017-01-01

    Introduction Conceptualization of depression may have bearing on treatment seeking. It may affect adherence behaviour of the patients. Aim To find out the explanatory models and their relationship with socio-demographic variables and medication adherence in patients with depression. Materials and Methods Fifty-eight consecutive patients with depression in remission were recruited as per selection criteria. Socio-demographic details were collected. Patients were assessed using Mental Distress Explanatory Model Questionnaire (MDEMQ) and Morisky Medication Adherence Scale (MMAS). Results Significant scores were observed in all dimensions of explanatory models. In the Mann-Whitney U test the patient’s marital status (MU=113.500, p=0.05, sig≤0.05, 2-tailed), and family history of mental illness (MU=165.5, p=0.03, sig≤0.05, 2-tailed) had a statistically significant group difference in the score of MDEMQ. In linear regression analysis, four predictors (MDEMQ subscales Stress, Western physiology, Non-Western physiology and Supernatural) had significantly predicted the value of MMAS (R2=0.937, f=153.558, p<0.001). Conclusion Findings of this study suggested that patients with depression harbor multidimensional explanatory model. The levels of explanatory models are inversely associated with levels of medication adherence. PMID:28274025

  9. Joint perceptual decision-making: a case study in explanatory pluralism

    PubMed Central

    Abney, Drew H.; Dale, Rick; Yoshimi, Jeff; Kello, Chris T.; Tylén, Kristian; Fusaroli, Riccardo

    2014-01-01

    Traditionally different approaches to the study of cognition have been viewed as competing explanatory frameworks. An alternative view, explanatory pluralism, regards different approaches to the study of cognition as complementary ways of studying the same phenomenon, at specific temporal and spatial scales, using appropriate methodological tools. Explanatory pluralism has been often described abstractly, but has rarely been applied to concrete cases. We present a case study of explanatory pluralism. We discuss three separate ways of studying the same phenomenon: a perceptual decision-making task (Bahrami et al., 2010), where pairs of subjects share information to jointly individuate an oddball stimulus among a set of distractors. Each approach analyzed the same corpus but targeted different units of analysis at different levels of description: decision-making at the behavioral level, confidence sharing at the linguistic level, and acoustic energy at the physical level. We discuss the utility of explanatory pluralism for describing this complex, multiscale phenomenon, show ways in which this case study sheds new light on the concept of pluralism, and highlight good practices to critically assess and complement approaches. PMID:24795679

  10. Over-Reporting in Handwashing Self-Reports: Potential Explanatory Factors and Alternative Measurements

    PubMed Central

    Contzen, Nadja; De Pasquale, Sandra; Mosler, Hans-Joachim

    2015-01-01

    Handwashing interventions are a priority in development and emergency aid programs. Evaluation of these interventions is essential to assess the effectiveness of programs; however, measuring handwashing is quite difficult. Although observations are considered valid, they are time-consuming and cost-ineffective; self-reports are highly efficient but considered invalid because desirable behaviour tends to be over-reported. Socially desirable responding has been claimed to be the main cause of inflated self-reports, but its underlying factors and mechanisms are understudied. The present study investigated socially desirable responding and additional potential explanatory factors for over-reported handwashing to identify indications for measures which mitigate over-reporting. Additionally, a script-based covert recall, an alternative interview question intended to mitigate recall errors and socially desirable responding, was developed and tested. Cross-sectional data collection was conducted in the Borena Zone, Ethiopia, through 2.5-hour observations and 1-hour interviews with the primary caregivers in households. A total sample of N = 554 was surveyed. Data were analysed with correlation and multiple regression analyses and dependent t-tests. Over-reporting of handwashing was associated with factors assumed to be involved in (1) socially desirable responding, (2) encoding and recall of information, and (3) dissonance processes. The latter two factor groups explained over-reported handwashing beyond socially desirable responding. The alternative interview question—script-based covert recall—reduced over-reporting compared to conventional self-reports. Although the difficulties involved in measuring handwashing by self-reports and observations are widely known, the present study is the first to investigate the factors which explain over-reporting of handwashing. This research contributes to the limited evidence base on a highly important subject: how to evaluate

  11. Assessment of the Annual Additional Effective Doses amongst Minamisoma Children during the Second Year after the Fukushima Daiichi Nuclear Power Plant Disaster.

    PubMed

    Tsubokura, Masaharu; Kato, Shigeaki; Morita, Tomohiro; Nomura, Shuhei; Kami, Masahiro; Sakaihara, Kikugoro; Hanai, Tatsuo; Oikawa, Tomoyoshi; Kanazawa, Yukio

    2015-01-01

    An assessment of the external and internal radiation exposure levels, which includes calculation of effective doses from chronic radiation exposure and assessment of long-term radiation-related health risks, has become mandatory for residents living near the nuclear power plant in Fukushima, Japan. Data for all primary and secondary children in Minamisoma who participated in both external and internal screening programs were employed to assess the annual additional effective dose acquired due to the Fukushima Daiichi nuclear power plant disaster. In total, 881 children took part in both internal and external radiation exposure screening programs between 1st April 2012 to 31st March 2013. The level of additional effective doses ranged from 0.025 to 3.49 mSv/year with the median of 0.70 mSv/year. While 99.7% of the children (n = 878) were not detected with internal contamination, 90.3% of the additional effective doses was the result of external radiation exposure. This finding is relatively consistent with the doses estimated by the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR). The present study showed that the level of annual additional effective doses among children in Minamisoma has been low, even after the inter-individual differences were taken into account. The dose from internal radiation exposure was negligible presumably due to the success of contaminated food control.

  12. Assessment of the Annual Additional Effective Doses amongst Minamisoma Children during the Second Year after the Fukushima Daiichi Nuclear Power Plant Disaster

    PubMed Central

    Tsubokura, Masaharu; Kato, Shigeaki; Morita, Tomohiro; Nomura, Shuhei; Kami, Masahiro; Sakaihara, Kikugoro; Hanai, Tatsuo; Oikawa, Tomoyoshi; Kanazawa, Yukio

    2015-01-01

    An assessment of the external and internal radiation exposure levels, which includes calculation of effective doses from chronic radiation exposure and assessment of long-term radiation-related health risks, has become mandatory for residents living near the nuclear power plant in Fukushima, Japan. Data for all primary and secondary children in Minamisoma who participated in both external and internal screening programs were employed to assess the annual additional effective dose acquired due to the Fukushima Daiichi nuclear power plant disaster. In total, 881 children took part in both internal and external radiation exposure screening programs between 1st April 2012 to 31st March 2013. The level of additional effective doses ranged from 0.025 to 3.49 mSv/year with the median of 0.70 mSv/year. While 99.7% of the children (n = 878) were not detected with internal contamination, 90.3% of the additional effective doses was the result of external radiation exposure. This finding is relatively consistent with the doses estimated by the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR). The present study showed that the level of annual additional effective doses among children in Minamisoma has been low, even after the inter-individual differences were taken into account. The dose from internal radiation exposure was negligible presumably due to the success of contaminated food control. PMID:26053271

  13. Consumer-operated service program members' explanatory models of mental illness and recovery.

    PubMed

    Hoy, Janet M

    2014-10-01

    Incorporating individuals' understandings and explanations of mental illness into service delivery offers benefits relating to increased service relevance and meaning. Existing research delineates explanatory models of mental illness held by individuals in home, outpatient, and hospital-based contexts; research on models held by those in peer-support contexts is notably absent. In this article, I describe themes identified within and across explanatory models of mental illness and recovery held by mental health consumers (N = 24) at one peer center, referred to as a consumer-operated service center (COSP). Participants held explanatory models inclusive of both developmental stressors and biomedical causes, consistent with a stress-diathesis model (although no participant explicitly referenced such). Explicit incorporation of stress-diathesis constructs into programming at this COSP offers the potential of increasing service meaning and relevance. Identifying and incorporating shared meanings across individuals' understandings of mental illness likewise can increase relevance and meaning for particular subgroups of service users.

  14. Predicting conditional means of explanatory variables for energy-demand forecasting

    SciTech Connect

    Parti, M.; Parti, C.B.; Gould, D.M.; Parris, K.M.

    1984-11-01

    The purpose of the research was to explore the feasibility of an economic and statistical approach to the problem of forecasting the conditional means of variables used to predict appliance-specific energy demand. The technique recognizes the necessity of using conditional means of explanatory variables, and it takes into account the changing distributions of these variables over time. Statistical relationships are used to derive the probability distribution of the explanatory variables, given ownership of an appliance such as a pool heater. The conditional means of the explanatory variables can then be calculated on the basis of this conditional probability distribution. The present research has found sizable differences in forecasts of appliance-specific energy demand generated from the conditional means approach and the non-specific approach.

  15. Do Primary School Science Books for Children Show a Concern for Explanatory Understanding?

    NASA Astrophysics Data System (ADS)

    Newton, L. D.; Newton, D. P.; Blake, A.; Brown, K.

    2002-02-01

    Explanatory understanding is a valued goal in science education and yet research evidence suggests that, for a variety of reasons, it is not always a major concern of primary science teachers. Do primary science books show a concern for explanatory understanding? Using a structured analysis schedule, this study explored the extent to which 76 current primary science textbooks, intended for use with older primary children (7-11 years), showed a concern for explanatory understanding. The results indicated that the majority of the books did not reflect such a concern. Nevertheless, some books did include causal and intentional explanations. These could be a useful resource in that they could help shape both teachers' and children's conceptions of what counts as understanding in science.

  16. Impact of high microwave power on hydrogen impurity trapping in nanocrystalline diamond films grown with simultaneous nitrogen and oxygen addition into methane/hydrogen plasma

    NASA Astrophysics Data System (ADS)

    Tang, C. J.; Fernandes, A. J. S.; Jiang, X. F.; Pinto, J. L.; Ye, H.

    2016-01-01

    In this work, we study for the first time the influence of microwave power higher than 2.0 kW on bonded hydrogen impurity incorporation (form and content) in nanocrystalline diamond (NCD) films grown in a 5 kW MPCVD reactor. The NCD samples of different thickness ranging from 25 to 205 μm were obtained through a small amount of simultaneous nitrogen and oxygen addition into conventional about 4% methane in hydrogen reactants by keeping the other operating parameters in the same range as that typically used for the growth of large-grained polycrystalline diamond films. Specific hydrogen point defect in the NCD films is analyzed by using Fourier-transform infrared (FTIR) spectroscopy. When the other operating parameters are kept constant (mainly the input gases), with increasing of microwave power from 2.0 to 3.2 kW (the pressure was increased slightly in order to stabilize the plasma ball of the same size), which simultaneously resulting in the rise of substrate temperature more than 100 °C, the growth rate of the NCD films increases one order of magnitude from 0.3 to 3.0 μm/h, while the content of hydrogen impurity trapped in the NCD films during the growth process decreases with power. It has also been found that a new H related infrared absorption peak appears at 2834 cm-1 in the NCD films grown with a small amount of nitrogen and oxygen addition at power higher than 2.0 kW and increases with power higher than 3.0 kW. According to these new experimental results, the role of high microwave power on diamond growth and hydrogen impurity incorporation is discussed based on the standard growth mechanism of CVD diamonds using CH4/H2 gas mixtures. Our current experimental findings shed light into the incorporation mechanism of hydrogen impurity in NCD films grown with a small amount of nitrogen and oxygen addition into methane/hydrogen plasma.

  17. Explanatory models of obesity of inner-city African-American adolescent males.

    PubMed

    Ashcraft, Pamela F

    2013-01-01

    The purpose of this phenomenological inquiry was to construct an explanatory model of illness in inner-city African-American adolescent males using Kleinman's Explanatory Model of Illness as a framework. Thirteen males were enrolled in this study. In-depth, semi-structured interviews were used to explore adolescents' perspectives regarding the nature, cause, prevention and responses to obesity; their perception of self; and meanings they attach to obesity with particular emphasis on existing attitudes, expectations, and values. Data analysis was achieved through a process of inductive content analysis. Findings, future research and clinical implications are discussed.

  18. A High Explanatory Power Model of Foot and Mouth Disease Spread in Central California

    DTIC Science & Technology

    2013-03-01

    spongiform encephalopathy and Foot and mouth disease in Great Britain. A dissertation presented in partial fulfillment of the requirements for the degree...Kong, Hong Kong retrieved from www.pnas.org/cgi/doi/10.1073/pnas.0913286107 Stevenson, M. (2003). The Spatio-temporal epidemiology of Bovine

  19. The Mexican Health Paradox: Expanding the Explanatory Power of the Acculturation Construct

    ERIC Educational Resources Information Center

    Horevitz, Elizabeth; Organista, Kurt C.

    2013-01-01

    The Mexican health paradox refers to initially favorable health and mental health outcomes among recent Mexican immigrants to the United States. The subsequent rapid decline in Mexican health outcomes has been attributed to the process of acculturation to U.S. culture. However, the construct of acculturation has come under significant criticism…

  20. Producing Cosmos? The Explanatory Power of Social Drama for School Reform

    ERIC Educational Resources Information Center

    Forsey, Martin

    2006-01-01

    The winds of decentralizing reform that have been driving their way through various government education systems across the globe over the best part of two decades have generated a great deal of conflict. In the late 1990s those working in the Western Australian government high school in which I conducted the research reported here found…

  1. Quantitative geophysics in permafrost rock walls and their explanatory power for geomechanics

    NASA Astrophysics Data System (ADS)

    Krautblatter, M.; Dräbing, D.; Funk, D.; Kemna, A.

    2012-12-01

    An increasing number of rock falls has been reported for permafrost-affected rockwalls in the last two decades. The anticipation of the hazard induced by permafrost rock slope failure requires monitoring of thermal and hydrological regimes and geomechanical properties inside the rock mass and quantitative geophysics could provide certain information on all of them. Electrical resistivity tomography (ERT) in frozen rock walls could become a key method for such investigations since freezing and sub-freezing temperature changes induce significant and recognizable changes in resistivity. Testing temperature-resistivity T-ρ relationships from a double-digit number of low-porosity sedimentary, metamorphic and igneous rocks from Alpine and Arctic permafrost rockwalls in the laboratory, we found evidence that exponential T-ρ paths developed by McGinnis et al. (1973) do not describe the resistivity behaviour of hard rocks undergoing freezing or melting correctly, as freezing occurs in confined space. We provide evidence that bilinear functions of unfrozen and frozen T-ρ paths offer a better approximation. Inferring reliable thermal state variables from ERT images requires a quantitative approach involving calibrated (T-ρ) relationships and an adequate resistance error description in the ERT inversion process, where the correct description of data errors and the right degree of data fitting are crucial issues. We also provide evidence that seismic refraction tomography is technically feasible to detect permafrost in low-porosity bedrock that constitutes steep rock walls. We have tested temperature - P-wave velocity functions of 22 decimeter-large metamorphic, magmatic and sedimentary low-porosity rock samples with a natural texture of numerous micro-fissures from alpine and arctic rock walls. The results show the significance of the ice-pressure-induced matrix velocity increase in low-porosity rocks while the velocity increase of the pore infill is negligible. Hence, the applicability of refraction seismics in low-porosity rock walls is confirmed. We present a modified Timur's (1968) time-average equation for low-porosity rocks by implementing (lithologically referenced) matrix velocity changes. We show examples from repeated 2D and 3D measurement campaigns from 2006-2011 in permafrost rock walls at the Zugspitze (Germany), the Aiguille du Midi (France) and the Steintaelli Crestline (Switzerland) to demonstrate the potential of quantitative geophysics in permafrost rocks. Changes in geophysical properties can be directly linked to geomechanical changes in e.g. fracture toughness of intact rock and to changing hydrological regimes. Here we show, how an enhanced geophysical characterisation of permafrost rock walls could contribute to the anticipation of rock instability a changing climate.

  2. Conservation Behavior: A Look at the Explanatory Power of the Traditional Adoption-Diffusion Model.

    ERIC Educational Resources Information Center

    Lovejoy, Stephen B.; Parent, F. Dale

    The study focused on the Environmental Protection Agency's Black Creek Watershed project in Northeastern Indiana in relation to the farmers attitudes toward environmental innovations, as well as their continued use of such innovations 2.5 years after the project's completion. Data were gathered by 89 interviews at the beginning of the project…

  3. High SO{sub 2} removal efficiency testing: Results of DBA and sodium formate additive tests at Southwestern Electric Power company`s Pirkey Station

    SciTech Connect

    1996-05-30

    Tests were conducted at Southwestern Electric Power Company`s (SWEPCo) Henry W. Pirkey Station wet limestone flue gas desulfurization (FGD) system to evaluate options for achieving high sulfur dioxide removal efficiency. The Pirkey FGD system includes four absorber modules, each with dual slurry recirculation loops and with a perforated plate tray in the upper loop. The options tested involved the use of dibasic acid (DBA) or sodium formate as a performance additive. The effectiveness of other potential options was simulated with the Electric Power Research Institute`s (EPRI) FGD PRocess Integration and Simulation Model (FGDPRISM) after it was calibrated to the system. An economic analysis was done to determine the cost effectiveness of the high-efficiency options. Results are-summarized below.

  4. Multivariate explanatory model for sporadic carcinoma of the colon in Dukes' stages I and IIa

    PubMed Central

    Villadiego-Sánchez, J.M.; Ortega-Calvo, M.; Pino-Mejías, R.; Cayuela, A.; Iglesias-Bonilla, P.; la Corte, F. García-de; Santos-Lozano, J.M.; Lapetra-Peralta, José

    2009-01-01

    Objective: We obtained before an explanatory model with six dependant variables: age of the patient, total cholesterol (TC), HDL cholesterol (HDL-C), VLDL cholesterol (VLDL-C), alkaline phosphatase (AP) and the CA 19.9 tumour marker. Our objective in this study was to validate the model by means of the acquisition of new records for an additional analysis. Design: Non-paired case control study. Setting: Urban and rural hospitals and primary health facilities in Western Andalusia and Extremadura (Spain). Patients: At both the primary care facilities and hospital level, controls were gathered in a prospective manner (n= 275). Cases were prospective and retrospective manner collected on (n=126). Main outcome measures: Descriptive statistics, logistic regression and bootstrap analysis. Results: The AGE (odds ratio 1.02; 95% CI 1.003-1.037) (p= 0.01), the TC (odds ratio 0.986; 95% C.I. 0.980-0.992) (p< 0.001) and the CA 19.9 (odds ratio 1.023; 95% C.I. 1.012- 1.034) (p<0.001) were the variables that showed significant values at logistic regression analysis and bootstrap. Berkson's bias was statistically assessed. Conclusions: The model, validated by means of logistic regression and bootstrap analysis, contains the variables AGE, TC, and CA 19.9 (three of the original six) and has a level 4 over 5 according to the criteria of Justice et al. (multiple independent validations) [Ann. Intern. Med.1999; 130: 515]. PMID:19214243

  5. Information Sources as Explanatory Variables for the Belgian Health-Related Risk Perception of the Fukushima Nuclear Accident.

    PubMed

    Vyncke, Bart; Perko, Tanja; Van Gorp, Baldwin

    2016-06-20

    The media play an important role in risk communication, providing information about accidents, both nearby and far away. Each media source has its own presentation style, which could influence how the audience perceives the presented risk. This study investigates the explanatory power of 12 information sources (traditional media, new media, social media, and interpersonal communication) for the perceived risk posed by radiation released from the damaged Fukushima nuclear power plant on respondents' own health and that of the population in general. The analysis controlled for attitude toward nuclear energy, gender, education, satisfaction with the media coverage, and duration of attention paid to the coverage. The study uses a large empirical data set from a public opinion survey, which is representative for the Belgian population with respect to six sociodemographic variables. Results show that three information sources are significant regressors of perceived health-related risk of the nuclear accident: television, interpersonal communication, and the category of miscellaneous online sources. More favorable attitudes toward nuclear power, longer attention to the coverage, and higher satisfaction with the provided information lead to lower risk perception. Taken together, the results suggest that the media can indeed have a modest influence on how the audience perceives a risk.

  6. Explanatory models and mental health treatment: is vodou an obstacle to psychiatric treatment in rural Haiti?

    PubMed

    Khoury, Nayla M; Kaiser, Bonnie N; Keys, Hunter M; Brewster, Aimee-Rika T; Kohrt, Brandon A

    2012-09-01

    Vodou as an explanatory framework for illness has been considered an impediment to biomedical psychiatric treatment in rural Haiti by some scholars and Haitian professionals. According to this perspective, attribution of mental illness to supernatural possession drives individuals to seek care from houngan-s (Vodou priests) and other folk practitioners, rather than physicians, psychologists, or psychiatrists. This study investigates whether explanatory models of mental illness invoking supernatural causation result in care-seeking from folk practitioners and resistance to biomedical treatment. The study comprised 31 semi-structured interviews with community leaders, traditional healers, religious leaders, and biomedical providers, 10 focus group discussions with community members, community health workers, health promoters, community leaders, and church members; and four in-depth case studies of individuals exhibiting mental illness symptoms conducted in Haiti's Central Plateau. Respondents invoked multiple explanatory models for mental illness and expressed willingness to receive treatment from both traditional and biomedical practitioners. Folk practitioners expressed a desire to collaborate with biomedical providers and often referred patients to hospitals. At the same time, respondents perceived the biomedical system as largely ineffective for treating mental health problems. Explanatory models rooted in Vodou ethnopsychology were not primary barriers to pursuing psychiatric treatment. Rather, structural factors including scarcity of treatment resources and lack of psychiatric training among health practitioners created the greatest impediments to biomedical care for mental health concerns in rural Haiti.

  7. Making Sense of a Globalizing World: Adolescents' Explanatory Frameworks for Poverty

    ERIC Educational Resources Information Center

    Myers, John P.

    2008-01-01

    Poverty, like other persistent social problems, has taken on new dimensions and scale due to globalization. This research examined 20 adolescents' explanatory frameworks for global poverty during their participation in an international studies program. International development theories were employed to analyze the range of their responses. The…

  8. Parental Explanatory Models of Child's Intellectual Disability: A Q Methodology Study

    ERIC Educational Resources Information Center

    John, Aesha; Montgomery, Diane

    2016-01-01

    This study with families caring for an individual with an intellectual disability in a mid-sized Indian city explored the diverse explanatory models that parents constructed of causes, preferred treatment approaches and perceived social effects of their child's intellectual disability. Seventeen mothers and three fathers rank ordered 48 disability…

  9. General Education in Health Science-Focused Institutions: An Explanatory Mixed Methods Study

    ERIC Educational Resources Information Center

    Rosario, Peggy

    2012-01-01

    The purpose of this study was to describe the structure of general education curricula at baccalaureate colleges of health science in relationship to Bergquist's Career-Based Model of curriculum. Using an explanatory sequential mixed methods approach, the model was tested by examining whether the curricula were both prescriptive and specific.…

  10. Accentuate the Positive: The Relationship between Positive Explanatory Style and Academic Achievement of Prospective Elementary Teachers

    ERIC Educational Resources Information Center

    Boyer, Wanda

    2006-01-01

    This research examines 480 current event-explanation units using the CAVE technique (Schulman, Castellon, & Seligman, 1989) to note the relationship between positive and negative explanatory style and achievement of prospective early childhood and upper elementary female teachers. This study found a significant positive relationship between…

  11. Explanatory and Persuasive Letter Writing: Selected Results from the Second National Assessment of Writing.

    ERIC Educational Resources Information Center

    Education Commission of the States, Denver, CO. National Assessment of Educational Progress.

    The National Assessment of Educational Progress (NAEP) is an information-gathering project that surveys the educational attainments of 9 year olds, 13 year olds, 17 year olds, and adults (ages 26 to 35) in ten learning areas, one of which is writing. This report focuses on persuasive and explanatory letter writing, representing two basic aims of…

  12. Multivariate Graphical Methods Provide an Insightful Way to Formulate Explanatory Hypotheses from Limited Categorical Data

    PubMed Central

    Van Ness, Peter H.; Murphy, Terrence E.; Araujo, Katy L.B.; Pisani, Margaret A.

    2011-01-01

    Objective Graphical methods for generating explanatory hypotheses from limited categorical data are described and illustrated. Study Design and Setting Univariate, bivariate, multivariate, and multiplicative graphical methods were applied to clinical data regarding very ill older persons. The data to which these methods were applied were limited as to their nature (e.g., nominal categorical data) or quality (e.g., data subject to measurement error and missing values). Such limitations make confirmatory inference problematic but might still allow for meaningful generation of new explanatory hypotheses in some cases. Results A striking feature of the graphical results from this study’s major illustrative application was that Post-Traumatic Stress Disorder (PTSD) following Intensive Care Unit (ICU) discharge occurred rarely and nearly always co-occurred with two or more other mental health conditions. These results suggest the explanatory hypothesis that PTSD in this context is less attributable to single traumatic causes than to acute illnesses contributing to a cascade of mental health decrements. Conclusion Illustrative applications of a sequence of graphical procedures yield more informative and less abstract representations of limited data than do descriptive statistics alone, and by doing so, they aid in the formulation of explanatory hypotheses. PMID:21889310

  13. The Explanatory and Predictive Relationship Pattern between University Students' Goal Orientation Behaviours and Their Academic Achievement

    ERIC Educational Resources Information Center

    Akpur, Ugur

    2016-01-01

    The purpose of this study is to determine the explanatory and predictive relationship pattern between university students' goal orientation behaviours and their academic achievement. The study group consisted of 259 university students. A "2x2 Achievement Goal Orientations Scale" was used to determine the students' goal orientation…

  14. Explanatory Models of Illness: A Study of Within-Culture Variation

    ERIC Educational Resources Information Center

    Lynch, Elizabeth; Medin, Douglas

    2006-01-01

    The current studies explore causal models of heart attack and depression generated from American healers whom use distinct explanatory frameworks. Causal chains leading to two illnesses, heart attack and depression, were elicited from participant groups: registered nurses (RNs), energy healers, RN energy healers, and undergraduates. The…

  15. Technology Adoption in Secondary Mathematics Teaching in Kenya: An Explanatory Mixed Methods Study

    ERIC Educational Resources Information Center

    Kamau, Leonard Mwathi

    2014-01-01

    This study examined the factors related to technology adoption by secondary mathematics teachers in Nyandarua and Nairobi counties in the Republic of Kenya. Using a sequential explanatory mixed methods approach, I collected qualitative data from interviews and classroom observations of six teachers to better understand statistical results from the…

  16. Explanatory and pragmatic clinical trials: a primer and application to a recent asthma trial.

    PubMed

    Sackett, David L

    2011-01-01

    Most clinical trials assessing the role of a specific intervention attempt to answer an explanatory question: under ideal circumstances of risk and responsiveness, can the expert care of individual with a particular condition reduce their risks of a relevant but restricted set of outcomes? Such explanatory trials (also called efficacy trials) are of direct relevance to expert clinicians and their highly compliant patients. Another question, potentially of broader clinical or health care policy relevance is: Does this treatment improve patient-important outcomes when applied by typical clinicians to typical patients? Answering this latter question is the goal of pragmatic trial, also labeled by some as "management" or "effectiveness" trial. The methodological and organizational differences between explanatory and pragmatic trials include, among others, patients eligibility (restricted to highly responsive and compliant patients in explanatory trials vs. everyone with condition of interest in pragmatic trials), experimental and comparator intervention (blinded and inflexible with strict instructions vs. flexible with cross-over permitted and no blinding), types of practitioners (only those with documented high expertise vs. all who usually provide given mode of care), and outcome measurement (often limited to biologic effects vs. broad overall health effects sometimes based on administrative data bases on mortality and utilization). Those aspects of study design and conduct and their role in determining a place of an intervention in clinical practice are reviewed in this paper.

  17. Why Do Adolescents Use Drugs? A Common Sense Explanatory Model from the Social Actor's Perspective

    ERIC Educational Resources Information Center

    Nuno-Gutierrez, Bertha Lidia; Rodriguez-Cerda, Oscar; Alvarez-Nemegyei, Jose

    2006-01-01

    Analysis was made of the common sense explanations of 60 Mexican teenage illicit drug users in rehabilitation to determine their drug use debut. The explanatory model was separated into three blocks, two of which contained common sense aspects: interaction between subject's plane and the collectivity; and relationship between subject's interior…

  18. Parents' and Speech and Language Therapists' Explanatory Models of Language Development, Language Delay and Intervention

    ERIC Educational Resources Information Center

    Marshall, Julie; Goldbart, Juliet; Phillips, Julie

    2007-01-01

    Background: Parental and speech and language therapist (SLT) explanatory models may affect engagement with speech and language therapy, but there has been dearth of research in this area. This study investigated parents' and SLTs' views about language development, delay and intervention in pre-school children with language delay. Aims: The aims…

  19. Socioeconomic Inequalities in Mortality and Repeated Measurement of Explanatory Risk Factors in a 25 Years Follow-Up

    PubMed Central

    Skalická, Věra; Ringdal, Kristen; Witvliet, Margot I.

    2015-01-01

    Background Socioeconomic inequalities in mortality can be explained by different groups of risk factors. However, little is known whether repeated measurement of risk factors can provide better explanation of socioeconomic inequalities in health. Our study examines the extent to which relative educational and income inequalities in mortality might be explained by explanatory risk factors (behavioral, psychosocial, biomedical risk factors and employment) measured at two points in time, as compared to one measurement at baseline. Methods and Findings From the Norwegian total county population-based HUNT Study (years 1984–86 and 1995–1997, respectively) 61 513 men and women aged 25–80 (82.5% of all enrolled) were followed-up for mortality in 25 years until 2009, employing a discrete time survival analysis. Socioeconomic inequalities in mortality were observed. As compared to their highest socioeconomic counterparts, the lowest educated men had an OR (odds ratio) of 1.41 (95% CI 1.29–1.55) and for the lowest income quartile OR = 1.59 (1.48–1.571), for women OR = 1.35 (1.17–1.55), and OR = 1.40 (1.28–1.52), respectively. Baseline explanatory variables attenuated the association between education and income with mortality by 54% and 54% in men, respectively, and by 69% and 18% in women. After entering time-varying variables, this attainment increased to 63% and 59% in men, respectively, and to 25% (income) in women, with no improvement in regard to education in women. Change in biomedical factors and employment did not amend the explanation. Conclusions Addition of a second measurement for risk factors provided only a modest improvement in explaining educational and income inequalities in mortality in Norwegian men and women. Accounting for change in behavior provided the largest improvement in explained inequalities in mortality for both men and women, as compared to measurement at baseline. Psychosocial factors explained the largest share of income

  20. Exploring the post-genomic world: differing explanatory and manipulatory functions of post-genomic sciences.

    PubMed

    Holmes, Christina; Carlson, Siobhan M; McDonald, Fiona; Jones, Mavis; Graham, Janice

    2016-01-02

    Richard Lewontin proposed that the ability of a scientific field to create a narrative for public understanding garners it social relevance. This article applies Lewontin's conceptual framework of the functions of science (manipulatory and explanatory) to compare and explain the current differences in perceived societal relevance of genetics/genomics and proteomics. We provide three examples to illustrate the social relevance and strong cultural narrative of genetics/genomics for which no counterpart exists for proteomics. We argue that the major difference between genetics/genomics and proteomics is that genomics has a strong explanatory function, due to the strong cultural narrative of heredity. Based on qualitative interviews and observations of proteomics conferences, we suggest that the nature of proteins, lack of public understanding, and theoretical complexity exacerbates this difference for proteomics. Lewontin's framework suggests that social scientists may find that omics sciences affect social relations in different ways than past analyses of genetics.

  1. Using explanatory crop models to develop simple tools for Advanced Life Support system studies

    NASA Technical Reports Server (NTRS)

    Cavazzoni, J.

    2004-01-01

    System-level analyses for Advanced Life Support require mathematical models for various processes, such as for biomass production and waste management, which would ideally be integrated into overall system models. Explanatory models (also referred to as mechanistic or process models) would provide the basis for a more robust system model, as these would be based on an understanding of specific processes. However, implementing such models at the system level may not always be practicable because of their complexity. For the area of biomass production, explanatory models were used to generate parameters and multivariable polynomial equations for basic models that are suitable for estimating the direction and magnitude of daily changes in canopy gas-exchange, harvest index, and production scheduling for both nominal and off-nominal growing conditions. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

  2. Towards a computational(ist) neurobiology of language: Correlational, integrated, and explanatory neurolinguistics*

    PubMed Central

    Poeppel, David

    2014-01-01

    We outline what an integrated approach to language research that connects experimental, theoretical, and neurobiological domains of inquiry would look like, and ask to what extent unification is possible across domains. At the center of the program is the idea that computational/representational (CR) theories of language must be used to investigate its neurobiological (NB) foundations. We consider different ways in which CR and NB might be connected. These are (1) A Correlational way, in which NB computation is correlated with the CR theory; (2) An Integrated way, in which NB data provide crucial evidence for choosing among CR theories; and (3) an Explanatory way, in which properties of NB explain why a CR theory is the way it is. We examine various questions concerning the prospects for Explanatory connections in particular, including to what extent it makes sense to say that NB could be specialized for particular computations. PMID:25914888

  3. Exploring the post-genomic world: differing explanatory and manipulatory functions of post-genomic sciences

    PubMed Central

    Holmes, Christina; Carlson, Siobhan M.; McDonald, Fiona; Jones, Mavis; Graham, Janice

    2016-01-01

    Richard Lewontin proposed that the ability of a scientific field to create a narrative for public understanding garners it social relevance. This article applies Lewontin's conceptual framework of the functions of science (manipulatory and explanatory) to compare and explain the current differences in perceived societal relevance of genetics/genomics and proteomics. We provide three examples to illustrate the social relevance and strong cultural narrative of genetics/genomics for which no counterpart exists for proteomics. We argue that the major difference between genetics/genomics and proteomics is that genomics has a strong explanatory function, due to the strong cultural narrative of heredity. Based on qualitative interviews and observations of proteomics conferences, we suggest that the nature of proteins, lack of public understanding, and theoretical complexity exacerbates this difference for proteomics. Lewontin's framework suggests that social scientists may find that omics sciences affect social relations in different ways than past analyses of genetics. PMID:27134568

  4. `Quantum Mechanics' and `Scientific Explanation' An Explanatory Strategy Aiming at Providing `Understanding'

    NASA Astrophysics Data System (ADS)

    Hadzidaki, Pandora

    2008-01-01

    Empirical studies persistently indicate that the usual explanatory strategies used in quantum mechanics (QM) instruction fail, in general, to yield understanding. In this study, we propose an instructional intervention, which: (a) incorporates into its subject matter a critical comparison of QM scientific content with the fundamental epistemological and ontological commitments of the prominent philosophical theories of explanation, a weak form of which we meet in QM teaching; (b) illuminates the reasons of their failure in the quantum domain; and (c) implements an explanatory strategy highly inspired by the epistemological pathways through which, during the birth-process of QM, science has gradually reached understanding. This strategy, an inherent element of which is the meta-cognitive and meta-scientific thinking, aims at leading learners not only to an essential understanding of QM worldview, but to a deep insight into the ‘Nature of Science’ as well.

  5. Toxin or medicine? Explanatory models of radon in Montana health mines.

    PubMed

    Erickson, Barbra E

    2007-03-01

    Environmental protection and public health agencies in the United States and elsewhere label radioactive radon gas a toxic environmental hazard and a major cause of lung cancer. Paradoxically, in Europe and Japan radon gas is also used as an analgesic and anti-inflammatory, as one choice in the spectrum of conventional medical care. Although it is possible to find radon therapy in the United States, it exists only as an unconventional practice in Montana "radon health mines." In this article, I examine the use of radon therapy by Americans despite intensive public health education media campaigns. Using the notion of explanatory models as an analytical framework, I argue that American health mine clients adjust or replace "toxic models" of radon with new kinds of explanatory models that allow radon to be redefined as a healing substance. The manner of this adjustment varies according to peoples' individual needs, their own preexisting cultural models and experiences, and their individual personalities; the source of authoritative knowledge accepted by each person is a strong influence. Through these altered explanatory models, mine clients are able to view their use of radon therapy as a rational course of action.

  6. A case study of alternative site response explanatory variables in Parkfield, California

    USGS Publications Warehouse

    Thompson, E.M.; Baise, L.G.; Kayen, R.E.; Morgan, E.C.; Kaklamanos, J.

    2011-01-01

    The combination of densely-spaced strong-motion stations in Parkfield, California, and spectral analysis of surface waves (SASW) profiles provides an ideal dataset for assessing the accuracy of different site response explanatory variables. We judge accuracy in terms of spatial coverage and correlation with observations. The performance of the alternative models is period-dependent, but generally we observe that: (1) where a profile is available, the square-root-of-impedance method outperforms VS30 (average S-wave velocity to 30 m depth), and (2) where a profile is unavailable, the topographic-slope method outperforms surficial geology. The fundamental site frequency is a valuable site response explanatory variable, though less valuable than VS30. However, given the expense and difficulty of obtaining reliable estimates of VS30 and the relative ease with which the fundamental site frequency can be computed, the fundamental site frequency may prove to be a valuable site response explanatory variable for many applications. ?? 2011 ASCE.

  7. 'Hypotheses, everywhere only hypotheses!': on some contexts of Dilthey's critique of explanatory psychology.

    PubMed

    Feest, Uljana

    2007-03-01

    In 1894, Wilhelm Dilthey published an article in which he formulated a critique of what he called 'explanatory psychology', contrasting it with his own conception of 'descriptive psychology'. Dilthey's descriptive psychology, in turn, was to provide the basis for Dilthey's specific philosophy of the human sciences (Geisteswissenschaften). In this paper, I contextualize Dilthey's critique of explanatory psychology. I show that while this critique comes across as very broad and sweeping, he in fact had specific opponents in mind, namely, scholars who, like him, attempted to theorize about the relationship between the individual and society, between psychology and the other human sciences. Dilthey's critique of explanatory psychology is the flipside of his critique of sociology, which he had already formulated. He challenged both because he felt that they gave the wrong kind of answer to the task of overcoming metaphysics within the human sciences. In particular, I identify the founders of Völkerpsychologie, Moritz Lazarus and Heymann Steinthal, and (more importantly) their student, Georg Simmel, as Dilthey's targets. I provide textual and historical evidence for this thesis.

  8. The International Classification of Functioning as an explanatory model of health after distal radius fracture: A cohort study

    PubMed Central

    Harris, Jocelyn E; MacDermid, Joy C; Roth, James

    2005-01-01

    Background Distal radius fractures are common injuries that have an increasing impact on health across the lifespan. The purpose of this study was to identify health impacts in body structure/function, activity, and participation at baseline and follow-up, to determine whether they support the ICF model of health. Methods This is a prospective cohort study of 790 individuals who were assessed at 1 week, 3 months, and 1 year post injury. The Patient Rated Wrist Evaluation (PRWE), The Wrist Outcome Measure (WOM), and the Medical Outcome Survey Short-Form (SF-36) were used to measure impairment, activity, participation, and health. Multiple regression was used to develop explanatory models of health outcome. Results Regression analysis showed that the PRWE explained between 13% (one week) and 33% (three months) of the SF-36 Physical Component Summary Scores with pain, activities and participation subscales showing dominant effects at different stages of recovery. PRWE scores were less related to Mental Component Summary Scores, 10% (three months) and 8% (one year). Wrist impairment scores were less powerful predictors of health status than the PRWE. Conclusion The ICF is an informative model for examining distal radius fracture. Difficulty in the domains of activity and participation were able to explain a significant portion of physical health. Post-fracture rehabilitation and outcome assessments should extend beyond physical impairment to insure comprehensive treatment to individuals with distal radius fracture. PMID:16288664

  9. Impact of migration on explanatory models of illness and addiction severity in patients with drug dependence in a Paris suburb.

    PubMed

    Taïeb, Olivier; Chevret, Sylvie; Moro, Marie Rose; Weiss, Mitchell G; Biadi-Imhof, Anne; Reyre, Aymeric; Baubet, Thierry

    2012-03-01

    Objectives of this study were to assess explanatory models (considering illness experience and meaning), addiction severity among patients with drug dependence, and the role of migration. Adapted Explanatory Model Interview Catalogue interviews were conducted with 70 outpatients in a Paris suburb. Among them, 42 were either first- or second-generation immigrants, most from North Africa. Explanatory models were analyzed qualitatively and quantitatively according to migration status, assessing potential confounders with multivariate linear models. Explanatory models were heterogeneous. Compared with nonmigrants, migrants reported fewer somatic and violence-related symptoms. They attributed the causes of their addiction more frequently to social and magico-religious factors and less to psychological factors. Conversely, no difference in addiction severity was found between migrants and nonmigrants. Considering local patterns of illness experience and meaning of drug dependence is a critical component of culturally sensitive clinical care.

  10. Are explanatory trials ethical? Shifting the burden of justification in clinical trial design.

    PubMed

    Borgerson, Kirstin

    2013-08-01

    Most phase III clinical trials today are explanatory. Because explanatory, or efficacy, trials test hypotheses under "ideal" conditions, they are not well suited to providing guidance on decisions made in most clinical care contexts. Pragmatic trials, which test hypotheses under "usual" conditions, are often better suited to this task. Yet, pragmatic, or effectiveness, trials are infrequently carried out. This mismatch between the design of clinical trials and the needs of health care professionals is frustrating for everyone involved, and explains some of the challenges inherent in attempts to enhance knowledge translation and encourage evidence-based practice. The situation is more than simply frustrating, however; it is potentially unethical. Clinical trials must be socially valuable in order to (1) warrant the risks they impose on human research subjects and (2) fairly and efficiently assess new clinical interventions. Most bioethicists would agree that trials that have no social value, for instance, because their results do not have the potential to advance clinical care, should not be performed. What is less widely appreciated is that given limited research resources, trials that are more socially valuable should be preferred to trials that are less socially valuable when all else is equal. With respect to clinical trial design, I argue that while explanatory trials often have some social value, many have less social value than their pragmatic counterparts. On the basis of this general ethical assessment, I provide a preliminary defense of the position that clinical researchers should aim to conduct pragmatic trials, that is, that researchers face a burden of justification related to any idealizing elements added to trial designs.

  11. Land use as an explanatory factor for potential phosphorus loss risk, assessed by P indices and their governing parameters.

    PubMed

    Zhou, Bin; Vogt, Rolf D; Lu, Xueqiang; Yang, Xiaoguang; Lü, Changwei; Mohr, Christian W; Zhu, Liang

    2015-08-01

    The total level of phosphorus (P) and the distribution of P pools in the topsoil are significantly affected by the excessive application of mineral and organic fertilizers connected with intensive agriculture. This leads to an increased potential risk for P loss, and then contributes to freshwater eutrophication. Soil test P (STP), P sorption index (PSI) and degree of P saturation (DPS) are commonly applied as proxies for assessing the risk of P loss. Although conceptually based, the empirical relationships between these operationally defined proxies and the actual P flux exhibit large spatial variations. Herein, a comprehensive synoptic study and monitoring of soil has been conducted in a watershed in north-eastern China. A set of conventional indicators for soil P loss risk were measured along with the main P pools, P sorption indices, texture, organic matter, as well as Fe and Al oxides and other mineral compositions. Moreover, detailed soil P speciation was conducted using phosphorus nuclear magnetic resonance ((31)P NMR) spectroscopy. In addition, phosphatase activities in the soils were determined for each land use soil category. The results reflected that the soil content of total P, total inorganic P and STP increased significantly following the order of increasing management intensity. STP, being strongly coupled to the application of P fertilizers, was a strong explanatory factor for the spatial differences in DPS - both between and within different land uses. The dominant inorganic and organic P species in the soils were orthophosphate and monoester-P, respectively. Their contents were oppositely correlated with the degree of management influence, with the amount of orthophosphate positively related. Alkaline phosphomonoesterase (AlP) represented the highest activities among the four representative phosphatases, i.e. enzymes that hydrolyze organic P - releasing labile orthophosphate. Orchard soils were found to contain the highest levels of monoester P

  12. Classification of natural and supernatural causes of mental distress. Development of a Mental Distress Explanatory Model Questionnaire.

    PubMed

    Eisenbruch, M

    1990-11-01

    This paper describes the background and development of a Mental Distress Explanatory Model Questionnaire designed to explore how people from different cultures explain mental distress. A 45-item questionnaire was developed with items derived from the Murdock et al. categories, with additional items covering western notions of physiological causation and stress. The questionnaire was administered to 261 people, mostly college students. Multi-dimensional scaling analysis shows four clusters of mental distress: a) stress; b) western physiological; c) nonwestern physiological; and d) supernatural. These clusters form two dimensions: western physiological vs. supernatural and impersonal vs. personalistic explanations. Natural and stress items are separated from supernatural and nonwestern physiological items along the first dimension. Brain damage, physical illness, and genetic defects have the greatest separation along the first dimension. Being hot, the body being out of balance, and wind currents passing through the body most strongly represent the non-western physiological category. The questionnaire has the potential to be used for community health screening and for monitoring patient care, as well as with students in the health sciences and with health practitioners.

  13. Socioeconomic inequalities in prostate cancer survival: A review of the evidence and explanatory factors.

    PubMed

    Klein, Jens; von dem Knesebeck, Olaf

    2015-10-01

    Although survival rates after prostate cancer diagnosis have improved in the past two decades, survival analyses regarding the socioeconomic status (SES) suggest inequalities indicating worse prognosis for lower SES groups. An overview of the current literature is lacking and moreover, there is an ongoing discussion about the underlying causes but evidence is comparatively sparse. Several patient, disease and health care related factors are discussed to have an important impact on disparities in survival. Therefore, a systematic review was conducted to sum up the current evidence of survival inequalities and the contribution of different potential explanatory factors among prostate cancer patients. The PubMed database was screened for relevant articles published between January 2005 and September 2014 revealing 330 potentially eligible publications. After systematic review process, 46 papers met the inclusion criteria and were included in the review. About 75% of the studies indicate a significant association between low SES and worse survival among prostate cancer patients in the fully adjusted model. Overall, hazard ratios (low versus high SES) range from 1.02 to 3.57. A decrease of inequalities over the years was not identified. 8 studies examined the impact of explanatory factors on the association between SES and survival by progressive adjustment indicating mediating effects of comorbidity, stage at diagnosis and treatment modalities. Eventually, an apparent majority of the obtained studies indicates lower survival among patients with lower SES. The few studies that intend to explain inequalities found out instructive results regarding different contributing factors but evidence is still insufficient.

  14. Effects of executive impairments on maladaptive explanatory styles in substance abusers: clinical implications.

    PubMed

    García, Antonio Verdejo; Torrecillas, Francisca López; de Arcos, Francisco Aguilar; García, Miguel Pérez

    2005-01-01

    Our study examined the relation between neuropsychological impairment of executive functions and explanatory styles, according to the Abramson model of learned helplessness in humans, in a sample of substance abusers. Thirty-eight polysubstance abusers were assessed during an abstinence period using a selective neuropsychological battery for the evaluation of the executive functions, as well as the Attributional Style Questionnaire (ASQ) for the assessment of the three dimensions of explanatory style: Internality-Externality, Stability-Instability and Globality-Specificity. Multiple regression analyses showed significant relationships among performance on different neuropsychological tasks sensitive to executive functions and characteristic cognitive styles. The results showed the performance on cognitive flexibility and response inhibition tasks is directly related to making more internal attributions for positive situations, and inversely related to the appearance of more stable attributions for negative events. Likewise, adequate performance on working memory tasks was related to development of more global attributions for failures. These results are partially congruent with the learned helplessness model and particularly relevant for the clinical management of substance abusers and the success on the treatment and rehabilitation of these subjects.

  15. Explanatory models of addictive behaviour among native German, Russian-German, and Turkish youth.

    PubMed

    Penka, S; Heimann, H; Heinz, A; Schouler-Ocak, M

    2008-01-01

    In Germany, the public system of addiction treatment is used less by migrants with addictive disorders than by their non-migrant counterparts. To date, the literature has focused primarily on language, sociocultural factors, and residence status when discussing access barriers to this part of the health care system. However, little attention has been paid to cultural differences in explanatory models of addictive behaviour. This is surprising when we consider the important role played by popular knowledge in a population's perceptions of and responses to illnesses, including their causes, symptoms, and treatment. In the present study, we examined explanatory models of addictive behaviour and of mental disorders in 124 native German und Russian-German youth and compared these models to those observed in an earlier study of 144 German and Turkish youth. We employed the free listing technique German and to compile the terms that participating subjects used to describe addictive behaviour. Subsequently, we examined how a subset of our study population assigned these terms to the respective disorders by means of the pile sort method. Although the explanatory models used by the German and Russian-German youth in our study were surprisingly similar, those employed by Turkish youth did not make any fundamental distinction between illegal and legal drugs (e.g. alcohol and nicotine). German and Russian-German youth regarded eating disorders as "embarrassing" or "disgraceful", but Turkish youth did not. Unlike our German and Russian-German subjects, the Turkish youth did not classify eating disorders as being addictive in nature. Moreover, medical concepts crucial to a proper understanding of dependence disorders (e.g. the term "physical dependence") were characterised by almost half of our Turkish subjects as useless in describing addictions. These findings show that it is impossible to translate medical or everyday concepts of disease and treatment properly into a different

  16. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Articles Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    It is important to realize that some test-articles may have significant sound absorption that may challenge the acoustic power capabilities of a test facility. Therefore, to mitigate this risk of not being able to meet the customers target spectrum, it is prudent to demonstrate early-on an increased acoustic power capability which compensates for this test-article absorption. This paper describes a concise method to reduce this risk when testing aerospace test-articles which have significant absorption. This method was successfully applied during the SpaceX Falcon 9 Payload Fairing acoustic test program at the NASA Glenn Research Center Plum Brook Stations RATF.

  17. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  18. Detection of outliers in the response and explanatory variables of the simple circular regression model

    NASA Astrophysics Data System (ADS)

    Mahmood, Ehab A.; Rana, Sohel; Hussin, Abdul Ghapor; Midi, Habshah

    2016-06-01

    The circular regression model may contain one or more data points which appear to be peculiar or inconsistent with the main part of the model. This may be occur due to recording errors, sudden short events, sampling under abnormal conditions etc. The existence of these data points "outliers" in the data set cause lot of problems in the research results and the conclusions. Therefore, we should identify them before applying statistical analysis. In this article, we aim to propose a statistic to identify outliers in the both of the response and explanatory variables of the simple circular regression model. Our proposed statistic is robust circular distance RCDxy and it is justified by the three robust measurements such as proportion of detection outliers, masking and swamping rates.

  19. 'Individualism-collectivism' as an explanatory device for mental illness stigma.

    PubMed

    Papadopoulos, Chris; Foster, John; Caldwell, Kay

    2013-06-01

    The aim of this study is investigate whether the cross-cultural value paradigm 'individualism-collectivism' is a useful explanatory model for mental illness stigma on a cultural level. Using snowball sampling, a quantitative questionnaire survey of 305 individuals from four UK-based cultural groups (white-English, American, Greek/Greek Cypriot, and Chinese) was carried out. The questionnaire included the 'Community Attitudes to Mental Illness scale' and the 'vertical-horizontal individualism-collectivism scale'. The results revealed that the more stigmatizing a culture's mental illness attitudes are, the more likely collectivism effectively explains these attitudes. In contrast, the more positive a culture's mental illness attitudes, the more likely individualism effectively explains attitudes. We conclude that a consideration of the individualism-collectivism paradigm should be included in any future research aiming to provide a holistic understanding of the causes of mental illness stigma, particularly when the cultures stigmatization levels are particularly high or low.

  20. An explanatory model for state Medicaid per capita prescription drug expenditures.

    PubMed

    Roy, Sanjoy; Madhavan, S Suresh

    2012-01-01

    Rising prescription drug expenditure is a growing concern for publicly funded drug benefit programs like Medicaid. To be able to contain drug expenditures in Medicaid, it is important that cause(s) for such increases are identified. This study attempts to establish an explanatory model for Medicaid prescription drugs expenditure based on the impacts of key influencers/predictors identified using a comprehensive framework of drug utilization. A modified Andersen's behavior model of health services utilization is employed to identify potential determinants of pharmaceutical expenditures in state Medicaid programs. Level of federal matching funds, access to primary care, severity of diseases, unemployment, and education levels were found to be key influencers of Medicaid prescription drug expenditure. Increases in all, except education levels, were found to result in increases in drug expenditures. Findings from this study could better inform intervention policies and cost-containment strategies for state Medicaid drug benefit programs.

  1. Minority women and breast cancer screening: the role of cultural explanatory models.

    PubMed

    Rajaram, S S; Rashidi, A

    1998-01-01

    Mammography and clinical breast exams are effective secondary prevention techniques for reducing the morbidity and mortality due to breast cancer. Although minority women have higher mortality rates due to breast cancer, they are less likely than white women to use screening procedures. This paper provides a complementary understanding of the use of breast cancer screening among minority women by drawing attention to the role of women's cultural explanatory models (CEMs). CEMs stem from the sociocultural context and involve cultural beliefs and values, personal life experiences, and both biomedical and popular explanations of health and illness. Although women's CEMs may not accord with those of health professionals, they do have an impact on screening behavior. This paper discusses suggestions for addressing these issues in an effort to improve breast cancer screening rates through adopting a cultural relativistic approach.

  2. An explanatory heuristic gives rise to the belief that words are well suited for their referents.

    PubMed

    Sutherland, Shelbie L; Cimpian, Andrei

    2015-10-01

    The mappings between the words of a language and their meanings are arbitrary. There is, for example, nothing inherently dog-like about the word dog. And yet, building on prior evidence (e.g., Brook, 1970; Piaget, 1967), the six studies reported here (N=1062) suggest that both children and (at least to some extent) adults see a special "fit" between objects and their names, as if names were particularly suitable or appropriate for the objects they denote. These studies also provide evidence for a novel proposal concerning the source of these nominal fit beliefs. Specifically, beliefs about nominal fit may be a byproduct of the heuristic processes that people use to make sense of the world more generally (Cimpian & Salomon, 2014a). In sum, the present studies provide new insights into how people conceive of language and demonstrate that these conceptions are rooted in the processes that underlie broader explanatory reasoning.

  3. Remotely sensed vegetation moisture as explanatory variable of Lyme borreliosis incidence

    NASA Astrophysics Data System (ADS)

    Barrios, J. M.; Verstraeten, W. W.; Maes, P.; Clement, J.; Aerts, J. M.; Farifteh, J.; Lagrou, K.; Van Ranst, M.; Coppin, P.

    2012-08-01

    The strong correlation between environmental conditions and abundance and spatial spread of the tick Ixodes ricinus is widely documented. I. ricinus is in Europe the main vector of the bacterium Borrelia burgdorferi, the pathogen causing Lyme borreliosis (LB). Humidity in vegetated systems is a major factor in tick ecology and its effects might translate into disease incidence in humans. Time series of two remotely sensed indices with sensitivity to vegetation greenness and moisture were tested as explanatory variables of LB incidence. Wavelet-based multiresolution analysis allowed the examination of these signals at different temporal scales in study sites in Belgium, where increases in LB incidence were reported in recent years. The analysis showed the potential of the tested indices for disease monitoring, the usefulness of analyzing the signal in different time frames and the importance of local characteristics of the study area for the selection of the vegetation index.

  4. Noise as an explanatory factor in work-related fatality reports.

    PubMed

    Deshaies, Pierre; Martin, Richard; Belzile, Danny; Fortier, Pauline; Laroche, Chantal; Leroux, Tony; Nélisse, Hugues; Girard, Serge-André; Arcand, Robert; Poulin, Maurice; Picard, Michel

    2015-01-01

    Noise exposure in the workplace is a common reality in Québec, Canada as it is elsewhere. However, the extent to which noise acts as a causal or contributive factor in industrial work-related accidents has not been studied thoroughly despite its plausibility. This article aims to describe the importance or potential importance, during investigations looking into the specific causes of each work-related fatal accident, of noise as an explanatory factor. The written information contained in the accident reports pertaining to contextual and technical elements were used. The study used multiple case qualitative content analysis. This descriptive study was based on the content analysis of the 788 reports from the Commission de la santé et de la sécurité du travail du Québec [Workers' Compensation Board (WCB)] investigating the fatal work-related accidents between 1990 and 2005. The study was descriptive (number and percentages). Noise was explicitly stated as one of the explanatory factors for the fatal outcome in 2.2% (17/788) of the fatal accidents, particularly when the work involved vehicular movement or the need to communicate between workers. Noise was not typically considered a unique cause in the accident, notably because the investigators considered that the accident would have probably occurred due to other risk factors (for example, disregard of safety rules, shortcomings in work methods, and inadequate training). Noise is an important risk factor when communication is involved in work. Since noise is ubiquitous and may also interfere with vigilance and other risk factors for accidents, it may be a much more important contributing factor to accidents than is currently recognized.

  5. Extending the explanatory utility of the EPPM beyond fear-based persuasion.

    PubMed

    Lewis, Ioni; Watson, Barry; White, Katherine M

    2013-01-01

    In the 20 years since its inception, the Extended Parallel Process Model (EPPM) has attracted much empirical support. Currently, and unsurprisingly, given that is a model of fear-based persuasion, the EPPM's explanatory utility has been based only upon fear-based messages. However, an argument is put forth herein that draws upon existing evidence that the EPPM may be an efficacious framework for explaining the persuasive process and outcomes of emotion-based messages more broadly when such messages are addressing serious health topics. For the current study, four different types of emotional appeals were purposefully devised and included a fear-, an annoyance/agitation-, a pride-, and a humor-based message. All messages addressed the serious health issue of road safety, and in particular the risky behavior of speeding. Participants (n = 551) were exposed to only one of the four messages and subsequently provided responses within a survey. A series of 2 (threat: low, high) × 2 (efficacy: low, high) analysis of variance was conducted for each of the appeals based on the EPPM's message outcomes of acceptance and rejection. Support was found for the EPPM with a number of main effects of threat and efficacy emerging, reflecting that, irrespective of emotional appeal type, high levels of threat and efficacy enhanced message outcomes via maximizing acceptance and minimizing rejection. Theoretically, the findings provide support for the explanatory utility of the EPPM for emotion-based health messages more broadly. In an applied sense, the findings highlight the value of adopting the EPPM as a framework when devising and evaluating emotion-based health messages for serious health topics.

  6. Explanatory model of illness of the patients with schizophrenia and the role of educational intervention.

    PubMed

    Awan, Naila Riaz; Jehangir, Syeda Farhana; Irfan, Muhammad; Naeem, Farooq; Farooq, Saeed

    2017-03-10

    This randomized controlled trial was conducted at Department of Psychiatry, Lady Reading Hospital, Peshawar from February to August 2015 to explore beliefs and concepts of patients with schizophrenia about their illness and to find out the effectiveness of structured educational intervention in changing the explanatory models of illness of the patients and in their symptoms reduction. One hundred and three patients were recruited in the trial who were randomly assigned to two groups i.e., Experimental (n=53) and Control i.e., Treatment As Usual, TAU (n=50). Intervention was applied to experimental group only, once a month for three months. Short Explanatory Model Interview (SEMI), Brief Psychiatric Rating Scale (BPRS), Positive And Negative Syndrome Scale (PANSS), Global Assessment of Functioning (GAF) and Compliance Rating Scale were applied on all patients at baseline and at 3months follow up. Scores on PANSS (Total), BPRS and GAF showed improvement in the experimental group as compared to TAU group, at follow up, with the p values of 0.000, 0.002 and 0.000, respectively. On follow up, 44 (95.6%) patients of experimental group achieved complete compliance as compared to 17 (47.2%) patients of TAU group [p=0.000]. On baseline analysis of SEMI, in the experimental group, only 3.8% (n=2) knew about name of the illness, which increased to 54.3% (n=25) on follow up, while in TAU group it improved to 5.6% (n=2) as compared to 0% at baseline (p=0.000). The result suggest that Structured educational intervention can be effective in modifying the beliefs of the patients regarding their illness.

  7. Noise as an explanatory factor in work-related fatality reports

    PubMed Central

    Deshaies, Pierre; Martin, Richard; Belzile, Danny; Fortier, Pauline; Laroche, Chantal; Leroux, Tony; Nélisse, Hugues; Girard, Serge-André; Arcand, Robert; Poulin, Maurice; Picard, Michel

    2015-01-01

    Noise exposure in the workplace is a common reality in Québec, Canada as it is elsewhere. However, the extent to which noise acts as a causal or contributive factor in industrial work-related accidents has not been studied thoroughly despite its plausibility. This article aims to describe the importance or potential importance, during investigations looking into the specific causes of each work-related fatal accident, of noise as an explanatory factor. The written information contained in the accident reports pertaining to contextual and technical elements were used. The study used multiple case qualitative content analysis. This descriptive study was based on the content analysis of the 788 reports from the Commission de la santé et de la sécurité du travail du Québec [Workers’ Compensation Board (WCB)] investigating the fatal work-related accidents between 1990 and 2005. The study was descriptive (number and percentages). Noise was explicitly stated as one of the explanatory factors for the fatal outcome in 2.2% (17/788) of the fatal accidents, particularly when the work involved vehicular movement or the need to communicate between workers. Noise was not typically considered a unique cause in the accident, notably because the investigators considered that the accident would have probably occurred due to other risk factors (for example, disregard of safety rules, shortcomings in work methods, and inadequate training). Noise is an important risk factor when communication is involved in work. Since noise is ubiquitous and may also interfere with vigilance and other risk factors for accidents, it may be a much more important contributing factor to accidents than is currently recognized. PMID:26356371

  8. An explanatory model of peer education within a complex medicines information exchange setting.

    PubMed

    Klein, Linda A; Ritchie, Jan E; Nathan, Sally; Wutzke, Sonia

    2014-06-01

    Studies of the effectiveness and value of peer education abound, yet there is little theoretical understanding of what lay educators actually do to help their peers. Although different theories have been proposed to explain components of peer education, a more complete explanatory model has not been established empirically that encompasses the many aspects of peer education and how these may operate together. The Australian Seniors Quality Use of Medicines Peer Education Program was developed, in conjunction with community partners, to improve understanding and management of medicines among older people - an Australian and international priority. This research investigated how peer educators facilitated learning about quality use of medicines among older Australians. Participatory action research was undertaken with volunteer peer educators, using a multi-site case study design within eight geographically-defined locations. Qualitative data from 27 participatory meetings with peer educators included transcribed audio recordings and detailed observational and interpretive notes, which were analysed using a grounded theory approach. An explanatory model arising from the data grouped facilitation of peer learning into four broad mechanisms: using educator skills; offering a safe place to learn; pushing for change; and reflecting on self. Peer educators' life experience as older people who have taken medicines was identified as an overarching contributor to peer learning. As lay persons, peer educators understood the potential disempowerment felt when seeking medicines information from health professionals and so were able to provide unique learning experiences that encouraged others to be 'active partners' in their own medicines management. These timely findings are linked to existing education and behaviour change theories, but move beyond these by demonstrating how the different elements of what peer educators do fit together. In-depth examination of peer educators

  9. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption during Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    The exposure of a customers aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facilitys available acoustic power capability becomes maximized with the test-article installed during the actual test then the customers environment requirement may become compromised. In order to understand the risk of not achieving the customers in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Stations Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

  10. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    The exposure of a customer's aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facility's available acoustic power capability becomes maximized with the test-article installed during the actual test then the customer's environment requirement may become compromised. In order to understand the risk of not achieving the customer's in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Station's Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

  11. Additional considerations and recommendations for the quantification of hand-grip strength in the measurement of leg power during high-intensity cycle ergometry.

    PubMed

    Baker, Julien Steven; Davies, Bruce

    2009-01-01

    The purpose of this study was to further examine the influence of hand-grip strength on power profiles and blood lactate values during high-intensity cycle ergometry. Fifteen male subjects each completed a 20-second cycle ergometer test twice, in a random manner, using two protocols, with a hand grip (WG), and without hand grip (WOHG). Hand-grip strength was quantified prior to exercise using a hand-grip dynamometer. Capillary (earlobe) blood was collected at rest, immediately following exercise, and 5 minutes postexercise. In the WG protocol, mean (+/-SD) blood lactate concentrations were 1.11 +/- 0.7 mmol.l( -1), 3.68 +/- 1.2 mmol.l( -1), and 8.14 +/- 1.3 mmol.l( -1), respectively. During the WOHG protocol, blood lactate values recorded were 0.99 +/- 0.9 mmol.l( -1), 3.68 +/- 1.1 mmol.l( -1), and 6.62 +/- 0.9 mmol.l( -1), respectively. Differences in lactate concentrations were found (P < 0.05) from rest to 5 minutes postexercise for both groups. Differences in concentrations also were observed between groups at the 5-minutes postexercise stage. Peak power output and fatigue index values also were greater using the WG protocol (792 +/- 73 W vs. 624 +/- 66 W; 38 +/- 6 vs. 24 +/- 8 W respectively; P< 0.05). No differences were recorded for mean power output (MPO) or work done (WD) between experimental conditions. These findings suggest that the performance of traditional style leg cycle ergometry is influenced by a muscular contribution from the upper body and by upper body strength.

  12. Effect of organic additives on the mitigation of volatility of 1-nitro-3,3'-dinitroazetidine (TNAZ): next generation powerful melt cast able high energy material.

    PubMed

    Talawar, M B; Singh, Alok; Naik, N H; Polke, B G; Gore, G M; Asthana, S N; Gandhe, B R

    2006-06-30

    1-Nitro-3,3'-dinitroazetidine (TNAZ) was synthesized based on the lines of reported method. Thermolysis studies on synthesized and characterized TNAZ using differential scanning calorimetry (DSC) and hyphenated TG-FT-IR techniques were undertaken to generate data on decomposition pattern. FT-IR of decomposition products of TNAZ revealed the evolution of oxides of nitrogen and HCN containing species suggesting the cleavage of C/N-NO(2) bond accompanied with the collapse of ring structure. The effect of incorporation of 15% additives namely, 3-amino-1,2,4-triazole (AT), 3,5-diamino-1,2,4-triazole (DAT), carbohydrazide (CHZ), 5,7-dinitrobenzofuroxan (DNBF), bis (2,2-dinitropropyl) succinate (BNPS), triaminoguanidinium nitrate (TAGN), 2,4,6-trinitrobenzoic acid (TNBA) and nitroguanidine (NQ) on the volatility of TNAZ was investigated by undertaking thermogravimetric analysis. The TG pattern brings out the potential of BNPS and TAGN as additives to mitigate the volatility of TNAZ. The influence of additives on thermal decomposition of pattern of TNAZ was also investigated by DSC. The DSC results indicated that the additives did not have appreciable effect on the melting point of TNAZ. Scanning electron microscopic (SEM) studies were carried out to investigate the effect of additives on morphology of TNAZ. This paper also discusses the possible mechanism involved in between the TNAZ and TAGN and BNPS. It appears that the formation of charge transfer complex formation between the TNAZ and TAGN/BNPS. The effect of addition of high explosives such as CL-20, HMX and RDX on thermo-physical characteristics of TNAZ is also reported in this paper.

  13. Food additives

    MedlinePlus

    ... or natural. Natural food additives include: Herbs or spices to add flavor to foods Vinegar for pickling ... Certain colors improve the appearance of foods. Many spices, as well as natural and man-made flavors, ...

  14. Causes of Job Turnover in the Public School Superintendency: An Explanatory Analysis in the Western United States

    ERIC Educational Resources Information Center

    Melver, Toby A.

    2011-01-01

    The purpose of this mixed-methods study was to determine the factors that affect public school superintendent turnover in five western states. An explanatory theory was developed to cover all of the possible variables and show the relationship between those variables. The questions that guided this research study were: (1) What environmental…

  15. Self-Consciousness and Assertiveness as Explanatory Variables of L2 Oral Ability: A Latent Variable Approach

    ERIC Educational Resources Information Center

    Ockey, Gary

    2011-01-01

    Drawing on current theories in personality, second-language (L2) oral ability, and psychometrics, this study investigates the extent to which self-consciousness and assertiveness are explanatory variables of L2 oral ability. Three hundred sixty first-year Japanese university students who were studying English as a foreign language participated in…

  16. Interparental Conflict and Children's School Adjustment: The Explanatory Role of Children's Internal Representations of Interparental and Parent-Child Relationships

    ERIC Educational Resources Information Center

    Sturge-Apple, Melissa L.; Davies, Patrick T.; Winter, Marcia A.; Cummings, E. Mark; Schermerhorn, Alice

    2008-01-01

    This study examined how children's insecure internal representations of interparental and parent-child relationships served as explanatory mechanisms in multiple pathways linking interparental conflict and parent emotional unavailability with the emotional and classroom engagement difficulties the children had in their adjustment to school. With…

  17. Sur la notion d'adequation explicative en phonologie generative (On the Notion of Explanatory Adequacy in Generative Phonology)

    ERIC Educational Resources Information Center

    Hind, A.

    1976-01-01

    Discusses the notion of explanatory adequacy with reference to a theory of generative phonology. An approach is suggested which defines the notion of possible processes based on natural language rules, rather than one which defines the notion of possible rules based on universal processes. (Text is in French.) (CDSH/AM)

  18. CAVEing the MMPI for an Optimism-Pessimism Scale: Seligman's Attributional Model and the Assessment of Explanatory Style.

    ERIC Educational Resources Information Center

    Colligan, Robert C.; And Others

    1994-01-01

    Developed bipolar Minnesota Multiphasic Personality Inventory (MMPI) Optimism-Pessimism (PSM) scale based on results on Content Analysis of Verbatim Explanation applied to MMPI. Reliability and validity indices show that PSM scale is highly accurate and consistent with Seligman's theory that pessimistic explanatory style predicts increased…

  19. Appreciative Accreditation: A Mixed Methods Explanatory Study of Appreciative Inquiry-Based Institutional Effectiveness Results in Higher Education

    ERIC Educational Resources Information Center

    Thibodeau, John

    2011-01-01

    This study examined the effects of using Appreciative Inquiry in accreditation and related institutional effectiveness activities within higher education. Using an explanatory participant-selection mixed methods approach, qualitative data from a series of interviews were used to explain the experiences of individuals identified from quantitative…

  20. Examination of the Relation between TEOG Score of Turkish Revolution History and Kemalism Course and Reading Comprehension Skill (An Example of Explanatory Sequential Mixed Design)

    ERIC Educational Resources Information Center

    Yuvaci, Ibrahim; Demir, Selçuk Besir

    2016-01-01

    This paper is aimed to determine the relation between reading comprehension skill and TEOG success. In this research, a mixed research method, sequential explanatory mixed design, is utilized to examine the relation between reading comprehension skills and TEOG success of 8th grade students throughly. In explanatory sequential mixed design…

  1. Diabetes meanings among those without diabetes: explanatory models of immigrant Latinos in rural North Carolina.

    PubMed

    Arcury, Thomas A; Skelly, Anne H; Gesler, Wilbert M; Dougherty, Molly C

    2004-12-01

    The prevalence of type 2 diabetes is increasing in the United States, particularly among minority individuals. Primary prevention programs for diabetes must be designed to address the beliefs of the populations they target. Little research has investigated the beliefs of those who do not have diabetes. This analysis uses in-depth interviews collected from Latino immigrants, not diagnosed with diabetes, living in a rural US community. Structured by the explanatory models [EM] of Illness framework, this analysis delineates the EMs of diabetes in this community. A significant number of the participants had little knowledge and few beliefs about diabetes. The EMs of those with knowledge of diabetes were varied, but several beliefs were widely held: (a) diabetes is a serious disease that is based on heredity or is inherent in all persons, (b) diabetes can result from several factors, including strong emotions and lifestyle characteristics (an unhealthy diet, not taking care of oneself), (c) beliefs about strong emotion and the importance of blood are related to diabetes causes, symptoms and treatment, and (d) a major and undesirable outcome of diabetes is weight loss. These results provide information for the design of health programs for the prevention of type 2 diabetes.

  2. An Explanatory Model of Poverty from the Perspective of Social Psychology and Human Rights.

    PubMed

    Pérez-Muñoz, Alfonso; Chacón, Fernando; Martínez Arias, Rosario

    2015-12-09

    Poverty is a social problem, entailing not only an economical perspective but above all a human and social issue. Poverty is promoted, justified and maintained by unique individuals and groups by means of our own attitudes, interests and behavior, as well as with our social structures and social relationships. From this interactive, psychosocial and sociostructural perspective, and also considering poverty as a denial of basic human rights (UNDP, 1998), we carried out a study with the primary objective to design and verify an Explanatory Model of Poverty. This research may helps to increase the validity of diagnostics and the effectiveness of interventions. Most of the hypotheses were accepted during the analysis and verification of the Model (p < .001), with data fitting the Model (CFI: 1 RMSEA: .025: LO90: 0 - HI90: .061. RMR: .008). These results, if replicated in new investigations, could have the following implications: (a) the need for a broad and comprehensive definition of poverty including its effects, processes and causes; (b) the need for everybody to accept the social responsibility in the prevention and solution to poverty; and

  3. Controlled but not cured: Structural processes and explanatory models of Chagas disease in tropical Bolivia.

    PubMed

    Forsyth, Colin

    2015-11-01

    Dressler (2001:456) characterizes medical anthropology as divided between two poles: the constructivist, which focuses on the "meaning and significance that events have for people," and the structuralist, which emphasizes socioeconomic processes and relationships. This study synthesizes structuralist and constructivist perspectives by investigating how structural processes impact explanatory models of Chagas disease in a highly endemic area. The research took place from March-June 2013 through the Centro Medico Humberto Parra, a non-profit clinic servicing low income populations in Palacios, Bolivia and surrounding communities. Semistructured interviews (n = 68) and consensus analysis questionnaires (n = 48) were administered to people dealing with Chagas disease. In the interview narratives, respondents link Chagas disease with experiences of marginalization and rural poverty, and describe multilayered impediments to accessing treatment. They often view the disease as incurable, but this reflects inconsistent messages from the biomedical system. The consensus analysis results show strong agreement on knowledge of the vector, ethnomedical treatment, and structural factors related to Chagas disease. In interpreting Chagas disease, respondents account for the structural factors which place them at risk and impede access to care.

  4. From built environment to health inequalities: An explanatory framework based on evidence

    PubMed Central

    Gelormino, Elena; Melis, Giulia; Marietta, Cristina; Costa, Giuseppe

    2015-01-01

    Objective: The Health in All Policies strategy aims to engage every policy domain in health promotion. The more socially disadvantaged groups are usually more affected by potential negative impacts of policies if they are not health oriented. The built environment represents an important policy domain and, apart from its housing component, its impact on health inequalities is seldom assessed. Methods: A scoping review of evidence on the built environment and its health equity impact was carried out, searching both urban and medical literature since 2000 analysing socio-economic inequalities in relation to different components of the built environment. Results: The proposed explanatory framework assumes that key features of built environment (identified as density, functional mix and public spaces and services), may influence individual health through their impact on both natural environment and social context, as well as behaviours, and that these effects may be unequally distributed according to the social position of individuals. Conclusion: In general, the expected links proposed by the framework are well documented in the literature; however, evidence of their impact on health inequalities remains uncertain due to confounding factors, heterogeneity in study design, and difficulty to generalize evidence that is still very embedded to local contexts. PMID:26844145

  5. How can peer group influence the behavior of adolescents: explanatory model.

    PubMed

    Tomé, Gina; Matos, Margarida; Simões, Celeste; Diniz, José Alves; Camacho, Inês

    2012-02-29

    The current work aims to study both the peer group and family influence on adolescent behaviour. In order to achieve the aforementioned objective, an explanatory model based on the Structural Equations Modelling (SEM) was proposed. The sample used was the group of adolescents that participated in the Portuguese survey of the European study Health Behaviour in School-aged Children (HBSC). The Portuguese survey included students from grades 6, 8 and 10 within the public education system, with an average age of 14 years old (SD=1.89). The total sample of the HBSC study carried out in 2006 was 4,877; however with the use of the SEM, 1,238 participants were lost out of the total sample. The results show that peers have a direct influence in adolescents' risk behaviours. The relationship with parents did not demonstrate the expected mediation effect, with the exception of the following elements: relation between type of friends and risk behaviour; and communication with parent and lesser involvement in violence behaviours and increased well-being. The negative influence of the peer group is more connected to the involvement in risk behaviours, whilst the positive influence is more connected with protective behaviours.

  6. An explanatory model of functional exercise capacity in patients with systemic sclerosis: considerations for rehabilitation programs

    PubMed Central

    Lopes, Agnaldo José; Ferreira, Arthur de Sá; Lima, Tatiana Rafaela Lemos; Menezes, Sara Lucia Silveira; Guimarães, Fernando Silva

    2016-01-01

    [Purpose] This study aimed to evaluate the impact of lung function and peripheral muscle function on the six-minute walking distance (6MWD) in systemic sclerosis (SS) patients and, thereby, to develop an explanatory model of functional exercise capacity for these individuals. [Methods] In a cross-sectional study, 31 SS patients underwent pulmonary function testing (including spirometry, diffusing capacity for carbon monoxide [DLCO], and respiratory muscle strength), isometric dynamometry with surface electromyography, and the 6MWD. [Results] There was a significant correlation between the 6MWD (% predicted, 6MWD%) and the following parameters: height (r = 0.427) and DLCO (r = 0.404). In contrast, no other independent variable showed a significant correlation with the 6MWD% (r ≤ 0.257). The final prediction model for 6MWD% (adjusted R2 = 0.456, SE of bias=12%) was 6MWD% Gibbons = −131.3 + 1.16 × heightcm + 0.33 × DLCO% predicted. [Conclusion] In SS patients, body height and pulmonary diffusion are the main determinants of the 6MWD. Our results justify further investigation of the performance of SS patients during exercise, which may increase the understanding of the pathophysiological mechanisms involved in the disease. The impact of these findings in SS patients may be useful for evaluating the effects of rehabilitation programs. PMID:27065545

  7. Computer-mediated communication and interpersonal attraction: an experimental test of two explanatory hypotheses.

    PubMed

    Antheunis, Marjolijn L; Valkenburg, Patti M; Peter, Jochen

    2007-12-01

    The aims of this study were (a) to investigate the influence of computer-mediated communication (CMC) on interpersonal attraction and (b) to examine two underlying processes in the CMC-interpersonal attraction relationship. We identified two variables that may mediate the influence of CMC on interpersonal attraction: self-disclosure and direct questioning. Focusing on these potential mediating variables, we tested two explanatory hypotheses: the CMC-induced direct questioning hypothesis and the CMC-induced self-disclosure hypothesis. Eighty-one cross-sex dyads were randomly assigned to one of three experimental conditions: text-only CMC, visual CMC, and face-to-face communication. We did not find a direct effect of CMC on interpersonal attraction. However, we did find two positive indirect effects of text-only CMC on interpersonal attraction: text-only CMC stimulated both self-disclosure and direct questioning, both of which in turn enhanced interpersonal attraction. Results are discussed in light of uncertainty reduction theory and CMC theories.

  8. Explanatory Models of Genetics and Genetic Risk among a Selected Group of Students

    PubMed Central

    Goltz, Heather Honoré; Bergman, Margo; Goodson, Patricia

    2016-01-01

    This exploratory qualitative study focuses on how college students conceptualize genetics and genetic risk, concepts essential for genetic literacy (GL) and genetic numeracy (GN), components of overall health literacy (HL). HL is dependent on both the background knowledge and culture of a patient, and lower HL is linked to increased morbidity and mortality for a number of chronic health conditions (e.g., diabetes and cancer). A purposive sample of 86 students from three Southwestern universities participated in eight focus groups. The sample ranged in age from 18 to 54 years, and comprised primarily of female (67.4%), single (74.4%), and non-White (57%) participants, none of whom were genetics/biology majors. A holistic-content approach revealed broad categories concerning participants’ explanatory models (EMs) of genetics and genetic risk. Participants’ EMs were grounded in highly contextualized narratives that only partially overlapped with biomedical models. While higher education levels should be associated with predominately knowledge-based EM of genetic risk, this study shows that even in well-educated populations cultural factors can dominate. Study findings reveal gaps in how this sample of young adults obtains, processes, and understands genetic/genomic concepts. Future studies should assess how individuals with low GL and GN obtain and process genetics and genetic risk information and incorporate this information into health decision making. Future work should also address the interaction of communication between health educators, providers, and genetic counselors, to increase patient understanding of genetic risk. PMID:27376052

  9. How Can Peer Group Influence the Behavior of Adolescents: Explanatory Model

    PubMed Central

    Tomé, Gina; de Matos, Margarida Gaspar; Simões, Celeste; Camacho, Inês; AlvesDiniz, José

    2012-01-01

    The current work aims to study both the peer group and family influence on adolescent behaviour. In order to achieve the aforementioned objective, an explanatory model based on the Structural Equations Modelling (SEM)was proposed. The sample used was the group of adolescents that participated in the Portuguese survey of the European study Health Behaviour in School-aged Children (HBSC). The Portuguese survey included students from grades 6, 8 and 10 within the public education system, with an average age of 14 years old (SD=1.89). The total sample of the HBSC study carried out in 2006 was 4,877; however with the use of the SEM, 1,238 participants were lost out of the total sample. The results show that peers have a direct influence in adolescents’ risk behaviours. The relationship with parents did not demonstrate the expected mediation effect, with the exception of the following elements: relation between type of friends and risk behaviour; and communication with parent and lesser involvement in violence behaviours and increased well-being. The negative influence of the peer group is more connected to the involvement in risk behaviours, whilst the positive influence is more connected with protective behaviours. PMID:22980148

  10. Parents' help-seeking behaviours during acute childhood illness at home: A contribution to explanatory theory.

    PubMed

    Neill, Sarah J; Jones, Caroline H D; Lakhanpaul, Monica; Roland, Damian T; Thompson, Matthew J

    2016-03-01

    Uncertainty and anxiety surround parents' decisions to seek medical help for an acutely ill child. Consultation rates for children are rising, yet little is known about factors that influence parents' help-seeking behaviours. We used focus groups and interviews to examine how 27 parents of children under five years, from a range of socioeconomic groups in the East Midlands of England, use information to make decisions during acute childhood illness at home. This article reports findings elucidating factors that influence help-seeking behaviours. Parents reported that decision-making during acute childhood illness was influenced by a range of personal, social and health service factors. Principal among these was parents' concern to do the right thing for their child. Their ability to assess the severity of the illness was influenced by knowledge and experience of childhood illness. When parents were unable to access their general practitioner (GP), feared criticism from or had lost trust in their GP, some parents reported using services elsewhere such as Accident and Emergency. These findings contribute to explanatory theory concerning parents' help-seeking behaviours. Professional and political solutions have not reduced demand; therefore, collaborative approaches involving the public and professionals are now needed to improve parents' access to information.

  11. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  12. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  13. Results from expert tests of the TP-100A boiler at the Lugansk thermal power station during the combustion of lean coal and anthracite culm with addition of RA-GEN-F anaklarid

    NASA Astrophysics Data System (ADS)

    Mikhailov, V. E.; Tupitsyn, S. P.; Sokolov, V. V.; Chebakova, G. F.; Malygin, V. I.; Yazykov, Yu. V.; Kharchenko, A. V.; Chetverikov, A. N.

    2012-08-01

    Results from expert tests of separated combustion of Grade T and Grade ASh anthracite culm in the TP-100A boiler No. 15 at the Lugansk thermal power station carried out with and without addition of RA-GEN-F anaklarid are presented. The possibility of extending the boiler load adjustment range and excluding the use of natural gas for supporting the flame at minimal loads is considered.

  14. The speech aversion hypothesis has explanatory power in a Minimal Speech Approach to aloof, non-verbal, severe autism.

    PubMed

    Whittaker, Christopher A

    2012-01-01

    In the search for 'pure autism', non-verbal children labeled aloof, Severely Autistic with Developmental Disabilities (ASA/DD), are routinely excluded from psychological research. This exclusion is predicated on the claim that they are indistinguishable from those with SLD/PMLD, which is refuted through a discussion of the extant literature. A novel, falsifiable, speech aversion hypothesis is proposed: "aloof, non-verbal young children (<7 years), with severe autism (CARS≥37), but without significant dysmorphic features, will show aversive reactions to complex speech (>2-3 words), but not to a silent interlocutor, or one imitating their vocalizations, in proximal encounters." Implications are examined by deconstructing the presenting symptoms of ASA/DD in response to the hypothesis. Supporting evidence is drawn from: Minimal Speech Approach (MSA) research showing high levels of spontaneous requests for social routines; a reinterpretation of still-face research as a still-(silent)-face paradigm; auditory processing MMN data employing EEG/MEG; and possible links to epileptiform activity and verbal auditory agnosia. Guidelines are established for future research. This hypothesis, if corroborated, would add to the auditory processing anomalies seen in severe autism and lead to synergies of existing and new areas of research, with significant theoretical, therapeutic, and educational implications.

  15. A Modified Actor-Power-Accountability Framework (MAPAF) for analyzing decentralized forest governance: case study from Ethiopia.

    PubMed

    Mohammed, Abrar Juhar; Inoue, Makoto

    2014-06-15

    This paper posits a Modified Actor-Power-Accountability Framework (MAPAF) that makes three major improvements on the Actor-Power-Accountability Framework (APAF) developed by Agrawal and Ribot (1999). These improvements emphasize the nature of decentralized property rights, linking the outputs of decentralization with its outcomes and the inclusion of contextual factors. Applying MAPAF to analyze outputs and outcomes from two major decentralized forest policies in Ethiopia, i.e., delegation and devolution, has demonstrated the following strengths of the framework. First, by incorporating vital bundles of property rights into APAF, MAPAF creates a common ground for exploring and comparing the extent of democratization achieved by different decentralizing reforms. Second, the inclusion of social and environmental outcomes in MAPAF makes it possible to link the output of decentralization with local level outcomes. Finally, the addition of contextual factors enhances MAPAF's explanatory power by providing room for investigating exogenous factors other than democratization that contribute to the outcomes of decentralization reforms.

  16. Explanatory Pluralism and the (Dis)Unity of Science: The Argument from Incompatible Counterfactual Consequences

    PubMed Central

    Gijsbers, Victor

    2016-01-01

    What is the relationship between different sciences or research approaches that deal with the same phenomena, for instance, with the phenomena of the human mind? Answers to this question range from a monist perspective according to which one of these approaches is privileged over the others, through an integrationist perspective according to which they must strive to form a unity greater than the sum of its parts, to an isolationist perspective according to which each of them has its own autonomous sphere of validity. In order to assess these perspectives in this article, I discuss the debates about the unity of science and about explanatory pluralism. The most pressing issue turns out to be the choice between the integrative and the isolationist perspective: the question is whether the integrative tendencies in science should be fully indulged in or whether they should be held in check by acknowledging that a certain amount of isolation is necessary. I argue that the issue can be further distilled into the question of whether two true explanations of the same fact can ever fail to be combinable into one single explanation. I show that this can indeed be the case, namely, when the explanations have incompatible counterfactual consequences, something that is often the case when we try to combine explanations from different sciences or research approaches. These approaches thus embody perspectives on the world that are to a certain extent autonomous. This leads to the conclusion that although interdisciplinarity may have many advantages, we should not take the project of integration too far. At the end of the day, the different research approaches with their different perspectives and insights must remain precisely that: different and somewhat disunified. PMID:27014099

  17. Explanatory Pluralism and the (Dis)Unity of Science: The Argument from Incompatible Counterfactual Consequences.

    PubMed

    Gijsbers, Victor

    2016-01-01

    What is the relationship between different sciences or research approaches that deal with the same phenomena, for instance, with the phenomena of the human mind? Answers to this question range from a monist perspective according to which one of these approaches is privileged over the others, through an integrationist perspective according to which they must strive to form a unity greater than the sum of its parts, to an isolationist perspective according to which each of them has its own autonomous sphere of validity. In order to assess these perspectives in this article, I discuss the debates about the unity of science and about explanatory pluralism. The most pressing issue turns out to be the choice between the integrative and the isolationist perspective: the question is whether the integrative tendencies in science should be fully indulged in or whether they should be held in check by acknowledging that a certain amount of isolation is necessary. I argue that the issue can be further distilled into the question of whether two true explanations of the same fact can ever fail to be combinable into one single explanation. I show that this can indeed be the case, namely, when the explanations have incompatible counterfactual consequences, something that is often the case when we try to combine explanations from different sciences or research approaches. These approaches thus embody perspectives on the world that are to a certain extent autonomous. This leads to the conclusion that although interdisciplinarity may have many advantages, we should not take the project of integration too far. At the end of the day, the different research approaches with their different perspectives and insights must remain precisely that: different and somewhat disunified.

  18. Height as an Explanatory Factor for Sex Differences in Human Cancer

    PubMed Central

    2013-01-01

    Background Most cancers occur more frequently in men. Numerous explanations for this excess risk have been proposed, yet no study has quantified the degree to which height explains the sex difference even though greater height has been associated with increased risk for many cancers. Methods During the period from 2000 to 2002, 65308 volunteers aged 50 to 76 years were recruited to the Vitamins And Lifestyle (VITAL) study. Cancers of shared anatomic sites (n = 3466) were prospectively identified through 2009 through the Surveillance, Epidemiology, and End Results cancer registry. Age- and race-adjusted hazard ratios (HRs) for the associations between sex and incident cancers were estimated using Cox proportional hazards models, with and without adjustment for height and height squared as measures of body size. Results Men had a 55% increased risk of cancer at shared sites (HR = 1.55; 95% confidence interval [CI] = 1.45 to 1.66). When height was accounted for, 33.8% (95% CI = 10.2% to 57.3%) of the excess risk for men was explained by the height differences between sexes. The proportion mediated by height was 90.9%, 57.3%, and 49.6% for kidney, melanoma, and hematologic malignancies, respectively, with little evidence that height mediates the sex difference for gastrointestinal tract, lung, and bladder cancers. For comparison, more than 35 lifestyle and medical risk factors only explained 23.1% of the sex difference in cancer risk at shared sites. Conclusions Height is an important explanatory factor for the excess risk for men for many shared-site cancers. This suggests that some of the excess risk is due to factors associated with height (eg, number of susceptible cells in a specific organ or growth-influencing exposures in childhood). PMID:23708052

  19. Posatirelin for the treatment of degenerative and vascular dementia: results of explanatory and pragmatic efficacy analyses.

    PubMed

    Gasbarrini, G; Stefanini, G; Addolorato, G; Foschi, F; Ricci, C; Bertolotti, P; Voltolini, G; Bonavita, E; Bertoncelli, R; Renzi, G; Bianchini, G; Bonaiuto, S; Giannandrea, E; Cavassini, G; Mazzini, V; Chioma, V; Marzara, G; D'Addetta, G; Totaro, G; Dalmonte, E; Tassini, D; Giungi, F; De Nitto, C; Di Fazio, G; Tessitore, A; Guadagnino, M; Tessitore, E; Spina, P; Luppi, M; Bignamini, A; Peracino, L; Fiorentino, M; Beun-Garbe, D; Poli, A; Ambrosoli, L; Girardello, R

    1998-01-01

    In order to confirm the efficacy and safety of posatirelin (L-pyro-2-aminoadipyl-L-leucyl-L-prolinamide), a synthetic peptide having cholinergic, catecholaminergic and neurotrophic activities, a multicentre, double-blind, controlled study versus placebo was planned in elderly patients suffering from Alzheimer's disease and vascular dementia, according to National Institute of Neurological and Communicative Disorders and Stroke/Alzheimer's Disease and Related Disorders Association (NINCDS-ADRDA) and National Institute of Neurological Disorders and Stroke/Association Internationale pour la Recherche et l'Enseignement en Neurosciences (NINDS-AIREN) criteria, respectively. The trial consisted of a 2-week run-in phase with placebo administered once a day orally, followed by a double-blind period of 3 months, with posatirelin or placebo administered once a day intramuscularly. Efficacy was assessed using the Gottfries-Bråne-Steen (GBS) Rating Scale (primary variable) and the Rey Memory Test (secondary variable). Laboratory tests, vital signs and adverse events were monitored. A total of 360 patients were randomized, the intent-to-treat sample (ITT) being made up of 357 patients and the per protocol sample (PP) of 260 patients. Both pragmatic and explanatory analyses showed significant differences between treatment groups in the GBS Rating Scale and the Rey Memory Test, with no difference in the two types of dementia. No difference between treatments was observed in safety variables, the incidence of adverse events in the posatirelin group being 7.3%. The study confirms previous results showing that treatment with posatirelin can improve cognitive and functional abilities of patients suffering from degenerative or vascular dementia.

  20. Strengthening the implementation of Health in All Policies: a methodology for realist explanatory case studies.

    PubMed

    Shankardass, Ketan; Renahy, Emilie; Muntaner, Carles; O'Campo, Patricia

    2015-05-01

    To address macro-social and economic determinants of health and equity, there has been growing use of intersectoral action by governments around the world. Health in All Policies (HiAP) initiatives are a special case where governments use cross-sectoral structures and relationships to systematically address health in policymaking by targeting broad health determinants rather than health services alone. Although many examples of HiAP have emerged in recent decades, the reasons for their successful implementation--and for implementation failures--have not been systematically studied. Consequently, rigorous evidence based on systematic research of the social mechanisms that have regularly enabled or hindered implementation in different jurisdictions is sparse. We describe a novel methodology for explanatory case studies that use a scientific realist perspective to study the implementation of HiAP. Our methodology begins with the formulation of a conceptual framework to describe contexts, social mechanisms and outcomes of relevance to the sustainable implementation of HiAP. We then describe the process of systematically explaining phenomena of interest using evidence from literature and key informant interviews, and looking for patterns and themes. Finally, we present a comparative example of how Health Impact Assessment tools have been utilized in Sweden and Quebec to illustrate how this methodology uses evidence to first describe successful practices for implementation of HiAP and then refine the initial framework. The methodology that we describe helps researchers to identify and triangulate rich evidence describing social mechanisms and salient contextual factors that characterize successful practices in implementing HiAP in specific jurisdictions. This methodology can be applied to study the implementation of HiAP and other forms of intersectoral action to reduce health inequities involving multiple geographic levels of government in diverse settings.

  1. Learning genetic inquiry through the use, revision, and justification of explanatory models

    NASA Astrophysics Data System (ADS)

    Cartier, Jennifer Lorraine

    Central to the process of inquiry in science is the construction and assessment of models that can be used to explain (and in some cases, predict) natural phenomena. This dissertation is a qualitative study of student learning in a high school biology course that was designed to give students opportunities to learn about genetic inquiry in part by providing them with authentic experiences doing inquiry in the discipline. With the aid of a computer program that generates populations of "fruit flies", the students in this class worked in groups structured like scientific communities to build, revise, and defend explanatory models for various inheritance phenomena. Analysis of the ways in which the first cohort of students assessed their inheritance models revealed that all students assessed models based upon empirical fit (data/model match). However, in contrast to the practice of scientists and despite explicit instruction, students did not consistently apply conceptual assessment criteria to their models. That is, they didn't seek consistency between underlying concepts or processes in their models and those of other important genetic models, such as meiosis. This is perhaps in part because they lacked an understanding of models as conceptual rather than physical entities. Subsequently, the genetics curriculum was altered in order to create more opportunities for students to address epistemological issues associated with model assessment throughout the course. The second cohort of students' understanding of models changed over the nine-week period: initially the majority of students equated scientific models with "proof" (generally physical) of "theories"; at the end of the course, most students demonstrated understanding of the conceptual nature of scientific models and the need to justify such knowledge according to both its empirical utility and conceptual consistency. Through model construction and assessment (i.e. scientific inquiry), students were able to

  2. Stuck in the past: negative bias, explanatory style, temporal order, and evaluative perspectives in life narratives of clinically depressed individuals.

    PubMed

    Habermas, Tilmann; Ott, Lisa-M; Schubert, Merve; Schneider, Beatrix; Pate, Anna

    2008-01-01

    This study attempted to replicate negative bias and depressive explanatory style in depression using life narratives. The two central aspects of narrative, temporal succession and evaluation, were also explored. These aspects were tested for the first time using entire life narratives of 17 depressed inpatients and non-depressed controls matched for sex and educational level. Negative bias and depressive explanatory style were replicated as typical for the depressed group. Life narratives of depressed patients also deviated more from a linear temporal order and compared less frequently the past with the present. Contrary to expectations, the depressed did not differ in the overall frequency of evaluations. However, they used more past than present evaluations and more experience-near evaluations than cognitive evaluations, suggesting that they are more immersed in past experiences. It is concluded that negative bias and depressive explanatory style can be found also in a naturalistic narrative measure, and that depression affects the two major aspects of narrative. It is argued that life narratives, as measures close to everyday clinical practice and as the most encompassing form of self-representation, should complement more experimental procedures in the study of cognitive and communicative processes in psychopathology.

  3. Long-acting injectable versus daily oral antipsychotic treatment trials in schizophrenia: pragmatic versus explanatory study designs.

    PubMed

    Bossie, Cynthia A; Alphs, Larry D; Correll, Christoph U

    2015-09-01

    Trial design characteristics related to the explanatory : pragmatic spectrum may contribute toward the inconsistent results reported in studies comparing long-acting injectable (LAI) versus daily oral antipsychotic (AP) treatments in schizophrenia. A novel approach examined the hypothesis that a more pragmatic design is important to show the advantages of LAI versus oral APs. A literature search identified comparative studies assessing the clinical efficacy/effectiveness of LAI versus oral APs in more than 100 schizophrenia patients, with 6-month or more duration/follow-up, and published between January 1993 and December 2013 (n=11). Each study's design was rated using the six-domain ASPECT-R (A Study Pragmatic : Explanatory Characterization Tool-Rating). Nonparametric Wilcoxon rank-sum tests compared ratings of studies supporting (n=7) and not supporting (n=4) a LAI advantage. ASPECT-R total and domain scores were significantly higher (more pragmatic) in studies finding a LAI versus oral AP treatment advantage than those that did not. The rank order of this significance among domains was as follows: 'participant compliance assessment' (P=0.005), 'medical practice setting/practitioner expertise' (P=0.006), 'intervention flexibility' (P=0.007), 'follow-up intensity/duration' (P=0.009), 'primary trial outcomes' (P=0.012), and 'participant eligibility' (P=0.015). Findings support that more pragmatic, less explanatory design features are important to show advantages for LAI treatment. Explanatory studies may introduce features that obscure advantages related to adherence.

  4. Writing Development in Secondary/Post Secondary Language Learning: Integrating Multiple Motivating Factors, Explanatory Feedback, and Explanatory Writing Tools to Increase Competence and Confidence in Writing

    ERIC Educational Resources Information Center

    Jefferson, Trevina

    2013-01-01

    Background: This study discusses data-driven results of newly-developed writing tools that are objective, easy, and less time-consuming than standard classroom writing strategies; additionally, multiple motivation triggers and peer evaluation are evaluated together with these new, modernized writing tools. The results are explained separately and…

  5. Impact hypothesis for offshore wind farms: Explanatory models for species distribution at extremely exposed rocky areas

    NASA Astrophysics Data System (ADS)

    Schläppy, Marie-Lise; Šaškov, Aleksej; Dahlgren, Thomas G.

    2014-07-01

    The increasing need for renewable and clean energy production is likely to result in a diversification of locations for the implementation of offshore wind farms which have been so far predominantly sited on soft substrata. In contrast, offshore wind turbines placed on rocky reefs in highly exposed areas are much less common and the impacts on local flora and fauna can only be hypothesized. On the Western coast of Norway, a rocky reef with a highly complex topography has been chosen to be the first full-scale offshore wind farm in the country. Underwater video analyses and multibeam bathymetry data with a generalized linear model were used opportunistically to investigate the influence of geomorphic explanatory variables on the occurrence of selected taxa (algae, sea urchins and sea stars) identified in the study area. Combining video observations and multibeam bathymetry in a generalized linear model revealed that the geomorphic descriptors: aspect, slope, rugosity, and benthic position indexes (BPI), were of significance for algae, sea urchins and sea stars at Havsul and served in showing their habitat preferences. Kelp occurred in areas of high rugosity, on gentle slopes, at elevated areas with a southerly orientation and on the sheltered side of rock or bedrock. Thus, construction disturbance that modify those variables may lead to a change in the area preferred by kelp. Turbines that shade southerly aspects may affect small kelp plants in reducing their available habitat. Sea urchins were more abundant on steep slopes and both sea stars and sea urchins showed a preference for a complex local relief (high rugosity) and heterogeneity in fine and broad elevation (shown by BPI). Thus, foundations and cable route preparation may significantly change the slope, rugosity of BPI broad, which will change the basis for sea urchin populations. It may likewise significantly change the rugosity or BPI (fine or broad), which may change the distribution of sea stars. The

  6. Developing An Explanatory Prediction Model Based On Rainfall Patterns For Cholera Outbreaks In Africa

    NASA Astrophysics Data System (ADS)

    van der Merwe, M. R.; Du Preez, M.

    2012-12-01

    Cholera has become endemic in coastal and inland areas within the tropics as well as areas outside of the tropics in Africa. Climate conditions and weather patterns differ between areas reporting cholera cases in Africa. Some areas experience two rainfall seasons compared to areas with only one rainfall season in a year. Further, climate variability or ENSO events affect local weather conditions differently. La Niña, i.e. cold events lead to higher than normal rainfall in areas in southern Africa compared to areas close to the equator in eastern Africa which report less than normal rainfall. Time series analysis of cholera cases and rainfall data at different spatial resolutions highlight the overlap of the rainfall season with the reporting of cholera cases. Cholera cases are also reported in between rainy seasons in different areas but the incidence is significantly less compared to the rainy season. An increase in the intensity of outbreaks is also noted during the rainy season following a drier than normal 'dry' season. This necessitates the understanding of the reasons for the observed correlation between rainfall season and cholera outbreaks in order to develop a prediction model which can accurately predict the likelihood of an outbreak. Due to the complexities associated with accurately predicting weather data more than seven days ahead of time it is necessary to identify global drivers with a lagged effect on local rainfall patterns. Climate variability, i.e. ENSO is investigated at different temporal scales; spatial locations and time lags. Sea surface temperature anomalies (SSTa) measured closed to the equator and in the southern parts of the Indian Ocean are more closely associated with rainfall anomalies at specific time lags in equatorial, East African, south East African and central African areas compared to SSTa measured in different regions in the Pacific Ocean. An explanatory prediction model is developed for conditions in Mozambique (coastal

  7. Critical reflections on evolutionary psychology and sexual selection theory as explanatory account of emergence of sex differences in psychopathology: comment on Martel (2013).

    PubMed

    Hankin, Benjamin L

    2013-11-01

    Martel (2013) proposed a metatheory, based on sexual selection theory and broad evolutionary psychological (EP) principles, to account for well-known sex differences in the emergence of common behavioral and certain internalizing disorders across childhood and adolescence, respectively. In this comment, I first enumerate several strengths and then offer 2 primary critiques about Martel's proposal. Martel provides an exceptional, integrative review that organizes several disparate literatures that hold promise to enhance understanding of such sex differences. At the same time, I raise critical questions regarding EP generally, and sexual selection theory specifically, as the metatheoretical framework chosen to bind together these different influences and mechanisms as drivers of the sex difference in different psychopathologies. Indeed, it is not clear that EP is necessary--nor does it provide unique explanatory power-to explicate the emergence of sex differences in internalizing and externalizing disorders among youth. Moreover, Martel's EP-based proposal pertains to adolescent-onset depression and social phobia but does not provide an explanation for known sex differences in other common childhood-onset and early adult-onset anxiety disorders.

  8. Using case study within a sequential explanatory design to evaluate the impact of specialist and advanced practice roles on clinical outcomes: the SCAPE study

    PubMed Central

    2013-01-01

    Background The role of the clinical nurse/midwife specialist and advanced nurse/midwife practitioner is complex not least because of the diversity in how the roles are operationalised across health settings and within multidisciplinary teams. This aim of this paper is to use The SCAPE Study: Specialist Clinical and Advanced Practitioner Evaluation in Ireland to illustrate how case study was used to strengthen a Sequential Explanatory Design. Methods In Phase 1, clinicians identified indicators of specialist and advanced practice which were then used to guide the instrumental case study design which formed the second phase of the larger study. Phase 2 used matched case studies to evaluate the effectiveness of specialist and advanced practitioners on clinical outcomes for service users. Data were collected through observation, documentary analysis, and interviews. Observations were made of 23 Clinical Specialists or Advanced Practitioners, and 23 matched clinicians in similar matched non-postholding sites, while they delivered care. Forty-one service users, 41 clinicians, and 23 Directors of Nursing or Midwifery were interviewed, and 279 service users completed a survey based on the components of CS and AP practice identified in Phase 1. A coding framework, and the generation of cross tabulation matrices in NVivo, was used to make explicit how the outcome measures were confirmed and validated from multiple sources. This strengthened the potential to examine single cases that seemed ‘different’, and allowed for cases to be redefined. Phase 3 involved interviews with policy-makers to set the findings in context. Results Case study is a powerful research strategy to use within sequential explanatory mixed method designs, and adds completeness to the exploration of complex issues in clinical practice. The design is flexible, allowing the use of multiple data collection methods from both qualitative and quantitative paradigms. Conclusions Multiple approaches to data

  9. Influence of Additive and Multiplicative Structure and Direction of Comparison on the Reversal Error

    ERIC Educational Resources Information Center

    González-Calero, José Antonio; Arnau, David; Laserna-Belenguer, Belén

    2015-01-01

    An empirical study has been carried out to evaluate the potential of word order matching and static comparison as explanatory models of reversal error. Data was collected from 214 undergraduate students who translated a set of additive and multiplicative comparisons expressed in Spanish into algebraic language. In these multiplicative comparisons…

  10. Health effects models for nuclear power plant accident consequence analysis. Modification of models resulting from addition of effects of exposure to alpha-emitting radionuclides: Revision 1, Part 2, Scientific bases for health effects models, Addendum 2

    SciTech Connect

    Abrahamson, S.; Bender, M.A.; Boecker, B.B.; Scott, B.R.; Gilbert, E.S.

    1993-05-01

    The Nuclear Regulatory Commission (NRC) has sponsored several studies to identify and quantify, through the use of models, the potential health effects of accidental releases of radionuclides from nuclear power plants. The Reactor Safety Study provided the basis for most of the earlier estimates related to these health effects. Subsequent efforts by NRC-supported groups resulted in improved health effects models that were published in the report entitled {open_quotes}Health Effects Models for Nuclear Power Plant Consequence Analysis{close_quotes}, NUREG/CR-4214, 1985 and revised further in the 1989 report NUREG/CR-4214, Rev. 1, Part 2. The health effects models presented in the 1989 NUREG/CR-4214 report were developed for exposure to low-linear energy transfer (LET) (beta and gamma) radiation based on the best scientific information available at that time. Since the 1989 report was published, two addenda to that report have been prepared to (1) incorporate other scientific information related to low-LET health effects models and (2) extend the models to consider the possible health consequences of the addition of alpha-emitting radionuclides to the exposure source term. The first addendum report, entitled {open_quotes}Health Effects Models for Nuclear Power Plant Accident Consequence Analysis, Modifications of Models Resulting from Recent Reports on Health Effects of Ionizing Radiation, Low LET Radiation, Part 2: Scientific Bases for Health Effects Models,{close_quotes} was published in 1991 as NUREG/CR-4214, Rev. 1, Part 2, Addendum 1. This second addendum addresses the possibility that some fraction of the accident source term from an operating nuclear power plant comprises alpha-emitting radionuclides. Consideration of chronic high-LET exposure from alpha radiation as well as acute and chronic exposure to low-LET beta and gamma radiations is a reasonable extension of the health effects model.

  11. Virtual Experiments Enable Exploring and Challenging Explanatory Mechanisms of Immune-Mediated P450 Down-Regulation

    PubMed Central

    Petersen, Brenden K.; Ropella, Glen E. P.; Hunt, C. Anthony

    2016-01-01

    Hepatic cytochrome P450 levels are down-regulated during inflammatory disease states, which can cause changes in downstream drug metabolism and hepatotoxicity. Long-term, we seek sufficient new insight into P450-regulating mechanisms to correctly anticipate how an individual’s P450 expressions will respond when health and/or therapeutic interventions change. To date, improving explanatory mechanistic insight relies on knowledge gleaned from in vitro, in vivo, and clinical experiments augmented by case reports. We are working to improve that reality by developing means to undertake scientifically useful virtual experiments. So doing requires translating an accepted theory of immune system influence on P450 regulation into a computational model, and then challenging the model via in silico experiments. We build upon two existing agent-based models—an in silico hepatocyte culture and an in silico liver—capable of exploring and challenging concrete mechanistic hypotheses. We instantiate an in silico version of this hypothesis: in response to lipopolysaccharide, Kupffer cells down-regulate hepatic P450 levels via inflammatory cytokines, thus leading to a reduction in metabolic capacity. We achieve multiple in vitro and in vivo validation targets gathered from five wet-lab experiments, including a lipopolysaccharide-cytokine dose-response curve, time-course P450 down-regulation, and changes in several different measures of drug clearance spanning three drugs: acetaminophen, antipyrine, and chlorzoxazone. Along the way to achieving validation targets, various aspects of each model are falsified and subsequently refined. This iterative process of falsification-refinement-validation leads to biomimetic yet parsimonious mechanisms, which can provide explanatory insight into how, where, and when various features are generated. We argue that as models such as these are incrementally improved through multiple rounds of mechanistic falsification and validation, we will

  12. Conveyor belt biomantles: Centripetal bioturbation coupled with erosional downwasting -- an explanatory model

    NASA Astrophysics Data System (ADS)

    Johnson, D. L.; Johnson, D. N.

    2012-12-01

    Science advances on the strength of clarifying and unifying concepts, models, and methodologies that enhance and expand our explanatory paradigms. If valid, such structures allow us to accurately understand and appreciate how the world works. To aid in this task, new term-concepts must sometimes be coined and formalized. To understand certain ubiquitously occurring -- though as yet un-conceptualized -- surface processes that operate non-stop, and assessing their efficacies, is a desirable goal in landscape evolution studies. All near-surface processes are, of course, biological, chemical, and or physical in nature, and many if not most operate in combination. But of this triumvirate, biological processes, both biochemical and biomechanical (bioturbations), are perhaps least understood. Combinations of ubiquitously and semi-continuously occurring poorly understood processes that are both obscure and yet obvious have collectively produced Earth's biomantle. The biomantle occupies the uppermost Pedosphere, is a planet-wide layer, and unique to Earth. It thus functions as the biogenically habitable interface between the Atmosphere, Biosphere, Hydrosphere, and Lithosphere. The biomantle is defined as the organic-bearing bioturbated upper part of soil, including the topsoil, and of subaqueous substrates (lake, stream, ocean floor sediments) where most biota live, operate, move, wriggle, rest, sleep, estivate, seek food, eat, compete, fight, hide, reproduce, die, and assimilate. Its position and function in the uppermost soil layer of the Critical Zone must modulate and mediate much or most of what takes place above and below in ways yet to be established. In an attempt to increase understanding of this complicated biodynamic pedomembrane, and to identify the main processes that produce it, we present an iterative process model that pits ongoing cyclic bioturbation driven constructional processes against ongoing cyclic physically driven destructional processes. More

  13. Power management system

    DOEpatents

    Algrain, Marcelo C.; Johnson, Kris W.; Akasam, Sivaprasad; Hoff, Brian D.

    2007-10-02

    A method of managing power resources for an electrical system of a vehicle may include identifying enabled power sources from among a plurality of power sources in electrical communication with the electrical system and calculating a threshold power value for the enabled power sources. A total power load placed on the electrical system by one or more power consumers may be measured. If the total power load exceeds the threshold power value, then a determination may be made as to whether one or more additional power sources is available from among the plurality of power sources. At least one of the one or more additional power sources may be enabled, if available.

  14. Design of an impact evaluation using a mixed methods model – an explanatory assessment of the effects of results-based financing mechanisms on maternal healthcare services in Malawi

    PubMed Central

    2014-01-01

    quantitative and qualitative elements. Discussion Combining a traditional quasi-experimental controlled pre- and post-test design with an explanatory mixed methods model permits an additional assessment of organizational and behavioral changes affecting complex processes. Through this impact evaluation approach, our design will not only create robust evidence measures for the outcome of interest, but also generate insights on how and why the investigated interventions produce certain intended and unintended effects and allows for a more in-depth evaluation approach. PMID:24751213

  15. Power Transformers: Technical Terminology Bulletin. Terminotech, Vol.2, No. 6.

    ERIC Educational Resources Information Center

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to power transformers. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  16. Transition Metal Diborides as Electrode Material for MHD Direct Power Extraction: High-temperature Oxidation of ZrB2-HfB2 Solid Solution with LaB6 Addition

    NASA Astrophysics Data System (ADS)

    Sitler, Steven; Hill, Cody; Raja, Krishnan S.; Charit, Indrajit

    2016-06-01

    Transition metal borides are being considered for use as potential electrode coating materials in magnetohydrodynamic direct power extraction plants from coal-fired plasma. These electrode materials will be exposed to aggressive service conditions at high temperatures. Therefore, high-temperature oxidation resistance is an important property. Consolidated samples containing an equimolar solid solution of ZrB2-HfB2 with and without the addition of 1.8 mol pct LaB6 were prepared by ball milling of commercial boride material followed by spark plasma sintering. These samples were oxidized at 1773 K (1500 °C) in two different conditions: (1) as-sintered and (2) anodized (10 V in 0.1 M KOH electrolyte). Oxidation studies were carried out in 0.3 × 105 and 0.1 Pa oxygen partial pressures. The anodic oxide layers showed hafnium enrichment on the surface of the samples, whereas the high-temperature oxides showed zirconium enrichment. The anodized samples without LaB6 addition showed about 2.5 times higher oxidation resistance in high-oxygen partial pressures than the as-sintered samples. Addition of LaB6 improved the oxidation resistance in the as-sintered condition by about 30 pct in the high-oxygen partial pressure tests.

  17. Fermi Observations of GRB 090510: A Short-Hard Gamma-ray Burst with an Additional, Hard Power-law Component from 10 keV TO GeV Energies

    NASA Astrophysics Data System (ADS)

    Ackermann, M.; Asano, K.; Atwood, W. B.; Axelsson, M.; Baldini, L.; Ballet, J.; Barbiellini, G.; Baring, M. G.; Bastieri, D.; Bechtol, K.; Bellazzini, R.; Berenji, B.; Bhat, P. N.; Bissaldi, E.; Blandford, R. D.; Bloom, E. D.; Bonamente, E.; Borgland, A. W.; Bouvier, A.; Bregeon, J.; Brez, A.; Briggs, M. S.; Brigida, M.; Bruel, P.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Caraveo, P. A.; Carrigan, S.; Casandjian, J. M.; Cecchi, C.; Çelik, Ö.; Charles, E.; Chiang, J.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Connaughton, V.; Conrad, J.; Dermer, C. D.; de Palma, F.; Dingus, B. L.; Silva, E. do Couto e.; Drell, P. S.; Dubois, R.; Dumora, D.; Farnier, C.; Favuzzi, C.; Fegan, S. J.; Finke, J.; Focke, W. B.; Frailis, M.; Fukazawa, Y.; Fusco, P.; Gargano, F.; Gasparrini, D.; Gehrels, N.; Germani, S.; Giglietto, N.; Giordano, F.; Glanzman, T.; Godfrey, G.; Granot, J.; Grenier, I. A.; Grondin, M.-H.; Grove, J. E.; Guiriec, S.; Hadasch, D.; Harding, A. K.; Hays, E.; Horan, D.; Hughes, R. E.; Jóhannesson, G.; Johnson, W. N.; Kamae, T.; Katagiri, H.; Kataoka, J.; Kawai, N.; Kippen, R. M.; Knödlseder, J.; Kocevski, D.; Kouveliotou, C.; Kuss, M.; Lande, J.; Latronico, L.; Lemoine-Goumard, M.; Llena Garde, M.; Longo, F.; Loparco, F.; Lott, B.; Lovellette, M. N.; Lubrano, P.; Makeev, A.; Mazziotta, M. N.; McEnery, J. E.; McGlynn, S.; Meegan, C.; Mészáros, P.; Michelson, P. F.; Mitthumsiri, W.; Mizuno, T.; Moiseev, A. A.; Monte, C.; Monzani, M. E.; Moretti, E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakajima, H.; Nakamori, T.; Nolan, P. L.; Norris, J. P.; Nuss, E.; Ohno, M.; Ohsugi, T.; Omodei, N.; Orlando, E.; Ormes, J. F.; Ozaki, M.; Paciesas, W. S.; Paneque, D.; Panetta, J. H.; Parent, D.; Pelassa, V.; Pepe, M.; Pesce-Rollins, M.; Piron, F.; Preece, R.; Rainò, S.; Rando, R.; Razzano, M.; Razzaque, S.; Reimer, A.; Ritz, S.; Rodriguez, A. Y.; Roth, M.; Ryde, F.; Sadrozinski, H. F.-W.; Sander, A.; Scargle, J. D.; Schalk, T. L.; Sgrò, C.; Siskind, E. J.; Smith, P. D.; Spandre, G.; Spinelli, P.; Stamatikos, M.; Stecker, F. W.; Strickman, M. S.; Suson, D. J.; Tajima, H.; Takahashi, H.; Takahashi, T.; Tanaka, T.; Thayer, J. B.; Thayer, J. G.; Thompson, D. J.; Tibaldo, L.; Toma, K.; Torres, D. F.; Tosti, G.; Tramacere, A.; Uchiyama, Y.; Uehara, T.; Usher, T. L.; van der Horst, A. J.; Vasileiou, V.; Vilchez, N.; Vitale, V.; von Kienlin, A.; Waite, A. P.; Wang, P.; Wilson-Hodge, C.; Winer, B. L.; Wu, X. F.; Yamazaki, R.; Yang, Z.; Ylinen, T.; Ziegler, M.

    2010-06-01

    We present detailed observations of the bright short-hard gamma-ray burst GRB 090510 made with the Gamma-ray Burst Monitor (GBM) and Large Area Telescope (LAT) on board the Fermi observatory. GRB 090510 is the first burst detected by the LAT that shows strong evidence for a deviation from a Band spectral fitting function during the prompt emission phase. The time-integrated spectrum is fit by the sum of a Band function with E peak = 3.9 ± 0.3 MeV, which is the highest yet measured, and a hard power-law component with photon index -1.62 ± 0.03 that dominates the emission below ≈20 keV and above ≈100 MeV. The onset of the high-energy spectral component appears to be delayed by ~0.1 s with respect to the onset of a component well fit with a single Band function. A faint GBM pulse and a LAT photon are detected 0.5 s before the main pulse. During the prompt phase, the LAT detected a photon with energy 30.5+5.8 -2.6 GeV, the highest ever measured from a short GRB. Observation of this photon sets a minimum bulk outflow Lorentz factor, Γgsim 1200, using simple γγ opacity arguments for this GRB at redshift z = 0.903 and a variability timescale on the order of tens of ms for the ≈100 keV-few MeV flux. Stricter high confidence estimates imply Γ >~ 1000 and still require that the outflows powering short GRBs are at least as highly relativistic as those of long-duration GRBs. Implications of the temporal behavior and power-law shape of the additional component on synchrotron/synchrotron self-Compton, external-shock synchrotron, and hadronic models are considered.

  18. CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Simulation of SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling

    NASA Astrophysics Data System (ADS)

    Gong, Yue-Feng; Song, Zhi-Tang; Ling, Yun; Liu, Yan; Feng, Song-Lin

    2009-11-01

    A three-dimensional finite element model for phase change random access memory (PCRAM) is established for comprehensive electrical and thermal analysis during SET operation. The SET behaviours of the heater addition structure (HS) and the ring-type contact in bottom electrode (RIB) structure are compared with each other. There are two ways to reduce the RESET current, applying a high resistivity interfacial layer and building a new device structure. The simulation results indicate that the variation of SET current with different power reduction ways is little. This study takes the RESET and SET operation current into consideration, showing that the RIB structure PCRAM cell is suitable for future devices with high heat efficiency and high-density, due to its high heat efficiency in RESET operation.

  19. Six-Minute Walk Test for Persons with Mild or Moderate Disability from Multiple Sclerosis: Performance and Explanatory Factors

    PubMed Central

    Fry, Donna K.; Pfalzer, Lucinda A.

    2011-01-01

    ABSTRACT Purpose: The primary purpose of this study was to determine the extent to which health factors, functional measures, and pulmonary impairment explain performance on 6-Minute Walk Test (6MWT) distance in ambulatory persons with multiple sclerosis (MS). Another purpose was to determine the effect of disability and age on 6MWT performance and explanatory factors. Methods: A cross-sectional study design was used to evaluate factors that explain performance on the 6MWT in 64 community-dwelling persons with MS-related disability (Expanded Disability Status Scale [EDSS] 3.8±1.6). Of the 64 participants, 43 (67.2%) exhibited mild disability (EDSS <4.0) and 21 (32.8%) had moderate disability (EDSS 4.0–6.5). A regression analysis compared 6MWT performance to measures of health factors (EDSS, number of medications, number of comorbidities, resting HR, systolic and diastolic blood pressure [BP]); physical performance (functional stair test [FST], sit-to-stand test [SST], static standing balance [BAL], Fatigue Severity Scale [FSS], Activities-specific Balance Confidence [ABC] Scale); and pulmonary function (forced expiratory volume in 1 second [FEV1], forced vital capacity [FVC], maximal voluntary ventilation [MVV], maximal inspiratory pressure [MIP], maximal expiratory pressure [MEP]). Results: EDSS, ABC, FST, SST, BAL, MVV, MIP, and MEP were significantly associated with 6MWT distance after adjusting for age. Multiple step-wise linear regression analysis revealed that ABC, FST, and BAL were significant and independent explanatory factors of 6MWT distance. ABC and FST explained 75% of the variance in 6MWT performance (R2=0.75). Curvilinear regression analysis revealed that the FST is the most significant explanatory factor for 6MWT distance, explaining 79% of the variance (R2=0.79). Conclusions: 6MWT performance in persons with MS was explained by balance confidence (ABC) and stair-climbing ability (FST). The ABC and FST may be practical clinical measures for

  20. 18 CFR 33.10 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 33.10 Section 33.10 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT APPLICATIONS UNDER FEDERAL POWER ACT SECTION...

  1. Explanatory Model to Describe School District Prevalence Rates for Mental Retardation and Learning Disabilities.

    ERIC Educational Resources Information Center

    McDermott, Suzanne

    1994-01-01

    Data reports from South Carolina's 92 independent school districts during 1980-81 were used to calculate prevalence rates of mental retardation and learning disabilities. These prevalence rates were 41.66/1,000 children enrolled for mental retardation and 33.21/1,000 children enrolled for learning disabilities. Additional analysis showed that…

  2. Insight in Psychosis: An Indicator of Severity of Psychosis, an Explanatory Model of Illness, and a Coping Strategy

    PubMed Central

    Jacob, K. S.

    2016-01-01

    Recent studies related to insight, explanatory models (EMs) of illness and their relationship to outcome of psychosis are reviewed. The traditional argument that insight predicts outcome in psychosis is not supported by recent longitudinal data, which has been analyzed using multivariable statistics that adjust for severity and quality of illness. While all cognition will have a neurobiological representation, if “insight” is related to the primary psychotic process, then insight cannot be seen as an independent predictor of outcome but a part of the progression of illness. The evidence suggests insight, like all EMs, is belief which interacts with the trajectory of the person's illness and the local culture to produce a unique understanding of the illness for the particular individual and his/her family. PMID:27335513

  3. [Different explanatory models for addictive behavior in Turkish and German youths in Germany: significance for prevention and treatment].

    PubMed

    Penka, S; Krieg, S; Hunner, Ch; Heinz, A

    2003-07-01

    Due to cultural and social barriers, immigrants seldom frequent centers for information, counseling, and treatment of addictive disorders. We examine cultural differences in the explanatory models of addictive behavior among Turkish and German youths in Germany with statistical devices that map the concepts associated with problems of addiction. Relevant differences were found between the disorder concepts of Turkish and German youth. German but not Turkish youths classified eating disorders among severe addictive disorders and associated them with embarrassment and shame. Concerning substance abuse, German but not Turkish youths clearly differentiated between illegal drug abuse and the abuse of alcohol and nicotine. Nearly half of all Turkish youths rejected central medical concepts such as "physical dependence" or "reduced control of substance intake" as completely inadequate to characterize problems of addictive behavior. Preventive information programs must consider these differences and use concepts that are accepted and clearly associated with addictive behavior by immigrant populations.

  4. Lay Explanatory Models of Depression and Preferred Coping Strategies among Somali Refugees in Norway. A Mixed-Method Study

    PubMed Central

    Markova, Valeria; Sandal, Gro M.

    2016-01-01

    Objective: Refugees are at high risk of experiencing mental health problems due to trauma in their pasts and to acculturation stress as they settle in a new country. To develop efficient health services that meet the needs of refugees from different regions, an understanding is required of how they make sense of and prefer to cope with mental health problems. This study aims to investigate lay explanatory models of depression and preferred coping strategies among Somali refugees in Norway. Methods: The study used a mixed-method design with a vignette describing a moderately depressed person based on ICD-10 criteria. Firstly, a survey study was performed among Somali refugees (n = 101). Respondents were asked to give advice to the vignette character and complete the Cross-Cultural Depression Coping Inventory and the General Help-Seeking Questionnaire. Secondly, focus group interviews (n = 10) were conducted separately with males and females to examine the relationship between the explanatory models of depression and the preferred coping strategies. Results: The participants showed a strong preference for coping with depression by religious practices and reliance on family, friends, and their ethnic/religious community, rather than by seeking professional treatment from public health services (e.g., medical doctors, psychologists). Depressive symptoms were conceptualized as a problem related to cognition (thinking too much) and emotion (sadness), but not to biological mechanisms, and they were thought to result from spiritual possession, stress as a result of social isolation, and/or past trauma. Independently of time in exile, the participants showed a strong identification with their ethnic origin and associated values. Because participants emphasized the need to obey and follow the views of elders, fathers, and spiritual leaders, these authorities seemed to be “gatekeepers” for access to mental health services. Conclusion: The results highlight that mental

  5. Antarctic Meteorite Location and Mapping Project (AMLAMP): Antarctic meteorite location map series explanatory text and user's guide to AMLAMP data

    NASA Technical Reports Server (NTRS)

    Schutt, J.; Fessler, B.; Cassidy, W. A.

    1993-01-01

    This technical report is an update to LPI Technical Report 89-02, which contained data and information that was current to May 1987. Since that time approximately 4000 new meteorites have been collected, mapped, and characterized, mainly from the numerous ice fields in the Allan Hills-David Glacier region, from the Pecora Escarpment and Moulton Escarpment in the Thiel Mountains-Patuxent region, the Wisconsin Range region, and from the Beardmore region. Meteorite location maps for ice fields from these regions have been produced and are available. This report includes explanatory texts for the maps of new areas and provides information on updates of maps of the areas covered in LPI Technical Report 89-02. Sketch maps and description of locales that have been searched and have yielded single or few meteorites are also included. The meteorite listings for all the ice fields have been updated to include any classification changes and new meteorites recovered from ice fields in the Allan Hills-David Glacier region since 1987. The text has been reorganized and minor errors in the original report have been corrected. Computing capabilities have improved immensely since the early days of this project. Current software and hardware allow easy access to data over computer networks. With various commercial software packages, the data can be used many different ways, including database creation, statistics, and mapping. The databases, explanatory texts, and the plotter files used to produce the meteorite location maps are available through a computer network. Information on how to access AMLAMP data, its formats, and ways it can be used are given in the User's Guide to AMLAMP Data section. Meteorite location maps and thematic maps may be ordered from the Lunar and Planetary Institute. Ordering information is given in Appendix A.

  6. A Bayesian additive model for understanding public transport usage in special events.

    PubMed

    Rodrigues, Filipe; Borysov, Stanislav; Ribeiro, Bernardete; Pereira, Francisco

    2016-12-02

    Public special events, like sports games, concerts and festivals are well known to create disruptions in transportation systems, often catching the operators by surprise. Although these are usually planned well in advance, their impact is difficult to predict, even when organisers and transportation operators coordinate. The problem highly increases when several events happen concurrently. To solve these problems, costly processes, heavily reliant on manual search and personal experience, are usual practice in large cities like Singapore, London or Tokyo. This paper presents a Bayesian additive model with Gaussian process components that combines smart card records from public transport with context information about events that is continuously mined from the Web. We develop an efficient approximate inference algorithm using expectation propagation, which allows us to predict the total number of public transportation trips to the special event areas, thereby contributing to a more adaptive transportation system. Furthermore, for multiple concurrent event scenarios, the proposed algorithm is able to disaggregate gross trip counts into their most likely components related to specific events and routine behavior. Using real data from Singapore, we show that the presented model outperforms the best baseline model by up to 26% in R2 and also has explanatory power for its individual components.

  7. Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V

    NASA Astrophysics Data System (ADS)

    Cunningham, Ross; Narra, Sneha P.; Montgomery, Colt; Beuth, Jack; Rollett, A. D.

    2017-01-01

    The porosity observed in additively manufactured (AM) parts is a potential concern for components intended to undergo high-cycle fatigue without post-processing to remove such defects. The morphology of pores can help identify their cause: irregularly shaped lack of fusion or key-holing pores can usually be linked to incorrect processing parameters, while spherical pores suggest trapped gas. Synchrotron-based x-ray microtomography was performed on laser powder-bed AM Ti-6Al-4V samples over a range of processing conditions to investigate the effects of processing parameters on porosity. The process mapping technique was used to control melt pool size. Tomography was also performed on the powder to measure porosity within the powder that may transfer to the parts. As observed previously in experiments with electron beam powder-bed fabrication, significant variations in porosity were found as a function of the processing parameters. A clear connection between processing parameters and resulting porosity formation mechanism was observed in that inadequate melt pool overlap resulted in lack-of-fusion pores whereas excess power density produced keyhole pores.

  8. Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V

    NASA Astrophysics Data System (ADS)

    Cunningham, Ross; Narra, Sneha P.; Montgomery, Colt; Beuth, Jack; Rollett, A. D.

    2017-03-01

    The porosity observed in additively manufactured (AM) parts is a potential concern for components intended to undergo high-cycle fatigue without post-processing to remove such defects. The morphology of pores can help identify their cause: irregularly shaped lack of fusion or key-holing pores can usually be linked to incorrect processing parameters, while spherical pores suggest trapped gas. Synchrotron-based x-ray microtomography was performed on laser powder-bed AM Ti-6Al-4V samples over a range of processing conditions to investigate the effects of processing parameters on porosity. The process mapping technique was used to control melt pool size. Tomography was also performed on the powder to measure porosity within the powder that may transfer to the parts. As observed previously in experiments with electron beam powder-bed fabrication, significant variations in porosity were found as a function of the processing parameters. A clear connection between processing parameters and resulting porosity formation mechanism was observed in that inadequate melt pool overlap resulted in lack-of-fusion pores whereas excess power density produced keyhole pores.

  9. Power system

    DOEpatents

    Hickam, Christopher Dale

    2008-03-18

    A power system includes a prime mover, a transmission, and a fluid coupler having a selectively engageable lockup clutch. The fluid coupler may be drivingly connected between the prime mover and the transmission. Additionally, the power system may include a motor/generator drivingly connected to at least one of the prime mover and the transmission. The power-system may also include power-system controls configured to execute a control method. The control method may include selecting one of a plurality of modes of operation of the power system. Additionally, the control method may include controlling the operating state of the lockup clutch dependent upon the mode of operation selected. The control method may also include controlling the operating state of the motor/generator dependent upon the mode of operation selected.

  10. Unravelling the spirits’ message: a study of help-seeking steps and explanatory models among patients suffering from spirit possession in Uganda

    PubMed Central

    2014-01-01

    As in many cultures, also in Uganda spirit possession is a common idiom of distress associated with traumatic experiences. In the DSM-IV and -5, possession trance disorders can be classified as dissociative disorders. Dissociation in Western countries is associated with complicated, time-consuming and costly therapies. Patients with spirit possession in SW Uganda, however, often report partial or full recovery after treatment by traditional healers. The aim of this study is to explore how the development of symptoms concomitant help-seeking steps, and explanatory models (EM) eventually contributed to healing of patients with spirit possession in SW Uganda. Illness narratives of 119 patients with spirit possession referred by traditional healers were analysed using a mixed-method approach. Treatments of two-thirds of the patients were unsuccessful when first seeking help in the medical sector. Their initially physical symptoms subsequently developed into dissociative possession symptoms. After an average of two help-seeking steps, patients reached a healing place where 99% of them found satisfactory EM and effective healing. During healing sessions, possessing agents were summoned to identify themselves and underlying problems were addressed. Often-mentioned explanations were the following: neglect of rituals and of responsibilities towards relatives and inheritance, the call to become a healer, witchcraft, grief, and land conflicts. The results demonstrate that traditional healing processes of spirit possession can play a role in restoring connections with the supra-, inter-, intra-, and extra-human worlds. It does not always seem necessary to address individual traumatic experiences per se, which is in line with other research in this field. The study leads to additional perspectives on treatment of trauma-related dissociation in Western countries and on developing effective mental health services in low -and middle-income countries. PMID:24940355

  11. Unravelling the spirits' message: a study of help-seeking steps and explanatory models among patients suffering from spirit possession in Uganda.

    PubMed

    van Duijl, Marjolein; Kleijn, Wim; de Jong, Joop

    2014-01-01

    As in many cultures, also in Uganda spirit possession is a common idiom of distress associated with traumatic experiences. In the DSM-IV and -5, possession trance disorders can be classified as dissociative disorders. Dissociation in Western countries is associated with complicated, time-consuming and costly therapies. Patients with spirit possession in SW Uganda, however, often report partial or full recovery after treatment by traditional healers. The aim of this study is to explore how the development of symptoms concomitant help-seeking steps, and explanatory models (EM) eventually contributed to healing of patients with spirit possession in SW Uganda. Illness narratives of 119 patients with spirit possession referred by traditional healers were analysed using a mixed-method approach. Treatments of two-thirds of the patients were unsuccessful when first seeking help in the medical sector. Their initially physical symptoms subsequently developed into dissociative possession symptoms. After an average of two help-seeking steps, patients reached a healing place where 99% of them found satisfactory EM and effective healing. During healing sessions, possessing agents were summoned to identify themselves and underlying problems were addressed. Often-mentioned explanations were the following: neglect of rituals and of responsibilities towards relatives and inheritance, the call to become a healer, witchcraft, grief, and land conflicts. The results demonstrate that traditional healing processes of spirit possession can play a role in restoring connections with the supra-, inter-, intra-, and extra-human worlds. It does not always seem necessary to address individual traumatic experiences per se, which is in line with other research in this field. The study leads to additional perspectives on treatment of trauma-related dissociation in Western countries and on developing effective mental health services in low -and middle-income countries.

  12. Bayesian Fundamentalism or Enlightenment? On the explanatory status and theoretical contributions of Bayesian models of cognition.

    PubMed

    Jones, Matt; Love, Bradley C

    2011-08-01

    The prominence of Bayesian modeling of cognition has increased recently largely because of mathematical advances in specifying and deriving predictions from complex probabilistic models. Much of this research aims to demonstrate that cognitive behavior can be explained from rational principles alone, without recourse to psychological or neurological processes and representations. We note commonalities between this rational approach and other movements in psychology - namely, Behaviorism and evolutionary psychology - that set aside mechanistic explanations or make use of optimality assumptions. Through these comparisons, we identify a number of challenges that limit the rational program's potential contribution to psychological theory. Specifically, rational Bayesian models are significantly unconstrained, both because they are uninformed by a wide range of process-level data and because their assumptions about the environment are generally not grounded in empirical measurement. The psychological implications of most Bayesian models are also unclear. Bayesian inference itself is conceptually trivial, but strong assumptions are often embedded in the hypothesis sets and the approximation algorithms used to derive model predictions, without a clear delineation between psychological commitments and implementational details. Comparing multiple Bayesian models of the same task is rare, as is the realization that many Bayesian models recapitulate existing (mechanistic level) theories. Despite the expressive power of current Bayesian models, we argue they must be developed in conjunction with mechanistic considerations to offer substantive explanations of cognition. We lay out several means for such an integration, which take into account the representations on which Bayesian inference operates, as well as the algorithms and heuristics that carry it out. We argue this unification will better facilitate lasting contributions to psychological theory, avoiding the pitfalls

  13. An Explanatory Mixed-Methods Approach to Tracing "Career Pathways" Policy in Virginia: How School Counselors and Student Demographics Influence Implementation Fidelity

    ERIC Educational Resources Information Center

    Ormsmith, Michael Isaac

    2014-01-01

    This explanatory mixed-methods policy analysis describes how school counselors' thoughts and attitudes contribute to the implementation fidelity of the Academic and Career Plan (ACP) policy in a suburban Virginia school division. A quantitative survey investigated counselor thoughts about the policy, implementation behaviors, and counselor ideas…

  14. Prevalence of nutritional wasting in populations: building explanatory models using secondary data.

    PubMed Central

    Fernandez, Isabel D.; Himes, John H.; de Onis, Mercedes

    2002-01-01

    OBJECTIVE: To understand how social context affects the nutritional status of populations, as reflected by the prevalence of wasting in children under 5 years of age from Africa, Latin America, and Asia; to present a systematic way of building models for wasting prevalence, using a conceptual framework for the determinants of malnutrition; and to examine the feasibility of using readily available data collected over time to build models of wasting prevalence in populations. METHODS: Associations between prevalence of wasting and environmental variables were examined in the three regions. General linear mixed models were fitted using anthropometric survey data for countries within each region. FINDINGS: Low birth weight (LBW), measles incidence, and access to a safe water supply explained 64% of wasting variability in Asia. In Latin America, LBW and survey year explained 38%; in Africa, LBW, survey year, and adult literacy explained 7%. CONCLUSION: LBW emerged as a predictor of wasting prevalence in all three regions. Actions regarding women's rights may have an effect on the nutritional status of children since LBW seems to reflect several aspects of the conditions of women in society. Databases have to be made compatible with each other to facilitate integrated analysis for nutritional research and policy decision-making. In addition, the validity of the variables representing the conceptual framework should be improved. PMID:12075364

  15. A systematic review of explanatory factors of barriers and facilitators to improving asthma management in South Asian children

    PubMed Central

    2014-01-01

    Background South Asian children with asthma are less likely to receive prescriptions and more likely to suffer uncontrolled symptoms and acute asthma admissions compared with White British children. Understanding barriers are therefore vital in addressing health inequalities. We undertook a systematic review identifying explanatory factors for barriers and facilitators to asthma management in South Asian children. South Asians were defined as individuals of Indian, Pakistani or Bangladeshi descent. Methods Data Sources - Medline, HMIC, EMBASE, ASSIA, Web of Science, BNI, CINAHL, PsycINFO, OpenSIGLE, CRD, Scopus, NHS Evidence, Cochrane Library, Campbell Collaboration, RCPCH, ATS, ERS, Asthma UK, Google Scholar & Asthma Guidelines (BTS, GINA, ATS, Monash, NAEPP, Singapore & New Zealand) to August 2013. Inclusion Criteria – Qualitative, quantitative or mixed methods research with primary focus on identifying explanations for barriers and/or facilitators to asthma management in South Asian children aged 0–18 years with diagnosed/suspected asthma and/or carers and/or healthcare professionals. Data Extraction – Three authors independently reviewed, selected & extracted eligible articles with disagreements resolved by research team discussion. Results 15 studies encompassing 25,755 children, 18,483 parents/carers and 239 healthcare professionals were included. Barriers and explanatory factors identified were: 1. Lack of asthma knowledge in families and healthcare professionals. 2. Under-use of preventer medications. 3. Non-acceptance/denial of asthma. 4. Over-reliance on Emergency Department management. 5. Communication problems. 6. Non-adherence to medication. 7. Use of complementary therapies. Little facilitators regarding asthma management were identified. Conclusions Several key issues were identified as likely to be ethnic-specific to South Asian families, rather than a reflection of minority status: impact of parental and professional knowledge and beliefs

  16. Reliability analysis using an exponential power model with bathtub-shaped failure rate function: a Bayes study.

    PubMed

    Shehla, Romana; Khan, Athar Ali

    2016-01-01

    Models with bathtub-shaped hazard function have been widely accepted in the field of reliability and medicine and are particularly useful in reliability related decision making and cost analysis. In this paper, the exponential power model capable of assuming increasing as well as bathtub-shape, is studied. This article makes a Bayesian study of the same model and simultaneously shows how posterior simulations based on Markov chain Monte Carlo algorithms can be straightforward and routine in R. The study is carried out for complete as well as censored data, under the assumption of weakly-informative priors for the parameters. In addition to this, inference interest focuses on the posterior distribution of non-linear functions of the parameters. Also, the model has been extended to include continuous explanatory variables and R-codes are well illustrated. Two real data sets are considered for illustrative purposes.

  17. Dynamic power flow controllers

    DOEpatents

    Divan, Deepakraj M.; Prasai, Anish

    2017-03-07

    Dynamic power flow controllers are provided. A dynamic power flow controller may comprise a transformer and a power converter. The power converter is subject to low voltage stresses and not floated at line voltage. In addition, the power converter is rated at a fraction of the total power controlled. A dynamic power flow controller controls both the real and the reactive power flow between two AC sources having the same frequency. A dynamic power flow controller inserts a voltage with controllable magnitude and phase between two AC sources; thereby effecting control of active and reactive power flows between two AC sources.

  18. Psychometric Properties of the Persian Language Version of Yang Internet Addiction Questionnaire: An Explanatory Factor Analysis

    PubMed Central

    Mohammadsalehi, Narges; Mohammadbeigi, Abolfazl; Jadidi, Rahmatollah; Anbari, Zohreh; Ghaderi, Ebrahim; Akbari, Mojtaba

    2015-01-01

    Background: Reliability and validity are the key concepts in measurement processes. Young internet addiction test (YIAT) is regarded as a valid and reliable questionnaire in English speaking countries for diagnosis of Internet-related behavior disorders. Objectives: This study aimed at validating the Persian version of YIAT in the Iranian society. Patients and Methods: A pilot and a cross-sectional study were conducted on 28 and 254 students of Qom University of Medical Sciences, respectively, in order to validate the Persian version of YIAT. Forward and backward translations were conducted to develop a Persian version of the scale. Reliability was measured by test-retest, Cronbach’s alpha and interclass correlation coefficient (ICC). Face, content and construct validity were approved by the importance score index, content validity ratio (CVR), content validity index (CVI), correlation matrix and factor analysis. The SPSS software was used for data analysis. Results: The Cronbach’s alpha was 0.917 (CI 95%; 0.901 - 0.931). The average of scale-level CVI was calculated to be 0.74; the CVI index for each item was higher than 0.83 and the average of CVI index was equal to 0.89. Factor analysis extracted three factors including personal activities disorder (PAD), emotional and mood disorder (EMD) and social activities disorder (SAD), with more than 55.8% of total variances. The ICC for different factors of Persian version of Young Questionnaire including PAD, EMD and for SAD was r = 0.884; CI 95%; 0.861 - 0.904, r = 0.766; CI 95%; 0.718 - 0.808 and r = 0.745; CI 95%; 0.686 - 0.795, respectively. Conclusions: Our study showed that the Persian version of YIAT is good and usable on Iranian people. The reliability of the instrument was very good. Moreover, the validity of the Persian translated version of the scale was sufficient. In addition, the reliability and validity of the three extracted factors of YIAT were evaluated and were acceptable. PMID:26495253

  19. Pro-anorexia, weight-loss drugs and the internet: an "anti-recovery" explanatory model of anorexia.

    PubMed

    Fox, Nick; Ward, Katie; O'Rourke, Alan

    2005-11-01

    This paper explores the online "pro-anorexia" underground, a movement that supports those with anorexia and adopts an "anti-recovery" perspective on the disease. While encouraging a "healthy" diet to sustain an anorexic way-of-life, the movement also recommends the radical use of weight-loss pharmaceuticals to pursue and maintain low body weight, in contrast to their conventional use to treat obesity. Using ethnographic and interview data collected from participants in the "Anagrrl" website and online forum, we analyse the pro-anorexia (or "pro-ana") movement in terms of its underlying "explanatory model" of the disease, and contrast it with medical, psychosocial, sociocultural and feminist models that encourage a "normalisation" of body shape and weight. We suggest that for participants in pro-ana, anorexia represents stability and control, and Anagrrl offers support and guidance for those who wish to remain in this "sanctuary". We discuss the pro-anorexia movement's use of the internet to facilitate resistance to medical and social theories of disease, and its subversion of pharmaceutical technologies.

  20. Religious Social Identity as an Explanatory Factor for Associations between More Frequent Formal Religious Participation and Psychological Well-Being

    PubMed Central

    Greenfield, Emily A.; Marks, Nadine F.

    2008-01-01

    Guided by social identity theory, this study investigated having a closer identification as a member of one’s religious group as an explanatory mechanism for linkages between more frequent formal religious participation and better subjective psychological well-being (more positive affect, less negative affect, and more life satisfaction). Multivariate regression models were estimated based on data from 3,032 participants, ages 25 to 74, in the 1995 National Survey of Midlife in the U.S. (MIDUS). Results provided support for the mediating effect of religious social identity on the associations between more frequent religious service attendance and all three dimensions of psychological well-being examined. Given the lack of previous empirical attention to social identity within the literature on religiosity and mental health, these findings contribute to our understanding of self, religion, and health, while also pointing to the importance of continuing to draw on well developed social psychological theory in investigations of linkages between religion and health. PMID:18698380

  1. Explanatory model of emotional-cognitive variables in school mathematics performance: a longitudinal study in primary school.

    PubMed

    Cerda, Gamal; Pérez, Carlos; Navarro, José I; Aguilar, Manuel; Casas, José A; Aragón, Estíbaliz

    2015-01-01

    This study tested a structural model of cognitive-emotional explanatory variables to explain performance in mathematics. The predictor variables assessed were related to students' level of development of early mathematical competencies (EMCs), specifically, relational and numerical competencies, predisposition toward mathematics, and the level of logical intelligence in a population of primary school Chilean students (n = 634). This longitudinal study also included the academic performance of the students during a period of 4 years as a variable. The sampled students were initially assessed by means of an Early Numeracy Test, and, subsequently, they were administered a Likert-type scale to measure their predisposition toward mathematics (EPMAT) and a basic test of logical intelligence. The results of these tests were used to analyse the interaction of all the aforementioned variables by means of a structural equations model. This combined interaction model was able to predict 64.3% of the variability of observed performance. Preschool students' performance in EMCs was a strong predictor for achievement in mathematics for students between 8 and 11 years of age. Therefore, this paper highlights the importance of EMCs and the modulating role of predisposition toward mathematics. Also, this paper discusses the educational role of these findings, as well as possible ways to improve negative predispositions toward mathematical tasks in the school domain.

  2. Explanatory model of emotional-cognitive variables in school mathematics performance: a longitudinal study in primary school

    PubMed Central

    Cerda, Gamal; Pérez, Carlos; Navarro, José I.; Aguilar, Manuel; Casas, José A.; Aragón, Estíbaliz

    2015-01-01

    This study tested a structural model of cognitive-emotional explanatory variables to explain performance in mathematics. The predictor variables assessed were related to students’ level of development of early mathematical competencies (EMCs), specifically, relational and numerical competencies, predisposition toward mathematics, and the level of logical intelligence in a population of primary school Chilean students (n = 634). This longitudinal study also included the academic performance of the students during a period of 4 years as a variable. The sampled students were initially assessed by means of an Early Numeracy Test, and, subsequently, they were administered a Likert-type scale to measure their predisposition toward mathematics (EPMAT) and a basic test of logical intelligence. The results of these tests were used to analyse the interaction of all the aforementioned variables by means of a structural equations model. This combined interaction model was able to predict 64.3% of the variability of observed performance. Preschool students’ performance in EMCs was a strong predictor for achievement in mathematics for students between 8 and 11 years of age. Therefore, this paper highlights the importance of EMCs and the modulating role of predisposition toward mathematics. Also, this paper discusses the educational role of these findings, as well as possible ways to improve negative predispositions toward mathematical tasks in the school domain. PMID:26441739

  3. The Health Belief Model as an explanatory framework in communication research: exploring parallel, serial, and moderated mediation.

    PubMed

    Jones, Christina L; Jensen, Jakob D; Scherr, Courtney L; Brown, Natasha R; Christy, Katheryn; Weaver, Jeremy

    2015-01-01

    The Health Belief Model (HBM) posits that messages will achieve optimal behavior change if they successfully target perceived barriers, benefits, self-efficacy, and threat. While the model seems to be an ideal explanatory framework for communication research, theoretical limitations have limited its use in the field. Notably, variable ordering is currently undefined in the HBM. Thus, it is unclear whether constructs mediate relationships comparably (parallel mediation), in sequence (serial mediation), or in tandem with a moderator (moderated mediation). To investigate variable ordering, adults (N = 1,377) completed a survey in the aftermath of an 8-month flu vaccine campaign grounded in the HBM. Exposure to the campaign was positively related to vaccination behavior. Statistical evaluation supported a model where the indirect effect of exposure on behavior through perceived barriers and threat was moderated by self-efficacy (moderated mediation). Perceived barriers and benefits also formed a serial mediation chain. The results indicate that variable ordering in the Health Belief Model may be complex, may help to explain conflicting results of the past, and may be a good focus for future research.

  4. Decision-making and evaluation of science causal claims: Effects of goals on uses of evidence and explanatory mechanism

    NASA Astrophysics Data System (ADS)

    Wong, Jacqueline Yin Sang

    2015-10-01

    Evidence and explanatory mechanism are central to scientific practices. Using such information could also inform decisions about issues in which science can play some role, from policy issues like climate change to personal issues like vaccination. While research suggests that people tend to focus on non-science considerations when making science-related decisions, there is also evidence that people can reason very productively with evidence and mechanism. This study examines how the goals participants pursue when reading a science report influences how they attend to information about causal mechanism and evidence. Two hundred and seventeen high school students were asked either to evaluate the truth of a scientific claim, to make a personal decision based on the claim, or to make a social policy decision based on the claim using an online task-based survey. All three groups of participants attended to evidence and mechanism, but participants with different goals requested different types of information and were influenced by evidence and mechanism for different reasons. The findings suggest that goals influence how participants use evidence and mechanism.

  5. Racial disparities in self-rated health: Trends, explanatory factors, and the changing role of socio-demographics

    PubMed Central

    Beck, Audrey N.; Finch, Brian K.; Lin, Shih-Fan; Hummer, Robert A.; Masters, Ryan K.

    2014-01-01

    This paper uses data from the U.S. National Health Interview Surveys (N = 1,513,097) to describe and explain temporal patterns in black-white health disparities with models that simultaneously consider the unique effects of age, period, and cohort. First, we employ cross-classified random effects age–period–cohort (APC) models to document black-white disparities in self-rated health across temporal dimensions. Second, we use decomposition techniques to shed light on the extent to which socio-economic shifts in cohort composition explain the age and period adjusted racial health disparities across successive birth cohorts. Third, we examine the extent to which exogenous conditions at the time of birth help explain the racial disparities across successive cohorts. Results show that black-white disparities are wider among the pre-1935 cohorts for women, falling thereafter; disparities for men exhibit a similar pattern but exhibit narrowing among cohorts born earlier in the century. Differences in socioeconomic composition consistently contribute to racial health disparities across cohorts; notably, marital status differences by race emerge as an increasingly important explanatory factor in more recent cohorts for women whereas employment differences by race emerge as increasingly salient in more recent cohorts for men. Finally, our cohort characteristics models suggest that cohort economic conditions at the time of birth (percent large family, farm or Southern birth) help explain racial disparities in health for both men and women. PMID:24581075

  6. Influence of explanatory and confounding variables on HRQoL after controlling for measurement bias and response shift in measurement.

    PubMed

    Gandhi, Pranav K; Ried, L Douglas; Kimberlin, Carole L; Kauf, Teresa L; Huang, I-Chan

    2013-12-01

    The purpose of this study was to examine the influence of explanatory and confounding variables on health-related quality of life after accounting for response shift, measurement bias and response shift in measurement using structural equation modeling. Hypertensive patients with coronary artery disease randomized to anti-hypertensive treatment, completed the ShortForm-36 questionnaire at both baseline and 1 year (n = 788). Three measurement biases were found and all three were considered as response shift in measurement. Older patients reported worse scores for both physical functioning (PF) and role-physical at baseline and 1 year later compared to younger patients; and males reported better PF than females after conditioning on the latent trait of general physical health. Before controlling for response shift, patients' PF scores were not statistically different over time; however, PF scores significantly improved (p < 0.01) after controlling for recalibration response shift. Assessment of how patients perceive their change in health-related quality of life over time is warranted.

  7. Marital conflict in early childhood and adolescent disordered eating: emotional insecurity about the marital relationship as an explanatory mechanism.

    PubMed

    George, Melissa W; Fairchild, Amanda J; Mark Cummings, E; Davies, Patrick T

    2014-12-01

    Disordered eating behaviors, including frequent dieting, unhealthy weight control behaviors (e.g., vomiting and skipping meals for weight loss) and binge eating are prevalent among adolescents. While negative, conflict-ridden family environments have long been implicated as problematic and a contributing factor to the development of disordered eating, few studies have examined the influence of marital conflict exposure in childhood to understand the development of these behaviors in adolescence. The current study investigates the impact of marital conflict, children's emotional insecurity about the marital relationship, and disordered eating behaviors in early adolescence in a prospective, longitudinal study of a community sample of 236 families in Midwest and Northeast regions of the U.S. Full structural mediation analyses utilizing robust latent constructs of marital conflict and emotional insecurity about the marital relationship, support children's emotional insecurity as an explanatory mechanism for the influence of marital conflict on adolescent disordered eating behaviors. Findings are discussed with important implications for the long-term impact of marital conflict and the development of disordered eating in adolescence.

  8. The symmetry rule: a seven-year study of symptoms and explanatory labels among Gulf War veterans.

    PubMed

    Brewer, Noel T; Hallman, William K; Kipen, Howard M

    2008-12-01

    Noticing medical symptoms can cause one to search for explanatory labels such as "ate bad food" or even "exposed to anthrax," and perhaps these labels may cause new symptom reports. The present study examined whether there is empirical support for this symptom-label "symmetry rule." We interviewed veterans (N= 362) from the Gulf War Registry in 1995 and 2002 about their medical symptoms and about their exposure to war-related hazards and stressors. Health symptom reports were strongly correlated between the two time periods and showed relatively stable mean levels, whereas recall of war-related exposures was notably unstable. Veterans starting with fewer medical symptoms recalled fewer war-related exposures seven years later. Initial recollection of chemical and biological warfare exposure (but not other exposures) longitudinally predicted novel medical symptoms. The findings generally support the symmetry rule hypotheses, although the evidence for the label to symptom link was less strong. The findings account for some variability in symptoms and exposure recall over time, but they do not, on their own, account for the Gulf War veterans' elevated number of unexplained medical symptoms.

  9. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS §...

  10. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS §...

  11. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS §...

  12. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS §...

  13. 18 CFR 5.21 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Additional information. 5.21 Section 5.21 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS §...

  14. Explaining additional genetic variation in complex traits

    PubMed Central

    Robinson, Matthew R.; Wray, Naomi R.; Visscher, Peter M.

    2015-01-01

    Genome-wide association studies (GWAS) have provided valuable insights into the genetic basis of complex traits, discovering >6000 variants associated with >500 quantitative traits and common complex diseases in humans. The associations identified so far represent only a fraction of those which influence phenotype, as there are likely to be very many variants across the entire frequency spectrum, each of which influences multiple traits, with only a small average contribution to the phenotypic variance. This presents a considerable challenge to further dissection of the remaining unexplained genetic variance within populations, which limits our ability to predict disease risk, identify new drug targets, improve and maintain food sources, and understand natural diversity. This challenge will be met within the current framework through larger sample size, better phenotyping including recording of non-genetic risk factors, focused study designs, and an integration of multiple sources of phenotypic and genetic information. The current evidence supports the application of quantitative genetic approaches, and we argue that one should retain simpler theories until simplicity can be traded for greater explanatory power. PMID:24629526

  15. Barriers to Advance Care Planning at the End of Life: An Explanatory Systematic Review of Implementation Studies

    PubMed Central

    Lund, Susi; Richardson, Alison; May, Carl

    2015-01-01

    Context Advance Care Plans (ACPs) enable patients to discuss and negotiate their preferences for the future including treatment options at the end of life. Their implementation poses significant challenges. Objective To investigate barriers and facilitators to the implementation of ACPs, focusing on their workability and integration in clinical practice. Design An explanatory systematic review of qualitative implementation studies. Data sources Empirical studies that reported interventions designed to support ACP in healthcare. Web of Knowledge, Ovid MEDLINE, CINAHL, PsycINFO, British Nursing Index and PubMed databases were searched. Methods Direct content analysis, using Normalization Process Theory, to identify and characterise relevant components of implementation processes. Results 13 papers identified from 166 abstracts were included in the review. Key factors facilitating implementation were: specially prepared staff utilizing a structured approach to interactions around ACPs. Barriers to implementation were competing demands of other work, the emotional and interactional nature of patient-professional interactions around ACPs, problems in sharing decisions and preferences within and between healthcare organizations. Conclusions This review demonstrates that doing more of the things that facilitate delivery of ACPs will not reduce the effects of those things that undermine them. Structured tools are only likely to be partially effective and the creation of a specialist cadre of ACP facilitators is unlikely to be a sustainable solution. The findings underscore both the challenge and need to find ways to routinely incorporate ACPs in clinical settings where multiple and competing demands impact on practice. Interventions most likely to meet with success are those that make elements of Advance Care Planning workable within complex and time pressured clinical workflows. PMID:25679395

  16. How well can body size represent effects of the environment on demographic rates? Disentangling correlated explanatory variables.

    PubMed

    Brooks, Mollie E; Mugabo, Marianne; Rodgers, Gwendolen M; Benton, Timothy G; Ozgul, Arpat

    2016-03-01

    Demographic rates are shaped by the interaction of past and current environments that individuals in a population experience. Past environments shape individual states via selection and plasticity, and fitness-related traits (e.g. individual size) are commonly used in demographic analyses to represent the effect of past environments on demographic rates. We quantified how well the size of individuals captures the effects of a population's past and current environments on demographic rates in a well-studied experimental system of soil mites. We decomposed these interrelated sources of variation with a novel method of multiple regression that is useful for understanding nonlinear relationships between responses and multicollinear explanatory variables. We graphically present the results using area-proportional Venn diagrams. Our novel method was developed by combining existing methods and expanding upon them. We showed that the strength of size as a proxy for the past environment varied widely among vital rates. For instance, in this organism with an income breeding life history, the environment had more effect on reproduction than individual size, but with substantial overlap indicating that size encompassed some of the effects of the past environment on fecundity. This demonstrates that the strength of size as a proxy for the past environment can vary widely among life-history processes within a species, and this variation should be taken into consideration in trait-based demographic or individual-based approaches that focus on phenotypic traits as state variables. Furthermore, the strength of a proxy will depend on what state variable(s) and what demographic rate is being examined; that is, different measures of body size (e.g. length, volume, mass, fat stores) will be better or worse proxies for various life-history processes.

  17. Technogeopologistics: Supply Networks and Military Power in the Industrial Age

    DTIC Science & Technology

    2012-06-01

    the category of what modern technology scholars call hard determinism. According to Leo Marx and Merritt Smith, from a hard deterministic view...the German side, a more interesting argument arises. In the first two categories , Germany lacks considerably when compared to Britain. Its coastline...the history of the world? Mahan’s last two categories , population and government, have some explanatory power. Mahan in his section on population

  18. Additive Manufacturing Integrated Energy Demonstration

    SciTech Connect

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-02-05

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  19. Additive Manufacturing Integrated Energy Demonstration

    ScienceCinema

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-07-12

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  20. Computing aspects of power for multiple regression.

    PubMed

    Dunlap, William P; Xin, Xue; Myers, Leann

    2004-11-01

    Rules of thumb for power in multiple regression research abound. Most such rules dictate the necessary sample size, but they are based only upon the number of predictor variables, usually ignoring other critical factors necessary to compute power accurately. Other guides to power in multiple regression typically use approximate rather than precise equations for the underlying distribution; entail complex preparatory computations; require interpolation with tabular presentation formats; run only under software such as Mathmatica or SAS that may not be immediately available to the user; or are sold to the user as parts of power computation packages. In contrast, the program we offer herein is immediately downloadable at no charge, runs under Windows, is interactive, self-explanatory, flexible to fit the user's own regression problems, and is as accurate as single precision computation ordinarily permits.

  1. NOAA OTEC CWP (National Oceanic and Atmospheric Administration Ocean Thermal Energy Conversion Cold Water Pipe) at-sea test. Volume 3: Additional tabulation of the power spectra, part 2

    NASA Astrophysics Data System (ADS)

    1983-12-01

    Data collected during the Ocean Thermal Energy Conversion (OTEC) Cold Water Pipe At Sea Test are analyzed. Also included are the following ittems: (1) sensor factors and offsets, and the data processing algorithms used to convert the recorded sensor measurements from electrical to engineering units; (2) plots of the power spectra estimates obtained from a fast fourier transform (FFT) analysis of selected channels; (3) plots of selected sensor measurements as a function of time; and (4) plots of bending strain along the pipe using statistics and values presented.

  2. In Defence of International Comparative Studies. on the Analytical and Explanatory Power of the Nation State in International Comparative Higher Education Research

    ERIC Educational Resources Information Center

    Kosmützky, Anna

    2015-01-01

    Higher education is undergoing a process of globalization and new realities of a globalized higher education world are emerging. Globalization also has a profound impact on higher education research. Global and transnational topics are theoretically and empirically elaborated and seem on the rise, whereas the international comparative outlook…

  3. Theory development in health care informatics: Information and communication technology acceptance model (ICTAM) improves the explanatory and predictive power of technology acceptance models.

    PubMed

    An, Ji-Young

    2006-01-01

    The purpose of this web-based study was to explain and predict consumers' acceptance and usage behavior of Internet health information and services. Toward this goal, the Information and Communication Technology Acceptance Model (ICTAM) was developed and tested. Individuals who received a flyer through the LISTSERV of HealthGuide were eligible to participate. The study population was eighteen years old and older who had used Internet health information and services for a minimum of 6 months. For the analyses, SPSS (version 13.0) and AMOS (version 5.0) were employed. More than half of the respondents were women (n = 110, 55%). The average age of the respondents was 35.16 years (S.D. = 10.07). A majority reported at least some college education (n = 126, 63%). All of the observed factors accounted for 75.53% of the total variance explained. The fit indices of the structural model were within an acceptable range: chi2/df = 2.38 (chi2 = 1786.31, df = 752); GFI = .71; RMSEA = .08; CFI = .86; NFI = .78. The results of this study provide empirical support for the continued development of ICTAM in the area of health consumers' information and communication technology acceptance.

  4. Conductivity scaling in supercritical percolation of nanoparticles--not a power law.

    PubMed

    Li, Jiantong; Östling, Mikael

    2015-02-28

    The power-law behavior widely observed in supercritical percolation systems of conductive nanoparticles may merely be a phenomenological approximation to the true scaling law not yet discovered. In this work, we derive a comprehensive yet simple scaling law and verify its extensive applicability to various experimental and numerical systems. In contrast to the power law which lacks theoretical backing, the new scaling law is explanatory and predictive, and thereby helpful to gain more new insights into percolation systems of conductive nanoparticles.

  5. Additive Similarity Trees

    ERIC Educational Resources Information Center

    Sattath, Shmuel; Tversky, Amos

    1977-01-01

    Tree representations of similarity data are investigated. Hierarchical clustering is critically examined, and a more general procedure, called the additive tree, is presented. The additive tree representation is then compared to multidimensional scaling. (Author/JKS)

  6. Making sense of illness: late-in-life migration as point of departure for elderly Iranian immigrants' explanatory models of illness.

    PubMed

    Emami, Azita; Torres, Sandra

    2005-07-01

    This article is based on data gathered through 60 qualitative interviews conducted within the realm of three research projects that have used "culture-appropriate lenses" to study the postmigration situation of late-in-life Iranian immigrants to Sweden. The findings gathered through these studies were interpreted against the backdrop that culturally appropriate nursing theories provide. This meant that it was, at times, these elders' backgrounds as cultural "others" that were implicitly used to make sense of the various issues that were brought to the fore by these studies. The particular issue with which this article is concerned is the "unusualness" of these elders' explanatory models of illness. Inspired by the concept "definition of situation" in the symbolic interactionist perspective and by the feeling that this perspective might bring about a different interpretation of the original findings regarding their understandings of illness and disease, we set out to conduct a secondary analysis of these elders' explanatory models of illness. The findings presented in this article will show how the elderly Iranian immigrants interviewed in these three studies utilize the process of "late in life migration" as a point of reference for their understandings of what has caused the illnesses from which they suffered. Hereby we will suggest that the "unusualness" of their explanatory models of illness might be best understood if we focus on what they shared as immigrants (i.e., the fact that the process of late-in-life migration has made their culture obsolete) as opposed to what they shared as Iranians (i.e., their culture of origin).

  7. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  8. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  9. Power quality load management for large spacecraft electrical power systems

    NASA Technical Reports Server (NTRS)

    Lollar, Louis F.

    1988-01-01

    In December, 1986, a Center Director's Discretionary Fund (CDDF) proposal was granted to study power system control techniques in large space electrical power systems. Presented are the accomplishments in the area of power system control by power quality load management. In addition, information concerning the distortion problems in a 20 kHz ac power system is presented.

  10. Liquid chromatography coupled to different atmospheric pressure ionization sources-quadrupole-time-of-flight mass spectrometry and post-column addition of metal salt solutions as a powerful tool for the metabolic profiling of Fusarium oxysporum.

    PubMed

    Cirigliano, Adriana M; Rodriguez, M Alejandra; Gagliano, M Laura; Bertinetti, Brenda V; Godeas, Alicia M; Cabrera, Gabriela M

    2016-03-25

    Fusarium oxysporum L11 is a non-pathogenic soil-borne fungal strain that yielded an extract that showed antifungal activity against phytopathogens. In this study, reversed-phase high-performance liquid chromatography (RP-HPLC) coupled to different atmospheric pressure ionization sources-quadrupole-time-of-flight mass spectrometry (API-QTOF-MS) was applied for the comprehensive profiling of the metabolites from the extract. The employed sources were electrospray (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI). Post-column addition of metal solutions of Ca, Cu and Zn(II) was also tested using ESI. A total of 137 compounds were identified or tentatively identified by matching their accurate mass signals, suggested molecular formulae and MS/MS analysis with previously reported data. Some compounds were isolated and identified by NMR. The extract was rich in cyclic peptides like cyclosporins, diketopiperazines and sansalvamides, most of which were new, and are reported here for the first time. The use of post-column addition of metals resulted in a useful strategy for the discrimination of compound classes since specific adducts were observed for the different compound families. This technique also allowed the screening for compounds with metal binding properties. Thus, the applied methodology is a useful choice for the metabolic profiling of extracts and also for the selection of metabolites with potential biological activities related to interactions with metal ions.

  11. Using Qualitative Methods to Explore Lay Explanatory Models, Health-Seeking Behaviours and Self-Care Practices of Podoconiosis Patients in North-West Ethiopia

    PubMed Central

    Banks, Harrison S.; Tsegay, Girmay; Wubie, Moges; Tamiru, Abreham; Davey, Gail; Cooper, Max

    2016-01-01

    Background Podoconiosis (endemic non-filarial elephantiasis) is a chronic, non-infectious disease resulting from exposure of bare feet to red-clay soil in tropical highlands. This study examined lay beliefs about three under-researched aspects of podoconiosis patients’ care: explanatory models, health-seeking behaviours and self-care. Methods In-depth interviews and focus group discussions were undertaken with 34 participants (19 male, 15 female) between April-May 2015 at podoconiosis treatment centres across East and West Gojjam regions in north-west Ethiopia. Results Explanatory models for podoconiosis included contamination from blood, magic, soil or affected individuals. Belief in heredity or divine punishment often delayed clinic attendance. All participants had tried holy water treatment and some, holy soil. Herbal treatments were considered ineffectual, costly and appeared to promote fluid escape. Motivators for clinic attendance were failure of traditional treatments and severe or disabling symptoms. Patients did not report self-treatment with antibiotics. Self-care was hindered by water being unavailable or expensive and patient fatigue. Conclusion A pluralistic approach to podoconiosis self-treatment was discovered. Holy water is widely valued, though some patients prefer holy soil. Priests and traditional healers could help promote self-care and “signpost” patients to clinics. Change in behaviour and improving water access is key to self-care. PMID:27536772

  12. Multi-heat addition turbine engine

    NASA Technical Reports Server (NTRS)

    Franciscus, Leo C. (Inventor); Brabbs, Theodore A. (Inventor)

    1993-01-01

    A multi-heat addition turbine engine (MHATE) incorporates a plurality of heat addition devices to transfer energy to air and a plurality of turbines to extract energy from the air while converting it to work. The MHATE provides dry power and lower fuel consumption or lower combustor exit temperatures.

  13. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

  14. Additive Manufactured Product Integrity

    NASA Technical Reports Server (NTRS)

    Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

    2017-01-01

    NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

  15. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  16. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  17. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  18. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  19. Group Sparse Additive Models

    PubMed Central

    Yin, Junming; Chen, Xi; Xing, Eric P.

    2016-01-01

    We consider the problem of sparse variable selection in nonparametric additive models, with the prior knowledge of the structure among the covariates to encourage those variables within a group to be selected jointly. Previous works either study the group sparsity in the parametric setting (e.g., group lasso), or address the problem in the nonparametric setting without exploiting the structural information (e.g., sparse additive models). In this paper, we present a new method, called group sparse additive models (GroupSpAM), which can handle group sparsity in additive models. We generalize the ℓ1/ℓ2 norm to Hilbert spaces as the sparsity-inducing penalty in GroupSpAM. Moreover, we derive a novel thresholding condition for identifying the functional sparsity at the group level, and propose an efficient block coordinate descent algorithm for constructing the estimate. We demonstrate by simulation that GroupSpAM substantially outperforms the competing methods in terms of support recovery and prediction accuracy in additive models, and also conduct a comparative experiment on a real breast cancer dataset.

  20. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  1. Chance: from metaphysical principle to explanatory concept. The idea of uncertainty in a natural history of knowledge.

    PubMed

    Morizot, Baptiste

    2012-09-01

    The term "chance" has been given varied and different meanings in the history of occidental thought, carrying metaphysical connotations and controversial power. Despite the obscurity implied by this polysemy, this term is still frequently used without undergoing the conceptual clarifications that could locate its precise meaning and its original function in a theory. Here I propose a brief genealogical draft of this term and of its conceptual forms, from Aristotle to Darwin, to demonstrate the necessity of specifying what function it is fulfilling in each precise theoretical framework, in order not to be overwhelmed by the wide spectrum of the word.

  2. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  3. Fused Lasso Additive Model

    PubMed Central

    Petersen, Ashley; Witten, Daniela; Simon, Noah

    2016-01-01

    We consider the problem of predicting an outcome variable using p covariates that are measured on n independent observations, in a setting in which additive, flexible, and interpretable fits are desired. We propose the fused lasso additive model (FLAM), in which each additive function is estimated to be piecewise constant with a small number of adaptively-chosen knots. FLAM is the solution to a convex optimization problem, for which a simple algorithm with guaranteed convergence to a global optimum is provided. FLAM is shown to be consistent in high dimensions, and an unbiased estimator of its degrees of freedom is proposed. We evaluate the performance of FLAM in a simulation study and on two data sets. Supplemental materials are available online, and the R package flam is available on CRAN. PMID:28239246

  4. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  5. Power laws and fragility in flow networks☆

    PubMed Central

    Shore, Jesse; Chu, Catherine J.; Bianchi, Matt T.

    2015-01-01

    What makes economic and ecological networks so unlike other highly skewed networks in their tendency toward turbulence and collapse? Here, we explore the consequences of a defining feature of these networks: their nodes are tied together by flow. We show that flow networks tend to the power law degree distribution (PLDD) due to a self-reinforcing process involving position within the global network structure, and thus present the first random graph model for PLDDs that does not depend on a rich-get-richer function of nodal degree. We also show that in contrast to non-flow networks, PLDD flow networks are dramatically more vulnerable to catastrophic failure than non-PLDD flow networks, a finding with potential explanatory power in our age of resource- and financial-interdependence and turbulence. PMID:26082568

  6. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  7. Additives in plastics.

    PubMed

    Deanin, R D

    1975-06-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products.

  8. The role of mass media in adolescents' sexual behaviors: exploring the explanatory value of the three-step self-objectification process.

    PubMed

    Vandenbosch, Laura; Eggermont, Steven

    2015-04-01

    This longitudinal study (N = 730) explored whether the three-step process of self-objectification (internalization of appearance ideals, valuing appearance over competence, and body surveillance) could explain the influence of sexual media messages on adolescents' sexual behaviors. A structural equation model showed that reading sexualizing magazines (Time 1) was related to the internalization of appearance ideals and valuing appearance over competence (Time 2). In turn, the internalization of appearance ideals was positively associated with body surveillance and valuing appearance over competence (all at Time 2). Valuing appearance over competence was also positively associated with body surveillance (all at Time 2). Lastly, body surveillance (Time 2) positively related to the initiation of French kissing (Time 3) whereas valuing appearance over competence (Time 2) positively related to the initiation of sexual intercourse (Time 3). No significant relationship was observed for intimate touching. The discussion focused on the explanatory role of self-objectification in media effects on adolescents' sexual behaviors.

  9. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  10. More Than Additional Space...

    ERIC Educational Resources Information Center

    CEFP Journal, 1973

    1973-01-01

    A much needed addition to the Jamestown Elementary School turned out to be more than an expansion of walls for more space. A new educational program, a limited budget, and a short time line were tackled on a team approach basis and were successfully resolved. (Author)

  11. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder.

  12. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  13. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  14. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  15. Power electronics for low power arcjets

    NASA Technical Reports Server (NTRS)

    Hamley, John A.; Hill, Gerald M.

    1991-01-01

    In anticipation of the needs of future light-weight, low-power spacecraft, arcjet power electronics in the 100 to 400 W operating range were developed. Limited spacecraft power and thermal control capacity of these small spacecraft emphasized the need for high efficiency. Power topologies similar to those in the higher 2 kW and 5 to 30 kW power range were implemented, including a four transistor bridge switching circuit, current mode pulse-width modulated control, and an output current averaging inductor with an integral pulse generation winding. Reduction of switching transients was accomplished using a low inductance power distribution network, and no passive snubber circuits were necessary for power switch protection. Phase shift control of the power bridge was accomplished using an improved pulse width modulation to phase shift converter circuit. These features, along with conservative magnetics designs allowed power conversion efficiencies of greater than 92.5 percent to be achieved into resistive loads over the entire operating range of the converter. Electromagnetic compatibility requirements were not considered in this work, and control power for the converter was derived from AC mains. Addition of input filters and control power converters would result in an efficiency of on the order of 90 percent for a flight unit. Due to the developmental nature of arcjet systems at this power level, the exact nature of the thruster/power processor interface was not quantified. Output regulation and current ripple requirements of 1 and 20 percent respectively, as well as starting techniques, were derived from the characteristics of the 2 kW system but an open circuit voltage in excess of 175 V was specified. Arcjet integration tests were performed, resulting in successful starts and stable arcjet operation at power levels as low as 240 W with simulated hydrazine propellants.

  16. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  17. Platelet additive solution - electrolytes.

    PubMed

    Azuma, Hiroshi; Hirayama, Junichi; Akino, Mitsuaki; Ikeda, Hisami

    2011-06-01

    Recent attention to solutions that replace most or all plasma in platelet concentrates, while maintaining satisfactory platelet function, is motivated by the potential of plasma reduction or depletion to mitigate various transfusion-related adverse events. This report considers the electrolytic composition of previously described platelet additive solutions, in order to draw general conclusions about what is required for platelet function and longevity. The optimal concentrations of Na(+) and Cl(-) are 69-115 mM. The presence of both K(+) and Mg(2+) in platelet suspension at nearly physiological concentrations (3-5mM and 1.5-3mM, respectively) is indispensable for good preservation capacity because both electrolytes are required to prevent platelet activation. In contrast to K(+) and Mg(2+), Ca(2+) may not be important because no free Ca(2+) is available in M-sol, which showed excellent platelet preservation capacity at less than 5% plasma concentration. The importance of bicarbonate (approximately 40 mM) can be recognized when the platelets are suspended in additive solution under less than 5% residual plasma concentration.

  18. Auxiliary power unit for moving a vehicle

    DOEpatents

    Akasam, Sivaprasad; Johnson, Kris W.; Johnson, Matthew D.; Slone, Larry M.; Welter, James Milton

    2009-02-03

    A power system is provided having at least one traction device and a primary power source configured to power the at least one traction device. In addition, the power system includes an auxiliary power source also configured to power the at least one traction device.

  19. Electric power annual 1993

    SciTech Connect

    Not Available

    1994-12-08

    This report presents a summary of electric power industry statistics at national, regional, and state levels: generating capability and additions, net generation, fossil-fuel statistics, retail sales and revenue, finanical statistics, environmental statistics, power transactions, demand side management, nonutility power producers. Purpose is to provide industry decisionmakers, government policymakers, analysts, and the public with historical data that may be used in understanding US electricity markets.

  20. “Excessive Thinking” as Explanatory Model for Schizophrenia: Impacts on Stigma and “Moral” Status in Mainland China

    PubMed Central

    Yang, Lawrence H.; Phillips, Michael R.; Lo, Graciete; Chou, Yuwen; Zhang, Xiaoli; Hopper, Kim

    2010-01-01

    Although psychiatric stigma in China is particularly pervasive and damaging, rates of high expressed emotion (“EE” or family members' emotional attitudes that predict relapse) are generally lower than rates found in Western countries. In light of this seemingly incongruous juxtaposition and because Chinese comprise approximately one-fifth of the world's mentally ill, we examine how one of the most widely held causal beliefs of schizophrenia—excessive thinking (xiang tai duo)—may powerfully shape how those exhibiting psychotic symptoms pass from “normal” status to stigmatized “other.” Using a framework by which stigma threatens an actor's capacity to participate in core everyday engagements, we examine how expressions of excessive thinking intersect with psychotic symptoms and how this idiom reduces stigma by preserving essential moral standing. Four focus groups with family members (n = 34 total) of schizophrenia outpatients, who had participated in psychoeducation, were conducted in Beijing. Open coding was conducted by 2 bilingual coders achieving high interrater agreement. Common expressions of excessive thinking—taking things too hard that is perceived as a causal factor and unwarranted suspicion that is used to benignly interpret paranoid symptoms encapsulated disruptive behaviors that closely overlapped with psychotic symptoms. Because excessive thinking is understood to occur universally, this idiom encourages socially accommodating behavior that signifies acceptance of these individuals as full-status community members. In contrast, due to beliefs implying moral contamination, those labeled mentally ill are threatened with both subtle and outright social exclusion. We discuss implications of this idiom for EE and the detection of schizophrenia “prodrome” in China. PMID:19193742

  1. Additive composition, for gasoline

    SciTech Connect

    Vataru, M.

    1989-01-10

    An admixture is described that comprises Diesel fuel and an additive composition added thereto which is between about 0.05 to about 2.0 percent by weight of the fuel, the composition comprising: (a) between about 0.05 and 25% relative weight parts of an organic peroxide, and (b) between about 0.1 and 25% relative weight parts of detergent selected from the component group that consists of: (i) fatty amines; (ii) ethoxylated and propoxylated derivatives of fatty amines; (iii) fatty diamines; (iv) fatty imidazlines; (v) polymeric amines and derivatives thereof; (vi) combination of one or more of the (i) through (v) components with carboxylic acid or acids having from three to forth carbon atoms, (c) from about 99.0 to about 50% by weight of a hydrocarbon solvent.

  2. Teardrop bladder: additional considerations

    SciTech Connect

    Wechsler, R.J.; Brennan, R.E.

    1982-07-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB.

  3. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  4. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  5. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  6. 18 CFR 154.400 - Additional requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., DEPARTMENT OF ENERGY REGULATIONS UNDER NATURAL GAS ACT RATE SCHEDULES AND TARIFFS Limited Rate Changes § 154... proposal to implement a limited rate change must comply with this subpart. ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional...

  7. Community norms, enforcement of minimum legal drinking age laws, personal beliefs and underage drinking: an explanatory model.

    PubMed

    Lipperman-Kreda, Sharon; Grube, Joel W; Paschall, Mallie J

    2010-06-01

    Strategies to enforce underage drinking laws are aimed at reducing youth access to alcohol from commercial and social sources and deterring its possession and use. However, little is known about the processes through which enforcement strategies may affect underage drinking. The purpose of the current study is to present and test a conceptual model that specifies possible direct and indirect relationships among adolescents' perception of community alcohol norms, enforcement of underage drinking laws, personal beliefs (perceived parental disapproval of alcohol use, perceived alcohol availability, perceived drinking by peers, perceived harm and personal disapproval of alcohol use), and their past-30-day alcohol use. This study used data from 17,830 middle and high school students who participated in the 2007 Oregon Health Teens Survey. Structural equations modeling indicated that perceived community disapproval of adolescents' alcohol use was directly and positively related to perceived local police enforcement of underage drinking laws. In addition, adolescents' personal beliefs appeared to mediate the relationship between perceived enforcement of underage drinking laws and past-30-day alcohol use. Enforcement of underage drinking laws appeared to partially mediate the relationship between perceived community disapproval and personal beliefs related to alcohol use. Results of this study suggests that environmental prevention efforts to reduce underage drinking should target adults' attitudes and community norms about underage drinking as well as the beliefs of youth themselves.

  8. Additive lattice kirigami.

    PubMed

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  9. Ceramics with Different Additives

    NASA Astrophysics Data System (ADS)

    Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

    2014-09-01

    Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

  10. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  11. Atrazine and metolachlor occurrence in shallow ground water of the United States, 1993 to 1995: Relations to explanatory factors

    USGS Publications Warehouse

    Kolpin, D.W.; Barbash, J.E.; Gilliom, R.J.

    2002-01-01

    Since 1991, the U.S. Geological Survey has been conducting the National Water Quality Assessment (NAWQA) Program to determine the quality of the Nation's water resources. In an effort to obtain a better understanding of why pesticides are found in shallow ground water on a national scale, a set of factors likely to affect the fate and transport of two herbicides in the subsurface were examined. Atrazine and metolachlor were selected for this discussion because they were among the most frequently detected pesticides in ground water during the first phase of the NAWQA Program (1993 to 1995), and each was the most frequently detected compound in its chemical class (triazines and acetanilides, respectively). The factors that most strongly correlated with the frequencies of atrazine detection in shallow ground-water networks were those that provided either: (1) an indication of the potential susceptibility of ground water to atrazine contamination, or (2) an indication of relative ground-water age. The factors most closely related to the frequencies of metolachlor detection in ground water, however, were those that estimated or indicated the intensity of the agricultural use of metolachlor. This difference is probably the result of detailed use estimates for these compounds being available only for agricultural settings. While atrazine use is relatively extensive in nonagricultural settings, in addition to its widespread agricultural use, metolachlor is used almost exclusively for agricultural purposes. As a result, estimates of agricultural applications provide a less reliable indication of total chemical use for atrazine than for metolachlor. A multivariate analysis demonstrated that the factors of interest explained about 50 percent of the variance in atrazine and metolachlor detection frequencies among the NAWQA land-use studies examined. The inclusion of other factors related to pesticide fate and transport in ground water, or improvements in the quality and

  12. The North Texas aerospace manufacturing and aviation industries: An explanatory case study of school-to-work collaborative networks

    NASA Astrophysics Data System (ADS)

    Miller, Cynthia Ann

    The purpose of this study is to explore how educators, business partners and facilitators developed ties or networks to initiate a school-to-work collaboration to prepare students for jobs and careers in the aerospace manufacturing and aviation industries. There is growing concern about preparing a future workforce supply in these industries in North Texas. Workforce projections call for 8000 additional jobs between 2010 and 2020 (North Central Texas Council of Governments, 2013). Collaboration is recognized as a valuable asset to connect disjointed segments within the K-16 trajectory. This study explores the contradiction between the stated need for collaborative strategies and the inability of stakeholders attempting to collaborate across organizational and institutional boundaries to sustain these connections. Through the lens of networking theory, the roles of facilitators and the operation of networks and ties between and among partners are investigated. Ten participants in a high school curriculum development project were interviewed, representing a business, community college, and K-12 education. Data analysis revealed findings associated with three major themes: facilitation, project activity and relationships. Nine individuals were identified as facilitators, and facilitators were perceived as helping the project move forward. Project activity benefited from the structured curriculum development process. Although relationships characterized by strong ties helped start the project, weak ties predominated among project participants. Implications for theory include the need for more knowledge about facilitator roles and group dynamics. Further research about the functioning of weak and strong ties and facilitator skill sets relating to collaborative leadership would be valuable. Implications for practice include capturing lessons learned to apply to other industries, and overtly acknowledging the existence and importance of facilitators.

  13. Computational Process Modeling for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Bagg, Stacey; Zhang, Wei

    2014-01-01

    Computational Process and Material Modeling of Powder Bed additive manufacturing of IN 718. Optimize material build parameters with reduced time and cost through modeling. Increase understanding of build properties. Increase reliability of builds. Decrease time to adoption of process for critical hardware. Potential to decrease post-build heat treatments. Conduct single-track and coupon builds at various build parameters. Record build parameter information and QM Meltpool data. Refine Applied Optimization powder bed AM process model using data. Report thermal modeling results. Conduct metallography of build samples. Calibrate STK models using metallography findings. Run STK models using AO thermal profiles and report STK modeling results. Validate modeling with additional build. Photodiode Intensity measurements highly linear with power input. Melt Pool Intensity highly correlated to Melt Pool Size. Melt Pool size and intensity increase with power. Applied Optimization will use data to develop powder bed additive manufacturing process model.

  14. Interparental Conflict and Children’s School Adjustment: The Explanatory Role of Children’s Internal Representations of Interparental and Parent–Child Relationships

    PubMed Central

    Sturge-Apple, Melissa L.; Davies, Patrick T.; Winter, Marcia A.; Cummings, E. Mark; Schermerhorn, Alice

    2011-01-01

    This study examined how children’s insecure internal representations of interparental and parent–child relationships served as explanatory mechanisms in multiple pathways linking interparental conflict and parent emotional unavailability with the emotional and classroom engagement difficulties the children had in their adjustment to school. With their parents, 229 kindergarten children (127 girls and 102 boys, mean age = 6.0 years, SD = .50, at Wave 1) participated in this multimethod, 3-year longitudinal investigation. Findings revealed that children’s insecure representations of the interparental relationship were a significant intervening mechanism in associations between observational ratings of interparental conflict and child and teacher reports on children’s emotional and classroom difficulties in school over a 2-year period. Moreover, increased parental emotional unavailability accompanying high levels of interparental conflict was associated with children’s insecure representations of the parent–child relationship and children’s difficulties in classroom engagement at school entry. The findings highlight the importance of understanding the intrinsic processes that contribute to difficulties with stage-salient tasks for children who are experiencing interparental discord. PMID:18999330

  15. Representational power of restricted boltzmann machines and deep belief networks.

    PubMed

    Le Roux, Nicolas; Bengio, Yoshua

    2008-06-01

    Deep belief networks (DBN) are generative neural network models with many layers of hidden explanatory factors, recently introduced by Hinton, Osindero, and Teh (2006) along with a greedy layer-wise unsupervised learning algorithm. The building block of a DBN is a probabilistic model called a restricted Boltzmann machine (RBM), used to represent one layer of the model. Restricted Boltzmann machines are interesting because inference is easy in them and because they have been successfully used as building blocks for training deeper models. We first prove that adding hidden units yields strictly improved modeling power, while a second theorem shows that RBMs are universal approximators of discrete distributions. We then study the question of whether DBNs with more layers are strictly more powerful in terms of representational power. This suggests a new and less greedy criterion for training RBMs within DBNs.

  16. 30 CFR 75.825 - Power centers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Power centers. 75.825 Section 75.825 Mineral....825 Power centers. (a) Main disconnecting switch. The power center supplying high voltage power to the..., de-energizes input to all power transformers. (b) Trailing cable disconnecting device. In addition...

  17. Proceedings of a Topical Meeting On Small Scale Geothermal Power Plants and Geothermal Power Plant Projects

    SciTech Connect

    1986-02-12

    These proceedings describe the workshop of the Topical Meeting on Small Scale Geothermal Power Plants and Geothermal Power Plant Projects. The projects covered include binary power plants, rotary separator, screw expander power plants, modular wellhead power plants, inflow turbines, and the EPRI hybrid power system. Active projects versus geothermal power projects were described. In addition, a simple approach to estimating effects of fluid deliverability on geothermal power cost is described starting on page 119. (DJE-2005)

  18. Power Play.

    ERIC Educational Resources Information Center

    Aho, Timothy A.

    1998-01-01

    Describes how to integrate technology into old buildings beginning with an evaluation of the electric power systems. A case study is highlighted showing the process in determining existing conditions, assessing electric power needs, and designing upgrades. (GR)

  19. Explanatory chapter: next generation sequencing.

    PubMed

    Yegnasubramanian, Srinivasan

    2013-01-01

    Technological breakthroughs in sequencing technologies have driven the advancement of molecular biology and molecular genetics research. The advent of high-throughput Sanger sequencing (for information on the method, see Sanger Dideoxy Sequencing of DNA) in the mid- to late-1990s made possible the accelerated completion of the human genome project, which has since revolutionized the pace of discovery in biomedical research. Similarly, the advent of next generation sequencing is poised to revolutionize biomedical research and usher a new era of individualized, rational medicine. The term next generation sequencing refers to technologies that have enabled the massively parallel analysis of DNA sequence facilitated through the convergence of advancements in molecular biology, nucleic acid chemistry and biochemistry, computational biology, and electrical and mechanical engineering. The current next generation sequencing technologies are capable of sequencing tens to hundreds of millions of DNA templates simultaneously and generate >4 gigabases of sequence in a single day. These technologies have largely started to replace high-throughput Sanger sequencing for large-scale genomic projects, and have created significant enthusiasm for the advent of a new era of individualized medicine.

  20. Uncertainty Can Increase Explanatory Credibility

    DTIC Science & Technology

    2013-08-01

    metacognitive cue to infer their conversational partner’s depth of processing . Keywords: explanations, confidence, uncertainty, collaborative reasoning...scope, i.e., those that account for only observed phenomena (Khemlani, Sussman, & Oppenheimer , 2011). These preferences show that properties intrinsic...Fischhoff, & Phillips , 1982; Lindley, 1982; McClelland & Bolger, 1994). Much of the research on subjective confidence addresses how individuals

  1. Improving Explanatory Inferences from Assessments

    ERIC Educational Resources Information Center

    Diakow, Ronli Phyllis

    2013-01-01

    This dissertation comprises three papers that propose, discuss, and illustrate models to make improved inferences about research questions regarding student achievement in education. Addressing the types of questions common in educational research today requires three different "extensions" to traditional educational assessment: (1)…

  2. Explanatory Identities and Conceptual Change

    ERIC Educational Resources Information Center

    Thagard, Paul

    2014-01-01

    Although mind-brain identity remains controversial, many other identities of ordinary things with scientific ones are well established. For example, air is a mixture of gases, water is H[subscript 2]O, and fire is rapid oxidation. This paper examines the history of 15 important identifications: air, blood, cloud, earth, electricity, fire, gold,…

  3. Pulsed power

    NASA Astrophysics Data System (ADS)

    Stone, David H.

    Pulsed power systems are critical elements for such prospective weapons technologies as high-power microwaves, electrothermal and electromagnetic projectile launchers, neutral particle beams, space-based FELs, ground-based lasers, and charged particle beams. Pulsed power will also be essential for the development of nonweapon military systems such as lidars and ultrawideband radars, and could serve as the bases for nuclear weapon effect simulators. The pulsed power generation requirements for each of these systems is considered.

  4. Power processing

    NASA Technical Reports Server (NTRS)

    Schwarz, F. C.

    1971-01-01

    Processing of electric power has been presented as a discipline that draws on almost every field of electrical engineering, including system and control theory, communications theory, electronic network design, and power component technology. The cost of power processing equipment, which often equals that of expensive, sophisticated, and unconventional sources of electrical energy, such as solar batteries, is a significant consideration in the choice of electric power systems.

  5. Realist explanatory theory building method for social epidemiology: a protocol for a mixed method multilevel study of neighbourhood context and postnatal depression.

    PubMed

    Eastwood, John G; Jalaludin, Bin B; Kemp, Lynn A

    2014-01-01

    A recent criticism of social epidemiological studies, and multi-level studies in particular has been a paucity of theory. We will present here the protocol for a study that aims to build a theory of the social epidemiology of maternal depression. We use a critical realist approach which is trans-disciplinary, encompassing both quantitative and qualitative traditions, and that assumes both ontological and hierarchical stratification of reality. We describe a critical realist Explanatory Theory Building Method comprising of an: 1) emergent phase, 2) construction phase, and 3) confirmatory phase. A concurrent triangulated mixed method multilevel cross-sectional study design is described. The Emergent Phase uses: interviews, focus groups, exploratory data analysis, exploratory factor analysis, regression, and multilevel Bayesian spatial data analysis to detect and describe phenomena. Abductive and retroductive reasoning will be applied to: categorical principal component analysis, exploratory factor analysis, regression, coding of concepts and categories, constant comparative analysis, drawing of conceptual networks, and situational analysis to generate theoretical concepts. The Theory Construction Phase will include: 1) defining stratified levels; 2) analytic resolution; 3) abductive reasoning; 4) comparative analysis (triangulation); 5) retroduction; 6) postulate and proposition development; 7) comparison and assessment of theories; and 8) conceptual frameworks and model development. The strength of the critical realist methodology described is the extent to which this paradigm is able to support the epistemological, ontological, axiological, methodological and rhetorical positions of both quantitative and qualitative research in the field of social epidemiology. The extensive multilevel Bayesian studies, intensive qualitative studies, latent variable theory, abductive triangulation, and Inference to Best Explanation provide a strong foundation for Theory

  6. Anxiety Sensitivity and Smoking Behavior Among Trauma-Exposed Daily Smokers: The Explanatory Role of Smoking-Related Avoidance and Inflexibility.

    PubMed

    Bakhshaie, Jafar; Zvolensky, Michael J; Salazar, Adriana; Vujanovic, Anka A; Schmidt, Norman B

    2016-01-01

    Anxiety sensitivity (AS), defined as the extent to which individuals believe that anxiety-related sensations have harmful consequences, is associated with smoking processes and poorer clinical outcomes among trauma-exposed smokers. Yet the specific mechanisms underlying this association are unclear. Smoking-specific avoidance and inflexibility is a construct implicated in multiple manifestations of mood regulation that may underlie smoking behavior. The current study examined the explanatory role of smoking-specific avoidance and inflexibility in terms of the relation between AS and indices of smoking behavior among trauma-exposed smokers. The sample consisted of 217 treatment-seeking adult smokers (44% female; M age = 37.8; SD = 13.2; age range: 18-65 years), who were exposed to at least one lifetime Criterion A trauma event (Diagnostic and Statistical Manual of Mental Disorders [4th ed., text rev.; DSM-IV-TR] Criterion A for trauma exposure). Bootstrap analysis (5,000 re-samples) revealed that AS was indirectly related to the (a) number of cigarettes smoked per day, (b) number of years being a daily smoker, (c) number of failed quit attempts, and (d) heaviness of smoking index among trauma-exposed smokers through its relation with smoking-specific avoidance and inflexibility. These findings provide initial evidence suggesting that smoking-specific avoidance and inflexibility may be an important construct in better understanding AS-smoking relations among trauma-exposed smokers. Future work is needed to explore the extent to which smoking-specific avoidance and inflexibility account for relations between AS and other smoking processes (e.g., withdrawal, cessation outcome) in the context of trauma and smoking comorbidity.

  7. Deviant Peer Affiliation as an Explanatory Mechanism in the Association between Corporal Punishment and Physical Aggression: a Longitudinal Study among Chinese Adolescents.

    PubMed

    Zhu, Jianjun; Yu, Chengfu; Bao, Zhenzhou; Jiang, Yanping; Zhang, Wei; Chen, Yuanyuan; Qiu, Boyu; Zhang, Jianjun

    2017-01-09

    Previous research has focused primarily on corporal punishment as a cause and adolescents' physical aggression as an outcome. However, there is a large gap in knowledge of the potentially bidirectional association and explanatory mechanism underlying the association between corporal punishment and physical aggression. The current study, using a longitudinal design across three time points (the fall semester of 7th grade, the fall of 8th grade, and the fall of 9th grade), aimed to a) examine the reciprocal processes between corporal punishment and physical aggression, and b) explore whether deviant peer affiliation may explain such reciprocal connections. Only adolescents participating in all the three time points were included in this study, resulting in a final sample of 342 adolescents (175 boys, 167 girls) who completed questionnaires regarding corporal punishment, deviant peer affiliation, and aggression. Gender, age and socioeconomic status were controlled for in the analyses. Autoregressive cross-lagged models showed that the results did not support the direct reciprocal effect between corporal punishment and physical aggression among Chinese adolescents. A direct longitudinal link from corporal punishment to physical aggression was found, however, the inverse association was not significant. Moreover, regarding the longitudinal underlying process, in one direction, corporal punishment at 7th grade predicted higher levels of deviant peer affiliation at 8th grade. In turn, higher deviant peer affiliation at 8th grade predicted increased physical aggression at 9th grade. At the same time, in the other direction, adolescent physical aggression at 7th grade significantly predicted deviant peer affiliation at 8th grade. In turn, higher deviant peer affiliation at 8th grade predicted decreased corporal punishment at 9th grade. Identifying the direct and underlying reciprocal processes between corporal punishment and adolescent physical aggression has important

  8. Space Power

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Appropriate directions for the applied research and technology programs that will develop space power systems for U.S. future space missions beyond 1995 are explored. Spacecraft power supplies; space stations, space power reactors, solar arrays, thermoelectric generators, energy storage, and communication satellites are among the topics discussed.

  9. Power supply

    DOEpatents

    Yakymyshyn, Christopher Paul; Hamilton, Pamela Jane; Brubaker, Michael Allen

    2007-12-04

    A modular, low weight impedance dropping power supply with battery backup is disclosed that can be connected to a high voltage AC source and provide electrical power at a lower voltage. The design can be scaled over a wide range of input voltages and over a wide range of output voltages and delivered power.

  10. Bubble formation in additive manufacturing of glass

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Peters, Daniel C.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-05-01

    Bubble formation is a common problem in glass manufacturing. The spatial density of bubbles in a piece of glass is a key limiting factor to the optical quality of the glass. Bubble formation is also a common problem in additive manufacturing, leading to anisotropic material properties. In glass Additive Manufacturing (AM) two separate types of bubbles have been observed: a foam layer caused by the reboil of the glass melt and a periodic pattern of bubbles which appears to be unique to glass additive manufacturing. This paper presents a series of studies to relate the periodicity of bubble formation to part scan speed, laser power, and filament feed rate. These experiments suggest that bubbles are formed by the reboil phenomena why periodic bubbles result from air being trapped between the glass filament and the substrate. Reboil can be detected using spectroscopy and avoided by minimizing the laser power while periodic bubbles can be avoided by a two-step laser melting process to first establish good contact between the filament and substrate before reflowing the track with higher laser power.

  11. Informational power of quantum measurements

    SciTech Connect

    Dall'Arno, Michele; D'Ariano, Giacomo Mauro; Sacchi, Massimiliano F.

    2011-06-15

    We introduce the informational power of a quantum measurement as the maximum amount of classical information that the measurement can extract from any ensemble of quantum states. We prove the additivity by showing that the informational power corresponds to the classical capacity of a quantum-classical channel. We restate the problem of evaluating the informational power as the maximization of the accessible information of a suitable ensemble. We provide a numerical algorithm to find an optimal ensemble and quantify the informational power.

  12. Wind power prediction models

    NASA Technical Reports Server (NTRS)

    Levy, R.; Mcginness, H.

    1976-01-01

    Investigations were performed to predict the power available from the wind at the Goldstone, California, antenna site complex. The background for power prediction was derived from a statistical evaluation of available wind speed data records at this location and at nearby locations similarly situated within the Mojave desert. In addition to a model for power prediction over relatively long periods of time, an interim simulation model that produces sample wind speeds is described. The interim model furnishes uncorrelated sample speeds at hourly intervals that reproduce the statistical wind distribution at Goldstone. A stochastic simulation model to provide speed samples representative of both the statistical speed distributions and correlations is also discussed.

  13. Electric power annual 1992

    SciTech Connect

    Not Available

    1994-01-06

    The Electric Power Annual presents a summary of electric utility statistics at national, regional and State levels. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts and the general public with historical data that may be used in understanding US electricity markets. The Electric Power Annual is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. ``The US Electric Power Industry at a Glance`` section presents a profile of the electric power industry ownership and performance, and a review of key statistics for the year. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; retail sales; revenue; financial statistics; environmental statistics; electric power transactions; demand-side management; and nonutility power producers. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences in US electricity power systems. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. Monetary values in this publication are expressed in nominal terms.

  14. Industrial Power Factor Analysis Guidebook.

    SciTech Connect

    Electrotek Concepts.

    1995-03-01

    Power factor is a way of measuring the percentage of reactive power in an electrical system. Reactive power represents wasted energy--electricity that does no useful work because the electrical current is out of phase with the voltage. Reactive power is used by inductive loads (such as, motors, transformers, fluorescent lights, arc welders and induction furnaces) to sustain their magnetic fields. Electric systems with many motors exhibit low power factors, increased conductor and transformer losses, and lower voltages. Utilities must supply both active and reactive power and compensate for these losses. Power factor can be improved by the addition of shunt capacitors. Capacitors act in opposition to inductive loads, thereby minimizing the reactive power required to serve them. In raising the power factor, shunt capacitors release energy to the system, reduce system losses, and ultimately decrease power costs. Improving system power factor can reduce reactive and active power losses for both industry and utilities through the addition of shunt capacitors. This Guide Book gives electric utility technical staff, industrial end-users, consultants and BPA employees a step-by-step method for evaluating the cost effectiveness of installing power factor correction capacitors in an industrial plant.

  15. Surface analysis and evaluation of progressive addition lens

    NASA Astrophysics Data System (ADS)

    Li, Zhiying; Li, Dan

    2016-10-01

    The Progressive addition lens is used increasingly extensive with its advantages of meeting the requirements of distant and near vision at the same time. Started from the surface equations of progressive addition lens, combined with evaluation method of spherical power and cylinder power, the relationship equations between the surface sag and optical power distribution are derived. According to the requirements on difference of actual and nominal optical power from Chinese National Standard, the tolerance analysis and evaluation of prototype progressive addition surface with addition of 2.5m-1 ( 7.5m-1 10m-1 ) is given in detail. The tolerance analysis method provides theoretical proof for lens processing control accuracy, and the processing feasibility of lens is evaluated much more reasonably.

  16. Power system commonality study

    NASA Astrophysics Data System (ADS)

    Littman, Franklin D.

    1992-07-01

    A limited top level study was completed to determine the commonality of power system/subsystem concepts within potential lunar and Mars surface power system architectures. A list of power system concepts with high commonality was developed which can be used to synthesize power system architectures which minimize development cost. Examples of potential high commonality power system architectures are given in this report along with a mass comparison. Other criteria such as life cycle cost (which includes transportation cost), reliability, safety, risk, and operability should be used in future, more detailed studies to select optimum power system architectures. Nineteen potential power system concepts were identified and evaluated for planetary surface applications including photovoltaic arrays with energy storage, isotope, and nuclear power systems. A top level environmental factors study was completed to assess environmental impacts on the identified power system concepts for both lunar and Mars applications. Potential power system design solutions for commonality between Mars and lunar applications were identified. Isotope, photovoltaic array (PVA), regenerative fuel cell (RFC), stainless steel liquid-metal cooled reactors (less than 1033 K maximum) with dynamic converters, and in-core thermionic reactor systems were found suitable for both lunar and Mars environments. The use of SP-100 thermoelectric (TE) and SP-100 dynamic power systems in a vacuum enclosure may also be possible for Mars applications although several issues need to be investigated further (potential single point failure of enclosure, mass penalty of enclosure and active pumping system, additional installation time and complexity). There are also technical issues involved with development of thermionic reactors (life, serviceability, and adaptability to other power conversion units). Additional studies are required to determine the optimum reactor concept for Mars applications. Various screening

  17. Electric power

    SciTech Connect

    Chase, M.

    1988-01-01

    This text examines the critical problems faced by the electric power industry, shown in the context of a detailed description of the history and development of the industry. A new industry initiative is proposed that will allow for a more effective response to industry fluctuations. Topics covered include developments in power technology federal nuclear power regulation and legislation, environmentalism and conservationism, industry financial problems, capital minimization, and responses to utility responsibility.

  18. Solar Powered Refrigeration System

    NASA Technical Reports Server (NTRS)

    Ewert, Michael K. (Inventor); Bergeron, David J., III (Inventor)

    2002-01-01

    A solar powered vapor compression refrigeration system is made practicable with thermal storage and novel control techniques. In one embodiment, the refrigeration system includes a photovoltaic panel, a variable speed compressor, an insulated enclosure, and a thermal reservoir. The photovoltaic (PV) panel converts sunlight into DC (direct current) electrical power. The DC electrical power drives a compressor that circulates refrigerant through a vapor compression refrigeration loop to extract heat from the insulated enclosure. The thermal reservoir is situated inside the insulated enclosure and includes a phase change material. As heat is extracted from the insulated enclosure, the phase change material is frozen, and thereafter is able to act as a heat sink to maintain the temperature of the insulated enclosure in the absence of sunlight. The conversion of solar power into stored thermal energy is optimized by a compressor control method that effectively maximizes the compressor's usage of available energy. A capacitor is provided to smooth the power voltage and to provide additional current during compressor start-up. A controller monitors the rate of change of the smoothed power voltage to determine if the compressor is operating below or above the available power maximum, and adjusts the compressor speed accordingly. In this manner, the compressor operation is adjusted to convert substantially all available solar power into stored thermal energy.

  19. Solar Powered Refrigeration System

    NASA Astrophysics Data System (ADS)

    Ewert, Michael K.; Bergeron, David J., III

    2002-09-01

    A solar powered vapor compression refrigeration system is made practicable with thermal storage and novel control techniques. In one embodiment, the refrigeration system includes a photovoltaic panel, a variable speed compressor, an insulated enclosure, and a thermal reservoir. The photovoltaic (PV) panel converts sunlight into DC (direct current) electrical power. The DC electrical power drives a compressor that circulates refrigerant through a vapor compression refrigeration loop to extract heat from the insulated enclosure. The thermal reservoir is situated inside the insulated enclosure and includes a phase change material. As heat is extracted from the insulated enclosure, the phase change material is frozen, and thereafter is able to act as a heat sink to maintain the temperature of the insulated enclosure in the absence of sunlight. The conversion of solar power into stored thermal energy is optimized by a compressor control method that effectively maximizes the compressor's usage of available energy. A capacitor is provided to smooth the power voltage and to provide additional current during compressor start-up. A controller monitors the rate of change of the smoothed power voltage to determine if the compressor is operating below or above the available power maximum, and adjusts the compressor speed accordingly. In this manner, the compressor operation is adjusted to convert substantially all available solar power into stored thermal energy.

  20. How Safe Are Color Additives?

    MedlinePlus

    ... Home For Consumers Consumer Updates How Safe are Color Additives? Share Tweet Linkedin Pin it More sharing ... Consumer Updates RSS Feed Download PDF (380 K) Color additives give the red tint to your fruit ...

  1. Cyanoethylated compounds as additives in lithium/lithium batteries

    DOEpatents

    Nagasubramanian, Ganesan

    1999-01-01

    The power loss of lithium/lithium ion battery cells is significantly reduced, especially at low temperatures, when about 1% by weight of an additive is incorporated in the electrolyte layer of the cells. The usable additives are organic solvent soluble cyanoethylated polysaccharides and poly(vinyl alcohol). The power loss decrease results primarily from the decrease in the charge transfer resistance at the interface between the electrolyte and the cathode.

  2. Detergent Additive for Lubricating Oils,

    DTIC Science & Technology

    The Russian patent pertains to a method of producing additives for lubricating oils . A method is known for producing an antiwear additive for... lubricating oils by processing phenols with phosphorus oxychloride, phosphoric acid esters are obtained. In order to give the additive detergent properties

  3. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  4. Environmental Assessment for power marketing policy for Southwestern Power Administration

    SciTech Connect

    Not Available

    1993-12-01

    Southwestern Power Administration (Southwestern) needs to renew expiring power sales contracts with new term (10 year) sales contracts. The existing contracts have been in place for several years and many will expire over the next ten years. Southwestern completed an Environmental Assessment on the existing power allocation in June, 1979 (a copy of the EA is attached), and there are no proposed additions of any major new generation resources, service to discrete major new loads, or major changes in operating parameters, beyond those included in the existing power allocation. Impacts from a no action plan, proposed alternative, and market power for less than 10 years are described.

  5. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  6. Diastatic power

    Technology Transfer Automated Retrieval System (TEKTRAN)

    diastatic power: Diastatic power, abbreviated DP, is the total activity of malt starch degrading enzymes that hydrolyze starch to fermentable sugars. The starch degrading enzymes contributing to this process are a-amylase, ß-amylase, limit dextrinase, and a-glucosidase. The driving force for DP a...

  7. Power Teaching

    ERIC Educational Resources Information Center

    Fluellen, Jerry E., Jr.

    2007-01-01

    Power Teaching weaves four factors into a seamless whole: standards, teaching thinking, research based strategies, and critical inquiry. As a prototype in its first year of development with an urban fifth grade class, the power teaching model connects selected district standards, thinking routines from Harvard University Project Zero Research…

  8. Powerful Literacies.

    ERIC Educational Resources Information Center

    Crowther, Jim, Ed.; Hamilton, Mary, Ed.; Tett, Lyn, Ed.

    These 15 papers share a common theme: seeking to promote literacy as a powerful tool for challenging existing inequalities and dependencies. "Powerful Literacies" (Jim Crowther et al.) is an introduction. Section 1 establishes the theoretical and policy frameworks that underpin the book and shows how literacy is situated in different…

  9. Power systems

    NASA Astrophysics Data System (ADS)

    Kaplan, G.

    1982-01-01

    Significant events in current, prototype, and experimental utility power generating systems in 1981 are reviewed. The acceleration of licensing and the renewal of plans for reprocessing of fuel for nuclear power plants are discussed, including the rise of French reactor-produced electricity to over 40% of the country's electrical output. A 4.5 MW fuel cell neared completion in New York City, while three 2.5 MW NASA-designed windpowered generators began producing power in the state of Washington. Static bar compensators, nonflammable-liquid cooled power transformers, and ZnO surge arrestors were used by utilities for the first time, and the integration of a coal gasifier-combined cycle power plant approached the planning phase. An MHD generator was run for 1000 hours and produced 50-60 kWe, while a 20 MVA superconducting generator was readied for testing.

  10. Power options for lunar exploration

    SciTech Connect

    Bamberger, J.A.; Gaustad, K.L.

    1992-01-01

    This paper presents an overview of the types of power systems available for providing power on the moon. Lunar missions of exploration, in situ resource utilization, and colonization will be constrained by availability of adequate power. The length of the lunar night places severe limitations on solar power system designs, because a large portion of the system mass is devoted to energy storage. The selection of the ideal power source hardware will require compatibility with not only the lunar base power requirements and environment, but also with the conversion, storage, and transmission equipment. In addition, further analysis to determine the optimum operating parameters for a given power system should be conducted so that critical technologies can be identified in the early stages of base development. This paper describes the various concepts proposed for providing power on the lunar surface and compare their ranges of applicability. The importance of a systems approach to the integration of these components will also be discussed.

  11. A power beaming based infrastructure for space power

    SciTech Connect

    Bamberger, J.A.

    1991-08-01

    At present all space mission power requirements are met by integral, on-board, self-contained power systems. To provide needed flexibility for space exploration and colonization, an additional approach to on-board, self-contained power systems is needed. Power beaming, an alternative approach to providing power, has the potential to provide increased mission flexibility while reducing total mass launched into space. Laser-power beaming technology provides a viable power and communication infrastructure that can be developed sequentially as it is applied to power satellite constellations in Earth orbit and to orbital transport vehicles transferring satellites and cargos to geosynchronous orbit and beyond. Coupled with nuclear electric propulsion systems for cargo transport, the technology can be used to provide global power to the Lunar surface and to Mars' surface and moons. The technology can be developed sequentially as advances in power system and propulsion system technology occur. This paper presents stepwise development of an infrastructure based on power beaming that can support the space development and exploration goals of the Space Exploration Initiative. Power scenarios based on commonality of power systems hardware with cargo transport vehicles are described. Advantages of this infrastructure are described. 12 refs., 4 figs., 1 tab.

  12. 3D-additive manufactured optical mount

    NASA Astrophysics Data System (ADS)

    Mammini, Paul V.; Ciscel, David; Wooten, John

    2015-09-01

    The Area Defense Anti-Munitions (ADAM) is a low cost and effective high power laser weapon system. It's designed to address and negate important threats such as short-range rockets, UAVs, and small boats. Many critical optical components operate in the system. The optics and mounts must accommodate thermal and mechanical stresses, plus maintain an exceptional wave front during operation. Lockheed Martin Space Systems Company (LMSSC) developed, designed, and currently operates ADAM. This paper covers the design and development of a key monolithic, flexured, titanium mirror mount that was manufactured by CalRAM using additive processes.

  13. Additive Manufacturing of Hierarchical Porous Structures

    SciTech Connect

    Grote, Christopher John

    2016-08-30

    Additive manufacturing has become a tool of choice for the development of customizable components. Developments in this technology have led to a powerful array of printers that t serve a variety of needs. However, resin development plays a crucial role in leading the technology forward. This paper addresses the development and application of printing hierarchical porous structures. Beginning with the development of a porous scaffold, which can be functionalized with a variety of materials, and concluding with customized resins for metal, ceramic, and carbon structures.

  14. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-09

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  15. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  16. 18 CFR 367.59 - Additions and retirements of property.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Service Company Property Instructions § 367.59 Additions and retirements of property. (a) For the purpose of avoiding undue refinement in accounting for additions to and retirements...

  17. 18 CFR 367.59 - Additions and retirements of property.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Service Company Property Instructions § 367.59 Additions and retirements of property. (a) For the purpose of avoiding undue refinement in accounting for additions to and retirements...

  18. 18 CFR 367.59 - Additions and retirements of property.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Service Company Property Instructions § 367.59 Additions and retirements of property. (a) For the purpose of avoiding undue refinement in accounting for additions to and retirements...

  19. Embedding Sensors During Additive Manufacturing

    SciTech Connect

    Sbriglia, Lexey Raylene

    2015-08-10

    This PowerPoint presentation had the following headings: Fused deposition modeling (FDM); Open source 3D printing; Objectives; Vibration analysis; Equipment; Design; Material choices; Failure causes, such as tension, bubbling; Potential solutions; Simulations; Embedding the sensors; LabView programming; Alternate data acquisition; Problem and proposed solution; and, Conclusions

  20. "If I write like a scientist, then soy un cientifico": Differentiated Writing Supports and the Effects on Fourth-Grade English Proficient Students' and English Language Learners' Science Content Knowledge and Explanatory Writing About Magnetism and Electricity

    NASA Astrophysics Data System (ADS)

    Lichon, Kathryn A.

    The purpose of this pre-post quasi-experimental dissertation was to investigate the effects of differentiated writing supports on English Proficient Students' (EPSs) and English Language Learners' (ELLs) science content knowledge and explanatory writing about magnetism and electricity. Eighty-seven fourth-grade students (EPSs = 35; ELLs = 52) were randomly assigned to two groups based on two differentiated writing: guided questions ( n = 43) or targeted writing frames (n = 44). In the guided questions condition, students completed four question sets after a science investigation, and in the targeted writing frames condition, students completed the same four question sets, but with explicit support for vocabulary, transitions, and relational language in the form of if-then statements. Over the course of the four week intervention, students completed a total of nine writing tasks, and were pretested and posttested on six variables: magnetism and electricity content knowledge test, explanatory writing task, total number of words written, total number of sentences written, number of if-then statements, and number of content-based vocabulary words. Results indicate that EPSs and ELLs in both writing conditions improved significantly from pretest to posttest on six content and explanatory writing variables, with statistically significant gain scores occurring for the magnetism and electricity content knowledge test in which the targeted writing frames condition had a larger rate of gain. ANCOVA results indicated that in comparing writing conditions, a statistically significant difference was found for magnetism and electricity content knowledge posttests, when controlling for pretests. No statistically significant effects for language classification on the six variables were found when controlling for pretest scores. Interaction effects between writing condition and language classification were statistically significantly different for the interaction effect found on if

  1. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  2. Additive Effects on Asymmetric Catalysis.

    PubMed

    Hong, Liang; Sun, Wangsheng; Yang, Dongxu; Li, Guofeng; Wang, Rui

    2016-03-23

    This review highlights a number of additives that can be used to make asymmetric reactions perfect. Without changing other reaction conditions, simply adding additives can lead to improved asymmetric catalysis, such as reduced reaction time, improved yield, or/and increased selectivity.

  3. Power performance

    SciTech Connect

    Anderson, J.

    1996-04-01

    Two power generation engineering and construction firms with international markets are briefly described in this article. Bibb and Associates and Black & Veatch, both Kansas-based companies, are discussed. Current projects and services provided by the companies are described.

  4. Fusion Power.

    ERIC Educational Resources Information Center

    Dingee, David A.

    1979-01-01

    Discusses the extraordinary potential, the technical difficulties, and the financial problems that are associated with research and development of fusion power plants as a major source of energy. (GA)

  5. Power combiner

    DOEpatents

    Arnold, Mobius; Ives, Robert Lawrence

    2006-09-05

    A power combiner for the combining of symmetric and asymmetric traveling wave energy comprises a feed waveguide having an input port and a launching port, a reflector for reflecting launched wave energy, and a final waveguide for the collection and transport of launched wave energy. The power combiner has a launching port for symmetrical waves which comprises a cylindrical section coaxial to the feed waveguide, and a launching port for asymmetric waves which comprises a sawtooth rotated about a central axis.

  6. Active Power Controls from Wind Power: Bridging the Gaps

    SciTech Connect

    Ela, E.; Gevorgian, V.; Fleming, P.; Zhang, Y. C.; Singh, M.; Muljadi, E.; Scholbrook, A.; Aho, J.; Buckspan, A.; Pao, L.; Singhvi, V.; Tuohy, A.; Pourbeik, P.; Brooks, D.; Bhatt, N.

    2014-01-01

    This paper details a comprehensive study undertaken by the National Renewable Energy Laboratory, Electric Power Research Institute, and the University of Colorado to understand how the contribution of wind power providing active power control (APC) can benefit the total power system economics, increase revenue streams, improve the reliability and security of the power system, and provide superior and efficient response while reducing any structural and loading impacts that may reduce the life of the wind turbine or its components. The study includes power system simulations, control simulations, and actual field tests using turbines at NREL's National Wind Technology Center (NWTC). The study focuses on synthetic inertial control, primary frequency control, and automatic generation control, and analyzes timeframes ranging from milliseconds to minutes to the lifetime of wind turbines, locational scope ranging from components of turbines to large wind plants to entire synchronous interconnections, and additional topics ranging from economics to power system engineering to control design.

  7. Maintenance of photovoltaic power systems

    NASA Astrophysics Data System (ADS)

    Hall, M. R.

    1984-08-01

    This publication establishes standard practices for inspection, testing, and maintenance of photovoltaic power systems at Dept. of the Navy installations. The practices and procedures are recommended to ensure reliable operation of the power systems. The manual covers photovoltaic-array, battery, voltage-regulator, inverter, and wiring subsystems. In addition, this manual provides a troubleshooting guide and self-study questions and answers.

  8. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  9. Adverse reactions to drug additives.

    PubMed

    Simon, R A

    1984-10-01

    There is a long list of additives used by the pharmaceutical industry. Most of the agents used have not been implicated in hypersensitivity reactions. Among those that have, only reactions to parabens and sulfites have been well established. Parabens have been shown to be responsible for rare immunoglobulin E-mediated reactions that occur after the use of local anesthetics. Sulfites, which are present in many drugs, including agents commonly used to treat asthma, have been shown to provoke severe asthmatic attacks in sensitive individuals. Recent studies indicate that additives do not play a significant role in "hyperactivity." The role of additives in urticaria is not well established and therefore the incidence of adverse reactions in this patient population is simply not known. In double-blind, placebo-controlled studies, reactions to tartrazine or additives other than sulfites, if they occur at all, are indeed quite rare for the asthmatic population, even for the aspirin-sensitive subpopulation.

  10. Radiation Therapy: Additional Treatment Options

    MedlinePlus

    ... SNIPEND SNIPSTART Find A Radiation Oncologist SNIPEND Additional Treatment Options SNIPSTART A A SNIPEND Chemotherapy Medicines prescribed ... such as antibodies, to fight cancer. Novel Targeted Therapies Cancer doctors now know much more about how ...

  11. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  12. Power plants to go

    SciTech Connect

    Valenti, M.

    1996-05-01

    Simple-cycle portable power stations have been used to increase the electrical capacity in developing countries and in emergency situations. This article describes the first power barge using combined-cycle technology which has began operation in the Dominican Republic. The construction of a new mobile power plant in Puerto Plata, the Dominican Republic, marks the first time a power barge has been coupled with the efficiency of combined-cycle generation. The 185-megawatt plant, which became fully operational in January, provides 25% of the power required by the Dominican state-owned utility, the Corporacion Dominicana de Electricidad (CDE). The new plant is designed to end the power shortages and blackouts that have traditionally plagued the Caribbean nation. The Puerto Plata plant consists of two barges that were built in the US, transported to the Dominican Republic, installed, and backfilled into place. One barge, delivered in May 1994, contains a 76-megawatt gas turbine. The second barge, installed in April 1995, contains a 45-megawatt heat-recovery steam generator to recover heat energy from the turbine exhaust, two auxiliary boilers to produce additional steam, and a 118-megawatt steam-turbine generator.

  13. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  14. Power inverters

    SciTech Connect

    Miller, David H; Korich, Mark D; Smith, Gregory S

    2011-11-15

    Power inverters include a frame and a power module. The frame has a sidewall including an opening and defining a fluid passageway. The power module is coupled to the frame over the opening and includes a substrate, die, and an encasement. The substrate includes a first side, a second side, a center, an outer periphery, and an outer edge, and the first side of the substrate comprises a first outer layer including a metal material. The die are positioned in the substrate center and are coupled to the substrate first side. The encasement is molded over the outer periphery on the substrate first side, the substrate second side, and the substrate outer edge and around the die. The encasement, coupled to the substrate, forms a seal with the metal material. The second side of the substrate is positioned to directly contact a fluid flowing through the fluid passageway.

  15. Power transmission

    SciTech Connect

    Yale, O.S.

    1989-12-12

    This patent describes a power transmission. It comprises: in combination, a master gear having at least one annular tooth set, means for drivingly engaging the master gear with a power source, driven shaft, a yoke member attached to the shaft and including a screw pump housing extending radially with respect to the shaft with a pair of ports in spaced relation, a pump screw rotatable in the housing and a pump gear attached to the screw and engaging the annular tooth set, and a casing for transmission fluid. The pump housing being located for immersion in the fluid.

  16. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  17. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  18. Additive manufacturing of hybrid circuits

    SciTech Connect

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  19. Power Systems Control Architecture

    SciTech Connect

    James Davidson

    2005-01-01

    A diagram provided in the report depicts the complexity of the power systems control architecture used by the national power structure. It shows the structural hierarchy and the relationship of the each system to those other systems interconnected to it. Each of these levels provides a different focus for vulnerability testing and has its own weaknesses. In evaluating each level, of prime concern is what vulnerabilities exist that provide a path into the system, either to cause the system to malfunction or to take control of a field device. An additional vulnerability to consider is can the system be compromised in such a manner that the attacker can obtain critical information about the system and the portion of the national power structure that it controls.

  20. Power enhanced frequency conversion system

    NASA Technical Reports Server (NTRS)

    Sanders, Steven (Inventor); Lang, Robert J. (Inventor); Waarts, Robert G. (Inventor)

    2001-01-01

    A frequency conversion system includes at least one source providing a first near-IR wavelength output including a gain medium for providing high power amplification, such as double clad fiber amplifier, a double clad fiber laser or a semiconductor tapered amplifier to enhance the power output level of the near-IR wavelength output. The NFM device may be a difference frequency mixing (DFM) device or an optical parametric oscillation (OPO) device. Pump powers are gain enhanced by the addition of a rare earth amplifier or oscillator, or a Ra-man/Brillouin amplifier or oscillator between the high power source and the NFM device.

  1. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  2. Power Struggle.

    ERIC Educational Resources Information Center

    Cook, Glenn

    2001-01-01

    California's "power struggle" will probably not be replicated in the other 23 states that have deregulated electricity, but costs are rising everywhere. The Environmental Protection Agency/Department of Energy's new Energy Star online rating system should help school officials measure their buildings' efficiency and remove barriers to…

  3. Stigma power.

    PubMed

    Link, Bruce G; Phelan, Jo

    2014-02-01

    When people have an interest in keeping other people down, in or away, stigma is a resource that allows them to obtain ends they desire. We call this resource "stigma power" and use the term to refer to instances in which stigma processes achieve the aims of stigmatizers with respect to the exploitation, control or exclusion of others. We draw on Bourdieu (1987, 1990) who notes that power is often most effectively deployed when it is hidden or "misrecognized." To explore the utility of the stigma-power concept we examine ways in which the goals of stigmatizers are achieved but hidden in the stigma coping efforts of people with mental illnesses. We developed new self-report measures and administered them to a sample of individuals who have experienced mental illness to test whether results are consistent with the possibility that, in response to negative societal conceptions, the attitudes, beliefs and behaviors of people with psychosis lead them to be concerned with staying in, propelled to stay away and induced to feel downwardly placed - precisely the outcomes stigmatizers might desire. Our introduction of the stigma-power concept carries the possibility of seeing stigmatizing circumstances in a new light.

  4. Power, Revisited

    ERIC Educational Resources Information Center

    Roscigno, Vincent J.

    2011-01-01

    Power is a core theoretical construct in the field with amazing utility across substantive areas, levels of analysis and methodologies. Yet, its use along with associated assumptions--assumptions surrounding constraint vs. action and specifically organizational structure and rationality--remain problematic. In this article, and following an…

  5. Power Controller

    NASA Astrophysics Data System (ADS)

    1983-01-01

    The power factor controller (PFC) senses shifts in the relationship between voltage and current, and matches them with a motor's need. This prevents waste as motors do not need a high voltage when they are not operating at full load conditions. PFC is manufactured by Nordic Controls Company, among others, and has proved extremely cost effective.

  6. Perpetual Power?

    SciTech Connect

    Madison, Alison L.

    2010-02-16

    This is a submission to Innovation Magazine for its January 2010 Clean-tech issue. The article discusses PNNL's award-winning Thermoelectric Ambient Energy Harvester technology, its license to Perpetua Power Source Technologies, Perpetua's subsequent product based on the PNNL technology, and where they're headed with it.

  7. Power Trains.

    ERIC Educational Resources Information Center

    Kukuk, Marvin; Mathis, Joe

    This curriculum guide is part of a series designed to teach students about diesel engines. The materials in this power trains guide apply to both on-road and off-road vehicles and include information about chain and belt drives used in tractors and combines. These instructional materials, containing nine units, are written in terms of student…

  8. Star Power

    SciTech Connect

    2014-10-17

    The U.S. Department of Energy's Princeton Plasma Physics Laboratory has released ''Star Power,'' a new informational video that uses dramatic and beautiful images and thought-provoking interviews to highlight the importance of the Laboratory's research into magnetic fusion.

  9. Star Power

    ScienceCinema

    None

    2016-07-12

    The U.S. Department of Energy's Princeton Plasma Physics Laboratory has released ''Star Power,'' a new informational video that uses dramatic and beautiful images and thought-provoking interviews to highlight the importance of the Laboratory's research into magnetic fusion.

  10. High-power, widely-tunable Cr(2+):ZnSemaster oscillator power amplifier systems.

    PubMed

    Berry, P A; Schepler, K L

    2010-07-05

    We demonstrate high-power Cr(2+):ZnSe master oscillator power amplifier (MOPA) pure continuous wave (CW) laser systems with output power of 14 W and amplifier gain greater than 2X. In addition, we develop a theoretical model for this type of amplification and show single-knob tunability at high powers over 400 nm.

  11. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  12. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  13. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  14. A zero-power radio receiver.

    SciTech Connect

    Brocato, Robert Wesley

    2004-09-01

    This report describes both a general methodology and some specific examples of passive radio receivers. A passive radio receiver uses no direct electrical power but makes sole use of the power available in the radio spectrum. These radio receivers are suitable as low data-rate receivers or passive alerting devices for standard, high power radio receivers. Some zero-power radio architectures exhibit significant improvements in range with the addition of very low power amplifiers or signal processing electronics. These ultra-low power radios are also discussed and compared to the purely zero-power approaches.

  15. Nano-Magnets and Additive Manufacturing for Electric Motors

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.

    2014-01-01

    High power density is required for application of electric motors in hybrid electric propulsion. Potential path to achieve high power density in electric motors include advanced materials, lightweight thermal management, lightweight structural concepts, high power density power electronics, and advanced manufacturing. This presentation will focus on two key technologies for achieving high power density, advanced magnets and additive manufacturing. The maximum energy product in current magnets is reaching their theoretical limits as a result of material and process improvements. Future improvements in the maximum energy product for magnets can be achieved through development of nanocomposite magnets combining the hard magnetic phase and soft magnetic phase at the nanoscale level. The presentation will provide an overview of the current state of development for nanocomposite magnets and the future path for doubling the maximum energy product. The other part of the presentation will focus on the role of additive manufacturing in fabrication of high power density electric motors. The presentation will highlight the potential opportunities for applying additive manufacturing to fabricate electric motors.

  16. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  17. THERMOELECTRIC POWER MODULES.

    DTIC Science & Technology

    During this reporting period the four thermo electric power modules which were put on life test completed 2000 hours of unattended operation. A hot...junction temperature of 800 C was main tained. During this time period satisfactory performance of the modules was observed and the test is continuing...Two additional modules were started on a cycled life test , one hour on and one and one half hours off for an eight hour period, and continuous

  18. Power superconducting power transmission cable

    DOEpatents

    Ashworth, Stephen P.

    2003-06-10

    The present invention is for a compact superconducting power transmission cable operating at distribution level voltages. The superconducting cable is a conductor with a number of tapes assembled into a subconductor. These conductors are then mounted co-planarly in an elongated dielectric to produce a 3-phase cable. The arrangement increases the magnetic field parallel to the tapes thereby reducing ac losses.

  19. Power superconducting power transmission cable

    DOEpatents

    Ashworth, Stephen P.

    2003-01-01

    The present invention is for a compact superconducting power transmission cable operating at distribution level voltages. The superconducting cable is a conductor with a number of tapes assembled into a subconductor. These conductors are then mounted co-planarly in an elongated dielectric to produce a 3-phase cable. The arrangement increases the magnetic field parallel to the tapes thereby reducing ac losses.

  20. Electrical power systems for Mars

    NASA Technical Reports Server (NTRS)

    Giudici, Robert J.

    1986-01-01

    Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

  1. Electrical power systems for Mars

    NASA Astrophysics Data System (ADS)

    Giudici, Robert J.

    1986-05-01

    Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

  2. Power considerations for MAST platforms

    NASA Astrophysics Data System (ADS)

    Morgan, Brian; Bedair, Sarah; Pulskamp, Jeffrey S.; Polcawich, Ronald G.; Meyer, Christopher; Dougherty, Christopher; Lin, Xue; Arnold, David; Bashirullah, Rizwan; Miller, Ryan; Roosz, Mark

    2010-04-01

    Scaling down autonomous robotic systems introduces numerous challenges in mechanical design, electrical/sensor subsystems, and autonomous control. One particularly daunting task is the design of the power system, since this will ultimately limit all microrobot or micro-UAV's operations. Power sources like lithium polymer batteries possess sufficient power density for basic mobility (walking, fixed wing flight, flapping/hovering), but improved power sources are needed that offer increased energy density in order to extend mission lifetimes - preferably pushing from minutes to multiple hours or days. Additionally, the source power must be efficiently converted and distributed to the various microrobot subsystems. Each system may require a different voltage, current, and duty cycle. This paper will review some of the power-specific challenges related to developing small, mobile autonomous systems.

  3. M-C Power commercialization program for MCFC power plants

    NASA Astrophysics Data System (ADS)

    Cámara, E. H.; Schora, F. C.

    1992-01-01

    M-C Power Corporation was established by the Institute of Gas Technology (IGT) to develop, manufacture, market, sell and service commercial MCFC power plants using IGT's IMHEX® fuel cell stack concept. M-C Power has created an integrated commercialization program to develop a market-responsive, natural gas-fueled MCFC power plant. M-C Power's market entry offering will range from 500 kW to 3 MW and will be designed for on-site and distributed power applications. Future products will include a wider range of sizes for distributed power and power plants for dispersed (30-50 MW) and base load ( > 100 MW) power generation, the latter fueled by coal-derived gases. M-C Power Corporation has established the world's most advanced MCFC components and stack manufacturing facilities at its plant in Burr Ridge, IL, capable of producing 3 MW/year of stacks based on one shift per day, five days per week operation. This capacity can be increased to 12 MW/year by adding one tape casting machine and operating three shifts per day for 330 days/year. An industry group has been formed to guide, support, and stimulate the IMHEX® Commercialization Program. This group is called the Alliance to Commercialize Carbonate Technology (ACCT). ACCT members include electric, gas and combination utilities as well as pipeline companies and potential industrial users. In addition, the program enjoys wide support from government, industry and research institutions.

  4. Power converter

    NASA Technical Reports Server (NTRS)

    Black, J. M. (Inventor)

    1981-01-01

    A dc-to-dc converter employs four transistor switches in a bridge to chop dc power from a source, and a voltage multiplying diode rectifying ladder network to rectify and filter the chopped dc power for delivery to a load. The bridge switches are cross coupled in order for diagonally opposite pairs to turn on and off together using RC networks for the cross coupling to achieve the mode of operation of a free running multivibrator, and the diode rectifying ladder is configured to operate in a push-pull mode driven from opposite sides of the multivibrator outputs of the ridge switches. The four transistor switches provide a square-wave output voltage which as a peak-to-peak amplitude that is twice the input dc voltage, and is thus useful as a dc-to-ac inverter.

  5. The Frontiers of Additive Manufacturing

    SciTech Connect

    Grote, Christopher John

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  6. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  7. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  8. Nanoengineered Additives for Active Coatings

    DTIC Science & Technology

    2007-04-01

    commercial ad bial activ component from the coating, leading to eventual depletion of the film. Small TPU samples were evaluated using a Kirby - Bauer ...7 Table 5. Summary of 24-hr ASTM E 2180 tests with 1 weight-percent additive in PUr (solvent dispersible) based on 6-log loading of...Noveon X-1150). The ASTM E 2180 test is run in triplicate (Note that alternative ro 1° amines) was suspended in dry tetrahydrofuran (THF) (150 mL) in

  9. Power supply

    DOEpatents

    Hart, Edward J.; Leeman, James E.; MacDougall, Hugh R.; Marron, John J.; Smith, Calvin C.

    1976-01-01

    An electric power supply employs a striking means to initiate ferroelectric elements which provide electrical energy output which subsequently initiates an explosive charge which initiates a second ferroelectric current generator to deliver current to the coil of a magnetic field current generator, creating a magnetic field around the coil. Continued detonation effects compression of the magnetic field and subsequent generation and delivery of a large output current to appropriate output loads.

  10. Reversible Oxidative Addition at Carbon.

    PubMed

    Eichhorn, Antonius F; Fuchs, Sonja; Flock, Marco; Marder, Todd B; Radius, Udo

    2017-04-07

    The reactivity of N-heterocyclic carbenes (NHCs) and cyclic alkyl amino carbenes (cAACs) with arylboronate esters is reported. The reaction with NHCs leads to the reversible formation of thermally stable Lewis acid/base adducts Ar-B(OR)2 ⋅NHC (Add1-Add6). Addition of cAAC(Me) to the catecholboronate esters 4-R-C6 H4 -Bcat (R=Me, OMe) also afforded the adducts 4-R-C6 H4 Bcat⋅cAAC(Me) (Add7, R=Me and Add8, R=OMe), which react further at room temperature to give the cAAC(Me) ring-expanded products RER1 and RER2. The boronate esters Ar-B(OR)2 of pinacol, neopentylglycol, and ethyleneglycol react with cAAC at RT via reversible B-C oxidative addition to the carbene carbon atom to afford cAAC(Me) (B{OR}2 )(Ar) (BCA1-BCA6). NMR studies of cAAC(Me) (Bneop)(4-Me-C6 H4 ) (BCA4) demonstrate the reversible nature of this oxidative addition process.

  11. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; ...

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  12. Control of a Shunt Active Power Filter with Neural Networks—Theory and Practical Results

    NASA Astrophysics Data System (ADS)

    Villalva, Marcelo G.; Filho, Ernesto Ruppert

    This paper presents theoretical studies and practical results obtained with a four-wire shunt active power filter fully controlled with neural networks. The paper is focused on a current compensation method based on adaptive linear elements (adalines), which are powerful and easy-to-use neural networks. The reader will find here an introduction about these networks, an explanatory section about the achievement of Fourier series with adalines, and the full description of an adaline-based selective current compensator. The paper also brings a quick discussion about the use of a feedforward neural network in the current controller of the active filter, as well as simulation and experimental results obtained with the prototype of an active power filter.

  13. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  14. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  15. Carbon additives for electrical double layer capacitor electrodes

    NASA Astrophysics Data System (ADS)

    Weingarth, D.; Cericola, D.; Mornaghini, F. C. F.; Hucke, T.; Kötz, R.

    2014-11-01

    Electrochemical double layer capacitors (EDLCs) are inherently high power devices when compared to rechargeable batteries. While capacitance and energy storage ability are mainly increased by optimizing the electrode active material or the electrolyte, the power capability could be improved by including conductive additives in the electrode formulations. This publication deals with the use of four different carbon additives - two carbon blacks and two graphites - in standard activated carbon based EDLC electrodes. The investigations include: (i) physical characterization of carbon powder mixtures such as surface area, press density, and electrical resistivity measurements, and (ii), electrochemical characterization via impedance spectroscopy and cyclic voltammetry of full cells made with electrodes containing 5 wt.% of carbon additive and compared to cells made with pure activated carbon electrodes in organic electrolyte. Improved cell performance was observed in both impedance and cyclic voltammetry responses. The results are discussed considering the main characteristics of the different carbon additives, and important considerations about electrode structure and processability are drawn.

  16. Concentrating solar thermal power.

    PubMed

    Müller-Steinhagen, Hans

    2013-08-13

    In addition to wind and photovoltaic power, concentrating solar thermal power (CSP) will make a major contribution to electricity provision from renewable energies. Drawing on almost 30 years of operational experience in the multi-megawatt range, CSP is now a proven technology with a reliable cost and performance record. In conjunction with thermal energy storage, electricity can be provided according to demand. To date, solar thermal power plants with a total capacity of 1.3 GW are in operation worldwide, with an additional 2.3 GW under construction and 31.7 GW in advanced planning stage. Depending on the concentration factors, temperatures up to 1000°C can be reached to produce saturated or superheated steam for steam turbine cycles or compressed hot gas for gas turbine cycles. The heat rejected from these thermodynamic cycles can be used for sea water desalination, process heat and centralized provision of chilled water. While electricity generation from CSP plants is still more expensive than from wind turbines or photovoltaic panels, its independence from fluctuations and daily variation of wind speed and solar radiation provides it with a higher value. To become competitive with mid-load electricity from conventional power plants within the next 10-15 years, mass production of components, increased plant size and planning/operating experience will be accompanied by technological innovations. On 30 October 2009, a number of major industrial companies joined forces to establish the so-called DESERTEC Industry Initiative, which aims at providing by 2050 15 per cent of European electricity from renewable energy sources in North Africa, while at the same time securing energy, water, income and employment for this region. Solar thermal power plants are in the heart of this concept.

  17. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  18. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  19. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  20. Theatre fleet's vital additional capacity.

    PubMed

    2012-11-01

    Vanguard Healthcare's fleet of mobile surgical facilities has been deployed to healthcare sites throughout Europe and beyond for over a decade, providing vital additional clinical capacity when existing buildings are refurbished or upgraded, in the event of flood or fire, or simply to help hospitals cater for rising demand. It is a combination of careful planning, teamwork, and the specialist expertise of Vanguard's personnel--many with a clinical background--that ensures not only each unit's successful installation, but equally its subsequent running, servicing, and maintenance, the company explains.

  1. Shale JP-4 Additive Evaluation

    DTIC Science & Technology

    1986-10-01

    8217. •% . , ’ ,,,r ,% . -- - ,.-. ’ ’ 4,w% %’. " - ,’ . . . * ’, .* . TABLE OF CONTENTS .4q ,4 . * SECTION PAGE I. INTRODUCTION 1 II. TEST PARAMETERS 2 1...42 PRECEDING PAGE BLANK TABLE OF CONTENTS (CON’T) SECT ION PAGE V. CONCLUSIONS 44 REFERENCES 46 APPENDIX A Drum to Test Sample Relationship 47 APPENDIX...B.O.C.L.E. Results 40 vii LIST OF TABLES TABLE PAGE 1 Antioxidants 3 2 Raw Shale/Petroleum Fuel Properties 10 3 Drum Sample Additive Content 13 4

  2. Lunar Surface-to-Surface Power Transfer

    NASA Technical Reports Server (NTRS)

    Kerslake, Thomas W.

    2007-01-01

    A human lunar outpost, under NASA study for construction in the 2020's, has potential requirements to transfer electric power up to 50-kW across the lunar surface from 0.1 to 10-km distances. This power would be used to operate surface payloads located remotely from the outpost and/or outpost primary power grid. This paper describes concept designs for state-of-the-art technology power transfer subsystems including AC or DC power via cables, beamed radio frequency power and beamed laser power. Power transfer subsystem mass and performance are calculated and compared for each option. A simplified qualitative assessment of option operations, hazards, costs and technology needs is also described. Based on these concept designs and performance analyses, a DC power cabling subsystem is recommended to minimize subsystem mass and to minimize mission and programmatic costs and risks. Avenues for additional power transfer subsystem studies are recommended.

  3. Additive and Photochemical Manufacturing of Copper

    NASA Astrophysics Data System (ADS)

    Yung, Winco K. C.; Sun, Bo; Meng, Zhengong; Huang, Junfeng; Jin, Yingdi; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

    2016-12-01

    In recent years, 3D printing technologies have been extensively developed, enabling rapid prototyping from a conceptual design to an actual product. However, additive manufacturing of metals in the existing technologies is still cost-intensive and time-consuming. Herein a novel platform for low-cost additive manufacturing is introduced by simultaneously combining the laser-induced forward transfer (LIFT) method with photochemical reaction. Using acrylonitrile butadiene styrene (ABS) polymer as the sacrificial layer, sufficient ejection momentum can be generated in the LIFT method. A low-cost continuous wave (CW) laser diode at 405 nm was utilized and proved to be able to transfer the photochemically synthesized copper onto the target substrate. The wavelength-dependent photochemical behaviour in the LIFT method was verified and characterized by both theoretical and experimental studies compared to 1064 nm fiber laser. The conductivity of the synthesized copper patterns could be enhanced using post electroless plating while retaining the designed pattern shapes. Prototypes of electronic circuits were accordingly built and demonstrated for powering up LEDs. Apart from pristine PDMS materials with low surface energies, the proposed method can simultaneously perform laser-induced forward transfer and photochemical synthesis of metals, starting from their metal oxide forms, onto various target substrates such as polyimide, glass and thermoplastics.

  4. Additive and Photochemical Manufacturing of Copper

    PubMed Central

    Yung, Winco K. C.; Sun, Bo; Meng, Zhengong; Huang, Junfeng; Jin, Yingdi; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

    2016-01-01

    In recent years, 3D printing technologies have been extensively developed, enabling rapid prototyping from a conceptual design to an actual product. However, additive manufacturing of metals in the existing technologies is still cost-intensive and time-consuming. Herein a novel platform for low-cost additive manufacturing is introduced by simultaneously combining the laser-induced forward transfer (LIFT) method with photochemical reaction. Using acrylonitrile butadiene styrene (ABS) polymer as the sacrificial layer, sufficient ejection momentum can be generated in the LIFT method. A low-cost continuous wave (CW) laser diode at 405 nm was utilized and proved to be able to transfer the photochemically synthesized copper onto the target substrate. The wavelength-dependent photochemical behaviour in the LIFT method was verified and characterized by both theoretical and experimental studies compared to 1064 nm fiber laser. The conductivity of the synthesized copper patterns could be enhanced using post electroless plating while retaining the designed pattern shapes. Prototypes of electronic circuits were accordingly built and demonstrated for powering up LEDs. Apart from pristine PDMS materials with low surface energies, the proposed method can simultaneously perform laser-induced forward transfer and photochemical synthesis of metals, starting from their metal oxide forms, onto various target substrates such as polyimide, glass and thermoplastics. PMID:28000733

  5. Additive and Photochemical Manufacturing of Copper.

    PubMed

    Yung, Winco K C; Sun, Bo; Meng, Zhengong; Huang, Junfeng; Jin, Yingdi; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

    2016-12-21

    In recent years, 3D printing technologies have been extensively developed, enabling rapid prototyping from a conceptual design to an actual product. However, additive manufacturing of metals in the existing technologies is still cost-intensive and time-consuming. Herein a novel platform for low-cost additive manufacturing is introduced by simultaneously combining the laser-induced forward transfer (LIFT) method with photochemical reaction. Using acrylonitrile butadiene styrene (ABS) polymer as the sacrificial layer, sufficient ejection momentum can be generated in the LIFT method. A low-cost continuous wave (CW) laser diode at 405 nm was utilized and proved to be able to transfer the photochemically synthesized copper onto the target substrate. The wavelength-dependent photochemical behaviour in the LIFT method was verified and characterized by both theoretical and experimental studies compared to 1064 nm fiber laser. The conductivity of the synthesized copper patterns could be enhanced using post electroless plating while retaining the designed pattern shapes. Prototypes of electronic circuits were accordingly built and demonstrated for powering up LEDs. Apart from pristine PDMS materials with low surface energies, the proposed method can simultaneously perform laser-induced forward transfer and photochemical synthesis of metals, starting from their metal oxide forms, onto various target substrates such as polyimide, glass and thermoplastics.

  6. New ESP additive controls particulates

    SciTech Connect

    Durham, M.D.; Baldrey, K.E.; Bustard, C.J.; Martin, C.E.; Dharmarajan, N.N.

    1997-06-01

    This article reports that a conditioning agent enhanced precipitator performance after plant switched to low-sulfur coal. Firing low-sulfur coal at a power plant designed for medium- or high-sulfur coal will impact the downstream particulate control device. Since the performance of an electro-static precipitator (ESP) is a strong function of the sulfur content in the coal, switching to a low-sulfur coal will severely impact collection efficiency. Particle resistivity is the dominant parameter affecting the performance of an ESP. When the resistivity is too high, the ESP must be increased in size by a factor of two to three, resulting in proportionally increased capital and operating costs. Fly ash from low-sulfur coal is known to have a typical resistivity one or two orders of magnitude above that for ideal collection efficiency in a well-designed ESP. Therefore, when a utility burning a medium- or high-sulfur coal switches to a low-sulfur coal, the increase in particle resistivity resulting from the reduced SO{sub 3} concentration will lead to severe problems in the ESP. There have been many instances where utilities have switched from a high- to a low-sulfur coal, and the problems caused by the increased resistivity have had such a devastating effect on the performance of the ESP that emissions have increased by a factor of 10.

  7. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  8. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  9. Additive interaction between heterogeneous environmental ...

    EPA Pesticide Factsheets

    BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic) using principal component analyses. County-level preterm birth rates (n=3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD) and 95% confidence intervals (CI) comparing worse environmental quality to the better quality for each model for a) each individual domain main effect b) the interaction contrast and c) the two main effects plus interaction effect (i.e. the “net effect”) to show departure from additive interaction for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interac

  10. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  11. Comparison of peak muscle power between Brazilian and French girls.

    PubMed

    Nanci Maria, França; Eric, Doré; Mario, Bedu; Emmanuel, Van Praagh

    2002-01-01

    This study examined the muscle power of Brazilian circumpubertal girls and extended the analysis to a cross-cultural dimension. A total of 462 children, 123 Brazilian girls and 339 French girls, 9-18 years, participated in this investigation. Anthropometric data included body mass (BM), height, skinfold thicknesses, and estimated lean leg volume (LLV). All subjects completed a physical activity questionnaire. Cycling peak power was measured including the flywheel inertia of the device (CPPi). Brazilian girls self-assessed their maturation using pubic hair development. CPPi and optimal velocity (v(opt) = velocity at CPPi) increased with stages of puberty. A multiple stepwise regression with anthropometric variables as explanatory factors showed only LLV and age explaining the variance of CPPi (R2 = 0.40, P < 0.001). Therefore, 60% of the variance of CPPi in Brazilian girls was related to undetermined qualitative individual factors, which may be related to cycling skill. Even when normalized for anthropometric variables, the anaerobic performance (CPPi and v(opt)) of Brazilian girls was significantly lower than a cohort of French girls. The latter demonstrated a high participation in sport and training activities, while 50% of the Brazilian girls had only physical education classes in the form of regular physical activity. Moreover, most of the Brazilian girls demonstrated an ineffective sprint cycling skill. The data suggest that motor learning is an important issue in muscle power assessment and might, therefore, partially explain peak power differences in Brazilian compared with French girls.

  12. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  13. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  14. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  15. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  16. 14 CFR 135.169 - Additional airworthiness requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... airplanes, no person may operate a large airplane unless it meets the additional airworthiness requirements...-engine or turbopropeller-powered small airplane that has a passenger seating configuration, excluding... airplanes intended for use in operations under this part; (3) Before July 19, 1970, in the normal...

  17. 14 CFR 135.169 - Additional airworthiness requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... airplanes, no person may operate a large airplane unless it meets the additional airworthiness requirements...-engine or turbopropeller-powered small airplane that has a passenger seating configuration, excluding... airplanes intended for use in operations under this part; (3) Before July 19, 1970, in the normal...

  18. The Laser Cutter: A Terrific Addition to Your Tech Program

    ERIC Educational Resources Information Center

    Buxton, Richard

    2007-01-01

    A laser cutter has found a very welcome home in the technology program at Thomas Jefferson High School for Science and Technology. It has proven an easy-to-use major addition. Lasers come in different types, sizes and power ratings, which means several things must be taken into consideration when selecting the right one for the technology program.…

  19. Additional Support Needs Reforms and Social Justice in Scotland

    ERIC Educational Resources Information Center

    Riddell, Sheila; Stead, Joan; Weedon, Elisabet; Wright, Kevin

    2010-01-01

    New additional support-needs legislation in Scotland sought to recognise the way in which poverty, as well as individual impairment, contribute to the creation of children's difficulties in learning. As well as identifying a wider range of needs, the legislation sought to provide parents, irrespective of social background, with more powerful means…

  20. 19 CFR 141.37 - Additional requirements for nonresident corporations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... corporations. 141.37 Section 141.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... Additional requirements for nonresident corporations. If a nonresident corporation has not qualified to... authority of the grantor designated to execute the power of attorney on behalf of the corporation....

  1. Adduct Formation in ESI/MS by Mobile Phase Additives

    NASA Astrophysics Data System (ADS)

    Kruve, Anneli; Kaupmees, Karl

    2017-03-01

    Adduct formation is a common ionization method in electrospray ionization mass spectrometry (ESI/MS). However, this process is poorly understood and complicated to control. We demonstrate possibilities to control adduct formation via mobile phase additives in ESI positive mode for 17 oxygen and nitrogen bases. Mobile phase additives were found to be a very effective measure for manipulating the formation efficiencies of adducts. An appropriate choice of additive may increase sensitivity by up to three orders of magnitude. In general, sodium adduct [M + Na]+ and protonated molecule [M + H]+ formation efficiencies were found to be in good correlation; however, the former were significantly more influenced by mobile phase properties. Although the highest formation efficiencies for both species were observed in water/acetonitrile mixtures not containing additives, the repeatability of the formation efficiencies was found to be improved by additives. It is concluded that mobile phase additives are powerful, yet not limiting factors, for altering adduct formation.

  2. Automated load management for spacecraft power systems

    NASA Technical Reports Server (NTRS)

    Lollar, Louis F.

    1987-01-01

    An account is given of the results of a study undertaken by NASA's Marshall Space Flight Center to design and implement the load management techniques for autonomous spacecraft power systems, such as the Autonomously Managed Power System Test Facility. Attention is given to four load-management criteria, which encompass power bus balancing on multichannel power systems, energy balancing in such systems, power quality matching of loads to buses, and contingency load shedding/adding. Full implementation of these criteria calls for the addition of a second power channel.

  3. Long-Term Wind Power Variability

    SciTech Connect

    Wan, Y. H.

    2012-01-01

    The National Renewable Energy Laboratory started collecting wind power data from large commercial wind power plants (WPPs) in southwest Minnesota with dedicated dataloggers and communication links in the spring of 2000. Over the years, additional WPPs in other areas were added to and removed from the data collection effort. The longest data stream of actual wind plant output is more than 10 years. The resulting data have been used to analyze wind power fluctuations, frequency distribution of changes, the effects of spatial diversity, and wind power ancillary services. This report uses the multi-year wind power data to examine long-term wind power variability.

  4. Wind power generation and dispatch in competitive power markets

    NASA Astrophysics Data System (ADS)

    Abreu, Lisias

    Wind energy is currently the fastest growing type of renewable energy. The main motivation is led by more strict emission constraints and higher fuel prices. In addition, recent developments in wind turbine technology and financial incentives have made wind energy technically and economically viable almost anywhere. In restructured power systems, reliable and economical operation of power systems are the two main objectives for the ISO. The ability to control the output of wind turbines is limited and the capacity of a wind farm changes according to wind speeds. Since this type of generation has no production costs, all production is taken by the system. Although, insufficient operational planning of power systems considering wind generation could result in higher system operation costs and off-peak transmission congestions. In addition, a GENCO can participate in short-term power markets in restructured power systems. The goal of a GENCO is to sell energy in such a way that would maximize its profitability. However, due to market price fluctuations and wind forecasting errors, it is essential for the wind GENCO to keep its financial risk at an acceptable level when constituting market bidding strategies. This dissertation discusses assumptions, functions, and methodologies that optimize short-term operations of power systems considering wind energy, and that optimize bidding strategies for wind producers in short-term markets. This dissertation also discusses uncertainties associated with electricity market environment and wind power forecasting that can expose market participants to a significant risk level when managing the tradeoff between profitability and risk.

  5. WISPER: Wirless Space Power Experiment

    NASA Technical Reports Server (NTRS)

    Hawkins, Joseph

    1993-01-01

    The 1993 Advanced Design Project at the University of Alaska Fairbanks was to design a spacecraft as a technology demonstration of wireless power transmission (WPT). With cost effectiveness as a design constraint, a micro-satellite in low earth orbit (LEO) was chosen for the mission. Existing and near term technologies were analyzed and selected for the project. In addition to the conceptual design of the payload, support systems, and structure, the analysis included attention to safety, environmental impact, cost, and schedule for construction and operation. Wireless power beaming is not a new concept. Experimental demonstrations and study efforts have continued since the early 1960's. With the latest progress in transmitter and receiver technology, the next natural step is to beam power from earth to space. This proposed flight demonstration will advance the science of power beaming and prove the viability of various applications of WPT in space. Two methods of power beaming will be examined during the two separate phases of the spacecraft life. The first phase will demonstrate the technology and examine the theory of microwave power transmission at a high frequency. Special aspects of the first phase will include a highly accurate attitude control system and a 14 m inflatable parabolic antenna. The second phase will investigate the utilization of high intensity laser power using modified photovoltaic arrays. Special instrumentation on the spacecraft will measure the conversion efficiency from the received microwave or laser power to direct current power.

  6. Power optics

    SciTech Connect

    Apollonov, V V

    2014-02-28

    By using the theory we developed in the early 1970s, a broad range of phenomena is considered for an optical surface of a solid body that is exposed to radiation arbitrarily varying in time and producing temperature fields, thermoelastic stresses and thermal deformations on the surface layer. The examination is based on the relations (which are similar to Duhamel's integral formula from the theory of heat conduction) between the quantities characterising the thermal stress state in any nonstationary regimes of energy input into a solid. A peculiar feature of the analysis of the thermal stress state in this case consists in the fact that this relation comprises time as a parameter, which in turn is a consequence of incoherence of the quasi-stationary problem of thermoelasticity. This phenomenon is particularly important for the optics of high-power, high-pulse repetition rate lasers, which are being actively developed. In the review, we have recently published in Laser Physics, the thermal stress state of a solid is analysed. In this state, time is treated as an independent variable used in differentiation. Such an approach greatly reduces the applicability of the method. The review published contains data on the use of capillary porous structures made of various materials with different degrees of the surface development. Moreover, such structures can be efficiently employed to increase the heat exchange at a temperature below the boiling point of the coolant. In the present review we discuss the dependences of the limiting laser intensities on the duration of a pulse or a pulse train, corresponding to the three stages of the state of the reflecting surface and leading to unacceptable elastic deformations of the surface, to the plastic yield of the material accompanied by the formation of residual stresses and to the melting of the surface layer. We also analyse the problem of heat exchange in the surface layer with a liquid metal coolant pumped through it. The

  7. POWER REACTOR

    DOEpatents

    Zinn, W.H.

    1958-07-01

    A fast nuclear reactor system ls described for producing power and radioactive isotopes. The reactor core is of the heterogeneous, fluid sealed type comprised of vertically arranged elongated tubular fuel elements having vertical coolant passages. The active portion is surrounded by a neutron reflector and a shield. The system includes pumps and heat exchangers for the primary and secondary coolant circuits. The core, primary coolant pump and primary heat exchanger are disposed within an irapenforate tank which is filled with the primary coolant, in this case a liquid metal such as Na or NaK, to completely submerge these elements. The tank is completely surrounded by a thick walled concrete shield. This reactor system utilizes enriched uranium or plutonium as the fissionable material, uranium or thorium as a diluent and thorium or uranium containing less than 0 7% of the U/sup 235/ isotope as a fertile material.

  8. Power oscillator

    DOEpatents

    Gitsevich, Aleksandr

    2001-01-01

    An oscillator includes an amplifier having an input and an output, and an impedance transformation network connected between the input of the amplifier and the output of the amplifier, wherein the impedance transformation network is configured to provide suitable positive feedback from the output of the amplifier to the input of the amplifier to initiate and sustain an oscillating condition, and wherein the impedance transformation network is configured to protect the input of the amplifier from a destructive feedback signal. One example of the oscillator is a single active element device capable of providing over 70 watts of power at over 70% efficiency. Various control circuits may be employed to match the driving frequency of the oscillator to a plurality of tuning states of the lamp.

  9. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  10. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  11. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  12. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  13. Dynamics of ultrasonic additive manufacturing.

    PubMed

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder.

  14. Dimensionless numbers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  15. Children's understanding of additive concepts.

    PubMed

    Robinson, Katherine M; Dubé, Adam K; Beatch, Jacqueline-Ann

    2017-04-01

    Most research on children's arithmetic concepts is based on one concept at a time, limiting the conclusions that can be made about how children's conceptual knowledge of arithmetic develops. This study examined six arithmetic concepts (identity, negation, commutativity, equivalence, inversion, and addition and subtraction associativity) in Grades 3, 4, and 5. Identity (a-0=a) and negation (a-a=0) were well understood, followed by moderate understanding of commutativity (a+b=b+a) and inversion (a+b-b=a), with weak understanding of equivalence (a+b+c=a+[b+c]) and associativity (a+b-c=[b-c]+a). Understanding increased across grade only for commutativity and equivalence. Four clusters were found: The Weak Concept cluster understood only identity and negation; the Two-Term Concept cluster also understood commutativity; the Inversion Concept cluster understood identity, negation, and inversion; and the Strong Concept cluster had the strongest understanding of all of the concepts. Grade 3 students tended to be in the Weak and Inversion Concept clusters, Grade 4 students were equally likely to be in any of the clusters, and Grade 5 students were most likely to be in the Two-Term and Strong Concept clusters. The findings of this study highlight that conclusions about the development of arithmetic concepts are highly dependent on which concepts are being assessed and underscore the need for multiple concepts to be investigated at the same time.

  16. 7 CFR 1717.603 - RUS approval of extensions and additions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the acquisition or start of construction. (b) Power supply borrowers. Prior written approval by RUS is required for a power supply borrower to extend or add to its electric system if the extension or addition... ELECTRIC LOANS Operational Controls § 1717.603 RUS approval of extensions and additions. (a)...

  17. 7 CFR 1717.603 - RUS approval of extensions and additions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the acquisition or start of construction. (b) Power supply borrowers. Prior written approval by RUS is required for a power supply borrower to extend or add to its electric system if the extension or addition... ELECTRIC LOANS Operational Controls § 1717.603 RUS approval of extensions and additions. (a)...

  18. 7 CFR 1717.603 - RUS approval of extensions and additions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the acquisition or start of construction. (b) Power supply borrowers. Prior written approval by RUS is required for a power supply borrower to extend or add to its electric system if the extension or addition... ELECTRIC LOANS Operational Controls § 1717.603 RUS approval of extensions and additions. (a)...

  19. Lunar nuclear power feasibility study

    NASA Technical Reports Server (NTRS)

    Erdman, C. A.; Tran, T.

    1984-01-01

    Based on review of literature and on limited examination of nuclear power systems now proposed for space applications, a nuclear fission reactor powered system should be seriously considered as the first large (order of 50 kWe or greater) power system to be placed on a lunar base. With relatively minor modifications, the major one being addition of a cooled side shield, the proposed 100 kWe product of the SP-100 Program could be adapted for use on a lunar base.

  20. Green Power Partnership Videos

    EPA Pesticide Factsheets

    The Green Power Partnership develops videos on a regular basis that explore a variety of topics including, Green Power partnership, green power purchasing, Renewable energy certificates, among others.

  1. Microturbine Power Conversion Technology Review

    SciTech Connect

    Staunton, R.H.

    2003-07-21

    In this study, the Oak Ridge National Laboratory (ORNL) is performing a technology review to assess the market for commercially available power electronic converters that can be used to connect microturbines to either the electric grid or local loads. The intent of the review is to facilitate an assessment of the present status of marketed power conversion technology to determine how versatile the designs are for potentially providing different services to the grid based on changes in market direction, new industry standards, and the critical needs of the local service provider. The project includes data gathering efforts and documentation of the state-of-the-art design approaches that are being used by microturbine manufacturers in their power conversion electronics development and refinement. This project task entails a review of power converters used in microturbines sized between 20 kW and 1 MW. The power converters permit microturbine generators, with their non-synchronous, high frequency output, to interface with the grid or local loads. The power converters produce 50- to 60-Hz power that can be used for local loads or, using interface electronics, synchronized for connection to the local feeder and/or microgrid. The power electronics enable operation in a stand-alone mode as a voltage source or in grid-connect mode as a current source. Some microturbines are designed to automatically switch between the two modes. The information obtained in this data gathering effort will provide a basis for determining how close the microturbine industry is to providing services such as voltage regulation, combined control of both voltage and current, fast/seamless mode transfers, enhanced reliability, reduced cost converters, reactive power supply, power quality, and other ancillary services. Some power quality improvements will require the addition of storage devices; therefore, the task should also determine what must be done to enable the power conversion circuits to

  2. Design and fabrication of the progressive addition lenses

    NASA Astrophysics Data System (ADS)

    Qin, Linling; Qian, Lin; Yu, Jingchi

    2011-11-01

    The use of progressive addition lenses (PALs) for the correction of presbyopia has increased dramatically in recent years. These lenses are now being used as the preferred alternative to bifocal and trifocal lenses in many parts of the world. Progressive addition lenses are a kind of opthalmic lenses with freeform surface. The surface curvature of the Progressive addition lenses varies gradually from a minimum value in the upper area, to a maximum value in the lower area. Thus a PAL has a surface with three zones which have very small astigmatism: far-view zone, near-view zone, and intermediate zone. The far view zone and near view zone have relatively constant powers and connected by the intermediate zone with power varies progressively. The design and fabrication technologies of progressive addition lenses have fast progresses because of the massive development of the optical simulation software, multi-axis ultraprecision machining technologies and CNC machining technologies. The design principles of progressive addition lenses are discussed in a historic review. Several kinds of design methods are illustrated, and their advantages and disadvantages are also represented. In the current study, it is shown that the optical characteristics of the different progressive addition lenses designs are significantly different from one another. The different fabrication technologies of Progressive addition lenses are also discussed in the paper. Plastic injection molding and precision-machine turning are the common fabrication technologies for exterior PALs and Interior PALs respectively.

  3. Non-additive and additive genetic effects on extraversion in 3314 Dutch adolescent twins and their parents.

    PubMed

    Rettew, David C; Rebollo-Mesa, Irene; Hudziak, James J; Willemsen, Gonneke; Boomsma, Dorret I

    2008-05-01

    The influence of non-additive genetic influences on personality traits has been increasingly reported in adult populations. Less is known, however, with respect to younger samples. In this study, we examine additive and non-additive genetic contributions to the personality trait of extraversion in 1,689 Dutch twin pairs, 1,505 mothers and 1,637 fathers of the twins. The twins were on average 15.5 years (range 12-18 years). To increase statistical power to detect non-additive genetic influences, data on extraversion were also collected in parents and simultaneously analyzed. Genetic modeling procedures incorporating age as a potential modifier of heritability showed significant influences of additive (20-23%) and non-additive genetic factors (31-33%) in addition to unshared environment (46-48%) for adolescents and for their parents. The additive genetic component was slightly and positively related to age. No significant sex differences were found for either extraversion means or for the magnitude of the genetic and environmental influences. There was no evidence of non-random mating for extraversion in the parental generation. Results show that in addition to additive genetic influences, extraversion in adolescents is influenced by non-additive genetic factors.

  4. Additives In Meat and Poultry Products

    MedlinePlus

    ... What is a food additive? What is a "direct" food additive? What is an 'indirect" food additive? ... convenience foods. [ Top of Page ] What is a “direct” food additive? According to the FDA, “Direct food ...

  5. Nuclear electric power sources

    NASA Technical Reports Server (NTRS)

    Singh, J. J.

    1978-01-01

    Measurements on radioactive commercial p-n junction silicon cells show that these units are capable of delivering several hundred microwatts per curie of Am-241 alpha source, indicating their usefulness in such electronic devices as hearing aids, heart pacemakers, electronic watches, delay timers and nuclear dosimeter chargers. It is concluded that the Am-241 sources are superior to the beta sources used previously, because of higher alpha specific ionization and simultaneous production of low energy photons which are easily converted into photoelectrons for additional power.

  6. Solar-Powered Refrigeration System

    NASA Technical Reports Server (NTRS)

    Ewert, Michael K. (Inventor); Bergeron, David J., III (Inventor)

    2001-01-01

    A solar powered vapor compression refrigeration system is made practicable with thermal storage and novel control techniques. In one embodiment, the refrigeration system includes a photovoltaic panel, a variable speed compressor, an insulated enclosure. and a thermal reservoir. The photovoltaic (PV) panel converts sunlight into DC (direct current) electrical power. The DC electrical power drives a compressor that circulates refrigerant through a vapor compression refrigeration loop to extract heat from the insulated enclosure. The thermal reservoir is situated inside the insulated enclosure and includes a phase change material. As heat is extracted from the insulated enclosure, the phase change material is frozen, and thereafter is able to act as a heat sink to maintain the temperature of the insulated enclosure in the absence of sunlight. The conversion of solar power into stored thermal energy is optimized by a compressor control method that effectively maximizes the compressor's usage of available energy. A capacitor is provided to smooth the power voltage and to provide additional current during compressor start-up. A controller monitors the rate of change of the smoothed power voltage to determine if the compressor is operating below or above the available power maximum, and adjusts the compressor speed accordingly. In this manner, the compressor operation is adjusted to convert substantially all available solar power into stored thermal energy.

  7. Solar-Powered Refrigeration System

    NASA Technical Reports Server (NTRS)

    Ewert, Michael K. (Inventor); Bergeron, David J., III (Inventor)

    2002-01-01

    A solar powered vapor compression refrigeration system is made practicable with thermal storage and novel control techniques. In one embodiment, the refrigeration system includes a photovoltaic panel, a variable speed compressor, an insulated enclosure, and a thermal reservoir. The photovoltaic (PV) panel converts sunlight into DC (direct current) electrical power. The DC electrical power drives a compressor that circulates refrigerant through a vapor compression refrigeration loop to extract heat from the insulated enclosure. The thermal reservoir is situated inside the insulated enclosure and includes a phase change material. As heat is extracted from the insulated enclosure, the phase change material is frozen, and thereafter is able to act as a heat sink to maintain the temperature of the insulated enclosure in the absence of sunlight. The conversion of solar power into stored thermal energy is optimized by a compressor control method that effectively maximizes the compressor's usage of available energy. A capacitor is provided to smooth the power voltage and to provide additional current during compressor start-up. A controller monitors the rate of change of the smoothed power voltage to determine if the compressor is operating below or above the available power maximum, and adjusts the compressor speed accordingly. In this manner, the compressor operation is adjusted to convert substantially all available solar power into stored thermal energy.

  8. Solar-Powered Refrigeration System

    NASA Astrophysics Data System (ADS)

    Ewert, Michael K.; Bergeron, David J., III

    2002-10-01

    A solar powered vapor compression refrigeration system is made practicable with thermal storage and novel control techniques. In one embodiment, the refrigeration system includes a photovoltaic panel, a variable speed compressor, an insulated enclosure, and a thermal reservoir. The photovoltaic (PV) panel converts sunlight into DC (direct current) electrical power. The DC electrical power drives a compressor that circulates refrigerant through a vapor compression refrigeration loop to extract heat from the insulated enclosure. The thermal reservoir is situated inside the insulated enclosure and includes a phase change material. As heat is extracted from the insulated enclosure, the phase change material is frozen, and thereafter is able to act as a heat sink to maintain the temperature of the insulated enclosure in the absence of sunlight. The conversion of solar power into stored thermal energy is optimized by a compressor control method that effectively maximizes the compressor's usage of available energy. A capacitor is provided to smooth the power voltage and to provide additional current during compressor start-up. A controller monitors the rate of change of the smoothed power voltage to determine if the compressor is operating below or above the available power maximum, and adjusts the compressor speed accordingly. In this manner, the compressor operation is adjusted to convert substantially all available solar power into stored thermal energy.

  9. Power and Autistic Traits

    PubMed Central

    Overskeid, Geir

    2016-01-01

    Autistic traits can help people gain and sustain power, and has probably done so throughout history, says the present paper. A number of testable claims follow from this assumption. First, the powerful should have more autistic traits than others – which they do appear to have. Among other things, powerful people, and those with many autistic traits, tend to prefer solitary activities and are often aloof. Moreover, they are often rigid and socially insensitive, low on empathy and with low scores on the trait of agreeableness – and as a rule they do not have many friends. Both groups are also more self-centered than others, more honest, less submissive, more sensitive to slights, and with a stronger tendency to engage in abstract thinking. They tend to behave in bossy or dominant ways, and their moral judgment is more based on rules than on feelings. In addition to experimental evidence, I cite biographies showing that a surprising number of presidents, prime ministers and other powerful people seem to have had traits like those in question – and interestingly, in animals, leaders are often rigid and insensitive to group members’ needs and feelings, mostly acting the way they are themselves inclined to, not responding much to others. Problem solving is important in leadership, and people with many autistic traits appear often to be better thinkers than typical subjects with similar IQs. However, these and other congruities could be coincidences. Hence the question of whether traits the two groups have in common also have a common cause constitutes a strong test of the paper’s thesis – and a common cause does appear to exist, in the form of testosterone’s effects on the central nervous system. Finally, there is evidence that, other things equal, powerful men have more reproductive success than others. If men wielding power do indeed have more autistic traits than those less powerful, this will lead to, other things equal, such traits becoming more

  10. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  11. Additive Layer Manufacturing for Launcher's Applications

    NASA Astrophysics Data System (ADS)

    Vilanova, J.; Romera, P.; Lasagni, F.; Zorrilla, A.; Perinan, A.

    2014-06-01

    In the next years the European space industry has the challenge of maintaining its competitiveness in launch vehicles (LV) production, due to the growth of competition worldwide. It has to assure its position developing new applied technologies. In this field the effort is focussed on the production of short series of customized products, like payloads, flight components or launcher parts. ALM (Additive Layer Manufacturing) could be a powerful tool that offers new competitiveness factors for this industry, comprising a set of emerging technologies that are becoming a competitor to forming, casting and machining as well as being utilised directly as a complementary alternative.Originally used for prototypes and models, now ALM becomes a very useful technology capable to fabricate functional parts for the space industrial sector. Its demands on rapid technologies are different to "earth" industries, and they aren't so easily satisfied because space is a field with different requirements depending on its application: launchers, reusable vehicles, satellites, probes, low gravity researches, manned spacecraft, or even moon and planetary exploration.This paper reports on the ALM potential applications, under ESA requirements, exploring the challenges and possibilities for its use in the launchers market, trying to answer two basic questions: the first one, whether ALM is a mature technology to be ready for its use as flight hardware; and the second one, if it can be used to reduce the product cycle, and consequently, the development, production and operational costs.

  12. A low power on-chip class-E power amplifier for remotely powered implantable sensor systems

    NASA Astrophysics Data System (ADS)

    Ture, Kerim; Kilinc, Enver G.; Dehollain, Catherine

    2015-06-01

    This paper presents a low power fully integrated class-E power amplifier and its integration with remotely powered sensor system. The class-E power amplifier is suitable solution for low-power applications due to its high power efficiency. However, the required high inductance values which make the on-chip integration of the power amplifier difficult. The designed power amplifier is fully integrated in the remotely powered sensor system and fabricated in 0.18 μm CMOS process. The power is transferred to the implantable sensor system at 13.56 MHz by using an inductively coupled remote powering link. The induced AC voltage on the implant coil is converted into a DC voltage by a passive full-wave rectifier. A voltage regulator is used to suppress the ripples and create a clean and stable 1.8 V supply voltage for the sensor and communication blocks. The data collected from the sensors is transmitted by on-off keying modulated low-power transmitter at 1.2 GHz frequency. The transmitter is composed of a LC tank oscillator and a fully on-chip class-E power amplifier. An additional output network is used for the power amplifier which makes the integration of the power amplifier fully on-chip. The integrated power amplifier with 0.2 V supply voltage has a drain efficiency of 31.5% at -10 dBm output power for 50 Ω load. The measurement results verify the functionality of the power amplifier and the remotely powered implantable sensor system. The data communication is also verified by using a commercial 50 Ω chip antenna and has 600 kbps data rate at 1 m communication distance.

  13. Multi-port power router and its impact on resilient power grid systems

    NASA Astrophysics Data System (ADS)

    Kado, Yuichi; Iwatsuki, Katsumi; Wada, Keiji

    2016-02-01

    We propose a Y-configuration power router as a unit cell to easily construct a power delivery system that can meet many types of user requirements. The Y-configuration power router controls the direction and magnitude of power flow among three ports regardless of DC and AC. We constructed a prototype three-way isolated DC/DC converter that is the core unit of the Y-configuration power router and tested the power flow control operation. Experimental results revealed that our methodology based on the governing equation was appropriate for the power flow control of the three-way DC/DC converter. In addition, the hexagonal distribution network composed of the power routers has the ability to easily interchange electric power between autonomous microgrid cells. We also explored the requirements for communication between energy routers to achieve dynamic adjustments of energy flow in a coordinated manner and its impact on resilient power grid systems.

  14. Women, Power, and Libraries.

    ERIC Educational Resources Information Center

    Schuman, Patricia Glass

    1984-01-01

    Discusses the concept of power in the context of women and the library profession, citing views of power by Max Weber, John Kenneth Galbraith, Letty Cottin Pogrebin, and Rosabeth Moss Kantor. Male power and female submission, defining power, organizing for power, and sharing power are highlighted. A 12-item bibliography is included. (EJS)

  15. The effect of job insecurity on employee health complaints: A within-person analysis of the explanatory role of threats to the manifest and latent benefits of work.

    PubMed

    Vander Elst, Tinne; Näswall, Katharina; Bernhard-Oettel, Claudia; De Witte, Hans; Sverke, Magnus

    2016-01-01

    The current study contributes to the literature on job insecurity by highlighting threat to the benefits of work as an explanation of the effect of job insecurity on health complaints. Building on the latent deprivation model, we predicted that threats to both manifest (i.e., financial income) and latent benefits of work (i.e., collective purpose, social contacts, status, time structure, activity) mediate the relationships from job insecurity to subsequent mental and physical health complaints. In addition, in line with the conservation of resources theory, we proposed that financial resources buffer the indirect effect of job insecurity on health complaints through threat to the manifest benefit. Hypotheses were tested using a multilevel design, in which 3 measurements (time lag of 6 months between subsequent measurements) were clustered within 1,994 employees (in Flanders, Belgium). This allowed for the investigation of within-person processes, while controlling for variance at the between-person level. The results demonstrate that job insecurity was related to subsequent threats to both manifest and latent benefits, and that these threats in turn were related to subsequent health complaints (with an exception for threat to the manifest benefit that did not predict mental health complaints). Three significant indirect effects were found: threat to the latent benefits mediated the relationships between job insecurity and both mental and physical health complaints, and threat to the manifest benefit mediated the relationship between job insecurity and physical health complaints. Unexpectedly, the latter indirect effect was exacerbated by financial resources.

  16. Exponentiated power Lindley distribution.

    PubMed

    Ashour, Samir K; Eltehiwy, Mahmoud A

    2015-11-01

    A new generalization of the Lindley distribution is recently proposed by Ghitany et al. [1], called as the power Lindley distribution. Another generalization of the Lindley distribution was introduced by Nadarajah et al. [2], named as the generalized Lindley distribution. This paper proposes a more generalization of the Lindley distribution which generalizes the two. We refer to this new generalization as the exponentiated power Lindley distribution. The new distribution is important since it contains as special sub-models some widely well-known distributions in addition to the above two models, such as the Lindley distribution among many others. It also provides more flexibility to analyze complex real data sets. We study some statistical properties for the new distribution. We discuss maximum likelihood estimation of the distribution parameters. Least square estimation is used to evaluate the parameters. Three algorithms are proposed for generating random data from the proposed distribution. An application of the model to a real data set is analyzed using the new distribution, which shows that the exponentiated power Lindley distribution can be used quite effectively in analyzing real lifetime data.

  17. Exponentiated power Lindley distribution

    PubMed Central

    Ashour, Samir K.; Eltehiwy, Mahmoud A.

    2014-01-01

    A new generalization of the Lindley distribution is recently proposed by Ghitany et al. [1], called as the power Lindley distribution. Another generalization of the Lindley distribution was introduced by Nadarajah et al. [2], named as the generalized Lindley distribution. This paper proposes a more generalization of the Lindley distribution which generalizes the two. We refer to this new generalization as the exponentiated power Lindley distribution. The new distribution is important since it contains as special sub-models some widely well-known distributions in addition to the above two models, such as the Lindley distribution among many others. It also provides more flexibility to analyze complex real data sets. We study some statistical properties for the new distribution. We discuss maximum likelihood estimation of the distribution parameters. Least square estimation is used to evaluate the parameters. Three algorithms are proposed for generating random data from the proposed distribution. An application of the model to a real data set is analyzed using the new distribution, which shows that the exponentiated power Lindley distribution can be used quite effectively in analyzing real lifetime data. PMID:26644927

  18. An analysis of power beaming for the Moon and Mars

    NASA Technical Reports Server (NTRS)

    Stavnes, Mark W.

    1992-01-01

    Operations on the surface of the Moon and Mars will depend on a reliable source of electrical power. At NASA Lewis Research Center, the feasibility of powering lunar and Martian surface sites by power beaming was studied. Constellations of nuclear or solar powered satellites using microwave or laser transmitters were designed to power an equatorial surface base. Additional surface assets, such as rovers, can also be powered from the same orbiting satellites, requiring only the additional mass of a receiver. However, the actual mass and power capabilities of the system are dependent on the location of the surface receiver. The masses of the beam power systems can be reduced by up to 50 percent, by using the power source of an electric propulsion vehicle to power the beam system. The important analyses results and any additional issues that remain unresolved are discussed.

  19. Low Power Transceiver

    NASA Technical Reports Server (NTRS)

    2002-01-01

    One of the FREESTAR experiments, the Low Power Transceiver (LPT) experiment is a low-power, lightweight software programmable transceiver prototype technology demonstration that is being developed by NASA as a low-cost S-band spacecraft navigation and communication device. The LPT prototype receives Global Positioning System (GPS) satellite signals for spacecraft navigation support and provides both forward and return, low-rate data communications links to the Merritt Island (MILA) and Dryden Flight Research Facility (DFRC) ground stations and to the Tracking and Data Relay Satellite System (TDRSS). The experiment is designed to demonstrate the system's ability to do simultaneous communications and navigation, as well as multi-mode communications and reconfiguration. LPT is managed by NASA's Goddard Space Flight Center and sponsored by NASA/HQ Code M. The LPT experiment consists of one thermally conductive box containing the electronics stack, three S-band antennas and one L-band antenna. The LPT payload uses general Orbiter services, including power control, command, and telemetry provided through the HHC avionics. On-orbit, the LPT payload will be primarily operated via direct communications between LPT and ground stations (MILA, WLPS, or DFRC) and/or TDRSS, with backup command and telemetry capability provided via the hitchhiker avionics and remote Payload Operations Control Center. During operations, LPT will utilize high Sband frequencies for communications. The LPT TDRSS (and GN) forward link (uplink) frequency is 2106.40625 MHz and their TDRSS (and GN) return link (downlink) frequency is 2287.5 MHz (utilizing Left-handed Circular Polarization to work with the TDRSS MA system). Two standard switch panel switches will be utilized to prohibit inadvertent operation of the antenna. An additional inhibit will be provided through the HH avionics power relay to the LPT.

  20. Village Power `97. Proceedings

    SciTech Connect

    Cardinal, J.; Flowers, L.; Taylor, R.; Weingart, J.

    1997-09-01

    It is estimated that two billion people live without electricity and its services. In addition, there is a sizable number of rural villages that have limited electrical service, with either part-day operation by diesel gen-sets or partial electrification (local school or community center and several nearby houses). For many villages connected to the grid, power is often sporadically available and of poor quality. The U.S. National Renewable Energy Laboratory (NREL) in Golden, Colorado, has initiated a program to address these potential electricity opportunities in rural villages through the application of renewable energy (RE) technologies. The objective of this program is to develop and implement applications that demonstrate the technical performance, economic competitiveness, operational viability, and environmental benefits of renewable rural electric solutions, compared to the conventional options of line extension and isolated diesel mini-grids. These four attributes foster sustainability; therefore, the program is entitled Renewables for Sustainable Village Power (RSVP). The RSVP program is a multi-disciplinary, multi-technology, multi-application program composed of six key activities, including village application development, computer model development, systems analysis, pilot project development, technical assistance, and an Internet-based village power project database. The current program emphasizes wind, photovoltaics (PV), and their hybrids with diesel gen-sets. NREL`s RSVP team is currently involved in rural electricity projects in thirteen countries, with U.S., foreign, and internationally based agencies and institutions. This document contains reports presented at the Proceedings of Village Power, 1997. Individual projects have been processed separately for the United States Department of Energy databases.