Science.gov

Sample records for additional research aimed

  1. The Florida State Twin Registry: research aims and design.

    PubMed

    Taylor, Jeanette E; James, Lisa M; Reeves, Mark D; Bobadilla, Leonardo

    2006-12-01

    Relatively little is known about the relationship of most personality disorders to executive cognitive functioning despite their associations with frontal cortex activity. Research on genetic influence is lacking for most personality disorders, and research on genetic influences associated with executive cognitive functioning is sparse and mixed. The Florida State Twin Registry was created to conduct a pilot twin study aimed at examining genetic influence on personality disorders and executive cognitive functioning. Measures included structured clinical interviews for symptoms and diagnoses of personality disorders (borderline, histrionic, narcissistic, antisocial, obsessive-compulsive, avoidant, and dependent), depression, substance abuse/dependence, anxiety disorders, and eating disorders. The Wisconsin Card Sorting Test and the Stroop Color-Word Test were administered to assess executive cognitive functioning. Self-report questionnaires were included to assess maladaptive personality traits. Data sharing and future directions for growing the Florida State Twin Registry are discussed. PMID:17254436

  2. Research aims at development of laser-guided electron beam

    NASA Astrophysics Data System (ADS)

    Kozicharow, E.

    1985-02-01

    The U.S. Department of Defense is conducting a technology development program that may result in the stationing of a laser-guided electron beam weapon, at ionospheric altitudes of 80-600 km, for the interception and destruction of Soviet ICBMs at ranges of more than 1000 miles. This research program is pursuing the principle of ion-focused propagation, which resolves the problem of atmospheric beam scattering by ionizing a channel in the atmospheric medium with a laser. Also discussed is the development status of space-based particle beams and lasers, ground-based laser systems employing orbiting mirror platforms for beam aiming, and nuclear device-powered directed energy weapons.

  3. New Program Aims $300-Million at Young Biomedical Researchers

    ERIC Educational Resources Information Center

    Goodall, Hurley

    2008-01-01

    Medical scientists just starting at universities have been, more and more often, left empty-handed when the federal government awards grants. To offset this, the Howard Hughes Medical Institute, a nonprofit organization dedicated to medical research, announced a new program that will award $300-million to as many as 70 young scientists. The Early…

  4. Status of research aimed at predicting structural integrity

    SciTech Connect

    Reuter, W.G.

    1997-12-31

    Considerable research has been performed throughout the world on measuring the fracture toughness of metals. The existing capability fills the need encountered when selecting materials, thermal-mechanical treatments, welding procedures, etc., but cannot predict the fracture process of structural components containing cracks. The Idaho National Engineering and Environmental Laboratory and the Massachusetts Institute of Technology have been collaborating for a number of years on developing capabilities for using fracture toughness results to predict structural integrity. Because of the high cost of fabricating and testing structural components, these studies have been limited to predicting the fracture process in specimens containing surface cracks. This paper summarizes the present status of the experimental studies of using fracture toughness data to predict crack growth initiation in specimens (structural components) containing surface cracks. These results are limited to homogeneous base materials.

  5. [AGIKO (Clinical Research Fellow); a training model aimed at enhancement of clinical scientific research].

    PubMed

    van Rees-Wortelboer, M M; Lamberts, S W; Klasen, E C

    1997-06-21

    The enhancement of clinical scientific research in the Netherlands is being stimulated to a substantial extent by the introduction and stimulation of a training model aimed at the combined training of physicians to both a general practitioner or specialist and a clinical researcher, the AGIKO (Clinical Research Fellow). The model has been recognized by the Central College for Recognition and Registration of Medical Specialists. Extra stimulation by the section Medical Sciences of the Netherlands Organization for Scientific Research (MW-NWO) makes it possible to appoint AGIKOs on second or third flows of funds but also within the first flow of funds. During the last two years, 25 AGIKO applications from ten medical specialisms have been approved. The AGIKO model may help to meet (expected) needs for future clinical-medical research workers in specific research areas. PMID:9380169

  6. Research Networking Systems: The State of Adoption at Institutions Aiming to Augment Translational Research Infrastructure

    PubMed Central

    Obeid, Jihad S; Johnson, Layne M; Stallings, Sarah; Eichmann, David

    2015-01-01

    Fostering collaborations across multiple disciplines within and across institutional boundaries is becoming increasingly important with the growing emphasis on translational research. As a result, Research Networking Systems that facilitate discovery of potential collaborators have received significant attention by institutions aiming to augment their research infrastructure. We have conducted a survey to assess the state of adoption of these new tools at the Clinical and Translational Science Award (CTSA) funded institutions. Survey results demonstrate that most CTSA funded institutions have either already adopted or were planning to adopt one of several available research networking systems. Moreover a good number of these institutions have exposed or plan to expose the data on research expertise using linked open data, an established approach to semantic web services. Preliminary exploration of these publically-available data shows promising utility in assessing cross-institutional collaborations. Further adoption of these technologies and analysis of the data are needed, however, before their impact on cross-institutional collaboration in research can be appreciated and measured. PMID:26491707

  7. Hypersonic research engine project. Phase 2: Aerothermodynamic Integration Model (AIM) test report

    NASA Technical Reports Server (NTRS)

    Andersen, W. L.; Kado, L.

    1975-01-01

    The Hypersonic Research Engine-Aerothermodynamic Integration Model (HRE-AIM) was designed, fabricated, and tested in the Hypersonic Tunnel Facility. The HRE-AIM is described along with its installation in the wind tunnel facility. Test conditions to which the HRE-AIM was subjected and observations made during the tests are discussed. The overall engine performance, component interaction, and ignition limits for the design are evaluated.

  8. DIZZYNET-a European network initiative for vertigo and balance research: visions and aims.

    PubMed

    Zwergal, Andreas; Brandt, Thomas; Magnusson, Mans; Kennard, Christopher

    2016-04-01

    Vertigo is one of the most common complaints in medicine. Despite its high prevalence, patients with vertigo often receive either inappropriate or inadequate treatment. The most important reasons for this deplorable situation are insufficient interdisciplinary cooperation, nonexistent standards in diagnostics and therapy, the relatively rare translations of basic science findings to clinical applications, and the scarcity of prospective controlled multicenter clinical trials. To overcome these problems, the German Center for Vertigo and Balance Disorders (DSGZ) started an initiative to establish a European Network for Vertigo and Balance Research called DIZZYNET. The central aim is to create a platform for collaboration and exchange among scientists, physicians, technicians, and physiotherapists in the fields of basic and translational research, clinical management, clinical trials, rehabilitation, and epidemiology. The network will also promote public awareness and help establish educational standards in the field. The DIZZYNET has the following objectives as regards structure and content: to focus on multidisciplinary translational research in vertigo and balance disorders, to develop interdisciplinary longitudinal and transversal networks for patient care by standardizing and personalizing the management of patients, to increase methodological competence by implementing common standards of practice and quality management, to internationalize the infrastructure for prospective multicenter clinical trials, to increase recruitment capacity for clinical trials, to create a common data base for patients with vertigo and balance disorders, to offer and promote attractive educational and career paths in a network of cooperating institutions. In the long term, the DIZZYNET should serve as an internationally visible network for interdisciplinary and multiprofessional research on vertigo and balance disorders. It ideally should equally attract the afflicted patients and

  9. International Alzheimer's Disease Research Portfolio (IADRP) aims to capture global Alzheimer's disease research funding.

    PubMed

    Liggins, Charlene; Snyder, Heather M; Silverberg, Nina; Petanceska, Suzana; Refolo, Lorenzo M; Ryan, Laurie; Carrillo, Maria C

    2014-05-01

    Alzheimer's disease (AD) is a recognized international public health crisis. There is an urgent need for public and private funding agencies around the world to coordinate funding strategies and leverage existing resources to enhance and expand support of AD research. To capture and compare their existing investments in AD research and research-related resources, major funding organizations are starting to utilize the Common Alzheimer's Disease Research Ontology (CADRO) to categorize their funding information. This information is captured in the International Alzheimer's Disease Research Portfolio (IADRP) for further analysis. As of January, 2014, over fifteen organizations from the US, Canada, Europe and Australia have contributed their information. The goal of the IADRP project is to enable funding organizations to assess the changing landscape of AD research and coordinate strategies, leverage resources, and avoid duplication of effort. PMID:24780512

  10. Patient-powered research networks aim to improve patient care and health research.

    PubMed

    Fleurence, Rachael L; Beal, Anne C; Sheridan, Susan E; Johnson, Lorraine B; Selby, Joe V

    2014-07-01

    The era of big data, loosely defined as the development and analysis of large or complex data sets, brings new opportunities to empower patients and their families to generate, collect, and use their health information for both clinical and research purposes. In 2013 the Patient-Centered Outcomes Research Institute launched a large national research network, PCORnet, that includes both clinical and patient-powered research networks. This article describes these networks, their potential uses, and the challenges they face. The networks are engaging patients, family members, and caregivers in four key ways: contributing data securely, with privacy protected; including diverse and representative groups of patients in research; prioritizing research questions, participating in research, and disseminating results; and participating in the leadership and governance of patient-powered research networks. If technical, regulatory, and organizational challenges can be overcome, PCORnet will allow research to be conducted more efficiently and cost-effectively and results to be disseminated quickly back to patients, clinicians, and delivery systems to improve patient health. PMID:25006148

  11. Interventions aimed at increasing research use in nursing: a systematic review

    PubMed Central

    Thompson, David S; Estabrooks, Carole A; Scott-Findlay, Shannon; Moore, Katherine; Wallin, Lars

    2007-01-01

    Background There has been considerable interest recently in developing and evaluating interventions to increase research use by clinicians. However, most work has focused on medical practices; and nursing is not well represented in existing systematic reviews. The purpose of this article is to report findings from a systematic review of interventions aimed at increasing research use in nursing. Objective To assess the evidence on interventions aimed at increasing research use in nursing. Methods A systematic review of research use in nursing was conducted using databases (Medline, CINAHL, Healthstar, ERIC, Cochrane Central Register of Controlled Trials, and Psychinfo), grey literature, ancestry searching (Cochrane Database of Systematic Reviews), key informants, and manual searching of journals. Randomized controlled trials and controlled before- and after-studies were included if they included nurses, if the intervention was explicitly aimed at increasing research use or evidence-based practice, and if there was an explicit outcome to research use. Methodological quality was assessed using pre-existing tools. Data on interventions and outcomes were extracted and categorized using a pre-established taxonomy. Results Over 8,000 titles were screened. Three randomized controlled trials and one controlled before- and after-study met the inclusion criteria. The methodological quality of included studies was generally low. Three investigators evaluated single interventions. The most common intervention was education. Investigators measured research use using a combination of surveys (three studies) and compliance with guidelines (one study). Researcher-led educational meetings were ineffective in two studies. Educational meetings led by a local opinion leader (one study) and the formation of multidisciplinary committees (one study) were both effective at increasing research use. Conclusion Little is known about how to increase research use in nursing, and the evidence to

  12. Interpretive Research Aiming at Theory Building: Adopting and Adapting the Case Study Design

    ERIC Educational Resources Information Center

    Diaz Andrade, Antonio

    2009-01-01

    Although the advantages of case study design are widely recognised, its original positivist underlying assumptions may mislead interpretive researchers aiming at theory building. The paper discusses the limitations of the case study design for theory building and explains how grounded theory systemic process adds to the case study design. The…

  13. Plastic Surgery Practice Models and Research Aims Under the Patient Protection and Affordable Care Act

    PubMed Central

    Giladi, Aviram M.; Yuan, Frank; Chung, Kevin C.

    2014-01-01

    As the healthcare landscape in the United States changes under the Affordable Care Act (ACA), providers are set to face numerous new challenges. Although concerns about practice sustainability with declining reimbursement have dominated the dialogue, there are more pressing changes to the healthcare funding mechanism as a whole that must be addressed. Plastic surgeons, involved in various practice models each with different relationships to hospitals, referring physicians, and payers, must understand these reimbursement changes in order to dictate adequate compensation in the future. Here we discuss bundle payments and Accountable Care Organizations (ACOs), and how plastic surgeons might best engage in these new system designs. In addition, we review the value of a focused and driven health-services research agenda in plastic surgery, and the importance of this research in supporting long-term financial stability for the specialty. PMID:25626805

  14. Educational strategies aimed at improving student nurse's medication calculation skills: a review of the research literature.

    PubMed

    Stolic, Snezana

    2014-09-01

    Medication administration is an important and essential nursing function with the potential for dangerous consequences if errors occur. Not only must nurses understand the use and outcomes of administering medications they must be able to calculate correct dosages. Medication administration and dosage calculation education occurs across the undergraduate program for student nurses. Research highlights inconsistencies in the approaches used by academics to enhance the student nurse's medication calculation abilities. The aim of this integrative review was to examine the literature available on effective education strategies for undergraduate student nurses on medication dosage calculations. A literature search of five health care databases: Sciencedirect, Cinahl, Pubmed, Proquest, Medline to identify journal articles between 1990 and 2012 was conducted. Research articles on medication calculation educational strategies were considered for inclusion in this review. The search yielded 266 papers of which 20 meet the inclusion criteria. A total of 5206 student nurse were included in the final review. The review revealed educational strategies fell into four types of strategies; traditional pedagogy, technology, psychomotor skills and blended learning. The results suggested student nurses showed some benefit from the different strategies; however more improvements could be made. More rigorous research into this area is needed. PMID:25001180

  15. Personality Development in Two Cultures. A Selective Review on Research Aims and Issues.

    ERIC Educational Resources Information Center

    Thomae, Hans

    1979-01-01

    Summarizes the major forms of cross-cultural research on personality development and discusses their contribution to developmental research. Also discusses some major issues in research on acculturation. (Author/SS)

  16. Small is beautiful but smaller is the aim: review of a life of research.

    PubMed

    Curtis, A S G

    2004-01-01

    Background and origins of research of Adam Curtis. One persisting theme has been the pursuit of different landscapes at different scales to discover the routes to explain how the body is built. His research life fell in a fortunate period during which techniques and concepts for investigating structure have improved year by year. His most fortunate encounter was with Michael Abercrombie and his views on the social behaviour of cells, aims for quantitation, and statistical testing. Adam worked in various environments--in turn Geology as an undergraduate, Biophysics Ph.D. in a Genetics department and various departments in turn from anatomy via zoology to Cell Biology. Adam started his Ph.D. work in cell adhesion, studying cell movement, trapping and reaggregation phenomena, having an early start from the physico-chemical viewpoint. He made quantitative measurements of cell adhesion by kinetic methods. Interference reflection microscopy (IRM) and related optical interference techniques were brought into the field of biology by him. In turn this led with Chris Wilkinson, a long term colleague, to the use of micro- and nanofabrication for biological research. Polscope and photoelastic measurements were introduced to biology recently in his laboratory. One long term theme has been to map the adhesion of cells to substrates to discover contact areas. Early data came from IRM and then TIRF (Total Internal Reflection Fluorescence Microscopy) and then from Forster Resonance Energy Microscopy (FRET). Another important theme was the time scale that needed to be measured--very short indeed in suspension. This was very difficult and has only become possible very recently but hydrodynamic calculation shows it must be very short. The attractions of the Derjagin-Landau-Verwey-Overbeek theory (DLVO theory) are that they explain many features of biological adhesion. The main test of this theory depends upon the energy of the adhesion at various different separation distances between

  17. Proto-Typing Research Aimed for Secondary School Students and Teachers

    NASA Astrophysics Data System (ADS)

    Walker, C. E.; Fersch, A.; Barringer, D.; Pompea, S. M.

    2011-12-01

    , Sky Quality Meter (SQM) measurements were subsequently used as a more objective source of data. In addition, the area over which the data was taken was expanded to redress spurious edge effects in making contour maps. During the summer of 2011, the second REU student took more SQM data and, with the SQM database from GLOBE at Night and the assistance of the AzGFD, performed a logistic regression analysis with respect to the bats' flight paths to determine whether the bats preferred or avoided flight through regions of particular night sky brightness levels. During the presentation, we will provide more on the analysis and conclusions of the research, as well as the extension of the program to secondary students and teachers. Should the conclusion be that the bats are preferentially staying in darker areas, a next step for students and teachers would include helping to maintain a dark corridor where the T&E lesser long nosed bats travel between roosts and foraging areas. Should this prototype project succeed, it will be used as a template for other REU and secondary school research projects on endangered animals across the U.S. affected by light pollution. Teacher professional development will play a big role in the program's future success.

  18. Asphalt and asphalt additives. Transportation research record

    SciTech Connect

    Not Available

    1992-01-01

    Contents: use of asphalt emulsions for in-place recycling: oregon experience; gap-graded cold asphalt concrete: benefits of polymer-modified asphalt cement and fibers; cold in-place recycling for rehabilitation and widening of low-volume flexible pavements in indiana; in situ cold recycling of bituminous pavements with polymer-modified high float emulsions; evaluation of new generation of antistripping additives; correlation between performance-related characteristics of asphalt cement and its physicochemical parameters using corbett's fractions and hpgc; reaction rates and hardening susceptibilities as determined from pressure oxygen vessel aging of asphalts; evaluation of aging characteristics of asphalts by using tfot and rtfot at different temperature levels; summary of asphalt additive performance at selected sites; relating asphalt absorption to properties of asphalt cement and aggregate; study of the effectiveness of styrene-butadiene rubber latex in hot mix asphalt mixes; stability of straight and polymer-modified asphalts.

  19. OVERVIEW OF US EPA RESEARCH ACTIVITIES AIMED AT CHARACTERIZING CHILDREN'S EXPOSURES

    EPA Science Inventory


    Given the potential vulnerability of children to the effects of environmental exposures, understanding the relationship between children's health outcomes and environmental exposures is an important research need to reduce uncertainty in risk assessment. Over the past 8 year...

  20. (WISCONSIN) OVERVIEW OF US EPA RESEARCH ACTIVITIES AIMED AT CHARACTERIZING CHILDRENS EXPOSURES

    EPA Science Inventory

    Overview of significant research activities that have been initiated by the USEPA to increase understanding of children’s vulnerabilities and to better characterize children’s exposures to chemical stressors.

  1. What are our AIMs? Interdisciplinary Perspectives on the Use of Ancestry Estimation in Disease Research

    PubMed Central

    Taylor, Janelle S.; Edwards, Karen L.; Fullerton, Stephanie M.

    2014-01-01

    Background Ancestry estimation serves as a tool to identify genetic contributions to disease but may contribute to racial discrimination and stigmatization. We sought to understand user perspectives on the benefits and harms of ancestry estimation to inform research practice and contribute to debates about the use of race and ancestry in genetics. Methods Key informant interviews with 22 scientists were conducted to examine scientists’ understandings of the benefits and harms of ancestry estimation. Results Three main perspectives were observed among key informant scientists who use ancestry estimation in genetic epidemiology research. Population geneticists self identified as educators who controlled the meaning and application of ancestry estimation in research. Clinician-researchers were optimistic about the application of ancestry estimation to individualized risk assessment and personalized medicine. Epidemiologists remained ambivalent toward ancestry estimation and suggested a continued role for race in their research. Conclusions We observed an imbalance of control over the meaning and application of ancestry estimation among disciplines that may result in unwarranted or premature translation of ancestry estimation into medicine and public health. Differences in disciplinary perspectives need to be addressed if translational benefits of genetic ancestry estimation are to be realized. PMID:25419472

  2. Time to RE-AIM: Why Community Weight Loss Programs Should Be Included in Academic Obesity Research

    PubMed Central

    Prochazka, Allan V.; Glasgow, Russell E.

    2016-01-01

    Despite decades of efficacy-based research on weight loss interventions, the obesity epidemic in the United States persists, especially in underserved populations. We used the RE-AIM (Reach, Efficacy/Effectiveness, Adoption, Implementation, and Maintenance) framework to describe the limitations of the current paradigm of efficacy-based research for weight loss interventions. We also used RE-AIM to propose that existing weight loss interventions (community-based programs) such as Jenny Craig, Take Off Pounds Sensibly (TOPS), and Weight Watchers be studied to supplement the efficacy-based research approaches to achieve population-level impact on obesity. PMID:26986540

  3. Making the case for change: What researchers need to consider when designing behavior change interventions aimed at improving medication dispensing.

    PubMed

    Cadogan, Cathal A; Ryan, Cristín; Hughes, Carmel

    2016-01-01

    There is a growing emphasis on behavior change in intervention development programmes aimed at improving public health and healthcare professionals' practice. A number of frameworks and methodological tools have been established to assist researchers in developing interventions seeking to change healthcare professionals' behaviors. The key features of behavior change intervention design involve specifying the target group (i.e. healthcare professional or patient cohort), the target behavior and identifying mediators (i.e. barriers and facilitators) of behavior change. Once the target behavior is clearly specified and understood, specific behavior change techniques can then be used as the basis of the intervention to target identified mediators of behavior change. This commentary outlines the challenges for pharmacy practice-based researchers in targeting dispensing as a behavior when developing behavior change interventions aimed at pharmacists and proposes a definition of dispensing to consider in future research. PMID:25936272

  4. AIM satellite-based research bridges the unique scientific aspects of the mission to informal education programs globally

    NASA Astrophysics Data System (ADS)

    Robinson, D.; Maggi, B.

    2003-04-01

    The Education and Public Outreach (EPO) component of the satellite-based research mission "Aeronomy of Ice In the Mesosphere" (AIM) will bridge the unique scientific aspects of the mission to informal education organizations. The informal education materials developed by the EPO will utilize AIM data and educate the public about the environmental implications associated with the data. This will assist with creating a scientifically literate workforce and in developing a citizenry capable of making educated decisions related to environmental policies and laws. The objective of the AIM mission is to understand the mechanisms that cause Polar Mesospheric Clouds (PMCs) to form, how their presence affects the atmosphere, and how change in the atmosphere affects them. PMCs are sometimes known as Noctilucent Clouds (NLCs) because of their visibility during the night from appropriate locations. The phenomenon of PMCs is an observable indicator of global change, a concern to all citizens. Recent sightings of these clouds over populated regions have compelled AIM educators to expand informal education opportunities to communities worldwide. Collaborations with informal organizations include: Museums/Science Centers; NASA Sun-Earth Connection Forum; Alaska Native Ways of Knowing Project; Amateur Noctilucent Cloud Observers Organization; National Parks Education Programs; After School Science Clubs; Public Broadcasting Associations; and National Public Radio. The Native Ways of Knowing Project is an excellent example of informal collaboration with the AIM EPO. This Alaska based project will assist native peoples of the state with photographing NLCs for the EPO website. It will also aid the EPO with developing materials for informal organizations that incorporate traditional native knowledge and science, related to the sky. Another AIM collaboration that will offer citizens lasting informal education opportunities is the one established with the United States National Parks

  5. Community-based participatory research: a capacity-building approach for policy advocacy aimed at eliminating health disparities.

    PubMed

    Israel, Barbara A; Coombe, Chris M; Cheezum, Rebecca R; Schulz, Amy J; McGranaghan, Robert J; Lichtenstein, Richard; Reyes, Angela G; Clement, Jaye; Burris, Akosua

    2010-11-01

    There have been increasing calls for community-academic partnerships to enhance the capacity of partners to engage in policy advocacy aimed at eliminating health disparities. Community-based participatory research (CBPR) is a partnership approach that can facilitate capacity building and policy change through equitable engagement of diverse partners. Toward this end, the Detroit Community-Academic Urban Research Center, a long-standing CBPR partnership, has conducted a policy training project. We describe CBPR and its relevance to health disparities; the interface between CBPR, policy advocacy, and health disparities; the rationale for capacity building to foster policy advocacy; and the process and outcomes of our policy advocacy training. We discuss lessons learned and implications for CBPR and policy advocacy to eliminate health disparities. PMID:20864728

  6. ["The aim is familiarity with the infant". Work and research in the Jackson Nursery (Vienna 1937/38)].

    PubMed

    Krivanek, Roman

    2014-01-01

    The "Jackson Nursery", existing from February 1937 until March 1938, was directed by Anna Freud and financed by Edith Jackson and Dorothy Burlingham. It took care of infants from the poorest strata of Vienna and also gave material support to their families. On the other hand, it was a training institution for psychoanalysts, offering the opportunity of observing children during their first two years, e. g. their feeding habits and social sense. In addition, the Jackson Nursery was a place for research where psychoanalytic theories of infantile development were checked against the findings of direct observation. The work started here was then continued by A. Freud and D. Burlingham on a larger scale in their War Nurseries.--This paper examines the many-sided activities in the nursery mainly on the basis of unpu blished archival documents. PMID:24988807

  7. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  8. Researchers Weigh Benefits of One Computer per Lap: Studies Aim to Determine the Impact the Technology Has on Student Learning

    ERIC Educational Resources Information Center

    Borja, Rhea R.

    2006-01-01

    Almost one-quarter of school districts nationwide and nine states have invested millions of dollars in "one-to-one" laptop programs, hoping the availability of a computer for every student will improve achievement and other skills. They made those investments despite the fact that research on the impact of such technology on student achievement is…

  9. Prediflood: A French research project aiming at developing a road submersion warning system for flash flood prone areas

    NASA Astrophysics Data System (ADS)

    Naulin, J. P.; Payrastre, O.; Gaume, E.; Delrieu, G.; Arnaud, P.; Lutoff, C.; Vincendon, B.

    2010-09-01

    Accurate flood forecasts are crucial for an efficient flood event management. Until now, hydro-meteorological forecasts have been mainly used for early-warnings in France (Meteorological and flood vigilance maps) or over the world (Flash-flood guidances). Forecasts are also often limited to the main streams or to specific watersheds with particular assets like hydropower dams, leaving aside large parts of the territory. Distributed hydro-meteorological forecasting models, able to take advantage of the now available high spatial and temporal resolution rainfall measurements, are promising tools for anticipating and quantifying the short term consequences of storm events all over a region. They would be very useful, especially in regions frequently affected by severe storms with complex spatio-temporal patterns. They would provide the necessary information for flood event management services to identify the areas at risk and to take the appropriate safety and rescue measures: prepositioning of rescue means, stopping of the traffic on exposed roads, determination of safe accesses or evacuation routes. Some preliminary tests conducted by the LCPC within the European project FLOODsite have shown encouraging results of a distributed hydro-meteorological forecasting model. It seems possible, despite the limits of the available rainfall measurements and the shortcomings of the rainfall-runoff models, to deliver distributed forecasts of possible local flood consequences - road submersion risk rating at about 5000 different locations over the Gard department in the tested case - with an acceptable level of accuracy. The PreDiFlood project (http://heberge.lcpc.fr/prediflood/) aims at consolidating and extending these first results with the objective to conduct pre-operational tests with possible end-users at the end of the project. Such a tool will not replace, but complement existing flood forecasting approaches in time and space domains that have not been covered until now

  10. Hypersonic research engine project. Phase 2: Preliminary report on the performance of the HRE/AIM at Mach 6

    NASA Technical Reports Server (NTRS)

    Sun, Y. H.; Sainio, W. C.

    1975-01-01

    Test results of the Aerothermodynamic Integration Model are presented. A program was initiated to develop a hydrogen-fueled research-oriented scramjet for operation between Mach 3 and 8. The primary objectives were to investigate the internal aerothermodynamic characteristics of the engine, to provide realistic design parameters for future hypersonic engine development as well as to evaluate the ground test facility and testing techniques. The engine was tested at the NASA hypersonic tunnel facility with synthetic air at Mach 5, 6, and 7. The hydrogen fuel was heated up to 1500 R prior to injection to simulate a regeneratively cooled system. The engine and component performance at Mach 6 is reported. Inlet performance compared very well both with theory and with subscale model tests. Combustor efficiencies up to 95 percent were attained at an equivalence ratio of unity. Nozzle performance was lower than expected. The overall engine performance was computed using two different methods. The performance was also compared with test data from other sources.

  11. Research on Youth Violence: Progress by Replacement, Not Addition.

    ERIC Educational Resources Information Center

    Hoagwood, Kimberly

    2000-01-01

    This article discusses the need to concentrate more educational research into efficacy studies on the effectiveness of specific preventive and treatment interventions targeted at disruptive behavior disorders. Other research needs are highlighted such as underlying mechanisms by which aggressive behavior develops, involvement in gangs, positive…

  12. BILL E. KUNKLE INTERDISCIPLINARY BEEF SYMPOSIUM: A meta-analysis of research efforts aimed at reducing the impact of fescue toxicosis on cattle weight gain and feed intake.

    PubMed

    Gadberry, M S; Hawley, J; Beck, P A; Jennings, J A; Kegley, E B; Coffey, K P

    2015-12-01

    The objective of this paper is to present a systematic review and meta-analysis of research efforts aimed at recovering cattle production losses attributed to toxic endophyte-infected [ (Morgan-Jones & Gams.) Glenn, Bacon, & Hanlin comb. Nov.] tall fescue [ (Schreb.) Darbysh.]. The strategies presented include those 1) applied with forage systems, 2) based on pharmacological compounds and functional foods, and 3) based on supplemental dietary nutrients. Cattle BW gain and DM intake was the dependent response evaluated. Among the forage systems reviewed, studies with nontoxic, endophyte-infected tall fescue as a total replacement forage system demonstrated the greatest improvement in per-hectare (152 ± 27.5 kg/ha) and per-animal (0.29 ± 0.03 kg/d) BW gain. Studies with interseeded legumes have exhibited a small and highly variable BW gain effect size per hectare (52 ± 24.1 kg/ha) and per animal (0.11 ± 0.03 kg/d). The legume response was seasonal, with summer exhibiting the greatest benefit. Studies with chemicals that suppress plant growth demonstrated BW gain responses (0.17 ± 0.06 kg/d) equal to or greater than the response observed with legume studies. Cattle grazing toxic tall fescue responded well to anthelmentics, antimicrobial feed additives, and steroid implants, and the use of these technologies may additively help recover production losses. As a group, functional foods have not improved BW gain ( = 0.85). Studies with cattle supplemented with highly digestible fiber supplements observed a 0.15 kg greater BW gain compared with studies using starch- and sugar-based supplements ( < 0.05). Weight gain was positively impacted by the level of supplementation (0.06 kg/DM intake as percent BW). Supplement feed conversion was estimated at 6:1 for the highly digestible fiber supplements compared with 11:1 for starch-based supplements. Tall fescue forage DM intake was predicted to maximize at a supplemental feeding rate of 0.24% BW with a breakpoint at 0.5% BW

  13. [Aiming for zero blindness].

    PubMed

    Nakazawa, Toru

    2015-03-01

    Glaucoma is the leading cause of acquired blindness in Japan. One reason that it often leads to blindness is that it can continue to worsen even after effective medical reduction of intraocular pressure (IOP), the only evidence-based treatment. The limitations of current treatments make it critical to identify IOP-independent factors that can cause glaucoma and develop new drugs to target these factors. This is a challenging task, as the pathology of glaucoma is thought to be very complex, with different combinations of factors underlying its development and progression in different patients. Additionally, there is a deficiency in methods to efficiently perform clinical evaluations and reliably probe the state of the disease over relatively short periods. In addition, newly developed drugs need to be evaluated with clinical trials, for which human and financial resources are limited, before they can be widely used for treatment. Taking all these issues into consideration, it is evident that there are two urgent issues to consider: the development of methods to classify glaucoma in detail based on its pathology, and the improvement of clinical evaluation methods. In this review, we discuss some of our efforts to develop new neuroprotective agents for glaucoma, with a focus on the following three areas: 1. Clinical research and development of methods to classify glaucoma in detail based on IOP-independent factors, and the exploration of possibilities for the improvement of clinical evaluation of glaucoma. 2. Pathology-based research and development of new drugs for glaucoma, focusing on comprehensive gene expression analysis and the development of molecule-targeting drugs, using murine optic nerve crush as a disease model. 3. Development of next generation in vivo imaging modalities and the establishment of infrastructure enabling "big-data" analysis. First, we discuss our clinical research and the development of methods to classify glaucoma in detail based on IOP

  14. Campus Grids: Bringing Additional Computational Resources to HEP Researchers

    NASA Astrophysics Data System (ADS)

    Weitzel, Derek; Fraser, Dan; Bockelman, Brian; Swanson, David

    2012-12-01

    It is common at research institutions to maintain multiple clusters that represent different owners or generations of hardware, or that fulfill different needs and policies. Many of these clusters are consistently under utilized while researchers on campus could greatly benefit from these unused capabilities. By leveraging principles from the Open Science Grid it is now possible to utilize these resources by forming a lightweight campus grid. The campus grids framework enables jobs that are submitted to one cluster to overflow, when necessary, to other clusters within the campus using whatever authentication mechanisms are available on campus. This framework is currently being used on several campuses to run HEP and other science jobs. Further, the framework has in some cases been expanded beyond the campus boundary by bridging campus grids into a regional grid, and can even be used to integrate resources from a national cyberinfrastructure such as the Open Science Grid. This paper will highlight 18 months of operational experiences creating campus grids in the US, and the different campus configurations that have successfully utilized the campus grid infrastructure.

  15. Additional Research Needs to Support the GENII Biosphere Models

    SciTech Connect

    Napier, Bruce A.; Snyder, Sandra F.; Arimescu, Carmen

    2013-11-30

    In the course of evaluating the current parameter needs for the GENII Version 2 code (Snyder et al. 2013), areas of possible improvement for both the data and the underlying models have been identified. As the data review was implemented, PNNL staff identified areas where the models can be improved both to accommodate the locally significant pathways identified and also to incorporate newer models. The areas are general data needs for the existing models and improved formulations for the pathway models. It is recommended that priorities be set by NRC staff to guide selection of the most useful improvements in a cost-effective manner. Suggestions are made based on relatively easy and inexpensive changes, and longer-term more costly studies. In the short term, there are several improved model formulations that could be applied to the GENII suite of codes to make them more generally useful. • Implementation of the separation of the translocation and weathering processes • Implementation of an improved model for carbon-14 from non-atmospheric sources • Implementation of radon exposure pathways models • Development of a KML processor for the output report generator module data that are calculated on a grid that could be superimposed upon digital maps for easier presentation and display • Implementation of marine mammal models (manatees, seals, walrus, whales, etc.). Data needs in the longer term require extensive (and potentially expensive) research. Before picking any one radionuclide or food type, NRC staff should perform an in-house review of current and anticipated environmental analyses to select “dominant” radionuclides of interest to allow setting of cost-effective priorities for radionuclide- and pathway-specific research. These include • soil-to-plant uptake studies for oranges and other citrus fruits, and • Development of models for evaluation of radionuclide concentration in highly-processed foods such as oils and sugars. Finally, renewed

  16. Taking Triple Aim at the Triple Aim.

    PubMed

    Bryan, Stirling; Donaldson, Cam

    2016-01-01

    Since its introduction to the USA, the Triple Aim is now being adopted in the healthcare systems of other advanced economies. Verma and Bhatia (2016) (V&B) argue that provincial governments in Canada now need to step up to the plate and lead on the implementation of a Triple Aim reform program here. Their proposals are wide ranging and ambitious, looking for governments to act as the "integrators" within the healthcare system, and lead the reforms. Our view is that, as a vision and set of goals for the healthcare system, the Triple Aim is all well and good, but as a pathway for system reform, as articulated by V&B, it misses the mark in at least three important respects. First, the emphasis on improvement driven by performance measurement and pay-for-performance is troubling and flies in the face of emerging evidence. Second, we know that scarcity can be recognized and managed, even in politically complex systems, and so we urge the Triple Aim proponents to embrace more fully notions of resource stewardship. Third, if we want to take seriously "population health" goals, we need to think very differently and consider broader health determinants; Triple Aim innovation targeted at healthcare systems will not deliver the goals. PMID:27009583

  17. Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care.

    PubMed

    Esmail, Aneez; Valderas, Jose M; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

    2015-09-01

    This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009-2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement. PMID:26339828

  18. Achieving the "triple aim" for inborn errors of metabolism: a review of challenges to outcomes research and presentation of a new practice-based evidence framework.

    PubMed

    Potter, Beth K; Chakraborty, Pranesh; Kronick, Jonathan B; Wilson, Kumanan; Coyle, Doug; Feigenbaum, Annette; Geraghty, Michael T; Karaceper, Maria D; Little, Julian; Mhanni, Aizeddin; Mitchell, John J; Siriwardena, Komudi; Wilson, Brenda J; Syrowatka, Ania

    2013-06-01

    Across all areas of health care, decision makers are in pursuit of what Berwick and colleagues have called the "triple aim": improving patient experiences with care, improving health outcomes, and managing health system impacts. This is challenging in a rare disease context, as exemplified by inborn errors of metabolism. There is a need for evaluative outcomes research to support effective and appropriate care for inborn errors of metabolism. We suggest that such research should consider interventions at both the level of the health system (e.g., early detection through newborn screening, programs to provide access to treatments) and the level of individual patient care (e.g., orphan drugs, medical foods). We have developed a practice-based evidence framework to guide outcomes research for inborn errors of metabolism. Focusing on outcomes across the triple aim, this framework integrates three priority themes: tailoring care in the context of clinical heterogeneity; a shift from "urgent care" to "opportunity for improvement"; and the need to evaluate the comparative effectiveness of emerging and established therapies. Guided by the framework, a new Canadian research network has been established to generate knowledge that will inform the design and delivery of health services for patients with inborn errors of metabolism and other rare diseases. PMID:23222662

  19. The FBI Takes Aim at AIM

    ERIC Educational Resources Information Center

    Kanter, Elliot

    1977-01-01

    The events and revelations before and since the arrest of Paul Skyhorse and Richard Mohawk (two American Indian Movement organizers charged with the 1974 murder of a taxi driver at AIM Camp 13) lead to the inevitable conclusion that these men are victims of a frame-up. (Author/JC)

  20. Precision disablement aiming system

    DOEpatents

    Monda, Mark J.; Hobart, Clinton G.; Gladwell, Thomas Scott

    2016-02-16

    A disrupter to a target may be precisely aimed by positioning a radiation source to direct radiation towards the target, and a detector is positioned to detect radiation that passes through the target. An aiming device is positioned between the radiation source and the target, wherein a mechanical feature of the aiming device is superimposed on the target in a captured radiographic image. The location of the aiming device in the radiographic image is used to aim a disrupter towards the target.

  1. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  2. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  3. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  4. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  5. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  6. Precision laser aiming system

    SciTech Connect

    Ahrens, Brandon R.; Todd, Steven N.

    2009-04-28

    A precision laser aiming system comprises a disrupter tool, a reflector, and a laser fixture. The disrupter tool, the reflector and the laser fixture are configurable for iterative alignment and aiming toward an explosive device threat. The invention enables a disrupter to be quickly and accurately set up, aligned, and aimed in order to render safe or to disrupt a target from a standoff position.

  7. AIM Spacecraft Instruments

    NASA Video Gallery

    AIM will make simultaneous measurements of the main ingredients needed to form these clouds and will unravel the role of natural factors, such as the solar cycle and meteorology, from the possible ...

  8. Marine research in Greece and the additional Greek marine research centres: Progress and present situation

    NASA Astrophysics Data System (ADS)

    Haritonidis, S.

    1995-03-01

    Greece, as is known, has a coastline of 17 000 km, and over 2000 small and large islands. As expected, the quest of humankind for new sources of matter and energy has been focussed on the sea, with fishery being its primary interest. A number of philosophers and scientists have been involved in the study of this vast ecosystem since ancient times (Aristotle). The political, social and geographical upheavals witnessed in the Greek area, have, however resulted in bringing all these activities to a halt. The first contemporary research work commenced at the end of the 18th century/beginning of the 19th — with marine flora and fauna as its starting point. The first investigations had, of course, been limited to random collections of marine material done in the frame of international exploratory expeditions. Studies became more systematic by the end of the 19th and beginning of the 20th century, with priority being given to the animal kingdom (fish, molluscs, etc.). Investigation of the marine phytobenthos (macrophyceae, phytoplankton) was to follow. The past 40 years research has been more extensive, not limited only to biogeographical evaluations, but also having expanded to physiological and ecological levels. The relevant institutes of Greek universities have all the while watched and contributed to this effort. Today, this kind of research is being supported by the N.M.R.C., the Center of Marine Research, University of Crete, and two research boats which sail the Greek seas. In the ever-changing world, the study of marine flora and fauna has certainly made great progress; however, there are still two big problems to be faced. The first deals with increasing pollution of the seas, the second, with the difficulties in finding and affording adequate financial resources that would enable a more detailed and complete execution of this research work.

  9. 40 CFR 26.304 - Additional protections for pregnant women and fetuses involved in observational research.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... research. The provisions of 45 CFR 46.204 are applicable to this section. ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Additional protections for pregnant... Protections for Pregnant Women and Fetuses Involved as Subjects in Observational Research Conducted...

  10. AIM for the BESt: Assessment and Intervention Model for the Bilingual Exceptional Student. A Handbook for Teachers and Planners from the Innovative Approaches Research Project.

    ERIC Educational Resources Information Center

    Ortiz, Alba A.; And Others

    This handbook describes the Assessment and Intervention Model for the Bilingual Exceptional Student (AIM for the BESt), an instructional/intervention approach to the education of language minority students. The model aims to improve academic performance through use of shared literature and Graves writing workshops, reduce inappropriate referrals…

  11. Thinking Big, Aiming High

    ERIC Educational Resources Information Center

    Berkeley, Viv

    2010-01-01

    What do teachers, providers and policymakers need to do in order to support disabled learners to "think big and aim high"? That was the question put to delegates at NIACE's annual disability conference. Some clear themes emerged, with delegates raising concerns about funding, teacher training, partnership-working and employment for disabled…

  12. The Attitudes of Females in Drug Court Toward Additional Safeguards in HIV Prevention Research

    PubMed Central

    O’Leary, Catina Callahan; Cottler, Linda B.

    2010-01-01

    This article examines the attitudes of 97 women from the St. Louis City Drug Court who previously participated in an HIV prevention study. Data from the previous study indicated that the women met multiple criteria for vulnerability in research. Federal regulations require that such participants be provided with “additional safeguards.” The survey explored the following questions: (1) What are participants’ attitudes toward commonly proposed additional safeguards for vulnerable participants in research, and (2) Are attitudes toward safeguards related to participants’ previous compliance with an HIV prevention protocol? Preferences regarding safeguards in research were not significantly related to participants’ compliance in the previous study. Most participants wanted researchers to take extra measures not only to provide consent information, but to ensure that they are not high on drugs, that they understand relevant information, and that they retain consent information at each visit. Most participants wanted researchers themselves, and not a third party, to assume this responsibility. PMID:19452277

  13. Biocomputing - tools, aims, perspectives.

    PubMed

    Katz, Evgeny

    2015-08-01

    Biomolecular systems for information processing have recently received great attention in the general framework of unconventional computing. While DNA biocomputing systems have been studied by many researchers and have already reached a high level of complexity, enzyme-based cascades mimicking Boolean logic operations are a relatively new subfield that is rapidly progressing. The present paper reviews recent progress in the enzyme-based information processing systems and suggests applications in biosensing, rather than computation. Specific examples of enzyme-based logic systems are discussed to introduce readers to this rapidly developing research area. PMID:25765672

  14. The Research Biobank of the Year Competition of the European, Middle Eastern and African Society for Biopreservation and Biobanking (ESBB): aims and achievements.

    PubMed

    Schröder, Christina; Corfield, Julie; di Donato, Jeanne-Hélène; Meir, Karen; Parodi, Barbara; Schmitz, Arndt A; Tiran, Andreas; Tybring, Gunnel; Hewitt, Robert E

    2014-04-01

    With the increasing number of research biobanks and the importance of their role in supporting medical and biological research, the development and sharing of biobanking best practices and benchmarking standards has become paramount. To promote outstanding biobank services for research, the Research Biobank of the Year Competition (RBYC) has been inaugurated by the European, Middle-Eastern, and African Society for Biopreservation and Biobanking (ESBB) in October 2013. The procedures for the call and evaluation procedure, including the newly developed scoring system, are presented here. The statistics and evaluation results of the first year's applications, as well as the experiences of the jury are reported here, and improvements for the RBYC in subsequent years are proposed. Beyond offering a unique benchmarking opportunity for biobanks, the RBYC is discussed as a novel tool to enhance biobank quality, transparency, usage, connectivity, innovation, and sustainability. PMID:24749884

  15. Cancer Control Research Training for Native Researchers: A Model for Development of Additional Native Researcher Training Programs

    ERIC Educational Resources Information Center

    Becker, Thomas M.; Dunn, Esther; Tom-Orme, Lillian; Joe, Jennie

    2005-01-01

    Several social and biological scientists who have Native status are engaged in productive research careers, but the encouragement that has been offered to Native students to formulate career goals devoted to cancer etiology or cancer control in Native peoples has had limited success. Hence, the Native Researchers' Cancer Control Training Program…

  16. A Review of Research on the Literacy of Students with Visual Impairments and Additional Disabilities

    ERIC Educational Resources Information Center

    Parker, Amy T.; Pogrund, Rona L.

    2009-01-01

    Research on the development of literacy in children with visual impairments and additional disabilities is minimal even though these children make up approximately 65% of the population of children with visual impairments. This article reports on emerging themes that were explored after a review of the literature revealed nine literacy studies…

  17. Using Formative Research to Develop a Nutrition Education Resource Aimed at Assisting Low-Income Households in South Africa Adopt a Healthier Diet

    ERIC Educational Resources Information Center

    Everett-Murphy, K.; De Villiers, A.; Ketterer, E.; Steyn, K.

    2015-01-01

    As part of a comprehensive programme to prevent non-communicable disease in South Africa, there is a need to develop public education campaigns on healthy eating. Urban populations of lower socioeconomic status are a priority target population. This study involved formative research to guide the development of a nutrition resource appropriate to…

  18. Using formative research to develop a nutrition education resource aimed at assisting low-income households in South Africa adopt a healthier diet.

    PubMed

    Everett-Murphy, K; De Villiers, A; Ketterer, E; Steyn, K

    2015-12-01

    As part of a comprehensive programme to prevent non-communicable disease in South Africa, there is a need to develop public education campaigns on healthy eating. Urban populations of lower socioeconomic status are a priority target population. This study involved formative research to guide the development of a nutrition resource appropriate to the budgetary constraints and information needs of poor households in the major urban centres of South Africa. Twenty-two focus groups were convened to explore the target audience's knowledge, beliefs, attitudes and practices as they related to healthy eating and their views about the proposed nutrition resource (N = 167). A brief questionnaire assessed eating and cooking practices among focus group participants. Key informant interviews with eight dieticians/nutritionists working with this population added to the focus group findings. The research identified important issues to take into account in the development of the resource. These included the need to: directly address prevalent misconceptions about healthy eating and unhealthy eating practices; increase self-efficacy regarding the purchasing and preparation of healthy food; represent diverse cultural traditions and consider the issues of affordability and availability of food ingredients. This study demonstrates the value of using formative research in the design of nutrition-related communication in a multicultural, poor, urban South African setting. PMID:26590241

  19. Ecological studies of disturbed landscapes: a compendium of the results of five years of research aimed at the restoration of disturbed ecosystems

    SciTech Connect

    Dvorak, A.J.

    1984-09-01

    Results of a research program which investigates some of the fundamental environmental questions associated with coal extraction as part of DOE's broad mission to understand the environmental consequences of energy development are described. This document summarizes that program. The report is divided into 12 chapters which cover topics including revegetation of disturbed land in arid ecosystems; microbial ecology and nutrient cycling; amelioration of acid waste materials; effects of mining on watershed hydrology and water quality; etc. Each chapter has been separately indexed and is included in the EDB. (MDF)

  20. Improving Aboriginal maternal and infant health services in the ‘Top End’ of Australia; synthesis of the findings of a health services research program aimed at engaging stakeholders, developing research capacity and embedding change

    PubMed Central

    2014-01-01

    Background Health services research is a well-articulated research methodology and can be a powerful vehicle to implement sustainable health service reform. This paper presents a summary of a five-year collaborative program between stakeholders and researchers that led to sustainable improvements in the maternity services for remote-dwelling Aboriginal women and their infants in the Top End (TE) of Australia. Methods A mixed-methods health services research program of work was designed, using a participatory approach. The study area consisted of two large remote Aboriginal communities in the Top End of Australia and the hospital in the regional centre (RC) that provided birth and tertiary care for these communities. The stakeholders included consumers, midwives, doctors, nurses, Aboriginal Health Workers (AHW), managers, policy makers and support staff. Data were sourced from: hospital and health centre records; perinatal data sets and costing data sets; observations of maternal and infant health service delivery and parenting styles; formal and informal interviews with providers and women and focus groups. Studies examined: indicator sets that identify best care, the impact of quality of care and remoteness on health outcomes, discrepancies in the birth counts in a range of different data sets and ethnographic studies of ‘out of hospital’ or health centre birth and parenting. A new model of maternity care was introduced by the health service aiming to improve care following the findings of our research. Some of these improvements introduced during the five-year research program of research were evaluated. Results Cost effective improvements were made to the acceptability, quality and outcomes of maternity care. However, our synthesis identified system-wide problems that still account for poor quality of infant services, specifically, unacceptable standards of infant care and parent support, no apparent relationship between volume and acuity of presentations

  1. Research on the Technology Applying Anti-Rutting Additive to Asphalt Mixture

    NASA Astrophysics Data System (ADS)

    Sun, Jie; Huang, Liming; Li, Chun

    High-temperature problems like rutting, displacement and upheaval are the most serious ones for bituminous pavement of urban roads. Especially, such problems at crossroads and fixed places where buses stop, for instance, BRT, affect service ability and life of roads largely. Application of anti-rutting asphalt mixture mainly aims at reducing strain and deformation generated by bituminous concrete under effect of vehicle load, decreasing remainders that cannot be recovered in deformation, improving the ability of bituminous pavement to resist deformation under high temperature and delaying generation of rutting. Anti-rutting asphalt mixture in this thesis refers to the asphalt mixture where anti-rutting additive is added by dry method and high-temperature stability is improved.

  2. Turbulent Drag Reduction with Surfactant Additives — Basic Research and Application to an Air Conditioning System

    NASA Astrophysics Data System (ADS)

    Kawaguchi, Y.; Li, F. C.; Yu, B.; Wei, J. J.

    It is well known that a small amount of chemicals such as water-soluble polymers or surfactants dramatically suppresses turbulence when they are added to liquid flow at large Reynolds number. In the last two decades, the application of surfactants to heat transportation systems such as district heating and cooling systems has attracted much interest among researchers. It has been revealed that 70% of the pumping power used to drive hot water in primary pipelines or district heating systems was saved by adding only a few hundred ppm of surfactant into the circulating water. The technological achievement requires a new design strategy for pipeline networks and heat exchangers to handle the drag reducing liquid flow. In the case of a Newtonian fluid such as water or air, the knowledge for designing fluid systems has been accumulated and the accuracy of numerical prediction is sufficient. On the other hand, the design system for surfactant solutions is not mature because drag-reducing flow phenomena are much more complicated than for Newtonian flow, for example, the friction factor for a surfactant solution depends not only on Reynolds number but also pipe diameter. In order to provide a design strategy for heat transportation systems using surfactant additives, we are now carrying out both experimental and numerical studies for surfactant solutions. In this lecture, experimental and numerical studies on the turbulence structure in drag reducing flow will be introduced. The result of an application study relating to the air conditioning system will be also shown.

  3. PowerPoint Presentations: A Creative Addition to the Research Process.

    ERIC Educational Resources Information Center

    Perry, Alan E.

    2003-01-01

    Contends that the requirement of a PowerPoint presentation as part of the research process would benefit students in the following ways: learning how to conduct research; starting their research project sooner; honing presentation and public speaking skills; improving cooperative and social skills; and enhancing technology skills. Outlines the…

  4. Statement Summarizing Research Findings on the Issue of the Relationship Between Food-Additive-Free Diets and Hyperkinesis in Children.

    ERIC Educational Resources Information Center

    Lipton, Morris; Wender, Esther

    The National Advisory Committee on Hyperkinesis and Food Additives paper summarized some research findings on the issue of the relationship between food-additive-free diets and hyperkinesis in children. Based on several challenge studies, it is concluded that the evidence generally refutes Dr. B. F. Feingold's claim that artificial colorings in…

  5. 75 FR 34277 - Federal Acquisition Regulation; FAR Case 2008-007, Additional Requirements for Market Research

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-16

    ... Research AGENCIES: Department of Defense (DoD), General Services Administration (GSA), and National... executive agencies. Specifically, the head of the agency must conduct market research before issuing an... million for the procurement of items other than commercial items is required to conduct market...

  6. Additional flow quality measurements in the Langley Research Center 8-Foot Transonic Pressure Tunnel

    NASA Technical Reports Server (NTRS)

    Brooks, J. D.; Stainback, P. C.; Brooks, C. W., Jr.

    1980-01-01

    Additional tests were conducted to further define the disturbance characteristics of the Langley 8-Foot Transonic Pressure Tunnel. Measurements were made in the settling chamber with hot wire probes and in the test section with pressure transducers when various methods were used to choke the flow. In addition to presenting rms values measured at various locations and tunnel condition, autocorrelations and cross correlation data are also presented.

  7. Defining an additivity framework for mixture research in inducible whole-cell biosensors

    NASA Astrophysics Data System (ADS)

    Martin-Betancor, K.; Ritz, C.; Fernández-Piñas, F.; Leganés, F.; Rodea-Palomares, I.

    2015-11-01

    A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts for differential maximal effects among analytes and response inhibition beyond the maximum permissive concentrations. This allows a multivariate extension of Loewe additivity, enabling direct application in a biphasic dose-response framework. The proposed additivity definition was validated, and its applicability illustrated by studying the response of the cyanobacterial biosensor Synechococcus elongatus PCC 7942 pBG2120 to binary mixtures of Zn, Cu, Cd, Ag, Co and Hg. The novel method allowed by the first time to model complete dose-response profiles of an inducible whole cell biosensor to mixtures. In addition, the approach also allowed identification and quantification of departures from additivity (interactions) among analytes. The biosensor was found to respond in a near additive way to heavy metal mixtures except when Hg, Co and Ag were present, in which case strong interactions occurred. The method is a useful contribution for the whole cell biosensors discipline and related areas allowing to perform appropriate assessment of mixture effects in non-monotonic dose-response frameworks

  8. Defining an additivity framework for mixture research in inducible whole-cell biosensors.

    PubMed

    Martin-Betancor, K; Ritz, C; Fernández-Piñas, F; Leganés, F; Rodea-Palomares, I

    2015-01-01

    A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts for differential maximal effects among analytes and response inhibition beyond the maximum permissive concentrations. This allows a multivariate extension of Loewe additivity, enabling direct application in a biphasic dose-response framework. The proposed additivity definition was validated, and its applicability illustrated by studying the response of the cyanobacterial biosensor Synechococcus elongatus PCC 7942 pBG2120 to binary mixtures of Zn, Cu, Cd, Ag, Co and Hg. The novel method allowed by the first time to model complete dose-response profiles of an inducible whole cell biosensor to mixtures. In addition, the approach also allowed identification and quantification of departures from additivity (interactions) among analytes. The biosensor was found to respond in a near additive way to heavy metal mixtures except when Hg, Co and Ag were present, in which case strong interactions occurred. The method is a useful contribution for the whole cell biosensors discipline and related areas allowing to perform appropriate assessment of mixture effects in non-monotonic dose-response frameworks. PMID:26606975

  9. Defining an additivity framework for mixture research in inducible whole-cell biosensors

    PubMed Central

    Martin-Betancor, K.; Ritz, C.; Fernández-Piñas, F.; Leganés, F.; Rodea-Palomares, I.

    2015-01-01

    A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts for differential maximal effects among analytes and response inhibition beyond the maximum permissive concentrations. This allows a multivariate extension of Loewe additivity, enabling direct application in a biphasic dose-response framework. The proposed additivity definition was validated, and its applicability illustrated by studying the response of the cyanobacterial biosensor Synechococcus elongatus PCC 7942 pBG2120 to binary mixtures of Zn, Cu, Cd, Ag, Co and Hg. The novel method allowed by the first time to model complete dose-response profiles of an inducible whole cell biosensor to mixtures. In addition, the approach also allowed identification and quantification of departures from additivity (interactions) among analytes. The biosensor was found to respond in a near additive way to heavy metal mixtures except when Hg, Co and Ag were present, in which case strong interactions occurred. The method is a useful contribution for the whole cell biosensors discipline and related areas allowing to perform appropriate assessment of mixture effects in non-monotonic dose-response frameworks PMID:26606975

  10. The Asteroid Impact Mission (AIM)

    NASA Astrophysics Data System (ADS)

    Küppers, M.; Carnelli, I.; Galvez, A.; Mellab, K.; Michel, P.; AIM Team

    2015-10-01

    The Asteroid Impact Mission (AIM) is ESA's contribution to an international cooperation targeting the demonstration of deflection of a hazardous nearearth asteroid as well as the first in-depth investigation of a binary asteroid. After launch in 2020, AIM will rendezvous the binary near-Earth asteroid (65803) Didymos in 2022 and observe the system before, during, and after the impact of NASA's Double Asteroid Redirection Test (DART) spacecraft. The AIM mission will test new technologies like optical telecommunications by laser and Cubesats with nano-payloads and will perform scientific measurements at the asteroid system.

  11. Animation of the AIM Spacecraft

    NASA Video Gallery

    AIM will make simultaneous measurements of the main ingredients needed to form these clouds and will unravel the role of natural factors, such as the solar cycle and meteorology, from the possible ...

  12. Changes to English as an Additional Language Writers' Research Articles: From Spoken to Written Register

    ERIC Educational Resources Information Center

    Koyalan, Aylin; Mumford, Simon

    2011-01-01

    The process of writing journal articles is increasingly being seen as a collaborative process, especially where the authors are English as an Additional Language (EAL) academics. This study examines the changes made in terms of register to EAL writers' journal articles by a native-speaker writing centre advisor at a private university in Turkey.…

  13. The Aims of College Teaching.

    ERIC Educational Resources Information Center

    Eble, Kenneth E.

    The aims of college teaching are discussed, and a comparison of higher education in 1960 and two decades later is provided. After considering the development of a teaching style and the importance of the teacher's character, the joyful and spontaneous side of teaching are considered. The nature of teaching (i.e., art, science, or craft) is also…

  14. AIME Copyright Information Packet. Revised.

    ERIC Educational Resources Information Center

    Association for Information Media and Equipment, Elkader, IA.

    Designed to assist educators in developing or revising school/library copyright policy, this packet provides the following materials: (1) a viewer's guide for the film "Copyright Law: What Every School, College, and Public Library Should Know"; (2) a statement of the primary missions of the Association for Information Media and Equipment (AIME);…

  15. Differentiation and Standardization of Aims.

    ERIC Educational Resources Information Center

    Stake, Robert

    For many people, school reform means taking the responsibility for goal setting away from teachers and assessing common student accomplishments, but the costs and benefits of this accountability strategy have not been determined. The difference between the aims of education represented by test scores, and those represented by the activities of the…

  16. Greek research reactor performance characteristics after addition of beryllium reflector and LEU fuel

    SciTech Connect

    Deen, J.R.; Snelgrove, J.L.; Papastergiou, C.

    1992-12-31

    The GRR-1 is a 5-MW pool-type, light-water-moderated and-cooled reactor fueled with MTR-type fuel elements. Recently received Be reflector blocks will soon be added to the core to add additional reactivity until fresh LEU fuel arrives. REBUS-3 xy fuel cycle analyses, using burnup dependent cross sections, were performed to assist in fuel management decisions for the water- and Be-reflected HEU nonequilibrium cores. Cross sections generated by EPRI-CELL have been benchmarked to identical VIM Monte Carlo models. The size of the Be-reflected LEU core has been reduced to 30 elements compared to 35 for the HEU water-reflected core, and an equilibrium cycle calculation has been performed.

  17. Greek research reactor performance characteristics after addition of beryllium reflector and LEU fuel

    SciTech Connect

    Deen, J.R.; Snelgrove, J.L. ); Papastergiou, C. )

    1992-01-01

    The GRR-1 is a 5-MW pool-type, light-water-moderated and-cooled reactor fueled with MTR-type fuel elements. Recently received Be reflector blocks will soon be added to the core to add additional reactivity until fresh LEU fuel arrives. REBUS-3 xy fuel cycle analyses, using burnup dependent cross sections, were performed to assist in fuel management decisions for the water- and Be-reflected HEU nonequilibrium cores. Cross sections generated by EPRI-CELL have been benchmarked to identical VIM Monte Carlo models. The size of the Be-reflected LEU core has been reduced to 30 elements compared to 35 for the HEU water-reflected core, and an equilibrium cycle calculation has been performed.

  18. Literacy and Children Who Are Blind and Who Have Additional Disabilities--the Challenges for Teachers and Researchers.

    ERIC Educational Resources Information Center

    McCall, Steve; McLinden, Mike

    2001-01-01

    This article describes an innovative action research project based at the University of Birmingham in the United Kingdom that involved the professional development of teachers and instruction using specially developed Moon tactile code materials to teach literacy to pupils who are blind and who have additional disabilities. (Contains references.)…

  19. China's educational aim and theory

    NASA Astrophysics Data System (ADS)

    Guang-Wei, Zou

    1985-12-01

    The aim and theory of Chinese socialist education is to provide scientific and technological knowledge so as to develop the productive forces and to meet the demands of the socialist cause. Since education is the main vehicle towards modernizing science and technology, any investment in education is viewed as being productive as it feeds directly into economics. Faced with the demands of industrial and agricultural production, training a technical as well as a labour force becomes crucial. This is made possible by the provision of two labour systems for workers both from rural as well as urban areas and by two kinds of educational systems for both urban and rural students. Chinese educational theory is seen as a fusion of principles from its own educational legacy with those of Marxist-Leninist principles.

  20. Jiangsu aims at quality services.

    PubMed

    1996-04-01

    This news brief discusses population growth and achievements in family planning in one of China's most economically developed provinces, Jiangsu. During the Five-Year Plan of 1991-95, population growth was controlled sufficiently to result in 300,000 births averted due to improvement in family planning. Provincial leaders and family planning workers agree that modernization may be achieved by the year 2000 by shifting the emphasis of family planning to economic development. The provincial government plans to offer a comprehensive package of contraceptive and reproductive health services to women of childbearing age. An information management system is planned for Taicang City. The aim is to show underdeveloped areas of the province the successful family planning experiences in Yancheng City. The Jiangsu government has a standardized management system that allows for the delivery of information and technical services and an improved supply of contraceptives. Over 95% of towns and service rooms had family planning service stations and population schools in 1995. Over 60% of villages had branch schools that provided family planning information and services. A public media campaign is planned that would spread information on childbirth, contraception, and reproductive health. This system would link IEC between the province, counties, and townships and facilitate delivery of services. Each county must establish an information management system for population and family planning. PMID:12347496

  1. Implementation of an Anesthesia Information Management System (AIMS)

    PubMed Central

    Douglas, James R.; Ritter, Melody J.

    2011-01-01

    During the administration of anesthesia, the anesthesia provider has historically created a paper record, charted manually, that included extensive patient care–related data (vital signs, other parameters, etc) and commentaries. DocuSys, a proprietary anesthesia information management system (AIMS), creates an electronic version of the anesthesia record and provides additional information. It electronically captures data from clinical monitors and other sources, including scheduling applications and laboratory computers. The AIMS facilitates chart entries such as drug doses and case narratives. Benefits of an AIMS include improved legibility of the anesthesia record and greater efficiency in documentation efforts. Use of the AIMS assists the practitioner with decision support logic, such as the timing of antibiotic administration and the inclusion of legally required documentation. Upon case completion, the AIMS data are immediately available to other information systems, such as billing and medical records. Data can be made available from a single case or, more important, from thousands of cases to analyze variables such as efficiency of services, adherence to best practices, patient outcomes, and clinical research. The AIMS was deployed at the main campus of the Ochsner Health System on March 26, 2009. In this article, we discuss the issues involved in the AIMS implementation process: the successes, surprises, and continued challenges. PMID:21734847

  2. Advanced Industrial Materials (AIM) fellowship program

    SciTech Connect

    McCleary, D.D.

    1997-04-01

    The Advanced Industrial Materials (AIM) Program administers a Graduate Fellowship Program focused toward helping students who are currently under represented in the nation`s pool of scientists and engineers, enter and complete advanced degree programs. The objectives of the program are to: (1) establish and maintain cooperative linkages between DOE and professors at universities with graduate programs leading toward degrees or with degree options in Materials Science, Materials Engineering, Metallurgical Engineering, and Ceramic Engineering, the disciplines most closely related to the AIM Program at Oak Ridge National Laboratory (ORNL); (2) strengthen the capabilities and increase the level of participation of currently under represented groups in master`s degree programs, and (3) offer graduate students an opportunity for practical research experience related to their thesis topic through the three-month research assignment or practicum at ORNL. The program is administered by the Oak Ridge Institute for Science and Education (ORISE).

  3. Pursuing the Triple Aim: The First 7 Years

    PubMed Central

    Whittington, John W; Nolan, Kevin; Lewis, Ninon; Torres, Trissa

    2015-01-01

    Context In 2008, researchers at the Institute for Healthcare Improvement (IHI) described the Triple Aim as simultaneously “improving the individual experience of care; improving the health of populations; and reducing the per capita costs of care for populations.” IHI and its close colleagues had determined that both individual and societal changes were needed. Methods In 2007, IHI began recruiting organizations from around the world to participate in a collaborative to implement what became known as the Triple Aim. The 141 participating organizations included health care systems, hospitals, health care insurance companies, and others closely tied to health care. In addition, key groups outside the health care system were represented, such as public health agencies, social services groups, and community coalitions. This collaborative provided a structure for observational research. By noting the contrasts between the contexts and structures of those sites in the collaborative that progressed and those that did not, we were able to develop an ex post theory of what is needed for an organization or community to successfully pursue the Triple Aim. Findings Drawing on our 7 years of experience, we describe the 3 major principles that guided the organizations and communities working on the Triple Aim: creating the right foundation for population management, managing services at scale for the population, and establishing a learning system to drive and sustain the work over time. Conclusions The concept of the Triple Aim is now widely used, because of IHI's work with many organizations and also because of the adoption of the Triple Aim as part of the national strategy for US health care, developed during the implementation of the Patient Protection and Affordable Care Act of 2010. Even those organizations working on the Triple Aim before IHI coined the term found our concept to be useful because it helped them think about all 3 dimensions at once and organize their

  4. Less is often more, but not always: additional evidence that familiarity breeds contempt and a call for future research.

    PubMed

    Norton, Michael I; Frost, Jeana H; Ariely, Dan

    2013-12-01

    Ullrich, Krueger, Brod, and Groschupf (2013)-using a replication of the trait paradigm from Norton, Frost, and Ariely (2007)-suggest that less information does not always equal greater liking. We first ground the current debate in a larger historical debate in social psychology regarding the merits of configural versus algebraic models of person perception. We next review (a) related research that has suggested that more information can in some cases lead to more liking and (b) a large body of "real world" data-from friendships, daters, married couples, employment, celebrities, and politics-that suggests that more information often leads to less liking. We then provide an additional replication of our "less is more" effect, using a slight variation of the trait-list paradigm. The existing data suggest a need for further integrative explorations of when familiarity leads to contempt or liking or has no effect. PMID:24295381

  5. Insect food aiming at Mars emigration

    NASA Astrophysics Data System (ADS)

    Katayama, Naomi; Yamashita, Masamichi; Hashimoto, Hirofumi; Nagasaka, Sanako; Kuwayama, Akemi; Sofue, Megumi

    2012-07-01

    We study insect food aiming at Mars emigration.In space agriculture, insect is the important creature which we cannot miss.It is necessary for the pollination of the plant, and it is rich to protein and lipid as food.I reported that silkworm is an insect necessary for astroponics in particular last time.We make clothes using silk thread, and the pupa becomes the food.In addition, the clothes can make food as protein when we need not to use it. The bee is a very important insect in the space agriculture,too.We examined nutrition of silkworm, bee, grasshopper, snail and the white ant which are necessary for Mars emigration.We will introduce of good balance space foods.We will report many meal menu for Mars emigration.

  6. Automated Diagnosis Of Faults In Antenna-Aiming Systems

    NASA Technical Reports Server (NTRS)

    Smyth, Patrick J.; Mellstrom, Jeffrey A.

    1993-01-01

    Report discusses research directed toward automated diagnosis of faults in complicated electromechanical and hydraulic systems aiming 70-m and 34-m antennas of Deep Space Network communication system.

  7. SWIR detectors for night vision at AIM

    NASA Astrophysics Data System (ADS)

    Figgemeier, H.; Benecke, M.; Hofmann, K.; Oelmaier, R.; Sieck, A.; Wendler, J.; Ziegler, J.

    2014-06-01

    Detectors for the short-wave infrared (SWIR) spectral range are particularly suitable for observation under hazy weather conditions as well as under twilight or moon light conditions. In addition, SWIR detectors allow using the airglow for observation under moonless sky. SWIR detectors are commonly based on InGaAs or HgCdTe (MCT) and demand extremely low dark currents to ensure a high signal-to-noise ratio under low background light conditions. AIM has developed a read-out integrated circuit (ROIC) with 640×512 pixels and a 15 μm pixel pitch for low light level applications. The ROIC supports analog or digital correlated double sampling (CDS) for the reduction of reset-noise (also known as kTC-noise). Along with CDS, a rolling shutter (RS) mode has been implemented. The input stage of the ROIC is based on a capacitive transimpedance amplifier (CTIA) with two selectable gain settings. The dark current of our SWIR MCT detectors has recently been significantly reduced to allow for high operating temperatures. In contrast to InGaAs, the MCT material offers the unique possibility to adjust the cut-off wavelength according to the application while maintaining the matching of the lattice constant to the one of the CdZnTe substrate. The key electro-optical performance parameters of lately developed MCT based SWIR Focal Plane Arrays (FPA) with a 1.75 μm cut-off wavelength will be presented. In addition, AIMs SWIR detectors covering the spectral range from 0.9 μm to 2.5 μm and available in formats of 384×288 pixels - 24 μm pitch and 1024×256 pixels - 24×32 μm2, will be introduced.

  8. Taking aim at novel vaccines market.

    PubMed

    Awasthi, Sita

    2009-10-01

    The World Vaccine Congress Washington 2009 was held in Chantilly, VA USA April 2O -23rd. The Vaccine congress attracted over 400 participants from across the world, including leading vaccine manufacturers, biotechs, governmental agencies, NGOs, research and academic institutes, venture capital and legal firms, contract service and equipment manufacturers. The speakers covered a wide range of topics, including the role of government and regulatory agencies, funding availability, research and development, manufacturing, packaging and post vaccine evaluations. Past vaccine development efforts have historically focused on infectious diseases. With advancements in the field of immunology, molecular biology and vaccinology, the vaccine field has begun moving in new directions. "Taking aim at novel vaccines market" session chaired by Dr. Una Ryan, Chief Executive Officer of Waltham Technologies, was focused on traditional approaches to novel targets (nosocomial infections), novel approaches to traditional targets (flu and rabies), novel approaches to novel targets (Type 1 diabetes, multiple sclerosis and smoking) and vaccines for developing markets (TB, malaria, rabies). The importance of collaborations among academic institutions, industries, and philanthropic foundations for developing markets was also emphasized. PMID:19855156

  9. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... project are likely to be used by other research projects or programs with similar objectives. (c... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education... evaluates an application for a research project, study, or survey on the basis of the criteria in...

  10. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... project are likely to be used by other research projects or programs with similar objectives. (c... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education... evaluates an application for a research project, study, or survey on the basis of the criteria in...

  11. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... project are likely to be used by other research projects or programs with similar objectives. (c... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education... evaluates an application for a research project, study, or survey on the basis of the criteria in...

  12. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the proposed teaching, testing, and research methodology; and (2) The size, scope, and duration of the... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education..., DEPARTMENT OF EDUCATION THE INTERNATIONAL RESEARCH AND STUDIES PROGRAM How Does the Secretary Make a...

  13. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the proposed teaching, testing, and research methodology; and (2) The size, scope, and duration of the... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education..., DEPARTMENT OF EDUCATION THE INTERNATIONAL RESEARCH AND STUDIES PROGRAM How Does the Secretary Make a...

  14. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response. PMID:26615870

  15. Piloting the Post-Entry Language Assessment: Outcomes from a New System for Supporting Research Candidates with English as an Additional Language

    ERIC Educational Resources Information Center

    Tynan, Liz; Johns, Kellie

    2015-01-01

    The Post-Entry Language Assessment (PELA) was introduced by the James Cook University Graduate Research School in February 2013 as a pilot programme to test a new mechanism for initiating post-enrolment support for research degree candidates who have English as an additional language. Language ability does not necessarily, on its own, predict…

  16. Neutralization of acid mine drainage influenced lakes by organic additions. Final research report, 1 October 1987-31 December 1989

    SciTech Connect

    Brugam, R.B.; Gastineau, J.; Ratcliff, E.; Stevens, A.

    1990-02-01

    The authors conducted a series of 5 experiments in which 1 m diameter and 3 to 6 m long cylindrical enclosures were built in an acidic lake on a coal mine site. The enclosures extended from the lake surface to the sediment. Limestone, phosphate, sewage sludge or wheat straw was added to the enclosures to test their neutralizing capabilities. The theory suggests that sewage sludge and wheat straw should be substrates for sulfate reduction by bacteria and that the production of H2S and its precipitation as FeS should remove sulfuric acid from the water column. The limestone additions raised pH as expected. Straw additions supported sulfate reduction. Sulfate reduction was strongest where both lime and straw were added together. Straw additions produced the expected neutralization in the experiments, but neutralization was not permanent.

  17. English as an Additional Language--A Genealogy of Language-in-Education Policies and Reflections on Research Trajectories

    ERIC Educational Resources Information Center

    Leung, Constant

    2016-01-01

    The school population in England is linguistically diverse; according to official data, over one million pupils do not speak English as their first language. All teachers are expected to support English as an additional language (EAL) development as part of their professional responsibility. At the same time, there has been little specific…

  18. Take AIM and Keep Your Students Engaged

    ERIC Educational Resources Information Center

    Nash, Catherine

    2014-01-01

    This paper outlines the benefits to distance education teachers of formatting a weekly online newsletter in accordance with motivational learning theory. It reflects on the delivery of weekly AIM newsletters to undergraduate economics students at the Open Polytechnic of New Zealand via Moodle. The acronym, AIM, stands for Academic content,…

  19. Aims of education in South Africa

    NASA Astrophysics Data System (ADS)

    Morrow, Walter Eugene

    1990-06-01

    The first part of this paper gives a historical account of the aims of education under Apartheid, and discusses the ideological success of Apartheid education. The second part argues that a significant discussion — that is one which could have some purchase on schooling policy and educational practice — of aims of education in South Africa is not possible at present because the historical preconditions for such a discussion are not satisfied. It is argued that Apartheid has generated a political perspective which is unsympathetic to a discussion of aims of education; that the dominance of a social engineering model of schooling distorts a discussion of aims of education; and that a shared moral discourse, which is a necessary condition for a significant discussion of aims of education, does not yet exist in South Africa.

  20. Found in Translation: Interdisciplinary Arts Integration in Project AIM

    ERIC Educational Resources Information Center

    Pruitt, Lara; Ingram, Debra; Weiss, Cynthia

    2014-01-01

    This paper will share the arts-integration methodology used in Project AIM and address the question; "How is translation evident in interdisciplinary arts instruction, and how does it affect students?" Methods: The staff and researchers from Project AIM, (an arts-integration program of the Center for Community Arts Partnerships at…

  1. Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization.

    PubMed

    Banks, Jim

    2013-01-01

    Having already made a big impact in the medical sector, three-dimensional (3-D) printing technology continues to push the boundaries of cost efficiency, convenience, and customization. It has transformed some aspects of medical device production. However, expectations of the technology are often exaggerated in the media, so we spoke to leading researchers in the field about its practical applications and what can be expected in the near future. PMID:24233187

  2. A synopsis of the Defense Advanced Research Projects Agency (DARPA) investment in additive manufacture and what challenges remain

    NASA Astrophysics Data System (ADS)

    Maher, Michael; Smith, Adrien; Margiotta, Jesse

    2014-03-01

    DARPA's interest in additive manufacture dates back to the mid-80s with seedling programs that developed the foundational knowledge and equipment that led to the Solid Freeform Fabrication program in 1990. The drivers for this program included reducing development times by enabling "tool-less" manufacturing as well as integration of design and fabrication tools. DARPA consistently pushed the boundaries of additive manufacture with follow-on programs that expanded the material suite available for 3-D printing as well as new processes that expanded the technology's capability base. Programs such as the Mesoscopic Integrated Conformal Electronics (MICE) program incorporated functionality to the manufacturing processes through direct write of electronics. DARPA's investment in additive manufacture continues to this day but the focus has changed. DARPA's early investments were focused on developing and demonstrating the technology's capabilities. Now that the technology has been demonstrated, there is serious interest in taking advantage of the attributes unique to the processing methodology (such as customization and new design possibilities) for producing production parts. Accordingly, today's investment at DARPA addresses the systematic barriers to implementation rather than the technology itself. The Open Manufacturing program is enabling rapid qualification of new technologies for the manufacturing environment through the development of new modeling and informatics tools. While the technology is becoming more mainstream, there are plenty of challenges that need to be addressed. And as the technology continues to mature, the agency will continue to look for those "DARPA-hard" challenges that enable revolutionary changes in capability and performance for the Department of Defense.

  3. Animated View of the AIM Mission

    NASA Video Gallery

    The Aeronomy of Ice in the Mesosphere (AIM) mission will provide the first detailed exploration of Earth's unique and elusive noctilucent or night shining clouds that are found literally on the "ed...

  4. News Conference: Serbia hosts teachers' seminar Resources: Teachers TV website closes for business Festival: Science takes to the stage in Denmark Research: How noise affects learning in secondary schools CERN: CERN visit inspires new teaching ideas Education: PLS aims to improve perception of science for school students Conference: Scientix conference discusses challenges in science education

    NASA Astrophysics Data System (ADS)

    2011-07-01

    Conference: Serbia hosts teachers' seminar Resources: Teachers TV website closes for business Festival: Science takes to the stage in Denmark Research: How noise affects learning in secondary schools CERN: CERN visit inspires new teaching ideas Education: PLS aims to improve perception of science for school students Conference: Scientix conference discusses challenges in science education

  5. Laser Transmitter Aims At Laser Beacon

    NASA Technical Reports Server (NTRS)

    Hemmati, Hamid; Lesh, James R.

    1993-01-01

    Transmitter part of developmental optical communication system. Compact, lightweight, partially-self-aiming laser transmitter built to verify some capabilities of developmental free-space optical communication system. Design capable of providing 0.5 Mbps data return over range equal to Moon-Earth distance. Breadboard of transmitting terminal constructed and tested in laboratory. Prototype transmitter includes receiving circuitry that keeps it aimed at beacon, once brought into initial alignment within about 1.7 degrees of line of sight to beacon.

  6. Research Summary of an Additive Manufacturing Technology for the Fabrication of 3D Composites with Tailored Internal Structure

    NASA Astrophysics Data System (ADS)

    Holmes, Larry R.; Riddick, Jaret C.

    2014-01-01

    A novel additive manufacturing technology is used to create micro-composites, which can be tailored for specific end-use applications. The Field-Aided Laminar Composite (FALCom) process uses specifically focused electric fields to align nano- to micro-sized particles into chain-like structures, which are referred to as pseudo-fibers. These pseudo-fibers are then immediately frozen into place by incident ultraviolet radiation on the photopolymer matrix. The pseudo-fibers are arranged by design, and they are used to create three-dimensional composite structures. Multiple filler materials have been evaluated for use in the FALCom system; however, this report describes aluminum micro-particles that are aligned and oriented in an acrylic photopolymer matrix. A description of the technology and a review of experimental processing are shown, and conclusions, as well as, future work are discussed.

  7. Tropical Tropospheric Ozone from SHADOZ (Southern Hemisphere ADditional Ozonesondes) Network: A Project for Satellite Research, Process Studies, Education

    NASA Technical Reports Server (NTRS)

    Thompson, Anne M.; Witte, Jacquelyn C.; Oltmans, Samuel J.; Schmidlin, Francis J.; Coetzee, G. J. R.; Hoegger, Bruno; Kirchhoff, V. W. J. H.; Ogawa, Toshihiro; Kawakami, Shuji; Posny, Francoise

    2002-01-01

    The first climatological overview of total, stratospheric and tropospheric ozone in the southern hemisphere tropical and subtropics is based on ozone sounding data from 10 sites comprising the Southern Hemisphere Additional OZonesondes (SHADOZ) network. The period covered is 1998-2000. Observations were made over: Ascension Island; Nairobi, Kenya; Irene, South Africa; Reunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil. Campaign data were collected on a trans-Atlantic oceanographic cruise and during SAFARI-2000 in Zambia. The ozone data, with simultaneous temperature profiles to approx. 7 hPa and relative humidity to approx. 200 hPa, reside at: . SHADOZ ozone time-series and profiles give a perspective on tropical total, stratospheric and tropospheric ozone. Prominent features are highly variable tropospheric ozone and a zonal wave-one pattern in total (and tropospheric) column ozone. Total, stratospheric and tropospheric column ozone amounts peak between August and November and are lowest between March and May. Tropospheric ozone variability over the Indian and Pacific Ocean displays influences of the Indian Ocean Dipole and convective mixing. Pollution transport from Africa and South America is a seasonal feature. Tropospheric ozone seasonality over the Atlantic Basin shows effects of regional subsidence and recirculation as well as biomass burning. Dynamical and chemical influences appear to be of comparable magnitude though model studies are needed to quantify this.

  8. AIM: Adventures in Movement for the Handicapped.

    ERIC Educational Resources Information Center

    Adventures In Movement for the Handicapped, Inc., Dayton, OH.

    The handbook on Adventures in Movement for the Handicapped (AIM) gives information about general organizational goals and suggests activities for use by volunteer teachers with blind, deaf, crippled, cerebral palsied, mentally retarded, and autistic children at five ability/age levels. General Information given about each handicap usually includes…

  9. AIM: Ames Imaging Module Spacecraft Camera

    NASA Technical Reports Server (NTRS)

    Thompson, Sarah

    2015-01-01

    The AIM camera is a small, lightweight, low power, low cost imaging system developed at NASA Ames. Though it has imaging capabilities similar to those of $1M plus spacecraft cameras, it does so on a fraction of the mass, power and cost budget.

  10. Demography and Population Projection of Aphis fabae (Hemiptera: Aphididae): with Additional Comments on Life Table Research Criteria.

    PubMed

    Akca, Izzet; Ayvaz, Tamer; Yazici, Eda; Smith, Cecil L; Chi, Hsin

    2015-08-01

    We collected developmental, survival, and reproduction data for Aphis fabae Scopoli (Hemiptera: Aphididae) reared on faba bean, Vicia faba L. 'Sevilla' at four constant temperatures (15, 20, 25, and 30°C), 70% relative humidity, and a photoperiod of 16:8 (L:D) h. The highest intrinsic rate of increase (r = 0.4347 d(-1)) and finite rate (λ = 1.5445 d(-1)) were observed at 25°C. The population projection based on the age-stage, two-sex life table quantitatively revealed the growth potential and stage structure of the aphid. We have included the following suggestions to aid researchers in life table studies: 1) The bootstrap method should be used to estimate the variance and SEs of developmental time, survival rate, fecundity, and population parameters. 2) The required number of bootstraps is dependent on the life table data--the higher the variation among individuals, the higher the number of bootstraps should be. In most cases, we suggest that 100,000 bootstraps should be used to obtain a stable estimate of variance and SEs. 3) Computer projection based on the age-stage, two-sex life table should be used to reveal the stage structure during population growth. 4) We used a simple equation based on the total fecundity, survival rate to adult stage, and first reproductive age to detect possible errors in life table parameters. 5) To assist readers in comprehending results, life table studies should include the cohort size, preadult survival rate, number of emerged female adults, mean fecundity, survival and fecundity curves, and population parameters. PMID:26470285

  11. Aiming Schedule For Orbiting Astrometric Telescope

    NASA Technical Reports Server (NTRS)

    Mascy, Alfred C.; Sobeck, Charlie

    1991-01-01

    Report discusses schedule of observation times and aiming directions of proposed astrometric telescope facility mounted on Space Station in orbit around Earth. Primarily makes repeated observations of apparent positions of each of 127 selected stars with respect to distant reference stars in same field of view known to have unperturbed proper motions. Purpose of observations to detect motions of selected stars about centers of mass and to analyze harmonic content of motions to infer existence, number, masses, and orbital radii of planets.

  12. Aeronomy of Ice in the Mesosphere (AIM)

    NASA Technical Reports Server (NTRS)

    2003-01-01

    The overall goal of the Aeronomy of Ice in the Mesosphere (AIM) experiment is to resolve why Polar Mesospheric Clouds form and why they vary. By measuring PMCs and the thermal, chemical and dynamical environment in which they form, we will quanti@ the connection between these clouds and the meteorology of the polar mesosphere. In the end, this will provide the basis for study of long-term variability in the mesospheric climate and its relationship to global change. The results of AIM will be a rigorous validation of predictive models that can reliably use past PMC changes and present trends as indicators of global change. The AIM goal will be achieved by measuring PMC extinction, brightness, spatial distribution, particle size distributions, gravity wave activity, dust influx to the atmosphere and precise, vertical profile measurements of temperature, H20, C&, 0 3 , C02, NO. and aerosols. These data can only be obtained by a complement of instruments on an orbiting spacecraft (S/C).

  13. Educational Neuroscience: Its Position, Aims and Expectations

    ERIC Educational Resources Information Center

    van der Meulen, Anna; Krabbendam, Lydia; de Ruyter, Doret

    2015-01-01

    An important issue in the discussion on educational neuroscience is the transfer of thought and findings between neuroscience and education. In addition to factual confusions in this transfer in the form of neuromyths, logical confusions, or neuro-misconceptions, can be identified. We consider these transfer difficulties in light of the way…

  14. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  15. Aiming Instruments On The Space Station

    NASA Technical Reports Server (NTRS)

    Estus, Jay M.; Laskin, Robert; Lin, Yu-Hwan

    1989-01-01

    Report discusses capabilities and requirements for aiming scientific instruments carried aboard proposed Space Station. Addresses two issues: whether system envisioned for pointing instruments at celestial targets offers sufficiently low jitter, high accuracy, and high stability to meet scientific requirements; whether it can do so even in presence of many vibrations and other disturbances on Space Station. Salient conclusion of study, recommendation to develop pointing-actuator system including mechanical/fluid base isolator underneath reactionaless gimbal subsystem. This kind of system offers greatest promise of high performance, cost-effectiveness, and modularity for job at hand.

  16. The aim and philosophy of patient monitoring

    PubMed Central

    Stewart, J. S. S.

    1970-01-01

    The history of monitoring is traced from ancient times until the invention of transducers and computers. The relevance of progress in resuscitation is emphasized. The more recent evolution of electromedical apparatus is considered from single signal detection, display and alarm to multiple signal processing, trend analysis and diagnosis. The aim of patient monitoring is to give warning of early or dangerous deterioration and to achieve this by obtaining an optimal compromise involving many design factors, clinical, engineering and economic. A new philosophy is illustrated by the specification and development of the Lifeline patient monitor. The translation of clinical diagnoses into electronic switching logic is of particular importance. PMID:4920275

  17. Preventing Aim At An Undesired Target

    NASA Technical Reports Server (NTRS)

    Goodzeit, Neil E.

    1991-01-01

    Electronic system controls changes in orientation of optical instrument. Slew-control system includes avoidance-control logic, which overrides slew-control error generator when line of sight of instrument comes within cone of avoidance around line of sight to Sun. Normal slewing trajectory interrupted by avoidance-control logic, which computes actuator torques taking line of sight around cone of avoidance. Used to protect delicate photodetectors in servocontrolled infrared spectrometer or imaging instrument against damage occurring if instrument aimed at Sun or another excessively bright object.

  18. The Future of Vocational Psychology: Aiming High.

    ERIC Educational Resources Information Center

    Fouad, Nadya A.

    2001-01-01

    The strengths of vocational psychology include quantitative foundations, theory-driven research, and focus on vocational assessment. Weaknesses are overemphasis on quantitative methods, lack of context, and class-bound perceptions of work. Threats include appropriation by related disciplines and the practice of vocational counseling by those…

  19. Aiming for Accountability: Oregon. Reaching Results.

    ERIC Educational Resources Information Center

    Little, Priscilla

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  20. Aiming for Accountability: Florida. Reaching Results.

    ERIC Educational Resources Information Center

    Horsch, Karen

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  1. Aiming for Accountability: Iowa. Reaching Results.

    ERIC Educational Resources Information Center

    Little, Priscilla

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  2. Aiming for Accountability: Ohio. Reaching Results.

    ERIC Educational Resources Information Center

    Schilder, Diane

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  3. Aiming for Accountability: North Carolina. Reaching Results.

    ERIC Educational Resources Information Center

    Horsch, Karen

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  4. Aiming for Accountability: Minnesota. Reaching Results.

    ERIC Educational Resources Information Center

    Schilder, Diane

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  5. Aiming for Accountability: Georgia. Reaching Results.

    ERIC Educational Resources Information Center

    Schilder, Diane

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  6. Aiming for Accountability: Vermont. Reaching Results.

    ERIC Educational Resources Information Center

    Horsch, Karen

    Interest is growing in planning and implementing new systems of holding child and family services accountable for results. The Results-Based Accountability (RBA) Project at the Harvard Family Research Project (HFRP) has supported and built upon recent state efforts to develop these new accountability systems for child and family services. The RBA…

  7. Raising Expectations is Aim of New Effort

    ERIC Educational Resources Information Center

    Sparks, Sarah D.

    2010-01-01

    Researchers and policymakers agree that teachers' expectations of what their students can do can become self-fulfilling prophecies for children's academic performance. Yet while the "soft bigotry of low expectations" has become an education catchphrase, scholars and advocates are just beginning to explore whether it is possible to prevent such…

  8. Project Aims to Bridge Neuroscience and Schools

    ERIC Educational Resources Information Center

    Samuels, Christina A.

    2008-01-01

    Using imaging technology that can probe the deepest workings of the brain, researchers have found that children with attention deficit hyperactivity disorder are using less of a certain part of their brains to hold back their itchy trigger fingers, compared with typically developing children performing the same task. This information was shared…

  9. Studies Spotlight Charter Schools Aimed at Diversity

    ERIC Educational Resources Information Center

    Zubrzycki, Jaclyn

    2012-01-01

    Nearly six decades after "Brown" v. "Board of Education," the landmark U.S. Supreme Court decision that ushered in an era of efforts to integrate public schools, charter school advocates and researchers are shining a light on a number of those independent public schools that are integrated by design. Two new reports--one from the National Alliance…

  10. Work, the Aims of Life and the Aims of Education: A Reply to Clarke and Mearman

    ERIC Educational Resources Information Center

    Winch, Christopher

    2004-01-01

    The main points made by Clarke and Mearman about Winch's article, 'The Economic Aims of Education,' are taken up and discussed. My argument is that work is not necessarily a disutility, although paid employment can be when it is undertaken in conditions that are not fulfilling. Life aims are not the same as educational aims, although educational…

  11. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  12. AIM cryocooler developments for HOT detectors

    NASA Astrophysics Data System (ADS)

    Rühlich, I.; Mai, M.; Withopf, A.; Rosenhagen, C.

    2014-06-01

    Significantly increased FPA temperatures for both Mid Wave and Long Wave IR detectors, i.e. HOT detectors, which have been developed in recent years are now leaving the development phase and are entering real application. HOT detectors allowing to push size weight and power (SWaP) of Integrated Detectors Cooler Assemblies (IDCA's) to a new level. Key component mainly driving achievable weight, volume and power consumption is the cryocooler. AIM cryocooler developments are focused on compact, lightweight linear cryocoolers driven by compact and high efficient digital cooler drive electronics (DCE) to also achieve highest MTTF targets. This technology is using moving magnet driving mechanisms and dual or single piston compressors. Whereas SX030 which was presented at SPIE in 2012 consuming less 3 WDC to operate a typical IDCA at 140K, next smaller cooler SX020 is designed to provide sufficient cooling power at detector temperature above 160K. The cooler weight of less than 200g and a total compressor length of 60mm makes it an ideal solution for all applications with limited weight and power budget, like in handheld applications. For operating a typical 640x512, 15μm MW IR detector the power consumption will be less than 1.5WDC. MTTF for the cooler will be in excess of 30,000h and thus achieving low maintenance cost also in 24/7 applications. The SX020 compressor is based on a single piston design with integrated passive balancer in a new design achieves very low exported vibration in the order of 100mN in the compressor axis. AIM is using a modular approach, allowing the chose between 5 different compressor types for one common Stirling expander. The 6mm expander with a total length of 74mm is now available in a new design that fits into standard dewar bores originally designed for rotary coolers. Also available is a 9mm coldfinger in both versions. In development is an ultra-short expander with around 35mm total length to achieve highest compactness. Technical

  13. Night vision adapter for an aiming telescope

    NASA Astrophysics Data System (ADS)

    Granciu, Dana; Mitricica, Doina-Narcisa; Serban, Greta

    2015-02-01

    Actual requirements impose more and more to convert rapidly a daytime aiming telescope, (called also telescopic sight or riflescope) into a night vision device. Recent progress achieved in the development of various image sensors over a wide spectral range, from visible to Long-wave infrared (LWIR), made possible to develop new solutions for performant night vision adapters. These attachments can increase the visibility at night but can be designed to cover also some low visibility conditions during the day such as fog, smoke and dust, especially if we refer to the Short-wave infrared spectral band (SWIR). The paper analyzes possible constructive solutions for digital riflescope attachments, destined to work at night and/or in low visibility during the day.

  14. Aiming drug discovery at lysophosphatidic acid targets

    PubMed Central

    Tigyi, Gabor

    2010-01-01

    Lysophosphatidic acid (LPA, 1-radyl-2-hydroxy-sn-glycero-3-phosphate) is the prototype member of a family of lipid mediators and second messengers. LPA and its naturally occurring analogues interact with G protein-coupled receptors on the cell surface and a nuclear hormone receptor within the cell. In addition, there are several enzymes that utilize LPA as a substrate or generate it as a product and are under its regulatory control. LPA is present in biological fluids, and attempts have been made to link changes in its concentration and molecular composition to specific disease conditions. Through their many targets, members of the LPA family regulate cell survival, apoptosis, motility, shape, differentiation, gene transcription, malignant transformation and more. The present review depicts arbitrary aspects of the physiological and pathophysiological actions of LPA and attempts to link them with select targets. Many of us are now convinced that therapies targeting LPA biosynthesis and signalling are feasible for the treatment of devastating human diseases such as cancer, fibrosis and degenerative conditions. However, successful targeting of the pathways associated with this pleiotropic lipid will depend on the future development of as yet undeveloped pharmacons. PMID:20735414

  15. AIMS mask qualification for 32nm node

    NASA Astrophysics Data System (ADS)

    Richter, Rigo; Thaler, Thomas; Seitz, Holger; Stroessner, Ulrich; Scheruebl, Thomas

    2009-10-01

    Moving forward to 32nm node and below optical lithography using 193nm is faced with complex requirements to be solved. Mask makers are forced to address both Double Patterning Techniques and Computational Lithography approaches such as Source Mask Optimizations and Inverse Lithography. Additionally, lithography at low k1 values increases the challenges for mask repair as well as for repair verification and review by AIMSTM. Higher CD repeatability, more flexibility in the illumination settings as well as significantly improved image performance must be added when developing the next generation mask qualification equipment. This paper reports latest measurement results verifying the appropriateness of the latest member of AIMSTM measurement tools - the AIMSTM 32-193i. We analyze CD repeatability measurements on lines and spaces pattern. The influence of the improved optical performance and newly introduced interferometer stage will be verified. This paper highlights both the new Double Patterning functionality emulating double patterning processes and the influence of its critical parameters such as overlay errors and resist impact. Beneficial advanced illumination schemes emulating scanner illumination document the AIMSTM 32-193i to meet mask maker community's requirements for the 32nm node.

  16. [Political aspects and aims of telematics].

    PubMed

    Paland, N; Riepe, C

    2005-06-01

    Germany has a health care system that uses sophisticated technologies. On the other hand, with respect to the most important human asset--good health--duplication of work, media discontinuity, and incompatible documentations persist. The sector-oriented service structures and pillars of our health-care system are also reflect ed in the area of informatics and communication technologies. In the German health care system every institution in itself is an isolated solution, partially in line with the latest scientific research, but singular. As a rule, the limits of information technology are reached where the economic and business capacities of one's own institution are exhausted. So the essential advantage of telematics, which is in particular the use of synergistic benefits, is given away. Therefore, both the infrastructural conditions for the use of telematics have to be improved and also important key applications such as the electronic prescription have to be encouraged. By introducing the new electronic health card, the nation wide use of health telematics in Germany can be promoted. The activities of the Federal Government and the legislation initiated within the scope of the Act on the Modernization of the Statutory Health Insurance serve to expedite these improvements. The extension of the current health insurance card to an electronic health card is the task of the central associations of self-administration. They are also obligated to fulfill the agreement on the infrastructure necessary for the electronic health card. PMID:15983836

  17. Research of the Additional Losses Occurring in Optical Fiber at its Multiple Bends in the Range Waves 1310nm, 1550nm and 1625nm Long

    NASA Astrophysics Data System (ADS)

    Yurchenko, A. V.; Gorlov, N. I.; Alkina, A. D.; Mekhtiev, A. D.; Kovtun, A. A.

    2016-01-01

    Article is devoted to research of the additional losses occurring in the optical fiber at its multiple bends in the range waves of 1310 nanometers, 1550 nanometers and 1625 nanometers long. Article is directed on creation of the external factors methods which allow to estimate and eliminate negative influence. The automated way of calculation of losses at a bend is developed. Results of scientific researches are used by engineers of “Kazaktelekom” AS for practical definition of losses service conditions. For modeling the Wolfram|Alpha environment — the knowledge base and a set of computing algorithms was chosen. The greatest losses are noted on wavelength 1310nm and 1625nm. All dependences are nonlinear. Losses with each following excess are multiplicative.

  18. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  19. Identification of bacteria synthesizing ribosomal RNA in response to uranium addition during biostimulation at the Rifle, CO Integrated Field Research site

    SciTech Connect

    McGuinness, Lora R.; Wilkins, Michael J.; Williams, Kenneth H.; Long, Philip E.; Kerkhof, Lee J.; Boyanov, Maxim I.

    2015-09-18

    Understanding which organisms are capable of reducing uranium at historically contaminated sites provides crucial information needed to evaluate treatment options and outcomes. One approach is determination of the bacteria which directly respond to uranium addition. In this research, uranium amendments were made to groundwater samples from a site of ongoing biostimulation with acetate. The active microbes in the planktonic phase were deduced by monitoring ribosomes production via RT-PCR. The results indicated several microorganisms were synthesizing ribosomes in proportion with uranium amendment up to 2 μM. Concentrations of U (VI) >2 μM were generally found to inhibit ribosome synthesis. Two active bacteria responding to uranium addition in the field were close relatives of Desulfobacter postgateii and Geobacter bemidjiensis. Since RNA content often increases with growth rate, our findings suggest it is possible to rapidly elucidate active bacteria responding to the addition of uranium in field samples and provides a more targeted approach to stimulate specific populations to enhance radionuclide reduction in contaminated sites.

  20. Identification of bacteria synthesizing ribosomal RNA in response to uranium addition during biostimulation at the Rifle, CO Integrated Field Research site

    DOE PAGESBeta

    McGuinness, Lora R.; Wilkins, Michael J.; Williams, Kenneth H.; Long, Philip E.; Kerkhof, Lee J.; Boyanov, Maxim I.

    2015-09-18

    Understanding which organisms are capable of reducing uranium at historically contaminated sites provides crucial information needed to evaluate treatment options and outcomes. One approach is determination of the bacteria which directly respond to uranium addition. In this research, uranium amendments were made to groundwater samples from a site of ongoing biostimulation with acetate. The active microbes in the planktonic phase were deduced by monitoring ribosomes production via RT-PCR. The results indicated several microorganisms were synthesizing ribosomes in proportion with uranium amendment up to 2 μM. Concentrations of U (VI) >2 μM were generally found to inhibit ribosome synthesis. Two activemore » bacteria responding to uranium addition in the field were close relatives of Desulfobacter postgateii and Geobacter bemidjiensis. Since RNA content often increases with growth rate, our findings suggest it is possible to rapidly elucidate active bacteria responding to the addition of uranium in field samples and provides a more targeted approach to stimulate specific populations to enhance radionuclide reduction in contaminated sites.« less

  1. Advanced Industrial Materials (AIM) Program: Annual progress report FY 1995

    SciTech Connect

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for FY 1995 contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Areas covered here are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  2. Action Information Management System (AIMS): a User's View

    NASA Technical Reports Server (NTRS)

    Wiskerchen, M.

    1984-01-01

    The initial approach used in establishing a user-defined information system to fulfill the needs of users at NASA Headquarters was unsuccessful in bringing this pilot endeaveor to full project status. The persistence of several users and the full involvement of the Ames Research Center were the ingredients needed to make the AIMS project a success. The lesson learned from this effort is that NASA should always work from its organizational strengths as a Headquarters-Center partnership.

  3. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  4. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  5. [International regulation of ethics committees on biomedical research as protection mechanisms for people: analysis of the Additional Protocol to the Convention on Human Rights and Biomedicine, concerning Biomedical Research of the Council of Europe].

    PubMed

    de Lecuona, Itziar

    2013-01-01

    The article explores and analyses the content of the Council of Europe's Additional Protocol to the Convention on Human Rights and Biomedicine concerning Biomedical Research regarding the standard legal instrument in biomedical research, issued by an international organization with leadership in bioethics. This implies ethics committees are mechanisms of protection of humans in biomedical research and not mere bureaucratic agencies and that a sound inescapable international regulatory framework exists for States to regulate biomedical research. The methodology used focuses on the analysis of the background, the context in which it is made and the nature and scope of the Protocol. It also identifies and analyses the characteristics and functions of ethics committees in biomedical research and, in particular, the information that should be provided to this bodies to develop their functions previously, during and at the end of research projects. This analysis will provide guidelines, suggestions and conclusions for the awareness and training of members of these committees in order to influence the daily practice. This paper may also be of interest to legal practitioners who work in different areas of biomedical research. From this practical perspective, the article examines the legal treatment of the Protocol to meet new challenges and classic issues in research: the treatment of human biological samples, the use of placebos, avoiding double standards, human vulnerability, undue influence and conflicts of interest, among others. Also, from a critical view, this work links the legal responses to develop work procedures that are required for an effective performance of the functions assigned of ethics committees in biomedical research. An existing international legal response that lacks doctrinal standards and provides little support should, however, serve as a guide and standard to develop actions that allow ethics committees -as key bodies for States- to advance in

  6. Regular and Random Components in Aiming-Point Trajectory During Rifle Aiming and Shooting

    PubMed Central

    Goodman, Simon; Haufler, Amy; Shim, Jae Kun; Hatfield, Bradley

    2009-01-01

    The authors examined the kinematic qualities of the aiming trajectory as related to expertise. In all, 2 phases of the trajectory were discriminated. The first phase was regular approximation to the target accompanied by substantial fluctuations obeying the Weber–Fechner law. During the first phase, shooters did not initiate the triggering despite any random closeness of the aiming point (AP) to the target. In the second phase, beginning at 0.6–0.8 s before the trigger pull, shooters applied a different control strategy: They waited until the following random fluctuation brought the AP closer to the target and then initiated triggering. This strategy is tenable when sensitivity of perception is greater than precision of the motor action, and could be considered a case of stochastic resonance. The strategies that novices and experts used distinguished only in the values of parameters. The authors present an analytical model explaining the main properties of shooting. PMID:19508963

  7. CoAIMs: A Cost-Effective Panel of Ancestry Informative Markers for Determining Continental Origins

    PubMed Central

    Londin, Eric R.; Keller, Margaret A.; Maista, Cathleen; Smith, Gretchen; Mamounas, Laura A.; Zhang, Ran; Madore, Steven J.; Gwinn, Katrina; Corriveau, Roderick A.

    2010-01-01

    Background Genetic ancestry is known to impact outcomes of genotype-phenotype studies that are designed to identify risk for common diseases in human populations. Failure to control for population stratification due to genetic ancestry can significantly confound results of disease association studies. Moreover, ancestry is a critical factor in assessing lifetime risk of disease, and can play an important role in optimizing treatment. As modern medicine moves towards using personal genetic information for clinical applications, it is important to determine genetic ancestry in an accurate, cost-effective and efficient manner. Self-identified race is a common method used to track and control for population stratification; however, social constructs of race are not necessarily informative for genetic applications. The use of ancestry informative markers (AIMs) is a more accurate method for determining genetic ancestry for the purposes of population stratification. Methodology/Principal Findings Here we introduce a novel panel of 36 microsatellite (MSAT) AIMs that determines continental admixture proportions. This panel, which we have named Continental Ancestry Informative Markers or CoAIMs, consists of MSAT AIMs that were chosen based upon their measure of genetic variance (Fst), allele frequencies and their suitability for efficient genotyping. Genotype analysis using CoAIMs along with a Bayesian clustering method (STRUCTURE) is able to discern continental origins including Europe/Middle East (Caucasians), East Asia, Africa, Native America, and Oceania. In addition to determining continental ancestry for individuals without significant admixture, we applied CoAIMs to ascertain admixture proportions of individuals of self declared race. Conclusion/Significance CoAIMs can be used to efficiently and effectively determine continental admixture proportions in a sample set. The CoAIMs panel is a valuable resource for genetic researchers performing case-control genetic

  8. Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

    SciTech Connect

    1998-05-01

    The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.

  9. Additional insights. Commentary on “the musical stroop effect: opening a new avenue to research on automatisms” by l. Grégoire, P. Perruchet, and B. Poulin-Charronnat (Experimental Psychology, 2013, vol. 60, pp. 269–278).

    PubMed

    Akiva-Kabiri, Lilach; Henik, Avishai

    2014-01-01

    In their paper "The Musical Stroop Effect: Opening a New Avenue to Research on Automatisms," Grégoire, Perruchet, and Poulin-Charronnat (2013) use a musical Stroop-like task to demonstrate the automaticity of musical note naming in musicians. In addition, the authors suggest that music training can serve as a tool in order to study the acquisition of automaticity. In the following commentary, we aim to address three main issues concerning the paper by Grégoire et al. (2013). First, we will suggest some additional interpretations of the results; specifically, we will relate to the association between music and space. Second, we will discuss a methodological issue dealing with interference, facilitation, and the role of the neutral condition. We suggest that the study by Grégoire et al. (2013) lacks a proper neutral condition and thus it is impossible to assert that the congruency effect is interference based. Third, we will discuss the authors' suggestion of using the musical Stroop effect as a tool for studying automatism. We consider the practical relevance of music training as a tool for studying the acquisition of automaticity by pointing out that music training is highly heterogeneous. PMID:24449650

  10. Explanation in Biology: Reduction, Pluralism, and Explanatory Aims

    NASA Astrophysics Data System (ADS)

    Brigandt, Ingo

    2013-01-01

    This essay analyzes and develops recent views about explanation in biology. Philosophers of biology have parted with the received deductive-nomological model of scientific explanation primarily by attempting to capture actual biological theorizing and practice. This includes an endorsement of different kinds of explanation (e.g., mathematical and causal-mechanistic), a joint study of discovery and explanation, and an abandonment of models of theory reduction in favor of accounts of explanatory reduction. Of particular current interest are philosophical accounts of complex explanations that appeal to different levels of organismal organization and use contributions from different biological disciplines. The essay lays out one model that views explanatory integration across different disciplines as being structured by scientific problems. I emphasize the philosophical need to take the explanatory aims pursued by different groups of scientists into account, as explanatory aims determine whether different explanations are competing or complementary and govern the dynamics of scientific practice, including interdisciplinary research. I distinguish different kinds of pluralism that philosophers have endorsed in the context of explanation in biology, and draw several implications for science education, especially the need to teach science as an interdisciplinary and dynamic practice guided by scientific problems and explanatory aims.

  11. Automated Instrumentation, Monitoring and Visualization of PVM Programs Using AIMS

    NASA Technical Reports Server (NTRS)

    Mehra, Pankaj; VanVoorst, Brian; Yan, Jerry; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    We present views and analysis of the execution of several PVM (Parallel Virtual Machine) codes for Computational Fluid Dynamics on a networks of Sparcstations, including: (1) NAS Parallel Benchmarks CG and MG; (2) a multi-partitioning algorithm for NAS Parallel Benchmark SP; and (3) an overset grid flowsolver. These views and analysis were obtained using our Automated Instrumentation and Monitoring System (AIMS) version 3.0, a toolkit for debugging the performance of PVM programs. We will describe the architecture, operation and application of AIMS. The AIMS toolkit contains: (1) Xinstrument, which can automatically instrument various computational and communication constructs in message-passing parallel programs; (2) Monitor, a library of runtime trace-collection routines; (3) VK (Visual Kernel), an execution-animation tool with source-code clickback; and (4) Tally, a tool for statistical analysis of execution profiles. Currently, Xinstrument can handle C and Fortran 77 programs using PVM 3.2.x; Monitor has been implemented and tested on Sun 4 systems running SunOS 4.1.2; and VK uses XIIR5 and Motif 1.2. Data and views obtained using AIMS clearly illustrate several characteristic features of executing parallel programs on networked workstations: (1) the impact of long message latencies; (2) the impact of multiprogramming overheads and associated load imbalance; (3) cache and virtual-memory effects; and (4) significant skews between workstation clocks. Interestingly, AIMS can compensate for constant skew (zero drift) by calibrating the skew between a parent and its spawned children. In addition, AIMS' skew-compensation algorithm can adjust timestamps in a way that eliminates physically impossible communications (e.g., messages going backwards in time). Our current efforts are directed toward creating new views to explain the observed performance of PVM programs. Some of the features planned for the near future include: (1) ConfigView, showing the physical topology

  12. Automated Instrumentation, Monitoring and Visualization of PVM Programs Using AIMS

    NASA Technical Reports Server (NTRS)

    Mehra, Pankaj; VanVoorst, Brian; Yan, Jerry; Tucker, Deanne (Technical Monitor)

    1994-01-01

    We present views and analysis of the execution of several PVM codes for Computational Fluid Dynamics on a network of Sparcstations, including (a) NAS Parallel benchmarks CG and MG (White, Alund and Sunderam 1993); (b) a multi-partitioning algorithm for NAS Parallel Benchmark SP (Wijngaart 1993); and (c) an overset grid flowsolver (Smith 1993). These views and analysis were obtained using our Automated Instrumentation and Monitoring System (AIMS) version 3.0, a toolkit for debugging the performance of PVM programs. We will describe the architecture, operation and application of AIMS. The AIMS toolkit contains (a) Xinstrument, which can automatically instrument various computational and communication constructs in message-passing parallel programs; (b) Monitor, a library of run-time trace-collection routines; (c) VK (Visual Kernel), an execution-animation tool with source-code clickback; and (d) Tally, a tool for statistical analysis of execution profiles. Currently, Xinstrument can handle C and Fortran77 programs using PVM 3.2.x; Monitor has been implemented and tested on Sun 4 systems running SunOS 4.1.2; and VK uses X11R5 and Motif 1.2. Data and views obtained using AIMS clearly illustrate several characteristic features of executing parallel programs on networked workstations: (a) the impact of long message latencies; (b) the impact of multiprogramming overheads and associated load imbalance; (c) cache and virtual-memory effects; and (4significant skews between workstation clocks. Interestingly, AIMS can compensate for constant skew (zero drift) by calibrating the skew between a parent and its spawned children. In addition, AIMS' skew-compensation algorithm can adjust timestamps in a way that eliminates physically impossible communications (e.g., messages going backwards in time). Our current efforts are directed toward creating new views to explain the observed performance of PVM programs. Some of the features planned for the near future include: (a) Config

  13. Updating, employing, and adapting: a commentary on What does it mean to "employ" the RE-AIM model.

    PubMed

    Estabrooks, Paul A; Allen, Kacie C

    2013-03-01

    The Reach Effectiveness Adoption Implementation Maintenance (RE-AIM) model was developed to improve the likelihood of translating health promotion intervention research into practice. In their evaluation of grant proposals focusing on the dissemination and implementation, Kessler and colleagues (2012) proposed a method for evaluating the degree to which RE-AIM was "fully employed" across proposals. The article includes excellent operational definitions and important additions related to the use of qualitative and cost data. However, in our review of the article, we identified a number of areas that would benefit from further consideration. Specifically, we provide additional recommendations related to the employment of the model across different trial types, the need to focus on cost across RE-AIM dimensions, and the use of qualitative data. PMID:23045308

  14. Reducing Bureaucratic Accretion in Government and University Procedures for Sponsored Research. New Approaches in Process and Additional Areas for Attention. Proceedings of a Hearing, June 5, 1985. Summary.

    ERIC Educational Resources Information Center

    National Academy of Sciences, Washington, DC. Government-University-Industry Research Roundtable.

    On June 5, 1985, the Government-University-Industry Research Roundtable conducted a hearing designed to be the first step in what will be a continuing process by the Research Roundtable of seeking ways to improve the efficiency and effectiveness of the sponsored research system. The goal of the hearing was to identify ways to simplify the system…

  15. Space Insect-Food Aiming at Mars Emigration

    NASA Astrophysics Data System (ADS)

    Katayama, Naomi; Hashimoto, Hirofumi; Yamashita, Masamichi; Takase, Yoshimi; Kawai, Mika; Space Agriculture Task Force

    We study space insect-food during 10 years. We are aiming at Mars emigration. In space agriculture, insect is the important creature which we cannot miss. It is necessary for the pollination of the plant, and it is rich to protein and lipid as food. We reported that silkworm, bee, grasshopper, snail, fly and termite (white ant) are insects necessary for astroponics in particular last time. We make clothes using silk thread, and the pupa becomes the food. In addition, the clothes can make food as protein when we need not to use it. The bee is a very important insect in the space agriculture, too. We calculated the nourishment ingredient of those insects and thought about ideal space foods which ara necessary for Mars emigration. We will introduce good balance space foods.

  16. Infrared focal plane detector modules for space applications at AIM

    NASA Astrophysics Data System (ADS)

    Hübner, Dominique; Hanna, Stefan; Thöt, Richard; Gassmann, Kai-Uwe; Haiml, Markus; Weber, Andreas; Haas, Luis-Dieter; Ziegler, Johann; Nothaft, Hans-Peter; Fick, W.

    2012-09-01

    In the framework of this paper, AIM presents the actual status of some of its currently ongoing focal plane detector module developments for space applications covering the spectral range from the short-wavelength infrared (SWIR) to the long-wavelength infrared (LWIR) and very-long-wavelength infrared (VLWIR), where both imaging and spectroscopy applications will be addressed. In particular, the integrated detector cooler assemblies for a mid-wavelength infrared (MWIR) push-broom imaging satellite mission, for the German hyperspectral satellite mission EnMAP will be elaborated. Additionally dedicated detector modules for LWIR/VLWIR sounding, providing the possibility to have two different PVs driven by one ROIC will be addressed.

  17. Aiming routines and their electrocortical concomitants among competitive rifle shooters.

    PubMed

    Konttinen, N; Landers, D M; Lyytinen, H

    2000-06-01

    The present study focused on an examination of competitive shooters' aiming process during a rifle shooting task. The barrel movements of the rifle, as detected by a laser system during the last 1000-ms time period preceding the triggering, were recorded from six elite and six pre-elite shooters. Electrocortical slow potentials (SPs) from frontal (Fz), centro-lateral (C3, C4), and occipital (Oz) brain areas were recorded to get an additional insight into the underlying covert processing. The results suggested that the elite shooters did not pull the trigger until they reached a sustained rifle position. In the pre-elite shooters the rifle appeared to be in a less stable position, and their strategy was to take advantage of the first appropriate moment of steadiness without a sustained rifle position so they could pull the trigger. The observed pre-trigger readiness potential (RP) shifts at Fz and Oz were more positive among the elite shooters relative to the pre-elite shooters, reflecting their more pronounced covert effort, rather than increasing preparedness for the trigger pull. The present study lends support for the view that a successful aiming strategy is mainly based on sustained rifle balancing. With regards to the brain slow potentials, it can be concluded that the RP shift does not specifically reflect the preparation for the trigger pull. PMID:10843511

  18. The Automated Instrumentation and Monitoring System (AIMS) reference manual

    NASA Technical Reports Server (NTRS)

    Yan, Jerry; Hontalas, Philip; Listgarten, Sherry

    1993-01-01

    Whether a researcher is designing the 'next parallel programming paradigm,' another 'scalable multiprocessor' or investigating resource allocation algorithms for multiprocessors, a facility that enables parallel program execution to be captured and displayed is invaluable. Careful analysis of execution traces can help computer designers and software architects to uncover system behavior and to take advantage of specific application characteristics and hardware features. A software tool kit that facilitates performance evaluation of parallel applications on multiprocessors is described. The Automated Instrumentation and Monitoring System (AIMS) has four major software components: a source code instrumentor which automatically inserts active event recorders into the program's source code before compilation; a run time performance-monitoring library, which collects performance data; a trace file animation and analysis tool kit which reconstructs program execution from the trace file; and a trace post-processor which compensate for data collection overhead. Besides being used as prototype for developing new techniques for instrumenting, monitoring, and visualizing parallel program execution, AIMS is also being incorporated into the run-time environments of various hardware test beds to evaluate their impact on user productivity. Currently, AIMS instrumentors accept FORTRAN and C parallel programs written for Intel's NX operating system on the iPSC family of multi computers. A run-time performance-monitoring library for the iPSC/860 is included in this release. We plan to release monitors for other platforms (such as PVM and TMC's CM-5) in the near future. Performance data collected can be graphically displayed on workstations (e.g. Sun Sparc and SGI) supporting X-Windows (in particular, Xl IR5, Motif 1.1.3).

  19. AIM thermal imagers for reconnaissance and targeting applications

    NASA Astrophysics Data System (ADS)

    Breiter, Rainer; Cabanski, Wolfgang; Ihle, Tobias; Mauk, Karl-Heinz; Rode, Werner

    2006-05-01

    AIM has developed a thermal weapon sight HuntIR based on a cooled MCT 384x288 MWIR detection module combining long range battlefield surveillance and target engagement purposes. Since December 2004 the device is in service for the Germany Future Infantryman (IdZ) basic system. To satisfy the demands of the follow-up program German Future Infantryman extended system (IdZ ES) additional components like a laser range finder, digital magnetic compass and a wireless data link will be included to provide e.g. an improved hit rate by accurate range data. To reduce power consumption and increase operation time of the actual device on the one hand and give the possibility to include new components and functions a new optimized command and control electronics and image processing unit was designed using latest digital signal processors resulting in lower power consumption and higher computing power. This allows also an implementation of additional image enhancement functions. The design concept of the upgraded HuntIR is introduced together which the features of the new electronics. Additionally some new implementations will be presented concerning the existing HuntIR device like fire control for the 40mm Grenade Machine Gun made by Heckler&Koch which where possible due to the reprogrammable architecture of the design. Also an uncooled IR Imaging Module designed for use in small UAVs and short range thermal weapon sights was successfully tested in the German Army small UAV ALADIN made by EMT. After the first flight trials the design was revised to incorporate lessons learned including e.g. an athermal lens design to avoid any need of focussing. The features of the revised design will be presented.

  20. International Conference on Recent Research and Development in Vocational Education (Adelaide, South Australia, Australia, March 12-19, 1989). Additional Papers.

    ERIC Educational Resources Information Center

    TAFE National Centre for Research and Development, Payneham (Australia).

    The conference recorded in this document covered a wide variety of themes and consisted of keynote addresses, research presentations, and workshops. The following keynote addresses are include: "Some Recent TAFE National Centre Research and Development in Australian Vocational Education" (Hall); "Vocational Teacher Education: Principles,…

  1. Ultimate Educational Aims, Overridingness, and Personal Well-Being

    ERIC Educational Resources Information Center

    Haji, Ishtiyaque; Cuypers, Stefaan E.

    2011-01-01

    Discussion regarding education's aims, especially its ultimate aims, is a key topic in the philosophy of education. These aims or values play a pivotal role in regulating and structuring moral and other types of normative education. We outline two plausible strategies to identify and justify education's ultimate aims. The first associates these…

  2. INTERMAP: background, aims, design, methods, and descriptive statistics (nondietary).

    PubMed

    Stamler, J; Elliott, P; Dennis, B; Dyer, A R; Kesteloot, H; Liu, K; Ueshima, H; Zhou, B F

    2003-09-01

    Blood pressure (BP) above optimal (< or =120/< or =80 mmHg) is established as a major cardiovascular disease (CVD) risk factor. Prevalence of adverse BP is high in most adult populations; until recently research has been sparse on reasons for this. Since the 1980s, epidemiologic studies confirmed that salt, alcohol intake, and body mass relate directly to BP; dietary potassium, inversely. Several other nutrients also probably influence BP. The DASH feeding trials demonstrated that with the multiple modifications in the DASH combination diet, SBP/DBP (SBP: systolic blood pressure, DBP: diastolic blood pressure) was sizably reduced, independent of calorie balance, alcohol intake, and BP reduction with decreased dietary salt. A key challenge for research is to elucidate specific nutrients accounting for this effect. The general aim of the study was to clarify influences of multiple nutrients on SBP/DBP of individuals over and above effects of Na, K, alcohol, and body mass. Specific aims were, in a cross-sectional epidemiologic study of 4680 men and women aged 40-59 years from 17 diverse population samples in China, Japan, UK, and USA, test 10 prior hypotheses on relations of macronutrients to SBP/DBP and on role of dietary factors in inverse associations of education with BP; test four related subgroup hypotheses; explore associations with SBP/DBP of multiple other nutrients, urinary metabolites, and foods. For these purposes, for all 4680 participants, with standardized high-quality methods, assess individual intake of 76 nutrients from four 24-h dietary recalls/person; measure in two timed 24-h urine collections/person 24-h excretion of Na, K, Ca, Mg, creatinine, amino acids; microalbuminuria; multiple nutrients and metabolites by nuclear magnetic resonance and high-pressure liquid chromatography. Based on eight SBP/DBP measurements/person, and data on multiple possible confounders, utilize mainly multiple linear regression and quantile analyses to test prior

  3. Gaussian benchmark for optical communication aiming towards ultimate capacity

    NASA Astrophysics Data System (ADS)

    Lee, Jaehak; Ji, Se-Wan; Park, Jiyong; Nha, Hyunchul

    2016-05-01

    We establish the fundamental limit of communication capacity within Gaussian schemes under phase-insensitive Gaussian channels, which employ multimode Gaussian states for encoding and collective Gaussian operations and measurements for decoding. We prove that this Gaussian capacity is additive, i.e., its upper bound occurs with separable encoding and separable receivers so that a single-mode communication suffices to achieve the largest capacity under Gaussian schemes. This rigorously characterizes the gap between the ultimate Holevo capacity and the capacity within Gaussian communication, showing that Gaussian regime is not sufficient to achieve the Holevo bound particularly in the low-photon regime. Furthermore, the Gaussian benchmark established here can be used to critically assess the performance of non-Gaussian protocols for optical communication. We move on to identify non-Gaussian schemes to beat the Gaussian capacity and show that a non-Gaussian receiver recently implemented by Becerra et al. [F. E. Becerra et al., Nat. Photon. 7, 147 (2013), 10.1038/nphoton.2012.316] can achieve this aim with an appropriately chosen encoding strategy.

  4. First results from AIMS beta tool for 157-nm lithography

    NASA Astrophysics Data System (ADS)

    Teuber, Silvio; Higashikawa, Iwao; Urbach, Jan-Peter; Schilz, Christof M.; Koehle, Roderick; Zibold, Axel M.

    2004-05-01

    In modern mask manufacturing, a successful defect mitigation strategy has been become crucial to achieve defect free masks for high-end lithography. The basic steps of such a strategy include inspection, repair, and subsequent post-repair qualification of repair sites. For the latter task, actinic aerial image measurements have been proven to be the technique of choice to assess the printability of a repaired site. In the last three years, International SEMATECH in cooperation with Infineon/AMTC-Dresden and SELETE, funded a joint development project at Carl Zeiss to develop an AIMS tool operating at the 157nm wavelength. The three beta tools were shipped in 2003 to the three beta customer sites. In this paper are presented the first results obtained with these beta tools, including measurements on binary as well as alternating phase shift masks. The technical properties of the tool were discussed with regards to the capability of the tool for defect qualification on photomasks. Additionally, preliminary results of the evaluation of alternating phase shift masks will be discussed, including measurements performed on dense lines-and-spaces structures with various pitch sizes.

  5. Determination of the Composition and Quantity of Phthalate Ester Additives in PVC Children's Toys. Greenpeace Research Laboratories Technical Note 06/97.

    ERIC Educational Resources Information Center

    Stringer, Ruth; Labounskaia, Irina; Santillo, David; Johnston, Paul; Siddorn, John; Stephenson, Angela

    Polyvinyl chloride (vinyl or PVC) is widely used in toys and other children's products. This study, conducted by Greenpeace, examined the composition and quantity of phthalate ester additives in children's PVC toys, used to give the toys added flexibility. Drawn from 17 countries, a total of 71 toys designed to be chewed by babies and young…

  6. The airborne mass spectrometer AIMS - Part 1: AIMS-H2O for UTLS water vapor measurements

    NASA Astrophysics Data System (ADS)

    Kaufmann, S.; Voigt, C.; Jurkat, T.; Thornberry, T.; Fahey, D. W.; Gao, R.-S.; Schlage, R.; Schäuble, D.; Zöger, M.

    2015-12-01

    In the upper troposphere and lower stratosphere (UTLS), the accurate quantification of low water vapor concentrations has presented a significant measurement challenge. The instrumental uncertainties are passed on to estimates of H2O transport, cloud formation and the H2O role in the UTLS energy budget and resulting effects on surface temperatures. To address the uncertainty in UTLS H2O determination, the airborne mass spectrometer AIMS-H2O, with in-flight calibration, has been developed for fast and accurate airborne water vapor measurements. We present the new setup to measure water vapor by direct ionization of ambient air. Air is sampled via a backward facing inlet that includes a bypass flow to assure short residence times (< 0.2 s) in the inlet line, which allows the instrument to achieve a time resolution of ∼ 4 Hz. From the main inlet flow, a smaller flow is extracted into the novel pressure-controlled gas discharge ion source of the mass spectrometer. The air is directed through the gas discharge region where water molecules react to form hydronium ion clusters, H3O+(H2O)n (n= 0, 1, 2), in a complex reaction scheme similar to the reactions in the D-region of the ionosphere. These ions are counted to quantify the ambient water vapor mixing ratio. The instrument is calibrated during flight using a new calibration source based on the catalytic reaction of H2 and O2 on a Pt surface to generate a calibration standard with well defined and stable H2O mixing ratios. In order to increase data quality over a range of mixing ratios, two data evaluation methods are presented for lower and higher H2O mixing ratios respectively, using either only the H3O+(H2O) ions or the ratio of all water vapor dependent ions to the total ion current. Altogether, a range of water vapor mixing ratios from 1 to 500 ppmv (mole ratio, 10-6 mol mol-1) can be covered with an accuracy between 7 and 15 %. AIMS-H2O was deployed on two DLR research aircraft, the Falcon during CONCERT

  7. The airborne mass spectrometer AIMS - Part 1: AIMS-H2O for UTLS water vapor measurements

    NASA Astrophysics Data System (ADS)

    Kaufmann, Stefan; Voigt, Christiane; Jurkat, Tina; Thornberry, Troy; Fahey, David W.; Gao, Ru-Shan; Schlage, Romy; Schäuble, Dominik; Zöger, Martin

    2016-03-01

    -H2O was deployed on two DLR research aircraft, the Falcon during CONCERT (CONtrail and Cirrus ExpeRimenT) in 2011, and HALO during ML-CIRRUS (Mid-Latitude CIRRUS) in 2014. The comparison of AIMS-H2O with the SHARC tunable diode laser hygrometer during ML-CIRRUS shows a correlation near to 1 in the range between 10 and 500 ppmv for the entire campaign.

  8. Identification of Bacteria Synthesizing Ribosomal RNA in Response to Uranium Addition During Biostimulation at the Rifle, CO Integrated Field Research Site

    PubMed Central

    McGuinness, Lora R.; Wilkins, Michael J.; Williams, Kenneth H.; Long, Philip E.; Kerkhof, Lee J.

    2015-01-01

    Understanding which organisms are capable of reducing uranium at historically contaminated sites provides crucial information needed to evaluate treatment options and outcomes. One approach is determination of the bacteria which directly respond to uranium addition. In this study, uranium amendments were made to groundwater samples from a site of ongoing biostimulation with acetate. The active microbes in the planktonic phase were deduced by monitoring ribosomes production via RT-PCR. The results indicated several microorganisms were synthesizing ribosomes in proportion with uranium amendment up to 2 μM. Concentrations of U (VI) >2 μM were generally found to inhibit ribosome synthesis. Two active bacteria responding to uranium addition in the field were close relatives of Desulfobacter postgateii and Geobacter bemidjiensis. Since RNA content often increases with growth rate, our findings suggest it is possible to rapidly elucidate active bacteria responding to the addition of uranium in field samples and provides a more targeted approach to stimulate specific populations to enhance radionuclide reduction in contaminated sites. PMID:26382047

  9. [Social marketing--seduction with the aim of healthy behavior?].

    PubMed

    Loss, J; Nagel, E

    2010-01-01

    SOCIAL MARKETING - SEDUCTION WITH THE AIM OF HEALTHY BEHAVIOR? Social marketing is the use of marketing principles to design and implement programs that promote socially beneficial behaviour change. Contrary to the marketing of consumption goods, social marketing does not deal with material products, but with behaviour, e. g. not smoking. This 'product' has a basic benefit (i. e. reduction of health risks in the long run), which is, however, difficult to convey. Therefore, the intended change in behaviour has to be related to a further reward which consists of symbolic goods, e. g. social appreciation or a better body feeling. The communication policy is essential for information on and motivation for the preventive issue. Social marketing campaigns whose development and management follow the principles of classical marketing can render preventive efforts more effective. In addition, social marketing can lead to a better quality management as compared to conventional preventive activities. These advantages can be explained by a) tailoring the campaign more specifically to the target group's needs and motives, b) presenting health risks more convincingly, and c) continuously analysing and evaluating the campaign and its effects. On the other hand, the marketing of preventive aims through mass media can bear several risks, as exemplified by different national and international public health campaigns. The necessity to communicate briefly and succinctly can lead to misleading simplifications and, in case of cancer screening, to the trivialization of a behaviour's consequences and adverse effects. Also, many campaigns do not intend to educate and inform, but try to persuade target persons of a certain behaviour, using emotions such as fear. This has led to social marketing being criticized as manipulation. Sometimes, social marketing campaigns cause stigma and discrimination of certain population subgroups, e. g. obese or HIV-positive people. Health promoters who plan

  10. Improvements of AIMS D2DB matching for product patterns

    NASA Astrophysics Data System (ADS)

    Nishiguchi, Masaharu; Kanno, Koichi; Miyashita, Hiroyuki; Ohara, Kana; Son, Donghwan; Tolani, Vikram; Satake, Masaki

    2015-07-01

    AIMSTM is mainly used in photomask industry for verifying the print impact of mask defects on wafer CD in DUV lithography process. AIMS verification is typically used in D2D configuration, wherein two AIMS images, reference and defect, are captured and compared. Criticality of defects is then analyzed off these images using a number of criteria. As photomasks with aggressive OPC, sub-resolution assist features (SRAFs), and single-die are being routinely manufactured in production environment, it is required to improve cycle time through the AIMS step by saving time in searching for and capturing an adequate reference AIMS image. One solution is to use AIMS D2DB methodology which compares AIMS defect image with a reference image simulated from the corresponding mask design data. In general, such simulation needs calibration with the native images captured on the AIMS tool. In our previous paper we evaluated a calibration procedure directly using the defect AIMS image and compared the analysis results with a D2D capture using AIA (Aerial Image Analyzer) software product from Luminescent Technologies (now part of KLA-Tencor Corporation). The results showed that calibration using defect AIMS image does not influence AIMS judgment as long as the defect size is less than 100nm in case of typical basic patterns. When applying this methodology to product patterns, it was found that there were differences between reference AIMS image and simulation image. These differences influenced AIMS verification. Then new method to compensate would be needed. Our approach to compensate the difference between AIMS image and simulated image is examination with some factors likely to cause the difference.

  11. Contact aiming system of 2m laser automatic interferometric comparator

    NASA Astrophysics Data System (ADS)

    Sun, Shuanghua; Ye, Xiaoyou; Zou, Lingding; Gao, Hongtang; Gan, Xiaochuan; Shen, Xueping

    2013-01-01

    Composition and principle of 2m laser automatic interferometric comparator were introduced. A novel contact aiming system based on high precision inductance sensor was designed. The zero-cross trigger signal of inductance sensor output voltage was treated as the aiming signal. A rotating mechanism was designed and a segmental shifting motion control model was established. Two key problems, avoiding probe crash and aiming repeatability, were solved. The one dimension end standards such as gauge block, step gauge could be measured directly by this means. The data of test revealed that aiming repeatability was less than 0.2μm.

  12. Informatics in radiology: automated structured reporting of imaging findings using the AIM standard and XML.

    PubMed

    Zimmerman, Stefan L; Kim, Woojin; Boonn, William W

    2011-01-01

    Quantitative and descriptive imaging data are a vital component of the radiology report and are frequently of paramount importance to the ordering physician. Unfortunately, current methods of recording these data in the report are both inefficient and error prone. In addition, the free-text, unstructured format of a radiology report makes aggregate analysis of data from multiple reports difficult or even impossible without manual intervention. A structured reporting work flow has been developed that allows quantitative data created at an advanced imaging workstation to be seamlessly integrated into the radiology report with minimal radiologist intervention. As an intermediary step between the workstation and the reporting software, quantitative and descriptive data are converted into an extensible markup language (XML) file in a standardized format specified by the Annotation and Image Markup (AIM) project of the National Institutes of Health Cancer Biomedical Informatics Grid. The AIM standard was created to allow image annotation data to be stored in a uniform machine-readable format. These XML files containing imaging data can also be stored on a local database for data mining and analysis. This structured work flow solution has the potential to improve radiologist efficiency, reduce errors, and facilitate storage of quantitative and descriptive imaging data for research. PMID:21357413

  13. Critters: K-6 Life Science Activities. Project AIMS.

    ERIC Educational Resources Information Center

    Allen, Maureen Murphy; And Others

    Project AIMS (Activities to Integrate Mathematics and Science) has as its purpose the integration of subject matter in grades K-9. Field testing of the curriculum materials produced by AIMS indicates that this integration produces the following beneficial results: (1) mathematics becomes more meaningful, hence more useful; (2) science is…

  14. Soap Films and Bubbles, Grades 4-9. Project AIMS.

    ERIC Educational Resources Information Center

    Wiebe, Ann

    Project AIMS (Activities to Integrate Mathematics and Science) has as its purpose the integration of subject matter in grades K-9 on the premise that such integration enriches and makes learning meaningful and holistic. In fact, extensive field testing of the curriculum materials produced by AIMS has confirmed that integration produces the…

  15. Finding Your Bearings, Grades 4-9. Project AIMS.

    ERIC Educational Resources Information Center

    Wiebe, Ann

    Project AIMS (Activities to Integrate Mathematics and Science) has as its purpose the integration of subject matter in grades K-9 on the premise that such integration enriches and makes learning meaningful and holistic. In fact, extensive field testing of the curriculum materials produced by AIMS has confirmed that integration produces the…

  16. Schooling for Happiness: Rethinking the Aims of Education

    ERIC Educational Resources Information Center

    Cavanagh, Tom

    2008-01-01

    The release of "The New Zealand Curriculum" causes us to rethink the aims of education. Dr Cavanagh offers an alternative set of aims to the vision outlined in the Ministry of Education document, which is based, at least in part, on socialisation into the corporate industrial world. Dr Cavanagh's position is focused on putting relationships at the…

  17. Student Teachers' Attitude towards Twitter for Educational Aims

    ERIC Educational Resources Information Center

    Marín, Victoria I.; Tur, Gemma

    2014-01-01

    This paper presents an educational experience with 100 student teachers from different courses of the University of the Balearic Islands (Spain) in which Twitter is used for various different activities. The aim of this experiment was to explore student teachers' perceptions in order to value their attitude towards Twitter for educational aims.…

  18. Teaching Design Education for Cultural, Pedagogical, and Economic Aims

    ERIC Educational Resources Information Center

    Vande Zande, Robin

    2010-01-01

    The aims of educating for economic, cultural, and pedagogical purposes have existed since the early inception of art education. Looking at how and why these aims evolved in the early era of art and design education has potential for better understanding how and why design should be incorporated into the art education curricula today. This article…

  19. The Aims of Education and the Leap of Freedom

    ERIC Educational Resources Information Center

    Yun, SunInn

    2014-01-01

    This paper considers the place of freedom in discussions of the aims of education. Bearing in mind remarks of R.S. Peters to the affect that the singling out of aims can "fall into the hands of rationalistically minded curriculum planners", it begins by considering the views of Roland Reichenbach regarding Bildung and his account of this…

  20. An Analysis of Aims and the Educational "Event"

    ERIC Educational Resources Information Center

    den Heyer, Kent

    2015-01-01

    In this article, the author explores key distinctions relevant to aims talk in education. He argues that present formulations of aims fail to adequately capture or speak to several overlapping domains involved in schooling: qualification, socialization, and the educational in the form of subjectification (Biesta, 2010). Drawing off Egan and Biesta…

  1. Patriotism, History and the Legitimate Aims of American Education

    ERIC Educational Resources Information Center

    Merry, Michael S.

    2009-01-01

    This article argues that while an attachment to one's country is both natural and even partially justifiable, cultivating loyal patriotism in schools is untenable insofar as it conflicts with the legitimate aims of education. These aims include the epistemological competence necessary for ascertaining important truths germane to the various…

  2. Using Set Model for Learning Addition of Integers

    ERIC Educational Resources Information Center

    Lestari, Umi Puji; Putri, Ratu Ilma Indra; Hartono, Yusuf

    2015-01-01

    This study aims to investigate how set model can help students' understanding of addition of integers in fourth grade. The study has been carried out to 23 students and a teacher of IVC SD Iba Palembang in January 2015. This study is a design research that also promotes PMRI as the underlying design context and activity. Results showed that the…

  3. Nisin Production Utilizing Skimmed Milk Aiming to Reduce Process Cost

    NASA Astrophysics Data System (ADS)

    Jozala, Angela Faustino; de Andrade, Maura Sayuri; de Arauz, Luciana Juncioni; Pessoa, Adalberto; Penna, Thereza Christina Vessoni

    Nisin is a natural additive for conservation of food, pharmaceutical, and dental products and can be used as a therapeutic agent. Nisin inhibits the outgrowth of spores, the growth of a variety of Gram-positive and Gram-negative bacteria. This study was performed to optimize large-scale nisin production in skimmed milk and subproducts aiming at low-costs process and stimulating its utilization. Lactococcus lactis American Type Culture Collection (ATCC) 11454 was developed in a rotary shaker (30°C/36 h/100 rpm) in diluted skimmed milk and nisin activity, growth parameters, and media components were also studied. Nisin activity in growth media was expressed in arbitrary units (AU/mL) and converted to standard nisin concentration (Nisaplin®, 25 mg of pure nisin is 1.0×106 AU/mL). Nisin activity in skimmed milk 2.27 gtotal solids was up to threefold higher than transfers in skimmed milk 4.54 gtotal solids and was up to 85-fold higher than transfers in skimmed milk 1.14 gtotal solids. L. lactis was assayed in a New Brunswick fermentor with 1.5 L of diluted skimmed milk (2.27 gtotal solids) and airflow of 1.5 mL/min (30°C/36/200 rpm), without pH control. In this condition nisin activity was observed after 4 h (45.07 AU/mL) and in the end of 36 h process (3312.07 AU/mL). This work shows the utilization of a low-cost growth medium (diluted skimmed milk) to nisin production with wide applications. Furthermore, milk subproducts (milk whey) can be exploited in nisin production, because in Brazil 50% of milk whey is disposed with no treatment in rivers and because of high organic matter concentrations it is considered an important pollutant. In this particular case an optimized production of an antimicrobial would be lined up with industrial disposal recycling.

  4. Internet Use with Learning Aim: Views of German Language Pre-Service Teachers

    ERIC Educational Resources Information Center

    Yucel, Mukadder Seyhan

    2011-01-01

    The aim of this study is to indicate the views of teacher candidates of German Language Department at Education Faculty, Trakya University about the use of internet with the aim of learning. This study was designed as phenomenology which is one of the qualitative research methods. The study data were obtained via semi-constructed interview…

  5. Parents' Views Regarding the Values Aimed to be Taught in Social Studies Lessons

    ERIC Educational Resources Information Center

    Tay, Bayram; Yildirim, Kasim

    2009-01-01

    This study aimed at learning parents' ideas about the values aimed to be taught in Social Studies lessons in the 4th and 5th grades of the primary education and about values education. Study data were collected by administering "the Values Education I" and "Values Education II" questionnaire forms developed by the researchers. The views of 378 and…

  6. Aiming at Targets: The Autobiography of Robert C. Seamans, Jr.

    NASA Technical Reports Server (NTRS)

    Seamans, Robert C., Jr.

    1996-01-01

    Bob Seamans originally was inspired to write this book for his family and friends. That is a large audience. By his own count his immediate family numbers twenty-four, not counting brothers and cousins and their families. His friends are uncounted but surely run to hundreds. As one of them and as a colleague at NASA, I am pleased and honored that he asked me to write this foreword. While written in Bob's unique and informal style, this autobiography has significance for many readers beyond his large circles of family and friends. Leaders and students of large, complex technological endeavors should be able to learn much from reading how Bob faced the daunting technical and management challenges in his career. As the title of this book implies, Bob has always set high goals for himself and then kept his eyes focused on both the necessary details and the broader picture. His ability to shift smoothly among jobs that required seemingly disparate abilities and skills speaks volumes about his insight, dedication, and enthusiasm for achievement. The book spans a truly remarkable life story. Bob first takes us through his growing up, education, and early professional and family life. Next he focuses on the crucial years when he was the general manager of NASA. Then he moves on to his career in the top jobs at the Air Force, the National Academy of Engineering, and the Energy Research and Development Administration. Finally, he touches on his later leadership activities in the academic and business worlds. Aiming at Targets is a series of fascinating topical vignettes covering his professional life. Taken together, like broad brushstrokes in an impressionist painting, they give a better picture of Bob Seamans and his work than a detailed recitation of facts and dates could hope to do. This is a cheerful account of an interesting and successful career. The book is full of good stories, with many memorable characters. Like the proverbial sundial, it counts the sunny hours

  7. Partnership's First Product Aimed at Middle School Vocabulary

    ERIC Educational Resources Information Center

    Viadero, Debra

    2009-01-01

    When researchers from the Strategic Education Research Partnership (SERP) met with Boston secondary school teachers three years ago, the teachers told them they had a problem. Students struggled to understand their textbook lessons because they continually tripped up on--or glossed over--the academic words they came across. The researchers'…

  8. 121. Man with temperature probe aimed at armature measuring temperature ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    121. Man with temperature probe aimed at armature measuring temperature as armature heats up between the two electrodes. March 27, 1985 - Statue of Liberty, Liberty Island, Manhattan, New York County, NY

  9. Movement strategies in vertical aiming of older adults.

    PubMed

    Bennett, Simon J; Elliott, Digby; Rodacki, Andre

    2012-02-01

    The current study examined the movement kinematics of older adults when aiming to vertically oriented targets. Late middle-age and early old-age participants completed 20 trials to a small target located downward or upward by 0.16 m from a home position at shoulder height. Aiming direction had a significant effect, resulting in more submovements, which were mostly reflective of undershooting when aiming to the downward compared to upward target. In trials containing a submovement, both groups exhibited shorter total movement time, concomitant with a decrease in duration of the primary movement and an increase in submovement amplitude, when aiming to the downward target. Measures of dispersion also differed in accord with the amplitude of submovements, such that there was greater spatial and temporal variability in the primary movement when aiming in the downward direction. While there was limited evidence of a difference between the groups, there were significant correlations between age and several dependent measures when aiming to the downward target. Of note, in trials containing submovements, older participants exhibited larger amplitude and longer duration submovements, as well as shorter amplitude primary movement. Spatial variability at peak velocity also increased as a function of age when aiming downward, but not in trials without submovements. An explanation related to physical limits on movement production is discounted given the lack of consistent findings between trial types. Instead, we suggest older participants' exhibit strategic differences in movement kinematics when aiming to vertically located targets, and that these change progressively with age in order to maintain speed-accuracy relations. PMID:22116400

  10. Ethics and aims in psychotherapy: a contribution from Kant.

    PubMed Central

    Callender, J S

    1998-01-01

    Psychotherapy is an activity which takes many forms and which has many aims. The present paper argues that it can be viewed as a form of moral suasion. Kant's concepts of free will and ethics are described and these are then applied to the processes and outcome of psychotherapy. It is argued that his ideas, by linking rationality, free will and ethics into a single philosophical system, offer a valuable theoretical framework for thinking about aims and ethical issues in psychotherapy. PMID:9752632

  11. Real-Time Estimation Of Aiming Error Of Spinning Antenna

    NASA Technical Reports Server (NTRS)

    Dolinsky, Shlomo

    1992-01-01

    Spinning-spacecraft dynamics and amplitude variations in communications links studied from received-signal fluctuations. Mathematical model and associated analysis procedure provide real-time estimates of aiming error of remote rotating transmitting antenna radiating constant power in narrow, pencillike beam from spinning platform, and current amplitude of received signal. Estimates useful in analyzing and enhancing calibration of communication system, and in analyzing complicated dynamic effects in spinning platform and antenna-aiming mechanism.

  12. Research.

    ERIC Educational Resources Information Center

    Bracey, Gerald W.

    1984-01-01

    This potpourri surveys research on various topics: neurologically based curricula, midafternoon slumps in student attention, accounting for contexts in research, feelings of powerlessness among students and teachers, further equity implications of computers in schools, misreporting of research findings, and accounting for media transfer in…

  13. Provider Burnout and Patient Engagement: The Quadruple and Quintuple Aims.

    PubMed

    Epperson, William Jackson; Childs, Susan Fink; Wilhoit, Gordon

    2016-01-01

    The Triple Aim has become the guiding light and benchmark by which healthcare organizations plan their future efforts. It has been adopted into healthcare policies with little regard for including the skill sets of compassion and emotional intelligence. The multiple increasing demands on providers of healthcare are unsustainable and will cripple the system, resulting in outcomes that are counter to the Triple Aim goals. Patient engagement with shared decision-making should become the primary focus of care delivery. New delivery models and care plans are unaffordable to far too many patients and payers, despite the efforts of futurists who seek to advance quality and lower costs. Clinical care delivery and patient engagement efforts must be drastically redirected to innovative and sustainable value-based delivery models that support the goals of the Triple Aim. PMID:27443059

  14. Head-aimed vision system improves tele-operated mobility

    NASA Astrophysics Data System (ADS)

    Massey, Kent

    2004-12-01

    A head-aimed vision system greatly improves the situational awareness and decision speed for tele-operations of mobile robots. With head-aimed vision, the tele-operator wears a head-mounted display and a small three axis head-position measuring device. Wherever the operator looks, the remote sensing system "looks". When the system is properly designed, the operator's occipital lobes are "fooled" into believing that the operator is actually on the remote robot. The result is at least a doubling of: situational awareness, threat identification speed, and target tracking ability. Proper system design must take into account: precisely matching fields of view; optical gain; and latency below 100 milliseconds. When properly designed, a head-aimed system does not cause nausea, even with prolonged use.

  15. Curricular Aims: Assessment of a University Capstone Course

    ERIC Educational Resources Information Center

    Benton-Kupper, Jodi; Brooks, Randy; Slayton, Deborah

    2004-01-01

    This paper shares research findings about Millikin University's University Capstone, which is the culminating general education course for all seniors. Results of the research discuss the extent to which key elements of the university's curriculum were perceived by students as integrated into this course, compared to courses in the major.

  16. The Aims of Sex Education: Demoting Autonomy and Promoting Mutuality

    ERIC Educational Resources Information Center

    McAvoy, Paula

    2013-01-01

    In this essay, Paula McAvoy critiques a commonly held view that teaching young people to be good choice makers should be a central aim of sex education. Specifically, she argues against David Archard's recommendation that sex educators ought to focus on the development of autonomy and teaching young people that "choice should be accorded…

  17. MayDay Colloquium 24: The Aims of Music Education

    ERIC Educational Resources Information Center

    Elliott, David J.

    2013-01-01

    On June 20, 2012, Professor John Kratus welcomed the MayDay Group to Michigan State University for "Colloquium 24: The Aims of Music Education". On behalf of all members of the Mayday Group, the author wishes to extend his deepest gratitude to Professor Kratus and his colleagues at Michigan State for their extremely gracious and…

  18. The General Aims of Educational Development -- A Comparative Prospect.

    ERIC Educational Resources Information Center

    Dahawy, Bayoumi Mohamed

    The inconsistency between norms prescribed by international agencies and the educational strategies suggested to put these norms into practice has created problems as is evident in the case studies of India and Egypt and the general aims of educational development in these two countries. In Egypt a policy of basic education had the support of…

  19. R. S. Peters' Normative Conception of Education and Educational Aims

    ERIC Educational Resources Information Center

    Katz, Michael S.

    2009-01-01

    This article aims to highlight why R. S. Peters' conceptual analysis of "education" was such an important contribution to the normative field of philosophy of education. In the article, I do the following: 1) explicate Peters' conception of philosophy of education as a field of philosophy and explain his approach to the philosophical analysis of…

  20. Why the Aims of Education Cannot Be Settled

    ERIC Educational Resources Information Center

    Hardarson, Atli

    2012-01-01

    The dominant model of curriculum design in the last century assumed that school education could be organized around aims, defined primarily in terms of students' behaviour. The credentials of this model were questioned by, among others, Lawrence Stenhouse, who pointed out that education serves purposes that cannot be stated in terms of behavioural…

  1. An "Aims of Discourse" Program for Freshman English.

    ERIC Educational Resources Information Center

    McCleary, William J.

    Genesee Community College in Batavia, New York, adopted James Kinneavy's aims of discourse theory as the basis of its composition program. The program is a two-semester course for students who intend to transfer to four-year colleges. In a comparable nontransfer sequence, the first semester doubles as a remedial course for ill-prepared transfer…

  2. Initiative Aims to Refashion Training Path for Principals

    ERIC Educational Resources Information Center

    Aarons, Dakarai I.

    2010-01-01

    A new nationwide leadership initiative launched last week is aimed at changing the way America's principals are recruited and prepared--and how they run schools. The Alliance to Reform Education Leadership, or AREL, marks the first major effort of the nonpartisan George W. Bush Institute, located at Southern Methodist University in Dallas. It will…

  3. An Examination of OMB Forms Clearance Aims, Policies and Procedures.

    ERIC Educational Resources Information Center

    Coan, Donald L.; Bertram, Charles L.

    The purposes of this paper are four-fold: (1) to delineate the principal aims and policy objectives of Office of Management and Budget Forms Clearance (OMB FC), as embodied in Federal legislation and executive directives since 1942; (2) to identify the major current thrusts of OMB FC; (3) to suggest possible future policy directions of OMB FC,…

  4. Aims College Operation Bridge Project. Phase 1, Preliminary Evaluation Report.

    ERIC Educational Resources Information Center

    National Spanish Speaking Management Association, Washington, DC.

    Recognizing the adverse effects of poverty on Mexican Americans, and determined to help narrow the barriers caused by a low socioeconomic status, Aims college, a locally funded institution in Weld County, Colorado, conceptualized and implemented a special needs program designed to provide vocational and occupational training for disadvantaged…

  5. Comment on "Schooling for Happiness: Rethinking the Aims of Education"

    ERIC Educational Resources Information Center

    Glynn, Ted

    2008-01-01

    This commentary presents the author's response to an article published in the last version of "Kairaranga" entitled "Schooling for Happiness: Rethinking the aims of education," written by Dr. Tom Cavanagh. He found it refreshing to read Cavanagh's article that focuses educators' energies onto re-visiting the wider socio-cultural goals of…

  6. AZ State Profile. Arizona: Arizona's Instrument to Measure Standards (AIMS)

    ERIC Educational Resources Information Center

    Center on Education Policy, 2010

    2010-01-01

    This paper provides information about the Arizona's Instrument to Measure Standards (AIMS). The purpose of the test is to determine prospective high school graduates' mastery of the state curriculum and to meet a state mandate. [For the main report, "State High School Tests: Exit Exams and Other Assessments", see ED514155.

  7. Alienation, Art and Affirmation in the Work of Aime Cesaire.

    ERIC Educational Resources Information Center

    Buzash, Michael D.

    Aime Cesaire is one of the foremost French-speaking blacks in twentieth century literature. The concept of negritude--referring to the culture of French-speaking blacks--is often associated with his name. This paper discusses his life and work, and explores his life from his birth in Martinique, his early years, the years spent in Paris, and his…

  8. Autonomy as the Guiding Aim of Entrepreneurship Education

    ERIC Educational Resources Information Center

    van Gelderen, Marco

    2010-01-01

    Purpose: This paper has three purposes: first, to present a vision of entrepreneurship education that has the student's capacity for autonomous action as its ultimate aim; second, to convince the reader of the timeliness and relevance of such an approach; third, to outline how this can be implemented. Design/methodology/approach: The paper…

  9. Research.

    ERIC Educational Resources Information Center

    Raudenbush, Stephen

    In May of 1999, the American Academy of Arts and Sciences hosted a conference on ways to improve the scientific quality of educational research. In medicine, thanks to work 40 years ago by 2 researchers, Howard Hyatt and Frederick Mosteller, the commitment of medical professionals to base their diagnoses and prescriptions on clinical trials in…

  10. Strategic Clinical Networks: Alberta's Response to Triple Aim.

    PubMed

    Noseworthy, Tom; Wasylak, Tracy; O'Neill, Blair J

    2016-01-01

    Verma and Bhatia make a compelling case for the Triple Aim to promote health system innovation and sustainability. We concur. Moreover, the authors offer a useful categorization of policies and actions to advance the Triple Aim under the "classic functions" of financing, stewardship and resource generation (Verma and Bhatia 2016). The argument is tendered that provincial governments should embrace the Triple Aim in the absence of federal government leadership, noting that, by international standards, we are at best mediocre and, more realistically, fighting for the bottom in comparative, annual cross-country surveys. Ignoring federal government participation in Medicare and resorting solely to provincial leadership seems to make sense for the purposes of this discourse; but, it makes no sense at all if we are attempting to achieve high performance in Canada's non-system (Canada Health Action: Building on the Legacy 1997; Commission on the Future of Health Care in Canada 2002; Lewis 2015). As for enlisting provincial governments, we heartily agree. A great deal can be accomplished by the Council of the Federation of Canadian Premiers. But, the entire basis for this philosophy and the reference paper itself assumes a top-down approach to policy and practice. That is what we are trying to change in Alberta and we next discuss. Bottom-up clinically led change, driven by measurement and evidence, has to meet with the top-down approach being presented and widely practiced. While true for each category of financing, stewardship and resource generation, in no place is this truer than what is described and included in "health system stewardship." This commentary draws from Verma and Bhatia (2016) and demonstrates how Alberta, through the use of Strategic Clinical Networks (SCNs), is responding to the Triple Aim. We offer three examples of provincially scaled innovations, each representing one or more arms of the Triple Aim. PMID:27009587

  11. States with the Biggest Deficits Take Aim at Higher Education.

    ERIC Educational Resources Information Center

    Selingo, Jeffrey

    2002-01-01

    Describes how lawmakers in cash-strapped states--including California, Wisconsin, and Tennessee--are forcing public colleges into hiring freezes, tuition increases, and even cuts in research designed to spur economic development. (EV)

  12. [Aiming at the chest, but hitting the back].

    PubMed

    Zech, Wolf-Dieter; Axmann, Stefan; Siegenthaler, Lea; Kneubühl, Beat; Thali, Michael

    2011-01-01

    Gunshot injuries in the back may suggest the unjustified use of firearms. A wound in the back inflicted by a firearm should not automatically imply that the shooter aimed at the back. A previous study demonstrated that it is possible for men to turn their trunk faster than it takes for a shooter to fire or throw a hand-operated weapon. With a high speed motion camera the authors were able to demonstrate that it is also possible for women to turn their trunk fast enough, so that a shot in the back could have been aimed at the front of the body. This conclusion is also likely to apply to hand-operated or thrown weapons, since the velocity of their projectiles is considerably lower than that of firearms. PMID:22039696

  13. A methodology aimed to guarantee technology continuity in health structures.

    PubMed

    Miniati, R; Dori, F; Iadanza, E; Scatizzi, L; Niccolini, F; Sarti, A

    2011-01-01

    In healthcare the importance of clinical continuity is essential for both patients life and health organization activity. Since technology continuity is having more and more importance for the service continuity, a correct management of medical devices must be guided by criteria that ensure its safe, appropriate and economical use through a well planned purchase, appropriate preventive and corrective maintenance Indeed, the aim of health technology managers is to optimize the integration of external interventions assistance and internal technical service to guarantee an efficient and cost-effective maintenance system. This paper proposes an innovative carefully thought methodology which is aimed to provide technological and procedural actions which offer support to decision makers in technology management regarding the implementation of continuity in medical services and response to technology failures and emergency events. PMID:22254534

  14. Triple AIM evaluation and application in advanced node

    NASA Astrophysics Data System (ADS)

    Wang, Gary C.; Lio, En Chuan; Hung, Yuting; Chen, Charlie; Wang, Sybil; Weng, Tang Chun; Lin, Bill; Yu, Chun Chi

    2016-03-01

    A novel method on advanced node for IBO (Image Based Overlay) data extraction accuracy is demonstrated in this work, and here some special design in triple-AIM (Advanced Imaging Metrology) is able to realize the approach. Since triple AIM design has 3 locations left for patterning layers insertion, a new design with 2 layers locations, location-A (inner) and location-B (middle), are generated by 1st pattering, i.e. once lithography exposure, and the 2 marks grouping are formed on dielectric through lithography and etching process with a predetermined overlay "zero offset" through original mask layout design, as illustrated in Fig. (1). And then, as following top photo resist layer, assumed location-C (outer), lithography patterning process, PR coating, exposure and development complete, full triple-AIM patterns is generated, and 3 sets of overlay data could be obtained, A to B, C to B, C to A. Through re-calculating the overlay raw data of current (2nd patterning layer) to previous (1st patterning layer) layer by averaging [C to B] and [C to A], then theoretically the data extraction of sites would be more accuracy, since the variation of local marks signal, induced by inline process instability, could be minimized through the raw data averaging procedure. Moreover, from raw data [A to B], an extra monitor function for detections of the inline process variation, marks selection and recipe setting optimization could be obtained, since marks in [A] and [BB] locations are both generated in 1st patterning, and with the target "zero". So if the raw data [A to BB] is bigger or smaller than "zero" in some degree, there should be some process issue or marks condition setting error in triple-AIM design.

  15. Environmentally friendly batteries by addition of chitin

    NASA Astrophysics Data System (ADS)

    Campanella, L.; Dragone, R.; Grossi, R.; Meo, A. E.; Visco, G.

    2003-05-01

    In this paper we describe the results of a research performed on pen alkaline-manganese batteries with the aim of checking the possibility of minimizing the release of metals from them when, exhausted, are disposed. This goal was temptatively looked for on inserting in the batteries a certain amount of chitin able to bind the metal ions formed by the natural oxidation of the metals contained in the batteries and by the acid rain dissolving action. The obtained results show that 1.2 g of chitin for each middle size pen model alkaline-manganese battery practically prevent any release of metals, without relevant change of the discharge curve of the battery. The effect of the addition is particularly marked if realised by thé additive as contained in a PVC membrane.

  16. Refractive aiming corrections for satellite observation of stars

    SciTech Connect

    Vittitoe, C.N.; Schmidt, R.L.

    1997-03-01

    Standard references describe how apparent zenith angles differ from true zenith angles for observers on the Earth. In fact, correction formulae are available for aiming Earth-based sensors at stars; some corrections give variations as a function of observer altitude. Such corrections have not been available for observers in space. This report develops formulae appropriate for proper aiming from space-based sensors toward the relatively few stars that are near the Earth`s limb at any given time. These formulae correct for refractive effects and may be critical for steerable space-borne sensors with fields of view less than one degree, tasked to observe starlight passing near the Earth`s surface. Ray tracing in the U.S. Standard Atmosphere, 1976 including H{sub 2}O effects, is used to determine relations between the refracted tangent height, the apparent tangent height resulting from observation at the sensor, and the angle through which the detected rays have deviated. Analytic fits of the ray deviation as a function of apparent tangent height allows quick determination of corrections needed for a space-borne sensor. Using those results that apply in the plane of incidence and using the necessary coordinate rotations, alterations in the star`s apparent right ascension and declination are evaluated to improve the aim. Examples illustrate that alterations can be larger than one degree, with effects lasting up to a few minutes.

  17. An aiming device for an extraoral radiographic technique.

    PubMed

    Chen, Chia-Hui; Lin, Shui-Hui; Chiu, Hui-Lin; Lin, Yu-Ju; Chen, Yuk-Kwan; Lin, Li-Min

    2007-06-01

    To assist certain patient populations who are unable to tolerate intraoral films and/or sensors during endodontic therapy, an alternative technique (extraoral film placement) has been innovated by Newman and Friedman (2003). In this study, we devise and test a film/sensor-beam alignment aiming device for taking a periapical radiograph using this extraoral radiographic technique. An instrument is assembled from the following components: (1) two locator rings for bite-wing radiography, (2) two metal supporting indicator rods for bite-wing radiography, (3) a bite block for horizontal bite-wing radiography, and (4) a rubber tube of about 2 cm in length. Using our newly-devised aiming device to take periapical radiographs using the extraoral technique, appropriate images of the left upper and right lower molar areas for a series of 12 adult volunteers were successfully obtained. Angulation of the x-ray cone, with reference to the horizontal plane, was -20 degrees to -30 degrees and -10 degrees to -15 degrees for the upper and lower teeth, respectively. This study therefore shows that appropriate images can be easily obtained using this aiming device. PMID:17509422

  18. Electrostatic steering and beamlet aiming in large neutral beam injectors

    SciTech Connect

    Veltri, P. Chitarin, G.; Marcuzzi, D.; Sartori, E.; Serianni, G.; Sonato, P.; Cavenago, M.

    2015-04-08

    Neutral beam injection is the main method for plasma heating in magnetic confinement fusion devices. In high energy injector (E>100 keV/amu), neutrals are obtained with reasonable efficiency by conversion of negative ions (H- or D-) via electron detachment reactions. In the case of ITER injectors, which shall operate at 1 MeV, a total ion current of ∼ 40 A is required to satisfy the heating power demand. Gridded electrodes are therefore used in the accelerator, so that 1280 negative ion beamlets are accelerated together. A carefully designed aiming system is required to control the beamlet trajectories, and to deliver their power on a focal point located several meters away from the beam source. In nowadays injectors, the aiming is typically obtained by aperture offset technique or by grid shaping. This paper discuss an alternative concept of beamlets aiming, based on an electrostatic ”steerer” to be placed at the end of the accelerator. A feasibility study of this component is also presented, and its main advantages and drawbacks with respect to other methods are discussed.

  19. Mathematical literacy in Plant Physiology undergraduates: results of interventions aimed at improving students' performance

    NASA Astrophysics Data System (ADS)

    Vila, Francisca; Sanz, Amparo

    2013-09-01

    The importance of mathematical literacy in any scientific career is widely recognized. However, various studies report lack of numeracy and mathematical literacy in students from various countries. In the present work, we present a detailed study of the mathematical literacy of Spanish undergraduate students of Biology enrolled in a Plant Physiology course. We have performed individual analyses of results obtained during the period 2000-2011, for questions in the examinations requiring and not requiring mathematical skills. Additionally, we present the outcome of two interventions introduced with the aim of helping students improve their prospects for success in the course. Our results confirm previous research showing students' deficiencies in mathematical skills. However, the scores obtained for mathematical questions in the examinations are good predictors of the final grades attained in Plant Physiology, as there are strong correlations at the individual level between results for questions requiring and not requiring mathematical skills. The introduction of a laboratory session devoted to strengthening the application of students' previously acquired mathematical knowledge did not change significantly the results obtained for mathematical questions. Since mathematical abilities of students entering university have declined in recent years, this intervention may have helped to maintain students' performance to a level comparable to that of previous years. The outcome of self-assessment online tests indicates that although Mathematics anxiety is lower than during examinations, the poor results obtained for questions requiring mathematical skills are, at least in part, due to a lack of self-efficacy.

  20. Research

    SciTech Connect

    1999-10-01

    Subjects covered in this section are: (1) PCAST panel promotes energy research cooperation; (2) Letter issued by ANS urges funding balance in FFTF restart consideration and (3) FESAC panel releases report on priorities and balance.

  1. Research

    ERIC Educational Resources Information Center

    Mathematics Teaching, 1973

    1973-01-01

    Implications for teachers from Piagetian-oriented piagetian-oriented research on problem solving reported in an article by Eleanor Duckworth are presented. Edward de Bono's Children Solve Problems,'' a collection of examples, is also discussed. (MS)

  2. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  3. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  4. Scheme aims to ensure students become competent practitioners.

    PubMed

    Walsh, Kirsty

    2015-08-26

    Thank you for publishing my article on the programme that Central Manchester NHS Foundation Trust has developed to provide additional preparatory support to enable third-year nursing and midwifery students to become competent practitioners, at the point of registration (careers, August 19). However, there were some changes made during editing that I would like to correct. PMID:26307314

  5. Use of the argon aiming beam in visual function testing.

    PubMed

    Kelley, J S

    1978-12-01

    The aiming beam of the argon laser photocoagulator can be a useful tool in visual function testing. Applied with the slit lamp delivery system and fundus contact lens, it clearly documents the size of the blind spot surrounding the optic nerve head and the normal area of nonfunctional retina in the periphery. The size of pathologic field defects can be recorded on fundus photographs or retinal drawings by an observer. Safety precautions must be taken to protect all patients from excessive laser energy. PMID:736394

  6. Please Don't Aim for a Highly Cited Paper

    ERIC Educational Resources Information Center

    Calver, Michael C.

    2015-01-01

    Citation-based metrics are important in determining careers, so it is unsurprising that recent publications advise prospective authors on how to write highly cited papers. While such publications offer excellent advice on structuring and presenting manuscripts, there are significant downsides, including: restrictions in the topics researched,…

  7. Meeting the Aims of Honors in the Online Environment

    ERIC Educational Resources Information Center

    Johnson, Melissa L.

    2013-01-01

    While little data-based research is available on the use of technology in the honors classroom, data on the nature of online honors courses are even rarer. In undergraduate education generally, enrollment in online courses has been increasing annually, outpacing enrollment in traditional, face-to-face environments. During fall 2011, more than 6.7…

  8. Creating a Reconciliatory Discourse on the Diverse Aims of Education.

    ERIC Educational Resources Information Center

    LePage, Pamela; Sockett, Hugh

    This paper develops a moral approach to educational controversy, examining a collaborative research project that promotes reconciliation between diverse perspectives and laying out the foundations of a reconciliatory discourse. Section 1 discusses problems in education that contribute to unproductive discourse (conflict of educational purposes,…

  9. Aim for 55-Day Dry Period for Top Production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The research cited in this article determined the optimal dry period length (the number of days between lactations when a cow is not being milked) for US Jersey cows using traits such as milk, fat, and protein yield, fat and protein percentages, somatic cell score, and days open. This was accomplis...

  10. The Seeds of Artificial Intelligence. SUMEX-AIM.

    ERIC Educational Resources Information Center

    Research Resources Information Center, Rockville, MD.

    Written to provide an understanding of the broad base of information on which the artificial intelligence (AI) branch of computer science rests, this publication presents a general view of AI, the concepts from which it evolved, its current abilities, and its promise for research. The focus is on a community of projects that use the SUMEX-AIM…

  11. Systematic Reviews of Research in Education: Aims, Myths and Multiple Methods

    ERIC Educational Resources Information Center

    Gough, David; Thomas, James

    2016-01-01

    Systematic reviews are still a controversial topic in some quarters, with the arguments for and against their use being well-rehearsed. In an attempt to advance a more nuanced approach to thinking about systematic reviewing, this paper illustrates the wide range of theoretical perspectives, methodologies and purposes that underpin the vast range…

  12. Nutrition education aimed at toddlers: an intervention study.

    PubMed

    Horodynski, Mildred A; Stommel, Manfred

    2005-01-01

    Weight problems in children are increasing at an alarming rate, especially among low-income populations. This concern requires effective strategies to promote healthy eating. A quasi-experiment was used to assess the effectiveness of an intervention, Nutrition Education Aimed at Toddlers (NEAT), aimed at enhancing parent-toddler feeding practices. The NEAT intervention comprises four nutrition lessons and structured reinforcements over 6 months. A convenience sample of 135 low-income families participated in the study up to the first data collection wave. Complete data were available for 43 parent-toddler dyads in the intervention and 53 dyads in the control group. The results show that, compared to the controls, caregivers exposed to the intervention had significantly higher knowledge scores concerning toddler feedings. No statistically significant differences were found for measures of child and parent mealtime behaviors. Because it is generally easier to change knowledge than actual behaviors, our study results demonstrate the need to focus on other avenues to enhance parents' ability to feed toddlers appropriately. PMID:16295151

  13. Telescope aiming point tracking method for bioptic driving surveillance.

    PubMed

    Fu, Xianping; Luo, Gang; Peli, Eli

    2010-12-01

    A bioptic telescope is a visual aid used by people with impaired vision when driving in many U.S. states, though bioptic driving remains controversial. Objective data on how and when bioptic drivers use the telescope and what they look at with it are crucial to understanding the bioptic telescope's effects on driving. A video-based technique to track the telescope's aiming point is presented in this paper. With three infrared retro-reflective markers pasted on the bioptic spectacles frame, its movement is recorded using an infrared camera unit with infrared LED illuminators. The angles formed by the three markers are used to calculate the telescope's aiming points, which are registered with road scene images recorded by another camera. The calculation is based on a novel one-time calibration method, in which the light spot from a head-mounted laser pointer projected on a wall while the scanning is recorded by the scene camera, in synchronization with the infrared camera. Interpolation is performed within small local regions where no samples were taken. Thus, nonlinear interpolation error can be minimized, even for wide-range tracking. Experiments demonstrated that the average error over a 70(°)×48(°) field was only 0.86 (°) , with lateral head movement allowed. PMID:20529756

  14. Benchmark integration test for the Advanced Integration Matrix (AIM)

    NASA Astrophysics Data System (ADS)

    Paul, H.; Labuda, L.

    The Advanced Integration Matrix (AIM) studies and solves systems-level integration issues for exploration missions beyond Low Earth Orbit (LEO) through the design and development of a ground-based facility for developing revolutionary integrated systems for joint human-robotic missions. This systems integration approach to addressing human capability barriers will yield validation of advanced concepts and technologies, establish baselines for further development, and help identify opportunities for system-level breakthroughs. Early ground-based testing of mission capability will identify successful system implementations and operations, hidden risks and hazards, unexpected system and operations interactions, mission mass and operational savings, and can evaluate solutions to requirements-driving questions; all of which will enable NASA to develop more effective, lower risk systems and more reliable cost estimates for future missions. This paper describes the first in the series of integration tests proposed for AIM (the Benchmark Test) which will bring in partners and technology, evaluate the study processes of the project, and develop metrics for success.

  15. Breaks in Play: Do They Achieve Intended Aims?

    PubMed

    Blaszczynski, Alexander; Cowley, Elizabeth; Anthony, Christina; Hinsley, Kate

    2016-06-01

    Breaks in play represent a responsible gambling strategy designed to disrupt states of dissociation and enhance the likelihood of drawing attention to a player's session behaviour and expenditure with respect to time and money. The aim of the break in play is to motivate the player to modify or cease gambling so the activity remains within affordable levels. The aim of this study was to investigate whether imposed breaks in play in the absence of accompanying warning messages were effective in reducing cravings. Participants (141 university students) were randomly allocated to one of three conditions: 15 min computer simulated Black Jack play followed by no break, a 3 or 8 min break in play. Participants were administered a battery of measures to assess problem gambling card play, cravings, and dissociation to assess the effects of length of break on cravings. Results indicated that cravings increased rather than decreased with imposed breaks in play, and that the strength of cravings were higher following the eight- compared to 3-min break. It was concluded that breaks in play in isolation might produce counterproductive, unintended, and even perverse effects. The policy implications for responsible gambling strategies is that breaks in play ought to be accompanied with warning and/or personal appraisal messages if optimal effects in reducing within session gambling expenditure are to be achieved. PMID:26275785

  16. IR technology for enhanced force protection by AIM

    NASA Astrophysics Data System (ADS)

    Breiter, R.; Ihle, T.; Rode, W.; Wendler, J.; Rühlich, I.; Haiml, M.; Ziegler, J.

    2008-04-01

    In all recent missions our forces are faced with various types of asymmetric threads like snipers, IEDs, RPGs or MANPADS. 2 nd and 3 rd Gen IR technology is a backbone of modern force protection by providing situational awareness and accurate target engagement at day/night. 3 rd Gen sensors are developed for thread warning capabilities by use of spectral or spatial information. The progress on a dual-color IR module is discussed in a separate paper [1]. A 1024x256 SWIR array with flexure bearing compressor and pulse tube cold finger provides > 50,000h lifetime for space or airborne hyperspectral imaging in pushbroom geometry with 256 spectral channels for improved change detection and remote sensing of IEDs or chemical agents. Similar concepts are pursued in the LWIR with either spectroscopic imaging or a system of LWIR FPA combined with a cooled tunable Laser to do spectroscopy with stimulated absorption of specific wavelengths. AIM introduced the RangIR sight to match the requirements of sniper teams, AGLs and weapon stations, extending the outstanding optronic performance of the fielded HuntIR with position data of a target by a laser range finder (LRF), a 3 axis digital magnetic compass (DMC) and a ballistic computer for accurate engagement of remote targets. A version with flexure bearing cooler with >30,000h life time is being developed for continuous operation in e.g. gunfire detection systems. This paper gives an overview of AIM's technologies for enhanced force protection.

  17. Telescope Aiming Point Tracking Method for Bioptic Driving Surveillance

    PubMed Central

    Fu, XianPing; Luo, Gang; Peli, Eli

    2010-01-01

    A bioptic telescope is a visual aid used by people with impaired vision when driving in many US states, though bioptic driving remains controversial. Objective data on how and when bioptic drivers use the telescope and what they look at with it are crucial to understanding the bioptic telescope's effect on driving. A video-based technique to track the telescope's aiming point is presented in this paper. With three infrared retro-reflective markers pasted on the bioptic spectacles' frame, its movement is recorded using an infrared camera unit with infrared LED illuminators. The angles formed by the three markers are used to calculate the telescope's aiming points, which are registered with road scene images recorded by another camera. The calculation is based on a novel one-time calibration method, in which the light spot from a head-mounted laser pointer projected on a wall while the head is scanning is recorded by the scene camera, in synchronization with the infrared camera. Interpolation is performed within small local regions where no samples were taken. Thus, non-linear interpolation error can be minimized, even for wide-range tracking. Experiments demonstrated that the average error over a 70°×48° field was only 0.86°, with lateral head movement allowed. PMID:20529756

  18. A Right to Be Heard: Learning from Learners with Additional Needs in Literacy

    ERIC Educational Resources Information Center

    McPhillips, Therese; Shevlin, Michael; Long, Louise

    2012-01-01

    This study aimed to explore the consultation experiences of pupils who have additional needs in literacy. An opportunistic sample of eight schools--four in Northern Ireland and four in the Republic of Ireland--were chosen by the researchers; selected pupils were receiving additional literacy support. Focus group discussions and arts-based creative…

  19. Chemistry Journal Articles: An Interdisciplinary Approach to Move Analysis with Pedagogical Aims

    ERIC Educational Resources Information Center

    Stoller, Fredricka L.; Robinson, Marin S.

    2013-01-01

    This article highlights aspects of an interdisciplinary (chemistry-applied linguistics) English for Specific Purposes (ESP) course- and materials-development project. The project was aimed at raising genre awareness among chemistry students and faculty, in addition to improving students' disciplinary reading and writing. As part of the project,…

  20. Value of Information Analysis Applied to the Economic Evaluation of Interventions Aimed at Reducing Juvenile Delinquency: An Illustration

    PubMed Central

    Eeren, Hester V.; Schawo, Saskia J.; Scholte, Ron H. J.; Busschbach, Jan J. V.; Hakkaart, Leona

    2015-01-01

    Objectives To investigate whether a value of information analysis, commonly applied in health care evaluations, is feasible and meaningful in the field of crime prevention. Methods Interventions aimed at reducing juvenile delinquency are increasingly being evaluated according to their cost-effectiveness. Results of cost-effectiveness models are subject to uncertainty in their cost and effect estimates. Further research can reduce that parameter uncertainty. The value of such further research can be estimated using a value of information analysis, as illustrated in the current study. We built upon an earlier published cost-effectiveness model that demonstrated the comparison of two interventions aimed at reducing juvenile delinquency. Outcomes were presented as costs per criminal activity free year. Results At a societal willingness-to-pay of €71,700 per criminal activity free year, further research to eliminate parameter uncertainty was valued at €176 million. Therefore, in this illustrative analysis, the value of information analysis determined that society should be willing to spend a maximum of €176 million in reducing decision uncertainty in the cost-effectiveness of the two interventions. Moreover, the results suggest that reducing uncertainty in some specific model parameters might be more valuable than in others. Conclusions Using a value of information framework to assess the value of conducting further research in the field of crime prevention proved to be feasible. The results were meaningful and can be interpreted according to health care evaluation studies. This analysis can be helpful in justifying additional research funds to further inform the reimbursement decision in regard to interventions for juvenile delinquents. PMID:26146831

  1. Foam concrete of increased strength with the thermomodified peat additives

    NASA Astrophysics Data System (ADS)

    Kudyakov, A. I.; Kopanitsa, N. O.; Sarkisov, Ju S.; Kasatkina, A. V.; Prischepa, I. A.

    2015-01-01

    The paper presents the results of research of foam concrete with thermomodified peat additives. The aim of the research was to study the effect of modifying additives on cement stone and foam concrete properties. Peat additives are prepared by heat treatment of peat at 600 °C. Two approaches of obtaining additives are examined: in condition of open air access (TMT-600) and in condition of limited air access (TMT-600-k). Compressive strength of a cement stone with modifiers found to be increased by 28.9 - 65.2%. Introducing peat modifiers into foam concrete mix leads to increase of compressive strength by 44-57% at 28- day age and heat conductivity of foam concrete decreases by 0.089 W/(m·°C).

  2. An intervention aimed at reducing plagiarism in undergraduate nursing students.

    PubMed

    Smedley, Alison; Crawford, Tonia; Cloete, Linda

    2015-05-01

    Plagiarism is a current and developing problem in the tertiary education sector where students access information and reproduce it as their own. It is identified as occurring in many tertiary level degrees including nursing and allied health profession degrees. Nursing specifically, is a profession where standards and ethics are required and honesty is paramount. The aim of this study was to evaluate the change in nursing student's knowledge and understanding of plagiarism before and after an educational intervention in their first semester of the Bachelor of nursing degree at a private college of higher education in Sydney, Australia. This study concluded that an educational intervention can increase knowledge and awareness of plagiarism among nursing students. PMID:25578380

  3. Accuracy of aimed arm movements in changed gravity.

    PubMed

    Bock, O; Howard, I P; Money, K E; Arnold, K E

    1992-11-01

    We studied the accuracy of aimed arm movements in normal gravity, and during the hypergravity (hyper-G) and microgravity (micro-G) episodes of KC-135 parabolic flights. Subjects pointed at mirror-viewed targets without sight of their arm, and final pointing position was measured by a digitizing pad. Compared with the normal gravity (normal-G) baseline, subjects pointed consistently higher in hyper-G, and still higher in micro-G. Results were not different if subjects viewed targets only during normal-G and pointed at their memorized position under changed gravity (changed-G); this suggests that the "elevator illusion" played a minor role in our study. The observed impairments were attributed to degraded proprioceptive feedback and/or inappropriate motor programs in changed-G. Pointing accuracy improved movement-to-movement but not parabola-to-parabola, indicating that prolonged exposure is needed for sustained adaptation. PMID:1445164

  4. Working memory capacity, controlled attention and aiming performance under pressure.

    PubMed

    Wood, Greg; Vine, Samuel J; Wilson, Mark R

    2016-07-01

    This study explored the possibility that individual differences in working memory capacity (WMC) could predict those individuals who would experience attentional disruptions and performance decrements under pressure. Two WMC groups performed a Stroop handgun task under counterbalanced conditions of threat whilst wearing eye-tracking equipment that measured visual search activity and quiet eye (QE) aiming duration. Performance was measured in terms of shooting accuracy. Low-WMC individuals experienced impaired visual search time to locate the target and reduced QE durations when shooting at incongruent target words. Furthermore, the low-WMC group experienced significant reductions in shooting accuracy when anxious. Conversely, high-WMC individuals experienced no significant differences in attentional control or performance across congruency or threat conditions. Results support the suggestion that WMC is not only a good predictor of an individual's ability to control their attention but can also predict those likely to fail under pressure. PMID:26021749

  5. The airborne mass spectrometer AIMS - Part 2: Measurements of trace gases with stratospheric or tropospheric origin in the UTLS

    NASA Astrophysics Data System (ADS)

    Jurkat, Tina; Kaufmann, Stefan; Voigt, Christiane; Schäuble, Dominik; Jeßberger, Philipp; Ziereis, Helmut

    2016-04-01

    Understanding the role of climate-sensitive trace gas variabilities in the upper troposphere and lower stratosphere region (UTLS) and their impact on its radiative budget requires accurate measurements. The composition of the UTLS is governed by transport and chemistry of stratospheric and tropospheric constituents, such as chlorine, nitrogen oxide and sulfur compounds. The Atmospheric chemical Ionization Mass Spectrometer AIMS has been developed to accurately measure a set of these constituents on aircraft by means of chemical ionization. Here we present a setup using SF5- reagent ions for the simultaneous measurement of trace gas concentrations of HCl, HNO3 and SO2 in the pptv to ppmv (10-12 to 10-6 mol mol-1) range with in-flight and online calibration called AIMS-TG (Atmospheric chemical Ionization Mass Spectrometer for measurements of trace gases). Part 1 of this paper (Kaufmann et al., 2016) reports on the UTLS water vapor measurements with the AIMS-H2O configuration. The instrument can be flexibly switched between two configurations depending on the scientific objective of the mission. For AIMS-TG, a custom-made gas discharge ion source has been developed for generation of reagent ions that selectively react with HCl, HNO3, SO2 and HONO. HNO3 and HCl are routinely calibrated in-flight using permeation devices; SO2 is continuously calibrated during flight adding an isotopically labeled 34SO2 standard. In addition, we report on trace gas measurements of HONO, which is sensitive to the reaction with SF5-. The detection limit for the various trace gases is in the low 10 pptv range at a 1 s time resolution with an overall uncertainty of the measurement of the order of 20 %. AIMS has been integrated and successfully operated on the DLR research aircraft Falcon and HALO (High Altitude LOng range research aircraft). As an example, measurements conducted during the TACTS/ESMVal (Transport and Composition of the LMS/UT and Earth System Model Validation) mission with

  6. Effects of anxiety on running with and without an aiming task.

    PubMed

    Nibbeling, Nicky; Daanen, Hein A M; Gerritsma, Rens M; Hofland, Rianne M; Oudejans, Raôul R D

    2012-01-01

    State anxiety is known to affect far aiming tasks, but less is known about the effects of state anxiety on running and aiming while running. Therefore, in the current study participants ran on a treadmill at their preferred speed in a low- and high-anxiety condition. In both conditions, running was combined with dart throwing in the last minutes. Results showed that attention shifted away from task execution with elevated levels of anxiety. Furthermore, gait patterns were more conservative and oxygen uptake was higher with anxiety. In addition, performance and efficiency on the dart throwing task also decreased with anxiety. These findings are in line with attentional control theory and provide an indication that state anxiety not only affects aiming tasks but also tasks that rely heavily on the aerobic system. Moreover, findings indicate that when combined, running, aiming, and anxiety all compete for attention leading to suboptimal attentional control and possibly a decrease in performance. PMID:22106940

  7. [From data entry to data presentation at a clinical workstation--experiences with Anesthesia Information Management Systems (AIMS)].

    PubMed

    Benson, M; Junger, A; Quinzio, L; Michel, A; Sciuk, G; Fuchs, C; Marquardt, K; Hempelmannn, G

    2000-09-01

    Anesthesia Information Management Systems (AIMS) are required to supply large amounts of data for various purposes such as performance recording, quality assurance, training, operating room management and research. It was our objective to establish an AIMS that enables every member of the department to independently access queries at his/her work station and at the same time allows the presentation of data in a suitable manner in order to increase the transfer of different information to the clinical workstation. Apple Macintosh Clients (Apple Computer, Inc. Cupertino, California) and the file- and database servers were installed into the already partially existing hospital network. The most important components installed on each computer are the anesthesia documenting software NarkoData (ProLogic GmbH, Erkrath), HIS client software and a HTML browser. More than 250 queries for easy evaluation were formulated with the software Voyant (Brossco Systems, Espoo, Finland). Together with the documentation they are the evaluation module of the AIMS. Today, more than 20,000 anesthesia procedures are recorded each year at 112 decentralised workstations with the AIMS. In 1998, 90.8% of the 20,383 performed anesthetic procedures were recorded online and 9.2% entered postopeatively into the system. With a corresponding user access it is possible to receive all available patient data at each single anesthesiological workstation via HIS (diagnoses, laboratory results) anytime. The available information includes previous anesthesia records, statistics and all data available from the hospitals intranet. This additional information is of great advantage in comparison to previous working conditions. The implementation of an AIMS allowed to greatly enhance the quota but also the quality of documentation and an increased flow of information at the anesthesia workstation. The circuit between data entry and the presentation and evaluation of data, statistics and results directly

  8. Developing Young Thinkers: An Intervention Aimed to Enhance Children's Thinking Skills

    ERIC Educational Resources Information Center

    Burke, Lynsey A.; Williams, Joanne M.

    2008-01-01

    It is increasingly popular to "teach" thinking skills in schools. A diverse variety of programmes exist to support practitioners in this task, and some research has been gathered on the effectiveness of individual approaches. However, the difficulties when assessing the development of thinking skills are widely documented. This study aimed to…

  9. Applying Athletic Identify Measurement Scale on Physical Educators: Turkish Version of AIMS

    ERIC Educational Resources Information Center

    Tunçkol, H. Mehmet

    2015-01-01

    In sports research, defining athletic identity of individuals is an important study subject. The subject owes its significance to the fact that an individual's athletic identity affects his other identities throughout his life span. The aim of this study is to test the reliability and validity of the Turkish version of Athletic Identity…

  10. Sustainability with an Ethical Aim: Lessons from an American Nun in Amazonia

    ERIC Educational Resources Information Center

    Demaree, Stephanie

    2012-01-01

    Research Topic: An exploration into human imagination, ethical aim and action are the progenitors for reconciliation between humans and their environment. This study of two successful projects in Brazil provides an example of working toward a balance between human endeavors and sustainable environments. This inquiry is an exploration that…

  11. Glycosphingolipids and cell death: one aim, many ways.

    PubMed

    Garcia-Ruiz, Carmen; Morales, Albert; Fernández-Checa, José C

    2015-05-01

    Glycosphingolipids (GSLs) are a family of bioactive lipids that in addition to their role in the regulation of structural properties of membrane bilayers have emerged as crucial players in many biological processes and signal transduction pathways. Rather than being uniformly distributed within membrane bilayers, GSLs are localized in selective domains called lipid rafts where many signaling platforms operate. One of the most important functions of GSLs, particularly ceramide, is their ability to regulate cell death pathways and hence cell fate. This complex role is accomplished by the ability of GSLs to act in distinct subcellular strategic centers, such as mitochondria, endoplasmic reticulum (ER) or lysosomes to mediate apoptosis, ER stress, autophagy, lysosomal membrane permeabilization and necroptosis. Hence better understanding the role of GSLs in cell death may be of relevance for a number of pathological processes and diseases, including neurodegeneration, metabolic liver diseases and cancer. PMID:25637183

  12. Glycosphingolipids and cell death: One aim, many ways

    PubMed Central

    Garcia-Ruiz, Carmen; Morales, Albert; Fernández-Checa, José C.

    2015-01-01

    Glycosphingolipids (GSLs) are a family of bioactive lipids that in addition to their role in the regulation of structural properties of membrane bilayers have emerged as crucial players in many biological processes and signal transduction pathways. Rather than being uniformly distributed within membrane bilayers, GSLs are localized in selective domains called lipid rafts where many signaling platforms operate. One of the most important functions of GSLs, particularly ceramide, is their ability to regulate cell death pathways and hence cell fate. This complex role is accomplished by the ability of GSLs to act in distinct subcellular strategic centers, such as mitochondria, endoplasmic reticulum (ER) or lysosomes to mediate apoptosis, ER stress, autophagy, lysosomal membrane permeabilization and necroptosis. Hence better understanding the role of GSLs in cell death may be of relevance for a number of pathological processes and diseases, including neurodegeneration, metabolic liver diseases and cancer. PMID:25637183

  13. Independent donor ethical assessment: aiming to standardize donor advocacy.

    PubMed

    Choudhury, Devasmita; Jotterand, Fabrice; Casenave, Gerald; Smith-Morris, Carolyn

    2014-06-01

    Living organ donation has become more common across the world. To ensure an informed consent process, given the complex issues involved with organ donation, independent donor advocacy is required. The choice of how donor advocacy is administered is left up to each transplant center. This article presents the experience and process of donor advocacy at University of Texas Southwestern Medical Center administered by a multidisciplinary team consisting of physicians, surgeons, psychologists, medical ethicists and anthropologists, lawyers, a chaplain, a living kidney donor, and a kidney transplant recipient. To ensure that advocacy remains fair and consistent for all donors being considered, the donor advocacy team at University of Texas Southwestern Medical Center developed the Independent Donor Ethical Assessment, a tool that may be useful to others in rendering donor advocacy. In addition, the tool may be modified as circumstances arise to improve donor advocacy and maintain uniformity in decision making. PMID:24919733

  14. Paleographic Atlas of northern Eurasia: Aims and current progress

    SciTech Connect

    Kazmin, V.G. )

    1993-09-01

    A project aimed at paleographic reconstruction of northern Eurasia (the former USSR and adjacent territories) commenced in 1993 in Russia under the auspices of two nongovernmental scientific organizations: Scientific Council on Plate Tectonics and Institute of Tectonics of Lithospheric Plates. The project is sponsored by the State Committee on Geology and Exxon and Shell companies. Twenty-six data-base maps and corresponding paleogeographic maps on a set of new paleotectonic reconstructions are to be compiled within two years, covering a period from Devonian to present. The next two-year phase is expected to follow, with a compilation of similar maps for Early Paleozoic and late Riphean. the best experts on regional geology, paleoenvironment, paleomagnetics, and paleotectonic reconstructions participate in the program. A special group, Geocentre Company, is assigned to the computerization of maps. The 1993 compilation of 15 database maps is to be completed and the first reconstructions produced. The database maps (starting from Tithonian upward) contain information on lithology, facies and thickness of sedimentary formations, and magnetic and structural indicators of plate tectonic data; oil and gas deposits are indicated. Emphasis is placed on the paleogeographic evolution of sedimentary basins, potential reservoirs of hydrocarbons. Narrow time intervals between maps (about 10 m.y.) permit detailed reconstructions of the basins' evolution. Examples of database and paleogeographic maps are presented in the poster.

  15. Concurrent visual feedback and spatial accuracy in continuous aiming movements.

    PubMed

    Sherwood, David E; Rothman, Kelly K

    2011-12-01

    The effect of concurrent visual feedback (CVF) on continuous aiming movements was investigated in the preferred hand of participants of college age (ns = 12 men, 8 women). Participants made continuous rapid reversal movements with a lightweight lever in the sagittal plane. Participants attempted to reach a short target (20 degrees) and a long target (60 degrees) in separate constant practice conditions, but alternated between the two targets in a variable practice condition. Four blocks of practice trials were provided in each condition, with 40 movements made in each. CVF of the position-time trace was provided for the first 20 movements of each block, but was removed for the remaining 20 movements in each block. Movements were more accurate and consistent during constant practice compared to variable practice where the short target was overshot and the long target was undershot. CVF reduced errors in all conditions, compared to movements without CVF, particularly for the short target during variable practice. The results suggest that the interference generated by alternating targets can be modulated by providing visual feedback, but once the visual feedback was removed, errors increased markedly. PMID:22403928

  16. Avoiding Obstructions in Aiming a High-Gain Antenna

    NASA Technical Reports Server (NTRS)

    Edmonds, Karina

    2006-01-01

    The High Gain Antenna Pointing and Obstruction Avoidance software performs computations for pointing a Mars Rover high-gain antenna for communication with Earth while (1) avoiding line-of-sight obstructions (the Martian terrain and other parts of the Rover) that would block communication and (2) taking account of limits in ranges of motion of antenna gimbals and of kinematic singularities in gimbal mechanisms. The software uses simplified geometric models of obstructions and of the trajectory of the Earth in the Martian sky(see figure). It treats all obstructions according to a generalized approach, computing and continually updating the time remaining before interception of each obstruction. In cases in which the gimbal-mechanism design allows two aiming solutions, the algorithm chooses the solution that provides the longest obstruction-free Earth-tracking time. If the communication session continues until an obstruction is encountered in the current pointing solution and the other solution is now unobstructed, then the algorithm automatically switches to the other position. This software also notifies communication- managing software to cease transmission during the switch to the unobstructed position, resuming it when the switch is complete.

  17. The EvA study: aims and strategy.

    PubMed

    Ziegler-Heitbrock, Loems; Frankenberger, Marion; Heimbeck, Irene; Burggraf, Dorothe; Wjst, Matthias; Häussinger, Karl; Brightling, Chris; Gupta, Sumit; Parr, David; Subramanian, Deepak; Singh, Dave; Kolsum, Umme; Boschetto, Piera; Potena, Alfredo; Gorecka, Dorota; Nowinski, Adam; Barta, Imre; Döme, Balazs; Strausz, Janos; Greulich, Timm; Vogelmeier, Claus; Bals, Robert; Hohlfeld, Jens M; Welte, Tobias; Venge, Per; Gut, Ivo; Boland, Anne; Olaso, Robert; Hager, Jörg; Hiemstra, Pieter; Rabe, Klaus F; Unmüssig, Martina; Müller-Quernheim, Joachim; Prasse, Antje

    2012-10-01

    The EvA study is a European Union-funded project under the Seventh Framework Programme (FP7), which aims at defining new markers for chronic obstructive pulmonary disease (COPD) and its subtypes. The acronym is derived from emphysema versus airway disease, indicating that the project targets these two main phenotypes of the disease. The EvA study is based on the concept that emphysema and airway disease are governed by different pathophysiological processes, are driven by different genes and have differential gene expression in the lung. To define these genes, patients and non-COPD controls are recruited for clinical examination, lung function analysis and computed tomography (CT) of the lung. CT scans are used to define the phenotypes based on lung density and airway wall thickness. This is followed by bronchoscopy in order to obtain samples from the airways and the alveoli. These tissue samples, along with blood samples, are then subjected to genome-wide expression and association analysis and markers linked to the phenotypes are identified. The population of the EvA study is different from other COPD study populations, since patients with current oral glucocorticoids, antibiotics and exacerbations or current smokers are excluded, such that the signals detected in the molecular analysis are due to the distinct inflammatory process of emphysema and airway disease in COPD. PMID:22441733

  18. Oil spill response group aiming for full operation

    SciTech Connect

    Crow, P.

    1991-12-02

    In 15 months the first national oil spill cleanup organization plans to be in operation at sites around the U.S. coast. This paper reports that the Marine Spill Response Corp. (MSRC), financed by major oil companies, plans to begin full operation Feb. 18, 1993. It is considering starting limited operations in selected regions before then. Following the 1989 Exxon Valdez oil spill, an American Petroleum Institute task force proposed creation of a private offshore oil spill response agency. Individual oil companies then began a nonprofit firm that has evolved into MSRC. MSRC has a clearly defined role: It exists to sponsor oil spill research and to respond to catastrophic spills from offshore pipelines, platforms, rigs and tankers, carrying the oil of its sponsoring companies.

  19. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial

    PubMed Central

    Rule, Simon; Smith, Paul; Johnson, Peter W.M.; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F.; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-01-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  20. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial.

    PubMed

    Rule, Simon; Smith, Paul; Johnson, Peter W M; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-02-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  1. Expression of AIM2 is high and correlated with inflammation in hepatitis B virus associated glomerulonephritis

    PubMed Central

    2013-01-01

    . The data suggest that AIM2 expression is directly correlated with HBV infection-associated inflammation. Conclusion The elevation of AIM2 during HBV infection or replication may contribute to its associated inflammatory damage, thus providing a putative therapeutic target and a new avenue for researching the pathogenesis of HBV-GN. PMID:24325587

  2. Straight sinus: ultrastructural analysis aimed at surgical tumor resection.

    PubMed

    Amato, Marcelo Campos Moraes; Tirapelli, Luis Fernando; Carlotti, Carlos Gilberto; Colli, Benedicto Oscar

    2016-08-01

    OBJECTIVE Accurate knowledge of the anatomy of the straight sinus (SS) is relevant for surgical purposes. During one surgical procedure involving the removal of part of the SS wall, the authors observed that the venous blood flow was maintained in the SS, possibly through a vein-like structure within the dural sinus or dural multiple layers. This observation and its divergence from descriptions of the histological features of the SS walls motivated the present study. The authors aimed to investigate whether it is possible to dissect the SS walls while keeping the lumen intact, and to describe the histological and ultrastructural composition of the SS wall. METHODS A total of 22 cadaveric specimens were used. The SS was divided into three portions: anterior, middle, and posterior. The characteristics of the SS walls were analyzed, and the feasibility of dissecting them while keeping the SS lumen intact was assessed. The thickness and the number of collagen fibers and other tissues in the SS walls were compared with the same variables in other venous sinuses. Masson's trichrome and Verhoeff's stains were used to assess collagen and elastic fibers, respectively. The data were analyzed using Zeiss image analysis software (KS400). RESULTS A vein-like structure independent of the SS walls was found in at least one of the portions of the SS in 8 of 22 samples (36.36%). The inferior wall could be delaminated in at least one portion in 21 of 22 samples (95.45%), whereas the lateral walls could seldom be delaminated. The inferior wall of the SS was thicker (p < 0.05) and exhibited less collagen and greater amounts of other tissues-including elastic fibers, connective tissue, blood vessels, and nerve fibers (p < 0.05)-compared with the lateral walls. Transmission electron microscopy revealed the presence of muscle fibers at a level deeper than that of the subendothelial connective tissue in the inferior wall of the SS, extending from its junction with the great cerebral vein

  3. Aiming at the target: improved adjuvant medical therapy.

    PubMed

    Bedard, Philippe L; Dinh, Phuong; Sotiriou, Christos; Piccart-Gebhart, Martine J

    2009-10-01

    The 2007 St. Gallen Expert Panel recognized the existence of molecular tools for risk stratification, but recommended the use of high-quality standard pathological testing alone for risk allocation and treatment selection. Over the last two years, much has been learned about these novel molecular tools: they demonstrate similar prognostic power; their performance appears to be driven by improved quantification of cellular proliferation; tumour burden remains an important determinant of long-term outcome; and their prediction of responsiveness to systemic therapy is suboptimal. In the meantime, great effort has continued to be invested in evaluating individual predictive markers to guide treatment selection. A number of putative targets that showed early promise--such as HER-2 and TOP2A gene amplification for anthracyclines, Myc amplification for trastuzumab, and Tau expression for taxanes--have yielded disappointing results when subjected to subsequent validation. These failings underscore the difficulty of accurate, reproducible target measurement and the inherent complexity of early breast cancer which is unlikely to be captured by a single gene or protein alteration. Future progress in adjuvant treatment tailoring will require a fundamental shift towards multi-dimensional thinking--with the development of multi-parameter assays that integrate tumour biology, disease burden, and host-related factors. The traditional model of post hoc predictive marker validation appears unlikely to produce tangible gains in the era of targeted systemic therapy. It is hoped that coupling prospective biomarker discovery with new drug development in earlier stages of disease will yield additional targets that can be used to guide clinical decision-making in the future. PMID:19914538

  4. Assembly-driven activation of the AIM2 foreign-dsDNA sensor provides a polymerization template for downstream ASC

    NASA Astrophysics Data System (ADS)

    Morrone, Seamus R.; Matyszewski, Mariusz; Yu, Xiong; Delannoy, Michael; Egelman, Edward H.; Sohn, Jungsan

    2015-07-01

    AIM2 recognizes foreign dsDNA and assembles into the inflammasome, a filamentous supramolecular signalling platform required to launch innate immune responses. We show here that the pyrin domain of AIM2 (AIM2PYD) drives both filament formation and dsDNA binding. In addition, the dsDNA-binding domain of AIM2 also oligomerizes and assists in filament formation. The ability to oligomerize is critical for binding dsDNA, and in turn permits the size of dsDNA to regulate the assembly of the AIM2 polymers. The AIM2PYD oligomers define the filamentous structure, and the helical symmetry of the AIM2PYD filament is consistent with the filament assembled by the PYD of the downstream adaptor ASC. Our results suggest that the role of AIM2PYD is not autoinhibitory, but generating a structural template by coupling ligand binding and oligomerization is a key signal transduction mechanism in the AIM2 inflammasome.

  5. Field Experiments Aimed To The Analysis of Flood Generation Processes

    NASA Astrophysics Data System (ADS)

    Carriero, D.; Iacobellis, V.; Oliveto, G.; Romano, N.; Telesca, V.; Fiorentino, M.

    The study of the soil moisture dynamics and of the climate-soil-vegetation interac- tion is essential for the comprehension of possible climatic change phenomena, as well as for the analysis of occurrence of extreme hydrological events. In this trend the theoretically-based distribution of floods recently derived by Fiorentino and Ia- cobellis, [ŞNew insights about the climatic and geologic control on the probability distribution of floodsT, Water Resources Research, 2001, 37: 721-730] demonstrated, by an application in some Southern Italy basins, that processes at the hillslope scale strongly influence the basin response by means of the different mechanisms of runoff generation produced by various distributions of partial area contributing. This area is considered as a stochastic variable whose pdf position parameter showed strong de- pendence on the climate as it can seen in the studied basins behavior: in dry zones, where there is the prevalence of the infiltration excess (Horton) mechanism, the basin water loss parameter decreases as basin area increases and the flood peak source area depends on the permeability of soils; in humid zones, with the prevalence of satu- ration excess (Dunne) process, the loss parameter seems independent from the basin area and very sensitive to simple climatic index while only small portion of the area invested by the storm contributes to floods. The purpose of this work is to investigate the consistency of those interpretations by means of field experiments at the hillslope scale to establish a parameterization accounting for soil physical and hydraulic prop- erties, vegetation characteristics and land-use. The research site is the catchment of River Fiumarella di Corleto, which is located in Basilicata Region, Italy, and has a drainage area of approximately 32 km2. The environment has a rather dynamic geo- morphology and very interesting features from the soil-landscape modeling viewpoint [Santini A., A. Coppola, N. Romano, and

  6. The airborne mass spectrometer AIMS - Part 2: Measurements of trace gases with stratospheric or tropospheric origin in the UTLS

    NASA Astrophysics Data System (ADS)

    Jurkat, T.; Kaufmann, S.; Voigt, C.; Schäuble, D.; Jeßberger, P.; Ziereis, H.

    2015-12-01

    Understanding the role of climate-sensitive trace gas variabilities in the upper troposphere and lower stratosphere region (UTLS) and their impact on its radiative budget requires accurate measurements. The composition of the UTLS is governed by transport and chemistry of stratospheric and tropospheric constituents, such as chlorine, nitrogen oxide and sulphur components. The Airborne chemical Ionization Mass Spectrometer AIMS has been developed to accurately measure a set of these constituents on aircraft by means of chemical ionization. Here we present a setup using chemical ionization with SF5- reagent ions for the simultaneous measurement of trace gas concentrations in the pptv to ppmv (10-12 to 10-6 mol mol-1) range of HCl, HNO3 and SO2 with in-flight and online calibration called AIMS-TG. Part 1 of this paper (Kaufmann et al., 2015) reports on the UTLS water vapour measurements with the AIMS-H2O configuration. The instrument can be flexibly switched between two configurations depending on the scientific objective of the mission. For AIMS-TG, a custom-made gas discharge ion source has been developed generating a characteristic ionization scheme. HNO3 and HCl are routinely calibrated in-flight using permeation devices, SO2 is permanently calibrated during flight adding an isotopically labelled 34SO2 standard. In addition, we report on trace gas measurements of HONO which is sensitive to the reaction with SF5-. The detection limit for the various trace gases is in the low ten pptv range at a 1 s time resolution with an overall uncertainty of the measurement in the order of 20 %. AIMS has been integrated and successfully operated on the DLR research aircraft Falcon and HALO. Exemplarily, measurements conducted during the TACTS/ESMVal mission with HALO in 2012 are presented, focusing on a classification of tropospheric and stratospheric influences in the UTLS region. Comparison of AIMS measurements with other measurement techniques allow to draw a comprehensive

  7. Online decision support based on modeling with the aim of increased irrigation efficiency

    NASA Astrophysics Data System (ADS)

    Dövényi-Nagy, Tamás; Bakó, Károly; Molnár, Krisztina; Rácz, Csaba; Vasvári, Gyula; Nagy, János; Dobos, Attila

    2015-04-01

    The significant changes in the structure of ownership and control of irrigation infrastructure in the past decades resultted in the decrease of total irrigable and irrigated area (Szilárd, 1999). In this paper, the development of a model-based online service is described whose aim is to aid reasonable irrigation practice and increase water use efficiency. In order to establish a scientific background for irrigation, an agrometeorological station network has been built up by the Agrometeorological and Agroecological Monitoring Centre. A website has been launched in order to provide direct access for local agricultural producers to both the measured weather parameters and results of model based calculations. The public site provides information for general use, registered partners get a handy model based toolkit for decision support at the plot level concerning irrigation, plant protection or frost forecast. The agrometeorological reference station network was established in the recent years by the Agrometeorological and Agroecological Monitoring Centre and is distributed to cover most of the irrigated cropland areas of Hungary. From the spatial aspect, the stations have been deployed mainly in Eastern Hungary with concentrated irrigation infrastructure. The meteorological stations' locations have been carefully chosen to represent their environment in terms of soil, climatic and topographic factors, thereby assuring relevant and up-to-date input data for the models. The measured parameters range from classic meteorological data (air temperature, relative humidity, solar irradiation, wind speed etc.) to specific data which are not available from other services in the region, such as soil temperature, soil water content in multiple depths and leaf wetness. In addition to the basic grid of reference stations, specific stations under irrigated conditions have been deployed to calibrate and validate the models. A specific modeling framework (MetAgro) has been developed

  8. Surface texture measurement for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  9. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects. PMID:24772784

  10. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  11. Operationalizing the RE-AIM framework to evaluate the impact of multi-sector partnerships

    PubMed Central

    2014-01-01

    Background The RE-AIM (Reach, Effectiveness, Adoption, Implementation, and Maintenance) framework is a reliable tool for the translation of research to practice. This framework has been widely applied to assess the impact of individual interventions. However, RE-AIM has rarely been used to evaluate implementation interventions, especially from multi-sector partnerships. The primary purpose of this paper is to operationalize the RE-AIM approach to evaluate large, multi-sector partnerships. SCI Action Canada, a community-university partnership aimed to promote physical activity among adults with spinal cord injury, is used as an example. A secondary purpose is to provide initial data from SCI Action Canada by using this conceptualization of RE-AIM. Methods Each RE-AIM element is operationalized for multi-sector partnerships. Specific to SCI Action Canada, seven reach calculations, four adoption rates, four effectiveness outcomes, one implementation, one organizational maintenance, and two individual maintenance outcomes are defined. The specific numerators based on SCI Action Canada activities are also listed for each of these calculations. Results The results are derived from SCI Action Canada activities. SCI Action Canada’s reach ranged from 3% (end-user direct national reach) to 37% (total regional reach). Adoption rates were 15% (provincial level adoption) to 76% (regional level adoption). Implementation and organizational maintenance rates were 92% and 100%, respectively. Conclusions We have operationalized the RE-AIM framework for larger multi-sectoral partnerships and demonstrated its applicability to such partnerships with SCI Action Canada. Future partnerships could use RE-AIM to assess their public health impact. PMID:24923331

  12. Additive usage levels.

    PubMed

    Langlais, R

    1996-01-01

    With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century. PMID:8792135

  13. An additional middle cuneiform?

    PubMed Central

    Brookes-Fazakerley, S.D.; Jackson, G.E.; Platt, S.R.

    2015-01-01

    Additional cuneiform bones of the foot have been described in reference to the medial bipartite cuneiform or as small accessory ossicles. An additional middle cuneiform has not been previously documented. We present the case of a patient with an additional ossicle that has the appearance and location of an additional middle cuneiform. Recognizing such an anatomical anomaly is essential for ruling out second metatarsal base or middle cuneiform fractures and for the preoperative planning of arthrodesis or open reduction and internal fixation procedures in this anatomical location. PMID:26224890

  14. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1995

    SciTech Connect

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This report contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Subject areas covered are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  15. Carbamate deposit control additives

    SciTech Connect

    Honnen, L.R.; Lewis, R.A.

    1980-11-25

    Deposit control additives for internal combustion engines are provided which maintain cleanliness of intake systems without contributing to combustion chamber deposits. The additives are poly(oxyalkylene) carbamates comprising a hydrocarbyloxyterminated poly(Oxyalkylene) chain of 2-5 carbon oxyalkylene units bonded through an oxycarbonyl group to a nitrogen atom of ethylenediamine.

  16. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  17. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  18. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  19. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  20. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  1. The display of molecular models with the Ames Interactive Modeling System (AIMS)

    NASA Technical Reports Server (NTRS)

    Egan, J. T.; Hart, J.; Burt, S. K.; Macelroy, R. D.

    1982-01-01

    A visualization of molecular models can lead to a clearer understanding of the models. Sophisticated graphics devices supported by minicomputers make it possible for the chemist to interact with the display of a very large model, altering its structure. In addition to user interaction, the need arises also for other ways of displaying information. These include the production of viewgraphs, film presentation, as well as publication quality prints of various models. To satisfy these needs, the display capability of the Ames Interactive Modeling System (AIMS) has been enhanced to provide a wide range of graphics and plotting capabilities. Attention is given to an overview of the AIMS system, graphics hardware used by the AIMS display subsystem, a comparison of graphics hardware, the representation of molecular models, graphics software used by the AIMS display subsystem, the display of a model obtained from data stored in molecule data base, a graphics feature for obtaining single frame permanent copy displays, and a feature for producing multiple frame displays.

  2. Manipulating crystallization with molecular additives.

    PubMed

    Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

    2014-01-01

    Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications. PMID:24579880

  3. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  4. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  5. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  6. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  7. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  8. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  9. Profiling Transitions in Emotional Development for Students with Additional Learning Needs

    ERIC Educational Resources Information Center

    Roberts, Eileen; Griffin, Patrick

    2009-01-01

    The aim of the research described in this article was to build a protocol for describing students' development of emotional knowledge and understanding, and to tailor this to the requirements of assessing the progress of students with additional needs. The paper reports the establishment of such a developmental profile, using procedures for…

  10. Virtual Carrots, Sticks and Student Engagement: Supporting Student Researchers

    ERIC Educational Resources Information Center

    Cassidy, Claire; Rimpilainen, Sanna

    2011-01-01

    This article describes a three-year research project which aimed to introduce a technological innovation in working with three cohorts of undergraduate students to support them in completing their final-year dissertations through the use of a Virtual Research Environment (VRE). An additional aim of the project was to establish, amongst the…

  11. Boron addition to alloys

    SciTech Connect

    Coad, B. C.

    1985-08-20

    A process for addition of boron to an alloy which involves forming a melt of the alloy and a reactive metal, selected from the group consisting of aluminum, titanium, zirconium and mixtures thereof to the melt, maintaining the resulting reactive mixture in the molten state and reacting the boric oxide with the reactive metal to convert at least a portion of the boric oxide to boron which dissolves in the resulting melt, and to convert at least portion of the reactive metal to the reactive metal oxide, which oxide remains with the resulting melt, and pouring the resulting melt into a gas stream to form a first atomized powder which is subsequently remelted with further addition of boric oxide, re-atomized, and thus reprocessed to convert essentially all the reactive metal to metal oxide to produce a powdered alloy containing specified amounts of boron.

  12. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  13. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  14. [Biologically active food additives].

    PubMed

    Velichko, M A; Shevchenko, V P

    1998-07-01

    More than half out of 40 projects for the medical science development by the year of 2000 have been connected with the bio-active edible additives that are called "the food of XXI century", non-pharmacological means for many diseases. Most of these additives--nutricevtics and parapharmacevtics--are intended for the enrichment of food rations for the sick or healthy people. The ecologicaly safest and most effective are combined domestic adaptogens with immuno-modulating and antioxidating action that give anabolic and stimulating effect,--"leveton", "phytoton" and "adapton". The MKTs-229 tablets are residue discharge means. For atherosclerosis and general adiposis they recommend "tsar tablets" and "aiconol (ikhtien)"--on the base of cod-liver oil or "splat" made out of seaweed (algae). All these preparations have been clinically tested and received hygiene certificates from the Institute of Dietology of the Russian Academy of Medical Science. PMID:9752776

  15. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  16. Hydrocarbon fuel additive

    SciTech Connect

    Ambrogio, S.

    1989-02-28

    This patent describes the method of fuel storage or combustion, wherein the fuel supply contains small amounts of water, the step of adding to the fuel supply an additive comprising a blend of a hydrophilic agent chosen from the group of ethylene glycol, n-butyl alcohol, and cellosolve in the range of 22-37% by weight; ethoxylated nonylphenol in the range of 26-35% by weight; nonylphenol polyethylene glycol ether in the range of 32-43% by weight.

  17. Advanced Industrial Materials (AIM) program. Compilation of project summaries and significant accomplishments FY 1996

    SciTech Connect

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven {open_quotes}Vision Industries{close_quotes} that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: (1) Aluminum; (2) Chemical; (3) Forest Products; (4) Glass; (5) Metal Casting; (6) Refineries; and (7) Steel. This report is a compilation of project summaries and significant accomplishments on materials.

  18. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  19. COPD Multidisciplinary Team Meetings in the United Kingdom: Health Care Professionals' Perceptions of Aims and Structure.

    PubMed

    Kruis, Annemarije L; Soljak, Michael; Chavannes, Niels H; Elkin, Sarah L

    2016-10-01

    Over the last 10 years, community and hospital-based multidisciplinary teams (MDTs) have been set up for the management of patients with chronic obstructive pulmonary disease (COPD) in the UK. Meetings of the MDTs have become a regular occurrence, mostly on healthcare professionals' own initiatives. There are no standardized methods to conduct an MDT meeting, and although cancer MDT meetings are widely implemented, the value and purpose of COPD MDT meetings are less clear. Therefore, the aim of this study was to conduct a cross-sectional descriptive online survey to explore COPD MDT members' perceptions of the purpose and usefulness of MDT meetings, and to identify suggestions or requirements to improve the meetings. In total, we received 68 responses from 10 MDTs; six teams (n = 36 members) were located in London and four (n = 32 members) outside. Analysis of the replies by two independent researchers found that MDT meetings aim to optimise management and improve pathways for respiratory patients by improving communication between providers across settings and disciplines. Education of the MDT members also occurs with the aim of safer practice. Discussed patients are characterised by (multiple) co-morbidities, frequent exacerbations and admissions, social and mental health problems, unclear diagnosis and suboptimal responses to interventions. Members reported participating in a COPD MDT as very useful (74%) or useful (20%). Meetings could be improved by ensuring attendance through requirement in job plans, by clear documentation and sharing of derived plans with a wider audience including general practitioners and patients. PMID:26263193

  20. Evaluating the public health impact of health promotion interventions: the RE-AIM framework.

    PubMed Central

    Glasgow, R E; Vogt, T M; Boles, S M

    1999-01-01

    Progress in public health and community-based interventions has been hampered by the lack of a comprehensive evaluation framework appropriate to such programs. Multilevel interventions that incorporate policy, environmental, and individual components should be evaluated with measurements suited to their settings, goals, and purpose. In this commentary, the authors propose a model (termed the RE-AIM model) for evaluating public health interventions that assesses 5 dimensions: reach, efficacy, adoption, implementation, and maintenance. These dimensions occur at multiple levels (e.g., individual, clinic or organization, community) and interact to determine the public health or population-based impact of a program or policy. The authors discuss issues in evaluating each of these dimensions and combining them to determine overall public health impact. Failure to adequately evaluate programs on all 5 dimensions can lead to a waste of resources, discontinuities between stages of research, and failure to improve public health to the limits of our capacity. The authors summarize strengths and limitations of the RE-AIM model and recommend areas for future research and application. PMID:10474547

  1. The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

    SciTech Connect

    Sorrell, C.A.

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`

  2. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  3. Oil additive process

    SciTech Connect

    Bishop, H.

    1988-10-18

    This patent describes a method of making an additive comprising: (a) adding 2 parts by volume of 3% sodium hypochlorite to 45 parts by volume of diesel oil fuel to form a sulphur free fuel, (b) removing all water and foreign matter formed by the sodium hypochlorite, (c) blending 30 parts by volume of 24% lead naphthanate with 15 parts by volume of the sulphur free fuel, 15 parts by volume of light-weight material oil to form a blended mixture, and (d) heating the blended mixture slowly and uniformly to 152F.

  4. Do-It-Yourself Additives Recharge Auto Air Conditioning

    NASA Technical Reports Server (NTRS)

    2010-01-01

    In planning for a return mission to the Moon, NASA aimed to improve the thermal control systems that keep astronauts comfortable and cool while inside a spacecraft. Goddard Space Flight Center awarded a Small Business Innovation Research (SBIR) contract to Mainstream Engineering Corporation, of Rockledge, Florida, to develop a chemical/mechanical heat pump. IDQ Inc., of Garland, Texas, exclusively licensed the technology and incorporates it into its line of Arctic Freeze products for automotive air conditioning applications. While working on the design, Mainstream Engineering came up with a unique liquid additive called QwikBoost to enhance the performance of the advanced heat pump design.

  5. The Automated Instrumentation and Monitoring System (AIMS): Design and Architecture. 3.2

    NASA Technical Reports Server (NTRS)

    Yan, Jerry C.; Schmidt, Melisa; Schulbach, Cathy; Bailey, David (Technical Monitor)

    1997-01-01

    Whether a researcher is designing the 'next parallel programming paradigm', another 'scalable multiprocessor' or investigating resource allocation algorithms for multiprocessors, a facility that enables parallel program execution to be captured and displayed is invaluable. Careful analysis of such information can help computer and software architects to capture, and therefore, exploit behavioral variations among/within various parallel programs to take advantage of specific hardware characteristics. A software tool-set that facilitates performance evaluation of parallel applications on multiprocessors has been put together at NASA Ames Research Center under the sponsorship of NASA's High Performance Computing and Communications Program over the past five years. The Automated Instrumentation and Monitoring Systematic has three major software components: a source code instrumentor which automatically inserts active event recorders into program source code before compilation; a run-time performance monitoring library which collects performance data; and a visualization tool-set which reconstructs program execution based on the data collected. Besides being used as a prototype for developing new techniques for instrumenting, monitoring and presenting parallel program execution, AIMS is also being incorporated into the run-time environments of various hardware testbeds to evaluate their impact on user productivity. Currently, the execution of FORTRAN and C programs on the Intel Paragon and PALM workstations can be automatically instrumented and monitored. Performance data thus collected can be displayed graphically on various workstations. The process of performance tuning with AIMS will be illustrated using various NAB Parallel Benchmarks. This report includes a description of the internal architecture of AIMS and a listing of the source code.

  6. Midline Body Actions and Leftward Spatial "Aiming" in Patients with Spatial Neglect.

    PubMed

    Chaudhari, Amit; Pigott, Kara; Barrett, A M

    2015-01-01

    Spatial motor-intentional "Aiming" bias is a dysfunction in initiation/execution of motor-intentional behavior, resulting in hypokinetic and hypometric leftward movements. Aiming bias may contribute to posture, balance, and movement problems and uniquely account for disability in post-stroke spatial neglect. Body movement may modify and even worsen Aiming errors, but therapy techniques, such as visual scanning training, do not take this into account. Here, we evaluated (1) whether instructing neglect patients to move midline body parts improves their ability to explore left space and (2) whether this has a different impact on different patients. A 68-year-old woman with spatial neglect after a right basal ganglia infarct had difficulty orienting to and identifying left-sided objects. She was prompted with four instructions: "look to the left," "point with your nose to the left," "point with your [right] hand to the left," and "stick out your tongue and point it to the left." She oriented leftward dramatically better when pointing with the tongue/nose, than she did when pointing with the hand. We then tested nine more consecutive patients with spatial neglect using the same instructions. Only four of them made any orienting errors. Only one patient made >50% errors when pointing with the hand, and she did not benefit from pointing with the tongue/nose. We observed that pointing with the tongue could facilitate left-sided orientation in a stroke survivor with spatial neglect. If midline structures are represented more bilaterally, they may be less affected by Aiming bias. Alternatively, moving the body midline may be more permissive for leftward orienting than moving right body parts. We were not able to replicate this effect in another patient; we suspect that the magnitude of this effect may depend upon the degree to which patients have directional akinesia, spatial Where deficits, or cerebellar/frontal cortical lesions. Future research could examine these

  7. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1997

    SciTech Connect

    1998-05-01

    The mission of the Advanced Industrial Materials (AIM) Program is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. A fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrates on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support. Assessments of materials needs and opportunities in the process industries are an on-going effort within the program. These assessments are being used for program planning and priority setting, followed by support of work to satisfy those needs. All the industries have identified materials as critical, particularly for high-temperature strength, corrosion resistance, and wear resistance. Also important from the energy efficiency viewpoint are membranes, catalytic membranes, and reactors for separations, both for processing and waste reduction. AIM focuses, therefore, on high-temperature materials, corrosion resistant materials, wear resistant materials, strong polymers, coatings, and membrane materials for industrial applications.

  8. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  9. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  10. International SUSMIN-project aims at sustainable gold mining in EU

    NASA Astrophysics Data System (ADS)

    Backnäs, Soile; Neitola, Raisa; Turunen, Kaisa; Lima, Alexandre; Fiúza, António; Szlachta, Malgorzata; Wójtowicz, Patryk; Maftei, Raluca; Munteanu, Marian; Alakangas, Lena; Baciu, Calin; Fernández, Dámaris

    2015-04-01

    Although the gold demand has been constantly increasing in past years, the commodity findings have been decreasing and the extraction of gold has complicated due to increasing complexity and decreasing grade of the ores. Additionally, even gold mining could increase economical development, it has also challenges in eco-efficiency and extraction methods (e.g. cyanide). Thus, the novel energy and resource-efficient methods and technologies for mineral processing should be developed to concentrate selectively different gold bearing minerals. Furthermore, technologies for efficient treatment of mine waters, sustainable management of wastes, and methods to diminish environmental and social impacts of mining are needed. These problems will be addressed by the three year long project SUSMIN. The SUSMIN-project identifies and evaluates environmental impacts and economical challenges of gold mining within EU. The objective of the project is to increase the transnational cooperation and to support environmentally, socially and economically sustainable viable gold production. The focus is to develop and test geophysical techniques for gold exploration, eco-efficient ore beneficiation methods and alternatives for cyanide leaching. Additionally, the research will improve treatment methods for mine waters by the development and testing of advanced adsorbents. The research on socio-economic issues pursues to develop tools for enhancing the mechanisms of the corporate social responsibility as well as community engagement and management of the relations with the stakeholders. Moreover, with the environmental risk assessment and better knowledge of the geochemistry and long-term transformation of the contaminants in mining wastes and mine waters, the mining companies are able to predict and prevent the impacts to the surrounding environment, resulting in an improved environmental management solution. The SUSMIN consortium led by Geological Survey of Finland (GTK) includes seven

  11. Risk perception of driving as a function of advanced training aimed at recognizing and handling risks in demanding driving situations.

    PubMed

    Rosenbloom, Tova; Shahar, Amit; Elharar, Avi; Danino, Offir

    2008-03-01

    The present study examined in 224 individuals whether an advanced driving training aimed at recognizing, avoiding and handling risks in demanding driving situations, affected perceived risk of driving situations (measured by a questionnaire). The training, which involved both experience and feedback on real performance, specifically intended to emphasize the dangers in loss of control of a vehicle. With that emphasis, it was hypothesized that perceived risk would increase after as compared to before the training. In addition, this study examined whether risk perception was dependent on gender or on age. A mixed ANOVA performed on mean scores on the questionnaire yielded significant main effects for training (before/after), gender, and age. Higher levels of perceived risk were reported after the training as compared to before it, by females than by males, and by older adult drivers than by younger adult drivers. An analysis of the data of a smaller sample showed that the increment in perceived risk was still present 2 months after the training, and that it did not decrease significantly as compared to immediately after the training. These results are discussed in relation to relevant methodological issues and future research. PMID:18329423

  12. Leadership Research

    ERIC Educational Resources Information Center

    Kaplun, Irina

    2011-01-01

    The aim of this work is to explore recent research in the field of leadership as related to education and to link such research to a possible research project. This research project would focus on increasing standardized test scores in California schools focusing on the elementary school level through focusing on increasing reading competency and…

  13. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  14. Study of high-definition and stereoscopic head-aimed vision for improved teleoperation of an unmanned ground vehicle

    NASA Astrophysics Data System (ADS)

    Tyczka, Dale R.; Wright, Robert; Janiszewski, Brian; Chatten, Martha Jane; Bowen, Thomas A.; Skibba, Brian

    2012-06-01

    Nearly all explosive ordnance disposal robots in use today employ monoscopic standard-definition video cameras to relay live imagery from the robot to the operator. With this approach, operators must rely on shadows and other monoscopic depth cues in order to judge distances and object depths. Alternatively, they can contact an object with the robot's manipulator to determine its position, but that approach carries with it the risk of detonation from unintentionally disturbing the target or nearby objects. We recently completed a study in which high-definition (HD) and stereoscopic video cameras were used in addition to conventional standard-definition (SD) cameras in order to determine if higher resolutions and/or stereoscopic depth cues improve operators' overall performance of various unmanned ground vehicle (UGV) tasks. We also studied the effect that the different vision modes had on operator comfort. A total of six different head-aimed vision modes were used including normal-separation HD stereo, SD stereo, "micro" (reduced separation) SD stereo, HD mono, and SD mono (two types). In general, the study results support the expectation that higher resolution and stereoscopic vision aid UGV teleoperation, but the degree of improvement was found to depend on the specific task being performed; certain tasks derived notably more benefit from improved depth perception than others. This effort was sponsored by the Joint Ground Robotics Enterprise under Robotics Technology Consortium Agreement #69-200902 T01. Technical management was provided by the U.S. Air Force Research Laboratory's Robotics Research and Development Group at Tyndall AFB, Florida.

  15. Optimal policies aimed at stabilization of populations with logistic growth under human intervention.

    PubMed

    Cruz-Rivera, Erica; Vasilieva, Olga

    2013-02-01

    This work examines both positive and negative impacts that economic growth may have on the ecological dynamics and stability of a single biological species. Local extinction of the species may force the social planner to implement defensive expenditures aimed at conservation of the species population by means of habitat protection. The latter may lead to an ecological equilibrium that will be different from the natural equilibrium that would have arisen in the absence of human intervention. Moreover, the existence of such equilibrium is formally demonstrated and its stability properties are revised. Additionally, optimal-choice decision policies are constructed on the basis of Pontryagin's maximum principle. Under such policies together with initial abundance of the species, the growth trajectories will move the system towards the fixed point of maximum species abundance. PMID:22960017

  16. FP7 GLOWASIS - A new collaborative project aimed at pre-validation of a GMES Global Water Scarcity Information Service

    NASA Astrophysics Data System (ADS)

    Westerhoff, R.; Levizzani, V.; Pappenberger, F.; de Roo, A.; Lange, R. D.; Wagner, W.; Bierkens, M. F.; Ceran, M.; Weerts, A.; Sinclair, S.; Miguez-Macho, G.; Langius, E.; Glowasis Team

    2011-12-01

    The main objective of the project GLOWASIS is to pre-validate a GMES Global Service for Water Scarcity Information. It will be set up as a one-stop-shop portal for water scarcity information, in which focus is put on: - monitoring data from satellites and in-situ sensors; - improving forecasting models with improved monitoring data; - linking statistical water data in forecasting; - promotion of GMES Services and European satellites. In European and global pilots on the scale of river catchments it combines hydrological models with in-situ and satellite derived water cycle information, as well as government ruled statistical water demand data. By linking water demand and supply in three pilot studies with existing platforms (European Drought Observatory and PCR-GLOBWB) for medium- and long-term forecasting in Europe, Africa and worldwide, GLOWASIS' information contributes both in near-real time reporting for emerging drought events as well as in provision of climate change time series. By combining complex water cycle variables, governmental issues and economic relations with respect to water demand, GLOWASIS will aim for the needed streamlining of the wide variety of important water scarcity information. More awareness for the complexity of the water scarcity problem will be created and additional capabilities of satellite-measured water cycle parameters can be promoted. The service uses data from GMES Core Services LMCS Geoland2 and Marine Core Service MyOcean (land use, soil moisture, soil sealing, sea level), in-situ data from GEWEX' initiatives (i.e. International Soil Moisture network), agricultural and industrial water use and demand (statistical - AQUASTAT, SEEAW and modelled) and additional water-cycle information from existing global satellite services. In-depth interviews with a.o. EEA and the Australian Bureau of Meteorology are taking place. GLOWASIS will aim for an open source and open-standard information portal on water scarcity and use of modern

  17. AIM2 inflammasome mediates Arsenic-induced secretion of IL-1 β and IL-18

    PubMed Central

    Zhang, Mingfang; Qi, Yuanlin; Li, Hui; Cui, Jiajun; Dai, Lu; Frank, Jacqueline A.; Chen, Jian; Xu, Wenhua; Chen, Gang

    2016-01-01

    ABSTRACT Chronic sterile inflammation has been implicated in the pathogenesis of many cancers, including skin cancer. Chronic arsenic exposure is closely associated with the development of skin cancer. However, there is a lack of understanding how arsenic induces chronic inflammation in the skin. Interleukin-1 family cytokines play a central role in regulating immune and inflammatory response. IL-1α, IL-1β and IL-18 are three pro-inflammatory cytokines in IL-1 family. Their secretion, especially the secretion of IL-1β and IL-18, is regulated by inflammasomes which are multi-protein complexes containing sensor proteins, adaptor protein and caspase-1. The data from current study show sub-chronic arsenic exposure activates AIM2 inflammasome which in turn activates caspase-1 and enhances the secretion of IL-1β and IL-18 in HaCaT cells and the skin of BALB/c mice. In addition, arsenic-promoted activation of AIM2 inflammasome and increase of IL-1β/IL-18 production are inhibited by PKR inhibitor in HaCaT cells or in the skin of PKR mutant mice, indicating a potential role of PKR in arsenic-induced sterile inflammation. PMID:27471628

  18. AIM2 inflammasome mediates Arsenic-induced secretion of IL-1 β and IL-18.

    PubMed

    Zhang, Mingfang; Qi, Yuanlin; Li, Hui; Cui, Jiajun; Dai, Lu; Frank, Jacqueline A; Chen, Jian; Xu, Wenhua; Chen, Gang

    2016-06-01

    Chronic sterile inflammation has been implicated in the pathogenesis of many cancers, including skin cancer. Chronic arsenic exposure is closely associated with the development of skin cancer. However, there is a lack of understanding how arsenic induces chronic inflammation in the skin. Interleukin-1 family cytokines play a central role in regulating immune and inflammatory response. IL-1α, IL-1β and IL-18 are three pro-inflammatory cytokines in IL-1 family. Their secretion, especially the secretion of IL-1β and IL-18, is regulated by inflammasomes which are multi-protein complexes containing sensor proteins, adaptor protein and caspase-1. The data from current study show sub-chronic arsenic exposure activates AIM2 inflammasome which in turn activates caspase-1 and enhances the secretion of IL-1β and IL-18 in HaCaT cells and the skin of BALB/c mice. In addition, arsenic-promoted activation of AIM2 inflammasome and increase of IL-1β/IL-18 production are inhibited by PKR inhibitor in HaCaT cells or in the skin of PKR mutant mice, indicating a potential role of PKR in arsenic-induced sterile inflammation. PMID:27471628

  19. 42 CFR 66.115 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 66.115 Section 66.115 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL RESEARCH SERVICE AWARDS Direct Awards § 66.115 Additional conditions. The Secretary may...

  20. 42 CFR 66.115 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 66.115 Section 66.115 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL RESEARCH SERVICE AWARDS Direct Awards § 66.115 Additional conditions. The Secretary may...

  1. 42 CFR 66.115 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 66.115 Section 66.115 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL RESEARCH SERVICE AWARDS Direct Awards § 66.115 Additional conditions. The Secretary may...

  2. 42 CFR 52c.8 - Additional conditions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Additional conditions. 52c.8 Section 52c.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS MINORITY BIOMEDICAL RESEARCH SUPPORT PROGRAM § 52c.8 Additional conditions. The Secretary may with respect to any grant award...

  3. 42 CFR 52c.8 - Additional conditions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Additional conditions. 52c.8 Section 52c.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS MINORITY BIOMEDICAL RESEARCH SUPPORT PROGRAM § 52c.8 Additional conditions. The Secretary may with respect to any grant award...

  4. 42 CFR 52c.8 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 52c.8 Section 52c.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS MINORITY BIOMEDICAL RESEARCH SUPPORT PROGRAM § 52c.8 Additional conditions. The Secretary may with respect to any grant award...

  5. Aiming at a far target under different viewing conditions: visual control in basketball jump shooting.

    PubMed

    Oudejans, Raôul R D; van de Langenberg, Rolf W; Hutter, R I Vana

    2002-10-01

    Most research on visual search in aiming at far targets assumes preprogrammed motor control implying that relevant visual information is detected prior to the final shooting or throwing movements. Eye movement data indirectly support this claim for stationary tasks. Using the basketball jump shot as experimental task we investigated whether in dynamic tasks in which the target can be seen until ball release, continuous, instead of preprogrammed, motor control is possible. We tested this with the temporal occlusion paradigm: 10 expert shooters took shots under four viewing conditions, namely, no vision, full vision, early vision (vision occluded during the final +/-350 ms before ball release), and late vision (vision occluded until these final +/-350 ms). Late-vision shooting appeared to be as good as shooting with full vision while early-vision performance was severely impaired. The results imply that the final shooting movements were controlled by continuous detection and use of visual information until ball release. The data further suggest that visual and movement control of aiming at a far target develop in close correspondence with the style of execution. PMID:12450679

  6. The AIMS65 Score Is a Useful Predictor of Mortality in Patients with Nonvariceal Upper Gastrointestinal Bleeding: Urgent Endoscopy in Patients with High AIMS65 Scores

    PubMed Central

    Park, Sun Wook; Song, Young Wook; Tak, Dae Hyun; Ahn, Byung Moo; Kang, Sun Hyung; Moon, Hee Seok; Sung, Jae Kyu; Jeong, Hyun Yong

    2015-01-01

    Background/Aims: To validate the AIMS65 score for predicting mortality of patients with nonvariceal upper gastrointestinal bleeding and to evaluate the effectiveness of urgent (<8 hours) endoscopic procedures in patients with high AIMS65 scores. Methods: This was a 5-year single-center, retrospective study. Nonvariceal, upper gastrointestinal bleeding was assessed by using the AIM65 and Rockall scores. Scores for mortality were assessed by calculating the area under the receiver-operating characteristic curve (AUROC). Patients with high AIMS65 scores (≥2) were allocated to either the urgent or non-urgent endoscopic procedure group. In-hospital mortality, success of endoscopic procedure, recurrence of bleeding, admission period, and dose of transfusion were compared between groups. Results: A total of 634 patients were analyzed. The AIMS65 score successfully predicted mortality (AUROC=0.943; 95% confidence interval [CI], 0.876 to 0.99) and was superior to the Rockall score (AUROC=0.856; 95% CI, 0.743 to 0.969) in predicting mortality. The group with high AIMS65 score included 200 patients. The urgent endoscopic procedure group had reduced hospitalization periods (p<0.05) Conclusions: AIMS65 score may be useful in predicting mortality in patients with nonvariceal upper gastrointestinal bleeding. Urgent endoscopic procedures in patients with high scores may be related to reduced hospitalization periods. PMID:26668799

  7. 42 CFR 67.22 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 67.22 Section 67.22 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING AGENCY FOR HEALTH CARE POLICY AND RESEARCH GRANTS AND CONTRACTS Research Grants for Health...

  8. 42 CFR 67.22 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 67.22 Section 67.22 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING AGENCY FOR HEALTH CARE POLICY AND RESEARCH GRANTS AND CONTRACTS Research Grants for Health...

  9. 42 CFR 67.22 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 67.22 Section 67.22 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING AGENCY FOR HEALTH CARE POLICY AND RESEARCH GRANTS AND CONTRACTS Research Grants for Health...

  10. 42 CFR 67.22 - Additional conditions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Additional conditions. 67.22 Section 67.22 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING AGENCY FOR HEALTH CARE POLICY AND RESEARCH GRANTS AND CONTRACTS Research Grants for Health...

  11. 42 CFR 67.22 - Additional conditions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Additional conditions. 67.22 Section 67.22 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING AGENCY FOR HEALTH CARE POLICY AND RESEARCH GRANTS AND CONTRACTS Research Grants for Health...

  12. Proof-to-Print Match: Effectiveness of Substrate-Corrected Colorimetric Aims in Soft Proofing

    NASA Astrophysics Data System (ADS)

    Cheng, Peng

    Soft proofing is an effective solution for clients and printers that decreases production cost and cycle time. However, print buyers are increasingly specifying brighter papers, which contain optical brightening agents (OBAs). One potential concern facing adopters of soft proofing systems is that they fail to consider the influence of OBA when rendering color images. Proofing systems are largely based on existing published specifications and their ICC profiles. These specifications and ICC profiles --- such as SWOP 3 and GRACoL 2006--- do not account for the influence of OBA-loaded printing papers, and therefore could cause a mismatch between the soft proof and the final print. To improve the soft proofing performance, it is important to account for the influence of OBA in printed color and in soft proofing. This research project investigated the use of the substrate-corrected colorimetric aims (SCCA) as the source ICC profile to improve proofing color accuracy. By conducting psychometric experiments and analyzing with Chi-Square statistic, the research concludes that (a) OBA causes the mismatch between the default soft proof and the OBA-loaded print; (b) source ICC profiles, built from both a fully characterized dataset and an SCCA solution, can improve color match between the soft proof and the OBA-loaded print; and (c) color match between the soft proof and the print is image-dependent.

  13. Communicating Aims and Learning Goals in Physical Education: Part of a Subject for Learning?

    ERIC Educational Resources Information Center

    Redelius, Karin; Quennerstedt, Mikael; Öhman, Marie

    2015-01-01

    Based on a socio-cultural perspective on learning, the aim of this article is to examine how aims and learning goals are communicated in physical education (PE) practice. A special focus is on scrutinising how teaching practices are framed in terms of whether and how the aims and learning goals are made explicit or not to students. The aim is also…

  14. The Educational Aims of Primary MFL Teaching: An Investigation into the Perceived Importance of Linguistic Competence and Intercultural Understanding

    ERIC Educational Resources Information Center

    Woodgate-Jones, Alex

    2009-01-01

    Since the publication in England of the National Languages Strategy, there has been much debate concerning the aims of primary modern foreign language (PMFL) teaching. This article presents research into the beliefs of tutors and pre-service teachers in training on Postgraduate Certificate of Education (PGCE) courses with a PMFL specialism in…

  15. The Desegregation Aims and Demographic Contexts of Magnet Schools: How Parents Choose and Why Siting Policies Matter

    ERIC Educational Resources Information Center

    Smrekar, Claire; Honey, Ngaire

    2015-01-01

    This paper is designed to specify a set of new opportunities for educators, school administrators, and scholars to realize the practical aims and strategic advantages envisioned in magnet schools. The paper is divided into three distinct sections. In Section I, we examine the extensive research literature on parents' choice patterns and…

  16. Revisiting the Genetic Ancestry of Brazilians Using Autosomal AIM-Indels

    PubMed Central

    Saloum de Neves Manta, Fernanda; Pereira, Rui; Vianna, Romulo; Rodolfo Beuttenmüller de Araújo, Alfredo; Leite Góes Gitaí, Daniel; Aparecida da Silva, Dayse; de Vargas Wolfgramm, Eldamária; da Mota Pontes, Isabel; Ivan Aguiar, José; Ozório Moraes, Milton; Fagundes de Carvalho, Elizeu; Gusmão, Leonor

    2013-01-01

    There are many different studies that contribute to the global picture of the ethnic heterogeneity in Brazilian populations. These studies use different types of genetic markers and are focused on the comparison of populations at different levels. In some of them, each geographical region is treated as a single homogeneous population, whereas other studies create different subdivisions: political (e.g., pooling populations by State), demographic (e.g., urban and rural), or ethnic (e.g., culture, self-declaration, or skin colour). In this study, we performed an enhanced reassessment of the genetic ancestry of ~ 1,300 Brazilians characterised for 46 autosomal Ancestry Informative Markers (AIMs). In addition, 798 individuals from twelve Brazilian populations representing the five geographical macro-regions of Brazil were newly genotyped, including a Native American community and a rural Amazonian community. Following an increasing North to South gradient, European ancestry was the most prevalent in all urban populations (with values up to 74%). The populations in the North consisted of a significant proportion of Native American ancestry that was about two times higher than the African contribution. Conversely, in the Northeast, Center-West and Southeast, African ancestry was the second most prevalent. At an intrapopulation level, all urban populations were highly admixed, and most of the variation in ancestry proportions was observed between individuals within each population rather than among population. Nevertheless, individuals with a high proportion of Native American ancestry are only found in the samples from Terena and Santa Isabel. Our results allowed us to further refine the genetic landscape of Brazilians while establishing the basis for the effective application of an autosomal AIM panel in forensic casework and clinical association studies within the highly admixed Brazilian populations. PMID:24073242

  17. Effect of glutathione addition in sparkling wine.

    PubMed

    Webber, Vanessa; Dutra, Sandra Valduga; Spinelli, Fernanda Rodrigues; Marcon, Ângela Rossi; Carnieli, Gilberto João; Vanderlinde, Regina

    2014-09-15

    This study aims to evaluate the effect of the addition of glutathione (GSH) on secondary aromas and on the phenolic compounds of sparkling wine elaborated by traditional method. It was added 10 and 20 mg L(-1) of GSH to must and to base wine. The determination of aroma compounds was performed by gas chromatography. Phenolic compounds and glutathione content were analyzed by high performance liquid chromatography. Sparkling wines with addition of GSH to must showed lower levels of total phenolic compounds and hydroxycinnamic acids. Furthermore, the sparkling wine with addition of GSH to must showed higher levels of 2-phenylethanol, 3-methyl-1-butanol and diethyl succinate, and lower concentrations of ethyl decanoate, octanoic and decanoic acids. The GSH addition to the must show a greater influence on sparkling wine than to base wine, however GSH addition to base wine seems retain higher SO2 free levels. The concentration of GSH added showed no significant difference. PMID:24767072

  18. An Economic Aspect of the AVOID Programme: Analysis Using the AIM/CGE Model

    NASA Astrophysics Data System (ADS)

    Matsumoto, Ken'ichi; Masui, Toshihiko

    2010-05-01

    to derive the constraints for each gas over the 21st century. The main results provided to AVOID were carbon prices and GDP for each scenario case. About the carbon prices, the results show that the higher the emissions reduction rate and the earlier the peak, the higher the carbon prices will be, and the prices tend to be higher over time (536/tCO2 in 2100 for 2016.R5.L). These trends are quite different from those of the E3MG model which assumes constant carbon tax for each scenario (232/tCO2 in 2100 for 2016.R5.L). In addition, the higher carbon prices are necessary in the AIM/CGE model than the E3MG model, especially in the latter half of the century. About the GDP trends, the results indicate that negative GDP changes occur for all scenarios cases, and higher GDP damage is observed as the reduction rate becomes higher and the peak comes earlier (-7.04% in 2100 for 2016.R5.L). These trends are extremely different from those of the E3MG model which shows positive GDP effects (+4.89% in 2100 for 2016.R5.L). The differences of the results among the two models are caused by (1) technological change assumptions, (2) revenue recycling methodology, (3) timing of emissions cuts, and (4) modeling approaches. We expect to have a more detailed discussion at the session.

  19. Mobile Phone App Aimed at Improving Iron Intake and Bioavailability in Premenopausal Women: A Qualitative Evaluation

    PubMed Central

    Riddell, Lynn; Lim, Karen; Byrne, Linda K; Nowson, Caryl; Rigo, Manuela; Szymlek-Gay, Ewa A; Booth, Alison O

    2015-01-01

    Background Low iron intake can lead to iron deficiency, which can result in impaired health and iron-deficiency anemia. A mobile phone app, combining successful dietary strategies to increase bioavailable iron with strategies for behavior change, such as goal setting, monitoring, feedback, and resources for knowledge acquisition, was developed with the aim to increase bioavailable iron intake in premenopausal women. Objective To evaluate the content, usability, and acceptability of a mobile phone app designed to improve intake of bioavailable dietary iron. Methods Women aged 18-50 years with an Android mobile phone were invited to participate. Over a 2-week period women were asked to interact with the app. Following this period, semistructured focus groups with participants were conducted. Focus groups were audio recorded and analyzed via an inductive open-coding method using the qualitative analysis software NVivo 10. Themes were identified and frequency of code occurrence was calculated. Results Four focus groups (n=26) were conducted (age range 19-36 years, mean 24.7, SD 5.2). Two themes about the app’s functionality were identified (frequency of occurrence in brackets): interface and design (134) and usability (86). Four themes about the app’s components were identified: goal tracker (121), facts (78), photo diary (40), and games (46). A number of suggestions to improve the interface and design of the app were provided and will inform the ongoing development of the app. Conclusions This research indicates that participants are interested in iron and their health and are willing to use an app utilizing behavior change strategies to increase intake of bioavailable iron. The inclusion of information about the link between diet and health, monitoring and tracking of the achievement of dietary goals, and weekly reviews of goals were also seen as valuable components of the app and should be considered in mobile health apps aimed at adult women. PMID:26416479

  20. A systematic comparison of two new releases of exome sequencing products: the aim of use determines the choice of product.

    PubMed

    Altmüller, Janine; Motameny, Susanne; Becker, Christian; Thiele, Holger; Chatterjee, Sreyoshi; Wollnik, Bernd; Nürnberg, Peter

    2016-08-01

    We received early access to the newest releases of exome sequencing products, namely Agilent SureSelect v6 (Agilent, Santa Clara, CA, USA) and NimbleGen MedExome (Roche NimbleGen, Basel, Switzerland), and we conducted whole exome sequencing (WES) of several DNA samples with each of these products in order to assess their performance. Here, we provide a detailed evaluation of the original, normalized (with respect to the different target sizes), and trimmed data sets and compare them in terms of the amount of duplicates, the reads on target, and the enrichment evenness. In addition to these general statistics, we performed a detailed analysis of the frequently mutated and newly described genes found in 'The Deciphering Developmental Disorders Study' published very recently (Fitzgerald, T.W., Gerety, S.S., Jones, W.D., van Kogelenberg, M., King, D.A., McRae, J., Morley, K.I., Parthiban, V., Al-Turki, S., Ambridge, K., et al. (2015). Large-scale discovery of novel genetic causes of developmental disorders. Nature 519, 223-228.). In our comparison, the Agilent v6 exome performs better than the NimbleGen's MedExome both in terms of efficiency and evenness of coverage distribution. With its larger target size, it is also more comprehensive, and therefore the better choice in research projects that aim to identify novel disease-associated genes. In contrast, if the exomes are mainly used in a diagnostic setting, we see advantages for the new NimbleGen MedExome. We find a superior coverage here in those genes of high clinical relevance that likely allows for a better detection of relevant, disease-causing mutations. PMID:27021259

  1. Observation of the Effectiveness of Drama Method in Helping to Acquire the Addition-Subtraction Skills by Children at Preschool Phase

    ERIC Educational Resources Information Center

    Soydan, Sema; Quadir, Seher Ersoy

    2013-01-01

    Principal aim of this study is to show the effectiveness of the program prepared by researchers in order to enable 6 year-old children attending pre-school educational institutions to effectively gain addition subtraction skills through a drama-related method. The work group in the research comprised of 80 kids who continued their education in…

  2. Three-dimensional manual responses to unexpected target perturbations during rapid aiming.

    PubMed

    Hansen, Steve; Elliott, Digby

    2009-01-01

    The authors examined the execution of rapid aiming movements to targets that changed size and position. Participants viewed a medium-size target during movement preparation. The target became smaller or larger at movement initiation on size perturbation trials. The target moved closer or farther away from the home position on amplitude perturbation trials. The authors examined-in addition to several performance measures-the volume of 3-dimensional ellipsoids to quantify between-trials variability. In the size protocol, men executed movements in a similar manner irrespective of condition. In contrast, women exhibited less variability when target size increased. In the amplitude protocol, men moved inconsistently in the latter portion of the trajectory when targets became proximal. Men also failed to adjust for the perturbation on several trials. In comparison, women were more variable in the initial portions of the trajectory when the target became distal. Although men and women performed their movements in a similar duration, the trajectory and error analyses indicated different behaviors. Specifically, women made more rapid and efficient adjustments to their trajectories on the basis of concurrent visual information. In contrast, men executed movements on the basis of the visual information initially presented and then made adjustments, rather than gathering visual information and executing adjustments throughout the trajectory. PMID:19073468

  3. Screening of thermotolerant and thermophilic fungi aiming β-xylosidase and arabinanase production

    PubMed Central

    Benassi, Vivian Machado; de Lucas, Rosymar Coutinho; Jorge, João Atílio; Polizeli, Maria de Lourdes Teixeira de Moraes

    2014-01-01

    Plant cell wall is mainly composed by cellulose, hemicellulose and lignin. The heterogeneous structure and composition of the hemicellulose are key impediments to its depolymerization and subsequent use in fermentation processes. Thus, this study aimed to perform a screening of thermophilic and thermotolerant filamentous fungi collected from different regions of the São Paulo state, and analyze the production of β-xylosidase and arabinanase at different temperatures. These enzymes are important to cell wall degradation and synthesis of end products as xylose and arabinose, respectively, which are significant sugars to fermentation and ethanol production. A total of 12 fungal species were analyzed and 9 of them grew at 45 °C, suggesting a thermophilic or thermotolerant character. Additionally Aspergillus thermomutatus anamorph of Neosartorya and A. parasiticus grew at 50 °C. Aspergillus niger and Aspergillus thermomutatus were the filamentous fungi with the most expressive production of β-xylosidase and arabinanase, respectively. In general for most of the tested microorganisms, β-xylosidase and arabinanase activities from mycelial extract (intracellular form) were higher in cultures grown at high temperatures (35–40 °C), while the correspondent extracellular activities were favorably secreted from cultures at 30 °C. This study contributes to catalogue isolated fungi of the state of São Paulo, and these findings could be promising sources for thermophilic and thermotolerant microorganisms, which are industrially important due to their enzymes. PMID:25763055

  4. Geriatrics and the triple aim: defining preventable hospitalizations in the long-term care population.

    PubMed

    Ouslander, Joseph G; Maslow, Katie

    2012-12-01

    Reducing preventable hospitalizations is fundamental to the "triple aim" of improving care, improving health, and reducing costs. New federal government initiatives that create strong pressure to reduce such hospitalizations are being or will soon be implemented. These initiatives use quality measures to define which hospitalizations are preventable. Reducing hospitalizations could greatly benefit frail and chronically ill adults and older people who receive long-term care (LTC) because they often experience negative effects of hospitalization, including hospital-acquired conditions, morbidity, and loss of functional abilities. Conversely, reducing hospitalizations could mean that some people will not receive hospital care they need, especially if the selected measures do not adequately define hospitalizations that can be prevented without jeopardizing the person's health and safety. An extensive literature search identified 250 measures of preventable hospitalizations, but the measures have not been validated in the LTC population and generally do not account for comorbidity or the capacity of various LTC settings to provide the required care without hospitalization. Additional efforts are needed to develop measures that accurately differentiate preventable from necessary hospitalizations for the LTC population, are transparent and fair to providers, and minimize the potential for gaming and unintended consequences. As the new initiatives take effect, it is critical to monitor their effect and to develop and disseminate training and resources to support the many community- and institution-based healthcare professionals and emergency department staff involved in decisions about hospitalization for this population. PMID:23194066

  5. Task difficulty and inertial properties of hand-held tools: An assessment of their concurrent effects on precision aiming.

    PubMed

    Silva, Paula L; Bootsma, Reinoud J; Figueiredo, Priscilla Rezende Pereira; Avelar, Bruna Silva; de Andrade, André Gustavo Pereira; Fonseca, Sérgio T; Mancini, Marisa Cotta

    2016-08-01

    Aiming hand-held tools at targets in space entails adjustments in the dynamical organization of aiming patterns according to the required precision. We asked whether and how these adjustments are modified by the tool's mass distribution. Twelve participants performed reciprocal aiming movements with a 50-cm long wooden probe. Kinematic patterns of probe movements were used as a window into the behavioral dynamic underlying performance of a reciprocal aiming task. We crossed three levels of task difficulty (IDs 2.8, 4.5 and 6.1) with two types of probe varying in their mass distribution (proximal vs distal loading). Movement duration was affected by task difficulty and probe loading (shorter for larger targets and proximal probe loading). Progressive deviations from a sinusoidal movement pattern were observed as task difficulty increased. Such deviations were more pronounced with proximal probe loading. Results point to a higher degree of non-linearity in aiming dynamics when the probe was loaded proximally, which might reflect employment of additional perceptual-motor processes to control the position of its less stable tip at the vicinity of the targets. More generally, the effects of probe loading on aiming pattern and dynamics suggest that perceptual-motor processes responding to task level constraints are sensitive to, and not independent from, biomechanical, end-effector constraints. PMID:27219738

  6. Is the TOEFL Exam Aimed at Everyone? Research Considerations in the Training and Application of the TOEFL Exam Abroad

    ERIC Educational Resources Information Center

    Garcia Laborda, Jesus

    2008-01-01

    In recent years, the Educational Testing System organisation has developed two models of the computer-based Test of English as a Foreign Language (TOEFL). However, the computerization of the test has shown a number of problems according to the testees' origin. This paper suggests some of these problems after conducting short interviews with four…

  7. Action Research Aiming at Improving High School Science Teachers' Teaching Proficiencies through the Development of Instructional Modules

    ERIC Educational Resources Information Center

    Guo, Chorng-Jee; Chang, Huey-Por

    2004-01-01

    The new Science and Technology Curriculum Framework recently issued in Taiwan advocates the teaching of integrated science and technology with greater emphasis on basic skills. Science teachers are not used to teach in this way, they need different abilities and skills in order to do so. Using various effective professional development strategies,…

  8. Research Aimed at Improving Both Mood and Weight (RAINBOW) in Primary Care: A Type 1 hybrid design randomized controlled trial

    PubMed Central

    Ma, Jun; Yank, Veronica; Lv, Nan; Goldhaber-Fiebert, Jeremy D.; Lewis, Megan A.; Kramer, M. Kaye; Snowden, Mark B.; Rosas, Lisa G.; Xiao, Lan; Blonstein, Andrea C.

    2015-01-01

    Effective interventions targeting comorbid obesity and depression are critical given the increasing prevalence and worsened outcomes for patients with both conditions. RAINBOW is a type 1 hybrid design randomized controlled trial. The objective is to evaluate the clinical and cost effectiveness and implementation potential of an integrated, technology-enhanced, collaborative care model for treating comorbid obesity and depression in primary care. Obese and depressed adults (n=404) will be randomized to usual care enhanced with the provision of a pedometer and information about the health system’s services for mood or weight management (control) or with the Integrated Coaching for Better Mood and Weight (I-CARE) program (intervention). The 12-month I-CARE program synergistically integrates two proven behavioral interventions: problem-solving therapy with as-needed intensification of pharmacotherapy for depression (PEARLS) and standardized behavioral treatment for obesity (Group Lifestyle Balance™). It utilizes traditional (e.g., office visits and phone consults) and emerging care delivery modalities (e.g., patient web portal and mobile applications). Follow-up assessments will occur at 6, 12, 18, and 24 months. We hypothesize that compared with controls, I-CARE participants will have greater improvements in weight and depression severity measured by the 20-item Depression Symptom Checklist at 12 months, which will be sustained at 24 months. We will also assess I-CARE’s cost-effectiveness and use mixed methods to examine its potential for reach, adoption, implementation, and maintenance. This study offers the potential to change how obese and depressed adults are treated—through a new model of accessible and integrative lifestyle medicine and mental health expertise—in primary care. PMID:26096714

  9. Research aimed at improving both mood and weight (RAINBOW) in primary care: A type 1 hybrid design randomized controlled trial.

    PubMed

    Ma, Jun; Yank, Veronica; Lv, Nan; Goldhaber-Fiebert, Jeremy D; Lewis, Megan A; Kramer, M Kaye; Snowden, Mark B; Rosas, Lisa G; Xiao, Lan; Blonstein, Andrea C

    2015-07-01

    Effective interventions targeting comorbid obesity and depression are critical given the increasing prevalence and worsened outcomes for patients with both conditions. RAINBOW is a type 1 hybrid design randomized controlled trial. The objective is to evaluate the clinical and cost effectiveness and implementation potential of an integrated, technology-enhanced, collaborative care model for treating comorbid obesity and depression in primary care. Obese and depressed adults (n = 404) will be randomized to usual care enhanced with the provision of a pedometer and information about the health system's services for mood or weight management (control) or with the Integrated Coaching for Better Mood and Weight (I-CARE) program (intervention). The 12-month I-CARE program synergistically integrates two proven behavioral interventions: problem-solving therapy with as-needed intensification of pharmacotherapy for depression (PEARLS) and standardized behavioral treatment for obesity (Group Lifestyle Balance(™)). It utilizes traditional (e.g., office visits and phone consults) and emerging care delivery modalities (e.g., patient web portal and mobile applications). Follow-up assessments will occur at 6, 12, 18, and 24 months. We hypothesize that compared with controls, I-CARE participants will have greater improvements in weight and depression severity measured by the 20-item Depression Symptom Checklist at 12 months, which will be sustained at 24 months. We will also assess I-CARE's cost-effectiveness and use mixed methods to examine its potential for reach, adoption, implementation, and maintenance. This study offers the potential to change how obese and depressed adults are treated-through a new model of accessible and integrative lifestyle medicine and mental health expertise-in primary care. PMID:26096714

  10. Democracy and School Math: Teacher Belief-Practice Tensions and the Problem of Empirical Research on Educational Aims

    ERIC Educational Resources Information Center

    Stemhagen, Kurt

    2011-01-01

    This article describes an empirical project that studied fourth- through- eighth- grade math teachers' beliefs about teaching and learning and about the role of teaching and learning in broader society. Specifically, it examined relationships between teachers' reported beliefs and their use of transmittal, constructivist, and democratic classroom…

  11. Hypersonic research engine project. Phase 2: Aerothermodynamic Integration Model (AIM) data reduction computer program, data item no. 54.16

    NASA Technical Reports Server (NTRS)

    Gaede, A. E.; Platte, W. (Editor)

    1975-01-01

    The data reduction program used to analyze the performance of the Aerothermodynamic Integration Model is described. Routines to acquire, calibrate, and interpolate the test data, to calculate the axial components of the pressure area integrals and the skin function coefficients, and to report the raw data in engineering units are included along with routines to calculate flow conditions in the wind tunnel, inlet, combustor, and nozzle, and the overall engine performance. Various subroutines were modified and used to obtain species concentrations and transport properties in chemical equilibrium at each of the internal and external engine stations. It is recommended that future test plans include the configuration, calibration, and channel assignment data on a magnetic tape generated at the test site immediately before or after a test, and that the data reduction program be designed to operate in a batch environment.

  12. Flow processes in overexpanded chemical rocket nozzles. Part 3: Methods for the aimed flow separation and side load reduction

    NASA Technical Reports Server (NTRS)

    Schmucker, R. H.

    1983-01-01

    Methods aimed at reduction of overexpansion and side load resulting from asymmetric flow separation for rocket nozzles with a high opening ratio are described. The methods employ additional measures for nozzles with a fixed opening ratio. The flow separation can be controlled by several types of nozzle inserts, the properties of which are discussed. Side loads and overexpansion can be reduced by adapting the shape of the nozzle and taking other additional measures for controlled separation of the boundary layer, such as trip wires.

  13. Establishing an Anaesthesia and Intensive Care partnership and aiming for national impact in Tanzania.

    PubMed

    Ulisubisya, Mpoki; Jörnvall, Henrik; Irestedt, Lars; Baker, Tim

    2016-01-01

    Anaesthesia and Intensive Care is a neglected specialty in low-income countries. There is an acute shortage of health workers - several low-income countries have less than 1 anaesthesia provider per 100,000 population. Only 1.5% of hospitals in Africa have the intensive care resources needed for managing patients with sepsis. Health partnerships between institutions in high and low-income countries have been proposed as an effective way to strengthen health systems. The aim of this article is to describe the origin and conduct of a health partnership in Anaesthesia and Intensive Care between institutions in Tanzania and Sweden and how the partnership has expanded to have an impact at regional and national levels.The Muhimbili-Karolinska Anaesthesia and Intensive Care Collaboration was initiated in 2008 on the request of the Executive Director of Muhimbili National Hospital in Dar es Salaam. The partnership has conducted training courses, exchanges, research projects and introduced new equipment, routines and guidelines. The partnership has expanded to include all hospitals in Dar es Salaam. Through the newly formed Life Support Foundation, the partnership has had a national impact assisting the reanimation of the Society of Anaesthesiologists of Tanzania and has seen a marked increase of the number of young doctors choosing a residency in Anaesthesia and Intensive Care. PMID:26993790

  14. Regulating migrant maternity: nursing and midwifery's emancipatory aims and assimilatory practices.

    PubMed

    DeSouza, Ruth

    2013-12-01

    In contemporary Western societies, birthing is framed as transformative for mothers; however, it is also a site for the regulation of women and the exercise of power relations by health professionals. Nursing scholarship often frames migrant mothers as a problem, yet nurses are imbricated within systems of scrutiny and regulation that are unevenly imposed on 'other' mothers. Discourses deployed by New Zealand Plunket nurses (who provide a universal 'well child' health service) to frame their understandings of migrant mothers were analysed using discourse analysis and concepts of power drawn from the work of French philosopher Michel Foucault, read through a postcolonial feminist perspective. This research shows how Plunket nurses draw on liberal feminist discourses, which have emancipatory aims but reflect assimilatory practices, paradoxically disempowering women who do not subscribe to ideals of individual autonomy. Consequently, the migrant mother, her family and new baby are brought into a neoliberal project of maternal improvement through surveillance. This project--enacted differentially but consistently among nurses--attempts to alter maternal and familial relationships by 'improving' mothering. Feminist critiques of patriarchy in maternity must be supplemented by a critique of the implicitly western subject of maternity to make empowerment a possibility for all mothers. PMID:23336314

  15. Recycling of Organic Waste Sludge by Hydrothermal Dry Steam Aiming for Adsorbent

    NASA Astrophysics Data System (ADS)

    Hoshikawa, Hisahiro; Hayakawa, Tomoki; Yamasaki, Nakamichi

    2006-05-01

    Global warming becomes more serious problem today. We have to develop new technology for new energy or fixation of carbon dioxide. Biomass is considered to be one of new energies. Methane fermentation is a method to make methane from biomass, such as garbage and fecal of farm animals, by methane fermentation bacteria. It has a problem, however, that bacteria are deactivated due to ammonia, which is made by itself. And much methane fermentation residue is incinerated. Therefore recycling methane fermentation residue is important for effective use of biomass. We research hydrothermal process. Dry steam means unsaturated vapor, we call. It demands a temperature less than 400 °C. And it is expected to accelerate dehydration effect, decompose and extract the organic matter, and make porous material. Thus, we try to apply the dry steam to recycling of organic waste sludge aiming for absorbent. Experiments were conducted at 250-350 °C in nitrogen atmosphere. The carbon products are analyzed by CHNS elemental analysis, and Thermogravimetry. The extractives are analyzed by gas chromatograph.

  16. What Place Does Science Have in an Aims-Based Curriculum?

    ERIC Educational Resources Information Center

    Reiss, Michael J.

    2014-01-01

    This article argues that school curriculum development should start with aims rather than with subjects and that the fundamental aims of school education should be to enable each learner to lead a personally flourishing life and to help others to do so too. These overarching aims give rise to more specific ones by considering how human flourishing…

  17. Arizona's Instrument to Measure Standards (AIMS DPA). Student Guide. Grade 7

    ERIC Educational Resources Information Center

    Arizona Department of Education, 2006

    2006-01-01

    Arizona's Instrument to Measure Standards Dual Purpose Assessment (AIMS DPA) is a combination of two separate tests. One test is AIMS, which measures how well the student knows the reading, writing, and mathematics content that all Arizona students in the student's grade level are expected to know and be able to do. AIMS DPA includes…

  18. 78 FR 69885 - AIM Growth Series (Invesco Growth Series), et al.; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-21

    ... COMMISSION AIM Growth Series (Invesco Growth Series), et al.; Notice of Application November 15, 2013. AGENCY... approval and would grant relief from certain disclosure requirements. APPLICANTS: AIM Growth Series (Invesco Growth Series) and AIM Investment Funds (Invesco Investment Funds) (each, a ``Trust''),...

  19. Theory of atomic additivity in molecular hyperpolizabilities

    NASA Technical Reports Server (NTRS)

    Baird, James K.

    1987-01-01

    Hyperpolarizability is a function of frequency. This is called dispersion. Because of the Kramers-Kronig relations, researchers expect that a material that is dispersing light is also absorbing it. Where there is both dispersion and absorption, the molecular polarizabilities are complex functions of the frequency. This led researchers to consider atomic additivity in both the real and imaginary parts of the ordinary and hyperpolarizabilities. This effort is desirable not only from a theoretical point of view, but also because of the existence of a large body of complex refractive index data, which may be used to test the additivity principle with the complex valued ordinary dipole polarizability.

  20. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  1. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  2. The Pill vs. the Sword: Additional Considerations

    PubMed Central

    Lottes, Ilsa L.

    2015-01-01

    In this paper, I present additional information for policy-makers and researchers to consider in response to the view proposed by Potts et al that "the pill is mightier than the sword." I identify states with both high rates of terrorism and a youth bulge and discuss correlates of both these societal characteristics. The research examined supports the view that factors other than access to family planning are more important in facilitating terrorism. PMID:26673473

  3. Intergenerational Practice: Outcomes and Effectiveness. LGA Research Report

    ERIC Educational Resources Information Center

    Martin, Kerry; Springate, Iain; Atkinson, Mary

    2010-01-01

    This research looked at five intergenerational projects focusing on football, arts, knife crime, living history and personal and social education. Two projects ran in schools, one in a health centre, one in a youth drop-in centre and one at a football club. Each project had its own aims, but in addition to these, the projects aimed to improve…

  4. Evaluating additives and impurities in zinc electrowinning

    NASA Astrophysics Data System (ADS)

    Gonzalez-Dominguez, J. A.; Lew, R. W.

    1995-01-01

    The zinc electrowinning (EW) process is very sensitive to the presence of impurities. There is only one EW plant in the world that we know of that operates at moderate current efficiency and deposition times without using any additives. All the others must use them continuously. Additives allow zinc EW to occur at high current efficiencies while suppressing excessive acid mist formation. The study of the electrochemical effects of additives in zinc EW is not straightforward. This article presents a review of the experimental techniques currently used at Cominco Research: Cyclic voltammetry, Hull cells, laboratory and mini-cell electrowinning techniques are all described and their relationship to the industrial operation is discussed.

  5. Revitalising the Metropolit 1953 Danish male birth cohort: background, aims and design.

    PubMed

    Osler, Merete; Andersen, Anne-Marie Nybo; Lund, Rikke; Batty, G David; Hougaard, Charlotte Ørsted; Damsgaard, Mogens Trab; Due, Pernille; Holstein, Bjørn E

    2004-09-01

    Recent research indicates that factors operating during childhood are related to adult health. Thus, longitudinal studies with information on subsequent phases may be key to understanding later health outcomes. The main objective of this paper is to describe the history and design of a Danish birth cohort, and its revitalisation. In 1965, information from birth certificates for 11 591 of a total of 12 270 males born in 1953 in the Metropolitan area of Copenhagen, Denmark were traced. These boys were the study population of a sociological investigation conducted with the aim of describing social mobility. At age 12 years, 9537 of these cohort members completed a questionnaire in school, which included cognitive measures and information on social aspirations and leisure time activities. In 1966 educational performance tests were administered for these boys and, in 1968, mothers of 2890 cohort members were interviewed regarding family social backgrounds. With the establishment of the Civil Registration System (CRS) in 1968, it was possible to identify 11 532 cohort members. In 2002 we began the process of revitalising this study with the aim of investigating the influence of early life factors on later health. We succeeded in ascertaining the vital status of all subjects in the CRS. This showed that 863 subjects had died between 1968 and 2002. Linkages to the Register of Causes of Death, the National Hospital Register, Psychiatric Central Register and Danish Cancer Registry have been completed. In total, 7969 cohort members had been hospitalised for any somatic illness and, according to the Psychiatric Central Register, 1382 men had been admitted to a psychiatric hospital or ward. In the Cancer Registry we found 363 of our study participants. Analyses exploring the influence of social conditions in early life, birth dimensions, and childhood cognition on adult health experience are at various stages of completion. A questionnaire-based postal follow-up survey is

  6. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  7. From Addition to Multiplication ... and Back: The Development of Students' Additive and Multiplicative Reasoning Skills

    ERIC Educational Resources Information Center

    Van Dooren, Wim; De Bock, Dirk; Verschaffel, Lieven

    2010-01-01

    This study builds on two lines of research that have so far developed largely separately: the use of additive methods to solve proportional word problems and the use of proportional methods to solve additive word problems. We investigated the development with age of both kinds of erroneous solution methods. We gave a test containing missing-value…

  8. An Opening Chapter of the First Generation of Artificial Intelligence in Medicine: The First Rutgers AIM Workshop, June 1975.

    PubMed

    Kulikowski, C A

    2015-08-13

    The first generation of Artificial Intelligence (AI) in Medicine methods were developed in the early 1970's drawing on insights about problem solving in AI. They developed new ways of representing structured expert knowledge about clinical and biomedical problems using causal, taxonomic, associational, rule, and frame-based models. By 1975, several prototype systems had been developed and clinically tested, and the Rutgers Research Resource on Computers in Biomedicine hosted the first in a series of workshops on AI in Medicine that helped researchers and clinicians share their ideas, demonstrate their models, and comment on the prospects for the field. These developments and the workshops themselves benefited considerably from Stanford's SUMEX-AIM pioneering experiment in biomedical computer networking. This paper focuses on discussions about issues at the intersection of medicine and artificial intelligence that took place during the presentations and panels at the First Rutgers AIM Workshop in New Brunswick, New Jersey from June 14 to 17, 1975. PMID:26123911

  9. Conformation switching of AIM2 PYD domain revealed by NMR relaxation and MD simulation.

    PubMed

    Wang, Haobo; Yang, Lijiang; Niu, Xiaogang

    2016-04-29

    Protein absent in melanoma 2 (AIM2) is a double-strand DNA (ds DNA) sensor mainly located in cytoplasm of cell. It includes one N terminal PYD domain and one C terminal HIN domain. When the ds DNA such as DNA viruses and bacteria entered cytoplasm, the HIN domain of AIM2 will recognize and bind to DNA, and the PYD domain will bind to ASC protein which will result in the formation of AIM2 inflammasome. Three AIM2 PYD domain structures have been solved, but every structure yields a unique conformation around the α3 helix region. To understand why different AIM2 PYD structures show different conformations in this region, we use NMR relaxation techniques to study the backbone dynamics of mouse AIM2 PYD domain and perform molecular dynamics (MD) simulations on both mouse and human AIM2 PYD structures. Our results indicate that this region is highly flexible in both mouse and human AIM2 PYD domains, and the PYD domain may exist as a conformation ensemble in solution. Different environment makes the population vary among pre-existing conformational substrates of the ensemble, which may be the reason why different AIM2 PYD structures were observed under different conditions. Further docking analysis reveals that the conformation switching may be important for the autoinhibition of the AIM2 protein. PMID:27037024

  10. Perceptions about community applications of RE-AIM in the promotion of evidence-based programs for older adults.

    PubMed

    Ory, Marcia G; Altpeter, Mary; Belza, Basia; Helduser, Janet; Zhang, Chen; Smith, Matthew Lee

    2015-03-01

    Despite the growing literature about the RE-AIM framework as a planning, implementation, and evaluation tool, little is known about practitioners' adoption of the framework, confidence to utilize framework elements, or perceptions of its usefulness. To assess how RE-AIM was implemented by state aging service providers and public health partners, data were collected using an Internet-delivered, cross-sectional survey from 40 stakeholders in 27 funded states in an evidence-based disease prevention initiative for older adults. Most participants agreed the framework was useful for planning, implementation, and evaluation and relevant for evaluators, providers, community leaders, and policy makers. Yet nearly half felt monitoring RE-AIM requirements requires special expertise, and one third felt the different RE-AIM elements were difficult to measure. Findings indicate the RE-AIM's appropriateness and utility for planning and evaluating the dissemination of evidence-based programs to older adults; however, additional trainings, resources, and technical assistance are warranted to enhance uptake in community-wide intervention efforts. PMID:25015082

  11. Research review for information management

    NASA Technical Reports Server (NTRS)

    Bishop, Peter C.

    1988-01-01

    The goal of RICIS research in information management is to apply currently available technology to existing problems in information management. Research projects include the following: the Space Business Research Center (SBRC), the Management Information and Decision Support Environment (MIDSE), and the investigation of visual interface technology. Several additional projects issued reports. New projects include the following: (1) the AdaNET project to develop a technology transfer network for software engineering and the Ada programming language; and (2) work on designing a communication system for the Space Station Project Office at JSC. The central aim of all projects is to use information technology to help people work more productively.

  12. Aiming to improve the quality of primary mental health care: developing an intervention for underserved communities

    PubMed Central

    2014-01-01

    Background The purpose of the study was to improve the quality of primary mental healthcare in underserved communities through involvement with the wider primary care team members and local community agencies. Methods We developed training intended for all GP practice staff which included elements of knowledge transfer, systems review and active linking. Seven GP Practices in four localities (North West England, UK) took part in the training. Qualitative evaluation was conducted using thirteen semi-structured interviews and two focus groups in six of the participating practices; analysis used principles of Framework Analysis. Results Staff who had engaged with the training programme reported increased awareness, recognition and respect for the needs of patients from under-served communities. We received reports of changes in style and content of interactions, particularly amongst receptionists, and evidence of system change. In addition, the training program increased awareness of – and encouraged signposting to - community agencies within the practice locality. Conclusions This study demonstrates how engaging with practices and delivering training in a changing health care system might best be attempted. The importance of engaging with community agencies is clear, as is the use of the AMP model as a template for further research. PMID:24741996

  13. A Public Opinion Survey on Correctional Education: Does Additional Information on Efficacy Lead to Additional Support?

    ERIC Educational Resources Information Center

    Waterland, Keri Lynn

    2009-01-01

    Though much research has been done on the efficacy of correctional education on reducing recidivism rates for prison inmates, there is little research on the effect that information about the efficacy of correctional education has on public opinion. This study examined whether providing additional information regarding the efficacy of correctional…

  14. A Study of Additional Costs of Second Language Instruction.

    ERIC Educational Resources Information Center

    McEwen, Nelly

    A study was conducted whose primary aim was to identify and explain additional costs incurred by Alberta, Canada school jurisdictions providing second language instruction in 1980. Additional costs were defined as those which would not have been incurred had the second language program not been in existence. Three types of additional costs were…

  15. 77 FR 34025 - Procurement List; Addition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-08

    ... INFORMATION: ] Addition On 4/132012 (77 FR 22289-22290), the Committee for Purchase From People Who Are Blind... & Development Center (ERDC), Construction Engineering Research Lab (CERL), 2902 Newmark Drive, Champaign, IL. AT & T Building, 3001 Newmark Drive, Champaign, IL. NPA: The Chicago Lighthouse for People Who Are...

  16. 42 CFR 86.20 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Training Grants § 86.20 Additional conditions. The Secretary may with respect...

  17. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  18. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  19. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  20. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  1. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  2. 42 CFR 68c.15 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 68c.15 Section 68c.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTE OF CHILD HEALTH AND HUMAN DEVELOPMENT CONTRACEPTION AND INFERTILITY RESEARCH...

  3. 42 CFR 68c.15 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 68c.15 Section 68c.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTE OF CHILD HEALTH AND HUMAN DEVELOPMENT CONTRACEPTION AND INFERTILITY RESEARCH...

  4. 42 CFR 68c.15 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 68c.15 Section 68c.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTE OF CHILD HEALTH AND HUMAN DEVELOPMENT CONTRACEPTION AND INFERTILITY RESEARCH...

  5. Children's Profiles of Addition and Subtraction Understanding

    ERIC Educational Resources Information Center

    Canobi, Katherine H.

    2005-01-01

    The current research explored children's ability to recognize and explain different concepts both with and without reference to physical objects so as to provide insight into the development of children's addition and subtraction understanding. In Study 1, 72 7- to 9-year-olds judged and explained a puppet's activities involving three conceptual…

  6. 42 CFR 52c.8 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 52c.8 Section 52c.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS MINORITY BIOMEDICAL RESEARCH... health, or the conservation of grant funds....

  7. 42 CFR 52c.8 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 52c.8 Section 52c.8 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS MINORITY BIOMEDICAL RESEARCH... health, or the conservation of grant funds....

  8. English as an Additional Language: Changing Perspectives.

    ERIC Educational Resources Information Center

    Leung, Constant, Ed.; Cable, Carrie, Ed.

    This volume highlights the language and learning needs of pupils with English as an additional language in the United Kingdom. It includes chapters by British teachers and researchers working in this field. The book addresses a number of issues of interest to practitioners, scholars, teacher educators, and policy makers. Each chapter is prefaced…

  9. 76 FR 65501 - Procurement List Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-21

    ...: Grounds Maintenance, Air Force Research Laboratory Stockbridge Test Facility, 5251 Burleson Road, Oneida... INFORMATION: Additions On 8/19/2011 (76 FR 51955-51956) and 8/26/2011 (76 FR 53419-53420), the Committee for..., FA8751 AFRL RIKO, Rome, NY. Patricia Briscoe, Deputy Director, Business Operations, Pricing...

  10. 42 CFR 68a.15 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 68a.15 Section 68a.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTES OF HEALTH (NIH) CLINICAL RESEARCH LOAN REPAYMENT PROGRAM FOR INDIVIDUALS FROM DISADVANTAGED BACKGROUNDS (CR-LRP) §...

  11. 42 CFR 68a.15 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 68a.15 Section 68a.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTES OF HEALTH (NIH) CLINICAL RESEARCH LOAN REPAYMENT PROGRAM FOR INDIVIDUALS...

  12. 42 CFR 68a.15 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 68a.15 Section 68a.15 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES FELLOWSHIPS, INTERNSHIPS, TRAINING NATIONAL INSTITUTES OF HEALTH (NIH) CLINICAL RESEARCH LOAN REPAYMENT PROGRAM FOR INDIVIDUALS...

  13. An automated model-based aim point distribution system for solar towers

    NASA Astrophysics Data System (ADS)

    Schwarzbözl, Peter; Rong, Amadeus; Macke, Ansgar; Säck, Jan-Peter; Ulmer, Steffen

    2016-05-01

    Distribution of heliostat aim points is a major task during central receiver operation, as the flux distribution produced by the heliostats varies continuously with time. Known methods for aim point distribution are mostly based on simple aim point patterns and focus on control strategies to meet local temperature and flux limits of the receiver. Lowering the peak flux on the receiver to avoid hot spots and maximizing thermal output are obviously competing targets that call for a comprehensive optimization process. This paper presents a model-based method for online aim point optimization that includes the current heliostat field mirror quality derived through an automated deflectometric measurement process.

  14. A role for the apoptosis inhibitory factor AIM/Spalpha/Api6 in atherosclerosis development.

    PubMed

    Arai, Satoko; Shelton, John M; Chen, Mingyi; Bradley, Michelle N; Castrillo, Antonio; Bookout, Angie L; Mak, Puiying A; Edwards, Peter A; Mangelsdorf, David J; Tontonoz, Peter; Miyazaki, Toru

    2005-03-01

    Macrophages play a central role in the development of atherosclerosis through the accumulation of oxidized LDL (oxLDL). AIM (Spalpha/Api6) has previously been shown to promote macrophage survival; however, its function in atherogenesis is unknown. Here we identify AIM as a critical factor that protects macrophages from the apoptotic effects of oxidized lipids. AIM protein is induced in response to oxLDL loading and is highly expressed in foam cells within atherosclerotic lesions. Interestingly, both expression of AIM in lesions and its induction by oxidized lipids require the action of LXR/RXR heterodimers. AIM-/- macrophages are highly susceptible to oxLDL-induced apoptosis in vitro and undergo accelerated apoptosis in atherosclerotic lesions in vivo. Moreover, early atherosclerotic lesions in AIM-/-LDLR-/- double knockout mice are dramatically reduced when compared to AIM+/+LDLR-/- controls. We conclude that AIM production facilitates macrophage survival within atherosclerotic lesions and that loss of AIM decreases early lesion development by increasing macrophage apoptosis. PMID:16054063

  15. Prognostic Value of AIMS65 Score in Cirrhotic Patients with Upper Gastrointestinal Bleeding

    PubMed Central

    Gaduputi, Vinaya; Abdulsamad, Molham; Tariq, Hassan; Rafeeq, Ahmed; Abbas, Naeem; Kumbum, Kavitha; Chilimuri, Sridhar

    2014-01-01

    Introduction. Unlike Rockall scoring system, AIMS65 is based only on clinical and laboratory features. In this study we investigated the correlation between the AIMS65 score and Endoscopic Rockall score, in cirrhotic and noncirrhotic patients. Methods. This is a retrospective study of patients admitted with overt UGIB and undergoing esophagogastroduodenoscopy (EGD). AIMS65 and Rockall scores were calculated at the time of admission. We investigated the correlation between both scores along with stigmata of bleed seen on endoscopy. Results. A total of 1255 patients were studied. 152 patients were cirrhotic while 1103 patients were noncirrhotic. There was significant correlation between AIMS65 and Total Rockall scores in patients of both groups. There was significant correlation between AIMS65 score and Endoscopic Rockall score in noncirrhotics but not cirrhotics. AIMS65 scores in both cirrhotic and noncirrhotic groups were significantly higher in patients who died from UGIB than in patients who did not. Conclusion. We observed statistically significant correlation between AIMS65 score and length of hospitalization and mortality in noncirrhotic patients. We found that AIMS65 score paralleled the endoscopic grading of lesion causing UGIB in noncirrhotics. AIMS65 score correlated only with mortality but not the length of hospitalization or endoscopic stigmata of bleed in cirrhotics. PMID:25587269

  16. Design of orienting and aiming instrument based on fiber optic gyroscope

    NASA Astrophysics Data System (ADS)

    Zhang, Zhijun; Wang, Limin; Sun, Jiyu

    2007-12-01

    In order to improve the ground viability of missile weapon system, a quick orienting and aiming instrument is cried for the missile launching in modern war. The fiber optic gyroscope (FOG) based on Sagnac effect is a new type of all solid state rotation rate sensor that detects angular changes or angular rates relative to inertial space, which has many fine characteristics compared with traditional mechanical electronic gyro, such as low cost, light weight, long life, high reliability, wide dynamic range, etc. For the need of missile photoelectric aiming facility, It is necessary to design and manufacture a set of orienting and aiming instrument based on single axis FOG, to solve the close quarters aiming of missile launching, to measure the azimuth reference. Based on practical project, the principle of FOG orienting system and laser collimation theodolite aiming system is discussed and studied in this paper. Orienting and aiming system are constructed in the same basement. The influence of platform tilt on the precision of orientation is analyzed. An accelerator is used to compensate deviation caused by base tilt. The aiming precision affected by eccentricity of the encoders for laser collimation theodolite and the FOG orientation system are analyzed. The test results show that the aiming accuracy is 6' in three minutes. It is suitable for missile aiming in short range.

  17. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  18. Deciphering the roles of multiple additives in organocatalyzed Michael additions.

    PubMed

    Günler, Z Inci; Companyó, Xavier; Alfonso, Ignacio; Burés, Jordi; Jimeno, Ciril; Pericàs, Miquel A

    2016-05-21

    The synergistic effects of multiple additives (water and acetic acid) on the asymmetric Michael addition of acetone to nitrostyrene catalyzed by primary amine-thioureas (PAT) were precisely determined. Acetic acid facilitates hydrolysis of the imine intermediates, thus leading to catalytic behavior, and minimizes the formation of the double addition side product. In contrast, water slows down the reaction but minimizes catalyst deactivation, eventually leading to higher final yields. PMID:27128165

  19. Identifying effective behavioural models and behaviour change strategies underpinning preschool- and school-based obesity prevention interventions aimed at 4-6-year-olds: a systematic review.

    PubMed

    Nixon, C A; Moore, H J; Douthwaite, W; Gibson, E L; Vogele, C; Kreichauf, S; Wildgruber, A; Manios, Y; Summerbell, C D

    2012-03-01

    The aim of this comprehensive systematic review was to identify the most effective behavioural models and behaviour change strategies, underpinning preschool- and school-based interventions aimed at preventing obesity in 4-6-year-olds. Searching was conducted from April 1995 to April 2010 using MEDLINE, EMBASE, CINAHL, PsycINFO and The Cochrane Library. Epidemiological studies relevant to the research question with controlled assignment of participants were included in the review, if they had follow-up periods of 6 months or longer. Outcomes included markers of weight gain; markers of body composition; physical activity behaviour changes and dietary behaviour changes. Twelve studies were included in the review. The most commonly used model was social cognitive theory (SCT)/social learning theory (SLT) either as a single model or in combination with other behavioural models. Studies that used SCT/SLT in the development of the intervention had significant favourable changes in one, or more, outcome measures. In addition, interventions that (i) combined high levels of parental involvement and interactive school-based learning; (ii) targeted physical activity and dietary change; and (iii) included long-term follow-up, appeared most effective. It is suggested that interventions should also be focused on developing children's (and parents') perceived competence at making dietary and physical changes. PMID:22309069

  20. Exploring the Person-Centeredness of an Innovative E-Supportive System Aimed at Person-Centered Care: Prototype Evaluation of the Care Expert.

    PubMed

    Ventura, Filipa; Koinberg, Ingalill; Sawatzky, Richard; Karlsson, Per; Öhlén, Joakim

    2016-05-01

    Integrated in a multiphase development project, the Care Expert is a prototype of a novel e-supportive system aiming to mediate person-centered care in the context of outpatient oncology. At this early stage of development, the current study was conducted aiming at exploring the person-centeredness concept underlying the Care Expert version 1.0 and its usability for patients receiving outpatient chemotherapy for breast cancer. Within a user-centered design, we followed a mixed-methods approach entailing subjective assessment and diagnostic evaluation of the prototype. Four women undergoing outpatient chemotherapy participated in individual sessions and rated highly the system's usability. Their accounts led to identifying three supportive functions: continuous communication, reinforcement of self-driven agency, and cooperative agency with a sense of being looked after. We discuss the results in relation to theoretical fields that might guide further the development of the supportive system and usability recommendations. Care Expert has the potential to mediate person-centered care in outpatient oncology. Nevertheless, additional cycles of iterative development with the software team and of participatory design focusing on oncology nurses' perspectives are required before departing to the feasibility phase in intervention research. PMID:26909537

  1. Amyloid fibrillogenesis of lysozyme is suppressed by a food additive brilliant blue FCF.

    PubMed

    Chen, Yu-Han; Tseng, Chia-Ping; How, Su-Chun; Lo, Chun-Hsien; Chou, Wei-Lung; Wang, Steven S-S

    2016-06-01

    At least 30 different human proteins can fold abnormally to form the amyloid deposits that are associated with a number of degenerative diseases. The research presented here aimed at understanding the inhibitory potency of a food additive, brilliant blue FCF (BBF), on the amyloid fibril formation of lysozyme. Our results demonstrated that BBF was able to suppress the formation of lysozyme fibrils in a dose-dependent fashion. In addition, the structural features and conformational changes in the lysozyme samples upon the addition of BBF were further characterized using circular dichroism spectroscopy, nile red fluorescence spectroscopy, turbidity assay, and sodium dodecyl sulfate electrophoresis. Through molecular docking and molecular dynamics simulations, BBF's mechanism of action in lysozyme fibrillogenesis inhibition was found to be initiated by binding with the aggregation-prone region of the lysozyme. We believe the results from this research may contribute to the development of effective therapeutics for amyloidoses. PMID:26970823

  2. Aim-less translation: loss of Saccharomyces cerevisiae mitochondrial translation initiation factor mIF3/Aim23 leads to unbalanced protein synthesis

    PubMed Central

    Kuzmenko, Anton; Derbikova, Ksenia; Salvatori, Roger; Tankov, Stoyan; Atkinson, Gemma C.; Tenson, Tanel; Ott, Martin; Kamenski, Piotr; Hauryliuk, Vasili

    2016-01-01

    The mitochondrial genome almost exclusively encodes a handful of transmembrane constituents of the oxidative phosphorylation (OXPHOS) system. Coordinated expression of these genes ensures the correct stoichiometry of the system’s components. Translation initiation in mitochondria is assisted by two general initiation factors mIF2 and mIF3, orthologues of which in bacteria are indispensible for protein synthesis and viability. mIF3 was thought to be absent in Saccharomyces cerevisiae until we recently identified mitochondrial protein Aim23 as the missing orthologue. Here we show that, surprisingly, loss of mIF3/Aim23 in S. cerevisiae does not indiscriminately abrogate mitochondrial translation but rather causes an imbalance in protein production: the rate of synthesis of the Atp9 subunit of F1F0 ATP synthase (complex V) is increased, while expression of Cox1, Cox2 and Cox3 subunits of cytochrome c oxidase (complex IV) is repressed. Our results provide one more example of deviation of mitochondrial translation from its bacterial origins. PMID:26728900

  3. An Aims-Based Curriculum Illustrated by the Teaching of Science in Schools

    ERIC Educational Resources Information Center

    Reiss, Michael J.; White, John

    2014-01-01

    We begin by arguing that curriculum development should start with aims rather than, as is typically the case, with subjects. We, therefore, ask what might be the fundamental aims of school education. We conclude that they are twofold, namely, to enable each learner to lead a life that is personally flourishing and to help others to do so too.…

  4. Interaction of AIM with insulin-like growth factor-binding protein-4.

    PubMed

    You, Qiang; Wu, Yan; Yao, Nannan; Shen, Guannan; Zhang, Ying; Xu, Liangguo; Li, Guiying; Ju, Cynthia

    2015-09-01

    Apoptosis inhibitor of macrophages (AIM/cluster of differentiation 5 antigen-like/soluble protein α) has been shown to inhibit cellular apoptosis; however, the underlying molecular mechanism has not been elucidated. Using yeast two‑hybrid screening, the present study uncovered that AIM binds to insulin‑like growth factor binding protein‑4 (IGFBP‑4). AIM interaction with IGFBP‑4, as well as IGFBP‑2 and ‑3, but not with IGFBP‑1, ‑5 and ‑6, was further confirmed by co‑immunoprecipitation (co‑IP) using 293 cells. The binding activity and affinity between AIM and IGFBP‑4 in vitro were analyzed by co‑IP and biolayer interferometry. Serum depletion‑induced cellular apoptosis was attenuated by insulin‑like growth factor‑I (IGF‑I), and this effect was abrogated by IGFBP‑4. Of note, in the presence of AIM, the inhibitory effect of IGFBP‑4 on the anti‑apoptosis function of IGF‑I was attenuated, possibly through binding of AIM with IGFBP‑4. In conclusion, to the best of our knowledge, the present study provides the first evidence that AIM binds to IGFBP‑2, ‑3 and ‑4. The data suggest that this interaction may contribute to the mechanism of AIM-mediated anti-apoptosis function. PMID:26135353

  5. The Autism Impact Measure (AIM): Initial Development of a New Tool for Treatment Outcome Measurement

    ERIC Educational Resources Information Center

    Kanne, Stephen M.; Mazurek, Micah O.; Sikora, Darryn; Bellando, Jayne; Branum-Martin, Lee; Handen, Benjamin; Katz, Terry; Freedman, Brian; Powell, Mary Paige; Warren, Zachary

    2014-01-01

    The current study describes the development and psychometric properties of a new measure targeting sensitivity to change of core autism spectrum disorder (ASD) symptoms, the Autism Impact Measure (AIM). The AIM uses a 2-week recall period with items rated on two corresponding 5-point scales (frequency and impact). Psychometric properties were…

  6. AHSME, AIME, USAMO: The Examinations of the Committee on High School Contests.

    ERIC Educational Resources Information Center

    Maurer, Stephen B.; Mientka, Walter E.

    1982-01-01

    Details are provided about the American High School Mathematics Examination (AHSME), the American Invitational Mathematics Examination (AIME), and the USA Mathematical Olympiad (USAMO). The AIME will first be offered in 1983 as an intermediate examination between the AHSME and the USAMO. An appendix provides several sample problems. (MP)

  7. AIMS D2DB simulation for DUV and EUV mask inspection

    NASA Astrophysics Data System (ADS)

    Peng, Danping; Li, Ying; Satake, Masaki; Hu, Peter; Chen, Jerry; Hsu, S. C.; Lai, Rick; Lin, C. S.; Tuo, Laurent C. C.

    2012-02-01

    AIMS™ Die-to-Die (D2D) is widely used in checking the wafer printability of mask defects for DUV lithography. Two AIMS images, a reference and a defect image, are captured and compared with differences larger than certain tolerances identified as real defects. Since two AIMS images are needed, and since AIMS system time is precious, it is desirable to save image search and capture time by simulating reference images from the OPC mask pattern and AIMS optics. This approach is called Die-to-Database (D2DB). Another reason that D2DB is desirable is in single die mask, where the reference image from another die does not exist. This paper presents our approach to simulate AIMS optics and mask 3D effects. Unlike OPC model, whose major concern is predicting printed CD, AIMS D2DB model must produce simulated images that match measured images across the image field. This requires a careful modeling of all effects that impact the final image quality. We present a vector-diffraction theory that is based on solid theoretical foundations and a general formulation of mask model that are applicable to both rigorous Maxwell solver and empirical model that can capture the mask 3D-effects. We demonstrated the validity of our approach by comparing our simulated image with AIMS machine measured images. We also briefly discuss the necessary changes needed to model EUV optics. Simulation is particularly useful while the industry waits for an actinic EUV-AIMS tool.

  8. The Core of Religious Education: Finnish Student Teachers' Pedagogical Aims

    ERIC Educational Resources Information Center

    Kuusisto, Elina; Tirri, Kirsi

    2014-01-01

    This article investigated the core of religious education (RE) by examining Finnish student teachers' pedagogical aims in the context of Lutheran RE. The data consisted of essays (N=82) analysed in a deductive manner using the main concepts of the didactic triangle together with the aims of the Finnish National Core Curriculum. The student…

  9. Primarily Physics, Investigations in Sound, Light and Heat for K-3. Project AIMS.

    ERIC Educational Resources Information Center

    Hoover, Evalyn; Mercier, Sheryl

    Project AIMS (Activities to Integrate Mathematics and Science) has as its purpose the integration of subject matter in grades K-9. Field testing of the curriculum materials produced by AIMS indicates that this interpretation produces the following beneficial results: (1) mathematics becomes more meaningful, hence more useful; (2) science is…

  10. Evaluation of certain food additives and contaminants.

    PubMed

    2011-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The Committee also evaluated the risk posed by two food contaminants, with the aim of deriving tolerable intakes where appropriate and advising on risk management options for the purpose of public health protection. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives and contaminants. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for certain food additives (aluminium-containing food additives, Benzoe Tonkinensis, glycerol ester of gum rosin, glycerol ester of tall oil rosin, glycerol ester of wood rosin, octenyl succinic acid modified gum arabic, polydimethyl siloxane, Ponceau 4R, pullulan, pullulanase from Bacillus deromificans expressed in Bacillus licheniformis, Quinoline Yellow and Sunset Yellow FCF) and two food contaminants (cyanogenic glycosides and fumonisins). Specifications for the following food additives were revised: aluminium lakes of colouring matters; beta-apo-8'-carotenal; beta-apo-8'-carotenoic acid ethyl ester; beta-carotene, synthetic; hydroxypropyl methyl cellulose; magnesium silicate, synthetic; modified starches; nitrous oxide; sodium carboxymethyl cellulose; and sucrose monoesters of lauric, palmitic or stearic acid. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminants considered. PMID:22519244

  11. Human scavenger protein AIM increases foam cell formation and CD36-mediated oxLDL uptake.

    PubMed

    Amézaga, Núria; Sanjurjo, Lucía; Julve, Josep; Aran, Gemma; Pérez-Cabezas, Begoña; Bastos-Amador, Patricia; Armengol, Carolina; Vilella, Ramon; Escolà-Gil, Joan Carles; Blanco-Vaca, Francisco; Borràs, Francesc E; Valledor, Annabel F; Sarrias, Maria-Rosa

    2014-03-01

    AIM is expressed by macrophages in response to agonists of the nuclear receptors LXR/RXR. In mice, it acts as an atherogenic factor by protecting macrophages from the apoptotic effects of oxidized lipids. In humans, it is detected in atherosclerotic lesions, but no role related to atherosclerosis has been reported. This study aimed to investigate whether the role of hAIM extends beyond inhibiting oxidized lipid-induced apoptosis. To accomplish this goal, functional analysis with human monocytic THP1 cells and macrophages differentiated from peripheral blood monocytes were performed. It was found that hAIM reduced oxLDL-induced macrophage apoptosis and increased macrophage adhesion to endothelial ICAM-1 by enhancing LFA-1 expression. Furthermore, hAIM increased foam cell formation, as shown by Oil Red O and Nile Red staining, as well as quantification of cholesterol content. This was not a result of decreased reverse cholesterol transport, as hAIM did not affect the efflux significantly from [(3)H] Cholesterol-laden macrophages driven by plasma, apoA-I, or HDL2 acceptors. Rather, flow cytometry studies indicated that hAIM increased macrophage endocytosis of fluorescent oxLDL, which correlated with an increase in the expression of the oxLDLR CD36. Moreover, hAIM bound to oxLDL in ELISA and enhanced the capacity of HEK-293 cells expressing CD36 to endocytose oxLDL, as studied using immunofluorescence microscopy, suggesting that hAIM serves to facilitate CD36-mediated uptake of oxLDL. Our data represent the first evidence that hAIM is involved in macrophage survival, adhesion, and foam cell formation and suggest a significant contribution to atherosclerosis-related mechanisms in the macrophage. PMID:24295828

  12. The National Cancer Informatics Program (NCIP) Annotation and Image Markup (AIM) Foundation model.

    PubMed

    Mongkolwat, Pattanasak; Kleper, Vladimir; Talbot, Skip; Rubin, Daniel

    2014-12-01

    Knowledge contained within in vivo imaging annotated by human experts or computer programs is typically stored as unstructured text and separated from other associated information. The National Cancer Informatics Program (NCIP) Annotation and Image Markup (AIM) Foundation information model is an evolution of the National Institute of Health's (NIH) National Cancer Institute's (NCI) Cancer Bioinformatics Grid (caBIG®) AIM model. The model applies to various image types created by various techniques and disciplines. It has evolved in response to the feedback and changing demands from the imaging community at NCI. The foundation model serves as a base for other imaging disciplines that want to extend the type of information the model collects. The model captures physical entities and their characteristics, imaging observation entities and their characteristics, markups (two- and three-dimensional), AIM statements, calculations, image source, inferences, annotation role, task context or workflow, audit trail, AIM creator details, equipment used to create AIM instances, subject demographics, and adjudication observations. An AIM instance can be stored as a Digital Imaging and Communications in Medicine (DICOM) structured reporting (SR) object or Extensible Markup Language (XML) document for further processing and analysis. An AIM instance consists of one or more annotations and associated markups of a single finding along with other ancillary information in the AIM model. An annotation describes information about the meaning of pixel data in an image. A markup is a graphical drawing placed on the image that depicts a region of interest. This paper describes fundamental AIM concepts and how to use and extend AIM for various imaging disciplines. PMID:24934452

  13. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  14. Education and Conflict: Research and Research Possibilities

    ERIC Educational Resources Information Center

    Tomlinson, Kathryn; Benefield, Pauline

    2005-01-01

    This project aimed to undertake a scoping study of existent and potential research into the relationship between education and conflict, peace building and post-conflict situations, both nationally and internationally. Within this aim, the project investigates the main research dimensions of this area, identifies gaps in the research literature,…

  15. Importance of the systematic effort which aimed at educating of civic environmental and scientific literacy

    NASA Astrophysics Data System (ADS)

    Fukumoto, K.; Matsumoto, I.

    2012-12-01

    It is fresh in memory that there were a big earthquake and a tidal wave in Tohoku District, Japan in 11th March 2011. Importance of the environmental education and disaster prevention education in a citizen Levels is increasingly larger after it. An author's one-person Fukumoto has been concerned with coverage and an editing of an environmental public relations magazine "Eco Town MATSUE" of matsue city for two years from a University student's position. Then, We arranged various information and data by our coverage and the reaction from citizen. By this research, we report the importance of the environmental education and science reteracy which were seen from the citizen Levels based on it. It seems that citizens have had big concern in disaster prevention and an energy problem since a big earthquake in 11th March 2011. Before a big earthquake, It is contrastive with the space of a magazine having had many the education and measures towards reduction of carbon dioxide. However, a common important thing occurs. It is a feeling of the citizen of building the National which also keeps the Environment of this earth in the future and where a Nature and a human being live together as a citizen. Therefore, the environment information based on the "right science" needs to be provided for "the environment information magazine" of a citizen Levels. In addition, it is important also because of promotion of the activity of a citizen with a systematic report of citizen's opinion, discussion, and activity to various Earth's and Local Environments. That is, by sending the above factor by a civic environment information magazine, civic environmental education and training of scientific literacy are promoted.

  16. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  17. A Probabilistic Risk Analysis (PRA) of Human Space Missions for the Advanced Integration Matrix (AIM)

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.; Dillon-Merrill, Robin L.; Thomas, Gretchen A.

    2003-01-01

    The Advanced Integration Matrix (AIM) Project u7ill study and solve systems-level integration issues for exploration missions beyond Low Earth Orbit (LEO), through the design and development of a ground-based facility for developing revolutionary integrated systems for joint human-robotic missions. This paper describes a Probabilistic Risk Analysis (PRA) of human space missions that was developed to help define the direction and priorities for AIM. Risk analysis is required for all major NASA programs and has been used for shuttle, station, and Mars lander programs. It is a prescribed part of early planning and is necessary during concept definition, even before mission scenarios and system designs exist. PRA cm begin when little failure data are available, and be continually updated and refined as detail becomes available. PRA provides a basis for examining tradeoffs among safety, reliability, performance, and cost. The objective of AIM's PRA is to indicate how risk can be managed and future human space missions enabled by the AIM Project. Many critical events can cause injuries and fatalities to the crew without causing loss of vehicle or mission. Some critical systems are beyond AIM's scope, such as propulsion and guidance. Many failure-causing events can be mitigated by conducting operational tests in AIM, such as testing equipment and evaluating operational procedures, especially in the areas of communications and computers, autonomous operations, life support, thermal design, EVA and rover activities, physiological factors including habitation, medical equipment, and food, and multifunctional tools and repairable systems. AIM is well suited to test and demonstrate the habitat, life support, crew operations, and human interface. Because these account for significant crew, systems performance, and science risks, AIM will help reduce mission risk, and missions beyond LEO are far enough in the future that AIM can have significant impact.

  18. Assessing the quality of rainfall data when aiming to achieve flood resilience

    NASA Astrophysics Data System (ADS)

    Hoang, C. T.; Tchiguirinskaia, I.; Schertzer, D.; Lovejoy, S.

    2012-04-01

    A new EU Floods Directive entered into force five years ago. This Directive requires Member States to coordinate adequate measures to reduce flood risk. European flood management systems require reliable rainfall statistics, e.g. the Intensity-duration-Frequency curves for shorter and shorter durations and for a larger and larger range of return periods. Preliminary studies showed that the number of floods was lower when using low time resolution data of high intensity rainfall events, compared to estimates obtained with the help of higher time resolution data. These facts suggest that a particular attention should be paid to the rainfall data quality in order to adequately investigate flood risk aiming to achieve flood resilience. The potential consequences of changes in measuring and recording techniques have been somewhat discussed in the literature with respect to a possible introduction of artificial inhomogeneities in time series. In this paper, we discuss how to detect another artificiality: most of the rainfall time series have a lower recording frequency than that is assumed, furthermore the effective high-frequency limit often depends on the recording year due to algorithm changes. This question is particularly important for operational hydrology, because an error on the effective recording high frequency introduces biases in the corresponding statistics. In this direction, we developed a first version of a SERQUAL procedure to automatically detect the effective time resolution of highly mixed data. Being applied to the 166 rainfall time series in France, the SERQUAL procedure has detected that most of them have an effective hourly resolution, rather than a 5 minutes resolution. Furthermore, series having an overall 5 minute resolution do not have it for all years. These results raise serious concerns on how to benchmark stochastic rainfall models at a sub-hourly resolution, which are particularly desirable for operational hydrology. Therefore, database

  19. From Triple to Quadruple Aim: Care of the Patient Requires Care of the Provider

    PubMed Central

    Bodenheimer, Thomas; Sinsky, Christine

    2014-01-01

    The Triple Aim—enhancing patient experience, improving population health, and reducing costs—is widely accepted as a compass to optimize health system performance. Yet physicians and other members of the health care workforce report widespread burnout and dissatisfaction. Burnout is associated with lower patient satisfaction, reduced health outcomes, and it may increase costs. Burnout thus imperils the Triple Aim. This article recommends that the Triple Aim be expanded to a Quadruple Aim, adding the goal of improving the work life of health care providers, including clinicians and staff. PMID:25384822

  20. GIS and remote sensing techniques integration aimed for the evaluation of the Esino catchment impact on coastal water quality

    NASA Astrophysics Data System (ADS)

    Brunori, Carlo A.; Oliveri, Stefano; Luzi, Lucia; Zilioli, Eugenio

    1998-10-01

    The main aim of this work, carried out in the framework of the PRISMA2 national research program (Research and Experimentation Program for the Adriatic Sea) was the definition of an appropriate working methodology which allowed to estimate the impact of the Esino drainage-basin (central Italy), and of the anthropic activities lying on it, on the coastal water quality of the Adriatic sea. This aim was pursued by integrating techniques and instruments of analyses, such as GIS and remote sensing, which are often and often employed in natural resources managing and planning. They allowed to generate a database easily updating, relative to a very large area which is strongly differentiated in its natural and anthropic features. The database contains raw data, provided by local public organizations managing the territory, information derived from elaboration of the previous data and remote sensed frames (acquired by the hyperspectral sensor MIVIS) purposely acquired to the aim of the study. It was after all generated an 'open' system, continually updating with environmental information before long available; moreover, were explored the potentialities of the MIVIS sensor (102 band, from the visible to the thermic IR) in the study of marine coastal water quality.

  1. Labs take aim at rapid-fire lasers for fusion power

    SciTech Connect

    Weiss, P.

    1997-03-14

    By early in the next century, researchers anticipate igniting a miniature fusion reaction by blasting a hydrogen pellet with a battery of lasers. However, the massive lasers available now can`t fire at the rapid pace needed for an inertial-confinement fusion power plant. Researchers at Lawrence Livermore National Laboratory and the Naval Research Laboratory are now preparing to build lasers capable of both high power and machine gun-fast impulses. This article describes both research programs and their approaches.

  2. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  3. 75 FR 27313 - Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED PROCUREMENT LIST Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the... or Severely Disabled, Jefferson Plaza 2, Suite 10800, 1421 Jefferson Davis Highway,...

  4. The National United States Center Data Repository: Core essential interprofessional practice & education data enabling triple aim analytics.

    PubMed

    Pechacek, Judith; Shanedling, Janet; Lutfiyya, May Nawal; Brandt, Barbara F; Cerra, Frank B; Delaney, Connie White

    2015-01-01

    Understanding the impact that interprofessional education and collaborative practice (IPECP) might have on triple aim patient outcomes is of high interest to health care providers, educators, administrators, and policy makers. Before the work undertaken by the National Center for Interprofessional Practice and Education at the University of Minnesota, no standard mechanism to acquire and report outcome data related to interprofessional education and collaborative practice and its effect on triple aim outcomes existed. This article describes the development and adoption of the National Center Data Repository (NCDR) designed to capture data related to IPECP processes and outcomes to support analyses of the relationship of IPECP on the Triple Aim. The data collection methods, web-based survey design and implementation process are discussed. The implications of this informatics work to the field of IPECP and health care quality and safety include creating standardized capacity to describe interprofessional practice and measure outcomes connecting interprofessional education and collaborative practice to the triple aim within and across sites/settings, leveraging an accessible data collection process using user friendly web-based survey design to support large data scholarship and instrument testing, and establishing standardized data elements and variables that can potentially lead to enhancements to national/international information system and academic accreditation standards to further team-based, interprofessional, collaborative research in the field. PMID:26652631

  5. The National United States Center Data Repository: Core essential interprofessional practice & education data enabling triple aim analytics

    PubMed Central

    Pechacek, Judith; Shanedling, Janet; Lutfiyya, May Nawal; Brandt, Barbara F.; Cerra, Frank B.; Delaney, Connie White

    2015-01-01

    Abstract Understanding the impact that interprofessional education and collaborative practice (IPECP) might have on triple aim patient outcomes is of high interest to health care providers, educators, administrators, and policy makers. Before the work undertaken by the National Center for Interprofessional Practice and Education at the University of Minnesota, no standard mechanism to acquire and report outcome data related to interprofessional education and collaborative practice and its effect on triple aim outcomes existed. This article describes the development and adoption of the National Center Data Repository (NCDR) designed to capture data related to IPECP processes and outcomes to support analyses of the relationship of IPECP on the Triple Aim. The data collection methods, web-based survey design and implementation process are discussed. The implications of this informatics work to the field of IPECP and health care quality and safety include creating standardized capacity to describe interprofessional practice and measure outcomes connecting interprofessional education and collaborative practice to the triple aim within and across sites/settings, leveraging an accessible data collection process using user friendly web-based survey design to support large data scholarship and instrument testing, and establishing standardized data elements and variables that can potentially lead to enhancements to national/international information system and academic accreditation standards to further team-based, interprofessional, collaborative research in the field. PMID:26652631

  6. Aims and Results of the 23rd International Conference on Vacuum Technique and Technology (VTT2016)

    NASA Astrophysics Data System (ADS)

    Lisenkov, A. A.; Kostrin, D. K.; Pavlova, V. A.

    2016-07-01

    In this preface the main features, aims and results of the 23rd International Conference on Vacuum Technique and Technology (VTT2016) that was held on 7-9 June 2016 in Saint Petersburg, Russia are discussed.

  7. Asteroid Impact Mission (aim) & Deflection Assessment: AN Opportunity to Understand Impact Dynamics and Modelling

    NASA Astrophysics Data System (ADS)

    Galvez, A.; Carnelli, I.; Fontaine, M.; Corral Van Damme, C.

    2012-09-01

    ESA's Future Preparation and Strategic Studies Office has carried out the Asteroid Impact Mission (AIM) study with the objective of defining an affordable and fully independent mission element that ESA could contribute to an Asteroid Impact Deflection Assessment campaign (AIDA), a joint effort of ESA, JHU/APL, NASA, OCA and DLR. The mission design foresees two independent spacecraft, one impactor (DART) and one rendezvous probe (AIM). The target of this mission is the binary asteroid system (65803) Didymos (1996 GT): one spacecraft, DART, would impact the secondary of the Didymos binary system while AIM would observe and measure any the change in the relative orbit. For this joint project, the timing of the experiment is set (maximum proximity of the target to Earth allowing for ground-based characterisation of the experiment) but the spacecraft are still able to pursue their missions fully independently. This paper describes in particular the AIM rendezvous mission concept.

  8. Apoptosis inhibitor of macrophage (AIM) diminishes lipid droplet-coating proteins leading to lipolysis in adipocytes

    SciTech Connect

    Iwamura, Yoshihiro; Mori, Mayumi; Nakashima, Katsuhiko; Mikami, Toshiyuki; Murayama, Katsuhisa; Arai, Satoko; Miyazaki, Toru

    2012-06-08

    Highlights: Black-Right-Pointing-Pointer AIM induces lipolysis in a distinct manner from that of hormone-dependent lipolysis. Black-Right-Pointing-Pointer AIM ablates activity of peroxisome proliferator-activated receptor in adipocytes. Black-Right-Pointing-Pointer AIM reduces mRNA levels of lipid-droplet coating proteins leading to lipolysis. -- Abstract: Under fasting conditions, triacylglycerol in adipose tissue undergoes lipolysis to supply fatty acids as energy substrates. Such lipolysis is regulated by hormones, which activate lipases via stimulation of specific signalling cascades. We previously showed that macrophage-derived soluble protein, AIM induces obesity-associated lipolysis, triggering chronic inflammation in fat tissue which causes insulin resistance. However, the mechanism of how AIM mediates lipolysis remains unknown. Here we show that AIM induces lipolysis in a manner distinct from that of hormone-dependent lipolysis, without activation or augmentation of lipases. In vivo and in vitro, AIM did not enhance phosphorylation of hormone-sensitive lipase (HSL) in adipocytes, a hallmark of hormone-dependent lipolysis activation. Similarly, adipose tissue from obese AIM-deficient and wild-type mice showed comparable HSL phosphorylation. Consistent with the suppressive effect of AIM on fatty acid synthase activity, the amount of saturated and unsaturated fatty acids was reduced in adipocytes treated with AIM. This response ablated transcriptional activity of peroxisome proliferator-activated receptor (PPAR{gamma}), leading to diminished gene expression of lipid-droplet coating proteins including fat-specific protein 27 (FSP27) and Perilipin, which are indispensable for triacylglycerol storage in adipocytes. Accordingly, the lipolytic effect of AIM was overcome by a PPAR{gamma}-agonist or forced expression of FSP27, while it was synergized by a PPAR{gamma}-antagonist. Overall, distinct modes of lipolysis appear to take place in different physiological

  9. Presence of Motor-Intentional Aiming Deficit Predicts Functional Improvement of Spatial Neglect with Prism Adaptation

    PubMed Central

    Goedert, Kelly M.; Chen, Peii; Boston, Raymond C.; Foundas, Anne L.; Barrett, A. M.

    2013-01-01

    Spatial neglect is a debilitating disorder for which there is no agreed upon course of rehabilitation. The lack of consensus on treatment may result from systematic differences in the syndromes’ characteristics, with spatial cognitive deficits potentially affecting perceptual-attentional Where or motor-intentional Aiming spatial processing. Heterogeneity of response to treatment might be explained by different treatment impact on these dissociated deficits: prism adaptation, for example, might reduce Aiming deficits without affecting Where spatial deficits. Here, we tested the hypothesis that classifying patients by their profile of Where-vs-Aiming spatial deficit would predict response to prism adaptation, and specifically that patients with Aiming bias would have better recovery than those with isolated Where bias. We classified the spatial errors of 24 sub-acute right-stroke survivors with left spatial neglect as: 1) isolated Where bias, 2) isolated Aiming bias or 3) both. Participants then completed two weeks of prism adaptation treatment. They also completed the Behavioral Inattention Test (BIT) and Catherine Bergego Scale (CBS) tests of neglect recovery weekly for six weeks. As hypothesized, participants with only Aiming deficits improved on the CBS, whereas, those with only Where deficits did not improve. Participants with both deficits demonstrated intermediate improvement. These results support behavioral classification of spatial neglect patients as a potential valuable tool for assigning targeted, effective early rehabilitation. PMID:24376064

  10. AIM 2 inflammasomes regulate neuronal morphology and influence anxiety and memory in mice.

    PubMed

    Wu, Pei-Jung; Liu, Hsin-Yu; Huang, Tzyy-Nan; Hsueh, Yi-Ping

    2016-01-01

    Inflammasomes are the protein assemblies that consist of inflammasome sensors, adaptor apoptosis-associated speck-like proteins containing a CARD (ASC) and inflammasome caspase. Inflammasomes sense multiple danger signals via various inflammasome sensors and consequently use caspase to trigger proteolytic processing and secretion of IL-1β cytokines. Recent studies have suggested that neurons use their own innate immune system to detect danger signals and regulate neuronal morphology. Here, we investigate whether inflammasomes, the critical components of innate immunity, participate in regulation of neuronal morphology and function. Among various sensors, Absent in melanoma 2 (Aim2) expression in neurons is most prominent. Adding synthetic double-stranded DNA (dsDNA) to cultured neurons induces IL-1β secretion in an AIM2-dependent manner and consequently downregulates dendritic growth but enhances axon extension. The results of Aim2 knockout and knockdown show that AIM2 acts cell-autonomously to regulate neuronal morphology. Behavioral analyses further reveal that Aim2-/- mice exhibit lower locomotor activity, increased anxious behaviors and reduced auditory fear memory. In conclusion, our study suggests that AIM2 inflammasomes regulate neuronal morphology and influence mouse behaviors. PMID:27561456

  11. AIM 2 inflammasomes regulate neuronal morphology and influence anxiety and memory in mice

    PubMed Central

    Wu, Pei-Jung; Liu, Hsin-Yu; Huang, Tzyy-Nan; Hsueh, Yi-Ping

    2016-01-01

    Inflammasomes are the protein assemblies that consist of inflammasome sensors, adaptor apoptosis-associated speck-like proteins containing a CARD (ASC) and inflammasome caspase. Inflammasomes sense multiple danger signals via various inflammasome sensors and consequently use caspase to trigger proteolytic processing and secretion of IL-1β cytokines. Recent studies have suggested that neurons use their own innate immune system to detect danger signals and regulate neuronal morphology. Here, we investigate whether inflammasomes, the critical components of innate immunity, participate in regulation of neuronal morphology and function. Among various sensors, Absent in melanoma 2 (Aim2) expression in neurons is most prominent. Adding synthetic double-stranded DNA (dsDNA) to cultured neurons induces IL-1β secretion in an AIM2-dependent manner and consequently downregulates dendritic growth but enhances axon extension. The results of Aim2 knockout and knockdown show that AIM2 acts cell-autonomously to regulate neuronal morphology. Behavioral analyses further reveal that Aim2−/− mice exhibit lower locomotor activity, increased anxious behaviors and reduced auditory fear memory. In conclusion, our study suggests that AIM2 inflammasomes regulate neuronal morphology and influence mouse behaviors. PMID:27561456

  12. Additive manufacturing in production: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  13. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  14. The addition of disilanes to cumulenes

    SciTech Connect

    Chen, Y.

    1997-10-08

    The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

  15. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  16. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  17. Organizational technologies for transforming care: measures and strategies for pursuit of IOM quality aims.

    PubMed

    Gamm, Larry; Kash, Bita; Bolin, Jane

    2007-01-01

    Progress on the Institute of Medicine's (IOM's) 6 aims to bridge the "quality chasm" requires both measurement and the concerting of multiple organizational technologies. The basic thesis of this article is that rapid progress on the IOM's multiple aims calls for transformative change within and among healthcare organizations. The promise of a number of types of transformative approaches is closely linked to their ability to simultaneously build upon several organizational technologies: clinical, social, information, and administrative technologies. To encourage and advance such efforts, this article identifies illustrative measures of attainment of the IOM's 6 aims or targeted areas for improvement that reflect the contributions of the 4 organizational technologies. It discusses examples of relationships between the IOM aims and the organizational technologies considered. Finally, the article offers illustrations of the interplay of these organizational technologies and IOM aims-across an array of organizational innovations with transformative potential. Included among such innovations are information technology in the form of electronic medical records, computer-based physician order entry, and patient health records; organization-wide patient-centered cultural change such as Studer's Hardwiring Excellence; Six Sigma and Toyota Production Management/LEAN; major clinical technology change, for example, minimally invasive cardiac surgery and broader treatment innovations such as disease management. PMID:17873660

  18. Additive monitoring and interactions during copper electroprocessing

    NASA Astrophysics Data System (ADS)

    Collins, Dale Wade

    The electrochemical deposition of copper has been a major focus of research for decades. Renewed interest in copper electroplating is not limited to the copper producers but is also a major concern of semiconductor manufacturers. The focus on copper electrochemistry by the semiconductor manufacturers has increased since IBM's announcement in 1997 that copper will be used for metallization in high speed/power semiconductors [1--3]. The desire to use copper instead of aluminum is simply a reflection on copper's superior conductivity (lower RC time constants) and resistance to electromigration (generally proportional to the melting point). This dissertation is the compilation of the research into analytical techniques for monitoring surface-active additives in common sulfuric acid/copper sulfate plating baths. Chronopotentiometric, DC and AC voltammetry were the major analytical techniques used in this research. Several interactions between the additives will also be presented along with their apparent decline in activity. The decline in activity is well known in the industry and is also detected by these methods as presented in chapters 4 and 5. Finally, a systemic approach for monitoring the additive Galactosal, which is commonly used in electrowinning, will be outlined. The monitoring system proposed herein would have to be adjusted for each electrowinning facility because each has a unique chemistry and cell configuration.

  19. National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry

    SciTech Connect

    David Roberts

    2012-01-01

    This technical highlight describes NREL research to develop a publicly available database of energy retrofit measures containing performance characteristics and cost estimates for nearly 3,000 measures.

  20. Additive Construction with Mobile Emplacement (ACME)

    NASA Technical Reports Server (NTRS)

    Vickers, John

    2015-01-01

    The Additive Construction with Mobile Emplacement (ACME) project is developing technology to build structures on planetary surfaces using in-situ resources. The project focuses on the construction of both 2D (landing pads, roads, and structure foundations) and 3D (habitats, garages, radiation shelters, and other structures) infrastructure needs for planetary surface missions. The ACME project seeks to raise the Technology Readiness Level (TRL) of two components needed for planetary surface habitation and exploration: 3D additive construction (e.g., contour crafting), and excavation and handling technologies (to effectively and continuously produce in-situ feedstock). Additionally, the ACME project supports the research and development of new materials for planetary surface construction, with the goal of reducing the amount of material to be launched from Earth.

  1. Additive manufacturing of materials: Opportunities and challenges

    DOE PAGESBeta

    Babu, Sudarsanam Suresh; Love, Lonnie J.; Dehoff, Ryan R.; Peter, William H.; Watkins, Thomas R.; Pannala, Sreekanth

    2015-11-01

    Additive manufacturing (also known as 3D printing) is considered a disruptive technology for producing components with topologically optimized complex geometries as well as functionalities that are not achievable by traditional methods. The realization of the full potential of 3D printing is stifled by a lack of computational design tools, generic material feedstocks, techniques for monitoring thermomechanical processes under in situ conditions, and especially methods for minimizing anisotropic static and dynamic properties brought about by microstructural heterogeneity. In this paper, we discuss the role of interdisciplinary research involving robotics and automation, process control, multiscale characterization of microstructure and properties, and high-performancemore » computational tools to address each of these challenges. In addition, emerging pathways to scale up additive manufacturing of structural materials to large sizes (>1 m) and higher productivities (5–20 kg/h) while maintaining mechanical performance and geometrical flexibility are also discussed.« less

  2. Additive manufacturing of materials: Opportunities and challenges

    SciTech Connect

    Babu, Sudarsanam Suresh; Love, Lonnie J.; Dehoff, Ryan R.; Peter, William H.; Watkins, Thomas R.; Pannala, Sreekanth

    2015-11-01

    Additive manufacturing (also known as 3D printing) is considered a disruptive technology for producing components with topologically optimized complex geometries as well as functionalities that are not achievable by traditional methods. The realization of the full potential of 3D printing is stifled by a lack of computational design tools, generic material feedstocks, techniques for monitoring thermomechanical processes under in situ conditions, and especially methods for minimizing anisotropic static and dynamic properties brought about by microstructural heterogeneity. In this paper, we discuss the role of interdisciplinary research involving robotics and automation, process control, multiscale characterization of microstructure and properties, and high-performance computational tools to address each of these challenges. In addition, emerging pathways to scale up additive manufacturing of structural materials to large sizes (>1 m) and higher productivities (5–20 kg/h) while maintaining mechanical performance and geometrical flexibility are also discussed.

  3. Attitude Towards Physics and Additional Mathematics Achievement Towards Physics Achievement

    ERIC Educational Resources Information Center

    Veloo, Arsaythamby; Nor, Rahimah; Khalid, Rozalina

    2015-01-01

    The purpose of this research is to identify the difference in students' attitude towards Physics and Additional Mathematics achievement based on gender and relationship between attitudinal variables towards Physics and Additional Mathematics achievement with achievement in Physics. This research focused on six variables, which is attitude towards…

  4. Aiming accuracy in preferred and non-preferred limbs: implications for programing models of motor control

    PubMed Central

    Sherwood, David E.

    2014-01-01

    Most models of motor programing contend that one can perform learned actions with different muscle groups or limbs demonstrating the concept of motor equivalence. The goal of this review is to determine the generality of this concept within the context of aiming movements performed by both preferred and non-preferred limbs. Theoretical approaches to motor programing are described, followed by a comparison of a variety of kinematic measures taken from preferred and non-preferred limbs from simple and more complex aiming tasks. In general, the support for motor equivalency is strong for one- and two-dimensional aiming tasks and for simultaneous bimanual movements, but mixed for unconstrained throwing tasks and tasks that require feedback-based corrections. PMID:25408677

  5. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  6. Telehealth and Occupational Therapy: Integral to the Triple Aim of Health Care Reform.

    PubMed

    Cason, Jana

    2015-01-01

    Programs and concepts included in the Patient Protection and Affordable Care Act of 2010 are expected to transform health care in the United States from a volume-based health system to a value-based health system with increased emphasis on prevention and health promotion. The Triple Aim, a framework set forth by the Institute for Healthcare Improvement, focuses on improving the health care experience, the health of populations, and the affordability of care. This article describes telehealth as an integral component in achieving the Triple Aim of health care and discusses implications for occupational therapy practitioners. PMID:26122676

  7. Triple aim program: assessing its effectiveness as a hospital management tool.

    PubMed

    Coyne, Joseph S; Hilsenrath, Peter E; Arbuckle, Barry S; Kureshy, Fareed; Vaughan, David; Grayson, David; Saygin, Tuba

    2014-01-01

    According to a recent national survey of Hospital chief executive officers, financial challenges are their top concern, especially government reimbursement. Moreover, the patient faces greater deductibles forcing hospitals to prioritize price transparency. The Triple Aim program is a tool available to hospital management to help address these challenges. This study indicates that the Triple Aim is valuable to healthcare providers and patients by reducing medical errors, improving healthcare quality, and reducing costs on a per capita basis. Managerial implications are discussed for hospitals and health systems considering this approach to addressing financial challenges. PMID:25529789

  8. Installing and Running AIM 2.3.1 in a Clustered Server Production Environment

    SciTech Connect

    Walker, J.H.

    2003-09-11

    High availability and redundancy were required for a 24/7 technical baseline at a nuclear production facility. Process engineering, operations, and maintenance all had to connect to the AIM workflow and data management system at the plant. 24-hour availability and 100 percent data integrity were requirements. AIM 2.3.1 satisfied these needs by running in a clustered environment, using shared RAID 5 data storage installed with Oracle Fail Safe on clustered WinNT 4.0 Servers. Order of installation was critical for successful operation. The system has been running in production for 12 months with minimal downtime, and zero loss of data.

  9. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  10. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting. PMID:26118220

  11. The GLAMA (Girls! Lead! Achieve! Mentor! Activate!) physical activity and peer leadership intervention pilot project: A process evaluation using the RE-AIM framework

    PubMed Central

    2012-01-01

    Background Implementing new initiatives and physical activity interventions in schools represents a myriad of challenges that if overcome can potentially facilitate a range of behavioural changes. The aim of this paper is to describe the process evaluation of specific design constructs used in the GLAMA (Girls! Lead! Achieve! Mentor! Activate!) peer leadership and physical activity pilot project. Conducted in a state secondary school in Australia, the intervention was designed to provide students with opportunities to develop leadership skills, school and social connectedness in addition to a range of physical activity experiences. Methods This process evaluation used the RE-AIM (Reach, Efficacy, Adoption, Implementation and Maintenance) health promotion evaluation framework to assess three design constructs of the intervention: the effectiveness of leadership training and leader preparedness, activity suitability and participation, and the barriers to implementation of the intervention and potential solutions to overcome these barriers. As it was not the specific aim of this pilot, no behavioural change data were collected from students. Data were collected using a mixed methods approach including student questionnaires, teachers and researchers reporting on their own observations and feedback from students. Results There were three main considerations evident across more than one RE-AIM dimension that need to be addressed to assist with future GLAMA dissemination. Firstly, the development of teacher, school and student participation. This needs to be through a variety of professional development opportunities for teachers, integration of the program within timetabled classes within the school and promoting the program to students as an opportunity to develop a range of skills to apply to future learning and workplace environments. Secondly, the successful translation of leadership training to practice is necessary to ensure that leaders are effectively able to

  12. Globalization and the Asia Pacific: An Exploration of Efficiency and Equality Aims of Education

    ERIC Educational Resources Information Center

    Engel, Laura C.; Rutkowski, David J.

    2008-01-01

    The paper aims to explore the relationship between globalization and education through an investigation of educational policy development in the specific context of the Asia Pacific. The paper's primary focus is on data collected from the World Bank, OECD, IMF and UNESCO to look primarily at three interrelated trends in education: increasing…

  13. Meat Training Council Aims to Make Willing Workers into Professional Managers

    ERIC Educational Resources Information Center

    Pollitt, David

    2002-01-01

    Details the UK Meat Training Council's management development programme, aimed at increasing the levels of professionalism in the meat and poultry industry and making it more attractive to young people as a long-term career. Describes the course contents and assessment methods, and contains interviews with course participants.

  14. A Diminished Self: Entrepreneurial and Therapeutic Ethos Operating with a Common Aim

    ERIC Educational Resources Information Center

    Brunila, Kristiina

    2012-01-01

    This article focuses on the aim of creating a flexible and self-centred self by means of entrepreneurial and therapeutic education. It is an analysis that uses documents from project-based educational programmes as well as interviews with young adults and the people who work with them in these programmes. The data are examined using a Foucauldian…

  15. A Systematic Review of Interventions Aimed at Reducing Binge Drinking among College Students

    ERIC Educational Resources Information Center

    Bridges, Ledetra S.; Sharma, Manoj

    2015-01-01

    The purpose of this article was to systematically review the interventions aimed at reducing binge drinking in college students. A total of 18 interventions published between 2010 and 2015 were evaluated in this review. Two main study designs were used by these interventions: randomized controlled trials (RCTs) and quasi-experimental designs, with…

  16. Aiming for Positive Washback: A Case Study of International Teaching Assistants

    ERIC Educational Resources Information Center

    Saif, Shahrzad

    2006-01-01

    The aim of this study is to explore the possibility of creating positive washback by focusing on factors in the background of the test development process and anticipating the conditions most likely to lead to positive wash-back. The article reports on a multiphase empirical study investigating the washback effects of a needs-based test of spoken…

  17. Deficits in Executed and Imagined Aiming Performance in Brain-Injured Children

    ERIC Educational Resources Information Center

    Caeyenberghs, K.; van Roon, D.; Swinnen, S. P.; Smits-Engelsman, B. C. M.

    2009-01-01

    Motor disorders are a frequent consequence of acquired brain injury (ABI) in children and much effort is currently invested in alleviating these deficits. The aim of the present study was to test motor imagery (MI) capabilities in children with ABI (n=25) and an age- and gender-matched control group (n=25). A computerized Virtual Radial Fitts Task…

  18. Activation of NLRP3 and AIM2 inflammasomes in Kupffer cells in hepatic ischemia/reperfusion.

    PubMed

    Kim, Hyo-Yeon; Kim, Seok-Joo; Lee, Sun-Mee

    2015-01-01

    Inflammasome activation by danger signals in ischemia/reperfusion (I/R) injury is responsible for the sterile inflammatory response. Signals triggering formation and activation of the inflammasome involve the generation of oxidative stress. The aim of this study was to examine the molecular mechanisms of inflammasome activation and the involvement of reactive oxygen species in hepatic I/R. I/R induced the formation of nucleotide-binding domain leucine-rich repeat containing family pyrin domain containing 3 (NLRP3) and absent in melanoma 2 (AIM2) inflammasomes and the subsequent serum release of interleukin 1β. Pannexin-1 inhibitor and anti-cathepsin B antibody attenuated I/R-induced inflammasome activation and hepatic injury. The expression of the thioredoxin-interacting protein gene and the interaction between NLRP3 and the thioredoxin-interacting protein increased after I/R. Treatment with the antioxidant N-acetylcysteine significantly attenuated protein conversion of interleukin 1β after hepatic I/R. Moreover, pannexin-1 protein expression and cathepsin B release were strongly attenuated by N-acetylcysteine. The depletion of Kupffer cells with gadolinium chloride markedly decreased NLRP3 and AIM2 inflammasome expression and activation of their signaling pathways, and also reduced the level of caspase-1 protein in F4/80-positive cells. Our findings suggest that reactive-oxygen-species-mediated activation of NLRP3 and AIM2 inflammasomes leads to I/R-induced inflammatory responses in which Kupffer cells play a crucial role. PMID:25327779

  19. AIM: A comprehensive Arabidopsis Interactome Module database and related interologs in plants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Systems biology analysis of protein modules is important for understanding the functional relationships between proteins in the interactome. Here, we present a comprehensive database named AIM for Arabidopsis (Arabidopsis thaliana) interactome modules. The database contains almost 250,000 modules th...

  20. A Contest to Create Media Messages Aimed at Recruiting Adolescents for Stop Smoking Programs.

    ERIC Educational Resources Information Center

    Croghan, Ivana T.; Campbell, Heather M.; Patten, Christi A.; Croghan, Gary A.; Schroeder, Darrell R.; Novotny, Paul J.

    2004-01-01

    This project engaged adolescents in a contest to create advertising messages aimed at recruiting teens for stop smoking programs. Middle school students were invited to design a media message for television, radio, Web, or print (newspaper or billboard). 0f 4,289 students in eight middle schools of Rochester, Minn., 265 (6.2%) developed 172 stop…

  1. The Role of Field Education in a University-Community Partnership Aimed at Curriculum Transformation

    ERIC Educational Resources Information Center

    Lewis, Laura A.; Kusmaul, Nancy; Elze, Diane; Butler, Lisa

    2016-01-01

    University-community partnerships can play an important role in curriculum development, but little has been written about the role of community agencies in designing curricula. This article describes the role of field education in an innovative university-community partnership aimed at transforming an MSW curriculum to integrate a trauma-informed…

  2. Theory of Knowledge Aims, Objectives and Assessment Criteria: An Analysis of Critical Thinking Descriptors

    ERIC Educational Resources Information Center

    Hughes, Conrad

    2014-01-01

    This article analyses the construct validity of the International Baccalaureate Diploma Programme's Theory of Knowledge course in the light of claims that it is a course in critical thinking. After discussion around critical thinking--what it is and why it is valuable educationally--the article analyses the extent to which the course aims,…

  3. Concerted activation of the AIM2 and NLRP3 inflammasomes orchestrates host protection against Aspergillus infection

    PubMed Central

    Karki, Rajendra; Man, Si Ming; Malireddi, R.K. Subbarao; Gurung, Prajwal; Vogel, Peter; Lamkanfi, Mohamed; Kanneganti, Thirumala-Devi

    2015-01-01

    SUMMARY Invasive pulmonary aspergillosis is a leading cause of infection-associated mortality in immunocompromised individuals. Aspergillus fumigatus infection produces ligands that could activate inflammasomes but the contribution of these host defenses remains unclear. We show that two inflammasome receptors, AIM2 and NLRP3, recognize intracellular A. fumigatus and collectively induce protective immune responses. Mice lacking both AIM2 and NLRP3 fail to confine Aspergillus hyphae to inflammatory foci, leading to widespread hyphal dissemination to lung blood vessels. These mice succumb to infection more rapidly than WT mice or mice lacking a single inflammasome receptor. AIM2 and NLRP3 activation initiates assembly of a single cytoplasmic inflammasome platform, composed of the adaptor protein ASC along with caspase-1 and caspase-8. Combined actions of caspase-1 and caspase-8 lead to processing of proinflammatory cytokines IL-1β and IL-18 that critically control the infection. Thus, AIM2 and NLRP3 form a dual cytoplasmic surveillance system that orchestrates responses against A. fumigatus infection. PMID:25704009

  4. Critical role for the AIM2 inflammasome during acute central nervous system bacterial infection

    PubMed Central

    Hanamsagar, Richa; Aldrich, Amy; Kielian, Tammy

    2014-01-01

    Interleukin-1β (IL-1β) is essential for eliciting protective immunity during the acute phase of Staphylococcus aureus (S. aureus) infection in the central nervous system (CNS). We previously demonstrated that microglial IL-1β production in response to live S. aureus is mediated through the Nod-like receptor protein 3 (NLRP3) inflammasome, including the adapter protein ASC (apoptosis-associated, speck-like, caspase-1 recruiting domain-containing protein), and pro-caspase-1. Here we utilized NLRP3, ASC, and caspase-1/11 knockout (KO) mice to demonstrate the functional significance of inflammasome activity during CNS S. aureus infection. ASC and caspase-1/11 KO animals were exquisitely sensitive, with approximately 50% of mice succumbing to infection within 24 h. Unexpectedly, the survival of NLRP3 KO mice was similar to WT animals, suggesting the involvement of an alternative upstream sensor, which was later identified as absent in melanoma 2 (AIM2) based on the similar disease patterns between AIM2 and ASC KO mice. Besides IL-1β, other key inflammatory mediators, including IL-6, CXCL1, CXCL10, and CCL2 were significantly reduced in the CNS of AIM2 and ASC KO mice, implicating autocrine/paracrine actions of IL-1β, since these mediators do not require inflammasome processing for secretion. These studies demonstrate a novel role for the AIM2 inflammasome as a critical molecular platform for regulating IL-1β release and survival during acute CNS S. aureus infection. PMID:24484406

  5. AIMS Library - A community resource for sorghum genomic studies and breeding

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The sorghum genome sequence is completed. A systematically mutagenized population linking gene function to sequence is becoming increasingly urgent. A project was initiated to develop an Annotated Individually-pedigreed Mutagenized Sorghum (AIMS) library using (EMS) ethyl methane sulfonate for sel...

  6. Students' Performance in Investigative Activity and Their Understanding of Activity Aims

    ERIC Educational Resources Information Center

    Gomes, Alessandro Damasio Trani; Borges, A. Tarciso; Justi, Rosaria

    2008-01-01

    This study investigates the relationship between the students' understanding of the aims of an investigative activity and their performance when conducting it. One hundred and eighty-one year nine students from a public middle school in Brazil took part in the study. Students working in pairs were asked to investigate two problems using a…

  7. A Formative Evaluation Plan for the Automated Instructional Management System (AIMS).

    ERIC Educational Resources Information Center

    Berkowitz, Melissa; And Others

    The plan described was developed to evaluate the training and cost-effectiveness of the Automated Instructional Management System (AIMS), a computer-based training and resource development system being developed by the Training and Doctrine Command (TRADOC) for possible installation in its schools and training centers. The Functional Description…

  8. Early Parenting Intervention Aimed at Maternal Sensitivity and Discipline: A Process Evaluation

    ERIC Educational Resources Information Center

    Stolk, Mirjam N.; Mesman, Judi; van Zeijl, Jantien; Alink, Lenneke R. A.; Bakermans-Kranenburg, Marian J.; van IJzendoorn, Marinus H.; Juffer, Femmie; Koot, Hans M.

    2008-01-01

    This study investigated the influence of the intervention process on the effectiveness of a program aimed at promoting positive parenting. The study involved a homogeneous intervention sample (N = 120) of mothers and their 1-, 2-, or 3-year-old children screened for high levels of externalizing problems. The alliance between mother and intervener,…

  9. AIM [Apperception Interception Method]: An Exemplary Program from International Experience. Final Report.

    ERIC Educational Resources Information Center

    World Education, Inc., New York, NY.

    Having used the apperception-interception method (AIM) of adult basic education (ABE) successfully abroad, World Education, with Office of Education funding and working at several American sites, developed a model of innovative ABE methods and materials for the United States, based on addressing learners' motivational problems. By using…

  10. Scientific Literacy, PISA, and Socioscientific Discourse: Assessment for Progressive Aims of Science Education

    ERIC Educational Resources Information Center

    Sadler, Troy D.; Zeidler, Dana L.

    2009-01-01

    In this article, we explore the Programme for International Student Assessment (PISA) with a lens informed by the socioscientific issues (SSI) movement. We consider the PISA definition of scientific literacy and how it is situated with respect to broader discussions of the aims of science education. We also present an overview of the SSI framework…

  11. RE-AIM Checklist for Integrating and Sustaining Tier 2 Social-Behavioral Interventions

    ERIC Educational Resources Information Center

    Cheney, Douglas A.; Yong, Minglee

    2014-01-01

    Even though evidence-based Tier 2 programs are now more commonly available, integrating and sustaining these interventions in schools remain challenging. RE-AIM, which stands for Reach, Effectiveness, Adoption, Implementation, and Maintenance, is a public health framework used to maximize the effectiveness of health promotion programs in…

  12. Evaluation of a School-Based Program Aimed at Preventing Depressive Symptoms in Adolescents

    ERIC Educational Resources Information Center

    Garmy, Pernilla; Jakobsson, Ulf; Carlsson, Katarina Steen; Berg, Agneta; Clausson, Eva K.

    2015-01-01

    The aim of this pilot study was to evaluate the implementation of a universal school-based cognitive behavioral program whose target is to prevent depressive symptoms in adolescents. The study had a quasi-experimental design with pretest, posttest, and a 1-year follow-up and provides an illustrative calculation for the implementation costs of the…

  13. Measuring Motivation Multidimensionally: Development of the Assessment of Individual Motives-Questionnaire (AIM-Q)

    ERIC Educational Resources Information Center

    Bernard, Larry C.; Mills, Michael; Swenson, Leland; Walsh, R. Patricia

    2008-01-01

    We report the development of the Assessment of Individual Motives-Questionnaire (AIM-Q), a new instrument based on an evolutionary psychology theory of human motivation. It provides multitrait-multimethod (MTMM) assessment of individual differences on 15 motive scales. A total heterogeneous sample of N = 1,251 participated in eight studies that…

  14. Circle of Strength: Tribal Colleges Aim to Recruit and Retain Native Male Students

    ERIC Educational Resources Information Center

    Pember, Mary Annette

    2011-01-01

    As tribal colleges aim to retain Native male students, they're finding that talking, drumming, construction, and spirituality may keep men in school. Lac Courte Oreilles Ojibwe Community College (LCOOCC, Hayward, Wisconsin) is just one of the tribal colleges across the country looking for innovative ways to attract and retain more men.…

  15. AIM-Monitoring: a component of the BLM assessment, inventory, and monitoring strategy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The “BLM Assessment, Inventory, and Monitoring Strategy for Integrated Renewable Resources Management” (AIM Strategy) was completed in 2011 in response to a request from the Office of Management and Budget. The strategy describes an approach for integrated, cross-program assessment, inventory, and m...

  16. Evaluation of On-Line Searching in MEDLARS (AIM-TWX) by Biomedical Practitioners.

    ERIC Educational Resources Information Center

    Lancaster, F. Wilfrid

    The purpose of the investigation was to determine how effectively biomedical practitioners, with a minimum of introduction to the system, can conduct on-line searches to satisfy their own information needs. The searches were conducted on the Abridged Index Medicus data base as implemented on the on-line ELHILL system (AIM-TWX). ELHILL is the ORBIT…

  17. Cross-cultural exchange: How students can frustrate the aims of study abroad programmes

    NASA Astrophysics Data System (ADS)

    Barnes, Leslie R.

    1982-09-01

    Readily accepting that study abroad programmes may have as many differing forms and aims as there are participating institutions, and that by no means all programmes include academic content in their goals, I would nevertheless maintain: 1. that a sociological perspective is as necessary as the hitherto predominantly psychological approach in obtaining a balanced assessment of study abroad programmes;

  18. Using the RE-AIM framework to evaluate physical activity public health programs in Mexico

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Physical activity (PA) public health programming has been widely used in Mexico; however, few studies have documented individual and organizational factors that might be used to evaluate their public health impact. The RE-AIM framework is an evaluation tool that examines individual and organizationa...

  19. Summer Program Aims to Improve Literacy Skills of Black Male Teens

    ERIC Educational Resources Information Center

    West, Cassandra

    2012-01-01

    In this article, the author talks about a summer program at the African American Adolescent Male Summer Literacy Institute which aims to improve literacy skills of black male teens. The African American Adolescent Male Summer Literacy Institute is now in its fourth year at the University of Illinois-Chicago (UIC). Alfred Tatum, director of the…

  20. Surgeons' aims and pain assessment strategies when managing paediatric post-operative pain: A qualitative study.

    PubMed

    Twycross, Alison M; Williams, Anna M; Finley, G Allen

    2015-12-01

    Children experience moderate to severe pain post-operatively. Nurses have been found to have a variety of aims in this context. Surgeons' aims when managing post-operative pain have not been explored. This qualitative study set out to explore paediatric surgeons' aims when managing post-operative pain in one paediatric hospital in Canada. Consultant surgeons (n = 8) across various specialities took part in semi-structured interviews. Surgeons' overarching aim was to keep the child comfortable. Various definitions of comfortable were given, relating to the child's experience of pain itself and their ability to undertake activities of daily living. Children's behavioural pain cues seem to be a primary consideration when making treatment decisions. Parents' views regarding their child's pain were also seen as important, suggesting children may not be seen as competent to make decisions on their own behalf. The need to maintain a realistic approach was emphasised and pain management described as a balancing act. Surgeons may draw on both tacit and explicit knowledge when assessing children's pain. There appears to be an expectation among surgeons that some pain is to be expected post-operatively and that the diagnostic value of pain may, in some cases, supersede concerns for the child's pain experience. PMID:24728398

  1. REDUCTION IN ASTHMA MORBIDITY IN CHILDREN AS A RESULT OF HOME REMEDIATION AIMED AT MOISTURE SOURCES

    EPA Science Inventory

    Objective: Home dampness, presence of mold and allergens have been associated with asthma morbidity. We examined changes in asthma morbidity in children as a result of home remediation aimed at moisture sources.

    Design: Prospective, randomized controlled trial.

    Part...

  2. R. S. Peters and J. H. Newman on the Aims of Education

    ERIC Educational Resources Information Center

    Ozolins, Janis T.

    2013-01-01

    R. S. Peters never explicitly talks about wisdom as being an aim of education. He does, however, in numerous places, emphasize that education is of the whole person and that, whatever else it might be about, it involves the development of knowledge and understanding. Being educated, he claims, is incompatible with being narrowly specialized.…

  3. Aiming for Better Employment: A Holistic Analysis from Admission to Labour Market

    ERIC Educational Resources Information Center

    Chan, Sheng-Ju; Lin, Jing-Wen

    2016-01-01

    To address the changing needs of the labour market better, higher education institutions have increasingly aimed to enhance their teaching quality and the learning experiences of their students. Therefore, a key concept of the missions of contemporary educational institutions is to improve students' employability after graduation. Although…

  4. The Moral and Ethical Aims of the School Viewed through a Cosmopolitan Prism

    ERIC Educational Resources Information Center

    Hansen, David T.

    2013-01-01

    In this chapter, the author proposes to imagine the aims of the school in light of a cosmopolitan philosophy of education. The first section that follows provides a summary account of what the author takes cosmopolitanism to mean. The second section frames a philosophy of education that stems from this account. The third and penultimate section…

  5. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  6. Additive Manufacturing in Production: A Study Case Applying Technical Requirements

    NASA Astrophysics Data System (ADS)

    Ituarte, Iñigo Flores; Coatanea, Eric; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

    Additive manufacturing (AM) is expanding the manufacturing capabilities. However, quality of AM produced parts is dependent on a number of machine, geometry and process parameters. The variability of these parameters affects the manufacturing drastically and therefore standardized processes and harmonized methodologies need to be developed to characterize the technology for end use applications and enable the technology for manufacturing. This research proposes a composite methodology integrating Taguchi Design of Experiments, multi-objective optimization and statistical process control, to optimize the manufacturing process and fulfil multiple requirements imposed to an arbitrary geometry. The proposed methodology aims to characterize AM technology depending upon manufacturing process variables as well as to perform a comparative assessment of three AM technologies (Selective Laser Sintering, Laser Stereolithography and Polyjet). Results indicate that only one machine, laser-based Stereolithography, was feasible to fulfil simultaneously macro and micro level geometrical requirements but mechanical properties were not at required level. Future research will study a single AM system at the time to characterize AM machine technical capabilities and stimulate pre-normative initiatives of the technology for end use applications.

  7. A Policy Framework for Health Systems to Promote Triple Aim Innovation.

    PubMed

    Verma, Amol; Bhatia, Sacha

    2016-01-01

    With the expiry of the Health Accords, provincial governments must face the challenge of improving performance in the context of ageing demographics, increasing multi-morbidity, and real concerns about financial stability. The Institute for Healthcare Improvement Triple Aim articulates fundamental goals that can guide health system transformation: improved population health, enhanced patient experience and reduced or stable per capita costs. Advancing fragmented and costly health systems in pursuit of these goals requires transformative, as opposed to iterative, change. Provincial governments are ideally suited to lead this change by acting as "integrators" who link healthcare organizations and align incentives across the spectrum of delivery. Although there is very limited evidence regarding the effectiveness of system-level reforms, we draw on initiatives from around the world to suggest policies that can promote system-level Triple Aim innovation. We categorize these policies within the classic functions ascribed to health systems: financing, stewardship and resource generation. As healthcare financers, governments should orient procurement policy towards the Triple Aim innovation and reform payment to reward value not volume. As health system stewards, governments should define a Triple Aim vision; measure and report outcomes, patient experience, and costs; integrate across sectors; and facilitate learning from failure and spread of successful innovation. As resource generators, governments should invest in health information technology to exploit "big data" and ensure that professional education equips front-line clinicians with skills necessary to improve systems. There are a number of barriers to system-level Triple Aim innovation. There is a lack of evidence for macro-level policy changes, innovation is costly and complicated, and system reform may not be politically appealing. Triple Aim innovation may also be conflated with organization-level quality

  8. Interventions aimed at improving the nursing work environment: a systematic review

    PubMed Central

    2010-01-01

    Background Nursing work environments (NWEs) in Canada and other Western countries have increasingly received attention following years of restructuring and reported high workloads, high absenteeism, and shortages of nursing staff. Despite numerous efforts to improve NWEs, little is known about the effectiveness of interventions to improve NWEs. The aim of this study was to review systematically the scientific literature on implemented interventions aimed at improving the NWE and their effectiveness. Methods An online search of the databases CINAHL, Medline, Scopus, ABI, Academic Search Complete, HEALTHstar, ERIC, Psychinfo, and Embase, and a manual search of Emerald and Longwoods was conducted. (Quasi-) experimental studies with pre/post measures of interventions aimed at improving the NWE, study populations of nurses, and quantitative outcome measures of the nursing work environment were required for inclusion. Each study was assessed for methodological strength using a quality assessment and validity tool for intervention studies. A taxonomy of NWE characteristics was developed that would allow us to identify on which part of the NWE an intervention targeted for improvement, after which the effects of the interventions were examined. Results Over 9,000 titles and abstracts were screened. Eleven controlled intervention studies met the inclusion criteria, of which eight used a quasi-experimental design and three an experimental design. In total, nine different interventions were reported in the included studies. The most effective interventions at improving the NWE were: primary nursing (two studies), the educational toolbox (one study), the individualized care and clinical supervision (one study), and the violence prevention intervention (one study). Conclusions Little is known about the effectiveness of interventions aimed at improving the NWE, and published studies on this topic show weaknesses in their design. To advance the field, we recommend that

  9. A New Coupled Earth's Critical Zone Model: AgroIBIS - MODFLOW (AIM)

    NASA Astrophysics Data System (ADS)

    Evren Soylu, M.; Zipper, Samuel C.; Loheide, Steven P., II; Kucharik, Christopher J.

    2016-04-01

    Shallow groundwater may influence land surface energy, water, carbon balances and terrestrial ecosystems by altering the root zone soil moisture dynamics in 22 - 32% of the Earth's land area. However, our current understanding of the impacts of shallow groundwater on ecosystem dynamics and land surface processes is hampered by both a lack of observations and current capabilities of the state-of-the-art ecosystem models to simulate shallow groundwater as a working part of the groundwater-soil-vegetation-atmosphere (critical zone) transfer scheme. Existing models are able to simulate water and energy fluxes with highly accurate process-based approaches in a single compartment (e.g., vadose zone - HYDRUS, or groundwater - MODFLOW) or multiple compartments (e.g., groundwater & vadose zone MODFLOW-VSF, vadose zone & vegetation- Agro-IBIS) of the critical zone by oversimplifying or ignoring the other compartments. In this study, we present a newly developed critical zone model, AgroIBIS-MODFLOW (AIM). AIM is capable of simulating ecohydrological processes across the complete critical zone. AIM is a fully coupled agroecosystem/dynamic vegetation model (AgroIBIS), variably saturated flow model (HYDRUS-1D), and groundwater flow model (MODFLOW). We analyze the performance of AIM by comparing the model with saturated and unsaturated flow experiments as well as results from other models. Moreover, to demonstrate AIM's potential for simulating ecohydrological processes and feedbacks, we present a hypothetical watershed scale case where the indirect impacts of land use change on agricultural productivity due to altered groundwater recharge and water table depth.

  10. Researcher / Researched: Repositioning Research Paradigms

    ERIC Educational Resources Information Center

    Meerwald, Agnes May Lin

    2013-01-01

    "Researcher / Researched" calls for a complementary research methodology by proposing autoethnography as both a method and text that crosses the boundaries of conventional and alternative methodologies in higher education. Autoethnography rearticulates the researcher / researched positions by blurring the boundary between them. This…

  11. An Opening Chapter of the First Generation of Artificial Intelligence in Medicine: The First Rutgers AIM Workshop, June 1975

    PubMed Central

    2015-01-01

    Summary The first generation of Artificial Intelligence (AI) in Medicine methods were developed in the early 1970’s drawing on insights about problem solving in AI. They developed new ways of representing structured expert knowledge about clinical and biomedical problems using causal, taxonomic, associational, rule, and frame-based models. By 1975, several prototype systems had been developed and clinically tested, and the Rutgers Research Resource on Computers in Biomedicine hosted the first in a series of workshops on AI in Medicine that helped researchers and clinicians share their ideas, demonstrate their models, and comment on the prospects for the field. These developments and the workshops themselves benefited considerably from Stanford’s SUMEX-AIM pioneering experiment in biomedical computer networking. This paper focuses on discussions about issues at the intersection of medicine and artificial intelligence that took place during the presentations and panels at the First Rutgers AIM Workshop in New Brunswick, New Jersey from June 14 to 17, 1975. PMID:26123911

  12. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  13. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  14. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  15. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  16. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  17. Silage Additives and Management Issues

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inoculants are the most common silage additives in the United States. These products contain lactic acid bacteria to supplement the lactic acid bacteria naturally on the crop and help insure a consistent fermentation in the silo. There are three types of inoculants: homofermentative lactic acid bact...

  18. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  19. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  20. Evaluation of a School-Based Program Aimed at Preventing Depressive Symptoms in Adolescents

    PubMed Central

    Jakobsson, Ulf; Carlsson, Katarina Steen; Berg, Agneta; Clausson, Eva K.

    2015-01-01

    The aim of this pilot study was to evaluate the implementation of a universal school-based cognitive behavioral program whose target is to prevent depressive symptoms in adolescents. The study had a quasi-experimental design with pretest, posttest, and a 1-year follow-up and provides an illustrative calculation for the implementation costs of the intervention. Sixty-two students (aged 14) and seven tutors participated. A majority of the students and all of the tutors were satisfied with the intervention. The students, both females and males, rated their depressed symptoms as significantly lower after the course; and for the females, this was maintained 1-year postintervention. The implementation costs for the initial 2 years were about US$300 per student. Positive effects of a universal school-based cognitive behavioral intervention aiming at preventing depressive symptoms in adolescents were found, especially among females. PMID:24526572