Science.gov

Sample records for additional sensitivity experiments

  1. Sensitivity of Arctic Permafrost Carbon in the Mackenzie River Basin: A substrate addition and incubation experiment

    NASA Astrophysics Data System (ADS)

    Hedgpeth, A.; Beilman, D.; Crow, S. E.

    2014-12-01

    Arctic soil organic matter (SOM) mineralization processes are fundamental to the functioning of high latitude soils in relation to nutrients, stability, and feedbacks to atmospheric CO2 and climate. The arctic permafrost zone covers 25% of the northern hemisphere and contains 1672Pg of soil carbon (C). 88% of this C currently resides in frozen soils that are vulnerable to environmental change. For instance, arctic growing seasons may be lengthened, resulting in an increase in plant productivity and rate of below ground labile C inputs as root exudates. Understanding controls on Arctic SOM dynamics requires recognition that labile C inputs have the potential to significantly affect mineralization of previously stable SOM, also known as 'priming effects'. We conducted a substrate addition incubation experiment to quantify and compare respiration in highly organic (42-48 %C) permafrost soils along a north-south transect in western Canada. Near surface soils (10-20 cm) were collected from permafrost peatland sites in the Mackenzie River Basin from 69.2-62.6°N. The surface soils are fairly young (Δ14C values > -140.0) and can be assumed to contain relatively reactive soil carbon. To assess whether addition of labile substrate alters SOM decomposition dynamics, 4.77-11.75 g of permafrost soil were spiked with 0.5 mg D-glucose g-1 soil and incubated at 5°C. A mass balance approach was used to determin substrate-induced respiration and preliminary results suggest a potential for positive priming in these C-rich soils. Baseline respiration rates from the three sites were similar (0.067-0.263 mg CO2 g-1 soil C) yet show some site-specific trends. The rate at which added substrate was utilized within these soils suggests that other factors besides temperature and soil C content are controlling substrate consumption and its effect on SOM decomposition. Microbial activity can be stimulated by substrate addition to such an extent that SOM turnover is enhanced, suggesting that

  2. Sensitivity enhancement in the TROSY experiment.

    PubMed

    Czisch, M; Boelens, R

    1998-09-01

    A modification of the TROSY experiment which allows for sensitivity enhancement without introduction of additional delays is presented. The method relies on the combination of two orthogonal pathways and results in a signal-to-noise gain of 2 independent of the size of the molecule. The sensitivity enhanced TROSY scheme can be combined with gradient coherence selection. The method has been applied to the 269 residue serine protease PB92. PMID:9740742

  3. Sensitivity Enhancement in the TROSY Experiment

    NASA Astrophysics Data System (ADS)

    Czisch, M.; Boelens, R.

    1998-09-01

    A modification of the TROSY experiment which allows for sensitivity enhancement without introduction of additional delays is presented. The method relies on the combination of two orthogonal pathways and results in a signal-to-noise gain of2independent of the size of the molecule. The sensitivity enhanced TROSY scheme can be combined with gradient coherence selection. The method has been applied to the 269 residue serine protease PB92.

  4. French and English Together: An "Additive" Experience

    ERIC Educational Resources Information Center

    Wiltshire, Jessica; Harbon, Lesley

    2010-01-01

    This paper examines the nature of the "additive" experience of a bilingual French-English curriculum at Killarney Heights Public School in New South Wales. Predictably, the well-supported "additive" nature of the languages program model elicited positive reactions regarding educational success. The paper also explores issues for administration,…

  5. Nitrogen Addition Enhances Drought Sensitivity of Young Deciduous Tree Species

    PubMed Central

    Dziedek, Christoph; Härdtle, Werner; von Oheimb, Goddert; Fichtner, Andreas

    2016-01-01

    Understanding how trees respond to global change drivers is central to predict changes in forest structure and functions. Although there is evidence on the mode of nitrogen (N) and drought (D) effects on tree growth, our understanding of the interplay of these factors is still limited. Simultaneously, as mixtures are expected to be less sensitive to global change as compared to monocultures, we aimed to investigate the combined effects of N addition and D on the productivity of three tree species (Fagus sylvatica, Quercus petraea, Pseudotsuga menziesii) in relation to functional diverse species mixtures using data from a 4-year field experiment in Northwest Germany. Here we show that species mixing can mitigate the negative effects of combined N fertilization and D events, but the community response is mainly driven by the combination of certain traits rather than the tree species richness of a community. For beech, we found that negative effects of D on growth rates were amplified by N fertilization (i.e., combined treatment effects were non-additive), while for oak and fir, the simultaneous effects of N and D were additive. Beech and oak were identified as most sensitive to combined N+D effects with a strong size-dependency observed for beech, suggesting that the negative impact of N+D becomes stronger with time as beech grows larger. As a consequence, the net biodiversity effect declined at the community level, which can be mainly assigned to a distinct loss of complementarity in beech-oak mixtures. This pattern, however, was not evident in the other species-mixtures, indicating that neighborhood composition (i.e., trait combination), but not tree species richness mediated the relationship between tree diversity and treatment effects on tree growth. Our findings point to the importance of the qualitative role (‘trait portfolio’) that biodiversity play in determining resistance of diverse tree communities to environmental changes. As such, they provide

  6. Nitrogen Addition Enhances Drought Sensitivity of Young Deciduous Tree Species.

    PubMed

    Dziedek, Christoph; Härdtle, Werner; von Oheimb, Goddert; Fichtner, Andreas

    2016-01-01

    Understanding how trees respond to global change drivers is central to predict changes in forest structure and functions. Although there is evidence on the mode of nitrogen (N) and drought (D) effects on tree growth, our understanding of the interplay of these factors is still limited. Simultaneously, as mixtures are expected to be less sensitive to global change as compared to monocultures, we aimed to investigate the combined effects of N addition and D on the productivity of three tree species (Fagus sylvatica, Quercus petraea, Pseudotsuga menziesii) in relation to functional diverse species mixtures using data from a 4-year field experiment in Northwest Germany. Here we show that species mixing can mitigate the negative effects of combined N fertilization and D events, but the community response is mainly driven by the combination of certain traits rather than the tree species richness of a community. For beech, we found that negative effects of D on growth rates were amplified by N fertilization (i.e., combined treatment effects were non-additive), while for oak and fir, the simultaneous effects of N and D were additive. Beech and oak were identified as most sensitive to combined N+D effects with a strong size-dependency observed for beech, suggesting that the negative impact of N+D becomes stronger with time as beech grows larger. As a consequence, the net biodiversity effect declined at the community level, which can be mainly assigned to a distinct loss of complementarity in beech-oak mixtures. This pattern, however, was not evident in the other species-mixtures, indicating that neighborhood composition (i.e., trait combination), but not tree species richness mediated the relationship between tree diversity and treatment effects on tree growth. Our findings point to the importance of the qualitative role ('trait portfolio') that biodiversity play in determining resistance of diverse tree communities to environmental changes. As such, they provide further

  7. Lessening Sensitivity: Student Experiences of Teaching and Learning Sensitive Issues

    ERIC Educational Resources Information Center

    Lowe, Pam

    2015-01-01

    Despite growing interest in learning and teaching as emotional activities, there is still very little research on experiences of sensitive issues. Using qualitative data from students from a range of social science disciplines, this study investigates student's experiences. The paper highlights how, although they found it difficult and…

  8. Threat sensitivity, incentive sensitivity, and the experience of relief.

    PubMed

    Carver, Charles S

    2009-02-01

    Relief is a positively valenced affect that occurs when a threat is removed or avoided. Among dimensional theories, this experience is accounted for by appealing to one of two different self-regulatory systems. Some hold that an approach system is responsible for all types of positively valenced affect, including this one. Others hold that an avoidance system is responsible for this particular positive affect. Two studies are reported (total N=422) that examined this issue, using a method in which individual differences in overall threat sensitivity and incentive sensitivity were assessed and related to responses to relief-related hypothetical scenarios. Threat sensitivity was the strongest positive correlate of relief in both studies. Reward responsiveness also related positively (independently) to relief. Fun seeking related inversely to relief. Discussion centers on theoretical implications of the findings for viewing effects of threat sensitivity, and on relations between dimensional and appraisal-based views of affective experience. PMID:19076994

  9. Cloud/climate sensitivity experiments

    NASA Technical Reports Server (NTRS)

    Roads, J. O.; Vallis, G. K.; Remer, L.

    1982-01-01

    A study of the relationships between large-scale cloud fields and large scale circulation patterns is presented. The basic tool is a multi-level numerical model comprising conservation equations for temperature, water vapor and cloud water and appropriate parameterizations for evaporation, condensation, precipitation and radiative feedbacks. Incorporating an equation for cloud water in a large-scale model is somewhat novel and allows the formation and advection of clouds to be treated explicitly. The model is run on a two-dimensional, vertical-horizontal grid with constant winds. It is shown that cloud cover increases with decreased eddy vertical velocity, decreased horizontal advection, decreased atmospheric temperature, increased surface temperature, and decreased precipitation efficiency. The cloud field is found to be well correlated with the relative humidity field except at the highest levels. When radiative feedbacks are incorporated and the temperature increased by increasing CO2 content, cloud amounts decrease at upper-levels or equivalently cloud top height falls. This reduces the temperature response, especially at upper levels, compared with an experiment in which cloud cover is fixed.

  10. Thermal Sensitive Foils in Physics Experiments

    ERIC Educational Resources Information Center

    Bochnícek, Zdenek; Konecný, Pavel

    2014-01-01

    The paper describes a set of physics demonstration experiments where thermal sensitive foils are used for the detection of the two dimensional distribution of temperature. The method is used for the demonstration of thermal conductivity, temperature change in adiabatic processes, distribution of electromagnetic radiation in a microwave oven and…

  11. Ramp Compression Experiments - a Sensitivity Study

    SciTech Connect

    Bastea, M; Reisman, D

    2007-02-26

    We present the first sensitivity study of the material isentropes extracted from ramp compression experiments. We perform hydrodynamic simulations of representative experimental geometries associated with ramp compression experiments and discuss the major factors determining the accuracy of the equation of state information extracted from such data. In conclusion, we analyzed both qualitatively and quantitatively the major experimental factors that determine the accuracy of equations of state extracted from ramp compression experiments. Since in actual experiments essentially all the effects discussed here will compound, factoring out individual signatures and magnitudes, as done in the present work, is especially important. This study should provide some guidance for the effective design and analysis of ramp compression experiments, as well as for further improvements of ramp generators performance.

  12. Sensitivity analysis of geometric errors in additive manufacturing medical models.

    PubMed

    Pinto, Jose Miguel; Arrieta, Cristobal; Andia, Marcelo E; Uribe, Sergio; Ramos-Grez, Jorge; Vargas, Alex; Irarrazaval, Pablo; Tejos, Cristian

    2015-03-01

    Additive manufacturing (AM) models are used in medical applications for surgical planning, prosthesis design and teaching. For these applications, the accuracy of the AM models is essential. Unfortunately, this accuracy is compromised due to errors introduced by each of the building steps: image acquisition, segmentation, triangulation, printing and infiltration. However, the contribution of each step to the final error remains unclear. We performed a sensitivity analysis comparing errors obtained from a reference with those obtained modifying parameters of each building step. Our analysis considered global indexes to evaluate the overall error, and local indexes to show how this error is distributed along the surface of the AM models. Our results show that the standard building process tends to overestimate the AM models, i.e. models are larger than the original structures. They also show that the triangulation resolution and the segmentation threshold are critical factors, and that the errors are concentrated at regions with high curvatures. Errors could be reduced choosing better triangulation and printing resolutions, but there is an important need for modifying some of the standard building processes, particularly the segmentation algorithms. PMID:25649961

  13. Fire extinct experiments with water mist by adding additives

    NASA Astrophysics Data System (ADS)

    Yang, Lijun; Zhao, Jianbo

    2011-12-01

    The effects of fire extinguishment with water mist by adding different additives were studied. Tens of chemical substances (including alkali metal salt, dilution agent and surface active agent) were selected as additives due to their different extinct mechanisms. At first the performance of fire extinguishment with single additive was studied, then the effects of the same kinds of chemical substances under the same mass fraction were compared to study their influences on the fire extinguishment factors, including extinct time, fire temperature and oxygen concentration from which the fire extinct mechanism with additives could be concluded. Based on this the experiments were conducted to study the cooperate effect of the complexity of different additives. It indicated the relations between different firefighting mechanisms and different additives were competitive. From a large number of experiments the extinct mechanism with water mist by adding additives was concluded and an optimal compounding additive was selected.

  14. Antideuteron sensitivity for the GAPS experiment

    NASA Astrophysics Data System (ADS)

    Aramaki, T.; Hailey, C. J.; Boggs, S. E.; von Doetinchem, P.; Fuke, H.; Mognet, S. I.; Ong, R. A.; Perez, K.; Zweerink, J.

    2016-02-01

    The General Antiparticle Spectrometer (GAPS) is a novel approach for indirect dark matter searches that exploits cosmic antiparticles, especially antideuterons. The GAPS antideuteron measurement utilizes distinctive detection methods using atomic X-rays and charged particles from the decay of exotic atoms as well as the timing and stopping range of the incoming particle, which together provide excellent antideuteron identification. Prior to the future balloon experiment, an accelerator test and a prototype flight were successfully conducted in 2005 and 2012 respectively, in order to verify the GAPS detection concept. This paper describes how the sensitivity of GAPS to antideuterons was estimated using a Monte Carlo simulation along with the atomic cascade model and the Intra-Nuclear Cascade model. The sensitivity for the GAPS antideuteron search obtained using this method is 2.0 ×10-6 [m-2s-1sr-1(GeV/n)-1] for the proposed long duration balloon program (LDB, 35 days × 3 flights), indicating that GAPS has a strong potential to probe a wide variety of dark matter annihilation and decay models through antideuteron measurements. GAPS is proposed to fly from Antarctica in the austral summer of 2019-2020.

  15. Additional Investigations of Ice Shape Sensitivity to Parameter Variations

    NASA Technical Reports Server (NTRS)

    Miller, Dean R.; Potapczuk, Mark G.; Langhals, Tammy J.

    2006-01-01

    A second parameter sensitivity study was conducted at the NASA Glenn Research Center's Icing Research Tunnel (IRT) using a 36 in. chord (0.91 m) NACA-0012 airfoil. The objective of this work was to further investigate the feasibility of using ice shape feature changes to define requirements for the simulation and measurement of SLD and appendix C icing conditions. A previous study concluded that it was feasible to use changes in ice shape features (e.g., ice horn angle, ice horn thickness, and ice shape mass) to detect relatively small variations in icing spray condition parameters (LWC, MVD, and temperature). The subject of this current investigation extends the scope of this previous work, by also examining the effect of icing tunnel spray-bar parameter variations (water pressure, air pressure) on ice shape feature changes. The approach was to vary spray-bar water pressure and air pressure, and then evaluate the effects of these parameter changes on the resulting ice shapes. This paper will provide a description of the experimental method, present selected experimental results, and conclude with an evaluation of these results.

  16. Polymer Photooxidation: An Experiment to Demonstrate the Effect of Additives.

    ERIC Educational Resources Information Center

    Allen, Norman S.; McKellar, John F.

    1979-01-01

    This undergraduate experiment shows that the inclusion of an appropriate additive can have a very marked effect on the physical properties of a polymer. The polymer used is polypropylene and the additives are 2-hydroxy-4-octyloxy-benzophenone and benzophenone. (BB)

  17. Father's brain is sensitive to childcare experiences

    PubMed Central

    Abraham, Eyal; Hendler, Talma; Shapira-Lichter, Irit; Kanat-Maymon, Yaniv; Zagoory-Sharon, Orna; Feldman, Ruth

    2014-01-01

    Although contemporary socio-cultural changes dramatically increased fathers' involvement in childrearing, little is known about the brain basis of human fatherhood, its comparability with the maternal brain, and its sensitivity to caregiving experiences. We measured parental brain response to infant stimuli using functional MRI, oxytocin, and parenting behavior in three groups of parents (n = 89) raising their firstborn infant: heterosexual primary-caregiving mothers (PC-Mothers), heterosexual secondary-caregiving fathers (SC-Fathers), and primary-caregiving homosexual fathers (PC-Fathers) rearing infants without maternal involvement. Results revealed that parenting implemented a global “parental caregiving” neural network, mainly consistent across parents, which integrated functioning of two systems: the emotional processing network including subcortical and paralimbic structures associated with vigilance, salience, reward, and motivation, and mentalizing network involving frontopolar-medial-prefrontal and temporo-parietal circuits implicated in social understanding and cognitive empathy. These networks work in concert to imbue infant care with emotional salience, attune with the infant state, and plan adequate parenting. PC-Mothers showed greater activation in emotion processing structures, correlated with oxytocin and parent-infant synchrony, whereas SC-Fathers displayed greater activation in cortical circuits, associated with oxytocin and parenting. PC-Fathers exhibited high amygdala activation similar to PC-Mothers, alongside high activation of superior temporal sulcus (STS) comparable to SC-Fathers, and functional connectivity between amygdala and STS. Among all fathers, time spent in direct childcare was linked with the degree of amygdala-STS connectivity. Findings underscore the common neural basis of maternal and paternal care, chart brain–hormone–behavior pathways that support parenthood, and specify mechanisms of brain malleability with

  18. Additives and salts for dye-sensitized solar cells electrolytes: what is the best choice?

    NASA Astrophysics Data System (ADS)

    Bella, Federico; Sacco, Adriano; Pugliese, Diego; Laurenti, Marco; Bianco, Stefano

    2014-10-01

    A multivariate chemometric approach is proposed for the first time for performance optimization of I-/I3- liquid electrolytes for dye-sensitized solar cells (DSSCs). Over the years the system composed by iodide/triiodide redox shuttle dissolved in organic solvent has been enriched with the addition of different specific cations and chemical compounds to improve the photoelectrochemical behavior of the cell. However, usually such additives act favorably with respect to some of the cell parameters and negatively to others. Moreover, the combined action of different compounds often yields contradictory results, and from the literature it is not possible to identify an optimal recipe. We report here a systematic work, based on a multivariate experimental design, to statistically and quantitatively evaluate the effect of different additives on the photovoltaic performances of the device. The effect of cation size in iodine salts, the iodine/iodide ratio in the electrolyte and the effect of type and concentration of additives are mutually evaluated by means of a Design of Experiment (DoE) approach. Through this statistical method, the optimization of the overall parameters is demonstrated with a limited number of experimental trials. A 25% improvement on the photovoltaic conversion efficiency compared with that obtained with a commercial electrolyte is demonstrated.

  19. Estimation of stream nutrient uptake from nutrient addition experiments

    SciTech Connect

    Payn, Robert

    2005-09-01

    Nutrient uptake in streams is often quantified by determining nutrient uptake length. However, current methods for measuring nutrient uptake length are often impractical, expensive, or demonstrably incorrect. We have developed a new method to estimate ambient nutrient uptake lengths using field experiments involving several levels of nutrient addition. Data analysis involves plotting nutrient addition uptake lengths versus added concentration and extrapolating to the negative ambient concentration. This method is relatively easy, inexpensive, and based on sound theoretical development. It is more accurate than the commonly used method involving a single nutrient addition. The utility of the method is supported by field studies directly comparing our new method with isotopic tracer methods for determining uptake lengths of phosphorus, ammonium, and nitrate. Our method also provides parameters for comparing potential nutrient limitation among streams.

  20. Effects of an additional dimension in the Young experiment

    SciTech Connect

    Barros, Allan Kardec

    2015-09-15

    The results of the Young experiment can be analyzed either by classical or Quantum Physics. The later one though leads to a more complete interpretation, based on two different patterns that appear when one works either with single or double slits. Here we show that the two patterns can be derived from a single principle, in the context of General Relativity, if one assumes an additional spatial dimension to the four known today. The found equations yield the same results as those in Quantum Mechanics.

  1. LOX/GOX sensitivity of fluoroelastomers. [effect of formulation components and addition of fire retardants

    NASA Technical Reports Server (NTRS)

    Kirshen, N.; Mill, T.

    1973-01-01

    The effect of formulation components and the addition of fire retardants on the impact sensitivity of Viton B fluoroelastomer in liquid oxygen was studied with the objective of developing a procedure for reliably reducing this sensitivity. Component evaluation, carried out on more than 40 combinations of components and cure cycles, showed that almost all the standard formulation agents, including carbon, MgO, Diak-3, and PbO2, will sensitize the Viton stock either singly or in combinations, some combinations being much more sensitive than others. Cure and postcure treatments usually reduced the sensitivity of a given formulation, often dramatically, but no formulated Viton was as insensitive as the pure Viton B stock. Coating formulated Viton with a thin layer of pure Viton gave some indication of reduced sensitivity, but additional tests are needed. It is concluded that sensitivity in formulated Viton arises from a variety of sources, some physical and some chemical in origin. Elemental analyses for all the formulated Vitons are reported as are the results of a literature search on the subject of LOX impact sensitivity.

  2. Interoceptive Sensitivity and Self-Reports of Emotional Experience

    PubMed Central

    Barrett, Lisa Feldman; Quigley, Karen S.; Bliss-Moreau, Eliza; Aronson, Keith R.

    2005-01-01

    People differ in the extent to which they emphasize feelings of activation or deactivation in their verbal reports of experienced emotion, termed arousal focus (AF). Two multimethod studies indicate that AF is linked to heightened interoceptive sensitivity (as measured by performance on a heartbeat detection task). People who were more sensitive to their heartbeats emphasized feelings of activation and deactivation when reporting their experiences of emotion over time more than did those who were less sensitive. This relationship was not accounted for by several other variables, including simple language effects. Implications for the role of interoception in experienced emotion and the validity of self-reported emotion are discussed. PMID:15535779

  3. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  4. Effect of basic additives on sensitivity and diffusion of acid in chemical amplification resists

    NASA Astrophysics Data System (ADS)

    Asakawa, Koji; Ushirogouchi, Tohru; Nakase, Makoto

    1995-06-01

    The effect of amine additives in chemical amplification resists is discussed. Phenolic amines such as 4-aminophenol and 2-(4-aminophenyl)-2-(4-hydroxyphenyl) propane were investigated as model compounds from the viewpoint of sensitivity, diffusion and resolution. Equal molar amounts of acid and amine deactivated at the very beginning of post-exposure bake, and could not participate in decomposing the inhibitor as a catalyst. Only the acid which survived from the deactivation diffuses in the resist, decomposing the inhibitors from the middle to late stage of PEB. The basic additives reduce the diffusion range of the acid, especially for long-range diffusion, resulting in higher contrast at the interfaces between the exposed and unexposed areas. In addition, the amine concentration required is found to be less than the concentration which causes the resist sensitivity to start decreasing.

  5. Sensitivity Tuning through Additive Heterogeneous Plasmon Coupling between 3D Assembled Plasmonic Nanoparticle and Nanocup Arrays.

    PubMed

    Seo, Sujin; Zhou, Xiangfei; Liu, Gang Logan

    2016-07-01

    Plasmonic substrates have fixed sensitivity once the geometry of the structure is defined. In order to improve the sensitivity, significant research effort has been focused on designing new plasmonic structures, which involves high fabrication costs; however, a method is reported for improving sensitivity not by redesigning the structure but by simply assembling plasmonic nanoparticles (NPs) near the evanescent field of the underlying 3D plasmonic nanostructure. Here, a nanoscale Lycurgus cup array (nanoLCA) is employed as a base colorimetric plasmonic substrate and an assembly template. Compared to the nanoLCA, the NP assembled nanoLCA (NP-nanoLCA) exhibits much higher sensitivity for both bulk refractive index sensing and biotin-streptavidin binding detection. The limit of detection of the NP-nanoLCA is at least ten times smaller when detecting biotin-streptavidin conjugation. The numerical calculations confirm the importance of the additive plasmon coupling between the NPs and the nanoLCA for a denser and stronger electric field in the same 3D volumetric space. Tunable sensitivity is accomplished by controlling the number of NPs in each nanocup, or the number density of the hot spots. This simple yet scalable and cost-effective method of using additive heterogeneous plasmon coupling effects will benefit various chemical, medical, and environmental plasmon-based sensors. PMID:27206214

  6. Effects of Prematurity on the Development of Contrast Sensitivity: Testing the Visual Experience Hypothesis

    PubMed Central

    Bosworth, Rain G.; Dobkins, Karen R.

    2013-01-01

    In order to investigate the effects of visual experience on early visual development, the current study compared contrast sensitivity across infants born with different levels of moderate-to-late prematurity. Here the logic is that at any given postterm age, the most premature infants will have the oldest postnatal age. Given that postnatal age is a proxy for visual experience, the visual experience hypothesis predicts that infants who are more premature, yet healthy, should have higher sensitivity. Luminance (light/dark) and chromatic (red/green) contrast sensitivities (CS) were measured in 236 healthy infants (born −10 to +2 weeks relative to due date) between 5 and 32 weeks postterm age from due date and 8 to 38 weeks postnatal from birth date. For chromatic CS, we found clear evidence that infants who were most premature within our sample had the highest sensitivity. Specifically, 4 to 10 additional weeks of visual experience, by virtue of being born early, enhanced chromatic CS. For luminance CS, similar but weaker results were seen. Here, only infants with an additional 6 to 10 weeks of visual experience, and only at later age points in development, showed enhanced sensitivity. However, CS in preterm infants was still below that of fullterm infants with equivalent postnatal age. In sum, these results suggest that chromatic CS is influenced more by prematurity (and possibly visual experience) than is luminance CS, which has implications for differential development of Parvocellular and Magnocellular pathways. PMID:23485427

  7. Victimization experiences and the stabilization of victim sensitivity

    PubMed Central

    Gollwitzer, Mario; Süssenbach, Philipp; Hannuschke, Marianne

    2015-01-01

    People reliably differ in the extent to which they are sensitive to being victimized by others. Importantly, “victim sensitivity” predicts how people behave in social dilemma situations: Victim-sensitive individuals are less likely to trust others and more likely to behave uncooperatively—especially in socially uncertain situations. This pattern can be explained with the sensitivity to mean intentions (SeMI) model, according to which victim sensitivity entails a specific and asymmetric sensitivity to contextual cues that are associated with untrustworthiness. Recent research is largely in line with the model’s prediction, but some issues have remained conceptually unresolved so far. For instance, it is unclear why and how victim sensitivity becomes a stable trait and which developmental and cognitive processes are involved in such stabilization. In the present article, we will discuss the psychological processes that contribute to a stabilization of victim sensitivity within persons, both across the life span (“ontogenetic stabilization”) and across social situations (“actual-genetic stabilization”). Our theoretical framework starts from the assumption that experiences of being exploited threaten a basic need, the need to trust. This need is so fundamental that experiences that threaten it receive a considerable amount of attention and trigger strong affective reactions. Associative learning processes can then explain (a) how certain contextual cues (e.g., facial expressions) become conditioned stimuli that elicit equally strong responses, (b) why these contextual untrustworthiness cues receive much more attention than, for instance, trustworthiness cues, and (c) how these cues shape spontaneous social expectations (regarding other people’s intentions). Finally, avoidance learning can explain why these cognitive processes gradually stabilize and become a trait: the trait which is referred to as victim sensitivity. PMID:25926806

  8. Neutrino Oscillation Parameter Sensitivity in Future Long-Baseline Experiments

    SciTech Connect

    Bass, Matthew

    2014-01-01

    The study of neutrino interactions and propagation has produced evidence for physics beyond the standard model and promises to continue to shed light on rare phenomena. Since the discovery of neutrino oscillations in the late 1990s there have been rapid advances in establishing the three flavor paradigm of neutrino oscillations. The 2012 discovery of a large value for the last unmeasured missing angle has opened the way for future experiments to search for charge-parity symmetry violation in the lepton sector. This thesis presents an analysis of the future sensitivity to neutrino oscillations in the three flavor paradigm for the T2K, NO A, LBNE, and T2HK experiments. The theory of the three flavor paradigm is explained and the methods to use these theoretical predictions to design long baseline neutrino experiments are described. The sensitivity to the oscillation parameters for each experiment is presented with a particular focus on the search for CP violation and the measurement of the neutrino mass hierarchy. The variations of these sensitivities with statistical considerations and experimental design optimizations taken into account are explored. The effects of systematic uncertainties in the neutrino flux, interaction, and detection predictions are also considered by incorporating more advanced simulations inputs from the LBNE experiment.

  9. Sensitivity Gain by Simultaneous Acquisition of Two Coherence Pathways: The HNCA + Experiment

    NASA Astrophysics Data System (ADS)

    Salzmann, Michael; Ross, Alfred; Czisch, Michael; Wider, Gerhard

    2000-03-01

    In most multidimensional nuclear magnetic resonance experiments a single and distinct coherence transfer pathway is selected by phase cycling or by pulsed field gradients. It was shown that simultaneously exploiting more than one coherence transfer pathway could increase the overall sensitivity of NMR experiments. However, sensitivity enhancement schemes described to date introduce additional delays in the pulse schemes, resulting in considerable decrease of the expected sensitivity gain when applied to biomolecules due their fast transverse relaxation. A novel sensitivity enhancement principle which increases sensitivity of an experiment by simultaneously exploiting two completely independent coherence pathways in a single NMR pulse scheme is presented in this paper. As an example an improved HNCA experiment, the HNCA+, is presented, which combines the "out-and-back" coherence transfer pathway used in HNCA with an "out-and-stay" experiment, analogous to HCANH, without adding any time periods compared to the conventional HNCA pulse sequence. The applicability of the HNCA+ was theoretically evaluated with regard to different sizes of peptides or proteins, which showed that the experimental time can be reduced twofold in ideal cases. The application of this novel experiment to a 7-kDa protein showed a 20% sensitivity gain of HNCA+ when compared to conventional HNCA.

  10. Sensitivity gain by simultaneous acquisition of two coherence pathways: the HNCA(+) experiment.

    PubMed

    Salzmann, M; Ross, A; Czisch, M; Wider, G

    2000-03-01

    In most multidimensional nuclear magnetic resonance experiments a single and distinct coherence transfer pathway is selected by phase cycling or by pulsed field gradients. It was shown that simultaneously exploiting more than one coherence transfer pathway could increase the overall sensitivity of NMR experiments. However, sensitivity enhancement schemes described to date introduce additional delays in the pulse schemes, resulting in considerable decrease of the expected sensitivity gain when applied to biomolecules due their fast transverse relaxation. A novel sensitivity enhancement principle which increases sensitivity of an experiment by simultaneously exploiting two completely independent coherence pathways in a single NMR pulse scheme is presented in this paper. As an example an improved HNCA experiment, the HNCA(+), is presented, which combines the "out-and-back" coherence transfer pathway used in HNCA with an "out-and-stay" experiment, analogous to HCANH, without adding any time periods compared to the conventional HNCA pulse sequence. The applicability of the HNCA(+) was theoretically evaluated with regard to different sizes of peptides or proteins, which showed that the experimental time can be reduced twofold in ideal cases. The application of this novel experiment to a 7-kDa protein showed a 20% sensitivity gain of HNCA(+) when compared to conventional HNCA. PMID:10698664

  11. Software reliability: Additional investigations into modeling with replicated experiments

    NASA Technical Reports Server (NTRS)

    Nagel, P. M.; Schotz, F. M.; Skirvan, J. A.

    1984-01-01

    The effects of programmer experience level, different program usage distributions, and programming languages are explored. All these factors affect performance, and some tentative relational hypotheses are presented. An analytic framework for replicated and non-replicated (traditional) software experiments is presented. A method of obtaining an upper bound on the error rate of the next error is proposed. The method was validated empirically by comparing forecasts with actual data. In all 14 cases the bound exceeded the observed parameter, albeit somewhat conservatively. Two other forecasting methods are proposed and compared to observed results. Although demonstrated relative to this framework that stages are neither independent nor exponentially distributed, empirical estimates show that the exponential assumption is nearly valid for all but the extreme tails of the distribution. Except for the dependence in the stage probabilities, Cox's model approximates to a degree what is being observed.

  12. Considerations about Z-scan sensitivity improvement: theory versus experiments

    NASA Astrophysics Data System (ADS)

    Godin, T.; Fromager, M.; Päivänranta, B.; Passilly, N.; Boudebs, G.; Cagniot, E.; Ait-Ameur, K.

    2009-06-01

    This paper reports an experimental demonstration of the improvement of the Z-scan technique’s sensitivity. It is shown that this sensitivity can be multiplied by a factor equal to almost 400 with the help of simple binary diffractive elements. Such a possibility was actually predicted theoretically in one of our previous papers. In this study, the interpretation is investigated in a wider context taking into account the definition of the signal normalisation as introduced by Z-scan and the well-known eclipsing Z-scan (EZ-scan) experiments. In particular, advantages and drawbacks are compared, by looking at the normalised or the unnormalised aperture transmission.

  13. Influence of electrolyte co-additives on the performance of dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Stergiopoulos, Thomas; Rozi, Evangelia; Karagianni, Chaido-Stefania; Falaras, Polycarpos

    2011-12-01

    The presence of specific chemical additives in the redox electrolyte results in an efficient increase of the photovoltaic performance of dye-sensitized solar cells (DSCs). The most effective additives are 4- tert-butylpyridine (TBP), N-methylbenzimidazole (NMBI) and guanidinium thiocyanate (GuNCS) that are adsorbed onto the photoelectrode/electrolyte interface, thus shifting the semiconductor's conduction band edge and preventing recombination with triiodides. In a comparative work, we investigated in detail the action of TBP and NMBI additives in ionic liquid-based redox electrolytes with varying iodine concentrations, in order to extract the optimum additive/I2 ratio for each system. Different optimum additive/I2 ratios were determined for TBP and NMBI, despite the fact that both generally work in a similar way. Further addition of GuNCS in the optimized electrolytic media causes significant synergistic effects, the action of GuNCS being strongly influenced by the nature of the corresponding co-additive. Under the best operation conditions, power conversion efficiencies as high as 8% were obtained.

  14. Light sterile neutrino sensitivity of 163Ho experiments

    NASA Astrophysics Data System (ADS)

    Gastaldo, L.; Giunti, C.; Zavanin, E. M.

    2016-06-01

    We explore the sensitivity of 163Ho electron capture experiments to neutrino masses in the standard framework of three-neutrino mixing and in the framework of 3+1 neutrino mixing with a sterile neutrino which mixes with the three standard active neutrinos, as indicated by the anomalies found in short-baseline neutrino oscillations experiments. We calculate the sensitivity to neutrino masses and mixing for different values of the energy resolution of the detectors, of the unresolved pileup fraction and of the total statistics of events, considering the expected values of these parameters in the two planned stages of the ECHo project (ECHo-1k and ECHo-1M). We show that an extension of the ECHo-1M experiment with the possibility to collect 1016 events will be competitive with the KATRIN experiment. This statistics will allow to explore part of the 3+1 mixing parameter space indicated by the global analysis of short-baseline neutrino oscillation experiments. In order to cover all the allowed region, a statistics of about 1017 events will be needed.

  15. Sense and sensitivity of double beta decay experiments

    NASA Astrophysics Data System (ADS)

    Gómez-Cadenas, J. J.; Martín-Albo, J.; Sorel, M.; Ferrario, P.; Monrabal, F.; Muñoz, J.; Novella, P.; Poves, A.

    2011-06-01

    The search for neutrinoless double beta decay is a very active field in which the number of proposals for next-generation experiments has proliferated. In this paper we attempt to address both the sense and the sensitivity of such proposals. Sensitivity comes first, by means of proposing a simple and unambiguous statistical recipe to derive the sensitivity to a putative Majorana neutrino mass, mββ. In order to make sense of how the different experimental approaches compare, we apply this recipe to a selection of proposals, comparing the resulting sensitivities. We also propose a ``physics-motivated range'' (PMR) of the nuclear matrix elements as a unifying criterium between the different nuclear models. The expected performance of the proposals is parametrized in terms of only four numbers: energy resolution, background rate (per unit time, isotope mass and energy), detection efficiency, and ββ isotope mass. For each proposal, both a reference and an optimistic scenario for the experimental performance are studied. In the reference scenario we find that all the proposals will be able to partially explore the degenerate spectrum, without fully covering it, although four of them (KamLAND-Zen, CUORE, NEXT and EXO) will approach the 50 meV boundary. In the optimistic scenario, we find that CUORE and the xenon-based proposals (KamLAND-Zen, EXO and NEXT) will explore a significant fraction of the inverse hierarchy, with NEXT covering it almost fully. For the long term future, we argue that 136Xe-based experiments may provide the best case for a 1-ton scale experiment, given the potentially very low backgrounds achievable and the expected scalability to large isotope masses.

  16. Sense and sensitivity of double beta decay experiments

    SciTech Connect

    Gómez-Cadenas, J.J.; Martín-Albo, J.; Sorel, M.; Ferrario, P.; Monrabal, F.; Muñoz, J.; Novella, P.; Poves, A. E-mail: justo.martin-albo@ific.uv.es E-mail: paola.ferrario@ific.uv.es E-mail: jmunoz@ific.uv.es E-mail: alfredo.poves@uam.es

    2011-06-01

    The search for neutrinoless double beta decay is a very active field in which the number of proposals for next-generation experiments has proliferated. In this paper we attempt to address both the sense and the sensitivity of such proposals. Sensitivity comes first, by means of proposing a simple and unambiguous statistical recipe to derive the sensitivity to a putative Majorana neutrino mass, m{sub ββ}. In order to make sense of how the different experimental approaches compare, we apply this recipe to a selection of proposals, comparing the resulting sensitivities. We also propose a ''physics-motivated range'' (PMR) of the nuclear matrix elements as a unifying criterium between the different nuclear models. The expected performance of the proposals is parametrized in terms of only four numbers: energy resolution, background rate (per unit time, isotope mass and energy), detection efficiency, and ββ isotope mass. For each proposal, both a reference and an optimistic scenario for the experimental performance are studied. In the reference scenario we find that all the proposals will be able to partially explore the degenerate spectrum, without fully covering it, although four of them (KamLAND-Zen, CUORE, NEXT and EXO) will approach the 50 meV boundary. In the optimistic scenario, we find that CUORE and the xenon-based proposals (KamLAND-Zen, EXO and NEXT) will explore a significant fraction of the inverse hierarchy, with NEXT covering it almost fully. For the long term future, we argue that {sup 136}Xe-based experiments may provide the best case for a 1-ton scale experiment, given the potentially very low backgrounds achievable and the expected scalability to large isotope masses.

  17. Reduced stress-sensitivity or increased reward experience: the psychological mechanism of response to antidepressant medication.

    PubMed

    Wichers, M C; Barge-Schaapveld, D Q C M; Nicolson, N A; Peeters, F; de Vries, M; Mengelers, R; van Os, J

    2009-03-01

    Depression has often been associated with increased negative affect reactivity to stress (Stress-Sensitivity) and reduced capacity to experience pleasure or positive affect (Reward Experience). To date, no studies have prospectively examined changes in Stress-Sensitivity and Reward Experience following antidepressant treatment. The sample included 83 depressed patients and 22 healthy controls. A randomized controlled trial was carried out with patients receiving either imipramine or placebo for 6 weeks. At baseline and 6 weeks, patients and controls participated in an Experience Sampling procedure, prospectively measuring ecologically valid daily life appraisals of activities and mood states. The course of depression was assessed with the Hamilton Depression Rating Scale (HDRS). Multilevel linear regression analyses showed that patients had higher negative and lower positive appraisals of activities than controls. In addition, patients showed increased Stress-Sensitivity (negative affect reactivity to negatively appraised activities). Treatment with imipramine decreased Stress-Sensitivity and increased Reward Experience (positive affect reactivity to positively appraised activities). Changes in Stress-Sensitivity and Reward Experience were in part reducible to changes in the process of activity appraisal itself. However, increase in Reward Experience, but not decrease in Stress-Sensitivity, discriminated between patients who responded and those who did not, independent of changes in the process of activity appraisal itself. Response to treatment in depression may be conditional on restoration of hedonic capacity, the cerebral substrate of which requires further study in relation to antidepressant response. A search for (synergistic) antidepressant therapies specifically targeting ability to experience reward may be warranted. PMID:18496519

  18. Responses of estuarine nematodes to an increase in nutrient supply: an in situ continuous addition experiment.

    PubMed

    Ferreira, R C; Nascimento-Junior, A B; Santos, P J P; Botter-Carvalho, M L; Pinto, T K

    2015-01-15

    An experiment was carried out on an estuarine mudflat to assess impacts of inorganic nutrients used to fertilize sugar-cane fields on the surrounding aquatic ecosystem, through changes in the nematode community structure. During 118 days, nine quadrats each 4m(2) were sampled six times after the beginning of fertilizer addition. The fertilizer was introduced weekly in six areas, at two different concentrations (low and high doses), and three areas were used as control. The introduction of nutrients modified key nematode community descriptors. In general, the nematodes were negatively affected over the study period. However, Comesa, Metachromadora, Metalinhomoeus, Spirinia and Terschellingia were considered tolerant, and other genera showed different degrees of sensitivity. Nutrient input also affect the availability and quality of food, changing the nematode trophic structure. The use of inorganic fertilizer should be evaluated with care because of the potential for damage to biological communities of coastal aquatic systems. PMID:25499965

  19. Sensitivity of LHC experiments to exotic highly ionising particles

    NASA Astrophysics Data System (ADS)

    De Roeck, A.; Katre, A.; Mermod, P.; Milstead, D.; Sloan, T.

    2012-04-01

    The experiments at the Large Hadron Collider (LHC) are able to discover or set limits on the production of exotic particles with TeV-scale masses possessing values of electric and/or magnetic charge such that they behave as highly ionising particles (HIPs). In this paper the sensitivity of the LHC experiments to HIP production is discussed in detail. It is shown that a number of different detection methods are required to investigate as fully as possible the charge-mass range. These include direct detection as the HIPs pass through either passive or active detectors and, in the case of magnetically charged objects, the so-called induction method with which magnetic monopoles which stop in accelerator and detector material could be observed. The benefit of using complementary approaches to HIP detection is discussed.

  20. Prior experience biases subcortical sensitivity to sound patterns.

    PubMed

    Skoe, Erika; Krizman, Jennifer; Spitzer, Emily; Kraus, Nina

    2015-01-01

    To make sense of our ever-changing world, our brains search out patterns. This drive can be so strong that the brain imposes patterns when there are none. The opposite can also occur: The brain can overlook patterns because they do not conform to expectations. In this study, we examined this neural sensitivity to patterns within the auditory brainstem, an evolutionarily ancient part of the brain that can be fine-tuned by experience and is integral to an array of cognitive functions. We have recently shown that this auditory hub is sensitive to patterns embedded within a novel sound stream, and we established a link between neural sensitivity and behavioral indices of learning [Skoe, E., Krizman, J., Spitzer, E., & Kraus, N. The auditory brainstem is a barometer of rapid auditory learning. Neuroscience, 243, 104-114, 2013]. We now ask whether this sensitivity to stimulus statistics is biased by prior experience and the expectations arising from this experience. To address this question, we recorded complex auditory brainstem responses (cABRs) to two patterned sound sequences formed from a set of eight repeating tones. For both patterned sequences, the eight tones were presented such that the transitional probability (TP) between neighboring tones was either 33% (low predictability) or 100% (high predictability). Although both sequences were novel to the healthy young adult listener and had similar TP distributions, one was perceived to be more musical than the other. For the more musical sequence, participants performed above chance when tested on their recognition of the most predictable two-tone combinations within the sequence (TP of 100%); in this case, the cABR differed from a baseline condition where the sound sequence had no predictable structure. In contrast, for the less musical sequence, learning was at chance, suggesting that listeners were "deaf" to the highly predictable repeating two-tone combinations in the sequence. For this condition, the cABR also

  1. Carbon flux from plants to soil microbes is highly sensitive to nitrogen addition and biochar amendment

    NASA Astrophysics Data System (ADS)

    Kaiser, C.; Solaiman, Z. M.; Kilburn, M. R.; Clode, P. L.; Fuchslueger, L.; Koranda, M.; Murphy, D. V.

    2012-04-01

    The release of carbon through plant roots to the soil has been recognized as a governing factor for soil microbial community composition and decomposition processes, constituting an important control for ecosystem biogeochemical cycles. Moreover, there is increasing awareness that the flux of recently assimilated carbon from plants to the soil may regulate ecosystem response to environmental change, as the rate of the plant-soil carbon transfer will likely be affected by increased plant C assimilation caused by increasing atmospheric CO2 levels. What has received less attention so far is how sensitive the plant-soil C transfer would be to possible regulations coming from belowground, such as soil N addition or microbial community changes resulting from anthropogenic inputs such as biochar amendments. In this study we investigated the size, rate and sensitivity of the transfer of recently assimilated plant C through the root-soil-mycorrhiza-microbial continuum. Wheat plants associated with arbuscular mycorrhizal fungi were grown in split-boxes which were filled either with soil or a soil-biochar mixture. Each split-box consisted of two compartments separated by a membrane which was penetrable for mycorrhizal hyphae but not for roots. Wheat plants were only grown in one compartment while the other compartment served as an extended soil volume which was only accessible by mycorrhizal hyphae associated with the plant roots. After plants were grown for four weeks we used a double-labeling approach with 13C and 15N in order to investigate interactions between C and N flows in the plant-soil-microorganism system. Plants were subjected to an enriched 13CO2 atmosphere for 8 hours during which 15NH4 was added to a subset of split-boxes to either the root-containing or the root-free compartment. Both, 13C and 15N fluxes through the plant-soil continuum were monitored over 24 hours by stable isotope methods (13C phospho-lipid fatty acids by GC-IRMS, 15N/13C in bulk plant

  2. Jerusalem artichoke and chungkookjang additively improve insulin secretion and sensitivity in diabetic rats.

    PubMed

    Yang, Hye Jeong; Kwon, Dae Young; Kim, Min Jung; Kang, Suna; Kim, Da Sol; Park, Sunmin

    2012-01-01

    Jerusalem artichoke (Helianthus tuberosus Linne, HTL) and chungkookjang (CKJ; fermented soybeans) both modulate energy and glucose metabolism. However, the mechanism and their additive effects are unknown. We investigated whether the consumption of HTL and CKJ altered insulin sensitivity, insulin secretion capacity and β-cell survival in type 2 diabetic animals. Rats were divided into partially pancreatectomized (Px) diabetic rats, and sham operated non-diabetic control rats and all fed high fat diets. Diabetic rats were sub-divided into an untreated diabetic control group and those fed 5% HTL, 5% CKJ or 5% HTL+5% CKJ for 8 weeks. HTL+CKJ treatment reduced visceral fat without modulating energy intake compared to the diabetic-control. Glucose tolerance was improved in an ascending order of diabetic-control, CKJ, HTL, HTL+CKJ, and normal-control, but by different mechanisms. CKJ and CKJ+HTL, but not HTL, increased first and second phase insulin secretion in comparison to the diabetic-control at hyperglycemic clamp. However, glucose infusion rates (mg/kg bw/min) were increased by and CKJ+HTL (13.5), but not HTL (9.4) or CKJ (9.5) alone, and HTL and CKJ+ HTL decreased hepatic glucose compared to diabetic-control during the hyperinsulinemic euglycemic study and were associated with decreased triglyceride accumulation and increased glycogen storage. The improved hepatic insulin sensitivity by HTL and CKJ+HTL was explained by potentiated insulin signaling (tyrosine phosphorylation of insulin receptor substrate 2→phosphorylation of Akt) and phosphorylation of AMPK→phosphorykation of acetyl Co carboxlase in comparison to diabetic-control and decreased PEPCK expression. Absolute β-cell mass was increased by CKJ (23.4mg) and CKJ+HTL (26.3 mg) by increasing proliferation compared to the diabetic-control (21.26 mg). Although HTL lowered β-cell apoptosis, it did not increase β-cell mass (20.8 mg). In conclusions, HTL and CKJ enhanced glucose tolerance in different

  3. Jerusalem artichoke and chungkookjang additively improve insulin secretion and sensitivity in diabetic rats

    PubMed Central

    2012-01-01

    Jerusalem artichoke (Helianthus tuberosus Linne, HTL) and chungkookjang (CKJ; fermented soybeans) both modulate energy and glucose metabolism. However, the mechanism and their additive effects are unknown. We investigated whether the consumption of HTL and CKJ altered insulin sensitivity, insulin secretion capacity and β-cell survival in type 2 diabetic animals. Rats were divided into partially pancreatectomized (Px) diabetic rats, and sham operated non-diabetic control rats and all fed high fat diets. Diabetic rats were sub-divided into an untreated diabetic control group and those fed 5% HTL, 5% CKJ or 5% HTL+5% CKJ for 8 weeks. HTL+CKJ treatment reduced visceral fat without modulating energy intake compared to the diabetic-control. Glucose tolerance was improved in an ascending order of diabetic-control, CKJ, HTL, HTL+CKJ, and normal-control, but by different mechanisms. CKJ and CKJ+HTL, but not HTL, increased first and second phase insulin secretion in comparison to the diabetic-control at hyperglycemic clamp. However, glucose infusion rates (mg/kg bw/min) were increased by and CKJ+HTL (13.5), but not HTL (9.4) or CKJ (9.5) alone, and HTL and CKJ+ HTL decreased hepatic glucose compared to diabetic-control during the hyperinsulinemic euglycemic study and were associated with decreased triglyceride accumulation and increased glycogen storage. The improved hepatic insulin sensitivity by HTL and CKJ+HTL was explained by potentiated insulin signaling (tyrosine phosphorylation of insulin receptor substrate 2→phosphorylation of Akt) and phosphorylation of AMPK→phosphorykation of acetyl Co carboxlase in comparison to diabetic-control and decreased PEPCK expression. Absolute β-cell mass was increased by CKJ (23.4mg) and CKJ+HTL (26.3 mg) by increasing proliferation compared to the diabetic-control (21.26 mg). Although HTL lowered β-cell apoptosis, it did not increase β-cell mass (20.8 mg). In conclusions, HTL and CKJ enhanced glucose tolerance in different

  4. Three-axis superconducting gravity gradiometer for sensitive gravity experiments

    NASA Astrophysics Data System (ADS)

    Moody, M. Vol; Paik, Ho Jung; Canavan, Edgar R.

    2002-11-01

    Superconducting differential accelerometers have been used to test Newton's inverse square law and have been proposed for other sensitive experiments. These include searches for spin-mass coupling, detecting Earth's gravitomagnetic field, and testing the Equivalence Principle. This article discusses the principle and performance of a sensitive three-axis gravity gradiometer. This device utilizes quantized flux and the Meissner effect to provide stable test mass levitation and signal coupling, and superconducting quantum interference devices to provide very low-noise amplification of the signals. The instrument comprises a total of nine superconducting accelerometers, six linear and three angular. This configuration permits simultaneous measurement of the diagonal components of the gravity gradient tensor as well as platform acceleration in all six degrees of freedom. An analysis of this instrument is presented along with experimental results. Methods to correct for various motion-induced errors are demonstrated. Other error sources are also discussed. The resulting performance of the superconducting gravity gradiometer is 2 x10-11 s-2 Hz-1/2.

  5. Long term temperature sensitivity of soil carbon pools in a prairie warming experiment

    NASA Astrophysics Data System (ADS)

    Hopkins, F. M.; Brennan, A. L.; Pendall, E.

    2012-12-01

    The temperature sensitivity of microbial respiration fluxes of CO2 from soil is a critical determinant of soil carbon stocks in a warming climate. While short-term effects of temperature on soil microbial metabolism are well known, the effects of warming on longer-lived soil carbon pools and under the altered substrate conditions that result from warming are less well understood, and critical to predicting future soil carbon stocks. We used a combination of carbon isotopes and experimental treatments to examine the temperature sensitivity of soil C pools of different ages. We sampled soils from the Wyoming Prairie Heating and CO2 Enrichment (PHACE) experiment, where addition of a carbon isotope tracer in elevated CO2 plots allowed us to separate the effect of temperature on respiration of C fixed prior to the experiment (> 5 years old) from carbon fixed more recently. We incubated soils at three temperatures in the laboratory to compare the temperature sensitivity of soil carbon pools from a combination of field treatments; vegetated vs. non-vegetated, and field warmed vs. ambient temperature. For the vegetated treatment, C residing in soil for at least 5 years (fixed prior to the experiment) contributed less than 10% of the total CO2 flux, with the majority of CO2 coming from soil C deposited more recently. However, pre-experiment C was about twice as temperature sensitive as newer C. In contrast, there was no difference in the temperature sensitivity of pre-experiment and younger C from the non-vegetated plots, where application of herbicide prevented new plant inputs for 4 growing seasons previous. A field warming treatment allowed us to investigate the effect of labile C depletion on temperature sensitivity. Specifically, field warmed soils were more substrate-depleted, with lower CO2 fluxes, and ~2/3 of respiration coming from pre-experiment C, compared to ~1/4 from the ambient temperature control. Despite the relative depletion of labile substrate

  6. Sensitive and robust electrophoretic NMR: Instrumentation and experiments

    NASA Astrophysics Data System (ADS)

    Hallberg, Fredrik; Furó, István; Yushmanov, Pavel V.; Stilbs, Peter

    2008-05-01

    Although simple as a concept, electrophoretic NMR (eNMR) has so far failed to find wider application. Problems encountered are mainly due to disturbing and partly irreproducible convection-like bulk flow effects from both electro-osmosis and thermal convection. Additionally, bubble formation at the electrodes and rf noise pickup has constrained the typical sample geometry to U-tube-like arrangements with a small filling factor and a low resulting NMR sensitivity. Furthermore, the sign of the electrophoretic mobility cancels out in U-tube geometries. We present here a new electrophoretic sample cell based on a vertically placed conventional NMR sample tube with bubble-suppressing palladium metal as electrode material. A suitable radiofrequency filter design prevents noise pickup by the NMR sample coil from the high-voltage leads which extend into the sensitive sample volume. Hence, the obtained signal-to-noise ratio of this cell is one order of magnitude higher than that of our previous U-tube cells. Permitted by the retention of the sign of the displacement-related signal phase in the new cell design, an experimental approach is described where bulk flow effects by electro-osmosis and/or thermal convection are compensated through parallel monitoring of a reference signal from a non-charged species in the sample. This approach, together with a CPMG-like pulse train scheme provides a superior first-order cancellation of non-electrophoretic bulk flow effects.

  7. Additive toxicity of herbicide mixtures and comparative sensitivity of tropical benthic microalgae.

    PubMed

    Magnusson, Marie; Heimann, Kirsten; Quayle, Pamela; Negri, Andrew P

    2010-11-01

    Natural waters often contain complex mixtures of unknown contaminants potentially posing a threat to marine communities through chemical interactions. Here, acute effects of the photosystem II-inhibiting herbicides diuron, tebuthiuron, atrazine, simazine, and hexazinone, herbicide breakdown products (desethyl-atrazine (DEA) and 3,4-dichloroaniline (3,4-DCA)) and binary mixtures, were investigated using three tropical benthic microalgae; Navicula sp. and Cylindrotheca closterium (Ochrophyta) and Nephroselmis pyriformis (Chlorophyta), and one standard test species, Phaeodactylum tricornutum (Ochrophyta), in a high-throughput Maxi-Imaging-PAM bioassay (Maxi-IPAM). The order of toxicity was; diuron > hexazinone > tebuthiuron > atrazine > simazine > DEA > 3,4-DCA for all species. The tropical green alga N. pyriformis was up to 10-fold more sensitive than the diatoms tested here and reported for coral symbionts, and is recommended as a standard tropical test species for future research. All binary mixtures exhibited additive toxicity, and the use of herbicide equivalents (HEq) is therefore recommended in order to incorporate total-maximum-load measures for environmental regulatory purposes. PMID:20800855

  8. Sensitivity to food additives, vaso-active amines and salicylates: a review of the evidence.

    PubMed

    Skypala, Isabel J; Williams, M; Reeves, L; Meyer, R; Venter, C

    2015-01-01

    Although there is considerable literature pertaining to IgE and non IgE-mediated food allergy, there is a paucity of information on non-immune mediated reactions to foods, other than metabolic disorders such as lactose intolerance. Food additives and naturally occurring 'food chemicals' have long been reported as having the potential to provoke symptoms in those who are more sensitive to their effects. Diets low in 'food chemicals' gained prominence in the 1970s and 1980s, and their popularity remains, although the evidence of their efficacy is very limited. This review focuses on the available evidence for the role and likely adverse effects of both added and natural 'food chemicals' including benzoate, sulphite, monosodium glutamate, vaso-active or biogenic amines and salicylate. Studies assessing the efficacy of the restriction of these substances in the diet have mainly been undertaken in adults, but the paper will also touch on the use of such diets in children. The difficulty of reviewing the available evidence is that few of the studies have been controlled and, for many, considerable time has elapsed since their publication. Meanwhile dietary patterns and habits have changed hugely in the interim, so the conclusions may not be relevant for our current dietary norms. The conclusion of the review is that there may be some benefit in the removal of an additive or a group of foods high in natural food chemicals from the diet for a limited period for certain individuals, providing the diagnostic pathway is followed and the foods are reintroduced back into the diet to assess for the efficacy of removal. However diets involving the removal of multiple additives and food chemicals have the very great potential to lead to nutritional deficiency especially in the paediatric population. Any dietary intervention, whether for the purposes of diagnosis or management of food allergy or food intolerance, should be adapted to the individual's dietary habits and a suitably

  9. Sensitivity alteration of fiber Bragg grating sensors with additive micro-scale bi-material coatings

    NASA Astrophysics Data System (ADS)

    Zhang, Xixi; Alemohammad, Hamidreza; Toyserkani, Ehsan

    2013-02-01

    This paper describes a combined fabrication method for creating a bi-material micro-scale coating on fiber Bragg grating (FBG) optical sensors using laser-assisted maskless microdeposition (LAMM) and electroless nickel plating. This bi-material coating alters the sensitivity of the sensor where it also acts as a protective layer. LAMM is used to coat bare FBGs with a 1-2 µm thick conductive silver layer followed by the electroless nickel plating process to increase layer thickness to a desired level ranging from 1 to 80 µm. To identify an optimum coating thickness and predict its effect on the sensor's sensitivity to force and temperature, an optomechanical model is developed in this study. According to the model if the thickness of the Ni layer is 30-50 µm, maximum temperature sensitivity is achieved. Our analytical and experimental results suggest that the temperature sensitivity of the coated FBG with 1 µm Ag and 33 µm Ni is almost doubled compared to a bare FBG with sensitivity of 0.011 ± 0.001 nm °C-1. In contrast, the force sensitivity is decreased; however, this sensitivity reduction is less than the values reported in the literature.

  10. Controlling the Electrostatic Discharge Ignition Sensitivity of Composite Energetic Materials Using Carbon Nanotube Additives

    SciTech Connect

    Kade H. Poper; Eric S. Collins; Michelle L. Pantoya; Michael Daniels

    2014-10-01

    Powder energetic materials are highly sensitive to electrostatic discharge (ESD) ignition. This study shows that small concentrations of carbon nanotubes (CNT) added to the highly reactive mixture of aluminum and copper oxide (Al + CuO) significantly reduces ESD ignition sensitivity. CNT act as a conduit for electric energy, bypassing energy buildup and desensitizing the mixture to ESD ignition. The lowest CNT concentration needed to desensitize ignition is 3.8 vol.% corresponding to percolation corresponding to an electrical conductivity of 0.04 S/cm. Conversely, added CNT increased Al + CuO thermal ignition sensitivity to a hot wire igniter.

  11. Gas Chromatographic Determination of Methyl Salicylate in Rubbing Alcohol: An Experiment Employing Standard Addition.

    ERIC Educational Resources Information Center

    Van Atta, Robert E.; Van Atta, R. Lewis

    1980-01-01

    Provides a gas chromatography experiment that exercises the quantitative technique of standard addition to the analysis for a minor component, methyl salicylate, in a commercial product, "wintergreen rubbing alcohol." (CS)

  12. Effects of Taiwan Roselle anthocyanin treatment and single-walled carbon nanotube addition on the performance of dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Chou, C. S.; Tsai, P. J.; Wu, P.; Shu, G. G.; Huang, Y. H.; Chen, Y. S.

    2014-04-01

    This study investigates the relationship between the performance of a dye-sensitized solar cell (DSSC) sensitized by a natural sensitizer of Taiwan Roselle anthocyanin (TRA) and fabrication process conditions of the DSSC. A set of systematic experiments has been carried out at various soaking temperatures, soaking periods, sensitizer concentrations, pH values, and additions of single-walled carbon nanotube (SWCNT). An absorption peak (520 nm) is found for TRA, and it is close to that of the N719 dye (518 nm). At a fixed concentration of TRA and a fixed soaking period, a lower pH of the extract or a lower soaking temperature is found favorable to the formation of pigment cations, which leads to an enhanced power conversion efficiency (η) of DSSC. For instance, by applying 17.53 mg/100ml TRA at 30 for 10 h, as the pH of the extract decreases to 2.00 from 2.33 (the original pH of TRA), the η of DSSC with TiO2+SWCNT electrode increases to 0.67% from 0.11% of a traditional DSSC with TiO2 electrode. This performance improvement can be explained by the combined effect of the pH of sensitizer and the additions of SWCNT, a first investigation in DSSC using the natural sensitizer with SWCNT.

  13. Voices from the Classroom: Experiences of Teachers of Deaf Students with Additional Disabilities

    ERIC Educational Resources Information Center

    Musyoka, Millicent Malinda; Gentry, Mary Anne; Bartlett, James Joseph

    2016-01-01

    The purpose of this research is to investigate experiences of K-12 classroom teachers of deaf students with additional disabilities. Today, more deaf and hard of hearing students are identified as having additional disabilities (Bruce, DiNatale & Ford, 2008; Ewing, 2011; Gallaudet Research Institute, 2011; Jones, Jones & Ewing, 2006;…

  14. Response of non-added solutes during nutrient addition experiments in streams

    NASA Astrophysics Data System (ADS)

    Rodriguez-Cardona, B.; Wymore, A.; Koenig, L.; Coble, A. A.; McDowell, W. H.

    2015-12-01

    Nutrient addition experiments, such as Tracer Additions for Spiraling Curve Characterization (TASCC), have become widely popular as a means to study nutrient uptake dynamics in stream ecosystems. However, the impact of these additions on ambient concentrations of non-added solutes is often overlooked. TASCC addition experiments are ideal for assessing interactions among solutes because it allows for the characterization of multiple solute concentrations across a broad range of added nutrient concentrations. TASCC additions also require the addition of a conservative tracer (NaCl) to track changes in conductivity during the experimental manipulation. Despite its use as a conservative tracer, chloride (Cl) and its associated sodium (Na) might change the concentrations of other ions and non-added nutrients through ion exchange or other processes. Similarly, additions of biologically active solutes might change the concentrations of other non-added solutes. These methodological issues in nutrient addition experiments have been poorly addressed in the literature. Here we examine the response of non-added solutes to pulse additions (i.e. TASCC) of NaCl plus nitrate (NO3-), ammonium, and phosphate across biomes including temperate and tropical forests, and arctic taiga. Preliminary results demonstrate that non-added solutes respond to changes in the concentration of these added nutrients. For example, concentrations of dissolved organic nitrogen (DON) in suburban headwater streams of New Hampshire both increase and decrease in response to NO3- additions, apparently due to biotic processes. Similarly, cations such as potassium, magnesium, and calcium also increase during TASCC experiments, likely due to cation exchange processes associated with Na addition. The response of non-added solutes to short-term pulses of added nutrients and tracers needs to be carefully assessed to ensure that nutrient uptake metrics are accurate, and to detect biotic interactions that may

  15. Constraining Glacier Sensitivity across the Andes: A Modeling Experiment

    NASA Astrophysics Data System (ADS)

    Sagredo, E. A.; Rupper, S.; Lowell, T. V.

    2011-12-01

    Valley glaciers are sensitive indicators of climate change. Records of former glacial fluctuations have been extensively used to reconstruct paleoclimatic conditions at different temporal and spatial scales. These reconstructions typically do not account for variations in regional climate conditions. Based on modeling results, it has been suggested these regional climate conditions could play an important role modulating the magnitude of glacier response for large scale climate perturbations. The climatically diverse Andes mountain range represents an ideal setting to test hypothesis of glacier sensitivity variability. Here, we quantify glacier sensitivity to climate change in different climatic regimes across the Andean. By applying a regional Surface Energy Mass Balance model (SEMB), we analyze the change in the Equilibrium Line Altitude (ELA) for a sample of 234 glaciers, under different climatic perturbations. Our results suggest that ELAs of Andean glaciers respond linearly to changes in temperature, with rates that oscillate between 153 and 186 m/°C. For example, with a perturbation of -6°C (~Global LGM), our model predicts a drop in the ELA of 916 m for the least sensitive glaciers and 1117 m for the more sensitive ones. This glacier sensitivity variability exhibits a very distinctive spatial distribution. The most sensitive glaciers are located in Central Chile (south of 31°C), and the Western Cordillera of Peru (north of 13°S). In contrast, lower sensitivity glaciers are situated in the inner Tropics, Eastern Cordillera of Peru and Bolivia (south of 13°S), and part of southern Patagonia and Tierra del Fuego. When analyzing the response of glaciers to changes in accumulation, our results suggest that under a scenario of increasing precipitation, glacier behavior is nonlinear. A statistical cluster analysis of glacier sensitivity divides our 234 glaciers into three distinct groups. The most sensitive glaciers correspond to those situated in western

  16. Oxidation phenomena: MAAP4 sensitivity studies using CORA-13 experiment

    SciTech Connect

    Luche, J.; Jacqmin, L.G.

    1996-12-31

    In France, both Electricite de France and Framatome are using the modular accident analysis program (MAAP) version 4 code for severe accident scenario analyses. Commissariat a l`Energie Atomique, in collaboration with them, is investigating the code prediction capabilities on hydrogen production. The purpose of this work is to evaluate the fuel-clad oxidation model on the CORA-13 test results and to find the most sensitive parameters to this reaction, especially during reflooding.

  17. Modifying structure-sensitive reactions by addition of Zn to Pd

    SciTech Connect

    Childers, David J.; Schweitzer, Neil M.; Kamali Shahari, Seyed Mehdi; Rioux, Robert M.; Miller, Jeffrey T.; Meyer, Randall J.

    2014-10-01

    Silica-supported Pd and PdZn nanoparticles of a similar size were evaluated for neopentane hydrogenolysis/isomerization and propane hydrogenolysis/dehydrogenation. Monometallic Pd showed high neopentane hydrogenolysis selectivity. Addition of small amounts of Zn to Pd lead Pd–Zn scatters in the EXAFS spectrum and an increase in the linear bonded CO by IR. In addition, the neopentane turnover rate decreased by nearly 10 times with little change in the selectivity. Increasing amounts of Zn lead to greater Pd–Zn interactions, higher linear-to-bridging CO ratios by IR and complete loss of neopentane conversion. Pd NPs also had high selectivity for propane hydrogenolysis and thus were poorly selective for propylene. The PdZn bimetallic catalysts, however, were able to preferentially catalyze dehydrogenation, were not active for propane hydrogenolysis, and thus were highly selective for propylene formation. The decrease in hydrogenolysis selectivity was attributed to the isolation of active Pd atoms by inactive metallic Zn,demonstrating that hydrogenolysis requires a particular reactive ensemble whereas propane dehydrogenation does not.

  18. Significant Life Experiences Revisited: A Review of Research on Sources of Environmental Sensitivity.

    ERIC Educational Resources Information Center

    Chawla, Louise

    1998-01-01

    States that environmental sensitivity, an important variable in environmental awareness and in the predisposition to take responsible environmental action, has been the subject of research in which sensitivity is associated with particular kinds of significant life experiences. Reviews studies of the significant life experiences of environmental…

  19. HCIT Contrast Performance Sensitivity Studies: Simulation Versus Experiment

    NASA Technical Reports Server (NTRS)

    Sidick, Erkin; Shaklan, Stuart; Krist, John; Cady, Eric J.; Kern, Brian; Balasubramanian, Kunjithapatham

    2013-01-01

    Using NASA's High Contrast Imaging Testbed (HCIT) at the Jet Propulsion Laboratory, we have experimentally investigated the sensitivity of dark hole contrast in a Lyot coronagraph for the following factors: 1) Lateral and longitudinal translation of an occulting mask; 2) An opaque spot on the occulting mask; 3) Sizes of the controlled dark hole area. Also, we compared the measured results with simulations obtained using both MACOS (Modeling and Analysis for Controlled Optical Systems) and PROPER optical analysis programs with full three-dimensional near-field diffraction analysis to model HCIT's optical train and coronagraph.

  20. Super LOTIS a high sensitive optical counterpart search experiment

    SciTech Connect

    Park, H.S., Ables, E.; Band, D.L

    1997-11-17

    We are constructing a 0.6 meter telescope system to search for early time gamma-ray burst (GRB) optical counterparts. Super-LOTIS (Super-Livermore Optical Transient Imaging System) is an automated telescope system that has a 0.8 x 0.8{degree} field-of-view, is sensitive to M{sub v} {approximately} 19 and responds to a burst trigger within 5 min. This telescope will record images of the gamma-ray burst coordinates that is given by the GCN (GRB Coordinate Network). A measurement of GRB light curves at early times will greatly enhance our understanding of GRB physics.

  1. Chemical and biological consequences of using carbon dioxide versus acid additions in ocean acidification experiments

    USGS Publications Warehouse

    Yates, Kimberly K.; DuFore, Christopher M.; Robbins, Lisa L.

    2013-01-01

    Use of different approaches for manipulating seawater chemistry during ocean acidification experiments has confounded comparison of results from various experimental studies. Some of these discrepancies have been attributed to whether addition of acid (such as hydrochloric acid, HCl) or carbon dioxide (CO2) gas has been used to adjust carbonate system parameters. Experimental simulations of carbonate system parameter scenarios for the years 1766, 2007, and 2100 were performed using the carbonate speciation program CO2SYS to demonstrate the variation in seawater chemistry that can result from use of these approaches. Results showed that carbonate system parameters were 3 percent and 8 percent lower than target values in closed-system acid additions, and 1 percent and 5 percent higher in closed-system CO2 additions for the 2007 and 2100 simulations, respectively. Open-system simulations showed that carbonate system parameters can deviate by up to 52 percent to 70 percent from target values in both acid addition and CO2 addition experiments. Results from simulations for the year 2100 were applied to empirically derived equations that relate biogenic calcification to carbonate system parameters for calcifying marine organisms including coccolithophores, corals, and foraminifera. Calculated calcification rates for coccolithophores, corals, and foraminifera differed from rates at target conditions by 0.5 percent to 2.5 percent in closed-system CO2 gas additions, from 0.8 percent to 15 percent in the closed-system acid additions, from 4.8 percent to 94 percent in open-system acid additions, and from 7 percent to 142 percent in open-system CO2 additions.

  2. Additive Routes to Action Learning: Layering Experience Shapes Engagement of the Action Observation Network

    PubMed Central

    Kirsch, Louise P.; Cross, Emily S.

    2015-01-01

    The way in which we perceive others in action is biased by one's prior experience with an observed action. For example, we can have auditory, visual, or motor experience with actions we observe others perform. How action experience via 1, 2, or all 3 of these modalities shapes action perception remains unclear. Here, we combine pre- and post-training functional magnetic resonance imaging measures with a dance training manipulation to address how building experience (from auditory to audiovisual to audiovisual plus motor) with a complex action shapes subsequent action perception. Results indicate that layering experience across these 3 modalities activates a number of sensorimotor cortical regions associated with the action observation network (AON) in such a way that the more modalities through which one experiences an action, the greater the response is within these AON regions during action perception. Moreover, a correlation between left premotor activity and participants' scores for reproducing an action suggests that the better an observer can perform an observed action, the stronger the neural response is. The findings suggest that the number of modalities through which an observer experiences an action impacts AON activity additively, and that premotor cortical activity might serve as an index of embodiment during action observation. PMID:26209850

  3. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy. PMID:27424134

  4. Comprehensive mechanisms for combustion chemistry: Experiment, modeling, and sensitivity analysis

    SciTech Connect

    Dryer, F.L.; Yetter, R.A.

    1993-12-01

    This research program is an integrated experimental/numerical effort to study pyrolysis and oxidation reactions and mechanisms for small-molecule hydrocarbon structures under conditions representative of combustion environments. The experimental aspects of the work are conducted in large diameter flow reactors, at pressures from one to twenty atmospheres, temperatures from 550 K to 1200 K, and with observed reaction times from 10{sup {minus}2} to 5 seconds. Gas sampling of stable reactant, intermediate, and product species concentrations provides not only substantial definition of the phenomenology of reaction mechanisms, but a significantly constrained set of kinetic information with negligible diffusive coupling. Analytical techniques used for detecting hydrocarbons and carbon oxides include gas chromatography (GC), and gas infrared (NDIR) and FTIR methods are utilized for continuous on-line sample detection of light absorption measurements of OH have also been performed in an atmospheric pressure flow reactor (APFR), and a variable pressure flow (VPFR) reactor is presently being instrumented to perform optical measurements of radicals and highly reactive molecular intermediates. The numerical aspects of the work utilize zero and one-dimensional pre-mixed, detailed kinetic studies, including path, elemental gradient sensitivity, and feature sensitivity analyses. The program emphasizes the use of hierarchical mechanistic construction to understand and develop detailed kinetic mechanisms. Numerical studies are utilized for guiding experimental parameter selections, for interpreting observations, for extending the predictive range of mechanism constructs, and to study the effects of diffusive transport coupling on reaction behavior in flames. Modeling using well defined and validated mechanisms for the CO/H{sub 2}/oxidant systems.

  5. Enhanced photovoltaic properties of modified redox electrolyte in dye-sensitized solar cells using tributyl phosphate as additive

    NASA Astrophysics Data System (ADS)

    Afrooz, Malihe; Dehghani, Hossein

    2014-09-01

    In this study, we report the influence of a phosphate additive on the performance of dye-sensitized solar cells (DSSCs) based on 2-cyano-3-(4-(diphenylamino)phenyl)acrylic acid (TPA) as sensitizer. The DSSCs are fabricated by incorporating tributyl phosphate (TBPP) as an additive in the electrolyte and is attained an efficiency of about 3.03% under standard air mass 1.5 global (AM 1.5G) simulated sunlight, corresponding to 35% efficiency increment compare to the standard liquid electrolyte. An improvement in both open circuit voltage (Voc) and short circuit current (Jsc) obtains by adjusting the concentration of TBPP in the electrolyte, which attributes to enlarge energy difference between the Fermi level (EF) of TiO2 and the redox potential of electrolyte and suppression of charge recombination from the conduction band (CB) of TiO2 to the oxidized ions in the redox electrolyte. Electrochemical impedance analyses (EIS) reveals a dramatic increase in charge transfer resistance at the dyed-TiO2/electrolyte interface and the electron density in the CB of TiO2 that the more prominent photoelectric conversion efficiency (η) improvement with TBPP additive results by the efficient inhibition of recombination processes. This striking result leads to use a family of electron donor groups in many compounds as highly efficient additive.

  6. An additional condition for Bell experiments for accepting local realistic theories

    NASA Astrophysics Data System (ADS)

    Nagata, Koji; Nakamura, Tadao

    2013-12-01

    We assume that one source of two uncorrelated spin-carrying particles emits them in a state, which can be described as a spin-1/2 bipartite pure uncorrelated state. We consider a Bell-Clauser-Horne-Shimony-Holt (Bell-CHSH) experiment with two-orthogonal-settings. We propose an additional condition for the state to be reproducible by the property of local realistic theories. We use the proposed measurement theory in order to construct the additional condition (Nagata and Nakamura in Int J Theor Phys 49:162, 2010). The condition is that local measurement outcome is . Otherwise, such an experiment does not allow for the existence of local realistic theories even in the situation that all Bell-CHSH inequalities hold. Also we derive new set of Bell inequalities when local measurement outcome is.

  7. Assessing model sensitivity and uncertainty across multiple Free-Air CO2 Enrichment experiments.

    NASA Astrophysics Data System (ADS)

    Cowdery, E.; Dietze, M.

    2015-12-01

    As atmospheric levels of carbon dioxide levels continue to increase, it is critical that terrestrial ecosystem models can accurately predict ecological responses to the changing environment. Current predictions of net primary productivity (NPP) in response to elevated atmospheric CO2 concentrations are highly variable and contain a considerable amount of uncertainty. It is necessary that we understand which factors are driving this uncertainty. The Free-Air CO2 Enrichment (FACE) experiments have equipped us with a rich data source that can be used to calibrate and validate these model predictions. To identify and evaluate the assumptions causing inter-model differences we performed model sensitivity and uncertainty analysis across ambient and elevated CO2 treatments using the Data Assimilation Linked Ecosystem Carbon (DALEC) model and the Ecosystem Demography Model (ED2), two process-based models ranging from low to high complexity respectively. These modeled process responses were compared to experimental data from the Kennedy Space Center Open Top Chamber Experiment, the Nevada Desert Free Air CO2 Enrichment Facility, the Rhinelander FACE experiment, the Wyoming Prairie Heating and CO2 Enrichment Experiment, the Duke Forest Face experiment and the Oak Ridge Experiment on CO2 Enrichment. By leveraging data access proxy and data tilling services provided by the BrownDog data curation project alongside analysis modules available in the Predictive Ecosystem Analyzer (PEcAn), we produced automated, repeatable benchmarking workflows that are generalized to incorporate different sites and ecological models. Combining the observed patterns of uncertainty between the two models with results of the recent FACE-model data synthesis project (FACE-MDS) can help identify which processes need further study and additional data constraints. These findings can be used to inform future experimental design and in turn can provide informative starting point for data assimilation.

  8. Influence of Si Addition on Quenching Sensitivity and Formation of Nano-Precipitate in Al-Mg-Si Alloys.

    PubMed

    Kim, JaeHwang; Hayashi, Minoru; Kobayashi, Equo; Sato, Tatsuo

    2016-02-01

    The age-hardening is enhanced with the high cooling rate since more vacancies are formed during quenching, whereas the stable beta phase is formed with the slow cooling rate just after solid solution treatment resulting in lower increase of hardness during aging. Meanwhile, the nanoclusters are formed during natural aging in Al-Mg-Si alloys. The formation of nanoclusters is enhanced with increasing the Si amount. High quench sensitivity based on mechanical property changes was confirmed with increasing the Si amount. Moreover, the nano-size beta" phase, main hardening phase, is more formed by the Si addition resulting in enhancement of the age-hardening. The quench sensitivity and the formation behavior of precipitates are discussed based on the age-hardening phenomena. PMID:27433677

  9. Stories from the trenches: Experiences of Alberta pharmacists in obtaining additional prescribing authority

    PubMed Central

    Charrois, Theresa; Rosenthal, Meagen; Tsuyuki, Ross T.

    2012-01-01

    Background: Pharmacists in Alberta can apply to the Alberta College of Pharmacists in order to obtain the designation of additional prescriber. This designation uniquely allows them to initiate therapy, in addition to other medication-related activities. Our objective was to examine specific experiences of pharmacists regarding the decision to apply and the application itself, and use this information to help inform other pharmacists who are considering additional prescribing. Methods: All pharmacists involved in a randomized, controlled trial being conducted in rural Alberta who had received their additional prescribing authorization (APA) were invited to participate. Pharmacists were contacted via e-mail and asked to respond to questions regarding their experiences in applying for APA. Responses were analyzed using content analysis and the identites of all respondents were kept anonymous. Results: Fourteen pharmacists were invited to participate. Review and examination of the responses revealed 3 main themes: motivation, hurdles and outcomes. Motivation can be understood as the reasons why they applied for their APA. Hurdles include any problems encountered of a personal, environmental or professional nature. Outcomes refer to how this designation has changed their practice. Discussion: Pharmacists had to address many factors that were unexpected during the application process; however, the eventual outcome of obtaining APA was deemed beneficial, both professionally and with regard to patient care. Conclusion: The information shared from these pharmacists will help other pharmacists, regardless of jurisdiction, overcome some of the challenges associated with obtaining advanced prescribing privileges. PMID:23509485

  10. Metacognitive sensitivity of subjective reports of decisional confidence and visual experience.

    PubMed

    Rausch, Manuel; Müller, Hermann J; Zehetleitner, Michael

    2015-09-01

    Previous studies provided contradicting results regarding metacognitive sensitivity estimated from subjective reports of confidence in comparison to subjective reports of visual experience. We investigated whether this effect of content of subjective reports is influenced by the statistical method to quantify metacognitive sensitivity. Comparing logistic regression and meta-d in a masked orientation task, a masked shape task, and a random-dot motion task, we observed metacognitive sensitivity of reports regarding decisional confidence was greater than of reports about visual experience irrespective of mathematical procedures. However, the relationship between subjective reports and the logistic transform of accuracy was often not linear, implying that logistic regression is not a consistent measure of metacognitive sensitivity. We argue that a science of consciousness would benefit from the assessment of both visual experience and decisional confidence, and recommend meta-d as measure of metacognitive sensitivity for future studies. PMID:25758187

  11. Sensitivity improvements to the YbF electron electric dipole moment experiment

    NASA Astrophysics Data System (ADS)

    Rabey, Isabel; Devlin, Jack; Sauer, Ben; Hudson, Jony; Tarbutt, Mike; Hinds, Ed

    The electron is predicted to have a small electric dipole moment (EDM). The size of this fundamental property is intimately connected to the breaking of time reversal symmetry (T) in nature. The Standard Model, which does include a small amount of T asymmetry, predicts the EDM to be too small to ever detect at de<10-38 e.cm. However, many extensions of the Standard Model that suggest additional T-violation predict the electron's EDM to be within a measurable regime of both current and proposed experiments. This talk describes our YbF electron EDM experiment and introduces some of the technical improvements made to our machine since the last measurement. We have increased the statistical sensitivity of our interferometer by increasing the number of YbF molecules that participate in the experiment and by increasing their detection probability. We demonstrate several hardware developments that combine laser, microwave and rf fields which, when applied to YbF, can pump six times more population into the initial measurement state. In the detection region we have used techniques developed for molecular laser cooling, including resonant polarisation modulation, to dramatically increase the number of scattered photons by a factor of 10. Combining all improvements, the statistical uncertainty of our measurement is expected to be reduced by a factor of ninety, allowing us to search for physics beyond the Standard Model and below the recent upper limit of de<8.9x10-29 e.cm.

  12. Normalized sensitivities and parameter identifiability of in situ diffusion experiments on Callovo-Oxfordian clay at Bure site

    SciTech Connect

    Samper, J.; Dewonck, S.; Zheng, L.; Yang, Q.; Naves, A.

    2009-10-01

    , gap and EdZ. Estimates of the effective diffusion coefficient and the porosity of clay are highly correlated, indicating that these parameters cannot be estimated simultaneously. Accurate estimation of D{sub e} and porosities of clay and EdZ is only possible when the standard deviation of random noise is less than 0.01. Small errors in the volume of the circulation system do not affect clay parameter estimates. Normalized sensitivities as well as the identifiability analysis of synthetic experiments have provided additional insight on inverse estimation of in situ diffusion experiments and will be of great benefit for the interpretation of real DIR in situ diffusion experiments.

  13. High spatial resolution two-dimensional position sensitive detector for the performance of coincidence experiments

    SciTech Connect

    Ceolin, D.; Chaplier, G.; Lemonnier, M.; Garcia, G.A.; Miron, C.; Nahon, L.; Simon, M.; Leclercq, N.; Morin, P.

    2005-04-01

    A position sensitive detector (PSD) adapted to the technical and mechanical specifications of our angle and energy resolved electron-ion(s) coincidence experiments is described in this article. The device, whose principle is very similar to the one detailed by J. H. D. Eland [Meas. Sci. Technol. 5, 1501 (1994)], is composed by a set of microchannel plates and a delay line anode. The originality comes from the addition in front of the encoding surface of a ceramic disk covered by a resistive surface. The capacitive coupling between the anode and the resistive plane has the double advantage of eliminating the spatial modulations due to the lattice of the anode and also of sensitizing a greater number of electrodes, increasing thus considerably the accuracy of the position measurements. The tests carried out with a time to digital conversion module of 250 ps resolution showed that a spatial resolution better than 50 {mu}m and a dead time of 160 ns can be achieved. Typical images obtained with the help of the EPICEA and DELICIOUS coincidence setups are also shown.

  14. Variable Temperature Stress in the Nematode Caenorhabditis elegans (Maupas) and Its Implications for Sensitivity to an Additional Chemical Stressor

    PubMed Central

    Svendsen, Claus; Spurgeon, David J.

    2016-01-01

    A wealth of studies has investigated how chemical sensitivity is affected by temperature, however, almost always under different constant rather than more realistic fluctuating regimes. Here we compared how the nematode Caenorhabditis elegans responds to copper at constant temperatures (8–24°C) and under fluctuation conditions of low (±4°C) and high (±8°C) amplitude (averages of 12, 16, 20°C and 16°C respectively). The DEBkiss model was used to interpret effects on energy budgets. Increasing constant temperature from 12–24°C reduced time to first egg, life-span and population growth rates consistent with temperature driven metabolic rate change. Responses at 8°C did not, however, accord with this pattern (including a deviation from the Temperature Size Rule), identifying a cold stress effect. High amplitude variation and low amplitude variation around a mean temperature of 12°C impacted reproduction and body size compared to nematodes kept at the matching average constant temperatures. Copper exposure affected reproduction, body size and life-span and consequently population growth. Sensitivity to copper (EC50 values), was similar at intermediate temperatures (12, 16, 20°C) and higher at 24°C and especially the innately stressful 8°C condition. Temperature variation did not increase copper sensitivity. Indeed under variable conditions including time at the stressful 8°C condition, sensitivity was reduced. DEBkiss identified increased maintenance costs and increased assimilation as possible mechanisms for cold and higher copper concentration effects. Model analysis of combined variable temperature effects, however, demonstrated no additional joint stressor response. Hence, concerns that exposure to temperature fluctuations may sensitise species to co-stressor effects seem unfounded in this case. PMID:26784453

  15. Variable Temperature Stress in the Nematode Caenorhabditis elegans (Maupas) and Its Implications for Sensitivity to an Additional Chemical Stressor.

    PubMed

    Cedergreen, Nina; Nørhave, Nils Jakob; Svendsen, Claus; Spurgeon, David J

    2016-01-01

    A wealth of studies has investigated how chemical sensitivity is affected by temperature, however, almost always under different constant rather than more realistic fluctuating regimes. Here we compared how the nematode Caenorhabditis elegans responds to copper at constant temperatures (8-24°C) and under fluctuation conditions of low (±4°C) and high (±8°C) amplitude (averages of 12, 16, 20°C and 16°C respectively). The DEBkiss model was used to interpret effects on energy budgets. Increasing constant temperature from 12-24°C reduced time to first egg, life-span and population growth rates consistent with temperature driven metabolic rate change. Responses at 8°C did not, however, accord with this pattern (including a deviation from the Temperature Size Rule), identifying a cold stress effect. High amplitude variation and low amplitude variation around a mean temperature of 12°C impacted reproduction and body size compared to nematodes kept at the matching average constant temperatures. Copper exposure affected reproduction, body size and life-span and consequently population growth. Sensitivity to copper (EC50 values), was similar at intermediate temperatures (12, 16, 20°C) and higher at 24°C and especially the innately stressful 8°C condition. Temperature variation did not increase copper sensitivity. Indeed under variable conditions including time at the stressful 8°C condition, sensitivity was reduced. DEBkiss identified increased maintenance costs and increased assimilation as possible mechanisms for cold and higher copper concentration effects. Model analysis of combined variable temperature effects, however, demonstrated no additional joint stressor response. Hence, concerns that exposure to temperature fluctuations may sensitise species to co-stressor effects seem unfounded in this case. PMID:26784453

  16. Spinel dissolution via addition of glass forming chemicals. Results of preliminary experiments

    SciTech Connect

    Fox, K. M.; Johnson, F. C.

    2015-11-01

    Increased loading of high level waste in glass can lead to crystallization within the glass. Some crystalline species, such as spinel, have no practical impact on the chemical durability of the glass, and therefore may be acceptable from both a processing and a product performance standpoint. In order to operate a melter with a controlled amount of crystallization, options must be developed for remediating an unacceptable accumulation of crystals. This report describes preliminary experiments designed to evaluate the ability to dissolve spinel crystals in simulated waste glass melts via the addition of glass forming chemicals (GFCs).

  17. Sensitivity Experiments on the Impact of Vb-Cyclones to Ocean Temperature and Soil Moisture Changes

    NASA Astrophysics Data System (ADS)

    Messmer, Martina; José Gómez-Navarro, Juan; Raible, Christoph C.

    2016-04-01

    Cyclones developing over the western Mediterranean and move northeastward are a major source of extreme weather and responsible for heavy precipitation over Central Europe. Gaining insight into these processes is crucial to improve the projection of changes in frequency and severity of these so-called Vb-cyclones under future climate change scenarios. This study explores the impact of climate change on Vb-events through a number of idealized sensitivity experiments that assess the role of the sea surface temperature (SST) and soil moisture and their contribution to the moisture content in the atmosphere in recent Vb-events. To achieve this task, we use the Weather Research and Forecasting model (WRF) to dynamically downscale the ERA Interim reanalysis, simulating five prominent Vb-events that led to extreme precipitation in Central Europe. WRF allows simulating a physical consistent response of Vb-cyclones to different SSTs and soil water volumes. The changes in SSTs are designed to follow the expected temperature changes in a future climate scenario. Additionally the corresponding uncertainty in such projections is considered. Results indicate that although an increase of the Mediterranean SSTs leads to increased precipitation over Central Europe, e.g. 136% greater precipitation in the +5 K experiment compared to the control simulation, a change in the high-impact region of Vb-events at the northern side of the Alps is not found. This counter-intuitive behavior seems to be related to the increase of atmospheric instability over the artificially heated SSTs. Thereby, precipitation notably increases over the east Adriatic coast in response to warmer SSTs, which corresponds to the first location where the air is lifted. However, Vb-events become less destructive in their high-impact region, due to high loss of atmospheric water. Further experiments demonstrate that changing the SSTs of the Atlantic invokes almost no reaction (around 1% change) with respect to

  18. Active Drumming Experience Increases Infants’ Sensitivity to Audiovisual Synchrony during Observed Drumming Actions

    PubMed Central

    Timmers, Renee; Hunnius, Sabine

    2015-01-01

    In the current study, we examined the role of active experience on sensitivity to multisensory synchrony in six-month-old infants in a musical context. In the first of two experiments, we trained infants to produce a novel multimodal effect (i.e., a drum beat) and assessed the effects of this training, relative to no training, on their later perception of the synchrony between audio and visual presentation of the drumming action. In a second experiment, we then contrasted this active experience with the observation of drumming in order to test whether observation of the audiovisual effect was as effective for sensitivity to multimodal synchrony as active experience. Our results indicated that active experience provided a unique benefit above and beyond observational experience, providing insights on the embodied roots of (early) music perception and cognition. PMID:26111226

  19. Seasonality, Rather than Nutrient Addition or Vegetation Types, Influenced Short-Term Temperature Sensitivity of Soil Organic Carbon Decomposition.

    PubMed

    Qian, Yu-Qi; He, Feng-Peng; Wang, Wei

    2016-01-01

    The response of microbial respiration from soil organic carbon (SOC) decomposition to environmental changes plays a key role in predicting future trends of atmospheric CO2 concentration. However, it remains uncertain whether there is a universal trend in the response of microbial respiration to increased temperature and nutrient addition among different vegetation types. In this study, soils were sampled in spring, summer, autumn and winter from five dominant vegetation types, including pine, larch and birch forest, shrubland, and grassland, in the Saihanba area of northern China. Soil samples from each season were incubated at 1, 10, and 20°C for 5 to 7 days. Nitrogen (N; 0.035 mM as NH4NO3) and phosphorus (P; 0.03 mM as P2O5) were added to soil samples, and the responses of soil microbial respiration to increased temperature and nutrient addition were determined. We found a universal trend that soil microbial respiration increased with increased temperature regardless of sampling season or vegetation type. The temperature sensitivity (indicated by Q10, the increase in respiration rate with a 10°C increase in temperature) of microbial respiration was higher in spring and autumn than in summer and winter, irrespective of vegetation type. The Q10 was significantly positively correlated with microbial biomass and the fungal: bacterial ratio. Microbial respiration (or Q10) did not significantly respond to N or P addition. Our results suggest that short-term nutrient input might not change the SOC decomposition rate or its temperature sensitivity, whereas increased temperature might significantly enhance SOC decomposition in spring and autumn, compared with winter and summer. PMID:27070782

  20. Seasonality, Rather than Nutrient Addition or Vegetation Types, Influenced Short-Term Temperature Sensitivity of Soil Organic Carbon Decomposition

    PubMed Central

    He, Feng-Peng; Wang, Wei

    2016-01-01

    The response of microbial respiration from soil organic carbon (SOC) decomposition to environmental changes plays a key role in predicting future trends of atmospheric CO2 concentration. However, it remains uncertain whether there is a universal trend in the response of microbial respiration to increased temperature and nutrient addition among different vegetation types. In this study, soils were sampled in spring, summer, autumn and winter from five dominant vegetation types, including pine, larch and birch forest, shrubland, and grassland, in the Saihanba area of northern China. Soil samples from each season were incubated at 1, 10, and 20°C for 5 to 7 days. Nitrogen (N; 0.035 mM as NH4NO3) and phosphorus (P; 0.03 mM as P2O5) were added to soil samples, and the responses of soil microbial respiration to increased temperature and nutrient addition were determined. We found a universal trend that soil microbial respiration increased with increased temperature regardless of sampling season or vegetation type. The temperature sensitivity (indicated by Q10, the increase in respiration rate with a 10°C increase in temperature) of microbial respiration was higher in spring and autumn than in summer and winter, irrespective of vegetation type. The Q10 was significantly positively correlated with microbial biomass and the fungal: bacterial ratio. Microbial respiration (or Q10) did not significantly respond to N or P addition. Our results suggest that short-term nutrient input might not change the SOC decomposition rate or its temperature sensitivity, whereas increased temperature might significantly enhance SOC decomposition in spring and autumn, compared with winter and summer. PMID:27070782

  1. Additional experiments relative to the shelf life of Li(Si)/FeS2 thermal batteries

    NASA Astrophysics Data System (ADS)

    Searcy, J. Q.; Armijo, J. R.

    1985-02-01

    A continuing effort to develop a new thermal battery technology based on the Li(Si)/FeS2 electrochemical couple is reported. The results relate to the long shelf life requirement for thermal batteries designed by Sandia, and include topics relevant to leakage through the hermetic seal and accelerated aging experiments with materials new to the technology. Conclusions relevant to leakage through the hermetic seal are that the maximum leak rate must not exceed 1.8 x 10(-7) w, where w is the grams of Li(Si) contained by a battery, and that a bomb type leak test can be designed that is adequate for most Li(Si)/FeS2 batteries. Conclusions relevant to long term compatibility of new materials include the following: nickel is not compatible with the iron disulfide in the cathode; the CaSi2 additive used to suppress the initial voltage transient does not react or degrade during accelerated aging experiments, but the use of that material can lead to an increase in the variability of the activated lives, especially for long life batteries; Grafoil current collectors used with the cathode do not degrade in accelerated aging experiments.

  2. Sensitivity of low energy neutrino experiments to physics beyond the standard model

    SciTech Connect

    Barranco, J.; Miranda, O. G.; Rashba, T. I.

    2007-10-01

    We study the sensitivity of future low energy neutrino experiments to extra neutral gauge bosons, leptoquarks, and R-parity breaking interactions. We focus on future proposals to measure coherent neutrino-nuclei scattering and neutrino-electron elastic scattering. We introduce a new comparative analysis between these experiments and show that in different types of new physics it is possible to obtain competitive bounds to those of present and future collider experiments. For the cases of leptoquarks and R-parity breaking interactions we found that the expected sensitivity for most of the future low energy experimental setups is better than the current constraints.

  3. Stress Sensitivity, Aberrant Salience, and Threat Anticipation in Early Psychosis: An Experience Sampling Study.

    PubMed

    Reininghaus, Ulrich; Kempton, Matthew J; Valmaggia, Lucia; Craig, Tom K J; Garety, Philippa; Onyejiaka, Adanna; Gayer-Anderson, Charlotte; So, Suzanne H; Hubbard, Kathryn; Beards, Stephanie; Dazzan, Paola; Pariante, Carmine; Mondelli, Valeria; Fisher, Helen L; Mills, John G; Viechtbauer, Wolfgang; McGuire, Philip; van Os, Jim; Murray, Robin M; Wykes, Til; Myin-Germeys, Inez; Morgan, Craig

    2016-05-01

    While contemporary models of psychosis have proposed a number of putative psychological mechanisms, how these impact on individuals to increase intensity of psychotic experiences in real life, outside the research laboratory, remains unclear. We aimed to investigate whether elevated stress sensitivity, experiences of aberrant novelty and salience, and enhanced anticipation of threat contribute to the development of psychotic experiences in daily life. We used the experience sampling method (ESM) to assess stress, negative affect, aberrant salience, threat anticipation, and psychotic experiences in 51 individuals with first-episode psychosis (FEP), 46 individuals with an at-risk mental state (ARMS) for psychosis, and 53 controls with no personal or family history of psychosis. Linear mixed models were used to account for the multilevel structure of ESM data. In all 3 groups, elevated stress sensitivity, aberrant salience, and enhanced threat anticipation were associated with an increased intensity of psychotic experiences. However, elevated sensitivity to minor stressful events (χ(2)= 6.3,P= 0.044), activities (χ(2)= 6.7,P= 0.036), and areas (χ(2)= 9.4,P= 0.009) and enhanced threat anticipation (χ(2)= 9.3,P= 0.009) were associated with more intense psychotic experiences in FEP individuals than controls. Sensitivity to outsider status (χ(2)= 5.7,P= 0.058) and aberrantly salient experiences (χ(2)= 12.3,P= 0.002) were more strongly associated with psychotic experiences in ARMS individuals than controls. Our findings suggest that stress sensitivity, aberrant salience, and threat anticipation are important psychological processes in the development of psychotic experiences in daily life in the early stages of the disorder. PMID:26834027

  4. Stress Sensitivity, Aberrant Salience, and Threat Anticipation in Early Psychosis: An Experience Sampling Study

    PubMed Central

    Reininghaus, Ulrich; Kempton, Matthew J.; Valmaggia, Lucia; Craig, Tom K. J.; Garety, Philippa; Onyejiaka, Adanna; Gayer-Anderson, Charlotte; So, Suzanne H.; Hubbard, Kathryn; Beards, Stephanie; Dazzan, Paola; Pariante, Carmine; Mondelli, Valeria; Fisher, Helen L.; Mills, John G.; Viechtbauer, Wolfgang; McGuire, Philip; van Os, Jim; Murray, Robin M.; Wykes, Til; Myin-Germeys, Inez; Morgan, Craig

    2016-01-01

    While contemporary models of psychosis have proposed a number of putative psychological mechanisms, how these impact on individuals to increase intensity of psychotic experiences in real life, outside the research laboratory, remains unclear. We aimed to investigate whether elevated stress sensitivity, experiences of aberrant novelty and salience, and enhanced anticipation of threat contribute to the development of psychotic experiences in daily life. We used the experience sampling method (ESM) to assess stress, negative affect, aberrant salience, threat anticipation, and psychotic experiences in 51 individuals with first-episode psychosis (FEP), 46 individuals with an at-risk mental state (ARMS) for psychosis, and 53 controls with no personal or family history of psychosis. Linear mixed models were used to account for the multilevel structure of ESM data. In all 3 groups, elevated stress sensitivity, aberrant salience, and enhanced threat anticipation were associated with an increased intensity of psychotic experiences. However, elevated sensitivity to minor stressful events (χ2 = 6.3, P = 0.044), activities (χ2 = 6.7, P = 0.036), and areas (χ2 = 9.4, P = 0.009) and enhanced threat anticipation (χ2 = 9.3, P = 0.009) were associated with more intense psychotic experiences in FEP individuals than controls. Sensitivity to outsider status (χ2 = 5.7, P = 0.058) and aberrantly salient experiences (χ2 = 12.3, P = 0.002) were more strongly associated with psychotic experiences in ARMS individuals than controls. Our findings suggest that stress sensitivity, aberrant salience, and threat anticipation are important psychological processes in the development of psychotic experiences in daily life in the early stages of the disorder. PMID:26834027

  5. Vibration isolation technology: Sensitivity of selected classes of experiments to residual accelerations

    NASA Technical Reports Server (NTRS)

    Alexander, J. Iwan D.

    1990-01-01

    The solution was sought of a 2-D axisymmetric moving boundary problem for the sensitivity of isothermal and nonisothermal liquid columns and the sensitivity of thermo-capillary flows to buoyancy driven convection caused by residual accelerations. The sensitivity of a variety of space experiments to residual accelerations are examined. In all the cases discussed, the sensitivity is related to the dynamic response of a fluid. In some cases the sensitivity can be defined by the magnitude of the response of the velocity field. This response may involve motion of the fluid associated with internal density gradients, or the motion of a free liquid surface. For fluids with internal density gradients, the type of acceleration to which the experiment is sensitive will depend on whether buoyancy driven convection must be small in comparison to other types of fluid motion (such as thermocapillary flow), or fluid motion must be suppressed or eliminated (such as in diffusion studies, or directional solidification experiments). The effect of the velocity on the composition and temperature field must be considered, particularly in the vicinity of the melt crystal interface. As far as the response to transient disturbances is concerned the sensitivity is determined by both the magnitude and frequency the acceleration and the characteristic momentum and solute diffusion times.

  6. Modification of sandy soil hydrophysical environment through bagasse additive under laboratory experiment

    NASA Astrophysics Data System (ADS)

    Abd El-Halim, A. A.; Kumlung, Arunsiri

    2015-01-01

    Until now sandy soils can be considered as one roup having common hydrophysical problems. Therefore, a laboratory experiment was conducted to evaluate the influence of bagasse as an amendment to improve hydrophysical properties of sandy soil, through the determination of bulk density, aggregatesize distribution, total porosity, hydraulic conductivity, pore-space structure and water retention. To fulfil this objective, sandy soils were amended with bagasse at the rate of 0, 0.5, 1, 2, 3 and 4% on the dry weight basis. The study results demonstrated that the addition of bagasse to sandy soils in between 3 to 4% on the dry weight basis led to a significant decrease in bulk density, hydraulic conductivity, and rapid-drainable pores, and increase in the total porosity, water-holding pores, fine capillary pores, water retained at field capacity, wilting point, and soil available water as compared with the control treatment

  7. Additional experiments on flowability improvements of aviation fuels at low temperatures, volume 2

    NASA Technical Reports Server (NTRS)

    Stockemer, F. J.; Deane, R. L.

    1982-01-01

    An investigation was performed to study flow improver additives and scale-model fuel heating systems for use with aviation hydrocarbon fuel at low temperatures. Test were performed in a facility that simulated the heat transfer and temperature profiles anticipated in wing fuel tanks during flight of long-range commercial aircraft. The results are presented of experiments conducted in a test tank simulating a section of an outer wing integral fuel tank approximately full-scale in height, chilled through heat exchange panels bonded to the upper and lower horizontal surfaces. A separate system heated lubricating oil externally by a controllable electric heater, to transfer heat to fuel pumped from the test tank through an oil-to-fuel heat exchanger, and to recirculate the heated fuel back to the test tank.

  8. Redox-sensitivity and mobility of selected pharmaceutical compounds in a laboratory column experiment

    NASA Astrophysics Data System (ADS)

    Banzhaf, S.; Nödler, K.; Licha, T.; Krein, A.; Scheytt, T.

    2012-04-01

    Laboratory column experiments are suitable to investigate the sediment water interaction and to study the transport behaviour of solutes. Processes like retardation and degradation can be identified and quantified. The conducted experiment, which is closely connected to a field study in Luxembourg, investigated the transport behaviour of selected pharmaceutical compounds and their redox-dependent metabolism under water saturated conditions. Fine-grained natural sediment with a low hydraulic conductivity from a study site in Luxembourg was filled into the column. The water for the experiment was taken from a small stream at the same fieldsite. It was spiked with four pharmaceutical compounds (carbamazepine, diclofenac, ibuprofen, sulfamethoxazole) with concentrations between 170 and 300 ng/L for the different substances. The chosen pharmaceuticals were also detected in groundwater and surface water samples at the study site and used to qualify exchange/mixing of surface water and groundwater (BANZHAF et al., 2011). As some of the substances are known to exhibit redox-sensitive degradation, the redox-conditions were systematically varied throughout the experiment. This was realised by adding nitrate at the inflow of the column. During the experiment, which lasted for 2.5 months, four different nitrate concentrations (20-130 mg/L) were applied, beginning with the highest concentration. During the experiment water from the reservoir tank was sampled daily in order to detect a potential degradation of the pharmaceutical compounds before they enter the column. The effluent water was sampled every three hours to guarantee a maximum resolution for the analysis of the pharmaceuticals where necessary. In addition, major ions were analysed in the influent and effluent samples. Throughout the experiment physicochemical parameters (oxidation reduction potential (ORP), dissolved oxygen, electrical conductivity, and pH-value) were measured and logged at the outflow of the column

  9. Urea as a long-term stable alternative to guanidium thiocyanate additive in dye-sensitized solar cell

    NASA Astrophysics Data System (ADS)

    Kim, Mi-Jeong; Park, Nam-Gyu

    2012-09-01

    Photovoltaic performance of 0.05 M urea-contained redox electrolyte is compared to that of 0.05 M guanidinium thiocyanate (GSCN)-contained one in dye-sensitized solar cell. No significant difference in the initial photovoltaic performance is observed, which means that the role of urea additive is similar to that of GSCN. Initial solar-to-electrical conversion efficiency of the device containing GSCN shows 7% that is diminished to 5.8% after 40 days, whereas the device containing urea exhibits stable photovoltaic performance showing that initial efficiency of 7.2% is almost remained unchanged after 40 days (7.1%). The lowered efficiency of the GSCN-contained device is mainly due to the decreased photocurrent density, which is ascribed to the formation of needle-shaped crystals on TiO2 layer. Infrared spectroscopic study confirms that the crystals are dye analogue, which is indicative of dye desorption in the presence of GSCN. On the other hand, no crystals are formed in the urea-contained electrolyte, which implies that dye desorption is negligible. Urea additive is thus found to be less reactive in dye desorption than GSCN, leading to long-term stability.

  10. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis.

    PubMed

    Hensen, B; Kalb, N; Blok, M S; Dréau, A E; Reiserer, A; Vermeulen, R F L; Schouten, R N; Markham, M; Twitchen, D J; Goodenough, K; Elkouss, D; Wehner, S; Taminiau, T H; Hanson, R

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682-686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  11. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis

    PubMed Central

    Hensen, B.; Kalb, N.; Blok, M. S.; Dréau, A. E.; Reiserer, A.; Vermeulen, R. F. L.; Schouten, R. N.; Markham, M.; Twitchen, D. J.; Goodenough, K.; Elkouss, D.; Wehner, S.; Taminiau, T. H.; Hanson, R.

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682–686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  12. Augmenting a Waste Glass Mixture Experiment Study with Additional Glass Components and Experimental Runs

    SciTech Connect

    Piepel, Gregory F. ); Cooley, Scott K. ); Peeler, David K.; Vienna, John D. ); Edwards, Tommy B.

    2002-01-01

    A glass composition variation study (CVS) for high-level waste (HLW) stored in Idaho is being statistically designed and performed in phases over several years. The purpose of the CVS is to investigate and model how HLW-glass properties depend on glass composition. The resulting glass property-composition models will be used to develop desirable glass formulations and for other purposes. Phases 1 and 2 of the CVS have been completed and are briefly described. This paper focuses on the CVS Phase 3 experimental design, which was chosen to augment the Phase 1 and 2 data with additional data points, as well as to account for additional glass components not studied in Phases 1 and/or 2. In total, 16 glass components were varied in the Phase 3 experimental design. The paper describes how these Phase 3 experimental design augmentation challenges were addressed using the previous data, preliminary property-composition models, and statistical mixture experiment and optimal experimental design methods and software.

  13. The additive effect on suicidality of family history of suicidal behavior and early traumatic experiences.

    PubMed

    Lopez-Castroman, J; Guillaume, S; Olié, E; Jaussent, I; Baca-García, E; Courtet, P

    2015-01-01

    Family history of suicidal behavior and personal history of childhood abuse are reported risk factors for suicide attempts and suicide completion. We aim to quantify the additive effect of family history of suicidal behavior and different subtypes of childhood abuse on suicidal behavior. We examined a sample of 496 suicide attempters, comparing individuals with family history of suicidal behavior and personal history of childhood (physical or sexual) abuse, individuals with family history of suicidal behavior only, individuals with history of early traumatic experiences only, and individuals with none of these two risk factors with regards to suicidal features. An additive effect was found for the age at the first attempt in suicide attempters with both family history of suicidal behavior and either physical or sexual abuse. No significant interactions were found between family history of suicidal behavior and childhood trauma in relation to any characteristics of suicidal behavior. Subjects presenting family history of suicidal behavior and childhood abuse attempt suicide earlier in life than subjects with just one or none of them, particularly if they were sexually abused. Other suicidality indexes were only partially or not associated with this combination of risk factors. A careful assessment of patients with both family history of suicidal behavior and childhood abuse could help to prevent future suicide attempts, particularly in young people. PMID:25259671

  14. Vibration isolation technology: Sensitivity of selected classes of space experiments to residual accelerations

    NASA Technical Reports Server (NTRS)

    Alexander, J. Iwan D.; Zhang, Y. Q.; Adebiyi, Adebimpe

    1989-01-01

    Progress performed on each task is described. Order of magnitude analyses related to liquid zone sensitivity and thermo-capillary flow sensitivity are covered. Progress with numerical models of the sensitivity of isothermal liquid zones is described. Progress towards a numerical model of coupled buoyancy-driven and thermo-capillary convection experiments is also described. Interaction with NASA personnel is covered. Results to date are summarized and they are discussed in terms of the predicted space station acceleration environment. Work planned for the second year is also discussed.

  15. Power spectrum sensitivity of raster-scanned CMB experiments in the presence of 1/f noise

    SciTech Connect

    Crawford, Tom

    2007-09-15

    We investigate the effects of 1/f noise on the ability of a particular class of cosmic microwave background experiments to measure the angular power spectrum of temperature anisotropy. We concentrate on experiments that operate primarily in raster-scan mode and develop formalism that allows us to calculate analytically the effect of 1/f noise on power-spectrum sensitivity for this class of experiments and determine the benefits of raster-scanning at different angles relative to the sky field versus scanning at only a single angle (cross-linking versus not cross-linking). We find that the sensitivity of such experiments in the presence of 1/f noise is not significantly degraded at moderate spatial scales (l{approx}100) for reasonable values of scan speed and 1/f knee. We further find that the difference between cross-linked and non-cross-linked experiments is small in all cases and that the non-cross-linked experiments are preferred from a raw sensitivity standpoint in the noise-dominated regime - i.e., in experiments in which the instrument noise is greater than the sample variance of the target power spectrum at the scales of interest. This analysis does not take into account systematic effects.

  16. Radon emanation chamber: High sensitivity measurements for the SuperNEMO experiment

    SciTech Connect

    Soulé, B.; Collaboration: SuperNEMO Collaboration; and others

    2013-08-08

    Radon is a well-known source of background in ββ0ν experiments due to the high Q{sub β} value of one of its daughter nucleus, {sup 214}Bi. The SuperNEMO collaboration requires a maximum radon contamination of 0.1 mBq/m{sup 3} inside its next-generation double beta decay detector. To reach such a low activity, a drastic screening process has been set for the selection of the detector's materials. In addition to a good radiopurity, a low emanation rate is required. To test this parameter, a Radon Emanation Setup is running at CENBG. It consists in a large emanation chamber connected to an electrostatic detector. By measuring large samples and having a low background level, this setup reaches a sensitivity of a few μ Bq. m{sup −2}. d{sup −1} and is able to qualify materials used in the construction of the SuperNEMO detector.

  17. Nonstandard interactions spoiling the C P violation sensitivity at DUNE and other long baseline experiments

    NASA Astrophysics Data System (ADS)

    Masud, Mehedi; Mehta, Poonam

    2016-07-01

    It is by now established that neutrino oscillations occur due to nonzero masses and parameters in the leptonic mixing matrix. The extraction of oscillation parameters may be complicated due to subleading effects such as nonstandard neutrino interactions and one needs to have a fresh look how a particular parameter value is inferred from experimental data. In the present work, we focus on an important parameter entering the oscillation framework-the leptonic C P -violating phase δ , about which we know very little. We demonstrate that the sensitivity to C P violation gets significantly impacted due to nonstandard neutrino interaction effects for the upcoming long baseline experiment, Deep Underground Neutrino Experiment. We also draw a comparison with the sensitivities of other ongoing neutrino beam experiments such as NO ν A and T2K as well as a future generation experiment, T2HK.

  18. Performance of high-resolution position-sensitive detectors developed for storage-ring decay experiments

    NASA Astrophysics Data System (ADS)

    Yamaguchi, T.; Suzaki, F.; Izumikawa, T.; Miyazawa, S.; Morimoto, K.; Suzuki, T.; Tokanai, F.; Furuki, H.; Ichihashi, N.; Ichikawa, C.; Kitagawa, A.; Kuboki, T.; Momota, S.; Nagae, D.; Nagashima, M.; Nakamura, Y.; Nishikiori, R.; Niwa, T.; Ohtsubo, T.; Ozawa, A.; Sato, K.; Sato, S.; Suzuki, S.

    2013-12-01

    As next generation spectroscopic tools, heavy-ion cooler storage rings will be a unique application of highly charged RI beam experiments. Decay spectroscopy of highly charged rare isotopes provides us important information relevant to the stellar conditions, such as for the s- and r-process nucleosynthesis. In-ring decay products of highly charged RI will be momentum-analyzed and reach a position-sensitive detector set-up located outside of the storage orbit. To realize such in-ring decay experiments, we have developed and tested two types of high-resolution position-sensitive detectors: silicon strips and scintillating fibers. The beam test experiments resulted in excellent position resolutions for both detectors, which will be available for future storage-ring experiments.

  19. Nano-morphology induced additional surface plasmon resonance enhancement of SERS sensitivity in Ag/GaN nanowall network

    NASA Astrophysics Data System (ADS)

    Sharvani, S.; Upadhayaya, Kishor; Kumari, Gayatri; Narayana, Chandrabhas; Shivaprasad, S. M.

    2015-11-01

    The GaN nanowall network, formed by opening the screw dislocations by kinetically controlled MBE growth, possesses a large surface and high conductivity. Sharp apexed nanowalls show higher surface electron concentration in the band-tail states, in comparison to blunt apexed nanowalls. Uncapped silver nanoparticles are vapor deposited on the blunt and sharp GaN nanowall networks to study the morphological dependence of band-edge plasmon-coupling. Surface enhanced Raman spectroscopy studies performed with a rhodamine 6G analyte on these two configurations clearly show that the sharp nanowall morphology with smaller Ag nanoparticles shows higher enhancement of the Raman signal. A very large enhancement factor of 2.8 × 107 and a very low limit of detection of 10-10 M is observed, which is attributed to the surface plasmon resonance owing to the high surface electron concentration on the GaN nanowall in addition to that of the Ag nanoparticles. The significantly higher sensitivity with same-sized Ag nanoparticles confirms the unconventional role of morphology-dependent surface charge carrier concentration of GaN nanowalls in the enhancement of Raman signals.

  20. Nano-morphology induced additional surface plasmon resonance enhancement of SERS sensitivity in Ag/GaN nanowall network.

    PubMed

    Sharvani, S; Upadhayaya, Kishor; Kumari, Gayatri; Narayana, Chandrabhas; Shivaprasad, S M

    2015-11-20

    The GaN nanowall network, formed by opening the screw dislocations by kinetically controlled MBE growth, possesses a large surface and high conductivity. Sharp apexed nanowalls show higher surface electron concentration in the band-tail states, in comparison to blunt apexed nanowalls. Uncapped silver nanoparticles are vapor deposited on the blunt and sharp GaN nanowall networks to study the morphological dependence of band-edge plasmon-coupling. Surface enhanced Raman spectroscopy studies performed with a rhodamine 6G analyte on these two configurations clearly show that the sharp nanowall morphology with smaller Ag nanoparticles shows higher enhancement of the Raman signal. A very large enhancement factor of 2.8 × 10(7) and a very low limit of detection of 10(-10) M is observed, which is attributed to the surface plasmon resonance owing to the high surface electron concentration on the GaN nanowall in addition to that of the Ag nanoparticles. The significantly higher sensitivity with same-sized Ag nanoparticles confirms the unconventional role of morphology-dependent surface charge carrier concentration of GaN nanowalls in the enhancement of Raman signals. PMID:26502004

  1. An experiment in software reliability: Additional analyses using data from automated replications

    NASA Technical Reports Server (NTRS)

    Dunham, Janet R.; Lauterbach, Linda A.

    1988-01-01

    A study undertaken to collect software error data of laboratory quality for use in the development of credible methods for predicting the reliability of software used in life-critical applications is summarized. The software error data reported were acquired through automated repetitive run testing of three independent implementations of a launch interceptor condition module of a radar tracking problem. The results are based on 100 test applications to accumulate a sufficient sample size for error rate estimation. The data collected is used to confirm the results of two Boeing studies reported in NASA-CR-165836 Software Reliability: Repetitive Run Experimentation and Modeling, and NASA-CR-172378 Software Reliability: Additional Investigations into Modeling With Replicated Experiments, respectively. That is, the results confirm the log-linear pattern of software error rates and reject the hypothesis of equal error rates per individual fault. This rejection casts doubt on the assumption that the program's failure rate is a constant multiple of the number of residual bugs; an assumption which underlies some of the current models of software reliability. data raises new questions concerning the phenomenon of interacting faults.

  2. Additions and Improvements to the FLASH Code for Simulating High Energy Density Physics Experiments

    NASA Astrophysics Data System (ADS)

    Lamb, D. Q.; Daley, C.; Dubey, A.; Fatenejad, M.; Flocke, N.; Graziani, C.; Lee, D.; Tzeferacos, P.; Weide, K.

    2015-11-01

    FLASH is an open source, finite-volume Eulerian, spatially adaptive radiation hydrodynamics and magnetohydrodynamics code that incorporates capabilities for a broad range of physical processes, performs well on a wide range of computer architectures, and has a broad user base. Extensive capabilities have been added to FLASH to make it an open toolset for the academic high energy density physics (HEDP) community. We summarize these capabilities, with particular emphasis on recent additions and improvements. These include advancements in the optical ray tracing laser package, with methods such as bi-cubic 2D and tri-cubic 3D interpolation of electron number density, adaptive stepping and 2nd-, 3rd-, and 4th-order Runge-Kutta integration methods. Moreover, we showcase the simulated magnetic field diagnostic capabilities of the code, including induction coils, Faraday rotation, and proton radiography. We also describe several collaborations with the National Laboratories and the academic community in which FLASH has been used to simulate HEDP experiments. This work was supported in part at the University of Chicago by the DOE NNSA ASC through the Argonne Institute for Computing in Science under field work proposal 57789; and the NSF under grant PHY-0903997.

  3. The skin sensitization potential of resorcinol: experience with the local lymph node assay.

    PubMed

    Basketter, David A; Sanders, David; Jowsey, Ian R

    2007-04-01

    Resorcinol is a simple aromatic chemical (1,3-benzenediol) that has found widespread use, particularly as a coupler in hair dyes. Clinical experience clearly shows that resorcinol is a (albeit uncommon) skin sensitizer. By contrast, predictive methods, both animal and human, have previously failed to identify resorcinol as such. Here, we describe the outcome of a recent local lymph node assay performed in accordance with Organisation for Economic Co-operation and Development guideline 429, which correctly identified resorcinol as a skin sensitizer. Clear evidence of a dose response was apparent, and an EC3 value of approximately 6% was calculated. This suggests that the skin-sensitizing potency of resorcinol is approximately 2 orders of magnitude lower than that of p-phenylenediamine but similar to that of hexyl cinnamic aldehyde. These data show the importance of adherence to test guidelines and aligns the clinical experience with resorcinol with that obtained in predictive animal methods. PMID:17343618

  4. The Role of Sensitizing Experiences in Music Performance Anxiety in Adolescent Musicians

    ERIC Educational Resources Information Center

    Osborne, Margaret S.; Kenny, Dianna T.

    2008-01-01

    Aversive performance incidents play a role in the development of some anxiety disorders. The role of sensitizing experiences in the development of music performance anxiety (MPA) in adolescent music students has not yet been explored. Two-hundred-and-ninety-eight music students were asked to provide written descriptions of their worst performance,…

  5. Sensory-processing sensitivity moderates the association between childhood experiences and adult life satisfaction

    PubMed Central

    Booth, Charlotte; Standage, Helen; Fox, Elaine

    2015-01-01

    There are few studies testing the differential susceptibility hypothesis (DSH: hypothesizing that some individuals are more responsive to both positive and negative experiences) with adult personality traits. The current study examined the DSH by investigating the moderating effect of sensory-processing sensitivity (SPS) on childhood experiences and life satisfaction. A total of 185 adults completed measures of SPS, positive/negative childhood experiences and life satisfaction. SPS did moderate the association between childhood experiences and life satisfaction. Simple slopes analysis compared those reporting high and low SPS (+/− 1 SD) and revealed that the difference was observed only for those who reported negative childhood experiences; with the high SPS group reporting lower life satisfaction. There was no difference observed in those reporting positive childhood experiences, which supported a diathesis-stress model rather than the DSH. PMID:26688599

  6. Automated microbial metabolism laboratory. [design of advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into test chambers

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The design and rationale of an advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into each of four test chambers are outlined. The feasibility for multiple addition tests was established and various details of the methodology were studied. The four chamber battery of tests include: (1) determination of the effect of various atmospheric gases and selection of that gas which produces an optimum response; (2) determination of the effect of incubation temperature and selection of the optimum temperature for performing Martian biochemical tests; (3) sterile soil is dosed with a battery of C-14 labeled substrates and subjected to experimental temperature range; and (4) determination of the possible inhibitory effects of water on Martian organisms is performed initially by dosing with 0.01 ml and 0.5 ml of medium, respectively. A series of specifically labeled substrates are then added to obtain patterns in metabolic 14CO2 (C-14)O2 evolution.

  7. Additive Manufacturing, Design, Testing, and Fabrication: A Full Engineering Experience at JSC

    NASA Technical Reports Server (NTRS)

    Zusack, Steven

    2016-01-01

    I worked on several projects this term. While most projects involved additive manufacturing, I was also involved with two design projects, two testing projects, and a fabrication project. The primary mentor for these was Richard Hagen. Secondary mentors were Hai Nguyen, Khadijah Shariff, and fabrication training from James Brown. Overall, my experience at JSC has been successful and what I have learned will continue to help me in my engineering education and profession long after I leave. My 3D printing projects ranged from less than a 1 cubic centimeter to about 1 cubic foot and involved several printers using different printing technologies. It was exciting to become familiar with printing technologies such as industrial grade FDM (Fused Deposition Modeling), the relatively new SLA (Stereolithography), and PolyJet. My primary duty with the FDM printers was to model parts that came in from various sources to print effectively and efficiently. Using methods my mentor taught me and the Stratasys Insight software, I was able to minimize imperfections, hasten build time, improve strength for specific forces (tensile, shear, etc...), and reduce likelihood of a print-failure. Also using FDM, I learned how to repair a part after it was printed. This is done by using a special kind of glue that chemically melts the two faces of plastic parts together to form a fused interface. My first goal with SLA technology was to bring the printer back to operational readiness. In becoming familiar with the Pegasus SLA printer, I researched the leveling, laser settings, and different vats to hold liquid material. With this research, I was successfully able to bring the Pegasus back online and have successfully printed multiple sample parts as well as functional parts. My experience with PolyJet technology has been focused on an understanding of the abilities/limits, costs, and the maintenance for daily use. Still upcoming will be experience with using a composite printer that uses FDM

  8. R and D of crystal scintillators from enriched isotopes for high sensitivity double β decay experiments

    SciTech Connect

    Danevich, F. A.

    2013-12-30

    Experiments to search for neutrinoless double beta decay enters to a new phase when a sensitivity on the level of T{sub 1/2}∼10{sup 26}−10{sup 28} yr is required. Scintillating low temperature detectors possess important properties required for high-sensitivity double beta decay experiments: presence of elements of interest, high energy resolution and detection efficiency, low level of background thanks to excellent particle discrimination ability. High concentration of isotope of interest and as low as possible radioactive contamination are important requirements to crystal scintillators. Other crucial issues are maximal output of detectors and minimal loss of enriched materials. Prospects of several scintillation materials, enriched in isotopes promising for double beta decay experiments, are discussed.

  9. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Tank, Jennifer; Sobota, Daniel; O'Brien, Jon; Webster, Jackson; Valett, H. Maurice; Dodds, Walter; Poole, Geoff; Peterson, Chris G.; Meyer, Judy; McDowell, William; Johnson, Sherri; Hamilton, Stephen; Gregory, Stanley; Grimm, Nancy; Dahm, Cliff; Cooper, Lee W; Ashkenas, Linda; Thomas, Suzanne; Sheibley, Rich; Potter, Jody; Niederlehner, Bobbie; Johnson, Laura; Helton, Ashley; Crenshaw, Chelsea; Burgin, Amy; Bernot, Melody; Beaulieu, Jake; Arango, Clay

    2009-01-01

    We measured uptake length of {sup 15}NO{sub 3}{sup -} in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO{sub 3}{sup -} uptake length. As part of the Lotic Intersite Nitrogen Experiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO{sub 3}{sup -} concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO{sub 3}{sup -} uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S{sub Wtot}). Uptake length increased with specific discharge (Q/w) and increasing NO{sub 3}{sup -} concentrations, showing a loss in removal efficiency in streams with high NO{sub 3}{sup -} concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO{sub 3}{sup -} removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO{sub 3}{sup -} uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO{sub 3}{sup -} uptake lengths via directly increasing both gross primary production and NO{sub 3}{sup -} concentration. Gross primary production shortened S{sub Wtot}, while increasing NO{sub 3}{sup -} lengthened S{sub Wtot} resulting in no net effect of land use on NO{sub 3}{sup -} removal.

  10. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    USGS Publications Warehouse

    Hall, R.O., Jr.; Tank, J.L.; Sobota, D.J.; Mulholland, P.J.; O'Brien, J. M.; Dodds, W.K.; Webster, J.R.; Valett, H.M.; Poole, G.C.; Peterson, B.J.; Meyer, J.L.; McDowell, W.H.; Johnson, S.L.; Hamilton, S.K.; Grimm, N. B.; Gregory, S.V.; Dahm, Clifford N.; Cooper, L.W.; Ashkenas, L.R.; Thomas, S.M.; Sheibley, R.W.; Potter, J.D.; Niederlehner, B.R.; Johnson, L.T.; Helton, A.M.; Crenshaw, C.M.; Burgin, A.J.; Bernot, M.J.; Beaulieu, J.J.; Arangob, C.P.

    2009-01-01

    We measured uptake length of 15NO-3 in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO-3 uptake length. As part of the Lotic Intersite Nitrogen eXperiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO-3 concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO-3 uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S Wtot). Uptake length increased with specific discharge (Q/w) and increasing NO-3 concentrations, showing a loss in removal efficiency in streams with high NO-3 concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO-3 removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO-3 uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO-3 uptake lengths via directly increasing both gross primary production and NO-3 concentration. Gross primary production shortened SWtot, while increasing NO-3 lengthened SWtot resulting in no net effect of land use on NO- 3 removal. ?? 2009.

  11. Synaptic rewiring of stress-sensitive neurons by early-life experience: A mechanism for resilience?

    PubMed Central

    Singh-Taylor, Akanksha; Korosi, Aniko; Molet, Jenny; Gunn, Benjamin G.; Baram, Tallie Z.

    2014-01-01

    Genes and environment interact to influence cognitive and emotional functions throughout life. Early-life experiences in particular contribute to vulnerability or resilience to a number of emotional and cognitive illnesses in humans. In rodents, early-life experiences directly lead to resilience or vulnerability to stress later in life, and influence the development of cognitive and emotional deficits. The mechanisms for the enduring effects of early-life experiences on cognitive and emotional outcomes are not completely understood. Here, we present emerging information supporting experience-dependent modulation of the number and efficacy of synaptic inputs onto stress-sensitive neurons. This synaptic ‘rewiring’, in turn, may influence the expression of crucial neuronal genes. The persistent changes in gene expression in resilient versus vulnerable rodent models are likely maintained via epigenetic mechanisms. Thus, early-life experience may generate resilience by altering synaptic input to neurons, which informs them to modulate their epigenetic machinery. PMID:25530985

  12. Future detectability of gravitational-wave induced lensing from high-sensitivity CMB experiments

    NASA Astrophysics Data System (ADS)

    Namikawa, Toshiya; Yamauchi, Daisuke; Taruya, Atsushi

    2015-02-01

    We discuss the future detectability of gravitational-wave induced lensing from high-sensitivity cosmic microwave background (CMB) experiments. Gravitational waves can induce a rotational component of the weak-lensing deflection angle, usually referred to as the curl mode, which would be imprinted on the CMB maps. Using the technique of reconstructing lensing signals involved in CMB maps, this curl mode can be measured in an unbiased manner, offering an independent confirmation of the gravitational waves complementary to B-mode polarization experiments. Based on the Fisher matrix analysis, we first show that with the noise levels necessary to confirm the consistency relation for the primordial gravitational waves, the future CMB experiments will be able to detect the gravitational-wave induced lensing signals. For a tensor-to-scalar ratio of r ≲0.1 , even if the consistency relation is difficult to confirm with a high significance, the gravitational-wave induced lensing will be detected at more than 3 σ significance level. Further, we point out that high-sensitivity experiments will be also powerful to constrain the gravitational waves generated after the recombination epoch. Compared to the B-mode polarization, the curl mode is particularly sensitive to gravitational waves generated at low redshifts (z ≲10 ) with a low frequency (k ≲1 0-3 Mpc-1 ), and it could give a much tighter constraint on their energy density ΩGW by more than 3 orders of magnitude.

  13. The Additional-Mass Effect of Plates as Determined by Experiments

    NASA Technical Reports Server (NTRS)

    Gracey, William

    1941-01-01

    The apparent increase in the inertia properties of a body moving in a fluid medium has been called the additional-mass effect. This report presents a resume of test procedures and results of experimental determinations of the additional-mass effect of flat plates. In addition to data obtained from various foreign sources and from a NACA investigation in 1933, the results of tests recently conducted by the National Advisory Committee for Aeronautics are included.

  14. In situ temperature jump high-frequency dynamic nuclear polarization experiments: enhanced sensitivity in liquid-state NMR spectroscopy.

    PubMed

    Joo, Chan-Gyu; Hu, Kan-Nian; Bryant, Jeffrey A; Griffin, Robert G

    2006-07-26

    We describe an experiment, in situ temperature jump dynamic nuclear polarization (TJ-DNP), that is demonstrated to enhance sensitivity in liquid-state NMR experiments of low-gamma spins--13C, 15N, etc. The approach consists of polarizing a sample at low temperature using high-frequency (140 GHz) microwaves and a biradical polarizing agent and then melting it rapidly with a pulse of 10.6 microm infrared radiation, followed by observation of the NMR signal in the presence of decoupling. In the absence of polarization losses due to relaxation, the enhancement should be epsilon+ = epsilon(T(obs)/T(mu)(wave)), where epsilon+ is the observed enhancement, epsilon is the enhancement obtained at the temperature where the polarization process occurs, and T(mu)(wave) and T(obs) are the polarization and observation temperatures, respectively. In a single experimental cycle, we observe room-temperature enhancements, epsilon(dagger), of 13C signals in the range 120-400 when using a 140 GHz gyrotron microwave source, T(mu)(wave) = 90 K, and T(obs) = 300 K. In addition, we demonstrate that the experiment can be recycled to perform signal averaging that is customary in contemporary NMR spectroscopy. Presently, the experiment is applicable to samples that can be repeatedly frozen and thawed. TJ-DNP could also serve as the initial polarization step in experiments designed for rapid acquisition of multidimensional spectra. PMID:16848479

  15. Using Embryology Screencasts: A Useful Addition to the Student Learning Experience?

    ERIC Educational Resources Information Center

    Evans, Darrell J. R.

    2011-01-01

    Although podcasting has been a well used resource format in the last few years as a way of improving the student learning experience, the inclusion of enhanced audiovisual formats such as screencasts has been less used, despite the advantage that they work well for both visual and auditory learners. This study examines the use of and student…

  16. Determinant for β-subunit regulation in high-conductance voltage-activated and Ca2+-sensitive K+ channels: An additional transmembrane region at the N terminus

    PubMed Central

    Wallner, Martin; Meera, Pratap; Toro, Ligia

    1996-01-01

    The pore-forming α subunit of large conductance voltage- and Ca2+-sensitive K (MaxiK) channels is regulated by a β subunit that has two membrane-spanning regions separated by an extracellular loop. To investigate the structural determinants in the pore-forming α subunit necessary for β-subunit modulation, we made chimeric constructs between a human MaxiK channel and the Drosophila homologue, which we show is insensitive to β-subunit modulation, and analyzed the topology of the α subunit. A comparison of multiple sequence alignments with hydrophobicity plots revealed that MaxiK channel α subunits have a unique hydrophobic segment (S0) at the N terminus. This segment is in addition to the six putative transmembrane segments (S1–S6) usually found in voltage-dependent ion channels. The transmembrane nature of this unique S0 region was demonstrated by in vitro translation experiments. Moreover, normal functional expression of signal sequence fusions and in vitro N-linked glycosylation experiments indicate that S0 leads to an exoplasmic N terminus. Therefore, we propose a new model where MaxiK channels have a seventh transmembrane segment at the N terminus (S0). Chimeric exchange of 41 N-terminal amino acids, including S0, from the human MaxiK channel to the Drosophila homologue transfers β-subunit regulation to the otherwise unresponsive Drosophila channel. Both the unique S0 region and the exoplasmic N terminus are necessary for this gain of function. PMID:8962157

  17. Determinant for beta-subunit regulation in high-conductance voltage-activated and Ca(2+)-sensitive K+ channels: an additional transmembrane region at the N terminus.

    PubMed

    Wallner, M; Meera, P; Toro, L

    1996-12-10

    The pore-forming alpha subunit of large conductance voltage- and Ca(2+)-sensitive K (MaxiK) channels is regulated by a beta subunit that has two membrane-spanning regions separated by an extracellular loop. To investigate the structural determinants in the pore-forming alpha subunit necessary for beta-subunit modulation, we made chimeric constructs between a human MaxiK channel and the Drosophila homologue, which we show is insensitive to beta-subunit modulation, and analyzed the topology of the alpha subunit. A comparison of multiple sequence alignments with hydrophobicity plots revealed that MaxiK channel alpha subunits have a unique hydrophobic segment (S0) at the N terminus. This segment is in addition to the six putative transmembrane segments (S1-S6) usually found in voltage-dependent ion channels. The transmembrane nature of this unique S0 region was demonstrated by in vitro translation experiments. Moreover, normal functional expression of signal sequence fusions and in vitro N-linked glycosylation experiments indicate that S0 leads to an exoplasmic N terminus. Therefore, we propose a new model where MaxiK channels have a seventh transmembrane segment at the N terminus (S0). Chimeric exchange of 41 N-terminal amino acids, including S0, from the human MaxiK channel to the Drosophila homologue transfers beta-subunit regulation to the otherwise unresponsive Drosophila channel. Both the unique S0 region and the exoplasmic N terminus are necessary for this gain of function. PMID:8962157

  18. Designing Location-Based Learning Experiences for People with Intellectual Disabilities and Additional Sensory Impairments

    ERIC Educational Resources Information Center

    Brown, David J.; McHugh, David; Standen, Penny; Evett, Lindsay; Shopland, Nick; Battersby, Steven

    2011-01-01

    The research reported here is part of a larger project which seeks to combine serious games (or games-based learning) with location-based services to help people with intellectual disabilities and additional sensory impairments to develop work based skills. Specifically this paper reports on where these approaches are combined to scaffold the…

  19. Optimization of detection sensitivity for a Fiber Optic Intrusion Detection System (FOIDS) using design of experiments.

    SciTech Connect

    Miller, Larry D.; Mack, Thomas Kimball; Mitchiner, Kim W.; Varoz, Carmella A.

    2010-06-01

    The Fiber Optic Intrusion Detection System (FOIDS)1 is a physical security sensor deployed on fence lines to detect climb or cut intrusions by adversaries. Calibration of detection sensitivity can be time consuming because, for example, the FiberSenSys FD-332 has 32 settings that can be adjusted independently to provide a balance between a high probability of detection and a low nuisance alarm rate. Therefore, an efficient method of calibrating the FOIDS in the field, other than by trial and error, was needed. This study was conducted to: x Identify the most significant settings for controlling detection x Develop a way of predicting detection sensitivity for given settings x Develop a set of optimal settings for validation The Design of Experiments (DoE) 2-4 methodology was used to generate small, planned test matrixes, which could be statistically analyzed to yield more information from the test data. Design of Experiments is a statistical methodology for quickly optimizing performance of systems with measurable input and output variables. DoE was used to design custom screening experiments based on 11 FOIDS settings believed to have the most affect on WKH types of fence perimeter intrusions were evaluated: simulated cut intrusions and actual climb intrusions. Two slightly different two-level randomized fractional factorial designed experiment matrixes consisting of 16 unique experiments were performed in the field for each type of intrusion. Three repetitions were conducted for every cut test; two repetitions were conducted for every climb test. Total number of cut tests analyzed was 51; the total number of climb tests was 38. This paper discusses the results and benefits of using Design of Experiments (DoE) to calibrate and optimize the settings for a FOIDS sensor

  20. MATPASS/CPMG: a sensitivity enhanced magic-angle spinning sideband separation experiment for disordered solids.

    PubMed

    Hung, Ivan; Edwards, Trenton; Sen, Sabyasachi; Gan, Zhehong

    2012-08-01

    A Carr-Purcell Meiboom-Gill (CPMG) sensitivity-enhanced spinning sideband separation experiment is presented. The experiment combines the idea of magic-angle turning and phase-adjusted sideband separation (MATPASS), allowing for isotropic/anisotropic chemical shift separation of disordered solids with line widths far greater than the magic-angle spinning frequency. The use of CPMG enhances the sensitivity of the wide-line spectra by an order of magnitude via multiple-echo acquisition. The MATPASS/CPMG protocol involves acquisition of time-domain data using a MAT/CPMG pulse sequence followed by f(1) shearing during data processing to arrive at the PASS representation. Such a protocol has √2 higher sensitivity than the conventional PASS method because all CPMG echo signals are used for the final PASS spectrum. Application of this method is demonstrated using a GeSe₄ glass sample with both ⁷⁷Se isotropic line widths and chemical shift anisotropy that far exceed the spinning frequency. The sideband separation allows for the measurement of chemical shift anisotropy of the disordered solids. PMID:22750637

  1. Development of high-sensitivity NMOR magnetometry for an EDM experiment

    NASA Astrophysics Data System (ADS)

    Nanao, T.; Yoshimi, A.; Inoue, T.; Furukawa, T.; Tsuchiya, M.; Hayashi, H.; Uchida, M.; Asahi, K.

    2011-09-01

    Developments are in progress aiming at the search for a permanent Electric Dipole Moment (EDM) in 129Xe atom using a low-frequency nuclear spin maser. In the EDM experiment, drifts in the applied static magnetic field in a long time scale are the dominating source of errors in frequency determination. The stability of the applied field and its monitoring by use of a high sensitivity magnetometer are thus the indispensable part of the EDM experiment. We are developing a magnetometer based on the Nonlinear Magneto-Optical Rotation (NMOR) effect in Rb atom. The sharp response to the magnetic field in this apparatus relies on a long relaxation time of the atomic spin alignment induced by linearly polarized laser light, and thus the suppression of the atomic decoherence should be essential for its sensitivity. Coating the inner walls of the cell with an antirelaxation layer, introducing a buffer gas in the cell and cancelling the transverse magnetic field should be effective in preventing atoms from depolarization. We obtained several NMOR spectra for Rb in cylindrical cells in such attempts. Up to now a sensitivity of δB=1.5 × 10-5 G has been attained in the present setup.

  2. Combustion Module-2 Preparations Completed for SPACEHAB Mission Including the Addition of a New Major Experiment

    NASA Technical Reports Server (NTRS)

    Over, Ann P.

    2001-01-01

    The Combustion Module-1 (CM-1) was a large, state-of-the-art space shuttle Spacelab facility that was designed, built, and operated on STS-83 and STS-94 by a team from the NASA Glenn Research Center composed of civil servants and local support contractors (Analex and Zin Technologies). CM-1 accomplished the incredible task of providing a safe environment to support flammable and toxic gases while providing a suite of diagnostics for science measurements more extensive than any prior shuttle experiment (or anything since). Finally, CM-1 proved that multiple science investigations can be accommodated in one facility, a crucial step for Glenn's Fluids and Combustion Facility developed for the International Space Station. However, the story does not end with CM-1. In 1998, CM-2 was authorized to take the CM-1 accomplishments a big step further by completing three major steps: Converting the entire experiment to operate in a SPACEHAB module. Conducting an extensive hardware refurbishment and upgrading diagnostics (e.g., cameras, gas chromatograph, and numerous sensors). Adding a new, completely different combustion experiment.

  3. Laser Additive Melting and Solidification of Inconel 718: Finite Element Simulation and Experiment

    NASA Astrophysics Data System (ADS)

    Romano, John; Ladani, Leila; Sadowski, Magda

    2016-03-01

    The field of powdered metal additive manufacturing is experiencing a surge in public interest finding uses in aerospace, defense, and biomedical industries. The relative youth of the technology coupled with public interest makes the field a vibrant research topic. The authors have expanded upon previously published finite element models used to analyze the processing of novel engineering materials through the use of laser- and electron beam-based additive manufacturing. In this work, the authors present a model for simulating fabrication of Inconel 718 using laser melting processes. Thermal transport phenomena and melt pool geometries are discussed and validation against experimental findings is presented. After comparing experimental and simulation results, the authors present two correction correlations to transform the modeling results into meaningful predictions of actual laser melting melt pool geometries in Inconel 718.

  4. Additional results on space environmental effects on polymer matrix composites: Experiment A0180

    NASA Technical Reports Server (NTRS)

    Tennyson, R. C.

    1992-01-01

    Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure.

  5. Convection sensitivity and thermal analyses for indium and indium-lead mixing experiment (74-18)

    NASA Technical Reports Server (NTRS)

    Bourgeois, S. V.; Doty, J. P.

    1976-01-01

    Sounding rocket Experiment 74-18 was designed to demonstrate the effects of the Black Brandt rocket acceleration levels (during the low-g coast phase of its flight) on the motion of a liquid metal system to assist in preflight design. Some post flight analyses were also conducted. Preflight studies consisted of heat transfer analysis and convection sensitivity and convection modeling analyses which aided in the: (1) final selection of fluid materials (indium-lead melts rather than paraffins); (2) design and timing of heater and quench system; and (3) preflight predictions of the degree of lead penetration into the pure indium segment of the fluid. Postflight studies involved: (1) updating the convection sensitivity calculations by utilizing actual flight gravity levels; and (2) modeling the mixing in the flight samples.

  6. A sensitive, high resolution magic angle turning experiment for measuring chemical shift tensor principal values

    NASA Astrophysics Data System (ADS)

    Alderman, D. W.

    1998-12-01

    A sensitive, high-resolution 'FIREMAT' two-dimensional (2D) magic-angle-turning experiment is described that measures chemical shift tensor principal values in powdered solids. The spectra display spinning-sideband patterns separated by their isotropic shifts. The new method's sensitivity and high resolution in the isotropic-shift dimension result from combining the 5pi magic-angle-turning pulse sequence, an extension of the pseudo-2D sideband-suppression data rearrangement, and the TIGER protocol for processing 2D data. TPPM decoupling is used to enhance resolution. The method requires precise synchronization of the pulses and sampling to the rotor position. It is shown that the technique obtains 35 natural-abundance 13C tensors from erythromycin in 19 hours, and high quality naturalabundance 15N tensors from eight sites in potassium penicillin V in three days on a 400MHz spectrometer.

  7. Experiences of persons with multiple chemical sensitivity with mental health providers

    PubMed Central

    Gibson, Pamela Reed; Lockaby, Sharon D; Bryant, Jenna Michele

    2016-01-01

    In this paper, we summarize the results of an online survey of persons in the United States with chemical intolerance/multiple chemical sensitivity who sought help from mental health providers, including counselors, psychologists, psychiatrists, and others. Respondents reported on their most recent contact with a provider, describing reasons for the contact, accommodations requested and received, and suggestions for how the experience could be more helpful. Overall, though clients were accommodated in small ways, some received no accommodation, and many felt that the providers needed to be more knowledgeable regarding chemical intolerance. Results are discussed in terms of the importance of providers becoming more aware of multiple chemical sensitivity and more willing to make their services accessible to these clients. PMID:27103817

  8. Experiments to Populate and Validate a Processing Model for Polyurethane Foam: Additional Data for Structural Foams.

    SciTech Connect

    Rao, Rekha R.; Celina, Mathias C.; Giron, Nicholas Henry; Long, Kevin Nicholas; Russick, Edward M.

    2015-01-01

    We are developing computational models to help understand manufacturing processes, final properties and aging of structural foam, polyurethane PMDI. Th e resulting model predictions of density and cure gradients from the manufacturing process will be used as input to foam heat transfer and mechanical models. BKC 44306 PMDI-10 and BKC 44307 PMDI-18 are the most prevalent foams used in structural parts. Experiments needed to parameterize models of the reaction kinetics and the equations of motion during the foam blowing stages were described for BKC 44306 PMDI-10 in the first of this report series (Mondy et al. 2014). BKC 44307 PMDI-18 is a new foam that will be used to make relatively dense structural supports via over packing. It uses a different catalyst than those in the BKC 44306 family of foams; hence, we expect that the reaction kineti cs models must be modified. Here we detail the experiments needed to characteriz e the reaction kinetics of BKC 44307 PMDI-18 and suggest parameters for the model based on these experiments. In additi on, the second part of this report describes data taken to provide input to the preliminary nonlinear visco elastic structural response model developed for BKC 44306 PMDI-10 foam. We show that the standard cu re schedule used by KCP does not fully cure the material, and, upon temperature elevation above 150 o C, oxidation or decomposition reactions occur that alter the composition of the foam. These findings suggest that achieving a fully cured foam part with this formulation may be not be possible through therma l curing. As such, visco elastic characterization procedures developed for curing thermosets can provide only approximate material properties, since the state of the material continuously evolves during tests.

  9. In situ vitrification and the effects of soil additives; A mixture experiment case study

    SciTech Connect

    Piepel, G.F.; Shade, J.W. )

    1992-01-01

    This paper presents a case study involving in situ vitrification (ISV), a process for immobilizing chemical or nuclear wastes in soil by melting-dissolving the contaminated soil into a glass block. One goal of the study was to investigate how viscosity and electrical conductivity were affected by mixing CaO and Na{sub 2}O with soil. A three-component constrained-region mixture experiment design was generated and the viscosity and electrical conductivity data collected. Several second-order mixture models were considered, and the Box-Cox transformation technique was applied to select property transformations. The fitted models were used to produce contour and component effects plots.

  10. Adaptation of the pore diffusion model to describe multi-addition batch uptake high-throughput screening experiments.

    PubMed

    Traylor, Steven J; Xu, Xuankuo; Li, Yi; Jin, Mi; Li, Zheng Jian

    2014-11-14

    Equilibrium isotherm and kinetic mass transfer measurements are critical to mechanistic modeling of binding and elution behavior within a chromatographic column. However, traditional methods of measuring these parameters are impractically time- and labor-intensive. While advances in high-throughput robotic liquid handling systems have created time and labor-saving methods of performing kinetic and equilibrium measurements of proteins on chromatographic resins in a 96-well plate format, these techniques continue to be limited by physical constraints on protein addition, incubation and separation times; the available concentration of protein stocks and process pools; and practical constraints on resin and fluid volumes in the 96-well format. In this study, a novel technique for measuring protein uptake kinetics (multi-addition batch uptake) has been developed to address some of these limitations during high-throughput batch uptake kinetic measurements. This technique uses sequential additions of protein stock to chromatographic resin in a 96-well plate and the subsequent removal of each addition by centrifugation or vacuum separation. The pore diffusion model was adapted here to model multi-addition batch uptake and was tested and compared with traditional batch uptake measurements of uptake of an Fc-fusion protein on an anion exchange resin. Acceptable agreement between the two techniques is achieved for the two solution conditions investigated here. In addition, a sensitivity analysis of the model to the physical inputs is presented and the advantages and limitations of the multi-addition batch uptake technique are explored. PMID:25311484

  11. Sensitivity Reach of the Neutron EDM Experiment: The Electric Field Strength

    SciTech Connect

    Hennings-Yeomans, R.; Cooper, M.; Currie, S. A.; Makela, M. F.; Ramsey, J. C.; Tajima, S.; Womack, T. L.; Long, J. C.; Stanislaus, S.

    2010-08-04

    The search for an electric dipole moment of the neutron tests physics beyond the Standard Model such as new sources of CP-violation and Supersymmetry. The nEDM experiment aims to improve the sensitivity on the current limit of the electric dipole moment of the neutron to <10{sup -27} e{center_dot}cm. The experiment will use a flux of Ultra Cold Neutrons (UCNs) produced and stored in a bath of superfluid He-II. A change in precession frequency is expected for a non-zero EDM when an electric field is applied parallel and antiparallel to a magnetic field across the neutron storage cell. A dominant parameter in terms of reducing the statistical uncertainty of this measurement is the strength of the applied electric field. An experiment to measure if superfluid He-II can sustain up to 50 kV/cm for a volume and electrode spacings comparable to the nEDM experiment has been constructed at Los Alamos National Laboratory. It consists in a large-area parallel plate capacitor immersed in a 200 liter central volume inside a suitable cryostat that in turn is connected to a dilution refrigerator unit. A description of test runs and the status of the experiment is presented.

  12. Sensitivity Reach of the Neutron EDM Experiment: The Electric Field Strength

    NASA Astrophysics Data System (ADS)

    Hennings-Yeomans, R.; Cooper, M.; Currie, S. A.; Makela, M. F.; Ramsey, J. C.; Tajima, S.; Womack, T. L.; Long, J. C.; Stanislaus, S.

    2010-08-01

    The search for an electric dipole moment of the neutron tests physics beyond the Standard Model such as new sources of CP-violation and Supersymmetry. The nEDM experiment aims to improve the sensitivity on the current limit of the electric dipole moment of the neutron to <10-27 eṡcm. The experiment will use a flux of Ultra Cold Neutrons (UCNs) produced and stored in a bath of superfluid He-II. A change in precession frequency is expected for a non-zero EDM when an electric field is applied parallel and antiparallel to a magnetic field across the neutron storage cell. A dominant parameter in terms of reducing the statistical uncertainty of this measurement is the strength of the applied electric field. An experiment to measure if superfluid He-II can sustain up to 50 kV/cm for a volume and electrode spacings comparable to the nEDM experiment has been constructed at Los Alamos National Laboratory. It consists in a large-area parallel plate capacitor immersed in a 200 liter central volume inside a suitable cryostat that in turn is connected to a dilution refrigerator unit. A description of test runs and the status of the experiment is presented.

  13. Additive manufacture (3d printing) of plasma diagnostic components and assemblies for fusion experiments

    NASA Astrophysics Data System (ADS)

    Sieck, Paul; Woodruff, Simon; Stuber, James; Romero-Talamas, Carlos; Rivera, William; You, Setthivoine; Card, Alexander

    2015-11-01

    Additive manufacturing (or 3D printing) is now becoming sufficiently accurate with a large range of materials for use in printing sensors needed universally in fusion energy research. Decreasing production cost and significantly lowering design time of energy subsystems would realize significant cost reduction for standard diagnostics commonly obtained through research grants. There is now a well-established set of plasma diagnostics, but these expensive since they are often highly complex and require customization, sometimes pace the project. Additive manufacturing (3D printing) is developing rapidly, including open source designs. Basic components can be printed for (in some cases) less than 1/100th costs of conventional manufacturing. We have examined the impact that AM can have on plasma diagnostic cost by taking 15 separate diagnostics through an engineering design using Conventional Manufacturing (CM) techniques to determine costs of components and labor costs associated with getting the diagnostic to work as intended. With that information in hand, we set about optimizing the design to exploit the benefits of AM. Work performed under DOE Contract DE-SC0011858.

  14. Experiences of clinical tutors with English as an additional language (EAL) students.

    PubMed

    Lu, Hongyan; Maithus, Caroline

    2012-11-01

    Clinical tutors, referred to in the international literature as clinical supervisors, facilitators, mentors or instructors, are responsible for providing and supervising workplace learning opportunities for groups of Bachelor of Nursing (BN) students. They also play a key role in assessing students. The role modeling and support provided by both clinical tutors and registered nurses (RN) or nurse preceptors helps students become familiar with the language in which nursing work is realised. As BN student cohorts in New Zealand have become more diverse in terms of cultures, ethnicities and language backgrounds, clinical tutors have to directly facilitate the development of context-specific and client-focused communication skills for students who speak English as an additional language. We undertook a study which looked at the perceptions of new nursing graduates with English as an additional language (EAL) on the development of spoken language skills for the clinical workplace. As well as interviewing graduates, we spoke to four clinical tutors in order to elicit their views on the language development of EAL students in previous cohorts. This article reports on the themes which emerged from the interviews with the tutors. These include goal setting for communication, integrating students into nursing work, making assessment less stressful, and endorsing independent learning strategies. Based on their observations and on other published research we make some suggestions about ways both clinical tutors and EAL students within their teaching groups could be supported in the development of communication skills for clinical practice. PMID:23421011

  15. Model of a fibreoptic phase-sensitive reflectometer and its comparison with the experiment

    SciTech Connect

    Tosoni, O; Podivilov, Evgenii V; Babin, Sergei A; Aksenov, S B

    2010-12-09

    A statistical model describing the Rayleigh-scattering reflectograms of narrowband Gaussian pulses in optical fibres is constructed taking into account linear (the finite spectral linewidth because of frequency fluctuations, finite frequency band of the photodetector) and nonlinear (modulation instability) effects influencing the reflectograms' visibility. The model is compared with the experiment, demonstrating the adequacy of the theoretical description. The possibilities of obtaining optimal parameters, important for practical applications of the phase-sensitive reflectometer as a distributed fibreoptic intrusion sensor are discussed. (optical fibres)

  16. CMS Pixel Telescope Addition to T-980 Bent Crystal Collimation Experiment at the Tevatron

    SciTech Connect

    Rivera, Ryan; Annala, Jerry; Johnson, Todd; Kwan, Simon; Lundberg, Carl; Still, Dean; Prosser, Alan; Uplegger, Lorenzo; Zagel, Jim; Zvodaya, Viktoriya; /Fermilab

    2011-09-14

    An enhancement to the T-980 bent crystal collimation experiment at the Tevatron has been completed. The enhancement was the installation of a pixel telescope inside the vacuum-sealed beam pipe of the Tevatron. The telescope is comprised of six CMS PSI46 pixel plaquettes, arranged as three stations of horizontal and vertical planes, with the CAPTAN system for data acquisition and control. The purpose of the pixel telescope is to measure beam profiles produced by bent crystals under various conditions. The telescope electronics inside the beam pipe initially were not adequately shielded from the image current of the passing beams. A new shielding approach was devised and installed, which resolved the problem. The noise issues encountered and the mitigating techniques are presented herein, as well as some preliminary results from the telescope.

  17. Towards Special Daemon-Sensitive Electron Multiplier:. Positive Outcome of March 2009 Experiment

    NASA Astrophysics Data System (ADS)

    Drobyshevski, E. M.; Drobyshevski, M. E.

    Results of the experiments on daemon detection performed in St-Petersburg in March 2009 are presented. Adding the data obtained with the daemon-sensitive FEU-167-1 PM tubes to the data amassed in our previous measurements (starting from 2000) raises the confidence level of existence of the spring maximum in NEACHO (near-Earth almost circular heliocentric orbit) daemon flux to ~ 5σ. The first test experiments conducted with the "dark" electron multiplier tubes, TEU-167 with a thick (~ 0.5 μm) Al coating over all of the inner surface of the near-cathode multiplier section, including also its front screen, look encouraging. They provide supportive evidence for the existence of diurnal modulation of the daemon flux and offer ~ 3.4 × 10-7 cm-2s-1 for its lower limit in March, in good agreement with our earlier estimates and measurements.

  18. Summary and overview of the CYCLOPS P addition Lagrangian experiment in the Eastern Mediterranean

    NASA Astrophysics Data System (ADS)

    Krom, M. D.; Thingstad, T. F.; Brenner, S.; Carbo, P.; Drakopoulos, P.; Fileman, T. W.; Flaten, G. A. F.; Groom, S.; Herut, B.; Kitidis, V.; Kress, N.; Law, C. S.; Liddicoat, M. I.; Mantoura, R. F. C.; Pasternak, A.; Pitta, P.; Polychronaki, T.; Psarra, S.; Rassoulzadegan, F.; Skjoldal, E. F.; Spyres, G.; Tanaka, T.; Tselepides, A.; Wassmann, P.; Wexels Riser, C.; Woodward, E. M. S.; Zodiatis, G.; Zohary, T.

    2005-11-01

    CYCLOPS was a European Framework 5 program to further our understanding of phosphorus cycling in the Eastern Mediterranean. The core of CYCLOPS was a Lagrangian experiment in which buffered phosphoric acid was added to a <4×4 km patch of water together with SF 6 as the inert tracer. The patch was followed for nine days in total. Results obtained prior to the experiment showed that the system was typically ultra-oligotrophic and P-starved with DON:DOP, PON:POP and DIN:DIP all having ratios greatly in excess of 16:1 in surface waters. To our surprise, we found that although the added phosphate was rapidly taken up by the microbial biota, there was a small but significant decrease in chlorophyll a and no increase in primary production, together with an increase in heterotrophic bacterial activity, ciliate numbers and in the gut fullness and egg numbers in the zooplankton community. A microcosm experiment carried out using within-patch and out-of-patch water showed that the phytoplankton community were N and P co-limited while the bacteria and micrograzers were P-limited. Thus this system tends to N and P co-limitation of phytoplankton productivity in summer possibly caused by bioavailable DIN being converted into non-bioavailable forms of DON. On the basis of the data collected within the programme it was concluded that this behavior could be explained by three non-mutually exclusive processes described as (1) trophic by-pass in which the added phosphate gets directly to the grazing part of the predatory food chain from the heterotrophic bacteria bypassing the phytoplankton compartment phosphate, (2) trophic tunnelling in which phosphate is rapidly taken up by both phytoplankton and bacteria via rapid luxury consumption. This causes an immediate change in the phosphorus content but not the abundance of the prey organisms. The added P then "reappears" as responses at the predator level much more rapidly than expected, and (3) mixotrophic by-pass in which inorganic

  19. Enhanced photovoltaic performance of Cu-based metal-organic frameworks sensitized solar cell by addition of carbon nanotubes

    PubMed Central

    Lee, Deok Yeon; Shin, Chan Yong; Yoon, Seog Joon; Lee, Haw Young; Lee, Wonjoo; Shrestha, Nabeen K.; Lee, Joong Kee; Han, Sung-Hwan

    2014-01-01

    In the present work, TiO2 nanoparticle and multi-walled carbon nanotubes composite powder is prepared hydrothermally. After doctor blading the paste from composite powder, the resulted composite film is sensitized with Cu-based metal-organic frameworks using a layer-by-layer deposition technique and the film is characterized using FE-SEM, EDX, XRD, UV/Visible spectrophotometry and photoluminescence spectroscopy. The influence of the carbon nanotubes in photovoltaic performance is studied by constructing a Grätzel cell with I3−/I− redox couple containing electrolyte. The results demonstrate that the introduction of carbon nanotubes accelerates the electron transfer, and thereby enhances the photovoltaic performance of the cell with a nearly 60% increment in power conversion efficiency. PMID:24488110

  20. Enhanced photovoltaic performance of Cu-based metal-organic frameworks sensitized solar cell by addition of carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Lee, Deok Yeon; Shin, Chan Yong; Yoon, Seog Joon; Lee, Haw Young; Lee, Wonjoo; Shrestha, Nabeen K.; Lee, Joong Kee; Han, Sung-Hwan

    2014-02-01

    In the present work, TiO2 nanoparticle and multi-walled carbon nanotubes composite powder is prepared hydrothermally. After doctor blading the paste from composite powder, the resulted composite film is sensitized with Cu-based metal-organic frameworks using a layer-by-layer deposition technique and the film is characterized using FE-SEM, EDX, XRD, UV/Visible spectrophotometry and photoluminescence spectroscopy. The influence of the carbon nanotubes in photovoltaic performance is studied by constructing a Grätzel cell with I3-/I- redox couple containing electrolyte. The results demonstrate that the introduction of carbon nanotubes accelerates the electron transfer, and thereby enhances the photovoltaic performance of the cell with a nearly 60% increment in power conversion efficiency.

  1. Geostationary Coastal and Air Pollution Events (GEO-CAPE) Sensitivity Analysis Experiment

    NASA Technical Reports Server (NTRS)

    Lee, Meemong; Bowman, Kevin

    2014-01-01

    Geostationary Coastal and Air pollution Events (GEO-CAPE) is a NASA decadal survey mission to be designed to provide surface reflectance at high spectral, spatial, and temporal resolutions from a geostationary orbit necessary for studying regional-scale air quality issues and their impact on global atmospheric composition processes. GEO-CAPE's Atmospheric Science Questions explore the influence of both gases and particles on air quality, atmospheric composition, and climate. The objective of the GEO-CAPE Observing System Simulation Experiment (OSSE) is to analyze the sensitivity of ozone to the global and regional NOx emissions and improve the science impact of GEO-CAPE with respect to the global air quality. The GEO-CAPE OSSE team at Jet propulsion Laboratory has developed a comprehensive OSSE framework that can perform adjoint-sensitivity analysis for a wide range of observation scenarios and measurement qualities. This report discusses the OSSE framework and presents the sensitivity analysis results obtained from the GEO-CAPE OSSE framework for seven observation scenarios and three instrument systems.

  2. [Requirements for drug approval and additional benefits assessment: Regulatory aspects and experiences].

    PubMed

    Broich, K; Löbker, W; Schulte, A; Beinlich, P; Müller, T

    2016-04-01

    The early assessment of benefits of newly approved drugs with novel active substances or new applications, which came into force on 1 January 2011 still represents a challenge to all parties involved. This article highlights the definitions, regulatory requirements and interaction between drug marketing approval and early assessment of benefits in Germany. The constellation of an extensively harmonized European and even international drug authorization process with a predominantly national regulation of drug reimbursement situation inevitably causes friction, which could be markedly reduced through early joint advisory discussions during the planning phase for pivotal clinical trials. During the year 2015 the Federal Institute for Drugs and Medical Devices (BfArM) carried out 300 scientific advice procedures of which 34 were concerned with applications in the field of indications for the central nervous system (CNS). In comparison 98 advisory meetings were held by the Federal Joint Committee (G-BA) of which the BfArM provided advice in 12 instances and in 2 cases on CNS indications. Study design, endpoints and appropriate comparative therapies are the key issues in exchanges and discussions between the BfArM, the G‑BA and applicants. Under these aspects the BfArM and G‑BA promote an early and consistent involvement in early advice procedures regarding the prerequisites for drug approval and assessment of additional benefits. PMID:27003322

  3. Effects of biochar addition to soil on nitrogen fluxes in a winter wheat lysimeter experiment

    NASA Astrophysics Data System (ADS)

    Hüppi, Roman; Leifeld, Jens; Neftel, Albrecht; Conen, Franz; Six, Johan

    2014-05-01

    Biochar is a carbon-rich, porous residue from pyrolysis of biomass that potentially increases crop yields by reducing losses of nitrogen from soils and/or enhancing the uptake of applied fertiliser by the crops. Previous research is scarce about biochar's ability to increase wheat yields in temperate soils or how it changes nitrogen dynamics in the field. In a lysimeter system with two different soils (sandy/silt loam) nitrogen fluxes were traced by isotopic 15N enriched fertiliser to identify changes in nitrous oxide emissions, leaching and plant uptake after biochar addition. 20t/ha woodchip-waste biochar (pH=13) was applied to these soils in four lysimeters per soil type; the same number of lysimeters served as a control. The soils were cropped with winter wheat during the season 2012/2013. 170 kg-N/ha ammonium nitrate fertiliser with 10% 15N was applied in 3 events during the growing season and 15N concentrations where measured at different points in time in plant, soil, leachate and emitted nitrous oxide. After one year the lysimeter system showed no difference between biochar and control treatment in grain- and straw yield or nitrogen uptake. However biochar did reduce nitrous oxide emissions in the silt loam and losses of nitrate leaching in sandy loam. This study indicates potential reduction of nitrogen loss from cropland soil by biochar application but could not confirm increased yields in an intensive wheat production system.

  4. Diesel engine experiments with oxygen enrichment, water addition and lower-grade fuel

    SciTech Connect

    Sekar, R.R.; Marr, W.W.; Cole, R.L.; Marciniak, T.J. ); Schaus, J.E. )

    1990-01-01

    The concept of oxygen enriched air applied to reciprocating engines is getting renewed attention in the context of the progress made in the enrichment methods and the tougher emissions regulations imposed on diesel and gasoline engines. An experimental project was completed in which a direct injection diesel engine was tested with intake oxygen levels of 21% -- 35%. Since an earlier study indicated that it is necessary to use a cheaper fuel to make the concept economically attractive, a less refined fuel was included in the test series. Since a major objection to the use of oxygen enriched combustion air had been the increase in NO{sub x} emissions, a method must be found to reduce NO{sub x}. Introduction of water into the engine combustion process was included in the tests for this purpose. Fuel emulsification with water was the means used here even though other methods could also be used. The teat data indicated a large increase in engine power density, slight improvement in thermal efficiency, significant reductions in smoke and particulate emissions and NO{sub x} emissions controllable with the addition of water. 15 refs., 10 figs., 2 tabs.

  5. Improving axion detection sensitivity in high purity germanium detector based experiments

    NASA Astrophysics Data System (ADS)

    Xu, Wenqin; Elliott, Steven

    2015-04-01

    Thanks to their excellent energy resolution and low energy threshold, high purity germanium (HPGe) crystals are widely used in low background experiments searching for neutrinoless double beta decay, e.g. the MAJORANA DEMONSTRATOR and the GERDA experiments, and low mass dark matter, e.g. the CDMS and the EDELWEISS experiments. A particularly interesting candidate for low mass dark matter is the axion, which arises from the Peccei-Quinn solution to the strong CP problem and has been searched for in many experiments. Due to axion-photon coupling, the postulated solar axions could coherently convert to photons via the Primakeoff effect in periodic crystal lattices, such as those found in HPGe crystals. The conversion rate depends on the angle between axions and crystal lattices, so the knowledge of HPGe crystal axis is important. In this talk, we will present our efforts to improve the HPGe experimental sensitivity to axions by considering the axis orientations in multiple HPGe crystals simultaneously. We acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program.

  6. Nitrate removal in stream ecosystems measured by 15N addition experiments: 2. Denitrification

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Sobota, Daniel; Dodds, Walter; Findlay, Stuart; Grimm, Nancy; Hamilton, Stephen; McDowell, William; O'Brien, Jon; Tank, Jennifer; Ashkenas, Linda; Cooper, Lee W; Dahm, Cliff; Gregory, Stanley; Johnson, Sherri; Meyer, Judy; Peterson, Bruce; Poole, Geoff; Valett, H. Maurice; Webster, Jackson; Arango, Clay; Beaulieu, Jake; Bernot, Melody; Burgin, Amy; Crenshaw, Chelsea; Helton, Ashley; Johnson, Laura; Niederlehner, Bobbie; Potter, Jody; Sheibley, Rich; Thomas, Suzanne

    2009-01-01

    We measured denitrification rates using a field {sup 15}N-NO{sub 3}{sup -} tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (S{sub Wden}) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N{sub 2} production rates far exceeded N{sub 2}O production rates in all streams. The fraction of total NO{sub 3}{sup -} removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NH{sub 4}{sup +} concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling S{sub Wden} were specific discharge (discharge/width) and NO{sub 3}{sup -} concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (U{sub den}) and NO{sub 3}{sup -} concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although U{sub den} increased with increasing NO{sub 3}{sup -} concentration, the efficiency of NO{sub 3}{sup -} removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO{sub 3}{sup -} load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO{sub 3}{sup -} concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO{sub 3}{sup -} concentration.

  7. Nitrate removal in stream ecosystems measured by 15N addition experiments: Denitrification

    USGS Publications Warehouse

    Mulholland, P.J.; Hall, R.O., Jr.; Sobota, D.J.; Dodds, W.K.; Findlay, S.E.G.; Grimm, N. B.; Hamilton, S.K.; McDowell, W.H.; O'Brien, J. M.; Tank, J.L.; Ashkenas, L.R.; Cooper, L.W.; Dahm, Clifford N.; Gregory, S.V.; Johnson, S.L.; Meyer, J.L.; Peterson, B.J.; Poole, G.C.; Valett, H.M.; Webster, J.R.; Arango, C.P.; Beaulieu, J.J.; Bernot, M.J.; Burgin, A.J.; Crenshaw, C.L.; Helton, A.M.; Johnson, L.T.; Niederlehner, B.R.; Potter, J.D.; Sheibley, R.W.; Thomasn, S.M.

    2009-01-01

    We measured denitrification rates using a field 15N-NO- 3 tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (SWden) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N2 production rates far exceeded N2O production rates in all streams. The fraction of total NO-3 removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NHz 4 concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling SWden were specific discharge (discharge / width) and NO-3 concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (Uden) and NO- 3 concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although Uden increased with increasing NO- 3 concentration, the efficiency of NO-3 removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO-3 load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO-3 concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO-3 concentration. ?? 2009.

  8. Sensitivity-enhanced IPAP experiments for measuring one-bond 13C '- 13C α and 13C α- 1H α residual dipolar couplings in proteins

    NASA Astrophysics Data System (ADS)

    Ding, Keyang; Gronenborn, Angela M.

    2004-04-01

    Sensitivity-enhanced 2D IPAP experiments using the accordion principle for measuring one-bond 13C '- 13C α and 1H α- 13C α dipolar couplings in proteins are presented. The resolution of the resulting spectra is identical to that of the decoupled HSQC spectra and the sensitivity of the corresponding 1D acquisitions are only slightly lower than those obtained with 3D HNCO and 3D HN(COCA)HA pulse sequences due to an additional delay 2 Δ. For cases of limited resolution in the 2D 15N- 1H N HSQC spectrum the current pulse sequences can easily be modified into 3D versions by introducing a poorly digitized third dimension, if so desired. The experiments described here are a valuable addition to the suites available for determination of residual dipolar couplings in biological systems.

  9. Use of Data Denial Experiments to Evaluate ESA Forecast Sensitivity Patterns

    SciTech Connect

    Zack, J; Natenberg, E J; Knowe, G V; Manobianco, J; Waight, K; Hanley, D; Kamath, C

    2011-09-13

    wind speed and vertical temperature difference. Ideally, the data assimilation scheme used in the experiments would have been based upon an ensemble Kalman filter (EnKF) that was similar to the ESA method used to diagnose the Mid-Colombia Basin sensitivity patterns in the previous studies. However, the use of an EnKF system at high resolution is impractical because of the very high computational cost. Thus, it was decided to use the three-dimensional variational analysis data assimilation that is less computationally intensive and more economically practical for generating operational forecasts. There are two tasks in the current project effort designed to validate the ESA observational system deployment approach in order to move closer to the overall goal: (1) Perform an Observing System Experiment (OSE) using a data denial approach which is the focus of this task and report; and (2) Conduct a set of Observing System Simulation Experiments (OSSE) for the Mid-Colombia basin region. The results of this task are presented in a separate report. The objective of the OSE task involves validating the ESA-MOOA results from the previous sensitivity studies for the Mid-Columbia Basin by testing the impact of existing meteorological tower measurements on the 0- to 6-hour ahead 80-m wind forecasts at the target locations. The testing of the ESA-MOOA method used a combination of data assimilation techniques and data denial experiments to accomplish the task objective.

  10. The analysis sensitivity to tropical winds from the Global Weather Experiment

    NASA Technical Reports Server (NTRS)

    Paegle, J.; Paegle, J. N.; Baker, W. E.

    1986-01-01

    The global scale divergent and rotational flow components of the Global Weather Experiment (GWE) are diagnosed from three different analyses of the data. The rotational flow shows closer agreement between the analyses than does the divergent flow. Although the major outflow and inflow centers are similarly placed in all analyses, the global kinetic energy of the divergent wind varies by about a factor of 2 between different analyses while the global kinetic energy of the rotational wind varies by only about 10 percent between the analyses. A series of real data assimilation experiments has been performed with the GLA general circulation model using different amounts of tropical wind data during the First Special Observing Period of the Global Weather Experiment. In exeriment 1, all available tropical wind data were used; in the second experiment, tropical wind data were suppressed; while, in the third and fourth experiments, only tropical wind data with westerly and easterly components, respectively, were assimilated. The rotational wind appears to be more sensitive to the presence or absence of tropical wind data than the divergent wind. It appears that the model, given only extratropical observations, generates excessively strong upper tropospheric westerlies. These biases are sufficiently pronounced to amplify the globally integrated rotational flow kinetic energy by about 10 percent and the global divergent flow kinetic energy by about a factor of 2. Including only easterly wind data in the tropics is more effective in controlling the model error than including only westerly wind data. This conclusion is especially noteworthy because approximately twice as many upper tropospheric westerly winds were available in these cases as easterly winds.

  11. Beta-carotene suppression of benzophenone-sensitized lipid peroxidation in hexane through additional chain-breaking activities

    NASA Astrophysics Data System (ADS)

    Cvetković, Dragan; Marković, Dejan

    2011-01-01

    The aim of this work is to estimate the antioxidant activity of β-carotene in the presence of two different mixtures of phospholipids in hexane solution, under continuous UV-irradiation from three different ranges (UV-A, UV-B, and UV-C). β-Carotene is employed to control lipid peroxidation process generated by UV-irradiation, in the presence and in the absence of selected photosensitizer, benzophenone, by scavenging the involved, created free radicals. The results show that β-carotene undergoes to a substantial, probably structural dependent destruction (bleaching), highly dependent on UV-photons energy input, more expressed in the presence than in the absence of benzophenone. The additional bleaching is synchronized with the further increase in β-carotene antioxidant activity in the presence of benzophenone, implying the same cause: increase in (phospholipids peroxidation) chain-breaking activities.

  12. Sediment fingerprinting experiments to test the sensitivity of multivariate mixing models

    NASA Astrophysics Data System (ADS)

    Gaspar, Leticia; Blake, Will; Smith, Hugh; Navas, Ana

    2014-05-01

    Sediment fingerprinting techniques provide insight into the dynamics of sediment transfer processes and support for catchment management decisions. As questions being asked of fingerprinting datasets become increasingly complex, validation of model output and sensitivity tests are increasingly important. This study adopts an experimental approach to explore the validity and sensitivity of mixing model outputs for materials with contrasting geochemical and particle size composition. The experiments reported here focused on (i) the sensitivity of model output to different fingerprint selection procedures and (ii) the influence of source material particle size distributions on model output. Five soils with significantly different geochemistry, soil organic matter and particle size distributions were selected as experimental source materials. A total of twelve sediment mixtures were prepared in the laboratory by combining different quantified proportions of the < 63 µm fraction of the five source soils i.e. assuming no fluvial sorting of the mixture. The geochemistry of all source and mixture samples (5 source soils and 12 mixed soils) were analysed using X-ray fluorescence (XRF). Tracer properties were selected from 18 elements for which mass concentrations were found to be significantly different between sources. Sets of fingerprint properties that discriminate target sources were selected using a range of different independent statistical approaches (e.g. Kruskal-Wallis test, Discriminant Function Analysis (DFA), Principal Component Analysis (PCA), or correlation matrix). Summary results for the use of the mixing model with the different sets of fingerprint properties for the twelve mixed soils were reasonably consistent with the initial mixing percentages initially known. Given the experimental nature of the work and dry mixing of materials, geochemical conservative behavior was assumed for all elements, even for those that might be disregarded in aquatic systems

  13. mGluR5 activation in the nucleus accumbens is not essential for sexual behavior or cross-sensitization of amphetamine responses by sexual experience.

    PubMed

    Pitchers, K K; Di Sebastiano, A R; Coolen, L M

    2016-08-01

    Natural rewards and psychostimulants cause similar neural plasticity in the nucleus accumbens (NAc). In addition, sexual experience in male rats causes increased locomotor activity and conditioned place preference (CPP) induced by d-Amphetamine (amph). The latter is dependent on a period of abstinence from sexual reward. In this study, the role of mGluR5 activation in the NAc for expression of mating and the cross-sensitizing effects of sexual experience was tested. First, intra-NAc infusions of mGluR5 antagonists MPEP (1 or 10 μg/μL) or MTEP (1 μg/μL) 15 min prior to mating during 4 daily sessions had no effect on male rat sexual behavior. Subsequently, these sexually experienced males were tested for amph-induced locomotor activity and CPP after one week of abstinence from sexual reward. In addition, sexually naïve males that received MPEP, MTEP or vehicle infusions prior to 4 daily handling sessions were included. Cross-sensitization of locomotion or CPP was not prevented by NAc mGluR5 antagonism during acquisition of sexual experience. Instead, sexually naive animals that received NAc mGluR5 antagonists without mating demonstrated sensitized amph-induced locomotor responses and enhanced CPP on par with sexually experienced males. Finally, we showed that sexual experience caused prolonged down-regulation of mGluR5 protein in the NAc, dependent on abstinence from sexual behavior. Together, these findings suggest that mGluR5 activation in the NAc is not essential for the expression of mating, but that experience-induced reduction in mGluR5 protein may contribute to the cross-sensitization of amph responses by sexual experience and abstinence. PMID:26946431

  14. A position-sensitive twin ionization chamber for fission fragment and prompt neutron correlation experiments

    NASA Astrophysics Data System (ADS)

    Göök, A.; Geerts, W.; Hambsch, F.-J.; Oberstedt, S.; Vidali, M.; Zeynalov, Sh.

    2016-09-01

    A twin position-sensitive Frisch grid ionization chamber, intended as a fission fragment detector in experiments to study prompt fission neutron correlations with fission fragment properties, is presented. Fission fragment mass and energies are determined by means of the double kinetic energy technique, based on conservation of mass and linear momentum. The position sensitivity is achieved by replacing each anode plate in the standard twin ionization chamber by a wire plane and a strip anode, both readout by means of resistive charge division. This provides information about the fission axis orientation, which is necessary to reconstruct the neutron emission process in the fully accelerated fragment rest-frame. The energy resolution compared to the standard twin ionization chamber is found not to be affected by the modification. The angular resolution of the detector relative to an arbitrarily oriented axis is better than 7° FWHM. Results on prompt fission neutron angular distributions in 235U(n,f) obtained with the detector in combination with an array of neutron scintillation detectors is presented as a proof of principle.

  15. The interaction of early life experiences with COMT val158met affects anxiety sensitivity.

    PubMed

    Baumann, C; Klauke, B; Weber, H; Domschke, K; Zwanzger, P; Pauli, P; Deckert, J; Reif, A

    2013-11-01

    The pathogenesis of anxiety disorders is considered to be multifactorial with a complex interaction of genetic factors and individual environmental factors. Therefore, the aim of this study was to examine gene-by-environment interactions of the genes coding for catechol-O-methyltransferase (COMT) and monoamine oxidase A (MAOA) with life events on measures related to anxiety. A sample of healthy subjects (N = 782; thereof 531 women; mean age M = 24.79, SD = 6.02) was genotyped for COMT rs4680 and MAOA-uVNTR (upstream variable number of tandem repeats), and was assessed for childhood adversities [Childhood Trauma Questionnaire (CTQ)], anxiety sensitivity [Anxiety Sensitivity Index (ASI)] and anxious apprehension [Penn State Worry Questionnaire (PSWQ)]. Main and interaction effects of genotype, environment and gender on measures related to anxiety were assessed by means of regression analyses. Association analysis showed no main gene effect on either questionnaire score. A significant interactive effect of childhood adversities and COMT genotype was observed: Homozygosity for the low-active met allele and high CTQ scores was associated with a significant increment of explained ASI variance [R(2) = 0.040, false discovery rate (FDR) corrected P = 0.04]. A borderline interactive effect with respect to MAOA-uVNTR was restricted to the male subgroup. Carriers of the low-active MAOA allele who reported more aversive experiences in childhood exhibited a trend for enhanced anxious apprehension (R(2) = 0.077, FDR corrected P = 0.10). Early aversive life experiences therefore might increase the vulnerability to anxiety disorders in the presence of homozygosity for the COMT 158met allele or low-active MAOA-uVNTR alleles. PMID:24118915

  16. Density functional investigation and some optical experiments on dye-sensitized quantum dots.

    PubMed

    Jain, Kalpna; Kaniyankandy, Sreejith; Kishor, Shyam; Josefsson, Ida; Ghosh, Hirendra N; Singh, Khundrakpam S; Mookerjee, Sumit; Odelius, Michael; Ramaniah, Lavanya M

    2015-11-21

    Dye-sensitized quantum dots (QDs) are promising candidates for dye-sensitized solar cells (DSSCs). Here, we report steady state (absorption and photoluminescence) optical measurements on several sizes of CdS QDs ligated with Coumarin 343 dye (C-343) and two different solvents, viz., chloroform and toluene. We further report detailed first principles density functional theory and time-dependent density functional theory studies of the geometric, electronic and optical (absorption and emission) properties of three different sized capped QDs, ligated with C-343 dye. The absorption spectrum shows a QD-size-independent peak, and another peak which shifts to blue with decrease in QD size. The first peak is found to arise from the dye molecule and the second one from the QD. Charge transfer using natural transition orbitals (NTOs) is found to occur from dye-to-QDs and is solvent-dependent. In the emission spectra, the luminescence intensity of the dye is quenched by the addition of the QD indicating a strong interaction between the QD and the dye. PMID:26445895

  17. Influence of Ethnic-Related Diversity Experiences on Intercultural Sensitivity of Students at a Public University in Malaysia

    ERIC Educational Resources Information Center

    Tamam, Ezhar; Abdullah, Ain Nadzimah

    2012-01-01

    In this study, the authors examine the influence of ethnic-related diversity experiences on intercultural sensitivity among Malaysian students at a multiethnic, multicultural and multilingual Malaysian public university. Results reveal a significant differential level of ethnic-related diversity experiences (but not at the level of intercultural…

  18. Increasing sensitivity of pulse EPR experiments using echo train detection schemes

    NASA Astrophysics Data System (ADS)

    Mentink-Vigier, F.; Collauto, A.; Feintuch, A.; Kaminker, I.; Tarle, V.; Goldfarb, D.

    2013-11-01

    Modern pulse EPR experiments are routinely used to study the structural features of paramagnetic centers. They are usually performed at low temperatures, where relaxation times are long and polarization is high, to achieve a sufficient Signal/Noise Ratio (SNR). However, when working with samples whose amount and/or concentration are limited, sensitivity becomes an issue and therefore measurements may require a significant accumulation time, up to 12 h or more. As the detection scheme of practically all pulse EPR sequences is based on the integration of a spin echo - either primary, stimulated or refocused - a considerable increase in SNR can be obtained by replacing the single echo detection scheme by a train of echoes. All these echoes, generated by Carr-Purcell type sequences, are integrated and summed together to improve the SNR. This scheme is commonly used in NMR and here we demonstrate its applicability to a number of frequently used pulse EPR experiments: Echo-Detected EPR, Davies and Mims ENDOR (Electron-Nuclear Double Resonance), DEER (Electron-Electron Double Resonance|) and EDNMR (Electron-Electron Double Resonance (ELDOR)-Detected NMR), which were combined with a Carr-Purcell-Meiboom-Gill (CPMG) type detection scheme at W-band. By collecting the transient signal and integrating a number of refocused echoes, this detection scheme yielded a 1.6-5 folds SNR improvement, depending on the paramagnetic center and the pulse sequence applied. This improvement is achieved while keeping the experimental time constant and it does not introduce signal distortion.

  19. Maximising the value of computer experiments using multi-method global sensitivity analysis

    NASA Astrophysics Data System (ADS)

    Pianosi, F.; Iwema, J.; Rosolem, R.; Wagener, T.

    2015-12-01

    Global Sensitivity Analysis (GSA) is increasingly recognised as an essential technique for a structured and quantitative approach to the calibration and diagnostic evaluation of environmental models. However, the implementation and interpretation of GSA is complicated by a number of choices that users need to make and for which multiple, equally sensible, options are often available. These choices include in the first place the choice of the GSA method, as well as many implementation details like the definition of the sampling space and strategy. The issue is exacerbated by computational complexity, in terms of both computing time and storage space needed to run the model, which might strongly constrain the number of experiments that can be afforded. While several algorithmic improvements can be adopted to reduce the computing burden of specific GSA methods, in this talk we discuss how a multi-method approach can be established to maximise the information gathered from an individual sample of model evaluations. Using as an example the GSA of a land surface model, we show how different analytical and approximation techniques can be applied sequentially to the same sample of model inputs and outputs, providing complimentary information about the model behaviour from different angles, and allowing for testing the impact of the choices made to generate the sample. We further expand our analysis to show how GSA is interconnected with model calibration and uncertainty analysis, so that a careful design of the simulation experiment can be used to address different questions simultaneously.

  20. Sensitivity experiments with a one-dimensional coupled plume - iceflow model

    NASA Astrophysics Data System (ADS)

    Beckmann, Johanna; Perette, Mahé; Alexander, David; Calov, Reinhard; Ganopolski, Andrey

    2016-04-01

    Over the last few decades Greenland Ice sheet mass balance has become increasingly negative, caused by enhanced surface melting and speedup of the marine-terminating outlet glaciers at the ice sheet margins. Glaciers speedup has been related, among other factors, to enhanced submarine melting, which in turn is caused by warming of the surrounding ocean and less obviously, by increased subglacial discharge. While ice-ocean processes potentially play an important role in recent and future mass balance changes of the Greenland Ice Sheet, their physical understanding remains poorly understood. In this work we performed numerical experiments with a one-dimensional plume model coupled to a one-dimensional iceflow model. First we investigated the sensitivity of submarine melt rate to changes in ocean properties (ocean temperature and salinity), to the amount of subglacial discharge and to the glacier's tongue geometry itself. A second set of experiments investigates the response of the coupled model, i.e. the dynamical response of the outlet glacier to altered submarine melt, which results in new glacier geometry and updated melt rates.

  1. Cognitive and psychomotor performance tests and experiment design in multiple chemical sensitivity.

    PubMed Central

    Wetherell, A

    1997-01-01

    People suffering from multiple chemical sensitivity (MCS) complain of a variety of symptoms that could impair cognitive and psychomotor function either directly or indirectly. This paper discusses the use of cognitive and psychomotor performance tests together with some experiment designs that could be considered for use to assess fitness of MCS sufferers for work or the efficacy of diagnostic, preventative, or therapeutic measures. The tests could also contribute to the body of objective information on MCS and help sway the opinion of those who are dubious of its authenticity. The credentials of cognitive and psychomotor performance tests are derived from their successful use in studying the effects of drugs, and the types of tests are illustrated by describing those used by the United Kingdom Defence Evaluation and Research Agency Chemical and Biological Defence Human Studies Group, which has been involved in the assessment of drugs and chemicals on work performance for many years. The tests include mathematical, verbal and spatial processing, tracking, reaction time, attention and vigilance, and memory tests. The discussion of experiment designs includes both repeated measures and parallel groups designs together with their advantages and disadvantages and some suggested modifications to accommodate the particular problems posed by MCS. PMID:9167986

  2. Effect of sodium acetate additive in successive ionic layer adsorption and reaction on the performance of CdS quantum-dot-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Liu, I.-Ping; Chen, Liang-Yih; Lee, Yuh-Lang

    2016-09-01

    Sodium acetate (NaAc) is utilized as an additive in cationic precursors of the successive ionic layer adsorption and reaction (SILAR) process to fabricate CdS quantum-dot (QD)-sensitized photoelectrodes. The effects of the NaAc concentration on the deposition rate and distribution of QDs in mesoporous TiO2 films, as well as on the performance of CdS-sensitized solar cells are studied. The experimental results show that the presence of NaAc can significantly accelerate the deposition of CdS, improve the QD distribution across photoelectrodes, and thereby, increase the performance of solar cells. These results are mainly attributed to the pH-elevation effect of NaAc to the cationic precursors which increases the electrostatic interaction of the TiO2 film to cadmium ions. The light-to-energy conversion efficiency of the CdS-sensitized solar cell increases with increasing concentration of the NaAc and approaches a maximum value (3.11%) at 0.05 M NaAc. Additionally, an ionic exchange is carried out on the photoelectrode to transform the deposited CdS into CdS1-xSex ternary QDs. The light-absorption range of the photoelectrode is extended and an exceptional power conversion efficiency of 4.51% is achieved due to this treatment.

  3. Sources of tropical Atlantic coupled model biases derived from initialised hindcasts and partially coupled sensitivity experiments

    NASA Astrophysics Data System (ADS)

    Deppenmeier, Anna-Lena; Hazeleger, Wilco; Haarsma, Rein; Prodhomme, Chloé; Exarchou, Eleftheria; Doblas-Reyes, Francisco J.

    2016-04-01

    State-of-the-art coupled general circulation models (CGCMs) still fail to simulate the mean state and variability of the tropical Atlantic (TA) climate correctly. We investigate the importance of air-sea interaction at different regions in the TA by means of performing partially coupled sensitivity experiments with the state-of-the-art CGCM EC-Earth3.1. All simulations are intialised from the observed climate state. By studying the initial drift in sensitivity experiments we obtain insight into the tropical dynamics and sources of model bias. We test the influence of realistic wind stress forcing over different regions of the TA on the development of SST as well as other oceanic biases. A series of hindcasts fully initialised in May and run until the end of August are performed with prescribed ERA-Interim zonal and meridional wind stresses over three different regions: firstly, we force the entire TA from 15N - 30S. Secondly, we force the equatorial band only between 5N - 5S, and finally we force the coastal area of the Angola Benguela upwelling region between 0W and the coast and between 5S - 30N. Our setup only affects the oceanic forcing and leaves the atmosphere free to adapt, such that we can identify the air-sea interaction processes in the different regions and their effect on the SST bias in the fully coupled system. The differences between forcing the entire TA and the equatorial region only are very small, which hints to the great importance of the relatively narrow equatorial region. The coastal upwelling area does not strongly affect the equatorial region in our model. We identify the equatorial band as most susceptible to errors in the wind stress forcing and, due to the strong atmosphere-ocean coupling, as source of the main biases in our model. The partially coupled experiments with initialised seasonal hindcasts appear to be a powerful tool to identify the sources of model biases and to identify relevant air-sea interaction processes in the TA.

  4. Increasing the sensitivity of PCR detection in bovine preputial smegma spiked with Tritrichomonas foetus by the addition of agar and resin.

    PubMed

    Chen, X G; Li, J

    2001-07-01

    Methods for the extraction of DNA from the preputial smegma of cattle infected with Tritrichomonas foetus for the purposes of polymerase chain reaction (PCR) detection are usually time-consuming, relatively insensitive and require hazardous chemicals. In order to solve these problems, we have developed a rapid, sensitive and harmless method to extract quality DNA from preputial smegma spiked with T. foetus. Results indicate that the addition of 5% Chelex-100 resin and 0.05% agar solution to the spiked smegma before the process of DNA extraction by the boiling method can significantly increase the sensitivity of PCR detection. This improved method may be suitable for routine DNA extraction for the diagnosis of cattle and even human trichomoniasis by PCR. PMID:11484853

  5. Regional modeling sensitivity experiments for interpreting the UK Winter 2013-2014 extreme rain

    NASA Astrophysics Data System (ADS)

    Omrani, H.; Vautard, R.; Schaller, N.; Allen, M. R.

    2015-12-01

    During the winter 2013/2014, the UK saw heavy rainfalls associated with a succession of storms reaching Southern England causing widespread flooding, power cuts and major disruptions to transport. The January precipitation set a record for several rain gauge stations in Southern England. The aim of this study is to evaluate the contribution of the anthropogenic climate change, represented by a modification of the sea surface temperature (SST) on the January precipitation. For that, we conducted a sensitivity experiment by running a set of 108 four-months simulations using WRF model with 9 different physics and 12 different SST fields; 9 for the factual world and 99 for the counter-factual world. A spectral nudging technique was used here to ensure a same atmospheric circulation patterns for all the simulations. Therefore, only the thermodynamic effect is considered here. The analysis is focused on January precipitation over the southern England. Results show for 0,5°C SST difference over the Northern Atlantic, the precipitation in the factual simulations is between 0,4 and 8% higher than the precipitation in the counter-factual simulations depending on the physic. A validation test shows that this value is closer to 8% for the "best physic" simulation. It also show a strong spatial variability where in some region the precipitation is higher in the counter-factual world compared the factual world. Finally, a backward trajectories were calculated to evaluate the sensitivity of the moisture sources and air mass trajectories to the SST in the factual and the counter-factual world.

  6. Reduced temperature sensitivity of soil respiration after a 17-year climate change experiment

    NASA Astrophysics Data System (ADS)

    Bond-Lamberty, B. P.; Bailey, V. L.; Fansler, S.; Liu, C.; Smith, J. L.; Bolton, H.

    2012-12-01

    In 1994, a reciprocal soil transplant experiment was initiated between two elevations (310 m, warmer and drier, and 844 m, cooler and wetter) on Rattlesnake Mountain in southeastern Washington, USA, testing whether the microbial and biochemical dynamics that developed under cool, moist conditions would be destabilized under hot, dry conditions. In March 2012 we resampled the original transplanted soils to study longer-term changes in microbial community composition, soil C and N dynamics, and soil physical structure. These resampled cores were randomly assigned to climate-control chambers simulating the lower or upper site climates. We measured respiration throughout a 100-day incubation, coupled with biogeochemical analyses, to examine how these soils had responded to environmental changes over 17 years. Temperature and soil moisture were the primary drivers of CO2 evolution, but transplant source and destination both exerted significant effects. Most strikingly, respiration from cores originally from the hotter, low-elevation site that spent 17 years at the upper site exhibited almost no temperature sensitivity (Q10=1.07, 13-33 °C). Cores from the upper site had more carbon (~1.1% versus 0.8%), but equivalent C:N ratios, while soils incubated in the 'upper' chamber had greater N-acetylglucosaminidase and β-glucosidase potentials. Tomographic reconstructions revealed that porosity, moisture content, grain size distribution, and organic C were highly heterogeneous, consistent with the observed macro-scale variability. These results suggest that the upper-site soils were more resilient to the 1994 transplant, but that there is a significantly altered microbial community in the transplanted soils, particularly the lower-to-upper cores, that has not recovered almost two decades after the original experiment. This raises more general questions of how current climate change will affect soil resistance to future perturbations, and how confidently we can model this

  7. Identification of carbonates as additives in pressure-sensitive adhesive tape substrate with Fourier transform infrared spectroscopy (FTIR) and its application in three explosive cases.

    PubMed

    Lv, Jungang; Feng, Jimin; Zhang, Wen; Shi, Rongguang; Liu, Yong; Wang, Zhaohong; Zhao, Meng

    2013-01-01

    Pressure-sensitive tape is often used to bind explosive devices. It can become important trace evidence in many cases. Three types of calcium carbonate (heavy, light, and active CaCO(3)), which were widely used as additives in pressure-sensitive tape substrate, were analyzed with Fourier transform infrared spectroscopy (FTIR) in this study. A Spectrum GX 2000 system with a diamond anvil cell and a deuterated triglycine sulfate detector was employed for IR observation. Background was subtracted for every measurement, and triplicate tests were performed. Differences in positions of main peaks and the corresponding functional groups were investigated. Heavy CaCO(3) could be identified from the two absorptions near 873 and 855/cm, while light CaCO(3) only has one peak near 873/cm because of the low content of aragonite. Active CaCO(3) could be identified from the absorptions in the 2800-2900/cm region because of the existence of organic compounds. Tiny but indicative changes in the 878-853/cm region were found in the spectra of CaCO(3) with different content of aragonite and calcite. CaCO(3) in pressure-sensitive tape, which cannot be differentiated by scanning electron microscope/energy dispersive X-ray spectrometer and thermal analysis, can be easily identified using FTIR. The findings were successfully applied to three specific explosive cases and would be helpful in finding the possible source of explosive devices in future cases. PMID:22724657

  8. On the Juno radio science experiment: models, algorithms and sensitivity analysis

    NASA Astrophysics Data System (ADS)

    Tommei, G.; Dimare, L.; Serra, D.; Milani, A.

    2015-01-01

    Juno is a NASA mission launched in 2011 with the goal of studying Jupiter. The probe will arrive to the planet in 2016 and will be placed for one year in a polar high-eccentric orbit to study the composition of the planet, the gravity and the magnetic field. The Italian Space Agency (ASI) provided the radio science instrument KaT (Ka-Band Translator) used for the gravity experiment, which has the goal of studying the Jupiter's deep structure by mapping the planet's gravity: such instrument takes advantage of synergies with a similar tool in development for BepiColombo, the ESA cornerstone mission to Mercury. The Celestial Mechanics Group of the University of Pisa, being part of the Juno Italian team, is developing an orbit determination and parameters estimation software for processing the real data independently from NASA software ODP. This paper has a twofold goal: first, to tell about the development of this software highlighting the models used, secondly, to perform a sensitivity analysis on the parameters of interest to the mission.

  9. Development and validation of an evaporation duct model. Part I: Model establishment and sensitivity experiments

    NASA Astrophysics Data System (ADS)

    Ding, Juli; Fei, Jianfang; Huang, Xiaogang; Cheng, Xiaoping; Hu, Xiaohua; Ji, Liang

    2015-06-01

    Based on the Coupled Ocean-Atmospheric Response Experiment (COARE) bulk algorithm and the Naval Postgraduate School (NPS) model, a universal evaporation duct (UED) model that can flexibly accommodate the latest improvements in component (such as stability function, velocity roughness, and scalar roughness) schemes for different stratification and wind conditions, is proposed in this paper. With the UED model, the sensitivity of the model-derived evaporation duct height (EDH) to stability function ( ψ), ocean wave effect under moderate to high wind speeds, and scalar roughness length parameterization, is investigated, and relative contributions of these factors are compared. The results show that the stability function is a key factor influencing the simulated EDH values. Under unstable conditions, the EDH values from stability functions of Fairall et al. (1996) and Hu and Zhang (1992) are generally higher than those from others; while under stable conditions, unreasonably high EDHs can be avoided by use of the stability functions of Hu and Zhang (1992) and Grachev et al. (2007). Under moderate to high wind speeds, the increase in velocity roughness length z 0 due to consideration of the true ocean wave effect acts to reduce modeled EDH values; this trend is more pronounced under stable conditions. Although the scalar roughness length parameterization has a minor effect on the model-derived EDH, a positive correlation is found between the scalar roughness length z 0 q and the model-derived EDH.

  10. Sensitivity Evaluation of the Daily Thermal Predictions of the AGR-1 Experiment in the Advanced Test Reactor

    SciTech Connect

    Grant Hawkes; James Sterbentz; John Maki

    2011-05-01

    A temperature sensitivity evaluation has been performed for the AGR-1 fuel experiment on an individual capsule. A series of cases were compared to a base case by varying different input parameters into the ABAQUS finite element thermal model. These input parameters were varied by ±10% to show the temperature sensitivity to each parameter. The most sensitive parameters are the outer control gap distance, heat rate in the fuel compacts, and neon gas fraction. Thermal conductivity of the compacts and graphite holder were in the middle of the list for sensitivity. The smallest effects were for the emissivities of the stainless steel, graphite, and thru tubes. Sensitivity calculations were also performed varying with fluence. These calculations showed a general temperature rise with an increase in fluence. This is a result of the thermal conductivity of the fuel compacts and graphite holder decreasing with fluence.

  11. Ground-based experiments complement microgravity flight opportunities in the investigation of the effects of space flight on the immune response: is protein kinase C gravity sensitive?

    NASA Technical Reports Server (NTRS)

    Chapes, S. K.; Woods, K. M.; Armstrong, J. W.; Spooner, B. S. (Principal Investigator)

    1993-01-01

    This manuscript briefly reviews ground-based and flight experiments, discusses how those experiments complement each other, and details how those experiments lead us to speculate about the gravity-sensitive nature of protein kinase C.

  12. Status and Future Sensitivities from the νμ Disappearance Analysis in the NOvA Experiment

    NASA Astrophysics Data System (ADS)

    Baird, Michael; NOvA Collaboration

    2015-04-01

    The NOvA experiment is a long-baseline neutrino oscillation experiment based out of Fermilab. It uses the newly upgraded NuMI beam line with two liquid scintillator detectors, one at Fermilab and a second 14 kton detector in northern Minnesota. The νμ disappearance analysis can significantly improve the world's best measurement of sin2(2θ23) . Presented here is the status of this analysis as well as future sensitivities.

  13. The sensitivity of past and near-future lunar radio experiments to ultra-high-energy cosmic rays and neutrinos

    NASA Astrophysics Data System (ADS)

    Bray, J. D.

    2016-04-01

    Various experiments have been conducted to search for the radio emission from ultra-high-energy (UHE) particles interacting in the lunar regolith. Although they have not yielded any detections, they have been successful in establishing upper limits on the flux of these particles. I present a review of these experiments in which I re-evaluate their sensitivity to radio pulses, accounting for effects which were neglected in the original reports, and compare them with prospective near-future experiments. In several cases, I find that past experiments were substantially less sensitive than previously believed. I apply existing analytic models to determine the resulting limits on the fluxes of UHE neutrinos and cosmic rays (CRs). In the latter case, I amend the model to accurately reflect the fraction of the primary particle energy which manifests in the resulting particle cascade, resulting in a substantial improvement in the estimated sensitivity to CRs. Although these models are in need of further refinement, in particular to incorporate the effects of small-scale lunar surface roughness, their application here indicates that a proposed experiment with the LOFAR telescope would test predictions of the neutrino flux from exotic-physics models, and an experiment with a phased-array feed on a large single-dish telescope such as the Parkes radio telescope would allow the first detection of CRs with this technique, with an expected rate of one detection per 140 h.

  14. Reflexive Positioning in a Politically Sensitive Situation: Dealing with the Threats of Researching the West Bank Settler Experience

    ERIC Educational Resources Information Center

    Possick, Chaya

    2009-01-01

    For the past 7 years, the author has conducted qualitative research projects revolving around the experiences of West Bank settlers. The political situation in Israel in general, and the West Bank in particular, has undergone rapid and dramatic political, military, and social changes during this period. In highly politically sensitive situations…

  15. Intra-Articular Corticosteroids in Addition to Exercise for Reducing Pain Sensitivity in Knee Osteoarthritis: Exploratory Outcome from a Randomized Controlled Trial

    PubMed Central

    Soriano-Maldonado, Alberto; Klokker, Louise; Bartholdy, Cecilie; Bandak, Elisabeth; Ellegaard, Karen; Bliddal, Henning; Henriksen, Marius

    2016-01-01

    Objective To assess the effects of one intra-articular corticosteroid injection two weeks prior to an exercise-based intervention program for reducing pain sensitivity in patients with knee osteoarthritis (OA). Design Randomized, masked, parallel, placebo-controlled trial involving 100 participants with clinical and radiographic knee OA that were randomized to one intra-articular injection on the knee with either 1 ml of 40 mg/ml methylprednisolone (corticosteroid) dissolved in 4 ml lidocaine (10 mg/ml) or 1 ml isotonic saline (placebo) mixed with 4 ml lidocaine (10 mg/ml). Two weeks after the injections all participants undertook a 12-week supervised exercise program. Main outcomes were changes from baseline in pressure-pain sensitivity (pressure-pain threshold [PPT] and temporal summation [TS]) assessed using cuff pressure algometry on the calf. These were exploratory outcomes from a randomized controlled trial. Results A total of 100 patients were randomized to receive either corticosteroid (n = 50) or placebo (n = 50); 45 and 44, respectively, completed the trial. Four participants had missing values for PPT and one for TS at baseline; thus modified intention-to-treat populations were analyzed. The mean group difference in changes from baseline at week 14 was 0.6 kPa (95% CI: -1.7 to 2.8; P = 0.626) for PPT and 384 mm×sec (95% CI: -2980 to 3750; P = 0.821) for TS. Conclusions These results suggest that adding intra-articular corticosteroid injection 2 weeks prior to an exercise program does not provide additional benefits compared to placebo in reducing pain sensitivity in patients with knee OA. Trial Registration EU clinical trials (EudraCT): 2012-002607-18 PMID:26871954

  16. Effects of zinc additions on the stress corrosion crack growth rate of sensitized stainless steel, Alloy 600 and Alloy 182 weld metal in 288 C water

    SciTech Connect

    Andresen, P.L.; Angeliu, T.M.

    1995-09-01

    ZnO additions to boiling water reactor (BWR) water have been the focus of recent interest, primarily because of their beneficial influence in reducing buildup of radioactive species such as Co{sup 60} in the oxide film of structural components, e.g., stainless steel piping. The effect of ZnO additions on stress corrosion crack growth rates were studied using 1T CT fracture mechanics specimens of sensitized type 304 stainless steel, sensitized Alloy 600, and Alloy 182 weld metal exposed to {approx}288 C water containing various levels of dissolved oxygen and impurities. Zn levels of 5 to 100 ppb Zn{sup 2+} were evaluated and found to reduce crack growth rates for all materials and in all water chemistries. Many Zn tests involved long term exposure and were performed at somewhat reduced corrosion potential (e.g., from {approx}+200 to 0 {minus}+50 mV{sub she}); variations in corrosion potential from +200, to +50, to {minus}50 mV{sub she} clearly had an important effect. The benefit of Zn appeared to be most pronounced when the growth rate was decreased (e.g., by corrosion potential). This was consistent with the findings of mechanistic studies, which showed that Zn decreased the repassivation response at times >10{sup 4} s, which is associated with low crack tip strain rates, i.e., low growth rates. Reduced corrosion potentials are also expected to directly effect Zn, since high (crack mouth) corrosion potentials inhibit the transport of Zn{sup 2+} into the crack. Zn also increased the fracture strain of the oxide on stainless steel, and may also reduce crack growth rates by increasing the pH in the crack. Similar benefits are expected for other structural materials, such as nonsensitized or irradiated stainless steel, carbon steel, low alloy steel, and other nickel alloys.

  17. High-sensitivity measurement of 3He-4He isotopic ratios for ultracold neutron experiments

    NASA Astrophysics Data System (ADS)

    Mumm, H. P.; Huber, M. G.; Bauder, W.; Abrams, N.; Deibel, C. M.; Huffer, C. R.; Huffman, P. R.; Schelhammer, K. W.; Janssens, R.; Jiang, C. L.; Scott, R. H.; Pardo, R. C.; Rehm, K. E.; Vondrasek, R.; Swank, C. M.; O'Shaughnessy, C. M.; Paul, M.; Yang, L.

    2016-06-01

    Research efforts ranging from studies of solid helium to searches for a neutron electric dipole moment require isotopically purified helium with a ratio of 3He to 4He at levels below that which can be measured using traditional mass spectroscopy techniques. We demonstrate an approach to such a measurement using accelerator mass spectroscopy, reaching the 10-14 level of sensitivity, several orders of magnitude more sensitive than other techniques. Measurements of 3He/4He in samples relevant to the measurement of the neutron lifetime indicate the need for substantial corrections. We also argue that there is a clear path forward to sensitivity increases of at least another order of magnitude.

  18. Determination of Unknown Concentrations of Sodium Acetate Using the Method of Standard Addition and Proton NMR: An Experiment for the Undergraduate Analytical Chemistry Laboratory

    ERIC Educational Resources Information Center

    Rajabzadeh, Massy

    2012-01-01

    In this experiment, students learn how to find the unknown concentration of sodium acetate using both the graphical treatment of standard addition and the standard addition equation. In the graphical treatment of standard addition, the peak area of the methyl peak in each of the sodium acetate standard solutions is found by integration using…

  19. Interpretation of Transport Experiments in Porous Media: Evaluation of Different Formulations via Sensitivity-Based Parameter Calibration

    NASA Astrophysics Data System (ADS)

    Ciriello, V.; Guadagnini, A.; Di Federico, V.; Edery, Y.; Berkowitz, B.

    2013-12-01

    We illustrate a general strategy to (a) calibrate the parameters embedded in competing mathematical models employed to interpret laboratory scale tracer experiments in porous media, (b) rank these alternative models, and (c) estimate the relative degree of likelihood of each model through a posterior probability weight. As an example of application, we consider the interpretation of the conservative and reactive transport experiments of Gramling et al. [2002]. For the interpretation of the conservative experiment three competitive one-dimensional models, i.e., (i) the advection-dispersion equation, (ii) a double porosity formulation, and (iii) the Continuous Time Random Walk are selected. The reactive transport experiment is analyzed by comparing (i) a formulation of the advection-dispersion reaction equation, and (ii) the Continuous Time Random Walk. The methodological framework is based on the joint use of global sensitivity analysis and model discrimination criteria and is fully consistent with Maximum Likelihood methods which are typically employed for groundwater flow and transport model calibration. Global sensitivity analysis is performed via the Polynomial Chaos Expansion approach, providing a minimum set of observations corresponding to the most sensitive (space-time) locations for each of a suite of selected transport formulations. This is accomplished by considering model calibration parameters as sources of uncertainty and treating them as independent random variables. Quantification of the most sensitive locations has strong implications for experiment design, while global sensitivity analysis allows identification of the relative importance of the parameters involved in model calibration practice. Model quality criteria are then employed to assess the capability of each model to approximate its most sensitive observations. Validation against the entire available dataset allows testing of the predictive performance of each selected model. Contrasting

  20. Sensitivity of urban rainfall to anthropogenic heat flux: A numerical experiment

    NASA Astrophysics Data System (ADS)

    Holst, Christopher Claus; Tam, Chi-Yung; Chan, Johnny C. L.

    2016-03-01

    In this paper we investigate the sensitivity of local precipitation statistics to surface heat fluxes in an urban subdomain in the Pearl River Delta region, which is situated along the coast of south China. By conducting simulations of a past record-breaking rainfall event with a cloud-resolving model, we found that rainfall rates and the spatial distribution of accumulated rainfall are very sensitive to imposed urban surface heat fluxes. Diagnostics of the planetary boundary layer show increasing fluctuations of turbulence and buoyant turbulence production with increasing surface heat emission, causing increased near-surface mixing and convection. Heavy precipitation rates show a higher sensitivity than lighter rates. The extreme tail of the distribution is hence more affected. This study serves as an example of how sensitive the magnitude of local high impact weather phenomena can be to local forcing.

  1. Sensitivity of the High Altitude Water Cherenkov Experiment to observe Gamma-Ray Bursts

    NASA Astrophysics Data System (ADS)

    González, M. M.

    Ground based telescopes have marginally observed very high energy emission (>100GeV) from gamma-ray bursts(GRB). For instance, Milagrito observed GRB970417a with a significance of 3.7 sigmas over the background. Milagro have not yet observed TeV emission from a GRB with its triggered and untriggered searches or GeV emission with a triggered search using its scalers. These results suggest the need of new observatories with higher sensitivity to transient sources. The HAWC (High Altitute Water Cherenkov) observatory is proposed as a combination of the Milagro tecnology with a very high altitude (>4000m over see level) site. The expected HAWC sensitivity for GRBs is at least >10 times the Milagro sensitivity. In this work HAWC sensitivity for GRBs is discussed for different detector configurations such as altitude, distance between PMTs, depth under water of PMTs, number of PMTs required for a trigger, etc.

  2. Sensitivity enhancement of surface thermal lens technique with a short-wavelength probe beam: Experiment

    SciTech Connect

    Zhang, Xiaorong; Li, Bincheng

    2015-02-15

    Surface thermal lens is a highly sensitive photothermal technique to measure low absorption losses of various solid materials. In such applications, the sensitivity of surface thermal lens is a key parameter for measuring extremely low absorption. In this paper, we experimentally investigated the influence of probe beam wavelength on the sensitivity of surface thermal lens for measuring the low absorptance of optical laser components. Three probe lasers with wavelength 375 nm, 633 nm, and 1570 nm were used, respectively, to detect the surface thermal lens amplitude of a highly reflective coating sample excited by a cw modulated Gaussian beam at 1064 nm. The experimental results showed that the maximum amplitude of surface thermal lens signal obtained at corresponding optimized detection distance was inversely proportional to the wavelength of the probe beam, as predicted by previous theoretical model. The sensitivity of surface thermal lens could, therefore, be improved by detecting surface thermal lens signal with a short-wavelength probe beam.

  3. Cisapride a green analytical reagent for rapid and sensitive determination of bromate in drinking water, bread and flour additives by oxidative coupling spectrophotometric methods

    NASA Astrophysics Data System (ADS)

    Al Okab, Riyad Ahmed

    2013-02-01

    Green analytical methods using Cisapride (CPE) as green analytical reagent was investigated in this work. Rapid, simple, and sensitive spectrophotometric methods for the determination of bromate in water sample, bread and flour additives were developed. The proposed methods based on the oxidative coupling between phenoxazine and Cisapride in the presence of bromate to form red colored product with max at 520 nm. Phenoxazine and Cisapride and its reaction products were found to be environmentally friendly under the optimum experimental condition. The method obeys beers law in concentration range 0.11-4.00 g ml-1 and molar absorptivity 1.41 × 104 L mol-1 cm-1. All variables have been optimized and the presented reaction sequences were applied to the analysis of bromate in water, bread and flour additive samples. The performance of these method was evaluated in terms of Student's t-test and variance ratio F-test to find out the significance of proposed methods over the reference method. The combination of pharmaceutical drugs reagents with low concentration create some unique green chemical analyses.

  4. Cisapride a green analytical reagent for rapid and sensitive determination of bromate in drinking water, bread and flour additives by oxidative coupling spectrophotometric methods.

    PubMed

    Al Okab, Riyad Ahmed

    2013-02-15

    Green analytical methods using Cisapride (CPE) as green analytical reagent was investigated in this work. Rapid, simple, and sensitive spectrophotometric methods for the determination of bromate in water sample, bread and flour additives were developed. The proposed methods based on the oxidative coupling between phenoxazine and Cisapride in the presence of bromate to form red colored product with max at 520 nm. Phenoxazine and Cisapride and its reaction products were found to be environmentally friendly under the optimum experimental condition. The method obeys beers law in concentration range 0.11-4.00 g ml(-1) and molar absorptivity 1.41 × 10(4) L mol(-1)cm(-1). All variables have been optimized and the presented reaction sequences were applied to the analysis of bromate in water, bread and flour additive samples. The performance of these method was evaluated in terms of Student's t-test and variance ratio F-test to find out the significance of proposed methods over the reference method. The combination of pharmaceutical drugs reagents with low concentration create some unique green chemical analyses. PMID:23261631

  5. New SCALE Sensitivity/Uncertainty Capabilities Applied to Bias Estimation and to Design of MIRTE Reference Experiments

    SciTech Connect

    Rearden, Bradley T; Duhamel, Isabelle; Letang, Eric

    2009-01-01

    New TSUNAMI tools of SCALE 6, TSURFER and TSAR, are demonstrated to examine the bias effects of small-worth test materials, relative to reference experiments. TSURFER is a data adjustment bias and bias uncertainty assessment tool, and TSAR computes the sensitivity of the change in reactivity between two systems to the cross-section data common to their calculation. With TSURFER, it is possible to examine biases and bias uncertainties in fine detail. For replacement experiments, the application of TSAR to TSUNAMI-3D sensitivity data for pairs of experiments allows the isolation of sources of bias that could otherwise be obscured by materials with more worth in an individual experiment. The application of TSUNAMI techniques in the design of nine reference experiments for the MIRTE program will allow application of these advanced techniques to data acquired in the experimental series. The validation of all materials in a complex criticality safety application likely requires consolidating information from many different critical experiments. For certain materials, such as structural materials or fission products, only a limited number of critical experiments are available, and the fuel and moderator compositions of the experiments may differ significantly from those of the application. In these cases, it is desirable to extract the computational bias of a specific material from an integral keff measurement and use that information to quantify the bias due to the use of the same material in the application system. Traditional parametric and nonparametric methods are likely to prove poorly suited for such a consolidation of specific data components from a diverse set of experiments. An alternative choice for consolidating specific data from numerous sources is a data adjustment tool, like the ORNL tool TSURFER (Tool for Sensitivity/Uncertainty analysis of Response Functionals using Experimental Results) from SCALE 6.1 However, even with TSURFER, it may be difficult to

  6. Warfarin Sensitivity Genotyping: A Review of the Literature and Summary of Patient Experience

    PubMed Central

    Moyer, Thomas P.; O'Kane, Dennis J.; Baudhuin, Linnea M.; Wiley, Carmen L.; Fortini, Alexandre; Fisher, Pamela K.; Dupras, Denise M.; Chaudhry, Rajeev; Thapa, Prabin; Zinsmeister, Alan R.; Heit, John A.

    2009-01-01

    The antithrombotic benefits of warfarin are countered by a narrow therapeutic index that contributes to excessive bleeding or cerebrovascular clotting and stroke in some patients. This article reviews the current literature describing warfarin sensitivity genotyping and compares the results of that review to the findings of our study in 189 patients at Mayo Clinic conducted between June 2001 and April 2003. For the review of the literature, we identified relevant peer-reviewed articles by searching the Web of Knowledge using key word warfarin-related adverse event. For the 189 Mayo Clinic patients initiating warfarin therapy to achieve a target international normalized ratio (INR) in the range of 2.0 to 3.5, we analyzed the CYP2C9 (cytochrome P450 2C9) and VKORC1 (vitamin K epoxide reductase complex, subunit 1) genetic loci to study the relationship among the initial warfarin dose, steady-state dose, time to achieve steady-state dose, variations in INR, and allelic variance. Results were compared with those previously reported in the literature for 637 patients. The relationships between allelic variants and warfarin sensitivity found in our study of Mayo Clinic patients are fundamentally the same as in those reported by others. The Mayo Clinic population is predominantly white and shows considerable allelic variability in CYP2C9 and VKORC1. Certain of these alleles are associated with increased sensitivity to warfarin. Polymorphisms in CYP2C9 and VKORC1 have a considerable effect on warfarin dose in white people. A correlation between steady-state warfarin dose and allelic variants of CYP2C9 and VKORC1 has been demonstrated by many previous reports and is reconfirmed in this report. The allelic variants found to most affect warfarin sensitivity are CYP2C9*1*1-VKORC1BB (less warfarin sensitivity than typical); CYP2C9*1*1-VKORC1AA (considerable variance in INR throughout initiation); CYP2C9*1*2-VKORC1AB (more sensitivity to warfarin than typical); CYP2C9*1*3-VKORC1

  7. Sensitivity and representativity analysis of past experiments with respect to ABTR system.

    SciTech Connect

    Aliberti, G.; Palmiotti, G.; Salvatores, M.

    2007-08-29

    A comprehensive validation analysis has been performed that incorporates representativity of multiple parameters, experiments, reference designs, and adjustment of the nuclear data. The work involves a new representativity study among selected reactor designs and several experiments. Application, using existing experiments, to reference design like the ABTR and the SFR has demonstrated that it is possible to achieve a significant reduction of uncertainty on the main integral parameters of interest for their neutronic design. This is possible when the set of available experiments are relevant (i.e. representative of the reference designs), of good quality (i.e. of reduced uncertainty on experimental results), and consistent (i.e. not providing conflictive information).

  8. A Sensitive and Robust Enzyme Kinetic Experiment Using Microplates and Fluorogenic Ester Substrates

    ERIC Educational Resources Information Center

    Johnson, R. Jeremy; Hoops, Geoffrey C.; Savas, Christopher J.; Kartje, Zachary; Lavis, Luke D.

    2015-01-01

    Enzyme kinetics measurements are a standard component of undergraduate biochemistry laboratories. The combination of serine hydrolases and fluorogenic enzyme substrates provides a rapid, sensitive, and general method for measuring enzyme kinetics in an undergraduate biochemistry laboratory. In this method, the kinetic activity of multiple protein…

  9. Decay Kinetics of UV-Sensitive Materials: An Introductory Chemistry Experiment

    ERIC Educational Resources Information Center

    Via, Garrhett; Williams, Chelsey; Dudek, Raymond; Dudek, John

    2015-01-01

    First-order kinetic decay rates can be obtained by measuring the time-dependent reflection spectra of ultraviolet-sensitive objects as they returned from their excited, colored state back to the ground, colorless state. In this paper, a procedure is described which provides an innovative and unique twist on standard, undergraduate, kinetics…

  10. Age-Sensitive Effect of Adolescent Dating Experience on Delinquency and Substance Use

    ERIC Educational Resources Information Center

    Kim, Ryang Hui

    2013-01-01

    This study uses a developmental perspective and focuses on examining whether the impact of adolescent dating is age-sensitive. Dating at earlier ages is hypothesized to have a stronger effect on adolescent criminal behavior or substance use, but the effect would be weaker as one ages. The data obtained from the National Longitudinal Survey of…

  11. Vibration isolation technology: Sensitivity of selected classes of experiments to residual accelerations

    NASA Technical Reports Server (NTRS)

    Alexander, J. Iwan D.

    1991-01-01

    Work was completed on all aspects of the following tasks: order of magnitude estimates; thermo-capillary convection - two-dimensional (fixed planar surface); thermo-capillary convection - three-dimensional and axisymmetric; liquid bridge/floating zone sensitivity; transport in closed containers; interaction: design and development stages; interaction: testing flight hardware; and reporting. Results are included in the Appendices.

  12. Aggressive experience affects the sensitivity of neurons towards pharmacological treatment in the hypothalamic attack area.

    PubMed

    Haller, J; Abrahám, I; Zelena, D; Juhász, G; Makara, G B; Kruk, M R

    1998-09-01

    Early investigators of brain stimulation-evoked complex behaviours (attack, escape, feeding, self-grooming, sexual behaviour) reported that experience may affect the behavioural outcome of brain stimulation. This intriguing example of functional neuronal plasticity was later totally neglected. The present experiment investigated the behavioural outcome of in vivo microdialysis perfusion of the glutamate agonist kainate and/or the GABAA antagonist bicuculline into the hypothalamic attack area (HAA) of (1) animals naive to dyadic encounters; (2) animals with a recent aggressive experience (the probe being implanted 6-24 h after the last of a series of dyadic encounters); and (3) animals with an earlier aggressive experience (probe being implanted 2 weeks after the last aggressive experience). On the experimental day, rats received two 5-min infusions during a dyadic encounter lasting 35 min with an unknown opponent. Flow rate was 1.5-2 microliters/min, drug concentrations were 1.8 x 10(-5) and 1.5 x 10(-5) M for kainate and bicuculline, respectively. Behaviour was analysed before, during and after perfusions. Only the combined kainate + bicuculline treatment had significant effects on behaviour at the doses studied. A significant increase in aggressive behaviour was elicited only in animals with a recent aggressive experience, while naive animals and with an earlier experience responded to the treatments by grooming. These results appear to support early observations indicating that one important aspect of brain stimulation effects is previous experience. PMID:9832932

  13. Teaching examples for the design of experiments: geographical sensitivity and the self-fulfilling prophecy.

    PubMed

    Lendrem, Dennis W; Lendrem, B Clare; Rowland-Jones, Ruth; D'Agostino, Fabio; Linsley, Matt; Owen, Martin R; Isaacs, John D

    2016-01-01

    Many scientists believe that small experiments, guided by scientific intuition, are simpler and more efficient than design of experiments. This belief is strong and persists even in the face of data demonstrating that it is clearly wrong. In this paper, we present two powerful teaching examples illustrating the dangers of small experiments guided by scientific intuition. We describe two, simple, two-dimensional spaces. These two spaces give rise to, and at the same time appear to generate supporting data for, scientific intuitions that are deeply flawed or wholly incorrect. We find these spaces useful in unfreezing scientific thinking and challenging the misplaced confidence in scientific intuition. PMID:26559516

  14. Use of Taguchi Design of Experiments to Determine ALPLS Ascent Delta-5 Sensitivities and Total Mass Sensitivities to Release Conditions and Vehicle Parameters

    NASA Technical Reports Server (NTRS)

    Carrasco, Hector Ramon

    1991-01-01

    The objective of this study is to evaluate the use of Taguchi's Design of Experiment Methods to improve the effectiveness of this and future parametric studies. Taguchi Methods will be applied in addition to the typical approach to provide a mechanism for comparing the results and the cost or effort necessary to complete the studies. It is anticipated that results of this study should include an improved systematic analysis process, an increase in information obtained at a lower cost, and a more robust, cost effective vehicle design.

  15. Glucagon sensitivity and clearance in type 1 diabetes: insights from in vivo and in silico experiments.

    PubMed

    Hinshaw, Ling; Mallad, Ashwini; Dalla Man, Chiara; Basu, Rita; Cobelli, Claudio; Carter, Rickey E; Kudva, Yogish C; Basu, Ananda

    2015-09-01

    Glucagon use in artificial pancreas for type 1 diabetes (T1D) is being explored for prevention and rescue from hypoglycemia. However, the relationship between glucagon stimulation of endogenous glucose production (EGP) viz., hepatic glucagon sensitivity, and prevailing glucose concentrations has not been examined. To test the hypothesis that glucagon sensitivity is increased at hypoglycemia vs. euglycemia, we studied 29 subjects with T1D randomized to a hypoglycemia or euglycemia clamp. Each subject was studied at three glucagon doses at euglycemia or hypoglycemia, with EGP measured by isotope dilution technique. The peak EGP increments and the integrated EGP response increased with increasing glucagon dose during euglycemia and hypoglycemia. However, the difference in dose response based on glycemia was not significant despite higher catecholamine concentrations in the hypoglycemia group. Knowledge of glucagon's effects on EGP was used to develop an in silico glucagon action model. The model-derived output fitted the obtained data at both euglycemia and hypoglycemia for all glucagon doses tested. Glucagon clearance did not differ between glucagon doses studied in both groups. Therefore, the glucagon controller of a dual hormone control system may not need to adjust glucagon sensitivity, and hence glucagon dosing, based on glucose concentrations during euglycemia and hypoglycemia. PMID:26152766

  16. PARTICLES AND FIELDS: Systematic impact of spent nuclear fuel on θ13 sensitivity at reactor neutrino experiment

    NASA Astrophysics Data System (ADS)

    An, Feng-Peng; Tian, Xin-Chun; Zhan, Liang; Cao, Jun

    2009-09-01

    Reactor neutrino oscillation experiments, such as Daya Bay, Double Chooz and RENO are designed to determine the neutrino mixing angle θ13 with a sensitivity of 0.01-0.03 in sin2 2θ13 at 90% confidence level, an improvement over the current limit by more than one order of magnitude. The control of systematic uncertainties is critical to achieving the sin2 2θ13 sensitivity goal of these experiments. Antineutrinos emitted from spent nuclear fuel (SNF) would distort the soft part of energy spectrum and may introduce a non-negligible systematic uncertainty. In this article, a detailed calculation of SNF neutrinos is performed taking account of the operation of a typical reactor and the event rate in the detector is obtained. A further estimation shows that the event rate contribution of SNF neutrinos is less than 0.2% relative to the reactor neutrino signals. A global χ2 analysis shows that this uncertainty will degrade the θ13 sensitivity at a negligible level.

  17. Radiation sensitivity of quartz crystal oscillators experiment for the Long Duration Exposure Facility (LDEF)

    NASA Technical Reports Server (NTRS)

    Ahearn, J. S.; Venables, J. D.

    1992-01-01

    Factors determining the radiation sensitivity of quartz crystal oscillators were studied on NASA's LDEF. Quartz materials were examined in the transmission electron microscope (TEM) and classified as to their sensitivity to radiation damage by establishing the rate of damage caused by the electron beam in the microscope. Two types of materials, i.e., swept premium Q quartz and natural quartz were chosen because clear differences were observed in their response to the electron beam in the TEM studies. Quartz resonators were then fabricated from them, tested for frequency stability over a greater than 6 mo. period and flown on the LDEF satellite. After retrieval (more than 7 yrs in space) the stability of the resonators was again determined. All of the space exposed resonators fabricated with swept premium Q material exhibited a frequency shift above that of the control resonators: none of the resonators fabricated from the natural quartz materials exhibited such a shift. The significant differences observed between the two types of materials in both the ground-based TEM studies and the space radiation induced frequency changes suggest that there may be a correlation between the two observations.

  18. A Simulation Experience to Sensitize Persons to the Sensory Losses of the Elderly.

    ERIC Educational Resources Information Center

    Robichaud, M. Phyllis; Brown, Miner L.

    This paper describes a simulation experience to help people understand the feelings of the elderly through a program conducted by the Jewish Center for Aged in Chesterfield, MO. The four-hour program is divided into four sections: (1) a true-false test is given to assess participants' concepts of the aged; (2) inhibitors are applied to limit…

  19. Optimization of an absolute sensitivity in a glassy matrix during DNP-enhanced multidimensional solid-state NMR experiments.

    PubMed

    Takahashi, Hiroki; Fernández-de-Alba, Carlos; Lee, Daniel; Maurel, Vincent; Gambarelli, Serge; Bardet, Michel; Hediger, Sabine; Barra, Anne-Laure; De Paëpe, Gaël

    2014-02-01

    Thanks to instrumental and theoretical development, notably the access to high-power and high-frequency microwave sources, high-field dynamic nuclear polarization (DNP) on solid-state NMR currently appears as a promising solution to enhance nuclear magnetization in many different types of systems. In magic-angle-spinning DNP experiments, systems of interest are usually dissolved or suspended in glass-forming matrices doped with polarizing agents and measured at low temperature (down to ∼100K). In this work, we discuss the influence of sample conditions (radical concentration, sample temperature, etc.) on DNP enhancements and various nuclear relaxation times which affect the absolute sensitivity of DNP spectra, especially in multidimensional experiments. Furthermore, DNP-enhanced solid-state NMR experiments performed at 9.4 T are complemented by high-field CW EPR measurements performed at the same magnetic field. Microwave absorption by the DNP glassy matrix is observed even below the glass transition temperature caused by softening of the glass. Shortening of electron relaxation times due to glass softening and its impact in terms of DNP sensitivity is discussed. PMID:24480716

  20. Optimization of an absolute sensitivity in a glassy matrix during DNP-enhanced multidimensional solid-state NMR experiments

    NASA Astrophysics Data System (ADS)

    Takahashi, Hiroki; Fernández-de-Alba, Carlos; Lee, Daniel; Maurel, Vincent; Gambarelli, Serge; Bardet, Michel; Hediger, Sabine; Barra, Anne-Laure; De Paëpe, Gaël

    2014-02-01

    Thanks to instrumental and theoretical development, notably the access to high-power and high-frequency microwave sources, high-field dynamic nuclear polarization (DNP) on solid-state NMR currently appears as a promising solution to enhance nuclear magnetization in many different types of systems. In magic-angle-spinning DNP experiments, systems of interest are usually dissolved or suspended in glass-forming matrices doped with polarizing agents and measured at low temperature (down to ∼100 K). In this work, we discuss the influence of sample conditions (radical concentration, sample temperature, etc.) on DNP enhancements and various nuclear relaxation times which affect the absolute sensitivity of DNP spectra, especially in multidimensional experiments. Furthermore, DNP-enhanced solid-state NMR experiments performed at 9.4 T are complemented by high-field CW EPR measurements performed at the same magnetic field. Microwave absorption by the DNP glassy matrix is observed even below the glass transition temperature caused by softening of the glass. Shortening of electron relaxation times due to glass softening and its impact in terms of DNP sensitivity is discussed.

  1. The sensitivity of the general circulation to Arctic Sea ice boundaries - A numerical experiment

    NASA Technical Reports Server (NTRS)

    Herman, G. F.; Johnson, W. T.

    1978-01-01

    Results are presented for a set of numerical experiments conducted with the Goddard (formerly GISS) general circulation model. The experiments were designed to test the model atmospheric response to a single fixed and specified parameter, the total ice cover in the Davis Strait, Barents Sea, East Greenland Sea, Sea of Okhotsk and Bering Sea. Margin variations are considered that are substantially smaller than those involved in ice age or ice-free Arctic simulations. Anomaly is defined as the mean of two runs corresponding to climatological maximum sea ice conditions. Model results indicate that the ice margin anomalies are capable of altering local climates in certain regions of high and middle latitudes. Possible interactions between high latitudes and subtropical regions are suggested.

  2. Sensitivity to local dipole fields in the CRAZED experiment: An approach to bright spot MRI

    NASA Astrophysics Data System (ADS)

    Faber, Cornelius; Heil, Carolin; Zahneisen, Benjamin; Balla, David Z.; Bowtell, Richard

    2006-10-01

    Local dipole fields such as those created by small iron-oxide particles are used to produce regions of low intensity (dark contrast) in many molecular magnetic resonance imaging applications. We have investigated, with computer simulations and experiments at 17.6 T, how the COSY revamped with asymmetric z-gradient echo detection (CRAZED) experiment that selects intermolecular double-quantum coherences can also be used to visualize such local dipole fields. Application of the coherence-selection gradient pulses parallel to the main magnetic field produced similar, dark contrast as conventional gradient echo imaging. Application of the gradient along the magic angle leads to total loss of signal intensity in homogeneous samples. In the presence of local dipole fields, the contrast was inverted and bright signals from the dipoles were observed over a very low background. Both simulations and experiments showed that the signal strongly decreased when a phase-cycle suppressing single-quantum coherences was employed. Therefore, we conclude that most of the signal comes from directly refocused magnetization or intermolecular single-quantum coherences. Finally, we demonstrate that bright contrast from local dipole fields can also be obtained, when the pair of coherence-selection gradient pulses is deliberately mismatched. Both methods allowed visualization of local dipole fields in phantoms in experimental times of about 3 min.

  3. Conserved epigenetic sensitivity to early life experience in the rat and human hippocampus.

    PubMed

    Suderman, Matthew; McGowan, Patrick O; Sasaki, Aya; Huang, Tony C T; Hallett, Michael T; Meaney, Michael J; Turecki, Gustavo; Szyf, Moshe

    2012-10-16

    Early life experience is associated with long-term effects on behavior and epigenetic programming of the NR3C1 (GLUCOCORTICOID RECEPTOR) gene in the hippocampus of both rats and humans. However, it is unlikely that such effects completely capture the evolutionarily conserved epigenetic mechanisms of early adaptation to environment. Here we present DNA methylation profiles spanning 6.5 million base pairs centered at the NR3C1 gene in the hippocampus of humans who experienced abuse as children and nonabused controls. We compare these profiles to corresponding DNA methylation profiles in rats that received differential levels of maternal care. The profiles of both species reveal hundreds of DNA methylation differences associated with early life experience distributed across the entire region in nonrandom patterns. For instance, methylation differences tend to cluster by genomic location, forming clusters covering as many as 1 million bases. Even more surprisingly, these differences seem to specifically target regulatory regions such as gene promoters, particularly those of the protocadherin α, β, and γ gene families. Beyond these high-level similarities, more detailed analyses reveal methylation differences likely stemming from the significant biological and environmental differences between species. These results provide support for an analogous cross-species epigenetic regulatory response at the level of the genomic region to early life experience. PMID:23045659

  4. Use of Sensitivity and Uncertainty Analysis in the Design of Reactor Physics and Criticality Benchmark Experiments for Advanced Nuclear Fuel

    SciTech Connect

    Rearden, B.T.; Anderson, W.J.; Harms, G.A.

    2005-08-15

    Framatome ANP, Sandia National Laboratories (SNL), Oak Ridge National Laboratory (ORNL), and the University of Florida are cooperating on the U.S. Department of Energy Nuclear Energy Research Initiative (NERI) project 2001-0124 to design, assemble, execute, analyze, and document a series of critical experiments to validate reactor physics and criticality safety codes for the analysis of commercial power reactor fuels consisting of UO{sub 2} with {sup 235}U enrichments {>=}5 wt%. The experiments will be conducted at the SNL Pulsed Reactor Facility.Framatome ANP and SNL produced two series of conceptual experiment designs based on typical parameters, such as fuel-to-moderator ratios, that meet the programmatic requirements of this project within the given restraints on available materials and facilities. ORNL used the Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI) to assess, from a detailed physics-based perspective, the similarity of the experiment designs to the commercial systems they are intended to validate. Based on the results of the TSUNAMI analysis, one series of experiments was found to be preferable to the other and will provide significant new data for the validation of reactor physics and criticality safety codes.

  5. The role of experiments and of sensitivity analysis in simulation validation strategies with emphasis on reactor physics

    SciTech Connect

    Giuseppe Palmiotti; Massimo Salvatores

    2013-02-01

    The complementary role of experiments and of sensitivity analysis has been and still is a key feature of validation strategies used in the field of simulation tools for nuclear reactor design. The present paper gives a summary of the development of more and more sophisticated validation strategies up to the present trend for science-based validation approaches. Most examples and some very recent original developments are given, mostly in the field of neutronics that has traditionally provided cutting edge advances for simulation tools validation.

  6. Reflections on Doctoral Supervision: Drawing from the Experiences of Students with Additional Learning Needs in Two Universities

    ERIC Educational Resources Information Center

    Collins, Bethan

    2015-01-01

    Supervision is an essential part of doctoral study, consisting of relationship and process aspects, underpinned by a range of values. To date there has been limited research specifically about disabled doctoral students' experiences of supervision. This paper draws on qualitative, narrative interviews about doctoral supervision with disabled…

  7. Examining the Influence of Additional Field-Based Experiences on Pre-Service Teachers and Their Perceived Ability to Teach

    ERIC Educational Resources Information Center

    Clark, Sarah K.

    2012-01-01

    In an attempt to analyse more closely the training experiences of pre-service teachers, the author conducted an exploratory quasi-experimental study at a university located in the Rocky Mountain region of the USA. All students who were enrolled in the same reading methods course (but enrolled in different sections) were invited to participate in…

  8. Hot experience for cold-adapted microorganisms: temperature sensitivity of soil enzymes

    NASA Astrophysics Data System (ADS)

    Liu, Shibin; Razavidezfuly, Baharsadat; Kuzyakov, Yakov

    2016-04-01

    The temperature sensitivity of enzymes responsible for organic matter decomposition in cold environment soil, where warming is expected to be greatest is crucial. Based on Michaelis-Menten kinetics and Arrhenius function, we hypothesized that cold-adapted microorganisms will produce high efficient enzymes at cold temperatures (enzymes with lower apparent activation energy (Ea) at cold temperature ranges). To test our hypothesis, 30 g soil of Tibetan Plateau (4100 m a.s.l., annual temperature 2.4 °C) in 4 replicates were incubated for one month over a temperature range of 0-40 °C (with 5 °C steps) and determined the kinetic parameters of six enzymes involved in decomposing organics: cellobiohydrolase and β-glucosidase, which are commonly measured as enzymes responsible for consecutive stages of cellulose degradation; xylanase, which is responsible for breaking down hemicelluloses; acid phosphatase, which mineralizes organic P to phosphate by hydrolyzing phosphoric (mono) ester bonds under acidic conditions. Activities of leucine aminopeptidase and tyrosine aminopeptidase were analyzed to assess the hydrolysis of L-peptide bonds. The apparent activation energy varied between enzymes from 42 (phosphatase) to 54 (cellobiohydrolase) kJ mol-1 corresponding to the Q10 values of the enzyme reactions of 1.8-2.3. The increase of substrate affinity (Km) with temperature was gradual for most tested enzymes from 0-20 °C (enzymes involved in C cycle), (proteases) and 0-40 °C (phosphatase). However, within a high range of temperatures (25-40 °C) the hydrolytic activity was governed by enzymes with nearly constant substrate affinity. Overall, for enzymes involved in C cycle and proteases, a strong increase (30-40%) in Km at high temperatures (25 °C) reflects an expression of multiple isoenzymes each with different temperature optima and probable shift of microbial community. The general trend of catalytic efficiency (Vmax/Km) demonstrated a gradual increase with

  9. Search for Neutrino Radiation from Collapsing Stars and the Sensitivity of Experiments to the Different Types of Neutrinos

    NASA Astrophysics Data System (ADS)

    Dadykin, V. L.; Ryazhskaya, O. G.

    2013-11-01

    The experiments running to search for neutrino radiation from collapsing stars up to now traditionally take one's bearings for the detection of the ˜ ν e p -> e^ + n reaction and, accordingly, for the use of the hadrogenate targets. The observation of neutrino radiation from SN1987A showed that it is important to have in the composition of the targets beside the hadrogen also other nuclei suitable to neutrino radiation detection. In particular the presence of iron nuclei in the LSD provided for the sensational detection of νe flux at 2:52 UT on February 23 1987 when other more powerful detectors with their hadrogenate targets could not respond to this type of neutrino. The sensitivity of present searching experiments to different types of neutrino radiation from collapsing stars is discussed in the paper.

  10. CXTFIT/Excel-A modular adaptable code for parameter estimation, sensitivity analysis and uncertainty analysis for laboratory or field tracer experiments

    NASA Astrophysics Data System (ADS)

    Tang, Guoping; Mayes, Melanie A.; Parker, Jack C.; Jardine, Philip M.

    2010-09-01

    We implemented the widely used CXTFIT code in Excel to provide flexibility and added sensitivity and uncertainty analysis functions to improve transport parameter estimation and to facilitate model discrimination for multi-tracer experiments on structured soils. Analytical solutions for one-dimensional equilibrium and nonequilibrium convection dispersion equations were coded as VBA functions so that they could be used as ordinary math functions in Excel for forward predictions. Macros with user-friendly interfaces were developed for optimization, sensitivity analysis, uncertainty analysis, error propagation, response surface calculation, and Monte Carlo analysis. As a result, any parameter with transformations (e.g., dimensionless, log-transformed, species-dependent reactions, etc.) could be estimated with uncertainty and sensitivity quantification for multiple tracer data at multiple locations and times. Prior information and observation errors could be incorporated into the weighted nonlinear least squares method with a penalty function. Users are able to change selected parameter values and view the results via embedded graphics, resulting in a flexible tool applicable to modeling transport processes and to teaching students about parameter estimation. The code was verified by comparing to a number of benchmarks with CXTFIT 2.0. It was applied to improve parameter estimation for four typical tracer experiment data sets in the literature using multi-model evaluation and comparison. Additional examples were included to illustrate the flexibilities and advantages of CXTFIT/Excel. The VBA macros were designed for general purpose and could be used for any parameter estimation/model calibration when the forward solution is implemented in Excel. A step-by-step tutorial, example Excel files and the code are provided as supplemental material.

  11. Effects of biochar addition on greenhouse gas emissions and microbial responses in a short-term laboratory experiment.

    PubMed

    Yoo, Gayoung; Kang, Hojeong

    2012-01-01

    Biochar application to soil has drawn much attention as a strategy to sequester atmospheric carbon in soil ecosystems. The applicability of this strategy as a climate change mitigation option is limited by our understanding of the mechanisms responsible for the observed changes in greenhouse gas emissions from soils, microbial responses, and soil fertility changes. We conducted an 8-wk laboratory incubation using soils from PASTURE (silt loam) and RICE PADDY (silt loam) sites with and without two types of biochar (biochar from swine manure [CHAR-M] and from barley stover [CHAR-B]). Responses to addition of the different biochars varied with the soil source. Addition of CHAR-B did not change CO and CH evolution from the PASTURE or the RICE PADDY soils, but there was a decrease in NO emissions from the PASTURE soil. The effects of CHAR-M addition on greenhouse gas emissions were different for the soils. The most substantial change was an increase in NO emissions from the RICE PADDY soil. This result was attributed to a combination of abundant denitrifiers in this soil and increased net nitrogen mineralization. Soil phosphatase and N-acetylglucosaminidase activity in the CHAR-B-treated soils was enhanced compared with the controls for both soils. Fungal biomass was higher in the CHAR-B-treated RICE PADDY soil. From our results, we suggest CHAR-B to be an appropriate amendment for the PASTURE and RICE PADDY soils because it provides increased nitrogen availability and microbial activity with no net increase in greenhouse gas emissions. Application of CHAR-M to RICE PADDY soils could result in excess nitrogen availability, which may increase NO emissions and possible NO leaching problems. Thus, this study confirms that the ability of environmentally sound biochar additions to sequester carbon in soils depends on the characteristics of the receiving soil as well as the nature of the biochar. PMID:22751062

  12. Numerical experiments of the storm track sensitivity to oceanic frontal strength within the Kuroshio/Oyashio Extensions

    NASA Astrophysics Data System (ADS)

    Yao, Yao; Zhong, Zhong; Yang, Xiu-Qun

    2016-03-01

    The sensitivity of the North Pacific storm track to midlatitude oceanic frontal strength within the Kuroshio/Oyashio Extensions is investigated by applying artificially changed meridional sea surface temperature (SST) gradients in the Weather Research Forecasting model version 3.4. The result of sensitivity experiments further confirms the close relationship between the storm track activity and meridional SST gradient; i.e., the storm track activity can be intensified as a response to increases in the oceanic frontal strength. In order to better understand the mechanism for the storm track intensification due to increased SST gradient, velocity-temperature correlation and local energetics are analyzed. The result indicates that the enhancement of the meridional SST gradient leads to amplitude magnification of eddy meridional velocity and temperature and their phase consistency, suggesting that synoptic-scale eddies tend to approach the optimum structure for the baroclinic energy conversion, which is mainly responsible for the SST front-induced enhancement of storm track activity. In order to estimate the impact of the oceanic front on the maintenance of the near-surface baroclinicity, further investigation is made by the composite analysis. With the increase in oceanic frontal strength, the near-surface baroclinicity experiences a slow but strong restoration. The increase in the meridional SST gradient results in the intensification in the cross-frontal differential sensible heat flux, which can more effectively offset the relaxing effect of the transient eddy poleward heat transport.

  13. Age and seasonal effects on predator-sensitive foraging in squirrel monkeys (Saimiri sciureus): a field experiment.

    PubMed

    Stone, Anita I

    2007-02-01

    A field experiment was conducted to examine the effect of perceived predation risk on the use of foraging areas by juvenile and adult primates under different conditions of local food abundance. Wild squirrel monkeys, Saimiri sciureus, were observed in an experiment conducted during the dry and the wet seasons at a site in Eastern Amazonia, Brazil. Animals were presented with feeding platforms that differed in food quantity and exposure to aerial predators through varying vegetative cover. In the dry season, juveniles and adults chose platforms based solely on food quantity. However, in the wet season, juveniles foraged preferentially on high-reward platforms only if cover level also was high (i.e., potentially offered greater concealment from predators). In contrast, adults showed the same pattern of platform use regardless of season. These results indicate that age and local resource availability based on seasonality affect whether primates forage in a predator-sensitive manner. Juveniles may be more sensitive to predation risk when foraging, and individuals may take fewer risks when resource abundance is high in their environment. PMID:17154385

  14. Maximizing the sensitivity and reliability of peptide identification in large-scale proteomic experiments by harnessing multiple search engines.

    PubMed

    Yu, Wen; Taylor, J Alex; Davis, Michael T; Bonilla, Leo E; Lee, Kimberly A; Auger, Paul L; Farnsworth, Chris C; Welcher, Andrew A; Patterson, Scott D

    2010-03-01

    Despite recent advances in qualitative proteomics, the automatic identification of peptides with optimal sensitivity and accuracy remains a difficult goal. To address this deficiency, a novel algorithm, Multiple Search Engines, Normalization and Consensus is described. The method employs six search engines and a re-scoring engine to search MS/MS spectra against protein and decoy sequences. After the peptide hits from each engine are normalized to error rates estimated from the decoy hits, peptide assignments are then deduced using a minimum consensus model. These assignments are produced in a series of progressively relaxed false-discovery rates, thus enabling a comprehensive interpretation of the data set. Additionally, the estimated false-discovery rate was found to have good concordance with the observed false-positive rate calculated from known identities. Benchmarking against standard proteins data sets (ISBv1, sPRG2006) and their published analysis, demonstrated that the Multiple Search Engines, Normalization and Consensus algorithm consistently achieved significantly higher sensitivity in peptide identifications, which led to increased or more robust protein identifications in all data sets compared with prior methods. The sensitivity and the false-positive rate of peptide identification exhibit an inverse-proportional and linear relationship with the number of participating search engines. PMID:20101609

  15. Numerical experiments on the climatic sensitivity of an atmospheric hydrologic cycle

    NASA Technical Reports Server (NTRS)

    Roads, J. O.

    1978-01-01

    It is shown for an intermediate numerical model that fractional cloudiness and relative humidity decrease with increasing temperature. The fractional cloudiness decreases at a rate about 1 per deg K. This occurs in spite of an increase in the evaporation, water transport, condensation, precipitation and cloud water content with increasing temperature. These results are quite similar to those found from models with more highly parameterized clouds, notably the NCAR model. The fractional cloudiness in this model is measured by the fractional coverage of total cloud water and the fractional coverage of positive condensation, in addition to the relative humidity. It is also shown that some of the characteristics of a temperate climate can be simulated in an intermediate numerical model with periodic, antisymmetric and symmetric boundary conditions on an f plane. Intermediate models of this sort may therefore be useful to investigate general questions about the earth's hydrologic cycle on climatic space and time scales

  16. The Sensitivity of the Cloud Imaging and Particle Size Experiment to Gravity Wave Density Perturbations near the Stratopause

    NASA Astrophysics Data System (ADS)

    Carstens, J. N.; Bailey, S. M.; Alexander, M. J.; Randall, C. E.

    2014-12-01

    Nadir images of Rayleigh scattered UV sunlight (265 nm) from the Cloud Imaging and Particle Size (CIPS) instrument on the Aeronomy of Ice in the Mesosphere (AIM) satellite contain many periodic structures. These structures are believed to be the result of Gravity Waves (GW). In this work, we investigate the theoretical impact of GWs on the albedo imagery. We show that GWs are indeed capable of producing the observed structures. The sensitivity to GW perturbations peaks at an altitude of ~50 km with a FWHM of ~15 km with images taken at mid to polar latitudes. For vertical wavelengths greater than 15 km, this corresponds to GWs with momentum fluxes greater than ~0.1-0.01 mPa. Vertical wavelengths less than ~10 km require amplitudes larger than static stability considerations allow, so these GWs are not observable. Observable horizontal wavelengths range from approximately 20 to 300 km. These wavelength ranges correspond to a sensitivity to GWs with an intrinsic period shorter than ~2.5 hrs. Existing satellite GW studies in this altitude region use limb scanners or microwave nadir imagers, which are sensitive to much longer horizontal wavelengths. This tends to limit the sensitivity to longer period waves. Therefore, the addition of CIPS imagery to the existing coverage of GW measurements is complimentary - significantly expanding the spectral coverage of GWs near the stratopause. Short period GWs observed by CIPS carry significantly larger momentum flux than the climatological averages seen for longer period GWs, so important differences may exist. GWs are critically important to middle atmosphere dynamics, and their representation in global climate models is not well constrained by observations.

  17. Home-made experiment of Dye-sensitized TiO2 Nanocrystalline Solar Cells and its education evaluation

    NASA Astrophysics Data System (ADS)

    Tai, M. F.; Shieh, M. C.; Chen, T. W.

    2010-03-01

    Dyes extracted from some natural fruits including anthocyanins absorb sunlight and effectively activate electrons of anthocyanins. Thus these activated electrons are conducted between TiO2 nanocrystals and form electric potential and current between two electrodes. The dyes can be gotten from the natural fruits, such as blackberries, raspberry, pomegranate seeds and bing cherries. This principle permits making a dye sensitized TiO2 nanocrystallines solar cell (DSSC). All required materials and tools for fabricating a home- made DSSC are easy to obtain around home. The procedures are perfect hands-on experiment as well as demonstration in K-12 schools or home settings. We have designed several protocols for fabricating DSSC and have successfully demonstrated in more than 100 activities with different level students. K-12 Students were able to build their own working DSSC's within 2-3 hours sessions and learned about alternative energy sources. These experiments can inspire students and general public about the modern technology in daily life. Low cost (low than US 3 in Taiwan)and safety are also ensured in our DSSC experiments.

  18. Energy Calibration for a Sensitive Search for Neutrinoless Double-Beta Decay: Using the Cuoricino Experience to Prepare for CUORE

    NASA Astrophysics Data System (ADS)

    Ejzak, Larissa M.

    Neutrinos, which were long believed to be massless particles, are now known to have a tiny finite mass. A thorough understanding of the properties of their masses may provide vital clues to the history of the development of the universe as we know it. An intensive experimental search is underway for evidence of a Majorana mass component to the neutrino via many current and upcoming detectors seeking to observe the rare nuclear process neutrinoless double-beta decay (0nubetabeta). These detectors must be able to achieve very low backgrounds and a precise understanding of their energy scales. This paper presents the experimental approach of one of these 0nubetabeta experiments, the Cryogenic Underground Observatory for Rare Events (CUORE), and the attendant challenges of achieving excellent energy calibration performance in the detector from the perspectives of both hardware design and analysis. Experience and data from Cuoricino, the predecessor of CUORE, have been extensively leveraged to prepare optimized operational procedures for CUORE. The expected sensitivity profile of CUORE as a function of time is also presented and compared with those of other leading 0nubetabeta experiments.

  19. Spectrally resolved and phase-sensitive far-field measurement for the coherent addition of laser pulses in a tiled grating compressor.

    PubMed

    Hornung, Marco; Bödefeld, Ragnar; Kessler, Alexander; Hein, Joachim; Kaluza, Malte C

    2010-06-15

    We describe a method that can be used for the coherent addition of laser pulses. As different laser pulses are initially generated in a laser-pulse compressor equipped with a tiled grating, such a coherent addition is indispensable in order to maximize the intensity in the laser far field. We present measurements in this context where, up to now, an unavoidable difference in the grating constants between the phased gratings reduced the maximum achievable intensity. The method significantly facilitates the high-precision alignment of a tiled grating compressor and could also be used for a coherent addition of laser pulses. PMID:20548390

  20. Apatite/Melt Partitioning Experiments Reveal Redox Sensitivity to Cr, V, Mn, Ni, Eu, W, Th, and U

    NASA Technical Reports Server (NTRS)

    Righter, K.; Yang, S.; Humayun, M.

    2016-01-01

    Apatite is a common mineral in terrestrial, planetary, and asteroidal materials. It is commonly used for geochronology (U-Pb), sensing volatiles (H, F, Cl, S), and can concentrate rare earth elements (REE) during magmatic fractionation and in general. Some recent studies have shown that some kinds of phosphate may fractionate Hf and W and that Mn may be redox sensitive. Experimental studies have focused on REE and other lithophile elements and at simplified or not specified oxygen fugacities. There is a dearth of partitioning data for chalcophile, siderophile and other elements between apatite and melt. Here we carry out several experiments at variable fO2 to study the partitioning of a broad range of trace elements. We compare to existing data and then focus on several elements that exhibit redox dependent partitioning behavior.

  1. Retrieval and molecule sensitivity studies for the global ozone monitoring experiment and the scanning imaging absorption spectrometer for atmospheric chartography

    NASA Technical Reports Server (NTRS)

    Chance, Kelly V.; Burrows, John P.; Schneider, Wolfgang

    1991-01-01

    The Global Ozone Monitoring Experiment (GOME) and the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) are diode based spectrometers that will make atmospheric constituent and aerosol measurements from European satellite platforms beginning in the mid 1990's. GOME measures the atmosphere in the UV and visible in nadir scanning, while SCIAMACHY performs a combination of nadir, limb, and occultation measurements in the UV, visible, and infrared. A summary is presented of the sensitivity studies that were performed for SCIAMACHY measurements. As the GOME measurement capability is a subset of the SCIAMACHY measurement capability, the nadir, UV, and visible portion of the studies is shown to apply to GOME as well.

  2. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment.

    PubMed

    Taniguchi, Naoya; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Sasaki, Kiyoyuki; Otsuki, Bungo; Nakamura, Takashi; Matsushita, Tomiharu; Kokubo, Tadashi; Matsuda, Shuichi

    2016-02-01

    Selective laser melting (SLM) is an additive manufacturing technique with the ability to produce metallic scaffolds with accurately controlled pore size, porosity, and interconnectivity for orthopedic applications. However, the optimal pore structure of porous titanium manufactured by SLM remains unclear. In this study, we evaluated the effect of pore size with constant porosity on in vivo bone ingrowth in rabbits into porous titanium implants manufactured by SLM. Three porous titanium implants (with an intended porosity of 65% and pore sizes of 300, 600, and 900μm, designated the P300, P600, and P900 implants, respectively) were manufactured by SLM. A diamond lattice was adapted as the basic structure. Their porous structures were evaluated and verified using microfocus X-ray computed tomography. Their bone-implant fixation ability was evaluated by their implantation as porous-surfaced titanium plates into the cortical bone of the rabbit tibia. Bone ingrowth was evaluated by their implantation as cylindrical porous titanium implants into the cancellous bone of the rabbit femur for 2, 4, and 8weeks. The average pore sizes of the P300, P600, and P900 implants were 309, 632, and 956μm, respectively. The P600 implant demonstrated a significantly higher fixation ability at 2weeks than the other implants. After 4weeks, all models had sufficiently high fixation ability in a detaching test. Bone ingrowth into the P300 implant was lower than into the other implants at 4weeks. Because of its appropriate mechanical strength, high fixation ability, and rapid bone ingrowth, our results indicate that the pore structure of the P600 implant is a suitable porous structure for orthopedic implants manufactured by SLM. PMID:26652423

  3. Improving sensitivity and accuracy of pore structural characterisation using scanning curves in integrated gas sorption and mercury porosimetry experiments.

    PubMed

    Hitchcock, Iain; Lunel, Marie; Bakalis, Serafim; Fletcher, Robin S; Holt, Elizabeth M; Rigby, Sean P

    2014-03-01

    Gas sorption scanning curves are increasingly used as a means to supplement the pore structural information implicit in boundary adsorption and desorption isotherms to obtain more detailed pore space descriptors for disordered solids. However, co-operative adsorption phenomena set fundamental limits to the level of information that conventional scanning curve experiments can deliver. In this work, we use the novel integrated gas sorption and mercury porosimetry technique to show that crossing scanning curves are obtained for some through ink-bottle pores within a disordered solid, thence demonstrating that their shielded pore bodies are undetectable using conventional scanning experiments. While gas sorption alone was not sensitive enough to detect these pore features, the integrated technique was, and, thence, this synergistic method is more powerful than the two individual techniques applied separately. The integrated method also showed how the appropriate filling mechanism equation (e.g. meniscus geometry for capillary condensation equations), to use to convert filling pressure to pore size, varied with position along the adsorption branch, thereby enabling avoidance of the further systematic error introduced into PSDs by assuming a single filling mechanism for disordered solids. PMID:24407663

  4. Revealing Additional Dimensions of Globalisation and Cultural Hegemony: A Response to Roland S. Persson's Call for Cultural Sensitivity in Gifted Studies

    ERIC Educational Resources Information Center

    Ambrose, Don

    2012-01-01

    In this commentary, the author finds the interdisciplinary approach of Roland S. Persson's (2012a) target article refreshing. Persson's (2012a) additional emphases on ethnocentricity, cultural bias and strong threads of influence from the global economy also are helpful. They shed light on some strong contextual influences that shape the…

  5. Revisiting the sensitivity studies for leptonic CP-violation and mass hierarchy with T2K, NOνA and LBNE experiments

    NASA Astrophysics Data System (ADS)

    Deepthi, K. N.; C, Soumya; Mohanta, R.

    2015-02-01

    Precision measurement of neutrino mixing parameters and the determination of mass hierarchy are the primary goals of present and upcoming neutrino experiments. In this work, we study the sensitivity of T2K, NOνA and LBNE experiments to discover leptonic charge parity (CP)-violation and the determination of neutrino mass hierarchy. We obtain the correlation between the CP-violating phase {{δ }CP} and the mixing angles {{θ }13}, {{θ }23}, and the sensitivity to determine the octant of atmospheric mixing angle {{θ }23}. The entire analysis is performed for a total of ten years (5ν + 5 \\bar{ν }) of the running of T2K, NOνA and LBNE experiments. Furthermore, we also consider the impact of cross section uncertainties on the CP-violation sensitivity of the LBNE experiment.

  6. Seismic moment tensors of acoustic emissions recorded during laboratory rock deformation experiments: sensitivity to attenuation and anisotropy

    NASA Astrophysics Data System (ADS)

    Stierle, Eva; Vavryčuk, Václav; Kwiatek, Grzegorz; Charalampidou, Elli-Maria; Bohnhoff, Marco

    2016-04-01

    Seismic moment tensors can provide information on the size and orientation of fractures producing acoustic emissions (AEs) and on the stress conditions in the sample. The moment tensor inversion of AEs is, however, a demanding procedure requiring carefully calibrated sensors and accurate knowledge of the velocity model. In field observations, the velocity model is usually isotropic and time independent. In laboratory experiments, the velocity is often anisotropic and time dependent and attenuation might be significant due to opening or closure of microcracks in the sample during loading. In this paper, we study the sensitivity of the moment tensor inversion to anisotropy of P-wave velocities and attenuation. We show that retrieved moment tensors critically depend on anisotropy and attenuation and their neglect can lead to misinterpretations of the source mechanisms. The accuracy of the inversion also depends on the fracturing mode of AEs: tensile events are more sensitive to P-wave anisotropy and attenuation than shear events. We show that geometry of faulting in anisotropic rocks should be studied using the source tensors, since the P- and T-axes of the moment tensors are affected by velocity anisotropy and deviate from the true orientation of faulting. The stronger the anisotropy is, the larger the deviations are. Finally, we prove that the moment tensor inversion applied to a large dataset of AEs can be utilized to provide information on the attenuation parameters of the rock sample. The method is capable of measuring anisotropic attenuation in the sample and allows for detection of dilatant cracking according to the stress regime.

  7. Effect of volcano ash additions on nutrient concentrations, bloom dynamics and community metabolism in a short-term experiment in the NW Mediterranean Sea

    NASA Astrophysics Data System (ADS)

    Weinbauer, Markus

    2016-04-01

    Volcano ash deposition is now considered as an important source of inorganic bioavailable iron which can relieve Fe-limitation in the ocean. As volcano ash also releases PO4, a experiment was performed in the NW Mediterranean Sea to test whether volcano ash deposition can affect nutrient dynamics and bloom development in a P-limited system. In a 54h experiment, it was shown that the development of a phytoplankton bloom was not enhanced or even repressed by ash additions of 2 and 20 mg l-1, whereas higher ash concentrations (200 mg l-1) induced a phytoplankton bloom as indicated by elevated Chlorophyll-a levels. Concurrently, net community production (NCP) and gross primary production (GPP) were enhanced at T24h at the highest ash additions. The metabolic balance was roughly neutral at low or no ash additions, but shifted towards phototrophy at the highest ash additions. The data on inorganic nutrient development and release estimates from ash material assays suggest relieving of P-limitation concomitant with NO3 and silicate use from ash. The concentration of TEP increased with increasing ash levels. The abundances of the heterotrophic compartment (bacteria, viruses and ciliates) also indicated dose-dependent responses. Our data suggest that heterotrophs won the competition for inorganic nutrients at ash levels of 2 and 20 mg l-1, whereas phytoplankton won at levels of 200 mg l-1. Overall, our experiments point to a strong potential of volcano ash deposition as forcing factor for nutrient dynamics and the activity of microbial plankton in a P-limited system.

  8. Sensitivity of the Climate to Changes in Solar Irradiance, Orbital Forcing and Greenhouse Gases During the Maunder Minimum From a Suite of GCM Experiments

    NASA Astrophysics Data System (ADS)

    Waple, A. M.; DeConto, R. M.; Bradley, R. S.

    2002-05-01

    Equilibrium model experiments have been run with the GENESIS AGCM version 2.0 (Pollard and Thompson 1995b) to examine sensitivity of the climate to a variety of possible forcing scenarios during the Maunder Minimum (~1675), present-day and ~2050AD. Solar irradiance, orbital forcing and greenhouse gases were incrementally added in a suite of experiments to determine the relative effects of each individual forcing as well as the combined response. If solar irradiance is reduced to Maunder Minimum-estimated values (maintaining present-day greenhouse gases and orbital forcing), globally averaged temperature is cooler than present, as expected, and though the GCM does not have a coupled ocean, it does have a coupled sea-ice model and sea-ice feedbacks dominate the high-latitude response pattern. Especially large near-surface temperature responses are seen in the areas of Greenland and the Weddell Sea. Naturally, the sea-ice feedback leads to a marked seasonality of response, but there are substantial differences in the seasonal response in the tropics as well as at high latitudes. The model results indicate that a shift in the ITCZ position contributes to this temperature difference as well as substantial precipitation changes. Consistent with a cooler climate, precipitation is also moderately reduced relative to present. In addition, an increase in the meridionality of circulation, which has been suggested as a more persistent pattern of circulation for the Little Ice Age (eg. Wanner 1994), is evident when solar irradiance is reduced to estimated Maunder Minimum values in these model experiments. During all three model time-periods, including the Maunder Minimum, orbital forcing plays a larger role than expected, especially at high-latitudes. The forcing is of the opposite sign to that induced by solar variability over this time-frame, therefore moderately tempers the effect of lower solar irradiance during the Maunder Minimum. Greenhouse gases also play a large role

  9. Changes in water, carbon, and nitrogen fluxes with the addition of biochar to soils: lessons learned from laboratory and greenhouse experiments

    NASA Astrophysics Data System (ADS)

    Barnes, R. T.; Gallagher, M. E.; Masiello, C. A.; Liu, Z.; Dugan, B.; Rudgers, J. A.

    2011-12-01

    The addition of biochar to agricultural soils has the potential to provide a number of ecosystem services, ranging from carbon (C) sequestration to increased soil fertility and crop production. It is estimated that 0.5 to 0.9 Pg of C yr-1 can be sequestered through the addition of biochar to soils, significantly increasing the charcoal flux to the biosphere over natural inputs from fire (0.05 to 0.20 Pg C yr-1). There remain large uncertainties about biochar mobility within the environment, making it a challenge to assess the ecosystem residence time of biochar. We conducted laboratory and greenhouse experiments to understand how soil amendment with laboratory-produced biochar changes water, C, and nitrogen (N) fluxes from soils. We used column experiments to assess how biochar amendment to three types of soils (sand, organic, clay-rich) affected hydraulic conductivity and dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) fluxes. Results varied with soil type; biochar significantly decreased the hydraulic conductivity of the sand and organic soils by a factor of 10.6 and 2.7, respectively. While not statistically significant, biochar addition increased the hydraulic conductivity of the clay-rich soil by 50% on average. The addition of biochar significantly increased the DOC fluxes from the C-poor sand and clay soils while it significantly decreased the DOC flux from the organic-rich soil. In contrast, TDN fluxes decreased with biochar additions from all soil types, though the results were not statistically significant from the clay-rich soil. These laboratory experiments suggest that changes in the hydraulic conductivity of soil due to biochar amendments could play a significant role in understanding how biochar additions to agricultural fields will change watershed C and N dynamics. We additionally conducted a 28-day greenhouse experiment with sorghum plants using a three-way factorial treatment (water availability x biochar x mycorrhizae) to

  10. Experience of Using an Interdisciplinary Task Force to Develop a Culturally Sensitive Multipronged Tool to Improve Stroke Outcomes in Nigeria

    PubMed Central

    Arulogun, Oyedunni S.; Hurst, Samantha; Owolabi, Mayowa O.; Akinyemi, Rufus O.; Uvere, Ezinne; Saulson, Raelle; Ovbiagele, Bruce

    2016-01-01

    The burden of stroke is on the rise in Nigeria. A multi-faceted strategy is essential for reducing this growing burden and includes promoting medication adherence, optimizing traditional biomarker risk targets (blood pressure, cholesterol) and encouraging beneficial lifestyle practices. Successful implementation of this strategy is challenged by inadequate patient health literacy, limited patient/medical system resources, and lack of a coordinated interdisciplinary treatment approach. Moreover, the few interventions developed to improve medical care in Nigeria have generally been aimed at physicians (primarily) and nurses (secondarily) with minimal input from other key health care providers, and limited contributions from patients, caregivers, and the community itself. The Tailored Hospital-based Risk Reduction to Impede Vascular Events after Stroke (THRIVES) study is assessing the efficacy of a culturally sensitive multidimensional intervention for controlling blood pressure in recent stroke survivors. A key component of the intervention development process was the constitution of a project task force comprising various healthcare providers and administrators. This paper describes the unique experience in Sub-Saharan Africa of utilizing of an interdisciplinary Task Force to facilitate the development of the multipronged behavioral intervention aimed at enhancing stroke outcomes in a low-middle income country. PMID:27331144

  11. Development of a scintillating-fibre detector with position-sensitive photomultipliers for high-rate experiments

    NASA Astrophysics Data System (ADS)

    Horikawa, S.; Daito, I.; Gorin, A.; Hasegawa, T.; Horikawa, N.; Iwata, T.; Kuroda, K.; Manuilov, I.; Matsuda, T.; Miyachi, Y.; Riazantsev, A.; Sidorov, A.; Takabayashi, N.; Toeda, T.

    2004-01-01

    An extensive study was performed on the development of fast and precise scintillating-fibre detectors with position-sensitive photomultipliers (PSPM) for application in high-rate experiments. Several detector prototypes with Kuraray multi-cladding fibres of 0.5 mm diameter and Hamamatsu 16-channel H6568 PSPMs were constructed and tested under different beam conditions at the CERN PS and SPS beam lines. High time resolution of the order of 300 ps (r.m.s.) was obtained with spatial resolution of about 125 μm (r.m.s.) and with detection efficiency in excess of 98%. The detector prototype equipped with a 3-m-long light guide was also tested and showed a time resolution of about 540 ps (r.m.s.). Results of tests using a high-intensity muon beam show excellent stability of the detector performances in time and spatial resolutions as well as in detection efficiency under beam fluxes of up to 1.4×10 8 muons per 2.4-second spill.

  12. Assessing traumatic experiences in screening for PTSD in substance use disorder patients: what is the gain in addition to PTSD symptoms?

    PubMed

    Kok, Tim; de Haan, Hein; van der Meer, Margreet; Najavits, Lisa; de Jong, Cor

    2015-03-30

    Traumatic experiences have been linked with substance use disorders (SUD) and may be an important factor in the perpetuation of SUD, even in the absence of posttraumatic stress disorder (PTSD) symptoms. The purpose of the current study was to examine the relationship between childhood trauma and substance use severity in 192 SUD inpatients. Childhood trauma was assessed using the Traumatic Experiences Checklist (TEC). With variables derived from this measure in addition to PTSD symptoms, two regression models were created with alcohol use or drug use severity as dependent variables. Alcohol severity was explained by PTSD symptoms as well as the age of trauma. Drug severity was explained solely by PTSD symptoms. The clinical value of assessing childhood trauma in determining the addiction severity appears to be limited in comparison with PTSD symptoms. PMID:25687377

  13. Response of aboveground biomass and diversity to nitrogen addition – a five-year experiment in semi-arid grassland of Inner Mongolia, China

    PubMed Central

    He, Kejian; Qi, Yu; Huang, Yongmei; Chen, Huiying; Sheng, Zhilu; Xu, Xia; Duan, Lei

    2016-01-01

    Understanding the response of the plant community to increasing nitrogen (N) deposition is helpful for improving pasture management in semi-arid areas. We implemented a 5-year N addition experiment in a Stipa krylovii steppe of Inner Mongolia, northern China. The aboveground biomass (AGB) and species richness were measured annually. Along with the N addition levels, the species richness declined significantly, and the species composition changed noticeably. However, the total AGB did not exhibit a noticeable increase. We found that compensatory effects of the AGB occurred not only between the grasses and the forbs but also among Gramineae species. The plant responses to N addition, from the community to species level, lessened in dry years compared to wet or normal years. The N addition intensified the reduction of community productivity in dry years. Our study indicated that the compensatory effects of the AGB among the species sustained the stability of grassland productivity. However, biodiversity loss resulting from increasing N deposition might lead the semi-arid grassland ecosystem to be unsustainable, especially in dry years. PMID:27573360

  14. Response of aboveground biomass and diversity to nitrogen addition - a five-year experiment in semi-arid grassland of Inner Mongolia, China.

    PubMed

    He, Kejian; Qi, Yu; Huang, Yongmei; Chen, Huiying; Sheng, Zhilu; Xu, Xia; Duan, Lei

    2016-01-01

    Understanding the response of the plant community to increasing nitrogen (N) deposition is helpful for improving pasture management in semi-arid areas. We implemented a 5-year N addition experiment in a Stipa krylovii steppe of Inner Mongolia, northern China. The aboveground biomass (AGB) and species richness were measured annually. Along with the N addition levels, the species richness declined significantly, and the species composition changed noticeably. However, the total AGB did not exhibit a noticeable increase. We found that compensatory effects of the AGB occurred not only between the grasses and the forbs but also among Gramineae species. The plant responses to N addition, from the community to species level, lessened in dry years compared to wet or normal years. The N addition intensified the reduction of community productivity in dry years. Our study indicated that the compensatory effects of the AGB among the species sustained the stability of grassland productivity. However, biodiversity loss resulting from increasing N deposition might lead the semi-arid grassland ecosystem to be unsustainable, especially in dry years. PMID:27573360

  15. High sensitivity and versatility of the DEER experiment on nitroxide radical pairs at Q-band frequencies.

    PubMed

    Polyhach, Yevhen; Bordignon, Enrica; Tschaggelar, René; Gandra, Sandhya; Godt, Adelheid; Jeschke, Gunnar

    2012-08-14

    Measurement of distances with the Double Electron-Electron Resonance (DEER) experiment at X-band frequencies using a pair of nitroxides as spin labels is a popular biophysical tool for studying function-related conformational dynamics of proteins. The technique is intrinsically highly precise and can potentially access the range from 1.5 to 6-10 nm. However, DEER performance drops strongly when relaxation rates of the nitroxide spin labels are high and available material quantities are low, which is usually the case for membrane proteins reconstituted into liposomes. This leads to elevated noise levels, very long measurement times, reduced precision, and a decrease of the longest accessible distances. Here we quantify the performance improvement that can be achieved at Q-band frequencies (34.5 GHz) using a high-power spectrometer. More than an order of magnitude gain in sensitivity is obtained with a homebuilt setup equipped with a 150 W TWT amplifier by using oversized samples. The broadband excitation enabled by the high power ensures that orientation selection can be suppressed in most cases, which facilitates extraction of distance distributions. By varying pulse lengths, Q-band DEER can be switched between orientationally non-selective and selective regimes. Because of suppression of nuclear modulations from matrix protons and deuterons, analysis of the Q-band data is greatly simplified, particularly in cases of very small DEER modulation depth due to low binding affinity between proteins forming a complex or low labelling efficiency. Finally, we demonstrate that a commercial Q-band spectrometer can be readily adjusted to the high-power operation. PMID:22751953

  16. A sensitive pressure sensor for diamond anvil cell experiments up to 2 GPa: FluoSpheres[reg

    SciTech Connect

    Picard, Aude; Oger, Phil M.; Daniel, Isabelle; Cardon, Herve; Montagnac, Gilles; Chervin, Jean-Claude

    2006-08-01

    We present an optical pressure sensor suitable for experiments in diamond anvil cell in the 0.1 MPa-2 GPa pressure range, for temperatures between ambient and 323 K. It is based on the pressure-dependent fluorescence spectrum of FluoSpheres[reg], which are commercially available fluorescent microspheres commonly used to measure blood flow in experimental biology. The fluorescence of microspheres is excited by the 514.5 nm line of an Ar{sup +} laser, and the resulting spectrum displays three very intense broad bands at 534, 558, and 598 nm, respectively. The reference wavelength and pressure gauge is that of the first inflection point of the spectrum, located at 525.6{+-}0.2 nm at ambient pressure. It is characterized by an instantaneous and large linear pressure shift of 9.93({+-}0.08) nm/GPa. The fluorescence of the FluoSpheres[reg] has been investigated as a function of pressure (0.1-4 GPa), temperature (295-343 K), pH (3-12), salinity, and pressure transmitting medium. These measurements show that, for pressures comprised between 0.1 MPa and 2 GPa, at temperatures not exceeding 323 K, at any pH, in aqueous pressure transmitting media, pressure can be calculated from the wavelength shift of two to three beads, according to the relation P=0.100 ({+-}0.001) {delta}{lambda}{sub i}(P) with {delta}{lambda}{sub i}(P)={lambda}{sub i}(P)-{lambda}{sub i}(0) and {lambda}{sub i}(P) as the wavelength of the first inflection point of the spectrum at the pressure P. This pressure sensor is approximately thirty times more sensitive than the ruby scale and responds instantaneously to pressure variations.

  17. A sensitive pressure sensor for diamond anvil cell experiments up to 2 GPa: FluoSpheres®

    NASA Astrophysics Data System (ADS)

    Picard, Aude; Oger, Phil M.; Daniel, Isabelle; Cardon, Hervé; Montagnac, Gilles; Chervin, Jean-Claude

    2006-08-01

    We present an optical pressure sensor suitable for experiments in diamond anvil cell in the 0.1MPa-2GPa pressure range, for temperatures between ambient and 323K. It is based on the pressure-dependent fluorescence spectrum of FluoSpheres®, which are commercially available fluorescent microspheres commonly used to measure blood flow in experimental biology. The fluorescence of microspheres is excited by the 514.5nm line of an Ar+ laser, and the resulting spectrum displays three very intense broad bands at 534, 558, and 598nm, respectively. The reference wavelength and pressure gauge is that of the first inflection point of the spectrum, located at 525.6±0.2nm at ambient pressure. It is characterized by an instantaneous and large linear pressure shift of 9.93(±0.08)nm/GPa. The fluorescence of the FluoSpheres® has been investigated as a function of pressure (0.1-4GPa), temperature (295-343K), pH (3-12), salinity, and pressure transmitting medium. These measurements show that, for pressures comprised between 0.1MPa and 2GPa, at temperatures not exceeding 323K, at any pH, in aqueous pressure transmitting media, pressure can be calculated from the wavelength shift of two to three beads, according to the relation P =0.100 (±0.001) Δλi(P ) with Δλi(P )=λi(P)-λi(0) and λi(P) as the wavelength of the first inflection point of the spectrum at the pressure P. This pressure sensor is approximately thirty times more sensitive than the ruby scale and responds instantaneously to pressure variations.

  18. Sensitivity analysis of conservative and reactive stream transient storage models applied to field data from multiple-reach experiments

    USGS Publications Warehouse

    Gooseff, M.N.; Bencala, K.E.; Scott, D.T.; Runkel, R.L.; McKnight, Diane M.

    2005-01-01

    The transient storage model (TSM) has been widely used in studies of stream solute transport and fate, with an increasing emphasis on reactive solute transport. In this study we perform sensitivity analyses of a conservative TSM and two different reactive solute transport models (RSTM), one that includes first-order decay in the stream and the storage zone, and a second that considers sorption of a reactive solute on streambed sediments. Two previously analyzed data sets are examined with a focus on the reliability of these RSTMs in characterizing stream and storage zone solute reactions. Sensitivities of simulations to parameters within and among reaches, parameter coefficients of variation, and correlation coefficients are computed and analyzed. Our results indicate that (1) simulated values have the greatest sensitivity to parameters within the same reach, (2) simulated values are also sensitive to parameters in reaches immediately upstream and downstream (inter-reach sensitivity), (3) simulated values have decreasing sensitivity to parameters in reaches farther downstream, and (4) in-stream reactive solute data provide adequate data to resolve effective storage zone reaction parameters, given the model formulations. Simulations of reactive solutes are shown to be equally sensitive to transport parameters and effective reaction parameters of the model, evidence of the control of physical transport on reactive solute dynamics. Similar to conservative transport analysis, reactive solute simulations appear to be most sensitive to data collected during the rising and falling limb of the concentration breakthrough curve. ?? 2005 Elsevier Ltd. All rights reserved.

  19. Nucleus accumbens NMDA receptor activation regulates amphetamine cross-sensitization and deltaFosB expression following sexual experience in male rats.

    PubMed

    Beloate, Lauren N; Weems, Peyton W; Casey, Graham R; Webb, Ian C; Coolen, Lique M

    2016-02-01

    Sexual experience in male rats followed by a period of abstinence causes sensitization to d-Amphetamine (Amph) reward, evidenced by an increased conditioned place preference (CPP) for low doses of Amph. Moreover, sexual experience induces neural plasticity within the nucleus accumbens (NAc), including induction of deltaFosB, which plays a key role in Amph reward cross-sensitization. The NMDA receptor subunit NR1 is also upregulated by mating, but the functional relevance of NMDA receptors in sex experience-induced effects is unknown. Here, we examined the influence of intra-NAc MK 801 infusions on sex experience-induced NAc deltaFosB and cFos expression, as well as mating- and Amph-induced CPP in adult male rats. In experiment 1, males received MK 801 or saline into the NAc during each of 4 consecutive days of mating or handling and were tested for Amph CPP and experience-induced deltaFosB 10 days later. Intra-NAc MK 801 during sexual behavior prevented experience-induced increases in Amph CPP and NAc deltaFosB expression without affecting sexual behavior. In experiment 2, the effects of intra-NAc MK 801 on mating-induced CPP were examined by intra-NAc infusion of MK 801 or saline prior to mating on conditioning days. Intra-NAc MK 801 did not affect mating-induced CPP. Next, effects of intra-NAc MK 801 on mating-induced cFos immunoreactivity were examined. MK 801 prevented mating-induced cFos expression in NAc shell and core. Together, these results provide evidence that NAc NMDA receptor activation during sexual behavior plays a key role in mating-induced cFos and deltaFosB expression and subsequent experience-induced cross-sensitization to Amph reward. PMID:26391065

  20. Predictive significance of detectable cardiac troponin I measured with a contemporary-sensitive assay in a real life experience

    PubMed Central

    Bonfanti, Laura; Lippi, Giuseppe; Ciullo, Irene; Meschi, Tiziana; Ticinesi, Andrea; Aloe, Rosalia; Di Spigno, Francesco

    2016-01-01

    Background Cardiac troponin (cTn) testing has reduced the likelihood of erroneous discharge of patients with acute coronary syndrome (ACS) from the emergency department (ED), but doubts remain about optimal clinical use. This study was planned for evaluating the predictive significance of cTn values between the limit of detection of the method and the 99th percentile in ED patients evaluated for suspected ACS. Methods In this retrospective study all hospital records of patients admitted over a 6-month period to the ED and with at least one cTnI value comprised between the limit of detection (0.01 ng/mL) and the 99th percentile of the assay (0.05 ng/mL) were analyzed. Results A total of 4,749 patients with cTnI value between 0.01–0.05 ng/mL were identified among 57,879 ED visits throughout the study period. Overall, 2,189 patients (46.1%) were discharged from the ED, 2,529 (53.25%) were admitted to the hospital and 31 (0.65%) died during ED stay. A total number of 289 patients out of 2,189 who were discharged (i.e., 13.2%) had additional ED visits within 30 days. Among these, 6 were diagnosed with ACS, representing 0.27% of patients discharged [negative predictive value (NPV) 0.997; 95% CI, 0.994–0.999] and 2.1% of those with second admission (NPV 0.979; 95% CI, 0.955–0.992). Only one of the 2,529 patients admitted to the hospital (i.e., 0.04%) developed an ACS during hospital stay. Conclusions The results of our retrospective study suggest that the suitability of using a contemporary-sensitive cTnI immunoassay assay in the context of an appropriate protocol represents a safe and effective strategy for ruling in and ruling out ACS in patients presenting to the ED. PMID:27500153

  1. Seismic reflection data imaging and interpretation from Braniewo2014 experiment using additional wide-angle refraction and reflection and well-logs data

    NASA Astrophysics Data System (ADS)

    Trzeciak, Maciej; Majdański, Mariusz; Białas, Sebastian; Gaczyński, Edward; Maksym, Andrzej

    2015-04-01

    Braniewo2014 reflection and refraction experiment was realized in cooperation between Polish Oil and Gas Company (PGNiG) and the Institute of Geophysics (IGF), Polish Academy of Sciences, near the locality of Braniewo in northern Poland. PGNiG realized a 20-km-long reflection profile, using vibroseis and dynamite shooting; the aim of the reflection survey was to characterise Silurian shale gas reservoir. IGF deployed 59 seismic stations along this profile and registered additional full-spread wide-angle refraction and reflection data, with offsets up to 12 km; maximum offsets from the seismic reflection survey was 3 km. To improve the velocity information two velocity logs from near deep boreholes were used. The main goal of the joint reflection-refraction interpretation was to find relations between velocity field from reflection velocity analysis and refraction tomography, and to build a velocity model which would be consistent for both, reflection and refraction, datasets. In this paper we present imaging results and velocity models from Braniewo2014 experiment and the methodology we used.

  2. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  3. Co-addition of manure increases the dissipation rates of tylosin A and the numbers of resistance genes in laboratory incubation experiments.

    PubMed

    Li, Qian; Wang, Yan; Zou, Yong-De; Liao, Xin-Di; Liang, Juan-Boo; Xin, Wen; Wu, Yin-Bao

    2015-09-15

    The behavior of veterinary antibiotics in the soil is commonly studied using the following methods to add antibiotics to the soil: (A) adding manure collected from animals fed a diet that includes antibiotics; (B) adding antibiotic-free animal manure spiked with antibiotics; and (C) the direct addition of antibiotics. However, most studies have only used methods (B) and (C) in their research, and few studies have simultaneously compared the different antibiotic addition methods. This study used tylosin A (TYLA) as a model antibiotic to compare the effects of these three commonly used antibiotic addition methods on the dissipation rates of TYLA and the numbers of resistance genes in laboratory incubation experiments. The results showed that the three treatment methods produced similar TYLA degradation trends; however, there were significant differences (P<0.05) in the TYLA degradation half-life (t1/2) among the three methods. The half-life of TYLA degradation in treatments A, B and C was 2.44 ± 0.04, 1.21 ± 0.03 and 5.13 ± 0.11 days, respectively. The presence of manure resulted in a higher electrical conductivity (EC), higher relative abundance of Citrobacter amalonaticus, higher macrolide resistant gene (ermB, ermF and ermT) count and lower ecological toxicity in the soil, which could partially explain the higher TYLA degradation rate in the treatments containing manure. The higher degradation rate of TYLA in treatment B when compared to treatment A could be due to the lower concentrations of tylosin B (TYLB) and tylosin D (TYLD). The main route for veterinary antibiotics to enter the soil is via the manure of animals that have been administered antibiotics. Therefore, the more appropriate method to study the degradation and ecotoxicity of antibiotic residues in the soil is by using manure from animals fed/administered the particular antibiotic rather than by adding the antibiotic directly to the soil. PMID:25958362

  4. Soil microbial biomass and community structure affected by repeated additions of sewage sludge in four Swedish long-term field experiments

    NASA Astrophysics Data System (ADS)

    Börjesson, G.; Kätterer, T.; Kirchmann, H.

    2012-04-01

    Soil organic matter is a key attribute of soil fertility. The pool of soil organic C can be increased, either by mineral fertilisers or by adding organic amendments such as sewage sludge. Sewage sludge has positive effects on agricultural soils through the supply of organic matter and essential plant nutrients, but sludge may also contain unwanted heavy metals, xenobiotic substances and pathogens. One obvious effect of long-term sewage sludge addition is a decrease in soil pH, caused by N mineralisation followed by nitrification, sulphate formation and presence of organic acids with the organic matter added. The objective of this study was to investigate the effect of sewage sludge on the microbial biomass and community structure. Materials and methods We analysed soil samples from four sites where sewage sludge has been repeatedly applied in long-term field experiments situated in different parts of Sweden; Ultuna (59°49'N, 17°39'E, started 1956), Lanna (58°21'N, 13°06'E, started 1997-98), Petersborg (55°32'N, 13°00'E, started 1981) and Igelösa (55°45'N, 13°18'E, started 1981). In these four experiments, at least one sewage sludge treatment is included in the experimental design. In the Ultuna experiment, all organic fertilisers, including sewage sludge, are applied every second year, corresponding to 4 ton C ha-1. The Lanna experiment has a similar design, with 8 ton dry matter ha-1 applied every second year. Lanna also has an additional treatment in which metal salts (Cd, Cu, Ni and Zn) are added together with sewage sludge. At Petersborg and Igelösa, two levels of sewage sludge (4 or 12 ton dry matter ha-1 every 4th year) are compared with three levels of NPK fertiliser (0 N, ½ normal N and normal N). Topsoil samples (0-20 cm depth) from the four sites were analysed for total C, total N, pH and PLFAs (phospholipid fatty acids). In addition, crop yields were recorded. Results At all four sites, sewage sludge has had a positive effect on crop yields

  5. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  6. Experiences on p-Version Time-Discontinuous Galerkin's Method for Nonlinear Heat Transfer Analysis and Sensitivity Analysis

    NASA Technical Reports Server (NTRS)

    Hou, Gene

    2004-01-01

    The focus of this research is on the development of analysis and sensitivity analysis equations for nonlinear, transient heat transfer problems modeled by p-version, time discontinuous finite element approximation. The resulting matrix equation of the state equation is simply in the form ofA(x)x = c, representing a single step, time marching scheme. The Newton-Raphson's method is used to solve the nonlinear equation. Examples are first provided to demonstrate the accuracy characteristics of the resultant finite element approximation. A direct differentiation approach is then used to compute the thermal sensitivities of a nonlinear heat transfer problem. The report shows that only minimal coding effort is required to enhance the analysis code with the sensitivity analysis capability.

  7. Stochastic resonance in visual sensitivity.

    PubMed

    Kundu, Ajanta; Sarkar, Sandip

    2015-04-01

    It is well known from psychophysical studies that stochastic resonance, in its simplest threshold paradigm, can be used as a tool to measure the detection sensitivity to fine details in noise contaminated stimuli. In the present manuscript, we report simulation studies conducted in the similar threshold paradigm of stochastic resonance. We have estimated the contrast sensitivity in detecting noisy sine-wave stimuli, with varying area and spatial frequency, as a function of noise strength. In all the cases, the measured sensitivity attained a peak at intermediate noise strength, which indicate the occurrence of stochastic resonance. The peak sensitivity exhibited a strong dependence on area and spatial frequency of the stimulus. We show that the peak contrast sensitivity varies with spatial frequency in a nonmonotonic fashion and the qualitative nature of the sensitivity variation is in good agreement with human contrast sensitivity function. We also demonstrate that the peak sensitivity first increases and then saturates with increasing area, and this result is in line with the results of psychophysical experiments. Additionally, we also show that critical area, denoting the saturation of contrast sensitivity, decreases with spatial frequency and the associated maximum contrast sensitivity varies with spatial frequency in a manner that is consistent with the results of psychophysical experiments. In all the studies, the sensitivities were elevated via a nonlinear filtering operation called stochastic resonance. Because of this nonlinear effect, it was not guaranteed that the sensitivities, estimated at each frequency, would be in agreement with the corresponding results of psychophysical experiments; on the contrary, close agreements were observed between our results and the findings of psychophysical investigations. These observations indicate the utility of stochastic resonance in human vision and suggest that this paradigm can be useful in psychophysical studies

  8. The Role of Patients’ Age on Their Preferences for Choosing Additional Blood Pressure-Lowering Drugs: A Discrete Choice Experiment in Patients with Diabetes

    PubMed Central

    de Vries, Sieta T.; de Vries, Folgerdiena M.; Dekker, Thijs; Haaijer-Ruskamp, Flora M.; de Zeeuw, Dick; Ranchor, Adelita V.; Denig, Petra

    2015-01-01

    Objectives To assess whether patients’ willingness to add a blood pressure-lowering drug and the importance they attach to specific treatment characteristics differ among age groups in patients with type 2 diabetes. Materials and Methods Patients being prescribed at least an oral glucose-lowering and a blood pressure-lowering drug completed a questionnaire including a discrete choice experiment. This experiment contained choice sets with hypothetical blood pressure-lowering drugs and a no additional drug alternative, which differed in their characteristics (i.e. effects and intake moments). Differences in willingness to add a drug were compared between patients <75 years (non-aged) and ≥75 years (aged) using Pearson χ2-tests. Multinomial logit models were used to assess and compare the importance attached to the characteristics. Results Of the 161 patients who completed the questionnaire, 151 (72%) could be included in the analyses (mean age 68 years; 42% female). Aged patients were less willing to add a drug than non-aged patients (67% versus 84% respectively; P = 0.017). In both age groups, the effect on blood pressure was most important for choosing a drug, followed by the risk of adverse drug events and the risk of death. The effect on limitations due to stroke was only significant in the non-aged group. The effect on blood pressure was slightly more important in the non-aged than the aged group (P = 0.043). Conclusions Aged patients appear less willing to add a preventive drug than non-aged patients. The importance attached to various treatment characteristics does not seem to differ much among age groups. PMID:26445349

  9. Two-dimensional cross-section sensitivity and uncertainty analysis of the LBM (Lithium Blanket Module) experiments at LOTUS

    SciTech Connect

    Davidson, J.W.; Dudziak, D.J.; Pelloni, S.; Stepanek, J.

    1988-01-01

    In a recent common Los Alamos/PSI effort, a sensitivity and nuclear data uncertainty path for the modular code system AARE (Advanced Analysis for Reactor Engineering) was developed. This path includes the cross-section code TRAMIX, the one-dimensional finite difference S/sub N/-transport code ONEDANT, the two-dimensional finite element S/sub N/-transport code TRISM, and the one- and two-dimensional sensitivity and nuclear data uncertainty code SENSIBL. Within the framework of the present work a complete set of forward and adjoint two-dimensional TRISM calculations were performed both for the bare, as well as for the Pb- and Be-preceeded, LBM using MATXS8 libraries. Then a two-dimensional sensitivity and uncertainty analysis for all cases was performed. The goal of this analysis was the determination of the uncertainties of a calculated tritium production per source neutron from lithium along the central Li/sub 2/O rod in the LBM. Considered were the contributions from /sup 1/H, /sup 6/Li, /sup 7/Li, /sup 9/Be, /sup nat/C, /sup 14/N, /sup 16/O, /sup 23/Na, /sup 27/Al, /sup nat/Si, /sup nat/Cr, /sup nat/Fe, /sup nat/Ni, and /sup nat/Pb. 22 refs., 1 fig., 3 tabs.

  10. Female genital cutting (FGC) and the ethics of care: community engagement and cultural sensitivity at the interface of migration experiences

    PubMed Central

    2014-01-01

    Background Female Genital Cutting (FGC) anchored in a complex socio-cultural context becomes significant at the interface of access of health and social services in host countries. The practice of FGC at times, understood as a form of gender-based violence, may result in unjustifiable consequences among girls and women; yet, these practices are culturally engrained traditions with complex meanings calling for ethically and culturally sensitive health and social service provision. Intents and meanings of FGC practice need to be well understood before before any policies that criminalize and condemn are derived and implemented. FGC is addressed as a global public health issue with complex legal and ethical dimensions which impacts ability to access services, far beyond gender sensitivity. The ethics of terminology are addressed, building on the sustained controversial debate in regards to the delicate issue of conceptualization. An overview of international policies is provided, identifying the current trend of condemnation of FGC practices. Socio-cultural and ethical challenges are discussed in light of selected findings from a community-based research project. The illustrative examples provided focus on Western countries, with a specific emphasis on Canada. Discussion The examples provided converge with the literature confirming the utmost necessity to engage with the FGC practicing communities allowing for ethically sensitive strategies, reduction of harm in relation to systems of care, and prevention of the risk of systematic gendered stigmatization. A culturally competent, gender and ethically sensitive approach is argued for to ensure the provision of quality ethical care for migrant families in host countries. We argue that socio-cultural determinants such as ethnicity, migration, sex and gender need to be accounted for as integral to the social construction of FGC. Summary Working partnerships between the public health sector and community based organisations

  11. Simulation of Tropical Cyclone Circulation Over the Bay of Bengal Using the Arakawa-Schubert Cumulus Parameterization. Part II: Some Sensitivity Experiments

    NASA Astrophysics Data System (ADS)

    Bhaskar Rao, D. V.; Ashok, K.

    - The role of sea-surface temperature (SST) and Coriolis parameter in the evolution and intensification of tropical cyclones has been examined using the ten-level axi-symmetric primitive equation model described in the companion paper (Bhaskar Rao and Ashok, 1999). Two experiments have been conducted using the ten-level model to assess the role of Coriolis parameter ``f'' in tropical cyclone intensity and the size of the storm generated. Six experiments have been performed to assess the importance of Sea-Surface Temperature (SST) in tropical cyclogenesis and intensification. The initial thermodynamic field and the initial vortex are the same as that used to simulate the Bay of Bengal tropical cyclone discussed in the companion paper. Further sensitivity experiments indicated a strong dependency of the model on SSTs. The model initial vortex could not intensify with an SST of 299K but could with an SST of 300K. The increase of SST from 300K to 300.5K shows rapid intensification with a minimum central surface pressure of 910hPa and a maximum tangential wind of 80m/s. Further increase of SST only shows a marginal increase in intensity and a larger radius of maximum wind. Sensitivity experiments to assess the role of the Coriolis parameter suggest that tropical cyclones develop more intensity and are faster at relatively lower latitudes.

  12. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  13. Addition of trim coils to the Tandem Mirror Experiment Upgrade (TMX-U) magnet system to improve the magnetic field mapping

    SciTech Connect

    Wong, R.L.; Pedrotti, L.R.; Baldwin, D.E.; Hibbs, S.M.; Hill, D.N.; Hornady, R.H.; Jackson, M.C.

    1985-11-14

    The mapping of the magnetic flux bundle from the center cell to the Plasma Potential Control plates (PPC) on the end fan of the Tandem Mirror Experiment Upgrade (TMX-U), was improved by the addition of trim coils (12,000 amp-turns) on each side of each end fan next to the pump beam magnetic shields. The coils' axes are oriented perpendicular to the machine centerline. These coils made the necessary corrections to the field-line mapping, while keeping the field in the nearby pump beam magnetic shield below the saturation threshold. This paper briefly describes the problem, discusses the design as it evolved, and presents the results of the field testing. The disturbance to the field mapping and the appropriate corrections were determined using the code GFUN (a three dimensional electromagnetic field analysis code that includes the presence of permeable materials). The racetrack-shaped coils have dimensions of 1.5 feet by 3 feet and are powered by a renovated 600 kW Bart-Messing power supply controlled by the machine's magnet control system. The magnets were fabricated from polyimide-coated magnet wire. They are rated to 200/sup 0/C, although in pulsed operation they rise only a few degrees centigrade. The coils are placed outside of the vacuum system, and thus are considerably simpler than the other machine magnets. The restraints are designed to withstand a force of 1000 pounds per coil and a turning moment of 1000 foot pounds. The calculated field strengths were verified on the machine by inserting a Hall probe along the axis. The perturbations to the neutral beam magnetic shields were also measured. A brief description of the improvement in the machine performance is also included.

  14. Consistency in Women’s Reports of Sensitive Behavior In an Interview Mode Experiment, São Paulo, Brazil

    PubMed Central

    Mensch, Barbara S.; Hewett, Paul C.; Jones, Heidi E.; Luppi, Carla Gianni; Lippman, Sheri A.; Pinho, Adriana A.; Diaz, Juan

    2009-01-01

    CONTEXT Inaccurate reporting of sexual behavior creates amisleading picture of individuals’ risk for STI infection. Despite a substantial body of U.S. research on the consistency of self-reports of sensitive behavior, only a few such studies have been conducted in developing countries. METHODS Consistency in the reporting of sexual activity and other sensitive behaviors was assessed among 818 women aged 18–40who enrolled in 2004 in a study examining STI screening and diagnosis in São Paulo, Brazil. Participants were randomized into face-to-face interview and audio computer-assisted self-interview(audio-CASI) groups, and a six-week follow-up interview was conducted using audio-CASI for all participants. Differences between groups were assessed using t tests, and logistic regression analyses were used to estimate the likelihood of inconsistency within the enrollment interview and between the enrollment and follow-up interviews. RESULTS Consistency in reporting at the enrollment interview was higher in the face-to-face group than in the audio-CASI group, likely because interviewers prompted women to reconcile discrepant responses, whereas the audio-CASI program did not enforce logical consistency. However, consistency between enrollment and follow-up was significantly lower in the face-to-face group for abortion, marijuana use, transactional sex, coerced sex and number of lifetime sexual partners, because of increased reporting at follow-up using audio-CASI. CONCLUSION Although the analysis of internal consistency at enrollment suggests that computerized interviewing may increase random measurement error, it appears to reduce social desirability bias and encourage higher reporting of sensitive behaviors. PMID:19201677

  15. Sensitivity of photooxidant production in the Milan Basin: An overview of results from a EUROTRAC-2 Limitation of Oxidant Production field experiment

    NASA Astrophysics Data System (ADS)

    Neftel, Albrecht; Spirig, Christoph; PréVôT, André S. H.; Furger, Markus; Stutz, Jochen; Vogel, Bernhard; Hjorth, Jens

    2002-11-01

    The international field experiment Pianura Padana Produzione di Ozono (PIPAPO) studying the volatile organic compounds (VOC)/NOx ozone production sensitivity took place in May and June 1998 downwind of the metropolitan area of Milan. The project was embedded in the framework of the EUROTRAC-2 Limitation of Oxidant Production (LOOP) subproject. Several ground stations between the city of Milan and the Alps north of Milan combined with airborne measurements delivered a comprehensive data set suitable for observation-based analysis and validation of chemical transport models. The special section devoted to the PIPAPO project contains 10 contributions on the characterization of secondary aerosol formation, and radical precursors, and the characterization of ozone production sensitivity based on field measurements and numerical model simulations. In this paper the scientific background and the major objectives of PIPAPO are described. An overview of the field measurement program, the study site, and the meteorological conditions prevailing during the experiment are given. A general conclusion of the combined results is that under typical summer conditions in the Milan area with clear skies, low wind speeds and high temperatures, the transition from VOC- to NOx-sensitive ozone production occurs a few tens of kilometers downwind of the strongest emission sources in the city of Milan.

  16. Brief report: oxytocin enhances paternal sensitivity to a child with autism: a double-blind within-subject experiment with intranasally administered oxytocin.

    PubMed

    Naber, Fabiënne B A; Poslawsky, Irina E; van Ijzendoorn, Marinus H; van Engeland, Herman; Bakermans-Kranenburg, Marian J

    2013-01-01

    Oxytocin seems associated with parenting style, and experimental work showed positive effects of intranasally administered oxytocin on parenting style of fathers. Here, the first double-blind, placebo-controlled, within-subject experiment with intranasal oxytocin administration to fathers of children with autism spectrum disorder (ASD) is presented. Fathers with their typically developing toddler (n = 18), and fathers of toddlers diagnosed with ASD (n = 14), were observed in two play sessions of 15 min each with an intervening period of 1 week. In all fathers oxytocin elevated the quality of paternal sensitive play: fathers stimulated their child in a more optimal way, and they showed less hostility which suggests the positive effects of oxytocin on paternal sensitive play irrespective of clinical status of their child. PMID:22544470

  17. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  18. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  19. WRF model performance and sensitivity to model physics in a medium- and high-resolution downscaling experiment for West Africa

    NASA Astrophysics Data System (ADS)

    Klein, Cornelia; Bliefernicht, Jan; Heinzeller, Dominikus; Arnault, Joel; Kunstmann, Harald

    2014-05-01

    In order to develop and improve a Regional Climate Model (RCM) system for the West African region, we aim for an optimization of the Weather Research and Forecasting (WRF) model driven by ERA-Interim (ERA-I). The model provides numerous tuning options and physical parameterizations. It is well known that different model configurations and spatial resolutions have a strong impact on the simulation results. So far, there is a lack of studies addressing these questions in detail for the WRF model in this region. Therefore, an important first step is to test the model's performance and sensitivity for various model physics and for different spatial resolutions. The rainy seasons of 1999 (wet) and 2002 (dry) are simulated at a medium resolution of 24 km over a domain enclosing the West African Monsoon (WAM) system. Different combinations of model physics (cumulus, microphysics and planetary boundary layer parameterizations) are tested. Simulation results are compared to observational data (Tropical Rainfall Measuring Mission (TRMM), Climatic Research Unit (CRU), Global Precipitation Climatology Centre (GPCC) and station data of national meteorological services) and analyzed in terms of parameterization-specific differences and their causes. Our results show that the choice of model physics significantly influences the dynamics and hence the representation of the WAM transition. With respect to TRMM, the average precipitation bias in 1999 ranges from -3.3 to 1.4 mm/day at the Guinean Coast and from -1.8 to 2.7 mm/day in the Sahel. The latitudinal position of the African Easterly Jet during the WAM strongly depends on the strength of simulated monsoonal westerly winds. For August 1999, the average position of the southern edge of its core ranges from 9.5°N to 14°N between the various simulations, introducing a marked dry or wet regime in the Sahel, respectively, emphasizing the sensitivity of the model results on the physics choice. In comparison to ERA-I, the

  20. Addition of docetaxel or bisphosphonates to standard of care in men with localised or metastatic, hormone-sensitive prostate cancer: a systematic review and meta-analyses of aggregate data

    PubMed Central

    Vale, Claire L; Burdett, Sarah; Rydzewska, Larysa H M; Albiges, Laurence; Clarke, Noel W; Fisher, David; Fizazi, Karim; Gravis, Gwenaelle; James, Nicholas D; Mason, Malcolm D; Parmar, Mahesh K B; Sweeney, Christopher J; Sydes, Matthew R; Tombal, Bertrand; Tierney, Jayne F

    2016-01-01

    Summary Background Results from large randomised controlled trials combining docetaxel or bisphosphonates with standard of care in hormone-sensitive prostate cancer have emerged. In order to investigate the effects of these therapies and to respond to emerging evidence, we aimed to systematically review all relevant trials using a framework for adaptive meta-analysis. Methods For this systematic review and meta-analysis, we searched MEDLINE, Embase, LILACS, and the Cochrane Central Register of Controlled Trials, trial registers, conference proceedings, review articles, and reference lists of trial publications for all relevant randomised controlled trials (published, unpublished, and ongoing) comparing either standard of care with or without docetaxel or standard of care with or without bisphosphonates for men with high-risk localised or metastatic hormone-sensitive prostate cancer. For each trial, we extracted hazard ratios (HRs) of the effects of docetaxel or bisphosphonates on survival (time from randomisation until death from any cause) and failure-free survival (time from randomisation to biochemical or clinical failure or death from any cause) from published trial reports or presentations or obtained them directly from trial investigators. HRs were combined using the fixed-effect model (Mantel-Haenzsel). Findings We identified five eligible randomised controlled trials of docetaxel in men with metastatic (M1) disease. Results from three (CHAARTED, GETUG-15, STAMPEDE) of these trials (2992 [93%] of 3206 men randomised) showed that the addition of docetaxel to standard of care improved survival. The HR of 0·77 (95% CI 0·68–0·87; p<0·0001) translates to an absolute improvement in 4-year survival of 9% (95% CI 5–14). Docetaxel in addition to standard of care also improved failure-free survival, with the HR of 0·64 (0·58–0·70; p<0·0001) translating into a reduction in absolute 4-year failure rates of 16% (95% CI 12–19). We identified 11 trials of

  1. Foster children's attachment behavior and representation: Influence of children's pre-placement experiences and foster caregiver's sensitivity.

    PubMed

    Bovenschen, Ina; Lang, Katrin; Zimmermann, Janin; Förthner, Judith; Nowacki, Katja; Roland, Inga; Spangler, Gottfried

    2016-01-01

    Although the majority of foster children have been exposed to early adversity in their biological families and have experienced one or more disruptions of attachment relationships, most studies surprisingly found foster children to be as securely attached as children in low-risk samples. However, attention has been paid almost exclusively to attachment formation in young children up to two years of age, and the majority of studies solely investigated attachment behavior whereas few is known about foster children's representations about attachment relationships. To extend findings on attachment in foster children and its predictors, our study examined both attachment behavior and representations in foster children aged between 3 and 8 years. Diverse potential predictors including child variables, birth parents' variables, pre-placement experiences, and foster caregiver's behavior were included in the analyses. Results revealed that foster children showed both lower attachment security and higher disorganization scores than children in low-risk samples. Attachment behavior and representation were found to be widely independent from each other. Different factors contributed to attachment behavior and representation: whereas foster children's attachment behavior was mainly influenced by foster parents' behavior, pre-placement experiences did predict hyperactivation and disorganization on the representational level. The results indicate that, when intervening with foster families, it seems crucial to focus not exclusively on the promotion of secure attachment behavior but also to develop interventions enhancing secure and organized attachment representations. PMID:26412616

  2. Online Focus Group Discussion is a Valid and Feasible Mode When Investigating Sensitive Topics Among Young Persons With a Cancer Experience

    PubMed Central

    Eriksson, Lars E; Nilsson, Jenny; Jervaeus, Anna; Lampic, Claudia

    2016-01-01

    Background Clinical research often lacks participants of young age. Adding to the small amount of scientific studies that focus on the population entering adulthood, there are also difficulties to recruit them. To overcome this, there is a need to develop and scientifically evaluate modes for data collection that are suitable for adolescents and young adults. With this in mind we performed 39 online focus group discussions among young survivors of childhood cancer to explore thoughts and experiences around dating, being intimate with someone, and having children. Objective The aim of the study was to evaluate online focus group discussions as a mode for data collection on sensitive issues among young persons with a cancer experience. Methods One hundred thirty-three young persons (16-25 years) previously diagnosed with cancer, participated in 39 synchronous online focus group discussions (response rate 134/369, 36%). The mode of administration was evaluated by analyzing participant characteristics and interactions during discussions, as well as group members’ evaluations of the discussions. Results Persons diagnosed with central nervous tumors (n=30, 27%) participated to a lower extent than those with other cancer types (n=103, 39%; χ 2= 4.89, P=.03). The participants described various health impairments that correspond to what would be expected among cancer survivors including neuropsychiatric conditions and writing disabilities. Even though participants were interested in others’ experiences, sexual issues needed more probing by the moderators than did fertility-related issues. Group evaluations revealed that participants appreciated communicating on the suggested topics and thought that it was easier to discuss sex when it was possible to be anonymous toward other group members. Conclusions Online focus group discussions, with anonymous participation, are suggested to be a feasible and valid mode for collecting sensitive data among young persons with a

  3. Eu3+ uptake by calcite: preliminary results from coprecipitation experiments and observations with surface-sensitive techniques.

    PubMed

    Stipp, S L S; Lakshtanov, L Z; Jensen, J T; Baker, J A

    2003-03-01

    A lack of information in databases for contamination risk assessment about the transport behaviour of the trivalent f-orbital elements in groundwater systems where calcite is at equilibrium motivated this study of Eu(3+) uptake. The free drift technique was used to examine the effects of Eu(3+) concentration, presence of Na(+) or K(+) and temperature, as well as calcite nucleation and precipitation kinetics, on the partitioning of calcite. Changes in surface composition and morphology resulting from exposure of single crystals of Iceland spar to Eu(3+)-bearing solutions were observed with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). First results confirm that calcite has high affinity for Eu(3+). Rates of nucleation and precipitation strongly affect the extent of uptake but the presence of Na(+) and K(+) has no effect, suggesting formation of solid solution as CaCO(3)-EuOHCO(3). Surface-sensitive techniques prove that Eu(3+) is adsorbed to calcite even when the surface is dissolving and adsorption is not accompanied by precipitation of a separate Eu(3+)-solid phase. Adsorbed Eu modifies calcite's dissolution behaviour, roughening terraces and rounding step edges, and producing surface morphology where some surface sites appear blocked. Results imply that Eu(3+) concentrations in natural calcites are limited by Eu(3+) availability rather than by a lack of ability to fit into calcite's atomic structure. This behaviour can probably be expected for other trivalent rare Earth elements (REE), actinides and fission products whose behaviour is similar to that of Eu(3+). These elements are likely to be incorporated within the calcite bulk in systems where it is precipitating and the demonstrated strong partitioning ensures some uptake even where calcite is at or under saturation. PMID:12598092

  4. Solar Variability and the Near-Earth Environment: Mining Enhanced Low Dose Rate Sensitivity Data From the Microelectronics and Photonics Test Bed Space Experiment

    NASA Technical Reports Server (NTRS)

    Turflinger, T.; Schmeichel, W.; Krieg, J.; Titus, J.; Campbell, A.; Reeves, M.; Marshall (P.); Hardage, Donna (Technical Monitor)

    2004-01-01

    This effort is a detailed analysis of existing microelectronics and photonics test bed satellite data from one experiment, the bipolar test board, looking to improve our understanding of the enhanced low dose rate sensitivity (ELDRS) phenomenon. Over the past several years, extensive total dose irradiations of bipolar devices have demonstrated that many of these devices exhibited ELDRS. In sensitive bipolar transistors, ELDRS produced enhanced degradation of base current, resulting in enhanced gain degradation at dose rates <0.1 rd(Si)/s compared to similar transistors irradiated at dose rates >1 rd(Si)/s. This Technical Publication provides updated information about the test devices, the in-flight experiment, and both flight-and ground-based observations. Flight data are presented for the past 5 yr of the mission. These data are compared to ground-based data taken on devices from the same date code lots. Information about temperature fluctuations, power shutdowns, and other variables encountered during the space flight are documented.

  5. A direct sensitivity comparison between flow-modulated comprehensive 2D and 1D GC in untargeted and targeted MS-based experiments.

    PubMed

    Tranchida, Peter Q; Franchina, Flavio A; Zoccali, Mariosimone; Bonaccorsi, Ivana; Cacciola, Francesco; Mondello, Luigi

    2013-09-01

    The present contribution is focused on the measurement of the analytical sensitivity attained in untargeted/targeted MS/MS experiments, performed using flow-modulator comprehensive 2D and 1D GC. The comprehensive 2D experiment was performed by diverting part of the high flow (circa 80%) to flush the accumulation loop (about 28 mL/min) to waste, to reduce the gas flow entering the ion source. 1D analyses were performed through: (i) unmodulated and (ii) single column applications. An equivalent temperature program was applied in the modulated and unmodulated analyses, while a faster one was employed in the single column one. In all application types, the (same) triple quadrupole instrument was operated in the full-scan and multiple reaction monitoring modes. A genuine sweet orange oil and the same sample spiked with 20 phytosanitary compounds were employed to reach the research objective. The results highlight the problems related to the flow modulation-MS combination. Specifically, it was found that sensitivity was on average three to four times higher in unmodulated and optimized single-column applications. PMID:23868497

  6. Summary of the ATLAS experiment's sensitivity to supersymmetry after LHC Run 1 — interpreted in the phenomenological MSSM

    NASA Astrophysics Data System (ADS)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdinov, O.; Aben, R.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; Abulaiti, Y.; Acharya, B. S.; Adamczyk, L.; Adams, D. L.; Adelman, J.; Adomeit, S.; Adye, T.; Affolder, A. A.; Agatonovic-Jovin, T.; Agricola, J.; Aguilar-Saavedra, J. A.; Ahlen, S. P.; Ahmadov, F.; Aielli, G.; Akerstedt, H.; Åkesson, T. P. A.; Akimov, A. V.; Alberghi, G. L.; Albert, J.; Albrand, S.; Alconada Verzini, M. J.; Aleksa, M.; Aleksandrov, I. N.; Alexa, C.; Alexander, G.; Alexopoulos, T.; Alhroob, M.; Alimonti, G.; Alio, L.; Alison, J.; Alkire, S. P.; Allbrooke, B. M. M.; Allport, P. P.; Aloisio, A.; Alonso, A.; Alonso, F.; Alpigiani, C.; Altheimer, A.; Alvarez Gonzalez, B.; Álvarez Piqueras, D.; Alviggi, M. G.; Amadio, B. T.; Amako, K.; Amaral Coutinho, Y.; Amelung, C.; Amidei, D.; Amor Dos Santos, S. P.; Amorim, A.; Amoroso, S.; Amram, N.; Amundsen, G.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anders, J. K.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Angelidakis, S.; Angelozzi, I.; Anger, P.; Angerami, A.; Anghinolfi, F.; Anisenkov, A. V.; Anjos, N.; Annovi, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoki, M.; Aperio Bella, L.; Arabidze, G.; Arai, Y.; Araque, J. P.; Arce, A. T. H.; Arduh, F. A.; Arguin, J.-F.; Argyropoulos, S.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnold, H.; Arratia, M.; Arslan, O.; Artamonov, A.; Artoni, G.; Asai, S.; Asbah, N.; Ashkenazi, A.; Åsman, B.; Asquith, L.; Assamagan, K.; Astalos, R.; Atkinson, M.; Atlay, N. B.; Augsten, K.; Aurousseau, M.; Avolio, G.; Axen, B.; Ayoub, M. K.; Azuelos, G.; Baak, M. A.; Baas, A. E.; Baca, M. J.; Bacci, C.; Bachacou, H.; Bachas, K.; Backes, M.; Backhaus, M.; Bagiacchi, P.; Bagnaia, P.; Bai, Y.; Bain, T.; Baines, J. T.; Baker, O. K.; Baldin, E. M.; Balek, P.; Balestri, T.; Balli, F.; Balunas, W. K.; Banas, E.; Banerjee, Sw.; Bannoura, A. A. E.; Barak, L.; Barberio, E. L.; Barberis, D.; Barbero, M.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnes, S. L.; Barnett, B. M.; Barnett, R. M.; Barnovska, Z.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Bartoldus, R.; Barton, A. E.; Bartos, P.; Basalaev, A.; Bassalat, A.; Basye, A.; Bates, R. L.; Batista, S. J.; Batley, J. R.; Battaglia, M.; Bauce, M.; Bauer, F.; Bawa, H. S.; Beacham, J. B.; Beattie, M. D.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Becker, K.; Becker, M.; Beckingham, M.; Becot, C.; Beddall, A. J.; Beddall, A.; Bednyakov, V. A.; Bee, C. P.; Beemster, L. J.; Beermann, T. A.; Begel, M.; Behr, J. K.; Belanger-Champagne, C.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellerive, A.; Bellomo, M.; Belotskiy, K.; Beltramello, O.; Benary, O.; Benchekroun, D.; Bender, M.; Bendtz, K.; Benekos, N.; Benhammou, Y.; Benhar Noccioli, E.; Benitez Garcia, J. A.; Benjamin, D. P.; Bensinger, J. R.; Bentvelsen, S.; Beresford, L.; Beretta, M.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Beringer, J.; Bernard, C.; Bernard, N. R.; Bernius, C.; Bernlochner, F. U.; Berry, T.; Berta, P.; Bertella, C.; Bertoli, G.; Bertolucci, F.; Bertsche, C.; Bertsche, D.; Besana, M. I.; Besjes, G. J.; Bessidskaia Bylund, O.; Bessner, M.; Besson, N.; Betancourt, C.; Bethke, S.; Bevan, A. J.; Bhimji, W.; Bianchi, R. M.; Bianchini, L.; Bianco, M.; Biebel, O.; Biedermann, D.; Bieniek, S. P.; Biesuz, N. V.; Biglietti, M.; Bilbao De Mendizabal, J.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biondi, S.; Bjergaard, D. M.; Black, C. W.; Black, J. E.; Black, K. M.; Blackburn, D.; Blair, R. E.; Blanchard, J.-B.; Blanco, J. E.; Blazek, T.; Bloch, I.; Blocker, C.; Blum, W.; Blumenschein, U.; Blunier, S.; Bobbink, G. J.; Bobrovnikov, V. S.; Bocchetta, S. S.; Bocci, A.; Bock, C.; Boehler, M.; Bogaerts, J. A.; Bogavac, D.; Bogdanchikov, A. G.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Boldyrev, A. S.; Bomben, M.; Bona, M.; Boonekamp, M.; Borisov, A.; Borissov, G.; Borroni, S.; Bortfeldt, J.; Bortolotto, V.; Bos, K.; Boscherini, D.; Bosman, M.; Boudreau, J.; Bouffard, J.; Bouhova-Thacker, E. V.; Boumediene, D.; Bourdarios, C.; Bousson, N.; Boutle, S. K.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozic, I.; Bracinik, J.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Breaden Madden, W. D.; Brendlinger, K.; Brennan, A. J.; Brenner, L.; Brenner, R.; Bressler, S.; Bristow, K.; Bristow, T. M.; Britton, D.; Britzger, D.; Brochu, F. M.; Brock, I.; Brock, R.; Bronner, J.; Brooijmans, G.; Brooks, T.; Brooks, W. K.; Brosamer, J.; Brost, E.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Bruni, A.; Bruni, G.; Bruschi, M.; Bruscino, N.; Bryngemark, L.; Buanes, T.; Buat, Q.; Buchholz, P.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Buehrer, F.; Bugge, L.; Bugge, M. K.; Bulekov, O.; Bullock, D.; Burckhart, H.; Burdin, S.; Burgard, C. D.; Burghgrave, B.; Burke, S.; Burmeister, I.; Busato, E.; Büscher, D.; Büscher, V.; Bussey, P.; Butler, J. M.; Butt, A. I.; Buttar, C. M.; Butterworth, J. M.; Butti, P.; Buttinger, W.; Buzatu, A.; Buzykaev, A. R.; Cabrera Urbán, S.; Caforio, D.; Cairo, V. M.; Cakir, O.; Calace, N.; Calafiura, P.; Calandri, A.; Calderini, G.; Calfayan, P.; Caloba, L. P.; Calvet, D.; Calvet, S.; Camacho Toro, R.; Camarda, S.; Camarri, P.; Cameron, D.; Caminal Armadans, R.; Campana, S.; Campanelli, M.; Campoverde, A.; Canale, V.; Canepa, A.; Cano Bret, M.; Cantero, J.; Cantrill, R.; Cao, T.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capua, M.; Caputo, R.; Carbone, R. M.; Cardarelli, R.; Cardillo, F.; Carli, T.; Carlino, G.; Carminati, L.; Caron, S.; Carquin, E.; Carrillo-Montoya, G. D.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Casolino, M.; Castaneda-Miranda, E.; Castelli, A.; Castillo Gimenez, V.; Castro, N. F.; Catastini, P.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Caudron, J.; Cavaliere, V.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerio, B. C.; Cerny, K.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cerv, M.; Cervelli, A.; Cetin, S. A.; Chafaq, A.; Chakraborty, D.; Chalupkova, I.; Chang, P.; Chapman, J. D.; Charlton, D. G.; Chau, C. C.; Chavez Barajas, C. A.; Cheatham, S.; Chegwidden, A.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, K.; Chen, L.; Chen, S.; Chen, S.; Chen, X.; Chen, Y.; Cheng, H. C.; Cheng, Y.; Cheplakov, A.; Cheremushkina, E.; Cherkaoui El Moursli, R.; Chernyatin, V.; Cheu, E.; Chevalier, L.; Chiarella, V.; Chiarelli, G.; Chiodini, G.; Chisholm, A. S.; Chislett, R. T.; Chitan, A.; Chizhov, M. V.; Choi, K.; Chouridou, S.; Chow, B. K. B.; Christodoulou, V.; Chromek-Burckhart, D.; Chudoba, J.; Chuinard, A. J.; Chwastowski, J. J.; Chytka, L.; Ciapetti, G.; Ciftci, A. K.; Cinca, D.; Cindro, V.; Cioara, I. A.; Ciocio, A.; Cirotto, F.; Citron, Z. H.; Ciubancan, M.; Clark, A.; Clark, B. L.; Clark, P. J.; Clarke, R. N.; Clement, C.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coffey, L.; Cogan, J. G.; Colasurdo, L.; Cole, B.; Cole, S.; Colijn, A. P.; Collot, J.; Colombo, T.; Compostella, G.; Conde Muiño, P.; Coniavitis, E.; Connell, S. H.; Connelly, I. A.; Consorti, V.; Constantinescu, S.; Conta, C.; Conti, G.; Conventi, F.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Corso-Radu, A.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Côté, D.; Cottin, G.; Cowan, G.; Cox, B. E.; Cranmer, K.; Cree, G.; Crépé-Renaudin, S.; Crescioli, F.; Cribbs, W. A.; Crispin Ortuzar, M.; Cristinziani, M.; Croft, V.; Crosetti, G.; Cuhadar Donszelmann, T.; Cummings, J.; Curatolo, M.; Cúth, J.; Cuthbert, C.; Czirr, H.; Czodrowski, P.; D'Auria, S.; D'Onofrio, M.; Da Cunha Sargedas De Sousa, M. J.; Da Via, C.; Dabrowski, W.; Dafinca, A.; Dai, T.; Dale, O.; Dallaire, F.; Dallapiccola, C.; Dam, M.; Dandoy, J. R.; Dang, N. P.; Daniells, A. C.; Danninger, M.; Dano Hoffmann, M.; Dao, V.; Darbo, G.; Darmora, S.; Dassoulas, J.; Dattagupta, A.; Davey, W.; David, C.; Davidek, T.; Davies, E.; Davies, M.; Davison, P.; Davygora, Y.; Dawe, E.; Dawson, I.; Daya-Ishmukhametova, R. K.; De, K.; de Asmundis, R.; De Benedetti, A.; De Castro, S.; De Cecco, S.; De Groot, N.; de Jong, P.; De la Torre, H.; De Lorenzi, F.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J. B.; Dearnaley, W. J.; Debbe, R.; Debenedetti, C.; Dedovich, D. V.; Deigaard, I.; Del Peso, J.; Del Prete, T.; Delgove, D.; Deliot, F.; Delitzsch, C. M.; Deliyergiyev, M.; Dell'Acqua, A.; Dell'Asta, L.; Dell'Orso, M.; Della Pietra, M.; della Volpe, D.; Delmastro, M.; Delsart, P. A.; Deluca, C.; DeMarco, D. A.; Demers, S.; Demichev, M.; Demilly, A.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Deterre, C.; Deviveiros, P. O.; Dewhurst, A.; Dhaliwal, S.; Di Ciaccio, A.; Di Ciaccio, L.; Di Domenico, A.; Di Donato, C.; Di Girolamo, A.; Di Girolamo, B.; Di Mattia, A.; Di Micco, B.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Di Valentino, D.; Diaconu, C.; Diamond, M.; Dias, F. A.; Diaz, M. A.; Diehl, E. B.; Dietrich, J.; Diglio, S.; Dimitrievska, A.; Dingfelder, J.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; Djuvsland, J. I.; do Vale, M. A. B.; Dobos, D.; Dobre, M.; Doglioni, C.; Dohmae, T.; Dolejsi, J.; Dolezal, Z.; Dolgoshein, B. A.; Donadelli, M.; Donati, S.; Dondero, P.; Donini, J.; Dopke, J.; Doria, A.; Dova, M. T.; Doyle, A. T.; Drechsler, E.; Dris, M.; Dubreuil, E.; Duchovni, E.; Duckeck, G.; Ducu, O. A.; Duda, D.; Dudarev, A.; Duflot, L.; Duguid, L.; Dührssen, M.; Dunford, M.; Duran Yildiz, H.; Düren, M.; Durglishvili, A.; Duschinger, D.; Dutta, B.; Dyndal, M.; Eckardt, C.; Ecker, K. M.; Edgar, R. C.; Edson, W.; Edwards, N. C.; Ehrenfeld, W.; Eifert, T.; Eigen, G.; Einsweiler, K.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Elliot, A. A.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Emeliyanov, D.; Enari, Y.; Endner, O. C.; Endo, M.; Erdmann, J.; Ereditato, A.; Ernis, G.; Ernst, J.; Ernst, M.; Errede, S.; Ertel, E.; Escalier, M.; Esch, H.; Escobar, C.; Esposito, B.; Etienvre, A. I.; Etzion, E.; Evans, H.; Ezhilov, A.; Fabbri, L.; Facini, G.; Fakhrutdinov, R. M.; Falciano, S.; Falla, R. J.; Faltova, J.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farooque, T.; Farrell, S.; Farrington, S. M.; Farthouat, P.; Fassi, F.; Fassnacht, P.; Fassouliotis, D.; Faucci Giannelli, M.; Favareto, A.; Fawcett, W. J.; Fayard, L.; Fedin, O. L.; Fedorko, W.; Feigl, S.; Feligioni, L.; Feng, C.; Feng, E. J.; Feng, H.; Fenyuk, A. B.; Feremenga, L.; Fernandez Martinez, P.; Fernandez Perez, S.; Ferrando, J.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferreira de Lima, D. E.; Ferrer, A.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filipuzzi, M.; Filthaut, F.; Fincke-Keeler, M.; Finelli, K. D.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, A.; Fischer, C.; Fischer, J.; Fisher, W. C.; Flaschel, N.; Fleck, I.; Fleischmann, P.; Fletcher, G. T.; Fletcher, G.; Fletcher, R. R. M.; Flick, T.; Floderus, A.; Flores Castillo, L. R.; Flowerdew, M. J.; Formica, A.; Forti, A.; Fournier, D.; Fox, H.; Fracchia, S.; Francavilla, P.; Franchini, M.; Francis, D.; Franconi, L.; Franklin, M.; Frate, M.; Fraternali, M.; Freeborn, D.; French, S. T.; Friedrich, F.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fulsom, B. G.; Fusayasu, T.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gabrielli, A.; Gabrielli, A.; Gach, G. P.; Gadatsch, S.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Galhardo, B.; Gallas, E. J.; Gallop, B. J.; Gallus, P.; Galster, G.; Gan, K. K.; Gao, J.; Gao, Y.; Gao, Y. S.; Garay Walls, F. M.; Garberson, F.; García, C.; García Navarro, J. E.; Garcia-Sciveres, M.; Gardner, R. W.; Garelli, N.; Garonne, V.; Gatti, C.; Gaudiello, A.; Gaudio, G.; Gaur, B.; Gauthier, L.; Gauzzi, P.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gazis, E. N.; Ge, P.; Gecse, Z.; Gee, C. N. P.; Geich-Gimbel, Ch.; Geisler, M. P.; Gemme, C.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerbaudo, D.; Gershon, A.; Ghasemi, S.; Ghazlane, H.; Giacobbe, B.; Giagu, S.; Giangiobbe, V.; Giannetti, P.; Gibbard, B.; Gibson, S. M.; Gignac, M.; Gilchriese, M.; Gillam, T. P. S.; Gillberg, D.; Gilles, G.; Gingrich, D. M.; Giokaris, N.; Giordani, M. P.; Giorgi, F. M.; Giorgi, F. M.; Giraud, P. F.; Giromini, P.; Giugni, D.; Giuliani, C.; Giulini, M.; Gjelsten, B. K.; Gkaitatzis, S.; Gkialas, I.; Gkougkousis, E. L.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glaysher, P. C. F.; Glazov, A.; Goblirsch-Kolb, M.; Goddard, J. R.; Godlewski, J.; Goldfarb, S.; Golling, T.; Golubkov, D.; Gomes, A.; Gonçalo, R.; Goncalves Pinto Firmino Da Costa, J.; Gonella, L.; González de la Hoz, S.; Gonzalez Parra, G.; Gonzalez-Sevilla, S.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Goshaw, A. T.; Gössling, C.; Gostkin, M. I.; Goujdami, D.; Goussiou, A. G.; Govender, N.; Gozani, E.; Grabas, H. M. X.; Graber, L.; Grabowska-Bold, I.; Gradin, P. O. J.; Grafström, P.; Grahn, K.-J.; Gramling, J.; Gramstad, E.; Grancagnolo, S.; Gratchev, V.; Gray, H. M.; Graziani, E.; Greenwood, Z. D.; Grefe, C.; Gregersen, K.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grillo, A. A.; Grimm, K.; Grinstein, S.; Gris, Ph.; Grivaz, J.-F.; Grohs, J. P.; Grohsjean, A.; Gross, E.; Grosse-Knetter, J.; Grossi, G. C.; Grout, Z. J.; Guan, L.; Guenther, J.; Guescini, F.; Guest, D.; Gueta, O.; Guido, E.; Guillemin, T.; Guindon, S.; Gul, U.; Gumpert, C.; Guo, J.; Guo, Y.; Gupta, S.; Gustavino, G.; Gutierrez, P.; Gutierrez Ortiz, N. G.; Gutschow, C.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haber, C.; Hadavand, H. K.; Haddad, N.; Haefner, P.; Hageböck, S.; Hajduk, Z.; Hakobyan, H.; Haleem, M.; Haley, J.; Hall, D.; Halladjian, G.; Hallewell, G. D.; Hamacher, K.; Hamal, P.; Hamano, K.; Hamilton, A.; Hamity, G. N.; Hamnett, P. G.; Han, L.; Hanagaki, K.; Hanawa, K.; Hance, M.; Haney, B.; Hanke, P.; Hanna, R.; Hansen, J. B.; Hansen, J. D.; Hansen, M. C.; Hansen, P. H.; Hara, K.; Hard, A. S.; Harenberg, T.; Hariri, F.; Harkusha, S.; Harrington, R. D.; Harrison, P. F.; Hartjes, F.; Hasegawa, M.; Hasegawa, Y.; Hasib, A.; Hassani, S.; Haug, S.; Hauser, R.; Hauswald, L.; Havranek, M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, A. D.; Hayashi, T.; Hayden, D.; Hays, C. P.; Hays, J. M.; Hayward, H. S.; Haywood, S. J.; Head, S. J.; Heck, T.; Hedberg, V.; Heelan, L.; Heim, S.; Heim, T.; Heinemann, B.; Heinrich, L.; Hejbal, J.; Helary, L.; Hellman, S.; Hellmich, D.; Helsens, C.; Henderson, J.; Henderson, R. C. W.; Heng, Y.; Hengler, C.; Henkelmann, S.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Herbert, G. H.; Hernández Jiménez, Y.; Herten, G.; Hertenberger, R.; Hervas, L.; Hesketh, G. G.; Hessey, N. P.; Hetherly, J. W.; Hickling, R.; Higón-Rodriguez, E.; Hill, E.; Hill, J. C.; Hiller, K. H.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hinman, R. R.; Hirose, M.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoenig, F.; Hohlfeld, M.; Hohn, D.; Holmes, T. R.; Homann, M.; Hong, T. M.; Hopkins, W. H.; Horii, Y.; Horton, A. J.; Hostachy, J.-Y.; Hou, S.; Hoummada, A.; Howard, J.; Howarth, J.; Hrabovsky, M.; Hristova, I.; Hrivnac, J.; Hryn'ova, T.; Hrynevich, A.; Hsu, C.; Hsu, P. J.; Hsu, S.-C.; Hu, D.; Hu, Q.; Hu, X.; Huang, Y.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Huhtinen, M.; Hülsing, T. A.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibragimov, I.; Iconomidou-Fayard, L.; Ideal, E.; Idrissi, Z.; Iengo, P.; Igonkina, O.; Iizawa, T.; Ikegami, Y.; Ikematsu, K.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Ilic, N.; Ince, T.; Introzzi, G.; Ioannou, P.; Iodice, M.; Iordanidou, K.; Ippolito, V.; Irles Quiles, A.; Isaksson, C.; Ishino, M.; Ishitsuka, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Iturbe Ponce, J. M.; Iuppa, R.; Ivarsson, J.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jabbar, S.; Jackson, B.; Jackson, M.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakoubek, T.; Jakubek, J.; Jamin, D. O.; Jana, D. K.; Jansen, E.; Jansky, R.; Janssen, J.; Janus, M.; Jarlskog, G.; Javadov, N.; Javůrek, T.; Jeanty, L.; Jejelava, J.; Jeng, G.-Y.; Jennens, D.; Jenni, P.; Jentzsch, J.; Jeske, C.; Jézéquel, S.; Ji, H.; Jia, J.; Jiang, Y.; Jiggins, S.; Jimenez Pena, J.; Jin, S.; Jinaru, A.; Jinnouchi, O.; Joergensen, M. D.; Johansson, P.; Johns, K. A.; Johnson, W. J.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. J.; Jongmanns, J.; Jorge, P. M.; Joshi, K. D.; Jovicevic, J.; Ju, X.; Jussel, P.; Juste Rozas, A.; Kaci, M.; Kaczmarska, A.; Kado, M.; Kagan, H.; Kagan, M.; Kahn, S. J.; Kajomovitz, E.; Kalderon, C. W.; Kama, S.; Kamenshchikov, A.; Kanaya, N.; Kaneti, S.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kaplan, L. S.; Kapliy, A.; Kar, D.; Karakostas, K.; Karamaoun, A.; Karastathis, N.; Kareem, M. J.; Karentzos, E.; Karnevskiy, M.; Karpov, S. N.; Karpova, Z. M.; Karthik, K.; Kartvelishvili, V.; Karyukhin, A. N.; Kasahara, K.; Kashif, L.; Kass, R. D.; Kastanas, A.; Kataoka, Y.; Kato, C.; Katre, A.; Katzy, J.; Kawade, K.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kazama, S.; Kazanin, V. F.; Keeler, R.; Kehoe, R.; Keller, J. S.; Kempster, J. J.; Keoshkerian, H.; Kepka, O.; Kerševan, B. P.; Kersten, S.; Keyes, R. A.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharlamov, A. G.; Khoo, T. J.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kido, S.; Kim, H. Y.; Kim, S. H.; Kim, Y. K.; Kimura, N.; Kind, O. M.; King, B. T.; King, M.; King, S. B.; Kirk, J.; Kiryunin, A. E.; Kishimoto, T.; Kisielewska, D.; Kiss, F.; Kiuchi, K.; Kivernyk, O.; Kladiva, E.; Klein, M. H.; Klein, M.; Klein, U.; Kleinknecht, K.; Klimek, P.; Klimentov, A.; Klingenberg, R.; Klinger, J. A.; Klioutchnikova, T.; Kluge, E.-E.; Kluit, P.; Kluth, S.; Knapik, J.; Kneringer, E.; Knoops, E. B. F. G.; Knue, A.; Kobayashi, A.; Kobayashi, D.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kodys, P.; Koffas, T.; Koffeman, E.; Kogan, L. A.; Kohlmann, S.; Kohout, Z.; Kohriki, T.; Koi, T.; Kolanoski, H.; Kolb, M.; Koletsou, I.; Komar, A. A.; Komori, Y.; Kondo, T.; Kondrashova, N.; Köneke, K.; König, A. C.; Kono, T.; Konoplich, R.; Konstantinidis, N.; Kopeliansky, R.; Koperny, S.; Köpke, L.; Kopp, A. K.; Korcyl, K.; Kordas, K.; Korn, A.; Korol, A. A.; Korolkov, I.; Korolkova, E. V.; Kortner, O.; Kortner, S.; Kosek, T.; Kostyukhin, V. V.; Kotov, V. M.; Kotwal, A.; Kourkoumeli-Charalampidi, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kramarenko, V. A.; Kramberger, G.; Krasnopevtsev, D.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J. K.; Kravchenko, A.; Kreiss, S.; Kretz, M.; Kretzschmar, J.; Kreutzfeldt, K.; Krieger, P.; Krizka, K.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Krumnack, N.; Kruse, A.; Kruse, M. C.; Kruskal, M.; Kubota, T.; Kucuk, H.; Kuday, S.; Kuehn, S.; Kugel, A.; Kuger, F.; Kuhl, A.; Kuhl, T.; Kukhtin, V.; Kukla, R.; Kulchitsky, Y.; Kuleshov, S.; Kuna, M.; Kunigo, T.; Kupco, A.; Kurashige, H.; Kurochkin, Y. A.; Kus, V.; Kuwertz, E. S.; Kuze, M.; Kvita, J.; Kwan, T.; Kyriazopoulos, D.; La Rosa, A.; La Rosa Navarro, J. L.; La Rotonda, L.; Lacasta, C.; Lacava, F.; Lacey, J.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Lambourne, L.; Lammers, S.; Lampen, C. L.; Lampl, W.; Lançon, E.; Landgraf, U.; Landon, M. P. J.; Lang, V. S.; Lange, J. C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Lanza, A.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Lasagni Manghi, F.; Lassnig, M.; Laurelli, P.; Lavrijsen, W.; Law, A. T.; Laycock, P.; Lazovich, T.; Le Dortz, O.; Le Guirriec, E.; Le Menedeu, E.; LeBlanc, M.; LeCompte, T.; Ledroit-Guillon, F.; Lee, C. A.; Lee, S. C.; Lee, L.; Lefebvre, G.; Lefebvre, M.; Legger, F.; Leggett, C.; Lehan, A.; Lehmann Miotto, G.; Lei, X.; Leight, W. A.; Leisos, A.; Leister, A. G.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Lemmer, B.; Leney, K. J. C.; Lenz, T.; Lenzi, B.; Leone, R.; Leone, S.; Leonidopoulos, C.; Leontsinis, S.; Leroy, C.; Lester, C. G.; Levchenko, M.; Levêque, J.; Levin, D.; Levinson, L. J.; Levy, M.; Lewis, A.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, H. L.; Li, L.; Li, L.; Li, S.; Li, X.; Li, Y.; Liang, Z.; Liao, H.; Liberti, B.; Liblong, A.; Lichard, P.; Lie, K.; Liebal, J.; Liebig, W.; Limbach, C.; Limosani, A.; Lin, S. C.; Lin, T. H.; Linde, F.; Lindquist, B. E.; Linnemann, J. T.; Lipeles, E.; Lipniacka, A.; Lisovyi, M.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, B.; Liu, D.; Liu, H.; Liu, J.; Liu, J. B.; Liu, K.; Liu, L.; Liu, M.; Liu, M.; Liu, Y.; Livan, M.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lo Sterzo, F.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Loebinger, F. K.; Loevschall-Jensen, A. E.; Loew, K. M.; Loginov, A.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Long, B. A.; Long, J. D.; Long, R. E.; Looper, K. A.; Lopes, L.; Lopez Mateos, D.; Lopez Paredes, B.; Lopez Paz, I.; Lorenz, J.; Lorenzo Martinez, N.; Losada, M.; Lösel, P. J.; Lou, X.; Lounis, A.; Love, J.; Love, P. A.; Lu, N.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Luedtke, C.; Luehring, F.; Lukas, W.; Luminari, L.; Lundberg, O.; Lund-Jensen, B.; Lynn, D.; Lysak, R.; Lytken, E.; Ma, H.; Ma, L. L.; Maccarrone, G.; Macchiolo, A.; Macdonald, C. M.; Maček, B.; Machado Miguens, J.; Macina, D.; Madaffari, D.; Madar, R.; Maddocks, H. J.; Mader, W. F.; Madsen, A.; Maeda, J.; Maeland, S.; Maeno, T.; Maevskiy, A.; Magradze, E.; Mahboubi, K.; Mahlstedt, J.; Maiani, C.; Maidantchik, C.; Maier, A. A.; Maier, T.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Malaescu, B.; Malecki, Pa.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Malone, C.; Maltezos, S.; Malyshev, V. M.; Malyukov, S.; Mamuzic, J.; Mancini, G.; Mandelli, B.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Manfredini, A.; Manhaes de Andrade Filho, L.; Manjarres Ramos, J.; Mann, A.; Manousakis-Katsikakis, A.; Mansoulie, B.; Mantifel, R.; Mantoani, M.; Mapelli, L.; March, L.; Marchiori, G.; Marcisovsky, M.; Marino, C. P.; Marjanovic, M.; Marley, D. E.; Marroquim, F.; Marsden, S. P.; Marshall, Z.; Marti, L. F.; Marti-Garcia, S.; Martin, B.; Martin, T. A.; Martin, V. J.; Martin dit Latour, B.; Martinez, M.; Martin-Haugh, S.; Martoiu, V. S.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Massa, I.; Massa, L.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Mättig, P.; Mattmann, J.; Maurer, J.; Maxfield, S. J.; Maximov, D. A.; Mazini, R.; Mazza, S. M.; Mc Goldrick, G.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; Mcfayden, J. A.; Mchedlidze, G.; McMahon, S. J.; McPherson, R. A.; Medinnis, M.; Meehan, S.; Mehlhase, S.; Mehta, A.; Meier, K.; Meineck, C.; Meirose, B.; Mellado Garcia, B. R.; Meloni, F.; Mengarelli, A.; Menke, S.; Meoni, E.; Mercurio, K. M.; Mergelmeyer, S.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meyer, C.; Meyer, C.; Meyer, J.-P.; Meyer, J.; Meyer Zu Theenhausen, H.; Middleton, R. P.; Miglioranzi, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Milesi, M.; Milic, A.; Miller, D. W.; Mills, C.; Milov, A.; Milstead, D. A.; Minaenko, A. A.; Minami, Y.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mistry, K. P.; Mitani, T.; Mitrevski, J.; Mitsou, V. A.; Miucci, A.; Miyagawa, P. S.; Mjörnmark, J. U.; Moa, T.; Mochizuki, K.; Mohapatra, S.; Mohr, W.; Molander, S.; Moles-Valls, R.; Monden, R.; Mönig, K.; Monini, C.; Monk, J.; Monnier, E.; Montalbano, A.; Montejo Berlingen, J.; Monticelli, F.; Monzani, S.; Moore, R. W.; Morange, N.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Mori, D.; Mori, T.; Morii, M.; Morinaga, M.; Morisbak, V.; Moritz, S.; Morley, A. K.; Mornacchi, G.; Morris, J. D.; Mortensen, S. S.; Morton, A.; Morvaj, L.; Mosidze, M.; Moss, J.; Motohashi, K.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Muanza, S.; Mudd, R. D.; Mueller, F.; Mueller, J.; Mueller, R. S. P.; Mueller, T.; Muenstermann, D.; Mullen, P.; Mullier, G. A.; Murillo Quijada, J. A.; Murray, W. J.; Musheghyan, H.; Musto, E.; Myagkov, A. G.; Myska, M.; Nachman, B. P.; Nackenhorst, O.; Nadal, J.; Nagai, K.; Nagai, R.; Nagai, Y.; Nagano, K.; Nagarkar, A.; Nagasaka, Y.; Nagata, K.; Nagel, M.; Nagy, E.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakamura, T.; Nakano, I.; Namasivayam, H.; Naranjo Garcia, R. F.; Narayan, R.; Narrias Villar, D. I.; Naumann, T.; Navarro, G.; Nayyar, R.; Neal, H. A.; Nechaeva, P. Yu.; Neep, T. J.; Nef, P. D.; Negri, A.; Negrini, M.; Nektarijevic, S.; Nellist, C.; Nelson, A.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Neubauer, M. S.; Neumann, M.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nguyen, D. H.; Nickerson, R. B.; Nicolaidou, R.; Nicquevert, B.; Nielsen, J.; Nikiforou, N.; Nikiforov, A.; Nikolaenko, V.; Nikolic-Audit, I.; Nikolopoulos, K.; Nilsen, J. K.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nisius, R.; Nobe, T.; Nomachi, M.; Nomidis, I.; Nooney, T.; Norberg, S.; Nordberg, M.; Novgorodova, O.; Nowak, S.; Nozaki, M.; Nozka, L.; Ntekas, K.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; Nuti, F.; O'Brien, B. J.; O'grady, F.; O'Neil, D. C.; O'Shea, V.; Oakham, F. G.; Oberlack, H.; Obermann, T.; Ocariz, J.; Ochi, A.; Ochoa, I.; Ochoa-Ricoux, J. P.; Oda, S.; Odaka, S.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohman, H.; Oide, H.; Okamura, W.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olariu, A.; Olivares Pino, S. A.; Oliveira Damazio, D.; Olszewski, A.; Olszowska, J.; Onofre, A.; Onogi, K.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlando, N.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Otero y Garzon, G.; Otono, H.; Ouchrif, M.; Ould-Saada, F.; Ouraou, A.; Oussoren, K. P.; Ouyang, Q.; Ovcharova, A.; Owen, M.; Owen, R. E.; Ozcan, V. E.; Ozturk, N.; Pachal, K.; Pacheco Pages, A.; Padilla Aranda, C.; Pagáčová, M.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pais, P.; Pajchel, K.; Palacino, G.; Palestini, S.; Palka, M.; Pallin, D.; Palma, A.; Pan, Y. B.; St. Panagiotopoulou, E.; Pandini, C. E.; Panduro Vazquez, J. G.; Pani, P.; Panitkin, S.; Pantea, D.; Paolozzi, L.; Papadopoulou, Th. D.; Papageorgiou, K.; Paramonov, A.; Paredes Hernandez, D.; Parker, M. A.; Parker, K. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pasqualucci, E.; Passaggio, S.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N. D.; Pater, J. R.; Pauly, T.; Pearce, J.; Pearson, B.; Pedersen, L. E.; Pedersen, M.; Pedraza Lopez, S.; Pedro, R.; Peleganchuk, S. V.; Pelikan, D.; Penc, O.; Peng, C.; Peng, H.; Penning, B.; Penwell, J.; Perepelitsa, D. V.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perini, L.; Pernegger, H.; Perrella, S.; Peschke, R.; Peshekhonov, V. D.; Peters, K.; Peters, R. F. Y.; Petersen, B. A.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petroff, P.; Petrolo, E.; Petrucci, F.; Pettersson, N. E.; Pezoa, R.; Phillips, P. W.; Piacquadio, G.; Pianori, E.; Picazio, A.; Piccaro, E.; Piccinini, M.; Pickering, M. A.; Piegaia, R.; Pignotti, D. T.; Pilcher, J. E.; Pilkington, A. D.; Pin, A. W. J.; Pina, J.; Pinamonti, M.; Pinfold, J. L.; Pingel, A.; Pires, S.; Pirumov, H.; Pitt, M.; Pizio, C.; Plazak, L.; Pleier, M.-A.; Pleskot, V.; Plotnikova, E.; Plucinski, P.; Pluth, D.; Poettgen, R.; Poggioli, L.; Pohl, D.; Polesello, G.; Poley, A.; Policicchio, A.; Polifka, R.; Polini, A.; Pollard, C. S.; Polychronakos, V.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Pospisil, S.; Potamianos, K.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Pozdnyakov, V.; Pralavorio, P.; Pranko, A.; Prasad, S.; Prell, S.; Price, D.; Price, L. E.; Primavera, M.; Prince, S.; Proissl, M.; Prokofiev, K.; Prokoshin, F.; Protopapadaki, E.; Protopopescu, S.; Proudfoot, J.; Przybycien, M.; Ptacek, E.; Puddu, D.; Pueschel, E.; Puldon, D.; Purohit, M.; Puzo, P.; Qian, J.; Qin, G.; Qin, Y.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Queitsch-Maitland, M.; Quilty, D.; Raddum, S.; Radeka, V.; Radescu, V.; Radhakrishnan, S. K.; Radloff, P.; Rados, P.; Ragusa, F.; Rahal, G.; Rajagopalan, S.; Rammensee, M.; Rangel-Smith, C.; Rauscher, F.; Rave, S.; Ravenscroft, T.; Raymond, M.; Read, A. L.; Readioff, N. P.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Rehnisch, L.; Reichert, J.; Reisin, H.; Rembser, C.; Ren, H.; Renaud, A.; Rescigno, M.; Resconi, S.; Rezanova, O. L.; Reznicek, P.; Rezvani, R.; Richter, R.; Richter, S.; Richter-Was, E.; Ricken, O.; Ridel, M.; Rieck, P.; Riegel, C. J.; Rieger, J.; Rifki, O.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Ristić, B.; Ritsch, E.; Riu, I.; Rizatdinova, F.; Rizvi, E.; Rizzo, T. G.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robson, A.; Roda, C.; Roe, S.; Røhne, O.; Rolli, S.; Romaniouk, A.; Romano, M.; Romano Saez, S. M.; Romero Adam, E.; Rompotis, N.; Ronzani, M.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, P.; Rosendahl, P. L.; Rosenthal, O.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rosten, J. H. N.; Rosten, R.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubbo, F.; Rubinskiy, I.; Rud, V. I.; Rudolph, C.; Rudolph, M. S.; Rühr, F.; Ruiz-Martinez, A.; Rurikova, Z.; Rusakovich, N. A.; Ruschke, A.; Russell, H. L.; Rutherfoord, J. P.; Ruthmann, N.; Ryabov, Y. F.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Saavedra, A. F.; Sabato, G.; Sacerdoti, S.; Saddique, A.; Sadrozinski, H. F.-W.; Sadykov, R.; Safai Tehrani, F.; Saha, P.; Sahinsoy, M.; Saimpert, M.; Saito, T.; Sakamoto, H.; Sakurai, Y.; Salamanna, G.; Salamon, A.; Salazar Loyola, J. E.; Saleem, M.; Salek, D.; Sales De Bruin, P. H.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sammel, D.; Sampsonidis, D.; Sanchez, A.; Sánchez, J.; Sanchez Martinez, V.; Sandaker, H.; Sandbach, R. L.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, C.; Sandstroem, R.; Sankey, D. P. C.; Sannino, M.; Sansoni, A.; Santoni, C.; Santonico, R.; Santos, H.; Santoyo Castillo, I.; Sapp, K.; Sapronov, A.; Saraiva, J. G.; Sarrazin, B.; Sasaki, O.; Sasaki, Y.; Sato, K.; Sauvage, G.; Sauvan, E.; Savage, G.; Savard, P.; Sawyer, C.; Sawyer, L.; Saxon, J.; Sbarra, C.; Sbrizzi, A.; Scanlon, T.; Scannicchio, D. A.; Scarcella, M.; Scarfone, V.; Schaarschmidt, J.; Schacht, P.; Schaefer, D.; Schaefer, R.; Schaeffer, J.; Schaepe, S.; Schaetzel, S.; Schäfer, U.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Schernau, M.; Schiavi, C.; Schillo, C.; Schioppa, M.; Schlenker, S.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitt, S.; Schneider, B.; Schnellbach, Y. J.; Schnoor, U.; Schoeffel, L.; Schoening, A.; Schoenrock, B. D.; Schopf, E.; Schorlemmer, A. L. S.; Schott, M.; Schouten, D.; Schovancova, J.; Schramm, S.; Schreyer, M.; Schuh, N.; Schultens, M. J.; Schultz-Coulon, H.-C.; Schulz, H.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwarz, T. A.; Schwegler, Ph.; Schweiger, H.; Schwemling, Ph.; Schwienhorst, R.; Schwindling, J.; Schwindt, T.; Sciacca, F. G.; Scifo, E.; Sciolla, G.; Scuri, F.; Scutti, F.; Searcy, J.; Sedov, G.; Sedykh, E.; Seema, P.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Sekhon, K.; Sekula, S. J.; Seliverstov, D. M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Serkin, L.; Serre, T.; Sessa, M.; Seuster, R.; Severini, H.; Sfiligoj, T.; Sforza, F.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shang, R.; Shank, J. T.; Shapiro, M.; Shatalov, P. B.; Shaw, K.; Shaw, S. M.; Shcherbakova, A.; Shehu, C. Y.; Sherwood, P.; Shi, L.; Shimizu, S.; Shimmin, C. O.; Shimojima, M.; Shiyakova, M.; Shmeleva, A.; Shoaleh Saadi, D.; Shochet, M. J.; Shojaii, S.; Shrestha, S.; Shulga, E.; Shupe, M. A.; Shushkevich, S.; Sicho, P.; Sidebo, P. E.; Sidiropoulou, O.; Sidorov, D.; Sidoti, A.; Siegert, F.; Sijacki, Dj.; Silva, J.; Silver, Y.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simioni, E.; Simmons, B.; Simon, D.; Sinervo, P.; Sinev, N. B.; Sioli, M.; Siragusa, G.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinner, M. B.; Skottowe, H. P.; Skubic, P.; Slater, M.; Slavicek, T.; Slawinska, M.; Sliwa, K.; Smakhtin, V.; Smart, B. H.; Smestad, L.; Smirnov, S. Yu.; Smirnov, Y.; Smirnova, L. N.; Smirnova, O.; Smith, M. N. K.; Smith, R. W.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snidero, G.; Snyder, S.; Sobie, R.; Socher, F.; Soffer, A.; Soh, D. A.; Sokhrannyi, G.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E. Yu.; Soldevila, U.; Solodkov, A. A.; Soloshenko, A.; Solovyanov, O. V.; Solovyev, V.; Sommer, P.; Song, H. Y.; Soni, N.; Sood, A.; Sopczak, A.; Sopko, B.; Sopko, V.; Sorin, V.; Sosa, D.; Sosebee, M.; Sotiropoulou, C. L.; Soualah, R.; Soukharev, A. M.; South, D.; Sowden, B. C.; Spagnolo, S.; Spalla, M.; Spangenberg, M.; Spanò, F.; Spearman, W. R.; Sperlich, D.; Spettel, F.; Spighi, R.; Spigo, G.; Spiller, L. A.; Spousta, M.; St. Denis, R. D.; Stabile, A.; Staerz, S.; Stahlman, J.; Stamen, R.; Stamm, S.; Stanecka, E.; Stanescu, C.; Stanescu-Bellu, M.; Stanitzki, M. M.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staszewski, R.; Steinberg, P.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stewart, G. A.; Stillings, J. A.; Stockton, M. C.; Stoebe, M.; Stoicea, G.; Stolte, P.; Stonjek, S.; Stradling, A. R.; Straessner, A.; Stramaglia, M. E.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Stroynowski, R.; Strubig, A.; Stucci, S. A.; Stugu, B.; Styles, N. A.; Su, D.; Su, J.; Subramaniam, R.; Succurro, A.; Sugaya, Y.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, S.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Susinno, G.; Sutton, M. R.; Suzuki, S.; Svatos, M.; Swiatlowski, M.; Sykora, I.; Sykora, T.; Ta, D.; Taccini, C.; Tackmann, K.; Taenzer, J.; Taffard, A.; Tafirout, R.; Taiblum, N.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Takubo, Y.; Talby, M.; Talyshev, A. A.; Tam, J. Y. C.; Tan, K. G.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tannenwald, B. B.; Tannoury, N.; Tapia Araya, S.; Tapprogge, S.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tashiro, T.; Tassi, E.; Tavares Delgado, A.; Tayalati, Y.; Taylor, F. E.; Taylor, G. N.; Taylor, P. T. E.; Taylor, W.; Teischinger, F. A.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Temple, D.; Ten Kate, H.; Teng, P. K.; Teoh, J. J.; Tepel, F.; Terada, S.; Terashi, K.; Terron, J.; Terzo, S.; Testa, M.; Teuscher, R. J.; Theveneaux-Pelzer, T.; Thomas, J. P.; Thomas-Wilsker, J.; Thompson, E. N.; Thompson, P. D.; Thompson, R. J.; Thompson, A. S.; Thomsen, L. A.; Thomson, E.; Thomson, M.; Thun, R. P.; Tibbetts, M. J.; Ticse Torres, R. E.; Tikhomirov, V. O.; Tikhonov, Yu. A.; Timoshenko, S.; Tiouchichine, E.; Tipton, P.; Tisserant, S.; Todome, K.; Todorov, T.; Todorova-Nova, S.; Tojo, J.; Tokár, S.; Tokushuku, K.; Tollefson, K.; Tolley, E.; Tomlinson, L.; Tomoto, M.; Tompkins, L.; Toms, K.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Tripiana, M. F.; Trischuk, W.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trovatelli, M.; Truong, L.; Trzebinski, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C.-L.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsirintanis, N.; Tsiskaridze, S.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsuno, S.; Tsybychev, D.; Tudorache, A.; Tudorache, V.; Tuna, A. N.; Tupputi, S. A.; Turchikhin, S.; Turecek, D.; Turra, R.; Turvey, A. J.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Ueda, I.; Ueno, R.; Ughetto, M.; Ugland, M.; Ukegawa, F.; Unal, G.; Undrus, A.; Unel, G.; Ungaro, F. C.; Unno, Y.; Unverdorben, C.; Urban, J.; Urquijo, P.; Urrejola, P.; Usai, G.; Usanova, A.; Vacavant, L.; Vacek, V.; Vachon, B.; Valderanis, C.; Valencic, N.; Valentinetti, S.; Valero, A.; Valery, L.; Valkar, S.; Vallecorsa, S.; Valls Ferrer, J. A.; Van Den Wollenberg, W.; Van Der Deijl, P. C.; van der Geer, R.; van der Graaf, H.; van Eldik, N.; van Gemmeren, P.; Van Nieuwkoop, J.; van Vulpen, I.; van Woerden, M. C.; Vanadia, M.; Vandelli, W.; Vanguri, R.; Vaniachine, A.; Vannucci, F.; Vardanyan, G.; Vari, R.; Varnes, E. W.; Varol, T.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vazeille, F.; Vazquez Schroeder, T.; Veatch, J.; Veloce, L. M.; Veloso, F.; Velz, T.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Venturini, A.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Viazlo, O.; Vichou, I.; Vickey, T.; Vickey Boeriu, O. E.; Viehhauser, G. H. A.; Viel, S.; Vigne, R.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinogradov, V. B.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vladoiu, D.; Vlasak, M.; Vogel, M.; Vokac, P.; Volpi, G.; Volpi, M.; von der Schmitt, H.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobev, K.; Vos, M.; Voss, R.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vuillermet, R.; Vukotic, I.; Vykydal, Z.; Wagner, P.; Wagner, W.; Wahlberg, H.; Wahrmund, S.; Wakabayashi, J.; Walder, J.; Walker, R.; Walkowiak, W.; Wang, C.; Wang, F.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, K.; Wang, R.; Wang, S. M.; Wang, T.; Wang, T.; Wang, X.; Wanotayaroj, C.; Warburton, A.; Ward, C. P.; Wardrope, D. R.; Washbrook, A.; Wasicki, C.; Watkins, P. M.; Watson, A. T.; Watson, I. J.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, B. M.; Webb, S.; Weber, M. S.; Weber, S. W.; Webster, J. S.; Weidberg, A. R.; Weinert, B.; Weingarten, J.; Weiser, C.; Weits, H.; Wells, P. S.; Wenaus, T.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Wessels, M.; Wetter, J.; Whalen, K.; Wharton, A. M.; White, A.; White, M. J.; White, R.; White, S.; Whiteson, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik-Fuchs, L. A. M.; Wildauer, A.; Wilkens, H. G.; Williams, H. H.; Williams, S.; Willis, C.; Willocq, S.; Wilson, A.; Wilson, J. A.; Wingerter-Seez, I.; Winklmeier, F.; Winter, B. T.; Wittgen, M.; Wittkowski, J.; Wollstadt, S. J.; Wolter, M. W.; Wolters, H.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wozniak, K. W.; Wu, M.; Wu, M.; Wu, S. L.; Wu, X.; Wu, Y.; Wyatt, T. R.; Wynne, B. M.; Xella, S.; Xu, D.; Xu, L.; Yabsley, B.; Yacoob, S.; Yakabe, R.; Yamada, M.; Yamaguchi, D.; Yamaguchi, Y.; Yamamoto, A.; Yamamoto, S.; Yamanaka, T.; Yamauchi, K.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, H.; Yang, Y.; Yao, W.-M.; Yap, Y. C.; Yasu, Y.; Yatsenko, E.; Yau Wong, K. H.; Ye, J.; Ye, S.; Yeletskikh, I.; Yen, A. L.; Yildirim, E.; Yorita, K.; Yoshida, R.; Yoshihara, K.; Young, C.; Young, C. J. S.; Youssef, S.; Yu, D. R.; Yu, J.; Yu, J. M.; Yu, J.; Yuan, L.; Yuen, S. P. Y.; Yurkewicz, A.; Yusuff, I.; Zabinski, B.; Zaidan, R.; Zaitsev, A. M.; Zalieckas, J.; Zaman, A.; Zambito, S.; Zanello, L.; Zanzi, D.; Zeitnitz, C.; Zeman, M.; Zemla, A.; Zeng, Q.; Zengel, K.; Zenin, O.; Ženiš, T.; Zerwas, D.; Zhang, D.; Zhang, F.; Zhang, G.; Zhang, H.; Zhang, J.; Zhang, L.; Zhang, R.; Zhang, X.; Zhang, Z.; Zhao, X.; Zhao, Y.; Zhao, Z.; Zhemchugov, A.; Zhong, J.; Zhou, B.; Zhou, C.; Zhou, L.; Zhou, L.; Zhou, M.; Zhou, N.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhukov, K.; Zibell, A.; Zieminska, D.; Zimine, N. I.; Zimmermann, C.; Zimmermann, S.; Zinonos, Z.; Zinser, M.; Ziolkowski, M.; Živković, L.; Zobernig, G.; Zoccoli, A.; zur Nedden, M.; Zurzolo, G.; Zwalinski, L.

    2015-10-01

    A summary of the constraints from the ATLAS experiment on R-parity-conserving supersymmetry is presented. Results from 22 separate ATLAS searches are considered, each based on analysis of up to 20.3 fb-1 of proton-proton collision data at centre-of-mass energies of √{s}=7 and 8 TeV at the Large Hadron Collider. The results are interpreted in the context of the 19-parameter phenomenological minimal supersymmetric standard model, in which the lightest supersymmetric particle is a neutralino, taking into account constraints from previous precision electroweak and flavour measurements as well as from dark matter related measurements. The results are presented in terms of constraints on supersymmetric particle masses and are compared to limits from simplified models. The impact of ATLAS searches on parameters such as the dark matter relic density, the couplings of the observed Higgs boson, and the degree of electroweak fine-tuning is also shown. Spectra for surviving supersymmetry model points with low fine-tunings are presented. [Figure not available: see fulltext.

  7. Aesthetic Emotions and Aesthetic People: Openness Predicts Sensitivity to Novelty in the Experiences of Interest and Pleasure

    PubMed Central

    Fayn, Kirill; MacCann, Carolyn; Tiliopoulos, Niko; Silvia, Paul J.

    2015-01-01

    There is a stable relationship between the Openness/Intellect domain of personality and aesthetic engagement. However, neither of these are simple constructs and while the relationship exists, process based evidence explaining the relationship is still lacking. This research sought to clarify the relationship by evaluating the influence of the Openness and Intellect aspects on several different aesthetic emotions. Two studies looked at the between- and within-person differences in arousal and the emotions of interest, pleasure and confusion in response to visual art. The results suggest that Openness, as opposed to Intellect, was predictive of greater arousal, interest and pleasure, while both aspects explained less confusion. Differences in Openness were associated with within-person emotion appraisal contingencies, particularly greater novelty-interest and novelty-pleasure relationships. Those higher in Openness were particularly influenced by novelty in artworks. For pleasure this relationship suggested a different qualitative structure of appraisals. The appraisal of novelty is part of the experience of pleasure for those high in Openness, but not those low in Openness. This research supports the utility of studying Openness and Intellect as separate aspects of the broad domain and clarifies the relationship between Openness and aesthetic states in terms of within-person appraisal processes. PMID:26696940

  8. Detection of Salicylic Acid in Willow Bark: An Addition to a Classic Series of Experiments in the Introductory Organic Chemistry Laboratory

    ERIC Educational Resources Information Center

    Clay, Matthew D.; McLeod, Eric J.

    2012-01-01

    Salicylic acid and its derivative, acetylsalicylic acid, are often encountered in introductory organic chemistry experiments, and mention is often made that salicylic acid was originally isolated from the bark of the willow tree. This biological connection, however, is typically not further pursued, leaving students with an impression that biology…

  9. Generation, Isolation, and Characterization of a Stable Enol from Grignard Addition to a Bis-Ester: A Microscale Experiment for the Undergraduate Organic Chemistry Laboratory

    ERIC Educational Resources Information Center

    Nicaise, Olivier J. C.; Ostrom, Kyle F.; Dalke, Brent J.

    2005-01-01

    An experiment is described that introduces students to the concept of temperature-dependent stability of the tetrahedral intermediate in an acyl-transfer reaction. The process involves the determination of the structure of an alpha-ketoester and its corresponding remarkably stable enol ester to suggest a mechanism for the formation of the products.

  10. Stress and coping in interracial contexts: The influence of race-based rejection sensitivity and cross-group friendship in daily experiences of health

    PubMed Central

    Page-Gould, Elizabeth; Mendoza-Denton, Rodolfo; Mendes, Wendy Berry

    2014-01-01

    We examined the interplay of psychosocial risk and protective factors in daily experiences of health. In Study 1, the tendency to anxiously expect rejection from racial outgroup members, termed race-based rejection sensitivity (RS-race), was cross-sectionally related to greater stress-symptoms among Black adults who reported fewer cross-race friends but not among participants who had more cross-race friends. In Study 2, we experimentally manipulated the development of a same- versus cross-race friendship among Latino/a-White dyads prior to collecting daily experiences of stress-symptoms using a diary methodology. While RS-race predicted more psychosomatic symptoms in the same-race friendship condition, RS-race was unrelated to symptomatology among participants who made a cross-race friend. These findings suggest that experiences of intergroup stress can spill over into everyday life in the absence of positive contact, but cross-race friendships may be a resource that mitigates the expression of interracial stress. PMID:25045176

  11. Micron-Size Zero-Valent Iron Emplacement in Porous Media Using Polymer Additives: Column and Flow Cell Ex-periments

    SciTech Connect

    Oostrom, Mart; Wietsma, Thomas W.; Covert, Matthew A.; Vermeul, Vince R.

    2006-03-20

    At the Hanford Site, an extensive In Situ Redox Manipulation (ISRM) permeable reactive barrier was installed to prevent chromate from reaching the Columbia River. However, chromium has been detected in several wells, indicating a premature loss of the reductive capacity in the aquifer. Laboratory experiments have been conducted to investigate whether barrier reductive capacity can be enhanced by adding micron-scale zero-valent iron to the high-permeability zones within the aquifer using shear-thinning fluids containing polymers. Porous media were packed in a wedge-shaped flow cell to create either a heterogeneous layered system with a high-permeability zone between two low-permeability zones or a high-permeability channel sur-rounded by low-permeability materials. The injection flow rate, polymer type, polymer concentration, and injected pore volumes were determined based on preliminary short- and long-column experiments. The flow cell experiments indicated that iron concentration enhancements of at least 0.6% (w/w) could be obtained using moderate flow rates and injection of 30 pore volumes. The 0.6% amended Fe0 concentration would provide approximately 20 times the average reductive capacity that is provided by the dithionite-reduced iron in the ISRM barrier. Calculations show that a 1-m-long Fe0 amended zone with an average concentration of 0.6% w/w iron subject to a groundwater velocity of 1 m/day will have an estimated longevity of 7.2 years.

  12. Qualitative impact of salinity, UV radiation and turbulence on leaching of organic plastic additives from four common plastics - A lab experiment.

    PubMed

    Suhrhoff, Tim Jesper; Scholz-Böttcher, Barbara M

    2016-01-15

    Four common consumer plastic samples (polyethylene, polystyrene, polyethylene terephthalate, polyvinylchloride) were studied to investigate the impact of physical parameters such as turbulence, salinity and UV irradiance on leaching behavior of selected plastic components. Polymers were exposed to two different salinities (i.e. 0 and 35 g/kg), UV radiation and turbulence. Additives (e.g. bisphenol A, phthalates, citrates, and Irgafos® 168 phosphate) and oligomers were detected in initial plastics and aqueous extracts. Identification and quantification was performed by GC-FID/MS. Bisphenol A and citrate based additives are leached easier compared to phthalates. The print highly contributed to the chemical burden of the analyzed polyethylene bag. The study underlines a positive relationship between turbulence and magnitude of leaching. Salinity had a minor impact that differs for each analyte. Global annual release of additives from assessed plastics into marine environments is estimated to be between 35 and 917 tons, of which most are derived from plasticized polyvinylchloride. PMID:26696590

  13. A measurement system analysis with design of experiments: Investigation of the adhesion performance of a pressure sensitive adhesive with the probe tack test.

    PubMed

    Michaelis, Marc; Leopold, Claudia S

    2015-12-30

    The tack of a pressure sensitive adhesive (PSA) is not an inherent material property and strongly depends on the measurement conditions. Following the concept of a measurement system analysis (MSA), influencing factors of the probe tack test were investigated by a design of experiments (DoE) approach. A response surface design with 38 runs was built to evaluate the influence of detachment speed, dwell time, contact force, adhesive film thickness and API content on tack, determined as the maximum of the stress strain curve (σmax). It could be shown that all investigated factors have a significant effect on the response and that the DoE approach allowed to detect two-factorial interactions between the dwell time, the contact force, the adhesive film thickness and the API content. Surprisingly, it was found that tack increases with decreasing and not with increasing adhesive film thickness. PMID:26428630

  14. The sensitivity of tropical leaf litter decomposition to temperature: results from a large-scale leaf translocation experiment along an elevation gradient in Peruvian forests.

    PubMed

    Salinas, N; Malhi, Y; Meir, P; Silman, M; Roman Cuesta, R; Huaman, J; Salinas, D; Huaman, V; Gibaja, A; Mamani, M; Farfan, F

    2011-03-01

    • We present the results from a litter translocation experiment along a 2800-m elevation gradient in Peruvian tropical forests. The understanding of the environmental factors controlling litter decomposition is important in the description of the carbon and nutrient cycles of tropical ecosystems, and in predicting their response to long-term increases in temperature. • Samples of litter from 15 species were transplanted across all five sites in the study, and decomposition was tracked over 448 d. • Species' type had a large influence on the decomposition rate (k), most probably through its influence on leaf quality and morphology. When samples were pooled across species and elevations, soil temperature explained 95% of the variation in the decomposition rate, but no direct relationship was observed with either soil moisture or rainfall. The sensitivity of the decay rate to temperature (κ(T)) varied seven-fold across species, between 0.024 and 0.169 °C⁻¹, with a mean value of 0.118 ± 0.009 °C⁻¹ (SE). This is equivalent to a temperature sensitivity parameter (Q₁₀) for litter decay of 3.06 ± 0.28, higher than that frequently assumed for heterotrophic processes. • Our results suggest that the warming of approx. 0.9 °C experienced in the region in recent decades may have increased decomposition and nutrient mineralization rates by c. 10%. PMID:21077887

  15. Variational assimilation of VAS data into a mesoscale model Assimilation method and sensitivity experiments. [Visible Infrared Spin-Scan Radiometer Atmospheric Sounder

    NASA Technical Reports Server (NTRS)

    Cram, J. M.; Kaplan, M. L.

    1985-01-01

    The assimilation of temperature and moisture gradient information from the Visible IR Spin-Scan Radiometer's Atmospheric Sounder (VAS) into a mesoscale model is presently undertaken by means of a variational method and followed by tests of the sensitivity of both diabatic and adiabatic versions of the model to VAS data assimilations for the case of July 20-21, 1981. The synoptic scale effects of the assimilation of VAS data are noted to be negligible; the greatest impact was instead on mesoscale forecasts of convective instability patterns. The additional assimilation of relative humidity gradients did not significantly change the patterns of the forecast instabilities. The greatest improvements from assimilation resulted from the resolution of the strong mesoscale temperature gradients by the asynoptic VAS data.

  16. Use of 13C and 15N mass spectrometry to study the decomposition of Calamagrostis epigeios in soil column experiments with and without ash additions.

    PubMed

    Ludwig, B; Heil, B; Flessa, H; Beese, F

    2000-01-01

    The dynamics of C and N in terrestrial ecosystems are not completely understood and the use of stable isotopes may be useful to gain further insight in the pathways of CO2 emissions and leaching of dissolved organic carbon (DOC) and nitrogen (DON) during decomposition of litter. Objectives were (i) to study the decomposition dynamics of Calamagrostis epigeios, a common grass species in forests, using 13C-depleted and 15N-enriched plants and (ii) to quantify the effect wood ash addition on the decomposition and leaching of DOC and DON. Decomposition was studied for 128 days under aerobic conditions at 8 degrees C and moisture close to field capacity in a spodic dystric Cambisol with mor-moder layer. Variants included control plots and additions of (i) Calamagrostis litter and (ii) Calamagrostis litter plus 4 kg ash m-2. (i) Decomposition of Calamagrostis resulted in a CO2 production of 76.2 g CO2-C m-2 (10% of added C) after 128 days and cumulative DOC production was 14.0 g C m-2 out of which 0.9 g C m-2 was Calamagrostis-derived (0.1% of added C). The specific CO2 formation and specific DOC production from Calamagrostis were 6 times higher (CO2) and 4 times smaller (DOC) than those from the organic layer. The amount of Calamagrostis-derived total N (NH4+, NO3-, DON) leached was 0.7 g N m-2 (4.8% of added N). Cumulative DON production was 0.8 g N m-2 which was slightly higher than for the control. During soil passage, much of the DOC and DON was removed due to sorption or decomposition. DOC and DON releases from the mineral soil (17 cm depth) were 6.3 g C m-2 and 0.5 g N m-2. (ii) Addition of ash resulted in a complete fixing of CO2 for 40 days due to carbonatisation. Afterwards, the CO2 production rates were similar to the variant without ash addition. Production of DOC (98.6 g C m-2) and DON (2.5 g N m-2) was marked, mainly owing to humus decay. However, Calamagrostis-derived DOC and Calamagrostis-derived total N were only 3.9 g C m-2 (0.5% of added C) and 0.5 g N

  17. Seismic Absorption and Modulus Measurements in Porous Rocks in Lab and Field: Physical, Chemical, and Biological Effects of Fluids (Detecting a Biosurfactant Additive in a Field Irrigation Experiment)

    SciTech Connect

    Spetzler, Hartmut

    2006-05-01

    We have been exploring a new technology that is based on using low-frequency seismic attenuation data to monitor changes in fluid saturation conditions in two-fluid phase porous materials. The seismic attenuation mechanism is related to the loss of energy due to the hysteresis of resistance to meniscus movement (changes in surface tension, wettability) when a pore containing two fluids is stressed at very low frequencies (< 10 Hz). This technology has potential applications to monitoring changes in (1) leakage at buried waste sites, (2) contaminant remediation, and (3) flooding during enhanced petroleum recovery. We have concluded a three year field study at the Maricopa Agricultural Center site of the University of Arizona. Three sets of instruments were installed along an East-West line perpendicular to the 50m by 50m inigation site. Each set of instruments consisted of one three component seismometer and one tiltmeter. Microseisms and solid Earth-tides served as strain sources. The former have a power peak at a period of about 6 seconds and the tides have about two cycles per day. Installation of instruments commenced in late summer of 2002. The instruments operated nearly continuously until April 2005. During the fall of 2003 the site was irrigated with water and one year later with water containing 150 ppm of a biosurfactant additive. This biodegradable additive served to mimic a class of contaminants that change the surface tension of the inigation fluid. Tilt data clearly show tidal tilts superimposed on local tilts due to agricultural irrigation and field work. When the observed signals were correlated with site specific theoretical tilt signals we saw no anomalies for the water irrigation in 2003, but large anomalies on two stations for the surfactant irrigation in 2004. Occasional failures of seismometers as well as data acquisition systems contributed to less than continuous coverage. These data are noisier than the tilt data, but do also show possible

  18. Can additive measures add to an intersectional understanding? Experiences of gay and ethnic discrimination among HIV-positive Latino gay men

    PubMed Central

    Reisen, Carol A.; Brooks, Kelly D.; Zea, Maria Cecilia; Poppen, Paul J.; Bianchi, Fernanda T.

    2013-01-01

    The current study investigated a methodological question of whether traditional, additive, quantitative data can be used to address intersectional issues, and illustrated such an approach with a sample of 301 HIV-positive, Latino gay men in the U.S. Participants were surveyed using A-CASI. Hierarchical logistic set regression investigated the role of sets of variables reflecting demographic characteristics, gender nonconformity, and gay and ethnic discrimination in relation to depression and gay collective identity. Results showed the discrimination set was related to depression and to gay collective identity, as was gender nonconformity. Follow-up logistic regression showed that both types of discrimination were associated with greater depression, but gender nonconformity was not. Gay discrimination and gender nonconformity were positively associated with gay collective identity, whereas ethnic discrimination was negatively associated. Results are discussed in terms of the use of traditional quantitative data as a potential means of understanding intersectional issues, as well as of contributing to knowledge about individuals facing multiple structural inequalities. PMID:23647331

  19. Anaplastic Thyroid Cancer: The Addition of Systemic Chemotherapy to Radiotherapy Led to an Observed Improvement in Survival—A Single Centre Experience and Review of the Literature

    PubMed Central

    Lowe, Natalie M.; Loughran, Sean; Slevin, Nicholas J.; Yap, Beng K.

    2014-01-01

    Introduction. Anaplastic thyroid carcinoma (ATC) is rare yet accounts for up to 50% of all thyroid cancer deaths. This study reviews outcomes of patients with confirmed ATC referred to a tertiary oncology centre plus reviews the literature to explore how poor outcomes may be improved. Materials and Methods. The management and outcomes of 20 patients with ATC were reviewed. Results. Median age at diagnosis was 69.5 years. 19 patients died due to ATC, 40% of whom died from asphyxiation. Median survival for all cases was 59 days. Patients who had previous surgery prior to other treatment modalities had a longer median survival overall compared to those who had not had previous surgery (142 days compared to 59 days) and produced the one long-term survivor. Chemotherapy followed by radiotherapy (without previous surgery) was associated with longer median survival (220 days). Palliative radiotherapy alone did not decrease the rate of death by asphyxiation when compared to other single modality treatments. Conclusion. Multimodality treatment including surgery when feasible remains the best strategy to improve survival and prevent death from asphyxiation in the management of ATC. The addition of chemotherapy to our institutional protocol led to improved survival but prognosis remains very poor. PMID:25184150

  20. Coherency Sensitive Hashing.

    PubMed

    Korman, Simon; Avidan, Shai

    2016-06-01

    Coherency Sensitive Hashing (CSH) extends Locality Sensitivity Hashing (LSH) and PatchMatch to quickly find matching patches between two images. LSH relies on hashing, which maps similar patches to the same bin, in order to find matching patches. PatchMatch, on the other hand, relies on the observation that images are coherent, to propagate good matches to their neighbors in the image plane, using random patch assignment to seed the initial matching. CSH relies on hashing to seed the initial patch matching and on image coherence to propagate good matches. In addition, hashing lets it propagate information between patches with similar appearance (i.e., map to the same bin). This way, information is propagated much faster because it can use similarity in appearance space or neighborhood in the image plane. As a result, CSH is at least three to four times faster than PatchMatch and more accurate, especially in textured regions, where reconstruction artifacts are most noticeable to the human eye. We verified CSH on a new, large scale, data set of 133 image pairs and experimented on several extensions, including: k nearest neighbor search, the addition of rotation and matching three dimensional patches in videos. PMID:26372204

  1. A Novel High-Resolution and Sensitivity-Enhanced Three-Dimensional Solid-State NMR Experiment Under Ultrafast Magic Angle Spinning Conditions.

    PubMed

    Zhang, Rongchun; Pandey, Manoj Kumar; Nishiyama, Yusuke; Ramamoorthy, Ayyalusamy

    2015-01-01

    Although magic angle spinning (MAS) solid-state NMR is a powerful technique to obtain atomic-resolution insights into the structure and dynamics of a variety of chemical and biological solids, poor sensitivity has severely limited its applications. In this study, we demonstrate an approach that suitably combines proton-detection, ultrafast-MAS and multiple frequency dimensions to overcome this limitation. With the utilization of proton-proton dipolar recoupling and double quantum (DQ) coherence excitation/reconversion radio-frequency pulses, very high-resolution proton-based 3D NMR spectra that correlate single-quantum (SQ), DQ and SQ coherences of biological solids have been obtained successfully for the first time. The proposed technique requires a very small amount of sample and does not need multiple radio-frequency (RF) channels. It also reveals information about the proximity between a spin and a certain other dipolar-coupled pair of spins in addition to regular SQ/DQ and SQ/SQ correlations. Although (1)H spectral resolution is still limited for densely proton-coupled systems, the 3D technique is valuable to study dilute proton systems, such as zeolites, small molecules, or deuterated samples. We also believe that this new methodology will aid in the design of a plethora of multidimensional NMR techniques and enable high-throughput investigation of an exciting class of solids at atomic-level resolution. PMID:26138791

  2. Synthesis of highly functionalized oligobenzamide proteomimetic foldamers by late stage introduction of sensitive groups† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ob00078a Click here for additional data file.

    PubMed Central

    Burslem, George M.; Kyle, Hannah F.; Prabhakaran, Panchami; Breeze, Alexander L.; Edwards, Thomas A.; Warriner, Stuart L.; Nelson, Adam

    2016-01-01

    α-Helix proteomimetics represent an emerging class of ligands that can be used to inhibit an array of helix mediated protein–protein interactions. Within this class of inhibitor, aromatic oligobenzamide foldamers have been widely and successfully used. This manuscript describes alternative syntheses of these compounds that can be used to access mimetics that are challenging to synthesize using previously described methodologies, permitting access to compounds functionalized with multiple sensitive side chains and accelerated library assembly through late stage derivatisation. PMID:27005701

  3. Variance-based Sensitivity Analysis of Large-scale Hydrological Model to Prepare an Ensemble-based SWOT-like Data Assimilation Experiments

    NASA Astrophysics Data System (ADS)

    Emery, C. M.; Biancamaria, S.; Boone, A. A.; Ricci, S. M.; Garambois, P. A.; Decharme, B.; Rochoux, M. C.

    2015-12-01

    Land Surface Models (LSM) coupled with River Routing schemes (RRM), are used in Global Climate Models (GCM) to simulate the continental part of the water cycle. They are key component of GCM as they provide boundary conditions to atmospheric and oceanic models. However, at global scale, errors arise mainly from simplified physics, atmospheric forcing, and input parameters. More particularly, those used in RRM, such as river width, depth and friction coefficients, are difficult to calibrate and are mostly derived from geomorphologic relationships, which may not always be realistic. In situ measurements are then used to calibrate these relationships and validate the model, but global in situ data are very sparse. Additionally, due to the lack of existing global river geomorphology database and accurate forcing, models are run at coarse resolution. This is typically the case of the ISBA-TRIP model used in this study.A complementary alternative to in-situ data are satellite observations. In this regard, the Surface Water and Ocean Topography (SWOT) satellite mission, jointly developed by NASA/CNES/CSA/UKSA and scheduled for launch around 2020, should be very valuable to calibrate RRM parameters. It will provide maps of water surface elevation for rivers wider than 100 meters over continental surfaces in between 78°S and 78°N and also direct observation of river geomorphological parameters such as width ans slope.Yet, before assimilating such kind of data, it is needed to analyze RRM temporal sensitivity to time-constant parameters. This study presents such analysis over large river basins for the TRIP RRM. Model output uncertainty, represented by unconditional variance, is decomposed into ordered contribution from each parameter. Doing a time-dependent analysis allows then to identify to which parameters modeled water level and discharge are the most sensitive along a hydrological year. The results show that local parameters directly impact water levels, while

  4. Multi-Layer Arctic Mixed-Phase Clouds Simulated by a Cloud-Resolving Model: Comparison with ARM Observations and Sensitivity Experiments

    NASA Technical Reports Server (NTRS)

    Luo, Yali; Xu, Kuan-Man; Morrison, Hugh; McFarquhar, Greg M.; Wang, Zhien; Zhang, Gong

    2007-01-01

    A cloud-resolving model (CRM) is used to simulate the multiple-layer mixed-phase stratiform (MPS) clouds that occurred during a three-and-a-half day subperiod of the Department of Energy-Atmospheric Radiation Measurement Program s Mixed-Phase Arctic Cloud Experiment (M-PACE). The CRM is implemented with an advanced two-moment microphysics scheme, a state-of-the-art radiative transfer scheme, and a complicated third-order turbulence closure. Concurrent meteorological, aerosol, and ice nucleus measurements are used to initialize the CRM. The CRM is prescribed by time-varying large-scale advective tendencies of temperature and moisture and surface turbulent fluxes of sensible and latent heat. The CRM reproduces the occurrences of the single- and double-layer MPS clouds as revealed by the M-PACE observations. However, the simulated first cloud layer is lower and the second cloud layer thicker compared to observations. The magnitude of the simulated liquid water path agrees with that observed, but its temporal variation is more pronounced than that observed. As in an earlier study of single-layer cloud, the CRM also captures the major characteristics in the vertical distributions and temporal variations of liquid water content (LWC), total ice water content (IWC), droplet number concentration and ice crystal number concentration (nis) as suggested by the aircraft observations. However, the simulated mean values differ significantly from the observed. The magnitude of nis is especially underestimated by one order of magnitude. Sensitivity experiments suggest that the lower cloud layer is closely related to the surface fluxes of sensible and latent heat; the upper cloud layer is probably initialized by the large-scale advective cooling/moistening and maintained through the strong longwave (LW) radiative cooling near the cloud top which enhances the dynamical circulation; artificially turning off all ice-phase microphysical processes results in an increase in LWP by a

  5. Mentoring Emotionally Sensitive Individuals.

    ERIC Educational Resources Information Center

    Shaughnessy, Michael F.; Self, Elizabeth

    Mentoring individuals who are gifted, talented, and creative, but somewhat emotionally sensitive is a challenging and provocative arena. Several reasons individuals experience heightened sensitivity include: lack of nurturing, abuse, alcoholism in the family, low self-esteem, unrealistic parental expectations, and parental pressure to achieve.…

  6. Efficient eco-friendly inverted quantum dot sensitized solar cells† †Electronic supplementary information (ESI) available: TEM images of QDs, XPS spectra, UV-vis and PL spectra of the sensitized electrodes, details about photophysical characterization and IPCE spectra interpretation. See DOI: 10.1039/c5ta06769c Click here for additional data file.

    PubMed Central

    Park, Jinhyung; Sajjad, Muhammad T.; Jouneau, Pierre-Henri; Ruseckas, Arvydas; Faure-Vincent, Jérôme; Reiss, Peter

    2016-01-01

    Recent progress in quantum dot (QD) sensitized solar cells has demonstrated the possibility of low-cost and efficient photovoltaics. However, the standard device structure based on n-type materials often suffers from slow hole injection rate, which may lead to unbalanced charge transport. We have fabricated efficient p-type (inverted) QD sensitized cells, which combine the advantages of conventional QD cells with p-type dye sensitized configurations. Moreover, p-type QD sensitized cells can be used in highly promising tandem configurations with n-type ones. QDs without toxic Cd and Pb elements and with improved absorption and stability were successfully deposited onto mesoporous NiO electrode showing good coverage and penetration according to morphological analysis. Detailed photophysical charge transfer studies showed that high hole injection rates (108 s–1) observed in such systems are comparable with electron injection in conventional n-type QD assemblies. Inverted solar cells fabricated with various QDs demonstrate excellent power conversion efficiencies of up to 1.25%, which is 4 times higher than the best values for previous inverted QD sensitized cells. Attempts to passivate the surface of the QDs show that traditional methods of reduction of recombination in the QD sensitized cells are not applicable to the inverted architectures. PMID:27478616

  7. Ice sheet sensitivity experiments as part of an assessment of long-term safety for a planned repository for spent nuclear fuel in Sweden

    NASA Astrophysics Data System (ADS)

    Wekerle, Claudia; Colleoni, Florence; Masina, Simona; Näslund, Jens-Ove; Brandefelt, Jenny

    2014-05-01

    An application to build a deep geological repository for spent nuclear fuel in Forsmark in south-central Sweden is currently under consideration by Swedish authorities. As part of the safety assessment, the response of the repository to an extensive glaciation over time scales of several hundred thousand years, in terms of ice thickness, bedrock depression and hydrostatic pressure, has to be evaluated. The most extensive glaciation over Eurasia recorded in geological proxies occurred during the MIS 6, at around 140 kyrs BP (Late Saalian glaciation). At this time, the few existing numerical ice-sheet reconstructions suggest that the Eurasian ice volume reached more than 70 m SLE, which is at least three times larger than during the Last Glacial Maximum (21 kyrs BP). The reconstruction of this ice sheet is complicated by the fact that the timing of the maximum ice volume may not have been coeval with the maximum eastern and southern extent of the Saalian ice sheet. In the present study, the maximum geographical extension of the Late Saalian glaciation serves as an extreme test case to assess the impact of ice thickness over the Forsmark repository site. We use the 3D-thermodynamical ice sheet-ice shelves and ice stream model GRISLI (Ritz et al. 2001) to simulate the Northern Hemisphere ice sheet topography of the Late Saalian glaciation. The model is forced by steady-state climatic fields (surface air temperature and precipitation) computed using the coupled atmosphere-ocean Community Earth System Model (CESM, NCAR) at ~1°x1° resolution, with boundary and forcing conditions representative for the MIS6 glacial maximum. Ice sheet simulations are run on a 20 km regular rectangular grid over the northern high latitudes and allow for floating ice. First, as part of the model validation, we show a numerical reconstruction of the MIS 6 Eurasian ice sheet using standard parameters for lapse rate, PDD coefficients and basal hydrology. Second, sensitivity experiments are

  8. Enhancing aspergiolide A production from a shear-sensitive and easy-foaming marine-derived filamentous fungus Aspergillus glaucus by oxygen carrier addition and impeller combination in a bioreactor.

    PubMed

    Cai, Menghao; Zhou, Xiangshan; Lu, Jian; Fan, Weimin; Niu, Chuanpeng; Zhou, Jiushun; Sun, Xueqian; Kang, Li; Zhang, Yuanxing

    2011-02-01

    Production enhancement of a novel antitumor compound aspergiolide A from shear-sensitive and easy-foaming marine-derived fungus Aspergillus glaucus HB1-19 in a 5-l stirred bioreactor was investigated. Two types of impellers, i.e., six-flat-blade disc turbine impeller (DT) and three-sector-blade pitched blade turbine impeller (PB) were used in this work. In cultures with fermentation medium, the combination of upper PB and lower DT led to the maximum dry biomass (13.8 g/l) and aspergiolide A production (19.3 mg/l). However, two PBs brought the highest aspergiolide A yield coefficient (1.9 mg/g dry biomass) despite it produced the lowest dry biomass (5.3 g/l). By contrast, two DTs and the upper DT and lower PB showed insignificant results. Feeding 0.35% (v/v) n-dodecane in cultures with upper PB and lower DT further improved aspergiolide A production by 31.0%, i.e., 25.3 mg/l, which is also 322% higher than that in the ordinary cultures with two DTs. PMID:21074418

  9. Efficient bifacial dye-sensitized solar cells through disorder by design† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ta10091g Click here for additional data file.

    PubMed Central

    Miranda-Muñoz, José M.; Carretero-Palacios, Sol; Jiménez-Solano, Alberto; Li, Yuelong; Lozano, Gabriel

    2016-01-01

    Herein we realize an optical design that optimizes the performance of bifacial solar cells without modifying any of the usually employed components. In order to do so, dielectric scatterers of controlled size and shape have been successfully integrated in the working electrodes of dye-sensitized solar cells (DSSCs), resulting in bifacial devices of outstanding performance. Power conversion efficiencies (PCEs) as high as 6.7% and 5.4% have been attained under front and rear illumination, respectively, which represent a 25% and a 33% PCE enhancement with respect to an 8 μm-thick standard solar cell electrode using platinum as the catalytic material. The remarkable bifacial character of our approach is demonstrated by the high rear/front efficiency ratio attained, around 80%, which is among the largest reported for this sort of device. The proposed optimized design is based on a Monte Carlo approach in which the multiple scattering of light within the cell is fully accounted for. We identified that the spherical shape of the scatterers is the key parameter controlling the angular distribution of the scattering, the most efficient devices being those in which the inclusions provide a narrow forward-oriented angular distribution of the scattered light. PMID:27019714

  10. In situ sulfur isotopes (δ(34)S and δ(33)S) analyses in sulfides and elemental sulfur using high sensitivity cones combined with the addition of nitrogen by laser ablation MC-ICP-MS.

    PubMed

    Fu, Jiali; Hu, Zhaochu; Zhang, Wen; Yang, Lu; Liu, Yongsheng; Li, Ming; Zong, Keqing; Gao, Shan; Hu, Shenghong

    2016-03-10

    The sulfur isotope is an important geochemical tracer in diverse fields of geosciences. In this study, the effects of three different cone combinations with the addition of N2 on the performance of in situ S isotope analyses were investigated in detail. The signal intensities of S isotopes were improved by a factor of 2.3 and 3.6 using the X skimmer cone combined with the standard sample cone or the Jet sample cone, respectively, compared with the standard arrangement (H skimmer cone combined with the standard sample cone). This signal enhancement is important for the improvement of the precision and accuracy of in situ S isotope analysis at high spatial resolution. Different cone combinations have a significant effect on the mass bias and mass bias stability for S isotopes. Poor precisions of S isotope ratios were obtained using the Jet and X cones combination at their corresponding optimum makeup gas flow when using Ar plasma only. The addition of 4-8 ml min(-1) nitrogen to the central gas flow in laser ablation MC-ICP-MS was found to significantly enlarge the mass bias stability zone at their corresponding optimum makeup gas flow in these three different cone combinations. The polyatomic interferences of OO, SH, OOH were also significantly reduced, and the interference free plateaus of sulfur isotopes became broader and flatter in the nitrogen mode (N2 = 4 ml min(-1)). However, the signal intensity of S was not increased by the addition of nitrogen in this study. The laser fluence and ablation mode had significant effects on sulfur isotope fractionation during the analysis of sulfides and elemental sulfur by laser ablation MC-ICP-MS. The matrix effect among different sulfides and elemental sulfur was observed, but could be significantly reduced by line scan ablation in preference to single spot ablation under the optimized fluence. It is recommended that the d90 values of the particles in pressed powder pellets for accurate and precise S isotope analysis

  11. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  12. Simulations of the HDO and H2O-18 atmospheric cycles using the NASA GISS general circulation model - Sensitivity experiments for present-day conditions

    NASA Technical Reports Server (NTRS)

    Jouzel, Jean; Koster, R. D.; Suozzo, R. J.; Russell, G. L.; White, J. W. C.

    1991-01-01

    Incorporating the full geochemical cycles of stable water isotopes (HDO and H2O-18) into an atmospheric general circulation model (GCM) allows an improved understanding of global delta-D and delta-O-18 distributions and might even allow an analysis of the GCM's hydrological cycle. A detailed sensitivity analysis using the NASA/Goddard Institute for Space Studies (GISS) model II GCM is presented that examines the nature of isotope modeling. The tests indicate that delta-D and delta-O-18 values in nonpolar regions are not strongly sensitive to details in the model precipitation parameterizations. This result, while implying that isotope modeling has limited potential use in the calibration of GCM convection schemes, also suggests that certain necessarily arbitrary aspects of these schemes are adequate for many isotope studies. Deuterium excess, a second-order variable, does show some sensitivity to precipitation parameterization and thus may be more useful for GCM calibration.

  13. Sensitivity of subalpine tree seedlings and alpine plants to natural and manipulated climate variation: Initial results from an Alpine Treeline Warming Experiment (Invited)

    NASA Astrophysics Data System (ADS)

    Kueppers, L. M.

    2010-12-01

    Niche models and paleoecological studies indicate that future climate change will alter the geographic distributions of plant species. Changes in temperature, snowmelt timing, or moisture conditions at one edge of a species’ range may have different consequences for recruitment, carbon exchange, phenology, and survival than changes at another edge. Similarly, local genetic adaptation may constrain species and community responses to climate change. We have established a new experiment to investigate potential shifts in the distribution of subalpine tree species, and the alpine species they might replace. We are asking how tree species recruitment and alpine species growth and reproduction vary within their current ranges, and in response to temperature and soil moisture manipulations. We are also examining whether genetic provenance and ecosystem processes constrain tree seedling and alpine herb responses. Our Alpine Treeline Warming Experiment is located across three sites at Niwot Ridge, CO, ranging from near the lower limit of subalpine forest to alpine tundra. We use infrared heaters to raise growing season surface soil temperatures by 4-5°C, and to lengthen the growing season. The warming treatment is crossed with a soil moisture manipulation to distinguish effects due to higher temperatures from those due to drier soil. Each plot is a common garden sown with high and low elevation provenances of limber pine (Pinus flexilis) and Engelmann spruce (Picea engelmannii). We established an additional set of experimental plots to examine treatment effects on alpine species phenology, growth and reproduction. Under ambient conditions in 2009, tree seedling germination rate, lifespan, and first season survival was higher within the species’ current range than in the alpine, and for Engelmann spruce, was higher at the low elevation limit than the high elevation limit. Source population (low vs. high elevation) was a significant factor explaining natural variation in

  14. The Impact of Standing Water and Irrigation on AMSR-E Sensitivity to Soil Moisture over the NAFE'06 Experiment Area

    Technology Transfer Automated Retrieval System (TEKTRAN)

    AMSR-E sensitivity to soil moisture and its accuracy have been studied over a wide variety of surface conditions and weather regimes using both in situ measured data and aircraft derived soil moisture estimates. Several extensive soil moisture field campaigns involving ground and air-borne component...

  15. Cognitive Performance Is Highly Sensitive to Prior Experience in Mice with a Learning and Memory Deficit: Failure Leads to More Failure

    ERIC Educational Resources Information Center

    Hebda-Bauer, Elaine K.; Watson, Stanley J.; Akil, Huda

    2005-01-01

    The impact of a previously successful or unsuccessful experience on the subsequent acquisition of a related task is not well understood. The nature of past experience may have even greater impact in individuals with learning deficits, as their cognitive processes can be easily disrupted. Mice with a targeted disruption of the [alpha] and [delta]…

  16. Is it efficient to co-compost and co-vermicompost green waste with biochar and/or clay to reduce CO2 emissions? A short-term laboratory experiment on (vermi)composts with additives.

    NASA Astrophysics Data System (ADS)

    Barthod, Justine; Rumpel, Cornélia; Paradelo, Remigio; Dignac, Marie-France

    2016-04-01

    Intensive farming practices can lead to a depletion of soil organic matter, negatively impacting important soil properties such as structural stability, fertility and C storage. The addition of organic amendments such as compost and vermicompost, rich in carbon, helps maintaining soil organic matter levels or restoring degraded soils. Composting and vermicomposting are based on stabilization of organic matter through the mineralization of easily decomposable organic matter compounds, therefore releasing greenhouse gases, including CO2. The aim of this study was to evaluate the global potential reduction of such emissions by the use of additives (2:1 clay and/or biochar): during (vermi)composting processes and after use of the final products as soil amendments. We hypothesized that the interactions between the additives and organic matter may lead to carbon stabilization and that such interactions may be enhanced by the presence of worms (Eisenia). We added in different proportions clay (25% or 50%), biochar (10%) and a mixture of biochar (10%) with clay (25%) to pre-composted green waste. The CO2 emissions of the composting and vermicomposting processes were measured during 21 days. After that, the amendments were added to a loamy cambisol soil and the CO2 emissions were monitored during 30 days of a laboratory experiment. The most efficient treatments in terms of reducing global CO2 emissions were the co-vermicomposting process with 25% clay followed by co-composting with 50% clay and with 10% biochar plus 25% clay. In this treatment (vermicompost with 25% clay), the carbon emissions were decreased by up to 44% compared to regular compost. Addition of biochar reduced CO2 emissions only during composting. Co-composting with biochar could be a promising avenue to limit global CO2 emissions whereas in presence of worms clay additions are better suited. These findings suggest that the presence of worms increased the formation of organo-mineral associations and thus C

  17. Anxiety Sensitivity and Panic Attacks: A 1-Year Longitudinal Study

    ERIC Educational Resources Information Center

    Li, Wen; Zinbarg, Richard E.

    2007-01-01

    The hypothesis that anxiety sensitivity (AS) is a risk factor for panic genesis has obtained compelling support, but the clinical/practical importance of AS in panic genesis has been questioned. In addition, the association between panic experience and AS increase has not been clearly demonstrated. Through this 1-year longitudinal study among…

  18. Sensitive skin.

    PubMed

    Misery, L; Loser, K; Ständer, S

    2016-02-01

    Sensitive skin is a clinical condition defined by the self-reported facial presence of different sensory perceptions, including tightness, stinging, burning, tingling, pain and pruritus. Sensitive skin may occur in individuals with normal skin, with skin barrier disturbance, or as a part of the symptoms associated with facial dermatoses such as rosacea, atopic dermatitis and psoriasis. Although experimental studies are still pending, the symptoms of sensitive skin suggest the involvement of cutaneous nerve fibres and neuronal, as well as epidermal, thermochannels. Many individuals with sensitive skin report worsening symptoms due to environmental factors. It is thought that this might be attributed to the thermochannel TRPV1, as it typically responds to exogenous, endogenous, physical and chemical stimuli. Barrier disruptions and immune mechanisms may also be involved. This review summarizes current knowledge on the epidemiology, potential mechanisms, clinics and therapy of sensitive skin. PMID:26805416

  19. Scale/TSUNAMI Sensitivity Data for ICSBEP Evaluations

    SciTech Connect

    Rearden, Bradley T; Reed, Davis Allan; Lefebvre, Robert A; Mueller, Don; Marshall, William BJ J

    2011-01-01

    The Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI) software developed at Oak Ridge National Laboratory (ORNL) as part of the Scale code system provide unique methods for code validation, gap analysis, and experiment design. For TSUNAMI analysis, sensitivity data are generated for each application and each existing or proposed experiment used in the assessment. The validation of diverse sets of applications requires potentially thousands of data files to be maintained and organized by the user, and a growing number of these files are available through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE) distributed through the International Criticality Safety Benchmark Evaluation Program (ICSBEP). To facilitate the use of the IHECSBE benchmarks in rigorous TSUNAMI validation and gap analysis techniques, ORNL generated SCALE/TSUNAMI sensitivity data files (SDFs) for several hundred benchmarks for distribution with the IHECSBE. For the 2010 edition of IHECSBE, the sensitivity data were generated using 238-group cross-section data based on ENDF/B-VII.0 for 494 benchmark experiments. Additionally, ORNL has developed a quality assurance procedure to guide the generation of Scale inputs and sensitivity data, as well as a graphical user interface to facilitate the use of sensitivity data in identifying experiments and applying them in validation studies.

  20. Plant uptake and downward migration of 85Sr and 137Cs after their deposition on to flooded rice fields: lysimeter experiments with and without the addition of KCl and lime.

    PubMed

    Choi, Y H; Lim, K M; Choi, H J; Choi, G S; Lee, H S; Lee, C W

    2005-01-01

    In order to study the plant uptake and downward migration of radiostrontium and radiocesium deposited on to a flooded rice field, 85Sr and 137Cs were applied to the standing water over an acidic sandy soil in planted lysimeters. The plant uptake was quantified with the areal transfer factor (TFa, m2 kg(-1)-dry plant). Following the spiking 14 days after transplanting, the TFa values for the hulled seeds were 3.9 x 10(-4) for 85Sr and 1.4 x 10(-4) for 137Cs, whereas those for the straws were 1.3 x 10(-2) and 3.2 x 10(-4), respectively. The 137Cs TFa from the spiking at the anthesis/milky-ripe stage was several times higher than that from the earlier spiking, whereas the difference was much less in the 85Sr TFa. Such an increase in the 137Cs TFa was attributed mainly to an enhanced plant-base uptake. The addition of KCl and lime after the spiking significantly reduced the TFa values of both radionuclides. The reducing effect was greater for the later spiking. An appreciable fraction of the applied activity leached out of the lysimeter for 85Sr, whereas a negligible fraction leached for 137Cs. The leaching was remarkably increased by the KCl and lime addition for both. A conspicuous localization of 137Cs with respect to the soil surface was observed. In a batch experiment, the 137Cs concentration in the standing water decreased more rapidly than that of 85Sr, both of which were fitted to the power functions of the elapsed time. To add KCl and lime slowed such decreases to lessen the distribution coefficients (Kd) of both 85Sr and 137Cs. PMID:15465178

  1. Climate Sensitivity

    SciTech Connect

    Lindzen, Richard

    2011-11-09

    Warming observed thus far is entirely consistent with low climate sensitivity. However, the result is ambiguous because the sources of climate change are numerous and poorly specified. Model predictions of substantial warming aredependent on positive feedbacks associated with upper level water vapor and clouds, but models are notably inadequate in dealing with clouds and the impacts of clouds and water vapor are intimately intertwined. Various approaches to measuring sensitivity based on the physics of the feedbacks will be described. The results thus far point to negative feedbacks. Problems with these approaches as well as problems with the concept of climate sensitivity will be described.

  2. The Relationship between Experiences of Discrimination and Mental Health among Lesbians and Gay Men: An Examination of Internalized Homonegativity and Rejection Sensitivity as Potential Mechanisms

    ERIC Educational Resources Information Center

    Feinstein, Brian A.; Goldfried, Marvin R.; Davila, Joanne

    2012-01-01

    Objective: The current study used path analysis to examine potential mechanisms through which experiences of discrimination influence depressive and social anxiety symptoms. Method: The sample included 218 lesbians and 249 gay men (total N = 467) who participated in an online survey about minority stress and mental health. The proposed model…

  3. Brief Report: Oxytocin Enhances Paternal Sensitivity to a Child with Autism--A Double-Blind Within-Subject Experiment with Intranasally Administered Oxytocin

    ERIC Educational Resources Information Center

    Naber, Fabienne B. A.; Poslawsky, Irina E.; van Ijzendoorn, Marinus H.; van Engeland, Herman; Bakermans-Kranenburg, Marian J.

    2013-01-01

    Oxytocin seems associated with parenting style, and experimental work showed positive effects of intranasally administered oxytocin on parenting style of fathers. Here, the first double-blind, placebo-controlled, within-subject experiment with intranasal oxytocin administration to fathers of children with autism spectrum disorder (ASD) is…

  4. Gluten Sensitivity

    MedlinePlus

    Gluten is a protein found in wheat, rye, and barley. It is found mainly in foods but ... products like medicines, vitamins, and supplements. People with gluten sensitivity have problems with gluten. It is different ...

  5. Gluten Sensitivity

    MedlinePlus

    ... have problems with gluten. It is different from celiac disease, an immune disease in which people can't ... the symptoms of gluten sensitivity are similar to celiac disease. They include tiredness and stomachaches. It can cause ...

  6. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  7. The feasibility of retrieving vertical temperature profiles from satellite nadir UV observations: A sensitivity analysis and an inversion experiment with neural network algorithms

    NASA Astrophysics Data System (ADS)

    Sellitto, P.; Del Frate, F.

    2014-07-01

    Atmospheric temperature profiles are inferred from passive satellite instruments, using thermal infrared or microwave observations. Here we investigate on the feasibility of the retrieval of height resolved temperature information in the ultraviolet spectral region. The temperature dependence of the absorption cross sections of ozone in the Huggins band, in particular in the interval 320-325 nm, is exploited. We carried out a sensitivity analysis and demonstrated that a non-negligible information on the temperature profile can be extracted from this small band. Starting from these results, we developed a neural network inversion algorithm, trained and tested with simulated nadir EnviSat-SCIAMACHY ultraviolet observations. The algorithm is able to retrieve the temperature profile with root mean square errors and biases comparable to existing retrieval schemes that use thermal infrared or microwave observations. This demonstrates, for the first time, the feasibility of temperature profiles retrieval from space-borne instruments operating in the ultraviolet.

  8. Implications of Childhood Experiences for the Health and Adaptation of Lesbian, Gay, and Bisexual Individuals: Sensitivity to Developmental Process in Future Research

    PubMed Central

    Rosario, Margaret

    2015-01-01

    The empirical literature on lesbian, gay, and bisexual (LGB) individuals has predominantly focused on sexual-orientation disparities between LGB and heterosexual individuals on health and adaptation, as well as on the role of gay-related or minority stress in the health and adaptation of LGB individuals. Aside from demographic control variables, the initial predictor is a marker of sexual orientation or LGB-related experience (e.g., minority stress). Missing are potential strengths and vulnerabilities that LGB individuals develop over time and bring to bear on their sexual identity development and other LGB-related experiences. Those strengths and vulnerabilities may have profound consequences for the sexual identity development, health, and adaptation of LGB individuals. Here, I focus on one such set of strengths and vulnerabilities derived from attachment. I conclude by emphasizing the importance of attachment in the lives of LGB individuals and the need to identify other developmental processes that may be equally consequential. PMID:26900586

  9. Geophysical variables and behavior: XCII. Experimental elicitation of the experience of a sentient being by right hemispheric, weak magnetic fields: interaction with temporal lobe sensitivity.

    PubMed

    Cook, C M; Persinger, M A

    2001-04-01

    We tested the hypothesis that proportionally more people with above average numbers of complex partial epileptic-like experiences before the experiment would report a proximal presence during applications of a weak (1 microTesla), frequency-modulated magnetic field over the right hemisphere. Each of 16 subjects sat in a darkened, quiet room and was exposed for 20 min. to complex fields, applied through a helmet, either along the right hemisphere or across both hemispheres. None of the 8 subjects with below average scores reported a presence during the applications of the magnetic fields while 75% and 60% of the 8 subjects with above average scores reported a presence during right hemispheric and bilateral stimulation, respectively. PMID:11361305

  10. Sensitization of stainless steel

    NASA Technical Reports Server (NTRS)

    Nagy, James P.

    1990-01-01

    The objective of this experiment is to determine the corrosion rates of 18-8 stainless steels that have been sensitized at various temperatures and to show the application of phase diagrams. The laboratory instructor will assign each student a temperature, ranging from 550 C to 1050 C, to which the sample will be heated. Further details of the experimental procedure are detailed.

  11. Decisions reduce sensitivity to subsequent information.

    PubMed

    Bronfman, Zohar Z; Brezis, Noam; Moran, Rani; Tsetsos, Konstantinos; Donner, Tobias; Usher, Marius

    2015-07-01

    Behavioural studies over half a century indicate that making categorical choices alters beliefs about the state of the world. People seem biased to confirm previous choices, and to suppress contradicting information. These choice-dependent biases imply a fundamental bound of human rationality. However, it remains unclear whether these effects extend to lower level decisions, and only little is known about the computational mechanisms underlying them. Building on the framework of sequential-sampling models of decision-making, we developed novel psychophysical protocols that enable us to dissect quantitatively how choices affect the way decision-makers accumulate additional noisy evidence. We find robust choice-induced biases in the accumulation of abstract numerical (experiment 1) and low-level perceptual (experiment 2) evidence. These biases deteriorate estimations of the mean value of the numerical sequence (experiment 1) and reduce the likelihood to revise decisions (experiment 2). Computational modelling reveals that choices trigger a reduction of sensitivity to subsequent evidence via multiplicative gain modulation, rather than shifting the decision variable towards the chosen alternative in an additive fashion. Our results thus show that categorical choices alter the evidence accumulation mechanism itself, rather than just its outcome, rendering the decision-maker less sensitive to new information. PMID:26108628

  12. Decisions reduce sensitivity to subsequent information

    PubMed Central

    Bronfman, Zohar Z.; Brezis, Noam; Moran, Rani; Tsetsos, Konstantinos; Donner, Tobias; Usher, Marius

    2015-01-01

    Behavioural studies over half a century indicate that making categorical choices alters beliefs about the state of the world. People seem biased to confirm previous choices, and to suppress contradicting information. These choice-dependent biases imply a fundamental bound of human rationality. However, it remains unclear whether these effects extend to lower level decisions, and only little is known about the computational mechanisms underlying them. Building on the framework of sequential-sampling models of decision-making, we developed novel psychophysical protocols that enable us to dissect quantitatively how choices affect the way decision-makers accumulate additional noisy evidence. We find robust choice-induced biases in the accumulation of abstract numerical (experiment 1) and low-level perceptual (experiment 2) evidence. These biases deteriorate estimations of the mean value of the numerical sequence (experiment 1) and reduce the likelihood to revise decisions (experiment 2). Computational modelling reveals that choices trigger a reduction of sensitivity to subsequent evidence via multiplicative gain modulation, rather than shifting the decision variable towards the chosen alternative in an additive fashion. Our results thus show that categorical choices alter the evidence accumulation mechanism itself, rather than just its outcome, rendering the decision-maker less sensitive to new information. PMID:26108628

  13. The Sensitivity of Atmospheric Dispersion Calculations in Near-field Applications: Modeling of the Full Scale RDD Experiments with Operational Models in Canada, Part I.

    PubMed

    Lebel, Luke; Bourgouin, Pierre; Chouhan, Sohan; Ek, Nils; Korolevych, Volodymyr; Malo, Alain; Bensimon, Dov; Erhardt, Lorne

    2016-05-01

    Three radiological dispersal devices were detonated in 2012 under controlled conditions at Defence Research and Development Canada's Experimental Proving Grounds in Suffield, Alberta. Each device comprised a 35-GBq source of (140)La. The dataset obtained is used in this study to assess the MLCD, ADDAM, and RIMPUFF atmospheric dispersion models. As part one of a two-part study, this paper focuses on examining the capabilities of the above three models and evaluating how well their predictions of air concentration and ground deposition match observations from the full-scale RDD experiments. PMID:27023037

  14. Constrained sensitivity theory

    SciTech Connect

    Greenspan, E.; Williams, M.L.

    1980-01-01

    In sensitivity and uncertainty analysis of to-be-built reactors it is customary to use k-reset sensitivity functions - accounting for the combined effects of the change (or uncertainty) in the input data and of the alteration in some design variable applied to maintain criticality. Critical reactors are usually subjected to several constraints, such as power peaking factor and breeding ratio constraints, in addition to the criticality constraint. Perturbation theory formulations which can account, simultaneously, for several constraints both in critical reactors and in source driven systems (such as radiation shields and blankets of fusion devices) are presented. All the sensitivity and uncertainty analyses of source driven systems carried out so far used unconstrained sensitivity functions despite the fact that such systems can be also subjected to a variety of constraints.

  15. Sensitivity of the curve-to-growth technique utilized in rocket experiments to determine the line shape of solar He I resonance lines

    NASA Technical Reports Server (NTRS)

    Wu, C. Y. R.; Ogawa, H. S.

    1986-01-01

    The sensitivity of the curve-of-growth (COG) technique utilized in rocket measurements to determine the line profiles of the solar He I resonance emissions is theoretically examined with attention to the possibility of determining the line core shape using this technique. The line at 584.334 A is chosen as an illustration. Various possible source functions of the solar line have been assumed in the computation of the integrated transmitted intensity. A recent observational data set obtained by the present researchers is used as the constraint of the computation. It is confirmed that the COG technique can indeed provide a good measurement of the solar line width. However, to obtain detailed knowledge of the solar profile at line center and in the core region, (1) it is necessary to be able to carry out relative solar flux measurements with a 1-percent or better precision, and (2) it must be possible to measure the He gas pressure in the absorption cell to lower than 0.1 mtorr. While these numbers apply specifically to the present geometry, the results are readily scaled to other COG measurements using other experimental parameters.

  16. Impacts of snow and glaciers over Tibetan Plateau on Holocene climate change: Sensitivity experiments with a coupled model of intermediate complexity

    NASA Astrophysics Data System (ADS)

    Jin, Liya; Ganopolski, Andrey; Chen, Fahu; Claussen, Martin; Wang, Huijun

    2005-09-01

    An Earth system model of intermediate complexity has been used to investigate the sensitivity of simulated global climate to gradually increased snow and glacier cover over the Tibetan Plateau for the last 9000 years (9 kyr). The simulations show that in the mid-Holocene at about 6 kyr before present (BP) the imposed ice sheets over the Tibetan Plateau induces summer precipitation decreases strongly in North Africa and South Asia, and increases in Southeast Asia. The response of vegetation cover to the imposed ice sheets over the Tibetan Plateau is not synchronous in South Asia and in North Africa, showing an earlier and, hence, a more rapid decrease in vegetation cover in North Africa from 9 to 6 kyr BP while it has almost no influence on that in south Asia until 5 kyr BP. The simulation results suggest that the snow and glacier environment over the Tibetan Plateau is an important factor for Holocene climate variability in North Africa, South Asia and Southeast Asia.

  17. Simulation of High-Latitude Hydrological Processes in the Torne-Kalix Basin: PILPS Phase 2(e). 3; Equivalent Model Representation and Sensitivity Experiments

    NASA Technical Reports Server (NTRS)

    Bowling, Laura C.; Lettenmaier, Dennis P.; Nijssen, Bart; Polcher, Jan; Koster, Randal D.; Lohmann, Dag; Houser, Paul R. (Technical Monitor)

    2002-01-01

    The Project for Intercomparison of Land Surface Parameterization Schemes (PILPS) Phase 2(e) showed that in cold regions the annual runoff production in Land Surface Schemes (LSSs) is closely related to the maximum snow accumulation, which in turn is controlled in large part by winter sublimation. To help further explain the relationship between snow cover, turbulent exchanges and runoff production, a simple equivalent model-(SEM) was devised to reproduce the seasonal and annual fluxes simulated by 13 LSSs that participated in PILPS Phase 2(e). The design of the SEM relates the annual partitioning of precipitation and energy in the LSSs to three primary parameters: snow albedo, effective aerodynamic resistance and evaporation efficiency. Isolation of each of the parameters showed that the annual runoff production was most sensitive to the aerodynamic resistance. The SEM was somewhat successful in reproducing the observed LSS response to a decrease in shortwave radiation and changes in wind speed forcings. SEM parameters derived from the reduced shortwave forcings suggested that increased winter stability suppressed turbulent heat fluxes over snow. Because winter sensible heat fluxes were largely negative, reductions in winter shortwave radiation imply an increase in annual average sensible heat.

  18. Moving in an Environment of Induced Sensorimotor Incongruence Does Not Influence Pain Sensitivity in Healthy Volunteers: A Randomised Within-Subject Experiment

    PubMed Central

    Wand, Benedict Martin; Szpak, Lareina; George, Pamela J.; Bulsara, Max K.; O’Connell, Neil Edward; Moseley, G. Lorimer

    2014-01-01

    Objectives It has been proposed that in the same way that conflict between vestibular and visual inputs leads to motion sickness, conflict between motor commands and sensory information associated with these commands may contribute to some chronic pain states. Attempts to test this hypothesis by artificially inducing a state of sensorimotor incongruence and assessing self-reported pain have yielded equivocal results. To help clarify the effect sensorimotor incongruence has on pain we investigated the effect of moving in an environment of induced incongruence on pressure pain thresholds (PPT) and the pain experienced immediately on completion of PPT testing. Methods Thirty-five healthy subjects performed synchronous and asynchronous upper-limb movements with and without mirror visual feedback in random order. We measured PPT over the elbow and the pain evoked by testing. Generalised linear mixed-models were performed for each outcome. Condition (four levels) and baseline values for each outcome were within-subject factors. Results There was no effect of condition on PPT (p = 0.887) or pressure-evoked pain (p = 0.771). A sensitivity analysis using only the first PPT measure after each condition confirmed the result (p = 0.867). Discussion Inducing a state of movement related sensorimotor incongruence in the upper-limb of healthy volunteers does not influence PPT, nor the pain evoked by testing. We found no evidence that sensorimotor incongruence upregulates the nociceptive system in healthy volunteers. PMID:24709995

  19. Observing system simulation experiments related to space-borne LIDAR wind profiling. I - Forecast impacts of highly idealized observing systems. II - Sensitivity to atmospheric and instrumental influences

    NASA Technical Reports Server (NTRS)

    Dlouhy, R.; Halem, M.

    1984-01-01

    It is pointed out that extended-range numerical weather prediction requires complete global and accurate three-dimensional fields of temperature, moisture, and winds as a function of pressure throughout the troposphere, lower stratosphere, and at the earth's surface. Recent developments in the use of incoherent optical radar (LIDAR) systems indicate the feasibility of obtaining pressure as a function of height with presumably very high vertical resolution and accuracy. In evaluating the feasibility of an employment of spaceborne LIDAR systems as an aid for obtaining data required for weather prediction, simulation studies could provide important information. The present investigation is concerned with the conduction of such simulation experiments. It is found that the results of a composite system of temperature and pressure show significant improvements over those of temperature only. The effects of simulating several sources of LIDAR wind error for two different representations of nature are also examined.

  20. ‘Girls need to strengthen each other as a group’: experiences from a gender-sensitive stress management intervention by youth-friendly Swedish health services – a qualitative study

    PubMed Central

    2013-01-01

    Background Mental health problems among young people, and girls and young women in particular, are a well-known health problem. Such gendered mental health patterns are also seen in conjunction with stress-related problems, such as anxiety and depression and psychosomatic complaints. Thus, intervention models tailored to the health care situation experienced by young women within a gendered and sociocultural context are needed. This qualitative study aims to illuminate young women’s experiences of participating in a body-based, gender-sensitive stress management group intervention by youth-friendly health services in northern Sweden. Methods A physiotherapeutic body-based, health-promoting, gender-sensitive stress management intervention was created by youth-friendly Swedish health services. The stress management courses (n = 7) consisted of eight sessions, each lasting about two hours, and were led by the physiotherapist at the youth centre. The content in the intervention had a gender-sensitive approach, combining reflective discussions; short general lectures on, for example, stress and pressures related to body ideals; and physiotherapeutic methods, including body awareness and relaxation. Follow-up interviews were carried out with 32 young women (17–25 years of age) after they had completed the intervention. The data were analysed with qualitative content analysis. Results The overall results of our interview analysis suggest that the stress management course we evaluated facilitated ‘a space for gendered and embodied empowerment in a hectic life’, implying that it both contributed to a sense of individual growth and allowed participants to unburden themselves of stress problems within a trustful and supportive context. Participants’ narrated experiences of ‘finding a social oasis to challenge gendered expectations’, ‘being bodily empowered’, and ‘altering gendered positions and stance to life’ point to empowering processes of change that

  1. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects. PMID:24772784

  2. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  3. Nonenhanced MR Angiography of the Hand with Flow-Sensitive Dephasing–prepared Balanced SSFP Sequence: Initial Experience with Systemic Sclerosis

    PubMed Central

    Fan, Zhaoyang; Davarpanah, Amir H.; Hodnett, Philip A.; Varga, John; Carr, James C.; Li, Debiao

    2011-01-01

    Purpose: To compare the image quality and degree of vessel narrowing at flow-sensitive dephasing (FSD) magnetic resonance (MR) angiography of the hands with those at contrast material–enhanced MR angiography of the hands in patients with systemic sclerosis. Materials and Methods: In a single-center study with institutional review board approval and HIPAA compliance, six healthy volunteers and six patients with systemic sclerosis were imaged at 1.5-T nonenhanced FSD MR angiography followed by contrast-enhanced MR angiography. Sixteen vascular segments in four vessel groups were evaluated for image quality and assessed semiquantitatively for stenosis degree by using Likert scales. The nonparametric Wilcoxon signed rank test was used to perform pairwise comparisons of the MR angiographic techniques. P < .05 indicated statistical significance. Results: Performing FSD MR angiography, as compared with time-resolved MR angiography and high-spatial-resolution MR angiography, improved the image quality for all arterial segments combined in the control (mean score, 2.9 [FSD] vs 3.7 [time-resolved technique] and 3.1 [high-spatial-resolution technique]) and patient (mean score, 4.0 [FSD] vs 4.2 [time-resolved technique] and 4.3 [high-spatial-resolution technique]) groups. In the control subjects, FSD angiography depicted proper digital artery stenosis that was less severe (mean grade, 0.7) than that seen with the time-resolved (mean grade, 1.6) and high-spatial-resolution (mean grade, 1.0) techniques. In the patient group, FSD angiography depicted lower degrees of stenosis, with a lower mean grade for all segments combined (1.3) compared with the corresponding mean grades for time-resolved (1.5) and high-spatial-resolution (1.8) MR angiography. Conclusion: Preliminary data indicate that the proposed nonenhanced FSD MR angiographic technique is an improvement over existing contrast-enhanced techniques for evaluation of the hand vasculature in vasospastic disorders of the hand

  4. Effects of forest patch size on physiological stress and immunocompetence in an area-sensitive passerine, the Eurasian treecreeper (Certhia familiaris): an experiment.

    PubMed Central

    Suorsa, Petri; Helle, Heikki; Koivunen, Vesa; Huhta, Esa; Nikula, Ari; Hakkarainen, Harri

    2004-01-01

    We manipulated the primary brood size of Eurasian treecreepers (Certhia familiaris) breeding in different sized forest patches (0.5-12.8 ha) in moderately fragmented landscapes. We examined the effects of brood size manipulation (reduced, control, enlarged) and forest patch size on physiological stress (heterophil-lymphocyte ratios; H/L), body condition and cell-mediated immunocompetence (phytohaemagglutinin test). Nestlings' H/L ratios were negatively related to forest patch area in control and enlarged broods, whereas no effects were found in reduced broods. The effects of forest patch area were strongest in enlarged broods, which had, in general, twofold higher H/L ratios than control and reduced broods. The elevated H/L ratios were positively related to nestling mortality and negatively correlated with body-condition indices suggesting that the origin of stress in nestlings was mainly nutritional. Cell-mediated immunity of nestlings was not related to brood manipulation or to forest patch size. Also, the H/L ratios of adults were not related to brood manipulation or forest patch size. In addition, parental H/L ratios and body condition were not related to nestling H/L ratios. Our results suggest that during the breeding period the deleterious effects of habitat loss are seen explicitly in growing young. PMID:15101703

  5. The Subglacial Access and Fast Ice Research Experiment (SAFIRE): 2. High magnitude englacial strain detected with autonomous phase-sensitive FMCW radar on Store Glacier, West Greenland

    NASA Astrophysics Data System (ADS)

    Young, Tun Jan; Christoffersen, Poul; Nicholls, Keith; Bun Lok, Lai; Doyle, Samuel; Hubbard, Bryn; Stewart, Craig; Hofstede, Coen; Bougamont, Marion; Todd, Joseph; Brennan, Paul; Hubbard, Alun

    2016-04-01

    Fast-flowing outlet glaciers terminating in the sea drain 90% of the Greenland Ice Sheet. It is well-known that these glaciers flow rapidly due to fast basal motion, but its contributing processes and mechanisms are, however, poorly understood. In particular, there is a paucity of data to quantify the extent to which basal sliding and internal ice deformation by viscous creep contribute to the fast motion of Greenland outlet glaciers. To study these processes, we installed a network of global positioning system (GPS) receivers around an autonomous phase-sensitive radio-echo sounder (ApRES) capable of imaging internal reflectors and the glacier bed. The ApRES system, including antennas, were custom-designed to monitor and image ice sheets and ice shelves in monostatic and multiple-input multiple-output (MIMO) modes. Specifically, the system transmits a frequency-modulated continuous-wave (FMCW) that increases linearly from 200 to 400 MHz over a period of 1 second. We installed this system 30 km up-flow of the tidewater terminus of Store Glacier, which flows into Uummannaq Fjord in West Greenland, and data were recorded every hour from 06 May to 16 July 2014 and every 4 hours from 26 July to 11 December 2014. The same site was used to instrument 600 m deep boreholes drilled to the bed as part of the SAFIRE research programme. With range and reflector distances captured at high temporal (hourly) and spatial (millimetre) resolutions, we obtained a unique, 6-month-long time series of strain through the vertical ice column at the drill site where tilt was independently recorded in a borehole. Our results show variable, but persistently high vertical strain. In the upper three-fourths of the ice column, we have calculated strain rates on the order of a few percent per year, and the strain regime curiously shifts from vertical thinning in winter to vertical thickening at the onset of summer melt. In the basal ice layer we observed high-magnitude vertical strain rates on

  6. Additive usage levels.

    PubMed

    Langlais, R

    1996-01-01

    With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century. PMID:8792135

  7. Development and Performance of Detectors for the Cryogenic Dark Matter Search Experiment with an Increased Sensitivity Based on a Maximum Likelihood Analysis of Beta Contamination

    SciTech Connect

    Driscoll, Donald D.; /Case Western Reserve U.

    2004-01-01

    The Cryogenic Dark Matter Search (CDMS) uses cryogenically-cooled detectors made of germanium and silicon in an attempt to detect dark matter in the form of Weakly-Interacting Massive Particles (WIMPs). The expected interaction rate of these particles is on the order of 1/kg/day, far below the 200/kg/day expected rate of background interactions after passive shielding and an active cosmic ray muon veto. Our detectors are instrumented to make a simultaneous measurement of both the ionization energy and thermal energy deposited by the interaction of a particle with the crystal substrate. A comparison of these two quantities allows for the rejection of a background of electromagnetically-interacting particles at a level of better than 99.9%. The dominant remaining background at a depth of {approx} 11 m below the surface comes from fast neutrons produced by cosmic ray muons interacting in the rock surrounding the experiment. Contamination of our detectors by a beta emitter can add an unknown source of unrejected background. In the energy range of interest for a WIMP study, electrons will have a short penetration depth and preferentially interact near the surface. Some of the ionization signal can be lost to the charge contacts there and a decreased ionization signal relative to the thermal signal will cause a background event which interacts at the surface to be misidentified as a signal event. We can use information about the shape of the thermal signal pulse to discriminate against these surface events. Using a subset of our calibration set which contains a large fraction of electron events, we can characterize the expected behavior of surface events and construct a cut to remove them from our candidate signal events. This thesis describes the development of the 6 detectors (4 x 250 g Ge and 2 x 100 g Si) used in the 2001-2002 CDMS data run at the Stanford Underground Facility with a total of 119 livedays of data. The preliminary results presented are based on the

  8. An additional middle cuneiform?

    PubMed Central

    Brookes-Fazakerley, S.D.; Jackson, G.E.; Platt, S.R.

    2015-01-01

    Additional cuneiform bones of the foot have been described in reference to the medial bipartite cuneiform or as small accessory ossicles. An additional middle cuneiform has not been previously documented. We present the case of a patient with an additional ossicle that has the appearance and location of an additional middle cuneiform. Recognizing such an anatomical anomaly is essential for ruling out second metatarsal base or middle cuneiform fractures and for the preoperative planning of arthrodesis or open reduction and internal fixation procedures in this anatomical location. PMID:26224890

  9. Carbamate deposit control additives

    SciTech Connect

    Honnen, L.R.; Lewis, R.A.

    1980-11-25

    Deposit control additives for internal combustion engines are provided which maintain cleanliness of intake systems without contributing to combustion chamber deposits. The additives are poly(oxyalkylene) carbamates comprising a hydrocarbyloxyterminated poly(Oxyalkylene) chain of 2-5 carbon oxyalkylene units bonded through an oxycarbonyl group to a nitrogen atom of ethylenediamine.

  10. Identifying sensitive areas of adaptive observations for prediction of the Kuroshio large meander using a shallow-water model

    NASA Astrophysics Data System (ADS)

    Zou, Guang'an; Wang, Qiang; Mu, Mu

    2016-09-01

    Sensitive areas for prediction of the Kuroshio large meander using a 1.5-layer, shallow-water ocean model were investigated using the conditional nonlinear optimal perturbation (CNOP) and first singular vector (FSV) methods. A series of sensitivity experiments were designed to test the sensitivity of sensitive areas within the numerical model. The following results were obtained: (1) the eff ect of initial CNOP and FSV patterns in their sensitive areas is greater than that of the same patterns in randomly selected areas, with the eff ect of the initial CNOP patterns in CNOP sensitive areas being the greatest; (2) both CNOP- and FSV-type initial errors grow more quickly than random errors; (3) the eff ect of random errors superimposed on the sensitive areas is greater than that of random errors introduced into randomly selected areas, and initial errors in the CNOP sensitive areas have greater eff ects on final forecasts. These results reveal that the sensitive areas determined using the CNOP are more sensitive than those of FSV and other randomly selected areas. In addition, ideal hindcasting experiments were conducted to examine the validity of the sensitive areas. The results indicate that reduction (or elimination) of CNOP-type errors in CNOP sensitive areas at the initial time has a greater forecast benefit than the reduction (or elimination) of FSV-type errors in FSV sensitive areas. These results suggest that the CNOP method is suitable for determining sensitive areas in the prediction of the Kuroshio large-meander path.

  11. CONTINUOUSLY SENSITIVE BUBBLE CHAMBER

    DOEpatents

    Good, R.H.

    1959-08-18

    A radiation detector of the bubble chamber class is described which is continuously sensitive and which does not require the complex pressure cycling equipment characteristic of prior forms of the chamber. The radiation sensitive element is a gas-saturated liquid and means are provided for establishing a thermal gradient across a region of the liquid. The gradient has a temperature range including both the saturation temperature of the liquid and more elevated temperatures. Thus a supersaturated zone is created in which ionizing radiations may give rise to visible gas bubbles indicative of the passage of the radiation through the liquid. Additional means are provided for replenishing the supply of gas-saturated liquid to maintaincontinuous sensitivity.

  12. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  13. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  14. Sensitivity of nonuniform sampling NMR.

    PubMed

    Palmer, Melissa R; Suiter, Christopher L; Henry, Geneive E; Rovnyak, James; Hoch, Jeffrey C; Polenova, Tatyana; Rovnyak, David

    2015-06-01

    Many information-rich multidimensional experiments in nuclear magnetic resonance spectroscopy can benefit from a signal-to-noise ratio (SNR) enhancement of up to about 2-fold if a decaying signal in an indirect dimension is sampled with nonconsecutive increments, termed nonuniform sampling (NUS). This work provides formal theoretical results and applications to resolve major questions about the scope of the NUS enhancement. First, we introduce the NUS Sensitivity Theorem in which any decreasing sampling density applied to any exponentially decaying signal always results in higher sensitivity (SNR per square root of measurement time) than uniform sampling (US). Several cases will illustrate this theorem and show that even conservative applications of NUS improve sensitivity by useful amounts. Next, we turn to a serious limitation of uniform sampling: the SNR by US decreases for extending evolution times, and thus total experimental times, beyond 1.26T2 (T2 = signal decay constant). Thus, SNR and resolution cannot be simultaneously improved by extending US beyond 1.26T2. We find that NUS can eliminate this constraint, and we introduce the matched NUS SNR Theorem: an exponential sampling density matched to the signal decay always improves the SNR with additional evolution time. Though proved for a specific case, broader classes of NUS densities also improve SNR with evolution time. Applications of these theoretical results are given for a soluble plant natural product and a solid tripeptide (u-(13)C,(15)N-MLF). These formal results clearly demonstrate the inadequacies of applying US to decaying signals in indirect nD-NMR dimensions, supporting a broader adoption of NUS. PMID:25901905

  15. Defect-engineered graphene chemical sensors with ultrahigh sensitivity.

    PubMed

    Lee, Geonyeop; Yang, Gwangseok; Cho, Ara; Han, Jeong Woo; Kim, Jihyun

    2016-05-25

    We report defect-engineered graphene chemical sensors with ultrahigh sensitivity (e.g., 33% improvement in NO2 sensing and 614% improvement in NH3 sensing). A conventional reactive ion etching system was used to introduce the defects in a controlled manner. The sensitivity of graphene-based chemical sensors increased with increasing defect density until the vacancy-dominant region was reached. In addition, the mechanism of gas sensing was systematically investigated via experiments and density functional theory calculations, which indicated that the vacancy defect is a major contributing factor to the enhanced sensitivity. This study revealed that defect engineering in graphene has significant potential for fabricating ultra-sensitive graphene chemical sensors. PMID:26679757

  16. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  17. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  18. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  19. Adverse reactions to the sulphite additives

    PubMed Central

    Misso, Neil LA

    2012-01-01

    Sulphites are widely used as preservative and antioxidant additives in the food and pharmaceutical industries. Exposure to sulphites has been reported to induce a range of adverse clinical effects in sensitive individuals, ranging from dermatitis, urticaria, flushing, hypotension, abdominal pain and diarrhoea to life-threatening anaphylactic and asthmatic reactions. Exposure to the sulphites arises mainly from the consumption of foods and drinks that contain these additives; however exposure may also occur through the use of pharmaceutical products, as well as in occupational settings. Most studies report a prevalence of sulphite sensitivity of 3 to 10% among asthmatic subjects who ingest these additives. However, the severity of these reactions varies, and steroid-dependent asthmatics, those with marked airway hyperresponsiveness, and children with chronic asthma, appear to be at greater risk. Although a number of potential mechanisms have been proposed, the precise mechanisms underlying sulphite sensitivity remain unclear. PMID:24834193

  20. Gluten Sensitivity.

    PubMed

    Catassi, Carlo

    2015-01-01

    Non-celiac gluten sensitivity (NCGS) is a syndrome characterized by intestinal and extraintestinal symptoms related to the ingestion of gluten-containing food in subjects who are not affected by either celiac disease (CD) or wheat allergy (WA). The prevalence of NCGS is not clearly defined yet. Indirect evidence suggests that NCGS is slightly more common than CD, the latter affecting around 1% of the general population. NCGS has been mostly described in adults, particularly in females in the age group of 30-50 years; however, pediatric case series have also been reported. Since NCGS may be transient, gluten tolerance needs to be reassessed over time in patients with NCGS. NCGS is characterized by symptoms that usually occur soon after gluten ingestion, disappear with gluten withdrawal, and relapse following gluten challenge within hours/days. The 'classical' presentation of NCGS is a combination of irritable bowel syndrome-like symptoms, including abdominal pain, bloating, bowel habit abnormalities (either diarrhea or constipation), and systemic manifestations such as 'foggy mind', headache, fatigue, joint and muscle pain, leg or arm numbness, dermatitis (eczema or skin rash), depression, and anemia. In recent years, several studies explored the relationship between the ingestion of gluten-containing food and the appearance of neurological and psychiatric disorders/symptoms like ataxia, peripheral neuropathy, schizophrenia, autism, depression, anxiety, and hallucinations (so-called gluten psychosis). The diagnosis of NCGS should be considered in patients with persistent intestinal and/or extraintestinal complaints showing a normal result of the CD and WA serological markers on a gluten-containing diet, usually reporting worsening of symptoms after eating gluten-rich food. NCGS should not be an exclusion diagnosis only. Unfortunately, no biomarker is sensitive and specific enough for diagnostic purposes; therefore, the diagnosis of NCGS is currently based on

  1. Tactile Sensitivity in Asperger Syndrome

    ERIC Educational Resources Information Center

    Blakemore, Sarah-Jayne; Tavassoli, Teresa; Calo, Susana; Thomas, Richard M.; Catmur, Caroline; Frith, Uta; Haggard, Patrick

    2006-01-01

    People with autism and Asperger syndrome are anecdotally said to be hypersensitive to touch. In two experiments, we measured tactile thresholds and suprathreshold tactile sensitivity in a group of adults with Asperger syndrome. In the first experiment, tactile perceptual thresholds were measured. Two frequencies of vibrotactile stimulation were…

  2. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  3. New perspectives in gaze sensitivity research.

    PubMed

    Davidson, Gabrielle L; Clayton, Nicola S

    2016-03-01

    Attending to where others are looking is thought to be of great adaptive benefit for animals when avoiding predators and interacting with group members. Many animals have been reported to respond to the gaze of others, by co-orienting their gaze with group members (gaze following) and/or responding fearfully to the gaze of predators or competitors (i.e., gaze aversion). Much of the literature has focused on the cognitive underpinnings of gaze sensitivity, namely whether animals have an understanding of the attention and visual perspectives in others. Yet there remain several unanswered questions regarding how animals learn to follow or avoid gaze and how experience may influence their behavioral responses. Many studies on the ontogeny of gaze sensitivity have shed light on how and when gaze abilities emerge and change across development, indicating the necessity to explore gaze sensitivity when animals are exposed to additional information from their environment as adults. Gaze aversion may be dependent upon experience and proximity to different predator types, other cues of predation risk, and the salience of gaze cues. Gaze following in the context of information transfer within social groups may also be dependent upon experience with group-members; therefore we propose novel means to explore the degree to which animals respond to gaze in a flexible manner, namely by inhibiting or enhancing gaze following responses. We hope this review will stimulate gaze sensitivity research to expand beyond the narrow scope of investigating underlying cognitive mechanisms, and to explore how gaze cues may function to communicate information other than attention. PMID:26582567

  4. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  5. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  6. A basic Michelson laser interferometer for the undergraduate teaching laboratory demonstrating picometer sensitivity

    NASA Astrophysics Data System (ADS)

    Libbrecht, Kenneth G.; Black, Eric D.

    2015-05-01

    We describe a basic Michelson laser interferometer experiment for the undergraduate teaching laboratory that achieves picometer sensitivity in a hands-on, table-top instrument. In addition to providing an introduction to interferometer physics and optical hardware, the experiment also focuses on precision measurement techniques including servo control, signal modulation, phase-sensitive detection, and different types of signal averaging. Students examine these techniques in a series of steps that take them from micron-scale sensitivity using direct fringe counting to picometer sensitivity using a modulated signal and phase-sensitive signal averaging. After students assemble, align, and characterize the interferometer, they then use it to measure nanoscale motions of a simple harmonic oscillator system as a substantive example of how laser interferometry can be used as an effective tool in experimental science.

  7. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate. PMID:3302664

  8. Tuberculin sensitivity.

    PubMed

    Eason, R J

    1987-06-01

    A prospective study of tuberculin sensitivity has been conducted among 3610 subjects under 20 years old in the Solomon Islands, Western Province. Mantoux positivity (greater than or equal to mm induration after 5 TU) fell from 81% during the 6 months following birth BCG vaccination to 13% for children aged 1-8 years of age among whom it was not significantly higher than the rate of 9% noted for unvaccinated subjects. Birth BCG does not, therefore, hinder the diagnostic usefulness of tuberculin testing for such children. For the study population as a whole, BCG-induced Mantoux positivity was restricted to induration under 15 mm diameter. Stronger responses were considered specific for tuberculin infection and indicated a prevalence rate that rose from 2% to 16% with age. Accelerated BCG reactions recorded among 45% of 162 tuberculin non-reactors under 8 years old indicated that the waning of tuberculin responsiveness at this time could not be equated with loss of clinical protection against tuberculosis. PMID:2441657

  9. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  10. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  11. Boron addition to alloys

    SciTech Connect

    Coad, B. C.

    1985-08-20

    A process for addition of boron to an alloy which involves forming a melt of the alloy and a reactive metal, selected from the group consisting of aluminum, titanium, zirconium and mixtures thereof to the melt, maintaining the resulting reactive mixture in the molten state and reacting the boric oxide with the reactive metal to convert at least a portion of the boric oxide to boron which dissolves in the resulting melt, and to convert at least portion of the reactive metal to the reactive metal oxide, which oxide remains with the resulting melt, and pouring the resulting melt into a gas stream to form a first atomized powder which is subsequently remelted with further addition of boric oxide, re-atomized, and thus reprocessed to convert essentially all the reactive metal to metal oxide to produce a powdered alloy containing specified amounts of boron.

  12. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  13. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  14. [Biologically active food additives].

    PubMed

    Velichko, M A; Shevchenko, V P

    1998-07-01

    More than half out of 40 projects for the medical science development by the year of 2000 have been connected with the bio-active edible additives that are called "the food of XXI century", non-pharmacological means for many diseases. Most of these additives--nutricevtics and parapharmacevtics--are intended for the enrichment of food rations for the sick or healthy people. The ecologicaly safest and most effective are combined domestic adaptogens with immuno-modulating and antioxidating action that give anabolic and stimulating effect,--"leveton", "phytoton" and "adapton". The MKTs-229 tablets are residue discharge means. For atherosclerosis and general adiposis they recommend "tsar tablets" and "aiconol (ikhtien)"--on the base of cod-liver oil or "splat" made out of seaweed (algae). All these preparations have been clinically tested and received hygiene certificates from the Institute of Dietology of the Russian Academy of Medical Science. PMID:9752776

  15. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  16. Hydrocarbon fuel additive

    SciTech Connect

    Ambrogio, S.

    1989-02-28

    This patent describes the method of fuel storage or combustion, wherein the fuel supply contains small amounts of water, the step of adding to the fuel supply an additive comprising a blend of a hydrophilic agent chosen from the group of ethylene glycol, n-butyl alcohol, and cellosolve in the range of 22-37% by weight; ethoxylated nonylphenol in the range of 26-35% by weight; nonylphenol polyethylene glycol ether in the range of 32-43% by weight.

  17. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  18. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  19. Capacitive Proximity Sensors With Additional Driven Shields

    NASA Technical Reports Server (NTRS)

    Mcconnell, Robert L.

    1993-01-01

    Improved capacitive proximity sensors constructed by incorporating one or more additional driven shield(s). Sensitivity and range of sensor altered by adjusting driving signal(s) applied to shield(s). Includes sensing electrode and driven isolating shield that correspond to sensing electrode and driven shield.

  20. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  1. Oil additive process

    SciTech Connect

    Bishop, H.

    1988-10-18

    This patent describes a method of making an additive comprising: (a) adding 2 parts by volume of 3% sodium hypochlorite to 45 parts by volume of diesel oil fuel to form a sulphur free fuel, (b) removing all water and foreign matter formed by the sodium hypochlorite, (c) blending 30 parts by volume of 24% lead naphthanate with 15 parts by volume of the sulphur free fuel, 15 parts by volume of light-weight material oil to form a blended mixture, and (d) heating the blended mixture slowly and uniformly to 152F.

  2. The Additive Coloration of Alkali Halides

    ERIC Educational Resources Information Center

    Jirgal, G. H.; and others

    1969-01-01

    Describes the construction and use of an inexpensive, vacuum furnace designed to produce F-centers in alkali halide crystals by additive coloration. The method described avoids corrosion or contamination during the coloration process. Examination of the resultant crystals is discussed and several experiments using additively colored crystals are…

  3. Peripheral contrast sensitivity and attention in myopia.

    PubMed

    Kerber, Kristen L; Thorn, Frank; Bex, Peter J; Vera-Diaz, Fuensanta A

    2016-08-01

    Disruption of normal visual experience or changes in the normal interaction between central and peripheral retinal input may lead to the development of myopia. In order to examine the relationship between peripheral contrast sensitivity and myopia, we manipulated attentional load for foveal vision in emmetropes and myopes while observers detected targets with peripheral vision. Peripheral contrast detection thresholds were measured binocularly using vertical Gabor stimuli presented at three eccentricities (±8°, 17°, 30°) in a spatial 2 alternative forced choice task. Contrast thresholds were measured in young adult (mean age 24.5±2.6years) emmetropes (n=17; group SE: +0.19±0.32D) and myopes (n=25; group SE: -3.74±1.99D). Attention at central fixation was manipulated with: (1) a low attention task, requiring simple fixation; or (2) a high attention task, which required subjects to perform a mathematical task. We found that at 30° all subjects exhibited lower contrast sensitivity (higher thresholds). In addition, myopes (Wilcoxon, p<0.01), but not emmetropes (Wilcoxon, p=0.1), had a significant decrease in sensitivity at 30° during the high attention task. However, the attention dependent threshold increase for myopes was not significantly greater than for emmetropes (Wilcoxon, p=0.27). Attentional load did not increase thresholds at 8° or 17° for either refractive group. These data indicate that myopes experience a greater decrease in contrast sensitivity in the far periphery than emmetropes when attention is deployed in central vision. PMID:27264028

  4. Evaluating additives and impurities in zinc electrowinning

    NASA Astrophysics Data System (ADS)

    Gonzalez-Dominguez, J. A.; Lew, R. W.

    1995-01-01

    The zinc electrowinning (EW) process is very sensitive to the presence of impurities. There is only one EW plant in the world that we know of that operates at moderate current efficiency and deposition times without using any additives. All the others must use them continuously. Additives allow zinc EW to occur at high current efficiencies while suppressing excessive acid mist formation. The study of the electrochemical effects of additives in zinc EW is not straightforward. This article presents a review of the experimental techniques currently used at Cominco Research: Cyclic voltammetry, Hull cells, laboratory and mini-cell electrowinning techniques are all described and their relationship to the industrial operation is discussed.

  5. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  6. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  7. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  8. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  9. The Southeast Asia Regional Climate Downscaling (SEACLID) / CORDEX Southeast Asia Project and The Results of Its Sensitivity Experiments of RegCM4 Cumulus and Ocean Fluxes Parameterization Schemes on Temperature and Extremes.

    NASA Astrophysics Data System (ADS)

    Tangang, Fredolin; Juneng, Liew; Cruz, Faye; Narisma, Gemma; Dado, Julie; Van, Tan-Phan; Ngo-Duc, Thanh; Trinh-Tuan, Long; Nguyen-Xuan, Thanh; Santisirisomboon, Jerasorn; Singhruck, Patama; Gunawan, Dodo; Aldrian, Edvin

    2015-04-01

    The Southeast Asia (SEA) region is one of the more vulnerable regions to the impacts of climate change because of the large population exposed to climate-related hazards, mostly living in countries with low adaptive capabilities. In order to adequately prepare and adapt to these future climate change impacts, it is therefore crucial for high-resolution climate projections to be available for this region. The Southeast Asia Regional Climate Downscaling/CORDEX Southeast Asia (SEACLID/CORDEX-SEA) project aims to provide these projections through a collaborative effort in regional climate downscaling. As a first step, model simulations with the 4th version of Regional Climate Model system (RegCM4) developed by International Centre for Theoretical Physics (ICTP) were performed for the SEA domain (80°E-145°E; 15°S-40°N) at 36 km spatial resolution, to determine an optimal configuration of the model for the region. Using the ECMWF ERA Interim data as boundary condition, a total of 18 sensitivity experiments were done with different cumulus parameterization and ocean flux schemes for the period of 1989-2008. In this study, the model's performance in simulating mean temperature is evaluated against APHRODITE, a gridded observed temperature dataset. Initial results showed that RegCM4 tends to enhance the cold bias from the boundary forcing. There is also a consistent cold bias among all simulations over the Tibetan plateau and Indochina, especially during the boreal winter. Consequently, simulations had the smallest biases during boreal summer. The correlation of the model with the observed data is high over the northern half of the region, in contrast with the low correlation over the southern half, which may be due to uncertainties in the APHRODITE dataset over this region. Consistent with the spatial analysis, the analysis of the regional means indicates an overall better performance of the MIT Emanuel scheme, in terms of seasonality and spatial distribution. The

  10. XMASS experiment

    NASA Astrophysics Data System (ADS)

    Abe, Ko

    2016-06-01

    XMASS is a single phase liquid xenon scintillator detector. The project is designed for multi purposes, dark matter, neutrinoless double beta decay and 7Be/pp solar neutrino. As the first step of project, XMASS-I detector with 832kg sensitive volume started operation from Dec. 2010. In this paper, recent obtained physics results from commissioning data, refurbishment of detector and future step of experiment are presented.

  11. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  12. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  13. Gas Chromatographic Detectors for Exobiology Flight Experiments

    NASA Technical Reports Server (NTRS)

    Kojiro, Daniel R.; Humphry, Donald E.; Takeuchi, Nori; Chang, Sherwood (Technical Monitor)

    1997-01-01

    Exobiology flight experiments require highly sensitive instrumentation for in situ chemical analysis of the volatile chemical species that occur in the atmospheres and surfaces of various bodies within the solar system. The complex mixtures encountered place a heavy burden on the analytical instrumentation to detect and identify all species present. Future missions to Mars', comets, or planetary moons such as Europa, will perform experiments with complex analyses. In addition, instrumentation for such missions must perform under severely restricted conditions with limited resources. To meet these analytical requirements, improved methods and highly sensitive yet smaller instruments must continually be developed with increasingly greater capabilities. We describe here efforts to achieve this objective, for past and future missions, through the development of new or the improvement of existing sensitive, miniaturized gas chromatographic detectors.

  14. Calibration Monitor for Dark Energy Experiments

    SciTech Connect

    Kaiser, M. E.

    2009-11-23

    The goal of this program was to design, build, test, and characterize a flight qualified calibration source and monitor for a Dark Energy related experiment: ACCESS - 'Absolute Color Calibration Experiment for Standard Stars'. This calibration source, the On-board Calibration Monitor (OCM), is a key component of our ACCESS spectrophotometric calibration program. The OCM will be flown as part of the ACCESS sub-orbital rocket payload in addition to monitoring instrument sensitivity on the ground. The objective of the OCM is to minimize systematic errors associated with any potential changes in the ACCESS instrument sensitivity. Importantly, the OCM will be used to monitor instrument sensitivity immediately after astronomical observations while the instrument payload is parachuting to the ground. Through monitoring, we can detect, track, characterize, and thus correct for any changes in instrument senstivity over the proposed 5-year duration of the assembled and calibrated instrument.

  15. Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions.

    PubMed

    Shimizu, Yuki; Tan, Siew Leng; Murata, Dai; Maruyama, Taiji; Ito, So; Chen, Yuan-Liu; Gao, Wei

    2016-02-01

    An ultra-sensitive angle sensor employing single-cell photodiodes, which allows tighter focusing leading to a higher angular resolution better than 0.001 arc-second, has been designed based on laser autocollimation. Aiming to investigate the influences of spherical aberrations in the optical system on the sensor sensitivity, an optical model has been established based on wave optics. Computer simulation has been carried out by using the model, and its feasibility has been verified in experiments. In addition, a prototype optical angle sensor has been designed in a compact size of 100 mm × 150 mm, and its measurement resolution has been verified in experiments. PMID:26906848

  16. Stored color-form knowledge modulates perceptual sensitivity in search.

    PubMed

    Wildegger, Theresa; Riddoch, Jane; Humphreys, Glyn W

    2015-05-01

    We used signal detection analysis to examine the effects of stored color-form knowledge on visual search. Across four experiments, we showed robust effects of stored color-form knowledge on perceptual sensitivity, whereas the effects on response criteria varied. The effects on perceptual sensitivity were stronger when multiple items were present and when the color fell on the surface of the object. The benefit was found even when the correctly colored target had a low probability of occurrence in the experiment. In addition, the benefit was present across different display sizes, and the effects of increasing the exposure duration on detecting correctly colored targets were equal across different sizes of the display. The data suggest that color-form conjunctions are detected efficiently to activate stored color-form knowledge, and that this knowledge then influences early perceptual processing in a bottom-up manner. We discuss the implications for understanding the coding of conjunctive relations. PMID:25772101

  17. Design and implementation of a context-sensitive, flow-sensitive activity analysis algorithm for automatic differentiation.

    SciTech Connect

    Shin, J.; Malusare, P.; Hovland, P. D.; Mathematics and Computer Science

    2008-01-01

    Automatic differentiation (AD) has been expanding its role in scientific computing. While several AD tools have been actively developed and used, a wide range of problems remain to be solved. Activity analysis allows AD tools to generate derivative code for fewer variables, leading to a faster run time of the output code. This paper describes a new context-sensitive, flow-sensitive (CSFS) activity analysis, which is developed by extending an existing context-sensitive, flow-insensitive (CSFI) activity analysis. Our experiments with eight benchmarks show that the new CSFS activity analysis is more than 27 times slower but reduces 8 overestimations for the MIT General Circulation Model (MITgcm) and 1 for an ODE solver (c2) compared with the existing CSFI activity analysis implementation. Although the number of reduced overestimations looks small, the additionally identified passive variables may significantly reduce tedious human effort in maintaining a large code base such as MITgcm.

  18. Efficient sensitivity analysis method for chaotic dynamical systems

    NASA Astrophysics Data System (ADS)

    Liao, Haitao

    2016-05-01

    The direct differentiation and improved least squares shadowing methods are both developed for accurately and efficiently calculating the sensitivity coefficients of time averaged quantities for chaotic dynamical systems. The key idea is to recast the time averaged integration term in the form of differential equation before applying the sensitivity analysis method. An additional constraint-based equation which forms the augmented equations of motion is proposed to calculate the time averaged integration variable and the sensitivity coefficients are obtained as a result of solving the augmented differential equations. The application of the least squares shadowing formulation to the augmented equations results in an explicit expression for the sensitivity coefficient which is dependent on the final state of the Lagrange multipliers. The LU factorization technique to calculate the Lagrange multipliers leads to a better performance for the convergence problem and the computational expense. Numerical experiments on a set of problems selected from the literature are presented to illustrate the developed methods. The numerical results demonstrate the correctness and effectiveness of the present approaches and some short impulsive sensitivity coefficients are observed by using the direct differentiation sensitivity analysis method.

  19. Sensitivity Analysis in Engineering

    NASA Technical Reports Server (NTRS)

    Adelman, Howard M. (Compiler); Haftka, Raphael T. (Compiler)

    1987-01-01

    The symposium proceedings presented focused primarily on sensitivity analysis of structural response. However, the first session, entitled, General and Multidisciplinary Sensitivity, focused on areas such as physics, chemistry, controls, and aerodynamics. The other four sessions were concerned with the sensitivity of structural systems modeled by finite elements. Session 2 dealt with Static Sensitivity Analysis and Applications; Session 3 with Eigenproblem Sensitivity Methods; Session 4 with Transient Sensitivity Analysis; and Session 5 with Shape Sensitivity Analysis.

  20. Chemical feedbacks in climate sensitivity studies

    NASA Astrophysics Data System (ADS)

    Dietmüller, Simone; Ponater, Michael; Sausen, Robert

    2013-04-01

    Interactively coupled climate chemistry models extend the number of feedback mechanisms in climate change simulations by allowing a variation of several radiatively actice chemical tracers that are prescribed in conventional climate models. Different perturbation experiments including chemical feedbacks were performed using the chemistry-climate model system EMAC coupled to the mixed layer ocean model MLO. The influence of the chemical feedbacks O3, CH4 and N2O on climate response and climate sensitivity is quantified for a series of CO2-perturbation simulations: Equilibrium climate sensitivity is dampened, if chemical feedbacks are included. In case of a CO2 doubling simulation chemical feedbacks decrease climate sensitivity by -3.6% and in case of a 4*CO2 simulation by -8.1%. Analysis of the chemical feedbacks reveals, that the negative feedback of ozone, mainly the feedback of stratospheric ozone, is responsible for this dampening. The radiative feedbacks of CH4 and N2O are negligible, mainly because the model system does not allow interactive emission feedbacks at the Earth's surface for these gases. The feedback of physical parameters is significantly modified by the presence of chemical feedbacks. In case of the CO2-perturbation experiments the negative stratospheric ozone feedback is accompanied by a negative stratospheric H2O feedback change of the same order of magnitude. So the dampening effect of the direct O3 radiative feedback is enhanced. A non-linearity in the damping is found with increasing CO2 concentrations. Reasons are the nonlinear feedbacks of ozone, temperature, and stratospheric water vapor. Additional 6*CO2 simulations with and without chemical feedbacks included show, that the presence of chemic feedbacks helps to prevent a runaway greenhouse effect, as the O3 distribution can react to the upward shift of the tropopause. Also experiments driven by anthropogenic NOx- and CO-emissions were performed, where chemically active trace gases act

  1. Sensitivity of the ECC ozonesondes response to solution concentration

    NASA Astrophysics Data System (ADS)

    Stübi, R.; Levrat, G.; Viatte, P.

    2003-04-01

    The Electrochemical Concentration Cell (ECC) ozonesondes are commonly used to measure the ozone profiles during the aerological balloon ascents. Various experiments showed that the response of the ECC sondes are sensitive to a few factors like sensing solution concentration, supplier and preparation procedures. This sensitivity represents an important issue in case of comparison between stations or when a specific station changes its procedure. The simulator experiments during JOSIE campaigns have produced clear indications of those effects which have to be confirmed in atmospheric conditions. At the Payerne aerological station, a weekly dual ECC flight program is running since September 2002 in order to measure the difference between the 0.5% and 1% KI concentration solution for ENSCI sondes. Preliminary results of the first half of this one year program will be presented. The systematic difference profiles will be shown as well as the comparison of the ozone total ozone columns evaluated from the ballon soundings and the measurements of a Dobson spectrophotometer. In addition, laboratory experiments with different concentrations ranging from 0.1% to 2% KI buffered solutions have been conducted. Regular calibration of the sondes are performed with a UV photometer reference to evidence concentration sensitivity of the ECC sondes response in laboratory conditions and possible aging effect. These experiments should help to finalize Standard Operating Procedure (SOP) which are still to be set up by the ECC users community.

  2. High-Sensitivity Microwave Optics.

    ERIC Educational Resources Information Center

    Nunn, W. M., Jr.

    1981-01-01

    Describes a 3.33-cm wavelength (9 GHz) microwave system that achieves a high overall signal sensitivity and a well-collimated beam with moderate-size equipment. The system has been used to develop microwave versions of the Michelson interferometer, Bragg reflector, Brewster's law and total internal reflection, and Young's interference experiment.…

  3. Copper sensitivity of Oregon coastal phytoplankton

    SciTech Connect

    Riedel, G.F.

    1983-01-01

    The copper sensitivity of natural populations of Oregon coastal phytoplankton was studied using both additions of ionic copper and Cu-TRIS free ion activity buffers in coastal seawater. Phytoplankton growth rate, taxonomic composition and copper content were examined in treatment additions. The growth rate results suggested that the deficiency of another trace metal increased the apparent toxicity of copper to phytoplankton, especially in TRIS-free ion activity buffered seawater. Laboratory experiments with isolated coastal phytoplankton species indicated that manganese deficiency exacerbated copper toxicity, and that manganese deficiency was induced in TRIS buffered seawater by a TRIS-catalyzed oxidation of Mn. When manganese additions to natural populations were employed inconjunction with ionic copper additions and TRIS-free ion regulated seawater, they showed that ambient manganese concentrations were low enough to shift the onset of copper toxicity to lower copper concentrations. The results suggest that while acute toxicity to phytoplankton by ambient concentrations of copper is unlikely, the interactions of copper and other metals, especially manganese, may influence natural coastal phytoplankton populations in more subtle ways, such as taxonomic composition.

  4. Phase-sensitive flow cytometer

    SciTech Connect

    Steinkamp, J.A.

    1992-12-31

    This report describes phase-sensitive flow cytometer (FCM) which provides additional FCM capability to use the fluorescence lifetime of one or more fluorochromes bound to single cells to provide additional information regarding the cells. The resulting fluorescence emission can be resolved into individual fluorescence signals if two fluorochromes are present or can be converted directly to a decay lifetime from a single fluorochrome. The excitation light for the fluorochromes is modulated to produce an amplitude modulated fluorescence pulse as the fluorochrome is excited in the FCM. The modulation signal also forms a reference signal that is phase-shifted a selected amount for subsequent mixing with the output modulated fluorescence intensity signal in phase-sensitive detection circuitry. The output from the phase-sensitive circuitry is then an individual resolved fluorochrome signal or a single fluorochrome decay lifetime, depending on the applied phase shifts.

  5. Phase-sensitive flow cytometer

    DOEpatents

    Steinkamp, John A.

    1993-01-01

    A phase-sensitive flow cytometer (FCM) provides additional FCM capability to use the fluorescence lifetime of one or more fluorochromes bound to single cells to provide additional information regarding the cells. The resulting fluorescence emission can be resolved into individual fluorescence signals if two fluorochromes are present or can be converted directly to a decay lifetime from a single fluorochrome. The excitation light for the fluorochromes is modulated to produce an amplitude modulated fluorescence pulse as the fluorochrome is excited in the FCM. The modulation signal also forms a reference signal that is phase-shifted a selected amount for subsequent mixing with the output modulated fluorescence intensity signal in phase-sensitive detection circuitry. The output from the phase-sensitive circuitry is then an individual resolved fluorochrome signal or a single fluorochrome decay lifetime, depending on the applied phase shifts.

  6. Phase-sensitive flow cytometer

    DOEpatents

    Steinkamp, J.A.

    1993-12-14

    A phase-sensitive flow cytometer (FCM) provides additional FCM capability to use the fluorescence lifetime of one or more fluorochromes bound to single cells to provide additional information regarding the cells. The resulting fluorescence emission can be resolved into individual fluorescence signals if two fluorochromes are present or can be converted directly to a decay lifetime from a single fluorochrome. The excitation light for the fluorochromes is modulated to produce an amplitude modulated fluorescence pulse as the fluorochrome is excited in the FCM. The modulation signal also forms a reference signal that is phase-shifted a selected amount for subsequent mixing with the output modulated fluorescence intensity signal in phase-sensitive detection circuitry. The output from the phase-sensitive circuitry is then an individual resolved fluorochrome signal or a single fluorochrome decay lifetime, depending on the applied phase shifts. 15 figures.

  7. Measuring contrast sensitivity

    PubMed Central

    Pelli, Denis G.; Bex, Peter

    2013-01-01

    Contrast sensitivity defines the threshold between the visible and invisible, which has obvious significance for basic and clinical vision science. Fechner's 1860 review reported that threshold contrast is 1% for a remarkably wide range of targets and conditions. While printed charts are still in use, computer testing is becoming more popular because it offers efficient adaptive measurement of threshold for a wide range of stimuli. Both basic and clinical studies usually want to know fundamental visual capability, regardless of the observer's subjective criterion. Criterion effects are minimized by the use of an objective task: multiple-alternative forced-choice detection or identification. Having many alternatives reduces the guessing rate, which makes each trial more informative, so fewer trials are needed. Finally, populations who may experience crowding or target confusion should be tested with one target at a time. PMID:23643905

  8. Recent developments in structural sensitivity analysis

    NASA Technical Reports Server (NTRS)

    Haftka, Raphael T.; Adelman, Howard M.

    1988-01-01

    Recent developments are reviewed in two major areas of structural sensitivity analysis: sensitivity of static and transient response; and sensitivity of vibration and buckling eigenproblems. Recent developments from the standpoint of computational cost, accuracy, and ease of implementation are presented. In the area of static response, current interest is focused on sensitivity to shape variation and sensitivity of nonlinear response. Two general approaches are used for computing sensitivities: differentiation of the continuum equations followed by discretization, and the reverse approach of discretization followed by differentiation. It is shown that the choice of methods has important accuracy and implementation implications. In the area of eigenproblem sensitivity, there is a great deal of interest and significant progress in sensitivity of problems with repeated eigenvalues. In addition to reviewing recent contributions in this area, the paper raises the issue of differentiability and continuity associated with the occurrence of repeated eigenvalues.

  9. Simulating heat addition via mass addition in constant area compressible flows

    NASA Astrophysics Data System (ADS)

    Heiser, W. H.; McClure, W. B.; Wood, C. W.

    1995-01-01

    A study conducted demonstrated the striking similarity between the influence of heat addition and mass addition on compressible flows. These results encourage the belief that relatively modest laboratory experiments employing mass addition can be devised that will reproduce the leading phenomena of heat addition, such as the axial variation of properties, choking, and wall-boundary-layer separation. These suggest that some aspects of the complex behavior of dual-mode ramjet/scramjet combustors could be experimentally evaluated or demonstrated by replacing combustion with less expensive, more easily controlled, and safer mass addition.

  10. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  11. Preloadable vector sensitive latch

    NASA Technical Reports Server (NTRS)

    Acres, William R. (Inventor)

    1987-01-01

    A preloadable vector-sensitive latch which automatically releases when the force vector from a latch memebr reaches a specified release angle is presented. In addition, it contains means to remove clearance between the latched members and to preload the latch to prevent separation at angles less than the specified release angle. The latch comprises a triangular main link, a free link connected between a first corner of the main link and a yoke member, a housing, and an actuator connected between the yoke member and the housing. A return spring bias means connects the main link to a portion of the housing. A second corner of the main link is slidably and pivotally connected to the housing via a slot in a web portion of the housing. The latch housing has a rigid docking ring alignable with a mating locking ring which is engageable by a locking roller journalled on the third corner of the triangular main link.

  12. The QUIJOTE experiment

    NASA Astrophysics Data System (ADS)

    López-Caniego, Marcos

    2015-08-01

    The QUIJOTE (Q-U-I JOint Tenerife) CMB Experiment is observing the polarization of the Cosmic Microwave Background and other Galactic and extragalactic signals at medium and large angular scales in the frequency range of 10-40 GHz. This experiment will provide valuable information about the polarization properties of synchrotron and anomalous microwave emission at these frequencies. The maps obtained with the multi-frequency instrument (10-20 GHz), in combination with data from other experiments like Planck and the VLA, will be used to clean the diffuse and compact foreground emission at 30 and 40 GHz, the cosmological channels. After three years of effective observations we expect to reach the required sensitivity to detect a primordial gravitational-wave component if the tensor-to-scalar ratio is larger than r = 0.05. At the moment we have completed the Wide Survey with the multi-frequency instrument, covering 20.000 square degrees of the Northern hemisphere. In addition, we have deep integrations of our main calibrators Taurus A, Cassiopea A, Jupiter and of the Perseus molecular complex region, where we have measured the spectrum of the anomalous microwave emission. We also have observed several regions of interest for our science program where we plan to study the compact and diffuse polarized emission.

  13. Reinforcement Sensitivity Underlying Treatment-Seeking Smokers’ Affect, Smoking Reinforcement Motives, and Affective Responses

    PubMed Central

    Cui, Yong; Robinson, Jason D.; Engelmann, Jeffrey M.; Lam, Cho Y.; Minnix, Jennifer A.; Karam-Hage, Maher; Wetter, David W.; Dani, John A.; Kosten, Thomas R.; Cinciripini, Paul M.

    2014-01-01

    Nicotine dependence has been suggested to be related to reinforcement sensitivity, which encompasses behavioral predispositions either to avoid aversive (behavioral inhibition) or to approach appetitive (behavioral activation) stimuli. Reinforcement sensitivity may shape motives for nicotine use and offer potential targets for personalized smoking cessation therapy. However, little is known regarding how reinforcement sensitivity is related to motivational processes implicated in the maintenance of smoking. Additionally, women and men differ in reinforcement sensitivity, and such difference may cause distinct relationships between reinforcement sensitivity and motivational processes for female and male smokers. In this study, we characterized reinforcement sensitivity in relation to affect, smoking-related reinforcement motives, and affective responses, using self-report and psychophysiological measures, in over 200 smokers before treating them. The Behavioral Inhibition/Activation Scales (BIS/BAS; Carver & White, 1994) was used to measure reinforcement sensitivity. In female and male smokers, BIS was similarly associated with negative affect and negative reinforcement of smoking. But positive affect was positively associated with BAS Drive scores in male smokers, and this association was reversed in female smokers. BIS was positively associated with corrugator electromyographic reactivity towards negative stimuli and left frontal electroencephalogram alpha asymmetry. Female and male smokers showed similar relationships for these physiological measures. These findings suggest that reinforcement sensitivity underpins important motivational processes (e.g., affect), and gender is a moderating factor for these relationships. Future personalized smoking intervention, particularly among more dependent treatment-seeking smokers, may experiment to target individual differences in reinforcement sensitivity. PMID:25621416

  14. Priming Addition Facts with Semantic Relations

    ERIC Educational Resources Information Center

    Bassok, Miriam; Pedigo, Samuel F.; Oskarsson, An T.

    2008-01-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations…

  15. Noise and mental performance: personality attributes and noise sensitivity.

    PubMed

    Belojevic, G; Jakovljevic, B; Slepcevic, V

    2003-01-01

    The contradictory and confusing results in noise research on humans may partly be due to individual differences between the subjects participating in different studies. This review is based on a twelve year research on the role of neuroticism, extroversion and subjective noise sensitivity during mental work in noisy environment. Neurotic persons might show enhanced "arousability" i.e. their arousal level increases more in stress. Additional unfavorable factors for neurotics are worrying and anxiety, which might prevent them coping successfully with noise, or some other stressors during mental performance. In numerous experiments introverts have showed higher sensitivity to noise during mental performance compared to extroverts, while extroverts often cope with a boring task even by requesting short periods of noise during performance. Correlation analyses have regularly revealed a highly significant negative relation between extroversion and noise annoyance during mental processing. Numerous studies have shown that people with high noise sensitivity may be prevented from achieving the same work results as other people in noisy environment, thus leading to psychosomatic, neurotic or other difficulties. Positive relation between noise annoyance and subjective noise sensitivity might be very strong. Our results have shown, after matching with the results of other relevant studies, that more stable personality, with extroversive tendencies and with a relatively lower subjective noise sensitivity measured with standard questionnaires, may be expected to better adapt to noise during mental performance, compared to people with opposite personality traits. PMID:14965455

  16. Sensitive, quantitative carbon-13 NMR spectra by mechanical sample translation

    NASA Astrophysics Data System (ADS)

    Donovan, Kevin J.; Allen, Mary; Martin, Rachel W.; Shaka, A. J.

    2009-04-01

    Collecting a truly quantitative carbon-13 spectrum is a time-consuming chore. Very long relaxation delays, required between transients to allow the z-magnetization, M z, of the spin with the longestT1 to return to the equilibrium value, M0, must precede each transient. These long delays also reduce sensitivity, as fewer transients per unit time can be acquired. In addition, sometimes T1 is not known to within even a factor of two: a conservative guess for the relaxation delay then leads to very low sensitivity. We demonstrate a fresh method to bypass these problems and collect quantitative carbon-13 spectra by swapping the sample volume after each acquisition with a different portion where the magnetization is already equilibrated to M0. Loading larger sample volumes of 10-20 mL into an unusually long (1520 mm) 5 mm OD. NMR tube and vertically sliding the tube between acquisitions accomplishes the swap. The relaxation delay can then be skipped altogether. The spectra are thus both quantitative, and far more sensitive. We demonstrate the moving tube technique on two small molecules (thymol and butylhydroxytoluene) and show good carbon-13 quantification. The gain in sensitivity can be as much as 10-fold for slowly-relaxing 13C resonances. These experiments show that quantitative, sensitive carbon-13 spectra are possible whenever sufficient sample volumes are available. The method is applicable to any slow-relaxing nuclear spin species, such as 29Si, 15N and other low-γ nuclei.

  17. Storage Ring EDM Experiments

    NASA Astrophysics Data System (ADS)

    Semertzidis, Yannis K.

    2016-04-01

    Dedicated storage ring electric dipole moment (EDM) methods show great promise advancing the sensitivity level by a couple orders of magnitude over currently planned hadronic EDM experiments. We describe the present status and recent updates of the field.

  18. Priming addition facts with semantic relations.

    PubMed

    Bassok, Miriam; Pedigo, Samuel F; Oskarsson, An T

    2008-03-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations between the priming words were either aligned or misaligned with the structure of addition (M. Bassok, V. M. Chase, & S. A. Martin, 1998). Obligatory activation of addition facts occurred when the digits were primed by categorically related words (tulips-daisies), which are aligned with addition, but did not occur when the digits were primed by unrelated words (hens-radios, Experiment 1) or by functionally related words (records-songs, Experiment 2), which are misaligned with addition. These findings lend support to the viability of automatic analogical priming (B. A. Spellman, K. J. Holyoak, & R. G. Morrison, 2001) and highlight the relevance of arithmetic applications to theoretical accounts of mental arithmetic. PMID:18315410

  19. Directional Sensitivity of the Human Ear.

    ERIC Educational Resources Information Center

    Pitt, John D.; Bazley, Martin

    1985-01-01

    Presents a classroom experiment that demonstrates the directional sensitivity of the human ear. Outlines the activity's procedures and provides a diagrammatical view of the experimental arrangement. Also included is an analysis of the expected results. (ML)

  20. Some More Sensitive Measures of Sensitivity and Response Bias

    NASA Technical Reports Server (NTRS)

    Balakrishnan, J. D.

    1998-01-01

    In this article, the author proposes a new pair of sensitivity and response bias indices and compares them to other measures currently available, including d' and Beta of signal detection theory. Unlike d' and Beta, these new performance measures do not depend on specific distributional assumptions or assumptions about the transformation from stimulus information to a discrimination judgment with simulated and empirical data, the new sensitivity index is shown to be more accurate than d' and 16 other indices when these measures are used to compare the sensitivity levels of 2 experimental conditions. Results from a perceptual discrimination experiment demonstrate the feasibility of the new distribution-free bias index and suggest that biases of the type defined within the signal detection theory framework (i.e., the placement of a decision criterion) do not exist, even under an asymmetric payoff manipulation.

  1. Multiplicative and additive Adelson's snake illusions.

    PubMed

    Petrini, Karin

    2008-01-01

    Two different versions of Adelson's snake lightness illusion are quantitatively investigated. In one experiment an additive version of the illusion is investigated by varying the additive component of the atmosphere transfer function (ATF) introduced by Adelson [2000, in The New Cognitive Neuroscience Ed. M Gazzaniga (Cambridge, MA: MIT Press) pp 339-351]. In the other, a multiplicative version of the illusion is examined by varying the multiplicative component of the ATE In both experiments four observers matched the targets' lightness of the snake patterns with Munsell samples. Increasing the additive or the multiplicative component elicited an approximately equal increase in the magnitude of the lightness illusion. The results show that both components, in the absence of other kinds of information, can be used as heuristics by our visual system to anchor luminance of the object when converting it into lightness. PMID:19189728

  2. How Sensitively Timed Are Sensitive Periods?

    ERIC Educational Resources Information Center

    Zener, Rita Schaefer

    2003-01-01

    Reviews Maria Montessori's view of sensitive periods and examines the kinds of help needed from adults: an open mind, specific help from a prepared learning environment, and challenges presented at the right time. Stresses the universality of sensitive periods and their connection to brain development. Focuses on the unconscious nature and…

  3. Ringberg15: Earth's Climate Sensitivities

    NASA Technical Reports Server (NTRS)

    Stevens, Bjorn; Abe-Ouchi, Ayako; Bony, Sandrine; Hegerl, Gabi; Schmidt, Gavin; Sherwood, Steven; Webb, Mark

    2015-01-01

    To assess gaps in understanding of Earth's climate sensitivities a workshop was organised under the auspices of the WCRP (World Climate Research Programme) Grand Science Challenge on Clouds, Circulation and Climate Sensitivity (Ringberg15). The workshop took place in March 2015 and gathered together over thirty experts from around the world for one week. Attendees each gave short presentations and participated in moderated discussions of specific questions related to understanding Earth's climate sensitivities. Most of the time was focused on understanding of the equilibrium climate sensitivity, defined as the equilibrium near-surface warming associated with a doubling of atmospheric carbon dioxide. The workshop produced nine recommendations, many of them focusing on specific research avenues that could be exploited to advance understanding of climate sensitivity. Many of these dealt, in one fashion or another, with the need to more sharply focus research on identifying and testing story lines for a high (larger than 4 degrees Kelvin) or low (less than 2 degrees Kelvin) equilibrium climate sensitivity. Additionally, a subset of model intercomparison projects (CFMIP (Cloud Feedback Model Intercomparison Project), PMIP (Palaeoclimate Modelling Intercomparison Project), PDRMIP (Precipitation Driver and Response Model Intercomparison Project), RFMIP (Radiative Forcing Model Intercomparison Project) and VolMIP (Volcanic Forcings Model Intercomparison Project)) that have been proposed for inclusion within CMIP were identified as being central to resolving important issues raised at the workshop; for this reason modelling groups were strongly encouraged to participate in these projects. Finally the workshop participants encouraged the WCRP to initiate and support an assessment process lead by the Grand Science Challenge on Clouds, Circulation and Climate Sensitivity on the topic of Earth's Climate Sensitivities, culminating in a report that will be published in 2019

  4. Effects of Water and Nitrogen Addition on Ecosystem Carbon Exchange in a Meadow Steppe

    PubMed Central

    Wang, Yunbo; Jiang, Qi; Yang, Zhiming; Sun, Wei; Wang, Deli

    2015-01-01

    A changing precipitation regime and increasing nitrogen deposition are likely to have profound impacts on arid and semiarid ecosystem C cycling, which is often constrained by the timing and availability of water and nitrogen. However, little is known about the effects of altered precipitation and nitrogen addition on grassland ecosystem C exchange. We conducted a 3-year field experiment to assess the responses of vegetation composition, ecosystem productivity, and ecosystem C exchange to manipulative water and nitrogen addition in a meadow steppe. Nitrogen addition significantly stimulated aboveground biomass and net ecosystem CO2 exchange (NEE), which suggests that nitrogen availability is a primary limiting factor for ecosystem C cycling in the meadow steppe. Water addition had no significant impacts on either ecosystem C exchange or plant biomass, but ecosystem C fluxes showed a strong correlation with early growing season precipitation, rather than whole growing season precipitation, across the 3 experimental years. After we incorporated water addition into the calculation of precipitation regimes, we found that monthly average ecosystem C fluxes correlated more strongly with precipitation frequency than with precipitation amount. These results highlight the importance of precipitation distribution in regulating ecosystem C cycling. Overall, ecosystem C fluxes in the studied ecosystem are highly sensitive to nitrogen deposition, but less sensitive to increased precipitation. PMID:26010888

  5. Calibration Technique for Polarization-Sensitive Lidars

    NASA Technical Reports Server (NTRS)

    Alvarez, J. M.; Vaughan, M. A.; Hostetler, C. A.; Hung, W. H.; Winker, D. M.

    2006-01-01

    Polarization-sensitive lidars have proven to be highly effective in discriminating between spherical and non-spherical particles in the atmosphere. These lidars use a linearly polarized laser and are equipped with a receiver that can separately measure the components of the return signal polarized parallel and perpendicular to the outgoing beam. In this work we describe a technique for calibrating polarization-sensitive lidars that was originally developed at NASA s Langley Research Center (LaRC) and has been used continually over the past fifteen years. The procedure uses a rotatable half-wave plate inserted into the optical path of the lidar receiver to introduce controlled amounts of polarization cross-talk into a sequence of atmospheric backscatter measurements. Solving the resulting system of nonlinear equations generates the system calibration constants (gain ratio, G, and offset angle, theta) required for deriving calibrated measurements of depolarization ratio from the lidar signals. In addition, this procedure also determines the mean depolarization ratio within the region of the atmosphere that is analyzed. Simulations and error propagation studies show the method to be both reliable and well behaved. Operational details of the technique are illustrated using measurements obtained as part of Langley Research Center s participation in the First ISCCP Regional Experiment (FIRE).

  6. The DAMIC Dark Matter Experiment

    SciTech Connect

    de Mello Neto, J. R.T.

    2015-10-07

    The DAMIC (DArk Matter In CCDs) experiment uses high-resistivity, scientific-grade CCDs to search for dark matter. The CCD’s low electronic noise allows an unprecedently low energy threshold of a few tens of eV; this characteristic makes it possible to detect silicon recoils resulting from interactions of low-mass WIMPs. In addition, the CCD’s high spatial resolution and the excellent energy response results in very effective background identification techniques. The experiment has a unique sensitivity to dark matter particles with masses below 10 GeV/c2. Previous results have motivated the construction of DAMIC100, a 100 grams silicon target detector currently being installed at SNOLAB. The mode of operation and unique imaging capabilities of the CCDs, and how they may be exploited to characterize and suppress backgrounds are discussed, as well as physics results after one year of data taking.

  7. Uncertainty and Sensitivity Analyses Plan

    SciTech Connect

    Simpson, J.C.; Ramsdell, J.V. Jr.

    1993-04-01

    Hanford Environmental Dose Reconstruction (HEDR) Project staff are developing mathematical models to be used to estimate the radiation dose that individuals may have received as a result of emissions since 1944 from the US Department of Energy's (DOE) Hanford Site near Richland, Washington. An uncertainty and sensitivity analyses plan is essential to understand and interpret the predictions from these mathematical models. This is especially true in the case of the HEDR models where the values of many parameters are unknown. This plan gives a thorough documentation of the uncertainty and hierarchical sensitivity analysis methods recommended for use on all HEDR mathematical models. The documentation includes both technical definitions and examples. In addition, an extensive demonstration of the uncertainty and sensitivity analysis process is provided using actual results from the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC). This demonstration shows how the approaches used in the recommended plan can be adapted for all dose predictions in the HEDR Project.

  8. Multiple chemical sensitivity: a 1999 consensus.

    PubMed

    1999-01-01

    Consensus criteria for the definition of multiple chemical sensitivity (MCS) were first identified in a 1989 multidisciplinary survey of 89 clinicians and researchers with extensive experience in, but widely differing views of, MCS. A decade later, their top 5 consensus criteria (i.e., defining MCS as [1] a chronic condition [2] with symptoms that recur reproducibly [3] in response to low levels of exposure [4] to multiple unrelated chemicals and [5] improve or resolve when incitants are removed) are still unrefuted in published literature. Along with a 6th criterion that we now propose adding (i.e., requiring that symptoms occur in multiple organ systems), these criteria are all commonly encompassed by research definitions of MCS. Nonetheless, their standardized use in clinical settings is still lacking, long overdue, and greatly needed--especially in light of government studies in the United States, United Kingdom, and Canada that revealed 2-4 times as many cases of chemical sensitivity among Gulf War veterans than undeployed controls. In addition, state health department surveys of civilians in New Mexico and California showed that 2-6%, respectively, already had been diagnosed with MCS and that 16% of the civilians reported an "unusual sensitivity" to common everyday chemicals. Given this high prevalence, as well as the 1994 consensus of the American Lung Association, American Medical Association, U.S. Environmental Protection Agency, and the U.S. Consumer Product Safety Commission that "complaints [of MCS] should not be dismissed as psychogenic, and a thorough workup is essential," we recommend that MCS be formally diagnosed--in addition to any other disorders that may be present--in all cases in which the 6 aforementioned consensus criteria are met and no single other organic disorder (e.g., mastocytosis) can account for all the signs and symptoms associated with chemical exposure. The millions of civilians and tens of thousands of Gulf War veterans who

  9. Pharmacogenetics: detecting sensitive populations.

    PubMed Central

    Shields, P G

    1994-01-01

    Risk assessment models strive to predict risks to humans from toxic agents. Safety factors and assumptions are incorporated into these models to allow a margin of error. In the case of cancer, substantial evidence shows that the carcinogenic process is a multistage process driven by the interaction of exogenous carcinogenic exposures, genetic traits, and other endogenous factors. Current risk assessment models fail to consider genetic predispositions that make people more sensitive or resistant to exogenous exposures and endogenous processes. Several cytochrome P450 enzymes, responsible for metabolically activating carcinogens and medications, express wide interindividual variation whose genetic coding has now been identified as polymorphic and linked to cancer risk. For example, a restriction fragment-length polymorphism for cytochrome P4501A1, which metabolizes polycyclic aromatic hydrocarbons, and cytochrome P4502E1, which metabolizes N-nitrosamines and benzene, is linked to lung cancer risk. Cytochrome P4502D6, responsible for metabolizing many clinically important medications, also is linked to lung cancer risk. The frequency for each of these genetic polymorphisms vary among different ethnic and racial groups. In addition to inherited factors for the detection of sensitive populations, determining the biologically effective doses for carcinogenic exposures also should quantitatively and qualitatively enhance the risk assessment process. Levels of carcinogen-DNA adducts reflect the net effect of exposure, absorption, metabolic activation, detoxification, and DNA repair. These effects are genetically predetermined, inducibility notwithstanding. The combination of adduct and genotyping assays provide an assessment of risk that reflects recent exogenous exposure as well as one's lifetime ability to activate and detoxify carcinogens. PMID:7737047

  10. Experiment Databases

    NASA Astrophysics Data System (ADS)

    Vanschoren, Joaquin; Blockeel, Hendrik

    Next to running machine learning algorithms based on inductive queries, much can be learned by immediately querying the combined results of many prior studies. Indeed, all around the globe, thousands of machine learning experiments are being executed on a daily basis, generating a constant stream of empirical information on machine learning techniques. While the information contained in these experiments might have many uses beyond their original intent, results are typically described very concisely in papers and discarded afterwards. If we properly store and organize these results in central databases, they can be immediately reused for further analysis, thus boosting future research. In this chapter, we propose the use of experiment databases: databases designed to collect all the necessary details of these experiments, and to intelligently organize them in online repositories to enable fast and thorough analysis of a myriad of collected results. They constitute an additional, queriable source of empirical meta-data based on principled descriptions of algorithm executions, without reimplementing the algorithms in an inductive database. As such, they engender a very dynamic, collaborative approach to experimentation, in which experiments can be freely shared, linked together, and immediately reused by researchers all over the world. They can be set up for personal use, to share results within a lab or to create open, community-wide repositories. Here, we provide a high-level overview of their design, and use an existing experiment database to answer various interesting research questions about machine learning algorithms and to verify a number of recent studies.

  11. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  12. Deciphering the roles of multiple additives in organocatalyzed Michael additions.

    PubMed

    Günler, Z Inci; Companyó, Xavier; Alfonso, Ignacio; Burés, Jordi; Jimeno, Ciril; Pericàs, Miquel A

    2016-05-21

    The synergistic effects of multiple additives (water and acetic acid) on the asymmetric Michael addition of acetone to nitrostyrene catalyzed by primary amine-thioureas (PAT) were precisely determined. Acetic acid facilitates hydrolysis of the imine intermediates, thus leading to catalytic behavior, and minimizes the formation of the double addition side product. In contrast, water slows down the reaction but minimizes catalyst deactivation, eventually leading to higher final yields. PMID:27128165

  13. The sensitivity of orographic precipitation to flow direction: An idealized modeling approach

    NASA Astrophysics Data System (ADS)

    Picard, Lee

    A method is developed for forcing a full-physics, full-terrain model with an idealized, balanced atmosphere determined by an input sounding. The initialization technique is applied to investigate the sensitivity of orographic precipitation in Pacific Northwest terrain to wind direction under both barotropic and sheared flow conditions approximating an atmospheric river. The model results agree well with previous studies that considered typical conditions resulting in heavy precipitation, with the precipitation sensitivity to wind direction less than is estimated for similar deterministic cases. To explore the causes of sensitivity in the Olympic Mountains of western Washington State, additional experiments are carried out using modified terrain fields with smoothed or idealized Olympic Mountains, or with nearby orography removed. Model simulations suggest that the sensitivity of Olympic Mountain precipitation to wind direction is more strongly modulated by the presence of surrounding orography than by the specific Olympic geometry.

  14. Constraining fundamental physics with future CMB experiments

    SciTech Connect

    Galli, Silvia; Martinelli, Matteo; Melchiorri, Alessandro; Pagano, Luca; Sherwin, Blake D.; Spergel, David N.

    2010-12-15

    The Planck experiment will soon provide a very accurate measurement of cosmic microwave background anisotropies. This will let cosmologists determine most of the cosmological parameters with unprecedented accuracy. Future experiments will improve and complement the Planck data with better angular resolution and better polarization sensitivity. This unexplored region of the CMB power spectrum contains information on many parameters of interest, including neutrino mass, the number of relativistic particles at recombination, the primordial helium abundance, and the injection of additional ionizing photons by dark matter self-annihilation. We review the imprint of each parameter on the CMB and forecast the constraints achievable by future experiments by performing a Monte Carlo analysis on synthetic realizations of simulated data. We find that next generation satellite missions such as CMBPol could provide valuable constraints with a precision close to that expected in current and near future laboratory experiments. Finally, we discuss the implications of this intersection between cosmology and fundamental physics.

  15. A low-power high-sensitivity single-chip receiver for NMR microscopy.

    PubMed

    Anders, Jens; Handwerker, Jonas; Ortmanns, Maurits; Boero, Giovanni

    2016-05-01

    In this paper, we present a fully-integrated receiver for NMR microscopy applications manufactured in a 0.13μm CMOS technology. The design co-integrates a 10-turn planar detection coil together with a complete quadrature, low-IF downconversion receiver on a single chip, which operates from a single 1.5V supply with a total power dissipation of 18mW. The detector's measured time-domain spin sensitivity is 3×10(13)(1)Hspins/Hz at 7T. Additionally, the paper discusses two important aspects of NMR microscopy using planar detection coils: the link between the detection coil's spin sensitivity and the achievable image SNR and the correction of image artifacts induced by the inhomogeneous sensitivity profile of planar detection coils. More specifically, we derive analytical expressions for both the theoretical image SNR as a function of the coil's spin sensitivity and the sensitivity correction for a known coil sensitivity profile in CTI MR imaging experiments. Both expressions are validated using measured data in the imaging section of the paper. Thanks to the improved spin sensitivity of the utilized integrated receiver chip compared to a previously presented design, we were able to obtain sensitivity corrected images in a 7T spectroscopy magnet with isotropic resolutions of 9.6μm and 5μm with single-shot SNRs of 37 and 15 in relatively short imaging times of 4.4h and 24h, respectively. PMID:27011023

  16. A low-power high-sensitivity single-chip receiver for NMR microscopy

    NASA Astrophysics Data System (ADS)

    Anders, Jens; Handwerker, Jonas; Ortmanns, Maurits; Boero, Giovanni

    2016-05-01

    In this paper, we present a fully-integrated receiver for NMR microscopy applications manufactured in a 0.13 μm CMOS technology. The design co-integrates a 10-turn planar detection coil together with a complete quadrature, low-IF downconversion receiver on a single chip, which operates from a single 1.5 V supply with a total power dissipation of 18 mW. The detector's measured time-domain spin sensitivity is 3 ×1013 1Hspins /√{Hz } at 7 T. Additionally, the paper discusses two important aspects of NMR microscopy using planar detection coils: the link between the detection coil's spin sensitivity and the achievable image SNR and the correction of image artifacts induced by the inhomogeneous sensitivity profile of planar detection coils. More specifically, we derive analytical expressions for both the theoretical image SNR as a function of the coil's spin sensitivity and the sensitivity correction for a known coil sensitivity profile in CTI MR imaging experiments. Both expressions are validated using measured data in the imaging section of the paper. Thanks to the improved spin sensitivity of the utilized integrated receiver chip compared to a previously presented design, we were able to obtain sensitivity corrected images in a 7 T spectroscopy magnet with isotropic resolutions of 9.6 μm and 5 μm with single-shot SNRs of 37 and 15 in relatively short imaging times of 4.4 h and 24 h, respectively.

  17. Pressure Sensitive Paints

    NASA Technical Reports Server (NTRS)

    Liu, Tianshu; Bencic, T.; Sullivan, J. P.

    1999-01-01

    This article reviews new advances and applications of pressure sensitive paints in aerodynamic testing. Emphasis is placed on important technical aspects of pressure sensitive paint including instrumentation, data processing, and uncertainty analysis.

  18. Dynamical compactness and sensitivity

    NASA Astrophysics Data System (ADS)

    Huang, Wen; Khilko, Danylo; Kolyada, Sergiĭ; Zhang, Guohua

    2016-05-01

    To link the Auslander point dynamics property with topological transitivity, in this paper we introduce dynamically compact systems as a new concept of a chaotic dynamical system (X , T) given by a compact metric space X and a continuous surjective self-map T : X → X. Observe that each weakly mixing system is transitive compact, and we show that any transitive compact M-system is weakly mixing. Then we discuss the relationships between it and other several stronger forms of sensitivity. We prove that any transitive compact system is Li-Yorke sensitive and furthermore multi-sensitive if it is not proximal, and that any multi-sensitive system has positive topological sequence entropy. Moreover, we show that multi-sensitivity is equivalent to both thick sensitivity and thickly syndetic sensitivity for M-systems. We also give a quantitative analysis for multi-sensitivity of a dynamical system.

  19. Gender differences in dimensions of anxiety sensitivity.

    PubMed

    Stewart, S H; Taylor, S; Baker, J M

    1997-01-01

    Anxiety sensitivity (AS) is the fear of anxiety-related sensations arising from beliefs that these sensations have harmful physical, psychological, or social consequences. AS is measured using the Anxiety Sensitivity Index (ASI), a 16-item self-report questionnaire. Little is known about the origins of AS, although social learning experiences (including sex-role socialization experiences) may be important. The present study examined whether there were gender differences in: (a) the lower- or higher-order factor structure of the ASI; and/or (b) pattern of ASI factor scores. The ASI was completed by 818 university students (290 males; 528 females). Separate principal components analyses on the ASI items of the total sample, males, and females revealed nearly identical lower-order three-factor structures for all groups, with factors pertaining to fears about the anticipated (a) physical, (b) psychological, and (c) social consequences of anxiety. Separate principal components analyses on the lower-order factor scores of the three samples revealed similar unidimensional higher-order solutions for all groups. Gender x AS dimension analyses on ASI lower-order factor scores showed that: females scored higher than males only on the physical concerns factor; females scored higher on the physical concerns factor relative to their scores on the social and psychological concerns factors; and males scored higher on the social and psychological concerns factors relative to their scores on the physical concerns factor. Finally, females scored higher than males on the higher-order factor representing the global AS construct. The present study provides further support for the empirical distinction of the three lower-order dimensions of AS, and additional evidence for the theoretical hierarchical structure of the ASI. Results also suggest that males and females differ on these various AS dimensions in ways consistent with sex role socialization practices. PMID:9168341

  20. A Proposed Instructional Theory for Integer Addition and Subtraction

    ERIC Educational Resources Information Center

    Stephan, Michelle; Akyuz, Didem

    2012-01-01

    This article presents the results of a 7th-grade classroom teaching experiment that supported students' understanding of integer addition and subtraction. The experiment was conducted to test and revise a hypothetical learning trajectory so as to propose a potential instructional theory for integer addition and subtraction. The instructional…

  1. Animal models for protein respiratory sensitizers.

    PubMed

    Ward, Marsha D W; Selgrade, Maryjane K

    2007-01-01

    Protein induced respiratory hypersensitivity, particularly atopic disease in general, and allergic asthma in particular, has increased dramatically over the last several decades in the US and other industrialized nations as a result of ill-defined changes in living conditions in modern western society. In addition, work-related asthma has become the most frequently diagnosed occupational respiratory illness. Animal models have demonstrated great utility in developing an understanding of the etiology and mechanisms of many diseases. A few models been developed as predictive models to identify a protein as an allergen or to characterize its potency. Here we describe animal models that have been used to investigate and identify protein respiratory sensitizers. In addition to prototypical experimental design, methods for exposure route, sample collection, and endpoint assessment are described. Some of the most relevant endpoints in assessing the potential for a given protein to induce atopic or allergic asthma respiratory hypersensitivity are the development of cytotropic antibodies (IgE, IgG1), eosinophil influx into the lung, and airway hyperresponsiveness to the sensitizing protein and/or to non-antigenic stimuli (Mch). The utility of technologies such as PCR and multiplexing assay systems is also described. These models and methods have been used to elucidate the potential for protein sources to induce allergy, identify environmental conditions (pollutants) to impact allergy responsiveness, and establish safe exposure limits. As an example, data are presented from an experiment designed to compare the allergenicity of a fungal biopesticide Metarhizium anisopliae (MACA) crude extract with the one of its components, conidia (CON) extract. PMID:17161304

  2. An Additive Definition of Molecular Complexity.

    PubMed

    Böttcher, Thomas

    2016-03-28

    A framework for molecular complexity is established that is based on information theory and consistent with chemical knowledge. The resulting complexity index Cm is derived from abstracting the information content of a molecule by the degrees of freedom in the microenvironments on a per-atom basis, allowing the molecular complexity to be calculated in a simple and additive way. This index allows the complexity of any molecule to be universally assessed and is sensitive to stereochemistry, heteroatoms, and symmetry. The performance of this complexity index is evaluated and compared against the current state of the art. Its additive character gives consistent values also for very large molecules and supports direct comparisons of chemical reactions. Finally, this approach may provide a useful tool for medicinal chemistry in drug design and lead selection, as demonstrated by correlating molecular complexities of antibiotics with compound-specific parameters. PMID:26857537

  3. Life Experience Deserves Credit.

    ERIC Educational Resources Information Center

    Snider, John C.; McGee, Leo

    1981-01-01

    Institutions granting credit for life experience are faced with obstacles related to the complex, sensitive, threatening, and ambitious nature of the procedure. A three-step process for implementation of a plan for developing credit for life experiences is provided, along with a dissenting opinion. (MLW)

  4. Parameter sensitivity analysis of IL-6 signalling pathways.

    PubMed

    Chu, Y; Jayaraman, A; Hahn, J

    2007-11-01

    Signal transduction pathways generally consist of a large number of individual components and have an even greater number of parameters describing their reaction kinetics. Although the structure of some signalling pathways can be found in the literature, many of the parameters are not well known and they would need to be re-estimated from experimental data for each specific case. However it is not feasible to estimate hundreds of parameters because of the cost of the experiments associated with generating data. Parameter sensitivity analysis can address this situation as it investigates how the system behaviour is changed by variations of parameters and the analysis identifies which parameters play a key role in signal transduction. Only these important parameters need then be re-estimated using data from further experiments. This article presents a detailed parameter sensitivity analysis of the JAK/STAT and MAPK signal transduction pathway that is used for signalling by the cytokine IL-6. As no parameter sensitivity analysis technique is known to work best for all situations, a comparison of the results returned by four techniques is presented: differential analysis, the Morris method, a sampling-based approach and the Fourier amplitude sensitivity test. The recruitment of the transcription factor STAT3 to the dimer of the phosphorylated receptor complex is determined as the most important step by the sensitivity analysis. Additionally, the desphosphorylation of the nuclear STAT3 dimer by PP2 as well as feedback inhibition by SOCS3 are found to play an important role for signal transduction. PMID:18203580

  5. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  6. Sensitivity study of a dynamic thermodynamic sea ice model

    SciTech Connect

    Holland, D.M.; Mysak, L.A.; Manak, D.K. )

    1993-02-15

    A numerical simulation of the seasonal sea ice cover in the Arctic Ocean and the Greenland, Iceland, and Norwegian seas is presented. The sea ice model is extracted from Oberhuber's (1990) coupled sea ice-mixed layer-isopycnal general circulation model and is written in spherical coordinates. The advantage of such a model over previous sea ice models is that it can be easily coupled to either global atmospheric or ocean general circulation models written in spherical coordinates. In this model, the thermodynamics are a modification of that of Parkinson and Washington, while the dynamics use the full Hibler viscous-plastic rheology. Monthly thermodynamic and dynamic forcing fields for the atmosphere and ocean are specified. The simulations of the seasonal cycle of ice thickness, compactness, and velocity, for a control set of parameters, compare favorably with the known seasonal characteristics of these fields. A sensitivity study of the control simulation of the seasonal sea ice cover is presented. The sensitivity runs are carried out under three different themes, namely, numerical conditions, parameter values, and physical processes. This last theme refers to experiments in which physical processes are either newly added or completely removed from the model. Approximately 80 sensitivity runs have been performed in which a change from the control run environment has been implemented. Comparisons have been made between the control run and a particular sensitivity run based on time series of the seasonal cycle of the domain-averaged ice thickness, compactness, areal coverage, and kinetic energy. In addition, spatially varying fields of ice thickness, compactness, velocity, and surface temperature for each season are presented for selected experiments. A brief description and discussion of the more interesting experiments are presented. The simulation of the seasonal cycle of Arctic sea ice cover is shown to be robust. 31 refs., 20 figs., 5 tabs.

  7. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  8. Analysis of compensation for a g-sensitivity scale-factor error for a MEMS vibratory gyroscope

    NASA Astrophysics Data System (ADS)

    Park, Byung Su; Han, KyungJun; Lee, SangWoo; Yu, MyeongJong

    2015-11-01

    In this paper, we present recent work on the g-sensitivity error of the MEMS vibratory gyroscope. Generally, the g-sensitivity error has been ignored in the use of commercial MEMS vibratory gyroscopes, but it deserves our attention if we are to achieve tactical grade performance for military applications. First, we mathematically show the reason the g-sensitivity error occurs as an additional scale-factor error during the use of MEMS vibratory gyroscopes. Then, we estimate the g-sensitivity error using FEM simulation and verify it by experiment using a centrifugal machine. Consequently, we propose a compensation model to accommodate the g-sensitivity error of a gyroscope and confirm the theoretical prediction with experimental results.

  9. Could the Pliocene constrain the equilibrium climate sensitivity?

    NASA Astrophysics Data System (ADS)

    Hargreaves, J. C.; Annan, J. D.

    2016-08-01

    The mid-Pliocene Warm Period (mPWP) is the most recent interval in which atmospheric carbon dioxide was substantially higher than in modern pre-industrial times. It is, therefore, a potentially valuable target for testing the ability of climate models to simulate climates warmer than the pre-industrial state. The recent Pliocene Model Intercomparison Project (PlioMIP) presented boundary conditions for the mPWP and a protocol for climate model experiments. Here we analyse results from the PlioMIP and, for the first time, discuss the potential for this interval to usefully constrain the equilibrium climate sensitivity. We observe a correlation in the ensemble between their tropical temperature anomalies at the mPWP and their equilibrium sensitivities. If the real world is assumed to also obey this relationship, then the reconstructed tropical temperature anomaly at the mPWP can in principle generate a constraint on the true sensitivity. Directly applying this methodology using available data yields a range for the equilibrium sensitivity of 1.9-3.7 °C, but there are considerable additional uncertainties surrounding the analysis which are not included in this estimate. We consider the extent to which these uncertainties may be better quantified and perhaps lessened in the next few years.

  10. Sensitivity Test Analysis

    1992-02-20

    SENSIT,MUSIG,COMSEN is a set of three related programs for sensitivity test analysis. SENSIT conducts sensitivity tests. These tests are also known as threshold tests, LD50 tests, gap tests, drop weight tests, etc. SENSIT interactively instructs the experimenter on the proper level at which to stress the next specimen, based on the results of previous responses. MUSIG analyzes the results of a sensitivity test to determine the mean and standard deviation of the underlying population bymore » computing maximum likelihood estimates of these parameters. MUSIG also computes likelihood ratio joint confidence regions and individual confidence intervals. COMSEN compares the results of two sensitivity tests to see if the underlying populations are significantly different. COMSEN provides an unbiased method of distinguishing between statistical variation of the estimates of the parameters of the population and true population difference.« less

  11. 75 FR 27313 - Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED PROCUREMENT LIST Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the... or Severely Disabled, Jefferson Plaza 2, Suite 10800, 1421 Jefferson Davis Highway,...

  12. New sensitive seismic cable with imbedded geophones

    NASA Astrophysics Data System (ADS)

    Pakhomov, Alex; Pisano, Dan; Goldburt, Tim

    2005-10-01

    Seismic detection systems for homeland security applications are an important additional layer to perimeter and border protection and other security systems. General Sensing Systems has been developing low mass, low cost, highly sensitive geophones. These geophones are being incorporated within a seismic cable. This article reports on the concept of a seismic sensitive cable and seismic sensitive ribbon design. Unlike existing seismic cables with sensitivity distributed along their lengths, the GSS new cable and ribbon possesses high sensitivity distributed in several points along the cable/ribbon with spacing of about 8-12 to 100 meters between geophones. This cable/ribbon is highly suitable for design and installation in extended perimeter protection systems. It allows the use of a mechanical cable layer for high speed installation. We show that any installation mistakes in using the GSS seismic sensitive cable/ribbon have low impact on output seismic signal value and detection range of security systems.

  13. Climate Sensitivity in the Anthropocene

    NASA Technical Reports Server (NTRS)

    Previdi, M.; Liepert, B. G.; Peteet, Dorothy M.; Hansen, J.; Beerling, D. J.; Broccoli, A. J.; Frolking, S.; Galloway, J. N.; Heimann, M.; LeQuere, C.; Levitus, S.; Ramaswamy, V.

    2014-01-01

    Climate sensitivity in its most basic form is defined as the equilibrium change in global surface temperature that occurs in response to a climate forcing, or externally imposed perturbation of the planetary energy balance. Within this general definition, several specific forms of climate sensitivity exist that differ in terms of the types of climate feedbacks they include. Based on evidence from Earth's history, we suggest here that the relevant form of climate sensitivity in the Anthropocene (e.g. from which to base future greenhouse gas (GHG) stabilization targets) is the Earth system sensitivity including fast feedbacks from changes in water vapour, natural aerosols, clouds and sea ice, slower surface albedo feedbacks from changes in continental ice sheets and vegetation, and climate-GHG feedbacks from changes in natural (land and ocean) carbon sinks. Traditionally, only fast feedbacks have been considered (with the other feedbacks either ignored or treated as forcing), which has led to estimates of the climate sensitivity for doubled CO2 concentrations of about 3 C. The 2×CO2 Earth system sensitivity is higher than this, being approx. 4-6 C if the ice sheet/vegetation albedo feedback is included in addition to the fast feedbacks, and higher still if climate-GHG feedbacks are also included. The inclusion of climate-GHG feedbacks due to changes in the natural carbon sinks has the advantage of more directly linking anthropogenic GHG emissions with the ensuing global temperature increase, thus providing a truer indication of the climate sensitivity to human perturbations. The Earth system climate sensitivity is difficult to quantify due to the lack of palaeo-analogues for the present-day anthropogenic forcing, and the fact that ice sheet and climate-GHG feedbacks have yet to become globally significant in the Anthropocene. Furthermore, current models are unable to adequately simulate the physics of ice sheet decay and certain aspects of the natural carbon and

  14. Future reactor experiments

    NASA Astrophysics Data System (ADS)

    Wen, Liangjian

    2015-07-01

    The non-zero neutrino mixing angle θ13 has been discovered and precisely measured by the current generation short-baseline reactor neutrino experiments. It opens the gate of measuring the leptonic CP-violating phase and enables the neutrino mass ordering. The JUNO and RENO-50 proposals aim at resolving the neutrino mass ordering using reactors. The experiment design, physics sensitivity, technical challenges as well as the progresses of those two proposed experiments are reviewed in this paper.

  15. Future reactor experiments

    SciTech Connect

    Wen, Liangjian

    2015-07-15

    The non-zero neutrino mixing angle θ{sub 13} has been discovered and precisely measured by the current generation short-baseline reactor neutrino experiments. It opens the gate of measuring the leptonic CP-violating phase and enables the neutrino mass ordering. The JUNO and RENO-50 proposals aim at resolving the neutrino mass ordering using reactors. The experiment design, physics sensitivity, technical challenges as well as the progresses of those two proposed experiments are reviewed in this paper.

  16. Relational victimization, loneliness and depressive symptoms: indirect associations via self and peer reports of rejection sensitivity.

    PubMed

    Zimmer-Gembeck, Melanie J; Trevaskis, Sarah; Nesdale, Drew; Downey, Geraldine A

    2014-04-01

    Theory suggests that aversive social experiences generate emotional maladjustment because they prompt the development of a hypersensitivity to perceiving and overreacting to rejection. The primary aim of this study was to test hypothesized direct and indirect (via rejection sensitivity) links of overt/relational victimization and friendship conflict with early adolescents' loneliness and depressive symptoms. Participants were 366 Australian early adolescents age 10-14 years (50.5 % girls). Using both a self-report and peer-report measure of rejection sensitivity, no difference was found when comparing the significant correlations of each measure with loneliness and depressive symptoms. Tests of direct and indirect associations with structural equation modeling showed that adolescents higher in relational victimization reported more loneliness and depressive symptoms and part of this association was by way of their greater self-reports of rejection sensitivity and their peers' identification that they were higher in rejection sensitivity. Additionally, relational victimization was the only unique correlate of emotional maladjustment, and adolescents who reported more overt victimization were identified by their peers as higher in rejection sensitivity. Finally, gender and rejection sensitivity were tested as moderators. No gender moderation was found, but friendship conflict was associated more strongly with emotional maladjustment for adolescents low, rather than high, in rejection sensitivity. These findings identify relational victimization as particularly salient for emotional maladjustment both directly and indirectly via links with elevated rejection sensitivity. They show how rejection sensitivity and aversive experiences may contribute independently and jointly to emotional maladjustment for both boys and girls. PMID:23955324

  17. FAITH Pressure-Sensitive Paint and Surface Oil Flow Visualizations

    NASA Video Gallery

    Pressure-sensitive paint and surface oil flow visualization experiments are performed on a three dimensional model of a small hill. This experiment was part of a series of measurements of the compl...

  18. Noise sensitivity: A neurophenomenological perspective.

    PubMed

    Dzhambov, Angel M

    2015-11-01

    This paper addresses the current limitations of noise sensitivity research and the benefit of undertaking a neurophenomenological approach of investigation. It begins by questioning the invariance of noise sensitivity across different studies and contexts and argues that these are issues associated with the psychometric construct rather than the underlying reaction patterns. It suggest that our definition and operationalization of noise sensitivity might have been misspecified and that it needs to be revised on the basis of heuristically derived first-person data about our experiences of noise. It then shows why the basic principles of the neurophenomenological program are applicable to psychoacoustic research. Namely, it argues that phenomenological training leading to reflexive introspection and verbalization of our susceptibility to noise might have three-fold implication - (i) it will generate deeper understanding of noise sensitivity which will then allow us to deduce a hierarchical structure of meaning and concepts to supplement and be fed to quantitative research, (ii) it will provide better interpretation of neuroimaging and electroencephalographic data related to noise reaction and perception, which in turn will allow a process of reciprocal validation, (iii) and, most importantly, it presents a promising technique for emotional regulation of noise processing via modulation of the amygdalar function, when a state of awareness of this processing has been achieved. PMID:26315447

  19. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  20. Drought sensitivity predicts habitat size sensitivity in an aquatic ecosystem.

    PubMed

    Amundrud, Sarah L; Srivastava, Diane S

    2015-07-01

    Species and trophic richness often increase with habitat size. Although many ecological processes have been evoked to explain both patterns, the environmental stress associated with small habitats has rarely been considered. We propose that larger habitats may be species rich simply because their environmental conditions are within the fundamental niche of more species; larger habitats may also have more trophic levels if traits of predators render them vulnerable to environmental stress. We test this hypothesis using the aquatic insect larvae in water-filled bromeliads. In bromeliads, the probability of desiccation is greatest in small plants. For the 10 most common bromeliad insect taxa, we ask whether differences in drought tolerance and regional abundances between taxa predict community and trophic composition over a gradient of bromeliad size. First, we used bromeliad survey data to calculate the mean habitat size of occurrence of each taxon. Comparing the observed mean habitat size of occurrence to that expected from random species assembly based on differences in their regional abundances allowed us to obtain habitat size sensitivity indices (as Z scores) for the various insect taxa. Second, we obtained drought sensitivity indices by subjecting individual insects to drought and measuring the effects on relative growth rates in a mesocosm experiment. We found that drought sensitivity strongly, predicts habitat size sensitivity in bromeliad insects. However, an increase in trophic richness with habitat size could not be explained by an increased sensitivity of predators to drought, but rather by sampling effects, as predators were rare compared to lower trophic levels. This finding suggests that physiological tolerance to environmental stress can be relevant in explaining the universal increase in species with habitat size. PMID:26378317

  1. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  2. Space transportation architecture: Reliability sensitivities

    NASA Technical Reports Server (NTRS)

    Williams, A. M.

    1992-01-01

    A sensitivity analysis is given of the benefits and drawbacks associated with a proposed Earth to orbit vehicle architecture. The architecture represents a fleet of six vehicles (two existing, four proposed) that would be responsible for performing various missions as mandated by NASA and the U.S. Air Force. Each vehicle has a prescribed flight rate per year for a period of 31 years. By exposing this fleet of vehicles to a probabilistic environment where the fleet experiences failures, downtimes, setbacks, etc., the analysis involves determining the resiliency and costs associated with the fleet of specific vehicle/subsystem reliabilities. The resources required were actual observed data on the failures and downtimes associated with existing vehicles, data based on engineering judgement for proposed vehicles, and the development of a sensitivity analysis program.

  3. Study of the Intergranular Corrosion of Sensitized UNS S31803 Stainless Steel in Transpassive Region

    NASA Astrophysics Data System (ADS)

    Morshed Behbahani, Khashayar; Najafisayar, Pooria; Pakshir, Mahmoud

    2016-06-01

    In this study, intergranular corrosion behavior of UNS S31803 duplex stainless steel was investigated using conventional potentiodynamic polarization, double loop electrochemical potentiokinetic reactivation (DLEPR), and electrochemical impedance spectroscopy (EIS) technique carried out at different potentials in the transpassive region. Different types of heat treatments were used to obtain samples with different degrees of sensitization. The results of the DLEPR tests showed that the solution-annealed sample and that was sensitized for half an hour would be considered as nonsensitized ones. Moreover, the sample that was sensitized for 24 h exhibits the highest value of the degree of sensitization. Polarization test results showed a typical active-passive behavior from which the transpassive potential range was determined and used as the range of the applied DC bias in the EIS experiments. Three different AC responses (including capacitive and inductive responses) were observed depending on the value of applied DC bias in the EIS experiments. In addition, it was observed that the presence of the second inductive loop at high applied DC bias is due to the adsorption of nonsoluble corrosion products on the surface of the samples. Moreover, the fitted values to the charge transfer and polarization resistances (R ct and R P) decreased as the sensitization time increased from 30 min to 24 h. Such observations were in good accordance with the metallographic examination of the corroded surfaces, carried out by optical and scanning electron microscopy techniques, revealing discontinuous grain boundary attack in nonsensitized samples and a continuous network of grain boundary attack in the case of sensitized ones. Moreover, as the applied DC bias increases the ferrite phase attack also occurs in the sensitized samples. In addition, approximately no pitting corrosion was observed on the surface of the corroded samples which is in accordance with their respective cyclic

  4. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  5. White paper: Chemical sensitivity: history and phenomenology.

    PubMed

    Miller, C S

    1994-01-01

    Nearly everyone has heard something about chemical sensitivity, either from personal experience with someone who has the condition or from the media. The television series Northern Exposure recently featured a chemically sensitive attorney who lived in a geodesic dome in Alaska, and L.A. Law depicted the struggles of a Persian Gulf veteran with chemical sensitivities who lost his case against the Veterans Administration, but may appeal later in the season. Television news programs and the printed media have showcased patients living spartan existences in remote areas or in aluminum foil-lined rooms. Our views of the illness no doubt are colored by our own personal experiences of it. While some discount or make jokes about chemical sensitivity or these patients, physicians who have seen a number of them are discovering that many appear to be credible individuals with prior good work records who say they became ill following an identifiable exposure to chemicals. PMID:7778099

  6. Cloud radiative forcing sensitivity to Arctic synoptic regimes, surface type, cloud phase and cloud properties during the Fall 2014 Arctic Radiation, IceBridge and Sea-Ice Experiment (ARISE)

    NASA Astrophysics Data System (ADS)

    Segal-Rosenheimer, Michal; Redemann, Jens; Shinozuka, Yohei; Flynn, Connor; LeBanc, Samuel; Schmidt, Sebastian; Song, Shi; Bucholtz, Anthony; Reid, Elizabeth; Anderson, Bruce; Corr, Chelsea; Smith, William L.; Kato, Seiji; Spangenberg, Douglas A.; Hofton, Michelle; Moore, Richard; Winstead, Edward; Thornhill, Lee K.

    2015-04-01

    Surface cloud radiative forcing (CRF) estimates in the Arctic cover a wide range of values when comparing various datasets (e.g. MERRA, CERES), and show high bias when compared to in-situ ground-based flux measurement stations (e.g. in Greenland) [Wenshan and Zender, 2014]. These high variations and biases result from an intricate relationship between the prevailing synoptic regimes, surface types (open ocean versus sea-ice), and cloud properties [e.g. Barton et al., 2012; Bennartz et al., 2013]. To date, analyses are focused on large-scale or inter-annual comparisons [e.g. Barton et al., 2012; Taylor et al., 2014], or on several specific ground-based sites [Shupe et al., 2004; Sedlar et al., 2012]. Nevertheless, smaller scale CRF variations related to the sharp changes in sea-ice cover, cloud type and synoptic regimes in autumn are still not well understood. Here, we are focusing on assessing the CRF sensitivity to a composite variable matrix of atmospheric stability regimes, cloud profiles and properties and surface type changes during the NASA ARISE campaign conducted in the Fall of 2014 during the Arctic sea-ice minimum in the Beaufort Sea. We are interested in answering the following questions: (1) what are the combinations of distinct synoptic regimes, surface types, and cloud properties that result in the lowest or highest simulated CRF values over the Arctic Beaufort Sea during the autumn 2014 sea-ice growth period?, and (2) can we relate these simulated extremes to the observations made during the ARISE campaign? We are using the libRadtran radiative transfer modeling package to calculate the CRF sensitivity matrix, with daily gridded atmospheric profiles input from MERRA re-analysis, cloud fields and properties from CALIPSO, MODIS, AVHRR, daily variations in sea-ice margins from AMSR-2, and complementary airborne measurements collected on the C-130 during the campaign. In performing sensitivity analysis, we examine CRF extremes sorted by atmospheric

  7. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  8. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  9. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting. PMID:26118220

  10. Determination of Mercury in Milk by Cold Vapor Atomic Fluorescence: A Green Analytical Chemistry Laboratory Experiment

    ERIC Educational Resources Information Center

    Armenta, Sergio; de la Guardia, Miguel

    2011-01-01

    Green analytical chemistry principles were introduced to undergraduate students in a laboratory experiment focused on determining the mercury concentration in cow and goat milk. In addition to traditional goals, such as accuracy, precision, sensitivity, and limits of detection in method selection and development, attention was paid to the…

  11. Effect of human saliva on the fluoride sensitivity of glucose uptake by Streptococcus mutans.

    PubMed

    Germaine, G R; Tellefson, L M

    1981-12-01

    The fluoride (F) sensitivity of glucose uptake by whole cell suspensions of streptococcus mutans in the presence and absence of human whole salivary supernatant was studied. It was observed that dithiothreitol (DTT) and other thiols markedly reduced the F sensitivity of cells when saliva (50%, vol/vol) was present during glucose uptake. In the absence of saliva, cells were sensitive to 2 to 2.5 mM F regardless of the presence of thiols. Supplementation of cells in phosphate or tris(hydroxymethyl)aminomethane-hydrochloride buffers with physiological concentrations of calcium or phosphate had no effect on the F sensitivity of the organism. Experiments with permeabilized cells suggested that thiols themselves had no direct effect on the F sensitivity of enolase (a principal F target). Cells pretreated with DDT subsequently exhibited decreased F sensitivity when examined in the presence of saliva but not in the absence of saliva. Cells pretreated with whole salivary supernatant were found to be subsequently less sensitive to F in the absence of saliva during glucose uptake. Furthermore, in cases where cells were pretreated with saliva, subsequent additions of DDT were unnecessary to obtain maximal reduction in the F sensitivity of glucose uptake. It was concluded that the saliva-dependent reduction in F sensitivity of glucose uptake was not due to sequestration of available F by salivary constituents. The data suggest that a salivary component(s) interacts directly with the microorganism in some manner which results in reduced F sensitivity of the process under study. Possible mechanisms of saliva action are discussed. PMID:7333673

  12. Effect of human saliva on the fluoride sensitivity of glucose uptake by Streptococcus mutans.

    PubMed Central

    Germaine, G R; Tellefson, L M

    1981-01-01

    The fluoride (F) sensitivity of glucose uptake by whole cell suspensions of streptococcus mutans in the presence and absence of human whole salivary supernatant was studied. It was observed that dithiothreitol (DTT) and other thiols markedly reduced the F sensitivity of cells when saliva (50%, vol/vol) was present during glucose uptake. In the absence of saliva, cells were sensitive to 2 to 2.5 mM F regardless of the presence of thiols. Supplementation of cells in phosphate or tris(hydroxymethyl)aminomethane-hydrochloride buffers with physiological concentrations of calcium or phosphate had no effect on the F sensitivity of the organism. Experiments with permeabilized cells suggested that thiols themselves had no direct effect on the F sensitivity of enolase (a principal F target). Cells pretreated with DDT subsequently exhibited decreased F sensitivity when examined in the presence of saliva but not in the absence of saliva. Cells pretreated with whole salivary supernatant were found to be subsequently less sensitive to F in the absence of saliva during glucose uptake. Furthermore, in cases where cells were pretreated with saliva, subsequent additions of DDT were unnecessary to obtain maximal reduction in the F sensitivity of glucose uptake. It was concluded that the saliva-dependent reduction in F sensitivity of glucose uptake was not due to sequestration of available F by salivary constituents. The data suggest that a salivary component(s) interacts directly with the microorganism in some manner which results in reduced F sensitivity of the process under study. Possible mechanisms of saliva action are discussed. PMID:7333673

  13. Manipulating crystallization with molecular additives.

    PubMed

    Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

    2014-01-01

    Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications. PMID:24579880

  14. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  15. Are Psychopaths Morally Sensitive?

    ERIC Educational Resources Information Center

    Maxwell, Bruce; Le Sage, Leonie

    2009-01-01

    Philosophical and psychological opinion is divided over whether moral sensitivity, understood as the ability to pick out a situation's morally salient features, necessarily involves emotional engagement. This paper seeks to offer insight into this question. It reasons that if moral sensitivity does draw significantly on affective capacities of…

  16. Tuned cavity magnetometer sensitivity.

    SciTech Connect

    Okandan, Murat; Schwindt, Peter

    2009-09-01

    We have developed a high sensitivity (sensitivity levels.

  17. The negative affect hypothesis of noise sensitivity.

    PubMed

    Shepherd, Daniel; Heinonen-Guzejev, Marja; Heikkilä, Kauko; Dirks, Kim N; Hautus, Michael J; Welch, David; McBride, David

    2015-05-01

    Some studies indicate that noise sensitivity is explained by negative affect, a dispositional tendency to negatively evaluate situations and the self. Individuals high in such traits may report a greater sensitivity to other sensory stimuli, such as smell, bright light and pain. However, research investigating the relationship between noise sensitivity and sensitivity to stimuli associated with other sensory modalities has not always supported the notion of a common underlying trait, such as negative affect, driving them. Additionally, other explanations of noise sensitivity based on cognitive processes have existed in the clinical literature for over 50 years. Here, we report on secondary analyses of pre-existing laboratory (n = 74) and epidemiological (n = 1005) data focusing on the relationship between noise sensitivity to and annoyance with a variety of olfactory-related stimuli. In the first study a correlational design examined the relationships between noise sensitivity, noise annoyance, and perceptual ratings of 16 odors. The second study sought differences between mean noise and air pollution annoyance scores across noise sensitivity categories. Results from both analyses failed to support the notion that, by itself, negative affectivity explains sensitivity to noise. PMID:25993104

  18. The Negative Affect Hypothesis of Noise Sensitivity

    PubMed Central

    Shepherd, Daniel; Heinonen-Guzejev, Marja; Heikkilä, Kauko; Dirks, Kim N.; Hautus, Michael J.; Welch, David; McBride, David

    2015-01-01

    Some studies indicate that noise sensitivity is explained by negative affect, a dispositional tendency to negatively evaluate situations and the self. Individuals high in such traits may report a greater sensitivity to other sensory stimuli, such as smell, bright light and pain. However, research investigating the relationship between noise sensitivity and sensitivity to stimuli associated with other sensory modalities has not always supported the notion of a common underlying trait, such as negative affect, driving them. Additionally, other explanations of noise sensitivity based on cognitive processes have existed in the clinical literature for over 50 years. Here, we report on secondary analyses of pre-existing laboratory (n = 74) and epidemiological (n = 1005) data focusing on the relationship between noise sensitivity to and annoyance with a variety of olfactory-related stimuli. In the first study a correlational design examined the relationships between noise sensitivity, noise annoyance, and perceptual ratings of 16 odors. The second study sought differences between mean noise and air pollution annoyance scores across noise sensitivity categories. Results from both analyses failed to support the notion that, by itself, negative affectivity explains sensitivity to noise. PMID:25993104

  19. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  20. Experiments on statistical mechanics using resonance ionization spectroscopy

    SciTech Connect

    Iturbe, J.; Allman, S.L.; Hurst, G.S.; Payne, M.G.

    1984-04-01

    Five different fluctuation phenomena at the atomic and molecular levels have been studied by resonance ionization spectroscopy techniques with one-atom detection sensitivity. The Poisson distribution described the observed frequency distributions suggesting random behavior. In addition, a gedanken experiment suggested by Einstein and Furth on the diffusion of atoms was performed in order to test the equality between time and ensemble averages. The obtained results confirmed the ergodicity of the studied system.

  1. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  2. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  3. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  4. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  5. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  6. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  7. Silage Additives and Management Issues

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inoculants are the most common silage additives in the United States. These products contain lactic acid bacteria to supplement the lactic acid bacteria naturally on the crop and help insure a consistent fermentation in the silo. There are three types of inoculants: homofermentative lactic acid bact...

  8. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  9. Rats are sensitive to ambiguity.

    PubMed

    Fast, Cynthia D; Blaisdell, Aaron P

    2011-12-01

    In the present study, we investigated response decisions made under conditions of incomplete information in rats. In Experiment 1, rats were trained on either a positive patterning (PP; A-, B-, AB+) or a negative patterning (NP; A+, B+, AB-) instrumental lever-press discrimination. Subjects that had learned an NP discrimination responded less to Cue A when Cue B was covered at test. The cover did not, however, affect test responses to Cue A in the PP condition. In Experiment 2, rats received concurrent training on both PP and NP discriminations. After concurrent training, responses to Cue A were different with B covered versus uncovered for both NP and PP discriminations. We discuss possible accounts for why exposure to a nonlinearly soluble discrimination (NP) may have affected sensitivity to cue ambiguity produced by the cover. These results have interesting implications for representational processes engaged in problem solving. PMID:21968926

  10. Asphalt and asphalt additives. Transportation research record

    SciTech Connect

    Not Available

    1992-01-01

    Contents: use of asphalt emulsions for in-place recycling: oregon experience; gap-graded cold asphalt concrete: benefits of polymer-modified asphalt cement and fibers; cold in-place recycling for rehabilitation and widening of low-volume flexible pavements in indiana; in situ cold recycling of bituminous pavements with polymer-modified high float emulsions; evaluation of new generation of antistripping additives; correlation between performance-related characteristics of asphalt cement and its physicochemical parameters using corbett's fractions and hpgc; reaction rates and hardening susceptibilities as determined from pressure oxygen vessel aging of asphalts; evaluation of aging characteristics of asphalts by using tfot and rtfot at different temperature levels; summary of asphalt additive performance at selected sites; relating asphalt absorption to properties of asphalt cement and aggregate; study of the effectiveness of styrene-butadiene rubber latex in hot mix asphalt mixes; stability of straight and polymer-modified asphalts.

  11. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  12. Extended Forward Sensitivity Analysis for Uncertainty Quantification

    SciTech Connect

    Haihua Zhao; Vincent A. Mousseau

    2008-09-01

    This report presents the forward sensitivity analysis method as a means for quantification of uncertainty in system analysis. The traditional approach to uncertainty quantification is based on a “black box” approach. The simulation tool is treated as an unknown signal generator, a distribution of inputs according to assumed probability density functions is sent in and the distribution of the outputs is measured and correlated back to the original input distribution. This approach requires large number of simulation runs and therefore has high computational cost. Contrary to the “black box” method, a more efficient sensitivity approach can take advantage of intimate knowledge of the simulation code. In this approach equations for the propagation of uncertainty are constructed and the sensitivity is solved for as variables in the same simulation. This “glass box” method can generate similar sensitivity information as the above “black box” approach with couples of runs to cover a large uncertainty region. Because only small numbers of runs are required, those runs can be done with a high accuracy in space and time ensuring that the uncertainty of the physical model is being measured and not simply the numerical error caused by the coarse discretization. In the forward sensitivity method, the model is differentiated with respect to each parameter to yield an additional system of the same size as the original one, the result of which is the solution sensitivity. The sensitivity of any output variable can then be directly obtained from these sensitivities by applying the chain rule of differentiation. We extend the forward sensitivity method to include time and spatial steps as special parameters so that the numerical errors can be quantified against other physical parameters. This extension makes the forward sensitivity method a much more powerful tool to help uncertainty analysis. By knowing the relative sensitivity of time and space steps with other

  13. 21 CFR 170.20 - General principles for evaluating the safety of food additives.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) Upon written request describing the proposed use of an additive and the proposed experiments to... additive whether he believes the experiments planned will yield data adequate for an evaluation of...

  14. Mathematics Anxiety Effects in Simple and Complex Addition.

    ERIC Educational Resources Information Center

    Faust, Michael W.; And Others

    1996-01-01

    Reports three experiments that show that anxiety effects were prominent in two-column addition problems, especially those involving carrying. Elaborates a theory of mathematics anxiety. Contains 50 references. (SKS)

  15. Overview of low temperature sensitization

    SciTech Connect

    Fox, M.J.; McCright, R.D.

    1983-12-01

    A review of the literature on low temperature sensitization (LTS) has been conducted to determine if LTS-related microstructural changes can occur in Type 304L stainless steel within the times and temperatures associated with nuclear waste storage. It was found that Type 304L stainless steel is susceptible to sensitization and LTS, and that cold work plays an important role in determining the rate of LTS. Severely cold worked Type 304L stainless steel would clearly develop LTS-related microstructural changes within the times and temperatures associated with nuclear waste storage. These changes could lead to increased susceptibility to corrosion. Significant improvements in the long-term resistance to sensitization, LTS and corrosion can be achieved by modest changes in alloy composition and fabrication practices. Therefore, Type 304L would not be the preferred alloy of construction for nuclear waste storage canisters. The final qualification of an alternate canister alloy should involve corrosion experiments on actual canisters. Suggestions for alternate canister alloys are 316L, 316LN, 316ELC, 347, and XM-19. 47 references, 4 figures.

  16. [Contrast sensitivity in glaucoma].

    PubMed

    Bartos, D

    1989-05-01

    Author reports on results of the contrast sensitivity examinations using the Cambridge low-contrast lattice test supplied by Clement Clarke International LTD, in patients with open-angle glaucoma and ocular hypertension. In glaucoma patients there was observed statistically significant decrease of the contrast sensitivity. In patients with ocular hypertension decrease of the contrast sensitivity was in patients affected by corresponding changes of the visual field and of the optical disc. The main advantages of the Cambridge low-contrast lattice test were simplicity, rapidity and precision of its performance. PMID:2743444

  17. Pressure- and Temperature-Sensitive Paint at 0.3-m Transonic Cryogenic Tunnel

    NASA Technical Reports Server (NTRS)

    Watkins, A. Neal; Leighty, Bradley D.; Lipford, William E.; Goodman, Kyle Z.

    2015-01-01

    Recently both Pressure- and Temperature-Sensitive Paint experiments were conducted at cryogenic conditions in the 0.3-m Transonic Cryogenic Tunnel at NASA Langley Research Center. This represented a re-introduction of the techniques to the facility after more than a decade, and provided a means to upgrade the measurements using newer technology as well as demonstrate that the techniques were still viable in the facility. Temperature-Sensitive Paint was employed on a laminar airfoil for transition detection and Pressure-Sensitive Paint was employed on a supercritical airfoil. This report will detail the techniques and their unique challenges that need to be overcome in cryogenic environments. In addition, several optimization strategies will also be discussed.

  18. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  19. Seasonal Cycle Experiment on the Climate Sensitivity Due to a Doubling of CO2 with an atmospheric general circulation model coupled to a simple mixed-layer ocean model

    NASA Astrophysics Data System (ADS)

    Washington, Warren M.; Meehl, Gerald A.

    1984-10-01

    for the 2×CO2 case compared to the control. Areas of significant differences correspond to similar regions of large differences seen in the 3-year seasonal means. Certain regions experience summer drying seen in other studies, but zonal mean soil moisture differences show increases of soil moisture at mid and high latitudes of the northern hemisphere year-round, with a relative minimum of increase in late summer. These differences are attributed to large increases of soil moisture in late spring that persist into summer and cause a positive feedback with precipitation and low clouds. This inhibits continental warming and limits summer drying seen in the zonal mean as a result of the doubling of CO2. A comparison of the present experiment with the previous swamp model experiments is consistent with other studies in that the extent of sea ice in the control case critically influences the climatic response to increased CO2 such that more extensive sea ice is associated with a larger response. The seasonal cycle along with ocean heat storage in the mixed layer model are shown to be important in producing a more realistic simulation of the present climate than does the swamp experiment and, presumably, a more credible response to increased CO2. However, in the context of recent studies the overextensive sea ice in the present mixed layer model suggests that the inclusion of ocean heat transport from a fully computed ocean model and a resulting sea ice distribution closer to the observed would possibly produce less of a response to increased CO2.

  20. Assessing sensitivity of source term estimation

    NASA Astrophysics Data System (ADS)

    Long, Kerrie J.; Haupt, Sue Ellen; Young, George S.

    2010-04-01

    Source term estimation algorithms compute unknown atmospheric transport and dispersion modeling variables from concentration observations made by sensors in the field. Insufficient spatial and temporal resolution in the meteorological data as well as inherent uncertainty in the wind field data make source term estimation and the prediction of subsequent transport and dispersion extremely difficult. This work addresses the question: how many sensors are necessary in order to successfully estimate the source term and meteorological variables required for atmospheric transport and dispersion modeling? The source term estimation system presented here uses a robust optimization technique - a genetic algorithm (GA) - to find the combination of source location, source height, source strength, surface wind direction, surface wind speed, and time of release that produces a concentration field that best matches the sensor observations. The approach is validated using the Gaussian puff as the dispersion model in identical twin numerical experiments. The limits of the system are tested by incorporating additive and multiplicative noise into the synthetic data. The minimum requirements for data quantity and quality are determined by an extensive grid sensitivity analysis. Finally, a metric is developed for quantifying the minimum number of sensors necessary to accurately estimate the source term and to obtain the relevant wind information.

  1. Demonstration of high sensitivity laser ranging system

    NASA Technical Reports Server (NTRS)

    Millar, Pamela S.; Christian, Kent D.; Field, Christopher T.

    1994-01-01

    We report on a high sensitivity semiconductor laser ranging system developed for the Gravity and Magnetic Earth Surveyor (GAMES) for measuring variations in the planet's gravity field. The GAMES laser ranging instrument (LRI) consists of a pair of co-orbiting satellites, one which contains the laser transmitter and receiver and one with a passive retro-reflector mounted in an drag-stabilized housing. The LRI will range up to 200 km in space to the retro-reflector satellite. As the spacecraft pair pass over the spatial variations in the gravity field, they experience along-track accelerations which change their relative velocity. These time displaced velocity changes are sensed by the LRI with a resolution of 20-50 microns/sec. In addition, the pair may at any given time be drifting together or apart at a rate of up to 1 m/sec, introducing a Doppler shift into the ranging signals. An AlGaAs laser transmitter intensity modulated at 2 GHz and 10 MHz is used as fine and medium ranging channels. Range is measured by comparing phase difference between the transmit and received signals at each frequency. A separate laser modulated with a digital code, not reported in this paper, will be used for coarse ranging to unambiguously determine the distance up to 200 km.

  2. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  3. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  4. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  5. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  6. Influence of noise on a magnetically sensitive atom interferometer

    NASA Astrophysics Data System (ADS)

    Desavage, Sara A.; Srinivasan, Arvind; Davis, Jon P.; Zimmermann, Matthias; Efremov, Maxim; Rasel, Ernst; Schleich, Wolfgang; Welch, George R.; Mimih, Jihane; Narducci, Frank A.

    2016-05-01

    The inherent sensitivity of atom interferometer sensors has been well established and much progress has been made in the development of atom interferometer gravimeters, gravity gradiometers and gyroscopes e.g.. These interferometers use the ``clock'' transition which is magnetically insensitive. When considering interferometers with magnetically sensitive transitions operating in unshielded environments additional noise sources must be considered. The frequency content of the noise from these sources can vary dramatically, depending on the environment. In this talk, we will discuss these various noise sources and their impact on the performance of magnetically sensitive interferometers. Specifically, we identify three ways by which noise can be introduced into the system and their effect: fluctuating detuning, leading to a randomness of the interference pattern; fluctuating Rabi frequency, leading to pulse errors; non-uniformity of the magnetic field across the atom cloud, which can, under certain circumstances lead to a complete washing out of the interference pattern. Implications for our current experiments will be discussed. Sponsored by the Office of Naval Research.

  7. pH-sensitive liposomes: characterization and application

    SciTech Connect

    Connor, J.

    1986-01-01

    It has been demonstrated that liposomes composed of dioleoylphosphatidylethanolamine (DOPE) and palmitoylhomocysteine (PHC) have the ability to fuse with adjacent membranes upon exposure to mildly acid pH. The ability of liposomes to fuse is absolutely dependent on the presence of DOPE and a weakly acidic amphiphile. The acid induced fusion event is a leaky process, but the leakage can be reduced by 50%, with only a small loss of fusion ability, by the inclusion of 40 mole percent cholesterol. Using an established monoclonal antibody targeting system. pH-sensitive immunoliposomes were prepared which successfully delivered entrapped calcein to the cytoplasm of target cells. The addition of chloroquine, which raises the internal pH of cellular vacuoles, blocks the cytoplasmic delivery of the pH-sensitive immunoliposomes. pH-insensitive immunoliposomes delivered calcein only to the endosome/lysosome system and not the cytoplasm. /sup 31/P-NMR and light scattering of DOPE:OA liposomes under acidic conditions demonstrate that the effect of the protons and the divalent cations is to force the DOPE to revert to the hexagonal II configuration. In vivo experiments with DOPE:OA immunoliposomes indicate that the liposomes rapidly aggregate and release their contents upon exposure to plasma. These results indicate that pH-sensitive immunoliposomes are an effective tool for in vitro cytoplasmic delivery but are ineffective for in vivo delivery at this point in development.

  8. Dye-sensitized solar cells using laser processing techniques

    NASA Astrophysics Data System (ADS)

    Kim, Heungsoo; Pique, Alberto; Kushto, Gary P.; Auyeung, Raymond C. Y.; Lee, S. H.; Arnold, Craig B.; Kafafi, Zakia H.

    2004-07-01

    Laser processing techniques, such as laser direct-write (LDW) and laser sintering, have been used to deposit mesoporous nanocrystalline TiO2 (nc-TiO2) films for use in dye-sensitized solar cells. LDW enables the fabrication of conformal structures containing metals, ceramics, polymers and composites on rigid and flexible substrates without the use of masks or additional patterning techniques. The transferred material maintains a porous, high surface area structure that is ideally suited for dye-sensitized solar cells. In this experiment, a pulsed UV laser (355nm) is used to forward transfer a paste of commercial TiO2 nanopowder (P25) onto transparent conducting electrodes on flexible polyethyleneterephthalate (PET) and rigid glass substrates. For the cells based on flexible PET substrates, the transferred TiO2 layers were sintered using an in-situ laser to improve electron paths without damaging PET substrates. In this paper, we demonstrate the use of laser processing techniques to produce nc-TiO2 films (~10 μm thickness) on glass for use in dye-sensitized solar cells (Voc = 690 mV, Jsc = 8.7 mA/cm2, ff = 0.67, η = 4.0 % at 100 mW/cm2). This work was supported by the Office of Naval Research.

  9. Sensitivity of photoacoustic microscopy

    PubMed Central

    Yao, Junjie; Wang, Lihong V.

    2014-01-01

    Building on its high spatial resolution, deep penetration depth and excellent image contrast, 3D photoacoustic microscopy (PAM) has grown tremendously since its first publication in 2005. Integrating optical excitation and acoustic detection, PAM has broken through both the optical diffusion and optical diffraction limits. PAM has 100% relative sensitivity to optical absorption (i.e., a given percentage change in the optical absorption coefficient yields the same percentage change in the photoacoustic amplitude), and its ultimate detection sensitivity is limited only by thermal noise. Focusing on the engineering aspects of PAM, this Review discusses the detection sensitivity of PAM, compares the detection efficiency of different PAM designs, and summarizes the imaging performance of various endogenous and exogenous contrast agents. It then describes representative PAM applications with high detection sensitivity, and outlines paths to further improvement. PMID:25302158

  10. Contact sensitization in children.

    PubMed

    Manzini, B M; Ferdani, G; Simonetti, V; Donini, M; Seidenari, S

    1998-01-01

    Our study concerns contact sensitization in children, the frequency of which is still debated in the literature, even though specific reports are increasing. During a 7 year period (1988-1994) 670 patients, 6 months to 12 years of age, were patch tested with the European standard series, integrated with 24 haptens, at the same concentrations as for adults. We observed positive results in 42% of our patients. Thimerosal, nickel sulfate, Kathon CG, fragrance mix, neomycin, wool alcohols, and ammoniated mercury induced most of the positive responses. The highest sensitization rate was found in children from 0 to 3 years of age. Comments on main positive haptens are reported. Seventy-seven percent of our sensitized patients were atopics, suggesting that atopy represents a predisposing factor for contact hypersensitivity. Patch testing represents a useful diagnostic procedure for the definition of childhood eczematous dermatitis and for the identification of agents inducing contact sensitization which is frequently associated with atopic dermatitis. PMID:9496796

  11. Inputs to combination-sensitive neurons in the medial geniculate body of the mustached bat: the missing fundamental.

    PubMed

    Wenstrup, J J; Grose, C D

    1995-06-01

    This study examined projections to combination-sensitive neurons in the medial geniculate body of the mustached bat. These specialized neurons respond to the combination of two temporally and spectrally distinct components of the bat's sonar pulse and echo, encoding target information. Combination-sensitive neurons respond to the bat's sonar fundamental, between 24-31 kHz, in conjunction with a higher harmonic signal. They are thought to be formed in the medial geniculate body (MGB) by convergent input from inferior colliculus representations of 24-31 kHz and higher frequencies. This study used anterograde and retrograde tract-tracing methods in conjunction with physiological recording to test this MGB convergence hypothesis. In anterograde tracing experiments, multiple deposits of two different tracers were placed in the central nucleus of the inferior colliculus (ICC), one tracer in the 24-31 kHz region and another in an ICC representation responding to a higher sonar harmonic. We found only limited overlap in the MGB labeling patterns of the two tracers, and little in many areas where combination-sensitive neurons are common. In retrograde tracing experiments, a single deposit of tracer was placed at a combination-sensitive recording site in the MGB. With the deposit mostly limited to combination-sensitive MGB areas, labeling in 24-31 kHz representations of the ICC was absent or minor. These results suggest that many combination-sensitive neurons in the MGB do not receive 24-31 kHz ICC input. The strongest inputs to combination-sensitive MGB regions originate in high-frequency representations of the ICC and combination-sensitive regions of auditory cortex. Additional projections arrive from the thalamic reticular nucleus, external nucleus of the inferior colliculus, and pericollicular tegmentum. Each projection may contribute to the 24-31 kHz sensitivity of combination-sensitive neurons in the medial geniculate body. PMID:7540682

  12. LISA Telescope Sensitivity Analysis

    NASA Technical Reports Server (NTRS)

    Waluschka, Eugene; Krebs, Carolyn (Technical Monitor)

    2001-01-01

    The results of a LISA telescope sensitivity analysis will be presented, The emphasis will be on the outgoing beam of the Dall-Kirkham' telescope and its far field phase patterns. The computed sensitivity analysis will include motions of the secondary with respect to the primary, changes in shape of the primary and secondary, effect of aberrations of the input laser beam and the effect the telescope thin film coatings on polarization. An end-to-end optical model will also be discussed.

  13. Advanced Doppler tracking experiments

    NASA Technical Reports Server (NTRS)

    Armstrong, J. W.

    1989-01-01

    The Doppler tracking method is currently the only technique available for broadband gravitational wave searches in the approx. 10(exp -4) to 10(exp -1) Hz low frequency band. A brief review is given of the Doppler method, a discussion of the main noise sources, and a review of experience with current spacecraft and the prospects for sensitivity improvements in an advanced Doppler tracking experiment.

  14. Fast Neutron Sensitivity with HPGe

    SciTech Connect

    Seifert, Allen; Hensley, Walter K.; Siciliano, Edward R.; Pitts, W. K.

    2008-01-22

    In addition to being excellent gamma-ray detectors, germanium detectors are also sensitive to fast neutrons. Incident neutrons undergo inelastic scattering {Ge(n,n')Ge*} off germanium nuclei and the resulting excited states emit gamma rays or conversion electrons. The response of a standard 140% high-purity germanium (HPGe) detector with a bismuth germanate (BGO) anti-coincidence shield was measured for several neutron sources to characterize the ability of the HPGe detector to detect fast neutrons. For a sensitivity calculation performed using the characteristic fast neutron response peak that occurs at 692 keV, the 140% germanium detector system exhibited a sensitivity of ~175 counts / kg of WGPumetal in 1000 seconds at a source-detector distance of 1 meter with 4 in. of lead shielding between source and detector. Theoretical work also indicates that it might be possible to use the shape of the fast-neutron inelastic scattering signatures (specifically, the end-point energy of the long high energy tail of the resulting asymmetric peak) to gain additional information about the energy distribution of the incident neutron spectrum. However, the experimentally observed end-point energies appear to be almost identical for each of the fast neutron sources counted. Detailed MCNP calculations show that the neutron energy distributions impingent on the detector for these sources are very similar in this experimental configuration, due to neutron scattering in a lead shield (placed between the neutron source and HPGe detector to reduce the gamma ray flux), the BGO anti-coincidence detector, and the concrete floor.

  15. Social anxiety and alcohol consumption: the role of alcohol expectancies and reward sensitivity.

    PubMed

    Booth, Catherine; Hasking, Penelope

    2009-09-01

    Although the relationship between social anxiety and alcohol consumption has been the subject of extensive exploration, previous studies have failed to draw consistent conclusions about the nature of this relationship. Gray [Gray, J.A. (1970). The psychophysiological basis of introversion-extraversion. Behaviour Research and Therapy, 8, 249-266] suggested that individuals who are sensitive to reward are likely to place themselves in potentially rewarding environments (e.g. pubs and clubs). As such these individuals will have a greater chance to experience and vicariously observe the effects of alcohol in these environments, leading to the formation and modification of alcohol expectancies. Consequently, reinforcement sensitivity theory and alcohol expectancies are inherently related, yet have remained disparate areas of research. In this study, a total of 454 young adults responded to a questionnaire assessing social anxiety, alcohol consumption, reward sensitivity and alcohol expectancies. Regression analyses revealed a positive relationship between reward sensitivity, expectations of tension reduction and increased confidence, and alcohol consumption. Expectations of tension reduction were observed to moderate the relationship between social anxiety and alcohol consumption. In addition, three-way relationships between reward sensitivity, alcohol expectancies and social anxiety were observed to predict alcohol consumption. Overall, these results suggest that both reward sensitivity and alcohol expectancies play a role in the relationship between social anxiety and alcohol consumption, and that inclusion of these constructs in further research may aid in further clarifying the mechanisms underlying comorbid social anxiety and alcohol abuse. PMID:19464809

  16. Silicon on-chip bandpass filters for the multiplexing of high sensitivity photonic crystal microcavity biosensors

    SciTech Connect

    Yan, Hai Zou, Yi; Yang, Chun-Ju; Chakravarty, Swapnajit; Wang, Zheng; Tang, Naimei; Chen, Ray T.; Fan, Donglei

    2015-03-23

    A method for the dense integration of high sensitivity photonic crystal (PC) waveguide based biosensors is proposed and experimentally demonstrated on a silicon platform. By connecting an additional PC waveguide filter to a PC microcavity sensor in series, a transmission passband is created, containing the resonances of the PC microcavity for sensing purpose. With proper engineering of the passband, multiple high sensitivity PC microcavity sensors can be integrated into microarrays and be interrogated simultaneously between a single input and a single output port. The concept was demonstrated with a 2-channel L55 PC biosensor array containing PC waveguide filters. The experiment showed that the sensors on both channels can be monitored simultaneously from a single output spectrum. Less than 3 dB extra loss for the additional PC waveguide filter is observed.

  17. Additional evidence of Mercurian volcanism

    USGS Publications Warehouse

    Trask, N.J.; Strom, R.G.

    1976-01-01

    Evidence concerned with (1) the character and distribution of terrain surrounding fresh basins, (2) albedo, color and temporal differences between a basin rim and smooth plains on its floor, and (3) the stratigraphic relations and local distribution of smooth plains in the hilly and lineated terrain are cited as additional evidence for an internal origin of much of the Mercurian smooth plains. Altough the question of Mercurian volcanism should be kept open, this evidence together with that presented in an earlier paper suggests that volcanism occurred on Mercury early in its history. ?? 1976.

  18. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  19. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  20. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.