Science.gov

Sample records for additional group received

  1. Stennis group receives NESC award

    NASA Technical Reports Server (NTRS)

    2009-01-01

    The NASA Engineering & Safety Center recently presented its Group Achievement Award to a Stennis team in recognition of technical excellence in evaluating the operational anomalies and reliability improvements associated with the space shuttle engine cut-off system. Stennis employees receiving the award were: (standing, l to r) Freddie Douglas (NASA), George Drouant (Jacobs Technology Inc.), Fred Abell (Jacobs), Robert Drackett (Jacobs) and Mike Smiles (NASA); (seated, l to r): Binh Nguyen (Jacobs), Stennis Director Gene Goldman and Joseph Lacker (NASA). Phillip Hebert of NASA is not pictured.

  2. 26. GENERAL VIEW OF SHIPPING AND RECEIVING ROOM, 1923 ADDITION, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. GENERAL VIEW OF SHIPPING AND RECEIVING ROOM, 1923 ADDITION, FIRST FLOOR, LOOKING NORTHWEST. FLAMMABLE TEST ROOM IS ON EXTREME RIGHT - Underwriters' Laboratories, 207-231 East Ohio Street, Chicago, Cook County, IL

  3. Micronucleus frequencies in groups receiving external or internal radiation

    PubMed Central

    Özdal, Ayşegül; Erselcan, Taner; Özdemir, Öztürk; Silov, Güler; Erdoğan, Zeynep; Turhal, Özgül

    2016-01-01

    Objective: In the current study, we aimed to explore whether there is alteration between pre- and post-treatment micronucleus (MN) frequencies induced by internal and external ionizing radiation. Materials and Methods: The study enrolled a total of 67 patients including patients admitted to our hospital for treatment of hyperthyroidism (n = 17), scanning with low-dose I-131 (n = 15), and ablative therapy with high-dose I-131 (n = 15) at Department of Nuclear Medicine as well as patients with different diagnoses receiving external radiotherapy with various doses and durations at Department of Radiation Oncology (n = 20). Thirty-two patients who received radioactive iodine and returned for a follow-up visit at 1 month. Results: Considering both pre- and post-treatment MN frequencies of each group, lowest MN frequencies were detected for patients undergoing screening with low-dose I-131, and highest MN frequencies were found in radiotherapy patients. Comparison of pre- and post-treatment MN frequencies among hyperthyroidism, when pre- and post-treatment MN frequencies compared among hyperthyroidism, I-131 whole body scanning, ablation, and radiotherapy patient groups differences between MN frequencies were significant for each group (P < 0.05). Conclusion: Our study showed that MN analysis might be of value in determining chromosome damage that could potentially occur in patients exposed to internal and external radiation. PMID:27385886

  4. 27 CFR 1.83 - Acquiring or receiving distilled spirits in bulk for addition to wine.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Acquiring or receiving distilled spirits in bulk for addition to wine. 1.83 Section 1.83 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BASIC PERMIT REQUIREMENTS UNDER THE FEDERAL ALCOHOL ADMINISTRATION...

  5. Additive Bilingualism, Schooling, and Special Education: A Minority Group Perspective.

    ERIC Educational Resources Information Center

    Landry, R.

    1987-01-01

    The effect of schooling on the acquisition of an additive type of bilingualism is examined, focusing on additive bilingualism's relation to the ethnolinguistic vitality of linguistic groups and contributions of individual networks of linguistic contacts. A special and regular education merger without domination by a single cultural perspective is…

  6. Optimal receiver design for diffusive molecular communication with flow and additive noise.

    PubMed

    Noel, Adam; Cheung, Karen C; Schober, Robert

    2014-09-01

    In this paper, we perform receiver design for a diffusive molecular communication environment. Our model includes flow in any direction, sources of information molecules in addition to the transmitter, and enzymes in the propagation environment to mitigate intersymbol interference. We characterize the mutual information between receiver observations to show how often independent observations can be made. We derive the maximum likelihood sequence detector to provide a lower bound on the bit error probability. We propose the family of weighted sum detectors for more practical implementation and derive their expected bit error probability. Under certain conditions, the performance of the optimal weighted sum detector is shown to be equivalent to a matched filter. Receiver simulation results show the tradeoff in detector complexity versus achievable bit error probability, and that a slow flow in any direction can improve the performance of a weighted sum detector.

  7. 40 CFR 35.4060 - How much money can my group receive through a TAG?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false How much money can my group receive... AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance How Much Money Tags Provide § 35.4060 How much money can my group receive through a TAG? The following table shows...

  8. 40 CFR 35.4060 - How much money can my group receive through a TAG?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false How much money can my group receive... AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance How Much Money Tags Provide § 35.4060 How much money can my group receive through a TAG? The following table shows...

  9. Addition Theorems, Formal Group Laws and Integrable Systems

    NASA Astrophysics Data System (ADS)

    Buchstaber, V. M.; Bunkova, E. Yu.

    2010-11-01

    We consider elliptic curves, given in the Weierstrass parametrization by the equation y2+μ1xy+μ3y = x3+μ2x2+μ4x+μ6. In Tate coordinates t = -x/y and s = -1/y, the geometric addition laws on this curves correspond to the general elliptic formal group law over the ring Z[μ1,μ2,μ3,μ4,μ6]. This formal group law is well-known in the number theory and cryptography. One can find this law in recent works on the theory of elliptic functions and algebraic topology. In the focus of our interest are questions, important from the point of view of Hirzebruch genera and the theory of integrable systems (see references).

  10. A Comparison of Group-Oriented Contingencies for Addition Fluency

    ERIC Educational Resources Information Center

    Gross, Thomas J.; Duhon, Gary J.; Shutte, Greg; Rowland, Julie E.

    2016-01-01

    Math fact fluency is critical for understanding complex mathematics. Explicit timing interventions have shown promise for improving math fluency, and they may benefit from being paired with group-oriented contingencies. Further, investigations of independent and dependent group-oriented contingencies would help to identify their relative…

  11. Nonylphenol ethoxylates and other additives in aircraft deicers, antiicers, and waters receiving airport runoff

    USGS Publications Warehouse

    Corsi, Steven R.; Zitomer, Daniel H.; Field, Jennifer A.; Cancilla, Devon A.

    2003-01-01

    Samples of nine different formulations of aircraft deicer and antiicer fluids (ADAF) were screened for the presence of selected surfactants. Nonylphenol ethoxylates (NPnEO) were identified in three ADAF formulations, octylphenol ethoxylates were identified in two formulations, and six formulations contained alcohol ethoxylates. A preliminary field study was conducted at General Mitchell International Airport, Milwaukee, WI, to quantify NPnEO (n = 1-15) and one of its byproducts, nonylphenol (NP), in airport runoff. Samples were collected from two airport outfalls, from the receiving stream, and from an upstream reference site during intensive ADAF application events. NPnEO was measured at concentrations up to 1190microg/L in airport outfall samples, up to 77 ug/L in samples from the receiving stream and less than 5.0 microg/L from the upstream reference. Concentrations of glycol and other ADAF-related constituents, including NPnEO, were reduced by approximately 1 order of magnitude between the outfall sites and the receiving stream site; however, concentrations of NP in the receiving stream remained similar to those from the outfalls (< 0.04 microg/L at the upstream reference, 0.98 and 7.67 microg/L at outfalls, and 3.89 microg/L in the receiving stream). The field data suggest that NP is generated through degradation of NPnEO from airport runoff.

  12. Nonylphenol ethoxylates and other additives in aircraft deicers, antiicers, and waters receiving airport runoff.

    PubMed

    Corsi, Steven R; Zitomer, Daniel H; Field, Jennifer A; Cancilla, Devon A

    2003-09-15

    Samples of nine different formulations of aircraft deicer and antiicer fluids (ADAF) were screened for the presence of selected surfactants. Nonylphenol ethoxylates (NPnEO) were identified in three ADAF formulations, octylphenol ethoxylates were identified in two formulations, and six formulations contained alcohol ethoxylates. A preliminary field study was conducted at General Mitchell International Airport, Milwaukee, WI, to quantify NPnEO (n = 1-15) and one of its byproducts, nonylphenol (NP), in airport runoff. Samples were collected from two airport outfalls, from the receiving stream, and from an upstream reference site during intensive ADAF application events. NPnEO was measured at concentrations up to 1190microg/L in airport outfall samples, up to 77 ug/L in samples from the receiving stream and less than 5.0 microg/L from the upstream reference. Concentrations of glycol and other ADAF-related constituents, including NPnEO, were reduced by approximately 1 order of magnitude between the outfall sites and the receiving stream site; however, concentrations of NP in the receiving stream remained similar to those from the outfalls (< 0.04 microg/L at the upstream reference, 0.98 and 7.67 microg/L at outfalls, and 3.89 microg/L in the receiving stream). The field data suggest that NP is generated through degradation of NPnEO from airport runoff.

  13. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  14. 20 CFR 10.438 - Can OWCP require the individual who received the overpayment to submit additional financial...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the overpayment to submit additional financial information? 10.438 Section 10.438 Employees' Benefits... additional financial information? (a) The individual who received the overpayment is responsible for providing information about income, expenses and assets as specified by OWCP. This information is needed...

  15. 34 CFR 300.308 - Additional group members.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's...

  16. 34 CFR 300.308 - Additional group members.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's...

  17. 34 CFR 300.308 - Additional group members.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's...

  18. 34 CFR 300.308 - Additional group members.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's...

  19. 34 CFR 300.308 - Additional group members.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's...

  20. 40 CFR 35.4110 - What does EPA do once it receives the first LOI from a group?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false What does EPA do once it receives the... to Apply for A Tag § 35.4110 What does EPA do once it receives the first LOI from a group? The following table shows what EPA does when it receives the first LOI from a group: If your site . . . Then...

  1. 40 CFR 35.4110 - What does EPA do once it receives the first LOI from a group?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false What does EPA do once it receives the... to Apply for A Tag § 35.4110 What does EPA do once it receives the first LOI from a group? The following table shows what EPA does when it receives the first LOI from a group: If your site . . . Then...

  2. 40 CFR 35.4110 - What does EPA do once it receives the first LOI from a group?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false What does EPA do once it receives the... to Apply for A Tag § 35.4110 What does EPA do once it receives the first LOI from a group? The following table shows what EPA does when it receives the first LOI from a group: If your site . . . Then...

  3. Receiving Wear-Resistance Coverings Additives of Nanoparticles of Refractory Metals at a Laser Cladding

    NASA Astrophysics Data System (ADS)

    Murzakov, M. A.; Petrovskiy, V. N.; Bykovskiy, D. P.; Andreev, A. O.; Birukov, V. P.; Markushov, Y. V.

    2016-02-01

    Laser cladding technology was used to conduct experiments on production of wear-resistant coatings with additive nanoparticles of refractory metals (WC, TaC). Mechanical testing of coating abrasion was made using Brinell-Howarth method. The obtained data was compared with wear- resistance of commercial powder containing WC. It was found that at a concentration 10-15% coating with nanopowder additives shows a dramatic increase in wear-resistance by 4-6 times as compared to carbon steel substrate. There were conducted metallurgical studies of coatings on inverse electron reflection. There was determined elemental composition of deposited coating and substrate, and microhardness measured. It was found that structure of deposited coating with nanoparticles is fine.

  4. 42 CFR 412.107 - Special treatment: Hospitals that receive an additional update for FYs 1998 and 1999.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Inpatient Operating Costs § 412.107 Special treatment: Hospitals that receive an additional update for FYs... section if it meets all of the following criteria: (1) Definition. The hospital is not a Medicare...) of this section for their cost reporting periods beginning in FY 1995 is less than the...

  5. 20 CFR 408.808 - What happens to your SVB payments if you begin receiving additional benefit income?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false What happens to your SVB payments if you begin receiving additional benefit income? 408.808 Section 408.808 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Suspensions and Terminations Suspension §...

  6. 20 CFR 408.808 - What happens to your SVB payments if you begin receiving additional benefit income?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false What happens to your SVB payments if you begin receiving additional benefit income? 408.808 Section 408.808 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Suspensions and Terminations Suspension §...

  7. 20 CFR 408.808 - What happens to your SVB payments if you begin receiving additional benefit income?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false What happens to your SVB payments if you begin receiving additional benefit income? 408.808 Section 408.808 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Suspensions and Terminations Suspension §...

  8. 20 CFR 408.808 - What happens to your SVB payments if you begin receiving additional benefit income?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false What happens to your SVB payments if you begin receiving additional benefit income? 408.808 Section 408.808 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Suspensions and Terminations Suspension §...

  9. 20 CFR 408.808 - What happens to your SVB payments if you begin receiving additional benefit income?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false What happens to your SVB payments if you begin receiving additional benefit income? 408.808 Section 408.808 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Suspensions and Terminations Suspension §...

  10. Experiencing maternity care: the care received and perceptions of women from different ethnic groups

    PubMed Central

    2013-01-01

    Background According to the Office for National Statistics, approximately a quarter of women giving birth in England and Wales are from minority ethnic groups. Previous work has indicated that these women have poorer pregnancy outcomes than White women and poorer experience of maternity care, sometimes encountering stereotyping and racism. The aims of this study were to examine service use and perceptions of care in ethnic minority women from different groups compared to White women. Methods Secondary analysis of data from a survey of women in 2010 was undertaken. The questionnaire asked about women’s experience of care during pregnancy, labour and birth, and the postnatal period, as well as demographic factors. Ethnicity was grouped into eight categories: White, Mixed, Indian, Pakistani, Bangladeshi, Black Caribbean, Black African, and Other ethnicity. Results A total of 24,319 women completed the survey. Compared to White women, women from minority ethnic groups were more likely to be younger, multiparous and without a partner. They tended to access antenatal care later in pregnancy, have fewer antenatal checks, fewer ultrasound scans and less screening. They were less likely to receive pain relief in labour and, Black African women in particular, were more likely to deliver by emergency caesarean section. Postnatally, women from minority ethnic groups had longer lengths of hospital stay and were more likely to breastfeed but they had fewer home visits from midwives. Throughout their maternity care, women from minority ethnic groups were less likely to feel spoken to so they could understand, to be treated with kindness, to be sufficiently involved in decisions and to have confidence and trust in the staff. Conclusion Women in all minority ethnic groups had a poorer experience of maternity services than White women. That this was still the case following publication of a number of national policy documents and local initiatives is a cause for concern. PMID

  11. Localization of sperm whales in a group using clicks received at two separated short baseline arrays.

    PubMed

    Hirotsu, Ryo; Yanagisawa, Masao; Ura, Tamaki; Sakata, Masao; Sugimatsu, Harumi; Kojima, Junichi; Bahl, Rajendar

    2010-01-01

    In this paper, a sperm whale click analysis scheme is proposed in order to calculate the position of individual sperm whales in a group using data received at two arrays deployed near the surface. The proposed method mainly consists of two parts: short baseline (SBL) with classification and long baseline (LBL) with class matching. In SBL with classification, a click is automatically detected, and its direction of arrival is calculated. The clicks are then classified based on their direction vectors. The class data are then sent together with direction data and matched to the other array's class data. LBL with class matching is used for localization. The classification algorithm can be used to estimate the number of whales clicking and to list potential candidates for LBL matching. As a result, the proposed method is able to localize the positions of the whales in a group. The performance of the proposed method is evaluated using data recorded off Ogasawara islands with two arrays near the surface. The three-dimensional underwater trajectories of six sperm whales are extracted to demonstrate the capability of the proposed method.

  12. 26 CFR 1.1081-7 - Sale of stock or securities received upon exchange by members of system group.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 11 2011-04-01 2011-04-01 false Sale of stock or securities received upon exchange by members of system group. 1.1081-7 Section 1.1081-7 Internal Revenue INTERNAL REVENUE SERVICE... to S.e.c. Orders § 1.1081-7 Sale of stock or securities received upon exchange by members of...

  13. 26 CFR 1.1081-7 - Sale of stock or securities received upon exchange by members of system group.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 11 2013-04-01 2013-04-01 false Sale of stock or securities received upon exchange by members of system group. 1.1081-7 Section 1.1081-7 Internal Revenue INTERNAL REVENUE SERVICE... to S.e.c. Orders § 1.1081-7 Sale of stock or securities received upon exchange by members of...

  14. 26 CFR 1.1081-7 - Sale of stock or securities received upon exchange by members of system group.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 11 2012-04-01 2012-04-01 false Sale of stock or securities received upon exchange by members of system group. 1.1081-7 Section 1.1081-7 Internal Revenue INTERNAL REVENUE SERVICE... to S.e.c. Orders § 1.1081-7 Sale of stock or securities received upon exchange by members of...

  15. 26 CFR 1.1081-7 - Sale of stock or securities received upon exchange by members of system group.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 11 2014-04-01 2014-04-01 false Sale of stock or securities received upon exchange by members of system group. 1.1081-7 Section 1.1081-7 Internal Revenue INTERNAL REVENUE SERVICE... to S.e.c. Orders § 1.1081-7 Sale of stock or securities received upon exchange by members of...

  16. The Additive Impact of Group and Individual Publicly Displayed Feedback: Examining Individual Response Patterns and Response Generalization in a Safe-Driving Occupational Intervention

    ERIC Educational Resources Information Center

    Ludwig, Timothy D.; Geller, E. Scott; Clarke, Steven W.

    2010-01-01

    Additive effects of publicly posting individual feedback following group goal-setting and feedback were evaluated. The turn-signal use of pizza deliverers was studied in a multiple baseline design across two pizza stores. After baseline observations, pizza deliverers voted on a group turn-signal goal and then received 4 weeks of group feedback on…

  17. Additivity of Feature-Based and Symmetry-Based Grouping Effects in Multiple Object Tracking

    PubMed Central

    Wang, Chundi; Zhang, Xuemin; Li, Yongna; Lyu, Chuang

    2016-01-01

    Multiple object tracking (MOT) is an attentional process wherein people track several moving targets among several distractors. Symmetry, an important indicator of regularity, is a general spatial pattern observed in natural and artificial scenes. According to the “laws of perceptual organization” proposed by Gestalt psychologists, regularity is a principle of perceptual grouping, such as similarity and closure. A great deal of research reported that feature-based similarity grouping (e.g., grouping based on color, size, or shape) among targets in MOT tasks can improve tracking performance. However, no additive feature-based grouping effects have been reported where the tracking objects had two or more features. “Additive effect” refers to a greater grouping effect produced by grouping based on multiple cues instead of one cue. Can spatial symmetry produce a similar grouping effect similar to that of feature similarity in MOT tasks? Are the grouping effects based on symmetry and feature similarity additive? This study includes four experiments to address these questions. The results of Experiments 1 and 2 demonstrated the automatic symmetry-based grouping effects. More importantly, an additive grouping effect of symmetry and feature similarity was observed in Experiments 3 and 4. Our findings indicate that symmetry can produce an enhanced grouping effect in MOT and facilitate the grouping effect based on color or shape similarity. The “where” and “what” pathways might have played an important role in the additive grouping effect. PMID:27199875

  18. Additivity of Feature-Based and Symmetry-Based Grouping Effects in Multiple Object Tracking.

    PubMed

    Wang, Chundi; Zhang, Xuemin; Li, Yongna; Lyu, Chuang

    2016-01-01

    Multiple object tracking (MOT) is an attentional process wherein people track several moving targets among several distractors. Symmetry, an important indicator of regularity, is a general spatial pattern observed in natural and artificial scenes. According to the "laws of perceptual organization" proposed by Gestalt psychologists, regularity is a principle of perceptual grouping, such as similarity and closure. A great deal of research reported that feature-based similarity grouping (e.g., grouping based on color, size, or shape) among targets in MOT tasks can improve tracking performance. However, no additive feature-based grouping effects have been reported where the tracking objects had two or more features. "Additive effect" refers to a greater grouping effect produced by grouping based on multiple cues instead of one cue. Can spatial symmetry produce a similar grouping effect similar to that of feature similarity in MOT tasks? Are the grouping effects based on symmetry and feature similarity additive? This study includes four experiments to address these questions. The results of Experiments 1 and 2 demonstrated the automatic symmetry-based grouping effects. More importantly, an additive grouping effect of symmetry and feature similarity was observed in Experiments 3 and 4. Our findings indicate that symmetry can produce an enhanced grouping effect in MOT and facilitate the grouping effect based on color or shape similarity. The "where" and "what" pathways might have played an important role in the additive grouping effect.

  19. Alkenes as Chelating Groups in Diastereoselective Additions of Organometallics to Ketones

    PubMed Central

    2015-01-01

    Alkenes have been discovered to be chelating groups to Zn(II), enforcing highly stereoselective additions of organozincs to β,γ-unsaturated ketones. 1H NMR studies and DFT calculations provide support for this surprising chelation mode. The results expand the range of coordinating groups for chelation-controlled carbonyl additions from heteroatom Lewis bases to simple C–C double bonds, broadening the 60 year old paradigm. PMID:25328269

  20. Science program for an imaging radar receiving station in Alaska. Report of the science working group

    NASA Technical Reports Server (NTRS)

    1983-01-01

    It is argued that there would be broad scientific benefit in establishing in Alaska an imaging radar receiving station that would collect data from the European Space Agency's Remote Sensing Satellite, ERS-1. This station would acquire imagery of the ice cover from the American territorial waters of the Beaufort, Chukchi, and Bering Seas. This station, in conjunction with similar stations proposed for Kiruna, Sweden, and Prince Albert, Canada would provide synoptic coverage of nearly the entire Arctic. The value of such coverage to aspects of oceanography, geology, glaciology, and botany is considered.

  1. Preliminary evaluation of the Knox Group in Tennessee for receiving injected wastes

    USGS Publications Warehouse

    Bradley, M.W.

    1986-01-01

    The EPA is authorized under the Safe Drinking Water Act to protect underground sources of drinking water from contamination. However, an aquifer may be exempted from protection and used for injected wastes where the aquifer meets criteria established in the EPA 's Underground Injection Control program. The Knox Group in Middle and West Tennessee occurs primarily in the subsurface, and the top of the Knox Group ranges from about 350 to 3,000 feet below land surface. The upper part of the Knox Group (upper Knox aquifer) is an important source of drinking water in parts of the Central Basin and the Highland Rim provinces. The lower part of the Knox Group is currently being used for injected wastes at New Johnsonville on the western Highland Rim and at Mount Pleasant in the Central Basin. There is no known contamination of the upper Knox aquifer but contamination of the lower part of the Know Group is known at three waste injection well sites. (Lantz-PTT)

  2. Kinesio Taping Does Not Provide Additional Benefits in Patients With Chronic Low Back Pain Who Receive Exercise and Manual Therapy: A Randomized Controlled Trial.

    PubMed

    Added, Marco Aurélio Nemitalla; Costa, Leonardo Oliveira Pena; de Freitas, Diego Galace; Fukuda, Thiago Yukio; Monteiro, Renan Lima; Salomão, Evelyn Cassia; de Medeiros, Flávia Cordeiro; Costa, Lucíola da Cunha Menezes

    2016-07-01

    Study Design Randomized controlled trial. Background Many clinical practice guidelines endorse both manual therapy and exercise as effective treatment options for patients with low back pain. To optimize the effects of the treatments recommended by the guidelines, a new intervention known as Kinesio Taping is being widely used in these patients. Objectives To determine the effectiveness of Kinesio Taping in patients with chronic nonspecific low back pain when added to a physical therapy program consisting of exercise and manual therapy. Methods One hundred forty-eight patients with chronic nonspecific low back pain were randomly allocated to receive 10 (twice weekly) sessions of physical therapy, consisting of exercise and manual therapy, or the same treatment with the addition of Kinesio Taping applied to the lower back. The primary outcomes were pain intensity and disability (5 weeks after randomization) and the secondary outcomes were pain intensity, disability (3 months and 6 months after randomization), global perceived effect, and satisfaction with care (5 weeks after treatment). Data were collected by a blinded assessor. Results No between-group differences were observed in the primary outcomes of pain intensity (mean difference, -0.01 points; 95% confidence interval [CI]: -0.88, 0.85) or disability (mean difference, 1.14 points; 95% CI: -0.85, 3.13) at 5 weeks' follow-up. In addition, no between-group differences were observed for any of the other outcomes evaluated, except for disability 6 months after randomization (mean difference, 2.01 points; 95% CI: 0.03, 4.00) in favor of the control group. Conclusion Patients who received a physical therapy program consisting of exercise and manual therapy did not get additional benefit from the use of Kinesio Taping. Level of Evidence Therapy, level 1b. Prospectively registered May 28, 2013 at www.ClinicalTrials.gov (NCT01866332). J Orthop Sports Phys Ther 2016;46(7):506-513. Epub 6 Jun 2016. doi:10.2519/jospt.2016.6590.

  3. Kinesio Taping Does Not Provide Additional Benefits in Patients With Chronic Low Back Pain Who Receive Exercise and Manual Therapy: A Randomized Controlled Trial.

    PubMed

    Added, Marco Aurélio Nemitalla; Costa, Leonardo Oliveira Pena; de Freitas, Diego Galace; Fukuda, Thiago Yukio; Monteiro, Renan Lima; Salomão, Evelyn Cassia; de Medeiros, Flávia Cordeiro; Costa, Lucíola da Cunha Menezes

    2016-07-01

    Study Design Randomized controlled trial. Background Many clinical practice guidelines endorse both manual therapy and exercise as effective treatment options for patients with low back pain. To optimize the effects of the treatments recommended by the guidelines, a new intervention known as Kinesio Taping is being widely used in these patients. Objectives To determine the effectiveness of Kinesio Taping in patients with chronic nonspecific low back pain when added to a physical therapy program consisting of exercise and manual therapy. Methods One hundred forty-eight patients with chronic nonspecific low back pain were randomly allocated to receive 10 (twice weekly) sessions of physical therapy, consisting of exercise and manual therapy, or the same treatment with the addition of Kinesio Taping applied to the lower back. The primary outcomes were pain intensity and disability (5 weeks after randomization) and the secondary outcomes were pain intensity, disability (3 months and 6 months after randomization), global perceived effect, and satisfaction with care (5 weeks after treatment). Data were collected by a blinded assessor. Results No between-group differences were observed in the primary outcomes of pain intensity (mean difference, -0.01 points; 95% confidence interval [CI]: -0.88, 0.85) or disability (mean difference, 1.14 points; 95% CI: -0.85, 3.13) at 5 weeks' follow-up. In addition, no between-group differences were observed for any of the other outcomes evaluated, except for disability 6 months after randomization (mean difference, 2.01 points; 95% CI: 0.03, 4.00) in favor of the control group. Conclusion Patients who received a physical therapy program consisting of exercise and manual therapy did not get additional benefit from the use of Kinesio Taping. Level of Evidence Therapy, level 1b. Prospectively registered May 28, 2013 at www.ClinicalTrials.gov (NCT01866332). J Orthop Sports Phys Ther 2016;46(7):506-513. Epub 6 Jun 2016. doi:10.2519/jospt.2016

  4. Receiving the Initial Down Syndrome Diagnosis: A Comparison of Prenatal and Postnatal Parent Group Experiences

    ERIC Educational Resources Information Center

    Nelson Goff, Briana S.; Springer, Nicole; Foote, Laura Cline; Frantz, Courtney; Peak, Madison; Tracy, Courtney; Veh, Taylor; Bentley, Gail E.; Cross, Kayli A.

    2013-01-01

    This study explored the preliminary experiences of parents upon learning of their child's diagnosis of Down syndrome. Qualitative data from a web-based, national survey were analyzed based on two groups: prenatal ("n" = 46) or postnatal ("n" = 115) diagnosis. Three primary categories emerged from the data analysis:…

  5. Testing for Additivity at Select Mixture Groups of Interest Based on Statistical Equivalence Testing Methods

    SciTech Connect

    Stork, LeAnna M.; Gennings, Chris; Carchman, Richard; Carter, Jr., Walter H.; Pounds, Joel G.; Mumtaz, Moiz

    2006-12-01

    Several assumptions, defined and undefined, are used in the toxicity assessment of chemical mixtures. In scientific practice mixture components in the low-dose region, particularly subthreshold doses, are often assumed to behave additively (i.e., zero interaction) based on heuristic arguments. This assumption has important implications in the practice of risk assessment, but has not been experimentally tested. We have developed methodology to test for additivity in the sense of Berenbaum (Advances in Cancer Research, 1981), based on the statistical equivalence testing literature where the null hypothesis of interaction is rejected for the alternative hypothesis of additivity when data support the claim. The implication of this approach is that conclusions of additivity are made with a false positive rate controlled by the experimenter. The claim of additivity is based on prespecified additivity margins, which are chosen using expert biological judgment such that small deviations from additivity, which are not considered to be biologically important, are not statistically significant. This approach is in contrast to the usual hypothesis-testing framework that assumes additivity in the null hypothesis and rejects when there is significant evidence of interaction. In this scenario, failure to reject may be due to lack of statistical power making the claim of additivity problematic. The proposed method is illustrated in a mixture of five organophosphorus pesticides that were experimentally evaluated alone and at relevant mixing ratios. Motor activity was assessed in adult male rats following acute exposure. Four low-dose mixture groups were evaluated. Evidence of additivity is found in three of the four low-dose mixture groups.The proposed method tests for additivity of the whole mixture and does not take into account subset interactions (e.g., synergistic, antagonistic) that may have occurred and cancelled each other out.

  6. Needs and preferences for receiving mental health information in an African American focus group sample.

    PubMed

    Mishra, Shiraz I; Lucksted, Alicia; Gioia, Deborah; Barnet, Beth; Baquet, Claudia R

    2009-04-01

    The purpose of this study is to better understand the mental health/illness information and service delivery preferences among African American residents of Baltimore. We conducted four focus groups (n = 42) among African American adults currently unconnected with the mental health system. Participants expressed fear of stigma and perceptions of racism as major barriers to seeking information and/or services and discussed some normalizing strategies to address these barriers. African Americans harbor cultural and traditional beliefs regarding mental illness which could also act as barriers. Findings have implications for imparting acceptable and culturally sensitive mental health education and service delivery programs in community settings.

  7. Needs and Preferences for Receiving Mental Health Information in an African American Focus Group Sample

    PubMed Central

    Mishra, Shiraz I.; Lucksted, Alicia; Gioia, Deborah; Barnet, Beth; Baquet, Claudia R.

    2013-01-01

    The purpose of this study is to better understand the mental health/illness information and service delivery preferences among African American residents of Baltimore. We conducted four focus groups (n=42) among African American adults currently unconnected with the mental health system. Participants expressed fear of stigma and perceptions of racism as major barriers to seeking information and/or services and discussed some normalizing strategies to address these barriers. African Americans harbor cultural and traditional beliefs regarding mental illness which could also act as barriers. Findings have implications for imparting acceptable and culturally-sensitive mental health education and service delivery programs in community settings. PMID:18633704

  8. Addition of lysophospholipids with large head groups to cells inhibits Shiga toxin binding.

    PubMed

    Ailte, Ieva; Lingelem, Anne Berit Dyve; Kavaliauskiene, Simona; Bergan, Jonas; Kvalvaag, Audun Sverre; Myrann, Anne-Grethe; Skotland, Tore; Sandvig, Kirsten

    2016-01-01

    Shiga toxin (Stx), an AB5 toxin, binds specifically to the neutral glycosphingolipid Gb3 at the cell surface before being transported into cells. We here demonstrate that addition of conical lysophospholipids (LPLs) with large head groups inhibit Stx binding to cells whereas LPLs with small head groups do not. Lysophosphatidylinositol (LPI 18:0), the most efficient LPL with the largest head group, was selected for in-depth investigations to study how the binding of Stx is regulated. We show that the inhibition of Stx binding by LPI is reversible and possibly regulated by cholesterol since addition of methyl-β-cyclodextrin (mβCD) reversed the ability of LPI to inhibit binding. LPI-induced inhibition of Stx binding is independent of signalling and membrane turnover as it occurs in fixed cells as well as after depletion of cellular ATP. Furthermore, data obtained with fluorescent membrane dyes suggest that LPI treatment has a direct effect on plasma membrane lipid packing with shift towards a liquid disordered phase in the outer leaflet, while lysophosphoethanolamine (LPE), which has a small head group, does not. In conclusion, our data show that cellular treatment with conical LPLs with large head groups changes intrinsic properties of the plasma membrane and modulates Stx binding to Gb3. PMID:27458147

  9. Addition of lysophospholipids with large head groups to cells inhibits Shiga toxin binding

    PubMed Central

    Ailte, Ieva; Lingelem, Anne Berit Dyve; Kavaliauskiene, Simona; Bergan, Jonas; Kvalvaag, Audun Sverre; Myrann, Anne-Grethe; Skotland, Tore; Sandvig, Kirsten

    2016-01-01

    Shiga toxin (Stx), an AB5 toxin, binds specifically to the neutral glycosphingolipid Gb3 at the cell surface before being transported into cells. We here demonstrate that addition of conical lysophospholipids (LPLs) with large head groups inhibit Stx binding to cells whereas LPLs with small head groups do not. Lysophosphatidylinositol (LPI 18:0), the most efficient LPL with the largest head group, was selected for in-depth investigations to study how the binding of Stx is regulated. We show that the inhibition of Stx binding by LPI is reversible and possibly regulated by cholesterol since addition of methyl-β-cyclodextrin (mβCD) reversed the ability of LPI to inhibit binding. LPI-induced inhibition of Stx binding is independent of signalling and membrane turnover as it occurs in fixed cells as well as after depletion of cellular ATP. Furthermore, data obtained with fluorescent membrane dyes suggest that LPI treatment has a direct effect on plasma membrane lipid packing with shift towards a liquid disordered phase in the outer leaflet, while lysophosphoethanolamine (LPE), which has a small head group, does not. In conclusion, our data show that cellular treatment with conical LPLs with large head groups changes intrinsic properties of the plasma membrane and modulates Stx binding to Gb3. PMID:27458147

  10. Structure of the Crust beneath Cameroon, West Africa, from the Joint Inversion of Rayleigh Wave Group Velocities and Receiver Functions

    SciTech Connect

    Tokam, A K; Tabod, C T; Nyblade, A A; Julia, J; Wiens, D A; Pasyanos, M E

    2010-02-18

    Cameroon using 1-D shear wave velocity models obtained from the joint inversion of Rayleigh wave group velocities and P-receiver functions for 32 broadband seismic stations. From the 1-D shear wave velocity models, we obtain new insights into the composition and structure of the crust and upper mantle across Cameroon. After briefly reviewing the geological framework of Cameroon, we describe the data and the joint inversion method, and then interpret variations in crustal structure found beneath Cameroon in terms of the tectonic history of the region.

  11. Catalytic enantioselective 1,6-conjugate additions of propargyl and allyl groups

    NASA Astrophysics Data System (ADS)

    Meng, Fanke; Li, Xiben; Torker, Sebastian; Shi, Ying; Shen, Xiao; Hoveyda, Amir H.

    2016-09-01

    Conjugate (or 1,4-) additions of carbanionic species to α,β-unsaturated carbonyl compounds are vital to research in organic and medicinal chemistry, and there are several chiral catalysts that facilitate the catalytic enantioselective additions of nucleophiles to enoates. Nonetheless, catalytic enantioselective 1,6-conjugate additions are uncommon, and ones that incorporate readily functionalizable moieties, such as propargyl or allyl groups, into acyclic α,β,γ,δ-doubly unsaturated acceptors are unknown. Chemical transformations that could generate a new bond at the C6 position of a dienoate are particularly desirable because the resulting products could then be subjected to further modifications. However, such reactions, especially when dienoates contain two equally substituted olefins, are scarce and are confined to reactions promoted by a phosphine-copper catalyst (with an alkyl Grignard reagent, dialkylzinc or trialkylaluminium compounds), a diene-iridium catalyst (with arylboroxines), or a bisphosphine-cobalt catalyst (with monosilyl-acetylenes). 1,6-Conjugate additions are otherwise limited to substrates where there is full substitution at the C4 position. It is unclear why certain catalysts favour bond formation at C6, and—although there are a small number of catalytic enantioselective conjugate allyl additions—related 1,6-additions and processes involving a propargyl unit are non-existent. Here we show that an easily accessible organocopper catalyst can promote 1,6-conjugate additions of propargyl and 2-boryl-substituted allyl groups to acyclic dienoates with high selectivity. A commercially available allenyl-boron compound or a monosubstituted allene may be used. Products can be obtained in up to 83 per cent yield, >98:2 diastereomeric ratio (for allyl additions) and 99:1 enantiomeric ratio. We elucidate the mechanistic details, including the origins of high site selectivity (1,6- versus 1,4-) and enantioselectivity as a function of the catalyst

  12. Side Group Addition to the PAH Coronene by UV Photolysis in Cosmic Ice Analogs

    NASA Technical Reports Server (NTRS)

    Bernstein, Max P.; Elsila, Jamie E.; Dworkin, Jason P.; Sandford, Scott A.; Allamandola, Louis J.; Zare, Richard N.; DeVincenzi, D. (Technical Monitor)

    2002-01-01

    Ultraviolet photolysis of various ice mixtures at low temperature and pressure caused the addition of amino (-NH2), methyl (-CH3), methoxy (-OCH3), and cyano (-CN) functional groups to the polycyclic aromatic hydrocarbon (PAH) coronene (C22H12). The implications of these results for interstellar and meteoritic chemistry are discussed. Previously only simple PAH photo-oxidation had been reported. This work represents the first experimental evidence that ice photochemistry may have contributed to aromatics bearing carbon and nitrogen containing side groups that are detected in primitive meteorites and interplanetary dust particles. Furthermore, these results suggest a wider range of modified PAHs should be expected in interstellar lees and materials predating solar system formation.

  13. ProPhenol-Catalyzed Asymmetric Additions by Spontaneously Assembled Dinuclear Main Group Metal Complexes

    PubMed Central

    2016-01-01

    Conspectus The development of catalytic enantioselective transformations has been the focus of many research groups over the past half century and is of paramount importance to the pharmaceutical and agrochemical industries. Since the award of the Nobel Prize in 2001, the field of enantioselective transition metal catalysis has soared to new heights, with the development of more efficient catalysts and new catalytic transformations at increasing frequency. Furthermore, catalytic reactions that allow higher levels of redox- and step-economy are being developed. Thus, alternatives to asymmetric alkene dihydroxylation and the enantioselective reduction of α,β-unsaturated ketones can invoke more strategic C–C bond forming reactions, such as asymmetric aldol reactions of an aldehyde with α-hydroxyketone donors or enantioselective alkynylation of an aldehyde, respectively. To facilitate catalytic enantioselective addition reactions, including the aforementioned aldol and alkynylation reactions, our lab has developed the ProPhenol ligand. In this Account, we describe the development and application of the ProPhenol ligand for asymmetric additions of both carbon- and heteroatom-based nucleophiles to various electrophiles. The ProPhenol ligand spontaneously forms chiral dinuclear metal complexes when treated with an alkyl metal reagent, such as Et2Zn or Bu2Mg. The resulting complex contains both a Lewis acidic site to activate an electrophile and a Brønsted basic site to deprotonate a pronucleophile. Initially, our research focused on the use of Zn-ProPhenol complexes to facilitate the direct aldol reaction. Fine tuning of the reaction through ligand modification and the use of additives enabled the direct aldol reaction to proceed in high yields and stereoselectivities with a broad range of donor substrates, including acetophenones, methyl ynones, methyl vinyl ketone, acetone, α-hydroxy carbonyl compounds, and glycine Schiff bases. Additionally, an analogous

  14. Counterintuitive mechanisms of the addition of hydrogen and simple olefins to heavy group 13 alkene analogues.

    PubMed

    Caputo, Christine A; Koivistoinen, Juha; Moilanen, Jani; Boynton, Jessica N; Tuononen, Heikki M; Power, Philip P

    2013-02-01

    The mechanism of the reaction of olefins and hydrogen with dimetallenes ArMMAr (Ar = aromatic group; M = Al or Ga) was studied by density functional theory calculations and experimental methods. The digallenes, for which the most experimental data are available, are extensively dissociated to gallanediyl monomers, :GaAr, in hydrocarbon solution, but the calculations and experimental data showed also that they react with simple olefins, such as ethylene, as intact ArGaGaAr dimers via stepwise [2 + 2 + 2] cycloadditions due to their considerably lower activation barriers vis-à-vis the gallanediyl monomers, :GaAr. This pathway was preferred over the [2 + 2] cycloaddition of olefin to monomeric :GaAr to form a gallacyclopropane ring with subsequent dimerization to yield the 1,2-digallacyclobutane intermediate and, subsequently, the 1,4-digallacyclohexane product. The calculations showed also that the addition of H(2) to digallene proceeds by a different mechanism involving the initial addition of one equivalent of H(2) to form a 1,2-dihydride intermediate. This reacts with a second equivalent of H(2) to give two ArGaH(2) fragments which recombine to give the observed product with terminal and bridging H-atoms, Ar(H)Ga(μ-H)(2)Ga(H)Ar. The computations agree with the experimental observation that the :GaAr(iPr(8)) (Ar(iPr(8)) = C(6)H-2,6-(C(6)H(3)-2,4,6-(i)Pr(3))(2)-3,5-(i)Pr(2)), which does not associate even in the solid state, does not react with ethylene or hydrogen. Calculations on the reaction of propene with ArAlAlAr show that, in contrast to the digallenes, addition involves an open-shell transition state consistent with the higher singlet diradical character of dialuminenes.

  15. Does Hormone Therapy Reduce Disease Recurrence in Prostate Cancer Patients Receiving Dose-Escalated Radiation Therapy? An Analysis of Radiation Therapy Oncology Group 94-06

    SciTech Connect

    Valicenti, Richard K.; Bae, Kwounghwa; Michalski, Jeff; Sandler, Howard; Shipley, William; Lin, Alex; Cox, James

    2011-04-01

    Purpose: The purpose of this study was to evaluate the effect on freedom from biochemical failure (bNED) or disease-free survival (DFS) by adding hormone therapy (HT) to dose-escalated radiation therapy (HDRT). Methods and Materials: We used 883 analyzable prostate cancer patients who enrolled on Radiation Therapy Oncology Group (RTOG) 94-06, a Phase I/II dose escalation trial, and whose mean planning target volume dose exceeded 73.8 Gy (mean, 78.5 Gy; maximum, 84.3 Gy). We defined biochemical failure according to the Phoenix definition. Results: A total of 259 men started HT 2 to 3 months before HDRT, but not longer than 6 months, and 66 men with high-risk prostate cancer received HT for a longer duration. At 5 years, the biochemical failure rates after HDRT alone were 12%, 18%, and 29% for low-, intermediate-, and high-risk patients, respectively (p < 0.0001). Cox proportional hazards regression analysis adjusted for covariates revealed that pretreatment PSA level was a significant factor, whereas risk group, Gleason score, T-stage, and age were not. When the patients were stratified by risk groups, the Cox proportion hazards regression model (after adjusting for pretreatment PSA, biopsy Gleason score, and T stage) did not reveal a significant effect on bNED or DFS by adding HT to HDRT Conclusion: The addition of HT did not significantly improve bNED survival or DFS in all prostate cancer patients receiving HDRT, but did approach significance in high-risk patient subgroup. The result of this study is hypothesis generating and requires testing in a prospective randomized trial.

  16. Polymers bearing groups derived from n-substituted lactams and their use as lubricating oil additives

    SciTech Connect

    Brulet, D.; Chauvel, B.; Pocheville, R.

    1980-09-16

    Novel lubricating oil polymer additives are obtained by the following: (1) by preparing, by anionic polymerization, a living diene polymer of mn of between about 20,000 and 300,000; (2) by functionalizing the said polymer by means of an nsubstituted lactam of the type of n-alkylcaprolactam, nbinylcaprolactam, and particularly of the type of nalkylpyrrolidione and n-vinylpyrrolidone; and (3) by hydrogenating the said functionalized polymer. A variant method of preparing the said polymers comprises subjecting the living polymer to a metalation operation before functionalization; the hydrogenation operation is carried out before metalation or after functionalization. The said polymers may be used as additives which improve the viscosity index and the dispersing power of lubricating oils. The amount of additive added is between about 0.1 and 10 percent by weight.

  17. Additional Validity Evidence and Across-Group Equivalency of the "HOPE Teacher Rating Scale"

    ERIC Educational Resources Information Center

    Peters, Scott J.; Gentry, Marcia

    2013-01-01

    The "HOPE Scale" was developed to identify academic and social components of giftedness and talent in elementary-aged students with particular attention to students from low-income and/or culturally diverse families. Based on previous findings, additional research was conducted on revisions made to the "HOPE Scale". Items were added, and 71…

  18. Multi-Walled Carbon Nanotube Functionalization by Radical Addition Using Hydroxymethylene Groups.

    PubMed

    Rodríguez-Jiménez, Rubén; Alonso-Núñez, Gabriel; Paraguay-Delgado, Francisco; Espinoza-Gómez, Heriberto; Vélez-López, Ernesto; Rogel-Hernández, Eduardo

    2016-01-01

    Synthetic methodology and characterization of multi-walled carbon nanotubes (MWCNTs) function- alized with hydroxymethylene groups are reported. The MWCNTs were synthesized by the spray pyrolysis technique using toluene as carbon source and ferrocene as catalyst. Hydroxymethylation of MWCNTs was carried out by methanol using benzoyl peroxide (BPO) at different quantities (300 to 900 mg); the optimum BPO quantity was 300 mg. The resulting materials were characterized by FT-IR, Raman Spectroscopy, Thermal Gravimetric Analysis (TGA) and Transmission Electron Microscopy (TEM). The presence of the hydroxymethylene group on the MWCNTs surface was demonstrated by FT-IR, Raman Spectroscopy, TGA, EDS, TEM and Mass Spectrometry. The func- tionalized MWCNTs were not damaged by this methodology. PMID:27398563

  19. Three Additional Candidates for the Group of Very Wide Binary Asteroids

    NASA Astrophysics Data System (ADS)

    Warner, Brian D.

    2016-10-01

    The very wide binary asteroids (VWBA) are a subgroup of binary asteroids that exhibit very long primary periods and, mostly, short secondary periods that are similar to those of the primary of "normal" small binary asteroids. It is unlikely that confirming mutual events will be seen by photometric observations, mostly because the orbital periods of the assumed satellites will be on the order of days. This paper introduces three additional candidates for this subgroup: (215442) 2002 MQ3, 2009 EC, and 2016 BU13. All three are considered to be among the more convincing examples that such systems exist.

  20. Heat tolerant fungi and applied research: Addition to the previously treated group of strictly thermotolerant species.

    PubMed

    Mouchacca, Jean

    2007-12-01

    Heat tolerant fungi are organisms that may perform bioconversion processes and produce industrially important metabolites. They may either be obligate thermophiles or simple thermotolerants. The present document is the continuation of a critical note on thermotolerant fungi erroneously reported in the literature as possessing thermophilic attributes. Fifty strictly thermotolerant taxa are here considered. Some of their binomials have only recently been introduced in the scientific literature. The reported thermotolerant species are grouped according to broad taxonomic categories. The nomenclature of zygomycetous taxa and anamorphic fungi is straightforward, as usually only one binomial is available or only one state is produced in culture respectively. For Ascomycetes regularly producing in culture a conidial state, the name of the sexual state (teleomorph) should be used to designate the organism even when a binomial is available for the anamorph; this prevents the practice of interchangeably using the name of either states of the same fungus. When ascomycetous taxa produce the anamorph regularly and the teleomorph only under specific cultural conditions, the name of the anamorph could be preferentially selected. The goal is to introduce uniformity in name citations of fungi, particularly in the literature of applied research. Each species is reported under its taxonomically correct name, either the original binomial or the latest combined binomial after generic transfer(s). Known synonyms are also specified. Maximum efforts were undertaken to trace updated information on the taxonomic position of these fifty strict thermotolerant species. For each, information on the type material, morphological features distinguishing it from related members of the genus (and when necessary a generic taxonomic assessment) and, finally, salient ecological features including heat tolerance levels are given. For some information on their biotechnological use is also provided

  1. Additive opportunistic capture explains group hunting benefits in African wild dogs.

    PubMed

    Hubel, Tatjana Y; Myatt, Julia P; Jordan, Neil R; Dewhirst, Oliver P; McNutt, J Weldon; Wilson, Alan M

    2016-03-29

    African wild dogs (Lycaon pictus) are described as highly collaborative endurance pursuit hunters based on observations derived primarily from the grass plains of East Africa. However, the remaining population of this endangered species mainly occupies mixed woodland savannah where hunting strategies appear to differ from those previously described. We used high-resolution GPS and inertial technology to record fine-scale movement of all members of a single pack of six adult African wild dogs in northern Botswana. The dogs used multiple short-distance hunting attempts with a low individual kill rate (15.5%), but high group feeding rate due to the sharing of prey. Use of high-level cooperative chase strategies (coordination and collaboration) was not recorded. In the mixed woodland habitats typical of their current range, simultaneous, opportunistic, short-distance chasing by dogs pursuing multiple prey (rather than long collaborative pursuits of single prey by multiple individuals) could be the key to their relative success in these habitats.

  2. Additive opportunistic capture explains group hunting benefits in African wild dogs.

    PubMed

    Hubel, Tatjana Y; Myatt, Julia P; Jordan, Neil R; Dewhirst, Oliver P; McNutt, J Weldon; Wilson, Alan M

    2016-01-01

    African wild dogs (Lycaon pictus) are described as highly collaborative endurance pursuit hunters based on observations derived primarily from the grass plains of East Africa. However, the remaining population of this endangered species mainly occupies mixed woodland savannah where hunting strategies appear to differ from those previously described. We used high-resolution GPS and inertial technology to record fine-scale movement of all members of a single pack of six adult African wild dogs in northern Botswana. The dogs used multiple short-distance hunting attempts with a low individual kill rate (15.5%), but high group feeding rate due to the sharing of prey. Use of high-level cooperative chase strategies (coordination and collaboration) was not recorded. In the mixed woodland habitats typical of their current range, simultaneous, opportunistic, short-distance chasing by dogs pursuing multiple prey (rather than long collaborative pursuits of single prey by multiple individuals) could be the key to their relative success in these habitats. PMID:27023355

  3. Addition of ethylene or hydrogen to a main-group metal cluster under mild conditions.

    PubMed

    Vasko, Petra; Wang, Shuai; Tuononen, Heikki M; Power, Philip P

    2015-03-16

    Reaction of the tin cluster Sn8(Ar(Me6))4(Ar(Me6)=C6H2-2,6-(C6H3-2,4,6-Me3)2) with excess ethylene or dihydrogen at 25 °C/1 atmosphere yielded two new clusters that incorporated ethylene or hydrogen. The reaction with ethylene yielded Sn4(Ar(Me6))4(C2H2)5 that contained five ethylene moieties bridging four aryl substituted tin atoms and one tin-tin bond. Reaction with H2 produced a cyclic tin species of formula (Sn(H)Ar(Me6))4, which could also be synthesized by the reaction of {(Ar(Me6))Sn(μ-Cl)}2 with DIBAL-H. These reactions represent the first instances of direct reactions of isolable main-group clusters with ethylene or hydrogen under mild conditions. The products were characterized in the solid state by X-ray diffraction and IR spectroscopy and in solution by multinuclear NMR and UV/Vis spectroscopies. Density functional theory calculations were performed to explain the reactivity of the cluster.

  4. Additive opportunistic capture explains group hunting benefits in African wild dogs

    PubMed Central

    Hubel, Tatjana Y.; Myatt, Julia P.; Jordan, Neil R.; Dewhirst, Oliver P.; McNutt, J. Weldon; Wilson, Alan M.

    2016-01-01

    African wild dogs (Lycaon pictus) are described as highly collaborative endurance pursuit hunters based on observations derived primarily from the grass plains of East Africa. However, the remaining population of this endangered species mainly occupies mixed woodland savannah where hunting strategies appear to differ from those previously described. We used high-resolution GPS and inertial technology to record fine-scale movement of all members of a single pack of six adult African wild dogs in northern Botswana. The dogs used multiple short-distance hunting attempts with a low individual kill rate (15.5%), but high group feeding rate due to the sharing of prey. Use of high-level cooperative chase strategies (coordination and collaboration) was not recorded. In the mixed woodland habitats typical of their current range, simultaneous, opportunistic, short-distance chasing by dogs pursuing multiple prey (rather than long collaborative pursuits of single prey by multiple individuals) could be the key to their relative success in these habitats. PMID:27023355

  5. Anaerobic Activation of p-Cymene in Denitrifying Betaproteobacteria: Methyl Group Hydroxylation versus Addition to Fumarate

    PubMed Central

    Strijkstra, Annemieke; Trautwein, Kathleen; Jarling, René; Wöhlbrand, Lars; Dörries, Marvin; Reinhardt, Richard; Drozdowska, Marta; Golding, Bernard T.; Wilkes, Heinz

    2014-01-01

    The betaproteobacteria “Aromatoleum aromaticum” pCyN1 and “Thauera” sp. strain pCyN2 anaerobically degrade the plant-derived aromatic hydrocarbon p-cymene (4-isopropyltoluene) under nitrate-reducing conditions. Metabolite analysis of p-cymene-adapted “A. aromaticum” pCyN1 cells demonstrated the specific formation of 4-isopropylbenzyl alcohol and 4-isopropylbenzaldehyde, whereas with “Thauera” sp. pCyN2, exclusively 4-isopropylbenzylsuccinate and tentatively identified (4-isopropylphenyl)itaconate were observed. 4-Isopropylbenzoate in contrast was detected with both strains. Proteogenomic investigation of p-cymene- versus succinate-adapted cells of the two strains revealed distinct protein profiles agreeing with the different metabolites formed from p-cymene. “A. aromaticum” pCyN1 specifically produced (i) a putative p-cymene dehydrogenase (CmdABC) expected to hydroxylate the benzylic methyl group of p-cymene, (ii) two dehydrogenases putatively oxidizing 4-isopropylbenzyl alcohol (Iod) and 4-isopropylbenzaldehyde (Iad), and (iii) the putative 4-isopropylbenzoate-coenzyme A (CoA) ligase (Ibl). The p-cymene-specific protein profile of “Thauera” sp. pCyN2, on the other hand, encompassed proteins homologous to subunits of toluene-activating benzylsuccinate synthase (termed [4-isopropylbenzyl]succinate synthase IbsABCDEF; identified subunits, IbsAE) and protein homologs of the benzylsuccinate β-oxidation (Bbs) pathway (termed BisABCDEFGH; all identified except for BisEF). This study reveals that two related denitrifying bacteria employ fundamentally different peripheral degradation routes for one and the same substrate, p-cymene, with the two pathways apparently converging at the level of 4-isopropylbenzoyl-CoA. PMID:25261521

  6. Treatment uptake and outcomes among current and former injection drug users receiving directly observed therapy within a multidisciplinary group model for the treatment of hepatitis C virus infection.

    PubMed

    Grebely, Jason; Genoway, Krista; Khara, Milan; Duncan, Fiona; Viljoen, Mark; Elliott, Doug; Raffa, Jesse D; DeVlaming, Stanley; Conway, Brian

    2007-10-01

    Injection drug use accounts for the majority of incident and prevalent cases of hepatitis C virus (HCV) infection. However, very few injection drug users (IDUs) have received treatment for this condition given issues of medical or psychiatric co-morbidity, ongoing substance abuse and a widely held belief that such individuals will not be able to adhere to the requirements of therapy, including regular medical follow-up. With this in mind, we sought to evaluate HCV treatment uptake and outcomes among current and former IDUs attending a weekly peer support group and receiving directly observed HCV therapy. Utilizing the existing infrastructure for the management of addictive disease, we have developed a model of "one-stop shopping" whereby the treatment of addiction, HCV and other medical conditions are fully integrated, with the collaboration of nurses, counsellors, addiction specialists, infectious disease specialists, primary care physicians and researchers. Subjects interested in receiving treatment for HCV infection were referred to a weekly peer-support group and evaluated for treatment. Patients received therapy with pegylated interferon-alpha2a or -alpha2b, both in combination with ribavirin. All injections were directly observed. Overall, we observed a high uptake of HCV treatment among attendees, with 51 percent either receiving or about to receive therapy. To date, 18 patients have initiated treatment for HCV infection and 12 have completed therapy. Overall, 8/12 (67 percent) subjects achieved an end of treatment response (genotype 1, 67 percent; genotypes 2/3, 67 percent), despite ongoing drug use in 75 percent of patients during treatment. These data demonstrate that with the appropriate programs in place, a high uptake of HCV treatment can be achieved among IDUs referred to a peer-support group. Moreover, the treatment of HCV in current and former IDUs within a multidisciplinary DOT program can be successfully undertaken, resulting in ETRs similar to

  7. Synthesis of Heterocycles Through Classical Ugi and Passerini Reactions Followed by Secondary Transformations Involving One or Two Additional Functional Groups

    NASA Astrophysics Data System (ADS)

    Banfi, Luca; Basso, Andrea; Riva, Renata

    The combination of classical isocyanide-based multicomponent reactions (Ugi and Passerini) with a variety of post-condensation transformations, which take advantage of suitably positioned additional functional groups, allows the straightforward synthesis, often in 1-2 synthetic steps, of many diverse nitrogen-containing heterocycles. This review will cover all the applications of this strategy reported to date (September 2009).

  8. Enhancing First-Grade Students' Addition-Fact Fluency Using Classwide Cover, Copy, and Compare, a Sprint, and Group Rewards

    ERIC Educational Resources Information Center

    Poncy, Brian C.; Skinner, Christopher H.

    2011-01-01

    The authors used a multiple-probe, across-tasks design to evaluate the effects of a classwide, multicomponent intervention on first-grade students' addition-fact fluency. Intervention components included "cover, copy, and compare," a 2-min math sprint, and a weekly group reward. Results showed that classwide digits correct per minute averages…

  9. Evaluation of long-term community recovery from Hurricane Andrew: sources of assistance received by population sub-groups.

    PubMed

    McDonnell, S; Troiano, R P; Barker, N; Noji, E; Hlady, W G; Hopkins, R

    1995-12-01

    Two three-stage cluster surveys were conducted in South Dade County, Florida, 14 months apart, to assess recovery following Hurricane Andrew. Response rates were 75 per cent and 84 per cent. Sources of assistance used in recovery from Hurricane Andrew differed according to race, per capita income, ethnicity, and education. Reports of improved living situation post-hurricane were not associated with receiving relief assistance, but reports of a worse situation were associated with loss of income, being exploited, or job loss. The number of households reporting problems with crime and community violence doubled between the two surveys. Disaster relief efforts had less impact on subjective long-term recovery than did job or income loss or housing repair difficulties. Existing sources of assistance were used more often than specific post-hurricane relief resources. The demographic make-up of a community may determine which are the most effective means to inform them after a disaster and what sources of assistance may be useful.

  10. Carboxylic Acids as A Traceless Activation Group for Conjugate Additions: A Three-Step Synthesis of (±)-Pregabalin

    PubMed Central

    2015-01-01

    The direct application of carboxylic acids as a traceless activation group for radical Michael additions has been accomplished via visible light-mediated photoredox catalysis. Photon-induced oxidation of a broad series of carboxylic acids, including hydrocarbon-substituted, α-oxy, and α-amino acids, provides a versatile CO2-extrusion platform to generate Michael donors without the requirement for organometallic activation or propagation. A diverse array of Michael acceptors is amenable to this new conjugate addition strategy. An application of this technology to a three-step synthesis of the medicinal agent pregabalin (commercialized by Pfizer under the trade name Lyrica) is also presented. PMID:25032785

  11. Analysis of cytokine production and V beta T-cell receptor subsets in irradiated recipients receiving portal or peripheral venous reconstitution with allogeneic bone marrow cells, with or without additional anti-cytokine monoclonal antibodies.

    PubMed Central

    Gorczynski, R M; Chen, Z; Zeng, H; Gorczynski, L; Terzioglu, E

    1998-01-01

    Irradiated (800 rads) AKR mice received intravenous (i.v.) reconstitution with a mixture of B10.BR T-depleted bone marrow cells and spleen cells. Only in groups of mice treated additionally with i.v. cyclophosphamide (Cy; 150 mg/kg), 24 hr before transplantation, was long-term (> 60% at 50 days) survival seen. In mice receiving only irradiation all animals died by 30 days post-transplantation. Histological changes consistent with graft-versus-host disease (GVHD) were seen in the liver of reconstituted mice at 30 days, along with an organ-specific increase in V beta 3 T-cell receptor-positive (TCR+) cells. No such increase in V beta 3 TCR+ cells was seen in the spleen from the same mice. These data are consistent with a tissue antigen-driven expansion of V beta 3 TCR+ cells associated with GVHD in the liver in this model. When we analysed cytokine production in vitro from CD3+ cells restimulated with 'host' (AKR) antigen-presenting cells (APC), we found a transition in cytokine production from preferential synthesis of type-1 cytokines [interleukin-2 (IL-2) and interferon-gamma (IFN-gamma)] at early times (day 15) post-reconstitution to increased production of type-2 cytokines [IL-4, transforming growth factor-beta (TGF-beta) and IL-10] at later times (day 30) post-reconstitution in Cy-treated recipients. Animals not receiving Cy did not show this 'switch' in cytokine production at later time points. We have observed a similar polarization in cytokine production, along with increased graft survival, in recipients of vascularized and non-vascularized allografts after portal venous (p.v.), but not i.v., pretransplant donor-specific immunization. We next studied AKR mice receiving 800 rads and subsequently reconstituted with B10.BR stem cells via the p.v. route. Again these mice showed prolonged survival (> 50% at 50 days), with polarization to IL-4, IL-10 and TGF-beta on restimulation of CD3+ cells in vitro at 30 days post-transplant and increased V beta 3 TCR+ cells

  12. A quantum chemical study of the mechanisms of olefin addition to group 9 transition metal dioxo compounds.

    PubMed

    Ahmed, Issahaku; Tia, Richard; Adei, Evans

    2016-01-01

    triplet PES than on the singlet PES for the formation of similar analogues. There are fewer competitive reaction pathways on the triplet surface than on the singlet PES. Also, cycloadditions that seem impossible on the singlet PES seem possible on the doublet and or triplet PESs, this is the case typically for the Rh and Co complexes, illustrating the importance of multiple spin states in organometallic reactions.Graphical AbstractTable of Contents Synopsis: A study of the mechanism of ethylene addition to MO2(CH2)(CH3)(M=Co,Rh,Ir) shows the reactions of the Co complex have lower activation barriers for the preferred [3+2] and [2+2] addition pathways and fewer side reactions than those of Rh and Ir. Reactions are more feasible and selective on the triplet PES than on the singlet PES. These illustrate the importance of multiple spin states in organometallic reactions and shows catalyst activity and selectivity decreases down the group.

  13. Nutrient limitation in three lowland tropical forests in southern China receiving high nitrogen deposition: insights from fine root responses to nutrient additions.

    PubMed

    Zhu, Feifei; Yoh, Muneoki; Gilliam, Frank S; Lu, Xiankai; Mo, Jiangming

    2013-01-01

    Elevated nitrogen (N) deposition to tropical forests may accelerate ecosystem phosphorus (P) limitation. This study examined responses of fine root biomass, nutrient concentrations, and acid phosphatase activity (APA) of bulk soil to five years of N and P additions in one old-growth and two younger lowland tropical forests in southern China. The old-growth forest had higher N capital than the two younger forests from long-term N accumulation. From February 2007 to July 2012, four experimental treatments were established at the following levels: Control, N-addition (150 kg N ha(-1) yr(-1)), P-addition (150 kg P ha(-1) yr(-1)) and N+P-addition (150 kg N ha(-1) yr(-1) plus 150 kg P ha(-1) yr(-1)). We hypothesized that fine root growth in the N-rich old-growth forest would be limited by P availability, and in the two younger forests would primarily respond to N additions due to large plant N demand. Results showed that five years of N addition significantly decreased live fine root biomass only in the old-growth forest (by 31%), but significantly elevated dead fine root biomass in all the three forests (by 64% to 101%), causing decreased live fine root proportion in the old-growth and the pine forests. P addition significantly increased live fine root biomass in all three forests (by 20% to 76%). The combined N and P treatment significantly increased live fine root biomass in the two younger forests but not in the old-growth forest. These results suggest that fine root growth in all three study forests appeared to be P-limited. This was further confirmed by current status of fine root N:P ratios, APA in bulk soil, and their responses to N and P treatments. Moreover, N addition significantly increased APA only in the old-growth forest, consistent with the conclusion that the old-growth forest was more P-limited than the younger forests.

  14. The Use of Nominal Group Technique to Determine Additional Support Needs for a Group of Victorian TAFE Managers and Senior Educators

    ERIC Educational Resources Information Center

    Bailey, Anthony

    2013-01-01

    The nominal group technique (NGT) is a structured process to gather information from a group. The technique was first described in 1975 and has since become a widely-used standard to facilitate working groups. The NGT is effective for generating large numbers of creative new ideas and for group priority setting. This paper describes the process of…

  15. Establishment of cellulolytic bacteria and development of fermentative activities in the rumen of gnotobiotically-reared lambs receiving the microbial additive Saccharomyces cerevisiae CNCM I-1077.

    PubMed

    Chaucheyras-Durand, F; Fonty, G

    2001-01-01

    We studied the effects of a yeast additive used in ruminant nutrition on the establishment of cellulolytic bacteria, on plant cell wall degradation and on digestive functions in the rumen of gnotobiotically-reared lambs. Cellulolytic bacteria inoculated to the lambs tended to become established earlier in the presence of Saccharomyces cerevisiae CNCM I-1077 (SC). In addition, their population was maintained at a higher level, when the physico-chemical conditions of the biotope were altered. In these lambs, specific activities of fibrolytic enzymes were greater, and in sacco degradation of wheat straw tended to increase. In the presence of SC there was a decrease in ruminal ammonia concentration and a higher volatile fatty acid (VFA) concentration when lambs were 20 to 50 days old. These data suggest that this yeast strain may stimulate the development of cellulolytic microflora and enhance microbial activity in the rumen of young ruminants. Such activity could be beneficial in preventing microbial imbalance and a reduction of rumen function efficiency in the case of nutritional transitions. Further studies with conventional animals will soon be performed in order to verify these dings.

  16. Polar Addition to C=C Group: Why Is Anti-Markovnikov Hydroboration-Oxidation of Alkenes Not "Anti-"?

    ERIC Educational Resources Information Center

    Ilich, Predrag-Peter; Rickertsen, Lucas S.; Becker, Erienne

    2006-01-01

    For 137 years Markovnikov's rule has been extensively used in organic chemical education and research to describe the regioselectivity in electrophilic addition reactions to alkenes and alkynes. When the structures of the final reaction products are used as reference, the rule requests that certain polar addition reactions be termed…

  17. Solvation free energy of the peptide group: its model dependence and implications for the additive-transfer free-energy model of protein stability.

    PubMed

    Tomar, Dheeraj S; Asthagiri, D; Weber, Valéry

    2013-09-17

    The group-additive decomposition of the unfolding free energy of a protein in an osmolyte solution relative to that in water poses a fundamental paradox: whereas the decomposition describes the experimental results rather well, theory suggests that a group-additive decomposition of free energies is, in general, not valid. In a step toward resolving this paradox, here we study the peptide-group transfer free energy. We calculate the vacuum-to-solvent (solvation) free energies of (Gly)n and cyclic diglycine (cGG) and analyze the data according to experimental protocol. The solvation free energies of (Gly)n are linear in n, suggesting group additivity. However, the slope interpreted as the free energy of a peptide unit differs from that for cGG scaled by a factor of half, emphasizing the context dependence of solvation. However, the water-to-osmolyte transfer free energies of the peptide unit are relatively independent of the peptide model, as observed experimentally. To understand these observations, a way to assess the contribution to the solvation free energy of solvent-mediated correlation between distinct groups is developed. We show that linearity of solvation free energy with n is a consequence of uniformity of the correlation contributions, with apparent group-additive behavior in the water-to-osmolyte transfer arising due to their cancellation. Implications for inferring molecular mechanisms of solvent effects on protein stability on the basis of the group-additive transfer model are suggested.

  18. Stereoselective synthesis of tricyclic compounds by intramolecular palladium-catalyzed addition of aryl iodides to carbonyl groups.

    PubMed

    Saadi, Jakub; Bentz, Christoph; Redies, Kai; Lentz, Dieter; Zimmer, Reinhold; Reissig, Hans-Ulrich

    2016-01-01

    Starting from γ-ketoesters with an o-iodobenzyl group we studied a palladium-catalyzed cyclization process that stereoselectively led to bi- and tricyclic compounds in moderate to excellent yields. Four X-ray crystal structure analyses unequivocally defined the structure of crucial cyclization products. The relative configuration of the precursor compounds is essentially transferred to that of the products and the formed hydroxy group in the newly generated cyclohexane ring is consistently in trans-arrangement with respect to the methoxycarbonyl group. A transition-state model is proposed to explain the observed stereochemical outcome. This palladium-catalyzed Barbier-type reaction requires a reduction of palladium(II) back to palladium(0) which is apparently achieved by the present triethylamine. PMID:27559374

  19. Stereoselective synthesis of tricyclic compounds by intramolecular palladium-catalyzed addition of aryl iodides to carbonyl groups

    PubMed Central

    Saadi, Jakub; Bentz, Christoph; Redies, Kai; Lentz, Dieter; Zimmer, Reinhold

    2016-01-01

    Summary Starting from γ-ketoesters with an o-iodobenzyl group we studied a palladium-catalyzed cyclization process that stereoselectively led to bi- and tricyclic compounds in moderate to excellent yields. Four X-ray crystal structure analyses unequivocally defined the structure of crucial cyclization products. The relative configuration of the precursor compounds is essentially transferred to that of the products and the formed hydroxy group in the newly generated cyclohexane ring is consistently in trans-arrangement with respect to the methoxycarbonyl group. A transition-state model is proposed to explain the observed stereochemical outcome. This palladium-catalyzed Barbier-type reaction requires a reduction of palladium(II) back to palladium(0) which is apparently achieved by the present triethylamine. PMID:27559374

  20. [Decomposition of hemoglobin UV absorption spectrum into absorption spectra of prosthetic group and apoprotein by means of an additive model].

    PubMed

    Lavrinenko, I A; Vashanov, G A; Artyukhov, V G

    2015-01-01

    The decomposition pathways of hemoglobin UV absorption spectrum into the absorption spectra of the protein and non-protein components are proposed and substantiated by means of an additive model. We have established that the heme component has an absorption band with a maximum at λ(max) = 269.2 nm (ε = 97163) and the apoprotein component has an absorption band with a maximum at λ(max) = 278.4 nm (ε = 48669) for the wavelength range from 240.0 to 320.0 nm. An integral relative proportion of absorption for the heme fraction (78.8%) and apoprotein (21.2%) in the investigating wavelength range is defined.

  1. Additional borehole geophysical logging at Waste Area Grouping 1 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    SciTech Connect

    Not Available

    1994-07-01

    This technical memorandum describes the borehole geophysical logging performed at selected coreholes at Waste Area Grouping 1 between March and November 1991 in support of the remedial investigation. The primary objectives of the borehole geophysical logging program were to (1) identify fractured bedrock zones and identify those fractured bedrock zones participating in active groundwater flow, (2) correlate the fractured intervals with the regional stratigraphy described, and (3) further characterize local bedrock geology and hydrogeology and gain insight about the bedrock aquifer flow system. A secondary objective was to provide stratigraphic correlations with existing logs for coreholes CH001 through CH005. Fractured bedrock zones and active or open fractures were identified in all coreholes logged. The fracture identification and analysis process was intended to distinguish between open or active fractures participating in active groundwater flow and closed or inactive fractures that are partially or completely filled (such as with calcite mineralization) and do not support groundwater circulation. Most of the fractures identified are bedding plane. Fracture occurrence varies with the different units of the Chickamauga Group; the greatest density of fractures and active fractures occurs in the upper 150 ft of stratum cored. Fractures actively contributing to groundwater flow were also identified, and direction of fluid movement within fractures was identified for those coreholes with flowmeter data.

  2. The Addition of A Pregnenolone Pendant Group Enhances the Anticancer Properties of Titanocene Dichloride in a MCF-7 Xenograft Model

    PubMed Central

    Ramos, Gladiany; Loperena, Yaliz; Ortiz, Giovanni; Reyes, Fiorella; Szeto, Ada; Vera, Jose; Velez, Javier; Morales, Jessica; Morrero, Deborah; Castillo, Linnette; Dharmawardhane, Surangani; Melendez, Enrique; Washington, A. Valance

    2014-01-01

    Background/Aim Titanocene dichloride held great promise as a chemotherapeutic compound in preclinical studies. However, subsequent clinical trials revealed hepatoxicity and nephrotoxicity, which limited its use in clinical applications. Therefore, we used steroid pendant groups to improve the targeting of titanocene in the MCF-7 breast cancer cell line, and demonstrated a 10-fold lower effective dose compared to titanocene in in vitro assays. The aim of the present study was to test the efficacy of a titanocene functionalized with pregnenolone (Ti-Preg) in an in vivo breast cancer model. Materials and Methods Xenografts from the MCF7 breast cancer cell line were implanted into athymic nu/nu mice to evaluate the potential of Ti-Preg as an anti-breast cancer agent. Results Ti-Preg demonstrated a significant inhibition of MCF-7 tumor growth when compared to vehicle and to titanocene controls. Conclusion Our findings demonstrate the potential of steroid pendent groups for targeting chemotherapeutics to steroid hormone-dependent cancer. PMID:24692689

  3. Hybrid receiver study

    NASA Technical Reports Server (NTRS)

    Stone, M. S.; Mcadam, P. L.; Saunders, O. W.

    1977-01-01

    The results are presented of a 4 month study to design a hybrid analog/digital receiver for outer planet mission probe communication links. The scope of this study includes functional design of the receiver; comparisons between analog and digital processing; hardware tradeoffs for key components including frequency generators, A/D converters, and digital processors; development and simulation of the processing algorithms for acquisition, tracking, and demodulation; and detailed design of the receiver in order to determine its size, weight, power, reliability, and radiation hardness. In addition, an evaluation was made of the receiver's capabilities to perform accurate measurement of signal strength and frequency for radio science missions.

  4. Thermochemical Properties Enthalpy, Entropy, and Heat Capacity of C1-C4 Fluorinated Hydrocarbons: Fluorocarbon Group Additivity.

    PubMed

    Wang, Heng; Castillo, Álvaro; Bozzelli, Joseph W

    2015-07-23

    Enthalpies of formation for 14 C2–C4 fluorinated hydrocarbons were calculated with nine popular ab initio and density functional theory methods: B3LYP, CBS-QB3, CBS-APNO, M06, M06-2X, ωB97X, G4, G4(MP2)-6X, and W1U via several series of isodesmic reactions. The recommended ideal gas phase ΔHf298° (kcal mol(–1)) values calculated in this study are the following: −65.4 for CH3CH2F; −70.2 for CH3CH2CH2F; −75.3 for CH3CHFCH3; −75.2 for CH3CH2CH2CH2F; −80.3 for CH3CHFCH2CH3; −108.1 for CH2F2; −120.9 for CH3CHF2; −125.8 for CH3CH2CHF2; −133.3 for CH3CF2CH3; −166.7 for CHF3; −180.5 for CH3CF3; −185.5 for CH3CH2CF3; −223.2 for CF4; and −85.8 for (CH3)3CF. Entropies (S298° in cal mol(–1) K(–1)) were estimated using B3LYP/6-31+G(d,p) computed frequencies and geometries. Rotational barriers were determined and hindered internal rotational contributions for S298°, and Cp(T) were calculated using the rigid rotor harmonic oscillator approximation, with direct integration over energy levels of the intramolecular rotation potential energy curve. Thermochemical properties for the fluorinated carbon groups C/C/F/H2, C/C2/F/H, C/C/F2/H, C/C2/F2, and C/C/F3 were derived from the above target fluorocarbons. Previously published enthalpies and groups for 1,2-difluoroethane, 1,1,2-trifluoroethane, 1,1,2,2-tetrafluoroethane, 1,1,1,2-tetrafluoroethane, 1,1,1,2,2-pentafluoroethane, 2-fluoro-2-methylpropane that were previously determined via work reaction schemes are revised using updated reference species values. Standard deviations are compared for the calculation methods.

  5. CALUTRON RECEIVER

    DOEpatents

    Barnes, S.W.

    1959-08-25

    An improvement in a calutron receiver for collecting the isotopes ts described. The electromagnetic separation of the isotopes produces a mass spectrum of closely adjacent beams of ions at the foci regions, and a dividing wall between the two pockets is arranged at an angle. Substantially all of the tons of the less abundant isotope enter one of the pockets and strike one side of the wall directly, while substantially none of the tons entering the other pocket strikes the wall directly.

  6. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  7. Addition of surfactants in ozonated water cleaning for the suppression of functional group formation and particle adhesion on the SiO2 surface

    NASA Astrophysics Data System (ADS)

    Yang, Jahyun; Im, Kyungtaek; Lim, Sangwoo

    2011-04-01

    Various kinds of surfactants were added to a cleaning solution and deionized (DI) water, and their effect on the suppression of organic function group formation and particle adhesion to a SiO2 surface was analyzed using multi-internal reflection Fourier transform infrared spectroscopy. The results implied that attached organic functional groups are affected by the chemical structure of a surfactant in DI water. Furthermore, the addition of anionic glycolic acid ethoxylate 4-tert-butylphenyl ether (GAE4E) is the most effective in terms of preventing organic group attachment and particle adhesion to the SiO2 surface, whether it was added to the cleaning solution or post-cleaning rinse water, with or without polystyrene latex particles. Moreover, it was possible to completely prevent particle adhesion to the SiO2 surface with the proper addition of GAE4E in DIO3 solution.

  8. A Multifaceted Directing Group Switching Ynones as Michael Donors in Chemo-, Enantio-, and γ-Selective 1,4-Conjugate Additions with Nitroolefins.

    PubMed

    Liu, Weiwei; Zou, Liwei; Fu, Binbin; Wang, Xinran; Wang, Ke; Sun, Zhongwen; Peng, Fangzhi; Wang, Wei; Shao, Zhihui

    2016-09-16

    α,β-Unsaturated ynones have historically been used as Michael acceptors in conjugate addition reactions. Herein, we have demonstrated for the first time that ynones can be harnessed as Michael donors for use in catalytic asymmetric conjugate addition reactions by strategically introducing a CO2t-Bu group as a multitasking directing group. Furthermore, this concept has enabled designer ynones as versatile synthetic equivalents of both α' anions of ynones and γ monoanions of 1,3-diketones, which are synthetically valued but difficult to generate. The first catalytic enantioselective conjugate addition of ynones as Michael donors has been realized in good yields with high enantioselectivities. A unified approach to regiospecifically and chemo- and enantioselectively access hitherto elusive γ-Michael adducts of 1,3-diketones has been achieved in a divergent manner. The strategy described here by exploring new reactivity and creating new reagents holds great potential applications in other still unsolved transformations. PMID:27571411

  9. A Multifaceted Directing Group Switching Ynones as Michael Donors in Chemo-, Enantio-, and γ-Selective 1,4-Conjugate Additions with Nitroolefins.

    PubMed

    Liu, Weiwei; Zou, Liwei; Fu, Binbin; Wang, Xinran; Wang, Ke; Sun, Zhongwen; Peng, Fangzhi; Wang, Wei; Shao, Zhihui

    2016-09-16

    α,β-Unsaturated ynones have historically been used as Michael acceptors in conjugate addition reactions. Herein, we have demonstrated for the first time that ynones can be harnessed as Michael donors for use in catalytic asymmetric conjugate addition reactions by strategically introducing a CO2t-Bu group as a multitasking directing group. Furthermore, this concept has enabled designer ynones as versatile synthetic equivalents of both α' anions of ynones and γ monoanions of 1,3-diketones, which are synthetically valued but difficult to generate. The first catalytic enantioselective conjugate addition of ynones as Michael donors has been realized in good yields with high enantioselectivities. A unified approach to regiospecifically and chemo- and enantioselectively access hitherto elusive γ-Michael adducts of 1,3-diketones has been achieved in a divergent manner. The strategy described here by exploring new reactivity and creating new reagents holds great potential applications in other still unsolved transformations.

  10. Establishment of a series of alien monosomic addition lines of Japanese bunching onion (Allium fistulosum L.) with extra chromosomes from shallot (A. cepa L. aggregatum group).

    PubMed

    Shigyo, M; Tashiro, Y; Isshiki, S; Miyazaki, S

    1996-12-01

    Forty one plants of alien monosomic addition lines of Allium fistulosum L. with extra chromosomes from A. cepa L. Aggregatum group (FF + nA) were produced through the second backcross of amphidiploids between these two species to A. fistulosum. Identification of the extra chromosomes in the 16 plants by elaborate karyotype analyses indicate that a complete series (eight different types) of the alien monosomic addition lines was established in Allium for the first time in this study. Chromosomal locations of malate dehydrogenase (MDH) gene, triosephosphate isomerase (TPI) gene and 5S rDNA of A. cepa Aggregatum group were determined using the series; The gene locus Mdh-1 was located on 4A, Tpi-1 on 3A and a 5S rDNA locus on 7A. Our previous and present studies using the alien monosomic addition lines revealed 11 genetic markers (isozyme and 5S rDNA) assigned to all eight chromosomes of A. cepa Aggregatum group, and these markers reconfirmed the completion of the series. Extra chromosomes of 25 other plants were examined by means of simple analyses of the chromosome markers and karyotypes. Of the total 41 plants, frequencies of the alien monosomic addition lines with extra chromosomes 1A to 8A were as follows: 1A, 5 plants; 2A, 3; 3A, 5; 4A, 9; 5A, 4; 6A, 2; 7A, 11; and 8A, 2.

  11. Establishment of a series of alien monosomic addition lines of Japanese bunching onion (Allium fistulosum L.) with extra chromosomes from shallot (A. cepa L. aggregatum group).

    PubMed

    Shigyo, M; Tashiro, Y; Isshiki, S; Miyazaki, S

    1996-12-01

    Forty one plants of alien monosomic addition lines of Allium fistulosum L. with extra chromosomes from A. cepa L. Aggregatum group (FF + nA) were produced through the second backcross of amphidiploids between these two species to A. fistulosum. Identification of the extra chromosomes in the 16 plants by elaborate karyotype analyses indicate that a complete series (eight different types) of the alien monosomic addition lines was established in Allium for the first time in this study. Chromosomal locations of malate dehydrogenase (MDH) gene, triosephosphate isomerase (TPI) gene and 5S rDNA of A. cepa Aggregatum group were determined using the series; The gene locus Mdh-1 was located on 4A, Tpi-1 on 3A and a 5S rDNA locus on 7A. Our previous and present studies using the alien monosomic addition lines revealed 11 genetic markers (isozyme and 5S rDNA) assigned to all eight chromosomes of A. cepa Aggregatum group, and these markers reconfirmed the completion of the series. Extra chromosomes of 25 other plants were examined by means of simple analyses of the chromosome markers and karyotypes. Of the total 41 plants, frequencies of the alien monosomic addition lines with extra chromosomes 1A to 8A were as follows: 1A, 5 plants; 2A, 3; 3A, 5; 4A, 9; 5A, 4; 6A, 2; 7A, 11; and 8A, 2. PMID:9080683

  12. Group additivity values for estimating the enthalpy of formation of organic compounds: an update and reappraisal. 2. C, H, N, O, S, and halogens.

    PubMed

    Holmes, John L; Aubry, Christiane

    2012-07-01

    This study extends a previous publication on group additivity values (GAVs) for the elements C, H, and O, to include the elements nitrogen, sulfur, and the halogens. The present state and utility of the Benson additivity schemes for estimating the enthalpy of formation (Δ(f)H(0)) of organic compounds are again described, extending them to include more elements. Old and new GAVs for a wide variety of compounds are provided and are revised where necessary. When new terms are proposed, or old ones are significantly altered, the rationale for so doing is presented. GAV derived ring strain values for benzene and pyridine indicate that the aromatic stabilization of each is essentially the same. As before, the thermochemical consequences of replacing one functional group by another are also shown, thus permitting quick shortcuts to the estimation of new Δ(f)H(0) values.

  13. Radiation receiver

    DOEpatents

    Hunt, Arlon J.

    1983-01-01

    The apparatus for collecting radiant energy and converting same to alternate energy form includes a housing having an interior space and a radiation transparent window allowing, for example, solar radiation to be received in the interior space of the housing. Means are provided for passing a stream of fluid past said window and for injecting radiation absorbent particles in said fluid stream. The particles absorb the radiation and because of their very large surface area, quickly release the heat to the surrounding fluid stream. The fluid stream particle mixture is heated until the particles vaporize. The fluid stream is then allowed to expand in, for example, a gas turbine to produce mechanical energy. In an aspect of the present invention properly sized particles need not be vaporized prior to the entrance of the fluid stream into the turbine, as the particles will not damage the turbine blades. In yet another aspect of the invention, conventional fuel injectors are provided to inject fuel into the fluid stream to maintain the proper temperature and pressure of the fluid stream should the source of radiant energy be interrupted. In yet another aspect of the invention, an apparatus is provided which includes means for providing a hot fluid stream having hot particles disbursed therein which can radiate energy, means for providing a cooler fluid stream having cooler particles disbursed therein, which particles can absorb radiant energy and means for passing the hot fluid stream adjacent the cooler fluid stream to warm the cooler fluid and cooler particles by the radiation from the hot fluid and hot particles.

  14. Radiation receiver

    DOEpatents

    Hunt, A.J.

    1983-09-13

    The apparatus for collecting radiant energy and converting same to alternate energy form includes a housing having an interior space and a radiation transparent window allowing, for example, solar radiation to be received in the interior space of the housing. Means are provided for passing a stream of fluid past said window and for injecting radiation absorbent particles in said fluid stream. The particles absorb the radiation and because of their very large surface area, quickly release the heat to the surrounding fluid stream. The fluid stream particle mixture is heated until the particles vaporize. The fluid stream is then allowed to expand in, for example, a gas turbine to produce mechanical energy. In an aspect of the present invention properly sized particles need not be vaporized prior to the entrance of the fluid stream into the turbine, as the particles will not damage the turbine blades. In yet another aspect of the invention, conventional fuel injectors are provided to inject fuel into the fluid stream to maintain the proper temperature and pressure of the fluid stream should the source of radiant energy be interrupted. In yet another aspect of the invention, an apparatus is provided which includes means for providing a hot fluid stream having hot particles disbursed therein which can radiate energy, means for providing a cooler fluid stream having cooler particles disbursed therein, which particles can absorb radiant energy and means for passing the hot fluid stream adjacent the cooler fluid stream to warm the cooler fluid and cooler particles by the radiation from the hot fluid and hot particles. 5 figs.

  15. Taxonomy of the hyper-diverse ant genus Tetramorium Mayr in the Malagasy region (Hymenoptera, Formicidae, Myrmicinae) – first record of the T. setigerum species group and additions to the Malagasy species groups with an updated illustrated identification key

    PubMed Central

    Hita Garcia, Francisco; Fisher, Brian L.

    2015-01-01

    Abstract In this study we provide an update to the taxonomy of the ant genus Tetramorium Mayr in Madagascar. We report the first record of the Tetramorium setigerum species group in Madagascar and describe the only Malagasy representative as Tetramorium cavernicola sp. n., which is known only from a cave in Ankarana. In addition, we provide an overview of the 19 proposed Malagasy species groups, and discuss their zoogeography and relationships to other groups and larger lineages within the hyper-diverse genus Tetramorium. At present, we recognise a highly unique Malagasy Tetramorium fauna with 113 species endemic to the island of Madagascar out of a total of 125 translating into an endemism rate of 93%. We hypothesise that this fauna is based on one or a few colonisation events from the Afrotropical region, with subsequent adaptive radiation in Madagascar. Furthermore, we present an updated and illustrated identification key to the Tetramorium species groups in the Malagasy region. PMID:26257564

  16. A Helical Polyphenylacetylene Having Amino Alcohol Moieties Without Chiral Side Groups as a Chiral Ligand for the Asymmetric Addition of Diethylzinc to Benzaldehyde.

    PubMed

    Liu, Lijia; Long, Qing; Aoki, Toshiki; Zhang, Geng; Kaneko, Takashi; Teraguchi, Masahiro; Zhang, Chunhong; Wang, Yudan

    2015-08-01

    One-handed helical polyphenylacetylenes having achiral amino alcohol moieties, but no chiral side groups, were synthesized by the helix-sense-selective copolymerization of an achiral phenylacetylene having an amino alcohol side group with a phenylacetylene having two hydroxyl groups. Since the resulting helical copolymers were successfully utilized as chiral ligands for the enantioselective alkylation of benzaldehyde with diethylzinc, we can conclude that the main-chain chirality based on the one-handed helical conformation is useful for the chiral catalysis of an asymmetric reaction for the first time. The enantioselectivities of the reaction were controlled by the optical purities of the helical polymer ligands. In addition, the polymer ligands could be easily recovered by precipitation after the reaction.

  17. Quality of Life of Older Patients With Early-Stage Breast Cancer Receiving Adjuvant Chemotherapy: A Companion Study to Cancer and Leukemia Group B 49907

    PubMed Central

    Kornblith, Alice B.; Lan, Lan; Archer, Laura; Partridge, Ann; Kimmick, Gretchen; Hudis, Clifford; Winer, Eric; Casey, Rebecca; Bennett, Samantha; Cohen, Harvey Jay; Muss, Hyman B.

    2011-01-01

    Purpose A phase III trial (Cancer and Leukemia Group B CALGB-49907) was conducted to test whether older patients with early-stage breast cancer would have equivalent relapse-free and overall survival with capecitabine compared with standard chemotherapy. The quality of life (QoL) substudy tested whether capecitabine treatment would be associated with a better QoL than standard chemotherapy. Patients and Methods QoL was assessed in 350 patients randomly assigned to either standard chemotherapy (cyclophosphamide, methotrexate, and fluorouracil [CMF] or doxorubicin and cyclophosphamide [AC]; n = 182) or capecitabine (n = 168). Patients were interviewed by telephone before treatment (baseline), midtreatment, within 1 month post-treatment, and at 12, 18, and 24 months postbaseline by using questionnaires from the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire C30 (EORTC QLQ-C30), a breast systemic adverse effects scale (EORTC BR23), and the Hospital Anxiety and Depression Scale (HADS). Results Compared with patients who were treated with standard chemotherapy, patients who were treated with capecitabine had significantly better QoL, role function, and social function, fewer systemic adverse effects, less psychological distress, and less fatigue during and at the completion of treatment (P ≤ .005). Capecitabine treatment was associated with less nausea, vomiting, and constipation and with better appetite than standard treatment (P ≤ .004), but worse hand-foot syndrome and diarrhea (P < .005). These differences all resolved by 12 months. Conclusion Standard chemotherapy was superior to capecitabine in improving relapse-free and overall survival for older women with early-stage breast cancer. Although capecitabine was associated with better QoL during treatment, QoL was similar for both groups at 1 year. The brief period of poorer QoL with standard treatment is a modest price to pay for a chance at improved survival. PMID

  18. Different Effect of the Additional Electron-Withdrawing Cyano Group in Different Conjugation Bridge: The Adjusted Molecular Energy Levels and Largely Improved Photovoltaic Performance.

    PubMed

    Li, Huiyang; Fang, Manman; Hou, Yingqin; Tang, Runli; Yang, Yizhou; Zhong, Cheng; Li, Qianqian; Li, Zhen

    2016-05-18

    Four organic sensitizers (LI-68-LI-71) bearing various conjugated bridges were designed and synthesized, in which the only difference between LI-68 and LI-69 (or LI-70 and LI-71) was the absence/presence of the CN group as the auxiliary electron acceptor. Interestingly, compared to the reference dye of LI-68, LI-69 bearing the additional CN group exhibited the bad performance with the decreased Jsc and Voc values. However, once one thiophene moiety near the anchor group was replaced by pyrrole with the electron-rich property, the resultant LI-71 exhibited a photoelectric conversion efficiency increase by about 3 folds from 2.75% (LI-69) to 7.95% (LI-71), displaying the synergistic effect of the two moieties (CN and pyrrole). Computational analysis disclosed that pyrrole as the auxiliary electron donor (D') in the conjugated bridge can compensate for the lower negative charge in the electron acceptor, which was caused by the CN group as the electron trap, leading to the more efficient electron injection and better photovoltaic performance.

  19. Glutathione-S-transferase (GST) polymorphism among ethnic groups in Singapore with report of additional alleles at loci 1 and 2.

    PubMed

    Bhattacharyya, S P; Saha, N; Wee, K P

    1989-04-01

    Glutathione S-transferases (GST; E.C.2.5.1.18) were phenotyped by starch gel electrophoresis in post-mortem liver samples from 683 unrelated subjects of both sexes. 305 were Chinese, 185 Indians, 147 Malays and 46 from other racial groups of South-East Asia. GST1 and GST2 were found to be polymorphic in these populations. Additional alleles (GST1*3 and GST2*O) were observed at low frequency in all the ethnic groups. The frequency of GST1*1 was lower and that of GST1*2 was higher in Indians and Malays as compared to Chinese. GST1*0 and GST1*3 frequencies were similar in all these ethnic groups. The gene frequencies of the alleles of the GST2 locus varied significantly in the population studied. GST2*0 frequency was significantly higher in Indians than in Chinese and Malays, while the lowest frequency of GST2*1 was found in the Indians. GST2*2 frequency was higher in the Malays than in Chinese and Indians. GST1 and GST2 phenotype distributions were in agreement with Hardy-Weinberg equilibrium in all the ethnic groups studied. Sex made no significant difference in the phenotype distribution.

  20. Influence of additional load on the moments of the agonist and antagonist muscle groups at the knee joint during closed chain exercise.

    PubMed

    Rao, Guillaume; Amarantini, David; Berton, Eric

    2009-06-01

    The present study investigated the influence of additional loads on the knee net joint moment, flexor and extensor muscle group moments, and cocontraction index during a closed chain exercise. Loads of 8, 28, or 48 kg (i.e., respectively, 11.1+/-1.5%, 38.8+/-5.3%, and 66.4+/-9.0% of body mass) were added to subjects during dynamic half squats. The flexor and extensor muscular moments and the amount of cocontraction were estimated at the knee joint using an EMG-and-optimization model that includes kinematics, ground reaction, and EMG measurements as inputs. In general, our results showed a significant influence of the Load factor on the net knee joint moment, the extensor muscular moment, and the flexor muscle group moment (all Anova p<.05). Hence we confirmed an increase in muscle moments with increasing load and moreover, we also showed an original "more than proportional" evolution of the flexor and extensor muscle group moments relative to the knee net joint moment. An influence of the Phase (i.e., descent vs. ascent) factor was also seen, revealing different activation strategies from the central nervous system depending on the mode of contraction of the agonist muscle group. The results of the present work could find applications in clinical fields, especially for rehabilitation protocols.

  1. Different Effect of the Additional Electron-Withdrawing Cyano Group in Different Conjugation Bridge: The Adjusted Molecular Energy Levels and Largely Improved Photovoltaic Performance.

    PubMed

    Li, Huiyang; Fang, Manman; Hou, Yingqin; Tang, Runli; Yang, Yizhou; Zhong, Cheng; Li, Qianqian; Li, Zhen

    2016-05-18

    Four organic sensitizers (LI-68-LI-71) bearing various conjugated bridges were designed and synthesized, in which the only difference between LI-68 and LI-69 (or LI-70 and LI-71) was the absence/presence of the CN group as the auxiliary electron acceptor. Interestingly, compared to the reference dye of LI-68, LI-69 bearing the additional CN group exhibited the bad performance with the decreased Jsc and Voc values. However, once one thiophene moiety near the anchor group was replaced by pyrrole with the electron-rich property, the resultant LI-71 exhibited a photoelectric conversion efficiency increase by about 3 folds from 2.75% (LI-69) to 7.95% (LI-71), displaying the synergistic effect of the two moieties (CN and pyrrole). Computational analysis disclosed that pyrrole as the auxiliary electron donor (D') in the conjugated bridge can compensate for the lower negative charge in the electron acceptor, which was caused by the CN group as the electron trap, leading to the more efficient electron injection and better photovoltaic performance. PMID:27101840

  2. Balancing cardiovascular and gastrointestinal risks in patients with osteoarthritis receiving nonsteroidal anti‑inflammatory drugs. A summary of guidelines from an international expert group.

    PubMed

    Mosleh, Wassim; Farkouh, Michael E

    2016-01-01

    Over the past 2 decades, extensive research has assessed the use of traditional nonsteroidal anti‑inflammatory drugs (NSAIDs), and the newer cyclooxygenase‑2 (COX-2) inhibitor drugs, in the treatment of chronic pain syndromes. The proper use of NSAIDs has been the subject of significant debate, bringing together multidisciplinary researchers and clinicians to discuss the risks and benefits of these therapies. Current guidelines discussing the proper use of NSAIDs do not address the issue of the risks of COX‑2‑selective NSAIDs and nonselective NSAIDs for both the gastrointestinal (GI) and cardiovascular (CV) systems in patients on low‑dose aspirin. Accordingly, a multidisciplinary expert group was organized to review the current evidence with the aim of developing statements devoted to guide clinicians in making evidence‑based and individualized selections of NSAIDs. This review will discuss and summarize the most recent evidence on this topic to give an insight into the most effective and safest therapeutic options, thus preventing serious adverse CV and GI events. NSAIDs should be used cautiously and as infrequently as possible, with nonpharmacological approaches prescribed first. If the use of NSAIDs is required, the choice should balance the possible CV and GI risks.

  3. Mass transport in low Tg azo-polymers: Effect on the surface relief grating induction and stability of additional side chain groups able to generate physical interactions

    NASA Astrophysics Data System (ADS)

    Luca, Alina Raicu; Moleavin, Ioana-Andreea; Hurduc, Nicolae; Hamel, Matthieu; Rocha, Licinio

    2014-01-01

    The nanostructuration ability of low glass transition temperature (Tg) azo-polysiloxanes films is investigated at working temperatures close or higher than the film Tg. The behavior of materials incorporating additional side chain nitrobenzene or naphthalene groups and as a result presenting different Tg is compared in terms of the surface modulation dynamics and stability of the induced topographic modifications. This comparison is carried out under light exposure and in dark environment. We demonstrate the ability to optically generate surface modulations on these materials even at operating temperatures corresponding to the film Tg. Along with a modification of the opto-mechanic properties correlated with the materials chemical structure, a collapse of the surface structures occurring with different dynamics in materials of similar Tg is highlighted. These observations suggest the existence of an additional mechanism rather than a purely thermal redistribution of the polymer chains in the films.

  4. Silicon Photo-Receivers

    NASA Astrophysics Data System (ADS)

    Zimmermann, Horst

    The properties of photodiodes being exploitable in standard bipolar, CMOS, and BiCMOS technologies are summarized. In addition examples of advanced photodiodes will be introduced in order to show how the properties of integrated photodiodes can be improved significantly by minor process modifications. Furthermore, examples of optoelectronic integrated circuits (OEICs) for such important applications like optical storage systems and optical fiber receivers are described. New trends for the circuit topology of digital-video-disk (DVD) and digital-video-recording (DVR) read-OEICs are covered. Progress of OEIC receivers for optical data transmission and communication as well as optical interconnects is also summarized.

  5. Cell-specific CO2 fixation rates of two distinct groups of plastidic protists in the Atlantic Ocean remain unchanged after nutrient addition.

    PubMed

    Grob, Carolina; Jardillier, Ludwig; Hartmann, Manuela; Ostrowski, Martin; Zubkov, Mikhail V; Scanlan, David J

    2015-04-01

    To assess the role of open-ocean ecosystems in global CO2 fixation, we investigated how picophytoplankton, which dominate primary production, responded to episodic increases in nutrient availability. Previous experiments have shown nitrogen alone, or in combination with phosphorus or iron, to be the proximate limiting nutrient(s) for total phytoplankton grown over several days. Much less is known about how nutrient upshift affects picophytoplankton CO2 fixation over the duration of the light period. To address this issue, we performed a series of small volume (8-60 ml) - short term (10-11 h) nutrient addition experiments in different regions of the Atlantic Ocean using NH4 Cl, FeCl3 , K medium, dust and nutrient-rich water from 300 m depth. We found no significant nutrient stimulation of group-specific CO2 fixation rates of two taxonomically and size-distinct groups of plastidic protists. The above was true regardless of the region sampled or nutrient added, suggesting that this is a generic phenomenon. Our findings show that at least in the short term (i.e. daylight period), nutrient availability does not limit CO2 fixation by the smallest plastidic protists, while their taxonomic composition does not determine their response to nutrient addition. PMID:25345650

  6. Cell-specific CO2 fixation rates of two distinct groups of plastidic protists in the Atlantic Ocean remain unchanged after nutrient addition.

    PubMed

    Grob, Carolina; Jardillier, Ludwig; Hartmann, Manuela; Ostrowski, Martin; Zubkov, Mikhail V; Scanlan, David J

    2015-04-01

    To assess the role of open-ocean ecosystems in global CO2 fixation, we investigated how picophytoplankton, which dominate primary production, responded to episodic increases in nutrient availability. Previous experiments have shown nitrogen alone, or in combination with phosphorus or iron, to be the proximate limiting nutrient(s) for total phytoplankton grown over several days. Much less is known about how nutrient upshift affects picophytoplankton CO2 fixation over the duration of the light period. To address this issue, we performed a series of small volume (8-60 ml) - short term (10-11 h) nutrient addition experiments in different regions of the Atlantic Ocean using NH4 Cl, FeCl3 , K medium, dust and nutrient-rich water from 300 m depth. We found no significant nutrient stimulation of group-specific CO2 fixation rates of two taxonomically and size-distinct groups of plastidic protists. The above was true regardless of the region sampled or nutrient added, suggesting that this is a generic phenomenon. Our findings show that at least in the short term (i.e. daylight period), nutrient availability does not limit CO2 fixation by the smallest plastidic protists, while their taxonomic composition does not determine their response to nutrient addition.

  7. Production and characterization of alien chromosome additions in shallot (Allium cepa L. Aggregatum group) carrying extra chromosome(s) of Japanese bunching onion (A. fistulosum L.).

    PubMed

    Hang, Tran Thi Minh; Shigyo, Masayoshi; Yamauchi, Naoki; Tashiro, Yosuke

    2004-10-01

    First and second backcrosses of amphidiploid hybrids (2n = 4x = 32, genomes AAFF) between shallot (Allium cepa Aggregatum group) and A. fistulosum were conducted to produce A. cepa - A. fistulosum alien addition lines. When shallot (A. cepa Aggregatum group) was used as a pollinator, the amphidiploids and allotriploids set germinable BC(1) and BC(2) seeds, respectively. The 237 BC(1) plants mainly consisted of 170 allotriploids (2n = 3x = 24, AAF) and 42 hypo-allotriploids possessing 23 chromosomes, i.e., single-alien deletions (2n = 3x-1 = 23, AAF-nF). The single-alien deletions in the BC(1) progeny showed dwarfing characteristics and were discriminated from the allotriploids (2n = 24) and hyper-allotriploids (2n = 25) by means of flow cytometric analysis. The chromosome numbers of 46 BC(2) seedlings varied from 16 to 24. Eight monosomic additions (2n = 2x+1 = 17, AA+nF) and 20 single-alien deletions were found in these BC(2) seedlings. Consequently, six kinds of A. cepa - A. fistulosum alien chromosome additions possessing different chromosome numbers (2n = 17, 18, 20, 21, 22, 23) were recognized in the BC(1) and BC(2) populations. A total of 79 aneuploids, including 62 single-alien deletions, were analyzed by a chromosome 6F-specific isozyme marker (Got-2) in order to recognize its existence in their chromosome complements. This analysis revealed that two out of 62 single-alien deletions did not possess 6F. One (AAF-6F) out of the possible eight single-alien deletions could be identified at first. The present study is a first step toward the development of a useful tool, such as a complete set of eight different single-alien deletions, for the rapid chromosomal assignment of genes and genetic markers in A. fistulosum.

  8. Production and characterization of alien chromosome additions in shallot (Allium cepa L. Aggregatum group) carrying extra chromosome(s) of Japanese bunching onion (A. fistulosum L.).

    PubMed

    Hang, Tran Thi Minh; Shigyo, Masayoshi; Yamauchi, Naoki; Tashiro, Yosuke

    2004-10-01

    First and second backcrosses of amphidiploid hybrids (2n = 4x = 32, genomes AAFF) between shallot (Allium cepa Aggregatum group) and A. fistulosum were conducted to produce A. cepa - A. fistulosum alien addition lines. When shallot (A. cepa Aggregatum group) was used as a pollinator, the amphidiploids and allotriploids set germinable BC(1) and BC(2) seeds, respectively. The 237 BC(1) plants mainly consisted of 170 allotriploids (2n = 3x = 24, AAF) and 42 hypo-allotriploids possessing 23 chromosomes, i.e., single-alien deletions (2n = 3x-1 = 23, AAF-nF). The single-alien deletions in the BC(1) progeny showed dwarfing characteristics and were discriminated from the allotriploids (2n = 24) and hyper-allotriploids (2n = 25) by means of flow cytometric analysis. The chromosome numbers of 46 BC(2) seedlings varied from 16 to 24. Eight monosomic additions (2n = 2x+1 = 17, AA+nF) and 20 single-alien deletions were found in these BC(2) seedlings. Consequently, six kinds of A. cepa - A. fistulosum alien chromosome additions possessing different chromosome numbers (2n = 17, 18, 20, 21, 22, 23) were recognized in the BC(1) and BC(2) populations. A total of 79 aneuploids, including 62 single-alien deletions, were analyzed by a chromosome 6F-specific isozyme marker (Got-2) in order to recognize its existence in their chromosome complements. This analysis revealed that two out of 62 single-alien deletions did not possess 6F. One (AAF-6F) out of the possible eight single-alien deletions could be identified at first. The present study is a first step toward the development of a useful tool, such as a complete set of eight different single-alien deletions, for the rapid chromosomal assignment of genes and genetic markers in A. fistulosum. PMID:15599056

  9. Percentage of Surgical Patients Receiving Recommended Care

    MedlinePlus

    ... Recommended Care Percentage of Surgical Patients Receiving Recommended Care This is a composite measure based on individual ... Age Group Percentage of Surgical Patients Receiving Recommended Care by Age Group uzrc-9bvr Download these data » ...

  10. Molecular and biochemical identification of alien chromosome additions in shallot (Allium cepa L. Aggregatum group) carrying extra chromosome(s) of bunching onion (A. fistulosum L.).

    PubMed

    Yaguchi, Shigenori; Hang, Tran Thi Minh; Tsukazaki, Hikaru; Hoa, Vu Quynh; Masuzaki, Shin-ichi; Wako, Tadayuki; Masamura, Noriya; Onodera, Shuichi; Shiomi, Norio; Yamauchi, Naoki; Shigyo, Masayoshi

    2009-02-01

    To develop the bunching onion (Allium fistulosum L.; genomes, FF) chromosome-specific genetic markers for identifying extra chromosomes, eight shallot (A. cepa L. Aggregatum group; genomes, AA)--A. fistulosum monosomic addition plants (AA+nF) and 62 shallot--A. fistulosum single-alien deletion plants (AAF-nF) were analyzed by 23 different chromosome-specific genetic markers of shallot. The eight monosomic addition plants consisted of one AA+2F, two AA+6F, and five AA+8F. Of the 62 single-alien deletion plants, 60 could be identified as six different single-alien deletion lines (AAF-1F, -3F, -4F, -6F, -7F, and -8F) out of the eight possible types. Several single-alien deletion lines were classified on the basis of leaf and bulb characteristics. AAF-8F had the largest number of expanded leaves of five deletion plants. AAF-7F grew most vigorously, as expressed by its long leaf blade and biggest bulb size. AAF-4F had very small bulbs. AAF-7F and AAF-8F had different bulbs from those of shallot as well as other types of single-alien deletion lines in skin and outer scale color. Regarding the sugar content of the bulb tissues, the single-alien deletion lines showed higher fructan content than shallot. Moreover, shallot could not produce fructan with degree of polymerization (DP) 12 or higher, although the single-alien deletion lines showed DP 20 or higher. The content of S-alk(en)yl-L-cysteine sulfoxide (ACSO) in the single-alien deletion lines was significantly lower than that in shallot. These results indicated that chromosomes from A. fistulosum might carry anonymous factors to increase the highly polymerized fructan production and inhibit the synthesis of ACSO in shallot bulbs. Accordingly, alien chromosomes from A. fistulosum in shallot would contribute to modify the quality of shallot bulbs.

  11. Molecular and biochemical identification of alien chromosome additions in shallot (Allium cepa L. Aggregatum group) carrying extra chromosome(s) of bunching onion (A. fistulosum L.).

    PubMed

    Yaguchi, Shigenori; Hang, Tran Thi Minh; Tsukazaki, Hikaru; Hoa, Vu Quynh; Masuzaki, Shin-ichi; Wako, Tadayuki; Masamura, Noriya; Onodera, Shuichi; Shiomi, Norio; Yamauchi, Naoki; Shigyo, Masayoshi

    2009-02-01

    To develop the bunching onion (Allium fistulosum L.; genomes, FF) chromosome-specific genetic markers for identifying extra chromosomes, eight shallot (A. cepa L. Aggregatum group; genomes, AA)--A. fistulosum monosomic addition plants (AA+nF) and 62 shallot--A. fistulosum single-alien deletion plants (AAF-nF) were analyzed by 23 different chromosome-specific genetic markers of shallot. The eight monosomic addition plants consisted of one AA+2F, two AA+6F, and five AA+8F. Of the 62 single-alien deletion plants, 60 could be identified as six different single-alien deletion lines (AAF-1F, -3F, -4F, -6F, -7F, and -8F) out of the eight possible types. Several single-alien deletion lines were classified on the basis of leaf and bulb characteristics. AAF-8F had the largest number of expanded leaves of five deletion plants. AAF-7F grew most vigorously, as expressed by its long leaf blade and biggest bulb size. AAF-4F had very small bulbs. AAF-7F and AAF-8F had different bulbs from those of shallot as well as other types of single-alien deletion lines in skin and outer scale color. Regarding the sugar content of the bulb tissues, the single-alien deletion lines showed higher fructan content than shallot. Moreover, shallot could not produce fructan with degree of polymerization (DP) 12 or higher, although the single-alien deletion lines showed DP 20 or higher. The content of S-alk(en)yl-L-cysteine sulfoxide (ACSO) in the single-alien deletion lines was significantly lower than that in shallot. These results indicated that chromosomes from A. fistulosum might carry anonymous factors to increase the highly polymerized fructan production and inhibit the synthesis of ACSO in shallot bulbs. Accordingly, alien chromosomes from A. fistulosum in shallot would contribute to modify the quality of shallot bulbs. PMID:19420800

  12. Mometasone Furoate Effect on Acute Skin Toxicity in Breast Cancer Patients Receiving Radiotherapy: A Phase III Double-Blind, Randomized Trial From the North Central Cancer Treatment Group N06C4

    SciTech Connect

    Miller, Robert C.; Schwartz, David J.; Sloan, Jeff A.; Griffin, Patricia C.; Deming, Richard L.; Anders, Jon C.; Stoffel, Thomas J.; Haselow, Robert E.; Schaefer, Paul L.; Bearden, James D.; Atherton, Pamela J.; Loprinzi, Charles L.; Martenson, James A.

    2011-04-01

    Purpose: A two-arm, double-blind, randomized trial was performed to evaluate the effect of 0.1% mometasone furoate (MMF) on acute skin-related toxicity in patients undergoing breast or chest wall radiotherapy. Methods and Materials: Patients with ductal carcinoma in situ or invasive breast carcinoma who were undergoing external beam radiotherapy to the breast or chest wall were randomly assigned to apply 0.1% MMF or placebo cream daily. The primary study endpoint was the provider-assessed maximal grade of Common Terminology Criteria for Adverse Events, version 3.0, radiation dermatitis. The secondary endpoints included provider-assessed Common Terminology Criteria for Adverse Events Grade 3 or greater radiation dermatitis and adverse event monitoring. The patient-reported outcome measures included the Skindex-16, the Skin Toxicity Assessment Tool, a Symptom Experience Diary, and a quality-of-life self-assessment. An assessment was performed at baseline, weekly during radiotherapy, and for 2 weeks after radiotherapy. Results: A total of 176 patients were enrolled between September 21, 2007, and December 7, 2007. The provider-assessed primary endpoint showed no difference in the mean maximum grade of radiation dermatitis by treatment arm (1.2 for MMF vs. 1.3 for placebo; p = .18). Common Terminology Criteria for Adverse Events toxicity was greater in the placebo group (p = .04), primarily from pruritus. For the patient-reported outcome measures, the maximum Skindex-16 score for the MMF group showed less itching (p = .008), less irritation (p = .01), less symptom persistence or recurrence (p = .02), and less annoyance with skin problems (p = .04). The group's maximal Skin Toxicity Assessment Tool score showed less burning sensation (p = .02) and less itching (p = .002). Conclusion: Patients receiving daily MMF during radiotherapy might experience reduced acute skin toxicity compared with patients receiving placebo.

  13. Effects of silver and group II fluoride solid lubricant additions to plasma-sprayed chromium carbide coatings for foil gas bearings to 650 C

    NASA Technical Reports Server (NTRS)

    Wagner, R. C.; Sliney, Harold E.

    1986-01-01

    A new self-lubricating coating composition of nickel aluminide-bonded chromium carbide formulated with silver and Group II fluorides was developed in a research program on high temperature solid lubricants. One of the proposed applications for this new coating composition is as a wide temperature spectrum solid lubricant for complaint foil gas bearings. Friction and wear properties were obtained using a foil gas bearing start-stop apparatus at temperatures from 25 to 650 C. The journals were Inconel 748. Some were coated with the plasma sprayed experimental coating, others with unmodified nickel aluminide/chromium carbide as a baseline for comparison. The additional components were provided to assist in achieving low friction over the temperature range of interest. Uncoated, preoxidized Inconel X-750 foil bearings were operated against these surfaces. The foils were subjected to repeated start/stop cycles under a 14-kPa (2-Psi) bearing unit loading. Sliding contact occurred during lift-off and coastdown at surface velocities less than 6 m/s (3000 rPm). Testing continued until 9000 start/stop cycles were accumulated or until a rise in starting torque indicated the journal/bearing had failed. Comparison in coating performance as well as discussions of their properties and methods of application are given.

  14. Effects of silver and Group II fluorides addition to plasma sprayed chromium carbide high temperature solid lubricant for foil gas bearings to 650/sup 0/C

    SciTech Connect

    Wagner, R.C.; Sliney, H.E.

    1985-01-01

    A new self-lubricating coating composition of nickel aluminide-bonded chromium carbide fromulated with silver and Group II fluorides was developed. One of the proposed applications for this new coating composition is as a wide temperature spectrum solid lubricant for compliant foil gas bearings. Friction and wear properties were obtained using a foil gas bearing start/stop apparatus at temperatures from 25 to 650/sup 0/C. The journals were Inconel 718. Some were coated with the plasma sprayed experimental coating, others with unmodified nickel aluminide/chromium carbide as a baseline for comparison. The additional components were provided to assist in achieving low friction over the temperature range of interest. Uncoated, preoxidized inconel X-750 foil bearing were operated against these surfaces. The foils were subjected to repeated start/stop cycles under a 14-kPa (2-psi) bearing unit loading. Sliding contact occurred during lift-off and coastdown at surface velocities less than 6 m/s (3000 rpm). Testing continued until 9000 start/stop cycles were accumulated or until a rise in starting torque indicated the journal/bearing had failed. Comparison in coating performance as well as discussions of their properties and methods of application are given.

  15. Thermochemical Properties and Bond Dissociation Energies for Fluorinated Methanol, CH3-xFxOH, and Fluorinated Methyl Hydroperoxides, CH3-xFxOOH: Group Additivity.

    PubMed

    Wang, Heng; Bozzelli, Joseph W

    2016-09-01

    Oxygenated fluorocarbons are routinely found in sampling of environmental soils and waters as a result of the widespread use of fluoro and chlorofluoro carbons as heat transfer fluids, inert materials, polymers, fire retardants and solvents; the influence of these chemicals on the environment is a growing concern. The thermochemical properties of these species are needed for understanding their stability and reactions in the environment and in thermal process. Structures and thermochemical properties on the mono- to trifluoromethanol, CH3-xFxOH, and fluoromethyl hydroperoxide, CH3-xFxOOH (1 ≤ x ≤ 3), are determined by CBS-QB3, CBS-APNO, and G4 calculations. Entropy, S°298, and heat capacities, Cp(T)'s (300 ≤ T/K ≤ 1500) from vibration, translation, and external rotation contributions are calculated on the basis of the vibration frequencies and structures obtained from the B3LYP/6-31+G(d,p) density functional method. Potential barriers for the internal rotations are also calculated from this method and used to calculate hindered rotor contributions to S°298 and Cp(T)'s using direct integration over energy levels of the internal rotational potentials. Standard enthalpies of formation, ΔfH°298 (units in kcal mol(-1)) are CH2FOOH (-83.7), CHF2OOH (-138.1), CF3OOH (-193.6), CH2FOO(•) (-44.9), CHF2OO(•) (-99.6), CF3OO(•) (-153.8), CH2FOH (-101.9), CHF2OH (-161.6), CF3OH (-218.1), CH2FO(•) (-49.1), CHF2O(•) (-97.8), CF3O(•) (-150.5), CH2F(•) (-7.6), CHF2(•) (-58.8), and CF3(•) (-112.6). Bond dissociation energies for the R-OOH, RO-OH, ROO-H, R-OO(•), RO-O(•), R-OH, RO-H, R-O(•), and R-H bonds are determined and compared with methyl hydroperoxide to observe the trends from added fluoro substitutions. Enthalpy of formation for the fluoro-hydrocarbon oxygen groups C/F/H2/O, C/F2/H/O, C/F3/O, are derived from the above fluorinated methanol and fluorinated hydroperoxide species for use in Benson's Group Additivity. It was determined that

  16. Developing regionalized models of lithospheric thickness and velocity structure across Eurasia and the Middle East from jointly inverting P-wave and S-wave receiver functions with Rayleigh wave group and phase velocities

    SciTech Connect

    Julia, J; Nyblade, A; Hansen, S; Rodgers, A; Matzel, E

    2009-07-06

    In this project, we are developing models of lithospheric structure for a wide variety of tectonic regions throughout Eurasia and the Middle East by regionalizing 1D velocity models obtained by jointly inverting P-wave and S-wave receiver functions with Rayleigh wave group and phase velocities. We expect the regionalized velocity models will improve our ability to predict travel-times for local and regional phases, such as Pg, Pn, Sn and Lg, as well as travel-times for body-waves at upper mantle triplication distances in both seismic and aseismic regions of Eurasia and the Middle East. We anticipate the models will help inform and strengthen ongoing and future efforts within the NNSA labs to develop 3D velocity models for Eurasia and the Middle East, and will assist in obtaining model-based predictions where no empirical data are available and for improving locations from sparse networks using kriging. The codes needed to conduct the joint inversion of P-wave receiver functions (PRFs), S-wave receiver functions (SRFs), and dispersion velocities have already been assembled as part of ongoing research on lithospheric structure in Africa. The methodology has been tested with synthetic 'data' and case studies have been investigated with data collected at an open broadband stations in South Africa. PRFs constrain the size and S-P travel-time of seismic discontinuities in the crust and uppermost mantle, SRFs constrain the size and P-S travel-time of the lithosphere-asthenosphere boundary, and dispersion velocities constrain average S-wave velocity within frequency-dependent depth-ranges. Preliminary results show that the combination yields integrated 1D velocity models local to the recording station, where the discontinuities constrained by the receiver functions are superimposed to a background velocity model constrained by the dispersion velocities. In our first year of this project we will (i) generate 1D velocity models for open broadband seismic stations in the

  17. Is adjuvant chemotherapy of benefit for postmenopausal women who receive endocrine treatment for highly endocrine-responsive, node-positive breast cancer? International Breast Cancer Study Group Trials VII and 12-93.

    PubMed

    Pagani, Olivia; Gelber, Shari; Simoncini, Edda; Castiglione-Gertsch, Monica; Price, Karen N; Gelber, Richard D; Holmberg, Stig B; Crivellari, Diana; Collins, John; Lindtner, Jurij; Thürlimann, Beat; Fey, Martin F; Murray, Elizabeth; Forbes, John F; Coates, Alan S; Goldhirsch, Aron

    2009-08-01

    To compare the efficacy of chemoendocrine treatment with that of endocrine treatment (ET) alone for postmenopausal women with highly endocrine responsive breast cancer. In the International Breast Cancer Study Group (IBCSG) Trials VII and 12-93, postmenopausal women with node-positive, estrogen receptor (ER)-positive or ER-negative, operable breast cancer were randomized to receive either chemotherapy or endocrine therapy or combined chemoendocrine treatment. Results were analyzed overall in the cohort of 893 patients with endocrine-responsive disease, and according to prospectively defined categories of ER, age and nodal status. STEPP analyses assessed chemotherapy effect. The median follow-up was 13 years. Adding chemotherapy reduced the relative risk of a disease-free survival event by 19% (P = 0.02) compared with ET alone. STEPP analyses showed little effect of chemotherapy for tumors with high levels of ER expression (P = 0.07), or for the cohort with one positive node (P = 0.03). Chemotherapy significantly improves disease-free survival for postmenopausal women with endocrine-responsive breast cancer, but the magnitude of the effect is substantially attenuated if ER levels are high.

  18. Addition of cyclosporin-A to chemotherapy in secondary (post-MDS) AML in the elderly. A multicenter randomized trial of the Leukemia Working Group of the Hellenic Society of Hematology.

    PubMed

    Matsouka, P; Pagoni, M; Zikos, P; Giannakoulas, N; Apostolidis, I; Asprogeraka, T; Arvanitopoulou, E; Spanoudakis, E; Kotsianidis, I; Tsatalas, K; Papaioannou, M; Marinakis, T; Skandali, A; Viniou, N; Yataganas, X; Bakiri, M

    2006-04-01

    In elderly patients with secondary leukemia, poor therapeutic response and low overall survival have been attributed mainly to age and to the primary resistance of leukemic cells to chemotherapy. Modulation of resistance has been attempted in different studies, but the results have been contradictory. We conducted an open, randomized multicenter clinical trial involving patients more than 60 years old with secondary leukemia preceded by a myelodysplastic syndrome. The induction chemotherapy regimen included idarubicin, cytarabine, and etoposide (group A); randomization involved simultaneous administration of cyclosporin-A per os (group B). Fifty-five patients were evaluated, 26 in group A and 29 in group B. Overall complete remission was achieved in 40% of the patients, 27% vs 52% in groups A and B, respectively (p=0.01). Leukemia-free survival was more favorable in patients who received cyclosporin-A, 12 vs 7 months for groups B and A, respectively (p=0.03). In a follow up period of 30 months, 7 out of 55 patients (13%) were alive, 4 of whom were in complete remission. Five out of the 7 alive patients were randomized in group B and had received cyclosporin-A. Treatment failure was higher in group A [19 of 26 patients (73%)] than in group B with CsA [14 of 29 patients (48%)] (p<0.0001). Treatment-related toxicity/mortality was 13%. Modulation of drug resistance by CsA in elderly people suffering from secondary acute leukemia may improve the outcome of chemotherapy without increasing drug toxicity and treatment-related mortality.

  19. OAST Space Theme Workshop. Volume 3: Working group summary. 3: Sensors (E-3). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2). D. Additional assessment

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Developments required to support the space power, SETI, solar system exploration and global services programs are identified. Instrumentation and calibration sensors (rather than scientific) are needed for the space power system. Highly sophisticated receivers for narrowband detection of microwave sensors and sensors for automated stellar cataloging to provide a mapping data base for SETI are needed. Various phases of solar system exploration require large area solid state imaging arrays from UV to IR; a long focal plane telescope; high energy particle detectors; advanced spectrometers; a gravitometer; and atmospheric distanalyzer; sensors for penetrometers; in-situ sensors for surface chemical analysis, life detection, spectroscopic and microscopic analyses of surface soils, and for meteorological measurements. Active and passive multiapplication sensors, advanced multispectral scanners with improved resolution in the UV and IR ranges, and laser techniques for advanced probing and oceanographic characterization will enhance for global services.

  20. Male mice housed in groups engage in frequent fighting and show a lower response to additional bone loading than females or individually housed males that do not fight.

    PubMed

    Meakin, Lee B; Sugiyama, Toshihiro; Galea, Gabriel L; Browne, William J; Lanyon, Lance E; Price, Joanna S

    2013-05-01

    Experiments to investigate bone's physiological adaptation to mechanical loading frequently employ models that apply dynamic loads to bones in vivo and assess the changes in mass and architecture that result. It is axiomatic that bones will only show an adaptive response if the applied artificial loading environment differs in a significant way from that to which the bones have been habituated by normal functional loading. It is generally assumed that this normal loading is similar between experimental groups. In the study reported here we found that this was not always the case. Male and female 17-week-old C57BL/6 mice were housed in groups of six, and a single episode (40 cycles) of non-invasive axial loading, engendering 2,200 με on the medial surface of the proximal tibiae in sample mice, was applied to right tibiae on alternate days for two weeks. This engendered an adaptive increase in bone mass in females, but not males. Observation revealed the main difference in behaviour between males and females was that males were involved in fights 1.3 times per hour, whereas the females never fought. We therefore housed all mice individually. In females, there was a similar significant osteogenic response to loading in cortical and trabecular bone of both grouped and individual mice. In contrast, in males, adaptive increases in the loaded compared with non-loaded control bones was only apparent in animals housed individually. Our interpretation of these findings is that the frequent vigorous fighting that occurs between young adult males housed in groups could be sufficient to engender peak strains and strain rates that equal or exceed the stimulus derived from artificial loading. This indicates the importance of ensuring that physical activity is consistent between groups. Reducing the background level of the naturally engendered strain environment allows adaptive responses to artificial loading to be demonstrated at lower loads.

  1. Spaceborne receivers: Basic principles

    NASA Technical Reports Server (NTRS)

    Stacey, J. M.

    1984-01-01

    The underlying principles of operation of microwave receivers for space observations of planetary surfaces were examined. The design philosophy of the receiver as it is applied to operate functionally as an efficient receiving system, the principle of operation of the key components of the receiver, and the important differences among receiver types are explained. The operating performance and the sensitivity expectations for both the modulated and total power receiver configurations are outlined. The expressions are derived from first principles and are developed through the important intermediate stages to form practicle and easily applied equations. The transfer of thermodynamic energy from point to point within the receiver is illustrated. The language of microwave receivers is applied statistics.

  2. Solar heat receiver

    DOEpatents

    Hunt, Arlon J.; Hansen, Leif J.; Evans, David B.

    1985-01-01

    A receiver for converting solar energy to heat a gas to temperatures from 700.degree.-900.degree. C. The receiver is formed to minimize impingement of radiation on the walls and to provide maximum heating at and near the entry of the gas exit. Also, the receiver is formed to provide controlled movement of the gas to be heated to minimize wall temperatures. The receiver is designed for use with gas containing fine heat absorbing particles, such as carbon particles.

  3. Solar heat receiver

    DOEpatents

    Hunt, A.J.; Hansen, L.J.; Evans, D.B.

    1982-09-29

    A receiver is described for converting solar energy to heat a gas to temperatures from 700 to 900/sup 0/C. The receiver is formed to minimize impingement of radiation on the walls and to provide maximum heating at and near the entry of the gas exit. Also, the receiver is formed to provide controlled movement of the gas to be heated to minimize wall temperatures. The receiver is designed for use with gas containing fine heat absorbing particles, such as carbon particles.

  4. MtsR is a dual regulator that controls virulence genes and metabolic functions in addition to metal homeostasis in the group A streptococcus.

    PubMed

    Toukoki, Chadia; Gold, Kathryn M; McIver, Kevin S; Eichenbaum, Zehava

    2010-05-01

    MtsR is a metal-dependent regulator in the group A streptococcus (GAS) that directly represses the transcription of genes involved in haem and metal uptake. While MtsR has been implicated in GAS virulence, the DNA recognition and full regulatory scope exerted by the protein are unknown. In this study we identified the shr promoter (P(shr)) and mapped MtsR binding to a 69 bp segment in P(shr) that overlaps the core promoter elements. A global transcriptional analysis demonstrated that MtsR modulates the expression of 64 genes in GAS, 44 of which were upregulated and 20 were downregulated in the mtsR mutant. MtsR controls genes with diverse functions including metal homeostasis, nucleic acid and amino acid metabolism, and protein fate. Importantly, the MtsR regulon includes mga, emm49 and ska, which are central for GAS pathogenesis. MtsR binding to the promoter region of both negatively and positively regulated genes demonstrates that it functions as a dual regulator. MtsR footprints are large (47-130 bp) and vary between target promoters. A 16 bp motif that consists of an interrupted palindrome is implicated in the DNA recognition by the metalloregulator. In conclusion, we report here that MtsR is a global regulator in GAS that shapes the expression of vital virulence factors and genes involved in metabolic functions and metal transport, and we discuss the implications for the GAS disease process.

  5. Effects of silver and group 2 fluorides addition to plasma sprayed chromium carbide high temperature solid lubricant for foil gas bearing to 650 deg C

    NASA Technical Reports Server (NTRS)

    Wagner, R. C.; Sliney, H. E.

    1984-01-01

    A new self-lubricating coating composition of nickel aluminide-bonded chromium carbide formulated with silver and Group II fluorides was developed in a research program on high temperature solid lubricants. One of the proposed applications for this new coating composition is as a wide temperature spectrum solid lubricant for complaint foil gas bearings. Friction and wear properties were obtained using a foil gas bearing start/stop apparatus at temperatures from 25 to 650 C. The journals were Inconel 718. Some were coated with the plasma sprayed experimental coating, others with unmodified nickel aluminide/chromium carbide as a baseline for comparison. The addtitional components were provided to assist in achieving low friction over the temperature range of interest. Uncoated, preoxidized Inconel X-750 foil bearings were operated against these surfaces. The foils were subjected to repeated start/stop cycles under a 14-kPa (2-psi) bearing unit loading. Sliding contact occurred during lift-off and coastdown at surface velocities less than 6 m/s (3000 rpm). Testing continued until 9000 start/stop cycles were accumulated or until a rise in starting torque indicated the journal/bearing had failed. Comparison in coating performance as well as discussions of their properties and methods of application are given.

  6. [Introduction of additional thiol groups into glucoamylase in Aspergillus awamori and their effect on the thermal stability and catalytic activity of the enzyme].

    PubMed

    Surzhik, M A; Shmidt, A E; Glazunov, E A; Firsov, D L; Petukhov, M G

    2014-01-01

    Five mutant forms of glucoamylase (GA) from the filamentous fungus Aspergillus awamori with artificial disulfide bonds (4D-G137A\\A14C, 6D-A14C\\Y419C\\G137A, 10D-V13C\\G396C, 11D-V13C\\G396C\\A14C\\Y419C\\G137A, and 20D-G137A\\A246C\\A14C) were constructed using computer simulation and experimentally tested for thermostability. The introduction of two additional disulfide bonds between its first and thirteenth alpha-helices and that of the loop located close to a catalytic residue--E400--made it possible to assess the effects of disulfide bridges on protein thermostability. The mutant proteins with combined amino acid substitutions G137A\\A14C, V13C\\G396C\\A14C\\Y419C\\G137A, and G137A\\A246C\\A14C showed higher thermal stability as compared to the wild-type protein. At the same time, new disulfide bridges in the mutant A14C\\Y419C\\G137A and V13C\\G396C proteins led to the destabilization of their structure and the loss of thermal stability.

  7. Amino group combined P/Ge and P/Sn Lewis pairs: synthesis and dipolar addition reactions to alkyne and aldehyde molecules.

    PubMed

    Yu, Ying; Li, Jiancheng; Liu, Weiping; Ye, Qingsong; Zhu, Hongping

    2016-04-14

    Amino group combined P/Ge-based frustrated Lewis pairs (FLPs) Ph2PN(R)GeCl3 (R = 2,6-iPr2C6H3 (1), 2,4,6-Me3C6H2 (2), and C6H11 (3)) and Ph2PN(2,6-iPr2C6H3)GeMe3 (4) as well as P/Sn-based FLP Ph2PN(2,6-iPr2C6H3)SnMe3 (5) were prepared and utilized for reactions with alkyne and aldehyde molecules. Compounds 1-3 each reacted with MeO2CC[triple bond, length as m-dash]CCO2Me to give zwitterionic cyclic vinyls [Ph2PN(R)GeCl3](MeO2CC[double bond, length as m-dash]CCO2Me) (6-8) and compound 1 reacted with HC[triple bond, length as m-dash]CCO2Me to give the similar compound [Ph2PN(2,4,6-Me3C6H2)GeCl3](HC[double bond, length as m-dash]CCO2Me) (9). Compound 4 reacted with RC[triple bond, length as m-dash]CCO2Me to afford acyclic vinyls 2,6-iPr2C6H3N[double bond, length as m-dash]P(Ph2)C(R)[double bond, length as m-dash]C(CO2Me)GeMe3 (R = CO2Me (10), H (11)) and 5 reacted with MeO2CC[triple bond, length as m-dash]CCO2Me to give 2,6-iPr2C6H3N[double bond, length as m-dash]P(Ph2)C(CO2Me)[double bond, length as m-dash]C(CO2Me)SnMe3 (12). The reactions of 1 with CH3CH2CHO and 1,4-(CHO)2C6H4 were also investigated and yielded novel zwitterionic OCPNGe five-heteroatom cycles [Ph2PN(2,6-iPr2C6H3)GeCl3][CH(CH2CH3)O] (13) and [Ph2PN(2,6-iPr2C6H3)GeCl3][p-(OCH)C6H4CHO][Cl3GeN(2,6-iPr2C6H3)PPh2] (14). Compounds 1-14 were characterized by NMR ((1)H, (13)C, and (31)P) and CHN elemental analysis, of which 1, 7, and 10-14 were further studied by X-ray crystallography. The reactions of 4 (or 5) with RC[triple bond, length as m-dash]CCO2Me to produce 10-12 present a novel way of obtaining the germyl (or stannyl) and iminophosphoranyl co-substituted vinyls.

  8. Amino group combined P/Ge and P/Sn Lewis pairs: synthesis and dipolar addition reactions to alkyne and aldehyde molecules.

    PubMed

    Yu, Ying; Li, Jiancheng; Liu, Weiping; Ye, Qingsong; Zhu, Hongping

    2016-04-14

    Amino group combined P/Ge-based frustrated Lewis pairs (FLPs) Ph2PN(R)GeCl3 (R = 2,6-iPr2C6H3 (1), 2,4,6-Me3C6H2 (2), and C6H11 (3)) and Ph2PN(2,6-iPr2C6H3)GeMe3 (4) as well as P/Sn-based FLP Ph2PN(2,6-iPr2C6H3)SnMe3 (5) were prepared and utilized for reactions with alkyne and aldehyde molecules. Compounds 1-3 each reacted with MeO2CC[triple bond, length as m-dash]CCO2Me to give zwitterionic cyclic vinyls [Ph2PN(R)GeCl3](MeO2CC[double bond, length as m-dash]CCO2Me) (6-8) and compound 1 reacted with HC[triple bond, length as m-dash]CCO2Me to give the similar compound [Ph2PN(2,4,6-Me3C6H2)GeCl3](HC[double bond, length as m-dash]CCO2Me) (9). Compound 4 reacted with RC[triple bond, length as m-dash]CCO2Me to afford acyclic vinyls 2,6-iPr2C6H3N[double bond, length as m-dash]P(Ph2)C(R)[double bond, length as m-dash]C(CO2Me)GeMe3 (R = CO2Me (10), H (11)) and 5 reacted with MeO2CC[triple bond, length as m-dash]CCO2Me to give 2,6-iPr2C6H3N[double bond, length as m-dash]P(Ph2)C(CO2Me)[double bond, length as m-dash]C(CO2Me)SnMe3 (12). The reactions of 1 with CH3CH2CHO and 1,4-(CHO)2C6H4 were also investigated and yielded novel zwitterionic OCPNGe five-heteroatom cycles [Ph2PN(2,6-iPr2C6H3)GeCl3][CH(CH2CH3)O] (13) and [Ph2PN(2,6-iPr2C6H3)GeCl3][p-(OCH)C6H4CHO][Cl3GeN(2,6-iPr2C6H3)PPh2] (14). Compounds 1-14 were characterized by NMR ((1)H, (13)C, and (31)P) and CHN elemental analysis, of which 1, 7, and 10-14 were further studied by X-ray crystallography. The reactions of 4 (or 5) with RC[triple bond, length as m-dash]CCO2Me to produce 10-12 present a novel way of obtaining the germyl (or stannyl) and iminophosphoranyl co-substituted vinyls. PMID:26658532

  9. Phase II Study of the Addition of Bevacizumab to Standard Chemoradiation for Loco-regionally Advanced Nasopharyngeal Carcinoma: Radiation Therapy Oncology Group (RTOG) Trial 0615

    PubMed Central

    Lee, Nancy Y.; Zhang, Ed; Pfister, David. G.; Kim, John; Garden, Adam. S.; Mechalakos, James; Hu, Kenneth; Le, Quynh T.; Colevas, A. Dimitrios; Glisson, Bonnie S.; Chan, Anthony T.C.; Ang, K. Kian

    2016-01-01

    Purpose We sought to improve the outcomes for loco-regionally advanced nasopharyngeal carcinoma (NPC) by testing the feasibility/safety of adding bevacizumab to chemoradiation. Patients/Methods Eligible patients with ≥T2b and/or positive node(s) were prescribed 3 cycles of bevacizumab (15 mg/kg) and cisplatin (100 mg/m2) both given on days 1, 22, and 43 of radiation (70 Gy) using IMRT delivered over 33 days on a daily basis, Monday through Friday. This is followed by 3 cycles of bevacizumab (15 mg/kg), cisplatin (80 mg/m2) both were given on days 64, 85, and 106 and fluorouracil (1000 mg/m2/d) on days 64–67, 85–88, 106–109 after radiation. The primary endpoint was to evaluate the safety of the addition of bevacizumab to chemoradiation, specifically looking at treatment-related Grade 4 hemorrhage and/or any Grade 5 adverse event in the first year. Toxicity during and after treatment were collected along with tumor control endpoints. The analysis was done per protocol. This protocol has completed its target accrual. Results There were a total of 46 patients enrolled in this study of whom 44 patients were eligible for analysis. No grade 3–4 hemorrhage or grade 5 adverse events were observed; 9 patients (20.5%) experienced grade 1–2 hemorrhage. Grade 4 adverse events were experienced by the following numbers of patients: leukopenia NOS – 6; lymphopenia – 5; neutrophil count – 5; pharyngolaryngeal pain – 2; hemoglobin – 1; infection with grade 3–4 neutrophils (blood) – 1; infection with grade 3–4 neutrophils [skin (cellulitis)] – 1; tinnitus – 1; thrombosis – 1; radiation mucositis – 1. The most common grade 3 adverse events were radiation mucositis – 33; dysphagia – 25; and mucositis/stomatitis (clinical exam) (pharynx) – 15. Two patients experienced late grade 3 xerostomia. Other late grade 3 adverse events were: dysphagia – 5; hearing impaired – 3; neuralgia NOS – 2; constitutional symptoms (other) – 1; dehydration

  10. Data-fusion receiver

    SciTech Connect

    Gabelmann, Jeffrey M.; Kattner, J. Stephen; Houston, Robert A.

    2006-12-19

    This invention is an ultra-low frequency electromagnetic telemetry receiver which fuses multiple input receive sources to synthesize a decodable message packet from a noise corrupted telemetry message string. Each block of telemetry data to be sent to the surface receiver from a borehole tool is digitally encoded into a data packet prior to transmission. The data packet is modulated onto the ULF EM carrier wave and transmitted from the borehole to the surface and then are simultaneously detected by multiple receive sensors disbursed within the rig environment. The receive sensors include, but are not limited to, electric field and magnetic field sensors. The spacing of the surface receive elements is such that noise generators are unequally coupled to each receive element due to proximity and/or noise generator type (i.e. electric or magnetic field generators). The receiver utilizes a suite of decision metrics to reconstruct the original, non noise-corrupted data packet from the observation matrix via the estimation of individual data frames. The receiver will continue this estimation process until: 1) the message validates, or 2) a preset "confidence threshold" is reached whereby frames within the observation matrix are no longer "trusted".

  11. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  12. The First Six ALMA Band 10 Receivers

    NASA Astrophysics Data System (ADS)

    Fujii, Y.; Gonzalez, A.; Kroug, M.; Kaneko, K.; Miyachi, A.; Yokoshima, T.; Kuroiwa, K.; Ogawa, H.; Makise, K.; Wang, Z.; Uzawa, Y.

    2013-01-01

    The first six Atacama Large Millimeter/submillimeter Array (ALMA) Band 10 (787-950 GHz) receivers have been developed and characterized during the receiver preproduction phase. State-of-the-art measurement systems at THz frequencies have been implemented and successfully used to measure the performance of the first six receivers. Extensive tests ranging from receiver sensitivity and stability to optical aperture efficiency on the secondary antenna have been performed. Performance of all six receivers is well within the stringent ALMA requirements. Moreover, our extensive tests have shown that there are no big performance differences between receivers. These results indicate that the ALMA Band 10 receiver is ready for the production phase, during which an additional 67 receivers will be produced and characterized.

  13. A zero-power radio receiver.

    SciTech Connect

    Brocato, Robert Wesley

    2004-09-01

    This report describes both a general methodology and some specific examples of passive radio receivers. A passive radio receiver uses no direct electrical power but makes sole use of the power available in the radio spectrum. These radio receivers are suitable as low data-rate receivers or passive alerting devices for standard, high power radio receivers. Some zero-power radio architectures exhibit significant improvements in range with the addition of very low power amplifiers or signal processing electronics. These ultra-low power radios are also discussed and compared to the purely zero-power approaches.

  14. CALUTRON RECEIVER STRUCTURE

    DOEpatents

    Roush, J.L.

    1959-09-01

    A receiver is described for collecting isotopes in a calutron The receiver has several compartments, formed by a sertes of parallel metal plates and an open front. Each plate has flanges which space it from the other plates and a flexible extension pressing against a common supporting red to maintain the plate in assembled relation when all but the last rod is removed. The plates may be removed individualy from the front of the receiver, cleaned ard replaced without disturbing the alignment of the other plates.

  15. Does finger sense predict addition performance?

    PubMed

    Newman, Sharlene D

    2016-05-01

    The impact of fingers on numerical and mathematical cognition has received a great deal of attention recently. However, the precise role that fingers play in numerical cognition is unknown. The current study explores the relationship between finger sense, arithmetic and general cognitive ability. Seventy-six children between the ages of 5 and 12 participated in the study. The results of stepwise multiple regression analyses demonstrated that while general cognitive ability including language processing was a predictor of addition performance, finger sense was not. The impact of age on the relationship between finger sense, and addition was further examined. The participants were separated into two groups based on age. The results showed that finger gnosia score impacted addition performance in the older group but not the younger group. These results appear to support the hypothesis that fingers provide a scaffold for calculation and that if that scaffold is not properly built, it has continued differential consequences to mathematical cognition. PMID:26993292

  16. Ultrasonic pulser-receiver

    DOEpatents

    Taylor, Steven C.

    2006-09-12

    Ultrasonic pulser-receiver circuitry, for use with an ultrasonic transducer, the circuitry comprising a circuit board; ultrasonic pulser circuitry supported by the circuit board and configured to be coupled to an ultrasonic transducer and to cause the ultrasonic transducer to emit an ultrasonic output pulse; receiver circuitry supported by the circuit board, coupled to the pulser circuitry, including protection circuitry configured to protect against the ultrasonic pulse and including amplifier circuitry configured to amplify an echo, received back by the transducer, of the output pulse; and a connector configured to couple the ultrasonic transducer directly to the circuit board, to the pulser circuitry and receiver circuitry, wherein impedance mismatches that would result if the transducer was coupled to the circuit board via a cable can be avoided.

  17. Solar energy receiver

    DOEpatents

    Schwartz, Jacob

    1978-01-01

    An improved long-life design for solar energy receivers provides for greatly reduced thermally induced stress and permits the utilization of less expensive heat exchanger materials while maintaining receiver efficiencies in excess of 85% without undue expenditure of energy to circulate the working fluid. In one embodiment, the flow index for the receiver is first set as close as practical to a value such that the Graetz number yields the optimal heat transfer coefficient per unit of pumping energy, in this case, 6. The convective index for the receiver is then set as closely as practical to two times the flow index so as to obtain optimal efficiency per unit mass of material.

  18. Receiver Gain Modulation Circuit

    NASA Technical Reports Server (NTRS)

    Jones, Hollis; Racette, Paul; Walker, David; Gu, Dazhen

    2011-01-01

    A receiver gain modulation circuit (RGMC) was developed that modulates the power gain of the output of a radiometer receiver with a test signal. As the radiometer receiver switches between calibration noise references, the test signal is mixed with the calibrated noise and thus produces an ensemble set of measurements from which ensemble statistical analysis can be used to extract statistical information about the test signal. The RGMC is an enabling technology of the ensemble detector. As a key component for achieving ensemble detection and analysis, the RGMC has broad aeronautical and space applications. The RGMC can be used to test and develop new calibration algorithms, for example, to detect gain anomalies, and/or correct for slow drifts that affect climate-quality measurements over an accelerated time scale. A generalized approach to analyzing radiometer system designs yields a mathematical treatment of noise reference measurements in calibration algorithms. By treating the measurements from the different noise references as ensemble samples of the receiver state, i.e. receiver gain, a quantitative description of the non-stationary properties of the underlying receiver fluctuations can be derived. Excellent agreement has been obtained between model calculations and radiometric measurements. The mathematical formulation is equivalent to modulating the gain of a stable receiver with an externally generated signal and is the basis for ensemble detection and analysis (EDA). The concept of generating ensemble data sets using an ensemble detector is similar to the ensemble data sets generated as part of ensemble empirical mode decomposition (EEMD) with exception of a key distinguishing factor. EEMD adds noise to the signal under study whereas EDA mixes the signal with calibrated noise. It is mixing with calibrated noise that permits the measurement of temporal-functional variability of uncertainty in the underlying process. The RGMC permits the evaluation of EDA by

  19. Central solar energy receiver

    DOEpatents

    Drost, M. Kevin

    1983-01-01

    An improved tower-mounted central solar energy receiver for heating air drawn through the receiver by an induced draft fan. A number of vertically oriented, energy absorbing, fin-shaped slats are radially arranged in a number of concentric cylindrical arrays on top of the tower coaxially surrounding a pipe having air holes through which the fan draws air which is heated by the slats which receive the solar radiation from a heliostat field. A number of vertically oriented and wedge-shaped columns are radially arranged in a number of concentric cylindrical clusters surrounding the slat arrays. The columns have two mirror-reflecting sides to reflect radiation into the slat arrays and one energy absorbing side to reduce reradiation and reflection from the slat arrays.

  20. Zero-power receiver

    DOEpatents

    Brocato, Robert W.

    2016-10-04

    An unpowered signal receiver and a method for signal reception detects and responds to very weak signals using pyroelectric devices as impedance transformers and/or demodulators. In some embodiments, surface acoustic wave devices (SAW) are also used. Illustrative embodiments include satellite and long distance terrestrial communications applications.

  1. Submillimeter wave heterodyne receiver

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Goutam (Inventor); Manohara, Harish (Inventor); Siegel, Peter H. (Inventor); Ward, John (Inventor)

    2011-01-01

    In an embodiment, a submillimeter wave heterodyne receiver includes a finline ortho-mode transducer comprising thin tapered metallic fins deposited on a thin dielectric substrate to separate a vertically polarized electromagnetic mode from a horizontally polarized electromagnetic mode. Other embodiments are described and claimed.

  2. Simplified OMEGA receivers

    NASA Technical Reports Server (NTRS)

    Burhans, R. W.

    1974-01-01

    The details are presented of methods for providing OMEGA navigational information including the receiver problem at the antenna and informational display and housekeeping systems based on some 4 bit data processing concepts. Topics discussed include the problem of limiters, zero crossing detectors, signal envelopes, internal timing circuits, phase counters, lane position displays, signal integrators, and software mapping problems.

  3. Olympus beacon receiver

    NASA Technical Reports Server (NTRS)

    Ostergaard, Jens

    1988-01-01

    A medium-size Beacon Receiving System for reception and processing of the B1 (20 GHz) and B2 (30 GHz) beacons from Olympus has been developed. Integration of B1 and B2 receiving equipment into one system using one antenna and a common computer for control and data processing provides the advantages of a compact configuration and synchronization of the two receiver chains. Range for co-polar signal attenuation meaurement is about 30 dB for both beacons, increasing to 40 dB for B2 if the receivers are synchronized to B1. The accuracy is better than 0.5 dB. Cross-polarization discriminations of the order of 10 to 30 dB may be determined with an accuracy of 1 to 2 dB. A number of radiometers for complementary measurements of atmospheric attenuation of 13 to 30 GHz has also been constructed. A small multi-frequency system for operation around 22 GHz and 31 GHz is presently under development.

  4. Hanson receives Macelwane Medal

    NASA Astrophysics Data System (ADS)

    Ravishankara, A. R.; Hanson, David R.

    At the 1996 Spring Meeting in Baltimore, Maryland, David R. Hanson received the 1996 James B. Macelwane Medal, which recognizes significant contributions to the geophysical sciences by a young scientist of outstanding ability. The medal citation and Hanson's response are given here.

  5. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  6. A digital beacon receiver

    NASA Technical Reports Server (NTRS)

    Ransome, Peter D.

    1988-01-01

    A digital satellite beacon receiver is described which provides measurement information down to a carrier/noise density ratio approximately 15 dB below that required by a conventional (phase locked loop) design. When the beacon signal fades, accuracy degrades gracefully, and is restored immediately (without hysteresis) on signal recovery, even if the signal has faded into the noise. Benefits of the digital processing approach used include the minimization of operator adjustments, stability of the phase measuring circuits with time, repeatability between units, and compatibility with equipment not specifically designed for propagation measuring. The receiver has been developed for the European Olympus satellite which has continuous wave (CW) beacons at 12.5 and 29.7 GHz, and a switched polarization beacon at 19.8 GHz approximately, but the system can be reconfigured for CW and polarization-switched beacons at other frequencies.

  7. Multichannel homodyne receiver

    DOEpatents

    Landt, Jeremy A.

    1982-01-01

    A homodyne radar transmitter/receiver device which produces a single combined output which contains modulated backscatter information for all phase conditions of both modulated and unmodulated backscatter signals. The device utilizes taps along coaxial transmission lines, strip transmission line, and waveguides which are spaced by 1/8 wavelength or 1/6 wavelength, etc. This greatly reduces costs by eliminating separate transmission and reception antennas and an expensive arrangement of power splitters and mixers utilized in the prior art.

  8. Multichannel homodyne receiver

    DOEpatents

    Landt, J.A.

    1981-01-19

    A homodyne radar transmitter/receiver device which produces a single combined output which contains modulated backscatter information for all phase conditions of both modulated and unmodulated backscatter signals is described. The device utilizes taps along coaxial transmission lines, strip transmission line, and waveguides which are spaced by 1/8 wavelength or 1/6 wavelength, etc. This greatly reduces costs by eliminating separate transmission and reception antennas and an expensive arrangement of power splitters and mixers utilized in the prior art.

  9. Design of radar receivers

    NASA Astrophysics Data System (ADS)

    Sokolov, M. A.

    This handbook treats the design and analysis of of pulsed radar receivers, with emphasis on elements (especially IC elements) that implement optimal and suboptimal algorithms. The design methodology is developed from the viewpoint of statistical communications theory. Particular consideration is given to the synthesis of single-channel and multichannel detectors, the design of analog and digital signal-processing devices, and the analysis of IF amplifiers.

  10. Density Functional Theory-Derived Group Additivity and Linear Scaling Methods for Prediction of Oxygenate Stability on Metal Catalysts. Adsorption of Open-Ring Alcohol and Polyol Dehydrogenation Intermediates on Pt-Based Metals

    SciTech Connect

    Salciccioli, Michael; Chen, Ying; Vlachos, Dion G.

    2010-11-09

    Semiempirical methods for prediction of thermochemical properties of adsorbed oxygenates are developed. Periodic density functional theory calculations are used to study the relative stability of ethanol, ethylene glycol, isopropyl alcohol, and glycerol dehydrogenation intermediates on Pt(111). For ethylene glycol dehydrogenation intermediates, it is found that the thermodynamically favored intermediates at each level of dehydrogenation are as follows: HOCH2CHOH, HOCHCHOH, HOCHCOH, HOCCOH ≈ HOCHCO, HOCCO, OCCO. Structural and energetic patterns emerge from these C2HxO2 adsorption calculations that lead to the formation of group additive properties for thermochemical property prediction of oxygenates on Pt(111). Finally, linear scaling relationships of atomic binding energy are used to predict the binding energy of the C2HxO2 species on the Ni(111) surface and Ni-Pt-Pt(111) bimetallic surface. It is shown that the linear scaling relationships can accurately predict the binding energy of larger oxygenates as well as of oxygenates on bimetallic catalysts. Corrections for ring strain and weak oxygen-metal and hydrogen-bonding interactions are added to increase the accuracy of group additivity and linear scaling relationships.

  11. A work group report on ultrafine particles (American Academy of Allergy, Asthma & Immunology): Why ambient ultrafine and engineered nanoparticles should receive special attention for possible adverse health outcomes in human subjects.

    PubMed

    Li, Ning; Georas, Steve; Alexis, Neil; Fritz, Patricia; Xia, Tian; Williams, Marc A; Horner, Elliott; Nel, Andre

    2016-08-01

    Ultrafine particles (UFPs) are airborne particulates of less than 100 nm in aerodynamic diameter. Examples of UFPs are diesel exhaust particles, products of cooking, heating, and wood burning in indoor environments, and, more recently, products generated through the use of nanotechnology. Studies have shown that ambient UFPs have detrimental effects on both the cardiovascular and respiratory systems, including a higher incidence of atherosclerosis and exacerbation rate of asthma. UFPs have been found to alter in vitro and in vivo responses of the immune system to allergens and can also play a role in allergen sensitization. The inflammatory properties of UFPs can be mediated by a number of different mechanisms, including the ability to produce reactive oxygen species, leading to the generation of proinflammatory cytokines and airway inflammation. In addition, because of their small size, UFPs also have unique distribution characteristics in the respiratory tree and circulation and might be able to alter cellular function in ways that circumvent normal signaling pathways. Additionally, UFPs can penetrate intracellularly and potentially cause DNA damage. The recent advances in nanotechnology, although opening up new opportunities for the advancement of technology and medicine, could also lead to unforeseen adverse health effects in exposed human subjects. Further research is needed to clarify the safety of nanoscale particles, as well as the elucidation of the possible beneficial use of these particulates to treat disease.

  12. Prospective Evaluation of Quality of Life and Neurocognitive Effects in Patients With Multiple Brain Metastases Receiving Whole-Brain Radiotherapy With or Without Thalidomide on Radiation Therapy Oncology Group (RTOG) Trial 0118

    SciTech Connect

    Corn, Benjamin W. Moughan, Jennifer M.S.; Knisely, Jonathan P.S.; Fox, Sherry W.; Chakravarti, Arnab; Yung, W.K. Alfred; Curran, Walter J.; Robins, H. Ian; Brachman, David G.; Henderson, Randal H.; Mehta, Minesh P.; Movsas, Benjamin

    2008-05-01

    Purpose: Radiation Therapy Oncology Group (RTOG) 0118 randomized patients with multiple brain metastases to whole-brain radiotherapy (WBRT) {+-} thalidomide. This secondary analysis of 156 patients examined neurocognitive and quality of life (QOL) outcomes. Methods and Materials: Quality of life was determined with the Spitzer Quality of Life Index (SQLI). The Folstein Mini-Mental Status Exam (MMSE) assessed neurocognitive function. SQLI and MMSE were administered at baseline and at 2-month intervals. MMSE was scored with a threshold value associated with neurocognitive functioning (absolute cutoff level of 23) and with the use of corrections for age and educational level. Results: Baseline SQLI predicted survival. Patients with SQLI of 7-10 vs. <7 had median survival time (MST) of 4.8 vs. 3.1 months, p = 0.05. Both arms showed steady neurocognitive declines, but SQLI scores remained stable. Higher levels of neurocognitive decline were observed with age and education-level corrections. Of patients considered baseline age/educational level neurocognitive failures, 32% died of intracranial progression. Conclusions: Quality of life and neuropsychological testing can be prospectively administered on a Phase III cooperative group trial. The MMSE should be evaluated with adjustments for age and educational level. Baseline SQLI is predictive of survival. Despite neurocognitive declines, QOL remained stable during treatment and follow-up. Poor neurocognitive function may predict clinical deterioration. Lack of an untreated control arm makes it difficult to determine the contribution of the respective interventions (i.e., WBRT, thalidomide) to neurocognitive decline. The RTOG has developed a trial to study the role of preventative strategies aimed at forestalling neurocognitive decline in this population.

  13. Ultra-wideband receiver

    DOEpatents

    McEwan, Thomas E.

    1996-01-01

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, .+-.UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals.

  14. Ultra-wideband receiver

    DOEpatents

    McEwan, Thomas E.

    1994-01-01

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, .+-.UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals.

  15. Ultra-wideband receiver

    DOEpatents

    McEwan, T.E.

    1996-06-04

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, {+-}UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 21 figs.

  16. Ultra-wideband receiver

    DOEpatents

    McEwan, T.E.

    1994-09-06

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, [+-] UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 16 figs.

  17. Central receiver technology

    SciTech Connect

    Holl, R.L. )

    1989-09-01

    The research and development described in this document was conducted within the US Department of Energy's (DOE) Solar Thermal Technology Program. The goal of this program is to advance the engineering and scientific understanding of solar thermal technology and to establish the technology base from which private industry can develop solar thermal power production options for introduction into the competitive energy market. This report describes central receiver technology: its accomplishments to date, its current technology status, and the efforts still necessary to fully exploit it.

  18. Weather Data Receiver

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Northern Video Graphics, Inc. developed a low-cost satellite receiving system for users such as independent meteorologists, agribusiness firms, small airports or flying clubs, marine vessels and small TV stations. Called Video Fax, it is designed for use with certain satellites; the GOES (Geostationary Operational Environmental Satellite) spacecraft operated by the National Oceanic and Atmospheric Administration, the European Space Agency's Meteosat and Japan's Geostationary Meteorological Satellite. By dictum of the World Meteorological Organization, signals from satellites are available to anyone without cost so the Video Fax user can acquire signals directly from the satellite and cut out the middle man, enabling savings. Unit sells for about one-fifth the cost of the equipment used by TV stations. It consists of a two-meter antenna; a receiver; a microprocessor-controlled display computer; and a video monitor. Computer stores data from the satellites and converts it to an image which is displayed on the monitor. Weather map can be preserved as signal data on tape, or it can be stored in a video cassette as a permanent image.

  19. Percentage of Adults Who Receive Colorectal Cancer Screening as Appropriate

    MedlinePlus

    ... Appropriate Percentage of Adults Who Receive Colorectal Cancer Screening as Appropriate Colorectal cancer is the second leading ... Percentage of Adults Who Receive Recommended Colorectal Cancer Screening by Age Group 78pm-ubty Download these data » ...

  20. Digital Receiver Phase Meter

    NASA Technical Reports Server (NTRS)

    Marcin, Martin; Abramovici, Alexander

    2008-01-01

    The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

  1. Solar thermal energy receiver

    NASA Technical Reports Server (NTRS)

    Baker, Karl W. (Inventor); Dustin, Miles O. (Inventor)

    1992-01-01

    A plurality of heat pipes in a shell receive concentrated solar energy and transfer the energy to a heat activated system. To provide for even distribution of the energy despite uneven impingement of solar energy on the heat pipes, absence of solar energy at times, or failure of one or more of the heat pipes, energy storage means are disposed on the heat pipes which extend through a heat pipe thermal coupling means into the heat activated device. To enhance energy transfer to the heat activated device, the heat pipe coupling cavity means may be provided with extensions into the device. For use with a Stirling engine having passages for working gas, heat transfer members may be positioned to contact the gas and the heat pipes. The shell may be divided into sections by transverse walls. To prevent cavity working fluid from collecting in the extensions, a porous body is positioned in the cavity.

  2. A 30 GHz monolithic receive module

    NASA Technical Reports Server (NTRS)

    Mondal, J.; Contolatis, T.; Geddes, J.; Bauhahn, P.; Sokolov, V.

    1990-01-01

    The technical achievements and deliveries made during the duration of the program to develop a 30 GHz monolithic receive module for communication feed array applications and to deliver submodules and 30 GHz monolithic receive modules for experimental evaluation are discussed. Key requirements include an overall receive module noise figure of 5 dB, a 30 dB RF-to-RF gain with six levels of intermediate gain control, a five bit phase shifter, and a maximum power consumption of 250 mW. In addition, the monolithic receive module design addresses a cost goal of less than one thousand dollars (1980 dollars) per module in unit buys of 5,000 or more, and a mechanical configuration that is applicable to a spaceborne phase array system. An additional task for the development and delivery of 32 GHz phase shifter integrated circuit (IC) for deep space communication is also described.

  3. Submillimeter-wave receivers - A status report

    NASA Technical Reports Server (NTRS)

    Wilson, W. J.

    1983-01-01

    A development status assessment is presented for the work of U.S. and Western European research groups on heterodyne sub-mm receivers in the 300-1000 GHz frequency range. The applications driving sub-mm receiver and local oscillator source technologies are radio astronomy, atmospheric measurements, plasma diagnostics, and laboratory spectroscopy. Progress is concentrated in two areas, cooled Schottky diode mixers and solid state local oscillators employing frequency multipliers.

  4. Computer-assisted assignment of functional domains in the nonstructural polyprotein of hepatitis E virus: delineation of an additional group of positive-strand RNA plant and animal viruses.

    PubMed

    Koonin, E V; Gorbalenya, A E; Purdy, M A; Rozanov, M N; Reyes, G R; Bradley, D W

    1992-09-01

    Computer-assisted comparison of the nonstructural polyprotein of hepatitis E virus (HEV) with proteins of other positive-strand RNA viruses allowed the identification of the following putative functional domains: (i) RNA-dependent RNA polymerase, (ii) RNA helicase, (iii) methyltransferase, (iv) a domain of unknown function ("X" domain) flanking the papain-like protease domains in the polyproteins of animal positive-strand RNA viruses, and (v) papain-like cysteine protease domain distantly related to the putative papain-like protease of rubella virus (RubV). Comparative analysis of the polymerase and helicase sequences of positive-strand RNA viruses belonging to the so-called "alpha-like" supergroup revealed grouping between HEV, RubV, and beet necrotic yellow vein virus (BNYVV), a plant furovirus. Two additional domains have been identified: one showed significant conservation between HEV, RubV, and BNYVV, and the other showed conservation specifically between HEV and RubV. The large nonstructural proteins of HEV, RubV, and BNYVV retained similar domain organization, with the exceptions of relocation of the putative protease domain in HEV as compared to RubV and the absence of the protease and X domains in BNYVV. These observations show that HEV, RubV, and BNYVV encompass partially conserved arrays of distinctive putative functional domains, suggesting that these viruses constitute a distinct monophyletic group within the alpha-like supergroup of positive-strand RNA viruses. PMID:1518855

  5. Synthesis of a stationary phase based on silica modified with branched octadecyl groups by Michael addition and photoinduced thiol-yne click chemistry for the separation of basic compounds.

    PubMed

    Huang, Guang; Ou, Junjie; Wang, Hongwei; Ji, Yongsheng; Wan, Hao; Zhang, Zhang; Peng, Xiaojun; Zou, Hanfa

    2016-04-01

    A novel silica-based stationary phase with branched octadecyl groups was prepared by the sequential employment of the Michael addition reaction and photoinduced thiol-yne click chemistry with 3-aminopropyl-functionalized silica microspheres as the initial material. The resulting stationary phase denoted as SiO2 -N(C18)4 was characterized by elemental analysis, FTIR spectroscopy and Raman spectroscopy, demonstrating the existence of branched octadecyl groups in silica microspheres. The separations of benzene homologous compounds, acid compounds and amine analogues were conducted, demonstrating mixed-mode separation mechanism on SiO2 -N(C18)4 . Baseline separation of basic drugs mixture was acquired with the mobile phase of acetonitrile/H2 O (5%, v/v). SiO2 -N(C18)4 was further applied to separate Corydalis yanhusuo Wang water extracts, and more baseline separation peaks were obtained for SiO2 -N(C18)4 than those on Atlantis dC18 column. It can be expected that this new silica-based stationary phase will exhibit great potential in the analysis of basic compounds. PMID:26910263

  6. Economic analysis of a phase III clinical trial evaluating the addition of total androgen suppression to radiation versus radiation alone for locally advanced prostate cancer (Radiation Therapy Oncology Group protocol 86-10)

    SciTech Connect

    Konski, Andre . E-mail: a_konski@fccc.edu; Sherman, Eric; Krahn, Murray; Bremner, Karen; Beck, J. Robert; Watkins-Bruner, Deborah; Pilepich, Michael

    2005-11-01

    Purpose: To evaluate the cost-effectiveness of adding hormone therapy to radiation for patients with locally advanced prostate cancer, using a Monte Carlo simulation of a Markov Model. Methods and Materials: Radiation Therapy Oncology Group (RTOG) protocol 86-10 randomized patients to receive radiation therapy (RT) alone or RT plus total androgen suppression (RTHormones) 2 months before and during RT for the treatment of locally advanced prostate cancer. A Markov model was designed with Data Pro (TreeAge Software, Williamstown, MA). The analysis took a payer's perspective. Transition probabilities from one state of health (i.e., with no disease progression or with hormone-responsive metastatic disease) to another were calculated from published rates pertaining to RTOG 86-10. Patients remained in one state of health for 1 year. Utility values for each health state and treatment were obtained from the literature. Distributions were sampled at random from the treatment utilities according to a second-order Monte Carlo simulation technique. Results: The mean expected cost for the RT-only treatments was $29,240 (range, $29,138-$29,403). The mean effectiveness for the RT-only treatment was 5.48 quality-adjusted life years (QALYs) (range, 5.47-5.50). The mean expected cost for RTHormones was $31,286 (range, $31,058-$31,555). The mean effectiveness was 6.43 QALYs (range, 6.42-6.44). Incremental cost-effectiveness analysis showed RTHormones to be within the range of cost-effectiveness at $2,153/QALY. Cost-effectiveness acceptability curve analysis resulted in a >80% probability that RTHormones is cost-effective. Conclusions: Our analysis shows that adding hormonal treatment to RT improves health outcomes at a cost that is within the acceptable cost-effectiveness range.

  7. Reconfigurable optical transmitters and receivers

    NASA Astrophysics Data System (ADS)

    Freude, Wolfgang; Schmogrow, René; Hillerkuss, David; Meyer, Joachim; Dreschmann, Michael; Nebendahl, Bernd; Huebner, Michael; Becker, Juergen; Koos, Christian; Leuthold, Juerg

    2012-01-01

    Recent advances in electronic data processing allow constructing reconfigurable optical transmitters and receivers, where modulation formats and symbol rates are set by software-controlled field programmable gate arrays (FPGA). We report on such a real-time optical transmitter for 8 modulation formats, which can be swapped in 5 ns without data loss. With single-polarization 64QAM symbols generated at 28 GBd, we transmit data at 168 Gbit/s in real time. A similar arrangement defines a single-polarization orthogonal frequency division multiplexing (OFDM) transmitter for a data rate of 101.5 Gbit/s, where 58 subcarriers are encoded with 16QAM data. With a different software setup, the FPGA realizes an optical 56 Gbit/s transmitter for sinc-shaped so-called Nyquist pulses, the spectrum of which is rectangular having the minimum theoretically achievable bandwidth (suitable for Nyquist wavelength division multiplexing, N-WDM). For terabit OFDM reception, optical pre-processing is required to demultiplex high-bitrate signals down to lower-bitrate tributaries, which then can be processed electronically. We discuss a 10.8 Tbit/s (26 Tbit/s) receiver employing an all-optical fast Fourier transform to demultiplex 75 (325) optical subcarriers modulated with 16QAM-formated symbols at a rate of 18 GBd (10 GBd). Groups with any number of subcarriers can be selected with a simple hardware reconfiguration step.

  8. An optimized model and test of the China's first high temperature parabolic trough solar receiver

    SciTech Connect

    Gong, Guangjie; Huang, Xinyan; Wang, Jun; Hao, Menglong

    2010-12-15

    The vacuum solar receiver is the key component of a parabolic trough solar plant, which plays a prominent role in the gross system efficiency. Recently, China's first high temperature vacuum receiver, Sanle-3 HCE, has been developed and produced by Southeast University and Sanle Electronic Group. Before being utilized in China's first parabolic trough solar plant, accurately estimating the thermal properties of this new receiver is important. This paper first establishes and optimizes a 1-D theoretical model at Matlab program to compute the receiver's major heat loss through glass envelope, and then systematically analyzes the major influence factors of heat loss. With the laboratorial steady state test stand, the heat losses of both good vacuum and non-vacuum Sanle-3 receivers were surveyed. Comparison shows the original 1-D model agrees with the ends covered test while remarkably deviating from end exposed test. For the purpose of identifying the influence of receiver's end to total heat loss, an additional 3-D model is built by CFD software to further investigate the different heat transfer processes of receiver's end components. The 3-D end model is verified by heating power and IR temperature distribution images in the test. Combining the optimized 1-D model with the new 3-D end model, the comparison with test data shows a good accordance. At the same time the heat loss curve and emittance curve of this new receiver are given and compared with those of several other existing receivers as references. (author)

  9. A Right to Be Heard: Learning from Learners with Additional Needs in Literacy

    ERIC Educational Resources Information Center

    McPhillips, Therese; Shevlin, Michael; Long, Louise

    2012-01-01

    This study aimed to explore the consultation experiences of pupils who have additional needs in literacy. An opportunistic sample of eight schools--four in Northern Ireland and four in the Republic of Ireland--were chosen by the researchers; selected pupils were receiving additional literacy support. Focus group discussions and arts-based creative…

  10. Lunar Receiving Laboratory Project History

    NASA Technical Reports Server (NTRS)

    Mangus, Susan; Larsen, William

    2004-01-01

    As early as 1959, the Working Group on Lunar Exploration within NASA advocated that 'one of the prime objectives of the first lunar landing mission should be the collection of samples for return to Earth, where they could be subjected to detailed study and analysis.' Within NASA, neither this group nor any other scientists working with the Agency were concerned about back contamination issues. Outside of NASA, back contamination concerns had been raised as early as 1960. Although NASA did not seem to pay any attention to the concerns at that time, the scientific community continued to be interested in the topic. In 1962 and again in 1963, as the Apollo Program loomed large, further discussions were held. These early discussions of back contamination did not make their way into NASA's administration, however, and when Manned Spacecraft Center personnel began to articulate early concepts for the Lunar Receiving Laboratory (LRL), the back contamination issue was not considered. Once this concern became a major focus, however, the LRL's development became increasingly complex. This is the history of that development.

  11. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  12. Real-time software receiver

    NASA Technical Reports Server (NTRS)

    Ledvina, Brent M. (Inventor); Psiaki, Mark L. (Inventor); Powell, Steven P. (Inventor); Kintner, Jr., Paul M. (Inventor)

    2007-01-01

    A real-time software receiver that executes on a general purpose processor. The software receiver includes data acquisition and correlator modules that perform, in place of hardware correlation, baseband mixing and PRN code correlation using bit-wise parallelism.

  13. Real-time software receiver

    NASA Technical Reports Server (NTRS)

    Ledvina, Brent M. (Inventor); Psiaki, Mark L. (Inventor); Powell, Steven P. (Inventor); Kintner, Jr., Paul M. (Inventor)

    2006-01-01

    A real-time software receiver that executes on a general purpose processor. The software receiver includes data acquisition and correlator modules that perform, in place of hardware correlation, baseband mixing and PRN code correlation using bit-wise parallelism.

  14. High temperature solar thermal receiver

    NASA Technical Reports Server (NTRS)

    1979-01-01

    A design concept for a high temperature solar thermal receiver to operate at 3 atmospheres pressure and 2500 F outlet was developed. The performance and complexity of windowed matrix, tube-header, and extended surface receivers were evaluated. The windowed matrix receiver proved to offer substantial cost and performance benefits. An efficient and cost effective hardware design was evaluated for a receiver which can be readily interfaced to fuel and chemical processes or to heat engines for power generation.

  15. High-temperature ceramic receivers

    SciTech Connect

    Jarvinen, P. O.

    1980-01-01

    An advanced ceramic dome cavity receiver is discussed which heats pressurized gas to temperatures above 1800/sup 0/F (1000/sup 0/C) for use in solar Brayton power systems of the dispersed receiver/dish or central receiver type. Optical, heat transfer, structural, and ceramic material design aspects of the receiver are reported and the development and experimental demonstration of a high-temperature seal between the pressurized gas and the high-temperature silicon carbide dome material is described.

  16. Processing In A GPS Receiver To Reduce Multipath Errors

    NASA Technical Reports Server (NTRS)

    Meehan, Thomas K.

    1994-01-01

    Four techniques of ancillary real-time digital processing of signals in Global Positioning System, GPS, receiver introduced reducing effects of multipath propagation of signals on position estimates produced by receiver. Multipath range errors halved. Applied in addition to other signal-processing techniques and to other techniques designing as receiving antenna to make it insensitive to reflections of GPS signals from nearby objects.

  17. The addition of rituximab to a combination of fludarabine, cyclophosphamide, mitoxantrone (FCM) significantly increases the response rate and prolongs survival as compared with FCM alone in patients with relapsed and refractory follicular and mantle cell lymphomas: results of a prospective randomized study of the German Low-Grade Lymphoma Study Group.

    PubMed

    Forstpointner, Roswitha; Dreyling, Martin; Repp, Roland; Hermann, Sandra; Hänel, Annette; Metzner, Bernd; Pott, Christiane; Hartmann, Frank; Rothmann, Frank; Rohrberg, Robert; Böck, Hans-Peter; Wandt, Hannes; Unterhalt, Michael; Hiddemann, Wolfgang

    2004-11-15

    In follicular lymphoma (FL) and mantle cell lymphoma (MCL) the monoclonal antibody rituximab may improve the prognosis when combined with chemotherapy. This was investigated in a prospective randomized study in patients with relapsed disease. A total of 147 patients were randomized to receive 4 courses of chemotherapy with 25 mg/m(2) fludarabine on days 1 to 3, 200 mg/m(2) cyclophosphamide on days 1 to 3, and 8 mg/m(2) mitoxantrone on day 1 (FCM), alone or combined with rituximab (375 mg/m(2); R-FCM). Of 128 evaluable patients, 62 were randomized for FCM and 66 for R-FCM. R-FCM revealed an overall response rate of 79% (33% complete remission [CR], 45% partial remission [PR]) as compared with 58% for FCM alone (13% CR, 45% PR; P = .01), with similar results in a subgroup analysis of FL (94% vs 70%) and MCL (58% vs 46%). In the total group, the R-FCM arm was significantly superior concerning progression-free survival (PFS; P = .0381) and overall survival (OS; P = .0030). In FL PFS was significantly longer in the R-FCM arm (P = .0139) whereas in MCL a significantly longer OS was observed (P = .0042). There were no differences in clinically relevant side effects in both study arms. Hence, the addition of rituximab to FCM chemotherapy significantly improves the outcome of relapsed or refractory FL and MCL.

  18. Bragg-cell receiver study

    NASA Technical Reports Server (NTRS)

    Wilson, Lonnie A.

    1987-01-01

    Bragg-cell receivers are employed in specialized Electronic Warfare (EW) applications for the measurement of frequency. Bragg-cell receiver characteristics are fully characterized for simple RF emitter signals. This receiver is early in its development cycle when compared to the IFM receiver. Functional mathematical models are derived and presented in this report for the Bragg-cell receiver. Theoretical analysis is presented and digital computer signal processing results are presented for the Bragg-cell receiver. Probability density function analysis are performed for output frequency. Probability density function distributions are observed to depart from assumed distributions for wideband and complex RF signals. This analysis is significant for high resolution and fine grain EW Bragg-cell receiver systems.

  19. Direct targeted glycation of the free sulfhydryl group of cysteine residue (Cys-34) of BSA. Mapping of the glycation sites of the anti-tumor Thomsen-Friedenreich neoglycoconjugate vaccine prepared by Michael addition reaction.

    PubMed

    Demian, Wael L L; Kottari, Naresh; Shiao, Tze Chieh; Randell, Edward; Roy, René; Banoub, Joseph H

    2014-12-01

    We present in this manuscript the characterization of the exact glycation sites of the Thomsen-Friedenreich antigen-BSA vaccine (TF antigen:BSA) prepared using a Michael addition reaction between the saccharide antigen as an electrophilic acceptor and the nucleophilic thiol and L-Lysine ε-amino groups of BSA using different ligation conditions. Matrix laser desorption ionization time-of-flight mass spectrometry of the neoglycoconjugates prepared with TF antigen:protein ratios of 2:1 and 8:1, allowed to observe, respectively, the protonated molecules for each neoglycoconjugates: [M + H](+) at m/z 67,599 and 70,905. The measurements of these molecular weights allowed us to confirm exactly the carbohydrate:protein ratios of these two synthetic vaccines. These were found to be closely formed by a TF antigen:BSA ratios of 2:1 and 8:1, respectively. Trypsin digestion and liquid chromatography coupled with electrospray ionization mass spectrometry allowed us to identify the series of released glycopeptide and peptide fragments. De novo sequencing affected by low-energy collision dissociation tandem mass spectrometry was then employed to unravel the precise glycation sites of these neoglycoconjugate vaccines. Finally, we identified, respectively, three diagnostic and characteristic glycated peptides for the synthetic glycoconjugate possessing a TF antigen:BSA ratio 2:1, whereas we have identified for the synthetic glycoconjugate having a TF:BSA ratio 8:1 a series of 14 glycated peptides. The net increase in the occupancy sites of these neoglycoconjugates was caused by the large number of glycoforms produced during the chemical ligation of the synthetic carbohydrate antigen onto the protein carrier.

  20. Direct targeted glycation of the free sulfhydryl group of cysteine residue (Cys-34) of BSA. Mapping of the glycation sites of the anti-tumor Thomsen-Friedenreich neoglycoconjugate vaccine prepared by Michael addition reaction.

    PubMed

    Demian, Wael L L; Kottari, Naresh; Shiao, Tze Chieh; Randell, Edward; Roy, René; Banoub, Joseph H

    2014-12-01

    We present in this manuscript the characterization of the exact glycation sites of the Thomsen-Friedenreich antigen-BSA vaccine (TF antigen:BSA) prepared using a Michael addition reaction between the saccharide antigen as an electrophilic acceptor and the nucleophilic thiol and L-Lysine ε-amino groups of BSA using different ligation conditions. Matrix laser desorption ionization time-of-flight mass spectrometry of the neoglycoconjugates prepared with TF antigen:protein ratios of 2:1 and 8:1, allowed to observe, respectively, the protonated molecules for each neoglycoconjugates: [M + H](+) at m/z 67,599 and 70,905. The measurements of these molecular weights allowed us to confirm exactly the carbohydrate:protein ratios of these two synthetic vaccines. These were found to be closely formed by a TF antigen:BSA ratios of 2:1 and 8:1, respectively. Trypsin digestion and liquid chromatography coupled with electrospray ionization mass spectrometry allowed us to identify the series of released glycopeptide and peptide fragments. De novo sequencing affected by low-energy collision dissociation tandem mass spectrometry was then employed to unravel the precise glycation sites of these neoglycoconjugate vaccines. Finally, we identified, respectively, three diagnostic and characteristic glycated peptides for the synthetic glycoconjugate possessing a TF antigen:BSA ratio 2:1, whereas we have identified for the synthetic glycoconjugate having a TF:BSA ratio 8:1 a series of 14 glycated peptides. The net increase in the occupancy sites of these neoglycoconjugates was caused by the large number of glycoforms produced during the chemical ligation of the synthetic carbohydrate antigen onto the protein carrier. PMID:25476939

  1. Modification of Hewlett-Packard Chemstation (G1034C version C.02.00 and G1701AA version C.02.00 and C.03.00) data analysis program for addition of automatic extracted ion chromatographic groups.

    PubMed

    Amick, G D

    1998-01-01

    A modification to data analysis macros to create "ion groups" and add a menu item to the data analysis menu bar is described. These "ion groups" consist of up to 10 ions for extracted ion chromatographs. The present manuscript describes modifications to yield a drop down menu in data analysis that contains user-defined names of groups (e.g., opiates, barbiturates, benzodiazepines) of ions that, when selected, will automatically perform extracted ion chromatographs with up to 10 ions in that group for the loaded datafile.

  2. Low cost omega navigation receiver

    NASA Technical Reports Server (NTRS)

    Lilley, R. W.

    1974-01-01

    The development of a low cost Omega navigation receiver is discussed. Emphasis is placed on the completion and testing of a modular, multipurpose Omega receiver which utilizes a digital memory-aided, phase-locked loop to provide phase measurement data to a variety of applications interfaces. The functional units contained in the prototype device are described. The receiver is capable of receiving and storing phase measurements for up to eight Omega signals and computes two switch-selectable lines of position, displaying this navigation data in chart-recorded form.

  3. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  4. Receiver design and performance characteristics

    NASA Technical Reports Server (NTRS)

    Simon, M. K.; Yuen, J. H.

    1982-01-01

    The basic design, principles of operation, and characteristics of deep space communications receivers are examined. In particular, the basic fundamentals of phase-locked loop and Costas loop receivers used for synchronization, tracking, and demodulation of phase-coherent signals in residual carrier and suppressed carrier systems are addressed.

  5. Receiver design and performance characteristics

    NASA Astrophysics Data System (ADS)

    Simon, M. K.; Yuen, J. H.

    1982-07-01

    The basic design, principles of operation, and characteristics of deep space communications receivers are examined. In particular, the basic fundamentals of phase-locked loop and Costas loop receivers used for synchronization, tracking, and demodulation of phase-coherent signals in residual carrier and suppressed carrier systems are addressed.

  6. UWB delay and multiply receiver

    DOEpatents

    Dallum, Gregory E.; Pratt, Garth C.; Haugen, Peter C.; Romero, Carlos E.

    2013-09-10

    An ultra-wideband (UWB) delay and multiply receiver is formed of a receive antenna; a variable gain attenuator connected to the receive antenna; a signal splitter connected to the variable gain attenuator; a multiplier having one input connected to an undelayed signal from the signal splitter and another input connected to a delayed signal from the signal splitter, the delay between the splitter signals being equal to the spacing between pulses from a transmitter whose pulses are being received by the receive antenna; a peak detection circuit connected to the output of the multiplier and connected to the variable gain attenuator to control the variable gain attenuator to maintain a constant amplitude output from the multiplier; and a digital output circuit connected to the output of the multiplier.

  7. Noise Stability of SIS Receivers

    NASA Astrophysics Data System (ADS)

    Kooi, J. W.; Chattopadhyay, G.; Thielman, M.; Phillips, T. G.; Schieder, R.

    2000-05-01

    There is a strong interest in the submillimeter astronomy community to increase the IF bandwidth of SIS receivers in order to better facilitate broad spectral linewidth and continuum observations of extragalactic sources. However, with an increase in receiver IF bandwidth there is a decrease in the mixer stability. This in turn effects the integration efficiency and quality of the measurement. In order to better understand the noise mechanisms responsible for reducing the receiver stability, we employed a technique first described by D.W. Allan and later elaborated upon by Schieder et al. In this paper we address a variety of factors that degrade the noise stability of SIS receivers. The goal of this exercise is to make recommendations aimed at maximizing SIS receiver stability.

  8. Dish/stirling hybrid-receiver

    DOEpatents

    Mehos, Mark S.; Anselmo, Kenneth M.; Moreno, James B.; Andraka, Charles E.; Rawlinson, K. Scott; Corey, John; Bohn, Mark S.

    2002-01-01

    A hybrid high-temperature solar receiver is provided which comprises a solar heat-pipe-receiver including a front dome having a solar absorber surface for receiving concentrated solar energy, a heat pipe wick, a rear dome, a sidewall joining the front and the rear dome, and a vapor and a return liquid tube connecting to an engine, and a fossil fuel fired combustion system in radial integration with the sidewall for simultaneous operation with the solar heat pipe receiver, the combustion system comprising an air and fuel pre-mixer, an outer cooling jacket for tangentially introducing and cooling the mixture, a recuperator for preheating the mixture, a burner plenum having an inner and an outer wall, a porous cylindrical metal matrix burner firing radially inward facing a sodium vapor sink, the mixture ignited downstream of the matrix forming combustion products, an exhaust plenum, a fossil-fuel heat-input surface having an outer surface covered with a pin-fin array, the combustion products flowing through the array to give up additional heat to the receiver, and an inner surface covered with an extension of the heat-pipe wick, a pin-fin shroud sealed to the burner and exhaust plenums, an end seal, a flue-gas diversion tube and a flue-gas valve for use at off-design conditions to limit the temperature of the pre-heated air and fuel mixture, preventing pre-ignition.

  9. Receiver functions: An exploration seismic perspective

    NASA Astrophysics Data System (ADS)

    van Manen, Dirk-Jan; Curtis, Andrew; Robertsson, Johan

    2015-04-01

    The receiver function technique is arguably the most successful technique in seismology for crustal and upper mantle characterisation. Prompted by the successful application of the receiver function method to multi-component seabed seismic data to derive shear-wave statics, we explore to what extent the receiver function method can be used for general multi-component reflection seismic data processing and vice-versa. We show that the work in the seismological community on moveout correction and stacking of receiver functions can be extended significantly, building on results from the exploration seismic community. We introduce a novel type of space-time domain receiver function, computed by 2D deconvolution, which treats the spatial aspects of mode-conversion completely analogously to the temporal aspects. Thus, the receiver function becomes a two-dimensional transfer function, which shows how far the P-waves have to be shifted in space and delayed in time to match the corresponding PS-converted waves. In addition, series expansions of the traveltime differences lead naturally to two-term moveout approximations and Dix-Krey-type velocity inversion formulae for both the conventional (i.e., time difference as a function of slowness) as well as novel (i.e., time difference as a function of offset) receiver functions. The two approaches, and the required data pre-processing, are illustrated using synthetic multi-component seismic data. We also introduce a model-independent method for reflection receiver function computation, based on stationary phase analysis, which can be used for deconvolution of anelastic and all other propagation effects. This method is inspired by, and closely related to, interferometry and relies on matching the slowness of a particular PP-reflected wave to the slowness of the corresponding PS-converted wave on the source side, and exploiting the fact that the traveltime difference is stationary for the PP- and PS-wave that is reflected and mode

  10. Customizable Digital Receivers for Radar

    NASA Technical Reports Server (NTRS)

    Moller, Delwyn; Heavey, Brandon; Sadowy, Gregory

    2008-01-01

    Compact, highly customizable digital receivers are being developed for the system described in 'Radar Interferometer for Topographic Mapping of Glaciers and Ice Sheets' (NPO-43962), NASA Tech Briefs, Vol. 31, No. 7 (August 2007), page 72. The receivers are required to operate in unison, sampling radar returns received by the antenna elements in a digital beam-forming (DBF) mode. The design of these receivers could also be adapted to commercial radar systems. At the time of reporting the information for this article, there were no commercially available digital receivers capable of satisfying all of the operational requirements and compact enough to be mounted directly on the antenna elements. A provided figure depicts the overall system of which the digital receivers are parts. Each digital receiver includes an analog-to-digital converter (ADC), a demultiplexer (DMUX), and a field-programmable gate array (FPGA). The ADC effects 10-bit band-pass sampling of input signals having frequencies up to 3.5 GHz. The input samples are demultiplexed at a user-selectable rate of 1:2 or 1:4, then buffered in part of the FPGA that functions as a first-in/first-out (FIFO) memory. Another part of the FPGA serves as a controller for the ADC, DMUX, and FIFO memory and as an interface between (1) the rest of the receiver and (2) a front-panel data port (FPDP) bus, which is an industry-standard parallel data bus that has a high data-rate capability and multichannel configuration suitable for DBF. Still other parts of the FPGA in each receiver perform signal-processing functions. The digital receivers can be configured to operate in a stand-alone mode, or in a multichannel mode as needed for DBF. The customizability of the receiver makes it applicable to a broad range of system architectures. The capability for operation of receivers in either a stand-alone or a DBF mode enables the use of the receivers in an unprecedentedly wide variety of radar systems.

  11. "Directed" assembly of metallacalix[n]arenes with pyrimidine nucleobase ligands of low symmetry: interchanging metals in mixed-metal metallacalix[4]arenes and incorporating additional metals at the exocyclic groups.

    PubMed

    Khutia, Anupam; Sanz Miguel, Pablo J; Lippert, Bernhard

    2011-04-01

    The pyrimidine (pym) nucleobase cytosine (H(2)C) forms cyclic ring structures ("metallacalix[n]arenes") when treated with square-planar cis-a(2)M(II) entities (M=Pt, Pd; a=NH(3) or a(2)=diamine). The number of possible linkage isomers for a given n and the number of possible rotamers can be substantially reduced if a "directed" approach is pursued. Hence, two cytosine ligands are bonded in a defined way to a kinetically robust platinum corner stone. In the accompanying paper (Part I: A. Khutia, P. J. Sanz Miguel, B. Lippert, Chem. Eur. J. 2010, 17, DOI: 10.1002/chem.2010002722) we have demonstrated this principle by allowing cis-[Pta(2)(H(2)C-N3)(2)](2+) to react with (en)Pd(II) to give cycles of (N1,N3⋅N3,N1▪)(x) (with x=2 or 3; ⋅ represents Pt(II) and ▪ represents Pd(II)). In an extension of this work we have now prepared cis-[Pta(2)(HC-N1)(2)] (1; HC=monoanion of cytosine) and treated it with (bpy)Pd(II) (bpy=2,2'-bipyridine) to give the Pt(2) Pd(2) cycle cis-[{Pt(NH(3))(2)(N1-HC-N3)(2)Pd(bpy)}(2)](NO(3))(4) ⋅13H(2)O (5) with the coordination sites of the metals inverted; hence, platinum is bonded to N1 and palladium is bonded to N3 sites. Again, not only the expected single linkage isomer is formed, but at the same time the solid-state structure and (1)H NMR spectroscopy reveal the preferential occurrence of a single rotamer (1,3-alternate). The addition of (bpy)Pd(II) to 5 led to the formation of Pd(6) Pt(2) complex 6 in which the exocyclic N4H(2) groups of the cytosine ligands have undergone deprotonation and chelate four more (bpy)Pd(II) entities through the O2 and N4H sites. With a large excess of (bpy)Pd(II) over 5 (4:1), cis-(NH(3))(2) Pt(II) is eventually substituted by (bpy)Pd(II) to give the Pd(8) complex 7. In both 6 and 7 stacks of three (bpy)Pd(II) entities occur. The linkage isomer of 5,cis-[{Pt(NH(3))(2)(N3-HC-N1)(2)Pd(bpy)}(2)](NO(3))(4) ⋅9H(2)O (8), has been structurally characterized and the two complexes compared. The acid

  12. Herbal formulations as feed additives in the course of rabbit subclinical coccidiosis.

    PubMed

    Nosal, Paweł; Kowalska, Dorota; Bielański, Paweł; Kowal, Jerzy; Kornaś, Sławomir

    2014-01-01

    Two simultaneous experiments were carried out in a breeding farm of New Zealand White rabbits (Oryctolagus cuniculus f. domesticus) to determine the feasibility of replacing coccidiostats with garlic and oregano preparation. The research took place during June and July, the period of the greatest threat of coccidiosis caused by Eimeria spp. (Apicomplexa: Eimeriidae). In one investigation, 40 rabbits aged 1-3 months were divided into four groups of ten animals: Group A being a control which received no coccidiostats in feed, Group B receiving the coccidiostat Baycox in water once at weaning, Group C receiving the coccidiostat robenidine in feed, and group D receiving herbal extracts in feed. In the second trial, six mated females were allocated equally to three groups analogous to A, C, and D above during pregnancy and lactation. Bulk stool samples were collected from each group of rabbits at weekly intervals for coproscopic analysis, and the production results of the animals were recorded. In the young rabbits, both the faecal coccidia oocyst counts and body weight gains were more favourable in group D than the remaining groups. Also, the female rabbits of group D were the least infected. The results demonstrate that garlic and oregano feed additives exert a positive influence on the level and course of coccidia infection, with regard to maintaining a good level of animal productivity, and these herbal extracts appear to have potential value in coccidiosis prophylaxy. PMID:24930248

  13. Sensitivity of terahertz photonic receivers

    NASA Astrophysics Data System (ADS)

    Matsko, A. B.; Strekalov, D. V.; Yu, N.

    2008-04-01

    We theoretically discuss sensitivity limitations of a THz receiver which is based on up-conversion of the THz radiation into optical domain using high quality factor crystalline whispering gallery mode resonators. We show that the sensitivity of the receiver operating in the nonlinear regime approaches the sensitivity of an ideal THz photon counter. Thermal noise of the counter can be substantially reduced because of transparency of the nonlinear material in the THz frequency range. We also show that the density of power fluctuations of the receiver operating in the linear regime is given by the THz shot noise.

  14. Sarks as additional fermions

    NASA Astrophysics Data System (ADS)

    Agrawal, Jyoti; Frampton, Paul H.; Jack Ng, Y.; Nishino, Hitoshi; Yasuda, Osamu

    1991-03-01

    An extension of the standard model is proposed. The gauge group is SU(2) X ⊗ SU(3) C ⊗ SU(2) S ⊗ U(1) Q, where all gauge symmetries are unbroken. The colour and electric charge are combined with SU(2) S which becomes strongly coupled at approximately 500 GeV and binds preons to form fermionic and vector bound states. The usual quarks and leptons are singlets under SU(2) X but additional fermions, called sarks. transform under it and the electroweak group. The present model explains why no more than three light quark-lepton families can exist. Neutral sark baryons, called narks, are candidates for the cosmological dark matter having the characteristics designed for WIMPS. Further phenomenological implications of sarks are analyzed i including electron-positron annihilation. Z 0 decay, flavor-changing neutral currents. baryon-number non-conservation, sarkonium and the neutron electric dipole moment.

  15. Coe Receives 2007 Gilbert Award

    NASA Astrophysics Data System (ADS)

    Bogue, Scott W.; Coe, Robert S.

    2008-05-01

    Robert S. Coe received the 2007 William Gilbert Award at the 2007 AGU Fall Meeting in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  16. Stevenson received the Whipple award

    NASA Astrophysics Data System (ADS)

    Shoemaker, Eugene M.; Stevenson, David J.

    1996-02-01

    David J. Stevenson received the Whipple Award at the 1994 Spring Meeting in Baltimore. The award is given for outstanding scientific contributions to the field of planetology. The citation and Stevenson's response are given here.

  17. Streak camera receiver definition study

    NASA Technical Reports Server (NTRS)

    Johnson, C. B.; Hunkler, L. T., Sr.; Letzring, S. A.; Jaanimagi, P.

    1990-01-01

    Detailed streak camera definition studies were made as a first step toward full flight qualification of a dual channel picosecond resolution streak camera receiver for the Geoscience Laser Altimeter and Ranging System (GLRS). The streak camera receiver requirements are discussed as they pertain specifically to the GLRS system, and estimates of the characteristics of the streak camera are given, based upon existing and near-term technological capabilities. Important problem areas are highlighted, and possible corresponding solutions are discussed.

  18. Solar dynamic heat receiver technology

    NASA Technical Reports Server (NTRS)

    Sedgwick, Leigh M.

    1991-01-01

    A full-size, solar dynamic heat receiver was designed to meet the requirements specified for electrical power modules on the U.S. Space Station, Freedom. The heat receiver supplies thermal energy to power a heat engine in a closed Brayton cycle using a mixture of helium-xenon gas as the working fluid. The electrical power output of the engine, 25 kW, requires a 100 kW thermal input throughout a 90 minute orbit, including when the spacecraft is eclipsed for up to 36 minutes from the sun. The heat receiver employs an integral thermal energy storage system utilizing the latent heat available through the phase change of a high-temperature salt mixture. A near eutectic mixture of lithium fluoride and calcium difluoride is used as the phase change material. The salt is contained within a felt metal matrix which enhances heat transfer and controls the salt void distribution during solidification. Fabrication of the receiver is complete and it was delivered to NASA for verification testing in a simulated low-Earth-orbit environment. This document reviews the receiver design and describes its fabrication history. The major elements required to operate the receiver during testing are also described.

  19. A GPS Receiver for Lunar Missions

    NASA Technical Reports Server (NTRS)

    Bamford, William A.; Heckler, Gregory W.; Holt, Greg N.; Moreau, Michael C.

    2008-01-01

    Beginning with the launch of the Lunar Reconnaissance Orbiter (LRO) in October of 2008, NASA will once again begin its quest to land humans on the Moon. This effort will require the development of new spacecraft which will safely transport people from the Earth to the Moon and back again, as well as robotic probes tagged with science, re-supply, and communication duties. In addition to the next-generation spacecraft currently under construction, including the Orion capsule, NASA is also investigating and developing cutting edge navigation sensors which will allow for autonomous state estimation in low Earth orbit (LEO) and cislunar space. Such instruments could provide an extra layer of redundancy in avionics systems and reduce the reliance on support and on the Deep Space Network (DSN). One such sensor is the weak-signal Global Positioning System (GPS) receiver "Navigator" being developed at NASA's Goddard Space Flight Center (GSFC). At the heart of the Navigator is a Field Programmable Gate Array (FPGA) based acquisition engine. This engine allows for the rapid acquisition/reacquisition of strong GPS signals, enabling the receiver to quickly recover from outages due to blocked satellites or atmospheric entry. Additionally, the acquisition algorithm provides significantly lower sensitivities than a conventional space-based GPS receiver, permitting it to acquire satellites well above the GPS constellation. This paper assesses the performance of the Navigator receiver based upon three of the major flight regimes of a manned lunar mission: Earth ascent, cislunar navigation, and entry. Representative trajectories for each of these segments were provided by NASA. The Navigator receiver was connected to a Spirent GPS signal generator, to allow for the collection of real-time, hardware-in-the-loop results for each phase of the flight. For each of the flight segments, the Navigator was tested on its ability to acquire and track GPS satellites under the dynamical

  20. The Effects of Self-Confrontation via TV and of Additional Training Components: Group Discussion, Discrimination Training, and Practice in a Scaled-Down Situation on the Indirectness of Teacher Trainees.

    ERIC Educational Resources Information Center

    Klinzing, Hans Gerhard; Klinzing-Eurich, Gisela

    Four experimental studies were conducted to assess the differences in effectiveness of self-confrontation via TV when used exclusively and in combination with group discussion, discrimination training (training in the use of interaction analysis), and practice in a scaled-down situation (peerteaching) on "the indirectness" of future secondary…

  1. PiVoT GPS Receiver

    NASA Technical Reports Server (NTRS)

    Wennersten, Miriam Dvorak; Banes, Anthony Vince; Boegner, Gregory J.; Dougherty, Lamar; Edwards, Bernard L.; Roman, Joseph; Bauer, Frank H. (Technical Monitor)

    2001-01-01

    NASA Goddard Space Flight Center has built an open architecture, 24 channel space flight GPS receiver. The CompactPCI PiVoT GPS receiver card is based on the Mitel/GEC Plessey Builder-2 board. PiVoT uses two Plessey 2021 correlators to allow tracking of up to 24 separate GPS SV's on unique channels. Its four front ends can support four independent antennas, making it a useful card for hosting GPS attitude determination algorithms. It has been built using space quality, radiation tolerant parts. The PiVoT card will track a weaker signal than the original Builder 2 board. It also hosts an improved clock oscillator. The PiVoT software is based on the original Plessey Builder 2 software ported to the Linux operating system. The software is POSIX complaint and can easily be converted to other POSIX operating systems. The software is open source to anyone with a licensing agreement with Plessey. Additional tasks can be added to the software to support GPS science experiments or attitude determination algorithms. The next generation PiVoT receiver will be a single radiation hardened CompactPCI card containing the microprocessor and the GPS receiver optimized for use above the GPS constellation. PiVoT was flown successfully on a balloon in July, 2001, for its first non-simulated flight.

  2. UWB communication receiver feedback loop

    DOEpatents

    Spiridon, Alex; Benzel, Dave; Dowla, Farid U.; Nekoogar, Faranak; Rosenbury, Erwin T.

    2007-12-04

    A novel technique and structure that maximizes the extraction of information from reference pulses for UWB-TR receivers is introduced. The scheme efficiently processes an incoming signal to suppress different types of UWB as well as non-UWB interference prior to signal detection. Such a method and system adds a feedback loop mechanism to enhance the signal-to-noise ratio of reference pulses in a conventional TR receiver. Moreover, sampling the second order statistical function such as, for example, the autocorrelation function (ACF) of the received signal and matching it to the ACF samples of the original pulses for each transmitted bit provides a more robust UWB communications method and system in the presence of channel distortions.

  3. Central solar-energy receiver

    DOEpatents

    Not Available

    1981-10-27

    An improved tower-mounted central solar energy receiver for heating air drawn through the receiver by an induced draft fan is described. A number of vertically oriented, energy absorbing, fin-shaped slats are radially arranged in a number of concentric cylindrical arrays on top of the tower coaxially surrounding a pipe having air holes through which the fan draws air which is heated by the slats which receive the solar radiation from a heliostat field. A number of vertically oriented and wedge-shaped columns are radially arranged in a number of concentric cylindrical clusters surrounding the slat arrays. The columns have two mirror-reflecting sides to reflect radiation into the slat arrays and one energy absorbing side to reduce reradiation and reflection from the slat arrays.

  4. 7 CFR 1944.545 - Additional grants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 13 2013-01-01 2013-01-01 false Additional grants. 1944.545 Section 1944.545...) PROGRAM REGULATIONS (CONTINUED) HOUSING Technical and Supervisory Assistance Grants § 1944.545 Additional grants. An additional grant may be made to an applicant that has previously received a TSA grant and...

  5. 7 CFR 1944.545 - Additional grants.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 13 2011-01-01 2009-01-01 true Additional grants. 1944.545 Section 1944.545...) PROGRAM REGULATIONS (CONTINUED) HOUSING Technical and Supervisory Assistance Grants § 1944.545 Additional grants. An additional grant may be made to an applicant that has previously received a TSA grant and...

  6. Organic Rankine cycle receiver development

    NASA Technical Reports Server (NTRS)

    Haskins, H. J.

    1981-01-01

    The selected receiver concept is a direct-heated, once-through, monotube boiler operated at supercritical pressure. The cavity is formed by a cylindrical copper shell and backwall, with stainless steel tubing brazed to the outside surface. This core is surrounded by lightweight refractory insulation, load-bearing struts, and an outer case. The aperture plate is made of copper to provide long life by conduction and reradiation of heat away from the aperture lip. The receiver thermal efficiency is estimated to be 97 percent at rated conditions (energy transferred to toluene divided by energy incident on aperture opening). Development of the core manufacturing and corrosion protection methods is complete.

  7. The GBT 4mm Receiver

    NASA Astrophysics Data System (ADS)

    Frayer, David T.; White, S.; Watts, G.; Stennes, M.; Maddalena, R. J.; Simon, R.; Pospieszalski, M.; Bryerton, E.

    2013-01-01

    The new 4mm receiver (67--93 GHz) for the Robert C. Byrd Green Bank Telescope (GBT) was built to take advantage of the improved surface accuracy of the dish. The low frequency end of the 3mm atmospheric window is not available with ALMA (<84 GHz), and the sensitivity of the GBT is better than any other facility within this band. We discuss the design and performance of this new receiver for the GBT, and highlight the science opportunities available with the instrument. The National Radio Astronomy Observatory is a facility of the National Science Foundation operated under cooperative agreement by Associated Universities, Inc.

  8. Hyperammonemia in neonates receiving intravenous nutrition.

    PubMed

    Thomas, D W; Sinatra, F R; Hack, S L; Smith, T M; Platzker, A C; Merritt, R J

    1982-01-01

    Inadequate arginine intake has been suggested as an etiology for hyperammonemia in neonates on parenteral nutrition. We randomized 26 nonasphyxiated neonates to receive amino acid solutions containing either 3.6 or 10.4% of total nitrogen as arginine when intravenous nutrition (IVN) therapy was initiated. Neonates in both amino acid solution study groups were observed to have significantly elevated blood ammonia (BA) concentrations during IVN (p less than 0.01) as compared to pre-IVN levels. Blood ammonia concentrations tended to be higher in infants receiving the 3.6% arginine amino acid solution. Septic infants were at particular risk for hyperammonemia as compared to nonseptic patients (p less than 0.025). Other clinical parameters including birth weight, gestational age, oxygen requirements, enteral nutritional intake, congenital anomalies, and heart disease did not appear to be related to BA concentration.

  9. Screen-printed flexible MRI receive coils

    NASA Astrophysics Data System (ADS)

    Corea, Joseph R.; Flynn, Anita M.; Lechêne, Balthazar; Scott, Greig; Reed, Galen D.; Shin, Peter J.; Lustig, Michael; Arias, Ana C.

    2016-03-01

    Magnetic resonance imaging is an inherently signal-to-noise-starved technique that limits the spatial resolution, diagnostic image quality and results in typically long acquisition times that are prone to motion artefacts. This limitation is exacerbated when receive coils have poor fit due to lack of flexibility or need for padding for patient comfort. Here, we report a new approach that uses printing for fabricating receive coils. Our approach enables highly flexible, extremely lightweight conforming devices. We show that these devices exhibit similar to higher signal-to-noise ratio than conventional ones, in clinical scenarios when coils could be displaced more than 18 mm away from the body. In addition, we provide detailed material properties and components performance analysis. Prototype arrays are incorporated within infant blankets for in vivo studies. This work presents the first fully functional, printed coils for 1.5- and 3-T clinical scanners.

  10. Screen-printed flexible MRI receive coils.

    PubMed

    Corea, Joseph R; Flynn, Anita M; Lechêne, Balthazar; Scott, Greig; Reed, Galen D; Shin, Peter J; Lustig, Michael; Arias, Ana C

    2016-01-01

    Magnetic resonance imaging is an inherently signal-to-noise-starved technique that limits the spatial resolution, diagnostic image quality and results in typically long acquisition times that are prone to motion artefacts. This limitation is exacerbated when receive coils have poor fit due to lack of flexibility or need for padding for patient comfort. Here, we report a new approach that uses printing for fabricating receive coils. Our approach enables highly flexible, extremely lightweight conforming devices. We show that these devices exhibit similar to higher signal-to-noise ratio than conventional ones, in clinical scenarios when coils could be displaced more than 18 mm away from the body. In addition, we provide detailed material properties and components performance analysis. Prototype arrays are incorporated within infant blankets for in vivo studies. This work presents the first fully functional, printed coils for 1.5- and 3-T clinical scanners. PMID:26961073

  11. External ground monitoring v. receiver monitoring

    NASA Astrophysics Data System (ADS)

    Johannessen, R.

    1991-01-01

    The high levels of integrity required by civil aviation in the use of satellite navigation entails that satellite warning messages be augmented by some secondary form of monitoring. The alternatives presently considered are (1) ground monitoring, in which a monitor at some fixed and surveyed ground location broadcasts a warning to the navigating aircraft when there is a malfunction; and (2) 'receiver autonomous integrity monitoring' (RAIM), in which the navigating receiver conducts its own internal monitoring. While the former can be achieved with fewer navigation satellites, RAIM has the singular advantage of requiring no additional investment for a ground-monitoring system. The present evaluation of the alternatives discusses the factors of satellite visibility, the definition of 'good' geometry, and the duration of integrity outages and their significance.

  12. Second-generation central receiver technology comparison

    NASA Astrophysics Data System (ADS)

    Klimas, P. C.; Becker, M.

    Fifteen years of solar thermal technology development have produced a considerable amount of knowledge relating to the production of electricity from central receiver power plants. This body of knowledge is under examination by researchers from the United States and the Federal Republic of Germany for the purpose of defining the next generation central receiver electricity producers. This second generation power plant is expected to represent a significant step towards commercialization of these systems. During the course of the study, specific activities needed to realize this next-step technology are being defined. The study is an international team effort. Under the International Energy Agency Small Solar Power Systems project, researchers from DLR, Interatom, Sandia National Laboratories, and Bechtel have designed a study in which technologies relating to existing systems are quantified, logical next-step systems are characterized, and future potential advances are identified. The receiver concepts under investigation are: salt-in-tube, volumetric, and direct absorption. Two plant performance levels are examined, 30 and 100 MW(sub e). Each concept is applied with common capacity factors, solar multiples, and types and sizes of heliostats at each performance level. Availability and uncertainty analyses are also performed. Annual energy production figures are calculated using the SOLERGY computer code. Capital and Operation and Maintenance cost methodologies are mutually agreed upon in order that levelized energy cost calculations will be consistent for each power plant. During the course of this effort, further potential advances in central receiver technology have continued to become apparent. These possible areas for improvement will be described. An additional comparison is being made between central receivers and trough-based systems.

  13. Uncooled receivers for CO2 laser radiation

    NASA Astrophysics Data System (ADS)

    Granovskii, A. B.; Iakovlev, V. A.

    1986-01-01

    Published data on low-inertia, uncooled, single-element and matrix-type radiation receivers that have a high degree of reliability and are immune from interference from various external sources are systematically summarized. Three basic types of receivers are examined: photonic receivers, thermal receivers, and receivers based on wave interaction. Principal attention is given to the CO2 laser radiation receiver.

  14. STAR: SOFIA terahertz array receiver

    NASA Astrophysics Data System (ADS)

    Graf, Urs U.; Heyminck, Stefan; Rabanus, D.; Jacobs, Karl; Schieder, Rudolf T.; Stutzki, Juergen

    2003-02-01

    We present the concept for KOSMA's 16 element 1.9 THz heterodyne array STAR (SOFIA Terahertz Array Receiver) which is being developed for SOFIA. The instrument will consist of two interleaved sub-arrays of 8 pixels each. Together we will have a 4 × 4 pixel array with a beam spacing on the sky of approximately 1.5 times the beam size of 15 arcsec (FWHM). The receiver is mainly targeted at measuring the fine structure transition of ionized atomic carbon at 1.9 THz (158 microns). STAR's optics setup is modeled after the successful design used in KOSMA's SMART receiver. It will contain a K-mirror type beam rotator, a Martin-Puplett diplexer for LO coupling and an LO multiplexer using imaging Fourier gratings. Complete optical sub-assemblies will be machined monolithically as integrated optics units, to reduce the need for optical alignment. STAR will probably use waveguide mixers with diffusion cooled hot electron bolometers, which are being developed at KOSMA. The receiver backends will be KOSMA Array-AOSs. Local oscillator power will be provided by a backward wave oscillator (BWO), followed by a frequency tripler.

  15. Advances in SIS receiver technology

    NASA Technical Reports Server (NTRS)

    Frerking, M. A.

    1988-01-01

    Significant advances in SIS receiver technology since the last Asilomar meeting include: superconductor materials, integrated inductive tuning elements, and planar mounting structures. The effect of these advances is to push the upper frequency operating limit from about 600 to 1500 GHz, and to enhance the feasibility of focal plane arrays of heterodyne receivers. A fundamental high frequency operating limit of SIS mixers is set by the superconducting energy gap. A practical limitation for high frequency operation of SIS junctions is their parasitic capacitance and resistance. The performance of the mixer will be degraded by the Resistor-Capacitor rolloff. Several designs were reported for inductive elements integrated on the same substrate as the SIS junctions to tune out the bulk junction capacitance. Most millimeter SIS-based heterodyne receivers have used waveguide coupling structures. Technology has advanced to the state where programs that have a high probability of success can be defined to produce arrays of SIS receivers for frequencies as high as 1500 GHz.

  16. Microwave blackbodies for spaceborne receivers

    NASA Technical Reports Server (NTRS)

    Stacey, J. M.

    1985-01-01

    The properties of microwave blackbody targets are explained as they apply to the calibration of spaceborne receivers. Also described are several practicable, blackbody targets used to test and calibrate receivers in the laboratory and in the thermal vacuum chamber. Problems with the precision and the accuracy of blackbody targets, and blackbody target design concepts that overcome some of the accuracy limitations present in existing target designs, are presented. The principle of the Brewster angle blackbody target is described where the blackbody is applied as a fixed-temperature test target in the laboratory and as a variable-temperature target in the thermal vacuum chamber. The reflectivity of a Brewster angle target is measured in the laboratory. From this measurement, the emissivity of the target is calculated. Radiatively cooled thermal suspensions are discussed as the coolants of blackbody targets and waveguide terminations that function as calibration devices in spaceborne receivers. Examples are given for the design of radiatively cooled thermal suspensions. Corrugated-horn antennas used to observe the cosmic background and to provide a cold-calibration source for spaceborne receivers are described.

  17. Clark Receives Ocean Sciences Award

    NASA Astrophysics Data System (ADS)

    Roman, Michael R.; Clark, H. Lawrence

    2008-09-01

    H. Lawrence Clark received the 2008 Ocean Sciences Award at the 2008 Ocean Sciences Meeting, held 2-7 March 2008 in Orlando, Fla. The award is given in recognition of outstanding and long-standing service to the ocean sciences.

  18. RFID receiver apparatus and method

    DOEpatents

    Scott, Jeffrey Wayne

    2006-12-26

    An RFID backscatter interrogator for transmitting data to an RFID tag, generating a carrier for the tag, and receiving data from the tag modulated onto the carrier, the interrogator including a single grounded-coplanar wave-guide circuit board and at least one surface mount integrated circuit supported by the circuit board.

  19. Vergano Receives David Perlman Award

    NASA Astrophysics Data System (ADS)

    Kelly, Sue

    2006-08-01

    Dan Vergano received the Perlman Award at the Joint Assembly Honors Ceremony, whichwas held on 25 May 2006 in Baltimore, Md. Vergano was honored for `The Debate's over:Globe is warming,' which describes the linkages between the science of climate change andthe complexity of technical and economic decisions facing its mitigation.

  20. Receivers for modulated digital signals

    NASA Astrophysics Data System (ADS)

    Troendle, K.; Huber, J.

    The realization principles for coherent and incoherent receivers for modulated digital signal transmission are presented. From these principles, the digital amplitude, phase, and frequency modulation are treated. Expressions for the error probabilities in these systems are given, and their required bandwidths and noise sensitivities are compared. Principles of system realization for time-variant channels and methods of clock and carrier recovery are explained.

  1. FACSIM/MRS-1: Cask receiving and consolidation performance assessment

    SciTech Connect

    Lotz, T.L.; Shay, M.R.

    1987-06-01

    A simulation analysis was completed to assess the performance of the shipping cask receiving and spent-fuel handling, consolidation and canistering operations of the Monitored Retrievable Storage (MRS) facility. One purpose of this evaluation was to estimate the limits of MRS operational capabilities and factors leading to those limitations. The model used to obtain the performance assessment, FACSIM/MRS-1, is one of two components of the FACSIM model developed by PNL's simulation effort for the nuclear waste-handling facility. FACSIM/MRS-1 provides the user with information about lag-storage requirements, machine use, cask queues, welder queues, and cask process and cask turnaround times. The model can help determine the effect that the following activities have on operating efficiency: (1) receiving multiple cask shipments, when rail-cask or truck-cask shipments arrive at the facility in groups of two or more, and (2) operating the facility five days per week, three shifts per day or seven days per week, three shifts per day for any conditions. In addition, sensitivity to equipment failure frequency and the time needed for equipment repair can be studied. Information on the above operating characteristics may be obtained for any spent-fuel rate, any split of shipments between truck and rail transport, or any split of boiling water reactor/pressurized water reactor fuel.

  2. Receiving versus being denied an abortion and subsequent tobacco use.

    PubMed

    Roberts, Sarah C M; Foster, Diana Greene

    2015-03-01

    The negative health consequences of tobacco use are well documented. Some research finds women receiving abortions are at increased risk of subsequent tobacco use. This literature has methodological problems, most importantly, inappropriate comparison groups. This study uses data from the Turnaway Study, a longitudinal study of women who all sought, but did not all receive, abortions at 30 facilities across the United States. Participants included women presenting just before an abortion facility's gestational age limit who received abortions (Near Limit Abortion Group, n = 452), just after the gestational limit who were denied abortions (Turnaways, n = 231), and who received first trimester abortions (First Trimester Abortion Group, n = 273). This study examined the association between receiving versus being denied an abortion and subsequent tobacco use over 2-years. Trajectories of tobacco use over 2 years were compared using multivariate mixed effects regression. Women receiving abortion maintained their level of tobacco use over 2 years. Women denied abortion initially had lower levels of tobacco use than women receiving abortion, but increased their tobacco use from 1 week through 12-18 months post-abortion seeking and then decreased their use by 2 years post-abortion seeking. Baseline parity modified these associations. Receiving an abortion was not associated with an increase in tobacco use over time. Overall, women who carry unwanted pregnancies to term appear to demonstrate similar cessation and resumption patterns to other pregnant women.

  3. Scintillation-Hardened GPS Receiver

    NASA Technical Reports Server (NTRS)

    Stephens, Donald R.

    2015-01-01

    CommLargo, Inc., has developed a scintillation-hardened Global Positioning System (GPS) receiver that improves reliability for low-orbit missions and complies with NASA's Space Telecommunications Radio System (STRS) architecture standards. A software-defined radio (SDR) implementation allows a single hardware element to function as either a conventional radio or as a GPS receiver, providing backup and redundancy for platforms such as the International Space Station (ISS) and high-value remote sensing platforms. The innovation's flexible SDR implementation reduces cost, weight, and power requirements. Scintillation hardening improves mission reliability and variability. In Phase I, CommLargo refactored an open-source GPS software package with Kalman filter-based tracking loops to improve performance during scintillation and also demonstrated improved navigation during a geomagnetic storm. In Phase II, the company generated a new field-programmable gate array (FPGA)-based GPS waveform to demonstrate on NASA's Space Communication and Navigation (SCaN) test bed.

  4. Femtosecond Photon-Counting Receiver

    NASA Technical Reports Server (NTRS)

    Krainak, Michael A.; Rambo, Timothy M.; Yang, Guangning; Lu, Wei; Numata, Kenji

    2016-01-01

    An optical correlation receiver is described that provides ultra-precise distance and/or time/pulse-width measurements even for weak (single photons) and short (femtosecond) optical signals. A new type of optical correlation receiver uses a fourth-order (intensity) interferometer to provide micron distance measurements even for weak (single photons) and short (femtosecond) optical signals. The optical correlator uses a low-noise-integrating detector that can resolve photon number. The correlation (range as a function of path delay) is calculated from the variance of the photon number of the difference of the optical signals on the two detectors. Our preliminary proof-of principle data (using a short-pulse diode laser transmitter) demonstrates tens of microns precision.

  5. SAW correlator spread spectrum receiver

    DOEpatents

    Brocato, Robert W

    2014-04-01

    A surface acoustic wave (SAW) correlator spread-spectrum (SS) receiver is disclosed which utilizes a first demodulation stage with a chip length n and a second demodulation stage with a chip length m to decode a transmitted SS signal having a code length l=n.times.m which can be very long (e.g. up to 2000 chips or more). The first demodulation stage utilizes a pair of SAW correlators which demodulate the SS signal to generate an appropriate code sequence at an intermediate frequency which can then be fed into the second demodulation stage which can be formed from another SAW correlator, or by a digital correlator. A compound SAW correlator comprising two input transducers and a single output transducer is also disclosed which can be used to form the SAW correlator SS receiver, or for use in processing long code length signals.

  6. Thompson receives 1994 Bowen award

    NASA Astrophysics Data System (ADS)

    Green, David H.; Thompson, Alan Bruce

    At the Spring Meeting in Baltimore, May 23, 1994, Alan Bruce Thompson of the Eidgenossiche Technische Hochschule, Zurich, received the 1994 N. L. Bowen Award of the Volcanology, Geochemsitry, and Petrology section, which is given for a single outstanding contribution to volcanology, geochemistry, or petrology made during the preceding 5 years. The award was presented by David H. Green of the Research School of Earth Sciences. The citation and response are given here.

  7. Digital-data receiver synchronization

    DOEpatents

    Smith, Stephen F.; Turner, Gary W.

    2005-08-02

    Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  8. A pseudolite-based positioning system for legacy GNSS receivers.

    PubMed

    Kim, Chongwon; So, Hyoungmin; Lee, Taikjin; Kee, Changdon

    2014-03-27

    The ephemeris data format of legacy GPS receivers is improper for positioning stationary pseudolites on the ground. Therefore, to utilize pseudolites for navigation, GPS receivers must be modified so that they can handle the modified data formats of the pseudolites. Because of this problem, the practical use of pseudolites has so far been limited. This paper proposes a pseudolite-based positioning system that can be used with unmodified legacy GPS receivers. In the proposed system, pseudolites transmit simulated GPS signals. The signals use standard GPS ephemeris data format and contain ephemeris data of simulated GPS satellites, not those of pseudolites. The use of the standard format enables the GPS receiver to process pseudolite signals without any modification. However, the position output of the GPS receiver is not the correct position in this system, because there are additional signal delays from each pseudolite to the receiver. A post-calculation process was added to obtain the correct receiver position using GPS receiver output. This re-estimation is possible because it is based on known information about the simulated signals, pseudolites, and positioning process of the GPS receiver. Simulations using generated data and live GPS data are conducted for various geometries to verify the proposed system. The test results show that the proposed system provides the desired user position using pseudolite signals without requiring any modifications to the legacy GPS receiver. In this initial study, a pseudolite-only indoor system was assumed. However, it can be expanded to a GPS-pseudolite system outdoors.

  9. Military veterans with mental health problems: a protocol for a systematic review to identify whether they have an additional risk of contact with criminal justice systems compared with other veterans groups

    PubMed Central

    2012-01-01

    Background There is concern that some veterans of armed forces, in particular those with mental health, drug or alcohol problems, experience difficulty returning to a civilian way of life and may subsequently come into contact with criminal justice services and imprisonment. The aim of this review is to examine whether military veterans with mental health problems, including substance use, have an additional risk of contact with criminal justice systems when compared with veterans who do not have such problems. The review will also seek to identify veterans’ views and experiences on their contact with criminal justice services, what contributed to or influenced their contact and whether there are any differences, including international and temporal, in incidence, contact type, veteran type, their presenting health needs and reported experiences. Methods/design In this review we will adopt a methodological model similar to that previously used by other researchers when reviewing intervention studies. The model, which we will use as a framework for conducting a review of observational and qualitative studies, consists of two parallel synthesis stages within the review process; one for quantitative research and the other for qualitative research. The third stage involves a cross study synthesis, enabling a deeper understanding of the results of the quantitative synthesis. A range of electronic databases, including MEDLINE, PsychINFO, CINAHL, will be systematically searched, from 1939 to present day, using a broad range of search terms that cover four key concepts: mental health, military veterans, substance misuse, and criminal justice. Studies will be screened against topic specific inclusion/exclusion criteria and then against a smaller subset of design specific inclusion/exclusion criteria. Data will be extracted for those studies that meet the inclusion criteria, and all eligible studies will be critically appraised. Included studies, both quantitative and

  10. ICESat-2 / ATLAS Flight Science Receiver Algorithms

    NASA Astrophysics Data System (ADS)

    Mcgarry, J.; Carabajal, C. C.; Degnan, J. J.; Mallama, A.; Palm, S. P.; Ricklefs, R.; Saba, J. L.

    2013-12-01

    . This Simulator makes it possible to check all logic paths that could be encountered by the Algorithms on orbit. In addition the NASA airborne instrument MABEL is collecting data with characteristics similar to what ATLAS will see. MABEL data is being used to test the ATLAS Receiver Algorithms. Further verification will be performed during Integration and Testing of the ATLAS instrument and during Environmental Testing on the full ATLAS instrument. Results from testing to date show the Receiver Algorithms have the ability to handle a wide range of signal and noise levels with a very good sensitivity at relatively low signal to noise ratios. In addition, preliminary tests have demonstrated, using the ICESat-2 Science Team's selected land ice and sea ice test cases, the capability of the Algorithms to successfully find and telemeter the surface echoes. In this presentation we will describe the ATLAS Flight Science Receiver Algorithms and the Software Simulator, and will present results of the testing to date. The onboard databases (DEM, DRM and the Surface Reference Mask) are being developed at the University of Texas at Austin as part of the ATLAS Flight Science Receiver Algorithms. Verification of the onboard databases is being performed by ATLAS Receiver Algorithms team members Claudia Carabajal and Jack Saba.

  11. The Additive Effects of Core Muscle Strengthening and Trunk NMES on Trunk Balance in Stroke Patients

    PubMed Central

    Ko, Eun Jae; Kim, Dae Yul; Yi, Jin Hwa; Kim, Won; Hong, Jayoung

    2016-01-01

    Objective To investigate an additive effect of core muscle strengthening (CMS) and trunk neuromuscular electrical stimulation (tNEMS) on trunk balance in stroke patients. Methods Thirty patients with acute or subacute stroke who were unable to maintain static sitting balance for >5 minutes were enrolled and randomly assigned to 3 groups, i.e., patients in the CMS (n=10) group received additional CMS program; the tNMES group (n=10) received additional tNMES over the posterior back muscles; and the combination (CMS and tNMES) group (n=10) received both treatments. Each additional treatment was performed 3 times per week for 20 minutes per day over 3 weeks. Korean version of Berg Balance Scale (K-BBS), total score of postural assessment scale for stroke patients (PASS), Trunk Impairment Scale (TIS), and Korean version of Modified Barthel Index (K-MBI) were evaluated before and after 3 weeks of therapeutic intervention. Results All 3 groups showed improvements in K-BBS, PASS, TIS, and K-MBI after therapeutic interventions, with some differences. The combination group showed more improvements in K-BBS and the dynamic sitting balance of TIS, as compared to the CMS group; and more improvement in K-BBS, as compared to the tNMES group. Conclusion The results indicated an additive effect of CMS and tNMES on the recovery of trunk balance in patients with acute or subacute stroke who have poor sitting balance. Simultaneous application of CMS and tNMES should be considered when designing a rehabilitation program to improve trunk balance in stroke patients. PMID:26949681

  12. Chip Advancer For GPS Receiver

    NASA Technical Reports Server (NTRS)

    Meehan, Thomas K.; Srinivasan, Jeffrey M.; Thomas, J. Brooks

    1989-01-01

    Instrument errors made negligible. For each integration interval, both delay and rate of change of delay initialized to small fraction of chip - for example, to order of 10 to the negative 7th power - thereby making feedback control and extraction of delay highly accurate and flexible. With appropriate selection of sampling rate relative to chip rate, commensurability errors reduced to extremely small levels. In Global Positioning System (GPS) receiver, pseudorandom code sequence generated by simple digital logic incorporating effects of time, delay, and rate of change of delay. Flexibility in starting time and sum interval very useful in aligning correlation interval with beginnings and endings of data bits.

  13. Digital receiver study and implementation

    NASA Technical Reports Server (NTRS)

    Fogle, D. A.; Lee, G. M.; Massey, J. C.

    1972-01-01

    Computer software was developed which makes it possible to use any general purpose computer with A/D conversion capability as a PSK receiver for low data rate telemetry processing. Carrier tracking, bit synchronization, and matched filter detection are all performed digitally. To aid in the implementation of optimum computer processors, a study of general digital processing techniques was performed which emphasized various techniques for digitizing general analog systems. In particular, the phase-locked loop was extensively analyzed as a typical non-linear communication element. Bayesian estimation techniques for PSK demodulation were studied. A hardware implementation of the digital Costas loop was developed.

  14. 77 FR 37658 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    ... . SUPPLEMENTARY INFORMATION: Revision On 5/25/2012 (77 FR 31335-31336), the Committee for Purchase From People Who... addition must be received on or before June 25, 2012. Additions On 4/13/2012 (77 FR 22289-22290) and 4/20/2012 (77 FR 23665-23666), the Committee for Purchase From People Who Are Blind or Severely...

  15. 75 FR 81235 - Procurement List; Addition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... INFORMATION: Addition On 10/1/2010 (75 FR 60739-60740), the Committee for Purchase From People Who Are Blind... Attendant, Pease Air National Guard Base, Newington, NH. Comments on the proposed addition were received... added to the Procurement List: Service Service Type/Location: Food Service Attendant, Pease Air...

  16. Front end for GPS receivers

    NASA Technical Reports Server (NTRS)

    Thomas, Jr., Jess Brooks (Inventor)

    1999-01-01

    The front end in GPS receivers has the functions of amplifying, down-converting, filtering and sampling the received signals. In the preferred embodiment, only two operations, A/D conversion and a sum, bring the signal from RF to filtered quadrature baseband samples. After amplification and filtering at RF, the L1 and L2 signals are each sampled at RF at a high selected subharmonic rate. The subharmonic sample rates are approximately 900 MHz for L1 and 982 MHz for L2. With the selected subharmonic sampling, the A/D conversion effectively down-converts the signal from RF to quadrature components at baseband. The resulting sample streams for L1 and L2 are each reduced to a lower rate with a digital filter, which becomes a straight sum in the simplest embodiment. The frequency subsystem can be very simple, only requiring the generation of a single reference frequency (e.g. 20.46 MHz minus a small offset) and the simple multiplication of this reference up to the subharmonic sample rates for L1 and L2. The small offset in the reference frequency serves the dual purpose of providing an advantageous offset in the down-converted carrier frequency and in the final baseband sample rate.

  17. Group Work: How to Use Groups Effectively

    ERIC Educational Resources Information Center

    Burke, Alison

    2011-01-01

    Many students cringe and groan when told that they will need to work in a group. However, group work has been found to be good for students and good for teachers. Employers want college graduates to have developed teamwork skills. Additionally, students who participate in collaborative learning get better grades, are more satisfied with their…

  18. Training Groups, Encounter Groups, Sensitivity Groups and Group Psychotherapy

    PubMed Central

    Gottschalk, Louis A.; Pattison, E. Mansell; Schafer, Donald W.

    1971-01-01

    Descriptions and comparison of group therapies and the new group procedures (training groups and sensitivity groups—an outgrowth of the so-called Laboratory Movement methods of the mid-1930's) have been provided for the better understanding of non-psychiatric physicians. A group leader must have proper training and must help his group in its search for its avowed goals, whether he is a group therapist, a sensitivity trainer, or anyone else interested in utilizing group processes. Those goals are either the therapeutic benefit of the individual, as defined in group psychotherapy, or a better understanding of how one functions in groups, as in T-groups or the other group processes in the area of sensitive living. All group situations contain powerful tools which must be handled with proper respect. When so handled by experienced leaders, the individuals involved can achieve their goals in these group experiences. PMID:18730582

  19. Group Counseling

    ERIC Educational Resources Information Center

    Mahler, Clarence A.

    1971-01-01

    This article reviews the major concerns of group counseling and differentiates among group guidance, group counseling, and group therapy. It also evaluates the research status of group counseling and presents implications for the future of this approach. Comment by Carl E. Thoresen follows. (Author)

  20. Approximate additions and working memory in individuals with Down syndrome.

    PubMed

    Belacchi, Carmen; Passolunghi, Maria Chiara; Brentan, Elena; Dante, Arianna; Persi, Lara; Cornoldi, Cesare

    2014-05-01

    There is some evidence that individuals with Down syndrome (DS) may have a poorer mathematical performance and a poorer working memory (WM) than typically developing (TD) children of the same mental age. In both typical and atypical individuals, different aspects of arithmetic and their relationships with WM have been largely studied, but the specific contribution of WM to the representation and elaboration of non-symbolic quantities has received little attention. The present study examined whether individuals with DS are as capable as TD children matched for fluid intelligence of estimating numerosity both of single sets and of added sets resulting when two sequentially presented sets are added together, also considering how these tasks related to verbal and visuospatial WM. Results showed that the DS group's performance was significantly worse than the TD group's in numerosity estimation involving one set, but not when estimating the numerosity resulting from the addition. Success in the addition task was related to success in the working memory tasks, but only for the group with DS; this applied especially to the visuospatial component, which (unlike the verbal component) was not impaired in the group with DS. It is concluded that the two numerosity tasks involve different processes. It is concluded that the arithmetical and working memory difficulties of individuals with DS are not general, and they can draw on their WM resources when estimating the numerosity of additions. PMID:24602332

  1. Sheeley Receives 2009 Hale Prize

    NASA Astrophysics Data System (ADS)

    Tretkoff, Ernie

    2009-05-01

    Neil Sheeley Jr., of the Space Science Division of the Naval Research Laboratory (NRL), has been awarded the 2009 George Ellery Hale Prize by the Solar Physics Division of the American Astronomical Society (AAS). The international award recognizes work in solar astronomy done over an extended period of time. Sheeley will receive the award in June at the AAS meeting in Pasadena, Calif. Sheeley is cited "for his continuing outstanding contributions to our understanding of the solar magnetic field, coronal holes, and coronal mass ejections. His wide-ranging observational and theoretical work has laid the foundation for much current research in solar and heliospheric physics, and continues to have important applications in space weather prediction."

  2. POVM Receivers for Quantum Cryptography

    NASA Astrophysics Data System (ADS)

    Brandt, H. E.

    1997-04-01

    Positive operator valued measures (POVMs) are finding increasing use in quantum cryptography.(A. Peres, Quantum Theory: Concepts and Methods, Kluwer Academic Publishers, Boston (1993).) I present quantum circuit analyses of two recently proposed (H. E. Brandt, J. M. Myers, and S. J. Lomonaco Jr., "New Results in Entangled Translucent Eavesdropping in Quantum Cryptography," in Photonic Quantum Computing, S. P. Hotaling and A. R. Pirich, Editors, Proc. SPIE 3076 (1997)) all-optical designs for POVM receivers to be used in conjunction with Bennett's B92 protocol for key distribution based on two photon polarization states. Expectation values for the POVM operators are calculated and shown to be faithfully realized by the POVM detectors.

  3. A cryogenic receiver for EPR.

    PubMed

    Narkowicz, R; Ogata, H; Reijerse, E; Suter, D

    2013-12-01

    Cryogenic probes have significantly increased the sensitivity of NMR. Here, we present a compact EPR receiver design capable of cryogenic operation. Compared to room temperature operation, it reduces the noise by a factor of ≈2.5. We discuss in detail the design and analyze the resulting noise performance. At low microwave power, the input noise density closely follows the emission of a cooled 50Ω resistor over the whole measurement range from 20K up to room temperature. To minimize the influence of the microwave source noise, we use high microwave efficiency (≈1.1-1.7mTW(-1/2)) planar microresonators. Their efficient conversion of microwave power to magnetic field permits EPR measurements with very low power levels, typically ranging from a few μW down to fractions of nW.

  4. Preamplifier Noise in VLF Receivers

    NASA Technical Reports Server (NTRS)

    Burhans, R. W.

    1978-01-01

    Noise specifications for junction field-effect transistors are presented in different ways depending on the particular semiconductor manufacturer. Arithmetic involved in converting these specifications to equivalent RMS noise in microvolts developed at the preamplifier input terminal is reviewed. These methods were useful for estimating the noise performance of high input impedance preamplifiers used with E-field antennas operating in the range of 1 KHz to 10 MHz. Both the JFET MPF-102 transistor and the COS/MOS CA3600 transistor array provided amplification for VLF receivers where the internally generated noise was well below the atmospheric noise level. The CA3600 transistor array provided better performance because of the more symmetrical complementary MOS transistor transfer characteristics than a single N-type biased JFET transistor. The CMOS amplifier resulted in self-compensating gain characteristics over a very wide temperature range from -55 to +125 C.

  5. Working Group 7 Summary

    SciTech Connect

    Nagaitsev S.; Berg J.

    2012-06-10

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  6. Receivers Gather Data for Climate, Weather Prediction

    NASA Technical Reports Server (NTRS)

    2012-01-01

    Signals from global positioning system (GPS) satellites are now being used for more than just location and navigation information. By looking at the radio waves from GPS satellites, a technology developed at NASA s Jet Propulsion Laboratory (JPL) not only precisely calculates its position, but can also use a technique known as radio occultation to help scientists study the Earth s atmosphere and gravity field to improve weather forecasts, monitor climate change, and enhance space weather research. The University Corporation for Atmospheric Research (UCAR), a nonprofit group of universities in Boulder, Colorado, compares radio occultation to the appearance of a pencil when viewed though a glass of water. The water molecules change the path of visible light waves so that the pencil appears bent, just like molecules in the air bend GPS radio signals as they pass through (or are occulted by) the atmosphere. Through measurements of the amount of bending in the signals, scientists can construct detailed images of the ionosphere (the energetic upper part of the atmosphere) and also gather information about atmospheric density, pressure, temperature, and moisture. Once collected, this data can be input into weather forecasting and climate models for weather prediction and climate studies. Traditionally, such information is obtained through the use of weather balloons. In 1998, JPL started developing a new class of GPS space science receivers, called Black Jack, that could take precise measurements of how GPS signals are distorted or delayed along their way to the receiver. By 2006, the first demonstration of a GPS radio occultation constellation was launched through a collaboration among Taiwan s National Science Council and National Space Organization, the U.S. National Science Foundation, NASA, the National Oceanic and Atmospheric Administration (NOAA), and other Federal entities. Called the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC

  7. Hybrid solar central receiver for combined cycle power plant

    DOEpatents

    Bharathan, D.; Bohn, M.S.; Williams, T.A.

    1995-05-23

    A hybrid combined cycle power plant is described including a solar central receiver for receiving solar radiation and converting it to thermal energy. The power plant includes a molten salt heat transfer medium for transferring the thermal energy to an air heater. The air heater uses the thermal energy to preheat the air from the compressor of the gas cycle. The exhaust gases from the gas cycle are directed to a steam turbine for additional energy production. 1 figure.

  8. Hybrid solar central receiver for combined cycle power plant

    DOEpatents

    Bharathan, Desikan; Bohn, Mark S.; Williams, Thomas A.

    1995-01-01

    A hybrid combined cycle power plant including a solar central receiver for receiving solar radiation and converting it to thermal energy. The power plant includes a molten salt heat transfer medium for transferring the thermal energy to an air heater. The air heater uses the thermal energy to preheat the air from the compressor of the gas cycle. The exhaust gases from the gas cycle are directed to a steam turbine for additional energy production.

  9. Sensitive Broadband Receivers for Microwave Limb Sounding

    NASA Astrophysics Data System (ADS)

    Ward, J. S.; Lee, K. A.; Kawamura, J.; Chattopadhyay, G.; Stek, P. C.

    2007-12-01

    Microwave limb sounding is a proven remote-sensing technique that resolves the spectra of microwave thermal emission along a limb view of the earth's atmosphere with a cold space background. The temperature and composition of the atmosphere as a function of altitude is retrieved by analyzing the spectra returned from a vertical scan of the limb. The Microwave Limb Sounder (MLS) instrument on the NASA Upper Atmosphere Research Satellite (UARS) was the first experiment to study the microwave limb from space, and was followed by the current EOS MLS instrument on the Aura spacecraft. We are developing a new class of highly-sensitive broadband receivers for a next-generation microwave limb sounder that scans the limb in elevation and azimuth to generate a 3-D map of atmospheric composition. Sensitive receivers are needed to reduce integration times to allow the addition of rapid horizontal scanning while maintaining high measurement precision. The Scanning Microwave Limb Sounder (SMLS) will sample a 6000 km cross track swath with 50 km resolution while doubling the vertical resolution of its predecessor, Aura MLS. The wide swath allows for six or more daily samples for most of the mid latitudes. These frequent measurements, combined with the good horizontal and high vertical resolution of SMLS are key to enabling the study of fast processes in the upper troposphere affecting chemistry, climate, and air quality. Two receivers are being developed for SMLS: a 230 GHz channel will be used to study the upper troposphere and a 640 GHz channel will focus on measurements of the stratosphere. Both receivers feature broad tunable bandwidth (100 GHz each) to enable measurements of many important species including water, ozone, CO, HCN, NO, SO2, and acetone. Each receiver will downconvert the signal using a superconductor-insulator- superconductor (SIS) heterodyne mixer to achieve sensitivities of 100 K and 200 K for the 230 GHz and 640 GHz channels, respectively. The high spectral

  10. Cryogenic 160-GHz MMIC Heterodyne Receiver Module

    NASA Technical Reports Server (NTRS)

    Samoska, Lorene A.; Soria, Mary M.; Owen, Heather R.; Dawson, Douglas E.; Kangaslahti, Pekka P.; Gaier, Todd C.; Voll, Patricia; Lau, Judy; Sieth, Matt; Church, Sarah

    2011-01-01

    . Additionally, the use of a W-band isolator between the receiver module and the local oscillator source also improved the noise temperature substantially. This may be because the mixer was presented with a better impedance match with the use of the isolator. Cryogenic testing indicates a system noise temperature of 100 K or less at 166 GHz. Prior tests of the MMIC amplifiers alone have resulted in a system noise temperature of 65.70 K in the same frequency range (.160 GHz) when cooled to an ambient temperature of 20 K. While other detector systems may be slightly more sensitive (such as SIS mixers), they require more cooling (to 4 K ambient) and are not as easily scalable to build a large array, due to the need for large magnets and other equipment. When cooled to 20 K, this receiver module achieves approximately 100 K system noise temperature, which is slightly higher than single-amplifier module results obtained at JPL (65.70 K when an amplifier is corrected for back-end noise contributions). If this performance can be realized in practice, and a scalable array can be produced, the impact on cosmic microwave background experiments, astronomical and Earth spectroscopy, interferometry, and radio astronomy in general will be dramatic.

  11. 42 CFR 435.217 - Individuals receiving home and community-based services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Individuals receiving home and community-based... receiving home and community-based services. The agency may provide Medicaid to any group or groups of individuals in the community who meet the following requirements: (a) The group would be eligible for...

  12. 42 CFR 436.217 - Individuals receiving home and community-based services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Individuals receiving home and community-based... receiving home and community-based services. The agency may provide Medicaid to any group or groups of individuals in the community who meet the following requirements: (a) The group would be eligible for...

  13. 13 CFR 120.1723 - Pool Loan receivables received by Seller.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Pool Loan receivables received by... LOANS Establishment of SBA Secondary Market Guarantee Program for First Lien Position 504 Loan Pools § 120.1723 Pool Loan receivables received by Seller. Any Pool Loan Receivables received by Seller...

  14. 13 CFR 120.1723 - Pool Loan receivables received by Seller.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false Pool Loan receivables received by... LOANS Establishment of SBA Secondary Market Guarantee Program for First Lien Position 504 Loan Pools § 120.1723 Pool Loan receivables received by Seller. Any Pool Loan Receivables received by Seller...

  15. 13 CFR 120.1723 - Pool Loan receivables received by Seller.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Pool Loan receivables received by... LOANS Establishment of SBA Secondary Market Guarantee Program for First Lien Position 504 Loan Pools § 120.1723 Pool Loan receivables received by Seller. Any Pool Loan Receivables received by Seller...

  16. 13 CFR 120.1723 - Pool Loan receivables received by Seller.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false Pool Loan receivables received by... LOANS Establishment of SBA Secondary Market Guarantee Program for First Lien Position 504 Loan Pools § 120.1723 Pool Loan receivables received by Seller. Any Pool Loan Receivables received by Seller...

  17. 13 CFR 120.1723 - Pool Loan receivables received by Seller.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Pool Loan receivables received by... LOANS Establishment of SBA Secondary Market Guarantee Program for First Lien Position 504 Loan Pools § 120.1723 Pool Loan receivables received by Seller. Any Pool Loan Receivables received by Seller...

  18. Fluid absorption solar energy receiver

    NASA Technical Reports Server (NTRS)

    Bair, Edward J.

    1993-01-01

    A conventional solar dynamic system transmits solar energy to the flowing fluid of a thermodynamic cycle through structures which contain the gas and thermal energy storage material. Such a heat transfer mechanism dictates that the structure operate at a higher temperature than the fluid. This investigation reports on a fluid absorption receiver where only a part of the solar energy is transmitted to the structure. The other part is absorbed directly by the fluid. By proportioning these two heat transfer paths the energy to the structure can preheat the fluid, while the energy absorbed directly by the fluid raises the fluid to its final working temperature. The surface temperatures need not exceed the output temperature of the fluid. This makes the output temperature of the gas the maximum temperature in the system. The gas can have local maximum temperatures higher than the output working temperature. However local high temperatures are quickly equilibrated, and since the gas does not emit radiation, local high temperatures do not result in a radiative heat loss. Thermal radiation, thermal conductivity, and heat exchange with the gas all help equilibrate the surface temperature.

  19. Recent developments in superconducting receivers

    SciTech Connect

    Richards, P.L.

    1990-09-01

    A description is given of recent work at Berkeley on superconducting mixers and detectors for infrared and millimeter wavelengths. The first report is a review article which summarizes the status of development of superconducting components for infrared and millimeter wave receivers. The next report describes accurate measurements and also theoretical modeling of an SIS quasiparticle waveguide mixer for W-band which uses very high quality Ta junctions. The best mixer noise is only 1.3 times the quantum limit. Both the mixer gain and the noise are in quantitative agreement with the quantum theory. Next, a report is given on measurements and theoretical modeling of the absorptivity (surface resistance) of high quality epitaxial films of the high {Tc} superconductor YBCO from 750 GHz to 21 THz. Finally, there are reports on the design and experimental performance of two different types of high {Tc} bolometric detectors. One is a conventional bolometer with a gold-black absorber. The other is an antenna coupled microbolometer.

  20. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  1. Group X

    SciTech Connect

    Fields, Susannah

    2007-08-16

    This project is currently under contract for research through the Department of Homeland Security until 2011. The group I was responsible for studying has to remain confidential so as not to affect the current project. All dates, reference links and authors, and other distinguishing characteristics of the original group have been removed from this report. All references to the name of this group or the individual splinter groups has been changed to 'Group X'. I have been collecting texts from a variety of sources intended for the use of recruiting and radicalizing members for Group X splinter groups for the purpose of researching the motivation and intent of leaders of those groups and their influence over the likelihood of group radicalization. This work included visiting many Group X websites to find information on splinter group leaders and finding their statements to new and old members. This proved difficult because the splinter groups of Group X are united in beliefs, but differ in public opinion. They are eager to tear each other down, prove their superiority, and yet remain anonymous. After a few weeks of intense searching, a list of eight recruiting texts and eight radicalizing texts from a variety of Group X leaders were compiled.

  2. Thermal resistance model for CSP central receivers

    NASA Astrophysics Data System (ADS)

    de Meyer, O. A. J.; Dinter, F.; Govender, S.

    2016-05-01

    The receiver design and heliostat field aiming strategy play a vital role in the heat transfer efficiency of the receiver. In molten salt external receivers, the common operating temperature of the heat transfer fluid or molten salt ranges between 285°C to 565°C. The optimum output temperature of 565°C is achieved by adjusting the mass flow rate of the molten salt through the receiver. The reflected solar radiation onto the receiver contributes to the temperature rise in the molten salt by means of heat transfer. By investigating published work on molten salt external receiver operating temperatures, corresponding receiver tube surface temperatures and heat losses, a model has been developed to obtain a detailed thermographic representation of the receiver. The steady state model uses a receiver flux map as input to determine: i) heat transfer fluid mass flow rate through the receiver to obtain the desired molten salt output temperature of 565°C, ii) receiver surface temperatures iii) receiver tube temperatures iv) receiver efficiency v) pressure drop across the receiver and vi) corresponding tube strain per panel.

  3. Group Flow and Group Genius

    ERIC Educational Resources Information Center

    Sawyer, Keith

    2015-01-01

    Keith Sawyer views the spontaneous collaboration of group creativity and improvisation actions as "group flow," which organizations can use to function at optimum levels. Sawyer establishes ideal conditions for group flow: group goals, close listening, complete concentration, being in control, blending egos, equal participation, knowing…

  4. Arvidson Receives 2007 Whipple Award

    NASA Astrophysics Data System (ADS)

    Spohn, Tilman; Arvidson, Raymond E.

    2008-03-01

    The Planetary Sciences section presents with great pleasure the 2007 AGU Whipple Award to Ray Arvidson. Ray has participated in all Mars missions since Viking, and in Magellan. His vigorous and productive career has resulted in nearly 200 peer-reviewed publications on Earth, Mars, Venus, and the Moon, many of which are considered pivotal to our understanding of planetary processes. His topics include remote sensing of planetary surfaces and surface processes; he provided the first quantitative study of aeolian processes on Mars. Ray's contributions are numerous and broadly applied. He played a major role in developing robotic techniques for the in situ exploration of Mars, in particular for the hugely successful MER mission. An AGU Fellow, Ray's work has been recognized by numerous awards in the past. In addition to his scientific work, Ray has provided essential services to the community. His work in pioneering and standardizing planetary data archiving has been particularly recognized as outstanding. He has served on more than 30 NASA committees and was the secretary and the president of the AGU Planetary Sciences section. In addition, he has been an associate editor of JGR and an editor of Geology. He served on the Space Science Board of the National Academy of Sciences and has been chair of its Committee on Data Management and Computation. Enthusiastic support for his nomination came from all over the world.

  5. Acceptance and Commitment Therapy Group Treatment for Symptoms of Borderline Personality Disorder: A Public Sector Pilot Study

    ERIC Educational Resources Information Center

    Morton, Jane; Snowdon, Sharon; Gopold, Michelle; Guymer, Elise

    2012-01-01

    A pilot study of a brief group-based Acceptance and Commitment Therapy (ACT) intervention (12 two-hour sessions) was conducted with clients of public mental health services meeting four or more criteria for borderline personality disorder (BPD). Participants were randomly assigned to receive the ACT group intervention in addition to their current…

  6. A pseudolite-based positioning system for legacy GNSS receivers.

    PubMed

    Kim, Chongwon; So, Hyoungmin; Lee, Taikjin; Kee, Changdon

    2014-01-01

    The ephemeris data format of legacy GPS receivers is improper for positioning stationary pseudolites on the ground. Therefore, to utilize pseudolites for navigation, GPS receivers must be modified so that they can handle the modified data formats of the pseudolites. Because of this problem, the practical use of pseudolites has so far been limited. This paper proposes a pseudolite-based positioning system that can be used with unmodified legacy GPS receivers. In the proposed system, pseudolites transmit simulated GPS signals. The signals use standard GPS ephemeris data format and contain ephemeris data of simulated GPS satellites, not those of pseudolites. The use of the standard format enables the GPS receiver to process pseudolite signals without any modification. However, the position output of the GPS receiver is not the correct position in this system, because there are additional signal delays from each pseudolite to the receiver. A post-calculation process was added to obtain the correct receiver position using GPS receiver output. This re-estimation is possible because it is based on known information about the simulated signals, pseudolites, and positioning process of the GPS receiver. Simulations using generated data and live GPS data are conducted for various geometries to verify the proposed system. The test results show that the proposed system provides the desired user position using pseudolite signals without requiring any modifications to the legacy GPS receiver. In this initial study, a pseudolite-only indoor system was assumed. However, it can be expanded to a GPS-pseudolite system outdoors. PMID:24681674

  7. A Pseudolite-Based Positioning System for Legacy GNSS Receivers

    PubMed Central

    Kim, Chongwon; So, Hyoungmin; Lee, Taikjin; Kee, Changdon

    2014-01-01

    The ephemeris data format of legacy GPS receivers is improper for positioning stationary pseudolites on the ground. Therefore, to utilize pseudolites for navigation, GPS receivers must be modified so that they can handle the modified data formats of the pseudolites. Because of this problem, the practical use of pseudolites has so far been limited. This paper proposes a pseudolite-based positioning system that can be used with unmodified legacy GPS receivers. In the proposed system, pseudolites transmit simulated GPS signals. The signals use standard GPS ephemeris data format and contain ephemeris data of simulated GPS satellites, not those of pseudolites. The use of the standard format enables the GPS receiver to process pseudolite signals without any modification. However, the position output of the GPS receiver is not the correct position in this system, because there are additional signal delays from each pseudolite to the receiver. A post-calculation process was added to obtain the correct receiver position using GPS receiver output. This re-estimation is possible because it is based on known information about the simulated signals, pseudolites, and positioning process of the GPS receiver. Simulations using generated data and live GPS data are conducted for various geometries to verify the proposed system. The test results show that the proposed system provides the desired user position using pseudolite signals without requiring any modifications to the legacy GPS receiver. In this initial study, a pseudolite-only indoor system was assumed. However, it can be expanded to a GPS-pseudolite system outdoors. PMID:24681674

  8. The Study of External Dose Rate and Retained Body Activity of Patients Receiving 131I Therapy for Differentiated Thyroid Carcinoma

    PubMed Central

    Zhang, Haiying; Jiao, Ling; Cui, Songye; Wang, Liang; Tan, Jian; Zhang, Guizhi; He, Yajing; Ruan, Shuzhou; Fan, Saijun; Zhang, Wenyi

    2014-01-01

    Radiation safety is an integral part of targeted radionuclide therapy. The aim of this work was to study the external dose rate and retained body activity as functions of time in differentiated thyroid carcinoma patients receiving 131I therapy. Seventy patients were stratified into two groups: the ablation group (A) and the follow-up group (FU). The patients’ external dose rate was measured, and simultaneously, their retained body radiation activity was monitored at various time points. The equations of the external dose rate and the retained body activity, described as a function of hours post administration, were fitted. Additionally, the release time for patients was calculated. The reduction in activity in the group receiving a second or subsequent treatment was more rapid than the group receiving only the initial treatment. Most important, an expeditious method was established to indirectly evaluate the retained body activity of patients by measuring the external dose rate with a portable radiation survey meter. By this method, the calculated external dose rate limits are 19.2, 8.85, 5.08 and 2.32 μSv·h−1 at 1, 1.5, 2 and 3 m, respectively, according to a patient’s released threshold level of retained body activity <400 MBq. This study is beneficial for radiation safety decision-making. PMID:25337944

  9. Isopermutation group

    SciTech Connect

    Muktibodh, A. S.

    2015-03-10

    The concept of ‘Isotopy’ as formulated by Ruggero Maria Santilli [1, 2, 3] plays a vital role in the development of Iso mathematics. Santilli defined iso-fields of characteristic zero. In this paper we extend this definition to define Iso-Galois fields [4] which are essentially of non-zero characteristic. Isotopically isomorphic realizations of a group define isopermutation group which gives a clear cut distinction between automorphic groups and isotopic groups.

  10. Hot Groups.

    ERIC Educational Resources Information Center

    Vail, Kathleen

    1996-01-01

    Collaborators sparked by creative ideas and obsessed by a common task may not realize they're part of a "hot group"--a term coined by business professors Harold J. Leavitt and Jean Lipman-Blumen. Spawned by group decision making and employee empowerment, hot groups can flourish in education settings. They're typically small, short lived, and goal…

  11. 47 CFR 36.605 - Calculation of safety net additive.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... exchange carriers shall not receive safety net additive for growth of Telecommunications Plant in Service... longer receive safety net additive after January 1, 2012 unless the carrier's realized total growth in Telecommunications Plant in Service was more than 14 percent during the qualifying period, defined as 2010 or...

  12. 47 CFR 36.605 - Calculation of safety net additive.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... exchange carriers shall not receive safety net additive for growth of Telecommunications Plant in Service... longer receive safety net additive after January 1, 2012 unless the carrier's realized total growth in Telecommunications Plant in Service was more than 14 percent during the qualifying period, defined as 2010 or...

  13. Interference Mitigation in Transmitted-Reference UWB Receivers

    SciTech Connect

    Spiridon, A; Nekoogar, F; Dowla, F

    2004-01-14

    The transmitted-reference (TR) ultra-wideband transceivers [4] have recently become increasingly popular for their simplicity, capability to reduce the stringent UWB timing requirements, and robust performance in multipath channels. However, the performance of TR receivers is considerably limited by the severity of noise-on-noise component introduced by various types of channel noise such as additive white Gaussian noise (AWGN) or narrowband interference (NBI) on the transmitted signal [6]. It is expected that such receivers will perform poorly at low signal-to-noise ratio links, or in the presence of strong narrowband interferers. In this paper we propose a novel technique that maximizes the extraction of information from reference pulses for UWB-TR receivers. The scheme efficiently processes the incoming signal to suppress different types of interference prior to signal detection. The method described introduces a feedback loop mechanism to enhance the signal-to-noise ratio of reference pulses in a conventional TR receiver. The performance of a conventional TR receiver and a feedback loop TR receiver in the presence of AWGN and strong narrowband interference is investigated by analysis and computer simulations. Our studies show that the reference enhancing feedback loop mechanism greatly improves the robustness of the link performance of TR receivers in the presence of non-UWB interferes with modest increase in complexity.

  14. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Irwin, S. H.; NELSON; Roleyni, G.

    1977-01-01

    Optimal design studies of MLS angle-receivers and a theoretical design-study of MLS DME-receivers are reported. The angle-receiver results include an integration of the scan data processor and tracking filter components of the optimal receiver into a unified structure. An extensive simulation study comparing the performance of the optimal and threshold receivers in a wide variety of representative dynamical interference environments was made. The optimal receiver was generally superior. A simulation of the performance of the threshold and delay-and-compare receivers in various signal environments was performed. An analysis of combined errors due to lateral reflections from vertical structures with small differential path delays, specular ground reflections with neglible differential path delays, and thermal noise in the receivers is provided.

  15. High speed receiver for capsule endoscope.

    PubMed

    Woo, S H; Yoon, K W; Moon, Y K; Lee, J H; Park, H J; Kim, T W; Choi, H C; Won, C H; Cho, J H

    2010-10-01

    In this study, a high-speed receiver for a capsule endoscope was proposed and implemented. The proposed receiver could receive 20 Mbps data that was sufficient to receive images with a higher resolution than conventional receivers. The receiver used a 1.2 GHz band to receive radio frequency (RF) signal, and demodulated the signal to an intermediate frequency (IF) stage (150 MHz). The demodulated signal was amplified, filtered, and under-sampled by a high-speed analog-to-digital converter (ADC). In order to decode the under-sampled data in real time, a simple frequency detection algorithm was selected and was implemented by using a FPGA. The implemented system could receive 20 Mbps data.

  16. Trough Receiver Heat Loss Testing (Presentation)

    SciTech Connect

    Lewandowski, A.; Feik, C.; Hansen, R.; Phillips, S.; Bingham, C.; Netter, J.; Forristal, R.; Burkholder, F.; Meglan, B.; Wolfrum, E.

    2006-02-01

    This presentation describes the design, fabrication, and qualification of an experimental capability for thermal loss testing of full-size trough receiver elements; and the testing on a variety of receivers.

  17. How To Improve You Shipping and Receiving.

    ERIC Educational Resources Information Center

    Sturgeon, Julie

    2001-01-01

    Discusses how two universities improved their shipping and receiving operations and cut costs. Examples from the University of Texas at Dallas and John Hopkins University, Baltimore, Maryland, illustrate how they established greater shipping and receiving department efficiencies. (GR)

  18. Code and codeless ionospheric measurements with NASA's Rogue GPS Receiver

    NASA Technical Reports Server (NTRS)

    Srinivasan, Jeff M.; Meehan, Tom K.; Young, Lawrence E.

    1989-01-01

    The NASA/JPL Rogue Receiver is an 8-satellite, non-multiplexed, highly digital global positioning system (GPS) receiver that can obtain dual frequency data either with or without knowledge of the P-code. In addition to its applications for high accuracy geodesy and orbit determination, the Rogue uses GPS satellite signals to measure the total electron content (TEC) of the ionosphere along the lines of sight from the receiver to the satellites. These measurements are used by JPL's Deep Space Network (DSN) for calibrating radiometric data. This paper will discuss Rogue TEC measurements, emphasizing the advantages of a receiver that can use the P-code, when available, but can also obtain reliable dual frequency data when the code is encrypted.

  19. Additional deleterious effects of alcohol consumption on sperm parameters and DNA integrity in diabetic mice.

    PubMed

    Pourentezari, M; Talebi, A R; Mangoli, E; Anvari, M; Rahimipour, M

    2016-06-01

    The aim of this study was to survey the impact of alcohol consumption on sperm parameters and DNA integrity in experimentally induced diabetic mice. A total of 32 adult male mice were divided into four groups: mice of group 1 served as control fed on basal diet, group 2 received streptozotocin (STZ) (200 mg kg(-1) , single dose, intraperitoneal) and basal diet, group 3 received alcohol (10 mg kg(-1) , water soluble) and basal diet, and group 4 received STZ and alcohol for 35 days. The cauda epididymidis of each mouse was dissected and placed in 1 ml of pre-warm Ham's F10 culture medium for 30 min. The swim-out spermatozoa were analysed for count, motility, morphology and viability. Sperm chromatin quality was evaluated with aniline blue, toluidine blue, acridine orange and chromomycin A3 staining. The results showed that all sperm parameters had significant differences (P < 0.05), also when sperm chromatin was assessed with cytochemical tests. There were significant differences (P < 0.001) between the groups. According to our results, alcohol and diabetes can cause abnormalities in sperm parameters and chromatin quality. In addition, alcohol consumption in diabetic mice can intensify sperm chromatin/DNA damage. PMID:26358836

  20. Telemetry Tests Of The Advanced Receiver II

    NASA Technical Reports Server (NTRS)

    Hinedi, Sami M.; Bevan, Roland P.; Marina, Miguel

    1993-01-01

    Report describes telemetry tests of Advanced Receiver II (ARX-II): digital radio receiving subsystem operating on intermediate-frequency output of another receiving subsystem called "multimission receiver" (MMR), detecting carrier, subcarrier, and data-symbol signals transmitted by spacecraft, and extracts Doppler information from signals. Analysis of data shows performance of MMR/ARX-II system comparable and sometimes superior to performances of Blk-III/BPA and Blk-III/SDA/SSA systems.

  1. Galaxy groups

    SciTech Connect

    Brent Tully, R.

    2015-02-01

    Galaxy groups can be characterized by the radius of decoupling from cosmic expansion, the radius of the caustic of second turnaround, and the velocity dispersion of galaxies within this latter radius. These parameters can be a challenge to measure, especially for small groups with few members. In this study, results are gathered pertaining to particularly well-studied groups over four decades in group mass. Scaling relations anticipated from theory are demonstrated and coefficients of the relationships are specified. There is an update of the relationship between light and mass for groups, confirming that groups with mass of a few times 10{sup 12}M{sub ⊙} are the most lit up while groups with more and less mass are darker. It is demonstrated that there is an interesting one-to-one correlation between the number of dwarf satellites in a group and the group mass. There is the suggestion that small variations in the slope of the luminosity function in groups are caused by the degree of depletion of intermediate luminosity systems rather than variations in the number per unit mass of dwarfs. Finally, returning to the characteristic radii of groups, the ratio of first to second turnaround depends on the dark matter and dark energy content of the universe and a crude estimate can be made from the current observations of Ω{sub matter}∼0.15 in a flat topology, with a 68% probability of being less than 0.44.

  2. 29 CFR 1917.155 - Air receivers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Air receivers. 1917.155 Section 1917.155 Labor Regulations...) MARINE TERMINALS Related Terminal Operations and Equipment § 1917.155 Air receivers. (a) Application. This section applies to compressed air receivers and equipment used for operations such as...

  3. 29 CFR 1917.155 - Air receivers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Air receivers. 1917.155 Section 1917.155 Labor Regulations...) MARINE TERMINALS Related Terminal Operations and Equipment § 1917.155 Air receivers. (a) Application. This section applies to compressed air receivers and equipment used for operations such as...

  4. Battle Keeps Solar Energy in Receiver

    NASA Technical Reports Server (NTRS)

    Mcdougal, A. R.; Hale, R. R.

    1982-01-01

    Mirror structure in solar concentrator reduces heat loss by reflection and reradiation. Baffle reflects entering rays back and forth in solar-concentrator receiver until they reach heat exchanger. Similarly, infrared energy reradiated by heat exchanger is prevented from leaving receiver. Surfaces of baffle and inside wall of receiver are polished and highly reflective at solar and infrared wavelengths.

  5. 47 CFR 80.1013 - Receiver.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Receiver. 80.1013 Section 80.1013 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1013 Receiver. The bridge-to-bridge receiver must be...

  6. 49 CFR 393.88 - Television receivers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Television receivers. 393.88 Section 393.88... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.88 Television receivers. Any motor vehicle equipped with a television viewer, screen or other means of visually receiving a...

  7. 21 CFR 1020.10 - Television receivers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... volts if the receiver is designed to operate from nominal 110 to 120 root mean square volt power sources. If the receiver is designed to operate from a power source having some voltage other than from... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Television receivers. 1020.10 Section 1020.10...

  8. 21 CFR 1020.10 - Television receivers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... volts if the receiver is designed to operate from nominal 110 to 120 root mean square volt power sources. If the receiver is designed to operate from a power source having some voltage other than from... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Television receivers. 1020.10 Section 1020.10...

  9. 21 CFR 1020.10 - Television receivers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... volts if the receiver is designed to operate from nominal 110 to 120 root mean square volt power sources. If the receiver is designed to operate from a power source having some voltage other than from... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Television receivers. 1020.10 Section 1020.10...

  10. 49 CFR 393.88 - Television receivers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Television receivers. 393.88 Section 393.88... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.88 Television receivers. Any motor vehicle equipped with a television viewer, screen or other means of visually receiving a...

  11. 49 CFR 393.88 - Television receivers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Television receivers. 393.88 Section 393.88... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.88 Television receivers. Any motor vehicle equipped with a television viewer, screen or other means of visually receiving a...

  12. 49 CFR 393.88 - Television receivers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Television receivers. 393.88 Section 393.88... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.88 Television receivers. Any motor vehicle equipped with a television viewer, screen or other means of visually receiving a...

  13. 49 CFR 393.88 - Television receivers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Television receivers. 393.88 Section 393.88... NECESSARY FOR SAFE OPERATION Miscellaneous Parts and Accessories § 393.88 Television receivers. Any motor vehicle equipped with a television viewer, screen or other means of visually receiving a...

  14. 29 CFR 1917.155 - Air receivers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Air receivers. 1917.155 Section 1917.155 Labor Regulations...) MARINE TERMINALS Related Terminal Operations and Equipment § 1917.155 Air receivers. (a) Application. This section applies to compressed air receivers and equipment used for operations such as...

  15. 49 CFR 236.730 - Coil, receiver.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Coil, receiver. 236.730 Section 236.730 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Coil, receiver. Concentric layers of insulated wire wound around the core of a receiver of an...

  16. 49 CFR 236.730 - Coil, receiver.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Coil, receiver. 236.730 Section 236.730 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Coil, receiver. Concentric layers of insulated wire wound around the core of a receiver of an...

  17. 47 CFR 80.1013 - Receiver.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Receiver. 80.1013 Section 80.1013 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1013 Receiver. The bridge-to-bridge receiver must be...

  18. Kastens Receives 2009 Excellence in Geophysical Education Award

    NASA Astrophysics Data System (ADS)

    Manduca, Cathryn A.; Kastens, Kim Anne

    2009-07-01

    Kim Anne Kastens received the Excellence in Geophysical Education Award at the Joint Assembly, held 26 May 2009 in Toronto, Ontario, Canada. The award honors “a sustained commitment to excellence in geophysical education by a team, individual, or group.”

  19. Comparing Relaxation Programs for Breast Cancer Patients Receiving Radiotherapy

    Cancer.gov

    In this study, women with breast cancer who have had surgery and are scheduled to undergo radiation therapy will be randomly assigned to one of two different stretching and relaxation programs or to a control group that will receive usual care.

  20. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  1. GROUP INEQUALITY

    PubMed Central

    Bowles, Samuel; Loury, Glenn C.; Sethi, Rajiv

    2014-01-01

    We explore the combined effect of segregation in social networks, peer effects, and the relative size of a historically disadvantaged group on the incentives to invest in market-rewarded skills and the dynamics of inequality between social groups. We identify conditions under which group inequality will persist in the absence of differences in ability, credit constraints, or labor market discrimination. Under these conditions, group inequality may be amplified even if initial group differences are negligible. Increases in social integration may destabilize an unequal state and make group equality possible, but the distributional and human capital effects of this depend on the demographic composition of the population. When the size of the initially disadvantaged group is sufficiently small, integration can lower the long-run costs of human capital investment in both groups and result in an increase the aggregate skill share. In contrast, when the initially disadvantaged group is large, integration can induce a fall in the aggregate skill share as the costs of human capital investment rise in both groups. We consider applications to concrete cases and policy implications. PMID:25554727

  2. 78 FR 41915 - Procurement List Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-12

    ... From the Federal Register Online via the Government Publishing Office COMMITTEE FOR PURCHASE FROM... Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the procurement list...: Comments must be received on or before: August 12, 2013. ADDRESSES: Committee for Purchase From People...

  3. 78 FR 73504 - Procurement List; Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-06

    ... From the Federal Register Online via the Government Publishing Office COMMITTEE FOR PURCHASE FROM... Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed Additions to the Procurement List... Received On or Before: 1/6/2014. ADDRESSES: Committee for Purchase From People Who Are Blind or...

  4. 5 CFR 841.1006 - Additional provisions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of the second month following the month in which it is received, but incurs no liability or... will issue an accounting. If the State finds this accounting unacceptable, it may then and only then... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Additional provisions. 841.1006...

  5. 77 FR 19262 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    ... received from a consulting firm noting that if this project goes out for a full food service contract, then... is for dining facility attendant--not a full food service contract. Accordingly, this project is... INFORMATION: Additions On 12/23/2011 (76 FR 80346), 1/6/2012 (77 FR 780) and 2/3/2012 (77 FR 5495-5496),...

  6. 75 FR 68328 - Procurement List; Proposed Addition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-05

    ... From the Federal Register Online via the Government Publishing Office COMMITTEE FOR PURCHASE FROM... Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed addition to the Procurement List... Received on or Before: 12/6/2010. ADDRESSES: Committee for Purchase From People Who Are Blind or...

  7. 76 FR 7824 - Procurement List; Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    ... From the Federal Register Online via the Government Publishing Office COMMITTEE FOR PURCHASE FROM... Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the Procurement List... Received On or Before: 3/14/2011. ADDRESSES: Committee for Purchase From People Who Are Blind or...

  8. 75 FR 33269 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ... Street, Boise, ID. NPA: Western Idaho Training Company, Caldwell, ID Contracting Activity: Dept of Trans... . SUPPLEMENTARY INFORMATION: Additions On 4/9/2010 (75 FR 18164-18165), the Committee for Purchase From People Who... contractor for the commodity or service. Comments were received from a commercial company that claims to...

  9. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  10. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  11. More Efficient Solar Thermal-Energy Receiver

    NASA Technical Reports Server (NTRS)

    Dustin, M. O.

    1987-01-01

    Thermal stresses and reradiation reduced. Improved design for solar thermal-energy receiver overcomes three major deficiencies of solar dynamic receivers described in literature. Concentrator and receiver part of solar-thermal-energy system. Receiver divided into radiation section and storage section. Concentrated solar radiation falls on boiling ends of heat pipes, which transmit heat to thermal-energy-storage medium. Receiver used in number of applications to produce thermal energy directly for use or to store thermal energy for subsequent use in heat engine.

  12. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III

    1979-01-01

    The angle tracking problems in microwave landing system receivers along with a receiver design capable of optimal performance in the multipath environments found in air terminal areas were studied. Included were various theoretical and evaluative studies like: (1) signal model development; (2) derivation of optimal receiver structures; and (3) development and use of computer simulations for receiver algorithm evaluation. The development of an experimental receiver for flight testing is presented. An overview of the work and summary of principal results and conclusions are reported.

  13. A minimalist approach to receiver architecture

    NASA Technical Reports Server (NTRS)

    Collins, O.

    1991-01-01

    New signal processing techniques are described for Deep Space Network radios and a proposed receiver architecture is presented, as well as experimental results on this new receiver's analog front end. The receiver's design employs direct downconversion rather than high speed digitization, and it is just as suitable for use as a space based probe relay receiver as it is for installation at a ground antenna. The advantages of having an inexpensive, shoe box size receiver, which could be carried around to antennas of opportunity, used for spacecraft testing or installed in the base of every antenna in a large array are the force behind this project.

  14. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  15. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  16. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  17. 47 CFR 36.605 - Calculation of safety net additive.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Calculation of safety net additive. 36.605... § 36.605 Calculation of safety net additive. (a) “Safety net additive support.” A rural incumbent local exchange carrier shall receive safety net additive support if it satisfies the conditions set forth...

  18. InterGroup Protocols

    2003-04-02

    Existing reliable ordered group communication protocols have been developed for local-area networks and do not in general scale well to a large number of nodes and wide-area networks. The InterGroup suite of protocols is a scalable group communication system that introduces an unusual approach to handling group membership, and supports a receiver-oriented selection of service. The protocols are intended for a wide-area network, with a large number of nodes, that has highly variable delays andmore » a high message loss rate, such as the Internet. The levels of the message delivery service range from unreliable unordered to reliable timestamp ordered.« less

  19. Aneuploidy in sperm of Hodgkin`s disease patients receiving NOVP chemotherapy

    SciTech Connect

    Robbins, W.A.; Cassel, M.J.; Wyrobek, A.J.

    1994-09-01

    Induction of genetic damage in germ cells of young patients receiving chemo- or radiotherapy for cancers with probable cure, such as Hodgkin`s disease, is cause for concern. These young patients may someday desire children, and germ cell alterations presenting as numerical chromosomal abnormalities in sperm may place their future offspring at risk. To address this concern, we measured aneuploidy in sperm from eight young Hodgkin`s disease patients: four pre-treatment, four during treatment, and three over a 45 month period following treatment with NOVP (Novantrone, Oncovin, Vinblastine and Prednisone). Patients ranged in stage of disease from IA-IIEB and none had received prior radiation or chemotherapy. Using multi-chromosome sperm FISH with repetitive sequence probes specific for chromosomes X, Y and 8, we found a significant 2-4 fold increase in particular numerical chromosomal abnormalities during treatment which were limited in persistence post-treatment. Additionally, pre-treatment Hodgkin`s disease patients showed elevations in some numerical chromosomal abnormalities when compared to a healthy reference group. In several men, the fraction of aneuploid sperm did not return to healthy reference group levels even after completion of therapy. These results show that elevated sperm aneuploidy occurs in germ cells of young cancer patients during chemotherapy and suggest caution to prevent conceptions during this period. The elevated sperm aneuploidy appears transient, but in some cases never returns to healthy reference group levels.

  20. Additional follow-up telephone counselling and initial smoking relapse: a longitudinal, controlled study

    PubMed Central

    Wu, Lei; He, Yao; Jiang, Bin; Zuo, Fang; Liu, Qinghui; Zhang, Li; Zhou, Changxi

    2016-01-01

    Objectives Smoking cessation services can help smokers to quit; however, many smoking relapse cases occur over time. Initial relapse prevention should play an important role in achieving the goal of long-term smoking cessation. Several studies have focused on the effect of extended telephone support in relapse prevention, but the conclusions remain conflicting. Design and setting From October 2008 to August 2013, a longitudinal, controlled study was performed in a large general hospital of Beijing. Participants The smokers who sought treatment at our smoking cessation clinic were non-randomised and divided into 2 groups: face-to-face individual counselling group (FC group), and face-to-face individual counselling plus telephone follow-up counselling group (FCF group). No pharmacotherapy was offered. Outcomes The timing of initial smoking relapse was compared between FC and FCF groups. Predictors of initial relapse were investigated during the first 180 days, using the Cox proportional hazards model. Results Of 547 eligible male smokers who volunteered to participate, 457 participants (117 in FC group and 340 in FCF group) achieved at least 24 h abstinence. The majority of the lapse episodes occurred during the first 2 weeks after the quit date. Smokers who did not receive the follow-up telephone counselling (FC group) tended to relapse to smoking earlier than those smokers who received the additional follow-up telephone counselling (FCF group), and the log-rank test was statistically significant (p=0.003). A Cox regression model showed that, in the FCF group, being married, and having a lower Fagerström test score, normal body mass index and doctor-diagnosed tobacco-related chronic diseases, were significantly independent protective predictors of smoking relapse. Conclusions Within the limitations of this study, it can be concluded that additional follow-up telephone counselling might be an effective strategy in preventing relapse. Further research is still

  1. Does isoniazid chemoprophylaxis increase the frequency of hepatotoxicity in patients receiving anti-TNF-α agent with a disease-modifying antirheumatic drug?

    PubMed Central

    Cansu, Döndü Üsküdar; Güncan, Sabri; Bilge, N. Şule Yaşar; Kaşifoğlu, Timuçin; Korkmaz, Cengiz

    2014-01-01

    Objective The aim of this study is to determine the incidence of isoniazid (INH)-related hepatotoxicity in patients with rheumatologic diseases receiving tumor necrosis factor-α (TNF-α) antagonists along with a disease-modifying antirheumatic drug (DMARD). Material and Methods We have retrospectively evaluated 87 patients receiving anti-TNFα agents who were followed up between June 2005 and February 2010 at our rheumatology department. Sixty-one of 87 patients have received INH prophylaxis for 9 months for latent tuberculosis infection. Results A total of 61 (70.1%) of 87 patients used INH prophylaxis (Group I), while the remaining 26 (29.9%) (Group II) had not; 53 patients had used any DMARD in Group I, while 21 patients had used in Group II. No significant differences were found among Group I and II with respect to clinical features. When two groups were compared, in Group I, elevations of liver enzymes were detected in five patients (8.1%) who had normal baseline values. Among these patients, hepatotoxicity developed in two patients. Hepatotoxicity developed one patient in Group II (p=0.85). Conclusion INH chemoprophylaxis was well tolerated in patients using anti-TNF-α agent and a DMARD. It seems not to be a strong risk factor for hepatotoxicity. However, comorbidities and other drugs used may be additional factors in the elevation of transaminases.

  2. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  3. 42 CFR 436.217 - Individuals receiving home and community-based services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Individuals receiving home and community-based... receiving home and community-based services. The agency may provide Medicaid to any group or groups of... if institutionalized. (b) In the absence of home and community-based services under a waiver...

  4. 42 CFR 435.217 - Individuals receiving home and community-based services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Individuals receiving home and community-based... receiving home and community-based services. The agency may provide Medicaid to any group or groups of... if institutionalized. (b) In the absence of home and community-based services under a waiver...

  5. Social effects of migration in receiving countries.

    PubMed

    Bergman, E

    1989-06-01

    Using a theoretical approach, this paper discusses the treatment of different aspects of the social effects of migration in receiving countries which centers around key issues such as ethnicity, discrimination, and the impact of general policy measures upon ethnic relations. Countries may be classified with respect to relations between ethnic groups in the following ways: 1) those that are either plural or multi-ethnic, 2) those consisting of mainly immigrants and their offspring, 3) those that have a fairly homogenous population and ethnic minorities resulting from post-war immigration, and 4) those that have a fairly homogenous population and 1 or more native minorities. International migration requires nations to formulate immigration, immigrant, and ethnic relations policies. Ethnic conflict often stems from a situation of need within competition for such facilities as education, housing, and employment. The underlying factors are mostly economic. The unequal distribution of influence and resources can be reduced by government policies designed to redistribute such influence and resources, and by providing better opportunities for individuals to gain influence and resources. Policy measures in the fields of general economic policy, labor market policy, housing policy, social policy, and educational policy probably affect ethnic relations more deeply than measures in the field of ethnic relations policy. Discrimination on ethnic, racial, or similar grounds is against the constitution of many countries. However, many difficulties arise in trying to use anti-discrimination laws in practice. Ethnicity is probably the most widespread cause of conflict in the world. The ethnic homogeneity of many countries has been reduced by the immigration of new ethnic elements. Can truly multicultural societies emerge from international migration? 3 possibilities exist: 1) unitary social systems will prevail where they 1st existed, 2) ethnic groups may segregate from each other

  6. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  7. Heat Pipe Solar Receiver for Oxygen Production of Lunar Regolith

    NASA Astrophysics Data System (ADS)

    Hartenstine, John R.; Anderson, William G.; Walker, Kara L.; Ellis, Michael C.

    2009-03-01

    A heat pipe solar receiver operating in the 1050° C range is proposed for use in the hydrogen reduction process for the extraction of oxygen from the lunar soil. The heat pipe solar receiver is designed to accept, isothermalize and transfer solar thermal energy to reactors for oxygen production. This increases the available area for heat transfer, and increases throughput and efficiency. The heat pipe uses sodium as the working fluid, and Haynes 230 as the heat pipe envelope material. Initial design requirements have been established for the heat pipe solar receiver design based on information from the NASA In-Situ Resource Utilization (ISRU) program. Multiple heat pipe solar receiver designs were evaluated based on thermal performance, temperature uniformity, and integration with the solar concentrator and the regolith reactor(s). Two designs were selected based on these criteria: an annular heat pipe contained within the regolith reactor and an annular heat pipe with a remote location for the reactor. Additional design concepts have been developed that would use a single concentrator with a single solar receiver to supply and regulate power to multiple reactors. These designs use variable conductance or pressure controlled heat pipes for passive power distribution management between reactors. Following the design study, a demonstration heat pipe solar receiver was fabricated and tested. Test results demonstrated near uniform temperature on the outer surface of the pipe, which will ultimately be in contact with the regolith reactor.

  8. Testing the Grandchildren's Received Affection Scale using Affection Exchange Theory.

    PubMed

    Mansson, Daniel H

    2013-04-01

    The purpose of this study was to test the Grandchildren's Received Affection Scale (GRAS) using Affection Exchange Theory (Floyd, 2006). In accordance with Affection Exchange Theory, it was hypothesized that grandchildren's scores on the Trait Affection Received Scale (i.e., the extent to which individuals by nature receive affection) would be related significantly and positively to their reports of received affection from their grandparents (i.e., their scores on the GRAS). Additionally, a research question was asked to explore if grandchildren's received affection from their grandparents is dependent on their grandparent's biological sex or lineage (i.e., maternal vs paternal). Thus, young adult grandchildren (N = 422) completed the GRAS and the Trait Affection Received Scale. The results of zero-order Pearson correlational analyses provided support for the hypothesis, whereas the results of MANOVAs tests only partially support extant grandparent-grandchild theory and research. These findings broaden the scope of Affection Exchange Theory and also bolster the GRAS's utility in future grandparent-grandchild affectionate communication research. PMID:23833883

  9. Testing the Grandchildren's Received Affection Scale using Affection Exchange Theory.

    PubMed

    Mansson, Daniel H

    2013-04-01

    The purpose of this study was to test the Grandchildren's Received Affection Scale (GRAS) using Affection Exchange Theory (Floyd, 2006). In accordance with Affection Exchange Theory, it was hypothesized that grandchildren's scores on the Trait Affection Received Scale (i.e., the extent to which individuals by nature receive affection) would be related significantly and positively to their reports of received affection from their grandparents (i.e., their scores on the GRAS). Additionally, a research question was asked to explore if grandchildren's received affection from their grandparents is dependent on their grandparent's biological sex or lineage (i.e., maternal vs paternal). Thus, young adult grandchildren (N = 422) completed the GRAS and the Trait Affection Received Scale. The results of zero-order Pearson correlational analyses provided support for the hypothesis, whereas the results of MANOVAs tests only partially support extant grandparent-grandchild theory and research. These findings broaden the scope of Affection Exchange Theory and also bolster the GRAS's utility in future grandparent-grandchild affectionate communication research.

  10. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  11. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  12. Integration Window Position Estimation in TR Receivers

    SciTech Connect

    Nekoogar, F; Dowla, F; Spiridon, A

    2005-03-15

    Transmitted-reference (TR) receivers avoid the stringent synchronization requirements that exist in conventional pulse detection schemes. However, the performance of such receivers is highly sensitive to precise timing acquisition and tracking as well as the length of their integration window. This window in TR receivers defines the limits of the finite integrator prior to the final decision making block. In this paper, we propose a novel technique that allows us to extract the timing information of the integration window very accurately in UWB-TR receivers in the presence of channel noise. The principles of the method are presented and the BER performance of a modified UWB-TR receiver is investigated by computer simulation. Our studies show that the proposed estimation technique adds value to the conventional TR receiver structure with modest increase in complexity.

  13. No Detectable Fertility Benefit from a Single Additional Mating in Wild Stalk-Eyed Flies

    PubMed Central

    Harley, Elisabeth; Fowler, Kevin; Cotton, Samuel

    2010-01-01

    Background Multiple mating by female insects is widespread, and the explanation(s) for repeated mating by females has been the subject of much discussion. Females may profit from mating multiply through direct material benefits that increase their own reproductive output, or indirect genetic benefits that increase offspring fitness. One particular direct benefit that has attracted significant attention is that of fertility assurance, as females often need to mate multiply to achieve high fertility. This hypothesis has never been tested in a wild insect population. Methodology/Principal Findings Female Malaysian stalk-eyed flies (Teleopsis dalmanni) mate repeatedly during their lifetime, and have been shown to be sperm limited under both laboratory and field conditions. Here we ask whether receiving an additional mating alleviates sperm limitation in wild females. In our experiment one group of females received a single additional mating, while a control group received an interrupted, and therefore unsuccessful, mating. Females that received an additional mating did not lay more fertilised eggs in total, nor did they lay proportionately more fertilised eggs. Female fertility declined significantly through time, demonstrating that females were sperm limited. However, receipt of an additional mating did not significantly alter the rate of this decline. Conclusions/Significance Our data suggest that the fertility consequences of a single additional mating were small. We discuss this effect (or lack thereof), and suggest that it is likely to be attributed to small ejaculate size, a high proportion of failed copulations, and the presence of X-linked meiotic drive in this species. PMID:21179210

  14. [Condition of protective intestinal microbiota populations under stress exposure in rats received different diets with bioactive food components].

    PubMed

    Markova, Yu M; Sidorova, Yu S

    2015-01-01

    The evaluation of the levels of major colon microbiota populations (lactobacilli, bifidobacteria, enterobacteria) was carried out in two 15-days experiments on Wistar rats, exposed to stress factor (electric shock) and fed with different diets with the addition of biologic active micronutrients [extract from the leaves of Serratula coronata L. and Enzymatic hydrolyzate of the mussels meat (EHMM)]. In the first experiment animals were fed with a common vivarium diet. In the experimental group the water extract from leaves of Serratula coronata L. as a phytoecdysteroid source (5 mg per 1 kg body weight) was added to water. In the second experiment rats received balanced semisynthetic diet. In the diet of the experimental group the part of the protein (casein) was replaced by the peptides from EHMM. During the experiment the animal body weight was measured. On the 14th day of the experiment the animals were subjected to stress stimulation [electrodermal stimulation on paws (electric current 0.4 mA for 8 seconds)]. On the last day of the experiment the animals were euthanized by decapitation and micro-ecological research of protective microbiota populations in the cecal contents was carried out. The relative body weight increase was recorded in both experiments. In the second experiment in animals receiving EHMM this index (68.2 ± 3.0%) was considerably higher than in the control group and in the experimental group receiving no EHMM (57.2 ± 4.0 and 59.7 ± 2.8% respectively). The results of the microecological study showed different effect of diets with biologically active micronutrients on the population levels of lactobacilli. In the experiment with common vivarium diet no significant changes of the levels of the studied colon microbiota populations had been recorded in the rats of control group compared with rats of experimental group, exposed to stress factor but received no extract from Serratula coronata L. The decrease of the levels of lactobacilli by the end

  15. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  16. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  17. RF subsystem design for microwave communication receivers

    NASA Astrophysics Data System (ADS)

    Bickford, W. J.; Brodsky, W. G.

    A system review of the RF subsystems of (IFF) transponders, tropscatter receivers and SATCOM receivers is presented. The quantity potential for S-band and X-band IFF transponders establishes a baseline requirement. From this, the feasibility of a common design for these and other receivers is evaluated. Goals are established for a GaAs MMIC (monolithic microwave integrated circuit) device and related local oscillator preselector and self-test components.

  18. Absolute flux density calibrations: Receiver saturation effects

    NASA Technical Reports Server (NTRS)

    Freiley, A. J.; Ohlson, J. E.; Seidel, B. L.

    1978-01-01

    The effect of receiver saturation was examined for a total power radiometer which uses an ambient load for calibration. Extension to other calibration schemes is indicated. The analysis shows that a monotonic receiver saturation characteristic could cause either positive or negative measurement errors, with polarity depending upon operating conditions. A realistic model of the receiver was made by using a linear-cubic voltage transfer characteristic. The evaluation of measurement error for this model provided a means for correcting radio source measurements.

  19. Costas loop analysis for coherent optical receivers

    NASA Astrophysics Data System (ADS)

    Hodgkinson, T. G.

    1986-03-01

    A homodyne Costas loop receiver is analyzed taking both shot and laser phase noise sources into acount. The reciever performance is compared with that of a heterodyne receiver using an electrical Costas loop and that of a coherent receiver using a pilot carrier phase-locked loop. It is shown that, to avoid large performance penalties, beat linewidth to bit-rate ratios smaller than 0.05 percent and 0.5 percent are needed for PSK homodyne and heterodyne systems, respectively.

  20. Speaking up in groups: a cross-level study of group voice climate and voice.

    PubMed

    Morrison, Elizabeth Wolfe; Wheeler-Smith, Sara L; Kamdar, Dishan

    2011-01-01

    Despite a growing body of research on employee voice—defined as the discretionary communication of ideas, suggestions, or opinions intended to improve organizational or unit functioning—the effects of shared or collective-level cognitions have received scant attention. There has also been relatively little research on voice within work groups. Our goal in this study was to address these important gaps by focusing on the effects of group-level beliefs about voice (i.e., group voice climate) on individual voice behavior within work groups. We conducted a cross-level investigation of voice behavior within 42 groups of engineers from a large chemical company. Consistent with our hypotheses, group voice climate was highly predictive of voice and explained variance beyond the effects of individual-level identification and satisfaction, and procedural justice climate. Also consistent with predictions, the effect of identification on voice was stronger in groups with favorable voice climates. These findings provide evidence that voice is shaped not just by individual attitudes and perceptions of the work context, as past research has shown, but also by group-level beliefs. The results also highlight the importance of broadening our conceptual models of voice to include shared cognitions and of conducting additional cross-level research on voice. PMID:20718517

  1. Speaking up in groups: a cross-level study of group voice climate and voice.

    PubMed

    Morrison, Elizabeth Wolfe; Wheeler-Smith, Sara L; Kamdar, Dishan

    2011-01-01

    Despite a growing body of research on employee voice—defined as the discretionary communication of ideas, suggestions, or opinions intended to improve organizational or unit functioning—the effects of shared or collective-level cognitions have received scant attention. There has also been relatively little research on voice within work groups. Our goal in this study was to address these important gaps by focusing on the effects of group-level beliefs about voice (i.e., group voice climate) on individual voice behavior within work groups. We conducted a cross-level investigation of voice behavior within 42 groups of engineers from a large chemical company. Consistent with our hypotheses, group voice climate was highly predictive of voice and explained variance beyond the effects of individual-level identification and satisfaction, and procedural justice climate. Also consistent with predictions, the effect of identification on voice was stronger in groups with favorable voice climates. These findings provide evidence that voice is shaped not just by individual attitudes and perceptions of the work context, as past research has shown, but also by group-level beliefs. The results also highlight the importance of broadening our conceptual models of voice to include shared cognitions and of conducting additional cross-level research on voice.

  2. Group Grammar

    ERIC Educational Resources Information Center

    Adams, Karen

    2015-01-01

    In this article Karen Adams demonstrates how to incorporate group grammar techniques into a classroom activity. In the activity, students practice using the target grammar to do something they naturally enjoy: learning about each other.

  3. Ceramic high temperature receiver design and tests

    NASA Technical Reports Server (NTRS)

    Davis, S. B.

    1982-01-01

    The High Temperature Solar Thermal Receiver, which was tested a Edwards AFB, CA during the winter of 1980-1981, evolved from technologies developed over a five year period of work. This receiver was tested at the Army Solar Furnace at White Sands, NM in 1976. The receiver, was tested successfully at 1768 deg F and showed thermal efficiencies of 85%. The results were sufficiently promising to lead ERDA to fund our development and test of a 250 kW receiver to measure the efficiency of an open cavity receiver atop a central tower of a heliostat field. This receiver was required to be design scalable to 10, 50, and 100 MW-electric sizes to show applicability to central power tower receivers. That receiver employed rectagular silicon carbide panels and vertical stanchions to achieve scalability. The construction was shown to be fully scalable; and the receiver was operated at temperatures up to 2000 deg F to achieve the performance goals of the experiment during tests at the GIT advanced components test facility during the fall of 1978.

  4. Ceramic high temperature receiver design and tests

    SciTech Connect

    Davis, S.B.

    1982-07-01

    The High Temperature Solar Thermal Receiver, which was tested a Edwards AFB, CA during the winter of 1980-1981, evolved from technologies developed over a five year period of work. This receiver was tested at the Army Solar Furnace at White Sands, NM in 1976. The receiver, was tested successfully at 1768 deg F and showed thermal efficiencies of 85%. The results were sufficiently promising to lead ERDA to fund our development and test of a 250 kW receiver to measure the efficiency of an open cavity receiver atop a central tower of a heliostat field. This receiver was required to be design scalable to 10, 50, and 100 MW-electric sizes to show applicability to central power tower receivers. That receiver employed rectangular silicon carbide panels and vertical stanchions to achieve scalability. The construction was shown to be fully scalable, and the receiver was operated at temperatures up to 2000 deg F to achieve the performance goals of the experiment during tests at the GIT advanced components test facility during the fall of 1978.

  5. False lock performance of quadriphase receivers

    NASA Technical Reports Server (NTRS)

    Simon, M. K.

    1979-01-01

    Quadriphase receivers, like biphase receivers, have the ability to false lock on a sideband on the data modulation. The theory associated with this phenomenon for receivers of binary phase-shift-keying (BPSK), using Costas loop demodulation, has recently been documented in the literature. This paper considers the corresponding theory for receivers of balanced quadriphase-shift-keying (QPSK) employing a quadriphase Costas loop (or equivalent fourth-power loop) for demodulation. Specific closed form expressions for false lock performance are developed and numerically evaluated for the particular case of single pole arm filters and an NRZ data format for each of the two statistically independent quadrature modulations.

  6. Nursing process approach improves receivables management.

    PubMed

    Dias, K; Stockamp, D

    1992-09-01

    The "nursing process" is a systematic decision-making approach to problem solving based on open-system theory. This theory assumes that there is an on-going interchange between all system components. Components cannot be viewed in isolation, because decisions regarding one component will affect other components. Receivables management is similar to the nursing process, in that it involves constant diagnosis, assessment, and intervention in the work in process during all phases of the receivables cycle. In experiments that applied the nursing process concept to the management of accounts receivable in several hospitals, gross days in accounts receivable were reduced and cash flow was increased. PMID:10145682

  7. Group Leader Development: Effects of Personal Growth and Psychoeducational Groups

    ERIC Educational Resources Information Center

    Ohrt, Jonathan H.; Robinson, E. H., III; Hagedorn, W. Bryce

    2013-01-01

    The purpose of this quasi-experimental study was to compare the effects of personal growth groups and psychoeducational groups on counselor education students' (n = 74) empathy and group leader self-efficacy. Additionally, we compared the degree to which participants in each group valued: (a) cohesion, (b) catharsis, and (c) insight. There were no…

  8. Optimization of receiver arrangements for passive emitter localization methods.

    PubMed

    Flückiger, M; Neild, A; Nelson, B J

    2012-03-01

    Passive localization of an object from its emission can be based on time difference of arrival or phase shift measurements for different receiver groups in sensor arrays. The accuracy of the localization primarily depends on accurate time and/or phase measurements. The frequency of the emission and the number and arrangement of the receivers mainly effect the resolution of the emitter localization. In this paper optimal receiver positions for passive localization methods are proposed, resulting in a maximal resolution for the emitter location estimate. The optimization is done by analyzing the uncertainty of the emitted signal, including its frequency. The technique has been developed specifically for ultrasound signals obtained from omnidirectional transducers, although the results apply for other application using passive localization techniques.

  9. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  10. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  11. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  12. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  13. Group dynamics.

    PubMed

    Scandiffio, A L

    1990-12-01

    Group dynamics play a significant role within any organization, culture, or unit. The important thing to remember with any of these structures is that they are made up of people--people with different ideas, motivations, background, and sometimes different agendas. Most groups, formal or informal, look for a leader in an effort to maintain cohesiveness of the unit. At times, that cultural bond must be developed; once developed, it must be nurtured. There are also times that one of the group no longer finds the culture comfortable and begins to act out behaviorally. It is these times that become trying for the leader as she or he attempts to remain objective when that which was once in the building phase of group cohesiveness starts to fall apart. At all times, the manager must continue to view the employee creating the disturbance as an integral part of the group. It is at this time that it is beneficial to perceive the employee exhibiting problem behaviors as a special employee, as one who needs the benefit of your experience and skills, as one who is still part of the group. It is also during this time that the manager should focus upon her or his own views in the area of power, communication, and the corporate culture of the unit that one has established before attempting to understand another's point of view. Once we understand our own motivation and accept ourselves, it is then that we may move on to offer assistance to another. Once we understand our insecurities recognizing staff dysfunction as a symptom of system dysfunction will not be so threatening to the concept of the manager that we perceive ourselves to be. It takes a secure person to admit that she or he favors staff before deciding to do something to change things. The important thing to know is that it can be done. The favored staff can find a new way of relating to others, the special employee can find new modes of behavior (and even find self-esteem in the process), the group can find new ways

  14. Coherent receiver employing nonlinear coherence detection for carrier tracking

    NASA Technical Reports Server (NTRS)

    Lindsey, W. C.; Simon, M. K. (Inventor)

    1974-01-01

    The concept of nonlinear coherence employed in carrier tracking to improve telecommunications efficiency is disclosed. A generic tracking loop for a coherent receiver is shown having seven principle feedback signals which may be selectively added and applied to a voltage controlled oscillator to produce a reference signal that is phase coherent with a received carrier. An eighth feedback signal whose nonrandom components are coherent with the phase detected and filtered carrier may also be added to exploit the sideband power of the received signal. A ninth feedback signal whose nonrandom components are also coherent with the quadrature phase detected and filtered carrier could be additionally or alternatively included in the composite feedback signal to the voltage controlled oscillator.

  15. No increased venous thromboembolism risk in Asian breast cancer patients receiving adjuvant tamoxifen.

    PubMed

    Chen, Tom Wei-Wu; Chen, Ho-Min; Lin, Ching-Hung; Huang, Chiun-Sheng; Cheng, Ann-Lii; Lai, Mei-Shu; Lu, Yen-Shen

    2014-11-01

    Tamoxifen is an effective endocrine treatment for early breast cancer (EBC) but increases the risk of venous thromboembolism. Whether Asian EBC patients (pts) bear the same risk when treated with adjuvant tamoxifen is uncertain. EBC pts diagnosed between 2004 and 2009 were selected from a population database in Taiwan. The pts were followed up from the index date to December 31, 2011 to collect events of deep vein thrombosis (DVT) and pulmonary embolism (PE). Cumulative incidence rates and hazard ratios (HRs) were used to compare the risk between pts treated with and without tamoxifen. In addition, comorbidities were included in an adjusted model of the risk of DVT and PE. A total of 28,029 EBC pts, including 17,843 (63.8 %) in the tamoxifen group and 10,155 (36.2 %) in the nontamoxifen group, were analyzed. The 7-year cumulative incidence rates for DVT and PE were 2.58 and 0.32 % in the tamoxifen group and 2.51 and 0.32 % in the nontamoxifen group (P = 0.92 for DVT, P = 0. 65 for PE), respectively. The HR for the nonadjusted and adjusted models showed no differences in DVT and PE risks between the tamoxifen and nontamoxifen groups. The uterine cancer risk was significantly increased in the pts receiving tamoxifen (adjusted HR = 2.79, P < 0.001), suggesting tamoxifen compliance. The risks of developing DVT and PE are not increased in Asian EBC pts receiving adjuvant tamoxifen. Ethnicity differences should be considered when discussing optimal endocrine treatments with EBC pts.

  16. Implementation of a MAP decoder for use in UMTS receivers

    NASA Astrophysics Data System (ADS)

    Habermann, Joachim

    2001-10-01

    Inter-user interference in mobile radio systems based on CDMA can be reduced with the aid of multi-user detection. As a consequence of the reduced interference the system capacity is increased for a given quality of service. The forthcoming UMTS system based on CDMA and FDD will apply long scrambling codes, thus, from a receiver implementation point of view random spreading codes are used. Random spreading codes, however, increase implementation complexity dramatically in a multi-user detection receiver. A receiver which shows both an acceptable implementation complexity and a bit error rate performance which is close to the single user bound, is the coded parallel interference cancellation (PIC) receiver. In principle, the coded PIC algorithm performs the following operations: after despreading and deinterleaving the receiver calculates soft values of the coded data with the aid of the maximum a posteriori (MAP) algorithm. The soft values are then respread and rechanneled. If all users are considered in the receiver, the multiple access interference can, ideally, be cancelled out. Through further stages in the receiver, i.e., doing the same procedure again, the performance of the single user receiver can approximately e obtained, as simulations have shown. In order to implement the coded PIC algorithm, its most complex component, which is the MAP decoder, has to be investigated in more detail. MAP decoding requires the calculation of probabilities and the storage over the entire data block because of a forward and backward recursion. These probabilities are obtained through multiplications and additions. To simplify the MAP algorithm on a large scale, conventionally the LOGMAP algorithm is used, which substitutes multiplications into additions with the aid of the logarithmic function and an additional correction function. To come up with a VHDL implementation of the LOGMAP algorithm, firstly a study into the bit resolution of a fixed point implementation is

  17. 29 CFR 1917.155 - Air receivers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Air receivers. 1917.155 Section 1917.155 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Related Terminal Operations and Equipment § 1917.155 Air receivers. (a) Application. This section applies to compressed...

  18. 7 CFR 1230.632 - Receiving ballots.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) Producers. A ballot shall be considered to be received on time if: (1) It was cast in-person in the county...; or (2) It was cast as an absentee ballot, having a postmarked date not later than the last day of the... day of the in-person voting period and was received in the FSA headquarters office in Washington,...

  19. 7 CFR 1230.632 - Receiving ballots.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) Producers. A ballot shall be considered to be received on time if: (1) It was cast in-person in the county...; or (2) It was cast as an absentee ballot, having a postmarked date not later than the last day of the... day of the in-person voting period and was received in the FSA headquarters office in Washington,...

  20. 7 CFR 1230.632 - Receiving ballots.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) Producers. A ballot shall be considered to be received on time if: (1) It was cast in-person in the county...; or (2) It was cast as an absentee ballot, having a postmarked date not later than the last day of the... day of the in-person voting period and was received in the FSA headquarters office in Washington,...

  1. 7 CFR 1230.632 - Receiving ballots.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) Producers. A ballot shall be considered to be received on time if: (1) It was cast in-person in the county...; or (2) It was cast as an absentee ballot, having a postmarked date not later than the last day of the... day of the in-person voting period and was received in the FSA headquarters office in Washington,...

  2. 7 CFR 1230.632 - Receiving ballots.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) Producers. A ballot shall be considered to be received on time if: (1) It was cast in-person in the county...; or (2) It was cast as an absentee ballot, having a postmarked date not later than the last day of the... day of the in-person voting period and was received in the FSA headquarters office in Washington,...

  3. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III; Irwin, S. H.; Padgett, J. E.

    1975-01-01

    A receiver is designed for aircraft (A/C), which, as a component of the proposed Microwave Landing System (MLS), is capable of optimal performance in the multipath environments found in air terminal areas. Topics discussed include: the angle-tracking problem of the MLS receiver; signal modeling; preliminary approaches to optimal design; suboptimal design; and simulation study.

  4. Liquid cooled fiber thermal radiation receiver

    DOEpatents

    Butler, Barry L.

    1987-01-01

    A radiation-to-thermal receiver apparatus for collecting radiation and converting it to thermal energy is disclosed. The invention includes a fibrous mat material which captures radiation striking the receiver. Captured radiation is removed from the fibrous mat material by a transparent fluid within which the material is bathed.

  5. Liquid cooled fiber thermal radiation receiver

    DOEpatents

    Butler, B.L.

    1985-03-29

    A radiation-to-thermal receiver apparatus for collecting radiation and converting it to thermal energy is disclosed. The invention includes a fibrous mat material which captures radiation striking the receiver. Captured radiation is removed from the fibrous mat material by a transparent fluid within which the material is bathed.

  6. Heat-Energy Analysis for Solar Receivers

    NASA Technical Reports Server (NTRS)

    Lansing, F. L.

    1982-01-01

    Heat-energy analysis program (HEAP) solves general heat-transfer problems, with some specific features that are "custom made" for analyzing solar receivers. Can be utilized not only to predict receiver performance under varying solar flux, ambient temperature and local heat-transfer rates but also to detect locations of hotspots and metallurgical difficulties and to predict performance sensitivity of neighboring component parameters.

  7. 47 CFR 80.1013 - Receiver.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1013 Receiver. The bridge-to-bridge receiver must be capable of reception of G3E emission on the navigational frequency...

  8. 47 CFR 80.1013 - Receiver.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1013 Receiver. The bridge-to-bridge receiver must be capable of reception of G3E emission on the navigational frequency...

  9. 47 CFR 80.1013 - Receiver.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Radiotelephone Installations Required by the Bridge-to-Bridge Act § 80.1013 Receiver. The bridge-to-bridge receiver must be capable of reception of G3E emission on the navigational frequency...

  10. 17 CFR 256.143 - Accounts receivable.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Accounts receivable. 256.143... SYSTEM OF ACCOUNTS FOR MUTUAL SERVICE COMPANIES AND SUBSIDIARY SERVICE COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 3. Current and Accrued Assets § 256.143 Accounts receivable. This account...

  11. 17 CFR 256.143 - Accounts receivable.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Accounts receivable. 256.143... SYSTEM OF ACCOUNTS FOR MUTUAL SERVICE COMPANIES AND SUBSIDIARY SERVICE COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 3. Current and Accrued Assets § 256.143 Accounts receivable. This account...

  12. 29 CFR 1910.169 - Air receivers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Compressed Gas and Compressed Air Equipment § 1910.169 Air receivers. (a) General requirements—(1) Application. This section applies to compressed air receivers, and other equipment used in providing and utilizing compressed air for performing operations such as...

  13. Advanced heat receiver conceptual design study

    NASA Technical Reports Server (NTRS)

    Kesseli, James; Saunders, Roger; Batchelder, Gary

    1988-01-01

    Solar Dynamic space power systems are candidate electrical power generating systems for future NASA missions. One of the key components of the solar dynamic power system is the solar receiver/thermal energy storage (TES) subsystem. Receiver development was conducted by NASA in the late 1960's and since then a very limited amount of work has been done in this area. Consequently the state of the art (SOA) receivers designed for the IOC space station are large and massive. The objective of the Advanced Heat Receiver Conceptual Design Study is to conceive and analyze advanced high temperature solar dynamic Brayton and Stirling receivers. The goal is to generate innovative receiver concepts that are half of the mass, smaller, and more efficient than the SOA. It is also necessary that these innovative receivers offer ease of manufacturing, less structural complexity and fewer thermal stress problems. Advanced Brayton and Stirling receiver storage units are proposed and analyzed in this study which can potentially meet these goals.

  14. 47 CFR 32.1170 - Receivables.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... enable the company to make the following analysis: (1) Amounts due from customers who are receiving... FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.1170 Receivables. (a) This account shall include all amounts due from customers for services rendered or billed and...

  15. 7 CFR 966.124 - Approved receiver.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Rules and..., as an approved receiver, tomatoes for purposes as set forth in § 966.120(a), shall annually, prior... specified purpose is to occur; (4) Whether or not the receiver packs, repacks or sells fresh tomatoes; (5)...

  16. 7 CFR 966.124 - Approved receiver.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Rules and..., as an approved receiver, tomatoes for purposes as set forth in § 966.120(a), shall annually, prior... specified purpose is to occur; (4) Whether or not the receiver packs, repacks or sells fresh tomatoes; (5)...

  17. 7 CFR 966.124 - Approved receiver.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Rules and..., as an approved receiver, tomatoes for purposes as set forth in § 966.120(a), shall annually, prior... specified purpose is to occur; (4) Whether or not the receiver packs, repacks or sells fresh tomatoes; (5)...

  18. 7 CFR 966.124 - Approved receiver.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Rules and..., as an approved receiver, tomatoes for purposes as set forth in § 966.120(a), shall annually, prior... specified purpose is to occur; (4) Whether or not the receiver packs, repacks or sells fresh tomatoes; (5)...

  19. 7 CFR 966.124 - Approved receiver.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Rules and..., as an approved receiver, tomatoes for purposes as set forth in § 966.120(a), shall annually, prior... specified purpose is to occur; (4) Whether or not the receiver packs, repacks or sells fresh tomatoes; (5)...

  20. 29 CFR 1917.155 - Air receivers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... transportation applications as railways, vehicles or cranes. (b) Gauges and valves. (1) Air receivers shall be equipped with indicating pressure gauges and spring-loaded safety valves. Safety valves shall prevent receiver pressure from exceeding 110 percent of the maximum allowable working pressure. (2) No other...

  1. OMEGA timing receiver, design and system test

    NASA Technical Reports Server (NTRS)

    Wilson, J. J.; Britt, J. E.; Chi, A.

    1972-01-01

    The design of a two frequency OMEGA Timing Receiver is discussed. The receiver tracks the arrival time of the signals by precise phase matching at the receiving antenna. Provision is made for inserting a propagation delay correction for each signal path. Time is measured as the difference between the zero crossing coincidence of the corrected signals and the local time. This number is displayed on the front panel in microseconds. The receiver can also function as a precise phase tracking receiver for collection of propagation data essential to augmenting the propagation corrections. All phase and time information is made available in a BCD format for flexibility in interfacing with other equipment. Results of preliminary tests using experimental transmissions are given. Preliminary results indicate time may be transferred by this technique to an accuracy of a few microseconds.

  2. EHF low-noise FET receiver

    NASA Technical Reports Server (NTRS)

    Schellenberg, J. M.; Watkins, E. T.

    1983-01-01

    Extremely high frequency (EHF) receivers for military and NASA programs must be small, lightweight, and highly reliable. In connection with recent advances in the development of mm-wave FET devices and circuits, a basis has been obtained for the eventual replacement of diode mixer front-ends by FET preamplifiers in receivers up to 94 GHz. By placing a low noise amplifier in front of the mixer it is possible to achieve a lower system noise figure than that found in conventional mm-wave receivers. A broader bandwidth can also be provided. Attention is given to the receiver configuration, a low noise FET amplifier, an image rejection filter, a dual-gate FET mixer, a FET local oscillator, and a FET receiver.

  3. Vitamin E measurement in patients receiving intravenous lipid emulsions.

    PubMed

    Henton, D H; Merritt, R J; Hack, S

    1992-01-01

    Two methods for the determination of plasma vitamin E--high-pressure liquid chromatography and spectrophotofluorometry--were compared on samples from four groups of pediatric patients: children and infants receiving lipid emulsion as part of their parenteral nutrition regimen, neonates receiving parenteral nutrition who were not receiving lipid emulsion at the time of blood sampling, and short admission surgery control subjects. In control subjects and patients not receiving lipid emulsions, both methods yielded similar results for vitamin E as alpha-tocopherol. In contrast, in patients receiving lipid emulsion, the fluorometric method yielded values ranging from 200% to 300% greater than did high-pressure liquid chromatography. The source of the discrepancy is most probably the presence of naturally occurring non-alpha-tocopherol isomers in the lipid products, which add to the fluorescent measurement but are resolved by high-pressure liquid chromatography. This study confirms clinically that fluorescent measurement of vitamin E is no longer the method of choice for monitoring tocopherol status in intensive care nurseries.

  4. Population pharmacokinetics of vancomycin in patients receiving extracorporeal membrane oxygenation

    PubMed Central

    Mulla, Hussain; Pooboni, Suneel

    2005-01-01

    Aims Extracorporeal membrane oxygenation (ECMO) is a life support system used during severe respiratory or cardiorespiratory failure. The objective of this study was to characterize the population pharmacokinetics of vancomycin during ECMO. Methods A population model was developed using WinNonMix (Version 2.0.1) from a total of 366 plasma observations in 45 patients, including term neonates, older children and adults. The study utilized both rich prospective and sparse retrospective data. Prospective samples were drawn at baseline and then 30, 60,90, 120, 180, 240, 300, 360 and 420 min postinfusion. Steady state concentrations were obtained retrospectively from an assay database, cross-referencing with the patients’ medical records. Results Data were examined using a two-compartment model with an additive and proportional residual error. Model fit improved substantially when clearance, CL (l kg−1 h−1) was modelled as a nonlinear function of serum creatinine (Cr) µmol l−1. There was a linear relationship between CL and age up to 1000 days: CL (Age < 1000 days) = [2.4 + 0.0018 × Age (days)]/Cr; CL (Age > 1000 days) = 4.3/Cr. Age also influenced central volume (V1) when included in the model as a dichotomous variable: V1 (Age < 4000 days) = 0.45 l kg−1; V1 (Age > 4000 days) = 0.36 l kg−1. Intercompartmental clearance and tissue volume were estimated to be 0.09 l kg−1 h−1 and 0.25 l kg−1, respectively. Model validation in a separate group of 20 patients revealed a bias of −7.7% and a precision of 26.7%. Conclusions The clearance of vancomycin was decreased and its volume of distribution increased in patients receiving ECMO, suggesting altered drug disposition during this treatment. PMID:16120065

  5. Overcoming the challenges of BeiDou receiver implementation.

    PubMed

    Bhuiyan, Mohammad Zahidul H; Söderholm, Stefan; Thombre, Sarang; Ruotsalainen, Laura; Kuusniemi, Heidi

    2014-01-01

    Global Navigation Satellite System (GNSS)-based positioning is experiencing rapid changes. The existing GPS and the GLONASS systems are being modernized to better serve the current challenging applications under harsh signal conditions. These modernizations include increasing the number of transmission frequencies and changes to the signal components. In addition, the Chinese BeiDou Navigation Satellite system (BDS) and the European Galileo are currently under development for global operation. Therefore, in view of these new upcoming systems the research and development of GNSS receivers has been experiencing a new upsurge. In this article, the authors discuss the main functionalities of a GNSS receiver in view of BDS. While describing the main functionalities of a software-defined BeiDou receiver, the authors also highlight the similarities and differences between the signal characteristics of the BeiDou B1 open service signal and the legacy GPS L1 C/A signal, as in general they both exhibit similar characteristics. In addition, the authors implement a novel acquisition technique for long coherent integration in the presence of NH code modulation in BeiDou D1 signal. Furthermore, a simple phase-preserved coherent integration based acquisition scheme is implemented for BeiDou GEO satellite acquisition. Apart from the above BeiDou-specific implementations, a novel Carrier-to-Noise-density ratio estimation technique is also implemented in the software receiver, which does not necessarily require bit synchronization prior to estimation. Finally, the authors present a BeiDou-only position fix with the implemented software-defined BeiDou receiver considering all three satellite constellations from BDS. In addition, a true multi-GNSS position fix with GPS and BDS systems is also presented while comparing their performances for a static stand-alone code phase-based positioning. PMID:25421735

  6. Overcoming the challenges of BeiDou receiver implementation.

    PubMed

    Bhuiyan, Mohammad Zahidul H; Söderholm, Stefan; Thombre, Sarang; Ruotsalainen, Laura; Kuusniemi, Heidi

    2014-11-21

    Global Navigation Satellite System (GNSS)-based positioning is experiencing rapid changes. The existing GPS and the GLONASS systems are being modernized to better serve the current challenging applications under harsh signal conditions. These modernizations include increasing the number of transmission frequencies and changes to the signal components. In addition, the Chinese BeiDou Navigation Satellite system (BDS) and the European Galileo are currently under development for global operation. Therefore, in view of these new upcoming systems the research and development of GNSS receivers has been experiencing a new upsurge. In this article, the authors discuss the main functionalities of a GNSS receiver in view of BDS. While describing the main functionalities of a software-defined BeiDou receiver, the authors also highlight the similarities and differences between the signal characteristics of the BeiDou B1 open service signal and the legacy GPS L1 C/A signal, as in general they both exhibit similar characteristics. In addition, the authors implement a novel acquisition technique for long coherent integration in the presence of NH code modulation in BeiDou D1 signal. Furthermore, a simple phase-preserved coherent integration based acquisition scheme is implemented for BeiDou GEO satellite acquisition. Apart from the above BeiDou-specific implementations, a novel Carrier-to-Noise-density ratio estimation technique is also implemented in the software receiver, which does not necessarily require bit synchronization prior to estimation. Finally, the authors present a BeiDou-only position fix with the implemented software-defined BeiDou receiver considering all three satellite constellations from BDS. In addition, a true multi-GNSS position fix with GPS and BDS systems is also presented while comparing their performances for a static stand-alone code phase-based positioning.

  7. Overcoming the Challenges of BeiDou Receiver Implementation

    PubMed Central

    Bhuiyan, Mohammad Zahidul H.; Söderholm, Stefan; Thombre, Sarang; Ruotsalainen, Laura; Kuusniemi, Heidi

    2014-01-01

    Global Navigation Satellite System (GNSS)-based positioning is experiencing rapid changes. The existing GPS and the GLONASS systems are being modernized to better serve the current challenging applications under harsh signal conditions. These modernizations include increasing the number of transmission frequencies and changes to the signal components. In addition, the Chinese BeiDou Navigation Satellite system (BDS) and the European Galileo are currently under development for global operation. Therefore, in view of these new upcoming systems the research and development of GNSS receivers has been experiencing a new upsurge. In this article, the authors discuss the main functionalities of a GNSS receiver in view of BDS. While describing the main functionalities of a software-defined BeiDou receiver, the authors also highlight the similarities and differences between the signal characteristics of the BeiDou B1 open service signal and the legacy GPS L1 C/A signal, as in general they both exhibit similar characteristics. In addition, the authors implement a novel acquisition technique for long coherent integration in the presence of NH code modulation in BeiDou D1 signal. Furthermore, a simple phase-preserved coherent integration based acquisition scheme is implemented for BeiDou GEO satellite acquisition. Apart from the above BeiDou-specific implementations, a novel Carrier-to-Noise-density ratio estimation technique is also implemented in the software receiver, which does not necessarily require bit synchronization prior to estimation. Finally, the authors present a BeiDou-only position fix with the implemented software-defined BeiDou receiver considering all three satellite constellations from BDS. In addition, a true multi-GNSS position fix with GPS and BDS systems is also presented while comparing their performances for a static stand-alone code phase-based positioning. PMID:25421735

  8. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  9. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  10. Wide-band coherent receiver development for enhanced surveillance

    SciTech Connect

    Simpson, M.L.; Richards, R.K.; Hutchinson, D.P.

    1998-03-01

    Oak Ridge National Laboratory (ORNL) has been developing advanced coherent IR heterodyne receivers for plasma diagnostics in fusion reactors for over 20 years. Recent progress in wide band IR detectors and high speed electronics has significantly enhanced the measurement capabilities of coherent receivers. In addition, developments in new HgCdTe and quantum well IR photodetector (QWIP) focal plane arrays are providing the possibility of both active and passive coherent imaging. In this paper the authors discuss the implications of these new enabling technologies to the IR remote sensing community for enhanced surveillance. Coherent receivers, as opposed to direct or thermal detection, provide multiple dimensions of information about a scene or target in a single detector system. Combinations of range, velocity, temperature, and chemical species information are all available from a coherent heterodyne receiver. They present laboratory data showing measured noise equivalent power (NEP) of new QWIP detectors with heterodyne bandwidths greater than 7 GHz. For absorption measurements, a wide band coherent receiver provides the capability of looking between CO{sub 2} lines at off-resonance peaks and thus the measurement of lines normally inaccessible with conventional heterodyne or direct detection systems. Also described are differential absorption lidar (DIAL) and Doppler laboratory measurements using an 8 x 8 HgCdTe focal plane array demonstrating the snapshot capability of coherent receiver detector arrays for enhanced chemical plume and moving hardbody capture. Finally they discuss a variety of coherent receiver configurations that can suppress (or enhance) sensitivity of present active remote sensing systems to speckle, glint, and other measurement anomalies.

  11. Group Learning.

    ERIC Educational Resources Information Center

    Black, Susan

    1992-01-01

    Research suggests that cooperative learning works best when students are first taught group-processing skills, such as leadership, decision making, communication, trust building, and conflict management. Inadequate teacher training and boring assignments can torpedo cooperative learning efforts. Administrators should reassure teachers with…

  12. Performance Assessment of Two GPS Receivers on Space Shuttle

    NASA Technical Reports Server (NTRS)

    Schroeder, Christine A.; Schutz, Bob E.

    1996-01-01

    Space Shuttle STS-69 was launched on September 7, 1995, carrying the Wake Shield Facility (WSF-02) among its payloads. The mission included two GPS receivers: a Collins 3M receiver onboard the Endeavour and an Osborne flight TurboRogue, known as the TurboStar, onboard the WSF-02. Two of the WSF-02 GPS Experiment objectives were to: (1) assess the ability to use GPS in a relative satellite positioning mode using the receivers on Endeavour and WSF-02; and (2) assess the performance of the receivers to support high precision orbit determination at the 400 km altitude. Three ground tests of the receivers were conducted in order to characterize the respective receivers. The analysis of the tests utilized the Double Differencing technique. A similar test in orbit was conducted during STS-69 while the WSF-02 was held by the Endeavour robot arm for a one hour period. In these tests, biases were observed in the double difference pseudorange measurements, implying that biases up to 140 m exist which do not cancel in double differencing. These biases appear to exist in the Collins receiver, but their effect can be mitigated by including measurement bias parameters to accommodate them in an estimation process. An additional test was conducted in which the orbit of the combined Endeavour/WSF-02 was determined independently with each receiver. These one hour arcs were based on forming double differences with 13 TurboRogue receivers in the global IGS network and estimating pseudorange biases for the Collins. Various analyses suggest the TurboStar overall orbit accuracy is about one to two meters for this period, based on double differenced phase residuals of 34 cm. These residuals indicate the level of unmodeled forces on Endeavour produced by gravitational and nongravitational effects. The rms differences between the two independently determined orbits are better than 10 meters, thereby demonstrating the accuracy of the Collins-determined orbit at this level as well as the

  13. Health numeracy: perspectives about using numbers in health management from African American patients receiving dialysis.

    PubMed

    Wright Nunes, Julie A; Osborn, Chandra Y; Ikizler, T Alp; Cavanaugh, Kerri L

    2015-04-01

    Health numeracy is linked to important clinical outcomes. Kidney disease management relies heavily on patient numeracy skills across the continuum of kidney disease care. Little data are available eliciting stakeholder perspectives from patients receiving dialysis about the construct of health numeracy. Using focus groups, we asked patients receiving hemodialysis open-ended questions to identify facilitators and barriers to their understanding, interpretation, and application of numeric information in kidney care. Transcripts were analyzed using content analysis. Twelve patients participated with a mean (standard deviation) age of 56 (12) years. All were African American, 50% were women, and 83% had an annual income <$20,000/year. Although patients felt numbers were critical to every aspect in life, they noted several barriers to understanding, interpreting and applying quantitative information specifically to manage their health. Low patient self-efficacy related to health numeracy and limited patient-provider communication about quantitatively based feedback, were emphasized as key barriers. Through focus groups of key patient stakeholders we identified important modifiable barriers to effective kidney care. Additional research is needed to develop tools that support numeracy-sensitive education and communication interventions in dialysis. PMID:25358522

  14. Temperature influences in receiver clock modelling

    NASA Astrophysics Data System (ADS)

    Wang, Kan; Meindl, Michael; Rothacher, Markus; Schoenemann, Erik; Enderle, Werner

    2016-04-01

    In Precise Point Positioning (PPP), hardware delays at the receiver site (receiver, cables, antenna, …) are always difficult to be separated from the estimated receiver clock parameters. As a result, they are partially or fully contained in the estimated "apparent" clocks and will influence the deterministic and stochastic modelling of the receiver clock behaviour. In this contribution, using three years of data, the receiver clock corrections of a set of high-precision Hydrogen Masers (H-Masers) connected to stations of the ESA/ESOC network and the International GNSS Service (IGS) are firstly characterized concerning clock offsets, drifts, modified Allan deviations and stochastic parameters. In a second step, the apparent behaviour of the clocks is modelled with the help of a low-order polynomial and a known temperature coefficient (Weinbach, 2013). The correlations between the temperature and the hardware delays generated by different types of antennae are then analysed looking at daily, 3-day and weekly time intervals. The outcome of these analyses is crucial, if we intend to model the receiver clocks in the ground station network to improve the estimation of station-related parameters like coordinates, troposphere zenith delays and ambiguities. References: Weinbach, U. (2013) Feasibility and impact of receiver clock modeling in precise GPS data analysis. Dissertation, Leibniz Universität Hannover, Germany.

  15. Terahertz Array Receivers with Integrated Antennas

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Goutam; Llombart, Nuria; Lee, Choonsup; Jung, Cecile; Lin, Robert; Cooper, Ken B.; Reck, Theodore; Siles, Jose; Schlecht, Erich; Peralta, Alessandro; Thomas, Bertrand; Mehdi, Imran

    2011-01-01

    Highly sensitive terahertz heterodyne receivers have been mostly single-pixel. However, now there is a real need of multi-pixel array receivers at these frequencies driven by the science and instrument requirements. In this paper we explore various receiver font-end and antenna architectures for use in multi-pixel integrated arrays at terahertz frequencies. Development of wafer-level integrated terahertz receiver front-end by using advanced semiconductor fabrication technologies has progressed very well over the past few years. Novel stacking of micro-machined silicon wafers which allows for the 3-dimensional integration of various terahertz receiver components in extremely small packages has made it possible to design multi-pixel heterodyne arrays. One of the critical technologies to achieve fully integrated system is the antenna arrays compatible with the receiver array architecture. In this paper we explore different receiver and antenna architectures for multi-pixel heterodyne and direct detector arrays for various applications such as multi-pixel high resolution spectrometer and imaging radar at terahertz frequencies.

  16. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  17. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  18. Dunne receives 2011 G. K. Gilbert Award: Citation

    NASA Astrophysics Data System (ADS)

    Dietrich, William E.

    2012-06-01

    Thomas Dunne received the 2011 G. K. Gilbert Award at the 2011 AGU Fall Meeting, held 5-9 December in San Francisco, Calif. The award recognizes “a scientist who has either made a single significant advance or sustained significant contributions to the field of Earth and planetary surface processes, and who has in addition promoted an environment of unselfish cooperation in research and the inclusion of young scientists into the field.”

  19. Dunne receives 2011 G. K. Gilbert Award: Response

    NASA Astrophysics Data System (ADS)

    Dunne, Thomas

    2012-06-01

    Thomas Dunne received the 2011 G. K. Gilbert Award at the 2011 AGU Fall Meeting, held 5-9 December in San Francisco, Calif. The award recognizes “a scientist who has either made a single significant advance or sustained significant contributions to the field of Earth and planetary surface processes, and who has in addition promoted an environment of unselfish cooperation in research and the inclusion of young scientists into the field.”

  20. Dietrich receives 2010 G. K. Gilbert Award: Citation

    NASA Astrophysics Data System (ADS)

    Howard, Alan D.

    2011-06-01

    William E. Dietrich received the 2010 G. K. Gilbert Award at the 2010 AGU Fall Meeting, held 13-17 December in San Francisco, Calif. The award recognizes “a scientist who has either made a single significant advance or sustained significant contributions to the field of Earth and planetary surface processes, and who has in addition promoted an environment of unselfish cooperation in research and the inclusion of young scientists into the field.”

  1. Dietrich receives 2010 G. K. Gilbert Award: Response

    NASA Astrophysics Data System (ADS)

    Dietrich, William E.

    2011-06-01

    William E. Dietrich received the 2010 G. K. Gilbert Award at the 2010 AGU Fall Meeting, held 13-17 December in San Francisco, Calif. The award recognizes “a scientist who has either made a single significant advance or sustained significant contributions to the field of Earth and planetary surface processes, and who has in addition promoted an environment of unselfish cooperation in research and the inclusion of young scientists into the field.”

  2. TriG: Next Generation Scalable Spaceborne GNSS Receiver

    NASA Technical Reports Server (NTRS)

    Tien, Jeffrey Y.; Okihiro, Brian Bachman; Esterhuizen, Stephan X.; Franklin, Garth W.; Meehan, Thomas K.; Munson, Timothy N.; Robison, David E.; Turbiner, Dmitry; Young, Lawrence E.

    2012-01-01

    TriG is the next generation NASA scalable space GNSS Science Receiver. It will track all GNSS and additional signals (i.e. GPS, GLONASS, Galileo, Compass and Doris). Scalable 3U architecture and fully software and firmware recofigurable, enabling optimization to meet specific mission requirements. TriG GNSS EM is currently undergoing testing and is expected to complete full performance testing later this year.

  3. The Los Alamos beacon receiver array

    SciTech Connect

    Carlos, R.C.; Massey, R.S. )

    1994-07-01

    The authors are interested in studying both the natural background of acoustic and acoustic-gravity waves, for which the sources are not generally known, as well as waves produced by known sources such as large explosions and launches of large rockets. The authors describe radio receivers that monitor transmissions from beacons on geosynchronous satellites. The receivers can detect perturbations of a 300--3,000 s period in the electron density integrated from beacon to receiver, for amplitudes as low as (1--2) [times] 10[sup 13] m[sup [minus]2]. Data are used in studies of atmospheric acoustic and acoustic-gravity waves.

  4. Global Positioning System receiver evaluation results

    SciTech Connect

    Byrne, R.H.

    1993-09-01

    A Sandia project currently uses an outdated Magnavox 6400 Global Positioning System (GPS) receiver as the core of its navigation system. The goal of this study was to analyze the performance of the current GPS receiver compared to newer, less expensive models and to make recommendations on how to improve the performance of the overall navigation system. This paper discusses the test methodology used to experimentally analyze the performance of different GPS receivers, the test results, and recommendations on how an upgrade should proceed. Appendices contain detailed information regarding the raw data, test hardware, and test software.

  5. Comparison of Auditory Perception in Cochlear Implanted Children with and without Additional Disabilities

    PubMed Central

    Hashemi, Seyed Basir; Monshizadeh, Leila

    2016-01-01

    Background: The number of children with cochlear implants who have other difficulties such as attention deficiency and cerebral palsy has increased dramatically. Despite the need for information on the results of cochlear implantation in this group, the available literature is extremely limited. We, therefore, sought to compare the levels of auditory perception in children with cochlear implants with and without additional disabilities. Methods: A spondee test comprising 20 two-syllable words was performed. The data analysis was done using SPSS, version 19. Results: Thirty-one children who had received cochlear implants 2 years previously and were at an average age of 7.5 years were compared via the spondee test. From the 31 children, 15 had one or more additional disabilities. The data analysis indicated that the mean score of auditory perception in this group was approximately 30 scores below that of the children with cochlear implants who had no additional disabilities. Conclusion: Although there was an improvement in the auditory perception of all the children with cochlear implants, there was a noticeable difference in the level of auditory perception between those with and without additional disabilities. Deafness and additional disabilities depended the children on lip reading alongside the auditory ways of communication. In addition, the level of auditory perception in the children with cochlear implants who had more than one additional disability was significantly less than that of the other children with cochlear implants who had one additional disability. PMID:27217602

  6. Local Group

    NASA Astrophysics Data System (ADS)

    Mateo, M.; Murdin, P.

    2000-11-01

    Not long after EDWIN HUBBLE established that galaxies are `island universes' similar to our home galaxy, the MILKY WAY, he realized that a few of these external galaxies are considerably closer to us than any others. In 1936 he first coined the term `Local Group' in his famous book The Realm of the Nebulae to identify our nearest galactic neighbors. More than 60 yr later, the galaxies of the Loca...

  7. Underrepresented groups

    NASA Technical Reports Server (NTRS)

    Peters, David A.

    1990-01-01

    The problem with the shortage of under represented groups in science and engineering is absolutely crucial, especially considering that U.S. will experience a shortage of 560,000 science and engineering personnel by the year 2010. Most studies by the National Science Foundation also concluded that projected shortages cannot be alleviated without significant increases in the involvement of Blacks, Hispanics, Native Americans, handicapped persons, and women.

  8. 7 CFR 1455.21 - Additional responsibilities of grantee.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... HABITAT INCENTIVE PROGRAM § 1455.21 Additional responsibilities of grantee. (a) Before receiving grant... grant amount reduced by 25 percent if opening dates for migratory bird hunting in the State are...

  9. 47 CFR 80.858 - Radiotelephone receiver.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... frequencies authorized pursuant to § 80.855(a). (b) One or more loudspeakers capable of being used to maintain... receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a signal-to-noise...

  10. 47 CFR 80.913 - Radiotelephone receivers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... public coast stations serving the area in which the vessel is navigated. (d) One or more loudspeakers... at the receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a...

  11. 47 CFR 80.913 - Radiotelephone receivers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... public coast stations serving the area in which the vessel is navigated. (d) One or more loudspeakers... at the receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a...

  12. 47 CFR 80.858 - Radiotelephone receiver.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... frequencies authorized pursuant to § 80.855(a). (b) One or more loudspeakers capable of being used to maintain... receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a signal-to-noise...

  13. 47 CFR 80.858 - Radiotelephone receiver.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... frequencies authorized pursuant to § 80.855(a). (b) One or more loudspeakers capable of being used to maintain... receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a signal-to-noise...

  14. 47 CFR 80.913 - Radiotelephone receivers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... public coast stations serving the area in which the vessel is navigated. (d) One or more loudspeakers... at the receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a...

  15. 47 CFR 80.858 - Radiotelephone receiver.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... frequencies authorized pursuant to § 80.855(a). (b) One or more loudspeakers capable of being used to maintain... receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a signal-to-noise...

  16. 47 CFR 80.913 - Radiotelephone receivers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... public coast stations serving the area in which the vessel is navigated. (d) One or more loudspeakers... at the receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a...

  17. 47 CFR 80.913 - Radiotelephone receivers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... public coast stations serving the area in which the vessel is navigated. (d) One or more loudspeakers... at the receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a...

  18. 47 CFR 80.858 - Radiotelephone receiver.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... frequencies authorized pursuant to § 80.855(a). (b) One or more loudspeakers capable of being used to maintain... receiver input to produce an audio output of 50 milliwatts to the loudspeaker with a signal-to-noise...

  19. Collector/Receiver Characterization (Fact Sheet)

    SciTech Connect

    Not Available

    2010-08-01

    Fact sheet describing NREL CSP Program capabilities for collector/receiver characterization: determining optical efficiency, measuring heat loss, developing and testing concentrators, concentrating the sun's power, and optically characterizing CSP plants.

  20. 21 CFR 1020.10 - Television receivers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... components of the receiver except that portion of the neck and socket of the cathode-ray tube which normally... of a circuit or shield component. The warning label shall include the specification of operating...

  1. First Public Library Satellite Receiver System.

    ERIC Educational Resources Information Center

    Donaldson, Marion F.

    1982-01-01

    Description of video services at Lake County Public Library, Indiana, highlights the installation of a satellite receiver system and notes funding and justification, components of a satellite system, decisions and sources of assistance, programming available, and future considerations. (EJS)

  2. Digital Signal Processing Based Biotelemetry Receivers

    NASA Technical Reports Server (NTRS)

    Singh, Avtar; Hines, John; Somps, Chris

    1997-01-01

    This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

  3. A C-Band satellite receiver

    NASA Astrophysics Data System (ADS)

    Lupinetti, F.; Ingels, F.

    1985-12-01

    The design concept of a 24-channel C-band receiver for satellite TV signals is presented. The system comprises a low-noise amplifier, a 3.7-4.2-GHz/450-910-MHz block down converter, the receiver proper (a modified analog UNF tuner at IF = 45 MHz and a digital channel selector), and an RF modulator providing video and audio on channels 3 or 4. The operation of the receiver is described and illustrated with block diagrams and tables of specifications. A prototype receiver has been found to give good video quality and definition with clear 20-20,000-Hz audio when used with a 4-ft dish antenna.

  4. 49 CFR 236.788 - Receiver.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.788 Receiver. A device on a locomotive, so placed that it is in position to be influenced inductively or actuated by...

  5. NASA Dryden Receives 'New' F-15Ds

    NASA Video Gallery

    NASA's Dryden Flight Research Center has received three F-15D Eagle aircraft from the U.S. Air Force for flight research and mission support duties. The demilitarized high-performance aircraft were...

  6. High dynamic GPS receiver validation demonstration

    NASA Technical Reports Server (NTRS)

    Hurd, W. J.; Statman, J. I.; Vilnrotter, V. A.

    1985-01-01

    The Validation Demonstration establishes that the high dynamic Global Positioning System (GPS) receiver concept developed at JPL meets the dynamic tracking requirements for range instrumentation of missiles and drones. It was demonstrated that the receiver can track the pseudorange and pseudorange rate of vehicles with acceleration in excess of 100 g and jerk in excess of 100 g/s, dynamics ten times more severe than specified for conventional High Dynamic GPS receivers. These results and analytic extensions to a complete system configuration establish that all range instrumentation requirements can be met. The receiver can be implemented in the 100 cu in volume required by all missiles and drones, and is ideally suited for transdigitizer or translator applications.

  7. Stanley receives 2010 William Gilbert Award: Citation

    NASA Astrophysics Data System (ADS)

    Weiss, Benjamin P.

    2011-06-01

    Sabine Stanley received the William Gilbert Award at the 2010 AGU Fall Meeting, held 13-17 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  8. Kirschvink receives 2011 William Gilbert Award: Citation

    NASA Astrophysics Data System (ADS)

    Weiss, Benjamin P.

    2012-04-01

    Joseph Kirschvink received the William Gilbert Award at the 2011 AGU Fall Meeting, held 5-9 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  9. Kirschvink receives 2011 William Gilbert Award: Response

    NASA Astrophysics Data System (ADS)

    Kirschvink, Joseph L.

    2012-04-01

    Joseph Kirschvink received the William Gilbert Award at the 2011 AGU Fall Meeting, held 5-9 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  10. Dennis Kent Receives 2009 William Gilbert Award

    NASA Astrophysics Data System (ADS)

    Tauxe, Lisa; Kent, Dennis

    2010-06-01

    Dennis Kent received the William Gilbert Award at the 2009 AGU Fall Meeting, held 14-18 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  11. Lagroix Receives 2008 William Gilbert Award

    NASA Astrophysics Data System (ADS)

    Moskowitz, Bruce M.; Banerjee, Subir K.; Lagroix, France

    2009-04-01

    France Lagroix received the William Gilbert Award at the 2008 AGU Fall Meeting Honors Ceremony, held 17 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  12. Stanley receives 2010 William Gilbert Award: Response

    NASA Astrophysics Data System (ADS)

    Stanley, Sabine

    2011-06-01

    Sabine Stanley received the William Gilbert Award at the 2010 AGU Fall Meeting, held 13-17 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.

  13. Go International! Build a Simplified Shortwave Receiver

    ERIC Educational Resources Information Center

    Homoly, Clarke

    2008-01-01

    This article presents a plan for building a shortwave receiver that is doable, educational and has reasonable performance. The project, says the author, can give students years of listening fun without a major financial investment. Potential project improvements are included.

  14. 47 CFR 32.1170 - Receivables.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.1170 Receivables. (a... of interest accrued to the date of the balance sheet on bonds, notes, and other commercial...

  15. Solar central receiver systems comparative economics

    SciTech Connect

    Eicker, P J

    1980-04-01

    Several major conceptual design studies of solar central receiver systems and components have been completed in the last year. The results of these studies are used to compare the projected cost of electric power generation using central receiver systems with that of more conventional power generation. The cost estimate for a molten salt central receiver system is given. Levelized busbar energy cost is shown as a function of annual capacity factor indicating the fraction of the cost due to each of the subsystems. The estimated levelized busbar energy cost for a central receiver (70 to 90 mills per kilowatt hour) is compared with the levelized busbar energy cost for a new coal fired Rankine cycle plant. Sensitivities to the initial cost of coal and the delta fuel escalation are shown. (WHK)

  16. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  17. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  18. Comparing Drug Use between Welfare-Receiving Arrestees and Non-Welfare-Receiving Arrestees.

    ERIC Educational Resources Information Center

    Yacoubian, George S., Jr.; Peters, Ronald J., Jr.; Urbach, Blake J.; Johnson, Regina J.

    2002-01-01

    Compares drug-positive rates between welfare-receiving arrestees, non-welfare receiving arrestees living below the poverty level, and non-welfare arrestees living above the poverty level. Welfare-receiving arrestees were more likely to be female, older, less educated, and to test positive for opiates and benzodiazepines than the other subgroups.…

  19. Flexible receiver adapter formal design review

    SciTech Connect

    Krieg, S.A.

    1995-06-13

    This memo summarizes the results of the Formal (90%) Design Review process and meetings held to evaluate the design of the Flexible Receiver Adapters, support platforms, and associated equipment. The equipment is part of the Flexible Receiver System used to remove, transport, and store long length contaminated equipment and components from both the double and single-shell underground storage tanks at the 200 area tank farms.

  20. Single-Receiver GPS Phase Bias Resolution

    NASA Technical Reports Server (NTRS)

    Bertiger, William I.; Haines, Bruce J.; Weiss, Jan P.; Harvey, Nathaniel E.

    2010-01-01

    Existing software has been modified to yield the benefits of integer fixed double-differenced GPS-phased ambiguities when processing data from a single GPS receiver with no access to any other GPS receiver data. When the double-differenced combination of phase biases can be fixed reliably, a significant improvement in solution accuracy is obtained. This innovation uses a large global set of GPS receivers (40 to 80 receivers) to solve for the GPS satellite orbits and clocks (along with any other parameters). In this process, integer ambiguities are fixed and information on the ambiguity constraints is saved. For each GPS transmitter/receiver pair, the process saves the arc start and stop times, the wide-lane average value for the arc, the standard deviation of the wide lane, and the dual-frequency phase bias after bias fixing for the arc. The second step of the process uses the orbit and clock information, the bias information from the global solution, and only data from the single receiver to resolve double-differenced phase combinations. It is called "resolved" instead of "fixed" because constraints are introduced into the problem with a finite data weight to better account for possible errors. A receiver in orbit has much shorter continuous passes of data than a receiver fixed to the Earth. The method has parameters to account for this. In particular, differences in drifting wide-lane values must be handled differently. The first step of the process is automated, using two JPL software sets, Longarc and Gipsy-Oasis. The resulting orbit/clock and bias information files are posted on anonymous ftp for use by any licensed Gipsy-Oasis user. The second step is implemented in the Gipsy-Oasis executable, gd2p.pl, which automates the entire process, including fetching the information from anonymous ftp

  1. A handbook for solar central receiver design

    SciTech Connect

    Falcone, P.K.

    1986-12-01

    This Handbook describes central receiver technology for solar thermal power plants. It contains a description and assessment of the major components in a central receiver system configured for utility scale production of electricity using Rankine-cycle steam turbines. It also describes procedures to size and optimize a plant and discussed examples from recent system analyses. Information concerning site selection criteria, cost estimation, construction, and operation and maintenance is also included, which should enable readers to perform design analyses for specific applications.

  2. Testing the Susceptibility of GNSS Receivers to Radio Frequency Interference

    NASA Astrophysics Data System (ADS)

    Berglund, H. T.; Blume, F.; Gallaher, W. W.

    2015-12-01

    Global Navigational Satellite Systems (GNSS) receivers are employed by the scientific community for measuring a variety of geodetic, geophysical and atmospheric phenomena. Data acquisition frequently occurs in a variety of challenging environments, which include locations with high Radio Frequency (RF) noise characteristics. Tracking the relatively low powered GNSS carrier signals broadcast from space becomes even more challenging in the presence of adjacent band RF noise. The demand for terrestrial RF spectrum use for a variety of non-GNSS applications is ever increasing, which poses potential challenges for GNSS site operators who would like to acquire the highest quality data possible. In recent years, UNAVCO has observed an increase in the number of GNSS sites which are negatively impacted by RF interference. In previous work, we have shown that telemetry systems utilizing the Iridium satellite constellation can degrade GNSS data quality, as the adjacent-band (1610-1616 Mhz) signals transmitted by Iridium data transmitters are close in proximity to the L1 frequency of GNSS. The impact of RF interference from Iridium data transmitters on GNSS receivers can cause reduced Signal-to-Noise (SNR), increased cycle slips, and in worst case scenarios, prevent the receiver from tracking. To better characterize GNSS receiver susceptibility to RF interference, UNAVCO has performed a variety of tests with Continuous Wave (CW) noise sources in RF bands adjacent to the GNSS spectrum. We simulate a subset of discrete noise frequencies commonly observed in the field using a frequency generator, which supplies a signal with varying power output from a transmitter located within 1 m of the GNSS antenna. Signal power is incremented in small steps until receiver tracking fails. All receivers are simultaneously evaluated using an 8-way splitter. In addition, we investigate receiver tracking performance with a simulated increase in the RF noise floor. To analyze the results we use

  3. Adaptive Detector Arrays for Optical Communications Receivers

    NASA Technical Reports Server (NTRS)

    Vilnrotter, V.; Srinivasan, M.

    2000-01-01

    The structure of an optimal adaptive array receiver for ground-based optical communications is described and its performance investigated. Kolmogorov phase screen simulations are used to model the sample functions of the focal-plane signal distribution due to turbulence and to generate realistic spatial distributions of the received optical field. This novel array detector concept reduces interference from background radiation by effectively assigning higher confidence levels at each instant of time to those detector elements that contain significant signal energy and suppressing those that do not. A simpler suboptimum structure that replaces the continuous weighting function of the optimal receiver by a hard decision on the selection of the signal detector elements also is described and evaluated. Approximations and bounds to the error probability are derived and compared with the exact calculations and receiver simulation results. It is shown that, for photon-counting receivers observing Poisson-distributed signals, performance improvements of approximately 5 dB can be obtained over conventional single-detector photon-counting receivers, when operating in high background environments.

  4. Low-temperature volumetric receiver concept

    NASA Astrophysics Data System (ADS)

    Drost, M. K.

    1988-09-01

    This document describes an alternative solar central receiver concept that offers the potential for a substantial reduction in the cost of electrical energy. The concept consists of a low temperature volumetric receiver which supplies 1100 F air to a Kalina cycle heat engine. Hot air can also be supplied to a packed bed of Dresser basalt where the hot air is used to heat the bed. The thermal energy stored in the bed can be extracted and supplied to the Kalina cycle during periods of low insolation. Previous investigations of the volumetric receiver concentrated on high temperature applications. The results showed that the volumetric concept could be very efficient, but the receiver was expensive and there were significant technical problems. Areas of technical uncertainty included fiber durability, the feasibility of inducing a preswirl and cost effective applications. The use of the volumetric receiver to produce low temperature will avoid the problems identified in the high temperature studies. The attractiveness of the low temperature concept is enhanced by the availability of the Kalina cycle. This heat engine was developed as a bottoming cycle for Brayton and Rankine cycle power plants. The key feature of the Kalina cycle is its ability to efficiently utilize the energy in a relatively low temperature heat source. The combination of the low temperature volumetric receiver and the Kalina cycle is particularly interesting.

  5. Low-temperature volumetric receiver concept

    SciTech Connect

    Drost, M.K.

    1988-09-01

    This document describes an alternative solar central receiver concept that offers the potential for a substantial reduction in the cost of electrical energy. The concept consists of a low temperature volumetric receiver which supplies 1100/degree/F air to a Kalina cycle heat engine. Hot air can also be supplied to a packed bed of Dresser basalt where the hot air is used to heat the bed. The thermal energy stored in the bed can be extracted and supplied to the Kalina cycle during periods of low insolation. Previous investigations of the volumetric receiver concentrated on high temperature applications. The results showed that the volumetric concept could be very efficient, but the receiver was expensive and there were significant technical problems. Areas of technical uncertainty included fiber durability, the feasibility of inducing a preswirl and cost effective applications. The use of the volumetric receiver to produce low temperature will avoid the problems identified in the high temperature studies. The attractiveness of the low temperature concept is enhanced by the availability of the Kalina cycle. This heat engine was developed as a bottoming cycle for Brayton and Rankine cycle power plants. The key feature of the Kalina cycle is its ability to efficiently utilize the energy in a relatively low temperature heat source. The combination of the low temperature volumetric receiver and the Kalina cycle is particularly interesting. 7 refs., 2 figs., 3 tabs.

  6. Internal Film Receiver systems assessment study

    SciTech Connect

    Anderson, J.V.

    1988-03-01

    This report documents SERI's Internal Film Receiver (IFR) design study and system assessment effort; and it compares the performance and economic potential of this system to conventional salt-in-tube receivers and to systems with the direct absorption receiver (DAR). SPECO, Inc., under contract to SERI, performed the receiver configuration work and their final report is included as Appendix A. The IFR is similar to the DAR in that both use films flowing over nearly vertical plates to absorb the solar energy. However, in the IFR the radiation strikes the outside of the absorber plate and the working fluid flows down the inside. The results of the system-level assessment indicate that the IFR concept has the potential to deliver levelized energy costs (LEC) on the order of 5%--7% lower than the salt-in-tube receiver. Although the potential economic benefits of the IFR are not as great as those for the DAR, which shows more than a 15% improvement in LEC over the salt-in-tube receiver system, this may be offset by the lower technical risks with the IFR. 3 refs., 2 figs., 7 tabs.

  7. Postoperative analgesia in children when using clonidine in addition to fentanyl with bupivacaine given caudally

    PubMed Central

    Jarraya, Anouar; Elleuch, Sahar; Zouari, Jawhar; Smaoui, Mohamed; Laabidi, Sofiene; Kolsi, Kamel

    2016-01-01

    The aim of the study was to evaluate the efficacy of clonidine in association with fentanyl as an additive to bupivacaine 0.25% given via single shot caudal epidural in pediatric patients for postoperative pain relief. In the present prospective randomized double blind study, 40 children of ASA-I-II aged 1-5 years scheduled for infraumblical surgical procedures were randomly allocated to two groups to receive either bupivacaine 0.25% (1 ml/kg) with fentanyl 1 μg/kg and clonidine 1μg/kg (group I) or bupivacaine 0.25% (1 ml/kg) with fentanyl 1 μg/kg (group II). Caudal block was performed after the induction of general anesthesia. Postoperatively patients were observed for analgesia, sedation, hemodynamic parameters, and side effects or complications. Both the groups were similar with respect to patient and various block characteristics. Heart rate and blood pressure were not different in 2 groups. Significantly prolonged duration of post-operative analgesia was observed in group I (P<0.05). Side effects such as respiratory depression, vomiting and bradycardia were similar in both groups. The adjunction of clonidine to fentanyl as additives to bupivacaine in single shot caudal epidural in children may provide better and longer analgesia after infraumblical surgical procedures.

  8. Performance outlook of the SCRAP receiver

    NASA Astrophysics Data System (ADS)

    Lubkoll, Matti; von Backström, Theodor W.; Harms, Thomas M.

    2016-05-01

    A combined cycle (CC) concentrating solar power (CSP) plant provides significant potential to achieve an efficiency increase and an electricity cost reduction compared to current single-cycle plants. A CC CSP system requires a receiver technology capable of effectively transferring heat from concentrated solar irradiation to a pressurized air stream of a gas turbine. The small number of pressurized air receivers demonstrated to date have practical limitations, when operating at high temperatures and pressures. As yet, a robust, scalable and efficient system has to be developed and commercialized. A novel receiver system, the Spiky Central Receiver Air Pre-heater (SCRAP) concept has been proposed to comply with these requirements. The SCRAP system is conceived as a solution for an efficient and robust pressurized air receiver that could be implemented in CC CSP concepts or standalone solar Brayton cycles without a bottoming Rankine cycle. The presented work expands on previous publications on the thermal modeling of the receiver system. Based on the analysis of a single heat transfer element (spike), predictions for its thermal performance can be made. To this end the existing thermal model was improved by heat transfer characteristics for the jet impingement region of the spike tip as well as heat transfer models simulating the interaction with ambient. While the jet impingement cooling effect was simulated employing a commercial CFD code, the ambient heat transfer model was based on simplifying assumptions in order to employ empirical and analytical equations. The thermal efficiency of a spike under design conditions (flux 1.0 MW/m2, air outlet temperature just below 800 °C) was calculated at approximately 80 %, where convective heat losses account for 16.2 % of the absorbed radiation and radiative heat losses for a lower 2.9 %. This effect is due to peak surface temperatures occurring at the root of the spikes. It can thus be concluded that the geometric

  9. Determination of Thermal State of Charge in Solar Heat Receivers

    NASA Technical Reports Server (NTRS)

    Glakpe, E. K.; Cannon, J. N.; Hall, C. A., III; Grimmett, I. W.

    1996-01-01

    The research project at Howard University seeks to develop analytical and numerical capabilities to study heat transfer and fluid flow characteristics, and the prediction of the performance of solar heat receivers for space applications. Specifically, the study seeks to elucidate the effects of internal and external thermal radiation, geometrical and applicable dimensionless parameters on the overall heat transfer in space solar heat receivers. Over the last year, a procedure for the characterization of the state-of-charge (SOC) in solar heat receivers for space applications has been developed. By identifying the various factors that affect the SOC, a dimensional analysis is performed resulting in a number of dimensionless groups of parameters. Although not accomplished during the first phase of the research, data generated from a thermal simulation program can be used to determine values of the dimensionless parameters and the state-of-charge and thereby obtain a correlation for the SOC. The simulation program selected for the purpose is HOTTube, a thermal numerical computer code based on a transient time-explicit, axisymmetric model of the total solar heat receiver. Simulation results obtained with the computer program are presented the minimum and maximum insolation orbits. In the absence of any validation of the code with experimental data, results from HOTTube appear reasonable qualitatively in representing the physical situations modeled.

  10. Patient perspectives on care received at community acupuncture clinics: a qualitative thematic analysis

    PubMed Central

    2013-01-01

    Background Community acupuncture is a recent innovation in acupuncture service delivery in the U.S. that aims to improve access to care through low-cost treatments in group-based settings. Patients at community acupuncture clinics represent a broader socioeconomic spectrum and receive more frequent treatments compared to acupuncture users nationwide. As a relatively new model of acupuncture in the U.S., little is known about the experiences of patients at community acupuncture clinics and whether quality of care is compromised through this high-volume model. The aim of this study was to assess patients’ perspectives on the care received through community acupuncture clinics. Methods The investigators conducted qualitative, thematic analysis of written comments from an observational, cross-sectional survey of clients of the Working Class Acupuncture clinics in Portland, Oregon. The survey included an open-ended question for respondents to share comments about their experiences with community acupuncture. Comments were received from 265 community acupuncture patients. Results Qualitative analysis of written comments identified two primary themes that elucidate patients’ perspectives on quality of care: 1) aspects of health care delivery unique to community acupuncture, and 2) patient engagement in health care. Patients identified unique aspects of community acupuncture, including structures that facilitate access, processes that make treatments more comfortable and effective and holistic outcomes including physical improvements, enhanced quality of life, and empowerment. The group setting, community-based locations, and low cost were highlighted as aspects of this model that allow patients to access acupuncture. Conclusions Patients’ perspectives on the values and experiences unique to community acupuncture offer insights on the quality of care received in these settings. The group setting, community-based locations, and low cost of this model potentially

  11. Cardiovascular group

    NASA Technical Reports Server (NTRS)

    Blomqvist, Gunnar

    1989-01-01

    As a starting point, the group defined a primary goal of maintaining in flight a level of systemic oxygen transport capacity comparable to each individual's preflight upright baseline. The goal of maintaining capacity at preflight levels would seem to be a reasonable objective for several different reasons, including the maintenance of good health in general and the preservation of sufficient cardiovascular reserve capacity to meet operational demands. It is also important not to introduce confounding variables in whatever other physiological studies are being performed. A change in the level of fitness is likely to be a significant confounding variable in the study of many organ systems. The principal component of the in-flight cardiovascular exercise program should be large-muscle activity such as treadmill exercise. It is desirable that at least one session per week be monitored to assure maintenance of proper functional levels and to provide guidance for any adjustments of the exercise prescription. Appropriate measurements include evaluation of the heart-rate/workload or the heart-rate/oxygen-uptake relationship. Respiratory gas analysis is helpful by providing better opportunities to document relative workload levels from analysis of the interrelationships among VO2, VCO2, and ventilation. The committee felt that there is no clear evidence that any particular in-flight exercise regimen is protective against orthostatic hypotension during the early readaptation phase. Some group members suggested that maintenance of the lower body muscle mass and muscle tone may be helpful. There is also evidence that late in-flight interventions to reexpand blood volume to preflight levels are helpful in preventing or minimizing postflight orthostatic hypotension.

  12. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  13. Baseload Nitrate Salt Central Receiver Power Plant Design Final Report

    SciTech Connect

    Tilley, Drake; Kelly, Bruce; Burkholder, Frank

    2014-12-12

    manufacturing. The cost and design goals for the project were met with this task, but the most interesting results had to do with defining the failure modes and looking at a “shakedown analysis” of the combined creep-fatigue failure. A separate task also looked at improving the absorber coatings on the receiver tubes that would improve the efficiency of the receiver. Significant progress was made on developing a novel paint with a high absorptivity that was on par with the current Pyromark, but shows additional potential to be optimized further. Although the coating did not meet the emissivity goals, preliminary testing the new paint shows potential to be much more durable, and potential to improve the receiver efficiency through a higher average absorptivity over the lifetime. Additional coatings were also designed and modeled results meet the project goals, but were not tested. Testing for low cycle fatigue of the full length receiver tubes was designed and constructed, but is still currently undergoing testing. A novel small heliostat was developed through an extensive brainstorming and down select. The concept was then detailed further with inputs from component testing and eventually a full prototype was built and tested. This task met or exceeded the accuracy and structure goals and also beat the cost goal. This provides a significant solar field costs savings for Abengoa that will be developed further to be used in future commercial plants. Ultimately the $0.09/kWhe (real 2009 $) and 6,400 hours goals of the project were met.

  14. Glenn Research Center quantum communicator receiver design and development

    NASA Astrophysics Data System (ADS)

    Hizlan, Murad; Lekki, John D.; Nguyen, Binh V.

    2009-10-01

    We investigate, design, and develop a prototype real-time synchronous receiver for the second-generation quantum communicator recently developed at the National Aeronautics and Space Administration (NASA) Glenn Research Center. This communication system exploits the temporal coincidences between simultaneously fired low-power laser sources to communicate at power levels several orders of magnitude less than what is currently achievable through classical means, with the ultimate goal of creating ultra-low-power microsize optical communications and sensing devices. The proposed receiver uses a unique adaptation of the early-late gate method for symbol synchronization and a newly identified 31-bit synchronization word for frame synchronization. This receiver, implemented in a field-programmable gate array (FPGA), also provides a number of significant additional features over the existing non-real-time experimental receiver, such as real-time bit error rate (BER) statistics collection and display, and recovery and display of embedded textual information. It also exhibits an indefinite run time and statistics collection.

  15. 42 CFR 435.232 - Individuals receiving only optional State supplements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 20 CFR 416.2020(d). (9) Reasonable groups of individuals, as specified by the State, receiving State... supplements. (a) If the agency provides Medicaid to individuals receiving SSI under § 435.120, it may provide... eligible for SSI except for the level of their income. (1) All aged individuals. (2) All blind...

  16. Sexual function in women receiving maintenance dialysis.

    PubMed

    Seethala, Srikanth; Hess, Rachel; Bossola, Maurizio; Unruh, Mark L; Weisbord, Steven D

    2010-01-01

    While substantial attention has been paid to the issue of sexual dysfunction in men on chronic dialysis, less is known about this problem in women with end-stage renal disease. We sought to assess sexual dysfunction in women on chronic dialysis and determine whether patients discuss this problem with their providers and receive treatment. We prospectively enrolled women receiving chronic hemodialysis or peritoneal dialysis in Pittsburgh, PA. We asked patients to complete the 19-item Female Sexual Function Index (FSFI) to assess sexual function and a 5-item survey that assessed whether patients had discussed sexual dysfunction with their providers and/or received treatment for this problem in the past. We enrolled 66 patients; 59 (89%) on hemodialysis and 7 (11%) on peritoneal dialysis. All patients completed the FSFI, of whom 53 (80%) had FSFI scores <26.55, consistent with the presence of sexual dysfunction. Of 37 patients who were married or residing with a significant other, 27 (73%) had sexual dysfunction. Among 24 participants who reported having been sexually active over the previous 4 weeks, 11 (46%) had sexual dysfunction. Only 21% of patients with sexual dysfunction had discussed this problem with their gynecologist, renal or primary provider, and 3 (6%) reported having received treatment. Sexual dysfunction is common in women on dialysis, even among patients who are married or residing with a significant other and those who are sexually active. However, few women discuss this issue with their providers or receive treatment.

  17. GPS high dynamic receiver tracking demonstration results

    NASA Technical Reports Server (NTRS)

    Hurd, W. J.; Statman, J. I.; Vilnrotter, V. A.

    1985-01-01

    Demonstration results are presented for a high dynamic GPS receiver. The receiver tested is a breadboard unit capable of tracking one simulated satellite signal in pseudorange and range rate. The receiver makes approximate maximum likelihood estimates of pseudorange and range rate each 20 ms, and tracks these observables using a third order filter with a time constant of 0.14 s. Carrier phase is not tracked, which eliminates the typical failure mode of loss of carrier lock associated with PLLs at high dynamics. The receiver tracks with pseudorange lag errors of under 0.06 m when subjected to simulated 50 g turns with 40 g/s peak jerk. Pseudorange errors due to receiver noise alone are approximately 0.6 m rms at a carrier power to noise spectral density ratio of 34 dB-Hz. The tracking threshold SNR is approximately 28 dB-Hz, which provides 12 dB margin relative to the 40 dB-Hz that occurs with minimum specified satellite signal strength, 3.5 dB system noise figure, and 0 dBi antenna gain.

  18. Direct broadcast satellite-radio, receiver development

    NASA Astrophysics Data System (ADS)

    Vaisnys, A.; Bell, D.; Gevargiz, J.; Golshan, Nasser

    The status of the ongoing Direct Broadcast Satellite-Radio (DBS-R) Receiver Development Task being performed at the Jet Propulsion Laboratory, California Institute of Technology (JPL) is reported. This work is sponsored by the Voice of America/U.S. Information Agency through an agreement with NASA. The objective of this task is to develop, build, test, and demonstrate a prototype receiver that is compatible with reception of digital audio programs broadcast via satellites. The receiver is being designed to operate under a range of reception conditions, including fixed, portable, and mobile, as well as over a sufficiently wide range of bit rates to accommodate broadcasting systems with different cost/audio quality objectives. While the requirements on the receiver are complex, the eventual goal of the design effort is to make the design compatible with low cost production as a consumer product. One solution may be a basic low cost core design suitable for a majority of reception conditions, with optional enhancements for reception in especially difficult environments. Some of the receiver design parameters were established through analysis, laboratory tests, and a prototype satellite experiment accomplished in late 1991. Many of the necessary design trades will be made during the current simulation effort, while a few of the key design options will be incorporated into the prototype for evaluation during the planned satellite field trials.

  19. Schottky Heterodyne Receivers With Full Waveguide Bandwidth

    NASA Technical Reports Server (NTRS)

    Hesler, Jeffrey; Crowe, Thomas

    2011-01-01

    Compact THz receivers with broad bandwidth and low noise have been developed for the frequency range from 100 GHz to 1 THz. These receivers meet the requirements for high-resolution spectroscopic studies of planetary atmospheres (including the Earth s) from spacecraft, as well as airborne and balloon platforms. The ongoing research is significant not only for the development of Schottky mixers, but also for the creation of a receiver system, including the LO chain. The new receivers meet the goals of high sensitivity, compact size, low total power requirement, and operation across complete waveguide bands. The exceptional performance makes these receivers ideal for the broader range of scientific and commercial applications. These include the extension of sophisticated test and measurement equipment to 1 THz and the development of low-cost imaging systems for security applications and industrial process monitoring. As a particular example, a WR-1.9SHM (400-600 GHz) has been developed (see Figure 1), with state-of-the-art noise temperature ranging from 1,000-1,800 K (DSB) over the full waveguide band. Also, a Vector Network Analyzer extender has been developed (see Figure 2) for the WR1.5 waveguide band (500 750 GHz) with 100-dB dynamic range.

  20. Direct broadcast satellite-radio, receiver development

    NASA Technical Reports Server (NTRS)

    Vaisnys, A.; Bell, D.; Gevargiz, J.; Golshan, Nasser

    1993-01-01

    The status of the ongoing Direct Broadcast Satellite-Radio (DBS-R) Receiver Development Task being performed at the Jet Propulsion Laboratory, California Institute of Technology (JPL) is reported. This work is sponsored by the Voice of America/U.S. Information Agency through an agreement with NASA. The objective of this task is to develop, build, test, and demonstrate a prototype receiver that is compatible with reception of digital audio programs broadcast via satellites. The receiver is being designed to operate under a range of reception conditions, including fixed, portable, and mobile, as well as over a sufficiently wide range of bit rates to accommodate broadcasting systems with different cost/audio quality objectives. While the requirements on the receiver are complex, the eventual goal of the design effort is to make the design compatible with low cost production as a consumer product. One solution may be a basic low cost core design suitable for a majority of reception conditions, with optional enhancements for reception in especially difficult environments. Some of the receiver design parameters were established through analysis, laboratory tests, and a prototype satellite experiment accomplished in late 1991. Many of the necessary design trades will be made during the current simulation effort, while a few of the key design options will be incorporated into the prototype for evaluation during the planned satellite field trials.

  1. Liquid cooled, linear focus solar cell receiver

    DOEpatents

    Kirpich, A.S.

    1983-12-08

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  2. Liquid cooled, linear focus solar cell receiver

    DOEpatents

    Kirpich, Aaron S.

    1985-01-01

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  3. An Experimental Study of the Differential Effects of Parole Supervision for a Group of Adolescent Boys and Girls. Summary Report.

    ERIC Educational Resources Information Center

    Hudson, C. H.

    This study was designed to assess whether randomly selected male and female parolees could do as well without formal parole supervision as under conventional parole supervision. In addition, the kind and amount of help sought out and received within the community by the respective experimental and control group subjects was examined. The…

  4. Additive effect of linseed oil supplementation on the lipid profiles of older adults

    PubMed Central

    Avelino, Ana Paula A; Oliveira, Gláucia MM; Ferreira, Célia CD; Luiz, Ronir R; Rosa, Glorimar

    2015-01-01

    Background Linseed oil has been investigated as a rich source of n-3 series polyunsaturated fatty acids, which mainly produce a non-atherogenic lipid profile. The objective of this study was to investigate the effect of linseed oil supplementation associated with nutritional guidelines on the lipid profiles of older adults, according to the intake of saturated fatty acids (SFA). Methods We conducted a double-blind, placebo-controlled clinical trial with 110 older adults randomized in two groups: placebo and linseed oil. The linseed oil group received supplementation with 3 g of linseed oil. Both groups received nutritional guidance and were supplemented for 90 days with monthly blood collection for biochemical analysis. The dietary intake of saturated fat was subdivided into low (<7% SFA/day of the total energy value) and high consumption groups (>7% SFA/day of the total energy value). Results Low SFA (<7% SFA/day of total energy value) consumption was associated with lower total cholesterol concentrations. However, we observed that the linseed oil group, including older adults who consumed >7% SFA/day, had a greater reduction in total cholesterol than the placebo group (P=0.020). The same was observed for low-density lipoprotein (LDL) cholesterol (P<0.050), suggesting an additive effect of linseed oil and diet. High-density lipoprotein (HDL) cholesterol concentrations were increased significantly in only the linseed group, suggesting that the nutritional intervention alone did not improve HDL cholesterol. Conclusion The results suggest that the nutritional intervention was effective, but linseed oil showed notable effects by increasing the HDL cholesterol concentration. In addition, consumption of <7% SFA/day of the total energy value increased the effect of linseed oil, demonstrating the importance of reducing the consumption of saturated fat. PMID:26543357

  5. The ARSQ: the athletes' received support questionnaire.

    PubMed

    Freeman, Paul; Coffee, Pete; Moll, Tjerk; Rees, Tim; Sammy, Nadine

    2014-04-01

    To address calls for context-specific measurement of social support, this article reports the development of the Athletes' Received Support Questionnaire (ARSQ) and demonstrates initial evidence for its validity. Across four studies there was support for a four-dimensional structure reflecting emotional, esteem, informational, and tangible received support. There was also support for unidimensional and higher-order models. Further, Study 3 provided some support for convergent validity, with significant correlations between the corresponding dimensions of the ARSQ and the Inventory of Socially Supportive Behaviors. Study 4 provided evidence for the nomological validity of the ARSQ. Emotional and esteem support significantly predicted self-confidence and positive affect, and tangible support significantly moderated the relationship between stress and negative affect. Collectively, these results provide initial evidence for the validity of the ARSQ, and offer researchers flexibility to adopt either a multidimensional or aggregated approach to measuring received support. PMID:24686955

  6. 40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 04333 Maryland (EPA Form), Science and Health Advisory Group, Office of Environmental Programs, 201 West... Notifications II Appendix II to Part 280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Designated To Receive Notifications Alabama (EPA Form), Alabama Department of Environmental...

  7. 40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 04333 Maryland (EPA Form), Science and Health Advisory Group, Office of Environmental Programs, 201 West... Notifications II Appendix II to Part 280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Designated To Receive Notifications Alabama (EPA Form), Alabama Department of Environmental...

  8. 40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 04333 Maryland (EPA Form), Science and Health Advisory Group, Office of Environmental Programs, 201 West... Notifications II Appendix II to Part 280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Designated To Receive Notifications Alabama (EPA Form), Alabama Department of Environmental...

  9. 40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 04333 Maryland (EPA Form), Science and Health Advisory Group, Office of Environmental Programs, 201 West... Notifications II Appendix II to Part 280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Designated To Receive Notifications Alabama (EPA Form), Alabama Department of Environmental...

  10. 40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 04333 Maryland (EPA Form), Science and Health Advisory Group, Office of Environmental Programs, 201 West... Notifications II Appendix II to Part 280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Designated To Receive Notifications Alabama (EPA Form), Alabama Department of Environmental...

  11. 26 CFR 514.3 - Dividends received by addressee not actual owner.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) REGULATIONS UNDER TAX CONVENTIONS FRANCE Withholding of Tax § 514.3 Dividends received by addressee not actual owner. (a) Additional tax to be withheld—(1) Nominee or representative. The recipient in France of any... or partnership. A fiduciary or a partnership with an address in France which receives, otherwise...

  12. 47 CFR 15.111 - Antenna power conduction limits for receivers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Antenna power conduction limits for receivers. 15.111 Section 15.111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unintentional Radiators § 15.111 Antenna power conduction limits for receivers. (a) In addition...

  13. 47 CFR 15.111 - Antenna power conduction limits for receivers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 1 2011-10-01 2011-10-01 false Antenna power conduction limits for receivers. 15.111 Section 15.111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unintentional Radiators § 15.111 Antenna power conduction limits for receivers. (a) In addition...

  14. 47 CFR 15.111 - Antenna power conduction limits for receivers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Antenna power conduction limits for receivers. 15.111 Section 15.111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unintentional Radiators § 15.111 Antenna power conduction limits for receivers. (a) In addition...

  15. 47 CFR 15.111 - Antenna power conduction limits for receivers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 1 2012-10-01 2012-10-01 false Antenna power conduction limits for receivers. 15.111 Section 15.111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unintentional Radiators § 15.111 Antenna power conduction limits for receivers. (a) In addition...

  16. 47 CFR 15.111 - Antenna power conduction limits for receivers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 1 2013-10-01 2013-10-01 false Antenna power conduction limits for receivers. 15.111 Section 15.111 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO FREQUENCY DEVICES Unintentional Radiators § 15.111 Antenna power conduction limits for receivers. (a) In addition...

  17. 26 CFR 514.3 - Dividends received by addressee not actual owner.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) REGULATIONS UNDER TAX CONVENTIONS FRANCE Withholding of Tax § 514.3 Dividends received by addressee not actual owner. (a) Additional tax to be withheld—(1) Nominee or representative. The recipient in France of any... or partnership. A fiduciary or a partnership with an address in France which receives, otherwise...

  18. 26 CFR 514.3 - Dividends received by addressee not actual owner.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) REGULATIONS UNDER TAX CONVENTIONS FRANCE Withholding of Tax § 514.3 Dividends received by addressee not actual owner. (a) Additional tax to be withheld—(1) Nominee or representative. The recipient in France of any... or partnership. A fiduciary or a partnership with an address in France which receives, otherwise...

  19. 26 CFR 514.3 - Dividends received by addressee not actual owner.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) REGULATIONS UNDER TAX CONVENTIONS FRANCE Withholding of Tax § 514.3 Dividends received by addressee not actual owner. (a) Additional tax to be withheld—(1) Nominee or representative. The recipient in France of any... or partnership. A fiduciary or a partnership with an address in France which receives, otherwise...

  20. 26 CFR 1.1081-8 - Exchanges in which money or other nonexempt property is received.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Exchanges in which money or other nonexempt... § 1.1081-8 Exchanges in which money or other nonexempt property is received. (a) Under section 1081(e... money or other nonexempt property (in addition to property permitted to be received without...

  1. Group evaporation

    NASA Technical Reports Server (NTRS)

    Shen, Hayley H.

    1991-01-01

    Liquid fuel combustion process is greatly affected by the rate of droplet evaporation. The heat and mass exchanges between gas and liquid couple the dynamics of both phases in all aspects: mass, momentum, and energy. Correct prediction of the evaporation rate is therefore a key issue in engineering design of liquid combustion devices. Current analytical tools for characterizing the behavior of these devices are based on results from a single isolated droplet. Numerous experimental studies have challenged the applicability of these results in a dense spray. To account for the droplets' interaction in a dense spray, a number of theories have been developed in the past decade. Herein, two tasks are examined. One was to study how to implement the existing theoretical results, and the other was to explore the possibility of experimental verifications. The current theoretical results of group evaporation are given for a monodispersed cluster subject to adiabatic conditions. The time evolution of the fluid mechanic and thermodynamic behavior in this cluster is derived. The results given are not in the form of a subscale model for CFD codes.

  2. Usefulness of anterior uveitis as an additional tool for diagnosing incomplete Kawasaki disease

    PubMed Central

    Lee, Kyu Jin; Kim, Hyo Jin; Kim, Min Jae; Yoon, Ji Hong; Lee, Eun Jung; Lee, Jae Young; Oh, Jin Hee; Lee, Soon Ju; Lee, Kyung Yil

    2016-01-01

    Purpose There are no specific tests for diagnosing Kawasaki disease (KD). Additional diagnostic criteria are needed to prevent the delayed diagnosis of incomplete Kawasaki disease (IKD). This study compared the frequency of coronary artery lesions (CALs) in IKD patients with and without anterior uveitis (AU) and elucidated whether the finding of AU supported the diagnosis of IKD. Methods This study enrolled patients diagnosed with IKD at The Catholic University of Korea, Uijeongbu St. Mary's Hospital from January 2010 to December 2014. The patients were divided into 2 groups: group 1 included patients with IKD having AU; and group 2 included patients with IKD without AU. We analyzed the demographic and clinical data (age, gender, duration of fever, and the number of diagnostic criteria), laboratory results, and echocardiographic findings. Results Of 111 patients with IKD, 41 had uveitis (36.98%, group 1) and 70 did not (63.02%, group 2). Patients in group 1 had received a diagnosis and treatment earlier, and had fewer CALs (3 of 41, 1.7%) than those in group 2 (20 of 70, 28.5%) (P=0.008). All 3 patients with CALs in group 1 had coronary dilatation, while patients with CALs in group 2 had CALs ranging from coronary dilatation to giant aneurysm. Conclusion The diagnosis of IKD is challenging but can be supported by the presence of features such as AU. Group 1 had a lower risk of coronary artery disease than group 2. Therefore, the presence of AU is helpful in the early diagnosis and treatment of IKD and can be used as an additional diagnostic tool. PMID:27186227

  3. Optical Receiver Based On Luminescent Light Trapping

    NASA Technical Reports Server (NTRS)

    Perry, Joseph W.; Cole, Terry; Zewail, Ahmed H.

    1991-01-01

    Experiment demonstrates feasibility of optical-communication receiver based on luminescent light trapping. Light-gathering element plate of transparent material impregnated with laser dye. Light from distant laser transmitter falls on plate and absorbed by dye molecules, which become excited and reradiate. Reradiated light confined within plate by total internal reflection as it propagates toward edge of plate. Light arriving at edge escapes from plate and detected by small, high-speed, high-gain photomultiplier tubes or other photosensitive devices. Simple, inexpensive, and accepts light from almost any angle. Receiver of this configuration supports reception of data at rate of 13 MHz and higher.

  4. Optimization of MLS receivers for multipath environments

    NASA Technical Reports Server (NTRS)

    Mcalpine, G. A.; Highfill, J. H., III

    1976-01-01

    The design of a microwave landing system (MLS) aircraft receiver, capable of optimal performance in multipath environments found in air terminal areas, is reported. Special attention was given to the angle tracking problem of the receiver and includes tracking system design considerations, study and application of locally optimum estimation involving multipath adaptive reception and then envelope processing, and microcomputer system design. Results show processing is competitive in this application with i-f signal processing performance-wise and is much more simple and cheaper. A summary of the signal model is given.

  5. Avalanche Photodiode Arrays for Optical Communications Receivers

    NASA Technical Reports Server (NTRS)

    Srinivasan, M.; Vilnrotter, V.

    2001-01-01

    An avalanche photodiode (APD) array for ground-based optical communications receivers is investigated for the reception of optical signals through the turbulent atmosphere. Kolmogorov phase screen simulations are used to generate realistic spatial distributions of the received optical field. It is shown that use of an APD array for pulse-position modulation detection can improve performance by up to 4 dB over single APD detection in the presence of turbulence, but that photon-counting detector arrays yield even greater gains.

  6. Infrared receiver having a cooled radiation detector

    SciTech Connect

    Van Antwerpen, H. C.

    1985-04-09

    An infrared receiver having an infrared radiation detector cooled by means of a cold-gas engine, the thermal contact between a cooling surface of the cold-gas engine and the radiation detector being obtained by an elastic thermally conducting bridge. The cylindrical bridge is comprised of a plurality of turns of a metal strip. Due to the presence of the bridge, a good thermal conduction and further a compensation for differences in thermal expansion coefficients of the materials used are obtained. The infrared receiver is particularly suitable for night vision apparatus.

  7. Turbulent flow inside a solar concentrator receiver

    NASA Astrophysics Data System (ADS)

    Ramirez, Manuel; Ramos, Eduardo

    2014-11-01

    A solar concentrator receiver is a heat exchanger designed to absorb a beam of radiant heat coming from a field of heliostats. Inside the device, a slow forced flow generated bye an external pressure gradient is present, together with a natural convective a turbulent flow produced by the large temperature gradients due to intense heating. We present a model of this device based on the numerical solution of the mass, momentum and energy conservation equations. We consider heating conditions that lead to turbulence convective flow. For this season, a large eddy simulation model is incorporated. The results are potentially useful for the design of solar concentrator receivers.

  8. Downhole receiver function: A case study

    USGS Publications Warehouse

    Mehta, K.; Snieder, R.; Graizer, V.

    2007-01-01

    Receiver function is defined as the spectral ratio of the radial component and the vertical component of the ground motion. It is used to characterize converted waves. We extend the use of the receiver function to downhole data using waves recorded in a borehole, excited by an earthquake of magnitude 4.0 near San Francisco, California, on 26 June 1994. The focal depth of the event was 6.6 km and the epicenter was located at a distance of 12.6 km from the borehole array. Six three-component sensors were located at different depths in a borehole. To extract a coherent response of the near-surface from the incoherent earthquake waves, we deconvolve the waves recorded by the sensors at different depths with the waves recorded by the sensor on the surface. Deconvolution applied to the waves in the S-time window recorded by the radial component result in an upgoing and a downgoing wave propagating with S-wave velocity. For the waves in the P-time window recorded by the radial component, deconvolution also gives an upgoing and a down-going wave propagating with S-wave velocity. This interesting result suggests a P-to-S conversion at a depth below the deepest sensor. To diagnose this we compute the receiver function for the borehole recording of the earthquake waves. The receiver function shows an upgoing wave with an arrival close to time t = 0 for the deepest sensor. The agreement of the upgoing wave in the receiver function with the travel-time curve for the P-to-S converted wave, calculated using the P- and the S-wave velocity profile, supports the hypothesis of a pronounced P-to-S conversion. We present a synthetic example to illustrate that the first arrival of the receiver function applied to borehole data gives the upward-propagating P-to-S converted wave. To corroborate the observation of the mode conversion, we apply receiver function to a different earthquake data recorded by the same borehole array in 1998. The focal depth of the event was 6.9 km and the

  9. Investigation of cold filling receiver panels and piping in molten-nitrate-salt central-receiver solar power plants

    SciTech Connect

    Pacheco, J.E.; Ralph, M.E.; Chavez, J.M.

    1994-12-31

    Cold filling refers to flowing a fluid through piping or tubes that are at temperatures below the fluid`s freezing point. Since the piping and areas of the receiver in a molten-nitrate salt central-receiver solar power plant must be electrically heated to maintain their temperatures above the nitrate salt freezing point (430{degrees}F, 221{degrees}C), considerable energy could be used to maintain such temperatures during nightly shut down and bad weather. Experiments and analyses have been conducted to investigate cold filling receiver panels and piping as a way of reducing parasitic electrical power consumption and increasing the availability of the plant. The two major concerns with cold filling are: (1) how far can the molten salt penetrate cold piping before freezing closed and (2) what thermal stresses develop during the associated thermal shock. Cold fill experiments were conducted by flowing molten salt at 550{degrees}F (288{degrees}C) through cold panels, manifolds, and piping to determine the feasibility of cold filling the receiver and piping. The transient thermal responses were measured and heat transfer coefficients were calculated from the data. Nondimensional analysis is presented which quantifies the thermal stresses in a pipe or tube undergoing thermal shock. In addition, penetration distances were calculated to determine the distance salt could flow in cold pipes prior to freezing closed.

  10. E-cigarette use in patients receiving home oxygen therapy.

    PubMed

    Lacasse, Yves; Légaré, Martin; Maltais, François

    2015-01-01

    Current smokers who are prescribed home oxygen may not benefit from the therapy. In addition to being an obvious fire hazard, there is some evidence that the physiological mechanisms by which home oxygen is believed to operate are inhibited by smoking. Although their effectiveness is yet to be demonstrated, electronic cigarettes (e-cigarettes) are often regarded as an aid to smoking cessation. However, several burn accidents in e-cigarette smokers receiving home oxygen therapy have also been reported, leading Health Canada to release a warning of fire risk to oxygen therapy patients from e-cigarettes. It is the authors' position that patients receiving oxygen should definitely not use e-cigarettes. The authors provide suggestions for addressing the delicate issue of home oxygen therapy in current cigarette and⁄or e-cigarette smokers. PMID:25848719

  11. Synchronous OEIC Integrating Receiver for Optically Reconfigurable Gate Arrays.

    PubMed

    Sánchez-Azqueta, Carlos; Goll, Bernhard; Celma, Santiago; Zimmermann, Horst

    2016-05-25

    A monolithically integrated optoelectronic receiver with a low-capacitance on-chip pin photodiode is presented. The receiver is fabricated in a 0.35 μm opto-CMOS process fed at 3.3 V and due to the highly effective integrated pin photodiode it operates at μW. A regenerative latch acting as a sense amplifier leads in addition to a low electrical power consumption. At 400 Mbit/s, sensitivities of -26.0 dBm and -25.5 dBm are achieved, respectively, for λ = 635 nm and λ = 675 nm (BER = 10(-9) ) with an energy efficiency of 2 pJ/bit.

  12. Synchronous OEIC Integrating Receiver for Optically Reconfigurable Gate Arrays.

    PubMed

    Sánchez-Azqueta, Carlos; Goll, Bernhard; Celma, Santiago; Zimmermann, Horst

    2016-01-01

    A monolithically integrated optoelectronic receiver with a low-capacitance on-chip pin photodiode is presented. The receiver is fabricated in a 0.35 μm opto-CMOS process fed at 3.3 V and due to the highly effective integrated pin photodiode it operates at μW. A regenerative latch acting as a sense amplifier leads in addition to a low electrical power consumption. At 400 Mbit/s, sensitivities of -26.0 dBm and -25.5 dBm are achieved, respectively, for λ = 635 nm and λ = 675 nm (BER = 10(-9) ) with an energy efficiency of 2 pJ/bit. PMID:27231915

  13. Synchronous OEIC Integrating Receiver for Optically Reconfigurable Gate Arrays

    PubMed Central

    Sánchez-Azqueta, Carlos; Goll, Bernhard; Celma, Santiago; Zimmermann, Horst

    2016-01-01

    A monolithically integrated optoelectronic receiver with a low-capacitance on-chip pin photodiode is presented. The receiver is fabricated in a 0.35 μm opto-CMOS process fed at 3.3 V and due to the highly effective integrated pin photodiode it operates at μW. A regenerative latch acting as a sense amplifier leads in addition to a low electrical power consumption. At 400 Mbit/s, sensitivities of −26.0 dBm and −25.5 dBm are achieved, respectively, for λ = 635 nm and λ = 675 nm (BER = 10−9 ) with an energy efficiency of 2 pJ/bit. PMID:27231915

  14. 7 CFR 29.42 - Receiving station.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.42 Receiving station. Points at which producer tobacco is offered for marketing (other than sale at auction on a designated market), including tobacco auction warehouses,...

  15. Reasons Parents Exempt Children from Receiving Immunizations

    ERIC Educational Resources Information Center

    Luthy, Karlen E.; Beckstrand, Renea L.; Callister, Lynn C.; Cahoon, Spencer

    2012-01-01

    School nurses are on the front lines of educational efforts to promote childhood vaccinations. However, some parents still choose to exempt their children from receiving vaccinations for personal reasons. Studying the beliefs of parents who exempt vaccinations allows health care workers, including school nurses, to better understand parental…

  16. 21 CFR 1020.10 - Television receivers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... extends beyond the plane surfaces of the enclosure. (2) Maximum test voltage means 130 root mean square volts if the receiver is designed to operate from nominal 110 to 120 root mean square volt power sources... nominal 110 to 120 root mean square volts, maximum test voltage means 110 percent of the nominal root...

  17. Hybrid receiver conceptual design and test report

    NASA Technical Reports Server (NTRS)

    Klare, S. W.; Crawford, J. J.

    1978-01-01

    The Hybrid Receiver described uses an acquisition and demodulation scheme tailored to the Jovian environment. The large Doppler offsets expected during initial acquisition led to development of the Hilbert Acquisition Aid, which provides for rapid acquisition for low signal to noise densities.

  18. Developmental trends in radio receiver design

    NASA Astrophysics Data System (ADS)

    Chistyakov, N. I.

    1984-03-01

    A historical review of the development of shortwave receiver design is followed by an enumeration of the characteristics of the state of the art in shortwave reception equipment: (1) the problem of band coverage, for example in marine receivers from 10 KHz to 30 MHz, has been resolved by the use of infradyne circuits with an IF of 40 to 80 MHz and a broadband preselector; such designs also make it possible to base the local oscillator on a phase-locked loop; (20 suppression of spurious frequencies is improved by placing them outside the working band through the use of a high first IF; (3) enhanced linearity of the broadband RF amplifier and converter has extended the dynamic range of receivers, and eliminated the need for a narrow band preselector with the use of simple suboctave filters and low pass filters at the input; and (4) the use of a decade frequency synthesizer based on a variable divisor frequency divider, highly stable master crystal oscillators, electronic varactor tuning of the local oscillator and Phase-locked loops provide for precise tuning to the requisite frequency, which is also improved by digital tuning and displays. A major aspect of present design work is the application of microprocessors to automatic tuning, programmed frequency setting and the performance of a variety of diagnostic functions in the receiver.

  19. Global lithospheric imaging using teleseismic receiver functions

    NASA Astrophysics Data System (ADS)

    Rondenay, S.; Spieker, K.; Halpaap, F.; Farestveit, M.; Sawade, L.; Zijerveld, L.

    2015-12-01

    Project GLImER (Global Lithospheric Imagining using Earthquake Recordings) aims to conduct a global survey of lithospheric interfaces using converted teleseismic body waves. Data from permanent and temporary seismic networks worldwide will be processed automatically to produce global maps of key interfaces (Moho, intra-lithospheric interfaces, lithosphere-asthenosphere boundary). In this presentation, we discuss the challenges associated with automating the analysis of converted waves and the potential of the resulting data products to be used in novel imaging approaches. With regards to automation, we address in particular the search for an optimal deconvolution method in receiver function analysis. To do so, we carry out a systematic comparison of various commonly used deconvolution methods and find that all methods produce equally robust receiver functions provided that a suitable regularization parameter is found. We further note that a suitable regularization can be found objectively for most approaches, thus challenging the belief that only time-domain deconvolution is a viable option for receiver function automation. With regards to imaging applications, we investigate how the resulting global database of receiver functions will be amenable to existing processing approaches as well as new approaches adapted from seismic exploration, including industry-based interpretation tools.

  20. Kopp Receives 2012 William Gilbert Award: Citation

    NASA Astrophysics Data System (ADS)

    Kirschvink, Joseph L.

    2013-10-01

    Robert E. Kopp received the 2012 William Gilbert Award at the 2012 AGU Fall Meeting, held 3-7 December in San Francisco, Calif. The award recognizes outstanding and unselfish work in magnetism of Earth materials and of the Earth and planets.