Science.gov

Sample records for additional measures include

  1. Photoactive devices including porphyrinoids with coordinating additives

    DOEpatents

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  2. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    NASA Technical Reports Server (NTRS)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  3. Measurement of toverline{t} production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √{s} = 8 {TeV}

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; de Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; van de Klundert, M.; van Haevermaet, H.; van Mechelen, P.; van Remortel, N.; van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; de Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; van Doninck, W.; van Mulders, P.; van Onsem, G. P.; van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; de Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-Conde, A.; Reis, T.; Seva, T.; Vander Velde, C.; Yonamine, R.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Adler, V.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; McCartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Strobbe, N.; Tytgat, M.; van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Júnior, W. L. Aldá; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; da Costa, E. M.; de Jesus Damiao, D.; de Oliveira Martins, C.; Fonseca de Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; de Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; El Sawy, M.; El-Khateeb, E.; Elkafrawy, T.; Mohamed, A.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.; Merlin, J. A.; Skovpen, K.; van Hove, P.; Gadrat, S.; Beauceron, S.; Bernet, C.; Boudoul, G.; Bouvier, E.; Carrillo Montoya, C. A.; Chierici, R.; Contardo, D.; Courbon, B.; Depasse, P.; El Mamouni, H.; Fan, J.; Fay, J.; Gascon, S.; Gouzevitch, M.; Ille, B.; Lagarde, F.; Laktineh, I. B.; Lethuillier, M.; Mirabito, L.; Pequegnot, A. L.; Perries, S.; Ruiz Alvarez, J. D.; Sabes, D.; Sgandurra, L.; Sordini, V.; Vander Donckt, M.; Verdier, P.; Viret, S.; Toriashvili, T.; Lomidze, D.; Autermann, C.; Beranek, S.; Edelhoff, M.; Feld, L.; Heister, A.; Kiesel, M. K.; Klein, K.; Lipinski, M.; Ostapchuk, A.; Preuten, M.; Raupach, F.; Schael, S.; Schulte, J. F.; Verlage, T.; Weber, H.; Wittmer, B.; Zhukov, V.; Ata, M.; Brodski, M.; Dietz-Laursonn, E.; Duchardt, D.; Endres, M.; Erdmann, M.; Erdweg, S.; Esch, T.; Fischer, R.; Güth, A.; Hebbeker, T.; Heidemann, C.; Hoepfner, K.; Klingebiel, D.; Knutzen, S.; Kreuzer, P.; Merschmeyer, M.; Meyer, A.; Millet, P.; Olschewski, M.; Padeken, K.; Papacz, P.; Pook, T.; Radziej, M.; Reithler, H.; Rieger, M.; Scheuch, F.; Sonnenschein, L.; Teyssier, D.; Thüer, S.; Cherepanov, V.; Erdogan, Y.; Flügge, G.; Geenen, H.; Geisler, M.; Hoehle, F.; Kargoll, B.; Kress, T.; Kuessel, Y.; Künsken, A.; Lingemann, J.; Nehrkorn, A.; Nowack, A.; Nugent, I. M.; Pistone, C.; Pooth, O.; Stahl, A.; Aldaya Martin, M.; Asin, I.; Bartosik, N.; Behnke, O.; Behrens, U.; Bell, A. J.; Borras, K.; Burgmeier, A.; Campbell, A.; Choudhury, S.; Costanza, F.; Diez Pardos, C.; Dolinska, G.; Dooling, S.; Dorland, T.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Flucke, G.; Gallo, E.; Garcia, J. Garay; Geiser, A.; Gizhko, A.; Gunnellini, P.; Hauk, J.; Hempel, M.; Jung, H.; Kalogeropoulos, A.; Karacheban, O.; Kasemann, M.; Katsas, P.; Kieseler, J.; Kleinwort, C.; Korol, I.; Lange, W.; Leonard, J.; Lipka, K.; Lobanov, A.; Lohmann, W.; Mankel, R.; Marfin, I.; Melzer-Pellmann, I.-A.; Meyer, A. B.; Mittag, G.; Mnich, J.; Mussgiller, A.; Naumann-Emme, S.; Nayak, A.; Ntomari, E.; Perrey, H.; Pitzl, D.; Placakyte, R.; Raspereza, A.; Roland, B.; Sahin, M. Ö.; Saxena, P.; Schoerner-Sadenius, T.; Schröder, M.; Seitz, C.; Spannagel, S.; Trippkewitz, K. D.; Walsh, R.; Wissing, C.; Blobel, V.; Centis Vignali, M.; Draeger, A. R.; Erfle, J.; Garutti, E.; Goebel, K.; Gonzalez, D.; Görner, M.; Haller, J.; Hoffmann, M.; Höing, R. S.; Junkes, A.; Klanner, R.; Kogler, R.; Lapsien, T.; Lenz, T.; Marchesini, I.; Marconi, D.; Meyer, M.; Nowatschin, D.; Ott, J.; Pantaleo, F.; Peiffer, T.; Perieanu, A.; Pietsch, N.; Poehlsen, J.; Rathjens, D.; Sander, C.; Schettler, H.; Schleper, P.; Schlieckau, E.; Schmidt, A.; Schwandt, J.; Sola, V.; Stadie, H.; Steinbrück, G.; Tholen, H.; Troendle, D.; Usai, E.; Vanelderen, L.; Vanhoefer, A.; Vormwald, B.; Akbiyik, M.; Barth, C.; Baus, C.; Berger, J.; Böser, C.; Butz, E.; Chwalek, T.; Colombo, F.; de Boer, W.; Descroix, A.; Dierlamm, A.; Fink, S.; Frensch, F.; Friese, R.; Giffels, M.; Gilbert, A.; Haitz, D.; Hartmann, F.; Heindl, S. M.; Husemann, U.; Katkov, I.; Kornmayer, A.; Lobelle Pardo, P.; Maier, B.; Mildner, H.; Mozer, M. U.; Müller, T.; Müller, Th.; Plagge, M.; Quast, G.; Rabbertz, K.; Röcker, S.; Roscher, F.; Sieber, G.; Simonis, H. J.; Stober, F. M.; Ulrich, R.; Wagner-Kuhr, J.; Wayand, S.; Weber, M.; Weiler, T.; Wöhrmann, C.; Wolf, R.; Anagnostou, G.; Daskalakis, G.; Geralis, T.; Giakoumopoulou, V. A.; Kyriakis, A.; Loukas, D.; Psallidas, A.; Topsis-Giotis, I.; Agapitos, A.; Kesisoglou, S.; Panagiotou, A.; Saoulidou, N.; Tziaferi, E.; Evangelou, I.; Flouris, G.; Foudas, C.; Kokkas, P.; Loukas, N.; Manthos, N.; Papadopoulos, I.; Paradas, E.; Strologas, J.; Bencze, G.; Hajdu, C.; Hazi, A.; Hidas, P.; Horvath, D.; Sikler, F.; Veszpremi, V.; Vesztergombi, G.; Zsigmond, A. J.; Beni, N.; Czellar, S.; Karancsi, J.; Molnar, J.; Szillasi, Z.; Bartók, M.; Makovec, A.; Raics, P.; Trocsanyi, Z. L.; Ujvari, B.; Mal, P.; Mandal, K.; Sahoo, D. K.; Sahoo, N.; Swain, S. K.; Bansal, S.; Beri, S. B.; Bhatnagar, V.; Chawla, R.; Gupta, R.; Bhawandeep, U.; Kalsi, A. K.; Kaur, A.; Kaur, M.; Kumar, R.; Mehta, A.; Mittal, M.; Singh, J. B.; Walia, G.; Kumar, Ashok; Bhardwaj, A.; Choudhary, B. C.; Garg, R. B.; Kumar, A.; Malhotra, S.; Naimuddin, M.; Nishu, N.; Ranjan, K.; Sharma, R.; Sharma, V.; Bhattacharya, S.; Chatterjee, K.; Dey, S.; Dutta, S.; Jain, Sa.; Majumdar, N.; Modak, A.; Mondal, K.; Mukherjee, S.; Mukhopadhyay, S.; Roy, A.; Roy, D.; Roy Chowdhury, S.; Sarkar, S.; Sharan, M.; Abdulsalam, A.; Chudasama, R.; Dutta, D.; Jha, V.; Kumar, V.; Mohanty, A. K.; Pant, L. M.; Shukla, P.; Topkar, A.; Aziz, T.; Banerjee, S.; Bhowmik, S.; Chatterjee, R. M.; Dewanjee, R. K.; Dugad, S.; Ganguly, S.; Ghosh, S.; Guchait, M.; Gurtu, A.; Kole, G.; Kumar, S.; Mahakud, B.; Maity, M.; Majumder, G.; Mazumdar, K.; Mitra, S.; Mohanty, G. B.; Parida, B.; Sarkar, T.; Sur, N.; Sutar, B.; Wickramage, N.; Chauhan, S.; Dube, S.; Sharma, S.; Bakhshiansohi, H.; Behnamian, H.; Etesami, S. M.; Fahim, A.; Goldouzian, R.; Khakzad, M.; Mohammadi Najafabadi, M.; Naseri, M.; Paktinat Mehdiabadi, S.; Rezaei Hosseinabadi, F.; Safarzadeh, B.; Zeinali, M.; Felcini, M.; Grunewald, M.; Abbrescia, M.; Calabria, C.; Caputo, C.; Colaleo, A.; Creanza, D.; Cristella, L.; de Filippis, N.; de Palma, M.; Fiore, L.; Iaselli, G.; Maggi, G.; Miniello, G.; Maggi, M.; My, S.; Nuzzo, S.; Pompili, A.; Pugliese, G.; Radogna, R.; Ranieri, A.; Selvaggi, G.; Silvestris, L.; Venditti, R.; Verwilligen, P.; Abbiendi, G.; Battilana, C.; Benvenuti, A. C.; Bonacorsi, D.; Braibant-Giacomelli, S.; Brigliadori, L.; Campanini, R.; Capiluppi, P.; Castro, A.; Cavallo, F. R.; Chhibra, S. S.; Codispoti, G.; Cuffiani, M.; Dallavalle, G. M.; Fabbri, F.; Fanfani, A.; Fasanella, D.; Giacomelli, P.; Grandi, C.; Guiducci, L.; Marcellini, S.; Masetti, G.; Montanari, A.; Navarria, F. L.; Perrotta, A.; Rossi, A. M.; Primavera, F.; Rovelli, T.; Siroli, G. P.; Tosi, N.; Travaglini, R.; Cappello, G.; Chiorboli, M.; Costa, S.; di Mattia, A.; Giordano, F.; Potenza, R.; Tricomi, A.; Tuve, C.; Barbagli, G.; Ciulli, V.; Civinini, C.; D'Alessandro, R.; Focardi, E.; Gonzi, S.; Gori, V.; Lenzi, P.; Meschini, M.; Paoletti, S.; Sguazzoni, G.; Tropiano, A.; Viliani, L.; Benussi, L.; Bianco, S.; Fabbri, F.; Piccolo, D.; Primavera, F.; Calvelli, V.; Ferro, F.; Lo Vetere, M.; Monge, M. R.; Robutti, E.; Tosi, S.; Brianza, L.; Dinardo, M. E.; Fiorendi, S.; Gennai, S.; Gerosa, R.; Ghezzi, A.; Govoni, P.; Malvezzi, S.; Manzoni, R. A.; Marzocchi, B.; Menasce, D.; Moroni, L.; Paganoni, M.; Pedrini, D.; Ragazzi, S.; Redaelli, N.; Tabarelli de Fatis, T.; Buontempo, S.; Cavallo, N.; di Guida, S.; Esposito, M.; Fabozzi, F.; Iorio, A. O. M.; Lanza, G.; Lista, L.; Meola, S.; Merola, M.; Paolucci, P.; Sciacca, C.; Thyssen, F.; Azzi, P.; Bacchetta, N.; Bellato, M.; Benato, L.; Bisello, D.; Boletti, A.; Carlin, R.; Checchia, P.; Dall'Osso, M.; Dorigo, T.; Dosselli, U.; Fanzago, F.; Gasparini, F.; Gasparini, U.; Gonella, F.; Gozzelino, A.; Lacaprara, S.; Margoni, M.; Meneguzzo, A. T.; Pazzini, J.; Pozzobon, N.; Ronchese, P.; Simonetto, F.; Torassa, E.; Tosi, M.; Zanetti, M.; Zotto, P.; Zucchetta, A.; Zumerle, G.; Braghieri, A.; Magnani, A.; Montagna, P.; Ratti, S. P.; Re, V.; Riccardi, C.; Salvini, P.; Vai, I.; Vitulo, P.; Alunni Solestizi, L.; Biasini, M.; Bilei, G. M.; Ciangottini, D.; Fanò, L.; Lariccia, P.; Mantovani, G.; Menichelli, M.; Saha, A.; Santocchia, A.; Androsov, K.; Azzurri, P.; Bagliesi, G.; Bernardini, J.; Boccali, T.; Castaldi, R.; Ciocci, M. A.; Dell'Orso, R.; Donato, S.; Fedi, G.; Fiori, F.; Foà, L.; Giassi, A.; Grippo, M. T.; Ligabue, F.; Lomtadze, T.; Martini, L.; Messineo, A.; Palla, F.; Rizzi, A.; Savoy-Navarro, A.; Serban, A. T.; Spagnolo, P.; Tenchini, R.; Tonelli, G.; Venturi, A.; Verdini, P. G.; Barone, L.; Cavallari, F.; D'Imperio, G.; Del Re, D.; Diemoz, M.; Gelli, S.; Jorda, C.; Longo, E.; Margaroli, F.; Meridiani, P.; Organtini, G.; Paramatti, R.; Preiato, F.; Rahatlou, S.; Rovelli, C.; Santanastasio, F.; Traczyk, P.; Amapane, N.; Arcidiacono, R.; Argiro, S.; Arneodo, M.; Bellan, R.; Biino, C.; Cartiglia, N.; Costa, M.; Covarelli, R.; Degano, A.; Demaria, N.; Finco, L.; Kiani, B.; Mariotti, C.; Maselli, S.; Migliore, E.; Monaco, V.; Monteil, E.; Obertino, M. M.; Pacher, L.; Pastrone, N.; Pelliccioni, M.; Pinna Angioni, G. L.; Ravera, F.; Potenza, A.; Romero, A.; Ruspa, M.; Sacchi, R.; Solano, A.; Staiano, A.; Tamponi, U.; Belforte, S.; Candelise, V.; Casarsa, M.; Cossutti, F.; Della Ricca, G.; Gobbo, B.; La Licata, C.; Marone, M.; Schizzi, A.; Zanetti, A.; Kropivnitskaya, T. A.; Nam, S. K.; Kim, D. H.; Kim, G. N.; Kim, M. S.; Kim, M. S.; Kong, D. J.; Lee, S.; Oh, Y. D.; Sakharov, A.; Son, D. C.; Brochero Cifuentes, J. A.; Kim, H.; Kim, T. J.; Song, S.; Choi, S.; Go, Y.; Gyun, D.; Hong, B.; Jo, M.; Kim, H.; Kim, Y.; Lee, B.; Lee, K.; Lee, K. S.; Lee, S.; Lee, S.; Park, S. K.; Roh, Y.; Yoo, H. D.; Choi, M.; Kim, H.; Kim, J. H.; Lee, J. S. H.; Park, I. C.; Ryu, G.; Ryu, M. S.; Choi, Y.; Goh, J.; Kim, D.; Kwon, E.; Lee, J.; Yu, I.; Juodagalvis, A.; Vaitkus, J.; Ahmed, I.; Ibrahim, Z. A.; Komaragiri, J. R.; Md Ali, M. A. B.; Mohamad Idris, F.; Wan Abdullah, W. A. T.; Yusli, M. N.; Wan Abdullah, W. A. T.; Casimiro Linares, E.; Castilla-Valdez, H.; de La Cruz-Burelo, E.; Heredia-de La Cruz, I.; Hernandez-Almada, A.; Lopez-Fernandez, R.; Sanchez-Hernandez, A.; Carrillo Moreno, S.; Vazquez Valencia, F.; Pedraza, I.; Salazar Ibarguen, H. A.; Morelos Pineda, A.; Krofcheck, D.; Butler, P. H.; Ahmad, A.; Ahmad, M.; Hassan, Q.; Hoorani, H. R.; Khan, W. A.; Khurshid, T.; Shoaib, M.; Bialkowska, H.; Bluj, M.; Boimska, B.; Frueboes, T.; Górski, M.; Kazana, M.; Nawrocki, K.; Romanowska-Rybinska, K.; Szleper, M.; Zalewski, P.; Brona, G.; Bunkowski, K.; Byszuk, A.; Doroba, K.; Kalinowski, A.; Konecki, M.; Krolikowski, J.; Misiura, M.; Olszewski, M.; Walczak, M.; Bargassa, P.; da Cruz E Silva, C. Beir Ao; di Francesco, A.; Faccioli, P.; Parracho, P. G. Ferreira; Gallinaro, M.; Leonardo, N.; Lloret Iglesias, L.; Nguyen, F.; Rodrigues Antunes, J.; Seixas, J.; Toldaiev, O.; Vadruccio, D.; Varela, J.; Vischia, P.; Afanasiev, S.; Bunin, P.; Gavrilenko, M.; Golutvin, I.; Gorbunov, I.; Kamenev, A.; Karjavin, V.; Konoplyanikov, V.; Lanev, A.; Malakhov, A.; Matveev, V.; Moisenz, P.; Palichik, V.; Perelygin, V.; Savina, M.; Shmatov, S.; Shulha, S.; Smirnov, V.; Zarubin, A.; Golovtsov, V.; Ivanov, Y.; Kim, V.; Kuznetsova, E.; Levchenko, P.; Murzin, V.; Oreshkin, V.; Smirnov, I.; Sulimov, V.; Uvarov, L.; Vavilov, S.; Vorobyev, A.; Andreev, Yu.; Dermenev, A.; Gninenko, S.; Golubev, N.; Karneyeu, A.; Kirsanov, M.; Krasnikov, N.; Pashenkov, A.; Tlisov, D.; Toropin, A.; Epshteyn, V.; Gavrilov, V.; Lychkovskaya, N.; Popov, V.; Pozdnyakov, L.; Safronov, G.; Spiridonov, A.; Vlasov, E.; Zhokin, A.; Bylinkin, A.; Andreev, V.; Azarkin, M.; Dremin, I.; Kirakosyan, M.; Leonidov, A.; Mesyats, G.; Rusakov, S. V.; Baskakov, A.; Belyaev, A.; Boos, E.; Bunichev, V.; Dubinin, M.; Dudko, L.; Klyukhin, V.; Kodolova, O.; Korneeva, N.; Lokhtin, I.; Myagkov, I.; Obraztsov, S.; Perfilov, M.; Petrushanko, S.; Savrin, V.; Azhgirey, I.; Bayshev, I.; Bitioukov, S.; Kachanov, V.; Kalinin, A.; Konstantinov, D.; Krychkine, V.; Petrov, V.; Ryutin, R.; Sobol, A.; Tourtchanovitch, L.; Troshin, S.; Tyurin, N.; Uzunian, A.; Volkov, A.; Adzic, P.; Milosevic, J.; Rekovic, V.; Alcaraz Maestre, J.; Battilana, C.; Calvo, E.; Cerrada, M.; Chamizo Llatas, M.; Colino, N.; de La Cruz, B.; Delgado Peris, A.; Domínguez Vázquez, D.; Escalante Del Valle, A.; Fernandez Bedoya, C.; Ramos, J. P. Fernández; Flix, J.; Fouz, M. C.; Garcia-Abia, P.; Gonzalez Lopez, O.; Goy Lopez, S.; Hernandez, J. M.; Josa, M. I.; Navarro de Martino, E.; Yzquierdo, A. Pérez-Calero; Puerta Pelayo, J.; Quintario Olmeda, A.; Redondo, I.; Romero, L.; Santaolalla, J.; Soares, M. S.; Albajar, C.; de Trocóniz, J. F.; Missiroli, M.; Moran, D.; Cuevas, J.; Fernandez Menendez, J.; Folgueras, S.; Gonzalez Caballero, I.; Palencia Cortezon, E.; Vizan Garcia, J. M.; Cabrillo, I. J.; Calderon, A.; Castiñeiras de Saa, J. R.; de Castro Manzano, P.; Duarte Campderros, J.; Fernandez, M.; Garcia-Ferrero, J.; Gomez, G.; Lopez Virto, A.; Marco, J.; Marco, R.; Martinez Rivero, C.; Matorras, F.; Munoz Sanchez, F. J.; Piedra Gomez, J.; Rodrigo, T.; Rodríguez-Marrero, A. Y.; Ruiz-Jimeno, A.; Scodellaro, L.; Trevisani, N.; Vila, I.; Vilar Cortabitarte, R.; Abbaneo, D.; Auffray, E.; Auzinger, G.; Bachtis, M.; Baillon, P.; Ball, A. H.; Barney, D.; Benaglia, A.; Bendavid, J.; Benhabib, L.; Benitez, J. F.; Berruti, G. M.; Bloch, P.; Bocci, A.; Bonato, A.; Botta, C.; Breuker, H.; Camporesi, T.; Castello, R.; Cerminara, G.; D'Alfonso, M.; D'Enterria, D.; Dabrowski, A.; Daponte, V.; David, A.; de Gruttola, M.; de Guio, F.; de Roeck, A.; de Visscher, S.; di Marco, E.; Dobson, M.; Dordevic, M.; Dorney, B.; Du Pree, T.; Dünser, M.; Dupont, N.; Elliott-Peisert, A.; Franzoni, G.; Funk, W.; Gigi, D.; Gill, K.; Giordano, D.; Girone, M.; Glege, F.; Guida, R.; Gundacker, S.; Guthoff, M.; Hammer, J.; Harris, P.; Hegeman, J.; Innocente, V.; Janot, P.; Kirschenmann, H.; Kortelainen, M. J.; Kousouris, K.; Krajczar, K.; Lecoq, P.; Lourenço, C.; Lucchini, M. T.; Magini, N.; Malgeri, L.; Mannelli, M.; Martelli, A.; Masetti, L.; Meijers, F.; Mersi, S.; Meschi, E.; Moortgat, F.; Morovic, S.; Mulders, M.; Nemallapudi, M. V.; Neugebauer, H.; Orfanelli, S.; Orsini, L.; Pape, L.; Perez, E.; Peruzzi, M.; Petrilli, A.; Petrucciani, G.; Pfeiffer, A.; Piparo, D.; Racz, A.; Rolandi, G.; Rovere, M.; Ruan, M.; Sakulin, H.; Schäfer, C.; Schwick, C.; Seidel, M.; Sharma, A.; Silva, P.; Simon, M.; Sphicas, P.; Steggemann, J.; Stieger, B.; Stoye, M.; Takahashi, Y.; Treille, D.; Triossi, A.; Tsirou, A.; Veres, G. I.; Wardle, N.; Wöhri, H. K.; Zagozdzinska, A.; Zeuner, W. D.; Bertl, W.; Deiters, K.; Erdmann, W.; Horisberger, R.; Ingram, Q.; Kaestli, H. C.; Kotlinski, D.; Langenegger, U.; Renker, D.; Rohe, T.; Bachmair, F.; Bäni, L.; Bianchini, L.; Casal, B.; Dissertori, G.; Dittmar, M.; Donegà, M.; Eller, P.; Grab, C.; Heidegger, C.; Hits, D.; Hoss, J.; Kasieczka, G.; Lustermann, W.; Mangano, B.; Marionneau, M.; Martinez Ruiz Del Arbol, P.; Masciovecchio, M.; Meister, D.; Micheli, F.; Musella, P.; Nessi-Tedaldi, F.; Pandolfi, F.; Pata, J.; Pauss, F.; Perrozzi, L.; Quittnat, M.; Rossini, M.; Starodumov, A.; Takahashi, M.; Tavolaro, V. R.; Theofilatos, K.; Wallny, R.; Aarrestad, T. K.; Amsler, C.; Caminada, L.; Canelli, M. F.; Chiochia, V.; de Cosa, A.; Galloni, C.; Hinzmann, A.; Hreus, T.; Kilminster, B.; Lange, C.; Ngadiuba, J.; Pinna, D.; Robmann, P.; Ronga, F. J.; Salerno, D.; Yang, Y.; Cardaci, M.; Chen, K. H.; Doan, T. H.; Jain, Sh.; Khurana, R.; Konyushikhin, M.; Kuo, C. M.; Lin, W.; Lu, Y. J.; Yu, S. S.; Kumar, Arun; Bartek, R.; Chang, P.; Chang, Y. H.; Chao, Y.; Chen, K. F.; Chen, P. H.; Dietz, C.; Fiori, F.; Grundler, U.; Hou, W.-S.; Hsiung, Y.; Liu, Y. F.; Lu, R.-S.; Miñano Moya, M.; Petrakou, E.; Tsai, J. F.; Tzeng, Y. M.; Asavapibhop, B.; Kovitanggoon, K.; Singh, G.; Srimanobhas, N.; Suwonjandee, N.; Adiguzel, A.; Cerci, S.; Demiroglu, Z. S.; Dozen, C.; Dumanoglu, I.; Girgis, S.; Gokbulut, G.; Guler, Y.; Guler, Y.; Gurpinar, E.; Hos, I.; Kangal, E. E.; Kayis Topaksu, A.; Onengut, G.; Ozdemir, K.; Ozturk, S.; Tali, B.; Topakli, H.; Vergili, M.; Zorbilmez, C.; Akin, I. V.; Bilin, B.; Bilmis, S.; Isildak, B.; Karapinar, G.; Yalvac, M.; Zeyrek, M.; Gülmez, E.; Kaya, M.; Kaya, O.; Yetkin, E. A.; Yetkin, T.; Cakir, A.; Cankocak, K.; Sen, S.; Vardarlı, F. I.; Grynyov, B.; Levchuk, L.; Sorokin, P.; Aggleton, R.; Ball, F.; Beck, L.; Brooke, J. J.; Clement, E.; Cussans, D.; Flacher, H.; Goldstein, J.; Grimes, M.; Heath, G. P.; Heath, H. F.; Jacob, J.; Kreczko, L.; Lucas, C.; Meng, Z.; Newbold, D. M.; Paramesvaran, S.; Poll, A.; Sakuma, T.; Seif El Nasr-Storey, S.; Senkin, S.; Smith, D.; Smith, V. J.; Bell, K. W.; Belyaev, A.; Brew, C.; Brown, R. M.; Calligaris, L.; Cieri, D.; Cockerill, D. J. A.; Coughlan, J. A.; Harder, K.; Harper, S.; Olaiya, E.; Petyt, D.; Shepherd-Themistocleous, C. H.; Thea, A.; Tomalin, I. R.; Williams, T.; Womersley, W. J.; Worm, S. D.; Baber, M.; Bainbridge, R.; Buchmuller, O.; Bundock, A.; Burton, D.; Casasso, S.; Citron, M.; Colling, D.; Corpe, L.; Cripps, N.; Dauncey, P.; Davies, G.; de Wit, A.; Della Negra, M.; Dunne, P.; Elwood, A.; Elwood, A.; Ferguson, W.; Fulcher, J.; Futyan, D.; Hall, G.; Iles, G.; Kenzie, M.; Lane, R.; Lucas, R.; Lyons, L.; Magnan, A.-M.; Malik, S.; Nash, J.; Nikitenko, A.; Pela, J.; Pesaresi, M.; Petridis, K.; Raymond, D. M.; Richards, A.; Rose, A.; Seez, C.; Tapper, A.; Uchida, K.; Vazquez Acosta, M.; Virdee, T.; Zenz, S. C.; Cole, J. E.; Hobson, P. R.; Khan, A.; Kyberd, P.; Leggat, D.; Leslie, D.; Reid, I. D.; Symonds, P.; Teodorescu, L.; Turner, M.; Borzou, A.; Call, K.; Dittmann, J.; Hatakeyama, K.; Liu, H.; Pastika, N.; Scarborough, T.; Wu, Z.; Charaf, O.; Cooper, S. I.; Henderson, C.; Rumerio, P.; Arcaro, D.; Avetisyan, A.; Bose, T.; Fantasia, C.; Gastler, D.; Lawson, P.; Rankin, D.; Richardson, C.; Rohlf, J.; St. John, J.; Sulak, L.; Zou, D.; Alimena, J.; Berry, E.; Bhattacharya, S.; Cutts, D.; Dhingra, N.; Ferapontov, A.; Garabedian, A.; Hakala, J.; Heintz, U.; Laird, E.; Landsberg, G.; Mao, Z.; Narain, M.; Piperov, S.; Sagir, S.; Syarif, R.; Breedon, R.; Breto, G.; de La Barca Sanchez, M. Calderon; Chauhan, S.; Chertok, M.; Conway, J.; Conway, R.; Cox, P. T.; Erbacher, R.; Gardner, M.; Ko, W.; Lander, R.; Mulhearn, M.; Pellett, D.; Pilot, J.; Ricci-Tam, F.; Shalhout, S.; Smith, J.; Squires, M.; Stolp, D.; Tripathi, M.; Wilbur, S.; Yohay, R.; Cousins, R.; Everaerts, P.; Farrell, C.; Hauser, J.; Ignatenko, M.; Saltzberg, D.; Valuev, V.; Weber, M.; Burt, K.; Clare, R.; Ellison, J.; Gary, J. W.; Hanson, G.; Heilman, J.; Ivova Paneva, M.; Jandir, P.; Kennedy, E.; Lacroix, F.; Long, O. R.; Luthra, A.; Malberti, M.; Negrete, M. Olmedo; Shrinivas, A.; Wei, H.; Wimpenny, S.; Yates, B. R.; Branson, J. G.; Cerati, G. B.; Cittolin, S.; D'Agnolo, R. T.; Derdzinski, M.; Holzner, A.; Kelley, R.; Klein, D.; Letts, J.; MacNeill, I.; Olivito, D.; Padhi, S.; Pieri, M.; Sani, M.; Sharma, V.; Simon, S.; Tadel, M.; Tu, Y.; Vartak, A.; Wasserbaech, S.; Welke, C.; Würthwein, F.; Yagil, A.; Zevi Della Porta, G.; Bradmiller-Feld, J.; Campagnari, C.; Dishaw, A.; Dutta, V.; Flowers, K.; Franco Sevilla, M.; Geffert, P.; George, C.; Golf, F.; Gouskos, L.; Gran, J.; Incandela, J.; McColl, N.; Mullin, S. D.; Mullin, S. D.; Richman, J.; Stuart, D.; Suarez, I.; West, C.; Yoo, J.; Anderson, D.; Apresyan, A.; Bornheim, A.; Bunn, J.; Chen, Y.; Duarte, J.; Mott, A.; Newman, H. B.; Pena, C.; Pierini, M.; Spiropulu, M.; Vlimant, J. R.; Xie, S.; Zhu, R. Y.; Andrews, M. B.; Azzolini, V.; Calamba, A.; Carlson, B.; Ferguson, T.; Paulini, M.; Russ, J.; Sun, M.; Vogel, H.; Vorobiev, I.; Cumalat, J. P.; Ford, W. T.; Gaz, A.; Jensen, F.; Johnson, A.; Krohn, M.; Mulholland, T.; Nauenberg, U.; Stenson, K.; Wagner, S. R.; Alexander, J.; Chatterjee, A.; Chaves, J.; Chu, J.; Dittmer, S.; Eggert, N.; Mirman, N.; Nicolas Kaufman, G.; Patterson, J. R.; Rinkevicius, A.; Ryd, A.; Skinnari, L.; Soffi, L.; Sun, W.; Tan, S. M.; Teo, W. D.; Thom, J.; Thompson, J.; Tucker, J.; Weng, Y.; Wittich, P.; Abdullin, S.; Albrow, M.; Anderson, J.; Apollinari, G.; Banerjee, S.; Bauerdick, L. A. T.; Beretvas, A.; Berryhill, J.; Bhat, P. C.; Bolla, G.; Burkett, K.; Butler, J. N.; Cheung, H. W. K.; Chlebana, F.; Cihangir, S.; Elvira, V. D.; Fisk, I.; Freeman, J.; Gottschalk, E.; Gray, L.; Green, D.; Grünendahl, S.; Gutsche, O.; Hanlon, J.; Hare, D.; Harris, R. M.; Hasegawa, S.; Hirschauer, J.; Hu, Z.; Jindariani, S.; Johnson, M.; Joshi, U.; Jung, A. W.; Klima, B.; Kreis, B.; Kwan, S.; Lammel, S.; Linacre, J.; Lincoln, D.; Lipton, R.; Liu, T.; Lopes de Sá, R.; Lykken, J.; Maeshima, K.; Marraffino, J. M.; Martinez Outschoorn, V. I.; Maruyama, S.; Mason, D.; McBride, P.; Merkel, P.; Mishra, K.; Mrenna, S.; Nahn, S.; Newman-Holmes, C.; O'Dell, V.; Pedro, K.; Prokofyev, O.; Rakness, G.; Sexton-Kennedy, E.; Soha, A.; Spalding, W. J.; Spiegel, L.; Taylor, L.; Tkaczyk, S.; Tran, N. V.; Uplegger, L.; Vaandering, E. W.; Vernieri, C.; Verzocchi, M.; Vidal, R.; Weber, H. A.; Whitbeck, A.; Yang, F.; Acosta, D.; Avery, P.; Bortignon, P.; Bourilkov, D.; Carnes, A.; Carver, M.; Curry, D.; Das, S.; di Giovanni, G. P.; Field, R. D.; Furic, I. K.; Gleyzer, S. V.; Hugon, J.; Konigsberg, J.; Korytov, A.; Low, J. F.; Ma, P.; Matchev, K.; Mei, H.; Milenovic, P.; Mitselmakher, G.; Rank, D.; Rossin, R.; Shchutska, L.; Snowball, M.; Sperka, D.; Terentyev, N.; Thomas, L.; Wang, J.; Wang, S.; Yelton, J.; Hewamanage, S.; Linn, S.; Markowitz, P.; Martinez, G.; Rodriguez, J. L.; Adams, J. R.; Ackert, A.; Adams, T.; Askew, A.; Bochenek, J.; Diamond, B.; Haas, J.; Hagopian, S.; Hagopian, V.; Johnson, K. F.; Khatiwada, A.; Prosper, H.; Weinberg, M.; Baarmand, M. M.; Bhopatkar, V.; Colafranceschi, S.; Hohlmann, M.; Kalakhety, H.; Noonan, D.; Roy, T.; Yumiceva, F.; Adams, M. R.; Apanasevich, L.; Berry, D.; Betts, R. R.; Bucinskaite, I.; Cavanaugh, R.; Evdokimov, O.; Gauthier, L.; Gerber, C. E.; Hofman, D. J.; Kurt, P.; O'Brien, C.; Sandoval Gonzalez, L. D.; Silkworth, C.; Turner, P.; Varelas, N.; Wu, Z.; Zakaria, M.; Bilki, B.; Clarida, W.; Dilsiz, K.; Durgut, S.; Gandrajula, R. P.; Haytmyradov, M.; Khristenko, V.; Merlo, J.-P.; Mermerkaya, H.; Mestvirishvili, A.; Moeller, A.; Nachtman, J.; Ogul, H.; Onel, Y.; Ozok, F.; Penzo, A.; Snyder, C.; Tiras, E.; Wetzel, J.; Yi, K.; Anderson, I.; Anderson, I.; Barnett, B. A.; Blumenfeld, B.; Eminizer, N.; Fehling, D.; Feng, L.; Gritsan, A. V.; Maksimovic, P.; Martin, C.; Osherson, M.; Roskes, J.; Sady, A.; Sarica, U.; Swartz, M.; Xiao, M.; Xin, Y.; You, C.; Xiao, M.; Baringer, P.; Bean, A.; Benelli, G.; Bruner, C.; Kenny, R. P.; Majumder, D.; Majumder, D.; Malek, M.; Murray, M.; Sanders, S.; Stringer, R.; Wang, Q.; Ivanov, A.; Kaadze, K.; Khalil, S.; Makouski, M.; Maravin, Y.; Mohammadi, A.; Saini, L. K.; Skhirtladze, N.; Toda, S.; Lange, D.; Rebassoo, F.; Wright, D.; Anelli, C.; Baden, A.; Baron, O.; Belloni, A.; Calvert, B.; Eno, S. C.; Ferraioli, C.; Gomez, J. A.; Hadley, N. J.; Jabeen, S.; Jabeen, S.; Kellogg, R. G.; Kolberg, T.; Kunkle, J.; Lu, Y.; Mignerey, A. C.; Shin, Y. H.; Skuja, A.; Tonjes, M. B.; Tonwar, S. C.; Apyan, A.; Barbieri, R.; Baty, A.; Bierwagen, K.; Brandt, S.; Bierwagen, K.; Busza, W.; Cali, I. A.; Demiragli, Z.; Di Matteo, L.; Gomez Ceballos, G.; Goncharov, M.; Gulhan, D.; Iiyama, Y.; Innocenti, G. M.; Klute, M.; Kovalskyi, D.; Lai, Y. S.; Lee, Y.-J.; Levin, A.; Luckey, P. D.; Marini, A. C.; McGinn, C.; Mironov, C.; Narayanan, S.; Niu, X.; Paus, C.; Ralph, D.; Roland, C.; Roland, G.; Salfeld-Nebgen, J.; Stephans, G. S. F.; Sumorok, K.; Varma, M.; Velicanu, D.; Veverka, J.; Wang, J.; Wang, T. W.; Wyslouch, B.; Yang, M.; Zhukova, V.; Dahmes, B.; Evans, A.; Finkel, A.; Gude, A.; Hansen, P.; Kalafut, S.; Kao, S. C.; Klapoetke, K.; Kubota, Y.; Lesko, Z.; Mans, J.; Nourbakhsh, S.; Ruckstuhl, N.; Rusack, R.; Tambe, N.; Turkewitz, J.; Acosta, J. G.; Oliveros, S.; Avdeeva, E.; Bloom, K.; Bose, S.; Claes, D. R.; Dominguez, A.; Fangmeier, C.; Gonzalez Suarez, R.; Kamalieddin, R.; Keller, J.; Knowlton, D.; Kravchenko, I.; Meier, F.; Monroy, J.; Ratnikov, F.; Siado, J. E.; Snow, G. R.; Alyari, M.; Dolen, J.; George, J.; Godshalk, A.; Harrington, C.; Iashvili, I.; Kaisen, J.; Kharchilava, A.; Kumar, A.; Rappoccio, S.; Roozbahani, B.; Alverson, G.; Barberis, E.; Baumgartel, D.; Chasco, M.; Hortiangtham, A.; Massironi, A.; Morse, D. M.; Nash, D.; Orimoto, T.; Teixeira de Lima, R.; Trocino, D.; Wang, R.-J.; Wood, D.; Zhang, J.; Hahn, K. A.; Kubik, A.; Mucia, N.; Odell, N.; Pollack, B.; Pozdnyakov, A.; Schmitt, M.; Stoynev, S.; Sung, K.; Trovato, M.; Velasco, M.; Brinkerhoff, A.; Dev, N.; Hildreth, M.; Jessop, C.; Karmgard, D. J.; Kellams, N.; Lannon, K.; Lynch, S.; Marinelli, N.; Meng, F.; Mueller, C.; Musienko, Y.; Pearson, T.; Planer, M.; Reinsvold, A.; Ruchti, R.; Smith, G.; Taroni, S.; Valls, N.; Wayne, M.; Wolf, M.; Woodard, A.; Antonelli, L.; Brinson, J.; Bylsma, B.; Durkin, L. S.; Flowers, S.; Hart, A.; Hill, C.; Hughes, R.; Ji, W.; Kotov, K.; Ling, T. Y.; Liu, B.; Luo, W.; Puigh, D.; Rodenburg, M.; Winer, B. L.; Wulsin, H. W.; Driga, O.; Elmer, P.; Hardenbrook, J.; Hebda, P.; Koay, S. A.; Lujan, P.; Marlow, D.; Medvedeva, T.; Mooney, M.; Olsen, J.; Palmer, C.; Piroué, P.; Saka, H.; Stickland, D.; Tully, C.; Zuranski, A.; Malik, S.; Barnes, V. E.; Benedetti, D.; Bortoletto, D.; Gutay, L.; Jha, M. K.; Jones, M.; Jung, K.; Miller, D. H.; Neumeister, N.; Primavera, F.; Radburn-Smith, B. C.; Shi, X.; Shipsey, I.; Silvers, D.; Sun, J.; Svyatkovskiy, A.; Wang, F.; Xie, W.; Xu, L.; Parashar, N.; Stupak, J.; Adair, A.; Akgun, B.; Chen, Z.; Ecklund, K. M.; Geurts, F. J. M.; Guilbaud, M.; Li, W.; Michlin, B.; Northup, M.; Padley, B. P.; Redjimi, R.; Roberts, J.; Rorie, J.; Tu, Z.; Zabel, J.; Betchart, B.; Bodek, A.; de Barbaro, P.; Demina, R.; Eshaq, Y.; Ferbel, T.; Galanti, M.; Galanti, M.; Garcia-Bellido, A.; Han, J.; Harel, A.; Hindrichs, O.; Hindrichs, O.; Khukhunaishvili, A.; Petrillo, G.; Tan, P.; Verzetti, M.; Arora, S.; Barker, A.; Chou, J. P.; Contreras-Campana, C.; Contreras-Campana, E.; Duggan, D.; Ferencek, D.; Gershtein, Y.; Gray, R.; Halkiadakis, E.; Hidas, D.; Hughes, E.; Kaplan, S.; Kunnawalkam Elayavalli, R.; Lath, A.; Nash, K.; Panwalkar, S.; Park, M.; Salur, S.; Schnetzer, S.; Sheffield, D.; Somalwar, S.; Stone, R.; Thomas, S.; Thomassen, P.; Walker, M.; Foerster, M.; Riley, G.; Rose, K.; Spanier, S.; York, A.; Bouhali, O.; Castaneda Hernandez, A.; Dalchenko, M.; de Mattia, M.; Delgado, A.; Dildick, S.; Dildick, S.; Eusebi, R.; Gilmore, J.; Kamon, T.; Krutelyov, V.; Krutelyov, V.; Mueller, R.; Osipenkov, I.; Pakhotin, Y.; Patel, R.; Patel, R.; Perloff, A.; Rose, A.; Safonov, A.; Tatarinov, A.; Ulmer, K. A.; Akchurin, N.; Cowden, C.; Damgov, J.; Dragoiu, C.; Dudero, P. R.; Faulkner, J.; Kunori, S.; Lamichhane, K.; Lee, S. W.; Libeiro, T.; Undleeb, S.; Volobouev, I.; Appelt, E.; Delannoy, A. G.; Greene, S.; Gurrola, A.; Janjam, R.; Johns, W.; Maguire, C.; Mao, Y.; Melo, A.; Ni, H.; Sheldon, P.; Snook, B.; Tuo, S.; Velkovska, J.; Xu, Q.; Arenton, M. W.; Cox, B.; Francis, B.; Goodell, J.; Hirosky, R.; Ledovskoy, A.; Li, H.; Lin, C.; Neu, C.; Sinthuprasith, T.; Sun, X.; Wang, Y.; Wolfe, E.; Wood, J.; Xia, F.; Clarke, C.; Harr, R.; Karchin, P. E.; Kottachchi Kankanamge Don, C.; Lamichhane, P.; Sturdy, J.; Belknap, D. A.; Carlsmith, D.; Cepeda, M.; Dasu, S.; Dodd, L.; Duric, S.; Gomber, B.; Grothe, M.; Hall-Wilton, R.; Herndon, M.; Hervé, A.; Klabbers, P.; Lanaro, A.; Levine, A.; Long, K.; Loveless, R.; Mohapatra, A.; Ojalvo, I.; Perry, T.; Pierro, G. A.; Polese, G.; Ruggles, T.; Sarangi, T.; Savin, A.; Sharma, A.; Smith, N.; Smith, W. H.; Taylor, D.; Woods, N.; Collaboration, [Authorinst]The Cms

    2016-07-01

    Jet multiplicity distributions in top quark pair ({t}{overline{t}}) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 {fb}^ {-1}. The measurement is performed in the dilepton decay channels (e^+e^-, μ^+ μ^-, and e^{±} μ^{∓}). The absolute and normalized differential cross sections for {t}overline{t} production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential {t overline{t} b} and {t overline{t} b overline{b}} cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. The data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading order calculation.

  4. Measurement of $$\\mathrm{ t \\bar{t} } $$ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $$\\sqrt{s} =$$ 8 TeV

    DOE PAGES

    Khachatryan, Vardan

    2016-07-07

    Jet multiplicity distributions in top quark pair (tt-bar) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-,μ+μ- and e±μ∓). Furthermore, the absolute and normalized differential cross sections for tt-bar production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-barb and tt-barbb-bar cross sections are presented formore » the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.« less

  5. Surface texture measurement for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  6. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... Calves § 412.47 Additional measures. (a) Each CAFO subject to this subpart must implement...

  7. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND... Calves § 412.47 Additional measures. (a) Each CAFO subject to this subpart must implement...

  8. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and Veal Calves § 412.47 Additional measures. (a) Each CAFO subject to this subpart must implement the requirements of § 412.37(a). (b) Each CAFO subject to this subpart must comply with the...

  9. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and Veal Calves § 412.47 Additional measures. (a) Each CAFO subject to this subpart must implement the requirements of § 412.37(a). (b) Each CAFO subject to this subpart must comply with the...

  10. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and Veal Calves § 412.47 Additional measures. (a) Each CAFO subject to this subpart must implement the requirements of § 412.37(a). (b) Each CAFO subject to this subpart must comply with the...

  11. SAGE II aerosol validation: selected altitude measurements, including particle micromeasurements.

    PubMed

    Oberbeck, V R; Livingston, J M; Russell, P B; Pueschel, R F; Rosen, J N; Osborn, M T; Kritz, M A; Snetsinger, K G; Ferry, G V

    1989-06-20

    Correlative aerosol measurements taken at a limited number of altitudes during coordinated field experiments are used to test the validity of particulate extinction coefficients derived from limb path solar radiance measurements taken by the Stratospheric Aerosol and Gas Experiment (SAGE) II Sun photometer. In particular, results are presented from correlative measurement missions that were conducted during January 1985, August 1985, and July 1986. Correlative sensors included impactors, laser spectrometers, and filter samplers aboard an U-2-airplane, an upward pointing lidar aboard a P-3 airplane, and balloon-borne optical particle counters (dustsondes). The main body of this paper focuses on the July 29, 1986, validation experiment, which minimized the many difficulties (e.g., spatial and temporal inhomogeneities, imperfect coincidences) that can complicate the validation process. On this day, correlative aerosol measurements taken at an altitude of 20.5 km agreed with each other within their respective uncertainties, and particulate extinction values calculated at SAGE II wavelengths from these measurements validated corresponding SAGE II values. Additional validation efforts on days when measurement and logistical conditions were much less favorable for validation are discussed in an appendix.

  12. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... water diversion devices, runoff diversion structures, and devices channelling contaminated storm water to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines, including drinking water or cooling water lines; (iii) Weekly inspections of the manure, litter, and...

  13. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... water diversion devices, runoff diversion structures, and devices channelling contaminated storm water to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines, including drinking water or cooling water lines; (iii) Weekly inspections of the manure, litter, and...

  14. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... water diversion devices, runoff diversion structures, and devices channelling contaminated storm water to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines, including drinking water or cooling water lines; (iii) Weekly inspections of the manure, litter, and...

  15. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... water diversion devices, runoff diversion structures, and devices channelling contaminated storm water to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines, including drinking water or cooling water lines; (iii) Weekly inspections of the manure, litter, and...

  16. Usefulness of additional measurements of the median nerve with ultrasonography.

    PubMed

    Claes, F; Meulstee, J; Claessen-Oude Luttikhuis, T T M; Huygen, P L M; Verhagen, W I M

    2010-12-01

    High resolution sonography is a relatively new diagnostic technique in diagnosing carpal tunnel syndrome (CTS). Normal values in different studies, however, vary and this makes their practical use difficult. The aim of this study was to establish normal values for the median nerve cross-sectional area (CSA) and to investigate the value of measuring additional parameters. Ninety-eight wrists of 29 women and 25 men without signs or symptoms of CTS were included. Width and circumference of the wrist were measured. The CSA of the median nerve at the level of the pisiform bone was measured using ultrasonography. We found a significant correlation between the CSA of the median nerve at the wrist and wrist circumference. Measuring wrist circumference will establish the upper level of normal more accurately compared to predictions solely based upon gender. This has important implications in diagnosing CTS with ultrasonography. PMID:20429021

  17. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  18. Measurement of Visceral Fat: Should We Include Retroperitoneal Fat?

    PubMed Central

    Yang, Chung-Yi; Hsieh, Hung-Ren; Ma, Wen-Ya; Lin, Mao-Shin; Liu, Pi-Hua; Shih, Shyang-Rong; Liou, Jyh-Ming; Chuang, Lee-Ming; Chen, Ming-Fong; Lin, Jou-Wei; Wei, Jung-Nan; Li, Hung-Yuan

    2014-01-01

    Objective Whether retroperitoneal fat should be included in the measurement of visceral fat remains controversial. We compared the relationships of fat areas in peritoneal, retroperitoneal, and subcutaneous compartments to metabolic syndrome, adipokines, and incident hypertension and diabetes. Methods We enrolled 432 adult participants (153 men and 279 women) in a community-based cohort study. Computed tomography at the umbilicus level was used to measure the fat areas. Results Retroperitoneal fat correlated significantly with metabolic syndrome (adjusted odds ratio (OR), 5.651, p<0.05) and the number of metabolic abnormalities (p<0.05). Retroperitoneal fat area was significantly associated with blood pressure, plasma glycemic indices, lipid profile, C-reactive protein, adiponectin (r = −0.244, P<0.05), and leptin (r = 0.323, p<0.05), but not plasma renin or aldosterone concentrations. During the 2.94±0.84 years of follow-up, 32 participants developed incident hypertension. Retroperitoneal fat area (hazard ration (HR) 1.62, p = 0.003) and peritoneal fat area (HR 1.62, p = 0.009), but not subcutaneous fat area (p = 0.14) were associated with incident hypertension. Neither retroperitoneal fat area, peritoneal fat area, nor subcutaneous fat areas was associated with incident diabetes after adjustment. Conclusions Retroperitoneal fat is similar to peritoneal fat, but differs from subcutaneous fat, in terms of its relationship with metabolic syndrome and incident hypertension. Retroperitoneal fat area should be included in the measurement of visceral fat for cardio-metabolic studies in human. PMID:25401949

  19. SAGE II aerosol validation - Selected altitude measurements, including particle micromeasurements

    NASA Technical Reports Server (NTRS)

    Oberbeck, Verne R.; Russell, Philip B.; Pueschel, Rudolf F.; Snetsinger, Kenneth G.; Ferry, Guy V.; Livingston, John M.; Rosen, James N.; Osborn, Mary T.; Kritz, Mark A.

    1989-01-01

    The validity of particulate extinction coefficients derived from limb path solar radiance measurements obtained during the Stratospheric Aerosol and Gas Experiment (SAGE) II is tested. The SAGE II measurements are compared with correlative aerosol measurements taken during January 1985, August 1985, and July 1986 with impactors, laser spectrometers, and filter samplers on a U-2 aircraft, an upward pointing lidar on a P-3 aircraft, and balloon-borne optical particle counters. The data for July 29, 1986 are discussed in detail. The aerosol measurements taken on this day at an altitude of 20.5 km produce particulate extinction values which validate the SAGE II values for similar wavelengths.

  20. Additional records of metazoan parasites from Caribbean marine mammals, including genetically identified anisakid nematodes.

    PubMed

    Colón-Llavina, Marlene M; Mignucci-Giannoni, Antonio A; Mattiucci, Simonetta; Paoletti, Michela; Nascetti, Giuseppe; Williams, Ernest H

    2009-10-01

    Studies of marine mammal parasites in the Caribbean are scarce. An assessment for marine mammal endo- and ectoparasites from Puerto Rico and the Virgin Islands, but extending to other areas of the Caribbean, was conducted between 1989 and 1994. The present study complements the latter and enhances identification of anisakid nematodes using molecular markers. Parasites were collected from 59 carcasses of stranded cetaceans and manatees from 1994 to 2006, including Globicephala macrorhynchus, Kogia breviceps, Kogia sima, Lagenodelphis hosei, Mesoplodon densirostris, Peponocephala electra, Stenella longirostris, Steno bredanensis, Trichechus manatus. Tursiops truncatus, and Ziphius cavirostris. Sixteen species of endoparasitic helminthes were morphologically identified, including two species of acanthocephalans (Bolbosoma capitatum, Bolbosoma vasculosum), nine species of nematodes (Anisakis sp., Anisakis brevispiculata, Anisakis paggiae, Anisakis simplex, Anisakis typica, Anisakis ziphidarium, Crassicauda anthonyi, Heterocheilus tunicatus, Pseudoterranova ceticola), two species of cestodes (Monorygma grimaldi, Phyllobothrium delphini), and three species of trematodes (Chiorchis groschafti, Pulmonicola cochleotrema, Monoligerum blairi). The nematodes belonging to the genus Anisakis recovered in some stranded animals were genetically identified to species level based on their sequence analysis of mitochondrial DNA (629 bp of mtDNA cox 2). A total of five new host records and six new geographic records are presented. PMID:19582477

  1. Additional records of metazoan parasites from Caribbean marine mammals, including genetically identified anisakid nematodes.

    PubMed

    Colón-Llavina, Marlene M; Mignucci-Giannoni, Antonio A; Mattiucci, Simonetta; Paoletti, Michela; Nascetti, Giuseppe; Williams, Ernest H

    2009-10-01

    Studies of marine mammal parasites in the Caribbean are scarce. An assessment for marine mammal endo- and ectoparasites from Puerto Rico and the Virgin Islands, but extending to other areas of the Caribbean, was conducted between 1989 and 1994. The present study complements the latter and enhances identification of anisakid nematodes using molecular markers. Parasites were collected from 59 carcasses of stranded cetaceans and manatees from 1994 to 2006, including Globicephala macrorhynchus, Kogia breviceps, Kogia sima, Lagenodelphis hosei, Mesoplodon densirostris, Peponocephala electra, Stenella longirostris, Steno bredanensis, Trichechus manatus. Tursiops truncatus, and Ziphius cavirostris. Sixteen species of endoparasitic helminthes were morphologically identified, including two species of acanthocephalans (Bolbosoma capitatum, Bolbosoma vasculosum), nine species of nematodes (Anisakis sp., Anisakis brevispiculata, Anisakis paggiae, Anisakis simplex, Anisakis typica, Anisakis ziphidarium, Crassicauda anthonyi, Heterocheilus tunicatus, Pseudoterranova ceticola), two species of cestodes (Monorygma grimaldi, Phyllobothrium delphini), and three species of trematodes (Chiorchis groschafti, Pulmonicola cochleotrema, Monoligerum blairi). The nematodes belonging to the genus Anisakis recovered in some stranded animals were genetically identified to species level based on their sequence analysis of mitochondrial DNA (629 bp of mtDNA cox 2). A total of five new host records and six new geographic records are presented.

  2. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Petitions to amend 40 CFR part 273 to include additional hazardous wastes. 260.23 Section 260.23 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  3. 78 FR 67369 - National Vaccine Injury Compensation Program: Addition to the Vaccine Injury Table to Include All...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... the category for new vaccines on the Table. See 70 FR 19092. Subsequently, the Secretary engaged in...). See 76 FR 36367. Since that time, quadrivalent influenza vaccines (meaning that they contain four...: Addition to the Vaccine Injury Table to Include All Vaccines Against Seasonal Influenza AGENCY:...

  4. 77 FR 1073 - Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-09

    ... HUMAN SERVICES Food and Drug Administration Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses to an Existing System of Records; Bioresearch Monitoring Information System AGENCY: Food and Drug Administration, HHS. ACTION: Notice of an altered system of records....

  5. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control.

    PubMed

    Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

    2014-01-01

    Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented.

  6. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control.

    PubMed

    Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

    2014-01-01

    Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented. PMID:26601041

  7. Modeling Errors in Daily Precipitation Measurements: Additive or Multiplicative?

    NASA Technical Reports Server (NTRS)

    Tian, Yudong; Huffman, George J.; Adler, Robert F.; Tang, Ling; Sapiano, Matthew; Maggioni, Viviana; Wu, Huan

    2013-01-01

    The definition and quantification of uncertainty depend on the error model used. For uncertainties in precipitation measurements, two types of error models have been widely adopted: the additive error model and the multiplicative error model. This leads to incompatible specifications of uncertainties and impedes intercomparison and application.In this letter, we assess the suitability of both models for satellite-based daily precipitation measurements in an effort to clarify the uncertainty representation. Three criteria were employed to evaluate the applicability of either model: (1) better separation of the systematic and random errors; (2) applicability to the large range of variability in daily precipitation; and (3) better predictive skills. It is found that the multiplicative error model is a much better choice under all three criteria. It extracted the systematic errors more cleanly, was more consistent with the large variability of precipitation measurements, and produced superior predictions of the error characteristics. The additive error model had several weaknesses, such as non constant variance resulting from systematic errors leaking into random errors, and the lack of prediction capability. Therefore, the multiplicative error model is a better choice.

  8. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control

    PubMed Central

    Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

    2014-01-01

    Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part’s porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented. PMID:26601041

  9. Cleaning and Cleanliness Measurement of Additive Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Welker, Roger W.; Mitchell, Mark A.

    2015-01-01

    The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surface of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The six commonly used methods for establishing objective cleanliness acceptance limits will be discussed. Special emphasis shall focus on the use of multiple extraction, a technique that has been demonstrated for additively manufactured parts.

  10. Teaching Introductory Measurement: Suggestions for What to Include and How to Motivate Students

    ERIC Educational Resources Information Center

    Bandalos, Deborah L.; Kopp, Jason P.

    2012-01-01

    In this article, we discuss the importance of measurement literacy and some issues encountered in teaching introductory measurement courses. We present results from a survey of introductory measurement instructors, including information about the topics included in such courses and the amount of time spent on each. Topics that were included by the…

  11. A simple procedure to include a free-form measurement capability to standard coordinate measurement machines

    NASA Astrophysics Data System (ADS)

    Schneider, Florian; Rascher, Rolf; Stamp, Richard; Smith, Gordon

    2013-09-01

    The modern optical industry requires objects with complex topographical structures. Free-form shaped objects are of large interest in many branches, especially for size reduced, modern lifestyle products like digital cameras. State of the art multi-axes-coordinate measurement machines (CMM), like the topographical measurement machine TII-3D, are by principle suitable to measure free-form shaped objects. The only limitation is the software package. This paper may illustrate a simple way to enhance coordinate measurement machines in order to add a free-form function. Next to a coordinate measurement machine, only a state of the art CAD† system and a simple piece of software are necessary. For this paper, the CAD software CREO‡ had been used. CREO enables the user to develop a 3D object in two different ways. With the first method, the user might design the shape by drawing one or more 2D sketches and put an envelope around. Using the second method, the user could define one or more formulas in the editor to describe the favoured surface. Both procedures lead to the required three-dimensional shape. However, further features of CREO enable the user to export the XYZ-coordinates of the created surface. A special designed software tool, developed with Matlab§, converts the XYZ-file into a measurement matrix which can be used as a reference file. Finally the result of the free-form measurement, carried out with a CMM, has to be loaded into the software tool and both files will be computed. The result is an error profile which provides the deviation between the measurement and the target-geometry.

  12. Simple Additivity of Stochastic Psychological Processes: Tests and Measures.

    ERIC Educational Resources Information Center

    Balakrishnan, J. D.

    1994-01-01

    Methods of testing relatively complete (distributional) models of internal psychological processes are described. It is shown that there is a sufficient condition for additive models to imply this property of the likelihood ratio. Also discussed are the examination of hazard rate functions of component processes and change in cumulative…

  13. Additional studies for the spectrophotometric measurement of iodine in water

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Previous work in iodine spectroscopy is briefly reviewed. Continued studies of the direct spectrophotometric determination of aqueous iodine complexed with potassium iodide show that free iodine is optimally determined at the isosbestic point for these solutions. The effects on iodine determinations of turbidity and chemical substances (in trace amounts) is discussed and illustrated. At the levels tested, iodine measurements are not significantly altered by such substances. A preliminary design for an on-line, automated iodine monitor with eventual capability of operating also as a controller was analyzed and developed in detail with respect single beam colorimeter operating at two wavelengths (using a rotating filter wheel). A flow-through sample cell allows the instrument to operate continuously, except for momentary stop flow when measurements are made. The timed automatic cycling of the system may be interrupted whenever desired, for manual operation. An analog output signal permits controlling an iodine generator.

  14. Major histocompatibility complex harbors widespread genotypic variability of non-additive risk of rheumatoid arthritis including epistasis

    PubMed Central

    Wei, Wen-Hua; Bowes, John; Plant, Darren; Viatte, Sebastien; Yarwood, Annie; Massey, Jonathan; Worthington, Jane; Eyre, Stephen

    2016-01-01

    Genotypic variability based genome-wide association studies (vGWASs) can identify potentially interacting loci without prior knowledge of the interacting factors. We report a two-stage approach to make vGWAS applicable to diseases: firstly using a mixed model approach to partition dichotomous phenotypes into additive risk and non-additive environmental residuals on the liability scale and secondly using the Levene’s (Brown-Forsythe) test to assess equality of the residual variances across genotype groups per marker. We found widespread significant (P < 2.5e-05) vGWAS signals within the major histocompatibility complex (MHC) across all three study cohorts of rheumatoid arthritis. We further identified 10 epistatic interactions between the vGWAS signals independent of the MHC additive effects, each with a weak effect but jointly explained 1.9% of phenotypic variance. PTPN22 was also identified in the discovery cohort but replicated in only one independent cohort. Combining the three cohorts boosted power of vGWAS and additionally identified TYK2 and ANKRD55. Both PTPN22 and TYK2 had evidence of interactions reported elsewhere. We conclude that vGWAS can help discover interacting loci for complex diseases but require large samples to find additional signals. PMID:27109064

  15. 45 CFR 2522.570 - What information on performance measures must my grant application include?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false What information on performance measures must my grant application include? 2522.570 Section 2522.570 Public Welfare Regulations Relating to Public... information on performance measures must my grant application include? You must submit all of the following...

  16. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  17. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  18. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  19. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  20. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  1. 45 CFR 2522.570 - What information on performance measures must my grant application include?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... APPLICANTS Evaluation Requirements Performance Measures: Requirements and Procedures § 2522.570 What information on performance measures must my grant application include? You must submit all of the following as... 45 Public Welfare 4 2010-10-01 2010-10-01 false What information on performance measures must...

  2. Cleaning and Cleanliness Measurement of Additive Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark A.; Raley, Randy

    2016-01-01

    The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surfaces of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The methods for establishing objective cleanliness acceptance limits will be discussed.

  3. Prenatal Triclosan Exposure and Anthropometric Measures Including Anogenital Distance in Danish Infants

    PubMed Central

    Lassen, Tina Harmer; Frederiksen, Hanne; Kyhl, Henriette Boye; Swan, Shanna H.; Main, Katharina M.; Andersson, Anna-Maria; Lind, Dorte Vesterholm; Husby, Steffen; Wohlfahrt-Veje, Christine; Skakkebæk, Niels E.; Jensen, Tina Kold

    2016-01-01

    Background: Triclosan (TCS) is widely used as an antibacterial agent in consumer products such as hand soap and toothpaste, and human exposure is widespread. TCS is suspected of having endocrine-disrupting properties, but few human studies have examined the developmental effects of prenatal TCS exposure. Objectives: We prospectively examined associations between prenatal TCS exposure and anthropometric measures at birth and anogenital distance (AGD) at 3 months of age. Methods: Pregnant women from the Odense Child Cohort (n = 514) provided urine samples at approximately gestational week 28 (median 28.7 weeks, range 26.4–34.0), and urinary TCS concentration was measured by isotope dilution TurboFlow–liquid chromatography–tandem mass spectrometry. Multiple linear regression analysis was used to examine associations between prenatal TCS exposure and measures of size at birth (birth weight, length, head and abdominal circumference) and AGD at 3 months of age (median 3.3 months, range 2.3–6.7 months), controlling for potential confounders. Results: Newborn boys in the highest quartile of prenatal TCS exposure had a 0.7-cm [95% confidence interval (CI): –1.2, –0.1, p = 0.01] smaller head circumference than boys in the lowest quartile. Additionally in boys, inverse associations of borderline statistical significance were observed between prenatal TCS exposure and abdominal circumference at birth and AGD at 3 months of age (p-values < 0.10). Prenatal TCS exposure was not significantly associated with any of the outcomes in girls. However, AGD was measured in fewer girls, and we observed no significant interactions between a child’s sex and prenatal TCS exposure in anthropometric measures at birth. Conclusion: Prenatal TCS exposure was associated with reduced head and abdominal circumference at birth and with reduced AGD at 3 months of age in boys, although the last two findings were statistically nonsignificant. These findings require replication but are

  4. Force measuring valve assemblies, systems including such valve assemblies and related methods

    DOEpatents

    DeWall, Kevin George; Garcia, Humberto Enrique; McKellar, Michael George

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  5. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  6. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  7. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  8. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  9. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  10. 21 CFR 870.1025 - Arrhythmia detector and alarm (including ST-segment measurement and alarm).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Arrhythmia detector and alarm (including ST... Diagnostic Devices § 870.1025 Arrhythmia detector and alarm (including ST-segment measurement and alarm). (a) Identification. The arrhythmia detector and alarm device monitors an electrocardiogram and is designed to...

  11. 21 CFR 870.1025 - Arrhythmia detector and alarm (including ST-segment measurement and alarm).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Arrhythmia detector and alarm (including ST... Diagnostic Devices § 870.1025 Arrhythmia detector and alarm (including ST-segment measurement and alarm). (a) Identification. The arrhythmia detector and alarm device monitors an electrocardiogram and is designed to...

  12. 21 CFR 870.1025 - Arrhythmia detector and alarm (including ST-segment measurement and alarm).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Arrhythmia detector and alarm (including ST... Diagnostic Devices § 870.1025 Arrhythmia detector and alarm (including ST-segment measurement and alarm). (a) Identification. The arrhythmia detector and alarm device monitors an electrocardiogram and is designed to...

  13. 21 CFR 870.1025 - Arrhythmia detector and alarm (including ST-segment measurement and alarm).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Arrhythmia detector and alarm (including ST... Diagnostic Devices § 870.1025 Arrhythmia detector and alarm (including ST-segment measurement and alarm). (a) Identification. The arrhythmia detector and alarm device monitors an electrocardiogram and is designed to...

  14. 21 CFR 870.1025 - Arrhythmia detector and alarm (including ST-segment measurement and alarm).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Arrhythmia detector and alarm (including ST... Diagnostic Devices § 870.1025 Arrhythmia detector and alarm (including ST-segment measurement and alarm). (a) Identification. The arrhythmia detector and alarm device monitors an electrocardiogram and is designed to...

  15. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    During the summer and fall of 1977, 533 water and 1226 sediment samples were collected from 1740 locations within the 18,000 km/sup 2/ area of the Newcastle quadrangle, Wyoming. Water samples were collected from wells and springs; sediment samples were collected from stream channels and from springs. Each water sample was analyzed for uranium, and each sediment sample was analyzed for 43 elements, including uranium and thorium. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations (>20 ppB) generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District.

  16. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  17. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  18. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS Quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    Water and sediment samples were collected and each water sample was analyzed for U, and each sediment sample was analyzed for 43 elements, including U and Th. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District. Uranium concentrations in sediment samples range from 1.14 to 220.70 ppM and have a median of 3.37 ppM and a mean of 4.03 ppM. Throughout the major uranium mining districts of the Powder River Basin, sediment samples with high uranium concentrations were collected from dry streams located near wells producing water samples with high uranium concentrations. High uranium concentrations were also found associated with the Lance Creek oil field where uranium mineralization is known in the White River formation. High uranium concentrations were also found in sediment samples in areas where uranium mineralization is not known. These samples are from dry streams in areas underlain by the White River formation, the Niobrara formation, and the Pierre, Carlisle, Belle Fourche, and Mowry shales.

  19. Atmospheric Radiation Measurement (ARM) Value-Added Data Products (Including Evaluated Data Sets)

    DOE Data Explorer

    Many of the scientific needs of the ARM Program are met through the analysis and processing of existing data products into "value-added" products or VAPs. Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are either impractical or impossible to measure directly or routinely. Physical models using ARM instrument data as inputs are implemented as VAPs and can help fill some of the unmet measurement needs of the Program. Conversely, ARM produces some VAPs not in order to fill unmet measurement needs, but instead to improve the quality of existing measurements. In addition, when more than one measurement is available, ARM also produces "best estimate" VAPs. A special class of VAP called a Quality Measurement Experiment (QME) adds value to the input data streams by providing for continuous assessment of the quality of the input data. [taken from http://www.arm.gov/data/vaps_all.php] One of the ARM data centers, the External Data Center or XDC at Brookhaven National Laboratory, also adds value to ARM information by identifying sources and acquiring external data to augment the data being generated within the program. These external data sets are converted, processed, and carefully evaluated for their value to the overall ARM program. /. Data Plots are also value-added products from ARM.

  20. Judging the fitness of on-site measurements by their uncertainty, including the contribution from sampling.

    PubMed

    Boon, Katy A; Ramsey, Michael H

    2012-03-01

    Chemical measurements made on-site can be very effective in underpinning environmental decisions, but they are often mistrusted in favour of measurements made on samples removed off-site to a remote, usually accredited, laboratory. The uncertainty present in all measurements, wherever they are made, includes contributions from the sampling and sample preparation processes, and also from often unsuspected systematic errors. Once this total uncertainty has been estimated in a rigorous way under statistical control for each investigation, it is demonstrated using two case studies that on-site measurements can be fit for decision-making purposes. Uncertainty from sampling and sample preparation often dominates many measurement systems, whether they are based on-site or off-site, and makes the analytical contribution less critical for judging fitness. The value of this total uncertainty can be used to make a probabilistic, rather than deterministic, classification of the contamination. Uncertainty values can also be used to calculate how the measurement method can be modified to achieve an optimal value that it fit-for-purpose (e.g. using composite samples or measurements). The rapid availability of on-site measurements, together with known uncertainty, is shown to be capable of enabling equal reliability of decisions to the off-site approach, whilst minimising the cost of the decision making process. Challenges in estimating the uncertainty of on-site measurements are identified as (i) potential ambiguity in the true value that is being estimated (i.e. the measurand), and (ii) the fact that off-site lab measurements can have values of analytical precision that are larger than those quoted by the lab (e.g. 54% rather than 30% for TPH, at 95% confidence) and which make their use in the validation of on-site measurements problematic.

  1. Gleason-Type Theorem for Projective Measurements, Including Qubits: The Born Rule Beyond Quantum Physics

    NASA Astrophysics Data System (ADS)

    De Zela, F.

    2016-10-01

    Born's quantum probability rule is traditionally included among the quantum postulates as being given by the squared amplitude projection of a measured state over a prepared state, or else as a trace formula for density operators. Both Gleason's theorem and Busch's theorem derive the quantum probability rule starting from very general assumptions about probability measures. Remarkably, Gleason's theorem holds only under the physically unsound restriction that the dimension of the underlying Hilbert space {H} must be larger than two. Busch's theorem lifted this restriction, thereby including qubits in its domain of validity. However, while Gleason assumed that observables are given by complete sets of orthogonal projectors, Busch made the mathematically stronger assumption that observables are given by positive operator-valued measures. The theorem we present here applies, similarly to the quantum postulate, without restricting the dimension of {H} and for observables given by complete sets of orthogonal projectors. We also show that the Born rule applies beyond the quantum domain, thereby exhibiting the common root shared by some quantum and classical phenomena.

  2. Precise Measurements of the Cosmic Ray Antiproton Spectrum with BESS Including the Effects of Solar Modulation

    NASA Technical Reports Server (NTRS)

    Mitchell, J. W.; Abe, K.; Anraku, K.; Asaoka, Y.; Fujikawa, M.; Fuke, H.; Haino, S.; Hams, T.; Ikeda, N.; Imori, M.

    2002-01-01

    The Balloon Borne Experiment with a Superconducting Spectrometer (BESS) has measured the energy spectrum of cosmic-ray antiprotons between 0.18 and 4.20 GeV in eight flights between 1993 and 2002. Above about 1 GeV, models in which antiprotons are secondary products of the interactions of primary cosmic rays with the interstellar gas agree with the BESS antiproton spectrum. Below 1 GeV, the data show a possible excess antiproton flux compared to secondary model predictions, suggesting the presence of an additional source of antiprotons. The antiproton/proton ratios measured between 1993 and 1999, during the Sun's positive-polarity phase, are consistent with simple models of solar modulation. However, results from the 2000 flight, following the solar magnetic field reversal, show a sudden increase in the antiproton/proton ratio and tend to favor a charge-sign-dependent drift model. To extend BESS measurements to lower energies, an evolutionary instrument, BESS-Polar, is under construction for polar flight in 2004.

  3. Flight-measured laminar boundary-layer transition phenomena including stability theory analysis

    NASA Technical Reports Server (NTRS)

    Obara, C. J.; Holmes, B. J.

    1985-01-01

    Flight experiments were conducted on a single-engine turboprop aircraft fitted with a 92-in-chord, 3-ft-span natural laminar flow glove at glove section lift coefficients from 0.15 to 1.10. The boundary-layer transition measurement methods used included sublimating chemicals and surface hot-film sensors. Transition occurred downstream of the minimum pressure point. Hot-film sensors provided a well-defined indication of laminar, laminar-separation, transitional, and turbulent boundary layers. Theoretical calculations of the boundary-layer parameters provided close agreement between the predicted laminar-separation point and the measured transition location. Tollmien-Schlichting (T-S) wave growth n-factors between 15 and 17 were calculated at the predicted point of laminar separation. These results suggest that for many practical airplane cruise conditions, laminar separation (as opposed to T-S instability) is the major cause of transition in predominantly two-dimensional flows.

  4. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 4 2014-07-01 2014-07-01 false If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... is assessed by the HHG carrier (e.g., boat, trailer, ultralight vehicle), am I responsible...

  5. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 4 2012-07-01 2012-07-01 false If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... Management Federal Travel Regulation System RELOCATION ALLOWANCES TRANSPORTATION AND STORAGE OF PROPERTY...

  6. 41 CFR 302-7.21 - If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 4 2013-07-01 2012-07-01 true If my HHG shipment includes an item for which a weight additive is assessed by the HHG carrier (e.g., boat, trailer... Management Federal Travel Regulation System RELOCATION ALLOWANCES TRANSPORTATION AND STORAGE OF PROPERTY...

  7. Validity of a questionnaire measuring motives for choosing foods including sustainable concerns.

    PubMed

    Sautron, Valérie; Péneau, Sandrine; Camilleri, Géraldine M; Muller, Laurent; Ruffieux, Bernard; Hercberg, Serge; Méjean, Caroline

    2015-04-01

    Since the 1990s, sustainability of diet has become an increasingly important concern for consumers. However, there is no validated multidimensional measurement of motivation in the choice of foods including a concern for sustainability currently available. In the present study, we developed a questionnaire that measures food choice motives during purchasing, and we tested its psychometric properties. The questionnaire included 104 items divided into four predefined dimensions (environmental, health and well-being, economic and miscellaneous). It was administered to 1000 randomly selected subjects participating in the Nutrinet-Santé cohort study. Among 637 responders, one-third found the questionnaire complex or too long, while one-quarter found it difficult to fill in. Its underlying structure was determined by exploratory factor analysis and then internally validated by confirmatory factor analysis. Reliability was also assessed by internal consistency of selected dimensions and test-retest repeatability. After selecting the most relevant items, first-order analysis highlighted nine main dimensions: labeled ethics and environment, local and traditional production, taste, price, environmental limitations, health, convenience, innovation and absence of contaminants. The model demonstrated excellent internal validity (adjusted goodness of fit index = 0.97; standardized root mean square residuals = 0.07) and satisfactory reliability (internal consistency = 0.96, test-retest repeatability coefficient ranged between 0.31 and 0.68 over a mean 4-week period). This study enabled precise identification of the various dimensions in food choice motives and proposed an original, internally valid tool applicable to large populations for assessing consumer food motivation during purchasing, particularly in terms of sustainability.

  8. Longitudinal and transversal bioimpedance measurements in addition to diagnosis of heart failure

    NASA Astrophysics Data System (ADS)

    Ribas, N.; Nescolarde, L.; Domingo, M.; Gastelurrutia, P.; Bayés-Genis, A.; Rosell-Ferrer, J.

    2010-04-01

    Heart Failure (HF) is a clinical syndrome characterised by signs of systemic and pulmonary fluid retention, shortness of breath and/or fatigue. There is a lack of reliable indicators of disease state. Benefits and applicability of non-invasive bioimpedance measurement in the hydration state of soft tissues have been validated, fundamentally, in dialysis patients. Four impedance configurations (2 longitudinal and 2 transversal) were analyzed in 48 HF patients (M=28, F=20) classified according to a clinical disease severity score (CDSS) derived from the Framingham criteria: CDSS<=2 (G1: M = 23, F = 14) and CDSS>2 (G2: M = 5, F = 6). The aim of this study is to analyze longitudinal and transversal bioimpedance measurement at 50 kHz, in addition to clinical diagnosis parameters of heart failure, including: clinical disease severity score (CDSS) and a biomarker concentrations (NT-proBNP). The Kolmogorov-Smirnov test was used for the normality test of all variables. The CDSS, NTproBNP and impedance parameters between groups (G1 and G2) were compared by mean of Mann Withney U-test. The statistical significance was considered with P < 0.05. Whole-body impedance measured was analyzed using RXc graph.

  9. Multiple tail models including inverse measures for structural design under uncertainties

    NASA Astrophysics Data System (ADS)

    Ramu, Palaniappan

    Sampling-based reliability estimation with expensive computer models may be computationally prohibitive due to a large number of required simulations. One way to alleviate the computational expense is to extrapolate reliability estimates from observed levels to unobserved levels. Classical tail modeling techniques provide a class of models to enable this extrapolation using asymptotic theory by approximating the tail region of the cumulative distribution function (CDF). This work proposes three alternate tail extrapolation techniques including inverse measures that can complement classical tail modeling. The proposed approach, multiple tail models, applies the two classical and three alternate extrapolation techniques simultaneously to estimate inverse measures at the extrapolation regions and use the median as the best estimate. It is observed that the range of the five estimates can be used as a good approximation of the error associated with the median estimate. Accuracy and computational efficiency are competing factors in selecting sample size. Yet, as our numerical studies reveal, the accuracy lost to the reduction of computational power is very small in the proposed method. The method is demonstrated on standard statistical distributions and complex engineering examples.

  10. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna.

    PubMed

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J

    2016-01-01

    The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909-1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare. PMID:27667947

  11. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna.

    PubMed

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J

    2016-01-01

    The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909-1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare.

  12. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna

    PubMed Central

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J.

    2016-01-01

    Abstract The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909–1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare. PMID:27667947

  13. Tardigrada of Ireland: a review of records and an updated checklist of species including a new addition to the Irish fauna

    PubMed Central

    DeMilio, Erica; Lawton, Colin; Marley, Nigel J.

    2016-01-01

    Abstract The phylum Tardigrada was not recorded in Ireland until the Clare Island Survey of 1909–1911, with only rare subsequent reports on Irish tardigrade species. In recent decades, significant taxonomic revision has occurred within Tardigrada. This has resulted in the need for a review of all known historical records from Ireland and Northern Ireland in order to produce an updated checklist of valid taxa. The new checklist includes fifty-one tardigrade species and subspecies including a new addition to the Irish fauna reported herein, Echiniscus quadrispinosus quadrispinosus Richters, 1902 from Newtown, Ballyvaughan, Co. Clare.

  14. Power Calculations for General Linear Multivariate Models Including Repeated Measures Applications.

    PubMed

    Muller, Keith E; Lavange, Lisa M; Ramey, Sharon Landesman; Ramey, Craig T

    1992-12-01

    Recently developed methods for power analysis expand the options available for study design. We demonstrate how easily the methods can be applied by (1) reviewing their formulation and (2) describing their application in the preparation of a particular grant proposal. The focus is a complex but ubiquitous setting: repeated measures in a longitudinal study. Describing the development of the research proposal allows demonstrating the steps needed to conduct an effective power analysis. Discussion of the example also highlights issues that typically must be considered in designing a study. First, we discuss the motivation for using detailed power calculations, focusing on multivariate methods in particular. Second, we survey available methods for the general linear multivariate model (GLMM) with Gaussian errors and recommend those based on F approximations. The treatment includes coverage of the multivariate and univariate approaches to repeated measures, MANOVA, ANOVA, multivariate regression, and univariate regression. Third, we describe the design of the power analysis for the example, a longitudinal study of a child's intellectual performance as a function of mother's estimated verbal intelligence. Fourth, we present the results of the power calculations. Fifth, we evaluate the tradeoffs in using reduced designs and tests to simplify power calculations. Finally, we discuss the benefits and costs of power analysis in the practice of statistics. We make three recommendations: Align the design and hypothesis of the power analysis with the planned data analysis, as best as practical.Embed any power analysis in a defensible sensitivity analysis.Have the extent of the power analysis reflect the ethical, scientific, and monetary costs. We conclude that power analysis catalyzes the interaction of statisticians and subject matter specialists. Using the recent advances for power analysis in linear models can further invigorate the interaction. PMID:24790282

  15. Calibration-free absolute frequency response measurement of directly modulated lasers based on additional modulation.

    PubMed

    Zhang, Shangjian; Zou, Xinhai; Wang, Heng; Zhang, Yali; Lu, Rongguo; Liu, Yong

    2015-10-15

    A calibration-free electrical method is proposed for measuring the absolute frequency response of directly modulated semiconductor lasers based on additional modulation. The method achieves the electrical domain measurement of the modulation index of directly modulated lasers without the need for correcting the responsivity fluctuation in the photodetection. Moreover, it doubles measuring frequency range by setting a specific frequency relationship between the direct and additional modulation. Both the absolute and relative frequency response of semiconductor lasers are experimentally measured from the electrical spectrum of the twice-modulated optical signal, and the measured results are compared to those obtained with conventional methods to check the consistency. The proposed method provides calibration-free and accurate measurement for high-speed semiconductor lasers with high-resolution electrical spectrum analysis.

  16. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    USGS Publications Warehouse

    Hall, R.O.; Tank, J.L.; Sobota, D.J.; Mulholland, P.J.; O'Brien, J. M.; Dodds, W.K.; Webster, J.R.; Valett, H.M.; Poole, G.C.; Peterson, B.J.; Meyer, J.L.; McDowell, W.H.; Johnson, S.L.; Hamilton, S.K.; Grimm, N. B.; Gregory, S.V.; Dahm, Clifford N.; Cooper, L.W.; Ashkenas, L.R.; Thomas, S.M.; Sheibley, R.W.; Potter, J.D.; Niederlehner, B.R.; Johnson, L.T.; Helton, A.M.; Crenshaw, C.M.; Burgin, A.J.; Bernot, M.J.; Beaulieu, J.J.; Arangob, C.P.

    2009-01-01

    We measured uptake length of 15NO-3 in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO-3 uptake length. As part of the Lotic Intersite Nitrogen eXperiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO-3 concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO-3 uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S Wtot). Uptake length increased with specific discharge (Q/w) and increasing NO-3 concentrations, showing a loss in removal efficiency in streams with high NO-3 concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO-3 removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO-3 uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO-3 uptake lengths via directly increasing both gross primary production and NO-3 concentration. Gross primary production shortened SWtot, while increasing NO-3 lengthened SWtot resulting in no net effect of land use on NO- 3 removal. ?? 2009.

  17. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Tank, Jennifer; Sobota, Daniel; O'Brien, Jon; Webster, Jackson; Valett, H. Maurice; Dodds, Walter; Poole, Geoff; Peterson, Chris G.; Meyer, Judy; McDowell, William; Johnson, Sherri; Hamilton, Stephen; Gregory, Stanley; Grimm, Nancy; Dahm, Cliff; Cooper, Lee W; Ashkenas, Linda; Thomas, Suzanne; Sheibley, Rich; Potter, Jody; Niederlehner, Bobbie; Johnson, Laura; Helton, Ashley; Crenshaw, Chelsea; Burgin, Amy; Bernot, Melody; Beaulieu, Jake; Arango, Clay

    2009-01-01

    We measured uptake length of {sup 15}NO{sub 3}{sup -} in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO{sub 3}{sup -} uptake length. As part of the Lotic Intersite Nitrogen Experiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO{sub 3}{sup -} concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO{sub 3}{sup -} uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S{sub Wtot}). Uptake length increased with specific discharge (Q/w) and increasing NO{sub 3}{sup -} concentrations, showing a loss in removal efficiency in streams with high NO{sub 3}{sup -} concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO{sub 3}{sup -} removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO{sub 3}{sup -} uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO{sub 3}{sup -} uptake lengths via directly increasing both gross primary production and NO{sub 3}{sup -} concentration. Gross primary production shortened S{sub Wtot}, while increasing NO{sub 3}{sup -} lengthened S{sub Wtot} resulting in no net effect of land use on NO{sub 3}{sup -} removal.

  18. 43 CFR 3272.12 - What environmental protection measures must I include in my utilization plan?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... minimum, your proposed measures to: (1) Prevent or control fires; (2) Prevent soil erosion; (3) Protect... resources; (6) Minimize air and noise pollution; and (7) Minimize hazards to public health and safety...

  19. 43 CFR 3272.12 - What environmental protection measures must I include in my utilization plan?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... minimum, your proposed measures to: (1) Prevent or control fires; (2) Prevent soil erosion; (3) Protect... resources; (6) Minimize air and noise pollution; and (7) Minimize hazards to public health and safety...

  20. 43 CFR 3272.12 - What environmental protection measures must I include in my utilization plan?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... minimum, your proposed measures to: (1) Prevent or control fires; (2) Prevent soil erosion; (3) Protect... resources; (6) Minimize air and noise pollution; and (7) Minimize hazards to public health and safety...

  1. 43 CFR 3272.12 - What environmental protection measures must I include in my utilization plan?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... minimum, your proposed measures to: (1) Prevent or control fires; (2) Prevent soil erosion; (3) Protect... resources; (6) Minimize air and noise pollution; and (7) Minimize hazards to public health and safety...

  2. Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

    PubMed Central

    Dźwiarek, Marek; Latała, Agata

    2016-01-01

    This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

  3. New standard measures for clinical voice analysis include high speed films

    NASA Astrophysics Data System (ADS)

    Pedersen, Mette; Munch, Kasper

    2012-02-01

    In the clinical work with patients in a medical voice clinic it is important to have a normal updated reference for the data used. Several new parameters have to be correlated to older traditional measures. The older ones are stroboscopy, eventually coordinated with electroglottography (EGG), the Multi- Dimensional-Voice Program and airflow rates. Long Time Averaged Spectrograms (LTAS) and phonetograms (voice profiles) are calculating the range and dynamics of tones of the patients. High-speed films, updated airflow measures as well as area calculations of phonotograms add information to the understanding of the glottis closure in single movements of the vocal cords. A multivariate analysis was made to study the connection between the measures. This information can be used in many connections, also in the otolaryngological clinic.

  4. Coherent Doppler Wind Lidar Technology for Space Based Wind Measurements Including SPARCLE

    NASA Technical Reports Server (NTRS)

    Kavaya, Michael J.; Singh, Upendra N.

    1999-01-01

    It has been over 30 years since coherent lidar systems first measured wind velocity, and over 20 years since the "ultimate application" of measuring Earth's winds from space was conceived. Coherent or heterodyne optical detection involves the combination (or mixing) of the returned optical field with a local oscillator (LO) laser's optical field on the optical detector. This detection technique yields the benefits of dramatically improved signal-to-noise ratios; insensitivity to detector noise, background light and multiply scattered light; reduction of the returned signal's dynamic range; and preservation of the optical signal spectrum for electronic and computer processing. (Note that lidar systems are also referred to as optical radar, laser radar, and LADAR systems.) Many individuals, agencies, and countries have pursued the goal of space-based wind measurements through technology development, experiments, field campaigns and studies.

  5. Verification of scattering parameter measurements in waveguides up to 325 GHz including highly-reflective devices

    NASA Astrophysics Data System (ADS)

    Schrader, T.; Kuhlmann, K.; Dickhoff, R.; Dittmer, J.; Hiebel, M.

    2011-07-01

    Radio-frequency (RF) scattering parameters (S-parameters) play an important role to characterise RF signal transmission and reflection of active and passive devices such as transmission lines, components, and small-signal amplifiers. Vector network analysers (VNAs) are employed as instrumentation for such measurements. During the last years, the upper frequency limit of this instrumentation has been extended up to several hundreds of GHz for waveguide measurements. Calibration and verification procedures are obligatory prior to the VNA measurement to achieve accurate results and/or to obtain traceability to the International System of Units (SI). Usually, verification is performed by measuring well-matched devices with known S-parameters such as attenuators or short precision waveguide sections (shims). In waveguides, especially above 110 GHz, such devices may not exist and/or are not traceably calibrated. In some cases, e.g. filter networks, the devices under test (DUT) are partly highly reflective. This paper describes the dependency of the S-parameters a) on the calibration procedure, b) on the applied torque to the flange screws during the mating process of the single waveguide elements. It describes further c) how highly-reflective devices (HRD) can be used to verify a calibrated VNA, and d) how a measured attenuation at several hundreds of GHz can be substituted by a well-known coaxial attenuation at 279 MHz, the intermediate frequency (IF) of the VNA, to verify the linearity. This work is a contribution towards traceability and to obtain knowledge about the measurement uncertainty of VNA instrumentation in the millimetre-wave range.

  6. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Additional control measures for East Boston. 52.1163 Section 52.1163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... spaces at Logan Airport and increased parking charges at remaining spaces; (5) Construction of...

  7. Cerebriform variant type of T cell prolymphocytic leukemia with complex karyotype including an additional segment at 1p36.1.

    PubMed

    Kasahara, Senji; Tsurumi, Hisashi; Shibata, Yuhei; Matsumoto, Takuro; Nakamura, Nobuhiko; Nakamura, Hiroshi; Kanemura, Nobuhiro; Goto, Naoe; Hara, Takeshi; Moriwaki, Hisataka

    2012-11-01

    We describe two patients with T cell prolymphocytic leukemia (T-PLL) who exhibited the same complex karyotype, including an additional segment at 1p36.1. One presented with secondary progression following an initial stable clinical course, and the other with typically progressive disease. Features of the cerebriform variant were identified in the peripheral blood of both patients. Aggressive symptoms, such as lymphocytosis, lymphadenopathy, pleural effusion, cutaneous involvement and hepatosplenomegaly, developed during the progressive phases. Levels of serum soluble interleukin 2 receptor increased when symptoms worsened. These patients did not have the karyotypic 14q11 abnormality and trisomy 8q that are features of non-Japanese patients. The prognoses of these patients were poor; one survived for 2 months and the other survived for 10 months after progression. A chromosomal abnormality may occur in other types of aggressive T-PLL, particularly when extramedullary infiltration is a feature.

  8. A New Approach to Including Student Intent Information in Performance Measures.

    ERIC Educational Resources Information Center

    Moore, Nelle

    The key to better outcome performance measures for community colleges is finding an effective and valid method of determining students' educational goals or reasons for attending the institution. In an attempt to find a solution to identifying student intent, San Juan College (SJC) postulated that student intent at any point in time can be most…

  9. Study raises questions about measurement of 'additionality,'or maintaining domestic health spending amid foreign donations.

    PubMed

    Garg, Charu C; Evans, David B; Dmytraczenko, Tania; Izazola-Licea, José-Antonio; Tangcharoensathien, Viroj; Ejeder, Tessa Tan-Torres

    2012-02-01

    Donor nations and philanthropic organizations increasingly require that funds provided for a specific health priority such as HIV should supplement domestic spending on that priority-a concept known as "additionality." We investigated the "additionality" concept using data from Honduras, Rwanda, and Thailand, and we found that the three countries increased funding for HIV in response to increased donor funding. In contrast, the study revealed that donors, faced with increased Global Fund resources for HIV in certain countries, tended to decrease their funding for HIV or shift funds for use in non-HIV health areas. More broadly, we found many problems in the measurement and interpretation of additionality. These findings suggest that it would be preferable for donors and countries to agree on how best to use available domestic and external funds to improve population health, and to develop better means of tracking outcomes, than to try to develop more sophisticated methods to track additionality.

  10. Measurement And Shape Analysis Including Vertebral Rotation Of Scoliotic Spines From Single Plane Radiographs

    NASA Astrophysics Data System (ADS)

    Drerup, B.; Hierholzer, E.

    1986-07-01

    Radiological assessment and follow-up control of scoliosis, i.e. of a lateral and rotational deviation of the spine, is performed mainly by single plane radiographs. Additional information may be gained from these radiographs by introducing a parametrized vertebral model. By analyzing the radiographic contours according to this model, axial rotation can be determined for any position and orientation of the vertebra. In addition to rotation several other data are determined for each vertebra, such as the tilting angle and the two-dimensional coordinates of the centre. By handling the data as a function of the vertebral location in spine, characteristic curves are generated. In order to find simple shape parameters for these characteristics, a smooth curve has to be fitted to the data points by a least squares approximation. This problem may be solved by a Fourier decomposition of the spinal curves. It appears, that the Fourier coefficients (amplitudes and phases) and some derived shape parameters lend themselves to a medical interpretation, which is consistent with the existing classification of the scoliotic spine.

  11. Measurement of platelet adhesiveness including the use of diatomaceous silica (celite).

    PubMed

    Pegrum, G D; Shaw, S; Wolff, S E

    1967-01-01

    Methods of platelet adhesiveness to glass and celite have been developed. The technical merits of these methods have been compared with a method using adenosine diphosphate (ADP). The aspects of platelet stickiness measured by the various techniques may be somewhat different. Bearing this in mind, the reproducibility of the results using each of the three methods has been assessed on a series of healthy donors.

  12. Tensiometer for shallow or deep measurements including vadose zone and aquifers

    DOEpatents

    Faybishenko, Boris

    1999-01-01

    A two cell tensiometer is described in which water level in the lower cell is maintained at a relatively constant height, and in equilibrium with the water pressure of materials that surround the tensiometer. An isolated volume of air in the lower cell changes pressure proportionately to the changing water pressure of the materials that surround the tensiometer. The air pressure is measured remotely. The tensiometer can be used in drying as well as wetting cycles above and below the water table.

  13. Interpretation of thermoreflectance measurements with a two-temperature model including non-surface heat deposition

    NASA Astrophysics Data System (ADS)

    Regner, K. T.; Wei, L. C.; Malen, J. A.

    2015-12-01

    We develop a solution to the two-temperature diffusion equation in axisymmetric cylindrical coordinates to model heat transport in thermoreflectance experiments. Our solution builds upon prior solutions that account for two-channel diffusion in each layer of an N-layered geometry, but adds the ability to deposit heat at any location within each layer. We use this solution to account for non-surface heating in the transducer layer of thermoreflectance experiments that challenge the timescales of electron-phonon coupling. A sensitivity analysis is performed to identify important parameters in the solution and to establish a guideline for when to use the two-temperature model to interpret thermoreflectance data. We then fit broadband frequency domain thermoreflectance (BB-FDTR) measurements of SiO2 and platinum at a temperature of 300 K with our two-temperature solution to parameterize the gold/chromium transducer layer. We then refit BB-FDTR measurements of silicon and find that accounting for non-equilibrium between electrons and phonons in the gold layer does lessen the previously observed heating frequency dependence reported in Regner et al. [Nat. Commun. 4, 1640 (2013)] but does not completely eliminate it. We perform BB-FDTR experiments on silicon with an aluminum transducer and find limited heating frequency dependence, in agreement with time domain thermoreflectance results. We hypothesize that the discrepancy between thermoreflectance measurements with different transducers results in part from spectrally dependent phonon transmission at the transducer/silicon interface.

  14. Measuring energy metabolism in cultured cells, including human pluripotent stem cells and differentiated cells

    PubMed Central

    Zhang, Jin; Nuebel, Esther; Wisidagama, Dona R R; Setoguchi, Kiyoko; Hong, Jason S; Van Horn, Christine M; Imam, Sarah S; Vergnes, Laurent; Malone, Cindy S; Koehler, Carla M; Teitell, Michael A

    2013-01-01

    Measurements of glycolysis and mitochondrial function are required to quantify energy metabolism in a wide variety of cellular contexts. In human pluripotent stem cells (hPSCs) and their differentiated progeny, this analysis can be challenging because of the unique cell properties, growth conditions and expense required to maintain these cell types. Here we provide protocols for analyzing energy metabolism in hPSCs and their early differentiated progenies that are generally applicable to mature cell types as well. Our approach has revealed distinct energy metabolism profiles used by hPSCs, differentiated cells, a variety of cancer cells and Rho-null cells. The protocols measure or estimate glycolysis on the basis of the extracellular acidification rate, and they measure or estimate oxidative phosphorylation on the basis of the oxygen consumption rate. Assays typically require 3 h after overnight sample preparation. Companion methods are also discussed and provided to aid researchers in developing more sophisticated experimental regimens for extended analyses of cellular bioenergetics. PMID:22576106

  15. Interpretation of thermoreflectance measurements with a two-temperature model including non-surface heat deposition

    SciTech Connect

    Regner, K. T.; Wei, L. C.; Malen, J. A.

    2015-12-21

    We develop a solution to the two-temperature diffusion equation in axisymmetric cylindrical coordinates to model heat transport in thermoreflectance experiments. Our solution builds upon prior solutions that account for two-channel diffusion in each layer of an N-layered geometry, but adds the ability to deposit heat at any location within each layer. We use this solution to account for non-surface heating in the transducer layer of thermoreflectance experiments that challenge the timescales of electron-phonon coupling. A sensitivity analysis is performed to identify important parameters in the solution and to establish a guideline for when to use the two-temperature model to interpret thermoreflectance data. We then fit broadband frequency domain thermoreflectance (BB-FDTR) measurements of SiO{sub 2} and platinum at a temperature of 300 K with our two-temperature solution to parameterize the gold/chromium transducer layer. We then refit BB-FDTR measurements of silicon and find that accounting for non-equilibrium between electrons and phonons in the gold layer does lessen the previously observed heating frequency dependence reported in Regner et al. [Nat. Commun. 4, 1640 (2013)] but does not completely eliminate it. We perform BB-FDTR experiments on silicon with an aluminum transducer and find limited heating frequency dependence, in agreement with time domain thermoreflectance results. We hypothesize that the discrepancy between thermoreflectance measurements with different transducers results in part from spectrally dependent phonon transmission at the transducer/silicon interface.

  16. The QCRad Value Added Product: Surface Radiation Measurement Quality Control Testing, Including Climatology Configurable Limits

    SciTech Connect

    Long, CN; Shi, Y

    2006-09-01

    This document describes the QCRad methodology, which uses climatological analyses of the surface radiation measurements to define reasonable limits for testing the data for unusual data values. The main assumption is that the majority of the climatological data are “good” data, which for field sites operated with care such as those of the Atmospheric Radiation Measurement (ARM) Program is a reasonable assumption. Data that fall outside the normal range of occurrences are labeled either “indeterminate” (meaning that the measurements are possible, but rarely occurring, and thus the values cannot be identified as good) or “bad” depending on how far outside the normal range the particular data reside. The methodology not only sets fairly standard maximum and minimum value limits, but also compares what we have learned about the behavior of these instruments in the field to other value-added products (VAPs), such as the Diffuse infrared (IR) Loss Correction VAP (Younkin and Long 2004) and the Best Estimate Flux VAP (Shi and Long 2002).

  17. Polarization birefringence measurements for characterizing the myocardium, including healthy, infarcted, and stem-cell-regenerated tissues

    NASA Astrophysics Data System (ADS)

    Wood, Michael F. G.; Ghosh, Nirmalya; Wallenburg, Marika A.; Li, Shu-Hong; Weisel, Richard D.; Wilson, Brian C.; Li, Ren-Ke; Vitkin, I. Alex

    2010-07-01

    Myocardial infarction leads to structural remodeling of the myocardium, in particular to the loss of cardiomyocytes due to necrosis and an increase in collagen with scar formation. Stem cell regenerative treatments have been shown to alter this remodeling process, resulting in improved cardiac function. As healthy myocardial tissue is highly fibrous and anisotropic, it exhibits optical linear birefringence due to the different refractive indices parallel and perpendicular to the fibers. Accordingly, changes in myocardial structure associated with infarction and treatment-induced remodeling will alter the anisotropy exhibited by the tissue. Polarization-based linear birefringence is measured on the myocardium of adult rat hearts after myocardial infarction and compared with hearts that had received mesenchymal stem cell treatment. Both point measurement and imaging data show a decrease in birefringence in the region of infarction, with a partial rebound back toward the healthy values following regenerative treatment with stem cells. These results demonstrate the ability of optical polarimetry to characterize the micro-organizational state of the myocardium via its measured anisotropy, and the potential of this approach for monitoring regenerative treatments of myocardial infarction.

  18. Measuring and Reducing Off-Target Activities of Programmable Nucleases Including CRISPR-Cas9.

    PubMed

    Koo, Taeyoung; Lee, Jungjoon; Kim, Jin-Soo

    2015-06-01

    Programmable nucleases, which include zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and RNA-guided engineered nucleases (RGENs) repurposed from the type II clustered, regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) system are now widely used for genome editing in higher eukaryotic cells and whole organisms, revolutionising almost every discipline in biological research, medicine, and biotechnology. All of these nucleases, however, induce off-target mutations at sites homologous in sequence with on-target sites, limiting their utility in many applications including gene or cell therapy. In this review, we compare methods for detecting nuclease off-target mutations. We also review methods for profiling genome-wide off-target effects and discuss how to reduce or avoid off-target mutations.

  19. Review of Skin Friction Measurements Including Recent High-Reynolds Number Results from NASA Langley NTF

    NASA Technical Reports Server (NTRS)

    Watson, Ralph D.; Hall, Robert M.; Anders, John B.

    2000-01-01

    This paper reviews flat plate skin friction data from early correlations of drag on plates in water to measurements in the cryogenic environment of The NASA Langley National Transonic Facility (NTF) in late 1996. The flat plate (zero pressure gradient with negligible surface curvature) incompressible skin friction at high Reynolds numbers is emphasized in this paper, due to its importance in assessing the accuracy of measurements, and as being important to the aerodynamics of large scale vehicles. A correlation of zero pressure gradient skin friction data minimizing extraneous effects between tests is often used as the first step in the calculation of skin friction in complex flows. Early data compiled by Schoenherr for a range of momentum thickness Reynolds numbers, R(sub Theta) from 860 to 370,000 contained large scatter, but has proved surprisingly accurate in its correlated form. Subsequent measurements in wind tunnels under more carefully controlled conditions have provided inputs to this database, usually to a maximum R(sub Theta) of about 40,000. Data on a large axisymmetric model in the NASA Langley National Transonic Facility extends the upper limit in incompressible R(sub Theta) to 619,800 using the van Driest transformation. Previous data, test techniques, and error sources ar discussed, and the NTF data will be discussed in detail. The NTF Preston tube and Clauser inferred data accuracy is estimated to be within -2 percent of a power-law curve fit, and falls above the Spalding theory by 1 percent at R(sub Theta) of about 600,000.

  20. Methods of Measuring Vapor Pressures of Lubricants With Their Additives Using TGA and/or Microbalances

    NASA Technical Reports Server (NTRS)

    Scialdone, John J.; Miller, Michael K.; Montoya, Alex F.

    1996-01-01

    The life of a space system may be critically dependent on the lubrication of some of its moving parts. The vapor pressure, the quantity of the available lubricant, the temperature and the exhaust venting conductance passage are important considerations in the selection and application of a lubricant. In addition, the oil additives employed to provide certain properties of low friction, surface tension, antioxidant and load bearing characteristics, are also very important and need to be known with regard to their amounts and vapor pressures. This paper reports on the measurements and analyses carried out to obtain those parameters for two often employed lubricants, the Apiezon(TM)-C and the Krytox(TM) AB. The measurements were made employing an electronic microbalance and a thermogravimetric analyzer (TGA) modified to operate in a vacuum. The results have been compared to other data on these oils when available. The identification of the mass fractions of the additives in the oil and their vapor pressures as a function of the temperature were carried out. These may be used to estimate the lubricant life given its quantity and the system vent exhaust conductance. It was found that the Apiezon(TM)-C has three main components with different rates of evaporation while the Krytox(TM) did not indicate any measurable additive.

  1. Human calcium metabolism including bone resorption measured with {sup 41}Ca tracer

    SciTech Connect

    Freeman, S.P.H.T.; King, J.C.; Vieira, N.E.; Woodhouse, L.R.; Yergey, A.L.

    1996-08-01

    Accelerator mass spectrometry is so sensitive to small quantities of {sup 41}Ca that it might be used as a tracer in the study of human calcium kinetics to generate unique kinds of data. In contrast with the use of other Ca isotopic tracers, {sup 41}Ca tracer can be so administered that the tracer movements between the various body pools achieve a quasi steady state. Resorbing bone may thus be directly measured. We have tested such a protocol against a conventional stable isotope experiment with good agreement.

  2. Tensiometer for shallow or deep measurements including vadose zone and aquifers

    DOEpatents

    Faybishenko, B.

    1999-08-24

    A two cell tensiometer is described in which water level in the lower cell is maintained at a relatively constant height, and in equilibrium with the water pressure of materials that surround the tensiometer. An isolated volume of air in the lower cell changes pressure proportionately to the changing water pressure of the materials that surround the tensiometer. The air pressure is measured remotely. The tensiometer can be used in drying as well as wetting cycles above and below the water table. 8 figs.

  3. A methodological evaluation of volumetric measurement techniques including three-dimensional imaging in breast surgery.

    PubMed

    Hoeffelin, H; Jacquemin, D; Defaweux, V; Nizet, J L

    2014-01-01

    Breast surgery currently remains very subjective and each intervention depends on the ability and experience of the operator. To date, no objective measurement of this anatomical region can codify surgery. In this light, we wanted to compare and validate a new technique for 3D scanning (LifeViz 3D) and its clinical application. We tested the use of the 3D LifeViz system (Quantificare) to perform volumetric calculations in various settings (in situ in cadaveric dissection, of control prostheses, and in clinical patients) and we compared this system to other techniques (CT scanning and Archimedes' principle) under the same conditions. We were able to identify the benefits (feasibility, safety, portability, and low patient stress) and limitations (underestimation of the in situ volume, subjectivity of contouring, and patient selection) of the LifeViz 3D system, concluding that the results are comparable with other measurement techniques. The prospects of this technology seem promising in numerous applications in clinical practice to limit the subjectivity of breast surgery. PMID:24511536

  4. Measurements of the ponderomotive force including sideband mode coupling effects and damping rates

    SciTech Connect

    Meassick, S.; Intrator, T.; Hershkowitz, N.; Browning, J.; Majeski, R.

    1989-05-01

    Measurements of the interactions of waves in the ion cyclotron range of frequencies (ICRF) with flute interchange modes are presented. Interactions between the applied l = 1 radio frequency (rf) wave and an m = -1 flute mode give rise to sidebands above and below the rf frequency with mode numbers of l = 0 and l = +2, respectively. The contribution of the sideband terms to stability are shown to cancel 40% of the direct ponderomotive contribution. This is less than the 90% predicted by theory (Phys. Fluids 30, 148 (1987)) for an applied l = +1 rf wave above the ion cyclotron frequency with a large separation between the plasma and the vacuum vessel. Measurements of the linear growth and damping rate of the flute instability in the presence of rf are in good agreement with that calculated by considering only the curvature-driven instability and the ponderomotive force. The growth rate of the magnetohydrodynamic mode is consistent with the primary force acting on the plasma being the curvature force. This method allows a determination of the net stabilizing force on the plasma.

  5. Improvement in topology measurement accuracy of atomic force microscope using additional sensor

    NASA Astrophysics Data System (ADS)

    Yoon, Yeomin; Jeong, Jiseong; Kim, Junsup; Park, Kyihwan

    2015-07-01

    The topology image of an atomic force microscope is obtained by picking up a controlled output of a force-feedback loop that is proportional to the height of a sample under the assumption that no dynamics in a z-axis actuator exist. However, the dynamic effects such as hysteresis and creep in a PZT driving z-axis actuator cannot be ignored. To solve this problem, a strain-gage sensor is used as an additional sensor, which enables measurement of the absolute displacement of a z-axis PZT nano scanner. The advantage of using an additional sensor is experimentally provided and validated in topology images.

  6. Measuring and modeling the lifetime of nitrous oxide including its variability

    NASA Astrophysics Data System (ADS)

    Prather, Michael J.; Hsu, Juno; DeLuca, Nicole M.; Jackman, Charles H.; Oman, Luke D.; Douglass, Anne R.; Fleming, Eric L.; Strahan, Susan E.; Steenrod, Stephen D.; Søvde, O. Amund; Isaksen, Ivar S. A.; Froidevaux, Lucien; Funke, Bernd

    2015-06-01

    The lifetime of nitrous oxide, the third-most-important human-emitted greenhouse gas, is based to date primarily on model studies or scaling to other gases. This work calculates a semiempirical lifetime based on Microwave Limb Sounder satellite measurements of stratospheric profiles of nitrous oxide, ozone, and temperature; laboratory cross-section data for ozone and molecular oxygen plus kinetics for O(1D); the observed solar spectrum; and a simple radiative transfer model. The result is 116 ± 9 years. The observed monthly-to-biennial variations in lifetime and tropical abundance are well matched by four independent chemistry-transport models driven by reanalysis meteorological fields for the period of observation (2005-2010), but all these models overestimate the lifetime due to lower abundances in the critical loss region near 32 km in the tropics. These models plus a chemistry-climate model agree on the nitrous oxide feedback factor on its own lifetime of 0.94 ± 0.01, giving N2O perturbations an effective residence time of 109 years. Combining this new empirical lifetime with model estimates of residence time and preindustrial lifetime (123 years) adjusts our best estimates of the human-natural balance of emissions today and improves the accuracy of projected nitrous oxide increases over this century.

  7. An assessment of PCB degradation by microogransims including methods for measuring mineralization

    SciTech Connect

    Hadden, C.; Edenborn, H.; Osborne, T.; Holdsworth, G.; Revis, N.

    1990-12-31

    These studies sought to isolate and identify organism(s) from PCB contaminated soil and sediment that degrade PCB; to provide information on the potential of organisms in soil samples taken from a PCB-contaminated area to mineralize or dechlorinate PCB congeners; to assess potential enhancement of PCB biodegradation as a result of nutritional amendment of the samples; and to carry out analyses of successive lysimeter samples to determine whether field treatments have had an effect on the capacity of soil microbes to mineralize PCBS. We have expended considerable effort to validate the fractionation procedure used to assess mineralization and conversion of PCB substrates. The assessment relies on the ability to measure [{sup 14}C]-labeled CO{sub 2} in the presence of potentially volatile [{sup 14}C]-labeled PCB and degradation products to differentiate between volatile and non-volatile [{sup 14}C]-labeled compounds between water-soluble products of metabolism and a mixture of unchanged substrate and other water-insoluble products and between metabolism and loss or non-extractability of the substrate.

  8. Local heat transfer measurement with liquid crystals on rotating surfaces including non-axisymmetric cases

    NASA Technical Reports Server (NTRS)

    Metzger, D. E.; Kim, Y. K.

    1993-01-01

    An overview and summary of test methods and results are given for the problem of measuring local heat transfer on rotating surfaces that model gas turbine engine disks. Disk cavity situations generically similar to those encountered in the high pressure stage disk cooling are considered, with cooling air supplied both at or near the wheel centerline as well as through single or multiple jets impinging outboard on the wheel near the blade attachment region. In some situations provision has been made for ingestion into the disk-cavity from the gas path region radially outboard of the disk. Local heat transfer rates in all cases are determined from the color display from a thin coating of encapsulated liquid crystals sprayed onto the disk, in conjunction with use of a video camera and computer vision system. For cases with axisymmetric disk surfaces, the coated surfaces are illuminated and viewed continuously, and detailed radial distributions of local Nusselt number are obtained. For non-axisymmetric disk surfaces, such as encountered in the vicinity of bolt heads, the disk is illuminated with stroboscopic light, and a method has been developed and used to synchronize the computer frame grabber with the illumination.

  9. A new approach to handle additive and multiplicative uncertainties in the measurement for ? LPV filtering

    NASA Astrophysics Data System (ADS)

    Lacerda, Márcio J.; Tognetti, Eduardo S.; Oliveira, Ricardo C. L. F.; Peres, Pedro L. D.

    2016-04-01

    This paper presents a general framework to cope with full-order ? linear parameter-varying (LPV) filter design subject to inexactly measured parameters. The main novelty is the ability of handling additive and multiplicative uncertainties in the measurements, for both continuous and discrete-time LPV systems, in a unified approach. By conveniently modelling scheduling parameters and uncertainties affecting the measurements, the ? filter design problem can be expressed in terms of robust matrix inequalities that become linear when two scalar parameters are fixed. Therefore, the proposed conditions can be efficiently solved through linear matrix inequality relaxations based on polynomial solutions. Numerical examples are presented to illustrate the improved efficiency of the proposed approach when compared to other methods and, more important, its capability to deal with scenarios where the available strategies in the literature cannot be used.

  10. Measurement of powder bed density in powder bed fusion additive manufacturing processes

    NASA Astrophysics Data System (ADS)

    Jacob, G.; Donmez, A.; Slotwinski, J.; Moylan, S.

    2016-11-01

    Many factors influence the performance of additive manufacturing (AM) processes, resulting in a high degree of variation in process outcomes. Therefore, quantifying these factors and their correlations to process outcomes are important challenges to overcome to enable widespread adoption of emerging AM technologies. In the powder bed fusion AM process, the density of the powder layers in the powder bed is a key influencing factor. This paper introduces a method to determine the powder bed density (PBD) during the powder bed fusion (PBF) process. A complete uncertainty analysis associated with the measurement method was also described. The resulting expanded measurement uncertainty, U PBD (k  =  2), was determined as 0.004 g · cm‑3. It was shown that this expanded measurement uncertainty is about three orders of magnitude smaller than the typical powder bed density. This method enables establishing correlations between the changes in PBD and the direction of motion of the powder recoating arm.

  11. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    SciTech Connect

    Broxton, D.E.; Beyth, M.

    1980-07-01

    Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  12. 45 CFR 2522.650 - What happens if I fail to meet the performance measures included in my grant?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... APPLICANTS Evaluation Requirements Performance Measures: Requirements and Procedures § 2522.650 What happens if I fail to meet the performance measures included in my grant? (a) If you are significantly under... 45 Public Welfare 4 2010-10-01 2010-10-01 false What happens if I fail to meet the...

  13. Combined analysis of passive and active seismic measurements using additional geologic data for the determination of shallow subsurface structures

    NASA Astrophysics Data System (ADS)

    Horstmann, Tobias; Brüstle, Andrea; Spies, Thomas; Schlittenhardt, Jörg; Schmidt, Bernd

    2016-04-01

    A detailed knowledge of subsurface structure is essential for geotechnical projects and local seismic hazard analyses. Passive seismic methods like microtremor measurements are widely used in geotechnical practice, but limitations and developments are still in focus of scientific discussion. The presentation outlines microtremor measurements in the context of microzonation in the scale of districts or small communities. H/V measurements are used to identify zones with similar underground properties. Subsequently a shear wave velocity (Vs) depth profile for each zone is determined by array measurements at selected sites. To reduce possible uncertainties in dispersion curve analyses of passive array measurements and ambiguities within the inversion process, we conducted an additional active seismic experiment and included available geological information. The presented work is realized in the framework of the research project MAGS2 ("Microseismic Activity of Geothermal Systems") and deals with the determination of seismic hazard analysis at sites near deep geothermal power plants in Germany. The measurements were conducted in the Upper Rhine Graben (URG) and the Bavarian molasses, where geothermal power plants are in operation. The results of the H/V- and array-measurements in the region of Landau (URG) are presented and compared to known geological-tectonic structures. The H/V measurements show several zones with similar H/V-curves which indicate homogenous underground properties. Additionally to the passive seismic measurements an active refraction experiment was performed and evaluated using the MASW method („Multichannel Analysis of Surface Waves") to strengthen the determination of shear-wave-velocity depth profile. The dispersion curves for Rayleigh-waves of the active experiment support the Rayleigh-dispersion curves from passive measurements and therefore provide a valuable supplement. Furthermore, the Rayleigh-wave ellipticity was calculated to reduce

  14. Balance times of multidimensional quasi-additive potentials for a measure-preserving semiflow

    NASA Astrophysics Data System (ADS)

    Dai, Xiongping

    2013-12-01

    Let \\theta\\colon X\\times{T}\\rightarrow X;\\ (x,t)\\mapsto{x{\\boldsymbol\\cdot} t} , where {T}={Z}_+ or {R}_+ , be a measure-preserving semiflow on a probability space (X,\\mathscr{F},\\mu) and given a d-dimensional measurable potential p\\colon X\\times{T}\\rightarrow{R}^d which is δ-quasi-additive with respect to θ, where δ ⩾ 0 namely, for μ-a.e. x ∈ X and for all s,t\\in{T} , \\begin{equation*}|p(x,t+s)-(p(x,t)+p(x{\\boldsymbol\\cdot} t,s))|\\le\\delta. \\end{equation*} We prove that if there exists a measurable {R}^d -valued function p*(x) such that \\begin{equation*}\\lim_{t\\to\\infty}\\frac{1}{t}p(x,t)=p^*(x)\\tqs for~\\mu-a.e.\\, x\\in X, \\end{equation*} then for μ-a.e. x ∈ X and any ε > 0, there holds the following tight control by p*(x): \\begin{equation*}{\\bf mes}\\left\\{t\\in{T}\\colon|p(x,t)-p^*(x)t|\\le\\varepsilon+ \\delta\\right\\}=\\infty, \\end{equation*} where mes{·} stands for the Lebesgue measure in the real line {R} or the counting measure in {Z} . This can be applied to the study of ergodic forced monotonic circle maps and of the normal numbers.

  15. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Lewistown NTMS Quadrangle, Montana, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-08-01

    Totals of 758 water and 1170 sediment samples were collected from 1649 locations in the Levistown quadrangle. Water samples were collected at streams, springs, wells, ponds, and marshes; sediment samples were obtained from streams, springs, and ponds. Histograms and statistical data for uranium concentrations in water and sediment samples and thorium concentrations in sediment samples are given. All samples were collected at the nominal reconnaissance density of one sample location per 10 km/sup 2/. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters and for sediments. Uranium to thorium (U/Th) ratios for sediment samples are included. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 ppB U were reanalyzed by delayed-neutron counting. Sediments were analyzed for U and Th as well as Al, Sb, Ba, Be, Bi, Cd, Ca, Ce, Cs, Cl, Cr, Co, Cu, Dy, Eu, Au, Hf, Fe, La, Pb, Li, Lu, Mg, Mn, Ni, Nb, K, Rb, Sa, Sc, Ag, Na, Sr, Ta, Tb, Sn, Ti, W, V, Yb, and Zn. All sediments were analyzed for U by delayed neutron counting. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 9 elements, and by arc-source emission spectrography for 2 elements. Analytical results are reported as parts per million. Descriptions of procedures used for analysis of water and sediments samples as well as analytical precisions and detection limits are given.

  16. Validation of the Crime and Violence Scale (CVS) against the Rasch Measurement Model Including Differences by Gender, Race, and Age

    ERIC Educational Resources Information Center

    Conrad, Kendon J.; Riley, Barth B.; Conrad, Karen M.; Chan, Ya-Fen; Dennis, Michael L.

    2010-01-01

    In assessing criminality, researchers have used counts of crimes, arrests, and so on, because interval measures were not available. Additionally, crime seriousness varies depending on demographic factors. This study examined the Crime and Violence Scale (CVS) regarding psychometric quality using item response theory (IRT) and invariance of the…

  17. A multiple additive regression tree analysis of three exposure measures during Hurricane Katrina.

    PubMed

    Curtis, Andrew; Li, Bin; Marx, Brian D; Mills, Jacqueline W; Pine, John

    2011-01-01

    This paper analyses structural and personal exposure to Hurricane Katrina. Structural exposure is measured by flood height and building damage; personal exposure is measured by the locations of 911 calls made during the response. Using these variables, this paper characterises the geography of exposure and also demonstrates the utility of a robust analytical approach in understanding health-related challenges to disadvantaged populations during recovery. Analysis is conducted using a contemporary statistical approach, a multiple additive regression tree (MART), which displays considerable improvement over traditional regression analysis. By using MART, the percentage of improvement in R-squares over standard multiple linear regression ranges from about 62 to more than 100 per cent. The most revealing finding is the modelled verification that African Americans experienced disproportionate exposure in both structural and personal contexts. Given the impact of exposure to health outcomes, this finding has implications for understanding the long-term health challenges facing this population.

  18. Measurements of aerosol-cloud interactions, including on-line particle chemical composition, at the Jungfraujoch Global Atmospheric Watch Station

    NASA Astrophysics Data System (ADS)

    Coe, H.; Allan, J. D.; Alfarra, M. R.; Williams, P. I.; Bower, K. N.; Gallagher, M. W.; Choularton, T. W.; Weingartner, E.; Corrigan, C.; Baltensperger, U.

    2003-04-01

    The Global Atmospheric Watch research laboratory is located in the Sphinx building, 3580 m asl; 46.55oN, 7.98oE on the Jungfraujoch in the Swiss Alps. The site is exposed to a wide range of conditions and frequently samples long range transported lower free tropospheric air, and is exposed to cloudy conditions. The Paul Scherrer Institute have previously developed a dual inlet system that allows measurements of the total sub-micron aerosol population (dry residuals and interstitial particles) and interstitial particles alone to be made alternately every few minutes. During July 2002 an Aerodyne Aerosol Mass Spectrometer was coupled to the dual inlet and was used to sample the composition of both the total particle distribution and the interstitial fraction and hence derive the mass loadings of the dry droplet residuals. In out of cloud conditions the aerosol composition can be linked to air mass history and age of the air mass. Microphysical measurements include cloud droplet size distributions made using an FSSP and also a new phase Doppler anemometry system. A comparison between these probes will be made. Two different types of cloud droplet spectra were observed. In the first type a large number of cloud droplets were measured with a single, narrow drop size distribution and modal diameter of around 10 um. In the second type, a bimodal cloud droplet spectrum occurred with a smaller mode (by number) at around 20 um, in addition to the 10 um mode. The aerosol mass spectrometry shows that the composition of the residuals from the two spectrum types is very different, the former type being composed mainly of sulphate, the latter a combination of nitrate, sulphate and organic material. We have also shown that the organic material observed is highly oxidized. We argue that the bimodality arises as a result of mixing of cloud droplets below the site that have been activated separately: the larger a less numerous mode in the widespread strato-cumulus forming under low

  19. Airborne Sunphotometer Studies of Aerosol Properties and Effects, Including Closure Among Satellite, Suborbital Remote, and In situ Measurements

    NASA Technical Reports Server (NTRS)

    Russlee, Philip B.; Schmid, B.; Redemann, J.; Livingston, J. M.; Bergstrom, R. W.; Ramirez, S. A.; Hipskind, R. Stephen (Technical Monitor)

    2001-01-01

    Airborne sunphotometry has been used to measure aerosols from North America, Europe, and Africa in coordination with satellite and in situ measurements in TARFOX (1996), ACE-2 (1997), PRIDE (2000), and SAFARI 2000. Similar coordinated measurements of Asian aerosols are being conducted this spring in ACE-Asia and are planned for North American aerosols this summer in CLAMS. This paper summarizes the approaches used, key results, and implications for aerosol properties and effects, such as single scattering albedo and regional radiative forcing. The approaches exploit the three-dimensional mobility of airborne sunphotometry to access satellite scenes over diverse surfaces (including open ocean with and without sunglint) and to match exactly the atmospheric layers sampled by airborne in situ measurements and other radiometers. These measurements permit tests of the consistency, or closure, among such diverse measurements as aerosol size-resolved chemical composition; number or mass concentration; light extinction, absorption, and scattering (total, hemispheric back and 180 deg.); and radiative fluxes. In this way the airborne sunphotometer measurements provide a key link between satellite and in situ measurements that helps to understand any discrepancies that are found. These comparisons have led to several characteristic results. Typically these include: (1) Better agreement among different types of remote measurements than between remote and in situ measurements. (2) More extinction derived from transmission measurements than from in situ measurements. (3) Larger aerosol absorption inferred from flux radiometry than from in situ measurements. Aerosol intensive properties derived from these closure studies have been combined with satellite-retrieved fields of optical depth to produce fields of regional radiative forcing. We show results for the North Atlantic derived from AVHRR optical depths and aerosol intensive properties from TARFOX and ACE-2. Companion papers

  20. Simulation and measurement of optical aberrations of injection molded progressive addition lenses.

    PubMed

    Li, Likai; Raasch, Thomas W; Yi, Allen Y

    2013-08-20

    Injection molding is an important mass-production tool in the optical industry. In this research our aim is to develop a process of combining ultraprecision diamond turning and injection molding to create a unique low-cost manufacturing process for progressive addition lenses (PALs). In industry, it is a well-known fact that refractive index variation and geometric deformation of injection molded lenses due to the rheological properties of polymers will distort their optical performance. To address this problem, we developed a method for determining the optical aberrations of the injection molded PALs. This method involves reconstructing the wavefront pattern in the presence of uneven refractive index distribution and surface warpage using a finite element method. In addition to numerical modeling, a measurement system based on a Shack-Hartmann wavefront sensor was used to verify the modeling results. The measured spherocylindrical powers and aberrations of the PALs were in good agreement with the model. Consequently, the optical aberrations of injection molded PALs were successfully predicted by finite element modeling. In summary, it was demonstrated in this study that numerically based optimization for PAL manufacturing is feasible. PMID:24085007

  1. Continuous field measurement of N2O isotopologues using FTIR spectroscopy following 15N addition

    NASA Astrophysics Data System (ADS)

    Phillips, R. L.; Griffith, D. W.; Dijkstra, F. A.; Lugg, G.; Lawrie, R.; Macdonald, B.

    2012-12-01

    Anthropogenic additions of fertilizer nitrogen (N) have significantly increased the mole fraction of nitrous oxide (N2O) in the troposphere. Tracking the fate of fertilizer N and its transformation to N2O is important to advance knowledge of greenhouse gas emissions from soils. Transport and transformations are frequently studied using 15N labeling experiments, but instruments capable of continuous measurements of 15N-N2O at the surface of soil have only recently come to the fore. Our primary aim was to quantify emissions of N2O and the fraction of 15N emitted as N2O from an agricultural soil following 15N addition using a mobile Fourier Transform Infrared (FTIR) spectrometer. We set up a short-term field experiment on a coastal floodplain site near Nowra, New South Wales. We deployed an automated chamber system connected to a multi-pass cell (optical pathlength 24 m) and low resolution FTIR spectrometer to measure fluxes of all N2O isotopologues collected from five 0.25 m2 chambers every three hours. We measured N2O fluxes pre and post-application of 15N-labeled substrate as potassium nitrate (KNO3) or urea [CO(NH2)2] to the soil surface. Root mean square uncertainties for all isotopologue measurements were less than 0.3 nmol mol-1 for 1 minute average concentration measurements, and minimum detectable fluxes for each isotopologue were <0.1 ng N m-2 s-1. Emissions of all N2O isotopologues were evident immediately following 15N addition. Emissions of 14N15NO, 15N14NO and 15N15NO isotopologues subsided within 10 d, but 14N14NO fluxes were evident over the entire experiment. The figure provides an overview of the emissions. Cumulative 15N-N2O fluxes (sum of the three 15N isotopologues) per chamber for the 14 days following 15N addition ranged from 1.5 to 10.3 mg 15N-N2O m-2. The chambers were destructively sampled after 2 weeks and 15N analyzed in soil and plant material using isotope ratio mass spectrometry. Approximately 1% (range 0.7 - 1.9%) of the total amount of

  2. Additional Measurements and Analyses of H217O and H218O

    NASA Astrophysics Data System (ADS)

    Pearson, John; Yu, Shanshan; Walters, Adam; Daly, Adam M.

    2015-06-01

    Historically the analysis of the spectrum of water has been a balance between the quality of the data set and the applicability of the Hamiltonian to a highly non-rigid molecule. Recently, a number of different non-rigid analysis approaches have successfully been applied to 16O water resulting in a self-consistent set of transitions and energy levels to high J which allowed the spectrum to be modeled to experimental precision. The data set for 17O and 18O water was previously reviewed and many of the problematic measurements identified, but Hamiltonian modeling of the remaining data resulted in significantly poorer quality fits than that for the 16O parent. As a result, we have made additional microwave measurements and modeled the existing 17O and 18O data sets with an Euler series model. This effort has illuminated a number of additional problematic measurements in the previous data sets and has resulted in analyses of 17O and 18O water that are of similar quality to the 16O analysis. We report the new lines, the analyses and make recommendations on the quality of the experimental data sets. SS. Yu, J.C. Pearson, B.J. Drouin et al. J. Mol. Spectrosc. 279,~16-25 (2012) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 117, 29-58 (2013) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 110, 573-596 (2009) H.M. Pickett, J.C. Pearson, C.E. Miller J. Mol. Spectrosc. 233, 174-179 (2005)

  3. Including xpc® feed additive in the diet of inoculated broilers during grow-out helps control salmonella associated with their carcasses after processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this study was to test XPC® feed additive for control of Salmonella in poultry meat products. Day of hatch broiler chicks were gavaged with 106 cells of a nalidixic acid resistant marker strain of Salmonella Typhimurium and placed on clean pine shavings in 9 separate floor pens (25 ...

  4. Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

    DOE PAGES

    McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; et al

    2016-01-27

    In research and industrial environments, additive manufacturing (AM) of metals and alloys is becoming a pervasive technology, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al–Cu and Al–Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid–liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. We observed microstructure evolution, solidification product, andmore » presence of a morphological instability at the solid–liquid interface in the Al–4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.« less

  5. Additional flow field studies of the GA(W)-1 airfoil with 30-percent chord Fowler flap including slot-gap variations and cove shape modifications

    NASA Technical Reports Server (NTRS)

    Wentz, W. H., Jr.; Ostowari, C.

    1983-01-01

    Experimental measurements were made to determine the effects of slot gap opening and flap cove shape on flap and airfoil flow fields. Test model was the GA(W)-1 airfoil with 0.30c Fowler flap deflected 35 degrees. Tests were conducted with optimum, wide and narrow gaps, and with three cove shapes. Three test angles were selected, corresponding to pre-stall and post-stall conditions. Reynolds number was 2,200,000 and Mach number was 0.13. Force, surface pressure, total pressure, and split-film turbulence measurements were made. Results were compared with theory for those parameters for which theoretical values were available.

  6. Improvement of ocean loading correction on gravity data with additional tide gauge measurements

    NASA Astrophysics Data System (ADS)

    Neumeyer, Juergen; del Pino, Jorge; Dierks, Olaf; Sun, He-Ping; Pflug, Hartmut

    2005-08-01

    Because a gravimeter records the sum of all gravity variations associated with mass redistribution in its near and far surrounding the investigation of a single special gravity effect (e.g. Earth tides or core modes) requires the reduction of all other effects from the data. In our study, we are dealing with the ocean loading effect. High-precision tidal gravity and atmospheric pressure observations are carried out at the station Rio Carpintero in combination with tide gauge measurements at the coast of Santiago de Cuba. The gravity data are subjected to atmospheric pressure and ocean loading corrections with different oceanic tidal models. In order to test the efficiency of the different ocean loading corrections the gravity data are analysed for various tidal waves and the determined Earth tide parameters are compared with model parameters. Additionally, tide gauge measurements are analysed and used for improving the ocean loading correction on gravity data. The results show that present-day global oceanic tidal models, e.g. NAO99b and FES2002 in combination with the ocean loading calculation program (LOAD97), are not sufficient for a complete correction of this effect. With our approach, the discrepancies between the observed Earth tide parameters and those from theoretical prediction for main waves in diurnal and semidiurnal tidal bands are further reduced when taking into account the tide gauge data recorded offshore. After additional removal of oceanic signals, based on the tide gauge data, the analysed Earth tide parameters are closer to the Wahr-Dehant model. The improvement is up to 4% and the noise is reduced from 20 nm/s 2 to 10 nm/s 2 within the examined period range of 10-1500 min. Therefore, high-precision gravity measurements (e.g. with Superconducting Gravimeters), especially for stations near the coastal lines, should take into account tide gauge measurements for the ocean loading correction. With improved ocean loading correction and reduced noise

  7. Development of ligase-assisted spacer addition for the measurement of microsatellites.

    PubMed

    Brockhurst, V; Barnard, R; Wolter, L; Giffard, P; Timms, P

    2001-07-01

    Conventional methods for detecting differences in microsatellite repeat lengths rely on electrophoretic fractionation on long denaturing polyacrylamide gels, a time-consuming and labor-intensive method. Therefore, there is a need for the development of new and rapid approaches to routinely detect such length polymorphisms. The advent of techniques allowing the coupling of DNA molecules to solid surfaces has provided new prospects in the area of mutation detection. We describe here the development and optimization of the ligase-assisted spacer addition (LASA) method, a novel and rapid procedure based on an ELISA format to measure microsatellite repeat lengths. The LASA assay was successfully applied to a set of 11 bird samples to assess its capabilities as a genotyping method. PMID:11464526

  8. 34 CFR 403.202 - What must each State's system of core standards and measures of performance include?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... by the Office of Management and Budget under Control No. 1830-0030) Cross Reference: See 34 CFR 400.6. ... 34 Education 3 2013-07-01 2013-07-01 false What must each State's system of core standards and measures of performance include? 403.202 Section 403.202 Education Regulations of the Offices of...

  9. 34 CFR 403.202 - What must each State's system of core standards and measures of performance include?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... by the Office of Management and Budget under Control No. 1830-0030) Cross Reference: See 34 CFR 400.6. ... 34 Education 3 2014-07-01 2014-07-01 false What must each State's system of core standards and measures of performance include? 403.202 Section 403.202 Education Regulations of the Offices of...

  10. Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics.

    PubMed

    John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D

    2016-04-01

    We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems. PMID:27176426

  11. Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics

    NASA Astrophysics Data System (ADS)

    John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D.

    2016-04-01

    We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems.

  12. Study Modules for Calculus-Based General Physics. [Includes Modules 1 and 2: Dimensions and Vector Addition; Rectilinear Motion; plus a Trigonometry and Calculus Review].

    ERIC Educational Resources Information Center

    Fuller, Robert G., Ed.; And Others

    This is part of a series of 42 Calculus Based Physics (CBP) modules totaling about 1,000 pages. The modules include study guides, practice tests, and mastery tests for a full-year individualized course in calculus-based physics based on the Personalized System of Instruction (PSI). The units are not intended to be used without outside materials;…

  13. Analysis of the laser powder bed fusion additive manufacturing process through experimental measurement and finite element modeling

    NASA Astrophysics Data System (ADS)

    Dunbar, Alexander Jay

    The objective in this work is to provide rigourous experimental measurements to aid in the development of laser powder bed fusion (LPBF) additive manufacturing (AM). A specialized enclosed instrumented measurement system is designed to provide in situ experimental measurements of temperature and distortion. Experiments include comparisons of process parameters, materials and LPBF machines. In situ measurements of distortion and temperature made throughout the build process highlight inter-layer distortion effects previously undocumented for laser powder bed fusion. Results from these experiments are also be implemented in the development and validation of finite element models of the powder bed build process. Experimental analysis is extended from small-scale to larger part-scale builds where experimental post-build measurements are used in analysis of distortion profiles. Experimental results provided from this study are utilized in the validation of a finite element model capable of simulating production scale parts. The validated finite element model is then implemented in the analysis of the part to provide information regarding the distortion evolution process. A combination of experimental measurements and simulation results are used to identify the mechanism that results in the measured distortion profile for this geometry. Optimization of support structure primarily focuses on the minimization of material use and scan time, but no information regarding failure criteria for support structure is available. Tensile test samples of LPBF built support structure are designed, built, and tested to provide measurements of mechanical properties of the support structure. Experimental tests show that LPBF built support structure has only 30-40% of the ultimate tensile strength of solid material built in the same machine. Experimental measurement of LPBF built support structure provides clear failure criteria to be utilized in the future design and implementation of

  14. Non-additivity of molecule-surface van der Waals potentials from force measurements

    PubMed Central

    Wagner, Christian; Fournier, Norman; Ruiz, Victor G.; Li, Chen; Müllen, Klaus; Rohlfing, Michael; Tkatchenko, Alexandre; Temirov, Ruslan; Tautz, F. Stefan

    2014-01-01

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Despite being weak on an atomic level, they substantially influence molecular and biological systems due to their long range and system-size scaling. The difficulty to isolate and measure vdW forces on a single-molecule level causes our present understanding to be strongly theory based. Here we show measurements of the attractive potential between differently sized organic molecules and a metal surface using an atomic force microscope. Our choice of molecules and the large molecule-surface separation cause this attraction to be purely of vdW type. The experiment allows testing the asymptotic vdW force law and its validity range. We find a superlinear growth of the vdW attraction with molecular size, originating from the increased deconfinement of electrons in the molecules. Because such non-additive vdW contributions are not accounted for in most first-principles or empirical calculations, we suggest further development in that direction. PMID:25424490

  15. Non-additivity of molecule-surface van der Waals potentials from force measurements.

    PubMed

    Wagner, Christian; Fournier, Norman; Ruiz, Victor G; Li, Chen; Müllen, Klaus; Rohlfing, Michael; Tkatchenko, Alexandre; Temirov, Ruslan; Tautz, F Stefan

    2014-11-26

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Despite being weak on an atomic level, they substantially influence molecular and biological systems due to their long range and system-size scaling. The difficulty to isolate and measure vdW forces on a single-molecule level causes our present understanding to be strongly theory based. Here we show measurements of the attractive potential between differently sized organic molecules and a metal surface using an atomic force microscope. Our choice of molecules and the large molecule-surface separation cause this attraction to be purely of vdW type. The experiment allows testing the asymptotic vdW force law and its validity range. We find a superlinear growth of the vdW attraction with molecular size, originating from the increased deconfinement of electrons in the molecules. Because such non-additive vdW contributions are not accounted for in most first-principles or empirical calculations, we suggest further development in that direction.

  16. A new life for a 10-year old MueTec2010 CD measurement system: the ultimate precision upgrade with additional film thickness measurement capability

    NASA Astrophysics Data System (ADS)

    Cassol, Gian Luca; Bianucci, Giovanni; Murai, Shiaki; Falk, Günther; Scheuring, Gerd; Döbereiner, Stefan; Brück, Hans-Jürgen

    2006-06-01

    A 10-year old MueTec2010, white light CD measurement system, installed at DNP Photomask Europe and previously owned by STMicroelectronics, has been upgraded to fulfill the high-end optical CD measurement requirements, and to add the film thickness measurement capability. That is the ultimate upgrade, consisting of two new computers with WINDOWS 2000 operating system, a new 150X measurement objective, a new 16-bit CCD digital camera, a new tube lens for the old Leica Ergoplan microscope, and the NanoStar software with the pattern recognition option. The upgrade yielded an average 45% repeatability improvement for isolated and dense lines and spaces, with 1.2nm average repeatability in a 0.3-10μm CD nominal range. Contact holes report an average 50% repeatability improvement, with 2.5nm average repeatability. The improved precision allows a +/-2-nm CD calibration and correlation down to 0.4μm CD nominal. Overall, the upgraded MueTec2010 shows same or better performance than the already installed Leica LWM250UV CD measurement system, despite the longer illumination wavelength of the former. The improved short and long term repeatability reduced the Gauge RandR figure from 24% to 11% at +/-20nm tolerance, which qualifies the system for high-end binary mask down to 0.5μm CD nominal. The feasibility to calibrate the system for 248nm Molybdenum Silicide Phase Shifting Masks is currently being investigated. In addition to that, the new measurement algorithms, the capability to take multiple measurements within the FOV, and the pattern recognition capability included in the NanoStar software gave a 75% throughput boost to the fully automated macros for the weekly calibration tests of the laser writing tools, compared to the LWM250UV run time. With little additional hardware and software, the system has also been upgraded to include the film thickness measurement capability for the PSM resist coating process (2nd exposure), without the need for a dedicated, more expensive

  17. Localization of eight additional genes in the human major histocompatibility complex, including the gene encoding the casein kinase II {beta} subunit (CSNK2B)

    SciTech Connect

    Albertella, M.R.; Jones, H.; Thomson, W.

    1996-09-01

    A wide range of autoimmune and other diseases are known to be associated with the major histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility antigens in the class I and class II regions, but some appear to be more strongly associated with genes in the central 1100-kb class III region, making it important to characterize this region fully for the presence of novel genes. An {approximately}220-kb segment of DNA in the class III region separating the Hsp70 (HSPA1L) and BAT1 (D6S8IE) genes, which was previously known to contain 14 genes. Genomic DNA fragments spanning the gaps between the known genes were used as probes to isolate cDNAs corresponding to five new genes within this region. Evidence from Northern blot analysis and exon trapping experiments that suggested the presence of at least two more new genes was also obtained. Partial cDNA and complete exonic genomic sequencing of one of the new genes has identified it as the casein kinase II{beta} subunit (CSNK2B). Two of the other novel genes lie within a region syntenic to that implicated in susceptibility to experimental allergic orchitis in the mouse, an autoimmune disease of the testis, and represent additional candidates for the Orch-1 locus associated with this disease. In addition, characterization of the 13-kb intergenic gap separating the RD (D6545) and G11 (D6S60E) genes has revealed the presence of a gene encoding a 1246-amino-acid polypeptide that shows significant sequence similarity to the yeast anti-viral Ski2p gene product. 49 refs., 8 figs.

  18. Petrographic and Geochemical Characterization of Ore-Bearing Intrusions of the Noril'sk type, Siberia; With Discussion of Their Origin, Including Additional Datasets and Core Logs

    USGS Publications Warehouse

    Czamanske, Gerald K.

    2002-01-01

    The Noril'sk I, Talnakh, and Kharaelakh intrusions of the Noril'sk district host one of the outstanding metal concentrations in the world; contained Cu-Ni resources are comparable to the deposits at Sudbury, Ontario and the platinum group element (PGE) resource is second only to that of the Bushveld Complex. Our opportunity to cooperatively sample and study this district in Siberian Russia arose in 1990 through a memorandum of understanding between the U.S. Geological Survey and the former Ministry of Geology of the U.S.S.R. The world-class significance of these deposits and the possibility that understanding their geologic context, including construction of a credible 'ore-deposit model,' will lead to discovery of similar deposits elsewhere, inspired extensive studies of the ores, the mafic-intrusions which host them, and associated flood basalts.

  19. Uranium hydrogeochemical and stream sediment reconnaissance of the Dalhart NTMS quadrangle, New Mexico/Texas/Oklahoma, including concentrations of forty-two additional elements

    SciTech Connect

    Morgan, T.L.

    1980-08-01

    Totals of 1583 water samples and 503 sediment samples were collected from 2028 locations within the 20 000-km/sup 2/ area of the quadrangle at an average density of one location per 9.86 km/sup 2/. Water samples were collected from wells, springs, and streams and were analyzed for uranium. Sediment samples were collected from streams and springs and were analyzed for uranium, thorium, and 41 additional elements. All field and analytical data are listed in the appendixes of this report. Discussion is limited to anomalous samples, which are considered to be those containing over 20 ppB uranium for waters and over 5 ppM uranium for sediments. Uranium concentrations in water samples range from below the detection limit of 0.2 ppB to 1457.65 ppB and average 7.41 ppB. Most of the seventy anomalous water samples (4.4% of all water samples) are grouped spatially into five clusters or areas of interest. Samples in three of the clusters were collected along the north edge of the quadrangle where Mesozoic strata are exposed. The other two clusters are from the central and southern portions where the Quaternary Ogallala formation is exposed. Sediment samples from the quadrangle have uranium concentrations that range from 0.90 ppM to 27.20 ppM and average 3.27 ppM. Fourteen samples (2.8% of all sediment samples) contain over 5 ppM uranium and are considered anomalous. The five samples with the highest concentrations occur where downcutting streams expose Cretaceous units beneath the Quaternary surficial deposits. The remaining anomalous sediment samples were collected from scattered locations and do not indicate any single formation or unit as a potential source for the anomalous concentrations.

  20. Nitrate removal in stream ecosystems measured by 15N addition experiments: 2. Denitrification

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Sobota, Daniel; Dodds, Walter; Findlay, Stuart; Grimm, Nancy; Hamilton, Stephen; McDowell, William; O'Brien, Jon; Tank, Jennifer; Ashkenas, Linda; Cooper, Lee W; Dahm, Cliff; Gregory, Stanley; Johnson, Sherri; Meyer, Judy; Peterson, Bruce; Poole, Geoff; Valett, H. Maurice; Webster, Jackson; Arango, Clay; Beaulieu, Jake; Bernot, Melody; Burgin, Amy; Crenshaw, Chelsea; Helton, Ashley; Johnson, Laura; Niederlehner, Bobbie; Potter, Jody; Sheibley, Rich; Thomas, Suzanne

    2009-01-01

    We measured denitrification rates using a field {sup 15}N-NO{sub 3}{sup -} tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (S{sub Wden}) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N{sub 2} production rates far exceeded N{sub 2}O production rates in all streams. The fraction of total NO{sub 3}{sup -} removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NH{sub 4}{sup +} concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling S{sub Wden} were specific discharge (discharge/width) and NO{sub 3}{sup -} concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (U{sub den}) and NO{sub 3}{sup -} concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although U{sub den} increased with increasing NO{sub 3}{sup -} concentration, the efficiency of NO{sub 3}{sup -} removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO{sub 3}{sup -} load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO{sub 3}{sup -} concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO{sub 3}{sup -} concentration.

  1. Modeling particulate matter concentrations measured through mobile monitoring in a deletion/substitution/addition approach

    NASA Astrophysics Data System (ADS)

    Su, Jason G.; Hopke, Philip K.; Tian, Yilin; Baldwin, Nichole; Thurston, Sally W.; Evans, Kristin; Rich, David Q.

    2015-12-01

    Land use regression modeling (LUR) through local scale circular modeling domains has been used to predict traffic-related air pollution such as nitrogen oxides (NOX). LUR modeling for fine particulate matters (PM), which generally have smaller spatial gradients than NOX, has been typically applied for studies involving multiple study regions. To increase the spatial coverage for fine PM and key constituent concentrations, we designed a mobile monitoring network in Monroe County, New York to measure pollutant concentrations of black carbon (BC, wavelength at 880 nm), ultraviolet black carbon (UVBC, wavelength at 3700 nm) and Delta-C (the difference between the UVBC and BC concentrations) using the Clarkson University Mobile Air Pollution Monitoring Laboratory (MAPL). A Deletion/Substitution/Addition (D/S/A) algorithm was conducted, which used circular buffers as a basis for statistics. The algorithm maximizes the prediction accuracy for locations without measurements using the V-fold cross-validation technique, and it reduces overfitting compared to other approaches. We found that the D/S/A LUR modeling approach could achieve good results, with prediction powers of 60%, 63%, and 61%, respectively, for BC, UVBC, and Delta-C. The advantage of mobile monitoring is that it can monitor pollutant concentrations at hundreds of spatial points in a region, rather than the typical less than 100 points from a fixed site saturation monitoring network. This research indicates that a mobile saturation sampling network, when combined with proper modeling techniques, can uncover small area variations (e.g., 10 m) in particulate matter concentrations.

  2. Nitrate removal in stream ecosystems measured by 15N addition experiments: Denitrification

    USGS Publications Warehouse

    Mulholland, P.J.; Hall, R.O.; Sobota, D.J.; Dodds, W.K.; Findlay, S.E.G.; Grimm, N. B.; Hamilton, S.K.; McDowell, W.H.; O'Brien, J. M.; Tank, J.L.; Ashkenas, L.R.; Cooper, L.W.; Dahm, Clifford N.; Gregory, S.V.; Johnson, S.L.; Meyer, J.L.; Peterson, B.J.; Poole, G.C.; Valett, H.M.; Webster, J.R.; Arango, C.P.; Beaulieu, J.J.; Bernot, M.J.; Burgin, A.J.; Crenshaw, C.L.; Helton, A.M.; Johnson, L.T.; Niederlehner, B.R.; Potter, J.D.; Sheibley, R.W.; Thomasn, S.M.

    2009-01-01

    We measured denitrification rates using a field 15N-NO- 3 tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (SWden) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N2 production rates far exceeded N2O production rates in all streams. The fraction of total NO-3 removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NHz 4 concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling SWden were specific discharge (discharge / width) and NO-3 concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (Uden) and NO- 3 concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although Uden increased with increasing NO- 3 concentration, the efficiency of NO-3 removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO-3 load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO-3 concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO-3 concentration. ?? 2009.

  3. Systems and methods for measuring a parameter of a landfill including a barrier cap and wireless sensor systems and methods

    DOEpatents

    Kunerth, Dennis C.; Svoboda, John M.; Johnson, James T.

    2007-03-06

    A method of measuring a parameter of a landfill including a cap, without passing wires through the cap, includes burying a sensor apparatus in the landfill prior to closing the landfill with the cap; providing a reader capable of communicating with the sensor apparatus via radio frequency (RF); placing an antenna above the barrier, spaced apart from the sensor apparatus; coupling the antenna to the reader either before or after placing the antenna above the barrier; providing power to the sensor apparatus, via the antenna, by generating a field using the reader; accumulating and storing power in the sensor apparatus; sensing a parameter of the landfill using the sensor apparatus while using power; and transmitting the sensed parameter to the reader via a wireless response signal. A system for measuring a parameter of a landfill is also provided.

  4. Evaluation and study of advanced optical contamination, deposition, measurement, and removal techniques. [including computer programs and ultraviolet reflection analysis

    NASA Technical Reports Server (NTRS)

    Linford, R. M. F.; Allen, T. H.; Dillow, C. F.

    1975-01-01

    A program is described to design, fabricate and install an experimental work chamber assembly (WCA) to provide a wide range of experimental capability. The WCA incorporates several techniques for studying the kinetics of contaminant films and their effect on optical surfaces. It incorporates the capability for depositing both optical and contaminant films on temperature-controlled samples, and for in-situ measurements of the vacuum ultraviolet reflectance. Ellipsometer optics are mounted on the chamber for film thickness determinations, and other features include access ports for radiation sources and instrumentation. Several supporting studies were conducted to define specific chamber requirements, to determine the sensitivity of the measurement techniques to be incorporated in the chamber, and to establish procedures for handling samples prior to their installation in the chamber. A bibliography and literature survey of contamination-related articles is included.

  5. Quantification of β-region IgA monoclonal proteins - should we include immunochemical Hevylite® measurements? Point.

    PubMed

    Evans, Josie A R; Jenner, Ellen L; Carr Smith, Hugh D; Berlanga, Oscar; Harding, Stephen J

    2016-06-01

    Accurate measurement of IgA monoclonal proteins presents a significant challenge to laboratory staff. IgA heavy/light chain (Hevylite, HLC) analysis is an alternative methodology for monoclonal protein assessment, giving an independent measure of IgAκ and IgAλ concentrations. Clonality is assessed by calculating the ratio of involved immunoglobulin to background uninvolved immunoglobulin concentrations (e.g. IgAκ/IgAλ in an IgAκ patient). Here we discuss the challenges faced by the laboratory in IgA monoclonal protein assessment, and compare the performance of Hevylite assays with electrophoresis and total IgA results. We present data which validates the use of Hevylite for response assessment: in most cases, Hevylite provides comparable response assignment to that provided by serum protein electrophoresis (SPE) and total IgA; in other cases Hevylite provides additional information, such as detection of residual disease or relapse.

  6. Stability enhancement of an atomic force microscope for long-term force measurement including cantilever modification for whole cell deformation.

    PubMed

    Weafer, P P; McGarry, J P; van Es, M H; Kilpatrick, J I; Ronan, W; Nolan, D R; Jarvis, S P

    2012-09-01

    Atomic force microscopy (AFM) is widely used in the study of both morphology and mechanical properties of living cells under physiologically relevant conditions. However, quantitative experiments on timescales of minutes to hours are generally limited by thermal drift in the instrument, particularly in the vertical (z) direction. In addition, we demonstrate the necessity to remove all air-liquid interfaces within the system for measurements in liquid environments, which may otherwise result in perturbations in the measured deflection. These effects severely limit the use of AFM as a practical tool for the study of long-term cell behavior, where precise knowledge of the tip-sample distance is a crucial requirement. Here we present a readily implementable, cost effective method of minimizing z-drift and liquid instabilities by utilizing active temperature control combined with a customized fluid cell system. Long-term whole cell mechanical measurements were performed using this stabilized AFM by attaching a large sphere to a cantilever in order to approximate a parallel plate system. An extensive examination of the effects of sphere attachment on AFM data is presented. Profiling of cantilever bending during substrate indentation revealed that the optical lever assumption of free ended cantilevering is inappropriate when sphere constraining occurs, which applies an additional torque to the cantilevers "free" end. Here we present the steps required to accurately determine force-indentation measurements for such a scenario. Combining these readily implementable modifications, we demonstrate the ability to investigate long-term whole cell mechanics by performing strain controlled cyclic deformation of single osteoblasts.

  7. Non-additivity of molecule-surface van der Waals potentials from force measurements

    NASA Astrophysics Data System (ADS)

    Tautz, Stefan

    2014-03-01

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Their description as an inherently quantum mechanical phenomenon was developed for single atoms and homogeneous macroscopic bodies by London, Casimir, and Lifshitz. For intermediate-sized objects like organic molecules an atomistic description is required, but explicit first principles calculations are very difficult since correlations between many interacting electrons have to be considered. Hence, semi-empirical correction schemes are often used that simplify the vdW interaction to a sum over atom-pair potentials. A similar gap exists between successful measurements of vdW and Casimir forces for single atoms on the one hand and macroscopic bodies on the other, as comparable experiments for molecules are absent. I will present experiments in which long-range vdW potentials between a series of related molecules and a metal surface have been determined experimentally. The experiments rely on the extremely sensitive force detection of an atomic force microscope in combination with its molecular manipulation capabilities. The results allow us to confirm the asymptotic force law and to quantify the non-additive part of the vdW interaction which is particularly challenging for theory. In the present case, cooperative effects account for 10% of the total interaction. This effect is of general validity in molecules and thus relevant at the intersection of chemistry, physics, biology, and materials science.

  8. A Statistical Review of DWPF Laboratory Data Including Measurements of the ARG-1 Standard for Batches 94 - 263.

    SciTech Connect

    THOMAS, EDWARDS

    2004-11-30

    Measurements of calibration and bench standards as well as samples of ARG-1 that were performed by the DWPF Lab during the processing of batches 94 through 263 were provided to SCS for review. Three datasets, one associated with each of three preparation methods (Cold Chem, Mixed Acid, and Fusion) were included in the review. The review conducted covered several areas of investigation. Biases in these measurements relative to the reference values for the standards including ARG-1 were estimated and found to be of no practical concern. Percent relative standard deviations for these data also were determined. Sources of variation in the measurements (i.e., batch-to-batch and within process batch) were estimated and compared. An investigation into evidence of instrument drift during a group of measurements representing a prototypical block was conducted for each preparation method using pairs of calibration and bench standards. No evidence of instrument drift at levels of practical concern was seen in these data. Also, the replicates of calibration standards at the beginning of each analytical block were found to be unnecessary. The uncertainties of the measurements, which incorporated biases and precision errors, were computed for the calibration standards, bench standards, and ARG-1. The limits for these uncertainties were compared to the current, LIMS operating limits for the errors in the measurements of these standards. These comparisons may provide opportunities for revising the LIMS limits. Comparisons between MFT and SME results were made for both the Mixed Acid and the Fusion prep methods. There was no evidence of differences (in either bias or precision) between the results for these two tanks for either of the two prep methods.

  9. Does the anti-prothrombin antibodies measurement provide additional information in patients with thrombosis?

    PubMed

    Bardin, Nathalie; Alessi, Marie Christine; Dignat-George, Francoise; Vague, Irene Juhan; Sampol, Jose; Harlé, Jean Robert; Sanmarco, Marielle

    2007-01-01

    The aim of this study is to get new insight into the relevance of IgG anti-prothrombin antibodies in patients with thrombosis and to determine whether human prothrombin alone (aPT) or complexed to phosphatidylserine (aPS/PT) should be preferentially used for measuring these antibodies by enzyme-linked immunosorbent assay (ELISA). To this end, prevalence of anti-prothrombin antibodies, their characteristics in terms of avidity and heterogeneity, and their relationship with anti-beta2 glycoprotein I antibodies (abeta2GPI) were studied in 152 patients with thrombosis. Patients were divided into two groups according to the presence or absence of antiphospholipid antibodies (aPL), called aPL+ or aPL-, respectively. In the aPL- group (n=90), the prevalence of anti-prothrombin antibodies was substantial (10%) but not significantly different from that of control (5%). In the aPL+ group (n=62), lupus anticoagulant (LA) or anticardiolipin antibodies (aCL) positive, 61% were positive for anti-prothrombin antibodies with no statistical difference between aPT and aPS/PT prevalence (42% vs. 55%, respectively). In the whole thrombotic population, 19% were only aPT and 34% only aPS/PT suggesting the presence of different antibodies. Absorption experiments confirmed the heterogeneity of aPT and aPS/PT. No difference in their avidity was demonstrated. From the aPL+ group, 60 were LA positive. Among them, 18% were negative for abeta2GPI and anti-prothrombin antibodies showing that the detection of these antibodies could not substitute for LA determination. In conclusion, our data show that the screening of the different anti-prothrombin antibodies is not warranted in the aPL+ group since these antibodies do not provide additional information compared to aCL, LA and/or abeta2GPI measurement. Nevertheless, the substantial prevalence of anti-prothrombin antibodies in the aPL- group should be further explored in a large prospective study. PMID:17678713

  10. Effect of silica fume addition on the PGNAA measurement of chlorine in concrete.

    PubMed

    Naqvi, A A; Maslehuddin, M; Garwan, M A; Nagadi, M M; Al-Amoudi, O S B; Raashid, M; Khateeb-ur-Rehman

    2010-03-01

    Pozzolanic materials, such as fly ash (FA), silica fume (SF), and blast furnace slag (BFS) are added to Portland cement in concrete to prevent reinforcement steel corrosion in concrete. Further preventive measure against reinforcement steel corrosion require monitoring of chloride salts concentration in concrete using non-destructive techniques, such as the prompt gamma-ray neutron activation analysis (PGNAA) technique. Due to interferences between gamma-rays from chlorine and calcium in PGNAA technique, detection limit of chlorine in concrete strongly depends upon calcium concentration in concrete. SF mainly contains silica and its addition to cement concrete reduces overall concentration of calcium in concrete. This may result in an improvement in detection limit of chlorine in SF-based concrete in PGNAA studies. Particularly for chlorine detection using 6.11 and 6.62 MeV prompt gamma-rays that strongly interfere with 6.42 MeV prompt gamma-rays from calcium. In this study, SF was added to Portland cement to prevent concrete reinforcement steel from corrosion. The chlorine concentration in SF cement concrete specimens containing 0.2-3.0 wt% chlorine was measured through yield of 1.16, 1.95, 6.11, 6.62, 7.41, 7.79, and 8.58 MeV chlorine gamma-rays using PGNAA technique. An excellent agreement was noted between the experimental yield of the prompt gamma-rays and the gamma-ray yield calculated through the Monte Carlo simulations. Further the minimum detectable concentration (MDC) of chlorine in SF cement concrete was calculated and compared with the MDC values of chlorine in plain concrete and concrete mixed with fly ash cement. The MDC of chlorine in SF-based concrete through 6.11 MeV, and 6.62 MeV chlorine gamma-rays was found to be improved as compared to those in plain concrete and concrete mixed with fly ash cement. PMID:20042342

  11. Ocular accommodation and cognitive demand: An additional indicator besides pupil size and cardiovascular measures?

    PubMed Central

    Jainta, Stephanie; Hoormann, Joerg; Jaschinski, Wolfgang

    2008-01-01

    Background The aim of the present study was to assess accommodation as a possible indicator of changes in the autonomic balance caused by altered cognitive demand. Accounting for accommodative responses from a human factors perspective may be motivated by the interest of designing virtual image displays or by establishing an autonomic indicator that allows for remote measurement at the human eye. Heart period, pulse transit time, and the pupillary response were considered as reference for possible closed-loop accommodative effects. Cognitive demand was varied by presenting monocularly numbers at a viewing distance of 5 D (20 cm) which had to be read, added or multiplied; further, letters were presented in a "n-back" task. Results Cardiovascular parameters and pupil size indicated a change in autonomic balance, while error rates and reaction time confirmed the increased cognitive demand during task processing. An observed decrease in accommodation could not be attributed to the cognitive demand itself for two reasons: (1) the cognitive demand induced a shift in gaze direction which, for methodological reasons, accounted for a substantial part of the observed accommodative changes. (2) Remaining effects disappeared when the correctness of task processing was taken into account. Conclusion Although the expectation of accommodation as possible autonomic indicator of cognitive demand was not confirmed, the present results are informative for the field of applied psychophysiology noting that it seems not to be worthwhile to include closed-loop accommodation in future studies. From a human factors perspective, expected changes of accommodation due to cognitive demand are of minor importance for design specifications – of, for example, complex visual displays. PMID:18721478

  12. A study of the physical, behavioral, and medical phenotype, including anthropometric measures, of females with fragile X syndrome.

    PubMed

    Hull, C; Hagerman, R J

    1993-11-01

    The physical features of fragile X, including a long face, prominent ears, and hyperextensible joints, are present in affected males and females. Cytogenetically negative heterozygotes have been considered to be unaffected by the fragile X mental retardation-1 (FMR-1) gene. This study investigated the penetrance of the FMR-1 gene in cytogenetically negative but DNA-positive heterozygotes with a premutation (cytosine guanine guanine [CGG] amplification in the 50 to 200 repeat range), compared with carriers with a full mutation (> 200 CGG repeats) and control subjects. One hundred thirty-nine women with normal IQs between the ages of 18 and 45 years were studied. All underwent cytogenetic and DNA testing to determine their fragile X carrier status. A medical history-taking and a physical examination, including selected anthropometric measurements, were performed. Results indicate that the FMR-1 mutation mildly affects the physical phenotype of individuals even in the premutation state, although less dramatically than more affected heterozygotes. Carriers with a premutation differed significantly from control subjects in overall physical index score and in the anthropometric measure of ear prominence. These results suggest a phenotypic impact of the FMR-1 mutation even at the 50 to 200 CGG repeat length.

  13. a Measuring System with AN Additional Channel for Eliminating the Dynamic Error

    NASA Astrophysics Data System (ADS)

    Dichev, Dimitar; Koev, Hristofor; Louda, Petr

    2014-03-01

    The present article views a measuring system for determining the parameters of vessels. The system has high measurement accuracy when operating in both static and dynamic mode. It is designed on a gyro-free principle for plotting a vertical. High accuracy of measurement is achieved by using a simplified design of the mechanical module as well by minimizing the instrumental error. A new solution for improving the measurement accuracy in dynamic mode is offered. The approach presented is based on a method where the dynamic error is eliminated in real time, unlike the existing measurement methods and tools where stabilization of the vertical in the inertial space is used. The results obtained from the theoretical experiments, which have been performed on the basis of the developed mathematical model, demonstrate the effectiveness of the suggested measurement approach.

  14. Alternative Medications for Medications Included in the Use of High-Risk Medications in the Elderly and Potentially Harmful Drug–Disease Interactions in the Elderly Quality Measures

    PubMed Central

    Hanlon, Joseph T.; Semla, Todd P.; Schmader, Kenneth E.

    2016-01-01

    The National Committee for Quality Assurance (NCQA) and the Pharmacy Quality Alliance (PQA) use the American Geriatrics Society (AGS) Beers Criteria to designate the quality measure Use of High-Risk Medications in the Elderly (HRM). The Centers for Medicare and Medicaid Services (CMS) use the HRM measure to monitor and evaluate the quality of care provided to Medicare beneficiaries. NCQA additionally uses the AGS Beers Criteria to designate the quality measure Potentially Harmful Drug–Disease Interactions in the Elderly. Medications included in these measures may be harmful to elderly adults, negatively affect a health care plan’s quality ratings, and be denied as a health care plan drug benefit. Prescribers, pharmacists, patients, and health care plans may benefit from evidence-based alternative medication treatments to avoid these problems. Therefore the goal of this work was to develop a list of alternative medications to those included in the two measures. The authors conducted a comprehensive literature review for 2000 to 2014 and a search of their personal files. From the evidence, they prepared a list of drug-therapy alternatives with supporting references. A reference list of non-pharmacological approaches was also provided when appropriate. NCQA, PQA, the 2015 AGS Beers Criteria panel, and the Executive Committee of the AGS reviewed the drug therapy alternatives and nonpharmacological approaches. Recommendations by these groups were incorporated into the final list of alternatives. The final product of drug-therapy alternatives to medications included in the two quality measures and some nonpharmacological resources will be useful to health professionals, consumers, payers, and health systems that care for older adults. PMID:26447889

  15. CMAQ model performance enhanced when in-cloud secondary organic aerosol is included: comparisons of organic carbon predictions with measurements.

    PubMed

    Carlton, Annmarie G; Turpin, Barbara I; Altieri, Katye E; Seitzinger, Sybil P; Mathur, Rohit; Roselle, Shawn J; Weber, Rodney J

    2008-12-01

    Mounting evidence suggests that low-volatility (particle-phase) organic compounds form in the atmosphere through aqueous phase reactions in clouds and aerosols. Although some models have begun including secondary organic aerosol (SOA) formation through cloud processing, validation studies that compare predictions and measurements are needed. In this work, agreement between modeled organic carbon (OC) and aircraft measurements of water soluble OC improved for all 5 of the compared ICARTT NOAA-P3 flights during August when an in-cloud SOA (SOAcld) formation mechanism was added to CMAQ (a regional-scale atmospheric model). The improvement was most dramatic for the August 14th flight, a flight designed specifically to investigate clouds. During this flight the normalized mean bias for layer-averaged OC was reduced from -64 to -15% and correlation (r) improved from 0.5 to 0.6. Underpredictions of OC aloft by atmospheric models may be explained, in part, by this formation mechanism (SOAcld). OC formation aloft contributes to long-range pollution transport and has implications to radiative forcing, regional air quality and climate. PMID:19192800

  16. CMAQ model performance enhanced when in-cloud secondary organic aerosol is included: comparisons of organic carbon predictions with measurements.

    PubMed

    Carlton, Annmarie G; Turpin, Barbara I; Altieri, Katye E; Seitzinger, Sybil P; Mathur, Rohit; Roselle, Shawn J; Weber, Rodney J

    2008-12-01

    Mounting evidence suggests that low-volatility (particle-phase) organic compounds form in the atmosphere through aqueous phase reactions in clouds and aerosols. Although some models have begun including secondary organic aerosol (SOA) formation through cloud processing, validation studies that compare predictions and measurements are needed. In this work, agreement between modeled organic carbon (OC) and aircraft measurements of water soluble OC improved for all 5 of the compared ICARTT NOAA-P3 flights during August when an in-cloud SOA (SOAcld) formation mechanism was added to CMAQ (a regional-scale atmospheric model). The improvement was most dramatic for the August 14th flight, a flight designed specifically to investigate clouds. During this flight the normalized mean bias for layer-averaged OC was reduced from -64 to -15% and correlation (r) improved from 0.5 to 0.6. Underpredictions of OC aloft by atmospheric models may be explained, in part, by this formation mechanism (SOAcld). OC formation aloft contributes to long-range pollution transport and has implications to radiative forcing, regional air quality and climate.

  17. Including quality attributes in efficiency measures consistent with net benefit: creating incentives for evidence based medicine in practice.

    PubMed

    Eckermann, Simon; Coelli, Tim

    2013-01-01

    Evidence based medicine supports net benefit maximising therapies and strategies in processes of health technology assessment (HTA) for reimbursement and subsidy decisions internationally. However, translation of evidence based medicine to practice is impeded by efficiency measures such as cost per case-mix adjusted separation in hospitals, which ignore health effects of care. In this paper we identify a correspondence method that allows quality variables under control of providers to be incorporated in efficiency measures consistent with maximising net benefit. Including effects framed from a disutility bearing (utility reducing) perspective (e.g. mortality, morbidity or reduction in life years) as inputs and minimising quality inclusive costs on the cost-disutility plane is shown to enable efficiency measures consistent with maximising net benefit under a one to one correspondence. The method combines advantages of radial properties with an appropriate objective of maximising net benefit to overcome problems of inappropriate objectives implicit with alternative methods, whether specifying quality variables with utility bearing output (e.g. survival, reduction in morbidity or life years), hyperbolic or exogenous variables. This correspondence approach is illustrated in undertaking efficiency comparison at a clinical activity level for 45 Australian hospitals allowing for their costs and mortality rates per admission. Explicit coverage and comparability conditions of the underlying correspondence method are also shown to provide a robust framework for preventing cost-shifting and cream-skimming incentives, with appropriate qualification of analysis and support for data linkage and risk adjustment where these conditions are not satisfied. Comparison on the cost-disutility plane has previously been shown to have distinct advantages in comparing multiple strategies in HTA, which this paper naturally extends to a robust method and framework for comparing efficiency of

  18. The effect of slurry treatment including ozonation on odorant reduction measured by in-situ PTR-MS

    NASA Astrophysics Data System (ADS)

    Liu, Dezhao; Feilberg, Anders; Adamsen, Anders P. S.; Jonassen, Kristoffer E. N.

    2011-07-01

    The emission of odorous compounds from intensive pig production facilities is a nuisance for neighbors. Slurry ozonation for odor abatement has previously been demonstrated in laboratory scale. In this study, the effect of slurry ozonation (combined with solid-liquid pre-separation and acidification) on emissions of odorous compounds was tested in an experimental full-scale growing pig facility using Proton-Transfer-Reaction Mass Spectrometry (PTR-MS) for online analysis of odorants. The measurements were performed to gain a better understanding of the effects of ozone treatment on emissions odorous compounds and to identify potential options for optimization of ozone treatment. The compounds monitored included volatile sulfur compounds, amine, carboxylic acids, ketones, phenols and indoles. Measurements were performed during nearly a one-month period in summertime. The compounds with the highest concentrations observed in the ventilation exhaust duct were acetic acid, hydrogen sulfide, propanoic acid and butanoic acid. The compounds with the highest removal efficiencies were hydrogen sulfide, 3-methyl-indole, phenol and acetic acid. Based on odor threshold values, methanethiol, butanoic acid, 4-methylphenol, hydrogen sulfide and C 5 carboxylic acids are estimated to contribute significantly to the odor nuisance. Emissions of odorous compounds were observed to be strongly correlated with temperature with the exception of hydrogen sulfide. Emission peaks of sulfur compounds were seen during slurry handling activities. Discharging of the slurry pit led to reduced hydrogen sulfide emissions, but emissions of most other odorants were not affected. The results indicate that emissions of odorants other than hydrogen sulfide mainly originate from sources other than the treated slurry, which limits the potential for further optimization. The PTR-MS measurements are demonstrated to provide a quantitative, accurate and detailed evaluation of ozone treatment for emission

  19. Including quality attributes in efficiency measures consistent with net benefit: creating incentives for evidence based medicine in practice.

    PubMed

    Eckermann, Simon; Coelli, Tim

    2013-01-01

    Evidence based medicine supports net benefit maximising therapies and strategies in processes of health technology assessment (HTA) for reimbursement and subsidy decisions internationally. However, translation of evidence based medicine to practice is impeded by efficiency measures such as cost per case-mix adjusted separation in hospitals, which ignore health effects of care. In this paper we identify a correspondence method that allows quality variables under control of providers to be incorporated in efficiency measures consistent with maximising net benefit. Including effects framed from a disutility bearing (utility reducing) perspective (e.g. mortality, morbidity or reduction in life years) as inputs and minimising quality inclusive costs on the cost-disutility plane is shown to enable efficiency measures consistent with maximising net benefit under a one to one correspondence. The method combines advantages of radial properties with an appropriate objective of maximising net benefit to overcome problems of inappropriate objectives implicit with alternative methods, whether specifying quality variables with utility bearing output (e.g. survival, reduction in morbidity or life years), hyperbolic or exogenous variables. This correspondence approach is illustrated in undertaking efficiency comparison at a clinical activity level for 45 Australian hospitals allowing for their costs and mortality rates per admission. Explicit coverage and comparability conditions of the underlying correspondence method are also shown to provide a robust framework for preventing cost-shifting and cream-skimming incentives, with appropriate qualification of analysis and support for data linkage and risk adjustment where these conditions are not satisfied. Comparison on the cost-disutility plane has previously been shown to have distinct advantages in comparing multiple strategies in HTA, which this paper naturally extends to a robust method and framework for comparing efficiency of

  20. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.935 What additional preventive and mitigative... capabilities, the type of gas being transported, operating pressure, the rate of potential release,...

  1. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and train schedules and rates, park-and-ride facilities, and other transportation programs and... available by the Massachusetts Bay Transportation Authority, including the use of Massport as a...

  2. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  3. Review on measurement techniques of transport properties of nanowires Additions and Corrections. See DOI:10.1039/C3NR03242F Click here for additional data file.

    PubMed Central

    Rojo, Miguel Muñoz; Calero, Olga Caballero; Lopeandia, A. F.; Rodriguez-Viejo, J.

    2013-01-01

    Physical properties at the nanoscale are novel and different from those in bulk materials. Over the last few decades, there has been an ever growing interest in the fabrication of nanowire structures for a wide variety of applications including energy generation purposes. Nevertheless, the study of their transport properties, such as thermal conductivity, electrical conductivity or Seebeck coefficient, remains an experimental challenge. For instance, in the particular case of nanostructured thermoelectrics, theoretical calculations have shown that nanowires offer a promising way of enhancing the hitherto low efficiency of these materials in the conversion of temperature differences into electricity. Therefore, within the thermoelectrical community there has been a great experimental effort in the measurement of these quantities in actual nanowires. The measurements of these properties at the nanoscale are also of interest in fields other than energy, such as electrical components for microchips, field effect transistors, sensors, and other low scale devices. For all these applications, knowing the transport properties is mandatory. This review deals with the latest techniques developed to perform the measurement of these transport properties in nanowires. A thorough overview of the most important and modern techniques used for the characterization of different kinds of nanowires will be shown. PMID:24113712

  4. Additional atmospheric opacity measurements at lambda = 1.1 mm from Mauna Kea Observatory, Hawaii

    NASA Technical Reports Server (NTRS)

    Parrish, A.; De Zafra, R. L.; Barrett, J. W.; Solomon, P.; Connor, B.

    1987-01-01

    Atmospheric opacity values in the zenith direction are given for a wavelength of 1.1 mm (278 GHz) at the summit of Mauna Kea in the Hawaiian Islands. A total of 75 days is covered during the period 1983-1986. Observations were made on a quasi-continuous basis, with opacity measured every 20 minutes around the clock for significant periods of time. A conversion from opacity at lambda = 1.1 mm to the equivalent precipitable water vapor column is given from the measurements of Zammit and Ade (1981), from which opacities at other wavelengths may be derived.

  5. An Additional Measure of Overall Effect Size for Logistic Regression Models

    ERIC Educational Resources Information Center

    Allen, Jeff; Le, Huy

    2008-01-01

    Users of logistic regression models often need to describe the overall predictive strength, or effect size, of the model's predictors. Analogs of R[superscript 2] have been developed, but none of these measures are interpretable on the same scale as effects of individual predictors. Furthermore, R[superscript 2] analogs are not invariant to the…

  6. Turbulence measurements over immobile gravel with additions of sand from supply limited to capacity transport conditions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Measurement of the turbulence that drives sand transport over and through immobile gravels is relevant to efforts to model sediment movement downstream of dams, where fine sediments are eroded from coarse substrates and are not replaced due to the presence of the upstream dam. The relative elevatio...

  7. 42 CFR 414.1230 - Additional measures for groups of physicians.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... diabetes. The rate of potentially preventable hospital admissions for diabetes is a composite measure of uncontrolled diabetes, short term diabetes complications, long term diabetes complications and lower extremity amputation for diabetes. (b) A composite of rates of potentially preventable hospital admissions...

  8. 42 CFR 414.1230 - Additional measures for groups of physicians.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... diabetes. The rate of potentially preventable hospital admissions for diabetes is a composite measure of uncontrolled diabetes, short term diabetes complications, long term diabetes complications and lower extremity amputation for diabetes. (b) A composite of rates of potentially preventable hospital admissions...

  9. Assessing the use of an infrared spectrum hyperpixel array imager to measure temperature during additive and subtractive manufacturing

    NASA Astrophysics Data System (ADS)

    Whitenton, Eric; Heigel, Jarred; Lane, Brandon; Moylan, Shawn

    2016-05-01

    Accurate non-contact temperature measurement is important to optimize manufacturing processes. This applies to both additive (3D printing) and subtractive (material removal by machining) manufacturing. Performing accurate single wavelength thermography suffers numerous challenges. A potential alternative is hyperpixel array hyperspectral imaging. Focusing on metals, this paper discusses issues involved such as unknown or changing emissivity, inaccurate greybody assumptions, motion blur, and size of source effects. The algorithm which converts measured thermal spectra to emissivity and temperature uses a customized multistep non-linear equation solver to determine the best-fit emission curve. Emissivity dependence on wavelength may be assumed uniform or have a relationship typical for metals. The custom software displays residuals for intensity, temperature, and emissivity to gauge the correctness of the greybody assumption. Initial results are shown from a laser powder-bed fusion additive process, as well as a machining process. In addition, the effects of motion blur are analyzed, which occurs in both additive and subtractive manufacturing processes. In a laser powder-bed fusion additive process, the scanning laser causes the melt pool to move rapidly, causing a motion blur-like effect. In machining, measuring temperature of the rapidly moving chip is a desirable goal to develop and validate simulations of the cutting process. A moving slit target is imaged to characterize how the measured temperature values are affected by motion of a measured target.

  10. Lattice strain measurements of deuteride (hydride) formation in epitaxial Nb: Additional results and further insights into past measurements

    SciTech Connect

    Allain, Monica M.C.; Heuser, Brent J.

    2005-08-01

    The evolution of lattice strain during in situ gas-phase deuterium loading of epitaxial (110) Nb films on the (1120) sapphire was measured with x-ray diffraction. Two samples with film thicknesses 208 and 1102 A were driven through the miscibility gap. Strains in three orthogonal directions were recorded, permitting the complete set of unit cell parameters to be determined for both the solid solution and deuteride phases. The overall film thickness was simultaneously measured by recording the glancing angle reflectivity response. The behavior of the two films was markedly different, with the thicker film exhibiting a much more compliant behavior and concomitant irreversible plastic deformation. The correlation between out-of-plane lattice and film expansion for both films is also consistent with this observation. These results help explain past inconsistencies observed by others.

  11. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., on or before October 15, 1975, establish a carpool program at Logan Airport, which shall include the... before October 15, 1975, implement a program of systematic dissemination to employers and employees at... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Massachusetts §...

  12. Efficient method for computing the maximum-likelihood quantum state from measurements with additive Gaussian noise.

    PubMed

    Smolin, John A; Gambetta, Jay M; Smith, Graeme

    2012-02-17

    We provide an efficient method for computing the maximum-likelihood mixed quantum state (with density matrix ρ) given a set of measurement outcomes in a complete orthonormal operator basis subject to Gaussian noise. Our method works by first changing basis yielding a candidate density matrix μ which may have nonphysical (negative) eigenvalues, and then finding the nearest physical state under the 2-norm. Our algorithm takes at worst O(d(4)) for the basis change plus O(d(3)) for finding ρ where d is the dimension of the quantum state. In the special case where the measurement basis is strings of Pauli operators, the basis change takes only O(d(3)) as well. The workhorse of the algorithm is a new linear-time method for finding the closest probability distribution (in Euclidean distance) to a set of real numbers summing to one.

  13. Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing

    SciTech Connect

    Gnäupel-Herold, Thomas; Slotwinski, John; Moylan, Shawn

    2014-02-18

    A stainless steel test artifact produced by Direct Metal Laser Sintering and similar to a proposed standardized test artifact was examined using neutron diffraction. The artifact contained a number of structures with different aspect ratios pertaining to wall thickness, height above base plate, and side length. Through spatial resolutions of the order of one millimeter the volumetric distribution of stresses in several was measured. It was found that the stresses peak in the tensile region around 500 MPa near the top surface, with balancing compressive stresses in the interior. The presence of a support structure (a one millimeter high, thin walled, hence weaker, lattice structure deposited on the base plate, followed by a fully dense AM structure) has only minor effects on the stresses.

  14. Time- and isomer-resolved measurements of sequential addition of acetylene to the propargyl radical

    DOE PAGES

    Savee, John D.; Selby, Talitha M.; Welz, Oliver; Taatjes, Craig A.; Osborn, David L.

    2015-10-06

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equationmore » calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. Lastly, this work demonstrates a pathway for PAH formation that does not proceed through benzene.« less

  15. Addition of a channel for XCO observations to a portable FTIR spectrometer for greenhouse gas measurements

    NASA Astrophysics Data System (ADS)

    Hase, Frank; Frey, Matthias; Kiel, Matthäus; Blumenstock, Thomas; Harig, Roland; Keens, Axel; Orphal, Johannes

    2016-05-01

    The portable FTIR (Fourier transform infrared) spectrometer EM27/SUN, dedicated to the precise and accurate observation of column-averaged abundances of methane and carbon dioxide, has been equipped with a second detector channel, which allows the detection of additional species, especially carbon monoxide. This allows an improved characterisation of observed carbon dioxide enhancements and makes the extended spectrometer especially suitable as a validation tool of ESA's Sentinel 5 Precursor mission, as it now covers the same spectral region as used by the infrared channel of the TROPOMI (TROPOspheric Monitoring Instrument) sensor. The extension presented here does not rely on a dichroic, but instead a fraction of the solar beam is decoupled near the aperture stop of the spectrometer using a small plane mirror. This approach allows maintaining the camera-controlled solar tracker set-up, which is referenced to the field stop in front of the primary detector. Moreover, the upgrade of existing instruments can be performed without alterating the optical set-up of the primary channel and resulting changes of the instrumental characteristics of the original instrument.

  16. Time- and Isomer-Resolved Measurements of Sequential Addition of Acetylene to the Propargyl Radical.

    PubMed

    Savee, John D; Selby, Talitha M; Welz, Oliver; Taatjes, Craig A; Osborn, David L

    2015-10-15

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. This work demonstrates a pathway for PAH formation that does not proceed through benzene. PMID:26722791

  17. Time- and isomer-resolved measurements of sequential addition of acetylene to the propargyl radical

    SciTech Connect

    Savee, John D.; Selby, Talitha M.; Welz, Oliver; Taatjes, Craig A.; Osborn, David L.

    2015-10-06

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. Lastly, this work demonstrates a pathway for PAH formation that does not proceed through benzene.

  18. Measuring Productive Elements of Multi-Word Phrase Vocabulary Knowledge among Children with English as an Additional or Only Language

    ERIC Educational Resources Information Center

    Smith, Sara A.; Murphy, Victoria A.

    2015-01-01

    Vocabulary plays a critical role in language and reading development for children, particularly those learning English as an additional language (EAL) (Stahl & Nagy, 2006). Previous research on vocabulary has mainly focused on measuring individual words without considering multi-word phrase knowledge, despite evidence that these items occur…

  19. [What additional measures should be recommended in atopic dermatitis in children?].

    PubMed

    Boralevi, F

    2005-01-01

    The so-called 'adjuvant' measures are an important part of atopic dermatitis (AD) consultations. The practitioner is the 'expert' in the patients' eyes in prescribing, proposing, counselling and replying to the questions concerning moisturizers, thermal spring water cures, the resort to alternative medical, and vaccinations. Moisturizers are aimed at rapidly restoring water in the epidermis, decreasing the sensitivity to irritants and improving the patients' comfort. The available products are usually composed of water, occlusive agents, humidifiers, varyingly combined with tensioactive agents, preservatives and perfumes... Their short term efficacy has been demonstrated, but no study has shown superiority of one product over another. The recommended treatment is 1 to 2 daily applications of a cream or lotion, selected among the products having demonstrated their efficacy, contained the least amount of irritant or sensitizers, the presentation and cost of which is acceptable to the patient. There are no arguments to recommend moisturizers in the absence of xerosis, nor for prolonged periods of clinical remission. Spring water thermal cures. In France there are many cure centres and the spring waters used are distinguished by their clinical or physical features. Although there are no studies that clearly establish their efficacy in AD, the craze and satisfaction of many patients for spring water thermal cures must be taken into consideration, as well as the educational dimension, in the hopes that a consensus will be reached and that regular assessments be made. Alternative medical practices, such as homeopathy or acupuncture, represent a therapeutic alternative chosen by more than one third of patients with AD. However, no study has sufficiently demonstrated the interest of these alternatives and they cannot therefore be integrated in the validated arsenal of treatments. Used in various oriental countries, Chinese herbs have been the subject of controlled studies

  20. Additional Value of CH₄ Measurement in a Combined (13)C/H₂ Lactose Malabsorption Breath Test: A Retrospective Analysis.

    PubMed

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-09-07

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H₂) excretion after an oral dose of lactose. We use a combined (13)C/H₂ lactose breath test that measures breath (13)CO₂ as a measure of lactose digestion in addition to H₂ and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 (13)C/H₂ lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH₄ in addition to H₂ and (13)CO₂. Based on the (13)C/H₂ breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH₄ further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H₂-excretion were found to excrete CH₄. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH₄-concentrations has an added value to the (13)C/H₂ breath test to identify methanogenic subjects with lactose malabsorption or SIBO.

  1. Additional Value of CH₄ Measurement in a Combined (13)C/H₂ Lactose Malabsorption Breath Test: A Retrospective Analysis.

    PubMed

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-09-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H₂) excretion after an oral dose of lactose. We use a combined (13)C/H₂ lactose breath test that measures breath (13)CO₂ as a measure of lactose digestion in addition to H₂ and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 (13)C/H₂ lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH₄ in addition to H₂ and (13)CO₂. Based on the (13)C/H₂ breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH₄ further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H₂-excretion were found to excrete CH₄. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH₄-concentrations has an added value to the (13)C/H₂ breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  2. Routing Corners of Building Structures - by the Method of Vector Addition - Measured with RTN GNSS Surveying Technology

    NASA Astrophysics Data System (ADS)

    Krzyżek, Robert

    2015-12-01

    The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

  3. 34 CFR 403.202 - What must each State's system of core standards and measures of performance include?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Reference: See 34 CFR 400.6. (Approved by the Office of Management and Budget under Control No. 1830-0030... work skill attainment or enhancement including student progress in achieving occupational skills necessary to obtain employment in the field for which the student has been prepared, including...

  4. 49 CFR 23.25 - What measures must recipients include in their ACDBE programs to ensure nondiscriminatory...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... how the recipient's ACDBE program will affect the procurement process; (6) Providing information... direct ownership arrangement with a ACDBE, calculate the goal as a percentage of the total estimated...) Negotiation with a potential concessionaire to include ACDBE participation, through direct...

  5. Longitudinal emittance: An introduction to the concept and survey of measurement techniques including design of a wall current monitor

    SciTech Connect

    Webber, R.C.

    1990-03-01

    The properties of charged particle beams associated with the distribution of the particles in energy and in time can be grouped together under the category of longitudinal emittance. This article is intended to provide an intuitive introduction to the concepts longitudinal emittance; to provide an incomplete survey of methods used to measure this emittance and the related properties of bunch length and momentum spread; and to describe the detailed design of a 6 Ghz bandwidth resistive wall current monitor useful for measuring bunch shapes of moderate to high intensity beams. Overall, the article is intended to be broad in scope, in most cases deferring details to cited original papers. 37 refs., 21 figs.

  6. Status Report of the Frankfurt H--Test LEBT Including a Non-destructive Emittance Measurement Device

    NASA Astrophysics Data System (ADS)

    Gabor, C.; Jakob, A.; Meusel, O.; Schäfer, J.; Klomp, A.; Santić, F.; Pozimski, J.; Klein, H.; Ratzinger, U.

    2002-11-01

    For high power proton accelerators like SNS, ESS or the planned neutrino factory (CERN), negative ions are preferred because they offer charge exchange injection into the accumulation rings (non Liouvillian stacking). The low energy beam emittance is a key parameter in order to avoid emittance growth and particle losses in the high-energy sections. Conventional destructive emittance measurement methods like slit-harp systems are restricted for high power ion beams by the interaction of the ion beam with e.g. slit or harp. Therefore a non-destructive emittance measurement has several technical and physical advantages. To study the transport of high perveance beams of negative ions, a Low Energy Beam Transport (LEBT) section is under construction. The study of non destructive emittance measurement devices is one major subject of the test bench. For negative ions -especially H--ions-photodetachment can be applied for a non-destructive emittance measurement instrument (PD-EMI). The paper will present the status of that emittance diagnostic and of the test bench.

  7. 34 CFR 403.202 - What must each State's system of core standards and measures of performance include?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Are the Administrative Responsibilities of a State Under the State Vocational and Applied Technology Education Program? § 403.202 What must each State's... work skill attainment or enhancement including student progress in achieving occupational...

  8. Measuring mechanical properties, including isotonic fatigue, of fast and slow MLC/mIgf-1 transgenic skeletal muscle.

    PubMed

    Del Prete, Zaccaria; Musarò, Antonio; Rizzuto, Emanuele

    2008-07-01

    Contractile properties of fast-twitch (EDL) and slow-twitch (soleus) skeletal muscles were measured in MLC/mIgf-1 transgenic and wild-type mice. MLC/mIgf-1 mice express the local factor mIgf-1 under the transcriptional control of MLC promoter, selectively activated in fast-twitch muscle fibers. Isolated muscles were studied in vitro in both isometric and isotonic conditions. We used a rapid "ad hoc" testing protocol that measured, in a single procedure, contraction time, tetanic force, Hill's (F-v) curve, power curve and isotonic muscle fatigue. Transgenic soleus muscles did not differ from wild-type with regard to any measured variable. In contrast, transgenic EDL muscles displayed a hypertrophic phenotype, with a mass increase of 29.2% compared to wild-type. Absolute tetanic force increased by 21.5% and absolute maximum power by 34.1%. However, when normalized to muscle cross-sectional area and mass, specific force and normalized power were the same in transgenic and wild-type EDL muscles, revealing that mIgf-1 expression induces a functional hypertrophy without altering fibrotic tissue accumulation. Isotonic fatigue behavior did not differ between transgenic and wild-type muscles, suggesting that the ability of mIgf-1 transgenic muscle to generate a considerable higher absolute power did not affect its resistance to fatigue. PMID:18415017

  9. 13 CFR 123.401 - What types of mitigation measures can your business include in an application for a pre-disaster...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false What types of mitigation measures can your business include in an application for a pre-disaster mitigation loan? 123.401 Section 123... Mitigation Loans § 123.401 What types of mitigation measures can your business include in an application...

  10. 13 CFR 123.401 - What types of mitigation measures can your business include in an application for a pre-disaster...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What types of mitigation measures can your business include in an application for a pre-disaster mitigation loan? 123.401 Section 123... Mitigation Loans § 123.401 What types of mitigation measures can your business include in an application...

  11. 13 CFR 123.401 - What types of mitigation measures can your business include in an application for a pre-disaster...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false What types of mitigation measures can your business include in an application for a pre-disaster mitigation loan? 123.401 Section 123... Mitigation Loans § 123.401 What types of mitigation measures can your business include in an application...

  12. 13 CFR 123.401 - What types of mitigation measures can your business include in an application for a pre-disaster...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 13 Business Credit and Assistance 1 2014-01-01 2014-01-01 false What types of mitigation measures can your business include in an application for a pre-disaster mitigation loan? 123.401 Section 123... Mitigation Loans § 123.401 What types of mitigation measures can your business include in an application...

  13. End of FY2014 Report - Filter Measurement System for Nuclear Material Storage Canisters (Including Altitude Correction for Filter Pressure Drop)

    SciTech Connect

    Moore, Murray E.; Reeves, Kirk Patrick

    2015-02-24

    Two LANL FTS (Filter Test System ) devices for nuclear material storage canisters are fully operational. One is located in PF-4 ( i.e. the TA-55 FTS) while the other is located at the Radiation Protection Division’s Aerosol Engineering Facility ( i.e. the TA-3 FTS). The systems are functionally equivalent , with the TA-3 FTS being the test-bed for new additions and for resolving any issues found in the TA-55 FTS. There is currently one unresolved issue regarding the TA-55 FTS device. The canister lid clamp does not give a leak tight seal when testing the 1 QT (quart) or 2 QT SAVY lids. An adapter plate is being developed that will ensure a correct test configuration when the 1 or 2 QT SAVY lid s are being tested .

  14. Quantification of β region IgA paraproteins - should we include immunochemical "heavy/light chain" measurements? Counterpoint.

    PubMed

    Paolini, Lucia

    2016-06-01

    Serum protein electrophoresis (SPE), serum immunofixation (s-IFE), free light chain measurement (FLC) and nephelometric measurements of total immunoglobulin in serum (IgTot) are some of the laboratory tests required for the management of plasma cell proliferative disorders. The monoclonal protein is usually visible on SPE as a spike (M-spike) in the γ region and the derived densitogram is used to quantify it relative to serum total protein concentration. IgA M-protein, however, often migrates in the β region on SPE and its quantification can be masked by other serum proteins that migrate in this region. The immunoassay Hevylite™ (heavy/light chain, HLC) seems to solve this problem: it quantifies the involved/uninvolved isotype, calculating the ratio IgAκ/IgAλ, considered indicative of clonal proliferation. However, this test seems redundant in the case of artifacts on SPE such as obvious hemolysis or lipemia, or if the IgA M-spike is clearly visible in the β region. In conclusion whereas the IgA HLC assay does not represent an alternative to SPE and s-IFE in the diagnostic patient workup, it may prove to be an alternative to SPE, s-IFE and total IgA quantification in risk stratification and evaluation of response to therapy in patients affected by MM and other monoclonal plasma proliferative disorders.

  15. Validation of Measured Damping Trends for Flight-Like Vehicle Panel/Equipment including a Range of Cable Harness Assemblies

    NASA Technical Reports Server (NTRS)

    Smith, Andrew M.; Davis, R. Benjamin; LaVerde, Bruce T.; Fulcher, Clay W.; Jones, Douglas C.; Waldon, James M.; Craigmyle, Benjamin B.

    2012-01-01

    This validation study examines the effect on vibroacoustic response resulting from the installation of cable bundles on a curved orthogrid panel. Of interest is the level of damping provided by the installation of the cable bundles and whether this damping could be potentially leveraged in launch vehicle design. The results of this test are compared with baseline acoustic response tests without cables. Damping estimates from the measured response data are made using a new software tool that leverages a finite element model of the panel in conjunction with advanced optimization techniques. While the full test series is not yet complete, the first configuration of cable bundles that was assessed effectively increased the viscous critical damping fraction of the system by as much as 0.02 in certain frequency ranges.

  16. Method of measuring sea surface water temperature with a satellite including wideband passive synthetic-aperture multichannel receiver

    NASA Technical Reports Server (NTRS)

    Stacey, J. M. (Inventor)

    1985-01-01

    A wideband passive synthetic-aperture multichannel receiver with an antenna is mounted on a satellite which travels in an orbit above the Earth passing over large bodies of water, e.g., the Atlantic Ocean. The antenna is scanned to receive signals over a wide frequency band from each incremental surface area (pixel) of the water which are related to the pixel's sea temperature. The received signals are fed to several channels which are tuned to separate selected frequencies. Their outputs are fed to a processor with a memory for storage. As the antenna points to pixels within a calibration area around a buoy of known coordinates, signals are likewise received and stored. Exactly measured sea temperature is received from the buoy. After passing over several calibration areas, a forward stepwise regression analysis is performed to produce an expression which selects the significant from the insignificant channels and assigns weights (coefficients) to them. The expression is used to determine the sea temperature at each pixel based on the signals received therefrom. Wind temperature, pressure, and wind speed at each pixel can also be calculated.

  17. Influence of oxygen addition to the carrier gas on laser-induced breakdown spectroscopy measurements on aerosols

    NASA Astrophysics Data System (ADS)

    Palazzo, N.; Migliorini, F.; Dondè, R.; Maffi, S.; De Iuliis, S.

    2016-01-01

    In this work, laser-induced breakdown spectrosopy is implemented on aerosol particles for absolute concentration analysis. The aim of this work is the investigation of the effect of the bath gas used for nebulizing the aerosol. Nitrogen, air, and 50% O2 in N2 mixture have been chosen as carrier gasses in order to analyze the effect of oxygen addition to the gas. LIBS measurements have been carried out on aerosol particles produced from CuCl2 2H2O solutions, and the 324.7 nm Cu line is considered. As a first analysis, plasma parameters, such as temperature and electron density, have been evaluated changing the carrier gas. Measurements to derive the LIBS calibration curve of the 324.7 nm Cu line are carried out in air and in N2. The significant difference in the slope of the resulting calibration curves has to be attributed to the oxygen addition to the bath gas. To explore such behavior, time-resolved measurements of the Cu line and peak/base ratio have been performed. The presence of two competitive effects have been observed that becomes significant increasing the amount of oxygen in the carrier gas. One is the oxygen-quenching effect, already observed in the literature, and the other one is the enhancement of the Cu LIBS signal, expecially at short delay times. These effects have been observed also at other Cu lines and changing the analyte source. The results are presented and widely discussed.

  18. Effect of polyglycerol esters additive on palm oil crystallization using focused beam reflectance measurement and differential scanning calorimetry.

    PubMed

    Saw, M H; Hishamuddin, E; Chong, C L; Yeoh, C B; Lim, W H

    2017-01-01

    The effect of 0.1-0.7% (w/w) of polyglycerol esters (PGEmix-8) on palm oil crystallization was studied using focused beam reflectance measurement (FBRM) to analyze the in-line changes of crystal size distribution during the crystallization. FBRM results show that 0.1-0.5% (w/w) of PGEmix-8 did not significantly affect nucleation but slightly retarded crystal growth. The use of 0.7% (w/w) additive showed greater heterogeneous nucleation compared to those with lower dosages of additive. Crystal growth was also greatly reduced when using 0.7% (w/w) dosage. The morphological study indicated that the palm oil crystals were smaller and more even in size than when more additive was added. Isothermal crystallization studies using differential scanning calorimetry (DSC) showed increased inhibitory effects on palm oil crystal growth with increasing concentration of PGEmix-8. These results imply that PGEmix-8 is a nucleation enhancing and crystal growth retarding additive in palm oil crystallization at 0.7% (w/w) dosage.

  19. Effect of polyglycerol esters additive on palm oil crystallization using focused beam reflectance measurement and differential scanning calorimetry.

    PubMed

    Saw, M H; Hishamuddin, E; Chong, C L; Yeoh, C B; Lim, W H

    2017-01-01

    The effect of 0.1-0.7% (w/w) of polyglycerol esters (PGEmix-8) on palm oil crystallization was studied using focused beam reflectance measurement (FBRM) to analyze the in-line changes of crystal size distribution during the crystallization. FBRM results show that 0.1-0.5% (w/w) of PGEmix-8 did not significantly affect nucleation but slightly retarded crystal growth. The use of 0.7% (w/w) additive showed greater heterogeneous nucleation compared to those with lower dosages of additive. Crystal growth was also greatly reduced when using 0.7% (w/w) dosage. The morphological study indicated that the palm oil crystals were smaller and more even in size than when more additive was added. Isothermal crystallization studies using differential scanning calorimetry (DSC) showed increased inhibitory effects on palm oil crystal growth with increasing concentration of PGEmix-8. These results imply that PGEmix-8 is a nucleation enhancing and crystal growth retarding additive in palm oil crystallization at 0.7% (w/w) dosage. PMID:27507476

  20. Quantitative PCR measurements of Escherichia coli including shiga toxin-producing E. coli (STEC) in animal feces and environmental waters.

    PubMed

    Ahmed, W; Gyawali, P; Toze, S

    2015-03-01

    Quantitative PCR (qPCR) assays were used to determine the concentrations of E. coli including shiga toxin-producing E. coli (STEC) associated virulence genes (eaeA, stx1, stx2, and hlyA) in ten animal species (fecal sources) and environmental water samples in Southeast Queensland, Australia. The mean Log10 concentrations and standard deviations of E. coli 23S rRNA across fecal sources ranged from 1.3 ± 0.1 (horse) to 6.3 ± 0.4 (cattle wastewater) gene copies at a test concentration of 10 ng of DNA. The differences in mean concentrations of E. coli 23S rRNA gene copies among fecal source samples were significantly different from each other (P < 0.0001). Among the virulence genes, stx2 (25%, 95% CI, 17-33%) was most prevalent among fecal sources, followed by eaeA (19%, 95% CI, 12-27%), stx1 (11%, 95% CI, 5%-17%) and hlyA (8%, 95% CI, 3-13%). The Log10 concentrations of STEC virulence genes in cattle wastewater samples ranged from 3.8 to 5.0 gene copies at a test concentration of 10 ng of DNA. Of the 18 environmental water samples tested, three (17%) were positive for eaeA and two (11%) samples were also positive for the stx2 virulence genes. The data presented in this study will aid in the estimation of quantitative microbial risk assessment (QMRA) from fecal pollution of domestic and wild animals in drinking/recreational water catchments.

  1. The 1998-2000 SHADOZ (Southern Hemisphere ADditional Ozonesondes) Tropical Ozone Climatology: Comparison with TOMS and Ground-Based Measurements

    NASA Technical Reports Server (NTRS)

    Thompson, Anne M.; Witte, Jacquelyn; McPeters, Richard D.; Oltmans, Samuel J.; Schmidlin, Francis J.; Logan, Jennifer A.; Fujiwara, Masatormo; Kirchhoff, Volker W. J. H.; Posny, Francoise; Coetzee, Gerhard J. R.; Bhartia, P. K. (Technical Monitor)

    2001-01-01

    A network of 10 southern hemisphere tropical and Subtropical stations, designated the Southern Hemisphere ADditional OZonesondes, (SHADOZ) project and established from operational sites, provided over 1000 ozone profiles during the period 1998-2000. Balloon-borne electrochemical concentration cell (ECC) ozonesondes, combined with standard radiosondes for pressure, temperature and relative humidity measurements, collected profiles in the troposphere and lower- to mid-stratosphere at: Ascension Island; Nairobi, Kenya; Irene, South Africa: Reunion Island, Watukosek Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil.

  2. Photon Doppler Velocimeter to Measure Entrained Additive Manufactured Bulk Metal Powders in Hot Subsonic and Supersonic Oxygen Gas

    NASA Technical Reports Server (NTRS)

    Tylka, Jonathan

    2016-01-01

    Parts produced by additive manufacturing, particularly selective laser melting (SLM), have been shown to silt metal particulate even after undergoing stringent precision aerospace cleaning processes (Lowrey 2016). As printed parts are used in oxygen systems with increased pressures, temperatures, and gas velocity, the risk of ignition by particle impact, the most common direct ignition source of metals in oxygen, substantially increases. The White Sands Test Facility (WSTF), in collaboration with Marshall Space Flight Center (MSFC), desires to test the ignitability of SLM metals by particle impact in heated oxygen. The existing test systems rely on gas velocity calculations to infer particle velocity in both subsonic and supersonic particle impact systems. Until now, it was not possible to directly measure particle velocity. To increase the fidelity of planned SLM ignition studies, it is necessary to validate that the Photon Doppler Velocimetry(PDV) test system can accurately measure particle velocity.

  3. Uncertainty in measurement: a review of monte carlo simulation using microsoft excel for the calculation of uncertainties through functional relationships, including uncertainties in empirically derived constants.

    PubMed

    Farrance, Ian; Frenkel, Robert

    2014-02-01

    The Guide to the Expression of Uncertainty in Measurement (usually referred to as the GUM) provides the basic framework for evaluating uncertainty in measurement. The GUM however does not always provide clearly identifiable procedures suitable for medical laboratory applications, particularly when internal quality control (IQC) is used to derive most of the uncertainty estimates. The GUM modelling approach requires advanced mathematical skills for many of its procedures, but Monte Carlo simulation (MCS) can be used as an alternative for many medical laboratory applications. In particular, calculations for determining how uncertainties in the input quantities to a functional relationship propagate through to the output can be accomplished using a readily available spreadsheet such as Microsoft Excel. The MCS procedure uses algorithmically generated pseudo-random numbers which are then forced to follow a prescribed probability distribution. When IQC data provide the uncertainty estimates the normal (Gaussian) distribution is generally considered appropriate, but MCS is by no means restricted to this particular case. With input variations simulated by random numbers, the functional relationship then provides the corresponding variations in the output in a manner which also provides its probability distribution. The MCS procedure thus provides output uncertainty estimates without the need for the differential equations associated with GUM modelling. The aim of this article is to demonstrate the ease with which Microsoft Excel (or a similar spreadsheet) can be used to provide an uncertainty estimate for measurands derived through a functional relationship. In addition, we also consider the relatively common situation where an empirically derived formula includes one or more 'constants', each of which has an empirically derived numerical value. Such empirically derived 'constants' must also have associated uncertainties which propagate through the functional relationship

  4. 13 CFR 123.402 - Can your business include its relocation as a mitigation measure in an application for a pre...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... relocation as a mitigation measure in an application for a pre-disaster mitigation loan? 123.402 Section 123... Mitigation Loans § 123.402 Can your business include its relocation as a mitigation measure in an application for a pre-disaster mitigation loan? Yes, you may request a pre-disaster mitigation loan for...

  5. 13 CFR 123.402 - Can your business include its relocation as a mitigation measure in an application for a pre...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... relocation as a mitigation measure in an application for a pre-disaster mitigation loan? 123.402 Section 123... Mitigation Loans § 123.402 Can your business include its relocation as a mitigation measure in an application for a pre-disaster mitigation loan? Yes, you may request a pre-disaster mitigation loan for...

  6. 13 CFR 123.402 - Can your business include its relocation as a mitigation measure in an application for a pre...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... relocation as a mitigation measure in an application for a pre-disaster mitigation loan? 123.402 Section 123... Mitigation Loans § 123.402 Can your business include its relocation as a mitigation measure in an application for a pre-disaster mitigation loan? Yes, you may request a pre-disaster mitigation loan for...

  7. 13 CFR 123.402 - Can your business include its relocation as a mitigation measure in an application for a pre...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... relocation as a mitigation measure in an application for a pre-disaster mitigation loan? 123.402 Section 123... Mitigation Loans § 123.402 Can your business include its relocation as a mitigation measure in an application for a pre-disaster mitigation loan? Yes, you may request a pre-disaster mitigation loan for...

  8. Addition of posttraumatic stress and sensory hypersensitivity more accurately estimates disability and pain than fear avoidance measures alone after whiplash injury.

    PubMed

    Pedler, Ashley; Kamper, Steven J; Sterling, Michele

    2016-08-01

    The fear avoidance model (FAM) has been proposed to explain the development of chronic disability in a variety of conditions including whiplash-associated disorders (WADs). The FAM does not account for symptoms of posttraumatic stress and sensory hypersensitivity, which are associated with poor recovery from whiplash injury. The aim of this study was to explore a model for the maintenance of pain and related disability in people with WAD including symptoms of PTSD, sensory hypersensitivity, and FAM components. The relationship between individual components in the model and disability and how these relationships changed over the first 12 weeks after injury were investigated. We performed a longitudinal study of 103 (74 female) patients with WAD. Measures of pain intensity, cold and mechanical pain thresholds, symptoms of posttraumatic stress, pain catastrophising, kinesiophobia, and fear of cervical spine movement were collected within 6 weeks of injury and at 12 weeks after injury. Mixed-model analysis using Neck Disability Index (NDI) scores and average 24-hour pain intensity as the dependent variables revealed that overall model fit was greatest when measures of fear of movement, posttraumatic stress, and sensory hypersensitivity were included. The interactive effects of time with catastrophising and time with fear of activity of the cervical spine were also included in the best model for disability. These results provide preliminary support for the addition of neurobiological and stress system components to the FAM to explain poor outcome in patients with WAD. PMID:27007066

  9. High-resolution ionospheric observations and modeling over Belgium during the solar eclipse of 20 March 2015 including first results of ionospheric tilt and plasma drift measurements

    NASA Astrophysics Data System (ADS)

    Verhulst, Tobias G. W.; Sapundjiev, Danislav; Stankov, Stanimir M.

    2016-06-01

    The ionospheric behavior over Belgium during the partial solar eclipse of 20 March 2015 is analyzed based on high-resolution solar radio flux, vertical incidence sounding, and GPS TEC measurements. First results of ionosonde-based ionospheric plasma drift and tilt observations are presented and analyzed, including some traveling ionospheric disturbances caused by the eclipse. Also, collocated ionosonde and GPS measurements are used to reconstruct the time evolution of the vertical electron density distribution using the Royal Meteorological Institute (RMI) ionospheric specification system, called Local Ionospheric Electron Density profile Reconstruction (LIEDR).

  10. DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2 lasers

    NASA Technical Reports Server (NTRS)

    Brockman, P.; Hess, R. V.; Staton, L. D.; Bair, C. H.

    1980-01-01

    Atmospheric trace constituent measurements with higher vertical resolution than attainable with passive radiometers are discussed. Infrared differential absorption lidar (DIAL), which depends on Mie scattering from aerosols, has special advantages for tropospheric and lower stratospheric applications and has great potential importance for measurements from shuttle and aircraft. Differential absorption lidar data reduction involves comparing large amplitude signals which have small differences. The accuracy of the trace constituent concentration inferred from DIAL measurements depends strongly on the errors in determining the amplitude of the signals. Thus, the commonly used SNR expression (signal divided by noise in the absence of signal) is not adequate to describe DIAL measurement accuracy and must be replaced by an expression which includes the random coherent (speckle) noise within the signal. A comprehensive DIAL computer algorithm is modified to include heterodyne detection and speckle noise. Examples for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system are given.

  11. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  12. Measurement of factor VIII activity using one-stage clotting assay: a calibration curve has not to be systematically included in each run.

    PubMed

    Lattes, S; Appert-Flory, A; Fischer, F; Jambou, D; Toulon, P

    2011-01-01

    Coagulation factor VIII (FVIII) is usually evaluated using activated partial thromboplastin time-based one-stage clotting assays. Guidelines for clotting factor assays indicate that a calibration curve should be included each time the assay is performed. Therefore, FVIII measurement is expensive, reagent- and time-consuming. The aim of this study was to compare FVIII activities obtained using the same fully automated assay that was calibrated once (stored calibration curve) or each time the assay was performed. Unique lots of reagents were used throughout the study. We analysed 255 frozen plasma samples from patients who were prescribed FVIII measurement including treated and untreated haemophilia A patients. Twenty-six runs were performed on a 28-week period, each including four lyophilized control and at most 10 patient plasma samples. In control samples, FVIII activities were not significantly different when the assay was performed using the stored calibration curve or was daily calibrated. The same applied to FVIII activities in patient plasma samples that were not significantly different throughout the measuring range of activities [68.3% (<1-179) vs. 67.6% (<1-177), P=0.48] and no relevant bias could be demonstrated when data were compared according to Bland and Altman. These results suggest that in the studied technical conditions, performing the FVIII assay using a stored calibration curve is reliable, for at least 6 months. Therefore, as far as the same lots of reagents are used, it is not mandatory to include a calibration curve each time the FVIII assay was performed. However, this strategy has to be validated if the assay is performed in different technical conditions.

  13. Standard addition flow method for potentiometric measurements at low concentration levels: application to the determination of fluoride in food samples.

    PubMed

    Galvis-Sánchez, Andrea C; Santos, João Rodrigo; Rangel, António O S S

    2015-02-01

    A standard addition method was implemented by using a flow manifold able to perform automatically multiple standard additions and in-line sample treatment. This analytical strategy was based on the in-line mixing of sample and standard addition solutions, using a merging zone approach. The flow system aimed to exploit the standard addition method to quantify the target analyte particularly in cases where the analyte concentration in the matrix is below the lower limit of linear response of the detector. The feasibility of the proposed flow configuration was assessed through the potentiometric determination of fluoride in sea salts of different origins and different types of coffee infusions. The limit of quantification of the proposed manifold was 5×10(-6) mol L(-1), 10-fold lower than the lower limit of linear response of the potentiometric detector used. A determination rate of 8 samples h(-1) was achieved considering an experimental procedure based on three standard additions per sample. The main advantage of the proposed strategy is the simple approach to perform multiple standard additions, which can be implemented with other ion selective electrodes, especially in cases when the primary ion is below the lower limit of linear response of the detector.

  14. Direct measurement of additional Ar-H2O vibration-rotation-tunneling bands in the millimeter-submillimeter range

    NASA Astrophysics Data System (ADS)

    Zou, Luyao; Widicus Weaver, Susanna L.

    2016-06-01

    Three new weak bands of the Ar-H2O vibration-rotation-tunneling spectrum have been measured in the millimeter wavelength range. These bands were predicted from combination differences based on previously measured bands in the submillimeter region. Two previously reported submillimeter bands were also remeasured with higher frequency resolution. These new measurements allow us to obtain accurate information on the Coriolis interaction between the 101 and 110 states. Here we report these results and the associated improved molecular constants.

  15. Measurements of Volatile Organic Compounds (Including Dimethyl Sulfide), Aerosol Particles, and CCN in the Canadian Arctic: Preliminary Results from the Summer 2014 NETCARE Expedition Aboard the CCGS Amundsen

    NASA Astrophysics Data System (ADS)

    Mungall, E. L.; Abbatt, J.; Lee, A.; Ladino Moreno, L.

    2014-12-01

    The Arctic in summer is a cloud condensation nucleus (CCN) limited environment, and the controls on aerosol number and composition, and thus cloud formation, are poorly understood. A better understanding of these controls and their consequences is required in order to understand the region's changing climate. In order to advance that understanding, during Summer 2014 we deployed instrumentation aboard the CCGS Amundsen, the Canadian research icebreaker. We participated in Legs 1a and 1b of the cruise, affording us observations in locations as varied as the Gulf of St. Lawrence, Lancaster Sound, and the Nares Strait. We collected on-line measurements with high time resolution of particle number, size and CCN activity as well as mixing ratios of volatile organic compounds (VOCs) including dimethyl sulfide, which has been implicated as an important contributor to the CCN population in the Arctic. We also attempted to directly measure air-sea fluxes of dimethyl sulfide using a high resolution time of flight mass spectrometer (HR-ToF-CIMS, Aerodyne) sampling at 10 Hz. Here, we report preliminary results from those measurements.

  16. Are Dietary Restraint Scales Valid Measures of Dietary Restriction? Additional Objective Behavioral and Biological Data Suggest Not

    PubMed Central

    Stice, Eric; Sysko, Robyn; Roberto, Christina A.; Allison, Shelley

    2009-01-01

    Prospective studies find that individuals with elevated dietary restraint scores are at increased risk for bulimic symptom onset, yet experiments find that assignment to energy-deficit diet interventions reduce bulimic symptoms. One explanation for the conflicting findings is that the dietary restraint scales used in the former studies do not actually identify individuals who are restraining their caloric intake. Thus, we tested whether dietary restraint scales showed inverse relations to objectively measured caloric intake in three studies. Four dietary restraint scales did not correlate with doubly labeled water estimates of caloric intake over a 2-week period (M r = .01). One scale showed a significant inverse correlation with objectively measured caloric intake during a regular meal ordered from an ecologically valid menu (M r = −.30), but a significant positive relation that was qualified by a significant quadratic effect, to objectively measured caloric intake during multiple eating episodes in the lab (M r = .32). In balance, results suggest that dietary restraint scales are not valid measures of dietary restriction, replicating findings from prior studies that examined objective measures of caloric intake. PMID:20006662

  17. A rapid automated procedure for laboratory and shipboard spectrophotometric measurements of seawater alkalinity: continuously monitored single-step acid additions

    NASA Astrophysics Data System (ADS)

    Liu, X.; Byrne, R. H.; Lindemuth, M.; Easley, R. A.; Patsavas, M. C.

    2012-12-01

    An automated system for shipboard and laboratory alkalinity measurements is presented. The simple system, which consists of a Dosimat titrator to deliver acid volumetrically and a USB 4000 spectrophotometer to monitor the titration progress, provides fast, precise and accurate measurements of total alkalinity for oceanographic research. The analytical method is based on single-point HCl titrations of seawater samples of a known volume; bromol cresol purple is used as an indicator to determine the final pH. Field data from an Arctic cruise demonstrates accuracy and precision around 1 micro mol/kg and a sample processing rate of 6 min per sample.

  18. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    SciTech Connect

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  19. Near-road modeling and measurement of cerium-containing particles generated by nanoparticle diesel fuel additive use

    EPA Science Inventory

    Cerium oxide nanoparticles (nCe) are used as a fuel-borne catalyst in diesel engines to reduce particulate emissions, yet the environmental and human health impacts of the exhaust particles are not well understood. To bridge the gap between emission measurements and ambient impac...

  20. {sup 13}C chemical shift anisotropies for carbonate ions in cement minerals and the use of {sup 13}C, {sup 27}Al and {sup 29}Si MAS NMR in studies of Portland cement including limestone additions

    SciTech Connect

    Sevelsted, Tine F.; Herfort, Duncan

    2013-10-15

    {sup 13}C isotropic chemical shifts and chemical shift anisotropy parameters have been determined for a number of inorganic carbonates relevant in cement chemistry from slow-speed {sup 13}C MAS or {sup 13}C({sup 1}H) CP/MAS NMR spectra (9.4 T or 14.1 T) for {sup 13}C in natural abundance. The variation in the {sup 13}C chemical shift parameters is relatively small, raising some doubts that different carbonate species in Portland cement-based materials may not be sufficiently resolved in {sup 13}C MAS NMR spectra. However, it is shown that by combining {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR carbonate anions in anhydrous and hydrated phases can be distinguished, thereby providing valuable information about the reactivity of limestone in cement blends. This is illustrated for three cement pastes prepared from an ordinary Portland cement, including 0, 16, and 25 wt.% limestone, and following the hydration for up to one year. For these blends {sup 29}Si MAS NMR reveals that the limestone filler accelerates the hydration for alite and also results in a smaller fraction of tetrahedrally coordinated Al incorporated in the C-S-H phase. The latter result is more clearly observed in {sup 27}Al MAS NMR spectra of the cement–limestone blends and suggests that dissolved aluminate species in the cement–limestone blends readily react with carbonate ions from the limestone filler, forming calcium monocarboaluminate hydrate. -- Highlights: •{sup 13}C chemical shift anisotropies for inorganic carbonates from {sup 13}C MAS NMR. •Narrow {sup 13}C NMR chemical shift range (163–171 ppm) for inorganic carbonates. •Anhydrous and hydrated carbonate species by {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR. •Limestone accelerates the hydration for alite in Portland – limestone cements. •Limestone reduces the amount of aluminium incorporated in the C-S-H phase.

  1. Additional Value of CH4 Measurement in a Combined 13C/H2 Lactose Malabsorption Breath Test: A Retrospective Analysis

    PubMed Central

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-01-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H2) excretion after an oral dose of lactose. We use a combined 13C/H2 lactose breath test that measures breath 13CO2 as a measure of lactose digestion in addition to H2 and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 13C/H2 lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH4 in addition to H2 and 13CO2. Based on the 13C/H2 breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH4 further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H2-excretion were found to excrete CH4. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH4-concentrations has an added value to the 13C/H2 breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  2. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  3. DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2lasers

    NASA Technical Reports Server (NTRS)

    Brockman, P.; Hess, R. V.; Staton, L. D.; Bair, C. H.

    1980-01-01

    A parametric analysis of DIAL sensitivity with heterodyne detection is presented and comparisons with direct detection are discussed. Examples are given for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system. Results indicate that maximum sensitivity at minimum laser energy per measurement requires multiple pulse operation with the energy per pulse selected so that the measured photon rate is approximately equal to the detector IF bandwidth. Measurement sensitivities can be maximized and interference effects minimized by fine adjustment of measurement frequencies using the tunability of high pressure lasers. The use of rare isotope lasers minimizes loss due to CO2 atmospheric absorption.

  4. Analysis of Air Toxics From NOAA WP-3 Aircraft Measurements During the TexAQS 2006 Campaign: Comparison With Emission Inventories and Additive Inhalation Risk Factors

    NASA Astrophysics Data System (ADS)

    Del Negro, L. A.; Warneke, C.; de Gouw, J. A.; Atlas, E.; Lueb, R.; Zhu, X.; Pope, L.; Schauffler, S.; Hendershot, R.; Washenfelder, R.; Fried, A.; Richter, D.; Walega, J. G.; Weibring, P.

    2007-12-01

    Benzene and nine other air toxics classified as human carcinogens by the International Agency for Research on Cancer (IARC) were measured from the NOAA WP-3 aircraft during the TexAQS 2006 campaign. In-situ measurements of benzene, measured with a PTR-MS instrument, are used to estimate emission fluxes for comparison with point source emission inventories developed by the Texas Commission on Environmental Quality. Mean and median mixing ratios for benzene, acetaldehyde, formaldehyde, 1,3-butadiene, carbon tetrachloride, chloroform, 1,2-dichloroethane, dibromoethane, dichloromethane, and vinyl chloride, encountered over the city of Houston during the campaign, are combined with inhalation unit risk factor values developed by the California Environmental Protection Agency and the United States Environmental Protection Agency to estimate the additive inhalation risk factor. This additive risk factor represents the risk associated with lifetime (70 year) exposure at the levels measured and should not be used as an absolute indicator of risk to individuals. However, the results are useful for assessments of changing relative risk over time, and for identifying dominant contributions to the overall air toxic risk.

  5. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    SciTech Connect

    Beal, D.; McIlvaine, J.; Fonorow, K.; Martin, E.

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

  6. Additional hemodynamic measurements with an esophageal Doppler monitor: a preliminary report of compliance, force, kinetic energy, and afterload in the clinical setting.

    PubMed

    Atlas, Glen; Brealey, David; Dhar, Sunil; Dikta, Gerhard; Singer, Meryvn

    2012-12-01

    The esophageal Doppler monitor (EDM) is a minimally-invasive hemodynamic device which evaluates both cardiac output (CO), and fluid status, by estimating stroke volume (SV) and calculating heart rate (HR). The measurement of these parameters is based upon a continuous and accurate approximation of distal thoracic aortic blood flow. Furthermore, the peak velocity (PV) and mean acceleration (MA), of aortic blood flow at this anatomic location, are also determined by the EDM. The purpose of this preliminary report is to examine additional clinical hemodynamic calculations of: compliance (C), kinetic energy (KE), force (F), and afterload (TSVR(i)). These data were derived using both velocity-based measurements, provided by the EDM, as well as other contemporaneous physiologic parameters. Data were obtained from anesthetized patients undergoing surgery or who were in a critical care unit. A graphical inspection of these measurements is presented and discussed with respect to each patient's clinical situation. When normalized to each of their initial values, F and KE both consistently demonstrated more discriminative power than either PV or MA. The EDM offers additional applications for hemodynamic monitoring. Further research regarding the accuracy, utility, and limitations of these parameters is therefore indicated.

  7. Factors Affecting The Experimental Line Spread Function (Lsf) Measurement And Modulation Transfer Function (Mtf) Calculation Including Deviation In Characteristic Curve Shape

    NASA Astrophysics Data System (ADS)

    Dahle, Marcia E.; Haus, Arthur G.

    1980-08-01

    The major potential errors in the slit method measurement of the line spread function (LSF) and the modu-lation transfer function (MTF) of radiographic screen-film systems are reviewed. These errors are compared with the potential error introduced in the LSF due to an erroneous representation of the characteristic curve (sensitometric data). If a deviation in the sensitometric data results in a lower average gradient of the characteristic curve, the MTF will show higher resolution capabilities.

  8. FUNDAMENTAL AREAS OF PHENOMENOLOGY (INCLUDING APPLICATIONS): Teleportation of a Superposition of Three Orthogonal States of an Atom without Bell-State Measurement

    NASA Astrophysics Data System (ADS)

    Zhong, Zhi-Rong

    2008-05-01

    A scheme to teleport a superposition of three orthogonal states of an atom without Bell-state measurement in cavity QED is proposed. The scheme based on the resonant interaction of two Λ-type three-level atoms with a bimodal cavity. The detection of atom a collapses atom b to the initial state of atom a with cavity mode left in two-mode vacuum state. The probability of success and the fidelity of this scheme are 0.112 and 0.999, respectively.

  9. Determination of potassium in several plants and study of potassium transfer to different beverages, including tequila, by measurement of 40K

    NASA Astrophysics Data System (ADS)

    Navarrete, J. M.; Muller, G.; Cabrera, L.; Martinez, T.

    2006-01-01

    Measurement of 40K was used for determination of potassium concentrations in leaves of agave and maguey cactus leaves, and coffee beans of various origins. The procedure was also used to study potassium transfer to tequila (alcoholic drink made of agave cactus), and the cactus and coffee infusions using 40K as a natural radioactive tracer. Counting of 40K in Marinelli containers with the aid of a low background NaI(Ti) scintillation detection system for 12 24 hours was employed. The method appeared to be simple and suitable for determination of potassium concentrations in large samples, which eliminates homogeneity problems.

  10. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  11. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  12. Association of Holter-Based Measures Including T-wave Alternans with Risk of Sudden Cardiac Death in the Community-Dwelling Elderly: The Cardiovascular Health Study

    PubMed Central

    Stein, Phyllis K.; Sanghavi, Devang; Sotoodehnia, Nona; Siscovick, David S; Gottdiener, John

    2010-01-01

    Background Sudden cardiac death (SCD) can be the first manifestation of cardiovascular disease. Development of screening methods for higher / lower risk is critical. Methods The Cardiovascular Healthy Study (CHS) is a population-based study of risk factors for coronary heart disease and stroke those ≥65 years. N=49 (of 1649) with usable Holters and in normal sinus rhythm, suffered SCD during follow up and were matched with 2 controls, alive at the time of death of the case and not suffering SCD on follow up. Univariate and multivariate conditional logistic regression determined the association of Holter-based information and SCD. Results In univariate models, the upper half of VPC counts, abnormal heart rate turbulence, decreased normalized low frequency power, increased T-wave alternans (TWA) and decreased DFA1 (short-term fractal scaling exponent) were associated with SCD, but time domain HRV was not. In multivariate models, the upper half of VPC counts (OR=6.6) and having TWA ≥37µV on Ch2 (OR=4.8) were independently associated with SCD. Also, the upper half of VPC counts (OR=6.9) and having DFA1 <1.05 (OR=5.0) were independently associated with SCD. When additive effects were explored: having both higher VPCs and higher TWA was associated with an OR of 8.2 for SCD compared to 2.6 for having either. Also, having both higher VPCs and lower DFA1 was associated with an OR of 9.6 for SCD compared to 3.1 for having either. Conclusions Results support a potential role for 24-hour Holter recordings to identify older adults at increased or lower risk of SCD. PMID:20096853

  13. Lower solar chromosphere-corona transition region. III - Implications of the observed quiet-sun emission measure including wave pressure effects

    NASA Technical Reports Server (NTRS)

    Woods, D. Tod; Holzer, Thomas E.; Macgregor, Keith B.

    1990-01-01

    The observed form of the emission measure (EM) is used as a function of temperature to infer the wave energy flux density and pressure throughout the lower transition region (TR). This procedure eliminates the need for specifying how the wave energy flux density is damped and addresses the question of whether there is any form of the mechanical heating associated with the degradation of an upward traveling wave energy flux density which is consistent with the observed EM and other observational constraints for the quiet sun. It is found that the observed form of the EM curve is incompatible with waves traveling vertically at the sound speed, regardless of any filling factor arguments. The same conclusion also applies to waves traveling at the Alfven speed, unless it is assumed that the emission in lower TR lines originates solely from small, spatially unresolved regions of large magnetic field strength (100 G), which cover a small fraction (filling factors of 1 percent) of the solar surface.

  14. Investigation of optimized experimental parameters including laser wavelength for boron measurement in photovoltaic grade silicon using laser-induced breakdown spectroscopy

    NASA Astrophysics Data System (ADS)

    Darwiche, S.; Benmansour, M.; Eliezer, N.; Morvan, D.

    2010-08-01

    The quantification of boron and other impurities in photovoltaic grade silicon was investigated using the LIBS technique with attention to the laser wavelength employed, temporal parameters, and the nature of the ambient gas. The laser wavelength was found to have a moderate effect on the performance of the process, while the type of purge gas and temporal parameters had a strong effect on the signal-to-background ratio (SBR) of the boron spectral emission, which was used to determine the boron concentration in silicon. The three parameters are not independent, meaning that for each different purge gas, different optimal temporal parameters are observed. Electron density was also calculated from Stark broadening of the 390.5 nm silicon emission line in order to better understand the different performances observed when using different gases and gating parameters. Calibration curves were made for boron measurement in silicon using certified standards with different purge gases while using the temporal parameters which had been optimized for that gas. By comparing the calibration curves, it was determined that argon is superior to helium or air for use as the analysis chamber purge gas with an UV laser.

  15. Measured effects of retrofits -- a refrigerant oil additive and a condenser spray device -- on the cooling performance of a heat pump

    SciTech Connect

    Levins, W.P.; Sand, J.R.; Baxter, V.D.; Linkous, R.L.

    1996-05-01

    A 15-year old, 3-ton single package air-to-air heat pump was tested in laboratory environmental chambers simulating indoor and outdoor conditions. After documenting initial performance, the unit was retrofitted with a prototype condenser water-spray device and retested. Results at standard ARI cooling rating conditions (95 F outdoor dry bulb and 80/67 F indoor dry bulb/wet bulb temperatures) showed the capacity increased by about 7%, and the electric power demand dropped by about 8%, resulting in a steady-state EER increase of 17%. Suction and discharge pressures were reduced by 7 and 37 psi, respectively. A refrigerant oil additive formulated to enhance refrigerant-side heat transfer was added at a dose of one ounce per ton of rated capacity, and the unit was tested for several days at the same 95 F outdoor conditions and showed essentially no increase in capacity, and a slight 3% increase in steady-state EER. Adding more additive lowered the EER slightly. Suction and discharge pressures were essentially unchanged. The short-term testing showed that the condenser-spray device was effective in increasing the cooling capacity and lowering the electrical demand on an old and relatively inefficient heat pump, but the refrigerant additive had little effect on the cooling performance of the unit. Sprayer issues to be resolved include the effect of a sprayer on a new, high-efficiency air conditioner/heat pump, reliable long-term operation, and economics.

  16. The recovery of the polymerizability of Lys-61-labelled actin by the addition of phalloidin. Fluorescence polarization and resonance-energy-transfer measurements.

    PubMed

    Miki, M

    1987-04-01

    Modification of Lys-61 in actin with fluorescein-5-isothiocyanate (FITC) blocks actin polymerization [Burtnick, L. D. (1984) Biochim. Biophys. Acta 791, 57-62]. FITC-labelled actin recovered its ability to polymerize on addition of phalloidin. The polymers had the same characteristic helical thread-like structure as normal F-actin and the addition of myosin subfragment-1 to the polymers formed the characteristic arrowhead structure in electron microscopy. The polymers activated the ATPase activity of myosin subfragment-1 as efficiently as normal F-actin. These results indicate that Lys-61 is not directly involved in an actin-actin binding region nor in myosin binding site. From static fluorescence polarization measurements, the rotational relaxation time of FITC-labelled actin filaments was calculated to be 20 ns as the value reduced in water at 20 degrees C, while any rotational relaxation time of 1,5-IAEDANS bound to Cys-374 on F-actin in the presence of a twofold molar excess of phalloidin could not be detected by static polarization measurements under the same conditions. This indicates that the Lys-61 side chain is extremely mobile even in the filamentous structure. Fluorescence resonance energy transfer between the donor 1,5-IAEDANS bound to SH1 of myosin subfragment-1 and the acceptor fluorescein-5-isothiocyanate bound to Lys-61 of actin in the rigor complex was measured. The transfer efficiency was 0.39 +/- 0.05 which corresponds to the distance of 5.2 +/- 0.1 nm, assuming that the energy donor and acceptor rotate rapidly relative to the fluorescence lifetime and that the transfer occurs between a single donor and an acceptor.

  17. Assessing blood brain barrier dynamics or identifying or measuring selected substances, including ethanol or toxins, in a subject by analyzing Raman spectrum signals

    NASA Technical Reports Server (NTRS)

    Lambert, James L. (Inventor); Borchert, Mark S. (Inventor)

    2008-01-01

    A non-invasive method for analyzing the blood-brain barrier includes obtaining a Raman spectrum of a selected portion of the eye and monitoring the Raman spectrum to ascertain a change to the dynamics of the blood brain barrier.Also, non-invasive methods for determining the brain or blood level of an analyte of interest, such as glucose, drugs, alcohol, poisons, and the like, comprises: generating an excitation laser beam at a selected wavelength (e.g., at a wavelength of about 400 to 900 nanometers); focusing the excitation laser beam into the anterior chamber of an eye of the subject so that aqueous humor, vitreous humor, or one or more conjunctiva vessels in the eye is illuminated; detecting (preferably confocally detecting) a Raman spectrum from the illuminated portion of the eye; and then determining the blood level or brain level (intracranial or cerebral spinal fluid level) of an analyte of interest for the subject from the Raman spectrum. In certain embodiments, the detecting step may be followed by the step of subtracting a confounding fluorescence spectrum from the Raman spectrum to produce a difference spectrum; and determining the blood level and/or brain level of the analyte of interest for the subject from that difference spectrum, preferably using linear or nonlinear multivariate analysis such as partial least squares analysis. Apparatus for carrying out the foregoing methods are also disclosed.

  18. A comparison of cardiovascular risk as measured by compound blood lipid indices and two indices including lifestyle factors in occupational health service.

    PubMed

    Berg, J E

    1996-08-01

    Healthy employees in a non-manufacturing firm (n = 252) were divided into low and high cardiovascular risk subjects in order to compare different indices of cardiovascular risk for use in occupational health service. The levels of total cholesterol (TC), a compound index of blood lipid components, the 'atherogenic index' (ATH-index) defined as ([TC-HDLc] x [apoB])/([HDLc] x [apoA]), and two other compound indices, one Norwegian (Westlund) and one Scottish (Dundee score) were compared. Information on smoking habits and blood pressure were part of the two last indices. Cut-off values to separate between low and high risk subjects were defined with TC = 6.5 mmol/l, HDLc = 0.9 mmol/l, apoA = 1.8 g/l and apoB = 1.3 g/l, all values based on clinical guidelines in Norway. No smoking and a systolic blood pressure < 150 mmHg was included as cut-off of the combined indices. According to the three indices (ATH, Westlund and Dundee) 102, 25 and 116 employees were allocated to the increased risk group. Persons allocated to the increased risk group by the combined indices and not by the compound index were practically all smokers. Systolic blood pressure differed between indices only for persons with extreme pressures. A compound blood lipid index of CV risk, which may be drawn easily in an occupational health setting in an unfasting state and sent by post to a laboratory, mimics the allocation of persons to an increased risk group using combined indices. Smokers with normal lipid values would be allocated to increased risk by the combined indices, but not necessarily by the compound index. The use of the compound index together with advice to stop smoking is suggested as a time-saving strategy.

  19. 34 CFR 303.15 - Include; including.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include; including. 303.15 Section 303.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  20. Voyager 1/UVS measurements of the backscattered solar Lyman-alpha emission at the distant heliosphere: unknown source of additional emission

    NASA Astrophysics Data System (ADS)

    Katushkina, Olga; Alexashov, Dmitry; Sandel, Bill R.; Izmodenov, Vladislav; Quemerais, Eric

    2016-07-01

    Voyager 1/UVS has been performing measurements of the backscattered solar Lyman-alpha intensities for more than 35 years at distances 5-130 AU from the Sun. Backscattered Lyman-alpha emission depends on the interstellar hydrogen distribution in the solar wind / LISM interaction region. Therefore, measurement of the Lyman-alpha intensities is a tool for remote sensing of the hydrogen parameters at the heliospheric boundary. It is interesting to study dependence of the Lyman-alpha intensities on distance from the Sun. Namely, the Voyager 1 data show decrease of intensity (after correction for the solar flux variations) from 5 to 90 AU (1979-2003), then almost constant intensity between 90 and 115 AU (2003-2011), and decrease of intensity again at 115-130 AU (2011-2014). We perform numerical modeling and an analysis of the data by using our kinetic-MHD heliospheric model (Izmodenov & Alexashov, 2015) and the radiative transfer code (Quemerais, 2000). It is shown that the data obtained up to 90 AU (before 2003) can be fitted by the model quite well. After that the model predicts decrease of intensity, while the data show almost constant values. This behavior can be explained by addition to the model some portion of isotropic "extraheliospheric" Lyman-alpha emission, which does not scattered in the heliosphere and does not depend on the solar Lyman-alpha flux.

  1. Southern Hemisphere Additional Ozonesondes (SHADOZ) 1998-2000 tropical ozone climatology 1. Comparison with Total Ozone Mapping Spectrometer (TOMS) and ground-based measurements

    NASA Astrophysics Data System (ADS)

    Thompson, Anne M.; Witte, Jacquelyn C.; McPeters, Richard D.; Oltmans, Samuel J.; Schmidlin, Francis J.; Logan, Jennifer A.; Fujiwara, Masatomo; Kirchhoff, Volker W. J. H.; Posny, FrançOise; Coetzee, Gert J. R.; Hoegger, Bruno; Kawakami, Shuji; Ogawa, Toshihiro; Johnson, Bryan J.; VöMel, Holger; Labow, Gordon

    2003-01-01

    A network of 10 southern hemisphere tropical and subtropical stations, designated the Southern Hemisphere Additional Ozonesondes (SHADOZ) project and established from operational sites, provided over 1000 ozone profiles during the period 1998-2000. Balloon-borne electrochemical concentration cell (ECC) ozonesondes, combined with standard radiosondes for pressure, temperature, and relative humidity measurements, collected profiles in the troposphere and lower to midstratosphere at: Ascension Island; Nairobi, Kenya; Irene, South Africa; Réunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristóbal, Galapagos; and Natal, Brazil. The archived data are available at: . In this paper, uncertainties and accuracies within the SHADOZ ozone data set are evaluated by analyzing: (1) imprecisions in profiles and in methods of extrapolating ozone above balloon burst; (2) comparisons of column-integrated total ozone from sondes with total ozone from the Earth-Probe/Total Ozone Mapping Spectrometer (TOMS) satellite and ground-based instruments; and (3) possible biases from station to station due to variations in ozonesonde characteristics. The key results are the following: (1) Ozonesonde precision is 5%. (2) Integrated total ozone column amounts from the sondes are usually to within 5% of independent measurements from ground-based instruments at five SHADOZ sites and overpass measurements from the TOMS satellite (version 7 data). (3) Systematic variations in TOMS-sonde offsets and in ground-based-sonde offsets from station to station reflect biases in sonde technique as well as in satellite retrieval. Discrepancies are present in both stratospheric and tropospheric ozone. (4) There is evidence for a zonal wave-one pattern in total and tropospheric ozone, but not in stratospheric ozone.

  2. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  3. Application of the deletion/substitution/addition algorithm to selecting land use regression models for interpolating air pollution measurements in California

    NASA Astrophysics Data System (ADS)

    Beckerman, Bernardo S.; Jerrett, Michael; Martin, Randall V.; van Donkelaar, Aaron; Ross, Zev; Burnett, Richard T.

    2013-10-01

    Land use regression (LUR) models are widely employed in health studies to characterize chronic exposure to air pollution. The LUR is essentially an interpolation technique that employs the pollutant of interest as the dependent variable with proximate land use, traffic, and physical environmental variables used as independent predictors. Two major limitations with this method have not been addressed: (1) variable selection in the model building process, and (2) dealing with unbalanced repeated measures. In this paper, we address these issues with a modeling framework that implements the deletion/substitution/addition (DSA) machine learning algorithm that uses a generalized linear model to average over unbalanced temporal observations. Models were derived for fine particulate matter with aerodynamic diameter of 2.5 microns or less (PM2.5) and nitrogen dioxide (NO2) using monthly observations. We used 4119 observations at 108 sites and 15,301 observations at 138 sites for PM2.5 and NO2, respectively. We derived models with good predictive capacity (cross-validated-R2 values were 0.65 and 0.71 for PM2.5 and NO2, respectively). By addressing these two shortcomings in current approaches to LUR modeling, we have developed a framework that minimizes arbitrary decisions during the model selection process. We have also demonstrated how to integrate temporally unbalanced data in a theoretically sound manner. These developments could have widespread applicability for future LUR modeling efforts.

  4. Determination of fluorine and chlorine in geological materials by induction furnace pyrohydrolysis and standard-addition ion-selective electrode measurement.

    PubMed

    Rice, T D

    1988-03-01

    Fluorine and chlorine in geological materials are volatilized by pyrohydrolysis at about 1150 degrees in a stream of oxygen (1000 ml/min) plus steam in an induction furnace. The catalyst is a 7:2:1 mixture of silica gel, tungstic oxide and potassium dihydrogen phosphate. The sample/catalyst mixture is pyrohydrolysed in a re-usable alumina crucible (already containing four drops of 1 + 3 phosphoric acid) inserted in a silica-enclosed graphite crucible. The absorption solution is buffered at pH 6.5 and spiked with 1.6 mug of fluoride and 16 mug of chloride per g of solution, to ensure rapid and linear electrode response during subsequent standard-addition measurement. The simple plastic absorption vessel has 99.5% efficiency. The 3s limits of detection are 5-10 mug/g and 40-100 mug/g for fluorine and chlorine respectively. The procedure is unsuitable for determining chlorine in coal. PMID:18964490

  5. Effects of water additions, chemical amendments, and plants on in situ measures of nutrient bioavailability in calcareous soils of southeastern Utah, USA

    USGS Publications Warehouse

    Miller, M.E.; Belnap, J.; Beatty, S.W.; Webb, B.L.

    2006-01-01

    We used ion-exchange resin bags to investigate effects of water additions, chemical amendments, and plant presence on in situ measures of nutrient bioavailability in conjunction with a study examining soil controls of ecosystem invasion by the exotic annual grass Bromus tectorum L. At five dryland sites in southeastern Utah, USA, resin bags were buried in experimental plots randomly assigned to combinations of two watering treatments (wet and dry), four chemical-amendment treatments (KCl, MgO, CaO, and no amendment), and four plant treatments (B. tectorum alone, the perennial bunchgrass Stipa hymenoides R. & S. alone, B. tectorum and S. hymenoides together, and no plants). Resin bags were initially buried in September 1997; replaced in January, April, and June 1998; and removed at the end of the study in October 1998. When averaged across watering treatments, plots receiving KCl applications had lower resin-bag NO 3- than plots receiving no chemical amendments during three of four measurement periods-probably due to NO 3- displacement from resin bags by Cl- ions. During the January-April period, KCl application in wet plots (but not dry plots) decreased resin-bag NH 4+ and increased resin-bag NO 3- . This interaction effect likely resulted from displacement of NH 4+ from resins by K+ ions, followed by nitrification and enhanced NO 3- capture by resin bags. In plots not receiving KCl applications, resin-bag NH 4+ was higher in wet plots than in dry plots during the same period. During the January-April period, resin-bag measures for carbonate-related ions HPO 42- , Ca2+, and Mn2+ tended to be greater in the presence of B. tectorum than in the absence of B. tectorum. This trend was evident only in wet plots where B. tectorum densities were much higher than in dry plots. We attribute this pattern to the mobilization of carbonate-associated ions by root exudates of B. tectorum. These findings indicate the importance of considering potential indirect effects of soil

  6. The Value of Extracurricular Support in Increased Student Achievement: An Assessment of a Pupil Personnel Model Including School Counselors and School Psychologists Concerning Student Achievement as Measured by an Academic Performance Index

    ERIC Educational Resources Information Center

    Goodman, Greg S.; Young, I. Phillip

    2006-01-01

    This study examined two models of extra-curricular support for enhancing the academic achievement of students as measured by state mandated test scores. One management model includes the use of school counselors as enhancers of the educational process while the other model addresses the contribution of school psychologists. To differentiate…

  7. Tabulated pressure measurements of a NASA supercritical-wing research airplane model with and without fuselage area-rule additions at Mach 0.25 to 1.00

    NASA Technical Reports Server (NTRS)

    Harris, C. D.; Bartlett, D. W.

    1972-01-01

    Basic pressure measurements were made on a 0.087-scale model of a supercritical wing research airplane in the Langley 8 foot transonic pressure tunnel at Mach numbers from 0.25 to 1.00 to determine the effects on the local aerodynamic loads over the wing and rear fuselage of area-rule additions to the sides of the fuselage. In addition, pressure measurements over the surface of the area-rule additions themselves were obtained at angles of sideslip of approximately - 5 deg, 0 deg, and 5 deg to aid in the structural design of the additions. Except for representative figures, results are presented in tabular form without analysis.

  8. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2011-05-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  9. Straightness error evaluation of additional constraints

    NASA Astrophysics Data System (ADS)

    Pei, Ling; Wang, Shenghuai; Liu, Yong

    2010-12-01

    A new generation of Dimensional and Geometrical Product Specifications (GPS) and Verification standard system is based on both the Mathematical structure and the Metrology. To determine the eligibility of the product should be adapt to modern digital measuring instruments. But in mathematizating measurement when the geometric tolerance specifications has additional constraints requirement, such as straightness with an additional constraint, required to qualify the additional form requirements of the feature within the tolerance zone. Knowing how to close the geometrical specification to the functional specification will result in the correctness of measurement results. Adopting the methodology to evaluate by analyzing various forms including the ideal features and the extracted features and their combinations in an additional form constraint of the straightness in tolerance zone had been found correctly acceptance decision for products. The results show that different combinations of the various forms had affected acceptance on the product qualification and the appropriate forms matching can meet the additional form requirements for product features.

  10. Pump apparatus including deconsolidator

    SciTech Connect

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  11. Optical modulator including grapene

    DOEpatents

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  12. The Global Precipitation Measurement (GPM) Microwave Imager Polarimetric (GMI-P); 10 - 183 GHz with Polarimetric channels including digital and analog back-ends: Ardeshir Art Azarbarzin, Sergey Krimchansky Jeff Piepmeir NASA Goddard Space Flight Center, Greenbelt, MD 20771 USA

    NASA Astrophysics Data System (ADS)

    Azarbarzin, A.

    2014-12-01

    The Global Precipitation Measurement (GPM) Microwave Imager Polarimetric (GMI-P) will be an instrument covering 10, 18, 23, 36, 89, 166 and 183 GHz with polarimetric channels on 10, 18 and 36 GHz channels. The GMI-P (or VWPIR) will have 13 analog channels and 12 digital channels. This instrument builds upon the success of GPM Microwave Imager (GMI) flying on the Global Precipitation Measurement (GPM) launched in Feb 2014. And with GMI-P for the first time we can compare performance of digital and analog channels for 10, 18 and 36 channels. The GMI-P is recently renamed "Vector Wind Precipitation Imaging Radiometer (VWPIR). The instrument is a passive microwave with 1.2 m diameter reflector with 4-point hot/cold calibration capability in orbit. GMI-P (VWPIR) will provides measurements of precipitation intensity and distribution in addition to wind vector and speed. The Receivers, and multiple feedhorn tray rotate with the reflector at 32 RPM. The GMI-P will have capabilities as good as Windsat with added cyclone intensity and snow/ice measurement capability. This instrument will have a 2-Look capability (front and back) as well which will reduce uncertainty of reducing calibration accuracy further.

  13. Valuation of Green Walls and Green Roofs as Soundscape Measures: Including Monetised Amenity Values Together with Noise-attenuation Values in a Cost-benefit Analysis of a Green Wall Affecting Courtyards

    PubMed Central

    Veisten, Knut; Smyrnova, Yuliya; Klæboe, Ronny; Hornikx, Maarten; Mosslemi, Marjan; Kang, Jian

    2012-01-01

    Economic unit values of soundscape/acoustic effects have been based on changes in the number of annoyed persons or on decibel changes. The normal procedure has been the application of these unit values to noise-attenuation measures affecting the noisier façade of a dwelling. Novel modular vegetation-based soundscape measures, so-called green walls, might be relevant for both noisy and quieter areas. Moreover, their benefits will comprise noise attenuation as well as non-acoustic amenity effects. One challenge is to integrate the results of some decades of non-acoustic research on the amenity value of urban greenery into design of the urban sound environment, and incorporate these non-acoustic properties in the overall economic assessment of noise control and overall sound environment improvement measures. Monetised unit values for green walls have been included in two alternative cases, or demonstration projects, of covering the entrances to blocks of flats with a green wall. Since these measures improve the noise environment on the quiet side of the dwellings and courtyards, not the most exposed façade, adjustment factors to the nominal quiet side decibel reductions to arrive at an estimate of the equivalent overall acoustic improvement have been applied. A cost-benefit analysis of the green wall case indicates that this measure is economically promising, when valuing the noise attenuation in the quieter area and adding the amenity/aesthetic value of the green wall. PMID:23202816

  14. Valuation of green walls and green roofs as soundscape measures: including monetised amenity values together with noise-attenuation values in a cost-benefit analysis of a green wall affecting courtyards.

    PubMed

    Veisten, Knut; Smyrnova, Yuliya; Klæboe, Ronny; Hornikx, Maarten; Mosslemi, Marjan; Kang, Jian

    2012-11-01

    Economic unit values of soundscape/acoustic effects have been based on changes in the number of annoyed persons or on decibel changes. The normal procedure has been the application of these unit values to noise-attenuation measures affecting the noisier façade of a dwelling. Novel modular vegetation-based soundscape measures, so-called green walls, might be relevant for both noisy and quieter areas. Moreover, their benefits will comprise noise attenuation as well as non-acoustic amenity effects. One challenge is to integrate the results of some decades of non-acoustic research on the amenity value of urban greenery into design of the urban sound environment, and incorporate these non-acoustic properties in the overall economic assessment of noise control and overall sound environment improvement measures. Monetised unit values for green walls have been included in two alternative cases, or demonstration projects, of covering the entrances to blocks of flats with a green wall. Since these measures improve the noise environment on the quiet side of the dwellings and courtyards, not the most exposed façade, adjustment factors to the nominal quiet side decibel reductions to arrive at an estimate of the equivalent overall acoustic improvement have been applied. A cost-benefit analysis of the green wall case indicates that this measure is economically promising, when valuing the noise attenuation in the quieter area and adding the amenity/aesthetic value of the green wall.

  15. Listening to Include

    ERIC Educational Resources Information Center

    Veck, Wayne

    2009-01-01

    This paper attempts to make important connections between listening and inclusive education and the refusal to listen and exclusion. Two lines of argument are advanced. First, if educators and learners are to include each other within their educational institutions as unique individuals, then they will need to listen attentively to each other.…

  16. 30 CFR 250.406 - What additional safety measures must I take when I conduct drilling operations on a platform that...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... when I conduct drilling operations on a platform that has producing wells or has other hydrocarbon flow... hydrocarbon flow? You must take the following safety measures when you conduct drilling operations on a platform with producing wells or that has other hydrocarbon flow: (a) You must install an...

  17. An Analysis of Potential Additional Measures of Fiscal Capacity of South Dakota School Districts. Papers in Education Finance, No. 13. Revised.

    ERIC Educational Resources Information Center

    Vincent, Phillip E.; Adams, E. Kathleen

    To help South Dakota develop new measures of school district fiscal capacity (besides assessed value per pupil) to use in its state school aid formula, researchers used multiple regression analysis to examine the effects on district expenditure per pupil of each district's average family income and of the composition of the property tax base. Also…

  18. RARE DECAYS INCLUDING PENGUINS

    SciTech Connect

    Eigen, G

    2003-12-04

    The authors present a preliminary measurement of the exclusive charmless semileptonic B decays, B {yields} {rho}{ell}{nu}, and the extraction of the CKM parameters V{sub ub}. IN a data sample of 55 x 10{sup 6} B{bar B} events they measure a branching fraction of {Beta}(B {yields} {rho}{ell}{nu}) = (3.39 {+-} 0.44{sub stat} {+-} 0.52{sub sys} {+-} 0.60{sub th}) x 10{sup -4} yielding |V{sub ub}| = (3.69 {+-} 0.23{sub stat} {+-} 0.27{sub sys -0.59th}{sup +0.40}) x 10{sup -3}. Next, they report on a preliminary study of the radiative penguin modes B {yields} K{ell}{sup +}{ell}{sup -} and B {yields} K*{ell}{sup +}{ell}{sup -}. In a data sample of 84 x 10{sup 6} B{bar B} events they observe a significant signal (4.4{sigma}) in B {yields} K{ell}{sup +}{ell}{sup -}, yielding a branching fraction of {Beta}(B {yields} K{ell}{sup +}{ell}{sup -}) = (0.78{sub -0.20-0.18}{sup +0.24+0.11}) x 10{sup -6}. In B {yields} K*{ell}{sup +}{ell}{sup -} the observed yield is not yet significant (2.8{sigma}), yielding an upper limit of the branching fraction of {Beta}(B {yields} K*{ell}{sup +}{ell}{sup -}) 3.0 x 10{sup -6} {at} 90% confidence level. Finally, they summarize preliminary results of searches for B {yields} {rho}({omega}){gamma}, B{sup +} {yields} K{sup +} {nu}{bar {nu}} and B{sup 0} {yields} {ell}{sup +}{ell}{sup -}.

  19. STELLAR DIAMETERS AND TEMPERATURES. III. MAIN-SEQUENCE A, F, G, AND K STARS: ADDITIONAL HIGH-PRECISION MEASUREMENTS AND EMPIRICAL RELATIONS

    SciTech Connect

    Boyajian, Tabetha S.; Jones, Jeremy; White, Russel; McAlister, Harold A.; Gies, Douglas; Von Braun, Kaspar; Van Belle, Gerard; Farrington, Chris; Schaefer, Gail; Ten Brummelaar, Theo A.; Sturmann, Laszlo; Sturmann, Judit; Turner, Nils H.; Goldfinger, P. J.; Vargas, Norm; Ridgway, Stephen

    2013-07-01

    Based on CHARA Array measurements, we present the angular diameters of 23 nearby, main-sequence stars, ranging from spectral types A7 to K0, 5 of which are exoplanet host stars. We derive linear radii, effective temperatures, and absolute luminosities of the stars using Hipparcos parallaxes and measured bolometric fluxes. The new data are combined with previously published values to create an Angular Diameter Anthology of measured angular diameters to main-sequence stars (luminosity classes V and IV). This compilation consists of 125 stars with diameter uncertainties of less than 5%, ranging in spectral types from A to M. The large quantity of empirical data is used to derive color-temperature relations to an assortment of color indices in the Johnson (BVR{sub J} I{sub J} JHK), Cousins (R{sub C} I{sub C}), Kron (R{sub K} I{sub K}), Sloan (griz), and WISE (W{sub 3} W{sub 4}) photometric systems. These relations have an average standard deviation of {approx}3% and are valid for stars with spectral types A0-M4. To derive even more accurate relations for Sun-like stars, we also determined these temperature relations omitting early-type stars (T{sub eff} > 6750 K) that may have biased luminosity estimates because of rapid rotation; for this subset the dispersion is only {approx}2.5%. We find effective temperatures in agreement within a couple of percent for the interferometrically characterized sample of main-sequence stars compared to those derived via the infrared flux method and spectroscopic analysis.

  20. Broadband Screening for Interstellar Species: Additional Laboratory Measurements and Interstellar Detection of Ethanimine (CH3CHNH) in Sgr B2(N) Using GBT PRIMOS Survey Data

    NASA Astrophysics Data System (ADS)

    Loomis, Ryan; Zaleski, D.; Steber, A.; Neill, J.; Muckle, M. T.; Harris, B. J.; Seifert, N.; Pate, B.; Lattanzi, V.; Martinez, O.; McCarthy, M. C.; Remijan, A. J.

    2013-01-01

    As the availability of publicly accessible spectral line surveys from radio astronomy increases, new approaches to the identification of molecules in the interstellar medium are possible. We have performed reaction product screening measurements using broadband rotational spectroscopy to identify potential matches in the laboratory and radio astronomy spectra. A broadband spectrum of an electrical discharge of CH3CN and H2S contained several matches to unidentified features in the GBT PRIMOS Survey1 of Sgr B2(N) that did not have molecular assignments in the radio astronomy spectral catalogs. These transitions have been assigned to the E- and Z-isomers of ethanimine (CH3CHNH). The rotational spectrum of the E- and Z-isomers of CH3CHNH have been reported at mm-wave frequencies in 1980 by Lovas et al.2 and then in 1981 by Brown et al.3 The analysis of the rotational spectra of these two isomers has been extended to the microwave frequency region to verify the assignments from the GBT PRIMOS Survey. Combined fits over the range of 8 to 130GHz consisting of data from Lovas et al., broadband CP-FTMW measurements, and cavity double resonance measurements are presented for both isomers. Evidence for the detection of both isomers in Sgr B2(N) is shown along with a discussion of the method of their detection and a brief analysis of possible formation routes. 1. GBT PRIMOS Survey, http://www.cv.nrao.edu aremijan/PRIMOS 2. F.J. Lovas, R.D. Suenram, D.R. Johnson, F.O. Clark, E. Tiemann, J. Chem. Phys., 72, 4964-4972, (1980). 3. R.D. Brown, P.D. Godfrey, D.A. Winkler, Chem. Phys., 59, 243-247, (1981).

  1. Optimal wavelengths obtained from laws analogous to the Wien's law for monospectral and bispectral methods, and general methodology for multispectral temperature measurements taking into account global transfer function including non-uniform emissivity of surfaces

    NASA Astrophysics Data System (ADS)

    Rodiet, Christophe; Remy, Benjamin; Degiovanni, Alain

    2016-05-01

    In this paper, it is shown how to select the optimal wavelengths minimizing the relative error and the standard deviation of the temperature. Furthermore, it is shown that the optimal wavelengths in mono-spectral and bi-spectral methods (for a Planck's law) can be determined by laws analogous to the displacement Wien's law. The simplicity of these laws can thus allow real-time selection of optimal wavelengths for a control/optimization of industrial processes, for example. A more general methodology to obtain the optimal wavelengths selection in a multi-spectral method (taking into account the spectral variations of the global transfer function including the emissivity variations) for temperature measurement of surfaces exhibiting non-uniform emissivity, is also presented. This latter can then find an interest in glass furnaces temperature measurement with spatiotemporal non-uniformities of emissivity, the control of biomass pyrolysis, the surface temperature measurement of buildings or heating devices, for example. The goal consists of minimizing the standard deviation of the estimated temperature (optimal design experiment). For the multi-spectral method, two cases will be treated: optimal global and optimal constrained wavelengths selection (to the spectral range of the detector, for example). The estimated temperature results obtained by different models and for different number of parameters and wavelengths are compared. These different points are treated from theoretical, numerical and experimental points of view.

  2. Additive and epistatic genome-wide association for growth and ultrasound scan measures of carcass-related traits in Brahman cattle.

    PubMed

    Ali, A A; Khatkar, M S; Kadarmideen, H N; Thomson, P C

    2015-04-01

    Genome-wide association studies are routinely used to identify genomic regions associated with traits of interest. However, this ignores an important class of genomic associations, that of epistatic interactions. A genome-wide interaction analysis between single nucleotide polymorphisms (SNPs) using highly dense markers can detect epistatic interactions, but is a difficult task due to multiple testing and computational demand. However, It is important for revealing complex trait heredity. This study considers analytical methods that detect statistical interactions between pairs of loci. We investigated a three-stage modelling procedure: (i) a model without the SNP to estimate the variance components; (ii) a model with the SNP using variance component estimates from (i), thus avoiding iteration; and (iii) using the significant SNPs from (ii) for genome-wide epistasis analysis. We fitted these three-stage models to field data for growth and ultrasound measures for subcutaneous fat thickness in Brahman cattle. The study demonstrated the usefulness of modelling epistasis in the analysis of complex traits as it revealed extra sources of genetic variation and identified potential candidate genes affecting the concentration of insulin-like growth factor-1 and ultrasound scan measure of fat depth traits. Information about epistasis can add to our understanding of the complex genetic networks that form the fundamental basis of biological systems. PMID:25754883

  3. Additive and epistatic genome-wide association for growth and ultrasound scan measures of carcass-related traits in Brahman cattle.

    PubMed

    Ali, A A; Khatkar, M S; Kadarmideen, H N; Thomson, P C

    2015-04-01

    Genome-wide association studies are routinely used to identify genomic regions associated with traits of interest. However, this ignores an important class of genomic associations, that of epistatic interactions. A genome-wide interaction analysis between single nucleotide polymorphisms (SNPs) using highly dense markers can detect epistatic interactions, but is a difficult task due to multiple testing and computational demand. However, It is important for revealing complex trait heredity. This study considers analytical methods that detect statistical interactions between pairs of loci. We investigated a three-stage modelling procedure: (i) a model without the SNP to estimate the variance components; (ii) a model with the SNP using variance component estimates from (i), thus avoiding iteration; and (iii) using the significant SNPs from (ii) for genome-wide epistasis analysis. We fitted these three-stage models to field data for growth and ultrasound measures for subcutaneous fat thickness in Brahman cattle. The study demonstrated the usefulness of modelling epistasis in the analysis of complex traits as it revealed extra sources of genetic variation and identified potential candidate genes affecting the concentration of insulin-like growth factor-1 and ultrasound scan measure of fat depth traits. Information about epistasis can add to our understanding of the complex genetic networks that form the fundamental basis of biological systems.

  4. Seismic Absorption and Modulus Measurements in Porous Rocks in Lab and Field: Physical, Chemical, and Biological Effects of Fluids (Detecting a Biosurfactant Additive in a Field Irrigation Experiment)

    SciTech Connect

    Spetzler, Hartmut

    2006-05-01

    We have been exploring a new technology that is based on using low-frequency seismic attenuation data to monitor changes in fluid saturation conditions in two-fluid phase porous materials. The seismic attenuation mechanism is related to the loss of energy due to the hysteresis of resistance to meniscus movement (changes in surface tension, wettability) when a pore containing two fluids is stressed at very low frequencies (< 10 Hz). This technology has potential applications to monitoring changes in (1) leakage at buried waste sites, (2) contaminant remediation, and (3) flooding during enhanced petroleum recovery. We have concluded a three year field study at the Maricopa Agricultural Center site of the University of Arizona. Three sets of instruments were installed along an East-West line perpendicular to the 50m by 50m inigation site. Each set of instruments consisted of one three component seismometer and one tiltmeter. Microseisms and solid Earth-tides served as strain sources. The former have a power peak at a period of about 6 seconds and the tides have about two cycles per day. Installation of instruments commenced in late summer of 2002. The instruments operated nearly continuously until April 2005. During the fall of 2003 the site was irrigated with water and one year later with water containing 150 ppm of a biosurfactant additive. This biodegradable additive served to mimic a class of contaminants that change the surface tension of the inigation fluid. Tilt data clearly show tidal tilts superimposed on local tilts due to agricultural irrigation and field work. When the observed signals were correlated with site specific theoretical tilt signals we saw no anomalies for the water irrigation in 2003, but large anomalies on two stations for the surfactant irrigation in 2004. Occasional failures of seismometers as well as data acquisition systems contributed to less than continuous coverage. These data are noisier than the tilt data, but do also show possible

  5. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  6. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  7. Measurements of fiducial cross-sections for tt¯ production with one or two additional b-jets in pp collisions at √s = 8 TeV using the ATLAS detector

    DOE PAGES

    Aad, G.; Abbott, B.; Abdallah, J.; Abdinov, O.; Aben, R.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; et al

    2016-01-07

    Fiducial cross-sections for tt¯ production with one or two additional b -jets are reported, using an integrated luminosity of 20.3 fb–1 of proton–proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for tt¯ events with at least one additional b-jet is measured to be 950 ± 70 (stat.) +240-190 (syst.) fb in the lepton-plus-jets channel and 50 ± 10 (stat.) +15-10 (syst.) fb in the eμ channel. The cross-section times branching ratio for events with at least two additional b -jets is measured to bemore » 19.3 ± 3.5 (stat.) ± 5.7 (syst.) fb in the dilepton channel ( eμ , μμ , and ee ) using a method based on tight selection criteria, and 13.5 ± 3.3 (stat.) ± 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 ± 0.33 (stat.) ± 0.28 (syst.)% for the ratio of tt¯ production with two additional b-jets to tt¯ production with any two additional jets. As a result, all measurements are in good agreement with recent theory predictions.« less

  8. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  9. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  10. [Patch-testing methods: additional specialised or additional series].

    PubMed

    Cleenewerck, M-B

    2009-01-01

    The tests in the European standard battery must occasionally be supplemented by specialised or additional batteries, particularly where the contact allergy is thought to be of occupational origin. These additional batteries cover all allergens associated with various professional activities (hairdressing, baking, dentistry, printing, etc.) and with different classes of materials and chemical products (glue, plastic, rubber...). These additional tests may also include personal items used by patients on a daily basis such as cosmetics, shoes, plants, textiles and so on.

  11. 40 CFR 62.14431 - What must my waste management plan include?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... management measures, taking into account the effectiveness of waste management measures already in place, the costs of additional measures, the emission reductions expected to be achieved, and any other potential... include? 62.14431 Section 62.14431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  12. 40 CFR 62.14431 - What must my waste management plan include?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... management measures, taking into account the effectiveness of waste management measures already in place, the costs of additional measures, the emission reductions expected to be achieved, and any other potential... include? 62.14431 Section 62.14431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  13. Evaluating Additive Interaction Using Survival Percentiles.

    PubMed

    Bellavia, Andrea; Bottai, Matteo; Orsini, Nicola

    2016-05-01

    Evaluation of statistical interaction in time-to-event analysis is usually limited to the study of multiplicative interaction, via inclusion of a product term in a Cox proportional-hazard model. Measures of additive interaction are available but seldom used. All measures of interaction in survival analysis, whether additive or multiplicative, are in the metric of hazard, usually assuming that the interaction between two predictors of interest is constant during the follow-up period. We introduce a measure to evaluate additive interaction in survival analysis in the metric of time. This measure can be calculated by evaluating survival percentiles, defined as the time points by which different subpopulations reach the same incidence proportion. Using this approach, the probability of the outcome is fixed and the time variable is estimated. We also show that by using a regression model for the evaluation of conditional survival percentiles, including a product term between the two exposures in the model, interaction is evaluated as a deviation from additivity of the effects. In the simple case of two binary exposures, the product term is interpreted as excess/decrease in survival time (i.e., years, months, days) due to the presence of both exposures. This measure of interaction is dependent on the fraction of events being considered, thus allowing evaluation of how interaction changes during the observed follow-up. Evaluation of interaction in the context of survival percentiles allows deriving a measure of additive interaction without assuming a constant effect over time, overcoming two main limitations of commonly used approaches.

  14. Sarks as additional fermions

    NASA Astrophysics Data System (ADS)

    Agrawal, Jyoti; Frampton, Paul H.; Jack Ng, Y.; Nishino, Hitoshi; Yasuda, Osamu

    1991-03-01

    An extension of the standard model is proposed. The gauge group is SU(2) X ⊗ SU(3) C ⊗ SU(2) S ⊗ U(1) Q, where all gauge symmetries are unbroken. The colour and electric charge are combined with SU(2) S which becomes strongly coupled at approximately 500 GeV and binds preons to form fermionic and vector bound states. The usual quarks and leptons are singlets under SU(2) X but additional fermions, called sarks. transform under it and the electroweak group. The present model explains why no more than three light quark-lepton families can exist. Neutral sark baryons, called narks, are candidates for the cosmological dark matter having the characteristics designed for WIMPS. Further phenomenological implications of sarks are analyzed i including electron-positron annihilation. Z 0 decay, flavor-changing neutral currents. baryon-number non-conservation, sarkonium and the neutron electric dipole moment.

  15. Employment, Training, and Literacy Enhancement Act of 1997. Report of the Committee on Education and the Workforce, House of Representatives, on H.R. 1385 Together with Additional and Dissenting Views [Including Cost Estimate of the Congressional Budget Office], 105th Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Committee on Education and the Workforce.

    This document contains the text of the Employment, Training, and Literacy Enhancement Act of 1997, as amended by committee, including the titles that cover the following: general provisions; employment and training programs for disadvantaged youth; federally administered programs; adult education programs; miscellaneous provisions; the State Human…

  16. Measuring $\

    SciTech Connect

    Mitchell, Jessica Sarah

    2011-01-01

    The MINOS Experiment consists of two steel-scintillator calorimeters, sampling the long baseline NuMI muon neutrino beam. It was designed to make a precise measurement of the ‘atmospheric’ neutrino mixing parameters, Δm2 atm. and sin2 (2 atm.). The Near Detector measures the initial spectrum of the neutrino beam 1km from the production target, and the Far Detector, at a distance of 735 km, measures the impact of oscillations in the neutrino energy spectrum. Work performed to validate the quality of the data collected by the Near Detector is presented as part of this thesis. This thesis primarily details the results of a vμ disappearance analysis, and presents a new sophisticated fitting software framework, which employs a maximum likelihood method to extract the best fit oscillation parameters. The software is entirely decoupled from the extrapolation procedure between the detectors, and is capable of fitting multiple event samples (defined by the selections applied) in parallel, and any combination of energy dependent and independent sources of systematic error. Two techniques to improve the sensitivity of the oscillation measurement were also developed. The inclusion of information on the energy resolution of the neutrino events results in a significant improvement in the allowed region for the oscillation parameters. The degree to which sin2 (2θ )= 1.0 could be disfavoured with the exposure of the current dataset if the true mixing angle was non-maximal, was also investigated, with an improved neutrino energy reconstruction for very low energy events. The best fit oscillation parameters, obtained by the fitting software and incorporating resolution information were: | Δm2| = 2.32+0.12 -0.08×10-3 eV2 and sin2 (2θ ) > 0.90(90% C.L.). The analysis provides the current world best measurement of the atmospheric neutrino mass

  17. Stable Carbon Isotope Ratios and Mixing Ratios of Several VOC Including n-Hexane, Benzene, Toluene, p-Xylene, n-Octane, and n-Decane Measured During the Border Air Quality Study Campaign (June-July, 2007)

    NASA Astrophysics Data System (ADS)

    Kornilova, A.; Moukhtar, S.; Huang, L.; Rudolph, J.

    2008-12-01

    Many important secondary pollutants are formed during the oxidation of Volatile Organic Compounds (VOC) in the atmosphere. These organic compounds can contribute significant mass to atmospheric particulate matter (PM) and therefore impact physical properties and composition of aerosols. Despite numerous studies, the formation processes for atmospheric PM are still not well understood. While there have been very extensive laboratory investigations of PM formation, nearly all of these studies have been conducted at VOC concentrations which exceed ambient atmospheric levels by several orders of magnitude. Consequently there is substantial uncertainty in the extrapolation of laboratory results to the atmosphere. Recently it has been demonstrated that stable carbon isotopic composition measurements can be very valuable in providing increased insight into the chemical and transport processes of VOC in the troposphere. Studies showed that isotope ratio measurements could aid in the determination of photochemical processing of individual VOC. It is expected that applying isotope measurements to studies of VOC oxidation products in the atmosphere will allow to establish quantitative relationship between the amount of precursor oxidized and the concentration of secondary pollutants formed during this process. Thus, the yield of secondary organic aerosols (SOA) from this reaction can be calculated. A cartridge technique was developed for field sampling of VOC and subsequent laboratory analysis by gas chromatography coupled with isotope ratio mass spectrometry. It was first implemented during the BAQS field study (June-July, 2007) parallel to PM sampling. Stable carbon isotopic composition and concentrations of several VOC were determined and compared to those of PM. The results of these measurements will be presented and discussed.

  18. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  19. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  20. Evaluating Three Different Methods of Determining Addition in Presbyopia

    PubMed Central

    Yazdani, Negareh; Khorasani, Abbas Azimi; Moghadam, Hanieh Mirhajian; Yekta, Abbas Ali; Ostadimoghaddam, Hadi; Shandiz, Javad Heravian

    2016-01-01

    Purpose: To compare three different methods for determining addition in presbyopes. Methods: The study included 81 subjects with presbyopia who aged 40-70 years. Reading addition values were measured using 3 approaches including the amplitude of accommodation (AA), dynamic retinoscopy (DR), and increasing plus lens (IPL). Results: IPL overestimated reading addition relative to other methods. Mean near addition obtained by AA, DR and IPL were 1.31, 1.68 and 1.77, respectively. Our results showed that IPL method could provide 20/20 vision at near in the majority of presbyopic subjects (63.4%). Conclusion: The results were approximately the same for 3 methods and provided comparable final addition; however, mean near additions were higher with increasing plus lens compared with the other two methods. In presbyopic individuals, increasing plus lens is recommended as the least time-consuming method with the range of ±0.50 diopter at the 40 cm working distance. PMID:27621785

  1. Communications circuit including a linear quadratic estimator

    DOEpatents

    Ferguson, Dennis D.

    2015-07-07

    A circuit includes a linear quadratic estimator (LQE) configured to receive a plurality of measurements a signal. The LQE is configured to weight the measurements based on their respective uncertainties to produce weighted averages. The circuit further includes a controller coupled to the LQE and configured to selectively adjust at least one data link parameter associated with a communication channel in response to receiving the weighted averages.

  2. Multiple biomarkers including cardiac troponins T and I measured by high-sensitivity assays, as predictors of long-term mortality in patients with chronic renal failure who underwent dialysis.

    PubMed

    Hickman, Peter E; McGill, Darryl; Potter, Julia M; Koerbin, Gus; Apple, Fred S; Talaulikar, Girish

    2015-06-01

    There is a high cardiac mortality in patients on long-term renal dialysis. No studies have reported long-term outcomes relating to both high-sensitivity cardiac troponin T (hs-cTnT) and high-sensitivity cardiac troponin I (hs-cTnI) in these patients. Patients who underwent long-term dialysis at the Canberra Hospital had blood samples collected for both cardiac and other biomarkers. Samples were stored at -80°C until analysis. Mortality data were collected at 5 years, and univariate and multivariate analyses were performed to identify which biomarkers were predictive of mortality at 5 years. After multivariate analysis, albumin, C-reactive protein (CRP), and hs-cTnT remained independently predictive of all-cause mortality, with hs-cTnT having the highest hazard ratio. If hs-cTnT was excluded from the analysis, then hs-cTnI was independently predictive of mortality. For hs-cTnT, for both genders, the ninety-ninth percentile, derived from a population with subjects with subclinical disease excluded, served as an excellent partition between survivors and nonsurvivors. Receiver-operating characteristic curve analysis for hs-cTnT had area under the curve of 0.798 and for hs-cTnI of 0.774. Kaplan-Meier curves for the aggregation of albumin, CRP, and hs-cTnT showed a stronger predictive power with receiver-operating characteristic area under the curve of 0.805. The addition of echocardiographic data in an analysis of all patients who had an echocardiogram for clinical reasons (n = 105) did not alter the final observations in this subgroup. In conclusion, hs-cTnT retains a superior predictive power in a dialysis-dependent population for identifying those at risk for death and when aggregated with albumin and CRP also has substantial additive value for identifying mortality risk in a renal-dialysis population.

  3. Systematic approach to sonographic evaluation of the pelvis in women with suspected endometriosis, including terms, definitions and measurements: a consensus opinion from the International Deep Endometriosis Analysis (IDEA) group.

    PubMed

    Guerriero, S; Condous, G; van den Bosch, T; Valentin, L; Leone, F P G; Van Schoubroeck, D; Exacoustos, C; Installé, A J F; Martins, W P; Abrao, M S; Hudelist, G; Bazot, M; Alcazar, J L; Gonçalves, M O; Pascual, M A; Ajossa, S; Savelli, L; Dunham, R; Reid, S; Menakaya, U; Bourne, T; Ferrero, S; Leon, M; Bignardi, T; Holland, T; Jurkovic, D; Benacerraf, B; Osuga, Y; Somigliana, E; Timmerman, D

    2016-09-01

    The IDEA (International Deep Endometriosis Analysis group) statement is a consensus opinion on terms, definitions and measurements that may be used to describe the sonographic features of the different phenotypes of endometriosis. Currently, it is difficult to compare results between published studies because authors use different terms when describing the same structures and anatomical locations. We hope that the terms and definitions suggested herein will be adopted in centers around the world. This would result in consistent use of nomenclature when describing the ultrasound location and extent of endometriosis. We believe that the standardization of terminology will allow meaningful comparisons between future studies in women with an ultrasound diagnosis of endometriosis and should facilitate multicenter research. Copyright © 2016 ISUOG. Published by John Wiley & Sons Ltd.

  4. Systematic approach to sonographic evaluation of the pelvis in women with suspected endometriosis, including terms, definitions and measurements: a consensus opinion from the International Deep Endometriosis Analysis (IDEA) group.

    PubMed

    Guerriero, S; Condous, G; van den Bosch, T; Valentin, L; Leone, F P G; Van Schoubroeck, D; Exacoustos, C; Installé, A J F; Martins, W P; Abrao, M S; Hudelist, G; Bazot, M; Alcazar, J L; Gonçalves, M O; Pascual, M A; Ajossa, S; Savelli, L; Dunham, R; Reid, S; Menakaya, U; Bourne, T; Ferrero, S; Leon, M; Bignardi, T; Holland, T; Jurkovic, D; Benacerraf, B; Osuga, Y; Somigliana, E; Timmerman, D

    2016-09-01

    The IDEA (International Deep Endometriosis Analysis group) statement is a consensus opinion on terms, definitions and measurements that may be used to describe the sonographic features of the different phenotypes of endometriosis. Currently, it is difficult to compare results between published studies because authors use different terms when describing the same structures and anatomical locations. We hope that the terms and definitions suggested herein will be adopted in centers around the world. This would result in consistent use of nomenclature when describing the ultrasound location and extent of endometriosis. We believe that the standardization of terminology will allow meaningful comparisons between future studies in women with an ultrasound diagnosis of endometriosis and should facilitate multicenter research. Copyright © 2016 ISUOG. Published by John Wiley & Sons Ltd. PMID:27349699

  5. Measurement and Calculation of Electrochemical Potentials in Hydrogenated High Temperature Water, including an Evaluation of the Yttria-Stabilized Zirconia/Iron-Iron Oxide (Fe/Fe3O4) Probe as Reference Electrode

    SciTech Connect

    Steven A. Attanasio; David S. Morton; Mark A. Ando

    2001-10-22

    The importance of knowing the electrochemical corrosion potential (ECP, also referred to as E{sub con}) of nickel-base alloys in hydrogenated water is related to the need to understand the effects of dissolved (i.e., aqueous) hydrogen concentration ([H{sub 2}]) on primary water stress corrosion cracking (PWSCC). Also, the use of a reference electrode (RE) can improve test quality by heightening the ability to detect instances of out-of-specification or unexpected chemistry. Three methods are used to measure and calculate the ECP of nickel-based alloys in hydrogenated water containing {approx} 1 to 150 scc/kg H{sub 2} (0.1 to 13.6 ppm H{sub 2}) at 260 to 360 C. The three methods are referred to as the specimen/component method, the platinum (Pt) method, and the yttria-stabilized zirconia/iron-iron oxide (YSZ/Fe-Fe{sub 3}O{sub 4}) RE method. The specimen/component method relies upon the assumption that the specimen or component behaves as a hydrogen electrode, and its E{sub corr} is calculated using the Nernst equation. The present work shows that this method is valid for aqueous H{sub 2} levels {ge} {approx} 5 to 10 scc/kg H{sub 2}. The Pt method uses a voltage measurement between the specimen or component and a Pt electrode, with the Pt assumed to behave as a hydrogen electrode; this method is valid as long as the aqueous H{sub 2}level is known. The YSZ/Fe-Fe{sub 3}O{sub 4}, which represents a relatively new approach for measuring E{sub corr} in this environment, can be used even if the aqueous H{sub 2} level is unknown. The electrochemical performance of the YSZ/Fe-Fe{sub 3}O{sub 4} probe supports its viability as a RE for use in high temperature hydrogenated water. Recent design modifications incorporating a teflon sealant have improved the durability of this RE (however, some of the REs do still fail prematurely due to water in-leakage). The Pt method is judged to represent the best overall approach, though there are cases where the other methods are superior

  6. Out of bounds additive manufacturing

    DOE PAGES

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  7. Update of the BIPM comparison BIPM.RI(II)-K1.F-18 of activity measurements of the radionuclide 18F to include the 2010 result of the LNE-LNHB (France)

    NASA Astrophysics Data System (ADS)

    Michotte, C.; Ratel, G.; Courte, S.; Cassette, P.; Moune, M.

    2016-01-01

    Since 2001, six national metrology institutes (NMI) have submitted seven samples of known activity of 18F to the International Reference System (SIR) for activity comparison at the Bureau International des Poids et Mesures (BIPM), with comparison identifier BIPM.RI(II)-K1.F-18. The values of the activity submitted were between about 1 MBq and 18 MBq. The primary standardization result for the LNE-LNHB, France, replaces their earlier result of 2002 and the key comparison reference value (KCRV) has been recalculated. In the frame of the BIPM.RI(II)-K4.F18 comparison, the NPL updated their result in the KCDB. Consequently there are now five results in the BIPM.RI(II)-K1.F-18 comparison. The degrees of equivalence between each equivalent activity measured in the SIR and the updated KCRV have been calculated and the results are given in the form of a table. A graphical presentation is also given. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  8. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  9. Validation and use of a QuEChERS-based gas chromatographic-tandem mass spectrometric method for multiresidue pesticide analysis in blackcurrants including studies of matrix effects and estimation of measurement uncertainty.

    PubMed

    Walorczyk, Stanisław

    2014-03-01

    A triple quadrupole GC-QqQ-MS/MS method was optimized for multiresidue analysis of over 180 pesticides in blackcurrants. The samples were prepared by using a modified quick, easy, cheap, effective, rugged and safe (QuEChERS) analytical protocol. To reduce matrix co-extractives in the final extract, the supernatant was cleaned up by dispersive-solid phase extraction (dispersive-SPE) with a mixture of sorbents: primary secondary amine (PSA), octadecyl (C18) and graphitized carbon black (GCB). The validation results demonstrated fitness for purpose of the streamlined method. The overall recoveries at the three spiking levels of 0.01, 0.05 and 0.2 mg kg(-1) spanned between 70% and 116% (102% on average) with relative standard deviation (RSD) values between 3% and 19% except for chlorothalonil (23%). Response linearity was studied in the range between 0.005 and 0.5 mg kg(-1). The matrix effect for each individual compound was evaluated through the study of ratios of the slopes obtained in solvent and blackcurrant matrix. The optimized method provided small matrix effect (<10%) for 77% of the compounds, whereas only for 14%, 5% and 4% compounds, the matrix effect was 10-20%, 20-30% and >30%, respectively. Following the application of "top-down" approach, the expanded measurement uncertainty was estimated as being 21% on average (coverage factor k=2, confidence level 95%). If compared with samples of other crops, the analyses of blackcurrants revealed a high percentage of exceedance of the legislative maximum residue levels (MRLs), as well as some instances of the detection of pesticides unapproved on this crop.

  10. Food Additives and Hyperkinesis: A Controlled Double-Blind Experiment. (Includes NIE Staff Critique).

    ERIC Educational Resources Information Center

    Conners, C. Keith; And Others

    Fifteen hyperkinetic children (6-12 years old) were involved in a pilot study to test B. Feingold's hypothesis that hyperkinesis may be caused by artificial flavors and colors in food. Prior to treatment, parents and teachers completed bi-weekly questionnaires regarding each Ss' behavior both on medication (pretreatment period) and when medication…

  11. Additions to the knowledge of the land snails of Sabah (Malaysia, Borneo), including 48 new species

    PubMed Central

    Vermeulen, Jaap J.; Liew, Thor-Seng; Schilthuizen, Menno

    2015-01-01

    Abstract We present reviews of the Sabah (Malaysia, on the island of Borneo) species of the following problematical genera of land snails (Mollusca, Gastropoda): Acmella and Anaglyphula (Caenogastropoda: Assimineidae); Ditropopsis (Caenogastropoda: Cyclophoridae); Microcystina (Pulmonata: Ariophantidae); Philalanka and Thysanota (Pulmonata: Endodontidae); Kaliella, Rahula, (Pulmonata: Euconulidae); Trochomorpha and Geotrochus (Pulmonata: Trochomorphidae). Next to this, we describe new species in previously revised genera, such as Diplommatina (Diplommatinidae); Georissa (Hydrocenidae); as well as some new species of genera not revised previously, such as Japonia (Cyclophoridae); Durgella and Dyakia (Ariophantidae); Amphidromus, and Trachia (Camaenidae); Paralaoma (Punctidae); Curvella (Subulinidae). All descriptions are based on the morphology of the shells. We distinguish the following 48 new species: Acmella cyrtoglyphe, Acmella umbilicata, Acmella ovoidea, Acmella nana, Acmella subcancellata, Acmella striata, and Anaglyphula sauroderma (Assimineidae); Ditropopsis davisoni, Ditropopsis trachychilus, Ditropopsis constricta, Ditropopsis tyloacron, Ditropopsis cincta, and Japonia anceps (Cyclophoridae); Diplommatina bidentata and Diplommatina tylocheilos (Diplommatinidae); Georissa leucococca and Georissa nephrostoma (Hydrocenidae); Durgella densestriata, Dyakia chlorosoma, Microcystina microrhynchus, Microcystina callifera, Microcystina striatula, Microcystina planiuscula, and Microcystina physotrochus (Ariophantidae); Amphidromus psephos and Trachia serpentinitica (Camaenidae); Philalanka tambunanensis, Philalanka obscura, Philalanka anomphala, Philalanka rugulosa, and Philalanka malimgunung (Endodontidae); Kaliella eurytrochus, Kaliella sublaxa, Kaliella phacomorpha, Kaliella punctata, Kaliella microsoma, Rahula delopleura, (Euconulidae); Paralaoma angusta (Punctidae); Curvella hadrotes (Subulinidae); Trochomorpha trachus, Trochomorpha haptoderma, Trochomorpha thelecoryphe, Geotrochus oedobasis, Geotrochus spilokeiria, Geotrochus scolops, Geotrochus kitteli, Geotrochus subscalaris, and Geotrochus meristorhachis (Trochomorphidae). PMID:26692803

  12. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  13. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  14. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  15. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  16. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  17. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1988-11-14

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas.

  18. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  19. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  20. Additive Manufacturing of Aerospace Propulsion Components

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  1. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  2. Multilevel Interventions: Measurement and Measures

    PubMed Central

    Charns, Martin P.; Alligood, Elaine C.; Benzer, Justin K.; Burgess, James F.; Mcintosh, Nathalie M.; Burness, Allison; Partin, Melissa R.; Clauser, Steven B.

    2012-01-01

    Background Multilevel intervention research holds the promise of more accurately representing real-life situations and, thus, with proper research design and measurement approaches, facilitating effective and efficient resolution of health-care system challenges. However, taking a multilevel approach to cancer care interventions creates both measurement challenges and opportunities. Methods One-thousand seventy two cancer care articles from 2005 to 2010 were reviewed to examine the state of measurement in the multilevel intervention cancer care literature. Ultimately, 234 multilevel articles, 40 involving cancer care interventions, were identified. Additionally, literature from health services, social psychology, and organizational behavior was reviewed to identify measures that might be useful in multilevel intervention research. Results The vast majority of measures used in multilevel cancer intervention studies were individual level measures. Group-, organization-, and community-level measures were rarely used. Discussion of the independence, validity, and reliability of measures was scant. Discussion Measurement issues may be especially complex when conducting multilevel intervention research. Measurement considerations that are associated with multilevel intervention research include those related to independence, reliability, validity, sample size, and power. Furthermore, multilevel intervention research requires identification of key constructs and measures by level and consideration of interactions within and across levels. Thus, multilevel intervention research benefits from thoughtful theory-driven planning and design, an interdisciplinary approach, and mixed methods measurement and analysis. PMID:22623598

  3. Including Conflict in Creative Writing.

    ERIC Educational Resources Information Center

    Litvin, Martin

    Conflict is the basis of all stories and thus should appear in some form in the first sentence. There are three kinds of conflict: people vs. people; people vs. nature; and people vs. themselves. Conflict must be repeated in all the various elements of the story's structure, including the plot, which is the plan of action telling what happens to…

  4. Family Living, Including Sex Education.

    ERIC Educational Resources Information Center

    Forlano, George

    This volume describes and evaluates 21 selected New York City Board of Education Umbrella Programs for the 1974-1975 school year. The programs include: (1) the parent resource center, (2) the teacher self-help program, (3) the East Harlem pre-kindergarten center, (4) the Brooklyn College volunteer tutoring program, (5) the parent education for…

  5. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  6. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  7. Using Mid-IR Cavity Ring-Down Spectrometry to Simultaneously Measure N2o, CO2, and CH4 Fluxes: Responses to Ammonium Nitrate Additions in Salt Marshes

    NASA Astrophysics Data System (ADS)

    Brannon, E.; Moseman-Valtierra, S.; Tang, J.; Chen, X.; Martin, R.; Garate, M.

    2014-12-01

    Greenhouse gas emissions from salt marshes, especially of nitrous oxide (N2O), are a central interest because anthropogenic nutrient loads may substantially alter net climatic forcing of these globally significant ecosystems. In a series of lab and field experiments, a new cavity ring down spectrometer (CRDS, Picarro G2508) that uses mid-infrared (mid-IR) frequencies to measure N2O was compared to a near-IR gas analyzer (LGR N2O/CO analyzer). The Picarro G2508 reports N2O as well as CO2 and CH4 concentrations roughly every second at the parts per billion level. Responses of N2O fluxes to experimental ammonium nitrate additions in marsh mesocosms and marsh plots in situ were compared among these analyzers, along with minimum detectable N2O fluxes. At fluxes above 150 μmol N2O m-2 d-1, the Picarro G2508 and LGR analyzers performed similarly in both mesocosm and field plots that had been enriched with ammonium nitrate, however there were significantly lower minimum detectable N2O fluxes (about 1 order of magnitude) for the LGR than for the Picarro. A gas chromatograph (Shimadzu GC 2014) was also used to test calibration of the G2508. These experiments suggest that mid-IR CRDS technology offers a new tool for simultaneous analyses of N2O along with CO2 and CH4, which fills an important need for quantifying the net climatic forcing of ecosystems. However based on relatively high minimum N2O detection levels of the CRDS, it may work best in highly eutrophic environments.

  8. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  9. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  10. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  11. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  12. Extension of the standard addition method by blank addition.

    PubMed

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set.

  13. Extension of the standard addition method by blank addition

    PubMed Central

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set. PMID:26844210

  14. Pi Division and Addition

    ERIC Educational Resources Information Center

    Scott, Paul

    2008-01-01

    The number Pi (approximately 3.14159) is defined to be the ratio C/d of the circumference (C) to the diameter (d) of any given circle. In particular, Pi measures the circumference of a circle of diameter d = 1. Historically, the Greek mathematician Archimedes found good approximations for Pi by inscribing and circumscribing many-sided polygons…

  15. Carbon additives for electrical double layer capacitor electrodes

    NASA Astrophysics Data System (ADS)

    Weingarth, D.; Cericola, D.; Mornaghini, F. C. F.; Hucke, T.; Kötz, R.

    2014-11-01

    Electrochemical double layer capacitors (EDLCs) are inherently high power devices when compared to rechargeable batteries. While capacitance and energy storage ability are mainly increased by optimizing the electrode active material or the electrolyte, the power capability could be improved by including conductive additives in the electrode formulations. This publication deals with the use of four different carbon additives - two carbon blacks and two graphites - in standard activated carbon based EDLC electrodes. The investigations include: (i) physical characterization of carbon powder mixtures such as surface area, press density, and electrical resistivity measurements, and (ii), electrochemical characterization via impedance spectroscopy and cyclic voltammetry of full cells made with electrodes containing 5 wt.% of carbon additive and compared to cells made with pure activated carbon electrodes in organic electrolyte. Improved cell performance was observed in both impedance and cyclic voltammetry responses. The results are discussed considering the main characteristics of the different carbon additives, and important considerations about electrode structure and processability are drawn.

  16. Does Preoperative Measurement of Cerebral Blood Flow with Acetazolamide Challenge in Addition to Preoperative Measurement of Cerebral Blood Flow at the Resting State Increase the Predictive Accuracy of Development of Cerebral Hyperperfusion after Carotid Endarterectomy? Results from 500 Cases with Brain Perfusion Single-photon Emission Computed Tomography Study

    PubMed Central

    OSHIDA, Sotaro; OGASAWARA, Kuniaki; SAURA, Hiroaki; YOSHIDA, Koji; FUJIWARA, Shunro; KOJIMA, Daigo; KOBAYASHI, Masakazu; YOSHIDA, Kenji; KUBO, Yoshitaka; OGAWA, Akira

    2015-01-01

    The purpose of the present study was to determine whether preoperative measurement of cerebral blood flow (CBF) with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of development of cerebral hyperperfusion after carotid endarterectomy (CEA). CBF at the resting state and cerebrovascular reactivity (CVR) to acetazolamide were quantitatively assessed using N-isopropyl-p-[123I]-iodoamphetamine (IMP)-autoradiography method with single-photon emission computed tomography (SPECT) before CEA in 500 patients with ipsilateral internal carotid artery stenosis (≥ 70%). CBF measurement using 123I-IMP SPECT was also performed immediately and 3 days after CEA. A region of interest (ROI) was automatically placed in the middle cerebral artery territory in the affected cerebral hemisphere using a three-dimensional stereotactic ROI template. Preoperative decreases in CBF at the resting state [95% confidence intervals (CIs), 0.855 to 0.967; P = 0.0023] and preoperative decreases in CVR to acetazolamide (95% CIs, 0.844 to 0.912; P < 0.0001) were significant independent predictors of post-CEA hyperperfusion. The area under the receiver operating characteristic curve for prediction of the development of post-CEA hyperperfusion was significantly greater for CVR to acetazolamide than for CBF at the resting state (difference between areas, 0.173; P < 0.0001). Sensitivity, specificity, and positive- and negative-predictive values for the prediction of the development of post-CEA hyperperfusion were significantly greater for CVR to acetazolamide than for CBF at the resting state (P < 0.05, respectively). The present study demonstrated that preoperative measurement of CBF with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of the development of post-CEA hyperperfusion. PMID:25746308

  17. Neoclassical Transport Including Collisional Nonlinearity

    SciTech Connect

    Candy, J.; Belli, E. A.

    2011-06-10

    In the standard {delta}f theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction {delta}f is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlueter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  18. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  19. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  20. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1990-07-01

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to sue chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. (VC)

  1. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1990-11-01

    The objective of this research is to elucidate the role of additives on the ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow them to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. 49 refs., 6 figs., 3 tabs.

  2. Including Magnetostriction in Micromagnetic Models

    NASA Astrophysics Data System (ADS)

    Conbhuí, Pádraig Ó.; Williams, Wyn; Fabian, Karl; Nagy, Lesleis

    2016-04-01

    The magnetic anomalies that identify crustal spreading are predominantly recorded by basalts formed at the mid-ocean ridges, whose magnetic signals are dominated by iron-titanium-oxides (Fe3-xTixO4), so called "titanomagnetites", of which the Fe2.4Ti0.6O4 (TM60) phase is the most common. With sufficient quantities of titanium present, these minerals exhibit strong magnetostriction. To date, models of these grains in the pseudo-single domain (PSD) range have failed to accurately account for this effect. In particular, a popular analytic treatment provided by Kittel (1949) for describing the magnetostrictive energy as an effective increase of the anisotropy constant can produce unphysical strains for non-uniform magnetizations. I will present a rigorous approach based on work by Brown (1966) and by Kroner (1958) for including magnetostriction in micromagnetic codes which is suitable for modelling hysteresis loops and finding remanent states in the PSD regime. Preliminary results suggest the more rigorously defined micromagnetic models exhibit higher coercivities and extended single domain ranges when compared to more simplistic approaches.

  3. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  4. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  5. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  6. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  7. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  8. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  9. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  10. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  11. Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

    SciTech Connect

    Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

    2015-12-08

    An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

  12. Septic tank additive impacts on microbial populations.

    PubMed

    Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

    2008-01-01

    Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

  13. Should Relational Aggression Be Included in DSM-V?

    ERIC Educational Resources Information Center

    Keenan, Kate; Coyne, Claire; Lahey, Benjamin B.

    2008-01-01

    The study examines whether relational aggression should be included in DSM-V disruptive behavior disorders. The results conclude that some additional information is gathered from assessing relational aggression but not enough to be included in DSM-V.

  14. Long-term variability of aerosol optical thickness in Eastern Europe over 2001-2014 according to the measurements at the Moscow MSU MO AERONET site with additional cloud and NO2 correction

    NASA Astrophysics Data System (ADS)

    Chubarova, N. Y.; Poliukhov, A. A.; Gorlova, I. D.

    2015-07-01

    The aerosol properties of the atmosphere were obtained within the framework of the AERONET program at the Moscow State University Meteorological Observatory (Moscow MSU MO) over 2001-2014 period. The quality data control has revealed the necessity of their additional cloud and NO2 correction. The application of cloud correction according to hourly visual cloud observations provides a decrease in average aerosol optical thickness (AOT) at 500 nm of up to 0.03 compared with the standard dataset. We also show that the additional NO2 correction of the AERONET data is needed in large megalopolis, like Moscow, with 12 million residents and the NOx emission rates of about 100 kt yr-1. According to the developed method we estimated monthly mean NO2 content, which provides an additional decrease of 0.01 for AOT at 340 nm, and of about 0.015 - for AOT at 380 and 440 nm. The ratios of NO2 optical thickness to AOT at 380 and 440 nm are about 5-6 % in summer and reach 15-20 % in winter when both factors have similar effects on UV irradiance. Seasonal cycle of AOT at 500 nm is characterized by a noticeable summer and spring maxima, and minimum in winter conditions, changing from 0.08 in December and January up to 0.3 in August. The application of the additional cloud correction removes a local AOT maximum in February, and lowered the December artificial high AOT values. The pronounced negative AOT trends of about -1-5 % yr-1 have been obtained for most months, which could be attributed to the negative trends in emissions (E) of different aerosol precursors of about 116 Gg yr-2 in ESOx, 78 Gg yr-2 in ENMVOC, and 272 Gg yr-2 in ECO over European territory of Russia. No influence of natural factors on temporal AOT variations has been revealed.

  15. Additional calculations of triton moments

    NASA Astrophysics Data System (ADS)

    Lally, D. F.; Levinger, J. S.

    1982-02-01

    The formalism of hyperspherical harmonics is used to calculate several moments of the triton photoeffect for a Volkov potential with Serber exchange. The accuracy of Clare's calculations of moments σ0 and σ1 is improved by including more terms in the hyperspherical harmonic expansion of the potential and of the ground state wave function. The moment σ2=8.9×104 MeV3 mb is calculated using one term in the hyperspherical harmonic expansions of the potential and wave function. We invert four moments and find reasonable agreement with Gorbunov's measurements of the 3He photoeffect. NUCLEAR REACTIONS Triton photoeffect, hyperspherical harmonics, moments of photoeffect, inversion of moments.

  16. A Quasi-Experimental Study of Two Selected Units of the Industrial Arts Curriculum Project Materials to Determine the Measurable Additive Effects of a Unit on Design in Manfacturing Technology upon a Similar Unit on Design in Construction Technology.

    ERIC Educational Resources Information Center

    Kuwik, Paul David

    The purpose of the study was to determine whether exposing junior high school students to a unit on design in construction technology and to a unit on design in manufacturing technology significantly affects their achievement on a test measuring "Technological Principles of Design" when compared to a group of junior high school students exposed…

  17. Numerical Simulation of Liquid Jet Atomization Including Turbulence Effects

    NASA Technical Reports Server (NTRS)

    Trinh, Huu P.; Chen, C. P.; Balasubramanyam, M. S.

    2005-01-01

    This paper describes numerical implementation of a newly developed hybrid model, T-blob/T-TAB, into an existing computational fluid dynamics (CFD) program for primary and secondary breakup simulation of liquid jet atomization. This model extend two widely used models, the Kelvin-Helmholtz (KH) instability of Reitz (blob model) and the Taylor-Analogy-Breakup (TAB) secondary droplet breakup by O'Rourke and Amsden to include turbulence effects. In the primary breakup model, the level of the turbulence effect on the liquid breakup depends on the characteristic scales and the initial flow conditions. For the secondary breakup, an additional turbulence force acted on parent drops is modeled and integrated into the TAB governing equation. Several assessment studies are presented and the results indicate that the existing KH and TAB models tend to under-predict the product drop size and spray angle, while the current model provides superior results when compared with the measured data.

  18. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  19. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in...

  20. 19 CFR 134.2 - Additional duties.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... this part shall be subject to additional duties of 10 percent of the final appraised value unless... container) to indicate the English name of the country of origin of the article or to include words...

  1. Ideas: Measurement.

    ERIC Educational Resources Information Center

    Sovchik, Robert; Meconi, L. J.

    1994-01-01

    Presents measurement activities for K-3, 4-6, 5-6, and 7-8 grade levels. Activities include a measurement scavenger hunt, using a clinometer to measure angles of elevation, estimating the age of trees, measuring the height of a tree, and measuring objects at a distance. Includes reproducible worksheets. (MDH)

  2. [Ni(OH)3W6O18(OCH2)3CCH2OH]4–: the first tris-functionalized Anderson-type heteropolytungstate† †Electronic supplementary information (ESI) available: Experimental procedures, synthesis details, characterization data, including IR, ESI-MS, TGA, elemental analysis and X-ray crystallography with CIF file. CCDC 1477611. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c6cc04326g Click here for additional data file. Click here for additional data file.

    PubMed Central

    Gumerova, Nadiia I.; Roller, Alexander

    2016-01-01

    Na2[TMA]2[Ni(OH)3W6O18(OCH2)3CCH2OH]·9H2O represents the first covalent tris-functionalized Anderson-type heteropolytungstate and was characterized by single-crystal X-ray diffraction, electrospray ionization mass spectrometry, TGA and IR spectroscopy. Zeta potential measurements in solutions containing human serum albumin were performed to investigate electrostatic interactions with [Ni(OH)3W6O18(OCH2)3CCH2OH]4–. PMID:27355393

  3. 78 FR 22209 - Additional Synthetic Drug Testing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... COMMISSION 10 CFR Part 26 Additional Synthetic Drug Testing AGENCY: Nuclear Regulatory Commission. ACTION... NRC amend its Fitness for Duty program regulations to amend drug testing requirements to test for additional synthetic drugs currently not included in the regulations. The NRC determined that the...

  4. Asthma and anaphylactoid reactions to food additives.

    PubMed Central

    Tarlo, S. M.; Sussman, G. L.

    1993-01-01

    Presumed allergic reactions to hidden food additives are both controversial and important. Clinical manifestations include asthma, urticaria, angioedema, and anaphylactic-anaphylactoid events. Most adverse reactions are caused by just a few additives, such as sulfites and monosodium glutamate. Diagnosis is suspected from the history and confirmed by specific challenge. The treatment is specific avoidance. PMID:8499792

  5. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate.

  6. Wood lens design philosophy based on a binary additive manufacturing technique

    NASA Astrophysics Data System (ADS)

    Marasco, Peter L.; Bailey, Christopher

    2016-04-01

    Using additive manufacturing techniques in optical engineering to construct a gradient index (GRIN) optic may overcome a number of limitations of GRIN technology. Such techniques are maturing quickly, yielding additional design degrees of freedom for the engineer. How best to employ these degrees of freedom is not completely clear at this time. This paper describes a preliminary design philosophy, including assumptions, pertaining to a particular printing technique for GRIN optics. It includes an analysis based on simulation and initial component measurement.

  7. Inlet Guide Vane Wakes Including Rotor Effects

    NASA Astrophysics Data System (ADS)

    Johnston, R. T.; Fleeter, S.

    2001-02-01

    Fundamental experiments are described directed at the investigation of forcing functions generated by an inlet guide vane (IGV) row, including interactions with the downstream rotor, for application to turbomachine forced response design systems. The experiments are performed in a high-speed research fan facility comprised of an IGV row upstream of a rotor. IGV-rotor axial spacing is variable, with the IGV row able to be indexed circumferentially, thereby allowing measurements to be made across several IGV wakes. With an IGV relative Mach number of 0.29, measurements include the IGV wake pressure and velocity fields for three IGV-rotor axial spacings. The decay characteristics of the IGV wakes are compared to the Majjigi and Gliebe empirical correlations. After Fourier decomposition, a vortical-potential gust splitting analysis is implemented to determine the vortical and potential harmonic wake gust forcing functions both upstream and downstream of the rotor. Higher harmonics of the vortical gust component of the IGV wakes are found to decay at a uniform rate due to viscous diffusion.

  8. Critical point anomalies include expansion shock waves

    SciTech Connect

    Nannan, N. R.; Guardone, A.; Colonna, P.

    2014-02-15

    From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

  9. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    NASA Astrophysics Data System (ADS)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ), time of incubation, wavelength of measurement, addition of salts, and addition of detergent. In these independent projects, students sometimes discover ways to improve the methodology for the assays, and these improvements are incorporated into the suggested procedures for the rest of the semester. The results of this project are written up as a short paper in a style appropriate for a rapid communication in a scientific journal. The papers go through a round of peer review and revision. Ion-Exchange Chromatography Once each group has decided on a project and discussed the details with the instructor, they prepare their own buffers and equilibrate the resins. DEAE-Sephacel and CM-Sepharose, both from Pharmacia/LKB (Piscataway, NJ) are supplied, about 20 mL of packed resin for each egg-white preparation. (These resins can be regenerated and reused many times.) Each group uses one egg white for the entire purification project. The egg white is filtered through one layer of cheesecloth and diluted 5-fold with the starting buffer. The first step is done batchwise because of the viscosity of the sample. The diluted egg white is mixed with the resin for approximately 15 min, then centrifuged at 1500 μ g for 15 min. The supernatant, containing those proteins not adsorbed to the resin, is decanted. Subsequent washing and elution can then be carried out batchwise or by transferring to a column [1.5 - 20 cm Econocolumns (BioRad)]. The options for recovery of the enzyme from the CM resin include a batch or column method, elution by change in pH or ionic strength, and gradient or stepwise elution. Those carrying out elutions from a column use an automatic fraction collector; gradient formers are available for those who choose to elute with a linear salt gradient. When elution is carried out by a change in pH, it should be noted that lysozyme may precipitate near its isoelectric point, especially at low ionic strength. SDS - polyacrylamide gel electrophoresis is used to monitor

  10. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  11. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  12. Characterization of Metal Powders Used for Additive Manufacturing.

    PubMed

    Slotwinski, J A; Garboczi, E J; Stutzman, P E; Ferraris, C F; Watson, S S; Peltz, M A

    2014-01-01

    Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.

  13. Characterization of Metal Powders Used for Additive Manufacturing

    PubMed Central

    Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

    2014-01-01

    Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

  14. Effect of additives on protein aggregation.

    PubMed

    Hamada, Hiroyuki; Arakawa, Tsutomu; Shiraki, Kentaro

    2009-06-01

    This paper overviews solution additives that affect protein stability and aggregation during refolding, heating, and freezing processes. Solution additives are mainly grouped into two classes, i.e., protein denaturants and stabilizers. The former includes guanidine, urea, strong ionic detergents, and certain chaotropic salts; the latter includes certain amino acids, sugars, polyhydric alcohols, osmolytes, and kosmotropic salts. However, there are solution additives that are not unambiguously placed into these two classes, including arginine, certain divalent cation salts (e.g., MgCl(2)) and certain polyhydric alcohols (e.g., ethylene glycol). Certain non-ionic or non-detergent surfactants, ionic liquids, amino acid derivatives, polyamines, and certain amphiphilic polymers may belong to this class. They have marginal effects on protein structure and stability, but are able to disrupt protein interactions. Information on additives that do not catalyze chemical reactions nor affect protein functions helps us to design protein solutions for increased stability or reduced aggregation. PMID:19519415

  15. Models of bovine babesiosis including juvenile cattle.

    PubMed

    Saad-Roy, C M; Shuai, Zhisheng; van den Driessche, P

    2015-03-01

    Bovine Babesiosis in cattle is caused by the transmission of protozoa of Babesia spp. by ticks as vectors. Juvenile cattle (<9 months of age) have resistance to Bovine Babesiosis, rarely show symptoms, and acquire immunity upon recovery. Susceptibility to the disease varies between breeds of cattle. Models of the dynamics of Bovine Babesiosis transmitted by the cattle tick that include these factors are formulated as systems of ordinary differential equations. Basic reproduction numbers are calculated, and it is proved that if these numbers are below the threshold value of one, then Bovine Babesiosis dies out. However, above the threshold number of one, the disease may approach an endemic state. In this case, control measures are suggested by determining target reproduction numbers. The percentage of a particular population (for example, the adult bovine population) needed to be controlled to eradicate the disease is evaluated numerically using Columbia data from the literature. PMID:25715822

  16. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1989-02-04

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used will include S, P, Ag, Cu, Mn, and Na. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation over Rh catalysts. Ethylene hydroformylation has often served as a probe to determine CO insertion capabilities of Rh catalysts. The mechanism of CO insertion in ethylene hydroformylation over Rh/SiO{sub 2} was investigated.

  17. Analysis of Smart Composite Structures Including Debonding

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1997-01-01

    Smart composite structures with distributed sensors and actuators have the capability to actively respond to a changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept due to the static and dynamic control capabilities. Essential to the implementation of these smart composites are the development of accurate and efficient modeling techniques and experimental validation. This research addresses each of these important topics. A refined higher order theory is developed to model composite structures with surface bonded or embedded piezoelectric transducers. These transducers are used as both sensors and actuators for closed loop control. The theory accurately captures the transverse shear deformation through the thickness of the smart composite laminate while satisfying stress free boundary conditions on the free surfaces. The theory is extended to include the effect of debonding at the actuator-laminate interface. The developed analytical model is implemented using the finite element method utilizing an induced strain approach for computational efficiency. This allows general laminate geometries and boundary conditions to be analyzed. The state space control equations are developed to allow flexibility in the design of the control system. Circuit concepts are also discussed. Static and dynamic results of smart composite structures, obtained using the higher order theory, are correlated with available analytical data. Comparisons, including debonded laminates, are also made with a general purpose finite element code and available experimental data. Overall, very good agreement is observed. Convergence of the finite element implementation of the higher order theory is shown with exact solutions. Additional results demonstrate the utility of the developed theory to study piezoelectric actuation of composite

  18. Additional historical solid rocket motor burns

    NASA Astrophysics Data System (ADS)

    Wiedemann, Carsten; Homeister, Maren; Oswald, Michael; Stabroth, Sebastian; Klinkrad, Heiner; Vörsmann, Peter

    2009-06-01

    The use of orbital solid rocket motors (SRM) is responsible for the release of a high number of slag and Al 2O 3 dust particles which contribute to the space debris environment. This contribution has been modeled for the ESA space debris model MASTER (Meteoroid and Space Debris Terrestrial Environment Reference). The current model version, MASTER-2005, is based on the simulation of 1076 orbital SRM firings which mainly contributed to the long-term debris environment. SRM firings on very low earth orbits which produce only short living particles are not considered. A comparison of the modeled flux with impact data from returned surfaces shows that the shape and quantity of the modeled SRM dust distribution matches that of recent Hubble Space Telescope (HST) solar array measurements very well. However, the absolute flux level for dust is under-predicted for some of the analyzed Long Duration Exposure Facility (LDEF) surfaces. This indicates that some past SRM firings are not included in the current event database. Thus it is necessary to investigate, if additional historical SRM burns, like the retro-burn of low orbiting re-entry capsules, may be responsible for these dust impacts. The most suitable candidates for these firings are the large number of SRM retro-burns of return capsules. This paper focuses on the SRM retro-burns of Russian photoreconnaissance satellites, which were used in high numbers during the time of the LDEF mission. It is discussed which types of satellites and motors may have been responsible for this historical contribution. Altogether, 870 additional SRM retro-burns have been identified. An important task is the identification of such missions to complete the current event data base. Different types of motors have been used to de-orbit both large satellites and small film return capsules. The results of simulation runs are presented.

  19. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  20. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  1. Motor Energy Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple motor inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: High Efficiency Motor retrofit and Cogged V-belts retrofit. This tool calculates energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  2. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  3. Lubricating oil compositions containing organometallic additives

    SciTech Connect

    Landry, J.F.; Croudance, M.C.; On, H.P.; Shen, S.Y.

    1987-04-07

    This invention provides novel lubricating oil compositions comprising an organometallic additive, including a metal selected from Groups I, Ib, and VIII of the Periodic System of Elements, e.g. Na, K, Cu, Co, Ni or Fe, chelated with the reaction product of formaldehyde, an amino acid and a phenol, dissolved in a lubricating oil. Depending on the choice of the metal, the above organometallic additive imparts rust inhibition, sludge dispersant, wear reduction and anti-oxidant properties to the lubricating oil compositions.

  4. Efficient Improvement of Silage Additives by Using Genetic Algorithms

    PubMed Central

    Davies, Zoe S.; Gilbert, Richard J.; Merry, Roger J.; Kell, Douglas B.; Theodorou, Michael K.; Griffith, Gareth W.

    2000-01-01

    The enormous variety of substances which may be added to forage in order to manipulate and improve the ensilage process presents an empirical, combinatorial optimization problem of great complexity. To investigate the utility of genetic algorithms for designing effective silage additive combinations, a series of small-scale proof of principle silage experiments were performed with fresh ryegrass. Having established that significant biochemical changes occur over an ensilage period as short as 2 days, we performed a series of experiments in which we used 50 silage additive combinations (prepared by using eight bacterial and other additives, each of which was added at six different levels, including zero [i.e., no additive]). The decrease in pH, the increase in lactate concentration, and the free amino acid concentration were measured after 2 days and used to calculate a “fitness” value that indicated the quality of the silage (compared to a control silage made without additives). This analysis also included a “cost” element to account for different total additive levels. In the initial experiment additive levels were selected randomly, but subsequently a genetic algorithm program was used to suggest new additive combinations based on the fitness values determined in the preceding experiments. The result was very efficient selection for silages in which large decreases in pH and high levels of lactate occurred along with low levels of free amino acids. During the series of five experiments, each of which comprised 50 treatments, there was a steady increase in the amount of lactate that accumulated; the best treatment combination was that used in the last experiment, which produced 4.6 times more lactate than the untreated silage. The additive combinations that were found to yield the highest fitness values in the final (fifth) experiment were assessed to determine a range of biochemical and microbiological quality parameters during full-term silage

  5. Environmental Sustainability - Including Land and Water Use

    EPA Science Inventory

    Assessments of environmental sustainability can be conducted in many ways with one of the most quantitative methods including Life Cycle Impact Assessment (LCIA). While historically LCIA has included a comprehensive list of impact categories including: ozone depletion, global c...

  6. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  7. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  8. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  9. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  10. Additive empirical force field for hexopyranose monosaccharides

    PubMed Central

    Guvench, Olgun; Greene, Shannon N.; Kamath, Ganesh; Brady, John W.; Venable, Richard M.; Pastor, Richard W.; MacKerell, Alexander D.

    2010-01-01

    We present an all-atom additive empirical force field for the hexopyranose monosaccharide form of glucose and its diastereomers allose, altrose, galactose, gulose, idose, mannose, and talose. The model is developed to be consistent with the CHARMM all-atom biomolecular force fields, and the same parameters are used for all diastereomers, including both the α- and β-anomers of each monosaccharide. The force field is developed in a hierarchical manner and reproduces the gas-phase and condensed-phase properties of small-molecule model compounds corresponding to fragments of pyranose monosaccharides. The resultant parameters are transferred to the full pyranose monosaccharides and additional parameter development is done to achieve a complete hexopyranose monosaccharide force field. Parametrization target data include vibrational frequencies, crystal geometries, solute – water interaction energies, molecular volumes, heats of vaporization, and conformational energies, including those for over 1800 monosaccharide conformations at the MP2/cc-pVTZ//MP2/6-31G(d) level of theory. Though not targeted during parametrization, free energies of aqueous solvation for the model compounds compare favorably with experimental values. Also well-reproduced are monosaccharide crystal unit cell dimensions and ring pucker, densities of concentrated aqueous glucose systems, and the thermodynamic and dynamic properties of the exocyclic torsion in dilute aqueous systems. The new parameter set expands the CHARMM additive force field to allow for simulation of heterogeneous systems that include hexopyranose monosaccharides in addition to proteins, nucleic acids, and lipids. PMID:18470966

  11. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Kennedy. (b) The inclusion of artifacts in the scope of the term assassination record is understood to... regulation. (c) Whenever artifacts are included in the JFK Assassination Records Collection, it shall be... materials depicting the artifacts. Additional display of or examination by the public of artifacts in...

  12. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  13. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  14. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  15. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  16. English as an Additional Language: Changing Perspectives.

    ERIC Educational Resources Information Center

    Leung, Constant, Ed.; Cable, Carrie, Ed.

    This volume highlights the language and learning needs of pupils with English as an additional language in the United Kingdom. It includes chapters by British teachers and researchers working in this field. The book addresses a number of issues of interest to practitioners, scholars, teacher educators, and policy makers. Each chapter is prefaced…

  17. PLUTINO DETECTION BIASES, INCLUDING THE KOZAI RESONANCE

    SciTech Connect

    Lawler, S. M.; Gladman, B.

    2013-07-01

    Because of their relative proximity within the trans-Neptunian region, the plutinos (objects in the 3:2 mean-motion resonance with Neptune) are numerous in flux-limited catalogs, and well-studied theoretically. We perform detailed modeling of the on-sky detection biases for plutinos, with special attention to those that are simultaneously in the Kozai resonance. In addition to the normal 3:2 resonant argument libration, Kozai plutinos also show periodic oscillations in eccentricity and inclination, coupled to the argument of perihelion ({omega}) oscillation. Due to the mean-motion resonance, plutinos avoid coming to pericenter near Neptune's current position in the ecliptic plane. Because Kozai plutinos are restricted to certain values of {omega}, perihelion always occurs out of the ecliptic plane, biasing ecliptic surveys against finding these objects. The observed Kozai plutino fraction f{sub koz}{sup obs} has been measured by several surveys, finding values between 8% and 25%, while the true Kozai plutino fraction f{sub koz}{sup true} has been predicted to be between 10% and 30% by different giant planet migration simulations. We show that f{sub koz}{sup obs} varies widely depending on the ecliptic latitude and longitude of the survey, so debiasing to find the true ratio is complex. Even a survey that covers most or all of the sky will detect an apparent Kozai fraction that is different from f{sub koz}{sup true}. We present a map of the on-sky plutino Kozai fraction that would be detected by all-sky flux-limited surveys. This will be especially important for the Panoramic Survey Telescope and Rapid Response System and Large Synoptic Survey Telescope projects, which may detect large numbers of plutinos as they sweep the sky. f{sub koz}{sup true} and the distribution of the orbital elements of Kozai plutinos may be a diagnostic of giant planet migration; future migration simulations should provide details on their resonant Kozai populations.

  18. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  19. Additive interaction in survival analysis: use of the additive hazards model.

    PubMed

    Rod, Naja Hulvej; Lange, Theis; Andersen, Ingelise; Marott, Jacob Louis; Diderichsen, Finn

    2012-09-01

    It is a widely held belief in public health and clinical decision-making that interventions or preventive strategies should be aimed at patients or population subgroups where most cases could potentially be prevented. To identify such subgroups, deviation from additivity of absolute effects is the relevant measure of interest. Multiplicative survival models, such as the Cox proportional hazards model, are often used to estimate the association between exposure and risk of disease in prospective studies. In Cox models, deviations from additivity have usually been assessed by surrogate measures of additive interaction derived from multiplicative models-an approach that is both counter-intuitive and sometimes invalid. This paper presents a straightforward and intuitive way of assessing deviation from additivity of effects in survival analysis by use of the additive hazards model. The model directly estimates the absolute size of the deviation from additivity and provides confidence intervals. In addition, the model can accommodate both continuous and categorical exposures and models both exposures and potential confounders on the same underlying scale. To illustrate the approach, we present an empirical example of interaction between education and smoking on risk of lung cancer. We argue that deviations from additivity of effects are important for public health interventions and clinical decision-making, and such estimations should be encouraged in prospective studies on health. A detailed implementation guide of the additive hazards model is provided in the appendix.

  20. Teebi hypertelorism syndrome: additional cases.

    PubMed

    Machado-Paula, Ligiane Alves; Guion-Almeida, Maria Leine

    2003-03-01

    We report on two unrelated Brazilian boys who have craniofacial and digital anomalies resembling those reported with Teebi hypertelorism syndrome. Additional features such as cleft lip and palate, large uvula, atypical chin and abnormal scapulae were observed.

  1. Evaluation of certain food additives and contaminants.

    PubMed

    2002-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (diacetyltartaric and fatty acid esters of glycerol, quillaia extracts, invertase from Saccharomyces cerevisiae, beta-carotene from Blakeslea trispora, curcumin, phosphates, diphosphates and polyphosphates, hydrogenated poly-1-decene, natamycin, D-tagatose, carrageenan, processed Eucheuma seaweed, curdlan, acetylated oxidized starch, alpha-cyclodextrin and sodium sulfate), flavouring agents and contaminants (3-chloro-1,2-propanediol, 1,3-dichloro-2-propanol, and a large number of polychlorinated dibenzodioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired. PMID:12564044

  2. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  3. Evaluation of certain food additives and contaminants.

    PubMed

    2001-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives and contaminants (including flavouring agents), and the establishment and revision of specifications. A summary follows of the Committee's evaluations of toxicological data on various specific food additives (furfural, paprika oleoresin, caramel colour II, cochineal extract, carmines, aspartame-acesulfame salt, D-tagatose, benzoyl peroxide, nitrous oxide, stearyl tartrate and trehalose), flavouring agents and contaminants (cadmium and tin), and of intake data on calcium from calcium salts of food additives. Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired.

  4. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  5. 78 FR 77666 - Notice and Request for Public Comment on State Requests To Include Additional Proof-of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ... Instructions on the National Mail Voter Registration Form AGENCY: U.S. Election Assistance Commission (EAC..., and Georgia on the National Mail Voter Registration Form (``Federal Form''). Those States have... requirements that, as a precondition to registering to vote in Federal elections, voter registration...

  6. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... based on the weight of evidence showing that regulation under 40 CFR part 273 is appropriate for the... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Petitions to amend 40 CFR part 273 to... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  7. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... based on the weight of evidence showing that regulation under 40 CFR part 273 is appropriate for the... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Petitions to amend 40 CFR part 273 to... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL...

  8. 78 FR 35929 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-14

    ... decision identifying water quality limited segments and associated pollutants in Indiana to be listed... pollution controls are not stringent enough to attain or maintain state water quality standards and for... certain water quality limited segments and associated pollutants (Table 1 in Appendix A1 of EPA's...

  9. 78 FR 56695 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-13

    ... EPA's proposed decision identifying water quality limited segments and associated pollutants in Indiana to be listed pursuant to the Clean Water Act Section 303(d)(2), and requests public comment. For... Under the Clean Water Act AGENCY: Environmental Protection Agency (EPA). ACTION: Reopening of...

  10. Uranium hydrogeochemical and stream sediment reconnasissance of the Trinidad NTMS Quadrangle, Colorado, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-05-01

    Uranium and other elemental data resulting from the Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) of the Trinidad National Topographic Map Series (NTMS) quadrangle, Colorado, by the Los Alamos Scientific Laboratory (LASL) are reported herein. This study was conducted as part of the United States Department of Energy's National Uranium Resource Evaluation (NURE), which is designed to provide improved estimates of the availability and economics of nuclear fuel resources and to make available to industry information for use in exploration and development of uranium resources. The HSSR data will ultimately be integrated with other NURE data (e.g., airborne radiometric surveys and geological investigations) to complete the entire NURE program. This report is a supplement to the HSSR uranium evaluation report for the Trinidad quadrange (Morris et al, 1978), which presented the field and uranium data for the 1060 water and 1240 sediment samples collected from 1768 locations in the quadrangle. The earlier report contains an evaluation of the uranium concentrations of the samples as well as descriptions of the geology, hydrology, climate, and uranium occurrences of the quadrange. This supplement presents the sediment field and uranium data again and the analyses of 42 other elements in the sediments. All uranium samples were redetermined by delayed-neutron counting (DNC) when the sediment samples were analyzed for 31 elements by neutron activation. For 99.6% of the sediment samples analyzed, the differences between the uranium contents first determined (Morris et al, 1978) and the analyses reported herein are less than 10%.

  11. Measurement of $\

    SciTech Connect

    Aguilar-Arevalo, A.A.; Anderson, C.E.; Bazarko, A.O.; Brice, S.J.; Brown, B.C.; Bugel, L.; Cao, J.; Coney, L.; Conrad, J.M.; Cox, D.C.; Curioni, A.; /Yale U. /Columbia U.

    2010-10-01

    MiniBooNE reports the first absolute cross sections for neutral current single {pi}{sup 0} production on CH{sub 2} induced by neutrino and antineutrino interactions measured from the largest sets of NC {pi}{sup 0} events collected to date. The principal result consists of differential cross sections measured as functions of {pi}{sup 0} momentum and {pi}{sup 0} angle averaged over the neutrino flux at MiniBooNE. We find total cross sections of (4.76 {+-} 0.05{sub stat} {+-} 0.76{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of E{sub {nu}} = 808 MeV and (1.48 {+-} 0.05{sub stat} {+-} 0.23{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of E{sub {nu}} = 664 MeV for {nu}{sub {mu}} and {bar {nu}}{sub {mu}} induced production, respectively. In addition, we have included measurements of the neutrino and antineutrino total cross sections for incoherent exclusive NC 1{pi}{sup 0} production corrected for the effects of final state interactions to compare to prior results.

  12. Measurement of \

    SciTech Connect

    Aguilar-Arevalo, A.A.; Anderson, C.E.; Bazarko, A.O.; Brice, S.J.; Brown, B.C.; Bugel, L.; Cao, J.; Coney, L.; Conrad, J.M.; Cox, D.C.; Curioni, A.; /Yale U. /Columbia U.

    2009-11-01

    MiniBooNE reports the first absolute cross sections for neutral current single {pi}{sup 0} production on CH{sub 2} induced by neutrino and antineutrino interactions measured from the largest sets of NC {pi}{sup 0} events collected to date. The principal result consists of differential cross sections measured as functions of {pi}{sup 0} momentum and {pi}{sup 0} angle averaged over the neutrino flux at MiniBooNE. We find total cross sections of (4.76 {+-} 0.05{sub stat} {+-} 0.40{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of = 808 MeV and (1.48 {+-} 0.05{sub stat} {+-} 0.14{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of = 664 MeV for {nu}{sub {mu}} and {bar {nu}}{sub {mu}} induced production, respectively. In addition, we have included measurements of the neutrino and antineutrino total cross sections for incoherent exclusive NC 1{pi}{sup 0} production corrected for the effects of final state interactions to compare to prior results.

  13. Article Including Environmental Barrier Coating System

    NASA Technical Reports Server (NTRS)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  14. Measuring Resilience.

    ERIC Educational Resources Information Center

    O'Neal, Marcia R.

    Locating and selecting an instrument that measures resilience is no simple task. This document provides information about several measures of resilience or hardiness that have been used in recent years. The discussion of each measure includes information about its origins, a description of the measure and its uses, and a discussion of the…

  15. A polymeric flame retardant additive for rubbers

    SciTech Connect

    Ghosh, S.N.; Maiti, S.

    1993-12-31

    Synthesis of a polyphosphonate by the interfacial polymerization of bisphenol-A (BPA) and dichloro-phenyl phosphine oxide (DCPO) using cetyltrimethyl ammonium chloride (TMAC) as phase transfer catalyst (PTC) was reported. The polyphosphonate was characterized by elemental analysis, IR, TGA, DSC and 1H-NMR spectroscopy. The flame retardancy of the polymer was done by OI study. The polymer was used as a fire retardant additive to rubbers such as natural rubber (NR), styrene-butadiene rubber(SBR), nitrile rubber (NBR) and chloroprene rubber (CR). The efficiency of the fire retardant property of this additive was determined by LOI measurements of the various rubber samples.

  16. The Modern U.S. High School Astronomy Course, Its Status and Makeup II: Additional Results

    ERIC Educational Resources Information Center

    Krumenaker, Larry

    2009-01-01

    A postal survey of high school astronomy teachers strongly confirms many results of an earlier electronic survey. Additional and new results include a measure of the level of inquiry (more structured inquiry and teacher-led) in the classroom as well as data showing that more emphasis is given to traditional topics than to contemporary astronomy…

  17. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  18. 10 CFR 905.11 - What must an IRP include?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... The customer must note this concurrence in the IRP. (5) Load forecasting. An IRP must include a statement that the customer conducted load forecasting. Load forecasting should include data that reflects... customer must make the load forecasting data available to Western upon request. (6) Measurement...

  19. 10 CFR 905.11 - What must an IRP include?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... The customer must note this concurrence in the IRP. (5) Load forecasting. An IRP must include a statement that the customer conducted load forecasting. Load forecasting should include data that reflects... customer must make the load forecasting data available to Western upon request. (6) Measurement...

  20. 10 CFR 905.11 - What must an IRP include?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... The customer must note this concurrence in the IRP. (5) Load forecasting. An IRP must include a statement that the customer conducted load forecasting. Load forecasting should include data that reflects... customer must make the load forecasting data available to Western upon request. (6) Measurement...

  1. 10 CFR 905.11 - What must an IRP include?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... The customer must note this concurrence in the IRP. (5) Load forecasting. An IRP must include a statement that the customer conducted load forecasting. Load forecasting should include data that reflects... customer must make the load forecasting data available to Western upon request. (6) Measurement...

  2. 10 CFR 905.11 - What must an IRP include?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... The customer must note this concurrence in the IRP. (5) Load forecasting. An IRP must include a statement that the customer conducted load forecasting. Load forecasting should include data that reflects... customer must make the load forecasting data available to Western upon request. (6) Measurement...

  3. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  4. Clinical effects of sulphite additives.

    PubMed

    Vally, H; Misso, N L A; Madan, V

    2009-11-01

    Sulphites are widely used as preservative and antioxidant additives in the food and pharmaceutical industries. Topical, oral or parenteral exposure to sulphites has been reported to induce a range of adverse clinical effects in sensitive individuals, ranging from dermatitis, urticaria, flushing, hypotension, abdominal pain and diarrhoea to life-threatening anaphylactic and asthmatic reactions. Exposure to the sulphites arises mainly from the consumption of foods and drinks that contain these additives; however, exposure may also occur through the use of pharmaceutical products, as well as in occupational settings. While contact sensitivity to sulphite additives in topical medications is increasingly being recognized, skin reactions also occur after ingestion of or parenteral exposure to sulphites. Most studies report a 3-10% prevalence of sulphite sensitivity among asthmatic subjects following ingestion of these additives. However, the severity of these reactions varies, and steroid-dependent asthmatics, those with marked airway hyperresponsiveness, and children with chronic asthma, appear to be at greater risk. In addition to episodic and acute symptoms, sulphites may also contribute to chronic skin and respiratory symptoms. To date, the mechanisms underlying sulphite sensitivity remain unclear, although a number of potential mechanisms have been proposed. Physicians should be aware of the range of clinical manifestations of sulphite sensitivity, as well as the potential sources of exposure. Minor modifications to diet or behaviour lead to excellent clinical outcomes for sulphite-sensitive individuals.

  5. Compact Radar Transceiver with Included Calibration

    NASA Technical Reports Server (NTRS)

    McLinden, Matthew; Rincon, Rafael

    2013-01-01

    The Digital Beamforming Synthetic Aperture Radar (DBSAR) is an eight-channel phased array radar system that employs solid-state radar transceivers, a microstrip patch antenna, and a reconfigurable waveform generator and processor unit. The original DBSAR transceiver design utilizes connectorized electronic components that tend to be physically large and heavy. To achieve increased functionality in a smaller volume, PCB (printed circuit board) transceivers were designed to replace the large connectorized transceivers. One of the most challenging problems designing the transceivers in a PCB format was achieving proper performance in the calibration path. For a radar loop-back calibration path, a portion of the transmit signal is coupled out of the antenna feed and fed back into the receiver. This is achieved using passive components for stability and repeatability. Some signal also leaks through the receive path. As these two signal paths are correlated via an unpredictable phase, the leakage through the receive path during transmit must be 30 dB below the calibration path. For DBSAR s design, this requirement called for a 100-dB isolation in the receiver path during transmit. A total of 16 solid-state L-band transceivers on a PCB format were designed. The transceivers include frequency conversion stages, T/R switching, and a calibration path capable of measuring the transmit power-receiver gain product during transmit for pulse-by-pulse calibration or matched filtering. In particular, this calibration path achieves 100-dB isolation between the transmitted signal and the low-noise amplifier through the use of a switching network and a section of physical walls achieving attenuation of radiated leakage. The transceivers were designed in microstrip PCBs with lumped elements and individually packaged components for compactness. Each transceiver was designed on a single PCB with a custom enclosure providing interior walls and compartments to isolate transceiver

  6. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    NASA Astrophysics Data System (ADS)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

  7. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  8. Postmarketing surveillance of food additives.

    PubMed

    Butchko, H H; Tschanz, C; Kotsonis, F N

    1994-08-01

    Postmarketing surveillance of consumption and of anecdotal reports of adverse health effects has been recognized by a number of regulatory authorities as a potentially useful method to provide further assurance of the safety of new food additives. Surveillance of consumption is used to estimate more reliably actual consumption levels relative to the acceptable daily intake of a food additive. Surveillance of anecdotal reports of adverse health effects is used to determine the presence of infrequent idiosyncratic responses that may not be predictable from premarket evaluations. The high-intensity sweetner, aspartame, is a food additive that has been the subject of extensive evaluation during the postmarketing period and is thus used as an example to discuss postmarketing surveillance.

  9. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  10. Composite Pressure Vessel Including Crack Arresting Barrier

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas K. (Inventor)

    2013-01-01

    A pressure vessel includes a ported fitting having an annular flange formed on an end thereof and a tank that envelopes the annular flange. A crack arresting barrier is bonded to and forming a lining of the tank within the outer surface thereof. The crack arresting barrier includes a cured resin having a post-curing ductility rating of at least approximately 60% through the cured resin, and further includes randomly-oriented fibers positioned in and throughout the cured resin.

  11. Evaluation of certain food additives and contaminants.

    PubMed

    2004-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (alpha-amylase from Bacillus lichenformis containing a genetically engineered alpha-amylase gene from B. licheniformis, annatto extracts, curcumin, diacetyl and fatty acid esters of glycerol, D-tagatose, laccase from Myceliophthora thermophila expressed in Aspergillus oryzae, mixed xylanase, beta-glucanase enzyme preparation produced by a strain of Humicola insolens, neotame, polyvinyl alcohol, quillaia extracts and xylanase from Thermomyces lanuginosus expressed in Fusarium venenatum), flavouring agents, a nutritional source of iron (ferrous glycinate, processed with citric acid), a disinfectant for drinking-water (sodium dichloroisocyanurate) and contaminants (cadmium and methylmercury). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives, recommendations on the flavouring agents considered, and tolerable intakes of the contaminants considered, changes in the status of specifications and further information requested or desired. PMID:15354533

  12. Evaluation of certain food additives and contaminants.

    PubMed

    2004-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (alpha-amylase from Bacillus lichenformis containing a genetically engineered alpha-amylase gene from B. licheniformis, annatto extracts, curcumin, diacetyl and fatty acid esters of glycerol, D-tagatose, laccase from Myceliophthora thermophila expressed in Aspergillus oryzae, mixed xylanase, beta-glucanase enzyme preparation produced by a strain of Humicola insolens, neotame, polyvinyl alcohol, quillaia extracts and xylanase from Thermomyces lanuginosus expressed in Fusarium venenatum), flavouring agents, a nutritional source of iron (ferrous glycinate, processed with citric acid), a disinfectant for drinking-water (sodium dichloroisocyanurate) and contaminants (cadmium and methylmercury). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives, recommendations on the flavouring agents considered, and tolerable intakes of the contaminants considered, changes in the status of specifications and further information requested or desired.

  13. Computational Process Modeling for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Bagg, Stacey; Zhang, Wei

    2014-01-01

    Computational Process and Material Modeling of Powder Bed additive manufacturing of IN 718. Optimize material build parameters with reduced time and cost through modeling. Increase understanding of build properties. Increase reliability of builds. Decrease time to adoption of process for critical hardware. Potential to decrease post-build heat treatments. Conduct single-track and coupon builds at various build parameters. Record build parameter information and QM Meltpool data. Refine Applied Optimization powder bed AM process model using data. Report thermal modeling results. Conduct metallography of build samples. Calibrate STK models using metallography findings. Run STK models using AO thermal profiles and report STK modeling results. Validate modeling with additional build. Photodiode Intensity measurements highly linear with power input. Melt Pool Intensity highly correlated to Melt Pool Size. Melt Pool size and intensity increase with power. Applied Optimization will use data to develop powder bed additive manufacturing process model.

  14. The grays of medical device color additives.

    PubMed

    Seidman, Brenda

    2014-01-01

    The United States' medical device color additive regulations are unknown to some, and confusing to many. This article reviews statutory language on color additives in the Federal Food, Drug, and Cosmetic Act (FFDCA), as amended, including the Delaney Clause on carcinogenicity; color additive regulatory language as it relates to medical devices in Title 21 of the Code of Federal Regulations (C.F.R.), Parts 70-82; reports on the Food and Drug Administration's (FDA's) likely current and historical practices in dealing with color additives in medical devices; and speculates on what may have given rise to decades of seemingly ad hoc color additives practices, which may now be difficult to reconstruct and satisfactorily modify. Also addressed is the Center for Devices and Radiological Health's (CDRH's) recent publicly-vetted approach to color additives in Section 7 of its April 2013 draft guidance, Use of International Standard ISO-10993, "Biological Evaluation of Medical Devices Part 1: Evaluation and Testing," which the author concludes is a change in the right direction, but which, at least in its current draft form, is not a fix to the CDRH's color additives dilemma. Lastly, the article suggests what the CDRH might consider in further developing a new approach to color additives. Such an approach would treat color additives as if they were any other potentially toxic group of chemicals, and could be fashioned in such a way that the CDRH could still satisfy the broad aspects of Congressional color additives mandates, and.yet be consistent with ISO 10993. In doing this, the CDRH would need to recommend a more directed use of its Quality System Regulation, 21 C.F.R. Part 820, for material and vendor qualification and validation in general; approach Congress for needed statutory changes; or make administrative changes. In order for any approach to be successful, whether it is a new twist on past practices, or an entirely new path forward, the FDA must, to the best of its

  15. Lubricating additive for drilling muds

    SciTech Connect

    Gutierrez, A.; Brois, S. J.; Brownawell, D. W.; Walker, T. O.

    1985-01-01

    Aqueous drilling fluids containing a minor amount of an additive composition featuring oxazolines of C/sub 1/-C/sub 30/ alkylthioglycolic acid. Such fluids are especially useful where reduced torque drilling fluids are needed. Another embodiment of this invention relates to a method of drilling utilizing the above-described fluids.

  16. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  17. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  18. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  19. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  20. Additional Financial Resources for Education.

    ERIC Educational Resources Information Center

    Hubbard, Ben C.

    This paper discusses the continuing need for additional educational funds and suggests that the only way to gain these funds is through concerted and persistent political efforts by supporters of education at both the federal and state levels. The author first points out that for many reasons declining enrollment may not decrease operating costs…

  1. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... below 470 MHz, including those licensed pursuant to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band... Spectrum Leasing Scope and Authority § 1.9005 Included services. Link to an amendment published at 79 FR 48533, August 15, 2014. The spectrum leasing policies and rules of this subpart apply to the...

  2. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  3. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  4. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  5. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record information maintained in the III System and the FIRS shall include serious and/or significant adult...

  6. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history records maintained in state criminal history record repositories, including those states participating in the NFF....

  7. Go! Including Movement during Routines and Transitions

    ERIC Educational Resources Information Center

    Orlowski, Marietta A.; Hart, Aaron

    2010-01-01

    Good schools for children ages 5 to 8 provide multiple opportunities for physical activity throughout the school day. Ideally, physical education, recess, extracurricular activities, and classroom activities together help ensure that children meet the recommended 60 minutes a day of structured activity and 60 of unstructured. Additionally, brief…

  8. New technology recipes include horseradish, vinegar, mushrooms

    SciTech Connect

    Bishop, J.

    1995-08-01

    Technology development for more effective environmental management continues to abound. This article contains some recent innovations in the following areas: wastewater treatment; site remediation; and air pollution control. In addition several emerging technologies address solid and hazardous waste management with techniques designed to reduce waste volume, recycle valuable materials and create new energy sources.

  9. System for improving measurement accuracy of transducer by measuring transducer temperature and resistance change using thermoelectric voltages

    NASA Technical Reports Server (NTRS)

    Anderson, Karl F. (Inventor); Parker, Allen R., Jr. (Inventor)

    1993-01-01

    A constant current loop measuring system measures a property including the temperature of a sensor responsive to an external condition being measured. The measuring system includes thermocouple conductors connected to the sensor, sensing first and second induced voltages responsive to the external condition. In addition, the measuring system includes a current generator and reverser generating a constant current, and supplying the constant current to the thermocouple conductors in forward and reverse directions generating first and second measured voltages, and a determining unit receiving the first and second measured voltages from the current generator and reverser, and determining the temperature of the sensor responsive to the first and second measured voltages.

  10. Does finger sense predict addition performance?

    PubMed

    Newman, Sharlene D

    2016-05-01

    The impact of fingers on numerical and mathematical cognition has received a great deal of attention recently. However, the precise role that fingers play in numerical cognition is unknown. The current study explores the relationship between finger sense, arithmetic and general cognitive ability. Seventy-six children between the ages of 5 and 12 participated in the study. The results of stepwise multiple regression analyses demonstrated that while general cognitive ability including language processing was a predictor of addition performance, finger sense was not. The impact of age on the relationship between finger sense, and addition was further examined. The participants were separated into two groups based on age. The results showed that finger gnosia score impacted addition performance in the older group but not the younger group. These results appear to support the hypothesis that fingers provide a scaffold for calculation and that if that scaffold is not properly built, it has continued differential consequences to mathematical cognition. PMID:26993292

  11. BE PROACTIVE: "Including Students With Challenging Behavior in Your Classroom"

    ERIC Educational Resources Information Center

    Mitchem, Katherine J.

    2005-01-01

    Many teachers feel unprepared to deal with disruptive behavior and believe this substantially interferes with their teaching and their ability to successfully include children with disabilities (Schumm & Vaughn, 1995). In addition to the stress of dealing with never-ending piles of paperwork, working with challenging students may be one of the…

  12. The Director's Toolbox for Including Children with Special Needs

    ERIC Educational Resources Information Center

    Barker, Linda; Goldberg, Roberta

    2012-01-01

    Directors of early childhood programs are the "frontline" for parents seeking admission for their children with identified special needs. In addition, developmental and behavioral issues that emerge after a child is enrolled in a program quickly come to the director's attention. Determining who can be included at a site, how to prepare the…

  13. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  14. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  15. The importance of including local correlation times in the calculation of inter-proton distances from NMR measurements: ignoring local correlation times leads to significant errors in the conformational analysis of the Glc alpha1-2Glc alpha linkage by NMR spectroscopy.

    PubMed

    Mackeen, Mukram; Almond, Andrew; Cumpstey, Ian; Enis, Seth C; Kupce, Eriks; Butters, Terry D; Fairbanks, Antony J; Dwek, Raymond A; Wormald, Mark R

    2006-06-01

    The experimental determination of oligosaccharide conformations has traditionally used cross-linkage 1H-1H NOE/ROEs. As relatively few NOEs are observed, to provide sufficient conformational constraints this method relies on: accurate quantification of NOE intensities (positive constraints); analysis of absent NOEs (negative constraints); and hence calculation of inter-proton distances using the two-spin approximation. We have compared the results obtained by using 1H 2D NOESY, ROESY and T-ROESY experiments at 500 and 700 MHz to determine the conformation of the terminal Glc alpha1-2Glc alpha linkage in a dodecasaccharide and a related tetrasaccharide. For the tetrasaccharide, the NOESY and ROESY spectra produced the same qualitative pattern of linkage cross-peaks but the quantitative pattern, the relative peak intensities, was different. For the dodecasaccharide, the NOESY and ROESY spectra at 500 MHz produced a different qualitative pattern of linkage cross-peaks, with fewer peaks in the NOESY spectrum. At 700 MHz, the NOESY and ROESY spectra of the dodecasaccharide produced the same qualitative pattern of peaks, but again the relative peak intensities were different. These differences are due to very significant differences in the local correlation times for different proton pairs across this glycosidic linkage. The local correlation time for each proton pair was measured using the ratio of the NOESY and T-ROESY cross-relaxation rates, leaving the NOESY and ROESY as independent data sets for calculating the inter-proton distances. The inter-proton distances calculated including the effects of differences in local correlation times give much more consistent results. PMID:16729133

  16. Additional Drive Circuitry for Piezoelectric Screw Motors

    NASA Technical Reports Server (NTRS)

    Smythe, Robert; Palmer, Dean; Gursel, Yekta; Reder, Leonard; Savedra, Raymond

    2004-01-01

    Modules of additional drive circuitry have been developed to enhance the functionality of a family of commercially available positioning motors (Picomotor . or equivalent) that provide linear motion controllable, in principle, to within increments .30 nm. A motor of this type includes a piezoelectric actuator that turns a screw. Unlike traditional piezoelectrically actuated mechanisms, a motor of this type does not rely on the piezoelectric transducer to hold position: the screw does not turn except when the drive signal is applied to the actuator.

  17. Additive-free digital microfluidics.

    PubMed

    Freire, Sergio L S; Tanner, Brendan

    2013-07-16

    Digital microfluidics, a technique for manipulation of droplets, is becoming increasingly important for the development of miniaturized platforms for laboratory processes. Despite the enthusiasm, droplet motion is frequently hindered by the desorption of proteins or other analytes to surfaces. Current approaches to minimize this unwanted surface fouling involve the addition of extra species to the droplet or its surroundings, which might be problematic depending on the droplet content. Here, a new strategy is introduced to move droplets containing cells and other analytes on solid substrates, without extra moieties; in particular, droplets with bovine serum albumin could be moved at a concentration 2000 times higher than previously reported (without additives). This capability is achieved by using a soot-based superamphiphobic surface combined with a new device geometry, which favors droplet rolling. Contrasting with electrowetting, wetting forces are not required for droplet motion.

  18. Optically measuring interior cavities

    DOEpatents

    Stone, Gary Franklin

    2008-12-21

    A method of measuring the three-dimensional volume or perimeter shape of an interior cavity includes the steps of collecting a first optical slice of data that represents a partial volume or perimeter shape of the interior cavity, collecting additional optical slices of data that represents a partial volume or perimeter shape of the interior cavity, and combining the first optical slice of data and the additional optical slices of data to calculate of the three-dimensional volume or perimeter shape of the interior cavity.

  19. Optically measuring interior cavities

    DOEpatents

    Stone, Gary Franklin

    2009-11-03

    A method of measuring the three-dimensional volume or perimeter shape of an interior cavity includes the steps of collecting a first optical slice of data that represents a partial volume or perimeter shape of the interior cavity, collecting additional optical slices of data that represents a partial volume or perimeter shape of the interior cavity, and combining the first optical slice of data and the additional optical slices of data to calculate of the three-dimensional volume or perimeter shape of the interior cavity.

  20. Additive concentrates for distillate fuels

    SciTech Connect

    Rossi, A.; Lewtas, K.

    1985-08-27

    An additive concentrate for incorporation into wax containing petroleum fuel oil compositions to improve low temperature flow properties comprising an oil solution containing: 3% to 90 wt. % of a C30-C300 oil-soluble nitrogen compound wax crystal growth inhibitor having at least one straight C8-C40 alkyl chain and partial esters, and at least one mole per mole of an organic acid capable of hydrogen bonding to improve the solubility in the oil.

  1. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  2. Include Passive Solar in Your Renovations.

    ERIC Educational Resources Information Center

    Bender, Gerald F.; Probasco, Jack F.

    1981-01-01

    A checklist covers potential energy saving modifications in a building scheduled for renovation, and includes suggestions for room utilization, landscaping, and building envelope, solar control, and active system modifications. (Author)

  3. Haemophilus influenzae Disease (Including Hib) Symptoms

    MedlinePlus

    ... is considered invasive. Symptoms of pneumonia usually include: Fever and chills Cough Shortness of breath or difficulty breathing Sweating ... the blood. It can cause symptoms such as: Fever and chills Excessive tiredness Pain in the belly Nausea with ...

  4. Lung Disease Including Asthma and Adult Vaccination

    MedlinePlus

    ... Healthcare Professionals Lung Disease including Asthma and Adult Vaccination Language: English Español (Spanish) Recommend on Facebook Tweet ... more about health insurance options. Learn about adult vaccination and other health conditions Asplenia Diabetes Heart Disease, ...

  5. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  6. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  7. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of...

  8. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  9. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  10. [Intolerance to food additives: an update].

    PubMed

    Cardinale, F; Mangini, F; Berardi, M; Sterpeta Loffredo, M; Chinellato, I; Dellino, A; Cristofori, F; Di Domenico, F; Mastrototaro, M F; Cappiello, A; Centoducati, T; Carella, F; Armenio, L

    2008-12-01

    Contrary to common believing, the prevalence of the intolerance to food additives in the general population is rather low. Nowadays many doubts persist with regard both to the pathogenetic mechanisms and to the clinical and diagnostic aspects in this field. Symptoms due to, or exacerbated from, food additives usually involve non-IgE-mediate mechanisms (pseudo-allergic reactions, PAR) and are usually less severe of those induced by food allergy. The most frequent clinical feature of the intolerance to food additives still remains the urticaria-angioedema syndrome, although these substances are really involved only in a minority of patients. Other possible clinical features include anaphylaxis, atopic eczema, behaviour disturbances, asthma and non-allergic rhinitis. The diagnostic approach consists in diary cards, reporting symptoms and food habits, elimination diet and double blinded placebo-controlled oral challenge with suspected additives. However, such procedure still remains poorly standardized and numerous uncertainties persist with regard to optimal conditions for performing and interpret the challenge results. The therapeutic approach consists in the exclusion of foods and products containing the additive involved, and, in patients not compliant to the diet, in treatment with symptomatic drugs.

  11. Additive manufacturing in production: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  12. Pronounced effects of additional resistance in Andreev reflection spectroscopy

    NASA Astrophysics Data System (ADS)

    Chen, T. Y.; Huang, S. X.; Chien, C. L.

    2010-06-01

    We present a systematic investigation of the additional resistance (RE) , which is an unavoidable consequence of pseudo-four-probe electrical measurements, on the point-contact Andreev reflection (PCAR) spectrum by both modeling and experiments. Instead of considering the total resistance between the two voltage leads across a point contact as a sum of a contact resistance (RC) and a fixed sample resistance (RS) , it is essential to treat the total resistance as a sum of the Andreev resistance RAR and the additional resistance RE , which are, respectively, the resistances affected and unaffected by the Andreev reflection process. We show a detailed formalism of taking RE into account in modeling and demonstrate that the PCAR spectrum can be drastically affected by the presence of RE . Experimentally, we have found that not only RE cannot be readily measured or even estimated, it is in fact different for each contact, depending on the contact resistance and whether the contact is near the purely ballistic regime or the purely diffusive regime. A self-consistent process is necessary to analyze the entire PCAR spectrum, properly normalize the conductance, determine RE , and other parameters including the spin polarization and the superconducting gap for each contact. We determine RE for various contacts on specimens with different resistivity and resolve the causes of RE . For contacts close to the diffusive regime, there are two sources of RE : a dominant contribution which is linearly proportional to the total resistance and a constant value from the sample resistance. We also address the effects of additional resistance when PCAR is administered in the ballistic limit and in the diffusive limit. With the proper treatment of the additional resistance, we demonstrate that PCAR can quantitatively extract essential information of spin polarization and superconducting gap.

  13. Chemical Mixture Risk Assessment Additivity-Based Approaches

    EPA Science Inventory

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  14. Analytical Jacobian Calculation in RT Model Including Polarization Effect

    NASA Astrophysics Data System (ADS)

    Okabayashi, Y.; Yoshida, Y.; Ota, Y.

    2014-12-01

    The greenhouse gas observing satellite "GOSAT" launched in January 2009 has been observing global distribution of CO2 and CH4. The TANSO-FTS mounted on GOSAT measures the two polarized components (called "P" and "S") of short wavelength infrared (SWIR) spectrum reflected from the earth's surface. In NIES, column-averaged dry air mole fraction of CO2 and CH4 (XCO2 and XCH4) are retrieved from SWIR spectra. However, the observed polarization information is not effectively utilized in the retrieval process due to the large computational cost of a vector RT model, instead the polarization synthesized spectra and a scalar RT model are used in the operational processing. An optical path length modification due to aerosol scattering is known as the major error source for XCO2 and XCH4 retrieval from SWIR spectra. Because the aerosol scattering changes polarization state of light, more accurate or additional aerosol information is expected by using the observed polarization spectra effectively in the retrieval process, which improves the retrieval accuracy of XCO2 and XCH4. In addition, for information content analysis, sensitivity analysis and error analysis, Jacobian matrix is important onto retrieval algorithm design before analyses for actual observed data. However, in the case of using RT model including polarization effect in retrieval process, the computational cost of Jacobian matrix calculations in maximum a posteriori retrieval is significantly large. Efficient calculation of analytical Jacobian is necessary. As a first step, we are implementing an analytical Jacobian calculation function to the vector RT model "Pstar". RT scheme of Pstar is based on hybrid method comprising the discrete ordinate and matrix operator methods. The reflection/transmission matrices and source vectors are obtained for each vertical layer through the discrete ordinate solution, and the vertically inhomogeneous system is constructed using the matrix operator method. Because the delta

  15. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  16. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  17. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  18. Nitrogen oxide abatement by distributed fuel addition

    SciTech Connect

    Wendt, J.O.L.; Meraab, J.

    1988-03-25

    The purpose of this project is to develop techniques for nitrogen oxides abatement by distributed fuel addition. The major nitrogen oxide of interest is Nitric Oxide (NO), a precursor to premature forest damage and to acid rain. Recently interest has also been evoked with respect to an additional oxide of nitrogen, namely Nitrous Oxide (N{sub 2}O). Therefore, abatement measures for NO{sub x} are being investigated to determine their influence on N{sub 2}O as well. This report briefly describes the significance of N{sub 2}O emissions to the environment and the urgent need to develop techniques that can reduce emissions of both NO and N{sub 2}O. Reburning through distributed fuel addition may be an effective technique for NO{sub x} (mainly NO) emission control as described in the previous quarterly report. Reburning may also be effective in reducing N{sub 2}O levels. A technique for N{sub 2}O measurement by gas chromatography/electron capture detection was developed during this quarter, and is described in this report. This analysis technique will be used in the proposed experimental study to investigate the effectiveness of reburning on N{sub 2}O control.

  19. Weather information network including graphical display

    NASA Technical Reports Server (NTRS)

    Leger, Daniel R. (Inventor); Burdon, David (Inventor); Son, Robert S. (Inventor); Martin, Kevin D. (Inventor); Harrison, John (Inventor); Hughes, Keith R. (Inventor)

    2006-01-01

    An apparatus for providing weather information onboard an aircraft includes a processor unit and a graphical user interface. The processor unit processes weather information after it is received onboard the aircraft from a ground-based source, and the graphical user interface provides a graphical presentation of the weather information to a user onboard the aircraft. Preferably, the graphical user interface includes one or more user-selectable options for graphically displaying at least one of convection information, turbulence information, icing information, weather satellite information, SIGMET information, significant weather prognosis information, and winds aloft information.

  20. Transmission line including support means with barriers

    DOEpatents

    Cookson, Alan H.

    1982-01-01

    A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

  1. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  2. Formative Assessment: Simply, No Additives

    ERIC Educational Resources Information Center

    Roskos, Kathleen; Neuman, Susan B.

    2012-01-01

    Among the types of assessment the closest to daily reading instruction is formative assessment. In contrast to summative assessment, which occurs after instruction, formative assessment involves forming judgments frequently in the flow of instruction. Key features of formative assessment include identifying gaps between where students are and…

  3. Additional Resources on Asian Americans.

    ERIC Educational Resources Information Center

    Kodama, Corinne Maekawa; Lee, Sunny; Liang, Christopher T. H.; Alvarez, Alvin N.; McEwen, Marylu K.

    2002-01-01

    The authors identify Asian American associations and organizations, academic journals, periodicals, and media resources. Selected annotated resources on Asian American activism and politics, counseling and psychology, educational issues, gender and sexual orientation, history, policy reports, and racial and ethnic identity are also included.…

  4. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  5. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  6. 34 CFR 300.20 - Include.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include. 300.20 Section 300.20 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH...

  7. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of... (part 27 of this chapter); (j) The Wireless Communications Service in the 698-746 MHz band (part 27...

  8. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of this subpart apply to...

  9. Nuclear Chemistry: Include It in Your Curriculum.

    ERIC Educational Resources Information Center

    Atwood, Charles H.; Sheline, R. K.

    1989-01-01

    Some of the topics that might be included in a nuclear chemistry section are explored. Offers radioactivity, closed shells in nuclei, energy of nuclear processes, nuclear reactions, and fission and fusion as topics of interest. Provided are ideas and examples for each. (MVL)

  10. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the Merchant Marine Act, 1936, as amended; (c) All vessels which have previously been constructed with... Merchant Marine Act of 1936, as amended, and later adjusted in price pursuant to section 9 of the Merchant... ADJUSTED UNDER THE MERCHANT SHIP SALES ACT 1946 § 289.2 Vessels included. Vessels subject to the...

  11. Multicultural Resources: Including Technology and the Internet

    ERIC Educational Resources Information Center

    Burton, Bryan

    2004-01-01

    In the fourteen years since the 1990 MENC pre-conference symposium on Multicultural Approaches to Music Education in Washington, D.C., music educators have come to recognize the need to include a variety of world musics in all music curricula, from elementary classrooms to advanced performing ensembles. Accordingly, a significant increase in the…

  12. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  13. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  14. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  15. 13 CFR 125.1 - Programs included.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 125.1 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION GOVERNMENT CONTRACTING PROGRAMS § 125.1 Programs included. The regulations in this part relate to the Government contracting assistance... businesses in obtaining a fair share of Federal Government contracts, subcontracts, and property sales....

  16. Including Children Dependent on Ventilators in School.

    ERIC Educational Resources Information Center

    Levine, Jack M.

    1996-01-01

    Guidelines for including ventilator-dependent children in school are offered, based on experience with six such students at a New York State school. Guidelines stress adherence to the medical management plan, the school-family partnership, roles of the social worker and psychologist, orientation, transportation, classroom issues, and steps toward…

  17. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM... function or dysfunction of the neuromuscular, musculoskeletal, cardiovascular and respiratory systems; and... body organ or external body member (including contiguous tissue) or replace all or part of the...

  18. Including Students with Visual Impairments: Softball

    ERIC Educational Resources Information Center

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  19. 17 CFR 240.12b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 240... Securities Exchange Act of 1934 General Requirements As to Contents § 240.12b-20 Additional information. In addition to the information expressly required to be included in a statement or report, there shall...

  20. 17 CFR 270.8b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 270.8b...) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270.8b-20 Additional information. In addition to the information expressly required to be included in a registration statement or report, there...

  1. The Application and Development of an Addition Goal Sketch

    ERIC Educational Resources Information Center

    Baroody, Arthur J.; Brach, Catherine; Tai, Yu-chi

    2006-01-01

    A schema based view of addition development is compared with Siegler's latest strategy-choice model, which includes an addition goal sketch (a basic understanding of "the goals and causal relations" of addition; Siegler & Crowley, 1994, p. 196). This metacognitive component in the latter model is presumed to develop as a child practices a basic…

  2. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  3. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  4. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  5. Plug Loads Conservation Measures

    2010-12-31

    This software requires inputs of simple plug loads inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: Vending Machine Misers, Delamp Vending Machine, Desktop to Laptop retrofit, CRT to LCD monitors retrofit, Computer Power Management Settings, and Energy Star Refrigerator retrofit. This tool calculates energy savings, demand reduction, cost savings, building life cycle costs including: simple payback, discounted payback, net-present value, and savings tomore » investment ratio. In addition this tool also displays the environmental benefits of a project.« less

  6. Plug Loads Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple plug loads inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: Vending Machine Misers, Delamp Vending Machine, Desktop to Laptop retrofit, CRT to LCD monitors retrofit, Computer Power Management Settings, and Energy Star Refrigerator retrofit. This tool calculates energy savings, demand reduction, cost savings, building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  7. Water Conservation Measures

    2010-12-31

    This software requires inputs of simple water fixture inventory information and calculates the water/energy and cost benefits of various retrofit opportunities. This tool includes water conservation measures for: Low-flow Toilets, Low-flow Urinals, Low-flow Faucets, and Low-flow Showheads. This tool calculates water savings, energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits ofmore » a project.« less

  8. Additionality of global benefits and financial additionality in the context of the AIJ negotiations

    SciTech Connect

    Puhl, I.

    1996-12-31

    The Conference of the Party at their first meeting (COP1) took a decision regarding criteria for joint implementation as indicated in Art. 4.2 (a) of the FCCC which established a pilot phase for activities implemented jointly (AIJ) under the pilot phase. Besides some more technical issues this decision specified that such measures should bring about real, measurable and long-term environmental benefits related to the mitigation of climate change that would not have occurred in the absence of such activities. It also established that the financing of AIJ shall be additional to the financial obligations of developed country parties. These two requirements are called the additionality criteria for AIJ. The first refers to the realness of GHG emission abatement (which means reduction compared to a baseline) whereas the second describes that funds earmarked for AIJ have no other objective (i.e. profit making, export promotion) but to reduce GHG emissions to avoid the free-riding of investors and subsequently developed country parties. The reporting framework as well as the reporting requirements under national programs do not specify further the two types of additionality and even though research focuses on issues like baseline determination there has been no attempt so far to identify approaches which contribute towards defining strict and practicable methods and guidelines to frame additionality criteria. The first FCCC assessment of pilot project reporting revealed that in the reporting of activities, emissions additionality often remained unclear, especially in cases where AIJ was only a portion of an existing or already planned project, and that there is a point about how to account for financial additionality. It subsequently proposed to develop a uniform approach to baseline determination and the assessment of emission (reduction) additionality and financial additionality.

  9. [Biophysical Characterization of Biopharmaceuticals, Including Antibody Drugs].

    PubMed

    Uchiyama, Susumu

    2016-01-01

    Biopharmaceuticals, including antibody drugs, are now popular because of their high specificity with low adverse effects, especially in the treatment of cancer and autoimmune diseases. However, because the active pharmaceutical ingredients of biopharmaceuticals are proteins, biophysical characterization of these therapeutic proteins should be required. In this manuscript, methods of chemical and physical characterization of therapeutic proteins are described. In terms of chemical characterization, analysis of chemical modifications of the constituent amino acids is explained. Physical characterization includes higher order structural analysis and assessment of protein aggregates. Quantification methods of aggregates with different sizes, recently encouraged by the U.S. Food and Drug Administration (FDA), are introduced. As for the stability of therapeutic proteins, the importance of chemical and physical stability is explained. Finally, the contribution of colloidal and structural stability to the production of an antibody drug less prone to aggregation is introduced.

  10. Subterranean barriers including at least one weld

    DOEpatents

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  11. Modification of chemical additives to elastomeric compositions

    NASA Astrophysics Data System (ADS)

    Mukhutdinov, A. A.; Grishin, B. S.

    1994-08-01

    The physicochemical principles of the modification of crystalline chemical additives to elastomeric compositions are examined. A classification of various types of modifications based on scientific principles is given. The modifications are subdivided into physical and physicochemical depending on the configuration of the molecules in the crystals, the defectiveness and dispersity of the crystalline particles, the melting points of the crystals, and the presence of necleophilic and electrophylic centres in the molecules of the components of binary and complex eutectic mixtures. The effectiveness of the modification of the chemical additives is determined by the manifestation in binary systems of these components in elastomeric compositions of physical and chemical synergism due to the occurrence of the relevant processes in such systems. A relation has been discovered between the physical and chemical phenomena accompanying the modification of the chemical additives in binary and complex eutectic mixtures, their influence on the properties of the elastomeric composition is examined, the ecological problems associated with the processing of such materials are discussed, and the relation between the structure and properties of the molecules of the additives is analysed using quantum-chemical calculations. The bibliography includes 92 references.

  12. Power generation method including membrane separation

    DOEpatents

    Lokhandwala, Kaaeid A.

    2000-01-01

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  13. New STD recommendations include HIV management.

    PubMed

    1998-03-01

    The Centers for Disease Control and Prevention (CDC) has updated its 1993 guidelines for STDs, adding new recommendations for treating primary and recurrent genital warts and for managing patients with asymptomatic HIV infection. The guidelines grew out of research into microbiologic cures, alleviating signs and symptoms, preventing sequelae, and preventing transmission. The guidelines recommend that people seeking treatment for STDs should be offered HIV testing and counseling. Results of a recent Alan Guttmacher Institute study of STD public health programs are included.

  14. Temporary agency contracts: what should they include?

    PubMed

    Sferrella, Sheila M

    2002-01-01

    The AHRA Board committed to provide some tools to help our members with agency contracts. This article provides the sections for a contract and what they should include. Of course, the language will have to comply with your organization's requirements. To comply with HIPAA regulations for contracts, I've also included language for business associates. JCAHO requires that the following documentation be on file for all contracted personnel: 1. Hospital job description or formal contract outlining the job responsibilities. 2. All licenses, certifications and registrations are reviewed and a process is developed to ensure that they remain current. 3. Competency is evaluated and maintained. 4. Evidence that personnel received a general orientation. 5. Evidence that personnel received a departmental orientation. 6. Safety and infection control standards must be met. In order to aid with compliance when utilizing contracted personnel, my organization developed a Contractor Personnel Administrative Compliance Checklist, which identifies requirements for compliance, a reference for assistance, and places to record that the requirement has been met for each of the areas listed in the previous item. Our standard contract includes sections on general definition of engagement, credentials and work experience; health, including immunization and drug testing; corporation; JCAHO; terms of the contract; and, non-disclosure of information. A business associate agreement may be necessary to comply with HIPAA regulations. Using the template has made my job much easier than trying to read each contract that crosses my desk. If an agency refuses to sign our contract, then we do not conduct business with that company. If an agency requests changes to the contract, depending on the language, we may or may not agree to it. This information is not intended to be legal advice, but rather an educational overview. As with any contract, the reader should consult with legal counsel at his or her

  15. Electric power monthly, September 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  16. Temporary agency contracts: what should they include?

    PubMed

    Sferrella, Sheila M

    2002-01-01

    The AHRA Board committed to provide some tools to help our members with agency contracts. This article provides the sections for a contract and what they should include. Of course, the language will have to comply with your organization's requirements. To comply with HIPAA regulations for contracts, I've also included language for business associates. JCAHO requires that the following documentation be on file for all contracted personnel: 1. Hospital job description or formal contract outlining the job responsibilities. 2. All licenses, certifications and registrations are reviewed and a process is developed to ensure that they remain current. 3. Competency is evaluated and maintained. 4. Evidence that personnel received a general orientation. 5. Evidence that personnel received a departmental orientation. 6. Safety and infection control standards must be met. In order to aid with compliance when utilizing contracted personnel, my organization developed a Contractor Personnel Administrative Compliance Checklist, which identifies requirements for compliance, a reference for assistance, and places to record that the requirement has been met for each of the areas listed in the previous item. Our standard contract includes sections on general definition of engagement, credentials and work experience; health, including immunization and drug testing; corporation; JCAHO; terms of the contract; and, non-disclosure of information. A business associate agreement may be necessary to comply with HIPAA regulations. Using the template has made my job much easier than trying to read each contract that crosses my desk. If an agency refuses to sign our contract, then we do not conduct business with that company. If an agency requests changes to the contract, depending on the language, we may or may not agree to it. This information is not intended to be legal advice, but rather an educational overview. As with any contract, the reader should consult with legal counsel at his or her

  17. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  18. Rotor assembly including superconducting magnetic coil

    DOEpatents

    Snitchler, Gregory L.; Gamble, Bruce B.; Voccio, John P.

    2003-01-01

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  19. Fire extinct experiments with water mist by adding additives

    NASA Astrophysics Data System (ADS)

    Yang, Lijun; Zhao, Jianbo

    2011-12-01

    The effects of fire extinguishment with water mist by adding different additives were studied. Tens of chemical substances (including alkali metal salt, dilution agent and surface active agent) were selected as additives due to their different extinct mechanisms. At first the performance of fire extinguishment with single additive was studied, then the effects of the same kinds of chemical substances under the same mass fraction were compared to study their influences on the fire extinguishment factors, including extinct time, fire temperature and oxygen concentration from which the fire extinct mechanism with additives could be concluded. Based on this the experiments were conducted to study the cooperate effect of the complexity of different additives. It indicated the relations between different firefighting mechanisms and different additives were competitive. From a large number of experiments the extinct mechanism with water mist by adding additives was concluded and an optimal compounding additive was selected.

  20. Laboratory tests of sludge-control additives

    SciTech Connect

    Tatnall, R.E.

    1996-07-01

    Laboratory {open_quotes}jar{close_quotes} tests compared eleven different fuel oil and diesel fuel sludge-control additives. Factors studied included (1) ability to disperse and prevent buildup of sludge deposits on surfaces, (2) ability to protect steel from corrosion, (3) ability to inhibit growth and proliferation of bacteria, and (4) ability to disperse water. Results varied greatly, and it was found that many commercial products do not do what they claim. It is concluded that fuel retailers should not believe manufacturers` claims for their additive products, but rather should test such products themselves to be sure that the benefits of treatment are real. A simplified form of the procedure used here is proposed as one way for dealers to do such testing.