Neurocognitive mechanisms underlying deceptive hazard evaluation: An event-related potentials investigation

PubMed Central

Qiu, Wenwei; Ma, Haiying; Ma, Qingguo

2017-01-01

Deceptive behavior is common in human social interactions. Researchers have been trying to uncover the cognitive process and neural basis underlying deception due to its theoretical and practical significance. We used Event-related potentials (ERPs) to investigate the neural correlates of deception when the participants completed a hazard judgment task. Pictures conveying or not conveying hazard information were presented to the participants who were then requested to discriminate the hazard content (safe or hazardous) and make a response corresponding to the cues (truthful or deceptive). Behavioral and electrophysiological data were recorded during the entire experiment. Results showed that deceptive responses, compared to truthful responses, were associated with longer reaction time (RT), lower accuracy, increased N2 and reduced late positive potential (LPP), suggesting a cognitively more demanding process to respond deceptively. The decrement in LPP correlated negatively with the increment in RT for deceptive relative to truthful responses, regardless of hazard content. In addition, hazardous information evoked larger N1 and P300 than safe information, reflecting an early processing bias and a later evaluative categorization process based on motivational significance, respectively. Finally, the interaction between honesty (truthful/deceptive) and safety (safe/hazardous) on accuracy and LPP indicated that deceptive responses towards safe information required more effort than deceptive responses towards hazardous information. Overall, these results demonstrate the neurocognitive substrates underlying deception about hazard information. PMID:28793344

Historic hydrovolcanism at Deception Island (Antarctica): implications for eruption hazards

NASA Astrophysics Data System (ADS)

Pedrazzi, Dario; Németh, Károly; Geyer, Adelina; Álvarez-Valero, Antonio M.; Aguirre-Díaz, Gerardo; Bartolini, Stefania

2018-01-01

Deception Island (Antarctica) is the southernmost island of the South Shetland Archipelago in the South Atlantic. Volcanic activity since the eighteenth century, along with the latest volcanic unrest episodes in the twentieth and twenty-first centuries, demonstrates that the volcanic system is still active and that future eruptions are likely. Despite its remote location, the South Shetland Islands are an important touristic destination during the austral summer. In addition, they host several research stations and three summer field camps. Deception Island is characterised by a Quaternary caldera system with a post-caldera succession and is considered to be part of an active, dispersed (monogenetic), volcanic field. Historical post-caldera volcanism on Deception Island involves monogenetic small-volume (VEI 2-3) eruptions such forming cones and various types of hydrovolcanic edifices. The scientific stations on the island were destroyed, or severely damaged, during the eruptions in 1967, 1969, and 1970 mainly due to explosive activity triggered by the interaction of rising (or erupting) magma with surface water, shallow groundwater, and ice. We conducted a detailed revision (field petrology and geochemistry) of the historical hydrovolcanic post-caldera eruptions of Deception Island with the aim to understand the dynamics of magma-water interaction, as well as characterise the most likely eruptive scenarios from future eruptions. We specifically focused on the Crimson Hill (estimated age between 1825 and 1829), and Kroner Lake (estimated age between 1829 and 1912) eruptions and 1967, 1969, and 1970 events by describing the eruption mechanisms related to the island's hydrovolcanic activity. Data suggest that the main hazards posed by volcanism on the island are due to fallout, ballistic blocks and bombs, and subordinate, dilute PDCs. In addition, Deception Island can be divided into five areas of expected activity due to magma-water interaction, providing additional data for correct hazard assessment on the island.

Potential hazards due to food additives in oral hygiene products.

PubMed

Tuncer Budanur, Damla; Yas, Murat Cengizhan; Sepet, Elif

2016-01-01

Food additives used to preserve flavor or to enhance the taste and appearance of foods are also available in oral hygiene products. The aim of this review is to provide information concerning food additives in oral hygiene products and their adverse effects. A great many of food additives in oral hygiene products are potential allergens and they may lead to allergic reactions such as urticaria, contact dermatitis, rhinitis, and angioedema. Dental practitioners, as well as health care providers, must be aware of the possibility of allergic reactions due to food additives in oral hygiene products. Proper dosage levels, delivery vehicles, frequency, potential benefits, and adverse effects of oral health products should be explained completely to the patients. There is a necessity to raise the awareness among dental professionals on this subject and to develop a data gathering system for possible adverse reactions.

Sinkhole risk analysis from the point of view of a public building insurance, the case of Vaud County (Switzerland)

NASA Astrophysics Data System (ADS)

Nicolet, P.; Choffet, M.; Jaboyedoff, M.; Lauraux, B.; Lance, J.-. L.; Champod, E.

2012-04-01

Natural hazards are being mapped in the Vaud County and sinkhole hazard is part of this process. An preliminary hazard map has already been made based on the sinkholes occurrences and on several other parameters such as rocks types, proximity of major faults and closed basins. The detailed hazard map essentially based on the occurrence of sinkholes is in process. This map will influence the landuse planning. Presently, the public building insurance is covering the damage costs due to all natural hazards that are being mapped except sinkholes. For the sake of consistency and due to political pressure, the insurance company wants to integrate this phenomenon in its insurance coverage. This study aims to assess the potential damage costs to buildings induced by this decision. Karstic process is active in two regions in the County. The first one, namely the Folded Jura, is composed of Jurassic and Cretaceous Carbonate rocks. The second one, the Prealpine region, is composed of both Carbonate and evaporitic rocks. Even if the cavities in carbonate rocks can cause difficulties during the buildings construction, the karst development in these rocks is relatively slow and, as a result, the expected damage costs to buildings is relatively low. In contrast, the evaporitic rocks are likely to cause significant subsidence or sudden collapses at human scale and thus damage the buildings. Therefore, our study is focused on the region where this rock type occurs. It results that many buildings, i.e. more than 10'000, are concerned according to the preliminary hazard map. However some of these buildings are in zones with very low potential. Based on estimated frequencies of collapsing events and subsidence rates, the potential damage cost is estimated. Furthermore, the number of potential claims is also considered in order to know the expected additional work for the insurance company. Careful attention is also given to the potential development of building zones. In addition, the project gives guidelines for the insurance company, focusing on structural measures reducing buildings vulnerability.

Experimental Validation of a Forward Looking Interferometer for Detection of Clear Air Turbulence due to Mountain Waves

NASA Technical Reports Server (NTRS)

Schaffner, Philip R.; Daniels, Taumi S.; West, Leanne L.; Gimmestad, Gary G.; Lane, Sarah E.; Burdette, Edward M.; Smith, William L.; Kireev, Stanislav; Cornman, Larry; Sharman, Robert D.

2012-01-01

The Forward-Looking Interferometer (FLI) is an airborne sensor concept for detection and estimation of potential atmospheric hazards to aircraft. The FLI concept is based on high-resolution Infrared Fourier Transform Spectrometry technologies that have been developed for satellite remote sensing. The FLI is being evaluated for its potential to address multiple hazards, during all phases of flight, including clear air turbulence, volcanic ash, wake vortices, low slant range visibility, dry wind shear, and icing. In addition, the FLI is being evaluated for its potential to detect hazardous runway conditions during landing, such as wet or icy asphalt or concrete. The validation of model-based instrument and hazard simulation results is accomplished by comparing predicted performance against empirical data. In the mountain lee wave data collected in the previous FLI project, the data showed a damped, periodic mountain wave structure. The wave data itself will be of use in forecast and nowcast turbulence products such as the Graphical Turbulence Guidance and Graphical Turbulence Guidance Nowcast products. Determining how turbulence hazard estimates can be derived from FLI measurements will require further investigation.

Behavioral and Environmental Analysis of Self-Reported Dysphonic and Nondysphonic High School Music Teachers

ERIC Educational Resources Information Center

Brown, Emily Pence

2017-01-01

Dysphonia is considered to be a common hazard associated with occupational voice users. Teachers represent the highest percentage of clinical voice disorder patients. Voice injuries in teachers could result in lost wages due to missed work, additional costs for medications, therapy, and surgeries, and teacher attrition. The purpose of this study…

A multivariate copula-based framework for dealing with hazard scenarios and failure probabilities

NASA Astrophysics Data System (ADS)

Salvadori, G.; Durante, F.; De Michele, C.; Bernardi, M.; Petrella, L.

2016-05-01

This paper is of methodological nature, and deals with the foundations of Risk Assessment. Several international guidelines have recently recommended to select appropriate/relevant Hazard Scenarios in order to tame the consequences of (extreme) natural phenomena. In particular, the scenarios should be multivariate, i.e., they should take into account the fact that several variables, generally not independent, may be of interest. In this work, it is shown how a Hazard Scenario can be identified in terms of (i) a specific geometry and (ii) a suitable probability level. Several scenarios, as well as a Structural approach, are presented, and due comparisons are carried out. In addition, it is shown how the Hazard Scenario approach illustrated here is well suited to cope with the notion of Failure Probability, a tool traditionally used for design and risk assessment in engineering practice. All the results outlined throughout the work are based on the Copula Theory, which turns out to be a fundamental theoretical apparatus for doing multivariate risk assessment: formulas for the calculation of the probability of Hazard Scenarios in the general multidimensional case (d≥2) are derived, and worthy analytical relationships among the probabilities of occurrence of Hazard Scenarios are presented. In addition, the Extreme Value and Archimedean special cases are dealt with, relationships between dependence ordering and scenario levels are studied, and a counter-example concerning Tail Dependence is shown. Suitable indications for the practical application of the techniques outlined in the work are given, and two case studies illustrate the procedures discussed in the paper.

76 FR 37647 - Safety Zone; Missouri River From the Border Between Montana and North Dakota

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... destruction, loss or injury due to hazards associated with rising flood water. Operation in this zone is... vessels from destruction, loss or injury due to the hazards associated with rising flood water. The... destruction, loss or injury due to the hazards associated with rising flood water. If you are a small business...

Parametric studies with an atmospheric diffusion model that assesses toxic fuel hazards due to the ground clouds generated by rocket launches

NASA Technical Reports Server (NTRS)

Stewart, R. B.; Grose, W. L.

1975-01-01

Parametric studies were made with a multilayer atmospheric diffusion model to place quantitative limits on the uncertainty of predicting ground-level toxic rocket-fuel concentrations. Exhaust distributions in the ground cloud, cloud stabilized geometry, atmospheric coefficients, the effects of exhaust plume afterburning of carbon monoxide CO, assumed surface mixing-layer division in the model, and model sensitivity to different meteorological regimes were studied. Large-scale differences in ground-level predictions are quantitatively described. Cloud alongwind growth for several meteorological conditions is shown to be in error because of incorrect application of previous diffusion theory. In addition, rocket-plume calculations indicate that almost all of the rocket-motor carbon monoxide is afterburned to carbon dioxide CO2, thus reducing toxic hazards due to CO. The afterburning is also shown to have a significant effect on cloud stabilization height and on ground-level concentrations of exhaust products.

Integrating SAR with Optical and Thermal Remote Sensing for Operational Near Real-Time Volcano Monitoring

NASA Astrophysics Data System (ADS)

Meyer, F. J.; Webley, P.; Dehn, J.; Arko, S. A.; McAlpin, D. B.

2013-12-01

Volcanic eruptions are among the most significant hazards to human society, capable of triggering natural disasters on regional to global scales. In the last decade, remote sensing techniques have become established in operational forecasting, monitoring, and managing of volcanic hazards. Monitoring organizations, like the Alaska Volcano Observatory (AVO), are nowadays heavily relying on remote sensing data from a variety of optical and thermal sensors to provide time-critical hazard information. Despite the high utilization of these remote sensing data to detect and monitor volcanic eruptions, the presence of clouds and a dependence on solar illumination often limit their impact on decision making processes. Synthetic Aperture Radar (SAR) systems are widely believed to be superior to optical sensors in operational monitoring situations, due to the weather and illumination independence of their observations and the sensitivity of SAR to surface changes and deformation. Despite these benefits, the contributions of SAR to operational volcano monitoring have been limited in the past due to (1) high SAR data costs, (2) traditionally long data processing times, and (3) the low temporal sampling frequencies inherent to most SAR systems. In this study, we present improved data access, data processing, and data integration techniques that mitigate some of the above mentioned limitations and allow, for the first time, a meaningful integration of SAR into operational volcano monitoring systems. We will introduce a new database interface that was developed in cooperation with the Alaska Satellite Facility (ASF) and allows for rapid and seamless data access to all of ASF's SAR data holdings. We will also present processing techniques that improve the temporal frequency with which hazard-related products can be produced. These techniques take advantage of modern signal processing technology as well as new radiometric normalization schemes, both enabling the combination of multiple observation geometries in change detection procedures. Additionally, it will be shown how SAR-based hazard information can be integrated with data from optical satellites, thermal sensors, webcams and models to create near-real time volcano hazard information. We will introduce a prototype monitoring system that integrates SAR-based hazard information into the near real-time volcano hazard monitoring system of the Alaska Volcano Observatory. This prototype system was applied to historic eruptions of the volcanoes Okmok and Augustine, both located in the North Pacific. We will show that for these historic eruptions, the addition of SAR data lead to a significant improvement in activity detection and eruption monitoring, and improved the accuracy and timeliness of eruption alerts.

T-2 mycotoxin: toxicological effects and decontamination strategies

PubMed Central

Adhikari, Manish; Negi, Bhawana; Kaushik, Neha; Adhikari, Anupriya; Al-Khedhairy, Abdulaziz A.; Kaushik, Nagendra Kumar; Choi, Eun Ha

2017-01-01

Mycotoxins are highly diverse secondary metabolites produced in nature by a wide variety of fungus which causes food contamination, resulting in mycotoxicosis in animals and humans. In particular, trichothecenes mycotoxin produced by genus fusarium is agriculturally more important worldwide due to the potential health hazards they pose. It is mainly metabolized and eliminated after ingestion, yielding more than 20 metabolites with the hydroxy trichothecenes-2 toxin being the major metabolite. Trichothecene is hazardously intoxicating due to their additional potential to be topically absorbed, and their metabolites affect the gastrointestinal tract, skin, kidney, liver, and immune and hematopoietic progenitor cellular systems. Sensitivity to this type of toxin varying from dairy cattle to pigs, with the most sensitive endpoints being neural, reproductive, immunological and hematological effects. The mechanism of action mainly consists of the inhibition of protein synthesis and oxidative damage to cells followed by the disruption of nucleic acid synthesis and ensuing apoptosis. In this review, the possible hazards, historical significance, toxicokinetics, and the genotoxic and cytotoxic effects along with regulatory guidelines and recommendations pertaining to the trichothecene mycotoxin are discussed. Furthermore, various techniques utilized for toxin determination, pathophysiology, prophylaxis and treatment using herbal antioxidant compounds and regulatory guidelines and recommendations are reviewed. The prospects of the trichothecene as potential hazardous agents, decontamination strategies and future perspectives along with plausible therapeutic uses are comprehensively described. PMID:28430618

Piecewise exponential models to assess the influence of job-specific experience on the hazard of acute injury for hourly factory workers

PubMed Central

2013-01-01

Background An inverse relationship between experience and risk of injury has been observed in many occupations. Due to statistical challenges, however, it has been difficult to characterize the role of experience on the hazard of injury. In particular, because the time observed up to injury is equivalent to the amount of experience accumulated, the baseline hazard of injury becomes the main parameter of interest, excluding Cox proportional hazards models as applicable methods for consideration. Methods Using a data set of 81,301 hourly production workers of a global aluminum company at 207 US facilities, we compared competing parametric models for the baseline hazard to assess whether experience affected the hazard of injury at hire and after later job changes. Specific models considered included the exponential, Weibull, and two (a hypothesis-driven and a data-driven) two-piece exponential models to formally test the null hypothesis that experience does not impact the hazard of injury. Results We highlighted the advantages of our comparative approach and the interpretability of our selected model: a two-piece exponential model that allowed the baseline hazard of injury to change with experience. Our findings suggested a 30% increase in the hazard in the first year after job initiation and/or change. Conclusions Piecewise exponential models may be particularly useful in modeling risk of injury as a function of experience and have the additional benefit of interpretability over other similarly flexible models. PMID:23841648

Effects of arcing due to spacecraft charging on spacecraft survival

NASA Technical Reports Server (NTRS)

Rosen, A.; Sanders, N. L.; Ellen, J. M., Jr.; Inouye, G. T.

1978-01-01

A quantitative assessment of the hazard associated with spacecraft charging and arcing on spacecraft systems is presented. A literature survey on arc discharge thresholds and characteristics was done and gaps in the data and requirements for additional experiments were identified. Calculations of coupling of arc discharges into typical spacecraft systems were made and the susceptibility of typical spacecraft to disruption by arc discharges was investigated. Design guidelines and recommended practices to reduce or eliminate the threat of malfunction and failures due to spacecraft charging/arcing were summarized.

Landfill leachate sludge use as soil additive prior and after electrocoagulation treatment: A cytological assessment using CHO-k1 cells.

PubMed

Morozesk, M; Bonomo, M M; Rocha, L D; Duarte, I D; Zanezi, E R L; Jesus, H C; Fernandes, M N; Matsumoto, S T

2016-09-01

Electrocoagulation has recently attracted attention as a potential technique for treating toxic effluents due to its versatility and environmental compatibility, generating a residue chemically suitable to be used as a soil additive. In the present study, landfill leachate sludge hazardous effects were investigated prior and after electrocoagulation process using in vitro assays with the mammalian cells CHO-k1. An integrated strategy for risk assessment was used to correctly estimate the possible adverse landfill leachate sludge effects on human health and ecosystem. Electrocoagulation process proved to be an effective treatment due to possibility to improve effluent adverse characteristics and produce sludge with potential to be used as soil additive. Despite low cytoxicity, the residue presented genotoxic and mutagenic effects, indicating a capacity to induce genetic damages, probably due to induction of polyploidization process in cells. The observed effects demand an improvement of waste management methods for reduce negative risks of landfill leachate sludge application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing Natural Hazard Vulnerability Through Marmara Region Using GIS

NASA Astrophysics Data System (ADS)

Sabuncu, A.; Garagon Dogru, A.; Ozener, H.

2013-12-01

Natural hazards are natural phenomenon occured in the Earth's system that include geological and meteorological events such as earthquakes, floods, landslides, droughts, fires and tsunamis. The metropolitan cities are vulnerable to natural hazards due to their population densities, industrial facilities and proporties. The urban layout of the megacities are complex since industrial facilities are interference with residential area. The Marmara region is placed in North-western Turkey suffered from natural hazards (earthquakes, floods etc.) for years. After 1999 Kocaeli and Duzce earthquakes and 2009 Istanbul flash floods, dramatic number of casualities and economic losses were reported by the authorities. Geographic information systems (GIS) have substantial capacity in order to develop natural disaster management. As these systems provide more efficient and reliable analysis and evaluation of the data in the management, and also convenient and better solutions for the decision making before during and after the natural hazards. The Earth science data and socio-economic data can be integrated into a GIS as different layers. Additionally, satellite data are used to understand the changes pre and post the natural hazards. GIS is a powerful software for the combination of different type of digital data. A natural hazard database for the Marmara region provides all different types of digital data to the users. All proper data collection processing and analysing are critical to evaluate and identify hazards. The natural hazard database allows users to monitor, analyze and query past and recent disasters in the Marmara Region. The long term aim of this study is to develop geodatabase and identify the natural hazard vulnerabilities of the metropolitan cities.

Safety practices in Jordanian manufacturing enterprises within industrial estates.

PubMed

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

Application of waterproof breathable fabric in thermal protective clothing exposed to hot water and steam

NASA Astrophysics Data System (ADS)

Su, Y.; Li, R.; Song, G.; Li, J.

2017-10-01

A hot water and steam tester was used to examine thermal protective performance of waterproof and breathable fabric against hot water and steam hazards. Time to cause skin burn and thermal energy absorbed by skin during exposure and cooling phases was employed to characterize the effect of configuration, placing order and properties of waterproof and breathable fabric on the thermal protective performance. The difference of thermal protective performance due to hot water and steam hazards was discussed. The result showed that the configuration of waterproof and breathable fabric presented a significant effect on the thermal protective performance of single- and double-layer fabric system, while the difference between different configurations in steam hazard was greater than that in hot water hazard. The waterproof and breathable fabric as outer layer provided better protection than that as inner layer. Increasing thickness and moisture regain improved the thermal protective performance of fabric system. Additionally, the thermal energy absorbed by skin during the cooling phase was affected by configuration, thickness and moisture regain of fabric. The findings will provide technical data to improve performance of thermal protective clothing in hot water and steam hazards.

Radar image and data fusion for natural hazards characterisation

USGS Publications Warehouse

Lu, Zhong; Dzurisin, Daniel; Jung, Hyung-Sup; Zhang, Jixian; Zhang, Yonghong

2010-01-01

Fusion of synthetic aperture radar (SAR) images through interferometric, polarimetric and tomographic processing provides an all - weather imaging capability to characterise and monitor various natural hazards. This article outlines interferometric synthetic aperture radar (InSAR) processing and products and their utility for natural hazards characterisation, provides an overview of the techniques and applications related to fusion of SAR/InSAR images with optical and other images and highlights the emerging SAR fusion technologies. In addition to providing precise land - surface digital elevation maps, SAR - derived imaging products can map millimetre - scale elevation changes driven by volcanic, seismic and hydrogeologic processes, by landslides and wildfires and other natural hazards. With products derived from the fusion of SAR and other images, scientists can monitor the progress of flooding, estimate water storage changes in wetlands for improved hydrological modelling predictions and assessments of future flood impacts and map vegetation structure on a global scale and monitor its changes due to such processes as fire, volcanic eruption and deforestation. With the availability of SAR images in near real - time from multiple satellites in the near future, the fusion of SAR images with other images and data is playing an increasingly important role in understanding and forecasting natural hazards.

Interaction Effects of Acute Kidney Injury, Acute Respiratory Failure, and Sepsis on 30-Day Postoperative Mortality in Patients Undergoing High-Risk Intraabdominal General Surgical Procedures.

PubMed

Kim, Minjae; Brady, Joanne E; Li, Guohua

2015-12-01

Acute kidney injury (AKI), acute respiratory failure, and sepsis are distinct but related pathophysiologic processes. We hypothesized that these 3 processes may interact to synergistically increase the risk of short-term perioperative mortality in patients undergoing high-risk intraabdominal general surgery procedures. We performed a retrospective, observational cohort study of data (2005-2011) from the American College of Surgeons-National Surgical Quality Improvement Program, a high-quality surgical outcomes data set. High-risk procedures were those with a risk of AKI, acute respiratory failure, or sepsis greater than the average risk in all intraabdominal general surgery procedures. The effects of AKI, acute respiratory failure, and sepsis on 30-day mortality were assessed using a Cox proportional hazards model. Additive interactions were assessed with the relative excess risk due to interaction. Of 217,994 patients, AKI, acute respiratory failure, and sepsis developed in 1.3%, 3.7%, and 6.8%, respectively. The 30-day mortality risk with sepsis, acute respiratory failure, and AKI were 11.4%, 24.1%, and 25.1%, respectively, compared with 0.85% without these complications. The adjusted hazard ratios and 95% confidence intervals for a single complication (versus no complication) on mortality were 7.24 (6.46-8.11), 10.8 (8.56-13.6), and 14.2 (12.8-15.7) for sepsis, AKI, and acute respiratory failure, respectively. For 2 complications, the adjusted hazard ratios were 30.8 (28.0-33.9), 42.6 (34.3-52.9), and 65.2 (53.9-78.8) for acute respiratory failure/sepsis, AKI/sepsis, and acute respiratory failure/AKI, respectively. Finally, the adjusted hazard ratio for all 3 complications was 105 (92.8-118). Positive additive interactions, indicating synergism, were found for each combination of 2 complications. The relative excess risk due to interaction for all 3 complications was not statistically significant. In high-risk general surgery patients, the development of AKI, acute respiratory failure, or sepsis is independently associated with an increase in 30-day mortality. In addition, the development of 2 complications shows significant positive additive interactions to further increase the risk of mortality. Our findings suggest that interactions between these 3 perioperative complications increase the risk of mortality more than would be expected by the independent effects of each complication alone.

Human health risk assessment of pharmaceuticals and personal care products in plant tissue due to biosolids and manure amendments, and wastewater irrigation.

PubMed

Prosser, R S; Sibley, P K

2015-02-01

Amending soil with biosolids or livestock manure provides essential nutrients in agriculture. Irrigation with wastewater allows for agriculture in regions where water resources are limited. However, biosolids, manure and wastewater have all been shown to contain pharmaceuticals and personal care products (PPCPs). Studies have shown that PPCPs can accumulate in the tissues of plants but the risk that accumulated residues may pose to humans via consumption of edible portions is not well documented. This study reviewed the literature for studies that reported residues of PPCPs in the edible tissue of plants grown in biosolids- or manure-amended soils or irrigated with wastewater. These residues were used to determine the estimated daily intake of PPCPs for an adult and toddler. Estimated daily intake values were compared to acceptable daily intakes to determine whether PPCPs in plant tissue pose a hazard to human health. For all three amendment practices, the majority of reported residues resulted in hazard quotients <0.1. Amendment with biosolids or manure resulted in hazard quotients ≥0.1 for carbamazepine, diphenhydramine, salbutamol, triclosan, and sulfamethazine. Irrigation with wastewater resulted in hazard quotients of ≥0.1 for ambrettolid, carbamazepine, diclofenac, flunixin, lamotrigine, metoprolol, naproxen, sildenafil and tonalide. [corrected]. Many of the residues that resulted in hazard quotients ≥0.1 were due to exposing plants to concentrations of PPCPs that would not be considered relevant based on concentrations reported in biosolids and manure or unrealistic methods of exposure, which lead to artificially elevated plant residues. Our assessment indicates that the majority of individual PPCPs in the edible tissue of plants due to biosolids or manure amendment or wastewater irrigation represent a de minimis risk to human health. Assuming additivity, the mixture of PPCPs could potentially present a hazard. Further work needs to be done to assess the risk of the mixture of PPCPs that may be present in edible tissue of plants grown under these three amendment practices. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hazard assessment of hydraulic fracturing chemicals using an indexing method.

PubMed

Hu, Guangji; Liu, Tianyi; Hager, James; Hewage, Kasun; Sadiq, Rehan

2018-04-01

The rapid expansion of unconventional natural gas production has triggered considerable public concerns, particularly regarding environmental and human health (EHH) risks posed by various chemical additives used in hydraulic fracturing (HF) operations. There is a need to assess the potential EHH hazards of additives used in real-world HF operations. In this study, HF additive and fracturing fluid data was acquired, and EHH hazards were assessed using an indexing approach. The indexing system analyzed chemical toxicological data of different ingredients contained within additives and produced an aggregated EHH safety index for each additive, along with an indicator describing the completeness of the chemical toxicological data. The results show that commonly used additives are generally associated with medium-level EHH hazards. In each additive category, ingredients of high EHH concern were identified, and the high hazard designation was primarily attributed to ingredients' high aquatic toxicity and carcinogenic effects. Among all assessed additive categories, iron control agents were identified as the greatest EHH hazards. Lack of information, such as undisclosed ingredients and chemical toxicological data gaps, has resulted in different levels of assessment uncertainties. In particular, friction reducers show the highest data incompleteness with regards to EHH hazards. This study reveals the potential EHH hazards associated with chemicals used in current HF field operations and can provide decision makers with valuable information to facilitate sustainable and responsible unconventional gas production. Copyright © 2017 Elsevier B.V. All rights reserved.

Doubly Robust Additive Hazards Models to Estimate Effects of a Continuous Exposure on Survival.

PubMed

Wang, Yan; Lee, Mihye; Liu, Pengfei; Shi, Liuhua; Yu, Zhi; Abu Awad, Yara; Zanobetti, Antonella; Schwartz, Joel D

2017-11-01

The effect of an exposure on survival can be biased when the regression model is misspecified. Hazard difference is easier to use in risk assessment than hazard ratio and has a clearer interpretation in the assessment of effect modifications. We proposed two doubly robust additive hazards models to estimate the causal hazard difference of a continuous exposure on survival. The first model is an inverse probability-weighted additive hazards regression. The second model is an extension of the doubly robust estimator for binary exposures by categorizing the continuous exposure. We compared these with the marginal structural model and outcome regression with correct and incorrect model specifications using simulations. We applied doubly robust additive hazard models to the estimation of hazard difference of long-term exposure to PM2.5 (particulate matter with an aerodynamic diameter less than or equal to 2.5 microns) on survival using a large cohort of 13 million older adults residing in seven states of the Southeastern United States. We showed that the proposed approaches are doubly robust. We found that each 1 μg m increase in annual PM2.5 exposure was associated with a causal hazard difference in mortality of 8.0 × 10 (95% confidence interval 7.4 × 10, 8.7 × 10), which was modified by age, medical history, socioeconomic status, and urbanicity. The overall hazard difference translates to approximately 5.5 (5.1, 6.0) thousand deaths per year in the study population. The proposed approaches improve the robustness of the additive hazards model and produce a novel additive causal estimate of PM2.5 on survival and several additive effect modifications, including social inequality.

Shelf-Life Specifications for Mission Readiness

DTIC Science & Technology

1993-03-01

R applies to this item. Arthur D Little t.𔃻.., 4-48 NSN: 7930009353794 Name: Polish , Plastic Description: White lotion with a slight odor Intended...MISSION READINESS TC•T I AR16 19931 Abstract The Navy disposes of tons of hazardous material as hazardous waste due to the expiration of excessively...of hazardous material as hazardous waste due to the expiration of excessively conservati’e shielf-Ihfe terms. In order to reduce this occurrence, the

The moderating role of implicit alcohol-related cognitions in hazardous alcohol use

PubMed Central

Cavanagh, Lucia; Obasi, Ezemenari M.

2015-01-01

The present study applied the Go/No-Go Association Test (GNAT; Nosek & Banaji, 2001) to measure alcohol-related implicit cognitions. Additionally, it assessed the role of implicit cognitions as a potential moderator in the relationship between explicit predictors of alcohol use and hazardous drinking behavior. University undergraduate students (N = 214) completed self-report questionnaires assessing reasons for drinking and reported alcohol use. Participants also completed two GNATs assessing implicit-alcohol-related cognitions associated with attitude (good-bad) and perceived safety (safe-dangerous). As expected, participants held implicit appraisals of alcohol as ‘‘bad’’ and ‘‘dangerous’’ in the context of nonalcoholic drinks, and as ‘‘good’’ and ‘‘safe’’ in the context of licit and illicit drugs. Implicit alcohol-related cognitions moderated the relationship between drinking to cope with negative affect and hazardous drinking and drinking due to cues or craving and hazardous drinking. These findings highlight the multidimensional nature of implicit cognitions and the role of negative implicit alcohol-related associations in moderating relationships between explicit processes and subsequent alcohol use behaviors. PMID:26989352

76 FR 35104 - Safety Zone; Waterway Closure, Atchafalaya River From Mile Marker 117 (Morgan City Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... from destruction, loss or injury due to hazards associated with rising flood water. DATES: Effective... destruction, loss or injury due to the hazards associated with rising flood water. Notifications to the marine..., levee system, vessels and tows from the hazards associated with rising flood water on the Atchafalaya...

Occupational and environmental health hazards in the plastics industry.

PubMed Central

Eckardt, R E

1976-01-01

A brief description of the potential occupational health hazards encountered in the manufacture of plastics (polymers) is given. In general, these hazards are due to the monomers used to make the various plastics, to unreacted monomer contained within the finished products, and to the fillers, stabilizers, pigments, inhibitors, and initiators used in fabricating the finished products. They run the gamut from angiosarcomas of the liver due to vinyl chloride, to dermatitis and asthma-like reactions due to the initiators used with epoxy resins. PMID:140799

76 FR 36314 - Safety Zone; Mile Marker 98.5 West of Harvey Lock Gulf Intracoastal Waterway to Mile Marker 108.5...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-22

..., levee system, vessels and tows from destruction, loss or injury due to hazards associated with rising... the general public, levee system, vessels and tows from the hazards associated with rising flood water... system, vessels and tows from destruction, loss or injury due to the hazards associated with rising flood...

Simplified training for hazardous materials management in developing countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braithwaite, J.

1994-12-31

There are thousands of dangerous situations happening daily in developing countries around the world involving untrained workers and hazardous materials. There are very few if any agencies in developing countries that are charged with ensuring safe and healthful working conditions. In addition to the problem of regulation and enforcement, there are potential training problems due to the level of literacy and degree of scientific background of these workers. Many of these workers are refugees from poorly developed countries who are willing to work no matter what the conditions. Training methods (standards) accepted as state of the art in the Unitedmore » States and other developed countries may not work well under the conditions found in developing countries. Because these methods may not be appropriate, new and novel ways to train workers quickly, precisely and economically in hazardous materials management should be developed. One approach is to develop training programs that use easily recognizable graphics with minimal verbal instruction, programs similar to the type used to teach universal international driving regulations and safety. The program as outlined in this paper could be tailored to any sized plant and any hazardous material handling or exposure situation. The situation in many developing countries is critical, development of simplified training methods for workers exposed to hazardous materials hold valuable market potential and are an opportunity for many underdeveloped countries to develop indigenous expertise in hazardous materials management.« less

Initiating Event Analysis of a Lithium Fluoride Thorium Reactor

NASA Astrophysics Data System (ADS)

Geraci, Nicholas Charles

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR. Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked "what-if?" questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity of the LFTR. The potential exists for unforeseen hazards to pose additional risk for the LFTR, but the scope of this thesis is limited to evaluation of those key hazards already identified by Flibe Energy. These key hazards are the starting point for the Initiating Event Analysis performed in this thesis. Engineering evaluation and technical study of the plant using a literature review and comparison to reference technology revealed four hazards with high potential to cause reactor core damage. To determine the initiating events resulting in realization of these four hazards, reference was made to previous PSAs and existing NRC and EPRI initiating event lists. Finally, fault tree and event tree analyses were conducted, completing the logical classification of initiating events. Results are qualitative as opposed to quantitative due to the early stages of system design descriptions and lack of operating experience or data for the LFTR. In summary, this thesis analyzes initiating events using previous research and inductive and deductive reasoning through traditional risk management techniques to arrive at a list of key initiating events that can be used to address vulnerabilities during the design phases of LFTR development.

Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Peter P.; Wagner, Katie A.

A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affectingmore » the public.« less

Flood Hazards: Communicating Hydrology and Complexity to the Public

NASA Astrophysics Data System (ADS)

Holmes, R. R.; Blanchard, S. F.; Mason, R. R.

2010-12-01

Floods have a major impact on society and the environment. Since 1952, approximately 1,233 of 1,931 (64%) Federal disaster declarations were due directly to flooding, with an additional 297 due to hurricanes which had associated flooding. Although the overall average annual number of deaths due to flooding has decreased in the United States, the average annual flood damage is rising. According to the Munich Reinsurance Company in their publication “Schadenspiegel 3/2005”, during 1990s the world experienced as much as $500 billion in economic losses due to floods, highlighting the serious need for continued emphasis on flood-loss prevention measures. Flood-loss prevention has two major elements: mitigation (including structural flood-control measures and land-use planning and regulation) and risk awareness. Of the two, increasing risk awareness likely offers the most potential for protecting lives over the near-term and long-term sustainability in the coming years. Flood-risk awareness and risk-aware behavior is dependent on communication, involving both prescriptive and educational measures. Prescriptive measures (for example, flood warnings and stormwater ordinances) are and have been effective, but there is room for improvement. New communications technologies, particularly social media utilizing mobile, smart phones and text devices, for example, could play a significant role in increasing public awareness of long-term risk and near-term flood conditions. The U.S. Geological Survey (USGS), for example, the Federal agency that monitors the Nation’s rivers, recently released a new service that can better connect the to the public to information about flood hazards. The new service, WaterAlert (URL: http://water.usgs.gov/wateralert/), allows users to set flood notification thresholds of their own choosing for any USGS real-time streamgage. The system then sends emails or text messages to subscribers whenever the threshold conditions are met, as often as the user specifies. In the future, with new GPS enabled cell-phones, notifications could be sent to users based on their proximity to flood hazards. Educational measures also should communicate the hydrologic underpinnings and uncertainties of the complex science of flood hydrology in an understandable manner to a non-technical public. Education can be especially beneficial and important for those in a policy-making role or those who find themselves in an area of potential flood hazards. Case studies, such as the fatal June 11, 2010 flash flood on the Little Missouri River in Arkansas, if presented in a way that the public will absorb, powerfully illustrate the importance of flood hazard awareness and the cost of living unaware. Additionally, such crucial points as the connection between the accuracy of flood-probability estimates and the density (and longevity) of the basic data sources (such as the USGS streamgage or the National Weather Service raingage networks) and the residual risks that both communities and individuals face have to continually be stressed to the general public and policy makers alike. In short, success in flood hazards communication (both prescriptive warnings and education) requires a fusion of the social sciences and hydrology.

Development of structural vulnerability curve associated with high magnitude torrent occurrences in Switzerland

NASA Astrophysics Data System (ADS)

Wing-Yuen Chow, Candace; Bründl, Michael; Keiler, Margreth

2017-04-01

In mountain regions, high economic losses have increased significantly in the past decades due to severe hazard processes, in spite of notable investments in hazard management. Assessing the vulnerability of built structures to high magnitude torrent events is a part of consequence analysis, where hazard intensity is related to the degree of loss sustained. While vulnerability curves have been developed for different countries, the presented work contributes new data from Swiss-based case studies that address a known gap associated with the consequences of high magnitude events. Data for this stage of the investigation communicates the degree of loss associated with affected structures and has been provided by local authorities dealing with natural hazards (e.g. Amt für Wald des Kantons Bern (KAWA) and cantonal insurance providers). Information used for the empirical quantification of vulnerability to torrent processes is derived from detailed post-event documentation and the loss database and verified with field visits. Building the initial database supports data sharing and the systematic inclusion of additional case studies as they become available. The collection of this new data is fundamental to the development of a local vulnerability curve based on observed sediment deposition heights, a proxy for describing hazard intensity. The result will then be compared to curves derived from Austrian and Italian datasets.

Comparison of empirical and data driven hydrometeorological hazard models on coastal cities of São Paulo, Brazil

NASA Astrophysics Data System (ADS)

Koga-Vicente, A.; Friedel, M. J.

2010-12-01

Every year thousands of people are affected by floods and landslide hazards caused by rainstorms. The problem is more serious in tropical developing countries because of the susceptibility as a result of the high amount of available energy to form storms, and the high vulnerability due to poor economic and social conditions. Predictive models of hazards are important tools to manage this kind of risk. In this study, a comparison of two different modeling approaches was made for predicting hydrometeorological hazards in 12 cities on the coast of São Paulo, Brazil, from 1994 to 2003. In the first approach, an empirical multiple linear regression (MLR) model was developed and used; the second approach used a type of unsupervised nonlinear artificial neural network called a self-organized map (SOM). By using twenty three independent variables of susceptibility (precipitation, soil type, slope, elevation, and regional atmospheric system scale) and vulnerability (distribution and total population, income and educational characteristics, poverty intensity, human development index), binary hazard responses were obtained. Model performance by cross-validation indicated that the respective MLR and SOM model accuracy was about 67% and 80%. Prediction accuracy can be improved by the addition of information, but the SOM approach is preferred because of sparse data and highly nonlinear relations among the independent variables.

Applying Additive Hazards Models for Analyzing Survival in Patients with Colorectal Cancer in Fars Province, Southern Iran

PubMed

Madadizadeh, Farzan; Ghanbarnejad, Amin; Ghavami, Vahid; Zare Bandamiri, Mohammad; Mohammadianpanah, Mohammad

2017-04-01

Introduction: Colorectal cancer (CRC) is a commonly fatal cancer that ranks as third worldwide and third and the fifth in Iranian women and men, respectively. There are several methods for analyzing time to event data. Additive hazards regression models take priority over the popular Cox proportional hazards model if the absolute hazard (risk) change instead of hazard ratio is of primary concern, or a proportionality assumption is not made. Methods: This study used data gathered from medical records of 561 colorectal cancer patients who were admitted to Namazi Hospital, Shiraz, Iran, during 2005 to 2010 and followed until December 2015. The nonparametric Aalen’s additive hazards model, semiparametric Lin and Ying’s additive hazards model and Cox proportional hazards model were applied for data analysis. The proportionality assumption for the Cox model was evaluated with a test based on the Schoenfeld residuals and for test goodness of fit in additive models, Cox-Snell residual plots were used. Analyses were performed with SAS 9.2 and R3.2 software. Results: The median follow-up time was 49 months. The five-year survival rate and the mean survival time after cancer diagnosis were 59.6% and 68.1±1.4 months, respectively. Multivariate analyses using Lin and Ying’s additive model and the Cox proportional model indicated that the age of diagnosis, site of tumor, stage, and proportion of positive lymph nodes, lymphovascular invasion and type of treatment were factors affecting survival of the CRC patients. Conclusion: Additive models are suitable alternatives to the Cox proportionality model if there is interest in evaluation of absolute hazard change, or no proportionality assumption is made. Creative Commons Attribution License

40 CFR 260.40 - Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Additional regulation of certain hazardous waste recycling activities on a case-by-case basis. 260.40 Section 260.40 Protection of... SYSTEM: GENERAL Rulemaking Petitions § 260.40 Additional regulation of certain hazardous waste recycling...

40 CFR 260.40 - Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Additional regulation of certain hazardous waste recycling activities on a case-by-case basis. 260.40 Section 260.40 Protection of... SYSTEM: GENERAL Rulemaking Petitions § 260.40 Additional regulation of certain hazardous waste recycling...

40 CFR 260.40 - Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Additional regulation of certain hazardous waste recycling activities on a case-by-case basis. 260.40 Section 260.40 Protection of... SYSTEM: GENERAL Rulemaking Petitions § 260.40 Additional regulation of certain hazardous waste recycling...

40 CFR 260.40 - Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Additional regulation of certain hazardous waste recycling activities on a case-by-case basis. 260.40 Section 260.40 Protection of... SYSTEM: GENERAL Rulemaking Petitions § 260.40 Additional regulation of certain hazardous waste recycling...

40 CFR 260.40 - Additional regulation of certain hazardous waste recycling activities on a case-by-case basis.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Additional regulation of certain hazardous waste recycling activities on a case-by-case basis. 260.40 Section 260.40 Protection of... SYSTEM: GENERAL Rulemaking Petitions § 260.40 Additional regulation of certain hazardous waste recycling...

The Relationship between Environmental Tobacco Smoke Exposure and Cardiovascular Disease and the Potential Modifying Effect of Diet in a Prospective Cohort among American Indians: The Strong Heart Study.

PubMed

Rajkumar, Sarah; Fretts, Amanda M; Howard, Barbara V; Yeh, Fawn; Clark, Maggie L

2017-05-09

American Indians experience high rates of cardiovascular diseases (CVD). Environmental tobacco smoke (ETS) has been linked to CVD, possibly due to pro-inflammatory and oxidative stress pathways. We examined the relationship between self-reported exposure to ETS and fatal and nonfatal CVD incidence using Cox proportional hazards models among 1843 non-smoking American Indians participating in the Strong Heart Study. We also evaluated potential modifying effects of several dietary nutrients high in anti-inflammatory and anti-oxidant properties with ETS exposure on fatal and nonfatal CVD by creating interaction terms between ETS exposure and the dietary variable. Participants exposed to ETS had a higher hazard (hazard ratio: 1.22; 95% confidence interval, 1.03 to 1.44) for developing CVD compared to persons not exposed. Interaction analyses suggested stronger effects of ETS on CVD incidence among those consuming diets lower in vitamin E as compared to those consuming higher amounts, particularly on the additive scale. Additional research is recommended to clarify whether public health prevention strategies should simultaneously target reductions in ETS exposures and improvements in diets that may exceed the expected benefits of targeting these risk factors separately.

The Relationship between Environmental Tobacco Smoke Exposure and Cardiovascular Disease and the Potential Modifying Effect of Diet in a Prospective Cohort among American Indians: The Strong Heart Study

PubMed Central

Rajkumar, Sarah; Fretts, Amanda M.; Howard, Barbara V.; Yeh, Fawn; Clark, Maggie L.

2017-01-01

American Indians experience high rates of cardiovascular diseases (CVD). Environmental tobacco smoke (ETS) has been linked to CVD, possibly due to pro-inflammatory and oxidative stress pathways. We examined the relationship between self-reported exposure to ETS and fatal and nonfatal CVD incidence using Cox proportional hazards models among 1843 non-smoking American Indians participating in the Strong Heart Study. We also evaluated potential modifying effects of several dietary nutrients high in anti-inflammatory and anti-oxidant properties with ETS exposure on fatal and nonfatal CVD by creating interaction terms between ETS exposure and the dietary variable. Participants exposed to ETS had a higher hazard (hazard ratio: 1.22; 95% confidence interval, 1.03 to 1.44) for developing CVD compared to persons not exposed. Interaction analyses suggested stronger effects of ETS on CVD incidence among those consuming diets lower in vitamin E as compared to those consuming higher amounts, particularly on the additive scale. Additional research is recommended to clarify whether public health prevention strategies should simultaneously target reductions in ETS exposures and improvements in diets that may exceed the expected benefits of targeting these risk factors separately. PMID:28486422

Examining psychosocial and physical hazards in the Ghanaian mining industry and their implications for employees' safety experience.

PubMed

Amponsah-Tawiah, Kwesi; Jain, Aditya; Leka, Stavroula; Hollis, David; Cox, Tom

2013-06-01

In addition to hazardous conditions that are prevalent in mines, there are various physical and psychosocial risk factors that can affect mine workers' safety and health. Without due diligence to mine safety, these risk factors can affect workers' safety experience, in terms of near misses, disabling injuries and accidents experienced or witnessed by workers. This study sets out to examine the effects of physical and psychosocial risk factors on workers' safety experience in a sample of Ghanaian miners. 307 participants from five mining companies responded to a cross sectional survey examining physical and psychosocial hazards and their implications for employees' safety experience. Zero-inflated Poisson regression models indicated that mining conditions, equipment, ambient conditions, support and security, and work demands and control are significant predictors of near misses, disabling injuries, and accidents experienced or witnessed by workers. The type of mine had important implications for workers' safety experience. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

Flooding Hazard Maps of Different Land Uses in Subsidence Area

NASA Astrophysics Data System (ADS)

Lin, Yongjun; Chang, Hsiangkuan; Tan, Yihchi

2017-04-01

This study aims on flooding hazard maps of different land uses in the subsidence area of southern Taiwan. Those areas are low-lying due to subsidence resulting from over pumping ground water for aquaculture. As a result, the flooding due to storm surges and extreme rainfall are frequent in this area and are expected more frequently in the future. The main land uses there include: residence, fruit trees, and aquaculture. The hazard maps of the three land uses are investigated. The factors affecting hazards of different land uses are listed below. As for residence, flooding depth, duration of flooding, and rising rate of water surface level are factors affecting its degree of hazard. High flooding depth, long duration of flooding, and fast rising rate of water surface make residents harder to evacuate. As for fruit trees, flooding depth and duration of flooding affects its hazard most due to the root hypoxia. As for aquaculture, flooding depth affects its hazard most because the high flooding depth may cause the fish flush out the fishing ponds. An overland flow model is used for simulations of hydraulic parameters for factors such as flooding depth, rising rate of water surface level and duration of flooding. As above-mentioned factors, the hazard maps of different land uses can be made and high hazardous are can also be delineated in the subsidence areas.

Polyester Resin Hazards

PubMed Central

Bourne, L. B.; Milner, F. J. M.

1963-01-01

Polyester resins are being increasingly used in industry. These resins require the addition of catalysts and accelerators. The handling of polyester resin system materials may give rise to skin irritations, allergic reactions, and burns. The burns are probably due to styrene and organic peroxides. Atmospheric pollution from styrene and explosion and fire risks from organic peroxides must be prevented. Where dimethylaniline is used scrupulous cleanliness and no-touch technique must be enforced. Handling precautions are suggested. Images PMID:14014495

Perceived neighborhood safety and incident mobility disability among elders: the hazards of poverty.

PubMed

Clark, Cheryl R; Kawachi, Ichiro; Ryan, Louise; Ertel, Karen; Fay, Martha E; Berkman, Lisa F

2009-05-28

We investigated whether lack of perceived neighborhood safety due to crime, or living in high crime neighborhoods was associated with incident mobility disability in elderly populations. We hypothesized that low-income elders and elders at retirement age (65 - 74) would be at greatest risk of mobility disability onset in the face of perceived or measured crime-related safety hazards. We conducted the study in the New Haven Established Populations for Epidemiologic Studies of the Elderly (EPESE), a longitudinal cohort study of community-dwelling elders aged 65 and older who were residents of New Haven, Connecticut in 1982. Elders were interviewed beginning in 1982 to assess mobility (ability to climb stairs and walk a half mile), perceptions of their neighborhood safety due to crime, annual household income, lifestyle characteristics (smoking, alcohol use, physical activity), and the presence of chronic co-morbid conditions. Additionally, we collected baseline data on neighborhood crime events from the New Haven Register newspaper in 1982 to measure local area crime rates at the census tract level. At baseline in 1982, 1,884 elders were without mobility disability. After 8 years of follow-up, perceiving safety hazards was associated with increased risk of mobility disability among elders at retirement age whose incomes were below the federal poverty line (HR 1.56, 95% CI 1.02 - 2.37). No effect of perceived safety hazards was found among elders at retirement age whose incomes were above the poverty line. No effect of living in neighborhoods with high crime rates (measured by newspaper reports) was found in any sub-group. Perceiving a safety hazard due to neighborhood crime was associated with increased risk of incident mobility disability among impoverished elders near retirement age. Consistent with prior literature, retirement age appears to be a vulnerable period with respect to the effect of neighborhood conditions on elder health. Community violence prevention activities should address perceived safety among vulnerable populations, such as low-income elders at retirement age, to reduce future risks of mobility disability.

Perceived neighborhood safety and incident mobility disability among elders: the hazards of poverty

PubMed Central

Clark, Cheryl R; Kawachi, Ichiro; Ryan, Louise; Ertel, Karen; Fay, Martha E; Berkman, Lisa F

2009-01-01

Background We investigated whether lack of perceived neighborhood safety due to crime, or living in high crime neighborhoods was associated with incident mobility disability in elderly populations. We hypothesized that low-income elders and elders at retirement age (65 – 74) would be at greatest risk of mobility disability onset in the face of perceived or measured crime-related safety hazards. Methods We conducted the study in the New Haven Established Populations for Epidemiologic Studies of the Elderly (EPESE), a longitudinal cohort study of community-dwelling elders aged 65 and older who were residents of New Haven, Connecticut in 1982. Elders were interviewed beginning in 1982 to assess mobility (ability to climb stairs and walk a half mile), perceptions of their neighborhood safety due to crime, annual household income, lifestyle characteristics (smoking, alcohol use, physical activity), and the presence of chronic co-morbid conditions. Additionally, we collected baseline data on neighborhood crime events from the New Haven Register newspaper in 1982 to measure local area crime rates at the census tract level. Results At baseline in 1982, 1,884 elders were without mobility disability. After 8 years of follow-up, perceiving safety hazards was associated with increased risk of mobility disability among elders at retirement age whose incomes were below the federal poverty line (HR 1.56, 95% CI 1.02 – 2.37). No effect of perceived safety hazards was found among elders at retirement age whose incomes were above the poverty line. No effect of living in neighborhoods with high crime rates (measured by newspaper reports) was found in any sub-group. Conclusion Perceiving a safety hazard due to neighborhood crime was associated with increased risk of incident mobility disability among impoverished elders near retirement age. Consistent with prior literature, retirement age appears to be a vulnerable period with respect to the effect of neighborhood conditions on elder health. Community violence prevention activities should address perceived safety among vulnerable populations, such as low-income elders at retirement age, to reduce future risks of mobility disability. PMID:19476610

Application of a non-hazardous vital dye for cell counting with automated cell counters.

PubMed

Kim, Soo In; Kim, Hyun Jeong; Lee, Ho-Jae; Lee, Kiwon; Hong, Dongpyo; Lim, Hyunchang; Cho, Keunchang; Jung, Neoncheol; Yi, Yong Weon

2016-01-01

Recent advances in automated cell counters enable us to count cells more easily with consistency. However, the wide use of the traditional vital dye trypan blue (TB) raises environmental and health concerns due to its potential teratogenic effects. To avoid this chemical hazard, it is of importance to introduce an alternative non-hazardous vital dye that is compatible with automated cell counters. Erythrosin B (EB) is a vital dye that is impermeable to biological membranes and is used as a food additive. Similarly to TB, EB stains only nonviable cells with disintegrated membranes. However, EB is less popular than TB and is seldom used with automated cell counters. We found that cell counting accuracy with EB was comparable to that with TB. EB was found to be an effective dye for accurate counting of cells with different viabilities across three different automated cell counters. In contrast to TB, EB was less toxic to cultured HL-60 cells during the cell counting process. These results indicate that replacing TB with EB for use with automated cell counters will significantly reduce the hazardous risk while producing comparable results. Copyright © 2015 Logos Biosystems, Inc. Published by Elsevier Inc. All rights reserved.

Land management decisions in a carbonatic geo-environment

NASA Astrophysics Data System (ADS)

Siska, P.; Hung, I.-K.

2017-10-01

Land is the uppermost territorial unit of the earth’s surface that is quasi-homogeneous in its physical, natural, and also anthropogenic properties. The fundamental component of land is lithosphere. The focus of this work is on a carbonatic geo-environment that is dominantly characterized by Mesozoic rock complexes, significant chemical weathering, and a set of landforms that are unique to this type of a geological structures. In general, optimal land management is a composite of land sharing and land sparing practices; however, in order to answer the question: ‘What is a parcel of land best suited for?’ often requires well-organized spatial data. In this work, we have focused on developing a model that would evaluate the suitability of a carbonatic geo-environment for land management practices. Due to the potential hazards of some sinkhole infested areas, the risk of natural hazards must be first evaluated. In addition, the level of hazards depends on population pressure and the intensity of human impact on this particular environment. In this research, we have applied the principles of geostatistics to evaluate the probabilities for sinkhole hazards as well as fuzzy logic to evaluate the suitability of land sharing and land sparing management.

Seismic hazards in Thailand: a compilation and updated probabilistic analysis

NASA Astrophysics Data System (ADS)

Pailoplee, Santi; Charusiri, Punya

2016-06-01

A probabilistic seismic hazard analysis (PSHA) for Thailand was performed and compared to those of previous works. This PSHA was based upon (1) the most up-to-date paleoseismological data (slip rates), (2) the seismic source zones, (3) the seismicity parameters ( a and b values), and (4) the strong ground-motion attenuation models suggested as being suitable models for Thailand. For the PSHA mapping, both the ground shaking and probability of exceedance (POE) were analyzed and mapped using various methods of presentation. In addition, site-specific PSHAs were demonstrated for ten major provinces within Thailand. For instance, a 2 and 10 % POE in the next 50 years of a 0.1-0.4 g and 0.1-0.2 g ground shaking, respectively, was found for western Thailand, defining this area as the most earthquake-prone region evaluated in Thailand. In a comparison between the ten selected specific provinces within Thailand, the Kanchanaburi and Tak provinces had comparatively high seismic hazards, and therefore, effective mitigation plans for these areas should be made. Although Bangkok was defined as being within a low seismic hazard in this PSHA, a further study of seismic wave amplification due to the soft soil beneath Bangkok is required.

A Gis Model Application Supporting The Analysis of The Seismic Hazard For The Urban Area of Catania (italy)

NASA Astrophysics Data System (ADS)

Grasso, S.; Maugeri, M.

After the Summit held in Washington on August 20-22 2001 to plan the first World Conference on the mitigation of Natural Hazards, a Group for the analysis of Natural Hazards within the Mediterranean area has been formed. The Group has so far determined the following hazards: (1) Seismic hazard (hazard for historical buildings included); (2) Hazard linked to the quantity and quality of water; (3) Landslide hazard; (4) Volcanic hazard. The analysis of such hazards implies the creation and the management of data banks, which can only be used if the data are properly geo-settled to allow a crossed use of them. The obtained results must be therefore represented on geo-settled maps. The present study is part of a research programme, namely "Detailed Scenarios and Actions for Seismic Prevention of Damage in the Urban Area of Catania", financed by the National Department for the Civil Protection and the National Research Council-National Group for the Defence Against Earthquakes (CNR-GNDT). Nowadays the south-eastern area of Sicily, called the "Iblea" seismic area of Sicily, is considered as one of the most intense seismic zones in Italy, based on the past and current seismic history and on the typology of civil buildings. Safety against earthquake hazards has two as pects: structural safety against potentially destructive dynamic forces and site safety related to geotechnical phenomena such as amplification, land sliding and soil liquefaction. So the correct evaluation of seismic hazard is highly affected by risk factors due to geological nature and geotechnical properties of soils. The effect of local geotechnical conditions on damages suffered by buildings under seismic conditions has been widely recognized, as it is demonstrated by the Manual for Zonation on Seismic Geotechnical Hazards edited by the International Society for Soil Mechanics and Geotechnical Engineering (TC4, 1999). The evaluation of local amplification effects may be carried out by means of either rigorous complex methods of analysis or qualitative procedures. A semi quantitative procedure based on the definition of the geotechnical hazard index has been applied for the zonation of the seismic geotechnical hazard of the city of Catania. In particular this procedure has been applied to define the influence of geotechnical properties of soil in a central area of the city of Catania, where some historical buildings of great importance are sited. It was also performed an investigation based on the inspection of more than one hundred historical ecclesiastical buildings of great importance, located in the city. Then, in order to identify the amplification effects due to the site conditions, a geotechnical survey form was prepared, to allow a semi quantitative evaluation of the seismic geotechnical hazard for all these historical buildings. In addition, to evaluate the foundation soil time -history response, a 1-D dynamic soil model was employed for all these buildings, considering the non linearity of soil behaviour. Using a GIS, a map of the seismic geotechnical hazard, of the liquefaction hazard and a preliminary map of the seismic hazard for the city of Catania have been obtained. From the analysis of obtained results it may be noticed that high hazard zones are mainly clayey sites

The hazardous hexavalent chromium formed on trivalent chromium conversion coating: The origin, influence factors and control measures.

PubMed

Li, Jinhua; Yao, Chenlan; Liu, Yanbiao; Li, Di; Zhou, Baoxue; Cai, Weimin

2012-06-30

In this paper, the effects of processing parameters and constituents of treating-agent on the presence of hazardous hexavalent chromium on trivalent chromium conversion coating were studied. Results showed that shorter immersion time, lower bath pH value as well as lower working and baking temperatures retarded the presence of hexavalent chromium. In addition, the concentration of hexavalent chromium on conversion coatings prepared by the oxalic acid treating-agent was far greater than those on conversion coatings prepared by formic acid and acetic acid treating-agents. Results also indicated that the concentration of hexavalent chromium on conversion coatings was enhanced due to the addition of bivalent cobalt and nitrate anion in treating-agent, especially for oxalic acid conversion coating. However, the addition of hydroxyl compound d-gluconic acid in treating-agent could reduce the concentration of hexavalent chromium effectively. Moreover, a possible formation mechanism of hexavalent chromium on trivalent conversion coating was proposed. Findings of this study provide a better understanding of the formation of hexavalent chromium on trivalent chromium conversion coating and can facilitate the management of trivalent chromium treating-agents and trivalent chromium fasteners. Copyright © 2012 Elsevier B.V. All rights reserved.

Hazardous, harmful and dependent drinking in hostel-dwelling students at the University of the Free State, Bloemfontein: a cross-sectional study.

PubMed

van Zyl, Paulina; Botha, Julie; van Wyk, Michelle; Breytenbach, Jaco; Nel, Christiaan; van Niekerk, Michael; Breytenbach, Wilma

2015-01-01

This study was conducted to determine the prevalence of hazardous, harmful and dependent drinking among hostel-dwelling students on the main campus of the University of the Free State (UFS), and the influence of sex and academic year on the habit. A quarter of all hostel-dwelling students of UFS were selected by systematic random sampling. Willing participants completed a questionnaire comprising a demographic section and the Alcohol Use Disorders Identification Test (AUDIT). Of the 339 participants with total AUDIT scores, 15.6% exhibited hazardous drinking, 4.1% harmful drinking and 5.6% alcohol dependence. Male students had a statistically significant higher prevalence (32.8%) of hazardous, harmful or dependent drinking than female students (18.9%). Women, however, are biologically more vulnerable to the ill effects of alcohol due to altered pharmacokinetics and pharmacodynamics of alcohol. In addition, intoxicated women suffer more biological and social risks. When the cut-off point for hazardous drinking was adapted to account for the increased biological vulnerability of women, the difference between female and male participants was no longer significant. First year male students were less likely to engage in unsafe drinking than senior students. Female students in the alcohol dependent category showed an increasing trend over advancing academic year. Follow-up studies are needed to confirm whether a significant difference in hazardous drinking of first year male students compared to seniors reflects the influence of university policy or merely precedes drinking acculturation.

Hazards posed by distal ash transport and sedimentation from extreme volcanic eruptions

NASA Astrophysics Data System (ADS)

Sahagian, D. L.; Proussevitch, A. A.; White, C. M.; Klewicki, J.

2016-12-01

Volcanic ash injected into the upper troposphere and lower stratosphere poses a significant hazard to aviation and human security as a result of extreme, explosive eruptions. These have occurred in the recent geologic past, and are expected to occur again, now that modern society and its infrastructure is far more vulnerable than ever before. Atmospheric transport, dispersion, and sedimentation of Ash particles is controlled by fundamentally different processes than control other particles normally transported in the atmosphere due to their complex internal and external morphology. It is thus necessary to elucidate the fundamental processes of particle-fluid interactions in the upper troposphere and lower stratosphere, where most air traffic resides, and thereby enhance the capability of volcanic ash transport models to predict the ash concentration in distal regions that pose aviation and other hazards. Current Volcanic Ash Transport and Dispersion (VATD) models use simplistic stokes settling velocities for larger ash particles, and treat smaller ash particles (that are a large part of the hazard) merely as passive tracers. By incorporating the dynamics of fine ash particle-atmosphere interactions into existing VATD models provides the foundation for a much more accurate assessment framework applied to the hazard posed by specific future extreme eruptions, and thus dramatically reduce both the risk to air traffic and the cost of airport and flight closures, in addition to human health, water quality, agricultural, infrastructure hazards, as well as ice cap albedo and short term climate impacts.

Environmental impact and human health risks of polychlorinated dibenzo-p-dioxins and dibenzofurans in the vicinity of a new hazardous waste incinerator: a case study.

PubMed

Ferré-Huguet, Núria; Nadal, Martí; Schuhmacher, Marta; Domingo, José L

2006-01-01

The purpose of this study was to assess the environmental impact of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of a new hazardous waste incinerator (HWI) 4 years after regular operation of the facility. A double approach was carried out. The PCDD/F congener profiles corresponding to environmental samples, soil and herbage, collected before the HWI (baseline) and 4 years after starting regular operations, as well as PCDD/F profiles of air emission samples, were compared. The potential health risks (carcinogenic and noncarcinogenic) due to PCDD/F exposure were assessed for adults and children living in the neighborhood of the facility. Human exposure to PCDD/Fs was mainly due to dietary food intake. Comparisons between the PCDD/F congener profiles corresponding to the baseline and current surveys, as well as data concerning the human health risk assessment, indicate that the HWI in question does not cause additional risks to the environment orto the population living in the vicinity of the facility.

CONTAINMENT TECHNOLOGIES

EPA Science Inventory

Hazardous waste containment's primary objective is to isolate wastes deemed as hazardous from man and environmental systems of air, soil, and water. Hazardous wastes differ from other waste classifications due to their increased potential to cause human health effects or environ...

Additive manufacturing of microfluidic glass chips

NASA Astrophysics Data System (ADS)

Kotz, F.; Helmer, D.; Rapp, B. E.

2018-02-01

Additive manufacturing has gained great interest in the microfluidic community due to the numerous channel designs which can be tested in the early phases of a lab-on-a-chip device development. High resolution additive manufacturing like microstereolithography is largely associated with polymers. Polymers are at a disadvantage compared to other materials due to their softness and low chemical resistance. Whenever high chemical and thermal resistance combined with high optical transparency is needed, glasses become the material of choice. However, glasses are difficult to structure at the microscale requiring hazardous chemicals for etching processes. In this work we present additive manufacturing and high resolution patterning of microfluidic chips in transparent fused silica glass using stereolithography and microlithography. We print an amorphous silica nanocomposite at room temperature using benchtop stereolithography printers and a custom built microlithography system based on a digital mirror device. Using microlithography we printed structures with tens of micron resolution. The printed part is then converted to a transparent fused silica glass using thermal debinding and sintering. Printing of a microfluidic chip can be done within 30 minutes. The heat treatment can be done within two days.

A regularized variable selection procedure in additive hazards model with stratified case-cohort design.

PubMed

Ni, Ai; Cai, Jianwen

2018-07-01

Case-cohort designs are commonly used in large epidemiological studies to reduce the cost associated with covariate measurement. In many such studies the number of covariates is very large. An efficient variable selection method is needed for case-cohort studies where the covariates are only observed in a subset of the sample. Current literature on this topic has been focused on the proportional hazards model. However, in many studies the additive hazards model is preferred over the proportional hazards model either because the proportional hazards assumption is violated or the additive hazards model provides more relevent information to the research question. Motivated by one such study, the Atherosclerosis Risk in Communities (ARIC) study, we investigate the properties of a regularized variable selection procedure in stratified case-cohort design under an additive hazards model with a diverging number of parameters. We establish the consistency and asymptotic normality of the penalized estimator and prove its oracle property. Simulation studies are conducted to assess the finite sample performance of the proposed method with a modified cross-validation tuning parameter selection methods. We apply the variable selection procedure to the ARIC study to demonstrate its practical use.

78 FR 53190 - Pipeline Safety: Notice to Operators of Hazardous Liquid and Natural Gas Pipelines of a Recall on...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0185] Pipeline Safety: Notice to Operators of Hazardous Liquid and Natural Gas Pipelines of a Recall on Leak Repair Clamps Due to Defective Seal AGENCY: Pipeline and Hazardous Materials Safety...

Probabilistic volcanic hazard assessments of Pyroclastic Density Currents: ongoing practices and future perspectives

NASA Astrophysics Data System (ADS)

Tierz, Pablo; Sandri, Laura; Ramona Stefanescu, Elena; Patra, Abani; Marzocchi, Warner; Costa, Antonio; Sulpizio, Roberto

2014-05-01

Explosive volcanoes and, especially, Pyroclastic Density Currents (PDCs) pose an enormous threat to populations living in the surroundings of volcanic areas. Difficulties in the modeling of PDCs are related to (i) very complex and stochastic physical processes, intrinsic to their occurrence, and (ii) to a lack of knowledge about how these processes actually form and evolve. This means that there are deep uncertainties (namely, of aleatory nature due to point (i) above, and of epistemic nature due to point (ii) above) associated to the study and forecast of PDCs. Consequently, the assessment of their hazard is better described in terms of probabilistic approaches rather than by deterministic ones. What is actually done to assess probabilistic hazard from PDCs is to couple deterministic simulators with statistical techniques that can, eventually, supply probabilities and inform about the uncertainties involved. In this work, some examples of both PDC numerical simulators (Energy Cone and TITAN2D) and uncertainty quantification techniques (Monte Carlo sampling -MC-, Polynomial Chaos Quadrature -PCQ- and Bayesian Linear Emulation -BLE-) are presented, and their advantages, limitations and future potential are underlined. The key point in choosing a specific method leans on the balance between its related computational cost, the physical reliability of the simulator and the pursued target of the hazard analysis (type of PDCs considered, time-scale selected for the analysis, particular guidelines received from decision-making agencies, etc.). Although current numerical and statistical techniques have brought important advances in probabilistic volcanic hazard assessment from PDCs, some of them may be further applicable to more sophisticated simulators. In addition, forthcoming improvements could be focused on three main multidisciplinary directions: 1) Validate the simulators frequently used (through comparison with PDC deposits and other simulators), 2) Decrease simulator runtimes (whether by increasing the knowledge about the physical processes or by doing more efficient programming, parallelization, ...) and 3) Improve uncertainty quantification techniques.

Prognostic value of the post-training oxygen uptake efficiency slope in patients with coronary artery disease.

PubMed

Buys, Roselien; Coeckelberghs, Ellen; Cornelissen, Véronique A; Goetschalckx, Kaatje; Vanhees, Luc

2016-09-01

Peak oxygen uptake is an independent predictor of mortality in patients with coronary artery disease (CAD). However, patients with CAD are not always capable of reaching peak effort, and therefore submaximal gas exchange variables such as the oxygen uptake efficiency slope (OUES) have been introduced. Baseline exercise capacity as expressed by OUES provides prognostic information and this parameter responds to training. Therefore, we aimed to assess the prognostic value of post-training OUES in patients with CAD. We included 960 patients with CAD (age 60.6 ± 9.5 years; 853 males) who completed a cardiac rehabilitation program between 2000 and 2011. The OUES was calculated before and after cardiac rehabilitation and information on mortality was obtained. The relationships of post-training OUES with all-cause and cardiovascular (CV) mortality was assessed by Cox proportional hazards regression analyses. Receiver operator characteristic curve analysis was performed in order to obtain the optimal cut-off value. During 7.37 ± 3.20 years of follow-up (range: 0.45-13.75 years), 108 patients died, among whom 47 died due to CV reasons. The post-training OUES was related to all-cause (hazard ratio: 0.50, p < 0.001) and CV (hazard ratio: 0.40, p < 0.001) mortality. When significant covariates, including baseline OUES, were entered into the Cox regression analysis, post-training OUES remained related to all-cause and CV mortality (hazard ratio: 0.40, p < 0.01 and 0.26, p < 0.01, respectively). In addition, the change in OUES due to exercise training was positively related to mortality (hazard ratio: 0.49, p < 0.01). Post-training OUES has stronger prognostic value compared to baseline OUES. The lack of improvement in exercise capacity expressed by OUES after an exercise training program relates to a worse prognosis and can help distinguish patients with favorable and unfavorable prognoses. © The European Society of Cardiology 2016.

Influence of a Reclaimed Sand Addition to Moulding Sand with Furan Resin on Its Impact on the Environment.

PubMed

Holtzer, Mariusz; Dańko, Rafał; Kmita, Angelika

Metalcasting involves having a molten metal poured in a hollow mould to produce metal objects. These moulds are generally made of sand and are chemically bonded, clay-bonded, or even unbounded. There are many binder systems used. Binders based on furfuryl resins constitute currently the highest fraction in the binders no-bake group. Moulding sand, after knocking out the cast, is partially reclaimed, and the remaining part, known as waste foundry sand is used or stored outside the foundry. In this case, the environment hazardous organic compounds and metals can be leached from the moulding sand, thus causing pollution of water and soil. Also during the casting moulds with molten metal, they emit pyrolysis gases containing many different compounds, often dangerous from the BTEX and PAH group, which has adverse impacts on the environment and workers. The article presents the results of research on the impact of the regenerate addition to the moulding sand matrix on emitted gases and the degree of threat to the environment due to leaching of hazardous components. Therefore, for the total assessment of the moulding sands harmfulness, it is necessary to perform investigations concerning the dangerous substances elution into the environment during their management and storage, as well as investigations concerning emissions of hazardous substances (especially from the BTEX and PAHs group) during moulds pouring, cooling, and casting knocking out. Both kinds of investigations indicated that reclaimed sand additions to moulding sands have significantly negative influence on the environment and working conditions.

Occupational health hazards in veterinary medicine: Zoonoses and other biological hazards

PubMed Central

Epp, Tasha; Waldner, Cheryl

2012-01-01

This study describes biological hazards reported by veterinarians working in western Canada obtained through a self-administered mailed questionnaire. The potential occupational hazards included as biological hazards were zoonotic disease events, exposure to rabies, injuries due to bites and scratches, and allergies. Only 16.7% (136/812) of responding veterinarians reported the occurrence of a zoonosis or exposure to rabies in the past 5 years; the most commonly reported event was ringworm. Most bites and scratches (86%) described by 586 veterinarians involved encounters with cats; 81% of the resulting 163 infections were due to cat bites or scratches. Approximately 38% of participants reported developing an allergy during their career, with 41% of the affected individuals altering the way they practiced in response to their allergy. PMID:22851775

Flood hazard assessment for french NPPs

NASA Astrophysics Data System (ADS)

Rebour, Vincent; Duluc, Claire-Marie; Guimier, Laurent

2015-04-01

This paper presents the approach for flood hazard assessment for NPP which is on-going in France in the framework of post-Fukushima activities. These activities were initially defined considering both European "stress tests" of NPPs pursuant to the request of the European Council, and the French safety audit of civilian nuclear facilities in the light of the Fukushima Daiichi accident. The main actors in that process are the utility (EDF is, up to date, the unique NPP's operator in France), the regulatory authority (ASN) and its technical support organization (IRSN). This paper was prepared by IRSN, considering official positions of the other main actors in the current review process, it was not officially endorsed by them. In France, flood hazard to be considered for design basis definition (for new NPPs and for existing NPPs in periodic safety reviews conducted every 10 years) was revised before Fukushima-Daichi accident, due to le Blayais NPP December 1999 experience (partial site flooding and loss of some safety classified systems). The paper presents in the first part an overview of the revised guidance for design basis flood. In order to address design extension conditions (conditions that could result from natural events exceeding the design basis events), a set of flooding scenarios have been defined by adding margins on the scenarios that are considered for the design. Due to the diversity of phenomena to be considered for flooding hazard, the margin assessment is specific to each flooding scenario in terms of parameter to be penalized and of degree of variation of this parameter. The general approach to address design extension conditions is presented in the second part of the paper. The next parts present the approach for five flooding scenarios including design basis scenario and additional margin to define design extension scenarios.

BRAVEMIND: Advancing the Virtual Iraq/Afghanistan PTSD Exposure Therapy for MST

DTIC Science & Technology

2017-08-01

The 122nd Annual Convention of the American Psychological Association. Washington D.C. August 7, 2011.  Website(s) or other Internet site(s) o The...be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE...can produce additional risk for the development of PTSD in a population that is already at high risk due to the existing occupational hazards present

Health Hazard Evaluation Report HETA 84-046-1584, Hennepin County Medical Center, Minneapolis, Minnesota. [Ethylene oxide and waste anesthetic gases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniels, W.J.; Orris, P.

1985-04-01

Personal and area air samples were analyzed for ethylene oxide and waste anesthetic gases at Hennepin County Medical Center, Minneapolis, Minnesota in February, April, and July, 1984. The survey was requested by the center to evaluate health problems among employees. Medical questionnaires were administered and interviews were conducted with 59 employees in the instrument and operating room areas of the ear, nose, and throat, and surgery clinics. Ethylene-oxide was not detected during operation of the sterilizer. Nitrous-oxide concentrations of 66 to 138ppm were detected during surgical procedures. The authors conclude that a health hazard due to exposure to waste anestheticmore » gases exists at the center. Recommendations include evaluating the ventilation system and conducting additional monitoring for waste anesthetic gases.« less

Coastlines of the past: clues for our future

NASA Astrophysics Data System (ADS)

Reynolds, L.

2017-12-01

Coastlines are constantly evolving due to the long-term effects of sea-level change and human impacts, as well as in response to high-impact, short duration hazard events such as storms, tsunamis, and earthquakes. The sediments that accumulate in coastal systems such as estuaries, dunes, and beaches archieve the enviornmental record of the past, providing us a baseline with which to predict future coastal hazard magnitude and recurrence intervals. We study this record to understand future hazard potential, as well as to aid restoration efforts. Many coastal systems around the world have been degraded in the last few hundred years by human activity- these regions are important breeding grounds for commercially viable species, natural pollution filters, and barriers against inundation. Efforts to restore coastal systems often rely on data from historical sources to reconstruct past coastal conditions-the geological record can extend the timeframe with which we think about possible restoration points. In addition, studying past coastal response to enviornmental changes can aid the effort to restore systems to a point of sustainability and resilience instead of simply restoring to an arbirtary point in time.

Analysis of risk assessment factors of individuals in volcanic hazards: Review of the last decade

NASA Astrophysics Data System (ADS)

Favereau, Marcel; Robledo, Luis F.; Bull, Maria T.

2018-05-01

During the history of mankind, natural disasters have had severe repercussions on the different ecosystems, with volcanic eruptions being a clear example of this. This review is responsible for gathering the most important volatile hazards assessment research of the last decade with the objective of knowing the state of the art in relation to the studies of people's risk perception and acceptance in communities threatened by the danger of volcanic eruptions. In addition, this study includes the analysis of several cases across different countries. The results that this research offers serve as a frame of reference to determine and understand how resilient a community affected by the volatile hazards can be, since they are able to identify the main incident factors of risk that affect the communities to different degrees according to the context at the time of making the risk judgment. On the other hand, through this review, it is proposed as a future research topic to understand the levels of risk acceptance of individuals, due to the fact that the studies related to this subject are scarce.

Loss Estimations due to Earthquakes and Secondary Technological Hazards

NASA Astrophysics Data System (ADS)

Frolova, N.; Larionov, V.; Bonnin, J.

2009-04-01

Expected loss and damage assessment due to natural and technological disasters are of primary importance for emergency management just after the disaster, as well as for development and implementation of preventive measures plans. The paper addresses the procedures and simulation models for loss estimations due to strong earthquakes and secondary technological accidents. The mathematical models for shaking intensity distribution, damage to buildings and structures, debris volume, number of fatalities and injuries due to earthquakes and technological accidents at fire and chemical hazardous facilities are considered, which are used in geographical information systems assigned for these purposes. The criteria of technological accidents occurrence are developed on the basis of engineering analysis of past events' consequences. The paper is providing the results of scenario earthquakes consequences estimation and individual seismic risk assessment taking into account the secondary technological hazards at regional and urban levels. The individual risk is understood as the probability of death (or injuries) due to possible hazardous event within one year in a given territory. It is determined through mathematical expectation of social losses taking into account the number of inhabitants in the considered settlement and probability of natural and/or technological disaster.

78 FR 8699 - Pipeline Safety: Information Collection Activities, Revision to Annual Report for Hazardous...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

... returning it to you via the U.S. mail. Please note that due to delays in the delivery of U.S. mail to... hazardous liquid pipeline industry. B. Proposed Changes to the Annual Report for Hazardous Liquid Pipeline... of the regulated hazardous liquid pipeline industry already collects this information on a by- state...

Optimal Scaling of Aftershock Zones using Ground Motion Forecasts

NASA Astrophysics Data System (ADS)

Wilson, John Max; Yoder, Mark R.; Rundle, John B.

2018-02-01

The spatial distribution of aftershocks following major earthquakes has received significant attention due to the shaking hazard these events pose for structures and populations in the affected region. Forecasting the spatial distribution of aftershock events is an important part of the estimation of future seismic hazard. A simple spatial shape for the zone of activity has often been assumed in the form of an ellipse having semimajor axis to semiminor axis ratio of 2.0. However, since an important application of these calculations is the estimation of ground shaking hazard, an effective criterion for forecasting future aftershock impacts is to use ground motion prediction equations (GMPEs) in addition to the more usual approach of using epicentral or hypocentral locations. Based on these ideas, we present an aftershock model that uses self-similarity and scaling relations to constrain parameters as an option for such hazard assessment. We fit the spatial aspect ratio to previous earthquake sequences in the studied regions, and demonstrate the effect of the fitting on the likelihood of post-disaster ground motion forecasts for eighteen recent large earthquakes. We find that the forecasts in most geographic regions studied benefit from this optimization technique, while some are better suited to the use of the a priori aspect ratio.

A comprehensive Probabilistic Tsunami Hazard Assessment for the city of Naples (Italy)

NASA Astrophysics Data System (ADS)

Anita, G.; Tonini, R.; Selva, J.; Sandri, L.; Pierdominici, S.; Faenza, L.; Zaccarelli, L.

2012-12-01

A comprehensive Probabilistic Tsunami Hazard Assessment (PTHA) should consider different tsunamigenic sources (seismic events, slide failures, volcanic eruptions) to calculate the hazard on given target sites. This implies a multi-disciplinary analysis of all natural tsunamigenic sources, in a multi-hazard/risk framework, which considers also the effects of interaction/cascade events. Our approach shows the ongoing effort to analyze the comprehensive PTHA for the city of Naples (Italy) including all types of sources located in the Tyrrhenian Sea, as developed within the Italian project ByMuR (Bayesian Multi-Risk Assessment). The project combines a multi-hazard/risk approach to treat the interactions among different hazards, and a Bayesian approach to handle the uncertainties. The natural potential tsunamigenic sources analyzed are: 1) submarine seismic sources located on active faults in the Tyrrhenian Sea and close to the Southern Italian shore line (also we consider the effects of the inshore seismic sources and the associated active faults which we provide their rapture properties), 2) mass failures and collapses around the target area (spatially identified on the basis of their propensity to failure), and 3) volcanic sources mainly identified by pyroclastic flows and collapses from the volcanoes in the Neapolitan area (Vesuvius, Campi Flegrei and Ischia). All these natural sources are here preliminary analyzed and combined, in order to provide a complete picture of a PTHA for the city of Naples. In addition, the treatment of interaction/cascade effects is formally discussed in the case of significant temporary variations in the short-term PTHA due to an earthquake.

Integrating Hazardous Materials Characterization and Assessment Tools to Guide Pollution Prevention in Electronic Products and Manufacturing

NASA Astrophysics Data System (ADS)

Lam, Carl

Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative recommendations are provided and substitute materials such as aluminum alloys for stainless steel and high-density polyethylene for polyvinyl chloride and acrylonitrile-based polymers show promise to meet toxicity reduction, cost, and material functionality requirements. Furthermore, the TPI method, an European Union focused screening tool, is customized to reflect regulated U.S. toxicity parameters. Results show that, although it is possible to adopt U.S. parameters into the TPI method, harmonization of toxicity regulation and standards in various nations and regions is necessary to eliminate inconsistencies during hazard screening of substances used globally. As a whole, the present work helps to assimilate material hazard assessment methods into the larger framework of design for environment strategies so toxics use reduction could be achieved for the development and management of electronics and other consumer goods.

Impact of disability status on suicide risks in South Korea: Analysis of National Health Insurance cohort data from 2003 to 2013.

PubMed

Lee, Sang-Uk; Roh, Sungwon; Kim, Young-Eun; Park, Jong-Ik; Jeon, Boyoung; Oh, In-Hwan

2017-01-01

The elevated risk of suicide in people with disability has been suggested in the previous studies; however, the majority of study results have been limited to specific disability types, and there is a lack of research comparing the risk of suicide in people with disability in general. To examine the hazard ratio of suicide according to the presence and the types of disability and identify patterns in the results. In this study, we used National Health Insurance Service-National Sample Cohort data on 990,598 people, and performed analysis on the cause of death from 2003 through 2013. A Cox proportional hazard model was used to estimate the hazard ratio of suicide associated with disability and its types. The hazard ratio of suicide among people with disability was 1.9-folds higher compared to people without disability. The risk of suicide among different disability types was higher in mental disorder, renal failure, brain injury and physical disability. The hazard ratio of suicide in people with disability was not varied by income. The time to death by suicide for people with disability from the onset of their disability was 39.8 months on average. Our findings suggest that when the government plans suicide prevention policies, early and additional interventions specific to people with disability are needed. Disability due to mental disorder, renal failure should be given priority. Copyright © 2016 Elsevier Inc. All rights reserved.

78 FR 45938 - Final Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

...] Final Flood Hazard Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Final notice. SUMMARY: Flood hazard determinations, which may include additions or modifications of Base Flood Elevations (BFEs), base flood depths, Special Flood Hazard Area (SFHA) boundaries or zone designations, or...

Landslide hazard assessment of the Black sea coastline (Caucasus, Russia) via drones

NASA Astrophysics Data System (ADS)

Kazeev, Andrey; Postoev, German; Fedotova, Ksenia

2017-04-01

Landslide hazard assessment of slopes of Sochi was performed along the railway between the cities Tuapse and Adler (total length 103 km). The railway passes through the territory with active development of hazardous geological processes such as landslides, rock falls and debris-flows. By the beginning of 2016, 36 landslide sites were discovered along the railway (total length 34 km), 48 rock-fall sites (length 31 km), and 5 debris-flow sites (length 0.14 km). In recent years the intensification of deformations was observed. For instance, during previous 10 years (1996¬¬-2005) 28 sudden deformations occurred due to slope processes, which caused interruptions in traffic. And in the present decade (2006-2015), 72 deformations were recorded. High landslide activity and economic loss determined the necessity of complex investigations of engineering geological conditions of landslides development and causes of its intensification. The protection strategy development was needed to minimize negative consequences. Thus, the investigations of landslide situation along the railway "Tuapse - Adler" included the categorization of landslide sites by level of hazard, with risk assessment based on numerical criteria. Preliminary evaluation of landslide hazard for the railway was conducted via the analysis of archived engineering-geological documents. 13 of 36 landslide sites (total length 13 km) were selected, reflecting the variety and peculiarities of landslide displacements on slopes (both active and inactive sites). Visual field observations of landslide slopes using drone "DJI Phantom 4" were completed during the second stage of this investigation. High-resolution photographs of landslide cirques, cracks, scarp walls, vegetation features were obtained via drone, which would have been impossible to obtain from the ground in conditions of dense subtropical vegetation cover. Possible approaches to the landslide activity and hazard assessment were evaluated: slope stability analysis, geophysical monitoring methods, analysis of critical deformations and critical velocities of displacement, the analysis of changes of conditions of landslide development during its displacement, as well as scoring approaches to landslide hazard and risk assessment. As the result, the method of probabilistic estimation of landslide activity and hazard has been proposed, based on selection and analysis of main factors, influencing landslide displacements. Slope steepness, landslide thickness, slope length, bedrock dip, slope relief, cracks, vegetation patterns and other factors were used for assessment of activity of landslide sites. The investigation was based on the proposed probabilistic method of assessment of landslide activity and hazard. The considered landslide sites were ranked by the rate of activity as inactive, potentially active and active. The most active sites were used to identify potentially the most hazardous sites. Furthermore, the following factors were additionally considered: the damage of railroad facilities due to landslide, landslide activity, thickness of landslide at the toe of the slope, bedrock stratification, the conditions for the cirque development, the position of the sliding surface relatively to the railway, the involvement of bedrock into displaced mass. As the result, the investigated railroad sites were divided into three categories: non-hazardous, potentially hazardous and hazardous. The research was supported by Russian Scientific Foundation (Project № 16-17-00125).

Probabilistic and Scenario Seismic and Liquefaction Hazard Analysis of the Mississippi Embayment Incorporating Nonlinear Site Effects

NASA Astrophysics Data System (ADS)

Cramer, C. H.; Dhar, M. S.

2017-12-01

The influence of deep sediment deposits of the Mississippi Embayment (ME) on the propagation of seismic waves is poorly understood and remains a major source of uncertainty for site response analysis. Many researchers have studied the effects of these deposits on seismic hazard of the area using available information at the time. In this study, we have used updated and newly available resources for seismic and liquefaction hazard analyses of the ME. We have developed an improved 3D geological model. Additionally, we used surface geological maps from Cupples and Van Arsdale (2013) to prepare liquefaction hazard maps. Both equivalent linear and nonlinear site response codes were used to develop site amplification distributions for use in generating hazard maps. The site amplification distributions are created using the Monte Carlo approach of Cramer et al. (2004, 2006) on a 0.1-degree grid. The 2014 National Seismic Hazard model and attenuation relations (Petersen et al., 2014) are used to prepare seismic hazard maps. Then liquefaction hazard maps are generated using liquefaction probability curves from Holzer (2011) and Cramer et al. (2015). Equivalent linear response (w/ increased precision, restricted nonlinear behavior with depth) shows similar hazard for the ME compared to nonlinear analysis (w/o pore pressure) results. At short periods nonlinear deamplification dominates the hazard, but at long periods resonance amplification dominates. The liquefaction hazard tends to be high in Holocene and late Pleistocene lowland sediments, even with lowered ground water levels, and low in Pleistocene loess of the uplands. Considering pore pressure effects in nonlinear site response analysis at a test site on the lowlands shows amplification of ground motion at short periods. PGA estimates from ME liquefaction and MMI observations are in the 0.25 to 0.4 g range. Our estimated M7.5 PGA hazard within 10 km of the fault can exceed this. Ground motion observations from liquefaction sites in New Zealand and Japan support PGAs below 0.4 g, except at sites within 20 km exhibiting pore-pressure induced acceleration spikes due to cyclic mobility where PGA ranges from 0.5 to 1.5 g. This study is being extended to more detailed seismic and liquefaction hazard studies in five western Tennessee counties under a five year grant from HUD.

Multi-factor evaluation indicator method for the risk assessment of atmospheric and oceanic hazard group due to the attack of tropical cyclones

NASA Astrophysics Data System (ADS)

Qi, Peng; Du, Mei

2018-06-01

China's southeast coastal areas frequently suffer from storm surge due to the attack of tropical cyclones (TCs) every year. Hazards induced by TCs are complex, such as strong wind, huge waves, storm surge, heavy rain, floods, and so on. The atmospheric and oceanic hazards cause serious disasters and substantial economic losses. This paper, from the perspective of hazard group, sets up a multi-factor evaluation method for the risk assessment of TC hazards using historical extreme data of concerned atmospheric and oceanic elements. Based on the natural hazard dynamic process, the multi-factor indicator system is composed of nine natural hazard factors representing intensity and frequency, respectively. Contributing to the indicator system, in order of importance, are maximum wind speed by TCs, attack frequency of TCs, maximum surge height, maximum wave height, frequency of gusts ≥ Scale 8, rainstorm intensity, maximum tidal range, rainstorm frequency, then sea-level rising rate. The first four factors are the most important, whose weights exceed 10% in the indicator system. With normalization processing, all the single-hazard factors are superposed by multiplying their weights to generate a superposed TC hazard. The multi-factor evaluation indicator method was applied to the risk assessment of typhoon-induced atmospheric and oceanic hazard group in typhoon-prone southeast coastal cities of China.

DECONTAMINATION OF HAZARDOUS WASTE SUBSTANCES FROM SPILLS AND UNCONTROLLED WASTE SITES BY RADIO FREQUENCY IN SITU HEATING

EPA Science Inventory

The radio frequency (RF) heating process can be used to volumetrically heat and thus decontaminate uncontrolled landfills and hazardous substances from spills. After the landfills are heated, decontamination of the hazardous substances occurs due to thermal decomposition, vaporiz...

Engineered Nanomaterials, Sexy New Technology and Potential Hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R A

Engineered nanomaterials enhance exciting new applications that can greatly benefit society in areas of cancer treatments, solar energy, energy storage, and water purification. While nanotechnology shows incredible promise in these and other areas by exploiting nanomaterials unique properties, these same properties can potentially cause adverse health effects to workers who may be exposed during work. Dispersed nanoparticles in air can cause adverse health effects to animals not merely due to their chemical properties but due to their size, structure, shape, surface chemistry, solubility, carcinogenicity, reproductive toxicity, mutagenicity, dermal toxicity, and parent material toxicity. Nanoparticles have a greater likelihood of lungmore » deposition and blood absorption than larger particles due to their size. Nanomaterials can also pose physical hazards due to their unusually high reactivity, which makes them useful as catalysts, but has the potential to cause fires and explosions. Characterization of the hazards (and potential for exposures) associated with nanomaterial development and incorporation in other products is an essential step in the development of nanotechnologies. Developing controls for these hazards are equally important. Engineered controls should be integrated into nanomaterial manufacturing process design according to 10CFR851, DOE Policy 456.1, and DOE Notice 456.1 as safety-related hardware or administrative controls for worker safety. Nanomaterial hazards in a nuclear facility must also meet control requirements per DOE standards 3009, 1189, and 1186. Integration of safe designs into manufacturing processes for new applications concurrent with the developing technology is essential for worker safety. This paper presents a discussion of nanotechnology, nanomaterial properties/hazards and controls.« less

Modeling and Hazard Analysis Using STPA

NASA Astrophysics Data System (ADS)

Ishimatsu, Takuto; Leveson, Nancy; Thomas, John; Katahira, Masa; Miyamoto, Yuko; Nakao, Haruka

2010-09-01

A joint research project between MIT and JAXA/JAMSS is investigating the application of a new hazard analysis to the system and software in the HTV. Traditional hazard analysis focuses on component failures but software does not fail in this way. Software most often contributes to accidents by commanding the spacecraft into an unsafe state(e.g., turning off the descent engines prematurely) or by not issuing required commands. That makes the standard hazard analysis techniques of limited usefulness on software-intensive systems, which describes most spacecraft built today. STPA is a new hazard analysis technique based on systems theory rather than reliability theory. It treats safety as a control problem rather than a failure problem. The goal of STPA, which is to create a set of scenarios that can lead to a hazard, is the same as FTA but STPA includes a broader set of potential scenarios including those in which no failures occur but the problems arise due to unsafe and unintended interactions among the system components. STPA also provides more guidance to the analysts that traditional fault tree analysis. Functional control diagrams are used to guide the analysis. In addition, JAXA uses a model-based system engineering development environment(created originally by Leveson and called SpecTRM) which also assists in the hazard analysis. One of the advantages of STPA is that it can be applied early in the system engineering and development process in a safety-driven design process where hazard analysis drives the design decisions rather than waiting until reviews identify problems that are then costly or difficult to fix. It can also be applied in an after-the-fact analysis and hazard assessment, which is what we did in this case study. This paper describes the experimental application of STPA to the JAXA HTV in order to determine the feasibility and usefulness of the new hazard analysis technique. Because the HTV was originally developed using fault tree analysis and following the NASA standards for safety-critical systems, the results of our experimental application of STPA can be compared with these more traditional safety engineering approaches in terms of the problems identified and the resources required to use it.

Use of Citizen Science and Social Media to Improve Wind Hazard and Damage Characterization

NASA Astrophysics Data System (ADS)

Lombardo, F.; Meidani, H.

2017-12-01

Windstorm losses are significant in the U.S. annually and cause damage worldwide. A large percentage of losses are caused by localized events (e.g., tornadoes). In order to better mitigate these losses improvement is needed in understanding the hazard characteristics and physical damage. However, due to the small-scale nature of these events the resolution of the dedicated measuring network does not capture most occurrences. As a result damage-based assessments are sometimes used to gauge intensity. These damage assessments often suffer from a lack of available manpower, inability to arrive at the scene rapidly and difficulty accessing a damaged site. The use and rapid dissemination of social media, the power of crowds engaged in scientific endeavors, and the public's awareness of their vulnerabilities point to a paradigm shift in how hazards can be sensed in a rapid manner. In this way, `human-sensor' data has the potential to radically improve fundamental understanding of hazard and disasters and resolve some of the existing challenges in wind hazard and damage characterization. Data from social media outlets such as Twitter have been used to aid in damage assessments from hazards such as flood and earthquake, however, the reliability and uncertainty of participatory sensing has been questioned and has been called the `biggest challenge' for its sustained use. This research proposes to investigate the efficacy of both citizen science applications and social media data to represent wind hazards and associated damage. Research has focused on a two-phase approach: 1) to have citizen scientists perform their own `damage survey' (i.e., questionnaire) with known damage to assess uncertainty in estimation and 2) downloading and analysis of social media text and imagery streams to ascertain the possibility of performing `unstructured damage surveys'. Early results have shown that the untrained public can estimate tornado damage levels in residential structures with some accuracy. In addition, valuable windstorm hazard and damage information in both text and imagery can be extracted and archived from Twitter in an automated fashion. Information extracted from these sources will feed into advances in hazard and disaster modeling, social-cognitive theories of human behavior and decision-making for hazard mitigation.

Hazard Characterization of Modified Vaccinia Virus Ankara Vector: What Are the Knowledge Gaps?

PubMed Central

Okeke, Malachy I.; Okoli, Arinze S.; Offor, Collins; Oludotun, Taiwo G.; Tryland, Morten; Bøhn, Thomas; Moens, Ugo

2017-01-01

Modified vaccinia virus Ankara (MVA) is the vector of choice for human and veterinary applications due to its strong safety profile and immunogenicity in vivo. The use of MVA and MVA-vectored vaccines against human and animal diseases must comply with regulatory requirements as they pertain to environmental risk assessment, particularly the characterization of potential adverse effects to humans, animals and the environment. MVA and recombinant MVA are widely believed to pose low or negligible risk to ecosystem health. However, key aspects of MVA biology require further research in order to provide data needed to evaluate the potential risks that may occur due to the use of MVA and MVA-vectored vaccines. The purpose of this paper is to identify knowledge gaps in the biology of MVA and recombinant MVA that are of relevance to its hazard characterization and discuss ongoing and future experiments aimed at providing data necessary to fill in the knowledge gaps. In addition, we presented arguments for the inclusion of uncertainty analysis and experimental investigation of verifiable worst-case scenarios in the environmental risk assessment of MVA and recombinant MVA. These will contribute to improved risk assessment of MVA and recombinant MVA vaccines. PMID:29109380

Hazard Characterization of Modified Vaccinia Virus Ankara Vector: What Are the Knowledge Gaps?

PubMed

Okeke, Malachy I; Okoli, Arinze S; Diaz, Diana; Offor, Collins; Oludotun, Taiwo G; Tryland, Morten; Bøhn, Thomas; Moens, Ugo

2017-10-29

Modified vaccinia virus Ankara (MVA) is the vector of choice for human and veterinary applications due to its strong safety profile and immunogenicity in vivo. The use of MVA and MVA-vectored vaccines against human and animal diseases must comply with regulatory requirements as they pertain to environmental risk assessment, particularly the characterization of potential adverse effects to humans, animals and the environment. MVA and recombinant MVA are widely believed to pose low or negligible risk to ecosystem health. However, key aspects of MVA biology require further research in order to provide data needed to evaluate the potential risks that may occur due to the use of MVA and MVA-vectored vaccines. The purpose of this paper is to identify knowledge gaps in the biology of MVA and recombinant MVA that are of relevance to its hazard characterization and discuss ongoing and future experiments aimed at providing data necessary to fill in the knowledge gaps. In addition, we presented arguments for the inclusion of uncertainty analysis and experimental investigation of verifiable worst-case scenarios in the environmental risk assessment of MVA and recombinant MVA. These will contribute to improved risk assessment of MVA and recombinant MVA vaccines.

Growth of Staphylococcus and Salmonella on Frankfurters With and Without Sodium Nitrite

PubMed Central

Bayne, Henry G.; Michener, H. David

1975-01-01

Conventional and nitrite-free frankfurters in loosely wrapped packages were compared as to their ability to support growth of Salmonella, Staphylococcus, and their naturally occurring spoilage flora at 7 C (simulating refrigerated storage) and 20 C (simulating possible temperature abuse). At 7 C Salmonella did not grow in either type of frankfurter; Staphylococcus and the natural spoilage flora sometimes grew more rapidly in the absence of nitrite, but the difference was not significant. At 20 C growth of Salmonella, Staphylococcus, and of the spoilage flora was, at most, only slightly faster on nitrite-free frankfurters. Salmonella was not suppressed in broth culture experiments at the pH and nitrite content found in frankfurters. Although either type of frankfurter can become hazardous due to growth of Salmonella or Staphylococcus, no unusual or additional hazard resulted from the omission of nitrite from frankfurters. PMID:952

Screening Li-Ion Batteries for Internal Shorts

NASA Technical Reports Server (NTRS)

Darcy, Eric

2006-01-01

The extremely high cost of aerospace battery failures due to internal shorts makes it essential that their occurrence be very rare, if not eliminated altogether. With Li-ion cells/batteries, the potentially catastrophic safety hazard that some internal shorts present adds additional incentive for prevention. Prevention can be achieved by design, manufacturing measures, and testing. Specifically for NASA s spacesuit application, a Li-ion polymer pouch cell battery design is in its final stages of production. One of the 20 flight batteries fabricated and tested developed a cell internal short, which did not present a safety hazard, but has required revisiting the entire manufacturing and testing process. Herein are the details of the failure investigation that followed to get to root cause of the internal short and the corrective actions that will be taken. The resulting lessons learned are applicable to most Li-ion battery applications.

Recent Developments of the Florida Public Hurricane Loss Model

NASA Astrophysics Data System (ADS)

Cocke, S.; Shin, D. W.; Annane, B.

2016-12-01

Catastrophe models are used extensively by the insurance industry to estimate losses due to natural hazards such as hurricanes and earthquakes. In the state of Florida, primary insurers for hurricane damage to residential properties are required by law to use certified catastrophe models to establish their premiums and capital reserves. The Florida Public Hurricane Loss Model (FPHLM) is one of only five certified catastrophe models in Florida, and the only non-commercial model certified. The FPHLM has been funded through the Florida Legislature and is overseen by the Florida Office of Insurance Regulation (OIR). The model was developed by a consortium of universities and private consultants primary located in Florida, but includes some partners outside of the state. The FPHLM has met Florida requirements since 2006 and has undergone continuous evolution to maintain state-of-the-art capabilities and changes in state requirements established by the Florida Commission on Hurricane Loss Projection Methodology. Recently the model has been undergoing major enhancement to incorporate damage due to flooding, which not only includes hurricane floods but floods due to all potential natural hazards. This work is being done in anticipation of future changes in the National Flood Insurance Program (NFIP) that will bring private insurers to the flood market. The model will incorporate a surge model as well as an inland flood model. We will present progress on these recent enhancements along with additional progress of the model.

Buildings vs. ballistics: Quantifying the vulnerability of buildings to volcanic ballistic impacts using field studies and pneumatic cannon experiments

NASA Astrophysics Data System (ADS)

Williams, G. T.; Kennedy, B. M.; Wilson, T. M.; Fitzgerald, R. H.; Tsunematsu, K.; Teissier, A.

2017-09-01

Recent casualties in volcanic eruptions due to trauma from blocks and bombs necessitate more rigorous, ballistic specific risk assessment. Quantitative assessments are limited by a lack of experimental and field data on the vulnerability of buildings to ballistic hazards. An improved, quantitative understanding of building vulnerability to ballistic impacts is required for informing appropriate life safety actions and other risk reduction strategies. We assessed ballistic impacts to buildings from eruptions at Usu Volcano and Mt. Ontake in Japan and compiled available impact data from eruptions elsewhere to identify common damage patterns from ballistic impacts to buildings. We additionally completed a series of cannon experiments which simulate ballistic block impacts to building claddings to investigate their performance over a range of ballistic projectile velocities, masses and energies. Our experiments provide new insights by quantifying (1) the hazard associated with post-impact shrapnel from building and rock fragments; (2) the effect of impact obliquity on damage; and (3) the additional impact resistance buildings possess when claddings are struck in areas directly supported by framing components. This was not well identified in previous work which may have underestimated building vulnerability to ballistic hazards. To improve assessment of building vulnerability to ballistics, we use our experimental and field data to develop quantitative vulnerability models known as fragility functions. Our fragility functions and field studies show that although unreinforced buildings are highly vulnerable to large ballistics (> 20 cm diameter), they can still provide shelter, preventing death during eruptions.

Augmenting the Deliberative Method for Ranking Risks.

PubMed

Susel, Irving; Lasley, Trace; Montezemolo, Mark; Piper, Joel

2016-01-01

The Department of Homeland Security (DHS) characterized and prioritized the physical cross-border threats and hazards to the nation stemming from terrorism, market-driven illicit flows of people and goods (illegal immigration, narcotics, funds, counterfeits, and weaponry), and other nonmarket concerns (movement of diseases, pests, and invasive species). These threats and hazards pose a wide diversity of consequences with very different combinations of magnitudes and likelihoods, making it very challenging to prioritize them. This article presents the approach that was used at DHS to arrive at a consensus regarding the threats and hazards that stand out from the rest based on the overall risk they pose. Due to time constraints for the decision analysis, it was not feasible to apply multiattribute methodologies like multiattribute utility theory or the analytic hierarchy process. Using a holistic approach was considered, such as the deliberative method for ranking risks first published in this journal. However, an ordinal ranking alone does not indicate relative or absolute magnitude differences among the risks. Therefore, the use of the deliberative method for ranking risks is not sufficient for deciding whether there is a material difference between the top-ranked and bottom-ranked risks, let alone deciding what the stand-out risks are. To address this limitation of ordinal rankings, the deliberative method for ranking risks was augmented by adding an additional step to transform the ordinal ranking into a ratio scale ranking. This additional step enabled the selection of stand-out risks to help prioritize further analysis. © 2015 Society for Risk Analysis.

[Application of SAS macro to evaluated multiplicative and additive interaction in logistic and Cox regression in clinical practices].

PubMed

Nie, Z Q; Ou, Y Q; Zhuang, J; Qu, Y J; Mai, J Z; Chen, J M; Liu, X Q

2016-05-01

Conditional logistic regression analysis and unconditional logistic regression analysis are commonly used in case control study, but Cox proportional hazard model is often used in survival data analysis. Most literature only refer to main effect model, however, generalized linear model differs from general linear model, and the interaction was composed of multiplicative interaction and additive interaction. The former is only statistical significant, but the latter has biological significance. In this paper, macros was written by using SAS 9.4 and the contrast ratio, attributable proportion due to interaction and synergy index were calculated while calculating the items of logistic and Cox regression interactions, and the confidence intervals of Wald, delta and profile likelihood were used to evaluate additive interaction for the reference in big data analysis in clinical epidemiology and in analysis of genetic multiplicative and additive interactions.

Combat Ration Advanced Manufacturing Technology Demonstration (CRAMTD). ’Generic Inspection-Statistical Process Control System for a Combat Ration Manufacturing Facility’. Short Term Project (STP) Number 3.

DTIC Science & Technology

1996-01-01

failure as due to an adhesive layer between the foil and inner polypropylene layers. "* Under subcontract, NFPA provided HACCP draft manuals for the...parameters of the production process and to ensure that they are within their target values. In addition, a HACCP program was used to assure product...played an important part in implementing Hazard Analysis Critical Control Points ( HACCP ) as part of the Process and Quality Control manual. The National

Hydrothermal Liquefaction Treatment Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Peter P.; Wagner, Katie A.

Hazard analyses were performed to evaluate the modular hydrothermal liquefaction treatment system. The hazard assessment process was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. The analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public. The following selected hazardous scenarios receivedmore » increased attention: •Scenarios involving a release of hazardous material or energy, controls were identified in the What-If analysis table that prevent the occurrence or mitigate the effects of the release. •Scenarios with significant consequences that could impact personnel outside the immediate operations area, quantitative analyses were performed to determine the potential magnitude of the scenario. The set of “critical controls” were identified for these scenarios (see Section 4) which prevent the occurrence or mitigate the effects of the release of events with significant consequences.« less

Handling of hazardous drugs - Effect of an innovative teaching session for nursing students.

PubMed

Zimmer, Janine; Hartl, Stefanie; Standfuß, Katrin; Möhn, Till; Bertsche, Astrid; Frontini, Roberto; Neininger, Martina P; Bertsche, Thilo

2017-02-01

Imparting knowledge and practical skills in hazardous drug handling in nursing students' education is essential to prevent hazardous exposure and to preserve nurses' health. This study aimed at comparing routine nursing education with an additional innovative teaching session. A prospective controlled study in nursing students was conducted in two study periods: (i) a status-quo period (routine education on handling hazardous drugs) followed by (ii) an intervention period (additional innovative teaching session on handling hazardous drugs). Nursing students at a vocational school were invited to participate voluntarily. In both study periods (i) and (ii), the following factors were analysed: (a) knowledge of hazardous drug handling by questionnaire, (b) practical skills in hazardous drug handling (e.g. cleaning) by a simulated handling scenario, (c) contamination with drug residuals on the work surface by fluorescent imaging. Fifty-three nursing students were enrolled. (a) Median knowledge improved from status-quo (39% right answers) to intervention (65%, p<0.001), (b) practical skills improved from status-quo (53% of all participants cleaned the work surface) to intervention (92%, p<0.001). (c) Median number of particles/m 2 decreased from status-quo to intervention (932/97, p<0.001). Compared with routine education, knowledge and practical skills in hazardous drug handling were significantly improved after an innovative teaching session. Additionally, the amount of residuals on the work surface decreased. This indicates a lower risk for hazardous drug exposure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Simulation of a Doppler lidar system for autonomous navigation and hazard avoidance during planetary landing

NASA Astrophysics Data System (ADS)

Budge, Scott E.; Chester, David B.

2016-05-01

The latest mission proposals for exploration of solar system bodies require accurate position and velocity data during the descent phase in order to ensure safe, soft landing at the pre-designated sites. During landing maneuvers, the accuracy of the on-board inertial measurement unit (IMU) may not be reliable due to drift over extended travel times to destinations. NASA has proposed an advanced Doppler lidar system with multiple beams that can be used to accurately determine attitude and position of the landing vehicle during descent, and to detect hazards that might exist in the landing area. In order to assess the effectiveness of such a Doppler lidar landing system, it is valuable to simulate the system with different beam numbers and configurations. In addition, the effectiveness of the system to detect and map potential landing hazards must be understood. This paper reports the simulated system performance for a proposed multi-beam Doppler lidar using the LadarSIM system simulation software. Details of the simulation methods are given, as well as lidar performance parameters such as range and velocity accuracy, detection and false alarm rates, and examples of the Doppler lidars ability to detect and characterize simulated hazards in the landing site. The simulation includes modulated pulse generation and coherent detection methods, beam footprint simulation, beam scanning, and interaction with terrain.

Approaches to systematic assessment of environmental exposures posed at hazardous waste sites in the developing world: the Toxic Sites Identification Program.

PubMed

Ericson, Bret; Caravanos, Jack; Chatham-Stephens, Kevin; Landrigan, Philip; Fuller, Richard

2013-02-01

In the developing world, environmental chemical exposures due to hazardous waste sites are poorly documented. We describe the approach taken by the Blacksmith Institute's Toxic Sites Identification Program in documenting environmental chemical exposures due to hazardous waste sites globally, identifying sites of concern and quantifying pathways, populations, and severity of exposure. A network of local environmental investigators was identified and trained to conduct hazardous waste site investigations and assessments. To date, 2,095 contaminated sites have been identified within 47 countries having an estimated population at risk of 71,500,000. Trained researchers and investigators have visited 1,400 of those sites. Heavy metals are the leading primary exposures, with water supply and ambient air being the primary routes of exposure. Even though chemical production has occurred largely in the developed world to date, many hazardous waste sites in the developing world pose significant hazards to the health of large portions of the population. Further research is needed to quantify potential health and economic consequences and identify cost-effective approaches to remediation.

Integrating multidisciplinary science, modelling and impact data into evolving, syn-event volcanic hazard mapping and communication: A case study from the 2012 Tongariro eruption crisis, New Zealand

NASA Astrophysics Data System (ADS)

Leonard, Graham S.; Stewart, Carol; Wilson, Thomas M.; Procter, Jonathan N.; Scott, Bradley J.; Keys, Harry J.; Jolly, Gill E.; Wardman, Johnny B.; Cronin, Shane J.; McBride, Sara K.

2014-10-01

New Zealand's Tongariro National Park volcanoes produce hazardous eruptions every few years to decades. On 6 August 2012 the Te Maari vent of Tongariro Volcano erupted, producing a series of explosions and a fine ash of minor volume which was dispersed rapidly to the east. This manuscript presents a summary of the eruption impacts and the way these supported science communication during the crisis, particularly in terms of hazard map development. The most significant proximal impact was damage from pyroclastic surges and ballistics to the popular and economically-important Tongariro Alpine Crossing track. The only hazard to affect the medial impact zone was a few mms of ashfall with minor impacts. Field testing indicated that the Te Maari ash had extremely low resistivity when wetted, implying a very high potential to cause disruption to nationally-important power transmission networks via the mechanism of insulator flashover. This was not observed, presumably due to insufficient ash accumulation on insulators. Virtually no impacts from distal ashfall were reported. Post-event analysis of PM10 data demonstrates the additional value of regional air quality monitoring networks in quantifying population exposure to airborne respirable ash. While the eruption was minor, it generated a high level of public interest and a demand for information on volcanic hazards and impacts from emergency managers, the public, critical infrastructure managers, health officials, and the agriculture sector. Meeting this demand fully taxed available resources. We present here aspects of the New Zealand experience which may have wider applicability in moving towards improved integration of hazard impact information, mapping, and communication. These include wide use of a wiki technical clearinghouse and email listservs, a focus on multi-agency consistent messages, and a recently developed environment of collaboration and alignment of both research funding and technical science advice. Hazard maps were integral to science communication during the crisis, but there is limited international best practice information available on hazard maps as communication devices, as most volcanic hazard mapping literature is concerned with defining hazard zones. We propose that hazard maps are only as good as the communications framework and inter-agency relationships in which they are embedded, and we document in detail the crisis hazard map development process. We distinguish crisis hazard maps from background hazard maps and ashfall prediction maps, illustrating the complementary nature of these three distinct communication mechanisms. We highlight issues that arose and implications for the development of future maps.

Increased Earthquake Rates in the Central and Eastern US Portend Higher Earthquake Hazards

NASA Astrophysics Data System (ADS)

Llenos, A. L.; Rubinstein, J. L.; Ellsworth, W. L.; Mueller, C. S.; Michael, A. J.; McGarr, A.; Petersen, M. D.; Weingarten, M.; Holland, A. A.

2014-12-01

Since 2009 the central and eastern United States has experienced an unprecedented increase in the rate of M≥3 earthquakes that is unlikely to be due to natural variation. Where the rates have increased so has the seismic hazard, making it important to understand these changes. Areas with significant seismicity increases are limited to areas where oil and gas production take place. By far the largest contributor to the seismicity increase is Oklahoma, where recent studies suggest that these rate changes may be due to fluid injection (e.g., Keranen et al., Geology, 2013; Science, 2014). Moreover, the area of increased seismicity in northern Oklahoma that began in 2013 coincides with the Mississippi Lime play, where well completions greatly increased the year before the seismicity increase. This suggests a link to oil and gas production either directly or from the disposal of significant amounts of produced water within the play. For the purpose of assessing the hazard due to these earthquakes, should they be treated differently from natural earthquakes? Previous studies suggest that induced seismicity may differ from natural seismicity in clustering characteristics or frequency-magnitude distributions (e.g., Bachmann et al., GJI, 2011; Llenos and Michael, BSSA, 2013). These differences could affect time-independent hazard computations, which typically assume that clustering and size distribution remain constant. In Oklahoma, as well as other areas of suspected induced seismicity, we find that earthquakes since 2009 tend to be considerably more clustered in space and time than before 2009. However differences between various regional and national catalogs leave unclear whether there are significant changes in magnitude distribution. Whether they are due to natural or industrial causes, the increased earthquake rates in these areas could increase the hazard in ways that are not accounted for in current hazard assessment practice. Clearly the possibility of induced earthquakes needs to be considered in seismic hazard assessments.

Central US earthquake catalog for hazard maps of Memphis, Tennessee

USGS Publications Warehouse

Wheeler, R.L.; Mueller, C.S.

2001-01-01

An updated version of the catalog that was used for the current national probabilistic seismic-hazard maps would suffice for production of large-scale hazard maps of the Memphis urban area. Deaggregation maps provide guidance as to the area that a catalog for calculating Memphis hazard should cover. For the future, the Nuttli and local network catalogs could be examined for earthquakes not presently included in the catalog. Additional work on aftershock removal might reduce hazard uncertainty. Graphs of decadal and annual earthquake rates suggest completeness at and above magnitude 3 for the last three or four decades. Any additional work on completeness should consider the effects of rapid, local population changes during the Nation's westward expansion. ?? 2001 Elsevier Science B.V. All rights reserved.

16 CFR 1500.127 - Substances with multiple hazards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the common or usual name (or the chemical name if there is no common or usual name) for each hazardous... combined with parallel information concerning any additional hazards presented by the article if the...

Asymmetric Information in Iranian’s Health Insurance Market: Testing of Adverse Selection and Moral Hazard

PubMed Central

Lotfi, Farhad; Gorji, Hassan Abolghasem; Mahdavi, Ghadir; Hadian, Mohammad

2015-01-01

Background: Asymmetric information is one of the most important issues in insurance market which occurred due to inherent characteristics of one of the agents involved in insurance contracts; hence its management requires designing appropriate policies. This phenomenon can lead to the failure of insurance market via its two consequences, namely, adverse selection and moral hazard. Objective: This study was aimed to evaluate the status of asymmetric information in Iran’s health insurance market with respect to the demand for outpatient services. Materials/sPatients and Methods: This research is a cross sectional study conducted on households living in Iran. The data of the research was extracted from the information on household’s budget survey collected by the Statistical Center of Iran in 2012. In this study, the Generalized Method of Moment model was used and the status of adverse selection and moral hazard was evaluated through calculating the latent health status of individuals in each insurance category. To analyze the data, Excel, Eviews and stata11 software were used. Results: The estimation of parameters of the utility function of the demand for outpatient services (visit, medicine, and Para-clinical services) showed that households were more risk averse in the use of outpatient care than other goods and services. After estimating the health status of households based on their health insurance categories, the results showed that rural-insured people had the best health status and people with supplementary insurance had the worst health status. In addition, the comparison of the conditional distribution of latent health status approved the phenomenon of adverse selection in all insurance groups, with the exception of rural insurance. Moreover, calculation of the elasticity of medical expenses to reimbursement rate confirmed the existence of moral hazard phenomenon. Conclusions: Due to the existence of the phenomena of adverse selection and moral hazard in most of health insurances categories, policymakers need to adjust contracts so that to reduce these phenomena. Given the importance of financing, the presence of such problems can lead to less coverage of health insurance provided by insurers, loss of contracts with health care institutions and service providers, and lower quality of health services. PMID:26153155

The SARVIEWS Project: Automated SAR Processing in Support of Operational Near Real-time Volcano Monitoring

NASA Astrophysics Data System (ADS)

Meyer, F. J.; Webley, P. W.; Dehn, J.; Arko, S. A.; McAlpin, D. B.; Gong, W.

2016-12-01

Volcanic eruptions are among the most significant hazards to human society, capable of triggering natural disasters on regional to global scales. In the last decade, remote sensing has become established in operational volcano monitoring. Centers like the Alaska Volcano Observatory rely heavily on remote sensing data from optical and thermal sensors to provide time-critical hazard information. Despite this high use of remote sensing data, the presence of clouds and a dependence on solar illumination often limit their impact on decision making. Synthetic Aperture Radar (SAR) systems are widely considered superior to optical sensors in operational monitoring situations, due to their weather and illumination independence. Still, the contribution of SAR to operational volcano monitoring has been limited in the past due to high data costs, long processing times, and low temporal sampling rates of most SAR systems. In this study, we introduce the automatic SAR processing system SARVIEWS, whose advanced data analysis and data integration techniques allow, for the first time, a meaningful integration of SAR into operational monitoring systems. We will introduce the SARVIEWS database interface that allows for automatic, rapid, and seamless access to the data holdings of the Alaska Satellite Facility. We will also present a set of processing techniques designed to automatically generate a set of SAR-based hazard products (e.g. change detection maps, interferograms, geocoded images). The techniques take advantage of modern signal processing and radiometric normalization schemes, enabling the combination of data from different geometries. Finally, we will show how SAR-based hazard information is integrated in existing multi-sensor decision support tools to enable joint hazard analysis with data from optical and thermal sensors. We will showcase the SAR processing system using a set of recent natural disasters (both earthquakes and volcanic eruptions) to demonstrate its robustness. We will also show the benefit of integrating SAR with data from other sensors to support volcano monitoring. For historic eruptions at Okmok and Augustine volcano, both located in the North Pacific, we will demonstrate that the addition of SAR can lead to a significant improvement in activity detection and eruption forecasting.

Statistical analysis of the uncertainty related to flood hazard appraisal

NASA Astrophysics Data System (ADS)

Notaro, Vincenza; Freni, Gabriele

2015-12-01

The estimation of flood hazard frequency statistics for an urban catchment is of great interest in practice. It provides the evaluation of potential flood risk and related damage and supports decision making for flood risk management. Flood risk is usually defined as function of the probability, that a system deficiency can cause flooding (hazard), and the expected damage, due to the flooding magnitude (damage), taking into account both the exposure and the vulnerability of the goods at risk. The expected flood damage can be evaluated by an a priori estimation of potential damage caused by flooding or by interpolating real damage data. With regard to flood hazard appraisal several procedures propose to identify some hazard indicator (HI) such as flood depth or the combination of flood depth and velocity and to assess the flood hazard corresponding to the analyzed area comparing the HI variables with user-defined threshold values or curves (penalty curves or matrixes). However, flooding data are usually unavailable or piecemeal allowing for carrying out a reliable flood hazard analysis, therefore hazard analysis is often performed by means of mathematical simulations aimed at evaluating water levels and flow velocities over catchment surface. As results a great part of the uncertainties intrinsic to flood risk appraisal can be related to the hazard evaluation due to the uncertainty inherent to modeling results and to the subjectivity of the user defined hazard thresholds applied to link flood depth to a hazard level. In the present work, a statistical methodology was proposed for evaluating and reducing the uncertainties connected with hazard level estimation. The methodology has been applied to a real urban watershed as case study.

Additive hazards regression and partial likelihood estimation for ecological monitoring data across space.

PubMed

Lin, Feng-Chang; Zhu, Jun

2012-01-01

We develop continuous-time models for the analysis of environmental or ecological monitoring data such that subjects are observed at multiple monitoring time points across space. Of particular interest are additive hazards regression models where the baseline hazard function can take on flexible forms. We consider time-varying covariates and take into account spatial dependence via autoregression in space and time. We develop statistical inference for the regression coefficients via partial likelihood. Asymptotic properties, including consistency and asymptotic normality, are established for parameter estimates under suitable regularity conditions. Feasible algorithms utilizing existing statistical software packages are developed for computation. We also consider a simpler additive hazards model with homogeneous baseline hazard and develop hypothesis testing for homogeneity. A simulation study demonstrates that the statistical inference using partial likelihood has sound finite-sample properties and offers a viable alternative to maximum likelihood estimation. For illustration, we analyze data from an ecological study that monitors bark beetle colonization of red pines in a plantation of Wisconsin.

Cancer Survival Estimates Due to Non-Uniform Loss to Follow-Up and Non-Proportional Hazards

PubMed

K M, Jagathnath Krishna; Mathew, Aleyamma; Sara George, Preethi

2017-06-25

Background: Cancer survival depends on loss to follow-up (LFU) and non-proportional hazards (non-PH). If LFU is high, survival will be over-estimated. If hazard is non-PH, rank tests will provide biased inference and Cox-model will provide biased hazard-ratio. We assessed the bias due to LFU and non-PH factor in cancer survival and provided alternate methods for unbiased inference and hazard-ratio. Materials and Methods: Kaplan-Meier survival were plotted using a realistic breast cancer (BC) data-set, with >40%, 5-year LFU and compared it using another BC data-set with <15%, 5-year LFU to assess the bias in survival due to high LFU. Age at diagnosis of the latter data set was used to illustrate the bias due to a non-PH factor. Log-rank test was employed to assess the bias in p-value and Cox-model was used to assess the bias in hazard-ratio for the non-PH factor. Schoenfeld statistic was used to test the non-PH of age. For the non-PH factor, we employed Renyi statistic for inference and time dependent Cox-model for hazard-ratio. Results: Five-year BC survival was 69% (SE: 1.1%) vs. 90% (SE: 0.7%) for data with low vs. high LFU respectively. Age (<45, 46-54 & >54 years) was a non-PH factor (p-value: 0.036). However, survival by age was significant (log-rank p-value: 0.026), but not significant using Renyi statistic (p=0.067). Hazard ratio (HR) for age using Cox-model was 1.012 (95%CI: 1.004 -1.019) and the same using time-dependent Cox-model was in the other direction (HR: 0.997; 95% CI: 0.997- 0.998). Conclusion: Over-estimated survival was observed for cancer with high LFU. Log-rank statistic and Cox-model provided biased results for non-PH factor. For data with non-PH factors, Renyi statistic and time dependent Cox-model can be used as alternate methods to obtain unbiased inference and estimates. Creative Commons Attribution License

77 FR 19306 - Announcement of Funding Awards: Office of Healthy Homes and Lead Hazard Control Grant Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Federal Register notice published on May 18, 2011 for Lead Based Paint Hazard Control and Lead Hazard... Based Paint Hazard Control Grant Program A total of $43,206,000 was awarded to 22 grantees for the Lead Based Paint Hazard Control Grant Program and an additional $1,999,971 was awarded to 20 out of the 29...

77 FR 19305 - Announcement of Funding Awards: Office of Healthy Homes and Lead Hazard Control Grant Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Federal Register notice published on September 9, 2010 for Lead Based Paint Hazard Control and Lead Hazard... follows: 1. Lead Based Paint Hazard Control Grant Program A total of $69,700,000 was awarded to 29 grantees for the Lead Based Paint Hazard Control Grant Program and an additional $2,388,637 was awarded to...

Development of the Damage Potential resulting from Avalanche Risks, Case Study Galtür (Tyrol, Austria)

NASA Astrophysics Data System (ADS)

Keiler, M.

2003-04-01

Reports on catastrophes with high damage caused by natural hazards seem to have increased in number recently. A new trend in dealing with these natural processes leads to the integration of risk into natural hazards evaluations and approaches of integral risk management. The risk resulting from natural hazards can be derived from the combination of parameters of physical processes (intensity and recurrence probability) and damage potential (probability of presence and expected damage value). Natural hazard research focuses mainly on the examination, modelling and estimation of individual geomorphological processes as well as on future developments caused by climate change. Even though damage potential has been taken into account more frequently, quantifying statements are still missing. Due to the changes of the socio-economic structures in mountain regions (urban sprawl, population growth, increased mobility and tourism) these studies are mandatory. This study presents a conceptual method that records the damage potential (probability of physical presence, evaluation of buildings) and shows the development of the damage potential resulting from avalanches since 1950. The study area is the community of Galtür, Austria. 36 percent of the existing buildings are found in officially declared avalanche hazard zones. The majority of these buildings are either agricultural or accommodation facilities. Additionally, the effects of physical planning and/or technical measures on the spatial development of the potential damage are illustrated. The results serve to improve risk determination and point out an unnoticed increase of damage potential and risk in apparently safe settlement areas.

Organophosphorus insecticides in honey, pollen and bees (Apis mellifera L.) and their potential hazard to bee colonies in Egypt.

PubMed

Al Naggar, Yahya; Codling, Garry; Vogt, Anja; Naiem, Elsaied; Mona, Mohamed; Seif, Amal; Giesy, John P

2015-04-01

There is no clear single factor to date that explains colony loss in bees, but one factor proposed is the wide-spread application of agrochemicals. Concentrations of 14 organophosphorous insecticides (OPs) in honey bees (Apis mellifera) and hive matrices (honey and pollen) were measured to assess their hazard to honey bees. Samples were collected during spring and summer of 2013, from 5 provinces in the middle delta of Egypt. LC/MS-MS was used to identify and quantify individual OPs by use of a modified Quick Easy Cheap Effective Rugged Safe (QuEChERS) method. Pesticides were detected more frequently in samples collected during summer. Pollen contained the greatest concentrations of OPs. Profenofos, chlorpyrifos, malation and diazinon were the most frequently detected OPs. In contrast, ethoprop, phorate, coumaphos and chlorpyrifos-oxon were not detected. A toxic units approach, with lethality as the endpoint was used in an additive model to assess the cumulative potential for adverse effects posed by OPs. Hazard quotients (HQs) in honey and pollen ranged from 0.01-0.05 during spring and from 0.02-0.08 during summer, respectively. HQs based on lethality due to direct exposure of adult worker bees to OPs during spring and summer ranged from 0.04 to 0.1 for best and worst case respectively. It is concluded that direct exposure and/or dietary exposure to OPs in honey and pollen pose little threat due to lethality of bees in Egypt. Copyright © 2014 Elsevier Inc. All rights reserved.

Recall Listing

MedlinePlus

... Monitors Due to Burn Hazard The video monitor’s batteries can overheat, swell and expand and cause the battery cover to open or come off and expose hot batteries, posing a burn hazard to consumers. Remedy: Consumers ...

More About Hazard-Response Robot For Combustible Atmospheres

NASA Technical Reports Server (NTRS)

Stone, Henry W.; Ohm, Timothy R.

1995-01-01

Report presents additional information about design and capabilities of mobile hazard-response robot called "Hazbot III." Designed to operate safely in combustible and/or toxic atmosphere. Includes cameras and chemical sensors helping human technicians determine location and nature of hazard so human emergency team can decide how to eliminate hazard without approaching themselves.

49 CFR 172.429 - POISON INHALATION HAZARD label.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

49 CFR 172.429 - POISON INHALATION HAZARD label.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

49 CFR 172.555 - POISON INHALATION HAZARD placard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

49 CFR 172.555 - POISON INHALATION HAZARD placard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

49 CFR 172.555 - POISON INHALATION HAZARD placard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

49 CFR 172.555 - POISON INHALATION HAZARD placard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

49 CFR 172.429 - POISON INHALATION HAZARD label.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

49 CFR 172.555 - POISON INHALATION HAZARD placard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

49 CFR 172.429 - POISON INHALATION HAZARD label.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

49 CFR 172.429 - POISON INHALATION HAZARD label.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

Surface contamination of hazardous drug pharmacy storage bins and pharmacy distributor shipping containers.

PubMed

Redic, Kimberly A; Fang, Kayleen; Christen, Catherine; Chaffee, Bruce W

2018-03-01

Purpose This study was conducted to determine whether there is contamination on exterior drug packaging using shipping totes from the distributor and carousel storage bins as surrogate markers of external packaging contamination. Methods A two-part study was conducted to measure the presence of 5-fluorouracil, ifosfamide, cyclophosphamide, docetaxel and paclitaxel using surrogate markers for external drug packaging. In Part I, 10 drug distributor shipping totes designated for transport of hazardous drugs provided a snapshot view of contamination from regular use and transit in and out of the pharmacy. An additional two totes designated for transport of non-hazardous drugs served as controls. In Part II, old carousel storage bins (i.e. those in use pre-study) were wiped for snapshot view of hazardous drug contamination on storage bins. New carousel storage bins were then put into use for storage of the five tested drugs and used for routine storage and inventory maintenance activities. Carousel bins were wiped at time intervals 0, 8, 16 and 52 weeks to measure surface contamination. Results Two of the 10 hazardous shipping totes were contaminated. Three of the five-old carousel bins were contaminated with cyclophosphamide. One of the old carousel bins was also contaminated with ifosfamide. There were no detectable levels of hazardous drugs on any of the new storage bins at time 0, 8 or 16 weeks. However, at the Week 52, there was a detectable level of 5-FU present in the 5-FU carousel bin. Conclusions Contamination of the surrogate markers suggests that external packaging for hazardous drugs is contaminated, either during the manufacturing process or during routine chain of custody activities. These results demonstrate that occupational exposure may occur due to contamination from shipping totes and storage bins, and that handling practices including use of personal protective equipment is warranted.

Safety in the Chemical Laboratory: Hazards in a Photography Lab.

ERIC Educational Resources Information Center

Houk, Cliff; Hart, Charles

1987-01-01

Described are case studies illustrating chemical hazards in a photography lab due to compounds containing cyanide. Suggestions for preventing problems including proper procedures, housekeeping, facilities, and ventilation are considered. (RH)

32 CFR 172.2 - Applicability and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... chemical processing. The recycling of hazardous materials or hazardous waste shall be accomplished with due...-bearing scrap and those items that may be used again for their original purposes or functions without any...

32 CFR 172.2 - Applicability and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... chemical processing. The recycling of hazardous materials or hazardous waste shall be accomplished with due...-bearing scrap and those items that may be used again for their original purposes or functions without any...

32 CFR 172.2 - Applicability and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... chemical processing. The recycling of hazardous materials or hazardous waste shall be accomplished with due...-bearing scrap and those items that may be used again for their original purposes or functions without any...

32 CFR 172.2 - Applicability and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... chemical processing. The recycling of hazardous materials or hazardous waste shall be accomplished with due...-bearing scrap and those items that may be used again for their original purposes or functions without any...

32 CFR 172.2 - Applicability and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... chemical processing. The recycling of hazardous materials or hazardous waste shall be accomplished with due...-bearing scrap and those items that may be used again for their original purposes or functions without any...

The impact of a history of asthma on long-term outcomes of people with newly diagnosed chronic obstructive pulmonary disease: A population study.

PubMed

Kendzerska, Tetyana; To, Teresa M; Aaron, Shawn D; Lougheed, M Diane; Sadatsafavi, Mohsen; FitzGerald, J Mark; Gershon, Andrea S

2017-03-01

Little is known about the natural history of chronic obstructive pulmonary disease (COPD) that has developed from airway remodeling due to asthma, as compared with other COPD phenotypes. We compared long-term health outcomes of individuals with COPD with and without a history of asthma in a population-based cohort study. All individuals with physician-diagnosed COPD between the ages 40 and 55 years from 2009 and 2011 were identified and followed until March 2013 through provincial health administrative data (Ontario, Canada). The exposure was a history of asthma at least 2 years before the diagnosis of COPD to ensure it preceded COPD. The hazards of COPD-, respiratory-, and cardiovascular (CV)-related hospitalizations and all-cause mortality were compared between groups using a Cox regression model controlling for demographic characteristics, comorbidities, and level of health care. Among 9053 patients with COPD, 2717 (30%) had a history of asthma. Over a median of 2.9 years, 712 (8%) individuals had a first COPD hospitalization, 964 (11%) a first respiratory-related and 342 (4%) a first CV-related hospitalization, and 556 (6%) died. Controlling for confounding, a history of asthma was significantly associated with COPD and respiratory-related hospitalizations (hazard ratio, 1.53 [95% CI, 1.29-1.82] and hazard ratio, 1.63 [95% CI, 1.14-1.88], respectively), but not with CV-related hospitalizations or all-cause mortality. Additional analyses confirmed that these findings were not likely a result of unmeasured confounding or misclassification. Middle-aged individuals with physician-diagnosed COPD and a history of asthma had a higher hazard of hospitalizations due to COPD and other respiratory diseases than did those without. Copyright © 2016 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Variabilities in probabilistic seismic hazard maps for natural and induced seismicity in the central and eastern United States

USGS Publications Warehouse

Mousavi, S. Mostafa; Beroza, Gregory C.; Hoover, Susan M.

2018-01-01

Probabilistic seismic hazard analysis (PSHA) characterizes ground-motion hazard from earthquakes. Typically, the time horizon of a PSHA forecast is long, but in response to induced seismicity related to hydrocarbon development, the USGS developed one-year PSHA models. In this paper, we present a display of the variability in USGS hazard curves due to epistemic uncertainty in its informed submodel using a simple bootstrapping approach. We find that variability is highest in low-seismicity areas. On the other hand, areas of high seismic hazard, such as the New Madrid seismic zone or Oklahoma, exhibit relatively lower variability simply because of more available data and a better understanding of the seismicity. Comparing areas of high hazard, New Madrid, which has a history of large naturally occurring earthquakes, has lower forecast variability than Oklahoma, where the hazard is driven mainly by suspected induced earthquakes since 2009. Overall, the mean hazard obtained from bootstrapping is close to the published model, and variability increased in the 2017 one-year model relative to the 2016 model. Comparing the relative variations caused by individual logic-tree branches, we find that the highest hazard variation (as measured by the 95% confidence interval of bootstrapping samples) in the final model is associated with different ground-motion models and maximum magnitudes used in the logic tree, while the variability due to the smoothing distance is minimal. It should be pointed out that this study is not looking at the uncertainty in the hazard in general, but only as it is represented in the USGS one-year models.

Systematic analysis of natural hazards along infrastructure networks using a GIS-tool for risk assessment

NASA Astrophysics Data System (ADS)

Baruffini, Mirko

2010-05-01

Due to the topographical conditions in Switzerland, the highways and the railway lines are frequently exposed to natural hazards as rockfalls, debris flows, landslides, avalanches and others. With the rising incidence of those natural hazards, protection measures become an important political issue. However, they are costly, and maximal protection is most probably not economically feasible. Furthermore risks are distributed in space and time. Consequently, important decision problems to the public sector decision makers are derived. This asks for a high level of surveillance and preservation along the transalpine lines. Efficient protection alternatives can be obtained consequently considering the concept of integral risk management. Risk analysis, as the central part of risk management, has become gradually a generally accepted approach for the assessment of current and future scenarios (Loat & Zimmermann 2004). The procedure aims at risk reduction which can be reached by conventional mitigation on one hand and the implementation of land-use planning on the other hand: a combination of active and passive mitigation measures is applied to prevent damage to buildings, people and infrastructures. With a Geographical Information System adapted to run with a tool developed to manage Risk analysis it is possible to survey the data in time and space, obtaining an important system for managing natural risks. As a framework, we adopt the Swiss system for risk analysis of gravitational natural hazards (BUWAL 1999). It offers a complete framework for the analysis and assessment of risks due to natural hazards, ranging from hazard assessment for gravitational natural hazards, such as landslides, collapses, rockfalls, floodings, debris flows and avalanches, to vulnerability assessment and risk analysis, and the integration into land use planning at the cantonal and municipality level. The scheme is limited to the direct consequences of natural hazards. Thus, we develop a system which integrates the procedures for a complete risk analysis in a Geographic Information System (GIS) toolbox, in order to be applied to our testbed, the Alps-crossing corridor of St. Gotthard. The simulation environment is developed within ArcObjects, the development platform for ArcGIS. The topic of ArcObjects usually emerges when users realize that programming ArcObjects can actually reduce the amount of repetitive work, streamline the workflow, and even produce functionalities that are not easily available in ArcGIS. We have adopted Visual Basic for Applications (VBA) for programming ArcObjects. Because VBA is already embedded within ArcMap and ArcCatalog, it is convenient for ArcGIS users to program ArcObjects in VBA. Our tool visualises the obtained data by an analysis of historical data (aerial photo imagery, field surveys, documentation of past events) or an environmental modeling (estimations of the area affected by a given event), and event such as route number and route position and thematic maps. As a result of this step the record appears in WebGIS. The user can select a specific area to overview previous hazards in the region. After performing the analysis, a double click on the visualised infrastructures opens the corresponding results. The constantly updated risk maps show all sites that require more protection against natural hazards. The final goal of our work is to offer a versatile tool for risk analysis which can be applied to different situations. Today our GIS application mainly centralises the documentation of natural hazards. Additionally the system offers information about natural hazard at the Gotthard line. It is very flexible and can be used as a simple program to model the expansion of natural hazards, as a program of quantitatively estimate risks or as a detailed analysis at a municipality level. The tool is extensible and can be expanded with additional modules. The initial results of the experimental case study show how useful a GIS-based system can be for effective and efficient disaster response management. In the coming years our GIS application will be a data base containing all information needed for the evaluation of risk sites along the Gotthard line. Our GIS application can help the technical management to decide about protection measures because of, in addition to the visualisation, tools for spatial data analysis will be available. REFERENCES Bründl M. (Ed.) 2009 : Risikokonzept für Naturgefahren - Leitfaden. Nationale Plattform für Naturgefahren PLANAT, Bern. 416 S. BUWAL 1999: Risikoanalyse bei gravitativen Naturgefahren - Methode, Fallbeispiele und Daten (Risk analyses for gravitational natural hazards). Bundesamt für Umwelt, Wald und Landschaft (BUWAL). Umwelt-Materialen Nr. 107, 1-244. Loat, R. & Zimmermann, M. 2004: La gestion des risques en Suisse (Risk Management in Switzerland). In: Veyret, Y., Garry, G., Meschinet de Richemont, N. & Armand Colin (eds) 2002: Colloque Arche de la Défense 22-24 octobre 2002, dans Risques naturels et aménagement en Europe, 108-120. Maggi R. et al, 2009: Evaluation of the optimal resilience for vulnerable infrastructure networks. An interdisciplinary pilot study on the transalpine transportation corridors, NRP 54 "Sustainable Development of the Built Environment", Projekt Nr. 405 440, Final Scientific Report, Lugano

Migration and Environmental Hazards

PubMed Central

Hunter, Lori M.

2011-01-01

Losses due to natural hazards (e.g., earthquakes, hurricanes) and technological hazards (e.g., nuclear waste facilities, chemical spills) are both on the rise. One response to hazard-related losses is migration, with this paper offering a review of research examining the association between migration and environmental hazards. Using examples from both developed and developing regional contexts, the overview demonstrates that the association between migration and environmental hazards varies by setting, hazard types, and household characteristics. In many cases, however, results demonstrate that environmental factors play a role in shaping migration decisions, particularly among those most vulnerable. Research also suggests that risk perception acts as a mediating factor. Classic migration theory is reviewed to offer a foundation for examination of these associations. PMID:21886366

78 FR 12780 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

... INFORMATION CONTACT: To request additional information about this ICR, Elizabeth Lemersal, Earthquake Hazards... . SUPPLEMENTARY INFORMATION: Title: Earthquake Hazards Program Research and Monitoring. OMB Control Number: 1028... findings are essential to fulfilling USGS's responsibility under the Earthquake Hazards Reduction Act to...

Enhanced control & sensing for the REMOTEC ANDROS Mk VI robot. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spelt, P.F.; Harvey, H.W.

1997-08-01

This Cooperative Research and Development Agreement (CRADA) between Lockheed Marietta Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot`s performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mkmore » VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory`s Center for Engineering Systems Advanced Research (CESAR, B&R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding.« less

76 FR 36318 - Safety Zone; Waterway Closure, Morgan City-Port Allen Route From Mile Marker 0 to Port Allen Lock

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-22

... to hazards associated with rising flood water. DATES: Effective Date: this rule is effective in the..., vessels and tows from the hazards associated with rising flood water on the Morgan City-Port Allen Route... system, vessels and tows from destruction, loss or injury due to the hazards associated with rising flood...

Landslide hazard in Bukavu (DR Congo): a geomorphological assessment in a data-poor context

NASA Astrophysics Data System (ADS)

Dewitte, Olivier; Mugaruka Bibentyo, Toussaint; Kulimushi Matabaro, Sylvain; Balegamire, Clarisse; Basimike, Joseph; Delvaux, Damien; Dille, Antoine; Ganza Bamulezi, Gloire; Jacobs, Liesbet; Michellier, Caroline; Monsieurs, Elise; Mugisho Birhenjira, Espoir; Nshokano, Jean-Robert; Nzolang, Charles; Kervyn, François

2017-04-01

Many cities in the Global South are known for facing an important increase in their population size. Many of them are then struggling with the sprawl of new settlements and very often urban planning and sustainable management policies are limited, if not non-existent. When those cities are set in landslide-prone environments, this situation is even more problematic. Despite these environmental constrains, landslide hazard assessments relevant for landscape planning remain rare. The objective of this research is to assess the landslide hazard in Bukavu, a city in DR Congo that is facing such a situation. We used a geomorphological approach (adapted from Cardinali et al., 2002) taking into account the data-poor context and the impact of anthropogenic activities. First, we built a multi-temporal historical inventory for a period of 60 years. A total of 151 landslides were mapped (largest landslide 1.5 km2). Their cumulative areas cover 29% of the urban territory and several types of processes are identified. Changes in the distribution and pattern of landslides allowed then to infer the possible evolution of the slopes, the most probable type of failures, and their expected frequency of occurrence and intensity. Despite this comprehensive inventory, hazard linked to the occurrence of new large deep-seated slides cannot be assessed due a scarcity of reliable data on the environmental factors controlling their occurrence. In addition, age estimation of the occurrence of some of the largest landslides refers to periods at the beginning of the Holocene where climatic and seismic conditions were probably different. Therefore, based on the inventory, we propose four hazard scenarios that coincide with today's environment. Hazard assessment was done for (1) reactivation of deep-seated slides, (2) occurrence of new small shallow slides, (3) rock falls, and (4) movements within existing landslides. Based on these assessments, we produced four hazard maps that indicate the zones where landslides may occur as well as the runout zones. Rock fall hazard concerns a very small portion of the urban territory. The other three hazards are much more widely spread. For these three scenarios, the hazard is the highest in areas that cover about 5 to 10% of the urban territory. The maps are presented in four classes. They present an information that can be easily used for further risk analysis and/or urban planning purposes.

[A Literature Review of Health Effects on Workers in Disasters].

PubMed

Igarashi, Yu; Mori, Koji

2015-09-01

Various types of disasters, such as natural disasters, industrial accidents and crimes, often occur in the workplace and many workers are involved in them. They are not only directly injured but also exposed to health hazards, such as terrible experiences and chemical materials. Occupational health specialists are expected to act to minimize the adverse health effects from them speedily and appropriately. It is assumed that learning from past cases is effective for such occupational health activities. Accordingly, we conducted a literature review about the health effects on workers in disasters. Relevant literature was searched in PubMed. Twenty four studies were extracted by our criteria. In this review, subjects were limited to general workers by excluding professional workers, such as emergency services and firefighters. The health effects were examined as follows: mental health (13 articles), respiratory (5), cardiovascular (2), musculoskeletal (1), skin (1), nervous (1), and general (1). It was obvious that few studies on general workers were published when considering large number of disasters in the past. Factors that affect health outcomes were categorized into ① those related to devastation of environment of work and life due to disaster, and ② those related to health hazards due to disasters. Knowledge from the review will support the activities of occupational health specialists during disasters, but additional studies are needed.

Distributions of strong ground motion due to dynamic ruptures across a bimaterial fault: Implications for seismic hazard analyses

NASA Astrophysics Data System (ADS)

Yuan, Jie; Zhu, Shoubiao

2016-12-01

We perform 2-D finite element calculations of mode II rupture along a bimaterial interface governed by regularized rate- and state-dependent friction law, with the goal of understanding how the bimaterial interface influences the strong ground motion. By comparison with properties of rupture in a homogeneous solid, we found that bimaterial mechanism is important for earthquake ruptures and influences the strong ground motion significantly. The simulated results show that mode II rupture evolves with propagation distance along a bimaterial interface to a unilateral wrinkle-like pulse in the direction of slip on the compliant side of the fault, namely in the positive direction. Strong ground motion caused by seismic waves emanated from the rupture propagation is asymmetrically distributed in space. The computed peak ground acceleration (PGA) is high in the near-fault region. Particularly, PGA is much larger in the region on the side in the positive direction. In addition, it is greater in the more compliant area of the model than that in the stiffer area with corresponding locations. Moreover, the differential PGA due to bimaterial effect increases with increasing degree of material contrast across the fault. It is hoped that the results obtained in this investigation will provide some implications for seismic hazard assessment and fault rupture mechanics.

Occurrence and quantitative microbial risk assessment of Cryptosporidium and Giardia in soil and air samples.

PubMed

Balderrama-Carmona, Ana Paola; Gortáres-Moroyoqui, Pablo; Álvarez-Valencia, Luis Humberto; Castro-Espinoza, Luciano; Mondaca-Fernández, Iram; Balderas-Cortés, José de Jesús; Chaidez-Quiroz, Cristóbal; Meza-Montenegro, María Mercedes

2014-09-01

Cryptosporidium oocysts and Giardia cysts can be transmitted by the fecal-oral route and may cause gastrointestinal parasitic zoonoses. These zoonoses are common in rural zones due to the parasites being harbored in fecally contaminated soil. This study assessed the risk of illness (giardiasis and cryptosporidiosis) from inhaling and/or ingesting soil and/or airborne dust in Potam, Mexico. To assess the risk of infection, Quantitative Microbial Risk Assessment (QMRA) was employed, with the following steps: (1) hazard identification, (2) hazard exposure, (3) dose-response, and (4) risk characterization. Cryptosporidium oocysts and Giardia cysts were observed in 52% and 57%, respectively, of total soil samples (n=21), and in 60% and 80%, respectively, of air samples (n=12). The calculated annual risks were higher than 9.9 × 10(-1) for both parasites in both types of sample. Soil and air inhalation and/or ingestion are important vehicles for these parasites. To our knowledge, the results obtained in the present study represent the first QMRAs for cryptosporidiosis and giardiasis due to soil and air inhalation/ingestion in Mexico. In addition, this is the first evidence of the microbial air quality around these parasites in rural zones. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Probabilistic Seismic Hazard Assessment of the Chiapas State (SE Mexico)

NASA Astrophysics Data System (ADS)

Rodríguez-Lomelí, Anabel Georgina; García-Mayordomo, Julián

2015-04-01

The Chiapas State, in southeastern Mexico, is a very active seismic region due to the interaction of three tectonic plates: Northamerica, Cocos and Caribe. We present a probabilistic seismic hazard assessment (PSHA) specifically performed to evaluate seismic hazard in the Chiapas state. The PSHA was based on a composited seismic catalogue homogenized to Mw and was used a logic tree procedure for the consideration of different seismogenic source models and ground motion prediction equations (GMPEs). The results were obtained in terms of peak ground acceleration as well as spectral accelerations. The earthquake catalogue was compiled from the International Seismological Center and the Servicio Sismológico Nacional de México sources. Two different seismogenic source zones (SSZ) models were devised based on a revision of the tectonics of the region and the available geomorphological and geological maps. The SSZ were finally defined by the analysis of geophysical data, resulting two main different SSZ models. The Gutenberg-Richter parameters for each SSZ were calculated from the declustered and homogenized catalogue, while the maximum expected earthquake was assessed from both the catalogue and geological criteria. Several worldwide and regional GMPEs for subduction and crustal zones were revised. For each SSZ model we considered four possible combinations of GMPEs. Finally, hazard was calculated in terms of PGA and SA for 500-, 1000-, and 2500-years return periods for each branch of the logic tree using the CRISIS2007 software. The final hazard maps represent the mean values obtained from the two seismogenic and four attenuation models considered in the logic tree. For the three return periods analyzed, the maps locate the most hazardous areas in the Chiapas Central Pacific Zone, the Pacific Coastal Plain and in the Motagua and Polochic Fault Zone; intermediate hazard values in the Chiapas Batholith Zone and in the Strike-Slip Faults Province. The hazard decreases towards the northeast across the Reverse Faults Province and up to Yucatan Platform, where the lowest values are reached. We also produced uniform hazard spectra (UHS) for the three main cities of Chiapas. Tapachula city presents the highest spectral accelerations, while Tuxtla Gutierrez and San Cristobal de las Casas cities show similar values. We conclude that seismic hazard in Chiapas is chiefly controlled by the subduction of the Cocos beneath Northamerica and Caribe tectonic plates, that makes the coastal areas the most hazardous. Additionally, the Motagua and Polochic Fault Zones are also important, increasing the hazard particularly in southeastern Chiapas.

77 FR 58216 - Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of... Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby... hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in...

77 FR 23541 - Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-19

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of... Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby... hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in...

77 FR 64845 - Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Notice of... Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby... hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in...

77 FR 18844 - Proposed Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

...: Internal Agency Docket No. FEMA-B-1236] Proposed Flood Hazard Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice. SUMMARY: Comments are requested on proposed flood hazard determinations, which may include additions or modifications of any Base Flood Elevation (BFE), base flood depth...

78 FR 49277 - Proposed Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

...: Internal Agency Docket No. FEMA-B-1345] Proposed Flood Hazard Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice. SUMMARY: Comments are requested on proposed flood hazard determinations, which may include additions or modifications of any Base Flood Elevation (BFE), base flood depth...

Risk in nuclear power plants due to natural hazard phenomena

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, S.C.

1995-12-01

For the safety of nuclear power plants, it is important to identify potential areas of vulnerabilities to internal as well as external events to which nuclear power plants are exposed. This paper summarizes the risk in nuclear power plants due to natural hazard phenomena such as earthquakes, winds and tornadoes, floods, etc. The reported results are based on a limited number of probabilistic risk assessments (PRAS) performed for a few of the operating nuclear power plants within the United States. The summary includes an importance ranking of various natural hazard phenomena based on their contribution to the plant risk alongmore » with insights observed from the PRA studies.« less

Dust Hazard Management in the Outer Solar System

NASA Technical Reports Server (NTRS)

Seal, David A.

2012-01-01

Most robotic missions to the outer solar system must grapple with the hazards posed by the dusty rings of the gas giants. Early assessments of these hazards led simply to ring avoidance due to insufficient data and high uncertainties on the dust population present in such rings. Recent approaches, principal among them the Cassini dust hazard management strategy, provide useful results from detailed modeling of spacecraft vulnerabilities and dust hazard regions, which along with the range of mission trajectories are used to to assess the risks posed by each passage through a zone of potential hazard. This paper shows the general approach used to implement the analysis for Cassini, with recommendations for future outer planet missions.

Heavy Metal Risk Management: Case Analysis

PubMed Central

Kim, Ji Ae; Lee, Seung Ha; Choi, Seung Hyun; Jung, Ki Kyung; Park, Mi Sun; Jeong, Ji Yoon; Hwang, Myung Sil; Yoon, Hae Jung; Choi, Dal Woong

2012-01-01

To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods. PMID:24278603

Conceptual Development of a National Volcanic Hazard Model for New Zealand

NASA Astrophysics Data System (ADS)

Stirling, Mark; Bebbington, Mark; Brenna, Marco; Cronin, Shane; Christophersen, Annemarie; Deligne, Natalia; Hurst, Tony; Jolly, Art; Jolly, Gill; Kennedy, Ben; Kereszturi, Gabor; Lindsay, Jan; Neall, Vince; Procter, Jonathan; Rhoades, David; Scott, Brad; Shane, Phil; Smith, Ian; Smith, Richard; Wang, Ting; White, James D. L.; Wilson, Colin J. N.; Wilson, Tom

2017-06-01

We provide a synthesis of a workshop held in February 2016 to define the goals, challenges and next steps for developing a national probabilistic volcanic hazard model for New Zealand. The workshop involved volcanologists, statisticians, and hazards scientists from GNS Science, Massey University, University of Otago, Victoria University of Wellington, University of Auckland, and University of Canterbury. We also outline key activities that will develop the model components, define procedures for periodic update of the model, and effectively articulate the model to end-users and stakeholders. The development of a National Volcanic Hazard Model is a formidable task that will require long-term stability in terms of team effort, collaboration and resources. Development of the model in stages or editions that are modular will make the process a manageable one that progressively incorporates additional volcanic hazards over time, and additional functionalities (e.g. short-term forecasting). The first edition is likely to be limited to updating and incorporating existing ashfall hazard models, with the other hazards associated with lahar, pyroclastic density currents, lava flow, ballistics, debris avalanche, and gases/aerosols being considered in subsequent updates.

Local characteristics of cross-unit contamination around high-rise building due to wind effect: mean concentration and infection risk assessment.

PubMed

Liu, X P; Niu, J L; Kwok, K C S; Wang, J H; Li, B Z

2011-08-15

In this present work, the characteristics of hazardous gas dispersion and possible cross-unit contamination around a complex-shaped high-rise residential building due to wind effect are thoroughly studied using physical modeling method. Experiments were performed in a boundary layer wind tunnel for a 1:30 scale model that represented a 10-story residential building in prototype. Tracer gas, simulating exhausted room air, was continuously released from different floor levels, and its concentrations on the adjacent envelope surfaces were measured using fast flame ionization detectors. The mean concentration fields were reported and analyzed under different configurations during the experiment to consider the effects on pollutant dispersion behavior due to changes in source position and approaching wind condition, with the main emphasis on the differences between open-window and closed-window conditions. In particular, the measured concentration fields were further examined from a practical point of view, with respect to hazard assessment. Understanding these hazardous plume dispersion features is useful for employing effective intervention strategies in modern residential building environment in case of hazardous substance release. The study on this physical process is not only helpful to reduce the hazardous effect of routine release of harmful pollutant near the building, but also useful for the purpose of prevention and control of accidental infectious diseases outbreak. Copyright © 2011 Elsevier B.V. All rights reserved.

Design and application analysis of prediction system of geo-hazards based on GIS in the Three Gorges Reservoir

NASA Astrophysics Data System (ADS)

Li, Deying; Yin, Kunlong; Gao, Huaxi; Liu, Changchun

2009-10-01

Although the project of the Three Gorges Dam across the Yangtze River in China can utilize this huge potential source of hydroelectric power, and eliminate the loss of life and damage by flood, it also causes environmental problems due to the big rise and fluctuation of the water, such as geo-hazards. In order to prevent and predict geo-hazards, the establishment of prediction system of geo-hazards is very necessary. In order to implement functions of hazard prediction of regional and urban geo-hazard, single geo-hazard prediction, prediction of landslide surge and risk evaluation, logical layers of the system consist of data capturing layer, data manipulation and processing layer, analysis and application layer, and information publication layer. Due to the existence of multi-source spatial data, the research on the multi-source transformation and fusion data should be carried on in the paper. Its applicability of the system was testified on the spatial prediction of landslide hazard through spatial analysis of GIS in which information value method have been applied aims to identify susceptible areas that are possible to future landslide, on the basis of historical record of past landslide, terrain parameter, geology, rainfall and anthropogenic activity. Detailed discussion was carried out on spatial distribution characteristics of landslide hazard in the new town of Badong. These results can be used for risk evaluation. The system can be implemented as an early-warning and emergency management tool by the relevant authorities of the Three Gorges Reservoir in the future.

Occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Malaysia

PubMed Central

Abdullahi, Auwalu; Hassan, Azmi; Kadarman, Norizhar; Junaidu, Yakubu Muhammad; Adeyemo, Olanike Kudrat; Lua, Pei Lin

2016-01-01

Purpose This study aims to investigate the occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Terengganu State, Malaysia. Occupational hazards are the major source of morbidity and mortality among the animal workers due to exposure to many hazardous situations in their daily practices. Occupational infections mostly contracted by abattoir workers could be caused by iatrogenic or transmissible agents, including viruses, bacteria, fungi, and parasites and the toxins produced by these organisms. Materials and methods The methodology was based on a cross-sectional survey using cluster sampling technique in the four districts of Terengganu State, Malaysia. One hundred and twenty-one abattoir workers from five abattoirs were assessed using a validated structured questionnaire and an observation checklist. Results The mean and standard deviation of occupational hazards scores of the workers were 2.32 (2.721). Physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards were the major findings of this study. However, the highest prevalence of occupational hazards identified among the workers was injury by sharp equipment such as a knife (20.0%), noise exposure (17.0%), and due to offensive odor within the abattoir premises (12.0%). Conclusion The major occupational hazards encountered by the workers in the study area were physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards. To ensure proper control of occupational health hazards among the abattoir workers, standard design and good environmental hygiene must be taken into consideration all the time. Exposure control plan, which includes risk identification, risk characterization, assessment of workers at risk, risk control, workers’ education/training, and implementation of safe work procedures, should be implemented by the government and all the existing laws governing the abattoir operation in the country should be enforced. PMID:27471416

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... BAN OF EXTREMELY FLAMMABLE CONTACT ADHESIVES § 1302.4 Banned hazardous products. Any extremely flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or...

JANNAF workshop on hazards due to pre-combustion behavior of high energy propellants

NASA Technical Reports Server (NTRS)

Boggs, T. L.

1980-01-01

Experimental results and hazards associated with the pre-combustion behavior of high energy propellants are discussed. Special attention was given to future needs for modeling and the problem of deflagration to detonation transition.

Environmental legislation as the legal framework for mitigating natural hazards in Spain

NASA Astrophysics Data System (ADS)

Garrido, Jesús; Arana, Estanislao; Jiménez Soto, Ignacio; Delgado, José

2015-04-01

In Spain, the socioeconomic losses due to natural hazards (floods, earthquakes or landslides) are considerable, and the indirect costs associated with them are rarely considered because they are very difficult to evaluate. The prevention of losses due to natural hazards is more economic and efficient through legislation and spatial planning rather than through structural measures, such as walls, anchorages or structural reinforcements. However, there isn't a Spanish natural hazards law and national and regional sector legislation make only sparse mention of them. After 1978, when the Spanish Constitution was enacted, the Autonomous Communities (Spanish regions) were able to legislate according to the different competences (urban planning, environment or civil protection), which were established in the Constitution. In the 1990's, the Civil Protection legislation (national law and regional civil protection tools) dealt specifically with natural hazards (floods, earthquakes and volcanoes), but this was before any soil, seismic or hydrological studies were recommended in the national sector legislation. On the other hand, some Autonomous Communities referred to natural hazards in the Environmental Impact Assessment legislation (EIA) and also in the spatial and urban planning legislation and tools. The National Land Act, enacted in 1998, established, for the first time, that those lands exposed to natural hazards should be classified as non-developable. The Spanish recast text of the Land Act, enacted by Royal Legislative Decree 2/2008, requires that a natural hazards map be included in the Environmental Sustainability Report (ESR), which is compulsory for all master plans, according to the provisions set out by Act 9/2006, known as Spanish Strategic Environmental Assessment (SEA). Consequently, the environmental legislation, after the aforementioned transposition of the SEA European Directive 2001/42/EC, is the legal framework to prevent losses due to natural hazards through land use planning. However, most of the Spanish master plans approved after 2008 don't include a natural hazards map or/and don't classify the areas exposed to natural hazards as non-developable. Restrictions or prohibitions for building in natural hazard-prone areas are not usually established in the master plans. According to the jurisprudence, the environmental legislation prevails over spatial and urban planning regulations. On the other hand, the precedence of the national competence in public security would allow reclassification or the land, independently of the political or economic motivations of the municipal government. Despite of the technical building code or the seismic building code where some recommendations for avoiding "geotechnical" or seismic hazards are established, there are not compulsory guidelines to do technical studies/hazard maps for floods or landslides. The current legislation should be improved, under a technical point of view, and some mechanisms for enforcing the law should be also considered.

Earthquake Hazard Mitigation Using a Systems Analysis Approach to Risk Assessment

NASA Astrophysics Data System (ADS)

Legg, M.; Eguchi, R. T.

2015-12-01

The earthquake hazard mitigation goal is to reduce losses due to severe natural events. The first step is to conduct a Seismic Risk Assessment consisting of 1) hazard estimation, 2) vulnerability analysis, 3) exposure compilation. Seismic hazards include ground deformation, shaking, and inundation. The hazard estimation may be probabilistic or deterministic. Probabilistic Seismic Hazard Assessment (PSHA) is generally applied to site-specific Risk assessments, but may involve large areas as in a National Seismic Hazard Mapping program. Deterministic hazard assessments are needed for geographically distributed exposure such as lifelines (infrastructure), but may be important for large communities. Vulnerability evaluation includes quantification of fragility for construction or components including personnel. Exposure represents the existing or planned construction, facilities, infrastructure, and population in the affected area. Risk (expected loss) is the product of the quantified hazard, vulnerability (damage algorithm), and exposure which may be used to prepare emergency response plans, retrofit existing construction, or use community planning to avoid hazards. The risk estimate provides data needed to acquire earthquake insurance to assist with effective recovery following a severe event. Earthquake Scenarios used in Deterministic Risk Assessments provide detailed information on where hazards may be most severe, what system components are most susceptible to failure, and to evaluate the combined effects of a severe earthquake to the whole system or community. Casualties (injuries and death) have been the primary factor in defining building codes for seismic-resistant construction. Economic losses may be equally significant factors that can influence proactive hazard mitigation. Large urban earthquakes may produce catastrophic losses due to a cascading of effects often missed in PSHA. Economic collapse may ensue if damaged workplaces, disruption of utilities, and resultant loss of income produces widespread default on payments. With increased computational power and more complete inventories of exposure, Monte Carlo methods may provide more accurate estimation of severe losses and the opportunity to increase resilience of vulnerable systems and communities.

Probabilistic seismic hazard estimates incorporating site effects - An example from Indiana, U.S.A

USGS Publications Warehouse

Hasse, J.S.; Park, C.H.; Nowack, R.L.; Hill, J.R.

2010-01-01

The U.S. Geological Survey (USGS) has published probabilistic earthquake hazard maps for the United States based on current knowledge of past earthquake activity and geological constraints on earthquake potential. These maps for the central and eastern United States assume standard site conditions with Swave velocities of 760 m/s in the top 30 m. For urban and infrastructure planning and long-term budgeting, the public is interested in similar probabilistic seismic hazard maps that take into account near-surface geological materials. We have implemented a probabilistic method for incorporating site effects into the USGS seismic hazard analysis that takes into account the first-order effects of the surface geologic conditions. The thicknesses of sediments, which play a large role in amplification, were derived from a P-wave refraction database with over 13, 000 profiles, and a preliminary geology-based velocity model was constructed from available information on S-wave velocities. An interesting feature of the preliminary hazard maps incorporating site effects is the approximate factor of two increases in the 1-Hz spectral acceleration with 2 percent probability of exceedance in 50 years for parts of the greater Indianapolis metropolitan region and surrounding parts of central Indiana. This effect is primarily due to the relatively thick sequence of sediments infilling ancient bedrock topography that has been deposited since the Pleistocene Epoch. As expected, the Late Pleistocene and Holocene depositional systems of the Wabash and Ohio Rivers produce additional amplification in the southwestern part of Indiana. Ground motions decrease, as would be expected, toward the bedrock units in south-central Indiana, where motions are significantly lower than the values on the USGS maps.

Use of multitemporal InSAR data to develop geohazard scenarios for Bandung, Western Java, Indonesia

NASA Astrophysics Data System (ADS)

Salvi, Stefano; Tolomei, Cristiano; Duro, Javier; Pezzo, Giuseppe; Koudogbo, Fifamè

2015-04-01

The Greater Bandung metropolitan area is the second largest urban area in Indonesia, with a population of 8.6 million. It is subject to a variety of geohazards: volcanic hazards from seven active volcanoes within a radius of 50 km; high flood hazards, seismic hazard due to crustal active faults, the best known being the 30-km long Lembang fault, 10 km North of the city centre; subsidence hazards due to strong aquifer depletion; landslide hazard in the surrounding high country. In the framework of the FP7 RASOR project, multitemporal satellite SAR data have been processed over Bandung, Western Java. We used the SBAS InSAR technique (Berardino et al., 2002) to process two ALOS-1 datasets, to investigate the various sources of surface deformation acting in the area in the period 2008-2011. Persistent Scatterer Interferometry (PSI) has also been applied to achieve ground motion measurements with millimetric precision and high accuracy. The PSI processing technique considers a system of points that reflect the radar signal from the satellite continuously through the time. It makes use of differential interferometric phase measurements to generate long term terrain deformation and digital surface model maps. The GlobalSARTM algorithms developed by Altamira Information are applied to COSMO-SkyMed data acquired to measure ground motion over the area of interest. Strong ground displacements (up to 7 cm/yr) due to groundwater abstraction have been measured in the Bandung basin. The identification of long wavelength signals from tectonic sources is difficult due to the limited InSAR coherence outside of the urban environment. Limited deformation is observed also in the Tangkuban Perahu volcano to the north. The spatial and temporal distribution of the ground motion is important supporting information for the generation of long term subsidence and flood hazard scenarios.

Emerging role of phenolic compounds as natural food additives in fish and fish products.

PubMed

Maqsood, Sajid; Benjakul, Soottawat; Shahidi, Fereidoon

2013-01-01

Chemical and microbiological deteriorations are principal causes of quality loss of fish and fish products during handling, processing, and storage. Development of rancid odor and unpleasant flavor, changes of color and texture as well as lowering nutritional value in fish can be prevented by appropriate use of additives. Due to the potential health hazards of synthetic additives, natural products, especially antioxidants and antimicrobial agents, have been intensively examined as safe alternatives to synthetic compounds. Polyphenols (PP) are the natural antioxidants prevalent in fruits, vegetables, beverages (tea, wine, juices), plants, seaweeds, and some herbs and show antioxidative and antimicrobial activities in different fish and fish products. The use of phenolic compounds also appears to be a good alternative for sulphiting agent for retarding melanosis in crustaceans. Phenolic compounds have also been successfully employed as the processing aid for texture modification of fish mince and surimi. Thus, plant polyphenolic compounds can serve as potential additives for preventing quality deterioration or to retain the quality of fish and fish products.

Environmental management of industrial hazardous wastes in India.

PubMed

Dutta, Shantanu K; Upadhyay, V P; Sridharan, U

2006-04-01

Hazardous wastes are considered highly toxic and therefore disposal of such wastes needs proper attention so as to reduce possible environmental hazards. Industrial growth has resulted in generation of huge volume of hazardous wastes in the country. In addition to this, hazardous wastes sometimes get imported mainly from the western countries for re-processing or recycling. Inventorisation of hazardous wastes generating units in the country is not yet completed. Scientific disposal of hazardous wastes has become a major environmental issue in India. Hazardous Wastes (Management and Handling) Rules, 1989 have been framed by the Central Government and amended in 2000 and 2003 to deal with the hazardous wastes related environmental problems that may arise in the near future. This paper gives details about the hazardous wastes management in India. Health effects of the selected hazardous substances are also discussed in the paper.

78 FR 29760 - Final Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-21

... accordance with section 110 of the Flood Disaster Protection Act of 1973, 42 U.S.C. 4104, and 44 CFR part 67...] Final Flood Hazard Determinations AGENCY: Federal Emergency Management Agency, DHS. ACTION: Final Notice. SUMMARY: Flood hazard determinations, which may include additions or modifications of Base Flood...

Bayesian hierarchical modelling of North Atlantic windiness

NASA Astrophysics Data System (ADS)

Vanem, E.; Breivik, O. N.

2013-03-01

Extreme weather conditions represent serious natural hazards to ship operations and may be the direct cause or contributing factor to maritime accidents. Such severe environmental conditions can be taken into account in ship design and operational windows can be defined that limits hazardous operations to less extreme conditions. Nevertheless, possible changes in the statistics of extreme weather conditions, possibly due to anthropogenic climate change, represent an additional hazard to ship operations that is less straightforward to account for in a consistent way. Obviously, there are large uncertainties as to how future climate change will affect the extreme weather conditions at sea and there is a need for stochastic models that can describe the variability in both space and time at various scales of the environmental conditions. Previously, Bayesian hierarchical space-time models have been developed to describe the variability and complex dependence structures of significant wave height in space and time. These models were found to perform reasonably well and provided some interesting results, in particular, pertaining to long-term trends in the wave climate. In this paper, a similar framework is applied to oceanic windiness and the spatial and temporal variability of the 10-m wind speed over an area in the North Atlantic ocean is investigated. When the results from the model for North Atlantic windiness is compared to the results for significant wave height over the same area, it is interesting to observe that whereas an increasing trend in significant wave height was identified, no statistically significant long-term trend was estimated in windiness. This may indicate that the increase in significant wave height is not due to an increase in locally generated wind waves, but rather to increased swell. This observation is also consistent with studies that have suggested a poleward shift of the main storm tracks.

Assessment of occupational exposure in a granite quarry and processing factory.

PubMed

Tejado, J J; Guillén, J; Baeza, A

2016-09-01

Workers in the granite industry face an occupational hazard: silicosis due to the crystalline silica present in inhalable dust. As granite can also present a variable, and occasionally significant, content of naturally occurring radionuclides, they may also face a radiological hazard. In order to assess the risk, a granite industry with a quarry and processing factory was selected to assess the occupational exposure. Three main potential pathways were observed: external irradiation, inhalation of granite dust, and radon exposure. The external dose rate was similar to that in a nearby farming area. A slight increment (0.016-0.076 mSv yr -1 ) was observed in the quarry and stockpile, due to quarry faces and granite blocks. The effective dose due to granite dust inhalation was 0.182  ±  0.009 mSv yr -1 in the worst case scenario (3 mg m -3 dust load in air and no use of filter masks). Thus, the mean value of the effective dose from these two pathways was 0.26 mSv yr -1 , lower than the reference level of 1 mSv yr -1 for the general population. The annual mean value of radon concentration in the indoor air was 33 Bq m -3 . However, during granite processing works the radon concentration can increase up to 216 Bq m -3 , due to mechanical operations (sawing, polishing, sanding, etc). This radon concentration was below the 600 Bq m -3 reference level for action in working places. Therefore, workers in this granite factory face no significant additional radiological exposure, and no-one needs to be designated as occupationally exposed and subject to individual dosimetry.

Commodity Flow Study - Clark County, Nevada, USA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conway, S.Ph.D.; Navis, I.

2008-07-01

The United States Department of Energy has designated Clark County, Nevada as an 'Affected Unit of Local Government' due to the potential for impacts by activities associated with the Yucca Mountain High Level Nuclear Waste Repository project. Urban Transit, LLC has led a project team of transportation including experts from the University of Nevada Las Vegas Transportation Research Center to conduct a hazardous materials community flow study along Clark County's rail and truck corridors. In addition, a critical infrastructure analysis has also been carried out in order to assess the potential impacts of transportation within Clark County of high levelmore » nuclear waste and spent nuclear fuel to a proposed repository 90 miles away in an adjacent county on the critical infrastructure in Clark County. These studies were designed to obtain information relating to the transportation, identification and routing of hazardous materials through Clark County. Coordinating with the United States Department of Energy, the U.S. Department of Agriculture, the U. S. Federal Highway Administration, the Nevada Department of Transportation, and various other stakeholders, these studies and future research will examine the risk factors along the entire transportation corridor within Clark County and provide a context for understanding the additional vulnerability associated with shipping spent fuel through Clark County. (authors)« less

Subjective Risk Assessment and Perception in the Greek and English Bakery Industries

PubMed Central

Alexopoulos, Evangelos C.; Kavadi, Zafira; Bakoyannis, Giorgos; Papantonopoulos, Sotiris

2009-01-01

Several factors influencing risk perception in the area of occupational health and safety are known, but there is still lack of a full understanding of the ways in which people characterize risk. This study aimed to provide an insight of employee risk assessment and perception in the bakery industry. 87 British and 64 Greek employees in two comparable bakery companies were asked to estimate and evaluate hazards at their workplace. The participants' judgments of 12 hazards—according to 7 risk aspects—were collected and analyzed. Subjective assessment on important occupational hazards included handling heavy loads, repetitiveness, high temperatures, high rate of work, stressful deadlines, and noise. Although limited in the population involved, our findings revealed strong cross-national differences in employee risk perception of specific groups of hazards in the bakery industry. Additional interviews revealed evidence that Greek employees' risk perception depends mostly on work experience while British employees were aware of risks due to company health and safety policy, recognizing that safety is the responsibility of both the management and the worker. Cross-national (cultural) factors that influence workforce risk perception and attitudes towards safety have to be taken into account by technical experts and policy makers in the designing of prevention strategies and risk communication. PMID:20041018

Comprehensive Analysis of Drought Persistence, Hazard, and Recovery across the CONUS

NASA Astrophysics Data System (ADS)

Zarekarizi, M.; Ahmadi, B.; Moradkhani, H.

2017-12-01

Drought is a creeping intertwined natural hazard affecting society more than any other natural disaster and causing enormous damages on economy and ecosystems. Better understanding of potential drought hazard can help water managers and stakeholders devising mitigation plans to minimize the adverse effects of droughts. In this study, soil moisture, simulated by the Variable Infiltration Capacity (VIC) land surface model, is used to analyze the probability of agricultural drought with different severities across the CONUS. Due to the persistence of soil moisture, a drought episode at a particular time is affected by its earlier status; therefore, this study has utilized a Copula function to model the selected hydrologic variable over the time. The probability of drought intensity for each unit is presented spatially. If the unit remains in the drought condition at the same or lower intensity, drought persists and if it improves above a pre-defined threshold, the unit recovers. Results show that the west of US is more vulnerable to drought persistence in summer and spring while the Midwest and Northeast of US are experiencing drought persistence in fall and winter. In addition, the analysis reveals that as the intensity of drought in a given season decreases the following season has higher chance of recovery.

KSC-2014-4522

NASA Image and Video Library

2014-11-19

CAPE CANAVERAL, Fla. –NASA's Project Morpheus prototype lander is lifted by a crane in preparation for a tethered-flight test at the north end of the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida. For the 40-second test, the lander will be hoisted 20 feet. The spacecraft will ascend an additional five feet and hover for five seconds. Morpheus then will perform a 5.6-foot ascent coupled with a 9.8-foot traverse, and hover for five more seconds before returning to the launch point. A number of changes have been made, primarily focused on autonomous landing and hazard avoidance technology ALHAT and moving the Doppler Lidar to the front of the forward liquid oxygen tank. The tether test was cut short due to Morpheus exceeding onboard abort rate limits. The vehicle was taken back to the hangar and data from the test is being studied. After review, managers will determine when a new test date will be set. The landing facility provides the lander with the kind of field necessary for realistic testing, complete with rocks, craters and hazards to avoid. Morpheus’ ALHAT payload allows it to navigate to clear landing sites amidst rocks, craters and other hazards during its descent. For more information on Project Morpheus, visit http://morpheuslander.jsc.nasa.gov/. Photo credit: NASA/Kim Shiflett

KSC-2014-4520

NASA Image and Video Library

2014-11-19

CAPE CANAVERAL, Fla. –NASA's Project Morpheus prototype lander undergoes final preparations for a tethered-flight test at the north end of the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida. For the 40-second test, the lander will be hoisted 20 feet. The spacecraft will ascend an additional five feet and hover for five seconds. Morpheus then will perform a 5.6-foot ascent coupled with a 9.8-foot traverse, and hover for five more seconds before returning to the launch point. A number of changes have been made, primarily focused on autonomous landing and hazard avoidance technology ALHAT and moving the Doppler Lidar to the front of the forward liquid oxygen tank. The tether test was cut short due to Morpheus exceeding onboard abort rate limits. The vehicle was taken back to the hangar and data from the test is being studied. After review, managers will determine when a new test date will be set. The landing facility provides the lander with the kind of field necessary for realistic testing, complete with rocks, craters and hazards to avoid. Morpheus’ ALHAT payload allows it to navigate to clear landing sites amidst rocks, craters and other hazards during its descent. For more information on Project Morpheus, visit http://morpheuslander.jsc.nasa.gov/. Photo credit: NASA/Kim Shiflett

KSC-2014-4521

NASA Image and Video Library

2014-11-19

CAPE CANAVERAL, Fla. –NASA's Project Morpheus prototype lander is prepared for lifting by a crane in preparation for a tethered-flight test at the north end of the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida. For the 40-second test, the lander will be hoisted 20 feet. The spacecraft will ascend an additional five feet and hover for five seconds. Morpheus then will perform a 5.6-foot ascent coupled with a 9.8-foot traverse, and hover for five more seconds before returning to the launch point. A number of changes have been made, primarily focused on autonomous landing and hazard avoidance technology ALHAT and moving the Doppler Lidar to the front of the forward liquid oxygen tank. The tether test was cut short due to Morpheus exceeding onboard abort rate limits. The vehicle was taken back to the hangar and data from the test is being studied. After review, managers will determine when a new test date will be set. The landing facility provides the lander with the kind of field necessary for realistic testing, complete with rocks, craters and hazards to avoid. Morpheus’ ALHAT payload allows it to navigate to clear landing sites amidst rocks, craters and other hazards during its descent. For more information on Project Morpheus, visit http://morpheuslander.jsc.nasa.gov/. Photo credit: NASA/Kim Shiflett

Phthalates impact human health: Epidemiological evidences and plausible mechanism of action.

PubMed

Benjamin, Sailas; Masai, Eiji; Kamimura, Naofumi; Takahashi, Kenji; Anderson, Robin C; Faisal, Panichikkal Abdul

2017-10-15

Disregarding the rising alarm on the hazardous nature of various phthalates and their metabolites, ruthless usage of phthalates as plasticizer in plastics and as additives in innumerable consumer products continues due low their cost, attractive properties, and lack of suitable alternatives. Globally, in silico computational, in vitro mechanistic, in vivo preclinical and limited clinical or epidemiological human studies showed that over a dozen phthalates and their metabolites ingested passively by man from the general environment, foods, drinks, breathing air, and routine household products cause various dysfunctions. Thus, this review addresses the health hazards posed by phthalates on children and adolescents, epigenetic modulation, reproductive toxicity in women and men; insulin resistance and type II diabetes; overweight and obesity, skeletal anomalies, allergy and asthma, cancer, etc., coupled with the description of major phthalates and their general uses, phthalate exposure routes, biomonitoring and risk assessment, special account on endocrine disruption; and finally, a plausible molecular cross-talk with a unique mechanism of action. This clinically focused comprehensive review on the hazards of phthalates would benefit the general population, academia, scientists, clinicians, environmentalists, and law or policy makers to decide upon whether usage of phthalates to be continued swiftly without sufficient deceleration or regulated by law or to be phased out from earth forever. Copyright © 2017. Published by Elsevier B.V.

Causal Mediation Analysis of Survival Outcome with Multiple Mediators.

PubMed

Huang, Yen-Tsung; Yang, Hwai-I

2017-05-01

Mediation analyses have been a popular approach to investigate the effect of an exposure on an outcome through a mediator. Mediation models with multiple mediators have been proposed for continuous and dichotomous outcomes. However, development of multimediator models for survival outcomes is still limited. We present methods for multimediator analyses using three survival models: Aalen additive hazard models, Cox proportional hazard models, and semiparametric probit models. Effects through mediators can be characterized by path-specific effects, for which definitions and identifiability assumptions are provided. We derive closed-form expressions for path-specific effects for the three models, which are intuitively interpreted using a causal diagram. Mediation analyses using Cox models under the rare-outcome assumption and Aalen additive hazard models consider effects on log hazard ratio and hazard difference, respectively; analyses using semiparametric probit models consider effects on difference in transformed survival time and survival probability. The three models were applied to a hepatitis study where we investigated effects of hepatitis C on liver cancer incidence mediated through baseline and/or follow-up hepatitis B viral load. The three methods show consistent results on respective effect scales, which suggest an adverse estimated effect of hepatitis C on liver cancer not mediated through hepatitis B, and a protective estimated effect mediated through the baseline (and possibly follow-up) of hepatitis B viral load. Causal mediation analyses of survival outcome with multiple mediators are developed for additive hazard and proportional hazard and probit models with utility demonstrated in a hepatitis study.

Hazardous material releases due to unsecured openings and lining failures, volume 1.

DOT National Transportation Integrated Search

1990-12-01

In response to the large number of unintentional releases of hazardous : materials from railroad tank cars for which accidents were not the cause, the : Federal Railroad Administration (FRA) initiated this study to (1) recommend : procedures to ensur...

A modeling framework for investment planning in interdependent infrastructures in multi-hazard environments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nathanael J. K.; Gearhart, Jared Lee; Jones, Dean A.

Currently, much of protection planning is conducted separately for each infrastructure and hazard. Limited funding requires a balance of expenditures between terrorism and natural hazards based on potential impacts. This report documents the results of a Laboratory Directed Research & Development (LDRD) project that created a modeling framework for investment planning in interdependent infrastructures focused on multiple hazards, including terrorism. To develop this framework, three modeling elements were integrated: natural hazards, terrorism, and interdependent infrastructures. For natural hazards, a methodology was created for specifying events consistent with regional hazards. For terrorism, we modeled the terrorists actions based on assumptions regardingmore » their knowledge, goals, and target identification strategy. For infrastructures, we focused on predicting post-event performance due to specific terrorist attacks and natural hazard events, tempered by appropriate infrastructure investments. We demonstrate the utility of this framework with various examples, including protection of electric power, roadway, and hospital networks.« less

EU landfill waste acceptance criteria and EU Hazardous Waste Directive compliance testing of incinerated sewage sludge ash.

PubMed

Donatello, S; Tyrer, M; Cheeseman, C R

2010-01-01

A hazardous waste assessment has been completed on ash samples obtained from seven sewage sludge incinerators operating in the UK, using the methods recommended in the EU Hazardous Waste Directive. Using these methods, the assumed speciation of zinc (Zn) ultimately determines if the samples are hazardous due to ecotoxicity hazard. Leaching test results showed that two of the seven sewage sludge ash samples would require disposal in a hazardous waste landfill because they exceed EU landfill waste acceptance criteria for stabilised non-reactive hazardous waste cells for soluble selenium (Se). Because Zn cannot be proven to exist predominantly as a phosphate or oxide in the ashes, it is recommended they be considered as non-hazardous waste. However leaching test results demonstrate that these ashes cannot be considered as inert waste, and this has significant implications for the management, disposal and re-use of sewage sludge ash.

SOCIAL AND NON-SOCIAL HAZARD RESPONSE IN DRIVERS WITH AUTISM SPECTRUM DISORDER

PubMed Central

Bishop, Haley Johnson; Biasini, Fred J.; Stavrinos, Despina

2017-01-01

Driving is a complex task that relies on manual, cognitive, visual and social skill. The social demands of driving may be challenging for individuals with Autism Spectrum Disorder (ASD) due to known social impairments. This study investigated how drivers with ASD respond to social (e.g., pedestrians) and non-social (e.g., vehicles) hazards in a driving simulator compared to typically developing drivers. Overall, participants responded faster to social hazards than non-social hazards. It was also found that drivers with typical development reacted faster to social hazards, while drivers with ASD showed no difference in reaction time to social versus non-social hazards. Future work should further investigate how social impairments in ASD may affect driving safety. PMID:28070791

Development Of An Open System For Integration Of Heterogeneous Models For Flood Forecasting And Hazard Mitigation

NASA Astrophysics Data System (ADS)

Chang, W.; Tsai, W.; Lin, F.; Lin, S.; Lien, H.; Chung, T.; Huang, L.; Lee, K.; Chang, C.

2008-12-01

During a typhoon or a heavy storm event, using various forecasting models to predict rainfall intensity, and water level variation in rivers and flood situation in the urban area is able to reveal its capability technically. However, in practice, the following two causes tend to restrain the further application of these models as a decision support system (DSS) for the hazard mitigation. The first one is due to the difficulty of integration of heterogeneous models. One has to take into consideration the different using format of models, such as input files, output files, computational requirements, and so on. The second one is that the development of DSS requires, due to the heterogeneity of models and systems, a friendly user interface or platform to hide the complexity of various tools from users. It is expected that users can be governmental officials rather than professional experts, therefore the complicated interface of DSS is not acceptable. Based on the above considerations, in the present study, we develop an open system for integration of several simulation models for flood forecasting by adopting the FEWS (Flood Early Warning System) platform developed by WL | Delft Hydraulics. It allows us to link heterogeneous models effectively and provides suitable display modules. In addition, FEWS also has been adopted by Water Resource Agency (WRA), Taiwan as the standard operational system for river flooding management. That means this work can be much easily integrated with the use of practical cases. In the present study, based on FEWS platform, the basin rainfall-runoff model, SOBEK channel-routing model, and estuary tide forecasting model are linked and integrated through the physical connection of model initial and boundary definitions. The work flow of the integrated processes of models is shown in Fig. 1. This differs from the typical single model linking used in FEWS, which only aims at data exchange but without much physical consideration. So it really makes the tighter collaboration work among these hydrological models. In addition, in order to make communication between system users and decision makers efficient and effective, a real-time and multi-user communication platform, designated as Co-life, is incorporated in the present study. Through its application sharing function, the flood forecasting results can be displayed for all attendees situated at different locations to help the processes of decision making for hazard mitigation. Fig. 2 shows the cyber-conference of WRA officials with the Co-life system for hazard mitigation during the typhoon event.

[Review from the scientific paper about the main respiratory diseases in metallurgical workers].

PubMed

Apostoli, P; Catalani, S; Cortesi, I

2012-01-01

The review of main scientific investigations about the work related diseases in metallurgy shows that the most studied pathologies regards lung cancer and pneumoconiosis, other cancers and cardiovascular diseases. These evidences are not univocal and have been and are critically evaluated due to the complexity and articulated structure of metals production which makes it very difficult to compare the risks and diseases among the different metallurgical activities and, in the same activity, among the different job tasks. In addition, due to the technological and organizational evolution investigations, appear to be necessary to better define the specific hazards (for example metal species, PAH and PoPs mixtures) and to put into a correct relation these and pathologies diagnosed by health surveillance procedures or epidemiological surveys, surely different from those of past decades.

Chemical stabilization of air pollution control residues from municipal solid waste incineration.

PubMed

Quina, Margarida J; Bordado, João C M; Quinta-Ferreira, Rosa M

2010-07-15

The by-products of the municipal solid waste incineration (MSWI) generally contain hazardous pollutants, with particular relevance to air pollution control (APC) residues. This waste may be harmful to health and detrimental to the environmental condition, mainly due to soluble salts, toxic heavy metals and trace organic compounds. Solidification/stabilization (S/S) with binders is a common industrial technology for treating such residues, involving however, a significant increase in the final mass that is landfilled. In our work, the chemical stabilization of APC residues by using NaHS x xH(2)O, H(3)PO(4), Na(2)CO(3), C(5)H(10)NNaS(2) x 3 H(2)O, Na(2)O x SiO(2) was investigated, and it was possible to conclude that all these additives lead to an improvement of the stabilization process of the most problematic heavy metals. Indeed, compliance leaching tests showed that after the stabilization treatment the waste becomes non-hazardous with respect to heavy metals. Chromium revealed to be a problematic metal, mainly when H(3)PO(4), Na(2)CO(3) and Na(2)O x SiO(2) were used for stabilization. Nevertheless, soluble phosphates are the most efficient additives for stabilizing the overall metals. The effect of the additives tested on the elements associated with soluble salts (K, Na, Cl(-)) is almost negligible, and therefore, the soluble fraction is hardly reduced without further treatment, such as pre-washing. 2010 Elsevier B.V. All rights reserved.

DIDO Optimization of a Lunar Landing Trajectory with Respect to Autonomous Landing Hazard Avoidance Technology

DTIC Science & Technology

2009-09-01

22 b. Hazard Detection and Avoidance ( HDA )...............................22 c. Hazard Relative Navigation (HRN...Navigation (HRN) and Hazard Detection and Avoidance ( HDA ). In addition to the TRN and HDA sensors used during these phases, which will be discussed...and Avoidance ( HDA ) During the HAD phase, the expected landing site is examined and evaluated, and a new site may be selected. Using the HDA

Understanding and managing the movements of hazardous material shipments through Texas population centers.

DOT National Transportation Integrated Search

2009-08-01

Every day almost a million shipments of hazardous materials move safely and securely along our nations transportation system, via any combination of modes. Only a small fraction of total shipments interrupt their planned journey due to an incident...

40 CFR 260.22 - Petitions to amend part 261 to exclude a waste produced at a particular facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Administrator must determine, where he has a reasonable basis to believe that factors (including additional..., that such factors do not warrant retaining the waste as a hazardous waste. A waste which is so excluded... for factors (including additional constituents) that could cause the waste mixture to be a hazardous...

A Model for Generating Multi-hazard Scenarios

NASA Astrophysics Data System (ADS)

Lo Jacomo, A.; Han, D.; Champneys, A.

2017-12-01

Communities in mountain areas are often subject to risk from multiple hazards, such as earthquakes, landslides, and floods. Each hazard has its own different rate of onset, duration, and return period. Multiple hazards tend to complicate the combined risk due to their interactions. Prioritising interventions for minimising risk in this context is challenging. We developed a probabilistic multi-hazard model to help inform decision making in multi-hazard areas. The model is applied to a case study region in the Sichuan province in China, using information from satellite imagery and in-situ data. The model is not intended as a predictive model, but rather as a tool which takes stakeholder input and can be used to explore plausible hazard scenarios over time. By using a Monte Carlo framework and varrying uncertain parameters for each of the hazards, the model can be used to explore the effect of different mitigation interventions aimed at reducing the disaster risk within an uncertain hazard context.

Multi-scale landslide hazard assessment: Advances in global and regional methodologies

NASA Astrophysics Data System (ADS)

Kirschbaum, Dalia; Peters-Lidard, Christa; Adler, Robert; Hong, Yang

2010-05-01

The increasing availability of remotely sensed surface data and precipitation provides a unique opportunity to explore how smaller-scale landslide susceptibility and hazard assessment methodologies may be applicable at larger spatial scales. This research first considers an emerging satellite-based global algorithm framework, which evaluates how the landslide susceptibility and satellite derived rainfall estimates can forecast potential landslide conditions. An analysis of this algorithm using a newly developed global landslide inventory catalog suggests that forecasting errors are geographically variable due to improper weighting of surface observables, resolution of the current susceptibility map, and limitations in the availability of landslide inventory data. These methodological and data limitation issues can be more thoroughly assessed at the regional level, where available higher resolution landslide inventories can be applied to empirically derive relationships between surface variables and landslide occurrence. The regional empirical model shows improvement over the global framework in advancing near real-time landslide forecasting efforts; however, there are many uncertainties and assumptions surrounding such a methodology that decreases the functionality and utility of this system. This research seeks to improve upon this initial concept by exploring the potential opportunities and methodological structure needed to advance larger-scale landslide hazard forecasting and make it more of an operational reality. Sensitivity analysis of the surface and rainfall parameters in the preliminary algorithm indicates that surface data resolution and the interdependency of variables must be more appropriately quantified at local and regional scales. Additionally, integrating available surface parameters must be approached in a more theoretical, physically-based manner to better represent the physical processes underlying slope instability and landslide initiation. Several rainfall infiltration and hydrological flow models have been developed to model slope instability at small spatial scales. This research investigates the potential of applying a more quantitative hydrological model to larger spatial scales, utilizing satellite and surface data inputs that are obtainable over different geographic regions. Due to the significant role that data and methodological uncertainties play in the effectiveness of landslide hazard assessment outputs, the methodology and data inputs are considered within an ensemble uncertainty framework in order to better resolve the contribution and limitations of model inputs and to more effectively communicate the model skill for improved landslide hazard assessment.

Potential environmental impacts from the metals in incandescent, compact fluorescent lamp (CFL), and light-emitting diode (LED) bulbs.

PubMed

Lim, Seong-Rin; Kang, Daniel; Ogunseitan, Oladele A; Schoenung, Julie M

2013-01-15

Artificial lighting systems are transitioning from incandescent to compact fluorescent lamp (CFL) and light-emitting diode (LED) bulbs in response to the U.S. Energy Independence and Security Act and the EU Ecodesign Directive, which leads to energy savings and reduced greenhouse gas emissions. Although CFLs and LEDs are more energy-efficient than incandescent bulbs, they require more metal-containing components. There is uncertainty about the potential environmental impacts of these components and whether special provisions must be made for their disposal at the end of useful life. Therefore, the objective of this study is to analyze the resource depletion and toxicity potentials from the metals in incandescent, CFL, and LED bulbs to complement the development of sustainable energy policy. We assessed the potentials by examining whether the lighting products are to be categorized as hazardous waste under existing U.S. federal and California state regulations and by applying life cycle impact-based and hazard-based assessment methods (note that "life cycle impact-based method" does not mean a general life cycle assessment (LCA) but rather the elements in LCA used to quantify toxicity potentials). We discovered that both CFL and LED bulbs are categorized as hazardous, due to excessive levels of lead (Pb) leachability (132 and 44 mg/L, respectively; regulatory limit: 5) and the high contents of copper (111,000 and 31,600 mg/kg, respectively; limit: 2500), lead (3860 mg/kg for the CFL bulb; limit: 1000), and zinc (34,500 mg/kg for the CFL bulb; limit: 5000), while the incandescent bulb is not hazardous (note that the results for CFL bulbs excluded mercury vapor not captured during sample preparation). The CFLs and LEDs have higher resource depletion and toxicity potentials than the incandescent bulb due primarily to their high aluminum, copper, gold, lead, silver, and zinc. Comparing the bulbs on an equivalent quantity basis with respect to the expected lifetimes of the bulbs, the CFLs and LEDs have 3-26 and 2-3 times higher potential impacts than the incandescent bulb, respectively. We conclude that in addition to enhancing energy efficiency, conservation and sustainability policies should focus on the development of technologies that reduce the content of hazardous and rare metals in lighting products without compromising their performance and useful lifespan.

Enhanced control and sensing for the REMOTEC ANDROS Mk VI robot. CRADA final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spelt, P.F.; Harvey, H.W.

1998-08-01

This Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot`s performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mkmore » VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory`s Center for Engineering Systems Advanced Research (CESAR, B&R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding.« less

Airmen with mild traumatic brain injury (mTBI) at increased risk for subsequent mishaps.

PubMed

Whitehead, Casserly R; Webb, Timothy S; Wells, Timothy S; Hunter, Kari L

2014-02-01

Little is known regarding long-term performance decrements associated with mild Traumatic Brain Injury (mTBI). The goal of this study was to determine if individuals with an mTBI may be at increased risk for subsequent mishaps. Cox proportional hazards modeling was utilized to calculate hazard ratios for 518,958 active duty U.S. Air Force service members (Airmen) while controlling for varying lengths of follow-up and potentially confounding variables. Two non-mTBI comparison groups were used; the second being a subset of the original, both without head injuries two years prior to study entrance. Hazard ratios indicate that the causes of increased risk associated with mTBI do not resolve quickly. Additionally, outpatient mTBI injuries do not differ from other outpatient bodily injuries in terms of subsequent injury risk. These findings suggest that increased risk for subsequent mishaps are likely due to differences shared among individuals with any type of injury, including risk-taking behaviors, occupations, and differential participation in sports activities. Therefore, individuals who sustain an mTBI or injury have a long-term risk of additional mishaps. Differences shared among those who seek medical care for injuries may include risk-taking behaviors (Cherpitel, 1999; Turner & McClure, 2004; Turner, McClure, & Pirozzo, 2004), occupations, and differential participation in sports activities, among others. Individuals with an mTBI should be educated that they are at risk for subsequent injury. Historical data supported no lingering effects of mTBI, but more recent data suggest longer lasting effects. This study further adds that one of the longer term sequelae of mTBI may be an increased risk for subsequent mishap. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

40 CFR 721.4280 - Substituted hydrazine.

Code of Federal Regulations, 2010 CFR

2010-07-01

...). (ii) Hazard communication program. Requirements as specified in § 721.72 (a), (b), (c), (d), (e...)(5). In addition, the human health hazard statement shall include mutagenicity. (iii) Industrial...

Unnecessary Chemicals

ERIC Educational Resources Information Center

Johnson, Anita

1978-01-01

Discusses the health hazards resulting from chemical additions of many common products such as cough syrups, food dyes, and cosmetics. Steps being taken to protect consumers from these health hazards are included. (MDR)

Hazardous waste management in the Pacific basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cirillo, R.R.; Chiu, S.; Chun, K.C.

1994-11-01

Hazardous waste control activities in Asia and the Pacific have been reviewed. The review includes China (mainland, Hong Kong, and Taiwan), Indonesia, Korea, Malaysia, Papua New Guinea, the Philippines, Singapore, and Thailand. It covers the sources of hazardous waste, the government structure for dealing with hazardous waste, and current hazardous waste control activities in each country. In addition, the hazardous waste program activities of US government agencies, US private-sector organizations, and international organizations are reviewed. The objective of these reviews is to provide a comprehensive picture of the current hazardous waste problems and the waste management approaches being used tomore » address them so that new program activities can be designed more efficiently.« less

Decreased pain sensitivity due to trimethylbenzene exposure: case study on quantitative approaches for hazard identification

EPA Science Inventory

Traditionally, human health risk assessments have relied on qualitative approaches for hazard identification, often using the Hill criteria and weight of evidence determinations to integrate data from multiple studies. Recently, the National Research Council has recommended the ...

Measuring Environmental Health Perception among College Students

ERIC Educational Resources Information Center

Ratnapradipa, Dhitinut; Brown, Stephen L.; Middleton, Wendi K.; Wodika, Alicia B.

2011-01-01

One's knowledge, perception, and attitude are fundamental in determining how one behaves regarding environmental hazards. While science has made great strides in promoting environmental health, threats still exist, largely due to individual actions in response to potential health hazards. Undergraduate students (n = 395) enrolled in an…

Fuels planning: science synthesis and integration; social issues fact sheet 04: Three critical topics to cover when talking about hazards

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

The amount of science applicable to the management of wildfire hazards is increasing daily. In addition, the attitudes of landowners and policymakers about fire and fuels management are changing. This fact sheet discusses three critical keys to communicating about wildfire hazards.

Insights into earthquake hazard map performance from shaking history simulations

NASA Astrophysics Data System (ADS)

Stein, S.; Vanneste, K.; Camelbeeck, T.; Vleminckx, B.

2017-12-01

Why recent large earthquakes caused shaking stronger than predicted by earthquake hazard maps is under debate. This issue has two parts. Verification involves how well maps implement probabilistic seismic hazard analysis (PSHA) ("have we built the map right?"). Validation asks how well maps forecast shaking ("have we built the right map?"). We explore how well a map can ideally perform by simulating an area's shaking history and comparing "observed" shaking to that predicted by a map generated for the same parameters. The simulations yield shaking distributions whose mean is consistent with the map, but individual shaking histories show large scatter. Infrequent large earthquakes cause shaking much stronger than mapped, as observed. Hence, PSHA seems internally consistent and can be regarded as verified. Validation is harder because an earthquake history can yield shaking higher or lower than that predicted while being consistent with the hazard map. The scatter decreases for longer observation times because the largest earthquakes and resulting shaking are increasingly likely to have occurred. For the same reason, scatter is much less for the more active plate boundary than for a continental interior. For a continental interior, where the mapped hazard is low, even an M4 event produces exceedances at some sites. Larger earthquakes produce exceedances at more sites. Thus many exceedances result from small earthquakes, but infrequent large ones may cause very large exceedances. However, for a plate boundary, an M6 event produces exceedance at only a few sites, and an M7 produces them in a larger, but still relatively small, portion of the study area. As reality gives only one history, and a real map involves assumptions about more complicated source geometries and occurrence rates, which are unlikely to be exactly correct and thus will contribute additional scatter, it is hard to assess whether misfit between actual shaking and a map — notably higher-than-mapped shaking — arises by chance or reflects biases in the map. Due to this problem, there are limits to how well we can expect hazard maps to predict future shaking, as well as to our ability to test the performance of a hazard map based on available observations.

Public-private provision of protection measures against natural hazards

NASA Astrophysics Data System (ADS)

Gruber, M.

2009-04-01

Natural hazards threaten human lives as well as economic values of a society. Due to an increasing population density, augmenting property holdings in congested areas as well as higher frequencies of catastrophic events, the damage potential associated with natural hazards is growing. In order to safeguard societal assets against this threat, active and passive protection measures can be established. While passive protection measures provide for this type of risk by means of thorough land use planning, active protection measures aim at improving safety through technical or biological protective systems and structures. However, these provisions are costly and need to be handled prudentially. In most European countries protection measures against natural hazards are provided by the public. Specific governmental funds have been set up for the establishment of preventive systems as well as for damage compensation payments after the occurrence of catastrophic events. Though, additional capital is urgently needed in order to facilitate the realisation of all necessary projects in this field and to provide for maximal safety. One potential solution for such financial deficiencies can be found in Public Private Partnerships (PPP). PPPs have been implemented as attractive concepts for the funding of diverse projects in the fields of e.g. road construction, municipal, health and social services. In principle, they could also provide alternative funding solutions for the establishment of crucial protective infrastructure in respect of natural hazards, adding private financial means to the currently available public funds. Thereby, the entire capacities for catastrophe funding could be enhanced. Beside PPPs, also alternative funding mechanisms such as the emission of catastrophe bonds, contingent credit lines or leasing arrangements may enhance available capacities for the financing of protection measures. This contribution discusses innovative solutions for the funding of protection measures against natural hazards along with potential positive and negative implications. In particular, the suitability of various forms of Public Private Partnerships will be considered, as several issues need to be declared in order to render such partnerships successful and to avoid undesirable drawbacks. Finally, the author intends to suggest appropriate alternatives to the current system of (almost) exclusive public funding of protection measures against natural hazards.

75 FR 14243 - Pipeline Safety: Girth Weld Quality Issues Due to Improper Transitioning, Misalignment, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No..., and Welding Practices of Large Diameter Line Pipe AGENCY: Pipeline and Hazardous Materials Safety... bulletin to notify owners and operators of recently constructed large diameter natural gas pipeline and...

When air really matters: Flow depth relationships for stepped spillways

USDA-ARS?s Scientific Manuscript database

With changing demographics in the vicinity of aging embankment dams, hazard creep, a change in classification from low to significant or high, can become problematic and limit rehabilitation options. The most common deficiency for embankment dams due to hazard creep is inadequate spillway capacity....

Mapping Natech risk due to earthquakes using RAPID-N

NASA Astrophysics Data System (ADS)

Girgin, Serkan; Krausmann, Elisabeth

2013-04-01

Natural hazard-triggered technological accidents (so-called Natech accidents) at hazardous installations are an emerging risk with possibly serious consequences due to the potential for release of hazardous materials, fires or explosions. For the reduction of Natech risk, one of the highest priority needs is the identification of Natech-prone areas and the systematic assessment of Natech risks. With hardly any Natech risk maps existing within the EU the European Commission's Joint Research Centre has developed a Natech risk analysis and mapping tool called RAPID-N, that estimates the overall risk of natural-hazard impact to industrial installations and its possible consequences. The results are presented as risk summary reports and interactive risk maps which can be used for decision making. Currently, RAPID-N focuses on Natech risk due to earthquakes at industrial installations. However, it will be extended to also analyse and map Natech risk due to floods in the near future. The RAPID-N methodology is based on the estimation of on-site natural hazard parameters, use of fragility curves to determine damage probabilities of plant units for various damage states, and the calculation of spatial extent, severity, and probability of Natech events potentially triggered by the natural hazard. The methodology was implemented as a web-based risk assessment and mapping software tool which allows easy data entry, rapid local or regional risk assessment and mapping. RAPID-N features an innovative property estimation framework to calculate on-site natural hazard parameters, industrial plant and plant unit characteristics, and hazardous substance properties. Custom damage states and fragility curves can be defined for different types of plant units. Conditional relationships can be specified between damage states and Natech risk states, which describe probable Natech event scenarios. Natech consequences are assessed using a custom implementation of U.S. EPA's Risk Management Program (RMP) Guidance for Offsite Consequence Analysis methodology. This custom implementation is based on the property estimation framework and allows the easy modification of model parameters and the substitution of equations with alternatives. RAPID-N can be applied at different stages of the Natech risk management process: It allows on the one hand the analysis of hypothetical Natech scenarios to prevent or prepare for a Natech accident by supporting land-use and emergency planning. On the other hand, once a natural disaster occurs RAPID-N can be used for rapidly locating facilities with potential Natech accident damage based on actual natural-hazard information. This provides a means to warn the population in the vicinity of the facilities in a timely manner. This presentation will introduce the specific features of RAPID-N and show the use of the tool by application to a case-study area.

National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines

EPA Pesticide Factsheets

This page contains the current National Emission Standards for Hazardous Air Pollutants (NESHAP) for Reciprocating Internal Combustion Engines and additional information regarding rule compliance and implementation.

Pharmaceuticals Production Industry: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

National emission standards for hazardous air pollutants (NESHAP) from facilities that manufacture pharmaceutical products. Includes rule history, Federal Register citations, implementation and compliance information, and additional resources.

Hazardous Alcohol Use in 2 Countries: A Comparison Between Alberta, Canada and Queensland, Australia

PubMed Central

Voaklander, Donald

2017-01-01

Objectives This article aimed to compare alcohol consumption between the populations of Queensland in Australia and Alberta in Canada. Furthermore, the associations between greater alcohol consumption and socio-demographic characteristics were explored in each population. Methods Data from 2500 participants of the 2013 Alberta Survey and the 2013 Queensland Social Survey were analyzed. Regression analyses were used to explore the associations between alcohol risk and socio-demographic characteristics. Results A higher rate of hazardous alcohol use was found in Queenslanders than in Albertans. In both Albertans and Queenslanders, hazardous alcohol use was associated with being between 18 and 24 years of age. Higher income, having no religion, living alone, and being born in Canada were also associated with alcohol risk in Albertans; while in Queenslanders, hazardous alcohol use was also associated with common-law marital status. In addition, hazardous alcohol use was lower among respondents with a non-Catholic or Protestant religious affiliation. Conclusions Younger age was associated with greater hazardous alcohol use in both populations. In addition, different socio-demographic factors were associated with hazardous alcohol use in each of the populations studied. Our results allowed us to identify the socio-demographic profiles associated with hazardous alcohol use in Alberta and Queensland. These profiles constitute valuable sources of information for local health authorities and policymakers when designing suitable preventive strategies targeting hazardous alcohol use. Overall, the present study highlights the importance of analyzing the socio-demographic factors associated with alcohol consumption in population-specific contexts. PMID:29020759

Three consecutive years of road closures due to natural hazards in the Weisstannen valley, Canton of St-Gallen, Switzerland

NASA Astrophysics Data System (ADS)

Voumard, Jérémie; Derron, Marc-Henri; Jaboyedoff, Michel

2017-04-01

The Weisstannen small alpine valley located in the Canton of St-Gallen, Switzerland, has been affected by four different natural hazards these three last years. Its unique access road has been cut off height times during this period: by an earth slide in January 2014, by three debris flows in August 2015, by one debris flow in September 2016, by two floods in June and July 2016 and by a rockfall in May 2016. Although the valley is sparsely populated, 240 people have been affected by the height road closures due to these events. In addition to road damages, several buildings, of which a restaurant (with EUR 190'000 damages) and an animal shelter, have been damaged. In Switzerland, some roads of 15 communes have been affected by natural hazards at least three times in five years (2012-2016). Then the Weisstannen valley is not an exception at the communal level. However, it is the only valley whose unique access was cut off three consecutive years. With these repeated events, the population of the valley does not understand how possible it is to end up in such a situation in a country accustomed to natural hazards. In the media and social media, people do not hide their irritation regarding to this situation: "Have the authorities failed to take into account natural dangers despite of the 4.7 million Euro allocated for a flood protection project? Who is responsible of those repeated damages? Why the situation did not improve after the events of the first year and then the second year? ". In the present work, we try to shed the light on this peculiar case analysing the causes of road closures, studying meteorological, topographical, hydrological and geological data for each events. The effectiveness of the new protective measures built between the events are assessed, as the future planned protectives measures. Road closures consequences on the population and the economy are also estimated. Finally, we estimate the probability of having new road closures in the Weisstannen valley during the next years. Data about the events were documented during field visit, or obtained from the media and official reports.

[Comment on “Meeting the challenges of natural hazards in the wake of the tsunami disaster” by Soroosh Sorooshian] More on the challenges of natural hazards

NASA Astrophysics Data System (ADS)

Pierson, Thomaas C.

In the 11 January 2005 issue of Eos, Soroosh Sorooshian offered cogent suggestions about how we, as professional scientists, might do more to make the world safer from natural hazards. Not explicitly mentioned was an additional important contribution we can make that requires no additional research. It is simply to more effectively apply what is already known by increasing public awareness of both the hazards themselves and the simple, life-saving responses to hazards that people can take without outside warning, direction, or assistance from public officials.For example, school children in many seismic areas are taught to duck immediately under desks or tables during earthquakes (“drop, cover, and hold on”). Similarly, people living in coastal areas along subduction zones can be taught that earthquakes may cause tsunamis and to respond to a felt earthquake by moving as quickly as possible to high ground or to inland areas and remaining there for a few hours.

Geodesy- and geology-based slip-rate models for the Western United States (excluding California) national seismic hazard maps

USGS Publications Warehouse

Petersen, Mark D.; Zeng, Yuehua; Haller, Kathleen M.; McCaffrey, Robert; Hammond, William C.; Bird, Peter; Moschetti, Morgan; Shen, Zhengkang; Bormann, Jayne; Thatcher, Wayne

2014-01-01

The 2014 National Seismic Hazard Maps for the conterminous United States incorporate additional uncertainty in fault slip-rate parameter that controls the earthquake-activity rates than was applied in previous versions of the hazard maps. This additional uncertainty is accounted for by new geodesy- and geology-based slip-rate models for the Western United States. Models that were considered include an updated geologic model based on expert opinion and four combined inversion models informed by both geologic and geodetic input. The two block models considered indicate significantly higher slip rates than the expert opinion and the two fault-based combined inversion models. For the hazard maps, we apply 20 percent weight with equal weighting for the two fault-based models. Off-fault geodetic-based models were not considered in this version of the maps. Resulting changes to the hazard maps are generally less than 0.05 g (acceleration of gravity). Future research will improve the maps and interpret differences between the new models.

Cargo Fire Hazards and Hazard Control for the Offshore Bulk Fuel Systems (OBFS).

DTIC Science & Technology

1980-06-01

used to evaluate the probability of cargo fuel spills during different ship operational modes. An undesired hazardous event such as a spill of volume...occur. if a cargo release occurs due to either collision or hostile action the probability of ignition is very high . Ignition can be caused by the...Separate auxiliary burners independent from the ship propulsion system provide similar flue gas composition. However as noted previously, a low sulfur

Cost Benefit Analysis: Closed-Cell Polyurethane Foam Use in DOD Forward-Deployed Structures and As An Alternative Building Material to Reduce Operational Fuel Demand and Associated Costs

DTIC Science & Technology

2015-06-01

23 6. Disposal ...............................................................................................23 7. Health Hazards ...component spray foams, to as much as 8 to 24 hours for OCSF or CCSF. Due to the significant health hazards , the EPA stresses to err on the side of... Hazards and Concerns The EPA has indicated that there are serious health risks associated with the airborne aerosols, mists, and vapors that result

75 FR 9647 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

...EPA is promulgating national emission standards for hazardous air pollutants for existing stationary compression ignition reciprocating internal combustion engines that either are located at area sources of hazardous air pollutant emissions or that have a site rating of less than or equal to 500 brake horsepower and are located at major sources of hazardous air pollutant emissions. In addition, EPA is promulgating national emission standards for hazardous air pollutants for existing non-emergency stationary compression ignition engines greater than 500 brake horsepower that are located at major sources of hazardous air pollutant emissions. Finally, EPA is revising the provisions related to startup, shutdown, and malfunction for the engines that were regulated previously by these national emission standards for hazardous air pollutants.

30 CFR 19.8 - Protection against bodily hazard.

Code of Federal Regulations, 2013 CFR

2013-07-01

... hazard is chiefly due to the possible burning of the wearer by electrolyte spilled from the battery. MSHA therefore requires that: (a) Spilling of electrolyte. The lamp shall be so designed and constructed that, when properly filled, the battery will neither leak nor spill electrolyte under actual service...

30 CFR 19.8 - Protection against bodily hazard.

Code of Federal Regulations, 2011 CFR

2011-07-01

... hazard is chiefly due to the possible burning of the wearer by electrolyte spilled from the battery. MSHA therefore requires that: (a) Spilling of electrolyte. The lamp shall be so designed and constructed that, when properly filled, the battery will neither leak nor spill electrolyte under actual service...

30 CFR 19.8 - Protection against bodily hazard.

Code of Federal Regulations, 2012 CFR

2012-07-01

... hazard is chiefly due to the possible burning of the wearer by electrolyte spilled from the battery. MSHA therefore requires that: (a) Spilling of electrolyte. The lamp shall be so designed and constructed that, when properly filled, the battery will neither leak nor spill electrolyte under actual service...

30 CFR 19.8 - Protection against bodily hazard.

Code of Federal Regulations, 2014 CFR

2014-07-01

... hazard is chiefly due to the possible burning of the wearer by electrolyte spilled from the battery. MSHA therefore requires that: (a) Spilling of electrolyte. The lamp shall be so designed and constructed that, when properly filled, the battery will neither leak nor spill electrolyte under actual service...

New flow depth relationships for embankment dam stepped spillway design

USDA-ARS?s Scientific Manuscript database

A common deficiency for embankment dams changing from a low hazard to a high hazard dam is inadequate spillway capacity. Roller compacted concrete (RCC) stepped spillways are a popular method to address this issue. Stepped spillway research has gained momentum in recent years due to the need for d...

77 FR 60334 - New Marking Standards for Parcels Containing Hazardous Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... substances, certain patient specimens and certain radioactive materials as noted in section 135 of Mailing... due to its form, quantity, and packaging. Not all hazardous materials permitted to be shipped as a... mailable limited quantity materials that meet USPS quantity limitations and packaging requirements. All...

75 FR 12688 - Safety Zone; Gallants Channel, Beaufort, NC

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... immediate action is needed to ensure the safety of human life and property from the hazards of falling... life and property on navigable waters and due to the hazards associated with potential falling debris... which do not individually or cumulatively have a significant effect on the human environment. This rule...

Seismic hazard maps of Mexico, the Caribbean, and Central and South America

USGS Publications Warehouse

Tanner, J.G.; Shedlock, K.M.

2004-01-01

The growth of megacities in seismically active regions around the world often includes the construction of seismically unsafe buildings and infrastructures due to an insufficient knowledge of existing seismic hazard and/or economic constraints. Minimization of the loss of life, property damage, and social and economic disruption due to earthquakes depends on reliable estimates of seismic hazard. We have produced a suite of seismic hazard estimates for Mexico, the Caribbean, and Central and South America. One of the preliminary maps in this suite served as the basis for the Caribbean and Central and South America portion of the Global Seismic Hazard Map (GSHM) published in 1999, which depicted peak ground acceleration (pga) with a 10% chance of exceedance in 50 years for rock sites. Herein we present maps depicting pga and 0.2 and 1.0 s spectral accelerations (SA) with 50%, 10%, and 2% chances of exceedance in 50 years for rock sites. The seismicity catalog used in the generation of these maps adds 3 more years of data to those used to calculate the GSH Map. Different attenuation functions (consistent with those used to calculate the U.S. and Canadian maps) were used as well. These nine maps are designed to assist in global risk mitigation by providing a general seismic hazard framework and serving as a resource for any national or regional agency to help focus further detailed studies required for regional/local needs. The largest seismic hazard values in Mexico, the Caribbean, and Central and South America generally occur in areas that have been, or are likely to be, the sites of the largest plate boundary earthquakes. High hazard values occur in areas where shallow-to-intermediate seismicity occurs frequently. ?? 2004 Elsevier B.V. All rights reserved.

49 CFR 106.45 - Tracking rulemaking actions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION RULEMAKING PROCEDURES... rulemaking, public comments, petitions for rulemaking, appeals, records of additional rulemaking proceedings...

Chemical Preparations Industry: National Emission Standards for Hazardous Air Pollutants for Area Sources

EPA Pesticide Factsheets

National emissions standards for control of hazardous air pollutants (HAP) from the chemical preparations area source category. Includes rule history, Federal Registry citations, implementation information, and additional resources.

Coastal Hazards.

ERIC Educational Resources Information Center

Vandas, Steve

1998-01-01

Focuses on hurricanes and tsunamis and uses these topics to address other parts of the science curriculum. In addition to a discussion on beach erosion, a poster is provided that depicts these natural hazards that threaten coastlines. (DDR)

Options and processes for spent catalyst handling and utilization.

PubMed

Marafi, M; Stanislaus, A

2003-07-18

The quantity of spent hydroprocessing catalysts discarded as solid wastes in the petroleum refining industries has increased remarkably in recent years due to a rapid growth in the hydroprocessing capacity to meet the rising demand for low-sulfur fuels. Due to their toxic nature, spent hydroprocessing catalysts have been branded as hazardous wastes, and the refiners are experiencing pressure from environmental authorities to handle them safely. Several alternative methods such as reclamation of metals, rejuvenation and reuse, disposal in landfills and preparation of useful materials using spent catalysts as raw materials are available to deal with the spent catalyst problem. The technical feasibility as well as the environmental and economic aspects of these options are reviewed. In addition, details of two bench-scale processes, one for rejuvenation of spent hydroprocessing catalysts, and the other for producing non-leachable synthetic aggregate materials that were developed in this laboratory, are presented in this paper.

Radiological Worker II Training, Course 20301 (Live), Course 12909 (Test)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Jimmy D.

Radiological worker training is the basic building block for any additional radiological training you may receive. Upon completing radiological worker training, you will have the basic knowledge needed to work safely, using proper radiological practices, in areas where radiological hazards exist. You will also have a better understanding of the hazards and responsibilities associated with radiological work to help prevent the carelessness that can occur when working continually with or around radioactive material. This course does not qualify you for any specific radiological work. You may be required to take additional training at individual facilities to address facility- and job-specificmore » hazards and procedures.« less

Multilaboratory evaluation of 15 bioassays for (eco)toxicity screening and hazard ranking of engineered nanomaterials: FP7 project NANOVALID.

PubMed

Bondarenko, Olesja M; Heinlaan, Margit; Sihtmäe, Mariliis; Ivask, Angela; Kurvet, Imbi; Joonas, Elise; Jemec, Anita; Mannerström, Marika; Heinonen, Tuula; Rekulapelly, Rohit; Singh, Shashi; Zou, Jing; Pyykkö, Ilmari; Drobne, Damjana; Kahru, Anne

2016-11-01

Within EU FP7 project NANOVALID, the (eco)toxicity of 7 well-characterized engineered nanomaterials (NMs) was evaluated by 15 bioassays in 4 laboratories. The highest tested nominal concentration of NMs was 100 mg/l. The panel of the bioassays yielded the following toxicity order: Ag > ZnO > CuO > TiO2 > MWCNTs > SiO2 > Au. Ag, ZnO and CuO proved very toxic in the majority of assays, assumingly due to dissolution. The latter was supported by the parallel analysis of the toxicity of respective soluble metal salts. The most sensitive tests/species were Daphnia magna (towards Ag NMs, 24-h EC50 = 0.003 mg Ag/l), algae Raphidocelis subcapitata (ZnO and CuO, 72-h EC50 = 0.14 mg Zn/l and 0.7 mg Cu/l, respectively) and murine fibroblasts BALB/3T3 (CuO, 48-h EC50 = 0.7 mg Cu/l). MWCNTs showed toxicity only towards rat alveolar macrophages (EC50 = 15.3 mg/l) assumingly due to high aspect ratio and TiO2 towards R. subcapitata (EC50 = 6.8 mg Ti/l) due to agglomeration of TiO2 and entrapment of algal cells. Finally, we constructed a decision tree to select the bioassays for hazard ranking of NMs. For NM testing, we recommend a multitrophic suite of 4 in vitro (eco)toxicity assays: 48-h D. magna immobilization (OECD202), 72-h R. subcapitata growth inhibition (OECD201), 30-min Vibrio fischeri bioluminescence inhibition (ISO2010) and 48-h murine fibroblast BALB/3T3 neutral red uptake in vitro (OECD129) representing crustaceans, algae, bacteria and mammalian cells, respectively. Notably, our results showed that these assays, standardized for toxicity evaluation of "regular" chemicals, proved efficient also for shortlisting of hazardous NMs. Additional assays are recommended for immunotoxicity evaluation of high aspect ratio NMs (such as MWCNTs).

Health impact of the 2004 Andaman Nicobar earthquake and tsunami in Indonesia.

PubMed

Guha-Sapir, Debarati; van Panhuis, Willem Gijsbert

2009-01-01

The human impact of the tsunami that occurred on 26 December 2004 was enormous, with Indonesia bearing a huge proportion of the losses. The aftermath brought predictions of communicable disease outbreaks and widespread fear of epidemics. However, evidence from previous disasters due to natural hazards does not support all of these predictions. The objectives of this study were to: (1) describe the relative importance of infectious diseases and injuries as a consequence of a disaster due to natural hazards; and (2) identify key recommendations for the improvement of control and surveillance of these diseases during and after disasters. A team from the Center for Research on the Epidemiology of Disasters visited Jakarta and Banda Aceh from 11-23 January 2005, and collected data from the Central and Provincial Ministries of Health (MOH), the World Health Organization (WHO), and a field hospital from the International Committee of the Red Cross in Banda Aceh. The epidemiological profiles of diseases before and after the tsunami were compared. Cholera, tetanus, wounds and wound infections, acute respiratory infections, malaria, and dengue were included in this analysis. Certain diseases (e.g., cholera, malaria, dengue) are not always an immediate priority post-disaster. Rates of disaster-related health conditions requiring emergency response fell by half, and became negligible around four weeks after the precipitating events. Some conditions, such as aspiration pneumonia and tetanus, which normally are rare, require special preparedness for emergency personnel. In addition, resistant and rare pathogens are associated with disasters due to natural hazards in the tropics and require specialized knowledge for the rapid and successful treatment of related infections. Within the first four weeks of a disaster, international humanitarian agencies in the health sector should start working with the MOH. The WHO surveillance system established immediately after the tsunami offers lessons for developing a prototype for future emergencies. Guidelines for tetanus and aspiration pneumonia should be included in disaster medicine handbooks, and humanitarian aid groups should be prepared to provide emergency obstetrics and post-natal services. Relief funding after naturally occurring disasters should consider funding sustainability. Donors should know when to stop providing emergency relief funds and transition to recovery/development strategies.

Multilaboratory evaluation of 15 bioassays for (eco)toxicity screening and hazard ranking of engineered nanomaterials: FP7 project NANOVALID

PubMed Central

Bondarenko, Olesja M.; Heinlaan, Margit; Sihtmäe, Mariliis; Ivask, Angela; Kurvet, Imbi; Joonas, Elise; Jemec, Anita; Mannerström, Marika; Heinonen, Tuula; Rekulapelly, Rohit; Singh, Shashi; Zou, Jing; Pyykkö, Ilmari; Drobne, Damjana; Kahru, Anne

2016-01-01

Abstract Within EU FP7 project NANOVALID, the (eco)toxicity of 7 well-characterized engineered nanomaterials (NMs) was evaluated by 15 bioassays in 4 laboratories. The highest tested nominal concentration of NMs was 100 mg/l. The panel of the bioassays yielded the following toxicity order: Ag > ZnO > CuO > TiO2 > MWCNTs > SiO2 > Au. Ag, ZnO and CuO proved very toxic in the majority of assays, assumingly due to dissolution. The latter was supported by the parallel analysis of the toxicity of respective soluble metal salts. The most sensitive tests/species were Daphnia magna (towards Ag NMs, 24-h EC50 = 0.003 mg Ag/l), algae Raphidocelis subcapitata (ZnO and CuO, 72-h EC50 = 0.14 mg Zn/l and 0.7 mg Cu/l, respectively) and murine fibroblasts BALB/3T3 (CuO, 48-h EC50 = 0.7 mg Cu/l). MWCNTs showed toxicity only towards rat alveolar macrophages (EC50 = 15.3 mg/l) assumingly due to high aspect ratio and TiO2 towards R. subcapitata (EC50 = 6.8 mg Ti/l) due to agglomeration of TiO2 and entrapment of algal cells. Finally, we constructed a decision tree to select the bioassays for hazard ranking of NMs. For NM testing, we recommend a multitrophic suite of 4 in vitro (eco)toxicity assays: 48-h D. magna immobilization (OECD202), 72-h R. subcapitata growth inhibition (OECD201), 30-min Vibrio fischeri bioluminescence inhibition (ISO2010) and 48-h murine fibroblast BALB/3T3 neutral red uptake in vitro (OECD129) representing crustaceans, algae, bacteria and mammalian cells, respectively. Notably, our results showed that these assays, standardized for toxicity evaluation of “regular” chemicals, proved efficient also for shortlisting of hazardous NMs. Additional assays are recommended for immunotoxicity evaluation of high aspect ratio NMs (such as MWCNTs). PMID:27259032

Eliminating Survivor Bias in Two-stage Instrumental Variable Estimators.

PubMed

Vansteelandt, Stijn; Walter, Stefan; Tchetgen Tchetgen, Eric

2018-07-01

Mendelian randomization studies commonly focus on elderly populations. This makes the instrumental variables analysis of such studies sensitive to survivor bias, a type of selection bias. A particular concern is that the instrumental variable conditions, even when valid for the source population, may be violated for the selective population of individuals who survive the onset of the study. This is potentially very damaging because Mendelian randomization studies are known to be sensitive to bias due to even minor violations of the instrumental variable conditions. Interestingly, the instrumental variable conditions continue to hold within certain risk sets of individuals who are still alive at a given age when the instrument and unmeasured confounders exert additive effects on the exposure, and moreover, the exposure and unmeasured confounders exert additive effects on the hazard of death. In this article, we will exploit this property to derive a two-stage instrumental variable estimator for the effect of exposure on mortality, which is insulated against the above described selection bias under these additivity assumptions.

Quantitative rock-fall hazard and risk assessment for Yosemite Valley, Yosemite National Park, California

USGS Publications Warehouse

Stock, Greg M.; Luco, Nicolas; Collins, Brian D.; Harp, Edwin L.; Reichenbach, Paola; Frankel, Kurt L.

2012-01-01

caused injuries within developed regions located on or adjacent to talus slopes, highlighting the need for additional investigations into rock-fall hazard and risk. This assessment builds upon previous investigations of rock fall hazard and risk in Yosemite Valley (Wieczorek et al., 1998, 1999; Guzzetti et al., 2003; Wieczorek et al., 2008), and focuses on hazard and risk to structures posed by relatively frequent fragmental-type rock falls (Evans and Hungr, 1999), up to approximately 100,000 m3 in volume.

DoD’s War on Hazardous Waste. Volume 3. Identifying Specifications That Require the Use of Hazardous Substances

DTIC Science & Technology

1991-07-01

of all DoD and Federal standardization documents on file, refer to one or more of the 132 hazardous materials. Based on our... the use of the material as an option. In addition , we found 200 documents (14 percent) that specifically prohibit the use of one or more of the ...hazardous materials. Listing of standardization documents referring to chemicals are provided. We recommend more sophisticated review approaches and the provision

A non-ideal model for predicting the effect of dissolved salt on the flash point of solvent mixtures.

PubMed

Liaw, Horng-Jang; Wang, Tzu-Ai

2007-03-06

Flash point is one of the major quantities used to characterize the fire and explosion hazard of liquids. Herein, a liquid with dissolved salt is presented in a salt-distillation process for separating close-boiling or azeotropic systems. The addition of salts to a liquid may reduce fire and explosion hazard. In this study, we have modified a previously proposed model for predicting the flash point of miscible mixtures to extend its application to solvent/salt mixtures. This modified model was verified by comparison with the experimental data for organic solvent/salt and aqueous-organic solvent/salt mixtures to confirm its efficacy in terms of prediction of the flash points of these mixtures. The experimental results confirm marked increases in liquid flash point increment with addition of inorganic salts relative to supplementation with equivalent quantities of water. Based on this evidence, it appears reasonable to suggest potential application for the model in assessment of the fire and explosion hazard for solvent/salt mixtures and, further, that addition of inorganic salts may prove useful for hazard reduction in flammable liquids.

Water Quality and Brain Function

PubMed Central

Campbell, Arezoo

2017-01-01

In the United States, regulations are in place to ensure the quality of drinking water. Such precautions are intended to safeguard the health of the population. However, regulatory guidelines may at times fail to achieve their purpose. This may be due to lack of sufficient data regarding the health hazards of chronic low dose exposure to contaminants or the introduction of new substances that pose a health hazard risk that has yet to be identified. In this review, examples of different sources of contaminants in drinking water will be discussed, followed by an evaluation of some select individual toxicants with known adverse neurological impact. The ability of mixtures to potentially cause additive, synergistic, or antagonistic neurotoxic responses will be briefly addressed. The last section of the review will provide examples of select mechanisms by which different classes of contaminants may lead to neurological impairments. The main objective of this review is to bring to light the importance of considering trace amounts of chemicals in the drinking water and potential brain abnormalities. There is continued need for toxicology studies to better understand negative consequences of trace amounts of toxins and although it is beyond the scope of this brief overview it is hoped that the review will underscore the paucity of studies focused on determining how long-term exposure to minute levels of contaminants in drinking water may pose a significant health hazard. PMID:29267198

Use of new field methods of semen analysis in the study of occupational hazards to reproduction: the example of ethylene dibromide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrader, S.M.; Ratcliffe, J.M.; Turner, T.W.

1987-12-01

Increasing attention has been paid to the use of semen analysis as an indicator of exposure to potential mutagenic and reproductive hazards. In the infertility clinic setting, semen evaluations include the measurement of sperm concentration, volume, pH, motility, velocity and morphology, the analysis of seminal plasma to evaluate accessory sex gland function and, in some cases, the in vitro evaluation of fertilization capacity and sperm-cervical mucus interaction. To date, however, the study of semen characteristics of occupationally exposed populations has been confined principally to the measurement of sperm concentration and sperm morphology. This has been largely due to the unavailabilitymore » of portable equipment suitable for the measurement of other semen characteristics and the difficulty of obtaining fresh semen samples in the field setting. National Institute for Occupational Safety and Health researchers have developed mobile laboratory facilities which enable us to evaluate fresh samples, in the field, for semen characteristics in addition to concentration and morphology. This paper describes the application of these methods using the example of our recent cross-sectional study of workers occupationally exposed to ethylene dibromide in the papaya fumigation industry. We discuss our findings in the context of the usefulness of semen analysis as an indicator of occupational hazards to male reproduction.« less

Situational analysis of household energy and biomass use and associated health burden of indoor air pollution and mitigation efforts in Pakistan.

PubMed

Fatmi, Zafar; Rahman, Asma; Kazi, Ambreen; Kadir, M Masood; Sathiakumar, Nalini

2010-07-01

Biomass fuel burning leads to high levels of suspended particulate matter and hazardous chemicals in the indoor environment in countries where it is in common use, contributing significantly to indoor air pollution (IAP). A situational analysis of household energy and biomass use and associated health effects of IAP was conducted by reviewing published and un-published literature about the situation in Pakistan. In addition to attempt to quantify the burden of ill health due to IAP, this paper also appraises the mitigation measures undertaken to avert the problem in Pakistan. Unfortunately, IAP is still not a recognized environmental hazard in Pakistan and there are no policies and standards to control it at the household level. Only a few original studies related to health effects of IAP have been conducted, mainly on women's health and birth outcome, and only a few governmental, non-governmental and academic institutions are working to improve the IAP situation by introducing improved stoves and renewable energy technology at a small scale. Control of IAP health hazards in Pakistan requires an initial meeting of the stakeholders to define a policy and an action agenda. Simultaneously, studies gathering evidence of impact of intervention through available technologies such as improved stoves would have favorable impact on the health, especially of women and children in Pakistan.

Airborne Gravity Survey and Ground Gravity in Afghanistan: A Website for Distribution of Data

USGS Publications Warehouse

Abraham, Jared D.; Anderson, Eric D.; Drenth, Benjamin J.; Finn, Carol A.; Kucks, Robert P.; Lindsay, Charles R.; Phillips, Jeffrey D.; Sweeney, Ronald E.

2008-01-01

Afghanistan?s geologic setting suggests significant natural resource potential. Although important mineral deposits and petroleum resources have been identified, much of the country?s potential remains unknown. Airborne geophysical surveys are a well- accepted and cost-effective method for remotely obtaining information of the geological setting of an area. A regional airborne geophysical survey was proposed due to the security situation and the large areas of Afghanistan that have not been covered using geophysical exploration methods. Acting upon the request of the Islamic Republic of Afghanistan Ministry of Mines, the U.S. Geological Survey contracted with the U.S. Naval Research Laboratory to jointly conduct an airborne geophysical and remote sensing survey of Afghanistan. Data collected during this survey will provide basic information for mineral and petroleum exploration studies that are important for the economic development of Afghanistan. Additionally, use of these data is broadly applicable in the assessment of water resources and natural hazards, the inventory and planning of civil infrastructure and agricultural resources, and the construction of detailed maps. The U.S. Geological Survey is currently working in cooperation with the U.S. Agency of International Development to conduct resource assessments of the country of Afghanistan for mineral, energy, coal, and water resources, and to assess geologic hazards. These geophysical and remote sensing data will be used directly in the resource and hazard assessments.

Injury to endoscopic personnel from tripping over exposed cords, wires, and tubing in the endoscopy suite: a preventable cause of potentially severe workplace injury.

PubMed

Cappell, Mitchell S

2010-04-01

BACKGROUND The endoscopy unit before remediation may be a high-risk area for slip and fall injuries due to a large number of exposed above-the-floor wires in the endoscopy rooms, dimmed lighting during endoscopic procedures, and staff inattention to obstacles due to preoccupation with the endoscopic patient. AIM To describe a novel, previously unappreciated workplace hazard to endoscopic personnel: Exposed wires in the endoscopy unit.METHODS This study is a retrospective review of 110,000 endoscopic procedures performed during the last 5 years at an academic, teaching hospital with a high-volume endoscopy unit. All significant orthopedic injuries to endoscopic personnel from slips, twists, and falls from tripping over exposed cords in the endoscopy unit were reviewed. The severity of injury was documented based on roentgenographic findings, number of days of missed work, number of days with a modified work schedule, and requirement for orthopedic surgery. The number of potentially exposed cords per endoscopy room was determined. RESULTS During the 5-year study period, three endoscopic personnel suffered significant orthopedic injuries from slips, twists, and falls from tripping over cords, wires, or tubing lying exposed over the floor in the endoscopy suite: The resulting injuries consisted of fourth and fifth metacarpal hand fractures due to a fall after tripping on oxygen tubing; a rib fracture due to tripping on electrical wires trailing from an endoscopy cart; and a grade II ankle sprain due to the foot becoming entangled in oxygen tubing. All injuries resulted in lost days of work [mean 9.3 +/- 11.0 (SD) days] and in additional days of restricted work (mean 41.7 +/- 31.8 days). One injury required orthopedic surgery. Hospital review revealed a mean of 35.3 +/- 7.5 cords, wires, or tubing per endoscopy procedure room, the majority of which were exposed above the floor before remediation (n = 10 rooms). Remediation of exposed wires included: bundling related wires together in a cable to reduce the number of independent wires, covering exposed wires on the floor with a nonslip heavy mat, and running wires from ceiling outlets to equipment high above ground (e.g. mounted endoscopy video monitors). CONCLUSIONS Tripping, slipping, and falling over exposed wires can cause significant injury to endoscopic personnel. This previously undescribed hazard should be preventable by simple remediation, and all endoscopic personnel, hospital architects, hospital administrators, and governmental regulators should be alerted to this potential hazard

75 FR 21660 - Notice of Lodging of Consent Decree Under the Residential Lead-Based Paint Hazard Reduction Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Housing and Urban Development (``HUD'') under the Residential Lead-Based Paint Hazard Reduction Act, 42 U... examined at the Department of Housing and Urban Development, Office of General Counsel, 451 7th St. NW... paint free. In addition, Defendant will abate lead-based paint hazards on friction and impact surfaces...

A risk assessment approach for fresh fruits.

PubMed

Bassett, J; McClure, P

2008-04-01

To describe the approach used in conducting a fit-for-purpose risk assessment of microbiological human pathogens associated with fresh fruit and the risk management recommendations made. A qualitative risk assessment for microbiological hazards in fresh fruit was carried out based on the Codex Alimentarius (Codex) framework, modified to consider multiple hazards and all fresh (whole) fruits. The assessment determines 14 significant bacterial, viral, protozoal and nematodal hazards associated with fresh produce, assesses the probable level of exposure from fresh fruit, concludes on the risk from each hazard, and considers and recommends risk management actions. A review of potential risk management options allowed the comparison of effectiveness with the potential exposure to each hazard. Washing to a recommended protocol is an appropriate risk management action for the vast majority of consumption events, particularly when good agricultural and hygienic practices are followed and with the addition of refrigerated storage for low acid fruit. Additional safeguards are recommended for aggregate fruits with respect to the risk from protozoa. The potentially complex process of assessing the risks of multiple hazards in multiple but similar commodities can be simplified in a qualitative assessment approach that employs the Codex methodology.

Deadly Cold: Health Hazards Due to Cold Weather. An Information Paper by the Subcommittee on Health and Long-Term Care of the Select Committee on Aging. House of Representatives, Ninety-Eighth Congress, Second Session (February 1984).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Aging.

This paper, on the health hazards of cold weather for elderly persons, presents information from various sources on the death rates in winter throughout the United States. After reviewing the scope of the problem, specific health hazards associated with cold weather are discussed, i.e., hypothermia, fires, carbon monoxide poisoning, and influenza…

Sodium Chloride Does Not Ensure Microbiological Safety of Foods: Cases and Solutions.

PubMed

Kim, Nam Hee; Cho, Tae Jin; Rhee, Min Suk

2017-01-01

Addition of salt or salt-containing water to food is one of the oldest and most effective preservation methods in history; indeed, salt-cured foods are generally recognized as microbiologically safe due to their high salinity. However, a number of microbiological risks remain. The microbiological hazards and risks associated with salt-cured foods must be addressed more in-depth as they are likely to be underestimated by previous studies. This review examined a number of scientific reports and articles about the microbiological safety of salt-cured foods, which included salted, brined, pickled, and/or marinated vegetables, meat, and seafood. The following subjects are covered in order: (1) clinical cases and outbreaks attributed to salt-cured foods; (2) the prevalence of foodborne pathogens in such foods; (3) the molecular, physiological, and virulent responses of the pathogens to the presence of NaCl in both laboratory media and food matrices; (4) the survival and fate of microorganisms in salt-cured foods (in the presence/absence of additional processes); and (5) the interaction between NaCl and other stressors in food processes (e.g., acidification, antimicrobials, drying, and heating). The review provides a comprehensive overview of potentially hazardous pathogens associated with salt-cured foods and suggests further research into effective intervention techniques that will reduce their levels in the food chain. Copyright © 2017 Elsevier Inc. All rights reserved.

Excess mortality in Europe following a future Laki-style Icelandic eruption

PubMed Central

Schmidt, Anja; Ostro, Bart; Carslaw, Kenneth S.; Wilson, Marjorie; Thordarson, Thorvaldur; Mann, Graham W.; Simmons, Adrian J.

2011-01-01

Historical records show that the A.D. 1783–1784 Laki eruption in Iceland caused severe environmental stress and posed a health hazard far beyond the borders of Iceland. Given the reasonable likelihood of such an event recurring, it is important to assess the scale on which a future eruption could impact society. We quantify the potential health effects caused by an increase in air pollution during a future Laki-style eruption using a global aerosol model together with concentration-response functions derived from current epidemiological studies. The concentration of particulate matter with diameters smaller than 2.5 µm is predicted to double across central, western, and northern Europe during the first 3 mo of the eruption. Over land areas of Europe, the current World Health Organization 24-h air quality guideline for particulate matter with diameters smaller than 2.5 µm is exceeded an additional 36 d on average over the course of the eruption. Based on the changes in particulate air pollution, we estimate that approximately 142,000 additional cardiopulmonary fatalities (with a 95% confidence interval of 52,000–228,000) could occur in Europe. In terms of air pollution, such a volcanic eruption would therefore be a severe health hazard, increasing excess mortality in Europe on a scale that likely exceeds excess mortality due to seasonal influenza. PMID:21930954

American Healthy Homes Survey (AHHS)

EPA Pesticide Factsheets

A nationally representative sample of homes was selected for this survey. AHHS measured levels of lead, lead hazards, and allergens in homes nationwide. AHHS also surveyed additional potential health hazards such as arsenic, pesticides, and molds. The lead

49 CFR 172.323 - Infectious substances.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.323 Infectious substances. (a) In addition to other requirements of this...

Overall Control on Solid Rocket Motor Hazard Zone: Example of VEGA an Innovative Solution at System Level

NASA Astrophysics Data System (ADS)

Vertueux, M.

2013-09-01

The arrival of additional Space launch vehicles Soyouz and Vega in Guiana Space Center facilities faced a new ground range safety major question: The technical hazards assessment and management related to the preparation of these three launchers simultaneously with the same high level of safety. The objective of this publication is to highlight the new safety solutions that are applied in CSG to reduce the risk of self-propulsion of the stages of VEGA launcher. During all the preparation campaign of VEGA launch vehicle, the explosive risk due to the use of solid propellant is permanent. Uncontrolled propulsion of a solid rocket motor is capable of destruction of other important installations with catastrophic effects. This event could cause loss of human lives and great damages to the CSG launch site structures. Early in the space program development phases of VEGA, the risk of self- propulsion of solid rocket motors and the solutions to avoid the "domino effects" on neighboring facilities have been issued as one of the major concern in term of safety.

A review of phase separation issues in aviation gasoline fuel and motor gasoline fuels in aviation

NASA Astrophysics Data System (ADS)

Thanikasalam, K.; Rahmat, M.; Fahmi, A. G. Mohammad; Zulkifli, A. M.; Shawal, N. Noor; Ilanchelvi, K.; Ananth, M.; Elayarasan, R.

2018-05-01

In an attempt to bring in sustainable energy resources into the current combustibles mix, recent European legislations make obligatory the addition of biogenic fuels into traditional fossil gasoline. The preferred biogenic fuel, for economic reasons, is predominantly ethanol. Even though likened to fossil gasoline constituents, ethanol has a dissimilar chemical formulation that may lead to a potentially hazardous physicochemical phenomenon, particularly in the presence of water. Owing to increased financially driven propensity to utilize motor vehicle gasoline as aviation gasoline fuel, this may result in potentially hazardous situations, specifically in running smaller or compact General Aviation aircraft. The potential risks posed by ethanol admixtures in aircraft are phase separation and carburettor icing. Gasoline mixed with ethanol is also prone to an increased vulnerability to vapor lock that happens when fuel turns into vapor in the fuel pumps due to high temperatures and lessened ambient pressure at high altitudes. This article provides a literature review on phase separation issues in aviation gasoline fuel and motor gasoline fuels in aviation.

Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns.

PubMed

Duan, Huabo; Hou, Kun; Li, Jinhui; Zhu, Xiaodong

2011-03-01

The dismantling of printed circuit board assemblies (PCBAs) and the recovery of their useful materials can lead to serious environmental impacts mainly due to their complicated physical structure and the variety of toxic elements contained in their material composition. So far, less attention has been paid to their responsible recycling compared to that of bare printed circuit boards. Combined with other materials recovery process, proper dismantling of PCBAs is beneficial to conserve scarce resources, reuse the components, and eliminate or safely dispose of hazardous materials. In analyzing the generation, resources potential and hazardous risk of scrap PCBAs, technologies used for the dismantling of waste PCBAs have been widely investigated and reviewed from the aspects of both industrial application and laboratory-scale studies. In addition, the feasibility of PCBA dismantling has been discussed, the determinants of which, including the heating conditions and mechanical properties have been identified. Moreover, this paper evaluates the environmental consequences caused by the dismantling of PCBAs. Copyright © 2010 Elsevier Ltd. All rights reserved.

Failure analysis and modeling of a VAXcluster system

NASA Technical Reports Server (NTRS)

Tang, Dong; Iyer, Ravishankar K.; Subramani, Sujatha S.

1990-01-01

This paper discusses the results of a measurement-based analysis of real error data collected from a DEC VAXcluster multicomputer system. In addition to evaluating basic system dependability characteristics such as error and failure distributions and hazard rates for both individual machines and for the VAXcluster, reward models were developed to analyze the impact of failures on the system as a whole. The results show that more than 46 percent of all failures were due to errors in shared resources. This is despite the fact that these errors have a recovery probability greater than 0.99. The hazard rate calculations show that not only errors, but also failures occur in bursts. Approximately 40 percent of all failures occur in bursts and involved multiple machines. This result indicates that correlated failures are significant. Analysis of rewards shows that software errors have the lowest reward (0.05 vs 0.74 for disk errors). The expected reward rate (reliability measure) of the VAXcluster drops to 0.5 in 18 hours for the 7-out-of-7 model and in 80 days for the 3-out-of-7 model.

Risk factors for oral methotrexate failure in patients with inflammatory polyarthritis: results from a UK prospective cohort study.

PubMed

Bluett, James; Sergeant, Jamie C; MacGregor, Alex J; Chipping, Jacqueline R; Marshall, Tarnya; Symmons, Deborah P M; Verstappen, Suzanne M M

2018-03-20

Oral methotrexate (MTX) is the first-line therapy for patients with rheumatoid arthritis (RA). However, approximately one quarter of patients discontinue MTX within 12 months. MTX failure, defined as MTX cessation or the addition of another anti-rheumatic drug, is usually due adverse event(s) and/or inefficacy. The aims of this study were to evaluate the rate and predictors of oral MTX failure. Subjects were recruited from the Norfolk Arthritis Register (NOAR), a primary care-based inception cohort of patients with early inflammatory polyarthritis (IP). Subjects were eligible if they commenced MTX as their first DMARD and were recruited between 2000 and 2008. Patient-reported reasons for MTX failure were recorded and categorised as adverse event, inefficacy or other. The addition of a second DMARD during the study period was categorised as failure due to inefficacy. Cox proportional hazards regression models were used to assess potential predictors of MTX failure, accounting for competing risks. A total of 431 patients were eligible. The probability of patients remaining on MTX at 2 years was 82%. Competing risk analysis revealed that earlier MTX failure due to inefficacy was associated with rheumatoid factor (RF) positivity, younger age at symptom onset and higher baseline disease activity (DAS-28). MTX cessation due to an adverse event was less likely in the RF-positive cohort. RF-positive inflammatory polyarthritis patients who are younger with higher baseline disease activity have an increased risk of MTX failure due to inefficacy. Such patients may require combination therapy as a first-line treatment.

Mass Movement Hazards in the Mediterranean; A review on applied techniques and methodologies

NASA Astrophysics Data System (ADS)

Ziade, R.; Abdallah, C.; Baghdadi, N.

2012-04-01

Emergent population and expansions of settlements and life-lines over hazardous areas in the Mediterranean region have largely increased the impact of Mass Movements (MM) both in industrialized and developing countries. This trend is expected to continue in the next decades due to increased urbanization and development, continued deforestation and increased regional precipitation in MM-prone areas due to changing climatic patterns. Consequently, and over the past few years, monitoring of MM has acquired great importance from the scientific community as well as the civilian one. This article begins with a discussion of the MM classification, and the different topographic, geologic, hydrologic and environmental impacting factors. The intrinsic (preconditioning) variables determine the susceptibility of MM and extrinsic factors (triggering) can induce the probability of MM occurrence. The evolution of slope instability studies is charted from geodetic or observational techniques, to geotechnical field-based origins to recent higher levels of data acquisition through Remote Sensing (RS) and Geographic Information System (GIS) techniques. Since MM detection and zoning is difficult in remote areas, RS and GIS have enabled regional studies to predominate over site-based ones where they provide multi-temporal images hence facilitate greatly MM monitoring. The unusual extent of the spectrum of MM makes it difficult to define a single methodology to establish MM hazard. Since the probability of occurrence of MM is one of the key components in making rational decisions for management of MM risk, scientists and engineers have developed physical parameters, equations and environmental process models that can be used as assessment tools for management, education, planning and legislative purposes. Assessment of MM is attained through various modeling approaches mainly divided into three main sections: quantitative/Heuristic (1:2.000-1:10.000), semi-quantitative/Statistical (1:25.000-1:50.000) and qualitative/Deterministic (1:100.000 to 1:250.00).The scale of study is usually chosen on the basis of the purpose of assessment, the extent of the study area and data availability. Despite the operational and theoretical limitations due to an extent of data uncertainty where geomorphologic data for instance remains basically subjective and descriptive in addition to unpredictable climatic factors, MM hazard evaluation may constitute a suitable, cost-effective aid to land-use planning. The objective of this paper is to provide a holistic understanding of the nature of different MM, parameters affecting their occurrence and to put forward the wide range of MM detection, modeling and zoning techniques that would eventually serve as prediction and warning systems for communities at risk.

78 FR 41853 - Safety Advisory Guidance: Heating Rail Tank Cars To Prepare Hazardous Material for Unloading or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... rail tank car due to chemical self-reaction and expansion of the toluene diisocyanate matter wastes. On...: Cheryl West Freeman, Division of Engineering and Research, Pipeline and Hazardous Materials Safety... catastrophically ruptured at a transfer station at the BASF Corporation chemical facility in Freeport, Texas. The...

HOW to Recognize Hazardous Defects in Trees

Treesearch

Minnesota Department of Natural Resources; USDA Forest Service

1996-01-01

Trees add to our enjoyment of outdoor experiences whether in forests, parks, or urban landscapes. Too often, we are unaware of the risks associated with defective trees, which can cause personal injury and property damage. Interest in hazard tree management has increased in recent years due to safety and liability concerns resulting from preventable accidents....

Further Evaluation of DNT Hazard Screening using Neural Networks from Rat Cortical Neurons on Multi-well Microelectrode Arrays

EPA Science Inventory

Thousands of chemicals have not been characterized for their DNT potential. Due to the need for DNT hazard identification, efforts to develop screening assays for DNT potential is a high priority. Multi-well microelectrode arrays (MEA) measure the spontaneous activity of electr...

A step in the right direction: new flow depth relationships for stepped spillway design

USDA-ARS?s Scientific Manuscript database

A common deficiency for embankment dams changing from a low hazard to a high hazard dam is inadequate spillway capacity. Roller compacted concrete (RCC) stepped spillways are a popular method to address this issue. Stepped spillway research has gained momentum in recent years due to the need for d...

78 FR 23503 - Hazardous Materials; Temporary Reduction of Registration Fees

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... the annual registration fee to account for any unexpended balance in the Hazardous Materials Emergency Preparedness (HMEP) Fund. Due to an unexpended balance that has accumulated in the Fund, PHMSA is lowering the... and thus draw down the unexpended balance as soon as possible, PHMSA is issuing this final rule...

CFD model simulation of LPG dispersion in urban areas

NASA Astrophysics Data System (ADS)

Pontiggia, Marco; Landucci, Gabriele; Busini, Valentina; Derudi, Marco; Alba, Mario; Scaioni, Marco; Bonvicini, Sarah; Cozzani, Valerio; Rota, Renato

2011-08-01

There is an increasing concern related to the releases of industrial hazardous materials (either toxic or flammable) due to terrorist attacks or accidental events in congested industrial or urban areas. In particular, a reliable estimation of the hazardous cloud footprint as a function of time is required to assist emergency response decision and planning as a primary element of any Decision Support System. Among the various hazardous materials, the hazard due to the road and rail transportation of liquefied petroleum gas (LPG) is well known since large quantities of LPG are commercialized and the rail or road transportation patterns are often close to downtown areas. Since it is well known that the widely-used dispersion models do not account for the effects of any obstacle like buildings, tanks, railcars, or trees, in this paper a CFD model has been applied to simulate the reported consequences of a recent major accident involving an LPG railcar rupture in a congested urban area (Viareggio town, in Italy), showing both the large influence of the obstacles on LPG dispersion as well as the potentials of CFD models to foresee such an influence.

Occupational Health Hazards in ICU Nursing Staff

PubMed Central

Shimizu, Helena Eri; Couto, Djalma Ticiani; Merchán-Hamann, Edgar; Branco, Anadergh Barbosa

2010-01-01

This study analyzed occupational health hazards for Intensive Care Unit (ICU) nurses and nursing technicians, comparing differences in the number and types of hazards which occur at the beginning and end of their careers. A descriptive cross-sectional study was carried out with 26 nurses and 96 nursing technicians from a public hospital in the Federal District, Brazil. A Likert-type work-related symptom scale (WRSS) was used to evaluate the presence of physical, psychological, and social risks. Data were analyzed with the use of the SPSS, version 12.0, and the Kruskal-Wallis test for statistical significance and differences in occupational health hazards at the beginning and at the end of the workers' careers. As a workplace, ICUs can cause work health hazards, mostly physical, to nurses and nursing technicians due to the frequent use of physical energy and strength to provide care, while psychological and social hazards occur to a lesser degree. PMID:21994814

Prevention of Major Accident Hazards (MAHs) in major Hazard Installation (MHI) premises via land use planning (LUP): a review

NASA Astrophysics Data System (ADS)

Khudbiddin, M. Q.; Rashid, Z. A.; Yeong, A. F. M. S.; Alias, A. B.; Irfan, M. F.; Fuad, M.; Hayati, H.

2018-03-01

For a number of years, there is a concern about the causes of major hazards, their identification, risk assessment and the process of its management from the global perspective on the activities of the industries due to the protection of the environment, human and property. Though, industries cannot take pleasure in their business by harming the nature of the land, there are a number of measures that need to be put into consideration by the industries. Such measures are in terms of management and safety for the businesses, lives, properties, as well as the environment. The lack of consideration in the selected appropriate criteria can result in major accidental hazards (MAHs). This paper will review the land use planning (LUP) methods used in the past and present to prevent major accident hazards at major hazard installation (MHI).

40 CFR 267.52 - What must be in the contingency plan?

Code of Federal Regulations, 2010 CFR

2010-07-01

... hazardous waste or hazardous waste constituents to air, soil, or surface water at the facility. (2) Describe... decontamination equipment), where this equipment is required. In addition, you must include the location and a...

Self-contained miniature electronics transceiver provides voice communication in hazardous environment

NASA Technical Reports Server (NTRS)

Cribb, H. E.

1970-01-01

Two-way wireless voice communications system is automatic, provides freedom of movement, allows for complete awareness of the environment, and does not present any additional hazards such as activation of electromagnetic sensitive devices.

43 CFR 3715.2-1 - What additional characteristic(s) must my occupancy have?

Code of Federal Regulations, 2012 CFR

2012-10-01

... readily portable, and if left unattended, creates a hazard to public safety; (d) Protecting the public from surface uses, workings, or improvements which, if left unattended, create a hazard to public...

43 CFR 3715.2-1 - What additional characteristic(s) must my occupancy have?

Code of Federal Regulations, 2013 CFR

2013-10-01

... readily portable, and if left unattended, creates a hazard to public safety; (d) Protecting the public from surface uses, workings, or improvements which, if left unattended, create a hazard to public...

43 CFR 3715.2-1 - What additional characteristic(s) must my occupancy have?

Code of Federal Regulations, 2014 CFR

2014-10-01

... readily portable, and if left unattended, creates a hazard to public safety; (d) Protecting the public from surface uses, workings, or improvements which, if left unattended, create a hazard to public...

Coastal pollution hazards in southern California observed by SAR imagery: stormwater plumes, wastewater plumes, and natural hydrocarbon seeps

NASA Technical Reports Server (NTRS)

Digiacomo, Paul M.; Washburn, Libe; Holt, Benjamin; Jones, Burton H.

2004-01-01

Stormwater runoff plumes, municipal wastewater plumes, and natural hydrocarbon seeps are important pollution hazards for the heavily populated Southern California Bight (SCB). Due to their small size, dynamic and episodic nature, these hazards are difficult to sample adequately using traditional in situ oceanographic methods. Complex coastal circulation and persistent cloud cover can further complicate detection and monitoring of these hazards. We use imagery from space-borne synthetic aperture radar (SAR), complemented by field measurements, to examine these hazards in the SCB. The hazards are detectable in SAR imagery because they deposit surfactants on the sea surface, smoothing capillary and small gravity waves to produce areas of reduced backscatter compared with the surrounding ocean. We suggest that high-resolution SAR, which obtains useful data regardless of darkness or cloud cover, could be an important observational tool for assessment and monitoring of coastal marine pollution hazards in the SCB and other urbanized coastal regions.

Health hazard evaluation report HETA 81-472-1380, Pennsylvania Power and Light, Martins Creek Steam Electric Station, Martins Creek, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, F.A.

1983-10-01

In August 1980, the National Institute for Occupational Safety and Health (NIOSH) received a request from the International Brotherhood of Electrical Workers Local 1600 for a Health Hazard Evaluation at the Pennsylvania Power and Light Company's Martins Creek Steam Electric Station in Martins Creek, Pennsylvania. The union was concerned about potential health and explosion hazards to employees from coal dust in Units 1 and 2 and the coal field. Based on environmental studies conducted at the time of the survey, NIOSH has determined that a potential health hazard may have existed due to exposure to respirable coal dust and quartz.more » Recommendations were made to ensure that potential health and explosion hazards are avoided in the future.« less

40 CFR 721.1550 - Benzenediazonium, 4-(di-methyl-amino)-, salt with 2-hy-droxy-5-sul-fo-benzoic acid (1:1).

Code of Federal Regulations, 2010 CFR

2010-07-01

...)(vi), (a)(5)(vii), (a)(6)(i), (a)(6)(ii), and (c). (ii) Hazard communication program. Requirements as...). In addition, the following human health hazard statement shall appear on each label as specified at... they are true and do not alter the meaning of the required statement. Human health hazard statements...

Quantitative rock-fall hazard and risk assessment for Yosemite Valley, Yosemite National Park, California

USGS Publications Warehouse

Stock, Greg M.; Luco, Nicolas; Collins, Brian D.; Harp, Edwin L.; Reichenbach, Paola; Frankel, Kurt L.

2014-01-01

Rock falls are common in Yosemite Valley, California, posing substantial hazard and risk to the approximately four million annual visitors to Yosemite National Park. Rock falls in Yosemite Valley over the past few decades have damaged structures and caused injuries within developed regions located on or adjacent to talus slopes highlighting the need for additional investigations into rock-fall hazard and risk. This assessment builds upon previous investigations of rock-fall hazard and risk in Yosemite Valley and focuses on hazard and risk to structures posed by relatively frequent fragmental-type rock falls as large as approximately 100,000 (cubic meters) in volume.

Development of a Probabilistic Tsunami Hazard Analysis in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toshiaki Sakai; Tomoyoshi Takeda; Hiroshi Soraoka

2006-07-01

It is meaningful for tsunami assessment to evaluate phenomena beyond the design basis as well as seismic design. Because once we set the design basis tsunami height, we still have possibilities tsunami height may exceeds the determined design tsunami height due to uncertainties regarding the tsunami phenomena. Probabilistic tsunami risk assessment consists of estimating for tsunami hazard and fragility of structures and executing system analysis. In this report, we apply a method for probabilistic tsunami hazard analysis (PTHA). We introduce a logic tree approach to estimate tsunami hazard curves (relationships between tsunami height and probability of excess) and present anmore » example for Japan. Examples of tsunami hazard curves are illustrated, and uncertainty in the tsunami hazard is displayed by 5-, 16-, 50-, 84- and 95-percentile and mean hazard curves. The result of PTHA will be used for quantitative assessment of the tsunami risk for important facilities located on coastal area. Tsunami hazard curves are the reasonable input data for structures and system analysis. However the evaluation method for estimating fragility of structures and the procedure of system analysis is now being developed. (authors)« less

Integrating Hydrologic and Water Quality Models as a Decision Support Tool for Implementation of Low Impact Development in a Coastal Urban Watershed under Climate Variability and Sea Level Rise

NASA Astrophysics Data System (ADS)

Chang, N. B.

2016-12-01

Many countries concern about development and redevelopment efforts in urban regions to reduce the flood risk by considering hazards such as high-tide events, storm surge, flash floods, stormwater runoff, and impacts of sea level rise. Combining these present and future hazards with vulnerable characteristics found throughout coastal communities such as majority low-lying areas and increasing urban development, create scenarios for increasing exposure of flood hazard. As such, the most vulnerable areas require adaptation strategies and mitigation actions for flood hazard management. In addition, in the U.S., Numeric Nutrient Criteria (NNC) are a critical tool for protecting and restoring the designated uses of a waterbody with regard to nitrogen and phosphorus pollution. Strategies such as low impact development (LID) have been promoted in recent years as an alternative to traditional stormwater management and drainage to control both flooding and water quality impact. LID utilizes decentralized multifunctional site designs and incorporates on-site storm water management practices rather than conventional storm water management approaches that divert flow toward centralized facilities. How to integrate hydrologic and water quality models to achieve the decision support becomes a challenge. The Cross Bayou Watershed of Pinellas County in Tampa Bay, a highly urbanized coastal watershed, is utilized as a case study due to its sensitivity to flood hazards and water quality management within the watershed. This study will aid the County, as a decision maker, to implement its stormwater management policy and honor recent NNC state policy via demonstration of an integrated hydrologic and water quality model, including the Interconnected Channel and Pond Routing Model v.4 (ICPR4) and the BMPTRAIN model as a decision support tool. The ICPR4 can be further coupled with the ADCIRC/SWAN model to reflect the storm surge and seal level rise in coastal regions.

Childhood adversity, adult socioeconomic status and risk of work disability: a prospective cohort study.

PubMed

Halonen, Jaana I; Kivimäki, Mika; Vahtera, Jussi; Pentti, Jaana; Virtanen, Marianna; Ervasti, Jenni; Oksanen, Tuula; Lallukka, Tea

2017-09-01

To examine the combined effects of childhood adversities and low adult socioeconomic status (SES) on the risk of future work disability. Included were 34 384 employed Finnish Public Sector study participants who responded to questions about childhood adversities (none vs any adversity, eg, parental divorce or financial difficulties) in 2008, and whose adult SES in 2008 was available. We categorised exposure into four groups: neither (reference), childhood adversity only, low SES only or both. Participants were followed from 2009 until the first period of register-based work disability (sickness absence >9 days or disability pension) due to any cause, musculoskeletal or mental disorders; retirement; death or end of follow-up (December 2011). We ran Cox proportional hazard models adjusted for behavioural, health-related and work-related covariates, and calculated synergy indices for the combined effects. When compared with those with neither exposure, HR for work disability from any cause was increased among participants with childhood adversity, with low SES, and those with both exposures. The highest hazard was observed in those with both exposures: HR 2.53, 95% CI 2.29 to 2.79 for musculoskeletal disability, 1.55, 95% CI 1.36 to 1.78 for disability due to mental disorders and 1.29, 95% CI 1.20 to 1.39 for disability due to other reasons. The synergy indices did not indicate synergistic effects. These findings indicate that childhood psychosocial adversity and low adult SES are additive risk factors for work disability. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Statins and Risk of Bleeding: An Analysis to Evaluate Possible Bias Due to Prevalent Users and Healthy User Aspects.

PubMed

van Rein, Nienke; Cannegieter, Suzanne C; le Cessie, Saskia; Rosendaal, Frits R; Reitsma, Pieter H; van der Meer, Felix J M; Lijfering, Willem M

2016-05-15

Statins are said to protect against a wide range of diseases. We studied to what extent potential bias influences the results of studies on beneficial side effects of statins. We selected 8,188 atrial fibrillation patients who started treatment with anticoagulants at the Leiden Anticoagulation Clinic in the Netherlands between 2003 and 2009 and experienced 1,683 minor and 451 major bleeds during 18,105 person-years of follow-up. Statins were associated with a risk reduction of 9% for bleeds (hazard ratio = 0.91, 95% confidence interval: 0.82, 1.00). Additionally, analyses were stratified by age, incident users (patients who started statins during follow-up, i.e., an inception cohort), and prevalent statin users (statin users at baseline), as restriction to incident users avoids overoptimistic risk estimates. After stratification, the protective associations disappeared or reversed (range of hazard ratios = 0.99-3.22), except for patients aged 75 years or older. This remaining association could be due to another bias as, according to guidelines, in the elderly, statins should be prescribed only to those with a reasonable life expectancy. This could have resulted in a comparison of fit statin users with less fit nonstatin users (healthy user effect). The apparent protective association of statins on bleeds may be due to bias. We recommend stratification by age and incident and prevalent statin use when studying associations of statins with disease outcomes to avoid overoptimistic risk estimates. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A fluvial and pluvial probabilistic flood hazard analysis for Can Tho city, Vietnam

NASA Astrophysics Data System (ADS)

Apel, Heiko; Martinez, Oriol; Thi Chinh, Do; Viet Dung, Nguyen

2014-05-01

Can Tho city is the largest city and the economic heart of the Mekong Delta, Vietnam. Due to its economic importance and envisaged development goals the city grew rapidly in population size and extend over the last two decades. Large parts of the city are located in flood prone areas, and also the central parts of the city recently experienced an increasing number of flood events, both of fluvial and pluvial nature. As the economic power and asset values are constantly increasing, this poses a considerable risk for the city. The the aim of this study is to perform a flood hazard analysis considering both fluvial and pluvial floods and to derive probabilistic flood hazard maps. This requires in a first step an understanding of the typical flood mechanisms. Fluvial floods are triggered by a coincidence of high water levels during the annual flood period in the Mekong Delta with high tidal levels, which cause in combination short term inundations in Can Tho. Pluvial floods are triggered by typical tropical convective rain storms during the monsoon season. These two flood pathways are essentially independent in its sources and can thus be treated in the hazard analysis accordingly. For the fluvial hazard analysis we propose a bivariate frequency analysis of the Mekong flood characteristics, the annual maximum flood discharge Q and the annual flood volume V at the upper boundary of the Mekong Delta, the gauging station Kratie. This defines probabilities of exceedance of different Q-V pairs, which are transferred into synthetic flood hydrographs. The synthetic hydrographs are routed through a quasi-2D hydrodynamic model of the entire Mekong Delta in order to provide boundary conditions for a detailed hazard mapping of Can Tho. This downscaling step is necessary, because the huge complexity of the river and channel network does not allow for a proper definition of boundary conditions for Can Tho city by gauge data alone. In addition the available gauge data around Can Tho are too short for a meaningful frequency analysis. The detailed hazard mapping is performed by a 2D hydrodynamic model for Can Tho city. As the scenarios are derived in a Monte-Carlo framework, the final flood hazard maps are probabilistic, i.e. show the median flood hazard along with uncertainty estimates for each defined level of probabilities of exceedance. For the pluvial flood hazard a frequency analysis of the hourly rain gauge data of Can Tho is performed implementing a peak-over-threshold procedure. Based on this frequency analysis synthetic rains storms are generated in a Monte-Carlo framework for the same probabilities of exceedance as in the fluvial flood hazard analysis. Probabilistic flood hazard maps were then generated with the same 2D hydrodynamic model for the city. In a last step the fluvial and pluvial scenarios are combined assuming independence of the events. These scenarios were also transferred into hazard maps by the 2D hydrodynamic model finally yielding combined fluvial-pluvial probabilistic flood hazard maps for Can Tho. The derived set of maps may be used for an improved city planning or a flood risk analysis.

Implementation of health and safety management system to reduce hazardous potential in PT.XYZ Indonesia

NASA Astrophysics Data System (ADS)

Widodo, L.; Adianto; Sartika, D. I.

2017-12-01

PT. XYZ is a large automotive manufacturing company that manufacture, assemble as well as a car exporter. The other products are spare parts, jig and dies. PT. XYZ has long been implementing the Occupational Safety and Health Management System (OSHMS) to reduce the potential hazards that cause work accidents. However, this does not mean that OSHMS that has been implemented does not need to be upgraded and improved. This is due to the potential danger caused by work is quite high. This research was conducted in Sunter 2 Plant where its production activities have a high level of potential hazard. Based on Hazard Identification risk assessment, Risk Assessment, and Risk Control (HIRARC) found 10 potential hazards in Plant Stamping Production, consisting of 4 very high risk potential hazards (E), 5 high risk potential hazards (H), and 1 moderate risk potential hazard (M). While in Plant Casting Production found 22 potential hazards findings consist of 7 very high risk potential hazards (E), 12 high risk potential hazards (H), and 3 medium risk potential hazards (M). Based on the result of Fault Tree Analysis (FTA), the main priority is the high risk potential hazards (H) and very high risk potential hazards (E). The proposed improvement are to make the visual display of the importance of always using the correct Personal Protective Equipment (PPE), establishing good working procedures, conducting OSH training for workers on a regular basis, and continuing to conduct safety campaigns.

Incorporation of in vitro digestive enzymes in an intestinal epithelial cell line model for protein hazard identification.

PubMed

Markell, Lauren K; Wezalis, Stephanie M; Roper, Jason M; Zimmermann, Cindi; Delaney, Bryan

2017-10-01

Relatively few proteins in nature produce adverse effects following oral exposure. Of those that do, effects are often observed in the gut, particularly on intestinal epithelial cells (IEC). Previous studies reported that addition of protein toxins to IEC lines disrupted monolayer integrity but innocuous dietary proteins did not. Studies presented here investigated the effects of innocuous (bovine serum albumin, β-lactoglobulin, RuBisCO, fibronectin) or hazardous (phytohaemagglutinin-E, concanavalin A, wheat germ agglutinin, melittin) proteins that either were untreated or exposed to digestive enzymes prior to addition to Caco-2 human IEC line monolayers. At high concentrations intact fibronectin caused an increase in monolayer permeability but other innocuous proteins did not whether exposed to digestive enzymes or not. In contrast, all untreated hazardous proteins and those that were resistant to digestion (ex. wheat germ agglutinin) disrupted monolayer integrity. However, proteins sensitive to degradation by digestive enzymes (ex. melittin) did not adversely affect monolayers when exposed to these enzymes prior to addition to IEC line monolayers. These results indicate that in vitro exposure of proteins to digestive enzymes can assist in differentiating between innocuous and hazardous proteins as another component to consider in the overall weight of evidence approach in protein hazard assessment. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Understanding the Risk Factors of Trauma Center Closures

PubMed Central

Shen, Yu-Chu; Hsia, Renee Y.; Kuzma, Kristen

2011-01-01

Objectives We analyze whether hazard rates of shutting down trauma centers are higher due to financial pressures or in areas with vulnerable populations (such as minorities or the poor). Materials and Methods This is a retrospective study of all hospitals with trauma center services in urban areas in the continental US between 1990 and 2005, identified from the American Hospital Association Annual Surveys. These data were linked with Medicare cost reports, and supplemented with other sources, including the Area Resource File. We analyze the hazard rates of trauma center closures among several dimensions of risk factors using discrete-time proportional hazard models. Results The number of trauma center closures increased from 1990 to 2005, with a total of 339 during this period. The hazard rate of closing trauma centers in hospitals with a negative profit margin is 1.38 times higher than those hospitals without the negative profit margin (P < 0.01). Hospitals receiving more generous Medicare reimbursements face a lower hazard of shutting down trauma centers (ratio: 0.58, P < 0.01) than those receiving below average reimbursement. Hospitals in areas with higher health maintenance organizations penetration face a higher hazard of trauma center closure (ratio: 2.06, P < 0.01). Finally, hospitals in areas with higher shares of minorities face a higher risk of trauma center closure (ratio: 1.69, P < 0.01). Medicaid load and uninsured populations, however, are not risk factors for higher rates of closure after we control for other financial and community characteristics. Conclusions Our findings give an indication on how the current proposals to cut public spending could exacerbate the trauma closure particularly among areas with high shares of minorities. In addition, given the negative effect of health maintenance organizations on trauma center survival, the growth of Medicaid managed care population should be monitored. Finally, high shares of Medicaid or uninsurance by themselves are not independent risk factors for higher closure as long as financial pressures are mitigated. Targeted policy interventions and further research on the causes, are needed to address these systems-level disparities. PMID:19704354

Understanding the risk factors of trauma center closures: do financial pressure and community characteristics matter?

PubMed

Shen, Yu-Chu; Hsia, Renee Y; Kuzma, Kristen

2009-09-01

We analyze whether hazard rates of shutting down trauma centers are higher due to financial pressures or in areas with vulnerable populations (such as minorities or the poor). This is a retrospective study of all hospitals with trauma center services in urban areas in the continental US between 1990 and 2005, identified from the American Hospital Association Annual Surveys. These data were linked with Medicare cost reports, and supplemented with other sources, including the Area Resource File. We analyze the hazard rates of trauma center closures among several dimensions of risk factors using discrete-time proportional hazard models. The number of trauma center closures increased from 1990 to 2005, with a total of 339 during this period. The hazard rate of closing trauma centers in hospitals with a negative profit margin is 1.38 times higher than those hospitals without the negative profit margin (P < 0.01). Hospitals receiving more generous Medicare reimbursements face a lower hazard of shutting down trauma centers (ratio: 0.58, P < 0.01) than those receiving below average reimbursement. Hospitals in areas with higher health maintenance organizations penetration face a higher hazard of trauma center closure (ratio: 2.06, P < 0.01). Finally, hospitals in areas with higher shares of minorities face a higher risk of trauma center closure (ratio: 1.69, P < 0.01). Medicaid load and uninsured populations, however, are not risk factors for higher rates of closure after we control for other financial and community characteristics. Our findings give an indication on how the current proposals to cut public spending could exacerbate the trauma closure particularly among areas with high shares of minorities. In addition, given the negative effect of health maintenance organizations on trauma center survival, the growth of Medicaid managed care population should be monitored. Finally, high shares of Medicaid or uninsurance by themselves are not independent risk factors for higher closure as long as financial pressures are mitigated. Targeted policy interventions and further research on the causes, are needed to address these systems-level disparities.

Investigation of mechanical properties of kenaf, hemp and E-glass fiber reinforced composites

NASA Astrophysics Data System (ADS)

Dinesh, Veena; Shivanand, H. K.; Vidyasagar, H. N.; Chari, V. Srinivasa

2018-04-01

Recently the use of fiber reinforced polymer composite in the automobile, aerospace overwhelming designing sectors has increased tremendously due to the ecological issues and health hazard possessed by the synthetic fiber during disposal and manufacturing. The paper presents tensile strength, flexural strength and hardness of kenaf-E glass-kenaf, hemp-E glass-hemp and kenaf-E glass-hemp fiber reinforced polyester composites. The composite plates are shaped according to the standard geometry and uni-axially loaded in order to investigate the tensile responses of each combination. In addition to the physical and mechanical properties, processing methods and application of kenaf and hemp fiber composites is also discussed.

THE ROLE OF RISK ASSESSMENT IN ADDRESSING HAZARDOUS WASTE ISSUES

EPA Science Inventory

Risk assessment plays many important roles in addressing hazardous waste issues. In addition to providing a scientific framework and common health metric to evaluate risks. Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA or "Superfund") risk assessm...

Pyroclastic density current hazard maps at Campi Flegrei caldera (Italy): the effects of event scale, vent location and time forecasts.

NASA Astrophysics Data System (ADS)

Bevilacqua, Andrea; Neri, Augusto; Esposti Ongaro, Tomaso; Isaia, Roberto; Flandoli, Franco; Bisson, Marina

2016-04-01

Today hundreds of thousands people live inside the Campi Flegrei caldera (Italy) and in the adjacent part of the city of Naples making a future eruption of such volcano an event with huge consequences. Very high risks are associated with the occurrence of pyroclastic density currents (PDCs). Mapping of background or long-term PDC hazard in the area is a great challenge due to the unknown eruption time, scale and vent location of the next event as well as the complex dynamics of the flow over the caldera topography. This is additionally complicated by the remarkable epistemic uncertainty on the eruptive record, affecting the time of past events, the location of vents as well as the PDCs areal extent estimates. First probability maps of PDC invasion were produced combining a vent-opening probability map, statistical estimates concerning the eruptive scales and a Cox-type temporal model including self-excitement effects, based on the eruptive record of the last 15 kyr. Maps were produced by using a Monte Carlo approach and adopting a simplified inundation model based on the "box model" integral approximation tested with 2D transient numerical simulations of flow dynamics. In this presentation we illustrate the independent effects of eruption scale, vent location and time of forecast of the next event. Specific focus was given to the remarkable differences between the eastern and western sectors of the caldera and their effects on the hazard maps. The analysis allowed to identify areas with elevated probabilities of flow invasion as a function of the diverse assumptions made. With the quantification of some sources of uncertainty in relation to the system, we were also able to provide mean and percentile maps of PDC hazard levels.

Uncovering the historic environmental hazards of urban brownfields.

PubMed

Litt, Jill S; Burke, Thomas A

2002-12-01

In Baltimore, over 1,000 vacant industrial sites persist across its urban landscape, yet little is known about the potential environmental health risks that may undermine future cleanup and redevelopment activities and the health of those in communities near these sites. This study examined the characteristics of urban brownfield properties in southeast Baltimore, Maryland, and screened sites for their potential environmental hazards. In addition, demographic and health data were evaluated to profile the social and health status of those in brownfield communities. The results show that brownfields in southeast Baltimore represent a range of historic operations, including metal smelting, oil refining, warehousing, and transportation, as well as paints, plastics, and metals manufacturing. The screening method identified a range of substances associated with these properties, including heavy metals, chlorinated hydrocarbons, and polycyclic aromatic hydrocarbons, all of which are suspected or recognized toxicants, and many of which are persistent in the environment. Spatially, these sites are concentrated in white, working class neighborhoods in which poverty levels exceed and educational attainment lags behind state and national averages. Moreover, these sites are concentrated in communities in which excess mortality rates due to respiratory disease, cancer, and heart disease exist when compared to the city, state, and national averages. This investigation demonstrated the usefulness of historic archives, real estate records, regulatory files, and national hazard-tracking systems based on standard industrial classification (SIC) to screen brownfield properties for their hazard potential. This analysis provides the foundation for further site monitoring and testing, cleanup and redevelopment priority setting, risk management strategies, and neighborhood planning, and it illustrates the need for increased health surveillance and disease prevention strategies in affected communities.

Fleeing to Fault Zones: Incorporating Syrian Refugees into Earthquake Risk Analysis along the East Anatolian and Dead Sea Rift Fault Zones

NASA Astrophysics Data System (ADS)

Wilson, B.; Paradise, T. R.

2016-12-01

The influx of millions of Syrian refugees into Turkey has rapidly changed the population distribution along the Dead Sea Rift and East Anatolian Fault zones. In contrast to other countries in the Middle East where refugees are accommodated in camp environments, the majority of displaced individuals in Turkey are integrated into cities, towns, and villages—placing stress on urban settings and increasing potential exposure to strong shaking. Yet, displaced populations are not traditionally captured in data sources used in earthquake risk analysis or loss estimations. Accordingly, we present a district-level analysis assessing the spatial overlap of earthquake hazards and refugee locations in southeastern Turkey to determine how migration patterns are altering seismic risk in the region. Using migration estimates from the U.S. Humanitarian Information Unit, we create three district-level population scenarios that combine official population statistics, refugee camp populations, and low, median, and high bounds for integrated refugee populations. We perform probabilistic seismic hazard analysis alongside these population scenarios to map spatial variations in seismic risk between 2011 and late 2015. Our results show a significant relative southward increase of seismic risk for this period due to refugee migration. Additionally, we calculate earthquake fatalities for simulated earthquakes using a semi-empirical loss estimation technique to determine degree of under-estimation resulting from forgoing migration data in loss modeling. We find that including refugee populations increased casualties by 11-12% using median population estimates, and upwards of 20% using high population estimates. These results communicate the ongoing importance of placing environmental hazards in their appropriate regional and temporal context which unites physical, political, cultural, and socio-economic landscapes. Keywords: Earthquakes, Hazards, Loss-Estimation, Syrian Crisis, Migration, Refugees

Tactile Approaches for Teaching Blind and Visually-Impaired Students in the Geosciences

NASA Astrophysics Data System (ADS)

Permenter, J. L.; Runyon, C.

2003-12-01

Hearing and touch are perhaps the two most important senses for teaching visually-impaired students in any context. Classroom lectures obviously emphasize the auditory aspects of learning, while touch is often relegated to either Braille texts or raised--line drawings for illustrative figures. From the student's perspective, some lecture topics, especially in the sciences, can be a challenge to grasp without additional stimuli. Geosciences have a distinct visual component that can be lost when teaching blind or visually-impaired students, particularly in the study of geomorphology and landform change. As an example, the matters raised concerning volcanic hazards can be difficult to envision without due attention to the limitations of visually-impaired students. Here, we suggest an example of a tactile approach for introducing the study of volcanoes and the hazards associated with them. Large, visually-stimulating images of a volcanic, populated region in southern Peru are supplied for those students who have poor but extant visual acuity, while precise, clay-based models of the region complement the images for those students, as well as for students who have no visual ability whatsoever. We use a model of the terrestrial volcano El Misti and the nearby city of Arequipa, Peru, to directly reflect the volcanic morphology and hazardous aspects of the terrain. The use of computer-generated digital elevation models from remote sensing imaging systems allows accurate replication of the regional topography. Instructors are able to modify these clay models to illustrate spatial and temporal changes in the region, allowing students to better grasp potential geological and geographical transformations over time. The models spawn engaging class discussions and help with designing hazard mitigation protocols.

Relationship between heart failure, concurrent chronic obstructive pulmonary disease and beta-blocker use: a Danish nationwide cohort study.

PubMed

Sessa, Maurizio; Mascolo, Annamaria; Mortensen, Rikke Nørmark; Andersen, Mikkel Porsborg; Rosano, Giuseppe Massimo Claudio; Capuano, Annalisa; Rossi, Francesco; Gislason, Gunnar; Enghusen-Poulsen, Henrik; Torp-Pedersen, Christian

2018-03-01

To compare the hazard of all-cause, chronic obstructive pulmonary disease (COPD) and heart failure (HF) hospitalization in carvedilol vs. metoprolol/bisoprolol/nebivolol users with COPD and concurrent HF from 2009 to 2012, and to evaluate the use and persistence in treatment of these β-blockers, their impact on the risk of COPD-related hospitalization, and the factors important for their selection. Cox and logistic regression were used for both unadjusted and adjusted analyses. Carvedilol users had a higher hazard of being hospitalized for HF compared with metoprolol/bisoprolol/nebivolol users in both the unadjusted [hazard ratio (HR) 1.74; 95% confidence interval (CI) 1.65-1.83] and adjusted (HR 1.61; 95% CI 1.52-1.70) analyses. No significant differences were found for all-cause and COPD hospitalization between the two groups. Carvedilol users had a significant lower restricted mean persistence time than metoprolol/bisoprolol/nebivolol users. Patients exposed to carvedilol had an odds ratio (OR) of 1.38 (95% CI 1.23-1.56) for being hospitalized due to COPD within 60 days after redeeming the first carvedilol prescription, which was similar to that observed in metoprolol/bisoprolol/nebivolol users (OR 1.37; 95% CI 1.27-1.48). Patients with concurrent chronic kidney disease had a higher probability of receiving carvedilol (OR 1.16; 95% CI 1.04-1.29). Carvedilol prescription carried an increased hazard of HF hospitalization and lower restricted mean persistence time among patients with COPD and concurrent HF. Additionally, we found a widespread phenomenon of carvedilol prescription at variance with the European Society of Cardiology guidelines and potential for improving the proportion of patients treated with β-blockers. © 2017 The Authors. European Journal of Heart Failure © 2017 European Society of Cardiology.

Prospects and pitfalls of occupational hazard mapping: 'between these lines there be dragons'.

PubMed

Koehler, Kirsten A; Volckens, John

2011-10-01

Hazard data mapping is a promising new technique that can enhance the process of occupational exposure assessment and risk communication. Hazard maps have the potential to improve worker health by providing key input for the design of hazard intervention and control strategies. Hazard maps are developed with aid from direct-reading instruments, which can collect highly spatially and temporally resolved data in a relatively short period of time. However, quantifying spatial-temporal variability in the occupational environment is not a straightforward process, and our lack of understanding of how to ascertain and model spatial and temporal variability is a limiting factor in the use and interpretation of workplace hazard maps. We provide an example of how sources of and exposures to workplace hazards may be mischaracterized in a hazard map due to a lack of completeness and representativeness of collected measurement data. Based on this example, we believe that a major priority for research in this emerging area should focus on the development of a statistical framework to quantify uncertainty in spatially and temporally varying data. In conjunction with this need is one for the development of guidelines and procedures for the proper sampling, generation, and evaluation of workplace hazard maps.

Characterizing the nature and variability of avalanche hazard in western Canada

NASA Astrophysics Data System (ADS)

Shandro, Bret; Haegeli, Pascal

2018-04-01

The snow and avalanche climate types maritime, continental and transitional are well established and have been used extensively to characterize the general nature of avalanche hazard at a location, study inter-seasonal and large-scale spatial variabilities and provide context for the design of avalanche safety operations. While researchers and practitioners have an experience-based understanding of the avalanche hazard associated with the three climate types, no studies have described the hazard character of an avalanche climate in detail. Since the 2009/2010 winter, the consistent use of Statham et al. (2017) conceptual model of avalanche hazard in public avalanche bulletins in Canada has created a new quantitative record of avalanche hazard that offers novel opportunities for addressing this knowledge gap. We identified typical daily avalanche hazard situations using self-organizing maps (SOMs) and then calculated seasonal prevalence values of these situations. This approach produces a concise characterization that is conducive to statistical analyses, but still provides a comprehensive picture that is informative for avalanche risk management due to its link to avalanche problem types. Hazard situation prevalence values for individual seasons, elevations bands and forecast regions provide unprecedented insight into the inter-seasonal and spatial variability of avalanche hazard in western Canada.

Modeling the Risk of Fire/Explosion Due to Oxidizer/Fuel Leaks in the Ares I Interstage

NASA Technical Reports Server (NTRS)

Ring, Robert W.; Stott, James E.; Hales, Christy

2008-01-01

A significant flight hazard associated with liquid propellants, such as those used in the upper stage of NASA's new Ares I launch vehicle, is the possibility of leakage of hazardous fluids resulting in a catastrophic fire/explosion. The enclosed and vented interstage of the Ares I contains numerous oxidizer and fuel supply lines as well as ignition sources. The potential for fire/explosion due to leaks during ascent depends on the relative concentrations of hazardous and inert fluids within the interstage along with other variables such as pressure, temperature, leak rates, and fluid outgasing rates. This analysis improves on previous NASA Probabilistic Risk Assessment (PRA) estimates of the probability of deflagration, in which many of the variables pertinent to the problem were not explicitly modeled as a function of time. This paper presents the modeling methodology developed to analyze these risks.

[Risk, cause and disease in the occupational environment. Neurologic risk factors].

PubMed

Maqueda-Blasco, J

In this paper we study the epidemiological criteria and those of etiological investigation which should be considered when analysing and investigating problems with health due to exposure to occupational hazards, with special attention to neurological damage due to chemical or physical contamination or to the ergonometric requirements of the task. We define the part played by occupational hazards in causing disease both professional and related to other occupations. The different preventive models used in the history of prevention of professional hazards are analysed. Particular attention is paid to the so-called socio-technical model which considers illness as dysfunction of the relation man/work. The neurological risk factors are analysed separately; therefore we emphasize the different neurotoxic chemicals, physical and ergonomic agents (the latter may be considered a pandemic in the workplace), and we establish the relationships with the main clinical and functional disorders of the central and peripheral nervous systems and the musculoskeletal system.

Treatment of petroleum hydrocarbon polluted environment through bioremediation: a review.

PubMed

Singh, Kriti; Chandra, Subhash

2014-01-01

Bioremediation play key role in the treatment of petroleum hydrocarbon contaminated environment. Exposure of petroleum hydrocarbon into the environment occurs either due to human activities or accidentally and cause environmental pollution. Petroleum hydrocarbon cause many toxic compounds which are potent immunotoxicants and carcinogenic to human being. Remedial methods for the treatment of petroleum contaminated environment include various physiochemical and biological methods. Due to the negative consequences caused by the physiochemical methods, the bioremediation technology is widely adapted and considered as one of the best technology for the treatment of petroleum contaminated environment. Bioremediation utilizes the natural ability of microorganism to degrade the hazardous compound into simpler and non hazardous form. This paper provides a review on the role of bioremediation in the treatment of petroleum contaminated environment, discuss various hazardous effects of petroleum hydrocarbon, various factors influencing biodegradation, role of various enzymes in biodegradation and genetic engineering in bioremediation.

Intrinsic vulnerability, hazard and risk mapping for karst aquifers: A case study

NASA Astrophysics Data System (ADS)

Mimi, Ziad A.; Assi, Amjad

2009-01-01

SummaryGroundwater from karst aquifers is among the most important resources of drinking water supply of the worldwide population. The European COST action 620 proposed a comprehensive approach to karst groundwater protection, comprising methods of intrinsic and specific vulnerability mapping, hazard and risk mapping. This paper presents the first application of all components of this European approach to the groundwater underlying the Ramallah district, a karst hydrogeology system in Palestine. The vulnerability maps which were developed can assist in the implementation of groundwater management strategies to prevent degradation of groundwater quality. Large areas in the case study area can be classified as low or very low risk area corresponding to the pollution sources due to the absence of hazards and also due to low vulnerabilities. These areas could consequently be interesting for future development as they are preferable in view of ground water protection.

Sexual Victimization and Hazardous Drinking Among Heterosexual and Sexual Minority Women

PubMed Central

Szalacha, Laura A.; Johnson, Timothy P.; Kinnison, Kelly E.; Wilsnack, Sharon C.; Cho, Young

2010-01-01

Aims Although research shows that sexual minority women report high rates of lifetime sexual victimization and high rates of hazardous drinking, investigators have yet to explore the relationships between sexual victimization and hazardous drinking in this population. In addition, because rates of these problems may vary within the sexual minority population, we examined and compared relationships between sexual victimization and hazardous drinking in exclusively heterosexual and sexual minority (mostly heterosexual, bisexual, mostly lesbian and exclusively lesbian) women. Method Data from 548 participants in the National Study of Health and Life Experiences of Women and 405 participants in the Chicago Health and Life Experiences of Women study were pooled to address these relationships. We compared hazardous drinking, childhood sexual abuse (CSA), adult sexual assault (ASA), and revictimization (both CSA and ASA) across the five sexual identity subgroups. We then fit a multilevel general linear model to examine group differences in the relationships between hazardous drinking and sexual victimization and to test for potential interactions between victimization and identity on hazardous drinking. Results Sexual minority women reported higher levels of hazardous drinking and higher rates of CSA and sexual revictimization than did exclusively heterosexual women. Revictimization was the strongest predictor of hazardous drinking among women who identified as mostly heterosexual and mostly lesbian. Conclusions This study extends previous research by examining associations between sexual victimization and hazardous drinking in heterosexual and sexual minority women and by exploring within-group variations in these associations among sexual minority women. Higher rates of lifetime sexual victimization and revictimization may help to explain sexual minority women’s heightened risk for hazardous drinking. The findings highlight the need for additional research that examines the meanings of sexual identity labels to more fully understand differences in risk within groups of sexual minority women as well as how sexual identity may affect responses to and interpretations of sexual victimization. PMID:20692771

Utah Flooding Hazard: Raising Public Awareness through the Creation of Multidisciplinary Web-Based Maps

NASA Astrophysics Data System (ADS)

Castleton, J.; Erickson, B.; Bowman, S. D.; Unger, C. D.

2014-12-01

The Utah Geological Survey's (UGS) Geologic Hazards Program has partnered with the U.S. Army Corps of Engineers to create geologically derived web-based flood hazard maps. Flooding in Utah communities has historically been one of the most damaging geologic hazards. The most serious floods in Utah have generally occurred in the Great Salt Lake basin, particularly in the Weber River drainage on the western slopes of the Wasatch Range, in areas of high population density. With a growing population of 2.9 million, the state of Utah is motivated to raise awareness about the potential for flooding. The process of increasing community resiliency to flooding begins with identification and characterization of flood hazards. Many small communities in areas experiencing rapid growth have not been mapped completely by the Federal Emergency Management Agency (FEMA) Flood Insurance Rate Maps (FIRM). Existing FIRM maps typically only consider drainage areas that are greater than one square mile in determining flood zones and do not incorporate geologic data, such as the presence of young, geologically active alluvial fans that indicate a high potential for debris flows and sheet flooding. Our new flood hazard mapping combines and expands on FEMA data by incorporating mapping derived from 1:24,000-scale UGS geologic maps, LiDAR data, digital elevation models, and historical aerial photography. Our flood hazard maps are intended to supplement the FIRM maps to provide local governments and the public with additional flood hazard information so they may make informed decisions, ultimately reducing the risk to life and property from flooding hazards. Flooding information must be widely available and easily accessed. One of the most effective ways to inform the public is through web-based maps. Web-based flood hazard maps will not only supply the public with the flood information they need, but also provides a platform to add additional geologic hazards to an easily accessible format.

Development of a methodology to assess man-made risks in Germany

NASA Astrophysics Data System (ADS)

Borst, D.; Jung, D.; Murshed, S. M.; Werner, U.

2006-09-01

Risk is a concept used to describe future potential outcomes of certain actions or events. Within the project "CEDIM - Risk Map Germany - Man-made Hazards" it is intended to develop methods for assessing and mapping the risk due to different human-induced hazards. This is a task that has not been successfully performed for Germany so far. Concepts of catastrophe modelling are employed including the spatial modelling of hazard, the compilation of different kinds of exposed elements, the estimation of their vulnerability and the direct loss potential in terms of human life and health. The paper is divided in two sections: First, an analytic framework for assessing the broad spectrum of human-induced risks is introduced. This approach is then applied for three important types of human-induced hazards that are representative for a whole class of hazards: Accidents due to nuclear power plants (NPP) or air traffic, and terrorism. For the analysis of accidents, risk is measured with respect to getting injured or dying when living in certain buffer zones around hazard locations. NPP hazard expert knowledge is used and supplemented with observations on aging effects leading to a proprietary index value for the risk. Air traffic risk is modelled as an area related phenomenon based on available accident statistics leading to an expected value of risk. Terrorism risk is assessed by the attraction certain elements (like embassies in the case of conventional threats) display in the eye of potential aggressors. For non-conventional targets like football games, a detailed approach measuring their susceptibility to different kinds of attacks within predefined scenarios was developed; this also allows a ranking of attack modes.

Managing Temporary School Closure Due to Environmental Hazard: Lessons from New Zealand

ERIC Educational Resources Information Center

Stuart, Kathy L.; Patterson, Lesley G.; Johnston, David M.; Peace, Robin

2013-01-01

The February 2011 Canterbury earthquake was a dramatic reminder of the need for schools to have emergency management plans in place. A number of other disaster and hazard events have historically caused New Zealand schools to close temporarily, and often within a short time frame. At such times principals must act decisively and communicate…

Application of probabilistic risk assessment: Evaluating remedial alternatives at the Portland Harbor Superfund Site, Portland, Oregon, USA.

PubMed

Ruffle, Betsy; Henderson, James; Murphy-Hagan, Clare; Kirkwood, Gemma; Wolf, Frederick; Edwards, Deborah A

2018-01-01

A probabilistic risk assessment (PRA) was performed to evaluate the range of potential baseline and postremedy health risks to fish consumers at the Portland Harbor Superfund Site (the "Site"). The analysis focused on risks of consuming fish resident to the Site containing polychlorinated biphenyls (PCBs), given that this exposure scenario and contaminant are the primary basis for US Environmental Protection Agency's (USEPA's) selected remedy per the January 2017 Record of Decision (ROD). The PRA used probability distributions fit to the same data sets used in the deterministic baseline human health risk assessment (BHHRA) as well as recent sediment and fish tissue data to evaluate the range and likelihood of current baseline cancer risks and noncancer hazards for anglers. Areas of elevated PCBs in sediment were identified on the basis of a geospatial evaluation of the surface sediment data, and the ranges of risks and hazards associated with pre- and postremedy conditions were calculated. The analysis showed that less active remediation (targeted to areas with the highest concentrations) compared to the remedial alternative selected by USEPA in the ROD can achieve USEPA's interim risk management benchmarks (cancer risk of 10 -4 and noncancer hazard index [HI] of 10) immediately postremediation for the vast majority of subsistence anglers that consume smallmouth bass (SMB) fillet tissue. In addition, the same targeted remedy achieves USEPA's long-term benchmarks (10 -5 and HI of 1) for the majority of recreational anglers. Additional sediment remediation would result in negligible additional risk reduction due to the influence of background. The PRA approach applied here provides a simple but adaptive framework for analysis of risks and remedial options focused on variability in exposures. It can be updated and refined with new data to evaluate and reduce uncertainty, improve understanding of the Site and target populations, and foster informed remedial decision making. Integr Environ Assess Manag 2018;14:63-78. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Environmental hazards and distribution of radioactive black sand along the Rosetta coastal zone in Egypt using airborne spectrometric and remote sensing data.

PubMed

Kaiser, M F; Aziz, A M; Ghieth, B M

2014-11-01

High-resolution airborne gamma ray spectrometry, conducted in 2003, was used to estimate radioactive elements spatial abundance along the Rosetta coastal zone area. It was noticed that both Uranium and Thorium are concentrated in the black sand deposits along the beach. In contrary, Potassium was observed in high level abundance at the cultivated Nile Delta lands due to the accumulated usage of fertilizers. Exposure Rate (ER), Absorbed Dose Rate (ADR) and Annual Effective Dose Rate (AEDR) were calculated to evaluate the radiation background influence in human. Results indicated that the human body in the study sites is subjected to radiation hazards exceeds the accepted limit for long duration exposure. In addition, the areas covered by the highest concentration of Uranium and Thorium show the highest level of radiogenic heat production. Detection the environmental hazards of the radioactive black sands in the study site encouraged this research to monitor the spatial and temporal distribution of these sediments. The Landsat Thematic Mapper images acquired in 1990, 2003 and 2013 were analyzed using remote sensing image processing techniques. Image enhancements, classification and changes detection indicated a positive significant relationship between the patterns of coastline changes and distribution of the radioactive black sand in the study sites. The radioactive black sands are usually concentrated in the eroded areas. Therefore, in 1990 high concentration of the radioactive black sands were observed along the eastern and western flanks of the Rosetta promontory. Distribution of these sediments decreased due to the construction of the protective sea walls. Most of the radioactive black sands are transported toward the east in Abu Khashaba bay under the effect of the longshore currents and toward the west in Alexandria and Abu Quir bay under the action of the seasonal reverse currents. Copyright © 2014 Elsevier Ltd. All rights reserved.

Avalanche risk assessment - a multi-temporal approach, results from Galtür, Austria

NASA Astrophysics Data System (ADS)

Keiler, M.; Sailer, R.; Jörg, P.; Weber, C.; Fuchs, S.; Zischg, A.; Sauermoser, S.

2006-07-01

Snow avalanches pose a threat to settlements and infrastructure in alpine environments. Due to the catastrophic events in recent years, the public is more aware of this phenomenon. Alpine settlements have always been confronted with natural hazards, but changes in land use and in dealing with avalanche hazards lead to an altering perception of this threat. In this study, a multi-temporal risk assessment is presented for three avalanche tracks in the municipality of Galtür, Austria. Changes in avalanche risk as well as changes in the risk-influencing factors (process behaviour, values at risk (buildings) and vulnerability) between 1950 and 2000 are quantified. An additional focus is put on the interconnection between these factors and their influence on the resulting risk. The avalanche processes were calculated using different simulation models (SAMOS as well as ELBA+). For each avalanche track, different scenarios were calculated according to the development of mitigation measures. The focus of the study was on a multi-temporal risk assessment; consequently the used models could be replaced with other snow avalanche models providing the same functionalities. The monetary values of buildings were estimated using the volume of the buildings and average prices per cubic meter. The changing size of the buildings over time was inferred from construction plans. The vulnerability of the buildings is understood as a degree of loss to a given element within the area affected by natural hazards. A vulnerability function for different construction types of buildings that depends on avalanche pressure was used to assess the degree of loss. No general risk trend could be determined for the studied avalanche tracks. Due to the high complexity of the variations in risk, small changes of one of several influencing factors can cause considerable differences in the resulting risk. This multi-temporal approach leads to better understanding of the today's risk by identifying the main changes and the underlying processes. Furthermore, this knowledge can be implemented in strategies for sustainable development in Alpine settlements.

Sandia National Laboratories Small-Scale Sensitivity Testing (SSST) Report: Calcium Nitrate Mixtures with Various Fuels.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, Jason Joe

Based upon the presented sensitivity data for the examined calcium nitrate mixtures using sugar and sawdust, contact handling/mixing of these materials does not present hazards greater than those occurring during handling of dry PETN powder. The aluminized calcium nitrate mixtures present a known ESD fire hazard due to the fine aluminum powder fuel. These mixtures may yet present an ESD explosion hazard, though this has not been investigated at this time. The detonability of these mixtures will be investigated during Phase III testing.

Structural estimation of a principal-agent model: moral hazard in medical insurance.

PubMed

Vera-Hernández, Marcos

2003-01-01

Despite the importance of principal-agent models in the development of modern economic theory, there are few estimations of these models. I recover the estimates of a principal-agent model and obtain an approximation to the optimal contract. The results show that out-of-pocket payments follow a concave profile with respect to costs of treatment. I estimate the welfare loss due to moral hazard, taking into account income effects. I also propose a new measure of moral hazard based on the conditional correlation between contractible and noncontractible variables.

Development of Hazards Classification Data on Propellants and Explosives

DTIC Science & Technology

1978-11-01

scattering photometer. A near forward, dark field instrument called a Sinclair-Phoenix photometer is common- ly used for measuring a wide range of...hazardä classification pro- cedure for in-process materials, and 5) Experimental evaluation of selected small-scale tests for application in the hazards...responsible for the experimental por- tion of this work. In addition to the authors, other IITRI personnel who contributed to this program were R

Natural radiation hazards on the manned Mars mission

NASA Technical Reports Server (NTRS)

Letaw, John R.; Silberberg, Rein; Tsao, C. H.

1986-01-01

The hazards of the natural radiation environment (cosmic rays and solar energetic particles) on a manned mission to Mars are considered. These hazards are addressed in three different settings: the flight to Mars where the astronauts are shielded only by the spacecraft; on the surface of Mars under an atmosphere of about 10 g/sq cm carbon dioxide; and under the surface of Mars where additional shielding would result.

GIS thematic layers for assessing karst hazard in Murgia region (Italy)

NASA Astrophysics Data System (ADS)

Canora, Filomena; D'Angella, Annachiara; Fidelibus, Dolores; Lella, Angela; Pellicani, Roberta; Spilotro, Giuseppe

2013-04-01

The assessment of karst hazard in a carbonate area may be somewhat complex for the multiplicity of involved factors (geological, hydrological, morphological, anthropogenic, etc.), their history and the slow rate of evolution of the processes. In coastal areas, moreover, the long term sea level variations and the short term oscillations generally influence the generation and evolution of the karst process. Another peculiarity of the karst hazard assessment consists in the difficulty for identifying the location of subsurface forms, which may develop over very large areas without any kind of surface signal. The karst processes and landforms often require specific methods of investigation and mitigation, due to the unique and highly variable characters of karst environments. In addition, the hidden character of the karst processes, often accelerated by human activity, is an issue with significant economic impact, affecting many regions of the world. The assessment of karst hazard in the Murgia plateau (in central-west of Apulia region) is the main goal of this research. For this aim, the typologies of karst phenomena, able to produce hazard in the study area, were individuated and collected in a specific database. The hazard was evaluated on the basis of the probability of occurrence of a phenomenon of instability, active (produced by human activities) or passive (natural evolution of karst process), in relation to the presence, evolution or generation of karst forms on surface or at critical distance from the surface. The critical distance from the surface is defined as the distance at which the local or general destructive evolution of a karst process can produce a variation of the usability of the area or of the value of elements involved in the instability. The thematic layers relative to the factors influencing karst processes and landforms (doline, sinkholes, polje, lame, gravine, caves) were elaborated and managed in a GIS system. The archives of the main karst landforms were reviewed by crossing different cartographic information. Appropriated spatial buffers were defined around the landforms, according to the type of karst phenomenon and to the elevation of the karst forms, as recognized by previous researches. Finally, the karst hazard map was obtained by using an heuristic model that includes all the basic thematic layers.

Learning lessons from Natech accidents - the eNATECH accident database

NASA Astrophysics Data System (ADS)

Krausmann, Elisabeth; Girgin, Serkan

2016-04-01

When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of equipment vulnerability models linking the natural-hazard severity to the observed damage almost impossible. As a consequence, the European Commission has set up the eNATECH database for the systematic collection of Natech accident data and near misses. The database exhibits the more sophisticated accident representation required to capture the characteristics of Natech events and is publicly accessible at http://enatech.jrc.ec.europa.eu. This presentation outlines the general lessons-learning process, introduces the eNATECH database and its specific structure, and discusses natural-hazard specific lessons learned and features common to Natech accidents triggered by different natural hazards.

Natural hazard risk assessment and management in the Matter valley, Swiss Alps

NASA Astrophysics Data System (ADS)

Herz, T.; King, L.; Philippi, S.

2003-04-01

The Matter valley has a length of about 40 km and is surrounded by some of the highest peaks of the Alps resulting in extreme altitudinal differences and a continental character of the climate. These climatic conditions cause a high glacier equilibrium line and therefore a periglacial belt of a large vertical extend. Due to the high relief energy, all kinds of natural hazards typical for high mountain environments occur. The steep western slopes are dominated by rockfalls, slope instabilities in bedrock and avalanches. A widespread cover of unconsolidated sediments on the eastern slopes induces landslides and debris flows, which often reach down to the valley bottom where they can dam up the river. Increasing population and modern land use forms required a more and more sensitive attitude towards natural hazard potentials in this endangered area. Assessment and management of natural hazard risks have been much improved during the last fifteen years and increasing amounts of money are spent each year in order to safeguard settlements, traffic lines, and other objects of the technical infrastructure. Numerous investigations concerning natural hazard risks have been made and the results are considered in the actual land use planning of the Canton. The planning law of the Canton Valais defines risk zones as areas, which are endangered by natural hazards like avalanches, rockfalls, landslides and floodings. Risk assessment is done by overview maps (scale 1:25,000) which are specified by detailed risk analyses consisting of registers and detailed maps (scale 1:2,000 to 1:10,000). These analyses are integrated in the land zoning by defining zones of high, medium and low danger, associated with corresponding prohibitions, restrictions and conditions for utilisation. At present, the incorporation of the avalanche and rockfall register in local zoning plans is completed in most communities of the Canton Valais. An additional inventory of 200 slope instabilities was elaborated and must be considered in present and future local zonation updates. However, zones threatened by floods are only indicated on maps of overview and no planning standards for the management of debris flow hazards exist so far. The Canton is currently carrying out numerous projects of active disaster prevention comprising measurements and constructional precautions against avalanches and slope instabilities as well as monitoring systems and early warning stations.

Detecting buried explosive hazards with handheld GPR and deep learning

NASA Astrophysics Data System (ADS)

Besaw, Lance E.

2016-05-01

Buried explosive hazards (BEHs), including traditional landmines and homemade improvised explosives, have proven difficult to detect and defeat during and after conflicts around the world. Despite their various sizes, shapes and construction material, ground penetrating radar (GPR) is an excellent phenomenology for detecting BEHs due to its ability to sense localized differences in electromagnetic properties. Handheld GPR detectors are common equipment for detecting BEHs because of their flexibility (in part due to the human operator) and effectiveness in cluttered environments. With modern digital electronics and positioning systems, handheld GPR sensors can sense and map variation in electromagnetic properties while searching for BEHs. Additionally, large-scale computers have demonstrated an insatiable appetite for ingesting massive datasets and extracting meaningful relationships. This is no more evident than the maturation of deep learning artificial neural networks (ANNs) for image and speech recognition now commonplace in industry and academia. This confluence of sensing, computing and pattern recognition technologies offers great potential to develop automatic target recognition techniques to assist GPR operators searching for BEHs. In this work deep learning ANNs are used to detect BEHs and discriminate them from harmless clutter. We apply these techniques to a multi-antennae, handheld GPR with centimeter-accurate positioning system that was used to collect data over prepared lanes containing a wide range of BEHs. This work demonstrates that deep learning ANNs can automatically extract meaningful information from complex GPR signatures, complementing existing GPR anomaly detection and classification techniques.

40 CFR 267.1103 - What additional design and operating standards apply if liquids will be in my containment building?

Code of Federal Regulations, 2011 CFR

2011-07-01

... the migration of hazardous constituents into the barrier (for example, a geomembrane covered by a... containment system, including a secondary barrier designed and constructed to prevent migration of hazardous...

40 CFR 267.1103 - What additional design and operating standards apply if liquids will be in my containment building?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the migration of hazardous constituents into the barrier (for example, a geomembrane covered by a... containment system, including a secondary barrier designed and constructed to prevent migration of hazardous...

Identifying chemicals of concern in hydraulic fracturing fluids used for oil production.

PubMed

Stringfellow, William T; Camarillo, Mary Kay; Domen, Jeremy K; Sandelin, Whitney L; Varadharajan, Charuleka; Jordan, Preston D; Reagan, Matthew T; Cooley, Heather; Heberger, Matthew G; Birkholzer, Jens T

2017-01-01

Chemical additives used for hydraulic fracturing and matrix acidizing of oil reservoirs were reviewed and priority chemicals of concern needing further environmental risk assessment, treatment demonstration, or evaluation of occupational hazards were identified. We evaluated chemical additives used for well stimulation in California, the third largest oil producing state in the USA, by the mass and frequency of use, as well as toxicity. The most frequently used chemical additives in oil development were gelling agents, cross-linkers, breakers, clay control agents, iron and scale control agents, corrosion inhibitors, biocides, and various impurities and product stabilizers used as part of commercial mixtures. Hydrochloric and hydrofluoric acids, used for matrix acidizing and other purposes, were reported infrequently. A large number and mass of solvents and surface active agents were used, including quaternary ammonia compounds (QACs) and nonionic surfactants. Acute toxicity was evaluated and many chemicals with low hazard to mammals were identified as potentially hazardous to aquatic environments. Based on an analysis of quantities used, toxicity, and lack of adequate hazard evaluation, QACs, biocides, and corrosion inhibitors were identified as priority chemicals of concern that deserve further investigation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Potential primary and secondary hazards of avicides

USGS Publications Warehouse

Schafer, E.W.; Clark, Dell O.

1984-01-01

There are six chemicals or groups of chemicals that are currently registered as avicides that can be used in some or all of the U.S. Most of these chemicals, because of their diverse chemical composition and innate toxicological effects, present somewhat different primary and secondary hazards to avian and mammalian predators and scavengers. Of the chemicals reviewed, all appear to present some degree of primary hazard to non-target birds and mammals; however, PA-14, the Starlicide family of chemicals and fenthion appear to be the least hazardous when used according to use directions. 4-Aminopyridine, endrin and strychnine, because of their high acute toxicity and lack of selectivity, must be considered potentially more hazardous. With respect to secondary hazards, the ranking of chemicals changes considerably and only PA-14 appears to present a negligible hazard. The Starlicide family of chemicals presents negligible hazards to most animal species under currently registered uses, but may be potentially hazardous to cats and owls under specific use conditions. Two chemicals, 4-aminopyridine and strychnine, are potentially more hazardous to predatory and scavenger animals due to their highly toxic nature and rapid lethal effects in target species, leaving unassimilated chemical in the gastrointestinal tract. The remaining chemicals, endrin and fenthion, have been shown to possess the potential for more significant secondary poisoning; however, because of restrictive uses, most of the potential hazards have been avoided in operational use.

Perception of Natural Hazards and Risk among University of Washington Students

NASA Astrophysics Data System (ADS)

Herr, K.; Brand, B.; Hamlin, N.; Ou, J.; Thomas, B.; Tudor, E.

2012-12-01

Familiarity with a given population's perception of natural hazards and the threats they present is vital for the development of effective education prior to and emergency management response after a natural event. While much work has been done in other active tectonic regions, perception of natural hazards and risk among Pacific Northwest (PNW) residents is poorly constrained. The objective of this work is to assess the current perception of earthquake and volcanic hazards and risk in the PNW, and to better understand the factors which drive the public's behavior concerning preparedness and response. We developed a survey to assess the knowledge of natural hazards common to the region, their perception of risk concerning these hazards, and their level of preparedness should a natural hazard occur. The survey was distributed to University of Washington students and employees via an internet link as part of a class project in 'Living with Volcanoes' (ESS 106) in March of 2012, which returned more than 900 responses. The UW student population was chosen as our first "population" to assess because of their uniqueness as a large, semi-transient population (typical residence of less than 5 years). Only 50% of participants correctly reported their proximity to an active volcano, indicating either lack of knowledge of active volcanoes in the region or poor spatial awareness. When asked which area were most at risk to lahars, respondents indicated that all areas close to the hazard source, including topographically elevated regions, were at a higher risk than more distal and low-lying localities that are also at high risk, indicating a lack of knowledge concerning the topographic dependency of this hazard. Participants perceived themselves to be able to cope better with an earthquake than a volcanic event. This perception may be due to lack of knowledge of volcanic hazards and their extent or due to a false sense of security concerning earthquakes fostered by regular earthquake drills and long periods of quiescence between large earthquake events. 60% of respondents had participated in earthquake drills; however, less than 45% provided the correct response when asked what they would do if an earthquake were to occur. In summary, knowledge of natural hazards and proximity to hazard sources was found to be low or inaccurate, which corresponds to a low perception of risk. Awareness of evacuation routes, emergency response or coping protocol for natural hazards was also found to be low, suggesting this large, semi-transient population lacks the understanding of proper preparation and response to a natural hazard. These results indicate the need for better education concerning the risks of natural hazards in this region and the steps for better preparedness.

Multi-hazards risk assessment at different levels

NASA Astrophysics Data System (ADS)

Frolova, N.; Larionov, V.; Bonnin, J.

2012-04-01

Natural and technological disasters are becoming more frequent and devastating. Social and economic losses due to those events increase annually, which is definitely in relation with evolution of society. Natural hazards identification and analysis, as well natural risk assessment taking into account secondary technological accidents are the first steps in prevention strategy aimed at saving lives and protecting property against future events. The paper addresses methodological issues of natural and technological integrated risk assessment and mapping at different levels [1, 2]. At the country level the most hazardous natural processes, which may results in fatalities, injuries and economic loss in the Russian Federation, are considered. They are earthquakes, landslides, mud flows, floods, storms, avalanches. The special GIS environment for the country territory was developed which includes information about hazards' level and reoccurrence, an impact databases for the last 20 years, as well as models for estimating damage and casualties caused by these hazards. Federal maps of seismic individual and collective risk, as well as multi-hazards natural risk maps are presented. The examples of regional seismic risk assessment taking into account secondary accidents at fire, explosion and chemical hazardous facilities and regional integrated risk assessment are given for the earthquake prone areas of the Russian Federation. The paper also gives examples of loss computations due to scenario earthquakes taking into account accidents trigged by strong events at critical facilities: fire and chemical hazardous facilities, including oil pipe lines routes located in the earthquake prone areas. The estimations of individual seismic risk obtained are used by EMERCOM of the Russian Federation, as well as by other federal and local authorities, for planning and implementing preventive measures, aimed at saving lives and protecting property against future disastrous events. The results also allow to develop effective emergency response plans taking into account possible scenario events. Taking into consideration the size of the oil pipe line systems located in the highly active seismic zones, the results of seismic risk computation are used by TRANSNEFT JSC.

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

16 CFR 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS...

A new remote hazard and risk assessment framework for glacial lakes in the Nepal Himalaya

NASA Astrophysics Data System (ADS)

Rounce, David R.; McKinney, Daene C.; Lala, Jonathan M.; Byers, Alton C.; Watson, C. Scott

2016-08-01

Glacial lake outburst floods (GLOFs) pose a significant threat to downstream communities and infrastructure due to their potential to rapidly unleash stored lake water. The most common triggers of these GLOFs are mass movement entering the lake and/or the self-destruction of the terminal moraine due to hydrostatic pressures or a buried ice core. This study initially uses previous qualitative and quantitative assessments to understand the hazards associated with eight glacial lakes in the Nepal Himalaya that are widely considered to be highly dangerous. The previous assessments yield conflicting classifications with respect to each glacial lake, which spurred the development of a new holistic, reproducible, and objective approach based solely on remotely sensed data. This remote hazard assessment analyzes mass movement entering the lake, the stability of the moraine, and lake growth in conjunction with a geometric GLOF to determine the downstream impacts such that the present and future risk associated with each glacial lake may be quantified. The new approach is developed within a hazard, risk, and management action framework with the aim that this remote assessment may guide future field campaigns, modeling efforts, and ultimately risk-mitigation strategies. The remote assessment was found to provide valuable information regarding the hazards faced by each glacial lake and results were discussed within the context of the current state of knowledge to help guide future efforts.

Methodologies for the assessment of earthquake-triggered landslides hazard. A comparison of Logistic Regression and Artificial Neural Network models.

NASA Astrophysics Data System (ADS)

García-Rodríguez, M. J.; Malpica, J. A.; Benito, B.

2009-04-01

In recent years, interest in landslide hazard assessment studies has increased substantially. They are appropriate for evaluation and mitigation plan development in landslide-prone areas. There are several techniques available for landslide hazard research at a regional scale. Generally, they can be classified in two groups: qualitative and quantitative methods. Most of qualitative methods tend to be subjective, since they depend on expert opinions and represent hazard levels in descriptive terms. On the other hand, quantitative methods are objective and they are commonly used due to the correlation between the instability factors and the location of the landslides. Within this group, statistical approaches and new heuristic techniques based on artificial intelligence (artificial neural network (ANN), fuzzy logic, etc.) provide rigorous analysis to assess landslide hazard over large regions. However, they depend on qualitative and quantitative data, scale, types of movements and characteristic factors used. We analysed and compared an approach for assessing earthquake-triggered landslides hazard using logistic regression (LR) and artificial neural networks (ANN) with a back-propagation learning algorithm. One application has been developed in El Salvador, a country of Central America where the earthquake-triggered landslides are usual phenomena. In a first phase, we analysed the susceptibility and hazard associated to the seismic scenario of the 2001 January 13th earthquake. We calibrated the models using data from the landslide inventory for this scenario. These analyses require input variables representing physical parameters to contribute to the initiation of slope instability, for example, slope gradient, elevation, aspect, mean annual precipitation, lithology, land use, and terrain roughness, while the occurrence or non-occurrence of landslides is considered as dependent variable. The results of the landslide susceptibility analysis are checked using landslide location data. These results show a high concordance between the landslide inventory and the high susceptibility estimated zone with an adjustment of 95.1 % for ANN model and 89.4% for LR model. In addition, we make a comparative analysis of both techniques using the Receiver Operating Characteristic (ROC) curve, a graphical plot of the sensitivity vs. (1 - specificity) for a binary classifier system in function of its discrimination threshold, and calculating the Area Under the ROC (AUROC) value for each model. Finally, the previous models are used for the developing a new probabilistic landslide hazard map for future events. They are obtained combining the expected triggering factor (calculated earthquake ground motion) for a return period of 475 years with the susceptibility map.

Studies on potential emission of hazardous gases due to uncontrolled open-air burning of waste vehicle tyres and their possible impacts on the environment

NASA Astrophysics Data System (ADS)

Shakya, Pawan R.; Shrestha, Pratima; Tamrakar, Chirika S.; Bhattarai, Pradeep K.

Uncontrolled open-air burning of waste vehicle tyres causing environmental pollution has become a popular practice in Nepal despite official ban considering the environment and public health hazards. In this study, an experimental model was set up in a laboratory scale in an attempt to understand the potential emission of hazardous gases such as CO, SO 2 and NO 2 due to such activities in Kathmandu Valley and their possible impacts on the environment. For this purpose, four types of tyre were collected representing two from passenger car and two from motorbike category. The emission level of CO in the tyre smoke was measured with a CO gas detector tube while SO 2 and NO 2 were determined by UV-visible spectrophotometer. Among the three types of the gases analyzed, SO 2 was emitted in significantly high levels by all the representative tyre samples. The emission levels of CO, SO 2 and NO 2 ranged from 21to 49, 102to 820 and 3to 9 μg g -1, respectively. Results revealed that the emission levels also varied with the tyre types and qualities. The potential emission of the hazardous gases per representative scrap tyre mass was also estimated. Results indicate that the gaseous pollutants due to the tyre fires could make a significant contribution for deterioration of the environmental condition of the Valley or elsewhere.

Pesticide poisoning: a major health problem in Sri Lanka.

PubMed

Van der Hoek, W; Konradsen, F; Athukorala, K; Wanigadewa, T

1998-01-01

Acute pesticide poisoning is a major public health problem in Sri Lanka. In several agricultural districts, it precedes all other causes of death in government hospitals. Most of the acute poisoning cases are intentional (suicide) and occur among young adults, mainly males. Poisoning due to occupational exposure is also common, but less well documented. In an irrigation area in Sri Lanka a very high incidence of serious pesticide poisoning was observed, with 68% due to intentional ingestion of liquid pesticides. It is argued that the easy availability and widespread use of highly hazardous pesticides is the most important reason for this high number of poisoning cases. The frequent application of highly hazardous pesticides in high concentrations was often irrational and posed serious health and financial risks to the farmers. Sales promotion activities and credit facilities promoted this excessive pesticide use, which was not counteracted by an agricultural extension service. Hazardous practices when spraying pesticides were due to the impossibility of applying recommended protective measures under the local conditions, rather than to lack of knowledge. Current emphasis on programs that promote the safe use of pesticides through education and training of farmers will be ineffective in Sri Lanka because knowledge is already high and most poisoning cases are intentional. Instead, enforcement of legislation to restrict availability of the most hazardous pesticides would result in an immediate health benefit. Improved agricultural extension services to promote alternative non-chemical methods of pest control is the most important strategy, in the long term, to prevent acute pesticide poisoning.

Review Article: Persistent organic pollutants and landfills - a review of past experiences and future challenges.

PubMed

Weber, Roland; Watson, Alan; Forter, Martin; Oliaei, Fardin

2011-01-01

The landfilling and dumping of persistent organic pollutants (POPs) and other persistent hazardous compounds, such as polychlorinated biphenyls (PCBs), hexachlorocyclohaxane (HCH), polybrominated diphenylether (PBDEs) or perfluorooctane sulfonic acid (PFOS) can have significant adverse environmental consequences. This paper reviews past experiences with such disposal practices and highlights their unsustainability due to the risks of contamination of ecosystems, the food chain, together with ground and drinking water supplies. The use and associated disposal of POPs have been occurring for over 50 years. Concurrent with the phase-out of some of the most hazardous chemicals, the production of new POPs, such as brominated and fluorinated compounds has increased since the 1990s. These latter compounds are commonly used in a wide range of consumer goods, and as consumer products reach the end of their useful lives, ultimately enter waste recycling and disposal systems, in particular at municipal landfills. Because of their very slow, or lack of degradability, POPs will persist in landfills for many decades and possibly centuries. Over these extended time periods engineered landfill systems and their liners are likely to degrade, thus posing a contemporary and future risk of releasing large contaminant loads to the environment. This review highlights the necessity for alternative disposal methods for POP wastes, including destruction or complete removal from potential environmental release. In addition to such end of pipe solutions a policy change in the use pattern of persistent toxic chemicals is inevitable. In addition, inventories for the location and quantity of POPs in landfills, together with an assessment of their threat to ecosystems, drinking water and food resources are identified as key measures to facilitate appropriate management of risks. Finally the challenges of POP wastes in transition/developing countries, the risk of increased leaching of POPs from landfills due to climate change, and the possible negative impact of natural attenuation processes are considered.

Female labor force participation and female mortality in Wisconsin 1974-1978.

PubMed

Passannante, M R; Nathanson, C A

1985-01-01

The following research question is addressed in the study: what effect will the entrance of women into the labor force have on female mortality rates for all causes of death combined as well as specific causes relating to occupational stress, behavioral factors and physical hazards associated with occupation? This question is examined through comparisons of age, marital status and occupation-specific death rates for all causes of death combined and for selected causes of death. Death certificates provided by the Wisconsin Bureau of Health Statistics for the years 1974-1978 and population data provided by the 1976 Survey of Income and Education were used to construct death rates. The death rates of the white civilian female population of Wisconsin 16-64 years of age were examined using exploratory data analysis techniques (schematic plots and median polish) and standard errors. In general, the death rates of women in the labor force are substantially lower than those of housewives. These results may indicate that the role of housewife exposes women to health hazards. In addition, the results of this study may suggest some selectivity of healthy women into the labor force or a protective effect of labor force participation. In a limited number of instances, labor force participants' mortality rates exceed those of housewives. In the 60-64 year old population, white-collar workers, specifically, sales workers, managers and professionals, experience significantly higher death rates than housewives. In addition, specific groups of labor force participants experience significantly higher death rates than housewives for accidental deaths (i.e. laborers 16-44 and 45-54), deaths due to heart disease (i.e. laborers 45-54 and sales workers 60-64) and deaths due to malignant neoplasms (i.e. white-collar workers 60-64 years of age). The possibility that these instances indicate the direction of future mortality trends should be considered.

Shelf life studies of common hazardous materials: An innovative approach to pollution prevention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmanian, P.A.

1995-12-31

Hazardous chemical systems, ranging in form from simple materials to compounded products and complex natural mixtures, constitute an important asset in the Navy`s daily operations. These materials include but are not limited to paints, solvents, soaps, resins, adhesives, pesticides, printing materials, petroleum products, and photographic chemicals. The short-lived availability of hazardous materials that are suspected of or known to degrade over time imposes a unique burden on the Navy`s procurement and hazardous waste disposal systems. Hazardous Materials whose shelf life`s have expired are processed for disposal as hazardous wastes. In addition, these expired hazardous materials must be replaced with newmore » materials. Many shelf life codes are based solely on the recommendations of suppliers and are not critically subjected to scientific study. The important goal of this project is to conduct a comprehensive study of the degradation of a given hazardous material to determine the true shelf life.« less

Progress in NTHMP Hazard Assessment

USGS Publications Warehouse

Gonzalez, F.I.; Titov, V.V.; Mofjeld, H.O.; Venturato, A.J.; Simmons, R.S.; Hansen, R.; Combellick, Rodney; Eisner, R.K.; Hoirup, D.F.; Yanagi, B.S.; Yong, S.; Darienzo, M.; Priest, G.R.; Crawford, G.L.; Walsh, T.J.

2005-01-01

The Hazard Assessment component of the U.S. National Tsunami Hazard Mitigation Program has completed 22 modeling efforts covering 113 coastal communities with an estimated population of 1.2 million residents that are at risk. Twenty-three evacuation maps have also been completed. Important improvements in organizational structure have been made with the addition of two State geotechnical agency representatives to Steering Group membership, and progress has been made on other improvements suggested by program reviewers. ?? Springer 2005.

Social and Non-Social Hazard Response in Drivers with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Bishop, Haley Johnson; Biasini, Fred J.; Stavrinos, Despina

2017-01-01

Driving is a complex task that relies on manual, cognitive, visual and social skill. The social demands of driving may be challenging for individuals with Autism Spectrum Disorder (ASD) due to known social impairments. This study investigated how drivers with ASD respond to social (e.g., pedestrians) and non-social (e.g., vehicles) hazards in a…

Options for the destruction of chemical weapons and management of the associated risks.

PubMed

Manley, Ron G

2006-09-01

The destruction of chemical weapons is a hazardous operation. The degree of hazard posed, however, is not uniform and is dependent on the specific chemical agent and the configuration of the weapon or bulk storage vessel in which it is contained. For example, a highly volatile nerve agent in an explosively configured munition, such as a rocket, poses a very different hazard from that of a bulk storage container of viscous mustard gas. Equally the handling of recovered, often highly corroded, World War (WW)I or WWII chemical munitions will pose a very different hazard from that associated with dealing with modern chemical weapons stored under the appropriate conditions. Over the years, a number of technologies have been developed for the destruction of chemical weapons. Each has its advantages and disadvantages. None of them provide a universal solution to the problem. When assessing options for the destruction of these weapons and the management of the associated risks, therefore, it is important to give due consideration and weight to these differences. To ensure that the destruction technology selected takes due account of them and that the resulting overall risk assessment accurately reflects the actual risks involved.

Developing a safe on-orbit cryogenic depot

NASA Technical Reports Server (NTRS)

Bahr, Nicholas J.

1992-01-01

New U.S. space initiatives will require technology to realize planned programs such as piloted lunar and Mars missions. Key to the optimal execution of such missions are high performance orbit transfer vehicles and propellant storage facilities. Large amounts of liquid hydrogen and oxygen demand a uniquely designed on-orbit cryogenic propellant depot. Because of the inherent dangers in propellant storage and handling, a comprehensive system safety program must be established. This paper shows how the myriad and complex hazards demonstrate the need for an integrated safety effort to be applied from program conception through operational use. Even though the cryogenic depot is still in the conceptual stage, many of the hazards have been identified, including fatigue due to heavy thermal loading from environmental and operating temperature extremes, micrometeoroid and/or depot ancillary equipment impact (this is an important problem due to the large surface area needed to house the large quantities of propellant), docking and maintenance hazards, and hazards associated with extended extravehicular activity. Various safety analysis techniques were presented for each program phase. Specific system safety implementation steps were also listed. Enhanced risk assessment was demonstrated through the incorporation of these methods.

Global Seismic Hazard Assessment Program (GSHAP) in continental Asia

USGS Publications Warehouse

Zhang, Peizhen; Yang, Zhi-xian; Gupta, Harsh K.; Bhatia, Satish C.; Shedlock, Kaye M.

1999-01-01

The regional hazard mapping for the whole Eastern Asia was coordinated by the SSB Regional Centre in Beijing, originating from the expansion of the test area initially established in the border region of China-India-Nepal-Myanmar- Bangla Dash, in coordination with the other Regional Centres (JIPE, Moscow, and AGSO, Canberra) and with the direct assistance of the USGS. All Eastern Asian countries have participated directly in this regional effort, with the addition of Japan, for which an existing national hazard map was incorporated. The regional hazard depicts the expected peak ground acceleration with 10% exceedance probability in 50 years.

A Hybrid-Cloud Science Data System Enabling Advanced Rapid Imaging & Analysis for Monitoring Hazards

NASA Astrophysics Data System (ADS)

Hua, H.; Owen, S. E.; Yun, S.; Lundgren, P.; Moore, A. W.; Fielding, E. J.; Radulescu, C.; Sacco, G.; Stough, T. M.; Mattmann, C. A.; Cervelli, P. F.; Poland, M. P.; Cruz, J.

2012-12-01

Volcanic eruptions, landslides, and levee failures are some examples of hazards that can be more accurately forecasted with sufficient monitoring of precursory ground deformation, such as the high-resolution measurements from GPS and InSAR. In addition, coherence and reflectivity change maps can be used to detect surface change due to lava flows, mudslides, tornadoes, floods, and other natural and man-made disasters. However, it is difficult for many volcano observatories and other monitoring agencies to process GPS and InSAR products in an automated scenario needed for continual monitoring of events. Additionally, numerous interoperability barriers exist in multi-sensor observation data access, preparation, and fusion to create actionable products. Combining high spatial resolution InSAR products with high temporal resolution GPS products--and automating this data preparation & processing across global-scale areas of interests--present an untapped science and monitoring opportunity. The global coverage offered by satellite-based SAR observations, and the rapidly expanding GPS networks, can provide orders of magnitude more data on these hazardous events if we have a data system that can efficiently and effectively analyze the voluminous raw data, and provide users the tools to access data from their regions of interest. Currently, combined GPS & InSAR time series are primarily generated for specific research applications, and are not implemented to run on large-scale continuous data sets and delivered to decision-making communities. We are developing an advanced service-oriented architecture for hazard monitoring leveraging NASA-funded algorithms and data management to enable both science and decision-making communities to monitor areas of interests via seamless data preparation, processing, and distribution. Our objectives: * Enable high-volume and low-latency automatic generation of NASA Solid Earth science data products (InSAR and GPS) to support hazards monitoring. * Facilitate NASA-USGS collaborations to share NASA InSAR and GPS data products, which are difficult to process in high-volume and low-latency, for decision-support. * Enable interoperable discovery, access, and sharing of NASA observations and derived actionable products, and between the observation and decision-making communities. * Enable their improved understanding through visualization, mining, and cross-agency sharing. Existing InSAR & GPS processing packages and other software are integrated for generating geodetic decision support monitoring products. We employ semantic and cloud-based data management and processing techniques for handling large data volumes, reducing end product latency, codifying data system information with semantics, and deploying interoperable services for actionable products to decision-making communities.

Determination of naturally radioactive elements in chalk sticks by means of gamma spectroscopy

NASA Astrophysics Data System (ADS)

Abd El-Wahab, Magda; Morsy, Zeinab; El-Faramawy, Nabil

2010-04-01

The radiation hazards due to ingestion of chalkboard dust were investigated. Sixteen samples from three different origin fabricates were used. The estimation of radiation hazard indices were based on the evaluation of the concentration activities of the natural radionuclides 238U, 232Th and 40K. The radium equivalent activity, external hazard index, internal hazard index and the annual dose equivalent associated with the radionuclides were calculated and compared with international recommended values to assess the radiation hazard. The values of internal and external radiation hazard indices were found to be less than unity. The annual effective dose rate obtained, E eff, and the annual gonadal dose equivalent (AGDE) are found to be less than the limit of the doses recommended by the International Commission on Radiological Protection for the general public. The analytical results show that besides the main calcium content, some toxic elements, S, Mo and Pb and Ni and Pb, in the Egyptian and imported chalk stocks, respectively, existed.

Determination of naturally radioactive elements in chalk sticks by means of gamma spectroscopy

NASA Astrophysics Data System (ADS)

El-Wahab, Magda Abd; Morsy, Zeinab; El-Faramawy, Nabil

The radiation hazards due to ingestion of chalkboard dust were investigated. Sixteen samples from three different origin fabricates were used. The estimation of radiation hazard indices were based on the evaluation of the concentration activities of the natural radionuclides 238U, 232Th and 40K. The radium equivalent activity, external hazard index, internal hazard index and the annual dose equivalent associated with the radionuclides were calculated and compared with international recommended values to assess the radiation hazard. The values of internal and external radiation hazard indices were found to be less than unity. The annual effective dose rate obtained, Eeff, and the annual gonadal dose equivalent (AGDE) are found to be less than the limit of the doses recommended by the International Commission on Radiological Protection for the general public. The analytical results show that besides the main calcium content, some toxic elements, S, Mo and Pb and Ni and Pb, in the Egyptian and imported chalk stocks, respectively, existed.

Why is Probabilistic Seismic Hazard Analysis (PSHA) still used?

NASA Astrophysics Data System (ADS)

Mulargia, Francesco; Stark, Philip B.; Geller, Robert J.

2017-03-01

Even though it has never been validated by objective testing, Probabilistic Seismic Hazard Analysis (PSHA) has been widely used for almost 50 years by governments and industry in applications with lives and property hanging in the balance, such as deciding safety criteria for nuclear power plants, making official national hazard maps, developing building code requirements, and determining earthquake insurance rates. PSHA rests on assumptions now known to conflict with earthquake physics; many damaging earthquakes, including the 1988 Spitak, Armenia, event and the 2011 Tohoku, Japan, event, have occurred in regions relatively rated low-risk by PSHA hazard maps. No extant method, including PSHA, produces reliable estimates of seismic hazard. Earthquake hazard mitigation should be recognized to be inherently political, involving a tradeoff between uncertain costs and uncertain risks. Earthquake scientists, engineers, and risk managers can make important contributions to the hard problem of allocating limited resources wisely, but government officials and stakeholders must take responsibility for the risks of accidents due to natural events that exceed the adopted safety criteria.

Results of Testing the Relative Oxidizing Hazard of Wipes and KMI Zeolite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ams, Bridget Elaine

This report includes the results from testing performed on the relative oxidizing hazard of a number of organic sorbing wipe materials, as well as KMI zeolite. These studies were undertaken to address a need by the Los Alamos National Laboratory (LANL) Hazardous Materials Management group, which requires a material that can sorb small spills in a glovebox without creating a disposal hazard due to the potential for oxidation reactions, as requested in Request for Testing of Wipes and Zeolite for Los Alamos National Laboratory Hazardous Materials Group (NPl-7) (NPl-7-17-002) and Request for Testing of Chamois Material for Los Alamos Nationalmore » Laboratory Hazardous Materials Group (NPl-7) (NPl-7-17-005). This set oftests is a continuation of previous testing described in Results from Preparation and Testing of Sorbents Mixed with (DWT-RPT-003), which provided data for the Waste Isolation Pilot Plant's Basis of Knowledge. The Basis of Knowledge establishes criteria for evaluating transuranic (TRU) waste that contains oxidizing chemicals.« less

A study of the impact of moist-heat and dry-heat treatment processes on hazardous trace elements migration in food waste.

PubMed

Chen, Ting; Jin, Yiying; Qiu, Xiaopeng; Chen, Xin

2015-03-01

Using laboratory experiments, the authors investigated the impact of dry-heat and moist-heat treatment processes on hazardous trace elements (As, Hg, Cd, Cr, and Pb) in food waste and explored their distribution patterns for three waste components: oil, aqueous, and solid components. The results indicated that an insignificant reduction of hazardous trace elements in heat-treated waste-0.61-14.29% after moist-heat treatment and 4.53-12.25% after dry-heat treatment-and a significant reduction in hazardous trace elements (except for Hg without external addition) after centrifugal dehydration (P < 0.5). Moreover, after heat treatment, over 90% of the hazardous trace elements in the waste were detected in the aqueous and solid components, whereas only a trace amount of hazardous trace elements was detected in the oil component (<0.01%). In addition, results indicated that heat treatment process did not significantly reduce the concentration of hazardous trace elements in food waste, but the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk considerably. Finally, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment on the removal of external water-soluble ionic hazardous trace elements. An insignificant reduction of hazardous trace elements in heat-treated waste showed that heat treatment does not reduce trace elements contamination in food waste considerably, whereas the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk significantly. Moreover, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment for the removal of external water-soluble ionic hazardous trace elements, by exploring distribution patterns of trace elements in three waste components: oil, aqueous, and solid components.

[Synthetic cannabinoids: spread, addiction biology & current perspective of personal health hazard].

PubMed

Bonnet, U; Mahler, H

2015-04-01

Among the new psychoactive substances (NPS), most frequently synthetic cannabinoids (SCBs) have been found in Europe. These are sold as active compounds in e. g. so-called "herbal blends". When inhaled or ingested, besides intoxication symptoms, as they occur with heavy cannabis use (e. g., tachycardia, myocardial infarction, confusion, hallucinations, panic attacks, and paranoia), harmful effects (severe agitation, coma, catatonic stupor, hypertension, cardiac arrhythmia, dyspnoea, seizures, myoclonus, rhabdomyolysis, hyperthermia, diaphoresis, acute kidney injury, vomiting, headache, and hypokalemia) arise, which are mostly unusual about cannabis use. In addition, the first cases of addiction and death related to SCBs have been reported. Taking into account the newest literature and using an algorithm with two main criteria (addiction potential, toxicity), the authors made a first attempt to rank the personal health hazard of SCBs in comparison to that of other psychoactive drugs. Accordingly, the relative health hazard of SCBs is found to be somewhat higher than that of cannabis and lower than that of synthetic cathinones ("bath salts"). However, the toxicity of SCBs, is significantly greater than the toxicity of cannabis, thus being similar to that of synthetic cathinones and benzodiazepines. The addiction potential appears to be lower than that of synthetic cathinones, benzodiazepines, or cannabis. Due to the fluctuation of substances and the availability in internet resources, legislation is facing a serious "hare-hedgehog" problem to control the manufacture, trade and possession of SCBs. © Georg Thieme Verlag KG Stuttgart · New York.

Sports eyewear protective standards.

PubMed

Dain, Stephen J

2016-01-01

Eye injuries sustained during sport comprise up to 20 per cent of all injuries to the eye serious enough for medical attention to be sought. The prevalence of eye injuries in sport is not easily assessed due to lack of authoritative participation rates, so most studies report total numbers in a time period. The evidence on the proportion of all ocular injuries that are from sport is reviewed. The relative frequencies in different sports are compared in a qualitative manner and the sports with greater numbers of ocular injuries are detailed. In common with occupational injuries to the eye, most sports eye injuries are considered preventable. The hierarchy of action for occupational risk is detailed and adapted to use in a sports scenario. All the available international, regional and national standards on sports eye protection are detailed and their provisions compared. The major function of the standards is to provide adequate protection against the hazard of the sport concerned. These are detailed and compared as a function of energy transfer. Eye protection must not introduce additional or secondary hazards (for instance, fracturing into sharp fragments on impact) and not introduce features that would deter the wearing of eye protection (for instance, restricting field of view to impede playing the sport). The provisions of the standards intended to limit secondary hazards are detailed and compared. The need for future work in standards writing and the activities of the International Standardization Organization in sports eye protection are detailed. © 2016 Optometry Australia.

Comprehension of hazard communication: effects of pictograms on safety data sheets and labels.

PubMed

Boelhouwer, Eric; Davis, Jerry; Franco-Watkins, Ana; Dorris, Nathan; Lungu, Claudiu

2013-09-01

The United Nations has proposed the Globally Harmonized System (GHS) of Classification and Labelling of Chemicals to make hazard communication more uniform and to improve comprehension. Two experiments were conducted to test whether the addition of hazard and precautionary pictograms to safety data sheets and product labels would improve the transfer of information to users compared to safety data sheets and product labels containing text only. Additionally, naïve users, workers, and experts were tested to determine any potential differences among users. The effect of adding pictograms to safety data sheets and labels was statistically significant for some conditions, but was not significant across all conditions. One benefit of the addition of pictograms was that the time to respond to the survey questions decreased when the pictograms were present for both the SDS and the labels. GHS format SDS and labels do provide benefits to users, but the system will need further enhancements and modifications to continue to improve the effectiveness of hazard communication. The final rule to modify the HCS to include the Globally Harmonized System (GHS) for the Classification and Labelling of Chemicals announced by OSHA (2012b) will change the information content of every chemical SDS and label used in commerce. This study suggests that the inclusion of GHS hazard pictograms and precautionary pictograms to SDS and labels may benefit the user. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

49 CFR 173.302a - Additional requirements for shipment of nonliquefied (permanent) compressed gases in...

Code of Federal Regulations, 2010 CFR

2010-10-01

... nonliquefied (permanent) compressed gases in specification cylinders. 173.302a Section 173.302a Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND...

40 CFR 262.51 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Exports of Hazardous Waste § 262.51 Definitions. In addition to... waste will be sent. EPA Acknowledgement of Consent means the cable sent to EPA from the U.S. Embassy in...

40 CFR 63.3961 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous.... You do not need to redetermine the mass of organic HAP in coatings, thinners and/or other additives...

Association of extremely high levels of high-density lipoprotein cholesterol with cardiovascular mortality in a pooled analysis of 9 cohort studies including 43,407 individuals: The EPOCH-JAPAN study.

PubMed

Hirata, Aya; Sugiyama, Daisuke; Watanabe, Makoto; Tamakoshi, Akiko; Iso, Hiroyasu; Kotani, Kazuhiko; Kiyama, Masahiko; Yamada, Michiko; Ishikawa, Shizukiyo; Murakami, Yoshitaka; Miura, Katsuyuki; Ueshima, Hirotsugu; Okamura, Tomonori

2018-02-08

The effect of very high or extremely high levels of high-density lipoprotein cholesterol (HDL-C) on cardiovascular disease (CVD) is not well described. Although a few recent studies have reported the adverse effects of extremely high levels of HDL-C on CVD events, these did not show a statistically significant association between extremely high levels of HDL-C and cause-specific CVD mortality. In addition, Asian populations have not been studied. We examine the impact of extremely high levels of HDL-C on cause-specific CVD mortality using pooled data of Japanese cohort studies. We performed a large-scale pooled analysis of 9 Japanese cohorts including 43,407 participants aged 40-89 years, dividing the participants into 5 groups by HDL-C levels, including extremely high levels of HDL-C ≥2.33 mmol/L (≥90 mg/dL). We estimated the adjusted hazard ratio of each HDL-C category for all-cause death and cause-specific deaths compared with HDL-C 1.04-1.55 mmol/L (40-59 mg/dL) using a cohort-stratified Cox proportional hazards model. During a 12.1-year follow-up, 4995 all-cause deaths and 1280 deaths due to overall CVD were identified. Extremely high levels of HDL-C were significantly associated with increased risk of atherosclerotic CVD mortality (hazard ratio = 2.37, 95% confidence interval: 1.37-4.09 for total) and increased risk for coronary heart disease and ischemic stroke. In addition, the risk for extremely high HDL-C was more evident among current drinkers. We showed extremely high levels of HDL-C had an adverse effect on atherosclerotic CVD mortality in a pooled analysis of Japanese cohorts. Copyright © 2018 National Lipid Association. Published by Elsevier Inc. All rights reserved.

A GHS-consistent approach to health hazard classification of petroleum substances, a class of UVCB substances.

PubMed

Clark, Charles R; McKee, Richard H; Freeman, James J; Swick, Derek; Mahagaokar, Suneeta; Pigram, Glenda; Roberts, Linda G; Smulders, Chantal J; Beatty, Patrick W

2013-12-01

The process streams refined from petroleum crude oil for use in petroleum products are among those designated by USEPA as UVCB substances (unknown or variable composition, complex reaction products and biological materials). They are identified on global chemical inventories with unique Chemical Abstract Services (CAS) numbers and names. The chemical complexity of most petroleum substances presents challenges when evaluating their hazards and can result in differing evaluations due to the varying level of hazardous constituents and differences in national chemical control regulations. Global efforts to harmonize the identification of chemical hazards are aimed at promoting the use of consistent hazard evaluation criteria. This paper discusses a systematic approach for the health hazard evaluation of petroleum substances using chemical categories and the United Nations (UN) Globally Harmonized System (GHS) of classification and labeling. Also described are historical efforts to characterize the hazard of these substances and how they led to the development of categories, the identification of potentially hazardous constituents which should be considered, and a summary of the toxicology of the major petroleum product groups. The use of these categories can increase the utility of existing data, provide better informed hazard evaluations, and reduce the amount of animal testing required. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Comparative hazard analysis of processes leading to remarkable flash floods (France, 1930-1999)

NASA Astrophysics Data System (ADS)

Boudou, M.; Lang, M.; Vinet, F.; Cœur, D.

2016-10-01

Flash flood events are responsible for large economic losses and lead to fatalities every year in France. This is especially the case in the Mediterranean and oversea territories/departments of France, characterized by extreme hydro-climatological features and with a large part of the population exposed to flood risks. The recurrence of remarkable flash flood events, associated with high hazard intensity, significant damage and socio-political consequences, therefore raises several issues for authorities and risk management policies. This study aims to improve our understanding of the hazard analysis process in the case of four remarkable flood events: March 1930, October 1940, January 1980 and November 1999. Firstly, we present the methodology used to define the remarkability score of a flood event. Then, to identify the factors leading to a remarkable flood event, we explore the main parameters of the hazard analysis process, such as the meteorological triggering conditions, the return period of the rainfall and peak discharge, as well as some additional factors (initial catchment state, flood chronology, cascade effects, etc.). The results contribute to understanding the complexity of the processes leading to flood hazard and highlight the importance for risk managers of taking additional factors into account.

Physical and Economic Impacts of Sea-Level Rise and Low Probability Flooding Events on Coastal Communities

PubMed Central

Prime, Thomas; Brown, Jennifer M.; Plater, Andrew J.

2015-01-01

Conventionally flood mapping typically includes only a static water level (e.g. peak of a storm tide) in coastal flood inundation events. Additional factors become increasingly important when increased water-level thresholds are met during the combination of a storm tide and increased mean sea level. This research incorporates factors such as wave overtopping and river flow in a range of flood inundation scenarios of future sea-level projections for a UK case study of Fleetwood, northwest England. With increasing mean sea level it is shown that wave overtopping and river forcing have an important bearing on the cost of coastal flood events. The method presented converts inundation maps into monetary cost. This research demonstrates that under scenarios of joint extreme surge-wave-river events the cost of flooding can be increased by up to a factor of 8 compared with an increase in extent of up to a factor of 3 relative to “surge alone” event. This is due to different areas being exposed to different flood hazards and areas with common hazard where flood waters combine non-linearly. This shows that relying simply on flood extent and volume can under-predict the actual economic impact felt by a coastal community. Additionally, the scenario inundation depths have been presented as “brick course” maps, which represent a new way of interpreting flood maps. This is primarily aimed at stakeholders to increase levels of engagement within the coastal community. PMID:25710497

Physical and economic impacts of sea-level rise and low probability flooding events on coastal communities.

PubMed

Prime, Thomas; Brown, Jennifer M; Plater, Andrew J

2015-01-01

Conventionally flood mapping typically includes only a static water level (e.g. peak of a storm tide) in coastal flood inundation events. Additional factors become increasingly important when increased water-level thresholds are met during the combination of a storm tide and increased mean sea level. This research incorporates factors such as wave overtopping and river flow in a range of flood inundation scenarios of future sea-level projections for a UK case study of Fleetwood, northwest England. With increasing mean sea level it is shown that wave overtopping and river forcing have an important bearing on the cost of coastal flood events. The method presented converts inundation maps into monetary cost. This research demonstrates that under scenarios of joint extreme surge-wave-river events the cost of flooding can be increased by up to a factor of 8 compared with an increase in extent of up to a factor of 3 relative to "surge alone" event. This is due to different areas being exposed to different flood hazards and areas with common hazard where flood waters combine non-linearly. This shows that relying simply on flood extent and volume can under-predict the actual economic impact felt by a coastal community. Additionally, the scenario inundation depths have been presented as "brick course" maps, which represent a new way of interpreting flood maps. This is primarily aimed at stakeholders to increase levels of engagement within the coastal community.

Induced Seismicity: Balancing the Scientific Process With the Need for Rapid Communication of Evolving Seismic Hazards

NASA Astrophysics Data System (ADS)

Cochran, E. S.; Ellsworth, W. L.; Llenos, A. L.; Rubinstein, J. L.

2014-12-01

In this presentation, we outline the USGS response to dramatically increased earthquake activity in the central and eastern US, with a focus on Oklahoma. Using the November 2011 Prague, OK earthquake sequence as an example, we describe the tensions between the need to conduct thorough scientific investigations while providing timely information to local, state, and federal government agencies, and the public. In the early morning hours of November 5, 2011 a M4.8 earthquake struck near the town of Prague, Oklahoma and was followed by a M5.6 earthquake just over 20 hours later. The mainshock was widely felt across the central US, causing damage to homes close to the epicenter and injuring at least 2 people. Within hours of the initial event several portable instruments were installed and following the mainshock a larger seismic deployment was mounted (Keranen et al., 2013). A sizeable earthquake in the central or eastern US is always of scientific interest due to the dearth of seismic data available for assessing seismic hazard. The Prague sequence garnered especially strong scientific and public interest when a link between the sequence and injection of wastewater at several local deep wells was postulated. Therefore, there was a need to provide immediate information as it became available. However, in the first few days to months it was impossible to confidently confirm or refute whether the seismicity was linked to injection, but it was known that the foreshock occurred close to several deep injection wells and many of the events were shallow; thus, the sequence warranted further study. Over the course of the next few years, several studies built the case that the Prague sequence was likely induced by wastewater injection (Keranen et al., 2013; Sumy et al., 2014; McGarr, 2014) and additional studies suggested that the changes in seismicity throughout Oklahoma were not due to natural variations in seismicity rates (Llenos and Michael, 2013; Ellsworth, 2013). These studies changed the public discourse from providing primary information about the on-going earthquake sequences to how to mitigate the hazard associated with wastewater injection. And, scientific studies are now focused on how to include the impact of induced events within the National Seismic Hazard Maps (e.g. Peterson et al., 2014).

Space vehicle propulsion systems: Environmental space hazards

NASA Technical Reports Server (NTRS)

Disimile, P. J.; Bahr, G. K.

1990-01-01

The hazards that exist in geolunar space which may degrade, disrupt, or terminate the performance of space-based LOX/LH2 rocket engines are evaluated. Accordingly, a summary of the open literature pertaining to the geolunar space hazards is provided. Approximately 350 citations and about 200 documents and abstracts were reviewed; the documents selected give current and quantitative detail. The methodology was to categorize the various space hazards in relation to their importance in specified regions of geolunar space. Additionally, the effect of the various space hazards in relation to spacecraft and their systems were investigated. It was found that further investigation of the literature would be required to assess the effects of these hazards on propulsion systems per se; in particular, possible degrading effects on exterior nozzle structure, directional gimbals, and internal combustion chamber integrity and geometry.

The Framework of a Coastal Hazards Model - A Tool for Predicting the Impact of Severe Storms

USGS Publications Warehouse

Barnard, Patrick L.; O'Reilly, Bill; van Ormondt, Maarten; Elias, Edwin; Ruggiero, Peter; Erikson, Li H.; Hapke, Cheryl; Collins, Brian D.; Guza, Robert T.; Adams, Peter N.; Thomas, Julie

2009-01-01

The U.S. Geological Survey (USGS) Multi-Hazards Demonstration Project in Southern California (Jones and others, 2007) is a five-year project (FY2007-FY2011) integrating multiple USGS research activities with the needs of external partners, such as emergency managers and land-use planners, to produce products and information that can be used to create more disaster-resilient communities. The hazards being evaluated include earthquakes, landslides, floods, tsunamis, wildfires, and coastal hazards. For the Coastal Hazards Task of the Multi-Hazards Demonstration Project in Southern California, the USGS is leading the development of a modeling system for forecasting the impact of winter storms threatening the entire Southern California shoreline from Pt. Conception to the Mexican border. The modeling system, run in real-time or with prescribed scenarios, will incorporate atmospheric information (that is, wind and pressure fields) with a suite of state-of-the-art physical process models (that is, tide, surge, and wave) to enable detailed prediction of currents, wave height, wave runup, and total water levels. Additional research-grade predictions of coastal flooding, inundation, erosion, and cliff failure will also be performed. Initial model testing, performance evaluation, and product development will be focused on a severe winter-storm scenario developed in collaboration with the Winter Storm Working Group of the USGS Multi-Hazards Demonstration Project in Southern California. Additional offline model runs and products will include coastal-hazard hindcasts of selected historical winter storms, as well as additional severe winter-storm simulations based on statistical analyses of historical wave and water-level data. The coastal-hazards model design will also be appropriate for simulating the impact of storms under various sea level rise and climate-change scenarios. The operational capabilities of this modeling system are designed to provide emergency planners with the critical information they need to respond quickly and efficiently and to increase public safety and mitigate damage associated with powerful coastal storms. For instance, high resolution local models will predict detailed wave heights, breaking patterns, and current strengths for use in warning systems for harbor-mouth navigation and densely populated coastal regions where beach safety is threatened. The offline applications are intended to equip coastal managers with the information needed to manage and allocate their resources effectively to protect sections of coast that may be most vulnerable to future severe storms.

Landslides of Palestinian Region

NASA Astrophysics Data System (ADS)

Alwahsh, H.

2013-12-01

Natural disasters are extreme sudden events caused by environmental and natural actors that take away the lives of many thousands of people each year and damage large amount of properties. They strike anywhere on earth, often without any warning. A risk maps of natural disaster are very useful to identify the places that might be adversely affected in the event of natural disaster. The earthquakes are one of natural disaster that have the greatest hazards and will cause loss of life and properties due to damaging the structures of building, dams, bridges. In addition, it will affect local geology and soil conditions. The site effects play an important role in earthquake risk because of its amplification or damping simulation. Another parameter in developing risk map is landslide, which is also one of the most important topics in site effect hazards. Palestine region has been suffering landslide hazards because of the topographical and geological conditions of this region. Most Palestine consists of mountainous area, which has great steep slopes and the type of soil is mainly grayish to yellowish silty clay (Marl Soil). Due to the above mentioned factors many landslides have been occurred from Negev south to the northern borders of Palestine. An example of huge and destruction landslide in a Palestine authority is the landslide in the White Mountain area in the city of Nablus, which occurred in 1997. The geotechnical and geophysical investigation as well as slope stability analysis should be considered in making landslide maps that are necessary to develop risk levels of the natural disaster. Landslides occurred in slopes that are created naturally or by human beings. Failure of soil mass occurs, and hence landslide of soil mass happen due to sliding of soil mass along a plane or curved surface. In general, the slopes become unstable when the shear stresses (driving force) generated in the soil mass exceed the available shearing resistance on the rupture surface. There are many factors which affect directly or indirectly the slope stability, the stability of a slope depends on the geometry and soil engineering properties which include geological, topography, climate, hydrologic conditions, weather and land use (human effects). There are many things that can be used to mitigate landslides disaster. The most important one is the control of the landslides by establishing landslide maps. Other methods such as geometrical, hydrological, mechanical and chemical methods would also be effective in mitigate landslides. Recently, due to the development of the technology in all aspects, a safe and economical design for slopes can be achieved easily.

Large-scale experiments for the vulnerability analysis of buildings impacted and intruded by fluviatile torrential hazard processes

NASA Astrophysics Data System (ADS)

Sturm, Michael; Gems, Bernhard; Fuchs, Sven; Mazzorana, Bruno; Papathoma-Köhle, Maria; Aufleger, Markus

2016-04-01

In European mountain regions, losses due to torrential hazards are still considerable high despite the ongoing debate on an overall increasing or decreasing trend. Recent events in Austria severely revealed that due to technical and economic reasons, an overall protection of settlements in the alpine environment against torrential hazards is not feasible. On the side of the hazard process, events with unpredictable intensities may represent overload scenarios for existent protection structures in the torrent catchments. They bear a particular risk of significant losses in the living space. Although the importance of vulnerability is widely recognised, there is still a research gap concerning its assessment. Currently, potential losses at buildings due to torrential hazards and their comparison with reinstatement costs are determined by the use of empirical functions. Hence, relations of process intensities and the extent of losses, gathered by the analysis of historic hazard events and the information of object-specific restoration values, are used. This approach does not represent a physics-based and integral concept since relevant and often crucial processes, as the intrusion of the fluid-sediment-mixture into elements at risk, are not considered. Based on these findings, our work is targeted at extending these findings and models of present risk research in the context of an integral, more physics-based vulnerability analysis concept. Fluviatile torrential hazard processes and their impacts on the building envelope are experimentally modelled. Material intrusion processes are thereby explicitly considered. Dynamic impacts are gathered quantitatively and spatially distributed by the use of a large set of force transducers. The experimental tests are accomplished with artificial, vertical and skewed plates, including also openings for material intrusion. Further, the impacts on specific buildings within the test site of the work, the fan apex of the Schnannerbach torrent in Tyrol (Austria), are analysed in detail. A couple of buildings are entirely reconstructed within the physical scale model at the scale 1:30. They include basement and first floor and thereby all relevant openings on the building envelopes. The results from experimental modelling represent the data basis for further physics-based vulnerability analysis. Hence, the applied vulnerability analysis concept significantly extends the methods presently used in flood risk assessment. The results of the study are of basic importance for practical application, as they provide extensive information to support hazard zone mapping and management, as well as the planning of local technical protection measures.

Supplemental Hazard Analysis and Risk Assessment - Hydrotreater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Peter P.; Wagner, Katie A.

A supplemental hazard analysis was conducted and quantitative risk assessment performed in response to an independent review comment received by the Pacific Northwest National Laboratory (PNNL) from the U.S. Department of Energy Pacific Northwest Field Office (PNSO) against the Hydrotreater/Distillation Column Hazard Analysis Report issued in April 2013. The supplemental analysis used the hazardous conditions documented by the previous April 2013 report as a basis. The conditions were screened and grouped for the purpose of identifying whether additional prudent, practical hazard controls could be identified, using a quantitative risk evaluation to assess the adequacy of the controls and establish amore » lower level of concern for the likelihood of potential serious accidents. Calculations were performed to support conclusions where necessary.« less

Hazardous healthcare waste management in the Kingdom of Bahrain.

PubMed

Mohamed, L F; Ebrahim, S A; Al-Thukair, A A

2009-08-01

Hazardous healthcare waste has become an environmental concern for many developing countries including the Kingdom of Bahrain. There have been several significant obstacles facing the Kingdom in dealing with this issue including; limited documentation regarding generation, handling, management, and disposal of waste. This in turn hinders efforts to plan better healthcare waste management. In this paper, hazardous waste management status in the Kingdom has been investigated through an extensive survey carried out on selected public and private healthcare premises. Hazardous waste management practices including: waste generation, segregation, storage, collection, transportation, treatment, and disposal were determined. The results of this study along with key findings are discussed and summarized. In addition; several effective recommendations and improvements of hazardous waste management are suggested.

Hazardous healthcare waste management in the Kingdom of Bahrain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohamed, L.F.; Ebrahim, S.A.; Al-Thukair, A.A.

2009-08-15

Hazardous healthcare waste has become an environmental concern for many developing countries including the Kingdom of Bahrain. There have been several significant obstacles facing the Kingdom in dealing with this issue including; limited documentation regarding generation, handling, management, and disposal of waste. This in turn hinders efforts to plan better healthcare waste management. In this paper, hazardous waste management status in the Kingdom has been investigated through an extensive survey carried out on selected public and private healthcare premises. Hazardous waste management practices including: waste generation, segregation, storage, collection, transportation, treatment, and disposal were determined. The results of this studymore » along with key findings are discussed and summarized. In addition; several effective recommendations and improvements of hazardous waste management are suggested.« less

Hydrology Analysis and Modelling for Klang River Basin Flood Hazard Map

NASA Astrophysics Data System (ADS)

Sidek, L. M.; Rostam, N. E.; Hidayah, B.; Roseli, ZA; Majid, W. H. A. W. A.; Zahari, N. Z.; Salleh, S. H. M.; Ahmad, R. D. R.; Ahmad, M. N.

2016-03-01

Flooding, a common environmental hazard worldwide has in recent times, increased as a result of climate change and urbanization with the effects felt more in developing countries. As a result, the explosive of flooding to Tenaga Nasional Berhad (TNB) substation is increased rapidly due to existing substations are located in flood prone area. By understanding the impact of flood to their substation, TNB has provided the non-structure mitigation with the integration of Flood Hazard Map with their substation. Hydrology analysis is the important part in providing runoff as the input for the hydraulic part.

Automated Purgatoid Identification: Final Report

NASA Technical Reports Server (NTRS)

Wood, Steven

2011-01-01

Driving on Mars is hazardous: technical problems and unforeseen natural hazards can end a mission quickly at the worst, or result in long delays at best. This project is focused on helping to mitigate hazards posed to rovers by purgatoids: small (less than 1 m high, less than 10 m wide), ripple-like eolian bedforms commonly found scattered across the Meridiani Planum region of Mars. Due to the poorly consolidated nature of purgatoids and multiple past episodes of rovers getting stuck in them, identification and avoidance of these eolian bedforms is an important feature of rover path planning (NASA, 2011).

Hazards to Early Development: The Biological Embedding of Early Life Adversity.

PubMed

Nelson, Charles A

2017-10-11

The number of children under 18 years of age has increased worldwide over the past decade. This growth spurt is due, in part, to remarkable progress in child survival. Alas, surviving early hazards, like prematurity or infectious disease, does not guarantee that children's development will not be compromised by other hazards as they grow older. Throughout the world, children continue to be confronted with a large number of biological and psychosocial challenges that greatly limit their developmental potential. The focus of this article is how such adverse experiences impact the developing brain. Copyright © 2017 Elsevier Inc. All rights reserved.

Solar cosmic ray hazard to interplanetary and earth-orbital space travel

NASA Technical Reports Server (NTRS)

Yucker, W. R.

1972-01-01

A statistical treatment of the radiation hazards to astronauts due to solar cosmic ray protons is reported to determine shielding requirements for solar proton events. More recent data are incorporated into the present analysis in order to improve the accuracy of the predicted mission fluence and dose. The effects of the finite data sample are discussed. Mission fluence and dose versus shield thickness data are presented for mission lengths up to 3 years during periods of maximum and minimum solar activity; these correspond to various levels of confidence that the predicted hazard will not be exceeded.

New approaches to wipe sampling methods for antineoplastic and other hazardous drugs in healthcare settings.

PubMed

Connor, Thomas H; Smith, Jerome P

2016-09-01

At the present time, the method of choice to determine surface contamination of the workplace with antineoplastic and other hazardous drugs is surface wipe sampling and subsequent sample analysis with a variety of analytical techniques. The purpose of this article is to review current methodology for determining the level of surface contamination with hazardous drugs in healthcare settings and to discuss recent advances in this area. In addition it will provide some guidance for conducting surface wipe sampling and sample analysis for these drugs in healthcare settings. Published studies on the use of wipe sampling to measure hazardous drugs on surfaces in healthcare settings drugs were reviewed. These studies include the use of well-documented chromatographic techniques for sample analysis in addition to newly evolving technology that provides rapid analysis of specific antineoplastic. Methodology for the analysis of surface wipe samples for hazardous drugs are reviewed, including the purposes, technical factors, sampling strategy, materials required, and limitations. The use of lateral flow immunoassay (LFIA) and fluorescence covalent microbead immunosorbent assay (FCMIA) for surface wipe sample evaluation is also discussed. Current recommendations are that all healthc a re settings where antineoplastic and other hazardous drugs are handled include surface wipe sampling as part of a comprehensive hazardous drug-safe handling program. Surface wipe sampling may be used as a method to characterize potential occupational dermal exposure risk and to evaluate the effectiveness of implemented controls and the overall safety program. New technology, although currently limited in scope, may make wipe sampling for hazardous drugs more routine, less costly, and provide a shorter response time than classical analytical techniques now in use.

Safety parameters for avoiding acute ocular damage from the reflected CO2 (10.6 microns) laser beam.

PubMed

Friedman, N R; Saleeby, E R; Rubin, M G; Sandu, T; Krull, E A

1987-11-01

Reflections from instruments in the surgical field involving the CO2 laser beam present a serious ocular hazard. In addition to the use of plastic or glass protective eyewear, this hazard can be minimized by utilizing anodized instruments and recognizing the specific distances at which various reflections are no longer hazardous depending upon certain variables, including laser output wattage, emergent beam lengths, and surface characteristics of the reflecting instruments.

40 CFR 721.1550 - Benzenediazonium, 4-(di-methyl-amino)-, salt with 2-hy-droxy-5-sul-fo-benzoic acid (1:1).

Code of Federal Regulations, 2014 CFR

2014-07-01

...). In addition, the following human health hazard statement shall appear on each label as specified at... they are true and do not alter the meaning of the required statement. Human health hazard statements...

40 CFR 721.1550 - Benzenediazonium, 4-(di-methyl-amino)-, salt with 2-hy-droxy-5-sul-fo-benzoic acid (1:1).

Code of Federal Regulations, 2012 CFR

2012-07-01

...). In addition, the following human health hazard statement shall appear on each label as specified at... they are true and do not alter the meaning of the required statement. Human health hazard statements...

16 CFR § 1302.4 - Banned hazardous products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... flammable contact adhesive and similar liquid or semiliquid consumer product as defined in § 1302.3 (b... hazardous product. In addition, any other extremely flammable contact adhesive and similar liquid or... § 1302.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT...

40 CFR 63.4561 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products... mass of organic HAP in coatings, thinners and/or other additives, or cleaning materials that have been...

40 CFR 63.3961 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts.... You do not need to redetermine the mass of organic HAP in coatings, thinners and/or other additives...

40 CFR 63.4561 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and... mass of organic HAP in coatings, thinners and/or other additives, or cleaning materials that have been...

40 CFR 63.4561 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and... mass of organic HAP in coatings, thinners and/or other additives, or cleaning materials that have been...

Hazard banding in compliance with the new Globally Harmonised System (GHS) for use in control banding tools.

PubMed

Arnone, Mario; Koppisch, Dorothea; Smola, Thomas; Gabriel, Stefan; Verbist, Koen; Visser, Remco

2015-10-01

Many control banding tools use hazard banding in risk assessments for the occupational handling of hazardous substances. The outcome of these assessments can be combined with advice for the required risk management measures (RMMs). The Globally Harmonised System of Classification and Labelling of Chemicals (GHS) has resulted in a change in the hazard communication elements, i.e. Hazard (H) statements instead of Risk-phrases. Hazard banding schemes that depend on the old form of safety information have to be adapted to the new rules. The purpose of this publication is to outline the rationales for the assignment of hazard bands to H statements under the GHS. Based on this, this publication proposes a hazard banding scheme that uses the information from the safety data sheets as the basis for assignment. The assignment of hazard bands tiered according to the severity of the underlying hazards supports the important principle of substitution. Additionally, the set of assignment rules permits an exposure-route-specific assignment of hazard bands, which is necessary for the proposed route-specific RMMs. Ideally, all control banding tools should apply the same assignment rules. This GHS-compliant hazard banding scheme can hopefully help to establish a unified hazard banding strategy in the various control banding tools. Copyright © 2015 Elsevier Inc. All rights reserved.

Copper recovery and cyanide oxidation by electrowinning from a spent copper-cyanide electroplating electrolyte.

PubMed

Dutra, A J B; Rocha, G P; Pombo, F R

2008-04-01

Copper-cyanide bleed streams arise from contaminated baths from industrial electroplating processes due to the buildup of impurities during continuous operation. These streams present an elevated concentration of carbonate, cyanide and copper, constituting a heavy hazard, which has to be treated for cyanide destruction and heavy metals removal, according to the local environmental laws. In the Brazilian Mint, bleed streams are treated with sodium hypochlorite, to destroy cyanide and precipitate copper hydroxide, a solid hazardous waste that has to be disposed properly in a landfill or treated for metal recovery. In this paper, a laboratory-scale electrolytic cell was developed to remove the copper from the bleed stream of the electroplating unit of the Brazilian Mint, permitting its reutilization in the plant and decreasing the amount of sludge to waste. Under favorable conditions copper recoveries around 99.9% were achieved, with an energy consumption of about 11 kWh/kg, after a 5-h electrolysis of a bath containing copper and total cyanide concentrations of 26 and 27 g/L, respectively. Additionally, a substantial reduction of the cyanide concentration was also achieved, decreasing the pollution load and final treatment costs.

Using instrumental variables to estimate a Cox's proportional hazards regression subject to additive confounding

PubMed Central

Tosteson, Tor D.; Morden, Nancy E.; Stukel, Therese A.; O'Malley, A. James

2014-01-01

The estimation of treatment effects is one of the primary goals of statistics in medicine. Estimation based on observational studies is subject to confounding. Statistical methods for controlling bias due to confounding include regression adjustment, propensity scores and inverse probability weighted estimators. These methods require that all confounders are recorded in the data. The method of instrumental variables (IVs) can eliminate bias in observational studies even in the absence of information on confounders. We propose a method for integrating IVs within the framework of Cox's proportional hazards model and demonstrate the conditions under which it recovers the causal effect of treatment. The methodology is based on the approximate orthogonality of an instrument with unobserved confounders among those at risk. We derive an estimator as the solution to an estimating equation that resembles the score equation of the partial likelihood in much the same way as the traditional IV estimator resembles the normal equations. To justify this IV estimator for a Cox model we perform simulations to evaluate its operating characteristics. Finally, we apply the estimator to an observational study of the effect of coronary catheterization on survival. PMID:25506259

Using instrumental variables to estimate a Cox's proportional hazards regression subject to additive confounding.

PubMed

MacKenzie, Todd A; Tosteson, Tor D; Morden, Nancy E; Stukel, Therese A; O'Malley, A James

2014-06-01

The estimation of treatment effects is one of the primary goals of statistics in medicine. Estimation based on observational studies is subject to confounding. Statistical methods for controlling bias due to confounding include regression adjustment, propensity scores and inverse probability weighted estimators. These methods require that all confounders are recorded in the data. The method of instrumental variables (IVs) can eliminate bias in observational studies even in the absence of information on confounders. We propose a method for integrating IVs within the framework of Cox's proportional hazards model and demonstrate the conditions under which it recovers the causal effect of treatment. The methodology is based on the approximate orthogonality of an instrument with unobserved confounders among those at risk. We derive an estimator as the solution to an estimating equation that resembles the score equation of the partial likelihood in much the same way as the traditional IV estimator resembles the normal equations. To justify this IV estimator for a Cox model we perform simulations to evaluate its operating characteristics. Finally, we apply the estimator to an observational study of the effect of coronary catheterization on survival.

Challenges and Issues of Radiation Damage Tools for Space Missions

NASA Astrophysics Data System (ADS)

Tripathi, Ram; Wilson, John

2006-04-01

NASA has a new vision for space exploration in the 21st Century encompassing a broad range of human and robotic missions including missions to Moon, Mars and beyond. Exposure from the hazards of severe space radiation in deep space long duration missions is `the show stopper.' Thus, protection from the hazards of severe space radiation is of paramount importance for the new vision. Accurate risk assessments critically depend on the accuracy of the input information about the interaction of ions with materials, electronics and tissues. A huge amount of essential experimental information for all the ions in space, across the periodic table, for a wide range of energies of several (up to a Trillion) orders of magnitude are needed for the radiation protection engineering for space missions that is simply not available (due to the high costs) and probably never will be. In addition, the accuracy of the input information and database is very critical and of paramount importance for space exposure assessments particularly in view the agency's vision for deep space exploration. The vital role and importance of nuclear physics, related challenges and issues, for space missions will be discussed, and a few examples will be presented for space missions.

EDCs Mixtures: A Stealthy Hazard for Human Health?

PubMed

Ribeiro, Edna; Ladeira, Carina; Viegas, Susana

2017-02-07

Endocrine disrupting chemicals (EDCs) are exogenous chemicals that may occur naturally (e.g., phytoestrogens), while others are industrial substances and plasticizers commonly utilized worldwide to which human exposure, particularly at low-doses, is omnipresent, persistent and occurs in complex mixtures. EDCs can interfere with/or mimic estrogenic hormones and, consequently, can simultaneously trigger diverse signaling pathways which result in diverse and divergent biological responses. Additionally, EDCs can also bioaccumulate in lipid compartments of the organism forming a mixed "body burden" of contaminants. Although the independent action of chemicals has been considered the main principle in EDCs mixture toxicity, recent studies have demonstrated that numerous effects cannot be predicted when analyzing single compounds independently. Co-exposure to these agents, particularly in critical windows of exposure, may induce hazardous health effects potentially associated with a complex "body burden" of different origins. Here, we performed an exhaustive review of the available literature regarding EDCs mixtures exposure, toxicity mechanisms and effects, particularly at the most vulnerable human life stages. Although the assessment of potential risks to human health due to exposure to EDCs mixtures is a major topic for consumer safety, information regarding effective mixtures effects is still scarce.

Modeling the resilience of critical infrastructure: the role of network dependencies.

PubMed

Guidotti, Roberto; Chmielewski, Hana; Unnikrishnan, Vipin; Gardoni, Paolo; McAllister, Therese; van de Lindt, John

2016-01-01

Water and wastewater network, electric power network, transportation network, communication network, and information technology network are among the critical infrastructure in our communities; their disruption during and after hazard events greatly affects communities' well-being, economic security, social welfare, and public health. In addition, a disruption in one network may cause disruption to other networks and lead to their reduced functionality. This paper presents a unified theoretical methodology for the modeling of dependent/interdependent infrastructure networks and incorporates it in a six-step probabilistic procedure to assess their resilience. Both the methodology and the procedure are general, can be applied to any infrastructure network and hazard, and can model different types of dependencies between networks. As an illustration, the paper models the direct effects of seismic events on the functionality of a potable water distribution network and the cascading effects of the damage of the electric power network (EPN) on the potable water distribution network (WN). The results quantify the loss of functionality and delay in the recovery process due to dependency of the WN on the EPN. The results show the importance of capturing the dependency between networks in modeling the resilience of critical infrastructure.

Modeling the resilience of critical infrastructure: the role of network dependencies

PubMed Central

Guidotti, Roberto; Chmielewski, Hana; Unnikrishnan, Vipin; Gardoni, Paolo; McAllister, Therese; van de Lindt, John

2017-01-01

Water and wastewater network, electric power network, transportation network, communication network, and information technology network are among the critical infrastructure in our communities; their disruption during and after hazard events greatly affects communities’ well-being, economic security, social welfare, and public health. In addition, a disruption in one network may cause disruption to other networks and lead to their reduced functionality. This paper presents a unified theoretical methodology for the modeling of dependent/interdependent infrastructure networks and incorporates it in a six-step probabilistic procedure to assess their resilience. Both the methodology and the procedure are general, can be applied to any infrastructure network and hazard, and can model different types of dependencies between networks. As an illustration, the paper models the direct effects of seismic events on the functionality of a potable water distribution network and the cascading effects of the damage of the electric power network (EPN) on the potable water distribution network (WN). The results quantify the loss of functionality and delay in the recovery process due to dependency of the WN on the EPN. The results show the importance of capturing the dependency between networks in modeling the resilience of critical infrastructure. PMID:28825037

EDCs Mixtures: A Stealthy Hazard for Human Health?

PubMed Central

Ribeiro, Edna; Ladeira, Carina; Viegas, Susana

2017-01-01

Endocrine disrupting chemicals (EDCs) are exogenous chemicals that may occur naturally (e.g., phytoestrogens), while others are industrial substances and plasticizers commonly utilized worldwide to which human exposure, particularly at low-doses, is omnipresent, persistent and occurs in complex mixtures. EDCs can interfere with/or mimic estrogenic hormones and, consequently, can simultaneously trigger diverse signaling pathways which result in diverse and divergent biological responses. Additionally, EDCs can also bioaccumulate in lipid compartments of the organism forming a mixed “body burden” of contaminants. Although the independent action of chemicals has been considered the main principle in EDCs mixture toxicity, recent studies have demonstrated that numerous effects cannot be predicted when analyzing single compounds independently. Co-exposure to these agents, particularly in critical windows of exposure, may induce hazardous health effects potentially associated with a complex “body burden” of different origins. Here, we performed an exhaustive review of the available literature regarding EDCs mixtures exposure, toxicity mechanisms and effects, particularly at the most vulnerable human life stages. Although the assessment of potential risks to human health due to exposure to EDCs mixtures is a major topic for consumer safety, information regarding effective mixtures effects is still scarce. PMID:29051438

Debris Hazards Due to Overloaded Conventional Construction Facades

DTIC Science & Technology

2015-12-01

hazards to buildings. This work will present results for experiments involving conventional façade materials (glass, concrete , and mason- ry) that have...ex- periments and a discussion of the distribution parameters are presented. Keywords: Blast, fragmentation, concrete , masonry, debris... concrete , glass, and concrete masonry. It was also desired to produce data for which the state of stress and strain rates could be estimated. There were

Building a flood hazard map due to magma effusion into the caldera lake of the Baekdusan Volcano

NASA Astrophysics Data System (ADS)

Lee, K.; Kim, S.; Yun, S.; Yu, S.; Kim, I.

2013-12-01

Many volcanic craters and calderas are filled with large amounts of water that can pose significant flood hazards to downstream communities due to their high elevation and the potential for catastrophic releases of water. Recent reports pointed out the Baekdusan volcano that is located between the border of China and North Korea as a potential active volcano. Since Millennium Eruption around 1000 AD, smaller eruptions have occurred at roughly 100-year intervals, with the last one in 1903. The volcano is showing signs of waking from a century-long slumber recently and the volcanic ash may spread up to the northeastern of Japan. The development of various forecasting techniques to prevent and minimize economic and social damage is in urgent need. Floods from lake-filled calderas may be particularly large and high. Volcanic flood may cause significant hydrologic hazards for this reason. This study focuses on constructing a flood hazard map triggered by the uplift of lake bottom due to magma effusion in the Baekdusan volcano. A physically-based uplift model was developed to compute the amount of water and time to peak flow. The ordinary differential equation was numerically solved using the finite difference method and Newton-Raphson iteration method was used to solve nonlinear equation. The magma effusion rate into the caldera lake is followed by the past record from other volcanic activities. As a result, the hydrograph serves as an upper boundary condition when hydrodynamic model (Flo-2D) runs to simulate channel routing downstream. The final goal of the study stresses the potential flood hazard represented by the huge volume of water in the caldera lake, the unique geography, and the limited control capability. he study will contribute to build a geohazard map for the decision-makers and practitioners. Keywords: Effusion rate, Volcanic flood, Caldera lake, Uplift, Flood hazard map Acknowledgement This research was supported by a grant [NEMA-BAEKDUSAN-2012-1-2] from the Volcanic Disaster Preparedness Research Center sponsored by National Emergency Management Agency of Korea. Inundation map triggered by magma effusion simulated by Flo-2D

CyberShake: Running Seismic Hazard Workflows on Distributed HPC Resources

NASA Astrophysics Data System (ADS)

Callaghan, S.; Maechling, P. J.; Graves, R. W.; Gill, D.; Olsen, K. B.; Milner, K. R.; Yu, J.; Jordan, T. H.

2013-12-01

As part of its program of earthquake system science research, the Southern California Earthquake Center (SCEC) has developed a simulation platform, CyberShake, to perform physics-based probabilistic seismic hazard analysis (PSHA) using 3D deterministic wave propagation simulations. CyberShake performs PSHA by simulating a tensor-valued wavefield of Strain Green Tensors, and then using seismic reciprocity to calculate synthetic seismograms for about 415,000 events per site of interest. These seismograms are processed to compute ground motion intensity measures, which are then combined with probabilities from an earthquake rupture forecast to produce a site-specific hazard curve. Seismic hazard curves for hundreds of sites in a region can be used to calculate a seismic hazard map, representing the seismic hazard for a region. We present a recently completed PHSA study in which we calculated four CyberShake seismic hazard maps for the Southern California area to compare how CyberShake hazard results are affected by different SGT computational codes (AWP-ODC and AWP-RWG) and different community velocity models (Community Velocity Model - SCEC (CVM-S4) v11.11 and Community Velocity Model - Harvard (CVM-H) v11.9). We present our approach to running workflow applications on distributed HPC resources, including systems without support for remote job submission. We show how our approach extends the benefits of scientific workflows, such as job and data management, to large-scale applications on Track 1 and Leadership class open-science HPC resources. We used our distributed workflow approach to perform CyberShake Study 13.4 on two new NSF open-science HPC computing resources, Blue Waters and Stampede, executing over 470 million tasks to calculate physics-based hazard curves for 286 locations in the Southern California region. For each location, we calculated seismic hazard curves with two different community velocity models and two different SGT codes, resulting in over 1100 hazard curves. We will report on the performance of this CyberShake study, four times larger than previous studies. Additionally, we will examine the challenges we face applying these workflow techniques to additional open-science HPC systems and discuss whether our workflow solutions continue to provide value to our large-scale PSHA calculations.

Seismic hazard map of the western hemisphere

USGS Publications Warehouse

Shedlock, K.M.; Tanner, J.G.

1999-01-01

Vulnerability to natural disasters increases with urbanization and development of associated support systems (reservoirs, power plants, etc.). Catastrophic earthquakes account for 60% of worldwide casualties associated with natural disasters. Economic damage from earthquakes is increasing, even in technologically advanced countries with some level of seismic zonation, as shown by the 1989 Loma Prieta, CA ($6 billion), 1994 Northridge, CA ($ 25 billion), and 1995 Kobe, Japan (> $ 100 billion) earthquakes. The growth of megacities in seismically active regions around the world often includes the construction of seismically unsafe buildings and infrastructures, due to an insufficient knowledge of existing seismic hazard. Minimization of the loss of life, property damage, and social and economic disruption due to earthquakes depends on reliable estimates of seismic hazard. National, state, and local governments, decision makers, engineers, planners, emergency response organizations, builders, universities, and the general public require seismic hazard estimates for land use planning, improved building design and construction (including adoption of building construction codes), emergency response preparedness plans, economic forecasts, housing and employment decisions, and many more types of risk mitigation. The seismic hazard map of the Americas is the concatenation of various national and regional maps, involving a suite of approaches. The combined maps and documentation provide a useful global seismic hazard framework and serve as a resource for any national or regional agency for further detailed studies applicable to their needs. This seismic hazard map depicts Peak Ground Acceleration (PGA) with a 10% chance of exceedance in 50 years for the western hemisphere. PGA, a short-period ground motion parameter that is proportional to force, is the most commonly mapped ground motion parameter because current building codes that include seismic provisions specify the horizontal force a building should be able to withstand during an earthquake. This seismic hazard map of the Americas depicts the likely level of short-period ground motion from earthquakes in a fifty-year window. Short-period ground motions effect short-period structures (e.g., one-to-two story buildings). The largest seismic hazard values in the western hemisphere generally occur in areas that have been, or are likely to be, the sites of the largest plate boundary earthquakes. Although the largest earthquakes ever recorded are the 1960 Chile and 1964 Alaska subduction zone earthquakes, the largest seismic hazard (PGA) value in the Americas is in Southern California (U.S.), along the San Andreas fault.

Monitoring and forecasting local landslide hazard in the area of Longyearbyen, Svalbard - early progress and experiences from the Autumn 2016 events

NASA Astrophysics Data System (ADS)

Wang, Thea; Krøgli, Ingeborg; Boje, Søren; Colleuille, Hervé

2017-04-01

Since 2013 the Norwegian Water Resources and Energy Directorate (NVE) has operated a landslide early warning system (LEWS) for mainland Norway. The Svalbard islands, situated 800 km north of the Norwegian mainland, and 1200 km from the North Pole, are not part of the conventional early warning service. However, following the fatal snow avalanche event 19 Dec. 2015 in the settlement of Longyearbyen (78° north latitude), local authorities and the NVE have initiated monitoring of the hydro-meteorological conditions for the area of Longyearbyen, as an extraordinary precaution. Two operational forecasting teams from the NVE; the snow avalanche and the landslide hazard forecasters, perform hazard assessment related to snow avalanches, slush flows, debris flows, shallow slides and local flooding. This abstract will focus on recent experiences made by the landslide hazard team during the autumn 2016 landslide events, caused by a record setting wet and warm summer and autumn of 2016. The general concept of the Norwegian LEWS is based on frequency intervals of extreme hydro-meteorological conditions. This general concept has been transposed to the Longyearbyen area. Although the climate is considerably colder and drier than mainland Norway, experiences so far are positive and seem useful to the local authorities. Initially, the landslide hazard evaluation was intended to consider only slush flow hazard during the snow covered season. However, due to the extraordinary warm and wet summer and autumn 2016, the landslide hazard forecasters unexpectedly had to issue warnings for the local authorities due to increased risk of shallow landslides and debris flows. This was done in close cooperation with the Norwegian Meteorological Institute, who provided weather forecasts from the recently developed weather prediction model, AROME-Arctic. Two examples, from 14-15 Oct and 8-9 Nov 2016, will be given to demonstrate how the landslide hazard assessment for the Longyearbyen area is carried out. Several aspects contrast hazard monitoring and forecasting on the mainland, such as the challenges that transpire with sparse observations of hydrometeorologial variables, landslide inventories and hydrological simulations. Particular challenges that are faced on Svalbard, are the even greater remoteness of the settlements and the strong effect permafrost has on the soil structure. The planned development for improving the monitoring of slush avalanches and landslide hazards in the Longyearbyen area will also be presented.

MARSite-MARMARA SUPERSITE: Accomplishments and Outlook

NASA Astrophysics Data System (ADS)

Meral Ozel, Nurcan; Necmioglu, Ocal; Ergintav, Semih; Oguz Ozel, Asım; Italiano, Franco; Favali, Paolo; Bigarre, Pascal; Cakir, Ziyadin; Geli, Louis; Aochi, Hideo; Bossu, Remy; Zulfikar, Can; Sesetyan, Karin

2017-04-01

MARsite Project, funded under FP7-ENV.2012 6.4-2 (Grant 308417) and successfully implemented to Marmara Region during 2014-2016 indicated that focusing on the monitoring of the region and the integration of data from land, sea and space and the processing of this composed data based on sound earth-science research is an effective tool for mitigating damage from future earthquakes. This was achieved by monitoring the earthquake hazard through the ground-shaking and forecast maps, short- and long-term earthquake rate forecasting and time-dependent seismic hazard maps to make important risk-mitigation decisions regarding building design, insurance rates, land-use planning, and public-policy issues that need to balance safety and economic and social interests. MARSite has demonstrated the power of the use of different sensors in the assessment of the earthquake hazard. In addition to the more than 30 scientific publication within the MARsite Project framework, a multidisciplinary innovative borehole seismic observatory and a dilatometer have been installed within MARSite where its a data can be used for a range of seismic studies. Due to the encouraging results obtained from this experiment, it was determined that in the future likely smaller number of stations will be required reducing the cost of national seismic networks. The technical infrastructure of the continuous GPS stations of MAGNET network has been updated within MARSite. Tsunami hazard studies in MARSite in Marmara Sea showed that the tsunami hazard in the Marmara Region is primarily due to submarine landslides triggered by an earthquake and a conceptual Tsunami Early Warning System in the Marmara region strongly coupled with the strong ground motion and existing Earthquake Early Warning System was developed. The existing Earthquake Early Warning and Rapid Response system in the Marmara Region was improved and the installation and test of a pilot seismic landslide monitoring system was taken place in the Avcilar-Beylikdüzü Peninsula, a large landslide prone area located in westward part of Istanbul and facing the North Anatolian Fault Zone (NAFZ). An integrated approach based on multi-parameter seafloor observatories was implemented to continuously monitor the micro-seismicity along with the fluid expulsion activity within the submerged fault zone. During MARSite, strong integration and links had been established with major European initiatives focused on the collection of multidisciplinary data, their dissemination, interpretation and fusion to produce consistent theoretical and practical models, the implementation of good practices so as to provide the necessary information to end users, and the updating of seismic hazard and risk evaluations in the Marmara region. In this perspective, to continue the understanding of and improvement in the preparedness for geological disasters, the existing monitoring infrastructure of Marsite requires the continuation of a strong a European initiative. This presentation will provide a venue for information exchange towards the establishment of such an initiative.

Global assessment of human losses due to earthquakes

USGS Publications Warehouse

Silva, Vitor; Jaiswal, Kishor; Weatherill, Graeme; Crowley, Helen

2014-01-01

Current studies have demonstrated a sharp increase in human losses due to earthquakes. These alarming levels of casualties suggest the need for large-scale investment in seismic risk mitigation, which, in turn, requires an adequate understanding of the extent of the losses, and location of the most affected regions. Recent developments in global and uniform datasets such as instrumental and historical earthquake catalogues, population spatial distribution and country-based vulnerability functions, have opened an unprecedented possibility for a reliable assessment of earthquake consequences at a global scale. In this study, a uniform probabilistic seismic hazard assessment (PSHA) model was employed to derive a set of global seismic hazard curves, using the open-source software OpenQuake for seismic hazard and risk analysis. These results were combined with a collection of empirical fatality vulnerability functions and a population dataset to calculate average annual human losses at the country level. The results from this study highlight the regions/countries in the world with a higher seismic risk, and thus where risk reduction measures should be prioritized.

A comparison of spacecraft penetration hazards due to meteoroids and manmade earth-orbiting objects

NASA Technical Reports Server (NTRS)

Brooks, D. R.

1976-01-01

The ability of a typical double-walled spacecraft structure to protect against penetration by high-velocity incident objects is reviewed. The hazards presented by meteoroids are compared to the current and potential hazards due to manmade orbiting objects. It is shown that the nature of the meteoroid number-mass relationship makes adequate protection for large space facilities a conceptually straightforward structural problem. The present level of manmade orbiting objects (an estimated 10,000 in early 1975) does not pose an unacceptable risk to manned space operations proposed for the near future, but it does produce penetration probabilities in the range of 1-10 percent for a 100-m diameter sphere in orbit for 1,000 days. The number-size distribution of manmade objects is such that adequate protection is difficult to achieve for large permanent space facilities, to the extent that future restrictions on such facilities may result if the growth of orbiting objects continues at its historical rate.

Environmental risk assessment of selected pharmaceuticals in Turkey.

PubMed

Oğuz, Merve; Mihçiokur, Hamdi

2014-07-01

In this study, environmental risks of selected pharmaceuticals were investigated to assess potential hazards. Ciprofloxacin, Clarithromycin, Cefuroxime axetil, antibiotics, Benzalkoniuman antiseptic, Paracetamol, an analgesic, and Naproxen, an anti-inflammatory, were selected due to their high rate of usage in Turkey. Ciprofloxacin was found to have the highest risk due to its high PEC/PNEC ratio (28.636). Benzalkonium, Paracetamol and Clarithromycin have a potential to cause environmental hazards. The biodegradation and biological concentration factors (BCF) of the drugs were also determined using EPA/STWIN and EPA/BCFWIN programs. The results illustrated that these pharmaceuticals are nonbiodegradable in wastewater treatment plants. The BCFs of Benzalkonium and Clarithromycin were found to be very high, 70.790 L/kg and 56.490 L/kg, respectively. It was suggested that alternative treatment methods other than biological ones should be investigated for these pharmaceuticals because of their low biodegradability. Also, unnecessary use of antibiotics is supposed to be discouraged to reduce environmental hazards. Copyright © 2014 Elsevier B.V. All rights reserved.

Food Safety Hazards and Microbiological Zoonoses in European Meat Imports Detected in Border Inspection in the Period 2008-2013.

PubMed

Jansen, W; Grabowski, N; Gerulat, B; Klein, G

2016-02-01

Microbiological contaminations and other food safety hazards are omnipresent within the European Union (EU) and a considerable risk for consumers, particularly in imported meat and meat products. The number of rejections at external EU borders has been increasing in recent years. Official authorities in each member state are therefore obliged to notify border rejections of food and animal feed due to a direct or indirect risk to human or animal health. This study explored the trends and temporal and spatial distribution of notifications on food safety hazards between January 2008 and December 2013 with a special emphasis on microbiological zoonoses in meat and meat products including poultry at border checks resulting from the rapid alert system for food and feed (RASFF). Results indicated that border rejection notifications are increasing exponentially, frequently due to Salmonella in poultry and shiga-toxin-producing E. coli in meat and meat products. © 2015 Blackwell Verlag GmbH.

Final Environmental Assessment for Camp Rudder Master Plan at Eglin Air Force Base, FL

DTIC Science & Technology

2005-06-07

warranting detailed analysis. Hazardous Materials The 6th RTB currently generates hazardous materials in the form of weapons cleaning products and...wastes. There would be no increase in the use of weapons cleaning products ; and therefore, this area does not require analysis. Additionally

77 FR 24885 - Hazardous Materials; Miscellaneous Amendments (RRR)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... ``Dried residue of molten sulfur on tank cars shall meet the `Molten Sulphur Rail Car Guidance Document... reference material in the HMR should provide rail shippers of molten sulfur with a greater situational... hazardous material. In addition, PHMSA proposes to revise the entries for ``Sulfur, Molten'' specified in...

77 FR 73289 - Hazardous Substances and Articles; Administration and Enforcement Regulations: Revisions to...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... recommends this approach to manufacturers who are labeling substances to indicate a hazard. Accordingly, the... test animals. Additionally, the routine use of topical anesthetics, systemic analgesics, and humane..., systemic analgesics, and humane endpoints to avoid or minimize pain and distress in ocular safety testing...

Effect of two different composts on soil quality and on the growth of various plant species in a polymetallic acidic mine soil.

PubMed

Rossini-Oliva, S; Mingorance, M D; Peña, A

2017-02-01

The effect of the addition (0-10%) of two types of sewage sludge composts (composted sewage sludge [CS] and sewage sludge co-composted with olive prune wastes [CSO]) on a polymetallic acidic soil from the Riotinto mining area was evaluated by i) a soil incubation experiment and ii) a greenhouse pot experiment using tomato (Solanum lycopersicum Mill.), ryegrass (Lolium perenne L.) and ahipa (Pachyrhizus ahipa (Wedd.) Parodi). Compost addition improved the soil organic carbon content, increased the pH and the electrical conductivity and enhanced enzyme activities and soil respiration, more for CSO than for CS. Plant growth was generally enhanced after compost addition, but not proportionally to the dose. Foliar concentrations of some hazardous elements (As, Cr, Fe) in tomato growing in non-amended soil were above the thresholds, questioning the adequacy of using this plant species. However, leaf concentrations of essential and potentially toxic elements (Fe, As, Cr and Pb) in tomato and/or ryegrass were reduced after the amendment with both composts, generally more for CSO than for CS. Conversely, foliar concentrations in ahipa, a plant species which is able to grow without the need of compost addition, were safe except for As and were only slightly affected by compost addition. This plant species would be a suitable candidate due to its low requirements and due to the limited element translocation to the leaves. Concerning the composts, amelioration of plant and soil properties was better accomplished when using CSO, a compost of sewage sludge and plant remains, than when using CS, which only contained the sludge. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of biological methods for a future methodological implementation of the Hazard criterion H14 'ecotoxic' in the European waste list (2000/532/EC).

PubMed

Moser, Heidrun; Roembke, Joerg; Donnevert, Gerhild; Becker, Roland

2011-02-01

The ecotoxicological characterization of waste is part of its assessment as hazardous or non-hazardous according to the European Waste List. For this classification 15 hazard criteria are derived from the Council Directive 91/689/EEC on hazardous waste. Some of the hazard criteria are based on the content of dangerous substances. The criterion H14 'ecotoxic' lacks of an assessment and testing strategy and no specific threshold values have been defined so far. Based on the recommendations of CEN guideline 14735 (2005), an international round robin test (ring test) was organized by the German Federal Environment Agency in order to define suitable test methods for the biological assessment of waste and waste eluates. A basic test battery, consisting of three aquatic and three terrestrial tests, was compiled. In addition, data were submitted for ten additional tests (five aquatic (including a genotoxicity test) and five terrestrial ones). The tests were performed with three representative waste types: an ash from an incineration plant, a soil containing high concentrations of organic contaminants (polycyclic aromatic hydrocarbons) and a preserved wood waste. The results of this ring test confirm that a combination of a battery of biological tests and chemical residual analysis is needed for an ecotoxicological characterization of wastes. With small modifications the basic test battery is considered to be well suitable for the hazard and risk assessment of wastes and waste eluates. All results and documents are accessible via a web-based data bank application.

Development of Multiple Primary Cancers in Lung Cancer Patients: Appalachian Versus Non-Appalachian Populations of Kentucky.

PubMed

Pravosud, Vira; Huang, Bin; Tucker, Thomas; Vanderford, Nathan L

2017-12-01

The aim of this study was to investigate whether patients with lung cancer in Appalachian Kentucky are more likely to develop multiple primary cancers than patients in non-Appalachian Kentucky. Additional analyses were conducted to identify other factors that may be associated with an increased hazard of developing multiple primary cancers in patients with lung cancer. The data for this retrospective, population-based cohort study of 26,456 primary lung cancer patients were drawn from the Kentucky Cancer Registry. For inclusion in the study, patients must have been diagnosed between January 1, 2000 and December 31, 2013 and they must either have continually resided in Appalachian Kentucky or continually resided in non-Appalachian Kentucky. Cases were excluded if the patient was diagnosed as having additional primary cancers within 3 months of the initial diagnosis of primary lung cancer. The medical records for each case were examined to determine whether the patient was subsequently diagnosed as having additional primary cancers. The Cox proportional hazards model was then used to assess whether there was an association between the region in which the patients live and the likelihood of developing multiple primary cancers. Time to event was considered as the time from diagnosis to either death or development of a second primary cancer. The results presented here indicate that the risk of developing multiple primary cancers is the same for patients with lung cancer throughout Kentucky (hazard ratio [HR] 1.002, P = 0.9713). We found no evidence for a greater hazard in patients from Appalachia; however, additional analyses revealed several high-risk groups. Male patients and older patients had a significantly greater hazard of developing multiple primary cancers (HR 1.169, P = 0.012 and 1.015, P = 0.0001, respectively). In addition, patients who underwent surgery and those who were diagnosed initially as having an earlier stage of cancer also were more likely to develop multiple primary cancers (HR 1.446, P = 0.0003 and 0.684, P = 0.0015, respectively). This is a negative study. Patients with primary lung cancer living in Appalachian Kentucky are not at a greater risk of developing multiple primary cancers than those residing in non-Appalachian Kentucky. High-risk groups identified in this study are male patients and older patients. The increased hazard seen in patients who underwent surgery or those who were diagnosed as having earlier stages of lung cancer are likely an artifact of these patients living longer and, therefore, having more time to develop additional primary cancers.

Additives in fibers and fabrics.

PubMed

Barker, R H

1975-06-01

The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments which are often applied to fabrics to achieve special effects include flame retardants, soil release agents, antistatic agents, softeners, water and/or oil repellents, ultraviolet absorbers, bacteriostats, and fungistats.

BIOAVAILABILITY OF METALS IN CONTAMINATED SOIL AND DUST

EPA Science Inventory

Due to widespread metal contamination, it is necessary to characterize soils suspected of metal contamination and determine if the metal levels in these soils pose a hazard. Metal toxicity is often not directly related to the total concentration of metals present due to a numb...

Landslide and Land Subsidence Hazards to Pipelines

USGS Publications Warehouse

Baum, Rex L.; Galloway, Devin L.; Harp, Edwin L.

2008-01-01

Landslides and land subsidence pose serious hazards to pipelines throughout the world. Many existing pipeline corridors and more and more new pipelines cross terrain that is affected by either landslides, land subsidence, or both. Consequently the pipeline industry recognizes a need for increased awareness of methods for identifying and evaluating landslide and subsidence hazard for pipeline corridors. This report was prepared in cooperation with the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration, and Pipeline Research Council International through a cooperative research and development agreement (CRADA) with DGH Consulting, Inc., to address the need for up-to-date information about current methods to identify and assess these hazards. Chapters in this report (1) describe methods for evaluating landslide hazard on a regional basis, (2) describe the various types of land subsidence hazard in the United States and available methods for identifying and quantifying subsidence, and (3) summarize current methods for investigating individual landslides. In addition to the descriptions, this report provides information about the relative costs, limitations and reliability of various methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Chemical Hazard Response Information System (CHRIS) is designed to provide timely information essential for proper decision-making by responsible Coast Guard personnel and others during emergencies involving the water transport of hazardous chemicals. A secondary purpose is the provision of certain basic non-emergency-related information to support the Coast Guard in its efforts to achieve improved levels of safety in the bulk shipment of hazardous chemicals. CHRIS consists of four reference guides or manuals, a regional contingency plan, a hazard-assessment computer system (HACS), and an organizational entity located at Coast Guard headquarters. The four manuals contain chemical data, hazard-assessment methods, andmore » response guides. Regional data for the entire coastline are included in the Coastal Regional Contingency Plans. The headquarters staff operates the hazard-assessment computer system and provides technical assistance on request by field personnel during emergencies. In addition, it is responsible for periodic update and maintenance of CHRIS. A brief description of each component of CHRIS and its relation to this manual - the Hazard-Assessment Handbook - is provided.« less

Environmental Pollution, Toxicity Profile and Treatment Approaches for Tannery Wastewater and Its Chemical Pollutants.

PubMed

Saxena, Gaurav; Chandra, Ram; Bharagava, Ram Naresh

Leather industries are key contributors in the economy of many developing countries, but unfortunately they are facing serious challenges from the public and governments due to the associated environmental pollution. There is a public outcry against the industry due to the discharge of potentially toxic wastewater having alkaline pH, dark brown colour, unpleasant odour, high biological and chemical oxygen demand, total dissolved solids and a mixture of organic and inorganic pollutants. Various environment protection agencies have prioritized several chemicals as hazardous and restricted their use in leather processing however; many of these chemicals are used and discharged in wastewater. Therefore, it is imperative to adequately treat/detoxify the tannery wastewater for environmental safety. This paper provides a detail review on the environmental pollution and toxicity profile of tannery wastewater and chemicals. Furthermore, the status and advances in the existing treatment approaches used for the treatment and/or detoxification of tannery wastewater at both laboratory and pilot/industrial scale have been reviewed. In addition, the emerging treatment approaches alone or in combination with biological treatment approaches have also been considered. Moreover, the limitations of existing and emerging treatment approaches have been summarized and potential areas for further investigations have been discussed. In addition, the clean technologies for waste minimization, control and management are also discussed. Finally, the international legislation scenario on discharge limits for tannery wastewater and chemicals has also been discussed country wise with discharge standards for pollution prevention due to tannery wastewater.

Characterization of Textiles Used in Chefs' Uniforms for Protection Against Thermal Hazards Encountered in the Kitchen Environment.

PubMed

Zhang, Han; McQueen, Rachel H; Batcheller, Jane C; Ehnes, Briana L; Paskaluk, Stephen A

2015-10-01

Within the kitchen the potential for burn injuries arising from contact with hot surfaces, flames, hot liquid, and steam hazards is high. The chef's uniform can potentially offer some protection against such burns by providing a protective barrier between the skin and the thermal hazard, although the extent to which can provide some protection is unknown. The purpose of this study was to examine whether fabrics used in chefs' uniforms were able to provide some protection against thermal hazards encountered in the kitchen. Fabrics from chefs' jackets and aprons were selected. Flammability of single- and multiple-layered fabrics was measured. Effect of jacket type, apron and number of layers on hot surface, hot water, and steam exposure was also measured. Findings showed that all of the jacket and apron fabrics rapidly ignited when exposed to a flame. Thermal protection against hot surfaces increased as layers increased due to more insulation. Protection against steam and hot water improved with an impermeable apron in the system. For wet thermal hazards increasing the number of permeable layers can decrease the level of protection due to stored thermal energy. As the hands and arms are most at risk of burn injury increased insulation and water-impermeable barrier in the sleeves would improve thermal protection with minimal compromise to overall thermal comfort. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Investigating Surface and Near-Surface Bushfire Fuel Attributes: A Comparison between Visual Assessments and Image-Based Point Clouds.

PubMed

Spits, Christine; Wallace, Luke; Reinke, Karin

2017-04-20

Visual assessment, following guides such as the Overall Fuel Hazard Assessment Guide (OFHAG), is a common approach for assessing the structure and hazard of varying bushfire fuel layers. Visual assessments can be vulnerable to imprecision due to subjectivity between assessors, while emerging techniques such as image-based point clouds can offer land managers potentially more repeatable descriptions of fuel structure. This study compared the variability of estimates of surface and near-surface fuel attributes generated by eight assessment teams using the OFHAG and Fuels3D, a smartphone method utilising image-based point clouds, within three assessment plots in an Australian lowland forest. Surface fuel hazard scores derived from underpinning attributes were also assessed. Overall, this study found considerable variability between teams on most visually assessed variables, resulting in inconsistent hazard scores. Variability was observed within point cloud estimates but was, however, on average two to eight times less than that seen in visual estimates, indicating greater consistency and repeatability of this method. It is proposed that while variability within the Fuels3D method may be overcome through improved methods and equipment, inconsistencies in the OFHAG are likely due to the inherent subjectivity between assessors, which may be more difficult to overcome. This study demonstrates the capability of the Fuels3D method to efficiently and consistently collect data on fuel hazard and structure, and, as such, this method shows potential for use in fire management practices where accurate and reliable data is essential.

Lessons Learned from the Fukushima Nuclear Accident due to Tohoku Region Pacific Coast Earthquake

NASA Astrophysics Data System (ADS)

Miki, M.; Wada, M.; Takeuchi, N.

2012-01-01

On March 11 2011, Great Eastern Japan Earthquake hit Japan and caused the devastating damage. Fukushima Nuclear Power Station (NPS) also suffered damages and provided the environmental effect with radioactive products. The situation has been settled to some extent about two months after the accidents, and currently, the cooling of reactor is continuing towards settling the situation. Japanese NPSs are designed based on safety requirements and have multiple-folds of hazard controls. However, according to publicly available information, due to the lager-than-anticipated Tsunami, all the power supply were lost, which resulted in loss of hazard controls. Also, although nuclear power plants are equipped with system/procedure in case of loss of all controls, recovery was not made as planned in Fukushima NPSs because assumptions for hazard controls became impractical or found insufficient. In consequence, a state of emergency was declared. Through this accident, many lessons learned have been obtained from the several perspectives. There are many commonality between nuclear safety and space safety. Both industries perform thorough hazard assessments because hazards in both industries can result in loss of life. Therefore, space industry must learn from this accident and reconsider more robust space safety. This paper will introduce lessons learned from Fukushima nuclear accident described in the "Report of the Japanese Government to the IAEA Ministerial Conference on Nuclear Safety" [1], and discuss the considerations to establish more robust safety in the space systems. Detailed information of Fukushima Dai-ichi NPS are referred to this report.

Seattle - seeking balance between the Space Needle, Starbucks, the Seahawks, and subduction

NASA Astrophysics Data System (ADS)

Vidale, J. E.

2012-12-01

Seattle has rich natural hazards. Lahars from Mount Rainier flow from the south, volcanic ash drifts from the East, the South Whidbey Island fault lies north and east, the Cascadia subduction zone dives underfoot from the west, and the Seattle fault lies just below the surface. Past and future landslides are sprinkled democratically across the surface, and Lake Washington and Puget Sound are known to seiche. All are ultimately due to subduction tectonics. As in most tectonically-exposed cities, the hazards are due mainly (1) to the buildings predating the relatively recent revelation that faulting here is active, (2) transportation corridors built long ago that are aging without a good budget for renewal, and (3) the unknown unknowns. These hazards are hard to quantify. Only the largest earthquakes on the Cascadia megathrust have a 10,000-year history, and even for them the down-dip rupture limits, stress drop and attenuation have unacceptable uncertainty. For the threatening faults closer in the upper crust, written history is short, glacial erosion and blanketing preclude many geophysical investigations, and healthy forests frustrate InSAR. On the brighter side, the direct hazard of earthquake shaking is being addressed as well as it can be. The current seismic hazard estimate is derived by methods among the most sophisticated in the world. Logic trees informed by consensus forged from a series of workshops delineate the scenarios. Finite difference calculations that include the world-class deep and soggy basins project the shaking from fault to vulnerable city. One useful cartoon synthesizing the earthquake hazard, based on Art Frankel's report, is shown below. It illustrates that important areas will be strongly shaken, and issues remain to be addressed. Fortunately, with great coffee and good perspective, we are moving toward improved disaster preparedness and resilience.

LOX, GOX and Pressure Relief

NASA Technical Reports Server (NTRS)

McLeod, Ken; Stoltzfus, Joel

2006-01-01

Oxygen relief systems present a serious fire hazard risk with often severe consequences. This presentation offers a risk management solution strategy which encourages minimizing ignition hazards, maximizing best materials, and utilizing good practices. Additionally, the relief system should be designed for cleanability and ballistic flow. The use of the right metals, softgoods, and lubricants, along with the best assembly techniques, is stressed. Materials should also be tested if data is not available and a full hazard analysis should be conducted in an effort to minimize risk and harm.

Environmental Assessment Preparation for Air Force Test Mission in the 21st Century: Upgrade and Improve the Test Capability at the Edwards AFB Test Complex

DTIC Science & Technology

2015-04-01

Hazardous Materials and Wastes: Under all Alternatives, any hazardous substances, including soil, groundwater, asbestos -containing material, lead-based...within ERP contamination plumes and hazardous materials such as asbestos or lead-based paint in bui ldings. Additionally, Alternative 3 could potentially...April 2015 v ACRONYMS AND ABBREVIATIONS µg/m3 micrograms per cubic meter of air ACHP Advisory Council on Historic Preservation ACM asbestos

[A large-scale accident in Alpine terrain].

PubMed

Wildner, M; Paal, P

2015-02-01

Due to the geographical conditions, large-scale accidents amounting to mass casualty incidents (MCI) in Alpine terrain regularly present rescue teams with huge challenges. Using an example incident, specific conditions and typical problems associated with such a situation are presented. The first rescue team members to arrive have the elementary tasks of qualified triage and communication to the control room, which is required to dispatch the necessary additional support. Only with a clear "concept", to which all have to adhere, can the subsequent chaos phase be limited. In this respect, a time factor confounded by adverse weather conditions or darkness represents enormous pressure. Additional hazards are frostbite and hypothermia. If priorities can be established in terms of urgency, then treatment and procedure algorithms have proven successful. For evacuation of causalities, a helicopter should be strived for. Due to the low density of hospitals in Alpine regions, it is often necessary to distribute the patients over a wide area. Rescue operations in Alpine terrain have to be performed according to the particular conditions and require rescue teams to have specific knowledge and expertise. The possibility of a large-scale accident should be considered when planning events. With respect to optimization of rescue measures, regular training and exercises are rational, as is the analysis of previous large-scale Alpine accidents.

Application of LANDSAT data to delimitation of avalanche hazards in Montane Colorado

NASA Technical Reports Server (NTRS)

Knepper, D. H., Jr. (Principal Investigator)

1977-01-01

The author has identified the following significant results. Many avalanche hazard zones can be identified on LANDSAT imagery, but not consistently over a large region. Therefore, regional avalanche hazard mapping, using LANDSAT imagery, must draw on additional sources of information. A method was devised that depicts three levels of avalanche hazards according to three corresponding levels of certainty that active avalanches occur. The lowest level, potential avalanche hazards, was defined by delineating slopes steep enough to support avalanches at elevations where snowfall was likely to be sufficient to produce a thick snowpack. The intermediate level of avalanche hazard was interpreted as avalanche hazard zones. These zones have direct and indirect indicators of active avalanche activity and were interpreted from LANDSAT imagery. The highest level of known or active avalanche hazards was compiled from existing maps. Some landslides in Colorado were identified and, to a degree, delimited on LANDSAT imagery, but the conditions of their identification were highly variable. Because of local topographic, geologic, structural, and vegetational variations, there was no unique landslide spectral appearance.

33 CFR 154.1125 - Additional response plan requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Additional response plan... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Additional... Prince William Sound, Alaska § 154.1125 Additional response plan requirements. (a) The owner or operator...

Climate Change Indicator for Hazard Identification of Indian North West Coast Marine Environment Using Synthetic Aperture Radar (sar)

NASA Astrophysics Data System (ADS)

Gambheer, Phani Raj

2012-07-01

Stormwater runoff, Petroleum Hydrocarbon plumes are found abundantly near coastal cities, coastal population settlements especially in developing nations as more than half the world's human population. Ever increasing coastal populations and development in coastal areas have led to increased loading of toxic substances, nutrients and pathogens. These hazards cause deleterious effects on the population in many ways directly or indirectly which lead to algal blooms, hypoxia, beach closures, and damage to coastal fisheries. Hence these pollution hazards are important and the coastal administrations and people need to be aware of such a danger lurking very close to them. These hazards due to their small size, dynamic and episodic in nature are difficult to be visualized or to sample using in-situ traditional scientific methods. Natural obstructions like cloud cover and complex coastal circulations can hinder to detect and monitor such occurrences in the selected areas chosen for observations. This study takes recourse to Synthetic Aperture Radar (SAR) imagery because the pollution hazards are easily detectable as surfactants are deposited on the sea surface, along with nutrients and pathogens, smoothing capillary and small gravity waves to produce areas of reduced backscatter compared with surrounding ocean. These black spots can be termed as `Ecologic Indicator' and formed probably due to stronger thermal stratification, a deepening event of thermocline. SAR imagery that delivers useful data better than others regardless of darkness or cloud cover, should be made as an important observational tool for assessment and monitoring marine pollution hazards in the areas close to coastal regions. Till now the effects of climate change, sea level rise and global warming seems to have not affected the coastal populace of India in intrusions of sea water but it takes significance to the human health as the tides dominate these latitudes with bringing these polluted waters. KEY WORDS Coastal, ecologic, estuarine, hazard, indicator, marine, pollution, stressor, tides

The regional geological hazard forecast based on rainfall and WebGIS in Hubei, China

NASA Astrophysics Data System (ADS)

Zheng, Guizhou; Chao, Yi; Xu, Hongwen

2008-10-01

Various disasters have been a serious threat to human and are increasing over time. The reduction and prevention of hazard is the largest problem faced by local governments. The study of disasters has drawn more and more attention mainly due to increasing awareness of the socio-economic impact of disasters. Hubei province, one of the highest economic developing provinces in China, suffered big economic losses from geo-hazards in recent years due to frequent geo-hazard events with the estimated damage of approximately 3000 million RMB. It is therefore important to establish an efficient way to mitigate potential damage and reduce losses of property and life derived from disasters. This paper presents the procedure of setting up a regional geological hazard forecast and information releasing system of Hubei province with the combination of advanced techniques such as World Wide Web (WWW), database online and ASP based on WEBGIS platform (MAPGIS-IMS) and rainfall information. A Web-based interface was developed using a three-tiered architecture based on client-server technology in this system. The study focused on the upload of the rainfall data, the definition of rainfall threshold values, the creation of geological disaster warning map and the forecast of geohazard relating to the rainfall. Its purposes are to contribute to the management of mass individual and regional geological disaster spatial data, help to forecast the conditional probabilities of occurrence of various disasters that might be posed by the rainfall, and release forecasting information of Hubei province timely via the internet throughout all levels of government, the private and nonprofit sectors, and the academic community. This system has worked efficiently and stably in the internet environment which is strongly connected with meteorological observatory. Environment Station of Hubei Province are making increased use of our Web-tool to assist in the decision-making process to analyze geo-hazard in Hubei Province. It would be more helpful to present the geo-hazard information for Hubei administrator.

Weather and environmental hazards at mass gatherings.

PubMed

Soomaroo, Lee; Murray, Virginia

2012-07-31

Introduction Reviews of mass gathering events have traditionally concentrated on crowd variables that affect the level and type of medical care needed. Weather and environmental hazards at mass gathering events have not been fully researched. This review examines these events and aims to provide future suggestions for event organisers, medical resource planners, and emergency services, including local hospital emergency departments. Methods A review was conducted using computerised data bases: MEDLINE, The Cochrane Library, HMIC and EMBASE, with Google used to widen the search beyond peer-reviewed publications, to identify grey literature. All peer-review literature articles found containing information pertaining to lessons identified from mass gathering disasters due to weather or environmental hazards leading to participant death, injury or illness were analysed and reviewed. Disasters occurring due to crowd variables were not included. These articles were read, analysed, abstracted and summarised. Results 20 articles from literature search were found detailing mass gathering disasters relating directly to weather or environmental hazards from 1988 - 2011, with only 17 cases found within peer-review literature. Two events grey literature from 2011 are due to undergo further inquiry while one article reviews an event originally occurring in 1922. Analysis of cases were categorised in to heat and cold-related events, lightning and storms and disease outbreak. Conclusions Mass gathering events have an enormous potential to place a severe strain on the local health care system, Prior health resource and environmental planning for heat & cold-related illness, lightning & storms, and disease outbreak can advance emergency preparedness and response to potential disasters. Soomaroo L, Murray V. Weather and Environmental Hazards at Mass Gatherings. PLoS Currents Disasters. 2012 Jul 31 KEYWORDS: Mass Gatherings, Disasters, Sporting Events, Festivals, Concerts, Storm, Lightning, Cyclone, Hot-weather illness, Cold-weather illness, Disease, Public Health, Syndromic Surveillance Abbreviations: ALS - Advance Life support; BLS - Basic Life support; ED - Emergency Department; EMS - Emergency Medical Services; PPR - Patient Presentation Rate.

RAPID-N: Assessing and mapping the risk of natural-hazard impact at industrial installations

NASA Astrophysics Data System (ADS)

Girgin, Serkan; Krausmann, Elisabeth

2015-04-01

Natural hazard-triggered technological accidents (so-called Natech accidents) at hazardous installations can have major consequences due to the potential for release of hazardous materials, fires and explosions. Effective Natech risk reduction requires the identification of areas where this risk is high. However, recent studies have shown that there are hardly any methodologies and tools that would allow authorities to identify these areas. To work towards closing this gap, the European Commission's Joint Research Centre has developed the rapid Natech risk assessment and mapping framework RAPID-N. The tool, which is implemented in an online web-based environment, is unique in that it contains all functionalities required for running a full Natech risk analysis simulation (natural hazards severity estimation, equipment damage probability and severity calculation, modeling of the consequences of loss of containment scenarios) and for visualizing its results. The output of RAPID-N are risk summary reports and interactive risk maps which can be used for decision making. Currently, the tool focuses on Natech risk due to earthquakes at industrial installations. However, it will be extended to also analyse and map Natech risk due to floods in the near future. RAPID-N is available at http://rapidn.jrc.ec.europa.eu. This presentation will discuss the results of case-study calculations performed for selected flammable and toxic substances to test the capabilities of RAPID-N both for single- and multi-site earthquake Natech risk assessment. For this purpose, an Istanbul earthquake scenario provided by the Turkish government was used. The results of the exercise show that RAPID-N is a valuable decision-support tool that assesses the Natech risk and maps the consequence end-point distances. These end-point distances are currently defined by 7 kPa overpressure for Vapour Cloud Explosions, 2nd degree burns for pool fire (which is equivalent to a heat radiation of 5 kW/m2 for 40s), or the ERPG-2 concentration for atmospheric dispersion of toxic substances).

Weather and Environmental Hazards at Mass Gatherings

PubMed Central

Soomaroo, Lee; Murray, Virginia

2012-01-01

Introduction Reviews of mass gathering events have traditionally concentrated on crowd variables that affect the level and type of medical care needed. Weather and environmental hazards at mass gathering events have not been fully researched. This review examines these events and aims to provide future suggestions for event organisers, medical resource planners, and emergency services, including local hospital emergency departments. Methods A review was conducted using computerised data bases: MEDLINE, The Cochrane Library, HMIC and EMBASE, with Google used to widen the search beyond peer-reviewed publications, to identify grey literature. All peer-review literature articles found containing information pertaining to lessons identified from mass gathering disasters due to weather or environmental hazards leading to participant death, injury or illness were analysed and reviewed. Disasters occurring due to crowd variables were not included. These articles were read, analysed, abstracted and summarised. Results 20 articles from literature search were found detailing mass gathering disasters relating directly to weather or environmental hazards from 1988 – 2011, with only 17 cases found within peer-review literature. Two events grey literature from 2011 are due to undergo further inquiry while one article reviews an event originally occurring in 1922. Analysis of cases were categorised in to heat and cold-related events, lightning and storms and disease outbreak. Conclusions Mass gathering events have an enormous potential to place a severe strain on the local health care system, Prior health resource and environmental planning for heat & cold-related illness, lightning & storms, and disease outbreak can advance emergency preparedness and response to potential disasters. Citation: Soomaroo L, Murray V. Weather and Environmental Hazards at Mass Gatherings. PLoS Currents Disasters. 2012 Jul 31 Keywords: Mass Gatherings, Disasters, Sporting Events, Festivals, Concerts, Storm, Lightning, Cyclone, Hot-weather illness, Cold-weather illness, Disease, Public Health, Syndromic Surveillance Abbreviations: ALS – Advance Life support; BLS – Basic Life support; ED – Emergency Department; EMS – Emergency Medical Services; PPR – Patient Presentation Rate PMID:22953242

Pay Me Now or Pay Me More Later: Start the Development of Active Orbital Debris Removal Now

NASA Astrophysics Data System (ADS)

McKnight, D.

2010-09-01

The objective of this paper is to examine when the aerospace community should proceed to develop and deploy active debris removal solutions. A two-prong approach is taken to examine both (1) operational hazard thresholds and (2) economic triggers. Research in the paper reinforces work by previous investigators that show accurately determining a hazard metric, and an appropriate threshold for that metric that triggers an imperative to implement active debris removal options, is difficult to formulate. A new operational hazard threshold defined by the doubling of the “lethal” debris environment coupled with the threshold that would affect insurance premiums is disclosed for the first time. The doubling of the lethal hazard at 850km and the annual probability of collision in the 650-1000km region may both occur as early as 2035. A simple static (i.e. no temporal dimension) economic threshold is derived that provides the clearest indicator that active debris removal solutions development and deployment should start immediately. This straightforward observation is based on the fact that it will always be at least an order of magnitude less expensive, quicker to execute, and operationally beneficial to remove mass from orbit as one large (several thousand kilograms) object rather than as the result of tens of thousands of fragments that would be produced from a catastrophic collision. Additionally, the ratio of lethal fragments to trackable objects is only ~1,000x yet there is a need for the collection efficiency to be ~10,000x so “sweeping” of lethal fragments is not viable. The practicality of the large object removal is tempered by the observation that one may have to remove ~10-50x derelict objects to prevent a single collision. This fact forces the imperative that removal needs to start now due to the delays that will be necessary not only to perfect/deploy approaches to debris removal and establish supporting policies/regulations but also because of the time it takes for the actions to reap benefits. Additionally, if the growth of the lethal hazard grows faster than anticipated it may be necessary to replace some satellites, execute large object removal, and perform medium debris (i.e. lethal fragments) sweeping operations. The sooner the community starts to remove large derelict objects, the more likely satellite damage will be minimized and the less likely that medium debris sweeping will have to be implemented. While the research is focused on starting debris removal, the ensemble of observations reinforces the need to continue to push for as close to 100% compliance to debris mitigation guidelines as possible. This analysis is unique in its pragmatic application of advanced probability concepts, merging of space hazard assessments with space insurance thresholds, and the use of general risk management concepts on the orbital debris hazard control process. It is hoped that this paper provides an impetus for spacefaring organizations to start to actively pursue development and deployment of debris removal solutions and policies.

[Occupational biological hazard in veterinary medicine: an area for priority interventions].

PubMed

Cediel, Natalia M; Villamil, Luis C

2004-01-01

Veterinary medicine is an activity related to several health hazards; during the last years, studies about the biological hazard associated to animals have been conducted, such hazards represented by the zoonotic diseases and the allergic reactions in exposed workers. Despite its importance, in Colombia the knowledge about the occupational biohazard is scarce, its magnitude is overlooked and in addition a passive attitude from practitioners exists. The few research spaces available and the scattered actions for its prevention, influence directly on the workers' health, on the quality of the services offered and obviously on the quality of life in society. The present article discusses the causes and consequences of biological hazards in veterinary medicine, shows a panorama of the national problem and contributes with alternatives for its solutions.

Occupational Health and the Arts.

PubMed

Hinkamp, David L; McCann, Michael; Babin, Angela

2017-09-01

Work in the visual arts, performing arts, and writing can involve exposures to occupational hazards, including hazardous materials, equipment, and conditions, but few art workplaces have strong occupational health resources. Literature searches were conducted for articles that illustrate these concerns. Medical databases were searched for art-related health articles. Other sources were also reviewed, including, unindexed art-health publications, and popular press articles. Information was located that described some exposed populations, art-related hazards, and resulting disorders. Anecdotal reports were used when more complete data were not available. Health hazards in the arts are significant. Occupational health professionals are familiar with most of these concerns and understand their treatment and prevention. The occupational health approach can reduce the health hazards encountered by at-risk art workers. Additional research would benefit these efforts. Resources for further information are available.

Comparison of the historical record of earthquake hazard with seismic-hazard models for New Zealand and the continental United States

USGS Publications Warehouse

Stirling, M.; Petersen, M.

2006-01-01

We compare the historical record of earthquake hazard experienced at 78 towns and cities (sites) distributed across New Zealand and the continental United States with the hazard estimated from the national probabilistic seismic-hazard (PSH) models for the two countries. The two PSH models are constructed with similar methodologies and data. Our comparisons show a tendency for the PSH models to slightly exceed the historical hazard in New Zealand and westernmost continental United States interplate regions, but show lower hazard than that of the historical record in the continental United States intraplate region. Factors such as non-Poissonian behavior, parameterization of active fault data in the PSH calculations, and uncertainties in estimation of ground-motion levels from historical felt intensity data for the interplate regions may have led to the higher-than-historical levels of hazard at the interplate sites. In contrast, the less-than-historical hazard for the remaining continental United States (intraplate) sites may be largely due to site conditions not having been considered at the intraplate sites, and uncertainties in correlating ground-motion levels to historical felt intensities. The study also highlights the importance of evaluating PSH models at more than one region, because the conclusions reached on the basis of a solely interplate or intraplate study would be very different.

Lidar Sensor Performance in Closed-Loop Flight Testing of the Morpheus Rocket-Propelled Lander to a Lunar-Like Hazard Field

NASA Technical Reports Server (NTRS)

Roback, V. Eric; Pierrottet, Diego F.; Amzajerdian, Farzin; Barnes, Bruce W.; Bulyshev, Alexander E.; Hines, Glenn D.; Petway, Larry B.; Brewster, Paul F.; Kempton, Kevin S.

2015-01-01

For the first time, a suite of three lidar sensors have been used in flight to scan a lunar-like hazard field, identify a safe landing site, and, in concert with an experimental Guidance, Navigation, and Control (GN&C) system, help to guide the Morpheus autonomous, rocket-propelled, free-flying lander to that safe site on the hazard field. The lidar sensors and GN&C system are part of the Autonomous Precision Landing and Hazard Detection and Avoidance Technology (ALHAT) project which has been seeking to develop a system capable of enabling safe, precise crewed or robotic landings in challenging terrain on planetary bodies under any ambient lighting conditions. The 3-D imaging Flash Lidar is a second generation, compact, real-time, aircooled instrument developed from a number of components from industry and NASA and is used as part of the ALHAT Hazard Detection System (HDS) to scan the hazard field and build a 3-D Digital Elevation Map (DEM) in near-real time for identifying safe sites. The Flash Lidar is capable of identifying a 30 cm hazard from a slant range of 1 km with its 8 cm range precision (1-s). The Flash Lidar is also used in Hazard Relative Navigation (HRN) to provide position updates down to a 250m slant range to the ALHAT navigation filter as it guides Morpheus to the safe site. The Navigation Doppler Lidar (NDL) system has been developed within NASA to provide velocity measurements with an accuracy of 0.2 cm/sec and range measurements with an accuracy of 17 cm both from a maximum range of 2,200 m to a minimum range of several meters above the ground. The NDLâ€"TM"s measurements are fed into the ALHAT navigation filter to provide lander guidance to the safe site. The Laser Altimeter (LA), also developed within NASA, provides range measurements with an accuracy of 5 cm from a maximum operational range of 30 km down to 1 m and, being a separate sensor from the Flash Lidar, can provide range along a separate vector. The LA measurements are also fed into the ALHAT navigation filter to provide lander guidance to the safe site. The flight tests served as the culmination of the TRL 6 journey for the ALHAT system and included launch from a pad situated at the NASA-Kennedy Space Center Shuttle Landing Facility (SLF) runway, a lunar-like descent trajectory from an altitude of 250m, and landing on a lunar-like hazard field of rocks, craters, hazardous slopes, and safe sites 400m down-range just off the North end of the runway. The tests both confirmed the expected performance and also revealed several challenges present in the flight-like environment which will feed into future TRL advancement of the sensors. Guidance provided by the ALHAT system was impeded in portions of the trajectory and intermittent near the end of the trajectory due to optical effects arising from air heated by the rocket engine. The Flash Lidar identified hazards as small as 30 cm from the maximum slant range of 450 m which Morpheus could provide; however, it was occasionally susceptible to an increase in range noise due to scintillation arising from air heated by the Morpheus rocket engine which entered its Field-of-View (FOV). The Flash Lidar was also susceptible to pre-triggering, during the HRN phase, on a dust cloud created during launch and transported down-range by the wind. The NDL provided velocity and range measurements to the expected accuracy levels yet it was also susceptible to signal degradation due to air heated by the rocket engine. The LA, operating with a degraded transmitter laser, also showed signal attenuation over a few seconds at a specific phase of the flight due to the heat plume generated by the rocket engine.

Potential hazard due to induced radioactivity secondary to radiotherapy: the report of task group 136 of the American Association of Physicists in Medicine.

PubMed

Thomadsen, Bruce; Nath, Ravinder; Bateman, Fred B; Farr, Jonathan; Glisson, Cal; Islam, Mohammad K; LaFrance, Terry; Moore, Mary E; George Xu, X; Yudelev, Mark

2014-11-01

External-beam radiation therapy mostly uses high-energy photons (x-rays) produced by medical accelerators, but many facilities now use proton beams, and a few use fast-neutron beams. High-energy photons offer several advantages over lower-energy photons in terms of better dose distributions for deep-seated tumors, lower skin dose, less sensitivity to tissue heterogeneities, etc. However, for beams operating at or above 10 MV, some of the materials in the accelerator room and the radiotherapy patient become radioactive due primarily to photonuclear reactions and neutron capture, exposing therapy staff and patients to unwanted radiation dose. Some recent advances in radiotherapy technology require treatments using a higher number of monitor units and monitor-unit rates for the same delivered dose, and compared to the conventional treatment techniques and fractionation schemes, the activation dose to personnel can be substantially higher. Radiotherapy treatments with proton and neutron beams all result in activated materials in the treatment room. In this report, the authors review critically the published literature on radiation exposures from induced radioactivity in radiotherapy. They conclude that the additional exposure to the patient due to induced radioactivity is negligible compared to the overall radiation exposure as a part of the treatment. The additional exposure to the staff due to induced activity from photon beams is small at an estimated level of about 1 to 2 mSv y. This is well below the allowed occupational exposure limits. Therefore, the potential hazard to staff from induced radioactivity in the use of high-energy x-rays is considered to be low, and no specific actions are considered necessary or mandatory. However, in the spirit of the "As Low as Reasonably Achievable (ALARA)" program, some reasonable steps are recommended that can be taken to reduce this small exposure to an even lower level. The dose reduction strategies suggested should be followed only if these actions are considered reasonable and practical in the individual clinics. Therapists working with proton beam and neutron beam units handle treatment devices that do become radioactive, and they should wear extremity monitors and make handling apertures and boluses their last task upon entering the room following treatment. Personnel doses from neutron-beam units can approach regulatory limits depending on the number of patients and beams, and strategies to reduce doses should be followed.

The joint contribution of neighborhood poverty and social integration to mortality risk in the United States.

PubMed

Marcus, Andrea Fleisch; Echeverria, Sandra E; Holland, Bart K; Abraido-Lanza, Ana F; Passannante, Marian R

2016-04-01

A well-established literature has shown that social integration strongly patterns health, including mortality risk. However, the extent to which living in high-poverty neighborhoods and having few social ties jointly pattern survival in the United States has not been examined. We analyzed data from the Third National Health and Nutrition Examination Survey (1988-1994) linked to mortality follow-up through 2006 and census-based neighborhood poverty. We fit Cox proportional hazards models to estimate associations between social integration and neighborhood poverty on all-cause mortality as independent predictors and in joint-effects models using the relative excess risk due to interaction to test for interaction on an additive scale. In the joint-effects model adjusting for age, gender, race/ ethnicity, and individual-level socioeconomic status, exposure to low social integration alone was associated with increased mortality risk (hazard ratio [HR]: 1.42, 95% confidence interval [CI]: 1.28-1.59) while living in an area of high poverty alone did not have a significant effect (HR: 1.10; 95% CI: 0.95-1.28) when compared with being jointly unexposed. Individuals simultaneously living in neighborhoods characterized by high poverty and having low levels of social integration had an increased risk of mortality (HR: 1.63; 95% CI: 1.35-1.96). However, relative excess risk due to interaction results were not statistically significant. Social integration remains an important determinant of mortality risk in the United States independent of neighborhood poverty. Copyright © 2016 Elsevier Inc. All rights reserved.

US Navy incurs ongoing asbestos removal costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barber, J.

1983-07-04

Asbestos insulation removal from the Philadelphia Naval Shipyard and a Coast Guard facility at Fort Totten, Queens could cost the Navy over $400 million by the time all asbestos hazards are identified and removed. Much of the cost is due to equipment shutdown during the process and the handling and disposal of asbestos material. Concern over health hazards from exposure to asbestos and recent lawsuits claiming damage prompted the removal. (DCK)

User perception and interpretation of tornado probabilistic hazard information: Comparison of four graphical designs.

PubMed

Miran, Seyed M; Ling, Chen; James, Joseph J; Gerard, Alan; Rothfusz, Lans

2017-11-01

Effective design for presenting severe weather information is important to reduce devastating consequences of severe weather. The Probabilistic Hazard Information (PHI) system for severe weather is being developed by NOAA National Severe Storms Laboratory (NSSL) to communicate probabilistic hazardous weather information. This study investigates the effects of four PHI graphical designs for tornado threat, namely, "four-color"," red-scale", "grayscale" and "contour", on users' perception, interpretation, and reaction to threat information. PHI is presented on either a map background or a radar background. Analysis showed that the accuracy was significantly higher and response time faster when PHI was displayed on map background as compared to radar background due to better contrast. When displayed on a radar background, "grayscale" design resulted in a higher accuracy of responses. Possibly due to familiarity, participants reported four-color design as their favorite design, which also resulted in the fastest recognition of probability levels on both backgrounds. Our study shows the importance of using intuitive color-coding and sufficient contrast in conveying probabilistic threat information via graphical design. We also found that users follows a rational perceiving-judging-feeling-and acting approach in processing probabilistic hazard information for tornado. Copyright © 2017 Elsevier Ltd. All rights reserved.

Building Capacity for Disaster Risk Reduction

NASA Astrophysics Data System (ADS)

McAdoo, B. G.; Bryner, V.

2013-05-01

Disaster risk is acutely high in many emerging economies due to a combination of geophysical hazards and social and ecological vulnerabilities. The risk associated with natural hazards can be a critical component of a nation's wealth, hence knowledge of these hazards will affect foreign investment in these emergent economies. On the hazard side of the risk profile, geophysicists research the frequency and magnitude of the extant hazards. These geophysicists, both local and foreign, have a responsibility to communicate these risks in the public sphere - whether they are through the mass media, or in personal conversations. Because of this implicit responsibility, it is incumbent upon geophysicists to understand the overall risk, not just the hazards. When it comes to communicating these risks, local scientists are often more effective because they speak the language, understand the social context, and are often connected to various modes of communication unavailable to foreign researchers. Investment in multidisciplinary undergraduate education is critical, as is training of established local scientists in understanding the complexities of risk assessment as well as communicating these risks effectively to broad audiences. Onagawa, Japan. 2011.

[Management of hazardous waste in a hospital].

PubMed

Neveu C, Alejandra; Matus C, Patricia

2007-07-01

An inadequate management of hospital waste, that have toxic, infectious and chemical wastes, is a risk factor for humans and environment. To identify, quantify and assess the risk associated to the management of hospital residues. A cross sectional assessment of the generation of hazardous waste from a hospital, between June and August 2005, was performed. The environmental risk associated to the management of non-radioactive hospital waste was assessed and the main problems related to solid waste were identified. The rate of generation of hazardous non-radioactive waste was 1.35 tons per months or 0.7 kg/bed/day. Twenty five percent of hazardous liquid waste were drained directly to the sewage system. The drug preparation unit of the pharmacy had the higher environmental risk associated to the generation of hazardous waste. The internal transport of hazardous waste had a high risk due to the lack of trip planning. The lack of training of personnel dealing with these waste was another risk factor. Considering that an adequate management of hospital waste should minimize risks for patients, the hospital that was evaluated lacks an integral management system for its waste.

Turbulence Hazard Metric Based on Peak Accelerations for Jetliner Passengers

NASA Technical Reports Server (NTRS)

Stewart, Eric C.

2005-01-01

Calculations are made of the approximate hazard due to peak normal accelerations of an airplane flying through a simulated vertical wind field associated with a convective frontal system. The calculations are based on a hazard metric developed from a systematic application of a generic math model to 1-cosine discrete gusts of various amplitudes and gust lengths. The math model simulates the three degree-of- freedom longitudinal rigid body motion to vertical gusts and includes (1) fuselage flexibility, (2) the lag in the downwash from the wing to the tail, (3) gradual lift effects, (4) a simplified autopilot, and (5) motion of an unrestrained passenger in the rear cabin. Airplane and passenger response contours are calculated for a matrix of gust amplitudes and gust lengths. The airplane response contours are used to develop an approximate hazard metric of peak normal accelerations as a function of gust amplitude and gust length. The hazard metric is then applied to a two-dimensional simulated vertical wind field of a convective frontal system. The variations of the hazard metric with gust length and airplane heading are demonstrated.

Digital geomorphological landslide hazard mapping of the Alpago area, Italy

NASA Astrophysics Data System (ADS)

van Westen, Cees J.; Soeters, Rob; Sijmons, Koert

Large-scale geomorphological maps of mountainous areas are traditionally made using complex symbol-based legends. They can serve as excellent "geomorphological databases", from which an experienced geomorphologist can extract a large amount of information for hazard mapping. However, these maps are not designed to be used in combination with a GIS, due to their complex cartographic structure. In this paper, two methods are presented for digital geomorphological mapping at large scales using GIS and digital cartographic software. The methods are applied to an area with a complex geomorphological setting on the Borsoia catchment, located in the Alpago region, near Belluno in the Italian Alps. The GIS database set-up is presented with an overview of the data layers that have been generated and how they are interrelated. The GIS database was also converted into a paper map, using a digital cartographic package. The resulting largescale geomorphological hazard map is attached. The resulting GIS database and cartographic product can be used to analyse the hazard type and hazard degree for each polygon, and to find the reasons for the hazard classification.

Composition and health hazards of water-based construction paints: results from a survey in the Netherlands.

PubMed Central

van Faassen, A; Borm, P J

1991-01-01

Water-based construction paints may have beneficial effects toward man's occupational and general environment when compared to traditional paints that contain large amounts of organic solvents. The aim of this study was to describe the health hazards of the application of these alternative paints. The composition of these paints was obtained by a questionnaire survey among the main producers and importers in The Netherlands. Physicochemical parameters and toxicity data of the constituents were used to estimate occupational and environmental health hazards. Mucous membrane of skin irritation and sensitization are predicted to be the most frequently occurring health hazards after contact with these paints during professional or do-it-yourself application. Health hazards from environmental pollution may be irritation of the mucous membranes when the indoor environment is painted and fish mortality due to slowly degradable polyacrylate binders. The health hazards can be reduced by replacing some toxic compounds with less toxic ones and by hygienic (ventilation, skincare, no cleaning of application materials under the tap) measures. PMID:1935844

Drought Risk Assessment based on Natural and Social Factors

NASA Astrophysics Data System (ADS)

Huang, Jing; Wang, Huimin; Han, Dawei

2015-04-01

In many parts of the world, drought hazard is becoming more frequent and severe due to climate change and human activities. It is crucial to monitor and assess drought conditions, especially for decision making support in agriculture sector. The vegetation index (VI) decreases, and the land surface temperature (LST) increases when the vegetation is under drought stress. Therefore both of these remotely sensed indices are widely used in drought monitoring and assessment. Temperature-Vegetation Dryness Index (TVDI) is obtained by establishing the feature space of the normalized difference vegetation index (NDVI) and LST, which reflects agriculture dry situation by inverting soil moisture. However, these indices only concern the natural hazard-causing factors. Our society is a complex large-scale system with various natural and social elements. The drought risk is the joint consequence of hazard-causing factors and hazard-affected bodies. For example, as the population increases, the exposure of the hazard-affected bodies also tends to increase. The high GDP enhances the response ability of government, and the irrigation and water conservancy reduces the vulnerability. Such characteristics of hazard-affected bodies should be coupled with natural factors. In this study, the 16-day moderate-resolution imaging spectroradiometer (MODIS) NDVI and LST data are combined to establish NDVI-Ts space according to different land use types in Yunnan Province, China. And then, TVDIs are calculated through dry and wet edges modeled as a linear fit to data for each land cover type. Next, the efforts are turned to establish an integrated drought assessment index of social factors and TVDI through ascertaining attribute weight based on rough sets theory. Thus, the new CDI (comprehensive drought index) recorded during spring of 2010 and the spatial variations in drought are analyzed and compared with TVDI dataset. Moreover, actual drought risk situation in the study area is given to verify the effectiveness of the CDI. In addition, GIS is applied to provide geographically referenced information, i.e. information involving location, elevation, land use, water resources distance and so on, which are essential inputs for spatial analysis in drought risk assessment. On the whole, this study has proposed a new idea on drought risk assessment integrating natural factors with social factors, as well as providing a real-time drought monitoring method in a social context.

Earthquake and Tsunami planning, outreach and awareness in Humboldt County, California

NASA Astrophysics Data System (ADS)

Ozaki, V.; Nicolini, T.; Larkin, D.; Dengler, L.

2008-12-01

Humboldt County has the longest coastline in California and is one of the most seismically active areas of the state. It is at risk from earthquakes located on and offshore and from tsunamis generated locally from faults associated with the Cascadia subduction zone (CSZ), other regional fault systems, and from distant sources elsewhere in the Pacific. In 1995 the California Division of Mines and Geology published the first earthquake scenario to include both strong ground shaking effects and a tsunami. As a result of the scenario, the Redwood Coast Tsunami Work Group (RCTWG), an organization of representatives from government agencies, tribes, service groups, academia and the private sector from the three northern coastal California counties, was formed in 1996 to coordinate and promote earthquake and tsunami hazard awareness and mitigation. The RCTWG and its member agencies have sponsored a variety of projects including education/outreach products and programs, tsunami hazard mapping, signage and siren planning, and has sponsored an Earthquake - Tsunami Education Room at the Humboldt County fair for the past eleven years. Three editions of Living on Shaky Ground an earthquake-tsunami preparedness magazine for California's North Coast, have been published since 1993 and a fourth is due to be published in fall 2008. In 2007, Humboldt County was the first region in the country to participate in a tsunami training exercise at FEMA's Emergency Management Institute in Emmitsburg, MD and the first area in California to conduct a full-scale tsunami evacuation drill. The County has conducted numerous multi-agency, multi-discipline coordinated exercises using county-wide tsunami response plan. Two Humboldt County communities were recognized as TsunamiReady by the National Weather Service in 2007. Over 300 tsunami hazard zone signs have been posted in Humboldt County since March 2008. Six assessment surveys from 1993 to 2006 have tracked preparedness actions and personal awareness of earthquake and tsunami hazards in the county and additional surveys have tracked public awareness and tourist concerns about tsunami hazard signs. Over the thirteen year period covered by the surveys, the percent with houses secured to foundations has increased from 58 to 80 percent, respondents aware of a local tsunami hazard increased from 51 to 73 percent and knowing what the Cascadia subduction zone is from 16 to 42 percent.

Perceptions of adult trauma patients on the acceptability of text messaging as an aid to reduce harmful drinking behaviours

PubMed Central

2014-01-01

Background Brief interventions (BIs) have been shown to be effective in modifying hazardous drinking behaviours in a range of settings. However, they are underutilised in hospitals due to resource constraints. We explored the perspectives of admitted trauma patients about the appeal, acceptability and content of a Brief Intervention (BI) delivered via text messages. Methods Thirty mobile phone users (≥16 years old) admitted to Auckland City Hospital as a result of injury were recruited (December 2010 – January 2011). Participants were interviewed face-to-face during their hospital stay using a semi-structured interview guide that explored topics including perceptions of the proposed intervention to reduce hazardous drinking and related harm, and perceived acceptability of an m-health program. Where issues relating to content of messages were raised by participants these were also captured. In addition, a brief survey captured information on demographic information, mobile phone usage and type of phone, along with the frequency of alcohol use. Results 22 of the 30 participants were male, and almost half were aged 20 to 39 years. The majority of participants identified as New Zealand Europeans, six as Māori (New Zealand's indigenous population) and of the remainder two each identified as Pacific and of Asian ethnicity. Most (28/30) participants used a mobile phone daily. 18 participants were deemed to be drinking in a non-hazardous manner, seven were hazardous drinkers, and three were non-drinkers. Most participants (21/30) indicated that text messages could be effective in reducing hazardous drinking and related harms, with more than half (17/30) signalling they would sign-up. Factors identified that would increase receptiveness included: awareness that the intervention was evidence-based; participants readiness-to-change; informative messages that include the consequences of drinking and practical advice; non-judgemental messages; and ease-of-use. Areas of potential concern included: confidentiality and frequency of messages. The cultural relevance of the messages for Māori was highlighted as important. Conclusions This study indicates that trauma patients recognize potential benefits of mobile-health interventions designed to reduce hazardous drinking. The feedback provided will inform the development of an intervention to be evaluated in a randomised controlled trial. PMID:24387293

ATV Engineering Support Team Safety Console Preparation for the Johannes Kepler Mission

NASA Astrophysics Data System (ADS)

Chase, R.; Oliefka, L.

2010-09-01

This paper describes the improvements to be implemented in the Safety console position of the Engineering Support Team(EST) at the Automated Transfer Vehicle(ATV) Control Centre(ATV-CC) for the upcoming ATV Johannes Kepler mission. The ATV missions to the International Space Station are monitored and controlled from the ATV-CC in Toulouse, France. The commanding of ATV is performed by the Vehicle Engineering Team(VET) in the main control room under authority of the Flight Director. The EST performs a monitoring function in a room beside the main control room. One of the EST positions is the Safety console, which is staffed by safety engineers from ESA and the industrial prime contractor, Astrium. The function of the Safety console is to check whether the hazard controls are available throughout the mission as required by the Hazard Reports approved by the ISS Safety Review Panel. Safety console preparation activities were limited prior to the first ATV mission due to schedule constraints, and the safety engineers involved have been working to improve the readiness for ATV 2. The following steps have been taken or are in process, and will be described in this paper: • review of the implementation of Operations Control Agreement Documents(OCADs) that record the way operational hazard controls are performed to meet the needs of the Hazard Reports(typically in Flight Rules and Crew Procedures), • crosscheck of operational control needs and implementations with respect to ATV's first flight observations and post flight evaluations, with a view to identifying additional, obsolete or revised operational hazard controls, • participation in the Flight Rule review and update process carried out between missions, • participation in the assessment of anomalies observed during the first ATV mission, to ensure that any impacts are addressed in the ATV 2 safety documentation, • preparation of a Safety console handbook to provide lists of important safety aspects to be monitored at various stages of the mission, including links to relevant Hazard Reports, Flight Rules, and supporting documentation, • participation to training courses conducted in the frame of the ATV Training Academy(ATAC), and provision of courses related to safety for the other members of the VET and EST, • participation to simulations conducted at ATV-CC, including off-nominal cases. The result of these activities will be an improved level of readiness for the ATV 2 mission.

DOE Office of Scientific and Technical Information (OSTI.GOV)

F.V. Perry; A. Cogbill; R. Kelley

The U.S. Department of Energy (DOE) considers volcanism to be a potentially disruptive class of events that could affect the safety of the proposed high-level waste repository at Yucca Mountain. Volcanic hazard assessment in monogenetic volcanic fields depends on an adequate understanding of the temporal and spatial pattern of past eruptions. At Yucca Mountain, the hazard is due to an 11 Ma-history of basaltic volcanism with the latest eruptions occurring in three Pleistocene episodes to the west and south of Yucca Mountain. An expert elicitation convened in 1995-1996 by the DOE estimated the mean hazard of volcanic disruption of themore » repository as slightly greater than 10{sup -8} dike intersections per year with an uncertainty of about two orders of magnitude. Several boreholes in the region have encountered buried basalt in alluvial-filled basins; the youngest of these basalts is dated at 3.8 Ma. The possibility of additional buried basalt centers is indicated by a previous regional aeromagnetic survey conducted by the USGS that detected approximately 20 magnetic anomalies that could represent buried basalt volcanoes. Sensitivity studies indicate that the postulated presence of buried post-Miocene volcanoes to the east of Yucca Mountain could increase the hazard by an order of magnitude, and potentially significantly impact the results of the earlier expert elicitation. Our interpretation of the aeromagnetic data indicates that post-Miocene basalts are not present east of Yucca Mountain, but that magnetic anomalies instead represent faulted and buried Miocene basalt that correlates with nearby surface exposures. This interpretation is being tested by drilling. The possibility of uncharacterized buried volcanoes that could significantly change hazard estimates led DOE to support an update of the expert elicitation in 2004-2006. In support of the expert elicitation data needs, the DOE is sponsoring (1) a new higher-resolution, helicopter-borne aeromagnetic survey, completed in mid-2004, and (2) drilling of selected anomalies based on the aeromagnetic survey results to better characterize the number, location and age of buried volcanoes, which began in mid-2005. The new aeromagnetic survey detected the presence of 33 anomalies interpreted as possible buried volcanoes or faulted tuff bedrock. A program to drill ten of the anomalies has begun, with the selection of drill holes prioritized based on their potential impact on the hazard assessment.« less

Comparative hazard analysis and toxicological modeling of diverse nanomaterials using the embryonic zebrafish (EZ) metric of toxicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harper, Bryan; Thomas, Dennis G.; Chikkagoudar, Satish

The integration of rapid assays, large data sets, informatics and modeling can overcome current barriers in understanding nanomaterial structure-toxicity relationships by providing a weight-of-the-evidence mechanism to generate hazard rankings for nanomaterials. Here we present the use of a rapid, low-cost assay to perform screening-level toxicity evaluations of nanomaterials in vivo. Calculated EZ Metric scores, a combined measure of morbidity and mortality, were established at realistic exposure levels and used to develop a predictive model of nanomaterial toxicity. Hazard ranking and clustering analysis of 68 diverse nanomaterials revealed distinct patterns of toxicity related to both core composition and outermost surface chemistrymore » of nanomaterials. The resulting clusters guided the development of a predictive model of gold nanoparticle toxicity to embryonic zebrafish. In addition, our findings suggest that risk assessments based on the size and core composition of nanomaterials alone may be wholly inappropriate, especially when considering complex engineered nanomaterials. These findings reveal the need to expeditiously increase the availability of quantitative measures of nanomaterial hazard and broaden the sharing of that data and knowledge to support predictive modeling. In addition, research should continue to focus on methodologies for developing predictive models of nanomaterial hazard based on sub-lethal responses to low dose exposures.« less

Comparative hazard analysis and toxicological modeling of diverse nanomaterials using the embryonic zebrafish (EZ) metric of toxicity

DOE PAGES

Harper, Bryan; Thomas, Dennis G.; Chikkagoudar, Satish; ...

2015-06-04

The integration of rapid assays, large data sets, informatics and modeling can overcome current barriers in understanding nanomaterial structure-toxicity relationships by providing a weight-of-the-evidence mechanism to generate hazard rankings for nanomaterials. Here we present the use of a rapid, low-cost assay to perform screening-level toxicity evaluations of nanomaterials in vivo. Calculated EZ Metric scores, a combined measure of morbidity and mortality, were established at realistic exposure levels and used to develop a predictive model of nanomaterial toxicity. Hazard ranking and clustering analysis of 68 diverse nanomaterials revealed distinct patterns of toxicity related to both core composition and outermost surface chemistrymore » of nanomaterials. The resulting clusters guided the development of a predictive model of gold nanoparticle toxicity to embryonic zebrafish. In addition, our findings suggest that risk assessments based on the size and core composition of nanomaterials alone may be wholly inappropriate, especially when considering complex engineered nanomaterials. These findings reveal the need to expeditiously increase the availability of quantitative measures of nanomaterial hazard and broaden the sharing of that data and knowledge to support predictive modeling. In addition, research should continue to focus on methodologies for developing predictive models of nanomaterial hazard based on sub-lethal responses to low dose exposures.« less

Simulation-Based Probabilistic Tsunami Hazard Analysis: Empirical and Robust Hazard Predictions

NASA Astrophysics Data System (ADS)

De Risi, Raffaele; Goda, Katsuichiro

2017-08-01

Probabilistic tsunami hazard analysis (PTHA) is the prerequisite for rigorous risk assessment and thus for decision-making regarding risk mitigation strategies. This paper proposes a new simulation-based methodology for tsunami hazard assessment for a specific site of an engineering project along the coast, or, more broadly, for a wider tsunami-prone region. The methodology incorporates numerous uncertain parameters that are related to geophysical processes by adopting new scaling relationships for tsunamigenic seismic regions. Through the proposed methodology it is possible to obtain either a tsunami hazard curve for a single location, that is the representation of a tsunami intensity measure (such as inundation depth) versus its mean annual rate of occurrence, or tsunami hazard maps, representing the expected tsunami intensity measures within a geographical area, for a specific probability of occurrence in a given time window. In addition to the conventional tsunami hazard curve that is based on an empirical statistical representation of the simulation-based PTHA results, this study presents a robust tsunami hazard curve, which is based on a Bayesian fitting methodology. The robust approach allows a significant reduction of the number of simulations and, therefore, a reduction of the computational effort. Both methods produce a central estimate of the hazard as well as a confidence interval, facilitating the rigorous quantification of the hazard uncertainties.

[Hygienic evaluation of new welding processes and welding materials].

PubMed

Gorban', L N

1990-01-01

The possibility of contaminating the breathing air zone with hazardous substances in manual and semi-automated welding increases with the intensity of their formation in the arc zone. This necessitates more comprehensive data on both the specific excreta and the formation intensity of the most hazardous substances, such as hard and gaseous compounds of welding aerosols, with due account of the welding regimen used and electrode diameter, wires, etc. When calculating the effectiveness of both local and general ventilation systems in welding shops, a possibility of a specific one-way hazardous action of some chemical substances (e.g. chromium, fluorine, etc.) should be taken into account.

Institutional Oversight of Occupational Health and Safety for Research Programs Involving Biohazards

PubMed Central

Dyson, Melissa C; Carpenter, Calvin B; Colby, Lesley A

2017-01-01

Research with hazardous biologic materials (biohazards) is essential to the progress of medicine and science. The field of microbiology has rapidly advanced over the years, partially due to the development of new scientific methods such as recombinant DNA technology, synthetic biology, viral vectors, and the use of genetically modified animals. This research poses a potential risk to personnel as well as the public and the environment. Institutions must have appropriate oversight and take appropriate steps to mitigate the risks of working with these biologic hazards. This article will review responsibilities for institutional oversight of occupational health and safety for research involving biologic hazards. PMID:28662748

Institutional Oversight of Occupational Health and Safety for Research Programs Involving Biohazards.

PubMed

Dyson, Melissa C; Carpenter, Calvin B; Colby, Lesley A

2017-06-01

Research with hazardous biologic materials (biohazards) is essential to the progress of medicine and science. The field of microbiology has rapidly advanced over the years, partially due to the development of new scientific methods such as recombinant DNA technology, synthetic biology, viral vectors, and the use of genetically modified animals. This research poses a potential risk to personnel as well as the public and the environment. Institutions must have appropriate oversight and take appropriate steps to mitigate the risks of working with these biologic hazards. This article will review responsibilities for institutional oversight of occupational health and safety for research involving biologic hazards.

New techniques on oil spill modelling applied in the Eastern Mediterranean sea

NASA Astrophysics Data System (ADS)

Zodiatis, George; Kokinou, Eleni; Alves, Tiago; Lardner, Robin

2016-04-01

Small or large oil spills resulting from accidents on oil and gas platforms or due to the maritime traffic comprise a major environmental threat for all marine and coastal systems, and they are responsible for huge economic losses concerning the human infrastructures and the tourism. This work aims at presenting the integration of oil-spill model, bathymetric, meteorological, oceanographic, geomorphological and geological data to assess the impact of oil spills in maritime regions such as bays, as well as in the open sea, carried out in the Eastern Mediterranean Sea within the frame of NEREIDs, MEDESS-4MS and RAOP-Med EU projects. The MEDSLIK oil spill predictions are successfully combined with bathymetric analyses, the shoreline susceptibility and hazard mapping to predict the oil slick trajectories and the extend of the coastal areas affected. Based on MEDSLIK results, oil spill spreading and dispersion scenarios are produced both for non-mitigated and mitigated oil spills. MEDSLIK model considers three response combating methods of floating oil spills: a) mechanical recovery using skimmers or similar mechanisms; b) destruction by fire, c) use of dispersants or other bio-chemical means and deployment of booms. Shoreline susceptibility map can be compiled for the study areas based on the Environmental Susceptibility Index. The ESI classification considers a range of values between 1 and 9, with level 1 (ESI 1) representing areas of low susceptibility, impermeable to oil spilt during accidents, such as linear shorelines with rocky cliffs. In contrast, ESI 9 shores are highly vulnerable, and often coincide with natural reserves and special protected areas. Additionally, hazard maps of the maritime and coastal areas, possibly exposed to the danger on an oil spill, evaluate and categorize the hazard in levels from low to very high. This is important because a) Prior to an oil spill accident, hazard and shoreline susceptibility maps are made available to design preparedness and prevention plans in an effective way, b) After an oil spill accident, oil spill predictions can be combined with hazard maps to provide information on the oil spill dispersion and their impacts. This way, prevention plans can be directly modified at any time after the accident.

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

41 CFR 101-42.202 - Identification of hazardous materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

...'s Federal Supply Service (4FQ) maintains an automated data base, accessible via modem and computer... on the terminal screen, the system allows for the addition of the MSDS to the user's local data base... personnel who handle, store, ship, use or dispose of hazardous materials. Each record in the data base is...

Hazardous Waste Processing in the Chemical Engineering Curriculum.

ERIC Educational Resources Information Center

Dorland, Dianne; Baria, Dorab N.

1995-01-01

Describes a sequence of two courses included in the chemical engineering program at the University of Minnesota, Duluth that deal with the processing of hazardous wastes. Covers course content and structure, and discusses developments in pollution prevention and waste management that led to the addition of these courses to the curriculum.…

40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking... appropriate for the waste or category of waste; will improve management practices for the waste or category of... waste or category of waste, will improve management practices for the waste or category of waste, and...

40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking... appropriate for the waste or category of waste; will improve management practices for the waste or category of... waste or category of waste, will improve management practices for the waste or category of waste, and...

40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking... appropriate for the waste or category of waste; will improve management practices for the waste or category of... waste or category of waste, will improve management practices for the waste or category of waste, and...

49 CFR 172.505 - Placarding for subsidiary hazards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... material subject to the “Poison Inhalation Hazard” shipping description of § 172.203(m) must be placarded with a POISON INHALATION HAZARD or POISON GAS placard, as appropriate, on each side and each end, in addition to any other placard required for that material in § 172.504. Duplication of the POISON INHALATION...

49 CFR 172.505 - Placarding for subsidiary hazards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... material subject to the “Poison Inhalation Hazard” shipping description of § 172.203(m) must be placarded with a POISON INHALATION HAZARD or POISON GAS placard, as appropriate, on each side and each end, in addition to any other placard required for that material in § 172.504. Duplication of the POISON INHALATION...

49 CFR 172.505 - Placarding for subsidiary hazards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... material subject to the “Poison Inhalation Hazard” shipping description of § 172.203(m) must be placarded with a POISON INHALATION HAZARD or POISON GAS placard, as appropriate, on each side and each end, in addition to any other placard required for that material in § 172.504. Duplication of the POISON INHALATION...

49 CFR 172.505 - Placarding for subsidiary hazards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... material subject to the “Poison Inhalation Hazard” shipping description of § 172.203(m) must be placarded with a POISON INHALATION HAZARD or POISON GAS placard, as appropriate, on each side and each end, in addition to any other placard required for that material in § 172.504. Duplication of the POISON INHALATION...

49 CFR 172.505 - Placarding for subsidiary hazards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... material subject to the “Poison Inhalation Hazard” shipping description of § 172.203(m) must be placarded with a POISON INHALATION HAZARD or POISON GAS placard, as appropriate, on each side and each end, in addition to any other placard required for that material in § 172.504. Duplication of the POISON INHALATION...

40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking... appropriate for the waste or category of waste; will improve management practices for the waste or category of... waste or category of waste, will improve management practices for the waste or category of waste, and...

Cables and fire hazards

NASA Technical Reports Server (NTRS)

Zanelli, C.; Philbrick, S.; Beretta, G.

1986-01-01

Besides describing the experiments conducted to develop a nonflammable cable, this article discusses several considerations regarding other hazards which might result from cable fires, particularly the toxicity and opacity of the fumes emitted by the burning cable. In addition, this article examines the effects of using the Oxygen Index as a gauge of quality control during manufacture.

Advancing the citizen scientist's contributions to documenting and understanding natural hazards: a proof of concept for linking crowdsourced and remotely sensed data on landslide hazards in El Salvador

NASA Astrophysics Data System (ADS)

Anderson, E. R.; Griffin, R.; Markert, K. N.

2017-12-01

Scientists, practitioners, policymakers, and citizen groups, share a role in ensuring "that all sectors have access to, understand and can use scientific information for better informed decision-making" (Sendai Framework 2015-2030). When it comes to understanding hazards and exposure, inventories on disaster events are often limited. Thus, there are many opportunities for citizen scientists to engage in improving the collective understanding—and ultimately reduction—of disaster risk. Landslides are very difficult to forecast on spatial and temporal scales meaningful for early warning and evacuation. Heuristic hazard mapping methods are very common in regional hazard zonation and rely on expert knowledge of previous events and local conditions, but they often lack a temporal component. As new data analysis packages are becoming more open and accessible, probabilistic approaches that consider high resolution spatial and temporal dimensions are becoming more common, but this is only possible when rich inventories of landslide events exist. The work presented offers a proof of concept on incorporating crowd-sourced data to improve landslide hazard model performance. Starting with a national inventory of 90 catalogued landslides in El Salvador for a study period of 1998 to 2011, we simulate the addition of over 600 additional crowd-sourced landslide events that would have been identified through human interpretation of high resolution imagery in the Google Earth time slider feature. There is a noticeable improvement in performance statistics between static heuristic hazard models and probabilistic models that incorporate the events identified by the "crowd." Such a dynamic incorporation of crowd-sourced data on hazard events is not so far-fetched. Given the engagement of "local observers" in El Salvador who augment in situ hydro-meteorological measurements, the growing access to Earth observation data to the lay person, and immense interest behind connecting citizen scientists to remote sensing data through hackathons such as the NASA Space Apps Challenges, we envision a much more dynamic, collective understanding of landslide hazards. Here we present a better scenario of what we could have known had data from the crowd been incorporated into probabilistic hazard models on a regular basis.

Physical health-related quality of life predicts disability pension due to musculoskeletal disorders: seven years follow-up of the Hordaland Health Study Cohort

PubMed Central

2014-01-01

Background Musculoskeletal diseases are characterized by a high degree of comorbidity with common mental disorders and are a major cause of health-related exclusion from working life. Using a prospective design we aimed to examine the relative importance of physical and mental health-related quality of life as predictors of disability pension due to musculoskeletal diseases. Methods A subsample (N = 18581) born 1953–1957, participated in the The Hordaland Health Study (HUSK) during 1997–1999, and was followed through December 31st 2004. Baseline measures of health-related quality of life were estimated using the Physical (PCS) and Mental Component Summary (MCS) of the Short Form-12 (SF-12). Further information on education, occupation, smoking, physical activity, number of musculoskeletal pain sites and BMI were provided by questionnaires and health examination. The association between self-perceived physical and mental health and subsequent disability pension, obtained from the national database of health and social benefits was estimated using Cox regression analyses. Results Participants reporting poor physical health (quartile 1) had a marked increased risk for disability pension due to musculoskeletal diseases (age and gender-adjusted hazard ratio = 22.1, 95% CI = 12.5–39.0) compared with those reporting good/somewhat good physical health (quartiles 4 and 3 combined). Adjustment for socioeconomic status and lifestyle factors slightly attenuated the association (hazard ratio = 16.7), and adding number of reported pain sites weakened the association even more (hazard ratio = 7.1, 95% CI = 3.8–12.8). Also, participants reporting poor mental health had a higher risk for disability pension due to musculoskeletal diseases (age and gender adjusted hazard ratio = 1.8, 95% CI = 1.3–2.6); however, in the final model the risk was not statistically significant. Conclusions The physical component in health-related quality of life (SF-12) was a strong predictor of disability pension due to musculoskeletal diseases, whereas the mental component played a less prominent role. PMID:24528674

Physical health-related quality of life predicts disability pension due to musculoskeletal disorders: seven years follow-up of the Hordaland Health Study Cohort.

PubMed

Haukenes, Inger; Farbu, Erlend H; Riise, Trond; Tell, Grethe S

2014-02-14

Musculoskeletal diseases are characterized by a high degree of comorbidity with common mental disorders and are a major cause of health-related exclusion from working life. Using a prospective design we aimed to examine the relative importance of physical and mental health-related quality of life as predictors of disability pension due to musculoskeletal diseases. A subsample (N = 18,581) born 1953-1957, participated in the The Hordaland Health Study (HUSK) during 1997-1999, and was followed through December 31st 2004. Baseline measures of health-related quality of life were estimated using the Physical (PCS) and Mental Component Summary (MCS) of the Short Form-12 (SF-12). Further information on education, occupation, smoking, physical activity, number of musculoskeletal pain sites and BMI were provided by questionnaires and health examination. The association between self-perceived physical and mental health and subsequent disability pension, obtained from the national database of health and social benefits was estimated using Cox regression analyses. Participants reporting poor physical health (quartile 1) had a marked increased risk for disability pension due to musculoskeletal diseases (age and gender-adjusted hazard ratio = 22.1, 95% CI = 12.5-39.0) compared with those reporting good/somewhat good physical health (quartiles 4 and 3 combined). Adjustment for socioeconomic status and lifestyle factors slightly attenuated the association (hazard ratio = 16.7), and adding number of reported pain sites weakened the association even more (hazard ratio = 7.1, 95% CI = 3.8-12.8). Also, participants reporting poor mental health had a higher risk for disability pension due to musculoskeletal diseases (age and gender adjusted hazard ratio = 1.8, 95% CI = 1.3-2.6); however, in the final model the risk was not statistically significant. The physical component in health-related quality of life (SF-12) was a strong predictor of disability pension due to musculoskeletal diseases, whereas the mental component played a less prominent role.

Potential environmental and human health impacts of rechargeable lithium batteries in electronic waste.

PubMed

Kang, Daniel Hsing Po; Chen, Mengjun; Ogunseitan, Oladele A

2013-05-21

Rechargeable lithium-ion (Li-ion) and lithium-polymer (Li-poly) batteries have recently become dominant in consumer electronic products because of advantages associated with energy density and product longevity. However, the small size of these batteries, the high rate of disposal of consumer products in which they are used, and the lack of uniform regulatory policy on their disposal means that lithium batteries may contribute substantially to environmental pollution and adverse human health impacts due to potentially toxic materials. In this research, we used standardized leaching tests, life-cycle impact assessment (LCIA), and hazard assessment models to evaluate hazardous waste classification, resource depletion potential, and toxicity potentials of lithium batteries used in cellphones. Our results demonstrate that according to U.S. federal regulations, defunct Li-ion batteries are classified hazardous due to their lead (Pb) content (average 6.29 mg/L; σ = 11.1; limit 5). However, according to California regulations, all lithium batteries tested are classified hazardous due to excessive levels of cobalt (average 163,544 mg/kg; σ = 62,897; limit 8000), copper (average 98,694 mg/kg; σ = 28,734; limit 2500), and nickel (average 9525 mg/kg; σ = 11,438; limit 2000). In some of the Li-ion batteries, the leached concentrations of chromium, lead, and thallium exceeded the California regulation limits. The environmental impact associated with resource depletion and human toxicity is mainly associated with cobalt, copper, nickel, thallium, and silver, whereas the ecotoxicity potential is primarily associated with cobalt, copper, nickel, thallium, and silver. However, the relative contribution of aluminum and lithium to human toxicity and ecotoxicity could not be estimated due to insufficient toxicity data in the models. These findings support the need for stronger government policy at the local, national, and international levels to encourage recovery, recycling, and reuse of lithium battery materials.

Potential Environmental and Human Health Impacts of Rechargeable Lithium Batteries in Electronic Waste

PubMed Central

Kang, Daniel Hsing Po; Chen, Mengjun; Ogunseitan, Oladele A.

2013-01-01

Rechargeable lithium-ion (Li-ion) and lithium-polymer (Li-poly) batteries have recently become dominant in consumer electronic products because of advantages associated with energy density and product longevity. However, the small size of these batteries, the high rate of disposal of consumer products in which they are used, and the lack of uniform regulatory policy on their disposal means that lithium batteries may contribute substantially to environmental pollution and adverse human health impacts due to potentially toxic materials. In this research, we used standardized leaching tests, life-cycle impact assessment (LCIA), and hazard assessment models to evaluate hazardous waste classification, resource depletion potential, and toxicity potentials of lithium batteries used in cellphones. Our results demonstrate that according to U.S. federal regulations, defunct Li-ion batteries are classified hazardous due to their lead (Pb) content (average 6.29 mg/L; σ = 11.1; limit 5). However, according to California regulations, all lithium batteries tested are classified hazardous due to excessive levels of cobalt (average 163 544 mg/kg; σ = 62 897; limit 8000), copper (average 98 694 mg/kg; σ = 28 734; limit 2500), and nickel (average 9525 mg/kg; σ = 11 438; limit 2000). In some of the Li-ion batteries, the leached concentrations of chromium, lead, and thallium exceeded the California regulation limits. The environmental impact associated with resource depletion and human toxicity is mainly associated with cobalt, copper, nickel, thallium, and silver, whereas the ecotoxicity potential is primarily associated with cobalt, copper, nickel, thallium, and silver. However, the relative contribution of aluminum and lithium to human toxicity and ecotoxicity could not be estimated due to insufficient toxicity data in the models. These findings support the need for stronger government policy at the local, national, and international levels to encourage recovery, recycling, and reuse of lithium battery materials. PMID:23638841

Influence of land-use dynamics on natural hazard risk

NASA Astrophysics Data System (ADS)

Piazza, Giacomo; Thaler, Thomas; Fuchs, Sven

2016-04-01

In the recent past the magnitude and frequency of natural hazard events has increased notably worldwide, along with global GDP. A higher number of elements are exposed to natural events, therefore the risk is higher. Both estimated losses and understanding about natural hazards have increased during the past decades, which is contradictory as we may logically think. Risk is increasing, due to climate change and societal change: more severe hazards are happening due to changing climatic patterns and conditions, while society is concentrating assets and people in punctual places leading to a higher exposure. Increasing surface of settled area and the concentration of highly valuable assets (e.g. technology) in exposed areas lead to higher probability of losses. Human use of land resources, namely landuse, is the product of human needs and biophysical characteristics of the land. Landuse involves arrangements, activities and inputs people undertake in a certain land cover type to produce, change or maintain it. These changes are due to many reasons, or driving factors: socio-economical, environmental, accessibility to land, land-tenure, etc. The change of those factors may cause many effects and impacts, at various levels and at different time spans. The relation between driving factors and impacts is not straight. It is although a complex interrelation that turns around two central questions: (1) what drives landuse changes and why and (2) what are the impacts on the environment and on the human society of these changes, regarding to natural hazards. The aim of this paper is to analyse the spatio-temporal environmental changes referring to exposure as well as to test the possibilities and limitations of the land use change model Dyna-CLUEs in a mountain region taking parts of the Republic of Austria as an example, and simulating the future landuse dynamics until 2030. We selected an area composed by eighteen municipalities in the Ill-Walgau in the Austrian federal state of Vorarlberg. The choice is due to the interesting spatial arrangement of the area which alternate a well-developed infrastructure network, a high percentage in forest cover, industrial areas and two relatively big cities, Feldkirch and Bludenz. As we observed, the past two decades did not face substantial landuse change - in comparison with the decades from the 1950s to the 1990s - hence we may also expect that the next three decades will follow the same trend of the recent past. Four scenarios were built in order to end up with four future landuse maps. We cross-checked these maps with hazard zoning by the Austrian Torrent and Avalanche Control Service (WLV) and the zonation by the Austrian Hydraulic Engineering Administration (BWV). Excluding a significant change in the next 30 years in the hazard propagation (intensity, frequency, etc.) - hence excluding climate change effects - we observed how the risk changes with changing landuse patterns throughout the years. The study aims to show the importance of spatial planning and restriction policies in mitigation of natural hazards. Still, the spatial planning is or should be one fundamental pillar of risk management, although is not yet a homogenous and standardized element in risk management in Austria.

Aviation-attributable ozone as a driver for changes in mortality related to air quality and skin cancer

NASA Astrophysics Data System (ADS)

Eastham, Sebastian D.; Barrett, Steven R. H.

2016-11-01

Aviation is a significant source of tropospheric ozone, which is a critical UV blocking agent, an indirect precursor to the formation of particulate matter, and a respiratory health hazard. To date, investigations of human health impacts related to aviation emissions have focused on particulate matter, and no global estimate yet exists of the combined health impact of aviation due to ozone, particulate matter and UV exposure changes. We use a coupled tropospheric-stratospheric chemical-transport model with a global aviation emissions inventory to estimate the total impact of aviation on all three risk factors. We find that surface ozone due to aviation emissions is maximized during hemispheric winter due to the greater wintertime chemical lifetime of ozone, but that a smaller enhancement of 0.5 ppbv occurs during summertime. This summertime increase results in an estimated 6,800 premature mortalities per year due to ozone exposure, over three times greater than previous estimates. During the winter maximum, interaction with high background NOx concentrations results in enhanced production of nitrate aerosol and increased annual average exposure to particulate matter. This ozone perturbation is shown to be the driving mechanism behind an additional 9,200 premature mortalities due to exposure to particulate matter. However, the increase in tropospheric ozone is also found to result in 400 fewer mortalities due to melanoma skin cancer in 2006. This is the first estimate of global melanoma mortality due to aviation, and the first estimate of skin cancer mortality impacts due to aviation using a global chemical transport model.

DEVELOPING A METHOD TO IDENTIFY HORIZONTAL CURVE SEGMENTS WITH HIGH CRASH OCCURRENCES USING THE HAF ALGORITHM

DOT National Transportation Integrated Search

2018-04-01

Crashes occur every day on Utahs highways. Curves can be particularly dangerous as they require driver focus due to potentially unseen hazards. Often, crashes occur on curves due to poor curve geometry, a lack of warning signs, or poor surface con...

High Throughput Modeling of Indoor Exposures to Chemicals (SOT)

EPA Science Inventory

Risk due to chemical exposure is a function of both chemical hazard and exposure. Proximate sources of exposure due to the presence of a chemical in consumer products (i.e. near-field exposure) are identified as key drivers of exposure and yet are not well quantified or understo...

How well can we test probabilistic seismic hazard maps?

NASA Astrophysics Data System (ADS)

Vanneste, Kris; Stein, Seth; Camelbeeck, Thierry; Vleminckx, Bart

2017-04-01

Recent large earthquakes that gave rise to shaking much stronger than shown in probabilistic seismic hazard (PSH) maps have stimulated discussion about how well these maps forecast future shaking. These discussions have brought home the fact that although the maps are designed to achieve certain goals, we know little about how well they actually perform. As for any other forecast, this question involves verification and validation. Verification involves assessing how well the algorithm used to produce hazard maps implements the conceptual PSH model ("have we built the model right?"). Validation asks how well the model forecasts the shaking that actually occurs ("have we built the right model?"). We explore the verification issue by simulating shaking histories for an area with assumed uniform distribution of earthquakes, Gutenberg-Richter magnitude-frequency relation, Poisson temporal occurrence model, and ground-motion prediction equation (GMPE). We compare the maximum simulated shaking at many sites over time with that predicted by a hazard map generated for the same set of parameters. The Poisson model predicts that the fraction of sites at which shaking will exceed that of the hazard map is p = 1 - exp(-t/T), where t is the duration of observations and T is the map's return period. Exceedance is typically associated with infrequent large earthquakes, as observed in real cases. The ensemble of simulated earthquake histories yields distributions of fractional exceedance with mean equal to the predicted value. Hence, the PSH algorithm appears to be internally consistent and can be regarded as verified for this set of simulations. However, simulated fractional exceedances show a large scatter about the mean value that decreases with increasing t/T, increasing observation time and increasing Gutenberg-Richter a-value (combining intrinsic activity rate and surface area), but is independent of GMPE uncertainty. This scatter is due to the variability of earthquake recurrence, and so decreases as the largest earthquakes occur in more simulations. Our results are important for evaluating the performance of a hazard map based on misfits in fractional exceedance, and for assessing whether such misfit arises by chance or reflects a bias in the map. More specifically, we determined for a broad range of Gutenberg-Richter a-values theoretical confidence intervals on allowed misfits in fractional exceedance and on the percentage of hazard-map bias that can thus be detected by comparison with observed shaking histories. Given that in the real world we only have one shaking history for an area, these results indicate that even if a hazard map does not fit the observations, it is very difficult to assess its veracity, especially for low-to-moderate-seismicity regions. Because our model is a simplified version of reality, any additional uncertainty or complexity will tend to widen these confidence intervals.

A spatiotemporal multi-hazard exposure assessment based on property data

NASA Astrophysics Data System (ADS)

Fuchs, Sven; Keiler, Margreth; Zischg, Andreas

2016-04-01

The paper presents a nation-wide spatially explicit object-based assessment of buildings and citizens exposed to natural hazards in Austria, including river flooding, torrential flooding, and snow avalanches. The assessment was based on two different datasets, (a) hazard information providing input to the exposure of elements at risk, and (b) information on the building stock combined from different spatial data available on the national level. Hazard information was compiled from two different sources. For torrential flooding and snow avalanches available local-scale hazard maps were used, and for river flooding the results of the countrywide flood modelling eHORA were available. Information on the building stock contained information on the location and size of each building, as well as on the building category and the construction period. Additional information related to the individual floors, such as their height and net area, main purpose and configuration, was included for each property. Moreover, this dataset has an interface to the population register and allowed therefore retrieving the number of primary residents for each building. With the exception of sacral buildings, an economic module was used to compute the monetary value of buildings using (a) the information of the building register such as building type, number of storeys and utilisation, and (b) regionally averaged construction costs. It is shown that the repeatedly-stated assumption of increasing exposure due to continued population growth and related increase in assets has to be carefully evaluated by the local development of building stock. While some regions have shown a clearly above-average increase in assets, other regions were characterised by a below-average development. This mirrors the topography of the country, but also the different economic activities. While hotels and hostels are extraordinary prone to torrential flooding, commercial buildings as well as buildings used for recreation purpose are considerably exposed to river flooding. Residential buildings have shown an average exposure, compared to the number of buildings of this type in the overall building stock. In sum, around 5 % of all buildings are exposed to torrential flooding, and around 9 % to river flooding, with around 1 % of the buildings stock being multi-exposed. The temporal assessment of exposure has shown considerable differences in the dynamics of exposure to different hazard categories in comparison to the overall property stock. In conclusion, the presented object-based assessment is an important and suitable tool for nation-wide exposure assessment and may be used in operational risk management. Reference: Fuchs, S.; Keiler, M. & A. Zischg (2015): A spatiotemporal multi-hazard exposure assessment based on property data. Natural Hazards and Earth System Sciences 15 (9). p. 2127-2142

Additive mixed effect model for recurrent gap time data.

PubMed

Ding, Jieli; Sun, Liuquan

2017-04-01

Gap times between recurrent events are often of primary interest in medical and observational studies. The additive hazards model, focusing on risk differences rather than risk ratios, has been widely used in practice. However, the marginal additive hazards model does not take the dependence among gap times into account. In this paper, we propose an additive mixed effect model to analyze gap time data, and the proposed model includes a subject-specific random effect to account for the dependence among the gap times. Estimating equation approaches are developed for parameter estimation, and the asymptotic properties of the resulting estimators are established. In addition, some graphical and numerical procedures are presented for model checking. The finite sample behavior of the proposed methods is evaluated through simulation studies, and an application to a data set from a clinic study on chronic granulomatous disease is provided.

Assessing Landslide Characteristics and Developing a Landslide Potential Hazard Map in Rwanda and Uganda Using NASA Earth Observations

NASA Astrophysics Data System (ADS)

Sinclair, L.; Conner, P.; le Roux, J.; Finley, T.

2015-12-01

The International Emergency Disasters Database indicates that a total of 482 people have been killed and another 27,530 have been affected by landslides in Rwanda and Uganda, although the actual numbers are thought to be much higher. Data for individual countries are poorly tracked, but hotspots for devastating landslides occur throughout Rwanda and Uganda due to the local topography and soil type, intense rainfall events, and deforestation. In spite of this, there has been little research in this region that utilizes satellite imagery to estimate areas susceptible to landslides. This project utilized Landsat 8 Operational Land Imager (OLI) data and Google Earth to identify landslides that occurred within the study area. These landslides were then added to SERVIR's Global Landslide Catalog (GLC). Next, Landsat 8 OLI, the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM), and Shuttle Radar Topography Mission Version 2 (SRTM V2) data were used to create a Landslide Susceptibility Map. This was combined with population data from the Socioeconomic Data and Applications Center (SEDAC) to create a Landslide Hazard map. A preliminary assessment of the relative performance of GPM and TRMM in identifying landslide conditions was also performed. The additions to the GLC, the Landslide Susceptibility Map, the Landslide Hazard Map, and the preliminary assessment of satellite rainfall performance will be used by SERVIR and the Regional Centre for Mapping of Resources for Development (RCMRD) for disaster risk management, land use planning, and determining landslide conditions and moisture thresholds.

Alcohol facts labels on Four Loko: will the Federal Trade Commission's order be effective in reducing hazardous drinking among underage youth?

PubMed

Esser, Marissa B; Siegel, Michael

2014-11-01

Underage drinking accounts for 4400 alcohol-attributable deaths in the US each year. After several reports of the deaths of young people due to the consumption of the flavored-alcoholic beverage (FAB) Four Loko, the Federal Trade Commission (FTC) examined whether Phusion Projects violated federal law by using deceptive marketing. In 2013, the FTC responded by ordering alcohol facts labels on Four Loko disclosing the number of standard drinks contained in the product. This paper aims to discuss whether the FTC's order for alcohol facts labels on Four Loko cans will effectively reduce the hazardous consumption of FABs among youth. The authors discuss the existing research that relates to the FTC's order, including studies on the effectiveness of serving size labeling for reducing youth drinking, research on the brand-specific consumption of FABs among underage youth, and the associations between youth drinking and exposure to alcohol marketing. After synthesizing the evidence, the authors conclude that simply requiring the disclosure of the number of standard drinks on supersized Four Loko cans is not likely to adequately address the hazardous consumption of this beverage among underage drinkers. Instead, if the FTC addresses the marketing of these products and its potential to encourage the excessive use of alcohol, as the Attorneys General did recently in a settlement with the same company, it is possible that there would be a greater impact on reducing youth alcohol consumption. Additional research is needed to determine the impact of alcohol facts labels in changing underage drinking behaviors.

Early Posttherapy Hospitalizations Among Survivors of Childhood Leukemia and Lymphoma.

PubMed

Smitherman, Andrew B; Wilkins, Tania M; Blatt, Julie; Dusetzina, Stacie B

2016-08-01

Long-term survivors of childhood cancers are at increased risk for hospitalization. To test the hypothesis that many treatment-related morbidities are identifiable in the early posttherapy period, we determined the rates and causes for hospitalization among survivors of leukemia and lymphoma during the first 3 years posttherapy. Using a health plan claims database, we identified patients aged 0 to 21 years old treated for leukemia or lymphoma from 2000 to 2010. Survivors were matched 10:1 with similar children without a history of cancer. Hospitalization rates over 3 years were compared using Cox proportional hazards regression and risks of cause-specific hospitalization were compared using log-binomial models. Nineteen percent of childhood leukemia and lymphoma survivors were hospitalized in the first 3 years off therapy. Leukemia survivors (N=529) experienced over 6 times (hazard ratio=6.3; 95% confidence interval [CI], 4.9-8.0) and lymphoma survivors (N=454) over 3 times the hospitalization rate of controls (hazard ratio=3.2; 95% CI, 2.5-4.2). Compared with children without a cancer history, survivors were at increased risk for hospitalization due to infectious causes (leukemia: relative risk [RR], 60.0; 95% CI, 23.4-154.0; lymphoma: RR, 10.0; 95% CI, 4.4-22.9). In addition, lymphoma survivors were at increased risk for cardiovascular-related (RR, 15.0; 95% CI, 5.4-42.0) and pulmonary-related (RR, 8.1; 95% CI, 3.9-16.8) hospitalizations. These findings highlight the morbidity experienced by survivors and suggest that treatment-associated complications may be emerging soon after therapy completion.

Escalating impacts of climate extremes on critical infrastructures in Europe.

PubMed

Forzieri, Giovanni; Bianchi, Alessandra; Silva, Filipe Batista E; Marin Herrera, Mario A; Leblois, Antoine; Lavalle, Carlo; Aerts, Jeroen C J H; Feyen, Luc

2018-01-01

Extreme climatic events are likely to become more frequent owing to global warming. This may put additional stress on critical infrastructures with typically long life spans. However, little is known about the risks of multiple climate extremes on critical infrastructures at regional to continental scales. Here we show how single- and multi-hazard damage to energy, transport, industrial, and social critical infrastructures in Europe are likely to develop until the year 2100 under the influence of climate change. We combine a set of high-resolution climate hazard projections, a detailed representation of physical assets in various sectors and their sensitivity to the hazards, and more than 1100 records of losses from climate extremes in a prognostic modelling framework. We find that damages could triple by the 2020s, multiply six-fold by mid-century, and amount to more than 10 times present damage of €3.4 billion per year by the end of the century due only to climate change. Damage from heatwaves, droughts in southern Europe, and coastal floods shows the most dramatic rise, but the risks of inland flooding, windstorms, and forest fires will also increase in Europe, with varying degrees of change across regions. Economic losses are highest for the industry, transport, and energy sectors. Future losses will not be incurred equally across Europe. Southern and south-eastern European countries will be most affected and, as a result, will probably require higher costs of adaptation. The findings of this study could aid in prioritizing regional investments to address the unequal burden of impacts and differences in adaptation capacities across Europe.

Hazard assessment of W and Mo sulphide nanomaterials for automotive use

NASA Astrophysics Data System (ADS)

Corazzari, Ingrid; Deorsola, Fabio A.; Gulino, Giulia; Aldieri, Elisabetta; Bensaid, Samir; Turci, Francesco; Fino, Debora

2014-05-01

Engineered nanomaterials (ENMs) are growing in interest and use due to the enhancements envisaged in many applications. ENM hazard identification and exposure scenarios are growing in interest too. Inhalation, ingestion and assimilation through skin during ENM production or use have to be considered as possible events, and potential ENM toxicity has to be investigated before new ENM-based products are placed on the market. To design new ENM-based additive in lubricants for automotive application, the European FP7 Project AddNano is investigating the use of fullerene-like inorganic nanomaterials, including transition metal disulphides. In this work, the potential toxicities of well-characterized pristine MoS2 and WS2 ENMs were evaluated by in vitro cellular and a cell-free chemical tests. Cytotoxicity and oxidative stress on human pulmonary epithelial cells (A549), ENM surface reactivity (free radical production and lipid peroxidation), and ENM durability in simulated biological fluids were evaluated. In all tests, WS2 did not elicit a response significantly different from the negative control. MoS2 showed a moderate cellular toxicity at the highest dose and was inert in all other circumstances. Both WS2 and MoS2 were soluble in simulated biological fluids, suggesting a short durability in vivo. The low overall biological and chemical reactivity of WS2 and MoS2 suggests that tested nanomaterials are unlikely to be an hazard, as far as human respiratory system is concerned. Data could be usefully implemented in the context of environmental risk assessment and life cycle assessment.

Rapid detection of chemical hazards (toxins, dioxins, and PCBs) in seafood.

PubMed

Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Papadopoulou, Anna

2014-01-01

Among the various hazards occurring in fish and seafood chemical hazards and in particular toxins (ciguatera, scombroid fish poisoning, paralytic shellfish poisoning, neurotoxic (brevetoxic) shellfish poisoning, puffer fish poisoning, diarrhetic shellfish poisoning) have an important place in food poisoning cases. On the other hand, some of the chemical hazards are often due to the pollution of the environment (heavy metals, dioxins, polychlorinated biphenyls, and halogenated aromatic hydrocarbons) and their detection is neither rapid nor facile. As a result there was a great need for developing new rapid and effective methods toward the chemical hazards determination mainly because of their high toxicity. The aim of this review is to provide the information about the new up-to-date detection techniques (Immunological, Chemical and Biochemical, and Molecular assays) in conjunction with detection limits. The latter is made possible by means of inclusion of seven comprehensive and, in most case cases, very extended tables. A reference is also made on the risk characterization of toxins as regards their importance to food contamination or poisoning.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

42 CFR 65.9 - Additional conditions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATIONAL INSTITUTE OF ENVIRONMENTAL HEALTH SCIENCES HAZARDOUS WASTE WORKER TRAINING § 65.9 Additional... out of the purposes of the award, the interest of the public health, or the conservation of funds...

Hydrometeorological Hazards: Monitoring, Forecasting, Risk Assessment, and Socioeconomic Responses

NASA Technical Reports Server (NTRS)

Wu, Huan; Huang, Maoyi; Tang, Qiuhong; Kirschbaum, Dalia B.; Ward, Philip

2017-01-01

Hydrometeorological hazards are caused by extreme meteorological and climate events, such as floods, droughts, hurricanes,tornadoes, or landslides. They account for a dominant fraction of natural hazards and occur in all regions of the world, although the frequency and intensity of certain hazards and societies vulnerability to them differ between regions. Severe storms, strong winds, floods, and droughts develop at different spatial and temporal scales, but all can become disasters that cause significant infrastructure damage and claim hundreds of thousands of lives annually worldwide. Oftentimes, multiple hazards can occur simultaneously or trigger cascading impacts from one extreme weather event. For example, in addition to causing injuries, deaths, and material damage, a tropical storm can also result in flooding and mudslides, which can disrupt water purification and sewage disposal systems, cause overflow of toxic wastes, andincrease propagation of mosquito-borne diseases.

Friction on Crack Surfaces During Compression of Explosives - A Possible Ignition Source for Unplanned Explosions Due to Accidental Deformations

DTIC Science & Technology

2008-12-01

samples were conditioned at temperature for at least two hours before measurement. The dimensions of all samples at 0.1 MPa (atmospheric pressure...1. INTRODUCTION Explosives and propellants are often used under conditions of confinement and pressurization. Explosives are confined...lead to hazardous burning conditions (Nicolaides et al, 2000). The results presented here also indicate the possible hazards associated with crack

Joint Ordnance Test Procedure (JOTP)-001 Allied Ammunition Safety and Suitability for Service Assessment Testing Publication - Guidance

DTIC Science & Technology

2013-01-08

hazard due to enemy attack or accident (e.g. Insensitive Munitions (IM) and Electromagnetic Environmental Effects (E3)) and the explosive materials...of mitigating potential explosive remnants of war hazards , particularly from unexploded ordnance , should be conducted. 6.5 Munition Software System...TYPE Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Joint Ordnance Test Procedure (JOTP)-001 Allied Ammunition Safety and

Register-based data of psychosocial working conditions and occupational groups as predictors of disability pension due to musculoskeletal diagnoses: a prospective cohort study of 24 543 Swedish twins

PubMed Central

2013-01-01

Background Occupations and psychosocial working conditions have rarely been investigated as predictors of disability pension in population-based samples. This study investigated how occupational groups and psychosocial working conditions are associated with future disability pension due to musculoskeletal diagnoses, accounting for familial factors in the associations. Methods A sample of 24 543 same-sex Swedish twin individuals was followed from 1993 to 2008 using nationwide registries. Baseline data on occupations were categorized into eight sector-defined occupational groups. These were further used to reflect psychosocial working conditions by applying the job strain scores of a Job Exposure Matrix. Cox proportional hazard ratios (HR) were estimated. Results During the 12-year (average) follow-up, 7% of the sample was granted disability pension due to musculoskeletal diagnoses. Workers in health care and social work; agriculture, forestry and fishing; transportation; production and mining; and the service and military work sectors were two to three times more likely to receive a disability pension than those in the administration and management sector. Each single unit decrease in job demands and each single unit increase in job control and social support significantly predicted disability pension. Individuals with high work strain or an active job had a lower hazard ratio of disability pension, whereas a passive job predicted a significantly higher hazard ratio. Accounting for familial confounding did not alter these results. Conclusion Occupational groups and psychosocial working conditions seem to be independent of familial confounding, and hence represent risk factors for disability pension due to musculoskeletal diagnoses. This means that preventive measures in these sector-defined occupational groups and specific psychosocial working conditions might prevent disability pension due to musculoskeletal diagnoses. PMID:24040914

Adverse outcomes of sick leave due to mental disorders: A prospective study of discordant twin pairs.

PubMed

Mather, Lisa; Blom, Victoria; Bergström, Gunnar; Svedberg, Pia

2017-10-01

The aim of this study was to investigate whether sick leave due to different mental disorders increased the risk of reoccurring sick-leave, disability pension and unemployment, taking genetics and shared environment into account. This register-based cohort study contains 2202 discordant twin pairs 18-64 years old, where one twin had sick leave due to a mental disorder 2005-2006. The end of the sick-leave spell was the start of follow-up for both twins. The twins were followed up for reoccurring sick-leave, disability pension and unemployment (> 180 days in a year), until December 2012. Analyses were censored for disability pension, death, emigration and old-age pension. Cox proportional hazards models with time-varying covariates were used to calculate hazard ratios with 95% confidence intervals (CI). Those with sick leave due to mental disorders had a 3.64 (CI: 3.24-4.08) times higher risk of reoccurring sick-leave within the first two years; after that, hazard ratios were attenuated and explained by genetic factors. The first year, they had 12.24 (CI: 8.11-18.46) times the risk of disability pension. The risk was attenuated but remained at 2.75 (CI: 2.07-3.65) after one year. The risk of unemployment was 1.99 (CI: 1.72-2.31) during the whole follow-up period. The risk of unemployment and disability pension was lower for those with stress-related than other mental disorders, this was less clear for recurrent reoccuring sick-leave. Sick leave due to mental disorders increased the risk of reoccurring sick-leave within two years, disability pension and unemployment, independent of genetics and shared environment.

Register-based data of psychosocial working conditions and occupational groups as predictors of disability pension due to musculoskeletal diagnoses: a prospective cohort study of 24,543 Swedish twins.

PubMed

Ropponen, Annina; Samuelsson, Åsa; Alexanderson, Kristina; Svedberg, Pia

2013-09-16

Occupations and psychosocial working conditions have rarely been investigated as predictors of disability pension in population-based samples. This study investigated how occupational groups and psychosocial working conditions are associated with future disability pension due to musculoskeletal diagnoses, accounting for familial factors in the associations. A sample of 24,543 same-sex Swedish twin individuals was followed from 1993 to 2008 using nationwide registries. Baseline data on occupations were categorized into eight sector-defined occupational groups. These were further used to reflect psychosocial working conditions by applying the job strain scores of a Job Exposure Matrix. Cox proportional hazard ratios (HR) were estimated. During the 12-year (average) follow-up, 7% of the sample was granted disability pension due to musculoskeletal diagnoses. Workers in health care and social work; agriculture, forestry and fishing; transportation; production and mining; and the service and military work sectors were two to three times more likely to receive a disability pension than those in the administration and management sector. Each single unit decrease in job demands and each single unit increase in job control and social support significantly predicted disability pension. Individuals with high work strain or an active job had a lower hazard ratio of disability pension, whereas a passive job predicted a significantly higher hazard ratio. Accounting for familial confounding did not alter these results. Occupational groups and psychosocial working conditions seem to be independent of familial confounding, and hence represent risk factors for disability pension due to musculoskeletal diagnoses. This means that preventive measures in these sector-defined occupational groups and specific psychosocial working conditions might prevent disability pension due to musculoskeletal diagnoses.

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1999-07-20

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Composition and process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1998-03-24

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Composition and process for the encapsulation and stabilization of radioactive hazardous and mixed wastes

DOEpatents

Kalb, Paul D.; Colombo, Peter

1997-01-01

The present invention provides a composition and process for disposal of radioactive, hazardous and mixed wastes. The present invention preferably includes a process for multibarrier encapsulation of radioactive, hazardous and mixed wastes by combining substantially simultaneously dry waste powder, a non-biodegradable thermoplastic polymer and an anhydrous additive in an extruder to form a homogenous molten matrix. The molten matrix may be directed in a "clean" polyethylene liner, allowed to cool, thus forming a monolithic waste form which provides a multibarrier to the dispersion of wastes into the environment.

Thermal treatment of toxic metals of industrial hazardous wastes with fly ash and clay.

PubMed

Singh, I B; Chaturvedi, K; Morchhale, R K; Yegneswaran, A H

2007-03-06

Waste generated from galvanizing and metal finishing processes is considered to be a hazardous due to the presence of toxic metals like Pb, Cu, Cr, Zn, etc. Thermal treatment of such types of wastes in the presence of clay and fly ash can immobilizes their toxic metals to a maximum level. After treatment solidified mass can be utilized in construction or disposed off through land fillings without susceptibility of re-mobilization of toxic metals. In the present investigation locally available clay and fly ash of particular thermal power plant were used as additives for thermal treatment of both of the wastes in their different proportions at 850, 900 and 950 degrees C. Observed results indicated that heating temperature to be a key factor in the immobilization of toxic metals of the waste. It was noticed that the leachability of metals of the waste reduces to a negligible level after heating at 950 degrees C. Thermally treated solidified specimen of 10% waste and remaining clay have shown comparatively a higher compressive strength than clay fired bricks used in building construction. Though, thermally heated specimens made of galvanizing waste have shown much better strength than specimen made of metal finishing waste. The lechability of toxic metals like Cr, Cu, Pb and Zn became far below from their regulatory threshold after heating at 950 degrees C. Addition of fly ash did not show any improvement either in engineering property or in leachability of metals from the solidified mass. X-ray diffraction (XRD) analysis of the solidified product confirmed the presence of mixed phases of oxides of metals.

Integrated biological treatment of fowl manure for nitrogen recovery and reuse.

PubMed

Posmanik, Roy; Nejidat, Ali; Bar-Sinay, Boaz; Gross, Amit

2013-03-15

Biowaste such as animal manure poses an environmental threat, due to among others, uncontrolled emissions of ammonia and additional hazardous gases to the atmosphere. This study presents a quantitative analysis of an alternative biowaste management approach aimed at nitrogen recovery and reduction of contamination risks. The suggested technology combines anaerobic digestion of nitrogen-rich biowaste with biofiltration of the resulting gaseous ammonia. A compost-based biofilter is used to capture the ammonia and convert it to nitrate by nitrifying microorganisms. Nitrogen mass balance was applied to quantify the system's capacity under various fowl manure-loading regimes and ammonia loading rates. The produced nitrate was recovered and its use as liquid fertilizer was evaluated with cucumber plant as a model crop. In addition, emissions of other hazardous gases (N(2)O, CH(4) and H(2)S) were monitored before and after biofiltration to evaluate the efficiency of the system for treating these gases. It was found that nitrate-rich liquid fertilizer can be continuously produced using the suggested approach, with an over 67 percentage of nitrogen recovery, under an ammonia loading rate of up to 40 g NH(3) per cubic meter biofilter per hour. Complete elimination of NH(3), H(2)S, CH(4) and N(2)O was achieved, demonstrating the potential of the suggested technology for mitigating emission of these gases from fowl manure. Moreover, the quality of the recovered fertilizer was demonstrated by higher yield performance of cucumber plant compared with control plants treated with a commonly applied organic liquid fertilizer. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hypervelocity impact effects on solar cells

NASA Technical Reports Server (NTRS)

Rose, M. Frank

1992-01-01

One of the space hazards of concern is the problem of natural matter and space debris impacting spacecraft. In addition to mechanical damage, impact velocities greater than 5 km/sec can produce shock induced ionization effects with resultant surface charging and complex chemical interactions. The upper limit of the velocity distribution for these particles is on the order of 70 km/sec. The second source of particulate matter is due to the presence of man and the machinery needed to place satellites in orbit. This 'man made' component of the space debris consists of waste, rocket exhaust, and debris caused by satellite break-up. Most of the particles are small. However as the size increases, debris purposefully thrown overboard such as garbage and human waste, combined with paint chips, plastic, wire fragments, bolts, etc., become formidable hazards which completely dominate the distribution function for some orbits. These larger fragments can produce penetration and spalling of the thick metallic structures associated with spacecraft. The particles most often encountered are aluminum oxide, associated with fuel residue, and paint chips. These debris types can have a wide range of particle sizes. It has been stated that the design of spacecraft will have to take the debris evolution into account and provide additional suitable armor for key components in the near future. The purpose of this work was to subject samples from solar power arrays, one of the key components of any spacecraft, to a debris flux typical of what might be found in space, and measure the degradation of the power panels after impact.

Hypervelocity impact effects on solar cells

NASA Astrophysics Data System (ADS)

Rose, M. Frank

1992-09-01

One of the space hazards of concern is the problem of natural matter and space debris impacting spacecraft. In addition to mechanical damage, impact velocities greater than 5 km/sec can produce shock induced ionization effects with resultant surface charging and complex chemical interactions. The upper limit of the velocity distribution for these particles is on the order of 70 km/sec. The second source of particulate matter is due to the presence of man and the machinery needed to place satellites in orbit. This 'man made' component of the space debris consists of waste, rocket exhaust, and debris caused by satellite break-up. Most of the particles are small. However as the size increases, debris purposefully thrown overboard such as garbage and human waste, combined with paint chips, plastic, wire fragments, bolts, etc., become formidable hazards which completely dominate the distribution function for some orbits. These larger fragments can produce penetration and spalling of the thick metallic structures associated with spacecraft. The particles most often encountered are aluminum oxide, associated with fuel residue, and paint chips. These debris types can have a wide range of particle sizes. It has been stated that the design of spacecraft will have to take the debris evolution into account and provide additional suitable armor for key components in the near future. The purpose of this work was to subject samples from solar power arrays, one of the key components of any spacecraft, to a debris flux typical of what might be found in space, and measure the degradation of the power panels after impact.

Application of WebGIS for traffic risk assessment

NASA Astrophysics Data System (ADS)

Voumard, Jérémie; Aye, Zar Chi; Derron, Marc-Henri; Jaboyedoff, Michel

2015-04-01

Roads and railways are threatened throughout the year by several natural hazards around the world, leading to the closing of transportation corridors, loss of access, deviation travels and potentially infrastructures damages and loss of human lives and also financial, social and economic consequences. Protection measures used to reduce the exposure to natural hazards are usually expensive and cannot be deployed on an entire transportation network. It is thus necessary to choose priority areas where protection measures need to be built. The aim of this study is to propose a friendly tool to evaluate and to understand issues and consequences of section closing and affected parts of a transportation network at small region scale. The proposed tool, currently in its design and building phase, will provide ways to simulate different closure scenarios and to analyze their consequences on transportation network; like deviating traffic on others roads and railways sections, additional time and distance travel or accessibility for emergency services like police, firefighters and ambulances. The tool is based on OpenGeo architecture, which is composed of open-source components. It integrates PostGIS for database, GeoServer and GeoWebCache for application servers and finally GeoExt and OpenLayers for user interface. Users will be able to attribute quantitative (like roads and railway type and closure consequences) and qualitative (like section unavailability duration, season, etc.) data to the different roads and railways sections based on their user rights. They will also be able to evaluate different track closures consequences in terms of different scenarios. Once finalized, the goal of this project including natural hazards, traffic and geomatic thematic is to propose a decision support tool for public authorities firstly and for specialists secondly so that they can evaluate easily and accurately as much as possible to highlight the weakpoints of the transportation network in the case track closures due to natural hazards.

Investigating Surface and Near-Surface Bushfire Fuel Attributes: A Comparison between Visual Assessments and Image-Based Point Clouds

PubMed Central

Spits, Christine; Wallace, Luke; Reinke, Karin

2017-01-01

Visual assessment, following guides such as the Overall Fuel Hazard Assessment Guide (OFHAG), is a common approach for assessing the structure and hazard of varying bushfire fuel layers. Visual assessments can be vulnerable to imprecision due to subjectivity between assessors, while emerging techniques such as image-based point clouds can offer land managers potentially more repeatable descriptions of fuel structure. This study compared the variability of estimates of surface and near-surface fuel attributes generated by eight assessment teams using the OFHAG and Fuels3D, a smartphone method utilising image-based point clouds, within three assessment plots in an Australian lowland forest. Surface fuel hazard scores derived from underpinning attributes were also assessed. Overall, this study found considerable variability between teams on most visually assessed variables, resulting in inconsistent hazard scores. Variability was observed within point cloud estimates but was, however, on average two to eight times less than that seen in visual estimates, indicating greater consistency and repeatability of this method. It is proposed that while variability within the Fuels3D method may be overcome through improved methods and equipment, inconsistencies in the OFHAG are likely due to the inherent subjectivity between assessors, which may be more difficult to overcome. This study demonstrates the capability of the Fuels3D method to efficiently and consistently collect data on fuel hazard and structure, and, as such, this method shows potential for use in fire management practices where accurate and reliable data is essential. PMID:28425957

A Hazard Assessment and Proposed Risk Index for Art, Architecture, Archive and Artifact Protection: Case Studies for Assorted International Museums

NASA Astrophysics Data System (ADS)

Kirk, Clara J.

This study proposes a hazard/risk index for environmental, technological, and social hazards that may threaten a museum or other place of cultural storage and accession. This index can be utilized and implemented to measure the risk at the locations of these storage facilities in relationship to their geologic, geographic, environmental, and social settings. A model case study of the 1966 flood of the Arno River and its impact on the city of Florence and the Uffizi Gallery was used as the index focus. From this focus an additional eleven museums and their related risk were assessed. Each index addressed a diverse range of hazards based on past frequency and magnitude. It was found that locations nearest a hazard had exceptionally high levels of risk, however more distant locations could have influences that would increase their risk to levels similar to those locations near the hazard. Locations not normally associated with a given natural hazard can be susceptible should the right conditions be met and this research identified, complied and assessed those factions found to influence natural hazard risk at these research sites.

Occupational-level interactions between physical hazards and cognitive ability and skill requirements in predicting injury incidence rates.

PubMed

Ford, Michael T; Wiggins, Bryan K

2012-07-01

Interactions between occupational-level physical hazards and cognitive ability and skill requirements were examined as predictors of injury incidence rates as reported by the U. S. Bureau of Labor Statistics. Based on ratings provided in the Occupational Information Network (O*NET) database, results across 563 occupations indicate that physical hazards at the occupational level were strongly related to injury incidence rates. Also, as expected, the physical hazard-injury rate relationship was stronger among occupations with high cognitive ability and skill requirements. In addition, there was an unexpected main effect such that occupations with high cognitive ability and skill requirements had lower injury rates even after controlling for physical hazards. The main effect of cognitive ability and skill requirements, combined with the interaction with physical hazards, resulted in unexpectedly high injury rates for low-ability and low-skill occupations with low physical hazard levels. Substantive and methodological explanations for these interactions and their theoretical and practical implications are offered. Results suggest that organizations and occupational health and safety researchers and practitioners should consider the occupational level of analysis and interactions between physical hazards and cognitive requirements in future research and practice when attempting to understand and prevent injuries.

Beer drinking accounts for most of the hazardous alcohol consumption reported in the United States.

PubMed

Rogers, J D; Greenfield, T K

1999-11-01

Patterns and correlates of hazardous drinking, defined as occasions in which five or more drinks were consumed in a day, were compared for wine, beer and distilled spirits. From a probability sample of the U.S. adult household population, 2,817 respondents who had consumed at least one drink in the previous year were selected for analysis. The results show that, in the U.S., beer accounts for the bulk of alcohol consumed by the heaviest drinkers. Beer also accounts for a disproportionate share of hazardous drinking. Logistic regression analyses revealed that drinkers who consume beer in a hazardous fashion at least monthly are more likely to be young, male and unmarried, and less likely to be black than are other drinkers. Hazardous beer consumption is more predictive of alcohol-related problems than hazardous consumption of wine or spirits. Three potential explanations for the results are considered: advertising, beer-drinking subcultures and risk compensation. Additional research is urged in order to better specify the causal role of these and other factors in hazardous beer drinking.

Controlling organic chemical hazards in food manufacturing: a hazard analysis critical control points (HACCP) approach.

PubMed

Ropkins, K; Beck, A J

2002-08-01

Hazard analysis by critical control points (HACCP) is a systematic approach to the identification, assessment and control of hazards. Effective HACCP requires the consideration of all hazards, i.e., chemical, microbiological and physical. However, to-date most 'in-place' HACCP procedures have tended to focus on the control of microbiological and physical food hazards. In general, the chemical component of HACCP procedures is either ignored or limited to applied chemicals, e.g., food additives and pesticides. In this paper we discuss the application of HACCP to a broader range of chemical hazards, using organic chemical contaminants as examples, and the problems that are likely to arise in the food manufacturing sector. Chemical HACCP procedures are likely to result in many of the advantages previously identified for microbiological HACCP procedures: more effective, efficient and economical than conventional end-point-testing methods. However, the high costs of analytical monitoring of chemical contaminants and a limited understanding of formulation and process optimisation as means of controlling chemical contamination of foods are likely to prevent chemical HACCP becoming as effective as microbiological HACCP.