Science.gov

Sample records for additional functional studies

  1. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  2. Immunotoxic effects of the color additive caramel color III: immune function studies in rats.

    PubMed

    Houben, G F; Penninks, A H; Seinen, W; Vos, J G; Van Loveren, H

    1993-01-01

    Administration of the color additive caramel color III (AC) may cause a reduction in total white blood cell counts in rats due to reduced lymphocyte counts. Beside lymphopenia, several other effects in rat have been described. The effects are caused by the imidazole derivative 2-acetyl-4(5)-(1,2,3,4-tetrahydroxybutyl)imidazole (THI) and occur in rats fed a diet low in vitamin B6. In the present paper, immune function studies on AC and THI with rats fed a diet low, but not deficient in vitamin B6 are presented and discussed. Rats were exposed to 0.4 or 4% AC or to 5.72 ppm THI in drinking water during and for 28 days prior to the start of immune function assays. Resistance to Trichinella spiralis was examined in an oral infection model and clearance of Listeria monocytogenes upon an intravenous infection was studied. In addition, natural cell-mediated cytotoxicity of splenic and nonadherent peritoneal cells and the antibody response to sheep red blood cells were studied. From the results it is concluded that exposure of rats to AC or THI influenced various immune function parameters. Thymus-dependent immunity was suppressed, while parameters of the nonspecific resistance were also affected, as shown by a decreased natural cell-mediated cytotoxicity in the spleen and an enhanced clearance of L. monocytogenes. PMID:8432426

  3. Addition reaction of alkyl radical to C60 fullerene: Density functional theory study

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto; Kawabata, Hiroshi

    2016-02-01

    Functionalized fullerenes are known as a high-performance molecules. In this study, the alkyl-functionalized fullerenes (denoted by R-C60) have been investigated by means of the density functional theory (DFT) method to elucidate the effects of functionalization on the electronic states of fullerene. Also, the reaction mechanism of alkyl radicals with C60 was investigated. The methyl, ethyl, propyl, and butyl radicals (denoted by n = 1-4, where n means the number of carbon atoms in the alkyl radical) were examined as alkyl radicals. The DFT calculation showed that the alkyl radical binds to the carbon atom of C60 at the on-top site, and a strong C-C single bond is formed. The binding energies of alkyl radicals to C60 were distributed in the range of 31.8-35.1 kcal mol-1 at the CAM-B3LYP/6-311G(d,p) level. It was found that the activation barrier exists before alkyl addition, the barrier heights were calculated to be 2.1-2.8 kcal mol-1. The electronic states of R-C60 complexes were discussed on the basis of the theoretical results.

  4. Density functional theory study of the effects of alloying additions on sulfur adsorption on nickel surfaces

    NASA Astrophysics Data System (ADS)

    Malyi, Oleksandr I.; Chen, Zhong; Kulish, Vadym V.; Bai, Kewu; Wu, Ping

    2013-01-01

    Reactions of hydrogen sulfide (H2S) with Nickel/Ytrria-doped zirconia (Ni/YDZ) anode materials might cause degradation of the performance of solid oxide fuel cells when S containing fuels are used. In this paper, we employ density functional theory to investigate S adsorption on metal (M)-doped and undoped Ni(0 0 1) and Ni(1 1 1) surfaces. Based on the performed calculations, we analyze the effects of 12 alloying additions (Ag, Au, Al, Bi, Cd, Co, Cu, Fe, Sn, Sb, V, and Zn) on the temperature of transition between clean (S atoms do not adsorb on the surfaces) and contaminated (S atoms can adsorb on the surfaces spontaneously) M-doped Ni surfaces for different concentrations of H2S in the fuel. Predicted results are consistent with many experimental studies relevant to S poisoning of both Ni/YDZ and M-doped Ni/YDZ anode materials. This study is important to understand S poisoning phenomena and to develop new S tolerant anode materials.

  5. Addition polyimide end cap study

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.

    1980-01-01

    The characterization of addition polyimides with various end caps for adhesive applications at 120-250 C environments is discussed. Oligometric polyimides were prepared from 3,3',4,4'-benzophenone tetracarboxylic dianhydride and 3,3'-methylenedianiline which were end-capped with functionally reactive moities which cause crosslinking when the oligomers are heated to 200-400 C. The syntheses of the oligomers are outlined. The thermolysis of the oligomers was studied by differential scanning calorimetry and the resulting polymers were characterized by differential thermal analysis and adhesive performance. The adhesive data include lap shear strengths on titanium 6-4 adherends both before and after aging for 1000 hours at 121 C and/or 232 C.

  6. Characterizing neuromorphologic alterations with additive shape functionals

    NASA Astrophysics Data System (ADS)

    Barbosa, M. S.; Costa, L. Da F.; Bernardes, E. S.; Ramakers, G.; van Pelt, J.

    2004-01-01

    The complexity of a neuronal cell shape is known to be related to its function. Specifically, among other indicators, a decreased complexity in the dendritic trees of cortical pyramidal neurons has been associated with mental retardation. In this paper we develop a procedure to address the characterization of morphological changes induced in cultured neurons by over-expressing a gene involved in mental retardation. Measures associated with the multiscale connectivity, an additive image functional, are found to give a reasonable separation criterion between two categories of cells. One category consists of a control group and two transfected groups of neurons, and the other, a class of cat ganglionary cells. The reported framework also identified a trend towards lower complexity in one of the transfected groups. Such results establish the suggested measures as an effective descriptors of cell shape.

  7. Hyperbolic tangential function-based progressive addition lens design.

    PubMed

    Qiu, Gufeng; Cui, Xudong

    2015-12-10

    The diopter distribution is key to the successful design of a progressive addition lens. A hyperbolic tangential function is then introduced to describe well the desired diopter distribution on the lens. Simulation and fabrication show that the astigmia on the whole surface is very close to the addition, exhibiting superior performance than that of currently used high-order polynomials and cosine functions. Our investigations found that once the diopter distribution design is reasonable, both the direct and indirect methods of constructing a progressive addition lens can give consistent results. With this function we are able to effectively control the design of critical areas, the position, sizes of far-view and near-view zones, as well as the channel of the lens. This study would provide an efficient way to customize different progressive lenses not only for presbyopia, but also for anti-fatigue, office progressive usages, etc. PMID:26836863

  8. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  9. Structural-functional characterization of the cathodic haemoglobin of the conger eel Conger conger: molecular modelling study of an additional phosphate-binding site.

    PubMed Central

    Pellegrini, Mariagiuseppina; Giardina, Bruno; Verde, Cinzia; Carratore, Vito; Olianas, Alessandra; Sollai, Luigi; Sanna, Maria T; Castagnola, Massimo; di Prisco, Guido

    2003-01-01

    The protein sequence data for the alpha- and beta-chains have been deposited in the SWISS-PROT and TrEMBL protein knowledgebase under the accession numbers P83479 and P83478 respectively. The Conger conger (conger eel) haemoglobin (Hb) system is made of three components, one of which, the so-called cathodic Hb, representing approx. 20% of the total pigment, has been purified and characterized from both a structural and functional point of view. Stripped Hb showed a reverse Bohr effect, high oxygen affinity and slightly low cooperativity in the absence of any effector. Addition of saturating GTP strongly influences the pH dependence of the oxygen affinity, since the reverse Bohr effect, observed under stripped conditions, is converted into a small normal Bohr effect. A further investigation of the GTP effect on oxygen affinity, carried out by fitting its titration curve, demonstrated the presence of two independent binding sites. Therefore, on the basis of the amino acid sequence of the alpha- and beta-chains, which have been determined, a computer modelling study has been performed. The data suggest that C. conger cathodic Hb may bind organic phosphates at two distinct binding sites located along the central cavity of the tetramer by hydrogen bonds and/or electrostatic interactions with amino acid residues of both chains, which have been identified. Among these residues, the two Lys-alpha(G6) (where the letter refers to the haemoglobin helix and the number to the amino acid position in the helix) appear to have a key role in the GTP movement from the external binding region to the internal central cavity of the tetrameric molecule. PMID:12646043

  10. Density functional for ternary non-additive hard sphere mixtures.

    PubMed

    Schmidt, Matthias

    2011-10-19

    Based on fundamental measure theory, a Helmholtz free energy density functional for three-component mixtures of hard spheres with general, non-additive interaction distances is constructed. The functional constitutes a generalization of the previously given theory for binary non-additive mixtures. The diagrammatic structure of the spatial integrals in both functionals is of star-like (or tree-like) topology. The ternary diagrams possess a higher degree of complexity than the binary diagrams. Results for partial pair correlation functions, obtained via the Ornstein-Zernike route from the second functional derivatives of the excess free energy functional, agree well with Monte Carlo simulation data. PMID:21946780

  11. Functional mapping of left parietal areas involved in simple addition and multiplication. A single-case study of qualitative analysis of errors.

    PubMed

    Della Puppa, Alessandro; De Pellegrin, Serena; Salillas, Elena; Grego, Alberto; Lazzarini, Anna; Vallesi, Antonino; Saladini, Marina; Semenza, Carlo

    2015-09-01

    All electrostimulation studies on arithmetic have so far solely reported general errors. Nonetheless, a classification of the errors during stimulation can inform us about underlying arithmetic processes. The present electrostimulation study was performed in a case of left parietal glioma. The patient's erroneous responses suggested that calculation was mainly applied for addition and a combination of retrieval and calculation was mainly applied for multiplication. The findings of the present single-case study encourage follow up with further data collection with the same paradigm. PMID:24646158

  12. Development of additional tasks for the executive function performance test.

    PubMed

    Hahn, Bridget; Baum, Carolyn; Moore, Jennifer; Ehrlich-Jones, Linda; Spoeri, Susan; Doherty, Meghan; Wolf, Timothy J

    2014-01-01

    OBJECTIVE. The Executive Function Performance Test (EFPT) is a reliable and valid performance-based assessment of executive function for people with stroke. The objective of this study was to enhance the clinical utility of the EFPT by developing and testing additional tasks for the EFPT in the Alternate EFPT (aEFPT). METHOD. We performed a cross-sectional study with poststroke participants (n = 25) and healthy control participants (n = 25). All participants completed a neuropsychological assessment battery and both the EFPT and the aEFPT. RESULTS. No statistically significant differences were found between the EFPT and the aEFPT when examining total scores, construct scores, and two overall task scores. Correlations between the aEFPT and the neuropsychological measures were adequate to strong (r2s = .59-.83). CONCLUSION. The aEFPT tasks are comparable to the original EFPT tasks, providing occupational therapy practitioners with additional tasks that can be used clinically to identify performance-based executive function deficits in people with stroke. PMID:25397771

  13. Nonlinear responses in salt marsh functioning to increased nitrogen addition.

    PubMed

    Vivanco, Lucía; Irvine, Irina C; Martiny, Jennifer B H

    2015-04-01

    Salt marshes provide storm protection to shorelines, sequester carbon (C), and mitigate coastal eutrophication. These valuable coastal ecosystems are confronted with increasing nitrogen (N) inputs from anthropogenic sources, such as agricultural runoff, wastewater, and atmospheric deposition. To inform predictions of salt marsh functioning and sustainability in the future, we characterized the response of a variety of plant, microbial, and sediment responses to a seven-level gradient of N addition in three Californian salt marshes after 7 and 14 months of N addition. The marshes showed variable responses to the experimental N gradient that can be grouped as neutral (root biomass, sediment respiration, potential carbon mineralization, and potential net nitrification), linear (increasing methane flux, decreasing potential net N mineralization, and increasing sediment inorganic N), and nonlinear (saturating aboveground plant biomass and leaf N content, and exponentially increasing sediment inorganic and organic N). The three salt marshes showed quantitative differences in most ecosystem properties and processes rates; however, the form of the response curves to N addition were generally consistent across the three marshes, indicating that the responses observed may be applicable to other marshes in the region. Only for sediment properties (inorganic and organic N pool) did the shape of the response differ significantly between marshes. Overall, the study suggests salt marshes are limited in their ability to sequester C and N with future increases in N, even without further losses in marsh area. PMID:26230015

  14. Some new addition formulae for Weierstrass elliptic functions

    PubMed Central

    Eilbeck, J. Chris; England, Matthew; Ônishi, Yoshihiro

    2014-01-01

    We present new addition formulae for the Weierstrass functions associated with a general elliptic curve. We prove the structure of the formulae in n-variables and give the explicit addition formulae for the 2- and 3-variable cases. These new results were inspired by new addition formulae found in the case of an equianharmonic curve, which we can now observe as a specialization of the results here. The new formulae, and the techniques used to find them, also follow the recent work for the generalization of Weierstrass functions to curves of higher genus. PMID:25383018

  15. Application of rational functions for the standard addition method.

    PubMed

    Gorazda, Katarzyna; Michałowska-Kaczmarczyk, Anna M; Asuero, Agustin G; Michałowski, Tadeusz

    2013-11-15

    Some rational functions are considered as the basis for calculation of unknown concentration (x0) of an analyte X determined according to the standard addition method (SAM). The correction for dilution of the sample tested during addition of successive increments of standard(ised) solution of X is involved in the related algorithm applied for calculation of the x0 value. The formulae derived were put in context with experimental data, obtained according to the AAS method from Cu-measurements in samples obtained by digestion of an ash obtained from incinerated sludge. It was stated that the use of rational functions for modeling purposes strengthens the robustness of the results thus obtained. PMID:24148496

  16. Tuning of the Electronic Properties of Armchair Graphene Nanoribbons through Functionalization: Theoretical Study of (1)Δg O2 Border Addition.

    PubMed

    Ghigo, Giovanni; Maranzana, Andrea; Tonachini, Glauco

    2015-10-01

    We report the results of a DFT study of the border oxidation by (1) Δg O2 of molecular models of armchair graphene nanoribbons (a-GNRs). The aim of this work is to propose a new method, as an alternative or complementary method to the tuning of the size, to modify the electronic properties of a-GNRs. Here, we investigate modification of the HOMO and LUMO energies, which are some of the most important parameters to be controlled in the design of organic electronic devices. We study the oxidation reaction mechanism of medium-size polycyclic aromatic hydrocarbons, mimicking the stiffness and reactivity of a-GNRs. Thermodynamics and kinetics indicate that the reaction should bring about a decoration of the borders with vicinal dialdehyde groups. We also study the effect of this oxidation on the HOMO and LUMO energies of two series of molecular models of a-GNRs with increasing lengths. The results suggest that the oxidized a-GNRs should present LUMO energies lowered by 0.3-0.5 eV with respect to the original material, whereas the HOMO energies are barely lowered. PMID:26401974

  17. Radical additions to chiral hydrazones: stereoselectivity and functional group compatibility.

    PubMed

    Friestad, Gregory K

    2012-01-01

    Free radical additions to imino compounds offer increased synthetic accessibility of chiral amines, but lack of general methods for stereocontrol has hindered their development. This review focuses on two asymmetric amine synthesis strategies designed to address this problem, with emphasis on addition of functionalized radicals which may facilitate applications to synthesis of complex targets. First, chiral N-acylhydrazones are acceptors for intermolecular radical additions of a wide range of primary, secondary, and tertiary alkyl halides to the C=N bond, with radicals generated under manganese-, tin-, or boron-mediated conditions. A variety of aldehydes and ketones serve as viable precursors for the chiral hydrazones, and the highly stereoselective reactions tolerate electrophilic functionality in both coupling components. Second, radical precursors may be linked to chiral α-hydroxyhydrazones via a silicon tether to the hydroxyl group; conformational constraints impart stereocontrol during 5-exo radical cyclization under stannyl- or thiyl-mediated conditions. The silicon tether may later be removed to reveal the formal adducts of hydroxymethyl, vinyl, acetyl, and 2-oxoethyl radicals to the C=N bond. Methodology development and applications to biologically important targets are discussed. PMID:21842359

  18. Fuzzy Number Addition with the Application of Horizontal Membership Functions.

    PubMed

    Piegat, Andrzej; Pluciński, Marcin

    2015-01-01

    The paper presents addition of fuzzy numbers realised with the application of the multidimensional RDM arithmetic and horizontal membership functions (MFs). Fuzzy arithmetic (FA) is a very difficult task because operations should be performed here on multidimensional information granules. Instead, a lot of FA methods use α-cuts in connection with 1-dimensional classical interval arithmetic that operates not on multidimensional granules but on 1-dimensional intervals. Such approach causes difficulties in calculations and is a reason for arithmetical paradoxes. The multidimensional approach allows for removing drawbacks and weaknesses of FA. It is possible thanks to the application of horizontal membership functions which considerably facilitate calculations because now uncertain values can be inserted directly into equations without using the extension principle. The paper shows how the addition operation can be realised on independent fuzzy numbers and on partly or fully dependent fuzzy numbers with taking into account the order relation and how to solve equations, which can be a difficult task for 1-dimensional FAs. PMID:26199953

  19. From waste to functional additive: toughening epoxy resin with lignin.

    PubMed

    Liu, Wanshuang; Zhou, Rui; Goh, Hwee Li Sally; Huang, Shu; Lu, Xuehong

    2014-04-23

    A novel approach to toughen epoxy resin with lignin, a common waste material from the pulp and paper industry, is presented in this article. First, carboxylic acid-functionalized alkali lignin (AL-COOH) was prepared and subsequently incorporated into anhydride-cured epoxy networks via a one-pot method. The results of mechanical tests show that covalent incorporation of rigid AL-COOH into epoxy networks can significantly toughen the epoxy matrix without deteriorating its tensile strength and modulus. The addition of 1.0 wt % AL-COOH gives increases of 68 and 164% in the critical stress intensity factor (K(IC)) and critical strain energy release rate (G(IC)), respectively, relative to that of neat epoxy. This article opens up the possibility of utilizing low-cost and renewable lignin feedstocks as effective toughening agents for thermoset polymers. PMID:24660855

  20. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  1. Recognition of additional roles for immunoglobulin domains in immune function

    PubMed Central

    Cannon, John P.; Dishaw, Larry J.; Haire, Robert N.; Litman, Ronda T.; Ostrov, David A.; Litman, Gary W.

    2010-01-01

    Characterization of immune receptors found in phylogenetically disparate species at the genetic, structural and functional levels has provided unique insight into the evolutionary acquisition of immune function. The roles of variable- and intermediate-type immunoglobulin (Ig) domains in direct recognition of ligands and other functions are far wider than previously anticipated. Common mechanisms of multigene family diversification and expansion as well as unique adaptations that relate to function continue to provide unique insight into the numerous patterns, processes and complex interactions that regulate the host response to infectious challenge. PMID:20004115

  2. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  3. Functions of Propolis as a natural feed additive in poultry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Propolis is a resinous hive product collected by honeybees from various sources of plants. Numerous scientific investigations have been focused on the biological activities of propolis and its functions as a health supplement in humans. It could have similar function in other animals, such as poultr...

  4. Additional developments regarding manifest dream structure and function.

    PubMed

    Wolowitz, H

    1998-06-01

    Detailed observation of manifest dream sequences indicated self-advocating occurrences facilitating the dreamer's self interests, opposed by self-adversarial interferences. Further examination of manifest dream syntactical structure additionally suggested a recurrent, four-step, algorithm for personal problem-solving within an interpersonal matrix consisting of the following cycle: (1) an opening scene setting the stage, (2) for the emergence of a self-concern, (3) which evokes a strategy to deal with dreamer's self-concern, (4) that eventuates in a consequence of the strategy. These steps repeat until the dream ends. Observing these manifest dream structural features, attributable to broadening past theorizing with "bottom-up" approaches, clarifies the dream's problem-solving process by providing an empirical, observable framework for dream interpretation and by contributing to their consensual validation. PMID:9656284

  5. Searching for additional endocrine functions of the skeleton: genetic approaches and implications for therapeutics

    PubMed Central

    Wei, Jianwen; Flaherty, Stephen; Karsenty, Gerard

    2016-01-01

    Our knowledge of whole organism physiology has greatly advanced in the past decades through mouse genetics. In particular, genetic studies have revealed that most organs interact with one another through hormones in order to maintain normal physiological functions and the homeostasis of the entire organism. Remarkably, through these studies many unexpected novel endocrine means to regulate physiological functions have been uncovered. The skeletal system is one example. In this article, we review a series of studies that over the years have identified bone as an endocrine organ. The mechanism of action, pathological relevance, and therapeutic implications of the functions of the bone-derived hormone osteocalcin are discussed. In the last part of this review we discuss the possibility that additional endocrine functions of the skeleton may exist.

  6. 21 CFR 14.142 - Functions of a color additive advisory committee.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Functions of a color additive advisory committee... SERVICES GENERAL PUBLIC HEARING BEFORE A PUBLIC ADVISORY COMMITTEE Color Additive Advisory Committees § 14.142 Functions of a color additive advisory committee. (a) A color additive advisory committee...

  7. 21 CFR 14.142 - Functions of a color additive advisory committee.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Functions of a color additive advisory committee... SERVICES GENERAL PUBLIC HEARING BEFORE A PUBLIC ADVISORY COMMITTEE Color Additive Advisory Committees § 14.142 Functions of a color additive advisory committee. (a) A color additive advisory committee...

  8. Additional Treatments Offer Little Benefit for Pancreatic Cancer: Study

    MedlinePlus

    ... 158633.html Additional Treatments Offer Little Benefit for Pancreatic Cancer: Study Neither extra chemotherapy drug nor add-on ... 2016 (HealthDay News) -- Additional treatments for locally advanced pancreatic cancer don't appear to boost survival, a new ...

  9. A Study of Additional Costs of Second Language Instruction.

    ERIC Educational Resources Information Center

    McEwen, Nelly

    A study was conducted whose primary aim was to identify and explain additional costs incurred by Alberta, Canada school jurisdictions providing second language instruction in 1980. Additional costs were defined as those which would not have been incurred had the second language program not been in existence. Three types of additional costs were…

  10. Evaluation of the Performance of Smoothing Functions in Generalized Additive Models for Spatial Variation in Disease

    PubMed Central

    Siangphoe, Umaporn; Wheeler, David C.

    2015-01-01

    Generalized additive models (GAMs) with bivariate smoothing functions have been applied to estimate spatial variation in risk for many types of cancers. Only a handful of studies have evaluated the performance of smoothing functions applied in GAMs with regard to different geographical areas of elevated risk and different risk levels. This study evaluates the ability of different smoothing functions to detect overall spatial variation of risk and elevated risk in diverse geographical areas at various risk levels using a simulation study. We created five scenarios with different true risk area shapes (circle, triangle, linear) in a square study region. We applied four different smoothing functions in the GAMs, including two types of thin plate regression splines (TPRS) and two versions of locally weighted scatterplot smoothing (loess). We tested the null hypothesis of constant risk and detected areas of elevated risk using analysis of deviance with permutation methods and assessed the performance of the smoothing methods based on the spatial detection rate, sensitivity, accuracy, precision, power, and false-positive rate. The results showed that all methods had a higher sensitivity and a consistently moderate-to-high accuracy rate when the true disease risk was higher. The models generally performed better in detecting elevated risk areas than detecting overall spatial variation. One of the loess methods had the highest precision in detecting overall spatial variation across scenarios and outperformed the other methods in detecting a linear elevated risk area. The TPRS methods outperformed loess in detecting elevated risk in two circular areas. PMID:25983545

  11. Interactive effects between N addition and disturbance on boreal forest ecosystem structure and function

    NASA Astrophysics Data System (ADS)

    Nordin, Annika; Strengbom, Joachim; From, Fredrik

    2014-05-01

    In management of boreal forests, nitrogen (N) enrichment from atmospheric deposition or from forest fertilization can appear in combination with land-use related disturbances, i.e. tree harvesting by clear-felling. Long-term interactive effects between N enrichment and disturbance on boreal forest ecosystem structure and function are, however, poorly known. We investigated effects of N enrichment by forest fertilization done > 25 years ago on forest understory species composition in old-growth (undisturbed) forests, and in forests clear-felled 10 years ago (disturbed). In clear-felled forests we also investigated effects of the previous N addition on growth of tree saplings. The results show that the N enrichment effect on the understory species composition was strongly dependent on the disturbance caused by clear-felling. In undisturbed forests, there were small or no effects on understory species composition from N addition. In contrast, effects were large in forests first exposed to N addition and subsequently disturbed by clear-felling. Effects of N addition differed among functional groups of plants. Abundance of graminoids increased (+232%) and abundance of dwarf shrubs decreased (-44%) following disturbance in N fertilized forests. For vascular plants, the two perturbations had contrasting effects on α-(within forests) and β-diversity (among forests): in disturbed forests, N addition reduced, or had no effect on α-diversity, while β-diversity increased. For bryophytes, negative effects of disturbance on α-diversity were smaller in N fertilized forests than in forests not fertilized, while neither N addition nor disturbance had any effects on β-diversity. Moreover, sapling growth in forests clear-felled 10 years ago was significantly higher in previously N fertilized forests than in forests not fertilized. Our study show that effects of N addition on plant communities may appear small, short-lived, or even absent until exposed to a disturbance. This

  12. Proposal for manipulating functional interface properties of composite organic semiconductors with addition of designed macromolecules.

    PubMed

    Maniadis, P; Lookman, T; Saxena, A; Smith, D L

    2012-06-22

    The arrangement of the electronic levels in an interface between organic semiconductors is crucial for the operation of devices such as solar cells and light emitting diodes. With the addition of designed macromolecules, we show that it is possible to control the relative position of the highest occupied molecular orbital and lowest unoccupied molecular orbital levels, and consequently improve the performance. The designed macromolecules consist of two end segments, each compatible with one of the interface components, and a central segment which adds functionality to the interface. The tails control the position and the orientation of the functional units. When the central functional unit is an electric dipole, an electrostatic field is created due to the orientation of the dipoles, which shifts the electronic levels in a controlled way. We develop a theoretical framework, based on self-consistent field theory, to study the concentration and the orientation of the central functional units. We find that the levels can shift by as much as several tenths of an eV. PMID:23004659

  13. Phospha-Michael Addition as a New Click Reaction for Protein Functionalization.

    PubMed

    Lee, Yan-Jiun; Kurra, Yadagiri; Liu, Wenshe R

    2016-03-15

    A new type of click reaction between an alkyl phosphine and acrylamide was developed and applied for site-specific protein labeling in vitro and in live cells. Acrylamide is a small electrophilic olefin that readily undergoes phospha-Michael addition with an alkyl phosphine. Our kinetic study indicated a second-order rate constant of 0.07 m(-1)  s(-1) for the reaction between tris(2-carboxyethyl)phosphine and acrylamide at pH 7.4. To demonstrate its application in protein functionalization, we used a dansyl-phosphine conjugate to successfully label proteins that were site-specifically installed with N(ɛ) -acryloyl-l-lysine and employed a biotin-phosphine conjugate to selectively probe human proteins that were metabolically labeled with N-acryloyl-galactosamine. PMID:26756316

  14. Electrostatic Levitation for Studies of Additive Manufactured Materials

    NASA Technical Reports Server (NTRS)

    SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

    2014-01-01

    The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL

  15. BIG FROG WILDERNESS STUDY AREA AND ADDITIONS, TENNESSEE AND GEORGIA.

    USGS Publications Warehouse

    Slack, John F.; Gazdik, Gertrude C.

    1984-01-01

    A mineral-resource survey was made of the Big Frog Wilderness Study Area and additions, Tennessee-Georgia. Geochemical sampling found traces of gold, zinc, copper, and arsenic in rocks, stream sediments, and panned concentrates, but not in sufficient quantities to indicate the presence of deposits of these metals. The results of the survey indicate that there is little promise for the occurrence of metallic mineral deposits within the study area. The only apparent resources are nonmetallic commodities including rock suitable for construction materials, and small amounts of sand and gravel; however, these commodities are found in abundance outside the study area. A potential may exist for oil and natural gas at great depths, but this cannot be evaluated by the present study.

  16. Recommended Protocol for Round Robin Studies in Additive Manufacturing

    PubMed Central

    Moylan, Shawn; Brown, Christopher U.; Slotwinski, John

    2016-01-01

    One way to improve confidence and encourage proliferation of additive manufacturing (AM) technologies and parts is by generating more high quality data describing the performance of AM processes and parts. Many in the AM community see round robin studies as a way to generate large data sets while distributing the cost among the participants, thereby reducing the cost to individual users. The National Institute of Standards and Technology (NIST) has conducted and participated in several of these AM round robin studies. While the results of these studies are interesting and informative, many of the lessons learned in conducting these studies concern the logistics and methods of the study and unique issues presented by AM. Existing standards for conducting interlaboratory studies of measurement methods, along with NIST’s experience, form the basis for recommended protocols for conducting AM round robin studies. The role of round robin studies in AM qualification, some of the limitations of round robin studies, and the potential benefit of less formal collaborative experiments where multiple factors, AM machine being only one, are varied simultaneously are also discussed. PMID:27274602

  17. Genotoxicity studies of the food additive ester gum.

    PubMed

    Mukherjee, A; Agarwal, K; Chakrabarti, J

    1992-07-01

    Ester gum (EG) is used in citrus oil-based beverage flavourings as a weighting or colouring agent. In the present study, concentrations of 50, 100 and 150 mg/kg body weight were administered orally to male Swiss albino mice, and sister chromatid exchange and chromosomal aberration were used as the cytogenetic endpoints to determine the genotoxic and clastogenic potential of the food additive. Although EG was weakly clastogenic and could induce a marginal increase in sister chromatid exchange frequencies, it was not a potential health hazard at the doses tested. PMID:1521837

  18. Making intelligent systems team players: Additional case studies

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Schreckenghost, Debra L.; Rhoads, Ron W.

    1993-01-01

    Observations from a case study of intelligent systems are reported as part of a multi-year interdisciplinary effort to provide guidance and assistance for designers of intelligent systems and their user interfaces. A series of studies were conducted to investigate issues in designing intelligent fault management systems in aerospace applications for effective human-computer interaction. The results of the initial study are documented in two NASA technical memoranda: TM 104738 Making Intelligent Systems Team Players: Case Studies and Design Issues, Volumes 1 and 2; and TM 104751, Making Intelligent Systems Team Players: Overview for Designers. The objective of this additional study was to broaden the investigation of human-computer interaction design issues beyond the focus on monitoring and fault detection in the initial study. The results of this second study are documented which is intended as a supplement to the original design guidance documents. These results should be of interest to designers of intelligent systems for use in real-time operations, and to researchers in the areas of human-computer interaction and artificial intelligence.

  19. Brief Report: Additive and Subtractive Counterfactual Reasoning of Children with High-Functioning Autism Spectrum Disorders

    ERIC Educational Resources Information Center

    Begeer, Sander; Terwogt, Mark Meerum; Lunenburg, Patty; Stegge, Hedy

    2009-01-01

    The development of additive ("If only I had done...") and subtractive ("If only I had not done....") counterfactual reasoning was examined in children with High Functioning Autism Spectrum Disorders (HFASD) (n = 72) and typically developing controls (n = 71), aged 6-12 years. Children were presented four stories where they could generate…

  20. Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants.

    PubMed

    Cox, Sophie C; Jamshidi, Parastoo; Eisenstein, Neil M; Webber, Mark A; Hassanin, Hany; Attallah, Moataz M; Shepherd, Duncan E T; Addison, Owen; Grover, Liam M

    2016-07-01

    Additive manufacturing technologies have been utilised in healthcare to create patient-specific implants. This study demonstrates the potential to add new implant functionality by further exploiting the design flexibility of these technologies. Selective laser melting was used to manufacture titanium-based (Ti-6Al-4V) implants containing a reservoir. Pore channels, connecting the implant surface to the reservoir, were incorporated to facilitate antibiotic delivery. An injectable brushite, calcium phosphate cement, was formulated as a carrier vehicle for gentamicin. Incorporation of the antibiotic significantly (p=0.01) improved the compressive strength (5.8±0.7MPa) of the cement compared to non-antibiotic samples. The controlled release of gentamicin sulphate from the calcium phosphate cement injected into the implant reservoir was demonstrated in short term elution studies using ultraviolet-visible spectroscopy. Orientation of the implant pore channels were shown, using micro-computed tomography, to impact design reproducibility and the back-pressure generated during cement injection which ultimately altered porosity. The amount of antibiotic released from all implant designs over a 6hour period (<28% of the total amount) were found to exceed the minimum inhibitory concentrations of Staphylococcus aureus (16μg/mL) and Staphylococcus epidermidis (1μg/mL); two bacterial species commonly associated with periprosthetic infections. Antibacterial efficacy was confirmed against both bacterial cultures using an agar diffusion assay. Interestingly, pore channel orientation was shown to influence the directionality of inhibition zones. Promisingly, this work demonstrates the potential to additively manufacture a titanium-based antibiotic eluting implant, which is an attractive alternative to current treatment strategies of periprosthetic infections. PMID:27127071

  1. RAMSEYS DRAFT WILDERNESS STUDY AREA AND ADDITION, VIRGINIA.

    USGS Publications Warehouse

    Lesure, Frank G.; Mory, Peter C.

    1984-01-01

    Mineral-resource surveys of the Ramseys Draft Wilderness Study Area and adjoining roadless area addition in George Washington National Forest in the western valley and ridge province, Augusta and Highland Counties, Virginia, were done. The surveys outlined three small areas containing anomalous amounts of copper, lead, and zinc related to stratabound red-bed copper mineralization, but these occurrences are not large and are not considered as having mineral-resource potential. The area contains abundant sandstone suitable for construction materials and shale suitable for making brick, tile, and other low-grade ceramic products, but these commodities occur in abundance outside the wilderness study area. Structural conditions are probably favorable for the accumulation of natural gas, but exploratory drilling has not been done sufficiently near the area to evaluate the gas potential.

  2. Preparation and ageing-resistant properties of polyester composites modified with functional nanoscale additives

    NASA Astrophysics Data System (ADS)

    Guo, Gang; Shi, Qiwu; Luo, Yanbing; Fan, Rangrang; Zhou, Liangxue; Qian, Zhiyong; Yu, Jie

    2014-05-01

    This study investigated ageing-resistant properties of carboxyl-terminated polyester (polyethylene glycol terephthalate) composites modified with nanoscale titanium dioxide particles (nano-TiO2). The nano-TiO2 was pretreated by a dry coating method, with aluminate coupling agent as a functional grafting additive. The agglomeration resistance was evaluated, which exhibited significant improvement for the modified nanoparticles. Then, the effects of the modified nano-TiO2 on the crosslinking and ageing-resistant properties of the composites were studied. With a real-time Fourier transform infrared (FT-IR) measurement, the nano-TiO2 displayed promoting effect on the crosslinking of polyester resin with triglycidyl isocyanurate (TGIC) as crosslinking agent. Moreover, the gloss retention, colour aberration and the surface morphologies of the composites during accelerated UV ageing (1500 hours) were investigated. The results demonstrated much less degree of ageing degradation for the nanocomposites, indicating an important role of the nano-TiO2 in improving the ageing-resistant properties of synthetic polymer composites.

  3. Preparation and ageing-resistant properties of polyester composites modified with functional nanoscale additives.

    PubMed

    Guo, Gang; Shi, Qiwu; Luo, Yanbing; Fan, Rangrang; Zhou, Liangxue; Qian, Zhiyong; Yu, Jie

    2014-01-01

    This study investigated ageing-resistant properties of carboxyl-terminated polyester (polyethylene glycol terephthalate) composites modified with nanoscale titanium dioxide particles (nano-TiO2). The nano-TiO2 was pretreated by a dry coating method, with aluminate coupling agent as a functional grafting additive. The agglomeration resistance was evaluated, which exhibited significant improvement for the modified nanoparticles. Then, the effects of the modified nano-TiO2 on the crosslinking and ageing-resistant properties of the composites were studied. With a real-time Fourier transform infrared (FT-IR) measurement, the nano-TiO2 displayed promoting effect on the crosslinking of polyester resin with triglycidyl isocyanurate (TGIC) as crosslinking agent. Moreover, the gloss retention, colour aberration and the surface morphologies of the composites during accelerated UV ageing (1500 hours) were investigated. The results demonstrated much less degree of ageing degradation for the nanocomposites, indicating an important role of the nano-TiO2 in improving the ageing-resistant properties of synthetic polymer composites. PMID:24872802

  4. Modification of Polymer Network Properties through the Addition of Functional Nanogel Particles

    NASA Astrophysics Data System (ADS)

    Liu, JianCheng

    Multifunctional acrylic and methacrylic monomers have been widely applied in many photopolymerization applications to produce crosslinked polymers with advantages such as rapid curing, broad choices of commercially available monomers and desirable physical and mechanical properties. However, there still remain critical challenges for these materials during polymerization including limited conversion and early onset of gelation as well as the generation of significant polymerization shrinkage and stress. This thesis explores the effects of network property modification through the addition of polymeric nanoparticles or nanogels. In order to understand the relationship between nanogel structure and composite material properties, nanogels with different architectures and functionalities were studied during polymerization in terms of kinetics, shrinkage and stress reduction, mechanical performance and reaction mechanisms. Nanogel composite formulations were evaluated to understand the interaction between nanogel structure with the resin matrix during polymerization through adjustment of nanogel branching densities and reactivity of polymer chain ends. It was found that both the chemical crosslinking from reactive chain ends and physical entanglements of high branching density nanogels with the resin matrix dramatically could improve final material mechanical strength. The reductions in overall volumetric shrinkage and shrinkage stress were found to follow at least proportional behavior with respect to nanogel loading concentration while maintaining similar final conversion and modulus results compared with the control resin. Nanogels containing unique functionalities were designed in order to modify reaction mechanism during secondary polymerization. A nanogel containing an integrated photoinitiator and active chain-end RAFT groups was able to initiate secondary polymerization from the nanogel phase so that localized polymerization was achieved from the beginning of

  5. Mutations in RIT1 cause Noonan syndrome - additional functional evidence and expanding the clinical phenotype.

    PubMed

    Koenighofer, M; Hung, C Y; McCauley, J L; Dallman, J; Back, E J; Mihalek, I; Gripp, K W; Sol-Church, K; Rusconi, P; Zhang, Z; Shi, G-X; Andres, D A; Bodamer, O A

    2016-03-01

    RASopathies are a clinically heterogeneous group of conditions caused by mutations in 1 of 16 proteins in the RAS-mitogen activated protein kinase (RAS-MAPK) pathway. Recently, mutations in RIT1 were identified as a novel cause for Noonan syndrome. Here we provide additional functional evidence for a causal role of RIT1 mutations and expand the associated phenotypic spectrum. We identified two de novo missense variants p.Met90Ile and p.Ala57Gly. Both variants resulted in increased MEK-ERK signaling compared to wild-type, underscoring gain-of-function as the primary functional mechanism. Introduction of p.Met90Ile and p.Ala57Gly into zebrafish embryos reproduced not only aspects of the human phenotype but also revealed abnormalities of eye development, emphasizing the importance of RIT1 for spatial and temporal organization of the growing organism. In addition, we observed severe lymphedema of the lower extremity and genitalia in one patient. We provide additional evidence for a causal relationship between pathogenic mutations in RIT1, increased RAS-MAPK/MEK-ERK signaling and the clinical phenotype. The mutant RIT1 protein may possess reduced GTPase activity or a diminished ability to interact with cellular GTPase activating proteins; however the precise mechanism remains unknown. The phenotypic spectrum is likely to expand and includes lymphedema of the lower extremities in addition to nuchal hygroma. PMID:25959749

  6. The Use of Additive Manufacturing for Fabrication of Multi-Function Small Satellite Structures

    SciTech Connect

    Horais, Brian J; Love, Lonnie J; Dehoff, Ryan R

    2013-01-01

    The use of small satellites in constellations is limited only by the growing functionality of smallsats themselves. Additive manufacturing provides exciting new design opportunities for development of multifunction CubeSat structures that integrate such functions as propulsion and thermal control into the satellite structures themselves. Manufacturing of these complex multifunction structures is now possible in lightweight, high strength, materials such as titanium by using existing electron beam melting additive manufacturing processes. However, the use of today's additive manufacturing capabilities is often cost-prohibitive for small companies due to the large capital investments required. To alleviate this impediment the U.S. Department of Energy has established a Manufacturing Demonstration Facility (MDF) at their Oak Ridge National Laboratory (ORNL) in Tennessee that provides industry access to a broad range of energy-efficient additive manufacturing equipment for collaborative use by both small and large organizations. This paper presents a notional CubeSat multifunction design that integrates the propulsion system into a three-unit (3U) CubeSat structure. The full-scale structure has been designed and fabricated at the ORNL MDF. The use of additive manufacturing for spacecraft fabrication is opening up many new possibilities in design and fabrication capabilities for what had previously been impossible structures to fabricate.

  7. Switch of SpnR function from activating to inhibiting quorum sensing by its exogenous addition.

    PubMed

    Takayama, Yuriko; Kato, Norihiro

    2016-09-01

    The opportunistic human pathogen Serratia marcescens AS-1 produces the N-hexanoylhomoserine lactone (C6HSL) receptor SpnR, a homologue of LuxR from Vibrio fischeri, which activates pig clusters to produce the antibacterial prodigiosin. In this study, we attempted to artificially regulate quorum sensing (QS) by changing the role of SpnR in N-acylhomoserine lactone (AHL)-mediated QS. SpnR was obtained as a fusion protein tagged with maltose-binding protein (MBP) from overexpression in Escherichia coli, and its specific affinity to C6HSL was demonstrated by quartz crystal microbalance analysis and AHL-bioassay with Chromobacterium violaceum CV026. Prodigiosin production was effectively inhibited by externally added MBP-SpnR in both wild-type AS-1 and the AHL synthase-defective mutant AS-1(ΔspnI). For the mutant, the induced amount of prodigiosin was drastically reduced to approximately 4% with the addition of 18 μM MBP-SpnR to the liquid medium, indicating 81% trapping of C6HSL. A system for inhibiting QS can be constructed by adding exogenous AHL receptor to the culture broth to keep the concentration of free AHL low, whereas intracellular SpnR naturally functions as the activator in response to QS. PMID:27387237

  8. Additional short-term plutonium urinary excretion data from the 1945-1947 plutonium injection studies

    SciTech Connect

    Moss, W.D.; Gautier, M.A.

    1986-01-01

    The amount of plutonium excreted per day following intravenous injection was shown to be significantly higher than predicted by the Langham power function model. Each of the Los Alamos National Laboratory notebooks used to record the original analytical data was studied for details that could influence the findings. It was discovered there were additional urine excretion data for case HP-3. This report presents the additional data, as well as data on case HP-6. (ACR)

  9. Compositions, Functions, and Testing of Friction Brake Materials and Their Additives

    SciTech Connect

    Blau, PJ

    2001-10-22

    The purpose of this report is to present a survey of commercial brake materials and additives, and to indicate their typical properties and functions, especially as regards their use in heavy trucks. Most truck pad and shoe materials described here were designed to wear against cast iron. Brake material test methods are also briefly described. This report does not address issues associated with the fabrication and manufacturing of brake materials. Since there are literally thousands of brake material additives, and their combinations are nearly limitless, it is impractical to list them all here. Rather, an attempt has been made to capture the primary constituents and their functions. An Appendix contains thermo-physical properties of some current and potential brake materials.

  10. Experimental Study of Additives on Viscosity biodiesel at Low Temperature

    NASA Astrophysics Data System (ADS)

    Fajar, Berkah; Sukarno

    2015-09-01

    An experimental investigation was performed to find out the viscosity of additive and biodiesel fuel mixture in the temperature range from 283 K to 318 K. Solutions to reduce the viscosity of biodiesel is to add the biodiesel with some additive. The viscosity was measured using a Brookfield Rheometer DV-II. The additives were the generic additive (Diethyl Ether/DDE) and the commercial additive Viscoplex 10-330 CFI. Each biodiesel blends had a concentration of the mixture: 0.0; 0.25; 0.5; 0.75; 1.0; and 1.25% vol. Temperature of biodiesel was controlled from 40°C to 0°C. The viscosity of biodiesel and additive mixture at a constant temperature can be approximated by a polynomial equation and at a constant concentration by exponential equation. The optimum mixture is at 0.75% for diethyl ether and 0.5% for viscoplex.

  11. Additive Manufacturing in Production: A Study Case Applying Technical Requirements

    NASA Astrophysics Data System (ADS)

    Ituarte, Iñigo Flores; Coatanea, Eric; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

    Additive manufacturing (AM) is expanding the manufacturing capabilities. However, quality of AM produced parts is dependent on a number of machine, geometry and process parameters. The variability of these parameters affects the manufacturing drastically and therefore standardized processes and harmonized methodologies need to be developed to characterize the technology for end use applications and enable the technology for manufacturing. This research proposes a composite methodology integrating Taguchi Design of Experiments, multi-objective optimization and statistical process control, to optimize the manufacturing process and fulfil multiple requirements imposed to an arbitrary geometry. The proposed methodology aims to characterize AM technology depending upon manufacturing process variables as well as to perform a comparative assessment of three AM technologies (Selective Laser Sintering, Laser Stereolithography and Polyjet). Results indicate that only one machine, laser-based Stereolithography, was feasible to fulfil simultaneously macro and micro level geometrical requirements but mechanical properties were not at required level. Future research will study a single AM system at the time to characterize AM machine technical capabilities and stimulate pre-normative initiatives of the technology for end use applications.

  12. Microplastic moves pollutants and additives to worms, reducing functions linked to health and biodiversity.

    PubMed

    Browne, Mark Anthony; Niven, Stewart J; Galloway, Tamara S; Rowland, Steve J; Thompson, Richard C

    2013-12-01

    Inadequate products, waste management, and policy are struggling to prevent plastic waste from infiltrating ecosystems [1, 2]. Disintegration into smaller pieces means that the abundance of micrometer-sized plastic (microplastic) in habitats has increased [3] and outnumbers larger debris [2, 4]. When ingested by animals, plastic provides a feasible pathway to transfer attached pollutants and additive chemicals into their tissues [5-15]. Despite positive correlations between concentrations of ingested plastic and pollutants in tissues of animals, few, if any, controlled experiments have examined whether ingested plastic transfers pollutants and additives to animals. We exposed lugworms (Arenicola marina) to sand with 5% microplastic that was presorbed with pollutants (nonylphenol and phenanthrene) and additive chemicals (Triclosan and PBDE-47). Microplastic transferred pollutants and additive chemicals into gut tissues of lugworms, causing some biological effects, although clean sand transferred larger concentrations of pollutants into their tissues. Uptake of nonylphenol from PVC or sand reduced the ability of coelomocytes to remove pathogenic bacteria by >60%. Uptake of Triclosan from PVC diminished the ability of worms to engineer sediments and caused mortality, each by >55%, while PVC alone made worms >30% more susceptible to oxidative stress. As global microplastic contamination accelerates, our findings indicate that large concentrations of microplastic and additives can harm ecophysiological functions performed by organisms. PMID:24309271

  13. Nitric oxide and S-nitrosoglutathione function additively during plant immunity.

    PubMed

    Yun, Byung-Wook; Skelly, Michael J; Yin, Minghui; Yu, Manda; Mun, Bong-Gyu; Lee, Sang-Uk; Hussain, Adil; Spoel, Steven H; Loake, Gary J

    2016-07-01

    Nitric oxide (NO) is emerging as a key regulator of diverse plant cellular processes. A major route for the transfer of NO bioactivity is S-nitrosylation, the addition of an NO moiety to a protein cysteine thiol forming an S-nitrosothiol (SNO). Total cellular levels of protein S-nitrosylation are controlled predominantly by S-nitrosoglutathione reductase 1 (GSNOR1) which turns over the natural NO donor, S-nitrosoglutathione (GSNO). In the absence of GSNOR1 function, GSNO accumulates, leading to dysregulation of total cellular S-nitrosylation. Here we show that endogenous NO accumulation in Arabidopsis, resulting from loss-of-function mutations in NO Overexpression 1 (NOX1), led to disabled Resistance (R) gene-mediated protection, basal resistance and defence against nonadapted pathogens. In nox1 plants both salicylic acid (SA) synthesis and signalling were suppressed, reducing SA-dependent defence gene expression. Significantly, expression of a GSNOR1 transgene complemented the SNO-dependent phenotypes of paraquat resistant 2-1 (par2-1) plants but not the NO-related characters of the nox1-1 line. Furthermore, atgsnor1-3 nox1-1 double mutants supported greater bacterial titres than either of the corresponding single mutants. Our findings imply that GSNO and NO, two pivotal redox signalling molecules, exhibit additive functions and, by extension, may have distinct or overlapping molecular targets during both immunity and development. PMID:26916092

  14. Academic and Social Achievement Goals: Their Additive, Interactive, and Specialized Effects on School Functioning

    ERIC Educational Resources Information Center

    Liem, Gregory Arief D.

    2016-01-01

    Background: Students' pursuit of academic and social goals has implications for school functioning. However, studies on academic and social achievement goals have been relatively independent and mainly conducted with students in culturally Western settings. Aims: Guided by multiple-goal perspectives, this study examined the role of academic and…

  15. Accessing siloxane functionalized polynorbornenes via vinyl-addition polymerization for CO2 separation membranes

    DOE PAGESBeta

    Mahurin, Shannon Mark; Sokolov, Alexei P.; Saito, Tomonori; Long, Brian K.; Gmernicki, Kevin R.; Hong, Eunice; Maroon, Christopher R.

    2016-07-06

    Here, the vinyl addition polymerization of norbornylbased monomers bearing polar functional groups is often problematic, leading to low molecular weight polymers in poor yield. Herein, we provide proof-of-principle evidence that addition-type homopolymers of siloxane substituted norbornyl-based monomers may be readily synthesized using the catalyst trans-[Ni(C6F5)2(SbPh3)2]. Polymerizations using this catalyst reached moderate to high conversion in just 5 min of polymerization and produced siloxanesubstituted polymers with molecular weights exceeding 100 kg/mol. These polymers showed excellent thermal stability (Td ≥ 362 °C) and were cast into membranes that displayed high CO2 permeability and enhanced CO2/N2 selectivity as compared to related materials.

  16. Additional F-Functions Useful for Preliminary Design of Shaped-Signature, Low-Boom, Supersonic-Cruise Aircraft

    NASA Technical Reports Server (NTRS)

    Mack, Robert J.

    1999-01-01

    Two additional low-boom F-functions have been described for use in designing low-boom, shaped-pressure-signature, supersonic-cruise aircraft. Based on the minimization studies of Seebass and George, the drag-nose shock strength trade-off modification of Darden, and the practical modification of Haglund, their use can aid in the design of conceptual low-boom aircraft, provide additional flexibility in the shaping of the low-boom aircraft nose section, and extend the applicability of shaped-pressure-signature methodology.

  17. Recyclable functionalization of silica with alcohols via dehydrogenative addition on hydrogen silsesquioxane.

    PubMed

    Moitra, Nirmalya; Kamei, Toshiyuki; Kanamori, Kazuyoshi; Nakanishi, Kazuki; Takeda, Kazuyuki; Shimada, Toyoshi

    2013-10-01

    Synthesis of class II hybrid silica materials requires the formation of covalent linkage between organic moieties and inorganic frameworks. The requirement that organosilylating agents be present to provide the organic part limits the synthesis of functional inorganic oxides, however, due to the water sensitivity and challenges concerning purification of the silylating agents. Synthesis of hybrid materials with stable molecules such as simple alcohols, rather than with these difficult silylating agents, may therefore provide a path to unprecedented functionality. Herein, we report the novel functionalization of silica with organic alcohols for the first time. Instead of using hydrolyzable organosilylating agents, we used stable organic alcohols with a Zn(II) catalyst to modify the surface of a recently discovered highly reactive macro-mesoporous hydrogen silsesquioxane (HSQ, HSiO1.5) monolith, which was then treated with water with the catalyst to form surface-functionalized silica. These materials were comprehensively characterized with FT-IR, Raman, solid-state NMR, fluorescence spectroscopy, thermal analysis, elemental analysis, scanning electron microscopy, and nitrogen adsorption-desorption measurements. The results obtained from these measurements reveal facile immobilization of organic moieties by dehydrogenative addition onto surface silane (Si-H) at room temperature with high loading and good tolerance of functional groups. The organic moieties can also be retrieved from the monoliths for recycling and reuse, which enables cost-effective and ecological use of the introduced catalytic/reactive surface functionality. Preservation of the reactivity of as-immobilized organic alcohols has been confirmed, moreover, by successfully performing copper-catalyzed azide-alkyne cycloaddition (CuAAC) "click" reactions on the immobilized silica surfaces. PMID:23977900

  18. Health studies indicate MTBE is safe gasoline additive

    SciTech Connect

    Anderson, E.V.

    1993-09-01

    Implementation of the oxygenated fuels program by EPA in 39 metropolitan areas, including Fairbanks and Anchorage, Alaska, in the winter of 1992, encountered some unexpected difficulties. Complaints of headaches, dizziness, nausea, and irritated eyes started in Fairbanks, jumped to Anchorage, and popped up in various locations in the lower 48 states. The suspected culprit behind these complaints was the main additive for oxygenation of gasoline is methyl tert-butyl ether (MTBE). A test program, hastily organized in response to these complaints, has indicated that MTBE is a safe gasoline additive. However, official certification of the safety of MTBE is still awaited.

  19. [Recent studies on corneal epithelial barrier function].

    PubMed

    Liu, F F; Li, W; Liu, Z G; Chen, W S

    2016-08-01

    Corneal epithelium, the outermost layer of eyeball, is the main route for foreign materials to enter the eye. Under physiological conditions, the corneal epithelial superficial cells form a functionally selective permeability barrier. Integral corneal epithelial barrier function not only ensures the enrolling of nutrients which is required for regular metabolism, but also prevents foreign bodies, or disease-causing microorganism invasion. Recently, a large number of clinical and experimental studies have shown that abnormal corneal epithelial barrier function is the pathological basis for many ocular diseases. In addition, some study found that corneal epithelial barrier constitutes a variety of proteins involved in cell proliferation, differentiation, apoptosis, and a series of physiological and pathological processes. This paper reviewed recent studies specifically on the corneal epithelial barrier, highlights of its structure, function and influence factors. (Chin J Ophthalmol, 2016, 52: 631-635). PMID:27562284

  20. Cinchona Alkaloid Catalyzed Sulfa-Michael Addition Reactions Leading to Enantiopure β-Functionalized Cysteines.

    PubMed

    Breman, Arjen C; Telderman, Suze E M; van Santen, Roy P M; Scott, Jamie I; van Maarseveen, Jan H; Ingemann, Steen; Hiemstra, Henk

    2015-11-01

    Sulfa-Michael additions to α,β-unsaturated N-acylated oxazolidin-2-ones and related α,β-unsaturated α-amino acid derivatives have been enantioselectively catalyzed by Cinchona alkaloids functionalized with a hydrogen bond donating group at the C6' position. The series of Cinchona alkaloids includes known C6' (thio)urea and sulfonamide derivatives and several novel species with a benzimidazole, squaramide or a benzamide group at the C6' position. The sulfonamides were especially suited as bifunctional organocatalysts as they gave the products in very good diastereoselectivity and high enantioselectivity. In particular, the C6' sulfonamides catalyzed the reaction with the α,β-unsaturated α-amino acid derivatives to afford the products in a diastereomeric ratio as good as 93:7, with the major isomer being formed in an ee of up to 99%. The products of the organocatalytic sulfa-Michael addition to α,β-unsaturated α-amino acid derivatives were subsequently converted in high yields to enantiopure β-functionalized cysteines suitable for native chemical ligation. PMID:26451627

  1. Preparation and Characterization of Nanocomposite Polymer Membranes Containing Functionalized SnO2 Additives

    PubMed Central

    Scipioni, Roberto; Gazzoli, Delia; Teocoli, Francesca; Palumbo, Oriele; Paolone, Annalisa; Ibris, Neluta; Brutti, Sergio; Navarra, Maria Assunta

    2014-01-01

    In the research of new nanocomposite proton-conducting membranes, SnO2 ceramic powders with surface functionalization have been synthesized and adopted as additives in Nafion-based polymer systems. Different synthetic routes have been explored to obtain suitable, nanometer-sized sulphated tin oxide particles. Structural and morphological characteristics, as well as surface and bulk properties of the obtained oxide powders, have been determined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared (FTIR) and Raman spectroscopies, N2 adsorption, and thermal gravimetric analysis (TGA). In addition, dynamic mechanical analysis (DMA), atomic force microscopy (AFM), thermal investigations, water uptake (WU) measurements, and ionic exchange capacity (IEC) tests have been used as characterization tools for the nanocomposite membranes. The nature of the tin oxide precursor, as well as the synthesis procedure, were found to play an important role in determining the morphology and the particle size distribution of the ceramic powder, this affecting the effective functionalization of the oxides. The incorporation of such particles, having sulphate groups on their surface, altered some peculiar properties of the resulting composite membrane, such as water content, thermo-mechanical, and morphological characteristics. PMID:24957125

  2. Enhancing the effectiveness of silicone thermal grease by the addition of functionalized carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Chen, Hongyuan; Wei, Hanxing; Chen, Minghai; Meng, Fancheng; Li, Hongbo; Li, Qingwen

    2013-10-01

    Functionalized carbon nanotubes (CNTs) were introduced into silicone grease to accompany the subsistent metallic oxide particles (micron-sized Al2O3, submicron-sized ZnO) with the aim of enhancing the thermal contact conductance of the composite grease as thermal interface materials (TIMs). The well-dispersed CNTs located among the metallic oxide particles to construct a three dimensional network structure and cooperated with them to form a highly efficient thermal transferring path. The functionalization of CNTs played a key role in achieving a good dispersion of CNTs in silicone grease matrix. The carboxylated CNTs were observed to show better dispersion in silicone grease and weaker reaction with oxide particles than pristine CNTs and amino-functionalized CNTs. Thus the thermal impedance of the silicone grease could be further decreased by 35% (as low as 0.18 cm2 K/W) with the addition of 2 wt.% carboxylated CNTs. Finally, such CNT-modified silicone grease was used to enhance the performance of high-power light emitting diode and showed the prospective applications in TIMs.

  3. Integrating products of Bessel functions with an additional exponential or rational factor

    NASA Astrophysics Data System (ADS)

    Van Deun, Joris; Cools, Ronald

    2008-04-01

    We provide two MATLAB programs to compute integrals of the form ex∏i=1kJν_i(ax)dxand 0∞xr+x∏i=1kJν_i(ax)dx with Jν_i(x) the Bessel function of the first kind and (real) order ν. The parameter m is a real number such that ∑ν+m>-1 (to assure integrability near zero), r is real and the numbers c and a are all strictly positive. The program can deliver accurate error estimates. Program summaryProgram title: BESSELINTR, BESSELINTC Catalogue identifier: AEAH_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAH_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1601 No. of bytes in distributed program, including test data, etc.: 13 161 Distribution format: tar.gz Programming language: Matlab (version ⩾6.5), Octave (version ⩾2.1.69) Computer: All supporting Matlab or Octave Operating system: All supporting Matlab or Octave RAM: For k Bessel functions our program needs approximately ( 500+140k) double precision variables Classification: 4.11 Nature of problem: The problem consists in integrating an arbitrary product of Bessel functions with an additional rational or exponential factor over a semi-infinite interval. Difficulties arise from the irregular oscillatory behaviour and the possible slow decay of the integrand, which prevents truncation at a finite point. Solution method: The interval of integration is split into a finite and infinite part. The integral over the finite part is computed using Gauss-Legendre quadrature. The integrand on the infinite part is approximated using asymptotic expansions and this approximation is integrated exactly with the aid of the upper incomplete gamma function. In the case where a rational factor is present, this factor is first expanded in a Taylor series around infinity. Restrictions: Some (and eventually all

  4. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays.

    PubMed

    Murr, L E; Gaytan, S M; Medina, F; Lopez, H; Martinez, E; Machado, B I; Hernandez, D H; Martinez, L; Lopez, M I; Wicker, R B; Bracke, J

    2010-04-28

    In this paper, we examine prospects for the manufacture of patient-specific biomedical implants replacing hard tissues (bone), particularly knee and hip stems and large bone (femoral) intramedullary rods, using additive manufacturing (AM) by electron beam melting (EBM). Of particular interest is the fabrication of complex functional (biocompatible) mesh arrays. Mesh elements or unit cells can be divided into different regions in order to use different cell designs in different areas of the component to produce various or continually varying (functionally graded) mesh densities. Numerous design elements have been used to fabricate prototypes by AM using EBM of Ti-6Al-4V powders, where the densities have been compared with the elastic (Young) moduli determined by resonant frequency and damping analysis. Density optimization at the bone-implant interface can allow for bone ingrowth and cementless implant components. Computerized tomography (CT) scans of metal (aluminium alloy) foam have also allowed for the building of Ti-6Al-4V foams by embedding the digital-layered scans in computer-aided design or software models for EBM. Variations in mesh complexity and especially strut (or truss) dimensions alter the cooling and solidification rate, which alters the alpha-phase (hexagonal close-packed) microstructure by creating mixtures of alpha/alpha' (martensite) observed by optical and electron metallography. Microindentation hardness measurements are characteristic of these microstructures and microstructure mixtures (alpha/alpha') and sizes. PMID:20308113

  5. A table of integrals of the error function. II - Additions and corrections.

    NASA Technical Reports Server (NTRS)

    Geller, M.; Ng, E. W.

    1971-01-01

    Integrals of products of error functions with other functions are presented, taking into account a combination of the error function with powers, a combination of the error function with exponentials and powers, a combination of the error function with exponentials of more complicated arguments, definite integrals from Laplace transforms, and a combination of the error function with trigonometric functions. Other integrals considered include a combination of the error function with logarithms and powers, a combination of two error functions, and a combination of the error function with other special functions.

  6. Additional Treatments Offer Little Benefit for Pancreatic Cancer: Study

    MedlinePlus

    ... of gastroenterology-pancreatology at Beaujon Hospital, in Clichy, France. The study was funded by the pharmaceutical company ... D., department of gastroenterology-pancreatology, Beaujon Hospital, Clichy, France; Deborah Schrag, M.D., M.P.H., chief ...

  7. NMR relaxometry study of plaster mortar with polymer additives

    SciTech Connect

    Jumate, E.; Manea, D.; Moldovan, D.; Fechete, R.

    2013-11-13

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T{sub 2} relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T{sub 2} distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T{sub 2} relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T{sub 2} relaxation rates corresponding to the bound water.

  8. Structural methods for studying IRES function.

    PubMed

    Kieft, Jeffrey S; Costantino, David A; Filbin, Megan E; Hammond, John; Pfingsten, Jennifer S

    2007-01-01

    Internal ribosome entry sites (IRESs) substitute RNA sequences for some or all of the canonical translation initiation protein factors. Therefore, an important component of understanding IRES function is a description of the three-dimensional structure of the IRES RNA underlying this mechanism. This includes determining the degree to which the RNA folds, the global RNA architecture, and higher resolution information when warranted. Knowledge of the RNA structural features guides ongoing mechanistic and functional studies. In this chapter, we present a roadmap to structurally characterize a folded RNA, beginning from initial studies to define the overall architecture and leading to high-resolution structural studies. The experimental strategy presented here is not unique to IRES RNAs but is adaptable to virtually any RNA of interest, although characterization of RNA-protein interactions requires additional methods. Because IRES RNAs have a specific function, we present specific ways in which the data are interpreted to gain insight into that function. We provide protocols for key experiments that are particularly useful for studying IRES RNA structure and that provide a framework onto which additional approaches are integrated. The protocols we present are solution hydroxyl radical probing, RNase T1 probing, native gel electrophoresis, sedimentation velocity analytical ultracentrifugation, and strategies to engineer RNA for crystallization and to obtain initial crystals. PMID:17913644

  9. Additional EIPC Study Analysis: Interim Report on High Priority Topics

    SciTech Connect

    Hadley, Stanton W

    2013-11-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 13 topics was developed for further analysis; this paper discusses the first five.

  10. Stability of a general mixed additive-cubic functional equation in non-Archimedean fuzzy normed spaces

    SciTech Connect

    Xu Tianzhou; Rassias, John Michael; Xu Wanxin

    2010-09-15

    We establish some stability results concerning the general mixed additive-cubic functional equation in non-Archimedean fuzzy normed spaces. In addition, we establish some results of approximately general mixed additive-cubic mappings in non-Archimedean fuzzy normed spaces. The results improve and extend some recent results.

  11. DNA--a molecule in search of additional functions: recipient of pool wave emissions? A hypothesis.

    PubMed

    Doerfler, Walter

    2010-09-01

    Almost the entire nucleotide sequence of human DNA is functionally unaccounted for, although large parts of the human genome are transcribed. The genes, as defined by current molecular biology, comprise about 1.5-2% of the DNA molecule. It is proposed that DNA encodes additional, hitherto unrecognized functions. In this discussion, the total information inside and outside the universe we live in is termed the pool or the sum total, known or unknown, of all laws, matter, energy, concepts and events. In a hypothetical model, a Gedankenexperiment, it is suggested that the total of all information emits pool waves of an unknown physical nature. They could be related to black energy or have completely different qualities. The designation pool waves should not imply any similarity to electromagnetism. Further, DNA is suggested to have the capability of interacting with the pool waves and thus permit humans - to some partly genetically determined and yet very limited extent - to perceive information from the pool. Pool emissions might be one of the forces that have been instrumental in and are still driving evolution from simple oligonucleotides to DNA with ever more complex recipient capacities. It will be a major challenge for researchers in the field to unravel these and less hypothetical undetected coding principles in DNA. It is uncertain whether the current trend to search the available DNA sequences with ever more refined computer technology on the basis of our present understanding of biology will detect unknown coding systems. For molecular medicine, research into the genetics of the most common human diseases could profit from the elucidation of presently still ephemeral codes in human DNA. Young scientists with a proven record of original research deserve support for the pursuit of unconventional ideas. This concept of granting priorities will be of the utmost importance in advancing the field beyond current concepts in molecular biology. PMID:20356684

  12. Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement

    PubMed Central

    Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

    2014-01-01

    The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications. PMID:24920906

  13. Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement.

    PubMed

    Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

    2014-01-01

    The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications. PMID:24920906

  14. The Unique and Additive Associations of Family Functioning and Parenting Practices with Disordered Eating Behaviors in Diverse Adolescents

    PubMed Central

    Berge, Jerica M.; Wall, Melanie; Larson, Nicole; Eisenberg, Marla E.; Loth, Katie A.; Neumark-Sztainer, Dianne

    2012-01-01

    Objective To examine the unique and additive associations of family functioning and parenting practices with adolescent disordered eating behaviors (i.e., dieting, unhealthy weight control behaviors, binge eating). Methods Data from EAT (Eating and Activity in Teens) 2010, a population-based study assessing eating and activity among racially/ethnically and socio-economically diverse adolescents (n = 2,793; mean age = 14.4, SD = 2.0; age range = 11–19) was used. Logistic regression models were used to examine associations between adolescent dieting and disordered eating behaviors and family functioning and parenting variables, including interactions. All analyses controlled for demographics and body mass index. Results Higher family functioning, parent connection, and parental knowledge about child’s whereabouts (e.g. who child is with, what they are doing, where they are at) were significantly associated with lower odds of engaging in dieting and disordered eating behaviors in adolescents, while parent psychological control was associated with greater odds of engaging in dieting and disordered eating behaviors. Although the majority of interactions were non-significant, parental psychological control moderated the protective relationship between family functioning and disordered eating behaviors in adolescent girls. Conclusions Clinicians and health care providers may want to discuss the importance of balancing specific parenting behaviors, such as increasing parent knowledge about child whereabouts while decreasing psychological control in order to enhance the protective relationship between family functioning and disordered eating behaviors in adolescents. PMID:23196919

  15. Erythorbyl laurate as a potential food additive with multi-functionalities: Interfacial characteristics and antioxidant activity.

    PubMed

    Park, Kyung-Min; Lee, Min Joo; Jo, Su-Kyung; Choi, Seung Jun; Lee, JaeHwan; Chang, Pahn-Shick

    2017-01-15

    The interfacial characteristics and antioxidant activities of erythorbyl laurate were investigated to provide information on practical applications as a multi-functional food additive. The critical micelle concentration (CMC) of erythorbyl laurate was 0.101mM and its foam stability was three times (half-life 24.33±0.94h) higher than that of Tween 20 (8.00±1.63h). In free radical scavenging assay, the negligible decrease in EC50 of erythorbyl laurate compared to erythorbic acid manifested that C-5 selective esterification of erythorbic acid with an acyl group (lauric acid) did not reduce the inherent antioxidant activity of the donor (erythorbic acid). Erythorbyl laurate formed lipid peroxides slower (i.e. retarded oxidation) in an emulsion system than did erythorbic acid. The localization of erythorbyl laurate as an emulsifier allowed the antioxidant molecules to be concentrated at the oil-water interface where oxidation is prevalent, which led to more effective retardation of lipid oxidation. PMID:27542455

  16. An investigation of functionalized electrolyte using succinonitrile additive for high voltage lithium-ion batteries

    NASA Astrophysics Data System (ADS)

    Chen, Renjie; Liu, Fan; Chen, Yan; Ye, Yusheng; Huang, Yongxin; Wu, Feng; Li, Li

    2016-02-01

    Succinonitrile (SN) has been used as functional additive to improve the thermal stability and broaden the oxidation electrochemical window of commercial electrolyte 1 M LiPF6/EC/DEC (1:1, by volume) for high-voltage LIBs (cathode: Li1.2Ni0.2Mn0.6O2, anode: Li). 1 wt % SN-based electrolyte showed a wide electrochemical oxidation window of 5.4 V vs Li+/Li and excellent thermal stability demonstrated by thermogravimetry (TG) and X-ray photoelectron spectroscopy (XPS), as well as theoretical analysis according to molecular orbital theory. The LNMO (Li1.2Ni0.2Mn0.6O2) battery with 1 wt % SN-based electrolyte showed better cyclability and capacity retention when charged to higher cut-off voltage. The improved battery performance is mainly attributed to the formation of uniform cathode electrolyte interface (CEI) formed by interfacial reactions between the LNMO cathode and electrolyte. The outcome of this work and the continuous research on this subject can generate critical knowledge for designing thermal stability electrolytes for large format lithium-ion batteries.

  17. Covalent Functionalization of Fluorinated Graphene and Subsequent Application as Water-based Lubricant Additive.

    PubMed

    Ye, Xiangyuan; Ma, Limin; Yang, Zhigang; Wang, Jinqing; Wang, Honggang; Yang, Shengrong

    2016-03-23

    Although the fluorinated graphene (FG) possesses numerous excellent properties, it can not be really applied in aqueous environments due to its high hydrophobicity. Therefore, how to achieve hydrophilic FG is a challenge. Here, a method of solvent-free urea melt synthesis is developed to prepare the hydrophilic urea-modified FG (UFG). Some characterizations via transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transfer infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and thermo gravimetric analysis (TGA) demonstrate that the urea molecules can covalently functionalize the FG and the hydrophilic UFG can be prepared. According to the tribological tests run on an optimal-SRV-I reciprocation friction tester, it can be found that the antiwear ability of water can be largely improved by adding the appropriate UFG. When the concentration of UFG aqueous dispersion is 1 mg/mL, the sample of UFG-1 has the best antiwear ability with a 64.4% decrease of wear rate compared with that of the pure water (UFG-0), demonstrating the prepared UFG can be used as a novel and effective water-based lubricant additive. PMID:26923174

  18. Generalized theory of resonance scattering (GTRS) using the translational addition theorem for spherical wave functions.

    PubMed

    Mitri, Farid

    2014-11-01

    The generalized theory of resonance scattering (GTRS) by an elastic spherical target in acoustics is extended to describe the arbitrary scattering of a finite beam using the addition theorem for the spherical wave functions of the first kind under a translation of the coordinate origin. The advantage of the proposed method over the standard discrete spherical harmonics transform previously used in the GTRS formalism is the computation of the off-axial beam-shape coefficients (BSCs) stemming from a closed-form partial-wave series expansion representing the axial BSCs in spherical coordinates. With this general method, the arbitrary acoustical scattering can be evaluated for any particle shape and size, whether the particle is partially or completely illuminated by the incident beam. Numerical examples for the axial and off-axial resonance scattering from an elastic sphere placed arbitrarily in the field of a finite circular piston transducer with uniform vibration are provided. Moreover, the 3-D resonance directivity patterns illustrate the theory and reveal some properties of the scattering. Numerous applications involving the scattering phenomenon in imaging, particle manipulation, and the characterization of multiphase flows can benefit from the present analysis because all physically realizable beams radiate acoustical waves from finite transducers as opposed to waves of infinite extent. PMID:25389166

  19. Influence of Polarization on Carbohydrate Hydration: A Comparative Study Using Additive and Polarizable Force Fields.

    PubMed

    Pandey, Poonam; Mallajosyula, Sairam S

    2016-07-14

    Carbohydrates are known to closely modulate their surrounding solvent structures and influence solvation dynamics. Spectroscopic investigations studying far-IR regions (below 1000 cm(-1)) have observed spectral shifts in the libration band (around 600 cm(-1)) of water in the presence of monosaccharides and polysaccharides. In this paper, we use molecular dynamics simulations to gain atomistic insight into carbohydrate-water interactions and to specifically highlight the differences between additive (nonpolarizable) and polarizable simulations. A total of six monosaccharide systems, α and β anomers of glucose, galactose, and mannose, were studied using additive and polarizable Chemistry at HARvard Macromolecular Mechanics (CHARMM) carbohydrate force fields. Solvents were modeled using three additive water models TIP3P, TIP4P, and TIP5P in additive simulations and polarizable water model SWM4 in polarizable simulations. The presence of carbohydrate has a significant effect on the microscopic water structure, with the effects being pronounced for proximal water molecules. Notably, disruption of the tetrahedral arrangement of proximal water molecules was observed due to the formation of strong carbohydrate-water hydrogen bonds in both additive and polarizable simulations. However, the inclusion of polarization resulted in significant water-bridge occupancies, improved ordered water structures (tetrahedral order parameter), and longer carbohydrate-water H-bond correlations as compared to those for additive simulations. Additionally, polarizable simulations also allowed the calculation of power spectra from the dipole-dipole autocorrelation function, which corresponds to the IR spectra. From the power spectra, we could identify spectral signatures differentiating the proximal and bulk water structures, which could not be captured from additive simulations. PMID:27266974

  20. Spectra-temporal patterns underlying mental addition: an ERP and ERD/ERS study.

    PubMed

    Ku, Yixuan; Hong, Bo; Gao, Xiaorong; Gao, Shangkai

    2010-03-12

    Functional neuroimaging data have shown that mental calculation involves fronto-parietal areas that are composed of different subsystems shared with other cognitive functions such as working memory and language. Event-related potential (ERP) analysis has also indicated sequential information changes during the calculation process. However, little is known about the dynamic properties of oscillatory networks in this process. In the present study, we applied both ERP and event-related (de-)synchronization (ERS/ERD) analyses to EEG data recorded from normal human subjects performing tasks for sequential visual/auditory mental addition. Results in the study indicate that the late positive components (LPCs) can be decomposed into two separate parts. The earlier element LPC1 (around 360ms) reflects the computing attribute and is more prominent in calculation tasks. The later element LPC2 (around 590ms) indicates an effect of number size and appears larger only in a more complex 2-digit addition task. The theta ERS and alpha ERD show modality-independent frontal and parietal differential patterns between the mental addition and control groups, and discrepancies are noted in the beta ERD between the 2-digit and 1-digit mental addition groups. The 2-digit addition (both visual and auditory) results in similar beta ERD patterns to the auditory control, which may indicate a reliance on auditory-related resources in mental arithmetic, especially with increasing task difficulty. These results coincide with the theory of simple calculation relying on the visuospatial process and complex calculation depending on the phonological process. PMID:20105450

  1. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality. PMID:26515667

  2. Synthesis and Characterization of Amine Functionalized Vegetable Oil as Lubricant Additive

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The majority of the lubricants and additives currently used are petroleum based that are toxic to the environment, making it increasingly difficult for safe and easy disposal. There has been an increasing demand for green lubricants and lubricant additives in recent years due to concerns about thei...

  3. Is the structural diversity of tripeptides sufficient for developing functional food additives with satisfactory multiple bioactivities?

    NASA Astrophysics Data System (ADS)

    Wang, Jian-Hui; Liu, Yong-Le; Ning, Jing-Heng; Yu, Jian; Li, Xiang-Hong; Wang, Fa-Xiang

    2013-05-01

    Multifunctional peptides have attracted increasing attention in the food science community because of their therapeutic potential, low toxicity and rapid intestinal absorption. However, previous study demonstrated that the limited structural variations make it difficult to optimize dipeptide molecules in a good balance between desirable and undesirable properties (F. Tian, P. Zhou, F. Lv, R. Song, Z. Li, J. Pept. Sci. 13 (2007) 549-566). In the present work, we attempt to answer whether the structural diversity is sufficient for a tripeptide to have satisfactory multiple bioactivities. Statistical test, structural examination and energetic analysis confirm that peptides of three amino acids long can bind tightly to human angiotensin converting enzyme (ACE) and thus exert significant antihypertensive efficacy. Further quantitative structure-activity relationship (QSAR) modeling and prediction of all 8000 possible tripeptides reveal that their ACE-inhibitory potency exhibits a good (positive) relationship to antioxidative activity, but has only a quite modest correlation with bitterness. This means that it is possible to find certain tripeptide entities possessing the optimal combination of strong ACE-inhibitory potency, high antioxidative activity and weak bitter taste, which are the promising candidates for developing multifunctional food additives with satisfactory multiple bioactivities. The marked difference between dipeptide and tripeptide can be attributed to the fact that the structural diversity of peptides increases dramatically with a slight change in sequence length.

  4. Functional relationships between leaf hydraulics and leaf economic traits in response to nutrient addition in subtropical tree species.

    PubMed

    Villagra, Mariana; Campanello, Paula I; Bucci, Sandra J; Goldstein, Guillermo

    2013-12-01

    Leaves can be both a hydraulic bottleneck and a safety valve against hydraulic catastrophic dysfunctions, and thus changes in traits related to water movement in leaves and associated costs may be critical for the success of plant growth. A 4-year fertilization experiment with nitrogen (N) and phosphorus (P) addition was done in a semideciduous Atlantic forest in northeastern Argentina. Saplings of five dominant canopy species were grown in similar gaps inside the forests (five control and five N + P addition plots). Leaf lifespan (LL), leaf mass per unit area (LMA), leaf and stem vulnerability to cavitation, leaf hydraulic conductance (K(leaf_area) and K(leaf_mass)) and leaf turgor loss point (TLP) were measured in the five species and in both treatments. Leaf lifespan tended to decrease with the addition of fertilizers, and LMA was significantly higher in plants with nutrient addition compared with individuals in control plots. The vulnerability to cavitation of leaves (P50(leaf)) either increased or decreased with the nutrient treatment depending on the species, but the average P50(leaf) did not change with nutrient addition. The P50(leaf) decreased linearly with increasing LMA and LL across species and treatments. These trade-offs have an important functional significance because more expensive (higher LMA) and less vulnerable leaves (lower P50(leaf)) are retained for a longer period of time. Osmotic potentials at TLP and at full turgor became more negative with decreasing P50(leaf) regardless of nutrient treatment. The K(leaf) on a mass basis was negatively correlated with LMA and LL, indicating that there is a carbon cost associated with increased water transport that is compensated by a longer LL. The vulnerability to cavitation of stems and leaves were similar, particularly in fertilized plants. Leaves in the species studied may not function as safety valves at low water potentials to protect the hydraulic pathway from water stress-induced cavitation

  5. Additive, modular functionalization of reactive self-assembled monolayers: toward the fabrication of multilevel optical storage media.

    PubMed

    Gentili, Denis; Barbalinardo, Marianna; Manet, Ilse; Durso, Margherita; Brucale, Marco; Mezzi, Alessio; Melucci, Manuela; Cavallini, Massimiliano

    2015-04-28

    We report a novel strategy based on iterative microcontact printing, which provides additive, modular functionalization of reactive SAMs by different functional molecules. We demonstrate that after printing the molecules form an interpenetrating network at the SAM surface preserving their individual properties. We exploited the process by fabricating new optical storage media that consist of a multilevel TAG. PMID:25824851

  6. The Use of Functional Communication Training without Additional Treatment Procedures in an Inclusive School Setting

    ERIC Educational Resources Information Center

    Casey, Sean D.; Merical, Cheryl L.

    2006-01-01

    Functional communication training (FCT) is an intervention frequently used for students with developmental disabilities to reduce problematic behaviors and to increase prosocial behaviors. This intervention appears to be very effective when the communication responses trained are matched to the function of the student's problematic behaviors. In…

  7. The Effect of Small Molecule Additives on the Self-Assembly and Functionality of Protein-Polymer Diblock Copolymers

    NASA Astrophysics Data System (ADS)

    Thomas, Carla; Xu, Liza; Olsen, Bradley

    2013-03-01

    Self-assembly of globular protein-polymer block copolymers into well-defined nanostructures provides a route towards the manufacture of protein-based materials which maintains protein fold and function. The model material mCherry-b-poly(N-isopropyl acrylamide) forms self-assembled nanostructures from aqueous solutions via solvent evaporation. To improve retention of protein functionality when dehydrated, small molecules such as trehalose and glycerol are added in solution prior to solvent removal. With as little as 10 wt% additive, improvements in retained functionality of 20-60% are observed in the solid-state as compared to samples in which no additive is present. Higher additive levels (up to 50%) continue to show improvement until approximately 100% of the protein function is retained. These large gains are hypothesized to originate from the ability of the additives to replace hydrogen bonds normally fulfilled by water. The addition of trehalose in the bulk material also improves the thermal stability of the protein by 15-20 °C, while glycerol decreases the thermal stability. Materials containing up to 50% additives remain microphase separated, and, upon incorporation of additives, nanostructure domain spacing tends to increase, accompanied by order-order transitions.

  8. Effects of Germinated Brown Rice Addition on the Flavor and Functionality of Yogurt

    PubMed Central

    2016-01-01

    This study aimed to investigate the functional and physicochemical properties of yogurt, supplemented with germinated brown rice (GBR) containing γ-aminobutyric acid (GABA), during storage. GBR was produced by soaking brown rice at 30℃, and saccharified germinated brown rice (SGBR) was produced by treating brown rice with α- and β-amylase for 1 h, at 80℃ and 60℃, respectively. Yogurt was manufactured using a commercial starter (YC-X11, CHR. Hansen, Denmark) at 37℃ for 12 h. The fatty acids and GABA contents were analyzed using GC and HPLC, respectively. The fatty acids in the cereal samples consisted of oleic, linoleic, and palmitic acid. The portion of oleic acid was the highest, at 35.65% in GBR, and 32.16% in SGBR. During germination, the oleic acid content increased, whereas linolenic and palmitic acid contents from GBR tended to decrease. Although the portion of saturated fatty acids, such as stearic and myristic acid, decreased significantly (p<0.05), that of unsaturated fatty acids, such as oleic and linoleic acid, increased with an increase in supplementation of BR, GBR, or SGBR in the yogurt. The yogurt, supplemented with cereal samples, showed a tendency of an increase in the concentration of GABA with an increase in the supplementation of the cereal samples. However, yogurt supplemented with GBR showed the highest concentration of GABA, regardless of the supplementation of the cereal samples. These results indicated that yogurt supplemented with BR, GBR, or SGBR could be a promising dairy product. PMID:27621692

  9. Functional Disorders in Neurology: Case Studies.

    PubMed

    Stone, Jon; Hoeritzauer, Ingrid; Gelauff, Jeannette; Lehn, Alex; Gardiner, Paula; van Gils, Anne; Carson, Alan

    2016-08-01

    Functional, often called psychogenic, disorders are common in neurological practice. We illustrate clinical issues and highlight some recent research findings using six case studies of functional neurological disorders. We discuss dizziness as a functional disorder, describing the relatively new consensus term Persistent Posturo-Perceptual Dizziness (PPPD), axial jerking/myoclonus as a functional movement disorder, functional speech symptoms, post-concussion disorder with functional cognitive symptoms and finally advances in treatment of dissociative seizures and functional motor disorders. PMID:27445247

  10. Ecological Optimization and Parametric Study of an Irreversible Regenerative Modified Brayton Cycle with Isothermal Heat Addition

    NASA Astrophysics Data System (ADS)

    Tyagi, Sudhir K.; Kaushik, Subhash C.; Tiwari, Vivek

    2003-12-01

    An ecological optimization along with a detailed parametric study of an irreversible regenerative Brayton heat engine with isothermal heat addition have been carried out with external as well as internal irreversibilities. The ecological function is defined as the power output minus the power loss (irreversibility) which is ambient temperature times the entropy generation rate. The external irreversibility is due to finite temperature difference between the heat engine and the external reservoirs while the internal irreversibilities are due to nonisentropic compression and expansion processes in the compressor and the turbine respectively and the regenerative heat loss. The ecological function is found to be an increasing function of the isothermal-, sink- and regenerative-side effectiveness, isothermal-side inlet temperature, component efficiencies and sink-side temperature while it is found to be a decreasing function of the isobaric-side temperature and effectiveness and the working fluid heat capacitance rate. The effects of the isobaric-side effectiveness are found to be more than those of the other parameters and the effects of turbine efficiency are found to be more than those of the compressor efficiency on all the performance parameters of the cycle.

  11. Meaning and Function of Dummy Auxiliaries in Adult Acquisition of Dutch as an Additional Language

    ERIC Educational Resources Information Center

    Julien, Manuela; van Hout, Roeland; van de Craats, Ineke

    2016-01-01

    This article presents the results of experimental data on language production and comprehension. These show that adult learners of Dutch as an additional language, with different language backgrounds, and a L2 proficiency below level A2 (Waystage) of the Common European Framework of Reference for Languages (CEFR; Council of Europe, 2001), use…

  12. Molecular aspects of aromatic C additions to soils: Implications of biochar quality for ecosystem functionality

    EPA Science Inventory

    Solid residues of incomplete combustion (biochar or char) are continuously being added to soils due to natural vegetation fires in many ecosystems. However, new strategies for carbon sequestration in soils are likely to include the active addition of biochar to soils. Since bioc...

  13. Regioselectivity of radical additions to substituted alkenes: insight from conceptual density functional theory.

    PubMed

    De Vleeschouwer, Freija; Jaque, Pablo; Geerlings, Paul; Toro-Labbé, Alejandro; De Proft, Frank

    2010-08-01

    Radical additions to substituted alkenes are among the most important reactions in radical chemistry. Nonetheless, there is still some controversy in the literature about the factors that affect the rate and regioselectivity in these addition reactions. In this paper, the orientation of (nucleophilic) radical additions to electron-rich, -neutral, and -poor monosubstituted substrates (11 reactions in total) is investigated through the use of chemical concepts and reactivity descriptors. The regioselectivity of the addition of nucleophilic radicals on electron-rich and -neutral alkenes is thermodynamically controlled. An excellent correlation of 94% is found between the differences in activation barriers and in product stabilities (unsubstituted versus substituted site attack). Polar effects at the initial stage of the reaction play a significant role when electron-poor substrates are considered, lowering the extent of regioselectivity toward the unsubstituted sites, as predicted from the stability differences. This is nicely confirmed through an analysis for each of the 11 reactions using the spin-polarized dual descriptor, matching electrophilic and nucleophilic regions. PMID:20614876

  14. Addition of Functional Content during Core Content Instruction with Students with Moderate Disabilities

    ERIC Educational Resources Information Center

    Collins, Belva C.; Hager, Karen L.; Galloway, Carey Creech

    2011-01-01

    The purpose of this investigation was to add functional content during core content instruction of language arts, science, and math. The investigation involved three middle school students with moderate disabilities who participated in the state's alternate assessment. During instruction using a constant time delay procedure to teach required…

  15. Using Additional Analyses to Clarify the Functions of Problem Behavior: An Analysis of Two Cases

    ERIC Educational Resources Information Center

    Payne, Steven W.; Dozier, Claudia L.; Neidert, Pamela L.; Jowett, Erica S.; Newquist, Matthew H.

    2014-01-01

    Functional analyses (FA) have proven useful for identifying contingencies that influence problem behavior. Research has shown that some problem behavior may only occur in specific contexts or be influenced by multiple or idiosyncratic variables. When these contexts or sources of influence are not assessed in an FA, further assessment may be…

  16. Characterization studies on the additives mixed L-arginine phosphate monohydrate (LAP) crystals

    NASA Astrophysics Data System (ADS)

    Haja Hameed, A. S.; Karthikeyan, C.; Ravi, G.; Rohani, S.

    2011-04-01

    L-arginine phosphate monohydrate (LAP), potassium thiocyanate (KSCN) mixed LAP (LAP:KSCN) and sodium sulfite (Na 2SO 3) mixed LAP (LAP:Na 2SO 3) single crystals were grown by slow cooling technique. The effect of microbial contamination and coloration on the growth solutions was studied. The crystalline powders of the grown crystals were examined by X-ray diffraction and the lattice parameters of the crystals were estimated. From the FTIR spectroscopic analysis, various functional group frequencies associated with the crystals were assigned. Vickers microhardness studies were done on {1 0 0} faces for pure and additives mixed LAP crystals. From the preliminary surface second harmonic generation (SHG) results, it was found that the SHG intensity at (1 0 0) face of LAP:KSCN crystal was much stronger than that of pure LAP.

  17. Metal-Catalyzed β-Functionalization of Michael Acceptors through Reductive Radical Addition Reactions.

    PubMed

    Streuff, Jan; Gansäuer, Andreas

    2015-11-23

    Transition-metal-catalyzed radical reactions are becoming increasingly important in modern organic chemistry. They offer fascinating and unconventional ways for connecting molecular fragments that are often complementary to traditional methods. In particular, reductive radical additions to α,β-unsaturated compounds have recently gained substantial attention as a result of their broad applicability in organic synthesis. This Minireview critically discusses the recent landmark achievements in this field in context with earlier reports that laid the foundation for today's developments. PMID:26471460

  18. Composite scaffolds for osteochondral repair obtained by combination of additive manufacturing, leaching processes and hMSC-CM functionalization.

    PubMed

    Díaz Lantada, Andrés; Alarcón Iniesta, Hernán; García-Ruíz, Josefa Predestinación

    2016-02-01

    Articular repair is a relevant and challenging area for the emerging fields of tissue engineering and biofabrication. The need of significant gradients of properties, for the promotion of osteochondral repair, has led to the development of several families of composite biomaterials and scaffolds, using different effective approaches, although a perfect solution has not yet been found. In this study we present the design, modeling, rapid manufacturing and in vitro testing of a composite scaffold aimed at osteochondral repair. The presented composite scaffold stands out for having a functional gradient of density and stiffness in the bony phase, obtained in titanium by means of computer-aided design combined with additive manufacture using selective laser sintering. The chondral phase is obtained by sugar leaching, using a PDMS matrix and sugar as porogen, and is joined to the bony phase during the polymerization of PDMS, therefore avoiding the use of supporting adhesives or additional intermediate layers. The mechanical performance of the construct is biomimetic and the stiffness values of the bony and chondral phases can be tuned to the desired applications, by means of controlled modifications of different parameters. A human mesenchymal stem cell (h-MSC) conditioned medium (CM) is used for improving scaffold response. Cell culture results provide relevant information regarding the viability of the composite scaffolds used. PMID:26652367

  19. Covalent addition of chitosan to graphene sheets: Density functional theory explorations of quadrupole coupling constants

    NASA Astrophysics Data System (ADS)

    Mokhtari, Ali; Harismah, Kun; Mirzaei, Mahmoud

    2015-12-01

    Density functional theory (DFT) calculations have been performed to detect the stabilities and properties of chitosan-functionalized graphene and graphene-oxide structures (G-Chit and GO-Chit). The model systems with two different sizes of sheets have been optimized and the molecular and atomic properties have been evaluated for them. The results indicated that investigated G-Chit and GO-Chit structures could be considered as stable structures but with different properties. The properties for GO and GO-Chit structures are almost similar; however, they are different from the original G and G-Chit structures. The results also indicated that the properties could be also size-dependent, in which different molecular and atomic properties have been observed for the investigate G sheets.

  20. Additive, modular functionalization of reactive self-assembled monolayers: toward the fabrication of multilevel optical storage media

    NASA Astrophysics Data System (ADS)

    Gentili, Denis; Barbalinardo, Marianna; Manet, Ilse; Durso, Margherita; Brucale, Marco; Mezzi, Alessio; Melucci, Manuela; Cavallini, Massimiliano

    2015-04-01

    We report a novel strategy based on iterative microcontact printing, which provides additive, modular functionalization of reactive SAMs by different functional molecules. We demonstrate that after printing the molecules form an interpenetrating network at the SAM surface preserving their individual properties. We exploited the process by fabricating new optical storage media that consist of a multilevel TAG.We report a novel strategy based on iterative microcontact printing, which provides additive, modular functionalization of reactive SAMs by different functional molecules. We demonstrate that after printing the molecules form an interpenetrating network at the SAM surface preserving their individual properties. We exploited the process by fabricating new optical storage media that consist of a multilevel TAG. Electronic supplementary information (ESI) available: Experimental details, synthesis and characterization of compounds 1, 2, 1-Sil and 2-Sil, and materials. See DOI: 10.1039/c5nr00346f

  1. On the function and homeostasis of PCSK9: reciprocal interaction with LDLR and additional lipid effects.

    PubMed

    Tavori, Hagai; Rashid, Shirya; Fazio, Sergio

    2015-02-01

    Proprotein convertase subtilisin kexin type 9 (PCSK9) is a circulatory ligand that terminates the lifecycle of the low-density lipoprotein (LDL) receptor (LDLR) thus affecting plasma LDL-cholesterol (LDL-C) levels. Recent evidence shows that in addition to the straightforward mechanism of action, there are more complex interactions between PCSK9, LDLR and plasma lipoprotein levels, including: (a) the presence of both parallel and reciprocal regulation of surface LDLR and plasma PCSK9; (b) a correlation between PCSK9 and LDL-C levels dependent not only on the fact that PCSK9 removes hepatic LDLR, but also due to the fact that up to 40% of plasma PCSK9 is physically associated with LDL; and (c) an association between plasma PCSK9 production and the assembly and secretion of triglyceride-rich lipoproteins. The effect of PCSK9 on LDLR is being successfully utilized toward the development of anti-PCSK9 therapies to reduce plasma LDL-C levels. Current biochemical research has uncovered additional mechanisms of action and interacting partners for PCSK9, and this opens the way for a more thorough understanding of the regulation, metabolism, and effects of this interesting protein. PMID:25544176

  2. A Mechanistic Study of Halogen Addition and Photoelimination from π-Conjugated Tellurophenes.

    PubMed

    Carrera, Elisa I; Lanterna, Anabel E; Lough, Alan J; Scaiano, Juan C; Seferos, Dwight S

    2016-03-01

    The ability to drive reactivity using visible light is of importance for many disciplines of chemistry and has significant implications for sustainable chemistry. Identifying photochemically active compounds and understanding photochemical mechanisms is important for the development of useful materials for synthesis and catalysis. Here we report a series of photoactive diphenyltellurophene compounds bearing electron-withdrawing and electron-donating substituents synthesized by alkyne coupling/ring closing or palladium-catalyzed ipso-arylation chemistry. The redox chemistry of these compounds was studied with respect to oxidative addition and photoelimination of bromine, which is of importance for energy storage reactions involving X2. The oxidative addition reaction mechanism was studied using density functional theory, the results of which support a three-step mechanism involving the formation of an initial η(1) association complex, a monobrominated intermediate, and finally the dibrominated product. All of the tellurophene derivatives undergo photoreduction using 430, 447, or 617 nm light depending on the absorption properties of the compound. Compounds bearing electron-withdrawing substituents have the highest photochemical quantum efficiencies in the presence of an alkene trap, with efficiencies of up to 42.4% for a pentafluorophenyl-functionalized tellurophene. The photoelimination reaction was studied in detail through bromine trapping experiments and laser flash photolysis, and a mechanism is proposed. The photoreaction, which occurs by release of bromine radicals, is competitive with intersystem crossing to the triplet state of the brominated species, as evidenced by the formation of singlet oxygen. These findings should be useful for the design of new photochemically active compounds supported by main-group elements. PMID:26853739

  3. Differential Expression of Functional Fc-Receptors and Additional Immune Complex Receptors on Mouse Kidney Cells

    PubMed Central

    Suwanichkul, Adisak; Wenderfer, Scott E.

    2013-01-01

    The precise mechanisms by which circulating immune complexes accumulate in the kidney to form deposits in glomerulonephritis are not well understood. In particular, the role of resident cells within glomeruli of the kidney has been widely debated. Immune complexes have been shown to bind one glomerular cell type (mesangial cells) leading to functional responses such as pro-inflammatory cytokine production. To further assess the presence of functional immunoreceptors on resident glomerular cells, cultured mouse renal epithelial, endothelial, and mesangial cells were treated with heat-aggregated mouse IgG or preformed murine immune complexes. Mesangial and renal endothelial cells were found to bind IgG complexes, whereas glomerular epithelial cell binding was minimal. A blocking antibody for Fc-gamma receptors reduced binding to mesangial cells but not renal endothelial cells, suggesting differential immunoreceptor utilization. RT-PCR and immunostaining based screening of cultured renal endothelial cells showed limited low-level expression of known Fc-receptors and Igbinding proteins. The interaction between mesangial cells and renal endothelial cells and immune complexes resulted in distinct, cell-specific patterns of chemokine and cytokine production. This novel pathway involving renal endothelial cells likely contributes to the predilection of circulating immune complex accumulation within the kidney and to the inflammatory responses that drive kidney injury. PMID:23911392

  4. Multi-Walled Carbon Nanotube Functionalization by Radical Addition Using Hydroxymethylene Groups.

    PubMed

    Rodríguez-Jiménez, Rubén; Alonso-Núñez, Gabriel; Paraguay-Delgado, Francisco; Espinoza-Gómez, Heriberto; Vélez-López, Ernesto; Rogel-Hernández, Eduardo

    2016-01-01

    Synthetic methodology and characterization of multi-walled carbon nanotubes (MWCNTs) function- alized with hydroxymethylene groups are reported. The MWCNTs were synthesized by the spray pyrolysis technique using toluene as carbon source and ferrocene as catalyst. Hydroxymethylation of MWCNTs was carried out by methanol using benzoyl peroxide (BPO) at different quantities (300 to 900 mg); the optimum BPO quantity was 300 mg. The resulting materials were characterized by FT-IR, Raman Spectroscopy, Thermal Gravimetric Analysis (TGA) and Transmission Electron Microscopy (TEM). The presence of the hydroxymethylene group on the MWCNTs surface was demonstrated by FT-IR, Raman Spectroscopy, TGA, EDS, TEM and Mass Spectrometry. The func- tionalized MWCNTs were not damaged by this methodology. PMID:27398563

  5. Organic-inorganic hybrid foams with diatomite addition: Effect on functional properties

    NASA Astrophysics Data System (ADS)

    Verdolotti, L.; D'Auria, M.; Lavorgna, M.; Vollaro, P.; Iannace, S.; Capasso, I.; Galzerano, B.; Caputo, D.; Liguori, B.

    2016-05-01

    Organic-inorganic hybrid foams were prepared by using metakaolin, diatomite as a partial (or total) replacement of metakaolin, as matrix, silicon and whipped protein as pore forming. The foamed systems were hardened at defined temperature and time and then characterized by mechanical point of view through compression tests and by functional point of view through fire reaction and acoustic tests. The experimental findings highlighted that the replacement of diatomite in the formulation affected the morphological structure of the foams and consequently their mechanical properties. In particular, the consolidation mechanism in the diatomite based-hybrid foams changed from geopolymerization to a silicate polycondensation mechanism. Therefore, mechanical performances enhanced with increasing of the diatomite content. Fire reaction tests, such as non-combustibility and cone calorimeter tests, showed positive thermal inertia of samples regardless of the content of diatomite.

  6. Titanium-Based Hip Stems with Drug Delivery Functionality through Additive Manufacturing.

    PubMed

    Bezuidenhout, Martin B; Dimitrov, Dimitar M; van Staden, Anton D; Oosthuizen, Gert A; Dicks, Leon M T

    2015-01-01

    Postoperative infections are a major concern in patients that receive implants. These infections generally occur in areas with poor blood flow and pathogens do not always respond to antibiotic treatment. With the latest developments in nanotechnology, the incorporation of antibiotics into prosthetic implants may soon become a standard procedure. The success will, however, depend on the ability to control the release of antibiotics at concentrations high enough to prevent the development of antibiotic-resistant strains. Through additive manufacturing, antibiotics can be incorporated into cementless femoral stems to produce prosthetic devices with antimicrobial properties. With the emerging increase in resistance to antibiotics, the incorporation of antimicrobial compounds other than antibiotics, preferably drugs with a broader spectrum of antimicrobial activity, will have to be explored. This review highlights the microorganisms associated with total hip arthroplasty (THA), discusses the advantages and disadvantages of the latest materials used in hip implants, compares different antimicrobial agents that could be incorporated, and addresses novel ideas for future research. PMID:26504776

  7. Titanium-Based Hip Stems with Drug Delivery Functionality through Additive Manufacturing

    PubMed Central

    Bezuidenhout, Martin B.; Dimitrov, Dimitar M.; van Staden, Anton D.; Oosthuizen, Gert A.; Dicks, Leon M. T.

    2015-01-01

    Postoperative infections are a major concern in patients that receive implants. These infections generally occur in areas with poor blood flow and pathogens do not always respond to antibiotic treatment. With the latest developments in nanotechnology, the incorporation of antibiotics into prosthetic implants may soon become a standard procedure. The success will, however, depend on the ability to control the release of antibiotics at concentrations high enough to prevent the development of antibiotic-resistant strains. Through additive manufacturing, antibiotics can be incorporated into cementless femoral stems to produce prosthetic devices with antimicrobial properties. With the emerging increase in resistance to antibiotics, the incorporation of antimicrobial compounds other than antibiotics, preferably drugs with a broader spectrum of antimicrobial activity, will have to be explored. This review highlights the microorganisms associated with total hip arthroplasty (THA), discusses the advantages and disadvantages of the latest materials used in hip implants, compares different antimicrobial agents that could be incorporated, and addresses novel ideas for future research. PMID:26504776

  8. Improvement of attenuation functions of a clayey sandstone for landfill leachate containment by bentonite addition.

    PubMed

    Ruiz, Ana I; Fernández, Raúl; Sánchez Jiménez, Nicanor; Rodríguez Rastrero, Manuel; Regadío, Mercedes; de Soto, Isabel S; Cuevas, Jaime

    2012-03-01

    Enhanced sand-clay mixtures have been prepared by using a sandstone arkosic material and have been evaluated for consideration as landfill liners. A lab-scale test was carried out under controlled conditions with different amended natural sandstones whereby leachate was passed through the compacted mixtures. The compacted samples consisted of siliceous sand (quartz-feldspar sand separated from the arkose sandstone) and clay (purified clay from arkose sandstone and two commercial bentonites) materials that were mixed in different proportions. The separation of mineral materials from a common and abundant natural source, for soil protection purposes, is proposed as an economic and environmentally efficient practice. The liner qualities were compared for their mineralogical, physicochemical and major ions transport and adsorption properties. Although all samples fulfilled hydraulic conductivity requirements, the addition of bentonite to arkose sandstone was determined to be an effective strategy to decrease the permeability of the soil and to improve the pollutants retention. The clay materials from arkose sandstone also contributed to pollutant retention by a significant improvement of the cation exchange capacity of the bulk material. However, the mixtures prepared with clay materials from the arkose, exhibited a slight increase of hydraulic conductivity. This effect has to be further evaluated. PMID:22285080

  9. Study of wood plastic composite in the presence of nitrogen containing additives

    NASA Astrophysics Data System (ADS)

    Ali, K. M. Idriss; Khan, Mubarak A.; Husain, M. M.

    1994-10-01

    Effect of nitrogen-containing additives in the study of wood plastic composites of MMA with simul and mango wood of Bangladesh has been investigated. Nine different additives were used and the additives containing carboamide group induce the highest tensile strength to the composite.

  10. Functional Analysis of Variance for Association Studies

    PubMed Central

    Vsevolozhskaya, Olga A.; Zaykin, Dmitri V.; Greenwood, Mark C.; Wei, Changshuai; Lu, Qing

    2014-01-01

    While progress has been made in identifying common genetic variants associated with human diseases, for most of common complex diseases, the identified genetic variants only account for a small proportion of heritability. Challenges remain in finding additional unknown genetic variants predisposing to complex diseases. With the advance in next-generation sequencing technologies, sequencing studies have become commonplace in genetic research. The ongoing exome-sequencing and whole-genome-sequencing studies generate a massive amount of sequencing variants and allow researchers to comprehensively investigate their role in human diseases. The discovery of new disease-associated variants can be enhanced by utilizing powerful and computationally efficient statistical methods. In this paper, we propose a functional analysis of variance (FANOVA) method for testing an association of sequence variants in a genomic region with a qualitative trait. The FANOVA has a number of advantages: (1) it tests for a joint effect of gene variants, including both common and rare; (2) it fully utilizes linkage disequilibrium and genetic position information; and (3) allows for either protective or risk-increasing causal variants. Through simulations, we show that FANOVA outperform two popularly used methods – SKAT and a previously proposed method based on functional linear models (FLM), – especially if a sample size of a study is small and/or sequence variants have low to moderate effects. We conduct an empirical study by applying three methods (FANOVA, SKAT and FLM) to sequencing data from Dallas Heart Study. While SKAT and FLM respectively detected ANGPTL 4 and ANGPTL 3 associated with obesity, FANOVA was able to identify both genes associated with obesity. PMID:25244256

  11. Resources allocation in healthcare for cancer: a case study using generalised additive mixed models.

    PubMed

    Musio, Monica; Sauleau, Erik A; Augustin, Nicole H

    2012-11-01

    Our aim is to develop a method for helping resources re-allocation in healthcare linked to cancer, in order to replan the allocation of providers. Ageing of the population has a considerable impact on the use of health resources because aged people require more specialised medical care due notably to cancer. We propose a method useful to monitor changes of cancer incidence in space and time taking into account two age categories, according to healthcar general organisation. We use generalised additive mixed models with a Poisson response, according to the methodology presented in Wood, Generalised additive models: an introduction with R. Chapman and Hall/CRC, 2006. Besides one-dimensional smooth functions accounting for non-linear effects of covariates, the space-time interaction can be modelled using scale invariant smoothers. Incidence data collected by a general cancer registry between 1992 and 2007 in a specific area of France is studied. Our best model exhibits a strong increase of the incidence of cancer along time and an obvious spatial pattern for people more than 70 years with a higher incidence in the central band of the region. This is a strong argument for re-allocating resources for old people cancer care in this sub-region. PMID:23242683

  12. Covalent binding of aniline to humic substances. 2. 15N NMR studies of nucleophilic addition reactions

    USGS Publications Warehouse

    Thorn, K.A.; Pettigrew, P.J.; Goldenberg, W.S.; Weber, E.J.

    1996-01-01

    Aromatic amines are known to undergo covalent binding with humic substances in the environment. Although previous studies have examined reaction conditions and proposed mechanisms, there has been no direct spectroscopic evidence for the covalent binding of the amines to the functional groups in humic substances. In order to further elucidate the reaction mechanisms, the Suwannee River and IHSS soil fulvic and humic acids were reacted with 15N-labeled aniline at pH 6 and analyzed using 15N NMR spectrometry. Aniline underwent nucleophilic addition reactions with the quinone and other carbonyl groups in the samples and became incorporated in the form of anilinohydroquinone, anilinoquinone, anilide, imine, and heterocyclic nitrogen, the latter comprising 50% or more of the bound amine. The anilide and anilinohydroquinone nitrogens were determined to be susceptible to chemical exchange by ammonia. In the case of Suwannee River fulvic acid, reaction under anoxic conditions and pretreatment with sodium borohydride or hydroxylamine prior to reaction under oxic conditions resulted in a decrease in the proportion of anilinohydroquinone nitrogen incorporated. The relative decrease in the incorporation of anilinohydroquinone nitrogen with respect to anilinoquinone nitrogen under anoxic conditions suggested that inter- or intramolecular redox reactions accompanied the nucleophilic addition reactions.

  13. Asymmetric Catalytic Enantio- and Diastereoselective Boron Conjugate Addition Reactions of α-Functionalized α,β-Unsaturated Carbonyl Substrates.

    PubMed

    Xie, Jian-Bo; Lin, Siqi; Qiao, Shuo; Li, Guigen

    2016-08-01

    An efficient catalytic system has been established for the asymmetric boron conjugate addition of B2pin2 onto α-functionalized (involving C, N, O, and Cl) α,β-unsaturated carbonyls under mild, neutral conditions involving Cu[(S)-(R)-ppfa]Cl, AgNTf2, and alcohols. The dual additives of AgNTf2 and alcohols were found to play crucial roles for achieving high catalytic activity and enantio- and diastereoselectivity (up to 98% ee and 70:1 dr). PMID:27434500

  14. Role of sulfite additives in wine induced asthma: single dose and cumulative dose studies

    PubMed Central

    Vally, H; Thompson, P

    2001-01-01

    BACKGROUND—Wine appears to be a significant trigger for asthma. Although sulfite additives have been implicated as a major cause of wine induced asthma, direct evidence is limited. Two studies were undertaken to assess sulfite reactivity in wine sensitive asthmatics. The first study assessed sensitivity to sulfites in wine using a single dose sulfited wine challenge protocol followed by a double blind, placebo controlled challenge. In the second study a cumulative dose sulfited wine challenge protocol was employed to establish if wine sensitive asthmatics as a group have an increased sensitivity to sulfites.
METHODS—In study 1, 24 asthmatic patients with a strong history of wine induced asthma were screened. Subjects showing positive responses to single blind high sulfite (300 ppm) wine challenge were rechallenged on separate days in a double blind, placebo controlled fashion with wines of varying sulfite levels to characterise their responses to these drinks. In study 2, wine sensitive asthmatic patients (n=12) and control asthmatics (n=6) were challenged cumulatively with wine containing increasing concentrations of sulfite in order to characterise further their sensitivity to sulfites in wine.
RESULTS—Four of the 24 self-reporting wine sensitive asthmatic patients were found to respond to sulfite additives in wine when challenged in a single dose fashion (study 1). In the double blind dose-response study all four had a significant fall in forced expiratory volume in one second (FEV1) (>15% from baseline) following exposure to wine containing 300 ppm sulfite, but did not respond to wines containing 20, 75 or 150 ppm sulfite. Responses were maximal at 5 minutes (mean (SD) maximal decline in FEV1 28.7 (13)%) and took 15-60 minutes to return to baseline levels. In the cumulative dose-response study (study 2) no significant difference was observed in any of the lung function parameters measured (FEV1, peak expiratory flow (PEF), mid phase forced expiratory

  15. Polymeric additives to enhance the functional properties of calcium phosphate cements

    PubMed Central

    Perez, Roman A; Kim, Hae-Won

    2012-01-01

    The vast majority of materials used in bone tissue engineering and regenerative medicine are based on calcium phosphates due to their similarity with the mineral phase of natural bone. Among them, calcium phosphate cements, which are composed of a powder and a liquid that are mixed to obtain a moldable paste, are widely used. These calcium phosphate cement pastes can be injected using minimally invasive surgery and adapt to the shape of the defect, resulting in an entangled network of calcium phosphate crystals. Adding an organic phase to the calcium phosphate cement formulation is a very powerful strategy to enhance some of the properties of these materials. Adding some water-soluble biocompatible polymers in the calcium phosphate cement liquid or powder phase improves physicochemical and mechanical properties, such as injectability, cohesion, and toughness. Moreover, adding specific polymers can enhance the biological response and the resorption rate of the material. The goal of this study is to overview the most relevant advances in this field, focusing on the different types of polymers that have been used to enhance specific calcium phosphate cement properties. PMID:22511991

  16. Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process

    NASA Astrophysics Data System (ADS)

    Shen, Chen; Pan, Zengxi; Cuiuri, Dominic; Roberts, Jon; Li, Huijun

    2016-02-01

    A functionally gradient iron-aluminum wall structure with aluminum composition gradient from 0 at. pct to over 50 at. pct is fabricated using a wire-arc additive manufacturing (WAAM) system. The as-fabricated alloy is investigated using optical microstructure analysis, hardness testing, tensile testing, X-ray diffraction phase characterization, and electron-dispersive spectrometry. The comprehensive analysis of the experimental samples has shown that the WAAM system can be used for manufacturing iron aluminide functionally graded material with full density, desired composition, and reasonable mechanical properties.

  17. An analytical approach to the problem of inverse optimization with additive objective functions: an application to human prehension

    PubMed Central

    Pesin, Yakov B.; Niu, Xun; Latash, Mark L.

    2010-01-01

    We consider the problem of what is being optimized in human actions with respect to various aspects of human movements and different motor tasks. From the mathematical point of view this problem consists of finding an unknown objective function given the values at which it reaches its minimum. This problem is called the inverse optimization problem. Until now the main approach to this problems has been the cut-and-try method, which consists of introducing an objective function and checking how it reflects the experimental data. Using this approach, different objective functions have been proposed for the same motor action. In the current paper we focus on inverse optimization problems with additive objective functions and linear constraints. Such problems are typical in human movement science. The problem of muscle (or finger) force sharing is an example. For such problems we obtain sufficient conditions for uniqueness and propose a method for determining the objective functions. To illustrate our method we analyze the problem of force sharing among the fingers in a grasping task. We estimate the objective function from the experimental data and show that it can predict the force-sharing pattern for a vast range of external forces and torques applied to the grasped object. The resulting objective function is quadratic with essentially non-zero linear terms. PMID:19902213

  18. Cobalt(III)-Catalyzed Synthesis of Indazoles and Furans by C–H Bond Functionalization/Addition/Cyclization Cascades

    PubMed Central

    2015-01-01

    The development of operationally straightforward and cost-effective routes for the assembly of heterocycles from simple inputs is important for many scientific endeavors, including pharmaceutical, agrochemical, and materials research. In this article we describe the development of a new air-stable cationic Co(III) catalyst for convergent, one-step benchtop syntheses of N-aryl-2H-indazoles and furans by C–H bond additions to aldehydes followed by in situ cyclization and aromatization. Only a substoichiometric amount of AcOH is required as an additive that is both low-cost and convenient to handle. The syntheses of these heterocycles are the first examples of Co(III)-catalyzed additions to aldehydes, and reactions are demonstrated for a variety of aromatic, heteroaromatic, and aliphatic derivatives. The syntheses of both N-aryl-2H-indazoles and furans have been performed on 20 mmol scales and should be readily applicable to larger scales. The reported heterocycle syntheses also demonstrate the use of directing groups that have not previously been applied to Co(III)-catalyzed C–H bond functionalizations. Additionally, the synthesis of furans demonstrates the first example of Co(III)-catalyzed functionalization of alkenyl C–H bonds. PMID:25494296

  19. Genetic assessment of additional endophenotypes from the Consortium on the Genetics of Schizophrenia Family Study.

    PubMed

    Greenwood, Tiffany A; Lazzeroni, Laura C; Calkins, Monica E; Freedman, Robert; Green, Michael F; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Braff, David L

    2016-01-01

    The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) has previously reported our efforts to characterize the genetic architecture of 12 primary endophenotypes for schizophrenia. We now report the characterization of 13 additional measures derived from the same endophenotype test paradigms in the COGS-1 families. Nine of the measures were found to discriminate between schizophrenia patients and controls, were significantly heritable (31 to 62%), and were sufficiently independent of previously assessed endophenotypes, demonstrating utility as additional endophenotypes. Genotyping via a custom array of 1536 SNPs from 94 candidate genes identified associations for CTNNA2, ERBB4, GRID1, GRID2, GRIK3, GRIK4, GRIN2B, NOS1AP, NRG1, and RELN across multiple endophenotypes. An experiment-wide p value of 0.003 suggested that the associations across all SNPs and endophenotypes collectively exceeded chance. Linkage analyses performed using a genome-wide SNP array further identified significant or suggestive linkage for six of the candidate endophenotypes, with several genes of interest located beneath the linkage peaks (e.g., CSMD1, DISC1, DLGAP2, GRIK2, GRIN3A, and SLC6A3). While the partial convergence of the association and linkage likely reflects differences in density of gene coverage provided by the distinct genotyping platforms, it is also likely an indication of the differential contribution of rare and common variants for some genes and methodological differences in detection ability. Still, many of the genes implicated by COGS through endophenotypes have been identified by independent studies of common, rare, and de novo variation in schizophrenia, all converging on a functional genetic network related to glutamatergic neurotransmission that warrants further investigation. PMID:26597662

  20. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  1. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  2. Genomic-scale comparison of sequence- and structure-based methods of function prediction: Does structure provide additional insight?

    PubMed Central

    Fetrow, Jacquelyn S.; Siew, Naomi; Di Gennaro, Jeannine A.; Martinez-Yamout, Maria; Dyson, H. Jane; Skolnick, Jeffrey

    2001-01-01

    A function annotation method using the sequence-to-structure-to-function paradigm is applied to the identification of all disulfide oxidoreductases in the Saccharomyces cerevisiae genome. The method identifies 27 sequences as potential disulfide oxidoreductases. All previously known thioredoxins, glutaredoxins, and disulfide isomerases are correctly identified. Three of the 27 predictions are probable false-positives. Three novel predictions, which subsequently have been experimentally validated, are presented. Two additional novel predictions suggest a disulfide oxidoreductase regulatory mechanism for two subunits (OST3 and OST6) of the yeast oligosaccharyltransferase complex. Based on homology, this prediction can be extended to a potential tumor suppressor gene, N33, in humans, whose biochemical function was not previously known. Attempts to obtain a folded, active N33 construct to test the prediction were unsuccessful. The results show that structure prediction coupled with biochemically relevant structural motifs is a powerful method for the function annotation of genome sequences and can provide more detailed, robust predictions than function prediction methods that rely on sequence comparison alone. PMID:11316881

  3. Morpholinos: studying gene function in the chick

    PubMed Central

    Norris, Anneliese; Streit, Andrea

    2014-01-01

    The use of morpholinos for perturbing gene function in the chick, Gallus gallus, has led to many important discoveries in developmental biology. This technology makes use of in vivo electroporation, which allows gain and loss of function in a temporally, and spatially controlled manner. Using this method, morpholinos can be transfected into embryonic tissues from early to late developmental stages. In this article, we describe the methods currently used in our laboratory to knock down gene function using morpholinos in vivo. We also detail how morpholinos are used to provide consistency of the results, and describe two protocols to visualise the morpholino after electroporation. In addition, we provide guidance on avoiding potential pitfalls, and suggestions for troubleshooting solutions. These revised techniques provide a practical starting point for investigating gene function in the chick. PMID:24184187

  4. Estimation of the Heat Capacities of Organic Liquids as a Function of Temperature using Group Additivity. I. Hydrocarbon Compounds

    NASA Astrophysics Data System (ADS)

    Růžička, Vlastimil; Domalski, Eugene S.

    1993-05-01

    A second-order group additivity method has been developed for the estimation of the heat capacity of liquid hydrocarbons as a function of temperature in the range from the melting temperature to the normal boiling temperature. The temperature dependence of group contributions and structural corrections has been represented by a polynomial expression. The adjustable parameters in the polynomials have been calculated using a weighted least squares minimization procedure. Recommended heat capacities from a large compilation of critically evaluated data that contains over 1300 organic liquids served as a database both for the development and testing of the method.

  5. Novel real function based method to construct heterogeneous porous scaffolds and additive manufacturing for use in medical engineering.

    PubMed

    Yang, Nan; Tian, Yanling; Zhang, Dawei

    2015-11-01

    Heterogeneous porous scaffolds have important applications in biomedical engineering, as they can mimic the structures of natural tissues to achieve the corresponding properties. Here, we introduce a new and easy to implement real function based method for constructing complex, heterogeneous porous structures, including hybrid structures, stochastic structures, functionally gradient structures, and multi-scale structures, or their combinations (e.g., hybrid multi-scale structures). Based on micro-CT data, a femur-mimetic structure with gradient morphology was constructed using our method and fabricated using stereolithography. Results showed that our method could generate gradient porosity or gradient specific surfaces and be sufficiently flexible for use with micro-CT data and additive manufacturing (AM) techniques. PMID:26320819

  6. A direct anatomical study of additional renal arteries in a Colombian mestizo population.

    PubMed

    Saldarriaga, B; Pérez, A F; Ballesteros, L E

    2008-05-01

    Traditional anatomy describes each kidney as receiving irrigation from a single renal artery. However, current literature reports great variability in renal blood supply, the number of renal arteries mentioned being the most frequently found variation. Such variation has great implications when surgery is indicated, such as in renal transplants, uroradiological procedures, renovascular hypertension, renal trauma and hydronephrosis. This article pretends to determine the frequency of additional renal arteries and their morphological expression in Colombian population in a cross-sectional study. A total of 196 of renal blocks were analysed from autopsies carried out in the Bucaramanga Institute of Forensic Medicine, Colombia; these renal blocks were processed by the injection- corrosion technique. The average age of the people being studied was 33.8 +/- 15.6 years; 85.4% of them were male and the rest female. An additional renal artery was found in 22.3% of the whole population and two additional ones were found in 2.6% of the same sample. The additional renal artery was most frequently found on the left side. The additional artery arose from the aorta's lateral aspect (52.4%); these additional arteries usually entered the renal parenchyma through the hilum. No difference was established according to gender. Nearly a third of the Colombian population presents one additional renal artery and about 3% of the same population presents two additional renal arteries. Most of them reached the kidney through its hilar region. PMID:18521812

  7. Recent Studies in Functional Analytic Psychotherapy

    ERIC Educational Resources Information Center

    Garcia, Rafael Ferro

    2008-01-01

    Functional Analytic Psychotherapy (FAP), based on the principles of radical behaviorism, emphasizes the impact of eventualities that occur during therapeutic sessions, the therapist-client interaction context, functional equivalence between environments, natural reinforcement and shaping by the therapist. This paper reviews recent studies of FAP…

  8. Response of Functional Structure of Soil Microbial Community to Multi-level Nitrogen Additions on the Central Tibetan Plateau

    NASA Astrophysics Data System (ADS)

    Zhang, G.; Yuan, Y.

    2015-12-01

    The use of fossil fuels and fertilizers has increased the amount of biologically reactive nitrogen in the atmosphere over the past century. Tibet is the one of the most threatened regions by nitrogen deposition, thus understanding how its microbial communities function maybe of high importance to predicting microbial responses to nitrogen deposition. Here we describe a short-time nitrogen addition conducted in an alpine steppe ecosystem to investigate the response of functional structure of soil microbial community to multi-level nitrogen addition. Using a GeoChip 4.0, we showed that functional diversities and richness of functional genes were unchanged at low level of nitrogen fertilizer inputs (<20 kg N ha-1 yr-1), but significantly decreased at higher nitrogen fertilizer inputs (>=40 kg N ha-1 yr-1). Detrended correspondence analysis indicated that the functional structure of microbial communities was markedly different across the nitrogen gradients. Most C degradation genes whose abundances significantly increased under elevated N fertilizer were those involved in the degradation of relatively labile C (starch, hemicellulose, cellulose), whereas the abundance of certain genes involved in the degradation of recalcitrant C (i.e. lignin) was largely decreased (such as manganese peroxidase, mnp). The results suggest that the elevated N fertilization rates might significantly accelerate the labile C degradation, but might not spur recalcitrant C degradation. The combined effect of gdh and ureC genes involved in N cycling appeared to shift the balance between ammonia and organic N toward organic N ammonification and hence increased the N mineralization potential. Moreover, Urease directly involved in urea mineralization significantly increased. Lastly, Canonical correspondence analysis showed that soil (TOC+NH4++NO3-+NO2-+pH) and plant (Aboveground plant productivity + Shannon Diversity) variables could explain 38.9% of the variation of soil microbial community

  9. Plant Functional Diversity Can Be Independent of Species Diversity: Observations Based on the Impact of 4-Yrs of Nitrogen and Phosphorus Additions in an Alpine Meadow

    PubMed Central

    Li, Wei; Cheng, Ji-Min; Yu, Kai-Liang; Epstein, Howard E.; Guo, Liang; Jing, Guang-Hua; Zhao, Jie; Du, Guo-Zhen

    2015-01-01

    Past studies have widely documented the decrease in species diversity in response to addition of nutrients, however functional diversity is often independent from species diversity. In this study, we conducted a field experiment to examine the effect of nitrogen and phosphorus fertilization ((NH4)2 HPO4) at 0, 15, 30 and 60 g m-2 yr-1 (F0, F15, F30 and F60) after 4 years of continuous fertilization on functional diversity and species diversity, and its relationship with productivity in an alpine meadow community on the Tibetan Plateau. To this purpose, three community-weighted mean trait values (specific leaf area, SLA; mature plant height, MPH; and seed size, SS) for 30 common species in each fertilization level were determined; three components of functional diversity (functional richness, FRic; functional evenness, FEve; and Rao’s index of quadratic entropy, FRao) were quantified. Our results showed that: (i) species diversity sharply decreased, but functional diversity remained stable with fertilization; (ii) community-weighted mean traits (SLA and MPH) had a significant increase along the fertilization level; (iii) aboveground biomass was not correlated with functional diversity, but it was significantly correlated with species diversity and MPH. Our results suggest that decreases in species diversity due to fertilization do not result in corresponding changes in functional diversity. Functional identity of species may be more important than functional diversity in influencing aboveground productivity in this alpine meadow community, and our results also support the mass ratio hypothesis; that is, the traits of the dominant species influenced the community biomass production. PMID:26295345

  10. New perspectives of studying gastrointestinal muscle function

    PubMed Central

    Gregersen, Hans; Liao, Donghua

    2006-01-01

    The motor function of the gastrointestinal tract has primarily been studied using manometry and radiography, though more indirect tests have also been applied. Manometry and radiography do not provide detailed information about the muscle properties as can be assessed from studies of muscle properties in muscle strips in vitro. In recent years a technique based on impedance planimetric measurement of pressure-cross-sectional area relations in a distending bag has proven to provide more detailed information about the muscle function in vivo. This review shows examples of new muscle function analysis such as length-tension diagrams, force-velocity curves and preload-afterload diagrams. PMID:16718810

  11. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Engineering and cost studies-addition of generation capacity. 1710.253 Section 1710.253 Agriculture Regulations of the Department of Agriculture (Continued... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253...

  12. Evaluating Drugs and Food Additives for Public Use: A Case Studies Approach.

    ERIC Educational Resources Information Center

    Merritt, Sheridan V.

    1980-01-01

    Described is a case study used in an introductory college biology course that provides a basis for generating debate on an issue concerning the regulation of controversial food additives and prescription drugs. The case study contained within this article deals with drug screening, specifically with information related to thalidomide. (CS)

  13. Additional Saturday rehabilitation improves functional independence and quality of life and reduces length of stay: a randomized controlled trial

    PubMed Central

    2013-01-01

    Background Many inpatients receive little or no rehabilitation on weekends. Our aim was to determine what effect providing additional Saturday rehabilitation during inpatient rehabilitation had on functional independence, quality of life and length of stay compared to 5 days per week of rehabilitation. Methods This was a multicenter, single-blind (assessors) randomized controlled trial with concealed allocation and 12-month follow-up conducted in two publically funded metropolitan inpatient rehabilitation facilities in Melbourne, Australia. Patients were eligible if they were adults (aged ≥18 years) admitted for rehabilitation for any orthopedic, neurological or other disabling conditions excluding those admitted for slow stream rehabilitation/geriatric evaluation and management. Participants were randomly allocated to usual care Monday to Friday rehabilitation (control) or to Monday to Saturday rehabilitation (intervention). The additional Saturday rehabilitation comprised physiotherapy and occupational therapy. The primary outcomes were functional independence (functional independence measure (FIM); measured on an 18 to 126 point scale), health-related quality of life (EQ-5D utility index; measured on a 0 to 1 scale, and EQ-5D visual analog scale; measured on a 0 to 100 scale), and patient length of stay. Outcome measures were assessed on admission, discharge (primary endpoint), and at 6 and 12 months post discharge. Results We randomly assigned 996 adults (mean (SD) age 74 (13) years) to Monday to Saturday rehabilitation (n = 496) or usual care Monday to Friday rehabilitation (n = 500). Relative to admission scores, intervention group participants had higher functional independence (mean difference (MD) 2.3, 95% confidence interval (CI) 0.5 to 4.1, P = 0.01) and health-related quality of life (MD 0.04, 95% CI 0.01 to 0.07, P = 0.009) on discharge and may have had a shorter length of stay by 2 days (95% CI 0 to 4, P = 0.1) when compared to

  14. Fitting additive hazards models for case-cohort studies: a multiple imputation approach.

    PubMed

    Jung, Jinhyouk; Harel, Ofer; Kang, Sangwook

    2016-07-30

    In this paper, we consider fitting semiparametric additive hazards models for case-cohort studies using a multiple imputation approach. In a case-cohort study, main exposure variables are measured only on some selected subjects, but other covariates are often available for the whole cohort. We consider this as a special case of a missing covariate by design. We propose to employ a popular incomplete data method, multiple imputation, for estimation of the regression parameters in additive hazards models. For imputation models, an imputation modeling procedure based on a rejection sampling is developed. A simple imputation modeling that can naturally be applied to a general missing-at-random situation is also considered and compared with the rejection sampling method via extensive simulation studies. In addition, a misspecification aspect in imputation modeling is investigated. The proposed procedures are illustrated using a cancer data example. Copyright © 2015 John Wiley & Sons, Ltd. PMID:26194861

  15. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  16. [TG-FTIR study on pyrolysis of wheat-straw with abundant CaO additives].

    PubMed

    Han, Long; Wang, Qin-Hui; Yang, Yu-Kun; Yu, Chun-Jiang; Fang, Meng-Xiang; Luo, Zhong-Yang

    2011-04-01

    Biomass pyrolysis in presence of abundant CaO additives is a fundamental process prior to CaO sorption enhanced gasification in biomass-based zero emission system. In the present study, thermogravimetric Fourier transform infrared (TG-FTIR) analysis was adopted to examine the effects of CaO additives on the mass loss process and volatiles evolution of wheat-straw pyrolysis. Observations from TG and FTIR analyses simultaneously demonstrated a two-stage process for CaO catalyzed wheat-straw pyrolysis, different from the single stage process for pure wheat-straw pyrolysis. CaO additives could not only absorb the released CO2 but also reduce the yields of tar species such as toluene, phenol, and formic acid in the first stage, resulting in decreased mass loss and maximum mass loss rate in this stage with an increase in CaO addition. The second stage was attributed to the CaCO3 decomposition and the mass loss and maximum mass loss rate increased with increasing amount of CaO additives. The results of the present study demonstrated the great potential of CaO additives to capture CO2 and reduce tars yields in biomass-based zero emission system. The gasification temperature in the system should be lowered down to avoid CaCO3 decomposition. PMID:21714234

  17. Catalytic functionalities of supported sulfides. I. Effect of support and additives on the CoMo catalyst

    SciTech Connect

    Muralidhar, G.; Massoth, F.E.; Shabtai, J.

    1984-01-01

    C-S hydrogenolysis (HDS) of thiophene, hydrogenation (HYD) of 1-hexene, and hydrocracking (HCG) of 2,4,4-trimethyl-1-pentene, were used as separate model test reactions to differentiate and assess the catalytic functionalities of sulfided CoMo catalysts, and their dependence on the nature of the support and incorporation of additives. Rate constants and relative catalyst activities for these three reaction types were determined. HDS and HYD activities of CoMo supported on different types of Al/sub 2/O/sub 3/ were higher, while the HCG activity was lower compared with CoMo supported on SiO/sub 2/-Al/sub 2/O/sub 3/, SiO/sub 2/-MgO, or TiO/sub 2/. For SiO/sub 2/-Al/sub 2/O/sub 3/ supports both HDS and HYD activities decreased with increase in SiO/sub 2/ content from 10 to 75%, while HCG activity showed the opposite trend. Additives to a finished CoMo catalyst at 0.5% level caused variations in HDS and HCG activities, while HYD was essentially unaffected. HDS was promoted by NH/sub 4/HF/sub 2/ and NH/sub 4/Cl, but depressed by NaNO/sub 3/, Ca(NO/sub 3/)/sub 2/, and H/sub 3/BO/sub 3/. HCG was promoted by NH/sub 4/HF/sub 2/, NH/sub 4/Cl, and H/sub 3/BO/sub 3/. Additives at 5% level, prior to or after CoMo impregnation, showed a strong depressing effect on HDS and a lesser effect on HYD, while HCG was strongly promoted by NH/sub 4/HF/sub 2/, Ti isopropoxide, and H/sub 3/BO/sub 3/. The changes in catalytic functionalities are rationalized in terms of different interactions between CoMo phase, support, and additives. 3 tables, 1 figure.

  18. SHEEP MOUNTAIN WILDERNESS STUDY AREA AND CUCAMONGA WILDERNESS AND ADDITIONS, CALIFORNIA.

    USGS Publications Warehouse

    Evans, James G.; Ridenour, James

    1984-01-01

    The Sheep Mountain Wilderness Study Area and Cucamonga Wilderness and additions encompass approximately 104 sq mi of the eastern San Gabriel Mountains, Los Angeles and San Bernardino Counties, California. A mineral survey indicates areas of probable and substantiated tungsten and gold resource potential for parts of the Sheep Mountain Wilderness Study Area and an area of probable tungsten and gold resource potential in the Cucamonga Wilderness and additions. The rugged topography, withdrawal of lands from mineral entry to protect watershed, and restricted entry of lands during periods of high fire danger have contributed to the continuing decline in mineral exploration. The geologic setting precludes the presence of energy resources.

  19. Estimation of the Heat Capacities of Organic Liquids as a Function of Temperature Using Group Additivity. An Amendment

    NASA Astrophysics Data System (ADS)

    Zábranský, Milan; Růžička, Vlastimil

    2004-12-01

    An amendment to a second-order group additivity method for the estimation of the heat capacity of pure organic liquids as a function of temperature in the range from the melting temperature to the normal boiling temperature is reported. The temperature dependence of various group contributions and structural corrections is represented by a series of second order polynomial expressions. The group contribution parameters have been developed from an extended database of more than 1800 recommended heat capacity values. The present method should be more versatile and more accurate than the previous one [Růžička and Domalski, J. Phys. Chem. Ref. Data 22, 597, 619 (1993)] due to the use of a larger database and an improved procedure for parameter calculation.

  20. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

    PubMed Central

    Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca

    2013-01-01

    Summary The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol−1 and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG ‡ and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  1. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines.

    PubMed

    Gansäuer, Andreas; Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca; Grimme, Stefan

    2013-01-01

    The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol(-1) and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG (‡) and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  2. Photoluminescence study in diaminobenzene functionalized graphene oxide

    SciTech Connect

    Gupta, Abhisek E-mail: cnssks@iacs.res.in; Saha, Shyamal K. E-mail: cnssks@iacs.res.in

    2014-10-15

    Being an excellent electronic material graphene is a very poor candidate for optoelectronic applications. One of the major strategies to develop the optical property in GO is the functionalization of graphene oxide (GO). In the present work GO sheets are functionalized by o-phenylenediamine to achieve diaminobenzene functionalized GO composite (DAB-GO). Formation of DAB-GO composite is further characterized by FTIR, UV, Raman studies. Excellent photoluminescence is observed in DAB-GO composite via passivation of the surface reactive sites by ring-opening amination of epoxides of GO.

  3. Density functional theory studies of etoricoxib

    NASA Astrophysics Data System (ADS)

    Sachdeva, Ritika; Kaur, Prabhjot; Singh, V. P.; Saini, G. S. S.

    2016-05-01

    Etoricoxib is a COX-2 selective inhibitor drug with molecular formula C18H15ClN2O2S. It is primarily used for the treatment of arthritis(rheumatoid, psoriatic, osteoarthritis), ankylosing spondylitis, gout and chronic low back pain. Theoretical studies of the molecule including geometry optimization and vibrational frequency calculations were carried out with the help of density functional theory calculations using 6-311++ g (d, p) basis set and B3LYP functional.

  4. Sulphur diffusion in β-NiAl and effect of Pt additive: an ab initio study

    NASA Astrophysics Data System (ADS)

    Chen, Kuiying

    2016-02-01

    Diffusivities of detrimental impurity sulfur (S) in stoichiometric and Pt doped β-NiAl were evaluated using density functional theory calculations. The apparent activation energy and the pre-exponential factor of diffusivity via the next nearest neighbour (NNN) and interstitial jumps were evaluated to identify possible preferred diffusion mechanism(s). By calculating the electron localization function (ELF), the bonding characteristics of S with its surrounding atoms were assessed for the diffusion process. By comparison with the experimental results, the S diffusion through the NNN vacancy-mediated mechanism is found to be favoured. Addition of Pt in β-NiAl was found to significantly reduce the S diffusivity, and an associated electronic effect was explored. The elucidation of the above mechanisms may shed light on the development of new Pt-modified doped β-NiAl bond coats that can extend the life of oxidation resistant and thermal barrier coatings.

  5. Resonance scattering and radiation force calculations for an elastic cylinder using the translational addition theorem for cylindrical wave functions

    SciTech Connect

    Mitri, F. G.

    2015-09-15

    The standard Resonance Scattering Theory (RST) of plane waves is extended for the case of any two-dimensional (2D) arbitrarily-shaped monochromatic beam incident upon an elastic cylinder with arbitrary location using an exact methodology based on Graf’s translational addition theorem for the cylindrical wave functions. The analysis is exact as it does not require numerical integration procedures. The formulation is valid for any cylinder of finite size and material that is immersed in a nonviscous fluid. Partial-wave series expansions (PWSEs) for the incident, internal and scattered linear pressure fields are derived, and the analysis is further extended to obtain generalized expressions for the on-axis and off-axis acoustic radiation force components. The wave-fields are expressed using generalized PWSEs involving the beam-shape coefficients (BSCs) and the scattering coefficients of the cylinder. The off-axial BSCs are expressed analytically in terms of an infinite PWSE with emphasis on the translational offset distance d. Numerical computations are considered for a zeroth-order quasi-Gaussian beam chosen as an example to illustrate the analysis. Acoustic resonance scattering directivity diagrams are calculated by subtracting an appropriate background from the expression of the scattered pressure field. In addition, computations for the radiation force exerted on an elastic cylinder centered on the axis of wave propagation of the beam, and shifted off-axially are analyzed and discussed.

  6. Improved synthesis of a highly fluorinated boronic ester as dual functional additive for lithium-ion batteries.

    SciTech Connect

    Weng, W.; Zhang, Z.; Schlueter, J. A.; Redfern, P. C.; Curtiss, L. A.; Amine, K.

    2011-02-01

    The electrolyte additive 2-(pentafluorophenyl)-tetrafluoro-1,3,2-benzodioxaborole (PFPTFBB, 1) was found to have a reversible redox potential at 4.43 V vs. Li{sup +}/Li. This compound can function as an overcharge protection additive as well as anion receptor for lithium-ion batteries. It has drawn a great deal of interest from industry, but its use in relatively large quantities is limited by the production challenges of tetrafluorocatechol (TFC, 3), which is the key starting chemical for the synthesis of PFPTFBB. As part of a continuous effort in our research toward improving the safety of lithium-ion batteries, we have performed the synthesis of TFC and optimized its synthesis process. The X-ray single-crystal structures of TFC and the intermediate product 5,6,7,8-tetrafluoro-1,4-benzodioxane (4) during the process of PFPTFBB synthesis are reported for the first time. Also presented is the lithium ion cell performance of PFPTFBB as redox shuttle in various electrolyte systems.

  7. A study on the effect of halloysite nanoparticle addition on the strength of glass fiber reinforced plastic

    NASA Astrophysics Data System (ADS)

    Kim, Yun-Hae; Park, Soo-Jeong; Lee, Jin-Woo; Moon, Kyung-Man

    2015-03-01

    Halloysite nanotube, which has been used in the polymer, has been spotlighted as a useful functional materials in the improvement of mechanical properties. In the current study, we established the optimal nanoparticle dispersion and analyzed the mechanical characteristics and the behavior of composites reinforced by HNTs have been synthesized by dispersing HNTs to the unsaturated polyester resin (UPR) and their mechanical characteristics, especially the tensile strength, interlaminar shear strength have been analyzed. Additionally, the reinforcement effect and its variation according to the amount of HNTs was also studied.

  8. Generating Scenarios of Addition and Subtraction: A Study of Japanese University Students

    ERIC Educational Resources Information Center

    Kinda, Shigehiro

    2013-01-01

    Students are presented with problems involving three scenario types of addition and subtraction in elementary mathematics: one dynamic ("Change") and two static ("Combine, Compare"). Previous studies have indicated that the dynamic type is easier for school children, whereas the static types are more difficult and comprehended only gradually…

  9. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Engineering and cost studies-addition of generation capacity. 1710.253 Section 1710.253 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND...

  10. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Engineering and cost studies-addition of generation capacity. 1710.253 Section 1710.253 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GENERAL AND PRE-LOAN POLICIES AND PROCEDURES COMMON TO ELECTRIC LOANS AND...

  11. Experimental study of combustion of decane, dodecane and hexadecane with polymeric and nano-particle additives

    NASA Astrophysics Data System (ADS)

    Ghamari, Mohsen; Ratner, Albert

    2015-11-01

    Recent studies have shown that adding combustible nano-particles could have promising effects on increasing burning rate of liquid fuels. Combustible nano-particles could enhance the heat conduction and mixing within the droplet. Polymers have also higher burning rate than regular hydrocarbon fuels because of having the flame closer to the droplet surface. Therefore adding polymeric additive could have the potential to increase the burning rate. In this study, combustion of stationary fuel droplets of n-Decane, n-Dodecane and n-Hexadecane doped with different percentages of a long chain polymer and also a very fine nano carbon was examined and compared with the pure hydrocarbon behavior. In contrast with hydrocarbon droplets with no polymer addition, several zones of combustion including a slow and steady burning zone, a strong swelling zone and a final fast and fairly steady combustion zone were also detected. In addition, increasing polymer percentage resulted in a more extended swelling zone and shorter slow burning zone in addition to a shorter total burning time. Addition of nano-particles also resulted in an overall increased burning rate and shortened burning time which is due to enhanced heat conduction within the droplet.

  12. Anatomically ordered tapping interferes more with one-digit addition than two-digit addition: a dual-task fMRI study.

    PubMed

    Soylu, Firat; Newman, Sharlene D

    2016-02-01

    Fingers are used as canonical representations for numbers across cultures. In previous imaging studies, it was shown that arithmetic processing activates neural resources that are known to participate in finger movements. Additionally, in one dual-task study, it was shown that anatomically ordered finger tapping disrupts addition and subtraction more than multiplication, possibly due to a long-lasting effect of early finger counting experiences on the neural correlates and organization of addition and subtraction processes. How arithmetic task difficulty and tapping complexity affect the concurrent performance is still unclear. If early finger counting experiences have bearing on the neural correlates of arithmetic in adults, then one would expect anatomically and non-anatomically ordered tapping to have different interference effects, given that finger counting is usually anatomically ordered. To unravel these issues, we studied how (1) arithmetic task difficulty and (2) the complexity of the finger tapping sequence (anatomical vs. non-anatomical ordering) affect concurrent performance and use of key neural circuits using a mixed block/event-related dual-task fMRI design with adult participants. The results suggest that complexity of the tapping sequence modulates interference on addition, and that one-digit addition (fact retrieval), compared to two-digit addition (calculation), is more affected from anatomically ordered tapping. The region-of-interest analysis showed higher left angular gyrus BOLD response for one-digit compared to two-digit addition, and in no-tapping conditions than dual tapping conditions. The results support a specific association between addition fact retrieval and anatomically ordered finger movements in adults, possibly due to finger counting strategies that deploy anatomically ordered finger movements early in the development. PMID:26410214

  13. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    NASA Astrophysics Data System (ADS)

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.

  14. Microstructural Study Of Zinc Hot Dip Galvanized Coatings with Titanium Additions In The Zinc Melt

    NASA Astrophysics Data System (ADS)

    Konidaris, S.; Pistofidis, N.; Vourlias, G.; Pavlidou, E.; Stergiou, A.; Stergioudis, G.; Polychroniadis, E. K.

    2007-04-01

    Zinc hot-dip galvanizing is a method for protecting iron and steel against corrosion. Galvanizing with pure Zn or Zn with additions like Ni, Al, Pb and Bi has been extensively studied, but there is a lack of scientific information about other additions. The present work examines the effect of a 0.5 wt% Ti addition in the Zn melt. The samples were exposed to accelerated corrosion in a salt spray chamber (SSC). The microstructure and chemical composition of the coatings were determined by Optical Microscopy, XRD and SEM associated with an EDS Analyzer. The results indicate that the coatings have a typical morphology, while Zn-Ti phases were also detected.

  15. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    PubMed Central

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-01-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

  16. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    SciTech Connect

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.

  17. Impact of Additional Transthoracic Electrical Cardioversion on Cardiac Function and Atrial Fibrillation Recurrence in Patients with Persistent Atrial Fibrillation Who Underwent Radiofrequency Catheter Ablation

    PubMed Central

    Wang, Deguo; Zhang, Fengxiang; Wang, Ancai

    2016-01-01

    Backgrounds and Objective. During the procession of radiofrequency catheter ablation (RFCA) in persistent atrial fibrillation (AF), transthoracic electrical cardioversion (ECV) is required to terminate AF. The purpose of this study was to determine the impact of additional ECV on cardiac function and recurrence of AF. Methods and Results. Persistent AF patients received extensive encircling pulmonary vein isolation (PVI) and additional line ablation. Patients were divided into two groups based on whether they need transthoracic electrical cardioversion to terminate AF: electrical cardioversion (ECV group) and nonelectrical cardioversion (NECV group). Among 111 subjects, 35 patients were returned to sinus rhythm after ablation by ECV (ECV group) and 76 patients had AF termination after the ablation processions (NECV group). During the 12-month follow-ups, the recurrence ratio of patients was comparable in ECV group (15/35) and NECV group (34/76) (44.14% versus 44.74%, P = 0.853). Although left atrial diameters (LAD) decreased significantly in both groups, there were no significant differences in LAD and left ventricular cardiac function between ECV group and NECV group. Conclusions. This study revealed that ECV has no significant impact on the maintenance of SR and the recovery of cardiac function. Therefore, ECV could be applied safely to recover SR during the procedure of catheter ablation of persistent atrial fibrillation. PMID:27022500

  18. Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

    SciTech Connect

    Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

    2010-12-29

    This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release with unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway

  19. a Study on the Role of Sintering Additives for Fabrication of sic Ceramic

    NASA Astrophysics Data System (ADS)

    Yoon, Han Ki; Lee, Young Ju; Cho, Ho Jun; Kim, Tae Gyu

    Silicon carbide (SiC) materials have been extensively studied for high temperature components in advanced energy system and advanced gas turbine. The SiC ceramics have been fabricated by a NITE (Nano Infiltration Transient Eutectic Phase) Process, using Nano-SiC powder. The sintering additives used for forming liquid phase under sintering process, used the sintering additives ratios were an Al2O3-Y2O3 system or add SiO2 contents. A major R&D focus for the SiC ceramics is the production to obtain high purity SiC ceramics. In this study, we investigated roles of the sintering additives(Al2O3:Y2O3) to fabrication of the SiC ceramics. The effects of SiO2 contents and density properties of the SiC ceramics were also investigated. To investigate the effects of SiO2, Al2O3/Y2O3 composition were fixed and then SiO2 ratios were changed as several kinds, and to confirm the effects of sintering additives ratios (Al2O3:Y2O3) they were changed between 4:6 and 6:4 in x wt.%.

  20. G1/ELE Functions in the Development of Rice Lemmas in Addition to Determining Identities of Empty Glumes

    PubMed Central

    Liu, Mengjia; Li, Haifeng; Su, Yali; Li, Wenqiang; Shi, Chunhai

    2016-01-01

    Rice empty glumes, also named sterile lemmas or rudimentary lemmas according to different interpretations, are distinct from lemmas in morphology and cellular pattern. Consistently, the molecular mechanism to control the development of lemmas is different from that of empty glumes. Rice LEAFY HULL STERILE1(OsLHS1) and DROOPING LEAF(DL) regulate the cellular pattern and the number of vascular bundles of lemmas respectively, while LONG STERILE LEMMA1 (G1)/ELONGATED EMPTY GLUME (ELE) and PANICLE PHYTOMER2 (PAP2)/OsMADS34 determine identities of empty glumes. Though some progress has been made, identities of empty glumes remain unclear, and genetic interactions between lemma genes and glume genes have been rarely elucidated. In this research, a new G1/ELE mutant g1–6 was identified and the phenotype was analyzed. Similar to previously reported mutant lines of G1/ELE, empty glumes of g1–6 plants transform into lemma-like organs. Furthermore, Phenotypes of single and double mutant plants suggest that, in addition to their previously described gene-specific functions, G1/ELE and OsLHS1 play redundant roles in controlling vascular bundle number, cell volume, and cell layer number of empty glumes and lemmas. Meanwhile, expression patterns of G1/ELE in osmads1-z flowers and OsLHS1 in g1–6 flowers indicate they do not regulate each other at the level of transcription. Finally, down-regulation of the empty glume gene OsMADS34/PAP2 and ectopic expression of the lemma gene DL, in the g1–6 plants provide further evidence that empty glumes are sterile lemmas. Generally, our findings provided valuable information for better understanding functions of G1 and OsLHS1 in flower development and identities of empty glumes. PMID:27462334

  1. Additive loss-of-function proteasome subunit mutations in CANDLE/PRAAS patients promote type I IFN production.

    PubMed

    Brehm, Anja; Liu, Yin; Sheikh, Afzal; Marrero, Bernadette; Omoyinmi, Ebun; Zhou, Qing; Montealegre, Gina; Biancotto, Angelique; Reinhardt, Adam; Almeida de Jesus, Adriana; Pelletier, Martin; Tsai, Wanxia L; Remmers, Elaine F; Kardava, Lela; Hill, Suvimol; Kim, Hanna; Lachmann, Helen J; Megarbane, Andre; Chae, Jae Jin; Brady, Jilian; Castillo, Rhina D; Brown, Diane; Casano, Angel Vera; Gao, Ling; Chapelle, Dawn; Huang, Yan; Stone, Deborah; Chen, Yongqing; Sotzny, Franziska; Lee, Chyi-Chia Richard; Kastner, Daniel L; Torrelo, Antonio; Zlotogorski, Abraham; Moir, Susan; Gadina, Massimo; McCoy, Phil; Wesley, Robert; Rother, Kristina I; Rother, Kristina; Hildebrand, Peter W; Brogan, Paul; Krüger, Elke; Aksentijevich, Ivona; Goldbach-Mansky, Raphaela

    2015-11-01

    Autosomal recessive mutations in proteasome subunit β 8 (PSMB8), which encodes the inducible proteasome subunit β5i, cause the immune-dysregulatory disease chronic atypical neutrophilic dermatosis with lipodystrophy and elevated temperature (CANDLE), which is classified as a proteasome-associated autoinflammatory syndrome (PRAAS). Here, we identified 8 mutations in 4 proteasome genes, PSMA3 (encodes α7), PSMB4 (encodes β7), PSMB9 (encodes β1i), and proteasome maturation protein (POMP), that have not been previously associated with disease and 1 mutation in PSMB8 that has not been previously reported. One patient was compound heterozygous for PSMB4 mutations, 6 patients from 4 families were heterozygous for a missense mutation in 1 inducible proteasome subunit and a mutation in a constitutive proteasome subunit, and 1 patient was heterozygous for a POMP mutation, thus establishing a digenic and autosomal dominant inheritance pattern of PRAAS. Function evaluation revealed that these mutations variably affect transcription, protein expression, protein folding, proteasome assembly, and, ultimately, proteasome activity. Moreover, defects in proteasome formation and function were recapitulated by siRNA-mediated knockdown of the respective subunits in primary fibroblasts from healthy individuals. Patient-isolated hematopoietic and nonhematopoietic cells exhibited a strong IFN gene-expression signature, irrespective of genotype. Additionally, chemical proteasome inhibition or progressive depletion of proteasome subunit gene transcription with siRNA induced transcription of type I IFN genes in healthy control cells. Our results provide further insight into CANDLE genetics and link global proteasome dysfunction to increased type I IFN production. PMID:26524591

  2. Additive loss-of-function proteasome subunit mutations in CANDLE/PRAAS patients promote type I IFN production

    PubMed Central

    Brehm, Anja; Liu, Yin; Sheikh, Afzal; Marrero, Bernadette; Omoyinmi, Ebun; Zhou, Qing; Montealegre, Gina; Biancotto, Angelique; Reinhardt, Adam; Almeida de Jesus, Adriana; Pelletier, Martin; Tsai, Wanxia L.; Remmers, Elaine F.; Kardava, Lela; Hill, Suvimol; Kim, Hanna; Lachmann, Helen J.; Megarbane, Andre; Chae, Jae Jin; Brady, Jilian; Castillo, Rhina D.; Brown, Diane; Casano, Angel Vera; Gao, Ling; Chapelle, Dawn; Huang, Yan; Stone, Deborah; Chen, Yongqing; Sotzny, Franziska; Lee, Chyi-Chia Richard; Kastner, Daniel L.; Torrelo, Antonio; Zlotogorski, Abraham; Moir, Susan; Gadina, Massimo; McCoy, Phil; Wesley, Robert; Rother, Kristina; Hildebrand, Peter W.; Brogan, Paul; Krüger, Elke; Aksentijevich, Ivona; Goldbach-Mansky, Raphaela

    2015-01-01

    Autosomal recessive mutations in proteasome subunit β 8 (PSMB8), which encodes the inducible proteasome subunit β5i, cause the immune-dysregulatory disease chronic atypical neutrophilic dermatosis with lipodystrophy and elevated temperature (CANDLE), which is classified as a proteasome-associated autoinflammatory syndrome (PRAAS). Here, we identified 8 mutations in 4 proteasome genes, PSMA3 (encodes α7), PSMB4 (encodes β7), PSMB9 (encodes β1i), and proteasome maturation protein (POMP), that have not been previously associated with disease and 1 mutation in PSMB8 that has not been previously reported. One patient was compound heterozygous for PSMB4 mutations, 6 patients from 4 families were heterozygous for a missense mutation in 1 inducible proteasome subunit and a mutation in a constitutive proteasome subunit, and 1 patient was heterozygous for a POMP mutation, thus establishing a digenic and autosomal dominant inheritance pattern of PRAAS. Function evaluation revealed that these mutations variably affect transcription, protein expression, protein folding, proteasome assembly, and, ultimately, proteasome activity. Moreover, defects in proteasome formation and function were recapitulated by siRNA-mediated knockdown of the respective subunits in primary fibroblasts from healthy individuals. Patient-isolated hematopoietic and nonhematopoietic cells exhibited a strong IFN gene-expression signature, irrespective of genotype. Additionally, chemical proteasome inhibition or progressive depletion of proteasome subunit gene transcription with siRNA induced transcription of type I IFN genes in healthy control cells. Our results provide further insight into CANDLE genetics and link global proteasome dysfunction to increased type I IFN production. PMID:26524591

  3. G1/ELE Functions in the Development of Rice Lemmas in Addition to Determining Identities of Empty Glumes.

    PubMed

    Liu, Mengjia; Li, Haifeng; Su, Yali; Li, Wenqiang; Shi, Chunhai

    2016-01-01

    Rice empty glumes, also named sterile lemmas or rudimentary lemmas according to different interpretations, are distinct from lemmas in morphology and cellular pattern. Consistently, the molecular mechanism to control the development of lemmas is different from that of empty glumes. Rice LEAFY HULL STERILE1(OsLHS1) and DROOPING LEAF(DL) regulate the cellular pattern and the number of vascular bundles of lemmas respectively, while LONG STERILE LEMMA1 (G1)/ELONGATED EMPTY GLUME (ELE) and PANICLE PHYTOMER2 (PAP2)/OsMADS34 determine identities of empty glumes. Though some progress has been made, identities of empty glumes remain unclear, and genetic interactions between lemma genes and glume genes have been rarely elucidated. In this research, a new G1/ELE mutant g1-6 was identified and the phenotype was analyzed. Similar to previously reported mutant lines of G1/ELE, empty glumes of g1-6 plants transform into lemma-like organs. Furthermore, Phenotypes of single and double mutant plants suggest that, in addition to their previously described gene-specific functions, G1/ELE and OsLHS1 play redundant roles in controlling vascular bundle number, cell volume, and cell layer number of empty glumes and lemmas. Meanwhile, expression patterns of G1/ELE in osmads1-z flowers and OsLHS1 in g1-6 flowers indicate they do not regulate each other at the level of transcription. Finally, down-regulation of the empty glume gene OsMADS34/PAP2 and ectopic expression of the lemma gene DL, in the g1-6 plants provide further evidence that empty glumes are sterile lemmas. Generally, our findings provided valuable information for better understanding functions of G1 and OsLHS1 in flower development and identities of empty glumes. PMID:27462334

  4. Using epidemiology to regulate food additives: saccharin case-control studies.

    PubMed

    Cordle, F; Miller, S A

    1984-01-01

    The increasing use of nonnutritive sweeteners and the widely publicized 1969 ban on cyclamate led to additional investigations in rodents of the carcinogenic potential of saccharin. Preliminary results of a long-term feeding study indicated formation of bladder tumors in rodents, and collective experimental evidence has demonstrated that high doses of the synthetic sweetener saccharin can cause bladder cancer in rodents. Based on the results of that and other rodent studies indicating an increased risk of bladder cancer associated with saccharin, the Commissioner of the Food and Drug Administration announced the agency's intention to propose a ban on saccharin. This intention was made known in April 1977 under the Delaney Clause of the Food, Drug, and Cosmetic Act. The clause essentially states that no additive shall be deemed safe if it is found to induce cancer in man or animals, or if it is found, after tests appropriate for the evaluation of the safety of food additives, to induce cancer in man or animals. Also in 1977, a group of epidemiologists began to assess the available epidemiologic information to determine the potential human risk. This report describes the assessment of several human epidemiologic studies available then and the results of more recent epidemiologic studies. PMID:6431484

  5. Study of asphalt/asphaltene precipitation during addition of solvents to West Sak crude

    SciTech Connect

    Jiang, J.C.; Patil, S.L.; Kamath, V.A. )

    1990-07-01

    In this study, experimental data on the amount of asphalt and asphaltene precipitation due to addition of solvents to West Sak crude were gathered. The first set of tests were conducted for two types of West Sak stock tank oils. Solvents used include: ethane, carbon dioxide, propane, n-butane, n-pentane, n-heptane, Prudhoe Bay natural gas (PBG) and natural gas liquids (NGL). Effect of solvent to oil dilution ratio on the amount of precipitation was studied. Alteration of crude oil composition due to asphalt precipitation was measured using gas-liquid chromatography. A second set of experiments were conducted to measure asphaltene precipitation due to addition of CO{sub 2} to live (recombined) West Sak crude.

  6. Pulmonary functions in tannery workers--a cross sectional study.

    PubMed

    Chandrasekaran, Vasanthi; Dilara, K; Padmavathi, R

    2014-01-01

    Tannery workers are at potential exposure to detrimental agents rendering them vulnerable to respiratory and dermal problems. Thus by performing pulmonary functions among leather tannery workers, we can decipher the effect of chromium and leather dust on lung functions and also the decline of respiratory functions with increasing years of exposure to leather dust. Pulmonary functions were assessed for 130 tannery workers and compared with the 130 unexposed office workers. Pulmonary function measurements namely FVC, FEV1, FEF25-75% and PEFR were measured using portable data logging Spirometer (KOKO Spirometer). The observed pulmonary functions of Tannery-workers in this study showed a reduction in FEV1, FVC, FEV1/FVC ratio, FEF25-75 and PEFR in relation to their predicted values and also compared to the unexposed. Smokers showed a decline in pulmonary functions compared to the non smokers because smoking acts as an additional risk factor in the development of respiratory illnesses. It is worthy to mention that the pulmonary function values correlate negatively with the duration of exposure to leather dust. So this study could provide base line information based upon which legal implementation of preventive measures could be undertaken. PMID:25906602

  7. Suitability of the microbial community composition and function in a semiarid mine soil for assessing phytomanagement practices based on mycorrhizal inoculation and amendment addition.

    PubMed

    Kohler, J; Caravaca, F; Azcón, R; Díaz, G; Roldán, A

    2016-03-15

    The recovery of species composition and functions of soil microbial community of degraded lands is crucial in order to guarantee the long-term self-sustainability of the ecosystems. A field experiment was carried out to test the influence of combining fermented sugar beet residue (SBR) addition and inoculation with the arbuscular mycorrhizal (AM) fungus Funneliformis mosseae on the plant growth parameters and microbial community composition and function in the rhizosphere of two autochthonous plant species (Dorycnium pentaphyllum L. and Asteriscus maritimus L.) growing in a semiarid soil contaminated by heavy metals. We analysed the phospholipid fatty acids (PLFAs), neutral lipids fatty acids (NLFAs) and enzyme activities to study the soil microbial community composition and function, respectively. The combined treatment was not effective for increasing plant growth. The SBR promoted the growth of both plant species, whilst the AM fungus was effective only for D. pentaphyllum. The effect of the treatments on plant growth was linked to shifts in the rhizosphere microbial community composition and function. The highest increase in dehydrogenase and β-glucosidase activities was recorded in SBR-amended soil. The SBR increased the abundance of marker PLFAs for saprophytic fungi, Gram+ and Gram- bacteria and actinobacteria, whereas the AM fungus enhanced the abundance of AM fungi-related NLFA and marker PLFAs for Gram- bacteria. Measurement of the soil microbial community composition and function was useful to assess the success of phytomanagement technologies in a semiarid, contaminated soil. PMID:26773427

  8. Phylogenetic Analyses and Characterization of RNase X25 from Drosophila melanogaster Suggest a Conserved Housekeeping Role and Additional Functions for RNase T2 Enzymes in Protostomes

    PubMed Central

    Ambrosio, Linda; Bailey, Ryan; Ding, Jian; MacIntosh, Gustavo C.

    2014-01-01

    Ribonucleases belonging to the RNase T2 family are enzymes associated with the secretory pathway that are almost absolutely conserved in all eukaryotes. Studies in plants and vertebrates suggest they have an important housekeeping function in rRNA recycling. However, little is known about this family of enzymes in protostomes. We characterized RNase X25, the only RNase T2 enzyme in Drosophila melanogaster. We found that RNase X25 is the major contributor of ribonuclease activity in flies as detected by in gel assays, and has an acidic pH preference. Gene expression analyses showed that the RNase X25 transcript is present in all adult tissues and developmental stages. RNase X25 expression is elevated in response to nutritional stresses; consistent with the hypothesis that this enzyme has a housekeeping role in recycling RNA. A correlation between induction of RNase X25 expression and autophagy was observed. Moreover, induction of gene expression was triggered by oxidative stress suggesting that RNase X25 may have additional roles in stress responses. Phylogenetic analyses of this family in protostomes showed that RNase T2 genes have undergone duplication events followed by divergence in several phyla, including the loss of catalytic residues, and suggest that RNase T2 proteins have acquired novel functions. Among those, it is likely that a role in host immunosuppression evolved independently in several groups, including parasitic Platyhelminthes and parasitoid wasps. The presence of only one RNase T2 gene in the D. melanogaster genome, without any other evident secretory RNase activity detected, makes this organism an ideal system to study the cellular functions of RNase T2 proteins associated with RNA recycling and maintenance of cellular homeostasis. On the other hand, the discovery of gene duplications in several protostome genomes also presents interesting new avenues to study additional biological functions of this ancient family of proteins. PMID:25133712

  9. A Study of Aluminum Combustion in Solids, Powders, Foams, Additively-Manufactured Lattices, and Composites

    NASA Astrophysics Data System (ADS)

    Black, James; Trammell, Norman; Batteh, Jad; Curran, Nicholas; Rogers, John; Littrell, Donald

    2015-06-01

    This study examines the fireball characteristics, blast parameters, and combustion efficiency of explosively-shocked aluminum-based materials. The materials included structural and non-structural aluminum forms - such as solid cylinders, foams, additively-manufactured lattices, and powders - and some polytetrafluoroethylene-aluminum (PTFE-Al) composites. The materials were explosively dispersed in a small blast chamber, and the blast properties and products were measured with pressure transducers, thermocouples, slow and fast ultraviolet/visible spectrometers, and high-speed video.

  10. Functional mammalian spliceosomal complex E contains SMN complex proteins in addition to U1 and U2 snRNPs

    PubMed Central

    Makarov, Evgeny M.; Owen, Nicholas; Bottrill, Andrew; Makarova, Olga V.

    2012-01-01

    Spliceosomes remove introns from primary gene transcripts. They assemble de novo on each intron through a series of steps that involve the incorporation of five snRNP particles and multiple non-snRNP proteins. In mammals, all the intermediate complexes have been characterized on one transcript (MINX), with the exception of the very first, complex E. We have purified this complex by two independent procedures using antibodies to either U1-A or PRPF40A proteins, which are known to associate at an early stage of assembly. We demonstrate that the purified complexes are functional in splicing using commitment assays. These complexes contain components expected to be in the E complex and a number of previously unrecognized factors, including survival of motor neurons (SMN) and proteins of the SMN-associated complex. Depletion of the SMN complex proteins from nuclear extracts inhibits formation of the E complex and causes non-productive complexes to accumulate. This suggests that the SMN complex stabilizes the association of U1 and U2 snRNPs with pre-mRNA. In addition, the antibody to PRPF40A precipitated U2 snRNPs from nuclear extracts, indicating that PRPF40A associates with U2 snRNPs. PMID:22110043

  11. Microscale functional cytomics for studying hematologic cancers

    PubMed Central

    Young, Edmond W. K.; Pak, Chorom; Kahl, Brad S.; Yang, David T.; Callander, Natalie S.; Miyamoto, Shigeki

    2012-01-01

    An important problem in translational cancer research is our limited ability to functionally characterize behaviors of primary patient cancer cells and associated stromal cell types, and relate mechanistic understanding to therapy selection. Functional analyses of primary samples face at least 3 major challenges: limited availability of primary samples for testing, paucity of functional information extracted from samples, and lack of functional methods accessible to many researchers. We developed a microscale cell culture platform that overcomes these limitations, especially for hematologic cancers. A key feature of the platform is the ability to compartmentalize small populations of adherent and nonadherent cells in controlled microenvironments that can better reflect physiological conditions and enable cell-cell interaction studies. Custom image analysis was developed to measure cell viability and protein subcellular localizations in single cells to provide insights into heterogeneity of cellular responses. We validated our platform by assessing viability and nuclear translocations of NF-κB and STAT3 in multiple myeloma cells exposed to different conditions, including cocultured bone marrow stromal cells. We further assessed its utility by analyzing NF-κB activation in a primary chronic lymphocytic leukemia patient sample. Our platform can be applied to myriad biological questions, enabling high-content functional cytomics of primary hematologic malignancies. PMID:22262772

  12. Mineral resources of the Buffalo Hump and Sand Dunes Addition Wilderness Study Areas, Sweetwater County, Wyoming

    SciTech Connect

    Gibbons, A.B.; Barbon, H.N.; Kulik, D.M. ); McDonnell, J.R. Jr. )

    1990-01-01

    The authors present a study to assess the potential for undiscovered mineral resources and appraise the identified resources of the Buffalo Hump and Sand Dunes Addition Wilderness Study Areas, southwestern Wyoming, There are no mines, prospects, or mineralized areas nor any producing oil or gas wells; however, there are occurrences of coal, claystone and shale, and sand. There is a moderate resource potential for oil shale and natural gas and a low resource potential for oil, for metals, including uranium, and for geothermal sources.

  13. Serum Basal Paraoxonase 1 Activity as an Additional Liver Function Test for the Evaluation of Patients with Chronic Hepatitis

    PubMed Central

    Halappa, Chandrakanth K; Pyati, Sudharani A; Nagaraj; Wali, Vinod

    2015-01-01

    Background The diagnostic accuracy of currently available standard panel of liver function tests is not satisfactory for the reliable diagnosis of chronic liver disorders. Earlier studies have reported that serum basal paraoxonase 1 (PON1) activity measurement may add a significant contribution to the liver function tests. Aim To assess whether the measurement of serum basal paraoxonase 1 (PON1) activity would be useful as an index of liver function status in chronic hepatitis patients. Materials and Methods The study included 50 chronic hepatitis patients and 50 apparently healthy controls based on inclusion & exclusion criteria. In all the subjects, standard liver function tests were analysed by using standard methods. Basal PON1 activity was estimated using spectrophotometric method by the hydrolysis of p-nitrophenylacetate. Student t-test, Pearson’s correlation coefficient, diagnostic validity tests and ROC curve analysis were the methods used for the statistical analysis of the data. Results The serum basal PON1 activity was significantly decreased in chronic hepatitis cases when compared to controls (p< 0.001). Also basal PON1 activity was positively correlated with serum total protein and albumin, and negatively correlated with serum total bilirubin, alanine amino transferase (ALT), and alkaline phosphatase (ALP) (p< 0.001) in chronic hepatitis cases but not in healthy controls. Diagnostic validity tests showed, basal PON1 activity was a better discriminator of chronic hepatitis than total protein, albumin and ALP with sensitivity of 68%, specificity of 100%, positive predictive value of 100% and negative predictive value of 75%. ROC curve analysis demonstrated highest diagnostic accuracy for ALT (AUC = 0.999) followed by PON1 (AUC = 0.990), total bilirubin (AUC = 0.977), ALP (AUC = 0.904), total protein (AUC = 0.790) and albumin (AUC = 0.595). Conclusion Diagnostic accuracy of serum PON1 activity is better than total bilirubin, total protein, albumin and

  14. Plant functional traits mediate reproductive phenology and success in response to experimental warming and snow addition in Tibet.

    PubMed

    Dorji, Tsechoe; Totland, Orjan; Moe, Stein R; Hopping, Kelly A; Pan, Jianbin; Klein, Julia A

    2013-02-01

    Global climate change is predicted to have large impacts on the phenology and reproduction of alpine plants, which will have important implications for plant demography and community interactions, trophic dynamics, ecosystem energy balance, and human livelihoods. In this article we report results of a 3-year, fully factorial experimental study exploring how warming, snow addition, and their combination affect reproductive phenology, effort, and success of four alpine plant species belonging to three different life forms in a semiarid, alpine meadow ecosystem on the central Tibetan Plateau. Our results indicate that warming and snow addition change reproductive phenology and success, but responses are not uniform across species. Moreover, traits associated with resource acquisition, such as rooting depth and life history (early vs. late flowering), mediate plant phenology, and reproductive responses to changing climatic conditions. Specifically, we found that warming delayed the reproductive phenology and decreased number of inflorescences of Kobresia pygmaea C. B. Clarke, a shallow-rooted, early-flowering plant, which may be mainly constrained by upper-soil moisture availability. Because K. pygmaea is the dominant species in the alpine meadow ecosystem, these results may have important implications for ecosystem dynamics and for pastoralists and wildlife in the region. PMID:23504784

  15. Additional Treatment Services in a Cocaine Treatment Study: Level of Services Obtained and Impact on Outcome

    PubMed Central

    Worley, Matthew; Gallop, Robert; Gibbons, Mary Beth Connolly; Ring-Kurtz, Sarah; Present, Julie; Weiss, Roger D.; Crits-Christoph, Paul

    2009-01-01

    The objective of this study was to examine the level of additional treatment services obtained by patients enrolled in the NIDA Cocaine Collaborative Study, a multi-center efficacy trial of four treatments for cocaine dependence, and to determine whether these services impact treatment outcome. Cocaine-dependent patients (N = 487) were recruited at five sites and randomly assigned to six months of one of four psychosocial treatments. Assessments were made at baseline, monthly during treatment, and at follow-ups at 9, 12, 15, and 18 months post-randomization. On average, patients received little or no additional treatment services during active treatment (first 6 months), but the rate of obtaining most services increased during the follow-up phase (month 7 to 18). In general, the treatment groups did not differ in the rates of obtaining non-protocol services. For all treatment groups, patients with greater psychiatric severity received more medical and psychiatric services during active treatment and follow-up. Use of treatment services was unrelated to drug use outcomes during active treatment. However, during the follow-up period, increased use of psychiatric medication, 12-step attendance, and 12-step participation was related to less drug use. The results suggest that during uncontrolled follow-up phases, additional non-protocol services may potentially confound the interpretation of treatment group comparisons in drug use outcomes. PMID:18463998

  16. Electrostatic camera system functional design study

    NASA Technical Reports Server (NTRS)

    Botticelli, R. A.; Cook, F. J.; Moore, R. F.

    1972-01-01

    A functional design study for an electrostatic camera system for application to planetary missions is presented. The electrostatic camera can produce and store a large number of pictures and provide for transmission of the stored information at arbitrary times after exposure. Preliminary configuration drawings and circuit diagrams for the system are illustrated. The camera system's size, weight, power consumption, and performance are characterized. Tradeoffs between system weight, power, and storage capacity are identified.

  17. Structural and Functional Studies of Archaeal Viruses*

    PubMed Central

    Lawrence, C. Martin; Menon, Smita; Eilers, Brian J.; Bothner, Brian; Khayat, Reza; Douglas, Trevor; Young, Mark J.

    2009-01-01

    Viruses populate virtually every ecosystem on the planet, including the extreme acidic, thermal, and saline environments where archaeal organisms can dominate. For example, recent studies have identified crenarchaeal viruses in the hot springs of Yellowstone National Park and other high temperature environments worldwide. These viruses are often morphologically and genetically unique, with genomes that show little similarity to genes of known function, complicating efforts to understand their viral life cycles. Here, we review progress in understanding these fascinating viruses at the molecular level and the evolutionary insights coming from these studies. PMID:19158076

  18. Structural and functional studies of archaeal viruses.

    PubMed

    Lawrence, C Martin; Menon, Smita; Eilers, Brian J; Bothner, Brian; Khayat, Reza; Douglas, Trevor; Young, Mark J

    2009-05-01

    Viruses populate virtually every ecosystem on the planet, including the extreme acidic, thermal, and saline environments where archaeal organisms can dominate. For example, recent studies have identified crenarchaeal viruses in the hot springs of Yellowstone National Park and other high temperature environments worldwide. These viruses are often morphologically and genetically unique, with genomes that show little similarity to genes of known function, complicating efforts to understand their viral life cycles. Here, we review progress in understanding these fascinating viruses at the molecular level and the evolutionary insights coming from these studies. PMID:19158076

  19. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    DOE PAGESBeta

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused bymore » a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.« less

  20. Isomeric Selective Studies of the Dominant Addition Channel in OH Initiated Oxidation of Isoprene

    NASA Astrophysics Data System (ADS)

    Ghosh, B.; Bugarin, A.; Connell, B.; North, S. W.

    2009-12-01

    We report the first isomeric selective study of the dominant isomeric pathway in the OH initiated oxidation of isoprene in the presence of O2 and NO using the Laser Photolysis-Laser Induced Fluorescence (LP-LIF) technique. The photolysis of monodeuterated/non deuterated 2-iodo-2-methyl-but-3-en-1-ol results exclusively in the dominant OH-isoprene addition product, providing important insight into the oxidation mechanism. Based on kinetic analysis of OH cycling experiments we have determined the rate constant for O2 addition to the hydroxy alkyl radical to be (1.0±0.5) × 10^(-12) cm^(3) s^(-1) and we find a value of (8.05±2.3) × 10^(-12) cm^(3) s^(-1) for the overall reaction rate constant of the hydroxy peroxy radical with NO. We also report the first clear experimental evidence of the (E-) form of the δ-hydroxyalkoxy channel through isotopic labeling experiments and quantify its branching ratio to be 0.1±0.025. Since it corresponds to missing carbon balance in isoprene oxidation, we have been able to identify some of the missing carbon balance. Since our measured isomeric selective rate constants for the dominant outer channel in OH initiated isoprene chemistry are similar to the overall rate constants derived from non isomeric kinetics, we predict that the remaining outer addition channel will have similar reactivity. We have extended this study to the OH initiated oxidation of 1,3-butadiene. We have obtained isomeric selective rate constants on the dominant channel of the butadiene oxidation chemistry and measured the branching ratio for the δ-hydroxyalkoxy channel. These results on butadiene studies will be discussed.

  1. Non-invasive cardiac index monitoring during cardiopulmonary functional testing provides additional prognostic value in patients after acute heart failure.

    PubMed

    Lee, Ming-Feng; Chen, Wei-Siang; Fu, Tieh-Cheng; Liu, Min-Hui; Wang, Jong-Shyan; Hsu, Chih-Chin; Huang, Yu-Yen; Cherng, Wen-Jin; Wang, Chao-Hung

    2012-01-01

    The prognostic value of parameters derived from a cardiopulmonary exercise test (CPET) is well established in patients stabilized after acute heart failure (HF). Under multidisciplinary disease management, this study sought to test whether noninvasive cardiac output (CO) monitoring (NICOM) during the CPET provides additional prognostic value. In total, 131 patients stabilized after acute HF agreed to undergo the CPET with NICOM. Outcome follow-up focused on composite events of death and HF-related rehospitalization. Patients with a peak cardiac index (CI) of ≤ 4.5 L/minute/ m(2) (n = 32), compared to those with a peak CI of > 4.5 L/minute/m(2) (n = 99), had higher incidences of diabetes mellitus (DM) and hypertension, but had lower hemoglobin levels, estimated glomerular filtration rates (eGFR), oxygen uptake efficiency slope (OUES), and peak oxygen uptake (VO(2)). During the 1.2 ± 0.7 years of follow-up, there were 8 (6.1%) deaths, and 16 (12.2%) HF-related rehospitalizations. In a Cox univariable analysis, a lower event-free survival was associated with a history of DM, a higher Ve/VCO(2) slope, lower peak VCO(2) and eGFR, and a peak CI of ≤ 4.5 L/minute/ m(2) (P < 0.05). The Cox multivariable analysis showed that the Ve/VCO(2) slope (hazard ratio (HR) = 1.08, 95% confidence interval (CI): 1.01~1.16, P = 0.02) and peak CI of ≤ 4.5 L/minute/m(2 )(HR = 3.26, 95% CI: 1.18~9.01, P = 0.02) were significant independent predictors. In conclusion, NICOM during the CPET was demonstrated to provide prognostic information in addition to traditional risk factors, biomarkers, and other well-established CPET parameters. PMID:23258137

  2. Forest soil CO2 fluxes as a function of understory removal and N-fixing species addition.

    PubMed

    Li, Haifang; Fu, Shenglei; Zhao, Hongting; Xia, Hanping

    2011-01-01

    We report on the effects of forest management practices of understory removal and N-fixing species (Cassia alata) addition on soil CO2 fluxes in an Eucalyptus urophylla plantation (EUp), Acacia crassicarpa plantation (ACp), 10-species-mixed plantation (Tp), and 30-species-mixed plantation (THp) using the static chamber method in southern China. Four forest management treatments, including (1) understory removal (UR); (2) C. alata addition (CA); (3) understory removal and replacement with C. alata (UR+CA); and (4) control without any disturbances (CK), were applied in the above four forest plantations with three replications for each treatment. The results showed that soil CO2 fluxes rates remained at a high level during the rainy season (from April to September), followed by a rapid decrease after October reaching a minimum in February. Soil CO2 fluxes were significantly higher (P < 0.01) in EUp (132.6 mg/(m2 x hr)) and ACp (139.8 mg/(m2 x hr)) than in Tp (94.0 mg/(m2 x hr)) and THp (102.9 mg/(m2 x hr)). Soil CO2 fluxes in UR and CA were significantly higher (P < 0.01) among the four treatments, with values of 105.7, 120.4, 133.6 and 112.2 mg/(m2 x hr) for UR+CA, UR, CA and CK, respectively. Soil CO2 fluxes were positively correlated with soil temperature (P < 0.01), soil moisture (P < 0.01), NO3(-)-N (P < 0.05), and litterfall (P < 0.01), indicating that all these factors might be important controlling variables for soil CO2 fluxes. This study sheds some light on our understanding of soil CO2 flux dynamics in forest plantations under various management practices. PMID:22066218

  3. Improving wound care simulation with the addition of odor: a descriptive, quasi-experimental study.

    PubMed

    Roberson, Donna W; Neil, Janice A; Bryant, Elizabeth T

    2008-08-01

    Improving problem-solving skills and expertise in complex clinical care provision requires engaging students in the learning process--a challenging goal when clinical practicums and supervisors are limited. High-fidelity simulation has created many new opportunities for educating healthcare professionals. Because addressing malodorous wounds is a common problem that may be difficult to "teach," a descriptive, quasi-experimental simulation study was conducted. Following completion of a wound care simulation and Laerdal's Simulation Experience Evaluation Tool by 137 undergraduate nursing students, 50 control subjects were randomly selected and 49 volunteer students (experimental group) participated in a wound care simulation after one of three cheeses with a strong odor was added to simulate a malodorous wound. Compared to the control group, study group responses were significantly better (P <0.001) for eight of the 12 survey variables tested and indicated the addition of odor was beneficial in enhancing the perceived realism and value of the simulation. Students responded that the addition of odor in the simulation laboratory improved realism and they felt better prepared to handle malodorous wounds in a clinical setting. An unanticipated outcome was the enhanced feeling of involvement associated with paired care teams as opposed to working in larger groups. The results of this study indicate that wound care education outcomes improve when nursing students are able to practice using a multi-sensorial wound care simulation model. PMID:18716340

  4. Chemical functionalization of graphene by carbene cycloaddition: A density functional theory study

    NASA Astrophysics Data System (ADS)

    Zan, Wenyan

    2014-08-01

    In this work, we have systematically studied the structural, energetic and electronic properties of graphene functionalized with carbene groups by using density functional theory. Introducing a low concentration of CCl2 group in graphene was studied in detail by DFT, and closed cyclopropane-like three-membered ring structure was formed, meanwhile, the potential candidate carbene groups CR2 (R = H, F, CH3, CN, NO2, OCH3, CCH, C6H5) were added to graphene sheet, and CR2 (R = H, NO2, CH3) groups were expected to be good reactive species to covalently modify graphene. The graphene functionalization with carbene groups above can open graphene's band gap. More CCl2 molecules were added to graphene, and different concentrations of CCl2 group can tune graphene's band gap. In addition, the addition of CCl2 group to graphene edges was investigated, and the stronger binding energy was found. Multiple CCl2 molecules preferred to be bound with the same edge of graphene nanoribbon. This work provides an insight into the detailed molecular mechanism of graphene functionalization with carbene groups.

  5. Lung Function Monitoring; A Randomized Agreement Study

    PubMed Central

    Berntsen, Sveinung; Stølevik, Solvor B.; Mowinckel, Petter; Nystad, Wenche; Stensrud, Trine

    2016-01-01

    Objective: To determine the agreement between devices and repeatability within devices of the forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), peak expiratory flow (PEF) and forced expiratory flow at 50% of FVC (FEF50) values measured using the four spirometers included in the study. Methods: 50 (24 women) participants (20-64 years of age) completed maximum forced expiratory flow manoeuvres and measurements were performed using the following devices: MasterScreen, SensorMedics, Oxycon Pro and SpiroUSB. The order of the instruments tested was randomized and blinded for both the participants and the technicians. Re-testing was conducted on a following day within 72 hours at the same time of the day. Results: The devices which obtained the most comparable values for all lung function variables were SensorMedics and Oxycon Pro, and MasterScreen and SpiroUSB. For FEV1, mean difference was 0.04 L (95% confidence interval; -0.05, 0.14) and 0.00 L (-0.06, 0.06), respectively. When using the criterion of FVC and FEV1 ≤ 0.150 L for acceptable repeatability, 67% of the comparisons of the measured lung function values obtained by the four devices were acceptable. Overall, Oxycon Pro obtained most frequently values of the lung function variables with highest precision as indicated by the coefficients of repeatability (CR), followed by MasterScreen, SensorMedics and SpiroUSB (e.g. min-max CR for FEV1; 0.27-0.46). Conclusion: The present study confirms that measurements obtained by the same device at different times can be compared; however, measured lung function values may differ depending on spirometers used. PMID:27583055

  6. A water soluble additive to suppress respirable dust from concrete-cutting chainsaws: a case study.

    PubMed

    Summers, Michael P; Parmigiani, John P

    2015-01-01

    Respirable dust is of particular concern in the construction industry because it contains crystalline silica. Respirable forms of silica are a severe health threat because they heighten the risk of numerous respirable diseases. Concrete cutting, a common work practice in the construction industry, is a major contributor to dust generation. No studies have been found that focus on the dust suppression of concrete-cutting chainsaws, presumably because, during normal operation water is supplied continuously and copiously to the dust generation points. However, there is a desire to better understand dust creation at low water flow rates. In this case study, a water-soluble surfactant additive was used in the chainsaw's water supply. Cutting was performed on a free-standing concrete wall in a covered outdoor lab with a hand-held, gas-powered, concrete-cutting chainsaw. Air was sampled at the operator's lapel, and around the concrete wall to simulate nearby personnel. Two additive concentrations were tested (2.0% and 0.2%), across a range of fluid flow rates (0.38-3.8 Lpm [0.1-1.0 gpm] at 0.38 Lpm [0.1 gpm] increments). Results indicate that when a lower concentration of additive is used exposure levels increase. However, all exposure levels, once adjusted for 3 hours of continuous cutting in an 8-hour work shift, are below the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 5 mg/m(3). Estimates were made using trend lines to predict the fluid flow rates that would cause respirable dust exposure to exceed both the OSHA PEL and the American Conference of Governmental Industrial Hygienists (ACGIH®) threshold limit value (TLV). PMID:25714034

  7. Augmenting a Waste Glass Mixture Experiment Study with Additional Glass Components and Experimental Runs

    SciTech Connect

    Piepel, Gregory F. ); Cooley, Scott K. ); Peeler, David K.; Vienna, John D. ); Edwards, Tommy B.

    2002-01-01

    A glass composition variation study (CVS) for high-level waste (HLW) stored in Idaho is being statistically designed and performed in phases over several years. The purpose of the CVS is to investigate and model how HLW-glass properties depend on glass composition. The resulting glass property-composition models will be used to develop desirable glass formulations and for other purposes. Phases 1 and 2 of the CVS have been completed and are briefly described. This paper focuses on the CVS Phase 3 experimental design, which was chosen to augment the Phase 1 and 2 data with additional data points, as well as to account for additional glass components not studied in Phases 1 and/or 2. In total, 16 glass components were varied in the Phase 3 experimental design. The paper describes how these Phase 3 experimental design augmentation challenges were addressed using the previous data, preliminary property-composition models, and statistical mixture experiment and optimal experimental design methods and software.

  8. The guanidine and maleic acid (1:1) complex. The additional theoretical and experimental studies

    NASA Astrophysics Data System (ADS)

    Drozd, Marek; Dudzic, Damian

    2012-04-01

    On the basis of experimental literature data the theoretical studies for guanidinium and maleic acid complex with using DFT method are performed. In these studies the experimental X-ray data for two different forms of investigated crystal were used. During the geometry optimization process one equilibrium structure was found, only. According to this result the infrared spectrum for one theoretical molecule was calculated. On the basis of potential energy distribution (PED) analysis the clear-cut assignments of observed bands were performed. For the calculated molecule with energy minimum the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were obtained and graphically illustrated. The energy difference (GAP) between HOMO and LUMO was analyzed. Additionally, the nonlinear properties of this molecule were calculated. The α and β (first and second order) hyperpolarizability values are obtained. On the basis of these results the title crystal was classified as new second order NLO generator.

  9. Prazosin addition to fluvoxamine: A preclinical study and open clinical trial in OCD.

    PubMed

    Feenstra, Matthijs G P; Klompmakers, André; Figee, Martijn; Fluitman, Sjoerd; Vulink, Nienke; Westenberg, Herman G M; Denys, Damiaan

    2016-02-01

    The efficacy of selective serotonin reuptake inhibitors (SRIs) in psychiatric disorders may be "augmented" through the addition of atypical antipsychotic drugs. A synergistic increase in dopamine (DA) release in the prefrontal cortex has been suggested to underlie this augmentation effect, though the mechanism of action is not clear yet. We used in vivo microdialysis in rats to study DA release following the administration of combinations of fluvoxamine (10 mg/kg) and quetiapine (10 mg/kg) with various monoamine-related drugs. The results confirmed that the selective 5-HT1A antagonist WAY-100635 (0.05 mg/kg) partially blocked the fluvoxamine-quetiapine synergistic effect (maximum DA increase dropped from 325% to 214%). A novel finding is that the α1-adrenergic blocker prazosin (1 mg/kg), combined with fluvoxamine, partially mimicked the effect of augmentation (maximum DA increase 205%; area-under-the-curve 163%). As this suggested that prazosin augmentation might be tested in a clinical study, we performed an open clinical trial of prazosin 20 mg addition to SRI in therapy-resistant patients with obsessive-compulsive disorder applying for neurosurgery. A small, non-significant reduction in Yale Brown Obsessive Compulsive Scale (Y-BOCS) scores was observed in 10 patients and one patient was classified as a responder with a reduction in Y-BOCS scores of more than 25%. We suggest that future clinical studies augmenting SRIs with an α1-adrenergic blocker in less treatment resistant cases should be considered. The clinical trial "Prazosin in combination with a serotonin reuptake inhibitor for patients with Obsessive Compulsive disorder: an open label study" was registered at 24/05/2011 under trial number ISRCTN61562706: http://www.controlled-trials.com/ISRCTN61562706. PMID:26712326

  10. Study of NiO cathode modified by ZnO additive for MCFC

    NASA Astrophysics Data System (ADS)

    Huang, Bo; Li, Fei; Yu, Qing-chun; Chen, Gang; Zhao, Bin-yuan; Hu, Ke-ao

    The preparation and subsequent oxidation of nickel cathodes modified by impregnation with zinc oxide (ZnO) were evaluated by surface and bulk analysis. The electrochemical behaviors of ZnO impregnated NiO cathodes was also evaluated in a molten 62 mol% Li 2CO 3 + 38 mol% K 2CO 3 eutectic at 650 °C by electrochemical impedance spectroscopy (EIS) as a function of ZnO content and immersion time. The ZnO impregnated nickel cathodes showed the similar porosity, pore size distribution and morphology to the reference nickel cathode. The stability tests of ZnO impregnated NiO cathodes showed that the ZnO additive could dramatically reduce the solubility of NiO in a eutectic carbonate mixture under the standard cathode gas condition. The impedance spectra for cathode materials show important variations during the 100 h of immersion. The incorporation of lithium in its structure and the low dissolution of nickel oxide and zinc oxide are responsible of these changes. After that, the structure reaches a stable state. The cathode material having 2 mol% of ZnO showed a very low dissolution and a good catalytic efficiency close to the NiO value. We thought that 2 mol% ZnO/NiO materials would be able to adapt as alternative cathode materials for MCFCs.

  11. Hybrid functional study of α-uranium

    NASA Astrophysics Data System (ADS)

    Kaur, Gurpreet; Chinnappan, Ravi; Panigrahi, B. K.

    2016-05-01

    We have used the hybrid density functionals to study the structural and electronic properties of alpha-U. The fraction of exact Hartree Folk exchange used is varied from 0.0 to 0.6. The equilibrium volume is found to be underestimated and bulk modulus overestimated with HSE as compared to both calculated by PBE and the experimental values. Electronic bands below the Fermi level are found to shift to lower energy with respect to PBE electronic bands which itself gives the bands shifted to lower energies as compared to UPS experiments.

  12. Impact of contacting study authors to obtain additional data for systematic reviews: diagnostic accuracy studies for hepatic fibrosis

    PubMed Central

    2014-01-01

    Background Seventeen of 172 included studies in a recent systematic review of blood tests for hepatic fibrosis or cirrhosis reported diagnostic accuracy results discordant from 2 × 2 tables, and 60 studies reported inadequate data to construct 2 × 2 tables. This study explores the yield of contacting authors of diagnostic accuracy studies and impact on the systematic review findings. Methods Sixty-six corresponding authors were sent letters requesting additional information or clarification of data from 77 studies. Data received from the authors were synthesized with data included in the previous review, and diagnostic accuracy sensitivities, specificities, and positive and likelihood ratios were recalculated. Results Of the 66 authors, 68% were successfully contacted and 42% provided additional data for 29 out of 77 studies (38%). All authors who provided data at all did so by the third emailed request (ten authors provided data after one request). Authors of more recent studies were more likely to be located and provide data compared to authors of older studies. The effects of requests for additional data on the conclusions regarding the utility of blood tests to identify patients with clinically significant fibrosis or cirrhosis were generally small for ten out of 12 tests. Additional data resulted in reclassification (using median likelihood ratio estimates) from less useful to moderately useful or vice versa for the remaining two blood tests and enabled the calculation of an estimate for a third blood test for which previously the data had been insufficient to do so. We did not identify a clear pattern for the directional impact of additional data on estimates of diagnostic accuracy. Conclusions We successfully contacted and received results from 42% of authors who provided data for 38% of included studies. Contacting authors of studies evaluating the diagnostic accuracy of serum biomarkers for hepatic fibrosis and cirrhosis in hepatitis C patients

  13. An efficacy study on improving balance and gait in subacute stroke patients by balance training with additional motor imagery: a pilot study

    PubMed Central

    Bae, Young-Hyeon; Ko, YoungJun; Ha, HyunGeun; Ahn, So Yeon; Lee, WanHee; Lee, Suk Min

    2015-01-01

    [Purpose] The few studies conducted on subacute stroke patients have focused only on gait function improvement. This study therefore aimed to confirm the effect of balance training with additional motor imagery on balance and gait improvement in subacute stroke patients. [Subjects and Methods] Participants were divided into an experimental or control group. The experimental group received balance training for 20 minutes/day with mental imagery for 10 minutes/day, three days/week, for four weeks. The control group received only balance training for 30 minutes. Before and after the 12 sessions, balance and gait ability were assessed by the researcher and a physical therapist. [Results] After completion of the 4-week intervention, Berg Balance Scale, Timed Up and Go test, Functional Reach Test, and Four Square Step test scores significantly increased in the experimental group. In the control group, Berg Balance Scale and Functional Reach Test scores significantly improved. Changes in the Timed Up and Go test, Functional Reach Test, and Four Square Step Test scores after intervention were significantly higher in the experimental than in the control group. [Conclusion] Specific balance training with additional motor imagery may result in better rehabilitation outcomes of gait and balance ability than balance training alone. PMID:26644684

  14. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives

    NASA Astrophysics Data System (ADS)

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-11-01

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L-1, or to Vc at a concentration less than 300 mg L-1, there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L-1 of ZnO NPs and 300 mg L-1 of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the

  15. Thermal analysis studies of Ge additive of Se-Te glasses

    NASA Astrophysics Data System (ADS)

    Mohamed, M.; Abdel-Rahim, M. A.

    2016-04-01

    Ge x Se50Te50- x ( x = 5, 15, 20, 35 at.%) bulk glasses were synthesized by the melt quenching method. The amorphous nature of the investigated glasses was determined by X-ray diffraction. Results of differential scanning calorimetry (DSC) of the studied compositions under non-isothermal conditions were reported and discussed. The glass transition temperature ( T g), onset crystallization temperature ( T c), and crystallization peak temperature ( T p) were determined from DSC traces at different heating rates. It was found that the values of T g, T c, and T p rely on both composition and heating rate. A double crystallization stages were observed in the DSC results. Various kinetics parameters such as the glass transition energy ( E g), crystallization activation energy ( E c), and rate constant ( K p) were calculated. The glass-forming ability of the studied compositions was discussed as function of the determined kinetics parameters.

  16. Studying Functions of All Yeast Genes Simultaneously

    NASA Technical Reports Server (NTRS)

    Stolc, Viktor; Eason, Robert G.; Poumand, Nader; Herman, Zelek S.; Davis, Ronald W.; Anthony Kevin; Jejelowo, Olufisayo

    2006-01-01

    A method of studying the functions of all the genes of a given species of microorganism simultaneously has been developed in experiments on Saccharomyces cerevisiae (commonly known as baker's or brewer's yeast). It is already known that many yeast genes perform functions similar to those of corresponding human genes; therefore, by facilitating understanding of yeast genes, the method may ultimately also contribute to the knowledge needed to treat some diseases in humans. Because of the complexity of the method and the highly specialized nature of the underlying knowledge, it is possible to give only a brief and sketchy summary here. The method involves the use of unique synthetic deoxyribonucleic acid (DNA) sequences that are denoted as DNA bar codes because of their utility as molecular labels. The method also involves the disruption of gene functions through deletion of genes. Saccharomyces cerevisiae is a particularly powerful experimental system in that multiple deletion strains easily can be pooled for parallel growth assays. Individual deletion strains recently have been created for 5,918 open reading frames, representing nearly all of the estimated 6,000 genetic loci of Saccharomyces cerevisiae. Tagging of each deletion strain with one or two unique 20-nucleotide sequences enables identification of genes affected by specific growth conditions, without prior knowledge of gene functions. Hybridization of bar-code DNA to oligonucleotide arrays can be used to measure the growth rate of each strain over several cell-division generations. The growth rate thus measured serves as an index of the fitness of the strain.

  17. A study of pyrazines in cigarettes and how additives might be used to enhance tobacco addiction

    PubMed Central

    Alpert, Hillel R; Agaku, Israel T; Connolly, Gregory N

    2016-01-01

    Background Nicotine is known as the drug that is responsible for the addicted behaviour of tobacco users, but it has poor reinforcing effects when administered alone. Tobacco product design features enhance abuse liability by (A) optimising the dynamic delivery of nicotine to central nervous system receptors, and affecting smokers’ withdrawal symptoms, mood and behaviour; and (B) effecting conditioned learning, through sensory cues, including aroma, touch and visual stimulation, to create perceptions of pending nicotine reward. This study examines the use of additives called ‘pyrazines’, which may enhance abuse potential, their introduction in ‘lights’ and subsequently in the highly market successful Marlboro Lights (Gold) cigarettes and eventually many major brands. Methods We conducted internal tobacco industry research using online databases in conjunction with published scientific literature research, based on an iterative feedback process. Results Tobacco manufacturers developed the use of a range of compounds, including pyrazines, in order to enhance ‘light’ cigarette products’ acceptance and sales. Pyrazines with chemosensory and pharmacological effects were incorporated in the first ‘full-flavour, low-tar’ product achieving high market success. Such additives may enhance dependence by helping to optimise nicotine delivery and dosing and through cueing and learned behaviour. Conclusions Cigarette additives and ingredients with chemosensory effects that promote addiction by acting synergistically with nicotine, increasing product appeal, easing smoking initiation, discouraging cessation or promoting relapse should be regulated by the US Food and Drug Administration. Current models of tobacco abuse liability could be revised to include more explicit roles with regard to non-nicotine constituents that enhance abuse potential. PMID:26063608

  18. Nutritional, Health, and Technological Functionality of Lupin Flour Addition to Bread and Other Baked Products: Benefits and Challenges.

    PubMed

    Villarino, C B J; Jayasena, V; Coorey, R; Chakrabarti-Bell, S; Johnson, S K

    2016-01-01

    Lupin is an undervalued legume despite its high protein and dietary fiber content and potential health benefits. This review focuses on the nutritional value, health benefits, and technological effects of incorporating lupin flour into wheat-based bread. Results of clinical studies suggest that consuming lupin compared to wheat bread and other baked products reduce chronic disease risk markers; possibly due to increased protein and dietary fiber and bioactive compounds. However, lupin protein allergy has also been recorded. Bread quality has been improved when 10% lupin flour is substituted for refined wheat flour; possibly due to lupin-wheat protein cross-linking assisting bread volume and the high water-binding capacity (WBC) of lupin fiber delaying staling. Above 10% substitution appears to reduce bread quality due to lupin proteins low elasticity and the high WBC of its dietary fiber interrupting gluten network development. Gaps in understanding of the role of lupin flour in bread quality include the optimal formulation and processing conditions to maximize lupin incorporation, role of protein cross-linking, antistaling functionality, and bioactivity of its γ-conglutin protein. PMID:25675266

  19. A Non-Additive Interaction of a Functional MAO-A VNTR and Testosterone Predicts Antisocial Behavior

    PubMed Central

    Sjöberg, Rickard L; Ducci, Francesca; Barr, Christina S; Newman, Timothy K; Dell'Osso, Liliana; Virkkunen, Matti; Goldman, David

    2008-01-01

    A functional VNTR polymorphism in the promoter of the monoamine oxidase A gene (MAOA-LPR) has previously been shown to be an important predictor of antisocial behavior in men. Testosterone analogues are known to interact with the MAOA promoter in vitro to influence gene transcription as well as in vivo to influence CSF levels of the MAO metabolite 3-methoxy-4-hydroxyphenylglycol (MHPG) in human males. We examined the possible joint effects of testosterone (measured in CSF) and MAOA-LPR genotype on antisocial personality disorder and scores on the Brown–Goodwin Aggression scale in 95 unrelated male criminal alcoholics and 45 controls. The results confirm that MAOA genotype and CSF testosterone interact to predict antisocial behaviors. The MAOA/testosterone interaction also predicted low levels of CSF MHPG, which tentatively suggests the possibility that the interaction may be mediated by a direct effect on gene transcription. If replicated these findings offer plausible explanations for previous inconsistencies in studies of the relationship between testosterone and male human aggression, as well as for how MAOA genotype may influence aggressive behavior in human males. PMID:17429405

  20. A non-additive interaction of a functional MAO-A VNTR and testosterone predicts antisocial behavior.

    PubMed

    Sjöberg, Rickard L; Ducci, Francesca; Barr, Christina S; Newman, Timothy K; Dell'osso, Liliana; Virkkunen, Matti; Goldman, David

    2008-01-01

    A functional VNTR polymorphism in the promoter of the monoamine oxidase A gene (MAOA-LPR) has previously been shown to be an important predictor of antisocial behavior in men. Testosterone analogues are known to interact with the MAOA promoter in vitro to influence gene transcription as well as in vivo to influence CSF levels of the MAO metabolite 3-methoxy-4-hydroxyphenylglycol (MHPG) in human males. We examined the possible joint effects of testosterone (measured in CSF) and MAOA-LPR genotype on antisocial personality disorder and scores on the Brown-Goodwin Aggression scale in 95 unrelated male criminal alcoholics and 45 controls. The results confirm that MAOA genotype and CSF testosterone interact to predict antisocial behaviors. The MAOA/testosterone interaction also predicted low levels of CSF MHPG, which tentatively suggests the possibility that the interaction may be mediated by a direct effect on gene transcription. If replicated these findings offer plausible explanations for previous inconsistencies in studies of the relationship between testosterone and male human aggression, as well as for how MAOA genotype may influence aggressive behavior in human males. PMID:17429405

  1. Additional follow-up telephone counselling and initial smoking relapse: a longitudinal, controlled study

    PubMed Central

    Wu, Lei; He, Yao; Jiang, Bin; Zuo, Fang; Liu, Qinghui; Zhang, Li; Zhou, Changxi

    2016-01-01

    Objectives Smoking cessation services can help smokers to quit; however, many smoking relapse cases occur over time. Initial relapse prevention should play an important role in achieving the goal of long-term smoking cessation. Several studies have focused on the effect of extended telephone support in relapse prevention, but the conclusions remain conflicting. Design and setting From October 2008 to August 2013, a longitudinal, controlled study was performed in a large general hospital of Beijing. Participants The smokers who sought treatment at our smoking cessation clinic were non-randomised and divided into 2 groups: face-to-face individual counselling group (FC group), and face-to-face individual counselling plus telephone follow-up counselling group (FCF group). No pharmacotherapy was offered. Outcomes The timing of initial smoking relapse was compared between FC and FCF groups. Predictors of initial relapse were investigated during the first 180 days, using the Cox proportional hazards model. Results Of 547 eligible male smokers who volunteered to participate, 457 participants (117 in FC group and 340 in FCF group) achieved at least 24 h abstinence. The majority of the lapse episodes occurred during the first 2 weeks after the quit date. Smokers who did not receive the follow-up telephone counselling (FC group) tended to relapse to smoking earlier than those smokers who received the additional follow-up telephone counselling (FCF group), and the log-rank test was statistically significant (p=0.003). A Cox regression model showed that, in the FCF group, being married, and having a lower Fagerström test score, normal body mass index and doctor-diagnosed tobacco-related chronic diseases, were significantly independent protective predictors of smoking relapse. Conclusions Within the limitations of this study, it can be concluded that additional follow-up telephone counselling might be an effective strategy in preventing relapse. Further research is still

  2. Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology

    PubMed Central

    2014-01-01

    Background This study aimed to establish surgical guiding techniques for completing mandible lesion resection and reconstruction of the mandible defect area with fibula sections in one surgery by applying additive manufacturing technology, which can reduce the surgical duration and enhance the surgical accuracy and success rate. Methods A computer assisted mandible reconstruction planning (CAMRP) program was used to calculate the optimal cutting length and number of fibula pieces and design the fixtures for mandible cutting, registration, and arrangement of the fibula segments. The mandible cutting and registering fixtures were then generated using an additive manufacturing system. The CAMRP calculated the optimal fibula cutting length and number of segments based on the location and length of the defective portion of the mandible. The mandible cutting jig was generated according to the boundary surface of the lesion resection on the mandible STL model. The fibular cutting fixture was based on the length of each segment, and the registered fixture was used to quickly arrange the fibula pieces into the shape of the defect area. In this study, the mandibular lesion was reconstructed using registered fibular sections in one step, and the method is very easy to perform. Results and conclusion The application of additive manufacturing technology provided customized models and the cutting fixtures and registered fixtures, which can improve the efficiency of clinical application. This study showed that the cutting fixture helped to rapidly complete lesion resection and fibula cutting, and the registered fixture enabled arrangement of the fibula pieces and allowed completion of the mandible reconstruction in a timely manner. Our method can overcome the disadvantages of traditional surgery, which requires a long and different course of treatment and is liable to cause error. With the help of optimal cutting planning by the CAMRP and the 3D printed mandible resection jig and

  3. Catalytic addition methods for the synthesis of functionalized diazoacetoacetates and application to the construction of highly substituted cyclobutanones.

    PubMed

    Doyle, Michael P; Kundu, Kousik; Russell, Albert E

    2005-11-10

    [reaction: see text] Methyl 3-(trialkylsilanyloxy)-2-diazo-3-butenoate undergoes Lewis acid-catalyzed Mukaiyama aldol addition with aromatic and aliphatic aldehydes in the presence of low catalytic amounts of Lewis acids in nearly quantitative yields. Scandium(III) triflate is the preferred catalyst and, notably, addition proceeds without decomposition of the diazo moiety. Diazoacetoacetate products from reactions with aromatic aldehydes undergo rhodium(II)-catalyzed ring closure to cyclobutanones with high diastereocontrol. Examples of complimentary Mannich-type addition reactions with imines are reported. PMID:16268530

  4. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    SciTech Connect

    Stierum, Rob . E-mail: stierum@voeding.tno.nl; Heijne, Wilbert; Kienhuis, Anne; Ommen, Ben van; Groten, John

    2005-09-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicological assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole.

  5. Assessment of Nano Cellulose from Peach Palm Residue as Potential Food Additive: Part II: Preliminary Studies.

    PubMed

    Andrade, Dayanne Regina Mendes; Mendonça, Márcia Helena; Helm, Cristiane Vieira; Magalhães, Washington L E; de Muniz, Graciela Ines Bonzon; Kestur, Satyanarayana G

    2015-09-01

    High consumption of dietary fibers in the diet is related to the reduction of the risk of non-transmitting of chronic diseases, prevention of the constipation etc. Rich diets in dietary fibers promote beneficial effects for the metabolism. Considering the above and recognizing the multifaceted advantages of nano materials, there have been many attempts in recent times to use the nano materials in the food sector including as food additive. However, whenever new product for human and animal consumption is developed, it has to be tested for their effectiveness regarding improvement in the health of consumers, safety aspects and side effects. However, before it is tried with human beings, normally such materials would be assessed through biological tests on a living organism to understand its effect on health condition of the consumer. Accordingly, based on the authors' finding reported in a previous paper, this paper presents body weight, biochemical (glucose, cholesterol and lipid profile in blood, analysis of feces) and histological tests carried out with biomass based cellulose nano fibrils prepared by the authors for its possible use as food additive. Preliminary results of the study with mice have clearly brought out potential of these fibers for the said purpose. PMID:26344977

  6. Effects of the colour additive caramel colour III on the immune system: a study with human volunteers.

    PubMed

    Houben, G F; Abma, P M; van den Berg, H; van Dokkum, W; van Loveren, H; Penninks, A H; Seinen, W; Spanhaak, S; Vos, J G; Ockhuizen, T

    1992-09-01

    Administration of the colour additive Caramel Colour III to rats has been associated with decreased numbers of lymphocytes and several other changes in the immune system, as well as in immune function parameters, specifically in animals fed a diet with a relatively low vitamin B6 content. The effects are caused by the imidazole derivative 2-acetyl-4(5)-tetrahydroxybutylimidazole (THI). Caramel Colour III is commonly used in food products such as bakery products, soya-bean sauces, brown sauces, gravies, soup aromas, brown (dehydrated) soups, brown malt caramel blend for various applications, vinegars and beers, and effects in humans on dietary intake cannot be excluded. Elderly male volunteers with a marginal deficit in vitamin B6 were considered a relevant and potentially sensitive group to study possible effects of Caramel Colour III on blood lymphocyte numbers (total and within subsets) or on proliferative responses of lymphocytes to mitogenic stimulation. In addition, several other haematological parameters, as well as serum immunoglobulin levels and immunoglobulin production in vitro by pokeweed mitogen-stimulated mononuclear blood cells were studied. The results of this double-blind intervention study demonstrated that in a selected test group of apparently healthy elderly male volunteers with a biochemically marginally deficient vitamin B6 status, Caramel Colour III containing 23 (commercial sample) or 143 (research sample) ppm THI and administered at the level of the current acceptable daily intake of 200 mg/kg body weight/day for 7 days did not affect any of the factors investigated. PMID:1427513

  7. Indigenous perception and characterization of Yanyanku and Ikpiru: two functional additives for the fermentation of African locust bean.

    PubMed

    Agbobatinkpo, Pélagie B; Azokpota, Paulin; Akissoe, Noël; Kayodé, Polycarpe; Da Gbadji, Rachelle; Hounhouigan, D Joseph

    2011-01-01

    Indigenous perception, processing methods, and physicochemical and microbiological characteristics of Yanyanku and Ikpiru, two additives used to produce fermented African locust bean condiments, Sonru and Iru, were evaluated. According to producers, these additives accelerate the fermentation and soften the texture of the condiments. Yanyanku is produced by spontaneous fermentation with either Hibiscus sabdariffa or Gossypium hirsutum or Adansonia digitata seeds, whereas only Hibiscus sabdariffa seeds are used for Ikpiru. Both additives, with pH values ranging between 6.2 and 10 and Bacillus spores varying between 5.5 and 8.9 Log(10) (CFU/g), could be considered as softening additives or enrichment inocula to produce condiments. PMID:21888591

  8. Comparative study of dimensional accuracy of different impression techniques using addition silicone impression material.

    PubMed

    Penaflor, C F; Semacio, R C; De Las Alas, L T; Uy, H G

    1998-01-01

    This study compared dimensional accuracy of the single, double with spacer, double with cut-out and double mix impression technique using addition silicone impression material. A typhodont containing Ivorine teeth model with six (6) full-crown tooth preparations were used as the positive control. Two stone replication models for each impression technique were made as test materials. Accuracy of the techniques were assessed by measuring four dimensions on the stone dies poured from the impression of the Ivorine teeth model. Results indicated that most of the measurements for the height, width and diameter slightly decreased and a few increased compared with the Ivorine teeth model. The double with cut-out and double mix technique presents the least difference from the master model as compared to the two latter impression techniques. PMID:10202524

  9. Spectroscopic studies of nucleic acid additions during seed-mediated growth of gold nanoparticles

    PubMed Central

    Tapp, Maeling; Sullivan, Rick; Dennis, Patrick; Naik, Rajesh R.

    2015-01-01

    The effect of adding nucleic acids to gold seeds during the growth stage of either nanospheres or nanorods was investigated using UV-Vis spectroscopy to reveal any oligonucleotide base or structure-specific effects on nanoparticle growth kinetics or plasmonic signatures. Spectral data indicate that the presence of DNA duplexes during seed ageing drastically accelerated nanosphere growth while the addition of single-stranded polyadenine at any point during seed ageing induces nanosphere aggregation. For seeds added to a gold nanorod growth solution, single-stranded polythymine induces a modest blue-shift in the longitudinal peak wavelength. Moreover, a particular sequence comprised of 50% thymine bases was found to induce a faster, more dramatic blue-shift in the longitudinal peak wavelength compared to any of the homopolymer incubation cases. Monomeric forms of the nucleic acids, however, do not yield discernable spectral differences in any of the gold suspensions studied. PMID:25960601

  10. Study on Friction and Wear Properties of Silver Matrix Brush Material with Different Additives

    NASA Astrophysics Data System (ADS)

    Chen, Xiaoli; Wang, Wenfang; Hong, Yu; Wu, Yucheng

    2013-07-01

    Friction and wear processes of AgCuX (G, CF and AlN) composites-CuAgV alloy friction pair and effects of different additive content in silver based composite on friction and wear behavior are studied in this paper. The microstructure of the brush wear surface is observed by SEM. The results show that when graphite content is up to 9 wt.%, Ag-Cu-CF-G composite exhibits the best wear properties; when the content of aluminum nitride is up to 0.5 wt.%, Ag-Cu-AlN-G composites has the most comprehensive performance. The wear loss of both composites arises with the increase of both pressure and speed, but when speed reaches a critical value, the increased amplitude of wear loss tends to be steady.

  11. Diastereoselective Additive Trifluoromethylation/Halogenation of Isoxazole Triflones: Synthesis of All-Carbon-Functionalized Trifluoromethyl Isoxazoline Triflones

    PubMed Central

    Kawai, Hiroyuki; Sugita, Yutaka; Tokunaga, Etsuko; Sato, Hiroyasu; Shiro, Motoo; Shibata, Norio

    2014-01-01

    Highly functionalized 5-trifluoromethyl-2-isoxazoline derivatives featuring a triflyl (SO2CF3) group at the 4-position were successfully synthesized via diastereoselective trifluoromethylation and halogenation of isoxazole triflones using the Ruppert– Prakash reagent. The trifluoromethylation is quite general in terms of the substrates including 3,5-diaryl isoxazole triflones and 3-aryl-5-styrylisoxazole triflones to provide products in high yields with excellent diastereoselectivities. The highly functionalized 5-trifluoromethyl-2-isoxazoline derivatives are expected to be a new class of antiparasiticides. Thus the triflyl group both activates isoxazoles and the 4-postion of CF3 adducts, and has a potential biological function. PMID:24688889

  12. Addition of home-based cognitive retraining to treatment as usual in first episode schizophrenia patients: A randomized controlled study

    PubMed Central

    Hegde, Shantala; Rao, Shobini L.; Raguram, Ahalya; Gangadhar, Bangalore N.

    2012-01-01

    Objective: We examined the effectiveness of a 2-month-long home-based cognitive retraining program together with treatment as usual (TAU; psychoeducation and drug therapy) on neuropsychological functions, psychopathology, and global functioning in patients with first episode schizophrenia (FES) as well as on psychological health and perception of level of family distress in their caregivers. Materials and Methods: Forty-five FES patients were randomly assigned to either treatment group receiving home-based cognitive retraining along with TAU (n=22) or to control group receiving TAU alone (n=23). Patients and caregivers received psychoeducation. Patients and one of their caregivers were assessed for the above parameters at baseline, post-assessment (2 months) and at 6-months follow-up assessment. Results: Of the 45 patients recruited, 12 in the treatment group and 11 in the control group completed post-intervention and follow-up assessments. Addition of home-based cognitive retraining along with TAU led to significant improvement in neuropsychological functions of divided attention, concept formation and set-shifting ability, and planning. Effect sizes were large, although the sample size was small. Conclusions: Home-based cognitive retraining program has shown promise. However, further studies examining this program on a larger cohort with rigorous design involving independent raters are suggested. PMID:22556432

  13. Serum Potassium and Glucose Regulation in the ADDITION-Leicester Screening Study

    PubMed Central

    Carter, Patrice; Bodicoat, Danielle H.; Quinn, Lauren M.; Zaccardi, Francesco; Webb, David R.; Khunti, Kamlesh; Davies, Melanie J.

    2015-01-01

    Introduction. Previous observational studies have shown conflicting results between plasma K+ concentrations and risk of type 2 diabetes. To help clarify the evidence we aimed to determine whether an association existed between serum K+ and glucose regulation within a UK multiethnic population. Methods. Participants were recruited as part of the ADDITION Leicester study, a population based screening study. Individuals from primary care between the age of 40 and 75 years if White European or 25 and 75 years if South Asian or Afro Caribbean were recruited. Tests for associations between baseline characteristics and K+ quartiles were conducted using linear regression models. Results. Data showed individuals in the lowest K+ quartile had significantly greater 2-hour glucose levels (0.53 mmol/L, 95% CI: 0.36 to 0.70, P ≤ 0.001) than those in the highest K+ quartile. This estimation did not change with adjustment for potential confounders. Conversely, participants in the lowest K+ quartile had a 0.14% lower HbA1c (95% CI −0.19 to −0.10: P ≤ 0.001) compared to those in the highest K+ quartile. Conclusion. This cross-sectional analysis demonstrated that lower K+ was associated with greater 2 hr glucose. The data supports the possibility that K+ may influence glucose regulation and further research is warranted. PMID:25883988

  14. Study of triallyl phosphate as an electrolyte additive for high voltage lithium-ion cells

    NASA Astrophysics Data System (ADS)

    Xia, J.; Madec, L.; Ma, L.; Ellis, L. D.; Qiu, W.; Nelson, K. J.; Lu, Z.; Dahn, J. R.

    2015-11-01

    The role of triallyl phosphate as an electrolyte additive in Li(Ni0.42Mn0.42Co0.16)O2/graphite pouch cells was studied using ex-situ gas measurements, ultra high precision coulometry, automated storage experiments, electrochemical impedance spectroscopy, long-term cycling and X-ray photoelectron spectroscopy. Cells containing triallyl phosphate produced less gas during formation, cycling and storage than control cells. The use of triallyl phosphate led to higher coulombic efficiency and smaller charge endpoint capacity slippage during ultra high precision charger testing. Cells containing triallyl phosphate showed smaller potential drop during 500 h storage at 40 °C and 60 °C and the voltage drop decreased as the triallyl phosphate content in the electrolyte increased. However, large amounts of triallyl phosphate (>3% by weight in the electrolyte) led to large impedance after cycling and storage. Symmetric cell studies showed large amounts of triallyl phosphate (5% or more) led to significant impedance increase at both negative and positive electrodes. X-ray photoelectron spectroscopy studies suggested that the high impedance came from the polymerization of triallyl phosphate molecules which formed thick solid electrolyte interphase films at the surfaces of both negative and positive electrodes. An optimal amount of 2%-3% triallyl phosphate led to better capacity retention during long term cycling.

  15. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  16. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  17. Evaluation of calcium and lead interaction, in addition to their impact on thyroid functions in hyper and hypothyroid patients.

    PubMed

    Memon, Nusrat Shahab; Kazi, Tasneem Gul; Afridi, Hassan Imran; Baig, Jameel Ahmed; Arain, Sadaf Sadia; Sahito, Oan Muhammad; Baloch, Shahnawaz; Waris, Muhammad

    2016-01-01

    There is compelling evidence in support of interaction between calcium (Ca) and lead (Pb) in thyroid disorders. The aim of present study was to compare the level of Ca and Pb with thyroid hormones such as thyroid-stimulating hormone (TSH), free triiodothyronine (FT3), and free thyroxin (FT4) in serum samples of hyperthyroid (HPRT) and hypothyroid (HPOT) patients of both genders. For comparative purpose, age-matched (25-50 years) subjects having no thyroid disorders were selected as referents/controls. The serum samples were acid-digested prior to analysis by atomic absorption spectrometry. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data indicates that the mean values of Ca in serum samples of HPRT patients were significantly higher than those of referent subjects (p < 0.01), while reverse pattern was observed in the case of HPOT patients. The level of Pb was higher in the serum samples of both types of thyroid patients, but difference was significant in case of HPOT patients as compare to referent subjects (p < 0.01). A negative correlation was observed between serum Ca levels and TSH of HPRT patients (-r = 0.37-0.39, p < 0.01), while FT3 and FT4 have positive correlation (r = 0.49-0.52 and r = 0.46-0.47), p values <0.01. The Pb in serum had positive correlation with TSH (r = 0.48-0.51, p < 0.005), while negative correlation was observed for FT3 and FT4 (-r = 0.55-0.56, 0.5-0.54, p < 0.05) in HPRT patients. On the other hand, a reverse pattern was observed, for correlation of Ca and Pb with thyroid functions in HPOT patients. PMID:26347420

  18. Improvement in antioxidant functionality and shelf life of yukwa (fried rice snack) by turmeric (Curcuma longa L.) powder addition.

    PubMed

    Lim, Seung-Taik; Han, Jung-Ah

    2016-05-15

    The physico-chemical, oxidative and sensory characteristics of fried rice snack, yukwa with different amounts of turmeric powder (Curcuma longa) were investigated. The moisture content of the pallet ranged from 16.47% to 19.84%. After frying the pallet, a slight decrease in the degree of expansion was obtained with increasing turmeric powder content. The textural properties of yukwa were not changed until the turmeric powder content reached 5%; however, over 8% addition induced a decrease in the hardness and an increase in the crispiness. Oxidative deterioration was effectively inhibited by turmeric powder addition, and more turmeric powder in yukwa led to higher free radical scavenging activity. Based on the sensory characteristics, a 5% addition of turmeric powder was the most acceptable for the yukwa product. In the correlation results among variables, the moisture content of the pallet proved to be the most important factor for yukwa quality. PMID:26776012

  19. Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Manogharan, Guha; Yelamanchi, Bharat; Aman, Ronald; Mahbooba, Zaynab

    2016-03-01

    Over the years, many studies have been conducted to study and analyze the grain structures of metal alloys during additive manufacturing to improve mechanical properties. In particular, columnar grains are observed predominantly during rapid solidification of molten metal. This leads to lower mechanical properties and requires expensive secondary heat-treatment processes. This study is aimed at disrupting the formation of columnar grain growth during rapid solidification using ultrasonic vibration and analyzes the effects on grain structure and mechanical properties. A gas-metal arc welder mounted on a Rep-Rap-based low-cost metal 3 Dimension printer was used to deposit ER70S-6 mild steel layers on a plate. A contact-type ultrasonic transducer with a control system to vary the frequency and power of the vibration was used. The effects of ultrasonic vibration were determined from the statistical analysis of microstructure and micro-indentation techniques on the deposited layer and heat-affected zone. It was found that both frequency and interaction between frequency and power had significant impact on the refinement of average grain size up to 10.64% and increased the number of grains by approximately 41.78%. Analysis of micro-indentation tests showed that there was an increase of approximately 14.30% in micro-hardness due to the applied frequency during rapid solidification. A pole diagram shows that application of vibration causes randomization of grain orientation. Along with the results from this study, further efforts in modeling and experimentation of multi-directional vibrations would lead to a better understanding of disrupting columnar grains in applications that use mechanical vibrations, such as welding, directed energy deposition, brazing, etc.

  20. Study on Antiwear and Repairing Performances about Mass of Nano-copper Lubricating Additives to 45 Steel

    NASA Astrophysics Data System (ADS)

    Wang, X. L.; Yin, Y. L.; Zhang, G. N.; Wang, W. Y.; Zhao, K. K.

    Nano-copper usually serve for lubricating additives in tribology field. The antiwear and reducing friction performances both basic lubrication oil and basic lubrication oil with nano-copper in different mass were tested by friction wear test machine. The morphologies and the main elements of worn surfaces were analyzed by SEM. The results indicated that nano-copper could improve tribology performances of basic lubrication oil. Comparing with base lubrication oil, the mass is 0.15% of nano-copper, the friction coefficient and the worn trace width can be reduced 34% and 32% respectively. Nano-copper can form self-repairing film in lubrication oil which availably separates the friction materials in friction process. Therefore, nano-copper has wonderful antiwear, reducing friction and self-repairing performances. And the function mechanism of Cu nanoparticles is studied in the paper.

  1. A DFT study of addition reaction between fragment ion (CH₂) units and fullerene (C₆₀) molecule.

    PubMed

    Zaragoza, Irineo Pedro; Vergara, Jaime; Pérez-Manríquez, Liliana; Salcedo, Roberto

    2011-05-01

    The theoretical study of the interaction between CH(2) and fullerene (C(60)) suggests the existence of an addition reaction mechanism; this feature is studied by applying an analysis of electronic properties. Several different effects are evident in this interaction as a consequence of the particular electronic transfer which occurs during the procedure. The addition or insertion of the methylene group results in a process, where the inclusion of CH(2) into a fullerene bond produces the formation of several geometric deformations. A simulation of these procedures was carried out, taking advantage of the dynamic semi-classical Born-Oppenheimer approximation. Dynamic aspects were analyzed at different speeds, for the interaction between the CH(2) group and the two bonds: CC (6, 6) and CC (6, 5) respectively on the fullerene (C(60)) rings. All calculations which involved electrons employed DFT as well as exchange and functional correlation. The results indicate a tendency for the CH(2) fragment to attack the CC (6, 5) bond. PMID:20658255

  2. Synthesis, Characterization, Molecular Modeling, and DNA Interaction Studies of Copper Complex Containing Food Additive Carmoisine Dye.

    PubMed

    Shahabadi, Nahid; Akbari, Alireza; Jamshidbeigi, Mina; Khodarahmi, Reza

    2016-06-01

    A copper complex of carmoisine dye; [Cu(carmoisine)2(H2O)2]; was synthesized and characterized by using physico-chemical and spectroscopic methods. The binding of this complex with calf thymus (ct) DNA was investigated by circular dichroism, absorption studies, emission spectroscopy, and viscosity measurements. UV-vis results confirmed that the Cu complex interacted with DNA to form a ground-state complex and the observed binding constant (2× 10(4) M(-1)) is more in keeping with the groove bindings with DNA. Furthermore, the viscosity measurement result showed that the addition of complex causes no significant change on DNA viscosity and it indicated that the intercalation mode is ruled out. The thermodynamic parameters are calculated by van't Hoff equation, which demonstrated that hydrogen bonds and van der Waals interactions played major roles in the reaction. The results of circular dichroism (CD) suggested that the complex can change the conformation of DNA from B-like form toward A-like conformation. The cytotoxicity studies of the carmoisine dye and its copper complex indicated that both of them had anticancer effects on HT-29 (colon cancer) cell line and they may be new candidates for treatment of the colon cancer. PMID:27152751

  3. Percutaneous Dorsal Instrumentation of Vertebral Burst Fractures: Value of Additional Percutaneous Intravertebral Reposition—Cadaver Study

    PubMed Central

    Krüger, Antonio; Schmuck, Maya; Noriega, David C.; Ruchholtz, Steffen; Baroud, Gamal; Oberkircher, Ludwig

    2015-01-01

    Purpose. The treatment of vertebral burst fractures is still controversial. The aim of the study is to evaluate the purpose of additional percutaneous intravertebral reduction when combined with dorsal instrumentation. Methods. In this biomechanical cadaver study twenty-eight spine segments (T11-L3) were used (male donors, mean age 64.9 ± 6.5 years). Burst fractures of L1 were generated using a standardised protocol. After fracture all spines were allocated to four similar groups and randomised according to surgical techniques (posterior instrumentation; posterior instrumentation + intravertebral reduction device + cement augmentation; posterior instrumentation + intravertebral reduction device without cement; and intravertebral reduction device + cement augmentation). After treatment, 100000 cycles (100–600 N, 3 Hz) were applied using a servohydraulic loading frame. Results. Overall anatomical restoration was better in all groups where the intravertebral reduction device was used (p < 0.05). In particular, it was possible to restore central endplates (p > 0.05). All techniques decreased narrowing of the spinal canal. After loading, clearance could be maintained in all groups fitted with the intravertebral reduction device. Narrowing increased in the group treated with dorsal instrumentation. Conclusions. For height and anatomical restoration, the combination of an intravertebral reduction device with dorsal instrumentation showed significantly better results than sole dorsal instrumentation. PMID:26137481

  4. A fundamental study of the oxidation behavior of SI primary reference fuels with propionaldehyde and DTBP as an additive

    NASA Astrophysics Data System (ADS)

    Johnson, Rodney

    In an effort to combine the benefits of SI and CI engines, Homogeneous Charge Compression Ignition (HCCI) engines are being developed. HCCI combustion is achieved by controlling the temperature, pressure, and composition of the fuel and air mixture so that autoignition occurs in proper phasing with the piston motion. This control system is fundamentally more challenging than using a spark plug or fuel injector to determine ignition timing as in SI and CI engines, respectively. As a result, this is a technical barrier that must be overcome to make HCCI engines applicable to a wide range of vehicles and viable for high volume production. One way to tailor the autoignition timing is to use small amounts of ignition enhancing additives. In this study, the effect of the addition of DTBP and propionaldehyde on the autoignition behavior of SI primary reference fuels was investigated. The present work was conducted in a new research facility built around a single cylinder Cooperative Fuels Research (CFR) octane rating engine but modified to run in HCCI mode. It focused on the effect of select oxygenated hydrocarbons on hydrocarbon fuel oxidation, specifically, the primary reference fuels n-heptane and iso-octane. This work was conducted under HCCI operating conditions. Previously, the operating parameters for this engine were validated for stable combustion under a wide range of operating parameters such as engine speeds, equivalence ratios, compression ratios and inlet manifold temperature. The stable operating range under these conditions was recorded and used for the present study. The major focus of this study was to examine the effect of the addition of DTBP or propionaldehyde on the oxidation behavior of SI primary reference fuels. Under every test condition the addition of the additives DTBP and propionaldehyde caused a change in fuel oxidation. DTBP always promoted fuel oxidation while propionaldehyde promoted oxidation for lower octane number fuels and delayed

  5. Using laser diagnostics for studying the injection of a dry additive

    NASA Astrophysics Data System (ADS)

    Tokunov, Iu. M.; Zhilin, V. G.; Liuliukin, V. I.; Mostinskii, I. L.; Putin, Iu. A.

    1987-02-01

    In MHD generators using an ionizing additive, the uniform injection of the additive into the combustion chamber and the dispersity of the injected particles are important. Some of the problems associated with the injection of an ionizing additive can be alleviated by using dry additives. In the experiment reported here, an He-Ne laser was used to monitor the injection of potash powder with an average size of 40 microns. It is shown that laser diagnostics can be successfully used to determine the mean particle diameter and variation of the powder flow rate with time.

  6. Evaluation of additional head of biceps brachii: a study with autopsy material.

    PubMed

    Ballesteros, L E; Forero, P L; Buitrago, E R

    2014-05-01

    Additional head of the biceps brachii (AHBB) has been reported in different population groups with a frequency of 1-25%. The purpose of this study was to determine the incidence and morphologic expression of the AHBB as determined in a sample of the Colombian population. An exploration was conducted with 106 arms corresponding to unclaimed corpses autopsied at Institute of Legal and Forensic Medicine of Bucaramanga, Colombia. Using medial incision involvingskin, subcutaneous tissue, and brachial fascia, the heads of the biceps and their innervating branches were visualised. One AHBB was observed in 21 (19.8%) of the arms evaluated, with non-significant difference (p = 0.568) per side of presentation: 11 (52.4%) cases on the right side and 10 (47.6%) on the left side. All AHBBs were originated in the infero-medial segment of the humerus, with a mean thickness of 17.8 ± 6.8 mm. In 4 (19%) cases the fascicle was thin, less than 10 mm; in 7 (33.3%) cases it was of medium thickness, between 11 and 20 mm, whereas in 47.6% it was longer than 20 mm. The length of the AHBB was 118.3 ± 26.8 mm; its motor point supplied by the musculocutaneous nerve was located at 101.3 ± 20.9 mm of the bi-epicondylar line. The incidence of AHBB in this study is located at the upper segment of what has been reportedin the literature and could be a morphologic trait of the Colombian population; in agreement with prior studies, the origin was the infero-medial surface of the humerus. PMID:24902098

  7. Increased Risk of Additional Cancers Among Patients with Gastrointestinal Stromal Tumors: A Population-Based Study

    PubMed Central

    Murphy, James D.; Ma, Grace L.; Baumgartner, Joel M.; Madlensky, Lisa; Burgoyne, Adam M.; Tang, Chih-Min; Martinez, Maria Elena; Sicklick, Jason K.

    2015-01-01

    Purpose Most gastrointestinal stromal tumors (GIST) are considered non-hereditary or sporadic. However, single-institution studies suggest that GIST patients develop additional malignancies with increased frequencies. We hypothesized that we could gain greater insight into possible associations between GIST and other malignancies using a national cancer database inquiry. Methods Patients diagnosed with GIST (2001–2011) in the Surveillance, Epidemiology, and End Results database were included. Standardized prevalence ratios (SPRs) and standardized incidence ratios (SIRs) were used to quantify cancer risks incurred by GIST patients before and after GIST diagnoses, respectively, when compared with the general U.S. population. Results Of 6,112 GIST patients, 1,047 (17.1%) had additional cancers. There were significant increases in overall cancer rates: 44% (SPR=1.44) before diagnosis and 66% (SIR=1.66) after GIST diagnoses. Malignancies with significantly increased occurrence both before/after diagnoses included other sarcomas (SPR=5.24/SIR=4.02), neuroendocrine-carcinoid tumors (SPR=3.56/SIR=4.79), non-Hodgkin’s lymphoma (SPR=1.69/SIR=1.76), and colorectal adenocarcinoma (SPR=1.51/SIR=2.16). Esophageal adenocarcinoma (SPR=12.0), bladder adenocarcinoma (SPR=7.51), melanoma (SPR=1.46), and prostate adenocarcinoma (SPR=1.20) were significantly more common only before GIST. Ovarian carcinoma (SIR=8.72), small intestine adenocarcinoma (SIR=5.89), papillary thyroid cancer (SIR=5.16), renal cell carcinoma (SIR=4.46), hepatobiliary adenocarcinomas (SIR=3.10), gastric adenocarcinoma (SIR=2.70), pancreatic adenocarcinoma (SIR=2.03), uterine adenocarcinoma (SIR=1.96), non-small cell lung cancer (SIR=1.74), and transitional cell carcinoma of the bladder (SIR=1.65) were significantly more common only after GIST. Conclusion This is the first population-based study to characterize the associations and temporal relationships between GIST and other cancers, both by site and

  8. Additional Language Teaching within the International Baccalaureate Primary Years Programme: A Comparative Study

    ERIC Educational Resources Information Center

    Lebreton, Marlène

    2014-01-01

    The International Baccalaureate Primary Years Programme supports the learning of languages and cultures, but the role of the additional language within this programme is often unclear. There remains a great variability in schools regarding the frequency of lessons and the way that the additional language is taught within the Primary Years…

  9. Beyond the Call of Duty: A Qualitative Study of Teachers' Additional Responsibilities Related to Sexuality Education

    ERIC Educational Resources Information Center

    Eisenberg, Marla E.; Madsen, Nikki; Oliphant, Jennifer A.; Resnick, Michael

    2011-01-01

    Seven focus groups were conducted with sexuality educators in Minnesota to explore ways that teaching sexuality education differs from teaching other health education content and to determine if additional supports or resources are needed for sexuality educators. Teachers described many specific additional responsibilities or concerns related to…

  10. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    PubMed Central

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  11. A theoretical study of wave dispersion and thermal conduction for HMX/additive interfaces

    NASA Astrophysics Data System (ADS)

    Long, Yao; Chen, Jun

    2014-04-01

    The wave dispersion rule for non-uniform material is useful for ultrasonic inspection and engine life prediction, and also is key in achieving an understanding of the energy dissipation and thermal conduction properties of solid material. On the basis of linear response theory and molecular dynamics, we derive a set of formulas for calculating the wave dispersion rate of interface systems, and study four kinds of interfaces inside plastic bonded explosives: HMX/{HMX, TATB, F2312, F2313}. (HMX: octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine; TATB: 1,3,5-triamino-2,4,6-trinitrobenzene; F2312, F2313: fluoropolymers). The wave dispersion rate is obtained over a wide frequency range from kHz to PHz. We find that at low frequency, the rate is proportional to the square of the frequency, and at high frequency, the rate couples with the molecular vibration modes at the interface. By using the results, the thermal conductivities of HMX/additive interfaces are derived, and a physical model is built for describing the total thermal conductivity of mixture explosives, including HMX multi-particle systems and {TATB, F2312, F2313}-coated HMX.

  12. Theoretical study of addition reactions of carbene, silylene, and germylene to carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Chu, Ying-Ying; Su, Ming-Der

    2004-08-01

    A theoretical study of the mechanism of the reaction of a single-walled carbon nanotube (SWCNT) with carbene (H 2C), silylene (H 2Si), and germylene (H 2Ge) has been carried out using a two-layered ONIOM(B3LYP/6-311G ∗:PM3) approach. The main findings are as follows: (1) The computational results based on the method used in this work are in good agreement with recent theoretical findings [Angew. Chem. Int. Ed. 41 (2002) 1853]. That is, SWCNTs with H 2C, H 2Si, and H 2Ge addends favor opened structures rather than three-membered rings. (2) The greater the atomic number of the carbene center, the larger the activation energy and the less exothermic (or the more endothermic) the cycloaddition reaction becomes. Therefore, addition to the C dbnd C bond of a SWCNT is more difficult the heavier the carbene center. (3) The theoretical observations suggest that the singlet-triplet splitting of a carbene can be used as a guide to its reactivity during the SWCNT cycloaddition process.

  13. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  14. Contrastive studies of potential energy functions of some diatomic molecules

    NASA Astrophysics Data System (ADS)

    Abdallah, Hassan H.; Abdullah, Hewa Y.

    2016-03-01

    It was proposed that iron hydride, FeH, would be formed only on grains at the clouds through the reaction of the adsorbed H atoms or H2 molecules with the adsorbed Fe atoms on the grains. The importance of FeH in Astrophysics presents an additional motivation to study its energetic, spectroscopic constants and Potential Energy Curves. The structural optimization for ground state of FeH was calculated by different theoretical methods, namely, Hartree-Fock (HF), the density functional theory (DFT), B3LYP, MP2 method and QCISD(T) methods and compared with available data from the literature. The single ionized forms, cation and anion, were also obtained at the same level of calculations. Charges, dipole moment, geometrical parameters, molecular orbital energies and spectroscopic parameters were calculated and reported. In addition, the molecular ionization potential, electron affinity and dissociation energy were investigated.

  15. A digital process for additive manufacturing of occlusal splints: a clinical pilot study.

    PubMed

    Salmi, Mika; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Ingman, Tuula; Mäkitie, Antti

    2013-07-01

    The aim of this study was to develop and evaluate a digital process for manufacturing of occlusal splints. An alginate impression was taken from the upper and lower jaws of a patient with temporomandibular disorder owing to cross bite and wear of the teeth, and then digitized using a table laser scanner. The scanned model was repaired using the 3Data Expert software, and a splint was designed with the Viscam RP software. A splint was manufactured from a biocompatible liquid photopolymer by stereolithography. The system employed in the process was SLA 350. The splint was worn nightly for six months. The patient adapted to the splint well and found it comfortable to use. The splint relieved tension in the patient's bite muscles. No sign of tooth wear or significant splint wear was detected after six months of testing. Modern digital technology enables us to manufacture clinically functional occlusal splints, which might reduce costs, dental technician working time and chair-side time. Maximum-dimensional errors of approximately 1 mm were found at thin walls and sharp corners of the splint when compared with the digital model. PMID:23614943

  16. A digital process for additive manufacturing of occlusal splints: a clinical pilot study

    PubMed Central

    Salmi, Mika; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Ingman, Tuula; Mäkitie, Antti

    2013-01-01

    The aim of this study was to develop and evaluate a digital process for manufacturing of occlusal splints. An alginate impression was taken from the upper and lower jaws of a patient with temporomandibular disorder owing to cross bite and wear of the teeth, and then digitized using a table laser scanner. The scanned model was repaired using the 3Data Expert software, and a splint was designed with the Viscam RP software. A splint was manufactured from a biocompatible liquid photopolymer by stereolithography. The system employed in the process was SLA 350. The splint was worn nightly for six months. The patient adapted to the splint well and found it comfortable to use. The splint relieved tension in the patient's bite muscles. No sign of tooth wear or significant splint wear was detected after six months of testing. Modern digital technology enables us to manufacture clinically functional occlusal splints, which might reduce costs, dental technician working time and chair-side time. Maximum-dimensional errors of approximately 1 mm were found at thin walls and sharp corners of the splint when compared with the digital model. PMID:23614943

  17. Prefrontal cortex activity during motor tasks with additional mental load requiring attentional demand: a near-infrared spectroscopy study.

    PubMed

    Mandrick, Kevin; Derosiere, Gérard; Dray, Gérard; Coulon, Denis; Micallef, Jean-Paul; Perrey, Stéphane

    2013-07-01

    Functional near-infrared spectroscopy (fNIRS) is suitable for investigating cerebral oxygenation changes during motor and/or mental tasks. In the present study, we investigated how an additional mental load during a motor task at two submaximal loadings affects the fNIRS-measured brain activation over the right prefrontal cortex (PFC). Fifteen healthy males performed isometric grasping contractions at 15% and 30% of the maximal voluntary contraction (MVC) with or without an additional mental (i.e., arithmetic) task. Mental performance, force variability, fNIRS and subjective perception responses were measured in each condition. The performance of the mental task decreased significantly while the force variability increased significantly at 30% MVC as compared to 15% MVC, suggesting that performance of dual-task required more attentional resources. PFC activity increased significantly as the effort increased from 15% to 30% MVC (p<.001). Although a larger change in the deoxyhemoglobin was observed in dual-task conditions (p=.051), PFC activity did not change significantly as compared to the motor tasks alone. In summary, participants were unable to invest more attention and effort in performing the more difficult levels in order to maintain adequate mental performance. PMID:23665138

  18. l-carnitine as a Potential Additive in Blood Storage Solutions: A Study on Erythrocytes.

    PubMed

    Soumya, R; Carl, H; Vani, R

    2016-09-01

    Erythrocytes undergo various changes during storage (storage lesion) that in turn reduces their functioning and survival. Oxidative stress plays a major role in the storage lesion and antioxidants can be used to combat this stress. This study elucidates the effects of l-carnitine (LC) on erythrocytes of stored blood. Blood was obtained from male Wistar rats and stored (4 °C) for 20 days in CPDA-1 (citrate phosphate dextrose adenine) solution. Samples were divided into-(i) controls (ii) LC 10 (l-carnitine at a concentration of 10 mM) (iii) LC 30 (l-carnitine at a concentration of 30 mM) and (iv) LC 60 (l-carnitine at a concentration of 60 mM). Every fifth day, the biomarkers (haemoglobin, hemolysis, antioxidant enzymes, lipid peroxidation and protein oxidation products) were analysed in erythrocytes. Hemoglobin and protein sulfhydryls were insignificant during storage indicative of the maintenance of hemoglobin and sulfhydryls in all groups. Superoxide dismutase and malondialdehyde levels increased initially and decreased towards the end of storage. The levels of catalase and glutathione peroxidase were lower in experimentals than controls during storage. l-carnitine assisted the enzymes by scavenging the reactive oxygen species produced. Hemolysis increased in all groups with storage, elucidating that l-carnitine could not completely protect lipids and proteins from oxidative stress. Hence, this study opens up new avenues of using l-carnitine as a component of storage solutions with combinations of antioxidants in order to maintain efficacy of erythrocytes. PMID:27429526

  19. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    PubMed

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. PMID:27211646

  20. ALUM ADDITION AND STEP-FEED STUDIES IN OXYGEN-ACTIVATED SLUDGE

    EPA Science Inventory

    A plug flow, O2-activated sludge process was operated with alum addition to remove phosphorus and with lime addition to prevent the process pH from decreasing below 6.4. The O2 reactor was operated at F/M ratios between 0.18 to 0.24 gm of BOD5/gm of MLVSS/day in a typical co-curr...

  1. Chemostat Studies of TCE-Dehalogenating Anaerobic Consortia under Excess and Limited Electron Donor Addition

    NASA Astrophysics Data System (ADS)

    Semprini, L.; Azizian, M.; Green, J.; Mayer-Blackwell, K.; Spormann, A. M.

    2015-12-01

    Two cultures - the Victoria Strain (VS) and the Evanite Strain (EV), enriched with the organohalide respiring bacteria Dehalococcoides mccartyi - were grown in chemostats for more than 4 years at a mean cell residence time of 50 days. The slow doubling rate represents growth likely experienced in the subsurface. The chemostats were fed formate as an electron donor and trichloroethene (TCE) as the terminal electron acceptor. Under excess formate conditions, stable operation was observed with respect to TCE transformation, steady-state hydrogen (H2) concentrations (40 nM), and the structure of the dehalogenating community. Both cultures completely transformed TCE to ethene, with minor amounts of vinyl chloride (VC) observed, along with acetate formation. When formate was limited, TCE was transformed incompletely to ethene (40-60%) and VC (60- 40%), and H2 concentrations ranged from 1 to 3 nM. The acetate concentration dropped below detection. Batch kinetic studies of TCE transformation with chemostat harvested cells found transformation rates of c-DCE and VC were greatly reduced when the cells were grown with limited formate. Upon increasing formate addition to the chemostats, from limited to excess, essentially complete transformation of TCE to ethene was achieved. The increase in formate was associated with an increase in H2 concentration and the production of acetate. Results of batch kinetic tests showed increases in transformation rates for TCE and c-DCE by factors of 3.5 and 2.5, respectively, while VC rates increased by factors of 33 to 500, over a six month period. Molecular analysis of chemostat samples is being performed to quantify the changes in copy numbers of reductase genes and to determine whether shifts in the strains of Dehalococcoides mccartyi where responsible for the observed rate increases. The results demonstrate the importance of electron donor supply for successful in-situ remediation.

  2. Electronic states of aryl radical functionalized graphenes: Density functional theory study

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto; Kawabata, Hiroshi

    2016-06-01

    Functionalized graphenes are known as a high-performance molecular device. In the present study, the structures and electronic states of the aryl radical functionalized graphene have been investigated by the density functional theory (DFT) method to elucidate the effects of functionalization on the electronic states of graphene (GR). Also, the mechanism of aryl radical reaction with GR was investigated. The benzene, biphenyl, p-terphenyl, and p-quaterphenyl radicals [denoted by (Bz) n (n = 1–4), where n means numbers of benzene rings in aryl radical] were examined as aryl radicals. The DFT calculation of GR–(Bz) n (n = 1–4) showed that the aryl radical binds to the carbon atom of GR, and a C–C single bond was formed. The binding energies of aryl radicals to GR were calculated to be ca. 6.0 kcal mol‑1 at the CAM-B3LYP/6-311G(d,p) level. It was found that the activation barrier exists in the aryl radical addition: the barrier heights were calculated to be 10.0 kcal mol‑1. The electronic states of GR–(Bz) n were examined on the basis of theoretical results.

  3. A study of the electrochemistry of nickel hydroxide electrodes with various additives

    NASA Astrophysics Data System (ADS)

    Zhu, Wen-Hua; Ke, Jia-Jun; Yu, Hong-Mei; Zhang, Deng-Jun

    Nickel composite electrodes (NCE) with various additives are prepared by a chemical impregnation method from nitrate solutions on sintered porous plaques. The electrochemical properties, such as utilization of active material, swelling and the discharge potential of the nickel oxide electrode (NOE) are determined mainly through the composition of the active material and the characteristics of nickel plaques. Most additives (Mg, Ca, Sr, Ba, Zn, Cd, Co, Li and Al hydroxide) exert effects on the discharge potential and swelling of the NOE. Chemical co-precipitation with the addition of calcium, zinc, magnesium and barium hydroxide increases the discharge potential by more than 20 mV, but that with zinc hydroxide results in an obvious decrease of active-material utilization and that with calcium and magnesium hydroxide produces a larger increase of electrode thickness. The effects of anion additives are also examined. Less than 1% mol of NiS in the active material increases the discharge potential. Cadmium, cobalt and zinc hydroxide are excellent additives for preventing swelling of the NCE. Slow voltammetry (0.2 mV s -1) in 6 M KOH is applied to characterize the oxygen-evolving potential of the NCE. The difference between the oxygen-evolution potential and the potential of the oxidation peak for the NCE with additives of calcium, lithium, barium and aluminium hydroxide is at least + 60 mV.

  4. Functional Neuroimaging Studies of Written Sentence Comprehension

    ERIC Educational Resources Information Center

    Caplan, David

    2004-01-01

    Sentences convey relationships between the meanings of words, such as who is accomplishing an action or receiving it. Functional neuroimaging based on positron-emission tomography and functional magnetic resonance imaging has been used to identify areas of the brain involved in structuring sentences and determining aspects of meaning associated…

  5. 78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... Guidance for Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in Feeds... HUMAN SERVICES Food and Drug Administration Guidance for Industry: Studies To Evaluate the Utility of Anti- Salmonella Chemical Food Additives in Feeds; Request for Comments AGENCY: Food and...

  6. Infrared Imaging System for Studying Brain Function

    NASA Technical Reports Server (NTRS)

    Mintz, Frederick; Mintz, Frederick; Gunapala, Sarath

    2007-01-01

    A proposed special-purpose infrared imaging system would be a compact, portable, less-expensive alternative to functional magnetic resonance imaging (fMRI) systems heretofore used to study brain function. Whereas a typical fMRI system fills a large room, and must be magnetically isolated, this system would fit into a bicycle helmet. The system would include an assembly that would be mounted inside the padding in a modified bicycle helmet or other suitable headgear. The assembly would include newly designed infrared photodetectors and data-acquisition circuits on integrated-circuit chips on low-thermal-conductivity supports in evacuated housings (see figure) arranged in multiple rows and columns that would define image coordinates. Each housing would be spring-loaded against the wearer s head. The chips would be cooled by a small Stirling Engine mounted contiguous to, but thermally isolated from, the portions of the assembly in thermal contact with the wearer s head. Flexible wires or cables for transmitting data from the aforementioned chips would be routed to an integrated, multichannel transmitter and thence through the top of the assembly to a patch antenna on the outside of the helmet. The multiple streams of data from the infrared-detector chips would be sent to a remote site, where they would be processed, by software, into a three-dimensional display of evoked potentials that would represent firing neuronal bundles and thereby indicate locations of neuronal activity associated with mental or physical activity. The 3D images will be analogous to current fMRI images. The data would also be made available, in real-time, for comparison with data in local or internationally accessible relational databases that already exist in universities and research centers. Hence, this system could be used in research on, and for the diagnosis of response from the wearer s brain to physiological, psychological, and environmental changes in real time. The images would also be

  7. The functional O-mannose glycan on α-dystroglycan contains a phospho-ribitol primed for matriglycan addition.

    PubMed

    Praissman, Jeremy L; Willer, Tobias; Sheikh, M Osman; Toi, Ants; Chitayat, David; Lin, Yung-Yao; Lee, Hane; Stalnaker, Stephanie H; Wang, Shuo; Prabhakar, Pradeep Kumar; Nelson, Stanley F; Stemple, Derek L; Moore, Steven A; Moremen, Kelley W; Campbell, Kevin P; Wells, Lance

    2016-01-01

    Multiple glycosyltransferases are essential for the proper modification of alpha-dystroglycan, as mutations in the encoding genes cause congenital/limb-girdle muscular dystrophies. Here we elucidate further the structure of an O-mannose-initiated glycan on alpha-dystroglycan that is required to generate its extracellular matrix-binding polysaccharide. This functional glycan contains a novel ribitol structure that links a phosphotrisaccharide to xylose. ISPD is a CDP-ribitol (ribose) pyrophosphorylase that generates the reduced sugar nucleotide for the insertion of ribitol in a phosphodiester linkage to the glycoprotein. TMEM5 is a UDP-xylosyl transferase that elaborates the structure. We demonstrate in a zebrafish model as well as in a human patient that defects in TMEM5 result in muscular dystrophy in combination with abnormal brain development. Thus, we propose a novel structure-a ribitol in a phosphodiester linkage-for the moiety on which TMEM5, B4GAT1, and LARGE act to generate the functional receptor for ECM proteins having LG domains. PMID:27130732

  8. The functional O-mannose glycan on α-dystroglycan contains a phospho-ribitol primed for matriglycan addition

    PubMed Central

    Praissman, Jeremy L; Willer, Tobias; Sheikh, M Osman; Toi, Ants; Chitayat, David; Lin, Yung-Yao; Lee, Hane; Stalnaker, Stephanie H; Wang, Shuo; Prabhakar, Pradeep Kumar; Nelson, Stanley F; Stemple, Derek L; Moore, Steven A; Moremen, Kelley W; Campbell, Kevin P; Wells, Lance

    2016-01-01

    Multiple glycosyltransferases are essential for the proper modification of alpha-dystroglycan, as mutations in the encoding genes cause congenital/limb-girdle muscular dystrophies. Here we elucidate further the structure of an O-mannose-initiated glycan on alpha-dystroglycan that is required to generate its extracellular matrix-binding polysaccharide. This functional glycan contains a novel ribitol structure that links a phosphotrisaccharide to xylose. ISPD is a CDP-ribitol (ribose) pyrophosphorylase that generates the reduced sugar nucleotide for the insertion of ribitol in a phosphodiester linkage to the glycoprotein. TMEM5 is a UDP-xylosyl transferase that elaborates the structure. We demonstrate in a zebrafish model as well as in a human patient that defects in TMEM5 result in muscular dystrophy in combination with abnormal brain development. Thus, we propose a novel structure—a ribitol in a phosphodiester linkage—for the moiety on which TMEM5, B4GAT1, and LARGE act to generate the functional receptor for ECM proteins having LG domains. DOI: http://dx.doi.org/10.7554/eLife.14473.001 PMID:27130732

  9. On the fast evaluation of three-center nuclear attraction integrals using one-range addition theorems for Slater functions

    NASA Astrophysics Data System (ADS)

    Seçkin Görgün, Nurşen

    2013-06-01

    Using one-range addition theorems, the three-center nuclear attraction integrals are expressed through the overlap integrals containing χ - and χ α -Slater-type orbitals (χ -STOs and χ α -STOs), where - ∞ < α ⩽ 2 and \\chi _{nlm}^\\alpha \\left( {\\zeta ,\\vec r} \\right) = \\frac{1}{{\\left( {2\\zeta r} \\right)^\\alpha }}\\chi _{nlm} \\left( {\\zeta ,\\vec r} \\right) . For the fast calculation, the partial summation is utilized for some indices of series expansion relations which correspond to progressively increasing upper limits. The binomial coefficients are stored in the memory of the computer. The convergence and accuracy of series are tested by calculating concrete cases. The best values are obtained for α = 0 .

  10. Maltreated children's representations of mother and an additional caregiver: a longitudinal study.

    PubMed

    Manashko, Shany; Besser, Avi; Priel, Beatriz

    2009-04-01

    In the current longitudinal investigation, we explored the continuity of and changes in the mental representations of the mother and an additional caregiver among forty-five 9- to 11-year-old children who had been severely maltreated and subsequently placed in long-term residential care as well as the relationships between the content and structure of these representations and teacher's assessments of the child's externalizing and internalizing symptoms. At Time 1, a nonmaltreated comparison group was assessed concomitantly. Compared to nonmaltreated children, maltreated children scored higher for externalizing and internalizing symptoms, and their maternal representations were found to be significantly less benevolent and integrated and more punitive. In addition, among the maltreated children, the additional caregiver representations were found to be more benevolent and integrated, and less punitive, than the maternal representations. After 30 months, the maltreated children's levels of externalizing and internalizing symptoms diminished, their maternal representations become more benevolent and less punitive, and the additional caregiver representations became less benevolent. Moreover, the Benevolence of the additional caregiver representation was found to predict these children's changes in externalizing symptoms beyond the effects of their symptomatology and its associations with the Benevolence of these representations at Time 1. PMID:19220720

  11. Function-Biased Choice of Additives for Optimization of Protein Crystallization: The Case of the Putative Thioesterase PA5185 from Pseudomonas aeruginosa PAO1

    SciTech Connect

    Chruszcz, Maksymilian; Zimmerman, Matthew D.; Wang, Shuren; Koclega, Katarzyna D.; Zheng, Heping; Evdokimova, Elena; Kudritska, Marina; Cymborowski, Marcin; Savchenko, Alexei; Edwards, Aled; Minor, Wladek

    2009-09-15

    The crystal structure of PA5185, a putative thioesterase from Pseudomonas aeruginosa strain PAO1, was solved using multi-wavelength anomalous diffraction to 2.4 {angstrom}. Analysis of the structure and information about the putative function of the protein were used to optimize crystallization conditions. The crystal growth was optimized by applying additives with chemical similarity to a fragment of a putative PA5185 substrate (CoA or its derivative). Using new crystallization conditions containing this function-biased set of additives, several new crystal forms were produced, and structures of three of them (in three different space groups) were determined. One of the new crystal forms had an improved resolution limit of 1.9 {angstrom}, and another displayed an alternative conformation of the highly conserved loop containing Asn26, which could play a physiological role. Surprisingly, none of the additives were ordered in the crystal structures. Application of function-biased additives could be used as a standard optimization protocol for producing improved diffraction, or new crystal forms, which may lead to better understanding of the biological functions of proteins.

  12. Basic-functionalized recyclable ionic liquid catalyst: A solvent-free approach for Michael addition of 1,3-dicarbonyl compounds to nitroalkenes under ultrasound irradiation.

    PubMed

    Narayanaperumal, Senthil; da Silva, Rodrigo César; Feu, Karla Santos; de la Torre, Alexander Fernández; Corrêa, Arlene G; Paixão, Márcio Weber

    2013-05-01

    A task-specific ionic liquid (TSIL) has been introduced as a recyclable catalyst in Michael addition. A series of nitroalkenes and various C-based nucleophiles were reacted in the presence of 30mol% of recyclable basic-functionalized ionic liquid. Good to excellent yields were obtained in 30min under ultrasound irradiation. PMID:23218731

  13. Mechanical characterization of filler sandcretes with rice husk ash additions. Study applied to Senegal

    SciTech Connect

    Cisse, I.K.; Laquerbe, M.

    2000-01-01

    To capitalize on the local materials of Senegal (agricultural and industrial wastes, residual fines from crushing process, sands from dunes, etc.), rise husk ash and residues of industrial and agricultural wastes have been used as additions in sandcretes. The mechanical resistance of sandcrete blocks obtained when unground ash (and notably the ground ash) is added reveals that there is an increase in performance over the classic mortar blocks. In addition, the use of unground rice husk ash enables production of a lightweight sandcrete with insulating properties, at a reduced cost. The ash pozzolanic reactivity explains the high strengths obtained.

  14. Correlation function studies for snow and ice

    NASA Technical Reports Server (NTRS)

    Vallese, F.; Kong, J. A.

    1981-01-01

    The random medium model is used to characterize snow and ice fields in the interpretation of active and passive microwave remote sensing data. A correlation function is used to describe the random permittivity fluctuations with the associated mean and variance and correlation lengths; and several samples are investigated to determine typical correlation functions for snow and ice. It is shown that correlation functions are extracted directly from appropriate ground truth data, and an exponential correlation function is observed for snow and ice with lengths corresponding to the actual size of ice particles or air bubbles. Thus, given that a medium has spatially stationary statistics and a small medium, the random medium model can interpret remote sensing data where theoretical parameters correspond to actual physical parameters of the terrain.

  15. An Alkaline Protease from Bacillus pumilus MP 27: Functional Analysis of Its Binding Model toward Its Applications As Detergent Additive

    PubMed Central

    Baweja, Mehak; Tiwari, Rameshwar; Singh, Puneet K.; Nain, Lata; Shukla, Pratyoosh

    2016-01-01

    A proteolytic strain of Bacillus pumilus MP 27 was isolated from water samples of Southern ocean produced alkaline protease. Since protease production need expensive ingredients, an economically viable process was developed by using low cost carbon source, wheat straw, supplemented with peptone. This protease was active within temperature ranges 10–70°C at pH 9. This process was optimized by response surface methodology using a Box Bekhman design by Design Expert 7.0 software that increased the protease activity to 776.5 U/ml. Moreover, the enzyme was extremely stable at a broad range of temperature and pH retaining 69% of its activity at 50°C and 70% at pH 11. The enzyme exhibited excellent compatibility with surfactants and commercial detergents, showing 87% stability with triton X-100 and 100% stability with Tide commercial detergent. The results of the wash performance analysis demonstrated considerably good de-staining at 50 and 4°C with low supplementation (109 U/ml). Molecular modeling of the protease revealed the presence of serine proteases, subtilase family and serine active site and further docking supported the association of catalytic site with the various substrates. Certainly, such protease can be considered as a good detergent additive in detergent industry with a possibility to remove the stains effectively even in a cold wash. PMID:27536284

  16. An Alkaline Protease from Bacillus pumilus MP 27: Functional Analysis of Its Binding Model toward Its Applications As Detergent Additive.

    PubMed

    Baweja, Mehak; Tiwari, Rameshwar; Singh, Puneet K; Nain, Lata; Shukla, Pratyoosh

    2016-01-01

    A proteolytic strain of Bacillus pumilus MP 27 was isolated from water samples of Southern ocean produced alkaline protease. Since protease production need expensive ingredients, an economically viable process was developed by using low cost carbon source, wheat straw, supplemented with peptone. This protease was active within temperature ranges 10-70°C at pH 9. This process was optimized by response surface methodology using a Box Bekhman design by Design Expert 7.0 software that increased the protease activity to 776.5 U/ml. Moreover, the enzyme was extremely stable at a broad range of temperature and pH retaining 69% of its activity at 50°C and 70% at pH 11. The enzyme exhibited excellent compatibility with surfactants and commercial detergents, showing 87% stability with triton X-100 and 100% stability with Tide commercial detergent. The results of the wash performance analysis demonstrated considerably good de-staining at 50 and 4°C with low supplementation (109 U/ml). Molecular modeling of the protease revealed the presence of serine proteases, subtilase family and serine active site and further docking supported the association of catalytic site with the various substrates. Certainly, such protease can be considered as a good detergent additive in detergent industry with a possibility to remove the stains effectively even in a cold wash. PMID:27536284

  17. Design and analysis of a piezoelectric material based touch screen with additional pressure and its acceleration measurement functions

    NASA Astrophysics Data System (ADS)

    Chu, Xiang-Cheng; Liu, Jia-Yi; Gao, Ren-Long; Chang, Jie; Li, Long-Tu

    2013-12-01

    Touch screens are becoming more and more prevalent in everyday environments due to their convenience and humanized operation. In this paper, a piezoelectric material based touch screen is developed and investigated. Piezoelectric ceramics arrayed under the touch panel at the edges or corners are used as tactile sensors to measure the touch positioning point similarly to conventional touch screens. However, additional touch pressure and its acceleration performance can also be obtained to obtain a higher-level human-machine interface. The piezoelectric ceramics can also be added to a traditional touch screen structure, or they can be used independently to construct a novel touch screen with a high light transmittance approach to a transparent glass. The piezoelectric ceramics were processed from PZT piezoelectric ceramic powder into a round or rectangular shape. According to the varied touch position and physical press strength of a finger, or even a gloved hand or fingernail, the piezoelectric tactile sensors will have different output voltage responses. By calculating the ratio of different piezoelectric tactile sensors’ responses and summing up all piezoelectric tactile sensors’ output voltages, the touch point position, touch pressure and touch force acceleration can be detected. A prototype of such a touch screen is manufactured and its position accuracy, touch pressure and response speed are measured in detail. The experimental results show that the prototype has many advantages such as high light transmittance, low energy cost and high durability.

  18. Quantifying Wetland Functions: A Case Study

    NASA Astrophysics Data System (ADS)

    Potter, K. W.; Rogers, J. S.; Hoffman, A. R.; Wu, C.; Hoopes, J. A.; Armstrong, D. E.

    2007-05-01

    Wetlands are reputed to reduce peak flows and improve water quality by trapping sediment and phosphorus. However, there are relatively few studies that quantify these wetland functions. This paper reports on a study of a 45-hectare wetland in southern Wisconsin. The wetland is traversed by a stream channel that drains a predominantly agricultural 17.4 km2 watershed. During the spring and summer of 2006, we collected stage data and water samples at stations upstream and downstream of the wetland, with the former accounting for 82% of the contributing area. Continuous measurements of water stage at these stations were used to construct a streamflow record. During storm events water samples were taken automatically at 2-hour intervals for the first 12 samples and 8-hour intervals for the next 12 samples. Samples were analyzed for total suspended solids, total phosphorus, and dissolved reactive phosphorus. Ten events were observed during the observation period; the two largest events were 1 to 2-year storms. One-dimensional unsteady flow routing was used to estimate the maximum extent of wetland inundation for each event. When normalized for flow volume, all peak flows were attenuated by the wetland, with the maximum attenuation corresponding to the intermediate events. The reduced attenuation of the larger events appears to be due to filling of storage, either due to antecedent conditions or the event itself. In the case of sediment, the amount leaving the wetland in the two largest storms, which accounted for 96% of the exported sediment during the period of observation, was twice the amount entering the wetland. The failure of the wetland to trap sediment is apparently due to the role of drainage ditches, which trap sediment during the wetland-filling phase and release it during drainage. The export of sediment during the largest events appears to result from remobilization of sediment deposited in the low-gradient stream channel during smaller events. This

  19. A study on the quantitative evaluation of skin barrier function

    NASA Astrophysics Data System (ADS)

    Maruyama, Tomomi; Kabetani, Yasuhiro; Kido, Michiko; Yamada, Kenji; Oikaze, Hirotoshi; Takechi, Yohei; Furuta, Tomotaka; Ishii, Shoichi; Katayama, Haruna; Jeong, Hieyong; Ohno, Yuko

    2015-03-01

    We propose a quantitative evaluation method of skin barrier function using Optical Coherence Microscopy system (OCM system) with coherency of near-infrared light. There are a lot of skin problems such as itching, irritation and so on. It has been recognized skin problems are caused by impairment of skin barrier function, which prevents damage from various external stimuli and loss of water. To evaluate skin barrier function, it is a common strategy that they observe skin surface and ask patients about their skin condition. The methods are subjective judgements and they are influenced by difference of experience of persons. Furthermore, microscopy has been used to observe inner structure of the skin in detail, and in vitro measurements like microscopy requires tissue sampling. On the other hand, it is necessary to assess objectively skin barrier function by quantitative evaluation method. In addition, non-invasive and nondestructive measuring method and examination changes over time are needed. Therefore, in vivo measurements are crucial for evaluating skin barrier function. In this study, we evaluate changes of stratum corneum structure which is important for evaluating skin barrier function by comparing water-penetrated skin with normal skin using a system with coherency of near-infrared light. Proposed method can obtain in vivo 3D images of inner structure of body tissue, which is non-invasive and non-destructive measuring method. We formulate changes of skin ultrastructure after water penetration. Finally, we evaluate the limit of performance of the OCM system in this work in order to discuss how to improve the OCM system.

  20. Developing a Framework for Ankle Function: A Delphi Study

    PubMed Central

    Snyder, Kelli R.; Evans, Todd A.; Neibert, Peter J.

    2014-01-01

    Context: Addressing clinical outcomes is paramount to providing effective health care, yet there is no consensus regarding the appropriate outcomes to address after ankle injuries. Compounding the problem is the repetitive nature of lateral ankle sprains, referred to as functional (FAI) or chronic (CAI) ankle instability. Although they are commonly used terms in practice and research, FAI and CAI are inconsistently defined and assessed. Objective: To establish definitions of a healthy/normal/noninjured ankle, FAI, and CAI, as well as their characteristics and assessment techniques. Design: Delphi study. Setting: Telephone interviews and electronic surveys. Patients or Other Participants: Sixteen experts representing the fields of ankle function and treatment, ankle research, and outcomes assessment and research were selected as panelists. Data Collection and Analysis: A telephone interview produced feedback regarding the definition of, functional characteristics of, and assessment techniques for a healthy/normal/noninjured ankle, an unhealthy/acutely injured ankle, and FAI/CAI. Those data were compiled, reduced, and returned through electronic surveys and were either included by reaching consensus (80% agreement) or excluded. Results: The definitions of a healthy/normal/noninjured ankle and FAI reached consensus. Experts did not agree on a definition of CAI. Eleven functional characteristics of a healthy/normal/noninjured ankle, 32 functional characteristics of an unhealthy/acutely injured ankle, and 13 characteristics of FAI were agreed upon. Conclusions: Although a consensus was reached regarding the definitions and functional characteristics of a healthy/normal/noninjured ankle and FAI, the experts could only agree on 1 characteristic to include in the FAI definition. Several experts did, however, provide additional comments that reinforced the differences in the interpretation of those concepts. Although the experts could not agree on the definition of CAI, its

  1. Neurobehavioral deficits in Persian Gulf veterans: additional evidence from a population-based study.

    PubMed

    Storzbach, D; Rohlman, D S; Anger, W K; Binder, L M; Campbell, K A

    2001-01-01

    Reports of low-concentration nerve gas exposures during the Gulf War (GW) have spurred concern about possible health consequences and symptoms reported by many returning veterans. The Portland Environmental Hazards Research Center is studying veterans from the northwest United States who report persistent, unexplained "Gulf War" symptoms (cases) and those who do not report those symptoms (controls). An epidemiological survey focused on exposures and symptoms was mailed to a random sample of GW veterans from Oregon and southwestern Washington. Volunteers recruited from survey respondents agreed to undergo a thorough medical examination and psychological and neurobehavioral assessment. Persistent symptoms with no medical explanation associated with Persian Gulf service (e.g., fatigue, muscle pain, memory deficits) beginning during or after the war qualified respondents as cases. The 239 cases with unexplained symptoms and the 112 controls without symptoms were administered a computerized assessment battery of 12 psychosocial and 6 neurobehavioral tests. Replicating and extending previous interim findings, a subgroup of veterans emerged from the initial analysis in the form of extreme outliers which produced a visually and quantitatively obvious bimodal distribution. This led, as it had previously, to analyses of the outliers as a separate group (labeled "slow ODTP"), which confirmed the initial findings of neurobehavioral differences between the outliers and the other cases and controls and provided more convincing evidence that the majority of cases who report neurobehavioral symptoms have no objective evidence of neurobehavioral deficits. However, the larger group of symptomatic veterans do have highly significant and compelling evidence of psychological distress based on scores from 11 separate psychological tests. Whereas the cases differed from the controls by poorer neurobehavioral test performance, extraction of the slow ODTP participants (almost all cases

  2. Study on automatic optical element addition or deletion in lens optimization

    NASA Astrophysics Data System (ADS)

    Cheng, Xuemin; Wang, Yongtian; Hao, Qun

    2002-09-01

    Two lens form parameters, quantifying the symmetry of the optical system and the optical power distribution among the individual lens elements, are used as the criteria for automatic element addition or deletion in lens optimization. The scheme based on the criteria is described in this paper. Design examples are provided, which demonstrate that the scheme is practicable.

  3. Teaching Young Children Decomposition Strategies to Solve Addition Problems: An Experimental Study

    ERIC Educational Resources Information Center

    Cheng, Zi-Juan

    2012-01-01

    The ability to count has traditionally been considered an important milestone in children's development of number sense. However, using counting (e.g., counting on, counting all) strategies to solve addition problems is not the best way for children to achieve their full mathematical potential and to prepare them to develop more complex and…

  4. Vector generalized additive models for extreme rainfall data analysis (study case rainfall data in Indramayu)

    NASA Astrophysics Data System (ADS)

    Utami, Eka Putri Nur; Wigena, Aji Hamim; Djuraidah, Anik

    2016-02-01

    Rainfall pattern are good indicators for potential disasters. Global Circulation Model (GCM) contains global scale information that can be used to predict the rainfall data. Statistical downscaling (SD) utilizes the global scale information to make inferences in the local scale. Essentially, SD can be used to predict local scale variables based on global scale variables. SD requires a method to accommodate non linear effects and extreme values. Extreme value Theory (EVT) can be used to analyze the extreme value. One of methods to identify the extreme events is peak over threshold that follows Generalized Pareto Distribution (GPD). The vector generalized additive model (VGAM) is an extension of the generalized additive model. It is able to accommodate linear or nonlinear effects by involving more than one additive predictors. The advantage of VGAM is to handle multi response models. The key idea of VGAM are iteratively reweighted least square for maximum likelihood estimation, penalized smoothing, fisher scoring and additive models. This works aims to analyze extreme rainfall data in Indramayu using VGAM. The results show that the VGAM with GPD is able to predict extreme rainfall data accurately. The prediction in February is very close to the actual value at quantile 75.

  5. Studies on the Food Additive Propyl Gallate: Synthesis, Structural Characterization, and Evaluation of the Antioxidant Activity

    ERIC Educational Resources Information Center

    Garrido, Jorge; Garrido, E. Manuela; Borges, Fernanda

    2012-01-01

    Antioxidants are additives largely used in industry for delaying, retarding, or preventing the development of oxidative deterioration. Propyl gallate (E310) is a phenolic antioxidant extensively used in the food, cosmetics, and pharmaceutical industries. A series of lab experiments have been developed to teach students about the importance and…

  6. Effect of COOH-functionalized SWCNT addition on the electrical and photovoltaic characteristics of Malachite Green dye based photovoltaic cells

    NASA Astrophysics Data System (ADS)

    Chakraborty, S.; Manik, N. B.

    2014-12-01

    We report the effect of COOH-functionalized single walled carbon nanotubes (COOH-SWCNT) on the electrical and photovoltaic characteristics of Malachite Green (MG) dye based photovoltaic cells. Two different types of photovoltaic cells were prepared, one with MG dye and another by incorporating COOH-SWCNT with this dye. Cells were characterized through different electrical and photovoltaic measurements including photocurrent measurements with pulsed radiation. From the dark current—voltage (I-V) characteristic results, we observed a certain transition voltage (Vth) for both the cells beyond which the conduction mechanism of the cells change sharply. For the MG dye, Vth is 3.9 V whereas for COOH-SWCNT mixed with this dye, Vth drops to 2.7 V. The device performance improves due to the incorporation of COOH-SWCNT. The open circuit voltage and short circuit current density change from 4.2 to 97 mV and from 108 to 965 μA/cm2 respectively. Observations from photocurrent measurements show that the rate of growth and decay of the photocurrent are quite faster in the presence of COOH-SWCNT. This observation indicates a faster charge separation processes due to the incorporation of COOH-SWCNT in the MG dye cells. The high aspect ratio of COOH-SWCNT allows efficient conduction pathways for the generated charge carriers.

  7. Suppressing Respiration Effects when Geometric Distortion Is Corrected Dynamically by Phase Labeling for Additional Coordinate Encoding (PLACE) during Functional MRI

    PubMed Central

    Faraji-Dana, Zahra; Tam, Fred; Chen, J. Jean; Graham, Simon J.

    2016-01-01

    Echo planar imaging (EPI) suffers from geometric distortions caused by magnetic field inhomogeneities, which can be time-varying as a result of small amounts of head motion that occur over seconds and minutes during fMRI experiments, also known as “dynamic geometric distortion”. Phase Labeling for Additional Coordinate Encoding (PLACE) is a promising technique for geometric distortion correction without reduced temporal resolution and in principle can be used to correct for motion-induced dynamic geometric distortion. PLACE requires at least two EPI images of the same anatomy that are ideally acquired with no variation in the magnetic field inhomogeneities. However, head motion and lung ventilation during the respiratory cycle can cause changes in magnetic field inhomogeneities within the EPI pair used for PLACE. In this work, we exploited dynamic off-resonance in k-space (DORK) and averaging to correct the within EPI pair magnetic field inhomogeneities; and hence proposed a combined technique (DORK+PLACE+averaging) to mitigate dynamic geometric distortion in EPI-based fMRI while preserving the temporal resolution. The performance of the combined DORK, PLACE and averaging technique was characterized through several imaging experiments involving test phantoms and six healthy adult volunteers. Phantom data illustrate reduced temporal standard deviation of fMRI signal intensities after use of combined dynamic PLACE, DORK and averaging compared to the standard processing and static geometric distortion correction. The combined technique also substantially improved the temporal standard deviation and activation maps obtained from human fMRI data in comparison to the results obtained by standard processing and static geometric distortion correction, highlighting the utility of the approach. PMID:27258194

  8. Functional Genomics in the Study of Mind-Body Therapies

    PubMed Central

    Niles, Halsey; Mehta, Darshan H.; Corrigan, Alexandra A.; Bhasin, Manoj K.; Denninger, John W.

    2014-01-01

    Background Mind-body therapies (MBTs) are used throughout the world in treatment, disease prevention, and health promotion. However, the mechanisms by which MBTs exert their positive effects are not well understood. Investigations into MBTs using functional genomics have revolutionized the understanding of MBT mechanisms and their effects on human physiology. Methods We searched the literature for the effects of MBTs on functional genomics determinants using MEDLINE, supplemented by a manual search of additional journals and a reference list review. Results We reviewed 15 trials that measured global or targeted transcriptomic, epigenomic, or proteomic changes in peripheral blood. Sample sizes ranged from small pilot studies (n=2) to large trials (n=500). While the reliability of individual genes from trial to trial was often inconsistent, genes related to inflammatory response, particularly those involved in the nuclear factor-kappa B (NF-κB) pathway, were consistently downregulated across most studies. Conclusion In general, existing trials focusing on gene expression changes brought about by MBTs have revealed intriguing connections to the immune system through the NF-κB cascade, to telomere maintenance, and to apoptotic regulation. However, these findings are limited to a small number of trials and relatively small sample sizes. More rigorous randomized controlled trials of healthy subjects and specific disease states are warranted. Future research should investigate functional genomics areas both upstream and downstream of MBT-related gene expression changes—from epigenomics to proteomics and metabolomics. PMID:25598735

  9. Ciliobrevins as tools for studying dynein motor function

    PubMed Central

    Roossien, Douglas H.; Miller, Kyle E.; Gallo, Gianluca

    2015-01-01

    Dyneins are a small class of molecular motors that bind to microtubules and walk toward their minus ends. They are essential for the transport and distribution of organelles, signaling complexes and cytoskeletal elements. In addition dyneins generate forces on microtubule arrays that power the beating of cilia and flagella, cell division, migration and growth cone motility. Classical approaches to the study of dynein function in axons involve the depletion of dynein, expression of mutant/truncated forms of the motor, or interference with accessory subunits. By necessity, these approaches require prolonged time periods for the expression or manipulation of cellular dynein levels. With the discovery of the ciliobrevins, a class of cell permeable small molecule inhibitors of dynein, it is now possible to acutely disrupt dynein both globally and locally. In this review, we briefly summarize recent work using ciliobrevins to inhibit dynein and discuss the insights ciliobrevins have provided about dynein function in various cell types with a focus on neurons. We temper this with a discussion of the need for studies that will elucidate the mechanism of action of ciliobrevin and as well as the need for experiments to further analyze the specificity of ciliobreviens for dynein. Although much remains to be learned about ciliobrevins, these small molecules are proving themselves to be valuable novel tools to assess the cellular functions of dynein. PMID:26217180

  10. The functions of language: an experimental study.

    PubMed

    Redhead, Gina; Dunbar, R I M

    2013-01-01

    We test between four separate hypotheses (social gossip, social contracts, mate advertising and factual information exchange) for the function(s) of language using a recall paradigm. Subjects recalled the social content of stories (irrespective of whether this concerned social behavior, defection or romantic events) significantly better than they did ecological information. Recall rates were no better on ecological stories if they involved flamboyant language, suggesting that, if true, Miller's "Scheherazade effect" may not be independent of content. One interpretation of these results might be that language evolved as an all-purpose social tool, and perhaps acquired specialist functions (sexual advertising, contract formation, information exchange) at a later date through conventional evolutionary windows of opportunity. PMID:23945312

  11. A laboratory study of the perceived benefit of additional noise attenuation by houses

    NASA Technical Reports Server (NTRS)

    Flindell, I. H.

    1983-01-01

    Two Experiments were conducted to investigate the perceived benefit of additional house attenuation against aircraft flyover noise. First, subjects made annoyance judgments in a simulated living room while an operative window with real and dummy storm windows was manipulated in full view of those subjects. Second, subjects made annoyance judgments in an anechoic audiometric test chamber of frequency shaped noise signals having spectra closely matched to those of the aircraft flyover noises reproduced in the first experiment. These stimuli represented the aircraft flyover noises in levels and spectra but without the situational and visual cues present in the simulated living room. Perceptual constancy theory implies that annoyance tends to remain constant despite reductions in noise level caused by additional attenuation of which the subjects are fully aware. This theory was supported when account was taken for a reported annoyance overestimation for certain spectra and for a simulated condition cue overreaction.

  12. Enhanced flux pinning in MOCVD-YBCO films through Zr-additions:Systematic feasibility studies

    SciTech Connect

    Aytug, Tolga; Paranthaman, Mariappan Parans; Specht, Eliot D; Kim, Kyunghoon; Zhang, Yifei; Cantoni, Claudia; Zuev, Yuri L; Goyal, Amit; Christen, David K; Maroni, Victor A.

    2009-01-01

    Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

  13. Enhanced flux pinning in MOCVD-YBCO films through Zr additions : systematic feasibility studies.

    SciTech Connect

    Aytug, T.; Paranthaman, M.; Specht, E. D.; Zhang, Y.; Kim, K.; Zuev, Y. L.; Cantoni, C.; Goyal, A.; Christen, D. K.; Maroni, V. A.; Chen, Y.; Selvamanickam, V.; ORNL; SuperPower, Inc.

    2010-01-01

    Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

  14. Indolyne Experimental and Computational Studies: Synthetic Applications and Origins of Selectivities of Nucleophilic Additions

    PubMed Central

    Im, G-Yoon J.; Bronner, Sarah M.; Goetz, Adam E.; Paton, Robert S.; Cheong, Paul H.-Y.; Houk, K. N.; Garg, Neil K.

    2010-01-01

    Efficient syntheses of 4,5-, 5,6-, and 6,7-indolyne precursors beginning from commercially available hydroxyindole derivatives are reported. The synthetic routes are versatile and allow access to indolyne precursors that remain unsubstituted on the pyrrole ring. Indolynes can be generated under mild fluoride-mediated conditions, trapped by a variety of nucleophilic reagents, and used to access a number of novel substituted indoles. Nucleophilic addition reactions to indolynes proceed with varying degrees of regioselectivity; distortion energies control regioselectivity and provide a simple model to predict the regioselectivity in the nucleophilic additions to indolynes and other unsymmetrical arynes. This model has led to the design of a substituted 4,5-indolyne that exhibits enhanced nucleophilic regioselectivity. PMID:21114321

  15. Structural changes in gluten protein structure after addition of emulsifier. A Raman spectroscopy study

    NASA Astrophysics Data System (ADS)

    Ferrer, Evelina G.; Gómez, Analía V.; Añón, María C.; Puppo, María C.

    2011-06-01

    Food protein product, gluten protein, was chemically modified by varying levels of sodium stearoyl lactylate (SSL); and the extent of modifications (secondary and tertiary structures) of this protein was analyzed by using Raman spectroscopy. Analysis of the Amide I band showed an increase in its intensity mainly after the addition of the 0.25% of SSL to wheat flour to produced modified gluten protein, pointing the formation of a more ordered structure. Side chain vibrations also confirmed the observed changes.

  16. A design study for the addition of higher order parametric discrete elements to NASTRAN

    NASA Technical Reports Server (NTRS)

    Stanton, E. L.

    1972-01-01

    The addition of discrete elements to NASTRAN poses significant interface problems with the level 15.1 assembly modules and geometry modules. Potential problems in designing new modules for higher-order parametric discrete elements are reviewed in both areas. An assembly procedure is suggested that separates grid point degrees of freedom on the basis of admissibility. New geometric input data are described that facilitate the definition of surfaces in parametric space.

  17. Load bearing and stiffness tailored NiTi implants produced by additive manufacturing: a simulation study

    NASA Astrophysics Data System (ADS)

    Rahmanian, Rasool; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael; Elahinia, Mohammad

    2014-03-01

    Common metals for stable long-term implants (e.g. stainless steel, Titanium and Titanium alloys) are much stiffer than spongy cancellous and even stiffer than cortical bone. When bone and implant are loaded this stiffness mismatch results in stress shielding and as a consequence, degradation of surrounding bony structure can lead to disassociation of the implant. Due to its lower stiffness and high reversible deformability, which is associated with the superelastic behavior, NiTi is an attractive biomaterial for load bearing implants. However, the stiffness of austenitic Nitinol is closer to that of bone but still too high. Additive manufacturing provides, in addition to the fabrication of patient specific implants, the ability to solve the stiffness mismatch by adding engineered porosity to the implant. This in turn allows for the design of different stiffness profiles in one implant tailored to the physiological load conditions. This work covers a fundamental approach to bring this vision to reality. At first modeling of the mechanical behavior of different scaffold designs are presented as a proof of concept of stiffness tailoring. Based on these results different Nitinol scaffolds can be produced by additive manufacturing.

  18. Magnetic Force Microscopy Study of Zr2Co11 -Based Nanocrystalline Materials: Effect of Mo Addition

    DOE PAGESBeta

    Yue, Lanping; Jin, Yunlong; Zhang, Wenyong; Sellmyer, David J.

    2015-01-01

    Tmore » he addition of Molybdenum was used to modify the nanostructure and enhance coercivity of rare-earth-free Zr2Co11-based nanocrystalline permanent magnets. he effect of Mo addition on magnetic domain structures of melt spun nanocrystalline Zr16Co84-xMox(x=0, 0.5, 1, 1.5, and 2.0) ribbons has been investigated. It was found that magnetic properties and local domain structures are strongly influenced by Mo doping. he coercivity of the samples increases with the increase in Mo content (x≤1.5). he maximum energy product(BH)maxincreases with increasingxfrom 0.5 MGOe forx=0to a maximum value of 4.2 MGOe forx=1.5. he smallest domain size with a relatively short magnetic correlation length of 128 nm and largest root-mean-square phase shiftΦrmsvalue of 0.66° are observed for thex=1.5. he optimal Mo addition promotes magnetic domain structure refinement and thus leads to a significant increase in coercivity and energy product in this sample.« less

  19. Lung Function Measurements in Rodents in Safety Pharmacology Studies

    PubMed Central

    Hoymann, Heinz Gerd

    2012-01-01

    The ICH guideline S7A requires safety pharmacology tests including measurements of pulmonary function. In the first step – as part of the “core battery” – lung function tests in conscious animals are requested. If potential adverse effects raise concern for human safety, these should be explored in a second step as a “follow-up study”. For these two stages of safety pharmacology testing, both non-invasive and invasive techniques are needed which should be as precise and reliable as possible. A short overview of typical in vivo measurement techniques is given, their advantages and disadvantages are discussed and out of these the non-invasive head-out body plethysmography and the invasive but repeatable body plethysmography in orotracheally intubated rodents are presented in detail. For validation purposes the changes in the respective parameters such as tidal midexpiratory flow (EF50) or lung resistance have been recorded in the same animals in typical bronchoconstriction models and compared. In addition, the technique of head-out body plethysmography has been shown to be useful to measure lung function in juvenile rats starting from day two of age. This allows safety pharmacology testing and toxicological studies in juvenile animals as a model for the young developing organism as requested by the regulatory authorities (e.g., EMEA Guideline 1/2008). It is concluded that both invasive and non-invasive pulmonary function tests are capable of detecting effects and alterations on the respiratory system with different selectivity and area of operation. The use of both techniques in a large number of studies in mice and rats in the last years have demonstrated that they provide useful and reliable information on pulmonary mechanics in safety pharmacology and toxicology testing, in investigations of respiratory disorders, and in pharmacological efficacy studies. PMID:22973226

  20. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response. PMID:26615870

  1. Oculomotor studies of cerebellar function in autism.

    PubMed

    Nowinski, Caralynn V; Minshew, Nancy J; Luna, Beatriz; Takarae, Yukari; Sweeney, John A

    2005-11-15

    Histopathological, neuroimaging and genetic findings indicate cerebellar abnormalities in autism, but the extent of neurophysiological dysfunction associated with those findings has not been systematically examined. Suppression of intrusive saccades (square wave jerks) and the ability to sustain eccentric gaze, two phenomena requiring intact cerebellar function, were examined in 52 high-functioning individuals with autism and 52 age- and IQ-matched healthy subjects during visual fixation of static central and peripheral targets. Rates of intrusive saccades were not increased in autism during visual fixation, and foveopetal ocular drift was also not increased when subjects held an eccentric gaze. The absence of gross disturbances of visual fixation associated with cerebellar disease in individuals with autism, such as increased square wave jerk rates and foveopetal drift when holding eccentric gaze, indicates that the functional integrity of cerebellar--brainstem networks devoted to oculomotor control is preserved in autism despite reported anatomic variations. However, increased amplitude of intrusive saccades and reduced latency of target refixation after intrusive saccades were observed in individuals with autism, especially when subjects maintained fixation of remembered target locations without sensory guidance. The atypical metrics of intrusive saccades that were observed may be attributable to faulty functional connectivity in cortico-cerebellar networks. PMID:16214219

  2. Farmers' Functional Literacy Project (Bhimili Study).

    ERIC Educational Resources Information Center

    Rao, D. S.

    1979-01-01

    As part of a farmers' functional literacy project, the Department of Adult and Continuing Education, Andhra University, Waltair (India), investigated a sampling of participant characteristics and their relation to progress in improving literacy skills and learning such aspects of agriculture as animal husbandry, poultry, dairying, and so on. (MF)

  3. Physicochemical and Thermal Properties of Extruded Instant Functional Rice Porridge Powder as Affected by the Addition of Soybean or Mung Bean.

    PubMed

    Mayachiew, Pornpimon; Charunuch, Chulaluck; Devahastin, Sakamon

    2015-12-01

    Legumes contain protein, micronutrients, and bioactive compounds, which provide various health benefits. In this study, soybean or mung bean was mixed in rice flour to produce by extrusion instant functional legume-rice porridge powder. The effects of the type and percentage (10%, 20%, or 30%, w/w) of legumes on the expansion ratio of the extrudates were first evaluated. Amino acid composition, color, and selected physicochemical (bulk density, water absorption index, and water solubility index), thermal (onset temperature, peak temperature, and transition enthalpy), and pasting (peak viscosity, trough viscosity, and final viscosity) properties of the powder were determined. The crystalline structure and formation of amylose-lipid complexes and the total phenolics content (TPC) and antioxidant activity of the powder were also measured. Soybean-blended porridge powder exhibited higher TPC, 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity, ferric reducing antioxidant power, amino acid, and fat contents than the mung bean-blended porridge powder. Incorporating either legume affected the product properties by decreasing the lightness and bulk density, while increasing the greenness and yellowness and the peak temperature and transition enthalpy. Expansion capacity of the extrudates increased with percentage of mung bean in the mixture but decreased as the percentage of soybean increased. Amylose-lipid complexes formation was confirmed by X-ray diffraction analysis results. Addition of soybean or mung bean resulted in significant pasting property changes of the porridge powder. PMID:26523755

  4. Early Additional Immune-Modulators for Mycoplasma pneumoniae Pneumonia in Children: An Observation Study

    PubMed Central

    Lee, Sung-Churl; Rhim, Jung-Woo; Shin, Myung-Seok; Kang, Jin-Han

    2014-01-01

    Background Mycoplasma pneumoniae (MP) pneumonia is a self-limiting disease, but some patients complain of progressive pneumonia, despite of appropriate antibiotic treatment. We aimed to introduce the role of immune-modulators (corticosteroid and/or intravenous immunoglobulin, IVIG) treatment for childhood MP pneumonia based on previous our experiences. Materials and Methods A retrospective case series analysis for 183 children with MP pneumonia was performed. MP pneumonia patients were diagnosed by two Immunoglobulin M (IgM) tests: the micro-particle agglutination method (≥1:40) and the cold agglutination test (≥1:4), and were examined twice at the initial admission and at discharge. Among 183 MP pneumonia patients, 90 patients with persistent fever for over 48 hours after admission or those with severe respiratory symptoms and signs received additional prednisolone (82 patients, 1 mg/kg/day) or intravenous methylprednisolone (8 patients, 5-10 mg/kg/day) with antibiotics. Four patients with aggravated clinical symptoms and chest radiographic findings after corticosteroid treatment received IVIG (1 g/kg/day, 1-2 doses). Results Mean age of 183 patients was 5.5 ± 3.2 years (6 months-15 years), and the male: female ratio was 1.1:1 (96:87). Fifty-seven patients (31%) were seroconverters and 126 seropositive patients showed increased diagnostic IgM antibody titres during admission (over 4 folds). The majority of the patients who received corticosteroids (86/90 cases) showed rapid defervescence within 48 hours with improved clinical symptoms, regardless of the used antibiotics. Also, 4 patients who received additional IVIG improved both clinically and radiographically within 2 days without adverse reaction. Conclusions In the era of macrolide-resistant MP strains, early additional immune-modulator therapy with antibiotics might prevent from the disease progression and reduce the disease morbidity without adverse reaction. PMID:25566403

  5. Strategic Petroleum Reserve (SPR) additional geologic site characterization studies, Bryan Mound Salt Dome, Texas

    SciTech Connect

    Neal, J.T.; Magorian, T.R.; Ahmad, S.

    1994-11-01

    This report revises the original report that was published in 1980. Some of the topics covered in the earlier report were provisional and it is now practicable to reexamine them using new or revised geotechnical data and that obtained from SPR cavern operations, which involves 16 new caverns. Revised structure maps and sections show interpretative differences as compared with the 1980 report and more definition in the dome shape and caprock structural contours, especially a major southeast-northwest trending anomalous zone. The original interpretation was of westward tilt of the dome, this revision shows a tilt to the southeast, consistent with other gravity and seismic data. This interpretation refines the evaluation of additional cavern space, by adding more salt buffer and allowing several more caverns. Additional storage space is constrained on this nearly full dome because of low-lying peripheral wetlands, but 60 MMBBL or more of additional volume could be gained in six or more new caverns. Subsidence values at Bryan Mound are among the lowest in the SPR system, averaging about 11 mm/yr (0.4 in/yr), but measurement and interpretation issues persist, as observed values are about the same as survey measurement accuracy. Periodic flooding is a continuing threat because of the coastal proximity and because peripheral portions of the site are at elevations less than 15 ft. This threat may increase slightly as future subsidence lowers the surface, but the amount is apt to be small. Caprock integrity may be affected by structural features, especially the faulting associated with anomalous zones. Injection wells have not been used extensively at Bryan Mound, but could be a practicable solution to future brine disposal needs. Environmental issues center on the areas of low elevation that are below 15 feet above mean sea level: the coastal proximity and lowland environment combined with the potential for flooding create conditions that require continuing surveillance.

  6. A near-infrared spectroscopic study of young field ultracool dwarfs: additional analysis

    NASA Astrophysics Data System (ADS)

    Allers, K. N.; Liu, M. C.

    We present additional analysis of the classification system presented in \\citet{allers13}. We refer the reader to \\citet{allers13} for a detailed discussion of our near-IR spectral type and gravity classification system. Here, we address questions and comments from participants of the Brown Dwarfs Come of Age meeting. In particular, we examine the effects of binarity and metallicity on our classification system. We also present our classification of Pleiades brown dwarfs using published spectra. Lastly, we determine SpTs and calculate gravity-sensitive indices for the BT-Settl atmospheric models and compare them to observations.

  7. NhaA antiporter functions using 10 helices, and an additional 2 contribute to assembly/stability

    PubMed Central

    Padan, Etana; Danieli, Tsafi; Keren, Yael; Alkoby, Dudu; Masrati, Gal; Haliloglu, Turkan; Ben-Tal, Nir; Rimon, Abraham

    2015-01-01

    The Escherichia coli Na+/H+ antiporter (Ec-NhaA) is the best-characterized of all pH-regulated Na+/H+ exchangers that control cellular Na+ and H+ homeostasis. Ec-NhaA has 12 helices, 2 of which (VI and VII) are absent from other antiporters that share the Ec-NhaA structural fold. This α-hairpin is located in the dimer interface of the Ec-NhaA homodimer together with a β-sheet. Here we examine computationally and experimentally the role of the α-hairpin in the stability, dimerization, transport, and pH regulation of Ec-NhaA. Evolutionary analysis (ConSurf) indicates that the VI–VII helical hairpin is much less conserved than the remaining transmembrane region. Moreover, normal mode analysis also shows that intact NhaA and a variant, deleted of the α-hairpin, share similar dynamics, suggesting that the structure may be dispensable. Thus, two truncated Ec-NhaA mutants were constructed, one deleted of the α-hairpin and another also lacking the β-sheet. The mutants were studied at physiological pH in the membrane and in detergent micelles. The findings demonstrate that the truncated mutants retain significant activity and regulatory properties but are defective in the assembly/stability of the Ec-NhaA dimer. PMID:26417087

  8. NhaA antiporter functions using 10 helices, and an additional 2 contribute to assembly/stability.

    PubMed

    Padan, Etana; Danieli, Tsafi; Keren, Yael; Alkoby, Dudu; Masrati, Gal; Haliloglu, Turkan; Ben-Tal, Nir; Rimon, Abraham

    2015-10-13

    The Escherichia coli Na(+)/H(+) antiporter (Ec-NhaA) is the best-characterized of all pH-regulated Na(+)/H(+) exchangers that control cellular Na(+) and H(+) homeostasis. Ec-NhaA has 12 helices, 2 of which (VI and VII) are absent from other antiporters that share the Ec-NhaA structural fold. This α-hairpin is located in the dimer interface of the Ec-NhaA homodimer together with a β-sheet. Here we examine computationally and experimentally the role of the α-hairpin in the stability, dimerization, transport, and pH regulation of Ec-NhaA. Evolutionary analysis (ConSurf) indicates that the VI-VII helical hairpin is much less conserved than the remaining transmembrane region. Moreover, normal mode analysis also shows that intact NhaA and a variant, deleted of the α-hairpin, share similar dynamics, suggesting that the structure may be dispensable. Thus, two truncated Ec-NhaA mutants were constructed, one deleted of the α-hairpin and another also lacking the β-sheet. The mutants were studied at physiological pH in the membrane and in detergent micelles. The findings demonstrate that the truncated mutants retain significant activity and regulatory properties but are defective in the assembly/stability of the Ec-NhaA dimer. PMID:26417087

  9. The influence of bioaugmentation and biosurfactant addition on bioremediation efficiency of diesel-oil contaminated soil: feasibility during field studies.

    PubMed

    Szulc, Alicja; Ambrożewicz, Damian; Sydow, Mateusz; Ławniczak, Łukasz; Piotrowska-Cyplik, Agnieszka; Marecik, Roman; Chrzanowski, Łukasz

    2014-01-01

    The study focused on assessing the influence of bioaugmentation and addition of rhamnolipids on diesel oil biodegradation efficiency during field studies. Initial laboratory studies (measurement of emitted CO2 and dehydrogenase activity) were carried out in order to select the consortium for bioaugmentation as well as to evaluate the most appropriate concentration of rhamnolipids. The selected consortium consisted of following bacterial taxa: Aeromonas hydrophila, Alcaligenes xylosoxidans, Gordonia sp., Pseudomonas fluorescens, Pseudomonas putida, Rhodococcus equi, Stenotrophomonas maltophilia, Xanthomonas sp. It was established that the application of rhamnolipids at 150 mg/kg of soil was most appropriate in terms of dehydrogenase activity. Based on the obtained results, four treatment methods were designed and tested during 365 days of field studies: I) natural attenuation; II) addition of rhamnolipids; III) bioaugmentation; IV) bioaugmentation and addition of rhamnolipids. It was observed that bioaugmentation contributed to the highest diesel oil biodegradation efficiency, whereas the addition of rhamnolipids did not notably influence the treatment process. PMID:24291585

  10. Using CAVE technology for functional genomics studies.

    PubMed

    Sensen, Christoph W

    2002-01-01

    We have established the first Java 3D-enabled CAVE (CAVE automated virtual environment). The Java application programming interface allows the complete separation of the program development from the program execution, opening new application domains for the CAVE technology. Programs can be developed on any Java-enabled computer platform, including Windows, Macintosh, and Linux workstations, and executed in the CAVE without modification. The introduction of Java, one of the major programming environments for bioinformatics, into the CAVE environment allows the rapid development applications for genome research, especially for the analysis of the spatial and temporal data that are being produced by functional genomics experiments. The CAVE technology will play a major role in the modeling of biological systems that is necessary to understand how these systems are organized and how they function. PMID:12614491

  11. Kaolinite flocculation induced by smectite addition - a transmission X-ray microscopic study.

    PubMed

    Zbik, Marek S; Song, Yen-Fang; Frost, Ray L

    2010-09-01

    The influence of smectite addition on kaolinite suspensions in water was investigated by transmission X-ray microscopy (TXM) and Scanning Electron Microscopy (SEM). Sedimentation test screening was also conducted. Micrographs were processed by the STatistic IMage Analysing (STIMAN) program and structural parameters were calculated. From the results of the sedimentation tests important influences of small smectite additions to about 3wt.% on kaolinite suspension flocculation has been found. In order to determine the reason for this smectite impact on kaolinite suspension, macroscopic behaviour micro-structural examination using Transmission X-ray Microscope (TXM) and SEM has been undertaken. TXM & SEM micrographs of freeze-dried kaolinite-smectite suspensions with up to 20% smectite showed a high degree of orientation of the fabric made of highly oriented particles and greatest density when 3wt.% of smectite was added to the 10wt.% dense kaolinite suspension. In contrast, suspensions containing pure kaolinite do not show such platelet mutual orientation but homogenous network of randomly oriented kaolinite platelets. This suggests that in kaolinite-smectite suspensions, smectite forms highly oriented basic framework into which kaolinite platelets may bond in face to face preferential contacts strengthening structure and allowing them to show plastic behaviour which is cause of platelets orientation. PMID:20621806

  12. Addition of surfactants in ozonated water cleaning for the suppression of functional group formation and particle adhesion on the SiO2 surface

    NASA Astrophysics Data System (ADS)

    Yang, Jahyun; Im, Kyungtaek; Lim, Sangwoo

    2011-04-01

    Various kinds of surfactants were added to a cleaning solution and deionized (DI) water, and their effect on the suppression of organic function group formation and particle adhesion to a SiO2 surface was analyzed using multi-internal reflection Fourier transform infrared spectroscopy. The results implied that attached organic functional groups are affected by the chemical structure of a surfactant in DI water. Furthermore, the addition of anionic glycolic acid ethoxylate 4-tert-butylphenyl ether (GAE4E) is the most effective in terms of preventing organic group attachment and particle adhesion to the SiO2 surface, whether it was added to the cleaning solution or post-cleaning rinse water, with or without polystyrene latex particles. Moreover, it was possible to completely prevent particle adhesion to the SiO2 surface with the proper addition of GAE4E in DIO3 solution.

  13. Parenting, Family Socioeconomic Status, and Child Executive Functioning: A Longitudinal Study

    ERIC Educational Resources Information Center

    Rochette, Émilie; Bernier, Annie

    2014-01-01

    Family socioeconomic status (SES) and the quality of maternal behavior are among the few identified predictors of child executive functioning (EF), and they have often been found to have interactive rather than additive effects on other domains of child functioning. The purpose of this study was to explore their interactive effects in the…

  14. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    ERIC Educational Resources Information Center

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  15. Preliminary study of neutron absorption by concrete with boron carbide addition

    SciTech Connect

    Abdullah, Yusof Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ariffin, Fatin Nabilah Tajul; Ahmad, Sahrim; Hamid, Roszilah; Mohamed, Abdul Aziz

    2014-02-12

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  16. A study of the effects of an additional sound source on RASS performance

    SciTech Connect

    Coulter, R.L.

    1998-12-31

    The Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) site of the Atmospheric Radiation Measurements (ARM) Program continuously operates a nine panel 915 MHz wind profiler with Radio Acoustic Sounding System (RASS), measuring wind profiles for 50 minutes and virtual temperature profiles for the remaining 10 minutes during each hour. It is well recognized that one of the principal limits on RASS performance is high horizontal wind speed that moves the acoustic wave front sufficiently to prevent the microwave energy produced by the radar and scattered from the acoustic wave from being reflected back t the radar antenna. With this limitation in mind, the ARM program purchased an additional, portable acoustic source that could be mounted on a small trailer and placed in strategic locations to enhance the RASS performance (when it was not being used for spare parts). A test of the resulting improvement in RASS performance was performed during the period 1995--1997.

  17. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    PubMed Central

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m−3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments. PMID:26611142

  18. THERMODYNAMIC STUDY OF THE NICKEL ADDITION IN ZINC HOT-DIP GALVANIZING BATHS

    SciTech Connect

    Pistofidis, N.; Vourlias, G.

    2010-01-21

    A usual practice during zinc hot-dip galvanizing is the addition of nickel in the liquid zinc which is used to inhibit the Sandelin effect. Its action is due to the fact that the zeta(zeta) phase of the Fe-Zn system is replaced by the TAU(tau) phase of the Fe-Zn-Ni system. In the present work an attempt is made to explain the formation of the TAU phase with thermodynamics. For this reason the Gibbs free energy changes for TAU and zeta phases were calculated. The excess free energy for the system was calculated with the Redlich-Kister polyonyme. From this calculation it was deduced that the Gibbs energy change for the tau phase is negative. As a result its formation is spontaneous.

  19. Preliminary study of neutron absorption by concrete with boron carbide addition

    NASA Astrophysics Data System (ADS)

    Abdullah, Yusof; Ariffin, Fatin Nabilah Tajul; Hamid, Roszilah; Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ahmad, Sahrim; Mohamed, Abdul Aziz

    2014-02-01

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  20. Additive Manufacturing of a Microbial Fuel Cell--A detailed study.

    PubMed

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m(-3) per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments. PMID:26611142

  1. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    NASA Astrophysics Data System (ADS)

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-11-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m-3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments.

  2. Contrasting soil fungal community responses to experimental nitrogen addition using the large subunit rRNA taxonomic marker and cellobiohydrolase I functional marker.

    PubMed

    Mueller, Rebecca C; Balasch, Monica M; Kuske, Cheryl R

    2014-09-01

    Human activities have resulted in increased nitrogen inputs into terrestrial ecosystems, but the impact of nitrogen on ecosystem function, such as nutrient cycling, will depend at least in part on the response of soil fungal communities. We examined the response of soil fungi to experimental nitrogen addition in a loblolly pine forest (North Carolina, USA) using a taxonomic marker (large subunit rDNA, LSU) and a functional marker involved in a critical step of cellulose degradation (cellobiohydrolase, cbhI) at five time points that spanned fourteen months. Sampling date had no impact on fungal community richness or composition for either gene. Based on the LSU, nitrogen addition led to increased fungal community richness, reduced relative abundance of fungi in the phylum Basidiomycota and altered community composition; however, similar shifts were not observed with cbhI. Fungal community dissimilarity of the LSU and cbhI genes was significantly correlated in the ambient plots, but not in nitrogen-amended plots, suggesting either functional redundancy of fungi with the cbhI gene or shifts in other functional groups in response to nitrogen addition. To determine whether sequence similarity of cbhI could be predicted based on taxonomic relatedness of fungi, we conducted a phylogenetic analysis of publically available cbhI sequences from known isolates and found that for a subset of isolates, similar cbhI genes were found within distantly related fungal taxa. Together, these findings suggest that taxonomic shifts in the total fungal community do not necessarily result in changes in the functional diversity of fungi. PMID:25039479

  3. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy. PMID:27424134

  4. Dosage and duration effects of nitrogen additions on ectomycorrhizal sporocarp production and functioning: an example from two N-limited boreal forests

    PubMed Central

    Hasselquist, Niles J; Högberg, Peter

    2014-01-01

    Although it is well known that nitrogen (N) additions strongly affect ectomycorrhizal (EM) fungal community composition, less is known about how different N application rates and duration of N additions affect the functional role EM fungi play in the forest N cycle.We measured EM sporocarp abundance and species richness as well as determined the δ15N in EM sporocarps and tree foliage in two Pinus sylvestris forests characterized by short- and long-term N addition histories and multiple N addition treatments. After 20 and 39 years of N additions, two of the long-term N addition treatments were terminated, thereby providing a unique opportunity to examine the temporal recovery of EM sporocarps after cessation of high N loading.In general, increasing N availability significantly reduced EM sporocarp production, species richness, and the amount of N retained in EM sporocarps. However, these general responses were strongly dependent on the application rate and duration of N additions. The annual addition of 20 kg·N·ha−1 for the past 6 years resulted in a slight increase in the production and retention of N in EM sporocarps, whereas the addition of 100 kg·N·ha−1·yr−1 during the same period nearly eliminated EM sporocarps. In contrast, long-term additions of N at rates of ca. 35 or 70 kg·N·ha−1·yr−1 for the past 40 years did not eliminate tree carbon allocation to EM sporocarps, although there was a decrease in the abundance and a shift in the dominant EM sporocarp taxa. Despite no immediate recovery, EM sporocarp abundance and species richness approached those of the control 20 years after terminating N additions in the most heavily fertilized treatment, suggesting a recovery of carbon allocation to EM sporocarps after cessation of high N loading.Our results provide evidence for a tight coupling between tree carbon allocation to and N retention in EM sporocarps and moreover highlight the potential use of δ15N in EM sporocarps as a relative

  5. Effects of Methylation on Zebularine Studied by Density Functional Theory

    NASA Astrophysics Data System (ADS)

    Selvam, Lalitha; Vasilyev, Vladislav; Wang, Feng; Vasilyev, Vladislav

    2009-06-01

    1-(β -D-ribofuranosyl)-2-pyrimidone (zebularine or zeb) and 1-(β -D-ribofuranosyl)-5-methyl-2-pyrimidinone (d5) are effective inhibitors of cytidine deaminases (CDA). Methyl modification of zeb at the C(5) position in the base moiety produces d5. A density functional theory (DFT) study reveals the impact of the methyl group on the electronic structures and spectra of the nucleoside pair. It is found that the addition of methyl group has little effect on the geometry of the nucleosides as well as their sugar puckering, but affects anisotropic properties such as dihedral angles, condensed Fukui functions and charge distribution can be seen in their molecular electrostatic potentials (MEPs). Electron spectra serve as the fingerprint for the methyl group. The valence spectra clearly indicate that the molecular pair is related in the inner valence space of IP > 20 eV, whereas the outer valence space reveals the methyl associated electronic structural modifications of the molecular pair. In the present study, the molecular orbitals (MO) such as MO8, MO18 and MO37 (HOMO as MO1) are identified as the fingerprint MOs for methyl, whereas other MOs marked in the figure are secondary methyl related MOs. Chemical shift in the inner shell and their spectra are also calculated. It reveals the similarities and differences of methyl effect to large nucleosides and small amino acids such as L-alanine.

  6. Te Rita Papesch: Case Study of an Exemplary Learner of Maori as an Additional Language

    ERIC Educational Resources Information Center

    Ratima, Matiu Tai; Papesch, Te Rita

    2014-01-01

    This paper presents a case study of the life experiences of one exemplar adult second language Maori learner--Te Rita Papesch. Te Rita was one of 17 participants who were interviewed as a part of the first author's PhD study which sought to answer the question: what factors lead to the development of proficiency in te reo Maori amongst adult…

  7. Generalized linear and generalized additive models in studies of species distributions: Setting the scene

    USGS Publications Warehouse

    Guisan, A.; Edwards, T.C., Jr.; Hastie, T.

    2002-01-01

    An important statistical development of the last 30 years has been the advance in regression analysis provided by generalized linear models (GLMs) and generalized additive models (GAMs). Here we introduce a series of papers prepared within the framework of an international workshop entitled: Advances in GLMs/GAMs modeling: from species distribution to environmental management, held in Riederalp, Switzerland, 6-11 August 2001. We first discuss some general uses of statistical models in ecology, as well as provide a short review of several key examples of the use of GLMs and GAMs in ecological modeling efforts. We next present an overview of GLMs and GAMs, and discuss some of their related statistics used for predictor selection, model diagnostics, and evaluation. Included is a discussion of several new approaches applicable to GLMs and GAMs, such as ridge regression, an alternative to stepwise selection of predictors, and methods for the identification of interactions by a combined use of regression trees and several other approaches. We close with an overview of the papers and how we feel they advance our understanding of their application to ecological modeling. ?? 2002 Elsevier Science B.V. All rights reserved.

  8. Numerical study of the effect of water addition on gas explosion.

    PubMed

    Liang, Yuntao; Zeng, Wen

    2010-02-15

    Through amending the SENKIN code of CHEMKIN III chemical kinetics package, a computational model of gas explosion in a constant volume bomb was built, and the detailed reaction mechanism (GRI-Mech 3.0) was adopted. The mole fraction profiles of reactants, some selected free radicals and catastrophic gases in the process of gas explosion were analyzed by this model. Furthermore, through the sensitivity analysis of the reaction mechanism of gas explosion, the dominant reactions that affect gas explosion and the formation of catastrophic gases were found out. At the same time, the inhibition mechanisms of water on gas explosion and the formation of catastrophic gases were analyzed. The results show that the induced explosion time is prolonged, and the mole fractions of reactant species such as CH(4), O(2) and catastrophic gases such as CO, CO(2) and NO are decreased as water is added to the mixed gas. With the water fraction in the mixed gas increasing, the sensitivities of the dominant reactions contributing to CH(4), CO(2) are decreased and the sensitivity coefficients of CH(4), CO and NO mole fractions are also decreased. The inhibition of gas explosion with water addition can be ascribed to the significant decrease of H, O and OH in the process of gas explosion due to the water presence. PMID:19811873

  9. Chromosome studies in the aquatic monocots of Myanmar: A brief review with additional records

    PubMed Central

    2014-01-01

    Abstract Myanmar (Burma) constitutes a significant component of the Indo-Myanmar biodiversity hotspot, with elements of the Indian, the Indochina, and the Sino-Japanese floristic regions, yet thus far only a few reliable sources of the country's flora have been available. As a part of a contribution for the floristic inventory of Myanmar, since it is important in a floristic survey to obtain as much information as possible, in addition to previous two reports, here we present three more chromosome counts in the aquatic monocots of Myanmar: Limnocharis flava with 2n = 20, Sagittaria trifolia with 2n = 22 (Alismataceae), and Potamogeton distinctus × Potamogeton nodosus with 2n = 52 (Potamogetonaceae); the third one is new to science. A brief review of cytological researches in the floristic regions' 45 non-hybrid aquatic monocots plus well investigated two inter-specific hybrids that are recorded in Myanmar is given, indicating that the further works with a focus on species in Myanmar that has infra-specific chromosome variation in the floristic regions will address the precise evolutionary history of the aquatic flora of Myanmar. PMID:24891826

  10. Exploratory studies of extended storage of apheresis platelets in a platelet additive solution (PAS).

    PubMed

    Slichter, Sherrill J; Corson, Jill; Jones, Mary Kay; Christoffel, Todd; Pellham, Esther; Bailey, S Lawrence; Bolgiano, Doug

    2014-01-01

    To evaluate the poststorage viability of apheresis platelets stored for up to 18 days in 80% platelet additive solution (PAS)/20% plasma, 117 healthy subjects donated platelets using the Haemonetics MCS+, COBE Spectra (Spectra), or Trima Accel (Trima) systems. Control platelets from the same subjects were compared with their stored test PAS platelets by radiolabeling their stored and control platelets with either (51)chromium or (111)indium. Trima platelets met Food and Drug Administration poststorage platelet viability criteria for only 7 days vs almost 13 days for Haemonetics platelets; ie, platelet recoveries after these storage times averaged 44 ± 3% vs 49 ± 3% and survivals were 5.4 ± 0.3 vs 4.6 ± 0.3 days, respectively. The differences in storage duration are likely related to both the collection system and the storage bag. The Spectra and Trima platelets were hyperconcentrated during collection, and PAS was added, whereas the Haemonetics platelets were elutriated with PAS, which may have resulted in less collection injury. When Spectra and Trima platelets were stored in Haemonetics' bags, poststorage viability was significantly improved. Platelet viability is better maintained in vitro than in vivo, allowing substantial increases in platelet storage times. However, implementation will require resolution of potential bacterial overgrowth during storage. PMID:24258816

  11. Ionoluminescence study of Zn- and O- implanted ZnO crystals: An additional perspective

    NASA Astrophysics Data System (ADS)

    Epie, E. N.; Chu, W. K.

    2016-05-01

    An investigation into the role of native point defects on the optical properties of ZnO using ion implantation, rapid thermal annealing (RTA) and ionoluminescence (IL) is presented. Low-energy (60 keV) fixed-fluence (8 × 1015 cm-2) Zn- and O- implantation has been used to directly introduce native point defects into ZnO single crystals. It is shown that annealing of implanted samples in Ar at T = 1000 °C for 2 min amplifies the deep band emission (DBE) peak centered around 2.4 eV while at the same time revealing subtle differences not clearly resolved in similar implanted samples treated under prolonged annealing. Particularly, a relative shift in the DBE peak maxima of the O and Zn doped samples subjected to RTA is observed. Gaussian decomposition of the IL spectra show distinct enhancements of the red (1.62 eV) and yellow (2.15 eV) emission bands in the O- implanted sample and the green (2.36 eV) emission band in the Zn- implanted sample. Based on these results, and recent density functional theory (DFT) calculations, we have proposed a possible energy level scheme for some common ZnO native point defects.

  12. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  13. Olfactory functioning in early multiple sclerosis: Sniffin’ Sticks Test study

    PubMed Central

    Batur Caglayan, Hale Z; Irkec, Ceyla; Nazliel, Bijen; Akyol Gurses, Aslı; Capraz, Irem

    2016-01-01

    Introduction Previous studies have shown that olfactory functioning is affected by multiple sclerosis (MS). This study assessed the level of the olfactory impairment in early MS by using the Sniffin’ Sticks Test. Methods This study included 30 patients with MS and 30 healthy controls. We collected demographic and clinical data from participants and administered the Sniffin’ Sticks Test. Results We found no differences between the MS and control groups in odor discrimination, odor identification, and threshold discrimination identification scores, but odor threshold (OT) scores were higher in the control group than in the MS group (P=0.49). In addition, we did not find any correlation between MS patients’ olfactory test scores and their scores on the Mini–Mental State Examination (MMSE), Expanded Disability Status Scale (EDSS), disease duration, history of optic neuritis, or being on immunomodulatory therapy. Conclusion In recent studies, odor threshold impairment seemed to be the most striking finding in patients with MS. Although the present study found a mild alteration in odor threshold, olfactory dysfunction appears to be a consequence of neurodegeneration in the higher order olfactory brain regions, which is thought to be a time-dependent process. PMID:27621629

  14. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  15. Additional Study of Water Droplet Median Volume Diameter (MVD) Effects on Ice Shapes

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching; Anderson, David N.

    2005-01-01

    This paper reports the result of an experimental study in the NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the MVD-independent effect identified previously might apply to SLD conditions in rime icing situations. Models were NACA 0012 wing sections with chords of 53.3 and 91.4 cm. Tests were conducted with a nominal airspeed of 77 m/s (150 kt) and a number of MVD's ranging from 15 to 100 m with LWC of 0.5 to 1 g/cu m. In the present study, ice shapes recorded from past studies and recent results at SLD and Appendix-C conditions are reviewed to show that droplet diameter is not important to rime ice shape for MVD of 30 microns or larger, but for less than 30 m drop sizes a rime ice shape transition from convex to wedge to spearhead type ice shape is observed.

  16. Study on Type C Coal Fly ash as an Additive to Molding Sand for Steel Casting

    NASA Astrophysics Data System (ADS)

    Palaniappan, Jayanthi

    2016-05-01

    Study of physio-chemical properties studies such as granulometric analysis, moisture, X ray fluorescence etc. were performed with Type C coal—combustion fly ash to investigate their potential as a distinct option for molding sand in foundry, thereby reducing the dependency on latter. Technological properties study such as compressive strength, tensile strength, permeability and compaction of various compositions of fly ash molding sand (10, 20 and 30 % fly ash substitute to chemically bonded sand) were performed and compared with silica molding sand. Steel casting production using this fly ash molding sand was done and the casting surface finish and typical casting parameters were assessed. It was noted that a good quality steel casting could be produced using type C fly ash molding sand, which effectively replaced 20 % of traditional molding sand and binders thereby providing greater financial profits to the foundry and an effective way of fly ash utilization (waste management).

  17. In situ vitrification and the effects of soil additives; A mixture experiment case study

    SciTech Connect

    Piepel, G.F.; Shade, J.W. )

    1992-01-01

    This paper presents a case study involving in situ vitrification (ISV), a process for immobilizing chemical or nuclear wastes in soil by melting-dissolving the contaminated soil into a glass block. One goal of the study was to investigate how viscosity and electrical conductivity were affected by mixing CaO and Na{sub 2}O with soil. A three-component constrained-region mixture experiment design was generated and the viscosity and electrical conductivity data collected. Several second-order mixture models were considered, and the Box-Cox transformation technique was applied to select property transformations. The fitted models were used to produce contour and component effects plots.

  18. Nonlinear responses to nitrogen and strong interactions with nitrogen and phosphorus additions drastically alter the structure and function of a high arctic ecosystem

    NASA Astrophysics Data System (ADS)

    Arens, Seth J. T.; Sullivan, Patrick F.; Welker, Jeffrey M.

    2008-09-01

    Significant changes in ecosystem CO2 exchange and vegetation characteristics were observed following multiple additions of nitrogen (N) and factorial additions of N and phosphorus (P) to prostrate dwarf-shrub, herb tundra in Northwest Greenland. Ecosystem CO2 exchange and vegetation cover and composition were very sensitive to low rates of N inputs (0.5 g m-2 y-1), indicating that even low rates of atmospheric N deposition may alter high arctic ecosystem structure and function. Increasing N addition from 1 to 5 g N m-2 y-1 did not alter CO2 exchange or vegetation characteristics, suggesting the ecosystem had become N saturated. Factorial additions of both N and P released the ecosystem from N saturation and dramatically increased gross ecosystem photosynthesis (+500%) and ecosystem respiration (+250%), such that the ecosystem switched from a small source of CO2 to a small sink for CO2 at midday during the 2005 growing season. Changes in the component fluxes of CO2 exchange were largely explained by a doubling of the normalized difference vegetation index, a 100% increase in vascular plant cover and dramatic increases in the abundance of several previously rare grass species. Our results clearly demonstrate that high arctic prostrate dwarf-shrub, herb tundra is highly sensitive to low levels of N addition and that future increases in N deposition or N mineralization will likely lead to change in carbon cycling and vegetation characteristics, but the magnitude of the response will be constrained by P availability.

  19. A review of approaches to the study of turbulence modification by means of non-Newtonian additives

    NASA Astrophysics Data System (ADS)

    Vlassopoulos, Dimitris; Schowalter, William R.

    1987-12-01

    The addition of small amounts of polymers to Newtonian liquids under conditions of turbulent flow results in substantial reduction of skin friction. This phenomenon has been observed experimentally. It can be attributed to the unusual behavior of dilute polymer solutions in turbulent flows. A condensed review of topics relevent to theoretical study of drag reduction by non-Newtonian additives is presented. In addition, the techniques and results of experimental investigations of this phenomenon are examined. It is proposed that dilute solutions of polymers or surfactants can be rheologically characterized by measuring the secondary flow characteristics that occur in the neighborhood of an oscillating cylinder. Plans for conducting these measurements are presented.

  20. A Study of the Effect of Additional Reading Assistance on Student Achievement

    ERIC Educational Resources Information Center

    Gillan-Sanderson, Nicole A.

    2012-01-01

    This study describes a procedure one school district used to increase students' reading abilities through reviewing data and adjusting the instruction to give students intensive services, as needed. This school worked in a problem-solving team approach to develop a comprehensive team that followed the progression of student achievement.…

  1. Genome-Wide Association Study of Intelligence: Additive Effects of Novel Brain Expressed Genes

    ERIC Educational Resources Information Center

    Loo, Sandra K.; Shtir, Corina; Doyle, Alysa E.; Mick, Eric; McGough, James J.; McCracken, James; Biederman, Joseph; Smalley, Susan L.; Cantor, Rita M.; Faraone, Stephen V.; Nelson, Stanley F.

    2012-01-01

    Objective: The purpose of the present study was to identify common genetic variants that are associated with human intelligence or general cognitive ability. Method: We performed a genome-wide association analysis with a dense set of 1 million single-nucleotide polymorphisms (SNPs) and quantitative intelligence scores within an ancestrally…

  2. Nahuatl as a Classical, Foreign, and Additional Language: A Phenomenological Study

    ERIC Educational Resources Information Center

    De Felice, Dustin

    2012-01-01

    In this study, participants learning an endangered language variety shared their experiences, thoughts, and feelings about the often complex and diverse language-learning process. I used phenomenological interviews in order to learn more about these English or Spanish language speakers' journey with the Nahuatl language. From first encounter to…

  3. CNV-based genome wide association study reveals additional variants contributing to meat quality in swine

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Pork quality is important both to the meat processing industry and consumers’ purchasing attitudes. Copy number variation (CNV) is a burgeoning kind of variant that may influence meat quality. Herein, a genome-wide association study (GWAS) was performed between CNVs and meat quality traits in swine....

  4. Disrupted Brain Functional Network in Internet Addiction Disorder: A Resting-State Functional Magnetic Resonance Imaging Study

    PubMed Central

    Yap, Pew-Thian; Wu, Guorong; Shi, Feng; Price, True; Du, Yasong; Xu, Jianrong; Zhou, Yan; Shen, Dinggang

    2014-01-01

    Internet addiction disorder (IAD) is increasingly recognized as a mental health disorder, particularly among adolescents. The pathogenesis associated with IAD, however, remains unclear. In this study, we aim to explore the encephalic functional characteristics of IAD adolescents at rest using functional magnetic resonance imaging data. We adopted a graph-theoretic approach to investigate possible disruptions of functional connectivity in terms of network properties including small-worldness, efficiency, and nodal centrality on 17 adolescents with IAD and 16 socio-demographically matched healthy controls. False discovery rate-corrected parametric tests were performed to evaluate the statistical significance of group-level network topological differences. In addition, a correlation analysis was performed to assess the relationships between functional connectivity and clinical measures in the IAD group. Our results demonstrate that there is significant disruption in the functional connectome of IAD patients, particularly between regions located in the frontal, occipital, and parietal lobes. The affected connections are long-range and inter-hemispheric connections. Although significant alterations are observed for regional nodal metrics, there is no difference in global network topology between IAD and healthy groups. In addition, correlation analysis demonstrates that the observed regional abnormalities are correlated with the IAD severity and behavioral clinical assessments. Our findings, which are relatively consistent between anatomically and functionally defined atlases, suggest that IAD causes disruptions of functional connectivity and, importantly, that such disruptions might link to behavioral impairments. PMID:25226035

  5. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  6. Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

    NASA Astrophysics Data System (ADS)

    Gujarati, Vivek P.; Deshpande, M. P.; Patel, Kamakshi R.; Chaki, S. H.

    2016-05-01

    Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

  7. Brief reconnaissance study for the addition of hydropower for Riegel Dam, Trion, Georgia

    SciTech Connect

    Gebhard, T.G. Jr.

    1982-05-10

    The feasibility of retrofitting the Riegel Dam near Trion, Georgia for power generation was examined. This dam has a developable head of 17 ft., was built in 1900 for supplying hydroelectric power for a textile mill, and currently provides cooling water to the mill. The study of environmental, institutional, safety and economic factors showed that hydroelectric power development at this site would require new generating equipment and that such retrofitting appears to be economically feasible. (LCL)

  8. Brief reconnaissance study for the addition of hydropower for Carr Fork Dam, Sassafras, Kentucky

    SciTech Connect

    Gebhard, T.G. Jr.

    1982-05-24

    The feasibility of retrofitting the Carr Fork Dam near Hazard, KY for power generation was examined. This dam has a developable head of 80 ft and was built in 1975 to provide flood protection. The study of environmental, institutional, safety, and economic factors showed that the total investment cost would be $909,600 and that hydroelectric power development at this site is not feasible unless a higher price could be obtained for the power sold. (LCL)

  9. Density functional studies of representative pericyclic reactions

    NASA Astrophysics Data System (ADS)

    Carpenter, John E.; Sosa, Carlos P.

    1994-07-01

    Density functional theory (DFT) has traditionally been shunned by computational chemists, but has long seen widespread use in the physics community. Recently, however, DFT has been adopted by the ab initio quantum chemistry community and much activity has been devoted to refining the methodology and exploring the range of its applicability. We investigate the use of DFT (both local (LDF) and non-local (NLDF) spin density approximations) to calculate transition and equilibrium structures for three representative pericyclic reactions: the electrocyclic ring opening reaction of cyclobutene, the [1,5] sigmatropic hydrogen shift reaction in (Z)-1,3-pentadiene, and the Diels-Alder cycloaddition reaction between ethylene and butadiene. LDF theory tends to overemphasize the stability of the ringed structures in each of these reactions. For example, LDF predicts a very low (6 kcal mol -1) barrier to reaction for the Deils-Alder reaction. NLDF theory substantially improves the calculated reaction barrier (20 kcal mol -1), but it is still low with respect to experiment.

  10. Immediate postoperative radiotherapy in residual nonfunctioning pituitary adenoma: Beneficial effect on local control without additional negative impact on pituitary function and life expectancy

    SciTech Connect

    Bergh, Alfons C.M. van den . E-mail: a.c.m.van.den.bergh@rt.umcg.nl; Berg, Gerrit van den; Schoorl, Michiel A.; Sluiter, Wim J.; Vliet, Anton M. van der; Hoving, Eelco W.; Szabo, Ben G.; Langendijk, Johannes A.; Wolffenbuttel, Bruce H.R.; Dullaart, Robin P.F.

    2007-03-01

    Purpose: To demonstrate the benefit of immediate postoperative radiotherapy in residual nonfunctioning pituitary adenoma (NFA) in perspective to the need for hormonal substitution and life expectancy. Methods and Materials: Retrospective cohort analysis of 122 patients, operated for NFA between 1979 and 1998. Recurrence was defined as regrowth on computed tomography or magnetic resonance imaging. The occurrence of hormonal deficiencies was defined as the starting date of hormonal substitution therapy. Results: Seventy-six patients had residual NFA after surgery and received immediate postoperative radiotherapy (Group 1); three patients developed a recurrence, resulting in a 95% local control rate at 10 years. Twenty-eight patients had residual NFA after surgery, but were followed by a wait-and-see policy (Group 2). Sixteen developed a recurrence, resulting in a local control rate of 49% at 5 years and 22% at 10 years (p < 0.001 compared with Group 1). There were no differences between Group 1 and 2 regarding the need for substitution with thyroid hormone, glucocorticoids, and sex hormones before first surgery, directly after surgery and at end of follow-up. There were no differences in hormone substitution free survival between Group 1 and Group 2 during the study period after first surgery. Life expectancy was similar in Group 1 and 2, and their median life expectancy did not differ from median life expectancy in the general population. Conclusions: Immediate postoperative radiotherapy provides a marked improvement of local control among patients with residual NFA compared with surgery alone, without an additional deleterious effect on pituitary function and life expectancy.

  11. A clinical comparative study of Cadiax Compact II and intraoral records using wax and addition silicone.

    PubMed

    Torabi, Kianoosh; Pour, Sasan Rasaei; Ahangari, Ahmad Hassan; Ghodsi, Safoura

    2014-01-01

    Evaluation of mandibular movements is necessary to form the occlusal anatomical contour, analyze the temporomandibular joint status, and evaluate the patient's occlusion. This clinical study was conducted to compare the mandibular recording device Cadiax Compact II with routine intraoral records for measuring condylar inclinations. The results showed that the differences between Cadiax and intraoral records were statistically significant for all measurements. Cadiax measurements had a stronger correlation with silicone records. The quantities of recorded Bennett angles were lower and the values of sagittal condylar inclination were higher with Cadiax than with routine intraoral records. PMID:25390868

  12. [Chewing gum as an additional agent in maintaining oral hygiene versus smoking status--preliminary study].

    PubMed

    Nakonieczna-Rudnicka, Marta; Strycharz-Dudziak, Małgorzata; Bachanek, Teresa

    2012-01-01

    Nowadays chewing gum is widely used in different age groups, so complying with proper duration and frequency of chewing is an important factor influencing the state of masticatory system. The study involved 112 dental students of the Medical University of Lublin. Everyday use of chewing gum declared 47,32% of cases. Chewing time up to 10 minutes was stated in 23,08% of respondents, 11-20 minutes in 40,38% of interviewees. Among the examined students 17,3% smoked cigarettes. In smokers group 83,33% of questioned chewed the gum every day, while among non-smokers - 43,37%. Chewing time shorter than 10 minutes declared 22,22% of smokers and 23,26% of non-smokers, while chewing time between 11-20 minutes - 27,78% i 44,35% of smokers and non-smokers respectively. Obtained results indicate the need of carrying out further studies aimed at the nicotine influence on saliva parameters with respect to development of diseases of hard tooth tissues. PMID:23421028

  13. Study on the interaction of the toxic food additive carmoisine with serum albumins: a microcalorimetric investigation.

    PubMed

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-05-30

    The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10(6)M(-1) and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5-8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy-entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine. PMID:24742664

  14. Combined ab initio molecular dynamics and experimental studies of carbon atom addition to benzene.

    PubMed

    McKee, Michael L; Reisenauer, Hans Peter; Schreiner, Peter R

    2014-04-17

    Car-Parrinello molecular dynamics was used to explore the reactions between triplet and singlet carbon atoms with benzene. The computations reveal that, in the singlet C atom reaction, products are very exothermic where nearly every collision yields a product that is determined by the initial encounter geometry. The singlet C atom reaction does not follow the minimum energy path because the bimolecular reaction is controlled by dynamics (i.e., initial orientation of encounter). On the other hand, in a 10 K solid Ar matrix, ground state C((3)P) atoms do tend to follow RRKM kinetics. Thus, ab initio molecular dynamics (AIMD) results indicate that a significant fraction of C-H insertion occurs to form phenylcarbene whereas, in marked contrast to previous theoretical and experimental conclusions, the Ar matrix isolation studies indicate a large fraction of direct cycloheptatetraene formation, without the intermediacy of phenylcarbene. The AIMD calculations are more consistent with vaporized carbon atom experiments where labeling studies indicate the initial formation of phenylcarbene. This underlines that the availability of thermodynamic sinks can completely alter the observed reaction dynamics. PMID:24661002

  15. Achromatic synesthesias - a functional magnetic resonance imaging study.

    PubMed

    Melero, H; Ríos-Lago, M; Peña-Melián, A; Álvarez-Linera, J

    2014-09-01

    Grapheme-color synesthetes experience consistent, automatic and idiosyncratic colors associated with specific letters and numbers. Frequently, these specific associations exhibit achromatic synesthetic qualities (e.g. white, black or gray). In this study, we have investigated for the first time the neural basis of achromatic synesthesias, their relationship to chromatic synesthesias and the achromatic congruency effect in order to understand not only synesthetic color but also other components of the synesthetic experience. To achieve this aim, functional magnetic resonance imaging experiments were performed in a group of associator grapheme-color synesthetes and matched controls who were stimulated with real chromatic and achromatic stimuli (Mondrians), and with letters and numbers that elicited different types of grapheme-color synesthesias (i.e. chromatic and achromatic inducers which elicited chromatic but also achromatic synesthesias, as well as congruent and incongruent ones). The information derived from the analysis of Mondrians and chromatic/achromatic synesthesias suggests that real and synesthetic colors/achromaticity do not fully share neural mechanisms. The whole-brain analysis of BOLD signals in response to the complete set of synesthetic inducers revealed that the functional peculiarities of the synesthetic brain are distributed, and reflect different components of the synesthetic experience: a perceptual component, an (attentional) feature binding component, and an emotional component. Additionally, the inclusion of achromatic experiences has provided new evidence in favor of the emotional binding theory, a line of interpretation which constitutes a bridge between grapheme-color synesthesia and other developmental modalities of the phenomenon. PMID:24845620

  16. Enzymatic Halogenases and Haloperoxidases: Computational Studies on Mechanism and Function.

    PubMed

    Timmins, Amy; de Visser, Sam P

    2015-01-01

    Despite the fact that halogenated compounds are rare in biology, a number of organisms have developed processes to utilize halogens and in recent years, a string of enzymes have been identified that selectively insert halogen atoms into, for instance, a CH aliphatic bond. Thus, a number of natural products, including antibiotics, contain halogenated functional groups. This unusual process has great relevance to the chemical industry for stereoselective and regiospecific synthesis of haloalkanes. Currently, however, industry utilizes few applications of biological haloperoxidases and halogenases, but efforts are being worked on to understand their catalytic mechanism, so that their catalytic function can be upscaled. In this review, we summarize experimental and computational studies on the catalytic mechanism of a range of haloperoxidases and halogenases with structurally very different catalytic features and cofactors. This chapter gives an overview of heme-dependent haloperoxidases, nonheme vanadium-dependent haloperoxidases, and flavin adenine dinucleotide-dependent haloperoxidases. In addition, we discuss the S-adenosyl-l-methionine fluoridase and nonheme iron/α-ketoglutarate-dependent halogenases. In particular, computational efforts have been applied extensively for several of these haloperoxidases and halogenases and have given insight into the essential structural features that enable these enzymes to perform the unusual halogen atom transfer to substrates. PMID:26415843

  17. Microstructure and Transport Studies of Functionalized Graphene

    NASA Astrophysics Data System (ADS)

    Gamble, Ron; Lewis, Darryl; Seifu, Dereje; Camacho, Jorge; Strongin, Myron; Zhang, Liyuan

    2011-03-01

    The microstructure and transport studies of fuctionalized graphene are reported. These studies reveal that the minimum conductivity is sample dependent and within the range (2-12) e 2 /h independent of gate voltage. The variation of the minimum conductivity is attributed to sample impurities, apparent in Atomic Force Microscopy and Raman Spectroscopy. The Raman peaks are in general consistent with graphene, but show shifts in the G and 2D peaks. These shifts are associated with strain and doping. The dependence of the current (I) on the bias voltage (VSD) is linear for most samples. The current dependence on gate voltage (Vg) curves show asymmetric behavior, showing the imbalance between the hole and electron carriers. A 16 A deposition of Fe leads to a significant modification in the transport properties due mostly the formation of iron oxide. The AFM clearly shows the formation of Fe clusters. DOE/NSF Faculty-Student Teams Program.

  18. Shelf Life and Quality Study of Minced Tilapia with Nori and Hijiki Seaweeds as Natural Additives

    PubMed Central

    Ribeiro, Ingridy Simone; Shirahigue, Ligianne Din; Ferraz de Arruda Sucasas, Lia; Anbe, Lika; da Cruz, Pedro Gomes; Gallo, Cláudio Rosa; Carpes, Solange Teresinha; Marques, Marcos José; Oetterer, Marília

    2014-01-01

    The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage. PMID:25478593

  19. Shelf life and quality study of minced tilapia with Nori and Hijiki seaweeds as natural additives.

    PubMed

    Ribeiro, Ingridy Simone; Shirahigue, Ligianne Din; Ferraz de Arruda Sucasas, Lia; Anbe, Lika; da Cruz, Pedro Gomes; Gallo, Cláudio Rosa; Carpes, Solange Teresinha; Marques, Marcos José; Oetterer, Marília

    2014-01-01

    The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage. PMID:25478593

  20. Biological effect of food additive titanium dioxide nanoparticles on intestine: an in vitro study.

    PubMed

    Song, Zheng-Mei; Chen, Ni; Liu, Jia-Hui; Tang, Huan; Deng, Xiaoyong; Xi, Wen-Song; Han, Kai; Cao, Aoneng; Liu, Yuanfang; Wang, Haifang

    2015-10-01

    Titanium dioxide nanoparticles (TiO2 NPs) are widely found in food-related consumer products. Understanding the effect of TiO2 NPs on the intestinal barrier and absorption is essential and vital for the safety assessment of orally administrated TiO2 NPs. In this study, the cytotoxicity and translocation of two native TiO2 NPs, and these two TiO2 NPs pretreated with the digestion simulation fluid or bovine serum albumin were investigated in undifferentiated Caco-2 cells, differentiated Caco-2 cells and Caco-2 monolayer. TiO2 NPs with a concentration less than 200 µg ml(-1) did not induce any toxicity in differentiated cells and Caco-2 monolayer after 24 h exposure. However, TiO2 NPs pretreated with digestion simulation fluids at 200 µg ml(-1) inhibited the growth of undifferentiated Caco-2 cells. Undifferentiated Caco-2 cells swallowed native TiO2 NPs easily, but not pretreated NPs, implying the protein coating on NPs impeded the cellular uptake. Compared with undifferentiated cells, differentiated ones possessed much lower uptake ability of these TiO2 NPs. Similarly, the traverse of TiO2 NPs through the Caco-2 monolayer was also negligible. Therefore, we infer the possibility of TiO2 NPs traversing through the intestine of animal or human after oral intake is quite low. This study provides valuable information for the risk assessment of TiO2 NPs in food. PMID:26106068

  1. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-08-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of a similar magnitude, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity-dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  2. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-12-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters, and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied with experimental methods. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of similar magnitudes, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  3. Value addition of Palmyra palm and studies on the storage life.

    PubMed

    Chaurasiya, A K; Chakraborty, I; Saha, J

    2014-04-01

    Palmyra palm (Borassus flabellifer L.) belonging to the family Palmae is referred to as tree of life with several uses including food, beverage, fibre, medicinal and timber. Unfortunately, the nutritionally enriched pulp of ripened palm has limited commercial use. Extraction of pulp has been accomplished by using water and heat to ensure maximum pulp recovery. Different recipes were tried for the preparation of two uncommon value added products like palm spread and palm toffee. On the basis of biochemical composition, organoleptic scores, microbial estimation and storage study both under ambient and refrigerated conditions; the suitable recipe was selected with the maximum acceptability. Gradual increase in total soluble solid (TSS), total sugar and reducing sugar while decrease in ascorbic acid, pH, β-carotene and protein content of processed products have been observed irrespective of storage condition. The results obtained from sensory evaluation and microbial status revealed that palm spread and toffee remained acceptable up to 9 months and 8 months, respectively at ambient temperature. The income per rupee investment for these two products was found to be remunerative. PMID:24741173

  4. Mass analysis addition to the Differential Ion Flux Probe (DIFP) study

    NASA Technical Reports Server (NTRS)

    Wright, K. H., Jr.; Jolley, Richard

    1994-01-01

    The objective of this study is to develop a technique to measure the characteristics of space plasmas under highly disturbed conditions; e.g., non-Maxwellian plasmas with strong drifting populations and plasmas contaminated by spacecraft outgassing. The approach, conducted in conjunction with current MSFC activities, is to extend the capabilities of the Differential Ion Flux Probe (DIFP) to include a high throughput mass measurement that does not require either high voltage or contamination sensitive devices such as channeltron electron multipliers or microchannel plates. This will significantly reduce the complexity and expense of instrument fabrication, testing, and integration of flight hardware compared to classical mass analyzers. The feasibility of the enhanced DIFP has been verified by using breadboard test models in a controlled plasma environment. The ability to manipulate particles through the instrument regardless of incident angle, energy, or ionic component has been amply demonstrated. The energy analysis mode is differential and leads directly to a time-of-flight mass measurement. With the new design, the DIFP will separate multiple ion streams and analyze each stream independently for ion flux intensity, velocity (including direction of motion), mass, and temperature (or energy distribution). In particular, such an instrument will be invaluable on follow-on electrodynamic TSS missions and, possibly, for environmental monitoring on the space station.

  5. Sexual abuse predicts functional somatic symptoms: an adolescent population study.

    PubMed

    Bonvanie, Irma J; van Gils, Anne; Janssens, Karin A M; Rosmalen, Judith G M

    2015-08-01

    The main aim of this study was to investigate the effect of childhood sexual abuse on medically not well explained or functional somatic symptoms (FSSs) in adolescents. We hypothesized that sexual abuse predicts higher levels of FSSs and that anxiety and depression contribute to this relationship. In addition, we hypothesized that more severe abuse is associated with higher levels of FSSs and that sexual abuse is related to gastrointestinal FSSs in particular. This study was part of the Tracking Adolescents' Individual Lives Survey (TRAILS): a general population cohort which started in 2001 (N=2,230; 50.8% girls, mean age 11.1 years). The current study uses data of 1,680 participants over four assessment waves (75% of baseline, mean duration of follow-up: 8 years). FSSs were measured by the Somatic Complaints subscale of the Youth Self-Report at all waves. Sexual abuse before the age of sixteen was assessed retrospectively with a questionnaire at T4. To test the hypotheses linear mixed models were used adjusted for age, sex, socioeconomic status, anxiety and depression. Sexual abuse predicted higher levels of FSSs after adjustment for age sex and socioeconomic status (B=.06) and after additional adjustment for anxiety and depression (B=.03). While sexual abuse involving physical contact significantly predicted the level of FSSs (assault; B=.08, rape; B=.05), non-contact sexual abuse was not significantly associated with FSSs (B=.04). Sexual abuse was not a stronger predictor of gastrointestinal FSSs (B=.06) than of all FSSs. Further research is needed to clarify possible mechanisms underlying relationship between sexual abuse and FSSs. PMID:26142915

  6. Additional weight load increases freezing of gait episodes in Parkinson's disease; an experimental study.

    PubMed

    Mensink, Senja H G; Nonnekes, Jorik; van Bon, Geert; Snijders, Anke H; Duysens, Jacques; Weerdesteyn, Vivian; Bloem, Bastiaan R; Oude Nijhuis, Lars B

    2014-05-01

    Freezing of gait is an episodic gait disorder,characterized by the inability to generate effective forward stepping movements. The pathophysiology underlying freezing of gait remains insufficiently understood, and this hampers the development of better treatment strategies.Preliminary evidence suggests that impaired force control during walking may contribute to freezing episodes, with difficulty to unload the swing leg and initiate the swing phase. Here, we used external loading to manipulate force control and to investigate its influence on freezing of gait.Twelve Parkinson's disease patients with freezing of gait performed three contrasting tasks: (1) loaded gait while wearing a belt fortified with lead weights; (2) weight supported gait using a parachute harness connected to a rigid metal cable running above the gait trajectory; and (3)normal gait. Gait tasks were used to provoke freezing episodes, including rapid 360° turns. Freezing episodes were quantified using blinded, videotaped clinical assessment. Furthermore, ground reaction forces and body kinematics were recorded. Loading significantly increased the mean number of freezing episodes per trial compared to the normal gait condition (P<0.05), but the effect of weight support was not consistent. Loading particularly increased the number of freezing episodes during rapid short steps. Step length was significantly smaller during loaded gait compared to normal gait (P<0.05), but changes in anticipatory postural adjustments were not different.Our results may point to impaired force control playing a key role in freezing of gait. Future studies should further investigate the mechanism, i.e., the contribution of deficient load feedback, and evaluate which forms of weight support might offer treatment opportunities. PMID:24658705

  7. A population study of binocular function.

    PubMed

    Bosten, J M; Goodbourn, P T; Lawrance-Owen, A J; Bargary, G; Hogg, R E; Mollon, J D

    2015-05-01

    As part of a genome-wide association study (GWAS) of perceptual traits in healthy adults, we measured stereo acuity, the duration of alternative percepts in binocular rivalry and the extent of dichoptic masking in 1060 participants. We present the distributions of the measures, the correlations between measures, and their relationships to other psychophysical traits. We report sex differences, and correlations with age, interpupillary distance, eye dominance, phorias, visual acuity and personality. The GWAS, using data from 988 participants, yielded one genetic association that passed a permutation test for significance: The variant rs1022907 in the gene VTI1A was associated with self-reported ability to see autostereograms. We list a number of other suggestive genetic associations (p<10(-5)). PMID:25771401

  8. Studying the issues in the additive manufacturing of dental implants by Electron Beam MeltingRTM (EBM)

    NASA Astrophysics Data System (ADS)

    Jamshidinia, Mahdi

    The ability of additive manufacturing (AM) processes to produce complex geometries is resulting in their rapid acceptance by a number of industries. This unique capability could be used for the optimization of the design of functional components that could find an application in different industries such as aerospace, automotive, energy, medical, and implants. However, there are still some challenges confronting this technology such as surface finish, residual stress, dimensional tolerance, processing speed, and anisotropy in microstructure and mechanical properties. Any of the mentioned issues could be influenced by the thermal history of a 3D printed component during the layer-by-layer manufacturing. Therefore, an understanding of the thermal cycling during the AM process is essential. In recent years, significant advances have been achieved in the design, manufacturing, and materials used for dental implants. However, there are still some differences between the natural tooth and a dental implant that might decrease patient satisfaction. One of the differences between the natural tooth and a dental implant is in its modulus of elasticity, which could result in an issue known as bone atrophy. The second important difference between a dental implant and a natural tooth is the fact that a natural tooth is surrounded by a periodontal ligament that allows the tooth to move in three directions. However, the periodontal ligament is destroyed during the extraction of a natural tooth. In the absence of the periodontal ligament, the biting force is directly transferred to the jawbone, resulting in discomfort for the patient. Also, the implant cannot be incorporated with the surrounding natural tooth and form a bridge. In this study, the application of a lattice structure for the manufacturing of a biocompatible dental implant is investigated. Three different lattice structures with different unit cell sizes were experimentally and numerically analyzed. The mechanical

  9. Electronic structures of hydrogen functionalized carbon nanotube: Density functional theory (DFT) study

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto; Iyama, Tetsuji; Kawabata, Hiroshi

    2016-05-01

    Electronic structures and formation mechanism of hydrogen functionalized carbon nanotube (CNT) have been investigated by means of density functional theory (DFT) method. The mechanism of hydrogen addition reaction to the CNT surface was also investigated. Pure and boron-nitrogen (BN) substituted CNT (denoted by CNT and BN-CNT, respectively) were examined as the carbon nanotubes. It was found that the additions of hydrogen atom to B (boron atom) and C (carbon atom) sites of BN-CNT proceed without activation barrier, whereas the hydrogenation of N (nitrogen atom) site needs the activation energy. The electronic states of hydrogen functionalized CNT and BN-CNT were discussed on the basis of theoretical results.

  10. The cumulative cost of additional wakefulness: dose-response effects on neurobehavioral functions and sleep physiology from chronic sleep restriction and total sleep deprivation

    NASA Technical Reports Server (NTRS)

    Van Dongen, Hans P A.; Maislin, Greg; Mullington, Janet M.; Dinges, David F.

    2003-01-01

    OBJECTIVES: To inform the debate over whether human sleep can be chronically reduced without consequences, we conducted a dose-response chronic sleep restriction experiment in which waking neurobehavioral and sleep physiological functions were monitored and compared to those for total sleep deprivation. DESIGN: The chronic sleep restriction experiment involved randomization to one of three sleep doses (4 h, 6 h, or 8 h time in bed per night), which were maintained for 14 consecutive days. The total sleep deprivation experiment involved 3 nights without sleep (0 h time in bed). Each study also involved 3 baseline (pre-deprivation) days and 3 recovery days. SETTING: Both experiments were conducted under standardized laboratory conditions with continuous behavioral, physiological and medical monitoring. PARTICIPANTS: A total of n = 48 healthy adults (ages 21-38) participated in the experiments. INTERVENTIONS: Noctumal sleep periods were restricted to 8 h, 6 h or 4 h per day for 14 days, or to 0 h for 3 days. All other sleep was prohibited. RESULTS: Chronic restriction of sleep periods to 4 h or 6 h per night over 14 consecutive days resulted in significant cumulative, dose-dependent deficits in cognitive performance on all tasks. Subjective sleepiness ratings showed an acute response to sleep restriction but only small further increases on subsequent days, and did not significantly differentiate the 6 h and 4 h conditions. Polysomnographic variables and delta power in the non-REM sleep EEG-a putative marker of sleep homeostasis--displayed an acute response to sleep restriction with negligible further changes across the 14 restricted nights. Comparison of chronic sleep restriction to total sleep deprivation showed that the latter resulted in disproportionately large waking neurobehavioral and sleep delta power responses relative to how much sleep was lost. A statistical model revealed that, regardless of the mode of sleep deprivation, lapses in behavioral alertness

  11. A Pilot Study to Examine the Effect of Additional Structured Outdoor Playtime on Preschoolers' Physical Activity Levels

    ERIC Educational Resources Information Center

    Alhassan, Sofiya; Nwaokelemeh, Ogechi; Lyden, Kate; Goldsby, TaShauna; Mendoza, Albert

    2013-01-01

    The impact of additional structured outdoor playtime on preschoolers'; physical activity (PA) level is unclear. The purpose of this pilot study was to explore the effects of increasing structured outdoor playtime on preschoolers'; PA levels. Eight full-day classrooms (n = 134 children) from two preschool programmes were randomised into a treatment…

  12. STUDY OF THE EFFECT OF CHLORINE ADDITION ON MERCURY OXIDATION BY SCR CATALYST UNDER SIMULATED SUBBITUMINOUS COAL FLUE GAS

    EPA Science Inventory

    An entrained flow reactor is used to study the effect of addition of chlorine-containing species on the oxidation of elemental mercury (Hgo)by a selective catalytic reduction (SCR) catalyst in simulated subbituminous coal combustion flue gas. The combustion flue gas was doped wit...

  13. Studying the effect of nano lead compounds additives on the concrete shielding properties for γ-rays

    NASA Astrophysics Data System (ADS)

    Hassan, H. E.; Badran, H. M.; Aydarous, A.; Sharshar, T.

    2015-10-01

    In the present work the effect of concrete incorporation with two types of nano-lead compounds on its γ-ray shielding characteristics is investigated. The concrete samples were prepared according to the local standards of building materials and doped by different percentages of PbO and PbTiO3 nano powders which were prepared using co-precipitation and oxalate precursor techniques, respectively. In addition, commercial PbO2 powder additive was used to check the effect of particle size on concrete attenuation properties. The phase composition and particle size of all the lead-oxide additives were confirmed by XRD and TEM imaging. The γ-rays attenuation coefficients were measured as a function of the additive percentage of lead compounds for γ-ray energies of 662, 1173 and 1332 keV using 137Cs and 60Co sources. The microstructure changes occurred in the concrete samples doped with Pb compounds additives were probed using the positron annihilation spectroscopy (PAS) and the results were compared with that for normal concrete. The obtained data revealed that the overall defect density of the investigated samples, as seen by the positrons, decreases with increasing the nano-PbO contents which is in agreement with the determined values of the samples apparent densities. It was found that the γ-ray attenuation coefficient of concrete doped by nano-PbO is improved. The results are explained in the view of the fine structure enhanced modification and its impact on the γ-ray interaction probability at different energies.

  14. A Density Functional Study of the Americium (001) Surface

    NASA Astrophysics Data System (ADS)

    Gao, Da; Ray, Asok Kumar

    2006-03-01

    Electronic structure properties of the fcc americium (001) surface, modeled by periodically repeated fcc Am (001) surface slabs, have been studied with the full-potential linearized augmented plane wave (FP-LAPW) method. The alternative basis set APW+lo is used inside the atomic spheres for chemically important orbitals that are difficult to converge, whereas LAPW is used for others. The core states are treated fully relativistically and for valence states, two levels of treatments are implemented: (1) a scalar relativistic scheme including the mass-velocity correction and the Darwin s-shift and (2) a fully relativistic scheme with spin-orbit coupling included in a second variational treatment using the scalar-relativistic eigenfunctions as basis. Our results indicate that the ground state of Am (001) surface is anti-ferromagnetic. The quantum size effects in the surface energies and the work functions of the (001) fcc americium ultra thin films (UTF) have been examined up to seven layers. In addition, the Am (001) surface properties are compared with our earlier study of the Am (111) surface.

  15. Improvement of Cycling Performance of Lithium-Sulfur Batteries by Using Magnesium Oxide as a Functional Additive for Trapping Lithium Polysulfide.

    PubMed

    Ponraj, Rubha; Kannan, Aravindaraj G; Ahn, Jun Hwan; Kim, Dong-Won

    2016-02-17

    Trapping lithium polysulfides formed in the sulfur positive electrode of lithium-sulfur batteries is one of the promising approaches to overcome the issues related to polysulfide dissolution. In this work, we demonstrate that intrinsically hydrophilic magnesium oxide (MgO) nanoparticles having surface hydroxyl groups can be used as effective additives to trap lithium polysulfides in the positive electrode. MgO nanoparticles were uniformly distributed on the surface of the active sulfur, and the addition of MgO into the sulfur electrode resulted in an increase in capacity retention of the lithium-sulfur cell compared to a cell with pristine sulfur electrode. The improvement in cycling stability was attributed to the strong chemical interactions between MgO and lithium polysulfide species, which suppressed the shuttling effect of lithium polysulfides and enhanced the utilization of the sulfur active material. To the best of our knowledge, this report is the first demonstration of MgO as an effective functional additive to trap lithium polysulfides in lithium-sulfur cells. PMID:26808673

  16. Effect of the addition of β-mannanase on the performance, metabolizable energy, amino acid digestibility coefficients, and immune functions of broilers fed different nutritional levels.

    PubMed

    Ferreira, H C; Hannas, M I; Albino, L F T; Rostagno, H S; Neme, R; Faria, B D; Xavier, M L; Rennó, L N

    2016-08-01

    Three experiments were conducted to evaluate the effect of β-mannanase BM: supplementation on the performance, metabolizable energy, amino acid digestibility, and immune function of broilers. A total of 1,600 broilers were randomly distributed in a 4 × 2 factorial arrangement (4 nutritional levels × 0 or 500 g/ton BM), with 10 replicates and 20 broilers per pen. The same design was used in the energy and digestibility experiments with 8 and 6 replicates, respectively, and 6 broilers per pen. The nutritional levels : NL : were formulated to meet the nutritional requirements of broilers : NL1 : ; reductions of 100 kcal metabolizable energy : NL2 : ; 3% of the total amino acids (NL3); and 100 kcal metabolizable energy and 3% total amino acids (NL4) from NL1. The serum immunoglobulin (Ig) concentration was determined in two broilers per pen, and these broilers were slaughtered to determine the relative weight of spleen, thymus, and bursa of Fabricius. Throughout the experiment, the lower nutritional levels reduced (P < 0.05) body weight gain : BWG : and increased (P < 0.05) feed conversion : FCR : for the NL4 treatment. The BM increased (P < 0.05) the BWG values and improved (P < 0.05) the FCR of the broilers. The apparent metabolizable energy corrected for nitrogen balance (AMEn) values were reduced (P < 0.05) for NL2 and NL3. The BM increased (P < 0.05) the AMEn values and reduced (P < 0.05) the excreted nitrogen. NL3 and NL4 reduced (P < 0.05) the true ileal digestibility coefficients (TIDc) of the amino acids cystine and glycine, and BM increased (P < 0.05) the TIDc for all amino acids. The addition of BM reduced (P < 0.05) the relative weights of the spleen and bursa. NL2 increased (P < 0.05) the Ig values, whereas BM reduced (P < 0.05) the serum IgA, IgG, and IgM values of the broilers. This study indicates that using suboptimal nutrient levels leads to losses in production parameters, whereas BM-supplemented diets were effective in improving performance

  17. Effect of the addition of β-mannanase on the performance, metabolizable energy, amino acid digestibility coefficients, and immune functions of broilers fed different nutritional levels

    PubMed Central

    Ferreira, H. C.; Hannas, M. I.; Albino, L. F. T.; Rostagno, H. S.; Neme, R.; Faria, B. D.; Xavier, M. L.; Rennó, L. N.

    2016-01-01

    Three experiments were conducted to evaluate the effect of β-mannanase (BM) supplementation on the performance, metabolizable energy, amino acid digestibility, and immune function of broilers. A total of 1,600 broilers were randomly distributed in a 4 × 2 factorial arrangement (4 nutritional levels × 0 or 500 g/ton BM), with 10 replicates and 20 broilers per pen. The same design was used in the energy and digestibility experiments with 8 and 6 replicates, respectively, and 6 broilers per pen. The nutritional levels (NL) were formulated to meet the nutritional requirements of broilers (NL1); reductions of 100 kcal metabolizable energy (NL2); 3% of the total amino acids (NL3); and 100 kcal metabolizable energy and 3% total amino acids (NL4) from NL1. The serum immunoglobulin (Ig) concentration was determined in two broilers per pen, and these broilers were slaughtered to determine the relative weight of spleen, thymus, and bursa of Fabricius. Throughout the experiment, the lower nutritional levels reduced (P < 0.05) body weight gain (BWG) and increased (P < 0.05) feed conversion (FCR) for the NL4 treatment. The BM increased (P < 0.05) the BWG values and improved (P < 0.05) the FCR of the broilers. The apparent metabolizable energy corrected for nitrogen balance (AMEn) values were reduced (P < 0.05) for NL2 and NL3. The BM increased (P < 0.05) the AMEn values and reduced (P < 0.05) the excreted nitrogen. NL3 and NL4 reduced (P < 0.05) the true ileal digestibility coefficients (TIDc) of the amino acids cystine and glycine, and BM increased (P < 0.05) the TIDc for all amino acids. The addition of BM reduced (P < 0.05) the relative weights of the spleen and bursa. NL2 increased (P < 0.05) the Ig values, whereas BM reduced (P < 0.05) the serum IgA, IgG, and IgM values of the broilers. This study indicates that using suboptimal nutrient levels leads to losses in production parameters, whereas BM-supplemented diets were effective in improving performance, energy

  18. Understanding the effects of a multi-functionalized additive on the cathode-electrolyte interfacial stability of Ni-rich materials

    NASA Astrophysics Data System (ADS)

    Yim, Taeeun; Kang, Kyoung Seok; Mun, Junyoung; Lim, Sang Hoo; Woo, Sang-Gil; Kim, Ki Jae; Park, Min-Sik; Cho, Woosuk; Song, Jun Ho; Han, Young-Kyu; Yu, Ji-Sang; Kim, Young-Jun

    2016-01-01

    Nickel-rich lithium nickel cobalt manganese oxides have received considerable attention as a promising cathode material, however, they have suffered from poor interfacial stability, especially at high temperature. Here, we suggest a bi-functionalized divinyl sulfone that enhances the applicability of a nickel-rich cathode via stabilization of the electrolyte-electrode interface. The divinyl sulfone forms a protective layer on the cathode surface by electrochemical oxidation reactions and this greatly decreases the internal pressure of the cell via stabilization of the Ni-rich cathode-electrolyte interface. The cell controlled with divinyl sulfone shows remarkable cycling performance with 91.9% capacity retention at elevated temperature even after 100 cycles. Additional electrode analyses and first-principles calculations provide critical spectroscopic evidences to demonstrate the combined effects of the sulfone and vinyl functional groups. Once the divinyl sulfone is electrochemically oxidized, the vinyl functional groups readily participate in further stabilizing sulfone-based solid electrolyte interphase intermediates and afford a durable protective layer on the nickel-rich electrode surface.

  19. Pair distribution function study on compression of liquid gallium

    SciTech Connect

    Luo, Shengnian; Yu, Tony; Chen, Jiuhua; Ehm, Lars; Guo, Quanzhong; Parise, John

    2008-01-01

    Integrating a hydrothermal diamond anvil cell (HDAC) and focused high energy x-ray beam from the superconductor wiggler X17 beamline at the National Synchrotron Light Source (NSLS) at the Brookhaven National Laboratory (BNL), we have successfully collected high quality total x-ray scattering data of liquid gallium. The experiments were conducted at a pressure range from 0.1GPa up to 2GPa at ambient temperature. For the first time, pair distribution functions (PDF) for liquid gallium at high pressure were derived up to 10 {angstrom}. Liquid gallium structure has been studied by x-ray absorption (Di Cicco & Filipponi, 1993; Wei et al., 2000; Comez et al., 2001), x-ray diffraction studies (Waseda & Suzuki, 1972), and molecular dynamics simulation (Tsay, 1993; Hui et al., 2002). These previous reports have focused on the 1st nearest neighbor structure, which tells us little about the atomic arrangement outside the first shell in non- crystalline materials. This study focuses on the structure of liquid gallium and the atomic structure change due to compression. The PDF results show that the observed atomic distance of the first nearest neighbor at 2.78 {angstrom} (first G(r) peak and its shoulder at the higher Q position) is consistent with previous studies by x-ray absorption (2.76 {angstrom}, Comez et al., 2001). We have also observed that the first nearest neighbor peak position did not change with pressure increasing, while the farther peaks positions in the intermediate distance range decreased with pressure increasing. This leads to a conclusion of the possible existence of 'locally rigid units' in the liquid. With the addition of reverse Monte Carlo modeling, we have observed that the coordination number in the local rigit unit increases with pressure. The bulk modulus of liquid gallium derived from the volume compression curve at ambient temperature (300K) is 12.1(6) GPa.

  20. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    NASA Astrophysics Data System (ADS)

    Raguvarun, K.; Balasubramaniam, Krishnan; Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Hoye, Nicholas; Curiri, Dominic; Kapoor, Ajay

    2015-03-01

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  1. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    SciTech Connect

    Raguvarun, K. Balasubramaniam, Krishnan Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Kapoor, Ajay; Hoye, Nicholas; Curiri, Dominic

    2015-03-31

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  2. Studies on the effect of plasticiser and addition of toluene diisocyanate at different temperatures in composite propellant formulations.

    PubMed

    Jawalkar, S N; Mehilal; Ramesh, K; Radhakrishnan, K K; Bhattacharya, B

    2009-05-30

    Different composite propellant mixtures have been prepared using ammonium perchlorate, aluminium powder and hydroxyl terminated polybutadiene by varying the percentage of plasticiser and addition of toluene diisocyanate at different temperatures, and studied their different properties such as viscosity build-up, mechanical and ballistic properties and sensitivity. The data on different plasticiser level indicate that on decreasing the plasticiser content, there is a significant enhancement in end of mix viscosity, tensile strength and modulus while elongation decreases drastically. The data on sensitivity of the studied mixtures reveal that on decreasing the percentage of plasticiser, the sensitivity increases, accordingly. Further, the data on the effect of addition of TDI at different temperatures (35-60 degrees C) infer that on increasing the addition temperature of TDI there is a decrease in end of mix viscosity i.e. 800Pas at 35 degrees C to 448Pas at 60 degrees C. Moreover, there is no effect on mechanical and ballistic properties on higher temperature addition of TDI was observed. PMID:18835097

  3. Thermodynamic study of the complexation between Nd(3+) and functionalized diacetamide ligands in solution.

    PubMed

    Dau, Phuong V; Zhang, Zhicheng; Dau, Phuong D; Gibson, John K; Rao, Linfeng

    2016-07-26

    A series of amine functionalized ligands, including 2,2'-(benzylazanediyl)bis(N,N'-dimethylacetamide) (BnABDMA), 2,2'-azanediylbis(N,N'-dimethylacetamide) (ABDMA), and 2,2'-(methylazanediyl)bis(N,N'-dimethylacetamide) (MABDMA), are synthesized for the thermodynamic study of their complexation with Nd(3+) ions. Their complexation in solution is investigated using potentiometry, spectrophotometry, calorimetry, and electrospray ionization mass spectrometry. The results suggest that these ligands act as tridentate ligands. Furthermore, direct comparison between ABDMA and an analogous ether-functionalized ligand, 2,2'-oxybis(N,N'-dimethylacetamide) (TMDGA), showed that the amine functionalized ligand forms thermodynamically stronger complexes with Nd(3+) ions than the ether-functionalized ligand. In addition, the amine functionalized ligand can allow the fine-tuning of the binding strength with metal ions via substitution on the central amine N atom with different functional groups, which is not possible for ether functionalized ligands such as TMDGA. PMID:27222301

  4. The Neural Basis of Typewriting: A Functional MRI Study

    PubMed Central

    Higashiyama, Yuichi; Takeda, Katsuhiko; Someya, Yoshiaki; Kuroiwa, Yoshiyuki; Tanaka, Fumiaki

    2015-01-01

    To investigate the neural substrate of typewriting Japanese words and to detect the difference between the neural substrate of typewriting and handwriting, we conducted a functional magnetic resonance imaging (fMRI) study in 16 healthy volunteers. All subjects were skillful touch typists and performed five tasks: a typing task, a writing task, a reading task, and two control tasks. Three brain regions were activated during both the typing and the writing tasks: the left superior parietal lobule, the left supramarginal gyrus, and the left premotor cortex close to Exner’s area. Although typing and writing involved common brain regions, direct comparison between the typing and the writing task revealed greater left posteromedial intraparietal cortex activation in the typing task. In addition, activity in the left premotor cortex was more rostral in the typing task than in the writing task. These findings suggest that, although the brain circuits involved in Japanese typewriting are almost the same as those involved in handwriting, there are brain regions that are specific for typewriting. PMID:26218431

  5. Density-functional description of polymer crystals: A comparative study of recent van der Waals functionals

    NASA Astrophysics Data System (ADS)

    Pham, Thinh H.; Ramprasad, Rampi; Nguyen, Huy-Viet

    2016-06-01

    Due to the lack of treatment of long-range dispersion energies, density functional theory with local and semilocal approximations of exchange-correlation energy is known to fail in describing van der Waals complexes, including polymer crystals. This limitation can be overcome by using a different class of functionals, called van der Waals density functional (vdW-DF), originally developed by Dion et al. [Phys. Rev. Lett. 92, 246401 (2004)]. In this work, we performed a systematic study of structural properties of polymeric crystals using the original vdW-DF functional by Dion et al. and its variants and refinements. Our study shows that this class of functional outperforms the conventional LDA or PBE functionals and gives results with similar accuracy to that of empirical dispersion-corrected schemes such as DFT-D. This study suggests the use of vdW-DF2 functional — a revised version of vdW-DF functional — to obtain a high-fidelity prediction of structural and other properties of polymeric materials.

  6. Density-functional description of polymer crystals: A comparative study of recent van der Waals functionals.

    PubMed

    Pham, Thinh H; Ramprasad, Rampi; Nguyen, Huy-Viet

    2016-06-01

    Due to the lack of treatment of long-range dispersion energies, density functional theory with local and semilocal approximations of exchange-correlation energy is known to fail in describing van der Waals complexes, including polymer crystals. This limitation can be overcome by using a different class of functionals, called van der Waals density functional (vdW-DF), originally developed by Dion et al. [Phys. Rev. Lett. 92, 246401 (2004)]. In this work, we performed a systematic study of structural properties of polymeric crystals using the original vdW-DF functional by Dion et al. and its variants and refinements. Our study shows that this class of functional outperforms the conventional LDA or PBE functionals and gives results with similar accuracy to that of empirical dispersion-corrected schemes such as DFT-D. This study suggests the use of vdW-DF2 functional - a revised version of vdW-DF functional - to obtain a high-fidelity prediction of structural and other properties of polymeric materials. PMID:27276968

  7. Quantifying Additive Interactions of the Osmolyte Proline with Individual Functional Groups of Proteins: Comparisons with Urea and Glycine Betaine, Interpretation of m-Values

    PubMed Central

    Diehl, Roger C.; Guinn, Emily J.; Capp, Michael W.; Tsodikov, Oleg V.; Record, M. Thomas

    2013-01-01

    To quantify interactions of the osmolyte L-proline with protein functional groups and predict its effects on protein processes, we use vapor pressure osmometry to determine chemical potential derivatives dµ2/dm3 = µ23 quantifying preferential interactions of proline (component 3) with 21 solutes (component 2) selected to display different combinations of aliphatic or aromatic C, amide, carboxylate, phosphate or hydroxyl O, and/or amide or cationic N surface. Solubility data yield µ23 values for 4 less-soluble solutes. Values of µ23 are dissected using an ASA-based analysis to test the hypothesis of additivity and obtain α-values (proline interaction potentials) for these eight surface types and three inorganic ions. Values of µ23 predicted from these α-values agree with experiment, demonstrating additivity. Molecular interpretation of α-values using the solute partitioning model yields partition coefficients (Kp) quantifying the local accumulation or exclusion of proline in the hydration water of each functional group. Interactions of proline with native protein surface and effects of proline on protein unfolding are predicted from α-values and ASA information and compared with experimental data, with results for glycine betaine and urea, and with predictions from transfer free energy analysis. We conclude that proline stabilizes proteins because of its unfavorable interactions with (exclusion from) amide oxygens and aliphatic hydrocarbon surface exposed in unfolding, and that proline is an effective in vivo osmolyte because of the osmolality increase resulting from its unfavorable interactions with anionic (carboxylate and phosphate) and amide oxygens and aliphatic hydrocarbon groups on the surface of cytoplasmic proteins and nucleic acids. PMID:23909383

  8. LUNG FUNCTION IN SCHOOL CHILDREN: 1971-1972 CHATTANOOGA STUDY

    EPA Science Inventory

    Previous studies of lung function in children have indicated that decreases in lung function are associated with higher air pollution exposures. For this reason, three quarter second timed forced expiratory volume was chosen as one of the health indicators in the Environmental Pr...

  9. Using a generalized additive model with autoregressive terms to study the effects of daily temperature on mortality

    PubMed Central

    2012-01-01

    Background Generalized Additive Model (GAM) provides a flexible and effective technique for modelling nonlinear time-series in studies of the health effects of environmental factors. However, GAM assumes that errors are mutually independent, while time series can be correlated in adjacent time points. Here, a GAM with Autoregressive terms (GAMAR) is introduced to fill this gap. Methods Parameters in GAMAR are estimated by maximum partial likelihood using modified Newton’s method, and the difference between GAM and GAMAR is demonstrated using two simulation studies and a real data example. GAMM is also compared to GAMAR in simulation study 1. Results In the simulation studies, the bias of the mean estimates from GAM and GAMAR are similar but GAMAR has better coverage and smaller relative error. While the results from GAMM are similar to GAMAR, the estimation procedure of GAMM is much slower than GAMAR. In the case study, the Pearson residuals from the GAM are correlated, while those from GAMAR are quite close to white noise. In addition, the estimates of the temperature effects are different between GAM and GAMAR. Conclusions GAMAR incorporates both explanatory variables and AR terms so it can quantify the nonlinear impact of environmental factors on health outcome as well as the serial correlation between the observations. It can be a useful tool in environmental epidemiological studies. PMID:23110601

  10. Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

    NASA Astrophysics Data System (ADS)

    Marya, Manuel; Singh, Virendra; Marya, Surendar; Hascoet, Jean Yves

    2015-08-01

    Additive manufacturing (AM) brings disruptive changes to the ways parts, and products are designed, fabricated, tested, qualified, inspected, marketed, and sold. These changes introduce novel technical challenges and concerns arising from the maturity and diversity of today's AM processes, feedstock materials, and process parameter interactions. AM bears a resemblance with laser and electron beam welding in the so-called conduction mode, which involves a multitude of dynamic physical events between the projected feedstock and a moving heat source that eventually influence AM part properties. For this paper, an air vent was selected for its thin-walled, hollow, and variable cross section, and limited size. The studied air vents, randomly selected from a qualification batch, were fabricated out of 316L stainless steel using a 4 kW fiber laser powder-fed AM system, referred to as construction laser additive direct (CLAD). These were systematically characterized by microhardness indentation, visual examination, optical and scanning electron microscopy, and electron-back-scattering diffraction in order to determine AM part suitability for service and also broadly discuss metallurgical phenomena. The paper then briefly expands the discussion to include additional engineering alloys and further analyze relationships between AM process parameters and AM part properties, consistently utilizing past experience with the same powder-fed CLAD 3D printer, the well-established science and technology of welding and joining, and recent publications on additive manufacturing.

  11. Study of the effects of potassium addition to supported iron catalysts in the Fischer-Tropsch reaction

    SciTech Connect

    Miller, D.G.; Moskovits, M.

    1988-10-20

    The Fischer-Tropsch activity of supported iron catalysts prepared via electrochemical techniques has been evaluated as a function of potassium addition. Catalyst pretreatment in 0.09, 0.18, and 0.27 M K/sub 2/CO/sub 3/ solutions generated potassium levels of 1.7, 2.8, and 3.9 wt %, respectively. Pretreatment in 0.18 M KOH provided a catalyst with 2.3 wt% potassium and facilitated comparison of the effects of the basicity of the pretreatment solution upon catalyst activity. A maximum in catalyst activity and CO conversion was noted upon increasing K content, followed by a sharp decline in activity at potassium levels in excess of the maximum. The hydrogenation ability of the catalyst decreased, and a shift to higher molecular weight products was observed, with increasing potassium content. The type of pretreatment solution had little effect on the catalyst activity or the product selectivity.

  12. Development and evaluation of an immunochromatographic strip for rapid screening of sildenafil-type compounds as illegal additives in functional foods.

    PubMed

    Guo, Jiebiao; Liu, Wangpei; Lan, Xianquan; Chen, Hualong; Xiao, Zijun

    2016-07-01

    Sildenafil is a phosphodiesterase-5 inhibitor (PDE-5) for the treatment of erectile dysfunction. Undeclared sildenafil and related analogues adulterated in functional foods are a threat to public health. To screen these illegal drugs rapidly in herbal samples, an immunochromatographic (IC) assay was developed based on polyclonal antibodies specific to both sildenafil and its analogues. A group that is pharmacological necessary for sildenafil and its analogues was employed as a representative hapten for the generation antibodies against the target compounds. The desired antisera showed satisfactory specificities to sildenafil and major analogues with IC50 values ranging from 19.3 to 34.6 ng ml(-1) in a referring enzyme-linked immunosorbent assay (ELISA). The optimised IC assay showed detection thresholds in the range 5.0-20 μg g(-1) for sildenafil and major analogues in herbal samples. Sixty herbal food supplements were screened and six were found to be positive using the IC strip. It was confirmed by ELISA and UPLC-PDA-MS/MS that positive samples contain target illegal additives in levels of 10-40 mg g(-1) (1-4%). In this range, sensitivity of the IC strip is adequate to screen sildenafil-type compounds in herbal commodities under a dilution ratio of 1:10(3). Thus, the current IC assay is a suitable tool for screening sildenafil and its analogues as illegal additives in herbal food supplements. PMID:27310564

  13. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  14. Effect of One Percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study

    PubMed Central

    Asokan, Sharath; John, J Baby; Priya, PR Geetha; Devi, Jagadeesan Gnana

    2015-01-01

    ABSTRACT Aim: The aim of the study was to evaluate the effect of addition of 1% chlorhexidine digluconate solution on the antibacterial activity and mechanical properties of glass ionomer and resin based sealant. Materials and methods: Conventional glass ionomer sealant (GIS) (Fuji VII, Japan) and resin sealant (Clinpro 3M ESPE, USA) were used in this study. Chlorhexidine digluconate (CHX) (20%) liquid was added to both the sealants, and the concentration of chlorhexidine in sealants was adjusted to 1%. The sealants were divided into four groups as: group A (GIS), group B (GIS + 1% CHX), group C (resin sealant), group D (resin sealant + 1% CHX). Five cylindrical specimens were prepared in each group. Their antibacterial activity against Streptococcus mutans and Lactobacillus acidophilus, and their mechanical properties (compressive strength and diametrical tensile strength) were assessed. Mann-Whitney and Wilcoxon signed rank test were used appropriately for statistical analysis (SPSS version 19). Result: Addition of one percent chlorhexidine significantly increased the antibacterial activity of both the sealants. There was a significant difference between groups A and B (p < 0.009), and groups C and D (p < 0.008). There was no significant difference in the mechanical properties of the sealants. Conclusion: Addition of one percent chlorhexidine to the glass ionomer and resin based sealants provided sufficient antibacterial activity, without significantly affecting the mechanical property of the sealants. How to cite this article: Shanmugaavel AK, Asokan S, John JB, Geetha Priya PR, Gnana Devi J. Effect of one percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study. Int J Clin Pediatr Dent 2015;8(3):196-201. PMID:26628854

  15. Alcohol abuse and HIV infection have additive effects on frontal cortex function as measured by auditory evoked potential P3A latency.

    PubMed

    Fein, G; Biggins, C A; MacKay, S

    1995-02-01

    Both alcohol and human immunodeficiency virus (HIV) infection have been shown to produce central nervous system (CNS) morbidity in frontal brain regions. The degree to which the CNS morbidity in HIV infection, as it affects frontal cortex function, may be preferentially increased by alcohol abuse was examined using the auditory P3A evoked potential. The P3A indexes an orienting response, maximal over frontal cortex that occurs when novel nontarget stimuli are presented in the midst of a target detection paradigm. Four groups of subjects were compared: HIV+ alcohol abusers, HIV+ light/nondrinkers, HIV- alcohol abusers, and HIV- light/nondrinkers. The alcohol abuser and light/nondrinker HIV+ groups were matched on percent CD4 lymphocytes, insuring that the results reflected specific CNS effects and were not a result of differences between the groups in the degree of systemic immune suppression. Alcohol abuse and HIV infection had at least additive effects on P3A latency, consistent with alcohol abuse worsening the effect of HIV disease on frontal cortex function. Post-hoc analyses suggested that concomitant alcohol abuse results in the effects of HIV infection on P3A latency becoming manifest earlier in the HIV disease process. PMID:7727627

  16. An additional fluorenylmethoxycarbonyl (Fmoc) moiety in di-Fmoc-functionalized L-lysine induces pH-controlled ambidextrous gelation with significant advantages.

    PubMed

    Reddy, Samala Murali Mohan; Shanmugam, Ganesh; Duraipandy, Natarajan; Kiran, Manikantan Syamala; Mandal, Asit Baran

    2015-11-01

    In recent years, several fluorenylmethoxycarbonyl (Fmoc)-functionalized amino acids and peptides have been used to construct hydrogels, which find a wide range of applications. Although several hydrogels have been prepared from mono Fmoc-functionalized amino acids, herein, we demonstrate the importance of an additional Fmoc-moiety in the hydrogelation of double Fmoc-functionalized L-lysine [Fmoc(Nα)-L-lysine(NεFmoc)-OH, (Fmoc-K(Fmoc))] as a low molecular weight gelator (LMWG). Unlike other Fmoc-functionalized amino acid gelators, Fmoc-K(Fmoc) exhibits pH-controlled ambidextrous gelation (hydrogelation at different pH values as well as organogelation), which is significant among the gelators. Distinct fibrous morphologies were observed for Fmoc-K(Fmoc) hydrogels formed at different pH values, which are different from organogels in which Fmoc-K(Fmoc) showed bundles of long fibers. In both hydrogels and organogels, the self-assembly of Fmoc-K(Fmoc) was driven by aromatic π-π stacking and hydrogen bonding interactions, as evidenced from spectroscopic analyses. Characterization of Fmoc-K(Fmoc) gels using several biophysical methods indicates that Fmoc-K(Fmoc) has several advantages and significant importance as a LMWG. The advantages of Fmoc-K(Fmoc) include pH-controlled ambidextrous gelation, pH stimulus response, high thermal stability (∼100 °C) even at low minimum hydrogelation concentration (0.1 wt%), thixotropic property, high kinetic and mechanical stability, dye removal properties, cell viability to the selected cell type, and as a drug carrier. While single Fmoc-functionalized L-lysine amino acids failed to exhibit gelation under similar experimental conditions, the pH-controlled ambidextrous gelation of Fmoc-K(Fmoc) demonstrates the benefit of a second Fmoc moiety in inducing gelation in a LMWG. We thus strongly believe that the current findings provide a lead to construct or design various new synthetic Fmoc-based LMW organic gelators for several

  17. A feasibility study regarding the addition of a fifth control to a rotorcraft in-flight simulator

    NASA Technical Reports Server (NTRS)

    Turner, Simon; Andrisani, Dominick, II

    1992-01-01

    The addition of a large movable horizontal tail surface to the control system of a rotorcraft in-flight simulator being developed from a Sikorsky UH-60A Black Hawk Helicopter is evaluated. The capabilities of the control surface as a trim control and as an active control are explored. The helicopter dynamics are modeled using the Generic Helicopter simulation program developed by Sikorsky Aircraft. The effect of the horizontal tail on the helicopter trim envelope is examined by plotting trim maps of the aircraft attitude and controls as a function of the flight speed and horizontal tail incidence. The control power of the tail surface relative to that of the other controls is examined by comparing control derivatives extracted from the simulation program over the flight speed envelope. The horizontal tail's contribution as an active control is evaluated using an explicit model following control synthesis involving a linear model of the helicopter in steady, level flight at a flight speed of eighty knots. The horizontal tail is found to provide additional control flexibility in the longitudinal axis. As a trim control, it provides effective control of the trim pitch attitude at mid to high forward speeds. As an active control, the horizontal tail provides useful pitching moment generating capabilities at mid to high forward speeds.

  18. Semiparametric Stochastic Modeling of the Rate Function in Longitudinal Studies

    PubMed Central

    Zhu, Bin; Taylor, Jeremy M.G.; Song, Peter X.-K.

    2011-01-01

    In longitudinal biomedical studies, there is often interest in the rate functions, which describe the functional rates of change of biomarker profiles. This paper proposes a semiparametric approach to model these functions as the realizations of stochastic processes defined by stochastic differential equations. These processes are dependent on the covariates of interest and vary around a specified parametric function. An efficient Markov chain Monte Carlo algorithm is developed for inference. The proposed method is compared with several existing methods in terms of goodness-of-fit and more importantly the ability to forecast future functional data in a simulation study. The proposed methodology is applied to prostate-specific antigen profiles for illustration. Supplementary materials for this paper are available online. PMID:22423170

  19. A numerical study of the influence of ammonia addition on the auto-ignition limits of methane/air mixtures.

    PubMed

    Van den Schoor, F; Norman, F; Vandebroek, L; Verplaetsen, F; Berghmans, J

    2009-05-30

    In this study the auto-ignition limit of ammonia/methane/air mixtures is calculated based upon a perfectly stirred reactor model with convective heat transfer. The results of four different reaction mechanisms are compared with existing experimental data at an initial temperature of 723 K with ammonia concentrations of 0-20 mol.% and methane concentrations of 2.5-10 mol.%. It is found that the calculation of the auto-ignition limit pressure at constant temperature leads to larger relative deviations between calculated and experimental results than the calculation of the auto-ignition temperature at constant pressure. In addition to the calculations, a reaction path analysis is performed to explain the observed lowering of the auto-ignition limit of methane/air mixtures by ammonia addition. It is found that this decrease is caused by the formation of NO and NO(2), which enhance the oxidation of methane at low temperatures. PMID:18926632

  20. The influence of deposit control additives on nitrogen oxides emissions from spark ignition engines (case study: Tehran).

    PubMed

    Bidhendi, Gholamreza Nabi; Zand, Ali Daryabeigi; Tabrizi, Alireza Mikaeili; Pezeshk, Hamid; Baghvand, Akbar

    2007-04-15

    In the present research, the influence of a deposit control additive on NOx emissions from two types of gasoline engine vehicles i.e., Peykan (base on Hillman) and Pride (South Korea Kia motors) was studied. Exhaust NOx emissions were measured in to stages, before decarbonization process and after that. Statistical analysis was conducted on the measurement results. Results showed that NOx emissions from Peykans increased 0.28% and NOx emissions from Pride automobiles decreased 6.18% on average, due to the elimination of engine deposits. The observed variations were not statistically and practically significant. The results indicated that making use of detergent additives is not an effective way to reduce the exhaust NOx emissions from gasoline engine vehicles. PMID:19069943

  1. A mechanistic study of the addition of alcohol to a five-membered ring silene via a photochemical reaction.

    PubMed

    Su, Ming-Der

    2016-03-21

    The mechanism for the photochemical rearrangement of a cyclic divinyldisilane (1-Si) in its first excited state ((1)π → (1)π*) is determined using the CAS/6-311G(d) and MP2-CAS/6-311++G(3df,3pd) levels of theory. The photoproduct, a cyclic silene, reacts with various alcohols to yield a mixture of cis- and trans- adducts. The two reaction pathways are denoted as the cis- addition path (path A) and the trans-addition path (path B). These model studies demonstrate that conical intersections play a crucial role in the photo-rearrangements of cyclic divinyldisilanes. The theoretical evidence also demonstrates that the addition of alcohol to a cyclic divinyldisilane follows the reaction path: cyclic divinyldisilane → Franck-Condon region → conical intersection → photoproduct (cyclic silene) → local intermediate (with alcohol) → transition state → cis- or trans-adduct. The theoretical studies demonstrate that the steric effects as well as the concentrations of CH3OH must have a dominant role in determining the yields of the final adducts by stereochemistry. The same mechanism for the carbon derivative (1-C) is also considered in this work. However, the theoretical results indicate that 1-C does not undergo a methanol addition reaction via the photochemical reaction pathway, since its energy of conical intersection (S1/S0-CI-C) is more than that of its FC (FC-C). The reason for these phenomena could be that the atomic radius of carbon is much smaller than that of silicon (77 and 117 pm, respectively). As a result, the conformation for 1-C is more sterically congested than that for 1-Si, along the 1,3-silyl-migration pathway. PMID:26928893

  2. Pain perception and hypnosis: findings from recent functional neuroimaging studies.

    PubMed

    Del Casale, Antonio; Ferracuti, Stefano; Rapinesi, Chiara; Serata, Daniele; Caltagirone, Saverio Simone; Savoja, Valeria; Piacentino, Daria; Callovini, Gemma; Manfredi, Giovanni; Sani, Gabriele; Kotzalidis, Georgios D; Girardi, Paolo

    2015-01-01

    Hypnosis modulates pain perception and tolerance by affecting cortical and subcortical activity in brain regions involved in these processes. By reviewing functional neuroimaging studies focusing on pain perception under hypnosis, the authors aimed to identify brain activation-deactivation patterns occurring in hypnosis-modulated pain conditions. Different changes in brain functionality occurred throughout all components of the pain network and other brain areas. The anterior cingulate cortex appears to be central in modulating pain circuitry activity under hypnosis. Most studies also showed that the neural functions of the prefrontal, insular, and somatosensory cortices are consistently modified during hypnosis-modulated pain conditions. Functional neuroimaging studies support the clinical use of hypnosis in the management of pain conditions. PMID:25719519

  3. Additive prognostic value of coronary artery calcium score and renal function in patients with acute chest pain without known coronary artery disease: up to 5-year follow-up.

    PubMed

    Chaikriangkrai, Kongkiat; Nabi, Faisal; Mahmarian, John J; Chang, Su Min

    2015-12-01

    Long-term incremental prognostic value of renal function over coronary artery calcium score (CACS) in symptomatic patients without known coronary artery disease (CAD) is unclear. The objective of this study was to examine additive prognostic value of renal function over CACS in patients with acute chest pain suspected of CAD. Renal function and CACS were assessed in patients without known CAD who presented to the emergency department with chest pain from 2005 to 2008. Renal function was assessed using estimated glomerular filtration rate (eGFR), and chronic kidney disease (CKD) was defined as eGFR < 60 mL/min/1.73 m(2). A total of 949 patients (804 non-CKD and 145 CKD, age 54 ± 13 years) were included. During the follow-up period of up to 5.3 years, major adverse cardiac events (MACE) occurred in 5.7% of patients (19 cardiac deaths, 6 myocardial infarction and 29 late coronary revascularization). Annualized MACE rate was higher in patients in higher CACS categories with and without CKD (p = 0.011 and p < 0.001 respectively). In multivariate logistic regression analysis, CACS categories (CACS 1-100: HR 3.17, p = 0.005; CACS 101-400: HR 7.68, p < 0.001; CACS > 400: HR 8.88, p < 0.001) and CKD (HR 10.18, p < 0.001) were independent predictors for MACE. Both adding renal function and CACS significantly improved the overall predictive performance (p < 0.001 for global Chi square increase) from Framingham risk categories or thrombolysis in myocardial infarction (TIMI) risk score. Both CACS and renal function were independent predictors for future cardiac events and provided additive prognostic value to each other and over either Framingham risk categories or TIMI risk score. PMID:26243534

  4. Sexual Function after Partial Penectomy: A Prospectively Study From China.

    PubMed

    Yu, Cui; Hequn, Chen; Longfei, Liu; Minfeng, Chen; Zhi, Chen; Feng, Zeng; Jinbo, Chen; Lin, Qi; Xiongbing, Zu

    2016-01-01

    The Purpose of this study was to evaluate the sexual function after partial penectomy for penile carcinoma patients. Between January 2010 and May 2013, patients treated with partial penectomy at our institution were prospectively enrolled in this study. Sexual function (IIEF-15), age, body mass index, penile length in the flaccid state after partial penectomy (PL), treatment, having a partner and psychological factors (SAS scores and SDS scores) were assessed. Univariate and multivariate linear regression analyses were performed. 43 patients were included in our study. The median age was 56 years, and the median PL was 4 cm. The preoperative IIEF-15, SAS, SDS scores were significantly different from the postoperative scores. There was no statistically significant difference between the patients treated with partial penectomy and partial penectomy+ lymphadenectomy on IIEF-15 scores. Age was negatively associated with erectile function, sexual desire, and overall satisfaction; PL was positively associated with intercourse satisfaction; SAS score was negatively associated with erectile function, orgasmic function, sexual desire, and intercourse satisfaction. Our preliminary findings suggest that the sexual function after partial penectomy was significantly reduced. The sexual function was negatively affected by age and anxiety but positively affected by PL. PMID:26902397

  5. Sexual Function after Partial Penectomy: A Prospectively Study From China

    PubMed Central

    Yu, Cui; Hequn, Chen; Longfei, Liu; Minfeng, Chen; Zhi, Chen; Feng, Zeng; Jinbo, Chen; Lin, Qi; Xiongbing, Zu

    2016-01-01

    The Purpose of this study was to evaluate the sexual function after partial penectomy for penile carcinoma patients. Between January 2010 and May 2013, patients treated with partial penectomy at our institution were prospectively enrolled in this study. Sexual function (IIEF-15), age, body mass index, penile length in the flaccid state after partial penectomy (PL), treatment, having a partner and psychological factors (SAS scores and SDS scores) were assessed. Univariate and multivariate linear regression analyses were performed. 43 patients were included in our study. The median age was 56 years, and the median PL was 4 cm. The preoperative IIEF-15, SAS, SDS scores were significantly different from the postoperative scores. There was no statistically significant difference between the patients treated with partial penectomy and partial penectomy+ lymphadenectomy on IIEF-15 scores. Age was negatively associated with erectile function, sexual desire, and overall satisfaction; PL was positively associated with intercourse satisfaction; SAS score was negatively associated with erectile function, orgasmic function, sexual desire, and intercourse satisfaction. Our preliminary findings suggest that the sexual function after partial penectomy was significantly reduced. The sexual function was negatively affected by age and anxiety but positively affected by PL. PMID:26902397

  6. Numerical study on the influence of hydrogen addition on soot formation in a laminar ethylene-air diffusion flame

    SciTech Connect

    Guo, Hongsheng; Liu, Fengshan; Smallwood, Gregory J.; Guelder, OEmer L.

    2006-04-15

    The influence of hydrogen addition to the fuel of an atmosphere pressure coflow laminar ethylene-air diffusion flame on soot formation was studied by numerical simulation. A detailed gas-phase reaction mechanism, which includes aromatic chemistry up to four rings, and complex thermal and transport properties were used. The fully coupled elliptic governing equations were solved. The interactions between soot and gas-phase chemistry were taken into account. Radiation heat transfer from CO{sub 2}, CO, H{sub 2}O, and soot was calculated using the discrete-ordinates method coupled to a statistical narrow-band-correlated K-based wide-band model. The predicted results were compared with the available experimental data and analyzed. It is indicated that the addition of hydrogen to the fuel in an ethylene-air diffusion flame suppresses soot formation through the effects of dilution and chemistry. This result is in agreement with available experiments. The simulations further suggest that the chemically inhibiting effect of hydrogen addition on soot formation is due to the decrease of hydrogen atom concentration in soot surface growth regions and higher concentration of molecular hydrogen in the lower flame region. (author)

  7. Functional neuroimaging studies of the effects of psychotherapy.

    PubMed

    Beauregard, Mario

    2014-03-01

    It has been long established that psychological interventions can markedly alter patients' thinking patterns, beliefs, attitudes, emotional states, and behaviors. Little was known about the neural mechanisms mediating such alterations before the advent of functional neuroimaging techniques. Since the turn of the new millenium, several functional neuroimaging studies have been conducted to tackle this important issue. Some of these studies have explored the neural impact of various forms of psychotherapy in individuals with major depressive disorder. Other neuroimaging studies have investigated the effects of psychological interventions for anxiety disorders. I review these studies in the present article, and discuss the putative neural mechanisms of change in psychotherapy. The findings of these studies suggest that mental and behavioral changes occurring during psychotherapeutic interventions can lead to a normalization of functional brain activity at a global level. PMID:24733972

  8. Functional neuroimaging studies of the effects of psychotherapy

    PubMed Central

    Beauregard, Mario

    2014-01-01

    It has been long established that psychological interventions can markedly alter patients' thinking patterns, beliefs, attitudes, emotional states, and behaviors. Little was known about the neural mechanisms mediating such alterations before the advent of functional neuroimaging techniques. Since the turn of the new millenium, several functional neuroimaging studies have been conducted to tackle this important issue. Some of these studies have explored the neural impact of various forms of psychotherapy in individuals with major depressive disorder. Other neuroimaging studies have investigated the effects of psychological interventions for anxiety disorders. I review these studies in the present article, and discuss the putative neural mechanisms of change in psychotherapy. The findings of these studies suggest that mental and behavioral changes occurring during psychotherapeutic interventions can lead to a normalization of functional brain activity at a global level. PMID:24733972

  9. A study on the effect of the polymeric additive HPMC on morphology and polymorphism of ortho-aminobenzoic acid crystals

    NASA Astrophysics Data System (ADS)

    Simone, E.; Cenzato, M. V.; Nagy, Z. K.

    2016-07-01

    In the present study, the effect of Hydroxy Propyl Methyl Cellulose (HPMC) on the crystallization of ortho-aminobenzoic acid (OABA) was investigated by seeded and unseeded cooling crystallization experiments. The influence of HPMC on the induction time, crystal shape of Forms I and II of OABA and the polymorphic transformation time was studied. Furthermore, the capability of HPMC to inhibit growth of Form I was evaluated quantitatively and modeled using population balance equations (PBE) solved with the method of moments. The additive was found to strongly inhibit nucleation and growth of Form I as well as to increase the time for the polymorphic transformation from Form II to I. Solvent was also found to influence the shape of Form I crystals at equal concentrations of HPMC. In situ process analytical technology (PAT) tools, including Raman spectroscopy, focused beam reflectance measurement (FBRM) and attenuated total reflectance (ATR) UV-vis spectroscopy were used in combination with off-line techniques, such as optical microscopy, scanning electron microscopy (SEM), Raman spectroscopy, Malvern Mastersizer and differential scanning calorimetry (DSC) to study the crystals produced. The results illustrate how shape, size and stability of the two polymorphs of OABA can be controlled and tailored using a polymeric additive.

  10. Three new double-headed nucleotides with additional nucleobases connected to C-5 of pyrimidines; synthesis, duplex and triplex studies.

    PubMed

    Kumar, Pawan; Sharma, Pawan K; Hansen, Jonas; Jedinak, Lukas; Reslow-Jacobsen, Charlotte; Hornum, Mick; Nielsen, Poul

    2016-02-15

    In the search for double-coding DNA-systems, three new pyrimidine nucleosides, each coded with an additional nucleobase anchored to the major groove face, are synthesized. Two of these building blocks carry a thymine at the 5-position of 2'-deoxyuridine through a methylene linker and a triazolomethylene linker, respectively. The third building block carries an adenine at the 6-position of pyrrolo-2'-deoxycytidine through a methylene linker. These double-headed nucleosides are introduced into oligonucleotides and their effects on the thermal stabilities of duplexes are studied. All studied double-headed nucleotide monomers reduce the thermal stability of the modified duplexes, which is partially compensated by using consecutive incorporations of the modified monomers or by flanking the new double-headed analogs with members of our former series containing propyne linkers. Also their potential in triplex-forming oligonucleotides is studied for two of the new double-headed nucleotides as well as the series of analogs with propyne linkers. The most stable triplexes are obtained with single incorporations of additional pyrimidine nucleobases connected via the propyne linker. PMID:26778611

  11. A SEARCH FOR ADDITIONAL PLANETS IN FIVE OF THE EXOPLANETARY SYSTEMS STUDIED BY THE NASA EPOXI MISSION

    SciTech Connect

    Ballard, Sarah; Charbonneau, David; Holman, Matthew J.; Christiansen, Jessie L.; Deming, Drake; Barry, Richard K.; Kuchner, Marc J.; Livengood, Timothy A.; Hewagama, Tilak; Hampton, Don L.; Lisse, Carey M.; Seager, Sara; Veverka, Joseph F.

    2011-05-01

    We present time series photometry and constraints on additional planets in five of the exoplanetary systems studied by the EPOCh (Extrasolar Planet Observation and Characterization) component of the NASA EPOXI mission: HAT-P-4, TrES-3, TrES-2, WASP-3, and HAT-P-7. We conduct a search of the high-precision time series for photometric transits of additional planets. We find no candidate transits with significance higher than our detection limit. From Monte Carlo tests of the time series using putative periods from 0.5 days to 7 days, we demonstrate the sensitivity to detect Neptune-sized companions around TrES-2, sub-Saturn-sized companions in the HAT-P-4, TrES-3, and WASP-3 systems, and Saturn-sized companions around HAT-P-7. We investigate in particular our sensitivity to additional transits in the dynamically favorable 3:2 and 2:1 exterior resonances with the known exoplanets: if we assume coplanar orbits with the known planets, then companions in these resonances with HAT-P-4b, WASP-3b, and HAT-P-7b would be expected to transit, and we can set lower limits on the radii of companions in these systems. In the nearly grazing exoplanetary systems TrES-3 and TrES-2, additional coplanar planets in these resonances are not expected to transit. However, we place lower limits on the radii of companions that would transit if the orbits were misaligned by 2.{sup 0}0 and 1.{sup 0}4 for TrES-3 and TrES-2, respectively.

  12. Methyl iodide oxidative addition to [Rh(acac)(CO)(PPh3)]: an experimental and theoretical study of the stereochemistry of the products and the reaction mechanism.

    PubMed

    Conradie, Marrigje M; Conradie, Jeanet

    2011-08-28

    Density functional theory was used to investigate the oxidative addition and subsequent carbonyl insertion and deinsertion steps of the reaction of methyl iodide to a rhodium(I) acetylacetonato complex of the formula [Rh(acac)(CO)(PPh(3))] (Hacac = acetylacetone). This process has been studied experimentally for many rhodium β-diketonato complexes, but, to the best of our knowledge, this is the first systematic computational study of the complete reaction sequence. Experimental (1)H techniques complement the theoretical results on the stereochemistry of the reaction intermediates and products. (1)H NMR also revealed the existence of a second rhodium(III)-acyl product, which has not been previously observed in this reaction. The calculated Gibbs free energy of activation of the oxidative addition reaction is 71 kJ mol(-1), which is in agreement with the experimental value of 82(1) kJ mol(-1). The DFT-calculated oxidative addition corresponds to an associative S(N)2 nucleophilic attack by the rhodium metal centre on the methyl iodide, which is in agreement with calculated and experimental (in brackets) activation parameters of the reaction, 27 (38.8) kJ mol(-1) for ΔH((≠)) and -147 (-146) J K(-1) mol(-1) for ΔS((≠)). PMID:21761056

  13. Pulmonary function in asbestos cement workers: a dose-response study.

    PubMed Central

    Finkelstein, M

    1986-01-01

    This study has found that residence time weighted exposure (asbestos dose) may be used to model the risk and extent of pulmonary function abnormalities in a cohort of asbestos cement workers. This parameter, which incorporates both exposure concentration and latency, had previously proved useful for modelling the risk of radiographic abnormalities in this cohort. Asbestos dose and smoking were independent and additive contributors to decreased pulmonary function. It was also found that lung function results could be used as surrogates for dose in the assessment of mortality risk in this cohort. PMID:3718885

  14. Can additional urban development have major impacts on streamflow of a peri-urban catchment? A case study from Portugal

    NASA Astrophysics Data System (ADS)

    Ferreira, Carla; Walsh, Rory; Nunes, João; Steenhuis, Tammo; de Lima, João; Coelho, Celeste; Ferreira, António

    2016-04-01

    It is well known that urban development brings about changes in hydrological response. Relatively little, however, is known about impacts on streamflow during urban development in the Mediterranean climate. This paper examines changes in streamflow resulting from the construction of an enterprise park, a major road and apartment blocks in a small partially urbanized peri-urban catchment (6.2 km2) in central Portugal. These developments led to an increase in urban area from 32% to 40% over a five-year period (hydrological years 2008/09-2012/13). In the initial two-year period minor land-use changes increased impervious surfaces from 12.8% to 13.2%. The subsequent three-year period led to a further 17.2% increase in impervious area. Streamflow was recorded by a V-notch weir at the catchment outlet. Rainfall was recorded at a weather station 0.5km north of the catchment, and by five tipping-bucket raingauges installed in January 2011 within the study catchment. Annual runoff and storm runoff coefficients ranged from 14% to 21% and 9% to 14%, respectively, recorded in 2011/12 and 2012/13. Although these differences in runoff were caused in part by variation in rainfall, the comparison between 2009/10 (pre-) and 2012/13 (post-additional urban development), with broadly similar rainfall (887mm vs 947mm, respectively) and evapotranspiration (740mm vs 746mm), showed a 43% increase in storm runoff (from 90mm to 129mm), resulting from additional overland flow generated largely by the 4.4% increase in impervious surfaces. The additional urban development also led to changes in hydrograph parameters. The increase in storm runoff was not progressive over the study period, but regression lines of storm runoff against rainstorm parameters exhibited higher vertical positions in 2012/13 than 2008/09. Increasing peak flows, however, were more progressive over the study period, with annual regression lines displaying higher vertical positions, but with a clear distance between pre

  15. [Value of functional and electrophysiological studies in amblyopia].

    PubMed

    Korol, S; Fiore, C

    1976-04-01

    In a group of patients suffering from amblyopia, the authors confront the results after orthoptic treatment with data provided by functional and electrophysiological examination. In 37 patients the clinical diagnosis of functional amblyopia had been made, but in 8 of these cases complimentary functional and electrophysiological examinations showed organic perturbations. This explains the failure, in these cases, of the orthoptic treatment. In the remaining 29 patients, clinical forms of functional amblyopia were found. In this group, the authors studied 20 cases showing no improvement with treatment: in 15 out of the 20 the VERs were pathological. In the 9 remaining cases which have showed improvement the VER'S were never abnormal. VER study can be undertaken, without general anaesthesia, as from 3 to 4 years of age. The authors conclude that all clinical forms of amblyopia should undergo VER investigation: patients showing pathological changes should be excluded from orthoptic treatment, from which they have no possibility of deriving benefit. PMID:135545

  16. Meta-analysis of high-latitude nitrogen-addition and warming studies imply ecological mechanisms overlooked by land models

    DOE PAGESBeta

    Bouskill, N. J.; Riley, W. J.; Tang, J.

    2014-08-18

    Accurate representation of ecosystem processes in land models is crucial for reducing predictive uncertainty in energy and greenhouse gas feedbacks with the atmosphere. Here we describe an observational and modeling meta-analysis approach to benchmark land models, and apply the method to the land model CLM4.5 with two versions of belowground biogeochemistry. We focused our analysis on the above and belowground high-latitude ecosystem responses to warming and nitrogen addition, and identified mechanisms absent, or poorly parameterized in CLM4.5. While the two model versions predicted similar trajectories for soil carbon stocks following both types of perturbation, other variables (e.g., belowground respiration) differedmore » from the observations in both magnitude and direction, indicating the underlying mechanisms are inadequate for representing high-latitude ecosystems. The observational synthesis attribute these differences to missing representations of microbial dynamics, characterization of above and belowground functional processes, and nutrient competition. We use the observational meta-analyses to discuss potential approaches to improving the current models (e.g., the inclusion of dynamic vegetation or different microbial functional guilds), however, we also raise a cautionary note on the selection of data sets and experiments to be included in a meta-analysis. For example, the concentrations of nitrogen applied in the synthesized field experiments (average =72 kg ha-1 yr-1) are many times higher than projected soil nitrogen concentrations (from nitrogen deposition and release during mineralization), which preclude a rigorous evaluation of the model responses to nitrogen perturbation. Overall, we demonstrate here that elucidating ecological mechanisms via meta-analysis can identify deficiencies in both ecosystem models and empirical experiments.« less

  17. Structure Function Studies of Vaccinia Virus Host Range Protein K1 Reveal a Novel Functional Surface for Ankyrin Repeat Proteins

    SciTech Connect

    Li, Yongchao; Meng, Xiangzhi; Xiang, Yan; Deng, Junpeng

    2010-06-15

    Poxvirus host tropism at the cellular level is regulated by virus-encoded host range proteins acting downstream of virus entry. The functioning mechanisms of most host range proteins are unclear, but many contain multiple ankyrin (ANK) repeats, a motif that is known for ligand interaction through a concave surface. We report here the crystal structure of one of the ANK repeat-containing host range proteins, the vaccinia virus K1 protein. The structure, at a resolution of 2.3 {angstrom}, showed that K1 consists entirely of ANK repeats, including seven complete ones and two incomplete ones, one each at the N and C terminus. Interestingly, Phe82 and Ser83, which were previously shown to be critical for K1's function, are solvent exposed and located on a convex surface, opposite the consensus ANK interaction surface. The importance of this convex surface was further supported by our additional mutagenesis studies. We found that K1's host range function was negatively affected by substitution of either Asn51 or Cys47 and completely abolished by substitution of both residues. Cys47 and Asn51 are also exposed on the convex surface, spatially adjacent to Phe82 and Ser83. Altogether, our data showed that K1 residues on a continuous convex ANK repeat surface are critical for the host range function, suggesting that K1 functions through ligand interaction and does so with a novel ANK interaction surface.

  18. Structure Function Studies of Vaccinia Virus Host Range Protein K1 Reveal a Novel Functional Surface for Ankyrin Repeat Proteins▿

    PubMed Central

    Li, Yongchao; Meng, Xiangzhi; Xiang, Yan; Deng, Junpeng

    2010-01-01

    Poxvirus host tropism at the cellular level is regulated by virus-encoded host range proteins acting downstream of virus entry. The functioning mechanisms of most host range proteins are unclear, but many contain multiple ankyrin (ANK) repeats, a motif that is known for ligand interaction through a concave surface. We report here the crystal structure of one of the ANK repeat-containing host range proteins, the vaccinia virus K1 protein. The structure, at a resolution of 2.3 Å, showed that K1 consists entirely of ANK repeats, including seven complete ones and two incomplete ones, one each at the N and C terminus. Interestingly, Phe82 and Ser83, which were previously shown to be critical for K1's function, are solvent exposed and located on a convex surface, opposite the consensus ANK interaction surface. The importance of this convex surface was further supported by our additional mutagenesis studies. We found that K1's host range function was negatively affected by substitution of either Asn51 or Cys47 and completely abolished by substitution of both residues. Cys47 and Asn51 are also exposed on the convex surface, spatially adjacent to Phe82 and Ser83. Altogether, our data showed that K1 residues on a continuous convex ANK repeat surface are critical for the host range function, suggesting that K1 functions through ligand interaction and does so with a novel ANK interaction surface. PMID:20089642

  19. Study of Fluorine Addition Influence in the Dielectric Constant of Diamond-Like Carbon Thin Film Deposited by Reactive Sputtering

    NASA Astrophysics Data System (ADS)

    Trippe, S. C.; Mansano, R. D.

    The hydrogenated amorphous carbon films (a-C:H) or DLC (Diamond-Like Carbon) films are well known for exhibiting high electrical resistivity, low dielectric constant, high mechanical hardness, low friction coefficient, low superficial roughness and also for being inert. In this paper, we produced fluorinated DLC films (a-C:F), and studied the effect of adding CF4 on the above-mentioned properties of DLC films. These films were produced by a reactive RF magnetron sputtering system using a target of pure carbon in stable graphite allotrope. We performed measurements of electrical characteristic curves of capacitance as a function of applied tension (C-V) and current as a function of the applied tension (I-V). We showed the dielectric constant (k) and the resistivity (ρ) as functions of the CF4 concentration. On films with 65% CF4, we found that k = 2.7, and on films with 70% CF4, ρ = 12.3 × 1011 Ω cm. The value of the electrical breakdown field to films with 70% CF4 is 5.3 × 106 V/cm.

  20. Functional neuroimaging studies of post-traumatic stress disorder

    PubMed Central

    Hughes, Katherine C; Shin, Lisa M

    2011-01-01

    Post-traumatic stress disorder (PTSD) is a significant problem that can affect individuals who have been exposed to a traumatic event or events, such as combat, violent crime or childhood abuse. Over the past several years, neuroimaging studies of PTSD have focused on elucidating the brain circuits that mediate this disorder. In this article, we will briefly introduce some of the methods used in functional neuroimaging studies of PTSD. We will then review functional neuroimaging studies that have reported significant findings in the amygdala, medial prefrontal cortex, hippocampus and insula. Finally, we will suggest future directions for research. PMID:21306214

  1. Comparative study on adhesive performance of functional monomers.

    PubMed

    Yoshida, Y; Nagakane, K; Fukuda, R; Nakayama, Y; Okazaki, M; Shintani, H; Inoue, S; Tagawa, Y; Suzuki, K; De Munck, J; Van Meerbeek, B

    2004-06-01

    Mild self-etch adhesives demineralize dentin only partially, leaving hydroxyapatite around collagen within a submicron hybrid layer. We hypothesized that this residual hydroxyapatite may serve as a receptor for chemical interaction with the functional monomer and, subsequently, contribute to adhesive performance in addition to micro-mechanical hybridization. We therefore chemically characterized the adhesive interaction of 3 functional monomers with synthetic hydroxyapatite, using x-ray photoelectron spectroscopy and atomic absorption spectrophotometry. We further characterized their interaction with dentin ultra-morphologically, using transmission electron microscopy. The monomer 10-methacryloxydecyl dihydrogen phosphate (10-MDP) readily adhered to hydroxyapatite. This bond appeared very stable, as confirmed by the low dissolution rate of its calcium salt in water. The bonding potential of 4-methacryloxyethyl trimellitic acid (4-MET) was substantially lower. The monomer 2-methacryloxyethyl phenyl hydrogen phosphate (phenyl-P) and its bond to hydroxyapatite did not appear to be hydrolytically stable. Besides self-etching dentin, specific functional monomers have additional chemical bonding efficacy that is expected to contribute to their adhesive potential to tooth tissue. PMID:15153451

  2. Cortical Bases of Speech Perception: Evidence from Functional Lesion Studies

    ERIC Educational Resources Information Center

    Boatman, Dana

    2004-01-01

    Functional lesion studies have yielded new information about the cortical organization of speech perception in the human brain. We will review a number of recent findings, focusing on studies of speech perception that use the techniques of electrocortical mapping by cortical stimulation and hemispheric anesthetization by intracarotid amobarbital.…

  3. Appearance Investment and Everyday Interpersonal Functioning: An Experience Sampling Study

    ERIC Educational Resources Information Center

    Forand, Nicholas R.; Gunthert, Kathleen C.; German, Ramaris E.; Wenze, Susan J.

    2010-01-01

    Several studies have shown that body satisfaction affects interpersonal functioning. However, few have studied the specific interpersonal correlates of another important body image dimension, appearance investment--that is, the importance a woman places on appearance. We used an experience sampling design with PDA (personal digital assistant)…

  4. Study on the Reutilization of Clear Fracturing Flowback Fluids in Surfactant Flooding with Additives for Enhanced Oil Recovery (EOR)

    PubMed Central

    Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

    2014-01-01

    An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10−3 mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical. PMID:25409507

  5. Experimental study on the characteristics of ventilated cavitation around an underwater navigating body influenced by turbulent drag-reducing additives

    NASA Astrophysics Data System (ADS)

    Jiang, ChenXing; Li, FengChen

    2015-09-01

    In this study, a new control strategy for turbulent drag reduction involving ventilated cavitation is proposed. The configurational and hydrodynamic characteristics of ventilated cavities influenced by turbulent drag-reducing additives were experimentally studied in water tunnel. The test model was fixed in the water tunnel by a strut in the aft-part. Aqueous solutions of CTAC/NaSal (cetyltrimethyl ammonium chloride/sodium salicylate) with weight concentrations of 100, 200, 400 and 600 ppm (part per million), respectively, were injected into the ventilated air cavity from the edge of the cavitator with accurate control by an injection pump. The cavity configurations were recorded by a high-speed CCD camera. The hydrodynamic characteristics of the test model were measured by a six-component balance. Experimental results show that, within the presently tested cases, the lengths of cavity influenced by drag-reducing solution are smaller than normal condition (ventilated cavity) in water, but the asymmetry of the cavity is improved. The drag resisted by the test model is reduced dramatically (the maximum drag reduction can reach to 80%) and the re-entrant jet is more complex after the CTAC solution is injected into the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitating asymmetry and further drag reduction.

  6. [Study on the spectra of Au/CeO2 catalysts modified by La2O3 additive].

    PubMed

    Zhang, Qing; He, Zhen-Liang; Li, Jin-Wei; Zhan, Ying-Ying; Lin, Xing-Yi; Zheng, Qi

    2008-04-01

    For Au-ceria catalysts prepared by deposition-precipitation method, the catalytic performance of water gas shift reaction was studied with different La loadings. In the complete doping range, ceria retains with its cubic fluorite structures. XRD, HRTEM and UV-Vis-DRS, studies showed that La doping can improve the activity of Au-ceria catalyst by stabilizing ceria and modifying its morphology. In addition, the test of catalyst stability evaluation also proved, that a better stability performance of Au-ceria catalyst can be realized by appropriate La doping. The Au/CL5.0 sample with 5 at % La doping showed the best performance in WGS reaction. PMID:18619331

  7. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Ding, Yaoyu; Kovacevic, Radovan

    2016-05-01

    Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

  8. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Ding, Yaoyu; Kovacevic, Radovan

    2016-07-01

    Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

  9. Hazard and risk assessment of a nanoparticulate cerium oxide-based diesel fuel additive - a case study.

    PubMed

    Park, Barry; Donaldson, Kenneth; Duffin, Rodger; Tran, Lang; Kelly, Frank; Mudway, Ian; Morin, Jean-Paul; Guest, Robert; Jenkinson, Peter; Samaras, Zissis; Giannouli, Myrsini; Kouridis, Haris; Martin, Patricia

    2008-04-01

    Envirox is a scientifically and commercially proven diesel fuel combustion catalyst based on nanoparticulate cerium oxide and has been demonstrated to reduce fuel consumption, greenhouse gas emissions (CO(2)), and particulate emissions when added to diesel at levels of 5 mg/L. Studies have confirmed the adverse effects of particulates on respiratory and cardiac health, and while the use of Envirox contributes to a reduction in the particulate content in the air, it is necessary to demonstrate that the addition of Envirox does not alter the intrinsic toxicity of particles emitted in the exhaust. The purpose of this study was to evaluate the safety in use of Envirox by addressing the classical risk paradigm. Hazard assessment has been addressed by examining a range of in vitro cell and cell-free endpoints to assess the toxicity of cerium oxide nanoparticles as well as particulates emitted from engines using Envirox. Exposure assessment has taken data from modeling studies and from airborne monitoring sites in London and Newcastle adjacent to routes where vehicles using Envirox passed. Data have demonstrated that for the exposure levels measured, the estimated internal dose for a referential human in a chronic exposure situation is much lower than the no-observed-effect level (NOEL) in the in vitro toxicity studies. Exposure to nano-size cerium oxide as a result of the addition of Envirox to diesel fuel at the current levels of exposure in ambient air is therefore unlikely to lead to pulmonary oxidative stress and inflammation, which are the precursors for respiratory and cardiac health problems. PMID:18444008

  10. In-situ study of the influence of additives on the growth behavior of copper electrodeposits on copper single crystal

    NASA Astrophysics Data System (ADS)

    Wu, Aiwen

    Trace organic additives are known to be essential in obtaining desired metal electrodeposits in the microelectronic industry, however, fundamental design principles for their use and a scientific understanding of their interaction during electrodeposition is lacking. In the present study we investigated electrodeposition of copper on the Cu(100) surface in air-saturated or dearated acid-sulfate plating solutions containing several combinations of chloride and additives benzotriazole (BTA) and 3-mercapto propane sulfonic acid (MPSA) under galvanostatic pulse-current conditions. The electrodeposition process was followed using in-situ atomic force microscopy (AFM). AFM images were quantitatively analyzed by pattern-recognition and scaling procedures. In the absence of additives, copper deposits grew in a layer-by-layer mode from the earliest stage of deposition. The surface consisted of smooth terraces separated by steps. The scaling analysis result was consistent with a process dominated by surface diffusion and step growth. In chloride containing solutions, square-pyramidal mounds were initiated and grew to cover the surface. Mound slope increased with deposition time with no indication of reaching a steady-state value. This growth mode was consistent with a surface diffusion mechanism. The scaling result was similar to the additive-free system, but indicated that surface diffusion was more dominant in the presence of chloride. BTA inhibited the surface and produced nucleation-limited growth at hemispheroidal centers whose height to base radius aspect ratio increased linearly with deposition time. Nucleation and growth of three-dimensional nodules started randomly across the entire surface. The nodules were smaller in size than the mounds observed without BTA. The number and density of nodules were much higher than the mounds density. The deposit growth was dominated by a roughening mechanism that can be described by the random roughening term of a stochastic model

  11. Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production

    PubMed Central

    Tufail, Soban; Ismat, Fouzia; Imran, Muhammad; Iqbal, Mazhar; Mirza, Osman; Rhaman, Moazur

    2016-01-01

    Proteases are widely used to remove affinity and solubility tags from recombinant proteins to avoid potential interference of these tags with the structure and function of the fusion partner. In recent years, great interest has been seen in use of the human rhinovirus 3C protease owing to its stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious and time-consuming procedures before proteolysis can occur. To address this issue, we examined the effect of elution buffers used for common affinity based purifications, salt ions, stability/solubility and reducing agents, and detergents on the activity of the human rhinovirus 3C protease using three different fusion proteins at 4°C, a temperature of choice for purification of many proteins. The results show that the human rhinovirus 3C protease performs better at 4°C than the frequently used tobacco etch virus protease and its activity was insensitive to most of the experimental conditions tested. Though number of fusion proteins tested is limited, we expect that these finding will facilitate the use of the human rhinovirus 3C protease in recombinant protein production for pharmaceutical and biotechnological applications. PMID:27093053

  12. Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production.

    PubMed

    Ullah, Raheem; Shah, Majid Ali; Tufail, Soban; Ismat, Fouzia; Imran, Muhammad; Iqbal, Mazhar; Mirza, Osman; Rhaman, Moazur

    2016-01-01

    Proteases are widely used to remove affinity and solubility tags from recombinant proteins to avoid potential interference of these tags with the structure and function of the fusion partner. In recent years, great interest has been seen in use of the human rhinovirus 3C protease owing to its stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious and time-consuming procedures before proteolysis can occur. To address this issue, we examined the effect of elution buffers used for common affinity based purifications, salt ions, stability/solubility and reducing agents, and detergents on the activity of the human rhinovirus 3C protease using three different fusion proteins at 4°C, a temperature of choice for purification of many proteins. The results show that the human rhinovirus 3C protease performs better at 4°C than the frequently used tobacco etch virus protease and its activity was insensitive to most of the experimental conditions tested. Though number of fusion proteins tested is limited, we expect that these finding will facilitate the use of the human rhinovirus 3C protease in recombinant protein production for pharmaceutical and biotechnological applications. PMID:27093053

  13. First-principles study of the covalently functionalized graphene

    NASA Astrophysics Data System (ADS)

    Jha, Sanjiv Kumar

    Theoretical investigations of nanoscale systems, such as functionalized graphene, present major challenges to conventional computational methods employed in quantum chemistry and solid state physics. The properties of graphene can be affected by chemical functionalization. The surface functionalization of graphene offers a promising way to increase the solubility and reactivity of graphene for use in nanocomposites and chemical sensors. Covalent functionalization is an efficient way to open band-gap in graphene for applications in nanoelectronics. We apply ab initio computational methods based on density functional theory to study the covalent functionalization of graphene with benzyne (C6H4), tetracyanoethylene oxide (TCNEO), and carboxyl (COOH) groups. Our calculations are carried out using the SIESTA and Quantum-ESPRESSO electronic structure codes combined with the generalized gradient (GGA) and local density approximations (LDA) for the exchange correlation functionals and norm-conserving Troullier-Martins pseudopotentials. Calculated binding energies, densities of states (DOS), band structures, and vibrational spectra of functionalized graphene are analyzed in comparison with the available experimental data. Our calculations show that the reactions of [2 + 2] and [2 + 4] cycloaddition of C6H4 to the surface of pristine graphene are exothermic, with binding energies of --0.73 eV and --0.58 eV, respectively. Calculated band structures indicate that the [2 + 2] and [2 + 4] attachments of benzyne results in opening small band gap in graphene. The study of graphene--TCNEO interactions suggests that the reaction of cycloaddition of TCNEO to the surface of pristine graphene is endothermic. On the other hand, the reaction of cycloaddition of TCNEO is found to be exothermic for the edge of an H-terminated graphene sheet. Simulated Raman and infrared spectra of graphene functionalized with TCNEO are consistent with experimental results. The Raman (non-resonant) and

  14. [Study on chromosomes aberration in wheat-rye disomics addition lines induced by the gametocidal chromosome 2C].

    PubMed

    Sun, Zhong-Ping; Wang, Zhan-Bin; Xu, Xiang-Ling; Li, Ji-Lin

    2004-11-01

    In the present study,Chinese Spring-Imperial (1 R-7R) wheat-rye disomic addition lines were hybridized with Chinese Spring-2C (derived from Aegilops cylindrica) disomic addition lines. The F1 hybrids were examined by mitotic and meiotic analysis. There were observed abnormal chromosome configurations. A total of 430 F2 plants were obtained by self-pollination. Chromosomes aberrations, such as translocation, deletions, isobrachial and dicentromere chromosomes, are identified in F2 individual plants by C-banding combined with fluorescent in situ hybridization (FISH). Additionally, chromosome spontaneous substitutions such as 2C substituting for wheat chromosomes 2A, 2B and 2D were also observed. The rule and frequency of chromosome aberration in F2 are the following: 22 out of 430 F2 plants (5.11%) were found involving aberration rye chromosomes. Among them, 10 plants were identified as wheat-rye chromosome translocation lines comprising 2.3%. Rye chromosome deletions comprised 12 of them (2.79%). 3 isobrachial aberrations were detected (about 0.7%), too. Most of the translocation lines are with wheat centromere, only one of them is with rye centromere. Rye chromosome aberrations occurred unevenly among homoeologous groups. There were 5 in 1R, 3 in 2R, 1 in 3R, 3 in 4R, 6 in 5R and 4 in 6R. The majority of the translocation lines are terminal translocation. 54 out of the total 430 progenies are wheat deletions,and 27 are distributed in the A group, 20 in the B group and 7 in the D group respectively. Finally,we discussed the possible cause for the uneven chromosome aberration among homoeologous groups in wheat and rye as well as the effect characteristics of 2C on wheat and rye chromosome. PMID:15651680

  15. Study of sorption of two sulfonylurea type of herbicides and their additives on soils and soil components.

    PubMed

    Földényi, Rita; Tóth, Zoltán; Samu, Gyöngyi; Érsek, Csaba

    2013-01-01

    The sorption of two sulfonylurea type herbicides (chlorsulfuron: (1-(2-chlorophenylsulfonyl)-3-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)urea; tribenuron methyl: (methyl-2-[N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-3-(methyl-ureido)-sulfonyl]-benzoate) was studied on sand and chernozem soil adsorbents. Experimental results for solutions prepared from the pure ingredients were compared to those prepared from the appropriate formulated commercial products. At small concentrations, the extent of adsorption of the active ingredient was higher than from the formulation containing solutions. Environmental fate and effects of the forming agents are less investigated because they rarely have concentration limits recommended by authorities. In addition to the adsorption of active ingredients, therefore, the sorption behavior of a widely used additive Supragil WP (sodium diisopropyl naphthalene sulphonate) was also studied. This dispersant is an anionic forming agent applied in a lot of pesticide formulations. Using three different soils (sand, brown forest, chernozem) as adsorbents two-step isotherms were obtained. The role of the soil organic matter (OM) was significant in the adsorption mechanism because the adsorbed amounts of the dispersant correlated with the specific surface area as well as with the total organic carbon (TOC) content of the soils. The sorption behavior indicates the operation of hydrophobic interaction mechanism between the soil OM and the dispersant. These results are supported by our further sorption experiments on clays, too. Zeta potential measurements seem to be promising for the interpretation of multi-step isotherms. The application of this technique proved that higher concentrations of the anionic forming agent assisted the peptization of soil organic matter (SOM) resulting in stable colloidal solution dominated by negative charges. Since the pesticides investigated are also anionic at the studied pH (7 and 8.3) the dissolved organics lead to the

  16. A Thrust and Impulse Study of Guanidinium Azo-Tetrazolate as an Additive for Hybrid Rocket Fuel

    NASA Astrophysics Data System (ADS)

    Patton, J.; Wright, A. M.; Dunn, L.; Alford, B.

    2000-03-01

    A thrust and impulse study of the hybrid rocket fuel additive Guanidinium Azo-Tetrazolate (GAT) was conducted at the University of Arkansas at Little Rock (UALR) Hybrid Rocket Facility. GAT is an organic salt with a high percentage of nitrogen. GAT was mixed with the standard hybrid rocket fuel, Hydroxyl-Terminated Polybutadiene (HTPB), in the concentration of 15%, by mass. The fuel grains with the GAT additive were fired for 4 second runs with the oxygen flows of 0.05, 0.07, 0.09, and 0.12 lbm/sec. For each run average thrust, total impulse, and specific impulse were measured. Average thrust, specific impulse, and total impulse vs. oxygen flow were plotted. Similar data was collected for plain HTPB/PAPI fuels for comparison. GAT was found to increase the thrust output when it was added to the standard hybrid rocket fuel, HTPB. GAT also increased the total impulse during the run. The thrust and total impulse were increased at all flows, but especially at the lower oxygen flow rates. Specific impulse only increased during the lower oxygen flow runs, and decreased slightly for the higher oxygen flow runs.

  17. Influence of CuO and ZnO addition on the multicomponent phosphate glasses: Spectroscopic studies

    NASA Astrophysics Data System (ADS)

    Szumera, Magdalena; Wacławska, Irena; Sułowska, Justyna

    2016-06-01

    The spectra of phosphate-silicate glasses from the P2O5-SiO2-K2O-MgO-CaO system modified with the addition of CuO or ZnO have been studied by means of FTIR, Raman and 31P MAS NMR spectroscopy. All glasses were synthesized by the conventional melt-quenching technique and their homogeneous chemical composition was controlled and confirmed. By using the aforementioned research techniques, the presence of structural units with various degrees of polymerization was shown in the structure of analyzed phosphate-silicate glasses: Q3, Q2, Q1 and Q0. It was found that an increase in the content of CuO or ZnO in the composition of analyzed glasses, which are introduced at the expense of decreasing amounts of CaO and MgO, has a different influence on the phospho-oxygen network. It was shown that copper ions cause its gradual polymerization, while zinc ions cause its depolymerization. At the same time, polymerization of the silico-oxygen subnetwork was found. Additionally, in the case of glasses containing increasing amounts of ZnO, a change of the role of zinc ions in the vitreous matrix was confirmed (from the modifier to a structure-forming component).

  18. Structure–Function Studies of DNA Polymerase λ

    PubMed Central

    2015-01-01

    DNA polymerase λ (pol λ) functions in DNA repair with its main roles considered to be filling short gaps during repair of double-strand breaks by nonhomologous end joining and during base excision repair. As indicated by structural and biochemical studies over the past 10 years, pol λ shares many common properties with other family X siblings (pol β, pol μ, and terminal deoxynucleotidyl transferase) but also has unique structural features that determine its specific functions. In this review, we consider how structural studies over the past decade furthered our understanding of the behavior and biological roles of pol λ. PMID:24716527

  19. Theoretical study for the interlamellar aminoalcohol functionalization of kaolinite

    NASA Astrophysics Data System (ADS)

    Hou, Xin-Juan; Li, Huiquan; Liu, Qinfu; Cheng, Hongfei; He, Peng; Li, Shaopeng

    2015-08-01

    Fundamental problems related to aminoalcohols intercalating on kaolinite were investigated by using density functional theory method. This study examines the adsorption modes of diethanolamine and triethanolamine on kaolinite, the role of hydrogen bonds and van der Waals (vdW) forces between aminoalcohols and interlayer of kaolinite, and the change of molecular orbital occupancies of functionalized kaolinite. Results show that functionalized kaolinite is physically intercalated and covalently grafted by aminoalcohols. Non-covalent interaction analysis provides a visualized description that intercalated aminoalcohols form strong hydrogen bonds with Al octahedral sheet, and the interaction between aminoalcohols and Si tetrahedral sheet is mainly attributed to weak vdW force. The analysis of molecular orbital occupancies for kaolinite complex showed that the functionalized kaolinite has strong chemical reactivity as electron donors on the sites of grafted or intercalated aminoalcohols for further chemical reaction with other materials.

  20. Study on the effect of hydrogen addition on the variation of plasma parameters of argon-oxygen magnetron glow discharge for synthesis of TiO2 films

    NASA Astrophysics Data System (ADS)

    Saikia, Partha; Saikia, Bipul Kumar; Bhuyan, Heman

    2016-04-01

    We report the effect of hydrogen addition on plasma parameters of argon-oxygen magnetron glow discharge plasma in the synthesis of H-doped TiO2 films. The parameters of the hydrogen-added Ar/O2 plasma influence the properties and the structural phases of the deposited TiO2 film. Therefore, the variation of plasma parameters such as electron temperature (Te), electron density (ne), ion density (ni), degree of ionization of Ar and degree of dissociation of H2 as a function of hydrogen content in the discharge is studied. Langmuir probe and Optical emission spectroscopy are used to characterize the plasma. On the basis of the different reactions in the gas phase of the magnetron discharge, the variation of plasma parameters and sputtering rate are explained. It is observed that the electron and heavy ion density decline with gradual addition of hydrogen in the discharge. Hydrogen addition significantly changes the degree of ionization of Ar which influences the structural phases of the TiO2 film.

  1. Altered executive function in the welders: A functional magnetic resonance imaging study.

    PubMed

    Seo, Jeehye; Chang, Yongmin; Jang, Kyung Eun; Park, Jang Woo; Kim, Yang-Tae; Park, Sin-Jae; Jeong, Kyoung Sook; Kim, Ahro; Kim, Suk Hwan; Kim, Yangho

    2016-01-01

    Chronic exposure to manganese (Mn) can lead to impairments in motor and cognitive functions. Several recent studies reported Mn-induced executive dysfunction. The present study compared the neural correlates of ongoing executive function of welders and healthy controls. Fifty-three welders and 44 healthy controls were enrolled. Participants were given functional magnetic resonance imaging (fMRI) scans and performed two modified versions of the Wisconsin Card Sorting Task (WCST) that differed in cognitive demand, and a task that established a high-level baseline (HLB) condition. Card Sorting Test and Word-Color Test were also used to assess executive performance. Neural activation of the bilateral superior-frontal cortex, right-inferior parietal cortex, and bilateral insula cortex were greater in healthy controls than in welders when contrasting the difficult version of the WCST with the HLB. There were also correlations between executive functions by the Card Sorting Test and Word-Color Test, and brain activation in the insula cortex using the WCST. Our results indicated that welders had altered neural processing related to executive function in the prefrontal cortex under conditions of high cognitive demand. Welders also had less activation of the insula cortex, a part of a larger network comprising the lateral prefrontal cortex and parietal cortex. PMID:27208889

  2. Chemotherapy Altered Brain Functional Connectivity in Women with Breast Cancer: A Pilot Study

    PubMed Central

    Dumas, Julie A.; Makarewicz, Jenna; Schaubhut, Geoffrey J.; Devins, Robert; Albert, Kimberly; Dittus, Kim; Newhouse, Paul A.

    2013-01-01

    Adjuvant chemotherapy is associated with improvements in long-term cancer survival. However, reports of cognitive impairment following treatment emphasize the importance of understanding the long-term effects of chemotherapy on brain functioning. Cognitive deficits found in chemotherapy patients suggest a change in brain functioning that affects specific cognitive domains such as attentional processing and executive functioning. This study examined the processes potentially underlying these changes in cognition by examining brain functional connectivity pre- and post-chemotherapy in women with breast cancer. Functional connectivity examines the temporal correlation between spatially remote brain regions in an effort to understand how brain networks support specific cognitive functions. Nine women diagnosed with breast cancer completed a functional magnetic resonance imaging (fMRI) session before chemotherapy, one month after, and one year after the completion of chemotherapy. Seed-based functional connectivity analyses were completed using seeds in the intraparietal sulcus (IPS) to examine connectivity in the dorsal anterior attention network and in the posterior cingulate cortex (PCC) to examine connectivity in the default mode network. Results showed decreased functional connectivity one month after chemotherapy that partially returned to baseline at one year in the dorsal attention network. Decreased connectivity was seen in the default mode network at one month and one year following chemotherapy. In addition, increased subjective memory complaints were noted at one month and one year post-chemotherapy. These findings suggest a detrimental effect of chemotherapy on brain functional connectivity that is potentially related to subjective cognitive assessment. PMID:23852814

  3. The biological functions of miRNAs: lessons from in vivo studies

    PubMed Central

    Vidigal, Joana A.; Ventura, Andrea

    2014-01-01

    Despite their clear importance as a class of regulatory molecules, pinpointing the relevance of individual miRNAs has been challenging. Studies querying miRNA functions by overexpressing or silencing specific miRNAs have yielded data that are often at odds with those collected from loss-of-functions models. In addition, knockout studies suggest that many conserved miRNAs are dispensable for animal development or viability. In this review we discuss these observations in the context of our current knowledge of miRNA biology and review the evidence implicating miRNA-mediated gene regulation in the mechanisms that ensure biological robustness. PMID:25484347

  4. The biological functions of miRNAs: lessons from in vivo studies.

    PubMed

    Vidigal, Joana A; Ventura, Andrea

    2015-03-01

    Despite their clear importance as a class of regulatory molecules, pinpointing the relevance of individual miRNAs has been challenging. Studies querying miRNA functions by overexpressing or silencing specific miRNAs have yielded data that are often at odds with those collected from loss-of-functions models. In addition, knockout studies suggest that many conserved miRNAs are dispensable for animal development or viability. In this review, we discuss these observations in the context of our current knowledge of miRNA biology and review the evidence implicating miRNA-mediated gene regulation in the mechanisms that ensure biological robustness. PMID:25484347

  5. Study of Functional and Allosteric Sites in Protein Superfamilies

    PubMed Central

    Suplatov, D.; Švedas, V.

    2015-01-01

    The interaction of proteins (enzymes) with a variety of low-molecular-weight compounds, as well as protein-protein interactions, is the most important factor in the regulation of their functional properties. To date, research effort has routinely focused on studying ligand binding to the functional sites of proteins (active sites of enzymes), whereas the molecular mechanisms of allosteric regulation, as well as binding to other pockets and cavities in protein structures, remained poorly understood. Recent studies have shown that allostery may be an intrinsic property of virtually all proteins. Novel approaches are needed to systematically analyze the architecture and role of various binding sites and establish the relationship between structure, function, and regulation. Computational biology, bioinformatics, and molecular modeling can be used to search for new regulatory centers, characterize their structural peculiarities, as well as compare different pockets in homologous proteins, study the molecular mechanisms of allostery, and understand the communication between topologically independent binding sites in protein structures. The establishment of an evolutionary relationship between different binding centers within protein superfamilies and the discovery of new functional and allosteric (regulatory) sites using computational approaches can improve our understanding of the structure-function relationship in proteins and provide new opportunities for drug design and enzyme engineering. PMID:26798490

  6. Linearity and additivity in cluster-induced sputtering: A molecular-dynamics study of van der Waals bonded systems

    SciTech Connect

    Anders, Christian; Urbassek, Herbert M.; Johnson, Robert E.

    2004-10-15

    Using molecular-dynamics simulation, we study sputtering of a condensed-gas solid induced by the impact of atomic clusters with sizes 1{<=}n{<=}10{sup 4}. Above a nonlinear onset regime, we find a linear increase of the sputter yield Y with the total energy E of the bombarding cluster. The fitting coefficients in the linear regime depend only on the cluster size n such that for fixed bombardment energy, sputtering decreases with increasing cluster size n. We find that to a good approximation the sputter yield in this regime obeys an additivity rule in cluster size n such that doubling the cluster size at the same cluster velocity amounts to doubling the sputter yield. The sputter-limiting energy {epsilon}{sub s} is introduced which separates erosion ({epsilon}>{epsilon}{sub s}) from growth ({epsilon}<{epsilon}{sub s}) under cluster impact.

  7. Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization

    NASA Astrophysics Data System (ADS)

    Yu, Binbin; Zeng, Zhong; Ren, Qinyu; Chen, Yang; Liang, Mei; Zou, Huawei

    2016-09-01

    A series of block type polycarboxylate-based superplasticizers (PCs) with different molecular architectures were synthesized with macromonomer butenyl alkylene polyoxyethylene-polyoxypropylene ether (BAPP) and acrylic acid (AA) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Fourier-Transformed Infrared (FTIR) Spectroscopy and dynamic light scattering (DLS) were applied to investigate the PCs' molecular structure. The dispersion capacity of the PCs in cement were also measured, and the results showed that the polycarboxylic dispersing agents prepared by this method were suitable for portlant cement. It was found that the PCs could affect the hydration process, which was performed through retarding the generation of ettringite in the hydrated product. Our studies with X-ray diffraction (XRD), scanning electron microscopy (SEM) and compressive strength measurement of hydrated production were all supporting this conclusion.

  8. Novel λ(3)-iodane-based functionalization of synthetic carbon allotropes (SCAs)-common concepts and quantification of the degree of addition.

    PubMed

    Hof, Ferdinand; Schäfer, Ricarda A; Weiss, Cornelius; Hauke, Frank; Hirsch, Andreas

    2014-12-01

    The covalent functionalization of carbon allotropes represents a main topic in the growing field of nano materials. However, the development of functional architectures is impeded by the intrinsic polydispersibility of the respective starting material, the unequivocal characterization of the introduced functional moieties, and the exact determination of the degree of functionalization. Based on a novel carbon allotrope functionalization reaction, utilizing λ(3) -iodanes as radical precursor systems, we were able to demonstrate the feasibility to separate and to quantify thermally detached functional groups, formerly covalently linked to carbon nanotubes and graphene through thermogravimetric GC-MS. PMID:25345583

  9. Effects of Additives and Impurity on the Adhesive Behavior of the NiAl(110)/Al2O3 (0001) Interface: An Ab Initio Study

    NASA Astrophysics Data System (ADS)

    Ozfidan, Isil; Chen, Kuiying; Fu, Ming

    2011-12-01

    Using ab initio density functional theory (DFT), the adhesive behavior of NiAl(110)/Al2O3(0001) interface in thermal barrier coatings was systematically studied with an emphasis on the effects of alloying additives and impurity elements. To reveal possible atomic-scale mechanisms, the separations between certain atoms at the interface, the electron localization function (ELF), and the electron density of states (DOS) are thoroughly investigated. First, effects of individual elements such as S, Pt, and Cr, and reactive elements (REs) Hf, Zr, and Y, on the work of separation, W sep, of the interface were examined. As expected, the segregation of S to the interface significantly degrades the adhesion, while the substitution of Pt for Ni adjacent to the interface does not enhance the W sep. Cr and RE addition to the interface individually result in a considerable increase of W sep. Second, the addition of Pt, Hf, and Cr to the S containing interface is shown to mitigate the detrimental effect of sulfur to some extent. Co doping the interface with a selected combination of (Pt, Hf), (Pt, Cr), (Cr, Hf), (Cr, Y), (Hf, Y), and (Y, Zr) was implemented to probe possible synergistic interactions between elements on W sep. Synergistic effects are detected on increasing W sep for (Hf, Y), (Hf, Zr) combinations. Co doping the interface with (Cr, Y) and (Cr, Hf), however, is found to weaken the adhesion. Through a detailed analysis of electronic structures in terms of ELF and DOS, four dominant bonds across the interface, RE-O, RE-Ni, Aloxide-Ni, and AlNiAl-O, are identified to play a decisive role in governing the adhesive strength of the interface.

  10. Evidence of Rapidly Warming Rivers in the UK from an Extensive Additive Modelling Study at the National Scale Using R

    NASA Astrophysics Data System (ADS)

    Simpson, G. L.

    2011-12-01

    River water temperature data exhibit non-linear behaviour over the past 50 or so years. Standard techniques for identifying and quantifying trends have centred around the use of linear regression and Mann-Kendall and Thiel-Sen procedures. Observational data from UK rivers suggest that temperatures are far more variable then assumed under these statistical models. In a national-scale assessment of the response of riverine systems to global climatic change, an additive model framework was employed to model patterns in water temperatures from a large database of temporal observational data. Models were developed using R, which allowed for the deployment of cutting-edge additive modelling techniques to describe trends at 2773 sites across England and Wales, UK. At a subset of sites, additive models were used to model long-term trends, trends within seasons and the long-term variation in the seasonal pattern of water temperatures. Changes in water temperature have important consequences for aquatic ecology, with some species being particularly sensitive even to small shifts in temperature during some or all of their lifecycle. While there are many studies reporting increasing regional and global air temperatures, evidence for changes in river water temperature has thus far been site specific and/or from sites heavily influenced by human activities that could themselves lead to warming. Here I present selected results from a national-scale assessment of changing river water temperatures, covering the whole of England and Wales, comprising data from 2,773 locations. Positive trends in water temperature were observed at 86% of sites. At a subset of sites, seasonal trend models were developed, which showed that 90% of locations demonstrated statistically significant increases in water temperature during Autumn and Winter periods. Multivariate smoothers, that allow for within-year and longer-term trend interactions in time, suggest that periods of warmer waters now extend

  11. Multiple Stressors in Agricultural Streams: A Mesocosm Study of Interactions among Raised Water Temperature, Sediment Addition and Nutrient Enrichment

    PubMed Central

    Piggott, Jeremy J.; Lange, Katharina; Townsend, Colin R.; Matthaei, Christoph D.

    2012-01-01

    Changes to land use affect streams through nutrient enrichment, increased inputs of sediment and, where riparian vegetation has been removed, raised water temperature. We manipulated all three stressors in experimental streamside channels for 30 days and determined the individual and pair-wise combined effects on benthic invertebrate and algal communities and on leaf decay, a measure of ecosystem functioning. We added nutrients (phosphorus+nitrogen; high, intermediate, natural) and/or sediment (grain size 0.2 mm; high, intermediate, natural) to 18 channels supplied with water from a nearby stream. Temperature was increased by 1.4°C in half the channels, simulating the loss of upstream and adjacent riparian shade. Sediment affected 93% of all biological response variables (either as an individual effect or via an interaction with another stressor) generally in a negative manner, while nutrient enrichment affected 59% (mostly positive) and raised temperature 59% (mostly positive). More of the algal components of the community responded to stressors acting individually than did invertebrate components, whereas pair-wise stressor interactions were more common in the invertebrate community. Stressors interacted often and in a complex manner, with interactions between sediment and temperature most common. Thus, the negative impact of high sediment on taxon richness of both algae and invertebrates was stronger at raised temperature, further reducing biodiversity. In addition, the decay rate of leaf material (strength loss) accelerated with nutrient enrichment at ambient but not at raised temperature. A key implication of our findings for resource managers is that the removal of riparian shading from streams already subjected to high sediment inputs, or land-use changes that increase erosion or nutrient runoff in a landscape without riparian buffers, may have unexpected effects on stream health. We highlight the likely importance of intact or restored buffer strips, both

  12. Epidemiological studies of taste function: Discussion and perspectives

    PubMed Central

    Snyder, Derek J.; Bartoshuk, Linda M.

    2009-01-01

    Efforts to quantify the public health impact of chemosensation present significant challenges, including a strong need for testing methods suitable for field assessment. This discussion highlights several promising approaches to the population-based study of taste function; it also identifies key principles that should be considered when adapting laboratory-based taste tests for field use. PMID:19686195

  13. Catalytic activities of platinum nanotubes: a density functional study

    NASA Astrophysics Data System (ADS)

    Mukherjee, Prajna; Gupta, Bikash C.; Jena, Puru

    2015-10-01

    In this work we investigate the catalytic properties of platinum nanotubes using density functional theory based calculations. In particular, we study the dissociation of hydrogen and oxygen molecules as well as oxidation of CO molecules. The results indicate that platinum nanotubes have good catalytic properties and can be effectively used in converting CO molecule to CO2.

  14. Which density functional should be used to study actinyl complexes?

    PubMed

    Austin, Jonathan P; Burton, Neil A; Hillier, Ian H; Sundararajan, Mahesh; Vincent, Mark A

    2009-02-28

    The new M06 functional of Truhlar and co-workers is found to be competitive with high level ab initio methods in the study of the water exchange mechanism of the [UO(2)(OH(2))(5)](2+) ion, and of the redox potentials of the aqua complexes of [AnO(2)](2+) (An = U, Np and Pu). PMID:19209355

  15. Functional studies of split "Arabidopsis" Ca(2+)/H(+) exchangers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In plants, high capacity tonoplast cation/H (+) antiport is mediated in part by a family of cation exchanger (CAX) transporters. Functional association between CAX1 and CAX3 has previously been shown. In this study, we further examine the interactions between CAX protein domains using nonfunctional ...

  16. A Developmental Study of Concepts of Body Functioning. Final Report.

    ERIC Educational Resources Information Center

    Stern, Virginia; Zimiles, Herbert

    The first phase of a projected research program aimed at examining children's ideas about body functioning, this study focuses on concepts of digestion, elimination of waste and assimilation of food held by children of different ages. (Subjects expressed these concepts both verbally and graphically). Possible cues to the influence of affect on…

  17. Monte Carlo study of the atmospheric spread function

    NASA Technical Reports Server (NTRS)

    Pearce, W. A.

    1986-01-01

    Monte Carlo radiative transfer simulations are used to study the atmospheric spread function appropriate to satellite-based sensing of the earth's surface. The parameters which are explored include the nadir angle of view, the size distribution of the atmospheric aerosol, and the aerosol vertical profile.

  18. A Qualitative Case Study: Teacher Perceptions of Executive Function

    ERIC Educational Resources Information Center

    Reed, Stacey L. E.

    2016-01-01

    Executive function (EF) is becoming a more widely used term to explain student behaviors, yet research on EF in education is limited. This qualitative study addressed a gap in literature by examining teacher perceptions of students with EF deficits, as well as teacher preparedness and desire to learn more about EF. Perceptions of third grade,…

  19. Engineering study for the functional design of a multiprocessor system

    NASA Technical Reports Server (NTRS)

    Miller, J. S.; Vandever, W. H.; Stanten, S. F.; Avakian, A. E.; Kosmala, A. L.

    1972-01-01

    The results are presented of a study to generate a functional system design of a multiprocessing computer system capable of satisfying the computational requirements of a space station. These data management system requirements were specified to include: (1) real time control, (2) data processing and storage, (3) data retrieval, and (4) remote terminal servicing.

  20. Functional Communication Training in Rett Syndrome: A Preliminary Study

    ERIC Educational Resources Information Center

    Byiers, Breanne J.; Dimian, Adele; Symons, Frank J.

    2014-01-01

    Rett syndrome (RTT) is associated with a range of serious neurodevelopmental consequences including severe communicative impairments. Currently, no evidence-based communication interventions exist for the population (Sigafoos et al., 2009). The purpose of the current study was to examine the effectiveness of functional assessment (FA) and…

  1. Studies on sintering additives for hydroxyapatite, and controlled porosity structures of calcium aluminates and polypropylene-tricalcium phosphate for bone graft applications

    NASA Astrophysics Data System (ADS)

    Kalita, Samar Jyoti

    Tissue engineering has made a significant contribution in developing new biomaterials that can restore the structural features and physiological functions of natural tissues. Various materials, such as metals, ceramics, polymers and composites have been developed for their use in hard tissue engineering applications. Part A of this thesis describes my research on HAp ceramics. HAp, a bioactive ceramic, is known for its osteoconductivity, but shows poor mechanical performance. This program aimed at improving mechanical performance of synthetic HAp by introducing small quantities of various sintering additives. A range of oxide-based sintering additives were selected and prepared. Dense compacts were prepared using a uniaxial press with an average green density of 1.6 g/cc. Results showed that some of these sintering additives improved densification, hardness and compression strength of synthetic HAp compared to the pure composition. A maximum bulk density of 3.06 g/cc was achieved for 2.5 wt% addition of MgO. A Microhardness of 4.9 GPa (505 HV) was measured for 2.5 wt% addition of BaO, and the highest compression strength (220MPa) was reported for 2.5 wt% addition of CaO. Cytotoxicity and cell proliferation studies with a modified human osteoblast (HOB) cell-line (OPC1) proved most of these materials non-toxic and biocompatible. Microscopic observation revealed that bone cells were attached and grew well on most of these ceramic matrices. Part B describes my work on development of controlled porosity polypropylene-tricalcium phosphate composite scaffolds via the fused deposition modeling (FDM) process. Hg-porosimetry was performed to determine pore size and their distribution. Uniaxial compression testing performed on samples with 36 vol% porosity and pore size of 160 mum showed the best compressive strength of 12.7 MPa. Part C includes my research on development of "3-D honeycomb" porous calcium aluminate structures via the indirect FDM process. Samples of 29% and

  2. [Respiratory function study on insulin-dependant diabetics (author's transl)].

    PubMed

    Oulhen, P; Barthélémy, L; Bellet-Barthas, M; Darragon, T

    1982-01-01

    A present report on insulin dependant diabetics described changes in ventilatory mechanics and a decrease of pulmonary volumes; other studies ended up with different results, i.e. an absence of any spirographic change: the current study agrees with the latter findings. Yet, we noticed an alteration in the CO transfer of the lungs at the alveolar-capillary membrane level which appeared to be due to a reduced pulmonary capillary volume. The duration of the disease and the possible appearance of characteristic complications of diabetes did not seem to have any influence on the functional parameters measured. On the other hand, a broncho-pulmonary disorder independant of diabetes but associated with certain ailments (chronic bronchitis, sequelae of tuberculosis, ... tobacco smoking, etc.) led, as one might have foreseen, to functional ventilatory disturbances. A histological and haematological study would be a logical sequel to our study to clarify the mechanism of the diminished pulmonary transfer capacity. PMID:7111831

  3. Bidirectional Reflectance Functions for Application to Earth Radiation Budget Studies

    NASA Technical Reports Server (NTRS)

    Manalo-Smith, N.; Tiwari, S. N.; Smith, G. L.

    1997-01-01

    Reflected solar radiative fluxes emerging for the Earth's top of the atmosphere are inferred from satellite broadband radiance measurements by applying bidirectional reflectance functions (BDRFs) to account for the anisotropy of the radiation field. BDRF's are dependent upon the viewing geometry (i.e. solar zenith angle, view zenith angle, and relative azimuth angle), the amount and type of cloud cover, the condition of the intervening atmosphere, and the reflectance characteristics of the underlying surface. A set of operational Earth Radiation Budget Experiment (ERBE) BDRFs is available which was developed from the Nimbus 7 ERB (Earth Radiation Budget) scanner data for a three-angle grid system, An improved set of bidirectional reflectance is required for mission planning and data analysis of future earth radiation budget instruments, such as the Clouds and Earth's Radiant Energy System (CERES), and for the enhancement of existing radiation budget data products. This study presents an analytic expression for BDRFs formulated by applying a fit to the ERBE operational model tabulations. A set of model coefficients applicable to any viewing condition is computed for an overcast and a clear sky scene over four geographical surface types: ocean, land, snow, and desert, and partly cloudy scenes over ocean and land. The models are smooth in terms of the directional angles and adhere to the principle of reciprocity, i.e., they are invariant with respect to the interchange of the incoming and outgoing directional angles. The analytic BDRFs and the radiance standard deviations are compared with the operational ERBE models and validated with ERBE data. The clear ocean model is validated with Dlhopolsky's clear ocean model. Dlhopolsky developed a BDRF of higher angular resolution for clear sky ocean from ERBE radiances. Additionally, the effectiveness of the models accounting for anisotropy for various viewing directions is tested with the ERBE along tract data. An area

  4. Effect of addition of magnesium to local anesthetics for peribulbar block: A prospective randomized double-blind study

    PubMed Central

    Sinha, R; Sharma, A; Ray, BR; Chandiran, R; Chandralekha, C; Sinha, R

    2016-01-01

    Background: Magnesium sulphate has been used along with local anesthetics in different regional blocks and found to be effective in decreasing the time of onset of the block and increasing the duration of the block. Objective: To evaluate the effect of addition of magnesium sulfate to standard local anesthetics mixture on the time for onset of the globe and lid akinesia for peribulbar block in ophthalmic surgeries. Materials and Methods: Sixty patients with American Society of Anesthesiologists status I to III undergoing ophthalmic surgery under peribulbar block were included in this study. Patients were randomized into two groups. Both the groups received 4.5 ml of 2% lidocaine, 4.5 ml of 0.5% bupivacaine with150 IU hyaluronidase. Group NS received normal saline 1 ml in the peribulbar block and Group MS, magnesium sulfate 50 mg in 1 ml normal saline. The onset of akinesia, satisfactory block and complications were observed by an independent observer. Results: Demographic data was statistically similar. In the Group NS at 3, 5, 10 and 15 min after the block, complete akinesia was seen in 0, 2, 11 and 28 patients respectively. In the Group MS, at 3, 5, 10 and 15 min after the block, complete akinesia was seen in 13, 23, 27 and 28 patients respectively. Patients received magnesium sulfate showed the statistically significant rapid onset of lid and globe akinesia than the control group till 10 min (P < 0.000). None of the patients needed a supplementary block and had complications during the surgery. Conclusion: Addition of 50 mg of magnesium sulfate to the lidocaine-bupivacaine mixture for peribulbar block decreases the onset of akinesia without any obvious side effect. PMID:26955313

  5. Can homeopathy bring additional benefits to thalassemic patients on hydroxyurea therapy? Encouraging results of a preliminary study.

    PubMed

    Banerjee, Antara; Chakrabarty, Sudipa Basu; Karmakar, Susanta Roy; Chakrabarty, Amit; Biswas, Surjyo Jyoti; Haque, Saiful; Das, Debarsi; Paul, Saili; Mandal, Biswapati; Naoual, Boujedaini; Belon, Philippe; Khuda-Bukhsh, Anisur Rahman

    2010-03-01

    Several homeopathic remedies, namely, Pulsatilla Nigricans (30th potency), Ceanothus Americanus (both mother tincture and 6th potency) and Ferrum Metallicum (30th potency) selected as per similia principles were administered to 38 thalassemic patients receiving Hydroxyurea (HU) therapy for a varying period of time. Levels of serum ferritin (SF), fetal hemoglobin (HbF), hemoglobin (Hb), platelet count (PC), mean corpuscular volume (MCV), mean corpuscular hemoglobin concentration (MCHC), mean corpuscular hemoglobin (MCH), white blood cell (WBC) count, bilirubin content, alanine amino transferase (ALT), aspartate amino transferase (AST) and serum total protein content of patients were determined before and 3 months after administration of the homeopathic remedies in combination with HU to evaluate additional benefits, if any, derived by the homeopathic remedies, by comparing the data with those of 38 subjects receiving only HU therapy. Preliminary results indicated that there was a significant decrease in the SF and increase in HbF levels in the combined, treated subjects. Although the changes in other parameters were not so significant, there was a significant decrease in size of spleen in most patients with spleenomegaly and improvement in general health conditions along with an increased gap between transfusions in most patients receiving the combined homeopathic treatment. The homeopathic remedies being inexpensive and without any known side-effects seem to have great potentials in bringing additional benefits to thalassemic patients; particularly in the developing world where blood transfusions suffer from inadequate screening and fall short of the stringent safety standards followed in the developed countries. Further independent studies are encouraged. PMID:18955271

  6. Additions and corrections to the bibliography of geologic studies, Columbia Plateau (Columbia River Besalt) and adjacent Areas, in Idaho, 1980

    SciTech Connect

    Strowd, W.

    1980-01-01

    This bibliography is an update to Idaho Bureau of Mines and Geology Open-File Report 78-6, Bibliography of Geological Studies, Columbia Plateau (Columbia River Basalt Group) and adjacent areas in Idaho (also known as Rockwell Hanford Operations' contractor report RHO-BWI-C-44). To keep the original document current, this additions and corrections report was prepared for the Basalt Waste Isolation Project of Rockwell Hanford Operations. This update is supplementary; therefore, references cited in the original document have not been included here. What is included are materials that have become available since the original publication and pertinent literature that had originally been overlooked. Accompany this updated bubliography are index maps that show locations of geologic studies and geochemical petrographic, remanent paleomagnetic, and radiometric age-dated sites within the Columbia River Basalt Group field within Idaho; also identified are archeological sites, test wells, mines, quarries, and other types of excavations. References on the index maps are keyed to the bibliography and cover the Spokane, Pullman, Hamilton, Grangeville, Elk City, Baker, Boise, and Jordan Valley Army Map Service two-degree quadrangles.

  7. Safety evaluation studies of SGF gum--a potential food additive from the seed of Sesbania cannabina.

    PubMed

    Li, X L; Xu, E Y; Xu, G C; Shang, R M; Wang, Y M; Chen, J; Huang, F C

    1988-01-01

    SGF gum, derived from the plant Sesbania cannabina, has properties very similar to those of guar gum. Because it is much cheaper than guar, SGF gum is of interest as a possible new food additive. It has therefore been tested in rats for acute, short-term and subchronic toxicity, teratogenicity and effects on reproductive performance, and a 1% concentration in the diet has been identified as the no-effect level. The tests complied with the guidelines issued by the Chinese authorities. Mutagenicity studies, Ames tests and a micronucleus test gave negative results, and a dominant lethal test in mice was negative at the 1% dietary level, although at 5 and 10% the results were equivocal. No adverse changes were elicited in 23 human volunteers who consumed a total of 960 mg SGF gum during a 30-day period during which they consumed, daily, 80 g ice-cream containing 0.04% SGF gum instead of the usual thickener. On the basis of applying a 100-fold safety factor to the findings in the animal studies, an acceptable human daily intake of 6 mg/kg is suggested. PMID:3209133

  8. Alignments, additivity, and signature inversion in odd-odd {sup 170}Ta : a comprehensive high-spin study.

    SciTech Connect

    Aguilar, A.; Hartley, D. J.; Riley, M. A.; Teal, C.; Carpenter, M. P.; Chowdhury, P.; Danchev, M.; Djongolov, M. K.; Hagemann, G. B.; Hecht, A. A.; Janssens, R. V. F.; Kondev, F. G.; Lauritsen, T.; Ma, W. C.; Mohr, W. H.; Moore, E. F.; Odegard, S. W.; Riedinger, L. L.; Sletten, G.; Tandel, S. K.; Vanhoy, J. R.; Wang, X.; Zhu, S.; Florida State Univ.; U.S. Naval Academy; Univ. of Massachusetts; Univ. of Tennessee; Niels Bohr Inst.; Mississippi State Univ.; Univ. of Oslo

    2010-01-01

    High-spin states (I?50?) of the odd-odd nucleus 170Ta have been investigated with the 124Sn(51V,5n) reaction. The resolving power of Gammasphere has allowed for the observation of eleven rotational bands (eight of which are new) and over 430 transitions ( 350 of which are new) in this nucleus. Many interband transitions have been observed such that the relative spins and excitation energies of the 11 bands have been established. This is an unusual circumstance in an odd-odd study. Configurations have been assigned to most of these bands based upon features such as alignment properties, band crossings, B(M1)/B(E2) ratios, and the additivity of Routhians. A systematic study of the frequency at which normal signature ordering occurs in the ?h9/2?i13/2 band has been performed and it is found that its trend is opposite to that observed in the ?h11/2?i13/2 bands. A possible interpretation of these trends is discussed based on a proton-neutron interaction.

  9. Association of Common Variants in the Human Eyes Shut Ortholog, EYS, with Statin-Induced Myopathy: Evidence for Additional Functions of EYS

    PubMed Central

    Isackson, Paul J.; Ochs-Balcom, Heather M.; Ma, Changxing; Harley, John B.; Peltier, Wendy; Tarnopolsky, Mark; Sripathi, Naganand; Wortmann, Robert L.; Simmons, Zachary; Wilson, Jon D.; Smith, Stephen A.; Barboi, Alexandru; Fine, Edward; Baer, Alan; Baker, Steven; Kaufman, Kenneth; Cobb, Beth; Kilpatrick, Jeffrey R.; Vladutiu, Georgirene D.

    2011-01-01

    Introduction Of nearly 38 million people in the U.S. receiving statin therapy, 0.1–0.5% experience severe or life-threatening myopathic side effects. Methods We performed a genome-wide association study (GWAS) in patients with severe statin myopathy versus a statin-tolerant group to identify genetic susceptibility loci. Results Replication studies in independent groups of severe statin myopathy (n=190) and statintolerant controls (n=130) resulted in the identification of three SNPs, rs9342288, rs1337512 and rs3857532, in the eyes shut homolog (EYS) on chromosome 6 suggestive of an association with risk for severe statin myopathy (p=0.0003–0.0008). Analysis of EYS cDNA demonstrated that EYS gene products are complex and expressed with relative abundance in the spinal cord as well as in the retina. Discussion Structural similarities of these EYS gene products to members of the Notch signaling pathway and to agrin suggest a possible functional role in the maintenance and regeneration of the structural integrity of skeletal muscle. PMID:21826682

  10. The Study of Leukocyte Functions in a Rotating Wall Vessel

    NASA Technical Reports Server (NTRS)

    Trial, JoAnn

    1998-01-01

    The objective of this study was to investigate the behavior of leukocytes under free-fall conditions in a rotating wall vessel. In such a vessel, the tendency of a cell to fall in response to gravity is opposed by the rotation of the vessel and the culture medium within, keeping the cells in suspension without fluid shear. Previous reports indicated that such functions as lymphocyte migration through collagen matrix or monocyte cytokine secretion are altered under these conditions, and these changes correlate with similar functional defects of cultured cells seen during spaceflight.

  11. Ferroportin diseases: functional studies, a link between genetic and clinical phenotype.

    PubMed

    Détivaud, Lénaïck; Island, Marie-Laure; Jouanolle, Anne-Marie; Ropert, Martine; Bardou-Jacquet, Edouard; Le Lan, Caroline; Mosser, Annick; Leroyer, Patricia; Deugnier, Yves; David, Véronique; Brissot, Pierre; Loréal, Olivier

    2013-11-01

    Ferroportin (FPN) mediates iron export from cells and this function is modulated by serum hepcidin. Mutations in the FPN gene (SLC40A1) lead to autosomal dominant iron overload diseases related either to loss or to gain of function, and usually characterized by normal or low transferrin saturation versus elevated transferrin saturation, respectively. However, for the same mutation, the phenotypic expression may vary from one patient to another. Using in vitro overexpression of wild-type or mutant FPN proteins, we characterized the functional impact of five recently identified FPN gene mutations regarding FPN localization, cell iron status, and hepcidin sensitivity. Our aim was to integrate functional results and biological findings in probands and relatives. We show that while the p.Arg371Gln (R371Q) mutation had no impact on studied parameters, the p.Trp158Leu (W158L), p.Arg88Gly (R88G), and p.Asn185Asp (N185D) mutations caused an iron export defect and were classified as loss-of-function mutations. The p.Gly204Ser (G204S) mutation induced a gain of FPN function. Functional studies are useful to determine whether or not a FPN gene mutation found in an iron overloaded patient is deleterious and to characterize its biological impact, especially when family studies are not fully informative and/or additional confounding factors may affect bio-clinical expression. PMID:23943237

  12. Functional communication training in rett syndrome: a preliminary study.

    PubMed

    Byiers, Breanne J; Dimian, Adele; Symons, Frank J

    2014-07-01

    Rett syndrome (RTT) is associated with a range of serious neurodevelopmental consequences including severe communicative impairments. Currently, no evidence-based communication interventions exist for the population ( Sigafoos et al., 2009 ). The purpose of the current study was to examine the effectiveness of functional assessment (FA) and functional communication training (FCT) methods for teaching 3 individuals (ages 15-47 years) with classic RTT novel communicative behaviors. Using single-case experimental designs, functional reinforcers were identified (FA) and each participant quickly learned to activate a voice-output switch to obtain a reinforcer (FCT). These results suggest that individuals with classic RTT can learn novel communicative responses, which has important implications for future intervention research. PMID:25007298

  13. Study of genetic direct search algorithms for function optimization

    NASA Technical Reports Server (NTRS)

    Zeigler, B. P.

    1974-01-01

    The results are presented of a study to determine the performance of genetic direct search algorithms in solving function optimization problems arising in the optimal and adaptive control areas. The findings indicate that: (1) genetic algorithms can outperform standard algorithms in multimodal and/or noisy optimization situations, but suffer from lack of gradient exploitation facilities when gradient information can be utilized to guide the search. (2) For large populations, or low dimensional function spaces, mutation is a sufficient operator. However for small populations or high dimensional functions, crossover applied in about equal frequency with mutation is an optimum combination. (3) Complexity, in terms of storage space and running time, is significantly increased when population size is increased or the inversion operator, or the second level adaptation routine is added to the basic structure.

  14. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  15. Considerations for resting state functional MRI and functional connectivity studies in rodents

    PubMed Central

    Pan, Wen-Ju; Billings, Jacob C. W.; Grooms, Joshua K.; Shakil, Sadia; Keilholz, Shella D.

    2015-01-01

    Resting state functional MRI (rs-fMRI) and functional connectivity mapping have become widely used tools in the human neuroimaging community and their use is rapidly spreading into the realm of rodent research as well. One of the many attractive features of rs-fMRI is that it is readily translatable from humans to animals and back again. Changes in functional connectivity observed in human studies can be followed by more invasive animal experiments to determine the neurophysiological basis for the alterations, while exploratory work in animal models can identify possible biomarkers for further investigation in human studies. These types of interwoven human and animal experiments have a potentially large impact on neuroscience and clinical practice. However, impediments exist to the optimal application of rs-fMRI in small animals, some similar to those encountered in humans and some quite different. In this review we identify the most prominent of these barriers, discuss differences between rs-fMRI in rodents and in humans, highlight best practices for animal studies, and review selected applications of rs-fMRI in rodents. Our goal is to facilitate the integration of human and animal work to the benefit of both fields. PMID:26300718

  16. Autonomic Function following Acute Organophosphorus Poisoning: A Cohort Study

    PubMed Central

    Jayasinghe, Sudheera S.; Pathirana, Kithsiri D.

    2012-01-01

    Autonomic dysfunction after chronic low level exposure to organophosphorus (OP) pesticides has been consistently reported in the literature, but not following a single acute overdose. In order to study autonomic function after an acute OP overdose, sixty-six overdose patients were compared to 70 matched controls. Assessment of autonomic function was done by heart rate response to standing, deep breathing (HR-DB) and Valsalva manoeuvre; blood pressure (BP) response to standing and sustained hand grip; amplitude and latency of sympathetic skin response (SSR); pupil size and post-void urine volume. The patients were assessed one and six weeks after the exposure. The number of patients who showed abnormal autonomic function compared to standard cut-off values did not show statistically significantly difference from that of controls by Chi-Square test. When compared to the controls at one week the only significant differences consistent with autonomic dysfunction were change of diastolic BP 3 min after standing, HR-DB, SSR-Amplitude, SSR-Latency, post-void urine volume and size of the pupil. At 6 weeks significant recovery of autonomic function was observed and only HR-DB was decreased to a minor degree, −5 beats/min [95%CI 2–8]. This study provides good evidence for the lack of long term autonomic dysfunction following acute exposure to OP pesticides. PMID:22655091

  17. Emerging tools to study proteoglycan function during skeletal development.

    PubMed

    Brown, D S; Eames, B F

    2016-01-01

    In the past 20years, appreciation for the varied roles of proteoglycans (PGs), which are specific types of sugar-coated proteins, has increased dramatically. PGs in the extracellular matrix were long known to impart structural functions to many tissues, especially articular cartilage, which cushions bones and allows mobility at skeletal joints. Indeed, osteoarthritis is a debilitating disease associated with loss of PGs in articular cartilage. Today, however, PGs have a demonstrated role in cell biological processes, such as growth factor signalling, prompting new perspectives on the etiology of PG-associated diseases. Here, we review diseases associated with defects in PG synthesis and sulfation, also highlighting current understanding of the underlying genetics, biochemistry, and cell biology. Since most research has analyzed a class of PGs called heparan sulfate PGs, more attention is paid here to studies of chondroitin sulfate PGs (CSPGs), which are abundant in cartilage. Interestingly, CSPG synthesis is tightly linked to the cell biological processes of secretion and lysosomal degradation, suggesting that these systems may be linked genetically. Animal models of loss of CSPG function have revealed CSPGs to impact skeletal development. Specifically, our work from a mutagenesis screen in zebrafish led to the hypothesis that cartilage PGs normally delay the timing of endochondral ossification. Finally, we outline emerging approaches in zebrafish that may revolutionize the study of cartilage PG function, including transgenic methods and novel imaging techniques. Our recent work with X-ray fluorescent imaging, for example, enables direct correlation of PG function with PG-dependent biological processes. PMID:27312503

  18. Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles: wettability and surface morphology study

    NASA Astrophysics Data System (ADS)

    Chudinova, E.; Surmeneva, M.; Koptioug, A.; Sharonova, A.; Loza, K.; Surmenev, R.

    2016-02-01

    In this work, the use of electrophoretic deposition to modify the surface of Ti6Al4V alloy fabricated via additive manufacturing technology is reported. Poly(vinylpyrrolidone) (PVP)-stabilized silver nanoparticles (AgNPs) had a spherical shape with a diameter of the metallic core of 100±20 nm and ζ -potential -15 mV. The AgNPs- coated Ti6Al4V alloy was studied in respect with its chemical composition and surface morphology, water contact angle, hysteresis, and surface free energy. The results of SEM microphotography analysis showed that the AgNPs were homogeneously distributed over the surface. Hysteresis and water contact angle measurements revealed the effect of the deposited AgNPs layer, namely an increased water contact angle and decreased contact angle hysteresis. However, the average water contact angle was 125° for PVP-stabilized-AgNPs-coated surface, whereas ethylene glycol gave the average contact angle of 17°. A higher surface energy is observed for AgNPs-coated Ti6Al4V surface (70.17 mN/m) compared with the uncoated surface (49.07 mN/m).

  19. Tropical Tropospheric Ozone from SHADOZ (Southern Hemisphere ADditional Ozonesondes) Network: A Project for Satellite Research, Process Studies, Education

    NASA Technical Reports Server (NTRS)

    Thompson, Anne M.; Witte, Jacquelyn C.; Oltmans, Samuel J.; Schmidlin, Francis J.; Coetzee, G. J. R.; Hoegger, Bruno; Kirchhoff, V. W. J. H.; Ogawa, Toshihiro; Kawakami, Shuji; Posny, Francoise

    2002-01-01

    The first climatological overview of total, stratospheric and tropospheric ozone in the southern hemisphere tropical and subtropics is based on ozone sounding data from 10 sites comprising the Southern Hemisphere Additional OZonesondes (SHADOZ) network. The period covered is 1998-2000. Observations were made over: Ascension Island; Nairobi, Kenya; Irene, South Africa; Reunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil. Campaign data were collected on a trans-Atlantic oceanographic cruise and during SAFARI-2000 in Zambia. The ozone data, with simultaneous temperature profiles to approx. 7 hPa and relative humidity to approx. 200 hPa, reside at: . SHADOZ ozone time-series and profiles give a perspective on tropical total, stratospheric and tropospheric ozone. Prominent features are highly variable tropospheric ozone and a zonal wave-one pattern in total (and tropospheric) column ozone. Total, stratospheric and tropospheric column ozone amounts peak between August and November and are lowest between March and May. Tropospheric ozone variability over the Indian and Pacific Ocean displays influences of the Indian Ocean Dipole and convective mixing. Pollution transport from Africa and South America is a seasonal feature. Tropospheric ozone seasonality over the Atlantic Basin shows effects of regional subsidence and recirculation as well as biomass burning. Dynamical and chemical influences appear to be of comparable magnitude though model studies are needed to quantify this.

  20. Did the addition of concomitant chemotherapy to radiotherapy improve outcomes in hypopharyngeal cancer? A population-based study

    PubMed Central

    Hall, S.F.; Griffiths, R.

    2016-01-01

    Background For oncologists and for patients, no site-specific clinical trial evidence has emerged for the use of concurrent chemotherapy with radiotherapy (ccrt) over radiotherapy (rt) alone for cancer of the hypopharynx (hpc) or for other human papilloma virus–negative head-and-neck cancers. Methods This retrospective population-based cohort study using administrative data compared treatments over time (1990–2000 vs. 2000–2010), treatment outcomes, and outcomes over time in 1333 cases of hpc diagnosed in Ontario between January 1990 and December 2010. Results The incidence of hpc is declining; the use of ccrt that began in 2001 is increasing; and the 3-year overall survival for all patients remains poor at 34.6%. No difference in overall survival was observed in a comparison of patients treated in the decade before ccrt and of patients treated in the decade during the uptake of ccrt. Conclusions The addition of ccrt to the armamentarium of treatment options for oncologists treating head-and-neck patients did not improve outcomes for hpc at the population level. PMID:27536177

  1. Characterization and comparative study of coal combustion residues from a primary and additional flue gas secondary desulfurization process

    SciTech Connect

    Gomes, S.; Francois, M.; Evrard, O.; Pellissier, C.

    1998-11-01

    An extensive characterization and comparative study was done on two flue gas desulfurization (FGD) residues derived from the same coal. LR residues (originated from Loire/Rhone in the south of Lyon, France) are obtained after a primary desulfurization process (SO{sub 2} is trapped by reaction with CaO at a temperature of about 1100 C), and LM residues (originating from La Maxe, near Metz in the east of France) are obtained after an additional secondary desulfurization process (SO{sub 2} is removed further by reaction with Ca(OH){sub 2} at a temperature of about 120 C). Various and complementary investigation methods were used to determine their chemical, physical, and mineralogical properties: x-ray fluorescence and diffraction, scanning electron microscopy, differential scanning calorimetry, thermogravimetry analysis, granulometric distribution, pycnometric density, BET specific surface area and pH, conductivity measurements, and chemical analysis of their insoluble fraction. The FGD residues contain basically two main components: a silico-aluminous fly ash part and calcic FGD phases. In the LR residues the two components can be considered as independent, whereas they are linked in the LM residues because chemical reactions have occurred, leading to the formation of silico-calcic gel CSH, hydrated aluminate AFm, and AFt phases.

  2. Study of stability and thermodynamic properties of water-in-diesel nanoemulsion fuels with nano-Al additive

    NASA Astrophysics Data System (ADS)

    Mehta, Rakhi N.; More, Utkarsh; Malek, Naved; Chakraborty, Mousumi; Parikh, Parimal A.

    2015-11-01

    The present work addresses the formation of water-in-diesel (W/D) nanoemulsion by blending different percentages of water along with nano-Al additive in various propositions to enhance the combustion characteristics. The roles of various surfactants such as Sorbitan monooleate (Span 80), Triton X-100, Tetradecyltrimethylammonium bromide, and newly synthesized and characterized dicationic surfactants were discussed based upon their ability to stabilize the nanoemulsions. Surface active properties of the surfactants were determined by measuring their interfacial tension and subsequently by measuring the critical micelle concentration of the surfactants. Triton X-100 was found to be the most efficient surfactant for the current water-in-diesel nanoemulsion as it stabilized the suspensions for more than 8 h. Particle size analysis proved emulsion size to be in the order of nanometer, and zeta potential values were found to have neutral behavior at water-diesel interface. Experimental studies confirmed that that blends W/D [1 % (vol.) water] and W/DA [1 % (vol.) water, 0.1 % (wt.) nano-Al] were thermodynamically stable.

  3. Additive technology of soluble mold tooling for embedded devices in composite structures: A study on manufactured tolerances

    NASA Astrophysics Data System (ADS)

    Roy, Madhuparna

    Composite textiles have found widespread use and advantages in various industries and applications. The constant demand for high quality products and services requires companies to minimize their manufacturing costs, and delivery time in order to compete in general and niche marketplaces. Advanced manufacturing methods aim to provide economical methods of mold production. Creation of molding and tooling options for advanced composites encompasses a large portion of the fabrication time, making it a costly process and restraining factor. This research discusses a preliminary investigation into the use of soluble polymer compounds and additive manufacturing to fabricate soluble molds. These molds suffer from dimensional errors due to several factors, which have also been characterized. The basic soluble mold of a composite is 3D printed to meet the desired dimensions and geometry of holistic structures or spliced components. The time taken to dissolve the mold depends on the rate of agitation of the solvent. This process is steered towards enabling the implantation of optoelectronic devices within the composite to provide sensing capability for structural health monitoring. The shape deviation of the 3D printed mold is also studied and compared to its original dimensions to optimize the dimensional quality to produce dimensionally accurate parts. Mechanical tests were performed on compact tension (CT) resin samples prepared from these 3D printed molds and revealed crack propagation towards an embedded intact optical fiber.

  4. Small angle neutron scattering study of sodium dodecyl sulfate micellar growth driven by addition of a hydrotropic salt.

    PubMed

    Hassan, P A; Fritz, Gerhard; Kaler, Eric W

    2003-01-01

    The structures of aggregates formed in aqueous solutions of an anionic surfactant, sodium dodecyl sulfate (SDS), with the addition of a cationic hydrotropic salt, p-toluidine hydrochloride (PTHC), have been investigated by small angle neutron scattering (SANS). The SANS spectra exhibit a pronounced peak at low salt concentration, indicating the presence of repulsive intermicellar interactions. Model-independent real space information about the structure is obtained from a generalized indirect Fourier transformation (GIFT) technique in combination with a suitable model for the interparticle structure factor. The interparticle interaction is captured using the rescaled mean spherical approximation (RMSA) closure relation and a Yukawa form of the interaction potential. Further quantification of the geometrical parameters of the micelles was achieved by a complete fit of the SANS data using a prolate ellipsoidal form factor and the RMSA structure factor. The present study shows that PTHC induces a decrease in the fractional charge of the micelles due to adsorption at the micellar surface and consequent growth of the SDS micelles from nearly globular to rodlike as the concentration of PTHC increases. PMID:16256467

  5. A five-year study of the impact of nitrogen addition on methane uptake in alpine grassland

    PubMed Central

    Yue, Ping; Li, Kaihui; Gong, Yanming; Hu, Yukun; Mohammat, Anwar; Christie, Peter; Liu, Xuejun

    2016-01-01

    It remains unclear how nitrogen (N) deposition affects soil methane (CH4) uptake in semiarid and arid zones. An in situ field experiment was conducted from 2010 to 2014 to systematically study the effect of various N application rates (0, 10, 30, and 90 kg N ha−1 yr−1) on CH4 flux in alpine grassland in the Tianshan Mountains. No significant influence of N addition on CH4 uptake was found. Initially the CH4 uptake rate increased with increasing N application rate by up to 11.5% in 2011 and then there was gradual inhibition by 2014. However, the between-year variability in CH4 uptake was very highly significant with average uptake ranging from 52.9 to 106.6 μg C m−2 h−1 and the rate depended largely on seasonal variability in precipitation and temperature. CH4 uptake was positively correlated with soil temperature, air temperature and to a lesser extent with precipitation, and was negatively correlated with soil moisture and NO3−-N content. The results indicate that between-year variability in CH4 uptake was impacted by precipitation and temperature and was not sensitive to elevated N deposition in alpine grassland. PMID:27571892

  6. A five-year study of the impact of nitrogen addition on methane uptake in alpine grassland.

    PubMed

    Yue, Ping; Li, Kaihui; Gong, Yanming; Hu, Yukun; Mohammat, Anwar; Christie, Peter; Liu, Xuejun

    2016-01-01

    It remains unclear how nitrogen (N) deposition affects soil methane (CH4) uptake in semiarid and arid zones. An in situ field experiment was conducted from 2010 to 2014 to systematically study the effect of various N application rates (0, 10, 30, and 90 kg N ha(-1) yr(-1)) on CH4 flux in alpine grassland in the Tianshan Mountains. No significant influence of N addition on CH4 uptake was found. Initially the CH4 uptake rate increased with increasing N application rate by up to 11.5% in 2011 and then there was gradual inhibition by 2014. However, the between-year variability in CH4 uptake was very highly significant with average uptake ranging from 52.9 to 106.6 μg C m(-2) h(-1) and the rate depended largely on seasonal variability in precipitation and temperature. CH4 uptake was positively correlated with soil temperature, air temperature and to a lesser extent with precipitation, and was negatively correlated with soil moisture and NO3(-)-N content. The results indicate that between-year variability in CH4 uptake was impacted by precipitation and temperature and was not sensitive to elevated N deposition in alpine grassland. PMID:27571892

  7. Resources for Functional Genomics Studies in Drosophila melanogaster

    PubMed Central

    Mohr, Stephanie E.; Hu, Yanhui; Kim, Kevin; Housden, Benjamin E.; Perrimon, Norbert

    2014-01-01

    Drosophila melanogaster has become a system of choice for functional genomic studies. Many resources, including online databases and software tools, are now available to support design or identification of relevant fly stocks and reagents or analysis and mining of existing functional genomic, transcriptomic, proteomic, etc. datasets. These include large community collections of fly stocks and plasmid clones, “meta” information sites like FlyBase and FlyMine, and an increasing number of more specialized reagents, databases, and online tools. Here, we introduce key resources useful to plan large-scale functional genomics studies in Drosophila and to analyze, integrate, and mine the results of those studies in ways that facilitate identification of highest-confidence results and generation of new hypotheses. We also discuss ways in which existing resources can be used and might be improved and suggest a few areas of future development that would further support large- and small-scale studies in Drosophila and facilitate use of Drosophila information by the research community more generally. PMID:24653003

  8. Functional brain imaging studies of youth depression: A systematic review☆

    PubMed Central

    Kerestes, Rebecca; Davey, Christopher G.; Stephanou, Katerina; Whittle, Sarah; Harrison, Ben J.

    2013-01-01

    Background There is growing interest in understanding the neurobiology of major depressive disorder (MDD) in youth, particularly in the context of neuroimaging studies. This systematic review provides a timely comprehensive account of the available functional magnetic resonance imaging (fMRI) literature in youth MDD. Methods A literature search was conducted using PubMED, PsycINFO and Science Direct databases, to identify fMRI studies in younger and older youth with MDD, spanning 13–18 and 19–25 years of age, respectively. Results Twenty-eight studies focusing on 5 functional imaging domains were identified, namely emotion processing, cognitive control, affective cognition, reward processing and resting-state functional connectivity. Elevated activity in “extended medial network” regions including the anterior cingulate, ventromedial and orbitofrontal cortices, as well as the amygdala was most consistently implicated across these five domains. For the most part, findings in younger adolescents did not differ from those in older youth; however a general comparison of findings in both groups compared to adults indicated differences in the domains of cognitive control and affective cognition. Conclusions Youth MDD is characterized by abnormal activations in ventromedial frontal regions, the anterior cingulate and amygdala, which are broadly consistent with the implicated role of medial network regions in the pathophysiology of depression. Future longitudinal studies examining the effects of neurodevelopmental changes and pubertal maturation on brain systems implicated in youth MDD will provide a more comprehensive neurobiological model of youth depression. PMID:24455472

  9. NMR techniques in the study of cardiovascular structure and functions

    SciTech Connect

    Osbakken, M.; Haselgrove, J.

    1987-01-01

    The chapter titles of this book are: Introduction to NMR Techniques;Theory of NMR Probe Design;Overview of Magnetic Resonance Imaging to Study the Cardiovascular System;Vascular Anatomy and Physiology Studied with NMR Techniques;Assessment of Myocardial Ischemia and Infarction by Nuclear Magnetic Resonance Imaging;The Use of MRI in Congenital Heart Disease;Cardiomyopathies and Myocarditis Studied with NMR Techniques;Determination of Myocardial Mechanical Function with Magnetic Resonance Imaging Techniques;Determination of Flow Using NMR Techniques;The Use of Contrast Agents in Cardiac MRI;Can Cardiovascular Disease Be Effectively Evaluated with NMR Spectroscopy. NMR Studies of ATP Synthesis Reactions in the Isolated Heart;Studies of Intermediary Metabolism in the Heart by 13C NMR Spectroscopy;23Na and 39K NMR Spectroscopic Studies of the Intact Beating Heart;and Evaluation of Skeletal Muscle Metabolism in Patients with Congestive Heart Failure Using Phosphorus Nuclear Magnetic Resonance.

  10. Functionalization of silicon carbide nanotube by dichlorocarbene: A density functional theory study

    NASA Astrophysics Data System (ADS)

    Xiao, Bo; Hu, Hong; Zhao, Jing-xiang; Ding, Yi-hong

    2014-02-01

    The existence of numerous unsaturated π bonds on surface of nanotubes is hopeful for effective chemical functionalization. Recently, the dichlorocarbene (CCl2)-functionalization has been widely applied to modify the electronic properties of carbon nanotubes (CNTs) and boron nitride nanotubes (BNNTs), through a simple one-step formation of the open three-membered-ring (3MR) structure. Here using density functional theory methods, we study the CCl2-functionalization of silicon carbide nanotubes (SiCNTs). Three distinct sequential steps are identified as: (1) 3MR formation, (2) Cl shift from C to Si atom, and (3) C bridging between a Si-C bond. Since the initial 3MR-formation is notably exothermic (2.47 eV), the subsequent steps take place easily, leading to the eventual adjacent C2 formation in the alternative C-Si network. Clearly, the adsorption behavior of CCl2 on SiCNTs contrasts sharply to that on CNTs and BNNTs, where the open 3MR structure is the eventually stabilized state with the two C-Cl bonds intactness. Such effective C-Cl splitting significantly decreases the band gap of SiCNT by about 50%. The adsorption of more CCl2 molecules leads to a transition from semiconducting SiCNT to degenerated p-type semiconducting SiCNT. The present results not only testify the high surface chemical reactivity of SiCNT, but also show a new way of tuning the electronic properties of SiCNT.

  11. Difference in aggregation between functional and toxic amyloids studied by atomistic simulations

    NASA Astrophysics Data System (ADS)

    Carballo Pacheco, Martin; Ismail, Ahmed E.; Strodel, Birgit

    Amyloids are highly structured protein aggregates, normally associated with neurodegenerative diseases such as Alzheimer's disease. In recent years, a number of nontoxic amyloids with physiologically normal functions, called functional amyloids, have been found. It is known that soluble small oligomers are more toxic than large fibrils. Thus, we study with atomistic explicit-solvent molecular dynamics simulations the oligomer formation of the amyloid- β peptide Aβ25 - 35, associated with Alzheimer's disease, and two functional amyloid-forming tachykinin peptides: kassinin and neuromedin K. Our simulations show that monomeric peptides in extended conformations aggregate faster than those in collapsed hairpin-like conformations. In addition, we observe faster aggregation by functional amyloids than toxic amyloids, which could explain their lack of toxicity.

  12. Reference Alloy Waste Form Fabrication and Initiation of Reducing Atmosphere and Reductive Additives Study on Alloy Waste Form Fabrication

    SciTech Connect

    S.M. Frank; T.P. O'Holleran; P.A. Hahn

    2011-09-01

    This report describes the fabrication of two reference alloy waste forms, RAW-1(Re) and RAW-(Tc) using an optimized loading and heating method. The composition of the alloy materials was based on a generalized formulation to process various proposed feed streams resulting from the processing of used fuel. Waste elements are introduced into molten steel during alloy fabrication and, upon solidification, become incorporated into durable iron-based intermetallic phases of the alloy waste form. The first alloy ingot contained surrogate (non-radioactive), transition-metal fission products with rhenium acting as a surrogate for technetium. The second alloy ingot contained the same components as the first ingot, but included radioactive Tc-99 instead of rhenium. Understanding technetium behavior in the waste form is of particular importance due the longevity of Tc-99 and its mobility in the biosphere in the oxide form. RAW-1(Re) and RAW-1(Tc) are currently being used as test specimens in the comprehensive testing program investigating the corrosion and radionuclide release mechanisms of the representative alloy waste form. Also described in this report is the experimental plan to study the effects of reducing atmospheres and reducing additives to the alloy material during fabrication in an attempt to maximize the oxide content of waste streams that can be accommodated in the alloy waste form. Activities described in the experimental plan will be performed in FY12. The first aspect of the experimental plan is to study oxide formation on the alloy by introducing O2 impurities in the melt cover gas or from added oxide impurities in the feed materials. Reducing atmospheres will then be introduced to the melt cover gas in an attempt to minimize oxide formation during alloy fabrication. The second phase of the experimental plan is to investigate melting parameters associated with alloy fabrication to allow the separation of slag and alloy components of the melt.

  13. Reconstructed human epidermis: A model to study the barrier function

    NASA Astrophysics Data System (ADS)

    Barbotteau, Y.; Gontier, E.; Barberet, P.; Cappadoro, M.; De Wever, B.; Habchi, C.; Incerti, S.; Mavon, A.; Moretto, P.; Pouthier, T.; Smith, R. W.; Ynsa, M. D.

    2005-04-01

    The use of in vitro reconstructed human epidermis (RHE) by the cosmetic and pharmaceutical industries is increasing because of its similar physiological mechanisms to native human skin. With the advent of ethic laws on animal experimentation, RHE provides an helpful alternative for the test of formulations. The aim of this study is to check that the RHE mineral status is comparable to that of human native skin by investigating the elemental distributions in the epidermis strata. In addition, possible deleterious effects of the transport on the epidermis ionic content were studied by nuclear microscopy.

  14. Proton NMR studies of functionalized nanoparticles in aqueous environments

    NASA Astrophysics Data System (ADS)

    Tataurova, Yulia Nikolaevna

    Nanoscience is an emerging field that can provide potential routes towards addressing critical issues such as clean and sustainable energy, environmental remediation and human health. Specifically, porous nanomaterials, such as zeolites and mesoporous silica, are found in a wide range of applications including catalysis, drug delivery, imaging, environmental protection, and sensing. The characterization of the physical and chemical properties of nanocrystalline materials is essential to the realization of these innovative applications. The great advantage of porous nanocrystals is their increased external surface area that can control their biological, chemical and catalytic activities. Specific functional groups synthesized on the surface of nanoparticles are able to absorb heavy metals from the solution or target disease cells, such as cancer cells. In these studies, three main issues related to functionalized nanomaterials will be addressed through the application of nuclear magnetic resonance (NMR) techniques including: 1) surface composition and structure of functionalized nanocrystalline particles; 2) chemical properties of the guest molecules on the surface of nanomaterials, and 3) adsorption and reactivity of surface bound functional groups. Nuclear magnetic resonance (NMR) is one of the major spectroscopic techniques available for the characterization of molecular structure and conformational dynamics with atomic level detail. This thesis deals with the application of 1H solution state NMR to porous nanomaterial in an aqueous environment. Understanding the aqueous phase behavior of functionalized nanomaterials is a key factor in the design and development of safe nanomaterials because their interactions with living systems are always mediated through the aqueous phase. This is often due to a lack of fundamental knowledge in interfacial chemical and physical phenomena that occur on the surface of nanoparticles. The use of solution NMR spectroscopy results

  15. Comparative study of GaN mesa etch characteristics in Cl{sub 2} based inductively coupled plasma with Ar and BCl{sub 3} as additive gases

    SciTech Connect

    Rawal, Dipendra Singh Arora, Henika; Sehgal, Bhupender Kumar; Muralidharan, Rangarajan

    2014-05-15

    GaN thin film etching is investigated and compared for mesa formation in inductively coupled plasma (ICP) of Cl{sub 2} with Ar and BCl{sub 3} gas additives using photoresist mask. Etch characteristics are studied as a function of ICP process parameters, viz., ICP power, radio frequency (RF) power, and chamber pressure at fixed total flow rate. The etch rate at each ICP/RF power is 0.1–0.2 μm/min higher for Cl{sub 2}/Ar mixture mainly due to higher Cl dissociation efficiency of Ar additive that readily provides Cl ion/radical for reaction in comparison to Cl{sub 2}/BCl{sub 3} mixture. Cl{sub 2}/Ar mixture also leads to better photoresist mask selectivity. The etch-induced roughness is investigated using atomic force microscopy. Cl{sub 2}/Ar etching has resulted in lower root-mean-square roughness of GaN etched surface in comparison to Cl{sub 2}/BCl{sub 3} etching due to increased Ar ion energy and flux with ICP/RF power that enhances the sputter removal of etch product. The GaN surface damage after etching is also evaluated using room temperature photoluminescence and found to be increasing with ICP/RF power for both the etch chemistries with higher degree of damage in Cl{sub 2}/BCl{sub 3} etching under same condition.

  16. Evidence for cerebellar motor functional reorganization in brain tumor patients: An fMRI study.

    PubMed

    Kurabe, Satoshi; Itoh, Kosuke; Nakada, Tsutomu; Fujii, Yukihiko

    2016-05-27

    Functional reorganization of the motor system following brain damage has been studied extensively in stroke patients, in which not only the cerebrum but also the cerebellum (Cbll) undergoes substantial reorganization. However, the role of Cbll in motor functional reorganization in brain tumor patients remains poorly investigated. Because brain damages in brain tumor patients occur much more slowly than in stroke patients, the neural mechanisms for motor functional reorganization might differ between these two disease conditions. This functional magnetic resonance imaging (fMRI) study investigated whether Cbll constitutes the neural substrates for motor functional reorganization in eighteen supratentorial brain tumor patients who exhibited no clinical signs of paresis. The patients and normal volunteers underwent a unilateral hand movement task. In the patients, the locus of primary sensory motor (SM1) activation during contralesional hand movement was significantly displaced by the tumor, suggesting functional compromise and/or reorganization in the central sulcus region. In addition, their contralesional Cbll activation during contralesional hand movement was substantially increased as compared to normal controls. The finding represents the first conclusive evidence that Cbll is involved in the motor-related functional reorganization in patients with brain tumor. PMID:27102144

  17. Reveal genes functionally associated with ACADS by a network study.

    PubMed

    Chen, Yulong; Su, Zhiguang

    2015-09-15

    Establishing a systematic network is aimed at finding essential human gene-gene/gene-disease pathway by means of network inter-connecting patterns and functional annotation analysis. In the present study, we have analyzed functional gene interactions of short-chain acyl-coenzyme A dehydrogenase gene (ACADS). ACADS plays a vital role in free fatty acid β-oxidation and regulates energy homeostasis. Modules of highly inter-connected genes in disease-specific ACADS network are derived by integrating gene function and protein interaction data. Among the 8 genes in ACADS web retrieved from both STRING and GeneMANIA, ACADS is effectively conjoined with 4 genes including HAHDA, HADHB, ECHS1 and ACAT1. The functional analysis is done via ontological briefing and candidate disease identification. We observed that the highly efficient-interlinked genes connected with ACADS are HAHDA, HADHB, ECHS1 and ACAT1. Interestingly, the ontological aspect of genes in the ACADS network reveals that ACADS, HAHDA and HADHB play equally vital roles in fatty acid metabolism. The gene ACAT1 together with ACADS indulges in ketone metabolism. Our computational gene web analysis also predicts potential candidate disease recognition, thus indicating the involvement of ACADS, HAHDA, HADHB, ECHS1 and ACAT1 not only with lipid metabolism but also with infant death syndrome, skeletal myopathy, acute hepatic encephalopathy, Reye-like syndrome, episodic ketosis, and metabolic acidosis. The current study presents a comprehensible layout of ACADS network, its functional strategies and candidate disease approach associated with ACADS network. PMID:26045367

  18. Yeast studies reveal moonlighting functions of the ancient actin cytoskeleton.

    PubMed

    Sattlegger, Evelyn; Chernova, Tatiana A; Gogoi, Neeku M; Pillai, Indu V; Chernoff, Yury O; Munn, Alan L

    2014-08-01

    Classic functions of the actin cytoskeleton include control of cell size and shape and the internal organization of cells. These functions are manifest in cellular processes of fundamental importance throughout biology such as the generation of cell polarity, cell migration, cell adhesion, and cell division. However, studies in the unicellular model eukaryote Saccharomyces cerevisiae (Baker's yeast) are giving insights into other functions in which the actin cytoskeleton plays a critical role. These include endocytosis, control of protein translation, and determination of protein 3-dimensional shape (especially conversion of normal cellular proteins into prions). Here, we present a concise overview of these new "moonlighting" roles for the actin cytoskeleton and how some of these roles might lie at the heart of important molecular switches. This is an exciting time for researchers interested in the actin cytoskeleton. We show here how studies of actin are leading us into many new and exciting realms at the interface of genetics, biochemistry, and cell biology. While many of the pioneering studies have been conducted using yeast, the conservation of the actin cytoskeleton and its component proteins throughout eukaryotes suggests that these new roles for the actin cytoskeleton may not be restricted to yeast cells but rather may reflect new roles for the actin cytoskeleton of all eukaryotes. PMID:25138357

  19. Yeast studies reveal moonlighting functions of the ancient actin cytoskeleton

    PubMed Central

    Sattlegger, Evelyn; Chernova, Tatiana A.; Gogoi, Neeku M.; Pillai, Indu V.; Chernoff, Yury O.; Munn, Alan L.

    2014-01-01

    Classic functions of the actin cytoskeleton include control of cell size and shape and the internal organisation of cells. These functions are manifest in cellular processes of fundamental importance throughout biology such as the generation of cell polarity, cell migration, cell adhesion and cell division. However, studies in the unicellular model eukaryote Saccharomyces cerevisiae (Baker's yeast) are giving insights into other functions in which the actin cytoskeleton plays a critical role. These include endocytosis, control of protein translation and determination of protein 3-dimensional shape (especially conversion of normal cellular proteins into prions). Here we present a concise overview of these new "moonlighting" roles for the actin cytoskeleton and how some of these roles might lie at the heart of important molecular switches. This is an exciting time for researchers interested in the actin cytoskeleton. We show here how studies of actin are leading us into many new and exciting realms at the interface of genetics, biochemistry and cell biology. While many of the pioneering studies have been conducted using yeast, the conservation of the actin cytoskeleton and its component proteins throughout eukaryotes suggests that these new roles for the actin cytoskeleton may not be restricted to yeast cells but rather may reflect new roles for the actin cytoskeleton of all eukaryotes. PMID:25138357

  20. Clinical usefulness of Adeli suit therapy for improving gait function in children with spastic cerebral palsy: a case study

    PubMed Central

    Lee, Byoung-Hee

    2016-01-01

    [Purpose] The purpose of this study was to determine the effects of Adeli suit therapy (AST) on gross motor function and gait function in children with cerebral palsy. [Subjects and Methods] Two participants with spastic cerebral palsy were recruited to undergo AST. AST was applied in 60-minute sessions, five times per week, with 20 sessions total over 4 weeks. Assessments of gross motor function, spatiotemporal parameters, and functional ambulation performance for gait were conducted. [Results] Gross motor function, cadence, and functional ambulation performance improved after the intervention in both cases. [Conclusion] Although additional follow-up studies are required, the results demonstrated improved gross motor function and functional ambulation performance in the children with cerebral palsy. These findings suggest a variety of applications for conservative therapeutic methods that require future clinical trials in children with cerebral palsy. PMID:27390453

  1. Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B

    PubMed Central

    WANG, Linda; BIM, Odair; LOPES, Adolfo Coelho de Oliveira; FRANCISCONI-DOS-RIOS, Luciana Fávaro; MAENOSONO, Rafael Massunari; D’ALPINO, Paulo Henrique Perlatti; HONÓRIO, Heitor Marques; ATTA, Maria Teresa

    2016-01-01

    ABSTRACT Objective This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system. Material and Methods The adhesives Adper Scotchbond Multi-Purpose (MP) and Clearfil SE Bond (SE) were mixed with 0.1 mg/mL of RB. For the WS/WSL tests, cured resin disks (5.0 mm in diameter x 0.8 mm thick) were prepared and assigned into four groups (n=10): MP, MP-RB, SE, and SE-RB. For µTBS assessment, extracted human third molars (n=40) had the flat occlusal dentin prepared and assigned into the same experimental groups (n=10). After the bonding and restoration procedures, specimens were sectioned in rectangular beams, stored in water and tested after seven days or after 12 months. The failure mode of fractured specimens was qualitatively evaluated under optical microscope (x40). Data from WS/WSL and µTBS were assessed by one-way and three-way ANOVA, respectively, and Tukey’s test (α=5%). Results RB increased the WSL of MP and SE. On the other hand, WS of both MP and SE was not affected by the addition of RB. No significance in µTBS between MP and MP-RB for seven days or one year was observed, whereas for SE a decrease in the µTBS means occurred in both storage times. Conclusions RB should be incorporated into non-simplified DBSs with caution, as it can interfere with their physical-mechanical properties, leading to a possible misinterpretation of bonded interface. PMID:27556201

  2. Column studies on transport of deicing additive benzotriazole in a sandy aquifer and a zerovalent iron barrier.

    PubMed

    Jia, Yu; Breedveld, Gijs D; Aagaard, Per

    2007-11-01

    Benzotriazole (BTA), a chemical with wide industrial applications, is a typical additive in deicer/anti-icer used at airport. To achieve a better understanding of the transport behaviour and environmental fate of BTA, laboratory column studies have been performed on subsoil samples from Oslo Airport, Gardermoen. To explore possibilities for aquifer remediation, BTA behaviour was also studied in a column of granular zerovalent iron (Fe(0)). The subsoil column study demonstrates a very limited retardation of BTA. Consecutive loadings of BTA of the subsoil column showed no change of the break-through curve (BTC) and complete desorption was observed. The sorption behaviour of BTA to metallic iron (Fe(0)) was rather complex. Considerable retardation was observed in the Fe(0) column and repeated BTA loading resulted in an earlier break-through. Between 20% and 50% of the input concentration was retained permanently in the iron (Fe(0)) column. The BTA sorption to metallic iron was found to be enhanced by chloride which lowered the break-through concentration (i.e the C/C(0) plateau). The fraction of BTA remaining in the iron column was found to vary with the flow rate, indicating a time dependant multilayer sorption mechanism. The steady increase in the amount of adsorbed BTA to the iron column during loading corresponds to a rather strong bonding of 4-15 BTA layers to the iron surface. A very slow desorption of BTA was observed; even after flushing with 753 pore volumes of BTA free water, 7.5% of the BTA remained in the column. A geochemical model was developed based on PHREEQC-2 to simulate the sorption and transport of BTA in the tested materials. The BTA sorption was modelled with Freundlich sorption isotherms, as earlier determined in batch experiments. A slight adjustment of the Freundlich parameters was required to fit the observed column break-through. However, our model was not able to simulate the long-term retainment of BTA in the granular iron columns. The

  3. Towards a phylogenetic generic classification of Thelypteridaceae: Additional sampling suggests alterations of neotropical taxa and further study of paleotropical genera.

    PubMed

    Almeida, Thaís Elias; Hennequin, Sabine; Schneider, Harald; Smith, Alan R; Batista, João Aguiar Nogueira; Ramalho, Aline Joseph; Proite, Karina; Salino, Alexandre

    2016-01-01

    Thelypteridaceae is one of the largest fern families, having about 950 species and a cosmopolitan distribution but with most species occurring in tropical and subtropical regions. Its generic classification remains controversial, with different authors recognizing from one up to 32 genera. Phylogenetic relationships within the family have not been exhaustively studied, but previous studies have confirmed the monophyly of the lineage. Thus far, sampling has been inadequate for establishing a robust hypothesis of infrafamilial relationships within the family. In order to understand phylogenetic relationships within Thelypteridaceae and thus to improve generic reclassification, we expand the molecular sampling, including new samples of Old World taxa and, especially, many additional neotropical representatives. We also explore the monophyly of exclusively or mostly neotropical genera Amauropelta, Goniopteris, Meniscium, and Steiropteris. Our sampling includes 68 taxa and 134 newly generated sequences from two plastid genomic regions (rps4-trnS and trnL-trnF), plus 73 rps4 and 72 trnL-trnF sequences from GenBank. These data resulted in a concatenated matrix of 1980 molecular characters for 149 taxa. The combined data set was analyzed using maximum parsimony and bayesian inference of phylogeny. Our results are consistent with the general topological structure found in previous studies, including two main lineages within the family: phegopteroid and thelypteroid. The thelypteroid lineage comprises two clades; one of these included the segregates Metathelypteris, Coryphopteris, and Amauropelta (including part of Parathelypteris), whereas the other comprises all segregates of Cyclosorus s.l., such as Goniopteris, Meniscium, and Steiropteris (including Thelypteris polypodioides, previously incertae sedis). The three mainly neotropical segregates were found to be monophyletic but nested in a broadly defined Cyclosorus. The fourth mainly neotropical segregate, Amauropelta

  4. Studies of higher nervous activity in functional phychoses.

    PubMed

    Astrup, C

    1975-01-01

    Psychiatric illnesses can be conceived of as experiments of nature, providing a variety of pathopsychological mechanisms which may elucidate normal psychological processes. Clinically the reactive psychoses are predominantly psychogenic reaction types. They present disturbances of higher nervous activity, similar to those of the neuroses. The unconditional reflex activity is practically as in normal controls, and the most outstanding finding was the large effect of psychodynamic complex structures. This is a physiological parallel to the clinical manifestations with great concern over experienced mental trauma. In the manic-depressive psychoses the most characteristic feature is a marked disturbance of unconditional reflex activity. This factor may be an important physiological mechanism underlying the more biological than psychodynamic reaction type and partly explain the changes of mood and associated interferences with sleep, body weight, sexual activity, aggression and other instinctual and vegetative functions. Schizophrenic psychoses also present changes of unconditional reflex activity, predominantly in the direction of inhibition of response. In addition there are severe dissociations within and between the three levels of unconditional reflexes and the two signaling systems. It is suggested that schizophrenia represents a functional maladaptation, which can be explained from the principles of autokinesis and schizokinesis established by Gantt in animal experiments. Prognostic models based on experimentally established impairment of performances were shown to predict long-term risks of schizophrenic defects just as well as models based on constellations of clinical symptoms. I would predict that psychophysiology and experimental psychology will become increasingly more important for establishing diagnosis and prognosis in the functional psychoses. The data of this article point toward a basis for a prophylactic psychiatry. PMID:1236657

  5. United abominations: Density functional studies of heavy metal chemistry

    SciTech Connect

    Schoendorff, George

    2012-01-01

    Carbonyl and nitrile addition to uranyl (UO22+) are studied. The competition between nitrile and water ligands in the formation of uranyl complexes is investigated. The possibility of hypercoordinated uranyl with acetone ligands is examined. Uranyl is studied with diactone alcohol ligands as a means to explain the apparent hypercoordinated uranyl. A discussion of the formation of mesityl oxide ligands is also included. A joint theory/experimental study of reactions of zwitterionic boratoiridium(I) complexes with oxazoline-based scorpionate ligands is reported. A computational study was done of the catalytic hydroamination/cyclization of aminoalkenes with zirconium-based catalysts. Techniques are surveyed for programming for graphical processing units (GPUs) using Fortran.

  6. Small Molecule Approach to Study the Function of Mitotic Kinesins.

    PubMed

    Al-Obaidi, Naowras; Kastl, Johanna; Mayer, Thomas U

    2016-01-01

    Mitotic motor proteins of the kinesin superfamily are critical for the faithful segregation of chromosomes and the formation of the two daughter cells during meiotic and mitotic M-phase. Of the 45 human kinesins, roughly a dozen are involved in the assembly of the bipolar spindle, alignment of chromosomes at the spindle equator, chromosome segregation, and cytokinesis. The functions of kinesins in these processes are highly diverse and include the transport of cargo molecules, sliding and bundling of microtubules, and regulation of microtubule dynamics. In light of this multitude of diverse functions and the complex functional interplay of different kinesins during M-phase, it is not surprising that one of the greatest challenges in cell biology is the functional dissection of individual motor proteins. Reversible and fast acting small molecules are powerful tools to accomplish this challenge. However, the validity of conclusions drawn from small molecule studies strictly depends on compound specificity. In this chapter, we present methods for the identification of small molecule inhibitors of a motor protein of interest. In particular, we focus on a protein-based large throughput screen to identify inhibitors of the ATPase activity of kinesins. Furthermore, we provide protocols and guidelines for secondary screens to validate hits and select for specific inhibitors. PMID:27193856

  7. Functional models of power electronic components for system studies

    NASA Technical Reports Server (NTRS)

    Tam, Kwa-Sur; Yang, Lifeng; Dravid, Narayan

    1991-01-01

    A novel approach to model power electronic circuits has been developed to facilitate simulation studies of system-level issues. The underlying concept for this approach is to develop an equivalent circuit, the functional model, that performs the same functions as the actual circuit but whose operation can be simulated by using larger time step size and the reduction in model complexity, the computation time required by a functional model is significantly shorter than that required by alternative approaches. The authors present this novel modeling approach and discuss the functional models of two major power electronic components, the DC/DC converter unit and the load converter, that are being considered by NASA for use in the Space Station Freedom electric power system. The validity of these models is established by comparing the simulation results with available experimental data and other simulation results obtained by using a more established modeling approach. The usefulness of this approach is demonstrated by incorporating these models into a power system model and simulating the system responses and interactions between components under various conditions.

  8. Functional Analysis of the Human Genome:. Study of Genetic Disease

    NASA Astrophysics Data System (ADS)

    Tsui, Lap-Chee

    2003-04-01

    I will divide my remarks into 3 parts. First, I will give a brief summary of the Human Genome Project. Second, I will describe our work on human chromosome 7 to illustrate how we could contribute to the Project and disease research. Third, I would like to bring across the argument that study of genetic disease is an integral component of the Human Genome Project. In particular, I will use cystic fibrosis as an example to elaborate why I consider disease study is a part of functional genomics.

  9. Density Functional Study of the structural properties in Tamoxifen

    NASA Astrophysics Data System (ADS)

    de Coss-Martinez, Romeo; Tapia, Jorge A.; Quijano-Quiñones, Ramiro F.; Canto, Gabriel I.

    2013-03-01

    Using the density functional theory, we have studied the structural properties of Tamoxifen. The calculations were performed with two methodological approaches, which were implemented in SIESTA and Spartan codes. For SIESTA, we considerate a linear combination of atomic orbitals method, using pseudopotentials and the van der Waals approximation for the exchange-correlation potential. Here we analyzed and compared the atomic structure between our results and other theoretical study. We found differences in the bond lengths between the results, that could be attributed to code approaches in each one. This work was supported under Grant FOMIX 2011-09 N: 170297 of Ph.D. A. Tapia.

  10. Functional Studies of Regulatory Genes in the Sea Urchin Embryo

    NASA Astrophysics Data System (ADS)

    Cavalieri, Vincenzo; Bernardo, Maria Di; Spinelli, Giovanni

    Sea urchin embryos are characterized by an extremely simple mode of development, rapid cleavage, high transparency, and well-defined cell lineage. Although they are not suitable for genetic studies, other approaches are successfully used to unravel mechanisms and molecules involved in cell fate specification and morphogenesis. Microinjection is the elective method to study gene function in sea urchin embryos. It is used to deliver precise amounts of DNA, RNA, oligonucleotides, peptides, or antibodies into the eggs or even into blastomeres. Here we describe microinjection as it is currently applied in our laboratory and show how it has been used in gene perturbation analyses and dissection of cis-regulatory DNA elements.

  11. Enhancing the functionality of cotton fabric by physical and chemical pre-treatments: A comparative study.

    PubMed

    Gargoubi, Sondes; Tolouei, Ranna; Chevallier, Pascale; Levesque, Lucie; Ladhari, Neji; Boudokhane, Chedly; Mantovani, Diego

    2016-08-20

    Recently, antimicrobial and decontaminating textiles, such as cotton a natural carbohydrate polymer, are generating more attention. Plant materials used for natural dyes are expected to impart biofunctional properties and high added valued functional textiles. In the current study, surface modification of cotton to maximize the dye amount on the surface has been investigated. Physical modification using nitrogen-hydrogen plasma, chemical modification using chitosan and chemical modification using dopamine as biopolymers imparting amino groups were explored. Furthermore, dye exhaustion of curcumin, as a natural functional dye has been studied. Dye stability tests were also performed after fabric washing using hospital washing protocol to predict the durability of the functionalizations. The results demonstrated that cotton surfaces treated with dopamine exhibit a high level of dye uptake (78%) and a good washing fastness. The use of non-toxic and natural additives during cotton finishing process could give the opportunity of cradle to cradle design for antimicrobial textile industries. PMID:27178905

  12. Formation pathways of DMSO(2) in the addition channel of the OH-initiated DMS oxidation: A theoretical study.

    PubMed

    Ramírez-Anguita, Juan M; González-Lafont, Angels; Lluch, José M

    2009-07-15

    The production of dimethyl sulfoxide (DMSO) and dimethyl sulfone (DMSO(2)) in the dimethyl sulfide (DMS) degradation scheme initiated by the hydroxyl (OH) radical has been shown to be very sensitive to nitrogen oxides (NO(x)) levels. In the present work we have explored the potential energy surfaces corresponding to several reaction pathways which yield DMSO(2) from the CH(3)S(O)(OH)CH(3) adduct [including the formation of CH(3)S(O)(OH)CH(3) from the reaction of DMSO with OH] and the reaction channels that yield DMSO or/and DMSO(2) from the CH(3)S(O(2))(OH)CH(3) adduct are also studied. The formation of the CH(3)S(O(2))(OH)CH(3) adduct from CH(3)S(OH)CH(3) (DMS-OH) and O(2) was analyzed in our previous work. All these pathways due to the presence of NO(x) (NO and NO(2)) and also due to the reactions with O(2), OH and HO(2) are compared with the objective of inferring their kinetic relevance in the laboratory experiments that measure DMSO(2) (and DMSO) formation yields. In particular, our theoretical results clearly show the existence of NO(x)-dependent pathways leading to the formation of DMSO(2), which could explain some of these experimental results in comparison with experimental measurements carried out in NO(x)-free conditions. Our results indicate that the relative importance of the addition channel in the DMS oxidation process can be dependent on the NO(x) content of chamber experiments and of atmospheric conditions. PMID:19072765

  13. Addition of straw or sawdust to mitigate greenhouse gas emissions from slurry produced by housed cattle: a field incubation study.

    PubMed

    van der Weerden, Tony J; Luo, Jiafa; Dexter, Moira

    2014-07-01

    The use of housed wintering systems (e.g., barns) associated with dairy cattle farming is increasing in southern New Zealand. Typically, these wintering systems use straw or a woodmix as bedding material. Ammonia (NH) and greenhouse gas (GHG) emissions (nitrous oxide [NO] and methane [CH]) associated with storage of slurry + bedding material from wintering systems is poorly understood. A field incubation study was conducted to determine such emissions from stored slurry where bedding material (straw and sawdust) was added at two rates and stored for 7 mo. During the first 4 mo of storage, compared with untreated slurry, the addition of sawdust significantly reduced NH and CH emissions from 29 to 3% of the initial slurry nitrogen (N) content and from 0.5 to <0.01% of the initial slurry carbon (C) content. However, sawdust enhanced NO emissions to 0.7% of the initial slurry-N content, compared with <0.01% for untreated slurry. Straw generally had an intermediate effect. Extending the storage period to 7 mo increased emissions from all treatments. Ammonia emissions were inversely related to the slurry C:N ratio and total solid (TS) content, and CH emissions were inversely related to slurry TS content. Mitigation of GHG emissions from stored slurry can be achieved by reducing the storage period as much as possible after winter slurry collection, providing ground conditions allow access for land spreading and nutrient inputs match pasture requirements. Although adding bedding material can reduce GHG emissions during storage, increased manure volumes for carting and spreading need to be considered. PMID:25603082

  14. Effect of Orthostasis on Endothelial Function: A Gender Comparative Study

    PubMed Central

    Goswami, Nandu; Gorur, Paavan; Pilsl, Ulrike; Anyaehie, Bond; Green, David A.; Bondarenko, Alexander I.; Roessler, Andreas; Hinghofer-Szalkay, Helmut G.

    2013-01-01

    As the vascular endothelium has multiple functions, including regulation of vascular tone, it may play a role in the pathophysiology of orthostatic intolerance. We investigated the effect of orthostasis on endothelial function using EndoPAT®, a non-invasive and user-independent method, and across gender. As sex steroid hormones are known to affect endothelial function, this study examined the potential effect of these hormones on the endothelial response to orthostasis by including females at different phases of the menstrual cycle (follicular and luteal—where the hormone balance differs), and females taking an oral contraceptive. A total of 31 subjects took part in this study (11 males, 11 females having normal menstrual cycles and 9 females taking oral contraceptive). Each subject made two visits for testing; in the case of females having normal menstrual cycles the first session was conducted either 1–7 (follicular) or 14–21 days (luteal) after the start of menstruation, and the second session two weeks later, i.e., during the other phase, respectively. Endothelial function was assessed at baseline and following a 20-min orthostatic challenge (active standing). The EndoPAT® index increased from 1.71 ± 0.09 (mean ± SEM) at baseline to 2.07 ± 0.09 following orthostasis in females (p<0.001). In males, the index increased from 1.60 ± 0.08 to 1.94 ± 0.13 following orthostasis (p<0.001). There were no significant differences, however, in the endothelial response to orthostasis between females and males, menstrual cycle phases and the usage of oral contraceptive. Our results suggest an increased vasodilatatory endothelial response following orthostasis in both females and males. The effect of gender and sex hormones on the endothelial response to orthostasis appears limited. Further studies are needed to determine the potential role of this post orthostasis endothelial response in the pathophysiology of orthostatic intolerance. PMID:24147147

  15. Lung function in West Sussex firemen: a four year study.

    PubMed

    Horsfield, K; Guyatt, A R; Cooper, F M; Buckman, M P; Cumming, G

    1988-02-01

    Although firefighting is a hazardous occupation, published evidence of long-term lung damage in firemen is inconsistent. A group of 96 men from the West Sussex Fire Brigade, which covers a simi-rural, semi-urban area, were followed up for between one and four years. They included 31 non-smokers, 40 smokers, and 25 ex-smokers. After four years 12 firemen had been lost to the study. A control group of 69 volunteers, consisting of non-smoking men from various other occupations, were followed up in parallel. Lung function tests, covering a wider range than has been previously used in similar studies, were repeated six monthly for two years and annually for a further two years. The results were expressed in terms of the rate of change with time of the lung function variables. Many of the variables deteriorated in both firemen and controls, but the rate of deterioration was greater in the controls than the firemen for vital capacity, ratio of residual volume to total lung capacity, FEV1, FVC, peak expiratory flow (PEF), flow at 50% and 25% remaining vital capacity (V50 and V25 respectively), and airways resistance (Raw). With respect to PEF, V50, V25, and Raw the control subjects deteriorated more rapidly even than the smokers and ex-smokers among the firemen. Alveolar mixing efficiency (AME), a measure of small airways function, did not change significantly over the study period in any group. Non-smoking firemen had the highest mean value of AME, decreasing through ex-smokers, controls, and smokers. We conclude that these results show no evidence of chronic lung damage in West Sussex firemen; indeed, the firemen as a group show a lower rate of deterioration of lung function with age than do the control subjects. This is attributed to the selection of fit men for the service, continued physical training, and the regular use of breathing apparatus. PMID:3342193

  16. Photoemission studies of fluorine functionalized porous graphitic carbon

    SciTech Connect

    Ganegoda, Hasitha; Olive, Daniel; Cheng, Lidens; Segre, Carlo U.; Terry, Jeff; Jensen, David S.; Linford, Matthew R.

    2012-03-01

    Porous graphitic carbon (PGC) has unique properties desirable for liquid chromatography applications when used as a stationary phase. The polar retention effect on graphite (PREG) allows efficient separation of polar and non-polar solutes. Perfluorinated hydrocarbons however lack polarizabilty and display strong lipo- and hydrophobicity, hence common lipophilic and hydrophilic analytes have low partition coefficiency in fluorinated stationary phases. Attractive interaction between fluorinated stationary phase and fluorinated analytes results in strong retention compared to non-fluorinated analytes. In order to change the selectivities of PGC, it is necessary to develop a bonded PGC stationary phase. In this study, we have synthesized perfluorinated, PGC using hepatadecafluoro-1-iodooctane, under different temperature conditions. Surface functionalization of the raw material was studied using photoelectron spectroscopy (PES). Results indicate the existence of fluorine containing functional groups, -CF, -CF{sub 2} along with an intercalated electron donor species. Multiple oxygen functional groups were also observed, likely due to the presence of oxygen in the starting material. These oxygen species may be responsible for significant modifications to planer and tetrahedral carbon ratios.

  17. Graphene oxide and adsorption of chloroform: A density functional study

    NASA Astrophysics Data System (ADS)

    Kuisma, Elena; Hansson, C. Fredrik; Lindberg, Th. Benjamin; Gillberg, Christoffer A.; Idh, Sebastian; Schröder, Elsebeth

    2016-05-01

    Chlorinated hydrocarbon compounds are of environmental concerns, since they are toxic to humans and other mammals, and are widespread, and exposure is hard to avoid. Understanding and improving methods to reduce the amount of the substances are important. We present an atomic-scale calculational study of the adsorption of chlorine-based substance chloroform (CHCl3) on graphene oxide, as a step in estimating the capacity of graphene oxide for filtering out such substances, e.g., from drinking water. The calculations are based on density functional theory, and the recently developed consistent-exchange functional for the van der Waals density-functional method is employed. We obtain values of the chloroform adsorption energy varying from roughly 0.2 to 0.4 eV per molecule. This is comparable to previously found results for chloroform adsorbed directly on clean graphene, using similar calculations. In a wet environment, like filters for drinking water, the graphene will not stay clean and will likely oxidize, and thus adsorption onto graphene oxide, rather than clean graphene, is a more relevant process to study.

  18. Graphene oxide and adsorption of chloroform: A density functional study.

    PubMed

    Kuisma, Elena; Hansson, C Fredrik; Lindberg, Th Benjamin; Gillberg, Christoffer A; Idh, Sebastian; Schröder, Elsebeth

    2016-05-14

    Chlorinated hydrocarbon compounds are of environmental concerns, since they are toxic to humans and other mammals, and are widespread, and exposure is hard to avoid. Understanding and improving methods to reduce the amount of the substances are important. We present an atomic-scale calculational study of the adsorption of chlorine-based substance chloroform (CHCl3) on graphene oxide, as a step in estimating the capacity of graphene oxide for filtering out such substances, e.g., from drinking water. The calculations are based on density functional theory, and the recently developed consistent-exchange functional for the van der Waals density-functional method is employed. We obtain values of the chloroform adsorption energy varying from roughly 0.2 to 0.4 eV per molecule. This is comparable to previously found results for chloroform adsorbed directly on clean graphene, using similar calculations. In a wet environment, like filters for drinking water, the graphene will not stay clean and will likely oxidize, and thus adsorption onto graphene oxide, rather than clean graphene, is a more relevant process to study. PMID:27179497

  19. Photoemission studies of fluorine functionalized porous graphitic carbon

    NASA Astrophysics Data System (ADS)

    Ganegoda, Hasitha; Jensen, David S.; Olive, Daniel; Cheng, Lidens; Segre, Carlo U.; Linford, Matthew R.; Terry, Jeff

    2012-03-01

    Porous graphitic carbon (PGC) has unique properties desirable for liquid chromatography applications when used as a stationary phase. The polar retention effect on graphite (PREG) allows efficient separation of polar and non-polar solutes. Perfluorinated hydrocarbons however lack polarizabilty and display strong lipo- and hydrophobicity, hence common lipophilic and hydrophilic analytes have low partition coefficiency in fluorinated stationary phases. Attractive interaction between fluorinated stationary phase and fluorinated analytes results in strong retention compared to non-fluorinated analytes. In order to change the selectivities of PGC, it is necessary to develop a bonded PGC stationary phase. In this study, we have synthesized perfluorinated, PGC using hepatadecafluoro-1-iodooctane, under different temperature conditions. Surface functionalization of the raw material was studied using photoelectron spectroscopy (PES). Results indicate the existence of fluorine containing functional groups, -CF, -CF2 along with an intercalated electron donor species. Multiple oxygen functional groups were also observed, likely due to the presence of oxygen in the starting material. These oxygen species may be responsible for significant modifications to planer and tetrahedral carbon ratios.

  20. The Role of Control Functions in Mentalizing: Dual-Task Studies of Theory of Mind and Executive Function

    ERIC Educational Resources Information Center

    Bull, Rebecca; Phillips, Louise H.; Conway, Claire A.

    2008-01-01

    Conflicting evidence has arisen from correlational studies regarding the role of executive control functions in Theory of Mind. The current study used dual-task manipulations of executive functions (inhibition, updating and switching) to investigate the role of these control functions in mental state and non-mental state tasks. The "Eyes"…