Science.gov

Sample records for additional factors including

  1. Photoactive devices including porphyrinoids with coordinating additives

    DOEpatents

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  2. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    NASA Technical Reports Server (NTRS)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  3. 14 CFR 1203.406 - Additional classification factors.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Additional classification factors. 1203.406... PROGRAM Guides for Original Classification § 1203.406 Additional classification factors. In determining the appropriate classification category, the following additional factors should be considered:...

  4. 14 CFR 1203.406 - Additional classification factors.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Additional classification factors. 1203.406 Section 1203.406 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION INFORMATION SECURITY PROGRAM Guides for Original Classification § 1203.406 Additional classification factors. In...

  5. 14 CFR 1203.406 - Additional classification factors.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Additional classification factors. 1203.406 Section 1203.406 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION INFORMATION SECURITY PROGRAM Guides for Original Classification § 1203.406 Additional classification factors. In...

  6. 14 CFR 1203.406 - Additional classification factors.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Additional classification factors. 1203.406 Section 1203.406 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION INFORMATION SECURITY PROGRAM Guides for Original Classification § 1203.406 Additional classification factors. In...

  7. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  8. 14 CFR § 1203.406 - Additional classification factors.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Additional classification factors. § 1203.406 Section § 1203.406 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION INFORMATION SECURITY PROGRAM Guides for Original Classification § 1203.406 Additional classification...

  9. Additional records of metazoan parasites from Caribbean marine mammals, including genetically identified anisakid nematodes.

    PubMed

    Colón-Llavina, Marlene M; Mignucci-Giannoni, Antonio A; Mattiucci, Simonetta; Paoletti, Michela; Nascetti, Giuseppe; Williams, Ernest H

    2009-10-01

    Studies of marine mammal parasites in the Caribbean are scarce. An assessment for marine mammal endo- and ectoparasites from Puerto Rico and the Virgin Islands, but extending to other areas of the Caribbean, was conducted between 1989 and 1994. The present study complements the latter and enhances identification of anisakid nematodes using molecular markers. Parasites were collected from 59 carcasses of stranded cetaceans and manatees from 1994 to 2006, including Globicephala macrorhynchus, Kogia breviceps, Kogia sima, Lagenodelphis hosei, Mesoplodon densirostris, Peponocephala electra, Stenella longirostris, Steno bredanensis, Trichechus manatus. Tursiops truncatus, and Ziphius cavirostris. Sixteen species of endoparasitic helminthes were morphologically identified, including two species of acanthocephalans (Bolbosoma capitatum, Bolbosoma vasculosum), nine species of nematodes (Anisakis sp., Anisakis brevispiculata, Anisakis paggiae, Anisakis simplex, Anisakis typica, Anisakis ziphidarium, Crassicauda anthonyi, Heterocheilus tunicatus, Pseudoterranova ceticola), two species of cestodes (Monorygma grimaldi, Phyllobothrium delphini), and three species of trematodes (Chiorchis groschafti, Pulmonicola cochleotrema, Monoligerum blairi). The nematodes belonging to the genus Anisakis recovered in some stranded animals were genetically identified to species level based on their sequence analysis of mitochondrial DNA (629 bp of mtDNA cox 2). A total of five new host records and six new geographic records are presented. PMID:19582477

  10. Additional records of metazoan parasites from Caribbean marine mammals, including genetically identified anisakid nematodes.

    PubMed

    Colón-Llavina, Marlene M; Mignucci-Giannoni, Antonio A; Mattiucci, Simonetta; Paoletti, Michela; Nascetti, Giuseppe; Williams, Ernest H

    2009-10-01

    Studies of marine mammal parasites in the Caribbean are scarce. An assessment for marine mammal endo- and ectoparasites from Puerto Rico and the Virgin Islands, but extending to other areas of the Caribbean, was conducted between 1989 and 1994. The present study complements the latter and enhances identification of anisakid nematodes using molecular markers. Parasites were collected from 59 carcasses of stranded cetaceans and manatees from 1994 to 2006, including Globicephala macrorhynchus, Kogia breviceps, Kogia sima, Lagenodelphis hosei, Mesoplodon densirostris, Peponocephala electra, Stenella longirostris, Steno bredanensis, Trichechus manatus. Tursiops truncatus, and Ziphius cavirostris. Sixteen species of endoparasitic helminthes were morphologically identified, including two species of acanthocephalans (Bolbosoma capitatum, Bolbosoma vasculosum), nine species of nematodes (Anisakis sp., Anisakis brevispiculata, Anisakis paggiae, Anisakis simplex, Anisakis typica, Anisakis ziphidarium, Crassicauda anthonyi, Heterocheilus tunicatus, Pseudoterranova ceticola), two species of cestodes (Monorygma grimaldi, Phyllobothrium delphini), and three species of trematodes (Chiorchis groschafti, Pulmonicola cochleotrema, Monoligerum blairi). The nematodes belonging to the genus Anisakis recovered in some stranded animals were genetically identified to species level based on their sequence analysis of mitochondrial DNA (629 bp of mtDNA cox 2). A total of five new host records and six new geographic records are presented.

  11. DNA Damage Response Factors from Diverse Pathways, Including DNA Crosslink Repair, Mediate Alternative End Joining

    PubMed Central

    Howard, Sean M.; Yanez, Diana A.; Stark, Jeremy M.

    2015-01-01

    Alternative end joining (Alt-EJ) chromosomal break repair involves bypassing classical non-homologous end joining (c-NHEJ), and such repair causes mutations often with microhomology at the repair junction. Since the mediators of Alt-EJ are not well understood, we have sought to identify DNA damage response (DDR) factors important for this repair event. Using chromosomal break reporter assays, we surveyed an RNAi library targeting known DDR factors for siRNAs that cause a specific decrease in Alt-EJ, relative to an EJ event that is a composite of Alt-EJ and c-NHEJ (Distal-EJ between two tandem breaks). From this analysis, we identified several DDR factors that are specifically important for Alt-EJ relative to Distal-EJ. While these factors are from diverse pathways, we also found that most of them also promote homologous recombination (HR), including factors important for DNA crosslink repair, such as the Fanconi Anemia factor, FANCA. Since bypass of c-NHEJ is likely important for both Alt-EJ and HR, we disrupted the c-NHEJ factor Ku70 in Fanca-deficient mouse cells and found that Ku70 loss significantly diminishes the influence of Fanca on Alt-EJ. In contrast, an inhibitor of poly ADP-ribose polymerase (PARP) causes a decrease in Alt-EJ that is enhanced by Ku70 loss. Additionally, the helicase/nuclease DNA2 appears to have distinct effects from FANCA and PARP on both Alt-EJ, as well as end resection. Finally, we found that the proteasome inhibitor Bortezomib, a cancer therapeutic that has been shown to disrupt FANC signaling, causes a significant reduction in both Alt-EJ and HR, relative to Distal-EJ, as well as a substantial loss of end resection. We suggest that several distinct DDR functions are important for Alt-EJ, which include promoting bypass of c-NHEJ and end resection. PMID:25629353

  12. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Petitions to amend 40 CFR part 273 to include additional hazardous wastes. 260.23 Section 260.23 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  13. 78 FR 67369 - National Vaccine Injury Compensation Program: Addition to the Vaccine Injury Table to Include All...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... the category for new vaccines on the Table. See 70 FR 19092. Subsequently, the Secretary engaged in...). See 76 FR 36367. Since that time, quadrivalent influenza vaccines (meaning that they contain four...: Addition to the Vaccine Injury Table to Include All Vaccines Against Seasonal Influenza AGENCY:...

  14. 77 FR 1073 - Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-09

    ... HUMAN SERVICES Food and Drug Administration Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses to an Existing System of Records; Bioresearch Monitoring Information System AGENCY: Food and Drug Administration, HHS. ACTION: Notice of an altered system of records....

  15. Z' factor including siRNA design quality parameter in RNAi screening experiments.

    PubMed

    Mazur, Sławomir; Kozak, Karol

    2012-05-01

    RNA interference (RNAi) high-content screening (HCS) enables massive parallel gene silencing and is increasingly being used to reveal novel connections between genes and disease-relevant phenotypes. The application of genome-scale RNAi relies on the development of high quality HCS assays. The Z' factor statistic provides a way to evaluate whether or not screening run conditions (reagents, protocols, instrumentation, kinetics, and other conditions not directly related to the test compounds) are optimized. Z' factor, introduced by Zhang et al., ( 1) is a dimensionless value that represents both the variability and the dynamic range between two sets of sample control data. This paper describe a new extension of the Z' factor, which integrates bioinformatics RNAi non-target compounds for screening quality assessment. Currently presented Z' factor is based on positive and negative control, which may not be sufficient for RNAi experiments including oligonucleotides (oligo) with lack of knock-down. This paper proposes an algorithm which extends existing algorithm by using additional controls generetaed from on-target analysis.

  16. Major histocompatibility complex harbors widespread genotypic variability of non-additive risk of rheumatoid arthritis including epistasis

    PubMed Central

    Wei, Wen-Hua; Bowes, John; Plant, Darren; Viatte, Sebastien; Yarwood, Annie; Massey, Jonathan; Worthington, Jane; Eyre, Stephen

    2016-01-01

    Genotypic variability based genome-wide association studies (vGWASs) can identify potentially interacting loci without prior knowledge of the interacting factors. We report a two-stage approach to make vGWAS applicable to diseases: firstly using a mixed model approach to partition dichotomous phenotypes into additive risk and non-additive environmental residuals on the liability scale and secondly using the Levene’s (Brown-Forsythe) test to assess equality of the residual variances across genotype groups per marker. We found widespread significant (P < 2.5e-05) vGWAS signals within the major histocompatibility complex (MHC) across all three study cohorts of rheumatoid arthritis. We further identified 10 epistatic interactions between the vGWAS signals independent of the MHC additive effects, each with a weak effect but jointly explained 1.9% of phenotypic variance. PTPN22 was also identified in the discovery cohort but replicated in only one independent cohort. Combining the three cohorts boosted power of vGWAS and additionally identified TYK2 and ANKRD55. Both PTPN22 and TYK2 had evidence of interactions reported elsewhere. We conclude that vGWAS can help discover interacting loci for complex diseases but require large samples to find additional signals. PMID:27109064

  17. AP-42 ADDITIONS AND REVISIONS - TRANSPORTABILITY FACTORS FOR FUGITIVE DUST

    EPA Science Inventory

    The product is a table of factors, one for each county in the US, reflecting the portion of fugitive dust removed very close to the source via impaction on vegetation and similar mechanisms. Factors were based on land cover in area (county or grid cell) A praft final product was...

  18. Isolation of an additional member of the fibroblast growth factor receptor family, FGFR-3.

    PubMed Central

    Keegan, K; Johnson, D E; Williams, L T; Hayman, M J

    1991-01-01

    The fibroblast growth factors are a family of polypeptide growth factors involved in a variety of activities including mitogenesis, angiogenesis, and wound healing. Fibroblast growth factor receptors (FGFRs) have previously been identified in chicken, mouse, and human and have been shown to contain an extracellular domain with either two or three immunoglobulin-like domains, a transmembrane domain, and a cytoplasmic tyrosine kinase domain. We have isolated a human cDNA for another tyrosine kinase receptor that is highly homologous to the previously described FGFR. Expression of this receptor cDNA in COS cells directs the expression of a 125-kDa glycoprotein. We demonstrate that this cDNA encodes a biologically active receptor by showing that human acidic and basic fibroblast growth factors activate this receptor as measured by 45Ca2+ efflux assays. These data establish the existence of an additional member of the FGFR family that we have named FGFR-3. Images PMID:1847508

  19. Analytical expressions for the gate utilization factors of passive multiplicity counters including signal build-up

    SciTech Connect

    Croft, Stephen; Evans, Louise G; Schear, Melissa A

    2010-01-01

    In the realm of nuclear safeguards, passive neutron multiplicity counting using shift register pulse train analysis to nondestructively quantify Pu in product materials is a familiar and widely applied technique. The approach most commonly taken is to construct a neutron detector consisting of {sup 3}He filled cylindrical proportional counters embedded in a high density polyethylene moderator. Fast neutrons from the item enter the moderator and are quickly slowed down, on timescales of the order of 1-2 {micro}s, creating a thermal population which then persists typically for several 10's {micro}s and is sampled by the {sup 3}He detectors. Because the initial transient is of comparatively short duration it has been traditional to treat it as instantaneous and furthermore to approximate the subsequent capture time distribution as exponential in shape. With these approximations simple expressions for the various Gate Utilization Factors (GUFs) can be obtained. These factors represent the proportion of time correlated events i.e. Doubles and Triples signal present in the pulse train that is detected by the coincidence gate structure chosen (predelay and gate width settings of the multiplicity shift register). More complicated expressions can be derived by generalizing the capture time distribution to multiple time components or harmonics typically present in real systems. When it comes to applying passive neutron multiplicity methods to extremely intense (i.e. high emission rate and highly multiplying) neutron sources there is a drive to use detector types with very fast response characteristics in order to cope with the high rates. In addition to short pulse width, detectors with a short capture time profile are also desirable so that a short coincidence gate width can be set in order to reduce the chance or Accidental coincidence signal. In extreme cases, such as might be realized using boron loaded scintillators, the dieaway time may be so short that the build

  20. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  1. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  2. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  3. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  4. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  5. A Study of Factors Promoting Success in Computer Science Including Gender Differences

    NASA Astrophysics Data System (ADS)

    Cantwell Wilson, Brenda

    2002-03-01

    This study was conducted to determine factors that promote success in an introductory college computer science course and to determine what, if any, differences appear between genders on those factors. The model included math background, attribution for success/failure, self-efficacy, encouragement, comfort level in the course, work style preference, previous programming experience, previous non-programming computer experience, and gender as possible predictive factors for success in the computer science course. Subjects included 105 students enrolled in an introductory computer science course. The study revealed three predictive factors in the following order of importance: comfort level (with a positive influence), math background (with a positive influence), and attribution to luck (with a negative influence). No significant gender differences were found in these three factors. The study also revealed that both a formal class in programming (which had a positive correlation) and game playing (which had a negative correlation) were predictive of success. The study revealed a significant gender difference in game playing with males reporting more experience with playing games on the computer than females reported.

  6. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  7. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  8. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  9. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  10. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  11. Factors which Limit the Value of Additional Redundancy in Human Rated Launch Vehicle Systems

    NASA Technical Reports Server (NTRS)

    Anderson, Joel M.; Stott, James E.; Ring, Robert W.; Hatfield, Spencer; Kaltz, Gregory M.

    2008-01-01

    The National Aeronautics and Space Administration (NASA) has embarked on an ambitious program to return humans to the moon and beyond. As NASA moves forward in the development and design of new launch vehicles for future space exploration, it must fully consider the implications that rule-based requirements of redundancy or fault tolerance have on system reliability/risk. These considerations include common cause failure, increased system complexity, combined serial and parallel configurations, and the impact of design features implemented to control premature activation. These factors and others must be considered in trade studies to support design decisions that balance safety, reliability, performance and system complexity to achieve a relatively simple, operable system that provides the safest and most reliable system within the specified performance requirements. This paper describes conditions under which additional functional redundancy can impede improved system reliability. Examples from current NASA programs including the Ares I Upper Stage will be shown.

  12. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    During the summer and fall of 1977, 533 water and 1226 sediment samples were collected from 1740 locations within the 18,000 km/sup 2/ area of the Newcastle quadrangle, Wyoming. Water samples were collected from wells and springs; sediment samples were collected from stream channels and from springs. Each water sample was analyzed for uranium, and each sediment sample was analyzed for 43 elements, including uranium and thorium. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations (>20 ppB) generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District.

  13. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  14. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  15. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS Quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    Water and sediment samples were collected and each water sample was analyzed for U, and each sediment sample was analyzed for 43 elements, including U and Th. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District. Uranium concentrations in sediment samples range from 1.14 to 220.70 ppM and have a median of 3.37 ppM and a mean of 4.03 ppM. Throughout the major uranium mining districts of the Powder River Basin, sediment samples with high uranium concentrations were collected from dry streams located near wells producing water samples with high uranium concentrations. High uranium concentrations were also found associated with the Lance Creek oil field where uranium mineralization is known in the White River formation. High uranium concentrations were also found in sediment samples in areas where uranium mineralization is not known. These samples are from dry streams in areas underlain by the White River formation, the Niobrara formation, and the Pierre, Carlisle, Belle Fourche, and Mowry shales.

  16. Three WRKY transcription factors additively repress abscisic acid and gibberellin signaling in aleurone cells.

    PubMed

    Zhang, Liyuan; Gu, Lingkun; Ringler, Patricia; Smith, Stanley; Rushton, Paul J; Shen, Qingxi J

    2015-07-01

    Members of the WRKY transcription factor superfamily are essential for the regulation of many plant pathways. Functional redundancy due to duplications of WRKY transcription factors, however, complicates genetic analysis by allowing single-mutant plants to maintain wild-type phenotypes. Our analyses indicate that three group I WRKY genes, OsWRKY24, -53, and -70, act in a partially redundant manner. All three showed characteristics of typical WRKY transcription factors: each localized to nuclei and yeast one-hybrid assays indicated that they all bind to W-boxes, including those present in their own promoters. Quantitative real time-PCR (qRT-PCR) analyses indicated that the expression levels of the three WRKY genes varied in the different tissues tested. Particle bombardment-mediated transient expression analyses indicated that all three genes repress the GA and ABA signaling in a dosage-dependent manner. Combination of all three WRKY genes showed additive antagonism of ABA and GA signaling. These results suggest that these WRKY proteins function as negative transcriptional regulators of GA and ABA signaling. However, different combinations of these WRKY genes can lead to varied strengths in suppression of their targets.

  17. 17p13.3 microduplication including CRK leads to overgrowth and elevated growth factors: A case report.

    PubMed

    Henry, Rohan K; Astbury, Caroline; Stratakis, Constantine A; Hickey, Scott E

    2016-10-01

    17p13.3 microduplications classified as class I duplications involving YWHAE but not PAFAH1B1 (formerly LIS1) and class II duplications which extend to involve PAFAH1B1, are associated with diverse phenotypes including intellectual disability and structural brain malformations. We report a girl with an approximately 1.58 Mb apparently terminal gain of 17p13.3, which contains more than 20 genes including the YWHAE and CRK genes (OMIM: 164762). She had increased growth factors accompanied by pathologic tall stature. In addition to these, she developed central precocious puberty at 7 years old. In individuals with class I 17p13.3 microduplications including CRK, we recommend biochemical evaluation of the growth hormone axis. Providers caring for these patients should be aware of their possible risk for the development of central precocious puberty. PMID:27633569

  18. 34 CFR 377.22 - What additional factors does the Secretary consider in making grants?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROJECTS TO INCREASE CLIENT CHOICE PROGRAM How Does the Secretary Make an Award? § 377.22 What additional factors does the Secretary consider in making grants? In addition to the criteria in § 377.21, the... strategies to increase client choice, in order to ensure that a variety of approaches are demonstrated...

  19. Telehealth among US hospitals: several factors, including state reimbursement and licensure policies, influence adoption.

    PubMed

    Adler-Milstein, Julia; Kvedar, Joseph; Bates, David W

    2014-02-01

    Telehealth is widely believed to hold great potential to improve access to, and increase the value of, health care. Gaining a better understanding of why some hospitals adopt telehealth technologies while others do not is critically important. We examined factors associated with telehealth adoption among US hospitals. Data from the Information Technology Supplement to the American Hospital Association's 2012 annual survey of acute care hospitals show that 42 percent of US hospitals have telehealth capabilities. Hospitals more likely to have telehealth capabilities are teaching hospitals, those equipped with additional advanced medical technology, those that are members of a larger system, and those that are nonprofit institutions. Rates of hospital telehealth adoption by state vary substantially and are associated with differences in state policy. Policies that promote private payer reimbursement for telehealth are associated with greater likelihood of telehealth adoption, while policies that require out-of-state providers to have a special license to provide telehealth services reduce the likelihood of adoption. Our findings suggest steps that policy makers can take to achieve greater adoption of telehealth by hospitals.

  20. A decision support system prototype including human factors based on the TOGA meta-theory approach

    SciTech Connect

    Cappelli, M.; Memmi, F.; Gadomski, A. M.; Sepielli, M.

    2012-07-01

    The human contribution to the risk of operation of complex technological systems is often not negligible and sometimes tends to become significant, as shown by many reports on incidents and accidents occurred in the past inside Nuclear Power Plants (NPPs). An error of a human operator of a NPP can derive by both omission and commission. For instance, complex commission errors can also lead to significant catastrophic technological accidents, as for the case of the Three Mile Island accident. Typically, the problem is analyzed by focusing on the single event chain that has provoked the incident or accident. What is needed is a general framework able to include as many parameters as possible, i.e. both technological and human factors. Such a general model could allow to envisage an omission or commission error before it can happen or, alternatively, suggest preferred actions to do in order to take countermeasures to neutralize the effect of the error before it becomes critical. In this paper, a preliminary Decision Support System (DSS) based on the so-called (-) TOGA meta-theory approach is presented. The application of such a theory to the management of nuclear power plants has been presented in the previous ICAPP 2011. Here, a human factor simulator prototype is proposed in order to include the effect of human errors in the decision path. The DSS has been developed using a TRIGA research reactor as reference plant, and implemented using the LabVIEW programming environment and the Finite State Machine (FSM) model The proposed DSS shows how to apply the Universal Reasoning Paradigm (URP) and the Universal Management Paradigm (UMP) to a real plant context. The DSS receives inputs from instrumentation data and gives as output a suggested decision. It is obtained as the result of an internal elaborating process based on a performance function. The latter, describes the degree of satisfaction and efficiency, which are dependent on the level of responsibility related to

  1. Drug-induced lupus: Including anti-tumour necrosis factor and interferon induced.

    PubMed

    Araújo-Fernández, S; Ahijón-Lana, M; Isenberg, D A

    2014-05-01

    Drug-induced lupus erythematosus is defined as a syndrome with clinical and serological features similar to systemic lupus erythematosus that is temporally related to continuous drug exposure and which resolves after discontinuation of this drug. More than 90 drugs, including biological modulators such as tumour necrosis factor-α inhibitors and interferons, have been identified as likely 'culprits'. While there are no standard diagnostic criteria for drug-induced lupus erythematosus, guidelines that can help to distinguish drug-induced lupus erythematosus from systemic lupus erythematosus have been proposed and several different patterns of drug-induced lupus erythematosus are emerging. Distinguishing drug-induced lupus erythematosus from systemic lupus erythematosus is important because the prognosis of drug-induced lupus erythematosus is usually good when the drug is withdrawn. This review discusses the differences between drug-induced lupus erythematosus and systemic lupus erythematosus, the mechanisms of action of drug-induced lupus erythematosus and drugs that are usually associated with drug-induced lupus erythematosus, with particular focus on the biological treatments.

  2. Are major behavioral and sociodemographic risk factors for mortality additive or multiplicative in their effects?

    PubMed

    Mehta, Neil; Preston, Samuel

    2016-04-01

    All individuals are subject to multiple risk factors for mortality. In this paper, we consider the nature of interactions between certain major sociodemographic and behavioral risk factors associated with all-cause mortality in the United States. We develop the formal logic pertaining to two forms of interaction between risk factors, additive and multiplicative relations. We then consider the general circumstances in which additive or multiplicative relations might be expected. We argue that expectations about interactions among socio-demographic variables, and their relation to behavioral variables, have been stated in terms of additivity. However, the statistical models typically used to estimate the relation between risk factors and mortality assume that risk factors act multiplicatively. We examine empirically the nature of interactions among five major risk factors associated with all-cause mortality: smoking, obesity, race, sex, and educational attainment. Data were drawn from the cross-sectional NHANES III (1988-1994) and NHANES 1999-2010 surveys, linked to death records through December 31, 2011. Our analytic sample comprised 35,604 respondents and 5369 deaths. We find that obesity is additive with each of the remaining four variables. We speculate that its additivity is a reflection of the fact that obese status is generally achieved later in life. For all pairings of socio-demographic variables, risks are multiplicative. For survival chances, it is much more dangerous to be poorly educated if you are black or if you are male. And it is much riskier to be a male if you are black. These traits, established at birth or during childhood, literally result in deadly combinations. We conclude that the identification of interactions among risk factors can cast valuable light on the nature of the process being studied. It also has public health implications by identifying especially vulnerable groups and by properly identifying the proportion of deaths

  3. Integrating products of Bessel functions with an additional exponential or rational factor

    NASA Astrophysics Data System (ADS)

    Van Deun, Joris; Cools, Ronald

    2008-04-01

    We provide two MATLAB programs to compute integrals of the form ex∏i=1kJν_i(ax)dxand 0∞xr+x∏i=1kJν_i(ax)dx with Jν_i(x) the Bessel function of the first kind and (real) order ν. The parameter m is a real number such that ∑ν+m>-1 (to assure integrability near zero), r is real and the numbers c and a are all strictly positive. The program can deliver accurate error estimates. Program summaryProgram title: BESSELINTR, BESSELINTC Catalogue identifier: AEAH_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAH_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1601 No. of bytes in distributed program, including test data, etc.: 13 161 Distribution format: tar.gz Programming language: Matlab (version ⩾6.5), Octave (version ⩾2.1.69) Computer: All supporting Matlab or Octave Operating system: All supporting Matlab or Octave RAM: For k Bessel functions our program needs approximately ( 500+140k) double precision variables Classification: 4.11 Nature of problem: The problem consists in integrating an arbitrary product of Bessel functions with an additional rational or exponential factor over a semi-infinite interval. Difficulties arise from the irregular oscillatory behaviour and the possible slow decay of the integrand, which prevents truncation at a finite point. Solution method: The interval of integration is split into a finite and infinite part. The integral over the finite part is computed using Gauss-Legendre quadrature. The integrand on the infinite part is approximated using asymptotic expansions and this approximation is integrated exactly with the aid of the upper incomplete gamma function. In the case where a rational factor is present, this factor is first expanded in a Taylor series around infinity. Restrictions: Some (and eventually all

  4. 34 CFR 648.32 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional factors does the Secretary consider? 648.32 Section 648.32 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION GRADUATE ASSISTANCE IN AREAS OF NATIONAL...

  5. 34 CFR 491.22 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What additional factor does the Secretary consider? 491.22 Section 491.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION FOR THE...

  6. 34 CFR 491.22 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What additional factor does the Secretary consider? 491.22 Section 491.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION FOR THE...

  7. 34 CFR 491.22 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What additional factor does the Secretary consider? 491.22 Section 491.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION FOR THE...

  8. 34 CFR 491.22 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What additional factor does the Secretary consider? 491.22 Section 491.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION FOR THE...

  9. 34 CFR 491.22 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional factor does the Secretary consider? 491.22 Section 491.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION FOR THE...

  10. 34 CFR 636.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional factors does the Secretary consider? 636.22 Section 636.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION URBAN COMMUNITY SERVICE PROGRAM How Does...

  11. 34 CFR 636.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What additional factors does the Secretary consider? 636.22 Section 636.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION URBAN COMMUNITY SERVICE PROGRAM How Does...

  12. 34 CFR 636.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What additional factors does the Secretary consider? 636.22 Section 636.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION URBAN COMMUNITY SERVICE PROGRAM How Does...

  13. 34 CFR 636.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What additional factors does the Secretary consider? 636.22 Section 636.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION URBAN COMMUNITY SERVICE PROGRAM How Does...

  14. 34 CFR 636.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What additional factors does the Secretary consider? 636.22 Section 636.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION URBAN COMMUNITY SERVICE PROGRAM How Does...

  15. 21 CFR 1311.115 - Additional requirements for two-factor authentication.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 9 2013-04-01 2013-04-01 false Additional requirements for two-factor authentication. 1311.115 Section 1311.115 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE... criteria of FIPS 140-2 Security Level 1, as incorporated by reference in § 1311.08, for...

  16. 21 CFR 1311.115 - Additional requirements for two-factor authentication.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 9 2012-04-01 2012-04-01 false Additional requirements for two-factor authentication. 1311.115 Section 1311.115 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE... criteria of FIPS 140-2 Security Level 1, as incorporated by reference in § 1311.08, for...

  17. 34 CFR 425.22 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional factors does the Secretary consider? 425.22 Section 425.22 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION DEMONSTRATION PROJECTS FOR...

  18. 34 CFR 648.32 - What additional factors does the Secretary consider?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... private institutions of higher education. (Authority: 20 U.S.C. 1135-1135c) ... 34 Education 3 2011-07-01 2011-07-01 false What additional factors does the Secretary consider? 648.32 Section 648.32 Education Regulations of the Offices of the Department of Education...

  19. 34 CFR 472.23 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What additional factor does the Secretary consider? 472.23 Section 472.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION NATIONAL WORKPLACE LITERACY PROGRAM...

  20. 34 CFR 472.23 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 3 2012-07-01 2012-07-01 false What additional factor does the Secretary consider? 472.23 Section 472.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION NATIONAL WORKPLACE LITERACY PROGRAM...

  1. 34 CFR 472.23 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 3 2014-07-01 2014-07-01 false What additional factor does the Secretary consider? 472.23 Section 472.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION NATIONAL WORKPLACE LITERACY PROGRAM...

  2. 34 CFR 472.23 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 3 2011-07-01 2011-07-01 false What additional factor does the Secretary consider? 472.23 Section 472.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION NATIONAL WORKPLACE LITERACY PROGRAM...

  3. 34 CFR 472.23 - What additional factor does the Secretary consider?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 3 2013-07-01 2013-07-01 false What additional factor does the Secretary consider? 472.23 Section 472.23 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION NATIONAL WORKPLACE LITERACY PROGRAM...

  4. Compilation of air pollutant emission factors, third edition (including supplements 1-7) supplement 12

    SciTech Connect

    Not Available

    1981-04-01

    In this Supplement for AP-42, revised or updated emissions data are presented for Dry Cleaning; Surface Coating; Storage of Organic Liquids; Solvent Degreasing; Graphic Arts; Consumer/commercial Solvent Use; Sulfuric Acid; Beer Making; Ammonium Sulfate; Primary Aluminum; Secondary Aluminum; Gray Iron Foundries; Steel Foundries; Secondary Zinc; Asphaltic Concrete; Asphalt Roofing; NEDS Source Classification Codes and Emission Factor Listing; and Table of Lead Emission Factors.

  5. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 4 2014-07-01 2014-07-01 false If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... is assessed by the HHG carrier (e.g., boat, trailer, ultralight vehicle), am I responsible...

  6. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 4 2012-07-01 2012-07-01 false If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... Management Federal Travel Regulation System RELOCATION ALLOWANCES TRANSPORTATION AND STORAGE OF PROPERTY...

  7. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 4 2013-07-01 2012-07-01 true If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... Management Federal Travel Regulation System RELOCATION ALLOWANCES TRANSPORTATION AND STORAGE OF PROPERTY...

  8. Latina Resilience in Higher Education: Contributing Factors Including Seasonal Farmworker Experiences

    ERIC Educational Resources Information Center

    Graff, Cristina Santamaria; McCain, Terrence; Gomez-Vilchis, Veronica

    2013-01-01

    Many Latina students overcome multiple obstacles to earn university degrees. Five married Latina women with children and seasonal farmworker backgrounds are the focus of this study which is analyzed through resiliency theory to understand factors contributing to their academic resilience. Variables connected to academic success are explored and…

  9. Accurate expressions for solar cell fill factors including series and shunt resistances

    NASA Astrophysics Data System (ADS)

    Green, Martin A.

    2016-02-01

    Together with open-circuit voltage and short-circuit current, fill factor is a key solar cell parameter. In their classic paper on limiting efficiency, Shockley and Queisser first investigated this factor's analytical properties showing, for ideal cells, it could be expressed implicitly in terms of the maximum power point voltage. Subsequently, fill factors usually have been calculated iteratively from such implicit expressions or from analytical approximations. In the absence of detrimental series and shunt resistances, analytical fill factor expressions have recently been published in terms of the Lambert W function available in most mathematical computing software. Using a recently identified perturbative relationship, exact expressions in terms of this function are derived in technically interesting cases when both series and shunt resistances are present but have limited impact, allowing a better understanding of their effect individually and in combination. Approximate expressions for arbitrary shunt and series resistances are then deduced, which are significantly more accurate than any previously published. A method based on the insights developed is also reported for deducing one-diode fits to experimental data.

  10. Parental concern about vaccine safety in Canadian children partially immunized at age 2: a multivariable model including system level factors.

    PubMed

    MacDonald, Shannon E; Schopflocher, Donald P; Vaudry, Wendy

    2014-01-01

    Children who begin but do not fully complete the recommended series of childhood vaccines by 2 y of age are a much larger group than those who receive no vaccines. While parents who refuse all vaccines typically express concern about vaccine safety, it is critical to determine what influences parents of 'partially' immunized children. This case-control study examined whether parental concern about vaccine safety was responsible for partial immunization, and whether other personal or system-level factors played an important role. A random sample of parents of partially and completely immunized 2 y old children were selected from a Canadian regional immunization registry and completed a postal survey assessing various personal and system-level factors. Unadjusted odds ratios (OR) and adjusted ORs (aOR) were calculated with logistic regression. While vaccine safety concern was associated with partial immunization (OR 7.338, 95% CI 4.138-13.012), other variables were more strongly associated and reduced the strength of the relationship between concern and partial immunization in multivariable analysis (aOR 2.829, 95% CI 1.151-6.957). Other important factors included perceived disease susceptibility and severity (aOR 4.629, 95% CI 2.017-10.625), residential mobility (aOR 3.908, 95% CI 2.075-7.358), daycare use (aOR 0.310, 95% CI 0.144-0.671), number of needles administered at each visit (aOR 7.734, 95% CI 2.598-23.025) and access to a regular physician (aOR 0.219, 95% CI 0.057-0.846). While concern about vaccine safety may be addressed through educational strategies, this study suggests that additional program and policy-level strategies may positively impact immunization uptake.

  11. Current Changes in Pubertal Timing: Revised Vision in Relation with Environmental Factors Including Endocrine Disruptors.

    PubMed

    Parent, Anne-Simone; Franssen, Delphine; Fudvoye, Julie; Pinson, Anneline; Bourguignon, Jean-Pierre

    2016-01-01

    The aim of this chapter is to revise some common views on changes in pubertal timing. This revision is based on recent epidemiological findings on the clinical indicators of pubertal timing and data on environmental factor effects and underlying mechanisms. A current advancement in timing of female puberty is usually emphasized. It appears, however, that timing is also changing in males. Moreover, the changes are towards earliness for initial pubertal stages and towards lateness for final stages in both sexes. Such observations indicate the complexity of environmental influences on pubertal timing. The mechanisms of changes in pubertal timing may involve both the central neuroendocrine control and peripheral effects at tissues targeted by gonadal steroids. While sufficient energy availability is a clue to the mechanism of pubertal development, changes in the control of both energy balance and reproduction may vary under the influence of common determinants such as endocrine-disrupting chemicals (EDCs). These effects can take place right before puberty as well as much earlier, during fetal and neonatal life. Finally, environmental factors can interact with genetic factors in determining changes in pubertal timing. Therefore, the variance in pubertal timing is no longer to be considered under absolutely separate control by environmental and genetic determinants. Some recommendations are provided for evaluation of EDC impact in the management of pubertal disorders and for possible reduction of EDC exposure along the precautionary principle.

  12. Current Changes in Pubertal Timing: Revised Vision in Relation with Environmental Factors Including Endocrine Disruptors.

    PubMed

    Parent, Anne-Simone; Franssen, Delphine; Fudvoye, Julie; Pinson, Anneline; Bourguignon, Jean-Pierre

    2016-01-01

    The aim of this chapter is to revise some common views on changes in pubertal timing. This revision is based on recent epidemiological findings on the clinical indicators of pubertal timing and data on environmental factor effects and underlying mechanisms. A current advancement in timing of female puberty is usually emphasized. It appears, however, that timing is also changing in males. Moreover, the changes are towards earliness for initial pubertal stages and towards lateness for final stages in both sexes. Such observations indicate the complexity of environmental influences on pubertal timing. The mechanisms of changes in pubertal timing may involve both the central neuroendocrine control and peripheral effects at tissues targeted by gonadal steroids. While sufficient energy availability is a clue to the mechanism of pubertal development, changes in the control of both energy balance and reproduction may vary under the influence of common determinants such as endocrine-disrupting chemicals (EDCs). These effects can take place right before puberty as well as much earlier, during fetal and neonatal life. Finally, environmental factors can interact with genetic factors in determining changes in pubertal timing. Therefore, the variance in pubertal timing is no longer to be considered under absolutely separate control by environmental and genetic determinants. Some recommendations are provided for evaluation of EDC impact in the management of pubertal disorders and for possible reduction of EDC exposure along the precautionary principle. PMID:26680578

  13. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna.

    PubMed

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J

    2016-01-01

    The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909-1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare. PMID:27667947

  14. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna.

    PubMed

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J

    2016-01-01

    The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909-1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare.

  15. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna

    PubMed Central

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J.

    2016-01-01

    Abstract The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909–1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare. PMID:27667947

  16. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna

    PubMed Central

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J.

    2016-01-01

    Abstract The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909–1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare.

  17. Staphylococcus aureus carriage in care homes: identification of risk factors, including the role of dementia.

    PubMed

    Lasseter, G; Charlett, A; Lewis, D; Donald, I; Howell-Jones, R; McNulty, C A M

    2010-05-01

    The aim of this study was to investigate the prevalence and associated risk factors of methicillin-susceptible and methicillin-resistant Staphylocccus aureus (MSSA and MRSA) carriage in care homes, with particular focus on dementia. A point-prevalence survey of 748 residents in 51 care homes in Gloucestershire and Greater Bristol was undertaken. Dementia was assessed by the clock test or abbreviated mini-mental test. Nasal swabs were cultured for S. aureus on selective agar media. Multivariable analysis indicated that dementia was not a significant risk factor for MSSA (16.2%) or MRSA (7.8%); and that residents able to move around the home unassisted were at a lower risk of MRSA (P=0.04). MSSA carriage increased with increasing age (P=0.03) but MRSA carriage decreased with increasing age (P=0.05). Hospitalization in the last 6 months increased the risk of MSSA (P=0.04) and MRSA (P=0.10). We concluded that cross-infection through staff caring for more dependent residents may spread MRSA within care homes and from the recently hospitalized. Control of MSSA and MRSA in care homes requires focused infection control interventions.

  18. Including Social Factors in the Analysis of Reminiscence in Elderly Individuals.

    ERIC Educational Resources Information Center

    Lamme, Simone; Baars, Jan

    1993-01-01

    Contends that developmental, determinist, and contextualist psychologists, although all studying reminiscence in older adults, have not fully acknowledged the role the environment plays in establishing reminiscent behavior in elderly people. Suggests including sociological life course theory in the analyses and interpretation of this behavior.…

  19. Linkage map of the human major histocompatibility complex including the tumor necrosis factor genes

    SciTech Connect

    Carroll, M.C.; Katzman, P.; Alicot, E.M.; Koller, B.H.; Geraghty, D.E.; Orr, H.T.; Strominger, J.L.; Spies, T.

    1987-12-01

    The tumor necrosis factor (TNF) ..cap alpha.. and ..beta.. gene pair has been linked in the human major histocompatibility complex to HLA-B, HLA-C, and, tentatively, HLA-E and HLA-A on one side and to the class III complement/steroid 21-hydroxylase gene cluster on the other by pulsed-field gel electrophoresis. The TNF genes are located 200 kilobases (kb) centromeric of HLA-B and about 350 kb telomeric of the class III cluster. Together with previous data on the linkage and structures of the class II and class III regions, a restriction map of the entire human major histocompatibility complex of about 3500 kb has been prepared.

  20. Cerebrospinal fluid markers including trefoil factor 3 are associated with neurodegeneration in amyloid-positive individuals.

    PubMed

    Paterson, R W; Bartlett, J W; Blennow, K; Fox, N C; Shaw, L M; Trojanowski, J Q; Zetterberg, H; Schott, J M

    2014-07-29

    We aimed to identify cerebrospinal fluid (CSF) biomarkers associated with neurodegeneration in individuals with and without CSF evidence of Alzheimer pathology. We investigated 287 Alzheimer's Disease Neuroimaging Initiative (ADNI) subjects (age=74.9±6.9; 22/48/30% with Alzheimer's disease/mild cognitive impairment/controls) with CSF multiplex analyte data and serial volumetric MRI. We calculated brain and hippocampal atrophy rates, ventricular expansion and Mini Mental State Examination decline. We used false discovery rate corrected regression analyses to assess associations between CSF variables and atrophy rates in individuals with and without amyloid pathology, adjusting in stages for tau, baseline volume, p-tau, age, sex, ApoE4 status and diagnosis. Analytes showing statistically significant independent relationships were entered into reverse stepwise analyses. Adjusting for tau, baseline volume, p-tau, age, sex and ApoE4, 4/83 analytes were significantly independently associated with brain atrophy rate, 1/83 with ventricular expansion and 2/83 with hippocampal atrophy. The strongest CSF predictor for the three atrophy measures was low trefoil factor 3 (TFF3). High cystatin C (CysC) was associated with higher whole brain atrophy and hippocampal atrophy rates. Lower levels of vascular endothelial growth factor and chromogranin A (CrA) were associated with higher whole brain atrophy. In exploratory reverse stepwise analyses, lower TFF3 was associated with higher rates of whole brain, hippocampal atrophy and ventricular expansion. Lower levels of CrA were associated with higher whole brain atrophy rate. The relationship between low TFF3 and increased hippocampal atrophy rate remained after adjustment for diagnosis. We identified a series of CSF markers that are independently associated with rate of neurodegeneration in amyloid-positive individuals. TFF3, a substrate for NOTCH processing may be an important biomarker of neurodegeneration across the Alzheimer

  1. Calcifying nanoparticles (nanobacteria): an additional potential factor for urolithiasis in space flight crews.

    PubMed

    Jones, Jeffrey A; Ciftcioglu, Neva; Schmid, Josef F; Barr, Yael R; Griffith, Donald

    2009-01-01

    Spaceflight-induced microgravity appears to be a risk factor for the development of urinary calculi, resulting in urolithiasis during and after spaceflight. Calcifying nanoparticles, or nanobacteria, multiply more rapidly in simulated microgravity and create external shells of calcium phosphate. The question arises whether calcifying nanoparticles are nidi for calculi and contribute to the development of clinically significant urolithiasis in those who are predisposed to the development of urinary calculi because of intrinsic or extrinsic factors. This case report describes a calculus recovered after flight from an astronaut that, on morphologic and immunochemical analysis (including specific monoclonal antibody staining), demonstrated characteristics of calcifying nanoparticles. PMID:18718644

  2. Modulation of Innate Host Factors by Mycobacterium avium Complex in Human Macrophages Includes Interleukin 17

    PubMed Central

    Vázquez, Nancy; Rekka, Sofia; Gliozzi, Maria; Feng, Carl G.; Amarnath, Shoba; Orenstein, Jan M.; Wahl, Sharon M.

    2012-01-01

    Background. Although opportunistic infections due to Mycobacterium avium complex (MAC) have been less common since the introduction of highly active antiretroviral therapy, globally, human immunodeficiency virus-1 (HIV-1)–positive patients remain predisposed to these infections. Absence of a properly functioning acquired immune response allows MAC persistence within macrophages localized in lymph nodes coinfected with HIV and MAC. Although a deficiency in interferon γ appears to play a part in the ability of MAC to deflect the macrophage-associated antimicrobial attack, questions about this process remain. Our study examines the ability of MAC to regulate interleukin 17 (IL-17), a proinflammatory cytokine involved in host cell recruitment. Methods. Coinfected lymph nodes were examined for IL-17 by immunohistochemical analysis. In vitro, macrophages exposed to mycobacteria were evaluated for transcription activities, proteins, and signaling pathways responsible for IL-17 expression. Infected macrophages were also analyzed for expression of interleukin 21 (IL-21) and negative regulators of immune responses. Results. Infection of macrophages triggered synthesis of IL-17, correlating with IL-17 expression by macrophages in coinfected lymph nodes. Infected macrophages exposed to exogenous IL-17 expressed CXCL10, which favors recruitment of new macrophages as targets for infection. Blockade of nuclear factor κ-light-chain-enhancer of activated B cells and mitogen-activated protein kinase pathways suppressed mycobacteria-induced IL-17 expression. MAC triggered expression of IL-21, IRF4, and STAT3 genes related to IL-17 regulation, as well as expression of the negative immunoregulators CD274(PD-L1) and suppressors of cytokine signaling. Conclusions. MAC-infected macrophages can provide an alternative source for IL-17 that favors accumulation of new targets for perpetuating bacterial and viral infection while suppressing host antimicrobial immune responses. PMID

  3. ‘LONESOME TOWN’? IS LONELINESS ASSOCIATED WITH THE RESIDENTIAL ENVIRONMENT, INCLUDING HOUSING AND NEIGHBORHOOD FACTORS?

    PubMed Central

    Whitley, Elise; Tannahill, Carol; Ellaway, Anne

    2015-01-01

    This article considers whether feelings of loneliness are associated with aspects of the home and neighborhood of residence. Multinominal logistic regression models were used to explore associations between residential environment and loneliness in 4,000 residents across deprived areas of Glasgow. People who rated their neighborhood environment of higher quality and who used more local amenities were less likely to report loneliness. Respondents who knew more people within the local area were less likely to report loneliness. Those who reported more antisocial behavior problems, who had a weak perception of collective efficacy, and who felt unsafe walking alone at nighttime were more likely to report loneliness. Length of residence and dwelling type were not associated with reported loneliness. The findings indicate the potential importance of several dimensions of the neighborhood physical, service, and social environment, including aspects of both quality and trust, in protecting against or reducing loneliness in deprived areas. PMID:26740728

  4. 40 CFR 273.81 - Factors for petitions to include other wastes under 40 CFR part 273.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... wastes under 40 CFR part 273. 273.81 Section 273.81 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR UNIVERSAL WASTE MANAGEMENT Petitions To Include Other Wastes Under 40 CFR Part 273 § 273.81 Factors for petitions to include other wastes under 40...

  5. Impact of Outliers Arising from Unintended and Unknowingly Included Subpopulations on the Decisions about the Number of Factors in Exploratory Factor Analysis

    ERIC Educational Resources Information Center

    Liu, Yan; Zumbo, Bruno D.

    2012-01-01

    There is a lack of research on the effects of outliers on the decisions about the number of factors to retain in an exploratory factor analysis, especially for outliers arising from unintended and unknowingly included subpopulations. The purpose of the present research was to investigate how outliers from an unintended and unknowingly included…

  6. Cerebriform variant type of T cell prolymphocytic leukemia with complex karyotype including an additional segment at 1p36.1.

    PubMed

    Kasahara, Senji; Tsurumi, Hisashi; Shibata, Yuhei; Matsumoto, Takuro; Nakamura, Nobuhiko; Nakamura, Hiroshi; Kanemura, Nobuhiro; Goto, Naoe; Hara, Takeshi; Moriwaki, Hisataka

    2012-11-01

    We describe two patients with T cell prolymphocytic leukemia (T-PLL) who exhibited the same complex karyotype, including an additional segment at 1p36.1. One presented with secondary progression following an initial stable clinical course, and the other with typically progressive disease. Features of the cerebriform variant were identified in the peripheral blood of both patients. Aggressive symptoms, such as lymphocytosis, lymphadenopathy, pleural effusion, cutaneous involvement and hepatosplenomegaly, developed during the progressive phases. Levels of serum soluble interleukin 2 receptor increased when symptoms worsened. These patients did not have the karyotypic 14q11 abnormality and trisomy 8q that are features of non-Japanese patients. The prognoses of these patients were poor; one survived for 2 months and the other survived for 10 months after progression. A chromosomal abnormality may occur in other types of aggressive T-PLL, particularly when extramedullary infiltration is a feature.

  7. 40 CFR 273.81 - Factors for petitions to include other wastes under 40 CFR part 273.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... wastes under 40 CFR part 273. 273.81 Section 273.81 Protection of Environment ENVIRONMENTAL PROTECTION... Other Wastes Under 40 CFR Part 273 § 273.81 Factors for petitions to include other wastes under 40 CFR... requirements appropriate to be added to 40 CFR 273.13, 273.33, and 273.52; and/or applicable Department...

  8. 40 CFR 273.81 - Factors for petitions to include other wastes under 40 CFR part 273.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... wastes under 40 CFR part 273. 273.81 Section 273.81 Protection of Environment ENVIRONMENTAL PROTECTION... Other Wastes Under 40 CFR Part 273 § 273.81 Factors for petitions to include other wastes under 40 CFR... requirements appropriate to be added to 40 CFR 273.13, 273.33, and 273.52; and/or applicable Department...

  9. 40 CFR 273.81 - Factors for petitions to include other wastes under 40 CFR part 273.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... wastes under 40 CFR part 273. 273.81 Section 273.81 Protection of Environment ENVIRONMENTAL PROTECTION... Other Wastes Under 40 CFR Part 273 § 273.81 Factors for petitions to include other wastes under 40 CFR... example, households, retail and commercial businesses, office complexes, conditionally exempt...

  10. Receptor modelling of fine particles in southern England using CMB including comparison with AMS-PMF factors

    NASA Astrophysics Data System (ADS)

    Yin, J.; Cumberland, S. A.; Harrison, R. M.; Allan, J.; Young, D. E.; Williams, P. I.; Coe, H.

    2015-02-01

    PM2.5 was collected during a winter campaign at two southern England sites, urban background North Kensington (NK) and rural Harwell (HAR), in January-February 2012. Multiple organic and inorganic source tracers were analysed and used in a Chemical Mass Balance (CMB) model, which apportioned seven separate primary sources, that explained on average 53% (NK) and 56% (HAR) of the organic carbon (OC), including traffic, woodsmoke, food cooking, coal combustion, vegetative detritus, natural gas and dust/soil. With the addition of source tracers for secondary biogenic aerosol at the NK site, 79% of organic carbon was accounted for. Secondary biogenic sources were represented by oxidation products of α-pinene and isoprene, but only the former made a substantial contribution to OC. Particle source contribution estimates for PM2.5 mass were obtained by the conversion of the OC estimates and combining with inorganic components ammonium nitrate, ammonium sulfate and sea salt. Good mass closure was achieved with 81% (92% with the addition of the secondary biogenic source) and 83% of the PM2.5 mass explained at NK and HAR respectively, with the remainder being secondary organic matter. While the most important sources of OC are vehicle exhaust (21 and 16%) and woodsmoke (15 and 28%) at NK and HAR respectively, food cooking emissions are also significant, particularly at the urban NK site (11% of OC), in addition to the secondary biogenic source, only measured at NK, which represented about 26%. In comparison, the major source components for PM2.5 at NK and HAR are inorganic ammonium salts (51 and 56%), vehicle exhaust emissions (8 and 6%), secondary biogenic (10% measured at NK only), woodsmoke (4 and 7%) and sea salt (7 and 8%), whereas food cooking (4 and 1%) showed relatively smaller contributions to PM2.5. Results from the CMB model were compared with source contribution estimates derived from the AMS-PMF method. The overall mass of organic matter accounted for is rather

  11. Additive Factors Do Not Imply Discrete Processing Stages: A Worked Example Using Models of the Stroop Task

    PubMed Central

    Stafford, Tom; Gurney, Kevin N.

    2011-01-01

    Previously, it has been shown experimentally that the psychophysical law known as Piéron’s Law holds for color intensity and that the size of the effect is additive with that of Stroop condition (Stafford et al., 2011). According to the additive factors method (Donders, 1868–1869/1969; Sternberg, 1998), additivity is assumed to indicate independent and discrete processing stages. We present computational modeling work, using an existing Parallel Distributed Processing model of the Stroop task (Cohen et al., 1990) and a standard model of decision making (Ratcliff, 1978). This demonstrates that additive factors can be successfully accounted for by existing single stage models of the Stroop effect. Consequently, it is not valid to infer either discrete stages or separate loci of effects from additive factors. Further, our modeling work suggests that information binding may be a more important architectural property for producing additive factors than discrete stages. PMID:22102842

  12. The Benefits of Including Clinical Factors in Rectal Normal Tissue Complication Probability Modeling After Radiotherapy for Prostate Cancer

    SciTech Connect

    Defraene, Gilles; Van den Bergh, Laura; Al-Mamgani, Abrahim; Haustermans, Karin; Heemsbergen, Wilma; Van den Heuvel, Frank; Lebesque, Joos V.

    2012-03-01

    Purpose: To study the impact of clinical predisposing factors on rectal normal tissue complication probability modeling using the updated results of the Dutch prostate dose-escalation trial. Methods and Materials: Toxicity data of 512 patients (conformally treated to 68 Gy [n = 284] and 78 Gy [n = 228]) with complete follow-up at 3 years after radiotherapy were studied. Scored end points were rectal bleeding, high stool frequency, and fecal incontinence. Two traditional dose-based models (Lyman-Kutcher-Burman (LKB) and Relative Seriality (RS) and a logistic model were fitted using a maximum likelihood approach. Furthermore, these model fits were improved by including the most significant clinical factors. The area under the receiver operating characteristic curve (AUC) was used to compare the discriminating ability of all fits. Results: Including clinical factors significantly increased the predictive power of the models for all end points. In the optimal LKB, RS, and logistic models for rectal bleeding and fecal incontinence, the first significant (p = 0.011-0.013) clinical factor was 'previous abdominal surgery.' As second significant (p = 0.012-0.016) factor, 'cardiac history' was included in all three rectal bleeding fits, whereas including 'diabetes' was significant (p = 0.039-0.048) in fecal incontinence modeling but only in the LKB and logistic models. High stool frequency fits only benefitted significantly (p = 0.003-0.006) from the inclusion of the baseline toxicity score. For all models rectal bleeding fits had the highest AUC (0.77) where it was 0.63 and 0.68 for high stool frequency and fecal incontinence, respectively. LKB and logistic model fits resulted in similar values for the volume parameter. The steepness parameter was somewhat higher in the logistic model, also resulting in a slightly lower D{sub 50}. Anal wall DVHs were used for fecal incontinence, whereas anorectal wall dose best described the other two endpoints. Conclusions: Comparable

  13. Additive cytotoxicity of different monoclonal antibody-cobra venom factor conjugates for human neuroblastoma cells.

    PubMed

    Juhl, H; Petrella, E C; Cheung, N K; Bredehorst, R; Vogel, C W

    1997-11-01

    Insufficient numbers of antigen molecules and heterogeneity of antigen expression on tumor cells are major factors limiting the immunotherapeutic potential of the few clinically useful monoclonal antibodies capable of mediating complement cytotoxicity and antibody-dependent cellular cytotoxicity. To overcome this limitation, we converted two non-cytotoxic monoclonal anti-neuroblastoma antibodies, designated 3E7 (IgG2b) and 8H9 (IgG1), and the non-cytotoxic F(ab')2 fragment of the cytotoxic monoclonal anti-GD2 antibody 3F8 (IgG3) into cytotoxic antibody conjugates by covalent attachment of cobra venom factor (CVF), a structural and functional homologue of the activated third component of complement. Competitive binding experiments confirmed the different specificities of the three antibodies. In the presence of human complement, all three antibody-CVF conjugates mediated selective complement-dependent lysis of human neuroblastoma cells. Consistent with the kinetics of the alternative pathway of complement, approximately seven hours incubation were required to reach maximum cytotoxicity of up to 25% for the 3E7-CVF conjugate, up to 60% for the 8H9-CVF conjugate, and up to 95% for the 3F8 F(ab')2-CVF conjugate. The different extent of maximal cytotoxic activity of the three conjugates was reflected by corresponding differences in the extent of binding of both unconjugated antibodies and the respective conjugates. Any combination of the three antibody-CVF conjugates caused an additive effect in complement-mediated lysis. Using a cocktail of all three conjugates, the extent of complement-mediated killing could be increased up to 100%. These data demonstrate that by coupling of CVF the relative large number of non-cytotoxic monoclonal anti-tumor antibodies of interesting specificity can be used to design cocktails of cytotoxic conjugates and, thereby, to overcome the problem of insufficient and heterogeneous antigen expression on tumor cells for immunotherapy.

  14. Hydrogeomorphic Classification of Wetlands on Mt. Desert Island, Maine, Including Hydrologic Susceptibility Factors for Wetlands in Acadia National Park

    USGS Publications Warehouse

    Nielsen, Martha G.

    2006-01-01

    The U.S. Geological Survey, in cooperation with the National Park Service, developed a hydrogeomorphic (HGM) classification system for wetlands greater than 0.4 hectares (ha) on Mt. Desert Island, Maine, and applied this classification using map-scale data to more than 1,200 mapped wetland units on the island. In addition, two hydrologic susceptibility factors were defined for a subset of these wetlands, using 11 variables derived from landscape-scale characteristics of the catchment areas of these wetlands. The hydrologic susceptibility factors, one related to the potential hydrologic pathways for contaminants and the other to the susceptibility of wetlands to disruptions in water supply from projected future changes in climate, were used to indicate which wetlands (greater than 1 ha) in Acadia National Park (ANP) may warrant further investigation or monitoring. The HGM classification system consists of 13 categories: Riverine-Upper Perennial, Riverine-Nonperennial, Riverine- Tidal, Depressional-Closed, Depressional-Semiclosed, Depressional-Open, Depressional-No Ground-Water Input, Mineral Soil Flat, Organic Soil Flat, Tidal Fringe, Lacustrine Fringe, Slope, and Hilltop/Upper Hillslope. A dichotomous key was developed to aid in the classification of wetlands. The National Wetland Inventory maps produced by the U.S. Fish and Wildlife Service provided the wetland mapping units used for this classification. On the basis of topographic map information and geographic information system (GIS) layers at a scale of 1:24,000 or larger, 1,202 wetland units were assigned a preliminary HGM classification. Two of the 13 HGM classes (Riverine-Tidal and Depressional-No Ground-Water Input) were not assigned to any wetlands because criteria for determining those classes are not available at that map scale, and must be determined by more site-specific information. Of the 1,202 wetland polygons classified, which cover 1,830 ha in ANP, 327 were classified as Slope, 258 were

  15. Mesenchymal stem cell therapy ameliorates diabetic nephropathy via the paracrine effect of renal trophic factors including exosomes

    PubMed Central

    Nagaishi, Kanna; Mizue, Yuka; Chikenji, Takako; Otani, Miho; Nakano, Masako; Konari, Naoto; Fujimiya, Mineko

    2016-01-01

    Bone marrow-derived mesenchymal stem cells (MSCs) have contributed to the improvement of diabetic nephropathy (DN); however, the actual mediator of this effect and its role has not been characterized thoroughly. We investigated the effects of MSC therapy on DN, focusing on the paracrine effect of renal trophic factors, including exosomes secreted by MSCs. MSCs and MSC-conditioned medium (MSC-CM) as renal trophic factors were administered in parallel to high-fat diet (HFD)-induced type 2 diabetic mice and streptozotocin (STZ)-induced insulin-deficient diabetic mice. Both therapies showed approximately equivalent curative effects, as each inhibited the exacerbation of albuminuria. They also suppressed the excessive infiltration of BMDCs into the kidney by regulating the expression of the adhesion molecule ICAM-1. Proinflammatory cytokine expression (e.g., TNF-α) and fibrosis in tubular interstitium were inhibited. TGF-β1 expression was down-regulated and tight junction protein expression (e.g., ZO-1) was maintained, which sequentially suppressed the epithelial-to-mesenchymal transition of tubular epithelial cells (TECs). Exosomes purified from MSC-CM exerted an anti-apoptotic effect and protected tight junction structure in TECs. The increase of glomerular mesangium substrate was inhibited in HFD-diabetic mice. MSC therapy is a promising tool to prevent DN via the paracrine effect of renal trophic factors including exosomes due to its multifactorial action. PMID:27721418

  16. Catchment process affecting drinking water quality, including the significance of rainfall events, using factor analysis and event mean concentrations.

    PubMed

    Cinque, Kathy; Jayasuriya, Niranjali

    2010-12-01

    To ensure the protection of drinking water an understanding of the catchment processes which can affect water quality is important as it enables targeted catchment management actions to be implemented. In this study factor analysis (FA) and comparing event mean concentrations (EMCs) with baseline values were techniques used to asses the relationships between water quality parameters and linking those parameters to processes within an agricultural drinking water catchment. FA found that 55% of the variance in the water quality data could be explained by the first factor, which was dominated by parameters usually associated with erosion. Inclusion of pathogenic indicators in an additional FA showed that Enterococcus and Clostridium perfringens (C. perfringens) were also related to the erosion factor. Analysis of the EMCs found that most parameters were significantly higher during periods of rainfall runoff. This study shows that the most dominant processes in an agricultural catchment are surface runoff and erosion. It also shows that it is these processes which mobilise pathogenic indicators and are therefore most likely to influence the transport of pathogens. Catchment management efforts need to focus on reducing the effect of these processes on water quality.

  17. 34 CFR 359.32 - What additional factors does the Secretary consider in making a grant under this program?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EDUCATION DISABILITY AND REHABILITATION RESEARCH: SPECIAL PROJECTS AND DEMONSTRATIONS FOR SPINAL CORD INJURIES How Does the Secretary Make a Grant? § 359.32 What additional factors does the Secretary...

  18. 34 CFR 359.32 - What additional factors does the Secretary consider in making a grant under this program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... EDUCATION DISABILITY AND REHABILITATION RESEARCH: SPECIAL PROJECTS AND DEMONSTRATIONS FOR SPINAL CORD INJURIES How Does the Secretary Make a Grant? § 359.32 What additional factors does the Secretary...

  19. 34 CFR 359.32 - What additional factors does the Secretary consider in making a grant under this program?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... EDUCATION DISABILITY AND REHABILITATION RESEARCH: SPECIAL PROJECTS AND DEMONSTRATIONS FOR SPINAL CORD INJURIES How Does the Secretary Make a Grant? § 359.32 What additional factors does the Secretary...

  20. 34 CFR 359.32 - What additional factors does the Secretary consider in making a grant under this program?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... EDUCATION DISABILITY AND REHABILITATION RESEARCH: SPECIAL PROJECTS AND DEMONSTRATIONS FOR SPINAL CORD INJURIES How Does the Secretary Make a Grant? § 359.32 What additional factors does the Secretary...

  1. 34 CFR 359.32 - What additional factors does the Secretary consider in making a grant under this program?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... EDUCATION DISABILITY AND REHABILITATION RESEARCH: SPECIAL PROJECTS AND DEMONSTRATIONS FOR SPINAL CORD INJURIES How Does the Secretary Make a Grant? § 359.32 What additional factors does the Secretary...

  2. Including xpc® feed additive in the diet of inoculated broilers during grow-out helps control salmonella associated with their carcasses after processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this study was to test XPC® feed additive for control of Salmonella in poultry meat products. Day of hatch broiler chicks were gavaged with 106 cells of a nalidixic acid resistant marker strain of Salmonella Typhimurium and placed on clean pine shavings in 9 separate floor pens (25 ...

  3. Translationally invariant calculations of form factors, nucleon densities and momentum distributions for finite nuclei with short-range correlations included

    NASA Astrophysics Data System (ADS)

    Shebeko, A. V.; Grigorov, P. A.; Iurasov, V. S.

    2012-11-01

    Relying upon our previous treatment of the density matrices for nuclei (in general, nonrelativistic self-bound finite systems) we are studying a combined effect of center-of-mass motion and short-range nucleon-nucleon correlations on the nucleon density and momentum distributions in light nuclei (4He and 16O). Their intrinsic ground-state wave functions are constructed in the so-called fixed center-of-mass approximation, starting with mean-field Slater determinants modified by some correlator ( e.g., after Jastrow or Villars). We develop the formalism based upon the Cartesian or boson representation, in which the coordinate and momentum operators are linear combinations of the creation and annihilation operators for oscillatory quanta in the three different space directions, and get the own "Tassie-Barker" factors for each distribution and point out other model-independent results. After this separation of the center-of-mass motion effects we propose additional analytic means in order to simplify the subsequent calculations ( e.g., within the Jastrow approach or the unitary correlation operator method). The charge form factors, densities and momentum distributions of 4He and 16O evaluated by using the well-known cluster expansions are compared with data, our exact (numerical) results and microscopic calculations.

  4. Relative Importance and Additive Effects of Maternal and Infant Risk Factors on Childhood Asthma

    PubMed Central

    Rosas-Salazar, Christian; James, Kristina; Escobar, Gabriel; Gebretsadik, Tebeb; Li, Sherian Xu; Carroll, Kecia N.; Walsh, Eileen; Mitchel, Edward; Das, Suman; Kumar, Rajesh; Yu, Chang; Dupont, William D.; Hartert, Tina V.

    2016-01-01

    Background Environmental exposures that occur in utero and during early life may contribute to the development of childhood asthma through alteration of the human microbiome. The objectives of this study were to estimate the cumulative effect and relative importance of environmental exposures on the risk of childhood asthma. Methods We conducted a population-based birth cohort study of mother-child dyads who were born between 1995 and 2003 and were continuously enrolled in the PRIMA (Prevention of RSV: Impact on Morbidity and Asthma) cohort. The individual and cumulative impact of maternal urinary tract infections (UTI) during pregnancy, maternal colonization with group B streptococcus (GBS), mode of delivery, infant antibiotic use, and older siblings at home, on the risk of childhood asthma were estimated using logistic regression. Dose-response effect on childhood asthma risk was assessed for continuous risk factors: number of maternal UTIs during pregnancy, courses of infant antibiotics, and number of older siblings at home. We further assessed and compared the relative importance of these exposures on the asthma risk. In a subgroup of children for whom maternal antibiotic use during pregnancy information was available, the effect of maternal antibiotic use on the risk of childhood asthma was estimated. Results Among 136,098 singleton birth infants, 13.29% developed asthma. In both univariate and adjusted analyses, maternal UTI during pregnancy (odds ratio [OR] 1.2, 95% confidence interval [CI] 1.18, 1.25; adjusted OR [AOR] 1.04, 95%CI 1.02, 1.07 for every additional UTI) and infant antibiotic use (OR 1.21, 95%CI 1.20, 1.22; AOR 1.16, 95%CI 1.15, 1.17 for every additional course) were associated with an increased risk of childhood asthma, while having older siblings at home (OR 0.92, 95%CI 0.91, 0.93; AOR 0.85, 95%CI 0.84, 0.87 for each additional sibling) was associated with a decreased risk of childhood asthma, in a dose-dependent manner. Compared with vaginal

  5. Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics.

    PubMed

    John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D

    2016-04-01

    We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems. PMID:27176426

  6. Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics

    NASA Astrophysics Data System (ADS)

    John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D.

    2016-04-01

    We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems.

  7. Factors that affect postdialysis rebound in serum urea concentration, including the rate of dialysis: results from the HEMO Study.

    PubMed

    Daugirdas, John T; Greene, Tom; Depner, Thomas A; Leypoldt, John; Gotch, Frank; Schulman, Gerald; Star, Robert

    2004-01-01

    Previous studies have suggested that postdialysis urea rebound is related to K/V, the rate of dialysis, but a systematic analysis of factors that affect rebound has not been reported. With the use of 30-min and, in a subset, 60-min postdialysis samples, postdialysis urea rebound was measured to (1) determine how well previously proposed equations based on the rate of dialysis (K/V) predict rebound in a large sample of patients with varying characteristics, (2) determine whether other factors besides K/V affect rebound, and (3) estimate more precise values for coefficients in prediction equations for rebound. Rebound was calculated relative to both immediate and 20-s postdialysis samples to study early components of rebound unrelated to access recirculation. The equilibrated Kt/V (eKt/V) computed by fitting the two-pool variable volume model to the 30-min postdialysis sample agreed well with eKt/V based on the 60-min postdialysis sample. Using the pre-, post-, and 30-min postdialysis samples for 1245 patients with arteriovenous (AV) accesses, the median intercompartmental mass transfer coefficient (Kc) was 797 ml/min for rebound computed relative to the 20-s postdialysis samples and 592 ml/min relative to the immediate postdialysis samples. K/V was the strongest predictor of rebound among 22 factors considered. Other factors associated with greater rebound for 1331 patients using AV accesses or venous catheters included access type, black race, male gender, absence of congestive heart failure, greater age, ultrafiltration rate, and low predialysis or intradialysis systolic BP. Equations of the form eKt/V = single-pool Kt/V - B x (K/V) were fit to the data. With AV access, the optimum values for the slope term (B) were 0.39 and 0.46 (in h(-1)) for single-pool Kt/V calculated based on 20-s postdialysis or immediate postdialysis samples, respectively. For patients using venous catheters, the respective values for B were 0.22 and 0.29. Postdialysis urea rebound can be

  8. Study Modules for Calculus-Based General Physics. [Includes Modules 1 and 2: Dimensions and Vector Addition; Rectilinear Motion; plus a Trigonometry and Calculus Review].

    ERIC Educational Resources Information Center

    Fuller, Robert G., Ed.; And Others

    This is part of a series of 42 Calculus Based Physics (CBP) modules totaling about 1,000 pages. The modules include study guides, practice tests, and mastery tests for a full-year individualized course in calculus-based physics based on the Personalized System of Instruction (PSI). The units are not intended to be used without outside materials;…

  9. 21 CFR 1311.115 - Additional requirements for two-factor authentication.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., such as a password or response to a challenge question. (2) Something the practitioner is, biometric... modules or one-time-password devices. (c) If one factor is a biometric, the biometric subsystem...

  10. 21 CFR 1311.115 - Additional requirements for two-factor authentication.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., such as a password or response to a challenge question. (2) Something the practitioner is, biometric... modules or one-time-password devices. (c) If one factor is a biometric, the biometric subsystem...

  11. [Factors relate to participation in medical checkups in a rural community an analysis including social network scores].

    PubMed

    Okamura, T; Suzuki, R; Nakagawa, Y; Terao, A; Sato, S; Kitamura, A; Naito, Y; Imano, H; Tamura, Y; Iida, M; Komachi, Y

    1999-08-01

    Since 1969, community-based stroke prevention programs have been conducted in N town, Kochi prefecture. To clarify factors related to participation in medical checkups including social networks, a cross-sectional questionnaire survey was performed on 6,704 residents aged 40 and over in N town in 1996. 1. Location of the workplace, types of medical insurance and interest in health were significantly associated with participation in medical checkups. 2. Participation in medical examinations provided at the workplace was significantly, inversely related with participation rates in community checkups in the group aged 40 to 59 years. 3. Low independence level in daily activities was inversely associated with participation rates for medical checkups in groups aged 60 years and older. 4. Visiting medical facilities was inversely associated with the participation rate for medical checkups in female groups. 5. The group with the highest social networks score (5 points) had the highest participation rate for medical checkups. After adjusting for other participation related factors, social networks scores had a significantly positive association with the participation rate for medical checkups provided by the Health Services for the Elderly Act. PMID:10496030

  12. Localization of eight additional genes in the human major histocompatibility complex, including the gene encoding the casein kinase II {beta} subunit (CSNK2B)

    SciTech Connect

    Albertella, M.R.; Jones, H.; Thomson, W.

    1996-09-01

    A wide range of autoimmune and other diseases are known to be associated with the major histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility antigens in the class I and class II regions, but some appear to be more strongly associated with genes in the central 1100-kb class III region, making it important to characterize this region fully for the presence of novel genes. An {approximately}220-kb segment of DNA in the class III region separating the Hsp70 (HSPA1L) and BAT1 (D6S8IE) genes, which was previously known to contain 14 genes. Genomic DNA fragments spanning the gaps between the known genes were used as probes to isolate cDNAs corresponding to five new genes within this region. Evidence from Northern blot analysis and exon trapping experiments that suggested the presence of at least two more new genes was also obtained. Partial cDNA and complete exonic genomic sequencing of one of the new genes has identified it as the casein kinase II{beta} subunit (CSNK2B). Two of the other novel genes lie within a region syntenic to that implicated in susceptibility to experimental allergic orchitis in the mouse, an autoimmune disease of the testis, and represent additional candidates for the Orch-1 locus associated with this disease. In addition, characterization of the 13-kb intergenic gap separating the RD (D6545) and G11 (D6S60E) genes has revealed the presence of a gene encoding a 1246-amino-acid polypeptide that shows significant sequence similarity to the yeast anti-viral Ski2p gene product. 49 refs., 8 figs.

  13. Uranium hydrogeochemical survey of well waters from an area around Pie Town, Catron County, West-Central New Mexico, including concentrations of twenty-three additional elements

    SciTech Connect

    Morgan, T.L.; George, W.E.; Hensley, W.K.; Thomas, G.J.; Langhorst, A.L.

    1980-10-01

    As part of the Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) of the National Uranium Resource Evaluation (NURE) sponsored by the US Department of Energy (DOE), the Los Alamos Scientific Laboratory (LASL) conducted a detailed hydrogeochemical survey of well waters in a 4250-km/sup 2/ area near Pie Town in west-central New Mexico. A total of 300 well samples was collected and analyzed for uranium and 23 other elements. The results of these analyses and carbonate and bicarbonate ion concentrations are presented in the Appendixes of this report. Uranium concentrations range from below the detection limit of 0.02 parts per billion (ppB) to 293.18 ppB and average 8.71 ppB. Samples containing high levels of uranium were collected from the Largo Creek valley west of Quemado, from a small area about 6 km east of Quemado, from a small area surrounding Pie Town, and from scattered locations in the area surrounding Adams Diggings north of Pie Town. Most of the samples containing high uranium concentrations were collected from wells associated with the volcanic sedimentary facies of the Datil formation. This formation is a likely source of mobile uranium that may be precipitating in the underlying Baca formation, a known uranium host unit. Bicarbonate ion concentration, while proportional to uranium concentration in some cases, is not a strong controlling factor in the uranium concentrations in samples from this area.

  14. Petrographic and Geochemical Characterization of Ore-Bearing Intrusions of the Noril'sk type, Siberia; With Discussion of Their Origin, Including Additional Datasets and Core Logs

    USGS Publications Warehouse

    Czamanske, Gerald K.

    2002-01-01

    The Noril'sk I, Talnakh, and Kharaelakh intrusions of the Noril'sk district host one of the outstanding metal concentrations in the world; contained Cu-Ni resources are comparable to the deposits at Sudbury, Ontario and the platinum group element (PGE) resource is second only to that of the Bushveld Complex. Our opportunity to cooperatively sample and study this district in Siberian Russia arose in 1990 through a memorandum of understanding between the U.S. Geological Survey and the former Ministry of Geology of the U.S.S.R. The world-class significance of these deposits and the possibility that understanding their geologic context, including construction of a credible 'ore-deposit model,' will lead to discovery of similar deposits elsewhere, inspired extensive studies of the ores, the mafic-intrusions which host them, and associated flood basalts.

  15. Uranium hydrogeochemical and stream sediment reconnaissance of the Dalhart NTMS quadrangle, New Mexico/Texas/Oklahoma, including concentrations of forty-two additional elements

    SciTech Connect

    Morgan, T.L.

    1980-08-01

    Totals of 1583 water samples and 503 sediment samples were collected from 2028 locations within the 20 000-km/sup 2/ area of the quadrangle at an average density of one location per 9.86 km/sup 2/. Water samples were collected from wells, springs, and streams and were analyzed for uranium. Sediment samples were collected from streams and springs and were analyzed for uranium, thorium, and 41 additional elements. All field and analytical data are listed in the appendixes of this report. Discussion is limited to anomalous samples, which are considered to be those containing over 20 ppB uranium for waters and over 5 ppM uranium for sediments. Uranium concentrations in water samples range from below the detection limit of 0.2 ppB to 1457.65 ppB and average 7.41 ppB. Most of the seventy anomalous water samples (4.4% of all water samples) are grouped spatially into five clusters or areas of interest. Samples in three of the clusters were collected along the north edge of the quadrangle where Mesozoic strata are exposed. The other two clusters are from the central and southern portions where the Quaternary Ogallala formation is exposed. Sediment samples from the quadrangle have uranium concentrations that range from 0.90 ppM to 27.20 ppM and average 3.27 ppM. Fourteen samples (2.8% of all sediment samples) contain over 5 ppM uranium and are considered anomalous. The five samples with the highest concentrations occur where downcutting streams expose Cretaceous units beneath the Quaternary surficial deposits. The remaining anomalous sediment samples were collected from scattered locations and do not indicate any single formation or unit as a potential source for the anomalous concentrations.

  16. 21 CFR 1311.115 - Additional requirements for two-factor authentication.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) separate from the computer to which the practitioner is gaining access. (b) If one factor is a hard token, it must be separate from the computer to which it is gaining access and must meet at least the criteria of FIPS 140-2 Security Level 1, as incorporated by reference in § 1311.08, for...

  17. The effect of nutritional additives on anti-infective factors in human milk.

    PubMed

    Quan, R; Yang, C; Rubinstein, S; Lewiston, N J; Stevenson, D K; Kerner, J A

    1994-06-01

    It has become a common practice to supplement human milk with a variety of additives to improve the nutritive content of the feeding for the premature infant. Twenty-two freshly frozen human milk samples were measured for lysozyme activity, total IgA, and specific IgA to Escherichia coli serotypes 01, 04, and 06. One mL aliquots were mixed with the following: 1 mL of Similac, Similac Special Care, Enfamil, Enfamil Premature Formula, and sterile water; 33 mL of Poly-Vi-Sol, 33 mg of Moducal, and 38 mg of breast-milk fortifier, and then reanalyzed. Significant decreases (41% to 74%) in lysozyme activity were seen with the addition of all formulas; breast-milk fortifier reduced activity by 19%, while no differences were seen with Moducal, sterile water, or Poly-Vi-Sol. No differences were seen in total IgA content, but some decreases were seen in specific IgA to E. coli serotypes 04 and 06. E. coli growth was determined after 3 1/2 hours of incubation at 37 degrees C after mixing. All cow-milk formulas enhanced E. coli growth; soy formulas and other additives preserved inhibition of bacterial growth. Nutritional additives can impair anti-infective properties of human milk, and such interplay should be considered in the decision on the feeding regimen of premature infants.

  18. 34 CFR 377.22 - What additional factors does the Secretary consider in making grants?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION DEMONSTRATION PROJECTS TO INCREASE CLIENT CHOICE PROGRAM How Does the Secretary Make an Award? § 377.22 What additional... strategies to increase client choice, in order to ensure that a variety of approaches are demonstrated...

  19. 34 CFR 377.22 - What additional factors does the Secretary consider in making grants?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION DEMONSTRATION PROJECTS TO INCREASE CLIENT CHOICE PROGRAM How Does the Secretary Make an Award? § 377.22 What additional... strategies to increase client choice, in order to ensure that a variety of approaches are demonstrated...

  20. Targets of the StBEL5 Transcription Factor Include the FT Ortholog StSP6A1[OPEN

    PubMed Central

    Lin, Tian

    2016-01-01

    The BEL1-like family of transcription factors is ubiquitous in plants and plays important roles in regulating development. They function in tandem with KNOTTED1 types to bind to a double TTGAC motif in the upstream sequence of target genes. StBEL5 of potato (Solanum tuberosum) functions as a mobile RNA signal that is transcribed in leaves, moves down into stolons in response to short days, and induces tuber formation. Despite their importance, however, very little is known about the targets of BEL1-like transcription factors. To better understand this network, we made use of a phloem-mobile BEL5 induction model, an ethanol-inducible system coupled with RNA sequencing analysis, and a screen for tandem TTGAC cis-elements in the upstream sequence to catalog StBEL5 target genes. Induction of StBEL5 activated several genes that are also induced by StSP6A (S. tuberosum SELF-PRUNING 6A), a FLOWERING LOCUS T coregulator that functions as a signal for tuberization. Both enhancement and suppression of StBEL5 expression were also closely linked to StSP6A transcriptional activity. Site mutagenesis in tandem TTGAC motifs located in the upstream sequence of StSP6A suppressed the short day-induced activity of its promoter in both young tubers and leaves. The expression profile of StBEL5 induced in stolons from plants grown under long-day conditions revealed almost 10,000 differentially expressed genes, including important tuber marker genes and genes involved in cell growth, transcription, floral development, and hormone metabolism. In a random screen of 200 differentially expressed targets of StBEL5, 92% contained tandem TTGAC motifs in the upstream sequence within 3 kb of the transcription start site. PMID:26553650

  1. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    SciTech Connect

    Broxton, D.E.; Beyth, M.

    1980-07-01

    Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  2. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Lewistown NTMS Quadrangle, Montana, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-08-01

    Totals of 758 water and 1170 sediment samples were collected from 1649 locations in the Levistown quadrangle. Water samples were collected at streams, springs, wells, ponds, and marshes; sediment samples were obtained from streams, springs, and ponds. Histograms and statistical data for uranium concentrations in water and sediment samples and thorium concentrations in sediment samples are given. All samples were collected at the nominal reconnaissance density of one sample location per 10 km/sup 2/. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters and for sediments. Uranium to thorium (U/Th) ratios for sediment samples are included. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 ppB U were reanalyzed by delayed-neutron counting. Sediments were analyzed for U and Th as well as Al, Sb, Ba, Be, Bi, Cd, Ca, Ce, Cs, Cl, Cr, Co, Cu, Dy, Eu, Au, Hf, Fe, La, Pb, Li, Lu, Mg, Mn, Ni, Nb, K, Rb, Sa, Sc, Ag, Na, Sr, Ta, Tb, Sn, Ti, W, V, Yb, and Zn. All sediments were analyzed for U by delayed neutron counting. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 9 elements, and by arc-source emission spectrography for 2 elements. Analytical results are reported as parts per million. Descriptions of procedures used for analysis of water and sediments samples as well as analytical precisions and detection limits are given.

  3. Molecular cloning and expression of an additional epidermal growth factor receptor-related gene.

    PubMed Central

    Plowman, G D; Whitney, G S; Neubauer, M G; Green, J M; McDonald, V L; Todaro, G J; Shoyab, M

    1990-01-01

    Epidermal growth factor (EGF), transforming growth factor alpha (TGF-alpha), and amphiregulin are structurally and functionally related growth regulatory proteins. These secreted polypeptides all bind to the 170-kDa cell-surface EGF receptor, activating its intrinsic kinase activity. However, amphiregulin exhibits different activities than EGF and TGF-alpha in a number of biological assays. Amphiregulin only partially competes with EGF for binding EGF receptor, and amphiregulin does not induce anchorage-independent growth of normal rat kidney cells (NRK) in the presence of TGF-beta. Amphiregulin also appears to abrogate the stimulatory effect of TGF-alpha on the growth of several aggressive epithelial carcinomas that overexpress EGF receptor. These findings suggest that amphiregulin may interact with a separate receptor in certain cell types. Here we report the cloning of another member of the human EGF receptor (HER) family of receptor tyrosine kinases, which we have named "HER3/ERRB3." The cDNA was isolated from a human carcinoma cell line, and its 6-kilobase transcript was identified in various human tissues. We have generated peptide-specific antisera that recognizes the 160-kDa HER3 protein when transiently expressed in COS cells. These reagents will allow us to determine whether HER3 binds amphiregulin or other growth regulatory proteins and what role HER3 protein plays in the regulation of cell growth. Images PMID:2164210

  4. The Role of Economic Factors, Including the Level of Tuition, in Individual University Participation Decisions in Canada

    ERIC Educational Resources Information Center

    Johnson, David R.; Rahman, Fiona T.

    2005-01-01

    The study uses individual data from the Canadian Labour Force Survey to consider economic factors in university participation decisions by persons aged 17-24 from 1976 to 2003. The level of real tuition is one economic factor that may affect the university participation decision. There is also regional variation in the opportunity cost of…

  5. Aitchbone hanging and ageing period are additive factors influencing pork eating quality.

    PubMed

    Channon, H A; Taverner, M R; D'Souza, D N; Warner, R D

    2014-01-01

    The effects of abattoir, carcase weight (60 or 80 kg HCW), hanging method (Achilles or aitchbone) and ageing period (2 or 7 day post-slaughter) on eating quality attributes of pork were investigated in this 3×2×2×2 factorial study. A total of 144 Large White×Landrace female pigs were slaughtered at one of three abattoirs and sides hung from either the Achilles tendon or the aitchbone. After 24 h chilling, loin (M. longissimus thoracis et lumborum) and topside (M. semimembranosus) muscles were individually vacuum packaged and aged for 2 or 7 days post-slaughter. Consumers (n=852) evaluated eating quality. Neither abattoir nor carcase weight influenced tenderness, flavour or overall liking of pork. Improvements in tenderness, flavour and overall liking were found due to aitchbone hanging (P<0.001) and ageing (P<0.001) for 7 days compared with Achilles-hung carcases and pork aged for 2 days, respectively. This study demonstrated that aitchbone hanging and 7 day ageing can improve eating quality, but these effects were additive as the interaction term was not significant. PMID:24013699

  6. Electrical inhibition of lens epithelial cell proliferation: an additional factor in secondary cataract?

    PubMed Central

    Wang, Entong; Reid, Brian; Lois, Noemi; Forrester, John V.; McCaig, Colin D.; Zhao, Min

    2005-01-01

    Cataract is the most common cause of blindness but is at least curable by surgery. Unfortunately, many patients gradually develop the complication of posterior capsule opacification (PCO) or secondary cataract. This arises from stimulated cell growth within the lens capsule and can greatly impair vision. It is not fully understood why residual lens epithelial cell growth occurs after surgery. We propose and show that cataract surgery might remove an important inhibitory factor for lens cell growth, namely electric fields. The lens generates a unique pattern of electric currents constantly flowing out from the equator and entering the anterior and posterior poles. We show here that cutting and removing part of the anterior capsule as in cataract surgery significantly decreases the equatorial outward electric currents. Application of electric fields in culture inhibits proliferation of human lens epithelial cells. This inhibitory effect is likely to be mediated through a cell cycle control mechanism that decreases entry of cells into S phase from G1 phase by decreasing the G1-specific cell cycle protein cyclin E and increasing the cyclin-Cdk complex inhibitor p27kip1. Capsulorrhexis in vivo, which reduced endogenous lens electric fields, significantly increased LEC growth. This, together with our previous findings that electric fields have significant effects on the direction of lens cell migration, points to a controlling mechanism for the aberrant cell growth in posterior capsule opacification. A novel approach to control growth of lens epithelial cells using electric fields combined with other controlling mechanisms may be more effective in the prevention and treatment of this common complication of cataract surgery. PMID:15764648

  7. Insulin resistance: an additional risk factor in the pathogenesis of cardiovascular disease in type 2 diabetes.

    PubMed

    Patel, Tushar P; Rawal, Komal; Bagchi, Ashim K; Akolkar, Gauri; Bernardes, Nathalia; Dias, Danielle da Silva; Gupta, Sarita; Singal, Pawan K

    2016-01-01

    Sedentary life style and high calorie dietary habits are prominent leading cause of metabolic syndrome in modern world. Obesity plays a central role in occurrence of various diseases like hyperinsulinemia, hyperglycemia and hyperlipidemia, which lead to insulin resistance and metabolic derangements like cardiovascular diseases (CVDs) mediated by oxidative stress. The mortality rate due to CVDs is on the rise in developing countries. Insulin resistance (IR) leads to micro or macro angiopathy, peripheral arterial dysfunction, hampered blood flow, hypertension, as well as the cardiomyocyte and the endothelial cell dysfunctions, thus increasing risk factors for coronary artery blockage, stroke and heart failure suggesting that there is a strong association between IR and CVDs. The plausible linkages between these two pathophysiological conditions are altered levels of insulin signaling proteins such as IR-β, IRS-1, PI3K, Akt, Glut4 and PGC-1α that hamper insulin-mediated glucose uptake as well as other functions of insulin in the cardiomyocytes and the endothelial cells of the heart. Reduced AMPK, PFK-2 and elevated levels of NADP(H)-dependent oxidases produced by activated M1 macrophages of the adipose tissue and elevated levels of circulating angiotensin are also cause of CVD in diabetes mellitus condition. Insulin sensitizers, angiotensin blockers, superoxide scavengers are used as therapeutics in the amelioration of CVD. It evidently becomes important to unravel the mechanisms of the association between IR and CVDs in order to formulate novel efficient drugs to treat patients suffering from insulin resistance-mediated cardiovascular diseases. The possible associations between insulin resistance and cardiovascular diseases are reviewed here. PMID:26542377

  8. Deduction of bond length changes of symmetric molecules from experimental vibrational progressions, including a topological mass factor.

    PubMed

    Su, Jing; Wei, Fan; Schwarz, W H E; Li, Jun

    2012-12-20

    The change ΔR(x) of bond length R(x) for atom X in a molecule upon electronic transition can be derived from the intensities I(i) of the vibrational stretching progression v = 0 → i of the electronic absorption or emission spectrum. In many cases, a simple model is sufficient for a reasonable estimate of ΔR(x). For symmetric molecules, however, conceptual problems in the literature of many decades are evident. The breathing modes of various types of symmetric molecules X(n) and AX(n) (A at the center) are here discussed. In the simplest case of a harmonic vibration of the same mode in the initial and final electronic states, we obtain ΔR(x) ≈ [2S/(ωm(x))](1/2)/w(1/2) (all quantities in atomic units). ω and S are respectively the observed vibrational quanta and the Huang-Rhys factor (corresponding, e.g., to the vibrational intensity ratio I(1)/I(0) ≈ S), m(x) is the mass of vibrating atom X, and w is a topological factor for molecule X(n) or AX(n). The factor 1/w(1/2) in the expression for ΔR(x) must not be neglected. The spectra and bond length changes of several symmetric molecules AX(n) and X(n) are discussed. The experimental bond length changes correctly derived with factor 1/w(1/2) are verified by reliable quantum chemical calculations.

  9. 40 CFR 273.81 - Factors for petitions to include other wastes under 40 CFR part 273.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... group of industries, is commonly generated by a wide variety of types of establishments (including, for... transport; (f) Regulation of the waste or category of waste under 40 CFR part 273 will increase the... wastes under 40 CFR part 273. 273.81 Section 273.81 Protection of Environment ENVIRONMENTAL...

  10. SREB, a GATA Transcription Factor That Directs Disparate Fates in Blastomyces dermatitidis Including Morphogenesis and Siderophore Biosynthesis

    PubMed Central

    Gauthier, Gregory M.; Sullivan, Thomas D.; Gallardo, Sergio S.; Brandhorst, T. Tristan; Vanden Wymelenberg, Amber J.; Cuomo, Christina A.; Suen, Garret; Currie, Cameron R.; Klein, Bruce S.

    2010-01-01

    Blastomyces dermatitidis belongs to a group of human pathogenic fungi that exhibit thermal dimorphism. At 22°C, these fungi grow as mold that produce conidia or infectious particles, whereas at 37°C they convert to budding yeast. The ability to switch between these forms is essential for virulence in mammals and may enable these organisms to survive in the soil. To identify genes that regulate this phase transition, we used Agrobacterium tumefaciens to mutagenize B. dermatitidis conidia and screened transformants for defects in morphogenesis. We found that the GATA transcription factor SREB governs multiple fates in B. dermatitidis: phase transition from yeast to mold, cell growth at 22°C, and biosynthesis of siderophores under iron-replete conditions. Insertional and null mutants fail to convert to mold, do not accumulate significant biomass at 22°C, and are unable to suppress siderophore biosynthesis under iron-replete conditions. The defect in morphogenesis in the SREB mutant was independent of exogenous iron concentration, suggesting that SREB promotes the phase transition by altering the expression of genes that are unrelated to siderophore biosynthesis. Using bioinformatic and gene expression analyses, we identified candidate genes with upstream GATA sites whose expression is altered in the null mutant that may be direct or indirect targets of SREB and promote the phase transition. We conclude that SREB functions as a transcription factor that promotes morphogenesis and regulates siderophore biosynthesis. To our knowledge, this is the first gene identified that promotes the conversion from yeast to mold in the dimorphic fungi, and may shed light on environmental persistence of these pathogens. PMID:20368971

  11. Comparing factor, class, and mixture models of cannabis initiation and DSM cannabis use disorder criteria, including craving, in the Brisbane longitudinal twin study.

    PubMed

    Kubarych, Thomas S; Kendler, Kenneth S; Aggen, Steven H; Estabrook, Ryne; Edwards, Alexis C; Clark, Shaunna L; Martin, Nicholas G; Hickie, Ian B; Neale, Michael C; Gillespie, Nathan A

    2014-04-01

    Accumulating evidence suggests that the Diagnostic and Statistical Manual of Mental Disorders (DSM) diagnostic criteria for cannabis abuse and dependence are best represented by a single underlying factor. However, it remains possible that models with additional factors, or latent class models or hybrid models, may better explain the data. Using structured interviews, 626 adult male and female twins provided complete data on symptoms of cannabis abuse and dependence, plus a craving criterion. We compared latent factor analysis, latent class analysis, and factor mixture modeling using normal theory marginal maximum likelihood for ordinal data. Our aim was to derive a parsimonious, best-fitting cannabis use disorder (CUD) phenotype based on DSM-IV criteria and determine whether DSM-5 craving loads onto a general factor. When compared with latent class and mixture models, factor models provided a better fit to the data. When conditioned on initiation and cannabis use, the association between criteria for abuse, dependence, withdrawal, and craving were best explained by two correlated latent factors for males and females: a general risk factor to CUD and a factor capturing the symptoms of social and occupational impairment as a consequence of frequent use. Secondary analyses revealed a modest increase in the prevalence of DSM-5 CUD compared with DSM-IV cannabis abuse or dependence. It is concluded that, in addition to a general factor with loadings on cannabis use and symptoms of abuse, dependence, withdrawal, and craving, a second clinically relevant factor defined by features of social and occupational impairment was also found for frequent cannabis use. PMID:24588857

  12. The SEB-1 Transcription Factor Binds to the STRE Motif in Neurospora crassa and Regulates a Variety of Cellular Processes Including the Stress Response and Reserve Carbohydrate Metabolism

    PubMed Central

    Freitas, Fernanda Zanolli; Virgilio, Stela; Cupertino, Fernanda Barbosa; Kowbel, David John; Fioramonte, Mariana; Gozzo, Fabio Cesar; Glass, N. Louise; Bertolini, Maria Célia

    2016-01-01

    When exposed to stress conditions, all cells induce mechanisms resulting in an attempt to adapt to stress that involve proteins which, once activated, trigger cell responses by modulating specific signaling pathways. In this work, using a combination of pulldown assays and mass spectrometry analyses, we identified the Neurospora crassa SEB-1 transcription factor that binds to the Stress Response Element (STRE) under heat stress. Orthologs of SEB-1 have been functionally characterized in a few filamentous fungi as being involved in stress responses; however, the molecular mechanisms mediated by this transcription factor may not be conserved. Here, we provide evidences for the involvement of N. crassa SEB-1 in multiple cellular processes, including response to heat, as well as osmotic and oxidative stress. The Δseb-1 strain displayed reduced growth under these conditions, and genes encoding stress-responsive proteins were differentially regulated in the Δseb-1 strain grown under the same conditions. In addition, the SEB-1-GFP protein translocated from the cytosol to the nucleus under heat, osmotic, and oxidative stress conditions. SEB-1 also regulates the metabolism of the reserve carbohydrates glycogen and trehalose under heat stress, suggesting an interconnection between metabolism control and this environmental condition. We demonstrated that SEB-1 binds in vivo to the promoters of genes encoding glycogen metabolism enzymes and regulates their expression. A genome-wide transcriptional profile of the Δseb-1 strain under heat stress was determined by RNA-seq, and a broad range of cellular processes was identified that suggests a role for SEB-1 as a protein interconnecting these mechanisms. PMID:26994287

  13. Low edge safety factor operation and passive disruption avoidance in current carrying plasmas by the addition of stellarator rotational transform

    NASA Astrophysics Data System (ADS)

    Pandya, M. D.; ArchMiller, M. C.; Cianciosa, M. R.; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Hebert, J. D.; Herfindal, J. L.; Knowlton, S. F.; Ma, X.; Massidda, S.; Maurer, D. A.; Roberds, N. A.; Traverso, P. J.

    2015-11-01

    Low edge safety factor operation at a value less than two ( q (a )=1 /ι̷tot(a )<2 ) is routine on the Compact Toroidal Hybrid device with the addition of sufficient external rotational transform. Presently, the operational space of this current carrying stellarator extends down to q (a )=1.2 without significant n = 1 kink mode activity after the initial plasma current rise phase of the discharge. The disruption dynamics of these low edge safety factor plasmas depend upon the fraction of helical field rotational transform from external stellarator coils to that generated by the plasma current. We observe that with approximately 10% of the total rotational transform supplied by the stellarator coils, low edge q disruptions are passively suppressed and avoided even though q(a) < 2. When the plasma does disrupt, the instability precursors measured and implicated as the cause are internal tearing modes with poloidal, m, and toroidal, n, helical mode numbers of m /n =3 /2 and 4/3 observed on external magnetic sensors and m /n =1 /1 activity observed on core soft x-ray emissivity measurements. Even though the edge safety factor passes through and becomes much less than q(a) < 2, external n = 1 kink mode activity does not appear to play a significant role in the disruption phenomenology observed.

  14. A lipid chemotactic factor from anaerobic coryneform bacteria including Corynebacterium parvum with activity for macrophages and monocytes.

    PubMed Central

    Russell, R J; McInroy, R J; Wilkinson, P C; White, R G

    1976-01-01

    A lipid with chemoattractant (chemotactic) activity for mouse and guinea-pig macrophages and for human blood monocytes is released by anaerobic coryneform bacteria (including Corynebacterium parvum). The active lipid is associated with fibrillar structures which lie on the outside of the bacterial cell and are released spontaneously during growth. The lipid can also be extracted easily by a number of methods. The fibrils are loosely associated with a capsule-like structure composed largely of polysaccharide. Purification of the active lipid was achieved by chloroform-methanol extraction of the whole organisms yielding a chloroform-soluble fraction attracting mononuclear phagocytes at concentrations around 10 microgram/ml. The infra-red spectrum of this material showed lipid but no peptide or sugar. Thin-layer chromatography yielded twelve spots of which three had chemoattractant properties. The most active of these gave staining reactions consistent with the presence of phospholipid, the other two probably contained free fatty acids and triglycerides. Thin-layer electrophoresis also yielded an active phosphorus-containing spot. Saturated fatty acids of chain lengths found in the anaerobic coryne forms had weak monocyte-attractant activity. As the active material was progressively purified, its activity as a monocyte attractant weakened. Images Figure 2 Figure 3 Figure 4 PMID:1027716

  15. A3 domain region 1803-1818 contributes to the stability of activated factor VIII and includes a binding site for activated factor IX.

    PubMed

    Bloem, Esther; Meems, Henriet; van den Biggelaar, Maartje; Mertens, Koen; Meijer, Alexander B

    2013-09-01

    A recent chemical footprinting study in our laboratory suggested that region 1803-1818 might contribute to A2 domain retention in activated factor VIII (FVIIIa). This site has also been implicated to interact with activated factor IX (FIXa). Asn-1810 further comprises an N-linked glycan, which seems incompatible with a role of the amino acids 1803-1818 for FIXa or A2 domain binding. In the present study, FVIIIa stability and FIXa binding were evaluated in a FVIII-N1810C variant, and two FVIII variants in which residues 1803-1810 and 1811-1818 are replaced by the corresponding residues of factor V (FV). Enzyme kinetic studies showed that only FVIII/FV 1811-1818 has a decreased apparent binding affinity for FIXa. Flow cytometry analysis indicated that fluorescent FIXa exhibits impaired complex formation with only FVIII/FV 1811-1818 on lipospheres. Site-directed mutagenesis revealed that Phe-1816 contributes to the interaction with FIXa. To evaluate FVIIIa stability, the FVIII/FV chimeras were activated by thrombin, and the decline in cofactor function was followed over time. FVIII/FV 1803-1810 and FVIII/FV 1811-1818 but not FVIII-N1810C showed a decreased FVIIIa half-life. However, when the FVIII variants were activated in presence of FIXa, only FVIII/FV 1811-1818 demonstrated an enhanced decline in cofactor function. Surface plasmon resonance analysis revealed that the FVIII variants K1813A/K1818A, E1811A, and F1816A exhibit enhanced dissociation after activation. The results together demonstrate that the glycan at 1810 is not involved in FVIII cofactor function, and that Phe-1816 of region 1811-1818 contributes to FIXa binding. Both regions 1803-1810 and 1811-1818 contribute to FVIIIa stability.

  16. A3 domain region 1803-1818 contributes to the stability of activated factor VIII and includes a binding site for activated factor IX.

    PubMed

    Bloem, Esther; Meems, Henriet; van den Biggelaar, Maartje; Mertens, Koen; Meijer, Alexander B

    2013-09-01

    A recent chemical footprinting study in our laboratory suggested that region 1803-1818 might contribute to A2 domain retention in activated factor VIII (FVIIIa). This site has also been implicated to interact with activated factor IX (FIXa). Asn-1810 further comprises an N-linked glycan, which seems incompatible with a role of the amino acids 1803-1818 for FIXa or A2 domain binding. In the present study, FVIIIa stability and FIXa binding were evaluated in a FVIII-N1810C variant, and two FVIII variants in which residues 1803-1810 and 1811-1818 are replaced by the corresponding residues of factor V (FV). Enzyme kinetic studies showed that only FVIII/FV 1811-1818 has a decreased apparent binding affinity for FIXa. Flow cytometry analysis indicated that fluorescent FIXa exhibits impaired complex formation with only FVIII/FV 1811-1818 on lipospheres. Site-directed mutagenesis revealed that Phe-1816 contributes to the interaction with FIXa. To evaluate FVIIIa stability, the FVIII/FV chimeras were activated by thrombin, and the decline in cofactor function was followed over time. FVIII/FV 1803-1810 and FVIII/FV 1811-1818 but not FVIII-N1810C showed a decreased FVIIIa half-life. However, when the FVIII variants were activated in presence of FIXa, only FVIII/FV 1811-1818 demonstrated an enhanced decline in cofactor function. Surface plasmon resonance analysis revealed that the FVIII variants K1813A/K1818A, E1811A, and F1816A exhibit enhanced dissociation after activation. The results together demonstrate that the glycan at 1810 is not involved in FVIII cofactor function, and that Phe-1816 of region 1811-1818 contributes to FIXa binding. Both regions 1803-1810 and 1811-1818 contribute to FVIIIa stability. PMID:23884417

  17. A3 Domain Region 1803–1818 Contributes to the Stability of Activated Factor VIII and Includes a Binding Site for Activated Factor IX

    PubMed Central

    Bloem, Esther; Meems, Henriet; van den Biggelaar, Maartje; Mertens, Koen; Meijer, Alexander B.

    2013-01-01

    A recent chemical footprinting study in our laboratory suggested that region 1803–1818 might contribute to A2 domain retention in activated factor VIII (FVIIIa). This site has also been implicated to interact with activated factor IX (FIXa). Asn-1810 further comprises an N-linked glycan, which seems incompatible with a role of the amino acids 1803–1818 for FIXa or A2 domain binding. In the present study, FVIIIa stability and FIXa binding were evaluated in a FVIII-N1810C variant, and two FVIII variants in which residues 1803–1810 and 1811–1818 are replaced by the corresponding residues of factor V (FV). Enzyme kinetic studies showed that only FVIII/FV 1811–1818 has a decreased apparent binding affinity for FIXa. Flow cytometry analysis indicated that fluorescent FIXa exhibits impaired complex formation with only FVIII/FV 1811–1818 on lipospheres. Site-directed mutagenesis revealed that Phe-1816 contributes to the interaction with FIXa. To evaluate FVIIIa stability, the FVIII/FV chimeras were activated by thrombin, and the decline in cofactor function was followed over time. FVIII/FV 1803–1810 and FVIII/FV 1811–1818 but not FVIII-N1810C showed a decreased FVIIIa half-life. However, when the FVIII variants were activated in presence of FIXa, only FVIII/FV 1811–1818 demonstrated an enhanced decline in cofactor function. Surface plasmon resonance analysis revealed that the FVIII variants K1813A/K1818A, E1811A, and F1816A exhibit enhanced dissociation after activation. The results together demonstrate that the glycan at 1810 is not involved in FVIII cofactor function, and that Phe-1816 of region 1811–1818 contributes to FIXa binding. Both regions 1803–1810 and 1811–1818 contribute to FVIIIa stability. PMID:23884417

  18. 25 CFR 39.1101 - Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in fiscal year 1982. 39.1101 Section 39.1101 Indians BUREAU OF INDIAN... Programs § 39.1101 Addition of pre-kindergarten as a weight factor to the Indian School...

  19. 25 CFR 39.1101 - Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in fiscal year 1982. 39.1101 Section 39.1101 Indians BUREAU OF INDIAN... Programs § 39.1101 Addition of pre-kindergarten as a weight factor to the Indian School...

  20. 25 CFR 39.1101 - Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in fiscal year 1982. 39.1101 Section 39.1101 Indians BUREAU OF INDIAN... Programs § 39.1101 Addition of pre-kindergarten as a weight factor to the Indian School...

  1. 25 CFR 39.1101 - Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in fiscal year 1982. 39.1101 Section 39.1101 Indians BUREAU OF INDIAN... Programs § 39.1101 Addition of pre-kindergarten as a weight factor to the Indian School...

  2. 25 CFR 39.1101 - Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Addition of pre-kindergarten as a weight factor to the Indian School Equalization Formula in fiscal year 1982. 39.1101 Section 39.1101 Indians BUREAU OF INDIAN... Programs § 39.1101 Addition of pre-kindergarten as a weight factor to the Indian School...

  3. Laser Microdissection Unravels Cell-Type-Specific Transcription in Arbuscular Mycorrhizal Roots, Including CAAT-Box Transcription Factor Gene Expression Correlating with Fungal Contact and Spread1[W

    PubMed Central

    Hogekamp, Claudia; Arndt, Damaris; Pereira, Patrícia A.; Becker, Jörg D.; Hohnjec, Natalija; Küster, Helge

    2011-01-01

    Arbuscular mycorrhizae (AM) are the most widespread symbioses on Earth, promoting nutrient supply of most terrestrial plant species. To unravel gene expression in defined stages of Medicago truncatula root colonization by AM fungi, we here combined genome-wide transcriptome profiling based on whole mycorrhizal roots with real-time reverse transcription-PCR experiments that relied on characteristic cell types obtained via laser microdissection. Our genome-wide approach delivered a core set of 512 genes significantly activated by the two mycorrhizal fungi Glomus intraradices and Glomus mossae. Focusing on 62 of these genes being related to membrane transport, signaling, and transcriptional regulation, we distinguished whether they are activated in arbuscule-containing or the neighboring cortical cells harboring fungal hyphae. In addition, cortical cells from nonmycorrhizal roots served as a reference for gene expression under noncolonized conditions. Our analysis identified 25 novel arbuscule-specific genes and 37 genes expressed both in the arbuscule-containing and the adjacent cortical cells colonized by fungal hyphae. Among the AM-induced genes specifying transcriptional regulators were two members encoding CAAT-box binding transcription factors (CBFs), designated MtCbf1 and MtCbf2. Promoter analyses demonstrated that both genes were already activated by the first physical contact between the symbionts. Subsequently, and corresponding to our cell-type expression patterns, they were progressively up-regulated in those cortical areas colonized by fungal hyphae, including the arbuscule-containing cells. The encoded CBFs thus represent excellent candidates for regulators that mediate a sequential reprogramming of root tissues during the establishment of an AM symbiosis. PMID:22034628

  4. Sodium Benzoate, a Metabolite of Cinnamon and a Food Additive, Upregulates Ciliary Neurotrophic Factor in Astrocytes and Oligodendrocytes.

    PubMed

    Modi, Khushbu K; Jana, Malabendu; Mondal, Susanta; Pahan, Kalipada

    2015-11-01

    Ciliary neurotrophic factor (CNTF) is a promyelinating trophic factor that plays an important role in multiple sclerosis (MS). However, mechanisms by which CNTF expression could be increased in the brain are poorly understood. Recently we have discovered anti-inflammatory and immunomodulatory activities of sodium benzoate (NaB), a metabolite of cinnamon and a widely-used food additive. Here, we delineate that NaB is also capable of increasing the mRNA and protein expression of CNTF in primary mouse astrocytes and oligodendrocytes and primary human astrocytes. Accordingly, oral administration of NaB and cinnamon led to the upregulation of astroglial and oligodendroglial CNTF in vivo in mouse brain. Induction of experimental allergic encephalomyelitis, an animal model of MS, reduced the level of CNTF in the brain, which was restored by oral administration of cinnamon. While investigating underlying mechanisms, we observed that NaB induced the activation of protein kinase A (PKA) and H-89, an inhibitor of PKA, abrogated NaB-induced expression of CNTF. The activation of cAMP response element binding (CREB) protein by NaB, the recruitment of CREB and CREB-binding protein to the CNTF promoter by NaB and the abrogation of NaB-induced expression of CNTF in astrocytes by siRNA knockdown of CREB suggest that NaB increases the expression of CNTF via the activation of CREB. These results highlight a novel myelinogenic property of NaB and cinnamon, which may be of benefit for MS and other demyelinating disorders.

  5. Additional cytosine inside mitochondrial C-tract D-loop as a progression risk factor in oral precancer cases

    PubMed Central

    Pandey, Rahul; Mehrotra, Divya; Mahdi, Abbas Ali; Sarin, Rajiv; Kowtal, Pradnya

    2014-01-01

    Introduction Alterations inside Polycytosine tract (C-tract) of mitochondrial DNA (mtDNA) have been described in many different tumor types. The Poly-Cytosine region is located within the mtDNA D-loop region which acts as point of mitochondrial replication origin. A suggested pathogenesis is that it interferes with the replication process of mtDNA which in turn affects the mitochondrial functioning and generates disease. Methodology 100 premalignant cases (50 leukoplakia & 50 oral submucous fibrosis) were selected and the mitochondrial DNA were isolated from the lesion tissues and from the blood samples. Polycytosine tract in mtDNA was sequenced by direct capillary sequencing. Results 40 (25 leukoplakia & 15 oral submucous fibrosis) patients harbored lesions that displayed one additional cytosine after nucleotide thymidine (7CT6C) at nt position 316 in C-tract of mtDNA which were absent in corresponding mtDNA derived from blood samples. Conclusion Our results show an additional cytosine in the mtDNA at polycytosine site in oral precancer cases. It is postulated that any increase/decrease in the number of cytosine residues in the Poly-Cytosine region may affect the rate of mtDNA replication by impairing the binding of polymerase and other transacting factors. By promoting mitochondrial genomic instability, it may have a central role in the dysregulation of mtDNA functioning, for example alterations in energy metabolism that may promote tumor development. We, therefore, report and propose that this alteration may represent the early development of oral cancer. Further studies with large number of samples are needed in to confirm the role of such mutation in carcinogenesis. PMID:25737911

  6. SWI/SNF factors required for cellular resistance to DNA damage include ARID1A and ARID1B and show interdependent protein stability.

    PubMed

    Watanabe, Reiko; Ui, Ayako; Kanno, Shin-Ichiro; Ogiwara, Hideaki; Nagase, Takahiro; Kohno, Takashi; Yasui, Akira

    2014-05-01

    The SWI/SNF chromatin-remodeling family contains various protein complexes, which regulate gene expression during cellular development and influence DNA damage response in an ATP- and complex-dependent manner, of which details remain elusive. Recent human genome sequencing of various cancer cells revealed frequent mutations in SWI/SNF factors, especially ARID1A, a variant subunit in the BRG1-associated factor (BAF) complex of the SWI/SNF family. We combined live-cell analysis and gene-suppression experiments to show that suppression of either ARID1A or its paralog ARID1B led to reduced nonhomologous end joining activity of DNA double-strand breaks (DSB), decreased accumulation of KU70/KU80 proteins at DSB, and sensitivity to ionizing radiation, as well as to cisplatin and UV. Thus, in contrast to transcriptional regulation, both ARID1 proteins are required for cellular resistance to various types of DNA damage, including DSB. The suppression of other SWI/SNF factors, namely SNF5, BAF60a, BAF60c, BAF155, or BAF170, exhibits a similar phenotype. Of these factors, ARID1A, ARID1B, SNF5, and BAF60c are necessary for the immediate recruitment of the ATPase subunit of the SWI/SNF complex to DSB, arguing that both ARID1 proteins facilitate the damage response of the complex. Finally, we found interdependent protein stability among the SWI/SNF factors, suggesting their direct interaction within the complex and the reason why multiple factors are frequently lost in parallel in cancer cells. Taken together, we show that cancer cells lacking in the expression of certain SWI/SNF factors, including ARID1A, are deficient in DNA repair and potentially vulnerable to DNA damage.

  7. Outpatient Management of Postbiopsy Pneumothorax with Small-Caliber Chest Tubes: Factors Affecting the Need for Prolonged Drainage and Additional Interventions

    SciTech Connect

    Gupta, Sanjay Hicks, Marshall E.; Wallace, Michael J.; Ahrar, Kamran; Madoff, David C.; Murthy, Ravi

    2008-03-15

    The aim of this study was to evaluate the efficacy of outpatient management of postbiopsy pneumothoraces with small-caliber chest tubes and to assess the factors that influence the need for prolonged drainage or additional interventions.We evaluated the medical records of patients who were treated with small-caliber chest tubes attached to Heimlich valves for pneumothoraces resulting from image-guided transthoracic needle biopsy to determine the hospital admission rates, the number of days the catheters were left in place, and the need for further interventions. We also evaluated the patient, lesion, and biopsy technique characteristics to determine their influence on the need for prolonged catheter drainage or additional interventions. Of the 191 patients included in our study, 178 (93.2%) were treated as outpatients. Ten patients (5.2%) were admitted for chest tube-related problems, either for underwater suction (n = 8) or for pain control (n = 2). No further interventions were required in 146 patients (76.4%), with successful removal of the chest tubes the day after the biopsy procedure. Prolonged catheter drainage (mean, 4.3 days) was required in 44 patients (23%). Nineteen patients (9.9%) underwent additional interventions for management of pneumothorax. Presence of emphysema was noted more frequently in patients who required additional interventions or prolonged chest tube drainage than in those who did not (51.1% vs. 24.7%; p = 0.001).We conclude that use of the Heimlich valve allows safe and successful outpatient treatment of most patients requiring chest tube placement for postbiopsy pneumothorax. Additional interventions or prolonged chest tube drainage are needed more frequently in patients with emphysema in the needle path.

  8. Effects of Factor XIII Deficiency on Thromboelastography. Thromboelastography with Calcium and Streptokinase Addition is more Sensitive than Solubility Tests

    PubMed Central

    Martinuzzo, M.; Barrera, L.; Altuna, D.; Baña, F. Tisi; Bieti, J.; Amigo, Q.; D’Adamo, M.; López, M.S.; Oyhamburu, J.; Otaso, J.C.

    2016-01-01

    Background Homozygous or double heterozygous factor XIII (FXIII) deficiency is characterized by soft tissue hematomas, intracranial and delayed spontaneous bleeding. Alterations of thromboelastography (TEG) parameters in these patients have been reported. The aim of the study was to show results of TEG, TEG Lysis (Lys 60) induced by subthreshold concentrations of streptokinase (SK), and to compare them to the clot solubility studies results in samples of a 1-year-old girl with homozygous or double heterozygous FXIII deficiency. Case A year one girl with a history of bleeding from the umbilical cord. During her first year of life, several hematomas appeared in soft upper limb tissue after punctures for vaccination and a gluteal hematoma. One additional sample of a heterozygous patient and three samples of acquired FXIII deficiency were also evaluated. Materials and Methods Clotting tests, von Willebrand factor (vWF) antigen and activity, plasma FXIII-A subunit (pFXIII-A) were measured by an immunoturbidimetric assay in a photo-optical coagulometer. Solubility tests were performed with Ca2+-5 M urea and thrombin-2% acetic acid. Basal and post-FXIII concentrate infusion samples were studied. TEG was performed with CaCl2 or CaCl2 + SK (3.2 U/mL) in a Thromboelastograph. Results Prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time, fibrinogen, factor VIIIc, vWF, and platelet aggregation were normal. Antigenic pFXIII-A subunit was < 2%. TEG, evaluated at diagnosis and post FXIII concentrate infusion (pFXIII-A= 37%), presented a normal reaction time (R), 8 min, prolonged k (14 and 11min respectively), a low Maximum-Amplitude (MA) ( 39 and 52 mm respectively), and Clot Lysis (Lys60) slightly increased (23 and 30% respectively). In the sample at diagnosis, clot solubility was abnormal, 50 and 45 min with Ca-Urea and thrombin-acetic acid, respectively, but normal (>16 hours) 1-day post-FXIII infusion. Analysis of FXIII deficient and normal

  9. Effects of Factor XIII Deficiency on Thromboelastography. Thromboelastography with Calcium and Streptokinase Addition is more Sensitive than Solubility Tests

    PubMed Central

    Martinuzzo, M.; Barrera, L.; Altuna, D.; Baña, F. Tisi; Bieti, J.; Amigo, Q.; D’Adamo, M.; López, M.S.; Oyhamburu, J.; Otaso, J.C.

    2016-01-01

    Background Homozygous or double heterozygous factor XIII (FXIII) deficiency is characterized by soft tissue hematomas, intracranial and delayed spontaneous bleeding. Alterations of thromboelastography (TEG) parameters in these patients have been reported. The aim of the study was to show results of TEG, TEG Lysis (Lys 60) induced by subthreshold concentrations of streptokinase (SK), and to compare them to the clot solubility studies results in samples of a 1-year-old girl with homozygous or double heterozygous FXIII deficiency. Case A year one girl with a history of bleeding from the umbilical cord. During her first year of life, several hematomas appeared in soft upper limb tissue after punctures for vaccination and a gluteal hematoma. One additional sample of a heterozygous patient and three samples of acquired FXIII deficiency were also evaluated. Materials and Methods Clotting tests, von Willebrand factor (vWF) antigen and activity, plasma FXIII-A subunit (pFXIII-A) were measured by an immunoturbidimetric assay in a photo-optical coagulometer. Solubility tests were performed with Ca2+-5 M urea and thrombin-2% acetic acid. Basal and post-FXIII concentrate infusion samples were studied. TEG was performed with CaCl2 or CaCl2 + SK (3.2 U/mL) in a Thromboelastograph. Results Prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time, fibrinogen, factor VIIIc, vWF, and platelet aggregation were normal. Antigenic pFXIII-A subunit was < 2%. TEG, evaluated at diagnosis and post FXIII concentrate infusion (pFXIII-A= 37%), presented a normal reaction time (R), 8 min, prolonged k (14 and 11min respectively), a low Maximum-Amplitude (MA) ( 39 and 52 mm respectively), and Clot Lysis (Lys60) slightly increased (23 and 30% respectively). In the sample at diagnosis, clot solubility was abnormal, 50 and 45 min with Ca-Urea and thrombin-acetic acid, respectively, but normal (>16 hours) 1-day post-FXIII infusion. Analysis of FXIII deficient and normal

  10. Symbolic integration of a product of two spherical Bessel functions with an additional exponential and polynomial factor

    NASA Astrophysics Data System (ADS)

    Gebremariam, B.; Duguet, T.; Bogner, S. K.

    2010-06-01

    We present a Mathematica package that performs the symbolic calculation of integrals of the form ∫0∞exj(x)j(x)dx where j(x) and j(x) denote spherical Bessel functions of integer orders, with ν⩾0 and μ⩾0. With the real parameter u>0 and the integer n, convergence of the integral requires that n+ν+μ⩾0. The package provides analytical result for the integral in its most simplified form. In cases where direct Mathematica implementations succeed in evaluating these integrals, the novel symbolic method implemented in this work obtains the same result and in general, it takes a fraction of the time required for the direct implementation. We test the accuracy of such analytical expressions by comparing the results with their numerical counterparts. Program summaryProgram title: SymbBesselJInteg Catalogue identifier: AEFY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 275 934 No. of bytes in distributed program, including test data, etc.: 399 705 Distribution format: tar.gz Programming language: Mathematica 7.1 Computer: Any computer running Mathematica 6.0 and later versions. Operating system: Windows Xp, Linux/Unix. RAM: 256 Mb Classification: 5. Nature of problem: Integration, both analytical and numerical, of products of two spherical Bessel functions with an exponential and polynomial multiplying factor can be a very complex task depending on the orders of the spherical Bessel functions. The Mathematica package discussed in this paper solves this problem using a novel symbolic approach. Solution method: The problem is first cast into a related limit problem which can be broken into two related subproblems involving exponential and exponential integral functions. Solving the cores of each

  11. Additive influence of genetic predisposition and conventional risk factors in the incidence of coronary heart disease: a population-based study in Greece

    PubMed Central

    Yiannakouris, Nikos; Katsoulis, Michail; Trichopoulou, Antonia; Ordovas, Jose M; Trichopoulos, Dimitrios

    2014-01-01

    Objectives An additive genetic risk score (GRS) for coronary heart disease (CHD) has previously been associated with incident CHD in the population-based Greek European Prospective Investigation into Cancer and nutrition (EPIC) cohort. In this study, we explore GRS-‘environment’ joint actions on CHD for several conventional cardiovascular risk factors (ConvRFs), including smoking, hypertension, type-2 diabetes mellitus (T2DM), body mass index (BMI), physical activity and adherence to the Mediterranean diet. Design A case–control study. Setting The general Greek population of the EPIC study. Participants and outcome measures 477 patients with medically confirmed incident CHD and 1271 controls participated in this study. We estimated the ORs for CHD by dividing participants at higher or lower GRS and, alternatively, at higher or lower ConvRF, and calculated the relative excess risk due to interaction (RERI) as a measure of deviation from additivity. Results The joint presence of higher GRS and higher risk ConvRF was in all instances associated with an increased risk of CHD, compared with the joint presence of lower GRS and lower risk ConvRF. The OR (95% CI) was 1.7 (1.2 to 2.4) for smoking, 2.7 (1.9 to 3.8) for hypertension, 4.1 (2.8 to 6.1) for T2DM, 1.9 (1.4 to 2.5) for lower physical activity, 2.0 (1.3 to 3.2) for high BMI and 1.5 (1.1 to 2.1) for poor adherence to the Mediterranean diet. In all instances, RERI values were fairly small and not statistically significant, suggesting that the GRS and the ConvRFs do not have effects beyond additivity. Conclusions Genetic predisposition to CHD, operationalised through a multilocus GRS, and ConvRFs have essentially additive effects on CHD risk. PMID:24500614

  12. batman Interacts with polycomb and trithorax group genes and encodes a BTB/POZ protein that is included in a complex containing GAGA factor.

    PubMed

    Faucheux, M; Roignant, J-Y; Netter, S; Charollais, J; Antoniewski, C; Théodore, L

    2003-02-01

    Polycomb and trithorax group genes maintain the appropriate repressed or activated state of homeotic gene expression throughout Drosophila melanogaster development. We have previously identified the batman gene as a Polycomb group candidate since its function is necessary for the repression of Sex combs reduced. However, our present genetic analysis indicates functions of batman in both activation and repression of homeotic genes. The 127-amino-acid Batman protein is almost reduced to a BTB/POZ domain, an evolutionary conserved protein-protein interaction domain found in a large protein family. We show that this domain is involved in the interaction between Batman and the DNA binding GAGA factor encoded by the Trithorax-like gene. The GAGA factor and Batman codistribute on polytene chromosomes, coimmunoprecipitate from nuclear embryonic and larval extracts, and interact in the yeast two-hybrid assay. Batman, together with the GAGA factor, binds to MHS-70, a 70-bp fragment of the bithoraxoid Polycomb response element. This binding, like that of the GAGA factor, requires the presence of d(GA)n sequences. Together, our results suggest that batman belongs to a subset of the Polycomb/trithorax group of genes that includes Trithorax-like, whose products are involved in both activation and repression of homeotic genes.

  13. An ab initio calculation of magnetic structure factors for Cs3CoCl5 including spin-orbit and finite magnetic field effects

    NASA Astrophysics Data System (ADS)

    Wolff, Stephen K.; Jayatilaka, Dylan; Chandler, Graham S.

    1995-09-01

    Spin-orbit interaction plays a significant role in determining the magnetic density in some transition metal complexes. We present a new ab initio technique, based on an extension of unrestricted Hartree-Fock theory, which includes nonperturbatively these spin-orbit effects, and simultaneously also the effects of a finite magnetic field. We also present a new and efficient method for calculating magnetic structure factors, based on the current density rather than magnetic dipole moment density, for a crystal composed of noninteracting molecular fragments. These structure factors are directly comparable to polarized neutron diffraction experiments. Results for the Cs3CoCl5 crystal are compared with experiment and previous studies. Without one-electron spin-orbit coupling terms, the magnitudes of the predicted structure factors are on average 10-15 % too low, whereas, with the spin-orbit terms, the magnitudes are 25-30% too high. Using an effective nuclear charge for Co in the spin-orbit term brings the results into much better agreement, and suggests that the two-electron spin-orbit shielding terms omitted in the present work are important. For over one quarter of the reflections studied, the magnetic contribution to the structure factors is more than 20% of the nuclear contribution.

  14. Mexican American First-Generation Students' Perceptions of Siblings and Additional Factors Influencing Their College Choice Process

    ERIC Educational Resources Information Center

    Elias McAllister, Dora

    2012-01-01

    The purpose of this study was to understand the factors influencing the college choice process of Mexican American first-generation students who had an older sibling with college experience. While a considerable amount of research exists on factors influencing the college choice process of first-generation college students, and a few studies…

  15. Association between Cerebral Amyloid Deposition and Clinical Factors Including Cognitive Function in Geriatric Depression: Pilot Study Using Amyloid Positron Emission Tomography

    PubMed Central

    Kim, Hye-Geum; Kong, Eun-Jung; Cheon, Eun-Jin; Kim, Hae-Won; Koo, Bon-Hoon

    2016-01-01

    The purpose of this study was to explore the relationship between cerebral amyloid deposition and overall clinical factors including cognitive functions in geriatric depression by using 18F-florbetaben positron emission tomography. Thirteen subjects aged over 60 years who had a history of major depressive disorder and also had subjective memory complaint were included. Of all subjects, 3 subjects judged as amyloid positive, and the others judged as amyloid negative. Their memory, visuospatial functions and attention abilities were negatively correlated with amyloid deposition in specific brain regions, but their language and recognition abilities were not correlated with any region. The amyloid deposition of the whole brain region was significantly negatively correlated with immediate memory. PMID:27776391

  16. Measurement of factor VIII activity using one-stage clotting assay: a calibration curve has not to be systematically included in each run.

    PubMed

    Lattes, S; Appert-Flory, A; Fischer, F; Jambou, D; Toulon, P

    2011-01-01

    Coagulation factor VIII (FVIII) is usually evaluated using activated partial thromboplastin time-based one-stage clotting assays. Guidelines for clotting factor assays indicate that a calibration curve should be included each time the assay is performed. Therefore, FVIII measurement is expensive, reagent- and time-consuming. The aim of this study was to compare FVIII activities obtained using the same fully automated assay that was calibrated once (stored calibration curve) or each time the assay was performed. Unique lots of reagents were used throughout the study. We analysed 255 frozen plasma samples from patients who were prescribed FVIII measurement including treated and untreated haemophilia A patients. Twenty-six runs were performed on a 28-week period, each including four lyophilized control and at most 10 patient plasma samples. In control samples, FVIII activities were not significantly different when the assay was performed using the stored calibration curve or was daily calibrated. The same applied to FVIII activities in patient plasma samples that were not significantly different throughout the measuring range of activities [68.3% (<1-179) vs. 67.6% (<1-177), P=0.48] and no relevant bias could be demonstrated when data were compared according to Bland and Altman. These results suggest that in the studied technical conditions, performing the FVIII assay using a stored calibration curve is reliable, for at least 6 months. Therefore, as far as the same lots of reagents are used, it is not mandatory to include a calibration curve each time the FVIII assay was performed. However, this strategy has to be validated if the assay is performed in different technical conditions.

  17. A Risk Score with Additional Four Independent Factors to Predict the Incidence and Recovery from Metabolic Syndrome: Development and Validation in Large Japanese Cohorts

    PubMed Central

    Obokata, Masaru; Negishi, Kazuaki; Ohyama, Yoshiaki; Okada, Haruka; Imai, Kunihiko; Kurabayashi, Masahiko

    2015-01-01

    Background Although many risk factors for Metabolic syndrome (MetS) have been reported, there is no clinical score that predicts its incidence. The purposes of this study were to create and validate a risk score for predicting both incidence and recovery from MetS in a large cohort. Methods Subjects without MetS at enrollment (n = 13,634) were randomly divided into 2 groups and followed to record incidence of MetS. We also examined recovery from it in rest 2,743 individuals with prevalent MetS. Results During median follow-up of 3.0 years, 878 subjects in the derivation and 757 in validation cohorts developed MetS. Multiple logistic regression analysis identified 12 independent variables from the derivation cohort and initial score for subsequent MetS was created, which showed good discrimination both in the derivation (c-statistics 0.82) and validation cohorts (0.83). The predictability of the initial score for recovery from MetS was tested in the 2,743 MetS population (906 subjects recovered from MetS), where nine variables (including age, sex, γ-glutamyl transpeptidase, uric acid and five MetS diagnostic criteria constituents.) remained significant. Then, the final score was created using the nine variables. This score significantly predicted both the recovery from MetS (c-statistics 0.70, p<0.001, 78% sensitivity and 54% specificity) and incident MetS (c-statistics 0.80) with an incremental discriminative ability over the model derived from five factors used in the diagnosis of MetS (continuous net reclassification improvement: 0.35, p < 0.001 and integrated discrimination improvement: 0.01, p<0.001). Conclusions We identified four additional independent risk factors associated with subsequent MetS, developed and validated a risk score to predict both incident and recovery from MetS. PMID:26230621

  18. Characterization of a Bacillus subtilis sporulation operon that includes genes for an RNA polymerase sigma factor and for a putative DD-carboxypeptidase.

    PubMed Central

    Wu, J J; Schuch, R; Piggot, P J

    1992-01-01

    At early stages of sporulation, the spoIIA locus is transcribed as a tricistronic (1.7-kb) operon, coding for sigma F and for two proteins that modulate the activity of sigma F. The locus is transcribed as a longer (2.9-kb) transcript at the late stages of sporulation. We show here that the longer transcript contains an additional open reading frame whose product has extensive sequence homology with DD-carboxypeptidases; the corresponding gene is designated dacF. Cotranscription of a morphogene, such as dacF, with the gene for a sigma factor suggests a way to couple transcription regulation with morphogenesis. The predicted N-terminal sequence of the DacF protein and the inhibition of sporulation by a translational dacF-lacZ fusion both suggest that the protein has a signal peptide for transport into or across a membrane. Expression of a dacF-lacZ transcriptional fusion was in the forespore. The 5' end of the 2.9-kb transcript was determined by primer extension analysis. The region 5' to the end showed no homology to promoters recognized by known sigma factors but was homologous to the corresponding region of the forespore-specific 0.3-kb gene of Bacillus subtilis. Images PMID:1629150

  19. Evaluation of the predisposing factors and involved outcome of surgical treatment in bisphosphonate-related osteonecrosis of the jaw cases including bone biopsies

    PubMed Central

    2016-01-01

    Objectives This study examined the statistical relevance of whether the systemic predisposing factors affect the prognosis of surgical treatment of bisphosphonate-related osteonecrosis of the jaw (BRONJ). All cases had undergone bone biopsies to determine the characteristics of the mechanisms of BRONJ by optical microscopy. Materials and Methods The data included 54 BRONJ cases who underwent surgery and in whom bone biopsies were performed. The results of surgery were evaluated and the results were classified into 3 categories: normal recovery, delayed recovery, and recurrence after surgery. The medical history, such as diabetes mellitus, medication of steroids, malignancies on other sites was investigated for an evaluation of the systemic predisposing factors in relation to the prognosis. The three factors involved with the medication of bisphosphonate (BP) were the medication route, medication period, and drug holiday of BP before surgery. The serum C-terminal cross-linking telopeptide (CTX) value and presence of microorganism colony in bone biopsy specimens were also checked. Statistical analysis was then carried out to determine the relationship between these factors and the results of surgery. Results The group of patients suffering from diabetes and on steroids tended to show poorer results after surgery. Parenteral medication of BP made the patients have a poorer prognosis after surgery than oral medication. In contrast, the medication period and drug holiday of BP before surgery did not have significance with the results of surgery nor did the serum CTX value and presence of microorganism colony. Necrotic bone specimens in this study typically showed disappearing new bone formation around the osteocytic lacunae and destroyed Howship's lacunae. Conclusion Although many variables exist, this study could in part, predict the prognosis of surgical treatment of BRONJ by taking the patient's medical history.

  20. Evaluation of the predisposing factors and involved outcome of surgical treatment in bisphosphonate-related osteonecrosis of the jaw cases including bone biopsies

    PubMed Central

    2016-01-01

    Objectives This study examined the statistical relevance of whether the systemic predisposing factors affect the prognosis of surgical treatment of bisphosphonate-related osteonecrosis of the jaw (BRONJ). All cases had undergone bone biopsies to determine the characteristics of the mechanisms of BRONJ by optical microscopy. Materials and Methods The data included 54 BRONJ cases who underwent surgery and in whom bone biopsies were performed. The results of surgery were evaluated and the results were classified into 3 categories: normal recovery, delayed recovery, and recurrence after surgery. The medical history, such as diabetes mellitus, medication of steroids, malignancies on other sites was investigated for an evaluation of the systemic predisposing factors in relation to the prognosis. The three factors involved with the medication of bisphosphonate (BP) were the medication route, medication period, and drug holiday of BP before surgery. The serum C-terminal cross-linking telopeptide (CTX) value and presence of microorganism colony in bone biopsy specimens were also checked. Statistical analysis was then carried out to determine the relationship between these factors and the results of surgery. Results The group of patients suffering from diabetes and on steroids tended to show poorer results after surgery. Parenteral medication of BP made the patients have a poorer prognosis after surgery than oral medication. In contrast, the medication period and drug holiday of BP before surgery did not have significance with the results of surgery nor did the serum CTX value and presence of microorganism colony. Necrotic bone specimens in this study typically showed disappearing new bone formation around the osteocytic lacunae and destroyed Howship's lacunae. Conclusion Although many variables exist, this study could in part, predict the prognosis of surgical treatment of BRONJ by taking the patient's medical history. PMID:27595086

  1. An Additional Potential Factor for Kidney Stone Formation during Space Flights: Calcifying Nanoparticles (Nanobacteria): A Case Report

    NASA Technical Reports Server (NTRS)

    Jones, Jeffrey A.; Ciftcioglu, Neva; Schmid, Joseph; Griffith, Donald

    2007-01-01

    Spaceflight-induced microgravity appears to be a risk factor for the development of urinary calculi due to skeletal calcium liberation and other undefined factors, resulting in stone disease in crewmembers during and after spaceflight. Calcifying nanoparticles, or nanobacteria, reproduce at a more rapid rate in simulated microgravity conditions and create external shells of calcium phosphate in the form of apatite. The questions arises whether calcifying nanoparticles are niduses for calculi and contribute to the development of clinical stone disease in humans, who possess environmental factors predisposing to the development of urinary calculi and potentially impaired immunological defenses during spaceflight. A case of a urinary calculus passed from an astronaut post-flight with morphological characteristics of calcifying nanoparticles and staining positive for a calcifying nanoparticle unique antigen, is presented.

  2. Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells.

    PubMed

    Ke, Weijun; Xiao, Chuanxiao; Wang, Changlei; Saparov, Bayrammurad; Duan, Hsin-Sheng; Zhao, Dewei; Xiao, Zewen; Schulz, Philip; Harvey, Steven P; Liao, Weiqiang; Meng, Weiwei; Yu, Yue; Cimaroli, Alexander J; Jiang, Chun-Sheng; Zhu, Kai; Al-Jassim, Mowafak; Fang, Guojia; Mitzi, David B; Yan, Yanfa

    2016-07-01

    Lead thiocyanate in the perovskite precursor can increase the grain size of a perovskite thin film and reduce the conductivity of the grain boundaries, leading to perovskite solar cells with reduced hysteresis and enhanced fill factor. A planar perovskite solar cell with grain boundary and interface passivation achieves a steady-state efficiency of 18.42%.

  3. The association of glutathione S-transferase gene mutations (including GSTT1 and GSTM1) with the prognostic factors and relapse in acute lymphoblastic leukemia.

    PubMed

    Zareifar, Soheila; Monabati, Ahmad; Saeed, Amir; Fakhraee, Farzaneh; Cohan, Nader

    2013-09-01

    Acute lymphoblastic leukemia (ALL) is the most common malignancy in children. It accounts for one fourth of all childhood cancers and approximately 75% of all childhood leukemias. Some prognostic factors determine the outcome of therapy [e.g. age, sex, initial white blood cell count (WBC), etc.]; however, it is believed that other mechanisms such as glutathione S-transferase (GST) gene mutation, the expression of lung resistance protein (LRP), and multidrug resistance-associated protein (MRP) also plays a role in treatment failure. In this study, GST gene mutations including GSTM1 and GSTT1 were evaluated in patients with leukemia. Thirty newly diagnosed ALL patients younger than 15 years of age participated in the present study. Bone marrow aspiration and biopsy were evaluated for immune phenotyping and DNA was extracted for GST genotyping. All data plus sex, age, initial WBC count, central nervous system (CNS) or testicular involvement, immune phenotype, and outcome (relapse or not) were analyzed statistically. Genotyping showed that 46% were double null, 50% were M1 null and 93.3% were T1 null for GST mutations. There was no statistically significant relationship between GSTT1 and GSTM1 mutations, or between double null status, prognostic factors and relapse (P > .05). So, although the results of GST mutations were consistent, it seems that these mutations are not statistically significant. PMID:23444902

  4. Factors affecting the microbial and chemical composition of silage. III. Effect of urea additions on maize silage.

    PubMed

    Mahmoud, S A; Abd-el-Hafez, A; Zaki, M M; Saleh, E A

    1978-01-01

    The effect of urea additions on the microbiological and chemical properties of silage, produced from young maize plants (Darawa stage), was studied. Urea treatments, i.e., 0.25%, 0.50%, 0.75%, and 1.00%, stimulated higher densities of the desired microorganisms than the control, while undesired organisms showed lower counts (proteolytic and saccharolytic anaerobes). Addition of 0.25 to 0.50% or urea resulted in the production of high quality silage with pleasant small and high nutritive value, as confirmed by the various microbiological and chemical analyses conducted. Higher levels (0.75 and 1.00%) of urea decreased the quality of the product. PMID:29417

  5. c-Fos: an AP-1 transcription factor with an additional cytoplasmic, non-genomic lipid synthesis activation capacity.

    PubMed

    Caputto, Beatriz L; Cardozo Gizzi, Andrés M; Gil, Germán A

    2014-09-01

    The mechanisms that co-ordinately activate lipid synthesis when high rates of membrane biogenesis are needed to support cell growth are largely unknown. c-Fos, a well known AP-1 transcription factor, has emerged as a unique protein with the capacity to associate to specific enzymes of the pathway of synthesis of phospholipids at the endoplasmic reticulum and activate their synthesis to accompany genomic decisions of growth. Herein, we discuss this cytoplasmic, non-genomic effect of c-Fos in the context of other mechanisms that have been proposed to regulate lipid synthesis.

  6. Methods for rearing Mesostoma ehrenbergii in the laboratory for cell biology experiments, including identification of factors that influence production of different egg types.

    PubMed

    Hoang, Carina; Ferraro-Gideon, Jessica; Gauthier, Kimberley; Forer, Arthur

    2013-10-01

    Mesostoma ehrenbergii spermatocytes are uniquely useful to study various aspects of cell division. Their chromosomes are large in size and few in number, with only three bivalent and four univalent chromosomes. During prometaphase, bipolar bivalents oscillate regularly to and from the poles for 1-2 hours. The univalents remain at the poles but occasionally move from one pole to the other. In addition, a precocious cleavage furrow forms during prometaphase and remains partially constricted until anaphase. Attempts to rear these animals indefinitely in laboratory conditions, however, have been mostly unsuccessful because of their reproductive strategy. M. ehrenbergii are hermaphroditic flatworms that can produce viviparous offspring (termed S eggs) and/or diapausing eggs (termed D eggs) and they follow either one of two reproductive patterns: (1) they first form S eggs and following the delivery of these eggs produce D eggs, or (2) they only produce D eggs. When only D eggs are formed, which is common under laboratory conditions, the stocks die out until the D eggs hatch, which is irregular and creates unpredictable wait times. Consequently, in order to maintain M. ehrenbergii stocks to study their spermatocytes, we examined various factors that might influence egg-type production. Feeding them daily and keeping them at 25°C favours S egg production. Currently, our cultures have reached the 53rd generation. We herein describe our rearing and dissection methods, and some experiments which led to our present rearing methods. PMID:23686667

  7. Diethylnitrosamine-induced expression of germline-specific genes and pluripotency factors, including vasa and oct4, in medaka somatic cells.

    PubMed

    Shen, Jialing; Yokota, Shinpei; Yokoi, Hayato; Suzuki, Tohru

    2016-09-16

    Various methods have been developed to reprogram mammalian somatic cells into pluripotent cells as well as to directly reprogram somatic cells into other cell lineages. We are interested in applying these methods to fish, and here, we examined whether mRNA expression of germline-specific genes (vasa, nanos2, -3) and pluripotency factors (oct4, sox2, c-myc, nanog) is inducible in somatic cells of Japanese medaka (Oryzias latipes). We found that the expression of vasa is induced in the gut and regenerating fin by exposure to a carcinogen, diethylnitrosamine (DEN). Induction of vasa in the gut started on the 5th day of treatment with >50 ppm DEN. In addition, nanos2, -3, oct4, sox2, klf4, c-myc, and nanog were also expressed simultaneously in some vasa-positive gut and regenerating fin samples. Vasa-positive cells were detected by immunohistochemistry (IHC) in the muscle surrounding the gut and in the wound epidermis, blastema, and fibroblast-like cells in regenerating fin. In vasa:GFP transgenic medaka, green fluorescent protein (GFP) fluorescence appeared in the wound epidermis and fibroblast-like cells in the regenerating fin following DEN exposure, in agreement with the IHC data. Our data show that mRNA expression of genes relevant to germ cell specification and pluripotency can be induced in fish somatic cells by exposure to DEN, suggesting the possibility of efficient and rapid cell reprogramming of fish somatic cells. PMID:27514449

  8. Methods for rearing Mesostoma ehrenbergii in the laboratory for cell biology experiments, including identification of factors that influence production of different egg types.

    PubMed

    Hoang, Carina; Ferraro-Gideon, Jessica; Gauthier, Kimberley; Forer, Arthur

    2013-10-01

    Mesostoma ehrenbergii spermatocytes are uniquely useful to study various aspects of cell division. Their chromosomes are large in size and few in number, with only three bivalent and four univalent chromosomes. During prometaphase, bipolar bivalents oscillate regularly to and from the poles for 1-2 hours. The univalents remain at the poles but occasionally move from one pole to the other. In addition, a precocious cleavage furrow forms during prometaphase and remains partially constricted until anaphase. Attempts to rear these animals indefinitely in laboratory conditions, however, have been mostly unsuccessful because of their reproductive strategy. M. ehrenbergii are hermaphroditic flatworms that can produce viviparous offspring (termed S eggs) and/or diapausing eggs (termed D eggs) and they follow either one of two reproductive patterns: (1) they first form S eggs and following the delivery of these eggs produce D eggs, or (2) they only produce D eggs. When only D eggs are formed, which is common under laboratory conditions, the stocks die out until the D eggs hatch, which is irregular and creates unpredictable wait times. Consequently, in order to maintain M. ehrenbergii stocks to study their spermatocytes, we examined various factors that might influence egg-type production. Feeding them daily and keeping them at 25°C favours S egg production. Currently, our cultures have reached the 53rd generation. We herein describe our rearing and dissection methods, and some experiments which led to our present rearing methods.

  9. 42 CFR 136.408 - What are other factors, in addition to the minimum standards of character, that may be considered...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false What are other factors, in addition to the minimum standards of character, that may be considered in determining placement of an individual in a position that involves regular contact with or control over Indian children? 136.408 Section 136.408 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT...

  10. 42 CFR 136.408 - What are other factors, in addition to the minimum standards of character, that may be considered...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false What are other factors, in addition to the minimum standards of character, that may be considered in determining placement of an individual in a position that involves regular contact with or control over Indian children? 136.408 Section 136.408 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT...

  11. Ameliorative effects of telmisartan on the inflammatory response and impaired spatial memory in a rat model of Alzheimer's disease incorporating additional cerebrovascular disease factors.

    PubMed

    Shindo, Taro; Takasaki, Kotaro; Uchida, Kanako; Onimura, Rika; Kubota, Kaori; Uchida, Naoki; Irie, Keiichi; Katsurabayashi, Shutaro; Mishima, Kenichi; Nishimura, Ryoji; Fujiwara, Michihiro; Iwasaki, Katsunori

    2012-01-01

    Telmisartan, an angiotensin type 1 receptor blocker, is used in the management of hypertension to control blood pressure. In addition, telmisartan has a partial agonistic effect on peroxisome proliferator activated receptor γ (PPARγ). Recently, the effects of telmisartan on spatial memory or the inflammatory response were monitored in a mouse model of Alzheimer's disease (AD). However, to date, no studies have investigated the ameliorative effects of telmisartan on impaired spatial memory and the inflammatory response in an AD animal model incorporating additional cerebrovascular disease factors. In this study, we examined the effect of telmisartan on spatial memory impairment and the inflammatory response in a rat model of AD incorporating additional cerebrovascular disease factors. Rats were subjected to cerebral ischemia and an intracerebroventricular injection of oligomeric or aggregated amyloid-β (Aβ). Oral administration of telmisartan (0.3, 1, 3 mg/kg/d) seven days after ischemia and Aβ treatment resulted in better performance in the eight arm radial maze task in a dose-dependent manner. Telmisartan also reduced tumor necrosis factor α mRNA expression in the hippocampal region of rats with impaired spatial memory. These effects of telmisartan were antagonized by GW9662, an antagonist of PPARγ. These results suggest that telmisartan has ameliorative effects on the impairment of spatial memory in a rat model of AD incorporating additional cerebrovascular disease factors via its anti-inflammatory effect.

  12. Breeding site selection by coho salmon (Oncorhynchus kisutch) in relation to large wood additions and factors that influence reproductive success

    USGS Publications Warehouse

    Clark, Steven M.; Dunham, Jason B.; McEnroe, Jeffery R.; Lightcap, Scott W.

    2014-01-01

    The fitness of female Pacific salmon (Oncorhynchus spp.) with respect to breeding behavior can be partitioned into at least four fitness components: survival to reproduction, competition for breeding sites, success of egg incubation, and suitability of the local environment near breeding sites for early rearing of juveniles. We evaluated the relative influences of habitat features linked to these fitness components with respect to selection of breeding sites by coho salmon (Oncorhynchus kisutch). We also evaluated associations between breeding site selection and additions of large wood, as the latter were introduced into the study system as a means of restoring habitat conditions to benefit coho salmon. We used a model selection approach to organize specific habitat features into groupings reflecting fitness components and influences of large wood. Results of this work suggest that female coho salmon likely select breeding sites based on a wide range of habitat features linked to all four hypothesized fitness components. More specifically, model parameter estimates indicated that breeding site selection was most strongly influenced by proximity to pool-tail crests and deeper water (mean and maximum depths). Linkages between large wood and breeding site selection were less clear. Overall, our findings suggest that breeding site selection by coho salmon is influenced by a suite of fitness components in addition to the egg incubation environment, which has been the emphasis of much work in the past.

  13. Structural basis for the requirement of additional factors for MLL1 SET domain activity and recognition of epigenetic marks.

    PubMed

    Southall, Stacey M; Wong, Poon-Sheng; Odho, Zain; Roe, S Mark; Wilson, Jon R

    2009-01-30

    The mixed-lineage leukemia protein MLL1 is a transcriptional regulator with an essential role in early development and hematopoiesis. The biological function of MLL1 is mediated by the histone H3K4 methyltransferase activity of the carboxyl-terminal SET domain. We have determined the crystal structure of the MLL1 SET domain in complex with cofactor product AdoHcy and a histone H3 peptide. This structure indicates that, in order to form a well-ordered active site, a highly variable but essential component of the SET domain must be repositioned. To test this idea, we compared the effect of the addition of MLL complex members on methyltransferase activity and show that both RbBP5 and Ash2L but not Wdr5 stimulate activity. Additionally, we have determined the effect of posttranslational modifications on histone H3 residues downstream and upstream from the target lysine and provide a structural explanation for why H3T3 phosphorylation and H3K9 acetylation regulate activity. PMID:19187761

  14. Epidermal growth factor (EGF)-receptor is phosphorylated at threonine-654 in A431 cells following EGF addition

    SciTech Connect

    Whiteley, B.; Glaser, L.

    1986-05-01

    It has been shown that activation of protein kinase C by tumor-promoting phorbol diesters causes phorphorylation of the EGF-receptor at threonine-654 and is believed to thereby regulate the EGF receptor tyrosine kinase and EGF binding activity. In their present studies, /sup 32/P-labeled A431 cells were treated with and without 10 nM phorbol 12-myristate 13-acetate (PMA), or with 200 ng/ml EGF. Analysis of /sup 32/P-labeled EGF receptor tryptic phosphopeptides by reverse-phase HPLC confirmed the known effects of PMA and revealed that EGF caused phosphorylation at threonine-654 as well as various tyrosine residues. This effect occurred as early as 1 minute after EGF addition and was maximal after 5 minutes. The magnitude of the response appears to be 50% of a 15 minute treatment with 10 nM PMA. Direct measurement of diacylglycerol using an E. coli diacylglycerol kinase confirmed that EGF-stimulated phosphoinositide turnover could cause very rapid activation of protein kinase C. These results imply that protein kinase C is playing a role in negative modulation of EGF-receptor activity following EGF addition to A431 cells.

  15. The TAL effector PthA4 interacts with nuclear factors involved in RNA-dependent processes including a HMG protein that selectively binds poly(U) RNA.

    PubMed

    de Souza, Tiago Antonio; Soprano, Adriana Santos; de Lira, Nayara Patricia Vieira; Quaresma, Alexandre José Christino; Pauletti, Bianca Alves; Paes Leme, Adriana Franco; Benedetti, Celso Eduardo

    2012-01-01

    Plant pathogenic bacteria utilize an array of effector proteins to cause disease. Among them, transcriptional activator-like (TAL) effectors are unusual in the sense that they modulate transcription in the host. Although target genes and DNA specificity of TAL effectors have been elucidated, how TAL proteins control host transcription is poorly understood. Previously, we showed that the Xanthomonas citri TAL effectors, PthAs 2 and 3, preferentially targeted a citrus protein complex associated with transcription control and DNA repair. To extend our knowledge on the mode of action of PthAs, we have identified new protein targets of the PthA4 variant, required to elicit canker on citrus. Here we show that all the PthA4-interacting proteins are DNA and/or RNA-binding factors implicated in chromatin remodeling and repair, gene regulation and mRNA stabilization/modification. The majority of these proteins, including a structural maintenance of chromosomes protein (CsSMC), a translin-associated factor X (CsTRAX), a VirE2-interacting protein (CsVIP2), a high mobility group (CsHMG) and two poly(A)-binding proteins (CsPABP1 and 2), interacted with each other, suggesting that they assemble into a multiprotein complex. CsHMG was shown to bind DNA and to interact with the invariable leucine-rich repeat region of PthAs. Surprisingly, both CsHMG and PthA4 interacted with PABP1 and 2 and showed selective binding to poly(U) RNA, a property that is novel among HMGs and TAL effectors. Given that homologs of CsHMG, CsPABP1, CsPABP2, CsSMC and CsTRAX in other organisms assemble into protein complexes to regulate mRNA stability and translation, we suggest a novel role of TAL effectors in mRNA processing and translational control.

  16. Incidence, risk factors, and implemented prophylaxis of varicella zoster virus infection, including complicated varicella zoster virus and herpes simplex virus infections, in lenalidomide-treated multiple myeloma patients.

    PubMed

    König, C; Kleber, M; Reinhardt, H; Knop, S; Wäsch, R; Engelhardt, M

    2014-03-01

    In the era of high-dose chemotherapy and novel antimyeloma agents, the survival of multiple myeloma (MM) patients has substantially improved. Adverse effects, including infections, may however arise in the era of combination antimyeloma therapies. In general, MM patients have shown a risk of varicella zoster virus (VZV) infection of 1-4 %, increasing with bortezomib treatment or transplants, but whether immunomodulatory drugs also bear a risk of VZV/complicated herpes simplex virus (HSV) (e.g., VZV-encephalitis [VZV-E], disseminated VZV-infection [d-VZV-i], or conus-cauda syndrome [CCS]) has not been elucidated. We here assessed VZV, VZV-E, d-VZV-i, and CCS in 93 lenalidomide-treated MM patients, consecutively seen and treated in our department. Patients' data were analyzed via electronic medical record retrieval within our research data warehouse as described previously. Of the 93 MM patients receiving lenalidomide, 10 showed VZV or other complicated VZV/HSV infections. These VZV patients showed defined risk factors as meticulously assessed, including suppressed lymphocyte subsets, substantial cell-mediated immune defects, and compromised humoral immune response. Due to our findings-and in line with an aciclovir prophylaxis in bortezomib and stem cell transplant protocols-we introduced a routine aciclovir prophylaxis in our lenalidomide protocols in May 2012 to minimize adverse events and to avoid discontinuation of lenalidomide treatment. Since then, we have observed no case of VZV/complicated HSV infection. Based on our data, we encourage other centers to also focus on these observations, assess viral infections, and-in those centers facilitating a research data warehouse-advocate an analogue data review as an appropriate multicenter approach.

  17. Measurement of toverline{t} production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √{s} = 8 {TeV}

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; de Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; van de Klundert, M.; van Haevermaet, H.; van Mechelen, P.; van Remortel, N.; van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; de Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; van Doninck, W.; van Mulders, P.; van Onsem, G. P.; van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; de Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-Conde, A.; Reis, T.; Seva, T.; Vander Velde, C.; Yonamine, R.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Adler, V.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; McCartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Strobbe, N.; Tytgat, M.; van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Júnior, W. L. Aldá; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; da Costa, E. M.; de Jesus Damiao, D.; de Oliveira Martins, C.; Fonseca de Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; de Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; El Sawy, M.; El-Khateeb, E.; Elkafrawy, T.; Mohamed, A.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.; Merlin, J. A.; Skovpen, K.; van Hove, P.; Gadrat, S.; Beauceron, S.; Bernet, C.; Boudoul, G.; Bouvier, E.; Carrillo Montoya, C. A.; Chierici, R.; Contardo, D.; Courbon, B.; Depasse, P.; El Mamouni, H.; Fan, J.; Fay, J.; Gascon, S.; Gouzevitch, M.; Ille, B.; Lagarde, F.; Laktineh, I. B.; Lethuillier, M.; Mirabito, L.; Pequegnot, A. L.; Perries, S.; Ruiz Alvarez, J. D.; Sabes, D.; Sgandurra, L.; Sordini, V.; Vander Donckt, M.; Verdier, P.; Viret, S.; Toriashvili, T.; Lomidze, D.; Autermann, C.; Beranek, S.; Edelhoff, M.; Feld, L.; Heister, A.; Kiesel, M. K.; Klein, K.; Lipinski, M.; Ostapchuk, A.; Preuten, M.; Raupach, F.; Schael, S.; Schulte, J. F.; Verlage, T.; Weber, H.; Wittmer, B.; Zhukov, V.; Ata, M.; Brodski, M.; Dietz-Laursonn, E.; Duchardt, D.; Endres, M.; Erdmann, M.; Erdweg, S.; Esch, T.; Fischer, R.; Güth, A.; Hebbeker, T.; Heidemann, C.; Hoepfner, K.; Klingebiel, D.; Knutzen, S.; Kreuzer, P.; Merschmeyer, M.; Meyer, A.; Millet, P.; Olschewski, M.; Padeken, K.; Papacz, P.; Pook, T.; Radziej, M.; Reithler, H.; Rieger, M.; Scheuch, F.; Sonnenschein, L.; Teyssier, D.; Thüer, S.; Cherepanov, V.; Erdogan, Y.; Flügge, G.; Geenen, H.; Geisler, M.; Hoehle, F.; Kargoll, B.; Kress, T.; Kuessel, Y.; Künsken, A.; Lingemann, J.; Nehrkorn, A.; Nowack, A.; Nugent, I. M.; Pistone, C.; Pooth, O.; Stahl, A.; Aldaya Martin, M.; Asin, I.; Bartosik, N.; Behnke, O.; Behrens, U.; Bell, A. J.; Borras, K.; Burgmeier, A.; Campbell, A.; Choudhury, S.; Costanza, F.; Diez Pardos, C.; Dolinska, G.; Dooling, S.; Dorland, T.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Flucke, G.; Gallo, E.; Garcia, J. Garay; Geiser, A.; Gizhko, A.; Gunnellini, P.; Hauk, J.; Hempel, M.; Jung, H.; Kalogeropoulos, A.; Karacheban, O.; Kasemann, M.; Katsas, P.; Kieseler, J.; Kleinwort, C.; Korol, I.; Lange, W.; Leonard, J.; Lipka, K.; Lobanov, A.; Lohmann, W.; Mankel, R.; Marfin, I.; Melzer-Pellmann, I.-A.; Meyer, A. B.; Mittag, G.; Mnich, J.; Mussgiller, A.; Naumann-Emme, S.; Nayak, A.; Ntomari, E.; Perrey, H.; Pitzl, D.; Placakyte, R.; Raspereza, A.; Roland, B.; Sahin, M. Ö.; Saxena, P.; Schoerner-Sadenius, T.; Schröder, M.; Seitz, C.; Spannagel, S.; Trippkewitz, K. D.; Walsh, R.; Wissing, C.; Blobel, V.; Centis Vignali, M.; Draeger, A. R.; Erfle, J.; Garutti, E.; Goebel, K.; Gonzalez, D.; Görner, M.; Haller, J.; Hoffmann, M.; Höing, R. S.; Junkes, A.; Klanner, R.; Kogler, R.; Lapsien, T.; Lenz, T.; Marchesini, I.; Marconi, D.; Meyer, M.; Nowatschin, D.; Ott, J.; Pantaleo, F.; Peiffer, T.; Perieanu, A.; Pietsch, N.; Poehlsen, J.; Rathjens, D.; Sander, C.; Schettler, H.; Schleper, P.; Schlieckau, E.; Schmidt, A.; Schwandt, J.; Sola, V.; Stadie, H.; Steinbrück, G.; Tholen, H.; Troendle, D.; Usai, E.; Vanelderen, L.; Vanhoefer, A.; Vormwald, B.; Akbiyik, M.; Barth, C.; Baus, C.; Berger, J.; Böser, C.; Butz, E.; Chwalek, T.; Colombo, F.; de Boer, W.; Descroix, A.; Dierlamm, A.; Fink, S.; Frensch, F.; Friese, R.; Giffels, M.; Gilbert, A.; Haitz, D.; Hartmann, F.; Heindl, S. M.; Husemann, U.; Katkov, I.; Kornmayer, A.; Lobelle Pardo, P.; Maier, B.; Mildner, H.; Mozer, M. U.; Müller, T.; Müller, Th.; Plagge, M.; Quast, G.; Rabbertz, K.; Röcker, S.; Roscher, F.; Sieber, G.; Simonis, H. J.; Stober, F. M.; Ulrich, R.; Wagner-Kuhr, J.; Wayand, S.; Weber, M.; Weiler, T.; Wöhrmann, C.; Wolf, R.; Anagnostou, G.; Daskalakis, G.; Geralis, T.; Giakoumopoulou, V. A.; Kyriakis, A.; Loukas, D.; Psallidas, A.; Topsis-Giotis, I.; Agapitos, A.; Kesisoglou, S.; Panagiotou, A.; Saoulidou, N.; Tziaferi, E.; Evangelou, I.; Flouris, G.; Foudas, C.; Kokkas, P.; Loukas, N.; Manthos, N.; Papadopoulos, I.; Paradas, E.; Strologas, J.; Bencze, G.; Hajdu, C.; Hazi, A.; Hidas, P.; Horvath, D.; Sikler, F.; Veszpremi, V.; Vesztergombi, G.; Zsigmond, A. J.; Beni, N.; Czellar, S.; Karancsi, J.; Molnar, J.; Szillasi, Z.; Bartók, M.; Makovec, A.; Raics, P.; Trocsanyi, Z. L.; Ujvari, B.; Mal, P.; Mandal, K.; Sahoo, D. K.; Sahoo, N.; Swain, S. K.; Bansal, S.; Beri, S. B.; Bhatnagar, V.; Chawla, R.; Gupta, R.; Bhawandeep, U.; Kalsi, A. K.; Kaur, A.; Kaur, M.; Kumar, R.; Mehta, A.; Mittal, M.; Singh, J. B.; Walia, G.; Kumar, Ashok; Bhardwaj, A.; Choudhary, B. C.; Garg, R. B.; Kumar, A.; Malhotra, S.; Naimuddin, M.; Nishu, N.; Ranjan, K.; Sharma, R.; Sharma, V.; Bhattacharya, S.; Chatterjee, K.; Dey, S.; Dutta, S.; Jain, Sa.; Majumdar, N.; Modak, A.; Mondal, K.; Mukherjee, S.; Mukhopadhyay, S.; Roy, A.; Roy, D.; Roy Chowdhury, S.; Sarkar, S.; Sharan, M.; Abdulsalam, A.; Chudasama, R.; Dutta, D.; Jha, V.; Kumar, V.; Mohanty, A. K.; Pant, L. M.; Shukla, P.; Topkar, A.; Aziz, T.; Banerjee, S.; Bhowmik, S.; Chatterjee, R. M.; Dewanjee, R. K.; Dugad, S.; Ganguly, S.; Ghosh, S.; Guchait, M.; Gurtu, A.; Kole, G.; Kumar, S.; Mahakud, B.; Maity, M.; Majumder, G.; Mazumdar, K.; Mitra, S.; Mohanty, G. B.; Parida, B.; Sarkar, T.; Sur, N.; Sutar, B.; Wickramage, N.; Chauhan, S.; Dube, S.; Sharma, S.; Bakhshiansohi, H.; Behnamian, H.; Etesami, S. M.; Fahim, A.; Goldouzian, R.; Khakzad, M.; Mohammadi Najafabadi, M.; Naseri, M.; Paktinat Mehdiabadi, S.; Rezaei Hosseinabadi, F.; Safarzadeh, B.; Zeinali, M.; Felcini, M.; Grunewald, M.; Abbrescia, M.; Calabria, C.; Caputo, C.; Colaleo, A.; Creanza, D.; Cristella, L.; de Filippis, N.; de Palma, M.; Fiore, L.; Iaselli, G.; Maggi, G.; Miniello, G.; Maggi, M.; My, S.; Nuzzo, S.; Pompili, A.; Pugliese, G.; Radogna, R.; Ranieri, A.; Selvaggi, G.; Silvestris, L.; Venditti, R.; Verwilligen, P.; Abbiendi, G.; Battilana, C.; Benvenuti, A. C.; Bonacorsi, D.; Braibant-Giacomelli, S.; Brigliadori, L.; Campanini, R.; Capiluppi, P.; Castro, A.; Cavallo, F. R.; Chhibra, S. S.; Codispoti, G.; Cuffiani, M.; Dallavalle, G. M.; Fabbri, F.; Fanfani, A.; Fasanella, D.; Giacomelli, P.; Grandi, C.; Guiducci, L.; Marcellini, S.; Masetti, G.; Montanari, A.; Navarria, F. L.; Perrotta, A.; Rossi, A. M.; Primavera, F.; Rovelli, T.; Siroli, G. P.; Tosi, N.; Travaglini, R.; Cappello, G.; Chiorboli, M.; Costa, S.; di Mattia, A.; Giordano, F.; Potenza, R.; Tricomi, A.; Tuve, C.; Barbagli, G.; Ciulli, V.; Civinini, C.; D'Alessandro, R.; Focardi, E.; Gonzi, S.; Gori, V.; Lenzi, P.; Meschini, M.; Paoletti, S.; Sguazzoni, G.; Tropiano, A.; Viliani, L.; Benussi, L.; Bianco, S.; Fabbri, F.; Piccolo, D.; Primavera, F.; Calvelli, V.; Ferro, F.; Lo Vetere, M.; Monge, M. R.; Robutti, E.; Tosi, S.; Brianza, L.; Dinardo, M. E.; Fiorendi, S.; Gennai, S.; Gerosa, R.; Ghezzi, A.; Govoni, P.; Malvezzi, S.; Manzoni, R. A.; Marzocchi, B.; Menasce, D.; Moroni, L.; Paganoni, M.; Pedrini, D.; Ragazzi, S.; Redaelli, N.; Tabarelli de Fatis, T.; Buontempo, S.; Cavallo, N.; di Guida, S.; Esposito, M.; Fabozzi, F.; Iorio, A. O. M.; Lanza, G.; Lista, L.; Meola, S.; Merola, M.; Paolucci, P.; Sciacca, C.; Thyssen, F.; Azzi, P.; Bacchetta, N.; Bellato, M.; Benato, L.; Bisello, D.; Boletti, A.; Carlin, R.; Checchia, P.; Dall'Osso, M.; Dorigo, T.; Dosselli, U.; Fanzago, F.; Gasparini, F.; Gasparini, U.; Gonella, F.; Gozzelino, A.; Lacaprara, S.; Margoni, M.; Meneguzzo, A. T.; Pazzini, J.; Pozzobon, N.; Ronchese, P.; Simonetto, F.; Torassa, E.; Tosi, M.; Zanetti, M.; Zotto, P.; Zucchetta, A.; Zumerle, G.; Braghieri, A.; Magnani, A.; Montagna, P.; Ratti, S. P.; Re, V.; Riccardi, C.; Salvini, P.; Vai, I.; Vitulo, P.; Alunni Solestizi, L.; Biasini, M.; Bilei, G. M.; Ciangottini, D.; Fanò, L.; Lariccia, P.; Mantovani, G.; Menichelli, M.; Saha, A.; Santocchia, A.; Androsov, K.; Azzurri, P.; Bagliesi, G.; Bernardini, J.; Boccali, T.; Castaldi, R.; Ciocci, M. A.; Dell'Orso, R.; Donato, S.; Fedi, G.; Fiori, F.; Foà, L.; Giassi, A.; Grippo, M. T.; Ligabue, F.; Lomtadze, T.; Martini, L.; Messineo, A.; Palla, F.; Rizzi, A.; Savoy-Navarro, A.; Serban, A. T.; Spagnolo, P.; Tenchini, R.; Tonelli, G.; Venturi, A.; Verdini, P. G.; Barone, L.; Cavallari, F.; D'Imperio, G.; Del Re, D.; Diemoz, M.; Gelli, S.; Jorda, C.; Longo, E.; Margaroli, F.; Meridiani, P.; Organtini, G.; Paramatti, R.; Preiato, F.; Rahatlou, S.; Rovelli, C.; Santanastasio, F.; Traczyk, P.; Amapane, N.; Arcidiacono, R.; Argiro, S.; Arneodo, M.; Bellan, R.; Biino, C.; Cartiglia, N.; Costa, M.; Covarelli, R.; Degano, A.; Demaria, N.; Finco, L.; Kiani, B.; Mariotti, C.; Maselli, S.; Migliore, E.; Monaco, V.; Monteil, E.; Obertino, M. M.; Pacher, L.; Pastrone, N.; Pelliccioni, M.; Pinna Angioni, G. L.; Ravera, F.; Potenza, A.; Romero, A.; Ruspa, M.; Sacchi, R.; Solano, A.; Staiano, A.; Tamponi, U.; Belforte, S.; Candelise, V.; Casarsa, M.; Cossutti, F.; Della Ricca, G.; Gobbo, B.; La Licata, C.; Marone, M.; Schizzi, A.; Zanetti, A.; Kropivnitskaya, T. A.; Nam, S. K.; Kim, D. H.; Kim, G. N.; Kim, M. S.; Kim, M. S.; Kong, D. J.; Lee, S.; Oh, Y. D.; Sakharov, A.; Son, D. C.; Brochero Cifuentes, J. A.; Kim, H.; Kim, T. J.; Song, S.; Choi, S.; Go, Y.; Gyun, D.; Hong, B.; Jo, M.; Kim, H.; Kim, Y.; Lee, B.; Lee, K.; Lee, K. S.; Lee, S.; Lee, S.; Park, S. K.; Roh, Y.; Yoo, H. D.; Choi, M.; Kim, H.; Kim, J. H.; Lee, J. S. H.; Park, I. C.; Ryu, G.; Ryu, M. S.; Choi, Y.; Goh, J.; Kim, D.; Kwon, E.; Lee, J.; Yu, I.; Juodagalvis, A.; Vaitkus, J.; Ahmed, I.; Ibrahim, Z. A.; Komaragiri, J. R.; Md Ali, M. A. B.; Mohamad Idris, F.; Wan Abdullah, W. A. T.; Yusli, M. N.; Wan Abdullah, W. A. T.; Casimiro Linares, E.; Castilla-Valdez, H.; de La Cruz-Burelo, E.; Heredia-de La Cruz, I.; Hernandez-Almada, A.; Lopez-Fernandez, R.; Sanchez-Hernandez, A.; Carrillo Moreno, S.; Vazquez Valencia, F.; Pedraza, I.; Salazar Ibarguen, H. A.; Morelos Pineda, A.; Krofcheck, D.; Butler, P. H.; Ahmad, A.; Ahmad, M.; Hassan, Q.; Hoorani, H. R.; Khan, W. A.; Khurshid, T.; Shoaib, M.; Bialkowska, H.; Bluj, M.; Boimska, B.; Frueboes, T.; Górski, M.; Kazana, M.; Nawrocki, K.; Romanowska-Rybinska, K.; Szleper, M.; Zalewski, P.; Brona, G.; Bunkowski, K.; Byszuk, A.; Doroba, K.; Kalinowski, A.; Konecki, M.; Krolikowski, J.; Misiura, M.; Olszewski, M.; Walczak, M.; Bargassa, P.; da Cruz E Silva, C. Beir Ao; di Francesco, A.; Faccioli, P.; Parracho, P. G. Ferreira; Gallinaro, M.; Leonardo, N.; Lloret Iglesias, L.; Nguyen, F.; Rodrigues Antunes, J.; Seixas, J.; Toldaiev, O.; Vadruccio, D.; Varela, J.; Vischia, P.; Afanasiev, S.; Bunin, P.; Gavrilenko, M.; Golutvin, I.; Gorbunov, I.; Kamenev, A.; Karjavin, V.; Konoplyanikov, V.; Lanev, A.; Malakhov, A.; Matveev, V.; Moisenz, P.; Palichik, V.; Perelygin, V.; Savina, M.; Shmatov, S.; Shulha, S.; Smirnov, V.; Zarubin, A.; Golovtsov, V.; Ivanov, Y.; Kim, V.; Kuznetsova, E.; Levchenko, P.; Murzin, V.; Oreshkin, V.; Smirnov, I.; Sulimov, V.; Uvarov, L.; Vavilov, S.; Vorobyev, A.; Andreev, Yu.; Dermenev, A.; Gninenko, S.; Golubev, N.; Karneyeu, A.; Kirsanov, M.; Krasnikov, N.; Pashenkov, A.; Tlisov, D.; Toropin, A.; Epshteyn, V.; Gavrilov, V.; Lychkovskaya, N.; Popov, V.; Pozdnyakov, L.; Safronov, G.; Spiridonov, A.; Vlasov, E.; Zhokin, A.; Bylinkin, A.; Andreev, V.; Azarkin, M.; Dremin, I.; Kirakosyan, M.; Leonidov, A.; Mesyats, G.; Rusakov, S. V.; Baskakov, A.; Belyaev, A.; Boos, E.; Bunichev, V.; Dubinin, M.; Dudko, L.; Klyukhin, V.; Kodolova, O.; Korneeva, N.; Lokhtin, I.; Myagkov, I.; Obraztsov, S.; Perfilov, M.; Petrushanko, S.; Savrin, V.; Azhgirey, I.; Bayshev, I.; Bitioukov, S.; Kachanov, V.; Kalinin, A.; Konstantinov, D.; Krychkine, V.; Petrov, V.; Ryutin, R.; Sobol, A.; Tourtchanovitch, L.; Troshin, S.; Tyurin, N.; Uzunian, A.; Volkov, A.; Adzic, P.; Milosevic, J.; Rekovic, V.; Alcaraz Maestre, J.; Battilana, C.; Calvo, E.; Cerrada, M.; Chamizo Llatas, M.; Colino, N.; de La Cruz, B.; Delgado Peris, A.; Domínguez Vázquez, D.; Escalante Del Valle, A.; Fernandez Bedoya, C.; Ramos, J. P. Fernández; Flix, J.; Fouz, M. C.; Garcia-Abia, P.; Gonzalez Lopez, O.; Goy Lopez, S.; Hernandez, J. M.; Josa, M. I.; Navarro de Martino, E.; Yzquierdo, A. Pérez-Calero; Puerta Pelayo, J.; Quintario Olmeda, A.; Redondo, I.; Romero, L.; Santaolalla, J.; Soares, M. S.; Albajar, C.; de Trocóniz, J. F.; Missiroli, M.; Moran, D.; Cuevas, J.; Fernandez Menendez, J.; Folgueras, S.; Gonzalez Caballero, I.; Palencia Cortezon, E.; Vizan Garcia, J. M.; Cabrillo, I. J.; Calderon, A.; Castiñeiras de Saa, J. R.; de Castro Manzano, P.; Duarte Campderros, J.; Fernandez, M.; Garcia-Ferrero, J.; Gomez, G.; Lopez Virto, A.; Marco, J.; Marco, R.; Martinez Rivero, C.; Matorras, F.; Munoz Sanchez, F. J.; Piedra Gomez, J.; Rodrigo, T.; Rodríguez-Marrero, A. Y.; Ruiz-Jimeno, A.; Scodellaro, L.; Trevisani, N.; Vila, I.; Vilar Cortabitarte, R.; Abbaneo, D.; Auffray, E.; Auzinger, G.; Bachtis, M.; Baillon, P.; Ball, A. H.; Barney, D.; Benaglia, A.; Bendavid, J.; Benhabib, L.; Benitez, J. F.; Berruti, G. M.; Bloch, P.; Bocci, A.; Bonato, A.; Botta, C.; Breuker, H.; Camporesi, T.; Castello, R.; Cerminara, G.; D'Alfonso, M.; D'Enterria, D.; Dabrowski, A.; Daponte, V.; David, A.; de Gruttola, M.; de Guio, F.; de Roeck, A.; de Visscher, S.; di Marco, E.; Dobson, M.; Dordevic, M.; Dorney, B.; Du Pree, T.; Dünser, M.; Dupont, N.; Elliott-Peisert, A.; Franzoni, G.; Funk, W.; Gigi, D.; Gill, K.; Giordano, D.; Girone, M.; Glege, F.; Guida, R.; Gundacker, S.; Guthoff, M.; Hammer, J.; Harris, P.; Hegeman, J.; Innocente, V.; Janot, P.; Kirschenmann, H.; Kortelainen, M. J.; Kousouris, K.; Krajczar, K.; Lecoq, P.; Lourenço, C.; Lucchini, M. T.; Magini, N.; Malgeri, L.; Mannelli, M.; Martelli, A.; Masetti, L.; Meijers, F.; Mersi, S.; Meschi, E.; Moortgat, F.; Morovic, S.; Mulders, M.; Nemallapudi, M. V.; Neugebauer, H.; Orfanelli, S.; Orsini, L.; Pape, L.; Perez, E.; Peruzzi, M.; Petrilli, A.; Petrucciani, G.; Pfeiffer, A.; Piparo, D.; Racz, A.; Rolandi, G.; Rovere, M.; Ruan, M.; Sakulin, H.; Schäfer, C.; Schwick, C.; Seidel, M.; Sharma, A.; Silva, P.; Simon, M.; Sphicas, P.; Steggemann, J.; Stieger, B.; Stoye, M.; Takahashi, Y.; Treille, D.; Triossi, A.; Tsirou, A.; Veres, G. I.; Wardle, N.; Wöhri, H. K.; Zagozdzinska, A.; Zeuner, W. D.; Bertl, W.; Deiters, K.; Erdmann, W.; Horisberger, R.; Ingram, Q.; Kaestli, H. C.; Kotlinski, D.; Langenegger, U.; Renker, D.; Rohe, T.; Bachmair, F.; Bäni, L.; Bianchini, L.; Casal, B.; Dissertori, G.; Dittmar, M.; Donegà, M.; Eller, P.; Grab, C.; Heidegger, C.; Hits, D.; Hoss, J.; Kasieczka, G.; Lustermann, W.; Mangano, B.; Marionneau, M.; Martinez Ruiz Del Arbol, P.; Masciovecchio, M.; Meister, D.; Micheli, F.; Musella, P.; Nessi-Tedaldi, F.; Pandolfi, F.; Pata, J.; Pauss, F.; Perrozzi, L.; Quittnat, M.; Rossini, M.; Starodumov, A.; Takahashi, M.; Tavolaro, V. R.; Theofilatos, K.; Wallny, R.; Aarrestad, T. K.; Amsler, C.; Caminada, L.; Canelli, M. F.; Chiochia, V.; de Cosa, A.; Galloni, C.; Hinzmann, A.; Hreus, T.; Kilminster, B.; Lange, C.; Ngadiuba, J.; Pinna, D.; Robmann, P.; Ronga, F. J.; Salerno, D.; Yang, Y.; Cardaci, M.; Chen, K. H.; Doan, T. H.; Jain, Sh.; Khurana, R.; Konyushikhin, M.; Kuo, C. M.; Lin, W.; Lu, Y. J.; Yu, S. S.; Kumar, Arun; Bartek, R.; Chang, P.; Chang, Y. H.; Chao, Y.; Chen, K. F.; Chen, P. H.; Dietz, C.; Fiori, F.; Grundler, U.; Hou, W.-S.; Hsiung, Y.; Liu, Y. F.; Lu, R.-S.; Miñano Moya, M.; Petrakou, E.; Tsai, J. F.; Tzeng, Y. M.; Asavapibhop, B.; Kovitanggoon, K.; Singh, G.; Srimanobhas, N.; Suwonjandee, N.; Adiguzel, A.; Cerci, S.; Demiroglu, Z. S.; Dozen, C.; Dumanoglu, I.; Girgis, S.; Gokbulut, G.; Guler, Y.; Guler, Y.; Gurpinar, E.; Hos, I.; Kangal, E. E.; Kayis Topaksu, A.; Onengut, G.; Ozdemir, K.; Ozturk, S.; Tali, B.; Topakli, H.; Vergili, M.; Zorbilmez, C.; Akin, I. V.; Bilin, B.; Bilmis, S.; Isildak, B.; Karapinar, G.; Yalvac, M.; Zeyrek, M.; Gülmez, E.; Kaya, M.; Kaya, O.; Yetkin, E. A.; Yetkin, T.; Cakir, A.; Cankocak, K.; Sen, S.; Vardarlı, F. I.; Grynyov, B.; Levchuk, L.; Sorokin, P.; Aggleton, R.; Ball, F.; Beck, L.; Brooke, J. J.; Clement, E.; Cussans, D.; Flacher, H.; Goldstein, J.; Grimes, M.; Heath, G. P.; Heath, H. F.; Jacob, J.; Kreczko, L.; Lucas, C.; Meng, Z.; Newbold, D. M.; Paramesvaran, S.; Poll, A.; Sakuma, T.; Seif El Nasr-Storey, S.; Senkin, S.; Smith, D.; Smith, V. J.; Bell, K. W.; Belyaev, A.; Brew, C.; Brown, R. M.; Calligaris, L.; Cieri, D.; Cockerill, D. J. A.; Coughlan, J. A.; Harder, K.; Harper, S.; Olaiya, E.; Petyt, D.; Shepherd-Themistocleous, C. H.; Thea, A.; Tomalin, I. R.; Williams, T.; Womersley, W. J.; Worm, S. D.; Baber, M.; Bainbridge, R.; Buchmuller, O.; Bundock, A.; Burton, D.; Casasso, S.; Citron, M.; Colling, D.; Corpe, L.; Cripps, N.; Dauncey, P.; Davies, G.; de Wit, A.; Della Negra, M.; Dunne, P.; Elwood, A.; Elwood, A.; Ferguson, W.; Fulcher, J.; Futyan, D.; Hall, G.; Iles, G.; Kenzie, M.; Lane, R.; Lucas, R.; Lyons, L.; Magnan, A.-M.; Malik, S.; Nash, J.; Nikitenko, A.; Pela, J.; Pesaresi, M.; Petridis, K.; Raymond, D. M.; Richards, A.; Rose, A.; Seez, C.; Tapper, A.; Uchida, K.; Vazquez Acosta, M.; Virdee, T.; Zenz, S. C.; Cole, J. E.; Hobson, P. R.; Khan, A.; Kyberd, P.; Leggat, D.; Leslie, D.; Reid, I. D.; Symonds, P.; Teodorescu, L.; Turner, M.; Borzou, A.; Call, K.; Dittmann, J.; Hatakeyama, K.; Liu, H.; Pastika, N.; Scarborough, T.; Wu, Z.; Charaf, O.; Cooper, S. I.; Henderson, C.; Rumerio, P.; Arcaro, D.; Avetisyan, A.; Bose, T.; Fantasia, C.; Gastler, D.; Lawson, P.; Rankin, D.; Richardson, C.; Rohlf, J.; St. John, J.; Sulak, L.; Zou, D.; Alimena, J.; Berry, E.; Bhattacharya, S.; Cutts, D.; Dhingra, N.; Ferapontov, A.; Garabedian, A.; Hakala, J.; Heintz, U.; Laird, E.; Landsberg, G.; Mao, Z.; Narain, M.; Piperov, S.; Sagir, S.; Syarif, R.; Breedon, R.; Breto, G.; de La Barca Sanchez, M. Calderon; Chauhan, S.; Chertok, M.; Conway, J.; Conway, R.; Cox, P. T.; Erbacher, R.; Gardner, M.; Ko, W.; Lander, R.; Mulhearn, M.; Pellett, D.; Pilot, J.; Ricci-Tam, F.; Shalhout, S.; Smith, J.; Squires, M.; Stolp, D.; Tripathi, M.; Wilbur, S.; Yohay, R.; Cousins, R.; Everaerts, P.; Farrell, C.; Hauser, J.; Ignatenko, M.; Saltzberg, D.; Valuev, V.; Weber, M.; Burt, K.; Clare, R.; Ellison, J.; Gary, J. W.; Hanson, G.; Heilman, J.; Ivova Paneva, M.; Jandir, P.; Kennedy, E.; Lacroix, F.; Long, O. R.; Luthra, A.; Malberti, M.; Negrete, M. Olmedo; Shrinivas, A.; Wei, H.; Wimpenny, S.; Yates, B. R.; Branson, J. G.; Cerati, G. B.; Cittolin, S.; D'Agnolo, R. T.; Derdzinski, M.; Holzner, A.; Kelley, R.; Klein, D.; Letts, J.; MacNeill, I.; Olivito, D.; Padhi, S.; Pieri, M.; Sani, M.; Sharma, V.; Simon, S.; Tadel, M.; Tu, Y.; Vartak, A.; Wasserbaech, S.; Welke, C.; Würthwein, F.; Yagil, A.; Zevi Della Porta, G.; Bradmiller-Feld, J.; Campagnari, C.; Dishaw, A.; Dutta, V.; Flowers, K.; Franco Sevilla, M.; Geffert, P.; George, C.; Golf, F.; Gouskos, L.; Gran, J.; Incandela, J.; McColl, N.; Mullin, S. D.; Mullin, S. D.; Richman, J.; Stuart, D.; Suarez, I.; West, C.; Yoo, J.; Anderson, D.; Apresyan, A.; Bornheim, A.; Bunn, J.; Chen, Y.; Duarte, J.; Mott, A.; Newman, H. B.; Pena, C.; Pierini, M.; Spiropulu, M.; Vlimant, J. R.; Xie, S.; Zhu, R. Y.; Andrews, M. B.; Azzolini, V.; Calamba, A.; Carlson, B.; Ferguson, T.; Paulini, M.; Russ, J.; Sun, M.; Vogel, H.; Vorobiev, I.; Cumalat, J. P.; Ford, W. T.; Gaz, A.; Jensen, F.; Johnson, A.; Krohn, M.; Mulholland, T.; Nauenberg, U.; Stenson, K.; Wagner, S. R.; Alexander, J.; Chatterjee, A.; Chaves, J.; Chu, J.; Dittmer, S.; Eggert, N.; Mirman, N.; Nicolas Kaufman, G.; Patterson, J. R.; Rinkevicius, A.; Ryd, A.; Skinnari, L.; Soffi, L.; Sun, W.; Tan, S. M.; Teo, W. D.; Thom, J.; Thompson, J.; Tucker, J.; Weng, Y.; Wittich, P.; Abdullin, S.; Albrow, M.; Anderson, J.; Apollinari, G.; Banerjee, S.; Bauerdick, L. A. T.; Beretvas, A.; Berryhill, J.; Bhat, P. C.; Bolla, G.; Burkett, K.; Butler, J. N.; Cheung, H. W. K.; Chlebana, F.; Cihangir, S.; Elvira, V. D.; Fisk, I.; Freeman, J.; Gottschalk, E.; Gray, L.; Green, D.; Grünendahl, S.; Gutsche, O.; Hanlon, J.; Hare, D.; Harris, R. M.; Hasegawa, S.; Hirschauer, J.; Hu, Z.; Jindariani, S.; Johnson, M.; Joshi, U.; Jung, A. W.; Klima, B.; Kreis, B.; Kwan, S.; Lammel, S.; Linacre, J.; Lincoln, D.; Lipton, R.; Liu, T.; Lopes de Sá, R.; Lykken, J.; Maeshima, K.; Marraffino, J. M.; Martinez Outschoorn, V. I.; Maruyama, S.; Mason, D.; McBride, P.; Merkel, P.; Mishra, K.; Mrenna, S.; Nahn, S.; Newman-Holmes, C.; O'Dell, V.; Pedro, K.; Prokofyev, O.; Rakness, G.; Sexton-Kennedy, E.; Soha, A.; Spalding, W. J.; Spiegel, L.; Taylor, L.; Tkaczyk, S.; Tran, N. V.; Uplegger, L.; Vaandering, E. W.; Vernieri, C.; Verzocchi, M.; Vidal, R.; Weber, H. A.; Whitbeck, A.; Yang, F.; Acosta, D.; Avery, P.; Bortignon, P.; Bourilkov, D.; Carnes, A.; Carver, M.; Curry, D.; Das, S.; di Giovanni, G. P.; Field, R. D.; Furic, I. K.; Gleyzer, S. V.; Hugon, J.; Konigsberg, J.; Korytov, A.; Low, J. F.; Ma, P.; Matchev, K.; Mei, H.; Milenovic, P.; Mitselmakher, G.; Rank, D.; Rossin, R.; Shchutska, L.; Snowball, M.; Sperka, D.; Terentyev, N.; Thomas, L.; Wang, J.; Wang, S.; Yelton, J.; Hewamanage, S.; Linn, S.; Markowitz, P.; Martinez, G.; Rodriguez, J. L.; Adams, J. R.; Ackert, A.; Adams, T.; Askew, A.; Bochenek, J.; Diamond, B.; Haas, J.; Hagopian, S.; Hagopian, V.; Johnson, K. F.; Khatiwada, A.; Prosper, H.; Weinberg, M.; Baarmand, M. M.; Bhopatkar, V.; Colafranceschi, S.; Hohlmann, M.; Kalakhety, H.; Noonan, D.; Roy, T.; Yumiceva, F.; Adams, M. R.; Apanasevich, L.; Berry, D.; Betts, R. R.; Bucinskaite, I.; Cavanaugh, R.; Evdokimov, O.; Gauthier, L.; Gerber, C. E.; Hofman, D. J.; Kurt, P.; O'Brien, C.; Sandoval Gonzalez, L. D.; Silkworth, C.; Turner, P.; Varelas, N.; Wu, Z.; Zakaria, M.; Bilki, B.; Clarida, W.; Dilsiz, K.; Durgut, S.; Gandrajula, R. P.; Haytmyradov, M.; Khristenko, V.; Merlo, J.-P.; Mermerkaya, H.; Mestvirishvili, A.; Moeller, A.; Nachtman, J.; Ogul, H.; Onel, Y.; Ozok, F.; Penzo, A.; Snyder, C.; Tiras, E.; Wetzel, J.; Yi, K.; Anderson, I.; Anderson, I.; Barnett, B. A.; Blumenfeld, B.; Eminizer, N.; Fehling, D.; Feng, L.; Gritsan, A. V.; Maksimovic, P.; Martin, C.; Osherson, M.; Roskes, J.; Sady, A.; Sarica, U.; Swartz, M.; Xiao, M.; Xin, Y.; You, C.; Xiao, M.; Baringer, P.; Bean, A.; Benelli, G.; Bruner, C.; Kenny, R. P.; Majumder, D.; Majumder, D.; Malek, M.; Murray, M.; Sanders, S.; Stringer, R.; Wang, Q.; Ivanov, A.; Kaadze, K.; Khalil, S.; Makouski, M.; Maravin, Y.; Mohammadi, A.; Saini, L. K.; Skhirtladze, N.; Toda, S.; Lange, D.; Rebassoo, F.; Wright, D.; Anelli, C.; Baden, A.; Baron, O.; Belloni, A.; Calvert, B.; Eno, S. C.; Ferraioli, C.; Gomez, J. A.; Hadley, N. J.; Jabeen, S.; Jabeen, S.; Kellogg, R. G.; Kolberg, T.; Kunkle, J.; Lu, Y.; Mignerey, A. C.; Shin, Y. H.; Skuja, A.; Tonjes, M. B.; Tonwar, S. C.; Apyan, A.; Barbieri, R.; Baty, A.; Bierwagen, K.; Brandt, S.; Bierwagen, K.; Busza, W.; Cali, I. A.; Demiragli, Z.; Di Matteo, L.; Gomez Ceballos, G.; Goncharov, M.; Gulhan, D.; Iiyama, Y.; Innocenti, G. M.; Klute, M.; Kovalskyi, D.; Lai, Y. S.; Lee, Y.-J.; Levin, A.; Luckey, P. D.; Marini, A. C.; McGinn, C.; Mironov, C.; Narayanan, S.; Niu, X.; Paus, C.; Ralph, D.; Roland, C.; Roland, G.; Salfeld-Nebgen, J.; Stephans, G. S. F.; Sumorok, K.; Varma, M.; Velicanu, D.; Veverka, J.; Wang, J.; Wang, T. W.; Wyslouch, B.; Yang, M.; Zhukova, V.; Dahmes, B.; Evans, A.; Finkel, A.; Gude, A.; Hansen, P.; Kalafut, S.; Kao, S. C.; Klapoetke, K.; Kubota, Y.; Lesko, Z.; Mans, J.; Nourbakhsh, S.; Ruckstuhl, N.; Rusack, R.; Tambe, N.; Turkewitz, J.; Acosta, J. G.; Oliveros, S.; Avdeeva, E.; Bloom, K.; Bose, S.; Claes, D. R.; Dominguez, A.; Fangmeier, C.; Gonzalez Suarez, R.; Kamalieddin, R.; Keller, J.; Knowlton, D.; Kravchenko, I.; Meier, F.; Monroy, J.; Ratnikov, F.; Siado, J. E.; Snow, G. R.; Alyari, M.; Dolen, J.; George, J.; Godshalk, A.; Harrington, C.; Iashvili, I.; Kaisen, J.; Kharchilava, A.; Kumar, A.; Rappoccio, S.; Roozbahani, B.; Alverson, G.; Barberis, E.; Baumgartel, D.; Chasco, M.; Hortiangtham, A.; Massironi, A.; Morse, D. M.; Nash, D.; Orimoto, T.; Teixeira de Lima, R.; Trocino, D.; Wang, R.-J.; Wood, D.; Zhang, J.; Hahn, K. A.; Kubik, A.; Mucia, N.; Odell, N.; Pollack, B.; Pozdnyakov, A.; Schmitt, M.; Stoynev, S.; Sung, K.; Trovato, M.; Velasco, M.; Brinkerhoff, A.; Dev, N.; Hildreth, M.; Jessop, C.; Karmgard, D. J.; Kellams, N.; Lannon, K.; Lynch, S.; Marinelli, N.; Meng, F.; Mueller, C.; Musienko, Y.; Pearson, T.; Planer, M.; Reinsvold, A.; Ruchti, R.; Smith, G.; Taroni, S.; Valls, N.; Wayne, M.; Wolf, M.; Woodard, A.; Antonelli, L.; Brinson, J.; Bylsma, B.; Durkin, L. S.; Flowers, S.; Hart, A.; Hill, C.; Hughes, R.; Ji, W.; Kotov, K.; Ling, T. Y.; Liu, B.; Luo, W.; Puigh, D.; Rodenburg, M.; Winer, B. L.; Wulsin, H. W.; Driga, O.; Elmer, P.; Hardenbrook, J.; Hebda, P.; Koay, S. A.; Lujan, P.; Marlow, D.; Medvedeva, T.; Mooney, M.; Olsen, J.; Palmer, C.; Piroué, P.; Saka, H.; Stickland, D.; Tully, C.; Zuranski, A.; Malik, S.; Barnes, V. E.; Benedetti, D.; Bortoletto, D.; Gutay, L.; Jha, M. K.; Jones, M.; Jung, K.; Miller, D. H.; Neumeister, N.; Primavera, F.; Radburn-Smith, B. C.; Shi, X.; Shipsey, I.; Silvers, D.; Sun, J.; Svyatkovskiy, A.; Wang, F.; Xie, W.; Xu, L.; Parashar, N.; Stupak, J.; Adair, A.; Akgun, B.; Chen, Z.; Ecklund, K. M.; Geurts, F. J. M.; Guilbaud, M.; Li, W.; Michlin, B.; Northup, M.; Padley, B. P.; Redjimi, R.; Roberts, J.; Rorie, J.; Tu, Z.; Zabel, J.; Betchart, B.; Bodek, A.; de Barbaro, P.; Demina, R.; Eshaq, Y.; Ferbel, T.; Galanti, M.; Galanti, M.; Garcia-Bellido, A.; Han, J.; Harel, A.; Hindrichs, O.; Hindrichs, O.; Khukhunaishvili, A.; Petrillo, G.; Tan, P.; Verzetti, M.; Arora, S.; Barker, A.; Chou, J. P.; Contreras-Campana, C.; Contreras-Campana, E.; Duggan, D.; Ferencek, D.; Gershtein, Y.; Gray, R.; Halkiadakis, E.; Hidas, D.; Hughes, E.; Kaplan, S.; Kunnawalkam Elayavalli, R.; Lath, A.; Nash, K.; Panwalkar, S.; Park, M.; Salur, S.; Schnetzer, S.; Sheffield, D.; Somalwar, S.; Stone, R.; Thomas, S.; Thomassen, P.; Walker, M.; Foerster, M.; Riley, G.; Rose, K.; Spanier, S.; York, A.; Bouhali, O.; Castaneda Hernandez, A.; Dalchenko, M.; de Mattia, M.; Delgado, A.; Dildick, S.; Dildick, S.; Eusebi, R.; Gilmore, J.; Kamon, T.; Krutelyov, V.; Krutelyov, V.; Mueller, R.; Osipenkov, I.; Pakhotin, Y.; Patel, R.; Patel, R.; Perloff, A.; Rose, A.; Safonov, A.; Tatarinov, A.; Ulmer, K. A.; Akchurin, N.; Cowden, C.; Damgov, J.; Dragoiu, C.; Dudero, P. R.; Faulkner, J.; Kunori, S.; Lamichhane, K.; Lee, S. W.; Libeiro, T.; Undleeb, S.; Volobouev, I.; Appelt, E.; Delannoy, A. G.; Greene, S.; Gurrola, A.; Janjam, R.; Johns, W.; Maguire, C.; Mao, Y.; Melo, A.; Ni, H.; Sheldon, P.; Snook, B.; Tuo, S.; Velkovska, J.; Xu, Q.; Arenton, M. W.; Cox, B.; Francis, B.; Goodell, J.; Hirosky, R.; Ledovskoy, A.; Li, H.; Lin, C.; Neu, C.; Sinthuprasith, T.; Sun, X.; Wang, Y.; Wolfe, E.; Wood, J.; Xia, F.; Clarke, C.; Harr, R.; Karchin, P. E.; Kottachchi Kankanamge Don, C.; Lamichhane, P.; Sturdy, J.; Belknap, D. A.; Carlsmith, D.; Cepeda, M.; Dasu, S.; Dodd, L.; Duric, S.; Gomber, B.; Grothe, M.; Hall-Wilton, R.; Herndon, M.; Hervé, A.; Klabbers, P.; Lanaro, A.; Levine, A.; Long, K.; Loveless, R.; Mohapatra, A.; Ojalvo, I.; Perry, T.; Pierro, G. A.; Polese, G.; Ruggles, T.; Sarangi, T.; Savin, A.; Sharma, A.; Smith, N.; Smith, W. H.; Taylor, D.; Woods, N.; Collaboration, [Authorinst]The Cms

    2016-07-01

    Jet multiplicity distributions in top quark pair ({t}{overline{t}}) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 {fb}^ {-1}. The measurement is performed in the dilepton decay channels (e^+e^-, μ^+ μ^-, and e^{±} μ^{∓}). The absolute and normalized differential cross sections for {t}overline{t} production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential {t overline{t} b} and {t overline{t} b overline{b}} cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. The data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading order calculation.

  18. Measurement of $$\\mathrm{ t \\bar{t} } $$ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $$\\sqrt{s} =$$ 8 TeV

    DOE PAGES

    Khachatryan, Vardan

    2016-07-07

    Jet multiplicity distributions in top quark pair (tt-bar) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-,μ+μ- and e±μ∓). Furthermore, the absolute and normalized differential cross sections for tt-bar production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-barb and tt-barbb-bar cross sections are presented formore » the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.« less

  19. Influence of physico-chemical factors on leaching of chemical additives from aluminium foils used for packaging of food materials.

    PubMed

    Ojha, Priyanka; Ojha, C S; Sharma, V P

    2007-01-01

    In recent years, the use of aluminium foils to wrap foodstuff and commodities has been increased to a great extent. Aluminium was found to leach out from the foil in different simulants particularly in distilled water, acidic and alkaline medium at 60 +/- 2 degrees C for 2 hours and 40 +/- 2 degrees C for 24 hours. The migration was found to be above the permissible limit as laid down by WHO guidelines, that is of 0.2 mg/L of water. The protocol used for this study was based on the recommendation of Bureau of Indian Standard regarding the migration of chemical additives from packaging materials used to pack food items. Migration of the aluminium metal was found significantly higher in acidic and aqueous medium in comparison to alcoholic and saline medium. Higher temperature conditions also enhanced the rate of migration of aluminium in acidic and aqueous medium. Leaching of aluminium metal occurred in double distilled water, acetic acid 3%, normal saline and sodium carbonate, except ethanol 8%, in which aluminium migration was below the detection limit of the instrument where three brands of the aluminium foil samples studied.

  20. The severity of retinal pathology in homozygous Crb1rd8/rd8 mice is dependent on additional genetic factors.

    PubMed

    Luhmann, Ulrich F O; Carvalho, Livia S; Holthaus, Sophia-Martha Kleine; Cowing, Jill A; Greenaway, Simon; Chu, Colin J; Herrmann, Philipp; Smith, Alexander J; Munro, Peter M G; Potter, Paul; Bainbridge, James W B; Ali, Robin R

    2015-01-01

    Understanding phenotype-genotype correlations in retinal degeneration is a major challenge. Mutations in CRB1 lead to a spectrum of autosomal recessive retinal dystrophies with variable phenotypes suggesting the influence of modifying factors. To establish the contribution of the genetic background to phenotypic variability associated with the Crb1(rd8/rd8) mutation, we compared the retinal pathology of Crb1(rd8/rd8)/J inbred mice with that of two Crb1(rd8/rd8) lines backcrossed with C57BL/6JOlaHsd mice. Topical endoscopic fundal imaging and scanning laser ophthalmoscopy fundus images of all three Crb1(rd8/rd8) lines showed a significant increase in the number of inferior retinal lesions that was strikingly variable between the lines. Optical coherence tomography, semithin, ultrastructural morphology and assessment of inflammatory and vascular marker by immunohistochemistry and quantitative reverse transcriptase-polymerase chain reaction revealed that the lesions were associated with photoreceptor death, Müller and microglia activation and telangiectasia-like vascular remodelling-features that were stable in the inbred, variable in the second, but virtually absent in the third Crb1(rd8/rd8) line, even at 12 months of age. This suggests that the Crb1(rd8/rd8) mutation is necessary, but not sufficient for the development of these degenerative features. By whole-genome SNP analysis of the genotype-phenotype correlation, a candidate region on chromosome 15 was identified. This may carry one or more genetic modifiers for the manifestation of the retinal pathology associated with mutations in Crb1. This study also provides insight into the nature of the retinal vascular lesions that likely represent a clinical correlate for the formation of retinal telangiectasia or Coats-like vasculopathy in patients with CRB1 mutations that are thought to depend on such genetic modifiers.

  1. Physiological basis of tolerance to complete submergence in rice involves genetic factors in addition to the SUB1 gene.

    PubMed

    Singh, Sudhanshu; Mackill, David J; Ismail, Abdelbagi M

    2014-01-01

    1 lines. This suggests the possibility of further improvements in submergence tolerance by incorporating additional traits present in FR13A or other similar landraces. PMID:25281725

  2. The RNA-Binding Chaperone Hfq Is an Important Global Regulator of Gene Expression in Pasteurella multocida and Plays a Crucial Role in Production of a Number of Virulence Factors, Including Hyaluronic Acid Capsule

    PubMed Central

    Mégroz, Marianne; Kleifeld, Oded; Wright, Amy; Powell, David; Harrison, Paul; Adler, Ben; Harper, Marina

    2016-01-01

    The Gram-negative bacterium Pasteurella multocida is the causative agent of a number of economically important animal diseases, including avian fowl cholera. Numerous P. multocida virulence factors have been identified, including capsule, lipopolysaccharide (LPS), and filamentous hemagglutinin, but little is known about how the expression of these virulence factors is regulated. Hfq is an RNA-binding protein that facilitates riboregulation via interaction with small noncoding RNA (sRNA) molecules and their mRNA targets. Here, we show that a P. multocida hfq mutant produces significantly less hyaluronic acid capsule during all growth phases and displays reduced in vivo fitness. Transcriptional and proteomic analyses of the hfq mutant during mid-exponential-phase growth revealed altered transcript levels for 128 genes and altered protein levels for 78 proteins. Further proteomic analyses of the hfq mutant during the early exponential growth phase identified 106 proteins that were produced at altered levels. Both the transcript and protein levels for genes/proteins involved in capsule biosynthesis were reduced in the hfq mutant, as were the levels of the filamentous hemagglutinin protein PfhB2 and its secretion partner LspB2. In contrast, there were increased expression levels of three LPS biosynthesis genes, encoding proteins involved in phosphocholine and phosphoethanolamine addition to LPS, suggesting that these genes are negatively regulated by Hfq-dependent mechanisms. Taken together, these data provide the first evidence that Hfq plays a crucial role in regulating the global expression of P. multocida genes, including the regulation of key P. multocida virulence factors, capsule, LPS, and filamentous hemagglutinin. PMID:26883595

  3. The RNA-Binding Chaperone Hfq Is an Important Global Regulator of Gene Expression in Pasteurella multocida and Plays a Crucial Role in Production of a Number of Virulence Factors, Including Hyaluronic Acid Capsule.

    PubMed

    Mégroz, Marianne; Kleifeld, Oded; Wright, Amy; Powell, David; Harrison, Paul; Adler, Ben; Harper, Marina; Boyce, John D

    2016-05-01

    The Gram-negative bacterium Pasteurella multocida is the causative agent of a number of economically important animal diseases, including avian fowl cholera. Numerous P. multocida virulence factors have been identified, including capsule, lipopolysaccharide (LPS), and filamentous hemagglutinin, but little is known about how the expression of these virulence factors is regulated. Hfq is an RNA-binding protein that facilitates riboregulation via interaction with small noncoding RNA (sRNA) molecules and their mRNA targets. Here, we show that a P. multocida hfq mutant produces significantly less hyaluronic acid capsule during all growth phases and displays reduced in vivo fitness. Transcriptional and proteomic analyses of the hfq mutant during mid-exponential-phase growth revealed altered transcript levels for 128 genes and altered protein levels for 78 proteins. Further proteomic analyses of the hfq mutant during the early exponential growth phase identified 106 proteins that were produced at altered levels. Both the transcript and protein levels for genes/proteins involved in capsule biosynthesis were reduced in the hfq mutant, as were the levels of the filamentous hemagglutinin protein PfhB2 and its secretion partner LspB2. In contrast, there were increased expression levels of three LPS biosynthesis genes, encoding proteins involved in phosphocholine and phosphoethanolamine addition to LPS, suggesting that these genes are negatively regulated by Hfq-dependent mechanisms. Taken together, these data provide the first evidence that Hfq plays a crucial role in regulating the global expression of P. multocida genes, including the regulation of key P. multocida virulence factors, capsule, LPS, and filamentous hemagglutinin. PMID:26883595

  4. The RNA-Binding Chaperone Hfq Is an Important Global Regulator of Gene Expression in Pasteurella multocida and Plays a Crucial Role in Production of a Number of Virulence Factors, Including Hyaluronic Acid Capsule.

    PubMed

    Mégroz, Marianne; Kleifeld, Oded; Wright, Amy; Powell, David; Harrison, Paul; Adler, Ben; Harper, Marina; Boyce, John D

    2016-05-01

    The Gram-negative bacterium Pasteurella multocida is the causative agent of a number of economically important animal diseases, including avian fowl cholera. Numerous P. multocida virulence factors have been identified, including capsule, lipopolysaccharide (LPS), and filamentous hemagglutinin, but little is known about how the expression of these virulence factors is regulated. Hfq is an RNA-binding protein that facilitates riboregulation via interaction with small noncoding RNA (sRNA) molecules and their mRNA targets. Here, we show that a P. multocida hfq mutant produces significantly less hyaluronic acid capsule during all growth phases and displays reduced in vivo fitness. Transcriptional and proteomic analyses of the hfq mutant during mid-exponential-phase growth revealed altered transcript levels for 128 genes and altered protein levels for 78 proteins. Further proteomic analyses of the hfq mutant during the early exponential growth phase identified 106 proteins that were produced at altered levels. Both the transcript and protein levels for genes/proteins involved in capsule biosynthesis were reduced in the hfq mutant, as were the levels of the filamentous hemagglutinin protein PfhB2 and its secretion partner LspB2. In contrast, there were increased expression levels of three LPS biosynthesis genes, encoding proteins involved in phosphocholine and phosphoethanolamine addition to LPS, suggesting that these genes are negatively regulated by Hfq-dependent mechanisms. Taken together, these data provide the first evidence that Hfq plays a crucial role in regulating the global expression of P. multocida genes, including the regulation of key P. multocida virulence factors, capsule, LPS, and filamentous hemagglutinin.

  5. Clinicopathological Characteristics of Gynecological Cancer Associated with Hypoxia-Inducible Factor 1α Expression: A Meta-Analysis Including 6,612 Subjects

    PubMed Central

    Ma, Xiaowei; Liang, Xiaowen; Liu, Xin; Wang, Yu

    2015-01-01

    Background Gynecological cancer is characterized by tumor hypoxia. However, the role of hypoxia-inducible factor 1α (HIF-1α) in gynecological cancer remains unclear. Method Electronic databases including Cochrane Library, PUBMED, Web of Knowledge and clinical trial registries were searched from inception through October 2014 for published, case-control studies assessing the association between HIF-1α and the clinicopathological characteristics of gynecological cancer. We pooled results from 59 studies using fixed or random-effects models and present results as odds ratios (ORs) following the PRISMA guidelines. Results Our meta-analysis, which included 6,612 women, demonstrated that the expression of HIF-1α was associated with the clinicopathological characteristics of gynecological cancer. The expression of HIF-1α in cancer or borderline tissue was significantly higher than that in normal tissue (cancer vs. normal: odds ratio (OR) =9.59, 95% confidence interval (CI): 5.97, 15.39, p<0.00001; borderline vs. normal: OR=4.13, 95% (CI): 2.43, 7.02, p<0.00001; cancer vs. borderline: OR=2.70, 95% (CI): 1.69, 4.31, p<0.0001). The expression of HIF-1α in III‒IV stage or lymph node metastasis was significantly higher than that in I‒II stage or that without lymph node metastasis, respectively (OR=2.66, 95% (CI): 1.87,3.79, p<0.00001; OR= 3.98, 95% (CI): 2.10,12.89, p<0.0001). HIF-1α was associated with histological grade of cancer (Grade 3 vs. Grade 1: OR=3.77, 95% (CI): 2.76,5.16, p<0.00001; Grade 3 vs. Grade 2: OR=1.62, 95% (CI): 1.20,2.19, p=0.002; Grade 2 vs. Grade 1: OR=2.34, 95% (CI): 1.82,3.00, p<0.00001),5-years disease free survival (DFS) rates (OR=2.93, 95% (CI):1.43,6.01, p=0.001) and 5-years overall survival (OS) rates (OR=5.53, 95% (CI): 2.48,12.31, p<0.0001). Conclusion HIF-1α is associated with the malignant degree, FIGO stage, histological grade, lymph node metastasis, 5-years survival rate and recurrence rate of gynecological cancer. It may play

  6. Social and Demographic Factors Associated with Morbidities in Young Children in Egypt: A Bayesian Geo-Additive Semi-Parametric Multinomial Model

    PubMed Central

    Khatab, Khaled; Adegboye, Oyelola; Mohammed, Taofeeq Ibn

    2016-01-01

    Background Globally, the burden of mortality in children, especially in poor developing countries, is alarming and has precipitated concern and calls for concerted efforts in combating such health problems. Examples of diseases that contribute to this burden of mortality include diarrhoea, cough, fever, and the overlap between these illnesses, causing childhood morbidity and mortality. Methods To gain insight into these health issues, we employed the 2008 Demographic and Health Survey Data of Egypt, which recorded details from 10,872 children under five. This data focused on the demographic and socio-economic characteristics of household members. We applied a Bayesian multinomial model to assess the area-specific spatial effects and risk factors of co-morbidity of fever, diarrhoea and cough for children under the age of five. Results The results showed that children under 20 months of age were more likely to have the three diseases (OR: 6.8; 95% CI: 4.6–10.2) than children between 20 and 40 months (OR: 2.14; 95% CI: 1.38–3.3). In multivariate Bayesian geo-additive models, the children of mothers who were over 20 years of age were more likely to have only cough (OR: 1.2; 95% CI: 0.9–1.5) and only fever (OR: 1.2; 95% CI: 0.91–1.51) compared with their counterparts. Spatial results showed that the North-eastern region of Egypt has a higher incidence than most of other regions. Conclusions This study showed geographic patterns of Egyptian governorates in the combined prevalence of morbidity among Egyptian children. It is obvious that the Nile Delta, Upper Egypt, and south-eastern Egypt have high rates of diseases and are more affected. Therefore, more attention is needed in these areas. PMID:27442018

  7. The effectiveness of power-generating complexes constructed on the basis of nuclear power plants combined with additional sources of energy determined taking risk factors into account

    NASA Astrophysics Data System (ADS)

    Aminov, R. Z.; Khrustalev, V. A.; Portyankin, A. V.

    2015-02-01

    The effectiveness of combining nuclear power plants equipped with water-cooled water-moderated power-generating reactors (VVER) with other sources of energy within unified power-generating complexes is analyzed. The use of such power-generating complexes makes it possible to achieve the necessary load pickup capability and flexibility in performing the mandatory selective primary and emergency control of load, as well as participation in passing the night minimums of electric load curves while retaining high values of the capacity utilization factor of the entire power-generating complex at higher levels of the steam-turbine part efficiency. Versions involving combined use of nuclear power plants with hydrogen toppings and gas turbine units for generating electricity are considered. In view of the fact that hydrogen is an unsafe energy carrier, the use of which introduces additional elements of risk, a procedure for evaluating these risks under different conditions of implementing the fuel-and-hydrogen cycle at nuclear power plants is proposed. Risk accounting technique with the use of statistical data is considered, including the characteristics of hydrogen and gas pipelines, and the process pipelines equipment tightness loss occurrence rate. The expected intensities of fires and explosions at nuclear power plants fitted with hydrogen toppings and gas turbine units are calculated. In estimating the damage inflicted by events (fires and explosions) occurred in nuclear power plant turbine buildings, the US statistical data were used. Conservative scenarios of fires and explosions of hydrogen-air mixtures in nuclear power plant turbine buildings are presented. Results from calculations of the introduced annual risk to the attained net annual profit ratio in commensurable versions are given. This ratio can be used in selecting projects characterized by the most technically attainable and socially acceptable safety.

  8. Nomogram including the total tumoral load in the sentinel nodes assessed by one-step nucleic acid amplification as a new factor for predicting nonsentinel lymph node metastasis in breast cancer patients.

    PubMed

    Rubio, Isabel T; Espinosa-Bravo, Martin; Rodrigo, Maxi; Amparo Viguri Diaz, Maria; Hardisson, David; Sagasta, Amaia; Dueñas, Basilio; Peg, Vicente

    2014-09-01

    Several models have been developed to predict non-sentinel nodes (NSLN) metastasis in patients with a positive sentinel node (SLN) that incorporates a standard pathology examination of the SLN. It has been reported that total tumoral load (TTL) in the SLNs assessed by one-step nucleic acid amplification (OSNA) is a predictive factor for additional NSLN metastasis in the axillary lymph node dissection (ALND). The objective was to develop a nomogram that predicts patient´s risk of additional NSLN metastasis incorporating TTL in the SLNs assessed by OSNA. Six hundred and ninety-seven consecutive patients with positive SLN evaluation by OSNA and a completion ALND were recruited. Pathologic features of the primary tumor and SLN metastases, including TTL were collected. Multivariate logistic regression identified factors predictive of non-SLN metastasis. A nomogram was developed with these variables and validated in an external cohort. On multivariate logistic regression analysis, tumor size, number of affected SLN, Her2 overexpression, lymphovascular invasion, and TTL were each associated with the likelihood of additional NSLN metastasis (p < 0.05). The overall predictive accuracy of the nomogram, as measured by the AUC was 0.7552 (95 %CI 0.7159-0.7945). When applied to the external cohort the nomogram was accurate with an AUC = 0.678 (95 %CI 0.621-0.736). This novel nomogram that incorporates TTL assessed by OSNA performs well and may help clinicians to make decisions about ALND for individual patients. Moreover, the standardization of pathologic assessment by OSNA may help to achieve interinstitutional reproducibility among nomograms. PMID:25164972

  9. Analysis of Air Toxics From NOAA WP-3 Aircraft Measurements During the TexAQS 2006 Campaign: Comparison With Emission Inventories and Additive Inhalation Risk Factors

    NASA Astrophysics Data System (ADS)

    Del Negro, L. A.; Warneke, C.; de Gouw, J. A.; Atlas, E.; Lueb, R.; Zhu, X.; Pope, L.; Schauffler, S.; Hendershot, R.; Washenfelder, R.; Fried, A.; Richter, D.; Walega, J. G.; Weibring, P.

    2007-12-01

    Benzene and nine other air toxics classified as human carcinogens by the International Agency for Research on Cancer (IARC) were measured from the NOAA WP-3 aircraft during the TexAQS 2006 campaign. In-situ measurements of benzene, measured with a PTR-MS instrument, are used to estimate emission fluxes for comparison with point source emission inventories developed by the Texas Commission on Environmental Quality. Mean and median mixing ratios for benzene, acetaldehyde, formaldehyde, 1,3-butadiene, carbon tetrachloride, chloroform, 1,2-dichloroethane, dibromoethane, dichloromethane, and vinyl chloride, encountered over the city of Houston during the campaign, are combined with inhalation unit risk factor values developed by the California Environmental Protection Agency and the United States Environmental Protection Agency to estimate the additive inhalation risk factor. This additive risk factor represents the risk associated with lifetime (70 year) exposure at the levels measured and should not be used as an absolute indicator of risk to individuals. However, the results are useful for assessments of changing relative risk over time, and for identifying dominant contributions to the overall air toxic risk.

  10. Human factors issues and approaches in the spatial layout of a space station control room, including the use of virtual reality as a design analysis tool

    NASA Technical Reports Server (NTRS)

    Hale, Joseph P., II

    1994-01-01

    Human Factors Engineering support was provided for the 30% design review of the late Space Station Freedom Payload Control Area (PCA). The PCA was to be the payload operations control room, analogous to the Spacelab Payload Operations Control Center (POCC). This effort began with a systematic collection and refinement of the relevant requirements driving the spatial layout of the consoles and PCA. This information was used as input for specialized human factors analytical tools and techniques in the design and design analysis activities. Design concepts and configuration options were developed and reviewed using sketches, 2-D Computer-Aided Design (CAD) drawings, and immersive Virtual Reality (VR) mockups.

  11. {sup 13}C chemical shift anisotropies for carbonate ions in cement minerals and the use of {sup 13}C, {sup 27}Al and {sup 29}Si MAS NMR in studies of Portland cement including limestone additions

    SciTech Connect

    Sevelsted, Tine F.; Herfort, Duncan

    2013-10-15

    {sup 13}C isotropic chemical shifts and chemical shift anisotropy parameters have been determined for a number of inorganic carbonates relevant in cement chemistry from slow-speed {sup 13}C MAS or {sup 13}C({sup 1}H) CP/MAS NMR spectra (9.4 T or 14.1 T) for {sup 13}C in natural abundance. The variation in the {sup 13}C chemical shift parameters is relatively small, raising some doubts that different carbonate species in Portland cement-based materials may not be sufficiently resolved in {sup 13}C MAS NMR spectra. However, it is shown that by combining {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR carbonate anions in anhydrous and hydrated phases can be distinguished, thereby providing valuable information about the reactivity of limestone in cement blends. This is illustrated for three cement pastes prepared from an ordinary Portland cement, including 0, 16, and 25 wt.% limestone, and following the hydration for up to one year. For these blends {sup 29}Si MAS NMR reveals that the limestone filler accelerates the hydration for alite and also results in a smaller fraction of tetrahedrally coordinated Al incorporated in the C-S-H phase. The latter result is more clearly observed in {sup 27}Al MAS NMR spectra of the cement–limestone blends and suggests that dissolved aluminate species in the cement–limestone blends readily react with carbonate ions from the limestone filler, forming calcium monocarboaluminate hydrate. -- Highlights: •{sup 13}C chemical shift anisotropies for inorganic carbonates from {sup 13}C MAS NMR. •Narrow {sup 13}C NMR chemical shift range (163–171 ppm) for inorganic carbonates. •Anhydrous and hydrated carbonate species by {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR. •Limestone accelerates the hydration for alite in Portland – limestone cements. •Limestone reduces the amount of aluminium incorporated in the C-S-H phase.

  12. Expanding the lens of evidence-based practice in psychotherapy to include a common factors perspective: comment on Laska, Gurman, and Wampold.

    PubMed

    Asnaani, Anu; Foa, Edna B

    2014-12-01

    Laska, Gurman, and Wampold (2014, pp. 467-481) raise a number of interesting arguments for clinical practice that involves the integration of the Common Factors and Empirically Supported Therapies perspectives. The merits, validity, and weaknesses in these arguments are discussed from a conceptual and empirical viewpoint. While we agree that the division in the field between the 2 approaches is excessive and interferes in the delivery of effective patient care, we highlight the important reasons to use unbiased, replicable assessments of treatment effects and interpretation when choosing a treatment approach. We emphasize the need to conduct empirical comparisons using study designs that allow us to vigorously test the influence of common factors over and beyond specific treatment ingredients, before we can more widely advocate for their necessary inclusion in existing treatments.

  13. [The logistic regression model including interactions between the factor variables demonstrated for the detection of E. coli O157.H7 in artificially contaminated minced beef].

    PubMed

    Failing, K; Massing, S; Bülte, M

    2004-05-01

    Logistic regression is a powerful tool to analyse data sets with a dichotomous response variable. However, in most situations it is used as a model without interactions between the factor variables. This is done either by presumption or to avoid difficulties in the interpretation of the statistical results. In this article first the model of simple logistic regression without interactions is introduced followed by the expanded model with pairwise interactions between the factors. The application of both models is demonstrated at the present data set concerning the detection of E. coli O157.H7 in artificially contaminated minced beef. The influencing variables are the factors enrichment time, inoculation density, enrichment broth, subculturing medium, and state of samples (fresh vs. deep frozen). The statistical reanalysis displayed strongly differing results emphasizing the importance of interactions in logistic regression models. In particular, the odds ratio for E. coli detection dependant from the enrichment time (24 h vs. 6 h) (OR = 0.41) was strongly overestimated without simultaneous attention of the E. coli inoculation density (OR approximately equal to 0.2 to 0.02). In this context the possible interpretation of the interaction is discussed.

  14. The Chronic Pain Acceptance Questionnaire (CPAQ)-further validation including a confirmatory factor analysis and a comparison with the Tampa Scale of Kinesiophobia.

    PubMed

    Wicksell, Rikard K; Olsson, Gunnar L; Melin, Lennart

    2009-08-01

    Acceptance of pain and distress has lately appeared as an important factor in determining peoples' ability to restore functioning in the presence of chronic pain. Although treatments based on cognitive behaviour therapy are beginning to incorporate acceptance strategies, there is still a lack of reliable and valid instruments to assess relevant processes in such interventions. The Chronic Pain Acceptance Questionnaire (CPAQ) was originally constructed as part of the development of an acceptance oriented treatment approach for pain patients. A revised 20-item version of the instrument with two subscales has shown adequate reliability and validity. In the present study, a Swedish translation of CPAQ was evaluated with 611 participants reporting chronic pain and symptoms of whiplash associated disorders. This study sought to further assess the psychometric properties of the instrument and to investigate its relation to another important measure of pain adjustment, the Tampa Scale of Kinesiophobia. Due to low intercorrelations with other items, item 16 was excluded. Exploratory and confirmatory factor analyses supported the previously suggested two-factor solution. Furthermore, the internal consistencies were good for the subscales (activities engagement and pain willingness) as well as the total scale. Hierarchical regression analyses illustrated strong relations with criteria variables (e.g. disability and life satisfaction). In general, the activities engagement subscale contributed more than pain willingness to the prediction of criteria variables. Furthermore, results illustrated that CPAQ explained more variance than the Tampa Scale of Kinesiophobia in pain intensity, disability, life satisfaction, and depression.

  15. Experimental Determination of the Recovery Factor and Analytical Solution of the Conical Flow Field for a 20 deg Included Angle Cone at Mach Numbers of 4.6 and 6.0 and Stagnation Temperatures to 2600 degree R

    NASA Technical Reports Server (NTRS)

    Pfyl, Frank A.; Presley, Leroy L.

    1961-01-01

    The local recovery factor was determined experimentally along the surface of a thin-walled 20 deg included angle cone for Mach numbers near 6.0 at stagnation temperatures between 1200 deg R and 2600 deg R. In addition, a similar cone configuration was tested at Mach numbers near 4.5 at stagnation temperatures of approximately 612 deg R. The local Reynolds number based on flow properties at the edge of the boundary layer ranged between 0.1 x 10(exp 4) and 3.5 x 10(exp 4) for tests at temperatures above 1200 deg R and between 6 x 10(exp 4) and 25 x 10(exp 4) for tests at temperatures near 612 deg R. The results indicated, generally, that the recovery factor can be predicted satisfactorily using the square root of the Prandtl number. No conclusion could be made as to the necessity of evaluating the Prandtl number at a reference temperature given by an empirical equation, as opposed to evaluating the Prandtl number at the wall temperature or static temperature of the gas at the cone surface. For the tests at temperatures above 1200 deg R (indicated herein as the tests conducted in the slip-flow region), two definite trends in the recovery data were observed - one of increasing recovery factor with decreasing stagnation pressure, which was associated with slip-flow effects and one of decreasing recovery factor with increasing temperature. The true cause of the latter trend could not be ascertained, but it was shown that this trend was not appreciably altered by the sources of error of the magnitude considered herein. The real-gas equations of state were used to determine accurately the local stream properties at the outer edge of the boundary layer of the cone. Included in the report, therefore, is a general solution for the conical flow of a real gas using the Beattie-Bridgeman equation of state. The largest effect of temperature was seen to be in the terms which were dependent upon the internal energy of the gas. The pressure and hence the pressure drag terms were

  16. UV-B-responsive association of the Arabidopsis bZIP transcription factor ELONGATED HYPOCOTYL5 with target genes, including its own promoter.

    PubMed

    Binkert, Melanie; Kozma-Bognár, László; Terecskei, Kata; De Veylder, Lieven; Nagy, Ferenc; Ulm, Roman

    2014-10-01

    In plants subjected to UV-B radiation, responses are activated that minimize damage caused by UV-B. The bZIP transcription factor ELONGATED HYPOCOTYL5 (HY5) acts downstream of the UV-B photoreceptor UV RESISTANCE LOCUS8 (UVR8) and promotes UV-B-induced photomorphogenesis and acclimation. Expression of HY5 is induced by UV-B; however, the transcription factor(s) that regulate HY5 transcription in response to UV-B and the impact of UV-B on the association of HY5 with its target promoters are currently unclear. Here, we show that HY5 binding to the promoters of UV-B-responsive genes is enhanced by UV-B in a UVR8-dependent manner in Arabidopsis thaliana. In agreement, overexpression of REPRESSOR OF UV-B PHOTOMORPHOGENESIS2, a negative regulator of UVR8 function, blocks UV-B-responsive HY5 enrichment at target promoters. Moreover, we have identified a T/G-box in the HY5 promoter that is required for its UV-B responsiveness. We show that HY5 and its homolog HYH bind to the T/G(HY5)-box cis-acting element and that they act redundantly in the induction of HY5 expression upon UV-B exposure. Therefore, HY5 is enriched at target promoters in response to UV-B in a UVR8 photoreceptor-dependent manner, and HY5 and HYH interact directly with a T/G-box cis-acting element of the HY5 promoter, mediating the transcriptional activation of HY5 in response to UV-B.

  17. UV-B-Responsive Association of the Arabidopsis bZIP Transcription Factor ELONGATED HYPOCOTYL5 with Target Genes, Including Its Own Promoter[W][OPEN

    PubMed Central

    Binkert, Melanie; Kozma-Bognár, László; Terecskei, Kata; De Veylder, Lieven; Nagy, Ferenc; Ulm, Roman

    2014-01-01

    In plants subjected to UV-B radiation, responses are activated that minimize damage caused by UV-B. The bZIP transcription factor ELONGATED HYPOCOTYL5 (HY5) acts downstream of the UV-B photoreceptor UV RESISTANCE LOCUS8 (UVR8) and promotes UV-B-induced photomorphogenesis and acclimation. Expression of HY5 is induced by UV-B; however, the transcription factor(s) that regulate HY5 transcription in response to UV-B and the impact of UV-B on the association of HY5 with its target promoters are currently unclear. Here, we show that HY5 binding to the promoters of UV-B-responsive genes is enhanced by UV-B in a UVR8-dependent manner in Arabidopsis thaliana. In agreement, overexpression of REPRESSOR OF UV-B PHOTOMORPHOGENESIS2, a negative regulator of UVR8 function, blocks UV-B-responsive HY5 enrichment at target promoters. Moreover, we have identified a T/G-box in the HY5 promoter that is required for its UV-B responsiveness. We show that HY5 and its homolog HYH bind to the T/GHY5-box cis-acting element and that they act redundantly in the induction of HY5 expression upon UV-B exposure. Therefore, HY5 is enriched at target promoters in response to UV-B in a UVR8 photoreceptor-dependent manner, and HY5 and HYH interact directly with a T/G-box cis-acting element of the HY5 promoter, mediating the transcriptional activation of HY5 in response to UV-B. PMID:25351492

  18. Proposal for therapeutic approach based on prognostic factors including morphometric and flow-cytometric features in stage III-IV ovarian cancer.

    PubMed

    Wils, J; van Geuns, H; Baak, J

    1988-05-01

    In 73 patients with International Federation of Gynecology and Obstetrics (FIGO) Stage III and IV ovarian cancer the prognostic significance of morphometric and flow-cytometric features has been evaluated in comparison with more commonly used prognostic factors such as stage and tumor mass. Single features associated with prognosis were as follows: FIGO stage, bulky disease, mean and standard deviation of nuclear area, cellular DNA content, mitotic activity index, and volume percentage epithelium. Multivariate analysis showed that the most significant prognostic combination of features consisted of mean nuclear area, presence or absence of bulky disease, and FIGO stage (in sequence of decreasing importance; Mantel-Cox = 23.07, P less than 0.00001). On the basis of these factors patients with a poor prognosis can be identified. On the other hand two features were associated with an excellent prognosis namely a low mitotic index and a low-volume percentage epithelium. It is concluded that morphometric and flow-cytometric analysis in combination with clinical features can provide significant information to predict the prognosis of patients with advanced ovarian cancer treated with debulking surgery and platinum-based chemotherapy. On the basis of our data a tentative proposal for future therapeutic approaches is made.

  19. Factors associated with early adoption of the HPV vaccine in US male adolescents include Hispanic ethnicity and receipt of other vaccines.

    PubMed

    Kepka, Deanna; Ding, Qian; Hawkins, Amy J; Warner, Echo L; Boucher, Kenneth M

    2016-12-01

    Adolescent males' HPV vaccine initiation and completion in the United States is far below the Healthy People 2020 goal of 80% 3-dose completion among boys. In 2012, less than 7% of males ages 13-17 years had completed the 3-dose series. The Diffusion of Innovations framework guided this investigation of factors related to early adoption of HPV vaccination among male adolescents. Provider-validated data from the 2012 National Immunization Survey-Teen (NIS-Teen) for male adolescents ages 13-17 years were analyzed via a multivariable Poisson regression to estimate prevalence ratios for factors associated with HPV vaccine initiation and completion. Adolescent males who are Hispanic and those who are up to date on other recommended adolescent vaccinations were most likely to complete the HPV vaccine. Public health interventions are needed to improve low HPV vaccination rates among adolescent males in the United States. Description of early adopters of the HPV vaccine provides historical context of HPV vaccination acceptance that is needed to inform the design of targeted vaccination interventions to prevent negative HPV-associated outcomes.

  20. Factors associated with early adoption of the HPV vaccine in US male adolescents include Hispanic ethnicity and receipt of other vaccines.

    PubMed

    Kepka, Deanna; Ding, Qian; Hawkins, Amy J; Warner, Echo L; Boucher, Kenneth M

    2016-12-01

    Adolescent males' HPV vaccine initiation and completion in the United States is far below the Healthy People 2020 goal of 80% 3-dose completion among boys. In 2012, less than 7% of males ages 13-17 years had completed the 3-dose series. The Diffusion of Innovations framework guided this investigation of factors related to early adoption of HPV vaccination among male adolescents. Provider-validated data from the 2012 National Immunization Survey-Teen (NIS-Teen) for male adolescents ages 13-17 years were analyzed via a multivariable Poisson regression to estimate prevalence ratios for factors associated with HPV vaccine initiation and completion. Adolescent males who are Hispanic and those who are up to date on other recommended adolescent vaccinations were most likely to complete the HPV vaccine. Public health interventions are needed to improve low HPV vaccination rates among adolescent males in the United States. Description of early adopters of the HPV vaccine provides historical context of HPV vaccination acceptance that is needed to inform the design of targeted vaccination interventions to prevent negative HPV-associated outcomes. PMID:27413668

  1. Transcriptional Regulation of Zein Gene Expression in Maize through the Additive and Synergistic Action of opaque2, Prolamine-Box Binding Factor, and O2 Heterodimerizing Proteins

    PubMed Central

    Zhang, Zhiyong; Yang, Jun; Wu, Yongrui

    2015-01-01

    Maize (Zea mays) zeins are some of the most abundant cereal seed storage proteins (SSPs). Their abundance influences kernel hardness but compromises its nutritional quality. Transcription factors regulating the expression of zein and other SSP genes in cereals are endosperm-specific and homologs of maize opaque2 (O2) and prolamine-box binding factor (PBF). This study demonstrates that the ubiquitously expressed transcription factors, O2 heterodimerizing proteins (OHPs), specifically regulate 27-kD γ-zein gene expression (through binding to an O2-like box in its promoter) and interact with PBF. The zein content of double mutants OhpRNAi;o2 and PbfRNAi;o2 and the triple mutant PbfRNAi;OhpRNAi;o2 is reduced by 83, 89, and 90%, respectively, compared with the wild type. The triple mutant developed the smallest zein protein bodies, which were merely one-tenth the wild type’s size. Total protein levels in these mutants were maintained in a relatively constant range through proteome rebalancing. These data show that OHPs, O2, and PBF are master regulators of zein storage protein synthesis, acting in an additive and synergistic mode. The differential expression patterns of OHP and O2 genes may cause the slight differences in the timing of 27-kD γ-zein and 22-kD α-zein accumulation during protein body formation. PMID:25901087

  2. An Analysis of Factor Extraction Strategies: A Comparison of the Relative Strengths of Principal Axis, Ordinary Least Squares, and Maximum Likelihood in Research Contexts That Include Both Categorical and Continuous Variables

    ERIC Educational Resources Information Center

    Coughlin, Kevin B.

    2013-01-01

    This study is intended to provide researchers with empirically derived guidelines for conducting factor analytic studies in research contexts that include dichotomous and continuous levels of measurement. This study is based on the hypotheses that ordinary least squares (OLS) factor analysis will yield more accurate parameter estimates than…

  3. Response to Therapy and Outcomes in Oropharyngeal Cancer Are Associated With Biomarkers Including Human Papillomavirus, Epidermal Growth Factor Receptor, Gender, and Smoking

    SciTech Connect

    Kumar, Bhavna; Cordell, Kitrina G.; Lee, Julia S.; Prince, Mark E.; Tran, Huong H.; Wolf, Gregory T.; Urba, Susan G.; Worden, Francis P.; Chepeha, Douglas B.; Teknos, Theodoros N.; Eisbruch, Avraham; Tsien, Christina I.; Taylor, Jeremy; D'Silva, Nisha J.; Yang, Kun; Kurnit, David M.; Bradford, Carol R.

    2007-10-01

    Induction chemotherapy and concurrent chemoradiation for responders or immediate surgery for non-responders is an effective treatment strategy head and neck squamous cell carcinoma (HNSCC) of the larynx and oropharynx. Biomarkers that predict outcome would be valuable in selecting patients for therapy. In this study, the presence and titer of high risk human papilloma virus (HPV) and expression of epidermal growth factor receptor (EGFR) in pre-treatment biopsies, as well as smoking and gender were examined in oropharynx cancer patients enrolled in an organ sparing trial. HPV16 copy number was positively associated with response to therapy and with overall and disease specific survival, whereas EGFR expression, current or former smoking behavior, and female gender (in this cohort) were associated with poor response and poor survival in multivariate analysis. Smoking cessation and strategies to target EGFR may be useful adjuncts for therapy to improve outcome in the cases with the poorest biomarker profile.

  4. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  5. Modifiable risk factors including sunlight exposure and fish consumption are associated with risk of hypertension in a large representative population from Macau.

    PubMed

    Ke, Liang; Ho, Jacky; Feng, Jianzhang; Mpofu, Elias; Dibley, Michael J; Feng, Xiuhua; Van, Florance; Leong, Sokman; Lau, Winne; Lueng, Petra; Kowk, Carrie; Li, Yan; Mason, Rebecca S; Brock, Kaye E

    2014-10-01

    Chinese populations are known to be at risk for vitamin D deficiency, with some evidence that this is due to lack of exposure to sunlight. Vitamin D deficiency and/or low sun exposure have been associated with higher incidence of hypertension in Caucasians. Thus, we investigated these associations in a Chinese population with a high rate of hypertension. From a random household survey of 1410 residents aged ≥18 years, height, weight and blood pressure were measured and demographic, exercise and dietary data were collected, as well as estimated hours of sunlight exposure on weekdays and weekends (in winter and summer). Modifiable predictors of hypertension in these data were lack of sunlight exposure and low intake of fish as well as smoking, obesity and lack of exercise. When investigated in a linear model, sunlight exposure was negatively associated with hypertension (β=-0.072, p<0.001) as was physical activity (β=-0.021, p<0.001) and fish consumption (β=-0.177, p<0.001). In contrast body mass index (weight/height(2)) was positively associated with hypertension (β=+0.62, p<0.001), as were pack-years of smoking (β=+0.27, p<0.001). On multivariate categorical analysis taking into account demographic risk factors in these data (age, gender and occupation) having more than half an hour's sun exposure per day compared to none was associated with less hypertension (OR=0.6, 95% CI: 0.4-0.8). Similarly, consuming either oily fish or seafood more than four times per week compared to less was also associated with less hypertension (oily fish (OR=0.4, 95% CI: 0.3-0.5); seafood consumption (OR=0.8, 95% CI: 0.7-0.9)). Having daily moderate physical activity compared to none was also associated with a lower risk of hypertension (OR=0.8, 95% CI: 0.7-0.9). In contrast, being obese compared to normal weight and having more than five pack-years of smoking compared to none were associated with a higher risk of hypertension (OR=4.6, 95% CI: 3.7-5.7; OR=1.4, 95% CI: 1

  6. The significance of relative dose intensity in adjuvant chemotherapy of pancreatic ductal adenocarcinoma-including the analysis of clinicopathological factors influencing relative dose intensity.

    PubMed

    Yabusaki, Norimitsu; Fujii, Tsutomu; Yamada, Suguru; Murotani, Kenta; Sugimoto, Hiroyuki; Kanda, Mitsuro; Nakayama, Goro; Koike, Masahiko; Fujiwara, Michitaka; Kodera, Yasuhiro

    2016-07-01

    Recently, it has been reported that the relative dose intensity (RDI) of adjuvant chemotherapy (AC) influences survival in various cancers, but there are very few reports about RDI in pancreatic ductal adenocarcinoma (PDAC). The optimal timing for initiation of AC for PDAC also remains unknown. The aim of this study was to identify the significance of RDI and the time interval between surgery and initiation of AC on survival of patients with PDAC. Clinicopathological factors that affect RDI were also investigated.A total of 311 consecutive PDAC patients who underwent curative resection between May 2005 and January 2015 were enrolled. Patients who underwent neoadjuvant chemoradiation, had UICC stage IV disease, or had early recurrences within 6 months were excluded, and the remaining 168 cases were analyzed.Patients with RDIs ≥80% (n = 79) showed significantly better overall survival (OS) compared to patients with RDIs <80% (n = 55) (median survival time (MST): 45.6 months, 26.0 months, P < 0.001). Patients with no AC (n = 34) showed the worst OS (MST: 20.8 months). Whether the AC was initiated earlier or later than 8 weeks after surgery did not influence survival, either in patients with RDIs ≥80% (P = 0.79) or in those with <80% (P = 0.73). Patients in the S-1 monotherapy group (n = 49) showed significantly better OS than patients in the gemcitabine monotherapy group (n = 51) (MST: 95.0 months, 26.0 months, respectively; P = 0.001). Univariate analysis conducted after adjusting for the chemotherapeutic drug used identified several prognostic factors; male gender (P = 0.01), intraoperative blood transfusion (P = 0.005), lymph node metastasis (P = 0.03), and postoperative WBC count (P = 0.03). Multivariate analysis identified intra-plus postoperative blood transfusion (P = 0.002) and high postoperative platelet-to-lymphocyte ratios (PLR) (P = 0.04) as independent predictors of poor RDI.Efforts to

  7. Modifiable risk factors including sunlight exposure and fish consumption are associated with risk of hypertension in a large representative population from Macau.

    PubMed

    Ke, Liang; Ho, Jacky; Feng, Jianzhang; Mpofu, Elias; Dibley, Michael J; Feng, Xiuhua; Van, Florance; Leong, Sokman; Lau, Winne; Lueng, Petra; Kowk, Carrie; Li, Yan; Mason, Rebecca S; Brock, Kaye E

    2014-10-01

    Chinese populations are known to be at risk for vitamin D deficiency, with some evidence that this is due to lack of exposure to sunlight. Vitamin D deficiency and/or low sun exposure have been associated with higher incidence of hypertension in Caucasians. Thus, we investigated these associations in a Chinese population with a high rate of hypertension. From a random household survey of 1410 residents aged ≥18 years, height, weight and blood pressure were measured and demographic, exercise and dietary data were collected, as well as estimated hours of sunlight exposure on weekdays and weekends (in winter and summer). Modifiable predictors of hypertension in these data were lack of sunlight exposure and low intake of fish as well as smoking, obesity and lack of exercise. When investigated in a linear model, sunlight exposure was negatively associated with hypertension (β=-0.072, p<0.001) as was physical activity (β=-0.021, p<0.001) and fish consumption (β=-0.177, p<0.001). In contrast body mass index (weight/height(2)) was positively associated with hypertension (β=+0.62, p<0.001), as were pack-years of smoking (β=+0.27, p<0.001). On multivariate categorical analysis taking into account demographic risk factors in these data (age, gender and occupation) having more than half an hour's sun exposure per day compared to none was associated with less hypertension (OR=0.6, 95% CI: 0.4-0.8). Similarly, consuming either oily fish or seafood more than four times per week compared to less was also associated with less hypertension (oily fish (OR=0.4, 95% CI: 0.3-0.5); seafood consumption (OR=0.8, 95% CI: 0.7-0.9)). Having daily moderate physical activity compared to none was also associated with a lower risk of hypertension (OR=0.8, 95% CI: 0.7-0.9). In contrast, being obese compared to normal weight and having more than five pack-years of smoking compared to none were associated with a higher risk of hypertension (OR=4.6, 95% CI: 3.7-5.7; OR=1.4, 95% CI: 1

  8. Relationship between indices of iron status and coronary risk factors including diabetes and the metabolic syndrome in Saudi subjects without overt coronary disease.

    PubMed

    Alissa, Eman M; Ahmed, Waqar H; Al-Ama, Nabeel; Ferns, Gordon A A

    2007-01-01

    There have been inconsistent reports on the relationship between iron status and coronary artery diseases (CAD), and little data on this relationship in non-Caucasian populations. We assessed dietary iron by questionnaire and measured serum iron and ferritin levels in 270 Saudi male subjects without established CAD, 130 of whom were angiogram negative. Serum lipid profile, glucose, high sensitivity-C reactive protein (hs-CRP), serum soluble intercellular adhesion molecules-1 (sICAM-1), and caeruloplasmin were measured in all subjects. The angiogram negative patients, had lower serum ferritin (p<0.05) and iron (p<0.0001) levels than the 140 subjects without reported cardiovascular diseases (CVD). Serum iron correlated with serum triglycerides (p<0.0001) and total cholesterol (p<0.05) levels for this latter group and the groups combined. Serum ferritin correlated with serum total cholesterol and low-density lipoprotein (LDL)-cholesterol in the combined group (p<0.05), and was correlated with blood glucose and serum LDL-cholesterol (p<0.05) in the subjects without reported CVD. After adjustment for confounding variables, serum iron levels remained a significant correlate with total calorie intake and serum triglycerides. Serum ferritin also correlated significantly with cholesterol intake and fasting serum total cholesterol. Dietary iron was significantly related to dietary cholesterol and fiber, age, smoking habits, and serum total cholesterol level. Hence, indices of iron status were related to several coronary risk factors in the Saudi population.

  9. Multiple roles of cord factor in the pathogenesis of primary, secondary, and cavitary tuberculosis, including a revised description of the pathology of secondary disease.

    PubMed

    Hunter, Robert L; Olsen, Margaret R; Jagannath, Chinnaswamy; Actor, Jeffrey K

    2006-01-01

    Tuberculosis, once thought to have been controlled, is now resurgent in many parts of the world. Many gaps exist in understanding the pathogenesis of tuberculosis, especially secondary and cavitary disease. Evidence presented here suggests that cord factor (trehalose 6,6'-dimycolate, TDM) is a key driver of these processes. It is the most abundant lipid released by virulent M. tuberculosis (MTB) and can switch between two sets of activities. On organisms, TDM is non-toxic and protects them from killing by macrophages. On lipid surfaces, it becomes antigenic and highly toxic. Caseating granulomas, the hallmark of primary tuberculosis, develop from interaction of TDM with lipid within granulomas. New evidence indicates that secondary tuberculosis begins as a lipid pneumonia that accumulates mycobacterial antigens and host lipids in alveoli before developing conditions for activation of the toxicity and antigenicity of TDM. This rapidly produces caseation necrosis that leads to cavities. Finally, virulent MTB release large amounts of TDM during growth as a pellicle within cavities. We propose that such growth results in activation of the toxicity and antigenicity of TDM at the air interface and that presence of the activated TDM perpetuates the cavity. PMID:17127724

  10. Kynurenine Pathway Pathologies: do Nicotinamide and Other Pathway Co-Factors have a Therapeutic Role in Reduction of Symptom Severity, Including Chronic Fatigue Syndrome (CFS) and Fibromyalgia (FM)

    PubMed Central

    Blankfield, Adele

    2013-01-01

    The definition of dual tryptophan pathways has increased the understanding of the mind-body, body-mind dichotomy. The serotonergic pathway highlights the primary (endogenous) psychiatric disorders. The up-regulation of the kynurenine pathway by physical illnesses can cause neuropathic and immunological disorders1 associated with secondary neuropsychiatric symptoms. Tryptophan and nicotinamide deficiencies fall within the protein energy malnutrition (PEM) spectrum. They can arise if the kynurenine pathway is stressed by primary or secondary inflammatory conditions and the consequent imbalance of available catabolic/anabolic substrates may adversely influence convalescent phase efficiency. The replacement of depleted or reduced NAD+ levels and other cofactors can perhaps improve the clinical management of these disorders. Chronic fatigue syndrome (CFS) and fibromyalgia (FM) appear to meet the criteria of a tryptophan-kynurenine pathway disorder with potential neuroimmunological sequelae. Aspects of some of the putative precipitating factors have been previously outlined.2,3 An analysis of the areas of metabolic dysfunction will focus on future directions for research and management. PMID:23922501

  11. Translationally Invariant Calculations of Form Factors, Densities and Momentum Distributions for Finite Nuclei with Short-Range Correlations Included: A Fresh Look

    NASA Astrophysics Data System (ADS)

    Shebeko, A.; Grigorov, P.; Iurasov, V.

    2014-08-01

    The approach proposed in the 70s (Dementiji et al. in Sov J Nucl Phys 22:6-9, 1976), when describing the elastic and inelastic electron scattering off 4 He, and elaborated in (Shebeko et al.in Eur Phys J A27:143-155, 2006) for calculations of the one-body, two-body and more complex density matrices of finite bound systems has been applied (Shebeko and Grigorov in Ukr J Phys 52:830-842, 2007; Shebeko et al. in Eur. Phys. J. A48:153-172, 2012) in studying a combined effect of the center-of-mass motion and nucleon-nucleon short-range correlations on the nucleon density and momentum distributions in light nuclei beyond the independent particle model. Unlike a common practice, suitable for infinite bound systems, these distributions are determined as expectation values of appropriate intrinsic operators that depend upon the relative coordinates and momenta (Jacobi variables) and act on the intrinsic ground-state wave functions (WFs). The latter are constructed in the so-called fixed center-of-mass approximation, starting with a mean-field Slater determinant modified by some correlator (e.g., after Jastrow or Villars). Our numerical calculations of the charge form factors ( F CH ( q)), densities and momentum distributions have been carried out for nuclei 4 He and 16 O choosing, respectively, the 1 s and 1 s-1 p Slater determinants of the harmonic oscillator model as trial, nontranslationally invariant WFs.

  12. The mRNA decay factor PAT1 functions in a pathway including MAP kinase 4 and immune receptor SUMM2

    PubMed Central

    Roux, Milena Edna; Rasmussen, Magnus Wohlfahrt; Palma, Kristoffer; Lolle, Signe; Regué, Àngels Mateu; Bethke, Gerit; Glazebrook, Jane; Zhang, Weiping; Sieburth, Leslie; Larsen, Martin R; Mundy, John; Petersen, Morten

    2015-01-01

    Multi-layered defense responses are activated in plants upon recognition of invading pathogens. Transmembrane receptors recognize conserved pathogen-associated molecular patterns (PAMPs) and activate MAP kinase cascades, which regulate changes in gene expression to produce appropriate immune responses. For example, Arabidopsis MAP kinase 4 (MPK4) regulates the expression of a subset of defense genes via at least one WRKY transcription factor. We report here that MPK4 is found in complexes in vivo with PAT1, a component of the mRNA decapping machinery. PAT1 is also phosphorylated by MPK4 and, upon flagellin PAMP treatment, PAT1 accumulates and localizes to cytoplasmic processing (P) bodies which are sites for mRNA decay. Pat1 mutants exhibit dwarfism and de-repressed immunity dependent on the immune receptor SUMM2. Since mRNA decapping is a critical step in mRNA turnover, linking MPK4 to mRNA decay via PAT1 provides another mechanism by which MPK4 may rapidly instigate immune responses. PMID:25603932

  13. Multi-Faceted Proteomic Characterization of Host Protein Complement of Rift Valley Fever Virus Virions and Identification of Specific Heat Shock Proteins, Including HSP90, as Important Viral Host Factors

    PubMed Central

    Nuss, Jonathan E.; Kehn-Hall, Kylene; Benedict, Ashwini; Costantino, Julie; Ward, Michael; Peyser, Brian D.; Retterer, Cary J.; Tressler, Lyal E.; Wanner, Laura M.; McGovern, Hugh F.; Zaidi, Anum; Anthony, Scott M.; Kota, Krishna P.; Bavari, Sina; Hakami, Ramin M.

    2014-01-01

    Rift Valley fever is a potentially fatal disease of humans and domestic animals caused by Rift Valley fever virus (RVFV). Infection with RVFV in ruminants can cause near 100% abortion rates and recent outbreaks in naïve human populations have suggested case fatality rates of greater than thirty percent. To elucidate the roles that host proteins play during RVFV infection, proteomic analysis of RVFV virions was conducted using complementary analytical approaches, followed by functional validation studies of select identified host factors. Coupling the more traditional Gel LC/MS/MS approach (SDS PAGE followed by liquid chromatography tandem mass spectrometry) with an alternative technique that preserves protein complexes allowed the protein complement of these viral particles to be thoroughly examined. In addition to viral proteins present within the virions and virion-associated host proteins, multiple macromolecular complexes were identified. Bioinformatic analysis showed that host chaperones were among over-represented protein families associated with virions, and functional experiments using siRNA gene silencing and small molecule inhibitors identified several of these heat shock proteins, including heat shock protein 90 (HSP90), as important viral host factors. Further analysis indicated that HSP inhibition effects occur during the replication/transcription phase of the virus life cycle, leading to significant lowering of viral titers without compromising the functional capacity of released virions. Overall, these studies provide much needed further insight into interactions between RVFV and host cells, increasing our understanding of the infection process and suggesting novel strategies for anti-viral development. In particular, considering that several HSP90 inhibitors have been advancing through clinical trials for cancer treatment, these results also highlight the exciting potential of repurposing HSP90 inhibitors to treat RVF. PMID:24809507

  14. Multi-faceted proteomic characterization of host protein complement of Rift Valley fever virus virions and identification of specific heat shock proteins, including HSP90, as important viral host factors.

    PubMed

    Nuss, Jonathan E; Kehn-Hall, Kylene; Benedict, Ashwini; Costantino, Julie; Ward, Michael; Peyser, Brian D; Retterer, Cary J; Tressler, Lyal E; Wanner, Laura M; McGovern, Hugh F; Zaidi, Anum; Anthony, Scott M; Kota, Krishna P; Bavari, Sina; Hakami, Ramin M

    2014-01-01

    Rift Valley fever is a potentially fatal disease of humans and domestic animals caused by Rift Valley fever virus (RVFV). Infection with RVFV in ruminants can cause near 100% abortion rates and recent outbreaks in naïve human populations have suggested case fatality rates of greater than thirty percent. To elucidate the roles that host proteins play during RVFV infection, proteomic analysis of RVFV virions was conducted using complementary analytical approaches, followed by functional validation studies of select identified host factors. Coupling the more traditional Gel LC/MS/MS approach (SDS PAGE followed by liquid chromatography tandem mass spectrometry) with an alternative technique that preserves protein complexes allowed the protein complement of these viral particles to be thoroughly examined. In addition to viral proteins present within the virions and virion-associated host proteins, multiple macromolecular complexes were identified. Bioinformatic analysis showed that host chaperones were among over-represented protein families associated with virions, and functional experiments using siRNA gene silencing and small molecule inhibitors identified several of these heat shock proteins, including heat shock protein 90 (HSP90), as important viral host factors. Further analysis indicated that HSP inhibition effects occur during the replication/transcription phase of the virus life cycle, leading to significant lowering of viral titers without compromising the functional capacity of released virions. Overall, these studies provide much needed further insight into interactions between RVFV and host cells, increasing our understanding of the infection process and suggesting novel strategies for anti-viral development. In particular, considering that several HSP90 inhibitors have been advancing through clinical trials for cancer treatment, these results also highlight the exciting potential of repurposing HSP90 inhibitors to treat RVF.

  15. Heterogeneity in Pseudomonas aeruginosa Biofilms Includes Expression of Ribosome Hibernation Factors in the Antibiotic-Tolerant Subpopulation and Hypoxia-Induced Stress Response in the Metabolically Active Population

    PubMed Central

    Williamson, Kerry S.; Richards, Lee A.; Perez-Osorio, Ailyn C.; Pitts, Betsey; McInnerney, Kathleen; Stewart, Philip S.

    2012-01-01

    Bacteria growing in biofilms are physiologically heterogeneous, due in part to their adaptation to local environmental conditions. Here, we characterized the local transcriptome responses of Pseudomonas aeruginosa growing in biofilms by using a microarray analysis of isolated biofilm subpopulations. The results demonstrated that cells at the top of the biofilms had high mRNA abundances for genes involved in general metabolic functions, while mRNA levels for these housekeeping genes were low in cells at the bottom of the biofilms. Selective green fluorescent protein (GFP) labeling showed that cells at the top of the biofilm were actively dividing. However, the dividing cells had high mRNA levels for genes regulated by the hypoxia-induced regulator Anr. Slow-growing cells deep in the biofilms had little expression of Anr-regulated genes and may have experienced long-term anoxia. Transcripts for ribosomal proteins were associated primarily with the metabolically active cell fraction, while ribosomal RNAs were abundant throughout the biofilms, indicating that ribosomes are stably maintained even in slowly growing cells. Consistent with these results was the identification of mRNAs for ribosome hibernation factors (the rmf and PA4463 genes) at the bottom of the biofilms. The dormant biofilm cells of a P. aeruginosa Δrmf strain had decreased membrane integrity, as shown by propidium iodide staining. Using selective GFP labeling and cell sorting, we show that the dividing cells are more susceptible to killing by tobramycin and ciprofloxacin. The results demonstrate that in thick P. aeruginosa biofilms, cells are physiologically distinct spatially, with cells deep in the biofilm in a viable but antibiotic-tolerant slow-growth state. PMID:22343293

  16. Acetylated Histone H3K9 is associated with meiotic recombination hotspots, and plays a role in recombination redundantly with other factors including the H3K4 methylase Set1 in fission yeast

    PubMed Central

    Yamada, Shintaro; Ohta, Kunihiro; Yamada, Takatomi

    2013-01-01

    Histone modifications are associated with meiotic recombination hotspots, discrete sites with augmented recombination frequency. For example, trimethylation of histone H3 lysine4 (H3K4me3) marks most hotspots in budding yeast and mouse. Modified histones are known to regulate meiotic recombination partly by promoting DNA double-strand break (DSB) formation at hotspots, but the role and precise landscape of involved modifications remain unclear. Here, we studied hotspot-associated modifications in fission yeast and found general features: acetylation of H3 lysine9 (H3K9ac) is elevated, and H3K4me3 is not significantly enriched. Mutating H3K9 to non-acetylatable alanine mildly reduced levels of the DSB-inducing protein Rec12 (the fission yeast homologue of Spo11) and DSB at hotspots, indicating that H3K9ac may be involved in DSB formation by enhancing the interaction between Rec12 and hotspots. In addition, we found that the lack of the H3K4 methyltransferase Set1 generally increased Rec12 binding to chromatin but partially reduced DSB formation at some loci, suggesting that Set1 is also involved in DSB formation. These results suggest that meiotic DSB formation is redundantly regulated by multiple chromatin-related factors including H3K9ac and Set1 in fission yeast. PMID:23382177

  17. Relations of body habitus, fitness level, and cardiovascular risk factors including lipoproteins and apolipoproteins in a rural and urban Costa Rican population.

    PubMed

    Campos, H; Bailey, S M; Gussak, L S; Siles, X; Ordovas, J M; Schaefer, E J

    1991-01-01

    .0001). Our data indicate that general and abdominal obesity, increased cigarette smoking, diastolic blood pressure, and decreased fitness level are more prevalent in an urban than in a rural area in Costa Rica, particularly in men. The higher prevalence of such risk factors in the urban area is associated with a more atherogenic plasma lipoprotein profile.

  18. Stretching human mesenchymal stromal cells on stiffness-customized collagen type I generates a smooth muscle marker profile without growth factor addition

    PubMed Central

    Rothdiener, Miriam; Hegemann, Miriam; Uynuk-Ool, Tatiana; Walters, Brandan; Papugy, Piruntha; Nguyen, Phong; Claus, Valentin; Seeger, Tanja; Stoeckle, Ulrich; Boehme, Karen A.; Aicher, Wilhelm K.; Stegemann, Jan P.; Hart, Melanie L.; Kurz, Bodo; Klein, Gerd; Rolauffs, Bernd

    2016-01-01

    Using matrix elasticity and cyclic stretch have been investigated for inducing mesenchymal stromal cell (MSC) differentiation towards the smooth muscle cell (SMC) lineage but not in combination. We hypothesized that combining lineage-specific stiffness with cyclic stretch would result in a significantly increased expression of SMC markers, compared to non-stretched controls. First, we generated dense collagen type I sheets by mechanically compressing collagen hydrogels. Atomic force microscopy revealed a nanoscale stiffness range known to support myogenic differentiation. Further characterization revealed viscoelasticity and stable biomechanical properties under cyclic stretch with >99% viable adherent human MSC. MSCs on collagen sheets demonstrated a significantly increased mRNA but not protein expression of SMC markers, compared to on culture flasks. However, cyclic stretch of MSCs on collagen sheets significantly increased both mRNA and protein expression of α-smooth muscle actin, transgelin, and calponin versus plastic and non-stretched sheets. Thus, lineage-specific stiffness and cyclic stretch can be applied together for inducing MSC differentiation towards SMCs without the addition of recombinant growth factors or other soluble factors. This represents a novel stimulation method for modulating the phenotype of MSCs towards SMCs that could easily be incorporated into currently available methodologies to obtain a more targeted control of MSC phenotype. PMID:27775041

  19. Short-term salivary acetaldehyde increase due to direct exposure to alcoholic beverages as an additional cancer risk factor beyond ethanol metabolism

    PubMed Central

    2011-01-01

    Background An increasing body of evidence now implicates acetaldehyde as a major underlying factor for the carcinogenicity of alcoholic beverages and especially for oesophageal and oral cancer. Acetaldehyde associated with alcohol consumption is regarded as 'carcinogenic to humans' (IARC Group 1), with sufficient evidence available for the oesophagus, head and neck as sites of carcinogenicity. At present, research into the mechanistic aspects of acetaldehyde-related oral cancer has been focused on salivary acetaldehyde that is formed either from ethanol metabolism in the epithelia or from microbial oxidation of ethanol by the oral microflora. This study was conducted to evaluate the role of the acetaldehyde that is found as a component of alcoholic beverages as an additional factor in the aetiology of oral cancer. Methods Salivary acetaldehyde levels were determined in the context of sensory analysis of different alcoholic beverages (beer, cider, wine, sherry, vodka, calvados, grape marc spirit, tequila, cherry spirit), without swallowing, to exclude systemic ethanol metabolism. Results The rinsing of the mouth for 30 seconds with an alcoholic beverage is able to increase salivary acetaldehyde above levels previously judged to be carcinogenic in vitro, with levels up to 1000 μM in cases of beverages with extreme acetaldehyde content. In general, the highest salivary acetaldehyde concentration was found in all cases in the saliva 30 sec after using the beverages (average 353 μM). The average concentration then decreased at the 2-min (156 μM), 5-min (76 μM) and 10-min (40 μM) sampling points. The salivary acetaldehyde concentration depends primarily on the direct ingestion of acetaldehyde contained in the beverages at the 30-sec sampling, while the influence of the metabolic formation from ethanol becomes the major factor at the 2-min sampling point. Conclusions This study offers a plausible mechanism to explain the increased risk for oral cancer associated with

  20. Changes in diet, cardiovascular risk factors and modelled cardiovascular risk following diagnosis of diabetes: 1-year results from the ADDITION-Cambridge trial cohort

    PubMed Central

    Savory, L A; Griffin, S J; Williams, K M; Prevost, A T; Kinmonth, A-L; Wareham, N J; Simmons, R K

    2014-01-01

    Aims To describe change in self-reported diet and plasma vitamin C, and to examine associations between change in diet and cardiovascular disease risk factors and modelled 10-year cardiovascular disease risk in the year following diagnosis of Type 2 diabetes. Methods Eight hundred and sixty-seven individuals with screen-detected diabetes underwent assessment of self-reported diet, plasma vitamin C, cardiovascular disease risk factors and modelled cardiovascular disease risk at baseline and 1 year (n = 736) in the ADDITION-Cambridge trial. Multivariable linear regression was used to quantify the association between change in diet and cardiovascular disease risk at 1 year, adjusting for change in physical activity and cardio-protective medication. Results Participants reported significant reductions in energy, fat and sodium intake, and increases in fruit, vegetable and fibre intake over 1 year. The reduction in energy was equivalent to an average-sized chocolate bar; the increase in fruit was equal to one plum per day. There was a small increase in plasma vitamin C levels. Increases in fruit intake and plasma vitamin C were associated with small reductions in anthropometric and metabolic risk factors. Increased vegetable intake was associated with an increase in BMI and waist circumference. Reductions in fat, energy and sodium intake were associated with reduction in HbA1c, waist circumference and total cholesterol/modelled cardiovascular disease risk, respectively. Conclusions Improvements in dietary behaviour in this screen-detected population were associated with small reductions in cardiovascular disease risk, independently of change in cardio-protective medication and physical activity. Dietary change may have a role to play in the reduction of cardiovascular disease risk following diagnosis of diabetes. PMID:24102972

  1. A comparison of cardiovascular risk as measured by compound blood lipid indices and two indices including lifestyle factors in occupational health service.

    PubMed

    Berg, J E

    1996-08-01

    Healthy employees in a non-manufacturing firm (n = 252) were divided into low and high cardiovascular risk subjects in order to compare different indices of cardiovascular risk for use in occupational health service. The levels of total cholesterol (TC), a compound index of blood lipid components, the 'atherogenic index' (ATH-index) defined as ([TC-HDLc] x [apoB])/([HDLc] x [apoA]), and two other compound indices, one Norwegian (Westlund) and one Scottish (Dundee score) were compared. Information on smoking habits and blood pressure were part of the two last indices. Cut-off values to separate between low and high risk subjects were defined with TC = 6.5 mmol/l, HDLc = 0.9 mmol/l, apoA = 1.8 g/l and apoB = 1.3 g/l, all values based on clinical guidelines in Norway. No smoking and a systolic blood pressure < 150 mmHg was included as cut-off of the combined indices. According to the three indices (ATH, Westlund and Dundee) 102, 25 and 116 employees were allocated to the increased risk group. Persons allocated to the increased risk group by the combined indices and not by the compound index were practically all smokers. Systolic blood pressure differed between indices only for persons with extreme pressures. A compound blood lipid index of CV risk, which may be drawn easily in an occupational health setting in an unfasting state and sent by post to a laboratory, mimics the allocation of persons to an increased risk group using combined indices. Smokers with normal lipid values would be allocated to increased risk by the combined indices, but not necessarily by the compound index. The use of the compound index together with advice to stop smoking is suggested as a time-saving strategy.

  2. Fat and starch as additive risk factors for milk fat depression in dairy diets containing corn dried distillers grains with solubles.

    PubMed

    Ramirez Ramirez, H A; Castillo Lopez, E; Harvatine, K J; Kononoff, P J

    2015-03-01

    Two experiments were conducted to evaluate the additive effects of starch and fat as risk factors associated with milk fat depression in dairy diets containing corn dried distillers grains with solubles. In experiment 1, 4 multiparous ruminally cannulated Holstein cows, averaging 114±14 d in milk and 662±52 kg of body weight, were randomly assigned to 4 treatments in a 4×4 Latin square to determine the effect of these risk factors on rumen fermentation and milk fatty acid profile. In each 21-d period, cows were assigned to 1 of 4 dietary treatments: a control diet (CON; ether extract 5.2%, starch 19%); CON with added oil (OL; ether extract 6.4%, starch 18%); CON with added starch (STR; ether extract 5.5%, starch 22%); and CON with added oil and starch (COMBO; ether extract 6.5%, starch 23%). After completion of experiment 1, milk production response was evaluated in a second experiment with a similar approach to diet formulation. Twenty Holstein cows, 12 primiparous and 8 multiparous, averaging 117±17 d in milk and 641±82 kg, were used in replicated 4×4 Latin squares with 21-d periods. Results from experiment 1 showed that ruminal pH was not affected by treatment averaging 5.87±0.08. Molar proportion of propionate in rumen fluid was greatest on the COMBO diet, followed by OL and STR, and lowest for CON. The concentration of trans-10,cis-12 conjugated linoleic acid in milk fat increased with the COMBO diet. Adding oil, starch, or a combination of both resulted in lower concentration and yield of fatty acids<16 carbons. Compared with the control, OL and STR resulted in 13% lower concentration, whereas the COMBO diet resulted in a 27% reduction; similarly yield was reduced by 24% with the OL and STR treatments and 54% with the COMBO diet. In experiment 2, milk yield, milk protein percentage, and milk protein yield were similar across treatments, averaging 26.6±1.01 kg/d, 3.2±0.05%, and 0.84±0.03 kg/d, respectively. Fat-corrected milk was greatest for CON, 26

  3. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  4. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  5. 34 CFR 303.15 - Include; including.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include; including. 303.15 Section 303.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  6. Insulin-like growth factor I induces proliferation and migration of porcine trophectoderm cells through multiple cell signaling pathways, including protooncogenic protein kinase 1 and mitogen-activated protein kinase.

    PubMed

    Jeong, Wooyoung; Song, Gwonhwa; Bazer, Fuller W; Kim, Jinyoung

    2014-03-25

    During early pregnancy, the developing conceptus is dependent upon a wide range of growth factors and nutrients that are secreted by or transported by uterine epithelia into the uterus at the maternal-conceptus interface for successful implantation and placentation. Among these factors, insulin-like growth factor-I (IGF-I) is known to play an important role in development of the early embryo and uterine endometrium. However, few studies have been conducted with pigs to determine IGF-I-induced functional effects on peri-implantation embryos such as activation of cell signaling cascades responsible for growth, proliferation and differentiation of cells of the conceptus. Therefore, the aim of this study was to analyze mRNA expression of endometrial IGF-I and its receptor, to examine the functional role of IGF-I on primary porcine trophectoderm (pTr) cells and to assess potential signaling pathways responsible for biological activities of IGF-1. In the present study, expression of endometrial type I IGF receptor (IGF-IR) mRNA increased significantly from Day 10 to Day 12 of pregnancy and the increase was greater for pregnant than cyclic gilts. Both IGF-I and IGF-IR mRNAs were abundant in endometrial luminal-, glandular epithelia, and stratum compactum stroma on Day 12 of pregnancy. In addition, IGF-I significantly induced phosphorylation of AKT1, ERK1/2 and RPS6 in a time- and concentration-dependent manner in pTr cells. Immunofluorescence microscopy revealed that IGF-I treated pTr cells exhibited increased abundance of phosphorylated (p)-AKT1 and p-ERK1/2 MAPK proteins in the nucleus and cytoplasm, and p-RPS6 proteins in the cytosol as compared to non-treated pTr cells. In the presence of the ERK1/2 MAPK inhibitor (U0126), IGF-I-induced AKT1 phosphorylation was not affected, whereas the PI3K inhibitor (LY294002) decreased IGF-I-induced phosphorylation of ERK1/2 and AKT1 proteins, and both the PI3K-AKT1 and ERK1/2 MAPK pathways were blocked by LY294002. Furthermore

  7. Lichenoid Reactions in Association with Tumor Necrosis Factor Alpha Inhibitors: A Review of the Literature and Addition of a Fourth Lichenoid Reaction.

    PubMed

    McCarty, Morgan; Basile, Amy; Bair, Brooke; Fivenson, David

    2015-06-01

    In this manuscript, a clinical case of a patient treated with adalimumab for Behcet's disease develops lichen planopilaris. A variety of mucocutaneous lichenoid eruptions have recently been described in association with tumor necrosis factor alpha inhibitors. The authors briefly discuss the clinical and pathological presentation of lichen planopilaris as well as a potential pathogenesis of cutaneous adverse effects seen as the result of tumor necrosis factor alpha inhibitor therapy. They review all case reports of lichen planopilaris occurring on tumor necrosis factor alpha inhibitors and suggest its classification as a fourth recognized pattern on this therapy.

  8. Structure/function analysis of human factor XII using recombinant deletion mutants. Evidence for an additional region involved in the binding to negatively charged surfaces.

    PubMed

    Citarella, F; Ravon, D M; Pascucci, B; Felici, A; Fantoni, A; Hack, C E

    1996-05-15

    The binding site of human factor XII (FXII) for negatively charged surfaces has been proposed to be localized in the N-terminal region of factor XII. We have generated two recombinant factor XII proteins that lack this region: one protein consisting of the second growth-factor-like domain, the kringle domain, the proline-rich region and the catalytic domain of FXII (rFXII-U-like), and another consisting of only 16 amino acids of the proline-rich region of the heavy-chain region and the catalytic domain (rFXII-1pc). Each recombinant truncated protein, as well as recombinant full-length FXII (rFXII), were produced in HepG2 cells and purified by immunoaffinity chromatography. The capability of these recombinant proteins to bind to negatively charged surfaces and to initiate contact activation was studied. Radiolabeled rFXII-U-like and, to a lesser extent, rFXII-lpc bound to glass in a concentration-dependent manner, yet with lower efficiency than rFXII. The binding of the recombinant proteins was inhibited by a 100-fold molar excess of non-labeled native factor XII. On native polyacrylamide gel electrophoresis, both truncated proteins appeared to bind also to dextran sulfate, a soluble negatively charged compound. Glass-bound rFXII-U-like was able to activate prekallikrein in FXII-deficient plasma (assessed by measuring the generation of kallikrein-C1-inhibitor complexes), but less efficiently than rFXII, rFXII-U-like and rFXII-lpc exhibited coagulant activity, but this activity was significantly lower than that of rFXII. These data confirm that the N-terminal part of the heavy-chain region of factor XII contains a binding site for negatively charged activating surfaces, and indicate that other sequences, possibly located on the second epidermal-growth-factor-like domain and/or the kringle domain, contribute to the binding of factor XII to these surfaces.

  9. Antecedents of Charter School Success in New York State: Charter School Management Agencies and Additional Factors That Affect English/Language Arts Test Scores in Elementary Charter Schools

    ERIC Educational Resources Information Center

    Schwarz, Jennifer

    2013-01-01

    Charter schools frequently receive public as well as federal attention, and there is a growing body of research becoming available examining charter schools. With all this research there is still a need for further studies which deal specifically with antecedents of charter school success. This study examined factors contributing toward the…

  10. Additivity of Factor Effects in Reading Tasks Is Still a Challenge for Computational Models: Reply to Ziegler, Perry, and Zorzi (2009)

    ERIC Educational Resources Information Center

    Besner, Derek; O'Malley, Shannon

    2009-01-01

    J. C. Ziegler, C. Perry, and M. Zorzi (2009) have claimed that their connectionist dual process model (CDP+) can simulate the data reported by S. O'Malley and D. Besner. Most centrally, they have claimed that the model simulates additive effects of stimulus quality and word frequency on the time to read aloud when words and nonwords are randomly…

  11. Additive influence of genetic predisposition and conventional risk factors in the incidence of coronary heart disease: a population-based study in Greece

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An additive genetic risk score (GRS) for coronary heart disease (CHD) has previously been associated with incident CHD in the population-based Greek European Prospective Investigation into Cancer and nutrition (EPIC) cohort. In this study, we explore GRS-‘environment’ joint actions on CHD for severa...

  12. Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres

    SciTech Connect

    Rios, Orlando; Radhakrishnan, Balasubramaniam; Caravias, George; Holcomb, Matthew

    2015-03-11

    Grid Logic Inc. is developing a method for sintering and melting fine metallic powders for additive manufacturing using spatially-compact, high-frequency magnetic fields called Micro-Induction Sintering (MIS). One of the challenges in advancing MIS technology for additive manufacturing is in understanding the power transfer to the particles in a powder bed. This knowledge is important to achieving efficient power transfer, control, and selective particle heating during the MIS process needed for commercialization of the technology. The project s work provided a rigorous physics-based model for induction heating of fine spherical particles as a function of frequency and particle size. This simulation improved upon Grid Logic s earlier models and provides guidance that will make the MIS technology more effective. The project model will be incorporated into Grid Logic s power control circuit of the MIS 3D printer product and its diagnostics technology to optimize the sintering process for part quality and energy efficiency.

  13. Opportunistic virus DNA levels after pediatric stem cell transplantation: serostatus matching, anti-thymocyte globulin, and total body irradiation are additive risk factors.

    PubMed

    Kullberg-Lindh, C; Mellgren, K; Friman, V; Fasth, A; Ascher, H; Nilsson, S; Lindh, M

    2011-04-01

    Viral opportunistic infections remain a threat to survival after stem cell transplantation (SCT). We retrospectively investigated infections caused by cytomegalovirus (CMV), Epstein-Barr virus (EBV), human herpesvirus type 6 (HHV6), or adenovirus (AdV) during the first 6-12 months after pediatric SCT. Serum samples from 47 consecutive patients were analyzed by quantitative real-time polymerase chain reaction assay. DNAemia at any time point occurred for CMV in 47%, for EBV in 45%, for HHV6 in 28%, and for AdV in 28%. Three patients (6.3%) died of CMV-, EBV-, or AdV-related complications 4, 9, and 24 weeks after SCT, respectively, representing 21% of total mortality. These 3 cases were clearly distinguishable by DNAemia increasing to high levels. Serum positivity for CMV immunoglobulin G in either recipient or donor at the time of SCT, total body irradiation, and anti-thymocyte globulin conditioning were independent risk factors for high CMV or EBV DNA levels. We conclude that DNAemia levels help to distinguish significant viral infections, and that surveillance and prophylactic measures should be focused on patients with risk factors in whom viral complications rapidly can become fatal.

  14. The development of decision limits for the GH-2000 detection methodology using additional insulin-like growth factor-I and amino-terminal pro-peptide of type III collagen assays.

    PubMed

    Holt, Richard I G; Böhning, Walailuck; Guha, Nishan; Bartlett, Christiaan; Cowan, David A; Giraud, Sylvain; Bassett, E Eryl; Sönksen, Peter H; Böhning, Dankmar

    2015-09-01

    The GH-2000 and GH-2004 projects have developed a method for detecting GH misuse based on measuring insulin-like growth factor-I (IGF-I) and the amino-terminal pro-peptide of type III collagen (P-III-NP). The objectives were to analyze more samples from elite athletes to improve the reliability of the decision limit estimates, to evaluate whether the existing decision limits needed revision, and to validate further non-radioisotopic assays for these markers. The study included 998 male and 931 female elite athletes. Blood samples were collected according to World Anti-Doping Agency (WADA) guidelines at various sporting events including the 2011 International Association of Athletics Federations (IAAF) World Athletics Championships in Daegu, South Korea. IGF-I was measured by the Immunotech A15729 IGF-I IRMA, the Immunodiagnostic Systems iSYS IGF-I assay and a recently developed mass spectrometry (LC-MS/MS) method. P-III-NP was measured by the Cisbio RIA-gnost P-III-P, Orion UniQ™ PIIINP RIA and Siemens ADVIA Centaur P-III-NP assays. The GH-2000 score decision limits were developed using existing statistical techniques. Decision limits were determined using a specificity of 99.99% and an allowance for uncertainty because of the finite sample size. The revised Immunotech IGF-I - Orion P-III-NP assay combination decision limit did not change significantly following the addition of the new samples. The new decision limits are applied to currently available non-radioisotopic assays to measure IGF-I and P-III-NP in elite athletes, which should allow wider flexibility to implement the GH-2000 marker test for GH misuse while providing some resilience against manufacturer withdrawal or change of assays.

  15. The development of decision limits for the GH-2000 detection methodology using additional insulin-like growth factor-I and amino-terminal pro-peptide of type III collagen assays.

    PubMed

    Holt, Richard I G; Böhning, Walailuck; Guha, Nishan; Bartlett, Christiaan; Cowan, David A; Giraud, Sylvain; Bassett, E Eryl; Sönksen, Peter H; Böhning, Dankmar

    2015-09-01

    The GH-2000 and GH-2004 projects have developed a method for detecting GH misuse based on measuring insulin-like growth factor-I (IGF-I) and the amino-terminal pro-peptide of type III collagen (P-III-NP). The objectives were to analyze more samples from elite athletes to improve the reliability of the decision limit estimates, to evaluate whether the existing decision limits needed revision, and to validate further non-radioisotopic assays for these markers. The study included 998 male and 931 female elite athletes. Blood samples were collected according to World Anti-Doping Agency (WADA) guidelines at various sporting events including the 2011 International Association of Athletics Federations (IAAF) World Athletics Championships in Daegu, South Korea. IGF-I was measured by the Immunotech A15729 IGF-I IRMA, the Immunodiagnostic Systems iSYS IGF-I assay and a recently developed mass spectrometry (LC-MS/MS) method. P-III-NP was measured by the Cisbio RIA-gnost P-III-P, Orion UniQ™ PIIINP RIA and Siemens ADVIA Centaur P-III-NP assays. The GH-2000 score decision limits were developed using existing statistical techniques. Decision limits were determined using a specificity of 99.99% and an allowance for uncertainty because of the finite sample size. The revised Immunotech IGF-I - Orion P-III-NP assay combination decision limit did not change significantly following the addition of the new samples. The new decision limits are applied to currently available non-radioisotopic assays to measure IGF-I and P-III-NP in elite athletes, which should allow wider flexibility to implement the GH-2000 marker test for GH misuse while providing some resilience against manufacturer withdrawal or change of assays. PMID:25645199

  16. Pump apparatus including deconsolidator

    SciTech Connect

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  17. Solving the Big Data (BD) Problem in Advanced Manufacturing (Subcategory for work done at Georgia Tech. Study Process and Design Factors for Additive Manufacturing Improvement)

    SciTech Connect

    Clark, Brett W.; Diaz, Kimberly A.; Ochiobi, Chinaza Darlene; Paynabar, Kamran

    2015-09-01

    3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.

  18. Optical modulator including grapene

    DOEpatents

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  19. High levels of acute phase proteins and soluble 70 kDa heat shock proteins are independent and additive risk factors for mortality in colorectal cancer

    PubMed Central

    Kocsis, Judit; Mészáros, Tamás; Madaras, Balázs; Tóth, Éva Katalin; Kamondi, Szilárd; Gál, Péter; Varga, Lilian; Prohászka, Zoltán

    2010-01-01

    Recently, we reported that high soluble Hsp70 (sHsp70) level was a significant predictor of mortality during an almost 3-year-long follow-up period in patients with colorectal cancer. This association was the strongest in the group of <70-year-old female patients as well as in those who were in a less advanced stage of the disease at baseline. According to these observations, measurement of the serum level of sHsp70 is a useful, stage-independent prognostic marker in colorectal cancer, especially in patients without distant metastasis. Since many literature data indicated that measurement of C-reactive protein (CRP) and other acute phase proteins (APPs) may also be suitable for predicting the mortality of patients with colorectal cancer, it seemed reasonable to study whether the effect of sHsp70 and other APPs are related or independent. In order to answer this question, we measured the concentrations of CRP as well as of other complement-related APPs (C1 inhibitor, C3, and C9) along with that of the MASP-2 complement component in the sera of 175 patients with colorectal cancer and known levels of sHsp70, which have been used in our previous study. High (above median) levels of CRP, C1 esterase inhibitor (C1-INH), and sHsp70 were found to be independently associated with poor patient survival, whereas no such association was observed with the other proteins tested. According to the adjusted Cox proportional hazards analysis, the additive effect of high sHsp70, CRP, and C1-INH levels on the survival of patients exceeded that of high sHsp70 alone, with a hazard ratio (HR) of 2.83 (1.13–70.9). In some subgroups of patients, such as in females [HR 4.80 (1.07–21.60)] or in ≤70-year-old patients [HR 11.53 (2.78–47.70)], even greater differences were obtained. These findings indicate that the clinical mortality–prediction value of combined measurements of sHsp70, CRP, and C1-INH with inexpensive methods can be very high, especially in specific subgroups of

  20. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  1. Non-valvular atrial fibrillation patients with none or one additional risk factor of the CHA2DS2-VASc score. A comprehensive net clinical benefit analysis for warfarin, aspirin, or no therapy.

    PubMed

    Lip, Gregory Y H; Skjøth, Flemming; Nielsen, Peter B; Larsen, Torben Bjerregaard

    2015-10-01

    Oral anticoagulation (OAC) to prevent stroke has to be balanced against the potential harm of serious bleeding, especially intracranial haemorrhage (ICH). We determined the net clinical benefit (NCB) balancing effectiveness and safety of no antithrombotic therapy, aspirin and warfarin in AF patients with none or one stroke risk factor. Using Danish registries, we determined NCB using various definitions intrinsic to our cohort (Danish weights at 1 and 5 year follow-up), with risk weights which were derived from the hazard ratio (HR) of death following an event, relative to HR of death after ischaemic stroke. When aspirin was compared to no treatment, NCB was neutral or negative for both risk strata. For warfarin vs no treatment, NCB using Danish weights was neutral where no risk factors were present and using five years follow-up. For one stroke risk factor, NCB was positive for warfarin vs no treatment, for one year and five year follow-up. For warfarin vs aspirin use in patients with no risk factors, NCB was positive with one year follow-up, but neutral with five year follow-up. With one risk factor, NCB was generally positive for warfarin vs aspirin. In conclusion, we show a positive overall advantage (i.e. positive NCB) of effective stroke prevention with OAC, compared to no therapy or aspirin with one additional stroke risk factor, using Danish weights. 'Low risk' AF patients with no additional stroke risk factors (i.e.CHA2DS2-VASc 0 in males, 1 in females) do not derive any advantage (neutral or negative NCB) with aspirin, nor with warfarin therapy in the long run.

  2. Listening to Include

    ERIC Educational Resources Information Center

    Veck, Wayne

    2009-01-01

    This paper attempts to make important connections between listening and inclusive education and the refusal to listen and exclusion. Two lines of argument are advanced. First, if educators and learners are to include each other within their educational institutions as unique individuals, then they will need to listen attentively to each other.…

  3. A Randomized Study of the Effects of Additional Fruit and Nuts Consumption on Hepatic Fat Content, Cardiovascular Risk Factors and Basal Metabolic Rate

    PubMed Central

    Romu, Thobias; Dahlqvist-Leinhard, Olof; Borga, Magnus; Leandersson, Per; Nystrom, Fredrik H.

    2016-01-01

    Background Fruit has since long been advocated as a healthy source of many nutrients, however, the high content of sugars in fruit might be a concern. Objectives To study effects of an increased fruit intake compared with similar amount of extra calories from nuts in humans. Methods Thirty healthy non-obese participants were randomized to either supplement the diet with fruits or nuts, each at +7 kcal/kg bodyweight/day for two months. Major endpoints were change of hepatic fat content (HFC, by magnetic resonance imaging, MRI), basal metabolic rate (BMR, with indirect calorimetry) and cardiovascular risk markers. Results Weight gain was numerically similar in both groups although only statistically significant in the group randomized to nuts (fruit: from 22.15±1.61 kg/m2 to 22.30±1.7 kg/m2, p = 0.24 nuts: from 22.54±2.26 kg/m2 to 22.73±2.28 kg/m2, p = 0.045). On the other hand BMR increased in the nut group only (p = 0.028). Only the nut group reported a net increase of calories (from 2519±721 kcal/day to 2763±595 kcal/day, p = 0.035) according to 3-day food registrations. Despite an almost three-fold reported increased fructose-intake in the fruit group (from 9.1±6.0 gram/day to 25.6±9.6 gram/day, p<0.0001, nuts: from 12.4±5.7 gram/day to 6.5±5.3 gram/day, p = 0.007) there was no change of HFC. The numerical increase in fasting insulin was statistical significant only in the fruit group (from 7.73±3.1 pmol/l to 8.81±2.9 pmol/l, p = 0.018, nuts: from 7.29±2.9 pmol/l to 8.62±3.0 pmol/l, p = 0.14). Levels of vitamin C increased in both groups while α-tocopherol/cholesterol-ratio increased only in the fruit group. Conclusions Although BMR increased in the nut-group only this was not linked with differences in weight gain between groups which potentially could be explained by the lack of reported net caloric increase in the fruit group. In healthy non-obese individuals an increased fruit intake seems safe from cardiovascular risk perspective, including

  4. Combination of nifedipine and subtherapeutic dose of cyclosporin additively suppresses mononuclear cells activation of patients with rheumatoid arthritis and normal individuals via Ca2+–calcineurin–nuclear factor of activated T cells pathway

    PubMed Central

    Lai, N-S; Yu, C-L; Yin, W-Y; Yu, H-C; Huang, H-B; Tung, C-H; Lu, M-C

    2012-01-01

    Abnormal Ca2+-mediated signalling contributes to the pathogenesis of rheumatoid arthritis (RA). However, the potential implication of calcium channel blocker in RA remained unknown. We hypothesized that nifedipine, an L-type calcium channel blocker, combined with a calcineurin inhibitor, could suppress T cell activation via targeting different level of the Ca2+ signalling pathway. The percentage of activated T cells and the apoptotic rate of mononuclear cells (MNCs) was measured by flow cytometry. The MNC viability, cytokine production, cytosolic Ca2+ level and activity of the nuclear factor of activated T cells (NFAT) were measured by enzyme-linked immunosorbent assay (ELISA). The NFAT-regulated gene expression, including interleukin (IL)-2, interferon (IFN)-γ and granulocyte–macrophage colony-stimulating factor (GM-CSF), was measured by real-time polymerase chain reaction (PCR). We found that the percentage of activated T cells in anti-CD3 + anti-CD28-activated MNC was higher in RA patients. High doses of nifedipine (50 µM) increased MNCs apoptosis, inhibited T cell activation and decreased T helper type 2 (Th1) (IFN-γ)/Th2 (IL-10) cytokine production in both groups. The Ca2+ influx was lower in anti-CD3 + anti-CD28-activated MNC from RA patients than healthy volunteers and suppressed by nifedipine. When combined with a subtherapeutic dose (50 ng/ml) of cyclosporin, 1 µM nifedipine suppressed the percentage of activated T cells in both groups. Moreover, this combination suppressed more IFN-γ secretion and NFAT-regulated gene (GM-CSF and IFN-γ) expression in RA-MNCs than normal MNCs via decreasing the activity of NFATc1. In conclusion, we found that L-type Ca2+ channel blockers and subtherapeutic doses of cyclosporin act additively to suppress the Ca2+-calcineurin-NFAT signalling pathway, leading to inhibition of T cell activity. We propose that this combination may become a potential treatment of RA. PMID:22385242

  5. Additively Manufactured 3D Porous Ti-6Al-4V Constructs Mimic Trabecular Bone Structure and Regulate Osteoblast Proliferation, Differentiation and Local Factor Production in a Porosity and Surface Roughness Dependent Manner

    PubMed Central

    Cheng, Alice; Humayun, Aiza; Cohen, David J.; Boyan, Barbara D.; Schwartz, Zvi

    2014-01-01

    Additive manufacturing by laser sintering is able to produce high resolution metal constructs for orthopaedic and dental implants. In this study, we used a human trabecular bone template to design and manufacture Ti-6Al-4V constructs with varying porosity via laser sintering. Characterization of constructs revealed interconnected porosities ranging from 15–70% with compressive moduli of 2063–2954 MPa. These constructs with macro porosity were further surface-treated to create a desirable multi-scale micro-/nano-roughness, which has been shown to enhance the osseointegration process. Osteoblasts (MG63 cells) exhibited high viability when grown on the constructs. Proliferation (DNA) and alkaline phosphatase specific activity (ALP), an early differentiation marker, decreased as porosity increased, while osteocalcin (OCN), a late differentiation marker, as well as osteoprotegerin (OPG), vascular endothelial growth factor (VEGF) and bone morphogenetic proteins 2 and 4 (BMP2, BMP4) increased with increasing porosity. 3D constructs with the highest porosity and surface modification supported the greatest osteoblast differentiation and local factor production. These results indicate that additively manufactured 3D porous constructs mimicking human trabecular bone and produced with additional surface treatment can be customized for increased osteoblast response. Increased factors for osteoblast maturation and differentiation on high porosity constructs suggest the enhanced performance of these surfaces for increasing osseointegration in vivo. PMID:25287305

  6. [Additional administration of dutasteride in patients with benign prostatic hyperplasia who did not respond sufficiently to α1-adrenoceptor antagonist : investigation of clinical factors affecting the therapeutic effect of dutasteride].

    PubMed

    Masuda, Mitsunobu; Murai, Tetsuo; Osada, Yutaka; Kawai, Masaki; Kasuga, Jun; Yokomizo, Yumiko; Kuroda, Shinnosuke; Nakamura, Mami; Noguchi, Go

    2014-02-01

    We performed additional administration of dutasteride in patients who did not respond sufficiently to α1-adrenoceptor antagonist treatment for lower urinary tract symptoms (LUTS) associated with benign prostatic hyperplasia (BPH) (LUTS/BPH). Among 76 registered patients, efficacy was analyzed in 58 patients. International Prostate Symptom Score (IPSS), subscores for voiding and storage symptoms and quality of life (QOL) on the IPSS, and Overactive Bladder Symptom Score (OABSS) were all significantly improved from the third month of administration compared to the time of initiating additional administration of dutasteride. Additional administration of dutasteride also significantly reduced prostate volume, and residual urine with the exception of the sixth month after administration. Age at initiation of administration and voiding symptom subscore on the IPSS were clinical factors affecting the therapeutic effects of dutasteride. The rate of improvement with treatment decreased with increasing age at initiation of dutasteride administration, and increased as voiding symptom subscore on the IPSS increased. Therefore, additional administration of dutasteride appears useful for cases of LUTS/BPH in which a sufficient response is not achieved with α1-adrenoceptor antagonist treatment. Because patients who have severe voiding symptoms or begin dutasteride at an early age may be expected to respond particularly well to dutasteride in terms of clinical efficacy, they were considered to be suitable targets for additional administration. PMID:24755815

  7. PNRC: a proline-rich nuclear receptor coregulatory protein that modulates transcriptional activation of multiple nuclear receptors including orphan receptors SF1 (steroidogenic factor 1) and ERRalpha1 (estrogen related receptor alpha-1).

    PubMed

    Zhou, D; Quach, K M; Yang, C; Lee, S Y; Pohajdak, B; Chen, S

    2000-07-01

    PNRC (proline-rich nuclear receptor coregulatory protein) was identified using bovine SF1 (steroidogenic factor 1) as the bait in a yeast two-hybrid screening of a human mammary gland cDNA expression library. PNRC is unique in that it has a molecular mass of 35 kDa, significantly smaller than most of the coregulatory proteins reported so far, and it is proline-rich. PNRC's nuclear localization was demonstrated by immunofluorescence and Western blot analyses. In the yeast two-hybrid assays, PNRC interacted with the orphan receptors SF1 and ERRalpha1 in a ligand-independent manner. PNRC was also found to interact with the ligand-binding domains of all the nuclear receptors tested including estrogen receptor (ER), androgen receptor (AR), glucocorticoid receptor (GR), progesterone receptor (PR), thyroid hormone receptor (TR), retinoic acid receptor (RAR), and retinoid X receptor (RXR) in a ligand-dependent manner. Functional AF2 domain is required for nuclear receptors to bind to PNRC. Furthermore, in vitro glutathione-S-transferase pull-down assay was performed to demonstrate a direct contact between PNRC and nuclear receptors such as SF1. Coimmunoprecipitation experiment using Hela cells that express PNRC and ER was performed to confirm the interaction of PNRC and nuclear receptors in vivo in a ligand-dependent manner. PNRC was found to function as a coactivator to enhance the transcriptional activation mediated by SF1, ERR1 (estrogen related receptor alpha-1), PR, and TR. By examining a series of deletion mutants of PNRC using the yeast two-hybrid assay, a 23-amino acid (aa) sequence in the carboxy-terminal region, aa 278-300, was shown to be critical and sufficient for the interaction with nuclear receptors. This region is proline rich and contains a SH3-binding motif, S-D-P-P-S-P-S. Results from the mutagenesis study demonstrated that the two conserved proline (P) residues in this motif are crucial for PNRC to interact with the nuclear receptors. The exact 23

  8. Fire extinct experiments with water mist by adding additives

    NASA Astrophysics Data System (ADS)

    Yang, Lijun; Zhao, Jianbo

    2011-12-01

    The effects of fire extinguishment with water mist by adding different additives were studied. Tens of chemical substances (including alkali metal salt, dilution agent and surface active agent) were selected as additives due to their different extinct mechanisms. At first the performance of fire extinguishment with single additive was studied, then the effects of the same kinds of chemical substances under the same mass fraction were compared to study their influences on the fire extinguishment factors, including extinct time, fire temperature and oxygen concentration from which the fire extinct mechanism with additives could be concluded. Based on this the experiments were conducted to study the cooperate effect of the complexity of different additives. It indicated the relations between different firefighting mechanisms and different additives were competitive. From a large number of experiments the extinct mechanism with water mist by adding additives was concluded and an optimal compounding additive was selected.

  9. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  10. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  11. Risk Factors for Obesity at Age 3 in Alaskan Children, Including the Role of Beverage Consumption: Results from Alaska PRAMS 2005-2006 and Its Three-Year Follow-Up Survey, CUBS, 2008-2009

    PubMed Central

    Wojcicki, Janet M.; Young, Margaret B.; Perham-Hester, Katherine A.; de Schweinitz, Peter; Gessner, Bradford D.

    2015-01-01

    Background Prenatal and early life risk factors are associated with childhood obesity. Alaska Native children have one of the highest prevalences of childhood obesity of all US racial/ethnic groups. Methods Using the Pregnancy Risk Assessment Monitoring System (PRAMS) and the follow-up survey at 3 years of age (CUBS), we evaluated health, behavioral, lifestyle and nutritional variables in relation to obesity (95th percentile for body mass index (BMI)) at 3 years of age. Multivariate logistic regression modeling was conducted using Stata 12.0 to evaluate independent risk factors for obesity in non-Native and Alaska Native children. Results We found an obesity prevalence of 24.9% in all Alaskan and 42.2% in Alaska Native 3 year olds. Among Alaska Native children, obesity prevalence was highest in the Northern/Southwest part of the state (51.6%, 95%CI (42.6-60.5)). Independent predictive factors for obesity at age 3 years in Alaska non-Native children were low income (<$10,000 in the year before the child was born (OR 3.94, 95%CI 1.22--17.03) and maternal pre-pregnancy obesity (OR 2.01, 95%CI 1.01-4.01) and longer duration of breastfeeding was protective (OR 0.95, 95%CI 0.91-0.995). Among Alaska Native children, predictive factors were witnessing domestic violence/abuse as a 3 year-old (OR 2.28, 95%CI 1.17-7.60). Among obese Alaska Native children, there was an increased daily consumption of energy dense beverages in the Northern/Southwest region of the state, which may explain higher rates of obesity in this part of the state. Conclusions The high prevalence of obesity in Alaska Native children may be explained by differences in lifestyle patterns and food consumption in certain parts of the state, specifically the Northern/Southwest region, which have higher consumption of energy dense beverages. PMID:25793411

  12. Nitrogen-source regulation of yeast gamma-glutamyl transpeptidase synthesis involves the regulatory network including the GATA zinc-finger factors Gln3, Nil1/Gat1 and Gzf3.

    PubMed Central

    Springael, Jean-Yves; Penninckx, Michel J

    2003-01-01

    In Saccharomyces cerevisiae, the CIS2 gene encodes gamma-glutamyl transpeptidase (gamma-GT; EC 2.3.2.2), the main GSH-degrading enzyme. The promoter region of CIS2 contains one stress-response element (CCCCT) and eight GAT(T/A)A core sequences, probably involved in nitrogen-regulated transcription. We show in the present study that expression of CIS2 is indeed regulated according to the nature of the nitrogen source. Expression is highest in cells growing on a poor nitrogen source such as urea. Under these conditions, the GATA zinc-finger transcription factors Nil1 and Gln3 are both required for CIS2 expression, Nil1 appearing as the more important factor. We further show that Gzf3, another GATA zinc-finger protein, acts as a negative regulator in nitrogen-source control of CIS2 expression. During growth on a preferred nitrogen source like NH(4)(+), CIS2 expression is repressed through a mechanism involving (at least) the Gln3-binding protein Ure2/GdhCR. Induction of CIS2 expression during nitrogen starvation is dependent on Gln3 and Nil1. Furthermore, rapamycin causes similar CIS2 activation, indicating that the target of rapamycin signalling pathway controls CIS2 expression via Gln3 and Nil1 in nitrogen-starved cells. Finally, our results show that CIS2 expression is induced mainly by nitrogen starvation but apparently not by other types of stress. PMID:12529169

  13. Murine elongation factor 1 alpha (EF-1 alpha) is posttranslationally modified by novel amide-linked ethanolamine-phosphoglycerol moieties. Addition of ethanolamine-phosphoglycerol to specific glutamic acid residues on EF-1 alpha

    SciTech Connect

    Whiteheart, S.W.; Shenbagamurthi, P.; Chen, L.; Cotter, R.J.; Hart, G.W. )

    1989-08-25

    Elongation Factor 1 alpha (EF-1 alpha), an important eukaryotic translation factor, transports charged aminoacyl-tRNA from the cytosol to the ribosomes during poly-peptide synthesis. Metabolic radiolabeling with ({sup 3}H) ethanolamine shows that, in all cells examined, EF-1 alpha is the major radiolabeled protein. Radiolabeled EF-1 alpha has an apparent Mr = 53,000 and a basic isoelectric point. It is cytosolic and does not contain N-linked oligosaccharides. Trypsin digestion of murine EF-1 alpha generated two major ({sup 3}H)ethanolamine-labeled peptides. Three peptides were sequenced and were identical to two distinct regions of the human EF-1 alpha protein. Blank sequencing cycles coinciding with glutamic acid in the human cDNA-derived sequence were also found to release ({sup 3}H)ethanolamine, and compositional analysis of these peptides confirmed the presence of glutamic acid. Dansylation analysis demonstrates that the amine group of the ethanolamine is blocked. These results indicate that EF-1 alpha is posttranslationally modified by the covalent attachment of ethanolamine via an amide bond to at least two specific glutamic acid residues (Glu-301 and Glu-374). The hydroxyl group of the attached ethanolamine was shown by mass spectrometry and compositional analysis, to be further modified by the addition of a phosphoglycerol unit. This novel posttranslational modification may represent an important alteration of EF-1 alpha, comparable to the regulatory effects of posttranslational methylation of EF-1 alpha lysine residues.

  14. Real-time RT-PCR profiling of transcription factors including 34 MYBs and signaling components in white lupin reveals their P status dependent and organ-specific expression

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Phosphorus (P) is often a limiting macronutrient because of its low availability in soils. White lupin (Lupinus albus L.) plants are well adapted to growth under P-deficient conditions. White lupin acclimation to P-deficiency includes changes in root architecture and enhanced expression of numerous ...

  15. [Patch-testing methods: additional specialised or additional series].

    PubMed

    Cleenewerck, M-B

    2009-01-01

    The tests in the European standard battery must occasionally be supplemented by specialised or additional batteries, particularly where the contact allergy is thought to be of occupational origin. These additional batteries cover all allergens associated with various professional activities (hairdressing, baking, dentistry, printing, etc.) and with different classes of materials and chemical products (glue, plastic, rubber...). These additional tests may also include personal items used by patients on a daily basis such as cosmetics, shoes, plants, textiles and so on.

  16. Activity of the upstream TATA-less promoter of the p21(Waf1/Cip1) gene depends on transcription factor IIA (TFIIA) in addition to TFIIA-reactive TBP-like protein.

    PubMed

    Suzuki, Hidefumi; Maeda, Ryo; Nakadai, Tomoyoshi; Tamura, Taka-aki

    2014-07-01

    TATA-binding protein-like protein (TLP) binds to transcription factor IIA (TFIIA) with high affinity, although the significance of this binding is poorly understood. In this study, we investigated the role of TFIIA in transcriptional regulation of the p21(Waf1/Cip1) (p21) gene. It has been shown that TLP is indispensable for p53-activated transcription from an upstream TATA-less promoter of the p21 gene. We found that mutant TLPs having decreased TFIIA-binding ability exhibited weakened transcriptional activation function for the upstream promoter. Activity of the upstream promoter was enhanced considerably by an increased amount of TFIIA in a p53-dependent manner, whereas activity of the TATA-containing downstream promoter was enhanced only slightly. TFIIA potentiated the upstream promoter additively with TLP. Although TFIIA is recruited to both promoters, activity of the upstream promoter was much more dependent on TFIIA. Recruitment of TFIIA and TLP to the upstream promoter was augmented in etoposide-treated cells, in which the amount of TFIIA-TLP complex is increased, and TFIIA-reactive TLP was required for the recruitment of both factors. It was confirmed that etoposide-stimulated transcription depends on TLP. We also found that TFIIA-reactive TLP acts to decrease cell growth rate, which can be explained by interaction of the p21 promoter with the transcription factors that we examined. The results of the present study suggest that the upstream TATA-less promoter of p21 needs TFIIA and TFIIA-reactive TLP for p53-dependent transcriptional enhancement.

  17. Sarks as additional fermions

    NASA Astrophysics Data System (ADS)

    Agrawal, Jyoti; Frampton, Paul H.; Jack Ng, Y.; Nishino, Hitoshi; Yasuda, Osamu

    1991-03-01

    An extension of the standard model is proposed. The gauge group is SU(2) X ⊗ SU(3) C ⊗ SU(2) S ⊗ U(1) Q, where all gauge symmetries are unbroken. The colour and electric charge are combined with SU(2) S which becomes strongly coupled at approximately 500 GeV and binds preons to form fermionic and vector bound states. The usual quarks and leptons are singlets under SU(2) X but additional fermions, called sarks. transform under it and the electroweak group. The present model explains why no more than three light quark-lepton families can exist. Neutral sark baryons, called narks, are candidates for the cosmological dark matter having the characteristics designed for WIMPS. Further phenomenological implications of sarks are analyzed i including electron-positron annihilation. Z 0 decay, flavor-changing neutral currents. baryon-number non-conservation, sarkonium and the neutron electric dipole moment.

  18. Employment, Training, and Literacy Enhancement Act of 1997. Report of the Committee on Education and the Workforce, House of Representatives, on H.R. 1385 Together with Additional and Dissenting Views [Including Cost Estimate of the Congressional Budget Office], 105th Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Committee on Education and the Workforce.

    This document contains the text of the Employment, Training, and Literacy Enhancement Act of 1997, as amended by committee, including the titles that cover the following: general provisions; employment and training programs for disadvantaged youth; federally administered programs; adult education programs; miscellaneous provisions; the State Human…

  19. The VITRO Score (Von Willebrand Factor Antigen/Thrombocyte Ratio) as a New Marker for Clinically Significant Portal Hypertension in Comparison to Other Non-Invasive Parameters of Fibrosis Including ELF Test

    PubMed Central

    Hametner, Stephanie; Ferlitsch, Arnulf; Ferlitsch, Monika; Etschmaier, Alexandra; Schöfl, Rainer; Ziachehabi, Alexander; Maieron, Andreas

    2016-01-01

    Background Clinically significant portal hypertension (CSPH), defined as hepatic venous pressure gradient (HVPG) ≥10 mmHg, causes major complications. HVPG is not always available, so a non-invasive tool to diagnose CSPH would be useful. VWF-Ag can be used to diagnose. Using the VITRO score (the VWF-Ag/platelet ratio) instead of VWF-Ag itself improves the diagnostic accuracy of detecting cirrhosis/ fibrosis in HCV patients. Aim This study tested the diagnostic accuracy of VITRO score detecting CSPH compared to HVPG measurement. Methods All patients underwent HVPG testing and were categorised as CSPH or no CSPH. The following patient data were determined: CPS, D’Amico stage, VITRO score, APRI and transient elastography (TE). Results The analysis included 236 patients; 170 (72%) were male, and the median age was 57.9 (35.2–76.3; 95% CI). Disease aetiology included ALD (39.4%), HCV (23.4%), NASH (12.3%), other (8.1%) and unknown (11.9%). The CPS showed 140 patients (59.3%) with CPS A; 56 (23.7%) with CPS B; and 18 (7.6%) with CPS C. 136 patients (57.6%) had compensated and 100 (42.4%) had decompensated cirrhosis; 83.9% had HVPG ≥10 mmHg. The VWF-Ag and the VITRO score increased significantly with worsening HVPG categories (P<0.0001). ROC analysis was performed for the detection of CSPH and showed AUC values of 0.92 for TE, 0.86 for VITRO score, 0.79 for VWF-Ag, 0.68 for ELF and 0.62 for APRI. Conclusion The VITRO score is an easy way to diagnose CSPH independently of CPS in routine clinical work and may improve the management of patients with cirrhosis. PMID:26895398

  20. Dual-energy precursor and nuclear erythroid-related factor 2 activator treatment additively improve redox glutathione levels and neuron survival in aging and Alzheimer mouse neurons upstream of reactive oxygen species.

    PubMed

    Ghosh, Debolina; LeVault, Kelsey R; Brewer, Gregory J

    2014-01-01

    To determine whether glutathione (GSH) loss or increased reactive oxygen species (ROS) are more important to neuron loss, aging, and Alzheimer's disease (AD), we stressed or boosted GSH levels in neurons isolated from aging 3xTg-AD neurons compared with those from age-matched nontransgenic (non-Tg) neurons. Here, using titrating with buthionine sulfoximine, an inhibitor of γ-glutamyl cysteine synthetase (GCL), we observed that GSH depletion increased neuronal death of 3xTg-AD cultured neurons at increasing rates across the age span, whereas non-Tg neurons were resistant to GSH depletion until old age. Remarkably, the rate of neuron loss with ROS did not increase in old age and was the same for both genotypes, which indicates that cognitive deficits in the AD model were not caused by ROS. Therefore, we targeted for neuroprotection activation of the redox sensitive transcription factor, nuclear erythroid-related factor 2 (Nrf2) by 18 alpha glycyrrhetinic acid to stimulate GSH synthesis through GCL. This balanced stimulation of a number of redox enzymes restored the lower levels of Nrf2 and GCL seen in 3xTg-AD neurons compared with those of non-Tg neurons and promoted translocation of Nrf2 to the nucleus. By combining the Nrf2 activator together with the NADH precursor, nicotinamide, we increased neuron survival against amyloid beta stress in an additive manner. These stress tests and neuroprotective treatments suggest that the redox environment is more important for neuron survival than ROS. The dual neuroprotective treatment with nicotinamide and an Nrf2 inducer indicates that these age-related and AD-related changes are reversible.

  1. 40 CFR 1033.245 - Deterioration factors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-hour test point. For example, if you use aftertreatment technology that controls emissions of a... multiplicative or additive) or include the effects in combined deterioration factors that include exhaust...

  2. The Arabidopsis bHLH Transcription Factors MYC3 and MYC4 Are Targets of JAZ Repressors and Act Additively with MYC2 in the Activation of Jasmonate Responses[C][W

    PubMed Central

    Fernández-Calvo, Patricia; Chini, Andrea; Fernández-Barbero, Gemma; Chico, José-Manuel; Gimenez-Ibanez, Selena; Geerinck, Jan; Eeckhout, Dominique; Schweizer, Fabian; Godoy, Marta; Franco-Zorrilla, José Manuel; Pauwels, Laurens; Witters, Erwin; Puga, María Isabel; Paz-Ares, Javier; Goossens, Alain; Reymond, Philippe; De Jaeger, Geert; Solano, Roberto

    2011-01-01

    Jasmonates (JAs) trigger an important transcriptional reprogramming of plant cells to modulate both basal development and stress responses. In spite of the importance of transcriptional regulation, only one transcription factor (TF), the Arabidopsis thaliana basic helix-loop-helix MYC2, has been described so far as a direct target of JAZ repressors. By means of yeast two-hybrid screening and tandem affinity purification strategies, we identified two previously unknown targets of JAZ repressors, the TFs MYC3 and MYC4, phylogenetically closely related to MYC2. We show that MYC3 and MYC4 interact in vitro and in vivo with JAZ repressors and also form homo- and heterodimers with MYC2 and among themselves. They both are nuclear proteins that bind DNA with sequence specificity similar to that of MYC2. Loss-of-function mutations in any of these two TFs impair full responsiveness to JA and enhance the JA insensitivity of myc2 mutants. Moreover, the triple mutant myc2 myc3 myc4 is as impaired as coi1-1 in the activation of several, but not all, JA-mediated responses such as the defense against bacterial pathogens and insect herbivory. Our results show that MYC3 and MYC4 are activators of JA-regulated programs that act additively with MYC2 to regulate specifically different subsets of the JA-dependent transcriptional response. PMID:21335373

  3. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  4. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  5. Laboratory tests of sludge-control additives

    SciTech Connect

    Tatnall, R.E.

    1996-07-01

    Laboratory {open_quotes}jar{close_quotes} tests compared eleven different fuel oil and diesel fuel sludge-control additives. Factors studied included (1) ability to disperse and prevent buildup of sludge deposits on surfaces, (2) ability to protect steel from corrosion, (3) ability to inhibit growth and proliferation of bacteria, and (4) ability to disperse water. Results varied greatly, and it was found that many commercial products do not do what they claim. It is concluded that fuel retailers should not believe manufacturers` claims for their additive products, but rather should test such products themselves to be sure that the benefits of treatment are real. A simplified form of the procedure used here is proposed as one way for dealers to do such testing.

  6. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  7. Feynman amplitudes with confinement included

    NASA Astrophysics Data System (ADS)

    Simonov, Yu. A.

    2009-07-01

    Amplitudes for any multipoint Feynman diagram are written taking into account vacuum background confining field. Higher order gluon exchanges are treated within background perturbation theory. For amplitudes with hadrons in initial or final states vertices are shown to be expressed by the corresponding wave function with the renormalized z factors. Examples of two-point functions, three-point functions (form factors), and decay amplitudes are explicitly considered.

  8. Additive manufacturing in production: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  9. The +37 kb Cebpa Enhancer Is Critical for Cebpa Myeloid Gene Expression and Contains Functional Sites that Bind SCL, GATA2, C/EBPα, PU.1, and Additional Ets Factors.

    PubMed

    Cooper, Stacy; Guo, Hong; Friedman, Alan D

    2015-01-01

    The murine Cebpa gene contains an evolutionarily conserved 453 bp enhancer located at +37 kb that, together with its promoter, directs expression to myeloid progenitors and to long-term hematopoietic stem cells in transgenic mice. In human acute myeloid leukemia cases, the enhancer lacks point mutations but binds the RUNX1-ETO oncoprotein. The enhancer contains the H3K4me1 and H3K27Ac histone modifications, denoting an active enhancer, at progressively increasing levels as long-term hematopoietic stem cells transition to granulocyte-monocyte progenitors. We previously identified four enhancer sites that bind RUNX1 and demonstrated that their integrity is required for maximal enhancer activity in 32Dcl3 myeloid cells. The +37 kb Cebpa enhancer also contains C/EBP, Ets factor, Myb, GATA, and E-box consensus sites conserved in the human +42 kb CEBPA enhancer. Mutation of the two C/EBP, seven Ets, one Myb, two GATA, or two E-box sites reduces activity of an enhancer-promoter reporter in 32Dcl3 cells. In 293T gel shift assays, exogenous C/EBPα binds both C/EBP sites, c-Myb binds the Myb site, PU.1 binds the second Ets site, PU.1, Fli-1, ERG, and Ets1 bind the sixth Ets site, GATA2 binds both GATA sites, and SCL binds the second E-box. Endogenous hematopoietic RUNX1, PU.1, Fli-1, ERG, C/EBPα, GATA2, and SCL were previously shown to bind the enhancer, and we find that endogenous PU.1 binds the second Ets site in 32Dcl3 cells. Using CRISPR/Cas9, we developed 32Dcl3 lines in which the wild-type enhancer alleles are replaced with a variant mutant in the seven Ets sites. These lines have 20-fold reduced Cebpa mRNA when cultured in IL-3 or G-CSF, demonstrating a critical requirement for enhancer integrity for optimal Cebpa expression. In addition, these results indicate that the +37 kb Cebpa enhancer is the focus of multiple regulatory transcriptional pathways that impact its expression during normal hematopoiesis and potentially during myeloid transformation.

  10. The +37 kb Cebpa Enhancer Is Critical for Cebpa Myeloid Gene Expression and Contains Functional Sites that Bind SCL, GATA2, C/EBPα, PU.1, and Additional Ets Factors

    PubMed Central

    Cooper, Stacy; Guo, Hong; Friedman, Alan D.

    2015-01-01

    The murine Cebpa gene contains an evolutionarily conserved 453 bp enhancer located at +37 kb that, together with its promoter, directs expression to myeloid progenitors and to long-term hematopoietic stem cells in transgenic mice. In human acute myeloid leukemia cases, the enhancer lacks point mutations but binds the RUNX1-ETO oncoprotein. The enhancer contains the H3K4me1 and H3K27Ac histone modifications, denoting an active enhancer, at progressively increasing levels as long-term hematopoietic stem cells transition to granulocyte-monocyte progenitors. We previously identified four enhancer sites that bind RUNX1 and demonstrated that their integrity is required for maximal enhancer activity in 32Dcl3 myeloid cells. The +37 kb Cebpa enhancer also contains C/EBP, Ets factor, Myb, GATA, and E-box consensus sites conserved in the human +42 kb CEBPA enhancer. Mutation of the two C/EBP, seven Ets, one Myb, two GATA, or two E-box sites reduces activity of an enhancer-promoter reporter in 32Dcl3 cells. In 293T gel shift assays, exogenous C/EBPα binds both C/EBP sites, c-Myb binds the Myb site, PU.1 binds the second Ets site, PU.1, Fli-1, ERG, and Ets1 bind the sixth Ets site, GATA2 binds both GATA sites, and SCL binds the second E-box. Endogenous hematopoietic RUNX1, PU.1, Fli-1, ERG, C/EBPα, GATA2, and SCL were previously shown to bind the enhancer, and we find that endogenous PU.1 binds the second Ets site in 32Dcl3 cells. Using CRISPR/Cas9, we developed 32Dcl3 lines in which the wild-type enhancer alleles are replaced with a variant mutant in the seven Ets sites. These lines have 20-fold reduced Cebpa mRNA when cultured in IL-3 or G-CSF, demonstrating a critical requirement for enhancer integrity for optimal Cebpa expression. In addition, these results indicate that the +37 kb Cebpa enhancer is the focus of multiple regulatory transcriptional pathways that impact its expression during normal hematopoiesis and potentially during myeloid transformation. PMID:25938608

  11. Food Additives and Hyperkinesis: A Controlled Double-Blind Experiment. (Includes NIE Staff Critique).

    ERIC Educational Resources Information Center

    Conners, C. Keith; And Others

    Fifteen hyperkinetic children (6-12 years old) were involved in a pilot study to test B. Feingold's hypothesis that hyperkinesis may be caused by artificial flavors and colors in food. Prior to treatment, parents and teachers completed bi-weekly questionnaires regarding each Ss' behavior both on medication (pretreatment period) and when medication…

  12. Additions to the knowledge of the land snails of Sabah (Malaysia, Borneo), including 48 new species

    PubMed Central

    Vermeulen, Jaap J.; Liew, Thor-Seng; Schilthuizen, Menno

    2015-01-01

    Abstract We present reviews of the Sabah (Malaysia, on the island of Borneo) species of the following problematical genera of land snails (Mollusca, Gastropoda): Acmella and Anaglyphula (Caenogastropoda: Assimineidae); Ditropopsis (Caenogastropoda: Cyclophoridae); Microcystina (Pulmonata: Ariophantidae); Philalanka and Thysanota (Pulmonata: Endodontidae); Kaliella, Rahula, (Pulmonata: Euconulidae); Trochomorpha and Geotrochus (Pulmonata: Trochomorphidae). Next to this, we describe new species in previously revised genera, such as Diplommatina (Diplommatinidae); Georissa (Hydrocenidae); as well as some new species of genera not revised previously, such as Japonia (Cyclophoridae); Durgella and Dyakia (Ariophantidae); Amphidromus, and Trachia (Camaenidae); Paralaoma (Punctidae); Curvella (Subulinidae). All descriptions are based on the morphology of the shells. We distinguish the following 48 new species: Acmella cyrtoglyphe, Acmella umbilicata, Acmella ovoidea, Acmella nana, Acmella subcancellata, Acmella striata, and Anaglyphula sauroderma (Assimineidae); Ditropopsis davisoni, Ditropopsis trachychilus, Ditropopsis constricta, Ditropopsis tyloacron, Ditropopsis cincta, and Japonia anceps (Cyclophoridae); Diplommatina bidentata and Diplommatina tylocheilos (Diplommatinidae); Georissa leucococca and Georissa nephrostoma (Hydrocenidae); Durgella densestriata, Dyakia chlorosoma, Microcystina microrhynchus, Microcystina callifera, Microcystina striatula, Microcystina planiuscula, and Microcystina physotrochus (Ariophantidae); Amphidromus psephos and Trachia serpentinitica (Camaenidae); Philalanka tambunanensis, Philalanka obscura, Philalanka anomphala, Philalanka rugulosa, and Philalanka malimgunung (Endodontidae); Kaliella eurytrochus, Kaliella sublaxa, Kaliella phacomorpha, Kaliella punctata, Kaliella microsoma, Rahula delopleura, (Euconulidae); Paralaoma angusta (Punctidae); Curvella hadrotes (Subulinidae); Trochomorpha trachus, Trochomorpha haptoderma, Trochomorpha thelecoryphe, Geotrochus oedobasis, Geotrochus spilokeiria, Geotrochus scolops, Geotrochus kitteli, Geotrochus subscalaris, and Geotrochus meristorhachis (Trochomorphidae). PMID:26692803

  13. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  14. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  15. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  16. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  17. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  18. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  19. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  20. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  1. Additive Manufacturing of Aerospace Propulsion Components

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  2. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  3. Additive Manufacturing for Affordable Rocket Engines

    NASA Technical Reports Server (NTRS)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch

  4. Including Conflict in Creative Writing.

    ERIC Educational Resources Information Center

    Litvin, Martin

    Conflict is the basis of all stories and thus should appear in some form in the first sentence. There are three kinds of conflict: people vs. people; people vs. nature; and people vs. themselves. Conflict must be repeated in all the various elements of the story's structure, including the plot, which is the plan of action telling what happens to…

  5. Family Living, Including Sex Education.

    ERIC Educational Resources Information Center

    Forlano, George

    This volume describes and evaluates 21 selected New York City Board of Education Umbrella Programs for the 1974-1975 school year. The programs include: (1) the parent resource center, (2) the teacher self-help program, (3) the East Harlem pre-kindergarten center, (4) the Brooklyn College volunteer tutoring program, (5) the parent education for…

  6. Cognitive Strategies in Mathematics, Part I: On Children's Strategies for Solving Simple Addition Problems.

    ERIC Educational Resources Information Center

    Braten, Ivar

    1998-01-01

    Demonstrates the merging of cognitive psychology, psychology of mathematics, and special education. Various models of children's addition strategies are reviewed and critiqued. Addition strategy with poor learners should be comprehensive and include interactions between strategies, knowledge, metacognition, motivation, and social factors. (MAK)

  7. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  8. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  9. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  10. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  11. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  12. Neoclassical Transport Including Collisional Nonlinearity

    SciTech Connect

    Candy, J.; Belli, E. A.

    2011-06-10

    In the standard {delta}f theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction {delta}f is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlueter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  13. Effects of the addition of a resistance training programme to a caloric restriction weight loss intervention on psychosocial factors in overweight and obese post-menopausal women: a Montreal Ottawa New Emerging Team study.

    PubMed

    Messier, Virginie; Rabasa-Lhoret, Rémi; Doucet, Eric; Brochu, Martin; Lavoie, Jean-Marc; Karelis, Antony; Prud'homme, Denis; Strychar, Irene

    2010-01-01

    The aim of this study was to examine the effects of the addition of a resistance training programme to a caloric restriction weight loss intervention on psychosocial profile. The study sample consisted of 137 overweight and obese post-menopausal women. Participants were randomized to a caloric restriction group and caloric restriction + resistance training group. Psychosocial, anthropometric, and metabolic variables were measured before and after the 6-month weight loss intervention. Both groups presented similar weight loss and there were no significant differences between the caloric restriction group and caloric restriction + resistance training group for changes in psychosocial profile. Thereafter, all participants were classified into quintiles based on the amount of weight loss. In all quintiles, women markedly improved body esteem and self-esteem, and decreased hunger and perceived risk for diabetes mellitus (P < 0.05). However, significant increases in dietary restraint were observed in quintiles 2-5 (> or =2.4 % body weight loss), decreases in disinhibition in quintiles 3-5 (> or =4.9 %), increases in self-efficacy in quintiles 3-5 (> or =4.9 %), and increases in health perceptions in quintile 5 (> or =11.1%). The results of this study do not support the hypothesis that the addition of a resistance training programme to a caloric restriction weight loss intervention has additional benefits on psychosocial profile. Overall, the significant improvements in the psychosocial profile observed were mostly accounted for by the degree of weight loss.

  14. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  15. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  16. Including Magnetostriction in Micromagnetic Models

    NASA Astrophysics Data System (ADS)

    Conbhuí, Pádraig Ó.; Williams, Wyn; Fabian, Karl; Nagy, Lesleis

    2016-04-01

    The magnetic anomalies that identify crustal spreading are predominantly recorded by basalts formed at the mid-ocean ridges, whose magnetic signals are dominated by iron-titanium-oxides (Fe3-xTixO4), so called "titanomagnetites", of which the Fe2.4Ti0.6O4 (TM60) phase is the most common. With sufficient quantities of titanium present, these minerals exhibit strong magnetostriction. To date, models of these grains in the pseudo-single domain (PSD) range have failed to accurately account for this effect. In particular, a popular analytic treatment provided by Kittel (1949) for describing the magnetostrictive energy as an effective increase of the anisotropy constant can produce unphysical strains for non-uniform magnetizations. I will present a rigorous approach based on work by Brown (1966) and by Kroner (1958) for including magnetostriction in micromagnetic codes which is suitable for modelling hysteresis loops and finding remanent states in the PSD regime. Preliminary results suggest the more rigorously defined micromagnetic models exhibit higher coercivities and extended single domain ranges when compared to more simplistic approaches.

  17. 75 FR 51444 - Procurement List Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... . SUPPLEMENTARY INFORMATION: Additions On 6/4/2010 (75 FR 31768-31769); 6/11/2010 (75 FR 33270-33271); 6/ 18/2010 (75 FR 34701-34702); and 6/25/2010 (75 FR 36363-36371), the Committee for Purchase From People Who Are... factors considered for this certification were: 1. The action will not result in any additional...

  18. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  19. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  20. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  1. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  2. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  3. Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

    SciTech Connect

    Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

    2015-12-08

    An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

  4. Surface texture measurement for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  5. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  6. Should Relational Aggression Be Included in DSM-V?

    ERIC Educational Resources Information Center

    Keenan, Kate; Coyne, Claire; Lahey, Benjamin B.

    2008-01-01

    The study examines whether relational aggression should be included in DSM-V disruptive behavior disorders. The results conclude that some additional information is gathered from assessing relational aggression but not enough to be included in DSM-V.

  7. Allergic and immunologic reactions to food additives.

    PubMed

    Gultekin, Fatih; Doguc, Duygu Kumbul

    2013-08-01

    For centuries, food additives have been used for flavouring, colouring and extension of the useful shelf life of food, as well as the promotion of food safety. During the last 20 years, the studies implicating the additives contained in foods and medicine as a causative factor of allergic reactions have been proliferated considerably. In this review, we aimed to overview all of the food additives which were approved to consume in EU and find out how common and serious allergic reactions come into existence following the consuming of food additives.

  8. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  9. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in...

  10. 19 CFR 134.2 - Additional duties.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... this part shall be subject to additional duties of 10 percent of the final appraised value unless... container) to indicate the English name of the country of origin of the article or to include words...

  11. Models of bovine babesiosis including juvenile cattle.

    PubMed

    Saad-Roy, C M; Shuai, Zhisheng; van den Driessche, P

    2015-03-01

    Bovine Babesiosis in cattle is caused by the transmission of protozoa of Babesia spp. by ticks as vectors. Juvenile cattle (<9 months of age) have resistance to Bovine Babesiosis, rarely show symptoms, and acquire immunity upon recovery. Susceptibility to the disease varies between breeds of cattle. Models of the dynamics of Bovine Babesiosis transmitted by the cattle tick that include these factors are formulated as systems of ordinary differential equations. Basic reproduction numbers are calculated, and it is proved that if these numbers are below the threshold value of one, then Bovine Babesiosis dies out. However, above the threshold number of one, the disease may approach an endemic state. In this case, control measures are suggested by determining target reproduction numbers. The percentage of a particular population (for example, the adult bovine population) needed to be controlled to eradicate the disease is evaluated numerically using Columbia data from the literature. PMID:25715822

  12. 78 FR 22209 - Additional Synthetic Drug Testing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... COMMISSION 10 CFR Part 26 Additional Synthetic Drug Testing AGENCY: Nuclear Regulatory Commission. ACTION... NRC amend its Fitness for Duty program regulations to amend drug testing requirements to test for additional synthetic drugs currently not included in the regulations. The NRC determined that the...

  13. Asthma and anaphylactoid reactions to food additives.

    PubMed Central

    Tarlo, S. M.; Sussman, G. L.

    1993-01-01

    Presumed allergic reactions to hidden food additives are both controversial and important. Clinical manifestations include asthma, urticaria, angioedema, and anaphylactic-anaphylactoid events. Most adverse reactions are caused by just a few additives, such as sulfites and monosodium glutamate. Diagnosis is suspected from the history and confirmed by specific challenge. The treatment is specific avoidance. PMID:8499792

  14. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate.

  15. Critical point anomalies include expansion shock waves

    SciTech Connect

    Nannan, N. R.; Guardone, A.; Colonna, P.

    2014-02-15

    From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

  16. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  17. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  18. Sugar metabolism, an additional virulence factor in enterobacteria.

    PubMed

    Le Bouguénec, Chantal; Schouler, Catherine

    2011-01-01

    Enterobacteria display a high level of flexibility in their fermentative metabolism. Biotyping assays have thus been developed to discriminate between clinical isolates. Each biotype uses one or more sugars more efficiently than the others. Recent studies show links between sugar metabolism and virulence in enterobacteria. In particular, mechanisms of carbohydrate utilization differ substantially between pathogenic and commensal E. coli strains. We are now starting to gain insight into the importance of this variability in metabolic function. Studies using various animal models of intestinal colonization showed that the presence of the fos and deoK loci involved in the metabolism of short-chain fructoligosaccharides and deoxyribose, respectively, help avian and human pathogenic E. coli to outcompete with the normal flora and colonize the intestine. Both PTS and non-PTS sugar transporters have been found to modulate virulence of extraintestinal pathogenic E. coli strains. The vpe, GimA, and aec35-37 loci contribute to bacterial virulence in vivo during experimental septicemia and urinary tract infection, meningitis, and colibacillosis, respectively. However, in most cases, the sugars metabolized, and the precise role of their utilization in the expression of bacterial virulence is still unknown. The massive development of powerful analytical methods over recent years will allow establishing the knowledge of the metabolic basis of bacterial pathogenesis that appears to be the next challenge in the field of infectious diseases.

  19. 75 FR 58366 - Procurement List Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-24

    ... INFORMATION: Additions On 6/11/2010 (75 FR 33270-33271) and 7/16/2010 (75 FR 41451), the Committee for... entities. The major factors considered for this certification were: 1. The action will not result in any.../Location: Transcription Service, US Army, US Army War College, Carlisle, PA (Offsite: 5590 Derry...

  20. Effect of additives on protein aggregation.

    PubMed

    Hamada, Hiroyuki; Arakawa, Tsutomu; Shiraki, Kentaro

    2009-06-01

    This paper overviews solution additives that affect protein stability and aggregation during refolding, heating, and freezing processes. Solution additives are mainly grouped into two classes, i.e., protein denaturants and stabilizers. The former includes guanidine, urea, strong ionic detergents, and certain chaotropic salts; the latter includes certain amino acids, sugars, polyhydric alcohols, osmolytes, and kosmotropic salts. However, there are solution additives that are not unambiguously placed into these two classes, including arginine, certain divalent cation salts (e.g., MgCl(2)) and certain polyhydric alcohols (e.g., ethylene glycol). Certain non-ionic or non-detergent surfactants, ionic liquids, amino acid derivatives, polyamines, and certain amphiphilic polymers may belong to this class. They have marginal effects on protein structure and stability, but are able to disrupt protein interactions. Information on additives that do not catalyze chemical reactions nor affect protein functions helps us to design protein solutions for increased stability or reduced aggregation. PMID:19519415

  1. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    NASA Astrophysics Data System (ADS)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ), time of incubation, wavelength of measurement, addition of salts, and addition of detergent. In these independent projects, students sometimes discover ways to improve the methodology for the assays, and these improvements are incorporated into the suggested procedures for the rest of the semester. The results of this project are written up as a short paper in a style appropriate for a rapid communication in a scientific journal. The papers go through a round of peer review and revision. Ion-Exchange Chromatography Once each group has decided on a project and discussed the details with the instructor, they prepare their own buffers and equilibrate the resins. DEAE-Sephacel and CM-Sepharose, both from Pharmacia/LKB (Piscataway, NJ) are supplied, about 20 mL of packed resin for each egg-white preparation. (These resins can be regenerated and reused many times.) Each group uses one egg white for the entire purification project. The egg white is filtered through one layer of cheesecloth and diluted 5-fold with the starting buffer. The first step is done batchwise because of the viscosity of the sample. The diluted egg white is mixed with the resin for approximately 15 min, then centrifuged at 1500 μ g for 15 min. The supernatant, containing those proteins not adsorbed to the resin, is decanted. Subsequent washing and elution can then be carried out batchwise or by transferring to a column [1.5 - 20 cm Econocolumns (BioRad)]. The options for recovery of the enzyme from the CM resin include a batch or column method, elution by change in pH or ionic strength, and gradient or stepwise elution. Those carrying out elutions from a column use an automatic fraction collector; gradient formers are available for those who choose to elute with a linear salt gradient. When elution is carried out by a change in pH, it should be noted that lysozyme may precipitate near its isoelectric point, especially at low ionic strength. SDS - polyacrylamide gel electrophoresis is used to monitor

  2. Kinetics of the reaction of the heaviest hydrogen atom with H2, the 4Heμ + H2 → 4HeμH + H reaction: experiments, accurate quantal calculations, and variational transition state theory, including kinetic isotope effects for a factor of 36.1 in isotopic mass.

    PubMed

    Fleming, Donald G; Arseneau, Donald J; Sukhorukov, Oleksandr; Brewer, Jess H; Mielke, Steven L; Truhlar, Donald G; Schatz, George C; Garrett, Bruce C; Peterson, Kirk A

    2011-11-14

    The neutral muonic helium atom (4)Heμ, in which one of the electrons of He is replaced by a negative muon, may be effectively regarded as the heaviest isotope of the hydrogen atom, with a mass of 4.115 amu. We report details of the first muon spin rotation (μSR) measurements of the chemical reaction rate constant of (4)Heμ with molecular hydrogen, (4)Heμ + H(2) → (4)HeμH + H, at temperatures of 295.5, 405, and 500 K, as well as a μSR measurement of the hyperfine coupling constant of muonic He at high pressures. The experimental rate constants, k(Heμ), are compared with the predictions of accurate quantum mechanical (QM) dynamics calculations carried out on a well converged Born-Huang (BH) potential energy surface, based on complete configuration interaction calculations and including a Born-Oppenheimer diagonal correction. At the two highest measured temperatures the agreement between the quantum theory and experiment is good to excellent, well within experimental uncertainties that include an estimate of possible systematic error, but at 295.5 K the quantum calculations for k(Heμ) are below the experimental value by 2.1 times the experimental uncertainty estimates. Possible reasons for this discrepancy are discussed. Variational transition state theory calculations with multidimensional tunneling have also been carried out for k(Heμ) on the BH surface, and they agree with the accurate QM rate constants to within 30% over a wider temperature range of 200-1000 K. Comparisons between theory and experiment are also presented for the rate constants for both the D + H(2) and Mu + H(2) reactions in a novel study of kinetic isotope effects for the H + H(2) reactions over a factor of 36.1 in isotopic mass of the atomic reactant.

  3. Analysis of Smart Composite Structures Including Debonding

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1997-01-01

    Smart composite structures with distributed sensors and actuators have the capability to actively respond to a changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept due to the static and dynamic control capabilities. Essential to the implementation of these smart composites are the development of accurate and efficient modeling techniques and experimental validation. This research addresses each of these important topics. A refined higher order theory is developed to model composite structures with surface bonded or embedded piezoelectric transducers. These transducers are used as both sensors and actuators for closed loop control. The theory accurately captures the transverse shear deformation through the thickness of the smart composite laminate while satisfying stress free boundary conditions on the free surfaces. The theory is extended to include the effect of debonding at the actuator-laminate interface. The developed analytical model is implemented using the finite element method utilizing an induced strain approach for computational efficiency. This allows general laminate geometries and boundary conditions to be analyzed. The state space control equations are developed to allow flexibility in the design of the control system. Circuit concepts are also discussed. Static and dynamic results of smart composite structures, obtained using the higher order theory, are correlated with available analytical data. Comparisons, including debonded laminates, are also made with a general purpose finite element code and available experimental data. Overall, very good agreement is observed. Convergence of the finite element implementation of the higher order theory is shown with exact solutions. Additional results demonstrate the utility of the developed theory to study piezoelectric actuation of composite

  4. [Critical of the additive model of the randomized controlled trial].

    PubMed

    Boussageon, Rémy; Gueyffier, François; Bejan-Angoulvant, Theodora; Felden-Dominiak, Géraldine

    2008-01-01

    Randomized, double-blind, placebo-controlled clinical trials are currently the best way to demonstrate the clinical effectiveness of drugs. Its methodology relies on the method of difference (John Stuart Mill), through which the observed difference between two groups (drug vs placebo) can be attributed to the pharmacological effect of the drug being tested. However, this additive model can be questioned in the event of statistical interactions between the pharmacological and the placebo effects. Evidence in different domains has shown that the placebo effect can influence the effect of the active principle. This article evaluates the methodological, clinical and epistemological consequences of this phenomenon. Topics treated include extrapolating results, accounting for heterogeneous results, demonstrating the existence of several factors in the placebo effect, the necessity to take these factors into account for given symptoms or pathologies, as well as the problem of the "specific" effect.

  5. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  6. Fermentation Quality and Additives: A Case of Rice Straw Silage.

    PubMed

    Oladosu, Yusuff; Rafii, Mohd Y; Abdullah, Norhani; Magaji, Usman; Hussin, Ghazali; Ramli, Asfaliza; Miah, Gous

    2016-01-01

    Rice cultivation generates large amount of crop residues of which only 20% are utilized for industrial and domestic purposes. In most developing countries especially southeast Asia, rice straw is used as part of feeding ingredients for the ruminants. However, due to its low protein content and high level of lignin and silica, there is limitation to its digestibility and nutritional value. To utilize this crop residue judiciously, there is a need for improvement of its nutritive value to promote its utilization through ensiling. Understanding the fundamental principle of ensiling is a prerequisite for successful silage product. Prominent factors influencing quality of silage product include water soluble carbohydrates, natural microbial population, and harvesting conditions of the forage. Additives are used to control the fermentation processes to enhance nutrient recovery and improve silage stability. This review emphasizes some practical aspects of silage processing and the use of additives for improvement of fermentation quality of rice straw. PMID:27429981

  7. Fermentation Quality and Additives: A Case of Rice Straw Silage.

    PubMed

    Oladosu, Yusuff; Rafii, Mohd Y; Abdullah, Norhani; Magaji, Usman; Hussin, Ghazali; Ramli, Asfaliza; Miah, Gous

    2016-01-01

    Rice cultivation generates large amount of crop residues of which only 20% are utilized for industrial and domestic purposes. In most developing countries especially southeast Asia, rice straw is used as part of feeding ingredients for the ruminants. However, due to its low protein content and high level of lignin and silica, there is limitation to its digestibility and nutritional value. To utilize this crop residue judiciously, there is a need for improvement of its nutritive value to promote its utilization through ensiling. Understanding the fundamental principle of ensiling is a prerequisite for successful silage product. Prominent factors influencing quality of silage product include water soluble carbohydrates, natural microbial population, and harvesting conditions of the forage. Additives are used to control the fermentation processes to enhance nutrient recovery and improve silage stability. This review emphasizes some practical aspects of silage processing and the use of additives for improvement of fermentation quality of rice straw.

  8. Fermentation Quality and Additives: A Case of Rice Straw Silage

    PubMed Central

    Oladosu, Yusuff; Magaji, Usman; Hussin, Ghazali; Ramli, Asfaliza; Miah, Gous

    2016-01-01

    Rice cultivation generates large amount of crop residues of which only 20% are utilized for industrial and domestic purposes. In most developing countries especially southeast Asia, rice straw is used as part of feeding ingredients for the ruminants. However, due to its low protein content and high level of lignin and silica, there is limitation to its digestibility and nutritional value. To utilize this crop residue judiciously, there is a need for improvement of its nutritive value to promote its utilization through ensiling. Understanding the fundamental principle of ensiling is a prerequisite for successful silage product. Prominent factors influencing quality of silage product include water soluble carbohydrates, natural microbial population, and harvesting conditions of the forage. Additives are used to control the fermentation processes to enhance nutrient recovery and improve silage stability. This review emphasizes some practical aspects of silage processing and the use of additives for improvement of fermentation quality of rice straw. PMID:27429981

  9. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  10. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  11. Improving the Accuracy of Stamping Analyses Including Springback Deformations

    NASA Astrophysics Data System (ADS)

    Firat, Mehmet; Karadeniz, Erdal; Yenice, Mustafa; Kaya, Mesut

    2013-02-01

    An accurate prediction of sheet metal deformation including springback is one of the main issues in an efficient finite element (FE) simulation in automotive and stamping industries. Considering tooling design for newer class of high-strength steels, in particular, this requirement became an important aspect for springback compensation practices today. The sheet deformation modeling accounting Bauschinger effect is considered to be a key factor affecting the accuracy of FE simulations in this context. In this article, a rate-independent cyclic plasticity model is presented and implemented into LS-Dyna software for an accurate modeling of sheet metal deformation in stamping simulations. The proposed model uses Hill's orthotropic yield surface in the description of yield loci of planar and transversely anisotropic sheets. The strain-hardening behavior is calculated based on an additive backstress form of the nonlinear kinematic hardening rule. The proposed model is applied in stamping simulations of a dual-phase steel automotive part, and comparisons are presented in terms of part strain and thickness distributions calculated with isotropic plasticity and the proposed model. It is observed that both models produce similar plastic strain and thickness distributions; however, there appeared to be considerable differences in computed springback deformations. Part shapes computed with both plasticity models were evaluated with surface scanning of manufactured parts. A comparison of FE computed geometries with manufactured parts proved the improved performance of proposed model over isotropic plasticity for this particular stamping application.

  12. Lubricating oil compositions containing organometallic additives

    SciTech Connect

    Landry, J.F.; Croudance, M.C.; On, H.P.; Shen, S.Y.

    1987-04-07

    This invention provides novel lubricating oil compositions comprising an organometallic additive, including a metal selected from Groups I, Ib, and VIII of the Periodic System of Elements, e.g. Na, K, Cu, Co, Ni or Fe, chelated with the reaction product of formaldehyde, an amino acid and a phenol, dissolved in a lubricating oil. Depending on the choice of the metal, the above organometallic additive imparts rust inhibition, sludge dispersant, wear reduction and anti-oxidant properties to the lubricating oil compositions.

  13. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2011-05-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  14. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2010-12-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  15. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  16. Environmental Sustainability - Including Land and Water Use

    EPA Science Inventory

    Assessments of environmental sustainability can be conducted in many ways with one of the most quantitative methods including Life Cycle Impact Assessment (LCIA). While historically LCIA has included a comprehensive list of impact categories including: ozone depletion, global c...

  17. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  18. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  19. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    SciTech Connect

    C. Tsang

    2004-09-22

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  20. The Pill vs. the Sword: Additional Considerations

    PubMed Central

    Lottes, Ilsa L.

    2015-01-01

    In this paper, I present additional information for policy-makers and researchers to consider in response to the view proposed by Potts et al that "the pill is mightier than the sword." I identify states with both high rates of terrorism and a youth bulge and discuss correlates of both these societal characteristics. The research examined supports the view that factors other than access to family planning are more important in facilitating terrorism. PMID:26673473

  1. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  2. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  3. Additive empirical force field for hexopyranose monosaccharides

    PubMed Central

    Guvench, Olgun; Greene, Shannon N.; Kamath, Ganesh; Brady, John W.; Venable, Richard M.; Pastor, Richard W.; MacKerell, Alexander D.

    2010-01-01

    We present an all-atom additive empirical force field for the hexopyranose monosaccharide form of glucose and its diastereomers allose, altrose, galactose, gulose, idose, mannose, and talose. The model is developed to be consistent with the CHARMM all-atom biomolecular force fields, and the same parameters are used for all diastereomers, including both the α- and β-anomers of each monosaccharide. The force field is developed in a hierarchical manner and reproduces the gas-phase and condensed-phase properties of small-molecule model compounds corresponding to fragments of pyranose monosaccharides. The resultant parameters are transferred to the full pyranose monosaccharides and additional parameter development is done to achieve a complete hexopyranose monosaccharide force field. Parametrization target data include vibrational frequencies, crystal geometries, solute – water interaction energies, molecular volumes, heats of vaporization, and conformational energies, including those for over 1800 monosaccharide conformations at the MP2/cc-pVTZ//MP2/6-31G(d) level of theory. Though not targeted during parametrization, free energies of aqueous solvation for the model compounds compare favorably with experimental values. Also well-reproduced are monosaccharide crystal unit cell dimensions and ring pucker, densities of concentrated aqueous glucose systems, and the thermodynamic and dynamic properties of the exocyclic torsion in dilute aqueous systems. The new parameter set expands the CHARMM additive force field to allow for simulation of heterogeneous systems that include hexopyranose monosaccharides in addition to proteins, nucleic acids, and lipids. PMID:18470966

  4. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Kennedy. (b) The inclusion of artifacts in the scope of the term assassination record is understood to... regulation. (c) Whenever artifacts are included in the JFK Assassination Records Collection, it shall be... materials depicting the artifacts. Additional display of or examination by the public of artifacts in...

  5. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  6. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  7. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  8. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  9. English as an Additional Language: Changing Perspectives.

    ERIC Educational Resources Information Center

    Leung, Constant, Ed.; Cable, Carrie, Ed.

    This volume highlights the language and learning needs of pupils with English as an additional language in the United Kingdom. It includes chapters by British teachers and researchers working in this field. The book addresses a number of issues of interest to practitioners, scholars, teacher educators, and policy makers. Each chapter is prefaced…

  10. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  11. Exposure factors handbook

    SciTech Connect

    Konz, J.J.; Lisi, K.; Friebele, E.; Dixon, D.A.

    1989-07-01

    The document provides a summary of the available data on various factors used in assessing human exposure including drinking-water consumption, consumption rates of broad classes of food including fruits, vegetables, beef, dairy products, and fish; soil ingestion; inhalation rate; skin area; lifetime; activity patterns; and body weight. Additionally, a number of specific exposure scenarios are identified with recommendations for default values to use when site-specific data are not available. The basic equations using these parameters to calculate exposure levels are also presented for each scenario. Default values are presented as ranges from typical to reasonable worst case and as frequency distributions where appropriate data were available. Finally, procedures for assessing the uncertainties in exposure assessments are also presented with illustrative examples. These procedures include qualitative and quantitative methods such as Monte Carlo and sensitivity analysis.

  12. The effect of including a monetary motive item on the gambling motives questionnaire in a sample of moderate gamblers.

    PubMed

    Dechant, Kristianne; Ellery, Michael

    2011-06-01

    This study explored the factor structure of the Gambling Motives Questionnaire (GMQ) with a large stratified sample of 839 moderate gamblers (49% female; median age category = 45-54 years) and examined the effect of including a monetary motive item on GMQ factor structure. Participants responded to a telephone survey in which they were asked how often they gamble for each of 16 reasons, including the 15 GMQ motives and an additional motive: "to win money". Exploratory principal components analysis of the 15 GMQ items revealed three factors, together accounting for 49.04% of the total variance in GMQ scores. The factors tapped enhancement, coping and social motives, although only the coping subscale displayed strong internal consistency. A second exploratory principal components analysis of the 15 GMQ items and the monetary motive item continued to reveal three factors tapping enhancement, coping and social motives. The addition of the monetary motive item strengthened the independence of the components and dramatically improved the internal consistency of the enhancement factor. The results suggest that the psychometric properties of the GMQ, when used with a population of moderate gamblers, may be considerably strengthened with only minor modifications. PMID:20496161

  13. Teebi hypertelorism syndrome: additional cases.

    PubMed

    Machado-Paula, Ligiane Alves; Guion-Almeida, Maria Leine

    2003-03-01

    We report on two unrelated Brazilian boys who have craniofacial and digital anomalies resembling those reported with Teebi hypertelorism syndrome. Additional features such as cleft lip and palate, large uvula, atypical chin and abnormal scapulae were observed.

  14. Evaluation of certain food additives and contaminants.

    PubMed

    2002-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (diacetyltartaric and fatty acid esters of glycerol, quillaia extracts, invertase from Saccharomyces cerevisiae, beta-carotene from Blakeslea trispora, curcumin, phosphates, diphosphates and polyphosphates, hydrogenated poly-1-decene, natamycin, D-tagatose, carrageenan, processed Eucheuma seaweed, curdlan, acetylated oxidized starch, alpha-cyclodextrin and sodium sulfate), flavouring agents and contaminants (3-chloro-1,2-propanediol, 1,3-dichloro-2-propanol, and a large number of polychlorinated dibenzodioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired. PMID:12564044

  15. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  16. Evaluation of certain food additives and contaminants.

    PubMed

    2001-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives and contaminants (including flavouring agents), and the establishment and revision of specifications. A summary follows of the Committee's evaluations of toxicological data on various specific food additives (furfural, paprika oleoresin, caramel colour II, cochineal extract, carmines, aspartame-acesulfame salt, D-tagatose, benzoyl peroxide, nitrous oxide, stearyl tartrate and trehalose), flavouring agents and contaminants (cadmium and tin), and of intake data on calcium from calcium salts of food additives. Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired.

  17. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  18. An update on inflammatory arthropathies including pharmacologic management and preoperative considerations.

    PubMed

    Regule, David

    2010-04-01

    This article provides an update and overview to the clinical presentations of inflammatory arthropathies. Subtleties to clinical presentations are discussed. Clues are presented which helps the reader arrive at more precise diagnostic labeling. Additionally, pharmacotherapy will be discussed, including precautions in considering the best therapy for the patient with suspected inflammatory, autoimmune, degenerative or neuropathic pain conditions. Finally, preoperative evaluations, management and risks of this patient population are reviewed. Emphasis will be on whether "cardiac clearance" should be requested based on an easy to use algorithm of cardiac risk factors. Finally recommendations based on recent literature of whether immunosuppressants should be withheld preoperatively.

  19. 78 FR 77666 - Notice and Request for Public Comment on State Requests To Include Additional Proof-of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ... Instructions on the National Mail Voter Registration Form AGENCY: U.S. Election Assistance Commission (EAC..., and Georgia on the National Mail Voter Registration Form (``Federal Form''). Those States have... requirements that, as a precondition to registering to vote in Federal elections, voter registration...

  20. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... based on the weight of evidence showing that regulation under 40 CFR part 273 is appropriate for the... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Petitions to amend 40 CFR part 273 to... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  1. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... based on the weight of evidence showing that regulation under 40 CFR part 273 is appropriate for the... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Petitions to amend 40 CFR part 273 to... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  2. 78 FR 35929 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-14

    ... decision identifying water quality limited segments and associated pollutants in Indiana to be listed... pollution controls are not stringent enough to attain or maintain state water quality standards and for... certain water quality limited segments and associated pollutants (Table 1 in Appendix A1 of EPA's...

  3. 78 FR 56695 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-13

    ... EPA's proposed decision identifying water quality limited segments and associated pollutants in Indiana to be listed pursuant to the Clean Water Act Section 303(d)(2), and requests public comment. For... Under the Clean Water Act AGENCY: Environmental Protection Agency (EPA). ACTION: Reopening of...

  4. Uranium hydrogeochemical and stream sediment reconnasissance of the Trinidad NTMS Quadrangle, Colorado, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-05-01

    Uranium and other elemental data resulting from the Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) of the Trinidad National Topographic Map Series (NTMS) quadrangle, Colorado, by the Los Alamos Scientific Laboratory (LASL) are reported herein. This study was conducted as part of the United States Department of Energy's National Uranium Resource Evaluation (NURE), which is designed to provide improved estimates of the availability and economics of nuclear fuel resources and to make available to industry information for use in exploration and development of uranium resources. The HSSR data will ultimately be integrated with other NURE data (e.g., airborne radiometric surveys and geological investigations) to complete the entire NURE program. This report is a supplement to the HSSR uranium evaluation report for the Trinidad quadrange (Morris et al, 1978), which presented the field and uranium data for the 1060 water and 1240 sediment samples collected from 1768 locations in the quadrangle. The earlier report contains an evaluation of the uranium concentrations of the samples as well as descriptions of the geology, hydrology, climate, and uranium occurrences of the quadrange. This supplement presents the sediment field and uranium data again and the analyses of 42 other elements in the sediments. All uranium samples were redetermined by delayed-neutron counting (DNC) when the sediment samples were analyzed for 31 elements by neutron activation. For 99.6% of the sediment samples analyzed, the differences between the uranium contents first determined (Morris et al, 1978) and the analyses reported herein are less than 10%.

  5. Article Including Environmental Barrier Coating System

    NASA Technical Reports Server (NTRS)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  6. The benefit of additional oviposition targets for a polyphagous butterfly.

    PubMed

    Johansson, Josefin; Bergström, Anders; Janz, Niklas

    2007-01-01

    While the reasons for the prevalence of specialists over generalists among herbivorous insects have been at the focus of much interest, less effort has been put into understanding the polyphagous exceptions. Recent studies have suggested that these exceptions may be important for insect diversification, which calls for a better understanding of the potential factors that can lead to an increased host plant repertoire. Females of the Nymphalid butterfly, Polygonia c-album, were used to test if egg output and/or likelihood of finding a host increased with the addition of a secondary host. There was no effect of prior eggs on the host for willingness to oviposit on a plant. The main experiments were conducted both in small laboratory cages and in large outdoor experimental arenas. No positive effect was found when another oviposition target was added in small cages in the laboratory. On the other hand, in the outdoor arenas the females more often found a host to oviposit on and had a higher egg output when they had access to an additional host, even though the second host was lower in their preference hierarchy. The difference between these experiments was attributed to searching for acceptable host plants within a patch, a factor that was included in the large cages but not in the small. When host availability is limited, adding oviposition targets can potentially act to counterbalance specialization and thus favor the evolution of generalization.

  7. Accelerating Industrial Adoption of Metal Additive Manufacturing Technology

    NASA Astrophysics Data System (ADS)

    Vartanian, Kenneth; McDonald, Tom

    2016-03-01

    While metal additive manufacturing (AM) technology has clear benefits, there are still factors preventing its adoption by industry. These factors include the high cost of metal AM systems, the difficulty for machinists to learn and operate metal AM machines, the long approval process for part qualification/certification, and the need for better process controls; however, the high AM system cost is the main barrier deterring adoption. In this paper, we will discuss an America Makes-funded program to reduce AM system cost by combining metal AM technology with conventional computerized numerical controlled (CNC) machine tools. Information will be provided on how an Optomec-led team retrofitted a legacy CNC vertical mill with laser engineered net shaping (LENS®—LENS is a registered trademark of Sandia National Labs) AM technology, dramatically lowering deployment cost. The upgraded system, dubbed LENS Hybrid Vertical Mill, enables metal additive and subtractive operations to be performed on the same machine tool and even on the same part. Information on the LENS Hybrid system architecture, learnings from initial system deployment and continuing development work will also be provided to help guide further development activities within the materials community.

  8. Extension of the standard addition method by blank addition.

    PubMed

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set.

  9. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  10. Extension of the standard addition method by blank addition

    PubMed Central

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set. PMID:26844210

  11. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  12. Clinical effects of sulphite additives.

    PubMed

    Vally, H; Misso, N L A; Madan, V

    2009-11-01

    Sulphites are widely used as preservative and antioxidant additives in the food and pharmaceutical industries. Topical, oral or parenteral exposure to sulphites has been reported to induce a range of adverse clinical effects in sensitive individuals, ranging from dermatitis, urticaria, flushing, hypotension, abdominal pain and diarrhoea to life-threatening anaphylactic and asthmatic reactions. Exposure to the sulphites arises mainly from the consumption of foods and drinks that contain these additives; however, exposure may also occur through the use of pharmaceutical products, as well as in occupational settings. While contact sensitivity to sulphite additives in topical medications is increasingly being recognized, skin reactions also occur after ingestion of or parenteral exposure to sulphites. Most studies report a 3-10% prevalence of sulphite sensitivity among asthmatic subjects following ingestion of these additives. However, the severity of these reactions varies, and steroid-dependent asthmatics, those with marked airway hyperresponsiveness, and children with chronic asthma, appear to be at greater risk. In addition to episodic and acute symptoms, sulphites may also contribute to chronic skin and respiratory symptoms. To date, the mechanisms underlying sulphite sensitivity remain unclear, although a number of potential mechanisms have been proposed. Physicians should be aware of the range of clinical manifestations of sulphite sensitivity, as well as the potential sources of exposure. Minor modifications to diet or behaviour lead to excellent clinical outcomes for sulphite-sensitive individuals.

  13. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  14. Postmarketing surveillance of food additives.

    PubMed

    Butchko, H H; Tschanz, C; Kotsonis, F N

    1994-08-01

    Postmarketing surveillance of consumption and of anecdotal reports of adverse health effects has been recognized by a number of regulatory authorities as a potentially useful method to provide further assurance of the safety of new food additives. Surveillance of consumption is used to estimate more reliably actual consumption levels relative to the acceptable daily intake of a food additive. Surveillance of anecdotal reports of adverse health effects is used to determine the presence of infrequent idiosyncratic responses that may not be predictable from premarket evaluations. The high-intensity sweetner, aspartame, is a food additive that has been the subject of extensive evaluation during the postmarketing period and is thus used as an example to discuss postmarketing surveillance.

  15. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  16. Composite Pressure Vessel Including Crack Arresting Barrier

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas K. (Inventor)

    2013-01-01

    A pressure vessel includes a ported fitting having an annular flange formed on an end thereof and a tank that envelopes the annular flange. A crack arresting barrier is bonded to and forming a lining of the tank within the outer surface thereof. The crack arresting barrier includes a cured resin having a post-curing ductility rating of at least approximately 60% through the cured resin, and further includes randomly-oriented fibers positioned in and throughout the cured resin.

  17. Evaluation of certain food additives and contaminants.

    PubMed

    2004-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (alpha-amylase from Bacillus lichenformis containing a genetically engineered alpha-amylase gene from B. licheniformis, annatto extracts, curcumin, diacetyl and fatty acid esters of glycerol, D-tagatose, laccase from Myceliophthora thermophila expressed in Aspergillus oryzae, mixed xylanase, beta-glucanase enzyme preparation produced by a strain of Humicola insolens, neotame, polyvinyl alcohol, quillaia extracts and xylanase from Thermomyces lanuginosus expressed in Fusarium venenatum), flavouring agents, a nutritional source of iron (ferrous glycinate, processed with citric acid), a disinfectant for drinking-water (sodium dichloroisocyanurate) and contaminants (cadmium and methylmercury). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives, recommendations on the flavouring agents considered, and tolerable intakes of the contaminants considered, changes in the status of specifications and further information requested or desired. PMID:15354533

  18. Evaluation of certain food additives and contaminants.

    PubMed

    2004-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (alpha-amylase from Bacillus lichenformis containing a genetically engineered alpha-amylase gene from B. licheniformis, annatto extracts, curcumin, diacetyl and fatty acid esters of glycerol, D-tagatose, laccase from Myceliophthora thermophila expressed in Aspergillus oryzae, mixed xylanase, beta-glucanase enzyme preparation produced by a strain of Humicola insolens, neotame, polyvinyl alcohol, quillaia extracts and xylanase from Thermomyces lanuginosus expressed in Fusarium venenatum), flavouring agents, a nutritional source of iron (ferrous glycinate, processed with citric acid), a disinfectant for drinking-water (sodium dichloroisocyanurate) and contaminants (cadmium and methylmercury). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives, recommendations on the flavouring agents considered, and tolerable intakes of the contaminants considered, changes in the status of specifications and further information requested or desired.

  19. The grays of medical device color additives.

    PubMed

    Seidman, Brenda

    2014-01-01

    The United States' medical device color additive regulations are unknown to some, and confusing to many. This article reviews statutory language on color additives in the Federal Food, Drug, and Cosmetic Act (FFDCA), as amended, including the Delaney Clause on carcinogenicity; color additive regulatory language as it relates to medical devices in Title 21 of the Code of Federal Regulations (C.F.R.), Parts 70-82; reports on the Food and Drug Administration's (FDA's) likely current and historical practices in dealing with color additives in medical devices; and speculates on what may have given rise to decades of seemingly ad hoc color additives practices, which may now be difficult to reconstruct and satisfactorily modify. Also addressed is the Center for Devices and Radiological Health's (CDRH's) recent publicly-vetted approach to color additives in Section 7 of its April 2013 draft guidance, Use of International Standard ISO-10993, "Biological Evaluation of Medical Devices Part 1: Evaluation and Testing," which the author concludes is a change in the right direction, but which, at least in its current draft form, is not a fix to the CDRH's color additives dilemma. Lastly, the article suggests what the CDRH might consider in further developing a new approach to color additives. Such an approach would treat color additives as if they were any other potentially toxic group of chemicals, and could be fashioned in such a way that the CDRH could still satisfy the broad aspects of Congressional color additives mandates, and.yet be consistent with ISO 10993. In doing this, the CDRH would need to recommend a more directed use of its Quality System Regulation, 21 C.F.R. Part 820, for material and vendor qualification and validation in general; approach Congress for needed statutory changes; or make administrative changes. In order for any approach to be successful, whether it is a new twist on past practices, or an entirely new path forward, the FDA must, to the best of its

  20. Lubricating additive for drilling muds

    SciTech Connect

    Gutierrez, A.; Brois, S. J.; Brownawell, D. W.; Walker, T. O.

    1985-01-01

    Aqueous drilling fluids containing a minor amount of an additive composition featuring oxazolines of C/sub 1/-C/sub 30/ alkylthioglycolic acid. Such fluids are especially useful where reduced torque drilling fluids are needed. Another embodiment of this invention relates to a method of drilling utilizing the above-described fluids.

  1. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  2. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  3. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  4. Out of bounds additive manufacturing

    DOE PAGES

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  5. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  6. Additional Financial Resources for Education.

    ERIC Educational Resources Information Center

    Hubbard, Ben C.

    This paper discusses the continuing need for additional educational funds and suggests that the only way to gain these funds is through concerted and persistent political efforts by supporters of education at both the federal and state levels. The author first points out that for many reasons declining enrollment may not decrease operating costs…

  7. Ovarian cancer: etiology, risk factors, and epidemiology.

    PubMed

    Hunn, Jessica; Rodriguez, Gustavo C

    2012-03-01

    Little is known regarding the early aspects of ovarian carcinogenesis. As a consequence, the identification of women at risk for the disease is based primarily on clinical grounds, with family history being the most important risk factor. In this review, we will discuss the various hypotheses regarding ovarian etiology and pathogenesis. In addition, we will discuss the epidemiology of ovarian cancer, including hereditary, reproductive, hormonal, inflammatory, dietary, surgical, and geographic factors that influence ovarian cancer risk.

  8. Global response patterns of terrestrial plant species to nitrogen addition.

    PubMed

    Xia, Jianyang; Wan, Shiqiang

    2008-07-01

    Better understanding of the responses of terrestrial plant species under global nitrogen (N) enrichment is critical for projection of changes in structure, functioning, and service of terrestrial ecosystems. Here, a meta-analysis of data from 304 studies was carried out to reveal the general response patterns of terrestrial plant species to the addition of N. Across 456 terrestrial plant species included in the analysis, biomass and N concentration were increased by 53.6 and 28.5%, respectively, under N enrichment. However, the N responses were dependent upon plant functional types, with significantly greater biomass increases in herbaceous than in woody species. Stimulation of plant biomass by the addition of N was enhanced when other resources were improved. In addition, the N responses of terrestrial plants decreased with increasing latitude and increased with annual precipitation. Dependence of the N responses of terrestrial plants on biological realms, functional types, tissues, other resources, and climatic factors revealed in this study can help to explain changes in species composition, diversity, community structure and ecosystem functioning under global N enrichment. These findings are critical in improving model simulation and projection of terrestrial carbon sequestration and its feedbacks to global climate change, especially when progressive N limitation is taken into consideration. PMID:19086179

  9. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... below 470 MHz, including those licensed pursuant to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band... Spectrum Leasing Scope and Authority § 1.9005 Included services. Link to an amendment published at 79 FR 48533, August 15, 2014. The spectrum leasing policies and rules of this subpart apply to the...

  10. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  11. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  12. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  13. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  14. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history records maintained in state criminal history record repositories, including those states participating in the NFF....

  15. Go! Including Movement during Routines and Transitions

    ERIC Educational Resources Information Center

    Orlowski, Marietta A.; Hart, Aaron

    2010-01-01

    Good schools for children ages 5 to 8 provide multiple opportunities for physical activity throughout the school day. Ideally, physical education, recess, extracurricular activities, and classroom activities together help ensure that children meet the recommended 60 minutes a day of structured activity and 60 of unstructured. Additionally, brief…

  16. New technology recipes include horseradish, vinegar, mushrooms

    SciTech Connect

    Bishop, J.

    1995-08-01

    Technology development for more effective environmental management continues to abound. This article contains some recent innovations in the following areas: wastewater treatment; site remediation; and air pollution control. In addition several emerging technologies address solid and hazardous waste management with techniques designed to reduce waste volume, recycle valuable materials and create new energy sources.

  17. Does finger sense predict addition performance?

    PubMed

    Newman, Sharlene D

    2016-05-01

    The impact of fingers on numerical and mathematical cognition has received a great deal of attention recently. However, the precise role that fingers play in numerical cognition is unknown. The current study explores the relationship between finger sense, arithmetic and general cognitive ability. Seventy-six children between the ages of 5 and 12 participated in the study. The results of stepwise multiple regression analyses demonstrated that while general cognitive ability including language processing was a predictor of addition performance, finger sense was not. The impact of age on the relationship between finger sense, and addition was further examined. The participants were separated into two groups based on age. The results showed that finger gnosia score impacted addition performance in the older group but not the younger group. These results appear to support the hypothesis that fingers provide a scaffold for calculation and that if that scaffold is not properly built, it has continued differential consequences to mathematical cognition. PMID:26993292

  18. Leukocytoclastic vasculitis caused by drug additives.

    PubMed

    Lowry, M D; Hudson, C F; Callen, J P

    1994-05-01

    Chronic cutaneous small vessel (leukocytoclastic) vasculitis (LCV) is a process believed to be related to the presence of circulating immune complexes. The most frequent causes and associated disorders are medications, infections, collagen vascular disorders, paraproteinemias, and, rarely, neoplasia. Reports of food or food additives as a causative factor for LCV have appeared but are rare. We report a patient with chronic cutaneous LCV in whom the presumed cause was an excipient (a dye) used in the capsule form of lithium carbonate. Furthermore, ingestion of foods containing dyes results in a disease flare in our patient.

  19. BE PROACTIVE: "Including Students With Challenging Behavior in Your Classroom"

    ERIC Educational Resources Information Center

    Mitchem, Katherine J.

    2005-01-01

    Many teachers feel unprepared to deal with disruptive behavior and believe this substantially interferes with their teaching and their ability to successfully include children with disabilities (Schumm & Vaughn, 1995). In addition to the stress of dealing with never-ending piles of paperwork, working with challenging students may be one of the…

  20. The Director's Toolbox for Including Children with Special Needs

    ERIC Educational Resources Information Center

    Barker, Linda; Goldberg, Roberta

    2012-01-01

    Directors of early childhood programs are the "frontline" for parents seeking admission for their children with identified special needs. In addition, developmental and behavioral issues that emerge after a child is enrolled in a program quickly come to the director's attention. Determining who can be included at a site, how to prepare the…

  1. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  2. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  3. Additional Drive Circuitry for Piezoelectric Screw Motors

    NASA Technical Reports Server (NTRS)

    Smythe, Robert; Palmer, Dean; Gursel, Yekta; Reder, Leonard; Savedra, Raymond

    2004-01-01

    Modules of additional drive circuitry have been developed to enhance the functionality of a family of commercially available positioning motors (Picomotor . or equivalent) that provide linear motion controllable, in principle, to within increments .30 nm. A motor of this type includes a piezoelectric actuator that turns a screw. Unlike traditional piezoelectrically actuated mechanisms, a motor of this type does not rely on the piezoelectric transducer to hold position: the screw does not turn except when the drive signal is applied to the actuator.

  4. Additive-free digital microfluidics.

    PubMed

    Freire, Sergio L S; Tanner, Brendan

    2013-07-16

    Digital microfluidics, a technique for manipulation of droplets, is becoming increasingly important for the development of miniaturized platforms for laboratory processes. Despite the enthusiasm, droplet motion is frequently hindered by the desorption of proteins or other analytes to surfaces. Current approaches to minimize this unwanted surface fouling involve the addition of extra species to the droplet or its surroundings, which might be problematic depending on the droplet content. Here, a new strategy is introduced to move droplets containing cells and other analytes on solid substrates, without extra moieties; in particular, droplets with bovine serum albumin could be moved at a concentration 2000 times higher than previously reported (without additives). This capability is achieved by using a soot-based superamphiphobic surface combined with a new device geometry, which favors droplet rolling. Contrasting with electrowetting, wetting forces are not required for droplet motion.

  5. Additive concentrates for distillate fuels

    SciTech Connect

    Rossi, A.; Lewtas, K.

    1985-08-27

    An additive concentrate for incorporation into wax containing petroleum fuel oil compositions to improve low temperature flow properties comprising an oil solution containing: 3% to 90 wt. % of a C30-C300 oil-soluble nitrogen compound wax crystal growth inhibitor having at least one straight C8-C40 alkyl chain and partial esters, and at least one mole per mole of an organic acid capable of hydrogen bonding to improve the solubility in the oil.

  6. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  7. Include Passive Solar in Your Renovations.

    ERIC Educational Resources Information Center

    Bender, Gerald F.; Probasco, Jack F.

    1981-01-01

    A checklist covers potential energy saving modifications in a building scheduled for renovation, and includes suggestions for room utilization, landscaping, and building envelope, solar control, and active system modifications. (Author)

  8. Haemophilus influenzae Disease (Including Hib) Symptoms

    MedlinePlus

    ... is considered invasive. Symptoms of pneumonia usually include: Fever and chills Cough Shortness of breath or difficulty breathing Sweating ... the blood. It can cause symptoms such as: Fever and chills Excessive tiredness Pain in the belly Nausea with ...

  9. Lung Disease Including Asthma and Adult Vaccination

    MedlinePlus

    ... Healthcare Professionals Lung Disease including Asthma and Adult Vaccination Language: English Español (Spanish) Recommend on Facebook Tweet ... more about health insurance options. Learn about adult vaccination and other health conditions Asplenia Diabetes Heart Disease, ...

  10. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  11. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  12. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  13. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  14. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  15. Communications circuit including a linear quadratic estimator

    DOEpatents

    Ferguson, Dennis D.

    2015-07-07

    A circuit includes a linear quadratic estimator (LQE) configured to receive a plurality of measurements a signal. The LQE is configured to weight the measurements based on their respective uncertainties to produce weighted averages. The circuit further includes a controller coupled to the LQE and configured to selectively adjust at least one data link parameter associated with a communication channel in response to receiving the weighted averages.

  16. Drag reduction by polymer additives from turbulent spectra.

    PubMed

    Calzetta, Esteban

    2010-12-01

    We extend the analysis of the friction factor for turbulent pipe flow reported by G. Gioia and P. Chakraborty [Phys. Rev. Lett. 96, 044502 (2006)] to the case where drag is reduced by polymer additives.

  17. [Intolerance to food additives: an update].

    PubMed

    Cardinale, F; Mangini, F; Berardi, M; Sterpeta Loffredo, M; Chinellato, I; Dellino, A; Cristofori, F; Di Domenico, F; Mastrototaro, M F; Cappiello, A; Centoducati, T; Carella, F; Armenio, L

    2008-12-01

    Contrary to common believing, the prevalence of the intolerance to food additives in the general population is rather low. Nowadays many doubts persist with regard both to the pathogenetic mechanisms and to the clinical and diagnostic aspects in this field. Symptoms due to, or exacerbated from, food additives usually involve non-IgE-mediate mechanisms (pseudo-allergic reactions, PAR) and are usually less severe of those induced by food allergy. The most frequent clinical feature of the intolerance to food additives still remains the urticaria-angioedema syndrome, although these substances are really involved only in a minority of patients. Other possible clinical features include anaphylaxis, atopic eczema, behaviour disturbances, asthma and non-allergic rhinitis. The diagnostic approach consists in diary cards, reporting symptoms and food habits, elimination diet and double blinded placebo-controlled oral challenge with suspected additives. However, such procedure still remains poorly standardized and numerous uncertainties persist with regard to optimal conditions for performing and interpret the challenge results. The therapeutic approach consists in the exclusion of foods and products containing the additive involved, and, in patients not compliant to the diet, in treatment with symptomatic drugs.

  18. Chemical Mixture Risk Assessment Additivity-Based Approaches

    EPA Science Inventory

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  19. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  20. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  1. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  2. New ESP additive controls particulates

    SciTech Connect

    Durham, M.D.; Baldrey, K.E.; Bustard, C.J.; Martin, C.E.; Dharmarajan, N.N.

    1997-06-01

    This article reports that a conditioning agent enhanced precipitator performance after plant switched to low-sulfur coal. Firing low-sulfur coal at a power plant designed for medium- or high-sulfur coal will impact the downstream particulate control device. Since the performance of an electro-static precipitator (ESP) is a strong function of the sulfur content in the coal, switching to a low-sulfur coal will severely impact collection efficiency. Particle resistivity is the dominant parameter affecting the performance of an ESP. When the resistivity is too high, the ESP must be increased in size by a factor of two to three, resulting in proportionally increased capital and operating costs. Fly ash from low-sulfur coal is known to have a typical resistivity one or two orders of magnitude above that for ideal collection efficiency in a well-designed ESP. Therefore, when a utility burning a medium- or high-sulfur coal switches to a low-sulfur coal, the increase in particle resistivity resulting from the reduced SO{sub 3} concentration will lead to severe problems in the ESP. There have been many instances where utilities have switched from a high- to a low-sulfur coal, and the problems caused by the increased resistivity have had such a devastating effect on the performance of the ESP that emissions have increased by a factor of 10.

  3. Weather information network including graphical display

    NASA Technical Reports Server (NTRS)

    Leger, Daniel R. (Inventor); Burdon, David (Inventor); Son, Robert S. (Inventor); Martin, Kevin D. (Inventor); Harrison, John (Inventor); Hughes, Keith R. (Inventor)

    2006-01-01

    An apparatus for providing weather information onboard an aircraft includes a processor unit and a graphical user interface. The processor unit processes weather information after it is received onboard the aircraft from a ground-based source, and the graphical user interface provides a graphical presentation of the weather information to a user onboard the aircraft. Preferably, the graphical user interface includes one or more user-selectable options for graphically displaying at least one of convection information, turbulence information, icing information, weather satellite information, SIGMET information, significant weather prognosis information, and winds aloft information.

  4. Transmission line including support means with barriers

    DOEpatents

    Cookson, Alan H.

    1982-01-01

    A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

  5. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  6. Formative Assessment: Simply, No Additives

    ERIC Educational Resources Information Center

    Roskos, Kathleen; Neuman, Susan B.

    2012-01-01

    Among the types of assessment the closest to daily reading instruction is formative assessment. In contrast to summative assessment, which occurs after instruction, formative assessment involves forming judgments frequently in the flow of instruction. Key features of formative assessment include identifying gaps between where students are and…

  7. Additional Resources on Asian Americans.

    ERIC Educational Resources Information Center

    Kodama, Corinne Maekawa; Lee, Sunny; Liang, Christopher T. H.; Alvarez, Alvin N.; McEwen, Marylu K.

    2002-01-01

    The authors identify Asian American associations and organizations, academic journals, periodicals, and media resources. Selected annotated resources on Asian American activism and politics, counseling and psychology, educational issues, gender and sexual orientation, history, policy reports, and racial and ethnic identity are also included.…

  8. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  9. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  10. The Effects of Autocorrelation on the Curve-of-Factors Growth Model

    ERIC Educational Resources Information Center

    Murphy, Daniel L.; Beretvas, S. Natasha; Pituch, Keenan A.

    2011-01-01

    This simulation study examined the performance of the curve-of-factors model (COFM) when autocorrelation and growth processes were present in the first-level factor structure. In addition to the standard curve-of factors growth model, 2 new models were examined: one COFM that included a first-order autoregressive autocorrelation parameter, and a…

  11. 75 FR 26904 - Mandatory Reporting of Greenhouse Gases: Notice of Data Availability; Default Emission Factors...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-13

    ... of Greenhouse Gases: Additional Sources of Fluorinated GHGs (75 FR 18652) which included proposed... factor, EPA proposed a range of values differentiated by production technology generation (i.e., wafer... factors as well as the underlying data that was used to develop the draft emission factors available...

  12. 34 CFR 300.20 - Include.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include. 300.20 Section 300.20 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH...

  13. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of... (part 27 of this chapter); (j) The Wireless Communications Service in the 698-746 MHz band (part 27...

  14. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of this subpart apply to...

  15. Nuclear Chemistry: Include It in Your Curriculum.

    ERIC Educational Resources Information Center

    Atwood, Charles H.; Sheline, R. K.

    1989-01-01

    Some of the topics that might be included in a nuclear chemistry section are explored. Offers radioactivity, closed shells in nuclei, energy of nuclear processes, nuclear reactions, and fission and fusion as topics of interest. Provided are ideas and examples for each. (MVL)

  16. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the Merchant Marine Act, 1936, as amended; (c) All vessels which have previously been constructed with... Merchant Marine Act of 1936, as amended, and later adjusted in price pursuant to section 9 of the Merchant... ADJUSTED UNDER THE MERCHANT SHIP SALES ACT 1946 § 289.2 Vessels included. Vessels subject to the...

  17. Multicultural Resources: Including Technology and the Internet

    ERIC Educational Resources Information Center

    Burton, Bryan

    2004-01-01

    In the fourteen years since the 1990 MENC pre-conference symposium on Multicultural Approaches to Music Education in Washington, D.C., music educators have come to recognize the need to include a variety of world musics in all music curricula, from elementary classrooms to advanced performing ensembles. Accordingly, a significant increase in the…

  18. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  19. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  20. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  1. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  2. Including Children Dependent on Ventilators in School.

    ERIC Educational Resources Information Center

    Levine, Jack M.

    1996-01-01

    Guidelines for including ventilator-dependent children in school are offered, based on experience with six such students at a New York State school. Guidelines stress adherence to the medical management plan, the school-family partnership, roles of the social worker and psychologist, orientation, transportation, classroom issues, and steps toward…

  3. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... body organ or external body member (including contiguous tissue) or replace all or part of the...

  4. Including Students with Visual Impairments: Softball

    ERIC Educational Resources Information Center

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  5. A comparison of human prothrombin, factor IX (Christmas factor), factor X (Stuart factor), and protein S.

    PubMed

    Di Scipio, R G; Hermodson, M A; Yates, S G; Davie, E W

    1977-02-22

    Human prothrombin, factor IX, and factor X have been idolated in high yield and characterized as the their amino-terminal sequence, molecular weight, amino acid composition, and migration in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. An additional human plasma protein, called protein S, has also been purified and its properties have been compared with those of prothrombin, factor IX, and factor X. Prothrombin (mol wt 72 000), factor IX (mol wt 57 000), and protein S (mol wt 69 000) are single-chain glycoproteins, while factor X (mol wt 59 000) is a glycoprotein composed of two polypeptide chains held together by a disulfide bond(s). The amino-terminal sequence of the light chain of human factor X is homologous with prothrombin, factor IX, and protein S. The heavy chain of human factor X is slightly larger than the heavy chain of bovine factor X and differs from bovine factor X in its amino-terminal sequence.

  6. Chemistry of Food Additives: Direct and Indirect Effects.

    ERIC Educational Resources Information Center

    Pauli, George H.

    1984-01-01

    The primary component(s), impurities, and degradation products of polysorbate 80, nitrate and nitrite salts, and diethylpyrocarbonate (DEPC) are discussed. Safety considerations related to these food additives are also noted. The chick-edema factor which results from an additive in poultry feed is also discussed. (JN)

  7. 17 CFR 240.12b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 240... Securities Exchange Act of 1934 General Requirements As to Contents § 240.12b-20 Additional information. In addition to the information expressly required to be included in a statement or report, there shall...

  8. 17 CFR 270.8b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 270.8b...) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270.8b-20 Additional information. In addition to the information expressly required to be included in a registration statement or report, there...

  9. The Application and Development of an Addition Goal Sketch

    ERIC Educational Resources Information Center

    Baroody, Arthur J.; Brach, Catherine; Tai, Yu-chi

    2006-01-01

    A schema based view of addition development is compared with Siegler's latest strategy-choice model, which includes an addition goal sketch (a basic understanding of "the goals and causal relations" of addition; Siegler & Crowley, 1994, p. 196). This metacognitive component in the latter model is presumed to develop as a child practices a basic…

  10. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  11. Bubble formation in additive manufacturing of glass

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Peters, Daniel C.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-05-01

    Bubble formation is a common problem in glass manufacturing. The spatial density of bubbles in a piece of glass is a key limiting factor to the optical quality of the glass. Bubble formation is also a common problem in additive manufacturing, leading to anisotropic material properties. In glass Additive Manufacturing (AM) two separate types of bubbles have been observed: a foam layer caused by the reboil of the glass melt and a periodic pattern of bubbles which appears to be unique to glass additive manufacturing. This paper presents a series of studies to relate the periodicity of bubble formation to part scan speed, laser power, and filament feed rate. These experiments suggest that bubbles are formed by the reboil phenomena why periodic bubbles result from air being trapped between the glass filament and the substrate. Reboil can be detected using spectroscopy and avoided by minimizing the laser power while periodic bubbles can be avoided by a two-step laser melting process to first establish good contact between the filament and substrate before reflowing the track with higher laser power.

  12. Mars-GRAM 2010: Additions and Resulting Improvements

    NASA Technical Reports Server (NTRS)

    Justh, Hilary L.; Burns, K. Lee

    2013-01-01

    The Mars Global Reference Atmospheric Model (Mars-GRAM) is an engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM has been utilized during previous aerobraking operations in the atmosphere of Mars. Mars-GRAM has also been used in the prediction and validation of Mars Pathfinder hypersonic aerodynamics, the aerothermodynamic and entry dynamics studies for Mars Polar Lander, the landing site selection process for the Mars Science Laboratory (MSL), the Mars Aerocapture System Study (MASS) as well as the Aerocapture Technology Assessment Group (TAG). Most recently, Mars-GRAM 2010 was used to develop the onboard atmospheric density estimator that is part of the Autonomous Aerobraking Development Plan. The most recent release of Mars-GRAM 2010 contains several changes including an update to Fortran 90/95 and the addition of adjustment factors. Following the completion of a comparison analysis between Mars-GRAM, Thermal Emission Spectrometer (TES), as well as Mars Global Surveyor (MGS), Mars Odyssey (ODY), and Mars Reconnaissance Orbiter (MRO) aerobraking density data, adjustment factors were added to Mars-GRAM 2010 that alter the input data from National Aeronautics and Space Administration (NASA) Ames Mars General Circulation Model (MGCM) and the University of Michigan Mars Thermospheric General Circulation Model (MTGCM) for the mapping year 0 user-controlled dust case. The addition of adjustment factors resolved the issue of previous versions of Mars-GRAM being less than realistic when used for sensitivity studies for mapping year 0 and large optical depth values, such as tau equal to 3. Mars-GRAM was evaluated at locations and times of TES limb observations and adjustment factors were determined. For altitudes above 80 km and below 135 km, Mars-GRAM (MTGCM) densities were compared to aerobraking densities measured by Mars Global Surveyor (MGS), Mars Odyssey (ODY), and Mars Reconnaissance Orbiter (MRO) to determine the adjustment

  13. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  14. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  15. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  16. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  17. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  18. Factor analysis of modifiable cardiovascular risk factors and prevalence of metabolic syndrome in adult Taiwanese.

    PubMed

    Tsai, Chung-Huang; Li, Tsai-Chung; Lin, Cheng-Chieh; Tsay, Hsin-Sheng

    2011-10-01

    To assess the clustering of modifiable cardiovascular risk factors among Taiwanese adults, we evaluated 579 healthy participants who underwent health examinations between May and December 2007. Exploratory factor analysis was used to examine risk factor clustering. Smoking, alcohol intake, exercise habits, body mass index, waist circumference, total cholesterol, triglycerides, high- and low-density lipoprotein cholesterol, fasting glucose, uric acid, serum hepatic enzymes, and mean arterial pressure were assessed. Separate factor analyses assessed total and low-density lipoprotein cholesterol. Principal components analysis identified five factors for a model without low-density lipoprotein cholesterol and four factors for a model without total cholesterol. Four common factors in both models explained between 51.1 and 51.8% of variance in the original 14 factors. Metabolic factors, hematological factors (white blood cells and platelets), lifestyle factors (smoking and alcohol consumption), and exercise habits and fasting blood glucose explained about 20, 11, 10, 10% of total variance, respectively. In the model without low-density lipoprotein cholesterol, total cholesterol factor explained 8.83% of variance. This study confirmed clustering of established metabolic syndrome components and revealed additional associated cardiovascular disease risk factors, including lifestyle factors, exercise and total cholesterol, which should be targeted in prevention efforts.

  19. [Biophysical Characterization of Biopharmaceuticals, Including Antibody Drugs].

    PubMed

    Uchiyama, Susumu

    2016-01-01

    Biopharmaceuticals, including antibody drugs, are now popular because of their high specificity with low adverse effects, especially in the treatment of cancer and autoimmune diseases. However, because the active pharmaceutical ingredients of biopharmaceuticals are proteins, biophysical characterization of these therapeutic proteins should be required. In this manuscript, methods of chemical and physical characterization of therapeutic proteins are described. In terms of chemical characterization, analysis of chemical modifications of the constituent amino acids is explained. Physical characterization includes higher order structural analysis and assessment of protein aggregates. Quantification methods of aggregates with different sizes, recently encouraged by the U.S. Food and Drug Administration (FDA), are introduced. As for the stability of therapeutic proteins, the importance of chemical and physical stability is explained. Finally, the contribution of colloidal and structural stability to the production of an antibody drug less prone to aggregation is introduced.

  20. Subterranean barriers including at least one weld

    DOEpatents

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  1. Modification of chemical additives to elastomeric compositions

    NASA Astrophysics Data System (ADS)

    Mukhutdinov, A. A.; Grishin, B. S.

    1994-08-01

    The physicochemical principles of the modification of crystalline chemical additives to elastomeric compositions are examined. A classification of various types of modifications based on scientific principles is given. The modifications are subdivided into physical and physicochemical depending on the configuration of the molecules in the crystals, the defectiveness and dispersity of the crystalline particles, the melting points of the crystals, and the presence of necleophilic and electrophylic centres in the molecules of the components of binary and complex eutectic mixtures. The effectiveness of the modification of the chemical additives is determined by the manifestation in binary systems of these components in elastomeric compositions of physical and chemical synergism due to the occurrence of the relevant processes in such systems. A relation has been discovered between the physical and chemical phenomena accompanying the modification of the chemical additives in binary and complex eutectic mixtures, their influence on the properties of the elastomeric composition is examined, the ecological problems associated with the processing of such materials are discussed, and the relation between the structure and properties of the molecules of the additives is analysed using quantum-chemical calculations. The bibliography includes 92 references.

  2. Power generation method including membrane separation

    DOEpatents

    Lokhandwala, Kaaeid A.

    2000-01-01

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  3. New STD recommendations include HIV management.

    PubMed

    1998-03-01

    The Centers for Disease Control and Prevention (CDC) has updated its 1993 guidelines for STDs, adding new recommendations for treating primary and recurrent genital warts and for managing patients with asymptomatic HIV infection. The guidelines grew out of research into microbiologic cures, alleviating signs and symptoms, preventing sequelae, and preventing transmission. The guidelines recommend that people seeking treatment for STDs should be offered HIV testing and counseling. Results of a recent Alan Guttmacher Institute study of STD public health programs are included.

  4. Temporary agency contracts: what should they include?

    PubMed

    Sferrella, Sheila M

    2002-01-01

    The AHRA Board committed to provide some tools to help our members with agency contracts. This article provides the sections for a contract and what they should include. Of course, the language will have to comply with your organization's requirements. To comply with HIPAA regulations for contracts, I've also included language for business associates. JCAHO requires that the following documentation be on file for all contracted personnel: 1. Hospital job description or formal contract outlining the job responsibilities. 2. All licenses, certifications and registrations are reviewed and a process is developed to ensure that they remain current. 3. Competency is evaluated and maintained. 4. Evidence that personnel received a general orientation. 5. Evidence that personnel received a departmental orientation. 6. Safety and infection control standards must be met. In order to aid with compliance when utilizing contracted personnel, my organization developed a Contractor Personnel Administrative Compliance Checklist, which identifies requirements for compliance, a reference for assistance, and places to record that the requirement has been met for each of the areas listed in the previous item. Our standard contract includes sections on general definition of engagement, credentials and work experience; health, including immunization and drug testing; corporation; JCAHO; terms of the contract; and, non-disclosure of information. A business associate agreement may be necessary to comply with HIPAA regulations. Using the template has made my job much easier than trying to read each contract that crosses my desk. If an agency refuses to sign our contract, then we do not conduct business with that company. If an agency requests changes to the contract, depending on the language, we may or may not agree to it. This information is not intended to be legal advice, but rather an educational overview. As with any contract, the reader should consult with legal counsel at his or her

  5. Electric power monthly, September 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  6. Temporary agency contracts: what should they include?

    PubMed

    Sferrella, Sheila M

    2002-01-01

    The AHRA Board committed to provide some tools to help our members with agency contracts. This article provides the sections for a contract and what they should include. Of course, the language will have to comply with your organization's requirements. To comply with HIPAA regulations for contracts, I've also included language for business associates. JCAHO requires that the following documentation be on file for all contracted personnel: 1. Hospital job description or formal contract outlining the job responsibilities. 2. All licenses, certifications and registrations are reviewed and a process is developed to ensure that they remain current. 3. Competency is evaluated and maintained. 4. Evidence that personnel received a general orientation. 5. Evidence that personnel received a departmental orientation. 6. Safety and infection control standards must be met. In order to aid with compliance when utilizing contracted personnel, my organization developed a Contractor Personnel Administrative Compliance Checklist, which identifies requirements for compliance, a reference for assistance, and places to record that the requirement has been met for each of the areas listed in the previous item. Our standard contract includes sections on general definition of engagement, credentials and work experience; health, including immunization and drug testing; corporation; JCAHO; terms of the contract; and, non-disclosure of information. A business associate agreement may be necessary to comply with HIPAA regulations. Using the template has made my job much easier than trying to read each contract that crosses my desk. If an agency refuses to sign our contract, then we do not conduct business with that company. If an agency requests changes to the contract, depending on the language, we may or may not agree to it. This information is not intended to be legal advice, but rather an educational overview. As with any contract, the reader should consult with legal counsel at his or her

  7. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  8. Rotor assembly including superconducting magnetic coil

    DOEpatents

    Snitchler, Gregory L.; Gamble, Bruce B.; Voccio, John P.

    2003-01-01

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  9. Factor VII deficiency

    MedlinePlus

    ... may be done include: Partial thromboplastin time ( PTT ) Plasma factor VII activity Prothrombin time ( PT ) Mixing study ... controlled by getting intravenous (IV) infusions of normal plasma, concentrates of factor VII, or genetically produced (recombinant) ...

  10. GATA factors in endocrine neoplasia.

    PubMed

    Pihlajoki, Marjut; Färkkilä, Anniina; Soini, Tea; Heikinheimo, Markku; Wilson, David B

    2016-02-01

    GATA transcription factors are structurally-related zinc finger proteins that recognize the consensus DNA sequence WGATAA (the GATA motif), an essential cis-acting element in the promoters and enhancers of many genes. These transcription factors regulate cell fate specification and differentiation in a wide array of tissues. As demonstrated by genetic analyses of mice and humans, GATA factors play pivotal roles in the development, homeostasis, and function of several endocrine organs including the adrenal cortex, ovary, pancreas, parathyroid, pituitary, and testis. Additionally, GATA factors have been shown to be mutated, overexpressed, or underexpressed in a variety of endocrine tumors (e.g., adrenocortical neoplasms, parathyroid tumors, pituitary adenomas, and sex cord stromal tumors). Emerging evidence suggests that GATA factors play a direct role in the initiation, proliferation, or propagation of certain endocrine tumors via modulation of key developmental signaling pathways implicated in oncogenesis, such as the WNT/β-catenin and TGFβ pathways. Altered expression or function of GATA factors can also affect the metabolism, ploidy, and invasiveness of tumor cells. This article provides an overview of the role of GATA factors in endocrine neoplasms. Relevant animal models are highlighted.

  11. Factor Analysis and Counseling Research

    ERIC Educational Resources Information Center

    Weiss, David J.

    1970-01-01

    Topics discussed include factor analysis versus cluster analysis, analysis of Q correlation matrices, ipsativity and factor analysis, and tests for the significance of a correlation matrix prior to application of factor analytic techniques. Techniques for factor extraction discussed include principal components, canonical factor analysis, alpha…

  12. Femtosecond fiber laser additive manufacturing of tungsten

    NASA Astrophysics Data System (ADS)

    Bai, Shuang; Liu, Jian; Yang, Pei; Zhai, Meiyu; Huang, Huan; Yang, Lih-Mei

    2016-04-01

    Additive manufacturing (AM) is promising to produce complex shaped components, including metals and alloys, to meet requirements from different industries such as aerospace, defense and biomedicines. Current laser AM uses CW lasers and very few publications have been reported for using pulsed lasers (esp. ultrafast lasers). In this paper, additive manufacturing of Tungsten materials is investigated by using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. Fully dense Tungsten part with refined grain and increased hardness was obtained and compared with parts made with different pulse widths and CW laser. The results are evidenced that the fs laser based AM provides more dimensions to modify mechanical properties with controlled heating, rapid melting and cooling rates compared with a CW or long pulsed laser. This can greatly benefit to the make of complicated structures and materials that could not be achieved before.

  13. The teratology testing of food additives.

    PubMed

    Barrow, Paul C; Spézia, François

    2013-01-01

    The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals.

  14. Reduced Toxicity Fuel Satellite Propulsion System Including Plasmatron

    NASA Technical Reports Server (NTRS)

    Schneider, Steven J. (Inventor)

    2003-01-01

    A reduced toxicity fuel satellite propulsion system including a reduced toxicity propellant supply for consumption in an axial class thruster and an ACS class thruster. The system includes suitable valves and conduits for supplying the reduced toxicity propellant to the ACS decomposing element of an ACS thruster. The ACS decomposing element is operative to decompose the reduced toxicity propellant into hot propulsive gases. In addition the system includes suitable valves and conduits for supplying the reduced toxicity propellant to an axial decomposing element of the axial thruster. The axial decomposing element is operative to decompose the reduced toxicity propellant into hot gases. The system further includes suitable valves and conduits for supplying a second propellant to a combustion chamber of the axial thruster. whereby the hot gases and the second propellant auto-ignite and begin the combustion process for producing thrust.

  15. Additional calculations of triton moments

    NASA Astrophysics Data System (ADS)

    Lally, D. F.; Levinger, J. S.

    1982-02-01

    The formalism of hyperspherical harmonics is used to calculate several moments of the triton photoeffect for a Volkov potential with Serber exchange. The accuracy of Clare's calculations of moments σ0 and σ1 is improved by including more terms in the hyperspherical harmonic expansion of the potential and of the ground state wave function. The moment σ2=8.9×104 MeV3 mb is calculated using one term in the hyperspherical harmonic expansions of the potential and wave function. We invert four moments and find reasonable agreement with Gorbunov's measurements of the 3He photoeffect. NUCLEAR REACTIONS Triton photoeffect, hyperspherical harmonics, moments of photoeffect, inversion of moments.

  16. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  17. Supplier Selection Using Weighted Utility Additive Method

    NASA Astrophysics Data System (ADS)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  18. Impact of Including Higher Actinides in Fast Reactor Transmutation Analyses

    SciTech Connect

    B. Forget; M. Asgari; R. Ferrer; S. Bays

    2007-09-01

    Previous fast reactor transmutation studies generally disregarded higher mass minor actinides beyond Cm-246 due to various considerations including deficiencies in nuclear cross-section data. Although omission of these higher mass actinides does not significantly impact the neutronic calculations and fuel cycle performance parameters follow-on neutron dose calculations related to fuel recycling, transportation and handling are significantly impacted. This report shows that including the minor actinides in the equilibrium fast reactor calculations will increase the predicted neutron emission by about 30%. In addition a sensitivity study was initiated by comparing the impact of different cross-section evaluation file for representing these minor actinides.

  19. Rare thoracic cancers, including peritoneum mesothelioma.

    PubMed

    Siesling, Sabine; van der Zwan, Jan Maarten; Izarzugaza, Isabel; Jaal, Jana; Treasure, Tom; Foschi, Roberto; Ricardi, Umberto; Groen, Harry; Tavilla, Andrea; Ardanaz, Eva

    2012-05-01

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002, registered in 89 population-based cancer registries (CRs) and followed-up to 31st December 2003. Over 17,688 cases of rare thoracic cancers were selected based on the list of the RACECARE project. Mesothelioma was the most common tumour (19 per million per year) followed by epithelial tumours of the trachea and thymus (1.3 and 1.7, respectively). The age standardised incidence rates of epithelial tumours of the trachea was double in Eastern and Southern Europe versus the other European regions: 2 per million per year. Epithelial tumours of the thymus had the lowest incidence in Northern and Eastern Europe and UK and Ireland(1) and somewhat higher incidence in Central and Southern Europe.(2) Highest incidence in mesothelioma was seen in UK and Ireland(23) and lowest in Eastern Europe.(4) Patients with tumours of the thymus had the best prognosis (1-year survival 85%, 66% at 5 years). Five year survival was lowest for the mesothelioma 5% compared to 14% of patients with tumours of the trachea. Mesothelioma was the most prevalent rare cancer (12,000 cases), followed by thymus (7000) and trachea (1400). Cancer Registry (CR) data play an important role in revealing the burden of rare thoracic cancers and monitoring the effect of regulations on asbestos use and smoking related policies.

  20. [Two cases of anaerobic empyema including Actinomyces].

    PubMed

    Matsuura, Yukiko; Ishikawa, Satoru; Takiguchi, Yasuo

    2009-03-01

    We report 2 cases of empyema including Actinomyces spp. Case 1 was a 66-year-old man with fever and left pleural effusion, Actinomyces israelii and 2 other microbes were isolated. Case 2 was a 52-year-old male inpatient who developed empyema during treatment of upper gastrointestinal bleeding. Actinomyces odontolyticus and 3 other microbes were cultured in pleural effusion. Empyema caused by Actinomyces spp. is rare, in particular Actinomyces odontolyticus is rarely isolated and only 4 cases have been reported in Japan.

  1. Inverse transonic airfoil design including viscous interaction

    NASA Technical Reports Server (NTRS)

    Carlson, L. A.

    1976-01-01

    A numerical technique was developed for the analysis of specified transonic airfoils or for the design of airfoils having a prescribed pressure distribution, including the effect of weak viscous interaction. The method uses the full potential equation, a stretched Cartesian coordinate system, and the Nash-MacDonald turbulent boundary layer method. Comparisons with experimental data for typical transonic airfoils show excellent agreement. An example shows the application of the method to design a thick aft-cambered airfoil, and the effects of viscous interaction on its performance are discussed.

  2. View of northeastern Italy including Venice

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A near vertical view of northeastern Italy including the Venice (Venezia) area is seen in this Skylab 3 Earth Resources Experiments Package S190-B (five-inch earth terrain camera) infrared photograph taken from the Skylab space station in Earth orbit. The mountainous area is the Dolomite Alps. The most conspicuous stream northeast of Venice is the Piave River. The city near the center of the picture on the Brenta River is Bassano del Grappa. The large city of Padua (Padova) is on the western bank of the Grenta near the clock.

  3. Multiverse rate equation including bubble collisions

    NASA Astrophysics Data System (ADS)

    Salem, Michael P.

    2013-03-01

    The volume fractions of vacua in an eternally inflating multiverse are described by a coarse-grain rate equation, which accounts for volume expansion and vacuum transitions via bubble formation. We generalize the rate equation to account for bubble collisions, including the possibility of classical transitions. Classical transitions can modify the details of the hierarchical structure among the volume fractions, with potential implications for the staggering and Boltzmann-brain issues. Whether or not our vacuum is likely to have been established by a classical transition depends on the detailed relationships among transition rates in the landscape.

  4. Ocean management plan includes array of recommendations

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    When U.S. President Bill Clinton and Vice President Al Gore appeared in Monterey, California in June 1998 for a National Oceans Conference, some of the salt water spray from the Pacific Ocean must have clung to them.As a follow-up to the conference, the Clinton Administration on September 2 issued an interagency report to help guide federal efforts in establishing a comprehensive ocean policy.The report, which touches upon a number of global issues including the United Nations Convention on the Law of the Sea, contains nearly 150 recommendations.

  5. Fuel delivery system including heat exchanger means

    NASA Technical Reports Server (NTRS)

    Coffinberry, G. A. (Inventor)

    1978-01-01

    A fuel delivery system is presented wherein first and second heat exchanger means are each adapted to provide the transfer of heat between the fuel and a second fluid such as lubricating oil associated with the gas turbine engine. Valve means are included which are operative in a first mode to provide for flow of the second fluid through both first and second heat exchange means and further operative in a second mode for bypassing the second fluid around the second heat exchanger means.

  6. Additive attacks on speaker recognition

    NASA Astrophysics Data System (ADS)

    Farrokh Baroughi, Alireza; Craver, Scott

    2014-02-01

    Speaker recognition is used to identify a speaker's voice from among a group of known speakers. A common method of speaker recognition is a classification based on cepstral coefficients of the speaker's voice, using a Gaussian mixture model (GMM) to model each speaker. In this paper we try to fool a speaker recognition system using additive noise such that an intruder is recognized as a target user. Our attack uses a mixture selected from a target user's GMM model, inverting the cepstral transformation to produce noise samples. In our 5 speaker data base, we achieve an attack success rate of 50% with a noise signal at 10dB SNR, and 95% by increasing noise power to 0dB SNR. The importance of this attack is its simplicity and flexibility: it can be employed in real time with no processing of an attacker's voice, and little computation is needed at the moment of detection, allowing the attack to be performed by a small portable device. For any target user, knowing that user's model or voice sample is sufficient to compute the attack signal, and it is enough that the intruder plays it while he/she is uttering to be classiffed as the victim.

  7. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  8. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  9. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting. PMID:25500631

  10. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  11. Inlet Guide Vane Wakes Including Rotor Effects

    NASA Astrophysics Data System (ADS)

    Johnston, R. T.; Fleeter, S.

    2001-02-01

    Fundamental experiments are described directed at the investigation of forcing functions generated by an inlet guide vane (IGV) row, including interactions with the downstream rotor, for application to turbomachine forced response design systems. The experiments are performed in a high-speed research fan facility comprised of an IGV row upstream of a rotor. IGV-rotor axial spacing is variable, with the IGV row able to be indexed circumferentially, thereby allowing measurements to be made across several IGV wakes. With an IGV relative Mach number of 0.29, measurements include the IGV wake pressure and velocity fields for three IGV-rotor axial spacings. The decay characteristics of the IGV wakes are compared to the Majjigi and Gliebe empirical correlations. After Fourier decomposition, a vortical-potential gust splitting analysis is implemented to determine the vortical and potential harmonic wake gust forcing functions both upstream and downstream of the rotor. Higher harmonics of the vortical gust component of the IGV wakes are found to decay at a uniform rate due to viscous diffusion.

  12. Evaluating Additive Interaction Using Survival Percentiles.

    PubMed

    Bellavia, Andrea; Bottai, Matteo; Orsini, Nicola

    2016-05-01

    Evaluation of statistical interaction in time-to-event analysis is usually limited to the study of multiplicative interaction, via inclusion of a product term in a Cox proportional-hazard model. Measures of additive interaction are available but seldom used. All measures of interaction in survival analysis, whether additive or multiplicative, are in the metric of hazard, usually assuming that the interaction between two predictors of interest is constant during the follow-up period. We introduce a measure to evaluate additive interaction in survival analysis in the metric of time. This measure can be calculated by evaluating survival percentiles, defined as the time points by which different subpopulations reach the same incidence proportion. Using this approach, the probability of the outcome is fixed and the time variable is estimated. We also show that by using a regression model for the evaluation of conditional survival percentiles, including a product term between the two exposures in the model, interaction is evaluated as a deviation from additivity of the effects. In the simple case of two binary exposures, the product term is interpreted as excess/decrease in survival time (i.e., years, months, days) due to the presence of both exposures. This measure of interaction is dependent on the fraction of events being considered, thus allowing evaluation of how interaction changes during the observed follow-up. Evaluation of interaction in the context of survival percentiles allows deriving a measure of additive interaction without assuming a constant effect over time, overcoming two main limitations of commonly used approaches.

  13. The lever of riches. [Includes innovation

    SciTech Connect

    Mokyr, J.

    1990-01-01

    The main reason I have dwelled so long on the distinction between micro- and macroinventions is that both were very much part of the story. Here, then, is the most fundamental complementarity of the economic history of technological change. Without new big ideas, the drift of cumulative small inventions will start to run into diminishing returns. When exactly this will occur depends on the technique in question, but it seems clear that additional improvements in the sailing ship were becoming more difficult by the 1870s, that best-practice grain yields were approximating some kind of ceiling by the mid-nineteenth century, and that crucible steel had been taken a long way by 1856. Macroinventions such as the screw propeller, chemical fertilizers, and the Bessemer process revitalized a movement that was approaching something close to a technological ceiling. It is not necessary for the ideas to emerge in the receptive economy itself; some of the inventions Britian exploited during the Industrial Revolution came from France. After 1860 the inventions it generated were increasingly adopted in other countries more quickly than in Britian itself. Regardless of where they came from, genuinely important new ideas were neither cheap nor elastically supplied. Technology was, as I have argued repeatedly, constrained by supply. What made societies poor was not that they had too few resources, but that they did not know how to produce more wealth with the resources they had. Ideas alone may not have been enough either; all the same, they were indispensable.

  14. Rust inhibiting additive compositions for oils

    SciTech Connect

    Haugen, H.

    1980-09-23

    Compositions which include mixtures of a calcium hydroxide overbased oil-soluble calcium sulfonate, hexylene glycol and a surfactant consisting of an ethoxylated aliphatic amine, particularly, diethoxylated cocoamine or diethoxylated soyamine, are useful as rust inhibiting additives for oils and the like. By incorporating these compositions in petroleum based oils such as petroleum based oils of lubricating oil quality which come into contact with metal surfaces under conditions such that the metal surfaces tend to rust or otherwise be subject to deterioration it is possible to inhibit rust formation on such metal surfaces.

  15. Electrolyte additive for improved battery performance

    DOEpatents

    Bellows, Richard J.; Kantner, Edward

    1989-04-04

    In one embodiment of the present invention, there is provided an electrochemical cell having a metal bromine couple. The cell includes an electrode structure on which to deposit the metal of the couple and a counterelectrode at which to generate bromine. A microporous membrane separates the electrode and counterelectrode. Importantly, the aqueous electrolyte comprises an aqueous metal bromide solution containing a water soluble bromine complexing agent capable of forming a water immiscible complex with bromine and an additive capable of decreasing the wettability of the microporous separators employed in such cells by such water immiscible bromine complexes.

  16. Non-additive and Additive Genetic Effects on Extraversion in 3314 Dutch Adolescent Twins and Their Parents

    PubMed Central

    Rebollo-Mesa, Irene; Hudziak, James J.; Willemsen, Gonneke; Boomsma, Dorret I.

    2012-01-01

    The influence of non-additive genetic influences on personality traits has been increasingly reported in adult populations. Less is known, however, with respect to younger samples. In this study, we examine additive and non-additive genetic contributions to the personality trait of extraversion in 1,689 Dutch twin pairs, 1,505 mothers and 1,637 fathers of the twins. The twins were on average 15.5 years (range 12–18 years). To increase statistical power to detect non-additive genetic influences, data on extraversion were also collected in parents and simultaneously analyzed. Genetic modeling procedures incorporating age as a potential modifier of heritability showed significant influences of additive (20–23%) and non-additive genetic factors (31–33%) in addition to unshared environment (46–48%) for adolescents and for their parents. The additive genetic component was slightly and positively related to age. No significant sex differences were found for either extraversion means or for the magnitude of the genetic and environmental influences. There was no evidence of non-random mating for extraversion in the parental generation. Results show that in addition to additive genetic influences, extraversion in adolescents is influenced by non-additive genetic factors. PMID:18240014

  17. Optical panel system including stackable waveguides

    DOEpatents

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  18. Thermovoltaic semiconductor device including a plasma filter

    DOEpatents

    Baldasaro, Paul F.

    1999-01-01

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  19. Education Program on Fossil Resources Including Coal

    NASA Astrophysics Data System (ADS)

    Usami, Masahiro

    Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

  20. Optical panel system including stackable waveguides

    SciTech Connect

    DeSanto, Leonard; Veligdan, James T.

    2007-11-20

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.