The Effects of Adding Elements of Zinc and Magnesium on Ag-Cu Eutectic Alloy for Warming Acupuncture

PubMed Central

Park, Il Song; Kim, Keun Sik; Lee, Min Ho

2013-01-01

The warming acupuncture for hyperthermia therapy is made of STS304. However, its needle point cannot be reached to a desirable temperature due to heat loss caused by low thermal conductivity, and the quantification of stimulation condition and the effective standard establishment of warming acupuncture are required as a heat source. Accordingly, in this study, after Ag-Cu alloys with different composition ratios were casted and then mixed with additives to improve their physical and mechanical properties, the thermal conductivity and biocompatibility of the alloy specimens were evaluated for selecting suitable material. Ag-Cu binary alloys and ternary alloys added 5 wt% Zn or 2 wt% Mg were casted and then cold drawn to manufacture needles for acupuncture, and their physical properties, thermal conductivity, and biocompatibility were evaluated for their potential use in warming acupuncture. The results of this study showed that the physical and mechanical properties of the Ag-Cu alloys were improved by additives and that the thermal conductivity, machinability, and biocompatibility of the Ag-Cu alloys were improved by Mg addition. PMID:24078827

The effects of adding elements of zinc and magnesium on ag-cu eutectic alloy for warming acupuncture.

PubMed

Kim, Yu Kyoung; Park, Il Song; Kim, Keun Sik; Lee, Min Ho

2013-01-01

The warming acupuncture for hyperthermia therapy is made of STS304. However, its needle point cannot be reached to a desirable temperature due to heat loss caused by low thermal conductivity, and the quantification of stimulation condition and the effective standard establishment of warming acupuncture are required as a heat source. Accordingly, in this study, after Ag-Cu alloys with different composition ratios were casted and then mixed with additives to improve their physical and mechanical properties, the thermal conductivity and biocompatibility of the alloy specimens were evaluated for selecting suitable material. Ag-Cu binary alloys and ternary alloys added 5 wt% Zn or 2 wt% Mg were casted and then cold drawn to manufacture needles for acupuncture, and their physical properties, thermal conductivity, and biocompatibility were evaluated for their potential use in warming acupuncture. The results of this study showed that the physical and mechanical properties of the Ag-Cu alloys were improved by additives and that the thermal conductivity, machinability, and biocompatibility of the Ag-Cu alloys were improved by Mg addition.

EVALUATION OF URBANIZATION IMPACTS ON HYDROLOGY - LABORATORY AND FIELD APPROACHES

EPA Science Inventory

Although urbanization has a major impact on watershed hydrology, there have not been many studies to quantify how basic hydrological relationships are altered by the addition of impervious surface under controlled conditions. In addition, few studies have been conducted to quanti...

Ionic Liquid as an Effective Additive for Rechargeable Magnesium Batteries

DOE PAGES

Pan, Baofei; Lau, Ka -Cheong; Vaughey, John T.; ...

2017-03-02

Here, the effect of the addition of an ionic liquid DEME•TFSI to an electrolyte solution of Mg(HMDS) 2-MgCl 2 in THF was studied electrochemically and spectroscopically. Reversible magnesium deposition/dissolution was achieved with the DEME•TFSI-modified electrolyte. This electrolyte shows higher ionic conductivity, and a linear relationship was observed between the ionic conductivity and the concentration of DEME•TFSI in THF solution of Mg(HMDS) 2-MgCl 2. Mg-Mo 6S 8 coin cells have also been successfully cycled using Mg(HMDS) 2-MgCl 2 electrolyte with the addition of DEME•TFSI. Raman and NMR spectroscopy suggest that DEME•TFSI facilitates magnesium deposition/dissolution by improving ionic conductivity of the electrolyte.

Engineering and Modeling Carbon Nanofiller-Based Scaffolds for Tissue Regeneration

NASA Astrophysics Data System (ADS)

Al Habis, Nuha Hamad

Conductive biopolymers are starting to emerge as potential scaffolds of the future. These scaffolds exhibit some unique properties such as inherent conductivity, mechanical and surface properties. Traditionally, a conjugated polymer is used to constitute a conductive network. An alternative method currently being used is nanofillers as additives in the polymer. In this dissertation, we fabricated an intelligent scaffold for use in tissue engineering applications. The main idea was to enhance the mechanical, electrical properties and cell growth of scaffolds by using distinct types of nanofillers such as graphene, carbon nanofiber and carbon black. We identified the optimal concentrations of nano-additive in both fibrous and film scaffolds to obtain the highest mechanical and electrical properties without neglecting any of them. Lastly, we investigated the performance of these scaffold with cell biology. To accomplish these tasks, we first studied the mechanical properties of the scaffold as a function of morphology, concentration and variety of carbon nanofillers. Results showed that there was a gradual increase of the modulus and the fracture strength while using carbon black, carbon nanofiber and graphene, due to the small and strong carbon-to-carbon bonds and the length of the interlayer spacing. Moreover, regardless of the fabrication method, there was an increase in mechanical properties as the concentration of nanofillers increased until a threshold of 7 wt% was reached for the nanofiller film scaffold and 1%wt for the fibrous scaffold. Experimental results of carbon black exhibited a good agreement when compared with data obtained using numerical approaches and analytical models, especially in the case of lower carbon black fractions. Second, we examined the influence of electrical properties of nanofillers based on the concentration and the geometry of carbon nanofillers in the polymer matrix using experimental and numerical simulation approaches. The experimental results showed an increase in conductivity as the amount of nanofiller concentration increased. And regardless of nanofiller type, the trend remained the same. The percolation threshold was around 4-5wt% of nano-additive with PCL and PAN matrices, respectively. However, at the same concentrations, conductivity was higher in graphene-based nanocomposites than for CNF and carbon black-based nanocomposites. The numerical modeling highlighted the effect of nanofillers as constructing a conductive network due to the aggregation phenomenon. The conductivity trend for carbon black and carbon nanofiber-based composites by the numerical simulation approach was similar to the experimental approach. Lastly, we studied the effect of these carbon nanocomposite-based scaffolds on the behavior of cell growth. The results showed that regardless of the scaffold shape (film or fiber) and the additive's type, when the concentration of nano-additives was increased, electrical conductivity and cell density increased also. For a given nano-additive concentration and type, cell density increased in the scaffolds with fiber shape vs. the film. Importantly, as the conductivity of the scaffolds increased, so did the cell density. Consequently, this study has highlighted the close relationship between electrical conductivity, cell density and scaffold orientation. An increase in conductivity can be achieved in two ways: by molecular orientation of the nanofillers or by the appropriate selection of nano-additives such as graphene and carbon nanofiber.

Investigating the effectiveness of using agricultural wastes from empty fruit bunch (EFB), coconut fibre (CF) and sugarcane baggasse (SB) to produce low thermal conductivity clay bricks

NASA Astrophysics Data System (ADS)

Hamzah, Mohamad Hazmi; Deraman, Rafikullah; Saman, Nor Sarwani Mat

2017-12-01

In Malaysia, 45% of the average household electricity was consumed by air conditioners to create an acceptable indoor environment. This high energy consumption was mostly related to poor thermal performance of the building envelope. Therefore, selecting a low thermal conductivity of brick wall was of considerable importance in creating energy efficient buildings. Previously, numerous researchers reported the potential used of agricultural waste as an additive in building materials to enhance their thermal properties. The aim of this study is to examine how agricultural wastes from empty fruit bunch (EFB), coconut fibre (CF) and sugarcane bagasse (SB) can act as additive agents in a fired clay brick manufacturing process to produce a low thermal conductivity clay brick. In this study, these agricultural wastes were individually mixed with clay soil in different proportions ranging from 0%, 2.5%, 5%, 7.5% and 10% by weight. Physical and mechanical properties including soil physical properties, as well as thermal conductivity were performed in accordance with BS 1377: Part 2: 1990, BS 3921: 1985 and ASTM C518. The results reveal that incorporating 5% of EFB as an additive component into the brick making process significantly enhances the production of a low thermal conductivity clay brick as compared to other waste alternatives tested. This finding suggests that EFB waste was a potential additive material to be used for the thermal property enhancement of the building envelope.

Carbon nanomaterials used as conductive additives in lithium ion batteries.

PubMed

Zhang, Qingtang; Yu, Zuolong; Du, Ping; Su, Ce

2010-06-01

As the vital part of lithium ion batteries, conductive additives play important roles in the electrochemical performance of lithium ion batteries. They construct a conductive percolation network to increase and keep the electronic conductivity of electrode, enabling it charge and discharge faster. In addition, conductive additives absorb and retain electrolyte, allowing an intimate contact between the lithium ions and active materials. Carbon nanomaterials are carbon black, Super P, acetylene black, carbon nanofibers, and carbon nanotubes, which all have superior properties such as low weight, high chemical inertia and high specific surface area. They are the ideal conductive additives for lithium ion batteries. This review will discuss some registered patents and relevant papers about the carbon nanomaterials that are used as conductive additives in cathode or anode to improve the electrochemical performance of lithium ion batteries.

Determining the Philosophical Orientation of Pre-Service Teachers: A Causal-Comparative Study

ERIC Educational Resources Information Center

Edlin, Maria L.

2013-01-01

This study was conducted to determine if pre-service teachers could self-identify their philosophy of education and then match that philosophy through their responses to a 48-item survey. Additionally the study was conducted to determine if the pre-service teachers from Middle Tennessee State University would have a more varied philosophical…

Poly(vinylbenzylchloride) Based Anion-Exchange Blend Membranes (AEBMs): Influence of PEG Additive on Conductivity and Stability

PubMed Central

Kerres, Jochen A.; Krieg, Henning M.

2017-01-01

In view of the many possible applications such as fuel cells and electrolysers, recent interest in novel anion exchange membranes (AEMs) has increased significantly. However, their low conductivity and chemical stability limits their current suitability. In this study, the synthesis and characterization of several three- and four-component anion exchange blend membranes (AEBMs) is described, where the compositions have been systematically varied to study the influence of the AEBM’s composition on the anion conductivities as well as chemical and thermal stabilities under strongly alkaline conditions. It was shown that the epoxide-functionalized poly(ethylene glycol)s that were introduced into the four-component AEBMs resulted in increased conductivity as well as a marked improvement in the stability of the AEBMs in an alkaline environment. In addition, the thermal stability of the novel AEBMs was excellent showing the suitability of these membranes for several electrochemical applications. PMID:28621717

Responses of Woody Plant Functional Traits to Nitrogen Addition: A Meta-Analysis of Leaf Economics, Gas Exchange, and Hydraulic Traits.

PubMed

Zhang, Hongxia; Li, Weibin; Adams, Henry D; Wang, Anzhi; Wu, Jiabing; Jin, Changjie; Guan, Dexin; Yuan, Fenghui

2018-01-01

Atmospheric nitrogen (N) deposition has been found to significantly affect plant growth and physiological performance in terrestrial ecosystems. Many individual studies have investigated how N addition influences plant functional traits, however these investigations have usually been limited to a single species, and thereby do not allow derivation of general patterns or underlying mechanisms. We synthesized data from 56 papers and conducted a meta-analysis to assess the general responses of 15 variables related to leaf economics, gas exchange, and hydraulic traits to N addition among 61 woody plant species, primarily from temperate and subtropical regions. Results showed that under N addition, leaf area index (+10.3%), foliar N content (+7.3%), intrinsic water-use efficiency (+3.1%) and net photosynthetic rate (+16.1%) significantly increased, while specific leaf area, stomatal conductance, and transpiration rate did not change. For plant hydraulics, N addition significantly increased vessel diameter (+7.0%), hydraulic conductance in stems/shoots (+6.7%), and water potential corresponding to 50% loss of hydraulic conductivity ( P 50 , +21.5%; i.e., P 50 became less negative), while water potential in leaves (-6.7%) decreased (became more negative). N addition had little effect on vessel density, hydraulic conductance in leaves and roots, or water potential in stems/shoots. N addition had greater effects on gymnosperms than angiosperms and ammonium nitrate fertilization had larger effects than fertilization with urea, and high levels of N addition affected more traits than low levels. Our results demonstrate that N addition has coupled effects on both carbon and water dynamics of woody plants. Increased leaf N, likely fixed in photosynthetic enzymes and pigments leads to higher photosynthesis and water use efficiency, which may increase leaf growth, as reflected in LAI results. These changes appear to have downstream effects on hydraulic function through increases in vessel diameter, which leads to higher hydraulic conductance, but lower water potential and increased vulnerability to embolism. Overall, our results suggest that N addition will shift plant function along a tradeoff between C and hydraulic economies by enhancing C uptake while simultaneously increasing the risk of hydraulic dysfunction.

Effect of deep discharge on the electrochemical behavior of cobalt oxides and oxyhydroxides used as conductive additives in Ni-MH cells

NASA Astrophysics Data System (ADS)

Douin, Myriam; Guerlou-Demourgues, Liliane; Goubault, Lionel; Bernard, Patrick; Delmas, Claude

When used as conductive additive at the positive electrode of Ni-MH batteries, the Na 0.6CoO 2 phase is converted, during the first charge, by oxidation, in a γ-hydrated cobalt oxyhydroxide, which exhibits promising performances. The behavior of these phases was studied in specific deep discharge or low potential storage conditions, through electrochemical short-circuit experiments. The evolution of the electrodes during the cycling was followed by X-ray diffraction and SEM analysis. These novel additives appear to be more efficient in these extreme conditions than the CoO or Co(OH) 2 additives, commonly used in industrial devices.

21 CFR 99.305 - Exemption from the requirement to file a supplemental application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... are not less expensive ways to obtain the needed information; or (2) It would be unethical to conduct... would be unethical to conduct clinical studies, the agency shall consider, in addition to the...

Concurrent adversities among adolescents with conduct problems: the NAAHS study.

PubMed

Reigstad, Bjørn; Kvernmo, Siv

2016-10-01

Several studies have confirmed that maltreatment and abuse in childhood are related to conduct problems. Less is known about such relationships with concurrent adversities in adolescence and, also, when compared with other severe adversities and possible multiple additive effects. The study encompassed a community population of 4881 adolescents 15-16 years of age 50.1 % boys and 49.9 % girls. Youth with and without conduct problem scores within the deviant range on the Strength and Difficulties Questionnaire (SDQ) was compared on 12 concurrent adversities. Based on self-reports, 4.4 % of the adolescents had conduct problem scores within the deviant range and more girls (5.1 %) than boys (3.7 %). In the deviant conduct problem group, 65.1 % had experienced two or more concurrent adversities compared with 26.3 % of youths in the non-deviant group (OR 5.23, 95 % CI 3.91-7.01). Likewise, the deviant conduct problem group was from 1.71 to 8.43 times more at the risk of experiencing the different adversities. Parental mental health problems and experiences of violence were multivariately strongest associated with conduct problem scores within the deviant range on the SDQ. A strong multiple additive relationship with adversities was found. Two-thirds of youth with SDQ conduct problem scores within the deviant range reported two or more concurrent adversities. Clinicians should seek information about kinds and amount of possible traumatic adversities in youth with conduct problems and offer evidence based treatment.

Working with Families: Promising Programs To Help Parents Support Young Children's Learning. Summary of Findings. Final Report.

ERIC Educational Resources Information Center

Goodson, Barbara Dillon; And Others

This report presents the findings of a study conducted for the U.S. Department of Education that analyzed 17 family education programs for disadvantaged families. In-depth studies were conducted on-site for 7 programs; an additional 10 programs were studied via telephone interviews. An "Executive Summary" of eleven pages (also separately…

Simultaneous measurement for thermal conductivity, diffusivity, and specific heat of methane hydrate bearing sediments recovered from Nankai-Trough wells

NASA Astrophysics Data System (ADS)

Muraoka, M.; Ohtake, M.; Susuki, N.; Yamamoto, Y.; Suzuki, K.; Tsuji, T.

2014-12-01

This study presents the results of the measurements of the thermal constants of natural methane-hydrate-bearing sediments samples recovered from the Tokai-oki test wells (Nankai-Trough, Japan) in 2004. The thermal conductivity, thermal diffusivity, and specific heat of the samples were simultaneously determined using the hot-disk transient method. The thermal conductivity of natural hydrate-bearing sediments decreases slightly with increasing porosity. In addition, the thermal diffusivity of hydrate-bearing sediment decrease as porosity increases. We also used simple models to calculate the thermal conductivity and thermal diffusivity. The results of the distribution model (geometric-mean model) are relatively consistent with the measurement results. In addition, the measurement results are consistent with the thermal diffusivity, which is estimated by dividing the thermal conductivity obtained from the distribution model by the specific heat obtained from the arithmetic mean. In addition, we discuss the relation between the thermal conductivity and mineral composition of core samples in conference. Acknowledgments. This work was financially supported by MH21 Research Consortium for Methane Hydrate Resources in Japan on the National Methane Hydrate Exploitation Program planned by the Ministry of Economy, Trade and Industry.

Continuing oversight through site monitoring: experiences of an institutional ethics committee in an Indian tertiary-care hospital.

PubMed

Shetty, Yashashri C; Marathe, Padmaja; Kamat, Sandhya; Thatte, Urmila

2012-01-01

WHO-TDR and the Indian Council of Medical Research recommend site visits by institutional ethics committees (IECs) for continued oversight, to ensure the ethical conduct of research. Our IEC conducted seven site visits in 2008-2009 using a standardised format to monitor adherence to protocol and the informed consent process. The study identified issues related to informed consent (6/7), deviation from protocol (5/7), reporting of study progress to the IEC (3/7), recruiting additional participants without IEC approval (2/7), reporting of serious adverse events (1/7), investigator's lack of awareness of protocol and the informed consent document (2/7) and other findings. Investigators were informed about the findings and were asked to submit an explanation. The IEC issued warnings about not repeating such lapses in the future (5/7), restricted enrollment of new participants (2/7), recommended continued good clinical practice training to the study team (4/7), advised the recruitment of additional study coordinators (2/7), and requested the submission of adverse event reports (2/7) or sponsors' audit reports (2/7). Our study showed that the ethical conduct of studies can be ensured by conducting routine site monitoring.

The Shozu Herpes Zoster (SHEZ) study: rationale, design, and description of a prospective cohort study.

PubMed

Takao, Yukiko; Miyazaki, Yoshiyuki; Onishi, Fumitake; Kumihashi, Hideaki; Gomi, Yasuyuki; Ishikawa, Toyokazu; Okuno, Yoshinobu; Mori, Yasuko; Asada, Hideo; Yamanishi, Koichi; Iso, Hiroyasu

2012-01-01

The incidence and risk factors for herpes zoster have been studied in cross-sectional and cohort studies, although most such studies have been conducted in Western countries. Evidence from Asian populations is limited, and no cohort study has been conducted in Asia. We are conducting a 3-year prospective cohort study in Shozu County in Kagawa Prefecture, Japan to determine the incidence and predictive and immunologic factors for herpes zoster among Japanese. The participants are followed for 3 years, and a telephone survey is conducted every 4 weeks. The participants were assigned to 1 of 3 studies. Participants in study A gave information on past history of herpes zoster and completed health questionnaires. Study B participants additionally underwent varicella-zoster virus (VZV) skin testing, and study C participants additionally underwent blood testing. If the participants develop herpes zoster, we evaluate clinical symptoms, measure cell-mediated immunity and humoral immunity using venous blood sampling, photograph skin areas with rash, conduct virus identification testing by polymerase chain reaction (PCR) and virus isolation from crust sampling, and evaluate postherpetic pain. We recruited 12 522 participants aged 50 years or older in Shozu County from December 2009 through November 2010. The participation rate was 65.7% of the target population. The present study is likely to provide valuable data on the incidence and predictive and immunologic factors for herpes zoster in a defined community-based population of Japanese.

The Shozu Herpes Zoster (SHEZ) Study: Rationale, Design, and Description of a Prospective Cohort Study

PubMed Central

Takao, Yukiko; Miyazaki, Yoshiyuki; Onishi, Fumitake; Kumihashi, Hideaki; Gomi, Yasuyuki; Ishikawa, Toyokazu; Okuno, Yoshinobu; Mori, Yasuko; Asada, Hideo; Yamanishi, Koichi; Iso, Hiroyasu

2012-01-01

Background The incidence and risk factors for herpes zoster have been studied in cross-sectional and cohort studies, although most such studies have been conducted in Western countries. Evidence from Asian populations is limited, and no cohort study has been conducted in Asia. We are conducting a 3-year prospective cohort study in Shozu County in Kagawa Prefecture, Japan to determine the incidence and predictive and immunologic factors for herpes zoster among Japanese. Methods The participants are followed for 3 years, and a telephone survey is conducted every 4 weeks. The participants were assigned to 1 of 3 studies. Participants in study A gave information on past history of herpes zoster and completed health questionnaires. Study B participants additionally underwent varicella-zoster virus (VZV) skin testing, and study C participants additionally underwent blood testing. If the participants develop herpes zoster, we evaluate clinical symptoms, measure cell-mediated immunity and humoral immunity using venous blood sampling, photograph skin areas with rash, conduct virus identification testing by polymerase chain reaction (PCR) and virus isolation from crust sampling, and evaluate postherpetic pain. Results We recruited 12 522 participants aged 50 years or older in Shozu County from December 2009 through November 2010. The participation rate was 65.7% of the target population. Conclusions The present study is likely to provide valuable data on the incidence and predictive and immunologic factors for herpes zoster in a defined community-based population of Japanese. PMID:22343323

Effect of ca+2 addition on the properties of ce0.8gd0.2o2-δ for it-sofc

NASA Astrophysics Data System (ADS)

Koteswararao, P.; Buchi Suresh, M.; Wani, B. N.; Bhaskara Rao, P. V.; Varalaxmi, P.

2018-03-01

This paper reports the effect of Ca2+ addition on the structural and electrical properties of Ce0.8Gd0.2O2-δ(GDC) electrolyte for low temperature solid oxide fuel cell application. The Ca (0, 0.5, 1 and 2 mol %) doped GDC solid electrolytes have been prepared by solid state method. The sintered densities of the samples are greater than 95%. XRD study reveals the cubic fluorite structure. The microstructure of the samples sintered at 1400°C resulted into grain sizes in the range of 1.72 to 10.20 μm. Raman spectra show the presence of GDC single phase. AC impedance analysis is used to measure the ionic conductivity of the electrolyte. Among all the compositions, the highest conductivity is observed in the GDC sample with 0.5 mol% Ca addition. Nyquist plots resulted in multiple redoxation process such as grain and grain boundary conductions to final conductivity. Estimated blocking factor is lower for the GDC electrolyte with 0.5mol% Ca, indicating that Ca addition was promoted grain boundary conduction. Activation energies were calculated from Arrhenius plot and are found in the range of 1eV.

Anisotropic optical response of optically opaque elastomers with conductive fillers as revealed by terahertz polarization spectroscopy

PubMed Central

Okano, Makoto; Watanabe, Shinichi

2016-01-01

Elastomers are one of the most important materials in modern society because of the inherent viscoelastic properties due to their cross-linked polymer chains. Their vibration-absorbing and adhesive properties are especially useful and thus utilized in various applications, for example, tires in automobiles and bicycles, seismic dampers in buildings, and seals in a space shuttle. Thus, the nondestructive inspection of their internal states such as the internal deformation is essential in safety. Generally, industrial elastomers include various kinds of additives, such as carbon blacks for reinforcing them. The additives make most of them opaque in a wide spectral range from visible to mid-infrared, resulting in that the nondestructive inspection of the internal deformation is quite difficult. Here, we demonstrate transmission terahertz polarization spectroscopy as a powerful technique for investigating the internal optical anisotropy in optically opaque elastomers with conductive additives, which are transparent only in the terahertz frequency region. The internal deformation can be probed through the polarization changes inside the material due to the anisotropic dielectric response of the conductive additives. Our study about the polarization-dependent terahertz response of elastomers with conductive additives provides novel knowledge for in situ, nondestructive evaluation of their internal deformation. PMID:28008942

Beyond the Call of Duty: A Qualitative Study of Teachers' Additional Responsibilities Related to Sexuality Education

ERIC Educational Resources Information Center

Eisenberg, Marla E.; Madsen, Nikki; Oliphant, Jennifer A.; Resnick, Michael

2011-01-01

Seven focus groups were conducted with sexuality educators in Minnesota to explore ways that teaching sexuality education differs from teaching other health education content and to determine if additional supports or resources are needed for sexuality educators. Teachers described many specific additional responsibilities or concerns related to…

Open graded friction courses for HMA pavements.

DOT National Transportation Integrated Search

2013-12-01

A laboratory study was conducted to evaluate OGFC mixtures meeting current Mississippi specifications. In addition, materials included a second 12.5 mm gradation and an asphalt rubber binder. The additional 12.5mm gradation was selected to evaluate a...

Rhizaspidiotus Donacis (Hemiptera, Diaspididae) Licensed Agent for control. First Results of Biological Monitoring Plan of Giant Reed in the U.S.

USDA-ARS?s Scientific Manuscript database

Field research studies in Spain conducted to determine the biology of the arundo scale, Rhizaspidiotus donacis, were consistent with laboratory studies conducted in the U.S. Although field data from Spain indicate that the arundo scale can significantly impact giant reed, Arundo donax, additional ti...

Umpqua Community College: Its Economic Impact on Douglas County.

ERIC Educational Resources Information Center

Haugen, Roger E.

A study was conducted to assess the additional monies in circulation within Douglas County due to the existence of Umpqua Community College (UCC). Direct and indirect economic impact was calculated for the 1980-81 fiscal year based on UCC records and staff and student surveys conducted during February 1982. Study findings included the following:…

Second Language Writing and Bidialectalism: A Case for African American Student Writers

ERIC Educational Resources Information Center

DePolo, Jason

2017-01-01

There has been much research conducted on second language writing. In addition, there exists a significant amount of studies conducted with African American student writers. However, the fields of Second Language Writing and Composition Studies rarely if ever dovetail in the research literature. The purpose of this article is to argue how English…

Adult Learners' Knowledge of Fraction Addition and Subtraction

ERIC Educational Resources Information Center

Muckridge, Nicole A.

2017-01-01

The purpose of this study was to examine adult developmental mathematics (ADM) students' knowledge of fraction addition and subtraction as it relates to their demonstrated fraction schemes and ability to disembed in multiplicative contexts with whole numbers. The study was conducted using a mixed methods sequential explanatory design. In the first…

Limitations of dormant conduction as a predictor of atrial fibrillation recurrence and pulmonary vein reconnection after catheter ablation.

PubMed

Lin, Frank S; Ip, James E; Markowitz, Steven M; Liu, Christopher F; Thomas, George; Lerman, Bruce B; Cheung, Jim W

2015-05-01

Adenosine (ADO) can uncover dormant conduction following pulmonary vein (PV) isolation. We sought to identify the value of dormant conduction for predicting atrial fibrillation (AF) recurrence and chronic PV reconnection. One hundred fifty-two patients (80 male; age 60 ± 11 years) undergoing PV isolation for AF were studied. After PV isolation, sites of ADO-induced PV reconnection were recorded and targeted with additional ablation. In patients undergoing repeat ablation for recurrent AF, chronic PV reconnection was assessed. Forty-five (30%) patients had ADO-induced PV reconnection following PV isolation. Dormant conduction was successfully eliminated with additional ablation in 41 (91%) of these patients. After follow-up of 598 ± 270 days, 60 (39%) patients had recurrent AF. Dormant PV conduction was not a significant predictor of AF recurrence (hazard ratio 1.51; 95% confidence interval: 0.89-2.56; P = 0.12) although three of four (75%) patients with residual dormant conduction following initial ablation developed recurrent AF. Twenty-six patients with recurrent AF underwent repeat ablation with 52 of 99 (53%) PVs found to have chronic reconnection. Nine of 11 (82%) PVs with dormant conduction and 43 of 88 (49%) PVs without dormant conduction at initial procedure had chronic reconnection at repeat ablation. When additional ablation is performed to eliminate ADO-induced PV reconnection after PV isolation, dormant conduction is not a significant predictor of recurrent AF. Although PVs with dormant conduction at initial procedure may develop chronic reconnection, the majority of PVs that show conduction recovery at repeat ablation occur in nondormant PVs. © 2015 Wiley Periodicals, Inc.

Long life feasibility study for the shuttle infrared telescope facility

NASA Technical Reports Server (NTRS)

1985-01-01

A study was conducted to assess the feasibility of designing an Infrared Telescope of the 1 meter class which would operate effectively as a Shuttleborne, 14-day Spacelab payload and then be adapted with little modification to work as a 6 month Space station or free flyer payload. The optics configuration and requirements from a previous study were used without modification. In addition, an enhancement to 2 year mission lengths was studied. The cryogenic system selected was a hybrid design with an internal solid Hydrogen tank at 8 Kelvin and an internal superfluid tank at 2K. In addition to the cryogenic design, a detailed look at secondary mirror actuators for chopping, focus and decenter was conducted and analysis and cryo test reported.

Conductivity and transport studies of plasticized chitosan-based proton conducting biopolymer electrolytes

NASA Astrophysics Data System (ADS)

Shukur, M. F.; Yusof, Y. M.; Zawawi, S. M. M.; Illias, H. A.; Kadir, M. F. Z.

2013-11-01

This paper focuses on the conductivity and transport properties of chitosan-based solid biopolymer electrolytes containing ammonium thiocyanate (NH4SCN). The sample containing 40 wt% NH4SCN exhibited the highest conductivity value of (1.81 ± 0.50) × 10-4 S cm-1 at room temperature. Conductivity has increased to (1.51 ± 0.12) × 10-3 S cm-1 with the addition of 25 wt% glycerol. The temperature dependence of conductivity for both salted and plasticized systems obeyed the Arrhenius rule. The activation energy (Ea) was calculated for both systems and it is found that the sample with 40 wt% NH4SCN in the salted system obtained an Ea value of 0.148 eV and that for the sample containing 25 wt% glycerol in the plasticized system is 0.139 eV. From the Fourier transform infrared studies, carboxamide and amine bands shifted to lower wavenumbers, indicating that chitosan has interacted with NH4SCN salt. Changes in the C-O stretching vibration band intensity are observed at 1067 cm-1 with the addition of glycerol. The Rice and Roth model was used to explain the transport properties of the salted and plasticized systems.

Contour plot assessment of existing meta-analyses confirms robust association of statin use and acute kidney injury risk.

PubMed

Chevance, Aurélie; Schuster, Tibor; Steele, Russell; Ternès, Nils; Platt, Robert W

2015-10-01

Robustness of an existing meta-analysis can justify decisions on whether to conduct an additional study addressing the same research question. We illustrate the graphical assessment of the potential impact of an additional study on an existing meta-analysis using published data on statin use and the risk of acute kidney injury. A previously proposed graphical augmentation approach is used to assess the sensitivity of the current test and heterogeneity statistics extracted from existing meta-analysis data. In addition, we extended the graphical augmentation approach to assess potential changes in the pooled effect estimate after updating a current meta-analysis and applied the three graphical contour definitions to data from meta-analyses on statin use and acute kidney injury risk. In the considered example data, the pooled effect estimates and heterogeneity indices demonstrated to be considerably robust to the addition of a future study. Supportingly, for some previously inconclusive meta-analyses, a study update might yield statistically significant kidney injury risk increase associated with higher statin exposure. The illustrated contour approach should become a standard tool for the assessment of the robustness of meta-analyses. It can guide decisions on whether to conduct additional studies addressing a relevant research question. Copyright © 2015 Elsevier Inc. All rights reserved.

The Impact of Coexisting Emotional and Conduct Problems on Family Functioning and Quality of Life Among Adolescents With ADHD.

PubMed

Schei, Jorun; Jozefiak, Thomas; Nøvik, Torunn Stene; Lydersen, Stian; Indredavik, Marit S

2016-05-01

The aim of this study was to assess the impact of self-reported emotional and conduct problems on family functioning and quality of life (QoL) among adolescents with ADHD. The ADHD group (N = 194) was divided into the following groups: without additional emotional or conduct problems, with emotional problems, with conduct problems, and with both problem types. The cross-sectional study included parent and adolescent reports. Adolescents with ADHD and both problem types reported significantly lower QoL and family functioning than all other ADHD groups. Parents reported better QoL for the ADHD group without additional problems, but similar family functioning for all groups. A higher level of coexisting psychiatric problems had a significant impact on adolescents' reports of family functioning and QoL. However, coexisting problems showed no association with parent reports of family functioning. Adolescents with ADHD might add important information in clinical assessment. © The Author(s) 2013.

Analysis of the error of the developed method of determination the active conductivity reducing the insulation level between one phase of the network and ground, and insulation parameters in a non-symmetric network with isolated neutral with voltage above 1000 V

NASA Astrophysics Data System (ADS)

Utegulov, B. B.

2018-02-01

In the work the study of the developed method was carried out for reliability by analyzing the error in indirect determination of the insulation parameters in an asymmetric network with an isolated neutral voltage above 1000 V. The conducted studies of the random relative mean square errors show that the accuracy of indirect measurements in the developed method can be effectively regulated not only by selecting a capacitive additional conductivity, which are connected between phases of the electrical network and the ground, but also by the selection of measuring instruments according to the accuracy class. When choosing meters with accuracy class of 0.5 with the correct selection of capacitive additional conductivity that are connected between the phases of the electrical network and the ground, the errors in measuring the insulation parameters will not exceed 10%.

Safety pharmacology investigations in toxicology studies: an industry survey.

PubMed

Authier, Simon; Vargas, Hugo M; Curtis, Michael J; Holbrook, Mark; Pugsley, Michael K

2013-01-01

The Safety Pharmacology (SP) Society (SPS) conducted an industry survey in 2012 in an attempt to define current industry practices as they relate to inclusion of safety pharmacology (SP) endpoints into Toxicology studies. A total of 361 participants from Asia (9.1%), Europe (19.4%) and North America (71.4%) responded to the survey. The preponderance of respondents were toxicologists (53.2%) followed by safety pharmacologists (27.2%) and scientists involved in the conduct of both disciplines (19.6%). Most participants (58.6%) were from pharmaceutical companies employing more than 500 employees. A majority (68.2%) reported having experience in designing, performing or interpreting the SP component of a study when performed as part of a toxicology study. Some participants (42.0%) had submitted data to a regulatory agency where ICHS7 studies were performed as part of a toxicology study rather than as a standalone study. When comparing species that were used in studies in which SP was added to toxicology studies, canines were the most frequently reported animals used for new chemical entities (NCE) whereas non-human (NH) primates were the most frequent for the assessment of biological agents. The most frequent primary motivator for adding ICHS7 SP endpoints to regulatory toxicology studies was to generate additional data to allow for determination of an integrated risk assessment thereby testing Confidence in Safety (CIS) to better manage and/or mitigate risk. The current ability to add safety pharmacology endpoints into regulatory toxicology studies was used to address a specific concern (by 42.1% of respondents) to allow management of risk more effectively (36.8%) or to generate data that contributes to cessation of the progression of a compound (21.1%). For an NCE, SP measurements in toxicology studies were conducted in addition to standalone SP studies (by 40.6% of respondents) or in addition/instead of standalone safety pharmacology studies (by 39.8% of respondents). For biological agents, a majority (74.3%) indicated SP measurements in toxicology were conducted instead of standalone studies as outlined in the ICHS6 guideline while inclusion of SP endpoints in toxicology studies for biological agents in addition to standalone studies was reported by only 25.7% of the respondents. The survey highlights that obtaining regulatory agreement for the proposed combined SP/Tox study designs may be useful before study conduct in some cases. Respondents suggest that such discussion could occur at the pre-IND meeting before the IND/CTA enabling program. Copyright © 2013 Elsevier Inc. All rights reserved.

Conductivity studies of Chitosan doped with different ammonium salts: Effect of ion size

NASA Astrophysics Data System (ADS)

Mohan, C. Raja; Senthilkumar, M.; Jayakumar, K.

2015-06-01

In the present investigation influence of ion size on the electrical properties of various ammonium salts of various concentrations doped with Chitosan liquid electrolyte has been studied. The attachment of ammonium salts with Chitosan has been confirmed through FTIR Spectrum. Polarizability is calculated from the refractive index data. Addition of ammonium salts increases the conductivity. It is also observed that increase in ion size, increases the ionic conductivity due to increase in amorphous nature of the material. Increase in concentration leads to increase in conductivity due to the presence of more number of free ions.

Simultaneously Enhancing the Cohesion and Electrical Conductivity of PEDOT:PSS Conductive Polymer Films using DMSO Additives.

PubMed

Lee, Inhwa; Kim, Gun Woo; Yang, Minyang; Kim, Taek-Soo

2016-01-13

Conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PSS) has attracted significant attention as a hole transport and electrode layer that substitutes metal electrodes in flexible organic devices. However, its weak cohesion critically limits the reliable integration of PSS in flexible electronics, which highlights the importance of further investigation of the cohesion of PSS. Furthermore, the electrical conductivity of PSS is insufficient for high current-carrying devices such as organic photovoltaics (OPVs) and organic light emitting diodes (OLEDs). In this study, we improve the cohesion and electrical conductivity through adding dimethyl sulfoxide (DMSO), and we demonstrate the significant changes in the properties that are dependent on the wt % of DMSO. In particular, with the addition of 3 wt % DMSO, the maximum enhancements for cohesion and electrical conductivity are observed where the values increase by 470% and 6050%, respectively, due to the inter-PEDOT bridging mechanism. Furthermore, when OLED devices using the PSS films are fabricated using the 3 wt % DMSO, the display exhibits 18% increased current efficiency.

Impact of Legislation on Post-School Transition Practice for Young People with Additional Support Needs in Scotland

ERIC Educational Resources Information Center

Richardson, Thomas D.; Jindal-Snape, Divya; Hannah, Elizabeth F. S.

2017-01-01

A longitudinal study was conducted to understand post-school transition practice for young people with additional support needs (ASN) before and after the implementation of key legislation, the Education (Additional Support for Learning) (Scotland) Act 2004, amended in 2009. Primary data were collected from one local authority in Scotland. Twelve…

Remote lift fan study program, volume 4

NASA Technical Reports Server (NTRS)

1973-01-01

A study program to select and conduct preliminary design of advanced technology lift fan systems to meet low noise goals of future V/STOL transport aircraft is discussed. This volume contains results of additional studies conducted to support the main preliminary design effort done under the Remote Lift Fan Study Program (Contract NAS3-14406) and a companion effort, the Integral Lift Fan Study (NAS3-14404). These results cover engine emission study, a review of existing engines for research aircraft application and support data for aircraft studies.

Additional EIPC Study Analysis: Interim Report on Medium Priority Topics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadley, Stanton W.; Gotham, Douglas J.

Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a stakeholder steering committee (SSC) that included representatives from the Eastern Interconnection States’ Planning Council (EISPC) among others, the project was conducted in two phases. The first was a 2015–2040 analysis that looked at a broad array of possible future scenarios, while the second focused on a more detailed examination of the grid in 2030. The studies provided a wealth of information on possible future generation, demand, and transmission alternatives. However, at the conclusionmore » there were still unresolved questions and issues. The US Department of Energy, which had sponsored the study, asked Oak Ridge National Laboratory researchers and others who worked on the project to conduct an additional study of the data to provide further insights for stakeholders and the industry. This report documents the second part of that follow-on study [an earlier report (Hadley 2013) covered the first part, and a subsequent report will address the last part].« less

Preliminary result on the enhancement of Ufer electrodes using recycle additives materials

NASA Astrophysics Data System (ADS)

Zulkifli, Muhammad Haziq Aniq Bin; Ahmad, Hussein Bin

2016-11-01

Ground building pillars is to be used as ground rod. The pillars are design, fabricated, and formulated with new ground fillers. The additives will be used from recycle waste materials mainly from the palm oil plant process. Micro scale building pillars will be fabricated and install in the test ground at all of the location. Earth tester meter are used to measure and collect the data of the soil resistivity when the research is conducted. In collecting these data, 3-terminal methods are used to carry the measurements. This experiment will be conducted for 30 weeks and regular measurements at the test ground copper grids will be conducted to measure the ground electrode resistance. The study will mainly base on IEC 62503-3. The used of reinforcing rods and mixture of recycle additives could produce a better grounding system that are suitable and can be used in all kind of soil condition and large industries.

Influence of red wine fermentation oenological additives on inoculated strain implantation.

PubMed

Duarte, Filomena L; Alves, Ana Claudia; Alemão, Maria Filomena; Baleiras-Couto, M Margarida

2013-06-01

Pure selected cultures of Saccharomyces cerevisiae starters are regularly used in the wine industry. A survey of S. cerevisiae populations during red wine fermentations was performed in order to evaluate the influence of oenological additives on the implantation of the inoculated strain. Pilot scale fermentations (500 L) were conducted with active dry yeast (ADY) and other commercial oenological additives, namely two commercial fermentation activators and two commercial tannins. Six microsatellite markers were used to type S. cerevisiae strains. The methodology proved to be very discriminating as a great diversity of wild strains (48 genotypes) was detected. Statistical analysis confirmed a high detection of the inoculated commercial strain, and for half the samples an effective implantation of ADY (over 80 %) was achieved. At late fermentation time, ADY strain implantation in fermentations conducted with commercial additives was lower than in the control. These results question the efficacy of ADY addition in the presence of other additives, indicating that further studies are needed to improve knowledge on oenological additives' use.

Enhanced performance of starter lighting ignition type lead-acid batteries with carbon nanotubes as an additive to the active mass

NASA Astrophysics Data System (ADS)

Marom, Rotem; Ziv, Baruch; Banerjee, Anjan; Cahana, Beni; Luski, Shalom; Aurbach, Doron

2015-11-01

Addition of various carbon materials into lead-acid battery electrodes was studied and examined in order to enhance the power density, improve cycle life and stability of both negative and positive electrodes in lead acid batteries. High electrical-conductivity, high-aspect ratio, good mechanical properties and chemical stability of multi-wall carbon nanotubes (MWCNT, unmodified and mofified with carboxylic groups) position them as viable additives to enhance the electrodes' electrical conductivity, to mitigate the well-known sulfation failure mechanism and improve the physical integration of the electrodes. In this study, we investigated the incorporation-effect of carbon nanotubes (CNT) to the positive and the negative active materials in lead-acid battery prototypes in a configuration of flooded cells, as well as gelled cells. The cells were tested at 25% and 30% depth-of-discharge (DOD). The positive effect of the carbon nanotubes (CNT) utilization as additives to both positive and negative electrodes of lead-acid batteries was clearly demonstrated and is explained herein based on microscopic studies.

Lack of genotoxicity in vivo for food color additive Allura Red AC.

PubMed

Bastaki, Maria; Farrell, Thomas; Bhusari, Sachin; Pant, Kamala; Kulkarni, Rohan

2017-07-01

Allura Red AC is an approved food color additive internationally with INS number 129, in the United States as food color subject to batch certification "Food, Drug, and Cosmetic" (FD&C) Red No. 40, and in Europe as food color additive with E number 129. In their evaluation of the color (2013), the European Food Safety Authority (EFSA) expressed concerns of potential genotoxicity, based primarily on one genotoxicity study that was not conducted according to Guidelines. The present in vivo genotoxicity study was conducted according to OECD Guidelines in response to EFSA's request for additional data. The animal species and strain, and the tissues examined were selected specifically to address the previously reported findings. The results show clear absence of genotoxic activity for Allura Red AC, in the bone marrow micronucleus assay and the Comet assay in the liver, stomach, and colon. These data addressed EFSA's concerns for genotoxicity. The Joint WHO/FAO Committee on Food Additives (JECFA) (2016) also reviewed the study and concluded that there is no genotoxicity concern for Allura Red AC. Negative findings in parallel genotoxicity studies on Tartrazine and Ponceau 4R (published separately) are consistent with lack of genotoxicity for azo dyes used as food colors. Copyright © 2017 Elsevier Ltd. All rights reserved.

Lack of genotoxicity in vivo for food color additive Tartrazine.

PubMed

Bastaki, Maria; Farrell, Thomas; Bhusari, Sachin; Pant, Kamala; Kulkarni, Rohan

2017-07-01

Tartrazine is approved as a food color additive internationally with INS number 102, in the United States as food color subject to batch certification "Food, Drug, and Cosmetic" (FD&C) Yellow No. 5, and in Europe as food color additive with E number 102. In their evaluation of the color (2013), the European Food Safety Authority (EFSA) expressed concerns of potential genotoxicity, based primarily on one genotoxicity study that was not conducted according to Guidelines. The present in vivo genotoxicity study was conducted according to OECD Guidelines in response to EFSA's request for additional data. The animal species and strain, and the tissues examined were selected specifically to address the previously reported findings. The results of this study show clear absence of genotoxic activity for Tartrazine, in the bone marrow micronucleus assay and the Comet assay in the liver, stomach, and colon. These data addressed EFSA's concerns for genotoxicity. The Joint WHO/FAO Committee on Food Additives (JECFA) (2016) also reviewed these data and concluded that there is no genotoxicity concern for Tartrazine. Negative findings in parallel genotoxicity studies on Allura Red AC and Ponceau 4R (published separately) are consistent with lack of genotoxicity for azo dyes used as food colors. Copyright © 2017 Elsevier Ltd. All rights reserved.

Additive Partial Least Squares for efficient modelling of independent variance sources demonstrated on practical case studies.

PubMed

Luoma, Pekka; Natschläger, Thomas; Malli, Birgit; Pawliczek, Marcin; Brandstetter, Markus

2018-05-12

A model recalibration method based on additive Partial Least Squares (PLS) regression is generalized for multi-adjustment scenarios of independent variance sources (referred to as additive PLS - aPLS). aPLS allows for effortless model readjustment under changing measurement conditions and the combination of independent variance sources with the initial model by means of additive modelling. We demonstrate these distinguishing features on two NIR spectroscopic case-studies. In case study 1 aPLS was used as a readjustment method for an emerging offset. The achieved RMS error of prediction (1.91 a.u.) was of similar level as before the offset occurred (2.11 a.u.). In case-study 2 a calibration combining different variance sources was conducted. The achieved performance was of sufficient level with an absolute error being better than 0.8% of the mean concentration, therefore being able to compensate negative effects of two independent variance sources. The presented results show the applicability of the aPLS approach. The main advantages of the method are that the original model stays unadjusted and that the modelling is conducted on concrete changes in the spectra thus supporting efficient (in most cases straightforward) modelling. Additionally, the method is put into context of existing machine learning algorithms. Copyright © 2018 Elsevier B.V. All rights reserved.

Lake Michigan lake trout PCB model forecast post audit (oral presentation)

EPA Science Inventory

Scenario forecasts for total PCBs in Lake Michigan (LM) lake trout were conducted using the linked LM2-Toxics and LM Food Chain models, supported by a suite of additional LM models. Efforts were conducted under the Lake Michigan Mass Balance Study and the post audit represents an...

Lake Michigan lake trout PCB model forecast post audit

EPA Science Inventory

Scenario forecasts for total PCBs in Lake Michigan (LM) lake trout were conducted using the linked LM2-Toxics and LM Food Chain models, supported by a suite of additional LM models. Efforts were conducted under the Lake Michigan Mass Balance Study and the post audit represents th...

Cumulative Effects of In Utero Administration of Mixtures of Reproductive Toxicants that Disrupt Common Target Tissues via Diverse Mechanisms of Toxicity

PubMed Central

Rider, Cynthia V.; Furr, Johnathan R.; Wilson, Vickie S.; Gray, L. Earl

2010-01-01

Although risk assessments are typically conducted on a chemical-by-chemical basis, the 1996 Food Quality Protection Act required the US Environmental Protection Agency to consider cumulative risk of chemicals that act via a common mechanism of toxicity. To this end, we are conducting studies with mixtures of chemicals to elucidate mechanisms of joint action at the systemic level with the end goal of providing a framework for assessing the cumulative effects of reproductive toxicants. Previous mixture studies conducted with antiandrogenic chemicals are reviewed briefly and two new studies are described in detail. In all binary mixture studies, rats were dosed during pregnancy with chemicals, singly or in pairs at dosage levels equivalent to approximately one half of the ED50 for hypospadias or epididymal agenesis. The binary mixtures included: androgen receptor (AR) antagonists (vinclozolin plus procymidone), phthalate esters (DBP plus BBP and DEHP plus DBP), a phthalate ester plus an AR antagonist (DBP plus procymidone), a mixed mechanism androgen signaling disruptor (linuron) plus BBP, and two chemicals which disrupt epididymal differentiation through entirely different toxicity pathways: DBP (AR pathway) plus 2,3,7,8 TCDD (AhR pathway). We also conducted multi-component mixture studies combining several “antiandrogens” together. In the first study, seven chemicals (four pesticides and three phthalates) that elicit antiandrogenic effects at two different sites in the androgen signaling pathway (i.e. AR antagonist or inhibition of androgen synthesis) were combined. In the second study, three additional phthalates were added to make a ten chemical mixture. In both the binary mixture studies and the multi-component mixture studies, chemicals that targeted male reproductive tract development displayed cumulative effects that exceeded predictions based upon a response addition model and most often were in accordance with predictions based upon dose addition models. In summary, our results indicate that compounds that act by disparate mechanisms of toxicity to disrupt the dynamic interactions among the interconnected signaling pathways in differentiating tissues produce cumulative dose-additive effects, regardless of the mechanism or mode of action of the individual mixture component. PMID:20487044

SOLID SOLUTION EFFECTS ON THE THERMAL PROPERTIES IN THE MgAl2O4-MgGa2O4

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Hara, Kelley; Smith, Jeffrey D; Sander, Todd P.

Solid solution eects on thermal conductivity within the MgO-Al2O3-Ga2O3 system were studied. Samples with systematically varied additions of MgGa2O4 to MgAl2O4 were prepared and the laser ash technique was used to determine thermal diusivity at temperatures between 200C and 1300C. Heat capacity as a function of temperature from room temperature to 800C was also determined using dierential scanning calorimetry. Solid solution in the MgAl2O4-MgGa2O4 system decreases the thermal conductivity up to 1000C. At 200C thermal conductivity decreased 24% with a 5 mol% addition of MgGa2O4 to the system. At 1000C the thermal conductivity decreased 13% with a 5 mol% addition.more » Steady state calculations showed a 12.5% decrease in heat ux with 5 mol% MgGa2O4 considered across a 12 inch thickness.« less

NASA Planetary Surface Exploration

NASA Technical Reports Server (NTRS)

Hayati, Samad

1999-01-01

Managed for NASA by the California Institute of Technology, the Jet Propulsion Laboratory is the lead U.S. center for robotic exploration of the solar system. JPL spacecraft have visited all known planets except Pluto (a Pluto mission is currently under study). In addition to its work for NASA, JPL conducts tasks for a variety of other federal agencies. In addition, JPL manages the worldwide Deep Space Network, which communicates with spacecraft and conducts scientific investigations from its complexes in California's Mojave Desert near Goldstone; near Madrid, Spain; and near Canberra, Australia. JPL employs about 6000 people.

Variable conductance heat pipe technology

NASA Technical Reports Server (NTRS)

Marcus, B. D.; Edwards, D. K.; Anderson, W. T.

1973-01-01

Research and development programs in variable conductance heat pipe technology were conducted. The treatment has been comprehensive, involving theoretical and/or experimental studies in hydrostatics, hydrodynamics, heat transfer into and out of the pipe, fluid selection, and materials compatibility, in addition to the principal subject of variable conductance control techniques. Efforts were not limited to analytical work and laboratory experimentation, but extended to the development, fabrication and test of spacecraft hardware, culminating in the successful flight of the Ames Heat Pipe Experiment on the OAO-C spacecraft.

High Thermal Conductivity Carbon Nanomaterials for Improved Thermal Management in Armament Composites

DTIC Science & Technology

2017-03-01

polymer matrices. In addition to improving mechanical and electrical properties, these forms of carbon typically demonstrate high intrinsic thermal...conductivities, a property that could be useful in improving the thermal dissipation performance of polymer matrix composites. In this study, carbon...nanotubes, carbon nanofibers and graphene have been added to polymers and polymer matrix composites in order to study the effect on the thermal

Structure–property study of cross-linked hydrocarbon/poly(ethylene oxide) electrolytes with superior conductivity and dendrite resistance† †Electronic supplementary information (ESI) available: Synthetic procedures, characterization data, electrochemical impedance spectra and additional SEM images. See DOI: 10.1039/c6sc01813k Click here for additional data file.

PubMed Central

Zheng, Qi; Ma, Lin; Khurana, Rachna

2016-01-01

Lithium dendrite growth is a fundamental problem that precludes the practical use of lithium metal batteries. Solid polymer electrolytes (SPEs) have been widely studied to resist the growth of lithium dendrites but the underlying mechanisms are still unclear. Most SPEs sacrifice high ionic conductivities for increased dendrite suppression performance by using components with high mechanical stiffness. We report a class of cross-linked hydrocarbon/poly(ethylene oxide) SPEs with both high ionic conductivities (approaching 1 × 10–3 S cm–1 at 25 °C) and superior dendrite suppression characteristics. A systematic structure–property study shows that the crystallinity of the hydrocarbon backbones plays a key role in regulating size and morphology of lithium dendrites, as well as the ability to suppress their growth. PMID:28451125

Revolutionary opportunities for materials and structures study, addendum

NASA Technical Reports Server (NTRS)

Feig, P. D.

1987-01-01

This report is an addendum to the Revolutionary Opportunities for Materials and Structures Study (ROMS), modifying the original by the addition of two tasks. The primary purpose of these tasks was to conduct additional aircraft/engine sizing and mission analysis to obtain contributory aircraft performance data such as fuel burns and direct operating costs for both the subsonic and supersonic engines.

Standing shocks in a two-fluid solar wind

NASA Technical Reports Server (NTRS)

Habbal, Shadia R.; Hu, You Qiu; Esser, Ruth

1994-01-01

We present a numerical study of the formation of standing shocks in the solar wind using a two-fluid time-dependent model in the presence of Alfven waves. Included in this model is the adiabatic cooling and thermal conduction of both electrons and protons. In this study, standing shocks develop in the flow when additional critical points form as a result of either localized momentum addition or rapid expansion of the flow tube below the existing sonic point. While the flow speed and density exhibit the same characteristics as found in earlier studies of the formation of standing shocks, the inclusion of electron and proton heat conduction produces different signatures in the electron and proton temperature profiles across the shock layer. Owing to the strong heat conduction, the electron temperature is nearly continuous across the shock, but its gradient has a negative jump across it, thus producing a net heat flux out of the shock layer. The proton temperature exhibits the same characteristics for shocks produced by momentum addition but behaves differently when the shock is formed by the rapid divergence of the flow tube. The adiabatic cooling in a rapidly diverging flow tube reduces the proton temperature so substantially that the proton heat conduction becomes negligible in the vicinity of the shock. As a result, protons experience a positive jump in temperature across the shock. While Alfven waves do not affect the formation of standing shocks, they contribute to the change of the mmomentum and energy balance across them. We also find that for this solar wind model the inclusion of thermal conduction and adiabatic cooling for the elctrons and protons increases significantly the range of parameters characterizing the formation of standing shocks over those previously found for isothermal and polytropic models.

The Effect of (Ag, Ni, Zn)-Addition on the Thermoelectric Properties of Copper Aluminate

PubMed Central

Yanagiya, Shun-ichi; Van Nong, Ngo; Xu, Jianxiao; Pryds, Nini

2010-01-01

Polycrystalline bulk copper aluminate Cu1-x-yAgxByAlO2 with B = Ni or Zn were prepared by spark plasma sintering and subsequent thermal treatment. The influence of partial substitution of Ag, Ni and Zn for Cu-sites in CuAlO2 on the high temperature thermoelectric properties has been studied. The addition of Ag and Zn was found to enhance the formation of CuAlO2 phase and to increase the electrical conductivity. The addition of Ag or Ag and Ni on the other hand decreases the electrical conductivity. The highest power factor of 1.26 × 10-4 W/mK2 was obtained for the addition of Ag and Zn at 1,060 K, indicating a significant improvement compared with the non-doped CuAlO2 sample.

Carbon Nanotube/Conductive Additive/Space Durable Polymer Nanocomposite Films for Electrostatic Charge Dissipation

NASA Technical Reports Server (NTRS)

Smith, Joseph G., Jr.; Watson, Kent A.; Delozier, Donavon M.; Connell, John W.

2003-01-01

Thin film membranes of space environmentally stable polymeric materials possessing low color/solar absorptivity (alpha) are of interest for potential applications on Gossamer spacecraft. In addition to these properties, sufficient electrical conductivity is required in order to dissipate electrostatic charge (ESC) build-up brought about by the charged orbital environment. One approach to achieve sufficient electrical conductivity for ESC mitigation is the incorporation of single wall carbon nanotubes (SWNTs). However, when the SWNTs are dispersed throughout the polymer matrix, the nanocomposite films tend to be significantly darker than the pristine material resulting in a higher alpha. The incorporation of conductive additives in combination with a decreased loading level of SWNTs is one approach for improving alpha while retaining conductivity. Taken individually, the low loading level of conductive additives and SWNTs is insufficient in achieving the percolation level necessary for electrical conductivity. When added simultaneously to the film, conductivity is achieved through a synergistic effect. The chemistry, physical, and mechanical properties of the nanocomposite films will be presented.

Supplementary searches of PubMed to improve currency of MEDLINE and MEDLINE In-Process searches via Ovid.

PubMed

Duffy, Steven; de Kock, Shelley; Misso, Kate; Noake, Caro; Ross, Janine; Stirk, Lisa

2016-10-01

The research investigated whether conducting a supplementary search of PubMed in addition to the main MEDLINE (Ovid) search for a systematic review is worthwhile and to ascertain whether this PubMed search can be conducted quickly and if it retrieves unique, recently published, and ahead-of-print studies that are subsequently considered for inclusion in the final systematic review. Searches of PubMed were conducted after MEDLINE (Ovid) and MEDLINE In-Process (Ovid) searches had been completed for seven recent reviews. The searches were limited to records not in MEDLINE or MEDLINE In-Process (Ovid). Additional unique records were identified for all of the investigated reviews. Search strategies were adapted quickly to run in PubMed, and reviewer screening of the results was not time consuming. For each of the investigated reviews, studies were ordered for full screening; in six cases, studies retrieved from the supplementary PubMed searches were included in the final systematic review. Supplementary searching of PubMed for studies unavailable elsewhere is worthwhile and improves the currency of the systematic reviews.

Supplementary searches of PubMed to improve currency of MEDLINE and MEDLINE In-Process searches via Ovid

PubMed Central

Duffy, Steven; de Kock, Shelley; Misso, Kate; Noake, Caro; Ross, Janine; Stirk, Lisa

2016-01-01

Objective The research investigated whether conducting a supplementary search of PubMed in addition to the main MEDLINE (Ovid) search for a systematic review is worthwhile and to ascertain whether this PubMed search can be conducted quickly and if it retrieves unique, recently published, and ahead-of-print studies that are subsequently considered for inclusion in the final systematic review. Methods Searches of PubMed were conducted after MEDLINE (Ovid) and MEDLINE In-Process (Ovid) searches had been completed for seven recent reviews. The searches were limited to records not in MEDLINE or MEDLINE In-Process (Ovid). Results Additional unique records were identified for all of the investigated reviews. Search strategies were adapted quickly to run in PubMed, and reviewer screening of the results was not time consuming. For each of the investigated reviews, studies were ordered for full screening; in six cases, studies retrieved from the supplementary PubMed searches were included in the final systematic review. Conclusion Supplementary searching of PubMed for studies unavailable elsewhere is worthwhile and improves the currency of the systematic reviews. PMID:27822154

47 CFR 1.1409 - Commission consideration of the complaint.

Code of Federal Regulations, 2012 CFR

2012-10-01

... rebuttal, studies that have been conducted. The Commission may also request that one or more of the parties make additional filings or provide additional information. Where one of the parties has failed to... formulas for determining a maximum just and reasonable rate: (1) The following formula shall apply to...

State of the art studies/FY87 : task 5 - increasing intersection capacity with additional through lanes

DOT National Transportation Integrated Search

1987-10-01

A review of the literature and a state-of-the-practice survey were conducted of procedures relating to the addition of through lanes at intersections. The capacity and level of service change at the intersection is of interest, since the reduction in...

Influence of Li3BO3 additives on the Li+ conductivity and stability of Ca/Ta-substituted Li6.55(La2.95Ca0.05)(Zr1.5Ta0.5)O12 electrolytes

NASA Astrophysics Data System (ADS)

Zhang, L. C.; Yang, J. F.; Gao, Y. X.; Wang, X. P.; Fang, Q. F.; Chen, C. H.

2017-07-01

The cubic Ca/Ta-substituted Li6.55(La2.95Ca0.05)(Zr1.5Ta0.5)O12 (LLCZTO) electrolytes were synthesized at 800 °C with Li3BO3 as additives. The optimal amount of Li3BO3 and its influences on the microstructure, crystal structures, Li+ conductivity and the stability of the Li6.55(La2.95Ca0.05)(Zr1.5Ta0.5)O12 were studied by SEM, XRD and EIS. Among all the samples, when the molar ratio of Li3BO3 to the Li6.55(La2.95Ca0.05)(Zr1.5Ta0.5)O12 is 4:5, the highest Li+ conductivity of 1.33 × 10-4 S cm-1 at 30 °C is obtained. When the LLCZTO samples are exposed in air, the Li+ conductivity is deteriorated possibly owing to the side reactions between the LLCZTO and the H2O or CO2 in the air. The Li3BO3 addition can alleviate such deterioration of the Li+ conductivity.

The Effectiveness of an Additional Stretching Exercise Program in Improving Flexibility Level among Preschool Boys

ERIC Educational Resources Information Center

Lee, Wee Akina Sia Seng; Rengasamy, Shabeshan A/L; Raju, Subramaniam A/L

2014-01-01

This study was conducted to examine the effectiveness of a two minutes' additional stretching exercise program in a 30 minutes games teaching lesson in improving the flexibility level of 6 year old preschool boys (M = 5.92, SD = 0.27) in a preschool in Malaysia. Fifty (50) preschool boys were selected for the study based on the intact sampling…

Representational Flexibility and Problem-Solving Ability in Fraction and Decimal Number Addition: A Structural Model

ERIC Educational Resources Information Center

Deliyianni, Eleni; Gagatsis, Athanasios; Elia, Iliada; Panaoura, Areti

2016-01-01

The aim of this study was to propose and validate a structural model in fraction and decimal number addition, which is founded primarily on a synthesis of major theoretical approaches in the field of representations in Mathematics and also on previous research on the learning of fractions and decimals. The study was conducted among 1,701 primary…

Investigations of the ex situ ionic conductivities at 30 degrees C of metal-cation-free quaternary ammonium alkaline anion-exchange membranes in static atmospheres of different relative humidities.

PubMed

Varcoe, John R

2007-03-28

This article presents the first systematic study of the effect of Relative Humidity (RH) on the water content and hydroxide ion conductivity of quaternary ammonium-based Alkaline Anion-Exchange Membranes (AAEMs). These AAEMs have been developed specifically for application in alkaline membrane fuel cells, where conductivities of >0.01 S cm(-1) are mandatory. When fully hydrated, an ETFE-based radiation-grafted AAEM exhibited a hydroxide ion conductivity of 0.030 +/- 0.005 S cm(-1) at 30 degrees C without additional incorporation of metal hydroxide salts; this is contrary to the previous wisdom that anion-exchange membranes are very low in ionic conductivity and represents a significant breakthrough for metal-cation-free alkaline ionomers. Desirably, this AAEM also showed increased dimensional stability on full hydration compared to a Nafion-115 proton-exchange membrane; this dimensional stability is further improved (with no concomitant reduction in ionic conductivity) with a commercial AAEM of similar density but containing additional cross-linking. However, all of the AAEMs evaluated in this study demonstrated unacceptably low conductivities when the humidity of the surrounding static atmospheres was reduced (RH = 33-91%); this highlights the requirement for continued AAEM development for operation in H(2)/air fuel cells with low humidity gas supplies. Preliminary investigations indicate that the activation energies for OH(-) conduction in these quaternary ammonium-based solid polymer electrolytes are typically 2-3 times higher than for H(+) conduction in acidic Nafion-115 at all humidities.

Intracochlear pressure measurements to study bone conduction transmission: State-of-the art and proof of concept of the experimental Procedure

NASA Astrophysics Data System (ADS)

Borgers, Charlotte; van Wieringen, Astrid; D'hondt, Christiane; Verhaert, Nicolas

2018-05-01

The cochlea is the main contributor in bone conduction perception. Measurements of differential pressure in the cochlea give a good estimation of the cochlear input provided by bone conduction stimulation. Recent studies have proven the feasibility of intracochlear pressure measurements in chinchillas and in human temporal bones to study bone conduction. However, similar measurements in fresh-frozen whole human cadaveric heads could give a more realistic representation of the five different transmission pathways of bone conduction to the cochlea compared to human temporal bones. The aim of our study is to develop and validate a framework for intracochlear pressure measurements to evaluate different aspects of bone conduction in whole human cadaveric heads. A proof of concept describing our experimental setup is provided together with the procedure. Additionally, we also present a method to fix the stapes footplate in order to simulate otosclerosis in human temporal bones. The effectiveness of this method is verified by some preliminary results.

Vegetation studies, National Training Center, Fort Irwin, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandt, C.A.; Rickard, W.H.; Cadoret, N.A.

1997-09-01

During the spring of 1992, the Pacific Northwest National Laboratory (PNNL) conducted surveys of the Avawatz and Granite mountains springs for the National Training Center (NTC) to evaluate the occurrence of sensitive plant species in these areas. PNNL also conducted a survey of the eastern outwash of the Paradise Range for the occurrence of Lane Mountain milk vetch (Astragalus jaegerianus). In spring of 1993, PNNL conducted an additional study of Lane Mountain milk vetch on the NTC to determine habitat characteristics for this plant and to develop a method for predicting its potential occurrence, based on simple habitat attributes. Themore » results of these studies are itemized.« less

Electrospray-assisted drying of live probiotics in acacia gum microparticles matrix.

PubMed

Zaeim, Davood; Sarabi-Jamab, Mahboobe; Ghorani, Behrouz; Kadkhodaee, Rassoul; Tromp, R Hans

2018-03-01

Acacia gum solution was employed as a carrier for electrospray-assisted drying of probiotic cells. To optimize the process, effect of gum concentration, thermal sterilization as a prerequisite for microbial studies, and surfactant addition on physical properties of feed solution was investigated. Increasing gum concentration from 20 to 40 wt.% led to a viscosity increase, whilst surface tension did not change meaningfully and electrical conductivity declined after an increasing trend up to 30 wt.% of the gum. Thermal sterilization increased the viscosity without any significant effect on the conductivity and surface tension. Surfactant addition reduced the surface tension and conductivity but the viscosity increased. Highly uniform particles were formed by electrospray-assisted drying of autoclaved 35 wt.% acacia gum solution containing 1 wt.% Tween 80. Thermal sterilization and surfactant addition improved electrospray-ability of acacia gum solution. Bacterial count showed that more than 96 percent of probiotic cells passed the process viably. Copyright © 2017 Elsevier Ltd. All rights reserved.

Operations CROSSTIE and BOWLINE Events DOOR MIST, DORSAL FIN, MILK SHAKE, DIANA MOON, HUDSON SEAL, and MING VASE, 31 August 1967 - 20 November 1968

DTIC Science & Technology

1985-12-15

sponsored underground test events were conducted from 31 August 1967 to 20 November 1968 to study weapons effects . Two were shaft-type and four were...conducted, 161 were for weapons related or effects purposes, and 33 were safety ex- periments. An additional 22 nuclear experiments were conducted from...1962 until the last atmospheric test on 4 November 1962, 40 weapons related and weapons effects tests were conducted as part of the Pacific and Nevada

Integration of an Objective Structured Clinical Examination (OSCE) into the dental preliminary exams.

PubMed

Ratzmann, Anja; Wiesmann, Ulrich; Kordaß, Bernd

2012-01-01

In the pre-clinical phase of the study of dentistry at the University of Greifswald, the course "Early Patient Contact (EPC)" is conducted within the framework of Community Medicine/Dentistry. The course is based on three pillars: the patient visiting program, special problem-oriented seminars, and communication training for doctors. The essential goal consists of providing students with real patient contact right at the beginning of their study of dentistry, thus making the study of dentistry patient-based very early on. Students are trained in taking comprehensive anamneses and recording clinical findings. Within the framework of the dental preliminary exams, the course is evaluated using an OSCE on a standardized patient. Furthermore, the added value of an additional training unit (conducting anamnesis and clinical examination) in preparation for the OSCE was evaluated. The exam results of a group without training (control group) were compared with those of a group with training (intervention group). The intervention group performed significantly better than the control on the following items: the total number of points achieved on the OSCE early patient contact, and in the most important points of the anamnesis and clinical examination. In addition, the intervention group tended to score higher in terms of the item "oral health status". The present study showed a positive effect of an additional training unit on students' performance in the OSCE. Taking the limitations of the study and the results of a literature review into account, we recommend conducting such training as preparation for the OSCE.

Temperature profiles from Salt Valley, Utah

NASA Astrophysics Data System (ADS)

Sass, J. H.; Lachenbruch, A. H.; Smith, E. P.

Temperature profiles were obtained in the nine drilled wells as part of a thermal study of the Salt Valley anticline, Paradox Basin, Utha. Thermal conductivities were also measured on 10 samples judged to be representative of the rocks encountered in the deepest hole. The temperature profiles and thermal conductivities are presented, together with preliminary interpretive remarks and suggestions for additional work.

Anisotropy of synthetic quartz electrical conductivity at high pressure and temperature

NASA Astrophysics Data System (ADS)

Wang, Duojun; Li, Heping; Yi, Li; Matsuzaki, Takuya; Yoshino, Takashi

2010-09-01

AC measurements of the electrical conductivity of synthetic quartz along various orientations were made between 0.1 and 1 MHz, at ˜855˜1601 K and at 1.0 GPa. In addition, the electrical conductivity of quartz along the c axis has been studied at 1.0-3.0 GPa. The impedance arcs representing bulk conductivity occur in the frequency range of 103-106 Hz, and the electrical responses of the interface between the sample and the electrode occur in the 0.1˜103 Hz range. The pressure has a weak effect on the electrical conductivity. The electrical conductivity experiences no abrupt change near the α - β phase transition point. The electrical conductivity of quartz is highly anisotropic; the electrical conductivity along the c axis is strongest and several orders of magnitude larger than in other directions. The activation enthalpies along various orientations are determined to be 0.6 and 1.2 eV orders of magnitude, respectively. The interpretation of the former is based on the contribution of alkali ions, while the latter effect is attributed to additional unassociated aluminum ions. Comparison of determined anisotropic conductivity of quartz determined with those from field geophysical models shows that the quartz may potentially provide explanations for the behavior of electrical conductivity of anisotropy in the crust that are inferred from the transverse magnetic mode.

Facing Bilingual Education: Kindergarten Teachers' Attitudes, Strategies and Challenges

ERIC Educational Resources Information Center

Schwartz, Mila; Mor-Sommerfeld, Aura; Leikin, Mark

2010-01-01

This article examines how majority-language teachers coping with additive education view their roles in a bilingual framework, how they perceive issues of culture and language in young bilingual children, and how they understand the term "bilingual education" in an L2 non-additive context. The study has been conducted in the context of…

Home Improvement Research Project.

ERIC Educational Resources Information Center

Wolansky, William D.; Ogwezi, Benedict

A study was conducted to determine what alterations, additions, and improvements in older homes make them more desirable to the consumer. After a revlew of the literature, a questionnaire was developed and sent to fifty-five homeowners in Ames, Iowa, who had had major additions or renovations done by contractors during the previous five years.…

Effects of biochar addition on evaporation in the five typical Loess Plateau soils

USDA-ARS?s Scientific Manuscript database

Soil evaporation is the main route of soil moisture loss and often exceeds precipitation in the arid and semi-arid regions of the Loess Plateau. This study was conducted to determine whether biochar addition could reduce soil evaporation in drylands. We measured the evaporative loss in five typical ...

Ten-Structure as Strategy of Addition 1-20 by Involving Spatial Structuring Ability for First Grade Students

ERIC Educational Resources Information Center

Salmah, Ummy; Putri, Ratu Ilma Indra; Somakim

2015-01-01

The aim of this study is to design learning activities that can support students to develop strategies for the addition of number 1 to 20 in the first grade by involving students' spatial structuring ability. This study was conducted in Indonesia by involving 27 students. In this paper, one of three activities is discussed namely ten-box activity.…

Cost-effectiveness study comparing cefoperazone-sulbactam to a three-drug combination for treating intraabdominal infections in an Indian health-care setting.

PubMed

Kochhar, Puja; Suvarna, Viraj; Duttagupta, Sandeep; Sarkar, Shirsendu

2008-03-01

This article presents the methodology and results of the pharmacoeconomic analysis of the Magnex Against Standard COmbination Therapy study comparing cefoperazone-sulbactam (Magnex) versus ceftazidime+ amikacin+metronidazole, in the treatment of intra-abdominal infections. This prospective, open label, phase IV study was conducted at 17 study sites in India and randomized subjects to receive either cefoperazone-sulbactam or the combination. Pharmacoeconomic analysis was included as a secondary objective and conducted in the clinical efficacy-evaluable (CEE) and the successfully treated patients. All comparisons between treatment groups were conducted using analysis of variance (ANOVA) or Wilcoxon Two-Sample tests. All costs were reported as Indian Rupee (INR) and actual unit costs collected in 2006 were used for the analyses [1 USD approximately 40 INR; 1 Euro approximately 56 INR]. In the CEE and the successfully treated subset of patients, the average cost of treatment was numerically lower in the cefoperazone-sulbactam arm (not statistically significant). The analyses found that the cost-effectiveness ratio (CER) for cefoperazone-sulbactam was INR 17,640.53 and that for the comparator group was INR 22,075.16. Additionally, the incremental CER results showed that the cost of treatment was INR 21,505.59 lower per additional successfully treated patient in the cefoperazone-sulbactam group. The present study was the first of its kind to be conducted in the "price sensitive" Indian health-care setting. Though study was not powered for the difference in average cost of treatments, there was a trend favoring cefoperazone sulbactam. The findings from this study should encourage further conduct of similar analyses and increase the knowledge regarding pharmacoeconomics in India.

Responses of hydraulics at the whole-plant level to simulated nitrogen deposition of different levels in Fraxinus mandshurica.

PubMed

Wang, Ai-Ying; Wang, Miao; Yang, Da; Song, Jia; Zhang, Wei-Wei; Han, Shi-Jie; Hao, Guang-You

2016-08-01

Nitrogen (N) deposition is expected to have great impact on forest ecosystems by affecting many aspects of plant-environmental interactions, one of which involves its influences on plant water relations through modifications of plant hydraulic architecture. However, there is a surprising lack of integrative study on tree hydraulic architecture responses to N deposition, especially at the whole-plant level. In the present study, we used a 5-year N addition experiment to simulate the effects of six different levels of N deposition (20-120 kg ha(-1) year(-1)) on growth and whole-plant hydraulic conductance of a dominant tree species (Fraxinus mandshurica Rupr.) from the typical temperate forest of NE China. The results showed that alleviation of N limitation by moderate concentrations of fertilization (20-80 kg ha(-1) year(-1)) promoted plant growth, but further N additions on top of the threshold level showed negative effects on plant growth. Growth responses of F. mandshurica seedlings to N addition of different concentrations were accompanied by corresponding changes in whole-plant hydraulic conductance; higher growth rate was accompanied by reduced whole-plant hydraulic conductance (Kplant) and higher leaf water-use efficiency. A detailed analysis on hydraulic conductance of different components of the whole-plant water transport pathway revealed that changes in root and leaf hydraulic conductance, rather than that of the stem, were responsible for Kplant responses to N fertilization. Both plant growth and hydraulic architecture responses to increasing levels of N addition were not linear, i.e., the correlation between measured parameters and N availability exhibited bell-shaped curves with peak values observed at medium levels of N fertilization. Changes in hydraulic architecture in response to fertilization found in the present study may represent an important underlying mechanism for the commonly observed changes in water-related tree performances in response to N deposition. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Body size as a latent variable in a structural equation model: thermal acclimation and energetics of the leaf-eared mouse.

PubMed

Nespolo, Roberto F; Arim, Matías; Bozinovic, Francisco

2003-07-01

Body size is one of the most important determinants of energy metabolism in mammals. However, the usual physiological variables measured to characterize energy metabolism and heat dissipation in endotherms are strongly affected by thermal acclimation, and are also correlated among themselves. In addition to choosing the appropriate measurement of body size, these problems create additional complications when analyzing the relationships among physiological variables such as basal metabolism, non-shivering thermogenesis, thermoregulatory maximum metabolic rate and minimum thermal conductance, body size dependence, and the effect of thermal acclimation on them. We measured these variables in Phyllotis darwini, a murid rodent from central Chile, under conditions of warm and cold acclimation. In addition to standard statistical analyses to determine the effect of thermal acclimation on each variable and the body-mass-controlled correlation among them, we performed a Structural Equation Modeling analysis to evaluate the effects of three different measurements of body size (body mass, m(b); body length, L(b) and foot length, L(f)) on energy metabolism and thermal conductance. We found that thermal acclimation changed the correlation among physiological variables. Only cold-acclimated animals supported our a priori path models, and m(b) appeared to be the best descriptor of body size (compared with L(b) and L(f)) when dealing with energy metabolism and thermal conductance. However, while m(b) appeared to be the strongest determinant of energy metabolism, there was an important and significant contribution of L(b) (but not L(f)) to thermal conductance. This study demonstrates how additional information can be drawn from physiological ecology and general organismal studies by applying Structural Equation Modeling when multiple variables are measured in the same individuals.

Structured Parent-Child Observations Predict Development of Conduct Problems: the Importance of Parental Negative Attention in Child-Directed Play.

PubMed

Fleming, Andrew P; McMahon, Robert J; King, Kevin M

2017-04-01

Structured observations of parent-child interactions are commonly used in research and clinical settings, but require additional empirical support. The current study examined the capacity of child-directed play, parent-directed play, and parent-directed chore interaction analogs to uniquely predict the development of conduct problems across a 6-year follow-up period. Parent-child observations were collected from 338 families from high-risk neighborhoods during the summer following the child's first-grade year. Participating children were 49.2 % female, 54.4 % white, and 45.6 % black, and had an average age of 7.52 years at the first assessment. Conduct problems were assessed via parent report and teacher report at five assessment points between first grade and seventh grade. Latent growth curve modeling was used to analyze predictors of conduct problem trajectory across this 6-year follow-up period. When race, sex, socioeconomic status, and maternal depressive symptoms were controlled, parental negative attention during child-directed play predicted higher levels of parent-reported conduct problems concurrently and after a 6-year follow-up period. Parental negative attention during child-directed play also predicted higher teacher-reported conduct problems 6 years later. Findings support the use of child-directed play and parent-directed chore analogs in predicting longitudinal development of conduct problems. The presence of parental negative attention during child-directed play appears to be an especially important predictor of greater conduct problems over time and across multiple domains. Additionally, the potential importance of task-incongruent behavior is proposed for further study.

Analysis of quasi-hybrid solid rocket booster concepts for advanced earth-to-orbit vehicles

NASA Technical Reports Server (NTRS)

Zurawski, Robert L.; Rapp, Douglas C.

1987-01-01

A study was conducted to assess the feasibility of quasi-hybrid solid rocket boosters for advanced Earth-to-orbit vehicles. Thermochemical calculations were conducted to determine the effect of liquid hydrogen addition, solids composition change plus liquid hydrogen addition, and the addition of an aluminum/liquid hydrogen slurry on the theoretical performance of a PBAN solid propellant rocket. The space shuttle solid rocket booster was used as a reference point. All three quasi-hybrid systems theoretically offer higher specific impulse when compared with the space shuttle solid rocket boosters. However, based on operational and safety considerations, the quasi-hybrid rocket is not a practical choice for near-term Earth-to-orbit booster applications. Safety and technology issues pertinent to quasi-hybrid rocket systems are discussed.

Conductivity and Thermal Studies on Plasticized Nano-Composite Solid Polymer Electrolyte, Peo: Ec: LiTf: Al2O3

NASA Astrophysics Data System (ADS)

Pitawala, H. M. J. C.; Dissanayake, M. A. K. L.; Seneviratne, V. A.

2006-06-01

Poly (ethylene oxide)-(PEO)-based composite polymer electrolytes are of great interest for solid-state-electrochemical devices. This paper presents the results of a preliminary study on electrical conductivity and thermal behavior (DSC) of composite polymer electrolytes (CPEs) containing PEO: LiCF3SO3 complexed with plasticizer (EC) and incorporating nano-sized particles of the ceramic filler Al2O3. Ionic conductivity enhancement in these electrolytes has been obtained by optimizing the combined effect of the plasticizer and the ceramic filler. Nano-composite, plasticized polymer electrolyte films (400-600μm) were prepared by common solvent casting method. It was revealed that the presence of the Al2O3 filler in PEO: LiTf polymer electrolyte significantly enhanced the ionic conductivity in the temperature range of interest, giving the maximum conductivity for (PEO)9LiTf+15 wt.% Al2O3 CPE [σRT (max)=2×10-5 S cm-1]. It was also observed that the addition of plasticizer (EC) to this electrolyte up to a concentration of 50 wt. % EC, showed a further conductivity enhancement [σRT (max) = 1.5×10-4 S cm-1]. It is suggested that the conductivity is enhanced mainly by two mechanisms. The plasticizer (EC) would directly contribute by reducing the crystallinity and increasing the amorphous phase content of the polymer electrolytes. The ceramic filler (Al2O3) would contribute to conductivity enhancement by creating additional sites to migrating ionic species through transient bonding with O/OH groups in the filler surface. The decrease of Tg values of plasticized CPE systems seen in the DSC thermograms points towards the improved segmental flexibility of polymer chains, increasing the mobility of conducting ions.

NASA's International Lunar Network Anchor Nodes and Robotic Lunar Lander Project Update

NASA Technical Reports Server (NTRS)

Cohen, Barbara A.; Bassler, Julie A.; Ballard, Benjamin; Chavers, Greg; Eng, Doug S.; Hammond, Monica S.; Hill, Larry A.; Harris, Danny W.; Hollaway, Todd A.; Kubota, Sanae;

Laboratory study on subgrade soil stabilization using RBI grade 81

NASA Astrophysics Data System (ADS)

Cynthia, J. Bernadette; Kamalambikai, B.; Prasanna Kumar, R.; Dharini, K.

2017-07-01

The present study investigates the effect of reinforcing the sub grade soils with RBI 81 material. A soil nearby was collected and preliminary tests were conducted to classify the soil and it was found from the results that the sample collected was a poorly graded clay. Subsequently Tests such as Proctor Compaction, CBR, and UCC were conducted to study the various engineering properties of the identified soil. In addition to the above tests were also conducted on the soil by reinforcing with varying percentages of RBI 81. From the analysis of test results it was found that this material (RBI 81) will significantly improve the CBR value of the soil.

Impedance Spectroscopy Analysis of Mg4Nb2O9 Ceramics with Different Additions of V2O5 for Microwave and Radio Frequency Applications

NASA Astrophysics Data System (ADS)

Filho, J. M. S.; Rodrigues Junior, C. A.; Sousa, D. G.; Oliveira, R. G. M.; Costa, M. M.; Barroso, G. C.; Sombra, A. S. B.

2017-07-01

The complex impedance spectroscopy study of magnesium niobate Mg4Nb2O9 (MN) ceramics with different additions of V2O5 (0%, 2%, 5%) was performed in this present paper. The preparation of MN samples were carried out by using the solid-state reaction method with a high-energy milling machine. Frequency and temperature dependence of the complex impedance, complex modulus analysis, and conductivity were measured and calculated at different temperatures by using a network impedance analyzer. A non-Debye type relaxation was observed showing a decentralization of the semicircles. Cole-Cole formalism was adopted here with the help of a computer program used to fit the experimental data. A typical universal dielectric response in the frequency-dependent conductivity at different temperatures was found. The frequency dependent ac conductivity at different temperatures indicates that the conduction process is thermally activated. The activation energy was obtained from the Arrhenius fitting by using conductivity and electrical modules data. The results would help to understand deeply the relaxation process in these types of materials.

A Raman Spectroscopic Study of Samples from the May 2001 FIDO Test Site

NASA Technical Reports Server (NTRS)

Kuebler, K.; Jolliff, B. L.; Wang, A.; Haskin, L. A.

2002-01-01

Last May, a rover field test was conducted in the Mojave desert. This study shows what mineralogy a rover-deployed Raman spectrometer might have observed. Additional information is contained in the original extended abstract.

Ionic Conduction in Nanocrystalline Materials

DTIC Science & Technology

2000-02-10

In the following, we review studies performed films prepared by a polymer precursor process on on stabilized zirconia ceramics with grain sizes alumina ... titania , is reviewed. While it remains too early to make firm conclusions, the following observations are made. Additives which contribute to ion blocking...Keywords: Ionic conductivity; Nanocrystalline; Zirconia; Ceria; Titania ; Defects 1. Introduction tivity by nearly two orders of magnitude [6]. Given the

The Contribution of Callous-Unemotional Traits and Conduct Problems to Bullying in Early Adolescence

ERIC Educational Resources Information Center

Viding, Essi; Simmonds, Elizabeth; Petrides, K. V.; Frederickson, Norah

2009-01-01

Background: Although a lot is known about the association of conduct problems with bullying, less attention has been paid to co-occurring traits, such as callous-unemotional (CU) traits that might additionally contribute to the risk of engaging in bullying. This study investigated the contribution of CU traits to direct and indirect bullying,…

Inorganic-based proton conductive composite membranes for elevated temperature and reduced relative humidity PEM fuel cells

NASA Astrophysics Data System (ADS)

Wang, Chunmei

Proton exchange membrane (PEM) fuel cells are regarded as highly promising energy conversion systems for future transportation and stationary power generation and have been under intensive investigations for the last decade. Unfortunately, cutting edge PEM fuel cell design and components still do not allow economically commercial implementation of this technology. The main obstacles are high cost of proton conductive membranes, low-proton conductivity at low relative humidity (RH), and dehydration and degradation of polymer membranes at high temperatures. The objective of this study was to develop a systematic approach to design a high proton conductive composite membrane that can provide a conductivity of approximately 100 mS cm-1 under hot and dry conditions (120°C and 50% RH). The approach was based on fundamental and experimental studies of the proton conductivity of inorganic additives and composite membranes. We synthesized and investigated a variety of organic-inorganic Nafion-based composite membranes. In particular, we analyzed their fundamental properties, which included thermal stability, morphology, the interaction between inorganic network and Nafion clusters, and the effect of inorganic phase on the membrane conductivity. A wide range of inorganic materials was studied in advance in order to select the proton conductive inorganic additives for composite membranes. We developed a conductivity measurement method, with which the proton conductivity characteristics of solid acid materials, zirconium phosphates, sulfated zirconia (S-ZrO2), phosphosilicate gels, and Santa Barbara Amorphous silica (SBA-15) were discussed in detail. Composite membranes containing Nafion and different amounts of functionalized inorganic additives (sulfated inorganics such as S-ZrO2, SBA-15, Mobil Composition of Matter MCM-41, and S-SiO2, and phosphonated inorganic P-SiO2) were synthesized with different methods. We incorporated inorganic particles within Nafion clusters either by mixing inorganic gels or solutions with Nafion solution followed by membrane casting or by blending inorganic powders with Nafion solution. The membrane properties, such as acidity, swelling, water uptake, thermostability, proton conductivity, and electrochemical performance, were explored in depth. We characterized the inorganic phase inside composite membranes and its interaction with the Nafion matrix by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Furthermore, we discussed the effect of these inorganic conductors' properties, such as particle size, conductivity, and interaction between functional groups and the Nafion, on the membrane conductivity. The contribution of hydrophilic inorganic particles in improving the membrane fuel cell performance was numerically analyzed by Tafel plot. Finally, the proton conductivity phenomena in composite membranes were simulated with two proton-transport models; one was based on the rule of mixtures, and the other was described by generalized Stefan-Maxwell equations. In the simulation, we proposed a new route in rational design of high proton-conductive composite membranes.

HUMAN HEALTH DAMAGES FROM MOBILE SOURCE AIR POLLUTION: ADDITIONAL DELPHI DATA ANALYSIS. VOLUME II

EPA Science Inventory

The report contains the results of additional analyses of the data generated by a panel of medical experts for a study of Human Health Damages from Mobile Source Air Pollution (hereafter referred to as HHD) conducted by the California Air Resources Board in 1973-75 for the U.S. E...

TiO2 as conductivity enhancer in PVdF-HFP polymer electrolyte system

NASA Astrophysics Data System (ADS)

Bhattacharya, Shreya; Manojkumar Ubarhande, Radha; Usha Rani, M.; Shanker Babu, Ravi; Arunkumar, R.

2017-11-01

Composite polymer electrolytes were prepared by incorporating inorganic filler TiO2 into PVdF-HFP-PMMA-EC-LiClO4 system. The electrolyte films were prepared by solvent casting technique. The effect of inorganic filler on the conductivity of the blended polymer electrolyte was studied and it is found that there is a considerable increase in ionic conductivity 1.296 × 10-3 S/cm-1 on the addition of TiO2. X-ray diffraction (XRD) study elucidate the increase in amorphous nature of the polymer electrolyte. This tendency of the polymer electrolyte could be the reason behind the increase in ionic conductivity. Fourier transform infrared spectroscopy (FTIR) spectra show the occurrence of complexation and interaction among the components.

Performance-Enhanced Activated Carbon Electrodes for Supercapacitors Combining Both Graphene-Modified Current Collectors and Graphene Conductive Additive.

PubMed

Wang, Rubing; Qian, Yuting; Li, Weiwei; Zhu, Shoupu; Liu, Fengkui; Guo, Yufen; Chen, Mingliang; Li, Qi; Liu, Liwei

2018-05-15

Graphene has been widely used in the active material, conductive agent, binder or current collector for supercapacitors, due to its large specific surface area, high conductivity, and electron mobility. However, works simultaneously employing graphene as conductive agent and current collector were rarely reported. Here, we report improved activated carbon (AC) electrodes (AC@G@NiF/G) simultaneously combining chemical vapor deposition (CVD) graphene-modified nickel foams (NiF/Gs) current collectors and high quality few-layer graphene conductive additive instead of carbon black (CB). The synergistic effect of NiF/Gs and graphene additive makes the performances of AC@G@NiF/G electrodes superior to those of electrodes with CB or with nickel foam current collectors. The performances of AC@G@NiF/G electrodes show that for the few-layer graphene addition exists an optimum value around 5 wt %, rather than a larger addition of graphene, works out better. A symmetric supercapacitor assembled by AC@G@NiF/G electrodes exhibits excellent cycling stability. We attribute improved performances to graphene-enhanced conductivity of electrode materials and NiF/Gs with 3D graphene conductive network and lower oxidation, largely improving the electrical contact between active materials and current collectors.

Performance-Enhanced Activated Carbon Electrodes for Supercapacitors Combining Both Graphene-Modified Current Collectors and Graphene Conductive Additive

PubMed Central

Wang, Rubing; Qian, Yuting; Li, Weiwei; Zhu, Shoupu; Liu, Fengkui; Guo, Yufen; Chen, Mingliang; Li, Qi; Liu, Liwei

2018-01-01

Graphene has been widely used in the active material, conductive agent, binder or current collector for supercapacitors, due to its large specific surface area, high conductivity, and electron mobility. However, works simultaneously employing graphene as conductive agent and current collector were rarely reported. Here, we report improved activated carbon (AC) electrodes (AC@G@NiF/G) simultaneously combining chemical vapor deposition (CVD) graphene-modified nickel foams (NiF/Gs) current collectors and high quality few-layer graphene conductive additive instead of carbon black (CB). The synergistic effect of NiF/Gs and graphene additive makes the performances of AC@G@NiF/G electrodes superior to those of electrodes with CB or with nickel foam current collectors. The performances of AC@G@NiF/G electrodes show that for the few-layer graphene addition exists an optimum value around 5 wt %, rather than a larger addition of graphene, works out better. A symmetric supercapacitor assembled by AC@G@NiF/G electrodes exhibits excellent cycling stability. We attribute improved performances to graphene-enhanced conductivity of electrode materials and NiF/Gs with 3D graphene conductive network and lower oxidation, largely improving the electrical contact between active materials and current collectors. PMID:29762528

Facile Synthesis of Conductive Polypyrrole Wrinkle Topographies on Polydimethylsiloxane via a Swelling-Deswelling Process and Their Potential Uses in Tissue Engineering.

PubMed

Aufan, M Rifqi; Sumi, Yang; Kim, Semin; Lee, Jae Young

2015-10-28

Electrically conducting biomaterials have gained great attention in various biomedical studies especially to influence cell and tissue responses. In addition, wrinkling can present a unique topography that can modulate cell-material interactions. In this study, we developed a simple method to create wrinkle topographies of conductive polypyrrole (wPPy) on soft polydimethylsiloxane surfaces via a swelling-deswelling process during and after PPy polymerization and by varying the thickness of the PPy top layers. As a result, various features of wPPy in the range of the nano- and microscales were successfully obtained. In vitro cell culture studies with NIH 3T3 fibroblasts and PC12 neuronal cells indicated that the conductive wrinkle topographies promote cell adhesion and neurite outgrowth of PC12 cells. Our studies help to elucidate the design of the surface coating and patterning of conducting polymers, which will enable us to simultaneously provide topographical and electrical signals to improve cell-surface interactions for potential tissue-engineering applications.

Optical spectroscopy study of the three-dimensional Dirac semimetal ZrTe 5

DOE PAGES

Chen, R. Y.; Gu, G. D.; Zhang, S. J.; ...

2015-08-05

Three-dimensional (3D) topological Dirac materials have been under intensive study recently. The layered compound ZrTe 5 has been suggested to be one such material as a result of transport and angle-resolved photoemission spectroscopy experiments. Here, we perform infrared reflectivity measurements to investigate the underlying physics of this material. The derived optical conductivity increases linearly with frequency below normal interband transitions, which provides optical spectroscopic proof of a 3D Dirac semimetal. In addition, the plasma edge shifts dramatically to lower energy upon temperature cooling, which might be due to the shrinking of the lattice parameters. Additionally, an extremely sharp peak showsmore » up in the frequency-dependent optical conductivity, indicating the presence of a Van Hove singularity in the joint density of state.« less

Effects of phosphogypsum and superphosphate on compost maturity and gaseous emissions during kitchen waste composting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Fan; Beijing Municipal Research Institute of Environmental Protection, Beijing 100037; Li, Guoxue, E-mail: yangfan19870117@126.com

2015-02-15

Highlights: • Effect of phosphogypsum and superphosphate on composting gas emissions was studied. • The reduction mechanisms of composting gas were clarified in this study. • No negative effect was caused on maturity with phosphogypsum and superphosphate. • CH{sub 4} and NH{sub 3} emission was decreased with phosphogypsum and superphosphate addition. • GHG decreased by 17.4% and 7.3% with phosphogypsum and superphosphate addition. - Abstract: This study investigated the effects of phosphogypsum and superphosphate on the maturity and gaseous emissions of composting kitchen waste. Two amended compost treatments were conducted using phosphogypsum and superphosphate as additives with the addition ofmore » 10% of initial raw materials (dry weight). A control treatment was also studied. The treatments were conducted under aerobic conditions in 60-L reactors for 35 days. Maturity indexes were determined, and continuous measurements of CH{sub 4}, N{sub 2}O, and NH{sub 3} were taken. Phosphogypsum and superphosphate had no negative effects on compost maturity, although superphosphate inhibited the temperature rise in the first few days. The addition of phosphogypsum and superphosphate drastically reduced CH{sub 4} emissions (by 85.8% and 80.5%, respectively) and decreased NH{sub 3} emissions (by 23.5% and 18.9%, respectively). However, a slight increase in N{sub 2}O emissions (by 3.2% and 14.8%, respectively) was observed. Composting with phosphogypsum and superphosphate reduced total greenhouse gas emissions by 17.4% and 7.3% respectively.« less

Characteristics of phase-change materials containing oxide nano-additives for thermal storage.

PubMed

Teng, Tun-Ping; Yu, Chao-Chieh

2012-11-06

In this study, the authors report the production of nanocomposite-enhanced phase-change materials (NEPCMs) using the direct-synthesis method by mixing paraffin with alumina (Al2O3), titania (TiO2), silica (SiO2), and zinc oxide (ZnO) as the experimental samples. Al2O3, TiO2, SiO2, and ZnO were dispersed into three concentrations of 1.0, 2.0, and 3.0 wt.%. Through heat conduction and differential scanning calorimeter experiments to evaluate the effects of varying concentrations of the nano-additives on the heat conduction performance and thermal storage characteristics of NEPCMs, their feasibility for use in thermal storage was determined. The experimental results demonstrate that TiO2 is more effective than the other additives in enhancing both the heat conduction and thermal storage performance of paraffin for most of the experimental parameters. Furthermore, TiO2 reduces the melting onset temperature and increases the solidification onset temperature of paraffin. This allows the phase-change heat to be applicable to a wider temperature range, and the highest decreased ratio of phase-change heat is only 0.46%, compared to that of paraffin. Therefore, this study demonstrates that TiO2, added to paraffin to form NEPCMs, has significant potential for enhancing the thermal storage characteristics of paraffin.

21 CFR 312.85 - Phase 4 studies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Phase 4 studies. 312.85 Section 312.85 Food and...-debilitating Illnesses § 312.85 Phase 4 studies. Concurrent with marketing approval, FDA may seek agreement from the sponsor to conduct certain postmarketing (phase 4) studies to delineate additional information...

21 CFR 312.85 - Phase 4 studies.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Phase 4 studies. 312.85 Section 312.85 Food and...-debilitating Illnesses § 312.85 Phase 4 studies. Concurrent with marketing approval, FDA may seek agreement from the sponsor to conduct certain postmarketing (phase 4) studies to delineate additional information...

Effect of SiO2 addition and gamma irradiation on the lithium borate glasses

NASA Astrophysics Data System (ADS)

Raut, A. P.; Deshpande, V. K.

2018-01-01

The physical properties like density, glass transition temperature (Tg), and ionic conductivity of lithium borate (LB) glasses with SiO2 addition were measured before and after gamma irradiation. Remarkable changes in properties have been obtained in the physical properties of LB glasses with SiO2 addition and after gamma irradiation. The increase in density and glass transition temperature of LB glasses with SiO2 addition has been explained with the help of increase in density of cross linking due to SiO4 tetrahedra formation. The increase in ionic conductivity with SiO2 addition was explained with the help of ‘mixed glass former effect’. The increase in density and Tg of LB glasses with SiO2 addition after gamma irradiation has been attributed to fragmentation of bigger ring structure into smaller rings, which increases the density of cross linking and hence compaction. The exposure of gamma irradiation has lead to decrease in ionic conductivity of LB glasses with SiO2 addition. The atomic displacement caused by gamma irradiation resulted in filling of interstices and decrease in trapping sites. This explains the obtained decrease in ionic conductivity after gamma irradiation of glasses. The obtained results of effect of SiO2 addition and gamma irradiation on the density, Tg and ionic conductivity has been supported by FTIR results.

Research Advances

ERIC Educational Resources Information Center

King, Angela G.

2007-01-01

Various new cell culture experiments for the development of microparticles are conducted. These studies have also led to the development of an anticancer egg, in addition to the analysis of various vegetable soup chemical reactions.

The effectiveness of selected feed and water additives for reducing Salmonella spp. of public health importance in broiler chickens: a systematic review, meta-analysis, and meta-regression approach.

PubMed

Totton, Sarah C; Farrar, Ashley M; Wilkins, Wendy; Bucher, Oliver; Waddell, Lisa A; Wilhelm, Barbara J; McEwen, Scott A; Rajić, Andrijana

2012-10-01

Eating inappropriately prepared poultry meat is a major cause of foodborne salmonellosis. Our objectives were to determine the efficacy of feed and water additives (other than competitive exclusion and antimicrobials) on reducing Salmonella prevalence or concentration in broiler chickens using systematic review-meta-analysis and to explore sources of heterogeneity found in the meta-analysis through meta-regression. Six electronic databases were searched (Current Contents (1999-2009), Agricola (1924-2009), MEDLINE (1860-2009), Scopus (1960-2009), Centre for Agricultural Bioscience (CAB) (1913-2009), and CAB Global Health (1971-2009)), five topic experts were contacted, and the bibliographies of review articles and a topic-relevant textbook were manually searched to identify all relevant research. Study inclusion criteria comprised: English-language primary research investigating the effects of feed and water additives on the Salmonella prevalence or concentration in broiler chickens. Data extraction and study methodological assessment were conducted by two reviewers independently using pretested forms. Seventy challenge studies (n=910 unique treatment-control comparisons), seven controlled studies (n=154), and one quasi-experiment (n=1) met the inclusion criteria. Compared to an assumed control group prevalence of 44 of 1000 broilers, random-effects meta-analysis indicated that the Salmonella cecal colonization in groups with prebiotics (fructooligosaccharide, lactose, whey, dried milk, lactulose, lactosucrose, sucrose, maltose, mannanoligosaccharide) added to feed or water was 15 out of 1000 broilers; with lactose added to feed or water it was 10 out of 1000 broilers; with experimental chlorate product (ECP) added to feed or water it was 21 out of 1000. For ECP the concentration of Salmonella in the ceca was decreased by 0.61 log(10)cfu/g in the treated group compared to the control group. Significant heterogeneity (Cochran's Q-statistic p≤0.10) was observed among studies examining all organic acids (controlled or challenge experiments), butyric acid, formic acid, a formic/propionic acid mixture, fermented liquid feed, and D-mannose. Meta-regressions were conducted to examine the source of heterogeneity among studies. For prevalence outcomes, 36% and 60% of the total variance was within and between studies, respectively. For concentration outcomes, 39% and 33% of the total variance was within and between studies, respectively. Inadequate blinding and randomization was common, and no studies undergoing meta-analysis or meta-regression were conducted on a commercial farm. The strength of evidence of the effect of these additives was very low. Studies conducted under commercial conditions are needed to understand the potential benefit of these interventions for the poultry industry and to improve the strength of evidence of the effectiveness of these additives. Copyright © 2012 Elsevier B.V. All rights reserved.

Effectiveness and Patient Acceptability of Stellate Ganglion Block (SGB) for Treatment of Posttraumatic Stress Disorder (PTSD) Symptoms among Active Duty Military Members

DTIC Science & Technology

PTSD) symptoms. We will conduct two parallel studies: a randomized, controlled trial (RCT) to evaluate the effectiveness of SGB for treating PTSD, and a...study, individuals enrolled in the RCT will be asked to participate either in a focus group or an interview with their spouse. In addition, we will...conduct focus groups and key informant interviews with providers: those who refer individuals to the study, and those who provide SGB to service members.

20 CFR 655.154 - Additional positive recruitment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Additional positive recruitment. 655.154... recruitment. (a) Where to conduct additional positive recruitment. The employer must conduct positive recruitment within a multistate region of traditional or expected labor supply where the CO finds that there...

Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids

NASA Astrophysics Data System (ADS)

Mehrali, Mohammad; Sadeghinezhad, Emad; Rashidi, Mohammad Mehdi; Akhiani, Amir Reza; Tahan Latibari, Sara; Mehrali, Mehdi; Metselaar, Hendrik Simon Cornelis

2015-06-01

Electrical conductivity is an important property for technological applications of nanofluids that have not been widely investigated, and few studies have been concerned about the electrical conductivity. In this study, nitrogen-doped graphene (NDG) nanofluids were prepared using the two-step method in an aqueous solution of 0.025 wt% Triton X-100 as a surfactant at several concentrations (0.01, 0.02, 0.04, 0.06 wt%). The electrical conductivity of the aqueous NDG nanofluids showed a linear dependence on the concentration and increased up to 1814.96 % for a loading of 0.06 wt% NDG nanosheet. From the experimental data, empirical models were developed to express the electrical conductivity as functions of temperature and concentration. It was observed that increasing the temperature has much greater effect on electrical conductivity enhancement than increasing the NDG nanosheet loading. Additionally, by considering the electrophoresis of the NDG nanosheets, a straightforward electrical conductivity model is established to modulate and understand the experimental results.

Operando Multi-modal Synchrotron Investigation for Structural and Chemical Evolution of Cupric Sulfide (CuS) Additive in Li-S battery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Ke; Zhao, Chonghang; Lin, Cheng-Hung

Conductive metal sulfides are promising multi-functional additives for future lithium-sulfur (Li-S) batteries. These can increase the sulfur cathode’s electrical conductivity to improve the battery’s power capability, as well as contribute to the overall cell-discharge capacity. This multi-functional electrode design showed initial promise; however, complicated interactions at the system level are accompanied by some detrimental side effects. The metal sulfide additives with a chemical conversion as the reaction mechanism, e.g., CuS and FeS 2, can increase the theoretical capacity of the Li-S system. However, these additives may cause undesired parasitic reactions, such as the dissolution of the additive in the electrolyte.more » Studying such complex reactions presents a challenge because it requires experimental methods that can track the chemical and structural evolution of the system during an electrochemical process. To address the fundamental mechanisms in these systems, we employed an operando multimodal x-ray characterization approach to study the structural and chemical evolution of the metal sulfide—utilizing powder diffraction and fluorescence imaging to resolve the former and absorption spectroscopy the latter—during lithiation and de-lithiation of a Li-S battery with CuS as the multi-functional cathode additive. The resulting elucidation of the structural and chemical evolution of the system leads to a new description of the reaction mechanism.« less

Operando Multi-modal Synchrotron Investigation for Structural and Chemical Evolution of Cupric Sulfide (CuS) Additive in Li-S battery

DOE PAGES

Sun, Ke; Zhao, Chonghang; Lin, Cheng-Hung; ...

2017-10-11

Conductive metal sulfides are promising multi-functional additives for future lithium-sulfur (Li-S) batteries. These can increase the sulfur cathode’s electrical conductivity to improve the battery’s power capability, as well as contribute to the overall cell-discharge capacity. This multi-functional electrode design showed initial promise; however, complicated interactions at the system level are accompanied by some detrimental side effects. The metal sulfide additives with a chemical conversion as the reaction mechanism, e.g., CuS and FeS 2, can increase the theoretical capacity of the Li-S system. However, these additives may cause undesired parasitic reactions, such as the dissolution of the additive in the electrolyte.more » Studying such complex reactions presents a challenge because it requires experimental methods that can track the chemical and structural evolution of the system during an electrochemical process. To address the fundamental mechanisms in these systems, we employed an operando multimodal x-ray characterization approach to study the structural and chemical evolution of the metal sulfide—utilizing powder diffraction and fluorescence imaging to resolve the former and absorption spectroscopy the latter—during lithiation and de-lithiation of a Li-S battery with CuS as the multi-functional cathode additive. The resulting elucidation of the structural and chemical evolution of the system leads to a new description of the reaction mechanism.« less

Effect of Excess Lead and Bismuth Content on the Electrical Properties of High-Temperature Bismuth Scandium Lead Titanate Ceramics

NASA Technical Reports Server (NTRS)

Sehirlioglu, Alp; Sayir, Ali

2008-01-01

Aeronautic and aerospace applications require piezoelectric materials that can operate at high temperatures. The air-breathing aeronautic engines can use piezoelectric actuators for active combustion control for fuel modulation to mitigate thermo-acoustic instabilities and/or gas flow control to improve efficiency. The principal challenge for the insertion of piezoelectric materials is their limitation for upper use temperature and this limitation is due low Curie temperature and increasing conductivity. We investigated processing, microstructure and property relationship of (1-x)BiScO3-(x)PbTiO3 (BS-PT) composition as a promising high temperature piezoelectric. The effect of excess Pb and Bi and their partitioning in grain boundaries were studied using impedance spectroscopy, ferroelectric, and piezoelectric measurement techniques. Excess Pb addition increased the grain boundary conduction and the grain boundary area (average grain size was 24.8 m, and 1.3 m for compositions with 0at.% and 5at.% excess Pb, respectively) resulting in ceramics with higher AC conductivity (tan d= 0.9 and 1.7 for 0at.% and 5at.% excess Pb at 350 C and at 10kHz) that were not resistive enough to pole. Excess Bi addition increased the resistivity (rho= 4.1x10(exp 10) Omega cm and 19.6 x10(exp 10) Omega.cm for compositions with 0at.% and 5at.% excess Bi, respectively), improved poling, and increased the piezoelectric coefficient from 137 to 197 pC/N for 5at.% excess Bi addition. In addition, loss tangent decreased more than one order of magnitude at elevated temperatures (greater than 300 C). For all compositions the activation energy of the conducting species was similar (approximately equal to 0.35-0.40 eV) and indicated electronic conduction.

Heat Transfer Enhancement of Metal Hydride Particle Bed for Heat Driven Type Refrigerator by Carbon Fiber

NASA Astrophysics Data System (ADS)

Bae, Sang-Chul; Tanae, Takayuki; Monde, Masanori; Katsuta, Masafumi

A series of study has been performed on the metal hydride particle beds of Ti0.15Zr0.85Cr0.9Fe0.6Ni0.2Mn0.3Cu0.05 (MH-1, using for heat source), Ti0.73Zr0.27Cr1.2Fe0.3Ni0.1Mn0.4Cu0.05 (MH-2, using for cooling load) to measure the effective thermal conductivities. The effective thermal conductivities of activated and oxidized MH particle bed in helium have been examined. Experiment results show that pressure has great influence on effective thermal conductivity in low pressure range (<0.5 MPa). And that influence decreases rapidly with increase of gas pressure. The reason of pressure dependence at low pressure range is that the mean free path of gas becomes greater than effective thickness of gas film which is important to the heat transfer mechanism of particle bed. In order to enhance the poor thermal conductivity of metal hydride particle bed, carbon fiber mixing method has been used in this study. Three types, two insert methods and five mass percentages of carbon fiber have been examined and compared. The highest effective thermal conductivity of MH particle bed has been reached with Type B carbon fiber which has second higher thermal conductivity, and 2 weight percentage. This method has acquired 5-6 times higher thermal conductivity than pure metal hydride particle beds with quite low quantity of additives, only 2 mass% of carbon fiber. This is a good result comparing to other method which can reach higher effective thermal conductivity but needs much higher percentage of additives too.

Predicting Impact of Biochar Addition on Soil Hydraulic Properties

NASA Astrophysics Data System (ADS)

Nakhli, S. A. A.; Yudi, Y.; Imhoff, P. T.

2017-12-01

Biochar has been proposed as a soil amendment to improve soil hydraulic properties, including water retention and saturated and unsaturated hydraulic conductivity, for agricultural and environmental applications. However, its effect on hydraulic properties is difficult to predict and often with mixed results: in some cases biochar enhances soil hydraulic properties, while in other cases it degrades them. Despite several published observational studies, there are no models that can reliably predict biochar's impact on soil hydraulic properties. In this project we developed models to describe the effect of addition of a commercial wood biochar pyrolyzed at 550° on soil hydraulic properties in laboratory-scale experiments. The effects of biochar addition at 2% and 6% (w/w) on water retention and saturated and unsaturated hydraulic conductivity were evaluated for silt loam, sandy loam, and loamy sand. The addition of 6% (w/w) biochar increased the available water content of silt loam, sandy loam and loamy sand by 25, 20 and 70%, respectively. The impact of biochar addition on water retention was predicted reasonably well using information on the intra particle pore volume of biochar (mercury porosimetry, N2 and CO2 sorption) and the particle size distribution of the soil/biochar mixture. When amended with 6% biochar, saturated hydraulic conductivity increased 17% for loamy sand, but decreased 30% and 54% for silt loam and sandy loam, respectively. The Kozeny-Carman equation modified to account for changes in inter pore volume predicted saturated hydraulic conductivities of the biochar-amended soils reasonably well, with RMSE ranging from 0.06 to 5.06 cm h-1 for silt loam and loamy sand, respectively. While intra particle pore volume of biochar contributed significantly to higher water retention, changes in hydraulic conductivity were correlated instead with changes in inter pore volume - the large pores between biochar and soil particles.

It Matters How Much You Talk: On the Automaticity of Affective Connotations of First and Second Language Words

ERIC Educational Resources Information Center

Degner, Juliane; Doycheva, Cveta; Wentura, Dirk

2012-01-01

We report the results of an affective priming study conducted with proficient sequential German and French bilinguals to assess automatic affective word processing in L1 and L2. Additionally, a semantic priming task was conducted in both languages. Whereas semantic priming effects occurred in L1 and L2, and significant affective priming effects…

The Clinical Utility of the Proposed DSM-5 Callous-Unemotional Subtype of Conduct Disorder in Young Girls

ERIC Educational Resources Information Center

Pardini, Dustin; Stepp, Stephanie; Hipwell, Alison; Stouthamer-Loeber, Magda; Loeber, Rolf

2012-01-01

Objective: A callous-unemotional (CU) subtype of conduct disorder (CD) has been proposed as an addition to the fifth edition of the "Diagnostic and Statistic Manual of Mental Disorders (DSM-5)." This study tested the hypothesis that young girls with the CU subtype of CD would exhibit more severe antisocial behavior and less severe internalizing…

A Validation of the Student Risk Screening Scale for Internalizing and Externalizing Behaviors: Patterns in Rural and Urban Elementary Schools

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Menzies, Holly M.; Oakes, Wendy P.; Lambert, Warren; Cox, Meredith; Hankins, Katy

2012-01-01

We report findings of two studies, one conducted in a rural school district (N = 982) and a second conducted in an urban district (N = 1,079), offering additional evidence of the reliability and validity of a revised instrument, the Student Risk Screening Scale-Internalizing and Externalizing (SRSS-IE), to accurately detect internalizing and…

The Job Demands-Resources Model: An Analysis of Additive and Joint Effects of Demands and Resources

ERIC Educational Resources Information Center

Hu, Qiao; Schaufeli, Wilmar B.; Taris, Toon W.

2011-01-01

The present study investigated the additive, synergistic, and moderating effects of job demands and job resources on well-being (burnout and work engagement) and organizational outcomes, as specified by the Job Demands-Resources (JD-R) model. A survey was conducted among two Chinese samples: 625 blue collar workers and 761 health professionals. A…

TESTING FOR DEPARTURES FROM ADDITIVITY FOR A 2:1 MIXTURE OF CHLORPYRIFOS AND CARBARYL ON CHOLINESTERASE ACTIVITY IN BRAIN, PLASMA, AND RED BLOOD CELLS OF LONG EVANS RATS.

EPA Science Inventory

Detecting and characterizing interactions among chemicals is an important environmental issue. This study was conducted to test for the existence of a significant departure from additivity for a mixture of two cholinesterase (ChE)-inhibiting pesticides: chlorpyrifos (CPF), an org...

The Effects of Computer-Assisted Instruction on Student Achievement in Addition and Subtraction at First Grade Level.

ERIC Educational Resources Information Center

Spivey, Patsy M.

This study was conducted to determine whether the traditional classroom approach to instruction involving the addition and subtraction of number facts (digits 0-6) is more or less effective than the traditional classroom approach plus a commercially-prepared computer game. A pretest-posttest control group design was used with two groups of first…

Geothermal Case Studies

DOE Data Explorer

Young, Katherine

2014-09-30

database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

Processable high temperature resistant polymer matrix materials

NASA Technical Reports Server (NTRS)

Serafini, T. T.

1975-01-01

Studies conducted with addition-type polyimides are reviewed with emphasis on the development of the Polymerization of Monomer Reactants (PMR) approach, in which PMR occurs on the surface of the reinforcing fibers.

Rocket Based Combined Cycle (RBCC) Propulsion Workshop, volume 2

NASA Technical Reports Server (NTRS)

Chojnacki, Kent T.

1992-01-01

The goal of the Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop, was to impart technology information to the propulsion community with respect to hypersonic combined cycle propulsion capabilities. The major recommendation resulting from this technology workshop was as follows: conduct a systems-level applications study to define the desired propulsion system and vehicle technology requirements for LEO launch vehicles. All SSTO and TSTO options using the various propulsion systems (airbreathing combined cycle, rocket-based combined cycle, and all rocket) must be considered. Such a study should be accomplished as soon as possible. It must be conducted with a consistent set of ground rules and assumptions. Additionally, the study should be conducted before any major expenditures on a RBCC technology development program occur.

Study of the effects of adding Yttrium oxide particles in some physical, thermal, and mechanical properties of heat-curing acrylic resin

NASA Astrophysics Data System (ADS)

Khalil, Bassam I.; Gharkan, Mohammed R.; Ali, Ahmed H.

2018-05-01

Extensively use of hot-curing acrylic in prosthetic dentistry field, increase the needed to modifying its mechanical, thermal, and physical properties. In this work Yttrium oxide had added with different weight fractions, (5%, 10%, 15% and 20%), as reinforcement phase on purpose of developing these properties. Tensile strength, hardness, density, water adsorption, and thermal conductivity had been investigated for prepared composite specimens. The results show that the maximum tensile strength was at (10) % wt. of Y2O3 addition, (19) %more than that of plain acrylic, maximum hardness was at (15) % wt. of Y2O3 addition, (8.5) % more than that of plain acrylic, maximum density was at (20) % wt. of Y2O3 addition, (18.2) % more than that of plain acrylic, maximum decrease in water absorption was at (10) % wt. of Y2O3 addition, (29) % less than that of plain acrylic. Finally the maximum thermal conductivity was at (20) % wt. of Y2O3 addition, (16) % more than that of plain acrylic.

Observational Learning of Academic and Social Behaviors during Small-Group Direct Instruction

ERIC Educational Resources Information Center

Ledford, Jennifer R.; Wolery, Mark

2015-01-01

Many studies have shown that small-group direct instruction is effective and efficient for teaching students with and without disabilities, although relatively few studies have been conducted with heterogeneous groups of preschool participants. In addition, previous studies have primarily assessed whether observational learning occurred for…

Administrator Job Satisfaction in Higher Education

ERIC Educational Resources Information Center

Howard Baldwin, Tonia Toinette

2009-01-01

The purpose of the study was to investigate the job satisfaction of men and women administrators in higher education in four-year public institutions in Alabama. In addition, the study examined whether there was a relationship between gender and overall job satisfaction, work climate, and job structure. In conducting the study, the researcher…

How Questionnaires and Multimedia Measurements collected in the U.S. EPA’s Observational Human Exposure Measurement Studies Inform Exposures

EPA Science Inventory

In the last decade, the U.S. EPA has conducted and/or funded numerous observational humanexposure measurement studies where questionnaires were administered to the study participants in addition tothe collection of multimedia measurements. Questionnaire responses provide ancillar...

Review of Video Prompting Studies for Persons with Developmental Disabilities

ERIC Educational Resources Information Center

Banda, Devender R.; Dogoe, Maud S.; Matuszny, Rose Marie

2011-01-01

We reviewed 18 video prompting studies that were conducted with persons with developmental disabilities. Results across the studies indicate that video prompting is a viable method for improving various domestic, vocational, and independent living skills. In addition, video prompting strategies facilitated maintenance and generalization of learned…

Overview of Materials Qualification Needs for Metal Additive Manufacturing

NASA Astrophysics Data System (ADS)

Seifi, Mohsen; Salem, Ayman; Beuth, Jack; Harrysson, Ola; Lewandowski, John J.

2016-03-01

This overview highlights some of the key aspects regarding materials qualification needs across the additive manufacturing (AM) spectrum. AM technology has experienced considerable publicity and growth in the past few years with many successful insertions for non-mission-critical applications. However, to meet the full potential that AM has to offer, especially for flight-critical components (e.g., rotating parts, fracture-critical parts, etc.), qualification and certification efforts are necessary. While development of qualification standards will address some of these needs, this overview outlines some of the other key areas that will need to be considered in the qualification path, including various process-, microstructure-, and fracture-modeling activities in addition to integrating these with lifing activities targeting specific components. Ongoing work in the Advanced Manufacturing and Mechanical Reliability Center at Case Western Reserve University is focusing on fracture and fatigue testing to rapidly assess critical mechanical properties of some titanium alloys before and after post-processing, in addition to conducting nondestructive testing/evaluation using micro-computerized tomography at General Electric. Process mapping studies are being conducted at Carnegie Mellon University while large area microstructure characterization and informatics (EBSD and BSE) analyses are being conducted at Materials Resources LLC to enable future integration of these efforts via an Integrated Computational Materials Engineering approach to AM. Possible future pathways for materials qualification are provided.

Development of high capacity, high rate lithium ion batteries utilizing metal fiber conductive additives

NASA Astrophysics Data System (ADS)

Ahn, Soonho; Kim, Youngduk; Kim, Kyung Joon; Kim, Tae Hyung; Lee, Hyungkeun; Kim, Myung H.

As lithium ion cells dominate the battery market, the performance improvement is an utmost concern among developers and researchers. Conductive additives are routinely employed to enhance electrode conductivity and capacity. Carbon particulates—graphite or carbon black powders—are conventional and popular choices as conductive fillers. However, percolation requirements of particles demand significant volumetric content of impalpable, and thereby high area conductive fillers. As might be expected, the electrode active surface area escalates unnecessarily, resulting in overall increase in reaction with electrolytes and organic solvents. The increased reactions usually manifest as an irreversible loss of anode capacity, gradual oxidation and consumption of electrolyte on the cathode—which causes capacity decline during cycling—and an increased threat to battery safety by gas evolution and exothermic solvent oxidation. In this work we have utilized high aspect ratio, flexible, micronic metal fibers as low active area and high conductivity additives. The metal fibers appear well dispersed within the electrode and to satisfy percolation requirements very efficiently at very low volumetric content compared to conventional carbon-based conductive additives. Results from 18650-type cells indicate significant enhancements in electrode capacity and high rate capability while the irreversible capacity loss is negligible.

Practical Considerations for Conducting Delphi Studies: The Oracle Enters a New Age.

ERIC Educational Resources Information Center

Eggers, Renee M.; Jones, Charles M.

1998-01-01

In addition to giving an overview of Delphi methodology and describing the methodology used by the researchers in two Delphi studies, the authors provide information about electronic communication in Delphi studies. Also provided are suggestions that can be used in a Delphi study involving any form of communication. (SLD)

A Study of Cigarett Smoking Among Adults.

ERIC Educational Resources Information Center

Mausner, Bernard

The various activities carried out under a grant from the Cancer Society are discussed, including preparatory work, pilot and exploratory studies, the conduct of the major study, and additional activities. The bulk of the report, however, is devoted to the major study in which measures were obtained of: 1) patterns of support for smoking; 2)…

A Fundamental Study of Laser Beam Welding Aluminum-Lithium Alloy 2195 for Cryogenic Tank Applications

NASA Technical Reports Server (NTRS)

Martukanitz, R. P.; Jan. R.

1996-01-01

Based on the potential for decreasing costs of joining stiffeners to skin by laser beam welding, a fundamental research program was conducted to address the impediments identified during an initial study involving laser beam welding of aluminum-lithium alloys. Initial objectives of the program were the identification of governing mechanism responsible for process related porosity while establishing a multivariant relationship between process parameters and fusion zone geometry for laser beam welds of alloy 2195. A three-level fractional factorial experiment was conducted to establish quantitative relationships between primary laser beam processing parameters and critical weld attributes. Although process consistency appeared high for welds produced during partial completion of this study, numerous cracks on the top-surface of the welds were discovered during visual inspection and necessitated additional investigations concerning weld cracking. Two experiments were conducted to assess the effect of filler alloy additions on crack sensitivity: the first experiment was used to ascertain the effects of various filler alloys on cracking and the second experiment involved modification to process parameters for increasing filler metal dilution. Results indicated that filler alloys 4047 and 4145 showed promise for eliminating cracking.

Meta-analysis identifies common variants associated with body mass index in East Asians

PubMed Central

Wen, Wanqing; Cho, Yoon Shin; Zheng, Wei; Dorajoo, Rajkumar; Kato, Norihiro; Qi, Lu; Chen, Chien-Hsiun; Delahanty, Ryan J.; Okada, Yukinori; Tabara, Yasuharu; Gu, Dongfeng; Zhu, Dingliang; Haiman, Christopher A.; Mo, Zengnan; Gao, Yu-Tang; Saw, Seang Mei; Go, Min Jin; Takeuchi, Fumihiko; Chang, Li-Ching; Kokubo, Yoshihiro; Liang, Jun; Hao, Mei; Marchand, Loic Le; Zhang, Yi; Hu, Yanling; Wong, Tien Yin; Long, Jirong; Han, Bok-Ghee; Kubo, Michiaki; Yamamoto, Ken; Su, Mei-Hsin; Miki, Tetsuro; Henderson, Brian E.; Song, Huaidong; Tan, Aihua; He, Jiang; Ng, Daniel P.-K.; Cai, Qiuyin; Tsunoda, Tatsuhiko; Tsai, Fuu-Jen; Iwai, Naoharu; Chen, Gary K.; Shi, Jiajun; Xu, Jianfeng; Sim, Xueling; Xiang, Yong-Bing; Maeda, Shiro; Ong, Rick T.H.; Li, Chun; Nakamura, Yusuke; Aung, Tin; Kamatani, Naoyuki; Liu, Jian Jun; Lu, Wei; Yokota, Mitsuhiro; Seielstad, Mark; Fann, Cathy S.J.; Wu, Jer-Yuarn; Lee, Jong-Young; Hu, Frank B.; Tanaka, Toshihiro; Tai, E. Shyong; Shu, Xiao Ou

2012-01-01

Multiple genetic loci associated with obesity or body mass index (BMI) have been identified through genome-wide association studies conducted predominantly in populations of European ancestry. We conducted a meta-analysis of associations between BMI and approximately 2.4 million SNPs in 27,715 East Asians, followed by in silico and de novo replication in 37,691 and 17,642 additional East Asians, respectively. We identified ten BMI-associated loci at the genome-wide significance level (P<5.0×10−8), including seven previously identified loci (FTO, SEC16B, MC4R, GIPR/QPCTL, ADCY3/RBJ, BDNF, and MAP2K5) and three novel loci in or near the CDKAL1,PCSK1, and GP2 genes. Three additional loci nearly reached the genome-wide significance threshold, including two previously identified loci in the GNPDA2 and TFAP2B genes and a new locus near PAX6, which all had P<5.0×10−7. Findings from this study may shed light on new pathways involved in obesity and demonstrate the value of conducting genetic studies in non-European populations. PMID:22344219

Lightweight magnesium nanocomposites: electrical conductivity of liquid magnesium doped by CoPd nanoparticles

NASA Astrophysics Data System (ADS)

Yakymovych, Andriy; Slabon, Adam; Plevachuk, Yuriy; Sklyarchuk, Vasyl; Sokoliuk, Bohdan

2018-04-01

The effect of monodisperse bimetallic CoPd NP admixtures on the electrical conductivity of liquid magnesium was studied. Temperature dependence of the electrical conductivity of liquid Mg98(CoPd)2, Mg96(CoPd)4, and Mg92(CoPd)8 alloys was measured in a wide temperature range above the melting point by a four-point method. It was shown that the addition of even small amount of CoPd nanoparticles to liquid Mg has a significant effect on the electrical properties of the melts obtained.

Operations NOUGAT and WHETSTONE Events: HARD HAT, DANNY BOY, MARSHMALLOW, MUDPACK, WISHBONE, GUMDROP, DILUTED WATERS, and TINY TOT, 15 February 1962-17 June 1965.

DTIC Science & Technology

1984-01-31

were conducted to study weapons effects from 15 February 1962 to 17 June 1965. ,Four were shaft-type, three were tunnel- type, and one was a crater...Of the 194 nuclear device tests conducted, 161 were for weapons development or effects purposes, and 33 were safety ex- periments. An additional 22...testing on 25 April 1962 until the last atmospheric test on 4 November 1962, 40 weapons development and weapons effects tests were conducted as part of the

Development of high strength ferritic steel for interconnect application in SOFCs

NASA Astrophysics Data System (ADS)

Froitzheim, J.; Meier, G. H.; Niewolak, L.; Ennis, P. J.; Hattendorf, H.; Singheiser, L.; Quadakkers, W. J.

High-Cr ferritic model steels containing various additions of the refractory elements Nb and/or W were studied with respect to oxidation behaviour (hot) tensile properties, creep behaviour and high-temperature electrical conductivity of the surface oxide scales. Whereas W additions of around 2 wt.% had hardly any effect on the oxidation rates at 800 and 900 °C, Nb additions of 1% led to a substantially enhanced growth rate of the protective surface oxide scale. It was found that this adverse effect can be alleviated by suitable Si additions. This is related to the incorporation of Si and Nb into Laves phase precipitates which also contribute to increased creep and hot tensile strength. The dispersion of Laves phase precipitates was greatly refined by combined additions of Nb and W. The high-temperature electrical conductivity of the surface oxide scales was similar to that of the Nb/W-free alloys. Thus the combined additions of Nb, W and Si resulted in an alloy with oxidation resistance, ASR contribution and thermal expansion comparable to the commercial alloy Crofer 22 APU, but with creep strength far greater than that of Crofer 22 APU.

Studies on the thermal and electrical properties of polyethylene oxide/polyvinyl alcohol blend by incorporating of Cesium Chloride

NASA Astrophysics Data System (ADS)

Ragab, H. M.

The composites PVA/PEO filled with various concentrations of CsCl samples, which were prepared for using a solvent casting technique and studied via Fourier transform infrared spectroscopy (FTIR), ultraviolet - visible (UV-Vis), X-ray spectroscopy, Scanning electron microscopy (SEM), AC conductivity and dielectric properties to use as sensor in electronic devices. The FTIR indicated the interaction between PVA/PEO and CsCl. From data of UV. Vis. was observed band gap (Eg) reduces with addition CsCl to polymer blend. The XRD shows the degree of crystallinity (χ%) decreasing with increasing concentration of CsCl from 2.93 to 2.45. The SEM of the surface of composite PVA/PEO filled with various concentrations of CsCl in magnification 1500 times its change with compare of pure blend. From TGA was observed improvement in the thermal stability of the samples after addition of CsCl. The AC conductivity rise more rapidly with temperature and associated with activation energy Ea, for conduction and enhanced with increasing both temperature and frequency.

Low-Temperature Cross-Linking of PEDOT:PSS Films Using Divinylsulfone.

PubMed

Mantione, Daniele; Del Agua, Isabel; Schaafsma, Wandert; ElMahmoudy, Mohammed; Uguz, Ilke; Sanchez-Sanchez, Ana; Sardon, Haritz; Castro, Begoña; Malliaras, George G; Mecerreyes, David

2017-05-31

Recent interest in bioelectronics has prompted the exploration of properties of conducting polymer films at the interface with biological milieus. Poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) from a commercially available source has been used as a model system for these studies. Different cross-linking schemes have been used to stabilize films of this material against delamination and redispersion, but the cost is a decrease in the electrical conductivity and/or additional heat treatment. Here we introduce divinylsulfone (DVS) as a new cross-linker for PEDOT:PSS. Thanks to the higher reactiveness of the vinyl groups of DVS, the cross-linking can be performed at room temperature. In addition, DVS does not reduce electronic conductivity of PEDOT:PSS but rather increases it by acting as a secondary dopant. Cell culture studies show that PEDOT:PSS:DVS films are cytocompatible and support neuroregeneration. As an example, we showed that this material improved the transconductance value and stability of an organic electrochemical transistor (OECT) device. These results open the way for the utilization of DVS as an effective cross-linker for PEDOT:PSS in bioelectronics applications.

Updated Perspectives on Educational Diagnosticians' Understanding of Reading Assessments

ERIC Educational Resources Information Center

Rueter, Jessica A.; McWhorter, Rochell R.; Lamb, John H.; Dykes, Frank O.

2016-01-01

Chappell, Stephens, Kinnison, and Pettigrew (2009) conducted a study investigating educational diagnosticians knowledge of early reading development. Our study replicated the work of Chappell et al. through a mixed methods design that investigated educational diagnosticians' perceptions and knowledge of early reading development. Additionally, our…

THE INFLUENCE OF A NOISE BARRIER AND VEGETATION ON AIR QUALITY NEAR A ROADWAY

EPA Science Inventory

A growing number of epidemiological studies conducted throughout the world have identified an increase in occurrence of adverse health effects for populations residing, working or attending school near major roadways. In addition, several air quality studies have identified incr...

The Science and Applications Tethered Platform (SATP) project

NASA Technical Reports Server (NTRS)

Merlina, P.

1986-01-01

The capabilities of tether systems in orbit are going to be demonstrated by the first planned flights of the Tethered Satellite System (TSS). These test flights will investigate the properties of tether systems as low altitude atmospheric research facilities and as electric power generators. Studies are being conducted with the purpose of testing a variety of concepts and approaches. A comparative analysis of results will allow the choosing of the most promising ideas for further development. The broad range of applications presently under study include applications in electrodynamics, transportation, microgravity in addition to basic research. The SATP project definition study is now about midway through its first phase. The analyses conducted have led to an appraisal of users interest in the project and to a deeper understanding of the problems associated with large, long-lived tether systems in space. In addition, two specialized platform designs, devoted to microgravity and precise pointing applications, are being studied because of their potential usefulness and the promise of technical feasibility.

Effects of test design and temperature in a partial life-cycle study with the freshwater gastropod Potamopyrgus antipodarum.

PubMed

Macken, Ailbhe; Le Page, Gareth; Hayfield, Amanda; Williams, Timothy D; Brown, Rebecca J

2012-09-01

Potamopyrgus antipodarum is a candidate for a standardized mollusk partial life-cycle study. This is a comparative study of two test designs (microplate and beaker), with additional endpoints to the proposed guideline methods, for example, tracking of continuous reproductive output over 28 d and attributing it to individual female snails. In addition, an investigation of the effects of temperature (16, 20, and 25°C) on reproduction was also conducted employing the microplate design. Copyright © 2012 SETAC.

A Case Study of Educational Computer Game Design by Middle School Students

ERIC Educational Resources Information Center

An, Yun-Jo

2016-01-01

Only a limited number of research studies have investigated how students design educational computer games and its impact on student learning. In addition, most studies on educational game design by students were conducted in the areas of mathematics and science. Using the qualitative case study approach, this study explored how seventh graders…

A Study on Basic Process Skills of Turkish Primary School Students

ERIC Educational Resources Information Center

Aydogdu, Bulent

2017-01-01

Purpose: The purpose of this study was to find out primary school students' basic process skills (BPSs) in terms of select variables. In addition, this study aims to investigate the relationship between BPSs and academic achievement. Research Methods: The study had a survey design and was conducted with 1272 primary school students. The study data…

Visualizing preparation using asymmetrical choline-like ionic liquids for scanning electron microscope observation of non-conductive biological samples.

PubMed

Abe, Shigeaki; Hyono, Atsushi; Kawai, Koji; Yonezawa, Tetsu

2014-03-01

In this study, we investigated conductivity preparation for scanning electron microscope (SEM) observation that used novel asymmetrical choline-type room temperature ionic liquids (RTIL). By immersion in only an RTIL solution, clear SEM images of several types of biological samples were successfully observed. In addition, we could visualize protozoans using RTILs without any dilution. These results suggested that the asymmetrical choline-type RTILs used in this study are suitable for visualizing of biological samples by SEM. Treatment without the need for dilution can obviate the need for adjusting the RTIL concentration and provide for a rapid and easy conductivity treatment for insulating samples.

Automatic Parameterization Strategy for Cardiac Electrophysiology Simulations.

PubMed

Costa, Caroline Mendonca; Hoetzl, Elena; Rocha, Bernardo Martins; Prassl, Anton J; Plank, Gernot

2013-10-01

Driven by recent advances in medical imaging, image segmentation and numerical techniques, computer models of ventricular electrophysiology account for increasingly finer levels of anatomical and biophysical detail. However, considering the large number of model parameters involved parameterization poses a major challenge. A minimum requirement in combined experimental and modeling studies is to achieve good agreement in activation and repolarization sequences between model and experiment or patient data. In this study, we propose basic techniques which aid in determining bidomain parameters to match activation sequences. An iterative parameterization algorithm is implemented which determines appropriate bulk conductivities which yield prescribed velocities. In addition, a method is proposed for splitting the computed bulk conductivities into individual bidomain conductivities by prescribing anisotropy ratios.

5 CFR 1001.101 - In addition to this part, what other rules of conduct apply to Office of Personnel Management...

Code of Federal Regulations, 2010 CFR

2010-01-01

... rules of conduct apply to Office of Personnel Management employees? 1001.101 Section 1001.101 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) REGULATIONS GOVERNING EMPLOYEES OF THE OFFICE OF PERSONNEL MANAGEMENT OPM EMPLOYEE RESPONSIBILITIES AND CONDUCT § 1001.101 In addition to this part...

5 CFR 1001.101 - In addition to this part, what other rules of conduct apply to Office of Personnel Management...

Code of Federal Regulations, 2011 CFR

2011-01-01

... rules of conduct apply to Office of Personnel Management employees? 1001.101 Section 1001.101 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) REGULATIONS GOVERNING EMPLOYEES OF THE OFFICE OF PERSONNEL MANAGEMENT OPM EMPLOYEE RESPONSIBILITIES AND CONDUCT § 1001.101 In addition to this part...

Space Station Freedom power management and distribution system design

NASA Technical Reports Server (NTRS)

Teren, Fred

1989-01-01

The design is described of the Space Station Freedom Power Management and Distribution (PMAD) System. In addition, the significant trade studies which were conducted are described, which led to the current PMAD system configuration.

Characteristics of phase-change materials containing oxide nano-additives for thermal storage

PubMed Central

2012-01-01

In this study, the authors report the production of nanocomposite-enhanced phase-change materials (NEPCMs) using the direct-synthesis method by mixing paraffin with alumina (Al2O3), titania (TiO2), silica (SiO2), and zinc oxide (ZnO) as the experimental samples. Al2O3, TiO2, SiO2, and ZnO were dispersed into three concentrations of 1.0, 2.0, and 3.0 wt.%. Through heat conduction and differential scanning calorimeter experiments to evaluate the effects of varying concentrations of the nano-additives on the heat conduction performance and thermal storage characteristics of NEPCMs, their feasibility for use in thermal storage was determined. The experimental results demonstrate that TiO2 is more effective than the other additives in enhancing both the heat conduction and thermal storage performance of paraffin for most of the experimental parameters. Furthermore, TiO2 reduces the melting onset temperature and increases the solidification onset temperature of paraffin. This allows the phase-change heat to be applicable to a wider temperature range, and the highest decreased ratio of phase-change heat is only 0.46%, compared to that of paraffin. Therefore, this study demonstrates that TiO2, added to paraffin to form NEPCMs, has significant potential for enhancing the thermal storage characteristics of paraffin. PMID:23127224

Thermal properties of zirconium diboride -- transition metal boride solid solutions

NASA Astrophysics Data System (ADS)

McClane, Devon Lee

This research focuses on the thermal properties of zirconium diboride (ZrB2) based ceramics. The overall goal was to improve the understanding of how different transition metal (TM) additives influence thermal transport in ZrB2. To achieve this, ZrB2 with 0.5 wt% carbon, and 3 mol% of individual transition metal borides, was densified by hot-press sintering. The transition metals that were investigated were: Y, Ti, Hf, V, Nb, Ta, Cr, Mo, W, and Re. The room temperature thermal diffusivities of the compositions ranged from 0.331 cm2/s for nominally pure ZrB2 to 0.105 cm2/s for (Zr,Cr)B2 and converged around 0.155cm2/s at higher temperatures for all compositions. Thermal conductivities were calculated from the diffusivities, using temperature-dependent values for density and heat capacity. The electron contribution to thermal conductivity was calculated from measured electrical resistivity according to the Wiedemann-Franz law. The phonon contribution to thermal conductivity was calculated by subtracting the electron contribution from the total thermal conductivity. Rietveld refinement of x-ray diffraction data was used to determine the lattice parameters of the compositions. The decrease in thermal conductivity for individual additives correlated directly to the metallic radius of the additive. Additional strain appeared to exist for additives when the stable TM boride for that metal had different crystal symmetries than ZrB2. This research provided insight into how additives and impurities affect thermal transport in ZrB2. The research potentially offers a basis for future modeling of thermal conductivity in ultra-high temperature ceramics based on the correlation between metallic radius and the decrease in thermal conductivity.

Effects of phosphogypsum and superphosphate on compost maturity and gaseous emissions during kitchen waste composting.

PubMed

Yang, Fan; Li, Guoxue; Shi, Hong; Wang, Yiming

2015-02-01

This study investigated the effects of phosphogypsum and superphosphate on the maturity and gaseous emissions of composting kitchen waste. Two amended compost treatments were conducted using phosphogypsum and superphosphate as additives with the addition of 10% of initial raw materials (dry weight). A control treatment was also studied. The treatments were conducted under aerobic conditions in 60-L reactors for 35 days. Maturity indexes were determined, and continuous measurements of CH4, N2O, and NH3 were taken. Phosphogypsum and superphosphate had no negative effects on compost maturity, although superphosphate inhibited the temperature rise in the first few days. The addition of phosphogypsum and superphosphate drastically reduced CH4 emissions (by 85.8% and 80.5%, respectively) and decreased NH3 emissions (by 23.5% and 18.9%, respectively). However, a slight increase in N2O emissions (by 3.2% and 14.8%, respectively) was observed. Composting with phosphogypsum and superphosphate reduced total greenhouse gas emissions by 17.4% and 7.3% respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

Study of Dielectric Behavior and Charge Conduction Mechanism of Poly(Vinyl Alcohol) (PVA)-Copper (Cu) and Gold (Au) Nanocomposites as a Bio-resorbable Material for Organic Electronics

NASA Astrophysics Data System (ADS)

Mahendia, Suman; Goyal, Parveen Kumar; Tomar, Anil Kumar; Chahal, Rishi Pal; Kumar, Shyam

2016-10-01

Poly(vinyl alcohol) (PVA) embedded with varying concentrations of chemically synthesized copper (Cu) and gold (Au) nanoparticles (NPs) were prepared using ex situ sol-gel casting method. The addition of almost the same concentration of CuNPs in PVA improves the conducting properties, while that of AuNPs improves the dielectric nature of composite films. It has been found that addition of AuNPs up to ˜0.4 wt.% concentration enhaneces the capacitive nature due to the formation of small Coulomb tunneling knots as internal capacitors. The dielectric studies suggest the Maxwell-Wagner interfacial polarization as the dominant dielectric relaxation process, whereas the I- V characteristics indicate bulk limited Poole-Frenkel emission at high voltages as the dominant charge transport mechanism operating at room temperature in all specimens. These novel features lead to the conclusion that addition of a small quantity of metal nanoparticles can help tune the properties of PVA for desired applications in bio-compatible polymer-based organic electronic devices.

75 FR 1589 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... Census Coverage Measurement Recall Bias Panel Study has been added. Two previous notices were published... Reinterview, and Recall Bias Panel Study. OMB Control Number: None. Form Number(s): All data will be collected... different PI enumerator. In addition to the CCM PI Operation, CCM will conduct a Recall Bias Panel Study...

National Alliance of Business Work Force Study.

ERIC Educational Resources Information Center

North Coast Behavioral Research Group, Cleveland, OH.

A study was conducted to determine employers' satisfaction with blue-collar and clerical employees entering the nation's work force. In addition, the study measured employers' perceptions of the ability of their employees to be retrained. A total of 200 executive interviews, of approximately 2 minutes each, were collected from a national sample of…

Domestic Violence Encountered among Kurdish Women

ERIC Educational Resources Information Center

Ali, Sirwan Kamil

2015-01-01

Background and objective; There is growing recognition that violence against women has a large public health impact, in addition to being a gross violation of women's human rights. The study's aims were: To show the types of domestic abuse encountered by Kurdish women, and study the relationship between them. Methods; The study conducted in the…

An Event-Related Potentials Study of Mental Rotation in Identifying Chemical Structural Formulas

ERIC Educational Resources Information Center

Huang, Chin-Fei; Liu, Chia-Ju

2012-01-01

The purpose of this study was to investigate how mental rotation strategies affect the identification of chemical structural formulas. This study conducted event-related potentials (ERPs) experiments. In addition to the data collected in the ERPs, a Chemical Structure Conceptual Questionnaire and interviews were also admin-istered for data…

An Economic Impact Study of Liberty Baptist College on the Lynchburg Metropolitan Area.

ERIC Educational Resources Information Center

Moisan, Leonard J.

A study was conducted to determine Liberty Baptist College's impact on the Lynchburg area in the 1980 fiscal year. Three impact areas were studied: local businesses, governments, and individuals. Local construction expenditures of $5.6 million, additional college-related expenditures of other affiliated organizations, and several other peripheral…

Meta-Analysis of Behavioral Self-Management Interventions in Single-Case Research

ERIC Educational Resources Information Center

Briesch, Amy M.; Briesch, Jacquelyn M.

2016-01-01

The current study meta-analyzed 47 single-subject studies of behavioral self-management interventions that were published between 1971 and 2011. In addition to obtaining an overall measure of effect across all self-management studies (f = 0.93), analyses were conducted to assess whether treatment effectiveness was moderated by factors such as…

Program to develop sprayed, plastically deformable compressor shroud seal materials

NASA Technical Reports Server (NTRS)

Schwab, R. C.

1979-01-01

A study of fundamental rub behavior for ten dense sprayed materials and eight current compressor clearance materials has been conducted. A literature survey of a wide variety of metallurgical and thermophysical properties was conducted and correlated to rub behavior. Based on these results, the most promising dense rub material was Cu-9Al. Additional studies on the effects of porosity, incursion rate, blade solidity and ambient temperature were carried out on aluminum bronze (Cu-9Al-1Fe) with and without a 515B Feltmetal underlayer.

Marshall Space Flight Center Faculty Fellowship Program

NASA Technical Reports Server (NTRS)

Six, N. F.; Karr, G.

2017-01-01

The research projects conducted by the 2016 Faculty Fellows at NASA Marshall Space Flight Center included propulsion studies on propellant issues, and materials investigations involving plasma effects and friction stir welding. Spacecraft Systems research was conducted on wireless systems and 3D printing of avionics. Vehicle Systems studies were performed on controllers and spacecraft instruments. The Science and Technology group investigated additive construction applied to Mars and Lunar regolith, medical uses of 3D printing, and unique instrumentation, while the Test Laboratory measured pressure vessel leakage and crack growth rates.

Free-boundary toroidal Alfvén eigenmodes

NASA Astrophysics Data System (ADS)

Chen, Eugene Y.; Berk, H. L.; Breizman, B.; Zheng, L. J.

2011-05-01

A numerical study is presented for the n = 1 free-boundary toroidal Alfvén eigenmodes (TAE) in tokamaks, which shows that there is considerable sensitivity of n = 1 modes to the position of the conducting wall. An additional branch of the TAE is shown to emerge from the upper continuum as the ratio of conducting wall radius to plasma radius increases. Such phenomena arise in plasma equilibria with both circular and shaped cross sections, where the shaped profile studied here is similar to that found in Alcator C-Mod.

A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes.

PubMed

Higgins, Thomas M; Park, Sang-Hoon; King, Paul J; Zhang, Chuanfang John; McEvoy, Niall; Berner, Nina C; Daly, Dermot; Shmeliov, Aleksey; Khan, Umar; Duesberg, Georg; Nicolosi, Valeria; Coleman, Jonathan N

2016-03-22

This work describes silicon nanoparticle-based lithium-ion battery negative electrodes where multiple nonactive electrode additives (usually carbon black and an inert polymer binder) are replaced with a single conductive binder, in this case, the conducting polymer PSS. While enabling the production of well-mixed slurry-cast electrodes with high silicon content (up to 95 wt %), this combination eliminates the well-known occurrence of capacity losses due to physical separation of the silicon and traditional inorganic conductive additives during repeated lithiation/delithiation processes. Using an in situ secondary doping treatment of the PSS with small quantities of formic acid, electrodes containing 80 wt % SiNPs can be prepared with electrical conductivity as high as 4.2 S/cm. Even at the relatively high areal loading of 1 mg/cm(2), this system demonstrated a first cycle lithiation capacity of 3685 mA·h/g (based on the SiNP mass) and a first cycle efficiency of ∼78%. After 100 repeated cycles at 1 A/g this electrode was still able to store an impressive 1950 mA·h/g normalized to Si mass (∼75% capacity retention), corresponding to 1542 mA·h/g when the capacity is normalized by the total electrode mass. At the maximum electrode thickness studied (∼1.5 mg/cm(2)), a high areal capacity of 3 mA·h/cm(2) was achieved. Importantly, these electrodes are based on commercially available components and are produced by the standard slurry coating methods required for large-scale electrode production. Hence, the results presented here are highly relevant for the realization of commercial LiB negative electrodes that surpass the performance of current graphite-based negative electrode systems.

Nursing Education Follow-Up Study--1982 R.N.'s.

ERIC Educational Resources Information Center

Scott, David C.

In 1982, a follow-up study of nursing graduates of the Bakersfield College Registered Nursing (RN) program was conducted to obtain information that would lead to improvement in program quality and to a better match between supply and demand in the local nursing labor market. In addition, the study compared results with similar studies conducted…

Simultaneous measurement of skin potential and conductance in electrodermal response monitoring

NASA Astrophysics Data System (ADS)

Jabbari, A.; Johnsen, B.; Grimnes, S.; Martinsen, Ø. G.

2010-04-01

Measurement of electrodermal activity (EDA) has been an important tool in psychophysiological research. The emotional sweat activity is very sensitive to psychological stimuli or conditions. The changes are easily detected by means of electrical measurements and since the sweat ducts are predominantly resistive, a low-frequency conductance measurement is appropriate for measurement of skin conductance in electrodermal response. The main purpose of this study was to develop a measuring system where DC current was replaced by a small AC current in a system so the DC potential and AC conductance could be measured simultaneously at the same skin site. A small, battery operated, PDA based instrument has been developed. The preliminary results of this ongoing study show that there is additional information in the DC potential channel and that different stimuli seem to produce slightly different response patterns.

The impact of multiple show-ups on eyewitness decision-making and innocence risk.

PubMed

Smith, Andrew M; Bertrand, Michelle; Lindsay, R C L; Kalmet, Natalie; Grossman, Deborah; Provenzano, Daniel

2014-09-01

If an eyewitness rejects a show-up, police may respond by finding a new suspect and conducting a second show-up with the same eyewitness. Police may continue finding suspects and conducting show-ups until the eyewitness makes an identification (Study 1). Relatively low criterion-setting eyewitnesses filter themselves out of the multiple show-ups procedure by choosing the first suspect with whom they are presented (Studies 2 and 3). Accordingly, response bias was more stringent on the second show-up when compared with the first, but became no more stringent with additional show-ups. Despite this stringent shift in response bias, innocence risk increased with additional show-ups, as false alarms cumulate (Studies 2 and 3). Although unbiased show-up instructions decreased innocent suspect identifications, the numbers were still discouraging (Study 4). Given the high number of innocent suspects who would be mistakenly identified through the use of multiple show-up procedures, using such identifications as evidence of guilt is questionable. Although evidence of guilt is limited to identifications from a single show-up, practical constraints might sometimes require police to use additional show-ups. Accordingly, we propose a stronger partition between evidentiary and investigative procedures. PsycINFO Database Record (c) 2014 APA, all rights reserved.

30 CFR 250.406 - What additional safety measures must I take when I conduct drilling operations on a platform that...

Code of Federal Regulations, 2010 CFR

2010-07-01

... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations General Requirements § 250.406 What additional safety measures must I take when I conduct drilling... when I conduct drilling operations on a platform that has producing wells or has other hydrocarbon flow...

Technical note: In vitro digestibility of amylase-treated, ash-corrected neutral detergent fiber, with addition of sodium sulfite, at 240 hours with or without rumen fluid reinoculation.

PubMed

Palmonari, A; Canestrari, G; Bonfante, E; Fustini, M; Mammi, L; Formigoni, A

2017-02-01

Long-term in vitro fermentation (240 h) evaluating amylase-treated, ash-corrected neutral detergent fiber, with addition of sodium sulfite (aNDFom) digestibility is required to quantify the indigestible fiber fraction. It is commonly accepted to inoculate rumen fluid more than one time during such fermentations, every 96 h or at 120 h. However, no studies have been conducted to verify if the reinoculation is actually required to properly carry out the fermentation process. The current study aims to evaluate the effects of these procedures on aNDFom digestibility at 240 h. The study was conducted on a total of 24 forage samples (8 alfalfa hays, 8 grass hays, and 8 corn silages). Samples were digested in triplicate at 240 h in vitro. Rumen fluid was added twice (at 96 and 192 h) in treatment 1, after 120 h in treatment 2, whereas no addition was made in treatment 3. At the end of the fermentations, residual aNDFom was quantified to calculate digestibility. Among treatments, no difference was found in digestibility of aNDFom. Moreover, treatment 1 resulted in higher variability compared with other treatments. Results obtained in the current study show that subsequent addition of rumen fluid is not necessary for a proper estimation of aNDFom digestibility, and can be avoided. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

10 CFR 33.17 - Conditions of specific licenses of broad scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... shall not: (1) Conduct tracer studies in the environment involving direct release of byproduct material... required; or (4) Add or cause the addition of byproduct material to any food, beverage, cosmetic, drug, or...

Synthesis and characterization of PVA blended LiClO4 as electrolyte material for battery Li-ion

NASA Astrophysics Data System (ADS)

Gunawan, I.; Deswita; Sugeng, B.; Sudaryanto

2017-07-01

It have been synthesized the materials for Li ion battery electrolytes, namely PVA with the addition of LiClO4 salt were varied 0, 5, 10, 15 and 20% by weight respectively. The objective of this study is to control the ionic conductivity in traditional polymer electrolytes, to improve ionic conductivity with the addition of lithium perchlorat (LiClO4). These electrolyte materials prepared by PVA powder was dissolved into distilled water and added LiClO4 salt were varied. After drying the solution, PVA sheet blended LiClO4 salt as electrolyte material for Li ion battery obtained. PVA blended LiClO4 salt crystallite form was confirmed using X-Ray Difraction (XRD) equipment. Observation of the morphology done by using Scanning Electron Microscope (SEM). While the electrical conductivity of the material is measured using LCR meter. The results of XRD pattern of LiClO4 shows intense peaks at angles 2θ = 23.2, 32.99, and 36.58°, which represent the crystalline nature of the salt. Particles morphology of the sample revealed by scanning electron microscopy are irregular in shape and agglomerated, with mean size 200-300 nm. It can be concluded that polycrystalline particles are composed of large number of crystallites. The study of conductivity by using LCR meter shows that all the graphs represent the DC and AC conductivity phenomena.

Therapists' Use of DBT: A Survey Study of Clinical Practice

ERIC Educational Resources Information Center

DiGiorgio, Kimberly E.; Glass, Carol R.; Arnkoff, Diane B.

2010-01-01

The purpose of this study was to examine how therapists conduct Dialectical Behavior Therapy (DBT) individual psychotherapy with clients, focusing on clinical factors that could account for decisions regarding modifications of DBT (e.g., client diagnosis, therapist theoretical orientation, and intensity of DBT training). Additionally, the study…

Experiential Learning: A Review of College Health Centers

ERIC Educational Resources Information Center

Greaney, Elizabeth J.

2010-01-01

This exploratory study was conducted using a descriptive design and examined the use of college health centers for academic internships and clinical rotations. In addition, the study examined the relationship among health center director and school characteristics and the presence of academic internships or clinical rotations and the directors'…

What Research Says about Keyboarding Skills and Computer Anxiety.

ERIC Educational Resources Information Center

Artwohl, Mary Jane

A literature search identified 14 studies that were examined concerning keyboarding and computer anxiety. Although research on the relationship between keyboarding skills and computer anxiety is scarce, studies are being conducted to measure the effects of basic keyboarding skills on increased productivity. In addition, research is being performed…

A Method to Assess Work Task Preferences

ERIC Educational Resources Information Center

Cobigo, Virginie; Morin, Diane; Lachapelle, Yves

2009-01-01

Persons with intellectual disability may encounter difficulties in making choices and expressing preferences because of restricted communication skills or a tendency to acquiesce. In addition, many studies provide evidence that these persons have less opportunity to make choices and express their preferences. The aim of this study was to conduct a…

Sound Advice on Brand Names.

ERIC Educational Resources Information Center

Vanden Bergh, Bruce G.; And Others

A study was conducted to determine if brand names that begin with consonants called "plosives" (B, C, D, G, K, P, and T) are more readily recalled and recognized than names that begin with other consonants or vowels. Additionally, the study investigated the relationship between name length and memorability, ability to associate names…

Ionic Conductivity of TlBr1-xIx(x = 0, 0.2, 1): Candidate Gamma Ray Detector

NASA Astrophysics Data System (ADS)

Bishop, S. R.; Ciampi, G.; Lee, C. D.; Kuhn, M.; Tuller, H. L.; Higgins, W.; Shah, K. S.

2012-10-01

The ionic conductivity of TlBr, TlI and their solid solutions, candidates for high energy radiation detection, was examined using impedance spectroscopy. The orthorhombic to cubic phase change in TlI was observed via a steep change in conductivity with increasing temperature, whereas the TlBr-TlI solid solution was cubic throughout the measured temperature range, in agreement with the literature. The intrinsic conductivity of the cubic phase of each material showed nearly identical behavior, indicating that I substitution for Br has little to no effect on the combined defect formation and transport parameters in the studied range. Additionally, optical transmission was correlated with I concentration.

Study of the transport parameters of cloud lightning plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Z. S.; Yuan, P.; Zhao, N.

2010-11-15

Three spectra of cloud lightning have been acquired in Tibet (China) using a slitless grating spectrograph. The electrical conductivity, the electron thermal conductivity, and the electron thermal diffusivity of the cloud lightning, for the first time, are calculated by applying the transport theory of air plasma. In addition, we investigate the change behaviors of parameters (the temperature, the electron density, the electrical conductivity, the electron thermal conductivity, and the electron thermal diffusivity) in one of the cloud lightning channels. The result shows that these parameters decrease slightly along developing direction of the cloud lightning channel. Moreover, they represent similar suddenmore » change behavior in tortuous positions and the branch of the cloud lightning channel.« less

Economic Evaluation alongside Multinational Studies: A Systematic Review of Empirical Studies

PubMed Central

Oppong, Raymond; Jowett, Sue; Roberts, Tracy E.

2015-01-01

Purpose of the study This study seeks to explore methods for conducting economic evaluations alongside multinational trials by conducting a systematic review of the methods used in practice and the challenges that are typically faced by the researchers who conducted the economic evaluations. Methods A review was conducted for the period 2002 to 2012, with potentially relevant articles identified by searching the Medline, Embase and NHS EED databases. Studies were included if they were full economic evaluations conducted alongside a multinational trial. Results A total of 44 studies out of a possible 2667 met the inclusion criteria. Methods used for the analyses varied between studies, indicating a lack of consensus on how economic evaluation alongside multinational studies should be carried out. The most common challenge appeared to be related to addressing differences between countries, which potentially hinders the generalisability and transferability of results. Other challenges reported included inadequate sample sizes and choosing cost-effectiveness thresholds. Conclusions It is recommended that additional guidelines be developed to aid researchers in this area and that these be based on an understanding of the challenges associated with multinational trials and the strengths and limitations of alternative approaches. Guidelines should focus on ensuring that results will aid decision makers in their individual countries. PMID:26121465

Frontal P300 decrement and executive dysfunction in adolescents with conduct problems.

PubMed

Kim, M S; Kim, J J; Kwon, J S

2001-01-01

This study investigated the cognitive and cerebral function of adolescents with conduct problems by neuropsychological battery (STIM) and event-related potential (ERP). Eighteen adolescents with conduct disorder, and 18 age-matched normal subjects were included. Such cognitive functions as attention, memory, executive function and problem solving were evaluated using subtests of STIM. ERP was measured using an auditory oddball paradigm. The conduct group showed a significantly lower hit rate on the Wisconsin Card Sorting Test (WCST) than the control group. In addition, the conduct group showed reduced P300 amplitude at Fz and Cz, and prolonged P300 latency at Fz, and there was a significant correlation between P300 amplitude and Stroop test performance. These results indicate that adolescents with conduct problems have impairments of executive function and inhibition, and that these impairments are associated with frontal dysfunction.

Evaluation of electrical conductivity of Cu and Al through sub microsecond underwater electrical wire explosion

NASA Astrophysics Data System (ADS)

Sheftman, D.; Shafer, D.; Efimov, S.; Krasik, Ya. E.

2012-03-01

Sub-microsecond timescale underwater electrical wire explosions using Cu and Al materials have been conducted. Current and voltage waveforms and time-resolved streak images of the discharge channel, coupled to 1D magneto-hydrodynamic simulations, have been used to determine the electrical conductivity of the metals for the range of conditions between hot liquid metal and strongly coupled non-ideal plasma, in the temperature range of 10-60 KK. The results of these studies showed that the conductivity values obtained are typically lower than those corresponding to modern theoretical electrical conductivity models and provide a transition between the conductivity values obtained in microsecond time scale explosions and those obtained in nanosecond time scale wire explosions. In addition, the measured wire expansion shows good agreement with equation of state tables.

Determination of the Composition and Quantity of Phthalate Ester Additives in PVC Children's Toys. Greenpeace Research Laboratories Technical Note 06/97.

ERIC Educational Resources Information Center

Stringer, Ruth; Labounskaia, Irina; Santillo, David; Johnston, Paul; Siddorn, John; Stephenson, Angela

Polyvinyl chloride (vinyl or PVC) is widely used in toys and other children's products. This study, conducted by Greenpeace, examined the composition and quantity of phthalate ester additives in children's PVC toys, used to give the toys added flexibility. Drawn from 17 countries, a total of 71 toys designed to be chewed by babies and young…

The Impact of Prenatal Maternal Risk, Fearless Temperament and Early Parenting on Adolescent Callous-Unemotional Traits: A 14-Year Longitudinal Investigation

ERIC Educational Resources Information Center

Barker, Edward D.; Oliver, Bonamy R.; Viding, Essi; Salekin, Randall T.; Maughan, Barbara

2011-01-01

Objective: Proposals have been submitted to the DSM-V for the addition of a callous-unemotional (CU) specifier for conduct problem (CP) youth (CP/CU). While the addition of such a diagnostic category may aid in the identification of homogeneous CP subtypes, evidence on risks for the development of CP/CU remains limited. The present study sought to…

Conducting research and collaborating with researchers: the experience of clinicians in a residential treatment center.

PubMed

Adelman, Robert W; Castonguay, Louis G; Kraus, David R; Zack, Sanno E

2015-01-01

This paper describes the experience of clinicians in conducting research and collaborating with academic researchers. As part of clinical routine of a residential program for adolescent substance abusers, empirical data have been collected to assess client's needs before and after treatment, improve clinical practice, and identify barriers to change. Some of the challenges faced and the benefits learned in conducting these studies are presented. In addition to highlighting the convergence of research interests between clinicians and academicians, the conclusion offers general recommendations to foster these partnerships and solidify the scientific-practitioner model.

The ADVANCE Code of Conduct for collaborative vaccine studies.

PubMed

Kurz, Xavier; Bauchau, Vincent; Mahy, Patrick; Glismann, Steffen; van der Aa, Lieke Maria; Simondon, François

2017-04-04

Lessons learnt from the 2009 (H1N1) flu pandemic highlighted factors limiting the capacity to collect European data on vaccine exposure, safety and effectiveness, including lack of rapid access to available data sources or expertise, difficulties to establish efficient interactions between multiple parties, lack of confidence between private and public sectors, concerns about possible or actual conflicts of interest (or perceptions thereof) and inadequate funding mechanisms. The Innovative Medicines Initiative's Accelerated Development of VAccine benefit-risk Collaboration in Europe (ADVANCE) consortium was established to create an efficient and sustainable infrastructure for rapid and integrated monitoring of post-approval benefit-risk of vaccines, including a code of conduct and governance principles for collaborative studies. The development of the code of conduct was guided by three core and common values (best science, strengthening public health, transparency) and a review of existing guidance and relevant published articles. The ADVANCE Code of Conduct includes 45 recommendations in 10 topics (Scientific integrity, Scientific independence, Transparency, Conflicts of interest, Study protocol, Study report, Publication, Subject privacy, Sharing of study data, Research contract). Each topic includes a definition, a set of recommendations and a list of additional reading. The concept of the study team is introduced as a key component of the ADVANCE Code of Conduct with a core set of roles and responsibilities. It is hoped that adoption of the ADVANCE Code of Conduct by all partners involved in a study will facilitate and speed-up its initiation, design, conduct and reporting. Adoption of the ADVANCE Code of Conduct should be stated in the study protocol, study report and publications and journal editors are encouraged to use it as an indication that good principles of public health, science and transparency were followed throughout the study. Copyright © 2017. Published by Elsevier Ltd.

Program to develop sprayed, plastically deformable compressor shroud seal materials

NASA Technical Reports Server (NTRS)

Schell, J. D.; Schell, J. D.

1980-01-01

A study of fundamental rub behavior for 10 dense, sprayed materials and eight current compressor clearance materials was conducted. A literature survey of a wide variety of metallurgical and thermophysical properties was conducted and correlated to rub behavior. Based on the results, the most promising dense rub material was Cu-9A1. Additional studies on the effects of porosity, incursion rate, blade solidity, and ambient temperature were carried out on aluminum bronze (Cu-9Al-1Fe) with and without a 515B Feltmetal underlayer. A further development effort was conducted to assess the property requirements of a porous, aluminum bronze, seal material. Strength, thermal cycle capabilities, erosion and oxidation resistance, machinability, and abradability at several porosity levels were examined.

Automatic Parameterization Strategy for Cardiac Electrophysiology Simulations

PubMed Central

Costa, Caroline Mendonca; Hoetzl, Elena; Rocha, Bernardo Martins; Prassl, Anton J; Plank, Gernot

2014-01-01

Driven by recent advances in medical imaging, image segmentation and numerical techniques, computer models of ventricular electrophysiology account for increasingly finer levels of anatomical and biophysical detail. However, considering the large number of model parameters involved parameterization poses a major challenge. A minimum requirement in combined experimental and modeling studies is to achieve good agreement in activation and repolarization sequences between model and experiment or patient data. In this study, we propose basic techniques which aid in determining bidomain parameters to match activation sequences. An iterative parameterization algorithm is implemented which determines appropriate bulk conductivities which yield prescribed velocities. In addition, a method is proposed for splitting the computed bulk conductivities into individual bidomain conductivities by prescribing anisotropy ratios. PMID:24729986

Effect of bone conduction transducer placement on distortion product otoacoustic emissions

NASA Astrophysics Data System (ADS)

Hazelbaker, Julie L.

The purpose of this study was to develop a technique to determine the magnitude of bone conducted sound in the cochlea when stimuli are delivered from three different locations on the head. Distortion product otoacoustic emissions (DPOAE) at 1000 and 2000 Hz were used as tools to determine cochlear response to stimuli introduced via air conduction and bone conduction in three subjects. The bone conduction transducer was moved to three head locations (ipsilateral mastoid, contralateral mastoid and forehead). The intensity of the emissions elicited was compared. The differences in DPOAE magnitude created by varying the location of the bone conduction transducer were compared with behavioral threshold differences with the same transducers at the same locations. It was assumed that results of behavioral measures would provide a prediction of the relationship between air and bone conducted DPOAE. However, in the current study, this was not the case. Behavioral bone conduction threshold data did not predict differences in DPOAE at different bone conduction transducer locations. This was a somewhat surprising result and should be considered further in future studies examining the properties of DPOAE elicited by bone conduction. Additionally, a wide band noise masker was introduced to the non-test ear when bone conducted stimuli were introduced to make DPOAE and behavioral test conditions as similar as possible. No great suppression effects were noted across subjects for either frequency. This was likely due to the shape and intensity of the contralateral masked used.

Clear, Conductive, Transparent, Flexible Space Durable Composite Films for Electrostatic Charge Mitigation

NASA Technical Reports Server (NTRS)

Watson, Kent A.; Connell, John W.; Delozier, Donavon M.; Smith, Joseph G., Jr.

2004-01-01

Space environmentally durable polymeric films with low color and sufficient electrical conductivity to mitigate electrostatic charge (ESC) build-up have been under investigation as part of a materials development activity. These materials have potential applications on advanced spacecraft, particularly on large, deployable, ultra-light weight Gossamer spacecraft. The approach taken to impart sufficient electrical conductivity into the polymer film while maintaining flexibility is to use single wall carbon nanotubes (SWNTs) as conductive additives. Approaches investigated in our lab involved an in-situ polymerization method, addition of SWNTs to a polymer containing reactive end-groups, and spray coating of polymer surfaces. The work described herein is a summary of the current status of this project. Surface conductivities (measured as surface resistance) in the range sufficient for ESC mitigation were achieved with minimal effects on the physical, thermal, mechanical and optical properties of the films. Additionally, the electrical conductivity was not affected by harsh mechanical manipulation of the films. The chemistry and physical properties of these nanocomposites will be discussed.

Why scientists perform animal experiments, scientific or personal aim?

PubMed

Mayir, Burhan; Doğan, Uğur; Bilecik, Tuna; Yardımcı, Erdem Can; Çakır, Tuğrul; Aslaner, Arif; Mayir, Yeliz Akpınar; Oruç, Mehmet Tahir

2016-01-01

Although all animal studies are conducted in line with a specific purpose, we think that not all animal studies are performed for a scientific purpose but for personal curiosity or to fulfill a requirement. The aim of the present study is to reveal the purposes of experimental studies conducted on animals. We searched for experimental studies performed on rats in general surgery clinics via PubMed, and obtained the e-mail addresses of the corresponding authors for each study. Afterwards, we sent a 7-item questionnaire to the authors and awaited their responses. Seventy-three (22.2%) of 329 authors responded to the questionnaire. Within these studies, 31 (42.5%) were conducted as part of a dissertation, while the remaining 19 (26.0%) were conducted to meet the academic promotion criteria. Only 23 (31.5%) were conducted for scientific purposes. The cost of 41% of those studies was higher than 2500 $. As shown in this study, the main objective of carrying out animal studies in Turkey is usually to prepare a dissertation or to be entitled to academic promotion. Animal experiments must be planned and performed as scientific studies to support related clinical studies. Additionally, animal studies must have well-defined objectives and be carried out in line with scientific purposes that may lead to useful developments in medicine, rather than personal interests.

Orbital Transfer Vehicle (OTV) engine study. Phase A: Extension

NASA Technical Reports Server (NTRS)

Sobin, A. J.

1980-01-01

The current Phase A-Extension of the OTV engine study program aims to provide additional expander and staged combustion cycle data that will lead to design definition of the OTV engine. The proposed program effort seeks to optimize the expander cycle engine concept (consistent with identified OTV engine requirements), investigate the feasibility of kitting the staged combustion cycle engine to provide extended thrust operation, and conduct in-depth analysis of development risk, crew safety, and reliability for both cycles. Additional tasks address the costing of a 10/K thrust expander cycle engine and support of OTV systems study contractors.

Discriminant Characteristics of Non-attendees at Tompkins Cortland Community College.

ERIC Educational Resources Information Center

Ross, Robert O.

In 1990, a study was conducted at Tompkins Cortland Community College (TCCC) to determine if there was a significant difference in the personal characteristics of applicants for full-time study who actually attended and those who did not attend the college. In addition, the study sought to identify those variables that accounted for the largest…

Learning Method and Its Influence on Nutrition Study Results Throwing the Ball

ERIC Educational Resources Information Center

Samsudin; Nugraha, Bayu

2015-01-01

This study aimed to know the difference between playing and learning methods of exploratory learning methods to learning outcomes throwing the ball. In addition, this study also aimed to determine the effect of nutritional status of these two learning methods mentioned above. This research was conducted at SDN Cipinang Besar Selatan 16 Pagi East…

76 FR 39882 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... meeting is regarding the discussion of different innovative methodological approaches to the conduct of postmarket studies regarding silicone gel breast implants. Additionally, the panel will discuss key long-term...

Agricultural Commodity and Utility Carriers Hours of Service Exemption Analysis.

DOT National Transportation Integrated Search

2010-05-01

The study was conducted in two phases. Phase 1 compares the safety performance of agricultural and non-agricultural carriers for the period 2005 through 2008, and also examines two additional industries: livestock and utility carriers, whose operatio...

77 FR 4023 - Hewlett-Packard Company, Provisional Acceptance of a Settlement Agreement and Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

... December 2004 and July 2006, HP imported approximately 32,000 lithium-ion battery packs (the ``Products... April 2007, HP conducted a study, from which it obtained additional information about the Products. 9...

Simulation study on heat conduction of a nanoscale phase-change random access memory cell.

PubMed

Kim, Junho; Song, Ki-Bong

2006-11-01

We have investigated heat transfer characteristics of a nano-scale phase-change random access memory (PRAM) cell using finite element method (FEM) simulation. Our PRAM cell is based on ternary chalcogenide alloy, Ge2Sb2Te5 (GST), which is used as a recording layer. For contact area of 100 x 100 nm2, simulations of crystallization and amorphization processes were carried out. Physical quantities such as electric conductivity, thermal conductivity, and specific heat were treated as temperature-dependent parameters. Through many simulations, it is concluded that one can reduce set current by decreasing both electric conductivities of amorphous GST and crystalline GST, and in addition to these conditions by decreasing electric conductivity of molten GST one can also reduce reset current significantly.

Methods for conducting systematic reviews of risk factors in low- and middle-income countries.

PubMed

Shenderovich, Yulia; Eisner, Manuel; Mikton, Christopher; Gardner, Frances; Liu, Jianghong; Murray, Joseph

2016-03-15

Rates of youth violence are disproportionately high in many low- and middle-income countries [LMICs] but existing reviews of risk factors focus almost exclusively on high-income countries. Different search strategies, including non-English language searches, might be required to identify relevant evidence in LMICs. This paper discusses methodological issues in systematic reviews aiming to include evidence from LMICs, using the example of a recent review of risk factors for child conduct problems and youth violence in LMICs. We searched the main international databases, such as PsycINFO, Medline and EMBASE in English, as well as 12 regional databases in Arabic, Chinese, English, French, Spanish, Portuguese and Russian. In addition, we used internet search engines and Google Scholar, and contacted over 200 researchers and organizations to identify potentially eligible studies in LMICs. The majority of relevant studies were identified in the mainstream databases, but additional studies were also found through regional databases, such as CNKI, Wangfang, LILACS and SciELO. Overall, 85% of eligible studies were in English, and 15% were reported in Chinese, Spanish, Portuguese, Russian or French. Among eligible studies in languages other than English, two-thirds were identified only by regional databases and one-third was also indexed in the main international databases. There are many studies on child conduct problems and youth violence in LMICs which have not been included in prior reviews. Most research on these subjects in LMICs has been produced in the last two-three decades and mostly in middle-income countries, such as China, Brazil, Turkey, South Africa and Russia. Based on our findings, it appears that many studies of child conduct problems and youth violence in LMICs are reported in English, Chinese, Spanish and Portuguese, but few such studies are published in French, Arabic or Russian. If non-English language searches and screening had not been conducted in the current review, 15% of eligible studies would have been missed. Although there are benefits to non-English language searches and the inclusion of non-English studies in meta-analyses, systematic reviewers also need to consider the resources required to incorporate multi-lingual research.

Application of response surface methodology in optimization of lactic acid fermentation of radish: effect of addition of salt, additives and growth stimulators.

PubMed

Joshi, V K; Chauhan, Arjun; Devi, Sarita; Kumar, Vikas

2015-08-01

Lactic acid fermentation of radish was conducted using various additive and growth stimulators such as salt (2 %-3 %), lactose, MgSO4 + MnSO4 and Mustard (1 %, 1.5 % and 2 %) to optimize the process. Response surface methodology (Design expert, Trial version 8.0.5.2) was applied to the experimental data for the optimization of process variables in lactic acid fermentation of radish. Out of various treatments studied, only the treatments having ground mustard had an appreciable effect on lactic acid fermentation. Both linear and quadratic terms of the variables studied had a significant effect on the responses studied. The interactions between the variables were found to contribute to the response at a significant level. The best results were obtained in the treatment with 2.5 % salt, 1.5 % lactose, 1.5 % (MgSO4 + MnSO4) and 1.5 % mustard. These optimized concentrations increased titrable acidity and LAB count, but lowered pH. The second-order polynomial regression model determined that the highest titrable acidity (1.69), lowest pH (2.49) and maximum LAB count (10 × 10(8) cfu/ml) would be obtained at these concentrations of additives. Among 30 runs conducted, run 2 has got the optimum concentration of salt- 2.5 %, lactose- 1.5 %, MgSO4 + MnSO4- 1.5 % and mustard- 1.5 % for lactic acid fermentation of radish. The values for different additives and growth stimulators optimized in this study could successfully be employed for the lactic acid fermentation of radish as a postharvest reduction tool and for product development.

Influence of carbon conductive additives on electrochemical double-layer supercapacitor parameters

NASA Astrophysics Data System (ADS)

Kiseleva, E. A.; Zhurilova, M. A.; Kochanova, S. A.; Shkolnikov, E. J.; Tarasenko, A. B.; Zaitseva, O. V.; Uryupina, O. V.; Valyano, G. V.

2018-01-01

Electrochemical double-layer capacitors (EDLC) offer energy storage technology, highly demanded for rapid transition processes in transport and stationary applications, concerned with fast power fluctuations. Rough structure of activated carbon, widely used as electrode material because of its high specific area, leads to poor electrode conductivity. Therefore there is the need for conductive additive to decrease internal resistance and to achieve high specific power and high specific energy. Usually carbon blacks are widely used as conductive additive. In this paper electrodes with different conductive additives—two types of carbon blacks and single-walled carbon nanotubes—were prepared and characterized in organic electrolyte-based EDLC cells. Electrodes are based on original wood derived activated carbon produced by potassium hydroxide high-temperature activation at Joint Institute for High Temperatures RAS. Electrodes were prepared from slurry by cold-rolling. For electrode characterization cyclic voltammetry, impedance spectra analysis, equivalent series resistance measurements and galvanostatic charge-discharge were used.

Manufacture of a UO2-Based Nuclear Fuel with Improved Thermal Conductivity with the Addition of BeO

NASA Astrophysics Data System (ADS)

Garcia, Chad B.; Brito, Ryan A.; Ortega, Luis H.; Malone, James P.; McDeavitt, Sean M.

2017-12-01

The low thermal conductivity of oxide nuclear fuels is a performance-limiting parameter. Enhancing this property may provide a contribution toward establishing accident-tolerant fuel forms. In this study, the thermal conductivity of UO2 was increased through the fabrication of ceramic-ceramic composite forms with UO2 containing a continuous BeO matrix. Fuel with a higher thermal conductivity will have reduced thermal gradients and lower centerline temperatures in the fuel pin. Lower operational temperatures will reduce fission gas release and reduce fuel restructuring. Additions of BeO were made to UO2 fuel pellets in 2.5, 5, 7.5, and 10 vol pct concentrations with the goals of establishing reliable lab-scale processing procedures, minimizing porosity, and maximizing thermal conductivity. The microstructure was characterized with electron probe microanalysis, and the thermal properties were assessed by light flash analysis and differential scanning calorimetry. Reliable, high-density samples were prepared using compaction pressure between 200 and 225 MPa and sintering times between 4 and 6 hours. It was found that the thermal conductivity of UO2 improved approximately 10 pct for each 1 vol pct BeO added over the measured temperature range 298.15 K to 523.15 K (25 °C to 250 °C) with the maximum observed improvement being ˜ 100 pct, or doubled, at 10 vol pct BeO.

New Insights into the Compositional Dependence of Li-Ion Transport in Polymer-Ceramic Composite Electrolytes.

PubMed

Zheng, Jin; Hu, Yan-Yan

2018-01-31

Composite electrolytes are widely studied for their potential in realizing improved ionic conductivity and electrochemical stability. Understanding the complex mechanisms of ion transport within composites is critical for effectively designing high-performance solid electrolytes. This study examines the compositional dependence of the three determining factors for ionic conductivity, including ion mobility, ion transport pathways, and active ion concentration. The results show that with increase in the fraction of ceramic Li 7 La 3 Zr 2 O 12 (LLZO) phase in the LLZO-poly(ethylene oxide) composites, ion mobility decreases, ion transport pathways transit from polymer to ceramic routes, and the active ion concentration increases. These changes in ion mobility, transport pathways, and concentration collectively explain the observed trend of ionic conductivity in composite electrolytes. Liquid additives alter ion transport pathways and increase ion mobility, thus enhancing ionic conductivity significantly. It is also found that a higher content of LLZO leads to improved electrochemical stability of composite electrolytes. This study provides insight into the recurring observations of compositional dependence of ionic conductivity in current composite electrolytes and pinpoints the intrinsic limitations of composite electrolytes in achieving fast ion conduction.

Impact of the rate of the additive process of forming a heavy structure deforming in creep on the development of its technological stresses

NASA Astrophysics Data System (ADS)

Parshin, Dmitry A.

2018-05-01

The additive process of forming a semicircular arched structure by means of layer-by-layer addition of material to its inner surface is simulated. The impact of this process running mode on the development of the technological stresses fields in the structure being formed under the action of gravity under properties of the material creep and aging is examined. In the framework of the linear mechanics of accreted solids a mathematical model of the process under study is offered and numerical experiments are conducted. It is shown that the stress-strain state of the additively formed heavy objects decisively depends on their formation mode. Various practically important trends and features of this dependence are studied.

Behaviour of conductivity improvers in jet fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dacre, B.; Hetherington, J.I.

1995-05-01

Dangerous accumulation of electrostatic charge can occur due to high speed pumping and microfiltration of fuel. This can be avoided by increasing the electrical conductivity of the fuel using conductivity improver additives. However, marked variations occur in the conductivity response of different fuels when doped to the same level with conductivity improver. This has been attributed to interactions of the conductivity improver with other fuel additives or fuel contaminants. The present work concentrates on the effects of fuel contaminants, in particular polar compounds, on the performance of the conductivity improver. Conductivity is the fuel property of prime interest. The conductivitymore » response of model systems of the conductivity improver STADIS 450 in dodecane has been measured and the effect on this conductivity of additions of model polar contaminants sodium naphthenate, sodium dodecyl benzene sulphonate, and sodium phenate have been measured. The sodium salts have been found to have a complex effect on the performance of STADIS 450, reducing the conductivity at low concentrations to a minimum value and then increasing the conductivity at high concentrations of sodium salts. This work has focused on characterising this minimum in the conductivity values and on understanding the reason for its occurrence. The effects on the minimum conductivity value of the following parameters are investigated: (a) time, (b) STADIS 450 concentration, (c) sodium salt concentration, (d) mixed sodium salts, (e) experimental method, (f) a phenol, (g) individual components of STADIS 450. The complex conductivity response of the STADIS 450 to sodium salt impurities is discussed in terms of possible inter-molecular interactions.« less

Technology needs for high-speed rotorcraft

NASA Technical Reports Server (NTRS)

Rutherford, John; Orourke, Matthew; Martin, Christopher; Lovenguth, Marc; Mitchell, Clark

1991-01-01

A study to determine the technology development required for high-speed rotorcraft development was conducted. The study begins with an initial assessment of six concepts capable of flight at, or greater than 450 knots with helicopter-like hover efficiency (disk loading less than 50 pfs). These concepts were sized and evaluated based on measures of effectiveness and operational considerations. Additionally, an initial assessment of the impact of technology advances on the vehicles attributes was made. From these initial concepts a tilt wing and rotor/wing concepts were selected for further evaluation. A more detailed examination of conversion and technology trade studies were conducted on these two vehicles, each sized for a different mission.

Studies on the thermal behavior of CS:LiTFSI:[Amim] Cl polymer electrolytes exerted by different [Amim] Cl content

NASA Astrophysics Data System (ADS)

Ramesh, S.; Shanti, R.; Morris, Ezra

2012-01-01

The principle motivation of this research work is to develop environmental-friendly polymer electrolytes utilizing corn starch (CS), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and 1-allyl-3-methylimidazolium chloride ([Amim] Cl) by solution casting technique. The highest ionic conductivity value was achieved for the composition CS:LiTFSI:[Amim] Cl (14 wt. %:6 wt. %:80 wt. %) which exhibits the ionic conductivity value of 5.68 × 10 -2 S cm -1 at 40 °C with the activation energy of 4.86 kJ mol -1. This sample possess high concentration of amorphous phase coupled with greater presence of conducting cations (lithium, Li + and imidazolium, [Amim] +) as depicted by the dielectric loss tangent plot. The conductivity-temperature plots were found to obey Arrhenius rule in which the conductivity mechanism is thermally assisted. The melting temperature of polymer electrolyte decreases with increase in [Amim] Cl content. This is attributed to the good miscibility of [Amim] Cl in CS:LiTFSI matrix inducing structural disorderliness. Reference to the TGA results it is found that the addition of [Amim] Cl diminishes the heat-resistivity whereas enhancement in the thermal stability occurred at the initial addition and declines with further doping of [Amim] Cl.

Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing.

PubMed

Smith, C J; Tammas-Williams, S; Hernandez-Nava, E; Todd, I

2017-09-05

Metallic powder bed additive manufacturing is capable of producing complex, functional parts by repeatedly depositing thin layers of powder particles atop of each other whilst selectively melting the corresponding part cross-section into each layer. A weakness with this approach arises when melting overhanging features, which have no prior melted material directly beneath them. This is due to the lower thermal conductivity of the powder relative to solid material, which as a result leads to an accumulation of heat and thus distortion. The Electron Beam Melting (EBM) process alleviates this to some extent as the powder must first be sintered (by the beam itself) before it is melted, which results in the added benefit of increasing the thermal conductivity. This study thus sought to investigate to what extent the thermal conductivity of local regions in a titanium Ti-6Al-4V powder bed could be varied by imparting more energy from the beam. Thermal diffusivity and density measurements were taken of the resulting sintered samples, which ranged from being loosely to very well consolidated. It was found that the calculated thermal conductivity at two temperatures, 40 and 730 °C, was more than doubled over the range of input energies explored.

Conducting Research as a Visiting Scientist in a Women’s Prison

PubMed Central

Byrne, Mary Woods

2006-01-01

Incarcerated populations have disparities in health risks and illness conditions meriting study, but the history of prison research is marred by unethical conduct. Ethical participation strategies are discussed in the context of studies implemented by the author in a state prison system. This study used ethnographic approaches, observed adherence to federal and institutional review board regulations and corrections department directives, and maintained continuous communication with vested interests to provide entry and long-term access for studies on female prisoners and their civilian infants. A culture clash between the punitive restrictive environment that serves the custody–control–care mission of corrections systems and the open inquiry environment needed for conduct of health research exists. Federal regulations protect prisoners as human subjects but additional vigilance and communication by researchers are required. Gaining and maintaining access to prison inmates for nursing research are leadership challenges that can be met within the caring and collaborative paradigm of nursing. PMID:16061169

Data on Mercury in Water, Bed Sediment, and Fish from Streams Across the United States, 1998-2005

USGS Publications Warehouse

Bauch, Nancy J.; Chasar, Lia C.; Scudder, Barbara C.; Moran, Patrick W.; Hitt, Kerie J.; Brigham, Mark E.; Lutz, Michelle A.; Wentz, Dennis A.

2009-01-01

The U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) and Toxic Substances Hydrology Programs conducted the National Mercury Pilot Study in 1998 to examine relations of mercury (Hg) in water, bed sediment and fish in streams across the United States, including Alaska and Hawaii. Water and bed-sediment samples were analyzed for total Hg (THg), methylmercury (MeHg), and other constituents; fish were analyzed for THg. Similar sampling was conducted at additional streams across the country in 2002 and 2004-05. This report summarizes sample collection and processing protocols, analytical methods, environmental data, and quality-assurance data for stream water, bed sediment, and fish for these national studies. To extend the geographic coverage of the data, this report also includes four regional USGS Hg studies conducted during 1998-2001 and 2004. The environmental data for these national and regional Hg studies are provided in an electronic format.

Electrical conductivity studies in (Ag3AsS3)x(As2S3)1-x superionic glasses and composites

NASA Astrophysics Data System (ADS)

Studenyak, I. P.; Neimet, Yu. Yu.; Kranjčec, M.; Solomon, A. M.; Orliukas, A. F.; Kežionis, A.; Kazakevičius, E.; Šalkus, T.

2014-01-01

Compositional, frequency, and temperature studies of impedance and electrical conductivity in (Ag3AsS3)x(As2S3)1-x superionic glasses and composites were performed. Frequency range from 10 Hz to 3 × 109 Hz and temperature interval 300-400 K were used for the measurements. Compositional dependences of electrical conductivity and activation energy are analyzed; the most substantial changes are observed with the transition from (Ag3AsS3)0.4(As2S3)0.6 glass to (Ag3AsS3)0.5(As2S3)0.5 composite. With increase of Ag3AsS3 content, the investigated materials are found to have crystalline inclusions and show the two-phase composite nature. Addition of Ag3AsS3 leads to the increase of electrical conductivity whereas the activation energy decreases.

Mitigating driver distraction with retrospective and concurrent feedback.

PubMed

Donmez, Birsen; Boyle, Linda Ng; Lee, John D

2008-03-01

An experiment was conducted to assess the effects of retrospective and combined retrospective and concurrent feedback on driver performance and engagement in distracting activities. A previous study conducted by the authors showed that concurrent (or real time) feedback can help drivers better modulate their distracting activities. However, research also shows that concurrent feedback can pose additional distractions due to the limited time and resources available during driving. Retrospective feedback, which is presented at the end of a trip (i.e., post-drive), can include additional information on safety critical situations during a trip and help the driver learn safe driving habits. A driving simulator study was conducted with 48 participants and 3 conditions: retrospective feedback, combined feedback (both retrospective and concurrent), and no feedback (baseline case). The feedback conditions (retrospective and combined) resulted in faster response to lead vehicle braking events as depicted by shorter accelerator release times. Moreover, combined feedback also resulted in longer glances to the road. The results suggest that both feedback types have potential to improve immediate driving performance and driver engagement in distractions. Combined feedback holds the most promise for mitigating the effects of distraction from in-vehicle information systems.

The impact of accident attention, ideology, and environmentalism on American attitudes toward nuclear energy.

PubMed

Besley, John C; Oh, Sang-Hwa

2014-05-01

This study involves the analysis of three waves of survey data about nuclear energy using a probability-based online panel of respondents in the United States. Survey waves included an initial baseline survey conducted in early 2010, a follow-up survey conducted in 2010 following the Deepwater Horizon oil spill in the Gulf of Mexico, and an additional follow-up conducted just after the 2011 Fukushima, Japan, nuclear accident. The central goal is to assess the degree to which changes in public views following an accident are contingent on individual attention and respondent predispositions. Such results would provide real-world evidence of motivated reasoning. The primary analysis focuses on the impact of Fukushima and how the impact of individual attention to energy issues is moderated by both environmental views and political ideology over time. The analysis uses both mean comparisons and multivariate statistics to test key relationships. Additional variables common in the study of emerging technologies are included in the analysis, including demographics, risk and benefit perceptions, and views about the fairness of decisionmakers in both government and the private sector. © 2013 Society for Risk Analysis.

Quantitative Studies in Planetary Volcanism

NASA Technical Reports Server (NTRS)

Baloga, Stephen M.

2004-01-01

Proxemy Research has a research grant to perform scientific investigations of volcanism and volcanic-related process on other planets. Part of this research involves mathematical modeling of specific volcanic transport processes and the use of terrestrial analogs. This report contains a summary of activities conducted over the time period indicated. In addition, a synopsis of science research conducted during the period is given. A complete listing of publications and scientific abstracts that were presented at scientific conferences is contained in the report.

Extra Sinus Pathologies on the Routine CT Sinus Study: What the Radiologist Cannot Afford to Miss

DTIC Science & Technology

2017-04-30

assistance. 8. The 59 CRD/Publications and Presentations Section will route the request form to clinical investigations. 502 ISG/JAC ( Ethics Review) and...additional information. 11 . The Joint Ethics Regulation (JER) DoO 5500.07 -R. Standards of Conduct, provides standards of ethical conduct for all DoD...includes a legal ethics review to address any potential conmcts related to DoD personnel participating in non-OoD sponsored conferences

Prospective study of the effects of ventilation tubes on hearing after radiotherapy for carcinoma of nasopharynx

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhury, C.R.; Ho, J.H.; Wright, A.

1988-03-01

In patients with nasopharyngeal carcinoma, deafness sometimes occurs following radiotherapy. It is usually conductive, but may be sensorineural. Tinnitus is present frequently and usually is distressing. The role of ventilation tubes (grommets) in relieving these problems was assessed in a prospective randomized controlled trial of 115 patients. In the group with grommets, there was an improvement in hearing, with a reduction of the averaged air-bone gap (p less than .01). This was not found in the control group without ventilation tubes, who developed a larger conductive loss (p less than .01) and, in addition, a slight deterioration of the averagedmore » bone conduction threshold (p less than .01). Surprisingly, the group with grommets did not develop this sensorineural loss (p less than .01). In addition, tinnitus was improved significantly by the insertion of ventilation tubes (p less than .01). Neither necrosis nor stenosis of the external auditory meatus was found in either group.« less

Prospective study of the effects of ventilation tubes on hearing after radiotherapy for carcinoma of nasopharynx

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhury, C.R.; Ho, J.H.; Wright, A.

In patients with nasopharyngeal carcinoma, deafness sometimes occurs following radiotherapy. It is usually conductive, but may be sensorineural. Tinnitus is present frequently and usually is distressing. The role of ventilation tubes (grommets) in relieving these problems was assessed in a prospective randomized controlled trial of 115 patients. In the group with grommets, there was an improvement in hearing, with a reduction of the averaged air-bone gap (p less than .01). This was not found in the control group without ventilation tubes, who developed a larger conductive loss (p less than .01) and, in addition, a slight deterioration of the averagedmore » bone conduction threshold (p less than .01). Surprisingly, the group with grommets did not develop this sensorineural loss (p less than .01). In addition, tinnitus was improved significantly by the insertion of ventilation tubes (p less than .01). Neither necrosis nor stenosis of the external auditory meatus was found in either group.« less

Tribological properties of coal slurries

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.; Schrubens, Dale L.

1987-01-01

A pin-on-disk tribometer was used to study the tribological properties of methyl alcohol-coal slurries. Friction coefficients, steel pin wear rates and wear surface morphological studies were conducted on AISI 440C HT and M-50 bearing steels which were slid dry and in solutions of methyl alcohol, methyl alcohol-fine coal particles, and methyl alcohol-fine coal particles-flocking additive. The latter was an oil derived from coal and originally intended to be added to the coal slurry to improve the sedimentation and rheology properties. The results of this study indicated that the addition of the flocking additive to the coal slurry markedly improved the tribological properties, especially wear. In addition, the type of steel was found to be very important in determining the type of wear that took place. Cracks and pits were found on the M-50 steel pin wear surfaces that slid in the coal slurries while 440C HT steel pins showed none.

Additional Interventions to Enhance the Effectiveness of Individual Placement and Support: A Rapid Evidence Assessment

PubMed Central

Boycott, Naomi; Schneider, Justine; McMurran, Mary

2012-01-01

Topic. Additional interventions used to enhance the effectiveness of individual placement and support (IPS). Aim. To establish whether additional interventions improve the vocational outcomes of IPS alone for people with severe mental illness. Method. A rapid evidence assessment of the literature was conducted for studies where behavioural or psychological interventions have been used to supplement standard IPS. Published and unpublished empirical studies of IPS with additional interventions were considered for inclusion. Conclusions. Six published studies were found which compared IPS alone to IPS plus a supplementary intervention. Of these, three used skills training and three used cognitive remediation. The contribution of each discrete intervention is difficult to establish. Some evidence suggests that work-related social skills and cognitive training are effective adjuncts, but this is an area where large RCTs are required to yield conclusive evidence. PMID:22685665

Social Capital and Health: A Review of Prospective Multilevel Studies

PubMed Central

Murayama, Hiroshi; Fujiwara, Yoshinori; Kawachi, Ichiro

2012-01-01

Background This article presents an overview of the concept of social capital, reviews prospective multilevel analytic studies of the association between social capital and health, and discusses intervention strategies that enhance social capital. Methods We conducted a systematic search of published peer-reviewed literature on the PubMed database and categorized studies according to health outcome. Results We identified 13 articles that satisfied the inclusion criteria for the review. In general, both individual social capital and area/workplace social capital had positive effects on health outcomes, regardless of study design, setting, follow-up period, or type of health outcome. Prospective studies that used a multilevel approach were mainly conducted in Western countries. Although we identified some cross-sectional multilevel studies that were conducted in Asian countries, including Japan, no prospective studies have been conducted in Asia. Conclusions Prospective evidence from multilevel analytic studies of the effect of social capital on health is very limited at present. If epidemiologic findings on the association between social capital and health are to be put to practical use, we must gather additional evidence and explore the feasibility of interventions that build social capital as a means of promoting health. PMID:22447212

Social capital and health: a review of prospective multilevel studies.

PubMed

Murayama, Hiroshi; Fujiwara, Yoshinori; Kawachi, Ichiro

2012-01-01

This article presents an overview of the concept of social capital, reviews prospective multilevel analytic studies of the association between social capital and health, and discusses intervention strategies that enhance social capital. We conducted a systematic search of published peer-reviewed literature on the PubMed database and categorized studies according to health outcome. We identified 13 articles that satisfied the inclusion criteria for the review. In general, both individual social capital and area/workplace social capital had positive effects on health outcomes, regardless of study design, setting, follow-up period, or type of health outcome. Prospective studies that used a multilevel approach were mainly conducted in Western countries. Although we identified some cross-sectional multilevel studies that were conducted in Asian countries, including Japan, no prospective studies have been conducted in Asia. Prospective evidence from multilevel analytic studies of the effect of social capital on health is very limited at present. If epidemiologic findings on the association between social capital and health are to be put to practical use, we must gather additional evidence and explore the feasibility of interventions that build social capital as a means of promoting health.

An Icelandic Version of McMasters Family Assessment Device (FAD)

ERIC Educational Resources Information Center

Juliusdottir, Gudlaug M.; Olafsdottir, Hrefna

2015-01-01

Purpose: An analysis of the psychometric properties of an Icelandic version of McMasters Family Assessment Device (FAD) was conducted in this study. Method: Two groups, clinical and nonclinical, comprising of 529 parents answered the FAD. The study examined the internal reliability and discriminant validity of the instrument in addition to…

Use of FGD gypsum on a bermudagrass pasture in the Appalachian Plateau Region

USDA-ARS?s Scientific Manuscript database

Addition of industrial by-products from coal fired power plants (FGD gypsum and FGD gypsum + fly ash) are thought to increase plant production. Thus, a study was conducted to evaluate the effects of industrial by-products as a soil amendment on bermudagrass (Cynodon dactylon L.) yield. The study was...

How Kindergarten Readiness Affects the Future Academic Achievement of Students

ERIC Educational Resources Information Center

Ensey Hover, Ashlee B.

2014-01-01

This research study was conducted to examine the effects of the Kindergarten Readiness program in a large suburban school district in Tennessee as measured by third grade Reading and Mathematics TCAP Achievement Test scores. In addition, the study examined the relationships between the chronological ages of the students at kindergarten entry and…

European Teachers' Technological Pedagogical Content Knowledge (TPCK) and Educational Use of Web Technologies

ERIC Educational Resources Information Center

Baris, Mehmet Fatih

2015-01-01

Several studies have been conducted on technological, pedagogical content knowledge and web-based education. In this study, the Technological Pedagogical Content Knowledge and Educational Use of Web Technologies (TPCK-W) were analyzed in addition to the self-efficacy and attitudes of 33 teachers from eight different branches carrying out their…

Aquacultural Occupational Task Analysis.

ERIC Educational Resources Information Center

Dung, Elaine; Wakui, Lawrence S.

A study was conducted by the Office of the Chancellor for Community Colleges in Hawaii to assess the vocational skills required of workers in the aquaculture industry and to determine if these skills should be reflected in the community college curriculum. In addition to a review of relevant literature, the study involved field observations at 17…

Perfectionism in Gifted Adolescents: A Replication and Extension

ERIC Educational Resources Information Center

Margot, Kelly C.; Rinn, Anne N.

2016-01-01

To provide further generalizability for the results garnered by two previous studies, the authors conducted a methodological replication. In addition to adding to the body of replication research done with gifted students, the purpose of this study was to examine perfectionism differences among gifted adolescents in regards to gender, birth order,…

Perception of the Effect of Leadership Styles on Organizational Commitment at Tribal Colleges and Universities

ERIC Educational Resources Information Center

Mathern, Amber M.

2016-01-01

This study was conducted to determine if a relationship exists between the perceived leadership style of supervisors and the organizational commitment level of the subordinate employees within Tribal Colleges and Universities (TCUs). Additionally, the study examined whether a difference exists in the organizational commitment levels of TCU…

Latino Parent Perspectives: How to Promote and Implement Additive Bilingualism

ERIC Educational Resources Information Center

Enstice, Emily M.

2017-01-01

There is limited research that investigates parent perspectives with respect to their early elementary school children's home language use. The findings reported in this article are part of a dissertation study on parent perceptions of bilingualism conducted in Northern California. To fill the gap in research, this study investigates how first…

The Impact of Self-Regulatory Skills Training for Reducing in School Suspension Placement: A Case Study

ERIC Educational Resources Information Center

Schilling-Dickey, Gwen

2013-01-01

Researchers have been looking for solutions to disciplinary problems within the school setting. Many studies have been conducted to assess the impact of a variety of intervention strategies with research indicating that strategies involving self-regulatory control of behavioral responses can benefit students. Additionally, positive behavioral…

Salary Equity Studies: The State of the Art. ASHE Annual Meeting 1982 Paper.

ERIC Educational Resources Information Center

Hengstler, Dennis D.; And Others

The strengths and weaknesses of various methodologies in conducting salary equity studies are examined. Particular attention is paid to the problems of identifying appropriate matches in the paired-comparison approach and to the sample, predictor and decision-rule problems associated with the regression analysis approach. In addition, highlights…

Academic and Social Achievement Goals: Their Additive, Interactive, and Specialized Effects on School Functioning

ERIC Educational Resources Information Center

Liem, Gregory Arief D.

2016-01-01

Background: Students' pursuit of academic and social goals has implications for school functioning. However, studies on academic and social achievement goals have been relatively independent and mainly conducted with students in culturally Western settings. Aims: Guided by multiple-goal perspectives, this study examined the role of academic and…

The Effect of Peer Tutoring on Interaction Behaviors in Inclusive Physical Education

ERIC Educational Resources Information Center

Klavina, Aija; Block, Martin E.

2008-01-01

This study assessed the effect of peer tutoring on physical, instructional, and social interaction behaviors between elementary school age students with severe and multiple disabilities (SMD) and peers without disabilities. Additional measures addressed the activity time of students with SMD. The study was conducted in inclusive general physical…

The Effects of Background Information on Standarized Test Scores.

ERIC Educational Resources Information Center

Feeley, Joan T.; Wepner, Shelley B.

A study was conducted to determine the effects of exposure to the topics included on the comprehension subtest of the Nelson-Denny Reading Test (ND), Form F, on college freshmen's performance on the test. In addition, the study investigated whether those students with background information would indicate their awareness of this knowledge on a…

Eating Disorder Diagnostic Scale: Additional Evidence of Reliability and Validity

ERIC Educational Resources Information Center

Stice, Eric; Fisher, Melissa; Martinez, Erin

2004-01-01

The authors conducted 4 studies investigating the reliability and validity of the Eating Disorder Diagnostic Scale (HDDS; E. Stice, C. F. Telch, & S. L. Rizvi, 2000), a brief self-report measure for diagnosing anorexia nervosa, bulimia nervosa, and binge eating disorder. Study 1 found that the HDDS showed criterion validity with interview-based…

Cross-system comparisons elucidate disturbance complexities and generalities

Treesearch

Debra P.C. Peters; Ariel E. Lugo; F. Stuart Chapin; Steward T.A. Pickett; Michael Duniway; Adrian V. Rocha; Frederick J. Swanson; Christine Laney; Julia Jones

2011-01-01

Given that ecological effects of disturbance have been extensively studied in many ecosystems, it is surprising that few quantitative syntheses across diverse ecosystems have been conducted. Multi-system studies tend to be qualitative because they focus on disturbance types that are difficult to measure in an ecologically relevant way. In addition, synthesis of...

Politics, Economics and Identity: Mapping the Linguistic Landscape of Kuala Lumpur, Malaysia

ERIC Educational Resources Information Center

Manan, Syed Abdul; David, Maya Khemlani; Dumanig, Francisco Perlas; Naqeebullah, Khan

2015-01-01

This study explores the linguistic landscape of Kuala Lumpur, Malaysia. Using photographs as a source of data, the study collects samples from both government and private signage from five selected neighbourhoods of the city. In addition to photographs, interviews with business owners have been conducted and used for triangulation purposes. The…

E-Textbooks and Students' Learning Experiences

ERIC Educational Resources Information Center

Sun, Jun; Flores, Javier; Tanguma, Jesus

2012-01-01

The contribution of the e-textbooks can be enormous considering their additional supporting features, but adoption has not crystallized yet. This study examines the relevant experiences of college students in terms of how the use of e-textbooks may enhance their learning. A survey study was conducted to measure the perceptions of each student on…

Teacher Perceptions and Benefits of Student-Led Conferencing in Southern and Central Illinois Elementary Schools

ERIC Educational Resources Information Center

West, Kelly L.

2017-01-01

Student-led conferences are an alternative method of reporting progress to parents. This qualitative phenomenological research study was conducted in order to examine elementary teachers' perceptions of student-led conferences in comparison to traditional parent-teacher conferences in Central and Southern Illinois. Additionally, the study examined…

The Effectiveness of Robotics as a Manipulative in Mathematics Instruction: A Mixed Method Study

ERIC Educational Resources Information Center

Sheehy, Leonard

2017-01-01

Addition of fractions is an important foundation for students to experience success in mathematics. This mixed-methods study was conducted to measure the effectiveness of robotics as a mathematics manipulative with seventh grade students. Two groups of students were established: control and treatment. The control group received teacher-centered…

Evaluation of restorative maintenance on 1975 and 1976 light-duty vehicles in Washington, DC. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washington, L.H.

1977-03-01

A comprehensive study was conducted of automobile exhaust emissions and the effects of restorative maintenance and selective engine parameter maladjustment on these emissions. This was a study of 100, 1975 and 1976 model year consumer owned vehicles from the Washington, D.C. area and was an addition to a total surveillance program which had been conducted in seven major cities (Denver, Washington, D.C., Los Angeles, Houston, Phoenix, Chicago and St. Louis) in order to determine the impact of automobile emissions on air quality. This additional study was not made in all seven of the cities involved in the original study. Specifically,more » vehicles from the Washington, D.C. area were tested for fuel economy and the content of total hydrocarbons, carbon monoxide, carbon dioxide and nitrogen oxides in their exhaust emissions using the 1975 Federal Test Procedure, the Highway Fuel Economy Test, the Federal Short Cycle, the New York-New Jersey Acid Test, the Clayton Key Mode Test, the Two Speed Idle Test, and the Federal Three Mode Test. (Portions of this document are not fully legible)« less

An Examination of the Developmental Propensity Model of Conduct Problems

PubMed Central

Rhee, Soo Hyun; Friedman, Naomi P.; Corley, Robin P.; Hewitt, John K.; Hink, Laura K.; Johnson, Daniel P.; Watts, Ashley K. Smith; Young, Susan E.; Robinson, JoAnn; Waldman, Irwin D.; Zahn-Waxler, Carolyn

2015-01-01

The present study tested specific hypotheses advanced by the developmental propensity model of the etiology of conduct problems in the Colorado Longitudinal Twin Study, a prospective, longitudinal, genetically informative sample. High negative emotionality, low behavioral inhibition, low concern and high disregard for others, and low cognitive ability assessed during toddlerhood (age 14 to 36 months) were examined as predictors of conduct problems in later childhood and adolescence (age 4 to 17 years). Each hypothesized antisocial propensity dimension predicted conduct problems, but some predictions may be context specific or due to method covariance. The most robust predictors were observed disregard for others (i.e., responding to others’ distress with active, negative responses such as anger and hostility), general cognitive ability, and language ability, which were associated with conduct problems reported by parents, teachers, and adolescents, and change in observed negative emotionality (i.e., frustration tolerance), which was associated with conduct problems reported by teachers and adolescents. Furthermore, associations between the most robust early predictors and later conduct problems were influenced by the shared environment rather than genes. We conclude that shared environmental influences that promote disregard for others and detract from cognitive and language development during toddlerhood also predispose individuals to conduct problems in later childhood and adolescence. The identification of those shared environmental influences common to early antisocial propensity and later conduct problems is an important future direction, and additional developmental behavior genetic studies examining the interaction between children’s characteristics and socializing influences on conduct problems are needed. PMID:26653135

TiO2-Nanofillers Effects on Some Properties of Highly- Impact Resin Using Different Processing Techniques.

PubMed

Aziz, Hawraa Khalid

2018-01-01

The criteria of conventional curing of polymethyl methacrylate do not match the standard properties of the denture base materials. This research was conducted to investigate the addition of TiO 2 nano practical on impact strength, thermal conductivity and color stability of acrylic resin cured by microwave in comparison to the conventional cured of heat-polymerized acrylic resin. 120 specimens made of high impact acrylic resin were divided into two main groups according to the type of curing (water bath, microwave), then each group was subdivided into two groups according to the addition of 3% TiO 2 nano-fillers and control group (without the addition of TiO 2 0%). Each group was subdivided according to the type of test into 3 groups with 10 specimens for each group. Data were statistically analyzed using Student t-test to detect the significant differences between tested and control groups at significance level ( P <0.05). According to curing type methods, the results showed that there was a significant decrease in impact strength of microwaved cured resin, but there was no significant difference in the thermal conductivity and color stability of resin. In addition, by using nanofiller, there was a significant increase in the impact strength and color stability with the addition of 3% TiO 2 nanofillers, but no significant difference was found in the thermal conductivity of the acrylic resin. The microwave curing of acrylic resin had no change in the color stability and thermal conductivity in comparison to the water bath, but the impact strength was decreased. The addition of 3% TiO 2 improved the impact and the color stability, but the thermal conductivity did not change.

Leadership and Management Education and Training (LMET) Effectiveness: A Pilot Study for Evaluation.

DTIC Science & Technology

1981-06-01

under examination. In addition, the necessity to conduct an efficient yet thorough evaluation further compounds the decision maker’s dilemma . One...addition, each school developed its own curriculum and style resulting in wide differences between schools as to what was actually being presented . 22...James L. Holloway, III, and top Navy leaders found themselves in a dilemma . A comprehensive review and examination of existing leadership and manage

The effects of workplace psychosocial factors on whether Japanese dual-earner couples with preschool children have additional children: a prospective study.

PubMed

Eguchi, Hisashi; Shimazu, Akihito; Fujiwara, Takeo; Iwata, Noboru; Shimada, Kyoko; Takahashi, Masaya; Tokita, Masahito; Watai, Izumi; Kawakami, Norito

2016-12-07

This study explored the effect of workplace psychosocial factors (job demand, job control, and workplace social support) on dual-earner couples in Japan having additional children, using a prospective study design. We conducted a 2-year prospective cohort study with 103 dual-earner couples with preschool children in Japan, as part of the Tokyo Work-Family Interface Study II. We used multivariable logistic regression analyses to evaluate the prospective association of job strain (categorized into low-strain job, active job, passive job, and strain job groups) and workplace social support (high and low) with couples having additional children during the follow-up period, adjusting for age, for men and women separately. Men in the active job group (i.e., with high job demands and high job control) had a significantly higher odds ratio (OR) of having additional children during the follow-up period, after controlling for age (OR 9.07, 95% confidence interval: 1.27-64.85). No significant association between any workplace psychosocial factor and having additional children was confirmed among women. Having an active job may have a positive influence on having additional children among men in dual-earner couples.

Examining the proportion of dietary phosphorus from plants, animals and food additives excreted in urine

PubMed Central

St-Jules, David E; Jagannathan, Ram; Gutekunst, Lisa; Kalantar-Zadeh, Kamyar; Sevick, Mary Ann

2016-01-01

Phosphorus bioavailability is an emerging topic of interest in the field of renal nutrition that has important research and clinical implications. Estimates of phosphorus bioavailability, based on digestibility, indicate that bioavailability of phosphorus increases from plants to animals to food additives. In this commentary, we examined the proportion of dietary phosphorus from plants, animals and food additives excreted in urine from four controlled feeding studies conducted in healthy adults and patients with chronic kidney disease. As expected, a smaller proportion of phosphorus from plant foods was excreted in urine compared to animal foods. However, contrary to expectations, phosphorus from food additives appeared to be incompletely absorbed. The apparent discrepancy between digestibility of phosphorus additives and the proportion excreted in urine suggests a need for human balance studies to determine the bioavailability of different sources of phosphorus. PMID:27810171

Examining the Proportion of Dietary Phosphorus From Plants, Animals, and Food Additives Excreted in Urine.

PubMed

St-Jules, David E; Jagannathan, Ram; Gutekunst, Lisa; Kalantar-Zadeh, Kamyar; Sevick, Mary Ann

2017-03-01

Phosphorus bioavailability is an emerging topic of interest in the field of renal nutrition that has important research and clinical implications. Estimates of phosphorus bioavailability, based on digestibility, indicate that bioavailability of phosphorus increases from plants to animals to food additives. In this commentary, we examined the proportion of dietary phosphorus from plants, animals, and food additives excreted in urine from four controlled-feeding studies conducted in healthy adults and patients with chronic kidney disease. As expected, a smaller proportion of phosphorus from plant foods was excreted in urine compared to animal foods. However, contrary to expectations, phosphorus from food additives appeared to be incompletely absorbed. The apparent discrepancy between digestibility of phosphorus additives and the proportion excreted in urine suggests a need for human balance studies to determine the bioavailability of different sources of phosphorus. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Advanced vehicle concepts systems and design analysis studies

NASA Technical Reports Server (NTRS)

Waters, Mark H.; Huynh, Loc C.

1994-01-01

The work conducted by the ELORET Institute under this Cooperative Agreement includes the modeling of hypersonic propulsion systems and the evaluation of hypersonic vehicles in general and most recently hypersonic waverider vehicles. This work in hypersonics was applied to the design of a two-stage to orbit launch vehicle which was included in the NASA Access to Space Project. Additional research regarded the Oblique All-Wing (OAW) Project at NASA ARC and included detailed configuration studies of OAW transport aircraft. Finally, work on the modeling of subsonic and supersonic turbofan engines was conducted under this research program.

Conductive polymer sensor arrays for smart orthopaedic implants

NASA Astrophysics Data System (ADS)

Micolini, Carolina; Holness, F. B.; Johnson, James A.; Price, Aaron D.

2017-04-01

This study proposes and demonstrates the design, implementation, and characterization of a 3D-printed smartpolymer sensor array using conductive polyaniline (PANI) structures embedded in a polymeric substrate. The piezoresistive characteristics of PANI were studied to evaluate the efficacy of the manufacturing of an embedded pressure sensor. PANI's stability throughout loading and unloading cycles together with the response to incremental loading cycles was investigated. It is demonstrated that this specially developed multi-material additive manufacturing process for polyaniline is a good candidate for the manufacture of implant components with smart-polymer sensors embedded for the analysis of joint loads in orthopaedic implants.

Cystic Fibrosis Transmembrane Conductance Regulator (ABCC7) Structure

PubMed Central

Hunt, John F.; Wang, Chi; Ford, Robert C.

2013-01-01

Structural studies of the cystic fibrosis transmembrane conductance regulator (CFTR) are reviewed. Like many membrane proteins, full-length CFTR has proven to be difficult to express and purify, hence much of the structural data available is for the more tractable, independently expressed soluble domains. Therefore, this chapter covers structural data for individual CFTR domains in addition to the sparser data available for the full-length protein. To set the context for these studies, we will start by reviewing structural information on model proteins from the ATP-binding cassette (ABC) transporter superfamily, to which CFTR belongs. PMID:23378596

Alternating steady state free precession for estimation of current-induced magnetic flux density: A feasibility study.

PubMed

Lee, Hyunyeol; Jeong, Woo Chul; Kim, Hyung Joong; Woo, Eung Je; Park, Jaeseok

2016-05-01

To develop a novel, current-controlled alternating steady-state free precession (SSFP)-based conductivity imaging method and corresponding MR signal models to estimate current-induced magnetic flux density (Bz ) and conductivity distribution. In the proposed method, an SSFP pulse sequence, which is in sync with alternating current pulses, produces dual oscillating steady states while yielding nonlinear relation between signal phase and Bz . A ratiometric signal model between the states was analytically derived using the Bloch equation, wherein Bz was estimated by solving a nonlinear inverse problem for conductivity estimation. A theoretical analysis on the signal-to-noise ratio of Bz was given. Numerical and experimental studies were performed using SSFP-FID and SSFP-ECHO with current pulses positioned either before or after signal encoding to investigate the feasibility of the proposed method in conductivity estimation. Given all SSFP variants herein, SSFP-FID with alternating current pulses applied before signal encoding exhibits the highest Bz signal-to-noise ratio and conductivity contrast. Additionally, compared with conventional conductivity imaging, the proposed method benefits from rapid SSFP acquisition without apparent loss of conductivity contrast. We successfully demonstrated the feasibility of the proposed method in estimating current-induced Bz and conductivity distribution. It can be a promising, rapid imaging strategy for quantitative conductivity imaging. © 2015 Wiley Periodicals, Inc.

Study on the reutilization of clear fracturing flowback fluids in surfactant flooding with additives for Enhanced Oil Recovery (EOR).

PubMed

Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

2014-01-01

An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10(-3) mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical.

Study on the Reutilization of Clear Fracturing Flowback Fluids in Surfactant Flooding with Additives for Enhanced Oil Recovery (EOR)

PubMed Central

Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

2014-01-01

An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10−3 mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical. PMID:25409507

The effect of different surfactants/plastisizers on the electrical behavior of CNT nano-modified cement mortars

NASA Astrophysics Data System (ADS)

Dalla, P. T.; Alafogianni, P.; Tragazikis, I. K.; Exarchos, D. A.; Dassios, K.; Barkoula, N.-M.; Matikas, T. E.

2015-03-01

Cement-based materials have in general low electrical conductivity. Electrical conductivity is the measure of the ability of the material to resist the passage of electrical current. The addition of a conductive admixture such as Multi-Walled Carbon Nanotubes (MWCNTs) in a cement-based material increases the conductivity of the structure. This research aims to characterize nano-modified cement mortars with MWCNT reinforcements. Such nano-composites would possess smartness and multi-functionality. Multifunctional properties include electrical, thermal and piezo-electric characteristics. One of these properties, the electrical conductivity, was measured using a custom made apparatus that allows application of known D.C. voltage on the nano-composite. In this study, the influence of different surfactants/plasticizers on CNT nano-modified cement mortar specimens with various concentrations of CNTs (0.2% wt. cement CNTs - 0.8% wt. cement CNTs) on the electrical conductivity is assessed.

37 CFR 1.484 - Conduct of international preliminary examination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... be permitted a personal or telephone interview with the examiner, which may be requested after the... opinion and the establishment of the international preliminary examination report. Additional interviews may be conducted where the examiner determines that such additional interviews may be helpful to...

Effect of Surfactant Type and Sonication Energy on the Electrical Conductivity Properties of Nanocellulose-CNT Nanocomposite Films.

PubMed

Siljander, Sanna; Keinänen, Pasi; Räty, Anna; Ramakrishnan, Karthik Ram; Tuukkanen, Sampo; Kunnari, Vesa; Harlin, Ali; Vuorinen, Jyrki; Kanerva, Mikko

2018-06-20

We present a detailed study on the influence of sonication energy and surfactant type on the electrical conductivity of nanocellulose-carbon nanotube (NFC-CNT) nanocomposite films. The study was made using a minimum amount of processing steps, chemicals and materials, to optimize the conductivity properties of free-standing flexible nanocomposite films. In general, the NFC-CNT film preparation process is sensitive concerning the dispersing phase of CNTs into a solution with NFC. In our study, we used sonication to carry out the dispersing phase of processing in the presence of surfactant. In the final phase, the films were prepared from the dispersion using centrifugal cast molding. The solid films were analyzed regarding their electrical conductivity using a four-probe measuring technique. We also characterized how conductivity properties were enhanced when surfactant was removed from nanocomposite films; to our knowledge this has not been reported previously. The results of our study indicated that the optimization of the surfactant type clearly affected the formation of freestanding films. The effect of sonication energy was significant in terms of conductivity. Using a relatively low 16 wt. % concentration of multiwall carbon nanotubes we achieved the highest conductivity value of 8.4 S/cm for nanocellulose-CNT films ever published in the current literature. This was achieved by optimizing the surfactant type and sonication energy per dry mass. Additionally, to further increase the conductivity, we defined a preparation step to remove the used surfactant from the final nanocomposite structure.

Plant hydraulic responses to long-term dry season nitrogen deposition alter drought tolerance in a Mediterranean-type ecosystem.

PubMed

Pivovaroff, Alexandria L; Santiago, Louis S; Vourlitis, George L; Grantz, David A; Allen, Michael F

2016-07-01

Anthropogenic nitrogen (N) deposition represents a significant N input for many terrestrial ecosystems. N deposition can affect plants on scales ranging from photosynthesis to community composition, yet few studies have investigated how changes in N availability affect plant water relations. We tested the effects of N addition on plant water relations, hydraulic traits, functional traits, gas exchange, and leaf chemistry in a semi-arid ecosystem in Southern California using long-term experimental plots fertilized with N for over a decade. The dominant species were Artemisia california and Salvia mellifera at Santa Margarita Ecological Reserve and Adenostoma fasciculatum and Ceanothus greggii at Sky Oaks Field Station. All species, except Ceanothus, showed increased leaf N concentration, decreased foliar carbon to N ratio, and increased foliar N isotopic composition with fertilization, indicating that added N was taken up by study species, yet each species had a differing physiological response to long-term N addition. Dry season predawn water potentials were less negative with N addition for all species except Adenostoma, but there were no differences in midday water potentials, or wet season water potentials. Artemisia was particularly responsive, as N addition increased stem hydraulic conductivity, stomatal conductance, and leaf carbon isotopic composition, and decreased wood density. The alteration of water relations and drought resistance parameters with N addition in Artemisia, as well as Adenostoma, Ceanothus, and Salvia, indicate that N deposition can affect the ability of native Southern California shrubs to respond to drought.

Switching of the electrical conductivity of plasticized PVC films under uniaxial pressure

NASA Astrophysics Data System (ADS)

Vlasov, D. V.; Apresyan, L. A.; Vlasova, T. V.; Kryshtob, V. I.

2011-11-01

The jumplike switching of the electrical conductivity in wide-band-gap polymer (antistatic plasticized polyvinylchloride) films under uniaxial pressure is studied. In various plasticized PVC materials, the uniaxial pressure inducing a conductivity jump by four orders of magnitude or higher changes from several to several hundreds of bars, and this effect is retained at a film thickness of several hundred microns, which is two orders of magnitude larger than the critical film thicknesses known for other wide-band-gap polymers. In addition to the earlier interpretation of the conductivity anomalies in plasticized PVC, we proposed a phenomenological electron-molecular dynamic nanotrap model, in which local charge transfer is provided by mobile molecule segments in a plasticized polymer.

Mindfulness based cognitive therapy versus treatment as usual in adults with attention deficit hyperactivity disorder (ADHD).

PubMed

Janssen, Lotte; Kan, Cornelis C; Carpentier, Pieter J; Sizoo, Bram; Hepark, Sevket; Grutters, Janneke; Donders, Rogier; Buitelaar, Jan K; Speckens, Anne E M

2015-09-15

Adults with attention deficit hyperactivity disorder (ADHD) often present with a lifelong pattern of core symptoms that is associated with impairments of functioning in daily life. This has a substantial personal and economic impact. In clinical practice there is a high need for additional or alternative interventions for existing treatments, usually consisting of pharmacotherapy and/or psycho-education. Although previous studies show preliminary evidence for the effectiveness of mindfulness-based interventions in reducing ADHD symptoms and improving executive functioning, these studies have methodological limitations. This study will take account of these limitations and will examine the effectiveness of Mindfulness Based Cognitive Therapy (MBCT) in further detail. A multi-centre, parallel-group, randomised controlled trial will be conducted in N = 120 adults with ADHD. Patients will be randomised to MBCT in addition to treatment as usual (TAU) or TAU alone. Assessments will take place at baseline and at three, six and nine months after baseline. Primary outcome measure will be severity of ADHD symptoms rated by a blinded clinician. Secondary outcome measures will be self-reported ADHD symptoms, executive functioning, mindfulness skills, self-compassion, positive mental health and general functioning. In addition, a cost-effectiveness analysis will be conducted. This trial will offer valuable information about the clinical and cost-effectiveness of MBCT in addition to TAU compared to TAU alone in adults swith ADHD. ClinicalTrials.gov NCT02463396. Registered 8 June 2015.

Composition and conductance distributions of single GeSi quantum rings studied by conductive atomic force microscopy combined with selective chemical etching.

PubMed

Lv, Y; Cui, J; Jiang, Z M; Yang, X J

2013-02-15

Atomic force microscopy imaging combined with selective chemical etching is employed to quantitatively investigate three-dimensional (3D) composition distributions of single GeSi quantum rings (QRs). In addition, the 3D quantitative composition distributions and the corresponding conductance distributions are simultaneously obtained on the same single GeSi QRs by conductive atomic force microscopy combined with selective chemical etching, allowing us to investigate the correlations between the conductance and composition distributions of single QRs. The results show that the QRs' central holes have higher Ge content, but exhibit lower conductance, indicating that the QRs' conductance distribution is not consistent with their composition distribution. By comparing the topography, composition and conductance profiles of the same single QRs before and after different etching processes, it is found that the conductance distributions of GeSi QRs do not vary with the change of composition distribution. Instead, the QRs' conductance distributions are found to be consistent with their topographic shapes, which can be supposed to be due to the shape determined electronic structures.

Scaling relation of the anomalous Hall effect in (Ga,Mn)As

NASA Astrophysics Data System (ADS)

Glunk, M.; Daeubler, J.; Schoch, W.; Sauer, R.; Limmer, W.

2009-09-01

We present magnetotransport studies performed on an extended set of (Ga,Mn)As samples at 4.2 K with longitudinal conductivities σxx ranging from the low-conductivity to the high-conductivity regime. The anomalous Hall conductivity σxy(AH) is extracted from the measured longitudinal and Hall resistivities. A transition from σxy(AH)=20Ω-1cm-1 due to the Berry phase effect in the high-conductivity regime to a scaling relation σxy(AH)∝σxx1.6 for low-conductivity samples is observed. This scaling relation is consistent with a recently developed unified theory of the anomalous Hall effect in the framework of the Keldysh formalism. It turns out to be independent of crystallographic orientation, growth conditions, Mn concentration, and strain, and can therefore be considered universal for low-conductivity (Ga,Mn)As. The relation plays a crucial role when deriving values of the hole concentration from magnetotransport measurements in low-conductivity (Ga,Mn)As. In addition, the hole diffusion constants for the high-conductivity samples are determined from the measured longitudinal conductivities.

Three-dimensional transformation optics for arbitrary coordinate systems: transforming conductive materials and boundaries.

PubMed

Kazemzadeh, Mohammad-Rahim; Alighanbari, Abbas

2018-04-16

A three-dimensional transformation optics method, leading to homogeneous materials, applicable to any non-Cartesian coordinate systems or waveguides/objects of arbitrary cross-sections is presented. Both the conductive boundary and internal material of the desired device is determined by the proposed formulation. The method is applicable to a wide range of waveguide, radiation, and cloaking problems, and is demonstrated for circular waveguide couplers and an external cloak. An advantage of the present method is that the material properties are simplified by appropriately selecting the conductive boundaries. For instance, a right-angle circular waveguide bend is presented which uses only one homogenous material. Also, transformation of conductive materials and boundaries are studied. The conditions in which the transformed boundaries remain conductive are discussed. In addition, it is demonstrated that negative infinite conductivity can be replaced with positive conductivity, without affecting the field outside the conductive boundary. It is also observed that a negative finite conductivity can be replaced with a positive one, by accepting some small errors. The general mathematical procedure and formulation for calculating the parametric surface equations of the conductive peripheries are presented.

Electrical properties of carbon nanotubes modified GaSe glassy system

NASA Astrophysics Data System (ADS)

Khan, Hana; Khan, Zubair M. S. H.; Islam, Shama; Rahman, Raja Saifu; Husain, M.; Zulfequar, M.

2018-05-01

In this paper we report the investigation of the effect of Carbon Nanotubes (CNT) addition on the electrical properties of GaSe Glassy system. Dielectric constant and dielectric loss of GaSe glassy system are found to increase on CNT addition. The conductivity of GaSe glasy systems is also found to increase on CNT addition. This behavior is attributed to the excellent conduction properties of Carbon Nanotube.

Perceptions and Positionings of Colleges in New York City: A Longitudinal Study of Brand Images

ERIC Educational Resources Information Center

Clark, Sylvia D.

2005-01-01

A study of high school seniors' perceptions of colleges, conducted in 1979, was replicated 23 years later. The study affords an opportunity to examine perceptual changes over time and provides an additional perspective on the positioning of colleges, apart from other well-known surveys. This information may be useful for those involved in…

Exploring Saudi Pre-Service Teachers' Knowledge of Critical Thinking Skills and Their Teaching Perceptions

ERIC Educational Resources Information Center

Gashan, Amani K.

2015-01-01

The current study aimed to investigate Saudi pre-service teachers' knowledge about the general concepts of critical thinking, as well as its skills. In addition, the study explored their perceptions about critical thinking and its teaching in classrooms with an aim to develop learning and teaching process. The study was conducted with twenty-nine…

75 FR 7467 - Gary E. Hall and Rita C. Hall; Notice of Application Accepted for Filing With the Commision...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... Intervene and Protests, Ready for Environmental Analysis, Intent To Waive Solicitation of Additional Study... study should be conducted in order to form a factual basis for complete analysis of the application on its merits, the resource agency, Indian tribe, or person must file a request for the study with the...

ac conductivity in Gd doped Pb(Zr0.53Ti0.47)O3 ceramics

NASA Astrophysics Data System (ADS)

Portelles, J.; Almodovar, N. S.; Fuentes, J.; Raymond, O.; Heiras, J.; Siqueiros, J. M.

2008-10-01

This study is focused in the conduction processes taking place in 0.6 wt % Gd doped lead zirconate titanate samples PbZr0.53Ti0.47O3:Gd (PZT53/47:Gd) in the vicinity of the morphotropic phase boundary. Doped samples show very large dielectric permittivity with respect to that of undoped ones near the transition temperature. The frequency dependent ac conductivity of PZT53/47:Gd ceramics was studied in the 30-450 °C temperature range. X-ray diffraction analyses indicate the incorporation of Gd atoms to the structure. The changes in the dielectric properties as functions of temperature of the doped samples are taken as additional evidence of the incorporation of Gd into the crystal structure. Gd acts as donor center promoting extrinsic n-type conduction. The ac conductivity behavior obeys Jonscher universal relation in the 100 Hz-1 MHz frequency range for temperatures between 30 and 300 °C. The measured conductivity values for Gd doped PZT53/47 are higher than those of pure PZT53/47. According to the correlated barrier hopping model, the preponderant conduction mechanism in the frequency-temperature response was recognized as small polarons hopping mechanism.

Shopper marketing nutrition interventions: Social norms on grocery carts increase produce spending without increasing shopper budgets.

PubMed

Payne, Collin R; Niculescu, Mihai; Just, David R; Kelly, Michael P

2015-01-01

We assessed the efficacy of an easy-to-implement shopper marketing nutrition intervention in a pilot and two additional studies to increase produce demand without decreasing store profitability or increasing shopper budgets. We created grocery cart placards that detailed the number of produce items purchased (i.e., descriptive norm) at particular stores (i.e., provincial norm). The effect of these placards on produce spending was assessed across 971,706 individual person grocery store transactions aggregated by day. The pilot study designated a baseline period (in both control and intervention store) followed by installation of grocery cart placards (in the intervention store) for two weeks. The pilot study was conducted in Texas in 2012. In two additional stores, we designated baseline periods followed by 28 days of the same grocery cart placard intervention as in the pilot. Additional interventions were conducted in New Mexico in 2013. The pilot study resulted in a significant difference between average produce spending per day per person across treatment periods (i.e., intervention versus same time period in control) (16%) and the difference between average produce spending per day per person across stores in the control periods (4%); Furthermore, the same intervention in two additional stores resulted in significant produce spending increases of 12.4% and 7.5% per day per person respectively. In all stores, total spending did not change. Descriptive and provincial social norm messages (i.e., on grocery cart placards) may be an overlooked tool to increase produce demand without decreasing store profitability and increasing shopper budgets.

Shopper marketing nutrition interventions: Social norms on grocery carts increase produce spending without increasing shopper budgets☆

PubMed Central

Payne, Collin R.; Niculescu, Mihai; Just, David R.; Kelly, Michael P.

2015-01-01

Objectives We assessed the efficacy of an easy-to-implement shopper marketing nutrition intervention in a pilot and two additional studies to increase produce demand without decreasing store profitability or increasing shopper budgets. Methods We created grocery cart placards that detailed the number of produce items purchased (i.e., descriptive norm) at particular stores (i.e., provincial norm). The effect of these placards on produce spending was assessed across 971,706 individual person grocery store transactions aggregated by day. The pilot study designated a baseline period (in both control and intervention store) followed by installation of grocery cart placards (in the intervention store) for two weeks. The pilot study was conducted in Texas in 2012. In two additional stores, we designated baseline periods followed by 28 days of the same grocery cart placard intervention as in the pilot. Additional interventions were conducted in New Mexico in 2013. Results The pilot study resulted in a significant difference between average produce spending per day per person across treatment periods (i.e., intervention versus same time period in control) (16%) and the difference between average produce spending per day per person across stores in the control periods (4%); Furthermore, the same intervention in two additional stores resulted in significant produce spending increases of 12.4% and 7.5% per day per person respectively. In all stores, total spending did not change. Conclusions Descriptive and provincial social norm messages (i.e., on grocery cart placards) may be an overlooked tool to increase produce demand without decreasing store profitability and increasing shopper budgets. PMID:26844084

CNT/conductive polymer composites for low-voltage driven EAP actuators

NASA Astrophysics Data System (ADS)

Sugino, Takushi; Shibata, Yoshiyuki; Kiyohara, Kenji; Asaka, Kinji

2012-04-01

We investigated the effects of additives incorporated into the electrode layer in order to improve the actuation performance of dry-type carbon nanotube (CNT) actuators. Especially, the addition of conductive nano-particles such as polyaniline (PANI) and polypyrrole (PPy) improves actuation performance very much rather than the addition of nonconductive nano-particles such as mesoprous silica (MCM-41 type). In this paper, we studied on the influences of applied voltage, species of ionic liquid (IL), amounts of IL, thickness of actuator to optimize actuation performance. Imidazolium type ionic liquids with three different anions, that is, 1-ethyl-3-methylimidazolium (EMI) as a cation and tetrafluoroborate (BF4), trifluoromethanesulfonate (OTf), and bis(trifluoromethanesulfonyl)imide (TFSI) as anions were chosen in this study. EMIBF4 is the most suitable IL for our CNT actuator including PANI in the electrode layer. We tuned the amount of IL and the thickness of actuator. As a result, the strain was improved to be 2.2% at 0.1 Hz by applying the voltage of 2.5 V. This improved value is almost 2 times larger than our previous results. We also show the potential of improved CNT actuators for a thin and light Braille display.

Russia in the Arctic

DTIC Science & Technology

2011-07-01

strategy with emphasis on geostrate- gic analysis. The mission of SSI is to use independent analysis to conduct strategic studies that develop policy...De- fense, and the larger national security community. In addition to its studies , SSI publishes special reports on topics of special or immediate... on the SSI website. The SSI website address is: www.StrategicStudiesInstitute.army.mil. ***** The Strategic Studies Institute publishes a monthly e

Sleep and Performance Research Center

DTIC Science & Technology

2012-05-01

upon the placement of the work period with respect to the circadian rhythm. Additional studies were published by SPRC care factually during the...Research Center (SPRC) conducts human and animal studies in laboratory and field settings in support of basic and applied sleep research at Washington...Program of Research Field Studies in Humans In a field study of serving police officers, Charles, et al. (2011) found that perceived shorter

Study of Polyurethane Foaming Dynamics Using a Heat Flow Meter

NASA Astrophysics Data System (ADS)

Koniorczyk, P.; Trzyna, M.; Zmywaczyk, J.; Zygmunt, B.; Preiskorn, M.

2017-05-01

This work presents the results of the study concerning the effects of fillers addition on the heat flux density \\dot{q}( t ) of foaming of polyurethane-polystyrene porous composite (PSUR) and describes the dynamics of this process during the first 600 s. This foaming process resulted in obtaining porous materials that were based on HFC 365/225 blown rigid polyurethane foam (PUR) matrix, which contained thermoplastic expandable polystyrene (EPS) beads as the filler. In PSUR composites, the EPS beads were expanded after being heated to a temperature above the glass transition temperature of EPS and vaporing gas incorporated inside, by using the heat of exothermic reaction of polyol with isocyanate. From the start (t=0) to the end of the PSUR composite foaming process (t=tk), \\dot{q}( t ) was measured with the use of the heat flow meter. For the purpose of the study two PUR systems were selected: one with high and one with low heat density of foaming process q. EPS beads were selected from the same manufacturer with large and small diameter. The mass fraction of EPS in PSUR foam varied during the measurements. Additionally, a study of volume fractions of expanded EPS phase in PSUR foams as a function of mass fractions of EPS was conducted. In order to verify effects of the EPS addition on the heat flux density during PSUR foaming process, the thermal conductivity measurements were taken.

Carbon doped PDMS: conductance stability over time and implications for additive manufacturing of stretchable electronics

NASA Astrophysics Data System (ADS)

Tavakoli, Mahmoud; Rocha, Rui; Osorio, Luis; Almeida, Miguel; de Almeida, Anibal; Ramachandran, Vivek; Tabatabai, Arya; Lu, Tong; Majidi, Carmel

2017-03-01

Carbon doped PDMS (cPDMS), has been used as a conductive polymer for stretchable electronics. Compared to liquid metals, cPDMS is low cost and is easier to process or to print with an additive manufacturing process. However, changes on the conductance of the carbon based conductive PDMS (cPDMS) were observed over time, in particular after integration of cPDMS and the insulating polymer. In this article we investigate the process parameters that lead to improved stability over conductance of the cPDMS over time. Slight modifications to the fabrication process parameters were conducted and changes on the conductance of the samples for each method were monitored. Results suggested that change of the conductance happens mostly after integration of a pre-polymer over a cured cPDMS, and not after integration of the cPDMS over a cured insulating polymer. We show that such changes can be eliminated by adjusting the integration priority between the conductive and insulating polymers, by selecting the right curing temperature, changing the concentration of the carbon particles and the thickness of the conductive traces, and when possible by changing the insulating polymer material. In this way, we obtained important conclusions regarding the effect of these parameters on the change of the conductance over time, that should be considered for additive manufacturing of soft electronics. Also, we show that these changes can be possibly due to the diffusion from PDMS into cPDMS.

Accuracy testing of electric groundwater-level measurement tapes

USGS Publications Warehouse

Jelinski, Jim; Clayton, Christopher S.; Fulford, Janice M.

2015-01-01

The accuracy tests demonstrated that none of the electric-tape models tested consistently met the suggested USGS accuracy of ±0.01 ft. The test data show that the tape models in the study should give a water-level measurement that is accurate to roughly ±0.05 ft per 100 ft without additional calibration. To meet USGS accuracy guidelines, the electric-tape models tested will need to be individually calibrated. Specific conductance also plays a part in tape accuracy. The probes will not work in water with specific conductance values near zero, and the accuracy of one probe was unreliable in very high conductivity water (10,000 microsiemens per centimeter).

Toxic Hazards Research Unit

NASA Technical Reports Server (NTRS)

Macewen, J. D.; Vernot, E. H.

1971-01-01

The activities of the Toxic Hazards Research Unit (THRU) for the period of June 1970 through May 1971 reviewed. Modification of the animal exposure facilities primarily for improved human safety but also for experimental integrity and continuity are discussed. Acute toxicity experiments were conducted on hydrogen fluoride (HF), hydrogen chloride (HCl), nitrogen dioxide (NO2), and hydrogen cyanide (HCN) both singly and in combination with carbon dioxide (CO). Additional acute toxicity experiments were conducted on oxygen difluoride (OF2) and chlorine pentafluoride (ClF5). Subacute toxicity studies were conducted on methylisobutylketone and dichloromethane (methylene dichloride). The interim results of further chronic toxicity experiments on monomethylhydrazine (MMH) are also described.

Property influence of polyanilines on photovoltaic behaviors of dye-sensitized solar cells.

PubMed

Tan, Shuxin; Zhai, Jin; Xue, Bofei; Wan, Meixiang; Meng, Qingbo; Li, Yuliang; Jiang, Lei; Zhu, Daoben

2004-03-30

The influence of polyanilines (PANIs) as hole conductors on the photovoltaic behaviors of dye-sensitized solar cells is studied. The current-voltage (I-V) characteristics and the incident photon to current conversion efficiency (IPCE) curves of the devices are determined as the function of different conductivities and morphologies of PANIs. The results show that the conductivity of PANIs affects the performance of the devices greatly, and PANI with the intermediate conductivity value (3.5 S/cm) is optimum. In addition, the effects of both the film formation property and the cluster size of polyanilines on the photovoltaic behaviors of the devices are also discussed.

Foam concrete of increased strength with the thermomodified peat additives

NASA Astrophysics Data System (ADS)

Kudyakov, A. I.; Kopanitsa, N. O.; Sarkisov, Ju S.; Kasatkina, A. V.; Prischepa, I. A.

2015-01-01

The paper presents the results of research of foam concrete with thermomodified peat additives. The aim of the research was to study the effect of modifying additives on cement stone and foam concrete properties. Peat additives are prepared by heat treatment of peat at 600 °C. Two approaches of obtaining additives are examined: in condition of open air access (TMT-600) and in condition of limited air access (TMT-600-k). Compressive strength of a cement stone with modifiers found to be increased by 28.9 - 65.2%. Introducing peat modifiers into foam concrete mix leads to increase of compressive strength by 44-57% at 28- day age and heat conductivity of foam concrete decreases by 0.089 W/(m·°C).

Stratton Sagebrush Hydrology Study Area: An annotated bibliography of research conducted 1968-1990

USGS Publications Warehouse

Burgess, Leah M.; Schoenecker, Kathryn A.

2004-01-01

This annotated bibliography provides an overview of research projects conducted on the Stratton Sagebrush Hydrology Study Area (Stratton) since its designation as such in 1967. Sources include the Rocky Mountain Forest and Range Experiment Station records storage room, Laramie, Wyoming, the USGS and USFS online reference libraries, and scientific journal databases at the University of Wyoming and Colorado State University. This annotated bibliography summarizes publications from research conducted at Stratton during the prime of its tenure as a research lab from 1968 to 1990. In addition, an appendix is included that catalogues all data on file at the Rocky Mountain Forest and Range Experiment Station in Laramie, Wyoming. Each file folder was searched and its contents recorded here for the researcher seeking original data sets, charts, photographs and records.

New Aptes Cross-linked Polymers from Poly(ethylene oxide)s and Cyanuric Chloride for Lithium Batteries

NASA Technical Reports Server (NTRS)

Tigelaar, Dean M.; Meador, Mary Ann B.; Kinder, James D.; Bennett, William R.

2005-01-01

A new series of polymer electrolytes for use as membranes for lithium batteries are described. Electrolytes were made by polymerization between cyanuric chloride and diamino-terminated poly(ethylene oxide)s, followed by cross-linking via a sol-gel process. Thermal analysis and lithium conductivity of freestanding polymer films were studied. The effects of several variables on conductivity were investigated, such as length of backbone PEO chain, length of branching PEO chain, extent of branching, extent of cross-linking, salt content, and salt counterion. Polymer films with the highest percentage of PEO were found to be the most conductive, with a maximum lithium conductivity of 3.9 x 10(exp -5) S/cm at 25 C. Addition of plasticizer to the dry polymers increased conductivity by an order of magnitude.

A general population twin study of conduct problems and the auditory P300 waveform.

PubMed

Bertoletti, Eleonora; Michelini, Giorgia; Moruzzi, Sara; Ferrer, Giuseppina; Ferini-Strambi, Luigi; Stazi, Maria Antonietta; Ogliari, Anna; Battaglia, Marco

2014-01-01

Reduced amplitude of the P300 event-related potential has been consistently associated with a variety of externalising problems, including conduct disorder. The few available genetically-informative studies of these relationships, however, were conducted among adolescents/adults (i.e., at an age when conduct disorder has typically already become manifest). Among 200 general population twins with a mean age of 9 years (range 6-14 years), we studied the relationship between the P300 waveform elicited by an auditory oddball task and the DSM-oriented conduct problems scale of the Child Behavior Checklist 6-18. Conduct problems scores were negatively and significantly correlated (r = -0.19, p = 0.01) with P300 amplitude; correlations between P300 amplitude and the other DSM-oriented Child Behavior Checklist scales were non-significant, except for oppositional defiant problems (p = 0.01). We found moderate heritability estimates for both P300 amplitude (0.58, CI:0.37;0.73) and conduct problems (0.52, CI:0.25;0.70). Bivariate twin analyses indicated that the covariation between these two phenotypes can be explained by additive genetic factors only, with a genetic correlation of -0.33. An association between reduced P300 amplitude and conduct problems can be substantiated already in childhood, at an age that precedes the most typical onset of conduct disorder. This relationship appears to be genetic in nature. Reduced P300 amplitude can represent a valuable marker for conduct problems, and can contribute to the early identification of children at high-risk for conduct disorder.

Performance of gravel aggregates in superpave mixes with 100/95 angularity.

DOT National Transportation Integrated Search

2010-04-01

The research conducted in this study evaluated the asphalt mixture performance of various gravel and : crushed stone sources consisting of different levels of crushed face counts, as determined by ASTM D5821. : Along with ASTM D5821, two additional a...

Final report : model deployment of a regional, multi-modal 511 traveler information system

DOT National Transportation Integrated Search

1999-02-01

A survey was designed and conducted, to extend prior work discussed in the Driver Fatigue and Alertness Study literature review, by collecting additional data about commercial motor vehicle (CMV) drivers and their job characteristics. It also sought ...

Analysis and Treatment of Waters from Hydraulically Fractured Oil and Gas Wells

EPA Pesticide Factsheets

Our research is largely focused on analyzing the chemical and microbiological components of the waters. In addition, we are conducting studies to biodegrade the organicpollutants within flowback and produced waters to develop the potential for inexpensive bioremediation technologies.

An evaluation of the moisture susceptibility of warm mix asphalt mixtures.

DOT National Transportation Integrated Search

2010-05-01

This paper describes the results of a laboratory study conducted to evaluate the influence of Aspha-min and Sasobit : additives on the behaviour of warm asphalt mixtures. Specimens were compacted at two temperatures, 100 and 1458C, and : were sub...

COLUMN STUDIES ON BTEX BIODEGRADATION UNDER MICROAEROPHILIC AND DENITRIFYING CONDITIONS

EPA Science Inventory

Two column tests were conducted using aquifer material to simulate the nitrate field demonstration project carried out earlier at Traverse City, Michigan. The objectives were to better define the effect nitrate addition had on biodegradation of benzene, toluene, ethylbenzene, xyl...

CHARACTERIZING THE DISPERSIVE STATE OF CONVECTIVE BOUNDARY LAYERS FOR APPLIED DISPERSION MODELING

EPA Science Inventory

Estimates from semiempirical models that characterize surface heat flux, mixing depth, and profiles of temperature, wind, and turbulence are compared with observations from atmospheric field Studies conducted in Colorado, Illinois, Indiana, and Minnesota. In addition, for wind an...

Operations Praetorian, Phalanx, Fusileer, and Grenadier, Events HURON LANDING/DIAMOND ACE, MINI JADE, TOMME/MIDNIGHT ZEPHYR, MIDAS MYTH/MILAGRO and MISTY RAIN

DTIC Science & Technology

1993-07-01

General requirements and standards governing safety were based on the FCTC "Safety and Health Compliance Guide for Underground and Nuclear Effects Tests...Defense (DOD)-sponsored underground nuclear tests were conducted from 23 September 1982 through 6 April 1985 to study weapons effects . All six were...weapons- related or effects purposes, and 33 were safety experiments. An additional 24 nuclear experiments were conducted from December 1954 to February

Methodological factors conducting research with incarcerated persons with diabetes.

PubMed

Reagan, Louise; Shelton, Deborah

2016-02-01

The aim of this study was to describe methodological issues specific to conducting research with incarcerated vulnerable populations who have diabetes. Much has been written about the ethical and logistical challenges of conducting research with vulnerable incarcerated populations. However, conducting research with incarcerated persons with diabetes is associated with additional issues related to research design, measurement, sampling and recruitment, and data collection procedures. A cross-sectional study examining the relationships of diabetes knowledge, illness representation and self-care behaviors with glycemic control in 124 incarcerated persons was conducted and serves as the basis for describing methodological factors for the conduct of research with an incarcerated population with diabetes. Within this incarcerated population with diabetes, sampling bias due to gender inequity, recruitment of participants not using insulin, self-reported vision impairment, and a lack of standardized instruments especially for measuring diabetes self-care were methodological challenges. Clinical factors that serve as potential barriers for study conduct were identified as risk for hypoglycemia due to insulin timing and other activities. Conducting research with incarcerated persons diagnosed with diabetes requires attention to a set of methodological concerns above and beyond that of the ethical and legal regulations for protecting the rights of this vulnerable population. To increase opportunities for conducting rigorous as well as facility- and patient-friendly research, researchers need to blend their knowledge of diabetes with an understanding of prison rules and routines. Copyright © 2015 Elsevier Inc. All rights reserved.

Mechanism of resveratrol-induced relaxation in the human gallbladder.

PubMed

Tsai, Ching-Chung; Lee, Ming-Che; Tey, Shu-Leei; Liu, Ching-Wen; Huang, Shih-Che

2017-05-08

Resveratrol is a polyphenolic compound extracted from plants and is also a constituent of red wine. Resveratrol produces relaxation of vascular smooth muscle and may prevent cardiovascular diseases. Although resveratrol has been reported to cause relaxation of the guinea pig gallbladder, limited data are available about the effect of resveratrol on the gallbladder smooth muscle in humans. The purpose of this study was to investigate the relaxation effects of resveratrol in human gallbladder muscle strips. We studied the relaxant effects of resveratrol in human gallbladder. In addition, we also investigated mechanism of resveratrol-induced relaxation in human gallbladder by tetraethylammonium (a non-selective potassium channels blocker), iberiotoxin (an inhibitor of large conductance calcium-activated potassium channel), glibenclamide (an ATP-sensitive potassium channel blocker), charybdotoxin (an inhibitor of large conductance calcium-activated potassium channels and slowly inactivating voltage-gated potassium channels), apamine (a selective inhibitor of the small conductance calcium-activated potassium channel), KT 5720 (a cAMP-dependent protein kinase A inhibitor), KT 5823 (a cGMP-dependent protein kinase G inhibitor), NG-Nitro-L-arginine (a competitive inhibitor of nitric oxide synthase), tetrodotoxin (a selective neuronal Na + channel blocker), and ω-conotoxin GVIA (a selective neuronal Ca 2+ channel blocker). The present study showed that resveratrol has relaxant effects in human gallbladder muscle strips. In addition, we found that resveratrol-induced relaxation in human gallbladder is associated with nitric oxide, ATP-sensitive potassium channel, and large conductance calcium-activated potassium channel pathways. This study provides the first evidence concerning the relaxant effects of resveratrol in human gallbladder muscle strips. Furthermore, these results demonstrate that resveratrol is a potential new drug or health supplement in the treatment of biliary colic.

Li/Ag 2VO 2PO 4 batteries: the roles of composite electrode constituents on electrochemistry

DOE PAGES

Bock, David C.; Bruck, Andrea M.; Pelliccione, Christopher J.; ...

2016-11-01

In this study, we utilize silver vanadium phosphorous oxide, Ag 2VO 2PO 4, as a model system to systematically study the impact of the constituents of a composite electrode, including polymeric and conductive additives, on electrochemistry. Notably, although highly resistive, this bimetallic cathode can be discharged as a pure electroactive material in the absence of a conductive additive as it generates an in situ conductive matrix via a reduction displacement reaction resulting in the formation of silver metal nanoparticles. Also, three different electrode compositions were investigated: Ag 2VO 2PO 4 only, Ag 2VO 2PO 44 with binder, and Ag 2VOmore » 2PO 4 with binder and carbon. Constant current discharge, pulse testing and impedance spectroscopy measurements were used to characterize the electrochemical properties of the electrodes as a function of depth of discharge. In situ EDXRD was used to spatially resolve the discharge progression within the cathode by following the formation of Ag 0. Ex situ XRD and EXAFS modeling were used to quantify the amount of Ag 0 formed. Results indicate that the metal center reduced (V 5+ or Ag +) was highly dependent on composite composition (presence of PTFE, carbon), depth of discharge (Ag 0 nanoparticle formation), and spatial location within the cathode. The addition of a binder was found to increase cell polarization, and the percolation network provided by the carbon in the presence of PTFE was further increased with reduction and formation of Ag 0. Lastly, this study provides insight into the factors controlling the electrochemistry of resistive active materials in composite electrodes.« less

Li/Ag 2VO 2PO 4 batteries: the roles of composite electrode constituents on electrochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bock, David C.; Bruck, Andrea M.; Pelliccione, Christopher J.

In this study, we utilize silver vanadium phosphorous oxide, Ag 2VO 2PO 4, as a model system to systematically study the impact of the constituents of a composite electrode, including polymeric and conductive additives, on electrochemistry. Notably, although highly resistive, this bimetallic cathode can be discharged as a pure electroactive material in the absence of a conductive additive as it generates an in situ conductive matrix via a reduction displacement reaction resulting in the formation of silver metal nanoparticles. Also, three different electrode compositions were investigated: Ag 2VO 2PO 4 only, Ag 2VO 2PO 44 with binder, and Ag 2VOmore » 2PO 4 with binder and carbon. Constant current discharge, pulse testing and impedance spectroscopy measurements were used to characterize the electrochemical properties of the electrodes as a function of depth of discharge. In situ EDXRD was used to spatially resolve the discharge progression within the cathode by following the formation of Ag 0. Ex situ XRD and EXAFS modeling were used to quantify the amount of Ag 0 formed. Results indicate that the metal center reduced (V 5+ or Ag +) was highly dependent on composite composition (presence of PTFE, carbon), depth of discharge (Ag 0 nanoparticle formation), and spatial location within the cathode. The addition of a binder was found to increase cell polarization, and the percolation network provided by the carbon in the presence of PTFE was further increased with reduction and formation of Ag 0. Lastly, this study provides insight into the factors controlling the electrochemistry of resistive active materials in composite electrodes.« less

Regulating DNA Self-assembly by DNA-Surface Interactions.

PubMed

Liu, Longfei; Li, Yulin; Wang, Yong; Zheng, Jianwei; Mao, Chengde

2017-12-14

DNA self-assembly provides a powerful approach for preparation of nanostructures. It is often studied in bulk solution and involves only DNA-DNA interactions. When confined to surfaces, DNA-surface interactions become an additional, important factor to DNA self-assembly. However, the way in which DNA-surface interactions influence DNA self-assembly is not well studied. In this study, we showed that weak DNA-DNA interactions could be stabilized by DNA-surface interactions to allow large DNA nanostructures to form. In addition, the assembly can be conducted isothermally at room temperature in as little as 5 seconds. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Spectral induced polarization of the three-phase system CO2 - brine - sand under reservoir conditions

NASA Astrophysics Data System (ADS)

Börner, Jana H.; Herdegen, Volker; Repke, Jens-Uwe; Spitzer, Klaus

2017-01-01

The spectral complex conductivity of a water-bearing sand during interaction with carbon dioxide (CO2) is influenced by multiple, simultaneous processes. These processes include partial saturation due to the replacement of conductive pore water with CO2 and chemical interaction of the reactive CO2 with the bulk fluid and the grain-water interface. We present a laboratory study on the spectral induced polarization of water-bearing sands during exposure to and flow-through by CO2. Conductivity spectra were measured successfully at pressures up to 30 MPa and 80 °C during active flow and at steady-state conditions concentrating on the frequency range between 0.0014 and 100 Hz. The frequency range between 0.1 and 100 Hz turned out to be most indicative for potential monitoring applications. The presented data show that the impact of CO2 on the electrolytic conductivity may be covered by a model for pore-water conductivity, which depends on salinity, pressure and temperature and has been derived from earlier investigations of the pore-water phase. The new data covering the three-phase system CO2-brine-sand further show that chemical interaction causes a reduction of surface conductivity by almost 20 per cent, which could be related to the low pH-value in the acidic environment due to CO2 dissolution and the dissociation of carbonic acid. The quantification of the total CO2 effect may be used as a correction during monitoring of a sequestration in terms of saturation. We show that this leads to a correct reconstruction of fluid saturation from electrical measurements. In addition, an indicator for changes of the inner surface area, which is related to mineral dissolution or precipitation processes, can be computed from the imaginary part of conductivity. The low frequency range between 0.0014 and 0.1 Hz shows additional characteristics, which deviate from the behaviour at higher frequencies. A Debye decomposition approach is applied to isolate the feature dominating the data at low frequencies. We conclude from our study that electrical conductivity is not only a highly sensitive indicator for CO2 saturation in pore space. When it is measured in its full spectral and complex form it contains additional information on the chemical state of the system, which holds the potential of getting access to both saturation and interface properties with one monitoring method.

A Relative Ranking Approach for Nano-Enabled Applications to Improve Risk-Based Decision Making: A Case Study of Army Materiel

DTIC Science & Technology

2014-12-24

scenarios. The USACEHR has been conducting research and devel- opment efforts on the incorporation of various ENMs into Army materiel, ranging from food ...materiel characteristics, and (3) apply the algorithm and associated risk ranking tool to prioritize additional assessments based on the human health risk...online correspondence to confirm, edit, and supplement the inventory with additional information (See Section 1 in Supplementary Information (SI) for

40 CFR 82.156 - Required practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the additional time needed to conduct and complete repairs in a safe working environment will be... creating a safe working environment will require more than 30 weeks; (B) The operator notifies EPA within... the additional time needed to conduct and complete work in a safe environment will be permitted. (iii...

RF tumour ablation: computer simulation and mathematical modelling of the effects of electrical and thermal conductivity.

PubMed

Lobo, S M; Liu, Z-J; Yu, N C; Humphries, S; Ahmed, M; Cosman, E R; Lenkinski, R E; Goldberg, W; Goldberg, S N

2005-05-01

This study determined the effects of thermal conductivity on RF ablation tissue heating using mathematical modelling and computer simulations of RF heating coupled to thermal transport. Computer simulation of the Bio-Heat equation coupled with temperature-dependent solutions for RF electric fields (ETherm) was used to generate temperature profiles 2 cm away from a 3 cm internally-cooled electrode. Multiple conditions of clinically relevant electrical conductivities (0.07-12 S m-1) and 'tumour' radius (5-30 mm) at a given background electrical conductivity (0.12 S m-1) were studied. Temperature response surfaces were plotted for six thermal conductivities, ranging from 0.3-2 W m-1 degrees C (the range of anticipated clinical and experimental systems). A temperature response surface was obtained for each thermal conductivity at 25 electrical conductivities and 17 radii (n=425 temperature data points). The simulated temperature response was fit to a mathematical model derived from prior phantom data. This mathematical model is of the form (T=a+bRc exp(dR) s(f) exp(g)(s)) for RF generator-energy dependent situations and (T=h+k exp(mR)+n?exp(p)(s)) for RF generator-current limited situations, where T is the temperature (degrees C) 2 cm from the electrode and a, b, c, d, f, g, h, k, m, n and p are fitting parameters. For each of the thermal conductivity temperature profiles generated, the mathematical model fit the response surface to an r2 of 0.97-0.99. Parameters a, b, c, d, f, k and m were highly correlated to thermal conductivity (r2=0.96-0.99). The monotonic progression of fitting parameters permitted their mathematical expression using simple functions. Additionally, the effect of thermal conductivity simplified the above equation to the extent that g, h, n and p were found to be invariant. Thus, representation of the temperature response surface could be accurately expressed as a function of electrical conductivity, radius and thermal conductivity. As a result, the non-linear temperature response of RF induced heating can be adequately expressed mathematically as a function of electrical conductivity, radius and thermal conductivity. Hence, thermal conductivity accounts for some of the previously unexplained variance. Furthermore, the addition of this variable into the mathematical model substantially simplifies the equations and, as such, it is expected that this will permit improved prediction of RF ablation induced temperatures in clinical practice.

Influence of water conductivity on particular electrospray modes with dc corona discharge — optical visualization approach

NASA Astrophysics Data System (ADS)

Pongrác, Branislav; Kim, Hyun-Ha; Negishi, Nobuaki; Machala, Zdenko

2014-08-01

The effect of water conductivity on electrospraying of water was studied in combination with positive DC corona discharge generated in air. We used a point-to-plane geometry of electrodes with a hollow syringe needle anode opposite to the metal mesh cathode. We employed total average current measurements and high-speed camera fast time-resolved imaging. We visualized the formation of a water jet (filament) and investigated corona discharge behavior for various water conductivities. Depending on the conductivity, various jet properties were observed: pointy, prolonged, and fast spreading water filaments for lower conductivity; in contrast to rounder, broader, and shorter quickly disintegrating filaments for higher conductivity. The large acceleration values (4060 m/s2 and 520 m/s2 for 2 μS/cm and 400 μS/cm, respectively) indicate that the process is mainly governed by the electrostatic force. In addition, with increasing conductivity, the breakdown voltage for corona-to-spark transition was decreasing.

75 FR 9924 - Final Comprehensive Conservation Plan for the Red Rock Lakes National Wildlife Refuge, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-04

...-time staff of five employees and various summer temporaries manage and study the refuge habitats and... majority of fishing occurring on Red Rock. In addition, the refuge is open to limited hunting of ducks..., conducting numerous studies to determine the effects and best methods of restoration, including any effects...

Critical Reading Discourse of Pre-Service English Teachers in Turkey

ERIC Educational Resources Information Center

Balikçi, Gözde; Daloglu, Aysegül

2016-01-01

This case study was conducted in order to observe and investigate the critical reading discourse (CRD) of 27 freshman pre-service teachers of English at the department of foreign language teaching at a state university in Turkey. In addition, the study attempts to answer the question of how the critical reading discourse of the students is shaped…

Exploring Reviewer Reactions to Manuscripts Submitted to Academic Journals

ERIC Educational Resources Information Center

Coniam, David

2012-01-01

This paper extends a previous study (Coniam, 2011) into a corpus of manuscript (MS) reviews conducted for the journal System by one reviewer in the eight-year period 2003-2011. The current paper highlights additional facets of the review process that focus on issues involving authors themselves. The study examines two related sets of research…

Efficacy of Virtual Patients in Medical Education: A Meta-Analysis of Randomized Studies

ERIC Educational Resources Information Center

Consorti, Fabrizio; Mancuso, Rosaria; Nocioni, Martina; Piccolo, Annalisa

2012-01-01

A meta-analysis was performed to assess the Effect Size (ES) from randomized studies comparing the effect of educational interventions in which Virtual patients (VPs) were used either as an alternative method or additive to usual curriculum versus interventions based on more traditional methods. Meta-analysis was designed, conducted and reported…

76 FR 58649 - Endangered and Threatened Wildlife and Plants; 12-Month Finding on a Petition To List Van Rossem...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

.... 2003, pp. 1-14). Gelochelidon is a monotypic genus (a genus with only one species, Gelochelidon... ``existing subspecific names have been created far in advance of any adequate study of the facts.'' Murphy's... conduct a genetics-based study that may yield additional information regarding the distinctiveness between...

The Work Values of Japanese Women.

ERIC Educational Resources Information Center

Engel, John W.

Empirical studies of Japanese work ethics have tended to focus on male workers while neglecting women. In addition, work values in both Japan and the United States appear to be changing. More information is needed on the work values of American and Japanese female workers. A study was conducted to explore the work ethics of Japanese women and to…

CUMULATIVE REPRODUCTIVE EFFECTS OF IN UTERO ADMINISTRATION OF A MIXTURE OF TEN “ANTIANDROGENS” IN MALE SD RATS: SYNERGY OR ADDITIVITY?

EPA Science Inventory

In 1996, the USEPA was charged under FQPA to consider the cumulative effects of chemicals in their risk assessments. We are conducting studies to provide a framework for assessing the cumulative effects of antiandrogens. In the current study, ten “antiandrogenic” chemicals were a...

Understanding Bullying and Victimization during Childhood and Adolescence: A Mixed Methods Study

ERIC Educational Resources Information Center

Guerra, Nancy G.; Williams, Kirk R.; Sadek, Shelly

2011-01-01

In the present study, quantitative and qualitative data are presented to examine individual and contextual predictors of bullying and victimization and how they vary by age and gender. Two waves of survey data were collected from 2,678 elementary, middle, and high school youth attending 59 schools. In addition, 14 focus groups were conducted with…

Professional Development and Teacher Leadership in the Era of NCLB: A Study Exploring Elementary Music Teacher Preferences

ERIC Educational Resources Information Center

Bernard, Anthony D., Sr.

2009-01-01

Several recent studies have been conducted on teacher professional development (PD) but few have focused exclusively on elementary music teacher PD. Prominent music education researchers encourage additional research to provide generalizability across the field. In answer to this call for broadening the base of research in elementary music…

An Analyses and Meta-Synthesis of Research on STEM Education

ERIC Educational Resources Information Center

Yildirim, Bekir

2016-01-01

The purpose of the current study is to draw an outline of empirical research studies conducted on STEM education with a focus on student achievement, in addition to their creativity and problem solving skills, attitudes and interests towards STEM subjects. After an initial screening of several articles, papers and dissertations on STEM education,…

Condom Discomfort and Associated Problems with Their Use among University Students

ERIC Educational Resources Information Center

Grosby, Richard; Yarber, William L.; Sanders, Stephanie A.; Graham, Cynthia A.

2005-01-01

In addition to consistent use, condoms must be used correctly. The purpose of this study was to identify prevalence and types of condom-associated discomfort among university students, the outcomes of this discomfort, and the role of discomfort in condom breakage. We conducted a cross-sectional study of 206 students attending a private university…

Education for Sustainable Development: Liberation or Indoctrination? An Assessment of Faculty Members' Attitudes and Classroom Practices

ERIC Educational Resources Information Center

Qablan, Ahmad Mohammad; Al-Ruz, Jamal Abu; Khasawneh, Samer; Al-Omari, Aieman

2009-01-01

The purpose of this study was to investigate the attitudes and classroom practices of environmental science faculty members in Jordanian universities. Mix data collection methodology was employed to collect data in this study. In addition to the developed survey, several participants' interviews and classroom observations were conducted with…

An investigation of hydraulic conductivity estimation in a ground-water flow study of Northern Long Valley, New Jersey

USGS Publications Warehouse

Hill, Mary C.

1985-01-01

The purpose of this study was to develop a methodology to be used to investigate the aquifer characteristics and water supply potential of an aquifer system. In particular, the geohydrology of northern Long Valley, New Jersey, was investigated. Geohydrologic data were collected and analyzed to characterize the site. Analysis was accomplished by interpreting the available data and by using a numerical simulation of the watertable aquifer. Special attention was given to the estimation of hydraulic conductivity values and hydraulic conductivity structure which together define the hydraulic conductivity of the modeled aquifer. Hydraulic conductivity and all other aspects of the system were first estimated using the trial-and-error method of calibration. The estimation of hydraulic conductivity was improved using a least squares method to estimate hydraulic conductivity values and by improvements in the parameter structure. These efforts improved the calibration of the model far more than a preceding period of similar effort using the trial-and-error method of calibration. In addition, the proposed method provides statistical information on the reliability of estimated hydraulic conductivity values, calculated heads, and calculated flows. The methodology developed and applied in this work proved to be of substantial value in the evaluation of the aquifer considered.

Challenges and New Trends for Piezoelectric Actuators

NASA Technical Reports Server (NTRS)

Sehirlioglu, Alp

2008-01-01

BiScO3-PbTiO3 ceramics with TC greater than 400 C has been successfully processed. Despite the increase in TC, excess Pb addition increases both the bulk conductivity and the grain boundary contribution to conductivity at elevated temperatures. Conductivity at elevated temperatures, that limits the operating temperature for actuators, has been greatly reduced by excess Bi additions. Excess Bi doping improves poling conditions resulting in enhanced piezoelectric coefficient (d(sub 33) = 408 pC/N).

Experimental study of the effects of secondary air on the emissions and stability of a lean premixed combustor

NASA Technical Reports Server (NTRS)

Roffe, G.; Raman, R. S. V.; Marek, C. J.

1982-01-01

A study of the effects of secondary air addition on the stability and emissions of a gas turbine combustor has been performed. Tests were conducted with two types of flameholders and varying amounts of dilution air addition. Results indicate that NO(x) decreases with increasing dilution air injection, whereas CO is independent of the amount of dilution air and is related to the gas temperature near the walls. The axial location of the dilution air addition has no effect on the performance or stability. Results also indicate that the amount of secondary air entrained by the flameholder recirculation zone is dependent on the amount of dilution air and flameholder geometry.

Alumina Matrix Composites with Non-Oxide Nanoparticle Addition and Enhanced Functionalities

PubMed Central

Galusek, Dušan; Galusková, Dagmar

2015-01-01

The addition of SiC or TiC nanoparticles to polycrystalline alumina matrix has long been known as an efficient way of improving the mechanical properties of alumina-based ceramics, especially strength, creep, and wear resistance. Recently, new types of nano-additives, such as carbon nanotubes (CNT), carbon nanofibers (CNF), and graphene sheets have been studied in order not only to improve the mechanical properties, but also to prepare materials with added functionalities, such as thermal and electrical conductivity. This paper provides a concise review of several types of alumina-based nanocomposites, evaluating the efficiency of various preparation methods and additives in terms of their influence on the properties of composites. PMID:28347002

Communications Arts and Technology Program Needs Assessment.

ERIC Educational Resources Information Center

Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

In 1992, Oakland Community College conducted a needs assessment study to assist in reviewing and evaluating proposed changes to the college's existing Communications Arts and Technology Program. Businesses and employers in the communications field were surveyed (n=40) regarding employment requirements and opportunities. Additional information was…

BEHAVIOR OF TOLUENE ADDED TO SLUDGE-AMENDED SOILS

EPA Science Inventory

Toluene is a priority pollutant that can be introduced to soils in a variety of wastes, including some municipal sludges. Laboratory experiments were conducted to study the behavior of toluene in two soils in the presence and absence of municipal sludge. Sludge additions increa...

OCCURRENCE OF A NEW GENERATION OF DISINFECTION BY-PRODUCTS

EPA Science Inventory

A survey of disinfection by-product (DBP) occurrence in the United States was conducted at 12 drinking water treatment plants. In addition to currently regulated DBPs, more than 50 DBPs that rated a high priority for potential toxicity were studied. These priority DBPs included...

Growth of Campylobacter Incubated Aerobically in Media Supplemented with Peptones

USDA-ARS?s Scientific Manuscript database

Growth of Campylobacter cultures incubated aerobically in media supplemented with peptones was studied, and additional experiments were conducted to compare growth of the bacteria in media supplemented with peptones to growth in media supplemented with fumarate-pyruvate-minerals-vitamins (FPMV). A b...

North American study on contracting snow and ice response : final report.

DOT National Transportation Integrated Search

2017-01-01

Snow and ice control operations are a vital function often conducted by state and local transportation agencies. Many states are choosing to contract snow and ice response services, instead of or in addition to the use of in-house forces, to maintain...

Barriers to utilization of postnatal care at village level in Klaten district, central Java Province, Indonesia.

PubMed

Probandari, Ari; Arcita, Akhda; Kothijah, Kothijah; Pamungkasari, Eti Poncorini

2017-08-07

Maternal health remains a persisting public health challenge in Indonesia. Postnatal complications, in particular, are considered as maternal health problems priority that should be addressed. Conducting adequate care for postnatal complications will improve the quality of life of mothers and babies. With the universal health coverage implementation, the Indonesian government provides free maternal and child health services close to clients at the village level, which include postnatal care. Our study aimed to explore barriers to utilization of postnatal care at the village level in Klaten district, Central Java Province, Indonesia. A qualitative study was conducted in March 2015 - June 2016 in Klaten district, Central Java, Indonesia. We selected a total of 19 study participants, including eight mothers with postnatal complications, six family members, and five village midwives for in-depth interviews. We conducted a content analysis technique on verbatim transcripts of the interviews using open code software. This study found three categories of barriers to postnatal care utilization in villages: mother and family members' health literacy on postnatal care, sociocultural beliefs and practices, and health service responses. Most mothers did not have adequate knowledge and skills regarding postnatal care that reflected how they lacked awareness and practice of postnatal care. Inter-generational norms and myths hindered mothers from utilizing postnatal care and from having adequate nutritional intake during the postnatal period. Mothers and family members conducted unsafe self-treatment to address perceived minor postnatal complication. Furthermore, social power from extended family influenced the postnatal care health literacy for mother and family members. Postnatal care in the village lacked patient-centered care practices. Additionally, midwives' workloads and capacities to conduct postnatal information, education and counseling were also issues. Despite the government's efforts to provide free postnatal care closer to mothers' homes, other barriers to postnatal care utilization remained. Specifically, among mothers, community, and health services. An innovative approach to increase the health literacy on postnatal care is required. In particular, improving the capacity of midwives to conduct patient-centered care. In addition, village midwives' tasks should be evaluated and reoriented.

Optimization of the oxidant supply system for combined cycle MHD power plants

NASA Technical Reports Server (NTRS)

Juhasz, A. J.

1982-01-01

An in-depth study was conducted to determine what, if any, improvements could be made on the oxidant supply system for combined cycle MHD power plants which could be reflected in higher thermal efficiency and a reduction in the cost of electricity, COE. A systematic analysis of air separation process varitions which showed that the specific energy consumption could be minimized when the product stream oxygen concentration is about 70 mole percent was conducted. The use of advanced air compressors, having variable speed and guide vane position control, results in additional power savings. The study also led to the conceptual design of a new air separation process, sized for a 500 MW sub e MHD plant, referred to a internal compression is discussed. In addition to its lower overall energy consumption, potential capital cost savings were identified for air separation plants using this process when constructed in a single large air separation train rather than multiple parallel trains, typical of conventional practice.

Effects of choline chloride on electrodeposited Ni coating from a Watts-type bath

NASA Astrophysics Data System (ADS)

Wang, Yurong; Yang, Caihong; He, Jiawei; Wang, Wenchang; Mitsuzak, Naotoshi; Chen, Zhidong

2016-05-01

Electrodeposition of bright nickel (Ni) was carried out in a Watts-type bath. Choline chloride (ChCl) was applied as a multifunctional additive and substitute for nickel chloride (NiCl2) in a Watts-type bath. The function of ChCl was investigated through conductivity tests, anodic polarization, and cathodic polarization experiments. The studies revealed that ChCl performed well as a conducting salt, anodic activator, and cathodic inhibitor. The effects of ChCl on deposition rate, preferred orientation, grain size, surface morphology, and microhardness of Ni coatings were also studied. The deposition rate reached a maximum value of greater than 27 μm h-1 when 20 g L-1 ChCl was introduced to the bath. Using X-ray diffraction, it was confirmed that progressive addition of ChCl promoted the preferred crystal orientation modification from (2 0 0) and (2 2 0) to (1 1 1), refined grain size, and enhanced microhardness. The presence of ChCl lowered the roughness of the coating.

Theoretical Considerations for Improving the Pulse Power of a Battery through the Addition of a Second Electrochemically Active Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knehr, K. W.; West, Alan C.

Here, porous electrode theory is used to conduct case studies for when the addition of a second electrochemically active material can improve the pulse-power performance of an electrode. Case studies are conducted for the positive electrode of a sodium metal-halide battery and the graphite negative electrode of a lithium “rocking chair” battery. The replacement of a fraction of the nickel chloride capacity with iron chloride in a sodium metal-halide electrode and the replacement of a fraction of the graphite capacity with carbon black in a lithium-ion negative electrode were both predicted to increase the maximum pulse power by up tomore » 40%. In general, whether or not a second electrochemically active material increases the pulse power depends on the relative importance of ohmic-to-charge transfer resistances within the porous structure, the capacity fraction of the second electrochemically active material, and the kinetic and thermodynamic parameters of the two active materials.« less

Theoretical Considerations for Improving the Pulse Power of a Battery through the Addition of a Second Electrochemically Active Material

DOE PAGES

Knehr, K. W.; West, Alan C.

2016-05-26

Here, porous electrode theory is used to conduct case studies for when the addition of a second electrochemically active material can improve the pulse-power performance of an electrode. Case studies are conducted for the positive electrode of a sodium metal-halide battery and the graphite negative electrode of a lithium “rocking chair” battery. The replacement of a fraction of the nickel chloride capacity with iron chloride in a sodium metal-halide electrode and the replacement of a fraction of the graphite capacity with carbon black in a lithium-ion negative electrode were both predicted to increase the maximum pulse power by up tomore » 40%. In general, whether or not a second electrochemically active material increases the pulse power depends on the relative importance of ohmic-to-charge transfer resistances within the porous structure, the capacity fraction of the second electrochemically active material, and the kinetic and thermodynamic parameters of the two active materials.« less

Additional EIPC Study Analysis. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations weremore » developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.« less

Influence of Water Saturation on Thermal Conductivity in Sandstones

NASA Astrophysics Data System (ADS)

Fehr, A.; Jorand, R.; Koch, A.; Clauser, C.

2009-04-01

Information on thermal conductivity of rocks and soils is essential in applied geothermal and hydrocarbon maturation research. In this study, we investigate the dependence of thermal conductivity on the degree of water saturation. Measurements were made on five sandstones from different outcrops in Germany. In a first step, we characterized the samples with respect to mineralogical composition, porosity, and microstructure by nuclear magnetic resonance (NMR) and mercury injection. We measured thermal conductivity with an optical scanner at different levels of water saturation. Finally we present a simple and easy model for the correlation of thermal conductivity and water saturation. Thermal conductivity decreases in the course of the drying of the rock. This behaviour is not linear and depends on the microstructure of the studied rock. We studied different mixing models for three phases: mineral skeleton, water and air. For argillaceous sandstones a modified arithmetic model works best which considers the irreducible water volume and different pore sizes. For pure quartz sandstones without clay minerals, we use the same model for low water saturations, but for high water saturations a modified geometric model. A clayey sandstone rich in feldspath shows a different behaviour which cannot be explained by simple models. A better understanding will require measurements on additional samples which will help to improve the derived correlations and substantiate our findings.

Dependence of Thermal Conductivity on Water Saturation of Sandstones

NASA Astrophysics Data System (ADS)

Fehr, A.; Jorand, R.; Koch, A.; Clauser, C.

2008-12-01

Information on thermal conductivity of rocks and soils is essential in applied geothermal and hydrocarbon maturation research. In this study, we investigate the dependence of thermal conductivity on the degree of water saturation. Measurements were made on five sandstones from different outcrops in Germany. In a first step, we characterized the samples with respect to mineralogical composition, porosity, and microstructure by nuclear magnetic resonance (NMR) and mercury injection. We measured thermal conductivity with an optical scanner at different levels of water saturation. Finally we present a simple and easy model for the correlation of thermal conductivity and water saturation. Thermal conductivity decreases in the course of the drying of the rock. This behaviour is not linear and depends on the microstructure of the studied rock. We studied different mixing models for three phases: mineral skeleton, water and air. For argillaceous sandstones a modified arithmetic model works best which considers the irreducible water volume and different pore sizes. For pure quartz sandstones without clay minerals, we use the same model for low water saturations, but for high water saturations a modified geometric model. A clayey sandstone rich in feldspath shows a different behaviour which cannot be explained by simple models. A better understanding will require measurements on additional samples which will help to improve the derived correlations and substantiate our findings.

The DOE/DHHS memorandum of understanding: The DOE perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldsmith, R.

1991-01-01

On March 27, 1990, Secretary James D. Watkins established an Office of Health under the Assistant Secretary for Environment, Safety and Health. All epidemiologic activities throughout the department were consolidated into this office as part of an Office of Epidemiology and Health Surveillance (OEHS) with specific responsibilities for occupational and community health surveillance. The mission and functions of the OEHS include the conduct of epidemiologic studies at US Department of Energy (DOE) facilities, nearby communities, and other populations. These studies comprise retrospective mortality studies of DOE contractor workers, hypothesis-generating studies related to the potential health effects of energy production andmore » use, ecologic studies of off-site populations, quick-response investigations of suspected disease clusters, and others as needed. In addition, OEHS is responsible for providing procedures, technical support, and other resources for the conduct of DOE-sponsored epidemiologic research studies to be managed outside of DOE, including analytic studies to be managed by the Department of Health and Human Service (HHS) under a memorandum of understanding (MOU), dose-reconstruction studies, and studies related to DOE facilities to be conducted through state health departments.« less

An examination of the developmental propensity model of conduct problems.

PubMed

Rhee, Soo Hyun; Friedman, Naomi P; Corley, Robin P; Hewitt, John K; Hink, Laura K; Johnson, Daniel P; Smith Watts, Ashley K; Young, Susan E; Robinson, JoAnn; Waldman, Irwin D; Zahn-Waxler, Carolyn

2016-05-01

The present study tested specific hypotheses advanced by the developmental propensity model of the etiology of conduct problems in the Colorado Longitudinal Twin Study, a prospective, longitudinal, genetically informative sample. High negative emotionality, low behavioral inhibition, low concern and high disregard for others, and low cognitive ability assessed during toddlerhood (age 14 to 36 months) were examined as predictors of conduct problems in later childhood and adolescence (age 4 to 17 years). Each hypothesized antisocial propensity dimension predicted conduct problems, but some predictions may be context specific or due to method covariance. The most robust predictors were observed disregard for others (i.e., responding to others' distress with active, negative responses such as anger and hostility), general cognitive ability, and language ability, which were associated with conduct problems reported by parents, teachers, and adolescents, and change in observed negative emotionality (i.e., frustration tolerance), which was associated with conduct problems reported by teachers and adolescents. Furthermore, associations between the most robust early predictors and later conduct problems were influenced by the shared environment rather than genes. We conclude that shared environmental influences that promote disregard for others and detract from cognitive and language development during toddlerhood also predispose individuals to conduct problems in later childhood and adolescence. The identification of those shared environmental influences common to early antisocial propensity and later conduct problems is an important future direction, and additional developmental behavior genetic studies examining the interaction between children's characteristics and socializing influences on conduct problems are needed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Sustained conduction of vasomotor responses in rat mesenteric arteries in a two-compartment in vitro setup.

PubMed

Palao, Teresa; van Weert, Angela; de Leeuw, Anne; de Vos, Judith; Bakker, Erik N T P; van Bavel, Ed

2018-05-21

Conduction of vasomotor responses may contribute to long-term regulation of resistance artery function and structure. Most previous studies have addressed conduction of vasoactivity only during very brief stimulations. We developed a novel setup that allows the local pharmacological stimulation of arteries in vitro for extended periods of time, and studied the conduction of vasomotor responses in rat mesenteric arteries under those conditions. The new in vitro set up was based on the pressure myograph. The superfusion chamber was divided halfway along the vessel into two compartments, allowing an independent superfusion of the arterial segment in each compartment. Local and remote cumulative concentration-response curves were obtained for a range of vasoactive agents. Additional experiments were performed with the gap junction inhibitor 18β-glycyrrhetinic acid and in absence of the endothelium. Phenylephrine-induced constriction and acetylcholine-induced dilation were conducted over a measured distance up to 2.84 mm, and this conduction was maintained for 5 minutes. Conduction of acetylcholine-induced dilation was inhibited by 18β-glycyrrhetinic acid and conduction of phenylephrine-induced constriction was abolished in absence of the endothelium. Constriction in response to high K + was not conducted. Absence of remote stimulation dampened the local response to phenylephrine. This study demonstrates maintained conduction of vasoactive responses to physiological agonists in rat mesenteric small arteries likely via gap junctions and endothelial cells, providing a possible mechanism for the sustained functional and structural control of arterial networks. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Genome-wide association studies in East Asians identify new loci for waist-hip ratio and waist circumference

PubMed Central

Wen, Wanqing; Kato, Norihiro; Hwang, Joo-Yeon; Guo, Xingyi; Tabara, Yasuharu; Li, Huaixing; Dorajoo, Rajkumar; Yang, Xiaobo; Tsai, Fuu-Jen; Li, Shengxu; Wu, Ying; Wu, Tangchun; Kim, Soriul; Guo, Xiuqing; Liang, Jun; Shungin, Dmitry; Adair, Linda S.; Akiyama, Koichi; Allison, Matthew; Cai, Qiuyin; Chang, Li-Ching; Chen, Chien-Hsiun; Chen, Yuan-Tsong; Cho, Yoon Shin; Choi, Bo Youl; Gao, Yutang; Go, Min Jin; Gu, Dongfeng; Han, Bok-Ghee; He, Meian; Hixson, James E.; Hu, Yanling; Huang, Tao; Isono, Masato; Jung, Keum Ji; Kang, Daehee; Kim, Young Jin; Kita, Yoshikuni; Lee, Juyoung; Lee, Nanette R.; Lee, Jeannette; Wang, Yiqin; Liu, Jian-Jun; Long, Jirong; Moon, Sanghoon; Nakamura, Yasuyuki; Nakatochi, Masahiro; Ohnaka, Keizo; Rao, Dabeeru; Shi, Jiajun; Sull, Jae Woong; Tan, Aihua; Ueshima, Hirotsugu; Wu, Chen; Xiang, Yong-Bing; Yamamoto, Ken; Yao, Jie; Ye, Xingwang; Yokota, Mitsuhiro; Zhang, Xiaomin; Zheng, Yan; Qi, Lu; Rotter, Jerome I.; Jee, Sun Ha; Lin, Dongxin; Mohlke, Karen L.; He, Jiang; Mo, Zengnan; Wu, Jer-Yuarn; Tai, E. Shyong; Lin, Xu; Miki, Tetsuro; Kim, Bong-Jo; Takeuchi, Fumihiko; Zheng, Wei; Shu, Xiao-Ou

2016-01-01

Sixty genetic loci associated with abdominal obesity, measured by waist circumference (WC) and waist-hip ratio (WHR), have been previously identified, primarily from studies conducted in European-ancestry populations. We conducted a meta-analysis of associations of abdominal obesity with approximately 2.5 million single nucleotide polymorphisms (SNPs) among 53,052 (for WC) and 48,312 (for WHR) individuals of Asian descent, and replicated 33 selected SNPs among 3,762 to 17,110 additional individuals. We identified four novel loci near the EFEMP1, ADAMTSL3 , CNPY2, and GNAS genes that were associated with WC after adjustment for body mass index (BMI); two loci near the NID2 and HLA-DRB5 genes associated with WHR after adjustment for BMI, and three loci near the CEP120, TSC22D2, and SLC22A2 genes associated with WC without adjustment for BMI. Functional enrichment analyses revealed enrichment of corticotropin-releasing hormone signaling, GNRH signaling, and/or CDK5 signaling pathways for those newly-identified loci. Our study provides additional insight on genetic contribution to abdominal obesity. PMID:26785701

Similarity of markers identified from cancer gene expression studies: observations from GEO.

PubMed

Shi, Xingjie; Shen, Shihao; Liu, Jin; Huang, Jian; Zhou, Yong; Ma, Shuangge

2014-09-01

Gene expression profiling has been extensively conducted in cancer research. The analysis of multiple independent cancer gene expression datasets may provide additional information and complement single-dataset analysis. In this study, we conduct multi-dataset analysis and are interested in evaluating the similarity of cancer-associated genes identified from different datasets. The first objective of this study is to briefly review some statistical methods that can be used for such evaluation. Both marginal analysis and joint analysis methods are reviewed. The second objective is to apply those methods to 26 Gene Expression Omnibus (GEO) datasets on five types of cancers. Our analysis suggests that for the same cancer, the marker identification results may vary significantly across datasets, and different datasets share few common genes. In addition, datasets on different cancers share few common genes. The shared genetic basis of datasets on the same or different cancers, which has been suggested in the literature, is not observed in the analysis of GEO data. © The Author 2013. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

#13ReasonsWhy Health Professionals and Educators are Tweeting: A Systematic Analysis of Uses and Perceptions of Show Content and Learning Outcomes.

PubMed

Walker, Kimberly K; Burns, Kelli

2018-04-27

This study is a content analysis of health professionals' and educators' tweets about a popular Netflix show that depicts teen suicide: 13 Reasons Why. A content analysis of 740 tweets was conducted to determine the main themes associated with professionals' and educators' tweets about the show, as well as the valence of the tweets. Additionally, a thematic analysis of linked content in tweets (n = 178) was conducted to explore additional content shared about the show and modeling outcomes. Results indicated the largest percentage of tweets was related to social learning, particularly about outcomes that could occur from viewing the show. The valence of the tweets about outcomes was more positive than negative. However, linked materials commonly circulated in tweets signified greater concern with unintended learning outcomes. Some of the linked content included media guidelines for reporting on suicide with recommendations that entertainment producers follow the guidelines. This study emphasizes the importance of including social learning objectives in future typologies of Twitter uses and demonstrates the importance of examining linked content in Twitter studies.

Thermal properties of soils: effect of biochar application

NASA Astrophysics Data System (ADS)

Usowicz, Boguslaw; Lukowski, Mateusz; Lipiec, Jerzy

2014-05-01

Thermal properties (thermal conductivity, heat capacity and thermal diffusivity) have a significant effect on the soil surface energy partitioning and resulting in the temperature distribution. Thermal properties of soil depend on water content, bulk density and organic matter content. An important source of organic matter is biochar. Biochar as a material is defined as: "charcoal for application as a soil conditioner". Biochar is generally associated with co-produced end products of pyrolysis. Many different materials are used as biomass feedstock for biochar, including wood, crop residues and manures. Additional predictions were done for terra preta soil (also known as "Amazonian dark earth"), high in charcoal content, due to adding a mixture of charcoal, bone, and manure for thousands of years i.e. approximately 10-1,000 times longer than residence times of most soil organic matter. The effect of biochar obtained from the wood biomass and other organic amendments (peat, compost) on soil thermal properties is presented in this paper. The results were compared with wetland soils of different organic matter content. The measurements of the thermal properties at various water contents were performed after incubation, under laboratory conditions using KD2Pro, Decagon Devices. The measured data were compared with predictions made using Usowicz statistical-physical model (Usowicz et al., 2006) for biochar, mineral soil and soil with addition of biochar at various water contents and bulk densities. The model operates statistically by probability of occurrence of contacts between particular fractional compounds. It combines physical properties, specific to particular compounds, into one apparent conductance specific to the mixture. The results revealed that addition of the biochar and other organic amendments into the soil caused considerable reduction of the thermal conductivity and diffusivity. The mineral soil showed the highest thermal conductivity and diffusivity that decreased in soil with addition of biochar and pure biochar. The reduction of both properties was mostly due to decrease in both particle density and bulk density. Both biochar and the organic amendments addition resulted in a decrease of the heat capacity of the mixtures in dry state and considerable increase in wet state. The lowest and highest reduction in the thermal conductivity with decreasing water content was obtained for pure biochar and mineral soil, respectively. The thermal diffusivity had a characteristic maximum at higher bulk densities and lower water contents. The wetland soil higher in organic matter content exhibit smaller temporal variation of the thermal properties compared to soils lower in organic matter content in response to changes of water content. The statistical-physical model was found to be useful for satisfactory predicting thermal properties of the soil with addition of biochar and organic amendments. Usowicz B. et al., 2006. Thermal conductivity modelling of terrestrial soil media - A comparative study. Planetary and Space Science 54, 1086-1095.

Standing on a Strong Foundation of Servitude: The 1960's Civil Rights Movement, Septima Clark and Other South Carolina African American Women Educators

ERIC Educational Resources Information Center

Hunter, Iris Renell

2012-01-01

This research study examines nine African American women educators during the 1960s Civil Rights Movement in South Carolina. Additionally, the study conducts an analogous study of the lifeworks and contributions of Septima Clark, an African American woman educator who made significant community activist contributions during this period. For its…

The Use of Books and Libraries by Part-Time Business Studies Students at a Polytechnic: A Follow-up Study.

ERIC Educational Resources Information Center

Payne, Philip

To study the effect on library use, of additional expenditure on accounting textbooks needed by part-time business students, a study was conducted in the spring of 1980 at the City of London Polytechnic. Three techniques were used: (1) a questionnaire distributed to all part-time students in the Accountancy Department and, as a control group, all…

Oxidation Resistance, Electrical and Thermal Conductivity, and Spectral Emittance of Fully Dense HfB2 and ZrB2 with SiC, TaSi2, and LaB6 Additives

DTIC Science & Technology

2012-01-26

Resistance , Electrical and Thermal Conductivity, and Spectral Emittance of Fully Dense HfB2 and ZrB2 "With SiC, TaSi2, and LaB6 Additives Sb. GRANT NUMBER... RESISTANCE , ELECTRICAL AND THERMAL CONDUCTIVITY, AND SPECTRAL EMITTANCE OF FULLY DENSE HfB2 AND ZrB2 WITH SiC, TaSi2, AND LaB6 ADDITIVES Air Force Office...thickened regions with dry 220 grit SiC sandpaper so that a low- resistance electrical connection could be achieved. A handheld multimeter was used to measure

Cognitive and affective empathy in children with conduct problems: additive and interactive effects of callous-unemotional traits and autism spectrum disorders symptoms.

PubMed

Pasalich, Dave S; Dadds, Mark R; Hawes, David J

2014-11-30

Callous-unemotional (CU) traits and autism spectrum disorders (ASD) symptoms are characterized by problems in empathy; however, these behavioral features are rarely examined together in children with conduct problems. This study investigated additive and interactive effects of CU traits and ASD symptoms in relation to cognitive and affective empathy in a non-ASD clinic-referred sample. Participants were 134 children aged 3 to 9 years (M=5.60; 79% boys) with oppositional defiant/conduct disorder, and their parents. Clinicians, teachers, and parents reported on dimensions of child behavior, and parental reports of family dysfunction and direct observations of parental warmth/responsiveness assessed quality of family relationships. Results from multiple regression analysis showed that, over and above the effects of child conduct problem severity and quality of family relationships, both ASD symptoms and CU traits were uniquely associated with deficits in cognitive empathy. Moreover, CU traits demonstrated an independent association with affective empathy, and this relationship was moderated by ASD symptoms. That is, there was a stronger negative association between CU traits and affective empathy at higher versus lower levels of ASD symptoms. These findings suggest including both CU traits and ASD-related social impairments in models delineating the atypical development of empathy in children with conduct problems. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

An Experimental Examination of Combustion of Isolated Liquid Fuel Droplets with Polymeric and Nanoparticle Additives

NASA Astrophysics Data System (ADS)

Ghamari, Mohsen

In spite of recent attention to renewable sources of energy, liquid hydrocarbon fuels are still the main source of energy for industrial and transportation systems. Manufactures and consumers are consistently looking for ways to optimize the efficiency of fuel combustion in terms of cost, emissions and consumer safety. In this regard, increasing burning rate of liquid fuels has been of special interest in both industrial and transportation systems. Recent studies have shown that adding combustible nano-particles could have promising effects on improving combustion performance of liquid fuels. Combustible nano-particles could enhance radiative and conductive heat transfer and also mixing within the droplet. Polymeric additive have also shown promising effect on improving fire safety by suppressing spreading behavior and splatter formation in case of crash scenario. Polymers are also known to have higher burning rate than regular hydrocarbon fuels. Therefore adding polymeric additive could have the potential to increase the burning rate. In this work, combustion dynamics of liquid fuel droplets with both polymeric and nanoparticle additives is studied in normal gravity. High speed photography is employed and the effect of additive concentration on droplet burning rate, burning time, extinction and soot morphology is investigated. Polymer added fuel was found to have a volatility controlled combustion with four distinct regimes. The first three zones are associated with combustion of base fuel while the polymer burns last and after a heating zone because of its higher boiling point. Polymer addition reduces the burning rate of the base fuel in the first zone by means of increasing viscosity and results in nucleate boiling and increased burning rates in the second and third stages. Overall, polymer addition resulted in a higher burning rate and shorter burning time in most of the scenarios. Colloidal suspensions of carbon-based nanomaterials in liquid fuels were also tested at different particle loadings. It was found that dispersing nanoparticles results in higher burning rate by means of enhanced radiative heat absorption and thermal conductivity. An optimum particle loading was found for each particle type at which the maximum burning rate was achieved. It was observed that the burning rate again starts to reduce after this optimum point most likely due to the formation of large aggregates that reduce thermal conductivity and suppress the diffusion of species.

Thermal transport characterization of stanene/silicene heterobilayer and stanene bilayer nanostructures

NASA Astrophysics Data System (ADS)

Noshin, Maliha; Intisar Khan, Asir; Subrina, Samia

2018-05-01

Recently, stanene and silicene based nanostructures with low thermal conductivity have incited noteworthy interest due to their prospect in thermoelectrics. Aiming at the possibility of extracting lower thermal conductivity, in this study, we have proposed and modeled stanene/silicene heterobilayer nanoribbons, a new heterostructure and subsequently characterized their thermal transport by using an equilibrium molecular dynamics simulation. In addition, the thermal transport in bilayer stanene is also studied and compared. We have computed the thermal conductivity of the stanene/silicene and bilayer stanene nanostructures to characterize their thermal transport phenomena. The studied nanostructures show good thermal stability within the temperature range of 100-600 K. The room temperature thermal conductivities of pristine 10 nm × 3 nm stanene/silicene hetero-bilayer and stanene bilayer are estimated to be 3.63 ± 0.27 W m-1 K-1 and 1.31 ± 0.34 W m-1 K-1, respectively, which are smaller than that of silicene, graphene and some other 2D monolayers as well as heterobilayers such as stanene/graphene and silicene/graphene. In the temperature range of 100-600 K, the thermal conductivity of our studied bilayer nanoribbons decreases with an increase in the temperature. Furthermore, we have investigated the dependence of our estimated thermal conductivity on the size of the considered nanoribbons. The thermal conductivities of both the nanoribbons are found to increase with an increase in the width of the structure. The thermal conductivity shows a similar increasing trend with the increase in the ribbon length, as well. Our results suggest that, the low thermal conductivity of our studied bilayer structures can be further decreased by nanostructuring. The significantly low thermal conductivity of the stanene/silicene heterobilayer and stanene bilayer nanoribbons realized in our study would provide a good insight and encouragement into their appealing prospect in the thermoelectric applications.

Thermal transport characterization of stanene/silicene heterobilayer and stanene bilayer nanostructures.

PubMed

Noshin, Maliha; Khan, Asir Intisar; Subrina, Samia

2018-05-04

Recently, stanene and silicene based nanostructures with low thermal conductivity have incited noteworthy interest due to their prospect in thermoelectrics. Aiming at the possibility of extracting lower thermal conductivity, in this study, we have proposed and modeled stanene/silicene heterobilayer nanoribbons, a new heterostructure and subsequently characterized their thermal transport by using an equilibrium molecular dynamics simulation. In addition, the thermal transport in bilayer stanene is also studied and compared. We have computed the thermal conductivity of the stanene/silicene and bilayer stanene nanostructures to characterize their thermal transport phenomena. The studied nanostructures show good thermal stability within the temperature range of 100-600 K. The room temperature thermal conductivities of pristine 10 nm × 3 nm stanene/silicene hetero-bilayer and stanene bilayer are estimated to be 3.63 ± 0.27 W m -1 K -1 and 1.31 ± 0.34 W m -1 K -1 , respectively, which are smaller than that of silicene, graphene and some other 2D monolayers as well as heterobilayers such as stanene/graphene and silicene/graphene. In the temperature range of 100-600 K, the thermal conductivity of our studied bilayer nanoribbons decreases with an increase in the temperature. Furthermore, we have investigated the dependence of our estimated thermal conductivity on the size of the considered nanoribbons. The thermal conductivities of both the nanoribbons are found to increase with an increase in the width of the structure. The thermal conductivity shows a similar increasing trend with the increase in the ribbon length, as well. Our results suggest that, the low thermal conductivity of our studied bilayer structures can be further decreased by nanostructuring. The significantly low thermal conductivity of the stanene/silicene heterobilayer and stanene bilayer nanoribbons realized in our study would provide a good insight and encouragement into their appealing prospect in the thermoelectric applications.

A study of satisfaction of medical students on their mentoring programs at one medical school in Korea

PubMed Central

2017-01-01

Purpose The purpose of this study was to investigate the awareness levels of medical students regarding the characteristics of each function within a mentoring program conducted within Kyung Hee University and to ultimately suggest points for reformation. Medical students’ awareness levels were determined using a 29-item questionnaire. Methods The questionnaire was conducted on 347 medical students, excluding 25 students who either marked multiple answers or did not reply. The assessment of the program was based on a questionnaire with the use of a 5-point Likert scale using SPSS version 22.0. Multiple regression was conducted to examine the relationship between the satisfaction level, regarding functions of mentoring programs, and characteristics of mentoring programs. Interviews were conducted to supplement additional information that was hard to gain from the questionnaire. Results The results on demographic and functional characteristics revealed that there was no statistically significant differences in satisfaction levels across gender, whereas there were significant differences across grade levels. In addition, there were significant differences in the frequency of meetings and topics of conversation while the length of meetings and meeting place were not significantly different. Conclusion For the improved mentoring programs for medical students, the program should focus on the frequency of meetings and the topics of conversation. Furthermore, mentoring programs of high quality can be expected if professors take interview results into consideration. Also, students want to be provided with psychosocial advice from mentors in various ways such as role model function. PMID:29207456

Enhancement of thermoelectric properties in the Nb–Co–Sn half-Heusler/Heusler system through spontaneous inclusion of a coherent second phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buffon, Malinda L. C., E-mail: mandibuffon@mrl.ucsb.edu; Verma, Nisha; Lamontagne, Leo

Half-Heusler XYZ compounds with an 18 valence electron count are promising thermoelectric materials, being thermally and chemically stable, deriving from relatively earth-abundant components, and possessing appropriate electrical transport properties. The typical drawback with this family of compounds is their high thermal conductivity. A strategy for reducing thermal conductivity is through the inclusion of secondary phases designed to minimize negative impact on other properties. Here, we achieve this through the addition of excess Co to half-Heusler NbCoSn, which introduces precipitates of a semi-coherent NbCo{sub 2}Sn Heusler phase. A series of NbCo{sub 1+x}Sn materials are characterized here using X-ray and neutron diffractionmore » studies and electron microscopy. Electrical and thermal transport measurements and electronic structure calculations are used to understand property evolution. We find that annealing has an important role to play in determining antisite ordering and properties. Antisite disorder in the as-prepared samples improves thermoelectric performance through the reduction of thermal conductivity, but annealing during the measurement degrades properties to resemble those of the annealed samples. Similar to the more widely studied TiNi{sub 1+x}Sn system, Co addition to the NbCoSn phase results in improved thermoelectric performance through a decrease in thermal conductivity which results in a 20% improvement in the thermoelectric figure of merit, zT.« less

Repairing Nanoparticle Surface Defects.

PubMed

Marino, Emanuele; Kodger, Thomas E; Crisp, Ryan W; Timmerman, Dolf; MacArthur, Katherine E; Heggen, Marc; Schall, Peter

2017-10-23

Solar devices based on semiconductor nanoparticles require the use of conductive ligands; however, replacing the native, insulating ligands with conductive metal chalcogenide complexes introduces structural defects within the crystalline nanostructure that act as traps for charge carriers. We utilized atomically thin semiconductor nanoplatelets as a convenient platform for studying, both microscopically and spectroscopically, the development of defects during ligand exchange with the conductive ligands Na 4 SnS 4 and (NH 4 ) 4 Sn 2 S 6 . These defects can be repaired via mild chemical or thermal routes, through the addition of L-type ligands or wet annealing, respectively. This results in a higher-quality, conductive, colloidally stable nanomaterial that may be used as the active film in optoelectronic devices. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Cobalt Oxide Porous Nanofibers Directly Grown on Conductive Substrate as a Binder/Additive-Free Lithium-Ion Battery Anode with High Capacity.

PubMed

Liu, Hao; Zheng, Zheng; Chen, Bochao; Liao, Libing; Wang, Xina

2017-12-01

In order to reduce the amount of inactive materials, such as binders and carbon additives in battery electrode, porous cobalt monoxide nanofibers were directly grown on conductive substrate as a binder/additive-free lithium-ion battery anode. This electrode exhibited very high specific discharging/charging capacities at various rates and good cycling stability. It was promising as high capacity anode materials for lithium-ion battery.

Vegephy: impact of vegetable oils used as extemporaneous additives on pesticide residues and their crop protection potential.

PubMed

Rousseau, G; Coutanceau, P; Lebeau, F; Pigeon, O; Ducat, N; De Vos, P

2013-01-01

Within the framework of the VEGEPHY project set up to assess the effect of refined oils used as extemporaneous additives, both alone and in combination with oligosaccharides (guar, xanthan and carboxymethyl cellulose), on the quality of plant protection treatments for wheat, a study was conducted on the effect of combinations of additives on the level of pesticide residues in wheat plants and grain and their impact on treatment efficiency. The use of some of these additives gave efficiency results that were comparable with those obtained with additives that are currently used but are not bio-based. The use of refined oils as extemporaneous additives, both alone and combined with oligosaccharides, led to better penetration by the pesticide as well as longer persistence of its activity. The experiments were conducted with fungicides, herbicides, plant growth regulators and various types of formulation (EC, SC and WG). The results obtained were conclusive, but they did depend on the physico-chemical properties of the active substance. The risk of exceeding the maximum residue levels (MRLs) of pesticides was also evaluated. Even where the MRLs had not been not exceeded, the experiments showed that in some cases the treatment with these additives could lead to pesticide residues up to two times higher than those measured for the treatment without additives. It would be necessary, therefore, to reduce the treatment dose associated with the additive and/or have a long enough pre-harvest interval to avoid exceeding the MRLs. The use of green additives could be a useful and easy way to attain the European Union (EU) goal of reducing pesticide use by improving the retention of active substances on the plant and reducing the number of treatments.

Lox droplet vaporization in a supercritical forced convective environment

NASA Technical Reports Server (NTRS)

Hsiao, Chia-Chun; Yang, Vigor

1994-01-01

A systematic investigation has been conducted to study the effects of ambient flow conditions (i.e. pressure and velocity) on supercritical droplet gasification in a forced-convective environment. The model is based on the time-dependent conservation equations in axisymmetric coordinates, and accommodates thermodynamic nonidealities and transport anomalies. In addition, an efficient scheme for evaluating thermophysical properties over the entire range of fluid thermodynamic states is established. The analysis allows a thorough examination of droplet behavior during its entire lifetime, including transient gasification, dynamic deformation, and shattering. A parametric study of droplet vaporization rate in terms of ambient pressure and Reynolds number is also conducted.

Effect of Additives on Green Sand Molding Properties using Design of Experiments and Taguchi's Quality Loss Function - An Experimental Study

NASA Astrophysics Data System (ADS)

Desai, Bhagyashree; Mokashi, Pavani; Anand, R. L.; Burli, S. B.; Khandal, S. V.

2016-09-01

The experimental study aims to underseek the effect of various additives on the green sand molding properties as a particular combination of additives could yield desired sand properties. The input parameters (factors) selected were water and powder (Fly ash, Coconut shell and Tamarind) in three levels. Experiments were planned using design of experiments (DOE). On the basis of plans, experiments were conducted to understand the behavior of sand mould properties such as compression strength, shear strength, permeability number with various additives. From the experimental results it could be concluded that the factors have significant effect on the sand properties as P-value found to be less than 0.05 for all the cases studied. The optimization based on quality loss function was also performed. The study revealed that the quality loss associated with the tamarind powder was lesser compared to other additives selected for the study. The optimization based on quality loss function and the parametric analysis using ANOVA suggested that the tamarind powder of 8 gm per Kg of molding sand and moisture content of 7% yield better properties to obtain sound castings.

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

75 FR 33824 - Pharmaceutical Products and Chemical Intermediates, Fourth Review: Advice Concerning the Addition...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

... production of pharmaceuticals (pharmaceuticals zero-for-zero initiative) and to conduct periodic reviews to... eliminated duties on additional pharmaceutical items. The USTR indicated that participants in the zero- for-zero initiative are conducting a fourth review to determine if products can be added to the initiative...

Studying the Transient Thermal Contact Conductance Between the Exhaust Valve and Its Seat Using the Inverse Method

NASA Astrophysics Data System (ADS)

Nezhad, Mohsen Motahari; Shojaeefard, Mohammad Hassan; Shahraki, Saeid

2016-02-01

In this study, the experiments aimed at analyzing thermally the exhaust valve in an air-cooled internal combustion engine and estimating the thermal contact conductance in fixed and periodic contacts. Due to the nature of internal combustion engines, the duration of contact between the valve and its seat is too short, and much time is needed to reach the quasi-steady state in the periodic contact between the exhaust valve and its seat. Using the methods of linear extrapolation and the inverse solution, the surface contact temperatures and the fixed and periodic thermal contact conductance were calculated. The results of linear extrapolation and inverse methods have similar trends, and based on the error analysis, they are accurate enough to estimate the thermal contact conductance. Moreover, due to the error analysis, a linear extrapolation method using inverse ratio is preferred. The effects of pressure, contact frequency, heat flux, and cooling air speed on thermal contact conductance have been investigated. The results show that by increasing the contact pressure the thermal contact conductance increases substantially. In addition, by increasing the engine speed the thermal contact conductance decreases. On the other hand, by boosting the air speed the thermal contact conductance increases, and by raising the heat flux the thermal contact conductance reduces. The average calculated error equals to 12.9 %.

Perception Gaps on Food Additives among Various Groups in Korea: Food Experts, Teachers, Nutrition Teachers, Nongovernmental Organization Members, and General Consumers.

PubMed

Kang, Hee-Jin; Kim, Suna; Lee, Gunyoung; Lim, Ho Soo; Yun, Sang Soon; Kim, Jeong-Weon

2017-06-01

The purpose of this study was to determine the perceptions and information needs of food experts, teachers, nutrition teachers, members of nongovernmental organizations, and general consumers concerning food additives. Questions in a survey format included perceptions, information needs, and preferred communication channels. The survey was conducted both off-line and on-line via e-mail and Google Drive in March 2015. The results indicated that most Korean consumers are concerned about the safety of using food additives in processed foods and do not recognize these additives as safe and useful materials as part of a modern diet. We also identified perception gaps among different groups regarding food additives. Nutrition teachers and members of nongovernmental organizations in Korea appeared to have a biased perception of food additives, which may cause general consumers to have a negative perception of food additives. The group of food experts did not have this bias. Governmental institutions must overcome the low confidence levels of various groups as an information provider about food additives. Based on the findings in this study, it will be possible to develop a strategy for risk communication about food additives for each group.

Laser surface modification of electrically conductive fabrics: Material performance improvement and design effects

NASA Astrophysics Data System (ADS)

Tunakova, Veronika; Hrubosova, Zuzana; Tunak, Maros; Kasparova, Marie; Mullerova, Jana

2018-01-01

Development of lightweight flexible materials for electromagnetic interference shielding has obtained increased attention in recent years particularly for clothing, textiles in-house use and technical applications especially in areas of aircraft, aerospace, automobiles and flexible electronics such as portable electronics and wearable devices. There are many references in the literature concerning development and investigation of electromagnetic shielding lightweight flexible materials especially textile based with different electrically conductive additives. However, only little attention is paid to designing and enhancing the properties of these special fabrics by textile finishing processes. Laser technology applied as a physical treatment method is becoming very popular and can be used in different applications to make improvement and even overcome drawbacks of some of the traditional processes. The main purpose of this study is firstly to analyze the possibilities of transferring design onto the surface of electrically conductive fabrics by laser beam and secondly to study of effect of surface modification degree on performance of conductive fabric including electromagnetic shielding ability and mechanical properties. Woven fabric made of yarns containing 10% of extremely thin stainless steel fiber was used as a conductive substrate.

The effects of workplace psychosocial factors on whether Japanese dual-earner couples with preschool children have additional children: a prospective study

PubMed Central

EGUCHI, Hisashi; SHIMAZU, Akihito; FUJIWARA, Takeo; IWATA, Noboru; SHIMADA, Kyoko; TAKAHASHI, Masaya; TOKITA, Masahito; WATAI, Izumi; KAWAKAMI, Norito

2016-01-01

This study explored the effect of workplace psychosocial factors (job demand, job control, and workplace social support) on dual-earner couples in Japan having additional children, using a prospective study design. We conducted a 2-year prospective cohort study with 103 dual-earner couples with preschool children in Japan, as part of the Tokyo Work–Family Interface Study II. We used multivariable logistic regression analyses to evaluate the prospective association of job strain (categorized into low-strain job, active job, passive job, and strain job groups) and workplace social support (high and low) with couples having additional children during the follow-up period, adjusting for age, for men and women separately. Men in the active job group (i.e., with high job demands and high job control) had a significantly higher odds ratio (OR) of having additional children during the follow-up period, after controlling for age (OR 9.07, 95% confidence interval: 1.27–64.85). No significant association between any workplace psychosocial factor and having additional children was confirmed among women. Having an active job may have a positive influence on having additional children among men in dual-earner couples. PMID:27760893

Effect of Periodic Water Addition on Citric Acid Production in Solid State Fermentation

NASA Astrophysics Data System (ADS)

Utpat, Shraddha S.; Kinnige, Pallavi T.; Dhamole, Pradip B.

2013-09-01

Water addition is one of the methods used to control the moisture loss in solid state fermentation (SSF). However, none of the studies report the timing of water addition and amount of water to be added in SSF. Therefore, this work was undertaken with an objective to evaluate the performance of periodic water addition on citric acid production in SSF. Experiments were conducted at different moistures (50-80 %) and temperatures (30-40 °C) to simulate the conditions in a fermenter. Citric acid production by Aspergillus niger (ATCC 9029) using sugarcane baggase was chosen as a model system. Based on the moisture profile, citric acid and sugar data, a strategy was designed for periodic addition of water. Water addition at 48, 96, 144 and 192 h enhanced the citric acid production by 62 % whereas water addition at 72, 120, and 168 h increased the citric acid production by just 17 %.

Chirality effect in disordered graphene ribbon junctions

NASA Astrophysics Data System (ADS)

Long, Wen

2012-05-01

We investigate the influence of edge chirality on the electronic transport in clean or disordered graphene ribbon junctions. By using the tight-binding model and the Landauer-Büttiker formalism, the junction conductance is obtained. In the clean sample, the zero-magnetic-field junction conductance is strongly chirality-dependent in both unipolar and bipolar ribbons, whereas the high-magnetic-field conductance is either chirality-independent in the unipolar or chirality-dependent in the bipolar ribbon. Furthermore, we study the disordered sample in the presence of magnetic field and find that the junction conductance is always chirality-insensitive for both unipolar and bipolar ribbons with adequate disorders. In addition, the disorder-induced conductance plateaus can exist in all chiral bipolar ribbons provided the disorder strength is moderate. These results suggest that we can neglect the effect of edge chirality in fabricating electronic devices based on the magnetotransport in a disordered graphene ribbon.

Production of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion

PubMed Central

Kawamura, Go; Alvarez, Samuel; Stewart, Ian E.; Catenacci, Matthew; Chen, Zuofeng; Ha, Yoon-Cheol

2015-01-01

The low performance or high cost of commercially available conductive inks limits the advancement of printed electronics. This article studies the explosion of metal wires in aqueous solutions as a simple, low-cost, and environmentally friendly method to prepare metallic nanoparticles consisting of Cu and Cu alloys for use in affordable, highly conductive inks. Addition of 0.2 M ascorbic acid to an aqueous explosion medium prevented the formation of Cu2O shells around Cu nanoparticles, and allowed for the printing of conductive lines directly from these nanoparticles with no post-treatment. Cu alloy nanoparticles were generated from metal wires that were alloyed as purchased, or from two wires of different metals that were twisted together. Cu nanoparticles alloyed with 1% Sn, 5% Ag, 5% Ni and 30% Ni had electrical conductivities similar to Cu but unlike Cu, remained conductive after 24 hrs at 85 °C and 85% RH. PMID:26669447

Conductance enhancement due to interface magnons in electron-beam evaporated MgO magnetic tunnel junctions with CoFeB free layer deposited at different pressure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, P.; Yu, G. Q.; Wei, H. X.

Electron-beam evaporated MgO-based magnetic tunnel junctions have been fabricated with the CoFeB free layer deposited at Ar pressure from 1 to 4 mTorr, and their tunneling process has been studied as a function of temperature and bias voltage. By changing the growth pressure, the junction dynamic conductance dI/dV, inelastic electron tunneling spectrum d²I/dV², and tunneling magnetoresistance vary with temperature. Moreover, the low-energy magnon cutoff energy E {sub C} derived from the conductance versus temperature curve agrees with interface magnon energy obtained directly from the inelastic electron tunneling spectrum, which demonstrates that interface magnons are involved in the electron tunneling process,more » opening an additional conductance channel and thus enhancing the total conductance.« less

Electrical conductivity modeling and experimental study of densely packed SWCNT networks.

PubMed

Jack, D A; Yeh, C-S; Liang, Z; Li, S; Park, J G; Fielding, J C

2010-05-14

Single-walled carbon nanotube (SWCNT) networks have become a subject of interest due to their ability to support structural, thermal and electrical loadings, but to date their application has been hindered due, in large part, to the inability to model macroscopic responses in an industrial product with any reasonable confidence. This paper seeks to address the relationship between macroscale electrical conductivity and the nanostructure of a dense network composed of SWCNTs and presents a uniquely formulated physics-based computational model for electrical conductivity predictions. The proposed model incorporates physics-based stochastic parameters for the individual nanotubes to construct the nanostructure such as: an experimentally obtained orientation distribution function, experimentally derived length and diameter distributions, and assumed distributions of chirality and registry of individual CNTs. Case studies are presented to investigate the relationship between macroscale conductivity and nanostructured variations in the bulk stochastic length, diameter and orientation distributions. Simulation results correspond nicely with those available in the literature for case studies of conductivity versus length and conductivity versus diameter. In addition, predictions for the increasing anisotropy of the bulk conductivity as a function of the tube orientation distribution are in reasonable agreement with our experimental results. Examples are presented to demonstrate the importance of incorporating various stochastic characteristics in bulk conductivity predictions. Finally, a design consideration for industrial applications is discussed based on localized network power emission considerations and may lend insight to the design engineer to better predict network failure under high current loading applications.

Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Composites

NASA Technical Reports Server (NTRS)

Kang, Jin Ho; Cano, Roberto J.; Ratcliffe, James G.; Luong, Hoa; Grimsley, Brian W.; Siochi, Emilie J.

2016-01-01

For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strengthand stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Despite several attempts to solve these issues with the addition of carbon nanotubes (CNT) into polymer matrices, and/or by interleaving CNT sheets between conventional carbon fiber (CF) composite layers, there are still interfacial problems that exist between CNTs (or CF) and the resin. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing (double cantilever beam and end-notched flexure test). Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated. Interleaving CNT sheets significantly improved the in-plane (axial and perpendicular direction of CF alignment) thermal conductivity of the hybrid composite laminates by 50 - 400%.

Methodological approaches in conducting overviews: current state in HTA agencies.

PubMed

Pieper, Dawid; Antoine, Sunya-Lee; Morfeld, Jana-Carina; Mathes, Tim; Eikermann, Michaela

2014-09-01

Overviews search for reviews rather than for primary studies. They might have the potential to support decision making within a shorter time frame by reducing production time. We aimed to summarize available instructions for authors intending to conduct overviews as well as the currently applied methodology of overviews in international Health Technology Assessment (HTA) agencies. We identified 127 HTA agencies and scanned their websites for methodological handbooks as well as published overviews as HTA reports. Additionally, we contacted HTA agencies by e-mail to retrieve possible unidentified handbooks or other related sources. In total, eight HTA agencies providing methodological support were found. Thirteen HTA agencies were found to have produced overviews since 2007, but only six of them published more than four overviews. Overviews were mostly employed in HTA products related to rapid assessment. Additional searches for primary studies published after the last review are often mentioned in order to update results. Although the interest in overviews is rising, little methodological guidance for the conduct of overviews is provided by HTA agencies. Overviews are of special interest in the context of rapid assessments to support policy-making within a short time frame. Therefore, empirical work on overviews needs to be extended. National strategies and experience should be disclosed and discussed. Copyright © 2013 John Wiley & Sons, Ltd.

Water Based Phase Change Material Heat Exchanger Development

NASA Technical Reports Server (NTRS)

Hansen, Scott W.; Sheth, Ribik B.; Atwell, Matt; Cheek, Ann; Agarwal, Muskan; Hong, Steven; Patel, Aashini,; Nguyen, Lisa; Posada, Luciano

2014-01-01

In a cyclical heat load environment such as low Lunar orbit, a spacecraft’s radiators are not sized to reject the full heat load requirement. Traditionally, a supplemental heat rejection device (SHReD) such as an evaporator or sublimator is used to act as a “topper” to meet the additional heat rejection demands. Utilizing a Phase Change Material (PCM) heat exchanger (HX) as a SHReD provides an attractive alternative to evaporators and sublimators as PCM HXs do not use a consumable, thereby leading to reduced launch mass and volume requirements. Studies conducted in this paper investigate utilizing water’s high latent heat of formation as a PCM, as opposed to traditional waxes, and corresponding complications surrounding freezing water in an enclosed volume. Work highlighted in this study is primarily visual and includes understanding ice formation, freeze front propagation, and the solidification process of water/ice. Various test coupons were constructed of copper to emulate the interstitial pin configuration (to aid in conduction) of the proposed water PCM HX design. Construction of a prototypic HX was also completed in which a flexible bladder material and interstitial pin configurations were tested. Additionally, a microgravity flight was conducted where three copper test articles were frozen continuously during microgravity and 2-g periods and individual water droplets were frozen during microgravity.

A Study of Ignition Effects on Thruster Performance of a Multi-Electrode Capillary Discharge Using Visible Emission Spectroscopy Diagnostics

DTIC Science & Technology

2009-09-01

observed today, it is discussed further in Section 1.1. In addition to the work done in propulsion with coaxial electro thermal pulse plasma thrusters (PPTs...initial plasma conditions. The literature supported these findings for more basic laboratory capillaries, but the effect on a thruster device was unknown...An in- depth investigation of different ignition systems were conducted for a capillary discharge based pulsed plasma thruster. In addition to

Tunable heat conduction through coupled Fermi-Pasta-Ulam chains

NASA Astrophysics Data System (ADS)

Su, Ruixia; Yuan, Zongqiang; Wang, Jun; Zheng, Zhigang

2015-01-01

We conduct a study on heat conduction through coupled Fermi-Pasta-Ulam (FPU) chains by using classical molecular dynamics simulations. Our attention is dedicated to showing how the phonon transport is affected by the interchain coupling. It has been well accepted that the heat conduction could be impeded by the interchain interaction due to the interface phonon scattering. However, recent theoretical and experimental studies suggest that the thermal conductivity of nanoscale materials can be counterintuitively enhanced by the interaction with the substrate. In the present paper, by consecutively varying the interchain coupling intensity, we observed both enhancement and suppression of thermal transport through the coupled FPU chains. For weak interchain couplings, it is found that the heat flux increases with the coupling intensity, whereas in the case of strong interchain couplings, the energy transport is found to be suppressed by the interchain interaction. Based on the phonon spectral energy density method, we attribute the enhancement of the energy transport to the excited phonon modes (in addition to the intrinsic phonon modes), while the upward shift of the high-frequency phonon branch and the interface phonon-phonon scattering account for the suppressed heat conduction.

Multiple Masculinity

ERIC Educational Resources Information Center

Il'inykh, S. A.

2012-01-01

Data from a sociological study conducted in Novosibirsk show that in this Russian population the "real man" is expected to pursue victory, risk, struggle, leadership, and success. In addition, however, there is also a natural masculinity in which there is no rigid framework of the image of the "real man." Moreover, natural…

Interrupted Visual Searches Reveal Volatile Search Memory

ERIC Educational Resources Information Center

Shen, Y. Jeremy; Jiang, Yuhong V.

2006-01-01

This study investigated memory from interrupted visual searches. Participants conducted a change detection search task on polygons overlaid on scenes. Search was interrupted by various disruptions, including unfilled delay, passive viewing of other scenes, and additional search on new displays. Results showed that performance was unaffected by…

A Study of an Emerging Occupation: The Gastroenterology Assistant. Interim Report.

ERIC Educational Resources Information Center

Kuritsky, Joel; Goldsmith, Katherine L.

To determine the need, desirability, and training requirements for a gastroenterology assistant training program, interviews with gastroenterologists, a survey of 15 hospitals, and observations of gastroenterology laboratories were conducted. In addition, a questionnaire to ascertain which laboratory tests the assistant would perform was…

Evaluation of propfan propulsion applied to general aviation

NASA Technical Reports Server (NTRS)

Awker, R. W.

1986-01-01

Propfan propulsion on business aircraft was evaluated. Comparisons, in terms of cost and performance, were made between propfan propulsion systems and conventional turbofan propulsion systems on a typical business aircraft. In addition, configuration and cost sensitivity studies were conducted to further assess the potential of propfan propulsion.

International Business Program Needs Assessment.

ERIC Educational Resources Information Center

Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

In 1991, a study was conducted by Oakland Community College to evaluate the need for a proposed International Business program. General information was obtained from a literature search, various governmental and public interest agencies involved in international business, and other southeast Michigan community colleges. In addition, a survey was…

An examination of the operation and motorist usage of Virginia's highway rest areas and welcome centers.

DOT National Transportation Integrated Search

1988-01-01

This study was conducted to examine existing conditions at Virginia's interstate rest areas and welcome centers and to assess what impact additional services, such as vending machines, might have on the service delivery of these facilities. A selecte...

Higher Education-Business Interaction Survey. Research Report.

ERIC Educational Resources Information Center

Charles, David; Conway, Cheryl

A survey was conducted to study the interactions between higher education and business in the United Kingdom, updating previous surveys, and capturing the key outputs of such interactions, taking into account the institutions' differing missions, strategies, capacities, and expertise. Additional purposes were to quantify a baseline for the…

"Think Tank" Workshop in Work Evaluation: March 19-21, 1969.

ERIC Educational Resources Information Center

Hoffman, Paul R., Ed.

A two-day workshop, conducted to study the different meanings of the concept of work evaluation, was participated in by representatives from rehabilitation facilities, work evaluation training programs, institutional organizations, and rehabilitation research and training centers. In addition, different types of patient populations were…

Evaluation of a 6% hydrogen peroxide tooth whitening gel on enamel and dentine microhardness in vitro.

PubMed

Joiner, Andrew; Thakker, Gopal; Cooper, Yvonne

2004-01-01

The aims of this study were to evaluate the effects of a novel 6% hydrogen peroxide containing tooth whitener, Xtra White (XW), on enamel and dentine microhardness in vitro. Polished human enamel and dentine specimens were prepared and baseline microhardness determined. In study 1, enamel specimens were exposed to 20 min cycles of either water, XW or Sprite Light for up to 28 cycles. In studies 2 and 3, enamel specimens were treated with 20 min cycles of either XW or water and exposed to whole saliva at all other times. In study 3, an additional exposure to a fluoride containing toothpaste was conducted. In total, 28 treatments were conducted in order to simulate a 2 weeks product use. In study 4, dentine specimens were treated as per study 3. Final microhardness measurements were taken and for studies 3 and 4 colour measurements were additionally taken. XW and water gave no statistically significant (p>0.05) changes in enamel and dentine microhardness after 28 treatments. Sprite Light gave a significant (p<0.00002) reduction in enamel microhardness after one 20 min treatment. XW showed significant bleaching of enamel and dentine specimens as compared to the water control. XW does not have any significant effect on enamel and dentine microhardness.

When red lights look yellow.

PubMed

Wood, Joanne M; Atchison, David A; Chaparro, Alex

2005-11-01

Red signals are typically used to signify danger. This study was conducted to investigate a situation identified by train drivers in which red signals appear yellow when viewed at long distances (approximately 900 m) through progressive-addition lenses. A laboratory study was conducted to investigate the effects of defocus, target size, ambient illumination, and surround characteristics on the extent of the color misperception of train signals by nine visually normal participants. The data from the laboratory study were validated in a field study by measuring the amounts of defocus and the distances at which the misperception of the color of train signals was apparent and whether these distances varied as a function of time of day. The laboratory study demonstrated that small red targets (approximately 1 min arc) can appear yellow when viewed through small amounts of defocus (approximately +0.75 D) under bright illumination (1910 cd/m(2)). In the field study, the defocus needed to produce the color misperception was similar to that found in the laboratory study. Time of day affected the color misperception, and there was no misperception at night. The color misperception is not solely associated with progressive-addition lenses, but occurs in the presence of small amounts of positive defocus. The potential for the misperception to result in collisions and fatalities presents a major safety concern.

Conductivity, A Simple Method to Probe Micellar Solutions

NASA Astrophysics Data System (ADS)

Bachofer, Steven J.

1996-09-01

A conductivity experiment on the tetradecyltrimethylammonium X-benzoate surfactants and the corresponding sodium X-benzoate salts demonstrates how this physical property can be applied to the study of the complex equilibria of ionic micellar aggregates. The surfactant CMC and fractional ionization constant (alpha) values are determined from the conductivity measurements. A student class studies the surfactants, in which a number of substituted benzoate counterions are utilized, and can be introduced to Quantitative Structure-Activity Relationships (QSAR) to explain the resulting CMC values. High quality data can be recorded with ease. The data from a student class illustrate that CMC values are sensitive to the hydrophobicity of the X-benzoate anion. However, hydrophobicity is not the only important parameter to be considered. The student class can propose other important factors with some additional reading of the colloidal literature.

An overview of aeroelasticity studies for the National Aero-Space Plane

NASA Technical Reports Server (NTRS)

Ricketts, Rodney H.; Noll, Thomas E.; Whitlow, Woodrow, Jr.; Huttsell, Lawrence J.

1993-01-01

The National Aero-Space Plane (NASP), or X-30, is a single-stage-to-orbit vehicle that is designed to takeoff and land on conventional runways. Research in aeroelasticity was conducted by the NASA and the Wright Laboratory to support the design of a flight vehicle by the national contractor team. This research includes the development of new computational codes for predicting unsteady aerodynamic pressures. In addition, studies were conducted to determine the aerodynamic heating effects on vehicle aeroelasticity and to determine the effects of fuselage flexibility on the stability of the control systems. It also includes the testing of scale models to better understand the aeroelastic behavior of the X-30 and to obtain data for code validation and correlation. This paper presents an overview of the aeroelastic research which has been conducted to support the airframe design.

Dilatant effect enhancers for silica dispersions in poly(propylene glycols).

PubMed

Orawiec, Marcin; Kaczorowski, Marcin; Rokicki, Gabriel

2018-05-29

Shear thickening fluids have found many applications in energy damping materials such as sports guards and liquid body armors. Therefore, an additive which could tailor the dilatant properties of such fluids without significantly affecting other properties, especially zero shear viscosity, could significantly increase the versatility of protective materials based on shear thickening fluids. In this paper, poly(propylene glycols) (PPGs) diacetates are investigated as dilatant effect enhancers for nano-silica dispersions in poly(propylene glycols). The influence of the modifiers on rheological properties of the dispersion is studied and discussed. Additionally, FTIR and rheological properties measurements are conducted in order to determine relative interactions strength between hydroxyl groups of PPGs and silica and carbonyl groups of PPG diacetates. Our findings suggest that the relative attractive interaction strength in studied systems can be arranged in the following order: COCO < COOH < OHOH. Therefore, the addition of PPG diacetate hinders the attractive interactions between liquid and solid. We report that the addition of diacetates can lead both to enhancement and deterioration of dilatant effect depending on the concentration of the modifier and its chain length. Based on conducted measurements and literature data, mechanism explaining that phenomenon is suggested. As a result, we propose an easy to make and cheap dilatant effect enhancer for widely used shear thickening fluids which, when used in small amounts (1-2.5%), raises the viscosity jump drastically. Additionally, the presence of the modifier does not significantly affect the zero shear viscosity of the shear thickening fluid. Copyright © 2018 Elsevier Inc. All rights reserved.

High Reynolds Number Investigation of a Flush-Mounted, S-Duct Inlet With Large Amounts of Boundary Layer Ingestion

NASA Technical Reports Server (NTRS)

Berrier, Bobby L.; Carter, Melissa B.; Allan, Brian G.

2005-01-01

An experimental investigation of a flush-mounted, S-duct inlet with large amounts of boundary layer ingestion has been conducted at Reynolds numbers up to full scale. The study was conducted in the NASA Langley Research Center 0.3-Meter Transonic Cryogenic Tunnel. In addition, a supplemental computational study on one of the inlet configurations was conducted using the Navier-Stokes flow solver, OVERFLOW. Tests were conducted at Mach numbers from 0.25 to 0.83, Reynolds numbers (based on aerodynamic interface plane diameter) from 5.1 million to 13.9 million (full-scale value), and inlet mass-flow ratios from 0.29 to 1.22, depending on Mach number. Results of the study indicated that increasing Mach number, increasing boundary layer thickness (relative to inlet height) or ingesting a boundary layer with a distorted profile decreased inlet performance. At Mach numbers above 0.4, increasing inlet airflow increased inlet pressure recovery but also increased distortion. Finally, inlet distortion was found to be relatively insensitive to Reynolds number, but pressure recovery increased slightly with increasing Reynolds number.

Air pollution effects on food quality. 2nd annual progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pell, E.J.

1979-02-01

Progress is reported in studies to determine the effect of acute, toxic exposures of ozone to alfalfa, potato, and soybean plants. The objective has been to correlate the foliar response with alterations in quality of the edible portion of the plant viz. the leaf, tuber and seed of alfalfa, potato and soybean, respectively. In 1977 we (1) modified our fumigation facilities, (2) developed protocol for studies with alfalfa and potato, and (3) conducted studies on flavonoid status of alfalfa and a series of parameters of potato tubers. In 1978 we (1) conducted more indepth studies with alfalfa, (2) repeated themore » potato study, (3) began to develop protocol for measuring additional parameters of alfalfa and potato quality, and (4) developed protocol for cultivating and exposing soybean plants.« less

Using Copper Nanoparticle Additive to Improve the Performance of Silicon Anodes in Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Bachand, Gabrielle

In the foreseeable future, global energy demand is expected to rapidly increase as a result of the swelling population and higher standards of living. Current energy generation and transportation methods predominantly involve the combustion of non-renewable fossil fuels, and greenhouse gas emissions from these processes have been shown to contribute to global climate change and to be detrimental to human and environmental health. To satisfy future energy needs and to reduce greenhouse gas emissions, the advancement of renewable energy generation and electric vehicles is important. The proliferation of intermittent renewable energy sources (such as solar and wind) and electric vehicles depends upon reliable, high-capacity energy storage to serve the practical needs of society. The present-day lithium-ion battery offers excellent qualities for this purpose; however, improvements in the capacity and cost-effectiveness of these batteries are needed for further growth. As an anode material, silicon has exceptionally high theoretical capacity and is an earth-abundant, low-cost option. However, silicon also suffers from poor conductivity and long-term stability, prompting many studies to investigate the use of additive materials to mitigate these issues. This thesis focuses on the improvement of silicon anode performance by using a nanoparticulate copper additive to increase material conductivity and an inexpensive, industry-compatible anode fabrication process. Three main fabrication processes were explored using differing materials and heat treatment techniques for comparison. Anodes were tested using CR2032 type coin cells. The final anodes with the most-improved characteristics were fabricated using a high-temperature heating step for the anode material, and an additional batch was formed to test the viability of the copper additive functioning as a full substitute for carbon black, which is the traditional choice of conductive additive for electrode materials. Anodes materials were characterized using a variety of techniques including scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectrometry (ICP-OES), Raman spectroscopy, and X-ray diffraction (XRD) to evaluate surface qualities and material content. Electrochemical techniques including electrochemical impedance spectroscopy (EIS) and charge/discharge cycling were also used to determine the conductivity and functional behavior of the anode materials. Anodes from the final experimental study achieved initial capacities of 309 mA/g and 957 mA/g for the silicon-only control and silicon with copper additive anodes, respectively, demonstrating an over 300% increase in specific capacity. Si-Cu (NC) anodes also showed superior performance over control anodes with an initial capacity of 775 mA/g. For all three anodes, high efficiencies of over 96% were achieved for the testing duration of 100 cycles and reached near or over 99% in final cycles. Results also show a significant decrease in the resistance of anodes with copper additive, contributing to the improved performance of these anodes.

Cost-efficiency of knowledge creation: randomized controlled trials vs. observational studies.

PubMed

Struck, Rafael; Baumgarten, Georg; Wittmann, Maria

2014-04-01

This article reviews traditional and current perspectives on randomized, controlled trials (RCTs) and observational studies relative to the economic implications for public healthcare stakeholders. It takes an average of 17 years to bring 14% of original research into clinical practice. Results from high-quality observational studies may complement limited RCTs in primary and secondary literature bases, and enhance the incorporation of sound evidence-based guidelines. Observational findings from comprehensive medical databases may offer valuable clues on the effectiveness and relevance of public healthcare interventions. Major expenditures associated with RCTs relate to recruitment, inappropriate site selection, conduct and reporting. Application of business strategies and economic evaluation tools, in addition to the planning and conduct of RCTs, may enhance clinical trial site performances. Considering the strengths and limitations of each study type, clinical researchers should explore the contextual worthiness of either design in promulgating knowledge. They should focus on quality of conduct and reporting that may allow for the liberation of limited public and private clinical research funding.

Low Leachable Container System Consisting of a Polymer-Based Syringe with Chlorinated Isoprene Isobutene Rubber Plunger Stopper.

PubMed

Kiminami, Hideaki; Takeuchi, Katsuyuki; Nakamura, Koji; Abe, Yoshihiko; Lauwers, Philippe; Dierick, William; Yoshino, Keisuke; Suzuki, Shigeru

2015-01-01

A 36 month leachable study on water for injection in direct contact within a polymer-based prefillable syringe consisting of a cyclo olefin polymer barrel, a chlorinated isoprene isobutene rubber plunger stopper, a polymer label attached on the barrel, and a secondary packaging was conducted at 25 ± 2 °C and 60 ± 5% relative humidity. Through the various comparison studies, no difference in the leachable amounts was observed between this polymer-based prefilled syringe and a glass bottle as a blank sample reference by 36 months. No influence on the leachables study outcome was noted from the printed label and/or label adhesive or from the secondary packaging. In an additional study, no acrylic acid used as the label adhesive leachable was detected by an extended storage for 45 months at 25 ± 2 °C and 60 ± 5% relative humidity as a worst case. To obtain more details, a comparison extractable study was conducted between a cyclo olefin polymer barrel and a glass barrel. In addition, chlorinated isoprene isobutene rubber and bromo isoprene isobutene rubber were compared. As a result, no remarkable difference was found in the organic extractables for syringe barrels. On the other hand, in the case of element extractable analysis, the values for the cyclo olefin polymer barrel were lower than that for the glass barrel. For the plunger stoppers, the chlorinated isoprene isobutene rubber applied in this study was showing a lower extractable profile as compared to the bromo isoprene isobutene rubber, both for organic and element extractables. In conclusion, the proposed polymer-based prefillable syringe system has great potential and represents a novel alternative that can achieve very low level extractable profiles and can bring additional value to the highly sensitive biotech drug market. A 36 month leachable study on water for injection in direct contact within a cyclo olefin polymer barrel and chlorinated isoprene isobutene rubber plunger stopper that has a polymer label attached to the barrel and is wrapped into a secondary packaging was conducted at 25 °C and 60% relative humidity. Through the various comparison studies, no difference in the leachable amounts was observed between polymer-based prefilled syringes and a glass bottle as a blank sample reference by 36 months. No influences on the leachables study outcome were noted from the secondary packaging. To obtain more details, a comparison extractable study was conducted between the cyclo olefin polymer and the glass barrel. In addition, chlorinated isoprene isobutene rubber and bromo isoprene isobutene rubber plunger stoppers were compared as well. As a result, no remarkable difference was found in the organic extractables for barrels. As for element extractable analysis, the values for the cyclo olefin polymer barrel were lower than that for the glass barrel. For the plunger stoppers, the chlorinated isoprene isobutene rubber applied in this study was showing a lower extractable profile as compared to the bromo isoprene isobutene rubber, both for organic and element extractables. In conclusion, the proposed polymer-based prefillable syringe system has great potential and represents a novel alternative that can achieve very low level extractable profiles and can bring additional value to the highly sensitive biotech drug market. © PDA, Inc. 2015.

An in-depth description of bipolar resistive switching in Cu/HfOx/Pt devices, a 3D kinetic Monte Carlo simulation approach

NASA Astrophysics Data System (ADS)

Aldana, S.; Roldán, J. B.; García-Fernández, P.; Suñe, J.; Romero-Zaliz, R.; Jiménez-Molinos, F.; Long, S.; Gómez-Campos, F.; Liu, M.

2018-04-01

A simulation tool based on a 3D kinetic Monte Carlo algorithm has been employed to analyse bipolar conductive bridge RAMs fabricated with Cu/HfOx/Pt stacks. Resistive switching mechanisms are described accounting for the electric field and temperature distributions within the dielectric. The formation and destruction of conductive filaments (CFs) are analysed taking into consideration redox reactions and the joint action of metal ion thermal diffusion and electric field induced drift. Filamentary conduction is considered when different percolation paths are formed in addition to other conventional transport mechanisms in dielectrics. The simulator was tuned by using the experimental data for Cu/HfOx/Pt bipolar devices that were fabricated. Our simulation tool allows for the study of different experimental results, in particular, the current variations due to the electric field changes between the filament tip and the electrode in the High Resistance State. In addition, the density of metallic atoms within the CF can also be characterized along with the corresponding CF resistance description.

Thermoelectric properties of FeAs based superconductors, with thick perovskite- and Sm-O fluorite-type blocking layers

NASA Astrophysics Data System (ADS)

Singh, S. J.; Shimoyama, J.; Ogino, H.; Kishio, K.

2015-11-01

The transport properties (electrical resistivity, Hall and Seebeck coefficient, and thermal conductivity) of iron based superconductors with thick perovskite-type oxide blocking layers and fluorine-doped SmFeAsO were studied to explore their possible potential for thermoelectric applications. The thermal conductivity of former compounds depicts the dominated role of phonon and its value decreases rapidly below the Tc, suggesting the addition of scattering of phonons. Both the Seebeck coefficient (S) and Hall coefficient (RH) of all samples were negative in the whole temperature region below 300 K, indicating that the major contribution to the normal state conductivity is by electrons. In addition, the profile of S(T) and RH(T) of all samples have similar behaviours as would be expected for a multi-band superconductors. Although the estimated thermoelectric figure of merit (ZT) of these compounds was much lower than that of practically applicable thermoelectric materials, however its improvement can be expected by optimizing microstructure of the polycrystalline materials, such as densification and grain orientation.

"Cold" Fixation: Reconciliation of Nitrogen Fixation Rates and Diazotroph Assemblages in the Arctic Ocean

NASA Astrophysics Data System (ADS)

Fong, A. A.; Waite, A.; Rost, B.; Richter, K. U.

2016-02-01

Measurements of biological nitrogen fixation are typically conducted in oligotrophic subtropical and tropical marine environments where concentrations of fixed inorganic nitrogen are low. To date, only a handful of nitrogen fixation studies have been conducted in high latitude marine environments, but further investigation is needed to resolve the distribution of cold ocean diazotrophic assemblages. Nitrogen fixation rates and nifH gene distributions were measured at seven stations from 5°E to 20°E, north of 81°N in the Arctic Ocean at the onset of summer 2015. Discrete water samples in ice-covered regions were collected from the sea surface to 200 m for 15N2-tracer additions and targeted nifH gene and transcript analyses. Previous work suggests that heterotrophic bacteria dominate diazotrophic communities in the Arctic Ocean. Therefore, additional nifH gene surveys of sinking particles were conducted to test for enrichment on organic matter-rich microenvironments. Together, these measurements aim to reconcile diazotrophic activity with microbial community composition, further elucidating how nitrogen fixers could impact current concepts in polar carbon and nutrient cycling.

Microstructure and Properties of a High-Strength Cu-Ni-Si-Co-Zr Alloy

NASA Astrophysics Data System (ADS)

Chenna Krishna, S.; Srinath, J.; Jha, Abhay K.; Pant, Bhanu; Sharma, S. C.; George, Koshy M.

2013-07-01

A high-strength Cu-Ni-Si alloy was developed with the additions of Co and Zr. The aging curve for the alloy was generated using hardness. Electron microscopy studies were conducted to analyze the phases in the alloy. Two types of phases, one of copper matrix and the other of Ni-Si-Co-Zr intermetallic phase, could be identified using scanning electron microscopy. Transmission electron microscopy studies confirmed the presence of two types of precipitates in solution-treated and aged (STA) condition, i.e., Ni2Si and Co2Si. Mechanical properties and electrical conductivity were evaluated in solution-treated (ST) and STA conditions. Aging of the ST samples at 500 °C for 3 h has shown an increase of 72 and 15% in yield strength (YS) and electrical conductivity, respectively. This increase in YS and conductivity on aging is primarily attributed to the formation of fine Ni2Si and Co2Si precipitates.

Effect of blending and nanoparticles on the ionic conductivity of solid polymer electrolyte systems

NASA Astrophysics Data System (ADS)

Manjunatha, H.; Damle, R.; Kumaraswamy, G. N.

2018-05-01

In the present work, a polymer electrolyte blend containing polymers Poly ethylene oxide (PEO) and Poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) was prepared. The polymer blend was complexed with potassium trifluoromethanesulfonate (KCF3SO3), and titanium oxide nanoparticles (TiO2) (10nm size) were dispersed in to the complex at different weight percentages. The conductivity due to ions in the blend is determined by Ac impedance measurements in the frequency range of 10Hz-1MHz. The nano composite polymer blend containing 5wt% of TiO2 shows a conductivity of 7.95×10-5Scm-1, which is almost 1.5 orders more than polymer electrolyte with PEO as a polymer. XRD studies show a decrease in the coherence length of XRD peaks on addition of nanoparticles, which is due to increase the amorphous phase in the systems. Temperature dependence conductivity studies of the systems shows that, activation energy decreases with increase in the percentage of nanoparticles in the blend.

Preparation of polypyrrole-embedded electrospun poly(lactic acid) nanofibrous scaffolds for nerve tissue engineering

PubMed Central

Zhou, Jun-feng; Wang, Yi-guo; Cheng, Liang; Wu, Zhao; Sun, Xiao-dan; Peng, Jiang

2016-01-01

Polypyrrole (PPy) is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly(lactic acid) (PLA) nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topography. There was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration. PMID:27904497

'Rumours' and clinical trials: a retrospective examination of a paediatric malnutrition study in Zambia, southern Africa

PubMed Central

2010-01-01

Background Many public health researchers conducting studies in resource-constrained settings have experienced negative 'rumours' about their work; in some cases they have been reported to create serious challenges and derail studies. However, what may appear superficially as 'gossip' or 'rumours' can also be regarded and understood as metaphors which represent local concerns. For researchers unaccustomed to having concerns expressed from participants in this manner, possible reactions can be to be unduly perturbed or conversely dismissive. This paper represents a retrospective examination of a malnutrition study conducted by an international team of researchers in Zambia, Southern Africa. The fears of mothers whose children were involved in the study and some of the concerns which were expressed as rumours are also presented. This paper argues that there is an underlying logic to these anxieties and to dismiss them simply as 'rumours' or 'gossip' would be to overlook the historic and socio-economic factors which have contributed to their production. Methods Qualitative interviews were conducted with the mothers whose children were involved in the study and with the research nurses. Twenty five face-to-face interviews and 2 focus group discussions (FGDs) were conducted with mothers. In addition, face-to-face interviews were conducted with research nurses participating in the trial. Results A prominent anxiety expressed as rumours by the mothers whose children were involved in the study was that recruitment into the trial was an indicator that the child was HIV-infected. Other anxieties included that the trial was a disguise for witchcraft or Satanism and that the children's body parts would be removed and sold. In addition, the liquid, milk-based food given to the children to improve their nutrition was suspected of being insufficiently nutritious, thus worsening their condition. The form which these anxieties took, such as rumours related to the stealing of body parts and other anxieties about a stigmatised condition, provide an insight into the historical, socio-economic and cultural influences in such settings. Conclusions Employing strategies to understand local concerns should accompany research aims to achieve optimal success. The concerns raised by the participants we interviewed are not unique to this study. They are produced in countries where the historic, socio-economic and cultural settings communicate anxieties in this format. By examining this study we have shown that by contextualizing these 'rumours', the concerns they express can be constructively addressed and in turn result in the successful conduct of research aims. PMID:20849580

'Rumours' and clinical trials: a retrospective examination of a paediatric malnutrition study in Zambia, southern Africa.

PubMed

Kingori, Patricia; Muchimba, Maureen; Sikateyo, Bornwell; Amadi, Beatrice; Kelly, Paul

2010-09-17

Many public health researchers conducting studies in resource-constrained settings have experienced negative 'rumours' about their work; in some cases they have been reported to create serious challenges and derail studies. However, what may appear superficially as 'gossip' or 'rumours' can also be regarded and understood as metaphors which represent local concerns. For researchers unaccustomed to having concerns expressed from participants in this manner, possible reactions can be to be unduly perturbed or conversely dismissive.This paper represents a retrospective examination of a malnutrition study conducted by an international team of researchers in Zambia, Southern Africa. The fears of mothers whose children were involved in the study and some of the concerns which were expressed as rumours are also presented. This paper argues that there is an underlying logic to these anxieties and to dismiss them simply as 'rumours' or 'gossip' would be to overlook the historic and socio-economic factors which have contributed to their production. Qualitative interviews were conducted with the mothers whose children were involved in the study and with the research nurses. Twenty five face-to-face interviews and 2 focus group discussions (FGDs) were conducted with mothers. In addition, face-to-face interviews were conducted with research nurses participating in the trial. A prominent anxiety expressed as rumours by the mothers whose children were involved in the study was that recruitment into the trial was an indicator that the child was HIV-infected. Other anxieties included that the trial was a disguise for witchcraft or Satanism and that the children's body parts would be removed and sold. In addition, the liquid, milk-based food given to the children to improve their nutrition was suspected of being insufficiently nutritious, thus worsening their condition.The form which these anxieties took, such as rumours related to the stealing of body parts and other anxieties about a stigmatised condition, provide an insight into the historical, socio-economic and cultural influences in such settings. Employing strategies to understand local concerns should accompany research aims to achieve optimal success. The concerns raised by the participants we interviewed are not unique to this study. They are produced in countries where the historic, socio-economic and cultural settings communicate anxieties in this format. By examining this study we have shown that by contextualizing these 'rumours', the concerns they express can be constructively addressed and in turn result in the successful conduct of research aims.

Acceptance and Commitment Therapy Group Treatment for Symptoms of Borderline Personality Disorder: A Public Sector Pilot Study

ERIC Educational Resources Information Center

Morton, Jane; Snowdon, Sharon; Gopold, Michelle; Guymer, Elise

2012-01-01

A pilot study of a brief group-based Acceptance and Commitment Therapy (ACT) intervention (12 two-hour sessions) was conducted with clients of public mental health services meeting four or more criteria for borderline personality disorder (BPD). Participants were randomly assigned to receive the ACT group intervention in addition to their current…

Surviving a Thousand Cuts: America's Public Schools and the Recession. Report of Findings

ERIC Educational Resources Information Center

Ellerson, Noelle M.

2010-01-01

This study is the tenth in a series of studies conducted by the American Association of School Administrators on the impact of the economic downturn on schools. AASA launched the series in fall 2008 in response to state budget shortfalls, federal buyouts and interventions, and a series of additional events characterizing a slowing, stagnant…

An Analysis of the Use and Structure of Logic in Japanese Argument.

ERIC Educational Resources Information Center

Hazen, Michael David

A study was conducted to determine if the Japanese use logic and argument in different ways than do Westerners. The study analyzed sample rebuttal speeches (in English) of 14 Japanese debaters using the Toulmin model of argument. In addition, it made comparisons with a sample of speeches made by 5 American high school debaters. Audiotapes of the…

Views on Parent-Child Connectedness among English- and Spanish-Speaking Parents of High-Risk Youth

ERIC Educational Resources Information Center

Scarborough, Megan; Kulkarni, Shanti; Lewis, Carol M.; Palen, Lori-Ann; Wade, Emily; Pierce, Amy

2011-01-01

This study highlights findings from focus groups on parent-child connectedness conducted with English- and Spanish-speaking parents of high-risk youth in the southern United States. The primary aim of the study was to extend research on parent-child connectedness, a broad protective factor for adolescent risk behavior. In addition to describing…

77 FR 1073 - Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-09

... participation in a research study (routine use 3). (g) Providing for disclosure to the public of information... investigators who conduct research of products regulated by FDA, for example a clinical investigation that... welfare, or participation in a research study. 4. Disclosure may be made to the public of information...

Findings from an Independent Evaluation of the AMNH's Online Seminars on Science Course: "The Solar System"

ERIC Educational Resources Information Center

Inverness Research, 2009

2009-01-01

Inverness Research studied the American Museum of Natural History (AMNH) Seminars on Science program for eight years, from its inception in 1998 to 2006. In 2009, Inverness Research conducted additional studies of the AMNH's new online course, The Solar System. This paper presents teacher survey ratings for The Solar System, along with profiles of…

Economic Impact of the Hawaii State Public Library System (HSPLS) on the Business and Tourism Industries Study: Final Report

ERIC Educational Resources Information Center

Ryan, Joe; McClure, Charles R.

2003-01-01

Ryan Information Management conducted a return on investment (ROI) study of the economic value of the Hawaii State Public Library System (HSPLS) and identified potential additional sources of operating revenue. HSPLS economic value was examined from four viewpoints, HSPLS: direct economic impact, market value, peer comparison and value to library…

A Study of Attitudes Associated with Retraining. Part I. Work Resource and Retraining Initiative.

ERIC Educational Resources Information Center

Miskovic, Darlene

A study was conducted to develop an understanding of retraining from the perspective of those who have experienced it--to know more about how and why they decided to undertake the process of acquiring new or additional work skills, how they learned about the alternatives available to them, and what feelings accompanied this experience. Research…

Weathering the Storm: How the Economic Recession Continues to Impact School Districts. Report of Findings

ERIC Educational Resources Information Center

Ellerson, Noelle M.

2012-01-01

This study is the twelfth in a series of studies conducted by the American Association of School Administrators (AASA) on the impact of the economic downturn on schools. AASA launched the series in fall 2008 in response to state budget shortfalls, federal buyouts and interventions, and a series of additional events characterizing a slowing,…

Evaluation of Public Service Advertising Messages with Local and Non-Local Source Attribution: A Controlled Laboratory Experiment.

ERIC Educational Resources Information Center

Lynn, Jerry R.; Gagnard, Alice

A study was conducted to examine message evaluations of selected public service advertisements (PSAs) by a young adult population and to test whether local and nonlocal source attribution would influence those evaluations. In addition, the study investigated the extent to which audience characteristics such as fatalism (the degree to which a…

One Year Later: How the Economic Downturn Continues to Impact School Districts. Report of Findings

ERIC Educational Resources Information Center

Ellerson, Noelle M.; McCord, Robert S.

2009-01-01

This study is the sixth in a series of studies conducted by the American Association of School Administrators on the impact of the economic downturn on schools. AASA launched the series in fall 2008 in response to state budget shortfalls, federal buy-outs and interventions, and a series of additional events characterizing a slowing, stagnant…

Teaching Addition and Subtraction Operations with Schematic Place-Value Learning Aids & the Impact on Arithmetic Competency

ERIC Educational Resources Information Center

Kyriakidou-Christofidou, Athina

2016-01-01

The present mixed-methods quasi-experimental study (embedding a case study and a mixed factorial within-between ANOVA test), conducted in a private English school in Limassol, Cyprus, investigated how the use of the schematic learning aids (researcher-made color-coded flash-cards and grids) influence year-2 children's ability to read, write and…

Developmentally dynamic genome: Evidence of genetic influences on increases and decreases in conduct problems from early childhood to adolescence

PubMed Central

Pingault, Jean-Baptiste; Rijsdijk, Frühling; Zheng, Yao; Plomin, Robert; Viding, Essi

2015-01-01

The development of conduct problems in childhood and adolescence is associated with adverse long-term outcomes, including psychiatric morbidity. Although genes constitute a proven factor of stability in conduct problems, less is known regarding their role in conduct problems’ developmental course (i.e. systematic age changes, for instance linear increases or decreases).Mothers rated conduct problems from age 4 to 16 years in 10,038 twin pairs from the Twins Early Development Study. Individual differences in the baseline level (.78; 95% CI: .68-.88) and the developmental course of conduct problems (.73; 95% CI: .60-.86) were under high and largely independent additive genetic influences. Shared environment made a small contribution to the baseline level but not to the developmental course of conduct problems. These results show that genetic influences not only contribute to behavioural stability but also explain systematic change in conduct problems. Different sets of genes may be associated with the developmental course versus the baseline level of conduct problems. The structure of genetic and environmental influences on the development of conduct problems suggests that repeated preventive interventions at different developmental stages might be necessary to achieve a long-term impact. PMID:25944445

Developmentally dynamic genome: Evidence of genetic influences on increases and decreases in conduct problems from early childhood to adolescence.

PubMed

Pingault, Jean-Baptiste; Rijsdijk, Frühling; Zheng, Yao; Plomin, Robert; Viding, Essi

2015-05-06

The development of conduct problems in childhood and adolescence is associated with adverse long-term outcomes, including psychiatric morbidity. Although genes constitute a proven factor of stability in conduct problems, less is known regarding their role in conduct problems' developmental course (i.e. systematic age changes, for instance linear increases or decreases).Mothers rated conduct problems from age 4 to 16 years in 10,038 twin pairs from the Twins Early Development Study. Individual differences in the baseline level (.78; 95% CI: .68-.88) and the developmental course of conduct problems (.73; 95% CI: .60-.86) were under high and largely independent additive genetic influences. Shared environment made a small contribution to the baseline level but not to the developmental course of conduct problems. These results show that genetic influences not only contribute to behavioural stability but also explain systematic change in conduct problems. Different sets of genes may be associated with the developmental course versus the baseline level of conduct problems. The structure of genetic and environmental influences on the development of conduct problems suggests that repeated preventive interventions at different developmental stages might be necessary to achieve a long-term impact.

Impact of Phosphorus-Based Food Additives on Bone and Mineral Metabolism.

PubMed

Gutiérrez, Orlando M; Luzuriaga-McPherson, Alexandra; Lin, Yiming; Gilbert, Linda C; Ha, Shin-Woo; Beck, George R

2015-11-01

Phosphorus-based food additives can substantially increase total phosphorus intake per day, but the effect of these additives on endocrine factors regulating bone and mineral metabolism is unclear. This study aimed to examine the effect of phosphorus additives on markers of bone and mineral metabolism. Design and Setting, and Participants: This was a feeding study of 10 healthy individuals fed a diet providing ∼1000 mg of phosphorus/d using foods known to be free of phosphorus additives for 1 week (low-additive diet), immediately followed by a diet containing identical food items; however, the foods contained phosphorus additives (additive-enhanced diet). Parallel studies were conducted in animals fed low- (0.2%) and high- (1.8%) phosphorus diets for 5 or 15 weeks. The changes in markers of mineral metabolism after each diet period were measured. Participants were 32 ± 8 years old, 30% male, and 70% black. The measured phosphorus content of the additive-enhanced diet was 606 ± 125 mg higher than the low-additive diet (P < .001). After 1 week of the low-additive diet, consuming the additive-enhanced diet for 1 week significantly increased circulating fibroblast growth factor 23 (FGF23), osteopontin, and osteocalcin concentrations by 23, 10, and 11%, respectively, and decreased mean sclerostin concentrations (P < .05 for all). Similarly, high-phosphorus diets in mice significantly increased blood FGF23, osteopontin and osteocalcin, lowered sclerostin, and decreased bone mineral density (P < .05 for all). The enhanced phosphorus content of processed foods can disturb bone and mineral metabolism in humans. The results of the animal studies suggest that this may compromise bone health.

Rapid prototype extruded conductive pathways

DOEpatents

Bobbitt, III, John T.

2016-06-21

A process of producing electrically conductive pathways within additively manufactured parts and similar parts made by plastic extrusion nozzles. The process allows for a three-dimensional part having both conductive and non-conductive portions and allows for such parts to be manufactured in a single production step.

Variants of callous-unemotional conduct problems in a community sample of adolescents.

PubMed

Fanti, Kostas A; Demetriou, Chara A; Kimonis, Eva R

2013-07-01

Callous-unemotional traits are believed to be a childhood precursor to psychopathy, and among youth with conduct problems they designate those showing a particularly severe, stable, and aggressive pattern of antisocial behavior. Youth with callous-unemotional traits are a heterogeneous population and, analogous to adults with psychopathy, research suggests that lower anxious primary and high-anxious secondary variants exist. Using a community sample of 2,306 Greek-Cypriot adolescents (M age = 16 years; 49.7 % female), the first aim of the study was to examine whether variants of callous-unemotional traits could be identified using latent profile analysis of scores on measures of callous-unemotional traits, conduct problems, and anxiety. Additional aims of the study were to compare the identified clusters on external measures theorized to distinguish them (i.e., self-esteem, narcissism, impulsivity, sensation seeking and proactive/reactive aggression) and social factors relevant to adolescent development. Results indicated that, in addition to low risk (i.e., low scores on callous-unemotional traits, conduct problems, and anxiety) and anxious (i.e., high scores on anxiety, low scores on callous-unemotional traits and conduct problems) subgroups, two groups of youth scoring high on callous-unemotional traits and conduct problems were identified. High-anxious secondary callous-unemotional variants were distinguished by lower self-esteem in combination with greater narcissism, aggression, and markedly higher conduct problems, whereas lower anxious primary variants showed higher self-esteem. Secondary callous-unemotional variants also reported greater susceptibility to peer pressure and popularity striving than primary variants. Both variants exhibited poorer outcomes relative to low risk and anxious youth, although anxious youth reported lower self-esteem and higher impulsivity and reactive aggression scores in comparison with low risk youth. Findings integrate two lines of inquiry focused on subtyping children and adults with psychopathic traits and antisocial behaviors. They also support the utility of subtyping callous-unemotional traits based on conduct problems and anxiety levels and provide information on common and distinct risk factors associated with primary and secondary callous-unemotional variants in a community sample of adolescent boys and girls.

Influence of Silicon-Containing Additives on Concrete Waterproofness Property

NASA Astrophysics Data System (ADS)

Butakova, M. D.; Saribekyan, S. S.; Mikhaylov, A. V.

2017-11-01

The article studies the influence of silicon-containing additives on the property of the water resistance of concrete samples. It provides a review of the literature on common approaches and technologies improving concrete waterproofness and reinforced concrete structures. Normal hardening samples were obtained on the basis of concretes containing microsilica, aerosil or ash, or the combinations thereof. This research is aimed at the study of the complex modifier effect r on the basis of metakaolin, superplasticizer and silicon containing additives on the property of concrete water resistance. The need to use a superplasticizer to reduce the water-cement ratio and metakaolin as a hardening accelerator along with the set of strength is substantiated. This article describes a part of the results of the experiment conducted to find alternative options for colmatizing expensive additives used in the concreting foundations of private house-building. The implementation of the scientific work will not only clarify this area but will also broaden the knowledge of such additive as aerosol.

The effects of flue gas desulfurization (FGD) system additives on solid by-products. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huyck, K.A.; Tatum, G.S.; DeKraker, D.P.

This study was designed to examine characteristics of by-products from flue gas desulfurization (FGD) systems that use performance-enhancing additives. The by-products were evaluated for handling, disposal, properties, and utilization potential. This study was designed to identify potential operation-limiting consequences (fatal flaws) caused by using FGD system additives. It was not intended to be an all-encompassing study of the possible process, environmental, and utilization circumstances at each plant. Seven utilities conducting additive testing agreed to provide samples for this study both before and during their testing. Solid samples were collected from FGD systems using the following additives: di-basic acid (DBA), whichmore » is a mixture of succinic, glutaric, and adipic acids; formate; sulfur; ethylene diamine tetraacetic acid (EDTA); and chloride. Changes in handling properties that may alter process operations were observed at sites where DBS was used. Changes in leaching behavior, permeability and unconfined compressive strength (properties that affect by-product disposal properties) showed no clear trend for additive or system type. The intent of this study is to provide an overall assessment of potential system-limiting effects of FGD additive use. There were no overriding problems relating to disposal with the use of additives. However, properties of solids produced with and without additives should be tested at each site prior to use of an FGD system additive. This is necessary because of the variability in state disposal and permitting requirements and the influence of specific operating conditions on by-product properties.« less

A regularized variable selection procedure in additive hazards model with stratified case-cohort design.

PubMed

Ni, Ai; Cai, Jianwen

2018-07-01

Case-cohort designs are commonly used in large epidemiological studies to reduce the cost associated with covariate measurement. In many such studies the number of covariates is very large. An efficient variable selection method is needed for case-cohort studies where the covariates are only observed in a subset of the sample. Current literature on this topic has been focused on the proportional hazards model. However, in many studies the additive hazards model is preferred over the proportional hazards model either because the proportional hazards assumption is violated or the additive hazards model provides more relevent information to the research question. Motivated by one such study, the Atherosclerosis Risk in Communities (ARIC) study, we investigate the properties of a regularized variable selection procedure in stratified case-cohort design under an additive hazards model with a diverging number of parameters. We establish the consistency and asymptotic normality of the penalized estimator and prove its oracle property. Simulation studies are conducted to assess the finite sample performance of the proposed method with a modified cross-validation tuning parameter selection methods. We apply the variable selection procedure to the ARIC study to demonstrate its practical use.

Effects of β-sheet crystals and a glycine-rich matrix on the thermal conductivity of spider dragline silk.

PubMed

Park, Jinju; Kim, Duckjong; Lee, Seung-Mo; Choi, Ji-Ung; You, Myungil; So, Hye-Mi; Han, Junkyu; Nah, Junghyo; Seol, Jae Hun

2017-03-01

We measured the thermal conductivity of Araneus ventricosus' spider dragline silk using a suspended microdevice. The thermal conductivity of the silk fiber was approximately 0.4Wm -1 K -1 at room temperature and gradually increased with an increasing temperature in a manner similar to that of other disordered crystals or proteins. In order to elucidate the effect of β-sheet crystals in the silk, thermal denaturation was used to reduce the quantity of the β-sheet crystals. A calculation with an effective medium approximation supported this measurement result showing that the thermal conductivity of β-sheet crystals had an insignificant effect on the thermal conductivity of SDS. Additionally, the enhancement of bonding strength in a glycine-rich matrix by atomic layer deposition did not increase the thermal conductivity. Thus, this study suggests that the disordered part of the glycine-rich matrix prevented the peptide chains from being coaxially extended via the cross-linking covalent bonds. Copyright © 2016 Elsevier B.V. All rights reserved.

Reliability and effective thermal conductivity of three metallic-ceramic composite insulating coatings on cooled hydrogen-oxygen rockets

NASA Technical Reports Server (NTRS)

Price, H. G., Jr.; Schacht, R. L.; Quentmeyer, R. J.

1973-01-01

An experimental investigation of the structural integrity and effective thermal conductivity of three metallic-ceramic composite coatings was conducted. These coatings were plasma sprayed onto the combustion side of water-cooled, 12.7-centimeter throat diameter, hydrogen-oxygen rocket thrust chambers operating at 2.07 to 4.14 meganewtons per square meter chamber pressure. The metallic-ceramic composites functioned for six to 17 cycles and for as long as 213 seconds of rocket operations and could have probably provided their insulating properties for many additional cycles. The effective thermal conductivity of all the coatings was in the range of 0.7472 to 4.483 w/(m)(K), which makes the coatings a very effective thermal barrier. Photomicrographic studies of cross-sectioned coolant tubes seem to indicate that the effective thermal conductivity of the coatings is controlled by contact resistance between the particles, as a result of the spraying process, and not the thermal conductivity of the bulk materials.

Thermal Conductivity of Eutectic Nitrates and Nitrates/Expanded Graphite Composite as Phase Change Materials.

PubMed

Xiao, Xin; Zhang, Peng; Meng, Zhao-Nan; Li, Ming

2015-04-01

Nitrates and eutectic nitrate mixtures are considered as potential phase change materials (PCMs) for the middle-temperature-range solar energy storage applications. But the extensive utilization is restricted by the poor thermal conductivity and thermal stability. In the present study, sodium nitrate-potassium nitrate eutectic mixture was used as the base PCM, and expanded graphite (EG) was added to the mixture so as to improve the thermal conductivities. The elaboration method consists of a physically mixing of salt powders with or without EG, and the composite PCMs were cold-compressed to form shape-stabilized PCMs at room temperature. The thermal conductivities of the composite PCMs fabricated by cold-compression were investigated at different temperatures by the steady state method. The results showed that the addition of EG significantly enhanced the thermal conductivities. The thermal conductivities of pure nitrates and nitrates/EG composite PCMs in solid state showed the behavior of temperature dependant, and they slightly decreased with the increase of the temperature.

Cohort Profile: The Social Environment and Biomarkers of Aging Study (SEBAS) in Taiwan

PubMed Central

Cornman, Jennifer C; Glei, Dana A; Goldman, Noreen; Chang, Ming-Cheng; Lin, Hui-Sheng; Chuang, Yi-Li; Hurng, Baai-Shyun; Lin, Yu-Hsuan; Lin, Shu-Hui; Liu, I-Wen; Liu, Hsia-Yuan; Weinstein, Maxine

2016-01-01

The Social Environment and Biomarkers of Aging Study (SEBAS) is a nationally representative longitudinal survey of Taiwanese middle-aged and older adults. It adds the collection of biomarkers and performance assessments to the Taiwan Longitudinal Study of Aging (TLSA), a nationally representative study of adults aged 60 and over, including the institutionalized population. The TLSA began in 1989, with follow-ups approximately every 3 years; younger refresher cohorts were added in 1996 and 2003. The first wave of SEBAS, based on a sub-sample of respondents from the 1999 TLSA, was conducted in 2000. A total of 1023 respondents completed both a face-to-face home interview and, several weeks later, a hospital-based physical examination. In addition to a 12-h (7 pm–7 am) urine specimen collected the night before and a fasting blood specimen collected during the examination, trained staff measured blood pressure, height, weight and waist and hip circumferences. A second wave of SEBAS was conducted in 2006 using a similar protocol to SEBAS 2000, but with the addition of performance assessments conducted by the interviewers at the end of the home interview. Both waves of SEBAS also included measures of health status (physical, emotional, cognitive), health behaviours, social relationships and exposure to stressors. The SEBAS data, which are publicly available at [http://www.icpsr.umich.edu/icpsrweb/NACDA/studies/3792/version/5], allow researchers to explore the relationships among life challenges, the social environment and health and to examine the antecedents, correlates and consequences of change in biological measures and health. PMID:25205853

Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS2/Nanotube Composite Lithium Ion Battery Electrodes.

PubMed

Liu, Yuping; He, Xiaoyun; Hanlon, Damien; Harvey, Andrew; Khan, Umar; Li, Yanguang; Coleman, Jonathan N

2016-06-28

Advances in lithium ion batteries would facilitate technological developments in areas from electrical vehicles to mobile communications. While two-dimensional systems like MoS2 are promising electrode materials due to their potentially high capacity, their poor rate capability and low cycle stability are severe handicaps. Here, we study the electrical, mechanical, and lithium storage properties of solution-processed MoS2/carbon nanotube anodes. Nanotube addition gives up to 10(10)-fold and 40-fold increases in electrical conductivity and mechanical toughness, respectively. The increased conductivity results in up to a 100× capacity enhancement to ∼1200 mAh/g (∼3000 mAh/cm(3)) at 0.1 A/g, while the improved toughness significantly boosts cycle stability. Composites with 20 wt % nanotubes combine high reversible capacity with excellent cycling stability (e.g., ∼950 mAh/g after 500 cycles at 2 A/g) and high rate capability (∼600 mAh/g at 20 A/g). The conductivity, toughness, and capacity scale with nanotube content according to percolation theory, while the stability increases sharply at the mechanical percolation threshold. We believe that the improvements in conductivity and toughness obtained after addition of nanotubes can be transferred to other electrode materials, such as silicon nanoparticles.

Love Canal Emergency Declaration Area habitability study. Volume 5. Peer review summary: TRC (Technical Review Committee) responses. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Environmental studies were conducted to provide data that could be used by the Commissioner of Health for the State of New York in determining whether the Emergency Declaration Area surrounding the Love Canal hazardous-waste site is habitable. These volumes (II through IV) were reviewed by a peer-review panel of expert scientists. The scientists concluded that each of the three environmental studies was well planned and well executed. Volume V summarizes the peer review and gives additional information or clarifications as requested during the peer review. Volume V also provides additional supplemental statistical analyses requested by the peer reviewer panel.

Solar Array and Auroral Charging Studies of DMSP Spacecraft

NASA Technical Reports Server (NTRS)

Matias, Kelwin

2013-01-01

The SSJ electrostatic analyzers and the SSIES plasma instruments on the DMSP spacecraft in low Earth polar orbit can be used to conduct case studies of auroral and solar array charging. We will use a program written in the Interactive Data Language (IDL) to evaluate questionable charging events in the SSJ records by comparing charging signatures in SSJ and SSIES data. In addition, we will assemble a number of case studies of solar array charging showing the signatures from the SSJ data and compare to the SSIES charging signatures. In addition we will use Satellite Tool Kit (STK) to propagate orbits, obtain solar intensity, and use to verify onset of charging with sunrise.

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

...? You must meet the following additional BOP testing requirements: (a) Use water to test a surface BOP system; (b) Stump test a subsea BOP system before installation. You must use water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP system; (c) Alternate tests...

Review of Research on Teachers’ Pedagogical Judgments, Plans, and Decisions,

DTIC Science & Technology

1982-11-01

simulation studies; and (3) training studies. Four laboratory and classroom studies have examined the degree to which reading clinicians and classroom teachers...clinicians who diagnosed the same cases. Finally, training teachers to conduct a systematic diagnosis of a reading problem increased the accuracy of their...evidence that training can overcome these inaccuracies to some degree, additional research on teachers’ judgmental processes is needed. Such research

Stimulation Induced Changes in Frog Neuromuscular Junctions: A Quantitative Ultrastructural Comparison of Rapid-Frozen and Chemically Fixed Nerve Terminals

DTIC Science & Technology

1984-03-06

study was conducted to determine the presynaptic morphological changes due to neural activity in rapidly stimulated neuromuscular junctions...Control preparations were unstimulated and preserved either by chemical fixation or rapid-freezing. This study provides evidence that most of the...tissue. The rapid-frozen preparations in the present study showed, in addition, that rapid stimulation produces an increase in synaptic vesicle

A numerical study of three-dimensional diurnal variations within the thermosphere.

NASA Technical Reports Server (NTRS)

Volland, H.; Mayr, H. G.

1973-01-01

A thermosphere model with a realistic temperature profile is assumed. Heat conduction waves are introduced in addition to gravity waves. The temporal and spatial distribution of ion-neutral collisions is taken into account. However, the influence of viscosity waves is neglected. Viscosity-wave effects are simulated by an effective height-dependent collision number. Numerical calculations are conducted of the generation and propagation of two of the most important symmetric tidal waves at thermospheric heights. The influence of the solar EUV-heat upon the generation of the two tidal modes is investigated.

Development of a small-sized generator of ozonated water using an electro-conductive diamond electrode.

PubMed

Sekido, Kota; Kitaori, Noriyuki

2008-12-01

A small-sized generator of ozonated water was developed using an electro-conductive diamond. We studied the optimum conditions for producing ozonated water. As a result, we developed a small-sized generator of ozonated water driven by a dry-cell for use in the average household. This generator was easily able to produce ozonated water with an ozone concentration (over 4 mg/L) sufficient for disinfection. In addition, we verified the high disinfecting performance of the water produced in an actual hospital.

Operations MANDREL and GROMMET Events MINUTE STEAK, DIESEL TRAIN, DIANA MIST, MINT LEAF, HUDSON MOON, DIAGONAL LINE, and MISTY NORTH, 12 September 1969 to 2 May 1972

DTIC Science & Technology

1987-01-30

conducted from 12 September 1969 to 2 May 1972 to study weapons effects . Two were shaft-type and five were tunnel- type nuclear tests. The following table...1958. Of the 194 nuclear device tests conducted, 161 were for weapons related or effects purposes, and 33 were safety ex- periments. An additional 22...States atmospheric testing on 25 April 1962 until the last atmospheric test on 4 November 1962, 40 weapons related and weapons effects tests were

OPERATIONS TOGGLE, ARBOR and BEDROCK Events: DIAMOND SCULLS, DIDO QUEEN, HUSKY ACE, MING BLADE, HYBLA FAIR and DINING CAR, 20 July 1972 - 5 April 1975

DTIC Science & Technology

1987-11-30

1975 to study weapons effects . All six were tunnel-type nuclear tests. The following table summarizes data on these events: OPERATION TOGGLE ARBOR...194 nuclear device tests conducted, 161 were for weapons related or effects purposes, and 33 were safety ex- periments. An additional 22 nuclear...on 25 April 1962 until the last atmospheric test on 4 November 1962, 40 weapons development and weapons effects tests were conducted as part of

Additional pest surveyed: hickory decline

Treesearch

Jennifer Juzwik; Ji-Hyun Park

2011-01-01

A five year investigation of the cause of rapid crown decline and mortality of bitternut hickory was concluded in September 2011. Results of a series of related studies found that multiple cankers and xylem (the water conducting tissue) dysfunction caused by Ceratocystis smalleyi are correlated with rapid crown decline typical of a limited vascular...

Antimicrobial Exposure Assessment Task Force II (AEATF II) Volume 5: Governing Document for a Multi-Year Antimicrobial Chemical Exposure Monitoring Program (interim draft document)

EPA Pesticide Factsheets

Describes the overall scope of the AEATF II program, demonstrates the need for additional human exposure monitoring data and explains the proposed methodology for the exposure monitoring studies proposed for conduct by the AEATF II.

The Effects of Attention Problems on Depression: Developmental, Academic, and Cognitive Pathways

ERIC Educational Resources Information Center

Herman, Keith C.; Ostrander, Rick

2007-01-01

The present study investigated developmental pathways between inattention and depression, particularly the roles of school maladjustment and child cognitions. Additionally, a measure of conduct problems was included in all analyses to test competing theories about the emergence of depressive symptoms. Results supported the hypothesized path models…

Rumen fermentation and production effects of Origanum vulgare L. leaves in lactating dairy cows

USDA-ARS?s Scientific Manuscript database

A lactating cow trial was conducted to study the effects of dietary addition of oregano leaf material (Origanum vulgare L.; 0, control vs. 500 g/d, OV) on ruminal fermentation, methane production, total tract digestibility, manure gas emissions, N metabolism, organoleptic characteristics of milk, an...

9 CFR 112.7 - Special additional requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 112.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... immunity studies conducted as prescribed in § 113.209, paragraph (b) or (c), or both. (d) In the case of a... dose 1 year later. (6) Subsequent revaccination as determined from the results of duration of immunity...

9 CFR 112.7 - Special additional requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 112.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... immunity studies conducted as prescribed in § 113.209, paragraph (b) or (c), or both. (d) In the case of a... dose 1 year later. (6) Subsequent revaccination as determined from the results of duration of immunity...

9 CFR 112.7 - Special additional requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Section 112.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... immunity studies conducted as prescribed in § 113.209, paragraph (b) or (c), or both. (d) In the case of a... dose 1 year later. (6) Subsequent revaccination as determined from the results of duration of immunity...

9 CFR 112.7 - Special additional requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 112.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... immunity studies conducted as prescribed in § 113.209, paragraph (b) or (c), or both. (d) In the case of a... dose 1 year later. (6) Subsequent revaccination as determined from the results of duration of immunity...

HIGH SCHOOL STUDENTS WHO LATER BECAME SCHIZOPHRENIC.

ERIC Educational Resources Information Center

BOWER, ELI M.; AND OTHERS

THE STUDY IDENTIFIED A GROUP OF 44 INSTITUTIONALIZED MALE SCHIZOPHRENIC PATIENTS AGED 19 TO 26 AND SURVEYED DESCRIPTIONS OF THEIR HIGH SCHOOL BEHAVIOR FOR PREDICTIVE SYMPTOMS. INTERVIEWS USING AN 18-ITEM BEHAVIOR RATING FORM WERE CONDUCTED WITH THE PATIENTS' FORMER HIGH SCHOOL TEACHERS. CONTROL SUBJECTS WERE ALSO RATED. ADDITIONAL DATA WERE…

Materialistic Values among Chinese Adolescents: Effects of Parental Rejection and Self-Esteem

ERIC Educational Resources Information Center

Fu, Xinyuan; Kou, Yu; Yang, Ying

2015-01-01

Background: Materialistic values among today's adolescents have been a concern around the world, yet few studies concerning Chinese adolescents' materialistic values have been conducted. Additionally, the joint effects of parental rejection and self-esteem on materialistic values remain unclear. Objective: We examined materialistic values in a…

Presidential Leadership during Strategic Transition: A Case Study of Two Christian Institutions of Higher Education

ERIC Educational Resources Information Center

Searcy, Douglas Neil

2010-01-01

This qualitative research addressed presidential leadership during the strategic transition of the respective Boards of Trustees at Gardner-Webb and Wingate Universities (private, Christian institutions in North Carolina). In addition to interviewing each institutional President, personal 60-minute interviews were conducted with selected faculty…

Non-destructive evaluation techniques, high temperature ceramic component parts for gas turbines

NASA Technical Reports Server (NTRS)

Reiter, H.; Hirsekorn, S.; Lottermoser, J.; Goebbels, K.

1984-01-01

This report concerns studies conducted on various tests undertaken on material without destroying the material. Tests included: microradiographic techniques, vibration analysis, high-frequency ultrasonic tests with the addition of evaluation of defects and structure through analysis of ultrasonic scattering data, microwave tests and analysis of sound emission.

Valuing Teacher Perceptions Related to the Principalship

ERIC Educational Resources Information Center

Williams, Jermaine

2016-01-01

This dissertation served to answer the over-arching research question: How do stakeholders describe effective leadership? In addition, two sub-questions were answered: 1) what dimensions do teachers use to describe effective principal leadership, and 2) why do teachers identify those dimensions as relevant? This study was conducted in a Northern…

Mammals

Treesearch

Marshall White; Reginald H. Barrett; Allan S. Boss; Thomas F. Newman; Thomas J. Rahn; Daniel F. Williams

1980-01-01

This chapter offers information on the status, distribution by habitat, and basic life history of 94 species of mammals inhabiting the western Sierra Nevada. These data were drawn primarily from the literature, much of which consists of reports of studies conducted in areas outside of the Sierra Nevada. Additional information was provided by the field experience of the...

Variations in Conflictual Family Issues by Adolescent Pubertal Status, Gender, and Family Member.

ERIC Educational Resources Information Center

Papini, Dennis R.

Conflictual family issues appearing during adolescence have not been adequately dimensionalized. In addition to this problem, researchers have focused on age-related variations in family conflicts without investigating other characteristics. A study was conducted to describe organized domains of conflictual family issues and to describe variations…

Use of supplemental cementitious materials for optimum resistance of concrete to chloride penetration.

DOT National Transportation Integrated Search

1989-01-01

This study was conducted to determine whether significant improvements could be achieved in the resistance to the penetration by chloride ions of concretes with fly ash or slag by the addition of silica fume with either Type II or Type III cement and...

Episodic Impacts from California Wildfires Identified in Las Vegas Near-Road Air Quality Monitoring

EPA Science Inventory

Air pollutant concentrations near major highways are usually attributed to a combination of nearby traffic emissions and regional background, and generally presumed to be additive in nature. During a recent year-long near-road monitoring study conducted in Las Vegas, NV, a substa...

Li/Ag 2VO 2PO 4 batteries: the roles of composite electrode constituents on electrochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bock, David C.; Bruck, Andrea M.; Pelliccione, Christopher J.

2016-11-01

Silver vanadium phosphorous oxide, Ag 2V 2OPO 4, was used as a model system to systematically study the impact on the constituents of a composite electrode, including polymeric and conductive additives, on electrochemistry. Three different electrode compositions were investigated.

Nursing Graduate Follow-Up, Catonsville Community College.

ERIC Educational Resources Information Center

Catonsville Community Coll., MD. Office of Institutional Research.

In 1989, a study was conducted at Catonsville Community College (CCC) to determine the post-graduation experiences and attitudes of the students who had graduated from the nursing program between June 1987 and December 1988. Of the 113 graduates surveyed, 24 responded to the questionnaire. In addition, 10 employers returned questionnaires…

Laboratory freeze-thaw durability of previous concrete with respect to curing time and addition of sand, slag, silica fume, and saltguard.

DOT National Transportation Integrated Search

2016-11-22

Concerns persist regarding pervious concrete durability in cold climates related to freeze-thaw and exposure to salt. This study was conducted as an extension to previous work regarding pervious concrete in Vermont, to further investigate freeze-thaw...

Laboratory freeze-thaw durability of pervious concrete with respect to curing time and addition of sand, slag, silica fume, and saltguard.

DOT National Transportation Integrated Search

2016-11-22

Concerns persist regarding pervious concrete durability in cold climates related to freeze-thaw : and exposure to salt. This study was conducted as an extension to previous work regarding pervious : concrete in Vermont, to further investigate freeze-...

Marshall properties of asphalt concrete using crumb rubber modified of motorcycle tire waste

NASA Astrophysics Data System (ADS)

Siswanto, Henri; Supriyanto, Bambang; Pranoto, Chandra, Pria Rizky; Hakim, Arief Rahman

2017-09-01

The aim of this study is to explain the effect of Crumb Rubber Modified (CRM) of motorcycle tire waste on Marshall properties of asphalt mix. Two types of aggregate gradation, asphalt concrete wearing course (ACWC) and asphalt concrete base (ACB), and CRM passing #50 sieve size were used. Seven levels of CRM content were investigated in this study, namely 0%, 0.5%, 1%, 1.5%, 3%, 4.5%, and 6% by weight of aggregate. Marshall test is conducted on Marshall specimens. The specimens are tested in their optimum binder content (OBC). The results indicate that CRM addition of motorcycle tire waste increases the Marshall stability of the both mix, ACWC and ACB. In addition, 1% CRM addition of motorcycle tire waste of the total mix weight is the best mix.

Conductivity and electrochemical performance of LiFePO4 slurry in the lithium slurry battery

NASA Astrophysics Data System (ADS)

Feng, Caimei; Chen, Yongchong; Liu, Dandan; Zhang, Ping

2017-06-01

Lithium slurry battery is a new type of energy storage technique which uses the slurry of solid active materials, conductive additions and liquid electrolyte as the electrode. The proportion of conductive addition and the active material has significant influence on the conductivity and electrochemical performance of the slurry electrode. In the present work, slurries with different volume ratios of LiFePO4 (LFP) and Ketjenblack (KB) were investigated by the electrochemical workstation and charge-discharge testing system (vs. Li/Li+). Results show that the conductivity of the slurry increases linearly with the addition of KB, and the measured specific capacity of the slurry reaches its theoretical value when the volume ratio of KB to LFP is around 0.2. Based on this ratio, a slurry battery with higher loading of LFP (19.1 wt.% in the slurry) was tested, and a specific capacity of 165 mAh/g at 0.2 mA/cm2 and 102 mAh/g at 5 mA/cm2 was obtained for LFP.

Effect of Poly(Vinyl Alcohol) Addition on the Properties of Hydrothermal Derived Calcium Phosphate Cement for Bone Filling Materials

NASA Astrophysics Data System (ADS)

Razali, N. N.; Sopyan, I.; Mel, M.; Salleh, H. M.; Rahman, M. M.; Singh, R.

2017-06-01

The effect of addition of poly(vinyl alcohol) on hydrothermal derived calcium phosphate cement has been studied. The precursors used to prepare the cement were calcium oxide (CaO) and ammonium dihydrogen phosphate (NH4H2PO4); the reaction was conducted in water at 80-100°C. To improve properties of CPC, poly(vinyl alcohol) (PVA) of 1wt% and 2wt% was added to the liquid phase of CPC and the results were compared to CPC without PVA addition. The addition of PVA was proved to bring remarkable effects on cohesion, setting time and mechanical strength of CPC which make it suitable physically for injectable bone filler applications.

Enhancing struvite precipitation potential for ammonia nitrogen removal in municipal landfill leachate.

PubMed

Kim, Daekeun; Ryu, Hong-Duck; Kim, Man-Soo; Kim, Jinhyeong; Lee, Sang-Ill

2007-07-19

This study was conducted to improve struvite precipitation for NH4-N removal purpose in landfill leachate. For this purpose, we evaluated the effect of the feeding sequence of precipitating reagents (magnesium, orthophosphate, and buffering reagent) on NH4-N removal by forming struvite deposits. Struvite precipitation effectively proceeded by an addition of excess magnesium and phosphate sources followed by an addition of the buffering reagent, in which condition the local formation of inappropriate deposits or the contamination of the desired struvite was minimized. We also tested the effect of struvite addition as the seeding materials on NH4-N removal. Seed addition would increase the potential for the struvite crystal growth, which enhanced NH4-N removal performance in landfill leachate treatment.

Studies of morphological instability and defect formation in heteroepitaxial Si(1-x)Ge(x) thin films via controlled annealing experiments

NASA Astrophysics Data System (ADS)

Ozkan, Cengiz Sinan

Strained layer semiconductor structures provide possibilities for novel electronic devices. When a semiconductor layer is deposited epitaxially onto a single crystal substrate with the same structure but a slightly different lattice parameter, the semiconductor layer grows commensurately with a misfit strain that can be accommodated elastically below a critical thickness. When the critical thickness is exceeded, the elastic strain energy builds up to a point where it becomes energetically favorable to form misfit dislocations. In addition, in the absence of a capping layer, Sisb{1-x}Gesb{x} films exhibit surface roughening via surface diffusion under the effect of a compressive stress which is caused by a lattice mismatch. Surface roughening takes place in the form of ridges aligned along {<}100{>} or {<}110{>} directions depending on the film thickness and the rate of strain relief. Recent work has shown that surface roughening makes a very significant contribution to strain relaxation in heteroepitaxial thin films. At sharp valley regions on the surface, amplified local stresses can cause further defect nucleation and propagation, such as stacking faults and 90sp° dislocations. In addition, capping layers with suitable thickness will surpress surface roughening and keep most of the strain in the film. We study surface roughening and defect formation by conducting controlled annealing experiments on initially flat and defect free films grown by LPCVD in a hydrogen ambient. We study films with both subcritical and supercritical thicknesses. In addition, we compare the relaxation behaviour of capped and uncapped films where surface roughening was inhibited in films with a capping layer. TEM and AFM studies were conducted to study the morphology and microstructure of these films. X-ray diffraction measurements were made to determine the amount of strain relaxation in these films. Further studies of surface roughening on heteroepitaxial films under a positive biaxial stress have shown that, morphological evolution occurs regardless of the sign of stress in the film. Finally, we have studied surface roughening processes in real time by conducting in-situ TEM experiments. We have observed that the kinetics of roughening depend strongly on the annealing ambient.

Developing novel 3D antennas using advanced additive manufacturing technology

NASA Astrophysics Data System (ADS)

Mirzaee, Milad

In today's world of wireless communication systems, antenna engineering is rapidly advancing as the wireless services continue to expand in support of emerging commercial applications. Antennas play a key role in the performance of advanced transceiver systems where they serve to convert electric power to electromagnetic waves and vice versa. Researchers have held significant interest in developing this crucial component for wireless communication systems by employing a variety of design techniques. In the past few years, demands for electrically small antennas continues to increase, particularly among portable and mobile wireless devices, medical electronics and aerospace systems. This trend toward smaller electronic devices makes the three dimensional (3D) antennas very appealing, since they can be designed in a way to use every available space inside the devise. Additive Manufacturing (AM) method could help to find great solutions for the antennas design for next generation of wireless communication systems. In this thesis, the design and fabrication of 3D printed antennas using AM technology is studied. To demonstrate this application of AM, different types of antennas structures have been designed and fabricated using various manufacturing processes. This thesis studies, for the first time, embedded conductive 3D printed antennas using PolyLactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for substrate parts and high temperature carbon paste for conductive parts which can be a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new generation of 3D printed antennas.

Evaluation of the Thermo Scientific SureTect Listeria species assay. AOAC Performance Tested Method 071304.

PubMed

Cloke, Jonathan; Evans, Katharine; Crabtree, David; Hughes, Annette; Simpson, Helen; Holopainen, Jani; Wickstrand, Nina; Kauppinen, Mikko; Leon-Velarde, Carlos; Larson, Nathan; Dave, Keron

2014-01-01

The Thermo Scientific SureTect Listeria species Assay is a new real-time PCR assay for the detection of all species of Listeria in food and environmental samples. This validation study was conducted using the AOAC Research Institute (RI) Performance Tested Methods program to validate the SureTect Listeria species Assay in comparison to the reference method detailed in International Organization for Standardization 11290-1:1996 including amendment 1:2004 in a variety of foods plus plastic and stainless steel. The food matrixes validated were smoked salmon, processed cheese, fresh bagged spinach, cantaloupe, cooked prawns, cooked sliced turkey meat, cooked sliced ham, salami, pork frankfurters, and raw ground beef. All matrixes were tested by Thermo Fisher Scientific, Microbiology Division, Basingstoke, UK. In addition, three matrixes (pork frankfurters, fresh bagged spinach, and stainless steel surface samples) were analyzed independently as part of the AOAC-RI-controlled independent laboratory study by the University ofGuelph, Canada. Using probability of detection statistical analysis, a significant difference in favour of the SureTect assay was demonstrated between the SureTect and reference method for high level spiked samples of pork frankfurters, smoked salmon, cooked prawns, stainless steel, and low-spiked samples of salami. For all other matrixes, no significant difference was seen between the two methods during the study. Inclusivity testing was conducted with 68 different isolates of Listeria species, all of which were detected by the SureTect Listeria species Assay. None of the 33 exclusivity isolates were detected by the SureTect Listeria species Assay. Ruggedness testing was conducted to evaluate the performance of the assay with specific method deviations outside of the recommended parameters open to variation, which demonstrated that the assay gave reliable performance. Accelerated stability testing was additionally conducted, validating the assay shelf life.

Evaluation of the Thermo Scientific™ SureTect™ Listeria species Assay.

PubMed

Cloke, Jonathan; Evans, Katharine; Crabtree, David; Hughes, Annette; Simpson, Helen; Holopainen, Jani; Wickstrand, Nina; Kauppinen, Mikko

2014-03-01

The Thermo Scientific™ SureTect™ Listeria species Assay is a new real-time PCR assay for the detection of all species of Listeria in food and environmental samples. This validation study was conducted using the AOAC Research Institute (RI) Performance Tested MethodsSM program to validate the SureTect Listeria species Assay in comparison to the reference method detailed in International Organization for Standardization 11290-1:1996 including amendment 1:2004 in a variety of foods plus plastic and stainless steel. The food matrixes validated were smoked salmon, processed cheese, fresh bagged spinach, cantaloupe, cooked prawns, cooked sliced turkey meat, cooked sliced ham, salami, pork frankfurters, and raw ground beef. All matrixes were tested by Thermo Fisher Scientific, Microbiology Division, Basingstoke, UK. In addition, three matrixes (pork frankfurters, fresh bagged spinach, and stainless steel surface samples) were analyzed independently as part of the AOAC-RI-controlled independent laboratory study by the University of Guelph, Canada. Using probability of detection statistical analysis, a significant difference in favour of the SureTect assay was demonstrated between the SureTect and reference method for high level spiked samples of pork frankfurters, smoked salmon, cooked prawns, stainless steel, and low-spiked samples of salami. For all other matrixes, no significant difference was seen between the two methods during the study. Inclusivity testing was conducted with 68 different isolates of Listeria species, all of which were detected by the SureTect Listeria species Assay. None of the 33 exclusivity isolates were detected by the SureTect Listeria species Assay. Ruggedness testing was conducted to evaluate the performance of the assay with specific method deviations outside of the recommended parameters open to variation, which demonstrated that the assay gave reliable performance. Accelerated stability testing was additionally conducted, validating the assay shelf life.

Estimation on the self recovery behavior of low-conductivity layer in landfill final cover by laboratory conductivity tests.

PubMed

Kwon, O; Park, J

2006-11-01

This study examined the application of a Self Recovering Sustainable Layer (SRSL) as a landfill final cover. Low-conductivity layers in landfill covers are known to have problems associated with cracking as a result of the differential settlement or climatic changes. A SRSL is defined as a layer with chemical properties that reduces the increased hydraulic conductivity resulting from cracking by forming low-conductivity precipitates of chemicals contained in the layer. In this study, the formation of precipitates was confirmed using a batch test, spectroscopic analysis and mineralogical speciation tests. The possibility of secondary contamination due to the chemicals used for recovery was evaluated using a leaching test. A laboratory conductivity test was performed on a single layer composed of each chemical as well as on a 2-layer system. The recovery performance of the SRSL was estimated by developing artificial cracks in the specimens and observing the change in hydraulic conductivity as a function of time. In the laboratory conductivity test, the hydraulic conductivity of a 2-layer system as well as those of the individual layers that comprise the 2-layer system was estimated. In addition sodium ash was found to enhance the reduction in conductivity. A significant increase in conductivity was observed after the cracks developed but this was reduced with time, which indicated that the SRSL has a proper recovering performance. In conclusion, a SRSL can be used as a landfill final cover that could maintain low-conductivity even after the serious damages due to settlement.

Mixed conductivity, structural and microstructural characterization of titania-doped yttria tetragonal zirconia polycrystalline/titania-doped yttria stabilized zirconia composite anode matrices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colomer, M.T., E-mail: tcolomer@icv.csic.e; Maczka, M.

2011-02-15

Taking advantage of the fact that TiO{sub 2} additions to 8YSZ cause not only the formation of a titania-doped YSZ solid solution but also a titania-doped YTZP solid solution, composite materials based on both solutions were prepared by solid state reaction. In particular, additions of 15 mol% of TiO{sub 2} give rise to composite materials constituted by 0.51 mol fraction titania-doped yttria tetragonal zirconia polycrystalline and 0.49 mol fraction titania-doped yttria stabilized zirconia (0.51TiYTZP/0.49TiYSZ). Furthermore, Y{sub 2}(Ti{sub 1-y}Zr{sub y}){sub 2}O{sub 7} pyrochlore is present as an impurity phase with y close to 1, according to FT-Raman results. Lower and highermore » additions of titania than that of 15 mol%, i.e., x=0, 5, 10, 20, 25 and 30 mol% were considered to study the evolution of 8YSZ phase as a function of the TiO{sub 2} content. Furthermore, zirconium titanate phase (ZrTiO{sub 4}) is detected when the titania content is equal or higher than 20 mol% and this phase admits Y{sub 2}O{sub 3} in solid solution according to FE-SEM-EDX. The 0.51TiYTZP/0.49TiYSZ duplex material was selected in this study to establish the mechanism of its electronic conduction under low oxygen partial pressures. In the pO{sub 2} range from 0.21 to 10{sup -7.5} atm. the conductivity is predominantly ionic and constant over the range and its value is 0.01 S/cm. The ionic plus electronic conductivity is 0.02 S/cm at 1000 {sup o}C and 10{sup -12.3} atm. Furthermore, the onset of electronic conductivity under reducing conditions exhibits a -1/4 pO{sub 2} dependence. Therefore, it is concluded that the n-type electronic conduction in the duplex material can be due to a small polaron-hopping between Ti{sup 3+} and Ti{sup 4+}. -- Graphical abstract: FE-SEM micrograph of a polished and thermal etched surface of a Ti-doped YTZP/Ti-doped YSZ composite material. Display Omitted Research highlights: {yields} Ti-doped YTZP/Ti-doped YSZ composite materials are mixed conductors under low partial pressures. {yields} From 5 mol% of TiO{sub 2}, Y{sub 2}(Ti{sub 1-y},Zr{sub y}){sub 2}O{sub 7} pyrochlore is present as a minor phase, being y close to 1 according to FT-Raman studies. {yields} The onset of the electronic conductivity under reducing conditions exhibit a -1/4 pO{sub 2} dependence. The n-type electronic conduction is due to a small polaron-hopping between Ti{sup 3+} and Ti{sup 4+}.« less

Supersonic jet shock noise reduction

NASA Technical Reports Server (NTRS)

Stone, J. R.

1984-01-01

Shock-cell noise is identified to be a potentially significant problem for advanced supersonic aircraft at takeoff. Therefore NASA conducted fundamental studies of the phenomena involved and model-scale experiments aimed at developing means of noise reduction. The results of a series of studies conducted to determine means by which supersonic jet shock noise can be reduced to acceptable levels for advanced supersonic cruise aircraft are reviewed. Theoretical studies were conducted on the shock associated noise of supersonic jets from convergent-divergent (C-D) nozzles. Laboratory studies were conducted on the influence of narrowband shock screech on broadband noise and on means of screech reduction. The usefulness of C-D nozzle passages was investigated at model scale for single-stream and dual-stream nozzles. The effect of off-design pressure ratio was determined under static and simulated flight conditions for jet temperatures up to 960 K. Annular and coannular flow passages with center plugs and multi-element suppressor nozzles were evaluated, and the effect of plug tip geometry was established. In addition to the far-field acoustic data, mean and turbulent velocity distributions were measured with a laser velocimeter, and shadowgraph images of the flow field were obtained.

Very early predictors of conduct problems and crime: results from a national cohort study.

PubMed

Murray, Joseph; Irving, Barrie; Farrington, David P; Colman, Ian; Bloxsom, Claire A J

2010-11-01

  Longitudinal research has produced a wealth of knowledge about individual, family, and social predictors of crime. However, nearly all studies have started after children are age 5, and little is known about earlier risk factors. The 1970 British Cohort Study is a prospective population survey of more than 16,000 children born in 1970. Pregnancy, birth, child, parent, and socioeconomic characteristics were measured from medical records, parent interviews, and child assessments at birth and age 5. Conduct problems were reported by parents at age 10, and criminal convictions were self-reported by study members at ages 30-34.   Early (up to age 5) psychosocial risk factors were strong predictors of conduct problems and criminal conviction. Among pregnancy and birth measures, only prenatal maternal smoking was strongly predictive. Risk factors were similar for girls and boys. Additive risk scores predicted antisocial behaviour quite strongly.   Risk factors from pregnancy to age 5 are quite strong predictors of conduct problems and crime. New risk assessment tools could be developed to identify young children at high risk for later antisocial behaviour. © 2010 The Authors. Journal of Child Psychology and Psychiatry © 2010 Association for Child and Adolescent Mental Health.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors.

PubMed

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B

2016-12-08

There is a great need for viable alternatives to today's transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 10 7  Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn't need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors

NASA Astrophysics Data System (ADS)

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B.

2016-12-01

There is a great need for viable alternatives to today’s transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 107 Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn’t need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films.

Totally embedded hybrid thin films of carbon nanotubes and silver nanowires as flat homogenous flexible transparent conductors

PubMed Central

Pillai, Suresh Kumar Raman; Wang, Jing; Wang, Yilei; Sk, Md Moniruzzaman; Prakoso, Ari Bimo; Rusli; Chan-Park, Mary B.

2016-01-01

There is a great need for viable alternatives to today’s transparent conductive film using largely indium tin oxide. We report the fabrication of a new type of flexible transparent conductive film using silver nanowires (AgNW) and single-walled carbon nanotube (SWCNT) networks which are fully embedded in a UV curable resin substrate. The hybrid SWCNTs-AgNWs film is relatively flat so that the RMS roughness of the top surface of the film is 3 nm. Addition of SWCNTs networks make the film resistance uniform; without SWCNTs, sheet resistance of the surface composed of just AgNWs in resin varies from 20 Ω/sq to 107 Ω/sq. With addition of SWCNTs embedded in the resin, sheet resistance of the hybrid film is 29 ± 5 Ω/sq and uniform across the 47 mm diameter film discs; further, the optimized film has 85% transparency. Our lamination-transfer UV process doesn’t need solvent for sacrificial substrate removal and leads to good mechanical interlocking of the nano-material networks. Additionally, electrochemical study of the film for supercapacitors application showed an impressive 10 times higher current in cyclic voltammograms compared to the control without SWCNTs. Our fabrication method is simple, cost effective and enables the large-scale fabrication of flat and flexible transparent conductive films. PMID:27929125

A model to predict thermal conductivity of irradiated U-Mo dispersion fuel

NASA Astrophysics Data System (ADS)

Burkes, Douglas E.; Huber, Tanja K.; Casella, Andrew M.

2016-05-01

Numerous global programs are focused on the continued development of existing and new research and test reactor fuels to achieve maximum attainable uranium loadings to support the conversion of a number of the world's remaining high-enriched uranium fueled reactors to low-enriched uranium fuel. Some of these programs are focused on assisting with the development and qualification of a fuel design that consists of a uranium-molybdenum (U-Mo) alloy dispersed in an aluminum matrix as one option for reactor conversion. Thermal conductivity is an important consideration in determining the operational temperature of the fuel and can be influenced by interaction layer formation between the dispersed phase and matrix and upon the concentration of the dispersed phase within the matrix. This paper extends the use of a simple model developed previously to study the influence of interaction layer formation as well as the size and volume fraction of fuel particles dispersed in the matrix, Si additions to the matrix, and Mo concentration in the fuel particles on the effective thermal conductivity of the U-Mo/Al composite during irradiation. The model has been compared to experimental measurements recently conducted on U-Mo/Al dispersion fuels at two different fission densities with acceptable agreement. Observations of the modeled results indicate that formation of an interaction layer and subsequent consumption of the matrix reveals a rather significant effect on effective thermal conductivity. The modeled interaction layer formation and subsequent consumption of the high thermal conductivity matrix was sensitive to the average dispersed fuel particle size, suggesting this parameter as one of the most effective in minimizing thermal conductivity degradation of the composite, while the influence of Si additions to the matrix in the model was highly dependent upon irradiation conditions.

A model to predict thermal conductivity of irradiated U–Mo dispersion fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burkes, Douglas E.; Huber, Tanja K.; Casella, Andrew M.

The Office of Materials Management and Minimization Reactor Conversion Program continues to develop existing and new research and test reactor fuels to achieve maximum attainable uranium loadings to support the conversion of a number of the world’s remaining high-enriched uranium fueled reactors to low-enriched uranium fuel. The program is focused on assisting with the development and qualification of a fuel design that consists of a uranium-molybdenum (U-Mo) alloy dispersed in an aluminum matrix as one option for reactor conversion. Thermal conductivity is an important consideration in determining the operational temperature of the fuel and can be influenced by interaction layermore » formation between the dispersed phase and matrix and upon the concentration of the dispersed phase within the matrix. This paper extends the use of a simple model developed previously to study the influence of interaction layer formation as well as the size and volume fraction of fuel particles dispersed in the matrix, Si additions to the matrix, and Mo concentration in the fuel particles on the effective thermal conductivity of the U-Mo/Al composite during irradiation. The model has been compared to experimental measurements recently conducted on U-Mo/Al dispersion fuels at two different fission densities with acceptable agreement. Observations of the modeled results indicate that formation of an interaction layer and subsequent consumption of the matrix reveals a rather significant effect on effective thermal conductivity. The modeled interaction layer formation and subsequent consumption of the high thermal conductivity matrix was sensitive to the average dispersed fuel particle size, suggesting this parameter as one of the most effective in minimizing thermal conductivity degradation of the composite, while the influence of Si additions to the matrix in the model was highly dependent upon irradiation conditions.« less

Effects of task performance, helping, voice, and organizational loyalty on performance appraisal ratings.

PubMed

Whiting, Steven W; Podsakoff, Philip M; Pierce, Jason R

2008-01-01

Despite the fact that several studies have investigated the relationship between organizational citizenship behavior and performance appraisal ratings, the vast majority of these studies have been cross-sectional, correlational investigations conducted in organizational settings that do not allow researchers to establish the causal nature of this relationship. To address this lack of knowledge regarding causality, the authors conducted 2 studies designed to investigate the effects of task performance, helping behavior, voice, and organizational loyalty on performance appraisal evaluations. Findings demonstrated that each of these forms of behavior has significant effects on performance evaluation decisions and suggest that additional attention should be directed at both voice and organizational loyalty as important forms of citizenship behavior aimed at the organization. 2008 APA

An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery

NASA Astrophysics Data System (ADS)

Saravanan, M.; Ganesan, M.; Ambalavanan, S.

2014-04-01

In this work, we report an in situ generated carbon from sugar as additive in the Negative Active Mass (NAM) which enhances the charge-discharge characteristics of the lead-acid cells. In situ formed sugar derived carbon (SDC) with leady oxide (LO) provides a conductive network and excellent protection against NAM irreversible lead sulfation. The effect of SDC and carbon black (CB) added negative plates are characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), galvanostatic charge-discharge, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. The results show that subtle changes in the addition of carbon to NAM led to subsequent changes on the performance during partial-state-of-charge (PSoC) operations in lead-acid cells. Furthermore, SDC added cells exhibit remarkable improvement in the rate capability, active material utilization, cycle performance and charge acceptance compared to that of the conventional CB added cells. The impact of SDC with LO at various synthesis conditions on the electrochemical performance of the negative plate is studied systematically.

Advanced Proton Conducting Polymer Electrolytes for Electrochemical Capacitors

NASA Astrophysics Data System (ADS)

Gao, Han

Research on solid electrochemical energy storage devices aims to provide high performance, low cost, and safe operation solutions for emerging applications from flexible consumer electronics to microelectronics. Polymer electrolytes, minimizing device sealing and liquid electrolyte leakage, are key enablers for these next-generation technologies. In this thesis, a novel proton-conducing polymer electrolyte system has been developed using heteropolyacids (HPAs) and polyvinyl alcohol for electrochemical capacitors. A thorough understanding of proton conduction mechanisms of HPAs together with the interactions among HPAs, additives, and polymer framework has been developed. Structure and chemical bonding of the electrolytes have been studied extensively to identify and elucidate key attributes affecting the electrolyte properties. Numerical models describing the proton conduction mechanism have been applied to differentiate those attributes. The performance optimization of the polymer electrolytes through additives, polymer structural modifications, and synthesis of alternative HPAs has achieved several important milestones, including: (a) high proton mobility and proton density; (b) good ion accessibility at electrode/electrolyte interface; (c) wide electrochemical stability window; and (d) good environmental stability. Specifically, high proton mobility has been addressed by cross-linking the polymer framework to improve the water storage capability at normal-to-high humidity conditions (e.g. 50-80% RH) as well as by incorporating nano-fillers to enhance the water retention at normal humidity levels (e.g. 30-60% RH). High proton density has been reached by utilizing additional proton donors (i.e. acidic plasticizers) and by developing different HPAs. Good ion accessibility has been achieved through addition of plasticizers. Electrochemical stability window of the electrolyte system has also been investigated and expanded by utilizing HPAs with different heteroatoms. The optimized polymer electrolyte demonstrated even higher proton conductivity than pure HPAs and the enabled electrochemical capacitors have demonstrated an exceptionally high rate capability of 50 Vs-1 in cyclic voltammograms and a 10 ms time constant in impedance analyses.

An experimental study on PEO polymer electrolyte based all-solid-state supercapacitor

NASA Astrophysics Data System (ADS)

Yijing, Yin

Supercapacitors are one of the most important electrochemical energy storage and conversion devices, however low ionic conductivity of solid state polymer electrolytes and the poor accessibility of the ions to the active sites in the porous electrode will cause low performance for all-solid-state supercapacitors and will limit their application. The objective of the dissertation is to improve the performance of all-solid-state supercapactor by improving electrolyte conductivity and solving accessibility problem of the ions to the active sites. The low ionic conductivity (10-8 S/cm) of poly(ethylene oxide) (PEO) limits its application as an electrolyte. Since PEO is a semicrystal polymer and the ion conduction take place mainly in the amorphous regions of the PEO/Lithium salt complex, improvements in the percentage of amorphous phase in PEO or increasing the charge carrier concentration and mobility could increase the ionic conductivity of PEO electrolyte. Hot pressing along with the additions of different lithium salts, inorganic fillers and plasticizers were applied to improve the ionic conductivity of PEO polymer electrolytes. Four electrode methods were used to evaluate the conductivity of PEO based polymer electrolytes. Results show that adding certain lithium salts, inorganic fillers, and plasticizers could improve the ionic conductivity of PEO electrolytes up 10-4 S/cm. Further hot pressing treatment could improve the ionic conductivity of PEO electrolytes up to 10-3 S/cm. The conductivity improvement after hot pressing treatment is elucidated as that the spherulite crystal phase is convert into the fringed micelle crystal phase or the amorphous phase of PEO electrolytes. PEO electrolytes were added into active carbon as a binder and an ion conductor, so as to provide electrodes with not only ion conduction, but also the accessibility of ion to the active sites of electrodes. The NaI/I 2 mediator was added to improve the conductivity of PEO electrolyte and provide pseudocapacitance for all-solid-state supercapacitors. Impedance, cyclic voltammetry, and gavalnostatic charge/discharge measurements were conducted to evaluate the electrochemical performance of PEO polymer electrolytes based all-solid-state supercapacitors. Results demonstrate that the conductivity of PEO electrolyte could be improved to 0.1 S/cm with a mediator concentration of 50wt%. A high conductivity in the PEO electrolyte with mediator is an indication of a high electron exchange rate between the mediator and mediator. The high electron exchange rates at mediator carbon interface and between mediator and mediator are essential in order to obtain a high response rate and high power. This automatically solves the accessibility problem. With the addition of NaI/I2 mediator, the specific capacitance increased more than 30 folds, specific power increased almost 20 folds, and specific energy increased around 10 folds. Further addition of filler to the electrodes along with the mediator could double the specific capacitor and specific power of the all-solid-state supercapacitor. The stability of the corresponded supercapacitor is good within 2000 cycles.

Enhancement in ionic conductivity on solid polymer electrolytes containing large conducting species

DOE Office of Scientific and Technical Information (OSTI.GOV)

Praveen, D.; Damle, Ramakrishna

2016-05-23

Solid Polymer Electrolytes (SPEs) lack better conducting properties at ambient temperatures. Various methods to enhance their ionic conductivity like irradiation with swift heavy ions, γ-rays, swift electrons and quenching at low temperature etc., have been explored in the literature. Among these, one of the oldest methods is incorporation of different conducting species into the polymer matrix and/or addition of nano-sized inert particles into SPEs. Various new salts like LiBr, Mg(ClO{sub 4}){sub 2}, NH{sub 4}I etc., have already been tried in the past with some success. Also various nanoparticles like Al{sub 2}O{sub 3}, TiO{sub 2} etc., have been tried in themore » past. In this article, we have investigated an SPE containing Rubidium as a conducting species. Rubidium has a larger ionic size compared to lithium and sodium ions which have been investigated in the recent past. In the present article, we have investigated the conductivity of large sized conducting species and shown the enhancement in the ionic conductivity by addition of nano-sized inert particles.« less

Spatial and temporal variability in the structure of invertebrate assemblages in control stream mesocosms.

PubMed

Wong, Diana C L; Maltby, Lorraine; Whittle, Don; Warren, Philip; Dorn, Philip B

2004-01-01

Outdoor stream mesocosm studies conducted between 1992 and 1996 at two facilities enabled the investigation of structural variability in invertebrate assemblages within and between studies. Temporal variability of benthic invertebrate assemblages between eight replicate streams within a study was assessed in a 28-day mesocosm study without chemical treatment. Cluster analysis, non-metric multidimensional scaling, and principal component analysis each showed the untreated assemblages as structurally distinct groups on the three sampling days. The assemblages between the eight replicate streams showed >88% Bray-Curtis similarity at any one time during the study. In addition, pre-treatment data from a series of four studies conducted at one facility were used to examine structural variability in the starting benthic invertebrate assemblages between studies. Invertebrate assemblages were structurally distinct at the start of each mesocosm study conducted in different years at the same facility and the taxa responsible for differences in the assemblages were also different each year. The implications of temporal and spatial variability in benthic invertebrate assemblages within and between mesocosm studies with regards to species sensitivity and study repeatability should be considered when results of such studies are used in risk assessment.

Techniques for Measuring Solubility and Electrical Conductivity in Molten Salts

NASA Astrophysics Data System (ADS)

Su, Shizhao; Villalon, Thomas; Pal, Uday; Powell, Adam

Eutectic MgF2-CaF2 based salt containing YF3, CaO and Al2O3 additions were used in this study. The electrical conductivity was measured as a function of temperature by a calibration-free coaxial electrode setup. The materials selection and setup design were optimized to accurately measure the electrical conductivity of the highly conductive molten salts (>1 S/cm). The solubility and diffusion behavior of alumina and zirconia in the molten salts were investigated by drawing and holding the molten salt for different lengths of time within capillary tubes made of alumina and zirconia, respectively. After the time-dependent high temperature holds, the samples were cooled and the solubility of the solute within the molten salt was determined using scanning electron microscopy, energy-dispersive X-ray spectroscopy analysis and wavelength-dispersive X-ray spectroscopy analysis.

Usability evaluation of the digital anger thermometer app.

PubMed

Mattson, Donald C

2017-09-01

The digital anger thermometer is a prototype for a mobile application (app) for use with adults in anger management treatment. The digital anger thermometer incorporates standards of software development in addition to anger management resources from the Substance Abuse and Mental Health Services Administration. The digital anger thermometer underwent a usability study conducted by five expert reviewers. The results indicate that it is easy to learn, efficient, and ergonomically sound. However, it does not offer support features or user-error tolerance. The digital anger thermometer prototype requires additional usability studies and comparative research in order for it to become an actual mental health app.

The effect of fish oil supplements on blood pressure.

PubMed Central

Lofgren, R P; Wilt, T J; Nichol, K L; Crespin, L; Pluhar, R; Eckfeldt, J

1993-01-01

We conducted a double-blind, placebo-controlled crossover study to determine the effects of fish oil supplementation on blood pressure in middle-aged men. Subjects were randomly assigned to consume either 20 g of fish oil or safflower oil for 12 weeks and then consume the other oil for an additional 12 weeks after a 4-week washout period. We found no significant changes from the pretreatment value in systolic or diastolic blood pressure with the use of fish oil supplements. In addition, there were no significant differences in the posttreatment blood pressures comparing the fish and safflower oil phases of the study. PMID:8427339

Ethical issues in HIV prevention research with people who inject drugs.

PubMed

Sugarman, Jeremy; Rose, Scott M; Metzger, David

2014-04-01

Injection drug use continues to significantly contribute to new infections with HIV. Moreover, conducting HIV prevention research with people who inject drugs (PWIDs) can be complicated for an array of practical, social, legal, and ethical reasons. It is critical that these research efforts are sensitive to the particular vulnerabilities associated with injection drug use as well as those related to being at risk of acquiring HIV so as to minimize harm to participants in research. To describe how we addressed some of these ethical challenges during the course of a large-scale multinational randomized HIV prevention trial involving PWIDs, which was successfully completed. The ethical issues encountered during the life cycle of the trial were cataloged by the principal investigator, study coordinator, and ethicist working on the trial. Relevant study documents were then reviewed to provide pertinent details. The ethical issues unique to the trial were then described. Before implementation, the trial faced particularly complex challenges related to the vulnerability of PWIDs, where HIV seroincidence rates in the population were high and legal policies and stigma regarding injection drug use was severe. Accordingly, a rapid policy assessment was commissioned, and a series of community engagement activities were conducted. During the trial, in addition to using careful standard operating procedures regarding all aspects of trial conduct and extensive staff training, the trial standardized informed consent procedures and assessed them. Furthermore, social harms were monitored along with physical harms and adverse events. Following the decision to close the study, it was critical to develop an orderly and safe process for closing it. The issue of post-trial access to the study medication and a complex intervention also surfaced for consideration. The issues described in this article are necessarily limited to how they manifested themselves within the context of a particular trial that was conducted in two countries. In addition, other stakeholders may have divergent views on the ethical issues described and may also have identified additional ethical issues that would warrant examination. Adopting similar approaches to addressing ethical issues in future research promises to facilitate this work so that needed strategies to prevent HIV infection among PWIDs can be safely and appropriately tested. Future trials enrolling PWIDs who are at risk of detainment should identify ways of mapping closely their experiences and perceptions in order to better apprehend some of the ethical issues at stake. In addition, scholarly and policy work needs to address the ethical issues related to post-trial access to multi-modal interventions that may be desired by participants, but are not shown to be effective in achieving the primary outcomes of the study.

Magnesium-based methods, systems, and devices

DOEpatents

Zhao, Yufeng; Ban, Chunmei; Ruddy, Daniel; Parilla, Philip A.; Son, Seoung-Bum

2017-12-12

An aspect of the present invention is an electrical device, where the device includes a current collector and a porous active layer electrically connected to the current collector to form an electrode. The porous active layer includes MgB.sub.x particles, where x.gtoreq.1, mixed with a conductive additive and a binder additive to form empty interstitial spaces between the MgB.sub.x particles, the conductive additive, and the binder additive. The MgB.sub.x particles include a plurality of boron sheets of boron atoms covalently bound together, with a plurality of magnesium atoms reversibly intercalated between the boron sheets and ionically bound to the boron atoms.

Polypyrrole/Alginate Hybrid Hydrogels: Electrically Conductive and Soft Biomaterials for Human Mesenchymal Stem Cell Culture and Potential Neural Tissue Engineering Applications.

PubMed

Yang, Sumi; Jang, LindyK; Kim, Semin; Yang, Jongcheol; Yang, Kisuk; Cho, Seung-Woo; Lee, Jae Young

2016-11-01

Electrically conductive biomaterials that can efficiently deliver electrical signals to cells or improve electrical communication among cells have received considerable attention for potential tissue engineering applications. Conductive hydrogels are desirable particularly for neural applications, as they can provide electrical signals and soft microenvironments that can mimic native nerve tissues. In this study, conductive and soft polypyrrole/alginate (PPy/Alg) hydrogels are developed by chemically polymerizing PPy within ionically cross-linked alginate hydrogel networks. The synthesized hydrogels exhibit a Young's modulus of 20-200 kPa. Electrical conductance of the PPy/Alg hydrogels could be enhanced by more than one order of magnitude compared to that of pristine alginate hydrogels. In vitro studies with human bone marrow-derived mesenchymal stem cells (hMSCs) reveal that cell adhesion and growth are promoted on the PPy/Alg hydrogels. Additionally, the PPy/Alg hydrogels support and greatly enhance the expression of neural differentiation markers (i.e., Tuj1 and MAP2) of hMSCs compared to tissue culture plate controls. Subcutaneous implantation of the hydrogels for eight weeks induces mild inflammatory reactions. These soft and conductive hydrogels will serve as a useful platform to study the effects of electrical and mechanical signals on stem cells and/or neural cells and to develop multifunctional neural tissue engineering scaffolds. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fabrication of conductive polymer-based nanofiber scaffolds for tissue engineering applications.

PubMed

Gu, Bon Kang; Kim, Min Sup; Kang, Chang Mo; Kim, Jong-Ll; Park, Sang Jun; Kim, Chun-Ho

2014-10-01

Natural and synthetic polymers, in particular those that are conductive, are of great interest in the field of tissue engineering and the pursuit of biomimetic extracellular matrix (ECM) structures for adhesion, proliferation, and differentiation of cells. In the present study, natural chitin and conductive polyaniline (PANi) blended solutions were electrospun to produce biodegradable and conductive biomimetic nanostructured scaffolds. The chitin/PANi (Chi-PANi) nanofibrous materials were characterized using field emission scanning electron microscopy, Fourier transform-infrared spectroscopy, wettability analysis, mechanical testing, and electrical conductivity measurements using a 4-point probe method. The calculated electrical conductivities of the PANi-containing nanofiber scaffolds significantly increased as the amount of PANi increased, reaching 5.21 ± 0.28 x 10(-3) S/cm for 0.3 wt% content of the conducting polymer. In addition, the viability of human mesenchymal stem cells (hMSCs) cultured on the Chi-PANi nanofiber scaffolds in vitro was found to be excellent. These results suggest that the Chi-PANi nanofiber scaffolds have great potential for use in tissue engineering applications that involve electrical stimulation.

Inter-Hemispheric Comparisons of the Ground Magnetic Response to an Interplanetary Shock

NASA Astrophysics Data System (ADS)

Hartinger, M.; Xu, Z.; Clauer, C. R.; Yu, Y.; Weimer, D. R.; Kim, H.; Pilipenko, V.; Welling, D. T.; Behlke, R.; Willer, A. N.

2016-12-01

Models predict that hemispheric differences in ionospheric conductivity affect the high-latitude ground magnetic response during interplanetary shock events. Using ground magnetometer observations from dense north-south chains in both the Northern (Greenland) and Southern (East Antarctic Plateau) hemispheres, we show an event study where that is not the case: nearly the same magnetic response is observed in both hemispheres, despite near-solstice conditions when hemispheric conductivity differences should be large. We compare observations to virtual ground magnetometer output from global magnetohydrodynamic (MHD) simulations with the same driving conditions but different ionospheric conductivity profiles: (1) uniform conductivity, (2) variable conductivity appropriate for solar illumination during solstice, (3) the same as 2 but with additional conductivity contributions from auroral precipitation. There are major quantitative differences between simulations, with simulation 3 exhibiting the best agreement with data. Our results demonstrate the importance of constraining ionospheric conductivity - especially contributions from auroral precipitation - before interpreting hemispheric differences in ground magnetic perturbation amplitude. We discuss the application of these results to techniques that relate high-latitude ground magnetometer observations to current or voltage generators.

Local measurement of thermal conductivity and diffusivity.

PubMed

Hurley, David H; Schley, Robert S; Khafizov, Marat; Wendt, Brycen L

2015-12-01

Simultaneous measurement of local thermal diffusivity and conductivity is demonstrated on a range of ceramic samples. This was accomplished by measuring the temperature field spatial profile of samples excited by an amplitude modulated continuous wave laser beam. A thin gold film is applied to the samples to ensure strong optical absorption and to establish a second boundary condition that introduces an expression containing the substrate thermal conductivity. The diffusivity and conductivity are obtained by comparing the measured phase profile of the temperature field to a continuum based model. A sensitivity analysis is used to identify the optimal film thickness for extracting the both substrate conductivity and diffusivity. Proof of principle studies were conducted on a range of samples having thermal properties that are representatives of current and advanced accident tolerant nuclear fuels. It is shown that by including the Kapitza resistance as an additional fitting parameter, the measured conductivity and diffusivity of all the samples considered agreed closely with the literature values. A distinguishing feature of this technique is that it does not require a priori knowledge of the optical spot size which greatly increases measurement reliability and reproducibility.

Early economic evaluation of emerging health technologies: protocol of a systematic review

PubMed Central

2014-01-01

Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. Discussion This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives. PMID:25055987

Early economic evaluation of emerging health technologies: protocol of a systematic review.

PubMed

Pham, Ba'; Tu, Hong Anh Thi; Han, Dolly; Pechlivanoglou, Petros; Miller, Fiona; Rac, Valeria; Chin, Warren; Tricco, Andrea C; Paulden, Mike; Bielecki, Joanna; Krahn, Murray

2014-07-23

The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to identify, measure, and value the likely effectiveness and the costs and consequences of the new technology, handling of uncertainty), and whether the study results adequately address the main study question or objective. Data will be summarized overall and stratified by publication status. This study is timely to inform early economic evaluation practice, given the international trend in early health technology assessment initiatives.

The Na 0.60CoO 2 phase, a potential conductive additive for the positive electrode of Ni-MH cells

NASA Astrophysics Data System (ADS)

Tronel, Frédéric; Guerlou-Demourgues, Liliane; Basterreix, Maïté; Delmas, Claude

The Na 0.60CoO 2 phase, obtained by a classical solid-state reaction, is tested as a conductive additive in the nickel oxide electrode. Though the process was not optimised in terms of additive repartition, the experiments show a good efficiency of the Na 0.60CoO 2 phase even at low cobalt content, compared to usual additives like CoO. Moreover, it increases the stability of the electrode at low potential. The added Na 0.60CoO 2 phase is shown to transform, during the first cycles, into a γ-type cobalt oxyhydroxide phase that is more stable at low potential than the usual additives.

Results of a space shuttle vehicle ferry configuration afterbody fairing optimization study using a 140A/B 0.0405-scale model orbiter (43-0) in the Rockwell International 7.75 by 11.0 ft low speed wind tunnel (OA124)

NASA Technical Reports Server (NTRS)

Houlihan, S. R.

1975-01-01

Experimental aerodynamic investigations were conducted on a dual-strut mounted 0.0405-scale representation of the 140A/B outer mold line space shuttle orbiter vehicle. The tests, conducted from 11 Oct., 1974 through 22 Oct., 1974, were primarily to investigate aerodynamic stability and control characteristics of the space shuttle orbiter ferry configuration. Four afterbody fairing configurations and various additions to them in the form of horizontal and ventral fins strakes and other aerodynamic protuberances were tested. Base line data on the basic orbiter with MPS nozzles and bodyflap were recorded. The drag of the optimum ferry configuration was increased to the level of the basic orbiter for possible flight test configurations by the addition of two sizes of perforated speed brakes on the tail cone surface.

Mixed convective peristaltic flow of carbon nanotubes submerged in water using different thermal conductivity models.

PubMed

Hayat, T; Ahmed, Bilal; Abbasi, F M; Ahmad, B

2016-10-01

Single Walled Carbon Nanotubes (SWCNTs) are the advanced product of nanotechnology having notable mechanical and physical properties. Peristalsis of SWCNTs suspended in water through an asymmetric channel is examined. Such mechanism is studied in the presence of viscous dissipation, velocity slip, mixed convection, temperature jump and heat generation/absorption. Mathematical modeling is carried out under the low Reynolds number and long wavelength approximation. Resulting nonlinear system is solved using the perturbation technique for small Brinkman's number. Physical analysis and comparison of the results in light of three different thermal conductivity models is also provided. It is reported that the heat transfer rate at the boundary increases with an increase in the nanotubes volume fraction. The addition of nanotubes affects the pressure gradient during the peristaltic flow. Moreover, the maximum velocity of the fluid decreases due to addition of the nanotubes. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Electronic Transport Properties of Carbon-Nanotube Networks: The Effect of Nitrate Doping on Intratube and Intertube Conductances

NASA Astrophysics Data System (ADS)

Ketolainen, T.; Havu, V.; Jónsson, E. Ö.; Puska, M. J.

2018-03-01

The conductivity of carbon-nanotube (CNT) networks can be improved markedly by doping with nitric acid. In the present work, CNTs and junctions of CNTs functionalized with NO3 molecules are investigated to understand the microscopic mechanism of nitric acid doping. According to our density-functional-theory band-structure calculations, there is charge transfer from the CNT to adsorbed molecules indicating p -type doping. The average doping efficiency of the NO3 molecules is higher if the NO3 molecules form complexes with water molecules. In addition to electron transport along individual CNTs, we also study electron transport between different types (metallic, semiconducting) of CNTs. Reflecting the differences in the electronic structures of semiconducting and metallic CNTs, we find that in addition to turning semiconducting CNTs metallic, doping further increases electron transport most efficiently along semiconducting CNTs as well as through the junctions between them.

Mechanical Degradation of Graphite/PVDF Composite Electrodes: A Model-Experimental Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takahashi, Kenji; Higa, Kenneth; Mair, Sunil

2015-12-11

Mechanical failure modes of a graphite/polyvinylidene difluoride (PVDF) composite electrode for lithium-ion batteries were investigated by combining realistic stress-stain tests and mathematical model predictions. Samples of PVDF mixed with conductive additive were prepared in a similar way to graphite electrodes and tested while submerged in electrolyte solution. Young's modulus and tensile strength values of wet samples were found to be approximately one-fifth and one-half of those measured for dry samples. Simulations of graphite particles surrounded by binder layers given the measured material property values suggest that the particles are unlikely to experience mechanical damage during cycling, but that the fatemore » of the surrounding composite of PVDF and conductive additive depends completely upon the conditions under which its mechanical properties were obtained. Simulations using realistic property values produced results that were consistent with earlier experimental observations.« less