Science.gov

Sample records for additional studies demonstrate

  1. Orbital construction demonstration study

    NASA Technical Reports Server (NTRS)

    1976-01-01

    A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA) was developed that can be used for evaluating and establishing practical large structural assembly operations. A flight plan for initial placement and continued utility is presented as a basic for an entirely new shuttle payload line-item having great future potential benefit for space applications. The OCDA is a three-axis stabilized platform in low-earth orbit with many structural nodals for mounting large construction and fabrication equipments. This equipment would be used to explore methods for constructing the large structures for future missions. The OCDA would be supported at regular intervals by the shuttle. Construction experiments and consumables resupply are performed during shuttle visit periods. A 250 kw solar array provides sufficient power to support the shuttle while attached to the OCDA and to run construction experiments at the same time. Wide band communications with a Telemetry and Data Relay Satellite compatible high gain antenna can be used between shuttle revisits to perform remote controlled, TV assisted construction experiments.

  2. Polymer Photooxidation: An Experiment to Demonstrate the Effect of Additives.

    ERIC Educational Resources Information Center

    Allen, Norman S.; McKellar, John F.

    1979-01-01

    This undergraduate experiment shows that the inclusion of an appropriate additive can have a very marked effect on the physical properties of a polymer. The polymer used is polypropylene and the additives are 2-hydroxy-4-octyloxy-benzophenone and benzophenone. (BB)

  3. Irreversible Wash Aid Additive for Cesium Mitigation: WARRP Demonstration

    SciTech Connect

    Kaminski, Michael

    2015-01-01

    This activity demonstrated, on a practical scale, the primary unit operations for building a containment structure for radioactive wash waters, washing down a hypothetically radioactively contaminated vehicle, collecting the hypothetically radioactive slurry waste water, filtering the hypothetically radioactive wash waters, disassembling the containment, and transporting the materials for final disposition.

  4. RADON MITIGATION STUDIES: NASHVILLE DEMONSTRATION

    EPA Science Inventory

    The report gives results of an EPA radon mitigation demonstration project involving 14 houses in the Nashville, TN, area with indoor radon levels of 5.6-47.6 pCi/L, using a variety of techniques, designed to be the most cost effective methods possible to implement, and yet adequa...

  5. LONG-TERM DEMONSTRATION OF SORBENT ENHANCEMENT ADDITIVE TECHNOLOGY FOR MERCURY CONTROL

    SciTech Connect

    Jason D. Laumb; Dennis L. Laudal; Grant E. Dunham; John P. Kay; Christopher L. Martin; Jeffrey S. Thompson; Nicholas B. Lentz; Alexander Azenkeng; Kevin C. Galbreath; Lucinda L. Hamre

    2011-05-27

    Long-term demonstration tests of advanced sorbent enhancement additive (SEA) technologies have been completed at five coal-fired power plants. The targeted removal rate was 90% from baseline conditions at all five stations. The plants included Hawthorn Unit 5, Mill Creek Unit 4, San Miguel Unit 1, Centralia Unit 2, and Hoot Lake Unit 2. The materials tested included powdered activated carbon, treated carbon, scrubber additives, and SEAs. In only one case (San Miguel) was >90% removal not attainable. The reemission of mercury from the scrubber at this facility prevented >90% capture.

  6. Studying the Greenhouse Effect: A Simple Demonstration.

    ERIC Educational Resources Information Center

    Papageorgiou, G.; Ouzounis, K.

    2000-01-01

    Studies the parameters involved in a presentation of the greenhouse effect and describes a simple demonstration of this effect. Required equipment includes a 100-120 watt lamp, a 250mL beaker, and a thermometer capable of recording 0-750 degrees Celsius together with a small amount of chloroform. (Author/SAH)

  7. Irreversible Wash Aid Additive for Cesium Mitigation. Small-Scale Demonstration and Lessons Learned

    SciTech Connect

    Kaminski, Michael

    2015-01-01

    The Irreversible Wash Aid Additive process has been under development by the U.S. Environmental Protection Agency (EPA) and Argonne National Laboratory (Argonne). This process for radioactive cesium mitigation consists of a solution to wash down contaminated structures, roadways, and vehicles and a sequestering agent to bind the radionuclides from the wash water and render them environmentally immobile. The purpose of this process is to restore functionality to basic services and immediately reduce the consequences of a radiologically-contaminated urban environment. Research and development have resulted in a down-selection of technologies for integration and demonstration at the pilot-scale level as part of the Wide Area Recovery and Resiliency Program (WARRP) under the Department of Homeland Security and the Denver Urban Area Security Initiative. As part of developing the methods for performing a pilot-scale demonstration at the WARRP conference in Denver in 2012, Argonne conducted small-scale field experiments at Separmatic Systems. The main purpose of these experiments was to refine the wash water collection and separations systems and demonstrate key unit operations to help in planning for the large scale demonstration in Denver. Since the purpose of these tests was to demonstrate the operations of the system, we used no radioactive materials. After a brief set of experiments with the LAKOS unit to familiarize ourselves with its operation, two experiments were completed on two separate dates with the Separmatic systems.

  8. Slip casting and extruding shapes of rhenium with metal oxide additives. 1: Feasibility demonstration

    NASA Technical Reports Server (NTRS)

    Barr, F. A.; Page, R. J.

    1986-01-01

    The feasibility of fabricating small rhenium parts with metal oxide additives by means of slip casting and extrusion techniques is described. The metal oxides, ZrO2 and HfO2 were stabilized into the cubic phase with Y2O3. Additions of metal oxide to the rhenium of up to 15 weight percent were used. Tubes of 17 mm diameter with 0.5 mm walls were slip cast by adapting current ceramic oxide techniques. A complete cast double conical nozzle demonstrated the ability to meet shapes and tolerances. Extrusion of meter long tubing lengths of 3.9 mm o.d. x 2.3 mm i.d. final dimension is documented. Sintering schedules are presented to produce better than 95% of theoretical density parts. Finished machining was found possible were requried by electric discharge machining and diamond grinding.

  9. 75 FR 52960 - Medicare Program; Rural Community Hospital Demonstration Program: Solicitation of Additional...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-30

    ... the June 2, 2010 Federal Register (75 FR 30918)). B. Participation in the Demonstration To participate... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Rural Community Hospital... hospitals to participate in the Rural Community Hospital Demonstration program for a 5-year period....

  10. Demonstration of an Ion Exchange Resin Addition/Removal System with Superlig 659

    SciTech Connect

    Norato, M.A.

    2000-12-19

    A pilot facility was designed and built in the Thermal Fluids Laboratory at the Savannah River Technology Center to demonstrate the slurry transport of ion exchange resins in and out of ion exchange columns.

  11. Experimental studies of ITER demonstration discharges

    NASA Astrophysics Data System (ADS)

    Sips, A. C. C.; Casper, T. A.; Doyle, E. J.; Giruzzi, G.; Gribov, Y.; Hobirk, J.; Hogeweij, G. M. D.; Horton, L. D.; Hubbard, A. E.; Hutchinson, I.; Ide, S.; Isayama, A.; Imbeaux, F.; Jackson, G. L.; Kamada, Y.; Kessel, C.; Kochl, F.; Lomas, P.; Litaudon, X.; Luce, T. C.; Marmar, E.; Mattei, M.; Nunes, I.; Oyama, N.; Parail, V.; Portone, A.; Saibene, G.; Sartori, R.; Stober, J. K.; Suzuki, T.; Wolfe, S. M.; C-Mod Team; ASDEX Upgrade Team; DIII-D Team; JET EFDA Contributors

    2009-08-01

    Key parts of the ITER scenarios are determined by the capability of the proposed poloidal field (PF) coil set. They include the plasma breakdown at low loop voltage, the current rise phase, the performance during the flat top (FT) phase and a ramp down of the plasma. The ITER discharge evolution has been verified in dedicated experiments. New data are obtained from C-Mod, ASDEX Upgrade, DIII-D, JT-60U and JET. Results show that breakdown for Eaxis < 0.23-0.33 V m-1 is possible unassisted (ohmic) for large devices like JET and attainable in devices with a capability of using ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. This allows optimization of the flux usage from the PF set. Additional heating keeps li(3) < 0.85 during the ramp up to q95 = 3. A rise phase with an H-mode transition is capable of achieving li(3) < 0.7 at the start of the FT. Operation of the H-mode reference scenario at q95 ~ 3 and the hybrid scenario at q95 = 4-4.5 during the FT phase is documented, providing data for the li (3) evolution after the H-mode transition and the li (3) evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation. The inductance could be kept <=1.2 during the first half of the current decay, using a slow Ip ramp down, but still consuming flux from the transformer. Alternatively, the discharges can be kept in H-mode during most of the ramp down, requiring significant amounts of additional heating.

  12. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  13. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  14. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  15. U.S. EPA's Ultraviolet Disinfection Technologies Demonstration Study

    EPA Science Inventory

    This presentation will give a background on USEPA's Disinfection Technologies Demonstration Study. This will include regulatory background, science background, goals of the project, and ultimate expected outcome of the project. This presentation will preceed a panel discussion ...

  16. Measuring Problem Solving with Technology: A Demonstration Study for NAEP

    ERIC Educational Resources Information Center

    Bennett, Randy Elliot; Persky, Hilary; Weiss, Andy; Jenkins, Frank

    2010-01-01

    This paper describes a study intended to demonstrate how an emerging skill, problem solving with technology, might be measured in the National Assessment of Educational Progress (NAEP). Two computer-delivered assessment scenarios were designed, one on solving science-related problems through electronic information search and the other on solving…

  17. A Study of Additional Costs of Second Language Instruction.

    ERIC Educational Resources Information Center

    McEwen, Nelly

    A study was conducted whose primary aim was to identify and explain additional costs incurred by Alberta, Canada school jurisdictions providing second language instruction in 1980. Additional costs were defined as those which would not have been incurred had the second language program not been in existence. Three types of additional costs were…

  18. A simple demonstration when studying the equivalence principle

    NASA Astrophysics Data System (ADS)

    Mayer, Valery; Varaksina, Ekaterina

    2016-06-01

    The paper proposes a lecture experiment that can be demonstrated when studying the equivalence principle formulated by Albert Einstein. The demonstration consists of creating stroboscopic photographs of a ball moving along a parabola in Earth's gravitational field. In the first experiment, a camera is stationary relative to Earth's surface. In the second, the camera falls freely downwards with the ball, allowing students to see that the ball moves uniformly and rectilinearly relative to the frame of reference of the freely falling camera. The equivalence principle explains this result, as it is always possible to propose an inertial frame of reference for a small region of a gravitational field, where space-time effects of curvature are negligible.

  19. Demonstration Report: ESTCP UXO Discrimination Study ESTCP PROJECT # MM-0838

    SciTech Connect

    Gasperikova, Erika

    2010-02-15

    In 2003, the Defense Science Board observed: 'The problem is that instruments that can detect the buried UXOs also detect numerous scrap metal objects and other artifacts, which leads to an enormous amount of expensive digging. Typically 100 holes may be dug before a real UXO is unearthed! The Task Force assessment is that much of this wasteful digging can be eliminated by the use of more advanced technology instruments that exploit modern digital processing and advanced multi-mode sensors to achieve an improved level of discrimination of scrap from UXOs.' Significant progress has been made in discrimination technology. To date, testing of these approaches has been primarily limited to test sites with only limited application at live sites. Acceptance of discrimination technologies requires demonstration of system capabilities at real UXO sites under real world conditions. Any attempt to declare detected anomalies to be harmless and requiring no further investigation will require demonstration to regulators of not only individual technologies, but of an entire decision making process. This characterization study was be the second phase in what is expected to be a continuing effort that will span several years. The FY06 Defense Appropriation contained funding for the 'Development of Advanced, Sophisticated, Discrimination Technologies for UXO Cleanup' in the Environmental Security Technology Certification Program (ESTCP). ESTCP responded by conducting a UXO Discrimination Study at the former Camp Sibert, AL. The results of this first demonstration were very encouraging. Although conditions were favorable at this site, a single target of interest (4.2-in mortar) and benign topography and geology, all of the classification approaches demonstrated were able to correctly identify a sizable fraction of the anomalies as arising from non-hazardous items that could be safely left in the ground. To build upon the success of the first phase of this study, ESTCP sponsored a

  20. A new synthetic route to a family of non-classical addition-type thermoplastics. I - Concept and demonstration

    NASA Technical Reports Server (NTRS)

    Pater, Ruth H.

    1988-01-01

    A synthesis scheme was developed for a host of nonclassical addition-type thermoplastics (ATT) that can be cured by an addition reaction, leading to a linear polymer structure. The synthesis involves the reaction of an acetylene-terminated prepolymer with either a bismaleimide (BMI) or a biscitraconimide. A new polymer, designated LaRC-RP80, synthesized using this scheme, was found to exhibit several significantly improved properties over the commercial BMI, Kerimid 601, including an eight-fold increase in toughness while maintaining a high Tg, a higher (by 167 C) heat stability, and a 50-percent increase in moisture resistance. In addition, LaRC-RP80 has good hot/wet lap shear strength and processes easily at 288 C without voids in the finished product.

  1. Whirl Flutter Studies for a SSTOL Transport Demonstrator

    NASA Technical Reports Server (NTRS)

    Acree, C. W., Jr.; Hoffman, Krishna

    2004-01-01

    A proposed new class of aircraft - the Advanced Theater Transport (ATT) will combine strategic range and high payload with 'Super-STOL' (short take-off and landing) capability. It is also proposed to modify a YC-15 into a technology demonstrator with a 20-deg tilt wing; four, eight-bladed propellers; cross-shafted gearboxes and V-22 engines. These constitute a unique combination of design features that potentially affect performance, loads and whirl-mode stability (whirl flutter). NASA Ames Research Center is working with Boeing and Hamilton Sundstrand on technology challenges presented by the concept; the purpose of NASA involvement is to establish requirements for the demonstrator and for early design guidance, with emphasis on whirl flutter. CAMRAD II is being used to study the effects of various design features on whirl flutter, with special attention to areas where such features differ from existing aircraft, notably tiltrotors. Although the stability margins appear to be more than adequate, the concept requires significantly different analytical methods, principally including far more blade modes, than typically used for tiltrotors.

  2. The Use of Demonstrative Pronoun and Demonstrative Determiner "This" in Upper-Level Student Writing: A Case Study

    ERIC Educational Resources Information Center

    Rustipa, Katharina

    2015-01-01

    Demonstrative "this" is worthy to investigate because of the role of "this" as a common cohesive device in academic writing. This study attempted to find out the variables underlying the realization of demonstrative "this" in graduate-student writing of Semarang State University, Indonesia. The data of the study were…

  3. A Chinaman's Chance in Civil Rights Demonstration: A Case Study.

    ERIC Educational Resources Information Center

    Sim, Yawsoon

    A traffic incident in April of 1975 developed into an unprecedented civil rights demonstration by Chinese residents in New York City's Chinatown in May of that year. This paper attempts to trace the factors which led to this large scale demonstration and analyze the development of decision making in this case. The demonstration was the result of…

  4. Study on thermal effects & sulfurized additives, in lubricating greases

    NASA Astrophysics Data System (ADS)

    Shah, Ami Atul

    Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to

  5. Demonstration of the Recent Additions in Modeling Capabilities for the WEC-Sim Wave Energy Converter Design Tool: Preprint

    SciTech Connect

    Tom, N.; Lawson, M.; Yu, Y. H.

    2015-03-01

    WEC-Sim is a mid-fidelity numerical tool for modeling wave energy conversion (WEC) devices. The code uses the MATLAB SimMechanics package to solve the multi-body dynamics and models the wave interactions using hydrodynamic coefficients derived from frequency domain boundary element methods. In this paper, the new modeling features introduced in the latest release of WEC-Sim will be presented. The first feature discussed is the conversion of the fluid memory kernel to a state-space approximation that provides significant gains in computational speed. The benefit of the state-space calculation becomes even greater after the hydrodynamic body-to-body coefficients are introduced as the number of interactions increases exponentially with the number of floating bodies. The final feature discussed is the capability toadd Morison elements to provide additional hydrodynamic damping and inertia. This is generally used as a tuning feature, because performance is highly dependent on the chosen coefficients. In this paper, a review of the hydrodynamic theory for each of the features is provided and successful implementation is verified using test cases.

  6. Syntax of Demonstrative Adjectives in Japanese: A Preliminary Study.

    ERIC Educational Resources Information Center

    Fukuda, Minoru

    1996-01-01

    The interactions among demonstrative adjectives in certain genitive phrases and WH-words in Japanese are investigated in this report on a work in progress. It is argued that certain demonstrative adjectives in Japanese, such as "ano" ("that"), occupy the highest Spec position in DP and that they block A-bar movement out of DP; genitive phrases,…

  7. A Semantic Study of German and Chinese Demonstratives

    ERIC Educational Resources Information Center

    Lin, Lin

    2013-01-01

    This dissertation explores, analyzes, and compares the usage of German and Chinese demonstratives. Discourse and textual uses of the forms will be considered as well as their locative and temporal uses. I observe that in both languages the demonstratives can be used to refer to referents. However, they depart from the common assumption that…

  8. Use of interactive lecture demonstrations: A ten year study

    NASA Astrophysics Data System (ADS)

    Sharma, Manjula D.; Johnston, Ian D.; Johnston, Helen; Varvell, Kevin; Robertson, Gordon; Hopkins, Andrew; Stewart, Chris; Cooper, Ian; Thornton, Ronald

    2010-07-01

    The widely held constructivist view of learning advocates student engagement via interactivity. Within the physics education research community, several specific interactive strategies have been developed to enhance conceptual understanding. One such strategy, the Interactive Lecture Demonstration (ILD) is designed for large lecture classes and, if measured using specific conceptual surveys, is purported to provide learning gains of up to 80%. This paper reports on learning gains for two different Projects over ten years. In Project 1, the ILDs were implemented from 1999 to 2001 with students who had successfully completed senior high school physics. The learning gains for students not exposed to the ILDs were in the range 13% to 16% while those for students exposed to the ILDs was 31% to 50%. In Project 2, the ILDs were implemented from 2007 to 2009 with students who had not studied senior high school physics. Since the use of ILDs in Project 1 had produced positive results, ethical considerations dictated that all students be exposed to ILDs. The learning gains were from 28% to 42%. On the one hand it is pleasing to note that there is an increase in learning gains, yet on the other, we note that the gains are nowhere near the claimed 80%. This paper also reports on teacher experiences of using the ILDs, in Project 2.

  9. Denver Potable Water Reuse Demonstration Project: comprehensive chronic rat study.

    PubMed

    Condie, L W; Lauer, W C; Wolfe, G W; Czeh, E T; Burns, J M

    1994-11-01

    The health effects testing program for the Denver Water Department's Potable Water Reuse Demonstration Project was designed to evaluate the relative health effects of highly treated reclaimed water derived from secondary wastewater in comparison with Denver's present high-quality drinking water. The 1 x 10(6) gal/day treatment plant provided 500-fold concentrates of water that had been treated by multiple processes to remove microbial and chemical contaminants. Fischer 344 rats were exposed to the complex mixture solutions for up to 2 yr to evaluate chronic toxicity and oncogenicity effects. The following parameters were evaluated: clinical observations, survival rate, growth, food and water consumption, haematology, clinical chemistry, urinalysis, organ weights, gross autopsy and histopathological examination of all lesions, major tissues and organs. Clinical pathology, gross pathology, and microscopic pathology conducted at wk 26 and 65 and at the end of the study did not reveal any findings that could be considered to be treatment related. Administration of drinking water concentrates at up to 500 times the original concentration in the original water samples to F344 rats for up to 104 wk did not result in any overt toxicological or carcinogenic effects. PMID:7959456

  10. Webcams for Bird Detection and Monitoring: A Demonstration Study

    PubMed Central

    Verstraeten, Willem W.; Vermeulen, Bart; Stuckens, Jan; Lhermitte, Stefaan; Van der Zande, Dimitry; Van Ranst, Marc; Coppin, Pol

    2010-01-01

    Better insights into bird migration can be a tool for assessing the spread of avian borne infections or ecological/climatologic issues reflected in deviating migration patterns. This paper evaluates whether low budget permanent cameras such as webcams can offer a valuable contribution to the reporting of migratory birds. An experimental design was set up to study the detection capability using objects of different size, color and velocity. The results of the experiment revealed the minimum size, maximum velocity and contrast of the objects required for detection by a standard webcam. Furthermore, a modular processing scheme was proposed to track and follow migratory birds in webcam recordings. Techniques such as motion detection by background subtraction, stereo vision and lens distortion were combined to form the foundation of the bird tracking algorithm. Additional research to integrate webcam networks, however, is needed and future research should enforce the potential of the processing scheme by exploring and testing alternatives of each individual module or processing step. PMID:22319308

  11. Human habitation field study of the Habitat Demonstration Unit (HDU)

    NASA Astrophysics Data System (ADS)

    Litaker, Harry L.; Archer, Ronald D.; Szabo, Richard; Twyford, Evan S.; Conlee, Carl S.; Howard, Robert L.

    2013-10-01

    Landing and supporting a permanent outpost on a planetary surface represents humankind's capability to expand its own horizons and challenge current technology. With this in mind, habitability of these structures becomes more essential given the longer durations of the missions. The purpose of this evaluation was to obtain preliminary human-in-the-loop performance data on the Habitat Demonstration Unit (HDU) in a Pressurized Excursion Module (PEM) configuration during a 14-day simulated lunar exploration field trial and to apply this knowledge to further enhance the habitat's capabilities for forward designs. Human factors engineers at the NASA/Johnson Space Center's Habitability and Human Factors Branch recorded approximately 96 h of crew task performance with four work stations. Human factors measures used during this study included the NASA Task Load Index (TLX) and customized post questionnaires. Overall the volume for the PEM was considered acceptable by the crew; however; the habitat's individual work station volume was constrained when setting up the vehicle for operation, medical operations, and suit maintenance while general maintenance, logistical resupply, and geo science was considered acceptable. Crew workload for each station indicated resupply as being the lowest rated, with medical operations, general maintenance, and geo science tasks as being light, while suit maintenance was considered moderate and general vehicle setup being rated the highest. Stowage was an issue around the habitat with the Space Exploration Vehicle (SEV) resupply stowage located in the center of the habitat as interfering with some work station volumes and activities. Ergonomics of the geo science station was considered a major issue, especially with the overhead touch screens.

  12. Decontamination demonstration facility (D. D. F) modularization/mobility study

    SciTech Connect

    FitzPatrick, V.F.; Butts, H.L.; Moles, R.G.; Lundgren, R.A.

    1980-11-01

    The component decontamination technology, developed under the DOE sponsored TRU Waste Decontamination Program, has potential benefits to nuclear utility owners in four strategic areas: (1) Meeting ALARA Criteria for Maintenance/Operations; (2) Management of wastes and waste forms; (3) Accident Response; (4) Decommissioning. The most significant step in transferring this technology directly to the nuclear industry is embodied in the TMI Decontamination Demonstration Facility (D.D.F.).

  13. Orbital construction demonstration study. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA), that can be used for technology growth and verification, and as the construction facility for a variety of large structures is presented. The OCDA design includes a large work platform, a rotating manipulator boom, a 250 kw solar array, and a core module of subsystems with a total mass of 37,093 kg, that can be assembled in three shuttle flights. An analysis of OCDA continued utility potential indicates that a shuttle tended platform with 250 kW of power can effectively be used to construct highly beneficial antenna systems and large demonstration articles that advance solar power satellite technologies. The construction of 100 m parabolic reflectors for use as a radiometer for measuring soil moisture and water salinity was found to be within the capabilities of OCDA concept. With 252 fixed beams for high population centers, and 16 scanning beams for rural areas, the antenna has the potential to significantly improve U.S. space based communications systems. The OCDA, that is slightly increased in size, was found adequate to build a large 2 MW solar array which, when coupled to a transmit antenna, demonstrate power transfer from space to ground.

  14. Benchmark Study of Industrial Needs for Additive Manufacturing in Finland

    NASA Astrophysics Data System (ADS)

    Lindqvist, Markku; Piili, Heidi; Salminen, Antti

    Additive manufacturing (AM) is a modern way to produce parts for industrial use. Even though the technical knowledge and research of AM processes are strong in Finland, there are only few industrial applications. Aim of this study is to collect practical knowledge of companies who are interested in industrial use of AM, especially in South-Eastern Finland. Goal of this study is also to investigate demands and requirements of applications for industrial use of AM in this area of Finland. It was concluded, that two of the reasons prohibiting wider industrial use of AM in Finland, are wrong expectations against this technology as well as lack of basic knowledge of possibilities of the technology. Especially, it was noticed that strong 3D-hype is even causing misunderstandings. Nevertheless, the high-level industrial know-how in the area, built around Finnish lumber industry is a strong foundation for the additive manufacturing technology.

  15. Direct oxide reduction demonstration, small-scale studies

    SciTech Connect

    Long, J.L.; Santi, D.J.; Fisher, D.C.; Humiston, T.J.

    1991-12-09

    This project was initiated to provide process design information to the Plutonium Recovery Project (PRP). Although direct oxide reduction (DOR) has been operated in a production mode both at the Rocky Flats Plant (now operated by EG G, Inc.) and Los Alamos National Laboratory, many aspects of the process are ill-defined. Because the PRP plans include significant DOR capability, a well-defined process should minimize capital cost and maximize productivity. Reduced radiation exposure may also be realized. A detailed, statistically valid investigation of the direct oxide reduction process was carried out utilizing 100 grams or less of plutonium dioxide per experiment. Conditions were established for obtaining 95% + yields. Conclusions drawn from the results of the experimental work were utilized to make recommendations for future large-scale investigative and confirmative work as well large-scale production demonstration work. 4 refs., 5 figs., 14 tabs.

  16. Direct oxide reduction demonstration, small-scale studies

    SciTech Connect

    Long, J.L.; Santi, D.J.; Fisher, D.C.; Humiston, T.J.

    1991-12-09

    This project was initiated to provide process design information to the Plutonium Recovery Project (PRP). Although direct oxide reduction (DOR) has been operated in a production mode both at the Rocky Flats Plant (now operated by EG&G, Inc.) and Los Alamos National Laboratory, many aspects of the process are ill-defined. Because the PRP plans include significant DOR capability, a well-defined process should minimize capital cost and maximize productivity. Reduced radiation exposure may also be realized. A detailed, statistically valid investigation of the direct oxide reduction process was carried out utilizing 100 grams or less of plutonium dioxide per experiment. Conditions were established for obtaining 95% + yields. Conclusions drawn from the results of the experimental work were utilized to make recommendations for future large-scale investigative and confirmative work as well large-scale production demonstration work. 4 refs., 5 figs., 14 tabs.

  17. Electrostatic Levitation for Studies of Additive Manufactured Materials

    NASA Technical Reports Server (NTRS)

    SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

    2014-01-01

    The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL

  18. A Study of Additive Noise Model for Robust Speech Recognition

    NASA Astrophysics Data System (ADS)

    Awatade, Manisha H.

    2011-12-01

    A model of how speech amplitude spectra are affected by additive noise is studied. Acoustic features are extracted based on the noise robust parts of speech spectra without losing discriminative information. An existing two non-linear processing methods, harmonic demodulation and spectral peak-to-valley ratio locking, are designed to minimize mismatch between clean and noisy speech features. Previously studied methods, including peak isolation [1], do not require noise estimation and are effective in dealing with both stationary and non-stationary noise.

  19. Microwave sanitization of color additives used in cosmetics: feasibility study.

    PubMed

    Jasnow, S B; Smith, J L

    1975-08-01

    Microwave exposure has been explored as a method of microbiologically sanitizing color additives used in cosmetic products. Selected microbiologically unacceptable cosmetic color additives, D&C red no. 7 Ca lake (certified synthetic organic color), carmine (natural organic color not subject to certification), and chromium hydroxide green (inorganic color not subject to certification), were submitted to microwave exposure. Gram-negative bacteria were eliminated, as verified by enrichment procedures, and levels of gram-positive bacteria were reduced. Generally, analytical and dermal safety studies indicated no significant alterations in physical, chemical, and toxicological properties of the colors. Sanitization was also successfully performed on other colors (D&C red no. 9 Ba lake, D&C red no. 12 Ba lake, D&C green no. 5, and FD&C red no. 4); initial physical and chemical tests were satisfactory. Results indicated that this method of sanitization is feasible and warrants further investigation.

  20. BIG FROG WILDERNESS STUDY AREA AND ADDITIONS, TENNESSEE AND GEORGIA.

    USGS Publications Warehouse

    Slack, John F.; Gazdik, Gertrude C.

    1984-01-01

    A mineral-resource survey was made of the Big Frog Wilderness Study Area and additions, Tennessee-Georgia. Geochemical sampling found traces of gold, zinc, copper, and arsenic in rocks, stream sediments, and panned concentrates, but not in sufficient quantities to indicate the presence of deposits of these metals. The results of the survey indicate that there is little promise for the occurrence of metallic mineral deposits within the study area. The only apparent resources are nonmetallic commodities including rock suitable for construction materials, and small amounts of sand and gravel; however, these commodities are found in abundance outside the study area. A potential may exist for oil and natural gas at great depths, but this cannot be evaluated by the present study.

  1. Recommended Protocol for Round Robin Studies in Additive Manufacturing

    PubMed Central

    Moylan, Shawn; Brown, Christopher U.; Slotwinski, John

    2016-01-01

    One way to improve confidence and encourage proliferation of additive manufacturing (AM) technologies and parts is by generating more high quality data describing the performance of AM processes and parts. Many in the AM community see round robin studies as a way to generate large data sets while distributing the cost among the participants, thereby reducing the cost to individual users. The National Institute of Standards and Technology (NIST) has conducted and participated in several of these AM round robin studies. While the results of these studies are interesting and informative, many of the lessons learned in conducting these studies concern the logistics and methods of the study and unique issues presented by AM. Existing standards for conducting interlaboratory studies of measurement methods, along with NIST’s experience, form the basis for recommended protocols for conducting AM round robin studies. The role of round robin studies in AM qualification, some of the limitations of round robin studies, and the potential benefit of less formal collaborative experiments where multiple factors, AM machine being only one, are varied simultaneously are also discussed. PMID:27274602

  2. Environmental process improvement feasibility study and demonstration program

    NASA Technical Reports Server (NTRS)

    Martin, Rodger L.

    1994-01-01

    This report is the final product of an environmental study conducted by Western Commercial Space Center, Inc. under contract to Tennessee-Calspan Center for Space Transportation and Applied Research. The purpose of this investigation is to accurately document the current environmental and permitting processes associated with commercial space launch activity at Vandenberg AFB, and make recommendations to streamline those processes. The particular areas of interest focus on: identifying applicable Federal, state, and local laws, Department of Defense directives, and Air force regulations; defining the environmental process on Vandenberg AFB and how it relates with other agencies, including Federal and state regulatory agencies; and defining the air quality permit process. Study investigation results are applied to an example Pilot Space Launch Vehicle (PSLV) planning to launch from Vandenberg AFB. The PSLV space hardware is analyzed with respect to environmental and permitting issues associated with vehicle processing, facilities required (existing or new), and launch. The PSLV verified the earlier findings of the study and gave insight into streamlining recommendations.

  3. Feasibility study of full-reactor gas core demonstration test

    NASA Technical Reports Server (NTRS)

    Kunze, J. F.; Lofthouse, J. H.; Shaffer, C. J.; Macbeth, P. J.

    1973-01-01

    Separate studies of nuclear criticality, flow patterns, and thermodynamics for the gas core reactor concept have all given positive indications of its feasibility. However, before serious design for a full scale gas core application can be made, feasibility must be shown for operation with full interaction of the nuclear, thermal, and hydraulic effects. A minimum sized, and hence minimum expense, test arrangement is considered for a full gas core configuration. It is shown that the hydrogen coolant scattering effects dominate the nuclear considerations at elevated temperatures. A cavity diameter of somewhat larger than 4 ft (122 cm) will be needed if temperatures high enough to vaporize uranium are to be achieved.

  4. Transcriptomic landscape of Pueraria lobata demonstrates potential for phytochemical study.

    PubMed

    Han, Rongchun; Takahashi, Hiroki; Nakamura, Michimi; Yoshimoto, Naoko; Suzuki, Hideyuki; Shibata, Daisuke; Yamazaki, Mami; Saito, Kazuki

    2015-01-01

    Pueraria lobata (Willd.) Ohwi has a long and broad application in the treatment of disease. However, in the US and EU, it is treated as a notorious weed. The information to be gained from decoding the deep transcriptome profile would facilitate further research on P. lobata. In this study, more than 93 million fastq format reads were generated by Illumina's next-generation sequencing approach using five types of P. lobata tissue, followed by CLC de novo assembly methods, ultimately yielding about 83,041 contigs in total. Then BLASTx similarity searches against the NCBI NR database and UniProtKB database were conducted. Once the duplicates among BLASTx hits were eliminated, ID mapping against the UniProt database was conducted online to retrieve Gene Ontology information. In search of the putative genes relevant to essential biosynthesis pathways, all 1,348 unique enzyme commission numbers were used to map pathways against the Kyoto Encyclopedia of Genes and Genomes. Enzymes related to the isoflavonoid and flavonoid biosynthesis pathways were focused for detailed investigation and subsequently, quantitative real-time reverse transcription polymerase chain reaction was conducted for biological validation. Metabolites of interest, puerarin and daidzin were studied by HPLC. The findings in this report may serve as a footstone for further research into this promising medicinal plant. PMID:26157443

  5. Making intelligent systems team players: Additional case studies

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Schreckenghost, Debra L.; Rhoads, Ron W.

    1993-01-01

    Observations from a case study of intelligent systems are reported as part of a multi-year interdisciplinary effort to provide guidance and assistance for designers of intelligent systems and their user interfaces. A series of studies were conducted to investigate issues in designing intelligent fault management systems in aerospace applications for effective human-computer interaction. The results of the initial study are documented in two NASA technical memoranda: TM 104738 Making Intelligent Systems Team Players: Case Studies and Design Issues, Volumes 1 and 2; and TM 104751, Making Intelligent Systems Team Players: Overview for Designers. The objective of this additional study was to broaden the investigation of human-computer interaction design issues beyond the focus on monitoring and fault detection in the initial study. The results of this second study are documented which is intended as a supplement to the original design guidance documents. These results should be of interest to designers of intelligent systems for use in real-time operations, and to researchers in the areas of human-computer interaction and artificial intelligence.

  6. RAMSEYS DRAFT WILDERNESS STUDY AREA AND ADDITION, VIRGINIA.

    USGS Publications Warehouse

    Lesure, Frank G.; Mory, Peter C.

    1984-01-01

    Mineral-resource surveys of the Ramseys Draft Wilderness Study Area and adjoining roadless area addition in George Washington National Forest in the western valley and ridge province, Augusta and Highland Counties, Virginia, were done. The surveys outlined three small areas containing anomalous amounts of copper, lead, and zinc related to stratabound red-bed copper mineralization, but these occurrences are not large and are not considered as having mineral-resource potential. The area contains abundant sandstone suitable for construction materials and shale suitable for making brick, tile, and other low-grade ceramic products, but these commodities occur in abundance outside the wilderness study area. Structural conditions are probably favorable for the accumulation of natural gas, but exploratory drilling has not been done sufficiently near the area to evaluate the gas potential.

  7. Experimental Study of Additives on Viscosity biodiesel at Low Temperature

    NASA Astrophysics Data System (ADS)

    Fajar, Berkah; Sukarno

    2015-09-01

    An experimental investigation was performed to find out the viscosity of additive and biodiesel fuel mixture in the temperature range from 283 K to 318 K. Solutions to reduce the viscosity of biodiesel is to add the biodiesel with some additive. The viscosity was measured using a Brookfield Rheometer DV-II. The additives were the generic additive (Diethyl Ether/DDE) and the commercial additive Viscoplex 10-330 CFI. Each biodiesel blends had a concentration of the mixture: 0.0; 0.25; 0.5; 0.75; 1.0; and 1.25% vol. Temperature of biodiesel was controlled from 40°C to 0°C. The viscosity of biodiesel and additive mixture at a constant temperature can be approximated by a polynomial equation and at a constant concentration by exponential equation. The optimum mixture is at 0.75% for diethyl ether and 0.5% for viscoplex.

  8. Additive Manufacturing in Production: A Study Case Applying Technical Requirements

    NASA Astrophysics Data System (ADS)

    Ituarte, Iñigo Flores; Coatanea, Eric; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

    Additive manufacturing (AM) is expanding the manufacturing capabilities. However, quality of AM produced parts is dependent on a number of machine, geometry and process parameters. The variability of these parameters affects the manufacturing drastically and therefore standardized processes and harmonized methodologies need to be developed to characterize the technology for end use applications and enable the technology for manufacturing. This research proposes a composite methodology integrating Taguchi Design of Experiments, multi-objective optimization and statistical process control, to optimize the manufacturing process and fulfil multiple requirements imposed to an arbitrary geometry. The proposed methodology aims to characterize AM technology depending upon manufacturing process variables as well as to perform a comparative assessment of three AM technologies (Selective Laser Sintering, Laser Stereolithography and Polyjet). Results indicate that only one machine, laser-based Stereolithography, was feasible to fulfil simultaneously macro and micro level geometrical requirements but mechanical properties were not at required level. Future research will study a single AM system at the time to characterize AM machine technical capabilities and stimulate pre-normative initiatives of the technology for end use applications.

  9. Health studies indicate MTBE is safe gasoline additive

    SciTech Connect

    Anderson, E.V.

    1993-09-01

    Implementation of the oxygenated fuels program by EPA in 39 metropolitan areas, including Fairbanks and Anchorage, Alaska, in the winter of 1992, encountered some unexpected difficulties. Complaints of headaches, dizziness, nausea, and irritated eyes started in Fairbanks, jumped to Anchorage, and popped up in various locations in the lower 48 states. The suspected culprit behind these complaints was the main additive for oxygenation of gasoline is methyl tert-butyl ether (MTBE). A test program, hastily organized in response to these complaints, has indicated that MTBE is a safe gasoline additive. However, official certification of the safety of MTBE is still awaited.

  10. Kinetic study of additions of dialkylmagnesium compounds to a cycloprene

    SciTech Connect

    Watkins, E.K.; Richey, H.G. Jr.

    1992-11-01

    Reaction of Et{sub 2}Mg and spiro[2.4]hept-1-ene (1) in tetahydrofuran followed by hydrolysis furnishes mainly 1-ethylspiro[2.4]heptane (3); when hydrolysis is with D{sub 2}O, {ge}98% of this (Z)-1-ethylspirol[2.4]heptane-2-d (4). Some metalation of 1 and formation of higher molecular weight products incorporating two or three molecules of 1 also take place. Formation of 3 is first order in 1 and in Et{sub 2}Mg, and at 35.47{degrees}C the rate constant is 1.2 x 10{sup -5} L M{sup -1}s{sup -1}. Under the same conditions, the rate of addition (1.5 x 10{sup -5} L M{sup -1}{sub s}{sup -1}). Under the same conditions, the rate of addition (1.5 x 10{sup -5} L mol{sup -1} {sub s}{sup -1}) of the Grignard reagent prepared from EtBr is similar. Reactions of 1 with Me{sub 2}Mg, I-Pr{sub 2}Mg, and t-Bu{sub 2}Mg. Added Fe(acac){sub 3} increases the rate of formation of 3 from reactions of 1 with either Et{sub 2}Mg or the Grignard reagent prepared from EtBr, but additional products also are formed. 55 refs., 2 tabs.

  11. NMR relaxometry study of plaster mortar with polymer additives

    SciTech Connect

    Jumate, E.; Manea, D.; Moldovan, D.; Fechete, R.

    2013-11-13

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T{sub 2} relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T{sub 2} distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T{sub 2} relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T{sub 2} relaxation rates corresponding to the bound water.

  12. Demonstration testing and evaluation of in situ soil heating. Treatability study work plan, Revision 1

    SciTech Connect

    Sresty, G.C.

    1994-07-07

    A Treatability Study planned for the demonstration of the in situ electromagnetic (EM) heating process to remove organic solvents is described in this Work Plan. The treatability study will be conducted by heating subsurface vadose-zone soils in an organic plume adjacent to the Classified Burial Ground K-1070-D located at K-25 Site, Oak Ridge. The test is scheduled to start during the fourth quarter of FY94 and will be completed during the first quarter of FY95. The EM heating process for soil decontamination is based on volumetric heating technologies developed during the `70s for the recovery of fuels from shale and tar sands by IIT Research Institute (IITRI) under a co-operative program with the US Department of Energy (DOE). Additional modifications of the technology developed during the mid `80s are currently used for the production of heavy oil and waste treatment. Over the last nine years, a number of Government agencies (EPA, Army, AF, and DOE) and industries sponsored further development and testing of the in situ heating and soil decontamination process for the remediation of soils containing hazardous organic contaminants. In this process the soil is heated in situ using electrical energy. The contaminants are removed from the soil due to enhanced vaporization, steam distillation and stripping. IITRI will demonstrate the EM Process for in situ soil decontamination at K-25 Site under the proposed treatability study. Most of the contaminants of concern are volatile organics which can be removed by heating the soil to a temperature range of 85 to 95 C. The efficiency of the treatment will be determined by comparing the concentration of contaminants in soil samples. Samples will be obtained before and after the demonstration for a measurement of the concentration of contaminants of concern.

  13. The Altus Cumulus Electrification Study (ACES): A UAV-Based Science Demonstration

    NASA Technical Reports Server (NTRS)

    Blakeslee, R. J.; Croskey, C. L.; Desch, M. D.; Farrell, W. M.; Goldberg, R. A.; Houser, J. G.; Kim, H. S.; Mach, D. M.; Mitchell, J. D.; Stoneburner, J. C.

    2003-01-01

    The Altus Cumulus Electrification Study (ACES) is an unmanned aerial vehicle (UAV)- based project that investigated thunderstorms in the vicinity of the Florida Everglades in August 2002. ACES was conducted to investigate storm electrical activity and its relationship to storm morphology, and to validate satellite-based lightning measurements. In addition, as part of the NASA sponsored UAV-based science demonstration program, this project provided a scientifically useful demonstration of the utility and promise of UAV platforms for Earth science and applications observations. ACES employed the Altus II aircraft, built by General Atomics - Aeronautical Systems, Inc. Key science objectives simultaneously addressed by ACES are to: (1) investigate lightning-storm relationships, (2) study storm electrical budgets, and provide Lightning Imaging Sensor validation. The ACES payload included electrical, magnetic, and optical sensors to remotely characterize the lightning activity and the electrical environment within and around thunderstorms. ACES contributed important electrical and optical measurements not available from other sources. Also, the high altitude vantage point of the UAV observing platform (up to 55,000 feet) provided cloud-top perspective. By taking advantage of its slow flight speed (70 to 100 knots), long endurance, and high altitude flight, the Altus was flown near, and when possible, over (but never into) thunderstorms for long periods of time that allowed investigations to be conducted over entire storm life cycles. An innovative real time weather system was used to identify and vector the aircraft to selected thunderstorms and safely fly around these storms, while, at the same time monitor the weather near our base of operations. In addition, concurrent ground-based observations that included radar (Miami and Key West WSRBD, NASA NPOL), satellite imagery, and lightning (NALDN and Los Alamos EDOT) enable the UAV measurements to be more completely

  14. Environmental Technology Verification (ETV) Program Case Studies: Demonstrating Program Outcomes, Volume III

    EPA Science Inventory

    This booklet, ETV Program Case Studies: Demonstrating Program Outcomes, Volume III contains two case studies, addressing verified environmental technologies for decentalized wastewater treatment and converting animal waste to energy. Each case study contains a brief description ...

  15. Additional EIPC Study Analysis: Interim Report on High Priority Topics

    SciTech Connect

    Hadley, Stanton W

    2013-11-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 13 topics was developed for further analysis; this paper discusses the first five.

  16. Additional studies for the spectrophotometric measurement of iodine in water

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Previous work in iodine spectroscopy is briefly reviewed. Continued studies of the direct spectrophotometric determination of aqueous iodine complexed with potassium iodide show that free iodine is optimally determined at the isosbestic point for these solutions. The effects on iodine determinations of turbidity and chemical substances (in trace amounts) is discussed and illustrated. At the levels tested, iodine measurements are not significantly altered by such substances. A preliminary design for an on-line, automated iodine monitor with eventual capability of operating also as a controller was analyzed and developed in detail with respect single beam colorimeter operating at two wavelengths (using a rotating filter wheel). A flow-through sample cell allows the instrument to operate continuously, except for momentary stop flow when measurements are made. The timed automatic cycling of the system may be interrupted whenever desired, for manual operation. An analog output signal permits controlling an iodine generator.

  17. A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part III.

    ERIC Educational Resources Information Center

    Behr, Shirley K.; And Others

    The report describes the third and final year of a 3-year case study of the technical assistance process as implemented by the Technical Assistance Development System (TADS) for the staffs of two demonstration programs for preschool handicapped children and their families. Following a review of TADS and the two demonstration programs, the…

  18. Family Literacy Lasts. The NFER Follow-up Study of the Basic Skills Agency's Demonstration Programmes.

    ERIC Educational Resources Information Center

    Brooks, Greg; Gorman, Tom; Harman, John; Hutchison, Dougal; Kinder, Kay; Moor, Helen; Wilkin, Anne

    The benefits of family literacy programs for children were examined in a 1997 follow-up study in which 154 parents and 237 children who had participated in a family literacy demonstration program in 1994-1995 were interviewed along with the teachers of a subsample of the children and the demonstration program coordinators. The demonstration…

  19. Couples Counseling in Alzheimer's Disease: Additional Clinical Findings from a Novel Intervention Study.

    PubMed

    Auclair, Ursula; Epstein, Cynthia; Mittelman, Mary

    2009-04-01

    This article describes the clinical findings of a study designed to assess the benefit of counseling for couples, one of whom is in the early stage of Alzheimer's disease (AD). We previously reported our findings based on the first 12 couples that enrolled in the study. Based on the treatment of 30 additional couples, we have refined our treatment strategy to include concepts of Gestalt Therapy and Transactional Analysis and identified prevalent issues of concern to this cohort. The study design has remained as described in the earlier article (Epstein et al., 2006), and has proven to be appropriate to meet the goals of this intervention as indicated by our clinical experience and feedback from the participating couples. Case vignettes demonstrate how to conduct the sessions so that the experience of each member of the dyad is validated, while acknowledging the differential impact of the disease on them. PMID:19865591

  20. Addition of β-mercaptoethanol is a prerequisite for high-quality RNA isolation using QIAsymphony technology as demonstrated by detection of molecular aberrations in hematologic malignancies.

    PubMed

    van der Poel-van de Luytgaarde, Sonja C P A M; Geertsma-Kleinekoort, Wendy M C; Goudswaard, Chantal S; Hogenbirk-Hupkes, Pauline E; van Hoven-Beijen, M Antoinette; van de Werf, Marloes; Chu, Isabel W T; van Kapel, Jan; Valk, Peter J M

    2013-06-01

    The isolation of high-quality RNA and DNA from various specimens is essential to perform reliable molecular diagnostic assays. In routine diagnostics of hematologic malignancies isolation of high-quality RNA is a prerequisite. We used QIAsymphony technology (QST) using a customized RNA CT 800 V6 protocol for automated semi-high-throughput isolation of RNA from human specimens and compared the results for breakpoint cluster region-c-abl oncogene 1 (BCR-ABL1) quantification by real-time quantitative polymerase chain reaction (RQ-PCR) and detection of JAK2 V617F mutations by reverse-transcriptase PCR (RT-PCR) on QST RNA with RNA isolation performed with our routine manual method using RNA-Bee (RB). QST RNA was isolated with and without the addition of β-mercaptoethanol (BME). Addition of BME to the lysis buffer RLT Plus resulted in consistently lower Ct values in analyses of the reference gene porphobilinogen deaminase (PBGD). Further, the BCR-ABL1 mRNA levels of the QST RNA isolation were highly consistent with RB RNA isolation, only when the lysis buffer RLT Plus in addition contained BME. Moreover, cases of myeloproliferative neoplasms (MPN) with low levels of JAK2 V617F mRNA were even missed in QST when lysis buffer RLT Plus was used, but they were readily detected after addition of BME.

  1. The Eight-Year Study: From Evaluative Research to Demonstration Project, 1930-1940

    ERIC Educational Resources Information Center

    Watras, Joseph

    2006-01-01

    From 1932 to 1940, the Progressive Education Association (PEA) conducted its Eight-Year Study. At first, the study appeared to be a poorly funded comparison of two groups of students in secondary schools. During the last four years, as more financial support became available, the Eight-Year Study became a broadly based demonstration of a wide…

  2. DENSE PHASE REBURN COMBUSTION SYSTEM (DPRCS) DEMONSTRATION ON A 154 MWE TANGENTIAL FURNACE: ADDITIONAL AREA OF INTEREST-TO DEVELOP AND DEMONSTRATE AN IN-FURNACE MULTI-POLLUTANT REDUCTION TECHNOLOGY TO REDUCE NOx, SO2 & Hg

    SciTech Connect

    Allen C. Wiley; Steven Castagnero; Geoff Green; Kevin Davis; David White

    2004-03-01

    Semi-dense phase pneumatic delivery and injection of calcium and sodium sorbents, and microfine powdered coal, at various sidewall elevations of an online operating coal-fired power plant, was investigated for the express purpose of developing an in-furnace, economic multi-pollutant reduction methodology for NO{sub x}, SO{sub 2} & Hg. The 154 MWe tangentially-fired furnace that was selected for a full-scale demonstration, was recently retrofitted for NO{sub x} reduction with a high velocity rotating-opposed over-fire air system. The ROFA system, a Mobotec USA technology, has a proven track record of breaking up laminar flow along furnace walls, thereby enhancing the mix of all constituents of combustion. The knowledge gained from injecting sorbents and micronized coal into well mixed combustion gases with significant improvement in particulate retention time, should serve well the goals of an in-furnace multi-pollutant reduction technology; that of reducing back-end cleanup costs on a wide variety of pollutants, on a cost per ton basis, by first accomplishing significant in-furnace reductions of all pollutants.

  3. A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part I.

    ERIC Educational Resources Information Center

    Behr, Shirley K.; And Others

    The interim report presents an evaluation of TADS (Technical Assistance Development System) through case studies of TADS technical assistance to the staffs of two demonstration programs for preschool handicapped children and their families. Purposes of the study included obtaining indepth descriptions of the technical assistance process to…

  4. USFWS demonstration fees

    USGS Publications Warehouse

    Taylor, Jonathan; Vaske, Jerry; Donnelly, Maureen; Shelby, Lori

    2002-01-01

    This study examined National Wildlife Refuge (NWR) visitors' reactions to changes in fees implemented as part of the fee demonstration program. Visitors' evaluations of the fees paid were examined in addition to their beliefs about fees and the fee demonstration program, and the impact of fees paid on their intention to return. All results were analyzed relative to socio-demographic characteristics.

  5. A design study for a medium-scale field demonstration of the viscous barrier technology

    SciTech Connect

    Moridis, G.; Yen, P.; Persoff, P.; Finsterle, S.; Williams, P.; Myer, L.; Pruess, K.

    1996-09-01

    This report is the design study for a medium-scale field demonstration of Lawrence Berkeley National Laboratory`s new subsurface containment technology for waste isolation using a new generation of barrier liquids. The test site is located in central California in a quarry owned by the Los Banos Gravel Company in Los Banos, California, in heterogeneous unsaturated deposits of sand, silt, and -ravel typical of many of the and DOE cleanup sites and particularly analogous to the Hanford site. The coals of the field demonstration are (a) to demonstrate the ability to create a continuous subsurface barrier isolating a medium-scale volume (30 ft long by 30 ft wide by 20 ft deep, i.e. 1/10th to 1/8th the size of a buried tank at the Hanford Reservation) in the subsurface, and (b) to demonstrate the continuity, performance, and integrity of the barrier.

  6. Cryogenic Propellant Storage and Transfer Technology Demonstration: Prephase A Government Point-of-Departure Concept Study

    NASA Technical Reports Server (NTRS)

    Mulqueen, J. A.; Addona, B. M.; Gwaltney, D. A.; Holt, K. A.; Hopkins, R. C.; Matis, J. A.; McRight, P. S.; Popp, C. G.; Sutherlin, S. G.; Thomas, H. D.; Baysinger, M. F.; Maples, C. D.; Capizzo, P. D.; Fabisinski, L. L.; Hornsby, L. S.; Percy, T. K.; Thomas, S. D.

    2012-01-01

    The primary purpose of this study was to define a point-of-departure prephase A mission concept for the cryogenic propellant storage and transfer technology demonstration mission to be conducted by the NASA Office of the Chief Technologist (OCT). The mission concept includes identification of the cryogenic propellant management technologies to be demonstrated, definition of a representative mission timeline, and definition of a viable flight system design concept. The resulting mission concept will serve as a point of departure for evaluating alternative mission concepts and synthesizing the results of industry- defined mission concepts developed under the OCT contracted studies

  7. Case Study for the ARRA-funded GSHP Demonstration at University at Albany

    SciTech Connect

    Liu, Xiaobing; Malhotra, Mini; Xiong, Zeyu

    2015-03-01

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This report highlights the findings of a case study of one of the ARRA-funded GSHP demonstration projects—a distributed GSHP system at a new 500-bed apartment-style student residence hall at the University at Albany. This case study is based on the analysis of detailed design documents, measured performance data, published catalog data of heat pump equipment, and actual construction costs. Simulations with a calibrated computer model are performed for both the demonstrated GSHP system and a baseline heating, ventilation, and airconditioning (HVAC) system to determine the energy savings and other related benefits achieved by the GSHP system. The evaluated performance metrics include the energy efficiency of the heat pump equipment and the overall GSHP system, as well as the pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of the demonstrated GSHP system compared with the baseline HVAC system. This case study also identifies opportunities for improving the operational efficiency of the demonstrated GSHP system.

  8. Expression of Dominant-Negative Thyroid Hormone Receptor Alpha1 in Leydig and Sertoli Cells Demonstrates No Additional Defect Compared with Expression in Sertoli Cells Only

    PubMed Central

    Fumel, Betty; Froment, Pascal; Holzenberger, Martin; Livera, Gabriel; Monget, Philippe; Fouchécourt, Sophie

    2015-01-01

    Background In the testis, thyroid hormone (T3) regulates the number of gametes produced through its action on Sertoli cell proliferation. However, the role of T3 in the regulation of steroidogenesis is still controversial. Methods The TRαAMI knock-in allele allows the generation of transgenic mice expressing a dominant-negative TRα1 (thyroid receptor α1) isoform restricted to specific target cells after Cre-loxP recombination. Here, we introduced this mutant allele in both Sertoli and Leydig cells using a novel aromatase-iCre (ARO-iCre) line that expresses Cre recombinase under control of the human Cyp19(IIa)/aromatase promoter. Findings We showed that loxP recombination induced by this ARO-iCre is restricted to male and female gonads, and is effective in Sertoli and Leydig cells, but not in germ cells. We compared this model with the previous introduction of TRαAMI specifically in Sertoli cells in order to investigate T3 regulation of steroidogenesis. We demonstrated that TRαAMI-ARO males exhibited increased testis weight, increased sperm reserve in adulthood correlated to an increased proliferative index at P3 in vivo, and a loss of T3-response in vitro. Nevertheless, TRαAMI-ARO males showed normal fertility. This phenotype is similar to TRαAMI-SC males. Importantly, plasma testosterone and luteinizing hormone levels, as well as mRNA levels of steroidogenesis enzymes StAR, Cyp11a1 and Cyp17a1 were not affected in TRαAMI-ARO. Conclusions/Significance We concluded that the presence of a mutant TRαAMI allele in both Leydig and Sertoli cells does not accentuate the phenotype in comparison with its presence in Sertoli cells only. This suggests that direct T3 regulation of steroidogenesis through TRα1 is moderate in Leydig cells, and that Sertoli cells are the main target of T3 action in the testis. PMID:25793522

  9. A Study of Library Cooperatives, Networks and Demonstration Projects. Final Report. Volume I: Findings and Recommendations.

    ERIC Educational Resources Information Center

    Patrick, Ruth; And Others

    This study evaluates the impact and effectiveness of the Library Research and Demonstration Program of the Higher Education Act (HEA II-B), and Title III, Interlibrary Cooperation, of the Library Services and Construction Act (LSCA III), USOE administered grant programs to aid in developing and improving library and information services. It…

  10. THE ENGLISH PROGRAM OF THE USOE CURRICULUM STUDY AND DEMONSTRATION CENTER MATERIALS CURRENTLY AVAILABLE.

    ERIC Educational Resources Information Center

    1967

    AFTER FIVE YEARS OF FEDERALLY-SUPPORTED CURRICULUM RESEARCH IN ENGLISH, 14 STUDY CENTERS AND FIVE DEMONSTRATION CENTERS ARE NOW MAKING THE RESULTS OF THEIR WORK AVAILABLE TO THE PUBLIC. THIS PAMPHLET LISTS TITLES OF REPORTS AND INSTRUCTIONAL MATERIALS PREPARED BY THE FOLLOWING CENTERS--(1) CARNEGIE-MELLON UNIVERSITY, (2) TEACHERS COLLEGE, COLUMBIA…

  11. Fire vs. Metal: A Laboratory Study Demonstrating Microbial Responses to Soil Disturbances

    ERIC Educational Resources Information Center

    Stromberger, Mary E.

    2005-01-01

    Incubation studies are traditionally used in soil microbiology laboratory classes to demonstrate microbial respiration and N mineralization-immobilization processes. Sometimes these exercises are done to calculate a N balance in N fertilizer-amended soils. However, examining microbial responses to environmental perturbations would appeal to soil…

  12. ESEA Title I Allocation Policy: Demonstration Study. Cost Analysis; Planning Year 1975-76.

    ERIC Educational Resources Information Center

    Sjogren, Jane Huseby; Ames, Richard

    This report describes resource use and program costs of the Elementary Secondary Education Act Title I programs in thirteen demonstration local education agencies (LEAs) during 1975-76. This analysis provides a baseline for comparing data from later years when waivers were granted for compliance with Title I guidelines. This study is concerned…

  13. Study of wood plastic composite in the presence of nitrogen containing additives

    NASA Astrophysics Data System (ADS)

    Ali, K. M. Idriss; Khan, Mubarak A.; Husain, M. M.

    1994-10-01

    Effect of nitrogen-containing additives in the study of wood plastic composites of MMA with simul and mango wood of Bangladesh has been investigated. Nine different additives were used and the additives containing carboamide group induce the highest tensile strength to the composite.

  14. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives

    NASA Astrophysics Data System (ADS)

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-11-01

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L-1, or to Vc at a concentration less than 300 mg L-1, there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L-1 of ZnO NPs and 300 mg L-1 of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the

  15. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives.

    PubMed

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-12-21

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L(-1), or to Vc at a concentration less than 300 mg L(-1), there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L(-1) of ZnO NPs and 300 mg L(-1) of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.

  16. Study on automatic optical element addition or deletion in lens optimization

    NASA Astrophysics Data System (ADS)

    Cheng, Xuemin; Wang, Yongtian; Hao, Qun

    2002-09-01

    Two lens form parameters, quantifying the symmetry of the optical system and the optical power distribution among the individual lens elements, are used as the criteria for automatic element addition or deletion in lens optimization. The scheme based on the criteria is described in this paper. Design examples are provided, which demonstrate that the scheme is practicable.

  17. Mechanistic and computational studies of the atom transfer radical addition of CCl4 to styrene catalyzed by copper homoscorpionate complexes.

    PubMed

    Muñoz-Molina, José María; Sameera, W M C; Álvarez, Eleuterio; Maseras, Feliu; Belderrain, Tomás R; Pérez, Pedro J

    2011-03-21

    Experimental as well as theoretical studies have been carried out with the aim of elucidating the mechanism of the atom transfer radical addition (ATRA) of styrene and carbon tetrachloride with a Tp(x)Cu(NCMe) complex as the catalyst precursor (Tp(x) = hydrotrispyrazolyl-borate ligand). The studies shown herein demonstrate the effect of different variables in the kinetic behavior. A mechanistic proposal consistent with theoretical and experimental data is presented.

  18. Genetic assessment of additional endophenotypes from the Consortium on the Genetics of Schizophrenia Family Study.

    PubMed

    Greenwood, Tiffany A; Lazzeroni, Laura C; Calkins, Monica E; Freedman, Robert; Green, Michael F; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Braff, David L

    2016-01-01

    The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) has previously reported our efforts to characterize the genetic architecture of 12 primary endophenotypes for schizophrenia. We now report the characterization of 13 additional measures derived from the same endophenotype test paradigms in the COGS-1 families. Nine of the measures were found to discriminate between schizophrenia patients and controls, were significantly heritable (31 to 62%), and were sufficiently independent of previously assessed endophenotypes, demonstrating utility as additional endophenotypes. Genotyping via a custom array of 1536 SNPs from 94 candidate genes identified associations for CTNNA2, ERBB4, GRID1, GRID2, GRIK3, GRIK4, GRIN2B, NOS1AP, NRG1, and RELN across multiple endophenotypes. An experiment-wide p value of 0.003 suggested that the associations across all SNPs and endophenotypes collectively exceeded chance. Linkage analyses performed using a genome-wide SNP array further identified significant or suggestive linkage for six of the candidate endophenotypes, with several genes of interest located beneath the linkage peaks (e.g., CSMD1, DISC1, DLGAP2, GRIK2, GRIN3A, and SLC6A3). While the partial convergence of the association and linkage likely reflects differences in density of gene coverage provided by the distinct genotyping platforms, it is also likely an indication of the differential contribution of rare and common variants for some genes and methodological differences in detection ability. Still, many of the genes implicated by COGS through endophenotypes have been identified by independent studies of common, rare, and de novo variation in schizophrenia, all converging on a functional genetic network related to glutamatergic neurotransmission that warrants further investigation. PMID:26597662

  19. Genetic assessment of additional endophenotypes from the Consortium on the Genetics of Schizophrenia Family Study.

    PubMed

    Greenwood, Tiffany A; Lazzeroni, Laura C; Calkins, Monica E; Freedman, Robert; Green, Michael F; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Braff, David L

    2016-01-01

    The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) has previously reported our efforts to characterize the genetic architecture of 12 primary endophenotypes for schizophrenia. We now report the characterization of 13 additional measures derived from the same endophenotype test paradigms in the COGS-1 families. Nine of the measures were found to discriminate between schizophrenia patients and controls, were significantly heritable (31 to 62%), and were sufficiently independent of previously assessed endophenotypes, demonstrating utility as additional endophenotypes. Genotyping via a custom array of 1536 SNPs from 94 candidate genes identified associations for CTNNA2, ERBB4, GRID1, GRID2, GRIK3, GRIK4, GRIN2B, NOS1AP, NRG1, and RELN across multiple endophenotypes. An experiment-wide p value of 0.003 suggested that the associations across all SNPs and endophenotypes collectively exceeded chance. Linkage analyses performed using a genome-wide SNP array further identified significant or suggestive linkage for six of the candidate endophenotypes, with several genes of interest located beneath the linkage peaks (e.g., CSMD1, DISC1, DLGAP2, GRIK2, GRIN3A, and SLC6A3). While the partial convergence of the association and linkage likely reflects differences in density of gene coverage provided by the distinct genotyping platforms, it is also likely an indication of the differential contribution of rare and common variants for some genes and methodological differences in detection ability. Still, many of the genes implicated by COGS through endophenotypes have been identified by independent studies of common, rare, and de novo variation in schizophrenia, all converging on a functional genetic network related to glutamatergic neurotransmission that warrants further investigation.

  20. Case study for ARRA-funded ground-source heat pump (GSHP) demonstration at Oakland University

    SciTech Connect

    Im, Piljae; Liu, Xiaobing

    2015-09-01

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This paper highlights the findings of a case study of one of the ARRA-funded GSHP demonstration projects, a ground-source variable refrigerant flow (GS-VRF) system installed at the Human Health Building at Oakland University in Rochester, Michigan. This case study is based on the analysis of measured performance data, maintenance records, construction costs, and simulations of the energy consumption of conventional central heating, ventilation, and air-conditioning (HVAC) systems providing the same level of space conditioning as the demonstrated GS-VRF system. The evaluated performance metrics include the energy efficiency of the heat pump equipment and the overall GS-VRF system, pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of the GS-VRF system compared with conventional HVAC systems. This case study also identified opportunities for reducing uncertainties in the performance evaluation, improving the operational efficiency, and reducing the installed cost of similar GSHP systems in the future.

  1. Synthesis, Characterization, Molecular Modeling, and DNA Interaction Studies of Copper Complex Containing Food Additive Carmoisine Dye.

    PubMed

    Shahabadi, Nahid; Akbari, Alireza; Jamshidbeigi, Mina; Khodarahmi, Reza

    2016-06-01

    A copper complex of carmoisine dye; [Cu(carmoisine)2(H2O)2]; was synthesized and characterized by using physico-chemical and spectroscopic methods. The binding of this complex with calf thymus (ct) DNA was investigated by circular dichroism, absorption studies, emission spectroscopy, and viscosity measurements. UV-vis results confirmed that the Cu complex interacted with DNA to form a ground-state complex and the observed binding constant (2× 10(4) M(-1)) is more in keeping with the groove bindings with DNA. Furthermore, the viscosity measurement result showed that the addition of complex causes no significant change on DNA viscosity and it indicated that the intercalation mode is ruled out. The thermodynamic parameters are calculated by van't Hoff equation, which demonstrated that hydrogen bonds and van der Waals interactions played major roles in the reaction. The results of circular dichroism (CD) suggested that the complex can change the conformation of DNA from B-like form toward A-like conformation. The cytotoxicity studies of the carmoisine dye and its copper complex indicated that both of them had anticancer effects on HT-29 (colon cancer) cell line and they may be new candidates for treatment of the colon cancer.

  2. Synthesis, Characterization, Molecular Modeling, and DNA Interaction Studies of Copper Complex Containing Food Additive Carmoisine Dye.

    PubMed

    Shahabadi, Nahid; Akbari, Alireza; Jamshidbeigi, Mina; Khodarahmi, Reza

    2016-06-01

    A copper complex of carmoisine dye; [Cu(carmoisine)2(H2O)2]; was synthesized and characterized by using physico-chemical and spectroscopic methods. The binding of this complex with calf thymus (ct) DNA was investigated by circular dichroism, absorption studies, emission spectroscopy, and viscosity measurements. UV-vis results confirmed that the Cu complex interacted with DNA to form a ground-state complex and the observed binding constant (2× 10(4) M(-1)) is more in keeping with the groove bindings with DNA. Furthermore, the viscosity measurement result showed that the addition of complex causes no significant change on DNA viscosity and it indicated that the intercalation mode is ruled out. The thermodynamic parameters are calculated by van't Hoff equation, which demonstrated that hydrogen bonds and van der Waals interactions played major roles in the reaction. The results of circular dichroism (CD) suggested that the complex can change the conformation of DNA from B-like form toward A-like conformation. The cytotoxicity studies of the carmoisine dye and its copper complex indicated that both of them had anticancer effects on HT-29 (colon cancer) cell line and they may be new candidates for treatment of the colon cancer. PMID:27152751

  3. Pharmacodynamic properties of faropenem demonstrated by studies of time-kill kinetics and postantibiotic effect.

    PubMed

    Boswell, F J; Andrews, J M; Wise, R

    1997-03-01

    The pharmacodynamic properties of faropenem, a new oral penem antibiotic, were investigated by studying time-kill kinetics and postantibiotic effect. Time-kill kinetics were employed against strains of Bacteroides fragilis, Escherichia coli, Staphylococcus aureus, Haemophilus influenzae, Moraxella catarrhalis and Streptococcus pyogenes. The postantibiotic effects of faropenem were studied using strains of E. coli, S. aureus, H. influenzae and Streptococcus pneumoniae. The time-kill kinetic data demonstrated that faropenem has bactericidal activity. Faropenem exhibited a significant postantibiotic effect against all strains except H. influenzae. PMID:9096193

  4. Elder Mediation in Theory and Practice: Study Results From a National Caregiver Mediation Demonstration Project

    PubMed Central

    Crampton, Alexandra

    2014-01-01

    Mediation is a process through which a third party facilitates discussion among disputing parties to help them identify interests and ideally reach an amicable solution. Elder mediation is a growing subspecialty to address conflicts involving older adults, primarily involving caregiving or finances. Mediation is theorized to empower participants but critics argue that it can exacerbate power imbalances among parties and coerce consensus. These contested claims are examined through study of a national caregiver mediation demonstration project. Study implications underscore the importance of gerontological social work expertise to ensure the empowerment of vulnerable older adults in mediation sessions. PMID:23767767

  5. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  6. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  7. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  8. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  9. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  10. Initial Development and Pilot Study Design of Interactive Lecture Demonstrations for ASTRO 101

    NASA Astrophysics Data System (ADS)

    Schwortz, Andria C.; French, D. A; Gutierrez, Joseph V; Sanchez, Richard L; Slater, Timothy F.; Tatge, Coty

    2014-06-01

    Interactive lecture demonstrations (ILDs) have repeatedly shown to be effective tools for improving student achievement in the context of learning physics. As a first step toward systematic development of interactive lecture demonstrations in ASTRO 101, the introductory astronomy survey course, a systematic review of education research, describing educational computer simulations (ECSs) reveals that initial development requires a targeted study of how ASTRO 101 students respond to ECSs in the non-science majoring undergraduate lecture setting. In this project we have adopted the process by which ILDs were designed, pilot-tested, and successfully implemented in the context of physics teaching (Sokoloff & Thornton, 1997; Sokoloff & Thornton, 2004). We have designed the initial pilot-test set of ASTRO 101 ILD instructional materials relying heavily on ECSs. Both an instructor’s manual and a preliminary classroom-ready student workbook have been developed, and we are implementing a pilot study to explore their effectiveness in communicating scientific content, and the extent to which they might enhance students’ knowledge of and perception about astronomy and science in general. The study design uses a pre-/post-test quasi-experimental study design measuring students’ normalized gain scores, calculated as per Hake (1998) and Prather (2009), using a slightly modified version of S. Slater’s (2011) Test Of Astronomy STandards TOAST combined with other instruments. The results of this initial study will guide the iterative development of ASTRO 101 ILDs that are intended to both be effective at enhancing student achievement and easy for instructors to successfully implement.

  11. Granular ferric hydroxide adsorbent for phosphate removal: demonstration preparation and field study.

    PubMed

    Zhao, Bei; Zhang, Yu; Dou, Xiaomin; Yuan, Hongying; Yang, Min

    2015-01-01

    Ferric hydroxide (FHO), which has high phosphate adsorption capacity, was prepared by precipitation at industrial scale and then fabricated via the drum granulation method with cross-linked poly(vinyl alcohol) as the binder. The optimum binder/FHO powder ratio was 0.6 for producing a granular adsorbent with a high phosphate adsorption capacity and stability. The Langmuir maximum adsorption capacities of powder and granular FHOs were 74.07 mg g⁻¹ and 56.18 mg g(-1) at pH 7.0 ± 0.2, respectively, which were higher than those of other reported phosphate adsorbents under neutral or acidic conditions. Phosphate-loaded granular FHO could be regenerated by NaOH solution. Columns containing the granular FHO were used for phosphate removal from ozonated secondary effluents of a municipal wastewater treatment plant at space velocity (SV) of 2 and 5 h⁻¹. During more than 2 months' operation, the average removal percentage of PO(4)(3-) was more than 90% and the turbidity and concentration of CODMn in the effluents were lower than in the influents. In addition, energy dispersive X-ray results suggested that active sites inside the granular FHO were available for phosphate removal. The results demonstrated that granular FHO can be applied as an assist technology for phosphate removal from secondary effluents.

  12. Demonstrating the synergy of synthetic, mechanistic, and computational studies in a regioselective aniline synthesis.

    PubMed

    Davies, Ian W; Marcoux, Jean-François; Kuethe, Jeffery T; Lankshear, Michael D; Taylor, Jeremy D O; Tsou, Nancy; Dormer, Peter G; Hughes, David L; Houk, K N; Guner, Vildan

    2004-02-20

    Tri- and tetrasubstituted anilines are formed in good to excellent yields by the addition of ketones to vinamidinium salts (up to 98%). The reaction proceeds via the formation of dienone intermediates, which react to form an enamine with the liberated amine. In the case of a nitro, or dimethylaminomethylene substituent, the enamines undergo a facile electrocyclic ring closure to form a cyclohexadiene, which goes on to form anilines with a high degree of selectivity (up to 50:1) with a minor competing pathway proceeding via the enol providing phenols. Competition experiments using isotopic substitution reveal that the rate determining step en route to dienone is enol/enolate addition to the vinamidinium salt, which is characterized by an inverse secondary isotope effect (k(H/D) 0.7-0.9). Computational studies have been used to provide a framework for understanding the reaction pathway. The original proposal for a [1,5]-H shift was ruled out on the basis of the calculations, which did not locate a thermally accessible transition state. The minimum energy conformation of the enamine is such that a facile electrocyclic ring closure is ensured, which is corroborated by the experimental studies. A framework for understanding the reaction pathway is presented. PMID:14961684

  13. A study of hazardous air pollutants at the Tidd PFBC Demonstration Plant

    SciTech Connect

    1994-10-01

    The US Department of Energy (DOE) Clean Coal Technology (CCD Program is a joint effort between government and industry to develop a new generation of coal utilization processes. In 1986, the Ohio Power Company, a subsidiary of American Electric Power (AEP), was awarded cofunding through the CCT program for the Tidd Pressure Fluidized Bed Combustor (PFBC) Demonstration Plant located in Brilliant, Ohio. The Tidd PFBC unit began operation in 1990 and was later selected as a test site for an advanced particle filtration (APF) system designed for hot gas particulate removal. The APF system was sponsored by the DOE Morgantown Energy Technology Center (METC) through their Hot Gas Cleanup Research and Development Program. A complementary goal of the DOE CCT and METC R&D programs has always been to demonstrate the environmental acceptability of these emerging technologies. The Clean Air Act Amendments of 1990 (CAAA) have focused that commitment toward evaluating the fate of hazardous air pollutants (HAPs) associated with advanced coal-based and hot gas cleanup technologies. Radian Corporation was contacted by AEP to perform this assessment of HAPs at the Tidd PFBC demonstration plant. The objective of this study is to assess the major input, process, and emission streams at Plant Tidd for the HAPs identified in Title III of the CAAA. Four flue gas stream locations were tested: ESP inlet, ESP outlet, APF inlet, and APF outlet. Other process streams sampled were raw coal, coal paste, sorbent, bed ash, cyclone ash, individual ESP hopper ash, APF ash, and service water. Samples were analyzed for trace elements, minor and major elements, anions, volatile organic compounds, dioxin/furan compounds, ammonia, cyanide, formaldehyde, and semivolatile organic compounds. The particle size distribution in the ESP inlet and outlet gas streams and collected ash from individual ESP hoppers was also determined.

  14. Studies of jet fuel additives using the quartz crystal microbalance and pressure monitoring at 140 C

    SciTech Connect

    Zabarnick, S.; Grinstead, R.R. . Aerospace Mechanics Div./KL-463)

    1994-11-01

    Recent advances in jet aircraft and engine technology have placed an ever increasing heat load on the aircraft. The bulk of this excess heat is absorbed by the aircraft fuel, as jet fuel is used as the primary coolant for the numerous heat sources. The quartz crystal microbalance (QCM) and pressure monitoring are used for the evaluation of jet fuel additives for the improvement of jet fuel thermal stability. The mechanisms of additive behavior are determined by measuring the time-dependent deposition with the QCM and oxidation by pressure measurements. Studies at various additive concentrations permits the determination of optimum additive concentrations. Additive packages made of mixtures of antioxidants, detergent/dispersants, and metal deactivators are shown to yield good improvements in thermal stability over a wide range of jet fuel types.

  15. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1984-01-01

    Procedures for two demonstrations are presented. The first is a demonstration of chemiluminescence. The second is a demonstration using a secondary battery constructed from common household articles. (JN)

  16. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1978-01-01

    Presents the following chemistry lecture demonstrations and experiments: (1) a versatile kinetic demonstration; (2) the Bakelite Demonstration; (3) applying Beer's law; and (4) entropy calculations. (HM)

  17. Chemostat Studies of TCE-Dehalogenating Anaerobic Consortia under Excess and Limited Electron Donor Addition

    NASA Astrophysics Data System (ADS)

    Semprini, L.; Azizian, M.; Green, J.; Mayer-Blackwell, K.; Spormann, A. M.

    2015-12-01

    Two cultures - the Victoria Strain (VS) and the Evanite Strain (EV), enriched with the organohalide respiring bacteria Dehalococcoides mccartyi - were grown in chemostats for more than 4 years at a mean cell residence time of 50 days. The slow doubling rate represents growth likely experienced in the subsurface. The chemostats were fed formate as an electron donor and trichloroethene (TCE) as the terminal electron acceptor. Under excess formate conditions, stable operation was observed with respect to TCE transformation, steady-state hydrogen (H2) concentrations (40 nM), and the structure of the dehalogenating community. Both cultures completely transformed TCE to ethene, with minor amounts of vinyl chloride (VC) observed, along with acetate formation. When formate was limited, TCE was transformed incompletely to ethene (40-60%) and VC (60- 40%), and H2 concentrations ranged from 1 to 3 nM. The acetate concentration dropped below detection. Batch kinetic studies of TCE transformation with chemostat harvested cells found transformation rates of c-DCE and VC were greatly reduced when the cells were grown with limited formate. Upon increasing formate addition to the chemostats, from limited to excess, essentially complete transformation of TCE to ethene was achieved. The increase in formate was associated with an increase in H2 concentration and the production of acetate. Results of batch kinetic tests showed increases in transformation rates for TCE and c-DCE by factors of 3.5 and 2.5, respectively, while VC rates increased by factors of 33 to 500, over a six month period. Molecular analysis of chemostat samples is being performed to quantify the changes in copy numbers of reductase genes and to determine whether shifts in the strains of Dehalococcoides mccartyi where responsible for the observed rate increases. The results demonstrate the importance of electron donor supply for successful in-situ remediation.

  18. A thorough QTc study demonstrates that olmesartan medoxomil does not prolong the QTc interval

    PubMed Central

    Matsushima, Nobuko; O'Reilly, Terry E.; Lee, James

    2015-01-01

    Abstract Two studies (ROADMAP and ORIENT) evaluating the renoprotective effects of olmesartan medoxomil (OM) in patients with type 2 diabetes suggested OM is associated with increased cardiovascular mortality. We conducted a thorough QTc study to evaluate the effects of OM on cardiac repolarization. A randomized, double‐blind, phase 1 study was conducted per E14 Guidance to assess the effects of single doses of OM therapeutic dose (40 mg), OM supratherapeutic dose (160 mg), placebo, or moxifloxacin (MOXI; 400 mg) on QTc in 56 healthy subjects. The primary endpoint was the baseline‐adjusted, placebo‐corrected QTc interval using Fridericia's formula (ΔΔQTcF) for OM and MOXI. Assay sensitivity was concluded if lower limit of 1‐sided 95%CI > 5 milliseconds of ΔΔQTcF for MOXI. No threshold pharmacologic effect for OM was concluded if upper limit of 1‐sided 95%CI <10 milliseconds for ΔΔQTcF at any timepoint. Pharmacokinetics, ECGs, and safety were assessed. Assay sensitivity was demonstrated. The largest upper limit of the 1‐sided 95%CI for ΔΔQTcF was <5 milliseconds for OM. No clinically significant changes were observed in ECGs. Pharmacokinetics and safety profile were consistent with previous data. Therapeutic and supratherapeutic OM doses had no clinically significant effect on cardiac repolarization and were well tolerated. PMID:26239632

  19. Baca geothermal demonstration project baseline ecosystem studies of cooling tower emission effects

    SciTech Connect

    Leitner, P.; Osterling, R.; Price, D.; Westermeier, J.

    1981-03-01

    Results of baseline studies for boron, arsenic, mercury, and fluorine in vegetation and soil near the Baca Geothermal Demonstration Power Plant are provided for the 1980 sampling season. Preliminary results of visual vegetation assessments and population density studies of soil invertebrate fauna are also provided. Foliage samples were collected for chemical analysis on a total of 17 plots on 5 transects. Two to five plant species were sampled at each plot. Samples were collected in June-July and September. Soil samples were collected at each plot during September. Visual vegetation inspections were conducted along each transect. Eighty-eight soil samples were collected for soil invertebrate studies. Boron, arsenic, mercury, and fluorine levels in vegetation were within normal range for natural vegetation and crops. Concentrations of soil arsenic and mercury were comparable to foliage concentrations. Boron concentrations were lower in soil than in foliage, whereas soil fluorine concentrations were considerably higher than foliage concentrations. With the exception of heavy insect infestations in June-July, no vegetation abnormalities were noted. Preliminary soil invertebrate analysis indicated an overall arthropod density of approximately 100,000/m/sup 2/ which appears within the normal range encountered in forest and meadow soil.

  20. Bioremediation demonstration on Kwajalein Island: Site characterization and on-site biotreatability studies

    SciTech Connect

    Siegrist, R.L.; Korte, N.E.; Pickering, D.A. ); Phelps, T.J. )

    1991-09-01

    An environmental study was conducted during February 1991 on Kwajalein Island, a US Army Kwajalein Atoll (USAKA) Base in the Republic of the Marshall Islands (RMI). This study was undertaken for the US Department of Energy (DOE) Hazardous Waste Remedial Actions Program (HAZWRAP) acting in behalf of USAKA. The purpose of the study was to determine if selected locations for new construction on Kwajalein Island were contaminated by petroleum hydrocarbons as suspected and, if so, whether bioremediation appeared to be a feasible technology for environmental restoration. Two different sites were evaluated: (1) the site planned freshwater production facility and (2) a site adjacent to an aboveground diesel fuel storage tank. Within the proposed construction zone for the freshwater production facility (a.k.a desalination plant), total petroleum hydrocarbons (TPH) where either absent or at low levels. Characterization data for another potential construction site adjacent to an aboveground diesel fuel storage tank southeast of the old diesel power plant revealed high concentrations of diesel fuel in the soil and groundwater beneath the site. Results of this investigation indicate that there are petroleum-contaminated soils on Kwajalein Island and bioremediation appears to be a viable environmental restoration technique. Further experimentation and field demonstration are required to determine the design and operating conditions that provide for optimum biodegradation and restoration of the petroleum-contaminated soils. 17 refs., 7 figs., 26 figs.

  1. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Details three demonstrations for use in chemistry classrooms. Includes: "A Demonstration of Corrosion by Differential Aeration"; "A Simple Demonstration of the Activation Energy Concept"; and "A Boiling Demonstration at Room Temperature." Each description includes equipment, materials, and methods. (CW)

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Describes two chemistry demonstrations including a demonstration of chemical inhibition and "The Rayleigh Fountain" which demonstrates the polarity of the water molecule. Provides instructions and explanations for each demonstration. (CW)

  3. Evaluating Drugs and Food Additives for Public Use: A Case Studies Approach.

    ERIC Educational Resources Information Center

    Merritt, Sheridan V.

    1980-01-01

    Described is a case study used in an introductory college biology course that provides a basis for generating debate on an issue concerning the regulation of controversial food additives and prescription drugs. The case study contained within this article deals with drug screening, specifically with information related to thalidomide. (CS)

  4. RCRA permit modifications and the functional equivalency demonstration: A case study

    SciTech Connect

    Kinker, J.; Lyon, W.; Carnes, R.; Loehr, C.; Elsberry, K.; Garcia, P.

    1996-05-01

    Hazardous waste operating permits issued under the Resource Conservation and Recovery Act (RCRA) often impose requirements, typically by reference to the original permit application, that specific components and equipment be used. Consequently, changing these items, even for the purpose of routine maintenance, may first require that the owner/operator request a potentially time-consuming and costly permit modification. However, the owner/operator may demonstrate that a modification is not required because the planned changes are functionally equivalent, as defined by RCRA, to the original specifications embodied by the permit. The Controlled-Air Incinerator at Los Alamos National Laboratory is scheduled for maintenance and improvements that involve replacement of components. The incinerator`s carbon adsorption unit/high efficiency particulate air filtration system, in particular, was redesigned to improve reliability and minimize maintenance. A study was performed to determine whether the redesigned unit would qualify as functionally equivalent to the original component. in performing this study, the following steps were taken: (a) the key performance factors were identified; (b) performance data describing the existing unit were obtained; (c) performance of both the existing and redesigned units was simulated; and (d) the performance data were compared to ascertain whether the components could qualify as functionally equivalent.

  5. Study raises questions about measurement of 'additionality,'or maintaining domestic health spending amid foreign donations.

    PubMed

    Garg, Charu C; Evans, David B; Dmytraczenko, Tania; Izazola-Licea, José-Antonio; Tangcharoensathien, Viroj; Ejeder, Tessa Tan-Torres

    2012-02-01

    Donor nations and philanthropic organizations increasingly require that funds provided for a specific health priority such as HIV should supplement domestic spending on that priority-a concept known as "additionality." We investigated the "additionality" concept using data from Honduras, Rwanda, and Thailand, and we found that the three countries increased funding for HIV in response to increased donor funding. In contrast, the study revealed that donors, faced with increased Global Fund resources for HIV in certain countries, tended to decrease their funding for HIV or shift funds for use in non-HIV health areas. More broadly, we found many problems in the measurement and interpretation of additionality. These findings suggest that it would be preferable for donors and countries to agree on how best to use available domestic and external funds to improve population health, and to develop better means of tracking outcomes, than to try to develop more sophisticated methods to track additionality.

  6. SHEEP MOUNTAIN WILDERNESS STUDY AREA AND CUCAMONGA WILDERNESS AND ADDITIONS, CALIFORNIA.

    USGS Publications Warehouse

    Evans, James G.; Ridenour, James

    1984-01-01

    The Sheep Mountain Wilderness Study Area and Cucamonga Wilderness and additions encompass approximately 104 sq mi of the eastern San Gabriel Mountains, Los Angeles and San Bernardino Counties, California. A mineral survey indicates areas of probable and substantiated tungsten and gold resource potential for parts of the Sheep Mountain Wilderness Study Area and an area of probable tungsten and gold resource potential in the Cucamonga Wilderness and additions. The rugged topography, withdrawal of lands from mineral entry to protect watershed, and restricted entry of lands during periods of high fire danger have contributed to the continuing decline in mineral exploration. The geologic setting precludes the presence of energy resources.

  7. A mechanistic study of the addition of alcohol to a five-membered ring silene via a photochemical reaction.

    PubMed

    Su, Ming-Der

    2016-03-21

    The mechanism for the photochemical rearrangement of a cyclic divinyldisilane (1-Si) in its first excited state ((1)π → (1)π*) is determined using the CAS/6-311G(d) and MP2-CAS/6-311++G(3df,3pd) levels of theory. The photoproduct, a cyclic silene, reacts with various alcohols to yield a mixture of cis- and trans- adducts. The two reaction pathways are denoted as the cis- addition path (path A) and the trans-addition path (path B). These model studies demonstrate that conical intersections play a crucial role in the photo-rearrangements of cyclic divinyldisilanes. The theoretical evidence also demonstrates that the addition of alcohol to a cyclic divinyldisilane follows the reaction path: cyclic divinyldisilane → Franck-Condon region → conical intersection → photoproduct (cyclic silene) → local intermediate (with alcohol) → transition state → cis- or trans-adduct. The theoretical studies demonstrate that the steric effects as well as the concentrations of CH3OH must have a dominant role in determining the yields of the final adducts by stereochemistry. The same mechanism for the carbon derivative (1-C) is also considered in this work. However, the theoretical results indicate that 1-C does not undergo a methanol addition reaction via the photochemical reaction pathway, since its energy of conical intersection (S1/S0-CI-C) is more than that of its FC (FC-C). The reason for these phenomena could be that the atomic radius of carbon is much smaller than that of silicon (77 and 117 pm, respectively). As a result, the conformation for 1-C is more sterically congested than that for 1-Si, along the 1,3-silyl-migration pathway. PMID:26928893

  8. Influence of Polarization on Carbohydrate Hydration: A Comparative Study Using Additive and Polarizable Force Fields.

    PubMed

    Pandey, Poonam; Mallajosyula, Sairam S

    2016-07-14

    Carbohydrates are known to closely modulate their surrounding solvent structures and influence solvation dynamics. Spectroscopic investigations studying far-IR regions (below 1000 cm(-1)) have observed spectral shifts in the libration band (around 600 cm(-1)) of water in the presence of monosaccharides and polysaccharides. In this paper, we use molecular dynamics simulations to gain atomistic insight into carbohydrate-water interactions and to specifically highlight the differences between additive (nonpolarizable) and polarizable simulations. A total of six monosaccharide systems, α and β anomers of glucose, galactose, and mannose, were studied using additive and polarizable Chemistry at HARvard Macromolecular Mechanics (CHARMM) carbohydrate force fields. Solvents were modeled using three additive water models TIP3P, TIP4P, and TIP5P in additive simulations and polarizable water model SWM4 in polarizable simulations. The presence of carbohydrate has a significant effect on the microscopic water structure, with the effects being pronounced for proximal water molecules. Notably, disruption of the tetrahedral arrangement of proximal water molecules was observed due to the formation of strong carbohydrate-water hydrogen bonds in both additive and polarizable simulations. However, the inclusion of polarization resulted in significant water-bridge occupancies, improved ordered water structures (tetrahedral order parameter), and longer carbohydrate-water H-bond correlations as compared to those for additive simulations. Additionally, polarizable simulations also allowed the calculation of power spectra from the dipole-dipole autocorrelation function, which corresponds to the IR spectra. From the power spectra, we could identify spectral signatures differentiating the proximal and bulk water structures, which could not be captured from additive simulations. PMID:27266974

  9. Proximity Operations Nano-Satellite Flight Demonstration (PONSFD) Rendezvous Proximity Operations Design and Trade Studies

    NASA Astrophysics Data System (ADS)

    Griesbach, J.; Westphal, J. J.; Roscoe, C.; Hawes, D. R.; Carrico, J. P.

    2013-09-01

    The Proximity Operations Nano-Satellite Flight Demonstration (PONSFD) program is to demonstrate rendezvous proximity operations (RPO), formation flying, and docking with a pair of 3U CubeSats. The program is sponsored by NASA Ames via the Office of the Chief Technologist (OCT) in support of its Small Spacecraft Technology Program (SSTP). The goal of the mission is to demonstrate complex RPO and docking operations with a pair of low-cost 3U CubeSat satellites using passive navigation sensors. The program encompasses the entire system evolution including system design, acquisition, satellite construction, launch, mission operations, and final disposal. The satellite is scheduled for launch in Fall 2015 with a 1-year mission lifetime. This paper provides a brief mission overview but will then focus on the current design and driving trade study results for the RPO mission specific processor and relevant ground software. The current design involves multiple on-board processors, each specifically tasked with providing mission critical capabilities. These capabilities range from attitude determination and control to image processing. The RPO system processor is responsible for absolute and relative navigation, maneuver planning, attitude commanding, and abort monitoring for mission safety. A low power processor running a Linux operating system has been selected for implementation. Navigation is one of the RPO processor's key tasks. This entails processing data obtained from the on-board GPS unit as well as the on-board imaging sensors. To do this, Kalman filters will be hosted on the processor to ingest and process measurements for maintenance of position and velocity estimates with associated uncertainties. While each satellite carries a GPS unit, it will be used sparsely to conserve power. As such, absolute navigation will mainly consist of propagating past known states, and relative navigation will be considered to be of greater importance. For relative observations

  10. Competencies Demonstrated by Municipal Employees during Adaptation to Climate Change: A Pilot Study

    ERIC Educational Resources Information Center

    Pruneau, Diane; Kerry, Jackie; Blain, Sylvie; Evichnevetski, Evgueni; Deguire, Paul; Barbier, Pierre-Yves; Freiman, Viktor; Therrien, Jimmy; Langis, Joanne; Lang, Mathieu

    2013-01-01

    Since coastal communities are already subjected to the impacts of climate change, adaptation has become a necessity. This article presents competencies demonstrated by Canadian municipal employees during an adaptation process to sea level rise. To adapt, the participants demonstrated the following competencies: problem solving (highlighting…

  11. Dry Storage Demonstration for High-Burnup Spent Nuclear Fuel-Feasibility Study

    SciTech Connect

    McKinnon, Mikal A. ); Cunningham, Mitchel E. )

    2003-09-09

    Initially, casks for dry storage of spent fuel were licensed for assembly-average burnup of about 35 GWd/MTU. Over the last two decades, the discharge burnup of fuel has increased steadily and now exceeds 45 GWd/MTU. With spent fuel burnups approaching the licensing limits (peak rod burnup of 62 GWd/MTU for pressurized water reactor fuel) and some lead test assemblies being burned beyond this limit, a need for a confirmatory dry storage demonstration program was first identified after the publication in May 1999 of the U.S. Nuclear Regulatory Commissions (NRC) Interim Staff Guidance 11 (ISG-11). With the publication in July 2002 of the second revision of ISG-11, the desirability for such a program further increased to obtain confirmatory data about the potential changes in cladding mechanical properties induced by dry storage, which would have implications to the transportation, handling, and disposal of high-burnup spent fuel. While dry storage licenses have kept pace with reactor discharge burnups, transportation licenses have not and are considered on a case by case basis. Therefore, this feasibility study was performed to examine the options available for conducting a confirmatory experimental program supporting the dry storage, transportation, and disposal of spent nuclear fuel with burnups well in excess of 45 GWd/MTU.

  12. Study of the Order-to-Chaos transition in 174W with the AGATA-Demonstrator

    NASA Astrophysics Data System (ADS)

    Vandone, V.; Leoni, S.; Assanelli, D.; Bottoni, S.; Bracco, A.; Camera, F.; Crespi, F. C. L.; Giaz, A.; Nicolini, R.; Pellegri, L.; Benzoni, G.; Blasi, N.; Boiano, C.; Brambilla, S.; Million, B.; Wieland, O.; Corsi, A.; Bortolato, D.; Calore, E.; Gottardo, A.; Napoli, D. R.; Sahin, E.; Valiente Dobon, J. J.; Bazzacco, D.; Bellato, M.; Farnea, E.; Lunardi, S.; Mengoni, D.; Michelagnoli, C.; Montanari, D.; Recchia, F.; Ur, C. A.; Gadea, A.; Hüyük, T.; Cieplicka, N.; Maj, A.; Kmiecik, M.; Atac, A.; Akkoyun, S.; Kaskas, A.; Nyberg, J.; Söderström, P. A.; AGATA Collaboration

    2012-05-01

    The transition between order and chaos is studied in the warm rotating nucleus 174W by γ-spectroscopy, focusing on the conservation of selection rules of the K quantum number with the excitation energy, where K is the projection of the total angular momentum on the symmetry axis. The 174W nucleus was populated by the fusion-evaporation reaction of 80Ti (at 217 MeV) on a 128Te backed target. The measurement was performed in July 2010 at Legnaro National Laboratories of INFN using the AGATA Demonstrator HPGe-array coupled to an array of 27 BaF2 scintillators, named Helena. The data analysis concentrates on γ-γ coincidence matrices selecting the γ-decay flow populating low-K and high-K structures. By a statistical fluctuation analysis the total number of low-K and high-K bands can be evaluated as a function of excitation energy. Comparisons with cranked shell model calculations at finite temperature are used to extract information on the onset of the chaotic regime as a function of excitation energy.

  13. Cross flow filtration for radwaste applications reverse osmosis demonstration case studies

    SciTech Connect

    Malkmus, D.

    1995-05-01

    Today`s radwaste economic and regulatory scenarios signify the importance in the improvement of operational practices to reduce generator liabilities. This action is largely due to the rising cost dealing with burial sites and the imposed waste volume restriction. To control the economical burdens associated with waste burial and to comply with stricter environmental regulations, NPP`s are attempting to modify their radwaste system(s) design and operating philosophy by placing a major emphasis on waste volume reduction and processing techniques. The utilization of reverse osmosis technology as a means for treatment of process and wastewater streams in the nuclear power industry has been investigated for many years. This paper will outline reverse osmosis theory and highlight performance data for process and waste stream purification applications. Case studies performed at 5 nuclear plants have been outlined. The demonstrations were performed on a widely variety of process stream for both a PWR and BWR application. The data provided by the pilot systems, the equipment design, and the economical impact a reverse osmosis unit will have on producing treated (high purity) are as follows.

  14. Demonstrating successful aging using the International Collaborative Study for Oral Health Outcomes.

    PubMed

    Atchison, K A; Andersen, R M

    2000-01-01

    As the lifespan increases and people are faced with 15 to 20 years of "old age," we ask what one considers successful aging with respect to oral health. We propose a comprehensive combination of outcome variables, maintenance of teeth, manageable periodontal condition, positive perceived oral health, satisfaction with their access to and receipt of dental services, and minimal functional problems, that together comprise a definition of successful aging. The International Collaborative Study for Oral Health Outcomes provides a data set for exploring the oral health of a diverse sample of older adults in US and international sites using the modified Andersen Behavioral Model. The percent of adults who report no natural teeth ranged from 16 percent in San Antonio to 59 percent in New Zealand. Seventy percent or more of the adults from each site rated their oral health as good/fair or better except in Poland. The current cohort of older adults is faring better on some indicators than others; nevertheless, ethnic minorities and poorer countries still demonstrate inequities. Dentistry must attempt to educate individuals early in their lifespan that a combination of personal oral health practices and current dental techniques offers the potential for successful oral health throughout one's lifetime.

  15. Pipe loop demonstration study of corrosion control alternatives at a pH of 10

    SciTech Connect

    Yannoni, C.C.; Clark, S.D.; Rafanovic, R.O.; Covellone, M.A.; Crosby, F.J.; Neff, C.H.

    1995-12-01

    The Federal Safe Drinking Water Act (SDWA) under the Lead and Copper Rule (LCR) requires many water supply utilities to reevaluate their current method of corrosion control and has resulted in the implementation of numerous capital improvements and/or changes in water treatment plant operations. The Providence Water Supply Board (PWSB) serves more than 600,000 people and maintains a pH of 10 through the treatment plant and water distribution system. Maintaining a pH of 10 results in a calcium carbonate precipitation potential (CCPP) of 5 to 12 mg/l expressed as calcium carbonate. Theoretically, a positive CCPP will result in the precipitation of calcium carbonate which maintains a thin protective film along the interior walls of water distribution pipe and helps minimize lead and copper solubility. Monitoring results indicated that lead levels were close to maximum allowable limits. The application of a pipe loop demonstration study provided information on alternative treatment methodologies to minimize lead solubility while maintaining a pH close to 10.0. Sodium silicate inhibition and dissolved inorganic carbonate (DIC) adjustment were two treatment methodologies which resulted in reducing lead levels by 50 percent.

  16. Quantitative and empirical demonstration of the Matthew effect in a study of career longevity

    PubMed Central

    Petersen, Alexander M.; Jung, Woo-Sung; Yang, Jae-Suk; Stanley, H. Eugene

    2011-01-01

    The Matthew effect refers to the adage written some two-thousand years ago in the Gospel of St. Matthew: “For to all those who have, more will be given.” Even two millennia later, this idiom is used by sociologists to qualitatively describe the dynamics of individual progress and the interplay between status and reward. Quantitative studies of professional careers are traditionally limited by the difficulty in measuring progress and the lack of data on individual careers. However, in some professions, there are well-defined metrics that quantify career longevity, success, and prowess, which together contribute to the overall success rating for an individual employee. Here we demonstrate testable evidence of the age-old Matthew “rich get richer” effect, wherein the longevity and past success of an individual lead to a cumulative advantage in further developing his or her career. We develop an exactly solvable stochastic career progress model that quantitatively incorporates the Matthew effect and validate our model predictions for several competitive professions. We test our model on the careers of 400,000 scientists using data from six high-impact journals and further confirm our findings by testing the model on the careers of more than 20,000 athletes in four sports leagues. Our model highlights the importance of early career development, showing that many careers are stunted by the relative disadvantage associated with inexperience. PMID:21173276

  17. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Describes three flame test demonstrations including "Student-Presented Demonstrations on the Colors of Transition Metal Complexes,""A Flame Test Demonstration Device," and "Vivid Flame Tests." Preparation and procedures are discussed. Included in the first demonstration is an evaluation scheme for grading student demonstrations. (CW)

  18. Resource Conservation and Recovery Act permit modifications and the functional equivalency demonstration: a case study

    SciTech Connect

    Elsberry, K.; Garcia, P.; Carnes, R.; Kinker, J.; Loehr, C; Lyon, W.

    1996-02-01

    Hazardous waste operating permits issued under the Resource Conservation and Recovery Act (RCRA) often impose requirements that specific components and equipment be used. Consequently, changing these items, may first require that the owner/operator request a potentially time-consuming and costly permit modification. However, the owner/operator may demonstrate that a modification is not required because the planned changes are ``functionally equivalent.`` The Controlled-Air Incinerator at Los Alamos National Laboratory is scheduled for maintenance and improvements. The incinerator`s carbon adsorption unit/high efficiency particulate air filtration system, was redesigned to improve reliability and minimize maintenance. A study was performed to determine whether the redesigned unit would qualify as functionally equivalent to the original component. In performing this study, the following steps were taken: (a) the key performance factors were identified; (b) performance data describing the existing unit were obtained; (c) performance of both the existing and redesigned units was simulated; and (d) the performance data were compared to ascertain whether the components could qualify as functionally equivalent. In this case, the key performance data included gas residence time and distribution of flow over the activated carbon. Because both units were custom designed and fabricated, a simple comparison of manufacturers` specifications was impossible. Therefore, numerical simulation of each unit design was performed using the TEMPEST thermal-hydraulic computer code to model isothermal hydrodynamic performance under steady-state conditions. The results of residence time calculations from the model were coupled with flow proportion and sampled using a Monte Carlo-style simulation to derive distributions that describe the predicted residence times.

  19. Design of the Massachusetts Childhood Obesity Research Demonstration (MA-CORD) Study

    PubMed Central

    Blaine, Rachel E.; Davison, Kirsten K.; Gortmaker, Steven; Anand, Shikha; Falbe, Jennifer; Kwass, Jo-Ann; Perkins, Meghan; Giles, Catherine; Criss, Shaniece; Colchamiro, Rachel; Woo Baidal, Jennifer; Land, Thomas; Smith, Lauren

    2015-01-01

    Abstract Background: Childhood obesity is highly prevalent, is associated with both short- and long-term adverse outcomes, disproportionately affects racial/ethnic minority and economically deprived children, and represents a major threat to public health. Among the most promising approaches for its prevention and management are multilevel, multisector strategies. Methods/Design: The Massachusetts Childhood Obesity Research Demonstration (MA-CORD) Study was a comprehensive, systematic intervention to prevent and reduce childhood obesity among low-income children ages 2–12 years in two selected cities in Massachusetts. Building on the Obesity Chronic Care Model, MA-CORD expanded a state public health department community-level obesity prevention initiative that incorporated evidence-based interventions in primary healthcare, the Women, Infants, and Children program, early care and education, schools/afterschool programs, as well as community-wide programs to improve food, beverage, physical activity (PA), and messaging environments. The study used a combination of pre– and post–time series and quasi-experimental designs to examine the extent to which the intervention resulted in changes in BMI, individual-level lifestyle behaviors, satisfaction with healthcare services, and quality of life among children, as well as changes in health policies, programs, and environments in the two intervention cities, compared to a comparison city. The intervention period was 2 years. Conclusions: MA-CORD will determine the extent to which a multisetting, multilevel intervention that integrates activities in primary care with broader public health interventions in schools, early care and education, and the community at large can improve children's dietary and PA behaviors and ultimately reduce obesity in low-income children. PMID:25469676

  20. Comparative study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells

    NASA Astrophysics Data System (ADS)

    Petibon, R.; Sinha, N. N.; Burns, J. C.; Aiken, C. P.; Ye, Hui; VanElzen, Collette M.; Jain, Gaurav; Trussler, S.; Dahn, J. R.

    2014-04-01

    The effect of various electrolyte additives and additive combinations added to a 1 M LiPF6 EC:EMC electrolyte on the positive and negative electrodes surface of 1 year old wound LiCoO2/graphite cells and Li[Ni0.4Mn0.4Co0.2])O2/graphite cells was studied using electrochemical impedance spectroscopy (EIS) on symmetric cells. The additives tested were: vinylene carbonate (VC), trimethoxyboroxine (TMOBX), fluoroethylene carbonate (FEC), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and H2O alone or in combination. In general, compared to control electrolyte, the additives tested reduced the impedance of the positive electrode and increased the impedance of the negative electrode with the exception of LiTFSI in Li[Ni0.4Mn0.4Co0.2]O2/graphite wound cells. Higher charge voltage led to higher positive electrode impedance, with the exception of 2%VC + 2% FEC, and 2% LiTFSI. In some cases, some additives when mixed with another controlled the formation of the SEI at one electrode, and shared the formation of the SEI at one electrode when mixed with a different additive.

  1. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1982-01-01

    Three chemistry demonstrations are described: (1) partition coefficients; (2) Rutherford simulation experiment; and (3) demonstration of the powerful oxidizing property of dimanganeseheptoxide. Background information, materials needed, and procedures are provided for each demonstration. (JN)

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Presented are three demonstrations for chemical education. The activities include: (1) demonstration of vapor pressure; (2) a multicolored luminol-based chemiluminescence demonstration; and (3) a Charles's Law/Vapor pressure apparatus. (RH)

  3. Reflectance Demonstration.

    ERIC Educational Resources Information Center

    Kowalski, Frank

    1993-01-01

    Presents a demonstration in which a mirror "disappears" upon rotation. The author has used the demonstration with students from fourth grade up through college. Suggestions are given for making the demonstration into a permanent hallway display. (MVL)

  4. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1981-01-01

    Provides procedures for demonstrations: (1) the ferrioxalate actinometer, which demonstrates a photochemical reaction; and (2) the silver mirror, which demonstrates the reduction of a metal salt to the metal and/or the reducing power of sugars. (CS)

  5. Generating Scenarios of Addition and Subtraction: A Study of Japanese University Students

    ERIC Educational Resources Information Center

    Kinda, Shigehiro

    2013-01-01

    Students are presented with problems involving three scenario types of addition and subtraction in elementary mathematics: one dynamic ("Change") and two static ("Combine, Compare"). Previous studies have indicated that the dynamic type is easier for school children, whereas the static types are more difficult and comprehended only gradually…

  6. Experimental study of combustion of decane, dodecane and hexadecane with polymeric and nano-particle additives

    NASA Astrophysics Data System (ADS)

    Ghamari, Mohsen; Ratner, Albert

    2015-11-01

    Recent studies have shown that adding combustible nano-particles could have promising effects on increasing burning rate of liquid fuels. Combustible nano-particles could enhance the heat conduction and mixing within the droplet. Polymers have also higher burning rate than regular hydrocarbon fuels because of having the flame closer to the droplet surface. Therefore adding polymeric additive could have the potential to increase the burning rate. In this study, combustion of stationary fuel droplets of n-Decane, n-Dodecane and n-Hexadecane doped with different percentages of a long chain polymer and also a very fine nano carbon was examined and compared with the pure hydrocarbon behavior. In contrast with hydrocarbon droplets with no polymer addition, several zones of combustion including a slow and steady burning zone, a strong swelling zone and a final fast and fairly steady combustion zone were also detected. In addition, increasing polymer percentage resulted in a more extended swelling zone and shorter slow burning zone in addition to a shorter total burning time. Addition of nano-particles also resulted in an overall increased burning rate and shortened burning time which is due to enhanced heat conduction within the droplet.

  7. Mental addition in bilinguals: an FMRI study of task-related and performance-related activation.

    PubMed

    Lin, Jo-Fu Lotus; Imada, Toshiaki; Kuhl, Patricia K

    2012-08-01

    Behavioral studies show that bilinguals are slower and less accurate when performing mental calculation in their nondominant (second; L2) language than in their dominant (first; L1) language. However, little is known about the neural correlates associated with the performance differences observed between bilinguals' 2 languages during arithmetic processing. To address the cortical activation differences between languages, the current study examined task-related and performance-related brain activation during mental addition when problems were presented auditorily in participants' L1 and L2. Eleven Chinese-English bilinguals heard 2-digit addition problems that required exact or approximate calculations. Functional magnetic resonance imaging results showed that auditorily presented multidigit addition in bilinguals activates bilateral inferior parietal and inferior frontal regions in both L1 and L2. Language differences were observed in the form of greater activation for L2 exact addition in the left inferior frontal area. A negative correlation between brain activation and behavioral performance during mental addition in L2 was observed in the left inferior parietal area. Current results provide further evidence for the effects of language-specific experience on arithmetic processing in bilinguals at the cortical level.

  8. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    This article details two demonstrations involving color changes. Included are "Manganese Color Reactions" and "Flame Colors Demonstration." Include a list of materials needed, procedures, cautions, and results. (CW)

  9. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1985-01-01

    Background information (including chemical reactions) and procedures used are provided for (1) three buffer demonstrations and (2) a demonstration of phase transfer catalysis and carbanion formation. (JN)

  10. NAS battery demonstration at American Electric Power:a study for the DOE energy storage program.

    SciTech Connect

    Newmiller, Jeff; Norris, Benjamin L. (Norris Energy Consulting Company, Martinez, CA); Peek, Georgianne Huff

    2006-03-01

    The first U.S. demonstration of the NGK sodium/sulfur battery technology was launched in August 2002 when a prototype system was installed at a commercial office building in Gahanna, Ohio. American Electric Power served as the host utility that provided the office space and technical support throughout the project. The system was used to both reduce demand peaks (peak-shaving operation) and to mitigate grid power disturbances (power quality operation) at the demonstration site. This report documents the results of the demonstration, provides an economic analysis of a commercial sodium/sulfur battery energy storage system at a typical site, and describes a side-by-side demonstration of the capabilities of the sodium/sulfur battery system, a lead-acid battery system, and a flywheel-based energy storage system in a power quality application.

  11. Sequential neural processes in abacus mental addition: an EEG and FMRI case study.

    PubMed

    Ku, Yixuan; Hong, Bo; Zhou, Wenjing; Bodner, Mark; Zhou, Yong-Di

    2012-01-01

    Abacus experts are able to mentally calculate multi-digit numbers rapidly. Some behavioral and neuroimaging studies have suggested a visuospatial and visuomotor strategy during abacus mental calculation. However, no study up to now has attempted to dissociate temporally the visuospatial neural process from the visuomotor neural process during abacus mental calculation. In the present study, an abacus expert performed the mental addition tasks (8-digit and 4-digit addends presented in visual or auditory modes) swiftly and accurately. The 100% correct rates in this expert's task performance were significantly higher than those of ordinary subjects performing 1-digit and 2-digit addition tasks. ERPs, EEG source localizations, and fMRI results taken together suggested visuospatial and visuomotor processes were sequentially arranged during the abacus mental addition with visual addends and could be dissociated from each other temporally. The visuospatial transformation of the numbers, in which the superior parietal lobule was most likely involved, might occur first (around 380 ms) after the onset of the stimuli. The visuomotor processing, in which the superior/middle frontal gyri were most likely involved, might occur later (around 440 ms). Meanwhile, fMRI results suggested that neural networks involved in the abacus mental addition with auditory stimuli were similar to those in the visual abacus mental addition. The most prominently activated brain areas in both conditions included the bilateral superior parietal lobules (BA 7) and bilateral middle frontal gyri (BA 6). These results suggest a supra-modal brain network in abacus mental addition, which may develop from normal mental calculation networks.

  12. The addition of GTN to capsaicin cream reduces the discomfort associated with application of capsaicin alone. A volunteer study.

    PubMed

    McCleane, G J; McLaughlin, M

    1998-11-01

    In a double blind, placebo controlled trial of 40 volunteers, the burning discomfort associated with application of capsaicin cream (0.025%) was compared to placebo, GTN cream (1.33%) and to the combination of capsaicin cream (0.025%) plus GTN cream 1.33%. Median VAS for burning pain were 0 for the placebo, GTN and GTN + capsaicin groups and 3 for the capsaicin group after single application of each cream at daily intervals. This study demonstrates that after single application the addition of GTN to capsaicin significantly reduces the burning discomfort associated with application of capsaicin alone.

  13. Assessing the condition of bayous and estuaries: Bayou Chico Gulf of Mexico demonstration study

    SciTech Connect

    Dickson, K.; Acevedo, M.; Waller, T.; Kennedy, J.; Simons, J.; Mayer, F.; Lewis, M.; Walker, W.; Ammann, L.

    1995-12-31

    A demonstration study was conducted in May 1994 on Bayou Chico to assess the utility of various assessment and measurement endpoints in determining the condition of bayous and estuaries. Bayou Chico has water quality problems attributed to its low flushing rate and urban/industrial land use in its watershed. The sampling scheme assessed the within-sampling station and spatial variability of measurement endpoints. Fourteen sampling stations in Bayou Chico and 3 stations in Pensacola Bay were selected based on an intensified EMAP sampling grid. Time and space coordinated sampling was conducted for: sediment contaminants and properties, sediment toxicity, water quality, benthic infauna, zooplankton and phytoplankton populations. Fish and crabs were also collected and analyzed for a suite of biomarkers and organic chemical residues. Primary productivity was measured via the light bottle dark bottle oxygen method and via diurnal oxygen measurements made with continuous recording data sondes. Stream sites were evaluated for water and sediment quality, water and sediment toxicity, benthic invertebrates and fish. Watershed analyses included assessment of land use/landcover (via SPOT and TM images), soils, pollution sources (point and non-point) and hydrography. These data were coordinated via an Arc/Info GIS system for display and spatial analysis. 1994 survey data were used to parameterize environmental fate models such as SWMM (Storm Water Management Model), DYNHYD5 (WASP5 hydrodynamics model) and WASP5 (Water Quality Analysis Simulation Program) to make predictions about the dynamics and fate of chemical contaminants in Bayou Chico. This paper will present an overview, and report on the results in regards to within-site and spatial variability in Bayou Chico. Conclusions on the efficacy of the assessment and measurement endpoints in evaluating the condition (health) of Bayou Chico will be presented.

  14. Microstructural Study Of Zinc Hot Dip Galvanized Coatings with Titanium Additions In The Zinc Melt

    NASA Astrophysics Data System (ADS)

    Konidaris, S.; Pistofidis, N.; Vourlias, G.; Pavlidou, E.; Stergiou, A.; Stergioudis, G.; Polychroniadis, E. K.

    2007-04-01

    Zinc hot-dip galvanizing is a method for protecting iron and steel against corrosion. Galvanizing with pure Zn or Zn with additions like Ni, Al, Pb and Bi has been extensively studied, but there is a lack of scientific information about other additions. The present work examines the effect of a 0.5 wt% Ti addition in the Zn melt. The samples were exposed to accelerated corrosion in a salt spray chamber (SSC). The microstructure and chemical composition of the coatings were determined by Optical Microscopy, XRD and SEM associated with an EDS Analyzer. The results indicate that the coatings have a typical morphology, while Zn-Ti phases were also detected.

  15. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy.

    PubMed

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-01-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

  16. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    SciTech Connect

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.

  17. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    PubMed Central

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-01-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

  18. Tested Demonstrations

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1977-01-01

    Three demonstrations are described: paramagnetic properties of Fe(11) and Fe(111), the preparation of polyurethane foam: a lecture demonstration and the electrolysis of water-fuel cell reactions. A small discussion of the concepts demonstrated is included in each demonstration's description. (MR)

  19. Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

    SciTech Connect

    Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

    2010-12-29

    This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release with unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway

  20. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality. PMID:26515667

  1. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality.

  2. Development of Criteria to Measure the Extent of Implementation and the Effectiveness of Demonstration in Vocational Education. Case Studies.

    ERIC Educational Resources Information Center

    Development Associates, Inc., Arlington, VA.

    This document presents case studies of eight demonstration projects selected to assess the practicality and feasibility of a monograph for improving and measuring the impact of vocational education demonstration projects. An introduction provides background of the project that developed that monograph and information on the case studies, including…

  3. Unravelling the impact of hydrocarbon structure on the fumarate addition mechanism--a gas-phase ab initio study.

    PubMed

    Bharadwaj, Vivek S; Vyas, Shubham; Villano, Stephanie M; Maupin, C Mark; Dean, Anthony M

    2015-02-14

    The fumarate addition reaction mechanism is central to the anaerobic biodegradation pathway of various hydrocarbons, both aromatic (e.g., toluene, ethyl benzene) and aliphatic (e.g., n-hexane, dodecane). Succinate synthase enzymes, which belong to the glycyl radical enzyme family, are the main facilitators of these biochemical reactions. The overall catalytic mechanism that converts hydrocarbons to a succinate molecule involves three steps: (1) initial H-abstraction from the hydrocarbon by the radical enzyme, (2) addition of the resulting hydrocarbon radical to fumarate, and (3) hydrogen abstraction by the addition product to regenerate the radical enzyme. Since the biodegradation of hydrocarbon fuels via the fumarate addition mechanism is linked to bio-corrosion, an improved understanding of this reaction is imperative to our efforts of predicting the susceptibility of proposed alternative fuels to biodegradation. An improved understanding of the fuel biodegradation process also has the potential to benefit bioremediation. In this study, we consider model aromatic (toluene) and aliphatic (butane) compounds to evaluate the impact of hydrocarbon structure on the energetics and kinetics of the fumarate addition mechanism by means of high level ab initio gas-phase calculations. We predict that the rate of toluene degradation is ∼100 times faster than butane at 298 K, and that the first abstraction step is kinetically significant for both hydrocarbons, which is consistent with deuterium isotope effect studies on toluene degradation. The detailed computations also show that the predicted stereo-chemical preference of the succinate products for both toluene and butane are due to the differences in the radical addition rate constants for the various isomers. The computational and kinetic modeling work presented here demonstrates the importance of considering pre-reaction and product complexes in order to accurately treat gas phase systems that involve intra and inter

  4. Hazard and risk assessment of a nanoparticulate cerium oxide-based diesel fuel additive - a case study.

    PubMed

    Park, Barry; Donaldson, Kenneth; Duffin, Rodger; Tran, Lang; Kelly, Frank; Mudway, Ian; Morin, Jean-Paul; Guest, Robert; Jenkinson, Peter; Samaras, Zissis; Giannouli, Myrsini; Kouridis, Haris; Martin, Patricia

    2008-04-01

    Envirox is a scientifically and commercially proven diesel fuel combustion catalyst based on nanoparticulate cerium oxide and has been demonstrated to reduce fuel consumption, greenhouse gas emissions (CO(2)), and particulate emissions when added to diesel at levels of 5 mg/L. Studies have confirmed the adverse effects of particulates on respiratory and cardiac health, and while the use of Envirox contributes to a reduction in the particulate content in the air, it is necessary to demonstrate that the addition of Envirox does not alter the intrinsic toxicity of particles emitted in the exhaust. The purpose of this study was to evaluate the safety in use of Envirox by addressing the classical risk paradigm. Hazard assessment has been addressed by examining a range of in vitro cell and cell-free endpoints to assess the toxicity of cerium oxide nanoparticles as well as particulates emitted from engines using Envirox. Exposure assessment has taken data from modeling studies and from airborne monitoring sites in London and Newcastle adjacent to routes where vehicles using Envirox passed. Data have demonstrated that for the exposure levels measured, the estimated internal dose for a referential human in a chronic exposure situation is much lower than the no-observed-effect level (NOEL) in the in vitro toxicity studies. Exposure to nano-size cerium oxide as a result of the addition of Envirox to diesel fuel at the current levels of exposure in ambient air is therefore unlikely to lead to pulmonary oxidative stress and inflammation, which are the precursors for respiratory and cardiac health problems. PMID:18444008

  5. Systems definition study for shuttle demonstration flights of large space structures. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The development of large space structure technology is discussed, with emphasis on space fabricated structures which are automatically manufactured in space from sheet-strip materials and assembled on-orbit. Definition of a flight demonstration involving an Automated Beam Builder and the building and assembling of large structures is presented.

  6. A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part II.

    ERIC Educational Resources Information Center

    Behr, Shirley K.; And Others

    A project to provide technical assistance to staffs of two demonstration programs for preschool handicapped children and their families is described. The focus was technical assistance developed and exercised by the Technical Assistance Development System (TADS), which assisted in the development of the Handicapped Children's Early Education…

  7. A Study of Aluminum Combustion in Solids, Powders, Foams, Additively-Manufactured Lattices, and Composites

    NASA Astrophysics Data System (ADS)

    Black, James; Trammell, Norman; Batteh, Jad; Curran, Nicholas; Rogers, John; Littrell, Donald

    2015-06-01

    This study examines the fireball characteristics, blast parameters, and combustion efficiency of explosively-shocked aluminum-based materials. The materials included structural and non-structural aluminum forms - such as solid cylinders, foams, additively-manufactured lattices, and powders - and some polytetrafluoroethylene-aluminum (PTFE-Al) composites. The materials were explosively dispersed in a small blast chamber, and the blast properties and products were measured with pressure transducers, thermocouples, slow and fast ultraviolet/visible spectrometers, and high-speed video.

  8. Spectra-temporal patterns underlying mental addition: an ERP and ERD/ERS study.

    PubMed

    Ku, Yixuan; Hong, Bo; Gao, Xiaorong; Gao, Shangkai

    2010-03-12

    Functional neuroimaging data have shown that mental calculation involves fronto-parietal areas that are composed of different subsystems shared with other cognitive functions such as working memory and language. Event-related potential (ERP) analysis has also indicated sequential information changes during the calculation process. However, little is known about the dynamic properties of oscillatory networks in this process. In the present study, we applied both ERP and event-related (de-)synchronization (ERS/ERD) analyses to EEG data recorded from normal human subjects performing tasks for sequential visual/auditory mental addition. Results in the study indicate that the late positive components (LPCs) can be decomposed into two separate parts. The earlier element LPC1 (around 360ms) reflects the computing attribute and is more prominent in calculation tasks. The later element LPC2 (around 590ms) indicates an effect of number size and appears larger only in a more complex 2-digit addition task. The theta ERS and alpha ERD show modality-independent frontal and parietal differential patterns between the mental addition and control groups, and discrepancies are noted in the beta ERD between the 2-digit and 1-digit mental addition groups. The 2-digit addition (both visual and auditory) results in similar beta ERD patterns to the auditory control, which may indicate a reliance on auditory-related resources in mental arithmetic, especially with increasing task difficulty. These results coincide with the theory of simple calculation relying on the visuospatial process and complex calculation depending on the phonological process. PMID:20105450

  9. Case Study of The ARRA-Funded GSHP Demonstration at the Natural Sources Building, Montana Tech

    SciTech Connect

    Malhotra, Mini; Liu, Xiaobing

    2015-04-01

    Under the American Recovery and Reinvestment Act (ARRA), 26 ground source heat pump (GSHP) projects were competitively selected in 2009 to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. One of the selected demonstration projects was proposed by Montana Tech of the University of Montana for a 56,000 sq ft, newly constructed, on-campus research facility – the Natural Resources Building (NRB) located in Butte, Montana. This demonstrated GSHP system consists of a 50 ton water-to-water heat pump and a closed-loop ground heat exchanger with two redundant 7.5 hp constant-speed pumps to use water in the nearby flooded mines as a heat source or heat sink. It works in conjunction with the originally installed steam HX and an aircooled chiller to provide space heating and cooling. It is coupled with the existing hot water and chilled water piping in the building and operates in the heating or cooling mode based on the outdoor air temperature. The ground loop pumps operate in conjunction with the existing pumps in the building hot and chilled water loops for the operation of the heat pump unit. The goal of this demonstration project is to validate the technical and economic feasibility of the demonstrated commercial-scale GSHP system in the region, and illustrate the feasibility of using mine waters as the heat sink and source for GSHP systems. Should the demonstration prove satisfactory and feasible, it will encourage similar GSHP applications using mine water, thus help save energy and reduce carbon emissions. The actual performance of the system is analyzed with available measured data for January through July 2014. The annual energy performance is predicted and compared with a baseline scenario, with the heating and cooling provided by the originally designed systems. The comparison is made in terms of energy savings, operating cost savings, cost-effectiveness, and environmental benefits. Finally

  10. Carbohydrate Dehydration Demonstrations

    NASA Astrophysics Data System (ADS)

    Dolson, David A.; Battino, Rubin; Letcher, Trevor M.; Pegel, K. H.; Revaprasadu, N.

    1995-10-01

    The "charring reaction" of a carbohydrate with concentrated H2SO4 is a demonstration of the dehydrating power of H2SO4. In this paper several sugars and supermarket carbohydrates are systematically studied with respect to size of particles, addition of water, and amount of H2SO4 added. The results are tabulated as to the amount of time to blackening and to the attainment of a particular volume of the charred material. Detailed safety precautions are included.

  11. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Describes two demonstrations for college level chemistry courses including: "Electrochemical Cells Using Sodium Silicate" and "A Simple, Vivid Demonstration of Selective Precipitation." Lists materials, preparation, procedures, and precautions. (CW)

  12. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1981-01-01

    Two demonstrations are described: (1) red cabbage and electrolysis of water to bring together acid/base and electrochemical concepts; and (2) a model to demonstrate acid/base conjugate pairs utilizing magnets. (SK)

  13. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1981-01-01

    Presents: (1) a simple demonstration which illustrates the driving force of entropy using the familiar effects of the negative thermal expansion coefficient of rubber; and (2) a demonstration of tetrahedral bonding using soap films. (CS)

  14. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1989-01-01

    Presented are two demonstrations including a variation of the iodine clock reaction, and a simple demonstration of refractive index. The materials, procedures, and a discussion of probable results are given for each. (CW)

  15. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1990-01-01

    Presented are two demonstrations; "Heat of Solution and Colligative Properties: An Illustration of Enthalpy and Entropy," and "A Vapor Pressure Demonstration." Included are lists of materials and experimental procedures. Apparatus needed are illustrated. (CW)

  16. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1978-01-01

    Presents two demonstrations; one on Boyle's Law, to illustrate the gas law and serve as a challenging problem for the students; the other is a modified Color Blind Traffic Light demonstration in which the oscillating reactions were speeded up. (GA)

  17. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Provides instructions on conducting four demonstrations for the chemistry classroom. Outlines procedures for demonstrations dealing with coupled oscillations, the evaporation of liquids, thioxanthone sulfone radical anion, and the control of variables and conservation of matter. (TW)

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1978-01-01

    Two demonstrations are described which are suitable for introductory chemistry classes. The first involves the precipitation of silver, and the second is a demonstration of the relationship between rate constants and equilibrium constants using water and beakers. (BB)

  19. Demonstrating Diffusion

    ERIC Educational Resources Information Center

    Foy, Barry G.

    1977-01-01

    Two demonstrations are described. Materials and instructions for demonstrating movement of molecules into cytoplasm using agar blocks, phenolphthalein, and sodium hydroxide are given. A simple method for demonstrating that the rate of diffusion of a gas is inversely proportional to its molecular weight is also presented. (AJ)

  20. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Describes a demonstration involving the controlled combustion of a mixture of metals with black and smokeless powder in a small Erlenmeyer flask. Also describes demonstrations using a device that precludes breathing of hazardous vapors during class demonstrations; the device is easy to transport and use in rooms without sinks. (JN)

  1. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Describes two demonstrations used in laboratory chemistry courses. Discusses a "pH-activated" display used to chemically and visually supplement lecture demonstrations. Outlines another demonstration designed to show that copper(II) chloride is made of two ions, blue and yellow, which are combined to produce green. (TW)

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Sands, Robert; And Others

    1982-01-01

    Procedures for two demonstrations are provided. The solubility of ammonia gas in water is demonstrated by introducing water into a closed can filled with the gas, collapsing the can. The second demonstration relates scale of standard reduction potentials to observed behavior of metals in reactions with hydrogen to produce hydrogen gas. (Author/JN)

  3. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Describes two classroom chemistry demonstrations which focus on the descriptive chemistry of bromine and iodine. Outlines the chemicals and equipment needed, experimental procedures, and discussion of one demonstration of the oxidation states of bromine and iodine, and another demonstration of the oxidation states of iodine. (TW)

  4. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1985-01-01

    List of materials needed, procedures used, and results obtained are provided for two demonstrations. The first is an inexpensive and quick method for demonstrating column chromatography of plant pigments of spinach extract. The second is a demonstration of cathodic protection by impressed current. (JN)

  5. Cells from Degenerative Intervertebral Discs Demonstrate Unfavorable Responses to Mechanical and Inflammatory Stimuli: A Pilot Study

    PubMed Central

    Sowa, Gwendolyn A.; Coelho, J. Paulo; Vo, Nam V.; Pacek, Corey; Westrick, Edward; Kang, James D.

    2016-01-01

    Objective Mechanical forces and inflammatory signaling influence intervertebral disc matrix homeostasis. We hypothesized that annulus fibrosus cells from degenerative discs would have altered responses to mechanical and inflammatory stimuli compared with cells isolated from normal discs. Design Annulus fibrosus cells were isolated from New Zealand White rabbits with normal and magnetic resonance imaging-confirmed degenerative discs created by annular stab. Cells were cultured with and without inflammatory and mechanical stimuli (tensile strain). After 4 or 24 hrs, the mRNA expression of inflammatory, catabolic, and anabolic genes was measured by reverse transcription polymerase chain reaction. Results Baseline gene expression differences were noted between cells from normal and degenerative discs. Degenerative cells demonstrated a more proinflammatory response profile to inflammatory and mechanical stimuli and loss of the beneficial effects of mechanical signaling. Decreased expression of catabolic and anabolic genes was observed in degenerative cells under conditions of inflammatory and mechanical stimuli. Conclusions These data demonstrate that degenerative cells have a decreased capacity to respond positively to beneficial levels of mechanical strain and demonstrate an exaggerated response to an inflammatory stimulus. This may, in part, help to explain differential responses to motion-based therapies in patients with intervertebral disc degeneration. PMID:22760106

  6. Theoretical study of the oxidation mechanisms of naphthalene initiated by hydroxyl radicals: the OH-addition pathway.

    PubMed

    Shiroudi, Abolfazl; Deleuze, Michael S; Canneaux, Sébastien

    2014-07-01

    The oxidation mechanisms of naphthalene by OH radicals under inert (He) conditions have been studied using density functional theory along with various exchange-correlation functionals. Comparison has been made with benchmark CBS-QB3 theoretical results. Kinetic rate constants were correspondingly estimated by means of transition state theory and statistical Rice-Ramsperger-Kassel-Marcus (RRKM) theory. Comparison with experiment confirms that, on the OH-addition reaction pathway leading to 1-naphthol, the first bimolecular reaction step has an effective negative activation energy around -1.5 kcal mol(-1), whereas this step is characterized by an activation energy around 1 kcal mol(-1) on the OH-addition reaction pathway leading to 2-naphthol. Effective rate constants have been calculated according to a steady state analysis upon a two-step model reaction mechanism. In line with experiment, the correspondingly obtained branching ratios indicate that, at temperatures lower than 410 K, the most abundant product resulting from the oxidation of naphthalene by OH radicals must be 1-naphthol. The regioselectivity of the OH(•)-addition onto naphthalene decreases with increasing temperatures and decreasing pressures. Because of slightly positive or even negative activation energies, the RRKM calculations demonstrate that the transition state approximation breaks down at ambient pressure (1 bar) for the first bimolecular reaction steps. Overwhelmingly high pressures, larger than 10(5) bar, would be required for restoring to some extent (within ∼5% accuracy) the validity of this approximation for all the reaction channels that are involved in the OH-addition pathway. Analysis of the computed structures, bond orders, and free energy profiles demonstrate that all reaction steps involved in the oxidation of naphthalene by OH radicals satisfy Leffler-Hammond's principle. Nucleus independent chemical shift indices and natural bond orbital analysis also show that the computed

  7. Effect of Exogenous Phytase Addition on Soil Phosphatase Activities: a Fluorescence Spectroscopy Study.

    PubMed

    Yang, Xiao-zhu; Chen, Zhen-hua; Zhang, Yu-lan; Chen, Li-jun

    2015-05-01

    The utilization of organic phosphorus (P) has directly or indirectly improved after exogenous phytase was added to soil. However, the mechanism by which exogenous phytase affected the soil phosphatases (phosphomonoesterase and phosphodiesterase) activities was not clear. The present work was aimed to study red soil, brown soil and cinnamon soil phosphomonoesterase (acid and alkaline) (AcP and AlP) and phosphodiesterase (PD) activities responding to the addition of exogenous phytase (1 g phytase/50 g air dry soil sample) based on the measurements performed via a fluorescence detection method combined with 96 microplates using a TECAN Infinite 200 Multi-Mode Microplate Reader. The results indicated that the acid phosphomonoesterase activity was significantly enhanced in red soil (p≤0. 01), while it was significantly reduced in cinnamon soil; alkaline phosphomonoesterase activity was significantly enhanced in cinnamon soil (p≤ 0. 01), while it was significantly reduced in red soil; phosphodiesterase activity was increased in three soils but it was significantly increased in brown soil (p≤0. 01) after the addition of exogenous phytase. The activities still remained strong after eight days in different soils, which indicated that exogenous phytase addition could be enhance soil phosphatases activities effectively. This effect was not only related to soil properties, such as pH and phosphorus forms, but might also be related to the excreted enzyme amount of the stimulating microorganism. Using fluorescence spectroscopy to study exogenous phytase addition influence on soil phosphatase activities was the first time at home and abroad. Compared with the conventional spectrophotometric method, the fluorescence microplate method is an accurate, fast and simple to use method to determine the relationships among the soil phosphatases activities.

  8. Feasibility study of endoscopic x-ray luminescence computed tomography: Simulation demonstration and phantom application

    SciTech Connect

    Chen, Xueli; Liang, Jimin; Cao, Xin; Yang, Defu; Chen, Dongmei; Ripoll, Jorge; Tian, Jie

    2013-08-28

    Even though endoscopic fluorescence diffuse optical tomography (eFDOT) exhibits significant potential, currently its application is limited due to the existence of strong autofluorescence and the imaging inaccuracy caused by a very short source-detector distance. Motivated by the emerging X-ray luminescence computed tomography (XLCT) technology, we presented an endoscopic XLCT (eXLCT) methodology. In the methodology, the aperture angle of the objective was incorporated into the forward model, providing a more accurate description of light propagation. Numerical simulation with a heterogeneous geometry and an imaging experiment with a physical phantom were illustrated to demonstrate the feasibility of the presented eXLCT methodology.

  9. Idaho Nuclear Technology and Engineering Center Newly Generated Liquid Waste Demonstration Project Feasibility Study

    SciTech Connect

    Herbst, A.K.

    2000-02-01

    A research, development, and demonstration project for the grouting of newly generated liquid waste (NGLW) at the Idaho Nuclear Technology and Engineering Center is considered feasible. NGLW is expected from process equipment waste, decontamination waste, analytical laboratory waste, fuel storage basin waste water, and high-level liquid waste evaporator condensate. The potential grouted waste would be classed as mixed low-level waste, stabilized and immobilized to meet RCRA LDR disposal in a grouting process in the CPP-604 facility, and then transported to the state.

  10. Systems definition study for shuttle demonstration flights of large space structures, Volume 2: Technical Report

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The development of large space structure (LSS) technology is discussed, with emphasis on space fabricated structures which are automatically manufactured in space from sheet-strip materials and assembled on-orbit. It is concluded that an LSS flight demonstration using an Automated Beam Builder and the orbiter as a construction base, could be performed in the 1983-1984 time period. The estimated cost is $24 million exclusive of shuttle launch costs. During the mission, a simple space platform could be constructed in-orbit to accommodate user requirements associated with earth viewing and materials exposure experiments needs.

  11. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    DOE PAGES

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused bymore » a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.« less

  12. Multi-Lab EV Smart Grid Integration Requirements Study. Providing Guidance on Technology Development and Demonstration

    SciTech Connect

    Markel, T.; Meintz, A.; Hardy, K.; Chen, B.; Bohn, T.; Smart, J.; Scoffield, D.; Hovsapian, R.; Saxena, S.; MacDonald, J.; Kiliccote, S.; Kahl, K.; Pratt, R.

    2015-05-28

    The report begins with a discussion of the current state of the energy and transportation systems, followed by a summary of some VGI scenarios and opportunities. The current efforts to create foundational interface standards are detailed, and the requirements for enabling PEVs as a grid resource are presented. Existing technology demonstrations that include vehicle to grid functions are summarized. The report also includes a data-based discussion on the magnitude and variability of PEVs as a grid resource, followed by an overview of existing simulation tools that vi This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. can be used to explore the expansion of VGI to larger grid functions that might offer system and customer value. The document concludes with a summary of the requirements and potential action items that would support greater adoption of VGI.

  13. Demonstration of geophysical methods for burial ground geophysical characterization study at the DOE Savannah River site

    SciTech Connect

    Hasbrouck, J.C.; MacLean, H.D.; Geotech, R.

    1996-11-01

    Rust Geotech, operating contractor at the U.S. Department of Energy Grand Junction Projects Office (DOE-GJPO), conducted a demonstration of the trench boundary and large-object location capabilities of five nonintrusive geophysical methods in the Low-Level Radioactive Waste Disposal Facility (LLRWDF) at the DOE Savannah River Site (SRS). The plan for Resource Conservation and Recovery Act (RCRA) closure of the SRS LLRWDF specifies inplace compaction of {open_quotes}B-25{close_quotes} metal boxes containing low-level radioactive wastes. The boxes are buried in Engineered Low-Level Trenches (ELLTs) at the facility. To properly guide and control the compaction operation, the coordinates of the trench boundaries must be determined to an accuracy within 5 feet and the outer edges of the metal boxes in the trenches must be determined to within 2 feet.

  14. Prototype demonstration studies of production of methane from municipal solid waste at Pompano Beach, Florida

    SciTech Connect

    Faroog, S.; Daly, E.; Dasgupta, A.; Gerrish, M.P.; Sengupta, S.; Wong, K.F.

    1980-12-01

    A prototype demonstration plant for the production of methane from anaerobic digestion of municipal solid waste in amounts up to 100 tons per day is built at Pompano Beach, Florida. The plant is capable of producing 6000 ft/sup 3/ of gas per ton of municipal waste. Approximately half of the gas is methane, the other half CO/sub 2/ along with some trace gases. In this plant the raw municipal solid waste is shredded, ferrous metals removed magnetically and air classified to obtain an organic-rich light weight fraction, which is periodically mixed with sewage sludge and fed into the anaerobic digester. The processed effluent is filtered in a vacuum filter and the emerging filter cake is disposed on the nearby existing sanitary landfill. The filtrate is recirculated into the digester. Various gas, solid and liquid streams coming out of the digester are analyzed for physical, chemical and biological pollution parameters.

  15. Demonstration of the combination of slice imaging and Rydberg tagging for studies of photodissociation dynamics

    NASA Astrophysics Data System (ADS)

    Cruse, H. A.; Softley, T. P.

    2004-09-01

    The slice-imaging variant of photofragment ion imaging is combined with Rydberg tagging. The photodissociation of NO2 at 355 nm is used as the test system and the NO fragments are Rydberg tagged by two-photon two-color excitation via the intermediate A2Σ+ state. Images obtained by this method are compared with ion images obtained in the same apparatus using the approach of Kitsopoulos and co-workers [Rev. Sci. Instrum. 72, 3848 (2001)]. Comparable resolution and angular distributions are obtained in the two cases. It is proposed that the method demonstrated here could provide a complementary approach to existing ion-imaging methods, especially where resonantly enhanced multiphoton ionization detection of fragments is problematic.

  16. Addition of fluoride to pit and fissure sealants--a feasibility study.

    PubMed

    Swartz, M L; Phillips, R W; Norman, R D; Elliason, S; Rhodes, B F; Clark, H E

    1976-01-01

    The data obtained in this in vitro study indicate that contact with pit and fissure sealants to which NaF has been added in amounts ranging from 2 to 5% substantially increases the fluoride content of the enamel and reduces its solubility in acid. The properties of the materials do not seem to be impaired by the addition of fluoride in these amounts. It thus appears that this approach to providing a backup anticariogenic mechanism may, indeed, be feasible. However, further investigation must be done to confirm the anticariogenic effect and to establish the most efficacious means of fluoride incorporation in the materials.

  17. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1983-01-01

    Free radical chlorination of methane is used in organic chemistry to introduce free radical/chain reactions. In spite of its common occurrence, demonstrations of the reaction are uncommon. Therefore, such a demonstration is provided, including background information, preparation of reactants/reaction vessel, introduction of reactants, irradiation,…

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Provides three descriptions of demonstrations used in various chemistry courses. Includes the use of a simple demonstration model to illustrate principles of chromatography, techniques for using balloons to teach about the behavior of gases, and the use of small concentrations of synthetic polyelectrolytes to induce the flocculation hydrophobic…

  19. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Outlines a simple, inexpensive way of demonstrating electroplating using the reaction between nickel ions and copper metal. Explains how to conduct a demonstration of the electrolysis of water by using a colored Na2SO4 solution as the electrolyte so that students can observe the pH changes. (TW)

  20. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1990-01-01

    Presented are three demonstrations: "The Construction and Use of Commercial Voltaic Cell Displays in Freshman Chemistry"; Dramatizing Isotopes: Deuterated Ice Cubes Sink"; and "A Simple Apparatus to Demonstrate Differing Gas Diffusion Rates (Graham's Law)." Materials, procedures, and safety considerations are discussed. (CW)

  1. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1980-01-01

    Described is a demonstration utilized to measure the heat of vaporization using the Clausius-Clapeyron equation. Explained is that when measurement is made as part of a demonstration, it raises student's consciousness that chemistry is experimentally based. (Author/DS)

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1982-01-01

    Three chemistry demonstrations are described: (1) modification of copper catalysis demonstration apparatus; (2) experiments in gas-liquid chromatography with simple gas chromatography at room temperature; and (3) equilibria in silver arsenate-arsenic acid and silver phosphate-phosphoric acid systems. Procedures and materials needed are provided.…

  3. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1989-01-01

    Presented are two chemistry demonstrations: (1) an alternative method for the demonstration of the properties of alkali metals, water is added to small amounts of metal; (2) an exploration of the properties of hydrogen, helium, propane, and carbon dioxide using an open trough and candle. (MVL)

  4. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1990-01-01

    Described are demonstrations designed to reveal the important "nonsolvent" properties of water through its interaction with a toy called "Magic Sand" and other synthetic silica derivatives, especially those bonded with organic moities. The procedures for seven demonstrations along with a discussion of the effects are presented. (CW)

  5. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1980-01-01

    Two demonstrations are described: (1) a variant of preparing purple benzene by phase transfer catalysis with quaternary ammonium salts and potassium permanganate in which crown ethers are used; (2) a corridor or "hallway" demonstration in which unknown molecular models are displayed and prizes awarded to students correctly identifying the…

  6. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1983-01-01

    Describes a lecture demonstration of a solid state phase transition using a thermodynamic material which changes state at room temperature. Also describes a demonstration on kinetics using a "Big Bang" (trade mark) calcium carbide cannon. Indicates that the cannon is safe to use. (JN)

  7. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1983-01-01

    Provides directions for setup and performance of two demonstrations. The first demonstrates the principles of Raoult's Law; using a simple apparatus designed to measure vapor pressure. The second illustrates the energy available from alcohol combustion (includes safety precautions) using an alcohol-fueled missile. (JM)

  8. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1979-01-01

    Presents two demonstrations for classroom use related to precipitation of ferrous hydroxide and to variation of vapor pressure with temperature. The former demonstration is simple and useful when discussing solubility of ionic compounds electrode potential of transition elements, and mixed valence compounds. (Author/SA)

  9. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1983-01-01

    Discusses a supplement to the "water to rose" demonstration in which a pink color is produced. Also discusses blood buffer demonstrations, including hydrolysis of sodium bicarbonate, simulated blood buffer, metabolic acidosis, natural compensation of metabolic acidosis, metabolic alkalosis, acidosis treatment, and alkalosis treatment. Procedures…

  10. Complete Demonstration.

    ERIC Educational Resources Information Center

    Yelon, Stephen; Maddocks, Peg

    1986-01-01

    Describes four-step approach to educational demonstration: tell learners they will have to perform; what they should notice; describe each step before doing it; and require memorization of steps. Examples illustrate use of this process to demonstrate a general mental strategy, and industrial design, supervisory, fine motor, and specific…

  11. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Describes two laboratory demonstrations in chemistry. One uses dry ice, freon, and freezer bags to demonstrate volume changes, vapor-liquid equilibrium, a simulation of a rain forest, and vaporization. The other uses the clock reaction technique to illustrate fast reactions and kinetic problems in releasing carbon dioxide during respiration. (TW)

  12. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1984-01-01

    Background information and procedures are provided for a second part to the dichromate volcano demonstration. The green ash produced during the demonstration is reduced to metal using aluminothermy (Goldschmide process). Also describes suitable light sources and spectroscopes for student observation of emission spectra in lecture halls. (JN)

  13. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Describes two demonstrations designed to help chemistry students visualize certain chemical properties. One experiment uses balloons to illustrate the behavior of gases under varying temperatures and pressures. The other uses a makeshift pea shooter and a commercial model to demonstrate atomic structure and the behavior of high-speed particles.…

  14. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1989-01-01

    Provided are two demonstrations for an introductory course in chemistry. The first one emphasizes the observation and the interpretation of facts to form hypotheses during the heating of a beaker of water. The second demonstration shows the liquid phase of carbon dioxide using dry ice and a pressure gauge. (YP)

  15. Improving Students' Study Habits by Demonstrating the Mnemonic Benefits of Semantic Processing

    ERIC Educational Resources Information Center

    Bugg, Julie M.; DeLosh, Edward L.; McDaniel, Mark A.

    2008-01-01

    This article describes an in-class exercise that illustrates the advantage of semantic over nonsemantic study habits. The exercise includes a survey of students' current study strategies, followed by the presentation of an abbreviated version of Craik and Tulving's(1975) classic levels-of-processing experiment. We observed significant benefits of…

  16. A water soluble additive to suppress respirable dust from concrete-cutting chainsaws: a case study.

    PubMed

    Summers, Michael P; Parmigiani, John P

    2015-01-01

    Respirable dust is of particular concern in the construction industry because it contains crystalline silica. Respirable forms of silica are a severe health threat because they heighten the risk of numerous respirable diseases. Concrete cutting, a common work practice in the construction industry, is a major contributor to dust generation. No studies have been found that focus on the dust suppression of concrete-cutting chainsaws, presumably because, during normal operation water is supplied continuously and copiously to the dust generation points. However, there is a desire to better understand dust creation at low water flow rates. In this case study, a water-soluble surfactant additive was used in the chainsaw's water supply. Cutting was performed on a free-standing concrete wall in a covered outdoor lab with a hand-held, gas-powered, concrete-cutting chainsaw. Air was sampled at the operator's lapel, and around the concrete wall to simulate nearby personnel. Two additive concentrations were tested (2.0% and 0.2%), across a range of fluid flow rates (0.38-3.8 Lpm [0.1-1.0 gpm] at 0.38 Lpm [0.1 gpm] increments). Results indicate that when a lower concentration of additive is used exposure levels increase. However, all exposure levels, once adjusted for 3 hours of continuous cutting in an 8-hour work shift, are below the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 5 mg/m(3). Estimates were made using trend lines to predict the fluid flow rates that would cause respirable dust exposure to exceed both the OSHA PEL and the American Conference of Governmental Industrial Hygienists (ACGIH®) threshold limit value (TLV).

  17. Magneto-optical study of uranium additions to amorphous TbxFe1 - x

    NASA Astrophysics Data System (ADS)

    Dillon, J. F., Jr.; van Dover, R. B.; Hong, M.; Gyorgy, E. M.; Albiston, S. D.

    1987-02-01

    Recent reports of huge magneto-optical Kerr rotations in certain crystalline metallic uranium compounds prompted a study of the magnetic and magneto-optical effects of uranium additions to a rare-earth transition metal amorphous alloy. Using variable composition samples, the polar Kerr effect at a small spot (e.g., 0.5 mm diam) was measured as field, temperature, and composition were varied. Points on the Curie line and the edges of the compensation region were determined from these observations. The compositions studied included (TbxFe1-x)1-yUy with 0.125≤x≤0.550 and y=0.0, 0.04, 0.07, 0.16. The addition of uranium to TbxFe1-x depresses the TC of Tb-rich material much more strongly than that of Tb-poor material. The compensation region does not shift at all with increasing y. It appears that uranium does not contribute to the magnetization of these amorphous alloys, nor does it significantly affect the magneto-optical effects.

  18. Demonstration of digital radiographs by means of ink jet-printed paper copies: pilot study.

    PubMed

    Kirkhorn, T; Kehler, M; Nilsson, J; Lyttkens, K; Andersson, B; Holmer, N G

    1992-11-01

    Different digital medical images have been printed on paper with a continuous ink jet printer, and the quality has been evaluated. The emphasis has been on digital chest radiographs from a computed radiography system. The ink jet printing technique is described as well as the handling of the image data from image source to printer. Different versions of paper prints and viewing conditions were compared to find the optimum alternative. The evaluation has been performed to maximize the quality of the paper images to make them conform with the corresponding film prints and monitor images as much as possible. The continuous ink jet technique offers high-quality prints on paper at a considerably lower cost per copy compared with the cost of a film print. With a future switch-over from diagnosing of digital images on film to diagnosing them on monitors, hard copies for demonstration purposes will occasionally be needed. This need can be filled by ink jet-printed paper copies.

  19. Characterization studies on the additives mixed L-arginine phosphate monohydrate (LAP) crystals

    NASA Astrophysics Data System (ADS)

    Haja Hameed, A. S.; Karthikeyan, C.; Ravi, G.; Rohani, S.

    2011-04-01

    L-arginine phosphate monohydrate (LAP), potassium thiocyanate (KSCN) mixed LAP (LAP:KSCN) and sodium sulfite (Na 2SO 3) mixed LAP (LAP:Na 2SO 3) single crystals were grown by slow cooling technique. The effect of microbial contamination and coloration on the growth solutions was studied. The crystalline powders of the grown crystals were examined by X-ray diffraction and the lattice parameters of the crystals were estimated. From the FTIR spectroscopic analysis, various functional group frequencies associated with the crystals were assigned. Vickers microhardness studies were done on {1 0 0} faces for pure and additives mixed LAP crystals. From the preliminary surface second harmonic generation (SHG) results, it was found that the SHG intensity at (1 0 0) face of LAP:KSCN crystal was much stronger than that of pure LAP.

  20. The guanidine and maleic acid (1:1) complex. The additional theoretical and experimental studies

    NASA Astrophysics Data System (ADS)

    Drozd, Marek; Dudzic, Damian

    2012-04-01

    On the basis of experimental literature data the theoretical studies for guanidinium and maleic acid complex with using DFT method are performed. In these studies the experimental X-ray data for two different forms of investigated crystal were used. During the geometry optimization process one equilibrium structure was found, only. According to this result the infrared spectrum for one theoretical molecule was calculated. On the basis of potential energy distribution (PED) analysis the clear-cut assignments of observed bands were performed. For the calculated molecule with energy minimum the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were obtained and graphically illustrated. The energy difference (GAP) between HOMO and LUMO was analyzed. Additionally, the nonlinear properties of this molecule were calculated. The α and β (first and second order) hyperpolarizability values are obtained. On the basis of these results the title crystal was classified as new second order NLO generator.

  1. DEMONSTRATION OF LOW COST, LOW BURDEN EXPOSURE MONITORING STRATEGIES FOR USE IN LONGITUDINAL COHORT STUDIES

    EPA Science Inventory

    A large longitudinal cohort study designed to evaluate the association between children's exposures to environmental agents and health outcomes presents many challenges for exposure monitoring. Exposure of the child must be measured for multiple chemicals through multiple path...

  2. Prazosin addition to fluvoxamine: A preclinical study and open clinical trial in OCD.

    PubMed

    Feenstra, Matthijs G P; Klompmakers, André; Figee, Martijn; Fluitman, Sjoerd; Vulink, Nienke; Westenberg, Herman G M; Denys, Damiaan

    2016-02-01

    The efficacy of selective serotonin reuptake inhibitors (SRIs) in psychiatric disorders may be "augmented" through the addition of atypical antipsychotic drugs. A synergistic increase in dopamine (DA) release in the prefrontal cortex has been suggested to underlie this augmentation effect, though the mechanism of action is not clear yet. We used in vivo microdialysis in rats to study DA release following the administration of combinations of fluvoxamine (10 mg/kg) and quetiapine (10 mg/kg) with various monoamine-related drugs. The results confirmed that the selective 5-HT1A antagonist WAY-100635 (0.05 mg/kg) partially blocked the fluvoxamine-quetiapine synergistic effect (maximum DA increase dropped from 325% to 214%). A novel finding is that the α1-adrenergic blocker prazosin (1 mg/kg), combined with fluvoxamine, partially mimicked the effect of augmentation (maximum DA increase 205%; area-under-the-curve 163%). As this suggested that prazosin augmentation might be tested in a clinical study, we performed an open clinical trial of prazosin 20 mg addition to SRI in therapy-resistant patients with obsessive-compulsive disorder applying for neurosurgery. A small, non-significant reduction in Yale Brown Obsessive Compulsive Scale (Y-BOCS) scores was observed in 10 patients and one patient was classified as a responder with a reduction in Y-BOCS scores of more than 25%. We suggest that future clinical studies augmenting SRIs with an α1-adrenergic blocker in less treatment resistant cases should be considered. The clinical trial "Prazosin in combination with a serotonin reuptake inhibitor for patients with Obsessive Compulsive disorder: an open label study" was registered at 24/05/2011 under trial number ISRCTN61562706: http://www.controlled-trials.com/ISRCTN61562706. PMID:26712326

  3. High temperature range recuperator. Phase II. Prototype demonstration and material and analytical studies. Final report

    SciTech Connect

    1980-04-01

    A summary of the work performed to fully evaluate the commercial potential of a unique ceramic recuperator for use in recovering waste heat from high temperature furnace exhaust gases is presented. The recuperator concept being developed consists of a vertical cylindrical heat exchange column formed from modular sections. Within the column, the gasketed modules form two helical flow passages - one for high temperature exhaust gases and one for pre-heating combustion air. The column is operated in a counterflow mode, with the exhaust gas entering at the bottom and the combustion air entering at the top of the column. Activities included design and procurement of prototype recuperator modules, construction and testing of two prototype recuperator assemblies, exposure and mechanical properties testing of candidate materials, structural analysis of the modules, and assessment of the economic viability of the concept. The results of the project indicated that the proposed recuperator concept was feasible from a technical standpoint. Economic analysis based upon recuperator performance characteristics and module manufacturing costs defined during the program indicated that 3 to 10 years (depending upon pre-heat temperature) would be required to recover the capital cost of the system in combustion air preheat applications. At this stage in the development of the recuperator, many factors in the analysis had to be assumed. Significant changes in some of the assumptions could dramatically affect the economics. For example, utilizing $2.85 per mcf for the natural gas price (as opposed to $2.00 per mcf) could reduce the payback period by more than half in certain cases. In addition, future commercial application will depend upon ceramic component manufacturing technique advances and cost reduction.

  4. Impact of contacting study authors to obtain additional data for systematic reviews: diagnostic accuracy studies for hepatic fibrosis

    PubMed Central

    2014-01-01

    Background Seventeen of 172 included studies in a recent systematic review of blood tests for hepatic fibrosis or cirrhosis reported diagnostic accuracy results discordant from 2 × 2 tables, and 60 studies reported inadequate data to construct 2 × 2 tables. This study explores the yield of contacting authors of diagnostic accuracy studies and impact on the systematic review findings. Methods Sixty-six corresponding authors were sent letters requesting additional information or clarification of data from 77 studies. Data received from the authors were synthesized with data included in the previous review, and diagnostic accuracy sensitivities, specificities, and positive and likelihood ratios were recalculated. Results Of the 66 authors, 68% were successfully contacted and 42% provided additional data for 29 out of 77 studies (38%). All authors who provided data at all did so by the third emailed request (ten authors provided data after one request). Authors of more recent studies were more likely to be located and provide data compared to authors of older studies. The effects of requests for additional data on the conclusions regarding the utility of blood tests to identify patients with clinically significant fibrosis or cirrhosis were generally small for ten out of 12 tests. Additional data resulted in reclassification (using median likelihood ratio estimates) from less useful to moderately useful or vice versa for the remaining two blood tests and enabled the calculation of an estimate for a third blood test for which previously the data had been insufficient to do so. We did not identify a clear pattern for the directional impact of additional data on estimates of diagnostic accuracy. Conclusions We successfully contacted and received results from 42% of authors who provided data for 38% of included studies. Contacting authors of studies evaluating the diagnostic accuracy of serum biomarkers for hepatic fibrosis and cirrhosis in hepatitis C patients

  5. A study of pyrazines in cigarettes and how additives might be used to enhance tobacco addiction

    PubMed Central

    Alpert, Hillel R; Agaku, Israel T; Connolly, Gregory N

    2016-01-01

    Background Nicotine is known as the drug that is responsible for the addicted behaviour of tobacco users, but it has poor reinforcing effects when administered alone. Tobacco product design features enhance abuse liability by (A) optimising the dynamic delivery of nicotine to central nervous system receptors, and affecting smokers’ withdrawal symptoms, mood and behaviour; and (B) effecting conditioned learning, through sensory cues, including aroma, touch and visual stimulation, to create perceptions of pending nicotine reward. This study examines the use of additives called ‘pyrazines’, which may enhance abuse potential, their introduction in ‘lights’ and subsequently in the highly market successful Marlboro Lights (Gold) cigarettes and eventually many major brands. Methods We conducted internal tobacco industry research using online databases in conjunction with published scientific literature research, based on an iterative feedback process. Results Tobacco manufacturers developed the use of a range of compounds, including pyrazines, in order to enhance ‘light’ cigarette products’ acceptance and sales. Pyrazines with chemosensory and pharmacological effects were incorporated in the first ‘full-flavour, low-tar’ product achieving high market success. Such additives may enhance dependence by helping to optimise nicotine delivery and dosing and through cueing and learned behaviour. Conclusions Cigarette additives and ingredients with chemosensory effects that promote addiction by acting synergistically with nicotine, increasing product appeal, easing smoking initiation, discouraging cessation or promoting relapse should be regulated by the US Food and Drug Administration. Current models of tobacco abuse liability could be revised to include more explicit roles with regard to non-nicotine constituents that enhance abuse potential. PMID:26063608

  6. Rate constants of hydroperoxyl radical addition to cyclic nitrones: a DFT study.

    PubMed

    Villamena, Frederick A; Merle, John K; Hadad, Christopher M; Zweier, Jay L

    2007-10-01

    Nitrones are potential synthetic antioxidants against the reduction of radical-mediated oxidative damage in cells and as analytical reagents for the identification of HO2* and other such transient species. In this work, the PCM/B3LYP/6-31+G(d,p)//B3LYP/6-31G(d) and PCM/mPW1K/6-31+G(d,p) density functional theory (DFT) methods were employed to predict the reactivity of HO2* with various functionalized nitrones as spin traps. The calculated second-order rate constants and free energies of reaction at both levels of theory were in the range of 100-103 M-1 s-1 and 1 to -12 kcal mol-1, respectively, and the rate constants for some nitrones are on the same order of magnitude as those observed experimentally. The trend in HO2* reactivity to nitrones could not be explained solely on the basis of the relationship of the theoretical positive charge densities on the nitronyl-C, with their respective ionization potentials, electron affinities, rate constants, or free energies of reaction. However, various modes of intramolecular H-bonding interaction were observed at the transition state (TS) structures of HO2* addition to nitrones. The presence of intramolecular H-bonding interactions in the transition states were predicted and may play a significant role toward a facile addition of HO2* to nitrones. In general, HO2* addition to ethoxycarbonyl- and spirolactam-substituted nitrones, as well as those nitrones without electron-withdrawing substituents, such as 5,5-dimethyl-pyrroline N-oxide (DMPO) and 5-spirocyclopentyl-pyrroline N-oxide (CPPO), are most preferred compared to the methylcarbamoyl-substituted nitrones. This study suggests that the use of specific spin traps for efficient trapping of HO2* could pave the way toward improved radical detection and antioxidant protection. PMID:17845014

  7. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1979-01-01

    Presents a recipe for the Nylon Rope Trick, which is considered to be one of the most spectacular demonstrations in chemistry. Materials for growing the polymer and some safety precautions are given. (SA)

  8. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L.

    1990-01-01

    Included are three demonstrations that include the phase change of ice when under pressure, viscoelasticity and colloid systems, and flame tests for metal ions. The materials, procedures, probable results, and applications to real life situations are included. (KR)

  9. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Describes two demonstrations suitable for chemistry instruction. One involves fractal structures obtained by electrodeposition of silver at an air-water interface and the other deals with molecular weights and music. (TW)

  10. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1986-01-01

    Background information, list of materials needed, and procedures used are provided for a demonstration involving the transformation of a hydrophobic liquid to a partially hydrophobic semisolid. Safety considerations are noted. (JN)

  11. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Roffia, Sergio; And Others

    1988-01-01

    Reports two electrochemical demonstrations. Uses a hydrogen-oxygen fuel cell to power a clock. Includes description of methods and materials. Investigates the "potato clock" used with different fruits. Lists emf and current for various fruit and electrode combinations. (ML)

  12. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1980-01-01

    Presented is a Corridor Demonstration which can be set up in readily accessible areas such as hallways or lobbies. Equipment is listed for a display of three cells (solar cells, fuel cells, and storage cells) which develop electrical energy. (CS)

  13. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Rehfeld, D. W.; And Others

    1988-01-01

    Describes two demonstrations (1) a dust explosion using a coffee can, candle, rubber tubing, and cornstarch and (2) forming a silicate-polyvinyl alcohol polymer which can be pressed into plastic sheets or molded. Gives specific instructions. (MVL)

  14. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1979-01-01

    Two demonstrations are presented: a verification of the discontinuity of matter based on the law of definite proportions, and a series of consecutive chemical reactions featuring reversible equilibria. (BB)

  15. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Presents three demonstrations suitable for undergraduate chemistry classes. Focuses on experiments with calcium carbide, the induction by iron of the oxidation of iodide by dichromate, and the classical iodine clock reaction. (ML)

  16. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L.

    1982-01-01

    Two demonstrations are described: (1) a sunset effect using a gooseneck lamp and 20 sheets of paper and (2) the preparation and determination of structural features of dimethyl sulfoxide (DMSO) by infrared spectroscopy. (SK)

  17. Tested Demonstrations

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1977-01-01

    Describes a room-temperature method for demonstrating phosphorescence by including samples in a polymer matrix. Also discusses the Old Nassau Reaction, a clock reaction which turns orange then black. (MLH)

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1988-01-01

    Describes two demonstrations for use in college chemistry classes. Includes "Spectroscopy in Large Lecture Halls" and "The Endothermic Dissolution of Ammonium Nitrate." Gives materials lists and procedures as well as a discussion of the results. (CW)

  19. DESIGN OF A SURFACTANT REMEDIATION FIELD DEMONSTRATION BASED ON LABORATORY AND MODELINE STUDIES

    EPA Science Inventory

    Surfactant-enhanced subsurface remediation is being evaluated as an innovative technology for expediting ground-water remediation. This paper reports on laboratory and modeling studies conducted in preparation for a pilot-scale field test of surfactant-enhanced subsurface remedia...

  20. The Adult Teacher Competencies Study. Final Report. A 353 Special Demonstration Project.

    ERIC Educational Resources Information Center

    Royce, Sherry

    A study was conducted to develop a set of instructor standards that describe high-quality teaching behavior for adult literacy teachers, program administrators, state staff, and stakeholders. The standards were created by a task force of 15 experienced adult literacy practitioners and reviewed and revised by focus groups of practitioners at seven…

  1. The Warm-Cold Study: A Classroom Demonstration of Impression Formation.

    ERIC Educational Resources Information Center

    Symbaluk, Diane G.; Cameron, Judy

    1998-01-01

    Describes a procedure for teaching experimental design to students in the social sciences. Argues that by replicating Solomon Asch's and H. Kelley's classic studies on impression formation, students learn how to conduct experiments, analyze data, and evaluate the significance of research. Provides instructions for implementing the strategy. (DSK)

  2. DEMONSTRATION OF FUEL CELLS TO RECOVER ENERGY FROM LANDFILL GAS - PHASE I FINAL REPORT: CONCEPTUAL STUDY

    EPA Science Inventory

    The report discusses results of a conceptual design, cost, and evaluation study of energy recovery from landfill gas using a commercial phosphoric acid fuel cell power plant. The conceptual design of the fuel cell energy recovery system is described, and its economic and environm...

  3. Additional follow-up telephone counselling and initial smoking relapse: a longitudinal, controlled study

    PubMed Central

    Wu, Lei; He, Yao; Jiang, Bin; Zuo, Fang; Liu, Qinghui; Zhang, Li; Zhou, Changxi

    2016-01-01

    Objectives Smoking cessation services can help smokers to quit; however, many smoking relapse cases occur over time. Initial relapse prevention should play an important role in achieving the goal of long-term smoking cessation. Several studies have focused on the effect of extended telephone support in relapse prevention, but the conclusions remain conflicting. Design and setting From October 2008 to August 2013, a longitudinal, controlled study was performed in a large general hospital of Beijing. Participants The smokers who sought treatment at our smoking cessation clinic were non-randomised and divided into 2 groups: face-to-face individual counselling group (FC group), and face-to-face individual counselling plus telephone follow-up counselling group (FCF group). No pharmacotherapy was offered. Outcomes The timing of initial smoking relapse was compared between FC and FCF groups. Predictors of initial relapse were investigated during the first 180 days, using the Cox proportional hazards model. Results Of 547 eligible male smokers who volunteered to participate, 457 participants (117 in FC group and 340 in FCF group) achieved at least 24 h abstinence. The majority of the lapse episodes occurred during the first 2 weeks after the quit date. Smokers who did not receive the follow-up telephone counselling (FC group) tended to relapse to smoking earlier than those smokers who received the additional follow-up telephone counselling (FCF group), and the log-rank test was statistically significant (p=0.003). A Cox regression model showed that, in the FCF group, being married, and having a lower Fagerström test score, normal body mass index and doctor-diagnosed tobacco-related chronic diseases, were significantly independent protective predictors of smoking relapse. Conclusions Within the limitations of this study, it can be concluded that additional follow-up telephone counselling might be an effective strategy in preventing relapse. Further research is still

  4. Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology

    PubMed Central

    2014-01-01

    Background This study aimed to establish surgical guiding techniques for completing mandible lesion resection and reconstruction of the mandible defect area with fibula sections in one surgery by applying additive manufacturing technology, which can reduce the surgical duration and enhance the surgical accuracy and success rate. Methods A computer assisted mandible reconstruction planning (CAMRP) program was used to calculate the optimal cutting length and number of fibula pieces and design the fixtures for mandible cutting, registration, and arrangement of the fibula segments. The mandible cutting and registering fixtures were then generated using an additive manufacturing system. The CAMRP calculated the optimal fibula cutting length and number of segments based on the location and length of the defective portion of the mandible. The mandible cutting jig was generated according to the boundary surface of the lesion resection on the mandible STL model. The fibular cutting fixture was based on the length of each segment, and the registered fixture was used to quickly arrange the fibula pieces into the shape of the defect area. In this study, the mandibular lesion was reconstructed using registered fibular sections in one step, and the method is very easy to perform. Results and conclusion The application of additive manufacturing technology provided customized models and the cutting fixtures and registered fixtures, which can improve the efficiency of clinical application. This study showed that the cutting fixture helped to rapidly complete lesion resection and fibula cutting, and the registered fixture enabled arrangement of the fibula pieces and allowed completion of the mandible reconstruction in a timely manner. Our method can overcome the disadvantages of traditional surgery, which requires a long and different course of treatment and is liable to cause error. With the help of optimal cutting planning by the CAMRP and the 3D printed mandible resection jig and

  5. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    SciTech Connect

    Stierum, Rob . E-mail: stierum@voeding.tno.nl; Heijne, Wilbert; Kienhuis, Anne; Ommen, Ben van; Groten, John

    2005-09-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicological assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole.

  6. Resources allocation in healthcare for cancer: a case study using generalised additive mixed models.

    PubMed

    Musio, Monica; Sauleau, Erik A; Augustin, Nicole H

    2012-11-01

    Our aim is to develop a method for helping resources re-allocation in healthcare linked to cancer, in order to replan the allocation of providers. Ageing of the population has a considerable impact on the use of health resources because aged people require more specialised medical care due notably to cancer. We propose a method useful to monitor changes of cancer incidence in space and time taking into account two age categories, according to healthcar general organisation. We use generalised additive mixed models with a Poisson response, according to the methodology presented in Wood, Generalised additive models: an introduction with R. Chapman and Hall/CRC, 2006. Besides one-dimensional smooth functions accounting for non-linear effects of covariates, the space-time interaction can be modelled using scale invariant smoothers. Incidence data collected by a general cancer registry between 1992 and 2007 in a specific area of France is studied. Our best model exhibits a strong increase of the incidence of cancer along time and an obvious spatial pattern for people more than 70 years with a higher incidence in the central band of the region. This is a strong argument for re-allocating resources for old people cancer care in this sub-region. PMID:23242683

  7. Covalent binding of aniline to humic substances. 2. 15N NMR studies of nucleophilic addition reactions

    USGS Publications Warehouse

    Thorn, K.A.; Pettigrew, P.J.; Goldenberg, W.S.; Weber, E.J.

    1996-01-01

    Aromatic amines are known to undergo covalent binding with humic substances in the environment. Although previous studies have examined reaction conditions and proposed mechanisms, there has been no direct spectroscopic evidence for the covalent binding of the amines to the functional groups in humic substances. In order to further elucidate the reaction mechanisms, the Suwannee River and IHSS soil fulvic and humic acids were reacted with 15N-labeled aniline at pH 6 and analyzed using 15N NMR spectrometry. Aniline underwent nucleophilic addition reactions with the quinone and other carbonyl groups in the samples and became incorporated in the form of anilinohydroquinone, anilinoquinone, anilide, imine, and heterocyclic nitrogen, the latter comprising 50% or more of the bound amine. The anilide and anilinohydroquinone nitrogens were determined to be susceptible to chemical exchange by ammonia. In the case of Suwannee River fulvic acid, reaction under anoxic conditions and pretreatment with sodium borohydride or hydroxylamine prior to reaction under oxic conditions resulted in a decrease in the proportion of anilinohydroquinone nitrogen incorporated. The relative decrease in the incorporation of anilinohydroquinone nitrogen with respect to anilinoquinone nitrogen under anoxic conditions suggested that inter- or intramolecular redox reactions accompanied the nucleophilic addition reactions.

  8. Studies on the reuse of waste printed circuit board as an additive for cement mortar.

    PubMed

    Ban, Bong-Chan; Song, Jong-Yoon; Lim, Joong-Yeon; Wang, Soo-Kyoon; An, Kwang-Guk; Kim, Dong-Su

    2005-01-01

    The recent development in electronic industries has generated a drastic increase in production of printed circuit boards (PCB). Accordingly, the amount of waste PCB from electronic productions and waste electronics and its environmental impact such as soil and groundwater contamination have become a great concern. This study aims to propose a method for reuse of waste PCB as an additive for cement mortar. Although the expansibility of waste PCB powder finer than 0.08 mm in water was observed to be greater than 2.0%, the maximum expansion rates in water for 0.08 to approximately 0.15 and 0.15 to approximately 0.30 mm sized PCB powders were less than 2.0%, which satisfied the necessary condition as an alternative additive for cement mortar in place of sand. The difference in the compressive strength of standard mortar and waste PCB added mortar was observed to be less than 10% and their difference was expected to be smaller after prolonged aging. The durability of waste PCB added cement mortar was also examined through dry/wet conditioning cyclic tests and acidic/alkaline conditioning tests. From the tests, both weight and compressive strength of cement mortar were observed to be recovered with aging. The leaching test for heavy metals from waste PCB added mortar showed that no heavy metal ions such as copper, lead, or cadmium were detected in the leachate, which resulted from fixation effect of the cement hydrates.

  9. Assessment of Nano Cellulose from Peach Palm Residue as Potential Food Additive: Part II: Preliminary Studies.

    PubMed

    Andrade, Dayanne Regina Mendes; Mendonça, Márcia Helena; Helm, Cristiane Vieira; Magalhães, Washington L E; de Muniz, Graciela Ines Bonzon; Kestur, Satyanarayana G

    2015-09-01

    High consumption of dietary fibers in the diet is related to the reduction of the risk of non-transmitting of chronic diseases, prevention of the constipation etc. Rich diets in dietary fibers promote beneficial effects for the metabolism. Considering the above and recognizing the multifaceted advantages of nano materials, there have been many attempts in recent times to use the nano materials in the food sector including as food additive. However, whenever new product for human and animal consumption is developed, it has to be tested for their effectiveness regarding improvement in the health of consumers, safety aspects and side effects. However, before it is tried with human beings, normally such materials would be assessed through biological tests on a living organism to understand its effect on health condition of the consumer. Accordingly, based on the authors' finding reported in a previous paper, this paper presents body weight, biochemical (glucose, cholesterol and lipid profile in blood, analysis of feces) and histological tests carried out with biomass based cellulose nano fibrils prepared by the authors for its possible use as food additive. Preliminary results of the study with mice have clearly brought out potential of these fibers for the said purpose. PMID:26344977

  10. Resources allocation in healthcare for cancer: a case study using generalised additive mixed models.

    PubMed

    Musio, Monica; Sauleau, Erik A; Augustin, Nicole H

    2012-11-01

    Our aim is to develop a method for helping resources re-allocation in healthcare linked to cancer, in order to replan the allocation of providers. Ageing of the population has a considerable impact on the use of health resources because aged people require more specialised medical care due notably to cancer. We propose a method useful to monitor changes of cancer incidence in space and time taking into account two age categories, according to healthcar general organisation. We use generalised additive mixed models with a Poisson response, according to the methodology presented in Wood, Generalised additive models: an introduction with R. Chapman and Hall/CRC, 2006. Besides one-dimensional smooth functions accounting for non-linear effects of covariates, the space-time interaction can be modelled using scale invariant smoothers. Incidence data collected by a general cancer registry between 1992 and 2007 in a specific area of France is studied. Our best model exhibits a strong increase of the incidence of cancer along time and an obvious spatial pattern for people more than 70 years with a higher incidence in the central band of the region. This is a strong argument for re-allocating resources for old people cancer care in this sub-region.

  11. Mechanisms on electrical breakdown strength increment of polyethylene by aromatic carbonyl compounds addition: a theoretical study.

    PubMed

    Zhang, Hui; Shang, Yan; Wang, Xuan; Zhao, Hong; Han, Baozhong; Li, Zesheng

    2013-12-01

    A theoretical investigation is accomplished on the mechanisms of electrical breakdown strength increment of polyethylene at the atomic and molecular levels. It is found that the addition of aromatic carbonyl compounds as voltage stabilizers is one of the important factors for increasing electrical breakdown strength of polyethylene, as the additives can trap hot electrons, obtain energy of hot electrons, and transform the aliphatic cation to relatively stable aromatic cation to prevent the degradation of the polyethylene matrix. The HOMO-LUMO energy gaps (E(g)), the ionization potentials (IPs), and electron affinities (EAs) at the ground states of a series of aromatic carbonyl compounds are obtained at the B3LYP/6-311+G(d,p) level. The theoretical results are in good agreement with the available experimental findings, show that 2,4-dioctyloxybenzophenone (Bzo) and 4,4'-didodecyloxybenzil (Bd) molecules can effectively increase the electrical breakdown strength when they are doped into polyethylene because of their much smaller E g values than all the other studied aromatic carbonyl molecules and excellent compatibility with polymers matrix.

  12. A study of New York City obstetrics units demonstrates the potential for reducing hospital inpatient capacity.

    PubMed

    Green, Linda V; Liu, Nan

    2015-04-01

    Hospitals are under significant pressure from payers to reduce costs. The single largest fixed cost for a hospital is inpatient beds, yet there is significant variation in hospital capacity utilization. We study bed capacity in New York City hospital obstetrics units and find that while many hospitals have an insufficient number of beds to provide timely access to care, overall there is significant excess capacity. Our findings, coupled with current demographic and clinical practice trends, indicate that a large fraction of obstetrics units nationwide could likely reduce their bed capacity while assuring timely access to care, resulting in large savings in capital and staffing costs. Given emerging health care delivery and payment models that will likely decrease demand for other types of hospital beds, our study suggests that data-based methodologies should be used by hospitals and policy makers to identify opportunities for reducing excess bed capacity in other inpatient units as well.

  13. CINRG Duchenne Natural History Study demonstrates insufficient diagnosis and treatment of cardiomyopathy in Duchenne muscular dystrophy

    PubMed Central

    Spurney, Christopher; Shimizu, Reiko; Hache, Lauren P.; Kolski, Hanna; Gordish-Dressman, Heather; Clemens, Paula R.

    2014-01-01

    Introduction Cardiomyopathy is a common cause of morbidity and death in patients with Duchenne muscular dystrophy (DMD). Methods A cross-sectional analysis of clinical data from a multi-institutional, international CINRG DMD Natural History Study of 340 DMD patients aged 2 to 28 years. Cardiomyopathy was defined as shortening fraction (SF) <28% or ejection fraction (EF) <55%. Results 231 participants reported a prior clinical echocardiogram study, and 174 had data for SF or EF. The prevalence of cardiomyopathy was 27% (47/174), and it was significantly associated with age and clinical stage. The association of cardiomyopathy with age and clinical stage was not changed by glucocorticoid use as a covariate (P>0.68). In patients with cardiomyopathy, 57 % (27/47) reported not taking any cardiac medications. Cardiac medications were used in 12% (15/127) of patients without cardiomyopathy. Discussion Echocardiograms were underutilized, and cardiomyopathy was undertreated in this DMD natural history cohort. PMID:24395289

  14. Demonstration of multi- and single-reader sample size program for diagnostic studies software

    NASA Astrophysics Data System (ADS)

    Hillis, Stephen L.; Schartz, Kevin M.

    2015-03-01

    The recently released software Multi- and Single-Reader Sample Size Sample Size Program for Diagnostic Studies, written by Kevin Schartz and Stephen Hillis, performs sample size computations for diagnostic reader-performance studies. The program computes the sample size needed to detect a specified difference in a reader performance measure between two modalities, when using the analysis methods initially proposed by Dorfman, Berbaum, and Metz (DBM) and Obuchowski and Rockette (OR), and later unified and improved by Hillis and colleagues. A commonly used reader performance measure is the area under the receiver-operating-characteristic curve. The program can be used with typical common reader-performance measures which can be estimated parametrically or nonparametrically. The program has an easy-to-use step-by-step intuitive interface that walks the user through the entry of the needed information. Features of the software include the following: (1) choice of several study designs; (2) choice of inputs obtained from either OR or DBM analyses; (3) choice of three different inference situations: both readers and cases random, readers fixed and cases random, and readers random and cases fixed; (4) choice of two types of hypotheses: equivalence or noninferiority; (6) choice of two output formats: power for specified case and reader sample sizes, or a listing of case-reader combinations that provide a specified power; (7) choice of single or multi-reader analyses; and (8) functionality in Windows, Mac OS, and Linux.

  15. Expanding access to primary care without additional budgets? A case study from Burkina Faso.

    PubMed

    Marschall, Paul; Flessa, Steffen

    2008-11-01

    The aim of this study is to demonstrate the impact of increased access to primary care on provider costs in the rural health district of Nouna, Burkina Faso. This study question is crucial for health care planning in this district, as other research work shows that the population has a higher need for health care services. From a public health perspective, an increase of utilisation of first-line health facilities would be necessary. However, the governmental budget that is needed to finance improved access was not known. The study is based on data of 2004 of a comprehensive provider cost information system. This database provides us with the actual costs of each primary health care facility (Centre de Santé et de Promotion Sociale, CSPS) in the health district. We determine the fixed and variable costs of each institution and calculate the average cost per service unit rendered in 2004. Based on the cost structure of each CSPS, we calculate the total costs if the demand for health care services increased. We conclude that the total provider costs of primary care (and therefore the governmental budget) would hardly rise if the coverage of the population were increased. This is mainly due to the fact that the highest variable costs are drugs, which are fully paid for by the customers (Bamako Initiative). The majority of other costs are fixed. Consequently, health care reforms that improve access to health care institutions must not fear dramatically increasing the costs of health care services. PMID:18197447

  16. Study on Friction and Wear Properties of Silver Matrix Brush Material with Different Additives

    NASA Astrophysics Data System (ADS)

    Chen, Xiaoli; Wang, Wenfang; Hong, Yu; Wu, Yucheng

    2013-07-01

    Friction and wear processes of AgCuX (G, CF and AlN) composites-CuAgV alloy friction pair and effects of different additive content in silver based composite on friction and wear behavior are studied in this paper. The microstructure of the brush wear surface is observed by SEM. The results show that when graphite content is up to 9 wt.%, Ag-Cu-CF-G composite exhibits the best wear properties; when the content of aluminum nitride is up to 0.5 wt.%, Ag-Cu-AlN-G composites has the most comprehensive performance. The wear loss of both composites arises with the increase of both pressure and speed, but when speed reaches a critical value, the increased amplitude of wear loss tends to be steady.

  17. Comparative study of dimensional accuracy of different impression techniques using addition silicone impression material.

    PubMed

    Penaflor, C F; Semacio, R C; De Las Alas, L T; Uy, H G

    1998-01-01

    This study compared dimensional accuracy of the single, double with spacer, double with cut-out and double mix impression technique using addition silicone impression material. A typhodont containing Ivorine teeth model with six (6) full-crown tooth preparations were used as the positive control. Two stone replication models for each impression technique were made as test materials. Accuracy of the techniques were assessed by measuring four dimensions on the stone dies poured from the impression of the Ivorine teeth model. Results indicated that most of the measurements for the height, width and diameter slightly decreased and a few increased compared with the Ivorine teeth model. The double with cut-out and double mix technique presents the least difference from the master model as compared to the two latter impression techniques. PMID:10202524

  18. Study of cadmium, zinc and lead biosorption by orange wastes using the subsequent addition method.

    PubMed

    Pérez-Marín, A B; Ballester, A; González, F; Blázquez, M L; Muñoz, J A; Sáez, J; Zapata, V Meseguer

    2008-11-01

    The biosorption of several metals (Cd2+, Zn2+ and Pb2+) by orange wastes has been investigated in binary systems. Multicomponent sorption isotherms were obtained using an original procedure, similar to that proposed by Pagnanelli et al. [Pagnanelli, F., Petrangeli, M.P., Toro, L., Trifoni, M., Veglio, F., 2001a. Biosorption of metal ions on Arthrobacter sp.: biomass characterization and biosorption modelling. Environ. Sci. Technol. 34, 2773-2778] for monoelement systems, known as subsequent addition method (SAM). Experimental sorption data were analysed using an extended multicomponent Langmuir equation. The maximum sorption uptake was approximately 0.25mmol/g for the three binary systems studied. The reliability of the proposed procedure for obtaining the equilibrium data in binary systems was verified by means of a statistical F-test. PMID:18440805

  19. Spectroscopic studies of nucleic acid additions during seed-mediated growth of gold nanoparticles

    PubMed Central

    Tapp, Maeling; Sullivan, Rick; Dennis, Patrick; Naik, Rajesh R.

    2015-01-01

    The effect of adding nucleic acids to gold seeds during the growth stage of either nanospheres or nanorods was investigated using UV-Vis spectroscopy to reveal any oligonucleotide base or structure-specific effects on nanoparticle growth kinetics or plasmonic signatures. Spectral data indicate that the presence of DNA duplexes during seed ageing drastically accelerated nanosphere growth while the addition of single-stranded polyadenine at any point during seed ageing induces nanosphere aggregation. For seeds added to a gold nanorod growth solution, single-stranded polythymine induces a modest blue-shift in the longitudinal peak wavelength. Moreover, a particular sequence comprised of 50% thymine bases was found to induce a faster, more dramatic blue-shift in the longitudinal peak wavelength compared to any of the homopolymer incubation cases. Monomeric forms of the nucleic acids, however, do not yield discernable spectral differences in any of the gold suspensions studied. PMID:25960601

  20. Rapid identification of color additives, using the C18 cartridge: collaborative study.

    PubMed

    Young, M L

    1988-01-01

    Nine laboratories collaboratively studied a method for the separation and identification of the 7 permitted FD&C color additives (Red Nos. 3 and 40; Blue Nos. 1 and 2; Yellow Nos. 5 and 6; Green No. 3) and the banned FD&C Red No. 2 in foods. The method is based on use of a commercial C18 cartridge and spectrophotometry or thin layer chromatography. Collaborators analyzed 5 commercial products (noodles, candy, carbonated soda, flavored gelatin, and powdered drink) and 2 dye mixtures (one containing FD&C Red Nos. 2, 3, and 40; the other containing FD&C Green No. 3 and Red No. 3). All of the colors were identified with little or no difficulty by 8 collaborators. The method has been adopted official first action.

  1. "Ready To Learn" Transmedia Demonstration Station Study: A Report to the CPB-PBS "Ready to Learn Initiative"

    ERIC Educational Resources Information Center

    Pasnik, Shelley; Llorente, Carlin

    2012-01-01

    The 2012 Transmedia Demonstration Stations program study is part of the multiyear CPB-PBS "Ready To Learn" summative evaluation initiative by Education Development Center, Inc., (EDC) and SRI International (SRI). Through a series of related studies, the authors are documenting, and, whenever possible, measuring the impact of PBS KIDS transmedia…

  2. 78 FR 63477 - Guidance for Industry on Active Controls in Studies To Demonstrate Effectiveness of a New Animal...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-24

    ... investigators who conduct studies using active controls and have a basic understanding of statistical principles... HUMAN SERVICES Food and Drug Administration Guidance for Industry on Active Controls in Studies To Demonstrate Effectiveness of a New Animal Drug for Use in Companion Animals; Availability AGENCY: Food...

  3. Dictyostelium discoideum to human cells: pharmacogenetic studies demonstrate a role for sphingolipids in chemoresistance.

    PubMed

    Alexander, Stephen; Min, Junxia; Alexander, Hannah

    2006-03-01

    Resistance to chemotherapy is a major obstacle for the treatment of cancer and a subject of extensive research. Numerous mechanisms of drug resistance have been proposed, and they differ for different drugs. Nevertheless, it is clear that our understanding of this important problem is still incomplete, and that new targets for modulating therapy still await discovery. The attractive biology and the availability of powerful molecular techniques have made the cellular slime mold Dictyostelium discoideum, a powerful non-mammalian model for drug target discovery, and the problem of drug resistance. To understand the molecular basis of chemoresistance to the widely used drug cisplatin, both genetic and pharmacological approaches have been applied to this versatile experimental system. These studies have resulted in the identification of novel molecular pathways which can be used to increase the efficacy of cisplatin, and brought attention to the role of sphingolipids in mediating the cellular response to chemotherapeutic drugs. In the following review, we will describe the history and utility of D. discoideum in pharmacogenetics, and discuss recent studies which focus attention on the role of sphingolipids in chemotherapy and chemoresistance. PMID:16403600

  4. A SEARCH FOR ADDITIONAL PLANETS IN FIVE OF THE EXOPLANETARY SYSTEMS STUDIED BY THE NASA EPOXI MISSION

    SciTech Connect

    Ballard, Sarah; Charbonneau, David; Holman, Matthew J.; Christiansen, Jessie L.; Deming, Drake; Barry, Richard K.; Kuchner, Marc J.; Livengood, Timothy A.; Hewagama, Tilak; Hampton, Don L.; Lisse, Carey M.; Seager, Sara; Veverka, Joseph F.

    2011-05-01

    We present time series photometry and constraints on additional planets in five of the exoplanetary systems studied by the EPOCh (Extrasolar Planet Observation and Characterization) component of the NASA EPOXI mission: HAT-P-4, TrES-3, TrES-2, WASP-3, and HAT-P-7. We conduct a search of the high-precision time series for photometric transits of additional planets. We find no candidate transits with significance higher than our detection limit. From Monte Carlo tests of the time series using putative periods from 0.5 days to 7 days, we demonstrate the sensitivity to detect Neptune-sized companions around TrES-2, sub-Saturn-sized companions in the HAT-P-4, TrES-3, and WASP-3 systems, and Saturn-sized companions around HAT-P-7. We investigate in particular our sensitivity to additional transits in the dynamically favorable 3:2 and 2:1 exterior resonances with the known exoplanets: if we assume coplanar orbits with the known planets, then companions in these resonances with HAT-P-4b, WASP-3b, and HAT-P-7b would be expected to transit, and we can set lower limits on the radii of companions in these systems. In the nearly grazing exoplanetary systems TrES-3 and TrES-2, additional coplanar planets in these resonances are not expected to transit. However, we place lower limits on the radii of companions that would transit if the orbits were misaligned by 2.{sup 0}0 and 1.{sup 0}4 for TrES-3 and TrES-2, respectively.

  5. A genome-wide association study demonstrates significant genetic variation for fracture risk in Thoroughbred racehorses

    PubMed Central

    2014-01-01

    Background Thoroughbred racehorses are subject to non-traumatic distal limb bone fractures that occur during racing and exercise. Susceptibility to fracture may be due to underlying disturbances in bone metabolism which have a genetic cause. Fracture risk has been shown to be heritable in several species but this study is the first genetic analysis of fracture risk in the horse. Results Fracture cases (n = 269) were horses that sustained catastrophic distal limb fractures while racing on UK racecourses, necessitating euthanasia. Control horses (n = 253) were over 4 years of age, were racing during the same time period as the cases, and had no history of fracture at the time the study was carried out. The horses sampled were bred for both flat and National Hunt (NH) jump racing. 43,417 SNPs were employed to perform a genome-wide association analysis and to estimate the proportion of genetic variance attributable to the SNPs on each chromosome using restricted maximum likelihood (REML). Significant genetic variation associated with fracture risk was found on chromosomes 9, 18, 22 and 31. Three SNPs on chromosome 18 (62.05 Mb – 62.15 Mb) and one SNP on chromosome 1 (14.17 Mb) reached genome-wide significance (p < 0.05) in a genome-wide association study (GWAS). Two of the SNPs on ECA 18 were located in a haplotype block containing the gene zinc finger protein 804A (ZNF804A). One haplotype within this block has a protective effect (controls at 1.95 times less risk of fracture than cases, p = 1 × 10-4), while a second haplotype increases fracture risk (cases at 3.39 times higher risk of fracture than controls, p = 0.042). Conclusions Fracture risk in the Thoroughbred horse is a complex condition with an underlying genetic basis. Multiple genomic regions contribute to susceptibility to fracture risk. This suggests there is the potential to develop SNP-based estimators for genetic risk of fracture in the Thoroughbred racehorse, using methods

  6. Lower Risk of Stroke after Deformity Surgery: Long Term Benefit Demonstrated by a National Cohort Study

    PubMed Central

    Huang, Liang-Chung; Chung, Wu-Fu; Liu, Shih-Wei; Chang, Peng-Yuan; Chen, Li-Fu; Wu, Jau-Ching; Chen, Yu-Chun; Huang, Wen-Cheng; Liu, Laura; Cheng, Henrich; Lo, Su-Shun

    2015-01-01

    Objectives: This study aimed to investigate the long-term risk of stroke in adult patients with spinal deformity. Specifically, the study addressed the possible protective effect of surgery for spinal deformity against stroke. Methods: Using the National Health Insurance Research Database (NHIRD), a monopolistic national database in Taiwan, this retrospective cohort study analyzed the incidence of stroke in patients with adult spinal deformity (ASD) in a 11-year period. A total of 13,503 patients, between 55 and 75 years old, were identified for the diagnosis of ASD. The patients were grouped into two: the surgical group (n = 10,439) who received spinal fusion surgery, and the control group (n = 2124) who received other medical treatment. The incidence rates of all subsequent cerebrovascular accidents, including ischemic and hemorrhagic strokes, were calculated. Hazard ratios for stroke were calculated use a full cohort and a propensity score matched cohort. Adjustments for co-morbidities that may predispose to stroke, including hypertension, diabetes mellitus, arrhythmia and coronary heart disease were conducted. Kaplan-Meier and Cox regression analyses were performed to compare the risk of stroke between the two groups. Results: During the total observation period of 50,450 person-years, the incidence rate of stroke in the surgical group (15.55 per 1000 person-years) was significantly lower than that of the control group (20.89 per 1000 person-years, p < 0.001). Stroke was more likely to occur in the control group than in the surgical group (crude hazard ratio 1.34, p < 0.001; adjusted HR 1.28, p < 0.001, by a propensity score matched model). Conclusions: In this national cohort of more than 13,000 ASD patients covering 10 years, stroke was approximately 25% less likely to happen in patients who underwent spinal fusion surgery than those who received medical management. Therefore, spinal fusion surgery may provide a protective effect against stroke in adult

  7. Demonstration of an advanced circulation fludized bed coal combustor phase 1: Cold model study. Final report

    SciTech Connect

    Govind, R.

    1993-03-20

    It was found that there was a strong dependence of the density profile on the secondary air injection location and that there was a pronounced solid separation from the conveying gas, due to the swirl motion. Furthermore, the swirl motion generated strong internal circulation patterns and higher slip velocities than in the case of nonswirl motion as in an ordinary circulating fluidized bed. Radial solids flux profiles were measured at different axial locations. The general radial profile in a swirling circulating fluidized bed indicated an increased downward flow of solids near the bed walls, and strong variations in radial profiles along the axial height. For swirl numbers less than 0.9, which is typical for swirling circulating fluidized beds, there is no significant increase in erosion due to swirl motion inside the bed. Pending further investigation of swirl motion with combustion, at least from our cold model studies, no disadvantages due to the introduction of swirl motion were discovered.

  8. Study of triallyl phosphate as an electrolyte additive for high voltage lithium-ion cells

    NASA Astrophysics Data System (ADS)

    Xia, J.; Madec, L.; Ma, L.; Ellis, L. D.; Qiu, W.; Nelson, K. J.; Lu, Z.; Dahn, J. R.

    2015-11-01

    The role of triallyl phosphate as an electrolyte additive in Li(Ni0.42Mn0.42Co0.16)O2/graphite pouch cells was studied using ex-situ gas measurements, ultra high precision coulometry, automated storage experiments, electrochemical impedance spectroscopy, long-term cycling and X-ray photoelectron spectroscopy. Cells containing triallyl phosphate produced less gas during formation, cycling and storage than control cells. The use of triallyl phosphate led to higher coulombic efficiency and smaller charge endpoint capacity slippage during ultra high precision charger testing. Cells containing triallyl phosphate showed smaller potential drop during 500 h storage at 40 °C and 60 °C and the voltage drop decreased as the triallyl phosphate content in the electrolyte increased. However, large amounts of triallyl phosphate (>3% by weight in the electrolyte) led to large impedance after cycling and storage. Symmetric cell studies showed large amounts of triallyl phosphate (5% or more) led to significant impedance increase at both negative and positive electrodes. X-ray photoelectron spectroscopy studies suggested that the high impedance came from the polymerization of triallyl phosphate molecules which formed thick solid electrolyte interphase films at the surfaces of both negative and positive electrodes. An optimal amount of 2%-3% triallyl phosphate led to better capacity retention during long term cycling.

  9. Intermittent flow system for population toxicity studies demonstrated with Daphnia and copper

    SciTech Connect

    van Leeuwen, C.J.; Buechner, J.L.; van Dijk, H. )

    1988-05-01

    Until the introduction of continuous-flow procedures, the physical aspects of testing the toxicity of chemicals and aqueous effluents to aquatic organisms had been of minor consideration. Today's devices ranging from pneumatic systems to electric pumps, all have some drawback or other but many of them are reduced to a minimum by the use of the proportional diluter, which is a well-established and reliable dosing apparatus. However, the Mount-Brungs diluter cannot be used for testing volatile chemicals, nor does it allow simultaneous dosing of a constant food suspension and several toxicant concentrations, which are important conditions for population toxicity studies with small invertebrates like the crustacean Daphnia magna. These restrictions are removed by the use of electric pumps, solenoids and time relays. The system described here provides for the delivery of 250 mL every 5 min to 6 h with no perceptible current-induced effects on the test organisms; it allows the automatic supply of known concentrations of food at each dilution cycle as well as the testing of volatile chemicals. In order to illustrate its usefulness in tests with Daphnia populations, the toxicity of copper was tested.

  10. Intermittent flow system for population toxicity studies demonstrated with Daphnia and copper

    SciTech Connect

    van Leeuwen, C.J.; Buechner, J.L.; van Dijk, H.

    1988-04-01

    Until the introduction of continuous-flow procedures, the physical aspects of testing the toxicity of chemicals and aqueous effluents to aquatic organisms had been of minor consideration. Today's devices ranging from pneumatic systems to electric pumps, all have some drawback or other but many of them are reduced to a minimum by the use of the proportional diluter, which is a well-established and reliable dosing apparatus. However, the Mount-Brungs diluter cannot be used for testing volatile chemicals, nor does it allow simultaneous dosing of a constant food suspension and several toxicant concentrations, which are important conditions for population toxicity studies with small invertebrates like the crustacean Daphnia magna. These restrictions are removed by the use of electric pumps, solenoids and time relays. The system described here provides for the delivery of 250 mL every 5 min to 6 h with no perceptible current-induced effects on the test organisms; it allows the automatic supply of known concentrations of food at each dilution cycle as well as the testing of volatile chemicals. The system has operated for almost 3 years and has proven to be reliable, accurate and easy to maintain. In order to illustrate its usefulness in tests with Daphnia populations, the toxicity of copper was tested.

  11. Development study of precooled-cycle hypersonic turbojet engine for flight demonstration

    NASA Astrophysics Data System (ADS)

    Sato, Tetsuya; Taguchi, Hideyuki; Kobayashi, Hiroaki; Kojima, Takayuki; Okai, Keiichi; Fujita, Kazuhisa; Masaki, Daisaku; Hongo, Motoyuki; Ohta, Toyohiko

    2007-06-01

    This paper describes a development study of a precooled-cycle hypersonic turbojet engine for the first stage of TSTO space plane and hypersonic airplane. With reflecting the key technologies accumulated from ATREX (expander cycle ATR engine) ground tests, the next flyable subscale engine "S-engine" is now developed. S-engine has 23cm×23cm of rectangular cross-section, 2.2 m of the overall length and about 100 kg of the weight employing a variable-geometry rectangular inlet and nozzle. It produces 1.2 kN of thrust at SLS, which corresponds to {1}/{4} of the ATREX engine. Design of the hypersonic components such as the inlet, precooler and nozzle has been finished and their aerodynamic performances were verified by wind tunnel tests and CFD analyses. A prototype model of the diagonal-flow compressor whose pressure ratio is 6 was manufactured. Its rotating tests under the very-low pressure conditions are now in progress. The reverse-flow annular combustion chamber was successfully tested. The first flight test of the S-engine is to be conducted in 2008 by the balloon-based operation vehicle (BOV) which is about 5 m in length, 0.55 m in diameter and 500 kg in weight. The vehicle is dropped from an altitude of 40 km by a high altitude balloon. After 40-s free-fall, the vehicle pulls up and S-engine operates for 30 s at about Mach 2. High altitude tests of the engine components corresponding to the BOV's flight condition have been conducted.

  12. Longitudinal and retrospective study has demonstrated morphometric variations in the fingerprints of elderly individuals.

    PubMed

    Silva, Lara Rosana Vieira; Mizokami, Leila Lopes; Vieira, Paola Rabello; Kuckelhaus, Selma Aparecida Souza

    2016-02-01

    Dermatoglyphics can be found in the thick skin of both hands and feet which make the identification process possible, however morphological changes throughout life can affect identification in elderly individuals. Considering that dermatoglyphics is an important biometric method, due to it being practical and inexpensive, this longitudinal and retrospective study was aimed to evaluate the morphological variations in fingerprints obtained from men and women (n=20) during their adult and elderly stages of life; the time between obtaining the two fingerprints was 33.5±9.4 years. For the morphometric analysis, an area of 1 cm(2) was selected to quantify the visible friction ridges, minutiae, interpapillary and white lines, and later side-by-side confrontation was used to determine the identity of the individuals. Our results showed a reduction of friction ridges, an increase in the number of white lines for the group (men and women) and a decrease in the number of interpapillary lines in the group of women. It also showed that the selection of compatible fingerprints by the automated AFIS/VRP system allowed the identification of 23 individuals (57.5%), but when the identification was made by the automated AFIS/VRP system, followed by the analysis of archived patterns to eliminate incompatible fingerprints, determination of the identity of 28 individuals (70.0%) was possible. The dermatoglyphics of the elderly suffered morphometric changes that prevented the identification of 30% of them, probably due to the aging process, and pointed to the importance of improving the methods of obtaining fingerprints to clarify issues related to the identification of the elderly.

  13. Longitudinal and retrospective study has demonstrated morphometric variations in the fingerprints of elderly individuals.

    PubMed

    Silva, Lara Rosana Vieira; Mizokami, Leila Lopes; Vieira, Paola Rabello; Kuckelhaus, Selma Aparecida Souza

    2016-02-01

    Dermatoglyphics can be found in the thick skin of both hands and feet which make the identification process possible, however morphological changes throughout life can affect identification in elderly individuals. Considering that dermatoglyphics is an important biometric method, due to it being practical and inexpensive, this longitudinal and retrospective study was aimed to evaluate the morphological variations in fingerprints obtained from men and women (n=20) during their adult and elderly stages of life; the time between obtaining the two fingerprints was 33.5±9.4 years. For the morphometric analysis, an area of 1 cm(2) was selected to quantify the visible friction ridges, minutiae, interpapillary and white lines, and later side-by-side confrontation was used to determine the identity of the individuals. Our results showed a reduction of friction ridges, an increase in the number of white lines for the group (men and women) and a decrease in the number of interpapillary lines in the group of women. It also showed that the selection of compatible fingerprints by the automated AFIS/VRP system allowed the identification of 23 individuals (57.5%), but when the identification was made by the automated AFIS/VRP system, followed by the analysis of archived patterns to eliminate incompatible fingerprints, determination of the identity of 28 individuals (70.0%) was possible. The dermatoglyphics of the elderly suffered morphometric changes that prevented the identification of 30% of them, probably due to the aging process, and pointed to the importance of improving the methods of obtaining fingerprints to clarify issues related to the identification of the elderly. PMID:26734989

  14. Including stratigraphic hierarchy information in geostatistical simulation: a demonstration study on analogs of alluvial sediments

    NASA Astrophysics Data System (ADS)

    Comunian, Alessandro; Felletti, Fabrizio; Giacobbo, Francesca; Giudici, Mauro; Bersezio, Riccardo

    2015-04-01

    When building a geostatistical model of the hydrofacies distribution in a volume block it is important to include all the relevant available information. Localised information about the observed hydrofacies (hard data) are routinely included in the simulation procedures. Non stationarities in the hydrofacies distribution can be handled by considering auxiliary (soft) data extracted, for example, from the results of geophysical surveys. This piece of information can be included as auxiliary data both in variogram based methods (i.e. co-Kriging) and in multiple-point statistics (MPS) methods. The latter methods allow to formalise some soft knowledge about the considered model of heterogeneity using a training image. However, including information related to the stratigraphic hierarchy in the training image is rarely straightforward. In this work, a methodology to include the information about the stratigraphic hierarchy in the simulation process is formalised and implemented in a MPS framework. The methodology is applied and tested by reconstructing two model blocks of alluvial sediments with an approximate volume of few cubic meters. The external faces of the blocks, exposed in a quarry, were thoroughly mapped and their stratigraphic hierarchy was interpreted in a previous study. The bi-dimensional (2D) maps extracted from the faces, which are used as training images and as hard data, present a vertical trend and complex stratigraphic architectures. The training images and the conditioning data are classified according to the proposed stratigraphic hierarchy, and the hydrofacies codes are grouped to allow a sequence of interleaved binary MPS simulation. Every step of the simulation sequence corresponds to a group of hydrofacies defined in the stratigraphic hierarchy. The blocks simulated with the proposed methodology are compared with blocks simulated with a standard MPS approach. The comparisons are performed on many realisations using connectivity indicators and

  15. Specification aggregate quarry expansion: a case study demonstrating sustainable management of natural aggregate resources

    USGS Publications Warehouse

    Langer, William H.; Tucker, M.L.

    2003-01-01

    Many countries, provinces, territories, or states in the European Union, Australia, Canada, the United States, and elsewhere have begun implementing sustainability programs, but most of those programs stop short of sustainable management of aggregate resources. Sustainable practices do not always have to be conducted under the title of sustainability. This case study describes how Lafarge, a large multinational construction materials supplier, implemented the principles of sustainability even though there was an absence of existing local government policies or procedures addressing sustainable resource management. Jefferson County, Colorado, USA, is one of three counties in the six-county Denver, Colorado, region that has potentially available sources of crushed stone. Crushed stone comprises 30 percent of the aggregate produced in the area and plays a major role in regional aggregate resource needs. Jefferson County is home to four of the five crushed stone operations in the Denver region. Lafarge operates one of those four quarries. Lafarge recently proposed to expand its reserves by exchanging company-owned land for existing dedicated open space land adjacent to their quarry but owned by Jefferson County. A similar proposal submitted about 10 years earlier had been denied. Contrary to the earlier proposal, which was predicated on public relations, the new proposal was predicated on public trust. Although not explicitly managed under the moniker of sustainability, Lafarge used basic management principles that embody the tenets of sustainability. To achieve the goals of sustainable aggregate management where no governmental policies existed, Lafarge not only assumed their role of being a responsible corporate and environmental member of the community, but also assumed the role of facilitator to encourage and enable other stakeholders to responsibly resolve legitimate concerns regarding the Lafarge quarry proposal. Lafarge successfully presented an enlightened

  16. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Describes two demonstrations for use in chemistry instruction. The first illustrates the preparation of a less common oxide of iron, showing why this oxide is rare. The second is an explosion reaction of hydrogen and oxygen that is recommended for use as an attention-getting device. (TW)

  17. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1981-01-01

    Provides instructions and a list of materials needed to demonstrate: (1) a model of the quantum mechanical atom; (2) principles involved in metal corrosion and in the prevention of this destructive process by electrochemical means; and (3) a Thermit reaction, modified to make it more dramatic and interesting for students. (SK)

  18. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1985-01-01

    Background information, procedures, and typical results obtained are provided for two demonstrations. The first involves the colorful complexes of copper(II). The second involves reverse-phase separation of Food, Drug, and Cosmetic (FD & C) dyes using a solvent gradient. (JN)

  19. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Cliche, Jean-Marie; And Others

    1988-01-01

    Describes two demonstrations: 1) the effect of polarity on solubility using sodium dichromate, TTE, ligroin, and water to form nonpolar-polar-nonpolar layers with the polar layer being colored; 2) determination of egg whites to be yellow by determining the content of yellow colored riboflavin in the egg white. (MVL)

  20. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1987-01-01

    Describes two demonstrations to illustrate characteristics of substances. Outlines a method to detect the changes in pH levels during the electrolysis of water. Uses water pistols, one filled with methane gas and the other filled with water, to illustrate the differences in these two substances. (TW)

  1. Tested Demonstrations

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1976-01-01

    Describes two demonstrations: one that illustrates the attainment of equilibrium in first-order reactions by changing the volumes of two beakers of water at a specified rate, and another that illustrates the role of indicators in showing pH changes in buffer solutions. (MLH)

  2. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1985-01-01

    Describes two demonstrations that require almost no preparation time, are visually stimulating, and present a variety of material for class discussion (with sample questions provided). The first involves a sodium bicarbonate hydrochloric acid volcano; the second involves a dissolving polystyrene cup. Procedures used and information on…

  3. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L.

    1983-01-01

    An apparatus is described in which effects of pressure, volume, and temperature changes on a gas can be observed simultaneously. Includes use of the apparatus in demonstrating Boyle's, Gay-Lussac's, and Charles' Laws, attractive forces, Dalton's Law of Partial pressures, and in illustrating measurable vapor pressures of liquids and some solids.…

  4. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.

    1984-01-01

    Two demonstrations are described. The first shows the effect of polarity on solubility. The second is based on the unexpected formation of a precipitate of barium nitrate when barium carbonate or barium phosphate is treated with dilute nitric acid. List of materials needed and procedures used are included. (JN)

  5. The impact of bismuth addition to sequential treatment on Helicobacter pylori eradication: A pilot study.

    PubMed

    Basyigit, Sebahat; Kefeli, Ayse; Sapmaz, Ferdane; Yeniova, Abdullah Ozgür; Asilturk, Zeliha; Hokkaomeroglu, Murat; Uzman, Metin; Nazligul, Yasar

    2015-10-25

    The success of the current anti-Helicobacter pylori (H. pylori) treatment protocols is reported to decrease by years, and research is needed to strengthen the H. pylori eradication treatment. Sequential treatment (ST), one of the treatment modalities for H. pylori eradication, includes amoxicillin 1 gr b.i.d and proton pump inhibitor b.i.d for first 5 days and then includes clarithromycin 500 mg b.i.d, metronidazole 500 mg b.i.d and a proton pump inhibitor b.i.d for remaining 5 days. In this study, we investigated efficacy and tolerability of bismuth addition in to ST. We included patients that underwent upper gastrointestinal endoscopy in which H. pylori infection was diagnosed by histological examination of antral and corporal gastric mucosa biopsy. Participants were randomly administered ST or bismuth containing ST (BST) protocols for the first-line H. pylori eradication therapy. Participants have been tested by urea breath test for eradication success 6 weeks after the completion of treatment. One hundred and fifty patients (93 female, 57 male) were enrolled. There were no significant differences in eradication rates for both intention to treat population (70.2%, 95% confidence interval [CI]: 66.3-74.1% vs. 71.8%, 95% CI: 61.8-81.7%, for ST and BST, respectively, p>0.05) and per protocol population (74.6%, 95% CI: 63.2-85.8% vs. 73.7%, 95% CI: 63.9-83.5% for ST and BST, respectively, p>0.05). Despite the undeniable effect of bismuth, there may be several possible reasons of unsatisfactory eradication success. Drug administration time, coadministration of other drugs, possible H. pylori resistance to bismuth may affect the eradication success. The addition of bismuth subcitrate to ST regimen does not provide significant increase in eradication rates.

  6. Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Manogharan, Guha; Yelamanchi, Bharat; Aman, Ronald; Mahbooba, Zaynab

    2016-03-01

    Over the years, many studies have been conducted to study and analyze the grain structures of metal alloys during additive manufacturing to improve mechanical properties. In particular, columnar grains are observed predominantly during rapid solidification of molten metal. This leads to lower mechanical properties and requires expensive secondary heat-treatment processes. This study is aimed at disrupting the formation of columnar grain growth during rapid solidification using ultrasonic vibration and analyzes the effects on grain structure and mechanical properties. A gas-metal arc welder mounted on a Rep-Rap-based low-cost metal 3 Dimension printer was used to deposit ER70S-6 mild steel layers on a plate. A contact-type ultrasonic transducer with a control system to vary the frequency and power of the vibration was used. The effects of ultrasonic vibration were determined from the statistical analysis of microstructure and micro-indentation techniques on the deposited layer and heat-affected zone. It was found that both frequency and interaction between frequency and power had significant impact on the refinement of average grain size up to 10.64% and increased the number of grains by approximately 41.78%. Analysis of micro-indentation tests showed that there was an increase of approximately 14.30% in micro-hardness due to the applied frequency during rapid solidification. A pole diagram shows that application of vibration causes randomization of grain orientation. Along with the results from this study, further efforts in modeling and experimentation of multi-directional vibrations would lead to a better understanding of disrupting columnar grains in applications that use mechanical vibrations, such as welding, directed energy deposition, brazing, etc.

  7. Evaluating the addition of positive reinforcement for learning a frightening task: a pilot study with horses.

    PubMed

    Heleski, Camie; Bauson, Laura; Bello, Nora

    2008-01-01

    Horse training often relies upon negative reinforcement (NR). This study tested the hypothesis that adding positive reinforcement (PR) to NR would enhance learning in horses (n = 34) being taught to walk over a tarp (novel/typically frightening task). Subjects were Arabians, and the same person handled all of them. This person handled half "traditionally" (NR only)--that is, halter/lead were pulled; when horse stepped forward, pressure was released; process repeated until criterion met (horse crossed the tarp with little/no obvious anxiety). The same person handled the other half traditionally--but with addition of PR < food + verbal praise > (NR + PR). Subjects "failed" the task if they refused to walk onto the tarp after 10 min. Nine horses failed; 6 of 9 failures were from NR only--no significant difference detected (p = .41). The study detected no difference in time to first crossing of the tarp (p = .30) or total time to achieve calmness criterion (p = .67). Overall, adding PR did not significantly enhance learning this task. However, there were practical implications--adding PR made the task safer/less fatiguing for the handler. PMID:18569217

  8. Evaluating the addition of positive reinforcement for learning a frightening task: a pilot study with horses.

    PubMed

    Heleski, Camie; Bauson, Laura; Bello, Nora

    2008-01-01

    Horse training often relies upon negative reinforcement (NR). This study tested the hypothesis that adding positive reinforcement (PR) to NR would enhance learning in horses (n = 34) being taught to walk over a tarp (novel/typically frightening task). Subjects were Arabians, and the same person handled all of them. This person handled half "traditionally" (NR only)--that is, halter/lead were pulled; when horse stepped forward, pressure was released; process repeated until criterion met (horse crossed the tarp with little/no obvious anxiety). The same person handled the other half traditionally--but with addition of PR < food + verbal praise > (NR + PR). Subjects "failed" the task if they refused to walk onto the tarp after 10 min. Nine horses failed; 6 of 9 failures were from NR only--no significant difference detected (p = .41). The study detected no difference in time to first crossing of the tarp (p = .30) or total time to achieve calmness criterion (p = .67). Overall, adding PR did not significantly enhance learning this task. However, there were practical implications--adding PR made the task safer/less fatiguing for the handler.

  9. Density functional theory study of the effects of alloying additions on sulfur adsorption on nickel surfaces

    NASA Astrophysics Data System (ADS)

    Malyi, Oleksandr I.; Chen, Zhong; Kulish, Vadym V.; Bai, Kewu; Wu, Ping

    2013-01-01

    Reactions of hydrogen sulfide (H2S) with Nickel/Ytrria-doped zirconia (Ni/YDZ) anode materials might cause degradation of the performance of solid oxide fuel cells when S containing fuels are used. In this paper, we employ density functional theory to investigate S adsorption on metal (M)-doped and undoped Ni(0 0 1) and Ni(1 1 1) surfaces. Based on the performed calculations, we analyze the effects of 12 alloying additions (Ag, Au, Al, Bi, Cd, Co, Cu, Fe, Sn, Sb, V, and Zn) on the temperature of transition between clean (S atoms do not adsorb on the surfaces) and contaminated (S atoms can adsorb on the surfaces spontaneously) M-doped Ni surfaces for different concentrations of H2S in the fuel. Predicted results are consistent with many experimental studies relevant to S poisoning of both Ni/YDZ and M-doped Ni/YDZ anode materials. This study is important to understand S poisoning phenomena and to develop new S tolerant anode materials.

  10. Percutaneous Dorsal Instrumentation of Vertebral Burst Fractures: Value of Additional Percutaneous Intravertebral Reposition—Cadaver Study

    PubMed Central

    Krüger, Antonio; Schmuck, Maya; Noriega, David C.; Ruchholtz, Steffen; Baroud, Gamal; Oberkircher, Ludwig

    2015-01-01

    Purpose. The treatment of vertebral burst fractures is still controversial. The aim of the study is to evaluate the purpose of additional percutaneous intravertebral reduction when combined with dorsal instrumentation. Methods. In this biomechanical cadaver study twenty-eight spine segments (T11-L3) were used (male donors, mean age 64.9 ± 6.5 years). Burst fractures of L1 were generated using a standardised protocol. After fracture all spines were allocated to four similar groups and randomised according to surgical techniques (posterior instrumentation; posterior instrumentation + intravertebral reduction device + cement augmentation; posterior instrumentation + intravertebral reduction device without cement; and intravertebral reduction device + cement augmentation). After treatment, 100000 cycles (100–600 N, 3 Hz) were applied using a servohydraulic loading frame. Results. Overall anatomical restoration was better in all groups where the intravertebral reduction device was used (p < 0.05). In particular, it was possible to restore central endplates (p > 0.05). All techniques decreased narrowing of the spinal canal. After loading, clearance could be maintained in all groups fitted with the intravertebral reduction device. Narrowing increased in the group treated with dorsal instrumentation. Conclusions. For height and anatomical restoration, the combination of an intravertebral reduction device with dorsal instrumentation showed significantly better results than sole dorsal instrumentation. PMID:26137481

  11. Using discrepant events in science demonstrations to promote student engagement in scientific investigations: An action research study

    NASA Astrophysics Data System (ADS)

    Mancuso, Vincent J.

    Students' scientific investigations have been identified in national standards and related reform documents as a critical component of students' learning experiences in school, yet it is not easy to implement them in science classrooms. Could science demonstrations help science teachers put this recommendation into practice? While demonstrations are a common practice in the science classroom and research has documented some positive effects in terms of student motivation and engagement from their use, the literature also shows that, as traditionally presented, science demonstrations do not always achieve their intended outcomes. This, in turn, suggested the value of investigating what design elements of demonstrations could be used to promote specific instructional goals. Employing action research as a methodology, the proposed study was developed to explore how science demonstrations can be designed so as to most effectively promote student engagement in scientific investigations. More specifically, I was interested in examining the effects of using a discrepant event as part of the demonstration, as a way to create cognitive conflict and, thus, increase interest and engagement. I also investigated the relative merit of the well-researched POE (Predict, Observe, Explain) design versus employing demonstrations that appear to the student to be unplanned (what I will refer to as NOE, or a Naturally Occurring Experience). This study was informed by Constructivism, Situated Cognition and Conceptual Change as theoretical frameworks. The project included the design, implementation and study of an intervention consisting of three instructional units designed to support students' learning of the concepts of density, molecular arrangement of gas particles, and cohesion, respectively. In each of these units, lasting a total of two 80-minute class periods, students were asked to design and conduct an investigation to gain a better understanding of the concept under study. In

  12. Experimental study of enhanced heat transfer by addition of CuO nanoparticle

    NASA Astrophysics Data System (ADS)

    Jesumathy, Stella; Udayakumar, M.; Suresh, S.

    2012-06-01

    An energy storage system has been designed to study the thermal characteristics of paraffin wax with an embedded nano size copper oxide (CuO) particle. This paper presents studies conducted on phase transition times, heat fraction as well as heat transfer characteristics of paraffin wax as phase change material (PCM) embedded with CuO nanoparticles. 40 nm mean size CuO particles of 2, 5 and 10% by weight were dispersed in PCM for this study. Experiments were performed on a heat exchanger with 1.5-10 l/min of heat transfer fluid (HTF) flow. Time-based variations of the temperature distributions are revealed from the results of observations of melting and solidification curves. The results strongly suggested that the thermal conductivity enhances 6, 6.7 and 7.8% in liquid state and in dynamic viscosity it enhances by 5, 14 and 30% with increasing mass fraction of the CNEPs. The thermal conductivity ratio of the composites can be augmented by a factor up to 1.3. The heat transfer coefficient during solidification increased about 78% for the maximum flow rate. The analysis of experimental results reveals that the addition of copper oxide nanoparticles to the paraffin wax enhances both the conduction and natural convection very effectively in composites and in paraffin wax. The paraffin wax-based composites have great potential for energy storage applications like industrial waste heat recovery, solar thermal applications and solar based dynamic space power generation with optimal fraction of copper oxide nanoparticles.

  13. Increased Risk of Additional Cancers Among Patients with Gastrointestinal Stromal Tumors: A Population-Based Study

    PubMed Central

    Murphy, James D.; Ma, Grace L.; Baumgartner, Joel M.; Madlensky, Lisa; Burgoyne, Adam M.; Tang, Chih-Min; Martinez, Maria Elena; Sicklick, Jason K.

    2015-01-01

    Purpose Most gastrointestinal stromal tumors (GIST) are considered non-hereditary or sporadic. However, single-institution studies suggest that GIST patients develop additional malignancies with increased frequencies. We hypothesized that we could gain greater insight into possible associations between GIST and other malignancies using a national cancer database inquiry. Methods Patients diagnosed with GIST (2001–2011) in the Surveillance, Epidemiology, and End Results database were included. Standardized prevalence ratios (SPRs) and standardized incidence ratios (SIRs) were used to quantify cancer risks incurred by GIST patients before and after GIST diagnoses, respectively, when compared with the general U.S. population. Results Of 6,112 GIST patients, 1,047 (17.1%) had additional cancers. There were significant increases in overall cancer rates: 44% (SPR=1.44) before diagnosis and 66% (SIR=1.66) after GIST diagnoses. Malignancies with significantly increased occurrence both before/after diagnoses included other sarcomas (SPR=5.24/SIR=4.02), neuroendocrine-carcinoid tumors (SPR=3.56/SIR=4.79), non-Hodgkin’s lymphoma (SPR=1.69/SIR=1.76), and colorectal adenocarcinoma (SPR=1.51/SIR=2.16). Esophageal adenocarcinoma (SPR=12.0), bladder adenocarcinoma (SPR=7.51), melanoma (SPR=1.46), and prostate adenocarcinoma (SPR=1.20) were significantly more common only before GIST. Ovarian carcinoma (SIR=8.72), small intestine adenocarcinoma (SIR=5.89), papillary thyroid cancer (SIR=5.16), renal cell carcinoma (SIR=4.46), hepatobiliary adenocarcinomas (SIR=3.10), gastric adenocarcinoma (SIR=2.70), pancreatic adenocarcinoma (SIR=2.03), uterine adenocarcinoma (SIR=1.96), non-small cell lung cancer (SIR=1.74), and transitional cell carcinoma of the bladder (SIR=1.65) were significantly more common only after GIST. Conclusion This is the first population-based study to characterize the associations and temporal relationships between GIST and other cancers, both by site and

  14. Mass analysis addition to the Differential Ion Flux Probe (DIFP) study

    NASA Technical Reports Server (NTRS)

    Wright, K. H., Jr.; Jolley, Richard

    1994-01-01

    The objective of this study is to develop a technique to measure the characteristics of space plasmas under highly disturbed conditions; e.g., non-Maxwellian plasmas with strong drifting populations and plasmas contaminated by spacecraft outgassing. The approach, conducted in conjunction with current MSFC activities, is to extend the capabilities of the Differential Ion Flux Probe (DIFP) to include a high throughput mass measurement that does not require either high voltage or contamination sensitive devices such as channeltron electron multipliers or microchannel plates. This will significantly reduce the complexity and expense of instrument fabrication, testing, and integration of flight hardware compared to classical mass analyzers. The feasibility of the enhanced DIFP has been verified by using breadboard test models in a controlled plasma environment. The ability to manipulate particles through the instrument regardless of incident angle, energy, or ionic component has been amply demonstrated. The energy analysis mode is differential and leads directly to a time-of-flight mass measurement. With the new design, the DIFP will separate multiple ion streams and analyze each stream independently for ion flux intensity, velocity (including direction of motion), mass, and temperature (or energy distribution). In particular, such an instrument will be invaluable on follow-on electrodynamic TSS missions and, possibly, for environmental monitoring on the space station.

  15. 78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... Anti- Salmonella Chemical Food Additives in Feeds; Request for Comments AGENCY: Food and Drug... Chemical Food Additives in Feeds,'' and is seeking comments on this guidance before revisions are made... Guidance for Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in...

  16. Beyond the Call of Duty: A Qualitative Study of Teachers' Additional Responsibilities Related to Sexuality Education

    ERIC Educational Resources Information Center

    Eisenberg, Marla E.; Madsen, Nikki; Oliphant, Jennifer A.; Resnick, Michael

    2011-01-01

    Seven focus groups were conducted with sexuality educators in Minnesota to explore ways that teaching sexuality education differs from teaching other health education content and to determine if additional supports or resources are needed for sexuality educators. Teachers described many specific additional responsibilities or concerns related to…

  17. Addition reaction of alkyl radical to C60 fullerene: Density functional theory study

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto; Kawabata, Hiroshi

    2016-02-01

    Functionalized fullerenes are known as a high-performance molecules. In this study, the alkyl-functionalized fullerenes (denoted by R-C60) have been investigated by means of the density functional theory (DFT) method to elucidate the effects of functionalization on the electronic states of fullerene. Also, the reaction mechanism of alkyl radicals with C60 was investigated. The methyl, ethyl, propyl, and butyl radicals (denoted by n = 1-4, where n means the number of carbon atoms in the alkyl radical) were examined as alkyl radicals. The DFT calculation showed that the alkyl radical binds to the carbon atom of C60 at the on-top site, and a strong C-C single bond is formed. The binding energies of alkyl radicals to C60 were distributed in the range of 31.8-35.1 kcal mol-1 at the CAM-B3LYP/6-311G(d,p) level. It was found that the activation barrier exists before alkyl addition, the barrier heights were calculated to be 2.1-2.8 kcal mol-1. The electronic states of R-C60 complexes were discussed on the basis of the theoretical results.

  18. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol).

    PubMed

    Jones, Matthew; Li, Calvin H; Afjeh, Abdollah; Peterson, Gp

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  19. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    NASA Astrophysics Data System (ADS)

    Jones, Matthew; Li, Calvin H.; Afjeh, Abdollah; Peterson, Gp

    2011-12-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results.

  20. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    PubMed Central

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  1. Meiofaunal and bacterial community response to diesel additions in a microcosm study.

    PubMed

    Lindgren, J Fredrik; Hassellöv, Ida-Maja; Dahllöf, Ingela

    2012-03-01

    Effects of low PAH-containing diesel were studied in a 60-day microcosm experiment at PAH concentrations 130, 1300 and 13,000μg/kg sediment. Nutrient fluxes, potential nitrification and meiofaunal community composition were analysed at three time points. Changed ∑NOx-fluxes indicated reduced sediment nitrification in Medium and High with time, in agreement with lowered potential nitrification rates in all treatments. Reduction in silicate and phosphate fluxes over time suggested severe effects on activity of meiofauna. Reduced activity increased the anoxic sediment layer, which could have contributed to the changed ∑NOx-fluxes. There were significant differences in meiofaunal community composition after 30 and 60days in Medium and High. Changes were due to increasing numbers of harpacticoids and the foraminiferan group Rotaliina, as well as decreasing numbers of Nematodes and the foraminiferan group Reophax. In spite of the low PAH-level, small additions of this diesel can still have pronounced effects on meiofaunal and bacterial communities.

  2. A theoretical study of wave dispersion and thermal conduction for HMX/additive interfaces

    NASA Astrophysics Data System (ADS)

    Long, Yao; Chen, Jun

    2014-04-01

    The wave dispersion rule for non-uniform material is useful for ultrasonic inspection and engine life prediction, and also is key in achieving an understanding of the energy dissipation and thermal conduction properties of solid material. On the basis of linear response theory and molecular dynamics, we derive a set of formulas for calculating the wave dispersion rate of interface systems, and study four kinds of interfaces inside plastic bonded explosives: HMX/{HMX, TATB, F2312, F2313}. (HMX: octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine; TATB: 1,3,5-triamino-2,4,6-trinitrobenzene; F2312, F2313: fluoropolymers). The wave dispersion rate is obtained over a wide frequency range from kHz to PHz. We find that at low frequency, the rate is proportional to the square of the frequency, and at high frequency, the rate couples with the molecular vibration modes at the interface. By using the results, the thermal conductivities of HMX/additive interfaces are derived, and a physical model is built for describing the total thermal conductivity of mixture explosives, including HMX multi-particle systems and {TATB, F2312, F2313}-coated HMX.

  3. The Effect of Interactive Lecture Demonstrations on Students' Understanding of Heat and Temperature: A Study from Thailand

    ERIC Educational Resources Information Center

    Tanahoung, Choksin; Chitaree, Ratchapak; Soankwan, Chernchok; Sharma, Manjula D.; Johnston, Ian D.

    2009-01-01

    The purpose of this study was to investigate the effectiveness of Interactive Lecture Demonstrations over traditional instruction on university students' understanding of heat and temperature. The participants were 327 first year undergraduate students from two science classes in two academic years from the same university in Thailand. One class…

  4. DEMONSTRATION OF FUEL CELLS TO RECOVER ENERGY FROM ANAEROBIC DIGESTER GAS - PHASE I. CONCEPTUAL DESIGN, PRELIMINARY COST, AND EVALUATION STUDY

    EPA Science Inventory

    The report discusses Phase I (a conceptual design, preliminary cost, and evaluation study) of a program to demonstrate the recovery of energy from waste methane produced by anaerobic digestion of waste water treatment sludge. The fuel cell is being used for this application becau...

  5. In situ vitrification demonstration at Pit 1, Oak Ridge National Laboratory. Volume 1: Results of treatability study

    SciTech Connect

    Spalding, B.P.; Naney, M.T.; Cline, S.R.; Bogle, M.A.; Tixier, J.S.

    1997-12-01

    A treatability study was initiated in October 1993 to apply in situ vitrification (ISV) to at least two segments of Oak Ridge National Laboratory (ORNL) seepage Pit 1 by the end of fiscal year (FY) 1995. This treatability study was later extended to include all of Pit 1 and was performed to support a possible Interim Record of Decision or removal action for closure of one or more of the seepage pits and trenches beginning as early as FY 1997. This treatability study was carried out to establish the field-scale technical performance of ISV for (1) attaining the required depth, nominally 15 ft, to incorporate source contamination within and beneath the pits; (2) demonstrating field capability for the overlap of melt settings which will be necessary to achieve fused, melted segments of the source contamination; (3) demonstrating off-gas handling technology for accommodating and minimizing the volatilization of {sup 137}Cs; (4) demonstrating adequate site characterization techniques to predict ISV melting kinetics, processing temperatures, and product durability; and (5) promoting public acceptance of ISV technology by demonstrating its safety, implementability, site impacts, and air emissions and by coordinating the treatability study within the regulatory closure process. In April 1996 an expulsion of an estimated 10% of the 196 Mg (216 tons) melt body occurred resulting in significant damage to ISV equipment and, ultimately, led to an indefinite suspension of further ISV operations at Pit 1. This report summarizes the technical accomplishments and status of the project in fulfilling these objectives through September 1997.

  6. Comparative study of trimethyl phosphite and trimethyl phosphate as electrolyte additives in lithium ion batteries

    NASA Astrophysics Data System (ADS)

    Yao, X. L.; Xie, S.; Chen, C. H.; Wang, Q. S.; Sun, J. H.; Li, Y. L.; Lu, S. X.

    Safety concerns of lithium ion batteries have been the key problems in their practical applications. Trimethyl phosphite (TMP(i)) and trimethyl phosphate (TMP(a)) were used as the electrolyte additives to improve the safety and electrochemical performance of lithium cells. Gallvanostatic cell cycling, flammability test and thermal stability measurements by means of accelerated rate calorimeter (ARC) and micro calorimeter were performed. It is found that both TMP(i) and TMP(a) reduce the flammability of the electrolyte. The TMP(i) additive not only enhances the thermal stability of the electrolyte, but also improves its electrochemical performance. The TMP(a) additive can improve the thermal stability of the electrolyte at the expense of some degree of degradation of its electrochemical performance. Therefore, TMP(i) is a better flame retardant additive in the electrolyte compared with TMP(a).

  7. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    PubMed

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. PMID:27211646

  8. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    PubMed

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile.

  9. Study of metal whiskers growth and mitigation technique using additive manufacturing

    NASA Astrophysics Data System (ADS)

    Gullapalli, Vikranth

    For years, the alloy of choice for electroplating electronic components has been tin-lead (Sn-Pb) alloy. However, the legislation established in Europe on July 1, 2006, required significant lead (Pb) content reductions from electronic hardware due to its toxic nature. A popular alternative for coating electronic components is pure tin (Sn). However, pure tin has the tendency to spontaneously grow electrically conductive Sn whisker during storage. Sn whisker is usually a pure single crystal tin with filament or hair-like structures grown directly from the electroplated surfaces. Sn whisker is highly conductive, and can cause short circuits in electronic components, which is a very significant reliability problem. The damages caused by Sn whisker growth are reported in very critical applications such as aircraft, spacecraft, satellites, and military weapons systems. They are also naturally very strong and are believed to grow from compressive stresses developed in the Sn coating during deposition or over time. The new directive, even though environmentally friendly, has placed all lead-free electronic devices at risk because of whisker growth in pure tin. Additionally, interest has occurred about studying the nature of other metal whiskers such as zinc (Zn) whiskers and comparing their behavior to that of Sn whiskers. Zn whiskers can be found in flooring of data centers which can get inside electronic systems during equipment reorganization and movement and can also cause systems failure. Even though the topic of metal whiskers as reliability failure has been around for several decades to date, there is no successful method that can eliminate their growth. This thesis will give further insights towards the nature and behavior of Sn and Zn whiskers growth, and recommend a novel manufacturing technique that has potential to mitigate metal whiskers growth and extend life of many electronic devices.

  10. A study of the electrochemistry of nickel hydroxide electrodes with various additives

    NASA Astrophysics Data System (ADS)

    Zhu, Wen-Hua; Ke, Jia-Jun; Yu, Hong-Mei; Zhang, Deng-Jun

    Nickel composite electrodes (NCE) with various additives are prepared by a chemical impregnation method from nitrate solutions on sintered porous plaques. The electrochemical properties, such as utilization of active material, swelling and the discharge potential of the nickel oxide electrode (NOE) are determined mainly through the composition of the active material and the characteristics of nickel plaques. Most additives (Mg, Ca, Sr, Ba, Zn, Cd, Co, Li and Al hydroxide) exert effects on the discharge potential and swelling of the NOE. Chemical co-precipitation with the addition of calcium, zinc, magnesium and barium hydroxide increases the discharge potential by more than 20 mV, but that with zinc hydroxide results in an obvious decrease of active-material utilization and that with calcium and magnesium hydroxide produces a larger increase of electrode thickness. The effects of anion additives are also examined. Less than 1% mol of NiS in the active material increases the discharge potential. Cadmium, cobalt and zinc hydroxide are excellent additives for preventing swelling of the NCE. Slow voltammetry (0.2 mV s -1) in 6 M KOH is applied to characterize the oxygen-evolving potential of the NCE. The difference between the oxygen-evolution potential and the potential of the oxidation peak for the NCE with additives of calcium, lithium, barium and aluminium hydroxide is at least + 60 mV.

  11. PFBC Utility Demonstration Project

    SciTech Connect

    Not Available

    1992-11-01

    This report provides a summary of activities by American Electric Power Service Corporation during the first budget period of the PFBC Utility Demonstration Project. In April 1990, AEP signed a Cooperative Agreement with the US Department of Energy to repower the Philip Sporn Plant, Units 3 4 in New Haven, West Virginia, with a 330 KW PFBC plant. The purpose of the program was to demonstrate and verify PFBC in a full-scale commercial plant. The technical and cost baselines of the Cooperative Agreement were based on a preliminary engineering and design and a cost estimate developed by AEP subsequent to AEP's proposal submittal in May 1988, and prior to the signing of the Cooperative Agreement. The Statement of Work in the first budget period of the Cooperative Agreement included a task to develop a preliminary design and cost estimate for erecting a Greenfield plant and to conduct a comparison with the repowering option. The comparative assessment of the options concluded that erecting a Greenfield plant rather than repowering the existing Sporn Plant could be the technically and economically superior alternative. The Greenfield plant would have a capacity of 340 MW. The ten additional MW output is due to the ability to better match the steam cycle to the PFBC system with a new balance of plant design. In addition to this study, the conceptual design of the Sporn Repowering led to several items which warranted optimization studies with the goal to develop a more cost effective design.

  12. Maltreated children's representations of mother and an additional caregiver: a longitudinal study.

    PubMed

    Manashko, Shany; Besser, Avi; Priel, Beatriz

    2009-04-01

    In the current longitudinal investigation, we explored the continuity of and changes in the mental representations of the mother and an additional caregiver among forty-five 9- to 11-year-old children who had been severely maltreated and subsequently placed in long-term residential care as well as the relationships between the content and structure of these representations and teacher's assessments of the child's externalizing and internalizing symptoms. At Time 1, a nonmaltreated comparison group was assessed concomitantly. Compared to nonmaltreated children, maltreated children scored higher for externalizing and internalizing symptoms, and their maternal representations were found to be significantly less benevolent and integrated and more punitive. In addition, among the maltreated children, the additional caregiver representations were found to be more benevolent and integrated, and less punitive, than the maternal representations. After 30 months, the maltreated children's levels of externalizing and internalizing symptoms diminished, their maternal representations become more benevolent and less punitive, and the additional caregiver representations became less benevolent. Moreover, the Benevolence of the additional caregiver representation was found to predict these children's changes in externalizing symptoms beyond the effects of their symptomatology and its associations with the Benevolence of these representations at Time 1. PMID:19220720

  13. Tested Demonstrations.

    ERIC Educational Resources Information Center

    Fenster, Ariel E.; And Others

    1988-01-01

    Identifies a technique using methylene blue and glucose to explain a genetically related enzyme shortage causing blue skin in humans. Offers a laser technique to study solubility of silver salts of chloride and chromate. Encourages the use of models and class participation in the study of chirality and enantiomers. (ML)

  14. GASIS demonstration

    SciTech Connect

    Vidas, E.H.

    1995-04-01

    A prototype of the GASIS database and retrieval software has been developed and is the subject of this poster session and computer demonstration. The prototype consists of test or preliminary versions of the GASIS Reservoir Data System and Source Directory datasets and the software for query and retrieval. The prototype reservoir database covers the Rocky Mountain region and contains the full GASIS data matrix (all GASIS data elements) that will eventually be included on the CD-ROM. It is populated for development purposes primarily by the information included in the Rocky Mountain Gas Atlas. The software has been developed specifically for GASIS using Foxpro for Windows. The application is an executable file that does not require Foxpro to run. The reservoir database software includes query and retrieval, screen display, report generation, and data export functions. Basic queries by state, basin, or field name will be assisted by scrolling selection lists. A detailed query screen will allow record selection on the basis of any data field, such as depth, cumulative production, or geological age. Logical operators can be applied to any-numeric data element or combination of elements. Screen display includes a {open_quotes}browse{close_quotes} display with one record per row and a detailed single record display. Datasets can be exported in standard formats for manipulation with other software packages. The Source Directory software will allow record retrieval by database type or subject area.

  15. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines.

    PubMed

    Gansäuer, Andreas; Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca; Grimme, Stefan

    2013-01-01

    The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol(-1) and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG (‡) and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically.

  16. Effect of stabilizing additives on the structure and hydration of proteins: a study involving monoclinic lysozyme.

    PubMed

    Saraswathi, N T; Sankaranarayanan, R; Vijayan, M

    2002-07-01

    In pursuance of a long-range programme on the hydration, mobility and action of proteins, the structural basis of the stabilizing effect of sugars and polyols is being investigated. With two crystallographically independent molecules with slightly different packing environments in the crystal, monoclinic lysozyme constitutes an ideal system for exploring the problem. The differences in the structure and hydration of the two molecules provide a framework for examining the changes caused by stabilizing additives. Monoclinic crystals were grown under native conditions and also in the presence of 10% sucrose, 15% trehalose, 10% trehalose, 10% sorbitol and 5% glycerol. The crystal structures were refined at resolutions ranging from 1.8 to 2.1 A. The average B values, and hence the mobility of the structure, are lower in the presence of additives than in the native crystals. However, a comparison of the structures indicates that the effect of the additives on the structure and the hydration shell around the protein molecule is considerably less than that caused by differences in packing. It is also less than that caused by the replacement of NaNO(3) by NaCl as the precipitant in the crystallization experiments. This result is not in conformity with the commonly held belief that additives exert their stabilizing effect through the reorganization of the hydration shell, at least as far as the ordered water molecules are concerned.

  17. Studies on the Food Additive Propyl Gallate: Synthesis, Structural Characterization, and Evaluation of the Antioxidant Activity

    ERIC Educational Resources Information Center

    Garrido, Jorge; Garrido, E. Manuela; Borges, Fernanda

    2012-01-01

    Antioxidants are additives largely used in industry for delaying, retarding, or preventing the development of oxidative deterioration. Propyl gallate (E310) is a phenolic antioxidant extensively used in the food, cosmetics, and pharmaceutical industries. A series of lab experiments have been developed to teach students about the importance and…

  18. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines.

    PubMed

    Gansäuer, Andreas; Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca; Grimme, Stefan

    2013-01-01

    The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol(-1) and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG (‡) and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  19. Vector generalized additive models for extreme rainfall data analysis (study case rainfall data in Indramayu)

    NASA Astrophysics Data System (ADS)

    Utami, Eka Putri Nur; Wigena, Aji Hamim; Djuraidah, Anik

    2016-02-01

    Rainfall pattern are good indicators for potential disasters. Global Circulation Model (GCM) contains global scale information that can be used to predict the rainfall data. Statistical downscaling (SD) utilizes the global scale information to make inferences in the local scale. Essentially, SD can be used to predict local scale variables based on global scale variables. SD requires a method to accommodate non linear effects and extreme values. Extreme value Theory (EVT) can be used to analyze the extreme value. One of methods to identify the extreme events is peak over threshold that follows Generalized Pareto Distribution (GPD). The vector generalized additive model (VGAM) is an extension of the generalized additive model. It is able to accommodate linear or nonlinear effects by involving more than one additive predictors. The advantage of VGAM is to handle multi response models. The key idea of VGAM are iteratively reweighted least square for maximum likelihood estimation, penalized smoothing, fisher scoring and additive models. This works aims to analyze extreme rainfall data in Indramayu using VGAM. The results show that the VGAM with GPD is able to predict extreme rainfall data accurately. The prediction in February is very close to the actual value at quantile 75.

  20. Teaching Young Children Decomposition Strategies to Solve Addition Problems: An Experimental Study

    ERIC Educational Resources Information Center

    Cheng, Zi-Juan

    2012-01-01

    The ability to count has traditionally been considered an important milestone in children's development of number sense. However, using counting (e.g., counting on, counting all) strategies to solve addition problems is not the best way for children to achieve their full mathematical potential and to prepare them to develop more complex and…

  1. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

    PubMed Central

    Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca

    2013-01-01

    Summary The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol−1 and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG ‡ and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  2. Evidence of Rapidly Warming Rivers in the UK from an Extensive Additive Modelling Study at the National Scale Using R

    NASA Astrophysics Data System (ADS)

    Simpson, G. L.

    2011-12-01

    River water temperature data exhibit non-linear behaviour over the past 50 or so years. Standard techniques for identifying and quantifying trends have centred around the use of linear regression and Mann-Kendall and Thiel-Sen procedures. Observational data from UK rivers suggest that temperatures are far more variable then assumed under these statistical models. In a national-scale assessment of the response of riverine systems to global climatic change, an additive model framework was employed to model patterns in water temperatures from a large database of temporal observational data. Models were developed using R, which allowed for the deployment of cutting-edge additive modelling techniques to describe trends at 2773 sites across England and Wales, UK. At a subset of sites, additive models were used to model long-term trends, trends within seasons and the long-term variation in the seasonal pattern of water temperatures. Changes in water temperature have important consequences for aquatic ecology, with some species being particularly sensitive even to small shifts in temperature during some or all of their lifecycle. While there are many studies reporting increasing regional and global air temperatures, evidence for changes in river water temperature has thus far been site specific and/or from sites heavily influenced by human activities that could themselves lead to warming. Here I present selected results from a national-scale assessment of changing river water temperatures, covering the whole of England and Wales, comprising data from 2,773 locations. Positive trends in water temperature were observed at 86% of sites. At a subset of sites, seasonal trend models were developed, which showed that 90% of locations demonstrated statistically significant increases in water temperature during Autumn and Winter periods. Multivariate smoothers, that allow for within-year and longer-term trend interactions in time, suggest that periods of warmer waters now extend

  3. Analysis of farmland fragmentation in China Modernization Demonstration Zone since "Reform and Openness": a case study of South Jiangsu Province.

    PubMed

    Cheng, Liang; Xia, Nan; Jiang, Penghui; Zhong, Lishan; Pian, Yuzhe; Duan, Yuewei; Huang, Qiuhao; Li, Manchun

    2015-01-01

    Farmland is a fundamental resource for human survival and development. However, farmland fragmentation has become a serious problem, causing ecological damage and low crop production efficiency in many parts of the world. Based on remote sensing and socioeconomic data, we used landscape pattern indices, Morphological Spatial Pattern Analysis (MSPA), and Markov chain models to analyze the temporal and spatial pattern changes in farmland in South Jiangsu Province (the first "Modernization Demonstration Zone" in China) during 1985-2010. Our results demonstrated that the total farmland area decreased by ca. 24% and the farmland pattern became fragmented during 1985-2008: core farmland decreased and islet farmland increased. Additionally, the farmland patch density (PD) increased and three other landscape indices (NLSI, MESH, and COHESION) showed significant decreases. Although the fragmentation rate slowed after 2008, the convergence rate to a stationary farmland distribution became faster, and transitions tended to be less deterministic after 2000. Economic and population growth and policy changes positively contributed to this phenomenon. Therefore, the primary task of farmland protection should be to preserve contiguous farmlands and reduce scattered patches in order to promote farmland connectivity.

  4. A laboratory study of the perceived benefit of additional noise attenuation by houses

    NASA Technical Reports Server (NTRS)

    Flindell, I. H.

    1983-01-01

    Two Experiments were conducted to investigate the perceived benefit of additional house attenuation against aircraft flyover noise. First, subjects made annoyance judgments in a simulated living room while an operative window with real and dummy storm windows was manipulated in full view of those subjects. Second, subjects made annoyance judgments in an anechoic audiometric test chamber of frequency shaped noise signals having spectra closely matched to those of the aircraft flyover noises reproduced in the first experiment. These stimuli represented the aircraft flyover noises in levels and spectra but without the situational and visual cues present in the simulated living room. Perceptual constancy theory implies that annoyance tends to remain constant despite reductions in noise level caused by additional attenuation of which the subjects are fully aware. This theory was supported when account was taken for a reported annoyance overestimation for certain spectra and for a simulated condition cue overreaction.

  5. A laboratory study of the perceived benefit of additional noise attenuation by houses

    NASA Astrophysics Data System (ADS)

    Flindell, I. H.

    1983-06-01

    Two Experiments were conducted to investigate the perceived benefit of additional house attenuation against aircraft flyover noise. First, subjects made annoyance judgments in a simulated living room while an operative window with real and dummy storm windows was manipulated in full view of those subjects. Second, subjects made annoyance judgments in an anechoic audiometric test chamber of frequency shaped noise signals having spectra closely matched to those of the aircraft flyover noises reproduced in the first experiment. These stimuli represented the aircraft flyover noises in levels and spectra but without the situational and visual cues present in the simulated living room. Perceptual constancy theory implies that annoyance tends to remain constant despite reductions in noise level caused by additional attenuation of which the subjects are fully aware. This theory was supported when account was taken for a reported annoyance overestimation for certain spectra and for a simulated condition cue overreaction.

  6. Thiopeptin, a New Feed-Additive Antibiotic: Biological Studies and Field Trials

    PubMed Central

    Mine, K.; Miyairi, N.; Takano, N.; Mori, S.; Watanabe, N.

    1972-01-01

    Thiopeptin is a new antibiotic, produced by Streptomyces tateyamensis and developed solely for animal use as a feed additive. The antibiotic content in animal tissue and feed was assayed in terms of the antimicrobial activity against Mycoplasma laidlawii A. This antibiotic was found to be relatively nontoxic in rats and mice. In chickens, this antibiotic is excreted into feces within 48 hr of administration and is not absorbed in tissue. It is well tolerated in both broilers and swine and is highly stable in animal feed. Thiopeptin-supplemented feed contributes to the improvement of weight gain, feed efficiency in chickens and swine, and the egg performance in layers. Thus, thiopeptin, when used as a feed additive, is quite suitable for supplementing animal nutrition. PMID:4680812

  7. Structural changes in gluten protein structure after addition of emulsifier. A Raman spectroscopy study

    NASA Astrophysics Data System (ADS)

    Ferrer, Evelina G.; Gómez, Analía V.; Añón, María C.; Puppo, María C.

    2011-06-01

    Food protein product, gluten protein, was chemically modified by varying levels of sodium stearoyl lactylate (SSL); and the extent of modifications (secondary and tertiary structures) of this protein was analyzed by using Raman spectroscopy. Analysis of the Amide I band showed an increase in its intensity mainly after the addition of the 0.25% of SSL to wheat flour to produced modified gluten protein, pointing the formation of a more ordered structure. Side chain vibrations also confirmed the observed changes.

  8. Magnetic Force Microscopy Study of Zr2Co11 -Based Nanocrystalline Materials: Effect of Mo Addition

    DOE PAGES

    Yue, Lanping; Jin, Yunlong; Zhang, Wenyong; Sellmyer, David J.

    2015-01-01

    Tmore » he addition of Molybdenum was used to modify the nanostructure and enhance coercivity of rare-earth-free Zr2Co11-based nanocrystalline permanent magnets. he effect of Mo addition on magnetic domain structures of melt spun nanocrystalline Zr16Co84-xMox(x=0, 0.5, 1, 1.5, and 2.0) ribbons has been investigated. It was found that magnetic properties and local domain structures are strongly influenced by Mo doping. he coercivity of the samples increases with the increase in Mo content (x≤1.5). he maximum energy product(BH)maxincreases with increasingxfrom 0.5 MGOe forx=0to a maximum value of 4.2 MGOe forx=1.5. he smallest domain size with a relatively short magnetic correlation length of 128 nm and largest root-mean-square phase shiftΦrmsvalue of 0.66° are observed for thex=1.5. he optimal Mo addition promotes magnetic domain structure refinement and thus leads to a significant increase in coercivity and energy product in this sample.« less

  9. Load bearing and stiffness tailored NiTi implants produced by additive manufacturing: a simulation study

    NASA Astrophysics Data System (ADS)

    Rahmanian, Rasool; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael; Elahinia, Mohammad

    2014-03-01

    Common metals for stable long-term implants (e.g. stainless steel, Titanium and Titanium alloys) are much stiffer than spongy cancellous and even stiffer than cortical bone. When bone and implant are loaded this stiffness mismatch results in stress shielding and as a consequence, degradation of surrounding bony structure can lead to disassociation of the implant. Due to its lower stiffness and high reversible deformability, which is associated with the superelastic behavior, NiTi is an attractive biomaterial for load bearing implants. However, the stiffness of austenitic Nitinol is closer to that of bone but still too high. Additive manufacturing provides, in addition to the fabrication of patient specific implants, the ability to solve the stiffness mismatch by adding engineered porosity to the implant. This in turn allows for the design of different stiffness profiles in one implant tailored to the physiological load conditions. This work covers a fundamental approach to bring this vision to reality. At first modeling of the mechanical behavior of different scaffold designs are presented as a proof of concept of stiffness tailoring. Based on these results different Nitinol scaffolds can be produced by additive manufacturing.

  10. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response.

  11. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response. PMID:26615870

  12. Meta-Analysis Identifies Gene-by-Environment Interactions as Demonstrated in a Study of 4,965 Mice

    PubMed Central

    Joo, Jong Wha J.; Shih, Diana; Davis, Richard C.; Lusis, Aldons J.; Eskin, Eleazar

    2014-01-01

    Identifying environmentally-specific genetic effects is a key challenge in understanding the structure of complex traits. Model organisms play a crucial role in the identification of such gene-by-environment interactions, as a result of the unique ability to observe genetically similar individuals across multiple distinct environments. Many model organism studies examine the same traits but under varying environmental conditions. For example, knock-out or diet-controlled studies are often used to examine cholesterol in mice. These studies, when examined in aggregate, provide an opportunity to identify genomic loci exhibiting environmentally-dependent effects. However, the straightforward application of traditional methodologies to aggregate separate studies suffers from several problems. First, environmental conditions are often variable and do not fit the standard univariate model for interactions. Additionally, applying a multivariate model results in increased degrees of freedom and low statistical power. In this paper, we jointly analyze multiple studies with varying environmental conditions using a meta-analytic approach based on a random effects model to identify loci involved in gene-by-environment interactions. Our approach is motivated by the observation that methods for discovering gene-by-environment interactions are closely related to random effects models for meta-analysis. We show that interactions can be interpreted as heterogeneity and can be detected without utilizing the traditional uni- or multi-variate approaches for discovery of gene-by-environment interactions. We apply our new method to combine 17 mouse studies containing in aggregate 4,965 distinct animals. We identify 26 significant loci involved in High-density lipoprotein (HDL) cholesterol, many of which are consistent with previous findings. Several of these loci show significant evidence of involvement in gene-by-environment interactions. An additional advantage of our meta

  13. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  14. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  15. Strategic Petroleum Reserve (SPR) additional geologic site characterization studies, Bryan Mound Salt Dome, Texas

    SciTech Connect

    Neal, J.T.; Magorian, T.R.; Ahmad, S.

    1994-11-01

    This report revises the original report that was published in 1980. Some of the topics covered in the earlier report were provisional and it is now practicable to reexamine them using new or revised geotechnical data and that obtained from SPR cavern operations, which involves 16 new caverns. Revised structure maps and sections show interpretative differences as compared with the 1980 report and more definition in the dome shape and caprock structural contours, especially a major southeast-northwest trending anomalous zone. The original interpretation was of westward tilt of the dome, this revision shows a tilt to the southeast, consistent with other gravity and seismic data. This interpretation refines the evaluation of additional cavern space, by adding more salt buffer and allowing several more caverns. Additional storage space is constrained on this nearly full dome because of low-lying peripheral wetlands, but 60 MMBBL or more of additional volume could be gained in six or more new caverns. Subsidence values at Bryan Mound are among the lowest in the SPR system, averaging about 11 mm/yr (0.4 in/yr), but measurement and interpretation issues persist, as observed values are about the same as survey measurement accuracy. Periodic flooding is a continuing threat because of the coastal proximity and because peripheral portions of the site are at elevations less than 15 ft. This threat may increase slightly as future subsidence lowers the surface, but the amount is apt to be small. Caprock integrity may be affected by structural features, especially the faulting associated with anomalous zones. Injection wells have not been used extensively at Bryan Mound, but could be a practicable solution to future brine disposal needs. Environmental issues center on the areas of low elevation that are below 15 feet above mean sea level: the coastal proximity and lowland environment combined with the potential for flooding create conditions that require continuing surveillance.

  16. A near-infrared spectroscopic study of young field ultracool dwarfs: additional analysis

    NASA Astrophysics Data System (ADS)

    Allers, K. N.; Liu, M. C.

    We present additional analysis of the classification system presented in \\citet{allers13}. We refer the reader to \\citet{allers13} for a detailed discussion of our near-IR spectral type and gravity classification system. Here, we address questions and comments from participants of the Brown Dwarfs Come of Age meeting. In particular, we examine the effects of binarity and metallicity on our classification system. We also present our classification of Pleiades brown dwarfs using published spectra. Lastly, we determine SpTs and calculate gravity-sensitive indices for the BT-Settl atmospheric models and compare them to observations.

  17. Feasibility study to demonstrate cardiac imaging using fast kVp switching dual-energy computed tomography: phantom study

    NASA Astrophysics Data System (ADS)

    Madhav, Priti; Imai, Yasuhiro; Narayanan, Suresh; Dutta, Sandeep; Chandra, Naveen; Hsieh, Jiang

    2012-03-01

    Dual-energy computed tomography is a novel imaging tool that has the potential to reduce beam hardening artifacts and enhance material separation over conventional imaging techniques. Dual-energy acquisitions can be performed by using a fast kVp technology to switch between acquiring adjacent projections at two distinct x-ray spectra (80 and 140 kVp). These datasets can be used to further compute material density and monochromatic images for better material separation and beam hardening reduction by virtue of the projection domain process. The purpose of this study was to evaluate the feasibility of using dual-energy in cardiac imaging for myocardial perfusion detection and coronary artery lumen visualization. Data was acquired on a heart phantom, which consisted of the chambers and aorta filled with Iodine density solution (500 HU @ 120 kVp), a defect region between the aorta and chamber (40 HU @ 120 kVp), two Iodinefilled vessels (400 HU @ 120 kVp) of different diameters with high attenuation (hydroxyapatite) plaques (HAP), and with a 30-cm water equivalent body ring around the phantom. Prospective ECG-gated single-energy and prospective ECG-gated dual-energy imaging was performed. Results showed that the generated monochromatic images had minimal beam hardening artifacts which improved the accuracy and detection of the myocardial defect region. Material density images were useful in differentiating and quantifying the actual size of the plaque and coronary artery lumen. Overall, this study shows that dual-energy cardiac imaging will be a valuable tool for cardiac applications.

  18. The influence of bioaugmentation and biosurfactant addition on bioremediation efficiency of diesel-oil contaminated soil: feasibility during field studies.

    PubMed

    Szulc, Alicja; Ambrożewicz, Damian; Sydow, Mateusz; Ławniczak, Łukasz; Piotrowska-Cyplik, Agnieszka; Marecik, Roman; Chrzanowski, Łukasz

    2014-01-01

    The study focused on assessing the influence of bioaugmentation and addition of rhamnolipids on diesel oil biodegradation efficiency during field studies. Initial laboratory studies (measurement of emitted CO2 and dehydrogenase activity) were carried out in order to select the consortium for bioaugmentation as well as to evaluate the most appropriate concentration of rhamnolipids. The selected consortium consisted of following bacterial taxa: Aeromonas hydrophila, Alcaligenes xylosoxidans, Gordonia sp., Pseudomonas fluorescens, Pseudomonas putida, Rhodococcus equi, Stenotrophomonas maltophilia, Xanthomonas sp. It was established that the application of rhamnolipids at 150 mg/kg of soil was most appropriate in terms of dehydrogenase activity. Based on the obtained results, four treatment methods were designed and tested during 365 days of field studies: I) natural attenuation; II) addition of rhamnolipids; III) bioaugmentation; IV) bioaugmentation and addition of rhamnolipids. It was observed that bioaugmentation contributed to the highest diesel oil biodegradation efficiency, whereas the addition of rhamnolipids did not notably influence the treatment process.

  19. Kaolinite flocculation induced by smectite addition - a transmission X-ray microscopic study.

    PubMed

    Zbik, Marek S; Song, Yen-Fang; Frost, Ray L

    2010-09-01

    The influence of smectite addition on kaolinite suspensions in water was investigated by transmission X-ray microscopy (TXM) and Scanning Electron Microscopy (SEM). Sedimentation test screening was also conducted. Micrographs were processed by the STatistic IMage Analysing (STIMAN) program and structural parameters were calculated. From the results of the sedimentation tests important influences of small smectite additions to about 3wt.% on kaolinite suspension flocculation has been found. In order to determine the reason for this smectite impact on kaolinite suspension, macroscopic behaviour micro-structural examination using Transmission X-ray Microscope (TXM) and SEM has been undertaken. TXM & SEM micrographs of freeze-dried kaolinite-smectite suspensions with up to 20% smectite showed a high degree of orientation of the fabric made of highly oriented particles and greatest density when 3wt.% of smectite was added to the 10wt.% dense kaolinite suspension. In contrast, suspensions containing pure kaolinite do not show such platelet mutual orientation but homogenous network of randomly oriented kaolinite platelets. This suggests that in kaolinite-smectite suspensions, smectite forms highly oriented basic framework into which kaolinite platelets may bond in face to face preferential contacts strengthening structure and allowing them to show plastic behaviour which is cause of platelets orientation. PMID:20621806

  20. Excitotoxic food additives--relevance of animal studies to human safety.

    PubMed

    Olney, J W

    1984-01-01

    Evidence is reviewed supporting the view that excitotoxic food additives pose a significant hazard to the developing nervous system of young children. The following points are stressed: (1) although blood-brain barriers protect most central neurons from excitotoxins, certain brain regions lack such protection (a characteristic common to all vertebrate species); (2) regardless of species, it requires only a transient increase in blood excitotoxin levels for neurons in unprotected brain regions to be "silently" destroyed; (3) humans may be at particularly high risk for this kind of brain damage, since ingestion of a given amount of excitotoxin causes much higher blood excitotoxin levels in humans than in other species; (4) in addition to the heightened risk on a species basis, risk may be further increased for certain consumer sub-populations due to youth, disease or genetic factors; (5) despite these reasons for maintaining a wide margin of safety in the use of excitotoxins in foods, no safety margin is currently being observed, i.e., a comparative evaluation of animal (extensive) and human (limited) data supports the conclusion that excitotoxins, as used in foods today, may produce blood elevations high enough to cause damage to the nervous system of young children, damage which is not detectable at the time of occurrence but which may give rise to subtle disturbances in neuroendocrine function in adolescence and/or adulthood.

  1. Seasat-A ASVT: Commercial demonstration experiments. Results analysis methodology for the Seasat-A case studies

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The SEASAT-A commercial demonstration program ASVT is described. The program consists of a set of experiments involving the evaluation of a real time data distributions system, the SEASAT-A user data distribution system, that provides the capability for near real time dissemination of ocean conditions and weather data products from the U.S. Navy Fleet Numerical Weather Central to a selected set of commercial and industrial users and case studies, performed by commercial and industrial users, using the data gathered by SEASAT-A during its operational life. The impact of the SEASAT-A data on business operations is evaluated by the commercial and industrial users. The approach followed in the performance of the case studies, and the methodology used in the analysis and integration of the case study results to estimate the actual and potential economic benefits of improved ocean condition and weather forecast data are described.

  2. Structural and Genetic Studies Demonstrate Neurologic Dysfunction in Triosephosphate Isomerase Deficiency Is Associated with Impaired Synaptic Vesicle Dynamics

    PubMed Central

    Roland, Bartholomew P.; Zeccola, Alison M.; Larsen, Samantha B.; Amrich, Christopher G.; Talsma, Aaron D.; Stuchul, Kimberly A.; Heroux, Annie; Levitan, Edwin S.; VanDemark, Andrew P.; Palladino, Michael J.

    2016-01-01

    Triosephosphate isomerase (TPI) deficiency is a poorly understood disease characterized by hemolytic anemia, cardiomyopathy, neurologic dysfunction, and early death. TPI deficiency is one of a group of diseases known as glycolytic enzymopathies, but is unique for its severe patient neuropathology and early mortality. The disease is caused by missense mutations and dysfunction in the glycolytic enzyme, TPI. Previous studies have detailed structural and catalytic changes elicited by disease-associated TPI substitutions, and samples of patient erythrocytes have yielded insight into patient hemolytic anemia; however, the neuropathophysiology of this disease remains a mystery. This study combines structural, biochemical, and genetic approaches to demonstrate that perturbations of the TPI dimer interface are sufficient to elicit TPI deficiency neuropathogenesis. The present study demonstrates that neurologic dysfunction resulting from TPI deficiency is characterized by synaptic vesicle dysfunction, and can be attenuated with catalytically inactive TPI. Collectively, our findings are the first to identify, to our knowledge, a functional synaptic defect in TPI deficiency derived from molecular changes in the TPI dimer interface. PMID:27031109

  3. Structural and Genetic Studies Demonstrate Neurologic Dysfunction in Triosephosphate Isomerase Deficiency Is Associated with Impaired Synaptic Vesicle Dynamics.

    PubMed

    Roland, Bartholomew P; Zeccola, Alison M; Larsen, Samantha B; Amrich, Christopher G; Talsma, Aaron D; Stuchul, Kimberly A; Heroux, Annie; Levitan, Edwin S; VanDemark, Andrew P; Palladino, Michael J

    2016-03-01

    Triosephosphate isomerase (TPI) deficiency is a poorly understood disease characterized by hemolytic anemia, cardiomyopathy, neurologic dysfunction, and early death. TPI deficiency is one of a group of diseases known as glycolytic enzymopathies, but is unique for its severe patient neuropathology and early mortality. The disease is caused by missense mutations and dysfunction in the glycolytic enzyme, TPI. Previous studies have detailed structural and catalytic changes elicited by disease-associated TPI substitutions, and samples of patient erythrocytes have yielded insight into patient hemolytic anemia; however, the neuropathophysiology of this disease remains a mystery. This study combines structural, biochemical, and genetic approaches to demonstrate that perturbations of the TPI dimer interface are sufficient to elicit TPI deficiency neuropathogenesis. The present study demonstrates that neurologic dysfunction resulting from TPI deficiency is characterized by synaptic vesicle dysfunction, and can be attenuated with catalytically inactive TPI. Collectively, our findings are the first to identify, to our knowledge, a functional synaptic defect in TPI deficiency derived from molecular changes in the TPI dimer interface. PMID:27031109

  4. NATO/CCMS pilot study on demonstration of remedial-action technologies for contaminated land and ground water: 1988 activities

    SciTech Connect

    Sanning, D.E.; Smith, M.A.; Bell, R.M.

    1988-01-01

    The paper describes the nature, structure and content of the NATO Committee on the Challenges of Modern Society (CCMS) Pilot Study Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater and the associated CCMS Fellowship program. To date, twelve projects in six countries have been selected for inclusion in the program which will involve periodic expert review during the five years for which the project will run. The paper draws special attention to the work on microbial clean up techniques included in the program, and the outcome of the first international meeting held in Washington, D.C. in 1987.

  5. Additive Manufacturing of a Microbial Fuel Cell--A detailed study.

    PubMed

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m(-3) per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments.

  6. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    PubMed Central

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m−3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments. PMID:26611142

  7. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    NASA Astrophysics Data System (ADS)

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-11-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m-3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments.

  8. Preliminary study of neutron absorption by concrete with boron carbide addition

    NASA Astrophysics Data System (ADS)

    Abdullah, Yusof; Ariffin, Fatin Nabilah Tajul; Hamid, Roszilah; Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ahmad, Sahrim; Mohamed, Abdul Aziz

    2014-02-01

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  9. Sulphur diffusion in β-NiAl and effect of Pt additive: an ab initio study

    NASA Astrophysics Data System (ADS)

    Chen, Kuiying

    2016-02-01

    Diffusivities of detrimental impurity sulfur (S) in stoichiometric and Pt doped β-NiAl were evaluated using density functional theory calculations. The apparent activation energy and the pre-exponential factor of diffusivity via the next nearest neighbour (NNN) and interstitial jumps were evaluated to identify possible preferred diffusion mechanism(s). By calculating the electron localization function (ELF), the bonding characteristics of S with its surrounding atoms were assessed for the diffusion process. By comparison with the experimental results, the S diffusion through the NNN vacancy-mediated mechanism is found to be favoured. Addition of Pt in β-NiAl was found to significantly reduce the S diffusivity, and an associated electronic effect was explored. The elucidation of the above mechanisms may shed light on the development of new Pt-modified doped β-NiAl bond coats that can extend the life of oxidation resistant and thermal barrier coatings.

  10. Preliminary study of neutron absorption by concrete with boron carbide addition

    SciTech Connect

    Abdullah, Yusof Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ariffin, Fatin Nabilah Tajul; Ahmad, Sahrim; Hamid, Roszilah; Mohamed, Abdul Aziz

    2014-02-12

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  11. THERMODYNAMIC STUDY OF THE NICKEL ADDITION IN ZINC HOT-DIP GALVANIZING BATHS

    SciTech Connect

    Pistofidis, N.; Vourlias, G.

    2010-01-21

    A usual practice during zinc hot-dip galvanizing is the addition of nickel in the liquid zinc which is used to inhibit the Sandelin effect. Its action is due to the fact that the zeta(zeta) phase of the Fe-Zn system is replaced by the TAU(tau) phase of the Fe-Zn-Ni system. In the present work an attempt is made to explain the formation of the TAU phase with thermodynamics. For this reason the Gibbs free energy changes for TAU and zeta phases were calculated. The excess free energy for the system was calculated with the Redlich-Kister polyonyme. From this calculation it was deduced that the Gibbs energy change for the tau phase is negative. As a result its formation is spontaneous.

  12. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    ERIC Educational Resources Information Center

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  13. A systematic study of well-known electrolyte additives in LiCoO2/graphite pouch cells

    NASA Astrophysics Data System (ADS)

    Wang, David Yaohui; Sinha, N. N.; Petibon, R.; Burns, J. C.; Dahn, J. R.

    2014-04-01

    The effectiveness of well-known electrolyte additives singly or in combination on LiCoO2/graphite pouch cells has been systematically investigated and compared using the ultra high precision charger (UHPC) at Dalhousie University and electrochemical impedance spectroscopy (EIS). UHPC studies are believed to identify the best electrolyte additives singly or in combination within a short time period (several weeks). Three parameters: 1) the coulombic efficiency (CE); 2) the charge endpoint capacity slippage (slippage) and 3) the charge transfer resistance (Rct), of LiCoO2/graphite pouch cells with different electrolyte additives singly or in combination were measured and the results for over 55 additive sets are compared. The experimental results suggest that a combination of electrolyte additives can be more effective than a single electrolyte additive. However, of all the additive sets tested, simply using 2 wt.% vinylene carbonate yielded cells very competitive in CE, slippage and Rct. It is hoped that this comprehensive report can be used as a guide and reference for the study of other electrolyte additives singly or in combination.

  14. Appropriate small dam management for minimizing catchment-wide safety threats: International benchmarked guidelines and demonstrative cases studies

    NASA Astrophysics Data System (ADS)

    Pisaniello, John D.; Tingey-Holyoak, Joanne; Burritt, Roger L.

    2012-01-01

    Small dam safety is generally being ignored. The potential for dam failure resulting in catastrophic consequences for downstream communities, property, and the environment, warrants exploration of the threats and policy issues associated with the management of small/farm dams. The paper achieves this through a comparative analysis of differing levels of dam safety assurance policy: absent, driven, strong, and model. A strategic review is undertaken to establish international dam safety policy benchmarks and to identify a best practice model. A cost-effective engineering/accounting tool is presented to assist the policy selection process and complement the best practice model. The paper then demonstrates the significance of the small-dam safety problem with a case study of four Australian States,policy-absent South Australia, policy-driven Victoria, policy-strong New South Wales, and policy-modelTasmania. Surveys of farmer behavior practices provide empirical evidence of the importance of policy and its proper implementation. Both individual and cumulative farm dam failure threats are addressed and, with supporting empirical evidence, the need for "appropriate" supervision of small dams is demonstrated. The paper adds to the existing international dam policy literature by identifying acceptable minimum level practice in private/farm dam safety assurance policy as well as updated international best practice policy guidelines while providing case study demonstration of how to apply the guidelines and empirical reinforcement of the need for "appropriate" policy. The policy guidelines, cost-effective technology, and comparative lessons presented can assist any jurisdiction to determine and implement appropriate dam safety policy.

  15. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  16. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  17. FVB/NJ mice demonstrate a youthful sensitivity to noise-induced hearing loss and provide a useful genetic model for the study of neural hearing loss.

    PubMed

    Ho, Maria K; Li, Xin; Wang, Juemei; Ohmen, Jeffrey D; Friedman, Rick A

    2014-01-01

    The hybrid mouse diversity panel (HMDP), a panel of 100 strains, has been employed in genome wide association studies (GWAS) to study complex traits in mice. Hearing is a complex trait and the CBA/CaJ mouse strain is a widely used model for age-related hearing loss (ARHI) and noise induced hearing loss (NIHL). The CBA/CaJ strain's youthful sensitivity to noise and limited age-related loss led us to attempt to identify additional strains segregating a similar phenotype for our panel. FVB/NJ is part of the HMDP and has been previously described as having a similar ARHI phenotype to CBA/CaJ. For these reasons, we have studied the FVB/NJ mouse for ARHI and NIHL phenotypes in hopes of incorporating its phenotype into HMDP studies. We demonstrate that FVB/NJ exhibits ARHI at an earlier age than CBA/CaJ and young FVB/NJ mice are vulnerable to NIHL up until 10 to 12 weeks. This suggests that FVB/NJ may be used as an additional genetic model for neural forms of progressive hearing loss and for the study of youthful sensitivity to noise.

  18. FVB/NJ mice demonstrate a youthful sensitivity to noise-induced hearing loss and provide a useful genetic model for the study of neural hearing loss

    PubMed Central

    Ho, Maria K.; Li, Xin; Wang, Juemei; Ohmen, Jeffrey D.; Friedman, Rick A.

    2014-01-01

    The hybrid mouse diversity panel (HMDP), a panel of 100 strains, has been employed in genome wide association studies (GWAS) to study complex traits in mice. Hearing is a complex trait and the CBA/CaJ mouse strain is a widely used model for age-related hearing loss (ARHI) and noise induced hearing loss (NIHL). The CBA/CaJ strain's youthful sensitivity to noise and limited age-related loss led us to attempt to identify additional strains segregating a similar phenotype for our panel. FVB/NJ is part of the HMDP and has been previously described as having a similar ARHI phenotype to CBA/CaJ. For these reasons, we have studied the FVB/NJ mouse for ARHI and NIHL phenotypes in hopes of incorporating its phenotype into HMDP studies. We demonstrate that FVB/NJ exhibits ARHI at an earlier age than CBA/CaJ and young FVB/NJ mice are vulnerable to NIHL up until 10 to 12 weeks. This suggests that FVB/NJ may be used as an additional genetic model for neural forms of progressive hearing loss and for the study of youthful sensitivity to noise. PMID:24707282

  19. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy.

  20. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy. PMID:27424134

  1. Additional studies of forest classification accuracy as influenced by multispectral scanner spatial resolution

    NASA Technical Reports Server (NTRS)

    Sadowski, F. E.; Sarno, J. E.

    1976-01-01

    First, an analysis of forest feature signatures was used to help explain the large variation in classification accuracy that can occur among individual forest features for any one case of spatial resolution and the inconsistent changes in classification accuracy that were demonstrated among features as spatial resolution was degraded. Second, the classification rejection threshold was varied in an effort to reduce the large proportion of unclassified resolution elements that previously appeared in the processing of coarse resolution data when a constant rejection threshold was used for all cases of spatial resolution. For the signature analysis, two-channel ellipse plots showing the feature signature distributions for several cases of spatial resolution indicated that the capability of signatures to correctly identify their respective features is dependent on the amount of statistical overlap among signatures. Reductions in signature variance that occur in data of degraded spatial resolution may not necessarily decrease the amount of statistical overlap among signatures having large variance and small mean separations. Features classified by such signatures may thus continue to have similar amounts of misclassified elements in coarser resolution data, and thus, not necessarily improve in classification accuracy.

  2. Demonstration of Feasibility of X-Ray Free Electron Laser Studies of Dynamics of Nanoparticles in Entangled Polymer Melts

    PubMed Central

    Carnis, Jerome; Cha, Wonsuk; Wingert, James; Kang, Jinback; Jiang, Zhang; Song, Sanghoon; Sikorski, Marcin; Robert, Aymeric; Gutt, Christian; Chen, San-Wen; Dai, Yeling; Ma, Yicong; Guo, Hongyu; Lurio, Laurence B.; Shpyrko, Oleg; Narayanan, Suresh; Cui, Mengmeng; Kosif, Irem; Emrick, Todd; Russell, Thomas P.; Lee, Hae Cheol; Yu, Chung-Jong; Grübel, Gerhard; Sinha, Sunil K.; Kim, Hyunjung

    2014-01-01

    The recent advent of hard x-ray free electron lasers (XFELs) opens new areas of science due to their exceptional brightness, coherence, and time structure. In principle, such sources enable studies of dynamics of condensed matter systems over times ranging from femtoseconds to seconds. However, the studies of “slow” dynamics in polymeric materials still remain in question due to the characteristics of the XFEL beam and concerns about sample damage. Here we demonstrate the feasibility of measuring the relaxation dynamics of gold nanoparticles suspended in polymer melts using X-ray photon correlation spectroscopy (XPCS), while also monitoring eventual X-ray induced damage. In spite of inherently large pulse-to-pulse intensity and position variations of the XFEL beam, measurements can be realized at slow time scales. The X-ray induced damage and heating are less than initially expected for soft matter materials. PMID:25109363

  3. Te Rita Papesch: Case Study of an Exemplary Learner of Maori as an Additional Language

    ERIC Educational Resources Information Center

    Ratima, Matiu Tai; Papesch, Te Rita

    2014-01-01

    This paper presents a case study of the life experiences of one exemplar adult second language Maori learner--Te Rita Papesch. Te Rita was one of 17 participants who were interviewed as a part of the first author's PhD study which sought to answer the question: what factors lead to the development of proficiency in te reo Maori amongst adult…

  4. Study on additional carrier sensing for IEEE 802.15.4 wireless sensor networks.

    PubMed

    Lee, Bih-Hwang; Lai, Ruei-Lung; Wu, Huai-Kuei; Wong, Chi-Ming

    2010-01-01

    Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs). The slotted carrier sense multiple access with collision avoidance (CSMA/CA) is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA) detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS) algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC) delay and power consumption of CCA detection.

  5. Chromosome studies in the aquatic monocots of Myanmar: A brief review with additional records.

    PubMed

    Ito, Yu; Tanaka, Nobuyuki

    2014-01-01

    Myanmar (Burma) constitutes a significant component of the Indo-Myanmar biodiversity hotspot, with elements of the Indian, the Indochina, and the Sino-Japanese floristic regions, yet thus far only a few reliable sources of the country's flora have been available. As a part of a contribution for the floristic inventory of Myanmar, since it is important in a floristic survey to obtain as much information as possible, in addition to previous two reports, here we present three more chromosome counts in the aquatic monocots of Myanmar: Limnocharisflava with 2n = 20, Sagittariatrifolia with 2n = 22 (Alismataceae), and Potamogetondistinctus × Potamogetonnodosus with 2n = 52 (Potamogetonaceae); the third one is new to science. A brief review of cytological researches in the floristic regions' 45 non-hybrid aquatic monocots plus well investigated two inter-specific hybrids that are recorded in Myanmar is given, indicating that the further works with a focus on species in Myanmar that has infra-specific chromosome variation in the floristic regions will address the precise evolutionary history of the aquatic flora of Myanmar.

  6. Numerical study of the effect of water addition on gas explosion.

    PubMed

    Liang, Yuntao; Zeng, Wen

    2010-02-15

    Through amending the SENKIN code of CHEMKIN III chemical kinetics package, a computational model of gas explosion in a constant volume bomb was built, and the detailed reaction mechanism (GRI-Mech 3.0) was adopted. The mole fraction profiles of reactants, some selected free radicals and catastrophic gases in the process of gas explosion were analyzed by this model. Furthermore, through the sensitivity analysis of the reaction mechanism of gas explosion, the dominant reactions that affect gas explosion and the formation of catastrophic gases were found out. At the same time, the inhibition mechanisms of water on gas explosion and the formation of catastrophic gases were analyzed. The results show that the induced explosion time is prolonged, and the mole fractions of reactant species such as CH(4), O(2) and catastrophic gases such as CO, CO(2) and NO are decreased as water is added to the mixed gas. With the water fraction in the mixed gas increasing, the sensitivities of the dominant reactions contributing to CH(4), CO(2) are decreased and the sensitivity coefficients of CH(4), CO and NO mole fractions are also decreased. The inhibition of gas explosion with water addition can be ascribed to the significant decrease of H, O and OH in the process of gas explosion due to the water presence. PMID:19811873

  7. Generalized linear and generalized additive models in studies of species distributions: Setting the scene

    USGS Publications Warehouse

    Guisan, A.; Edwards, T.C.; Hastie, T.

    2002-01-01

    An important statistical development of the last 30 years has been the advance in regression analysis provided by generalized linear models (GLMs) and generalized additive models (GAMs). Here we introduce a series of papers prepared within the framework of an international workshop entitled: Advances in GLMs/GAMs modeling: from species distribution to environmental management, held in Riederalp, Switzerland, 6-11 August 2001. We first discuss some general uses of statistical models in ecology, as well as provide a short review of several key examples of the use of GLMs and GAMs in ecological modeling efforts. We next present an overview of GLMs and GAMs, and discuss some of their related statistics used for predictor selection, model diagnostics, and evaluation. Included is a discussion of several new approaches applicable to GLMs and GAMs, such as ridge regression, an alternative to stepwise selection of predictors, and methods for the identification of interactions by a combined use of regression trees and several other approaches. We close with an overview of the papers and how we feel they advance our understanding of their application to ecological modeling. ?? 2002 Elsevier Science B.V. All rights reserved.

  8. Exploratory studies of extended storage of apheresis platelets in a platelet additive solution (PAS).

    PubMed

    Slichter, Sherrill J; Corson, Jill; Jones, Mary Kay; Christoffel, Todd; Pellham, Esther; Bailey, S Lawrence; Bolgiano, Doug

    2014-01-01

    To evaluate the poststorage viability of apheresis platelets stored for up to 18 days in 80% platelet additive solution (PAS)/20% plasma, 117 healthy subjects donated platelets using the Haemonetics MCS+, COBE Spectra (Spectra), or Trima Accel (Trima) systems. Control platelets from the same subjects were compared with their stored test PAS platelets by radiolabeling their stored and control platelets with either (51)chromium or (111)indium. Trima platelets met Food and Drug Administration poststorage platelet viability criteria for only 7 days vs almost 13 days for Haemonetics platelets; ie, platelet recoveries after these storage times averaged 44 ± 3% vs 49 ± 3% and survivals were 5.4 ± 0.3 vs 4.6 ± 0.3 days, respectively. The differences in storage duration are likely related to both the collection system and the storage bag. The Spectra and Trima platelets were hyperconcentrated during collection, and PAS was added, whereas the Haemonetics platelets were elutriated with PAS, which may have resulted in less collection injury. When Spectra and Trima platelets were stored in Haemonetics' bags, poststorage viability was significantly improved. Platelet viability is better maintained in vitro than in vivo, allowing substantial increases in platelet storage times. However, implementation will require resolution of potential bacterial overgrowth during storage.

  9. Chromosome studies in the aquatic monocots of Myanmar: A brief review with additional records

    PubMed Central

    2014-01-01

    Abstract Myanmar (Burma) constitutes a significant component of the Indo-Myanmar biodiversity hotspot, with elements of the Indian, the Indochina, and the Sino-Japanese floristic regions, yet thus far only a few reliable sources of the country's flora have been available. As a part of a contribution for the floristic inventory of Myanmar, since it is important in a floristic survey to obtain as much information as possible, in addition to previous two reports, here we present three more chromosome counts in the aquatic monocots of Myanmar: Limnocharis flava with 2n = 20, Sagittaria trifolia with 2n = 22 (Alismataceae), and Potamogeton distinctus × Potamogeton nodosus with 2n = 52 (Potamogetonaceae); the third one is new to science. A brief review of cytological researches in the floristic regions' 45 non-hybrid aquatic monocots plus well investigated two inter-specific hybrids that are recorded in Myanmar is given, indicating that the further works with a focus on species in Myanmar that has infra-specific chromosome variation in the floristic regions will address the precise evolutionary history of the aquatic flora of Myanmar. PMID:24891826

  10. Multi-spectroscopic DNA interaction studies of sunset yellow food additive.

    PubMed

    Kashanian, Soheila; Heidary Zeidali, Sahar; Omidfar, Kobra; Shahabadi, Nahid

    2012-12-01

    The use of food dyes is at least controversial due to their essential role. Synthetic color food additives occupy an important place in the food industry. Moreover many of them have been related to health problems mainly in children that are considered the most vulnerable group. The purpose of this work is to present spectrophotometric methods to analyze the interaction of native calf thymus DNA (CT-DNA) with sunset yellow (SY) at physiological pH. Considerable hyperchromism and no red shift with an intrinsic binding constant of 7 × 10(4 )M(-1) were observed in UV absorption band of SY. Binding constants of DNA with complex were calculated at different temperatures. Slow increase in specific viscosity of DNA, induced circular dichroism spectral changes, and no significant changes in the fluorescence of neutral red-DNA solutions in the presence of SY suggest that this molecule interacts with CT-DNA via groove binding mode. Furthermore, the enthalpy and entropy of the reaction between SY and CT-DNA showed that the reaction is exothermic and enthalpy favored (∆H = -58.19 kJ mol(-1); ΔS = -274.36 kJ mol(-1) ) which are other evidences to indicate that van der Waals interactions and hydrogen bonding are the main running forces in the binding of the mentioned molecule and mode of interaction with DNA.

  11. A study of alternative metal particle structures and mixtures for dental amalgams based on mercury additions.

    PubMed

    Marquez, J A; Murr, L E; Agüero, V

    2000-08-01

    The perception that mercury in dental amalgam is toxic to the human organism has prompted worldwide efforts by the scientific community to develop alternative amalgam-like materials that utilize little or no mercury. In this investigation, an attempt is made to develop a new dental alloy system by adding liquid mercury to silver-coated Ag4Sn intermetallic particles in lesser amounts than are used in conventional amalgam alloys. An effort to precipitate the important eta-prime (Cu6Sn5) phase was made by adding pure Cu and Sn powders to the alloy formulation during trituration. Tytin a popular Ag-Sn-Cu single-composition, spray-atomized conventional dental alloy was used as the control to obtain baseline data for comparisons of microstructures and mechanical properties. Amalgamation of the coated particles with mercury, with or without the addition of Cu and Sn powders, mostly produced specimens with chemically non-coherent microstructures that were relatively weak in compression. These results were due, in part, to mercury's inability to chemically wet the Ag-coated particles and Cu and Sn powders because of naturally occurring surface oxide films. The strongest specimens tested had silver dendritic coatings, resulting in compression strength values up to 40% of the control's. Their higher strength is attributed to mechanical interlocking at the particle/matrix interfaces.

  12. Additional road markings as an indication of speed limits: results of a field experiment and a driving simulator study.

    PubMed

    Daniels, Stijn; Vanrie, Jan; Dreesen, An; Brijs, Tom

    2010-05-01

    Although speed limits are indicated by road signs, road users are not always aware, while driving, of the actual speed limit on a given road segment. The Roads and Traffic Agency developed additional road markings in order to support driver decisions on speed on 70 km/h roads in Flanders-Belgium. In this paper the results are presented of two evaluation studies, both a field study and a simulator study, on the effects of the additional road markings on speed behaviour. The results of the field study showed no substantial effect of the markings on speed behaviour. Neither did the simulator study, with slightly different stimuli. Nevertheless an effect on lateral position was noticed in the simulator study, showing at least some effect of the markings. The role of conspicuity of design elements and expectations towards traffic environments is discussed. Both studies illustrate well some strengths and weaknesses of observational field studies compared to experimental simulator studies.

  13. Evaluation of Herbal Medicines: Value Addition to Traditional Medicines Through Metabolism, Pharmacokinetic and Safety Studies.

    PubMed

    Thelingwani, Roslyn; Masimirembwa, Collen

    2014-01-01

    The safety and efficacy of herbal medicines remain major issues of concern especially in the developing world where the use is high. The World Health Organisation estimates up to 80% of the population in Africa relies on herbal medicines for treatment of many diseases. Minimum safety evaluations need to be done for both the herbal and conventional drugs, in particular when there is a high likelihood of co-administration. This is particularly important in Africa where there is increased access to antiretrovirals in the treatment of HIV/AIDS, which are being used in a population background characterized by rampant use of herbal medicines. Many techniques used in the discovery and evaluation of conventional drugs can be adapted to herbal medicines. Such evaluations will add value to herbal medicines as doctors and patients will be better informed on which drugs and herbal medicines to take or not take together. This can also lead to the adoption of guidelines by regulatory agents such as the European Medicines Agency (EMA), Food and Drug Administration (FDA) and governmental agencies controlling the use of medicines. Of current interest is the evaluation of drug-herb interactions (DHI) involving the absorption, distribution, metabolism and excretion (ADME) of medicines where there is a promising possibility to adopt the current FDA and EMA guidelines on the evaluation of herbal medicines for drug-drug interactions (DDI). In this review we demonstrate progress made so far in DHI and point to possible future developments that will contribute to the safe use of herbal medicines.

  14. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  15. Study on Type C Coal Fly ash as an Additive to Molding Sand for Steel Casting

    NASA Astrophysics Data System (ADS)

    Palaniappan, Jayanthi

    2016-05-01

    Study of physio-chemical properties studies such as granulometric analysis, moisture, X ray fluorescence etc. were performed with Type C coal—combustion fly ash to investigate their potential as a distinct option for molding sand in foundry, thereby reducing the dependency on latter. Technological properties study such as compressive strength, tensile strength, permeability and compaction of various compositions of fly ash molding sand (10, 20 and 30 % fly ash substitute to chemically bonded sand) were performed and compared with silica molding sand. Steel casting production using this fly ash molding sand was done and the casting surface finish and typical casting parameters were assessed. It was noted that a good quality steel casting could be produced using type C fly ash molding sand, which effectively replaced 20 % of traditional molding sand and binders thereby providing greater financial profits to the foundry and an effective way of fly ash utilization (waste management).

  16. Additional Study of Water Droplet Median Volume Diameter (MVD) Effects on Ice Shapes

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching; Anderson, David N.

    2005-01-01

    This paper reports the result of an experimental study in the NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the MVD-independent effect identified previously might apply to SLD conditions in rime icing situations. Models were NACA 0012 wing sections with chords of 53.3 and 91.4 cm. Tests were conducted with a nominal airspeed of 77 m/s (150 kt) and a number of MVD's ranging from 15 to 100 m with LWC of 0.5 to 1 g/cu m. In the present study, ice shapes recorded from past studies and recent results at SLD and Appendix-C conditions are reviewed to show that droplet diameter is not important to rime ice shape for MVD of 30 microns or larger, but for less than 30 m drop sizes a rime ice shape transition from convex to wedge to spearhead type ice shape is observed.

  17. A study of grain boundary sliding in copper with and without an addition of phosphorus

    NASA Astrophysics Data System (ADS)

    Pettersson, Kjell

    2010-10-01

    Copper will be used as a corrosion barrier in the storage of high level nuclear waste. In order to improve the creep fracture properties of the material it will contain 30-50 ppm of phosphorus, OFP copper as opposed to OF copper without P. It has been suggested that the phosphorus impedes grain boundary sliding in copper and recently a quantitative theory based on this idea has shown that there is no risk for creep-brittle fracture of OFP copper under waste storage conditions. In order to verify the basis of this theory grain boundary sliding has been investigated in copper with and without a P addition. The method has been to examine intentionally scratched surfaces of tensile specimens tension tested to plastic strains of 1%, 2% and 4% at 150 and 200 °C. After testing specimen surfaces have been examined in SEM and sliding distances have been measured as in-surface displacement of scratches. The results have been plotted as distribution functions where the fraction of slides smaller than a given value is plotted versus sliding distance. The result is that in most cases the distribution functions for OF and OFP copper overlap. In a small number of cases there is a tendency that less sliding has occurred in OFP copper. The overall conclusion is however that although there may be a slight difference between the materials with regard to grain boundary sliding it is not large enough to explain the observed difference in creep brittleness. Tension tests to fracture in the temperature range 100-200 °C show that the tensile properties of the two copper qualities are more or less identical until intergranular cracking starts in the OF copper. Then the flow stress decreases in comparison with OFP. It is suggested that at least part of the observed differences in creep strength between the two coppers may be due to the effect of intergranular cracking.

  18. SCAPEGOAT WILDERNESS AND ADDITIONS, BOB MARSHALL AND GREAT BEAR WILDERNESSES, AND ADJACENT STUDY AREAS, MONTANA.

    USGS Publications Warehouse

    Earhart, Robert L.; Marks, Lawrence Y.

    1984-01-01

    Hydrocarbon and non-fuels mineral surveys indicate that parts of the Bob Marshall and Great Bear Wildernesses and several of the adjacent study areas have probable and substantiated mineral-resource potential for hydrocarbon accumulations, especially natural gas; the Scapegoat and Great Bear Wildernesses have a substantiated resource potential for copper and silver. The Bob Marshall Wilderness has a substantiated potential for barite and a probable potential for copper and silver. Lead, zinc, coal, and limestone occur locally within the study areas but such occurrences are small and low grade and no resource potential is identified.

  19. Nahuatl as a Classical, Foreign, and Additional Language: A Phenomenological Study

    ERIC Educational Resources Information Center

    De Felice, Dustin

    2012-01-01

    In this study, participants learning an endangered language variety shared their experiences, thoughts, and feelings about the often complex and diverse language-learning process. I used phenomenological interviews in order to learn more about these English or Spanish language speakers' journey with the Nahuatl language. From first encounter to…

  20. CNV-based genome wide association study reveals additional variants contributing to meat quality in swine

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Pork quality is important both to the meat processing industry and consumers’ purchasing attitudes. Copy number variation (CNV) is a burgeoning kind of variant that may influence meat quality. Herein, a genome-wide association study (GWAS) was performed between CNVs and meat quality traits in swine....

  1. Genome-Wide Association Study of Intelligence: Additive Effects of Novel Brain Expressed Genes

    ERIC Educational Resources Information Center

    Loo, Sandra K.; Shtir, Corina; Doyle, Alysa E.; Mick, Eric; McGough, James J.; McCracken, James; Biederman, Joseph; Smalley, Susan L.; Cantor, Rita M.; Faraone, Stephen V.; Nelson, Stanley F.

    2012-01-01

    Objective: The purpose of the present study was to identify common genetic variants that are associated with human intelligence or general cognitive ability. Method: We performed a genome-wide association analysis with a dense set of 1 million single-nucleotide polymorphisms (SNPs) and quantitative intelligence scores within an ancestrally…

  2. A Micro-Developmental Approach to Studying Young Children's Problem Solving Behavior in Addition

    ERIC Educational Resources Information Center

    Voutsina, Chronoula

    2012-01-01

    This paper presents a study that investigated the process of change in 5-6-year-old children's successful problem-solving approaches when tackling a multiple-step task in elementary arithmetic. Micro-developmental changes in children's successful problem-solving behavior were analyzed using Karmiloff-Smith's model of representational redescription…

  3. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  4. Phenome-wide association studies demonstrating pleiotropy of genetic variants within FTO with and without adjustment for body mass index

    PubMed Central

    Cronin, Robert M.; Field, Julie R.; Bradford, Yuki; Shaffer, Christian M.; Carroll, Robert J.; Mosley, Jonathan D.; Bastarache, Lisa; Edwards, Todd L.; Hebbring, Scott J.; Lin, Simon; Hindorff, Lucia A.; Crane, Paul K.; Pendergrass, Sarah A.; Ritchie, Marylyn D.; Crawford, Dana C.; Pathak, Jyotishman; Bielinski, Suzette J.; Carrell, David S.; Crosslin, David R.; Ledbetter, David H.; Carey, David J.; Tromp, Gerard; Williams, Marc S.; Larson, Eric B.; Jarvik, Gail P.; Peissig, Peggy L.; Brilliant, Murray H.; McCarty, Catherine A.; Chute, Christopher G.; Kullo, Iftikhar J.; Bottinger, Erwin; Chisholm, Rex; Smith, Maureen E.; Roden, Dan M.; Denny, Joshua C.

    2014-01-01

    Phenome-wide association studies (PheWAS) have demonstrated utility in validating genetic associations derived from traditional genetic studies as well as identifying novel genetic associations. Here we used an electronic health record (EHR)-based PheWAS to explore pleiotropy of genetic variants in the fat mass and obesity associated gene (FTO), some of which have been previously associated with obesity and type 2 diabetes (T2D). We used a population of 10,487 individuals of European ancestry with genome-wide genotyping from the Electronic Medical Records and Genomics (eMERGE) Network and another population of 13,711 individuals of European ancestry from the BioVU DNA biobank at Vanderbilt genotyped using Illumina HumanExome BeadChip. A meta-analysis of the two study populations replicated the well-described associations between FTO variants and obesity (odds ratio [OR] = 1.25, 95% Confidence Interval = 1.11–1.24, p = 2.10 × 10−9) and FTO variants and T2D (OR = 1.14, 95% CI = 1.08–1.21, p = 2.34 × 10−6). The meta-analysis also demonstrated that FTO variant rs8050136 was significantly associated with sleep apnea (OR = 1.14, 95% CI = 1.07–1.22, p = 3.33 × 10−5); however, the association was attenuated after adjustment for body mass index (BMI). Novel phenotype associations with obesity-associated FTO variants included fibrocystic breast disease (rs9941349, OR = 0.81, 95% CI = 0.74–0.91, p = 5.41 × 10−5) and trends toward associations with non-alcoholic liver disease and gram-positive bacterial infections. FTO variants not associated with obesity demonstrated other potential disease associations including non-inflammatory disorders of the cervix and chronic periodontitis. These results suggest that genetic variants in FTO may have pleiotropic associations, some of which are not mediated by obesity. PMID:25177340

  5. Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

    NASA Astrophysics Data System (ADS)

    Gujarati, Vivek P.; Deshpande, M. P.; Patel, Kamakshi R.; Chaki, S. H.

    2016-05-01

    Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

  6. Studying quantum dot blinking through the addition of an engineered inorganic hole trap.

    PubMed

    Tenne, Ron; Teitelboim, Ayelet; Rukenstein, Pazit; Dyshel, Maria; Mokari, Taleb; Oron, Dan

    2013-06-25

    An all-inorganic compound colloidal quantum dot incorporating a highly emissive CdSe core, which is linked by a CdS tunneling barrier to an engineered charge carrier trap composed of PbS, is designed, and its optical properties are studied in detail at the single-particle level. Study of this structure enables a deeper understanding of the link between photoinduced charging and surface trapping of charge carriers and the phenomenon of quantum dot blinking. In the presence of the hole trap, a "gray" emissive state appears, associated with charging of the core. Rapid switching is observed between the "on" and the "gray" state, although the switching dynamics in and out of the dark "off" state remain unaffected. This result completes the links in the causality chain connecting charge carrier trapping, charging of QDs, and the appearance of a "gray" emission state.

  7. Brief reconnaissance study for the addition of hydropower for Carr Fork Dam, Sassafras, Kentucky

    SciTech Connect

    Gebhard, T.G. Jr.

    1982-05-24

    The feasibility of retrofitting the Carr Fork Dam near Hazard, KY for power generation was examined. This dam has a developable head of 80 ft and was built in 1975 to provide flood protection. The study of environmental, institutional, safety, and economic factors showed that the total investment cost would be $909,600 and that hydroelectric power development at this site is not feasible unless a higher price could be obtained for the power sold. (LCL)

  8. Exploration Technology Development & Demonstration

    NASA Video Gallery

    Chris Moore delivers a presentation from the Exploration Technology Development & Demonstration (ETDD) study team on May 25, 2010, at the NASA Exploration Enterprise Workshop held in Galveston, TX....

  9. In vivo demonstration of ultrasound power delivery to charge implanted medical devices via acute and survival porcine studies.

    PubMed

    Radziemski, Leon; Makin, Inder Raj S

    2016-01-01

    Animal studies are an important step in proving the utility and safety of an ultrasound based implanted battery recharging system. To this end an Ultrasound Electrical Recharging System (USER™) was developed and tested. Experiments in vitro demonstrated power deliveries at the battery of up to 600 mW through 10-15 mm of tissue, 50 mW of power available at tissue depths of up to 50 mm, and the feasibility of using transducers bonded to titanium as used in medical implants. Acute in vivo studies in a porcine model were used to test reliability of power delivery, temperature excursions, and cooling techniques. The culminating five-week survival study involved repeated battery charging, a total of 10.5h of ultrasound exposure of the intervening living tissue, with an average RF input to electrical charging efficiency of 20%. This study was potentially the first long term cumulative living-tissue exposure using transcutaneous ultrasound power transmission to an implanted receiver in situ. Histology of the exposed tissue showed changes attributable primarily due to surgical implantation of the prototype device, and no damage due to the ultrasound exposure. The in vivo results are indicative of the potential safe delivery of ultrasound energy for a defined set of source conditions for charging batteries within implants.

  10. Radiometric studies with gas-liquid and thin-layer chromatography for rapid demonstration of hemin dependence and characterization of Mycobacterium haemophilum

    SciTech Connect

    Damato, J.J.; Collins, M.T.

    1984-09-01

    Eight isolates of Mycobacterium haemophilum were evaluated by radiometric methods to determine whether this test system could support the growth of these organisms as well as demonstrate their growth requirements for iron complexes such as hemin, ferric ammonium citrate, and blood. In addition, gas-liquid and thin-layer chromatography were evaluated to determine whether these procedures could further differentiate M. haemophilum from other mycobacteria. During the initial 24 to 48 h, there was no significant difference between the radiometric test broths containing iron complexes and control broths without iron supplementation. After 48 h, the test growth index readings rapidly increased, and control broth readings leveled off and declined. The mean growth index reading of the test broths after 6 days of incubation was 100 times that of the controls. The mean incubation time with supplemented 7H10 agar was 17 days. The use of radiometric media resulted in the demonstration of hemin dependence by M. haemophilum significantly earlier than with 7H10 agar. Of the three supplements studied, whole blood provided the greatest growth rate, followed by ferric ammonium citrate and hemin. When 12 species of mycobacteria other than M. haemophilum were radiometrically evaluated, no isolate demonstrated an iron complex requirement. Gas-liquid and thin-layer chromatography procedures were able to rapidly differentiate M. haemophilum from the other 12 Mycobacterium species.

  11. A CASE STUDY DEMONSTRATING GUIDANCE FOR EVALUATING LANDFILL GAS EMISSIONS FROM CLOSED OR ABANDONED FACILITIES--SOMERSWORTH, NEW HAMPSHIRE

    EPA Science Inventory

    The purpose of the activities described in this document is to provide a demonstration of the procedures and methodologies described within the "Guidance for Evaluating Landfill Gas Emissions from Closed or Abandoned Facilities" (Guidance). This demonstration provides an example ...

  12. Column studies on transport of deicing additive benzotriazole in a sandy aquifer and a zerovalent iron barrier.

    PubMed

    Jia, Yu; Breedveld, Gijs D; Aagaard, Per

    2007-11-01

    Benzotriazole (BTA), a chemical with wide industrial applications, is a typical additive in deicer/anti-icer used at airport. To achieve a better understanding of the transport behaviour and environmental fate of BTA, laboratory column studies have been performed on subsoil samples from Oslo Airport, Gardermoen. To explore possibilities for aquifer remediation, BTA behaviour was also studied in a column of granular zerovalent iron (Fe(0)). The subsoil column study demonstrates a very limited retardation of BTA. Consecutive loadings of BTA of the subsoil column showed no change of the break-through curve (BTC) and complete desorption was observed. The sorption behaviour of BTA to metallic iron (Fe(0)) was rather complex. Considerable retardation was observed in the Fe(0) column and repeated BTA loading resulted in an earlier break-through. Between 20% and 50% of the input concentration was retained permanently in the iron (Fe(0)) column. The BTA sorption to metallic iron was found to be enhanced by chloride which lowered the break-through concentration (i.e the C/C(0) plateau). The fraction of BTA remaining in the iron column was found to vary with the flow rate, indicating a time dependant multilayer sorption mechanism. The steady increase in the amount of adsorbed BTA to the iron column during loading corresponds to a rather strong bonding of 4-15 BTA layers to the iron surface. A very slow desorption of BTA was observed; even after flushing with 753 pore volumes of BTA free water, 7.5% of the BTA remained in the column. A geochemical model was developed based on PHREEQC-2 to simulate the sorption and transport of BTA in the tested materials. The BTA sorption was modelled with Freundlich sorption isotherms, as earlier determined in batch experiments. A slight adjustment of the Freundlich parameters was required to fit the observed column break-through. However, our model was not able to simulate the long-term retainment of BTA in the granular iron columns. The

  13. Demonstration/field study of new designs of automated gas chromatographs in Connecticut and other locations, 1992. Final report

    SciTech Connect

    Holdren, M.W.; Smith, D.L.; Pollack, A.J.; Pate, A.D.

    1993-02-01

    The objectives of the study were to install, test and demonstrate two automated gas chromatographic (GC) systems to state and regional EPA groups. The Dynatherm/Hewlett Packard GC system was designed for the measurement of the 41 toxic compounds listed in EPA's Compendium of Methods for Method TO-14. The second system was a Perkin Elmer GC configured for the analysis of the 55 ozone precursor compounds identified in the EPA Technical Assistance Document No. EPA/600-8-91/215. Both GC systems performed well during the field evaluations with data capture of 98 percent. A method quantitation limit (MQL) of 0.5 ppbv was obtained for most of the target compounds. In examining daily control check runs, the variation of corrected GC retention times for each instrument and detector ranged from 0.023 to 0.044 minutes.

  14. Kentucky Department for Natural Resources and Environmental Protection permit application for air contaminant source: SRC-I demonstration plant, Newman, Kentucky. Supplement I. [Additional information on 38 items requested by KY/DNREP

    SciTech Connect

    Pearson, Jr., John F.

    1981-02-13

    In response to a letter from KY/DNREP, January 19, 1981, ICRC and DOE have prepared the enclosed supplement to the Kentucky Department for Natural Resources and Environmental Protection Permit Application for Air Contaminant Source for the SRC-I Demonstration Plant. Each of the 38 comments contained in the letter has been addressed in accordance with the discussions held in Frankfort on January 28, 1981, among representatives of KY/DNREP, EPA Region IV, US DOE, and ICRC. The questions raised involve requests for detailed information on the performance and reliability of proprietary equipment, back-up methods, monitoring plans for various pollutants, composition of wastes to flares, emissions estimates from particular operations, origin of baseline information, mathematical models, storage tanks, dusts, etc. (LTN)

  15. [Chewing gum as an additional agent in maintaining oral hygiene versus smoking status--preliminary study].

    PubMed

    Nakonieczna-Rudnicka, Marta; Strycharz-Dudziak, Małgorzata; Bachanek, Teresa

    2012-01-01

    Nowadays chewing gum is widely used in different age groups, so complying with proper duration and frequency of chewing is an important factor influencing the state of masticatory system. The study involved 112 dental students of the Medical University of Lublin. Everyday use of chewing gum declared 47,32% of cases. Chewing time up to 10 minutes was stated in 23,08% of respondents, 11-20 minutes in 40,38% of interviewees. Among the examined students 17,3% smoked cigarettes. In smokers group 83,33% of questioned chewed the gum every day, while among non-smokers - 43,37%. Chewing time shorter than 10 minutes declared 22,22% of smokers and 23,26% of non-smokers, while chewing time between 11-20 minutes - 27,78% i 44,35% of smokers and non-smokers respectively. Obtained results indicate the need of carrying out further studies aimed at the nicotine influence on saliva parameters with respect to development of diseases of hard tooth tissues.

  16. Study on the interaction of the toxic food additive carmoisine with serum albumins: a microcalorimetric investigation.

    PubMed

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-05-30

    The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10(6)M(-1) and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5-8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy-entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine. PMID:24742664

  17. Study on the interaction of the toxic food additive carmoisine with serum albumins: a microcalorimetric investigation.

    PubMed

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-05-30

    The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10(6)M(-1) and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5-8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy-entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine.

  18. Case Study for the ARRA-funded Ground Source Heat Pump Demonstration at Denver Museum of Nature & Science

    SciTech Connect

    Im, Piljae; Liu, Xiaobing

    2015-11-30

    High initial costs and lack of public awareness of ground-source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy-saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects were competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This report highlights the findings of a case study of one such GSHP demonstration projects that uses a recycled water heat pump (RWHP) system installed at the Denver Museum of Nature & Science in Denver, Colorado. The RWHP system uses recycled water from the city’s water system as the heat sink and source for a modular water-to-water heat pump (WWHP). This case study was conducted based on the available measured performance data from December 2014 through August 2015, utility bills of the building in 2014 and 2015, construction drawings, maintenance records, personal communications, and construction costs. The annual energy consumption of the RWHP system was calculated based on the available measured data and other related information. It was compared with the performance of a baseline scenario— a conventional VAV system using a water-cooled chiller and a natural gas fired boiler, both of which have the minimum energy efficiencies allowed by ASHRAE 90.1-2010. The comparison was made to determine energy savings, operating cost savings, and CO2 emission reductions achieved by the RWHP system. A cost analysis was performed to evaluate the simple payback of the RWHP system. Summarized below are the results of the performance analysis, the learned lessons, and recommended improvement in the operation of the RWHP system.

  19. Shelf Life and Quality Study of Minced Tilapia with Nori and Hijiki Seaweeds as Natural Additives

    PubMed Central

    Ribeiro, Ingridy Simone; Shirahigue, Ligianne Din; Ferraz de Arruda Sucasas, Lia; Anbe, Lika; da Cruz, Pedro Gomes; Gallo, Cláudio Rosa; Carpes, Solange Teresinha; Marques, Marcos José; Oetterer, Marília

    2014-01-01

    The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage. PMID:25478593

  20. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-08-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of a similar magnitude, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity-dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  1. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-12-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters, and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied with experimental methods. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of similar magnitudes, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  2. l-carnitine as a Potential Additive in Blood Storage Solutions: A Study on Erythrocytes.

    PubMed

    Soumya, R; Carl, H; Vani, R

    2016-09-01

    Erythrocytes undergo various changes during storage (storage lesion) that in turn reduces their functioning and survival. Oxidative stress plays a major role in the storage lesion and antioxidants can be used to combat this stress. This study elucidates the effects of l-carnitine (LC) on erythrocytes of stored blood. Blood was obtained from male Wistar rats and stored (4 °C) for 20 days in CPDA-1 (citrate phosphate dextrose adenine) solution. Samples were divided into-(i) controls (ii) LC 10 (l-carnitine at a concentration of 10 mM) (iii) LC 30 (l-carnitine at a concentration of 30 mM) and (iv) LC 60 (l-carnitine at a concentration of 60 mM). Every fifth day, the biomarkers (haemoglobin, hemolysis, antioxidant enzymes, lipid peroxidation and protein oxidation products) were analysed in erythrocytes. Hemoglobin and protein sulfhydryls were insignificant during storage indicative of the maintenance of hemoglobin and sulfhydryls in all groups. Superoxide dismutase and malondialdehyde levels increased initially and decreased towards the end of storage. The levels of catalase and glutathione peroxidase were lower in experimentals than controls during storage. l-carnitine assisted the enzymes by scavenging the reactive oxygen species produced. Hemolysis increased in all groups with storage, elucidating that l-carnitine could not completely protect lipids and proteins from oxidative stress. Hence, this study opens up new avenues of using l-carnitine as a component of storage solutions with combinations of antioxidants in order to maintain efficacy of erythrocytes.

  3. Biological effect of food additive titanium dioxide nanoparticles on intestine: an in vitro study.

    PubMed

    Song, Zheng-Mei; Chen, Ni; Liu, Jia-Hui; Tang, Huan; Deng, Xiaoyong; Xi, Wen-Song; Han, Kai; Cao, Aoneng; Liu, Yuanfang; Wang, Haifang

    2015-10-01

    Titanium dioxide nanoparticles (TiO2 NPs) are widely found in food-related consumer products. Understanding the effect of TiO2 NPs on the intestinal barrier and absorption is essential and vital for the safety assessment of orally administrated TiO2 NPs. In this study, the cytotoxicity and translocation of two native TiO2 NPs, and these two TiO2 NPs pretreated with the digestion simulation fluid or bovine serum albumin were investigated in undifferentiated Caco-2 cells, differentiated Caco-2 cells and Caco-2 monolayer. TiO2 NPs with a concentration less than 200 µg ml(-1) did not induce any toxicity in differentiated cells and Caco-2 monolayer after 24 h exposure. However, TiO2 NPs pretreated with digestion simulation fluids at 200 µg ml(-1) inhibited the growth of undifferentiated Caco-2 cells. Undifferentiated Caco-2 cells swallowed native TiO2 NPs easily, but not pretreated NPs, implying the protein coating on NPs impeded the cellular uptake. Compared with undifferentiated cells, differentiated ones possessed much lower uptake ability of these TiO2 NPs. Similarly, the traverse of TiO2 NPs through the Caco-2 monolayer was also negligible. Therefore, we infer the possibility of TiO2 NPs traversing through the intestine of animal or human after oral intake is quite low. This study provides valuable information for the risk assessment of TiO2 NPs in food.

  4. The changing role and work of British nurse tutors: a study within two demonstration Project 2000 districts.

    PubMed

    Camiah, S

    1996-02-01

    This study was designed to describe the main changes in the role and work of nurse tutors brought about by Project 2000 initiatives, with a view to exploring what the work of nurse tutors would be in the future. It was centred upon two demonstration Project 2000 districts, chosen to provide contrasts. Data were collected over a 15-month period from a range of stake-holders, but with the priority on nurse tutors themselves, using semi-structured individual and group interviews. The results showed that, in future, the role and work of nurse tutors would adapt to reflect the integration into a higher educational environment. The main changes expected include: alternative approaches to teaching and learning, for example student-centred teaching and open modes of study; greater subject specialization; more teaching across 'schools'; larger class involvement; more effective educational organization and management; closer liaison with the service provider units; and more effective time management. The study found that nurse tutors would be required to diversify their work through new initiatives, to undertake consultancy and research and to compete more for resources--developments which were not universally welcomed. PMID:8708256

  5. A digital process for additive manufacturing of occlusal splints: a clinical pilot study

    PubMed Central

    Salmi, Mika; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Ingman, Tuula; Mäkitie, Antti

    2013-01-01

    The aim of this study was to develop and evaluate a digital process for manufacturing of occlusal splints. An alginate impression was taken from the upper and lower jaws of a patient with temporomandibular disorder owing to cross bite and wear of the teeth, and then digitized using a table laser scanner. The scanned model was repaired using the 3Data Expert software, and a splint was designed with the Viscam RP software. A splint was manufactured from a biocompatible liquid photopolymer by stereolithography. The system employed in the process was SLA 350. The splint was worn nightly for six months. The patient adapted to the splint well and found it comfortable to use. The splint relieved tension in the patient's bite muscles. No sign of tooth wear or significant splint wear was detected after six months of testing. Modern digital technology enables us to manufacture clinically functional occlusal splints, which might reduce costs, dental technician working time and chair-side time. Maximum-dimensional errors of approximately 1 mm were found at thin walls and sharp corners of the splint when compared with the digital model. PMID:23614943

  6. Value addition of Palmyra palm and studies on the storage life.

    PubMed

    Chaurasiya, A K; Chakraborty, I; Saha, J

    2014-04-01

    Palmyra palm (Borassus flabellifer L.) belonging to the family Palmae is referred to as tree of life with several uses including food, beverage, fibre, medicinal and timber. Unfortunately, the nutritionally enriched pulp of ripened palm has limited commercial use. Extraction of pulp has been accomplished by using water and heat to ensure maximum pulp recovery. Different recipes were tried for the preparation of two uncommon value added products like palm spread and palm toffee. On the basis of biochemical composition, organoleptic scores, microbial estimation and storage study both under ambient and refrigerated conditions; the suitable recipe was selected with the maximum acceptability. Gradual increase in total soluble solid (TSS), total sugar and reducing sugar while decrease in ascorbic acid, pH, β-carotene and protein content of processed products have been observed irrespective of storage condition. The results obtained from sensory evaluation and microbial status revealed that palm spread and toffee remained acceptable up to 9 months and 8 months, respectively at ambient temperature. The income per rupee investment for these two products was found to be remunerative. PMID:24741173

  7. Structural analysis of closure cap barriers: A pre-test study for the Bentonite Mat Demonstration Project

    SciTech Connect

    Gong, Chung

    1993-10-01

    According to the EPA-recommended closure cap design a waste site can either be covered with a single layer cap made of 36 inches of compacted soil (clay) or with a multilayer cap consisting of an upper vegetative layer underlain by a drainage layer over a low permeability layer. The Bentonite Mat Demonstration Project (BMDP) is a field demonstration study to determine the construction/installation requirements, permeability, and subsidence performance characteristics of a composite barrier. The composite barrier will consist of on-site sandy-clay blanketed by a bentonite mat and a flexible High Density Polyethylene (HDPE) liner (also called flexible membrane liner). Construction of one control test pad and three bentonite test pads are planned. The control test pad will be used to establish baseline data. Underneath the composite clay cap is a four-foot loose sand layer in which cavities will be created by evacuation of sand. The present work provides a mathematical model for the BMDP. The mathematical model will be used to simulate the mechanical and structural responses of the composite clay cap during the testing processes. Based upon engineering experience and technical references, a set of nominal soil parameters have been selected. Currently, detailed soil test data and cavity configuration data are not available to validate the mathematical model. Since the configuration of the cavities created in the testing process is irregular and unpredictable, two extreme configurations are considered in this mathematical model, viz., the circular cavity and the infinitely long trench in the sand underneath the cap. This approach will provide bounds for the testing results.

  8. Subjective and Objective Measures of Hypersomnolence Demonstrate Divergent Associations with Depression among Participants in the Wisconsin Sleep Cohort Study

    PubMed Central

    Plante, David T.; Finn, Laurel A.; Hagen, Erika W.; Mignot, Emmanuel; Peppard, Paul E.

    2016-01-01

    Study Objectives: To examine associations of depression with habitual sleep duration, daytime sleepiness, and objective sleep propensity in a nonclinical population. Methods: Data from adults participating in the Wisconsin Sleep Cohort Study were utilized in analyses. There were 1,287 adults (3,324 observations) who were used in the analysis of subjective hypersomnolence measures; 1,155 adults (2,981 observations) were used in the analysis of objective sleep propensity assessed by the multiple sleep latency test (MSLT). Repeated-measures logistic regression estimated associations between presence of depression (defined as modified Zung Self-Rating Depression Scale ≥ 50 or use of antidepressant medications) and three primary hypersomnolence measures: subjective excessive daytime sleepiness (Epworth Sleepiness Scale [ESS] ≥ 11), self-reported sleep duration ≥ 9 h/d, and objective sleep propensity (MSLT mean sleep latency < 8 min). Results: After adjusting for age, sex, body mass index, chronic medical conditions, sedative hypnotic medication use, caffeine, tobacco, and alcohol use, sleep disordered breathing, as well as insomnia and sleep duration when appropriate, estimated odd ratios (95% confidence interval) for depression were: 1.56 (1.31,1.86) for ESS ≥ 11; 2.01 (1.49, 2.72) for habitual sleep time ≥ 9 h; and 0.76 (0.63–0.92) for MSLT mean sleep latency < 8 min. Conclusions: Our results demonstrate divergent associations between subjective and objective symptoms of hypersomnolence and depression, with subjective sleepiness and excessive sleep duration associated with increased odds of depression, but objective sleep propensity as measured by the MSLT associated with decreased odds of depression. Further research is indicated to explain this paradox and the impact of different hypersomnolence measures on the course of mood disorders. Commentary: A commentary on this article appears in this issue on page 467. Citation: Plante DT, Finn LA, Hagen EW

  9. Media Competition Implementation for the Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD): Adoption and Reach

    PubMed Central

    Criss, Shaniece; Cheung, Lilian; Giles, Catherine; Gortmaker, Steven; Viswanath, Kasisomayajula; Kwass, Jo-Ann; Davison, Kirsten

    2016-01-01

    The Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD) was a multi-level, multi-sector community intervention with a media competition component to provide an overarching synergy and promote awareness of target behaviors to reduce childhood obesity. Students participating in the media competition were tasked with developing videos, song/rap lyrics, and artwork that reflected the goals. The aim of this study is to document the process used to develop and implement the media competition along with its reach and adoption. An adapted version of Neta and colleagues’ 2015 framework on dissemination and implementation was used to summarize the process by which the media competition was developed and implemented. Adoption was defined by whether eligible schools or afterschool programs decided to implement the media competition. Reach was defined by student participation rates within schools/programs and the number of votes cast for the finalists on the coalition website and students’ paper ballots. A total of 595 students participated in the media competition from 18 school and afterschool programs in two communities. Adoption of the media competitions ranged from 22% to 100% in programs and reach ranged from 3% to 33% of the student population. The documentation of the implementation should contribute to the replication of the media competition. PMID:27058549

  10. The use of anatomical dolls as a demonstration aid in child sexual abuse interviews: a study of forensic interviewers' perceptions.

    PubMed

    Hlavka, Heather R; Olinger, Sara D; Lashley, Jodi L

    2010-09-01

    Given that most cases of child sexual abuse lack external corroborating evidence, children's verbal accounts of their experiences are of paramount importance to investigators. Forensic interviewers are charged with interviewing child victims and oftentimes use anatomical dolls. Yet, research on dolls has not caught up to practice in the field. Using a multimethod approach, this study presents new evidence on the function and value of using anatomical dolls as a demonstration aid. With a standardized protocol, forensic interviewers from an urban Midwestern Children's Advocacy Center evaluated the purpose and value of anatomical dolls in a forensic setting. Relationships between child characteristics and interviewer-perceived value were examined using descriptive, bivariate findings and case examples. Using a large and diverse sample of children, the study found that forensic interviewers perceived children as able and willing to use dolls for purposes of clarification, consistency, distancing, and communication. Results are discussed in the context of real-world applications and best practices and provide an evidence-based foundation for future research.

  11. Media Competition Implementation for the Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD): Adoption and Reach.

    PubMed

    Criss, Shaniece; Cheung, Lilian; Giles, Catherine; Gortmaker, Steven; Viswanath, Kasisomayajula; Kwass, Jo-Ann; Davison, Kirsten

    2016-04-05

    The Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD) was a multi-level, multi-sector community intervention with a media competition component to provide an overarching synergy and promote awareness of target behaviors to reduce childhood obesity. Students participating in the media competition were tasked with developing videos, song/rap lyrics, and artwork that reflected the goals. The aim of this study is to document the process used to develop and implement the media competition along with its reach and adoption. An adapted version of Neta and colleagues' 2015 framework on dissemination and implementation was used to summarize the process by which the media competition was developed and implemented. Adoption was defined by whether eligible schools or afterschool programs decided to implement the media competition. Reach was defined by student participation rates within schools/programs and the number of votes cast for the finalists on the coalition website and students' paper ballots. A total of 595 students participated in the media competition from 18 school and afterschool programs in two communities. Adoption of the media competitions ranged from 22% to 100% in programs and reach ranged from 3% to 33% of the student population. The documentation of the implementation should contribute to the replication of the media competition.

  12. Media Competition Implementation for the Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD): Adoption and Reach.

    PubMed

    Criss, Shaniece; Cheung, Lilian; Giles, Catherine; Gortmaker, Steven; Viswanath, Kasisomayajula; Kwass, Jo-Ann; Davison, Kirsten

    2016-04-01

    The Massachusetts Childhood Obesity Research Demonstration Study (MA-CORD) was a multi-level, multi-sector community intervention with a media competition component to provide an overarching synergy and promote awareness of target behaviors to reduce childhood obesity. Students participating in the media competition were tasked with developing videos, song/rap lyrics, and artwork that reflected the goals. The aim of this study is to document the process used to develop and implement the media competition along with its reach and adoption. An adapted version of Neta and colleagues' 2015 framework on dissemination and implementation was used to summarize the process by which the media competition was developed and implemented. Adoption was defined by whether eligible schools or afterschool programs decided to implement the media competition. Reach was defined by student participation rates within schools/programs and the number of votes cast for the finalists on the coalition website and students' paper ballots. A total of 595 students participated in the media competition from 18 school and afterschool programs in two communities. Adoption of the media competitions ranged from 22% to 100% in programs and reach ranged from 3% to 33% of the student population. The documentation of the implementation should contribute to the replication of the media competition. PMID:27058549

  13. Genetic association studies in complex disease: disentangling additional predisposing loci from associated neutral loci using a constrained - permutation approach.

    PubMed

    Spijker, G T; Nolte, I M; Jansen, R C; Te Meerman, G J

    2005-01-01

    In the process of genetically mapping a complex disease, the question may arise whether a certain polymorphism is the only causal variant in a region. A number of methods can answer this question, but unfortunately these methods are optimal for bi-allelic loci only. We wanted to develop a method that is more suited for multi-allelic loci, such as microsatellite markers. We propose the Additional Disease Loci Test (ADLT): the alleles at an additional locus are permuted within the subsample of haplotypes that have identical alleles at the predisposing locus. The hypothesis being tested is, whether the predisposing locus is the sole factor predisposing to the trait that is in LD with the additional locus under study. We applied ADLT to simulated datasets and a published dataset on Type 1 Diabetes, genotyped for microsatellite markers in the HLA-region. The method showed the expected number of false-positive results in the absence of additional loci, but proved to be more powerful than existing methods in the presence of additional disease loci. ADLT was especially superior in datasets with less LD or with multiple predisposing alleles. We conclude that the ADLT can be useful in identifying additional disease loci.

  14. Effect of Additives on Green Sand Molding Properties using Design of Experiments and Taguchi's Quality Loss Function - An Experimental Study

    NASA Astrophysics Data System (ADS)

    Desai, Bhagyashree; Mokashi, Pavani; Anand, R. L.; Burli, S. B.; Khandal, S. V.

    2016-09-01

    The experimental study aims to underseek the effect of various additives on the green sand molding properties as a particular combination of additives could yield desired sand properties. The input parameters (factors) selected were water and powder (Fly ash, Coconut shell and Tamarind) in three levels. Experiments were planned using design of experiments (DOE). On the basis of plans, experiments were conducted to understand the behavior of sand mould properties such as compression strength, shear strength, permeability number with various additives. From the experimental results it could be concluded that the factors have significant effect on the sand properties as P-value found to be less than 0.05 for all the cases studied. The optimization based on quality loss function was also performed. The study revealed that the quality loss associated with the tamarind powder was lesser compared to other additives selected for the study. The optimization based on quality loss function and the parametric analysis using ANOVA suggested that the tamarind powder of 8 gm per Kg of molding sand and moisture content of 7% yield better properties to obtain sound castings.

  15. A Pilot Study to Examine the Effect of Additional Structured Outdoor Playtime on Preschoolers' Physical Activity Levels

    ERIC Educational Resources Information Center

    Alhassan, Sofiya; Nwaokelemeh, Ogechi; Lyden, Kate; Goldsby, TaShauna; Mendoza, Albert

    2013-01-01

    The impact of additional structured outdoor playtime on preschoolers'; physical activity (PA) level is unclear. The purpose of this pilot study was to explore the effects of increasing structured outdoor playtime on preschoolers'; PA levels. Eight full-day classrooms (n = 134 children) from two preschool programmes were randomised into a treatment…

  16. STUDY OF THE EFFECT OF CHLORINE ADDITION ON MERCURY OXIDATION BY SCR CATALYST UNDER SIMULATED SUBBITUMINOUS COAL FLUE GAS

    EPA Science Inventory

    An entrained flow reactor is used to study the effect of addition of chlorine-containing species on the oxidation of elemental mercury (Hgo)by a selective catalytic reduction (SCR) catalyst in simulated subbituminous coal combustion flue gas. The combustion flue gas was doped wit...

  17. 77 FR 37059 - Draft Guidance for Industry on Active Controls in Studies To Demonstrate Effectiveness of a New...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... Demonstrate Effectiveness of a New Animal Drug for Use in Companion Animals; Availability AGENCY: Food and... Demonstrate Effectiveness of a New Animal Drug for Use in Companion Animals.'' This draft guidance advises... of new animal drugs for use in companion animals. The intent of the guidance is to...

  18. Reduced risk of hypoglycemia with once-daily glargine versus twice-daily NPH and number needed to harm with NPH to demonstrate the risk of one additional hypoglycemic event in type 2 diabetes: Evidence from a long-term controlled trial

    PubMed Central

    Rosenstock, Julio; Fonseca, Vivian; Schinzel, Stefan; Dain, Marie-Paule; Mullins, Peter; Riddle, Matthew

    2016-01-01

    Aims This analysis evaluated HbA1c-adjusted hypoglycemia risk with glargine versus neutral protamine Hagedorn (NPH) over a 5-year study in patients with Type 2 diabetes mellitus (T2DM). Clinical significance was assessed using number needed to harm (NNH) to demonstrate the risk of one additional patient experiencing at least one hypoglycemic event. Methods Individual patient-level data for symptomatic documented hypoglycemia and HbA1c values from a 5-year randomized study comparing once-daily glargine (n = 513) with twice-daily NPH (n = 504) were analyzed. Symptomatic hypoglycemia was categorized according to concurrent self-monitoring blood glucose levels and need for assistance. Hypoglycemic events per patient-year as a function of HbA1c were fitted by negative binomial regression using treatment and HbA1c at endpoint as independent variables. An estimate of NNH was derived from logistic regression models. Results The cumulative number of symptomatic hypoglycemia events was consistently lower with glargine compared with NPH over 5 years. Compared with twice-daily NPH, once-daily glargine treatment resulted in significantly lower adjusted odds ratios (OR) for all daytime hypoglycemia (OR 0.74; p = 0.030) and any severe event (OR 0.64; p = 0.035), representing a 26% and 36% reduction in the odds of daytime and severe hypoglycemia, respectively. Our model predicts that, if 25 patients were treated with NPH instead of glargine, then one additional patient would experience at least one severe hypoglycemic event. Conclusions This analysis of long-term insulin treatment confirms findings from short-term studies and demonstrates that glargine provides sustained, clinically meaningful reductions in risk of hypoglycemia compared with NPH in patients with T2DM. PMID:24856612

  19. The city of San Diego Environmental Service Department`s Ridgehaven green building demonstration project: Project case study. Final report

    SciTech Connect

    Gottfried, D.A.; Schoichet, E.A.

    1998-05-01

    This case study describes the greening of Ridgehaven, the City of San Diego Environmental Services Department`s (ESD`s) new 73,000 sf{sup 2} headquarters building. The use of green design techniques within the conventional renovation of the existing structure significantly increased energy efficiency and indoor air quality (IAQ), and decreased the project`s environmental impact. Despite the constraining municipal budget, tight time schedule, and mandated public bidding procedures, the design team made energy efficiency, IAQ, and resource efficiency their primary design determinants. In the design phase the team screened materials and systems for environmental impact, and their effect on IAQ. Existing materials and systems were frequently reused, thus salvaging or recycling many items that might have gone to landfill. The design team also addressed the environmental impacts of construction and building operations. The ``Green Building Demonstration Program`` included educational outreach and the creation of a unique Manufacturer`s Partnership Program to highlight the effectiveness of green building products and systems. The evaluation featured computerized energy modeling and life-cycle based financial analysis to optimize the energy system design. The annual average energy consumption is designed to be close to 50% of the energy consumption for a comparable California Title 24 energy code compliant building, thus making it one of the most energy efficient buildings in San Diego.

  20. LIMB Demonstration Project Extension and Coolside Demonstration

    SciTech Connect

    Goots, T.R.; DePero, M.J.; Nolan, P.S.

    1992-11-10

    This report presents results from the limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. LIMB is a furnace sorbent injection technology designed for the reduction of sulfur dioxide (SO[sub 2]) and nitrogen oxides (NO[sub x]) emissions from coal-fired utility boilers. The testing was conducted on the 105 Mwe, coal-fired, Unit 4 boiler at Ohio Edison's Edgewater Station in Lorain, Ohio. In addition to the LIMB Extension activities, the overall project included demonstration of the Coolside process for S0[sub 2] removal for which a separate report has been issued. The primary purpose of the DOE LIMB Extension testing, was to demonstrate the generic applicability of LIMB technology. The program sought to characterize the S0[sub 2] emissions that result when various calcium-based sorbents are injected into the furnace, while burning coals having sulfur content ranging from 1.6 to 3.8 weight percent. The four sorbents used included calcitic limestone, dolomitic hydrated lime, calcitic hydrated lime, and calcitic hydrated lime with a small amount of added calcium lignosulfonate. The results include those obtained for the various coal/sorbent combinations and the effects of the LIMB process on boiler and plant operations.

  1. Enantioselective conjugate addition of nitro compounds to α,β-unsaturated ketones: an experimental and computational study.

    PubMed

    Manzano, Rubén; Andrés, José M; Álvarez, Rosana; Muruzábal, María D; de Lera, Ángel R; Pedrosa, Rafael

    2011-05-16

    A series of chiral thioureas derived from easily available diamines, prepared from α-amino acids, have been tested as catalysts in the enantioselective Michael additions of nitroalkanes to α,β-unsaturated ketones. The best results are obtained with the bifunctional catalyst prepared from L-valine. This thiourea promotes the reaction with high enantioselectivities and chemical yields for aryl/vinyl ketones, but the enantiomeric ratio for alkyl/vinyl derivatives is very modest. The addition of substituted nitromethanes led to the corresponding adducts with excellent enantioselectivity but very poor diastereoselectivity. Evidence for the isomerization of the addition products has been obtained from the reaction of chalcone with [D(3)]nitromethane, which shows that the final addition products epimerize under the reaction conditions. The epimerization explains the low diastereoselectivity observed in the formation of adducts with two adjacent tertiary stereocenters. Density functional studies of the transition structures corresponding to two alternative activation modes of the nitroalkanes and α,β-unsaturated ketones by the bifunctional organocatalyst have been carried out at the B3LYP/3-21G* level. The computations are consistent with a reaction model involving the Michael addition of the thiourea-activated nitronate to the ketone activated by the protonated amine of the organocatalyst. The enantioselectivities predicted by the computations are consistent with the experimental values obtained for aryl- and alkyl-substituted α,β-unsaturated ketones.

  2. Demonstration of risk based, goal driven framework for hydrological field campaigns and inverse modeling with case studies

    NASA Astrophysics Data System (ADS)

    Harken, B.; Geiges, A.; Rubin, Y.

    2013-12-01

    There are several stages in any hydrological modeling campaign, including: formulation and analysis of a priori information, data acquisition through field campaigns, inverse modeling, and forward modeling and prediction of some environmental performance metric (EPM). The EPM being predicted could be, for example, contaminant concentration, plume travel time, or aquifer recharge rate. These predictions often have significant bearing on some decision that must be made. Examples include: how to allocate limited remediation resources between multiple contaminated groundwater sites, where to place a waste repository site, and what extraction rates can be considered sustainable in an aquifer. Providing an answer to these questions depends on predictions of EPMs using forward models as well as levels of uncertainty related to these predictions. Uncertainty in model parameters, such as hydraulic conductivity, leads to uncertainty in EPM predictions. Often, field campaigns and inverse modeling efforts are planned and undertaken with reduction of parametric uncertainty as the objective. The tool of hypothesis testing allows this to be taken one step further by considering uncertainty reduction in the ultimate prediction of the EPM as the objective and gives a rational basis for weighing costs and benefits at each stage. When using the tool of statistical hypothesis testing, the EPM is cast into a binary outcome. This is formulated as null and alternative hypotheses, which can be accepted and rejected with statistical formality. When accounting for all sources of uncertainty at each stage, the level of significance of this test provides a rational basis for planning, optimization, and evaluation of the entire campaign. Case-specific information, such as consequences prediction error and site-specific costs can be used in establishing selection criteria based on what level of risk is deemed acceptable. This framework is demonstrated and discussed using various synthetic case

  3. Isotopic Analysis of Fingernails as a USGS Open House Demonstration of the Use of Stable Isotopes in Foodweb Studies

    NASA Astrophysics Data System (ADS)

    Silva, S. R.; Kendall, C.; Young, M. B.; Choy, D.

    2011-12-01

    The USGS Isotope Tracers Project uses stable isotopes and tritium to add a unique dimension of chemical information to a wide range of environmental investigations. The use and application of isotopes is usually an unfamiliar and even esoteric topic to the general public. Therefore during three USGS open house events, as a public outreach effort, we demonstrated the use of stable isotopes by analyzing nitrogen and carbon isotopes from very small fragments of fingernail from willing participants. We titled the exhibit "You Are What You Eat". The results from all participants were plotted on a graph indicating the general influence of different food groups on the composition of body tissues as represented by fingernails. All participants were assigned a number and no personal-identification information was collected. A subset of participants provided us with an estimate of the number of days a week various foods were eaten and if they were vegetarians, vegans or non-vegetarians. Volunteers from our research group were on hand to explain and discuss fundamental concepts such as how foods attain their isotopic composition, the difference between C3 and C4 plants, the effects of assimilation, trophic enrichment, and the various uses of stable isotopes in environmental studies. The results of the fingernail analyses showed the variation of the range of isotopic compositions among about 400 people at each event, the distinct influence of C4 plants (mainly corn and cane sugar) on our carbon isotopic composition, and the isotopic differences between vegetarians and non vegetarians among other details (http://wwwrcamnl.wr.usgs.gov/isoig/projects/fingernails/). A poll of visitors attending the open house event in 2006 indicated that "You Are What You Eat" was among the most popular exhibits. Following the first two open house events we were contacted by a group of researchers from Brazil who had completed a very similar study. Our collaboration resulted in a publication in

  4. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    SciTech Connect

    Raguvarun, K. Balasubramaniam, Krishnan Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Kapoor, Ajay; Hoye, Nicholas; Curiri, Dominic

    2015-03-31

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  5. Our Choice/Nuestra Opción: The Imperial County, California, Childhood Obesity Research Demonstration Study (CA-CORD)

    PubMed Central

    Ibarra, Leticia; Binggeli-Vallarta, Amy; Moody, Jamie; McKenzie, Thomas L.; Angulo, Janette; Hoyt, Helina; Chuang, Emmeline; Ganiats, Theodore G.; Gahagan, Sheila; Ji, Ming; Zive, Michelle; Schmied, Emily; Arredondo, Elva M.; Elder, John P.

    2015-01-01

    Abstract Background: Despite recent declines among young children, obesity remains a public health burden in the United States, including among Latino/Hispanic children. The determining factors are many and are too complex to fully address with interventions that focus on single factors, such as parenting behaviors or school policies. In this article, we describe a multisector, multilevel intervention to prevent and control childhood obesity in predominantly Mexican-origin communities in Southern California, one of three sites of the CDC-funded Childhood Obesity Research Demonstration (CA-CORD) study. Methods: CA-CORD is a partnership between a university-affiliated research institute, a federally qualified health center, and a county public health department. We used formative research, advisory committee members' recommendations, and previous research to inform the development of the CA-CORD project. Our theory-informed multisector, multilevel intervention targets improvements in four health behaviors: fruit, vegetable, and water consumption; physical activity; and quality sleep. Intervention partners include 1200 families, a federally qualified health center (including three clinics), 26 early care and education centers, two elementary school districts (and 20 elementary schools), three community recreation centers, and three restaurants. Intervention components in these sectors target changes in behaviors, policies, systems, and the social and physical environment. Evaluation activities include assessment of the primary outcome, BMI z-score, at baseline, 12-, and 18-months post-baseline, and sector evaluations at baseline, 12, and 24 months. Conclusions: Identifying feasible and effective strategies to prevent and control childhood obesity has the potential to effect real changes in children's current and future health status. PMID:25584664

  6. Plasma lysosphingomyelin demonstrates great potential as a diagnostic biomarker for Niemann-Pick disease type C in a retrospective study.

    PubMed

    Welford, Richard W D; Garzotti, Marco; Marques Lourenço, Charles; Mengel, Eugen; Marquardt, Thorsten; Reunert, Janine; Amraoui, Yasmina; Kolb, Stefan A; Morand, Olivier; Groenen, Peter

    2014-01-01

    Niemann-Pick disease type C (NP-C) is a devastating, neurovisceral lysosomal storage disorder which is characterised by variable manifestation of visceral signs, progressive neuropsychiatric deterioration and premature death, caused by mutations in the NPC1 and NPC2 genes. Due to the complexity of diagnosis and the availability of an approved therapy in the EU, improved detection of NP-C may have a huge impact on future disease management. At the cellular level dysfunction or deficiency of either the NPC1 or NPC2 protein leads to a complex intracellular endosomal/lysosomal trafficking defect, and organ specific patterns of sphingolipid accumulation. Lysosphingolipids have been shown to be excellent biomarkers of sphingolipidosis in several enzyme deficient lysosomal storage disorders. Additionally, in a recent study the lysosphingolipids, lysosphingomyelin (SPC) and glucosylsphingosine (GlcSph), appeared to be elevated in the plasma of three adult NP-C patients. In order to investigate the clinical utility of SPC and GlcSph as diagnostic markers, an in-depth fit for purpose biomarker assay validation for measurement of these biomarkers in plasma by liquid chromatography-tandem mass spectrometry was performed. Plasma SPC and GlcSph are stable and can be measured accurately, precisely and reproducibly. In a retrospective analysis of 57 NP-C patients and 70 control subjects, median plasma SPC and GlcSph were significantly elevated in NP-C by 2.8-fold and 1.4-fold respectively. For miglustat-naïve NP-C patients, aged 2-50 years, the area under the ROC curve was 0.999 for SPC and 0.776 for GlcSph. Plasma GlcSph did not correlate with SPC levels in NP-C patients. The data indicate excellent potential for the use of lysosphingomyelin in NP-C diagnosis, where it could be used to identify NP-C patients for confirmatory genetic testing. PMID:25479233

  7. TRW utility demonstration unit

    SciTech Connect

    Not Available

    1990-01-01

    The TRW Advanced Entrained Coal Combustor Demonstration Project consists of retrofitting Orange and Rockland (O R) Utility Corporation's Lovett Plant Unit No. 3 with four (4) slagging combustors which will allow the gas/oil unit to fire 2.5% sulfur coal. The slagging combustor process will provide NO{sub x} and SO{sub x} emissions that meet NSPS and New York State Environmental Standards. During this report period, activity continued to address the total program funding shortfall. Ideas and responsibilities for further evaluation have been put forward to reduce the shortfall. In addition, an effort aimed at gaining additional program sponsorships, was initiated.

  8. Flagship Technology Demonstrations (FTD)

    NASA Video Gallery

    Mike Conley delivers a presentation from the Flagship Technology Demonstrations (FTD) study team on May 25, 2010, at the NASA Exploration Enterprise Workshop held in Galveston, TX. The purpose of t...

  9. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  10. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  11. Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

    NASA Astrophysics Data System (ADS)

    Marya, Manuel; Singh, Virendra; Marya, Surendar; Hascoet, Jean Yves

    2015-08-01

    Additive manufacturing (AM) brings disruptive changes to the ways parts, and products are designed, fabricated, tested, qualified, inspected, marketed, and sold. These changes introduce novel technical challenges and concerns arising from the maturity and diversity of today's AM processes, feedstock materials, and process parameter interactions. AM bears a resemblance with laser and electron beam welding in the so-called conduction mode, which involves a multitude of dynamic physical events between the projected feedstock and a moving heat source that eventually influence AM part properties. For this paper, an air vent was selected for its thin-walled, hollow, and variable cross section, and limited size. The studied air vents, randomly selected from a qualification batch, were fabricated out of 316L stainless steel using a 4 kW fiber laser powder-fed AM system, referred to as construction laser additive direct (CLAD). These were systematically characterized by microhardness indentation, visual examination, optical and scanning electron microscopy, and electron-back-scattering diffraction in order to determine AM part suitability for service and also broadly discuss metallurgical phenomena. The paper then briefly expands the discussion to include additional engineering alloys and further analyze relationships between AM process parameters and AM part properties, consistently utilizing past experience with the same powder-fed CLAD 3D printer, the well-established science and technology of welding and joining, and recent publications on additive manufacturing.

  12. AVNG system demonstration

    SciTech Connect

    Thron, Jonathan Louis; Mac Arthur, Duncan W; Kondratov, Sergey; Livke, Alexander; Razinkov, Sergey

    2010-01-01

    An attribute measurement system (AMS) measures a number of unclassified attributes of potentially classified material. By only displaying these unclassified results as red or green lights, the AMS protects potentially classified information while still generating confidence in the measurement result. The AVNG implementation that we describe is an AMS built by RFNC - VNIIEF in Sarov, Russia. To provide additional confidence, the AVNG was designed with two modes of operation. In the secure mode, potentially classified measurements can be made with only the simple red light/green light display. In the open mode, known unclassified material can be measured with complete display of the information collected from the radiation detectors. The AVNG demonstration, which occurred in Sarov, Russia in June 2009 for a joint US/Russian audience, included exercising both modes of AVNG operation using a number of multi-kg plutonium sources. In addition to describing the demonstration, we will show photographs and/or video taken of AVNG operation.

  13. Effect of One Percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study

    PubMed Central

    Asokan, Sharath; John, J Baby; Priya, PR Geetha; Devi, Jagadeesan Gnana

    2015-01-01

    ABSTRACT Aim: The aim of the study was to evaluate the effect of addition of 1% chlorhexidine digluconate solution on the antibacterial activity and mechanical properties of glass ionomer and resin based sealant. Materials and methods: Conventional glass ionomer sealant (GIS) (Fuji VII, Japan) and resin sealant (Clinpro 3M ESPE, USA) were used in this study. Chlorhexidine digluconate (CHX) (20%) liquid was added to both the sealants, and the concentration of chlorhexidine in sealants was adjusted to 1%. The sealants were divided into four groups as: group A (GIS), group B (GIS + 1% CHX), group C (resin sealant), group D (resin sealant + 1% CHX). Five cylindrical specimens were prepared in each group. Their antibacterial activity against Streptococcus mutans and Lactobacillus acidophilus, and their mechanical properties (compressive strength and diametrical tensile strength) were assessed. Mann-Whitney and Wilcoxon signed rank test were used appropriately for statistical analysis (SPSS version 19). Result: Addition of one percent chlorhexidine significantly increased the antibacterial activity of both the sealants. There was a significant difference between groups A and B (p < 0.009), and groups C and D (p < 0.008). There was no significant difference in the mechanical properties of the sealants. Conclusion: Addition of one percent chlorhexidine to the glass ionomer and resin based sealants provided sufficient antibacterial activity, without significantly affecting the mechanical property of the sealants. How to cite this article: Shanmugaavel AK, Asokan S, John JB, Geetha Priya PR, Gnana Devi J. Effect of one percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study. Int J Clin Pediatr Dent 2015;8(3):196-201. PMID:26628854

  14. A study on the effect of halloysite nanoparticle addition on the strength of glass fiber reinforced plastic

    NASA Astrophysics Data System (ADS)

    Kim, Yun-Hae; Park, Soo-Jeong; Lee, Jin-Woo; Moon, Kyung-Man

    2015-03-01

    Halloysite nanotube, which has been used in the polymer, has been spotlighted as a useful functional materials in the improvement of mechanical properties. In the current study, we established the optimal nanoparticle dispersion and analyzed the mechanical characteristics and the behavior of composites reinforced by HNTs have been synthesized by dispersing HNTs to the unsaturated polyester resin (UPR) and their mechanical characteristics, especially the tensile strength, interlaminar shear strength have been analyzed. Additionally, the reinforcement effect and its variation according to the amount of HNTs was also studied.

  15. Known and Unknown Weaknesses in Software Animated Demonstrations (Screencasts): A Study in Self-Paced Learning Settings

    ERIC Educational Resources Information Center

    Palaigeorgiou, George; Despotakis, Theofanis

    2010-01-01

    Learning about computers continues to be regarded as a rather informal and complex landscape dominated by individual exploratory and opportunistic approaches, even for students and instructors in Computer Science Departments. During the last two decades, software animated demonstrations (SADs), also known as screencasts, have attracted particular…

  16. Using Discrepant Events in Science Demonstrations to Promote Student Engagement in Scientific Investigations: An Action Research Study

    ERIC Educational Resources Information Center

    Mancuso, Vincent J.

    2010-01-01

    Students' scientific investigations have been identified in national standards and related reform documents as a critical component of students' learning experiences in school, yet it is not easy to implement them in science classrooms. Could science demonstrations help science teachers put this recommendation into practice? While demonstrations…

  17. A quantum chemical study of the mechanisms of olefin addition to group 9 transition metal dioxo compounds.

    PubMed

    Ahmed, Issahaku; Tia, Richard; Adei, Evans

    2016-01-01

    triplet PES than on the singlet PES for the formation of similar analogues. There are fewer competitive reaction pathways on the triplet surface than on the singlet PES. Also, cycloadditions that seem impossible on the singlet PES seem possible on the doublet and or triplet PESs, this is the case typically for the Rh and Co complexes, illustrating the importance of multiple spin states in organometallic reactions.Graphical AbstractTable of Contents Synopsis: A study of the mechanism of ethylene addition to MO2(CH2)(CH3)(M=Co,Rh,Ir) shows the reactions of the Co complex have lower activation barriers for the preferred [3+2] and [2+2] addition pathways and fewer side reactions than those of Rh and Ir. Reactions are more feasible and selective on the triplet PES than on the singlet PES. These illustrate the importance of multiple spin states in organometallic reactions and shows catalyst activity and selectivity decreases down the group.

  18. A fundamental study of the oxidation behavior of SI primary reference fuels with propionaldehyde and DTBP as an additive

    NASA Astrophysics Data System (ADS)

    Johnson, Rodney

    In an effort to combine the benefits of SI and CI engines, Homogeneous Charge Compression Ignition (HCCI) engines are being developed. HCCI combustion is achieved by controlling the temperature, pressure, and composition of the fuel and air mixture so that autoignition occurs in proper phasing with the piston motion. This control system is fundamentally more challenging than using a spark plug or fuel injector to determine ignition timing as in SI and CI engines, respectively. As a result, this is a technical barrier that must be overcome to make HCCI engines applicable to a wide range of vehicles and viable for high volume production. One way to tailor the autoignition timing is to use small amounts of ignition enhancing additives. In this study, the effect of the addition of DTBP and propionaldehyde on the autoignition behavior of SI primary reference fuels was investigated. The present work was conducted in a new research facility built around a single cylinder Cooperative Fuels Research (CFR) octane rating engine but modified to run in HCCI mode. It focused on the effect of select oxygenated hydrocarbons on hydrocarbon fuel oxidation, specifically, the primary reference fuels n-heptane and iso-octane. This work was conducted under HCCI operating conditions. Previously, the operating parameters for this engine were validated for stable combustion under a wide range of operating parameters such as engine speeds, equivalence ratios, compression ratios and inlet manifold temperature. The stable operating range under these conditions was recorded and used for the present study. The major focus of this study was to examine the effect of the addition of DTBP or propionaldehyde on the oxidation behavior of SI primary reference fuels. Under every test condition the addition of the additives DTBP and propionaldehyde caused a change in fuel oxidation. DTBP always promoted fuel oxidation while propionaldehyde promoted oxidation for lower octane number fuels and delayed

  19. The clinical utility of genetic testing in breast cancer kindreds: a prospective study in families without a demonstrable BRCA mutation.

    PubMed

    Møller, Pål; Stormorken, Astrid; Holmen, Marit Muri; Hagen, Anne Irene; Vabø, Anita; Mæhle, Lovise

    2014-04-01

    We report prospectively observed risk for breast cancer in breast cancer kindreds without a demonstrable BRCA1/2 mutation. According to family history, the optimal available member(s) of each breast cancer kindred attending our clinic was tested for BRCA mutations. Women in families without a demonstrable BRCA mutation were subjected to annual mammography. BRCA mutations were demonstrated in 496/2,118 (23 %) breast cancer kindreds. In families without a demonstrable BRCA mutation, a total of 3,161 healthy women aged 25-59 years were prospectively followed for 24,808 observation years. Sixty-four cancers were observed, compared to 34.0 expected (p < 0.01), arriving at a 7.9 % cumulative risk at age 60 compared to 4.0 % in the population [relative risk (RR) = 2.0]. Women with one mother or sister affected ≤50 years and with no other close relatives with breast cancer did not have increased risk (0 cancers observed and 0.6 expected at age 40, 11 cancers observed and 7.9 expected at age 60, p > 0.05). Excluding these, cumulative risk at 60 years was 8.8 % (RR = 2.2). The highest cumulative risk at 60 years was 11.4 %, found in families with two cases ≤55 years (RR = 2.8). In breast cancer kindreds without a demonstrable BRCA mutation, the risk for breast cancer in female first degree relatives was about twice the risk in the general population. Women with one early affected relative only did not have increased risk for early onset breast cancer, while those with more than one young affected relative had close to three times population risk.

  20. Applicability of the DPPH assay for evaluating the antioxidant capacity of food additives - inter-laboratory evaluation study -.

    PubMed

    Shimamura, Tomoko; Sumikura, Yoshihiro; Yamazaki, Takeshi; Tada, Atsuko; Kashiwagi, Takehiro; Ishikawa, Hiroya; Matsui, Toshiro; Sugimoto, Naoki; Akiyama, Hiroshi; Ukeda, Hiroyuki

    2014-01-01

    An inter-laboratory evaluation study was conducted in order to evaluate the antioxidant capacity of food additives by using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. Four antioxidants used as existing food additives (i.e., tea extract, grape seed extract, enju extract, and d-α-tocopherol) and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) were used as analytical samples, and 14 laboratories participated in this study. The repeatability relative standard deviation (RSD(r)) of the IC50 of Trolox, four antioxidants, and the Trolox equivalent antioxidant capacity (TEAC) were 1.8-2.2%, 2.2-2.9%, and 2.1-2.5%, respectively. Thus, the proposed DPPH assay showed good performance within the same laboratory. The reproducibility relative standard deviation (RSD(R)) of IC50 of Trolox, four antioxidants, and TEAC were 4.0-7.9%, 6.0-11%, and 3.7-9.3%, respectively. The RSD(R)/RSD(r) values of TEAC were lower than, or nearly equal to, those of IC50 of the four antioxidants, suggesting that the use of TEAC was effective for reducing the variance among the laboratories. These results showed that the proposed DPPH assay could be used as a standard method to evaluate the antioxidant capacity of food additives.

  1. The influence of deposit control additives on nitrogen oxides emissions from spark ignition engines (case study: Tehran).

    PubMed

    Bidhendi, Gholamreza Nabi; Zand, Ali Daryabeigi; Tabrizi, Alireza Mikaeili; Pezeshk, Hamid; Baghvand, Akbar

    2007-04-15

    In the present research, the influence of a deposit control additive on NOx emissions from two types of gasoline engine vehicles i.e., Peykan (base on Hillman) and Pride (South Korea Kia motors) was studied. Exhaust NOx emissions were measured in to stages, before decarbonization process and after that. Statistical analysis was conducted on the measurement results. Results showed that NOx emissions from Peykans increased 0.28% and NOx emissions from Pride automobiles decreased 6.18% on average, due to the elimination of engine deposits. The observed variations were not statistically and practically significant. The results indicated that making use of detergent additives is not an effective way to reduce the exhaust NOx emissions from gasoline engine vehicles. PMID:19069943

  2. Study and Demonstration of Planning and Scheduling Concepts for the Earth Observing System Data and Information System

    NASA Technical Reports Server (NTRS)

    Davis, Randal; Thalman, Nancy

    1993-01-01

    The University of Colorado's Laboratory for Atmospheric and Space Physics (CU/LASP) along with the Goddard Space Flight Center (GSFC) and the Jet Propulsion Laboratory (JPL) designed, implemented, tested, and demonstrated a prototype of the distributed, hierarchical planning and scheduling system comtemplated for the Earth Observing System (EOS) project. The planning and scheduling prototype made use of existing systems: CU/LASP's Operations and Science Instrument Support Planning and Scheduling (OASIS-PS) software package; GSFC's Request Oriented Scheduling Engine (ROSE); and JPL's Plan Integrated Timeliner 2 (Plan-It-2). Using these tools, four scheduling nodes were implemented and tied together using a new communications protocol for scheduling applications called the Scheduling Applications Interface Language (SAIL). An extensive and realistic scenario of EOS satellite operations was then developed and the prototype scheduling system was tested and demonstrated using the scenario. Two demonstrations of the system were given to NASA personnel and EOS core system (ECS) contractor personnel. A comprehensive volume of lessons learned was generated and a meeting was held with NASA and ECS representatives to review these lessons learned. A paper and presentation on the project's final results was given at the American Institute of Aeronautics and Astronautics Computing in Aerospace 9 conference.

  3. Light Water Reactor Sustainability Program Risk Informed Safety Margin Characterization (RISMC) Advanced Test Reactor Demonstration Case Study

    SciTech Connect

    Curtis Smith; David Schwieder; Cherie Phelan; Anh Bui; Paul Bayless

    2012-08-01

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the RISMC Pathway R&D is to support plant decisions for risk-informed margins management with the aim to improve economics, reliability, and sustain safety of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced “RISMC toolkit” that enables more accurate representation of NPP safety margin. This report describes the RISMC methodology demonstration where the Advanced Test Reactor (ATR) was used as a test-bed for purposes of determining safety margins. As part of the demonstration, we describe how both the thermal-hydraulics and probabilistic safety calculations are integrated and used to quantify margin management strategies.

  4. Meta-analysis of high-latitude nitrogen-addition and warming studies implies ecological mechanisms overlooked by land models

    DOE PAGES

    Bouskill, N. J.; Riley, W. J.; Tang, J. Y.

    2014-12-11

    Accurate representation of ecosystem processes in land models is crucial for reducing predictive uncertainty in energy and greenhouse gas feedbacks with the climate. Here we describe an observational and modeling meta-analysis approach to benchmark land models, and apply the method to the land model CLM4.5 with two versions of belowground biogeochemistry. We focused our analysis on the aboveground and belowground responses to warming and nitrogen addition in high-latitude ecosystems, and identified absent or poorly parameterized mechanisms in CLM4.5. While the two model versions predicted similar soil carbon stock trajectories following both warming and nitrogen addition, other predicted variables (e.g., belowgroundmore » respiration) differed from observations in both magnitude and direction, indicating that CLM4.5 has inadequate underlying mechanisms for representing high-latitude ecosystems. On the basis of observational synthesis, we attribute the model–observation differences to missing representations of microbial dynamics, aboveground and belowground coupling, and nutrient cycling, and we use the observational meta-analysis to discuss potential approaches to improving the current models. However, we also urge caution concerning the selection of data sets and experiments for meta-analysis. For example, the concentrations of nitrogen applied in the synthesized field experiments (average = 72 kg ha-1 yr-1) are many times higher than projected soil nitrogen concentrations (from nitrogen deposition and release during mineralization), which precludes a rigorous evaluation of the model responses to likely nitrogen perturbations. Overall, we demonstrate that elucidating ecological mechanisms via meta-analysis can identify deficiencies in ecosystem models and empirical experiments.« less

  5. Assessing clinical outcomes of patients with acute calculous cholecystitis in addition to the Tokyo grading: a retrospective study.

    PubMed

    Cheng, Wei-Chun; Chiu, Yen-Cheng; Chuang, Chiao-Hsiung; Chen, Chiung-Yu

    2014-09-01

    The management of acute cholecystitis is still based on clinical expertise. This study aims to investigate whether the outcome of acute cholecystitis can be related to the severity criteria of the Tokyo guidelines and additional clinical comorbidities. A total of 103 patients with acute cholecystitis were retrospectively enrolled and their medical records were reviewed. They were all classified according to therapeutic modality, including early cholecystectomy and antibiotic treatment with or without percutaneous cholecystostomy. The impact of the Tokyo guidelines and the presence of comorbidities on clinical outcome were assessed by univariate and multivariate regression analyses. According to Tokyo severity grading, 48 patients were Grade I, 31 patients were Grade II, and 24 patients were Grade III. The Grade III patients had a longer hospital stay than Grade II and Grade I patients (15.2 days, 9.2 days, and 7.3 days, respectively, p < 0.05). According to multivariate analysis, patients with Grade III Tokyo severity, higher Charlson's Comorbidity Score, and encountering complications had a longer hospital stay. Based on treatment modality, surgeons selected the patients with less severity and fewer comorbidities for cholecystectomy, and these patients had a shorter hospital stay. In addition to the grading of the Tokyo guidelines, comorbidities had an additional impact on clinical outcomes and should be an important consideration when making therapeutic decisions.

  6. Spectrophotometric study of complexation equilibria with H-point standard addition and H-point curve isolation methods.

    PubMed

    Abdollahi, H; Zeinali, S

    2004-01-01

    The use of H-point curve isolation (HPCIM) and H-point standard addition methods (HPSAM) for spectrophotometric studies of complex formation equilibria are proposed. One step complex formation, two successive stepwise and mononuclear complex formation systems, and competitive complexation systems are studied successfully by the proposed methods. HPCIM is used for extracting the spectrum of complex or sum of complex species and HPSAM is used for calculation of equilibrium concentrations of ligand for each sample. The outputs of these procedures are complete concentration profiles of equilibrium system, spectral profile of intermediate components, and good estimation of conditional formation constants. The reliability of the method is evaluated using model data. Spectrophotometric studies of murexide-calcium, dithizone-nickel, methyl thymol blue (MTB)-copper, and competition of murexide and sulfate ions for complexation with zinc, are used as experimental model systems with different complexation stoichiometries and spectral overlapping of involved components.

  7. Probiotics in addition to antibiotics for the treatment of acute tonsillitis: a randomized, placebo-controlled study.

    PubMed

    Gilbey, P; Livshits, L; Sharabi-Nov, A; Avraham, Y; Miron, D

    2015-05-01

    Probiotics are live microorganisms which, when administered in adequate amounts, confer a health benefit on the host. The probiotic Streptococcus salivarius has been shown to be effective in reducing the frequency of recurrent pharyngeal infections in children and adult populations. However, probiotics have not yet been evaluated in the treatment of acute pharyngotonsillitis in adults. We aimed to examine whether the addition of S. salivarius probiotics to the routine therapy of acute pharyngotonsillitis in adult patients may shorten disease duration and reduce symptom severity. This study was a prospective, randomized, placebo-controlled, double-blinded study comparing treatment with probiotics to placebo in addition to antibiotics in patients who were hospitalized with severe pharyngotonsillitis. Laboratory results, pain levels, body temperature, and daily volume of fluids consumed were recorded for both groups. Sixty participants were recruited, 30 for each group. No statistically significant differences between the two groups were observed regarding any of the major clinical and laboratory parameters examined. Supplement probiotic treatment with S. salivarius in patients with acute pharyngotonsillitis treated with penicillin is ineffective in relation to the parameters examined in this study and we cannot, therefore, recommend the use of S. salivarius during active pharyngotonsillar infection treated with penicillin.

  8. A study on the effect of the polymeric additive HPMC on morphology and polymorphism of ortho-aminobenzoic acid crystals

    NASA Astrophysics Data System (ADS)

    Simone, E.; Cenzato, M. V.; Nagy, Z. K.

    2016-07-01

    In the present study, the effect of Hydroxy Propyl Methyl Cellulose (HPMC) on the crystallization of ortho-aminobenzoic acid (OABA) was investigated by seeded and unseeded cooling crystallization experiments. The influence of HPMC on the induction time, crystal shape of Forms I and II of OABA and the polymorphic transformation time was studied. Furthermore, the capability of HPMC to inhibit growth of Form I was evaluated quantitatively and modeled using population balance equations (PBE) solved with the method of moments. The additive was found to strongly inhibit nucleation and growth of Form I as well as to increase the time for the polymorphic transformation from Form II to I. Solvent was also found to influence the shape of Form I crystals at equal concentrations of HPMC. In situ process analytical technology (PAT) tools, including Raman spectroscopy, focused beam reflectance measurement (FBRM) and attenuated total reflectance (ATR) UV-vis spectroscopy were used in combination with off-line techniques, such as optical microscopy, scanning electron microscopy (SEM), Raman spectroscopy, Malvern Mastersizer and differential scanning calorimetry (DSC) to study the crystals produced. The results illustrate how shape, size and stability of the two polymorphs of OABA can be controlled and tailored using a polymeric additive.

  9. Lithium-ion Battery Demonstration for the 2007 NASA Desert Research and Technology Studies (Desert RATS) Program

    NASA Technical Reports Server (NTRS)

    Bennett, William; Baldwin, Richard

    2007-01-01

    The NASA Glenn Research Center (GRC) Electrochemistry Branch designed and produced five lithium-ion battery packs for demonstration in a portable life support system (PLSS) on spacesuit simulators. The experimental batteries incorporated advanced, NASA-developed electrolytes and included internal protection against over-current, over-discharge and over-temperature. The 500-gram batteries were designed to deliver a constant power of 38 watts over 103 minutes of discharge time (130 Wh/kg). Battery design details are described and field and laboratory test results are summarized.

  10. Can additional urban development have major impacts on streamflow of a peri-urban catchment? A case study from Portugal

    NASA Astrophysics Data System (ADS)

    Ferreira, Carla; Walsh, Rory; Nunes, João; Steenhuis, Tammo; de Lima, João; Coelho, Celeste; Ferreira, António

    2016-04-01

    It is well known that urban development brings about changes in hydrological response. Relatively little, however, is known about impacts on streamflow during urban development in the Mediterranean climate. This paper examines changes in streamflow resulting from the construction of an enterprise park, a major road and apartment blocks in a small partially urbanized peri-urban catchment (6.2 km2) in central Portugal. These developments led to an increase in urban area from 32% to 40% over a five-year period (hydrological years 2008/09-2012/13). In the initial two-year period minor land-use changes increased impervious surfaces from 12.8% to 13.2%. The subsequent three-year period led to a further 17.2% increase in impervious area. Streamflow was recorded by a V-notch weir at the catchment outlet. Rainfall was recorded at a weather station 0.5km north of the catchment, and by five tipping-bucket raingauges installed in January 2011 within the study catchment. Annual runoff and storm runoff coefficients ranged from 14% to 21% and 9% to 14%, respectively, recorded in 2011/12 and 2012/13. Although these differences in runoff were caused in part by variation in rainfall, the comparison between 2009/10 (pre-) and 2012/13 (post-additional urban development), with broadly similar rainfall (887mm vs 947mm, respectively) and evapotranspiration (740mm vs 746mm), showed a 43% increase in storm runoff (from 90mm to 129mm), resulting from additional overland flow generated largely by the 4.4% increase in impervious surfaces. The additional urban development also led to changes in hydrograph parameters. The increase in storm runoff was not progressive over the study period, but regression lines of storm runoff against rainstorm parameters exhibited higher vertical positions in 2012/13 than 2008/09. Increasing peak flows, however, were more progressive over the study period, with annual regression lines displaying higher vertical positions, but with a clear distance between pre

  11. Effect of low-addition soft contact lenses with decentered optical design on myopia progression in children: a pilot study

    PubMed Central

    Fujikado, Takashi; Ninomiya, Sayuri; Kobayashi, Takuma; Suzaki, Asaki; Nakada, Mitsuhiko; Nishida, Kohji

    2014-01-01

    Purpose To investigate the effect of low-addition soft contact lenses (CLs) with decentered optical design on the progression of myopia in children in a pilot study. Subjects and methods Twenty-four Japanese children age 10–16 years with baseline myopia of −0.75 to −3.50 D sphere and ≤1.00 D cylinder were studied. The new CLs were designed to have a nasal decentration with the optical center centered on the line of sight, and with progressive-addition power of +0.5 D peripherally. Monofocal soft CLs were used as controls. A pair of new CLs or control CLs was randomly assigned to the children, and they wore the lenses for 12 months during the first phase. Then, the type of CLs was changed, ie, a crossover design, and the children were observed for another 12 months during the second phase. The end points were changes in axial length and refractive error (spherical equivalent) under cycloplegia. Results The change of axial length in the new-CL and control-CL groups was not different between 12 months and baseline, the change of axial length between 12 months and 1 month in the new-CL group (0.09±0.08 mm) was significantly smaller (47%) than that in the control-CL group (0.17±0.08 mm, P<0.05). During the same period, the change of refractive error in the new-CL group was not significantly different from that in the control group. Neither the change in axial length nor refractive error in the new-CL group was significantly different from those in the control-CL group in the second phase. Conclusion This pilot study suggests that low-addition soft CLs with decentered optical design can reduce the degree of axial elongation in myopic children after an initial transient phase of CL wear. The reduction of the progression of myopia by low-addition soft CLs warrants further investigations. PMID:25284981

  12. Lunar Water Resource Demonstration

    NASA Technical Reports Server (NTRS)

    Muscatello, Anthony C.

    2008-01-01

    In cooperation with the Canadian Space Agency, the Northern Centre for Advanced Technology, Inc., the Carnegie-Mellon University, JPL, and NEPTEC, NASA has undertaken the In-Situ Resource Utilization (ISRU) project called RESOLVE. This project is a ground demonstration of a system that would be sent to explore permanently shadowed polar lunar craters, drill into the regolith, determine what volatiles are present, and quantify them in addition to recovering oxygen by hydrogen reduction. The Lunar Prospector has determined these craters contain enhanced hydrogen concentrations averaging about 0.1%. If the hydrogen is in the form of water, the water concentration would be around 1%, which would translate into billions of tons of water on the Moon, a tremendous resource. The Lunar Water Resource Demonstration (LWRD) is a part of RESOLVE designed to capture lunar water and hydrogen and quantify them as a backup to gas chromatography analysis. This presentation will briefly review the design of LWRD and some of the results of testing the subsystem. RESOLVE is to be integrated with the Scarab rover from CMIJ and the whole system demonstrated on Mauna Kea on Hawaii in November 2008. The implications of lunar water for Mars exploration are two-fold: 1) RESOLVE and LWRD could be used in a similar fashion on Mars to locate and quantify water resources, and 2) electrolysis of lunar water could provide large amounts of liquid oxygen in LEO, leading to lower costs for travel to Mars, in addition to being very useful at lunar outposts.

  13. A DFT study of addition reaction between fragment ion (CH₂) units and fullerene (C₆₀) molecule.

    PubMed

    Zaragoza, Irineo Pedro; Vergara, Jaime; Pérez-Manríquez, Liliana; Salcedo, Roberto

    2011-05-01

    The theoretical study of the interaction between CH(2) and fullerene (C(60)) suggests the existence of an addition reaction mechanism; this feature is studied by applying an analysis of electronic properties. Several different effects are evident in this interaction as a consequence of the particular electronic transfer which occurs during the procedure. The addition or insertion of the methylene group results in a process, where the inclusion of CH(2) into a fullerene bond produces the formation of several geometric deformations. A simulation of these procedures was carried out, taking advantage of the dynamic semi-classical Born-Oppenheimer approximation. Dynamic aspects were analyzed at different speeds, for the interaction between the CH(2) group and the two bonds: CC (6, 6) and CC (6, 5) respectively on the fullerene (C(60)) rings. All calculations which involved electrons employed DFT as well as exchange and functional correlation. The results indicate a tendency for the CH(2) fragment to attack the CC (6, 5) bond. PMID:20658255

  14. Study on the Reutilization of Clear Fracturing Flowback Fluids in Surfactant Flooding with Additives for Enhanced Oil Recovery (EOR)

    PubMed Central

    Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

    2014-01-01

    An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10−3 mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical. PMID:25409507

  15. Experimental study on the characteristics of ventilated cavitation around an underwater navigating body influenced by turbulent drag-reducing additives

    NASA Astrophysics Data System (ADS)

    Jiang, ChenXing; Li, FengChen

    2015-09-01

    In this study, a new control strategy for turbulent drag reduction involving ventilated cavitation is proposed. The configurational and hydrodynamic characteristics of ventilated cavities influenced by turbulent drag-reducing additives were experimentally studied in water tunnel. The test model was fixed in the water tunnel by a strut in the aft-part. Aqueous solutions of CTAC/NaSal (cetyltrimethyl ammonium chloride/sodium salicylate) with weight concentrations of 100, 200, 400 and 600 ppm (part per million), respectively, were injected into the ventilated air cavity from the edge of the cavitator with accurate control by an injection pump. The cavity configurations were recorded by a high-speed CCD camera. The hydrodynamic characteristics of the test model were measured by a six-component balance. Experimental results show that, within the presently tested cases, the lengths of cavity influenced by drag-reducing solution are smaller than normal condition (ventilated cavity) in water, but the asymmetry of the cavity is improved. The drag resisted by the test model is reduced dramatically (the maximum drag reduction can reach to 80%) and the re-entrant jet is more complex after the CTAC solution is injected into the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitating asymmetry and further drag reduction.

  16. Does the addition of writing into a pharmacy communication skills course significantly impact student communicative learning outcomes? A pilot study.

    PubMed

    Lonie, John M; Rahim, Hamid

    2010-12-01

    The objective of this study was to determine if the addition of a reflective writing component in a fourth year (P-2) pharmacy communication skills course would significantly affect 2 measures of learning: (1) objective multiple choice examination questions and (2) a patient counseling Objective Structured Clinical Examination (OSCE) score. Using a nonequivalent group quasi-experimental retrospective comparison design, 98 randomly selected final examination scores from students taking a non-writing intensive (NWI) communication skills course were compared with 112 randomly selected final examination scores from students that took a communication skills course in which students engaged in several reflective writing assignments. In addition, 91 randomly selected patient counseling OSCE scores from a NWI course were statistically compared with 112 scores from students that took the writing intensive (WI) course. There were statistically significant improvements in multiple choice examination scores in the group that took the reflective writing communication skills course. There was not a statistically significant difference in patient counseling OSCE scores after students completed the WI course. Studying the effects of using reflective writing assignments in communication skills courses may improve the retention and retrieval of information presented within the course.

  17. A Phase I Dose Escalation Study Demonstrates Quercetin Safety and Explores Potential for Bioflavonoid Antivirals in Patients with Chronic Hepatitis C.

    PubMed

    Lu, Nu T; Crespi, Catherine M; Liu, Natalie M; Vu, James Q; Ahmadieh, Yasaman; Wu, Sheng; Lin, Sherry; McClune, Amy; Durazo, Francisco; Saab, Sammy; Han, Steven; Neiman, David C; Beaven, Simon; French, Samuel W

    2016-01-01

    The hepatitis C virus (HCV) infects more than 180 million people worldwide, with long-term consequences including liver failure and hepatocellular carcinoma. Quercetin bioflavonoids can decrease HCV production in tissue culture, in part through inhibition of heat shock proteins. If quercetin demonstrates safety and antiviral activity in patients, then it could be developed into an inexpensive HCV treatment for third world countries or other affected populations that lack financial means to cover the cost of mainstream antivirals. A phase 1 dose escalation study was performed to evaluate the safety of quercetin in 30 untreated patients with chronic HCV infection and to preliminarily characterize quercetin's potential in suppressing viral load and/or liver injury. Quercetin displayed safety in all trial participants. Additionally, 8 patients showed a "clinically meaningful" 0.41-log viral load decrease. There was a positive correlation (r = 0.41, p = 0.03) indicating a tendency for HCV decrease in patients with a lower ratio of plasma quercetin relative to dose. No significant changes in aspartate transaminase and alanine transaminase were detected. In conclusion, quercetin exhibited safety (up to 5 g daily) and there was a potential for antiviral activity in some hepatitis C patients.

  18. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Ding, Yaoyu; Kovacevic, Radovan

    2016-07-01

    Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

  19. A combined QM/MM study of the nucleophilic addition reaction of methanethiolate and N-methylacetamide.

    PubMed

    Byun, K; Gao, J

    2000-02-01

    A combined quantum mechanical (QM) and molecular mechanical (MM) method was used to study the nucleophilic addition reaction of methanethiolate to N-methylacetamide (NMA) in the gas phase and aqueous solution. At the B3LYP/aug-cc-pVDZ//HF/6-31 + G(d) level, the ion-dipole complex was found to be the global minimum on the potential energy surface in the gas phase with a binding energy of 21.2 kcal/mol. The complex has a C-S distance of 4.33 A, and no stabilized tetrahedral intermediate was located. The computed potential of mean force in water shows that solvent effects stabilize the reactants over the tetrahedral adduct by 36.5 kcal/mol, and that the tetrahedral intermediate does not exist for the present reaction in water. The present study provides an initial step for modeling the cysteine protease hydrolysis reactions in enzymes.

  20. Planetary and Space Science Education by Mathematica Demonstrations: Lunar Probe Planning, Instrumentations and Field Operation Simulations for Hunveyor Model by Studies of Surveyor

    NASA Astrophysics Data System (ADS)

    Kabai, S.; Bérczi, Sz.

    2008-03-01

    By interactive Mathematica Demonstrations of the Wolfram Research instrumentation, mechatronics and field operation simulations of lunar and martian space probes were studied focusing on our Surveyor- type educational space probe model: Hunveyor.

  1. Addition of immunosuppressive treatment to hemoperfusion is associated with improved survival after paraquat poisoning: a nationwide study.

    PubMed

    Wu, Wen-Pyng; Lai, Ming-Nan; Lin, Ching-Heng; Li, Yu-Fen; Lin, Ching-Yuang; Wu, Ming-Ju

    2014-01-01

    Paraquat poisoning associates very high mortality rate. Early treatment with hemoperfusion is strongly suggested by animal and human studies. Although the survival benefit of additional immunosuppressive treatment (IST) in combination with hemoperfusion is also reported since 1971, the large-scale randomized control trials to confirm the effects of IST is difficult to be executed. Therefore, we designed this nationwide large-scale population-based retrospective cohort study to investigate the outcome of paraquat poisoning with hemoperfusion and the additional effects of IST combined with hemoperfusion. This nationwide retrospective cohort study utilized data retrieved from the National Health Insurance Research Database (NHIRD) of Taiwan. A total of 1811 hospitalized patients with a diagnosis of paraquat poisoning who received hemoperfusion between 1997 and 2009 were enrolled. The mean age of all 1811 study subjects was 47.3 years. 70% was male. The overall survival rate was only 26.4%. Respiratory failure and renal failure were diagnosed in 56.2% and 36% patients. The average frequency of hemoperfusion was twice. IST was added in 42.2% patients. IST significantly increases survival rate (from 24.3% to 29.3%, P<0.001). The combined IST with methylprednisolone, cyclophosphamide and dexamethasone associates with the highest survival rate (48%, P<0.001). Moreover, patients younger than 45 years of age in the IST group had the best survival (41.0% vs. 33.7%, p<0.001). Our results support the use of IST with hemoperfusion for paraquat-poisoned patients. The best survival effect of IST is the combination of methylprednisolone, cyclophosphamide and daily dexamethasone, especially in patients with younger age.

  2. Dispersion interactions of carbohydrates with condensate aromatic moieties: theoretical study on the CH-π interaction additive properties.

    PubMed

    Kozmon, Stanislav; Matuška, Radek; Spiwok, Vojtěch; Koča, Jaroslav

    2011-08-21

    In this article we present the first systematic study of the additive properties (i.e. degree of additivity) of the carbohydrate-aromatic moiety CH-π dispersion interaction. The additive properties were studied on the β-D-glucopyranose, β-D-mannopyranose and α-L-fucopyranose complexes with the naphthalene molecule by comparing the monodentate (single CH-π) and bidentate (two CH-π) complexes. All model complexes were optimized using the DFT-D approach, at the BP/def2-TZVPP level of theory. The interaction energies were refined using single point calculations at highly correlated ab initio methods at the CCSD(T)/CBS level, calculated as E + (E(CCSD(T))-E(MP2))(Small Basis). Bidentate complexes show very strong interactions in the range from -10.79 up to -7.15 and -8.20 up to -6.14 kcal mol(-1) for the DFT-D and CCSD(T)/CBS level, respectively. These values were compared with the sum of interaction energies of the appropriate monodentate carbohydrate-naphthalene complexes. The comparison reveals that the bidentate complex interaction energy is higher (interaction is weaker) than the sum of monodentate complex interaction energies. Bidentate complex interaction energy corresponds to 2/3 of the sum of the appropriate monodentate complex interaction energies (averaging over all modeled carbohydrate complexes). The observed interaction energies were also compared with the sum of interaction energies of the corresponding previously published carbohydrate-benzene complexes. Also in this case the interaction energy of the bidentate complex was higher (i.e. weaker interaction) than the sum of interaction energies of the corresponding benzene complexes. However, the obtained difference is lower than before, while the bidentate complex interaction energy corresponds to 4/5 of the sum of interaction energy of the benzene complexes, averaged over all structures. The mentioned comparison might aid protein engineering efforts where amino acid residues phenylalanine or

  3. In-situ study of the influence of additives on the growth behavior of copper electrodeposits on copper single crystal

    NASA Astrophysics Data System (ADS)

    Wu, Aiwen

    Trace organic additives are known to be essential in obtaining desired metal electrodeposits in the microelectronic industry, however, fundamental design principles for their use and a scientific understanding of their interaction during electrodeposition is lacking. In the present study we investigated electrodeposition of copper on the Cu(100) surface in air-saturated or dearated acid-sulfate plating solutions containing several combinations of chloride and additives benzotriazole (BTA) and 3-mercapto propane sulfonic acid (MPSA) under galvanostatic pulse-current conditions. The electrodeposition process was followed using in-situ atomic force microscopy (AFM). AFM images were quantitatively analyzed by pattern-recognition and scaling procedures. In the absence of additives, copper deposits grew in a layer-by-layer mode from the earliest stage of deposition. The surface consisted of smooth terraces separated by steps. The scaling analysis result was consistent with a process dominated by surface diffusion and step growth. In chloride containing solutions, square-pyramidal mounds were initiated and grew to cover the surface. Mound slope increased with deposition time with no indication of reaching a steady-state value. This growth mode was consistent with a surface diffusion mechanism. The scaling result was similar to the additive-free system, but indicated that surface diffusion was more dominant in the presence of chloride. BTA inhibited the surface and produced nucleation-limited growth at hemispheroidal centers whose height to base radius aspect ratio increased linearly with deposition time. Nucleation and growth of three-dimensional nodules started randomly across the entire surface. The nodules were smaller in size than the mounds observed without BTA. The number and density of nodules were much higher than the mounds density. The deposit growth was dominated by a roughening mechanism that can be described by the random roughening term of a stochastic model

  4. Spacecraft servicing demonstration plan

    NASA Technical Reports Server (NTRS)

    Bergonz, F. H.; Bulboaca, M. A.; Derocher, W. L., Jr.

    1984-01-01

    A preliminary spacecraft servicing demonstration plan is prepared which leads to a fully verified operational on-orbit servicing system based on the module exchange, refueling, and resupply technologies. The resulting system can be applied at the space station, in low Earth orbit with an orbital maneuvering vehicle (OMV), or be carried with an OMV to geosynchronous orbit by an orbital transfer vehicle. The three phase plan includes ground demonstrations, cargo bay demonstrations, and free flight verifications. The plan emphasizes the exchange of multimission modular spacecraft (MMS) modules which involves space repairable satellites. Three servicer mechanism configurations are the engineering test unit, a protoflight quality unit, and two fully operational units that have been qualified and documented for use in free flight verification activity. The plan balances costs and risks by overlapping study phases, utilizing existing equipment for ground demonstrations, maximizing use of existing MMS equipment, and rental of a spacecraft bus.

  5. LIMB Demonstration Project Extension

    SciTech Connect

    Not Available

    1989-11-15

    The basic goal of the Limestone Injection Mitigation Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  6. Prefrontal cortex activity during motor tasks with additional mental load requiring attentional demand: a near-infrared spectroscopy study.

    PubMed

    Mandrick, Kevin; Derosiere, Gérard; Dray, Gérard; Coulon, Denis; Micallef, Jean-Paul; Perrey, Stéphane

    2013-07-01

    Functional near-infrared spectroscopy (fNIRS) is suitable for investigating cerebral oxygenation changes during motor and/or mental tasks. In the present study, we investigated how an additional mental load during a motor task at two submaximal loadings affects the fNIRS-measured brain activation over the right prefrontal cortex (PFC). Fifteen healthy males performed isometric grasping contractions at 15% and 30% of the maximal voluntary contraction (MVC) with or without an additional mental (i.e., arithmetic) task. Mental performance, force variability, fNIRS and subjective perception responses were measured in each condition. The performance of the mental task decreased significantly while the force variability increased significantly at 30% MVC as compared to 15% MVC, suggesting that performance of dual-task required more attentional resources. PFC activity increased significantly as the effort increased from 15% to 30% MVC (p<.001). Although a larger change in the deoxyhemoglobin was observed in dual-task conditions (p=.051), PFC activity did not change significantly as compared to the motor tasks alone. In summary, participants were unable to invest more attention and effort in performing the more difficult levels in order to maintain adequate mental performance.

  7. Prefrontal cortex activity during motor tasks with additional mental load requiring attentional demand: a near-infrared spectroscopy study.

    PubMed

    Mandrick, Kevin; Derosiere, Gérard; Dray, Gérard; Coulon, Denis; Micallef, Jean-Paul; Perrey, Stéphane

    2013-07-01

    Functional near-infrared spectroscopy (fNIRS) is suitable for investigating cerebral oxygenation changes during motor and/or mental tasks. In the present study, we investigated how an additional mental load during a motor task at two submaximal loadings affects the fNIRS-measured brain activation over the right prefrontal cortex (PFC). Fifteen healthy males performed isometric grasping contractions at 15% and 30% of the maximal voluntary contraction (MVC) with or without an additional mental (i.e., arithmetic) task. Mental performance, force variability, fNIRS and subjective perception responses were measured in each condition. The performance of the mental task decreased significantly while the force variability increased significantly at 30% MVC as compared to 15% MVC, suggesting that performance of dual-task required more attentional resources. PFC activity increased significantly as the effort increased from 15% to 30% MVC (p<.001). Although a larger change in the deoxyhemoglobin was observed in dual-task conditions (p=.051), PFC activity did not change significantly as compared to the motor tasks alone. In summary, participants were unable to invest more attention and effort in performing the more difficult levels in order to maintain adequate mental performance. PMID:23665138

  8. [Study on degradation of polycyclic aromatic hydrocarbons (PAHs) with different additional carbon sources in aged contaminated soil].

    PubMed

    Yin, Chun-Qin; Jiang, Xin; Wang, Fang; Wang, Cong-Ying

    2012-02-01

    This study was conducted with different additional carbon sources (such as: glucose, DL-malic acid, citrate, urea and ammonium acetate) to elucidate the degradation of polycyclic aromatic hydrocarbons (PAHs) in aged contaminated soil under an indoor simulation experiment. The results showed that the quantity of CO2 emission in different additional carbon sources treatments was obviously much more than that of check treatment in the first week, and the quantity of CO2 emission in DL-malic acid treatment was the largest. The average CO2 production decreased in an order urea > glucose approximately citrate approximately DL-malic acid approximately ammonium acetate > check. Meanwhile, the amount of volatized PAHs in applied carbon sources treatments was significantly less than that in check treatment. The amount of three volatized PAHs decreased in an order phenanthrene > fluoranthene > benzo(b)fluoranthene. Compared with the check treatment, the average degradation rates of the three PAHs were significantly augmented in the supplied carbon sources treatments, in which rates of the three PAHs were much higher in DL-malic acid and urea treatments than those in other treatments. The largest proportion of residual was benzo(b)fluoranthene (from 72% to 81%) among three PAHs compounds, followed by fluoranthene (from 53% to 70% ) and phenanthrene (from 27% to 44%).

  9. A Thrust and Impulse Study of Guanidinium Azo-Tetrazolate as an Additive for Hybrid Rocket Fuel

    NASA Astrophysics Data System (ADS)

    Patton, J.; Wright, A. M.; Dunn, L.; Alford, B.

    2000-03-01

    A thrust and impulse study of the hybrid rocket fuel additive Guanidinium Azo-Tetrazolate (GAT) was conducted at the University of Arkansas at Little Rock (UALR) Hybrid Rocket Facility. GAT is an organic salt with a high percentage of nitrogen. GAT was mixed with the standard hybrid rocket fuel, Hydroxyl-Terminated Polybutadiene (HTPB), in the concentration of 15%, by mass. The fuel grains with the GAT additive were fired for 4 second runs with the oxygen flows of 0.05, 0.07, 0.09, and 0.12 lbm/sec. For each run average thrust, total impulse, and specific impulse were measured. Average thrust, specific impulse, and total impulse vs. oxygen flow were plotted. Similar data was collected for plain HTPB/PAPI fuels for comparison. GAT was found to increase the thrust output when it was added to the standard hybrid rocket fuel, HTPB. GAT also increased the total impulse during the run. The thrust and total impulse were increased at all flows, but especially at the lower oxygen flow rates. Specific impulse only increased during the lower oxygen flow runs, and decreased slightly for the higher oxygen flow runs.

  10. Influence of CuO and ZnO addition on the multicomponent phosphate glasses: Spectroscopic studies

    NASA Astrophysics Data System (ADS)

    Szumera, Magdalena; Wacławska, Irena; Sułowska, Justyna

    2016-06-01

    The spectra of phosphate-silicate glasses from the P2O5-SiO2-K2O-MgO-CaO system modified with the addition of CuO or ZnO have been studied by means of FTIR, Raman and 31P MAS NMR spectroscopy. All glasses were synthesized by the conventional melt-quenching technique and their homogeneous chemical composition was controlled and confirmed. By using the aforementioned research techniques, the presence of structural units with various degrees of polymerization was shown in the structure of analyzed phosphate-silicate glasses: Q3, Q2, Q1 and Q0. It was found that an increase in the content of CuO or ZnO in the composition of analyzed glasses, which are introduced at the expense of decreasing amounts of CaO and MgO, has a different influence on the phospho-oxygen network. It was shown that copper ions cause its gradual polymerization, while zinc ions cause its depolymerization. At the same time, polymerization of the silico-oxygen subnetwork was found. Additionally, in the case of glasses containing increasing amounts of ZnO, a change of the role of zinc ions in the vitreous matrix was confirmed (from the modifier to a structure-forming component).

  11. Use of retailer fidelity card schemes in the assessment of food additive intake: Sunset Yellow a case study.

    PubMed

    Sardi, M; Haldemann, Y; Nordmann, H; Bottex, B; Safford, B; Smith, B; Tennant, D; Howlett, J; Jasti, P R

    2010-11-01

    The feasibility of using a retailer fidelity card scheme to estimate food additive intake was investigated using the Swiss retailer MIGROS's Cumulus Card and the example of the food colour Sunset Yellow (E 110). Information held within the card scheme was used to identify a sample of households purchasing foods containing Sunset Yellow over a 15 day period. A sample of 1204 households was selected for interview, of which 830 households were retained in the study following interview. Interviews were conducted to establish household structure, patterns of consumption by different individuals within the household, and the proportion of foods containing Sunset Yellow habitually purchased at the retailer and/or consumed outside the home. Information provided by the retailer on levels of Sunset Yellow in the foods was combined with the information obtained at interview to calculate the per-capita intake of Sunset Yellow by members of participating households. More than 99% of consumers (n = 1902) of foods containing Sunset Yellow were estimated to consume less than 1 mg Sunset Yellow kg(-1) body weight day(-1). The method proved to be a simple and resource-efficient approach to estimate food additive intake on the basis of actual consumer behaviour and thus reports results more closely related to the actual consumption of foods by individuals.

  12. Nucleation and growth study of nano-PbO2 on Ti in different additives for electrocatalytic oxidation process.

    PubMed

    Muthuraman, G; Moon, Il-Shik

    2013-08-01

    Electrocrystallization of PbO2 on Ti electrode was studied in different bath solutions using cyclic voltammetry (CV), chronoamperometry (CA), and scanning electron microscopy. The cyclic voltammetry studies revealed that the addition of methanol postponed the oxygen evolution region and made over potential nucleation of PbO2 on Ti. Oxidation of PbO2 is preferred in second cycle (a peak) in other studied bath solutions, except the Nafion and aniline containing solution. In the presence of the pyrrole, the PbO2 formed at under deposition potential with less in numbers. Nafion and aniline inclusion turn the process in to progressive nucleation and growth without inhibition. On the other hand, other solutions studied are revealed the instantaneous nucleation and growth or inhibition at high potentials. Surface morphology explained that approximately equal to 300 nm sizes PbO2 particles with vertical nucleation and growth phenomena evidenced the Nafion and aniline are the important dopants. The results indicated that large current density or high potential polarization can be obtained in presence of methanol, Nafion, and aniline, which is one of the most important and necessary factors for forming high surface area PbO2 with strong adherence towards mediated electro-oxidation process.

  13. Meta-analysis of high-latitude nitrogen-addition and warming studies imply ecological mechanisms overlooked by land models

    DOE PAGES

    Bouskill, N. J.; Riley, W. J.; Tang, J.

    2014-08-18

    Accurate representation of ecosystem processes in land models is crucial for reducing predictive uncertainty in energy and greenhouse gas feedbacks with the atmosphere. Here we describe an observational and modeling meta-analysis approach to benchmark land models, and apply the method to the land model CLM4.5 with two versions of belowground biogeochemistry. We focused our analysis on the above and belowground high-latitude ecosystem responses to warming and nitrogen addition, and identified mechanisms absent, or poorly parameterized in CLM4.5. While the two model versions predicted similar trajectories for soil carbon stocks following both types of perturbation, other variables (e.g., belowground respiration) differedmore » from the observations in both magnitude and direction, indicating the underlying mechanisms are inadequate for representing high-latitude ecosystems. The observational synthesis attribute these differences to missing representations of microbial dynamics, characterization of above and belowground functional processes, and nutrient competition. We use the observational meta-analyses to discuss potential approaches to improving the current models (e.g., the inclusion of dynamic vegetation or different microbial functional guilds), however, we also raise a cautionary note on the selection of data sets and experiments to be included in a meta-analysis. For example, the concentrations of nitrogen applied in the synthesized field experiments (average =72 kg ha-1 yr-1) are many times higher than projected soil nitrogen concentrations (from nitrogen deposition and release during mineralization), which preclude a rigorous evaluation of the model responses to nitrogen perturbation. Overall, we demonstrate here that elucidating ecological mechanisms via meta-analysis can identify deficiencies in both ecosystem models and empirical experiments.« less

  14. Study plan for conducting a section 316(a) demonstration: K-Reactor cooling tower, Savannah River Site

    SciTech Connect

    Paller, M.H.

    1991-02-01

    The K Reactor at the Savannah River Site (SRS) began operation in 1954. The K-Reactor pumped secondary cooling water from the Savannah River and discharged directly to the Indian Grave Branch, a tributary of Pen Branch which flows to the Savannah River. During earlier operations, the temperature and discharge rates of cooling water from the K-reactor were up to approximately 70{degree}C and 400 cfs, substantially altering the thermal and flow regimes of this stream. These discharges resulted in adverse impacts to the receiving stream and wetlands along the receiving stream. As a component of a Consent Order (84-4-W as amended) with the South Carolina Department of Health and Environmental Control, the Department of Energy (DOE) evaluated the alternatives for cooling thermal effluents from K Reactor and concluded that a natural draft recirculating cooling tower should be constructed. The cooling tower will mitigate thermal and flow factors that resulted in the previous impacts to the Indian Grave/Pen Branch ecosystem. The purpose of the proposed biological monitoring program is to provide information that will support a Section 316(a) Demonstration for Indian Grave Branch and Pen Branch when K-Reactor is operated with the recirculating cooling tower. The data will be used to determine that Indian Grave Branch and Pen Branch support Balanced Indigenous Communities when K-Reactor is operated with a recirculating cooling tower. 4 refs., 1 fig. 1 tab.

  15. In vivo studies of Scn5a+/− mice modeling Brugada syndrome demonstrate both conduction and repolarization abnormalities

    PubMed Central

    Martin, Claire A.; Zhang, Yanmin; Grace, Andrew A.; Huang, Christopher L.-H.

    2010-01-01

    Objectives We investigate the extent to which the electrocardiographic (ECG) properties of intact Scn5a+/− mice reproduce the corresponding clinical Brugada syndrome phenotype and use this model to investigate the role of conduction and repolarization abnormalities in the arrhythmogenic mechanism. Methods and Results The ECGs were obtained from anesthetized wild-type and Scn5a+/− mice, before and after administration of the known pro- and antiarrhythmic agents flecainide and quinidine. The ECG intervals were measured and their dispersions calculated. Scn5a+/− hearts showed ventricular arrhythmias, ST elevation, and conduction disorders including increased QT dispersion, accentuated by flecainide. Quinidine did not cause ventricular arrhythmias but exerted variable effects on ST segments and worsened conduction abnormalities. Conclusions The ECG features in an Scn5a+/− mouse establish it as a suitable model for Brugada syndrome and demonstrate abnormal conduction and repolarization phenomena. Altered QT dispersion, taken to indicate increased transmural repolarization gradients, may be useful in clinical risk stratification. PMID:20638671

  16. Feasibility Study for a Near Term Demonstration of Laser-Sail Propulsion from the Ground to Low Earth Orbit

    NASA Technical Reports Server (NTRS)

    Montgomery, Edward E., IV; Johnson, Les; Thomas, Herbert D.

    2016-01-01

    This paper adds to the body of research related to the concept of propellant-less in-space propulsion utilizing an external high energy laser (HEL) to provide momentum to an ultra-lightweight (gossamer) spacecraft. It has been suggested that the capabilities of Space Situational Awareness assets and the advanced analytical tools available for fine resolution orbit determination make it possible to investigate the practicalities of a ground to Low Earth Orbit (LEO) demonstration at delivered power levels that only illuminate a spacecraft without causing damage to it. The degree to which this can be expected to produce a measurable change in the orbit of a low ballistic coefficient spacecraft is investigated. Key system characteristics and estimated performance are derived for a near term mission opportunity involving the LightSail 2 spacecraft and laser power levels modest in comparison to those proposed previously by Forward, Landis, or Marx. [1,2,3] A more detailed investigation of accessing LightSail 2 from Santa Rosa Island on Eglin Air Force Base on the United States coast of the Gulf of Mexico is provided to show expected results in a specific case.

  17. Studies on rat and human thymus to demonstrate immunoreactivity of calcitonin gene-related peptide, tyrosine hydroxylase and neuropeptide Y

    PubMed Central

    KRANZ, ANDREA; KENDALL, MARION D.; VON GAUDECKER, BRITA

    1997-01-01

    The peptidergic and noradrenergic innervation of rat and human thymus was investigated by immunohistochemistry at the light and electron microscopical level (avidin-biotin-complex, sucrose-phosphate-glyoxylic-acid, and immunogold techniques). The distribution of noradrenergic neural profiles, and positive immunoreactivity for calcitonin gene-related peptide (CGRP), tyrosine hydroxylase (TH) and neuropeptide Y (NPY) is described in female rats during ageing, and in human children. In the neonatal rat thymus, the arteries and septa are well supplied by fine varicose nerves. In older animals (2 wk–1 y) the number of septa and blood vessels increase and consequently also the innervation. No nerves were found in the cortex. Apart from the innervation of the septal areas, immunoreactivity for CGRP and TH was present in thymic cells. Except for the young rats (neonatal–14 d), all rats showed CGRP positivity in subcapsular/perivascular epithelial cells (type 1 cells). All rat thymuses also contained a few TH positive cells in the medulla, which could only be confirmed as epithelial cells (type 6 cells) in children. Type 1 cells in the human thymus were not CGRP positive, but as in the rat, there were similar TH positive cells in the medulla. It was concluded that in addition to nerves containing CGRP, noradrenaline or dopamine, epithelial cells also contain these transmitters. They could therefore act on different cells (compared with neural targets) in a paracrine manner. PMID:9419001

  18. White tea as a promising antioxidant medium additive for sperm storage at room temperature: a comparative study with green tea.

    PubMed

    Dias, Tânia R; Alves, Marco G; Tomás, Gonçalo D; Socorro, Sílvia; Silva, Branca M; Oliveira, Pedro F

    2014-01-22

    Storage of sperm under refrigeration reduces its viability, due to oxidative unbalance. Unfermented teas present high levels of catechin derivatives, known to reduce oxidative stress. This study investigated the effect of white tea (WTEA) on epididymal spermatozoa survival at room temperature (RT), using green tea (GTEA) for comparative purposes. The chemical profiles of WTEA and GTEA aqueous extracts were evaluated by (1)H NMR. (-)-Epigallocatechin-3-gallate was the most abundant catechin, being twice as abundant in WTEA extract. The antioxidant power of storage media was evaluated. Spermatozoa antioxidant potential, lipid peroxidation, and viability were assessed. The media antioxidant potential increased the most with WTEA supplementation, which was concomitant with the highest increase in sperm antioxidant potential and lipid peroxidation decrease. WTEA supplementation restored spermatozoa viability to values similar to those obtained at collection time. These findings provide evidence that WTEA extract is an excellent media additive for RT sperm storage, to facilitate transport and avoid the deleterious effects of refrigeration.

  19. Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization

    NASA Astrophysics Data System (ADS)

    Yu, Binbin; Zeng, Zhong; Ren, Qinyu; Chen, Yang; Liang, Mei; Zou, Huawei

    2016-09-01

    A series of block type polycarboxylate-based superplasticizers (PCs) with different molecular architectures were synthesized with macromonomer butenyl alkylene polyoxyethylene-polyoxypropylene ether (BAPP) and acrylic acid (AA) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Fourier-Transformed Infrared (FTIR) Spectroscopy and dynamic light scattering (DLS) were applied to investigate the PCs' molecular structure. The dispersion capacity of the PCs in cement were also measured, and the results showed that the polycarboxylic dispersing agents prepared by this method were suitable for portlant cement. It was found that the PCs could affect the hydration process, which was performed through retarding the generation of ettringite in the hydrated product. Our studies with X-ray diffraction (XRD), scanning electron microscopy (SEM) and compressive strength measurement of hydrated production were all supporting this conclusion.

  20. Study on Antiwear and Repairing Performances about Mass of Nano-copper Lubricating Additives to 45 Steel

    NASA Astrophysics Data System (ADS)

    Wang, X. L.; Yin, Y. L.; Zhang, G. N.; Wang, W. Y.; Zhao, K. K.

    Nano-copper usually serve for lubricating additives in tribology field. The antiwear and reducing friction performances both basic lubrication oil and basic lubrication oil with nano-copper in different mass were tested by friction wear test machine. The morphologies and the main elements of worn surfaces were analyzed by SEM. The results indicated that nano-copper could improve tribology performances of basic lubrication oil. Comparing with base lubrication oil, the mass is 0.15% of nano-copper, the friction coefficient and the worn trace width can be reduced 34% and 32% respectively. Nano-copper can form self-repairing film in lubrication oil which availably separates the friction materials in friction process. Therefore, nano-copper has wonderful antiwear, reducing friction and self-repairing performances. And the function mechanism of Cu nanoparticles is studied in the paper.

  1. Linearity and additivity in cluster-induced sputtering: A molecular-dynamics study of van der Waals bonded systems

    SciTech Connect

    Anders, Christian; Urbassek, Herbert M.; Johnson, Robert E.

    2004-10-15

    Using molecular-dynamics simulation, we study sputtering of a condensed-gas solid induced by the impact of atomic clusters with sizes 1{<=}n{<=}10{sup 4}. Above a nonlinear onset regime, we find a linear increase of the sputter yield Y with the total energy E of the bombarding cluster. The fitting coefficients in the linear regime depend only on the cluster size n such that for fixed bombardment energy, sputtering decreases with increasing cluster size n. We find that to a good approximation the sputter yield in this regime obeys an additivity rule in cluster size n such that doubling the cluster size at the same cluster velocity amounts to doubling the sputter yield. The sputter-limiting energy {epsilon}{sub s} is introduced which separates erosion ({epsilon}>{epsilon}{sub s}) from growth ({epsilon}<{epsilon}{sub s}) under cluster impact.

  2. White tea as a promising antioxidant medium additive for sperm storage at room temperature: a comparative study with green tea.

    PubMed

    Dias, Tânia R; Alves, Marco G; Tomás, Gonçalo D; Socorro, Sílvia; Silva, Branca M; Oliveira, Pedro F

    2014-01-22

    Storage of sperm under refrigeration reduces its viability, due to oxidative unbalance. Unfermented teas present high levels of catechin derivatives, known to reduce oxidative stress. This study investigated the effect of white tea (WTEA) on epididymal spermatozoa survival at room temperature (RT), using green tea (GTEA) for comparative purposes. The chemical profiles of WTEA and GTEA aqueous extracts were evaluated by (1)H NMR. (-)-Epigallocatechin-3-gallate was the most abundant catechin, being twice as abundant in WTEA extract. The antioxidant power of storage media was evaluated. Spermatozoa antioxidant potential, lipid peroxidation, and viability were assessed. The media antioxidant potential increased the most with WTEA supplementation, which was concomitant with the highest increase in sperm antioxidant potential and lipid peroxidation decrease. WTEA supplementation restored spermatozoa viability to values similar to those obtained at collection time. These findings provide evidence that WTEA extract is an excellent media additive for RT sperm storage, to facilitate transport and avoid the deleterious effects of refrigeration. PMID:24372402

  3. Theoretical study of the hydroxyl radical addition to uracil and photochemistry of the formed U6OH• adduct.

    PubMed

    Francés-Monerris, Antonio; Merchán, Manuela; Roca-Sanjuán, Daniel

    2014-03-20

    Hydroxyl radical ((•)OH) is produced in biological systems by external or endogenous agents. It can damage DNA/RNA by attacking pyrimidine nucleobases through the addition to the C5═C6 double bond. The adduct resulting from the attachment at the C5 position prevails in the experimental measurements, although the reasons for this preference remain unclear. The first aim of this work is therefore to shed light on the comprehension of this important process. Thus, the thermal (•)OH addition to the C5═C6 double bond of uracil has been studied theoretically by using DFT, MP2, and the multiconfigurational CASPT2//CASSCF methodologies. The in-vacuo results obtained with the latter protocol plus the analysis of solvent effects support the experimental observation. A significant lower barrier height is predicted for the C5 pathway with respect to that of the C6 route. In contrast to the C5 adduct, the C6 adduct is able to absorb visible light. Hence, the second aim of the work is to study the photochemistry of this species using the CASPT2//CASSCF methodology within the framework of the photochemical reaction path approach (PRPA). The nonradiative decay to the ground state of this compound has been characterized. A photoreactive character is predicted for the C6 adduct in the excited states according to the presence of excited-state minima along the main decay channel. Finally, a new mechanism of photodissociation has been explored, which implies the photoinduced regeneration of the canonical nucleobase by irradiating with visible light, being therefore relevant in RNA protection against damage by reactive oxygen species.

  4. Origins of stereoselectivity in the Diels-Alder addition of chiral hydroxyalkyl vinyl ketones to cyclopentadiene: a quantitative computational study.

    PubMed

    Bakalova, Snezhana M; Kaneti, Jose

    2008-12-18

    Modest basis set level MP2/6-31G(d,p) calculations on the Diels-Alder addition of S-1-alkyl-1-hydroxy-but-3-en-2-ones (1-hydroxy-1-alkyl methyl vinyl ketones) to cyclopentadiene correctly reproduce the trends in known experimental endo/exo and diastereoface selectivity. B3LYP theoretical results at the same or significantly higher basis set level, on the other hand, do not satisfactorily model observed endo/exo selectivities and are thus unsuitable for quantitative studies. The same is valid also with regard to subtle effects originating from, for example, conformational distributions of reactants. The latter shortcomings are not alleviated by the fact that observed diastereoface selectivities are well-reproduced by DFT calculations. Quantitative computational studies of large cycloaddition systems would require higher basis sets and better account for electron correlation than MP2, such as, for example, CCSD. Presently, however, with 30 or more non-hydrogen atoms, these computations are hardly feasible. We present quantitatively correct stereochemical predictions using a hybrid layered ONIOM computational approach, including the chiral carbon atom and the intramolecular hydrogen bond into a higher level, MP2/6-311G(d,p) or CCSD/6-311G(d,p), layer. Significant computational economy is achieved by taking account of surrounding bulky (alkyl) residues at 6-31G(d) in a low HF theoretical level layer. We conclude that theoretical calculations based on explicit correlated MO treatment of the reaction site are sufficiently reliable for the prediction of both endo/exo and diastereoface selectivity of Diels-Alder addition reactions. This is in line with the understanding of endo/exo selectivity originating from dynamic electron correlation effects of interacting pi fragments and diastereofacial selectivity originating from steric interactions of fragments outside of the Diels-Alder reaction site. PMID:18637663

  5. A Long-Term Experimental Study Demonstrates the Costs of Begging That Were Not Found over the Short Term

    PubMed Central

    Soler, Manuel; Ruiz-Raya, Francisco; Carra, Laura G.; Medina-Molina, Eloy; Ibáñez-Álamo, Juan Diego; Martín-Gálvez, David

    2014-01-01

    Parent–offspring conflict theory predicts that begging behaviour could escalate continuously over evolutionary time if it is not prevented by costliness of begging displays. Three main potential physiological costs have been proposed: growth, immunological and metabolic costs. However, empirical evidence on this subject remains elusive because published results are often contradictory. In this study, we test for the existence of these three potential physiological costs of begging in house sparrow (Passer domesticus) nestlings by stimulating a group of nestlings to beg for longer and another group for shorter periods than in natural conditions. All nestlings were fed with the same quantity of food. Our study involves a long-term experimental treatment for begging studies (five consecutive days). Long-term studies frequently provide clearer results than short-term studies and, sometimes, relevant information not reported by the latter ones. Our long-term experiment shows (i) a clear effect on the immune response even since the first measurement (6 hours), but it was higher during the second (long-term) than during the first (short-term) test; (ii) evidence of a growth cost of begging in house sparrow nestlings not previously found by other studies; (iii) body condition was affected by our experimental manipulation only after 48 hour; (iv) a metabolic cost of begging never previously shown in any species, and (v) for the first time, it has shown a simultaneous effect of the three potential physiological costs of begging: immunocompetence, growth, and metabolism. This implies first, that a multilevel trade-off can occur between begging and all physiological costs and, second, that a lack of support in a short-term experiment for the existence of a tested cost of begging does not mean absence of that cost, because it can be found in a long-term experiment. PMID:25372280

  6. In situ electron microscopy studies of calcium carbonate precipitation from aqueous solution with and without organic additives.

    PubMed

    Verch, Andreas; Morrison, Ian E G; Locht, Renee van de; Kröger, Roland

    2013-08-01

    For the understanding of mineral formation processes from solution it is important to obtain a deeper insight into the dynamics of crystal growth. In this study we applied for this purpose a novel atmospheric scanning electron microscope that allows the investigation of CaCO3 particle formation in solution under atmospheric conditions with a resolution of approximately 10nm. Furthermore it permits the in situ observation of the dynamics of crystal evolution. With this tool the precipitation of CaCO3 was studied in the absence and presence of additives, namely poly(acrylic acid) and poly(styrene sulfonate-co-maleic acid) which are known to influence the crystal growth rate and morphology. We determined particle growth rates and investigated the formation and dissolution dynamics of an observed transient phase, believed to be amorphous calcium carbonate. This technique also enabled us to study the depletion zones, areas of lower intensity due to reduced ion concentrations. Ion flux rates were obtained from the depletion zone width, which amounted to several μm assuming the formation and dissolution dynamics of amorphous calcium carbonate being the rate determining process. This assumption was confirmed since the obtained fluxes were found to be in good agreement with fluxes derived from the experimentally observed crystal growth rates.

  7. Research and development study for optimization of beryllium production operations. Task II report. Volume 1. Recommendations for subscale demonstration models

    SciTech Connect

    Zuehlke, J.R.

    1983-04-01

    The eleven evaluation reports in this Task II, Volume 1 report, are the results of a comprehensive literature search and study of new concepts or alternatives for beryllium metal production, currently available in industry today. Modifications to the current beryllium metal production process were also studied. Three processes were selected for in-depth evaluation and comparison to the current process with proposed improvements: sodium reduction of beryllium chloride to produce metallic beryllium; modified Hall process for beryllium flake; and electrowinning of beryllium chloride to produce metallic beryllium.

  8. Overhead Projector Demonstrations.

    ERIC Educational Resources Information Center

    Kolb, Doris, Ed.

    1989-01-01

    Described are three chemistry demonstrations: (1) a simple qualitative technique for taste pattern recognition in structure-activity relationships; (2) a microscale study of gaseous diffusion using bleach, HCl, ammonia, and phenolphthalein; and (3) the rotation of polarized light by stereoisomers of limonene. (MVL)

  9. Overhead Projector Demonstrations.

    ERIC Educational Resources Information Center

    Kolb, Doris, Ed.

    1989-01-01

    Presents two demonstrations using the overhead projector: (1) describes how to build a projecting voltmeter and presents uses for the classroom; and (2) investigates the color of fluorescent solutions by studying the absorption and transmission of light through the solutions. (MVL)

  10. Molecular modeling studies demonstrate key mutations that could affect the ligand recognition by influenza AH1N1 neuraminidase.

    PubMed

    Ramírez-Salinas, Gema L; García-Machorro, J; Quiliano, Miguel; Zimic, Mirko; Briz, Verónica; Rojas-Hernández, Saul; Correa-Basurto, J

    2015-11-01

    The goal of this study was to identify neuraminidase (NA) residue mutants from human influenza AH1N1 using sequences from 1918 to 2012. Multiple alignment studies of complete NA sequences (5732) were performed. Subsequently, the crystallographic structure of the 1918 influenza (PDB ID: 3BEQ-A) was used as a wild-type structure and three-dimensional (3-D) template for homology modeling of the mutated selected NA sequences. The 3-D mutated NAs were refined using molecular dynamics (MD) simulations (50 ns). The refined 3-D models were used to perform docking studies using oseltamivir. Multiple sequence alignment studies showed seven representative mutations (A232V, K262R, V263I, T264V, S367L, S369N, and S369K). MD simulations applied to 3-D NAs showed that each NA had different active-site shapes according to structural surface visualization and docking results. Moreover, Cartesian principal component analyses (cPCA) show structural differences among these NA structures caused by mutations. These theoretical results suggest that the selected mutations that are located outside of the active site of NA could affect oseltamivir recognition and could be associated with resistance to oseltamivir.

  11. Molecular modeling studies demonstrate key mutations that could affect the ligand recognition by influenza AH1N1 neuraminidase.

    PubMed

    Ramírez-Salinas, Gema L; García-Machorro, J; Quiliano, Miguel; Zimic, Mirko; Briz, Verónica; Rojas-Hernández, Saul; Correa-Basurto, J

    2015-11-01

    The goal of this study was to identify neuraminidase (NA) residue mutants from human influenza AH1N1 using sequences from 1918 to 2012. Multiple alignment studies of complete NA sequences (5732) were performed. Subsequently, the crystallographic structure of the 1918 influenza (PDB ID: 3BEQ-A) was used as a wild-type structure and three-dimensional (3-D) template for homology modeling of the mutated selected NA sequences. The 3-D mutated NAs were refined using molecular dynamics (MD) simulations (50 ns). The refined 3-D models were used to perform docking studies using oseltamivir. Multiple sequence alignment studies showed seven representative mutations (A232V, K262R, V263I, T264V, S367L, S369N, and S369K). MD simulations applied to 3-D NAs showed that each NA had different active-site shapes according to structural surface visualization and docking results. Moreover, Cartesian principal component analyses (cPCA) show structural differences among these NA structures caused by mutations. These theoretical results suggest that the selected mutations that are located outside of the active site of NA could affect oseltamivir recognition and could be associated with resistance to oseltamivir. PMID:26499499

  12. A Comparative Study of Competency-Based Courses Demonstrating a Potential Measure of Course Quality and Student Success

    ERIC Educational Resources Information Center

    Krause, Jackie; Dias, Laura Portolese; Schedler, Chris

    2015-01-01

    While competency-based education is growing, standardized tools for evaluating the unique characteristics of course design in this domain are still under development. This preliminary research study evaluated the effectiveness of a rubric developed for assessing course design of competency-based courses in an undergraduate Information Technology…

  13. A CASE STUDY DEMONSTRATING GUIDANCE FOR EVALUATING LANDFILL GAS EMISSIONS FROM CLOSED OR ABANDONED FACILITIES--SOUTH KINGSTOWN, RHODE ISLAND

    EPA Science Inventory

    The report describes a case study that applies EPA/600/R-05/123a, the guidance for conducting air pathway analyses of landfill gas emissions that are of interest to superfund remedial project managers, on-scene coordinators, facility owners, and potentially responsible parties. T...

  14. A prospective study validating a clinical scoring system and demonstrating phenotypical-genotypical correlations in Silver-Russell syndrome

    PubMed Central

    Azzi, Salah; Salem, Jennifer; Thibaud, Nathalie; Chantot-Bastaraud, Sandra; Lieber, Eli; Netchine, Irène; Harbison, Madeleine D

    2015-01-01

    Background Multiple clinical scoring systems have been proposed for Silver-Russell syndrome (SRS). Here we aimed to test a clinical scoring system for SRS and to analyse the correlation between (epi)genotype and phenotype. Subjects and methods Sixty-nine patients were examined by two physicians. Clinical scores were generated for all patients, with a new, six-item scoring system: (1) small for gestational age, birth length and/or weight ≤−2SDS, (2) postnatal growth retardation (height ≤−2SDS), (3) relative macrocephaly at birth, (4) body asymmetry, (5) feeding difficulties and/or body mass index (BMI) ≤−2SDS in toddlers; (6) protruding forehead at the age of 1–3 years. Subjects were considered to have likely SRS if they met at least four of these six criteria. Molecular investigations were performed blind to the clinical data. Results The 69 patients were classified into two groups (Likely-SRS (n=60), Unlikely-SRS (n=9)). Forty-six Likely-SRS patients (76.7%) displayed either 11p15 ICR1 hypomethylation (n=35; 58.3%) or maternal UPD of chromosome 7 (mUPD7) (n=11; 18.3%). Eight Unlikely-SRS patients had neither ICR1 hypomethylation nor mUPD7, whereas one patient had mUPD7. The clinical score and molecular results yielded four groups that differed significantly overall and for individual scoring system factors. Further molecular screening led identifying chromosomal abnormalities in Likely-SRS-double-negative and Unlikely-SRS groups. Four Likely-SRS-double negative patients carried a DLK1/GTL2 IG-DMR hypomethylation, a mUPD16; a mUPD20 and a de novo 1q21 microdeletion. Conclusions This new scoring system is very sensitive (98%) for the detection of patients with SRS with demonstrated molecular abnormalities. Given its clinical and molecular heterogeneity, SRS could be considered as a spectrum. PMID:25951829

  15. Nurses' Health Study: demonstrating the impact of research, and adapting new measures and approaches to increase relevance and effect of cohort studies.

    PubMed

    Colditz, Graham A

    2016-01-01

    The Nurses' Health Study, a cohort of 121 701 female registered nurses, was established in 1976 to prospectively address the relationship between the use of oral contraceptives and the risk of breast cancer. Through follow-up questionnaires every 2 years, exposures have been updated and new exposure assessments added. Repeated measures have allowed a broad range of analyses, including change measures and risk according to time since exposure. Responding to emerging public health issues and accessing new measures (such as exposure to silicone implants, air pollution and the built environment) has allowed investigators to address an evolving spectrum of topics. Prospective data on a wide range of chronic conditions have allowed assessment of preventable fractions of diseases, development of risk prediction models, and other applications that bring data to bear on translation of epidemiologic findings to health policy and practice. The aim of this report is to highlight the features of the Nurses' Health Study and other cohorts that demonstrate continuing contributions to the changing epidemiology of chronic conditions. PMID:27421340

  16. Buried Waste Integrated Demonstration lessons learned: 1993 technology demonstrations

    SciTech Connect

    Kostelnik, K.M.; Owens, K.J.

    1994-12-31

    An integrated technology demonstration was conducted by the Buried Waste Integrated Demonstration (BWID) at the Idaho National Engineering Laboratory Cold Test Pit in the summer of 1993. This program and demonstration was sponsored by the US Department of Energy Office of Technology Development. The demonstration included six technologies representing a synergistic system for the characterization and retrieval of a buried hazardous waste site. The integrated technology demonstration proved very successful and a summary of the technical accomplishments is presented. Upon completion of the integrated technology demonstration, cognizant program personnel participated in a lessons learned exercise. This exercise was conducted at the Simplot Decision Support Center at Idaho State University and lessons learned activity captured additional information relative to the integration of technologies for demonstration purposes. This information will be used by BWID to enhance program planning and strengthen future technology demonstrations.

  17. Oxidative addition of halogens to homoleptic perfluoromethyl or perfluorophenyl derivatives of platinum(II): a comparative study.

    PubMed

    Menjón, Babil; Martínez-Salvador, Sonia; Gómez-Saso, Miguel A; Forniés, Juan; Falvello, Larry R; Martín, Antonio; Tsipis, Athanassios

    2009-06-22

    Chlorocarbon solvents (solv=CH(2)Cl(2), CHCl(3)) are suggested to play an active role in the oxidative addition of halogens, X(2) (X=Cl, Br, I), to homoleptic d(8) perfluoromethyl and -phenyl platinum(II) species [Pt(R(F))(4)](2-) (R(F)=CF(3), C(6)F(5)). The perfluoromethyl group, CF(3), has been found to be considerably less prone to undergo reductive elimination processes, and is, therefore, more suitable for stabilizing organoplatinum(IV) derivatives (see scheme).The equilibrium geometries of the homoleptic perfluorinated organoplatinate(II) anions [Pt(CF(3))(4)](2-) and [Pt(C(6)F(5))(4)](2-) have been computed at the B3P86/LANL2DZ level of theory. Remarkably good agreement with the experimentally determined structures has been obtained by X-ray diffraction methods. The reactivity of [NBu(4)](2)[Pt(CF(3))(4)] (1) towards halogens (Cl(2), Br(2), and I(2)) has been investigated by using a combined experimental and theoretical approach. The perfluoromethyl derivative 1 has been found to undergo clean oxidative addition of the three halogens under investigation, giving rise to [NBu(4)](2)[trans-Pt(CF(3))(4)X(2)] (X=Cl (7), Br (10), I (13)) in a quantitative and stereoselective way. In the low-temperature reaction of the perfluorophenyl derivative [NBu(4)](2)[Pt(C(6)F(5))(4)] (3) with Cl(2) or Br(2), the corresponding oxidative-addition products [NBu(4)](2)[trans-Pt(C(6)F(5))(4)X(2)] (X=Cl (14), Br (15)) can also be obtained. In the case in which X=Br and working in CHCl(3) at -55 degrees C, it has been possible to detect the formation of an intermediate species to which we assign the formula [trans-Pt(C(6)F(5))(4)Br(ClCHCl(2))](-) (16). The solvento complex 16 is thermally unstable and prone to undergo reductive elimination of C(6)F(5)--C(6)F(5). In the presence of PhCN, complex [NBu(4)][trans-Pt(C(6)F(5))(4)Br(NCPh)] (17) was isolated and structurally characterized. The reaction of 3 with I(2) gave no organoplatinum(IV) compound. Our comparative study reveals that

  18. Additions and corrections to the bibliography of geologic studies, Columbia Plateau (Columbia River Besalt) and adjacent Areas, in Idaho, 1980

    SciTech Connect

    Strowd, W.

    1980-01-01

    This bibliography is an update to Idaho Bureau of Mines and Geology Open-File Report 78-6, Bibliography of Geological Studies, Columbia Plateau (Columbia River Basalt Group) and adjacent areas in Idaho (also known as Rockwell Hanford Operations' contractor report RHO-BWI-C-44). To keep the original document current, this additions and corrections report was prepared for the Basalt Waste Isolation Project of Rockwell Hanford Operations. This update is supplementary; therefore, references cited in the original document have not been included here. What is included are materials that have become available since the original publication and pertinent literature that had originally been overlooked. Accompany this updated bubliography are index maps that show locations of geologic studies and geochemical petrographic, remanent paleomagnetic, and radiometric age-dated sites within the Columbia River Basalt Group field within Idaho; also identified are archeological sites, test wells, mines, quarries, and other types of excavations. References on the index maps are keyed to the bibliography and cover the Spokane, Pullman, Hamilton, Grangeville, Elk City, Baker, Boise, and Jordan Valley Army Map Service two-degree quadrangles.

  19. Spectroscopic studies of In2O3 nanostructures; photovoltaic demonstration of In2O3/p-Si heterojunction.

    PubMed

    Bhat, Thirumaleshwara N; Roul, Basanta; Rajpalke, Mohana K; Kumar, Mahesh; Krupanidhi, S B

    2013-01-01

    The thermal oxidation process of the indium nitride (InN) nanorods (NRs) was studied. The SEM studies reveal that the cracked and burst mechanism for the formation of indium oxide (In2O3) nanostructures by oxidizing the InN NRs at higher temperatures. XRD results confirm the bcc crystal structure of the as prepared In2O3 nanostructures. Strong and broad photoluminescence spectrum located at the green to red region with maximum intensity at 566 nm along with a weak ultraviolet emission at 338 nm were observed due to oxygen vacancy levels and free excitonic transitions, respectively. The valence band onset energy of 2.1 eV was observed from the XPS valence band spectrum, clearly justifies the alignment of Fermi level to the donor level created due to the presence of oxygen vacancies which were observed in the PL spectrum. The elemental ratio In:O in as prepared In2O3 was found to be 42:58 which is in close agreement with the stoichiometric value of 40:60. A downward shift was observed in the Raman peak positions due to a possible phonon confinement effect in the nanoparticles formed in bursting mechanism. Such single junction devices exhibit promising photovoltaic performance with fill factor and conversion efficiency of 21% and 0.2%, respectively, under concentrated AM1.5 illumination.

  20. A Classroom Demonstration of Wireless Energy Transfer

    ERIC Educational Resources Information Center

    Luczak, Matthew; Baker, Blane

    2010-01-01

    Resonance is one of the recurring themes in physics and, as such, is important in research applications and in explaining many everyday phenomena. Students often encounter resonance during studies of simple harmonic motion, sound, mechanical waves and AC circuits. Alternatively, or in addition, resonance can be demonstrated in the context of…

  1. A case study of bats and white-nose syndrome demonstrating how to model population viability with evolutionary effects.

    PubMed

    Maslo, Brooke; Fefferman, Nina H

    2015-08-01

    Ecological factors generally affect population viability on rapid time scales. Traditional population viability analyses (PVA) therefore focus on alleviating ecological pressures, discounting potential evolutionary impacts on individual phenotypes. Recent studies of evolutionary rescue (ER) focus on cases in which severe, environmentally induced population bottlenecks trigger a rapid evolutionary response that can potentially reverse demographic threats. ER models have focused on shifting genetics and resulting population recovery, but no one has explored how to incorporate those findings into PVA. We integrated ER into PVA to identify the critical decision interval for evolutionary rescue (DIER) under which targeted conservation action should be applied to buffer populations undergoing ER against extinction from stochastic events and to determine the most appropriate vital rate to target to promote population recovery. We applied this model to little brown bats (Myotis lucifugus) affected by white-nose syndrome (WNS), a fungal disease causing massive declines in several North American bat populations. Under the ER scenario, the model predicted that the DIER period for little brown bats was within 11 years of initial WNS emergence, after which they stabilized at a positive growth rate (λ = 1.05). By comparing our model results with population trajectories of multiple infected hibernacula across the WNS range, we concluded that ER is a potential explanation of observed little brown bat population trajectories across multiple hibernacula within the affected range. Our approach provides a tool that can be used by all managers to provide testable hypotheses regarding the occurrence of ER in declining populations, suggest empirical studies to better parameterize the population genetics and conservation-relevant vital rates, and identify the DIER period during which management strategies will be most effective for species conservation.

  2. A case study of bats and white-nose syndrome demonstrating how to model population viability with evolutionary effects.

    PubMed

    Maslo, Brooke; Fefferman, Nina H

    2015-08-01

    Ecological factors generally affect population viability on rapid time scales. Traditional population viability analyses (PVA) therefore focus on alleviating ecological pressures, discounting potential evolutionary impacts on individual phenotypes. Recent studies of evolutionary rescue (ER) focus on cases in which severe, environmentally induced population bottlenecks trigger a rapid evolutionary response that can potentially reverse demographic threats. ER models have focused on shifting genetics and resulting population recovery, but no one has explored how to incorporate those findings into PVA. We integrated ER into PVA to identify the critical decision interval for evolutionary rescue (DIER) under which targeted conservation action should be applied to buffer populations undergoing ER against extinction from stochastic events and to determine the most appropriate vital rate to target to promote population recovery. We applied this model to little brown bats (Myotis lucifugus) affected by white-nose syndrome (WNS), a fungal disease causing massive declines in several North American bat populations. Under the ER scenario, the model predicted that the DIER period for little brown bats was within 11 years of initial WNS emergence, after which they stabilized at a positive growth rate (λ = 1.05). By comparing our model results with population trajectories of multiple infected hibernacula across the WNS range, we concluded that ER is a potential explanation of observed little brown bat population trajectories across multiple hibernacula within the affected range. Our approach provides a tool that can be used by all managers to provide testable hypotheses regarding the occurrence of ER in declining populations, suggest empirical studies to better parameterize the population genetics and conservation-relevant vital rates, and identify the DIER period during which management strategies will be most effective for species conservation. PMID:25808080

  3. Young male soccer players exhibit additional bone mineral acquisition during the peripubertal period: 1-year longitudinal study.

    PubMed

    Zouch, Mohamed; Vico, Laurence; Frere, Delphine; Tabka, Zouhair; Alexandre, Christian

    2014-01-01

    The aim of this study was to determine whether soccer could have different bone benefits in prepubescent and pubescent boys. We investigated 76 boys aged 10 to 13 years during a 1-year study. All boys were prepubescent at the beginning of the study (T0); pubescent status was determined by a complete 24-h urine hormonal assay of FSH-LH, with LH ≤ 0.31 IU/24 h and FSH ≤ 2.19 IU/24 h corresponding to prepubescent Tanner stage I and with 0.31 < LH < 0.95 IU/24 h and 1.57 < FSH < 3.77 IU/24 h corresponding to pubescent Tanner stage II. At the end of the study (T1), 35 boys remained prepubescent (22 soccer players (F1) and 13 controls (C1)), and 41 boys had entered puberty (26 soccer players (F2) and 15 controls (C2)). Soccer players completed 2 to 5 h of training plus one competition game per week during the school year, and controls only had physical education at school. Bone mineral content (BMC) was measured at T0 and T1 by DPX in the lumbar spine, total hip, and whole body (WB) for a comparison between soccer players and controls. At T0, no BMC difference was found between F1 and C1, but BMC was higher in F2 than C2 in WB and weight-bearing sites. At T1, BMC was higher in WB and weight-bearing sites in both F1 and F2 compared to their respective controls. Between T0 and T1, soccer induced a BMC gain at weight-bearing sites in both F1 and F2 compared to C1 and C2, respectively. The soccer-related bone gain was greater in WB and weight-bearing (the lumbar spine, total hip, and supporting leg) and non-weight-bearing bones (dominant arm and nondominant arm) in boys who became pubescent than in boys who remained prepubescent. In conclusion, 1-year study in young male soccer players demonstrates that the process of bone accretion at the very early phase of puberty is more intensely stimulated by the combination of physical exercise and sexual impregnation than by one of these factors alone.

  4. Prospective demonstration of brain plasticity after intensive abacus-based mental calculation training: An fMRI study

    NASA Astrophysics Data System (ADS)

    Chen, C. L.; Wu, T. H.; Cheng, M. C.; Huang, Y. H.; Sheu, C. Y.; Hsieh, J. C.; Lee, J. S.

    2006-12-01

    Abacus-based mental calculation is a unique Chinese culture. The abacus experts can perform complex computations mentally with exceptionally fast speed and high accuracy. However, the neural bases of computation processing are not yet clearly known. This study used a BOLD contrast 3T fMRI system to explore the brain activation differences between abacus experts and non-expert subjects. All the acquired data were analyzed using SPM99 software. From the results, different ways of performing calculations between the two groups were seen. The experts tended to adopt efficient visuospatial/visuomotor strategy (bilateral parietal/frontal network) to process and retrieve all the intermediate and final results on the virtual abacus during calculation. By contrast, coordination of several networks (verbal, visuospatial processing and executive function) was required in the normal group to carry out arithmetic operations. Furthermore, more involvement of the visuomotor imagery processing (right dorsal premotor area) for imagining bead manipulation and low level use of the executive function (frontal-subcortical area) for launching the relatively time-consuming sequentially organized process was noted in the abacus expert group than in the non-expert group. We suggest that these findings may explain why abacus experts can reveal the exceptional computational skills compared to non-experts after intensive training.

  5. Preconceptual design study for solidifying high-level waste: Appendices A, B and C West Valley Demonstration Project

    SciTech Connect

    Hill, O.F.

    1981-04-01

    This report presents a preconceptual design study for processing radioactive high-level liquid waste presently stored in underground tanks at Western New York Nuclear Service Center (WNYNSC) near West Valley, New York, and for incorporating the radionculides in that waste into a solid. The high-level liquid waste accumulated from the operation of a chemical reprocessing plant by the Nuclear Fuel Services, Inc. from 1966 to 1972. The high-level liquid waste consists of approximately 560,000 gallons of alkaline waste from Purex process operations and 12,000 gallons of acidic (nitric acid) waste from one campaign of processing thoria fuels by a modified Thorex process (during this campaign thorium was left in the waste). The alkaline waste contains approximately 30 million curies and the acidic waste contains approximately 2.5 million curies. The reference process described in this report is concerned only with chemically processing the high-level liquid waste to remove radionuclides from the alkaline supernate and converting the radionuclide-containing nonsalt components in the waste into a borosilicate glass.

  6. Demonstrating the benefits and pitfalls of various acidity characterization techniques by a case study on bimodal aluminosilicates.

    PubMed

    Van Oers, Cynthia J; Góra-Marek, Kinga; Prelot, Bénédicte; Datka, Jerzy; Meynen, Vera; Cool, Pegie

    2014-02-25

    A new combination of a volumetric with a dynamic method to investigate the acidity properties of aluminosilicates is introduced. In the first step, the total acidity is determined volumetrically by the measurement of two-cycle adsorption (TCA) isotherms with ammonia as a probe, directly followed by a dynamic temperature-programmed desorption (TPD) experiment to define the acid strength distribution. Furthermore, the results obtained by the new direct combination of TCA and TPD are validated by comparison with an in-situ FTIR (Fourier transform infrared) study with the same probe molecule on the same materials. Both acidity characterization techniques are compared, and we comment on their complementarity, benefits, and pitfalls. The material under investigation is a new type of bimodal microporous and mesoporous material with zeolitic characteristics, synthesized by a mesotemplate-free method. The acidic nature of the novel material is compared to two reference materials: a crystalline zeolite and a mesoporous aluminum incorporated mesocellular foam (Al-MCF) with amorphous characteristics.

  7. The Effect of a Structural Intervention for Syphilis Control Among 3597 Female Sex Workers: A Demonstration Study in South China

    PubMed Central

    Wang, Baoxi; Wang, Qian-Qiu; Yin, Yue-Ping; Liang, Guo-Jun; Jiang, Ning; Gong, Xiang-Dong; Yang, Bin; Zhou, Yue-Jiao; Liu, Qiao; Huan, Xi-Ping; Yang, Li-Gang; Tan, Guang-Jie; Pei, Dong-Nu; Tucker, Joseph D.; Chen, Xiang-Sheng

    2012-01-01

    Background. Syphilis has made a rapid resurgence in China, especially among high-risk groups including female sex workers (FSWs). Methods. Two cities in each of 3 provinces in South China were chosen and allocated to intervention or control arms. The intervention consisted of enhancing community-based syphilis screening outreach intervention with comprehensive sexually transmitted infection services at designated clinics while the control maintained routine intervention activities. Generalized linear modeling was used to examine effect of the intervention on incident syphilis infection. Results. A total of 8275 women were eligible, and 3597 women enrolled (n = 2011 in control arm, n = 1586 in intervention arm) in the study. The median follow-up duration was 375 days (interquartile range, 267–475). Syphilis incidence density in the intervention group was reduced by 70% (95% confidence interval, 53%–81%) compared with the incidence in the control arm. The syphilis prevention intervention benefits were robust among FSWs at low-tier venues, individuals with less than high school education, migrants, and women who did not report condom use during the last episode of sex. Conclusions. Integrated sexually transmitted infection and human immunodeficiency virus prevention strategies substantially reduce syphilis incidence among FSWs, especially among those at low-tier venues. This intervention suggests the need for scaling up comprehensive FSW programs in China. PMID:22807520

  8. [The incidence of arrhythmias in young persons without demonstrable heart disease: a 24-hour Holter study in 100 medical students].

    PubMed

    Berrazueta, J R; Poveda, J J; Puebla, F; Salas, E; Ochoteco, A; Gutiérrez, N

    1993-03-01

    A Holter monitorization study was performed in 100 voluntary university students (64 men and 36 women). The mean age was 23.6 years and organic heart disease was ruled out in all cases. Data were analysed in different subgroups including the practice of physical activity and subjects smokers or alcohol consumers. The maximum heart rate (HR) achieved during the wake period was 138.3 +/- 20.43 beat/m. Minimum daytime heart rate was 61.42 +/- 10.32 beat/m and it was below 60 beat/m in 41 subjects. During the nighttime period, the maximum heart rate achieved by the group was 89.34 +/- 11.31 beat/m. Minimum nighttime heart rate was 45.82 +/- 6.35 beat/m. Maximum heart rate in men was 134.3 +/- 21.35 beat/m, while in women was 145.42 +/- 16.36 beat/m. Eighty students presented one or more arrhythmias, among them 28 women and 52 men (p = NS): 92% in sportsmen and women groups as compared with 79% in the non sports practicers, 90% of alcohol consumers and 82% between subjects who smoked and drank, compared with 63% in the non drinkers (p < 0.006). 48% of the subjects presented one or more supraventricular arrhythmias during the daytime or during the nighttime (p = NS). Ventricular rhythm disturbances were found in 20 subjects. There was only one case who had a non sustained ventricular tachycardia of 4 complexes. These disturbances were not increased by practising sport nor by toxic habits. In 15 cases we found sinoatrial block, with a male predominance. Five subjects presented some type of atrioventricular block, 4 of which were alcohol and tobacco consumers.(ABSTRACT TRUNCATED AT 250 WORDS)

  9. An intervention study demonstrates effects of MC4R genotype on boar taint and performances of growing-finishing pigs.

    PubMed

    Van den Broeke, A; Aluwé, M; Tuyttens, F A M; Ampe, B; Vanhaecke, L; Wauters, J; Janssens, S; Coussé, A; Buys, N; Millet, S

    2015-03-01

    The Asp298Asn polymorphism of the melanocortin-4 receptor (MC4R) in pigs is known to affect economically important traits such as growth rate and backfat thickness. We have assessed the possible use of this polymorphism as a molecular marker to perform genetic selection toward lower boar taint levels without compromising growth performance and carcass and meat quality in commercial boars and gilts. Homozygous boars and gilts of the AA genotype and GG genotype were compared in an intervention study with a 2 × 2 design to assess main effects and possible interactions between sex and genotype. The concentrations of the 3 boar taint compounds androstenone ( = 0.044), skatole ( = 0.049), and indole ( = 0.006) were significantly higher in fat of AA boars compared to GG boars. However, no effect on the sensory analysis of the fat samples could be observed. Between 20 and 115 kg BW, AA pigs showed higher ADFI than GG pigs ( < 0.001). An interaction between genotype and sex was observed for ADG ( = 0.044): AA boars had a significantly higher ADG than GG boars but there was no significant difference between the gilts. Daily lean meat gain tended to be higher in boars compared to gilts ( = 0.051), independent of genotype. Similarly, boars showed higher G:F compared to gilts ( < 0.001), without effect of genotype. Genotype and sex affected several carcass quality parameters but there was no interaction. Pigs of the AA genotype displayed a lower dressing percentage ( = 0.005), lower ham width ( = 0.024), lower muscle thickness ( = 0.011), and higher fat thickness ( < 0.001), resulting in a lower lean meat percentage ( < 0.001) in comparison with GG pigs. Gilts had a significantly higher dressing percentage ( < 0.001), higher muscle thickness ( < 0.001), higher ham width ( < 0.001), and lower ham angle ( < 0.001) compared to boars. Other than the boar taint compounds, meat quality was not affected by genotype. Pork of gilts was darker ( = 0.014) and less exudative during

  10. Additive technology of soluble mold tooling for embedded devices in composite structures: A study on manufactured tolerances

    NASA Astrophysics Data System (ADS)

    Roy, Madhuparna

    Composite textiles have found widespread use and advantages in various industries and applications. The constant demand for high quality products and services requires companies to minimize their manufacturing costs, and delivery time in order to compete in general and niche marketplaces. Advanced manufacturing methods aim to provide economical methods of mold production. Creation of molding and tooling options for advanced composites encompasses a large portion of the fabrication time, making it a costly process and restraining factor. This research discusses a preliminary investigation into the use of soluble polymer compounds and additive manufacturing to fabricate soluble molds. These molds suffer from dimensional errors due to several factors, which have also been characterized. The basic soluble mold of a composite is 3D printed to meet the desired dimensions and geometry of holistic structures or spliced components. The time taken to dissolve the mold depends on the rate of agitation of the solvent. This process is steered towards enabling the implantation of optoelectronic devices within the composite to provide sensing capability for structural health monitoring. The shape deviation of the 3D printed mold is also studied and compared to its original dimensions to optimize the dimensional quality to produce dimensionally accurate parts. Mechanical tests were performed on compact tension (CT) resin samples prepared from these 3D printed molds and revealed crack propagation towards an embedded intact optical fiber.

  11. Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles: wettability and surface morphology study

    NASA Astrophysics Data System (ADS)

    Chudinova, E.; Surmeneva, M.; Koptioug, A.; Sharonova, A.; Loza, K.; Surmenev, R.

    2016-02-01

    In this work, the use of electrophoretic deposition to modify the surface of Ti6Al4V alloy fabricated via additive manufacturing technology is reported. Poly(vinylpyrrolidone) (PVP)-stabilized silver nanoparticles (AgNPs) had a spherical shape with a diameter of the metallic core of 100±20 nm and ζ -potential -15 mV. The AgNPs- coated Ti6Al4V alloy was studied in respect with its chemical composition and surface morphology, water contact angle, hysteresis, and surface free energy. The results of SEM microphotography analysis showed that the AgNPs were homogeneously distributed over the surface. Hysteresis and water contact angle measurements revealed the effect of the deposited AgNPs layer, namely an increased water contact angle and decreased contact angle hysteresis. However, the average water contact angle was 125° for PVP-stabilized-AgNPs-coated surface, whereas ethylene glycol gave the average contact angle of 17°. A higher surface energy is observed for AgNPs-coated Ti6Al4V surface (70.17 mN/m) compared with the uncoated surface (49.07 mN/m).

  12. Pilot study on the additive effects of berberine and oral type 2 diabetes agents for patients with suboptimal glycemic control

    PubMed Central

    Di Pierro, Francesco; Villanova, Nicola; Agostini, Federica; Marzocchi, Rebecca; Soverini, Valentina; Marchesini, Giulio

    2012-01-01

    Background Suboptimal glycemic control is a common situation in diabetes, regardless of the wide range of drugs available to reach glycemic targets. Basic research in diabetes is endeavoring to identify new actives working as insulin savers, use of which could delay the introduction of injectable insulin or reduce the insulin dose needed. Commonly available as a nutraceutical, berberine is a potential candidate. Methods and results Because its low oral bioavailability can be overcome by P-glycoprotein inhibitors like herbal polyphenols, we have tested the nutraceutical combination of Berberis aristata extract and Silybum marianum extract (Berberol®) in type 2 diabetes in terms of its additive effect when combined with a conventional oral regimen for patients with suboptimal glycemic control. After 90 days of treatment, the nutraceutical association had a positive effect on glycemic and lipid parameters, significantly reducing glycosylated hemoglobin, basal insulin, homeostatic model assessment of insulin resistance, total and low-density lipoprotein cholesterol, and triglycerides. A relevant effect was also observed in terms of liver function by measuring aspartate transaminase and alanine transaminase. The product had a good safety profile, with distinctive gastrointestinal side effects likely due to its acarbose-like action. Conclusion Although further studies should be carried out to confirm our data, Berberol could be considered a good candidate as an adjunctive treatment option in diabetes, especially in patients with suboptimal glycemic control. PMID:22924000

  13. Study of stability and thermodynamic properties of water-in-diesel nanoemulsion fuels with nano-Al additive

    NASA Astrophysics Data System (ADS)

    Mehta, Rakhi N.; More, Utkarsh; Malek, Naved; Chakraborty, Mousumi; Parikh, Parimal A.

    2015-11-01

    The present work addresses the formation of water-in-diesel (W/D) nanoemulsion by blending different percentages of water along with nano-Al additive in various propositions to enhance the combustion characteristics. The roles of various surfactants such as Sorbitan monooleate (Span 80), Triton X-100, Tetradecyltrimethylammonium bromide, and newly synthesized and characterized dicationic surfactants were discussed based upon their ability to stabilize the nanoemulsions. Surface active properties of the surfactants were determined by measuring their interfacial tension and subsequently by measuring the critical micelle concentration of the surfactants. Triton X-100 was found to be the most efficient surfactant for the current water-in-diesel nanoemulsion as it stabilized the suspensions for more than 8 h. Particle size analysis proved emulsion size to be in the order of nanometer, and zeta potential values were found to have neutral behavior at water-diesel interface. Experimental studies confirmed that that blends W/D [1 % (vol.) water] and W/DA [1 % (vol.) water, 0.1 % (wt.) nano-Al] were thermodynamically stable.

  14. A five-year study of the impact of nitrogen addition on methane uptake in alpine grassland.

    PubMed

    Yue, Ping; Li, Kaihui; Gong, Yanming; Hu, Yukun; Mohammat, Anwar; Christie, Peter; Liu, Xuejun

    2016-01-01

    It remains unclear how nitrogen (N) deposition affects soil methane (CH4) uptake in semiarid and arid zones. An in situ field experiment was conducted from 2010 to 2014 to systematically study the effect of various N application rates (0, 10, 30, and 90 kg N ha(-1) yr(-1)) on CH4 flux in alpine grassland in the Tianshan Mountains. No significant influence of N addition on CH4 uptake was found. Initially the CH4 uptake rate increased with increasing N application rate by up to 11.5% in 2011 and then there was gradual inhibition by 2014. However, the between-year variability in CH4 uptake was very highly significant with average uptake ranging from 52.9 to 106.6 μg C m(-2) h(-1) and the rate depended largely on seasonal variability in precipitation and temperature. CH4 uptake was positively correlated with soil temperature, air temperature and to a lesser extent with precipitation, and was negatively correlated with soil moisture and NO3(-)-N content. The results indicate that between-year variability in CH4 uptake was impacted by precipitation and temperature and was not sensitive to elevated N deposition in alpine grassland. PMID:27571892

  15. Small angle neutron scattering study of sodium dodecyl sulfate micellar growth driven by addition of a hydrotropic salt.

    PubMed

    Hassan, P A; Fritz, Gerhard; Kaler, Eric W

    2003-01-01

    The structures of aggregates formed in aqueous solutions of an anionic surfactant, sodium dodecyl sulfate (SDS), with the addition of a cationic hydrotropic salt, p-toluidine hydrochloride (PTHC), have been investigated by small angle neutron scattering (SANS). The SANS spectra exhibit a pronounced peak at low salt concentration, indicating the presence of repulsive intermicellar interactions. Model-independent real space information about the structure is obtained from a generalized indirect Fourier transformation (GIFT) technique in combination with a suitable model for the interparticle structure factor. The interparticle interaction is captured using the rescaled mean spherical approximation (RMSA) closure relation and a Yukawa form of the interaction potential. Further quantification of the geometrical parameters of the micelles was achieved by a complete fit of the SANS data using a prolate ellipsoidal form factor and the RMSA structure factor. The present study shows that PTHC induces a decrease in the fractional charge of the micelles due to adsorption at the micellar surface and consequent growth of the SDS micelles from nearly globular to rodlike as the concentration of PTHC increases.

  16. Small angle neutron scattering study of sodium dodecyl sulfate micellar growth driven by addition of a hydrotropic salt.

    PubMed

    Hassan, P A; Fritz, Gerhard; Kaler, Eric W

    2003-01-01

    The structures of aggregates formed in aqueous solutions of an anionic surfactant, sodium dodecyl sulfate (SDS), with the addition of a cationic hydrotropic salt, p-toluidine hydrochloride (PTHC), have been investigated by small angle neutron scattering (SANS). The SANS spectra exhibit a pronounced peak at low salt concentration, indicating the presence of repulsive intermicellar interactions. Model-independent real space information about the structure is obtained from a generalized indirect Fourier transformation (GIFT) technique in combination with a suitable model for the interparticle structure factor. The interparticle interaction is captured using the rescaled mean spherical approximation (RMSA) closure relation and a Yukawa form of the interaction potential. Further quantification of the geometrical parameters of the micelles was achieved by a complete fit of the SANS data using a prolate ellipsoidal form factor and the RMSA structure factor. The present study shows that PTHC induces a decrease in the fractional charge of the micelles due to adsorption at the micellar surface and consequent growth of the SDS micelles from nearly globular to rodlike as the concentration of PTHC increases. PMID:16256467

  17. Characterization and comparative study of coal combustion residues from a primary and additional flue gas secondary desulfurization process

    SciTech Connect

    Gomes, S.; Francois, M.; Evrard, O.; Pellissier, C.

    1998-11-01

    An extensive characterization and comparative study was done on two flue gas desulfurization (FGD) residues derived from the same coal. LR residues (originated from Loire/Rhone in the south of Lyon, France) are obtained after a primary desulfurization process (SO{sub 2} is trapped by reaction with CaO at a temperature of about 1100 C), and LM residues (originating from La Maxe, near Metz in the east of France) are obtained after an additional secondary desulfurization process (SO{sub 2} is removed further by reaction with Ca(OH){sub 2} at a temperature of about 120 C). Various and complementary investigation methods were used to determine their chemical, physical, and mineralogical properties: x-ray fluorescence and diffraction, scanning electron microscopy, differential scanning calorimetry, thermogravimetry analysis, granulometric distribution, pycnometric density, BET specific surface area and pH, conductivity measurements, and chemical analysis of their insoluble fraction. The FGD residues contain basically two main components: a silico-aluminous fly ash part and calcic FGD phases. In the LR residues the two components can be considered as independent, whereas they are linked in the LM residues because chemical reactions have occurred, leading to the formation of silico-calcic gel CSH, hydrated aluminate AFm, and AFt phases.

  18. Tropical Tropospheric Ozone from SHADOZ (Southern Hemisphere ADditional Ozonesondes) Network: A Project for Satellite Research, Process Studies, Education

    NASA Technical Reports Server (NTRS)

    Thompson, Anne M.; Witte, Jacquelyn C.; Oltmans, Samuel J.; Schmidlin, Francis J.; Coetzee, G. J. R.; Hoegger, Bruno; Kirchhoff, V. W. J. H.; Ogawa, Toshihiro; Kawakami, Shuji; Posny, Francoise

    2002-01-01

    The first climatological overview of total, stratospheric and tropospheric ozone in the southern hemisphere tropical and subtropics is based on ozone sounding data from 10 sites comprising the Southern Hemisphere Additional OZonesondes (SHADOZ) network. The period covered is 1998-2000. Observations were made over: Ascension Island; Nairobi, Kenya; Irene, South Africa; Reunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil. Campaign data were collected on a trans-Atlantic oceanographic cruise and during SAFARI-2000 in Zambia. The ozone data, with simultaneous temperature profiles to approx. 7 hPa and relative humidity to approx. 200 hPa, reside at: . SHADOZ ozone time-series and profiles give a perspective on tropical total, stratospheric and tropospheric ozone. Prominent features are highly variable tropospheric ozone and a zonal wave-one pattern in total (and tropospheric) column ozone. Total, stratospheric and tropospheric column ozone amounts peak between August and November and are lowest between March and May. Tropospheric ozone variability over the Indian and Pacific Ocean displays influences of the Indian Ocean Dipole and convective mixing. Pollution transport from Africa and South America is a seasonal feature. Tropospheric ozone seasonality over the Atlantic Basin shows effects of regional subsidence and recirculation as well as biomass burning. Dynamical and chemical influences appear to be of comparable magnitude though model studies are needed to quantify this.

  19. A five-year study of the impact of nitrogen addition on methane uptake in alpine grassland

    PubMed Central

    Yue, Ping; Li, Kaihui; Gong, Yanming; Hu, Yukun; Mohammat, Anwar; Christie, Peter; Liu, Xuejun

    2016-01-01

    It remains unclear how nitrogen (N) deposition affects soil methane (CH4) uptake in semiarid and arid zones. An in situ field experiment was conducted from 2010 to 2014 to systematically study the effect of various N application rates (0, 10, 30, and 90 kg N ha−1 yr−1) on CH4 flux in alpine grassland in the Tianshan Mountains. No significant influence of N addition on CH4 uptake was found. Initially the CH4 uptake rate increased with increasing N application rate by up to 11.5% in 2011 and then there was gradual inhibition by 2014. However, the between-year variability in CH4 uptake was very highly significant with average uptake ranging from 52.9 to 106.6 μg C m−2 h−1 and the rate depended largely on seasonal variability in precipitation and temperature. CH4 uptake was positively correlated with soil temperature, air temperature and to a lesser extent with precipitation, and was negatively correlated with soil moisture and NO3−-N content. The results indicate that between-year variability in CH4 uptake was impacted by precipitation and temperature and was not sensitive to elevated N deposition in alpine grassland. PMID:27571892

  20. Did the addition of concomitant chemotherapy to radiotherapy improve outcomes in hypopharyngeal cancer? A population-based study

    PubMed Central

    Hall, S.F.; Griffiths, R.

    2016-01-01

    Background For oncologists and for patients, no site-specific clinical trial evidence has emerged for the use of concurrent chemotherapy with radiotherapy (ccrt) over radiotherapy (rt) alone for cancer of the hypopharynx (hpc) or for other human papilloma virus–negative head-and-neck cancers. Methods This retrospective population-based cohort study using administrative data compared treatments over time (1990–2000 vs. 2000–2010), treatment outcomes, and outcomes over time in 1333 cases of hpc diagnosed in Ontario between January 1990 and December 2010. Results The incidence of hpc is declining; the use of ccrt that began in 2001 is increasing; and the 3-year overall survival for all patients remains poor at 34.6%. No difference in overall survival was observed in a comparison of patients treated in the decade before ccrt and of patients treated in the decade during the uptake of ccrt. Conclusions The addition of ccrt to the armamentarium of treatment options for oncologists treating head-and-neck patients did not improve outcomes for hpc at the population level. PMID:27536177