Science.gov

Sample records for additional testing showed

  1. View of building 11050, showing two additions on east and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing two additions on east and north side. Looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  2. View of building 11050, showing metal clad addition on east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing metal clad addition on east elevation, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  3. View of building 11050 showing south side with modern addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  4. What Do Blood Tests Show?

    MedlinePlus

    ... shows the ranges for blood glucose levels after 8 to 12 hours of fasting (not eating). It shows the normal range and the abnormal ranges that are a sign of prediabetes or diabetes. Plasma Glucose Results (mg/dL)* Diagnosis 70 to 99 ...

  5. 19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS CONCRETE BLOCK CONSTRUCTION OF ADDITION. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  6. Side elevation of Building 477 showing the shed roof addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side elevation of Building 477 showing the shed roof addition and horizontal siding at the ends, view facing northwest - U.S. Marine Corps Base Hawaii, Kaneohe Bay, Golf Course Equipment & Repair Shop, Reeves & Moffett Roads, Kaneohe, Honolulu County, HI

  7. 13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING BANNISTER, HANDRAIL AND NEWEL POSTS AND TONGUE AND GROOVE WAINSCOTING. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  8. View of southwest corner showing ell addition and carport, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of southwest corner showing ell addition and carport, facing northeast. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  9. 1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ANGLES IN BUILDING AT SOUTHERN END. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  10. 10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT LOG WALL OF MAIN HOUSE - Whitcomb Cabin, BZ Corners, Glenwood County Road (Conboy Lake National Wildlife Refuge), Glenwood, Klickitat County, WA

  11. Interior view of addition pharmacy showing dutch door and security ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of addition pharmacy showing dutch door and security ceiling grate, facing north. - Albrook Air Force Station, Dispensary, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ

  12. 4. WEST SIDE OF CANNERY In addition to showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. WEST SIDE OF CANNERY In addition to showing the on-going deterioration of the buildings, this view shows the variety of types of construction used as the numerous additions were being made. The wooden covered conveyor system, which transported empty cans from the can storage area to the canning floor can be seen at the base of the smoke stack to the right. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  13. 15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

  14. Oblique view from southwest showing newer (1966) addition with taller ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Oblique view from southwest showing newer (1966) addition with taller original structure, view facing east-northeast - U.S. Naval Base, Pearl Harbor, Industrial X-Ray Building, Off Sixth Street, adjacent to and south of Facility No. 11, Pearl City, Honolulu County, HI

  15. 32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR AT PHOTO LEFT CENTER AND 1-LIGHT OVER 1LIGHT SASH WINDOW THROUGH WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  16. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  17. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  18. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  19. 8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF NAILS USED TO ADHERE PORTLAND CEMENT PLASTER, SOUTH ADOBE WALL ADJACENT TO WINDOW Note: Photographs Nos. AZ-159-A-9 through AZ-159-A-10 are photocopies of photographs. The original prints and negatives are located in the SCS Tucson Plant Materials Center, Tucson, Arizona. Photographer Ted F. Spaller. - Tucson Plant Material Center, Machinery Shed, 3241 North Romero Road, Tucson, Pima County, AZ

  20. 51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER AT LOWER LEFT, AND FOUNDATIONS FOR ROD MILL BETWEEN COOLER AND STEPHENS-ADAMSON INCLINED BUCKET ELEVATOR. THE BELT CONVEYOR TO RIGHT OF ELEVATOR FED ELEVATOR FROM ROD MILL. 100-TON ORE BIN AND DUST COLLECTOR IS BEHIND FRAMING BENT. NOTE CONVEYOR EMERGING FROM BOTTOM OF ORE BIN, THIS AND THE INCLINED ELEVATOR FED THE SYMONS SCREEN (MISSING). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  1. 4. VIEW SOUTHWEST COMPONENTS TEST LAB TEST BAY DETAIL SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW SOUTHWEST COMPONENTS TEST LAB TEST BAY DETAIL SHOWING EMERGENCY SHOWER, AND EYEWASH, AND OBSERVATION WINDOW. STORAGE TANKS ON ROOF. - Marshall Space Flight Center, East Test Area, Components Test Laboratory, Huntsville, Madison County, AL

  2. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  3. [Patch-testing methods: additional specialised or additional series].

    PubMed

    Cleenewerck, M-B

    2009-01-01

    The tests in the European standard battery must occasionally be supplemented by specialised or additional batteries, particularly where the contact allergy is thought to be of occupational origin. These additional batteries cover all allergens associated with various professional activities (hairdressing, baking, dentistry, printing, etc.) and with different classes of materials and chemical products (glue, plastic, rubber...). These additional tests may also include personal items used by patients on a daily basis such as cosmetics, shoes, plants, textiles and so on.

  4. 14 CFR 29.927 - Additional tests.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Additional tests. 29.927 Section 29.927... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  5. 14 CFR 27.927 - Additional tests.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Additional tests. 27.927 Section 27.927... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  6. 14 CFR 29.927 - Additional tests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Additional tests. 29.927 Section 29.927... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  7. 14 CFR 27.927 - Additional tests.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Additional tests. 27.927 Section 27.927... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  8. 14 CFR 29.927 - Additional tests.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Additional tests. 29.927 Section 29.927... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  9. 14 CFR 27.927 - Additional tests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Additional tests. 27.927 Section 27.927... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.927 Additional tests. (a) Any additional dynamic, endurance, and operational tests, and vibratory investigations necessary to...

  10. 78 FR 22209 - Additional Synthetic Drug Testing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... COMMISSION 10 CFR Part 26 Additional Synthetic Drug Testing AGENCY: Nuclear Regulatory Commission. ACTION... NRC amend its Fitness for Duty program regulations to amend drug testing requirements to test for additional synthetic drugs currently not included in the regulations. The NRC determined that the...

  11. Caustic addition system operability test procedure

    SciTech Connect

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E).

  12. 1. VIEW EAST, COMPONENTS TEST LABORATORY SHOWING CATCH BASINS, TURBINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW EAST, COMPONENTS TEST LABORATORY SHOWING CATCH BASINS, TURBINE TESTING AREA, AND PUMP TESTING TOWER. - Marshall Space Flight Center, East Test Area, Components Test Laboratory, Huntsville, Madison County, AL

  13. Laboratory tests of sludge-control additives

    SciTech Connect

    Tatnall, R.E.

    1996-07-01

    Laboratory {open_quotes}jar{close_quotes} tests compared eleven different fuel oil and diesel fuel sludge-control additives. Factors studied included (1) ability to disperse and prevent buildup of sludge deposits on surfaces, (2) ability to protect steel from corrosion, (3) ability to inhibit growth and proliferation of bacteria, and (4) ability to disperse water. Results varied greatly, and it was found that many commercial products do not do what they claim. It is concluded that fuel retailers should not believe manufacturers` claims for their additive products, but rather should test such products themselves to be sure that the benefits of treatment are real. A simplified form of the procedure used here is proposed as one way for dealers to do such testing.

  14. The teratology testing of food additives.

    PubMed

    Barrow, Paul C; Spézia, François

    2013-01-01

    The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals.

  15. Detail of east side of Test Sand 'A' base, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of east side of Test Sand 'A' base, showing flame deflector at bottom of stand. Stairs and handrails were added after test stand was converted to test propellant flow in components as opposed to firing rocket engines. - Jet Propulsion Laboratory Edwards Facility, Test Stand A, Edwards Air Force Base, Boron, Kern County, CA

  16. 17. Building 202, observation room for test cell, showing panel, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Building 202, observation room for test cell, showing panel, abort button, phones, and observation window. View looking northwest. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  17. 7. INTERIOR VIEW, SHOWING PROPELLER TEST STAND AND BOMB BAYS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR VIEW, SHOWING PROPELLER TEST STAND AND BOMB BAYS. - Wright-Patterson Air Force Base, Area B, Building No. 20A, Propeller Test Complex, Seventh Street, from E to G Streets, Dayton, Montgomery County, OH

  18. 5. INTERIOR VIEW, SHOWING PROPELLER TEST STAND AND BOMB BAYS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. INTERIOR VIEW, SHOWING PROPELLER TEST STAND AND BOMB BAYS. - Wright-Patterson Air Force Base, Area B, Building No. 20A, Propeller Test Complex, Seventh Street, from E to G Streets, Dayton, Montgomery County, OH

  19. 12. Interior view of the 1930's leant0 addition, showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Interior view of the 1930's lean-t0 addition, showing the commercial storage and space and the addition's roof framing; looking north - Horsepasture Store, U.S. Route 58 & State Route 687, Horse Pasture, Henry County, VA

  20. Detail of north side of Test Stand 'A' base, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of north side of Test Stand 'A' base, showing tanks for distilled water (left), fuel (center), and gaseous nitrogen (right). Other tanks present for tests were removed before this image was taken. - Jet Propulsion Laboratory Edwards Facility, Test Stand A, Edwards Air Force Base, Boron, Kern County, CA

  1. 38. Historic photo of Building 202 test cell interior, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    38. Historic photo of Building 202 test cell interior, showing damage to test stand A and rocket engine after failure and explosion of engine, December 12, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-49376. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  2. 2. ROCKET ENGINE TEST STAND, SHOWING TANK (BUILDING 1929) AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. ROCKET ENGINE TEST STAND, SHOWING TANK (BUILDING 1929) AND GARAGE (BUILDING 1930) AT LEFT REAR. Looking to west. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA

  3. 39. Historic photo of Building 202 test cell exterior, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. Historic photo of Building 202 test cell exterior, showing fiberglass cladding blown out by hydrogen fire during rocket engine testing, April 27, 1959. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-50472. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  4. 1. EXTERIOR VIEW, LOOKING SOUTHEAST, SHOWING FLIGHT TEST HANGARS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. EXTERIOR VIEW, LOOKING SOUTHEAST, SHOWING FLIGHT TEST HANGARS IN CENTER, BUILDING 7 ON LEFT, AND BUILDING 8 ON RIGHT. - Wright-Patterson Air Force Base, Area B, Building 1/9, Flight Test Hangars, On flightline between Ninth & Tenth Streets, Dayton, Montgomery County, OH

  5. 72. View of test system showing Klystron tube installed in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. View of test system showing Klystron tube installed in test position on first floor of transmitter building no. 102. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

  6. 54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ADDITION ON LEFT WITH BASE OF EXHAUST STACK, PORTION OF TOPPLED STACK ON LOWER RIGHT IN VIEW, AND UPPER TAILINGS POND BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  7. 10. EXTERIOR VIEW OF ARVFS TEST FACILITY SHOWING BUNKER, CABLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. EXTERIOR VIEW OF ARVFS TEST FACILITY SHOWING BUNKER, CABLE CHASE, FRAME, AND SHIELDING TANK. CAMERA FACING NORTHEAST. INEL PHOTO NUMBER 65-6171, TAKEN NOVEMBER 10, 1965. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  8. Detail, Face C (rear), showing Interference Analysis System Linear Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail, Face C (rear), showing Interference Analysis System Linear Test Array mounted at Level 4A - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  9. 18. INTERIOR VIEW INSIDE BUNKER DURING PREPARATIONS FOR TEST. SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. INTERIOR VIEW INSIDE BUNKER DURING PREPARATIONS FOR TEST. SHOWS TWO OPERATORS, INCLUDING ONE AIR FORCE MAN, INSTRUMENT PANEL, EQUIPMENT, MONITORING SCREENS, AND OTHER EQUIPMENT, SOME OF IT NAMED (IE, 'GALVANOMETER,' 'HONEYWELL,' 'KODAC.' INEL PHOTO NUMBER 65-6180, TAKEN NOVEMBER 10, 1965. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  10. 12. Exterior view, showing tank and piping associated with Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Exterior view, showing tank and piping associated with Test Cell 7, Systems Integration Laboratory Building (T-28), looking west. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  11. 29. PLAN OF THE ARVFS FIELD TEST FACILITY SHOWING BUNKER, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. PLAN OF THE ARVFS FIELD TEST FACILITY SHOWING BUNKER, CABLE CHASE, SHIELDING TANK AND FRAME ASSEMBLY. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-701-1. INEL INDEX CODE NUMBER: 075 0701 851 151970. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  12. 30. ELEVATION OF ARVFS FIELD TEST FACILITY SHOWING VIEW OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. ELEVATION OF ARVFS FIELD TEST FACILITY SHOWING VIEW OF SOUTH SIDE OF FACILITY, INCLUDING BUNKER, CABLE CHASE, SHIELDING TANK, AND FRAME ASSEMBLY. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-701-2. INEL INDEX CODE NUMBER: 075 0701 851 151971. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  13. 42 CFR 84.308 - Additional testing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....S.C. 552(a) and 1 CFR Part 51. All approved material is available for inspection at NIOSH, National... will test the eye protection's resistance to fogging in accordance with the method specified in BS EN 168:2002, Clause 16, Test for resistance to fogging of oculars. The lens shall remain free...

  14. 42 CFR 84.308 - Additional testing.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ....S.C. 552(a) and 1 CFR Part 51. All approved material is available for inspection at NIOSH, National... will test the eye protection's resistance to fogging in accordance with the method specified in BS EN 168:2002, Clause 16, Test for resistance to fogging of oculars. The lens shall remain free...

  15. 42 CFR 84.308 - Additional testing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....S.C. 552(a) and 1 CFR Part 51. All approved material is available for inspection at NIOSH, National... will test the eye protection's resistance to fogging in accordance with the method specified in BS EN 168:2002, Clause 16, Test for resistance to fogging of oculars. The lens shall remain free...

  16. 14 CFR 29.927 - Additional tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... controlled by the pilot under normal operating conditions (such as where the primary engine power control is...: (1) Category A. Unless such failures are extremely remote, it must be shown by test that any...

  17. 14 CFR 29.927 - Additional tests.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... controlled by the pilot under normal operating conditions (such as where the primary engine power control is...: (1) Category A. Unless such failures are extremely remote, it must be shown by test that any...

  18. Coagulation tests show significant differences in patients with breast cancer.

    PubMed

    Tas, Faruk; Kilic, Leyla; Duranyildiz, Derya

    2014-06-01

    Activated coagulation and fibrinolytic system in cancer patients is associated with tumor stroma formation and metastasis in different cancer types. The aim of this study is to explore the correlation of blood coagulation assays for various clinicopathologic factors in breast cancer patients. A total of 123 female breast cancer patients were enrolled into the study. All the patients were treatment naïve. Pretreatment blood coagulation tests including PT, APTT, PTA, INR, D-dimer, fibrinogen levels, and platelet counts were evaluated. Median age of diagnosis was 51 years old (range 26-82). Twenty-two percent of the group consisted of metastatic breast cancer patients. The plasma level of all coagulation tests revealed statistically significant difference between patient and control group except for PT (p<0.001 for all variables except for PT; p=0.08). Elderly age (>50 years) was associated with higher D-dimer levels (p=0.003). Metastatic patients exhibited significantly higher D-dimer values when compared with early breast cancer patients (p=0.049). Advanced tumor stage (T3 and T4) was associated with higher INR (p=0.05) and lower PTA (p=0.025). In conclusion, coagulation tests show significant differences in patients with breast cancer.

  19. Basophil activation test with food additives in chronic urticaria patients.

    PubMed

    Kang, Min-Gyu; Song, Woo-Jung; Park, Han-Ki; Lim, Kyung-Hwan; Kim, Su-Jung; Lee, Suh-Young; Kim, Sae-Hoon; Cho, Sang-Heon; Min, Kyung-Up; Chang, Yoon-Seok

    2014-01-01

    The role of food additives in chronic urticaria (CU) is still under investigation. In this study, we aimed to explore the association between food additives and CU by using the basophil activation test (BAT). The BAT using 15 common food additives was performed for 15 patients with CU who had a history of recurrent urticarial aggravation following intake of various foods without a definite food-specific IgE. Of the 15 patients studied, two (13.3%) showed positive BAT results for one of the tested food additives. One patient responded to monosodium glutamate, showing 18.7% of CD203c-positive basophils. Another patient showed a positive BAT result to sodium benzoate. Both patients had clinical correlations with the agents, which were partly determined by elimination diets. The present study suggested that at least a small proportion of patients with CU had symptoms associated with food additives. The results may suggest the potential utility of the BAT to identity the role of food additives in CU.

  20. Basophil Activation Test with Food Additives in Chronic Urticaria Patients

    PubMed Central

    Kang, Min-Gyu; Song, Woo-Jung; Park, Han-Ki; Lim, Kyung-Hwan; Kim, Su-Jung; Lee, Suh-Young; Kim, Sae-Hoon; Cho, Sang-Heon; Min, Kyung-Up

    2014-01-01

    The role of food additives in chronic urticaria (CU) is still under investigation. In this study, we aimed to explore the association between food additives and CU by using the basophil activation test (BAT). The BAT using 15 common food additives was performed for 15 patients with CU who had a history of recurrent urticarial aggravation following intake of various foods without a definite food-specific IgE. Of the 15 patients studied, two (13.3%) showed positive BAT results for one of the tested food additives. One patient responded to monosodium glutamate, showing 18.7% of CD203c-positive basophils. Another patient showed a positive BAT result to sodium benzoate. Both patients had clinical correlations with the agents, which were partly determined by elimination diets. The present study suggested that at least a small proportion of patients with CU had symptoms associated with food additives. The results may suggest the potential utility of the BAT to identity the role of food additives in CU. PMID:24527415

  1. 50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100TON STEEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100-TON STEEL UNOXIDIZED ORE BIN, STEPHENS-ADAMSON 15 TON/HR INCLINED BUCKET ELEVATOR, AND DUST COLLECTION BIN IN UPPER RIGHT QUADRANT. THE ROD MILL CIRCUIT STOOD IN FRONT OF THE BUCKET ELEVATOR AND BEHIND THE BAKER COOLER (LEFT CENTER). MILL SOLUTION TANKS WERE IN FRONT OF THE CRUSHED OXIDIZED ORE BIN (CENTER), AND THE MILL FLOOR WAS THE NEXT LEVEL DOWN (RIGHT). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  2. 21 CFR 660.54 - Potency tests, specificity tests, tests for heterospecific antibodies, and additional tests for...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... heterospecific antibodies, and additional tests for nonspecific properties. 660.54 Section 660.54 Food and Drugs..., specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties. The...) Specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties....

  3. 21 CFR 660.54 - Potency tests, specificity tests, tests for heterospecific antibodies, and additional tests for...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... heterospecific antibodies, and additional tests for nonspecific properties. 660.54 Section 660.54 Food and Drugs..., specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties. The...) Specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties....

  4. 21 CFR 660.54 - Potency tests, specificity tests, tests for heterospecific antibodies, and additional tests for...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... heterospecific antibodies, and additional tests for nonspecific properties. 660.54 Section 660.54 Food and Drugs..., specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties. The...) Specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties....

  5. 21 CFR 660.54 - Potency tests, specificity tests, tests for heterospecific antibodies, and additional tests for...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... heterospecific antibodies, and additional tests for nonspecific properties. 660.54 Section 660.54 Food and Drugs..., specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties. The...) Specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties....

  6. 21 CFR 660.54 - Potency tests, specificity tests, tests for heterospecific antibodies, and additional tests for...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... heterospecific antibodies, and additional tests for nonspecific properties. 660.54 Section 660.54 Food and Drugs..., specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties. The...) Specificity tests, tests for heterospecific antibodies, and additional tests for nonspecific properties....

  7. 1. TEST STAND 1A ENVIRONS, SHOWING WEST SIDE OF TEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. TEST STAND 1-A ENVIRONS, SHOWING WEST SIDE OF TEST STAND 1-A, RP1 COMBINED FUEL STORAGE TANK FARM BELOW WATER TANKS ON HILLSIDE TO LEFT, AND TEST STAND 1-B IN DISTANCE AT RIGHT. Looking east. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  8. Tests show DMSO effective for HDS, HDN catalyst sulfiding

    SciTech Connect

    Christman, R.D.; Plesko, R.W. ); Donahue, M. ); Wilson, R.E. )

    1989-09-18

    This paper describes tests which have shown that dimethyl sulfoxide (DMSO) is an effective agent for sulfiding hydrotreating catalysts. Thus, DMSO can be a suitable replacement for sulfiding agents that have been classified as hazardous substances by the U.S. Environmental Protection Agency (EPA). All of the commonly used sulfur compounds were originally classified by EPA as hazardous chemicals. Gaylord Chemical Corp. has petitioned EPA to remove DMS from the list of hazardous chemicals.

  9. News Note: Addition of drug to standard chemo for prostate cancer shows no benefit

    Cancer.gov

    Prostate cancer patients in a phase 3 trial who were non-responsive to hormone therapy and received the investigational agent atrasentan in addition to a standard chemotherapy regimen, did not have longer survival or longer progression-free survival compared to the patients on the same chemotherapy regimen and a placebo. This determination was made by the trial’s Data and Safety Monitoring Committee (DSMC) based on a planned interim analysis of the trial.

  10. Flight Tests of an Airplane Showing Dependence of the Maximum Lift Coefficient on the Test Conditions

    NASA Technical Reports Server (NTRS)

    Soule, H A; Hootman, James A

    1937-01-01

    Data are presented to show the extent to which the maximum lift coefficient and consequently the minimum speed of an airplane, determined by flight tests, may vary with test conditions. The data show that cl-max may vary as much as 14 percent, depending on the altitude and wing loading at which the tests were made, the position or motion of the propeller, and the rate at which the angle of attack is changing when the maximum lift coefficient is obtained. The variation of the maximum lift coefficient with these factors, which are under the control of the test engineer, shows the need of standardizing the test procedure. A further variation is shown with wing conditions as affected by weathering and vibration, factors that cannot be completely controlled.

  11. Test Procedure - pumping system for caustic addition project

    SciTech Connect

    Leshikar, G.A.

    1994-10-01

    This test procedure provides the requirements for sub-system testing and integrated operational testing of the submersible mixer pump and caustic addition equipment by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E).

  12. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  13. 30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING WEST. ORIGINALLY HAD SUSPENDED ACOUSTICAL CEILINGS WITH FLOURESCENT LIGHTING AND ASPHALT MASTIC TILE FLOORS - Underwriters' Laboratories, 207-231 East Ohio Street, Chicago, Cook County, IL

  14. Simple Additivity of Stochastic Psychological Processes: Tests and Measures.

    ERIC Educational Resources Information Center

    Balakrishnan, J. D.

    1994-01-01

    Methods of testing relatively complete (distributional) models of internal psychological processes are described. It is shown that there is a sufficient condition for additive models to imply this property of the likelihood ratio. Also discussed are the examination of hazard rate functions of component processes and change in cumulative…

  15. 8. X15 ENGINE TESTING. A color print showing the engine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. X-15 ENGINE TESTING. A color print showing the engine during test firing. View from the rear of the test stand looking northwest. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA

  16. Development of additional tasks for the executive function performance test.

    PubMed

    Hahn, Bridget; Baum, Carolyn; Moore, Jennifer; Ehrlich-Jones, Linda; Spoeri, Susan; Doherty, Meghan; Wolf, Timothy J

    2014-01-01

    OBJECTIVE. The Executive Function Performance Test (EFPT) is a reliable and valid performance-based assessment of executive function for people with stroke. The objective of this study was to enhance the clinical utility of the EFPT by developing and testing additional tasks for the EFPT in the Alternate EFPT (aEFPT). METHOD. We performed a cross-sectional study with poststroke participants (n = 25) and healthy control participants (n = 25). All participants completed a neuropsychological assessment battery and both the EFPT and the aEFPT. RESULTS. No statistically significant differences were found between the EFPT and the aEFPT when examining total scores, construct scores, and two overall task scores. Correlations between the aEFPT and the neuropsychological measures were adequate to strong (r2s = .59-.83). CONCLUSION. The aEFPT tasks are comparable to the original EFPT tasks, providing occupational therapy practitioners with additional tasks that can be used clinically to identify performance-based executive function deficits in people with stroke. PMID:25397771

  17. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Pilot-Scale Test Results

    SciTech Connect

    Gary M. Blythe

    2006-03-01

    This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, ''Field Testing of a Wet FGD Additive.'' The objective of the project is to demonstrate the use of a flue gas desulfurization (FGD) additive, Degussa Corporation's TMT-15, to prevent the reemissions of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate that the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine TMT salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project will conduct pilot and full-scale tests of the TMT-15 additive in wet FGD absorbers. The tests are intended to determine required additive dosage requirements to prevent Hg{sup 0} reemissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Power River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, TXU Generation Company LP, Southern Company, and Degussa Corporation. TXU Generation has provided the Texas lignite/PRB co-fired test site for pilot FGD tests, Monticello Steam Electric Station Unit 3. Southern Company is providing the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot and full-scale jet bubbling reactor (JBR) FGD systems to be tested. A third utility, to be named later, will provide the high-sulfur Eastern bituminous coal full-scale FGD test site. Degussa Corporation is providing the TMT-15 additive and technical support to the test program. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in

  18. 7. BUILDING 604F, INTERIOR OF BULL PEN SHOWING TESTING STAND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. BUILDING 604-F, INTERIOR OF BULL PEN SHOWING TESTING STAND AND HEAVY WOOD LINING ON CONCRETE WALLS. STEEL PLATE ABOVE TEST STAND DEFLECTS SHRAPNEL, SCREEN FURTHER HELPS TO CONTAIN PARTICLES. ONLY SMALL EXPLOSIVES WERE TESTED HERE (GRENADES, MINES, BOMB FUZES, ETC.). - Picatinny Arsenal, 600 Area, Test Areas District, State Route 15 near I-80, Dover, Morris County, NJ

  19. Testing for Additivity at Select Mixture Groups of Interest Based on Statistical Equivalence Testing Methods

    SciTech Connect

    Stork, LeAnna M.; Gennings, Chris; Carchman, Richard; Carter, Jr., Walter H.; Pounds, Joel G.; Mumtaz, Moiz

    2006-12-01

    Several assumptions, defined and undefined, are used in the toxicity assessment of chemical mixtures. In scientific practice mixture components in the low-dose region, particularly subthreshold doses, are often assumed to behave additively (i.e., zero interaction) based on heuristic arguments. This assumption has important implications in the practice of risk assessment, but has not been experimentally tested. We have developed methodology to test for additivity in the sense of Berenbaum (Advances in Cancer Research, 1981), based on the statistical equivalence testing literature where the null hypothesis of interaction is rejected for the alternative hypothesis of additivity when data support the claim. The implication of this approach is that conclusions of additivity are made with a false positive rate controlled by the experimenter. The claim of additivity is based on prespecified additivity margins, which are chosen using expert biological judgment such that small deviations from additivity, which are not considered to be biologically important, are not statistically significant. This approach is in contrast to the usual hypothesis-testing framework that assumes additivity in the null hypothesis and rejects when there is significant evidence of interaction. In this scenario, failure to reject may be due to lack of statistical power making the claim of additivity problematic. The proposed method is illustrated in a mixture of five organophosphorus pesticides that were experimentally evaluated alone and at relevant mixing ratios. Motor activity was assessed in adult male rats following acute exposure. Four low-dose mixture groups were evaluated. Evidence of additivity is found in three of the four low-dose mixture groups.The proposed method tests for additivity of the whole mixture and does not take into account subset interactions (e.g., synergistic, antagonistic) that may have occurred and cancelled each other out.

  20. Additional Revised Push-Up Test Norms for College Students

    ERIC Educational Resources Information Center

    Mozumdar, Arupendra; Liguori, Gary; Baumgartner, Ted A.

    2010-01-01

    The push-up test is commonly used to assess arm and shoulder girdle strength and endurance. Baumgartner, Oh, Chung, and Hales (2002) developed a revised push-up test for college students with a standardized test protocol. The purpose of the present study was to develop percentile norms for the revised push-up test based on the push-up scores of…

  1. 3. INTERIOR VIEW, SHOWING JET ENGINE TEST STAND. WrightPatterson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. INTERIOR VIEW, SHOWING JET ENGINE TEST STAND. - Wright-Patterson Air Force Base, Area B, Building 71A, Propulsion Research Laboratory, Seventh Street between D & G Streets, Dayton, Montgomery County, OH

  2. 95. ARAIV. Aerial view of ML1. Shows test and control ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    95. ARA-IV. Aerial view of ML-1. Shows test and control buildings, berms, fencing. March 14, 1963. Ineel photo no. 63-1666. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  3. LPT. Shield test facility (TAN645) interior. Boiler room shows one ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-645) interior. Boiler room shows one boiler, diesel electric stand unit, and related equipment. Pumice block walls. Photographer: Jack L. Anderson. Date: January 19, 1959. INEEL negative no. 59-286 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  4. 40 CFR 63.504 - Additional requirements for performance testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emission test using the techniques specified in § 63.11(b)(4); (2) Determine the net heating value of the... the Administrator the opportunity to have an observer present during the test. If after 30 days notice... in Method 301, 40 CFR part 63, appendix A. (c) Notwithstanding any other provision of this...

  5. 40 CFR 63.1352 - Additional test methods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... determine the rates of emission of hydrogen chloride (HCl) from kilns, in-line kiln/raw mills and associated... operators conducting tests to determine the rates of emission of hydrogen chloride (HCl) from kilns,...

  6. Testing Nested Additive, Multiplicative, and General Multitrait-Multimethod Models.

    ERIC Educational Resources Information Center

    Coenders, Germa; Saris, Willem E.

    2000-01-01

    Provides alternatives to the definitions of additive and multiplicative method effects in multitrait-multimethod data given by D. Campbell and E. O'Connell (1967). The alternative definitions can be formulated by means of constraints in the parameters of the correlated uniqueness model (H. Marsh, 1989). (SLD)

  7. LPT. Shield test facility (TAN645 and 646). Elevations show three ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-645 and -646). Elevations show three types of siding: Asbestos cement, pumice block, concrete. Ralph M. Parsons 1229-17 ANP/GE-6-6445-A-3. April 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 037-06445/0646-00-693-107349 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  8. LPT. Shield test facility (TAN645 and 646). Sections show relationships ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-645 and -646). Sections show relationships among control rooms, coupling station, counting rooms, pools, equipment rooms, data room and other areas. Ralph M. Parsons 1229-17 ANP/GE-6-645-A-4. April 1957. Approved by INEEL Classification Office for public release. INEEL index code no. 037-0645/0646-00-693-107350 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  9. 40 CFR 63.504 - Additional requirements for performance testing.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... in Method 301, 40 CFR part 63, appendix A. (c) Notwithstanding any other provision of this subpart... customer; or necessitating that the owner or operator make product in excess of demand. (2) References in... emission test using the techniques specified in § 63.11(b)(4); (2) Determine the net heating value of...

  10. 40 CFR 63.1437 - Additional requirements for performance testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... methods shall be validated according to the protocol in Method 301, 40 CFR part 63, appendix A. (c... necessitating that the owner or operator make a product in excess of demand. (iii) Causing plant or testing... General Provisions; (2) Determine the net heating value of the gas being combusted, using the...

  11. 40 CFR 63.1437 - Additional requirements for performance testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... protocol in Method 301, 40 CFR part 63, appendix A. (c) Notwithstanding any other provision of this subpart... demand. (iii) Causing plant or testing personnel to be subject to unsafe conditions. Owners or operators... the techniques specified in § 63.11(b)(4) of the General Provisions; (2) Determine the net...

  12. 40 CFR 63.504 - Additional requirements for performance testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... in Method 301, 40 CFR part 63, appendix A. (c) Notwithstanding any other provision of this subpart... customer; or necessitating that the owner or operator make product in excess of demand. (2) References in... emission test using the techniques specified in § 63.11(b)(4); (2) Determine the net heating value of...

  13. Large-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

    2013-08-01

    One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used

  14. Small-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Schonewill, Philip P.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, G. N.; Mahoney, Lenna A.; Tran, Diana N.; Burns, Carolyn A.; Kurath, Dean E.

    2013-08-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are largely absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale. The small-scale testing and resultant data are described in Mahoney et al. (2012b) and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the

  15. Cannabinoid receptor 1 antagonist treatment induces glucagon release and shows an additive therapeutic effect with GLP-1 agonist in diet-induced obese mice.

    PubMed

    Patel, Kartikkumar Navinchandra; Joharapurkar, Amit Arvind; Patel, Vishal; Kshirsagar, Samadhan Govind; Bahekar, Rajesh; Srivastava, Brijesh Kumar; Jain, Mukul R

    2014-12-01

    Cannabinoid 1 (CB1) receptor antagonists reduce body weight and improve insulin sensitivity. Preclinical data indicates that an acute dose of CB1 antagonist rimonabant causes an increase in blood glucose. A stable analog of glucagon-like peptide 1 (GLP-1), exendin-4 improves glucose-stimulated insulin secretion in pancreas, and reduces appetite through activation of GLP-1 receptors in the central nervous system and liver. We hypothesized that the insulin secretagogue effect of GLP-1 agonist exendin-4 may synergize with the insulin-sensitizing action of rimonabant. Intraperitoneal as well as intracerebroventricular administration of rimonabant increased serum glucose upon glucose challenge in overnight fasted, diet-induced obese C57 mice, with concomitant rise in serum glucagon levels. Exendin-4 reversed the acute hyperglycemia induced by rimonabant. The combination of exendin-4 and rimonabant showed an additive effect in the food intake, and sustained body weight reduction upon repeated dosing. The acute efficacy of both the compounds was additive for inducing nausea-like symptoms in conditioned aversion test in mice, whereas exendin-4 treatment antagonized the effect of rimonabant on forced swim test upon chronic dosing. Thus, the addition of exendin-4 to rimonabant produces greater reduction in food intake owing to increased aversion, but reduces the other central nervous system side effects of rimonabant. The hyperglucagonemia induced by rimonabant is partially responsible for enhancing the antiobesity effect of exendin-4. PMID:25361428

  16. Astronomy Diagnostic Test Results Reflect Course Goals and Show Room for Improvement

    ERIC Educational Resources Information Center

    LoPresto, Michael C.

    2007-01-01

    The results of administering the Astronomy Diagnostic Test (ADT) to introductory astronomy students at Henry Ford Community College over three years have shown gains comparable with national averages. Results have also accurately corresponded to course goals, showing greater gains in topics covered in more detail, and lower gains in topics covered…

  17. ADDITIVE TESTING FOR IMPROVED SULFUR RETENTION: PRELIMINARY REPORT

    SciTech Connect

    Amoroso, J.; Fox, K.

    2011-09-07

    The Savannah River National Laboratory is collaborating with Alfred University to evaluate the potential for additives in borosilicate glass to improve sulfur retention. This preliminary report provides further background on the incorporation of sulfur in glass and outlines the experiments that are being performed by the collaborators. A simulated waste glass composition has been selected for the experimental studies. The first phase of experimental work will evaluate the impacts of BaO, PbO, and V{sub 2}O{sub 5} at concentrations of 1.0, 2.0, and 5.0 wt % on sulfate retention in simulated high level waste borosilicate glass. The second phase of experimental work will evaluate the effects of time at the melt temperature on sulfur retention. The resulting samples will be characterized to determine the amount of sulfur remaining as well as to identify the formation of any crystalline phases. The results will be used to guide the future selection of frits and glass forming chemicals in vitrifying Department of Energy wastes containing high sulfur concentrations.

  18. Guppies Show Behavioural but Not Cognitive Sex Differences in a Novel Object Recognition Test.

    PubMed

    Lucon-Xiccato, Tyrone; Dadda, Marco

    2016-01-01

    The novel object recognition (NOR) test is a widely-used paradigm to study learning and memory in rodents. NOR performance is typically measured as the preference to interact with a novel object over a familiar object based on spontaneous exploratory behaviour. In rats and mice, females usually have greater NOR ability than males. The NOR test is now available for a large number of species, including fish, but sex differences have not been properly tested outside of rodents. We compared male and female guppies (Poecilia reticulata) in a NOR test to study whether sex differences exist also for fish. We focused on sex differences in both performance and behaviour of guppies during the test. In our experiment, adult guppies expressed a preference for the novel object as most rodents and other species do. When we looked at sex differences, we found the two sexes showed a similar preference for the novel object over the familiar object, suggesting that male and female guppies have similar NOR performances. Analysis of behaviour revealed that males were more inclined to swim in the proximity of the two objects than females. Further, males explored the novel object at the beginning of the experiment while females did so afterwards. These two behavioural differences are possibly due to sex differences in exploration. Even though NOR performance is not different between male and female guppies, the behavioural sex differences we found could affect the results of the experiments and should be carefully considered when assessing fish memory with the NOR test. PMID:27305102

  19. Guppies Show Behavioural but Not Cognitive Sex Differences in a Novel Object Recognition Test

    PubMed Central

    Lucon-Xiccato, Tyrone; Dadda, Marco

    2016-01-01

    The novel object recognition (NOR) test is a widely-used paradigm to study learning and memory in rodents. NOR performance is typically measured as the preference to interact with a novel object over a familiar object based on spontaneous exploratory behaviour. In rats and mice, females usually have greater NOR ability than males. The NOR test is now available for a large number of species, including fish, but sex differences have not been properly tested outside of rodents. We compared male and female guppies (Poecilia reticulata) in a NOR test to study whether sex differences exist also for fish. We focused on sex differences in both performance and behaviour of guppies during the test. In our experiment, adult guppies expressed a preference for the novel object as most rodents and other species do. When we looked at sex differences, we found the two sexes showed a similar preference for the novel object over the familiar object, suggesting that male and female guppies have similar NOR performances. Analysis of behaviour revealed that males were more inclined to swim in the proximity of the two objects than females. Further, males explored the novel object at the beginning of the experiment while females did so afterwards. These two behavioural differences are possibly due to sex differences in exploration. Even though NOR performance is not different between male and female guppies, the behavioural sex differences we found could affect the results of the experiments and should be carefully considered when assessing fish memory with the NOR test. PMID:27305102

  20. Flight tests show potential benefits of data link as primary communication medium

    NASA Technical Reports Server (NTRS)

    Scanlon, Charles H.; Knox, Charles E.

    1991-01-01

    Message exchange for air traffic control (ATC) purposes via data link offers the potential benefits of increasing the airspace system safety and efficiency. This is accomplished by reducing communication errors and relieving the overloaded ATC radio frequencies, which hamper efficient message exchanges during peak traffic periods in many busy terminal areas. However, the many uses and advantages of data link create additional questions concerning the interface among the human-users and the cockpit and ground systems. A flight test was conducted in the NASA Langley B-737 airplane to contrast flight operations using current voice communications with the use of data link for transmitting both strategic and tactical ATC clearances during a typical commercial airline flight from takeoff to landing. Commercial airplane pilots were used as test subjects.

  1. Combined exposure to lead, inorganic mercury and methylmercury shows deviation from additivity for cardiovascular toxicity in rats.

    PubMed

    Wildemann, Tanja M; Weber, Lynn P; Siciliano, Steven D

    2015-08-01

    Environmental exposure to metal mixtures in the human population is common. Mixture risk assessments are often challenging because of a lack of suitable data on the relevant mixture. A growing number of studies show an association between lead or mercury exposure and cardiovascular effects. We investigated the cardiovascular effects of single metal exposure or co-exposure to methylmercury [MeHg(I)], inorganic mercury [Hg(II)] and lead [Pb(II)]. Male Wistar rats received four different metal mixtures for 28 days through the drinking water. The ratios of the metals were based on reference and environmental exposure values. Blood and pulse pressure, cardiac output and electrical activity of the heart were selected as end-points. While exposure to only MeHg(I) increased the systolic blood pressure and decreased cardiac output, the effects were reversed with combined exposures (antagonism). In contrast to these effects, combined exposures negatively affected the electrical activity of the heart (synergism). Thus, it appears that estimates of blood total Hg levels need to be paired with estimates of what species of mercury dominate exposure as well as whether lead co-exposure is present to link total blood Hg levels to cardiovascular effects. Based on current human exposure data and our results, there may be an increased risk of cardiac events as a result of combined exposures to Hg(II), MeHg(I) and Pb(II). This increased risk needs to be clarified by analyzing lead and Hg exposure data in relation to cardiac electrical activity in epidemiological studies.

  2. Physical Stress Echocardiography: Prediction of Mortality and Cardiac Events in Patients with Exercise Test showing Ischemia

    PubMed Central

    de Araujo, Ana Carla Pereira; Santos, Bruno F. de Oliveira; Calasans, Flavia Ricci; Pinto, Ibraim M. Francisco; de Oliveira, Daniel Pio; Melo, Luiza Dantas; Andrade, Stephanie Macedo; Tavares, Irlaneide da Silva; Sousa, Antonio Carlos Sobral; Oliveira, Joselina Luzia Menezes

    2014-01-01

    Background Studies have demonstrated the diagnostic accuracy and prognostic value of physical stress echocardiography in coronary artery disease. However, the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia is limited. Objective To evaluate the effectiveness of physical stress echocardiography in the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia. Methods This is a retrospective cohort in which 866 consecutive patients with exercise test positive for myocardial ischemia, and who underwent physical stress echocardiography were studied. Patients were divided into two groups: with physical stress echocardiography negative (G1) or positive (G2) for myocardial ischemia. The endpoints analyzed were all‑cause mortality and major cardiac events, defined as cardiac death and non-fatal acute myocardial infarction. Results G2 comprised 205 patients (23.7%). During the mean 85.6 ± 15.0-month follow-up, there were 26 deaths, of which six were cardiac deaths, and 25 non-fatal myocardial infarction cases. The independent predictors of mortality were: age, diabetes mellitus, and positive physical stress echocardiography (hazard ratio: 2.69; 95% confidence interval: 1.20 – 6.01; p = 0.016). The independent predictors of major cardiac events were: age, previous coronary artery disease, positive physical stress echocardiography (hazard ratio: 2.75; 95% confidence interval: 1.15 – 6.53; p = 0.022) and absence of a 10% increase in ejection fraction. All-cause mortality and the incidence of major cardiac events were significantly higher in G2 (p < 0. 001 and p = 0.001, respectively). Conclusion Physical stress echocardiography provides additional prognostic information in patients with exercise test positive for myocardial ischemia. PMID:25352460

  3. 49 CFR 199.111 - Retention of samples and additional testing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Retention of samples and additional testing. 199... SAFETY DRUG AND ALCOHOL TESTING Drug Testing § 199.111 Retention of samples and additional testing. (a... period, the employee or the employee's representative, the operator, the Administrator, or, if...

  4. Particulate Titanium Matrix Composites Tested--Show Promise for Space Propulsion Applications

    NASA Technical Reports Server (NTRS)

    Lerch, Bradley A.; Ellis, J. Rodney; Arnold. Steven M.

    2004-01-01

    Uniformly distributed particle-strengthened titanium matrix composites (TMCs) can be manufactured at lower cost than many types of continuous-fiber composites. The innovative manufacturing technology combines cold and hot isostatic pressing procedures to produce near-final-shape components. Material stiffness is increased up to 26-percent greater than that of components made with conventional titanium materials at no significant increase in the weight. The improved mechanical performance and low-cost manufacturing capability motivated an independent review to assess the improved properties of ceramic titanium carbide (TiC) particulate-reinforced titanium at elevated temperature. Researchers at the NASA Glenn Research Center creatively designed and executed deformation and durability tests to reveal operating regimes where these materials could lower the cost and weight of space propulsion systems. The program compares the elevated-temperature performance of titanium alloy Ti-6Al-4V matrix material to an alloy containing 10 wt% of TiC particles. Initial experiments showed that at these relatively low particle concentrations the material stiffness of the TMC was improved 20 percent over that of the plain Ti-6Al-4V alloy when tested at 427 C. The proportional limit and ultimate strength of the composite in tension are 21- and 14-percent greater than those of the plain alloy. Compression tests showed that the proportional limit is about 30 percent greater for TMC than for the plain alloy. The enhanced deformation resistance of the TMC was also evident in a series of tensile and compressive stress relaxation tests that were made. Specimens were subjected to tensile or compressive strain amplitudes of 0.75 percent for 24 hr followed by a return to zero strain imposed for 24 hr. The stress relaxation data were normalized with respect to the maximum stress for each case and plotted as a function of time in the following graph. Tensile stresses relaxed 19 percent for the

  5. Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32 Project

    NASA Technical Reports Server (NTRS)

    Fikes, John C.

    2014-01-01

    The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the additively manufactured Inconel 625 injector, two additively manufactured (SLM) water cooled Cu-Cr thrust chamber barrels and one additively manufactured (SLM) water cooled Cu-Cr thrust chamber nozzle on the test stand in Cell 32 and perform hot fire testing of the integrated TCA.

  6. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy.

  7. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy. PMID:27424134

  8. Physical Stress Echocardiography: Prediction of Mortality and Cardiac Events in Patients with Exercise Test showing Ischemia.

    PubMed

    Araujo, Ana Carla Pereira de; Santos, Bruno F de Oliveira; Calasans, Flavia Ricci; Pinto, Ibraim M Francisco; Oliveira, Daniel Pio de; Melo, Luiza Dantas; Andrade, Stephanie Macedo; Tavares, Irlaneide da Silva; Sousa, Antonio Carlos Sobral; Oliveira, Joselina Luzia Menezes

    2014-11-01

    Background: Studies have demonstrated the diagnostic accuracy and prognostic value of physical stress echocardiography in coronary artery disease. However, the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia is limited. Objective: To evaluate the effectiveness of physical stress echocardiography in the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia. Methods: This is a retrospective cohort in which 866 consecutive patients with exercise test positive for myocardial ischemia, and who underwent physical stress echocardiography were studied. Patients were divided into two groups: with physical stress echocardiography negative (G1) or positive (G2) for myocardial ischemia. The endpoints analyzed were all-cause mortality and major cardiac events, defined as cardiac death and non-fatal acute myocardial infarction. Results: G2 comprised 205 patients (23.7%). During the mean 85.6 ± 15.0-month follow-up, there were 26 deaths, of which six were cardiac deaths, and 25 non-fatal myocardial infarction cases. The independent predictors of mortality were: age, diabetes mellitus, and positive physical stress echocardiography (hazard ratio: 2.69; 95% confidence interval: 1.20 - 6.01; p = 0.016). The independent predictors of major cardiac events were: age, previous coronary artery disease, positive physical stress echocardiography (hazard ratio: 2.75; 95% confidence interval: 1.15 - 6.53; p = 0.022) and absence of a 10% increase in ejection fraction. All-cause mortality and the incidence of major cardiac events were significantly higher in G2 (p < 0. 001 and p = 0.001, respectively). Conclusion: Physical stress echocardiography provides additional prognostic information in patients with exercise test positive for myocardial ischemia.Fundamento: Estudos têm demonstrado a acurácia diagnóstica e o valor prognóstico da ecocardiografia com estresse f

  9. Physical Stress Echocardiography: Prediction of Mortality and Cardiac Events in Patients with Exercise Test showing Ischemia.

    PubMed

    Araujo, Ana Carla Pereira de; Santos, Bruno F de Oliveira; Calasans, Flavia Ricci; Pinto, Ibraim M Francisco; Oliveira, Daniel Pio de; Melo, Luiza Dantas; Andrade, Stephanie Macedo; Tavares, Irlaneide da Silva; Sousa, Antonio Carlos Sobral; Oliveira, Joselina Luzia Menezes

    2014-11-01

    Background: Studies have demonstrated the diagnostic accuracy and prognostic value of physical stress echocardiography in coronary artery disease. However, the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia is limited. Objective: To evaluate the effectiveness of physical stress echocardiography in the prediction of mortality and major cardiac events in patients with exercise test positive for myocardial ischemia. Methods: This is a retrospective cohort in which 866 consecutive patients with exercise test positive for myocardial ischemia, and who underwent physical stress echocardiography were studied. Patients were divided into two groups: with physical stress echocardiography negative (G1) or positive (G2) for myocardial ischemia. The endpoints analyzed were all-cause mortality and major cardiac events, defined as cardiac death and non-fatal acute myocardial infarction. Results: G2 comprised 205 patients (23.7%). During the mean 85.6 ± 15.0-month follow-up, there were 26 deaths, of which six were cardiac deaths, and 25 non-fatal myocardial infarction cases. The independent predictors of mortality were: age, diabetes mellitus, and positive physical stress echocardiography (hazard ratio: 2.69; 95% confidence interval: 1.20 - 6.01; p = 0.016). The independent predictors of major cardiac events were: age, previous coronary artery disease, positive physical stress echocardiography (hazard ratio: 2.75; 95% confidence interval: 1.15 - 6.53; p = 0.022) and absence of a 10% increase in ejection fraction. All-cause mortality and the incidence of major cardiac events were significantly higher in G2 (p < 0. 001 and p = 0.001, respectively). Conclusion: Physical stress echocardiography provides additional prognostic information in patients with exercise test positive for myocardial ischemia.Fundamento: Estudos têm demonstrado a acurácia diagnóstica e o valor prognóstico da ecocardiografia com estresse f

  10. 46 CFR 160.035-12 - Additional preapproval tests required for F.R.P. lifeboats.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Additional preapproval tests required for F.R.P... Merchant Vessels § 160.035-12 Additional preapproval tests required for F.R.P. lifeboats. (a) General... p.s.i. of air pressure both before and after the tests described in paragraphs (b)(1) through (6)...

  11. 34 CFR 668.148 - Additional criteria for the approval of certain tests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Additional criteria for the approval of certain tests... of Independently Administered Tests; Specification of Passing Score; Approval of State Process § 668.148 Additional criteria for the approval of certain tests. Except as provided in § 668.143— (a)...

  12. LPT. Shield test facility (TAN646) interior. Addition of third steam ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Shield test facility (TAN-646) interior. Addition of third steam generator. Burner end. Camera facing southwest. Photographer: Comiskey. Date: January 20, 1965. INEEL negative no. 65-242 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  13. How action selection can be embodied: intracranial gamma band recording shows response competition during the Eriksen flankers test

    PubMed Central

    Caruana, Fausto; Uithol, Sebo; Cantalupo, Gaetano; Sartori, Ivana; Lo Russo, Giorgio; Avanzini, Pietro

    2014-01-01

    Recent findings in monkeys suggest that action selection is based on a competition between various action options that are automatically planned by the motor system. Here we discuss data from intracranial EEG recordings in human premotor cortex (PMC) during a bimanual version of the Eriksen flankers test that suggest that the same principles apply to human action decisions. Recording sites in the dorsal PMC show an early but undifferentiated activation, a delayed response that depends on the experimental conditions and, finally, a movement related activation during action execution. Additionally, we found that the medial part of the PMC show a significant increase in response for ipsilateral trials, suggesting a role in inhibiting the wrong response. The ventral PMC seems to be involved in action execution, rather than action selection. Together these findings suggest that the human PMC is part of a network that specifies, selects, and executes actions. PMID:25206328

  14. 34 CFR 668.148 - Additional criteria for the approval of certain tests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... validity as promulgated in the Standards for Educational and Psychological Testing; (ii) Provide test... 34 Education 3 2013-07-01 2013-07-01 false Additional criteria for the approval of certain tests... of Independently Administered Tests; Specification of Passing Score; Approval of State Process §...

  15. 34 CFR 668.148 - Additional criteria for the approval of certain tests.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... validity as promulgated in the Standards for Educational and Psychological Testing; (ii) Provide test... 34 Education 3 2014-07-01 2014-07-01 false Additional criteria for the approval of certain tests... of Independently Administered Tests; Specification of Passing Score; Approval of State Process §...

  16. 34 CFR 668.148 - Additional criteria for the approval of certain tests.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... validity as promulgated in the Standards for Educational and Psychological Testing; (ii) Provide test... 34 Education 3 2012-07-01 2012-07-01 false Additional criteria for the approval of certain tests... of Independently Administered Tests; Specification of Passing Score; Approval of State Process §...

  17. 34 CFR 668.148 - Additional criteria for the approval of certain tests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... validity as promulgated in the Standards for Educational and Psychological Testing; (ii) Provide test... 34 Education 3 2011-07-01 2011-07-01 false Additional criteria for the approval of certain tests... of Independently Administered Tests; Specification of Passing Score; Approval of State Process §...

  18. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 3 Full-scale Test Results

    SciTech Connect

    Gary Blythe

    2007-05-01

    This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, 'Field Testing of a Wet FGD Additive'. The objective of the project is to demonstrate the use of a flue gas desulfurization (FGD) additive, Degussa Corporation's TMT-15, to prevent the reemission of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate whether the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine TMT salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project is conducting pilot- and full-scale tests of the TMT-15 additive in wet FGD absorbers. The tests are intended to determine required additive dosages to prevent Hg{sup 0} reemissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Power River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, TXU Generation Company LP, Southern Company, and Degussa Corporation. TXU Generation has provided the Texas lignite/PRB cofired test site for pilot FGD tests, Monticello Steam Electric Station Unit 3. Southern Company is providing the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot- and full-scale jet bubbling reactor (JBR) FGD systems to be tested. IPL, an AES company, provided the high-sulfur Eastern bituminous coal full-scale FGD test site and cost sharing. Degussa Corporation is providing the TMT-15 additive and technical support to the test program as cost sharing. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing

  19. Acceptance test report: Field test of mixer pump for 241-AN-107 caustic addition project

    SciTech Connect

    Leshikar, G.A.

    1997-05-16

    The field acceptance test of a 75 HP mixer pump (Hazleton serial number N-20801) installed in Tank 241-AN-107 was conducted from October 1995 thru February 1996. The objectives defined in the acceptance test were successfully met, with two exceptions recorded. The acceptance test encompassed field verification of mixer pump turntable rotation set-up and operation, verification that the pump instrumentation functions within established limits, facilitation of baseline data collection from the mixer pump mounted ultrasonic instrumentation, verification of mixer pump water flush system operation and validation of a procedure for its operation, and several brief test runs (bump) of the mixer pump.

  20. 30 CFR 75.151 - Tests for methane; qualified person; additional requirement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Tests for methane; qualified person; additional... Certified Persons § 75.151 Tests for methane; qualified person; additional requirement. Notwithstanding the... methane unless he demonstrates to the satisfaction of an authorized representative of the Secretary...

  1. 30 CFR 75.151 - Tests for methane; qualified person; additional requirement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Tests for methane; qualified person; additional... Certified Persons § 75.151 Tests for methane; qualified person; additional requirement. Notwithstanding the... methane unless he demonstrates to the satisfaction of an authorized representative of the Secretary...

  2. 30 CFR 75.151 - Tests for methane; qualified person; additional requirement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tests for methane; qualified person; additional... Certified Persons § 75.151 Tests for methane; qualified person; additional requirement. Notwithstanding the... methane unless he demonstrates to the satisfaction of an authorized representative of the Secretary...

  3. Testing 1...2...3...: Additional Files Available for Test Information Online.

    ERIC Educational Resources Information Center

    Fabiano, Emily

    1984-01-01

    Reviews databases providing information on published, standardized and unpublished, non-standardized test instruments: Educational Testing Service File, Mental Measurements Yearbook Database, Dissertation Abstracts Online, ERIC, and Psychological Abstracts. Search strategies, search examples, and a summary chart of searchable fields for test…

  4. Florida Defeats the Skeptics: Test Scores Show Genuine Progress in the Sunshine State

    ERIC Educational Resources Information Center

    Winters, Marcus

    2012-01-01

    Among the 50 states, Florida's gains on the National Assessment of Educational Progress (NAEP) between 1992 and 2011 ranked second only to Maryland's. Florida's progress has been particularly impressive in the early grades. In 1998, Florida scored about one grade level below the national average on the 4th-grade NAEP reading test, but it was…

  5. First laboratory perforating tests in coal show lower-than-expected penetration

    SciTech Connect

    Snider, P.M.; Walton, I.C.; Skinner, T.K.; Atwood, D.C.; Grove, B.M.; Graham, C.

    2008-06-15

    Worldwide Coal Bed Methane (CBM) resources are huge, estimated at 3,000 to 9,000 Tcf. The production rate from CBM reservoirs is low, perhaps 50-100 mcf/day. Various completion methods are being evaluated and new technologies are being developed with the aim of increasing production rates. Considering this interest and activity level, little attention has been paid to the CBM completion fundamentals. Perforating is a critical part of this process, especially considering the PRB development migration from single-coal, open-hole completions into multi-zone, cased-hole completions. This paper describes the first known laboratory-testing program to investigate shaped charge penetration in coal targets. We describe mechanical properties of the coals tested, and penetration results for different shaped charges (of different designs), shot at various stress conditions. CT scan and cutaway imaging of the perforation tunnels are also discussed. Tests were conducted under dry and saturated conditions. The preliminary experiments reported here indicate that shaped charge penetration in coal is significantly less than expected, considering the target's density and strength. The authors provide insight into what may be the reasons for these unexpected results and recommend a path forward for shaped charge testing, designs, predictive tools, and how to optimize CBM completions.

  6. D.C. Student Test Scores Show Uneven Progress. Data Snapshot

    ERIC Educational Resources Information Center

    DuPre, Mary

    2011-01-01

    Over the past five years, both DC Public Schools (DCPS) and public charter schools (PCS) have seen significant growth in secondary reading and math scores on the state test known as the District of Columbia Comprehensive Assessment System (DC CAS). However, scores have not improved as much at the elementary level. Reading and math scores for DCPS…

  7. 49 CFR 199.111 - Retention of samples and additional testing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY DRUG AND ALCOHOL TESTING Drug Testing § 199.111 Retention of samples and additional testing. (a) Samples that yield positive results on confirmation must be retained by the laboratory in properly...

  8. Testing with fragrance mix. Is the addition of sorbitan sesquioleate to the constituents useful?

    PubMed

    Frosch, P J; Pilz, B; Burrows, D; Camarasa, J G; Lachapelle, J M; Lahti, A; Menné, T; Wilkinson, J D

    1995-05-01

    In a multicentre study, the value of adding sorbitan sesquioleate (SSO) to the constituents of the 8% fragrance mix (FM) was investigated. In 7 centres, 709 consecutive patients were tested with 2 types of FM from different sources, its 8 constituents with 1% SSO, its 8 constituents without SSO, and 20% SSO. 5 patients (0.71%) reacted to the emulsifier SSO itself, read as definitely allergic on day 3/4. 53 patients reacted to either one of the mixes with an allergic type of reaction. When tested with the constituents without SSO, 41.5% showed an allergic reaction versus 54.7% with SSO. If both types of reactions were considered (allergic and irritant) 38.3% of 73 patients showed a positive "breakdown" result without SSO, versus 54.8% with SSO. The differences were statistically significant. Reactivity to FM constituents was changed in a specific pattern by addition of SSO--irritant reactions increased, particularly for cinnamic alcohol, eugenol, geraniol, oak moss and hydroxycitronellal, whereas others showed only a slight change. Allergic reactions were also increased by SSO, but the rank order of the top 3 sensitizers (isoeugenol, oak moss and eugenol) did not change. Cinnamic alcohol was the only constituent with decreased reactivity after addition of SSO. A positive history of fragrance sensitivity (HFS) was clearly associated with a positive allergic reaction to either the mix or 1 of its constituents (51% versus 28.6% with a negative HFS). Irritant reactions were linked to a negative HFS in a high proportion (64.3%).(ABSTRACT TRUNCATED AT 250 WORDS)

  9. In Vitro and Ex Vivo Testing of Tenofovir Shows It Is Effective As an HIV-1 Microbicide

    PubMed Central

    Rohan, Lisa C.; Moncla, Bernard J.; Kunjara Na Ayudhya, Ratiya Pamela; Cost, Marilyn; Huang, Yunda; Gai, Fang; Billitto, Nicole; Lynam, J. D.; Pryke, Kara; Graebing, Phillip; Hopkins, Nicole; Rooney, James F.; Friend, David; Dezzutti, Charlene S.

    2010-01-01

    Background Tenofovir gel has entered into clinical trials for use as a topical microbicide to prevent HIV-1 infection but has no published data regarding pre-clinical testing using in vitro and ex vivo models. To validate our findings with on-going clinical trial results, we evaluated topical tenofovir gel for safety and efficacy. We also modeled systemic application of tenofovir for efficacy. Methods and Findings Formulation assessment of tenofovir gel included osmolality, viscosity, in vitro release, and permeability testing. Safety was evaluated by measuring the effect on the viability of vaginal flora, PBMCs, epithelial cells, and ectocervical and colorectal explant tissues. For efficacy testing, PBMCs were cultured with tenofovir or vehicle control gels and HIV-1 representing subtypes A, B, and C. Additionally, polarized ectocervical and colorectal explant cultures were treated apically with either gel. Tenofovir was added basolaterally to simulate systemic application. All tissues were challenged with HIV-1 applied apically. Infection was assessed by measuring p24 by ELISA on collected supernatants and immunohistochemistry for ectocervical explants. Formulation testing showed the tenofovir and vehicle control gels were >10 times isosmolar. Permeability through ectocervical tissue was variable but in all cases the receptor compartment drug concentration reached levels that inhibit HIV-1 infection in vitro. The gels were non-toxic toward vaginal flora, PBMCs, or epithelial cells. A transient reduction in epithelial monolayer integrity and epithelial fracture for ectocervical and colorectal explants was noted and likely due to the hyperosmolar nature of the formulation. Tenofovir gel prevented HIV-1 infection of PBMCs regardless of HIV-1 subtype. Topical and systemic tenofovir were effective at preventing HIV-1 infection of explant cultures. Conclusions These studies provide a mechanism for pre-clinical prediction of safety and efficacy of formulated

  10. High-throughput olfactory conditioning and memory retention test show variation in Nasonia parasitic wasps

    PubMed Central

    Hoedjes, K M; Steidle, J L M; Werren, J H; Vet, L E M; Smid, H M

    2012-01-01

    Most of our knowledge on learning and memory formation results from extensive studies on a small number of animal species. Although features and cellular pathways of learning and memory are highly similar in this diverse group of species, there are also subtle differences. Closely related species of parasitic wasps display substantial variation in memory dynamics and can be instrumental to understanding both the adaptive benefit of and mechanisms underlying this variation. Parasitic wasps of the genus Nasonia offer excellent opportunities for multidisciplinary research on this topic. Genetic and genomic resources available for Nasonia are unrivaled among parasitic wasps, providing tools for genetic dissection of mechanisms that cause differences in learning. This study presents a robust, high-throughput method for olfactory conditioning of Nasonia using a host encounter as reward. A T-maze olfactometer facilitates high-throughput memory retention testing and employs standardized odors of equal detectability, as quantified by electroantennogram recordings. Using this setup, differences in memory retention between Nasonia species were shown. In both Nasonia vitripennis and Nasonia longicornis, memory was observed up to at least 5 days after a single conditioning trial, whereas Nasonia giraulti lost its memory after 2 days. This difference in learning may be an adaptation to species-specific differences in ecological factors, for example, host preference. The high-throughput methods for conditioning and memory retention testing are essential tools to study both ultimate and proximate factors that cause variation in learning and memory formation in Nasonia and other parasitic wasp species. PMID:22804968

  11. Improving coeliac disease risk prediction by testing non-HLA variants additional to HLA variants

    PubMed Central

    Romanos, Jihane; Rosén, Anna; Kumar, Vinod; Trynka, Gosia; Franke, Lude; Szperl, Agata; Gutierrez-Achury, Javier; van Diemen, Cleo C; Kanninga, Roan; Jankipersadsing, Soesma A; Steck, Andrea; Eisenbarth, Georges; van Heel, David A; Cukrowska, Bozena; Bruno, Valentina; Mazzilli, Maria Cristina; Núñez, Concepcion; Bilbao, Jose Ramon; Mearin, M Luisa; Barisani, Donatella; Rewers, Marian; Norris, Jill M; Ivarsson, Anneli; Boezen, H Marieke; Liu, Edwin; Wijmenga, Cisca

    2014-01-01

    Background The majority of coeliac disease (CD) patients are not being properly diagnosed and therefore remain untreated, leading to a greater risk of developing CD-associated complications. The major genetic risk heterodimer, HLA-DQ2 and DQ8, is already used clinically to help exclude disease. However, approximately 40% of the population carry these alleles and the majority never develop CD. Objective We explored whether CD risk prediction can be improved by adding non-HLA-susceptible variants to common HLA testing. Design We developed an average weighted genetic risk score with 10, 26 and 57 single nucleotide polymorphisms (SNP) in 2675 cases and 2815 controls and assessed the improvement in risk prediction provided by the non-HLA SNP. Moreover, we assessed the transferability of the genetic risk model with 26 non-HLA variants to a nested case–control population (n=1709) and a prospective cohort (n=1245) and then tested how well this model predicted CD outcome for 985 independent individuals. Results Adding 57 non-HLA variants to HLA testing showed a statistically significant improvement compared to scores from models based on HLA only, HLA plus 10 SNP and HLA plus 26 SNP. With 57 non-HLA variants, the area under the receiver operator characteristic curve reached 0.854 compared to 0.823 for HLA only, and 11.1% of individuals were reclassified to a more accurate risk group. We show that the risk model with HLA plus 26 SNP is useful in independent populations. Conclusions Predicting risk with 57 additional non-HLA variants improved the identification of potential CD patients. This demonstrates a possible role for combined HLA and non-HLA genetic testing in diagnostic work for CD. PMID:23704318

  12. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 5 Full-Scale Test Results

    SciTech Connect

    Gary Blythe; MariJon Owens

    2007-12-01

    This Topical Report summarizes progress on Cooperative Agreement DE-FC26-04NT42309, 'Field Testing of a Wet FGD Additive'. The objective of the project is to demonstrate the use of two flue gas desulfurization (FGD) additives, Evonik Degussa Corporation's TMT-15 and Nalco Company's Nalco 8034, to prevent the re-emission of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project intends to demonstrate whether the additive can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project is conducting pilot- and full-scale tests of the additives in wet FGD absorbers. The tests are intended to determine required additive dosages to prevent Hg{sup 0} re-emissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Powder River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, Luminant Power (was TXU Generation Company LP), Southern Company, IPL (an AES company), Evonik Degussa Corporation and the Nalco Company. Luminant Power has provided the Texas lignite/PRB co-fired test site for pilot FGD tests and cost sharing. Southern Company has provided the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, as well as the pilot- and full-scale jet bubbling reactor (JBR) FGD systems tested. IPL provided the high-sulfur Eastern bituminous coal full-scale FGD test site and cost sharing. Evonik Degussa Corporation is providing the TMT-15 additive, and the Nalco Company is providing the Nalco 8034 additive. Both companies are also supplying technical support to the test program as in-kind cost sharing. The project is being conducted in six tasks. Of the six project tasks, Task 1 involves project planning and Task 6 involves management

  13. Field Testing of a Wet FGD Additive for Enhanced Mercury Control

    SciTech Connect

    Gary Blythe; MariJon Owens

    2007-12-31

    This document is the final report for DOE-NETL Cooperative Agreement DE-FC26-04NT42309, 'Field Testing of a Wet FGD Additive'. The objective of the project has been to demonstrate the use of two flue gas desulfurization (FGD) additives, Evonik Degussa Corporation's TMT-15 and Nalco Company's Nalco 8034, to prevent the re-emission of elemental mercury (Hg{sup 0}) in flue gas exiting wet FGD systems on coal-fired boilers. Furthermore, the project was intended to demonstrate whether such additives can be used to precipitate most of the mercury (Hg) removed in the wet FGD system as a fine salt that can be separated from the FGD liquor and bulk solid byproducts for separate disposal. The project involved pilot- and full-scale tests of the additives in wet FGD absorbers. The tests were intended to determine required additive dosages to prevent Hg{sup 0} re-emissions and to separate mercury from the normal FGD byproducts for three coal types: Texas lignite/Powder River Basin (PRB) coal blend, high-sulfur Eastern bituminous coal, and low-sulfur Eastern bituminous coal. The project team consists of URS Group, Inc., EPRI, Luminant Power (was TXU Generation Company LP), Southern Company, IPL (an AES company), Evonik Degussa Corporation and the Nalco Company. Luminant Power provided the Texas lignite/PRB co-fired test site for pilot FGD tests and project cost sharing. Southern Company provided the low-sulfur Eastern bituminous coal host site for wet scrubbing tests, the pilot- and full-scale jet bubbling reactor (JBR) FGD systems tested, and project cost sharing. IPL provided the high-sulfur Eastern bituminous coal full-scale FGD test site and cost sharing. Evonik Degussa Corporation provided the TMT-15 additive, and the Nalco Company provided the Nalco 8034 additive. Both companies also supplied technical support to the test program as in-kind cost sharing. The project was conducted in six tasks. Of the six tasks, Task 1 involved project planning and Task 6 involved

  14. Determination of the Path Loss from Passenger Electronic Devices to Radio Altimeter with Additional EMI Test

    NASA Astrophysics Data System (ADS)

    Schüür, J.; Nunes, R. R.

    2012-05-01

    Emitters of current and future wireless ultra wideband technology (UWB) inside the cabin should not interfere with any aircraft system. Especially the radio altimeter (RA) system using antennas mounted outside the fuselage is potentially sensitive to UWB devices in the frequency range between 4.1 and 4.8 GHz. The measurement of the interference path loss (IPL) to the RA is therefore of interest and is presented for different aircraft. The need of a high dynamic setup with low parasitic coupling in the IPL measurement is stressed. In addition, electromagnetic interference (EMI) tests with different transmitted signals are made, showing that the susceptibility of the RA system actually increases with UWB modulation.

  15. Testing an Emerging Paradigm in Migration Ecology Shows Surprising Differences in Efficiency between Flight Modes

    PubMed Central

    Duerr, Adam E.; Miller, Tricia A.; Lanzone, Michael; Brandes, Dave; Cooper, Jeff; O'Malley, Kieran; Maisonneuve, Charles; Tremblay, Junior; Katzner, Todd

    2012-01-01

    To maximize fitness, flying animals should maximize flight speed while minimizing energetic expenditure. Soaring speeds of large-bodied birds are determined by flight routes and tradeoffs between minimizing time and energetic costs. Large raptors migrating in eastern North America predominantly glide between thermals that provide lift or soar along slopes or ridgelines using orographic lift (slope soaring). It is usually assumed that slope soaring is faster than thermal gliding because forward progress is constant compared to interrupted progress when birds pause to regain altitude in thermals. We tested this slope-soaring hypothesis using high-frequency GPS-GSM telemetry devices to track golden eagles during northbound migration. In contrast to expectations, flight speed was slower when slope soaring and eagles also were diverted from their migratory path, incurring possible energetic costs and reducing speed of progress towards a migratory endpoint. When gliding between thermals, eagles stayed on track and fast gliding speeds compensated for lack of progress during thermal soaring. When thermals were not available, eagles minimized migration time, not energy, by choosing energetically expensive slope soaring instead of waiting for thermals to develop. Sites suited to slope soaring include ridges preferred for wind-energy generation, thus avian risk of collision with wind turbines is associated with evolutionary trade-offs required to maximize fitness of time-minimizing migratory raptors. PMID:22558166

  16. Testing an emerging paradigm in migration ecology shows surprising differences in efficiency between flight modes.

    PubMed

    Duerr, Adam E; Miller, Tricia A; Lanzone, Michael; Brandes, Dave; Cooper, Jeff; O'Malley, Kieran; Maisonneuve, Charles; Tremblay, Junior; Katzner, Todd

    2012-01-01

    To maximize fitness, flying animals should maximize flight speed while minimizing energetic expenditure. Soaring speeds of large-bodied birds are determined by flight routes and tradeoffs between minimizing time and energetic costs. Large raptors migrating in eastern North America predominantly glide between thermals that provide lift or soar along slopes or ridgelines using orographic lift (slope soaring). It is usually assumed that slope soaring is faster than thermal gliding because forward progress is constant compared to interrupted progress when birds pause to regain altitude in thermals. We tested this slope-soaring hypothesis using high-frequency GPS-GSM telemetry devices to track golden eagles during northbound migration. In contrast to expectations, flight speed was slower when slope soaring and eagles also were diverted from their migratory path, incurring possible energetic costs and reducing speed of progress towards a migratory endpoint. When gliding between thermals, eagles stayed on track and fast gliding speeds compensated for lack of progress during thermal soaring. When thermals were not available, eagles minimized migration time, not energy, by choosing energetically expensive slope soaring instead of waiting for thermals to develop. Sites suited to slope soaring include ridges preferred for wind-energy generation, thus avian risk of collision with wind turbines is associated with evolutionary trade-offs required to maximize fitness of time-minimizing migratory raptors.

  17. Testing an emerging paradigm in migration ecology shows surprising differences in efficiency between flight modes.

    PubMed

    Duerr, Adam E; Miller, Tricia A; Lanzone, Michael; Brandes, Dave; Cooper, Jeff; O'Malley, Kieran; Maisonneuve, Charles; Tremblay, Junior; Katzner, Todd

    2012-01-01

    To maximize fitness, flying animals should maximize flight speed while minimizing energetic expenditure. Soaring speeds of large-bodied birds are determined by flight routes and tradeoffs between minimizing time and energetic costs. Large raptors migrating in eastern North America predominantly glide between thermals that provide lift or soar along slopes or ridgelines using orographic lift (slope soaring). It is usually assumed that slope soaring is faster than thermal gliding because forward progress is constant compared to interrupted progress when birds pause to regain altitude in thermals. We tested this slope-soaring hypothesis using high-frequency GPS-GSM telemetry devices to track golden eagles during northbound migration. In contrast to expectations, flight speed was slower when slope soaring and eagles also were diverted from their migratory path, incurring possible energetic costs and reducing speed of progress towards a migratory endpoint. When gliding between thermals, eagles stayed on track and fast gliding speeds compensated for lack of progress during thermal soaring. When thermals were not available, eagles minimized migration time, not energy, by choosing energetically expensive slope soaring instead of waiting for thermals to develop. Sites suited to slope soaring include ridges preferred for wind-energy generation, thus avian risk of collision with wind turbines is associated with evolutionary trade-offs required to maximize fitness of time-minimizing migratory raptors. PMID:22558166

  18. Comparative ergoespirometric adaptations to a treadmill exercise test in untrained show Andalusian and Arabian horses.

    PubMed

    Castejón-Riber, Cristina; Muñoz, Ana; Trigo, Pablo; Riber, Cristina; Santisteban, Rafael; Castejón, Francisco

    2012-03-01

    Significant differences exist in the respiratory adaptation to exercise in different equine breeds. This research describes the ergoespirometric response to exercise of Andalusian (AN) and Arabian (A) horses, both selected according to morphological criteria. Thirteen untrained male horses (6 AN and 7 A) performed a treadmill exercise test (TET) with a slope of 6%, with workloads starting from 5 m/s and increasing 1 m/s every 3 min until the horses were not able to keep the required velocity. Tidal volume (TV), respiratory rate, minute ventilation (VE), oxygen uptake (VO2), carbon dioxide production, peak oxygen uptake (VO2peak), respiratory exchange ratio (RER), exercise time to fatigue (ETF) and respiratory aerobic threshold (RAT) were determined. AN horses presented higher TV and VE, whereas respiratory rate, VO2 and VCO2 were lower at the same velocities. RER was similar between breeds. ETF was longer in A horses (556.7 ± 66.5 in AN vs. 607.1 ± 71.1 s in A) and no significant differences were found in RAT (5.50 ± 0.50 in AN vs. 5.86 ± 1.07 m/s in A). In summary, despite the more intense ventilatory response to exercise at the same velocity, AN horses had lower VO2. The AN horse develops a more intense ventilatory response to fixed velocities than the A horse and it could be interesting to clarify the role of the locomotion characteristics in this response.

  19. Comparative ergoespirometric adaptations to a treadmill exercise test in untrained show Andalusian and Arabian horses.

    PubMed

    Castejón-Riber, Cristina; Muñoz, Ana; Trigo, Pablo; Riber, Cristina; Santisteban, Rafael; Castejón, Francisco

    2012-03-01

    Significant differences exist in the respiratory adaptation to exercise in different equine breeds. This research describes the ergoespirometric response to exercise of Andalusian (AN) and Arabian (A) horses, both selected according to morphological criteria. Thirteen untrained male horses (6 AN and 7 A) performed a treadmill exercise test (TET) with a slope of 6%, with workloads starting from 5 m/s and increasing 1 m/s every 3 min until the horses were not able to keep the required velocity. Tidal volume (TV), respiratory rate, minute ventilation (VE), oxygen uptake (VO2), carbon dioxide production, peak oxygen uptake (VO2peak), respiratory exchange ratio (RER), exercise time to fatigue (ETF) and respiratory aerobic threshold (RAT) were determined. AN horses presented higher TV and VE, whereas respiratory rate, VO2 and VCO2 were lower at the same velocities. RER was similar between breeds. ETF was longer in A horses (556.7 ± 66.5 in AN vs. 607.1 ± 71.1 s in A) and no significant differences were found in RAT (5.50 ± 0.50 in AN vs. 5.86 ± 1.07 m/s in A). In summary, despite the more intense ventilatory response to exercise at the same velocity, AN horses had lower VO2. The AN horse develops a more intense ventilatory response to fixed velocities than the A horse and it could be interesting to clarify the role of the locomotion characteristics in this response. PMID:22183731

  20. A test strategy for the assessment of additive attributed toxicity of tobacco products.

    PubMed

    Kienhuis, Anne S; Staal, Yvonne C M; Soeteman-Hernández, Lya G; van de Nobelen, Suzanne; Talhout, Reinskje

    2016-08-01

    The new EU Tobacco Product Directive (TPD) prohibits tobacco products containing additives that are toxic in unburnt form or that increase overall toxicity of the product. This paper proposes a strategy to assess additive attributed toxicity in the context of the TPD. Literature was searched on toxicity testing strategies for regulatory purposes from tobacco industry and governmental institutes. Although mainly traditional in vivo testing strategies have been applied to assess toxicity of unburnt additives and increases in overall toxicity of tobacco products due to additives, in vitro tests combined with toxicogenomics and validated using biomarkers of exposure and disease are most promising in this respect. As such, tests are needed that are sensitive enough to assess additive attributed toxicity above the overall toxicity of tobacco products, which can associate assay outcomes to human risk and exposure. In conclusion, new, sensitive in vitro assays are needed to conclude whether comparable testing allows for assessment of small changes in overall toxicity attributed to additives. A more pragmatic approach for implementation on a short-term is mandated lowering of toxic emission components. Combined with risk assessment, this approach allows assessment of effectiveness of harm reduction strategies, including banning or reducing of additives.

  1. SOD1 aggregation in ALS mice shows simplistic test tube behavior

    PubMed Central

    Lang, Lisa; Zetterström, Per; Brännström, Thomas; Marklund, Stefan L.; Danielsson, Jens; Oliveberg, Mikael

    2015-01-01

    A longstanding challenge in studies of neurodegenerative disease has been that the pathologic protein aggregates in live tissue are not amenable to structural and kinetic analysis by conventional methods. The situation is put in focus by the current progress in demarcating protein aggregation in vitro, exposing new mechanistic details that are now calling for quantitative in vivo comparison. In this study, we bridge this gap by presenting a direct comparison of the aggregation kinetics of the ALS-associated protein superoxide dismutase 1 (SOD1) in vitro and in transgenic mice. The results based on tissue sampling by quantitative antibody assays show that the SOD1 fibrillation kinetics in vitro mirror with remarkable accuracy the spinal cord aggregate buildup and disease progression in transgenic mice. This similarity between in vitro and in vivo data suggests that, despite the complexity of live tissue, SOD1 aggregation follows robust and simplistic rules, providing new mechanistic insights into the ALS pathology and organism-level manifestation of protein aggregation phenomena in general. PMID:26221023

  2. Acceptance test report for the 241-AN-107 caustic addition mixer pump data logger

    SciTech Connect

    Dowell, J.L.

    1996-04-05

    The Acceptance Test Procedure for the 241-AN-107 Caustic Addition Mixer Pump Data logger, WHC-SD-WM-ATP-149, was started on September 25, 1995, and completed November 13, 1995. K.G. Carothers of Tank Waste Remediation Engineering requested the test procedure and ICF Kaiser Control Systems Engineering group wrote the test procedure and executed it at the 305 building in 300 area and at the 241-AN Tank Farm in 200 East area. The purpose of this report is to document that the Caustic addition Mixer Pump Data logger, functioned as intended as installed at 241-AN-107 tank farm.

  3. Leach testing of in situ stabilization grouts containing additives to sequester contaminants

    SciTech Connect

    Serne, R.J.; Ames, L.L.; Martin, P.F.C.; LeGore, V.L.; Lindenmeier, C.W. ); Phillips, S.J. )

    1993-04-01

    This document discusses laboratory testing performed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC) of special grout formulations that incorporate specific sequestering agents to help improve the ability of the cement to resist contaminant leaching. To enhance the sequestering of contaminants we chose five additives to introduce (singly) to the control cement. The additives were Florida pebble phosphate, clinoptilolite (a natural zeolite), ferrous sulfide (a reductant), a mixed bed organic ion exchange resin and a proprietary anion-adsorbing mixed metal oxide. These additives were added one per test to the standard formulation and used to encapsulate a diluted high-salt alkaline liquid waste that is produced after various processes to remove uranium and plutonium from spent nuclear fuel. This report documents the testing of these additives.

  4. Hybrid Residual Flexibility/Mass-Additive Method for Structural Dynamic Testing

    NASA Technical Reports Server (NTRS)

    Tinker, M. L.

    2003-01-01

    A large fixture was designed and constructed for modal vibration testing of International Space Station elements. This fixed-base test fixture, which weighs thousands of pounds and is anchored to a massive concrete floor, initially utilized spherical bearings and pendulum mechanisms to simulate Shuttle orbiter boundary constraints for launch of the hardware. Many difficulties were encountered during a checkout test of the common module prototype structure, mainly due to undesirable friction and excessive clearances in the test-article-to-fixture interface bearings. Measured mode shapes and frequencies were not representative of orbiter-constrained modes due to the friction and clearance effects in the bearings. As a result, a major redesign effort for the interface mechanisms was undertaken. The total cost of the fixture design, construction and checkout, and redesign was over $2 million. Because of the problems experienced with fixed-base testing, alternative free-suspension methods were studied, including the residual flexibility and mass-additive approaches. Free-suspension structural dynamics test methods utilize soft elastic bungee cords and overhead frame suspension systems that are less complex and much less expensive than fixed-base systems. The cost of free-suspension fixturing is on the order of tens of thousands of dollars as opposed to millions, for large fixed-base fixturing. In addition, free-suspension test configurations are portable, allowing modal tests to be done at sites without modal test facilities. For example, a mass-additive modal test of the ASTRO-1 Shuttle payload was done at the Kennedy Space Center launch site. In this Technical Memorandum, the mass-additive and residual flexibility test methods are described in detail. A discussion of a hybrid approach that combines the best characteristics of each method follows and is the focus of the study.

  5. A case of vasospastic angina showing resolution of coronary vasospasm in acetylcholine provocation test corresponding to regression of coronary atherosclerosis.

    PubMed

    Tani, Shigemasa; Watanabe, Ikuyoshi; Anazawa, Takeo; Kawamata, Hirofumi; Tachibana, Eizo; Fuji, Takeshi; Matsumoto, Michiaki; Onikura, Motoyuki; Sato, Yuichi; Nagao, Ken; Kanmatsuse, Katsuo; Kushiro, Toshio; Hirayama, Atsushi

    2008-03-28

    We experienced a case of vasospastic angina showing resolution of vasospasm in the acetylcholine provocation test corresponding to regression of coronary atherosclerotic plaque following treatment with a combination of benidipine and pravastatin.

  6. Slug tests in wells screened across the water table: some additional considerations.

    PubMed

    Butler, J J

    2014-01-01

    The majority of slug tests done at sites of shallow groundwater contamination are performed in wells screened across the water table and are affected by mechanisms beyond those considered in the standard slug-test models. These additional mechanisms give rise to a number of practical issues that are yet to be fully resolved; four of these are addressed here. The wells in which slug tests are performed were rarely installed for that purpose, so the well design can result in problematic (small signal to noise ratio) test data. The suitability of a particular well design should thus always be assessed prior to field testing. In slug tests of short duration, it can be difficult to identify which portion of the test represents filter-pack drainage and which represents formation response; application of a mass balance can help confirm that test phases have been correctly identified. A key parameter required for all slug test models is the casing radius. However, in this setting, the effective casing radius (borehole radius corrected for filter-pack porosity), not the nominal well radius, is required; this effective radius is best estimated directly from test data. Finally, although conventional slug-test models do not consider filter-pack drainage, these models will yield reasonable hydraulic conductivity estimates when applied to the formation-response phase of a test from an appropriately developed well.

  7. [An additional test in the identification of Enterobacteriaceae and some representatives of the genus Vibrio].

    PubMed

    Bril'man, Ia E

    1995-01-01

    An additional test: aerobic redox fermentation in semiliquid Hiss' medium with mannitol is recommended for the indication of Enterobacteriaceae, Vibrio, etc. The majority of mannite-fermenting enterobacteria change the color of the indicator in a thin upper layer of a column of semiliquid Hiss' medium in comparison with the bulk of medium after 20-24 h growth in it. Such changes of the indicator are never observed with Shigella, Salmonella, Vibrio bacteria of the studied strains, Yersinia, some cocci, etc., which may be considered as an additional differential diagnostic test at early stages of investigation with due consideration for other known signs. The aerobic redox test does not require additional quantities of nutrient media, reagents, or glassware.

  8. Instructions for additional qualitative scoring of the initial-letter Word-association Test.

    PubMed

    Zivković, M

    1994-04-01

    An additional scoring method is based on grouping test-words according to whether the same sign is given by subjects to the test-words. In this way five test-word categories are formed, Eros (test-words with double plus signs), demi-Eros (single plus sign), demi-Thanatos (single minus), Thanatos (double minus), and Deviant (+/- and theta signs). The next step in scoring is to count the number of test-words in a given scoring category whose meanings do not conform. The greater the discrepancy between the test-word category and its meaning, the less well adapted is the subject. Several illustrative protocols are discussed. PMID:8022674

  9. Aerobic and anaerobic in vitro testing of feed additives claiming to detoxify deoxynivalenol and zearalenone.

    PubMed

    Hahn, Irene; Kunz-Vekiru, Elisavet; Twarużek, Magdalena; Grajewski, Jan; Krska, Rudolf; Berthiller, Franz

    2015-01-01

    Deoxynivalenol (DON) and zearalenone (ZEN) are mycotoxins produced by fungi of the genus Fusarium which frequently contaminate maize and grain cereals. Mycotoxin-contaminated feed endangers animal health and leads to economic losses in animal production. Several mycotoxin elimination strategies, including the use of commercially available DON and ZEN detoxifying agents, have been developed. However, frequently there is no scientific proof of the efficacy of such adsorbents and degrading products. We therefore tested 20 commercially available products claiming to detoxify DON and/or ZEN either by biodegradation (4 products) or a combination of degradation and adsorption (16 products) under aerobic and anaerobic conditions at approx. pH 7. Under the applied conditions, a complete reduction of DON and consequent formation of the known non-toxic metabolite DOM-1 was exclusively observed in samples taken from the anaerobic degradation experiment of one product. For all other products, incubated under aerobic and anaerobic conditions, a maximum DON reduction of 17% after 72 h of incubation was detected. Aerobic and anaerobic incubation of only one tested product resulted in complete ZEN reduction as well as in the formation of the less-toxic metabolites DHZEN and HZEN. With this product, 68-97% of the toxin was metabolised within 3 h. After 24 h, a ZEN reduction ≥ 60% was obtained with four additional products during aerobic incubation only. Six of the 20 investigated products produced α- and/or β-ZEL, which are metabolites showing similar oestrogenic activity compared to ZEN. Aerobic and anaerobic degradation to unknown metabolites with unidentified toxicity was obtained with 10 and 3 products, respectively. The results of our study demonstrate the importance of in vitro experiments to critically screen agents claiming mycotoxin detoxification.

  10. Evaluation of laser ultrasonic testing for inspection of metal additive manufacturing

    NASA Astrophysics Data System (ADS)

    Everton, Sarah; Dickens, Phill; Tuck, Chris; Dutton, Ben

    2015-03-01

    Additive Manufacturing (AM) offers a number of benefits over conventional processes. However, in order for these benefits to be realised, further development and integration of suitable monitoring and closed loop control systems are needed. Laser Ultrasonic Testing (LUT) is an inspection technology which shows potential for in-situ monitoring of metallic AM processes. Non-contact measurements can be performed on curved surfaces and in difficult to reach areas, even at elevated temperatures. Interrogation of each build layer generates defect information which can be used to highlight processing errors and allow for real-time modification of processing parameters, enabling improved component quality and yield. This study evaluates the use of laser-generated surface waves to detect artificially generated defects in titanium alloy (Ti- 6Al-4V) samples produced by laser-based Powder Bed Fusion. The trials undertaken utilise the latest LUT equipment, recently installed at Manufacturing Technology Centre which is capable of being controlled remotely. This will allow the system to optimise or adapt "on-the-fly", simplifying the eventual integration of the system within an AM machine.

  11. Aortic arch calcification on chest X-ray combined with coronary calcium score show additional benefit for diagnosis and outcome in patients with angina

    PubMed Central

    Woo, Jong Shin; Kim, Weon; Kwon, Se Hwan; Youn, Hyo Chul; Kim, Hyun Soo; Kim, Jin Bae; Kim, Soo Joong; Kim, Woo-Shik; Kim, Kwon Sam

    2016-01-01

    Background The coronary artery calcium (CAC) and aortic arch calcification (AoAC) are individually associated with cardiovascular disease and outcome. This study investigated the predictive value of AoAC combined with CAC for cardiovascular diagnosis and outcome in patients with angina. Methods A total of 2018 stable angina patients who underwent chest X-ray and cardiac multi-detector computed tomography were followed up for four years to assess adverse events, which were categorized as cardiac death, stroke, myocardial infarction, or repeated revascularization. The extent of AoAC on chest X-ray was graded on a scale from 0 to 3. Results During the four years of follow-up, 620 patients were treated by coronary stenting and 153 (7%) adverse events occurred. A higher grade of AoAC was associated with a higher CAC score. Cox regression showed that the CAC score, but not AoAC, were associated with adverse events. In patients with CAC score < 400, AoAC showed an additive predictive value in detecting significant coronary artery disease (CAD). A gradual increases in the risk of adverse events were noted if AoAC was present in patients with similar CAC score. Conclusions As AoAC is strongly correlated with the CAC score regardless of age or gender, careful evaluation of CAD would be required in patients with AoAC on conventional chest X-rays. PMID:27103916

  12. Testing for departures from additivity in mixtures of perfluoroalkyl acids (PFAAs)

    EPA Science Inventory

    This study is a follow-up to a paper by Carr, et al. that determined a design structure to optimally test for departures from additivity in a fixed ratio mixture of four perfluoroalkyl acids (PFAAs) using an in vitro transiently-transfected COS- 1 PPARa reporter model with an NHA...

  13. 30 CFR 77.102 - Tests for methane; oxygen deficiency; qualified person, additional requirement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Tests for methane; oxygen deficiency; qualified... methane; oxygen deficiency; qualified person, additional requirement. Notwithstanding the provisions of... and oxygen deficiency unless he has demonstrated to the satisfaction of an authorized...

  14. 30 CFR 77.102 - Tests for methane; oxygen deficiency; qualified person, additional requirement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Tests for methane; oxygen deficiency; qualified... methane; oxygen deficiency; qualified person, additional requirement. Notwithstanding the provisions of... and oxygen deficiency unless he has demonstrated to the satisfaction of an authorized...

  15. 30 CFR 77.102 - Tests for methane; oxygen deficiency; qualified person, additional requirement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Tests for methane; oxygen deficiency; qualified... methane; oxygen deficiency; qualified person, additional requirement. Notwithstanding the provisions of... and oxygen deficiency unless he has demonstrated to the satisfaction of an authorized...

  16. 30 CFR 77.102 - Tests for methane; oxygen deficiency; qualified person, additional requirement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tests for methane; oxygen deficiency; qualified... methane; oxygen deficiency; qualified person, additional requirement. Notwithstanding the provisions of... and oxygen deficiency unless he has demonstrated to the satisfaction of an authorized...

  17. 30 CFR 77.102 - Tests for methane; oxygen deficiency; qualified person, additional requirement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Tests for methane; oxygen deficiency; qualified... methane; oxygen deficiency; qualified person, additional requirement. Notwithstanding the provisions of... and oxygen deficiency unless he has demonstrated to the satisfaction of an authorized...

  18. Metrology test object for dimensional verification in additive manufacturing of metals for biomedical applications.

    PubMed

    Teeter, Matthew G; Kopacz, Alexander J; Nikolov, Hristo N; Holdsworth, David W

    2015-01-01

    Additive manufacturing continues to increase in popularity and is being used in applications such as biomaterial ingrowth that requires sub-millimeter dimensional accuracy. The purpose of this study was to design a metrology test object for determining the capabilities of additive manufacturing systems to produce common objects, with a focus on those relevant to medical applications. The test object was designed with a variety of features of varying dimensions, including holes, cylinders, rectangles, gaps, and lattices. The object was built using selective laser melting, and the produced dimensions were compared to the target dimensions. Location of the test objects on the build plate did not affect dimensions. Features with dimensions less than 0.300 mm did not build or were overbuilt to a minimum of 0.300 mm. The mean difference between target and measured dimensions was less than 0.100 mm in all cases. The test object is applicable to multiple systems and materials, tests the effect of location on the build, uses a minimum of material, and can be measured with a variety of efficient metrology tools (including measuring microscopes and micro-CT). Investigators can use this test object to determine the limits of systems and adjust build parameters to achieve maximum accuracy.

  19. Metrology test object for dimensional verification in additive manufacturing of metals for biomedical applications.

    PubMed

    Teeter, Matthew G; Kopacz, Alexander J; Nikolov, Hristo N; Holdsworth, David W

    2015-01-01

    Additive manufacturing continues to increase in popularity and is being used in applications such as biomaterial ingrowth that requires sub-millimeter dimensional accuracy. The purpose of this study was to design a metrology test object for determining the capabilities of additive manufacturing systems to produce common objects, with a focus on those relevant to medical applications. The test object was designed with a variety of features of varying dimensions, including holes, cylinders, rectangles, gaps, and lattices. The object was built using selective laser melting, and the produced dimensions were compared to the target dimensions. Location of the test objects on the build plate did not affect dimensions. Features with dimensions less than 0.300 mm did not build or were overbuilt to a minimum of 0.300 mm. The mean difference between target and measured dimensions was less than 0.100 mm in all cases. The test object is applicable to multiple systems and materials, tests the effect of location on the build, uses a minimum of material, and can be measured with a variety of efficient metrology tools (including measuring microscopes and micro-CT). Investigators can use this test object to determine the limits of systems and adjust build parameters to achieve maximum accuracy. PMID:25542613

  20. Na+ and Cl(-) ions show additive effects under NaCl stress on induction of oxidative stress and the responsive antioxidative defense in rice.

    PubMed

    Khare, Tushar; Kumar, Vinay; Kishor, P B Kavi

    2015-07-01

    Despite the fact that when subjected to salinity stress most plants accumulate high concentrations of sodium (Na(+)) and chloride (Cl(-)) ions in their tissues, major research has however been focused on the toxic effects of Na(+). Consequently, Cl(-) toxicity mechanisms in annual plants, particularly in inducing oxidative stress, are poorly understood. Here, the extent to which Na(+) and/or Cl(-) ions contribute in inducing oxidative stress and regulating the adaptive antioxidant defense is shown in two Indica rice genotypes differing in their salt tolerance. Equimolar (100 mM) concentrations of Na(+), Cl(-), and NaCl (EC ≈ 10 dS m(-1)) generated free-radical (O2 (•-), (•)OH) and non-radical (H2O2) forms of reactive oxygen species (ROS) and triggered cell death in leaves of 21-day-old hydroponically grown rice seedlings as evident by spectrophotometric quantifications and histochemical visualizations. The magnitude of ROS-mediated oxidative damage was higher in sensitive cultivar, whereas NaCl proved to be most toxic among the treatments. Salt treatments significantly increased activities of antioxidant enzymes and their isozymes including superoxide dismutase, catalase, peroxidase, ascorbate peroxidase, and glutathione reductase. Na(+) and Cl(-) ions showed additive effects under NaCl in activating the antioxidant enzyme machinery, and responses were more pronounced in tolerant cultivar. The expression levels of SodCc2, CatA, and OsPRX1 genes were largely consistent with the activities of their corresponding enzymes. Salt treatments caused an imbalance in non-enzymatic antioxidants ascorbic acid, α-tocopherol, and polyphenols, with greater impacts under NaCl than Na(+) and Cl(-) separately. Results revealed that though Cl(-) was relatively less toxic than its counter-cation, its effects cannot be totally ignored. Both the cultivars responded in the same manner, but the tolerant cultivar maintained lower Na(+)/K(+) and ROS levels coupled with better

  1. Formulation and Testing of Paraffin-Based Solid Fuels Containing Energetic Additives for Hybrid Rockets

    NASA Technical Reports Server (NTRS)

    Larson, Daniel B.; Boyer, Eric; Wachs,Trevor; Kuo, Kenneth K.; Story, George

    2012-01-01

    Many approaches have been considered in an effort to improve the regression rate of solid fuels for hybrid rocket applications. One promising method is to use a fuel with a fast burning rate such as paraffin wax; however, additional performance increases to the fuel regression rate are necessary to make the fuel a viable candidate to replace current launch propulsion systems. The addition of energetic and/or nano-sized particles is one way to increase mass-burning rates of the solid fuels and increase the overall performance of the hybrid rocket motor.1,2 Several paraffin-based fuel grains with various energetic additives (e.g., lithium aluminum hydride (LiAlH4) have been cast in an attempt to improve regression rates. There are two major advantages to introducing LiAlH4 additive into the solid fuel matrix: 1) the increased characteristic velocity, 2) decreased dependency of Isp on oxidizer-to-fuel ratio. The testing and characterization of these solid-fuel grains have shown that continued work is necessary to eliminate unburned/unreacted fuel in downstream sections of the test apparatus.3 Changes to the fuel matrix include higher melting point wax and smaller energetic additive particles. The reduction in particle size through various methods can result in more homogeneous grain structure. The higher melting point wax can serve to reduce the melt-layer thickness, allowing the LiAlH4 particles to react closer to the burning surface, thus increasing the heat feedback rate and fuel regression rate. In addition to the formulation of LiAlH4 and paraffin wax solid-fuel grains, liquid additives of triethylaluminum and diisobutylaluminum hydride will be included in this study. Another promising fuel formulation consideration is to incorporate a small percentage of RDX as an additive to paraffin. A novel casting technique will be used by dissolving RDX in a solvent to crystallize the energetic additive. After dissolving the RDX in a solvent chosen for its compatibility

  2. Influence of compost addition on lead and arsenic bioavailability in reclaimed orchard soil assessed using Porcellio scaber bioaccumulation test.

    PubMed

    Udovic, M; McBride, M B

    2012-02-29

    Long-term application of lead arsenate in orchards has led to a significant accumulation of Pb and As in the topsoil. Reclamation of old orchards for agricultural purposes entails the exposure of humans to Pb and As, which can be reduced by adequate remediation actions. In this study, we assessed the remediation efficiency of compost addition, commonly used as a sustainable agricultural practice, in decreasing the human exposure Pb and As by direct ingestion. The remediation was evaluated based on Pb and As bioavailability, assessed by means of a selective non-exhaustive chemical extraction (modified Morgan extraction, MME), with a physiologically based extraction test (PBET) for the assessment of Pb and As bioavailability in ingested soils and with a novel in vivo bioaccumulation test with isopods (Porcellio scaber). All the tests showed that compost addition consistently reduced Pb, but increased As potential bioavailability. The bioaccumulation test with P. scaber was sensitive to changes in Pb and As bioavailability in test soils. However, the results indicate that the bioavailability of As could be under- or overestimated using solely chemical extraction tests. Indirect assessment of trace metal bioavailability with bioaccumulation in isopods can be used as complementary source of data to the existing in vitro chemical extraction test approach for the estimation of human exposure to trace elements in polluted and remediated soil. This is the first report on the use of As accumulation in P. scaber as a tool for the assessment of As bioavailability in contaminated orchard soil.

  3. Avoiding Split Attention in Computer-Based Testing: Is Neglecting Additional Information Facilitative?

    ERIC Educational Resources Information Center

    Jarodzka, Halszka; Janssen, Noortje; Kirschner, Paul A.; Erkens, Gijsbert

    2015-01-01

    This study investigated whether design guidelines for computer-based learning can be applied to computer-based testing (CBT). Twenty-two students completed a CBT exam with half of the questions presented in a split-screen format that was analogous to the original paper-and-pencil version and half in an integrated format. Results show that students…

  4. Automated microbial metabolism laboratory. [design of advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into test chambers

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The design and rationale of an advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into each of four test chambers are outlined. The feasibility for multiple addition tests was established and various details of the methodology were studied. The four chamber battery of tests include: (1) determination of the effect of various atmospheric gases and selection of that gas which produces an optimum response; (2) determination of the effect of incubation temperature and selection of the optimum temperature for performing Martian biochemical tests; (3) sterile soil is dosed with a battery of C-14 labeled substrates and subjected to experimental temperature range; and (4) determination of the possible inhibitory effects of water on Martian organisms is performed initially by dosing with 0.01 ml and 0.5 ml of medium, respectively. A series of specifically labeled substrates are then added to obtain patterns in metabolic 14CO2 (C-14)O2 evolution.

  5. Maps showing mines, quarries, oil and gas activity, and sample localities in and near the Sipsey Wilderness and additions, Lawrence and Winston Counties, Alabama

    SciTech Connect

    Mory, P.C.; Behum, P.T.; Ross, R.B. Jr.

    1982-01-01

    This report presents the results of a mineral survey of the Sipsey Wilderness and additions, William B. Bankhead National Forest, Lawrence and Winston Counties, Alabama. The survey includes: limestone quarrying, coal mining, and oil and gas activity. 7 references, 5 figures, 2 tables.

  6. Positive contrast in the rat: a test of the additivity theory.

    PubMed

    Nallan, G B; McCoy, D F

    1979-09-01

    Rats were trained to lever press for food on a multiple variable-interval variable-interval schedule, then shifted to a multiple variable-interval extinction schedule. For six subjects (group L), schedule components were signalled by the presence or absence of a flashing light emitted from an alternate, "signal" lever. For four subjects (group T), schedule components were signalled by two distinct auditory tones. Contrary to the predictions of an additivity theory based on the summation of response classes, contacts on the signal lever did not increase after the schedule shift in group L. However, nine of the ten subjects in the study demonstrated positive contrast effects on the operant lever. In a subsequent test for stimulus control, enhancement and suppression by the discriminative stimuli were found in these same nine subjects. An additivity theory based on the summation of excitatory processes, rather than response classes, appears to account for these data.

  7. Compositions, Functions, and Testing of Friction Brake Materials and Their Additives

    SciTech Connect

    Blau, PJ

    2001-10-22

    The purpose of this report is to present a survey of commercial brake materials and additives, and to indicate their typical properties and functions, especially as regards their use in heavy trucks. Most truck pad and shoe materials described here were designed to wear against cast iron. Brake material test methods are also briefly described. This report does not address issues associated with the fabrication and manufacturing of brake materials. Since there are literally thousands of brake material additives, and their combinations are nearly limitless, it is impractical to list them all here. Rather, an attempt has been made to capture the primary constituents and their functions. An Appendix contains thermo-physical properties of some current and potential brake materials.

  8. The use of the rapid osmotic fragility test as an additional test to diagnose canine immune-mediated haemolytic anaemia

    PubMed Central

    2013-01-01

    practice. Although, the ROFT cannot replace other diagnostic tests, it may be a valuable additional tool to diagnose canine IMHA. PMID:24160183

  9. Application and testing of additive manufacturing for mirrors and precision structures

    NASA Astrophysics Data System (ADS)

    Sweeney, Michael; Acreman, Martyn; Vettese, Tom; Myatt, Ray; Thompson, Mike

    2015-09-01

    Additive Manufacturing (aka AM, and 3-D printing) is widely touted in the media as the foundation for the next industrial revolution. Beneath the hype, AM does indeed offer profound advantages in lead-time, dramatically reduced consumption of expensive raw materials, while enabling new and innovative design forms that cannot be produced by other means. General Dynamics and their industry partners have begun to embrace this technology for mirrors and precision structures used in the aerospace, defense, and precision optical instrumentation industries. Aggressively lightweighted, open and closed back test mirror designs, 75-150 mm in size, were first produced by AM from several different materials. Subsequent optical finishing and test experiments have exceeded expectations for density, surface finish, dimensional stability and isotropy of thermal expansion on the optical scale of measurement. Materials currently under examination include aluminum, titanium, beryllium, aluminum beryllium, Inconel 625, stainless steel/bronze, and PEKK polymer.

  10. Immunogenicity of foods and food additives--in vivo testing of gums arabic, karaya and tragacanth.

    PubMed

    Strobel, S; Ferguson, A; Anderson, D M

    1982-12-01

    An inexpensive animal model is described, for investigation of the immunogenicity of substances such as food additives. Inbred mice were immunised with antigen emulsified in complete Freund's adjuvant, and specific cell-mediated immunity subsequently measured by a footpad swelling test. This method has been applied in an investigation of the immunogenicity of the exudate gums, gum arabic, gum karaya and gum tragacanth. These substances are capable of eliciting an immune response which is comparable to the specific immune responses elicited by a protein antigen, e.g. hens' egg ovalbumin. Purification of commercially available gum preparations led to a significant (P less than 0.005) reduction of the immune response under in vivo test conditions.

  11. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis

    NASA Astrophysics Data System (ADS)

    Hensen, B.; Kalb, N.; Blok, M. S.; Dréau, A. E.; Reiserer, A.; Vermeulen, R. F. L.; Schouten, R. N.; Markham, M.; Twitchen, D. J.; Goodenough, K.; Elkouss, D.; Wehner, S.; Taminiau, T. H.; Hanson, R.

    2016-08-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682–686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator.

  12. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis

    PubMed Central

    Hensen, B.; Kalb, N.; Blok, M. S.; Dréau, A. E.; Reiserer, A.; Vermeulen, R. F. L.; Schouten, R. N.; Markham, M.; Twitchen, D. J.; Goodenough, K.; Elkouss, D.; Wehner, S.; Taminiau, T. H.; Hanson, R.

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682–686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  13. Loophole-free Bell test using electron spins in diamond: second experiment and additional analysis.

    PubMed

    Hensen, B; Kalb, N; Blok, M S; Dréau, A E; Reiserer, A; Vermeulen, R F L; Schouten, R N; Markham, M; Twitchen, D J; Goodenough, K; Elkouss, D; Wehner, S; Taminiau, T H; Hanson, R

    2016-01-01

    The recently reported violation of a Bell inequality using entangled electronic spins in diamonds (Hensen et al., Nature 526, 682-686) provided the first loophole-free evidence against local-realist theories of nature. Here we report on data from a second Bell experiment using the same experimental setup with minor modifications. We find a violation of the CHSH-Bell inequality of 2.35 ± 0.18, in agreement with the first run, yielding an overall value of S = 2.38 ± 0.14. We calculate the resulting P-values of the second experiment and of the combined Bell tests. We provide an additional analysis of the distribution of settings choices recorded during the two tests, finding that the observed distributions are consistent with uniform settings for both tests. Finally, we analytically study the effect of particular models of random number generator (RNG) imperfection on our hypothesis test. We find that the winning probability per trial in the CHSH game can be bounded knowing only the mean of the RNG bias. This implies that our experimental result is robust for any model underlying the estimated average RNG bias, for random bits produced up to 690 ns too early by the random number generator. PMID:27509823

  14. [Immunodiffusion tests in gel media with the addition of polyethyleneglycol 6000 for the serodiagnosis of mycoses].

    PubMed

    Zaror, L; Robles, A M; Negroni, R

    1978-01-01

    Different immunodiffusion techniques with and without the addition of polyetilenglycol 6000 (PEG), were studied to determine its effect on the sensitivity of these reactions. One hundred thirteen sera from patients who suffered or had suffered deep mycoses (paracoccidioidomycosis: 49, histoplasmosis: 25, aspergillosis: 25, candidiasis: 8 and coccidioidomycosis: 6) were examined by the quantitative Ouchterlony's immunodiffusion procedure. Regular medium and media with 2% and 4% PEG were used. Eighty two out of the one hundred thirteen sera were positive for the regular medium and 91 for the medium containing 2% of PEG; furthermore, an increase of 1 or 2 two fold dilutions in the titers was observed in 40% of the sera, for the later media. Twenty one sera from aspergillosis cases were examined by agarose gel immunoelectrophoresis, 80% had more precipitin bands in the medium with 2% of PEG. Thirty four serum samples of patients suffering aspergillosis, paracoccidioidomycosis and histoplasmosis were studied using the agarose electroosmophoresis with the secondary immunodiffusion test. An increase in the number of the anodic bands were observed in 55% while 64% presented more catodic bands, when the PEG medium was used. This results would indicate that the addition of 2% PEG 6000 to the regular medium improves the sensitivity of the immunodiffusion tests for mycoses.

  15. The additive effects of quinine on antidepressant drugs in the forced swimming test in mice.

    PubMed

    Guo, W Y; Todd, K G; Bourin, M; Hascoet, M

    1995-09-01

    The aim of this study was to investigate if quinine plus antidepressant drugs (ADS) leads to an additive effect in the forced swimming test. Quinine (0.125, 0.5 mg/kg) and ADS (subactive doses) were given IP 45 and 30 min, respectively, before the test. When combined with QUIN, all drugs that act via inhibition of 5-HT uptake (imipramine, amitriptyline, citalopram, paroxetine, fluoxetine and fluvoxamine) significantly increased the swimming time of mice. Among trazodone, mianserin and iprindole (atypical ADS), only iprindole combined with quinine decreased the immobility (increased swimming) of the animals. The specific noradrenaline (NA) uptake inhibitors, desipramine and viloxazine, but not maprotiline, were also found to reduce the immobility time when pretreated with quinine. The mixed monoamine oxidase (MAO) inhibitor (pargyline) and MAO-A inhibitor (moclobemide) also shortened the period of immobility whereas the MAO-B inhibitor (nialamide) and the dopamine (DA) uptake inhibitor (bupropion) did not. Quinine's additive effects on several types of ADS is likely a result of blockade of potassium channels.

  16. Large fluctuations of the macroscopic current in diffusive systems: a numerical test of the additivity principle.

    PubMed

    Hurtado, Pablo I; Garrido, Pedro L

    2010-04-01

    Most systems, when pushed out of equilibrium, respond by building up currents of locally conserved observables. Understanding how microscopic dynamics determines the averages and fluctuations of these currents is one of the main open problems in nonequilibrium statistical physics. The additivity principle is a theoretical proposal that allows to compute the current distribution in many one-dimensional nonequilibrium systems. Using simulations, we validate this conjecture in a simple and general model of energy transport, both in the presence of a temperature gradient and in canonical equilibrium. In particular, we show that the current distribution displays a Gaussian regime for small current fluctuations, as prescribed by the central limit theorem, and non-Gaussian (exponential) tails for large current deviations, obeying in all cases the Gallavotti-Cohen fluctuation theorem. In order to facilitate a given current fluctuation, the system adopts a well-defined temperature profile different from that of the steady state and in accordance with the additivity hypothesis predictions. System statistics during a large current fluctuation is independent of the sign of the current, which implies that the optimal profile (as well as higher-order profiles and spatial correlations) are invariant upon current inversion. We also demonstrate that finite-time joint fluctuations of the current and the profile are well described by the additivity functional. These results suggest the additivity hypothesis as a general and powerful tool to compute current distributions in many nonequilibrium systems.

  17. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Haller, William J.; Poinsatte, Philip E.; Halbig, Michael C.; Schnulo, Sydney L.; Singh, Mrityunjay; Weir, Don; Wali, Natalie; Vinup, Michael; Jones, Michael G.; Patterson, Clark; Santelle, Tom; Mehl, Jeremy

    2015-01-01

    The research and development activities reported in this publication were carried out under NASA Aeronautics Research Institute (NARI) funded project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing." The objective of the project was to conduct evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. The results of the activities are described in three part report. The first part of the report contains the data and analysis of engine system trade studies, which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. The technical scope of activities included an assessment of the feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composites, which were accomplished by fabricating prototype engine components and testing them in simulated engine operating conditions. The manufacturing process parameters were developed and optimized for polymer and ceramic composites (described in detail in the second and third part of the report). A number of prototype components (inlet guide vane (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included turbine nozzle components. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  18. Testing Departure from Additivity in Tukey’s Model using Shrinkage: Application to a Longitudinal Setting

    PubMed Central

    Ko, Yi-An; Mukherjee, Bhramar; Smith, Jennifer A.; Park, Sung Kyun; Kardia, Sharon L.R.; Allison, Matthew A.; Vokonas, Pantel S.; Chen, Jinbo; Diez-Roux, Ana V.

    2014-01-01

    While there has been extensive research developing gene-environment interaction (GEI) methods in case-control studies, little attention has been given to sparse and efficient modeling of GEI in longitudinal studies. In a two-way table for GEI with rows and columns as categorical variables, a conventional saturated interaction model involves estimation of a specific parameter for each cell, with constraints ensuring identifiability. The estimates are unbiased but are potentially inefficient because the number of parameters to be estimated can grow quickly with increasing categories of row/column factors. On the other hand, Tukey’s one degree of freedom (df) model for non-additivity treats the interaction term as a scaled product of row and column main effects. Due to the parsimonious form of interaction, the interaction estimate leads to enhanced efficiency and the corresponding test could lead to increased power. Unfortunately, Tukey’s model gives biased estimates and low power if the model is misspecified. When screening multiple GEIs where each genetic and environmental marker may exhibit a distinct interaction pattern, a robust estimator for interaction is important for GEI detection. We propose a shrinkage estimator for interaction effects that combines estimates from both Tukey’s and saturated interaction models and use the corresponding Wald test for testing interaction in a longitudinal setting. The proposed estimator is robust to misspecification of interaction structure. We illustrate the proposed methods using two longitudinal studies — the Normative Aging Study and the Multi-Ethnic Study of Atherosclerosis. PMID:25112650

  19. Sulfur-free lignins from alkaline pulping tested in mortar for use as mortar additives.

    PubMed

    Nadif, A; Hunkeler, D; Käuper, P

    2002-08-01

    Sulfur-free lignin, obtained through the acid precipitation of black liquor from the soda pulping process, has been tested as water reducer in mortar. It has also been compared to existing commercial additives such as naphthalene sulfonates and lignosulfonates. The ash content and sugar content of these lignins are low in comparison to lignosulfonates, conferring on them higher purity. A procedure for small scale testing derived from the industrial norms SN-EN196 and ASTM (Designation C230-90) is presented. Specifically, all the sulfur-free lignins tested improved the flow of the mortar. Selected flax lignins performed better than lignosulfonates though still less than naphthalene sulfonates. Furthermore, certain hemp lignins gave comparable results to the lignosulfonates. Overall, the straw lignin prepared herein is comparable in performance to commercially available lignins, such as Organocell, Alcell and Curan 100. The plant from which the lignin was isolated, and the process of the pulp mill are the primary influences on the performance of the lignin.

  20. Quantitative and Qualitative Responses to Topical Cold in Healthy Caucasians Show Variance between Individuals but High Test-Retest Reliability.

    PubMed

    Moss, Penny; Whitnell, Jasmine; Wright, Anthony

    2016-01-01

    Increased sensitivity to cold may be a predictor of persistent pain, but cold pain threshold is often viewed as unreliable. This study aimed to determine the within-subject reliability and between-subject variance of cold response, measured comprehensively as cold pain threshold plus pain intensity and sensation quality at threshold. A test-retest design was used over three sessions, one day apart. Response to cold was assessed at four sites (thenar eminence, volar forearm, tibialis anterior, plantar foot). Cold pain threshold was measured using a Medoc thermode and standard method of limits. Intensity of pain at threshold was rated using a 10cm visual analogue scale. Quality of sensation at threshold was quantified with indices calculated from subjects' selection of descriptors from a standard McGill Pain Questionnaire. Within-subject reliability for each measure was calculated with intra-class correlation coefficients and between-subject variance was evaluated as group coefficient of variation percentage (CV%). Gender and site comparisons were also made. Forty-five healthy adults participated: 20 male, 25 female; mean age 29 (range 18-56) years. All measures at all four test sites showed high within-subject reliability: cold pain thresholds r = 0.92-0.95; pain rating r = 0.93-0.97; McGill pain quality indices r = 0.87-0.85. In contrast, all measures showed wide between-subject variance (CV% between 51.4% and 92.5%). Upper limb sites were consistently more sensitive than lower limb sites, but equally reliable. Females showed elevated cold pain thresholds, although similar pain intensity and quality to males. Females were also more reliable and showed lower variance for all measures. Thus, although there was clear population variation, response to cold for healthy individuals was found to be highly reliable, whether measured as pain threshold, pain intensity or sensation quality. A comprehensive approach to cold response testing therefore may add validity and

  1. Quantitative and Qualitative Responses to Topical Cold in Healthy Caucasians Show Variance between Individuals but High Test-Retest Reliability

    PubMed Central

    Moss, Penny; Whitnell, Jasmine; Wright, Anthony

    2016-01-01

    Increased sensitivity to cold may be a predictor of persistent pain, but cold pain threshold is often viewed as unreliable. This study aimed to determine the within-subject reliability and between-subject variance of cold response, measured comprehensively as cold pain threshold plus pain intensity and sensation quality at threshold. A test-retest design was used over three sessions, one day apart. Response to cold was assessed at four sites (thenar eminence, volar forearm, tibialis anterior, plantar foot). Cold pain threshold was measured using a Medoc thermode and standard method of limits. Intensity of pain at threshold was rated using a 10cm visual analogue scale. Quality of sensation at threshold was quantified with indices calculated from subjects' selection of descriptors from a standard McGill Pain Questionnaire. Within-subject reliability for each measure was calculated with intra-class correlation coefficients and between-subject variance was evaluated as group coefficient of variation percentage (CV%). Gender and site comparisons were also made. Forty-five healthy adults participated: 20 male, 25 female; mean age 29 (range 18–56) years. All measures at all four test sites showed high within-subject reliability: cold pain thresholds r = 0.92–0.95; pain rating r = 0.93–0.97; McGill pain quality indices r = 0.87–0.85. In contrast, all measures showed wide between-subject variance (CV% between 51.4% and 92.5%). Upper limb sites were consistently more sensitive than lower limb sites, but equally reliable. Females showed elevated cold pain thresholds, although similar pain intensity and quality to males. Females were also more reliable and showed lower variance for all measures. Thus, although there was clear population variation, response to cold for healthy individuals was found to be highly reliable, whether measured as pain threshold, pain intensity or sensation quality. A comprehensive approach to cold response testing therefore may add validity

  2. A combination of a dairy product fermented by lactobacilli and galactooligosaccharides shows additive effects on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor.

    PubMed

    Takasugi, Satoshi; Ashida, Kinya; Maruyama, Suyaka; Matsukiyo, Yukari; Kaneko, Tetsuo; Yamaji, Taketo

    2013-06-01

    This study aimed to investigate the effects of a combination of a dairy product fermented by lactobacilli (DFL) and galactooligosaccharides (GOS) on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor (PPI). Three-week-old male rats were assigned to receive one of six diets: a control diet, control diets containing 1.6 or 5.0 % GOS, a DFL diet and DFL diets containing 1.6 or 5.0 % GOS for 9 days. From day 5 of the feeding period, half of the rats fed with control diets were subcutaneously administered with saline, whereas the remaining rats were administered with PPI for 5 days. Calcium (Ca), phosphorus (P), magnesium (Mg), iron (Fe) and zinc (Zn) balances were determined from days 6 to 9. PPI administration significantly decreased the apparent absorption of Ca and Fe and increased urinary P excretion, resulting in decreased Ca, Fe and P retention. GOS dose-dependently increased the apparent absorption of Ca, Mg and Fe and urinary Mg excretion and decreased urinary P excretion. DFL significantly increased the apparent absorption of Ca and Mg and urinary Mg excretion. The combination of DFL and GOS additively affected these parameters, resulting in increased Ca, P and Fe retention, and it further increased the apparent absorption and retention of Zn at 5.0 % GOS. In conclusion, the combination of DFL and GOS improves Ca, P and Fe retention in an additive manner and increases the Zn retention in growing rats with hypochlorhydria induced by PPI.

  3. Stringent test for non-additive, non-interacting, kinetic energy functionals

    NASA Astrophysics Data System (ADS)

    Jiang, Kaili; Nafziger, Jonathan; Wasserman, Adam

    Partition Density Functional Theory (PDFT) provides an ideal framework for testing and developing new approximations to the non-additive and non-interacting kinetic energy functional (Tsnadd [ {nα } ]), understood as a functional of the set of fragment ground-state densities. We present our progress on both of these fronts: (1) Systematic comparison of the performance of various existing approximations to Tsnadd [ {nα } ] ; and (2) Development of new approximations. We find that a re-parametrization of the GGA enhancement factor employed for the construction of Tsnadd [ {nα } ] through the conjointness conjecture captures essential features of the functional derivatives of Tsnadd [ {nα } ] . A physically-motivated two-orbital approximation for Tsnadd [ {nα } ] is shown to outperform most other approximations for the case of He2, and an intriguing one-parameter formula makes this approximation accurate for all noble-gas diatomics.

  4. Axl Inhibition Primes Chronic Lymphocytic Leukemia B-Cells to Apoptosis and Show Synergistic/Additive Effects in Combination with BTK inhibitors

    PubMed Central

    Sinha, Sutapa; Boysen, Justin; Nelson, Michael; Secreto, Charla; Warner, Steven L.; Bearss, David J.; Lesnick, Connie; Shanafelt, Tait D.; Kay, Neil E.; Ghosh, Asish K.

    2015-01-01

    Purpose B-cell chronic lymphocytic leukemia (CLL) is an incurable disease despite aggressive therapeutic approaches. We previously found that Axl receptor tyrosine kinase (RTK) plays a critical role in CLL B-cell survival. Here, we explored the possibility of using a high-affinity Axl inhibitor as a single agent or in combination with Bruton’s tyrosine kinase (BTK) inhibitors for future clinical trial to treat CLL patients. Experimental Design Expression/activation status of other members of the TAM (Tyro3, Axl, MER) family of RTKs in CLL B-cells was evaluated. Cells were treated with a high-affinity orally bioavailable Axl inhibitor TP-0903 with or without presence of CLL bone marrow stromal cells (BMSCs). Inhibitory effects of TP-0903 on Axl signaling pathway was also evaluated in CLL B-cells. Finally, cells were exposed to TP-0903 in combination with BTK inhibitors to determine any synergistic/additive effects of the combination. Results CLL B-cells overexpress Tyro3, but not MER. Of interest, Tyro3 remains as constitutively phosphorylated and form a complex with Axl in CLL B-cells. TP-0903 induces massive apoptosis in CLL B-cells with LD50 values of nanomolar ranges. Importantly, CLL BMSCs could not protect the leukemic B-cells from TP-0903 induced apoptosis. A marked reduction of the anti-apoptotic proteins Mcl-1, Bcl-2, XIAP and upregulation of the pro-apoptotic protein BIM in CLL B-cells were detected as a result of Axl inhibition. Finally, combination of TP-0903 with BTK inhibitors augments CLL B-cell apoptosis. Conclusion Administration of TP-0903 either as a single agent or in combination with BTK inhibitors may be effective in treating CLL patients. PMID:25673699

  5. Dynamic effect of sodium-water reaction in fast flux test facility power addition sodium pipes

    SciTech Connect

    Huang, S.N.; Anderson, M.J.

    1990-03-01

    The Fast Flux Facility (FFTF) is a demonstration and test facility of the sodium-cooled fast breeder reactor. A power addition'' to the facility is being considered to convert some of the dumped, unused heat into electricity generation. Components and piping systems to be added are sodium-water steam generators, sodium loop extensions from existing dump heat exchangers to sodium-water steam generators, and conventional water/steam loops. The sodium loops can be subjected to the dynamic loadings of pressure pulses that are caused by postulated sodium leaks and subsequent sodium-water reaction in the steam generator. The existing FFTF secondary pipes and the new power addition sodium loops were evaluated for exposure to the dynamic effect of the sodium-water reaction. Elastic and simplified inelastic dynamic analyses were used in this feasibility study. The results indicate that both the maximum strain and strain range are within the allowable limits. Several cycles of the sodium-water reaction can be sustained by the sodium pipes that are supported by ordinary pipe supports and seismic restraints. Expensive axial pipe restraints to withstand the sodium-water reaction loads are not needed, because the pressure-pulse-induced alternating bending stresses act as secondary stresses and the pressure pulse dynamic effect is a deformation-controlled quantity and is self-limiting. 14 refs., 7 figs., 3 tabs.

  6. The biobehavioral family model: testing social support as an additional exogenous variable.

    PubMed

    Woods, Sarah B; Priest, Jacob B; Roush, Tara

    2014-12-01

    This study tests the inclusion of social support as a distinct exogenous variable in the Biobehavioral Family Model (BBFM). The BBFM is a biopsychosocial approach to health that proposes that biobehavioral reactivity (anxiety and depression) mediates the relationship between family emotional climate and disease activity. Data for this study included married, English-speaking adult participants (n = 1,321; 55% female; M age = 45.2 years) from the National Comorbidity Survey Replication, a nationally representative epidemiological study of the frequency of mental disorders in the United States. Participants reported their demographics, marital functioning, social support from friends and relatives, anxiety and depression (biobehavioral reactivity), number of chronic health conditions, and number of prescription medications. Confirmatory factor analyses supported the items used in the measures of negative marital interactions, social support, and biobehavioral reactivity, as well as the use of negative marital interactions, friends' social support, and relatives' social support as distinct factors in the model. Structural equation modeling indicated a good fit of the data to the hypothesized model (χ(2)  = 846.04, p = .000, SRMR = .039, CFI = .924, TLI = .914, RMSEA = .043). Negative marital interactions predicted biobehavioral reactivity (β = .38, p < .001), as did relatives' social support, inversely (β = -.16, p < .001). Biobehavioral reactivity predicted disease activity (β = .40, p < .001) and was demonstrated to be a significant mediator through tests of indirect effects. Findings are consistent with previous tests of the BBFM with adult samples, and suggest the important addition of family social support as a predicting factor in the model. PMID:24981970

  7. The biobehavioral family model: testing social support as an additional exogenous variable.

    PubMed

    Woods, Sarah B; Priest, Jacob B; Roush, Tara

    2014-12-01

    This study tests the inclusion of social support as a distinct exogenous variable in the Biobehavioral Family Model (BBFM). The BBFM is a biopsychosocial approach to health that proposes that biobehavioral reactivity (anxiety and depression) mediates the relationship between family emotional climate and disease activity. Data for this study included married, English-speaking adult participants (n = 1,321; 55% female; M age = 45.2 years) from the National Comorbidity Survey Replication, a nationally representative epidemiological study of the frequency of mental disorders in the United States. Participants reported their demographics, marital functioning, social support from friends and relatives, anxiety and depression (biobehavioral reactivity), number of chronic health conditions, and number of prescription medications. Confirmatory factor analyses supported the items used in the measures of negative marital interactions, social support, and biobehavioral reactivity, as well as the use of negative marital interactions, friends' social support, and relatives' social support as distinct factors in the model. Structural equation modeling indicated a good fit of the data to the hypothesized model (χ(2)  = 846.04, p = .000, SRMR = .039, CFI = .924, TLI = .914, RMSEA = .043). Negative marital interactions predicted biobehavioral reactivity (β = .38, p < .001), as did relatives' social support, inversely (β = -.16, p < .001). Biobehavioral reactivity predicted disease activity (β = .40, p < .001) and was demonstrated to be a significant mediator through tests of indirect effects. Findings are consistent with previous tests of the BBFM with adult samples, and suggest the important addition of family social support as a predicting factor in the model.

  8. Additive effects of clonidine and antidepressant drugs in the mouse forced-swimming test.

    PubMed

    Malinge, M; Bourin, M; Colombel, M C; Larousse, C

    1988-01-01

    In the mouse forced-swimming model, dose-dependent reversal of immobility was induced by the alpha-agonist clonidine given IP 30 min before testing. In addition, three preferential inhibitors of 5-HT uptake (citalopram, indalpine and fluvoxamine) had similar activity in the dose range 8-16 mg/kg as did the 5-HT1 agonist 8-OH-DPAT (1-4 mg/kg). Pretreatment with alpha-methyl-paratyrosine (100 mg/kg) did not prevent clonidine (1 mg/kg) action, suggesting that there was mediation by alpha post-junctional receptors. The effect of clonidine was unaltered by prazosin (2 mg/kg) and reversed by yohimbine (4 mg/kg) and 5-MeODMT (1 mg/kg), whereas it was potentiated by reserpine (2.5 mg/kg), methysergide (2 mg/kg) and ketanserin (8 mg/kg). Moreover, an ineffective dose of clonidine (0.06 mg/kg at 45 min pre-testing) made active subthreshold doses of various antidepressants (given at 30 min pre-testing): imipramine (4 mg/kg), amitriptyline (1 mg/kg), maprotiline (8 mg/kg), citalopram (2 mg/kg), indalpine, fluvoxamine and mianserin (4 mg/kg), viloxazine (2 mg/kg). Similar interactions were found with iprindole and nialamide (32 mg/kg), which were inactive alone up to 64 mg/kg, and 8-OH-DPAT (0.5 mg/kg) but not with major and minor tranquillizers. It is suggested that one effect of antidepressants might be the triggering of different relationships between alpha-2 and 5-HT mechanisms.

  9. Additive Manufacturing, Design, Testing, and Fabrication: A Full Engineering Experience at JSC

    NASA Technical Reports Server (NTRS)

    Zusack, Steven

    2016-01-01

    I worked on several projects this term. While most projects involved additive manufacturing, I was also involved with two design projects, two testing projects, and a fabrication project. The primary mentor for these was Richard Hagen. Secondary mentors were Hai Nguyen, Khadijah Shariff, and fabrication training from James Brown. Overall, my experience at JSC has been successful and what I have learned will continue to help me in my engineering education and profession long after I leave. My 3D printing projects ranged from less than a 1 cubic centimeter to about 1 cubic foot and involved several printers using different printing technologies. It was exciting to become familiar with printing technologies such as industrial grade FDM (Fused Deposition Modeling), the relatively new SLA (Stereolithography), and PolyJet. My primary duty with the FDM printers was to model parts that came in from various sources to print effectively and efficiently. Using methods my mentor taught me and the Stratasys Insight software, I was able to minimize imperfections, hasten build time, improve strength for specific forces (tensile, shear, etc...), and reduce likelihood of a print-failure. Also using FDM, I learned how to repair a part after it was printed. This is done by using a special kind of glue that chemically melts the two faces of plastic parts together to form a fused interface. My first goal with SLA technology was to bring the printer back to operational readiness. In becoming familiar with the Pegasus SLA printer, I researched the leveling, laser settings, and different vats to hold liquid material. With this research, I was successfully able to bring the Pegasus back online and have successfully printed multiple sample parts as well as functional parts. My experience with PolyJet technology has been focused on an understanding of the abilities/limits, costs, and the maintenance for daily use. Still upcoming will be experience with using a composite printer that uses FDM

  10. Male mice housed in groups engage in frequent fighting and show a lower response to additional bone loading than females or individually housed males that do not fight.

    PubMed

    Meakin, Lee B; Sugiyama, Toshihiro; Galea, Gabriel L; Browne, William J; Lanyon, Lance E; Price, Joanna S

    2013-05-01

    Experiments to investigate bone's physiological adaptation to mechanical loading frequently employ models that apply dynamic loads to bones in vivo and assess the changes in mass and architecture that result. It is axiomatic that bones will only show an adaptive response if the applied artificial loading environment differs in a significant way from that to which the bones have been habituated by normal functional loading. It is generally assumed that this normal loading is similar between experimental groups. In the study reported here we found that this was not always the case. Male and female 17-week-old C57BL/6 mice were housed in groups of six, and a single episode (40 cycles) of non-invasive axial loading, engendering 2,200 με on the medial surface of the proximal tibiae in sample mice, was applied to right tibiae on alternate days for two weeks. This engendered an adaptive increase in bone mass in females, but not males. Observation revealed the main difference in behaviour between males and females was that males were involved in fights 1.3 times per hour, whereas the females never fought. We therefore housed all mice individually. In females, there was a similar significant osteogenic response to loading in cortical and trabecular bone of both grouped and individual mice. In contrast, in males, adaptive increases in the loaded compared with non-loaded control bones was only apparent in animals housed individually. Our interpretation of these findings is that the frequent vigorous fighting that occurs between young adult males housed in groups could be sufficient to engender peak strains and strain rates that equal or exceed the stimulus derived from artificial loading. This indicates the importance of ensuring that physical activity is consistent between groups. Reducing the background level of the naturally engendered strain environment allows adaptive responses to artificial loading to be demonstrated at lower loads.

  11. Review and evaluation of literature on testing of chemical additives for scale control in geothermal fluids. Final report

    SciTech Connect

    Crane, C.H.; Kenkeremath, D.C.

    1981-01-01

    A selected group of reported tests of chemical additives in actual geothermal fluids are reviewed and evaluated to summarize the status of chemical scale-control testing and identify information and testing needs. The task distinguishes between scale control in the cooling system of a flash plant and elsewhere in the utilization system due to the essentially different operating environments involved. Additives for non-cooling geothermal fluids are discussed by scale type: silica, carbonate, and sulfide.

  12. Goodness-of-fit tests for the additive risk model with (p > 2)-dimensional time-invariant covariates.

    PubMed

    Kim, J; Song, M S; Lee, S

    1998-01-01

    This paper presents methods for checking the goodness-of-fit of the additive risk model with p(> 2)-dimensional time-invariant covariates. The procedures are an extension of Kim and Lee (1996) who developed a test to assess the additive risk assumption for two-sample censored data. We apply the proposed tests to survival data from South Wales nikel refinery workers. Simulation studies are carried out to investigate the performance of the proposed tests for practical sample sizes. PMID:9880997

  13. 30 CFR 250.449 - What additional BOP testing requirements must I meet?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... between control stations and pods; (d) Pressure test the blind or blind-shear ram BOP during stump tests and at all casing points; (e) The interval between any blind or blind-shear ram BOP pressure tests may not exceed 30 days; (f) Pressure test variable bore-pipe ram BOPs against the largest and...

  14. A test of Darwin's naturalization hypothesis in the thistle tribe shows that close relatives make bad neighbors.

    PubMed

    Park, Daniel S; Potter, Daniel

    2013-10-29

    Invasive species have great ecological and economic impacts and are difficult to control once established, making the ability to understand and predict invasive behavior highly desirable. Preemptive measures to prevent potential invasive species from reaching new habitats are the most economically and environmentally efficient form of management. Darwin's naturalization hypothesis predicts that invaders less related to native flora are more likely to be successful than those that are closely related to natives. Here we test this hypothesis, using the weed-rich thistle tribe, Cardueae, in the California Floristic Province, a biodiversity hotspot, as our study system. An exhaustive molecular phylogenetic approach was used, generating and examining more than 100,000 likely phylogenies of the tribe based on nuclear and chloroplast DNA markers, representing the most in-depth reconstruction of the clade to date. Branch lengths separating invasive and noninvasive introduced taxa from native California taxa were used to represent phylogenetic distances between these groups and were compared at multiple biogeographical scales to ascertain whether invasive thistles are more or less closely related to natives than noninvasive introduced thistles are. Patterns within this highly supported clade show that not only are introduced thistles more closely related to natives more likely to be invasive, but these invasive species are also evolutionarily closer to native flora than by chance. This suggests that preadaptive traits are important in determining an invader's success. Such rigorous molecular phylogenetic analyses may prove a fruitful means for furthering our understanding of biological invasions and developing predictive frameworks for screening potential invasive taxa.

  15. A test of Darwin's naturalization hypothesis in the thistle tribe shows that close relatives make bad neighbors

    PubMed Central

    Park, Daniel S.; Potter, Daniel

    2013-01-01

    Invasive species have great ecological and economic impacts and are difficult to control once established, making the ability to understand and predict invasive behavior highly desirable. Preemptive measures to prevent potential invasive species from reaching new habitats are the most economically and environmentally efficient form of management. Darwin’s naturalization hypothesis predicts that invaders less related to native flora are more likely to be successful than those that are closely related to natives. Here we test this hypothesis, using the weed-rich thistle tribe, Cardueae, in the California Floristic Province, a biodiversity hotspot, as our study system. An exhaustive molecular phylogenetic approach was used, generating and examining more than 100,000 likely phylogenies of the tribe based on nuclear and chloroplast DNA markers, representing the most in-depth reconstruction of the clade to date. Branch lengths separating invasive and noninvasive introduced taxa from native California taxa were used to represent phylogenetic distances between these groups and were compared at multiple biogeographical scales to ascertain whether invasive thistles are more or less closely related to natives than noninvasive introduced thistles are. Patterns within this highly supported clade show that not only are introduced thistles more closely related to natives more likely to be invasive, but these invasive species are also evolutionarily closer to native flora than by chance. This suggests that preadaptive traits are important in determining an invader’s success. Such rigorous molecular phylogenetic analyses may prove a fruitful means for furthering our understanding of biological invasions and developing predictive frameworks for screening potential invasive taxa. PMID:24127587

  16. Additive effects of glyburide and antidepressants in the forced swimming test: evidence for the involvement of potassium channel blockade.

    PubMed

    Guo, W; Todd, K; Bourin, M; Hascoet, M; Kouadio, F

    1996-08-01

    Evidence in the literature suggests that the modulatory effects of antidepressant drugs (ADS) on neuronal excitability, via the inhibition of K+ channels, may be the final common pathway of pharmacological action. Therefore, we tested the hypothesis that combining the ATP-sensitive K+ channel blocker glyburide with a variety of ADS would produce an additive effect and decrease the immobility time of mice in the forced swimming test (FST). Glyburide (GLY, IP, 30 and 50 mg/kg) and subactive doses of ADS were administered 45 and 30 min, respectively, prior to behavioral testing. Results showed that when combined with GLY, ADS whose main pharmacological effect is one of 5-HT uptake blockade (imipramine, amitriptyline, citalopram, paroxetine, fluoxetine, and fluvoxamine) were more effective in decreasing the amount of time mice were immobile, than when these drugs were administered alone. Some noradrenaline uptake inhibiting ADS (desipramine and viloxazine, but not maprotiline) were also significantly more effective in decreasing immobility time when combined with GLY than when administered alone. Pretreatment with GLY was found to have no effect on the dopamine uptake inhibitor bupropion, and out of the atypical ADS tested (trazodone, mianserine and iprindole), only coadministration with iprindole decreased the immobility time. Only the specific MAO-A inhibitor moclobemide was observed to have an antiimmobility effect when combined with GLY. Neither MAO-B specific (RO 16 6491) nor mixed MAO inhibitors (nialamide and pargyline) interacted with GLY to produce antiimmobility effects. These results corroborate and extend our previous report of the ADS enhancing effects of quinine in the same behavioral model, and suggest that the additive effects of quinine and GLY on ADS in FST are a result of K+ channel blockade.

  17. 30 CFR 250.449 - What additional BOP testing requirements must I meet?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... before running casing; (j) Test all ROV intervention functions on your subsea BOP stack during the stump... ROV hot stabs are function tested and are capable of actuating, at a minimum, one set of pipe rams...

  18. 30 CFR 250.449 - What additional BOP testing requirements must I meet?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... casing; (j) Test all ROV intervention functions on your subsea BOP stack during the stump test. You must... procedures with your APD or APM for District Manager approval. You must: (1) ensure that the ROV hot...

  19. 30 CFR 250.449 - What additional BOP testing requirements must I meet?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... all ROV intervention functions on your subsea BOP stack during the stump test. Each ROV must be fully compatible with the BOP stack ROV intervention panels. You must also test and verify closure of at least one set of rams during the initial test on the seafloor through an ROV hot stab. You must submit...

  20. 30 CFR 250.449 - What additional BOP testing requirements must I meet?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... all ROV intervention functions on your subsea BOP stack during the stump test. Each ROV must be fully compatible with the BOP stack ROV intervention panels. You must also test and verify closure of at least one set of rams during the initial test on the seafloor through an ROV hot stab. You must submit...

  1. Synergistic interactions between commonly used food additives in a developmental neurotoxicity test.

    PubMed

    Lau, Karen; McLean, W Graham; Williams, Dominic P; Howard, C Vyvyan

    2006-03-01

    Exposure to non-nutritional food additives during the critical development window has been implicated in the induction and severity of behavioral disorders such as attention deficit hyperactivity disorder (ADHD). Although the use of single food additives at their regulated concentrations is believed to be relatively safe in terms of neuronal development, their combined effects remain unclear. We therefore examined the neurotoxic effects of four common food additives in combinations of two (Brilliant Blue and L-glutamic acid, Quinoline Yellow and aspartame) to assess potential interactions. Mouse NB2a neuroblastoma cells were induced to differentiate and grow neurites in the presence of additives. After 24 h, cells were fixed and stained and neurite length measured by light microscopy with computerized image analysis. Neurotoxicity was measured as an inhibition of neurite outgrowth. Two independent models were used to analyze combination effects: effect additivity and dose additivity. Significant synergy was observed between combinations of Brilliant Blue with L-glutamic acid, and Quinoline Yellow with aspartame, in both models. Involvement of N-methyl-D-aspartate (NMDA) receptors in food additive-induced neurite inhibition was assessed with a NMDA antagonist, CNS-1102. L-glutamic acid- and aspartame-induced neurotoxicity was reduced in the presence of CNS-1102; however, the antagonist did not prevent food color-induced neurotoxicity. Theoretical exposure to additives was calculated based on analysis of content in foodstuff, and estimated percentage absorption from the gut. Inhibition of neurite outgrowth was found at concentrations of additives theoretically achievable in plasma by ingestion of a typical snack and drink. In addition, Trypan Blue dye exclusion was used to evaluate the cellular toxicity of food additives on cell viability of NB2a cells; both combinations had a straightforward additive effect on cytotoxicity. These data have implications for the

  2. Patch testing discordance alert: false-negative findings with rubber additives and fragrances.

    PubMed

    Sherertz, E F; Fransway, A F; Belsito, D V; DeLeo, V A; Fowler, J F; Maibach, H I; Marks, J G; Mathias, C G; Pratt, M D; Rietschel, R L; Taylor, J S

    2001-08-01

    From July 1996 through June 1998, the North American Contact Dermatitis Group evaluated 318 patients for suspected contact dermatitis by patch testing simultaneously with Finn Chambers and the T.R.U.E. Test allergen system. Discrepancies between the two systems were found in some of the results, particularly with fragrance and rubber allergens. These results suggest that positive reactions to fragrance, thiuram, and carba mix allergens may be missed if the T.R.U.E. Test is used alone.

  3. Something That Test Scores Do Not Show: Engaging in Community Diversity as a Local Response to Global Education Trends

    ERIC Educational Resources Information Center

    Valdiviezo, Laura A.

    2014-01-01

    At Smith Street Elementary School, the globalizing education trends that English language learner (ELL) teachers face focus on measuring student achievement through testing and the English mainstreaming of non-dominant students as opposed to the cultivation of the students' linguistic and cultural diversity. The ELL teachers at Smith Street…

  4. Simulations Show Diagnostic Testing For Malaria In Young African Children Can Be Cost-Saving Or Cost-Effective

    PubMed Central

    Phillips, Victoria; Njau, Joseph; Li, Shang; Kachur, Patrick

    2015-01-01

    Malaria imposes a substantial global disease burden. It disproportionately affects sub-Saharan Africans, particularly young children. In an effort to improve disease management, the World Health Organization (WHO) recommended in 2010 that countries test children younger than age five who present with suspected malaria fever to confirm the diagnosis instead of treating them presumptively with antimalarial drugs. Costs and concerns about the overall health impact of such diagnostic testing for malaria in children remain barriers to full implementation. Using data from national Malaria Indicator Surveys, we estimated two-stage microsimulation models for Angola, Tanzania, and Uganda to assess the policy’s cost-effectiveness. We found that diagnostic testing for malaria in children younger than five is cost-saving in Angola. In Tanzania and Uganda the cost per life-year gained is $5.54 and $94.28, respectively. The costs projected for Tanzania and Uganda are less than the WHO standard of $150 per life-year gained. Our results were robust under varying assumptions about cost, prevalence of malaria, and behavior, and they strongly suggest the pursuit of policies that facilitate full implementation of testing for malaria in children younger than five. PMID:26153315

  5. 16 CFR 1631.32 - Reasonable and representative tests and recordkeeping requirements-additional requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CARPETS AND RUGS (FF 2-70) Rules and Regulations § 1631.32 Reasonable and representative tests and... for small carpets and rugs subject to FF 2-70 shall be subject to all of the requirements of § 1631.31... warranties for small carpets and rugs subject to FF 2-70 shall perform tests and maintain records on...

  6. 16 CFR 1631.32 - Reasonable and representative tests and recordkeeping requirements-additional requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CARPETS AND RUGS (FF 2-70) Rules and Regulations § 1631.32 Reasonable and representative tests and... for small carpets and rugs subject to FF 2-70 shall be subject to all of the requirements of § 1631.31... warranties for small carpets and rugs subject to FF 2-70 shall perform tests and maintain records on...

  7. 16 CFR 1631.32 - Reasonable and representative tests and recordkeeping requirements-additional requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CARPETS AND RUGS (FF 2-70) Rules and Regulations § 1631.32 Reasonable and representative tests and... for small carpets and rugs subject to FF 2-70 shall be subject to all of the requirements of § 1631.31... warranties for small carpets and rugs subject to FF 2-70 shall perform tests and maintain records on...

  8. 16 CFR 1631.32 - Reasonable and representative tests and recordkeeping requirements-additional requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CARPETS AND RUGS (FF 2-70) Rules and Regulations § 1631.32 Reasonable and representative tests and... for small carpets and rugs subject to FF 2-70 shall be subject to all of the requirements of § 1631.31... warranties for small carpets and rugs subject to FF 2-70 shall perform tests and maintain records on...

  9. 16 CFR 1631.32 - Reasonable and representative tests and recordkeeping requirements-additional requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CARPETS AND RUGS (FF 2-70) Rules and Regulations § 1631.32 Reasonable and representative tests and... for small carpets and rugs subject to FF 2-70 shall be subject to all of the requirements of § 1631.31... warranties for small carpets and rugs subject to FF 2-70 shall perform tests and maintain records on...

  10. MIXTURES OF THYROID DISRUPTING CHEMICALS: TESTING ADDITIVITY OF HEPATIC INDUCERS AND THYROID PEROXIDASE INHIBITORS.

    EPA Science Inventory

    Humans are exposed to chemical mixtures via diet, occupation, and the environment. Previous data demonstrated that low doses of polycyclic halogenated aromatic hydrocarbons (PHAHs) acting through similar mechanisms result in an additive reduction of thyroxine (T4). If xenobioti...

  11. Testing for Additivity in Chemical Mixtures Using a Fixed-Ratio Ray Design and Statistical Equivalence Testing Methods

    EPA Science Inventory

    Fixed-ratio ray designs have been used for detecting and characterizing interactions of large numbers of chemicals in combination. Single chemical dose-response data are used to predict an “additivity curve” along an environmentally relevant ray. A “mixture curve” is estimated fr...

  12. A simple spatial working memory and attention test on paired symbols shows developmental deficits in schizophrenia patients.

    PubMed

    Song, Wei; Zhang, Kai; Sun, Jinhua; Ma, Lina; Jesse, Forrest Fabian; Teng, Xiaochun; Zhou, Ying; Bao, Hechen; Chen, Shiqing; Wang, Shuai; Yang, Beimeng; Chu, Xixia; Ding, Wenhua; Du, Yasong; Cheng, Zaohuo; Wu, Bin; Chen, Shanguang; He, Guang; He, Lin; Chen, Xiaoping; Li, Weidong

    2013-01-01

    People with neuropsychiatric disorders such as schizophrenia often display deficits in spatial working memory and attention. Evaluating working memory and attention in schizophrenia patients is usually based on traditional tasks and the interviewer's judgment. We developed a simple Spatial Working Memory and Attention Test on Paired Symbols (SWAPS). It takes only several minutes to complete, comprising 101 trials for each subject. In this study, we tested 72 schizophrenia patients and 188 healthy volunteers in China. In a healthy control group with ages ranging from 12 to 60, the efficiency score (accuracy divided by reaction time) reached a peak in the 20-27 age range and then declined with increasing age. Importantly, schizophrenia patients failed to display this developmental trend in the same age range and adults had significant deficits compared to the control group. Our data suggests that this simple Spatial Working Memory and Attention Test on Paired Symbols can be a useful tool for studies of spatial working memory and attention in neuropsychiatric disorders.

  13. The effects of practice on speed of information processing using the Adjusting-Paced Serial Addition Test (Adjusting-PSAT) and the Computerized Tests of Information Processing (CTIP).

    PubMed

    Baird, B J; Tombaugh, Thomas N; Francis, M

    2007-01-01

    Three experiments were conducted to determine the effects of practice on the Adjusting-Paced Serial Addition Task (Adjusting-PSAT) (Tombaugh, 1999) and the Computerized Tests of Information Processing (CTIP) (Tombaugh & Rees, 2000). The Adjusting-PSAT is a computerized modification of the Paced Auditory Serial Addition Test (PASAT) (Gronwall, 1977) that makes the interval between digits contingent on the correctness of the response. This titration procedure permits a threshold value to be derived that represents the shortest presentation interval in which a person can process the digits to produce the correct sum. The CTIP consists of three reaction time tests that are progressively more difficult. Results showed that robust practice effects occurred with the Adjusting-PSAT, with the greatest increase in performance occurring on the first retest trial. Practice effects were equally prominent regardless of whether the first retest trial occurred 20A min, 1 week, or 3 months after the first administration. These gains were maintained for periods up to 6 months and were independent of modality of presentation (visual or auditory) and type of number list (easy or hard). In contrast to the findings with the Adjusting-PSAT, only minimal practice effects were observed with the CTIP. The major clinical implication of the study is that the high reliability coefficients for the CTIP, the lack of anxiety associated with its administration, and its insensitivity to variables such as numerical and verbal ability make the CTIP ideally suited for the serial evaluation of cognitive status. These characteristics also make the CTIP a viable alternative to the Adjusting-PSAT or PASAT for measuring speed of information processing. If the Adjusting-PSAT is administered repeatedly in clinical evaluations, a "dual baseline" or "run in" procedure should be used, with the second administration serving as the baseline measurement. PMID:17523883

  14. Prolonged ELS test with the marine flatfish sole (Solea solea) shows delayed toxic effects of previous exposure to PCB 126.

    PubMed

    Foekema, Edwin M; Deerenberg, Charlotte M; Murk, Albertinka J

    2008-11-21

    The effect of the dioxin-like PCB 126 (3,3',4,4',5-pentachlorobiphenyl) on the early development of the marine flatfish sole (Solea solea) was tested in a newly developed early life stage (ELS) test that includes the metamorphosis of the symmetric larvae into an asymmetrical flatfish. Early life stages of sole were exposed to a concentration series of PCB 126 in seawater until 4, 8, 10 and 15 days post fertilisation (dpf). Subsequently the development of the larvae was registered under further unexposed conditions. The LC50s at the start of the free-feeding stage (12 dpf) ranged between 39 and 83 ng PCB 126/l depending on exposure duration. After the fish had completed the metamorphosis, the LC50 values ranged between 1.7 and 3.7 ng PCB 126/l for the groups exposed for 4, 8 and 10 dpf, respectively. Thus exposure for only 4 days, covering only the egg stage, was sufficient to cause adverse effects during a critical developmental phase two weeks later. The internal dosages of these larvae, determined by means of an in vitro gene reporter assay as dioxin-equivalent values (TEQ), revealed a LD50 of 1ng TEQ/g lipid, which is within the same order of magnitude as TEQ levels found in fish from highly polluted areas. This study indicates that ELS fish tests that are terminated shortly after the fish becomes free-feeding, underestimate the toxic potential of compounds with low acute toxicity such as PCBs. Our prolonged ELS with this native marine flatfish suggests that reproductive success of fish populations at contaminated sites can be affected by persistent compounds that are accumulated by the female fish and passed on to the eggs.

  15. Additional Clarification of Intercollegiate Athletics Policy: Three-Part Test. Part Three

    ERIC Educational Resources Information Center

    US Department of Education, 2005

    2005-01-01

    This Additional Clarification, "User's Guide to Developing Student Interest Surveys Under Title IX" (User's Guide), and related technical report are resources to assist institutions in meeting their compliance obligations. Taken together, they serve to clarify many of the factors OCR will consider under part three, and to facilitate compliance…

  16. Testing a Gender Additive Model: The Role of Body Image in Adolescent Depression

    ERIC Educational Resources Information Center

    Bearman, Sarah Kate; Stice, Eric

    2008-01-01

    Despite consistent evidence that adolescent girls are at greater risk of developing depression than adolescent boys, risk factor models that account for this difference have been elusive. The objective of this research was to examine risk factors proposed by the "gender additive" model of depression that attempts to partially explain the increased…

  17. Thermoregulatory response to an organophosphate and carbamate insecticide mixture: testing the assumption of dose-additivity.

    PubMed

    Gordon, Christopher J; Herr, David W; Gennings, Chris; Graff, Jaimie E; McMurray, Matthew; Stork, LeAnna; Coffey, Todd; Hamm, Adam; Mack, Cina M

    2006-01-01

    Most toxicity data are based on studies using single compounds. This study assessed if there is an interaction between mixtures of the anticholinesterase insecticides chlorpyrifos (CHP) and carbaryl (CAR) using hypothermia and cholinesterase (ChE) inhibition as toxicological endpoints. Core temperature (T(c)) was continuously monitored by radiotelemetry in adult Long-Evans rats administered CHP at doses ranging from 0 to 50mg/kg and CAR doses of 0-150 mg/kg. The temperature index (TI), an integration of the change in T(c) over a 12h period, was quantified. Effects of mixtures of CHP and CAR in 2:1 and 1:1 ratios on the TI were examined and the data analyzed using a statistical model designed to assess significant departures from additivity for chemical mixtures. CHP and CAR elicited a marked hypothermia and dose-related decrease in the TI. The TI response to a 2:1 ratio of CHP:CAR was significantly less than that predicted by additivity. The TI response to a 1:1 ratio of CHP and CAR was not significantly different from the predicted additivity. Plasma and brain ChE activity were measured 4h after dosing with CHP, CAR, and mixtures in separate groups of rats. There was a dose-additive interaction for the inhibition of brain ChE for the 2:1 ratio, but an antagonistic effect for the 1:1 ratio. The 2:1 and 1:1 mixtures had an antagonistic interaction on plasma ChE. Overall, the departures from additivity for the physiological (i.e., temperature) and biochemical (i.e., ChE inhibition) endpoints for the 2:1 and 1:1 mixtures studies did not coincide as expected. An interaction between CHP and CAR appears to depend on the ratio of compounds in the mixture as well as the biological endpoint. PMID:16182429

  18. 75 FR 4323 - Additional Quantitative Fit-testing Protocols for the Respiratory Protection Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-27

    ... performed particle counts on samples collected during the Study. Table 1 provides the exercise and sampling... revised PortaCount quantitative fit-testing protocols are not sufficiently accurate or reliable to include...) to Appendix A of ] its Respiratory Protection Standard (see 69 FR 46986). OSHA also published...

  19. 49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... target so as to suffer the maximum damage to its containment. The height of the drop measured from the lowest part of the packaging specimen to the upper surface of the target must be 9 m (30 feet) or greater. The target must be as specified in § 173.465(c)(5). (2) Penetration test. The specimen must...

  20. 49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... target so as to suffer the maximum damage to its containment. The height of the drop measured from the lowest part of the packaging specimen to the upper surface of the target must be 9 m (30 feet) or greater. The target must be as specified in § 173.465(c)(5). (2) Penetration test. The specimen must...

  1. 49 CFR 173.466 - Additional tests for Type A packagings designed for liquids and gases.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... target so as to suffer the maximum damage to its containment. The height of the drop measured from the lowest part of the packaging specimen to the upper surface of the target must be 9 m (30 feet) or greater. The target must be as specified in § 173.465(c)(5). (2) Penetration test. The specimen must...

  2. Testing the Limits: The Purposes and Effects of Additional, External Elementary Mathematics Assessment

    ERIC Educational Resources Information Center

    Lombardi, Karen Ann

    2011-01-01

    This mixed-methods case study focuses on the third through fifth grade classrooms at a public elementary school in a Midwestern urban school district where the Northwest Evaluation Association's (NWEA) Measures of Academic Progress (MAP) assessment is being implemented. According to the school district, the goals of these tests are: to show…

  3. Validation and Estimation of Additive Genetic Variation Associated with DNA Tests for Quantitative Beef Cattle Traits

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The U.S. National Beef Cattle Evaluation Consortium (NBCEC) has been involved in the validation of commercial DNA tests for quantitative beef quality traits since their first appearance on the U.S. market in the early 2000s. The NBCEC Advisory Council initially requested that the NBCEC set up a syst...

  4. Software for Information Storage and Retrieval Tested, Evaluated and Compared: Part VI--Various Additional Programs.

    ERIC Educational Resources Information Center

    Sieverts, Eric G.; And Others

    1993-01-01

    Reports on tests evaluating nine microcomputer software packages designed for information storage and retrieval: BRS-Search, dtSearch, InfoBank, Micro-OPC, Q&A, STN-PFS, Strix, TINman, and ZYindex. Tables and narrative evaluations detail results related to security, hardware, user features, search capability, indexing, input, maintenance of files,…

  5. 75 FR 2122 - Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-14

    ...) standard HRF-1-1979 (HRF-1). See Appendix A1, section 2.2; 47 FR 34517 (Aug. 10, 1982). HRF-1 specifies... ensure the consistent application of DOE's current test procedure to refrigerator-freezers with French doors, bottom-mounted freezers, and through-the-door (TTD) ice service (French door TTD models)....

  6. Terahertz imaging and tomography as efficient instruments for testing polymer additive manufacturing objects.

    PubMed

    Perraud, J B; Obaton, A F; Bou-Sleiman, J; Recur, B; Balacey, H; Darracq, F; Guillet, J P; Mounaix, P

    2016-05-01

    Additive manufacturing (AM) technology is not only used to make 3D objects but also for rapid prototyping. In industry and laboratories, quality controls for these objects are necessary though difficult to implement compared to classical methods of fabrication because the layer-by-layer printing allows for very complex object manufacturing that is unachievable with standard tools. Furthermore, AM can induce unknown or unexpected defects. Consequently, we demonstrate terahertz (THz) imaging as an innovative method for 2D inspection of polymer materials. Moreover, THz tomography may be considered as an alternative to x-ray tomography and cheaper 3D imaging for routine control. This paper proposes an experimental study of 3D polymer objects obtained by additive manufacturing techniques. This approach allows us to characterize defects and to control dimensions by volumetric measurements on 3D data reconstructed by tomography.

  7. Terahertz imaging and tomography as efficient instruments for testing polymer additive manufacturing objects.

    PubMed

    Perraud, J B; Obaton, A F; Bou-Sleiman, J; Recur, B; Balacey, H; Darracq, F; Guillet, J P; Mounaix, P

    2016-05-01

    Additive manufacturing (AM) technology is not only used to make 3D objects but also for rapid prototyping. In industry and laboratories, quality controls for these objects are necessary though difficult to implement compared to classical methods of fabrication because the layer-by-layer printing allows for very complex object manufacturing that is unachievable with standard tools. Furthermore, AM can induce unknown or unexpected defects. Consequently, we demonstrate terahertz (THz) imaging as an innovative method for 2D inspection of polymer materials. Moreover, THz tomography may be considered as an alternative to x-ray tomography and cheaper 3D imaging for routine control. This paper proposes an experimental study of 3D polymer objects obtained by additive manufacturing techniques. This approach allows us to characterize defects and to control dimensions by volumetric measurements on 3D data reconstructed by tomography. PMID:27140357

  8. A test of the intergenerational conflict model in Indonesia shows no evidence of earlier menopause in female-dispersing groups

    PubMed Central

    Snopkowski, Kristin; Moya, Cristina; Sear, Rebecca

    2014-01-01

    Menopause remains an evolutionary puzzle, as humans are unique among primates in having a long post-fertile lifespan. One model proposes that intergenerational conflict in patrilocal populations favours female reproductive cessation. This model predicts that women should experience menopause earlier in groups with an evolutionary history of patrilocality compared with matrilocal groups. Using data from the Indonesia Family Life Survey, we test this model at multiple timescales: deep historical time, comparing age at menopause in ancestrally patrilocal Chinese Indonesians with ancestrally matrilocal Austronesian Indonesians; more recent historical time, comparing age at menopause in ethnic groups with differing postmarital residence within Indonesia and finally, analysing age at menopause at an individual-level, assuming a woman facultatively adjusts her age at menopause based on her postmarital residence. We find a significant effect only at the intermediate timescale where, contrary to predictions, ethnic groups with a history of multilocal postnuptial residence (where couples choose where to live) have the slowest progression to menopause, whereas matrilocal and patrilocal ethnic groups have similar progression rates. Multilocal residence may reduce intergenerational conflicts between women, thus influencing reproductive behaviour, but our results provide no support for the female-dispersal model of intergenerational conflict as an explanation of menopause. PMID:24966311

  9. A test of the intergenerational conflict model in Indonesia shows no evidence of earlier menopause in female-dispersing groups.

    PubMed

    Snopkowski, Kristin; Moya, Cristina; Sear, Rebecca

    2014-08-01

    Menopause remains an evolutionary puzzle, as humans are unique among primates in having a long post-fertile lifespan. One model proposes that intergenerational conflict in patrilocal populations favours female reproductive cessation. This model predicts that women should experience menopause earlier in groups with an evolutionary history of patrilocality compared with matrilocal groups. Using data from the Indonesia Family Life Survey, we test this model at multiple timescales: deep historical time, comparing age at menopause in ancestrally patrilocal Chinese Indonesians with ancestrally matrilocal Austronesian Indonesians; more recent historical time, comparing age at menopause in ethnic groups with differing postmarital residence within Indonesia and finally, analysing age at menopause at an individual-level, assuming a woman facultatively adjusts her age at menopause based on her postmarital residence. We find a significant effect only at the intermediate timescale where, contrary to predictions, ethnic groups with a history of multilocal postnuptial residence (where couples choose where to live) have the slowest progression to menopause, whereas matrilocal and patrilocal ethnic groups have similar progression rates. Multilocal residence may reduce intergenerational conflicts between women, thus influencing reproductive behaviour, but our results provide no support for the female-dispersal model of intergenerational conflict as an explanation of menopause.

  10. Tank Tests to Show the Effect Rivet Heads on the Water Performance of a Seaplane-Float

    NASA Technical Reports Server (NTRS)

    Parkinson, J B

    1938-01-01

    A 1/3.5 full-sized model of a seaplane float constructed from lines supplied by the Bureau of Aeronautics, Navy Department, was tested first with smooth painted bottom surfaces and then with round-head rivets, plate laps, and keel plates fitted to simulate the actual bottom of a metal float. A percentage increase in water resistance caused by the added roughness was found to be from 5 to 20 percent at the hump speed and from 15 to 40 percent at high speeds. The effect of the roughness of the afterbody was found to be negligible except at high trims. The model data were extrapolated to full size by the usual method that assumes the forces to vary according to Froude's law and, in the case of the smooth model, by a method of separation that takes into account the effect of scale on the frictional resistance. It was concluded that the effect of rivet heads on the take-off performance of a relatively high-powered float seaplane is of little consequence, but it may be of greater importance in the case of more moderately powered flying boats.

  11. Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing

    SciTech Connect

    Gnäupel-Herold, Thomas; Slotwinski, John; Moylan, Shawn

    2014-02-18

    A stainless steel test artifact produced by Direct Metal Laser Sintering and similar to a proposed standardized test artifact was examined using neutron diffraction. The artifact contained a number of structures with different aspect ratios pertaining to wall thickness, height above base plate, and side length. Through spatial resolutions of the order of one millimeter the volumetric distribution of stresses in several was measured. It was found that the stresses peak in the tensile region around 500 MPa near the top surface, with balancing compressive stresses in the interior. The presence of a support structure (a one millimeter high, thin walled, hence weaker, lattice structure deposited on the base plate, followed by a fully dense AM structure) has only minor effects on the stresses.

  12. A Pilot Test of the Additive Benefits of Physical Exercise to CBT for OCD.

    PubMed

    Rector, Neil A; Richter, Margaret A; Lerman, Bethany; Regev, Rotem

    2015-01-01

    The majority of "responders" to first-line cognitive-behavioural therapy (CBT) and pharmacological treatments for obsessive-compulsive disorder (OCD) are left with residual symptoms that are clinically relevant and disabling. Therefore, there is pressing need for widely accessible efficacious alternative and/or adjunctive treatments for OCD. Accumulating evidence suggests that physical exercise may be one such intervention in the mood and anxiety disorders broadly, although we are aware of only two positive small-scale pilot studies that have tested its clinical benefits in OCD. This pilot study aimed to test the feasibility and preliminary efficacy of adding a structured physical exercise programme to CBT for OCD. A standard CBT group was delivered concurrently with a 12-week customized exercise programme to 11 participants. The exercise regimen was individualized for each participant based on peak heart rate measured using an incremental maximal exercise test. Reports of exercise adherence across the 12-week regimen exceeded 80%. A paired-samples t-test indicated very large treatment effects in Yale-Brown Obsessive-Compulsive Scale scores from pre- to post-treatment in CBT group cohorts led by expert CBT OCD specialists (d = 2.55) and junior CBT clinician non-OCD specialists (d = 2.12). These treatment effects are very large and exceed effects typically observed with individual and group-based CBT for OCD based on leading meta-analytic reviews, as well as previously obtained treatment effects for CBT using the same recruitment protocol without exercise. As such, this pilot work demonstrates the feasibility and significant potential clinical utility of a 12-week aerobic exercise programme delivered in conjunction with CBT for OCD. PMID:25738234

  13. A Pilot Test of the Additive Benefits of Physical Exercise to CBT for OCD.

    PubMed

    Rector, Neil A; Richter, Margaret A; Lerman, Bethany; Regev, Rotem

    2015-01-01

    The majority of "responders" to first-line cognitive-behavioural therapy (CBT) and pharmacological treatments for obsessive-compulsive disorder (OCD) are left with residual symptoms that are clinically relevant and disabling. Therefore, there is pressing need for widely accessible efficacious alternative and/or adjunctive treatments for OCD. Accumulating evidence suggests that physical exercise may be one such intervention in the mood and anxiety disorders broadly, although we are aware of only two positive small-scale pilot studies that have tested its clinical benefits in OCD. This pilot study aimed to test the feasibility and preliminary efficacy of adding a structured physical exercise programme to CBT for OCD. A standard CBT group was delivered concurrently with a 12-week customized exercise programme to 11 participants. The exercise regimen was individualized for each participant based on peak heart rate measured using an incremental maximal exercise test. Reports of exercise adherence across the 12-week regimen exceeded 80%. A paired-samples t-test indicated very large treatment effects in Yale-Brown Obsessive-Compulsive Scale scores from pre- to post-treatment in CBT group cohorts led by expert CBT OCD specialists (d = 2.55) and junior CBT clinician non-OCD specialists (d = 2.12). These treatment effects are very large and exceed effects typically observed with individual and group-based CBT for OCD based on leading meta-analytic reviews, as well as previously obtained treatment effects for CBT using the same recruitment protocol without exercise. As such, this pilot work demonstrates the feasibility and significant potential clinical utility of a 12-week aerobic exercise programme delivered in conjunction with CBT for OCD.

  14. Additive Manufacturing Thermal Performance Testing of Single Channel GRCop-84 SLM Components

    NASA Technical Reports Server (NTRS)

    Garcia, Chance P.; Cross, Matthew

    2014-01-01

    The surface finish found on components manufactured by sinter laser manufacturing (SLM) is rougher (0.013 - 0.0006 inches) than parts made using traditional fabrication methods. Internal features and passages built into SLM components do not readily allow for roughness reduction processes. Alternatively, engineering literature suggests that the roughness of a surface can enhance thermal performance within a pressure drop regime. To further investigate the thermal performance of SLM fabricated pieces, several GRCop-84 SLM single channel components were tested using a thermal conduction rig at MSFC. A 20 kW power source running at 25% duty cycle and 25% power level applied heat to each component while varying water flow rates between 2.1 - 6.2 gallons/min (GPM) at a supply pressure of 550 to 700 psi. Each test was allowed to reach quasi-steady state conditions where pressure, temperature, and thermal imaging data were recorded. Presented in this work are the heat transfer responses compared to a traditional machined OHFC Copper test section. An analytical thermal model was constructed to anchor theoretical models with the empirical data.

  15. Additional Value of CH₄ Measurement in a Combined (13)C/H₂ Lactose Malabsorption Breath Test: A Retrospective Analysis.

    PubMed

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-09-07

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H₂) excretion after an oral dose of lactose. We use a combined (13)C/H₂ lactose breath test that measures breath (13)CO₂ as a measure of lactose digestion in addition to H₂ and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 (13)C/H₂ lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH₄ in addition to H₂ and (13)CO₂. Based on the (13)C/H₂ breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH₄ further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H₂-excretion were found to excrete CH₄. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH₄-concentrations has an added value to the (13)C/H₂ breath test to identify methanogenic subjects with lactose malabsorption or SIBO.

  16. Additional Value of CH₄ Measurement in a Combined (13)C/H₂ Lactose Malabsorption Breath Test: A Retrospective Analysis.

    PubMed

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-09-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H₂) excretion after an oral dose of lactose. We use a combined (13)C/H₂ lactose breath test that measures breath (13)CO₂ as a measure of lactose digestion in addition to H₂ and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 (13)C/H₂ lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH₄ in addition to H₂ and (13)CO₂. Based on the (13)C/H₂ breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH₄ further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H₂-excretion were found to excrete CH₄. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH₄-concentrations has an added value to the (13)C/H₂ breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  17. Formalin treatments pass new tests. Additional notes on the control of ecto-parasitic protozoa

    USGS Publications Warehouse

    1940-01-01

    After the completion of the eхреriments reported recently, in which the efficacy of formalin in controlling infections of Gostia mecatrix was demonstrated, the author was afforded an opportunity to test the value of formalin solutions in combatting established mixed infections of (Gyrodactylus, Tricbodina, Cyclochaeta) and a stalked protozoan on rainbow trout fingerlings. This opportunity was provided through the courtesy and cooperation of Clarence F. Pautzke, Chief Biologist for the Washington State Game Department, and Lee Walters, Superintendent of the Washington State Hatchery at Seward Park, Seattle.

  18. The aspartame story: a model for the clinical testing of a food additive.

    PubMed

    Stegink, L D

    1987-07-01

    Toxicology is based on the premise that all compounds are toxic at some dose. Thus, it is not surprising that very large doses of aspartame (or its components--aspartate, phenylalanine, and methanol) produce deleterious effects in sensitive animal species. The critical question is whether aspartame ingestion is potentially harmful to humans at normal use and potential abuse levels. This paper reviews clinical studies testing the effects of various doses of aspartame upon blood levels of aspartate, phenylalanine, and methanol. These studies demonstrate that blood levels of these compounds are well below levels associated with adverse effects in sensitive animal species.

  19. [Study on Extraction Conditions of Water-Soluble Substances—Purity Test (4) for Polyvinylpolypyrrolidone Listed in Japan's Specifications and Standards for Food Additives].

    PubMed

    Yanagi, Tokue; Matsumoto, Makoto; Shimizu, Sachiko; Iwamura, Tetsuro; Ogaki, Mamiko

    2015-01-01

    The food additive polyvinylpolypyrrolidone is approved for use as a filter aid. The water-soluble substances test of polyvinylpolypyrrolidone often shows poor reproducibility. The instruction "boil gently while stirring using a stirrer" was considered critical, and so this issue was examined. The results showed that the use of a combination of both an oil bath and a stirrer provided good reproducibility without decomposition or other problems.

  20. Extractive phase vanishing reactions with dichloromethane, perfluorohexanes, and dibromoethane: slow addition in a test tube.

    PubMed

    Curran, Dennis P; Werner, Stefan

    2004-03-18

    [reaction: see text] Partition coefficient measurements and experiments with a dye show that a new fluorous "phase vanishing reaction" described by Jana and Verkade occurs by an extractive mechanism. This mechanism is contrasted with the original diffusive phase-vanishing reactions introduced by Ryu and co-workers.

  1. Smell testing: an additional tool for identification of adult Refsum's disease

    PubMed Central

    Gibberd, F; Feher, M; Sidey, M; Wierzbicki, A

    2004-01-01

    Objective: To investigate the prevalence and degree of olfactory dysfunction in patients with ARD. Method: The olfactory function of 16 patients with ARD was assessed using the quantitative University of Pennsylvania Smell Identification Test (UPSIT). Results: All patients had complete anosmia or grossly impaired smell function with a mean UPSIT score of 14.7 (SD 4.7) (normal>34) despite having been treated with an appropriate diet for a median of 15 years (range 1–25). Conclusions: Identification of ARD patients can be facilitated by using the UPSIT in combination with the presence of retinitis pigmentosa, even if they have no neurological or bony features. Phytanic acid screening should be performed in any patient manifesting these two signs. PMID:15314127

  2. Additional testing of the inlets designed for a tandem fan V/STOL nacelle

    NASA Technical Reports Server (NTRS)

    Ybarra, A. H.

    1981-01-01

    The wind tunnel testing of a scale model of a tandem fan nacelle designed for a type (subsonic cruise) V/STOL aircraft configuration is discussed. The performance for the isolated front inlet and for the combined front and aft inlets is reported. Model variables include front and aft inlets with aft inlet variations of short and long aft inlet cowls, with a shaft simulator and diffuser vortex generators, cowl lip fillets, and nacelle strakes. Inlet pressure recovery, distortion, and inlet angle-to-attack separation limits were evaluated at tunnel velocity from 0 to 240 knots, angles-of-attack from -10 to +40 degrees and inlet flow rates corresponding to throat Mach number from 0.0 to 0.6. Combined nacelle pitch and yaw runs up to 30 deg. were also made.

  3. "The Show"

    ERIC Educational Resources Information Center

    Gehring, John

    2004-01-01

    For the past 16 years, the blue-collar city of Huntington, West Virginia, has rolled out the red carpet to welcome young wrestlers and their families as old friends. They have come to town chasing the same dream for a spot in what many of them call "The Show". For three days, under the lights of an arena packed with 5,000 fans, the state's best…

  4. Additive effect of lithium and clonidine with 5-HT1A agonists in the forced swimming test.

    PubMed

    Hascoet, M; Bourin, M; Khimake, S

    1994-03-01

    1. The aim of the present work was to demonstrate the possible additive effect of lithium and clonidine with 5-HT1a agonists in the forced swimming test. 2. Anti-depressant like effects of 5-HT1a agonists was investigated using forced swimming test. When administered alone, only 8-OH-DPAT reduced the immobility time in mice. 3. 5-HT1a agonists were then tested in combination with clonidine or lithium. Only gepirone and ipsapirone pretreated by either lithium or clonidine reduced immobility time in the forced swimming test. 4. The authors conclude that lithium and clonidine might be useful to predict antidepressant-like activity of new compounds.

  5. Effects of Factor XIII Deficiency on Thromboelastography. Thromboelastography with Calcium and Streptokinase Addition is more Sensitive than Solubility Tests

    PubMed Central

    Martinuzzo, M.; Barrera, L.; Altuna, D.; Baña, F. Tisi; Bieti, J.; Amigo, Q.; D’Adamo, M.; López, M.S.; Oyhamburu, J.; Otaso, J.C.

    2016-01-01

    Background Homozygous or double heterozygous factor XIII (FXIII) deficiency is characterized by soft tissue hematomas, intracranial and delayed spontaneous bleeding. Alterations of thromboelastography (TEG) parameters in these patients have been reported. The aim of the study was to show results of TEG, TEG Lysis (Lys 60) induced by subthreshold concentrations of streptokinase (SK), and to compare them to the clot solubility studies results in samples of a 1-year-old girl with homozygous or double heterozygous FXIII deficiency. Case A year one girl with a history of bleeding from the umbilical cord. During her first year of life, several hematomas appeared in soft upper limb tissue after punctures for vaccination and a gluteal hematoma. One additional sample of a heterozygous patient and three samples of acquired FXIII deficiency were also evaluated. Materials and Methods Clotting tests, von Willebrand factor (vWF) antigen and activity, plasma FXIII-A subunit (pFXIII-A) were measured by an immunoturbidimetric assay in a photo-optical coagulometer. Solubility tests were performed with Ca2+-5 M urea and thrombin-2% acetic acid. Basal and post-FXIII concentrate infusion samples were studied. TEG was performed with CaCl2 or CaCl2 + SK (3.2 U/mL) in a Thromboelastograph. Results Prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time, fibrinogen, factor VIIIc, vWF, and platelet aggregation were normal. Antigenic pFXIII-A subunit was < 2%. TEG, evaluated at diagnosis and post FXIII concentrate infusion (pFXIII-A= 37%), presented a normal reaction time (R), 8 min, prolonged k (14 and 11min respectively), a low Maximum-Amplitude (MA) ( 39 and 52 mm respectively), and Clot Lysis (Lys60) slightly increased (23 and 30% respectively). In the sample at diagnosis, clot solubility was abnormal, 50 and 45 min with Ca-Urea and thrombin-acetic acid, respectively, but normal (>16 hours) 1-day post-FXIII infusion. Analysis of FXIII deficient and normal

  6. Effects of Factor XIII Deficiency on Thromboelastography. Thromboelastography with Calcium and Streptokinase Addition is more Sensitive than Solubility Tests

    PubMed Central

    Martinuzzo, M.; Barrera, L.; Altuna, D.; Baña, F. Tisi; Bieti, J.; Amigo, Q.; D’Adamo, M.; López, M.S.; Oyhamburu, J.; Otaso, J.C.

    2016-01-01

    Background Homozygous or double heterozygous factor XIII (FXIII) deficiency is characterized by soft tissue hematomas, intracranial and delayed spontaneous bleeding. Alterations of thromboelastography (TEG) parameters in these patients have been reported. The aim of the study was to show results of TEG, TEG Lysis (Lys 60) induced by subthreshold concentrations of streptokinase (SK), and to compare them to the clot solubility studies results in samples of a 1-year-old girl with homozygous or double heterozygous FXIII deficiency. Case A year one girl with a history of bleeding from the umbilical cord. During her first year of life, several hematomas appeared in soft upper limb tissue after punctures for vaccination and a gluteal hematoma. One additional sample of a heterozygous patient and three samples of acquired FXIII deficiency were also evaluated. Materials and Methods Clotting tests, von Willebrand factor (vWF) antigen and activity, plasma FXIII-A subunit (pFXIII-A) were measured by an immunoturbidimetric assay in a photo-optical coagulometer. Solubility tests were performed with Ca2+-5 M urea and thrombin-2% acetic acid. Basal and post-FXIII concentrate infusion samples were studied. TEG was performed with CaCl2 or CaCl2 + SK (3.2 U/mL) in a Thromboelastograph. Results Prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time, fibrinogen, factor VIIIc, vWF, and platelet aggregation were normal. Antigenic pFXIII-A subunit was < 2%. TEG, evaluated at diagnosis and post FXIII concentrate infusion (pFXIII-A= 37%), presented a normal reaction time (R), 8 min, prolonged k (14 and 11min respectively), a low Maximum-Amplitude (MA) ( 39 and 52 mm respectively), and Clot Lysis (Lys60) slightly increased (23 and 30% respectively). In the sample at diagnosis, clot solubility was abnormal, 50 and 45 min with Ca-Urea and thrombin-acetic acid, respectively, but normal (>16 hours) 1-day post-FXIII infusion. Analysis of FXIII deficient and normal

  7. Some arguments in favor of a Myriophyllum aquaticum growth inhibition test in a water-sediment system as an additional test in risk assessment of herbicides.

    PubMed

    Tunić, Tanja; Knežević, Varja; Kerkez, Đurđa; Tubić, Aleksandra; Šunjka, Dragana; Lazić, Sanja; Brkić, Dragica; Teodorović, Ivana

    2015-09-01

    The present study compares the practicability, reproducibility, power, and sensitivity of a Myriophyllum aquaticum growth inhibition test in a water-sediment system with the recently accepted Myriophyllum spicatum test in an equivalent testing system and the standard Lemna sp. test. Special consideration was given to endpoints based on M. aquaticum control plant growth and variability of relative growth rate and yield: shoot length, fresh weight, dry weight, and root weight. Sensitivity analysis was based on tests performed with 3,5-dichlorophenol, atrazine, isoproturon, trifluralin, 2,4-dichlorophenoloxyacetic acid, and dicamba. Growth rates for average M. aquaticum control plants were 0.119 d(-1) and 0.112 d(-1), with average estimated doubling time 6.33 d and 6.74 d for relative growth rate fresh weight and shoot length, respectively. Intrinsic variability of M. aquaticum endpoints was low: 12.9%, 12.5%, and 17.8% for relative growth rate shoot length, relative growth rate fresh weight and yield fresh weight, respectively. The power of the test was fairly high. When the most sensitive endpoints were used for comparison, the 2 Myriophyllum species were similarly sensitive, more sensitive (in the case of auxin simulators), or at least equally sensitive as Lemna minor to other tested herbicides. The M. aquaticum 10-d test with a 7-d exposure period in a water-sediment system has acceptable sensitivity and can provide repeatable, reliable, and reproducible results; therefore, it should not be disregarded as a good and representative additional test in environmental risk assessment. PMID:25943248

  8. Some arguments in favor of a Myriophyllum aquaticum growth inhibition test in a water-sediment system as an additional test in risk assessment of herbicides.

    PubMed

    Tunić, Tanja; Knežević, Varja; Kerkez, Đurđa; Tubić, Aleksandra; Šunjka, Dragana; Lazić, Sanja; Brkić, Dragica; Teodorović, Ivana

    2015-09-01

    The present study compares the practicability, reproducibility, power, and sensitivity of a Myriophyllum aquaticum growth inhibition test in a water-sediment system with the recently accepted Myriophyllum spicatum test in an equivalent testing system and the standard Lemna sp. test. Special consideration was given to endpoints based on M. aquaticum control plant growth and variability of relative growth rate and yield: shoot length, fresh weight, dry weight, and root weight. Sensitivity analysis was based on tests performed with 3,5-dichlorophenol, atrazine, isoproturon, trifluralin, 2,4-dichlorophenoloxyacetic acid, and dicamba. Growth rates for average M. aquaticum control plants were 0.119 d(-1) and 0.112 d(-1), with average estimated doubling time 6.33 d and 6.74 d for relative growth rate fresh weight and shoot length, respectively. Intrinsic variability of M. aquaticum endpoints was low: 12.9%, 12.5%, and 17.8% for relative growth rate shoot length, relative growth rate fresh weight and yield fresh weight, respectively. The power of the test was fairly high. When the most sensitive endpoints were used for comparison, the 2 Myriophyllum species were similarly sensitive, more sensitive (in the case of auxin simulators), or at least equally sensitive as Lemna minor to other tested herbicides. The M. aquaticum 10-d test with a 7-d exposure period in a water-sediment system has acceptable sensitivity and can provide repeatable, reliable, and reproducible results; therefore, it should not be disregarded as a good and representative additional test in environmental risk assessment.

  9. Implementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects.

    PubMed

    Gamal El-Dien, Omnia; Ratcliffe, Blaise; Klápště, Jaroslav; Porth, Ilga; Chen, Charles; El-Kassaby, Yousry A

    2016-03-01

    The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates' offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of "half-sibling" in OP families may often be violated. We compared the pedigree- vs. marker-based genetic models by analysing 22-yr height and 30-yr wood density for 214 white spruce [Picea glauca (Moench) Voss] OP families represented by 1694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all nonadditive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree-based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits even under simple and shallow pedigree structure.

  10. Implementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects

    PubMed Central

    Gamal El-Dien, Omnia; Ratcliffe, Blaise; Klápště, Jaroslav; Porth, Ilga; Chen, Charles; El-Kassaby, Yousry A.

    2016-01-01

    The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates’ offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of “half-sibling” in OP families may often be violated. We compared the pedigree- vs. marker-based genetic models by analysing 22-yr height and 30-yr wood density for 214 white spruce [Picea glauca (Moench) Voss] OP families represented by 1694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all nonadditive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree-based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits even under simple and shallow pedigree structure. PMID:26801647

  11. Implementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects.

    PubMed

    Gamal El-Dien, Omnia; Ratcliffe, Blaise; Klápště, Jaroslav; Porth, Ilga; Chen, Charles; El-Kassaby, Yousry A

    2016-03-01

    The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates' offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of "half-sibling" in OP families may often be violated. We compared the pedigree- vs. marker-based genetic models by analysing 22-yr height and 30-yr wood density for 214 white spruce [Picea glauca (Moench) Voss] OP families represented by 1694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all nonadditive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree-based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits even under simple and shallow pedigree structure. PMID:26801647

  12. Stabilization of inorganic mixed waste to pass the TCLP and STLC tests using clay and pH-insensitive additives

    SciTech Connect

    Bowers, J.S.; Anson, J.R.; Painter, S.M.

    1995-12-31

    Stabilization is a best demonstrated available technology, or BDAT. This technology traps toxic contaminants in a matrix so that they do not leach into the environment. The stabilization process routinely uses pozzolanic materials. Portland cement, fly ash-lime mixes, gypsum cements, and clays are some of the most common materials. In many instances, materials that can pass the Toxicity Characteristic Leaching Procedure (TCLP the federal leach test) or the Soluble Threshold Leachate Concentration (STLC the California leach test) must have high concentrations of lime or other caustic material because of the low pH of the leaching media. Both leaching media, California`s and EPA`s, have a pH of 5.0. California uses citric acid and sodium citrate while EPA uses acetic acid and sodium acetate. The concentration in the leachate is approximately ten times higher for the STLC procedure than the TCLP. These media can form ligands that provide excellent metal leaching. Because of the aggressive nature of the leaching medium, stabilized wastes in many cases will not pass the leaching tests. At the Lawrence Livermore National Laboratory (LLNL), additives such as dithiocarbamates and thiocarbonates, which are pH-insensitive and provide resistance to ligand formation, are used in the waste stabilization process. Attapulgite, montmorillonite, and sepiolite clays are used because they are forgiving (recipe can be adjusted before the matrix hardens) when formulating a stabilization matrix, and they have a neutral pH. By using these clays and additives, LLNL`s highly concentrated wastewater treatment sludges have passed the TCLP and STLC tests. The most frequently used stabilization process consists of a customized recipe involving waste sludge, clay and dithiocarbamate salt, mixed with a double planetary mixer into a pasty consistency. TCLP and STLC data on this waste matrix have shown that the process matrix meets land disposal requirements.

  13. High SO{sub 2} removal efficiency testing. Topical report - results of sodium formate additive tests at New York State Electric & Gas Corporation`s Kintigh Station

    SciTech Connect

    Murphy, J.

    1997-02-14

    Tests were conducted at New York State Gas & Electric`s (NYSEG`s) Kintigh Station to evaluate options for achieving high sulfur dioxide (SO{sub 2}) removal efficiency in the wet limestone flue gas desulfurization (FGD) system. This test program was one of six conducted by the U.S. Department of Energy to evaluate low-capital-cost upgrades to existing FGD systems as a means for utilities to comply with the requirements of the 1990 Clean Air Act Amendments. The upgrade option tested at Kintigh was sodium formate additive. Results from the tests were used to calibrate the Electric Power Research Institute`s (EPRI) FGD PRocess Integration and Simulation Model (FGDPRISM) to the Kintigh scrubber configuration. FGDPRISM was then used to predict system performance for evaluating conditions other than those tested. An economic evaluation was then done to determine the cost effectiveness of various high-efficiency upgrade options. These costs can be compared with the estimated market value of SO{sub 2} allowance or the expected costs of allowances generated by other means, such as fuel switching or new scrubbers, to arrive at the most cost-effective strategy for Clean Air Act compliance.

  14. Interfacial Reactions of Zn-Al Alloys with Na Addition on Cu Substrate During Spreading Test and After Aging Treatments

    NASA Astrophysics Data System (ADS)

    Gancarz, Tomasz; Pstruś, Janusz; Berent, Katarzyna

    2016-08-01

    Spreading tests for Cu substrate with Zn-Al eutectic-based alloys with 0.2, 0.5, and 1.0 wt.% of Na were studied using the sessile drop method in the presence of QJ201 flux. Spreading tests were performed for 1, 3, 8, 15, 30, and 60 min of contact, at the temperatures of 475, 500, 525, and 550 °C. After cleaning the flux residue from solidified samples, the spreading area of Zn-Al + Na on Cu was determined in accordance with ISO 9455-10:2013-03. Selected, solidified solder-substrate couples were cross-sectioned and subjected to scanning electron microscopy of the interfacial microstructure. The experiment was designed to demonstrate the effect of Na addition on the kinetics of formation and growth of CuZn, Cu5Zn8, and CuZn4 phases, which were identified using x-ray diffraction and energy-dispersive spectroscopy analysis. The addition of Na to eutectic Zn-Al caused the spreading area to decrease and the thickness of intermetallic compound layers at the interface to reduce. Samples after the spreading test at 500 °C for 1 min were subjected to aging for 1, 10, and 30 days at 120,170, and 250 °C. The greater thicknesses of IMC layers were obtained for a temperature of 250 °C. With increasing Na content in Zn-Al + Na alloys, the thickness reduced, which correlates to the highest value of activation energy for Zn-Al with 1% Na.

  15. Interfacial Reactions of Zn-Al Alloys with Na Addition on Cu Substrate During Spreading Test and After Aging Treatments

    NASA Astrophysics Data System (ADS)

    Gancarz, Tomasz; Pstruś, Janusz; Berent, Katarzyna

    2016-04-01

    Spreading tests for Cu substrate with Zn-Al eutectic-based alloys with 0.2, 0.5, and 1.0 wt.% of Na were studied using the sessile drop method in the presence of QJ201 flux. Spreading tests were performed for 1, 3, 8, 15, 30, and 60 min of contact, at the temperatures of 475, 500, 525, and 550 °C. After cleaning the flux residue from solidified samples, the spreading area of Zn-Al + Na on Cu was determined in accordance with ISO 9455-10:2013-03. Selected, solidified solder-substrate couples were cross-sectioned and subjected to scanning electron microscopy of the interfacial microstructure. The experiment was designed to demonstrate the effect of Na addition on the kinetics of formation and growth of CuZn, Cu5Zn8, and CuZn4 phases, which were identified using x-ray diffraction and energy-dispersive spectroscopy analysis. The addition of Na to eutectic Zn-Al caused the spreading area to decrease and the thickness of intermetallic compound layers at the interface to reduce. Samples after the spreading test at 500 °C for 1 min were subjected to aging for 1, 10, and 30 days at 120,170, and 250 °C. The greater thicknesses of IMC layers were obtained for a temperature of 250 °C. With increasing Na content in Zn-Al + Na alloys, the thickness reduced, which correlates to the highest value of activation energy for Zn-Al with 1% Na.

  16. High SO{sub 2} removal efficiency testing: Results of DBA and sodium formate additive tests at Southwestern Electric Power company`s Pirkey Station

    SciTech Connect

    1996-05-30

    Tests were conducted at Southwestern Electric Power Company`s (SWEPCo) Henry W. Pirkey Station wet limestone flue gas desulfurization (FGD) system to evaluate options for achieving high sulfur dioxide removal efficiency. The Pirkey FGD system includes four absorber modules, each with dual slurry recirculation loops and with a perforated plate tray in the upper loop. The options tested involved the use of dibasic acid (DBA) or sodium formate as a performance additive. The effectiveness of other potential options was simulated with the Electric Power Research Institute`s (EPRI) FGD PRocess Integration and Simulation Model (FGDPRISM) after it was calibrated to the system. An economic analysis was done to determine the cost effectiveness of the high-efficiency options. Results are-summarized below.

  17. Additional Testing of the DHC-6 Twin Otter Tailplane Iced Airfoil Section in the Ohio State University 7x10 Low Speed Wind Tunnel. Volume 2

    NASA Technical Reports Server (NTRS)

    Gregorek, Gerald; Dresse, John J.; LaNoe, Karine; Ratvasky, Thomas (Technical Monitor)

    2000-01-01

    The need for fundamental research in Ice Contaminated Tailplane Stall (ICTS) was established through three international conferences sponsored by the FAA. A joint NASA/FAA Tailplane Icing Program was formed in 1994 with the Ohio State University playing a critical role for wind tunnel and analytical research. Two entries of a full-scale 2-dimensional tailplane airfoil model of a DHC-6 Twin Otter were made in The Ohio State University 7x10 ft wind tunnel. This report describes the second test entry that examined additional ice shapes and roughness, as well as airfoil section differences. The addition data obtained in this test fortified the original database of aerodynamic coefficients that permit a detailed analysis of flight test results with an OSU-developed analytical program. The testing encompassed a full range of angles of attack and elevator deflections at flight Reynolds number conditions. Aerodynamic coefficients, C(L), C(M), and C(He), were obtained by integrating static pressure coefficient, C(P), values obtained from surface taps. Comparisons of clean and iced airfoil results show a significant decrease in the tailplane aeroperformance (decreased C(Lmax), decreased stall angle, increased C(He)) for all ice shapes with the grit having the lease affect and the LEWICE shape having the greatest affect. All results were consistent with observed tailplane stall phenomena and constitute an effective set of data for comprehensive analysis of ICTS.

  18. mGluR3 knockout mice show a working memory defect and an enhanced response to MK-801 in the T- and Y-maze cognitive tests.

    PubMed

    Lainiola, Mira; Procaccini, Chiara; Linden, Anni-Maija

    2014-06-01

    Polymorphisms in the metabotropic glutamate receptor 3 (mGluR3) encoding gene GRM3 have been linked to schizophrenia and cognitive performance in humans. Our aim was to analyze the role of mGluR3 in basal working memory and attentional processes, and also when these functions were distracted by the psychotomimetic N-methyl-d-aspartate (NMDA) receptor antagonist dizocilpine (MK-801). mGluR3 knockout (KO) mice were used. Spontaneous alternation in a T-maze test was significantly reduced in mGluR3-KO mice compared to wildtype (WT) mice, particularly after a low dose of MK-801 (0.03 mg/kg, i.p., 30 min). In a Y-maze novelty discrimination test, the locomotor stimulatory effect of MK-801 (0.1mg/kg) was enhanced in mGluR3-KO mice. Interestingly, mGluR3-KO mice showed the significantly reduced alternation in the spontaneous alternation T-maze test and the significantly enhanced sensitivity to MK-801 in the Y-maze test only when forced to enter the right arm first, not when the forced arm was on the left. A side-biased response was also found in a rewarded alternation T-maze test, where mGluR3-KO mice made significantly more incorrect visits to the left arm than the right arm after a 25-s delay. No genotype difference was found in the novelty discrimination in the Y-maze test, rewarded alternation with a 5-s delay, preference for left or right when free to enter either arm or in MK-801-induced circling. Our findings indicate cognitive disturbance and left-right asymmetry in certain behavioral responses of mGluR3-KO mice. This novel observation warrants further elucidation, and should also be considered in other studies of mGluR3 in brain functions.

  19. mGluR3 knockout mice show a working memory defect and an enhanced response to MK-801 in the T- and Y-maze cognitive tests.

    PubMed

    Lainiola, Mira; Procaccini, Chiara; Linden, Anni-Maija

    2014-06-01

    Polymorphisms in the metabotropic glutamate receptor 3 (mGluR3) encoding gene GRM3 have been linked to schizophrenia and cognitive performance in humans. Our aim was to analyze the role of mGluR3 in basal working memory and attentional processes, and also when these functions were distracted by the psychotomimetic N-methyl-d-aspartate (NMDA) receptor antagonist dizocilpine (MK-801). mGluR3 knockout (KO) mice were used. Spontaneous alternation in a T-maze test was significantly reduced in mGluR3-KO mice compared to wildtype (WT) mice, particularly after a low dose of MK-801 (0.03 mg/kg, i.p., 30 min). In a Y-maze novelty discrimination test, the locomotor stimulatory effect of MK-801 (0.1mg/kg) was enhanced in mGluR3-KO mice. Interestingly, mGluR3-KO mice showed the significantly reduced alternation in the spontaneous alternation T-maze test and the significantly enhanced sensitivity to MK-801 in the Y-maze test only when forced to enter the right arm first, not when the forced arm was on the left. A side-biased response was also found in a rewarded alternation T-maze test, where mGluR3-KO mice made significantly more incorrect visits to the left arm than the right arm after a 25-s delay. No genotype difference was found in the novelty discrimination in the Y-maze test, rewarded alternation with a 5-s delay, preference for left or right when free to enter either arm or in MK-801-induced circling. Our findings indicate cognitive disturbance and left-right asymmetry in certain behavioral responses of mGluR3-KO mice. This novel observation warrants further elucidation, and should also be considered in other studies of mGluR3 in brain functions. PMID:24631392

  20. Stabilization of inorganic mixed waste to pass the TCLP and STLC tests using clay and pH-insensitive additives

    SciTech Connect

    Bowers, J.S.; Anson, S.M.; Painter, S.M.

    1995-09-01

    Stabilization is a best demonstrated available technology, or BDAT, as defined by the U.S. Environmental Protection Agency (EPA) in Title 40, part 268, of the Code of Federal Regulations (40 CFR 268). This technology traps toxic contaminants (usually both chemically and physically) in a matrix so that they do not. leach into the environment. Typical contaminants that are trapped by stabilization are metals (mostly transition metals) that exhibit the characteristic of toxicity as defined by 40 CFR part 261. The stabilization process routinely uses pozzolanic materials. Portland cement, fly ash-lime mixes, gypsum cements, and clays are some of the most common materials. They are inexpensive, easy to use, and effective for wastes containing low concentrations of toxic materials. At the Lawrence Livermore National Laboratory (LLNL), additives such as dithiocarbamates and thiocarbonates, which are pH-insensitive and provide resistance to ligand formation are used in the waste stabilization process. Attapulgite, montmorillonite, and sepiolite clays are used because they are forgiving (recipe can be adjusted before the matrix hardens) when formulating a stabilization matrix, and they have a neutral pH. By using these clays and additives, LLNL`s highly concentrated wastewater treatment sludges have passed the TCLP and STLC tests. The most frequently used stabilization process consists of a customized recipe involving waste sludge, clay and dithiocarbamate salt, mixed with a double planetary mixer into a pasty consistency. TCLP and STLC data on this waste matrix have shown that the process matrix meets land disposal requirements.

  1. Stabilization of inorganic mixed waste to pass the TCLP and STLC tests using clay and pH-insensitive additives

    SciTech Connect

    Bowers, J.S.; Anson, J.R.; Painter, S.M.; Maitino, R.E.

    1995-03-01

    Stabilization traps toxic contaminants (usually both chemically and physically) in a matrix so that they do not leach into the environment. Typical contaminants are metals (mostly transition metals) that exhibit the characteristic of toxicity. The stabilization process routinely uses pozzolanic materials. Portland cement, fly ash-lime mixes, gypsum cements, and clays are some of the most common materials. In many instances, materials that can pass the Toxicity Characteristic Leaching Procedure (TCLP-the federal leach test) or the Soluble Threshold Leachate Concentration (STLC-the California leach test) must have high concentrations of lime or other caustic material because of the low pH of the leaching media. Both leaching media, California`s and EPA`s, have a pH of 5.0. California uses citric acid and sodium citrate while EPA uses acetic acid and sodium acetate. These media can form ligands that provide excellent metal leaching. Because of the aggressive nature of the leaching medium, stabilized wastes in many cases will not pass the leaching tests. At the Lawrence Livermore National Laboratory, additives such as dithiocarbamates and thiocarbonates, which are pH-insensitive and provide resistance to ligand formation, are used in the waste stabilization process. Attapulgite, montmorillonite, and sepiolite clays are used because they are forgiving (recipe can be adjusted before the matrix hardens). The most frequently used stabilization process consists of a customized recipe involving waste sludge, clay and dithiocarbamate salt, mixed with a double planetary mixer into a pasty consistency. TCLP and STLC data on this waste matrix have shown that the process matrix meets land disposal requirements.

  2. Immunohistological profile of the Ras homologous B protein (RhoB) in human testes showing normal spermatogenesis, spermatogenic arrest and Sertoli cell only syndrome.

    PubMed

    Adly, Mohamed A; Hussein, Mahmoud Rezk Abdelwahed

    2010-09-01

    Ras homologous B protein (RhoB) belongs to the Ras homologous subfamily which consists of low molecular weight (21 kDa) GTP-binding proteins. Rho proteins are regulatory molecules associated with various kinases and as such they mediate changes in cell shape, contractility, motility and gene expression. To date, no data are available about the expression pattern of RhoB protein in the human testis showing normal and abnormal spermatogenesis. The present study addresses these issues. Human testicular biopsy specimens were obtained from patients suffering from post-testicular infertility (testis showing normal spermatogenesis, 10 cases) and testicular infertility (testis showing Sertoli cell only syndrome and spermatogenic arrest, 10 patients each). The expression of RhoB was examined using in situ immunofluorescent staining methods. In testes showing normal spermatogenesis, RhoB had a strong expression in the seminiferous epithelium (cytoplasm of Sertoli-cells, spermatogonia and spermatocytes) and in the interstitium (Leydig cells). RhoB expression was weak in the myofibroblasts and absent in the spermatids and sperms. In the testes showing abnormal spermatogenesis, RhoB expression was moderate in the seminiferous epithelium (cytoplasm of Sertoli cells, spermatogonia and spermatocytes) and was completely absent in the Leydig cells, myofibroblasts, spermatids and sperms. To the best of our knowledge, this study provides the first morphological indication that RhoB protein is expressed in human testis and its expression undergoes testicular infertility associated changes. These findings suggest the involvement of RhoB in the process of spermatogenesis in human and their possible therapeutic ramifications in testicular infertility are open for further investigations.

  3. Serum Basal Paraoxonase 1 Activity as an Additional Liver Function Test for the Evaluation of Patients with Chronic Hepatitis

    PubMed Central

    Halappa, Chandrakanth K; Pyati, Sudharani A; Nagaraj; Wali, Vinod

    2015-01-01

    Background The diagnostic accuracy of currently available standard panel of liver function tests is not satisfactory for the reliable diagnosis of chronic liver disorders. Earlier studies have reported that serum basal paraoxonase 1 (PON1) activity measurement may add a significant contribution to the liver function tests. Aim To assess whether the measurement of serum basal paraoxonase 1 (PON1) activity would be useful as an index of liver function status in chronic hepatitis patients. Materials and Methods The study included 50 chronic hepatitis patients and 50 apparently healthy controls based on inclusion & exclusion criteria. In all the subjects, standard liver function tests were analysed by using standard methods. Basal PON1 activity was estimated using spectrophotometric method by the hydrolysis of p-nitrophenylacetate. Student t-test, Pearson’s correlation coefficient, diagnostic validity tests and ROC curve analysis were the methods used for the statistical analysis of the data. Results The serum basal PON1 activity was significantly decreased in chronic hepatitis cases when compared to controls (p< 0.001). Also basal PON1 activity was positively correlated with serum total protein and albumin, and negatively correlated with serum total bilirubin, alanine amino transferase (ALT), and alkaline phosphatase (ALP) (p< 0.001) in chronic hepatitis cases but not in healthy controls. Diagnostic validity tests showed, basal PON1 activity was a better discriminator of chronic hepatitis than total protein, albumin and ALP with sensitivity of 68%, specificity of 100%, positive predictive value of 100% and negative predictive value of 75%. ROC curve analysis demonstrated highest diagnostic accuracy for ALT (AUC = 0.999) followed by PON1 (AUC = 0.990), total bilirubin (AUC = 0.977), ALP (AUC = 0.904), total protein (AUC = 0.790) and albumin (AUC = 0.595). Conclusion Diagnostic accuracy of serum PON1 activity is better than total bilirubin, total protein, albumin and

  4. Influence of Li Addition to Zn-Al Alloys on Cu Substrate During Spreading Test and After Aging Treatment

    NASA Astrophysics Data System (ADS)

    Gancarz, Tomasz; Pstrus, Janusz; Cempura, Grzegorz; Berent, Katarzyna

    2016-08-01

    The spreading of Zn-Al eutectic-based alloys with 0.05 wt.%, 0.1 wt.%, and 0.2 wt.% Li on Cu substrate has been studied using the sessile drop method in presence of QJ201 flux. Wetting tests were performed after 1 min, 3 min, 8 min, 15 min, 30 min, and 60 min of contact at temperatures of 475°C, 500°C, 525°C, and 550°C. Samples after spreading at 500°C for 1 min were subjected to aging for 1 day, 10 days, and 30 days at temperature of 120°C, 170°C, and 250°C. The spreadability of eutectic Zn-5.3Al alloy with different Li contents on Cu substrate was determined in accordance with ISO 9455-10:2013-03. Selected solidified solder-substrate couples were, after spreading and aging tests, cross-sectioned and subjected to scanning electron microscopy, energy-dispersive spectroscopy (EDS), and x-ray diffraction (XRD) analysis of the interfacial microstructure. An experiment was designed to demonstrate the effect of Li addition on the kinetics of the formation and growth of CuZn, Cu5Zn8, and CuZn4 intermetallic compound (IMC) phases, during spreading and aging. The IMC layers formed at the interface were identified using XRD and EDS analyses. Increasing addition of Li to Zn-Al alloy caused a reduction in the thickness of the IMC layer at the interface during spreading, and an increase during aging. The activation energy was calculated, being found to increase for the Cu5Zn8 phase but decrease for the CuZn and CuZn4 phases with increasing Li content in the Zn-Al-Li alloys. The highest value of 142 kJ mol-1 was obtained for Zn-Al with 1.0 Li during spreading and 69.2 kJ mol-1 for Zn-Al with 0.05 Li during aging. Aging at 250°C caused an increase in only the Cu5Zn8 layer, which has the lowest Gibbs energy in the Cu-Zn system. This result is connected to the high diffusion of Cu from the substrate to the solder.

  5. Patch testing with a new fragrance mix detects additional patients sensitive to perfumes and missed by the current fragrance mix.

    PubMed

    Frosch, Peter J; Pirker, Claudia; Rastogi, Suresh C; Andersen, Klaus E; Bruze, Magnus; Svedman, Cecilia; Goossens, An; White, Ian R; Uter, Wolfgang; Arnau, Elena Giménez; Lepoittevin, Jean-Pierre; Menné, Torkil; Johansen, Jeanne Duus

    2005-04-01

    The currently used 8% fragrance mix (FM I) does not identify all patients with a positive history of adverse reactions to fragrances. A new FM II with 6 frequently used chemicals was evaluated in 1701 consecutive patients patch tested in 6 dermatological centres in Europe. FM II was tested in 3 concentrations - 28% FM II contained 5% hydroxyisohexyl 3-cyclohexene carboxaldehyde (Lyral), 2% citral, 5% farnesol, 5% coumarin, 1% citronellol and 10%alpha-hexyl-cinnamic aldehyde; in 14% FM II, the single constituents' concentration was lowered to 50% and in 2.8% FM II to 10%. Each patient was classified regarding a history of adverse reactions to fragrances: certain, probable, questionable, none. Positive reactions to FM I occurred in 6.5% of the patients. Positive reactions to FM II were dose-dependent and increased from 1.3% (2.8% FM II), through 2.9% (14% FM II) to 4.1% (28% FM II). Reactions classified as doubtful or irritant varied considerably between the 6 centres, with a mean value of 7.2% for FM I and means ranging from 1.8% to 10.6% for FM II. 8.7% of the tested patients had a certain fragrance history. Of these, 25.2% were positive to FM I; reactivity to FM II was again dose-dependent and ranged from 8.1% to 17.6% in this subgroup. Comparing 2 groups of history - certain and none - values for sensitivity and specificity were calculated: sensitivity: FM I, 25.2%; 2.8% FM II, 8.1%; 14% FM II, 13.5%; 28% FM II, 17.6%; specificity: FM I, 96.5%; 2.8% FM II, 99.5%; 14% FM II, 98.8%; 28% FM II, 98.1%. 31/70 patients (44.3%) positive to 28% FM II were negative to FM I, with 14% FM II this proportion being 16/50 (32%). In the group of patients with a certain history, a total of 7 patients were found reacting to FM II only. Conversely, in the group of patients without any fragrance history, there were significantly more positive reactions to FM I than to any concentration of FM II. In conclusion, the new FM II detects additional patients sensitive to fragrances missed

  6. Influence of compost addition on lead and arsenic bioavailability in reclaimed orchard soil assessed using Porcellio scaber bioaccumulation test

    PubMed Central

    Udovic, M.; McBride, M.B.

    2015-01-01

    A long history of lead arsenate application in orchards has led to significant accumulation of Pb and As in the topsoil. Besides the threat that such soils represent for the environment, reclamation of old orchards for agricultural purposes implies the exposure of humans to Pb and As. In this study we assessed the influence of vegetable compost addition (as a sustainable agricultural practice) to contaminated acidic orchard soil on Pb and As bioavailability, assessed with two selective non-exhaustive chemical extractions and with an in vivo bioaccumulation test with an isopod (P. scaber). The treatment with compost caused a significant increase in soil pH and total carbon content, resulting in a consistent decrease of Pb bioavailability. In contrast, the bioavailability of As increased, indicating that a complementary treatment should be used for reducing the bioavailability of As in old orchard soils. This is the first report on the use of As accumulation in P. scaber as a tool for the assessment of As bioavailability in contaminated orchard soil. PMID:22240057

  7. Improvements for Differential Functioning of Items and Tests (DFIT): Investigating the Addition of Reporting an Effect Size Measure and Power

    ERIC Educational Resources Information Center

    Wright, Keith D.

    2011-01-01

    Standardized testing has been part of the American educational system for decades. Controversy from the beginning has plagued standardized testing, is plaguing testing today, and will continue to be controversial. Given the current federal educational policies supporting increased standardized testing, psychometricians, educators and policy makers…

  8. Chimpanzees Show a Developmental Increase in Susceptibility to Contagious Yawning: A Test of the Effect of Ontogeny and Emotional Closeness on Yawn Contagion

    PubMed Central

    Madsen, Elainie Alenkær; Persson, Tomas; Sayehli, Susan; Lenninger, Sara; Sonesson, Göran

    2013-01-01

    Contagious yawning has been reported for humans, dogs and several non-human primate species, and associated with empathy in humans and other primates. Still, the function, development and underlying mechanisms of contagious yawning remain unclear. Humans and dogs show a developmental increase in susceptibility to yawn contagion, with children showing an increase around the age of four, when also empathy-related behaviours and accurate identification of others’ emotions begin to clearly evince. Explicit tests of yawn contagion in non-human apes have only involved adult individuals and examined the existence of conspecific yawn contagion. Here we report the first study of heterospecific contagious yawning in primates, and the ontogeny of susceptibility thereto in chimpanzees, Pan troglodytes verus. We examined whether emotional closeness, defined as attachment history with the yawning model, affected the strength of contagion, and compared the contagiousness of yawning to nose-wiping. Thirty-three orphaned chimpanzees observed an unfamiliar and familiar human (their surrogate human mother) yawn, gape and nose-wipe. Yawning, but not nose-wiping, was contagious for juvenile chimpanzees, while infants were immune to contagion. Like humans and dogs, chimpanzees are subject to a developmental trend in susceptibility to contagious yawning, and respond to heterospecific yawn stimuli. Emotional closeness with the model did not affect contagion. The familiarity-biased social modulatory effect on yawn contagion previously found among some adult primates, seem to only emerge later in development, or be limited to interactions with conspecifics. The influence of the ‘chameleon effect’, targeted vs. generalised empathy, perspective-taking and visual attention on contagious yawning is discussed. PMID:24146848

  9. Chimpanzees show a developmental increase in susceptibility to contagious yawning: a test of the effect of ontogeny and emotional closeness on yawn contagion.

    PubMed

    Madsen, Elainie Alenkær; Persson, Tomas; Sayehli, Susan; Lenninger, Sara; Sonesson, Göran

    2013-01-01

    Contagious yawning has been reported for humans, dogs and several non-human primate species, and associated with empathy in humans and other primates. Still, the function, development and underlying mechanisms of contagious yawning remain unclear. Humans and dogs show a developmental increase in susceptibility to yawn contagion, with children showing an increase around the age of four, when also empathy-related behaviours and accurate identification of others' emotions begin to clearly evince. Explicit tests of yawn contagion in non-human apes have only involved adult individuals and examined the existence of conspecific yawn contagion. Here we report the first study of heterospecific contagious yawning in primates, and the ontogeny of susceptibility thereto in chimpanzees, Pan troglodytes verus. We examined whether emotional closeness, defined as attachment history with the yawning model, affected the strength of contagion, and compared the contagiousness of yawning to nose-wiping. Thirty-three orphaned chimpanzees observed an unfamiliar and familiar human (their surrogate human mother) yawn, gape and nose-wipe. Yawning, but not nose-wiping, was contagious for juvenile chimpanzees, while infants were immune to contagion. Like humans and dogs, chimpanzees are subject to a developmental trend in susceptibility to contagious yawning, and respond to heterospecific yawn stimuli. Emotional closeness with the model did not affect contagion. The familiarity-biased social modulatory effect on yawn contagion previously found among some adult primates, seem to only emerge later in development, or be limited to interactions with conspecifics. The influence of the 'chameleon effect', targeted vs. generalised empathy, perspective-taking and visual attention on contagious yawning is discussed. PMID:24146848

  10. Chimpanzees show a developmental increase in susceptibility to contagious yawning: a test of the effect of ontogeny and emotional closeness on yawn contagion.

    PubMed

    Madsen, Elainie Alenkær; Persson, Tomas; Sayehli, Susan; Lenninger, Sara; Sonesson, Göran

    2013-01-01

    Contagious yawning has been reported for humans, dogs and several non-human primate species, and associated with empathy in humans and other primates. Still, the function, development and underlying mechanisms of contagious yawning remain unclear. Humans and dogs show a developmental increase in susceptibility to yawn contagion, with children showing an increase around the age of four, when also empathy-related behaviours and accurate identification of others' emotions begin to clearly evince. Explicit tests of yawn contagion in non-human apes have only involved adult individuals and examined the existence of conspecific yawn contagion. Here we report the first study of heterospecific contagious yawning in primates, and the ontogeny of susceptibility thereto in chimpanzees, Pan troglodytes verus. We examined whether emotional closeness, defined as attachment history with the yawning model, affected the strength of contagion, and compared the contagiousness of yawning to nose-wiping. Thirty-three orphaned chimpanzees observed an unfamiliar and familiar human (their surrogate human mother) yawn, gape and nose-wipe. Yawning, but not nose-wiping, was contagious for juvenile chimpanzees, while infants were immune to contagion. Like humans and dogs, chimpanzees are subject to a developmental trend in susceptibility to contagious yawning, and respond to heterospecific yawn stimuli. Emotional closeness with the model did not affect contagion. The familiarity-biased social modulatory effect on yawn contagion previously found among some adult primates, seem to only emerge later in development, or be limited to interactions with conspecifics. The influence of the 'chameleon effect', targeted vs. generalised empathy, perspective-taking and visual attention on contagious yawning is discussed.

  11. Clicking-Machine Operator (boot & show; leather prod.) 6-62.055--Technical Report on Standardization of the General Aptitude Test Battery.

    ERIC Educational Resources Information Center

    Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

    The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

  12. Specificity dependence between serological tests for diagnosing bovine brucellosis in Brucella-free farms showing false positive serological reactions due to Yersinia enterocolitica O:9

    PubMed Central

    2005-01-01

    Abstract When brucellosis false positive serological reactions happen in cattle, the serial use of pairs of specificity-correlated serological tests (rose bengal, complement fixation, competitive ELISA) results in specificities lower than expected. In this situation, highly specific tests, such as the indirect ELISA used alone, may be more adequate than serial testing. PMID:16454384

  13. TESTING FOR ADDITIVITY IN THE LOW DOSE REGION OF AN ENVIRONMENTALLY RELEVANT MIXTURE OF 18 OLYHALOGENATED AROMATIC HYDROCARBONS.

    EPA Science Inventory

    A common default assumption in risk assessment of chemical mixtures is that the chemicals combine additively in the low dose region. Under additivity, with information from single chemical dose-response data, the risk associated with the mixture can be estimated. The objective ...

  14. MEG-measured auditory steady-state oscillations show high test-retest reliability: A sensor and source-space analysis.

    PubMed

    Tan, H-R M; Gross, J; Uhlhaas, P J

    2015-11-15

    Stability of oscillatory signatures across magnetoencephalography (MEG) measurements is an important prerequisite for basic and clinical research that has been insufficiently addressed. Here, we evaluated the test-retest reliability of auditory steady-state responses (ASSRs) over two MEG sessions. The study required participants (N=13) to detect the rare occurrence of pure tones interspersed within a stream of 5 Hz or 40 Hz amplitude-modulated (AM) tones. Intraclass correlations (ICC; Shrout and Fleiss, 1979) were derived to assess stability of spectral power changes and the inter-trial phase coherence (ITPC) of task-elicited neural responses. ASSRs source activity was estimated using eLORETA beamforming from bilateral auditory cortex. ASSRs to 40 Hz AM stimuli evoked stronger power modulation and phase-locking than 5 Hz stimulation. Overall, spectral power and ITPC values at both sensor- and source-level showed robust ICC values. Notably, ITPC measures yielded higher ICCs (~0.86-0.96) between sessions compared to the assessment of spectral power change (~0.61-0.82). Our data indicate that spectral modulations and phase consistency of ASSRs in MEG data are highly reproducible, providing support for MEG-measured oscillatory parameters in basic and clinical research.

  15. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Articles Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    It is important to realize that some test-articles may have significant sound absorption that may challenge the acoustic power capabilities of a test facility. Therefore, to mitigate this risk of not being able to meet the customers target spectrum, it is prudent to demonstrate early-on an increased acoustic power capability which compensates for this test-article absorption. This paper describes a concise method to reduce this risk when testing aerospace test-articles which have significant absorption. This method was successfully applied during the SpaceX Falcon 9 Payload Fairing acoustic test program at the NASA Glenn Research Center Plum Brook Stations RATF.

  16. Thermal Stability Testing of Fischer-Tropsch Fuel and Various Blends with Jet A, as Well as Aromatic Blend Additives

    NASA Technical Reports Server (NTRS)

    Klettlinger, J.; Rich, R.; Yen, C.; Surgenor, A.

    2011-01-01

    Fischer-Tropsch (F-T) jet fuel composition differs from petroleum-based, conventional commercial jet fuel because of differences in feedstock and production methodology. Fischer-Tropsch fuel typically has a lower aromatic and sulfur content and consists primarily of iso and normal parafins. The ASTM D3241 specification for Jet Fuel Thermal Oxidation Test (JFTOT) break point testing method was used to test the breakpoint of a baseline conventional Jet A, a commercial grade F-T jet fuel, and various blends of this F-T fuel in Jet A. The testing completed in this report was supported by the NASA Fundamental Aeronautics Subsonics Fixed Wing Project.

  17. Development of a technique for testing of tensile properties with miniature size specimens for metal additive manufacturing

    NASA Astrophysics Data System (ADS)

    Dongare, Sujitkumar

    The study of mechanical properties of metals provides a basis to decide on the capability of a particular metal for a task and also to make predictions about its life. The concepts of stress, strain and strength of materials are employed in practically every engineering discipline. Mechanical properties such as stiffness, yield strength, tensile strength, ductility, toughness, impact resistance, creep resistance, fatigue resistance and others, influence the design, fabrication and service life of equipment. Therefore, more than one property is considered for the material selection process for an application. For complete understanding of any material and its feasibility for a particular application, inter-related mechanical properties have to be measured. Unfortunately, these properties cannot be measured in any single test. However, the tensile test can be used to measure a number of the most commonly used mechanical properties. Extensive research has already been performed in this area. Standards have been developed and established regarding the size of test specimens, testing procedures and process parameters. This thesis discusses the development of a testing procedure for non-standard tensile tests for evaluation of material properties. Miniature test specimens similar to the standard ASTM E8 were designed and used for testing. The tests were mainly conducted on the baseline material for aerospace industry i.e. Ti-6Al-4V.

  18. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    The exposure of a customer's aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facility's available acoustic power capability becomes maximized with the test-article installed during the actual test then the customer's environment requirement may become compromised. In order to understand the risk of not achieving the customer's in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Station's Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

  19. An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption during Reverberant Chamber Acoustic Testing of Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Hozman, Aron D.; Hughes, William O.

    2014-01-01

    The exposure of a customers aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facilitys available acoustic power capability becomes maximized with the test-article installed during the actual test then the customers environment requirement may become compromised. In order to understand the risk of not achieving the customers in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Stations Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

  20. 46 CFR 160.151-29 - Additional approval tests for SOLAS A and SOLAS B inflatable liferafts.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of each type and size of stability appendage to be fitted to a liferaft must be tested as follows: (1.... The appendage and jig must be attached to a scale capable of recording peak readings, and...

  1. 46 CFR 160.151-29 - Additional approval tests for SOLAS A and SOLAS B inflatable liferafts.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Resolution A.689(17): (a) Test of filling time for stability appendages. A representative sample of each type... jig must be attached to a scale capable of recording peak readings, and suspended over a pool of...

  2. 46 CFR 160.151-29 - Additional approval tests for SOLAS A and SOLAS B inflatable liferafts.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... of each type and size of stability appendage to be fitted to a liferaft must be tested as follows: (1.... The appendage and jig must be attached to a scale capable of recording peak readings, and...

  3. 29 CFR Appendix B to Subpart I of... - General Testing Conditions and Additional Guidelines for Personal Fall Protection Systems (Non...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Positioning device systems—(a) Test Conditions. (1) The fixed anchorage should be rigid and should not have a..., nor exceed 1,000 pounds (4.45 Kn) for the remainder of the arrest time. (4) All other...

  4. Additional Human Papillomavirus Types Detected by the Hybrid Capture Tube Test among Samples from Women with Cytological and Colposcopical Atypia

    PubMed Central

    Kónya, József; Veress, György; Juhász, Attila; Szarka, Krisztina; Sápy, Tamás; Hernádi, Zoltán; Gergely, Lajos

    2000-01-01

    The type specificity of the human papillomavirus (HPV) Hybrid Capture Tube (HCT) test was evaluated by using typing with PCR (MY09-MY11)-restriction fragment length polymorphism (RFLP) and sequencing. All samples HCT test positive for only low-risk HPV (n = 15) or only high-risk HPV (n = 102) were confirmed, whereas 9 of 12 HCT test double-positive samples contained only high-risk HPV types as determined by PCR-RFLP. Several high-risk HPV types (HPV-53, -58, -62, -66, -CP8304, and -MM4) not included in the HCT test were indeed detected, indicating a broader detection range with retained distinction between low-risk and high-risk HPV types. PMID:10618127

  5. DETERMINING A ROBUST D-OPTIMAL DESIGN FOR TESTING FOR DEPARTURE FROM ADDITIVITY IN A MIXTURE OF FOUR PFAAS

    EPA Science Inventory

    Our objective was to determine an optimal experimental design for a mixture of perfluoroalkyl acids (PFAAs) that is robust to the assumption of additivity. Of particular focus to this research project is whether an environmentally relevant mixture of four PFAAs with long half-liv...

  6. Determining a Robust D-Optimal Design for Testing for Departure from Additivity in a Mixture of Four Perfluoroalkyl Acids.

    EPA Science Inventory

    Our objective is to determine an optimal experimental design for a mixture of perfluoroalkyl acids (PFAAs) that is robust to the assumption of additivity. PFAAs are widely used in consumer products and industrial applications. The presence and persistence of PFAAs, especially in ...

  7. 77 FR 29307 - Control of Alcohol and Drug Use: Addition of Post-Accident Toxicological Testing for Non...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-17

    ... substances under the Controlled Substances Act (CSA), Title II of the Comprehensive Drug Abuse Prevention... substances by safety- sensitive employees, may be too narrow to cover the use of prescription and OTC drugs... additional costs to employers would be minimal and indirect, such as the cost of responding to an......

  8. 78 FR 14217 - Control of Alcohol and Drug Use: Addition of Post-Accident Toxicological Testing for Non...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-05

    ... certain non-controlled substances with potentially impairing side effects (77 FR 29307). As discussed in..., chlorpheniramine, bromenphiramine, and doxylamine'' (77 FR at 29308, emphasis added). As explained below, the... suspicion and post-accident testing, 50 FR 31508, August 2, 1985), and the Supreme Court upheld...

  9. PGD for cystic fibrosis patients and couples at risk of an additional genetic disorder combined with 24-chromosome aneuploidy testing.

    PubMed

    Rechitsky, Svetlana; Verlinsky, Oleg; Kuliev, Anver

    2013-05-01

    Preimplantation genetic diagnosis (PGD) for inherited disorders is presently applied for more than 300 different conditions. The most frequent PGD indication is cystic fibrosis (CF), the largest series of which is reviewed here, totalling 404 PGD cycles. This involved testing for 52 different CFTR mutations with almost half of the cases (195/404 cycles) performed for ΔF508 mutation, one-quarter (103/404 cycles) for six other frequent mutations and only a few for the remaining 45 CFTR mutations. There were 44 PGD cycles performed for 25 CF-affected homozygous or double-heterozygous CF patients (18 male and seven female partners), which involved testing simultaneously for three mutations, resulting in birth of 13 healthy CF-free children and no misdiagnosis. PGD was also performed for six couples at a combined risk of producing offspring with CF and another genetic disorder. Concomitant testing for CFTR and other mutations resulted in birth of six healthy children, free of both CF and another genetic disorder in all but one cycle. A total of 96 PGD cycles for CF were performed with simultaneous aneuploidy testing, including microarray-based 24-chromosome analysis, as a comprehensive PGD for two or more conditions in the same biopsy material.

  10. Evaluation of a weighted test in the analysis of ordinal gait scores in an additivity model for five OP pesticides.

    EPA Science Inventory

    Appropriate statistical analyses are critical for evaluating interactions of mixtures with a common mode of action, as is often the case for cumulative risk assessments. Our objective is to develop analyses for use when a response variable is ordinal, and to test for interaction...

  11. Different sleep onset criteria at the multiple sleep latency test (MSLT): an additional marker to differentiate central nervous system (CNS) hypersomnias.

    PubMed

    Pizza, Fabio; Vandi, Stefano; Detto, Stefania; Poli, Francesca; Franceschini, Christian; Montagna, Pasquale; Plazzi, Giuseppe

    2011-03-01

    Excessive daytime sleepiness (EDS) has different correlates in non-rapid eye movement (NREM) [idiopathic hypersomnia (IH) without long sleep time] and REM sleep [narcolepsy without cataplexy (NwoC) and narcolepsy with cataplexy (NC)]-related hypersomnias of central origin. We analysed sleep onset characteristics at the multiple sleep latency test (MSLT) applying simultaneously two sleep onset criteria in 44 NC, seven NwoC and 16 IH consecutive patients referred for subjective EDS complaint. Sleep latency (SL) at MSLT was assessed both as the time elapsed to the occurrence of a single epoch of sleep Stage 1 NREM (SL) and of unequivocal sleep [three sleep Stage 1 NREM epochs or any other sleep stage epoch, sustained SL (SusSL)]. Idiopathic hypersomnia patients showed significantly (P<0.0001) longer SusSL than SL (7.7±2.5 versus 5.6±1.3 min, respectively) compared to NwoC (5.8±2.5 versus 5.3±2.2 min) and NC patients (4.1±3 versus 3.9±3 min). A mean difference threshold between SusSL and SL ≥27 s reached a diagnostic value to discriminate IH versus NC and NwoC sufferers (sensitivity 88%; specificity 82%). Moreover, NC patients showed better subjective sleepiness perception than NwoC and IH cases in the comparison between naps with or without sleep occurrence. Simultaneous application of the two widely used sleep onset criteria differentiates IH further from NC and NwoC patients: IH fluctuate through a wake-Stage 1 NREM sleep state before the onset of sustained sleep, while NC and NwoC shift abruptly into a sustained sleep. The combination of SusSL and SL determination at MSLT should be tested as an additional objective differential criterion for EDS disorders.

  12. 29 CFR Appendix B to Subpart I of... - General Testing Conditions and Additional Guidelines for Personal Fall Protection Systems (Non...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... strength and force tests should be a rigid, metal cylindrical or torso-shaped object with a girth of 38... falling free for a distance of 6 feet (1.83 m). The weight should be a rigid object with a girth of 38... (113.4 kg) weight falling free for a distance of 4 feet (1.22 m). The weight should be a rigid...

  13. Additive effects of lithium and antidepressants in the forced swimming test: further evidence for involvement of the serotoninergic system.

    PubMed

    Nixon, M K; Hascoet, M; Bourin, M; Colombel, M C

    1994-06-01

    In the mouse forced swimming test (FST) pretreatment with a subactive dose of lithium (1 mEq/kg), given IP 45 min before the test, facilitated the antidepressant activity of iprindole, fluoxetine, and moclobemide (given IP 30 min before the test). These antidepressants (ADS) were not active alone in the FST in this study. Moreover, when subactive lithium was combined with a wide range of ADS, each given at subactive doses, those ADS with serotoninergic properties (e.g. imipramine, citalopram, paroxetine, fluoxetine, trazodone, mianserin, and moclobemide) significantly reduced immobility times. ADS acting primarily on noradrenaline (NA) or dopamine (DA) systems (desipramine, maprotiline, viloxazine, and bupropion) did not significantly decrease immobility when given in combination with lithium. This was also the case for RO 16 6491 [a reversible, B specific monoamine oxidase inhibitor (MAOI)], nialamide, and pargyline (both irreversible, mixed MAOIs). The anti-immobility effect of iprindole in combination with lithium suggests either a direct or indirect action on the serotonin (5HT) system by this ADS whose mechanism of action remains obscure. These results, using an animal behavioral model of depression and combining our present knowledge of the acute action of various ADS, support the hypothesis that the potentiation by lithium of ADS is via direct 5HT mechanisms, indirectly via a NA/5HT link, and/or by second messenger systems. Lithium may also facilitate the expression of antidepressant activity of ADS not active by themselves in the FST.

  14. Additional Value of CH4 Measurement in a Combined 13C/H2 Lactose Malabsorption Breath Test: A Retrospective Analysis

    PubMed Central

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-01-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H2) excretion after an oral dose of lactose. We use a combined 13C/H2 lactose breath test that measures breath 13CO2 as a measure of lactose digestion in addition to H2 and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 13C/H2 lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH4 in addition to H2 and 13CO2. Based on the 13C/H2 breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH4 further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H2-excretion were found to excrete CH4. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH4-concentrations has an added value to the 13C/H2 breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  15. Complex Parts, Complex Data: Why You Need to Understand What Radiation Single Event Testing Data Does and Doesn't Show and the Implications Thereof

    NASA Technical Reports Server (NTRS)

    LaBel, Kenneth A.; Berg, Melanie D.

    2015-01-01

    Electronic parts (integrated circuits) have grown in complexity such that determining all failure modes and risks from single particle event testing is impossible. In this presentation, the authors will present why this is so and provide some realism on what this means. Its all about understanding actual risks and not making assumptions.

  16. Complex Parts, Complex Data: Why You Need to Understand What Radiation Single Event Testing Data Does and Doesn't Show and the Implications Thereof

    NASA Technical Reports Server (NTRS)

    Label, Kenneth A.; Berg, Melanie D.

    2016-01-01

    Electronic parts (integrated circuits) have grown in complexity such that determining all failure modes and risks from single particle event testing is impossible. In this presentation, the authors will present why this is so and provide some realism on what this means. Its all about understanding actual risks and not making assumptions.

  17. Intelligence Tests with Higher G-Loadings Show Higher Correlations with Body Symmetry: Evidence for a General Fitness Factor Mediated by Developmental Stability

    ERIC Educational Resources Information Center

    Prokosch, M.D.; Yeo, R.A.; Miller, G.F.

    2005-01-01

    Just as body symmetry reveals developmental stability at the morphological level, general intelligence may reveal developmental stability at the level of brain development and cognitive functioning. These two forms of developmental stability may overlap by tapping into a ''general fitness factor.'' If so, then intellectual tests with higher…

  18. Unsaturated fatty acids show clear elicitation responses in a modified local lymph node assay with an elicitation phase, and test positive in the direct peptide reactivity assay.

    PubMed

    Yamashita, Kunihiko; Shinoda, Shinsuke; Hagiwara, Saori; Miyazaki, Hiroshi; Itagaki, Hiroshi

    2015-12-01

    The Organisation for Economic Co-operation and Development (OECD) Test Guidelines (TG) adopted the murine local lymph node assay (LLNA) and guinea pig maximization test (GPMT) as stand-alone skin sensitization test methods. However, unsaturated carbon-carbon double-bond and/or lipid acids afforded false-positive results more frequently in the LLNA compared to those in the GPMT and/or in human subjects. In the current study, oleic, linoleic, linolenic, undecylenic, fumaric, maleic, and succinic acid and squalene were tested in a modified LLNA with an elicitation phase (LLNA:DAE), and in a direct peptide reactivity assay (DPRA) to evaluate their skin-sensitizing potential. Oleic, linoleic, linolenic, undecylenic and maleic acid were positive in the LLNA:DAE, of which three, linoleic, linolenic, and maleic acid were positive in the DPRA. Furthermore, the results of the cross-sensitizing tests using four LLNA:DAE-positive chemicals were negative, indicating a chemical-specific elicitation response. In a previous report, the estimated concentration needed to produce a stimulation index of 3 (EC3) of linolenic acid, squalene, and maleic acid in the LLNA was < 10%. Therefore, these chemicals were classified as moderate skin sensitizers in the LLNA. However, the skin-sensitizing potential of all LLNA:DAE-positive chemicals was estimated as weak. These results suggested that oleic, linoleic, linolenic, undecylenic, and maleic acid had skin-sensitizing potential, and that the LLNA overestimated the skin-sensitizing potential compared to that estimated by the LLNA:DAE.

  19. Unsaturated fatty acids show clear elicitation responses in a modified local lymph node assay with an elicitation phase, and test positive in the direct peptide reactivity assay.

    PubMed

    Yamashita, Kunihiko; Shinoda, Shinsuke; Hagiwara, Saori; Miyazaki, Hiroshi; Itagaki, Hiroshi

    2015-12-01

    The Organisation for Economic Co-operation and Development (OECD) Test Guidelines (TG) adopted the murine local lymph node assay (LLNA) and guinea pig maximization test (GPMT) as stand-alone skin sensitization test methods. However, unsaturated carbon-carbon double-bond and/or lipid acids afforded false-positive results more frequently in the LLNA compared to those in the GPMT and/or in human subjects. In the current study, oleic, linoleic, linolenic, undecylenic, fumaric, maleic, and succinic acid and squalene were tested in a modified LLNA with an elicitation phase (LLNA:DAE), and in a direct peptide reactivity assay (DPRA) to evaluate their skin-sensitizing potential. Oleic, linoleic, linolenic, undecylenic and maleic acid were positive in the LLNA:DAE, of which three, linoleic, linolenic, and maleic acid were positive in the DPRA. Furthermore, the results of the cross-sensitizing tests using four LLNA:DAE-positive chemicals were negative, indicating a chemical-specific elicitation response. In a previous report, the estimated concentration needed to produce a stimulation index of 3 (EC3) of linolenic acid, squalene, and maleic acid in the LLNA was < 10%. Therefore, these chemicals were classified as moderate skin sensitizers in the LLNA. However, the skin-sensitizing potential of all LLNA:DAE-positive chemicals was estimated as weak. These results suggested that oleic, linoleic, linolenic, undecylenic, and maleic acid had skin-sensitizing potential, and that the LLNA overestimated the skin-sensitizing potential compared to that estimated by the LLNA:DAE. PMID:26558466

  20. [Influence Additional Cognitive Tasks on EEG Beta Rhythm Parameters during Forming and Testing Set to Perception of the Facial Expression].

    PubMed

    Yakovenko, I A; Cheremushkin, E A; Kozlov, M K

    2015-01-01

    The research of changes of a beta rhythm parameters on condition of working memory loading by extension of a interstimuli interval between the target and triggering stimuli to 16 sec is investigated on 70 healthy adults in two series of experiments with set to a facial expression. In the second series at the middle of this interval for strengthening of the load was entered the additional cognitive task in the form of conditioning stimuli like Go/NoGo--circles of blue or green color. Data analysis of the research was carried out by means of continuous wavelet-transformation on the basis of "mather" complex Morlet-wavelet in the range of 1-35 Hz. Beta rhythm power was characterized by the mean level, maxima of wavelet-transformation coefficient (WLC) and latent periods of maxima. Introduction of additional cognitive task to pause between the target and triggering stimuli led to essential increase in absolute values of the mean level of beta rhythm WLC and relative sizes of maxima of beta rhythm WLC. In the series of experiments without conditioning stimulus subjects with large number of mistakes (from 6 to 40), i.e. rigid set, in comparison with subjects with small number of mistakes (to 5), i.e. plastic set, at the forming stage were characterized by higher values of the mean level of beta rhythm WLC. Introduction of the conditioning stimuli led to smoothing of intergroup distinctions throughout the experiment. PMID:26601500

  1. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  2. Serologic and PCR testing of persons with chronic fatigue syndrome in the United States shows no association with xenotropic or polytropic murine leukemia virus-related viruses.

    PubMed

    Satterfield, Brent C; Garcia, Rebecca A; Jia, Hongwei; Tang, Shaohua; Zheng, Haoqiang; Switzer, William M

    2011-02-22

    In 2009, a newly discovered human retrovirus, xenotropic murine leukemia virus (MuLV)-related virus (XMRV), was reported by Lombardi et al. in 67% of persons from the US with chronic fatigue syndrome (CFS) by PCR detection of gag sequences. Although six subsequent studies have been negative for XMRV, CFS was defined more broadly using only the CDC or Oxford criteria and samples from the US were limited in geographic diversity, both potentially reducing the chances of identifying XMRV positive CFS cases. A seventh study recently found polytropic MuLV sequences, but not XMRV, in a high proportion of persons with CFS. Here we tested blood specimens from 45 CFS cases and 42 persons without CFS from over 20 states in the United States for both XMRV and MuLV. The CFS patients all had a minimum of 6 months of post-exertional malaise and a high degree of disability, the same key symptoms described in the Lombardi et al. study. Using highly sensitive and generic DNA and RNA PCR tests, and a new Western blot assay employing purified whole XMRV as antigen, we found no evidence of XMRV or MuLV in all 45 CFS cases and in the 42 persons without CFS. Our findings, together with previous negative reports, do not suggest an association of XMRV or MuLV in the majority of CFS cases.

  3. Serologic and PCR testing of persons with chronic fatigue syndrome in the United States shows no association with xenotropic or polytropic murine leukemia virus-related viruses

    PubMed Central

    2011-01-01

    In 2009, a newly discovered human retrovirus, xenotropic murine leukemia virus (MuLV)-related virus (XMRV), was reported by Lombardi et al. in 67% of persons from the US with chronic fatigue syndrome (CFS) by PCR detection of gag sequences. Although six subsequent studies have been negative for XMRV, CFS was defined more broadly using only the CDC or Oxford criteria and samples from the US were limited in geographic diversity, both potentially reducing the chances of identifying XMRV positive CFS cases. A seventh study recently found polytropic MuLV sequences, but not XMRV, in a high proportion of persons with CFS. Here we tested blood specimens from 45 CFS cases and 42 persons without CFS from over 20 states in the United States for both XMRV and MuLV. The CFS patients all had a minimum of 6 months of post-exertional malaise and a high degree of disability, the same key symptoms described in the Lombardi et al. study. Using highly sensitive and generic DNA and RNA PCR tests, and a new Western blot assay employing purified whole XMRV as antigen, we found no evidence of XMRV or MuLV in all 45 CFS cases and in the 42 persons without CFS. Our findings, together with previous negative reports, do not suggest an association of XMRV or MuLV in the majority of CFS cases. PMID:21342521

  4. An Investigation of the Feasibility of Obtaining Additional Subscores on the GRE Advanced Psychology Test. GRE Board Professional Report GREB No. 74-4P.

    ERIC Educational Resources Information Center

    McPeek, Miles; And Others

    This study was undertaken to determine whether additional information useful for guidance or placement could be derived from the existing Graduate Record Examinations (GRE) Advanced Psychology Test. The number of subscores currently reported is limited by the high reliability required to make admissions decisions; subscores used only for guidance…

  5. The test and treatment methods of benign paroxysmal positional vertigo and an addition to the management of vertigo due to the superior vestibular canal (BPPV-SC).

    PubMed

    Rahko, T

    2002-10-01

    A review of the tests and treatment manoeuvres for benign paroxysmal positional vertigo of the posterior, horizontal and superior vestibular canals is presented. Additionally, a new way to test and treat positional vertigo of the superior vestibular canal is presented. In a prospective study, 57 out of 305 patients' visits are reported. They had residual symptoms and dizziness after the test and the treatment of benign paroxysmal positional vertigo of the horizontal canal (BPPV-HC) and posterior canal (PC). They were tested with a new test and treated with a new manoeuvre for superior canal benign paroxysmal positional vertigo (BPPV-SC). Results for vertigo in 53 patients were good; motion sickness and acrophobia disappeared. Reactive neck tension to BPPV was relieved. Older people were numerous among patients and their quality of life (QOL) improved.

  6. State Test Programs Mushroom as NCLB Mandate Kicks in: Nearly Half of States Are Expanding Their Testing Programs to Additional Grades This School Year to Comply with the Federal No Child Left Behind Act

    ERIC Educational Resources Information Center

    Olson, Lynn

    2005-01-01

    Twenty-three states are expanding their testing programs to additional grades this school year to comply with the federal No Child Left Behind Act. In devising the new tests, most states have defied predictions and chosen to go beyond multiple-choice items, by including questions that ask students to construct their own responses. But many state…

  7. An investigation of the effects of smoke suppressant fuel additives on engine and test cell exhaust gas opacities. Final report for 1981

    SciTech Connect

    Thornburg, D.W.; Darnell, T.R.; Netzer, D.W.

    1982-05-01

    Tests were conducted in a one-eighth scale turbojet test cell with a ramjet type combustor to investigate the effects of fuel additives on smoke reduction. Particle size and mass concentrations were determined at the engine and stack exhausts using three wavelength optical detector systems. Particulate samples were also collected at the engine exhaust and analyzed with a scanning electron microscope. Combustor temperature and fuel additives were found to significantly affect particulate mass concentrations emitted from the engine while particle size appeared to be unaffected. No significant changes in the particulate size or mass occurred from the engine exhaust to the stack exhaust. The optical determination of exhaust mean particulate size/mass concentration with three wavelength optical detector systems appears to be reasonably accurate technique for evaluating the effects of engine and test cell operating conditions and fuel composition changes on the emitted particulates.

  8. Male rats with same sex preference show high experimental anxiety and lack of anxiogenic-like effect of fluoxetine in the plus maze test.

    PubMed

    García-Cárdenas, Nallely; Olvera-Hernández, Sandra; Gómez-Quintanar, Blanca Nelly; Fernández-Guasti, Alonso

    2015-08-01

    Homosexual men show a 2-4 higher risk to suffer anxiety in comparison with heterosexuals. It is unknown if biological factors collaborate to increase such incidence. Fluoxetine produces differential brain activation in homosexuals as compared with heterosexuals, suggesting that it may produce a divergent behavioral effect dependant on sex-preference. The first aim was to evaluate experimental anxiety in male rats that show same-sex preference in the elevated plus maze (EPM). The second goal explored the putative differential effect of fluoxetine (10mg/kg) in male rats with female and same-sex preference in the EPM. To induce same-sex preference males were prenatally treated with letrozole (0.56μg/kg, 10-20 gestation days), while controls were males prenatally treated with letrozole that retain female-preference or which mothers received oil. In both groups we found animals with male preference, but the proportion was higher in males that prenatally received letrozole (10 vs. 27%). Males with same-sex preference spent less time and showed lower number of entries to the open arms of the EPM than males that prefer females, regardless of the prenatal treatment. In males with female preference, fluoxetine reduced the time spent and number of entries to the open arms that was absent in males with same-sex preference. These data suggest that biological factors contribute to the high levels of anxiety in subjects with same-sex preference and that fluoxetine in men may produce a divergent action depending on sexual orientation.

  9. Suitability of histopathology as an additional endpoint to the Isolated Chicken Eye Test for classification of non-extreme pH detergent and cleaning products.

    PubMed

    Cazelle, Elodie; Eskes, Chantra; Hermann, Martina; Jones, Penny; McNamee, Pauline; Prinsen, Menk; Taylor, Hannah; Wijnands, Marcel V W

    2014-06-01

    A.I.S.E. investigated the suitability of histopathological evaluations as an additional endpoint to the regulatory adopted ICE in vitro test method (OECD TG 438) to identify non-extreme pH detergent and cleaning products that require classification as EU CLP/UN GHS Category 1 (serious eye damage). To this aim, a total of 30 non-extreme pH products covering the range of in vivo classifications for eye irritation, and representing various product categories were tested. Epithelium vacuolation (mid and lower layers) and erosion (at least moderate) were found to be the most relevant histopathological effects induced by products classified in vivo as Category 1. Histopathology criteria specifically developed for non-extreme pH detergent and cleaning products were shown to correctly identify materials classified as Category 1 based on in vivo persistent effects, and to significantly increase the overall sensitivity of the standard ICE prediction model for Category 1 identification (to 75%) whilst maintaining a good concordance (73%). In contrast, use of EU CLP additivity approach for classification of mixtures was considerably less predictive, with a concordance of only 27%, and 100% over-predictions of non-Category 1 products. As such, use of histopathology as an addition to the ICE test method was found suitable to identify EU CLP/UN GHS Category 1 non-extreme pH detergent and cleaning products and to allow a better discrimination from Category 2 products.

  10. Heat treatment and the use of additives to improve the stability of paralytic shellfish poisoning toxins in shellfish tissue reference materials for internal quality control and proficiency testing.

    PubMed

    Burrell, Stephen; Clion, Valentin; Auroy, Virginie; Foley, Barry; Turner, Andrew D

    2015-06-01

    The need for homogenous reference materials stable for paralytic shellfish toxins is vital for the monitoring and quality assurance of these potent neurotoxins in shellfish. Two stabilisation techniques were investigated, heat treatment through autoclaving and the addition of preserving additives into the tissue matrix. Short and long-term stability experiments as well as homogeneity determination were conducted on materials prepared by both techniques in comparison with an untreated control using two LC-FLD methods. Both techniques improved the stability of the matrix and the PSP toxins present compared to the controls. A material was prepared using the combined techniques of heat treatment followed by spiking with additives and data is presented from this optimised reference material as used over a two year period in the Irish national monitoring program and in a development exercise as part of a proficiency testing scheme operated by QUASIMEME (Quality Assurance of Information for Marine Environmental Monitoring in Europe) since 2011. The results were indicative of the long-term stability of the material as evidenced through consistent assigned values in the case of the proficiency testing scheme and a low relative standard deviation of 10.5% for total toxicity data generated over 24 months.

  11. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  12. Additional value of thallium-201 SPECT to a conventional exercise test for the identification of severe coronary lesions after an episode of unstable coronary artery disease.

    PubMed

    Karlsson, J E; Björkholm, A; Nylander, E; Ohlsson, J; Wallentin, L

    1995-06-01

    The additional value of thallium-201 SPECT to a conventional exercise test for the identification of patients with severe coronary lesions was evaluated in 170 men, one month after an episode of unstable coronary artery disease. Severe coronary lesions at coronary angiography--defined as three vessel disease, left main stenosis or proximal left anterior descending artery stenosis as part of two vessel disease--were observed in 45.9%. In the SPECT image, the left ventricular myocardium was divided into nine segments and each segment was classified as either normal (= 0), reduced uptake (= 1) or uptake defect (= 2). The sum of gradings in all segments post-exercise was denoted "SPECT score". The patients were divided into nine different groups regarding ST-depression during exercise (no ST-depression, ST-depression in 1-2 leads or > or = 3 leads) and "SPECT score" (no SPECT score, 1-3 scores or > or = 4 scores). Severe coronary lesions were, in 68% identified by SPECT score > or = 4 and in 65% by ST-depression in > or = 1 lead at exercise test. The specificity for identification of severe coronary lesions was, for both tests, 65%. SPECT score > or = 4 and/or ST-depression in > or = 3 leads identified 82% of the patients with severe coronary lesions with a specificity of 63%. Furthermore, SPECT score > or = 3 identified more patients with isolated proximal left anterior descending artery stenosis than ST-depression alone at exercise test.

  13. Predictive Value of Class III D Cytological Diagnosis (Munich II, Low and Moderate Dysplasia) and Additional High-risk HPV Testing.

    PubMed

    Ziemke, P

    2012-07-01

    The validity of cytological diagnostic procedures for the detection of pre- and early cervical cancer stages is limited due to biological conditions, the uncertainty of cell sampling, and the subjective nature of microscopic assessment. Particularly in class III D cases (Munich II) this can lead to a stigmatization of patients and uncertainty with regard to further clinical follow-up and therapy. Prior to carrying out additional investigations such as high-risk HPV testing or the examination of biomarkers, the positive predictive values of patients with a class III D cytological diagnosis need to be assessed in routine practice. To this end, all relevant data from patients from our practice classed as class III D (pap smears) between 2002 and 2008 (n = 1190; 38.2 % histological diagnosis = therapeutic endpoint) and their current HPV status were recorded. Cytology, histology, persistence, age and follow-up were recorded. The database was used for comparative statistical analysis. Overall, the positive predictive value of conventional pap smear for CIN 2+ was calculated to be 32.3 % (mean follow-up: 39.7 months). The following values were calculated for high-risk HPV testing: sensitivity 94.8 %, specificity 39 %, positive predictive value 42.8 %, negative predictive value 94 %. The additional information obtained from high-risk HPV testing resulted in a significantly better positive predictive value only in patients older than 40 years. However, there was no evidence for an individual risk stratification approach which would reduce uncertainty in the management of III D patients.

  14. Television Quiz Show Simulation

    ERIC Educational Resources Information Center

    Hill, Jonnie Lynn

    2007-01-01

    This article explores the simulation of four television quiz shows for students in China studying English as a foreign language (EFL). It discusses the adaptation and implementation of television quiz shows and how the students reacted to them.

  15. The Great Cometary Show

    NASA Astrophysics Data System (ADS)

    2007-01-01

    its high spatial and spectral resolution, it was possible to zoom into the very heart of this very massive star. In this innermost region, the observations are dominated by the extremely dense stellar wind that totally obscures the underlying central star. The AMBER observations show that this dense stellar wind is not spherically symmetric, but exhibits a clearly elongated structure. Overall, the AMBER observations confirm that the extremely high mass loss of Eta Carinae's massive central star is non-spherical and much stronger along the poles than in the equatorial plane. This is in agreement with theoretical models that predict such an enhanced polar mass-loss in the case of rapidly rotating stars. ESO PR Photo 06c/07 ESO PR Photo 06c/07 RS Ophiuchi in Outburst Several papers from this special feature focus on the later stages in a star's life. One looks at the binary system Gamma 2 Velorum, which contains the closest example of a star known as a Wolf-Rayet. A single AMBER observation allowed the astronomers to separate the spectra of the two components, offering new insights in the modeling of Wolf-Rayet stars, but made it also possible to measure the separation between the two stars. This led to a new determination of the distance of the system, showing that previous estimates were incorrect. The observations also revealed information on the region where the winds from the two stars collide. The famous binary system RS Ophiuchi, an example of a recurrent nova, was observed just 5 days after it was discovered to be in outburst on 12 February 2006, an event that has been expected for 21 years. AMBER was able to detect the extension of the expanding nova emission. These observations show a complex geometry and kinematics, far from the simple interpretation of a spherical fireball in extension. AMBER has detected a high velocity jet probably perpendicular to the orbital plane of the binary system, and allowed a precise and careful study of the wind and the shockwave

  16. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  17. A Holographic Road Show.

    ERIC Educational Resources Information Center

    Kirkpatrick, Larry D.; Rugheimer, Mac

    1979-01-01

    Describes the viewing sessions and the holograms of a holographic road show. The traveling exhibits, believed to stimulate interest in physics, include a wide variety of holograms and demonstrate several physical principles. (GA)

  18. The Ozone Show.

    ERIC Educational Resources Information Center

    Mathieu, Aaron

    2000-01-01

    Uses a talk show activity for a final assessment tool for students to debate about the ozone hole. Students are assessed on five areas: (1) cooperative learning; (2) the written component; (3) content; (4) self-evaluation; and (5) peer evaluation. (SAH)

  19. Show What You Know

    ERIC Educational Resources Information Center

    Eccleston, Jeff

    2007-01-01

    Big things come in small packages. This saying came to the mind of the author after he created a simple math review activity for his fourth grade students. Though simple, it has proven to be extremely advantageous in reinforcing math concepts. He uses this activity, which he calls "Show What You Know," often. This activity provides the perfect…

  20. Showing What They Know

    ERIC Educational Resources Information Center

    Cech, Scott J.

    2008-01-01

    Having students show their skills in three dimensions, known as performance-based assessment, dates back at least to Socrates. Individual schools such as Barrington High School--located just outside of Providence--have been requiring students to actively demonstrate their knowledge for years. The Rhode Island's high school graduating class became…

  1. Stage a Water Show

    ERIC Educational Resources Information Center

    Frasier, Debra

    2008-01-01

    In the author's book titled "The Incredible Water Show," the characters from "Miss Alaineus: A Vocabulary Disaster" used an ocean of information to stage an inventive performance about the water cycle. In this article, the author relates how she turned the story into hands-on science teaching for real-life fifth-grade students. The author also…

  2. What Do Maps Show?

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    This curriculum packet, appropriate for grades 4-8, features a teaching poster which shows different types of maps (different views of Salt Lake City, Utah), as well as three reproducible maps and reproducible activity sheets which complement the maps. The poster provides teacher background, including step-by-step lesson plans for four geography…

  3. Obesity in show cats.

    PubMed

    Corbee, R J

    2014-12-01

    Obesity is an important disease with a high prevalence in cats. Because obesity is related to several other diseases, it is important to identify the population at risk. Several risk factors for obesity have been described in the literature. A higher incidence of obesity in certain cat breeds has been suggested. The aim of this study was to determine whether obesity occurs more often in certain breeds. The second aim was to relate the increased prevalence of obesity in certain breeds to the official standards of that breed. To this end, 268 cats of 22 different breeds investigated by determining their body condition score (BCS) on a nine-point scale by inspection and palpation, at two different cat shows. Overall, 45.5% of the show cats had a BCS > 5, and 4.5% of the show cats had a BCS > 7. There were significant differences between breeds, which could be related to the breed standards. Most overweight and obese cats were in the neutered group. It warrants firm discussions with breeders and cat show judges to come to different interpretations of the standards in order to prevent overweight conditions in certain breeds from being the standard of beauty. Neutering predisposes for obesity and requires early nutritional intervention to prevent obese conditions. PMID:24612018

  4. Show Me the Way

    ERIC Educational Resources Information Center

    Dicks, Matthew J.

    2005-01-01

    Because today's students have grown up steeped in video games and the Internet, most of them expect feedback, and usually gratification, very soon after they expend effort on a task. Teachers can get quick feedback to students by showing them videotapes of their learning performances. The author, a 3rd grade teacher describes how the seemingly…

  5. The Art Show

    ERIC Educational Resources Information Center

    Scolarici, Alicia

    2004-01-01

    This article describes what once was thought to be impossible--a formal art show extravaganza at an elementary school with 1,000 students, a Department of Defense Dependent School (DODDS) located overseas, on RAF Lakenheath, England. The dream of this this event involved the transformation of the school cafeteria into an elegant art show…

  6. Honored Teacher Shows Commitment.

    ERIC Educational Resources Information Center

    Ratte, Kathy

    1987-01-01

    Part of the acceptance speech of the 1985 National Council for the Social Studies Teacher of the Year, this article describes the censorship experience of this honored social studies teacher. The incident involved the showing of a videotape version of the feature film entitled "The Seduction of Joe Tynan." (JDH)

  7. Liofilchem® Chromatic VRE and vancomycin MIC Test Strip detected glycopeptide resistance in a vanB neonatal Enterococcus faecium isolate showing alternate vancomycin susceptibility and resistance with bioMérieux Vitek2

    PubMed Central

    Savini, Vincenzo; Marrollo, Roberta; Coclite, Eleonora; Fusilli, Paola; D’Incecco, Carmine; Fazii, Paolo; Gherardi, Giovanni

    2014-01-01

    A 1-month old neonate urine sample yielded vanB Enterococcus faecium; nevertheless, the isolate alternatively showed susceptibility and resistance to vancomycin with bioMérieux Vitek2 (cards AST592, AST632, AST586), while glycopeptide resistance was detected by Liofilchem® vancomycin MIC Test Strip and disc along with the Chromatic VRE chromogenic medium. This communication emphasizes that, as vanB gene may be heterogeneously expressed within a given Enterococcus population, glycopeptide resistance may be missed when using automated systems for antibiotic susceptibility testing. We suggest therefore that vancomycin in vitro activity be studied on all clinical isolates through agar methods, including use of chromogenic media. PMID:25337280

  8. Taking in a Show.

    PubMed

    Boden, Timothy W

    2016-01-01

    Many medical practices have cut back on education and staff development expenses, especially those costs associated with conventions and conferences. But there are hard-to-value returns on your investment in these live events--beyond the obvious benefits of acquired knowledge and skills. Major vendors still exhibit their services and wares at many events, and the exhibit hall is a treasure-house of information and resources for the savvy physician or administrator. Make and stick to a purposeful plan to exploit the trade show. You can compare products, gain new insights and ideas, and even negotiate better deals with representatives anxious to realize returns on their exhibition investments. PMID:27249887

  9. Taking in a Show.

    PubMed

    Boden, Timothy W

    2016-01-01

    Many medical practices have cut back on education and staff development expenses, especially those costs associated with conventions and conferences. But there are hard-to-value returns on your investment in these live events--beyond the obvious benefits of acquired knowledge and skills. Major vendors still exhibit their services and wares at many events, and the exhibit hall is a treasure-house of information and resources for the savvy physician or administrator. Make and stick to a purposeful plan to exploit the trade show. You can compare products, gain new insights and ideas, and even negotiate better deals with representatives anxious to realize returns on their exhibition investments.

  10. Obesity in show dogs.

    PubMed

    Corbee, R J

    2013-10-01

    Obesity is an important disease with a growing incidence. Because obesity is related to several other diseases, and decreases life span, it is important to identify the population at risk. Several risk factors for obesity have been described in the literature. A higher incidence of obesity in certain breeds is often suggested. The aim of this study was to determine whether obesity occurs more often in certain breeds. The second aim was to relate the increased prevalence of obesity in certain breeds to the official standards of that breed. To this end, we investigated 1379 dogs of 128 different breeds by determining their body condition score (BCS). Overall, 18.6% of the show dogs had a BCS >5, and 1.1% of the show dogs had a BCS>7. There were significant differences between breeds, which could be correlated to the breed standards. It warrants firm discussions with breeders and judges in order to come to different interpretations of the standards to prevent overweight conditions from being the standard of beauty. PMID:22882163

  11. Let the show begin

    SciTech Connect

    Alperowicz, N.

    1993-01-27

    Major changes should occur in the European polyolefins industry this year. BASF's (Ludwigshafen) polypropylene (PP) deal with ICI is expected to be followed by that of Hoechst (Frankfurt) and Petrofina (Brussels). The two are engaged in feasibility studies for a possible joint venture in PP and are expected to make a decision in the second quarter of this year. Shell and Himont are on track to complete their feasibility study in the first quarter for a polyolefins joint venture. And Huels and PCD are still in talks. But two new possible deals, a polyolefins merger between Nests (Helsinki) and Statoil (Stavanger) and an alliance in PP involving Appryl, the Elf Atochem (51%)/BP Chemicals (49%) joint venture, and Solvay have been denied. The Hoechst/Fina venture would initially encompass only the two companies European plants - Hoechst's 550,000-m.t./year and Fina's 180,000 m.t./year. In addition, Fina would either build or acquire another PP plant. In the second stage, the partners could bring in their overseas plants. Fina has plants in the US, and Hoechst has a combined 100,000 m.t./year in south Africa and Australia. Neste's board member Jukka Viinanen says the only talks between Nests and Statoil center on renegotiations of ethylene supply contract at Stenungsund, Sweden. Nests wants a more flexible deal on quantity and price. It needs 400,000 m.t./year of ethylene for its downstream plants. Viinanen adds that he is worried about the European petrochemical industry and producers need to do everything to improve margins through pricing policies and obtaining a balance between supply and demand. On the possibility of a future link with Statoil he comments, One can never say never. It would take time. We don't feel in a very vulnerable position right now.

  12. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show. PMID:23631336

  13. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show.

  14. Delayed uric Acid accumulation in plasma provides additional anti-oxidant protection against iron-triggered oxidative stress after a wingate test.

    PubMed

    Souza-Junior, Tp; Lorenço-Lima, L; Ganini, D; Vardaris, Cv; Polotow, Tg; Barros, Mp

    2014-12-01

    Reactive oxygen species are produced during anaerobic exercise mostly by Fe ions released into plasma and endothelial/muscle xanthine oxidase activation that generates uric acid (UA) as the endpoint metabolite. Paradoxically, UA is considered a major antioxidant by virtue of being able to chelate pro-oxidative iron ions. This work aimed to evaluate the relationship between UA and plasma markers of oxidative stress following the exhaustive Wingate test. Plasma samples of 17 male undergraduate students were collected before, 5 and 60 min after maximal anaerobic effort for the measurement of total iron, haem iron, UA, ferric-reducing antioxidant activity in plasma (FRAP), and malondialdehyde (MDA, biomarker of lipoperoxidation). Iron and FRAP showed similar kinetics in plasma, demonstrating an adequate pro-/antioxidant balance immediately after exercise and during the recovery period (5-60 min). Slight variations of haem iron concentrations did not support a relevant contribution of rhabdomyolysis or haemolysis for iron overload following exercise. UA concentration did not vary immediately after exercise but rather increased 29% during the recovery period. Unaltered MDA levels were concomitantly measured. We propose that delayed UA accumulation in plasma is an auxiliary antioxidant response to post-exercise (iron-mediated) oxidative stress, and the high correlation between total UA and FRAP in plasma (R-Square = 0.636; p = 0.00582) supports this hypothesis. PMID:25435669

  15. DELAYED URIC ACID ACCUMULATION IN PLASMA PROVIDES ADDITIONAL ANTI-OXIDANT PROTECTION AGAINST IRON-TRIGGERED OXIDATIVE STRESS AFTER A WINGATE TEST

    PubMed Central

    Souza-Junior, TP; Lorenço-Lima, L; Ganini, D; Vardaris, CV; Polotow, TG

    2014-01-01

    Reactive oxygen species are produced during anaerobic exercise mostly by Fe ions released into plasma and endothelial/muscle xanthine oxidase activation that generates uric acid (UA) as the endpoint metabolite. Paradoxically, UA is considered a major antioxidant by virtue of being able to chelate pro-oxidative iron ions. This work aimed to evaluate the relationship between UA and plasma markers of oxidative stress following the exhaustive Wingate test. Plasma samples of 17 male undergraduate students were collected before, 5 and 60 min after maximal anaerobic effort for the measurement of total iron, haem iron, UA, ferric-reducing antioxidant activity in plasma (FRAP), and malondialdehyde (MDA, biomarker of lipoperoxidation). Iron and FRAP showed similar kinetics in plasma, demonstrating an adequate pro-/antioxidant balance immediately after exercise and during the recovery period (5–60 min). Slight variations of haem iron concentrations did not support a relevant contribution of rhabdomyolysis or haemolysis for iron overload following exercise. UA concentration did not vary immediately after exercise but rather increased 29% during the recovery period. Unaltered MDA levels were concomitantly measured. We propose that delayed UA accumulation in plasma is an auxiliary antioxidant response to post-exercise (iron-mediated) oxidative stress, and the high correlation between total UA and FRAP in plasma (R-Square = 0.636; p = 0.00582) supports this hypothesis. PMID:25435669

  16. Public medical shows.

    PubMed

    Walusinski, Olivier

    2014-01-01

    In the second half of the 19th century, Jean-Martin Charcot (1825-1893) became famous for the quality of his teaching and his innovative neurological discoveries, bringing many French and foreign students to Paris. A hunger for recognition, together with progressive and anticlerical ideals, led Charcot to invite writers, journalists, and politicians to his lessons, during which he presented the results of his work on hysteria. These events became public performances, for which physicians and patients were transformed into actors. Major newspapers ran accounts of these consultations, more like theatrical shows in some respects. The resultant enthusiasm prompted other physicians in Paris and throughout France to try and imitate them. We will compare the form and substance of Charcot's lessons with those given by Jules-Bernard Luys (1828-1897), Victor Dumontpallier (1826-1899), Ambroise-Auguste Liébault (1823-1904), Hippolyte Bernheim (1840-1919), Joseph Grasset (1849-1918), and Albert Pitres (1848-1928). We will also note their impact on contemporary cinema and theatre. PMID:25273491

  17. Photographic copy of photograph, aerial view looking north and showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of photograph, aerial view looking north and showing Test Stand 'A' (at bottom), Test Stand 'B' (upper right), and a portion of Test Stand 'C' (top of view). Compare HAER CA-163-1 and 2 and note addition of liquid nitrogen storage tank (Building 4262/E-63) to west of Test Stand 'C' as well as various ancillary facilities located behind earth barriers near Test Stand 'C.' (JPL negative no. 384-3006-A, 12 December 1961) - Jet Propulsion Laboratory Edwards Facility, Edwards Air Force Base, Boron, Kern County, CA

  18. Stretched View Showing 'Victoria'

    NASA Technical Reports Server (NTRS)

    2006-01-01

    [figure removed for brevity, see original site] Stretched View Showing 'Victoria'

    This pair of images from the panoramic camera on NASA's Mars Exploration Rover Opportunity served as initial confirmation that the two-year-old rover is within sight of 'Victoria Crater,' which it has been approaching for more than a year. Engineers on the rover team were unsure whether Opportunity would make it as far as Victoria, but scientists hoped for the chance to study such a large crater with their roving geologist. Victoria Crater is 800 meters (nearly half a mile) in diameter, about six times wider than 'Endurance Crater,' where Opportunity spent several months in 2004 examining rock layers affected by ancient water.

    When scientists using orbital data calculated that they should be able to detect Victoria's rim in rover images, they scrutinized frames taken in the direction of the crater by the panoramic camera. To positively characterize the subtle horizon profile of the crater and some of the features leading up to it, researchers created a vertically-stretched image (top) from a mosaic of regular frames from the panoramic camera (bottom), taken on Opportunity's 804th Martian day (April 29, 2006).

    The stretched image makes mild nearby dunes look like more threatening peaks, but that is only a result of the exaggerated vertical dimension. This vertical stretch technique was first applied to Viking Lander 2 panoramas by Philip Stooke, of the University of Western Ontario, Canada, to help locate the lander with respect to orbiter images. Vertically stretching the image allows features to be more readily identified by the Mars Exploration Rover science team.

    The bright white dot near the horizon to the right of center (barely visible without labeling or zoom-in) is thought to be a light-toned outcrop on the far wall of the crater, suggesting that the rover can see over the low rim of Victoria. In figure 1, the northeast and southeast rims are labeled

  19. Emerging stool-based and blood-based non-invasive DNA tests for colorectal cancer screening: the importance of cancer prevention in addition to cancer detection.

    PubMed

    Pickhardt, Perry J

    2016-08-01

    Colorectal cancer (CRC) screening can be undertaken utilizing a variety of distinct approaches, which provides both opportunities and confusion. Traditionally, there has often been a trade-off between the degree of invasiveness of a screening test and its ability to prevent cancer, with fecal occult blood testing (FOBT) and optical colonoscopy (OC) at each end of the spectrum. CT colonography (CTC), although currently underutilized for CRC screening, represents an exception since it is only minimally invasive, yet provides accurate evaluation for advanced adenomas. More recently, the FDA approved a multi-target stool DNA test (Cologuard) and a blood-based test (Epi proColon) for average-risk CRC screening. This commentary will provide an overview of these two new non-invasive tests, including the clinical indications, mechanism of action, and diagnostic performance. Relevance to radiology practice, including a comparison with CTC, will also be discussed. PMID:27259335

  20. National Orange Show Photovoltaic Demonstration

    SciTech Connect

    Dan Jimenez Sheri Raborn, CPA; Tom Baker

    2008-03-31

    National Orange Show Photovoltaic Demonstration created a 400KW Photovoltaic self-generation plant at the National Orange Show Events Center (NOS). The NOS owns a 120-acre state fairground where it operates an events center and produces an annual citrus fair known as the Orange Show. The NOS governing board wanted to employ cost-saving programs for annual energy expenses. It is hoped the Photovoltaic program will result in overall savings for the NOS, help reduce the State's energy demands as relating to electrical power consumption, improve quality of life within the affected grid area as well as increase the energy efficiency of buildings at our venue. In addition, the potential to reduce operational expenses would have a tremendous effect on the ability of the NOS to service its community.

  1. K Basin Sludge Conditioning Process Testing Fate of PCBs During K Basin Sludge Dissolution in Nitric Acid and with Hydrogen Peroxide Addition

    SciTech Connect

    GM Mong; AJ Schmidt; EW Hoppe; KH Pool; KL Silvers; BM Thornton

    1999-01-04

    The work described in this report is part of the studies being performed to address the fate of polychlorinated biphenyls (PCBs) in K Basin sludge before the sludge can be transferred to the Tank Waste Remediation System (TWRS) double shell tanks. One set of tests examined the effect of hydrogen peroxide on the disposition of PCBs in a simulated K Basin dissolver solution containing 0.5 M nitric acid/1 M Fe(NO{sub 3}){sub 3}. A second series of tests examined the disposition of PCBs in a much stronger ({approx}10 M) nitric acid solution, similar to that likely to be encountered in the dissolution of the sludge.

  2. Wear testing under high load conditionsThe effect of ``anti-scuff'' additions to AISI 3135, 52100 and 9310 steels introduced by ion implantation and ion beam mixing

    NASA Astrophysics Data System (ADS)

    Hartley, N. E. W.; Hirvonen, J. K.

    1983-05-01

    There is a need to eliminate the sudden onset of severe adhesive wear ("scuffing") in high performance hardened steels (e.g. AISI 9310) under arduous load conditions. We have investigated the friction and wear behavior of three ion implanted and ion beam mixed steels under simulated scuffing conditions using a Falex friction and wear tester. This machine enabled tests to be carried out at a load of 700 lb (318 kg), corresponding to a mean contact pressure of approximately 20 000 psi (i.e., 1×10 8 N/m 2) which was sufficient to induce scuffing. A series of lower load tests at 200 lb (91 kg) load (5.2 × 10 7 N/m 2) enabled the longer term wear performance of various ion/substrate combinations to be measured. The frictional force experienced during wear testing was used to assess the degree of scuffing, and the amount of material worn away was measured on the Falex tester or by subsequent weight loss determinations, depending on the type of test. The following ions were implanted: C +, N +, P +, Ti +, Cr +, Mo +, and Ta +, chosen in order to evaluate the effects of intermetallic additions (C, N, P), alloys elements (Ti, Cr), and anti-scuff elements (Mo, Ta). In addition some thin ( ˜1000 Å) vacuum evaporated layers of Si, V, Ni, Nb, Sn, Mo, Ta and W were prepared, and in some cases intermixed with N + ions at a fluence of typically 2×10 17/cm 2, to compare with the effects of ion implantation. Under the low load conditions the wear rate of AISI 3135 steel (1.5% Ni, 0.65% Cr alloy tool steel) was found to be reduced by a factor 3 as a result of N + implantation under low load, in agreement with previous work reported elsewhere, whereas other ions gave inconclusive results. The 52100 steel (a through-hardened martensitic bearing steel) showed marked improvements after Ti + implantation, revealing a sensitivity to fluence which correlated with known dry sliding behaviour of this steel modified by titanium implantations. Ta + and Mo + implantations into 9310 steel (a

  3. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  4. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  5. View of building 11050 looking northeast, showing metal sided and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 looking northeast, showing metal sided and roofed addition on east elevation. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Fire Station & Marine Barracks, D Street, at corner of 4th Street, China Lake, Kern County, CA

  6. Human NR5A1/SF-1 Mutations Show Decreased Activity on BDNF (Brain-Derived Neurotrophic Factor), an Important Regulator of Energy Balance: Testing Impact of Novel SF-1 Mutations Beyond Steroidogenesis

    PubMed Central

    Malikova, Jana; Camats, Núria; Fernández-Cancio, Mónica; Heath, Karen; González, Isabel; Caimarí, María; del Campo, Miguel; Albisu, Marian; Kolouskova, Stanislava; Audí, Laura; Flück, Christa E.

    2014-01-01

    Context Human NR5A1/SF-1 mutations cause 46,XY disorder of sex development (DSD) with broad phenotypic variability, and rarely cause adrenal insufficiency although SF-1 is an important transcription factor for many genes involved in steroidogenesis. In addition, the Sf-1 knockout mouse develops obesity with age. Obesity might be mediated through Sf-1 regulating activity of brain-derived neurotrophic factor (BDNF), an important regulator of energy balance in the ventromedial hypothalamus. Objective To characterize novel SF-1 gene variants in 4 families, clinical, genetic and functional studies were performed with respect to steroidogenesis and energy balance. Patients 5 patients with 46,XY DSD were found to harbor NR5A1/SF-1 mutations including 2 novel variations. One patient harboring a novel mutation also suffered from adrenal insufficiency. Methods SF-1 mutations were studied in cell systems (HEK293, JEG3) for impact on transcription of genes involved in steroidogenesis (CYP11A1, CYP17A1, HSD3B2) and in energy balance (BDNF). BDNF regulation by SF-1 was studied by promoter assays (JEG3). Results Two novel NR5A1/SF-1 mutations (Glu7Stop, His408Profs*159) were confirmed. Glu7Stop is the 4th reported SF-1 mutation causing DSD and adrenal insufficiency. In vitro studies revealed that transcription of the BDNF gene is regulated by SF-1, and that mutant SF-1 decreased BDNF promoter activation (similar to steroid enzyme promoters). However, clinical data from 16 subjects carrying SF-1 mutations showed normal birth weight and BMI. Conclusions Glu7Stop and His408Profs*159 are novel SF-1 mutations identified in patients with 46,XY DSD and adrenal insufficiency (Glu7Stop). In vitro, SF-1 mutations affect not only steroidogenesis but also transcription of BDNF which is involved in energy balance. However, in contrast to mice, consequences on weight were not found in humans with SF-1 mutations. PMID:25122490

  7. Test/QA plan for the verification testing of alternative or reformulated liquid fuels, fuel additives, fuel emulsions, and lubricants for highway and nonroad use heavy-duty diesel engines

    EPA Science Inventory

    This Environmental Technology Verification Program test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR P...

  8. Testing the Effects of the Addition of Videos to a Website Promoting Environmental Breast Cancer Risk Reduction Practices: Are Videos Worth It?

    PubMed Central

    Perrault, Evan K.; Silk, Kami J.

    2013-01-01

    Searching for ways to reach wider audiences in more comprehensible ways, health promotion agencies might add videos to their current web offerings. While potentially costly and time consuming to create, the effect of these videos on websites has not received much attention. This study translated research about the potential breast cancer risk for young girls associated with the household chemical PFOA into two websites mothers with young daughters were randomly assigned to view (website with videos vs. website without videos). Results revealed participants in the video condition found the advocated risk protective behaviors easier to perform and stated they were more likely to perform them than those in the non-video condition. Approximately 15 days after exposure, those in the video condition performed on average one more protective behavior than those in the non-video condition. Results also suggest that agencies’ efforts should focus on creating one quality video to place on a homepage, as video views declined the deeper people navigated into the site. Behaviors advocated should also be ones that can have lasting impacts with one-time actions, as effects wore away over time. Additional strategies are discussed for health promoters seeking to create videos to add to their current websites. PMID:25143661

  9. TESTING FOR DEPARTURES FROM ADDITIVITY FOR A 2:1 MIXTURE OF CHLORPYRIFOS AND CARBARYL ON CHOLINESTERASE ACTIVITY IN BRAIN, PLASMA, AND RED BLOOD CELLS OF LONG EVANS RATS.

    EPA Science Inventory

    Detecting and characterizing interactions among chemicals is an important environmental issue. This study was conducted to test for the existence of a significant departure from additivity for a mixture of two cholinesterase (ChE)-inhibiting pesticides: chlorpyrifos (CPF), an org...

  10. Pea Plants Show Risk Sensitivity.

    PubMed

    Dener, Efrat; Kacelnik, Alex; Shemesh, Hagai

    2016-07-11

    Sensitivity to variability in resources has been documented in humans, primates, birds, and social insects, but the fit between empirical results and the predictions of risk sensitivity theory (RST), which aims to explain this sensitivity in adaptive terms, is weak [1]. RST predicts that agents should switch between risk proneness and risk aversion depending on state and circumstances, especially according to the richness of the least variable option [2]. Unrealistic assumptions about agents' information processing mechanisms and poor knowledge of the extent to which variability imposes specific selection in nature are strong candidates to explain the gap between theory and data. RST's rationale also applies to plants, where it has not hitherto been tested. Given the differences between animals' and plants' information processing mechanisms, such tests should help unravel the conflicts between theory and data. Measuring root growth allocation by split-root pea plants, we show that they favor variability when mean nutrient levels are low and the opposite when they are high, supporting the most widespread RST prediction. However, the combination of non-linear effects of nitrogen availability at local and systemic levels may explain some of these effects as a consequence of mechanisms not necessarily evolved to cope with variance [3, 4]. This resembles animal examples in which properties of perception and learning cause risk sensitivity even though they are not risk adaptations [5]. PMID:27374342

  11. Computer modelling integrated with micro-CT and material testing provides additional insight to evaluate bone treatments: Application to a beta-glycan derived whey protein mice model.

    PubMed

    Sreenivasan, D; Tu, P T; Dickinson, M; Watson, M; Blais, A; Das, R; Cornish, J; Fernandez, J

    2016-01-01

    The primary aim of this study was to evaluate the influence of a whey protein diet on computationally predicted mechanical strength of murine bones in both trabecular and cortical regions of the femur. There was no significant influence on mechanical strength in cortical bone observed with increasing whey protein treatment, consistent with cortical tissue mineral density (TMD) and bone volume changes observed. Trabecular bone showed a significant decline in strength with increasing whey protein treatment when nanoindentation derived Young׳s moduli were used in the model. When microindentation, micro-CT phantom density or normalised Young׳s moduli were included in the model a non-significant decline in strength was exhibited. These results for trabecular bone were consistent with both trabecular bone mineral density (BMD) and micro-CT indices obtained independently. The secondary aim of this study was to characterise the influence of different sources of Young׳s moduli on computational prediction. This study aimed to quantify the predicted mechanical strength in 3D from these sources and evaluate if trends and conclusions remained consistent. For cortical bone, predicted mechanical strength behaviour was consistent across all sources of Young׳s moduli. There was no difference in treatment trend observed when Young׳s moduli were normalised. In contrast, trabecular strength due to whey protein treatment significantly reduced when material properties from nanoindentation were introduced. Other material property sources were not significant but emphasised the strength trend over normalised material properties. This shows strength at the trabecular level was attributed to both changes in bone architecture and material properties.

  12. Does having a drink help you think? 6-7-Year-old children show improvements in cognitive performance from baseline to test after having a drink of water.

    PubMed

    Edmonds, Caroline J; Jeffes, Ben

    2009-12-01

    Little research has examined the effect of water consumption on cognition in children. We examined whether drinking water improves performance from baseline to test in twenty-three 6-7-year-old children. There were significant interactions between time of test and water group (water/no water), with improvements in the water group on thirst and happiness ratings, visual attention and visual search, but not visual memory or visuomotor performance. These results indicate that even under conditions of mild dehydration, not as a result of exercise, intentional water deprivation or heat exposure, children's cognitive performance can be improved by having a drink of water.

  13. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  14. Plan Showing Cross Bracing Under Upper Stringers, Typical Section Showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan Showing Cross Bracing Under Upper Stringers, Typical Section Showing End Framing, Plan Showing Cross Bracing Under Lower Stringers, End Elevation - Covered Bridge, Spanning Contoocook River, Hopkinton, Merrimack County, NH

  15. Good Show by Today's Students

    ERIC Educational Resources Information Center

    Lowry, W. Kenneth

    1977-01-01

    Investigates whether today's students would score as well as students of the 1930-1950 era on achievement tests. Uses the Progressive Achievement Test, a test widely used in the 1930-1950 era as a barometer of student ability. (RK)

  16. 14 CFR 27.927 - Additional tests.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... attainable torque output of the engines, assuming that torque limiting devices, if any, function properly. (2... conditions, assuming that torque limiting devices, if any, function properly. Each transmission input must be... that the rotor drive mechanism is safe, must be performed. (b) If turbine engine torque output to...

  17. 14 CFR 27.927 - Additional tests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... attainable torque output of the engines, assuming that torque limiting devices, if any, function properly. (2... conditions, assuming that torque limiting devices, if any, function properly. Each transmission input must be... that the rotor drive mechanism is safe, must be performed. (b) If turbine engine torque output to...

  18. Is Your (Ethical) Slippage Showing?

    ERIC Educational Resources Information Center

    Rein, Lowell G.

    1980-01-01

    Analyzes the causes of ethical slippage which damages creditability and invites increased governmental regulation. Suggests 15 concrete steps that can be taken to rectify the situation. Includes an ethics test. (JOW)

  19. 8. Detail showing concrete abutment, showing substructure of bridge, specifically ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Detail showing concrete abutment, showing substructure of bridge, specifically west side of arch and substructure. - Presumpscot Falls Bridge, Spanning Presumptscot River at Allen Avenue extension, 0.75 mile west of U.S. Interstate 95, Falmouth, Cumberland County, ME

  20. 28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS LINCOLN BOULEVARD, BIG LOST RIVER, AND NAVAL REACTORS FACILITY. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-101-2. DATED OCTOBER 12, 1965. INEL INDEX CODE NUMBER: 075 0101 851 151969. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

  1. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  2. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  3. Comparison of the performance of microtube column systems and solid-phase systems and the tube low-ionic-strength solution additive indirect antiglobulin test in the detection of red cell alloantibodies.

    PubMed

    Weisbach, V; Kohnhäuser, T; Zimmermann, R; Ringwald, J; Strasser, E; Zingsem, J; Eckstein, R

    2006-08-01

    To compare the performance of seven currently available test systems in the detection of erythrocyte alloantibodies (ab), we tested in parallel 446 sera samples containing red cell ab [368 sera samples with ab that are assumed to be clinically significant (cs-ab) and 78 sera samples with ab that are assumed to be of minor clinical significance (ms-ab)] using the tube spin low-ionic-strength solution (addition method) indirect antiglobulin test (tube LISS-IAT), three microtube column agglutination techniques (DiaMed-ID, Ortho BioVue and Bio-Rad Scangel), one affinity adherence test system (CLB/Mast CellBind Screen) and two solid-phase tests [Biotest Solidscreen II and Immucor Capture-R Ready-Screen (4)]. To address the specificity of the three test systems under routine conditions, results of 4566 patient samples obtained using the tube LISS-IAT, results of 5205 patient samples obtained using the Scangel and results of 3560 samples obtained using the Capture-R were evaluated. The DiaMed-ID detected 344 cs-ab and 43 ms-ab, BioVue 333 cs-ab and 48 ms-ab, Scangel 348 cs-ab and 62 ms-ab, CellBind Screen 346 cs-ab and 47 ms-ab, Solidscreen 330 cs-ab and 38 ms-ab, Capture-R 358 cs-ab and 45 ms-ab and LISS-IAT 159 cs-ab and 12 ms-ab. In routine practice, erythrocyte cs-ab could be identified in 61 (67.8%) of 90 reactive sera (specificity: 98.6%) in the tube LISS-IAT, in 169 (58.7%) of 288 (94.4%) in Bio-Rad Scangel and in 101 (51.0%) of 198 reactive sera (94.3%) in Capture-R. We conclude that the sensitivity of the microcolumn, affinity adherence and solid-phase test systems in the detection of cs-ab was similar and was markedly superior to that of the conventional tube LISS-IAT. All high-sensitive test systems produced higher rates of false positives and ms-ab compared to the tube test. An individual cost-benefit analysis, considering the recent knowledge about the clinical significance of weak-reactive cs-ab, should be performed in every institution to decide whether and

  4. Anomaly Detection In Additively Manufactured Parts Using Laser Doppler Vibrometery

    SciTech Connect

    Hernandez, Carlos A.

    2015-09-29

    Additively manufactured parts are susceptible to non-uniform structure caused by the unique manufacturing process. This can lead to structural weakness or catastrophic failure. Using laser Doppler vibrometry and frequency response analysis, non-contact detection of anomalies in additively manufactured parts may be possible. Preliminary tests show promise for small scale detection, but more future work is necessary.

  5. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  6. Satellite Movie Shows Erika Dissipate

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite from Aug. 27 to 29 shows Tropical Storm Erika move through the Eastern Caribbean Sea and dissipate near eastern Cuba. ...

  7. Lubricant and additive effects on spur gear fatigue life

    NASA Technical Reports Server (NTRS)

    Townsend, D. P.; Zaretsky, E. V.; Scibbe, H. W.

    1985-01-01

    Spur gear endurance tests were conducted with six lubricants using a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 spur gears. The sixth lubricant was divided into four batches each of which had a different additive content. Lubricants tested with a phosphorus-type load carrying additive showed a statistically significant improvement in life over lubricants without this type of additive. The presence of sulfur type antiwear additives in the lubricant did not appear to affect the surface fatigue life of the gears. No statistical difference in life was produced with those lubricants of different base stocks but with similar viscosity, pressure-viscosity coefficients and antiwear additives. Gears tested with a 0.1 wt % sulfur and 0.1 wt % phosphorus EP additives in the lubricant had reactive films that were 200 to 400 (0.8 to 1.6 microns) thick.

  8. Lubricant and additive effects on spur gear fatigue life

    NASA Technical Reports Server (NTRS)

    Townsend, D. P.; Zaretsky, E. V.; Scibbe, H. W.

    1986-01-01

    Spur gear endurance tests were conducted with six lubricants using a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 spur gears. The sixth lubricants was divided into four batches each of which had a different additive content. Lubricant tested with a phosphorus-type load carrying additive showed a statistically significant improvement in life over lubricants without this type of additive. The presence of sulfur type antiwear additives in the lubricant did not appear to affect the surface fatigue life of the gears. No statistical difference in life was produced with those lubricants of different base stocks but with similar viscosity, pressure-viscosity coefficients and antiwar additives. Gears tested with a 0.1 wt pct sulfur and 0.1 wt pct phosphorus EP additives in the lubricant had reactive films that were 200 to 400 (0.8 to 1.6 microns) thick.

  9. Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combination of ionic liquid and ZDDP as anti-wear additives

    SciTech Connect

    Barnhill, William C.; Gao, Hong; Kheireddin, Bassem; Papke, Brian L.; Luo, Huimin; West, Brian H.; Qu, Jun

    2015-09-29

    We have previously reported an oil-miscible phosphonium-organophosphate ionic liquid (IL) with an effective anti-wear (AW) functionality when added to a base oil by itself or combined with a conventional zinc dialkyldithiophosphate (ZDDP) for a synergistic effect. In this research, we investigated whether this synergy manifests in formulated engine oils. An experimental SAE 0W-16 engine oil was generated containing a combination of IL and ZDDP with equal phosphorus contribution. The prototype engine oil was first evaluated using tribological bench tests: AW performance in boundary lubrication (BL) and friction behavior (Stribeck curves) in elastohydrodynamic, mixed, and BL. In addition, the forthcoming standard Sequence VIE engine dynamometer test was then conducted to demonstrate improved fuel economy. Results were benchmarked against those of another experimental engine oil with almost the same formulation except using ZDDP only without the IL (similar total phosphorus content). The IL-ZDDP formulation consistently outperforms the ZDDP-only formulation in friction reduction and wear protection, and results from the bench and engine tests are well correlated.

  10. Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combination of ionic liquid and ZDDP as anti-wear additives

    DOE PAGES

    Barnhill, William C.; Gao, Hong; Kheireddin, Bassem; Papke, Brian L.; Luo, Huimin; West, Brian H.; Qu, Jun

    2015-09-29

    We have previously reported an oil-miscible phosphonium-organophosphate ionic liquid (IL) with an effective anti-wear (AW) functionality when added to a base oil by itself or combined with a conventional zinc dialkyldithiophosphate (ZDDP) for a synergistic effect. In this research, we investigated whether this synergy manifests in formulated engine oils. An experimental SAE 0W-16 engine oil was generated containing a combination of IL and ZDDP with equal phosphorus contribution. The prototype engine oil was first evaluated using tribological bench tests: AW performance in boundary lubrication (BL) and friction behavior (Stribeck curves) in elastohydrodynamic, mixed, and BL. In addition, the forthcoming standardmore » Sequence VIE engine dynamometer test was then conducted to demonstrate improved fuel economy. Results were benchmarked against those of another experimental engine oil with almost the same formulation except using ZDDP only without the IL (similar total phosphorus content). The IL-ZDDP formulation consistently outperforms the ZDDP-only formulation in friction reduction and wear protection, and results from the bench and engine tests are well correlated.« less

  11. Arches showing UV flaring activity

    NASA Technical Reports Server (NTRS)

    Fontenla, J. M.

    1988-01-01

    The UVSP data obtained in the previous maximum activity cycle show the frequent appearance of flaring events in the UV. In many cases these flaring events are characterized by at least two footpoints which show compact impulsive non-simultaneous brightenings and a fainter but clearly observed arch developes between the footpoints. These arches and footpoints are observed in line corresponding to different temperatures, as Lyman alpha, N V, and C IV, and when observed above the limb display large Doppler shifts at some stages. The size of the arches can be larger than 20 arcsec.

  12. Create a Polarized Light Show.

    ERIC Educational Resources Information Center

    Conrad, William H.

    1992-01-01

    Presents a lesson that introduces students to polarized light using a problem-solving approach. After illustrating the concept using a slinky and poster board with a vertical slot, students solve the problem of creating a polarized light show using Polya's problem-solving methods. (MDH)

  13. Pembrolizumab Shows Promise for NSCLC.

    PubMed

    2015-06-01

    Data from the KEYNOTE-001 trial show that pembrolizumab improves clinical outcomes for patients with advanced non-small cell lung cancer, and is well tolerated. PD-L1 expression in at least 50% of tumor cells correlated with improved efficacy.

  14. Printability of alloys for additive manufacturing.

    PubMed

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  15. Printability of alloys for additive manufacturing

    PubMed Central

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  16. Printability of alloys for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Zuback, J. S.; de, A.; Debroy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  17. Printability of alloys for additive manufacturing.

    PubMed

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  18. Printability of alloys for additive manufacturing

    DOE PAGES

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is usedmore » to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.« less

  19. Magic Carpet Shows Its Colors

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The upper left image in this display is from the panoramic camera on the Mars Exploration Rover Spirit, showing the 'Magic Carpet' region near the rover at Gusev Crater, Mars, on Sol 7, the seventh martian day of its journey (Jan. 10, 2004). The lower image, also from the panoramic camera, is a monochrome (single filter) image of a rock in the 'Magic Carpet' area. Note that colored portions of the rock correlate with extracted spectra shown in the plot to the side. Four different types of materials are shown: the rock itself, the soil in front of the rock, some brighter soil on top of the rock, and some dust that has collected in small recesses on the rock face ('spots'). Each color on the spectra matches a line on the graph, showing how the panoramic camera's different colored filters are used to broadly assess the varying mineral compositions of martian rocks and soils.

  20. Risk-based approach to developing a national residue sampling plan for testing under European Union regulation for veterinary medicinal products and coccidiostat feed additives in domestic animal production.

    PubMed

    Danaher, Martin; Shanahan, Conor; Butler, Francis; Evans, Rhodri; O'Sullivan, Dan; Glynn, Denise; Camon, Tim; Lawlor, Peadar; O'Keeffe, Michael

    2016-07-01

    A ranking system for veterinary medicinal products and coccidiostat feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the Irish National Residue Control Plan (NRCP). Three characteristics of substances that may occur as residues in food are included in the developed risk ranking system: Potency, as measured by the acceptable daily intake assigned by the European Medicines Agency Committee for Medicinal Products for Veterinary Use, to each substance; Usage, as measured by the three factors of Number of Doses, use on Individual animals or for Group treatment, and Withdrawal Period; and Residue Occurrence, as measured by the number of Non-Compliant Samples in the NRCP. For both Number of Doses and Non-Compliant Samples, data for the 5-year period 2008-12 have been used. The risk ranking system for substances was developed for beef cattle, sheep and goats, pigs, chickens and dairy cattle using a scoring system applied to the various parameters described above to give an overall score based on the following equation: Potency × Usage (Number of Doses + Individual/Group Use + Withdrawal Period) × Residue Occurrence. Applying this risk ranking system, the following substances are ranked very highly: antimicrobials such as amoxicillin (for all species except pigs), marbofloxacillin (for beef cattle), oxytetracycline (for all species except chickens), sulfadiazine with trimethoprim (for pigs and chickens) and tilmicosin (for chickens); antiparasitic drugs, such as the benzimidazoles triclabendazole (for beef and dairy cattle), fenbendazole/oxfendazole (for sheep/goats and dairy cattle) and albendazole (for dairy cattle), the avermectin ivermectin (for beef cattle), and anti-fluke drugs closantel and rafoxanide (for sheep/goats); the anticoccidials monensin, narasin, nicarbazin and toltrazuril (for chickens). The risk ranking system described is a relatively simple system

  1. Risk-based approach to developing a national residue sampling plan for testing under European Union regulation for veterinary medicinal products and coccidiostat feed additives in domestic animal production.

    PubMed

    Danaher, Martin; Shanahan, Conor; Butler, Francis; Evans, Rhodri; O'Sullivan, Dan; Glynn, Denise; Camon, Tim; Lawlor, Peadar; O'Keeffe, Michael

    2016-07-01

    A ranking system for veterinary medicinal products and coccidiostat feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the Irish National Residue Control Plan (NRCP). Three characteristics of substances that may occur as residues in food are included in the developed risk ranking system: Potency, as measured by the acceptable daily intake assigned by the European Medicines Agency Committee for Medicinal Products for Veterinary Use, to each substance; Usage, as measured by the three factors of Number of Doses, use on Individual animals or for Group treatment, and Withdrawal Period; and Residue Occurrence, as measured by the number of Non-Compliant Samples in the NRCP. For both Number of Doses and Non-Compliant Samples, data for the 5-year period 2008-12 have been used. The risk ranking system for substances was developed for beef cattle, sheep and goats, pigs, chickens and dairy cattle using a scoring system applied to the various parameters described above to give an overall score based on the following equation: Potency × Usage (Number of Doses + Individual/Group Use + Withdrawal Period) × Residue Occurrence. Applying this risk ranking system, the following substances are ranked very highly: antimicrobials such as amoxicillin (for all species except pigs), marbofloxacillin (for beef cattle), oxytetracycline (for all species except chickens), sulfadiazine with trimethoprim (for pigs and chickens) and tilmicosin (for chickens); antiparasitic drugs, such as the benzimidazoles triclabendazole (for beef and dairy cattle), fenbendazole/oxfendazole (for sheep/goats and dairy cattle) and albendazole (for dairy cattle), the avermectin ivermectin (for beef cattle), and anti-fluke drugs closantel and rafoxanide (for sheep/goats); the anticoccidials monensin, narasin, nicarbazin and toltrazuril (for chickens). The risk ranking system described is a relatively simple system

  2. Show Them You Really Want the Job

    ERIC Educational Resources Information Center

    Perlmutter, David D.

    2012-01-01

    Showing that one really "wants" the job entails more than just really wanting the job. An interview is part Broadway casting call, part intellectual dating game, part personality test, and part, well, job interview. When there are 300 applicants for a position, many of them will "fit" the required (and even the preferred) skills listed in the job…

  3. 5. Photographic copy of engineering drawing showing plans, elevation and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of engineering drawing showing plans, elevation and section of Deluge Water System, including reservior (4316), Pump House (4317), and water tower. Job No. Muroc A(5-ll), Military Construction, San Bernardino-Mojave Area, San Bernardino, California: Muroc Bombing Range, Muroc Lake, California.; Additional Facilities for Materiel Center Flight Test Base, Water Supply System, Plans and Sections, Sheet 5 of 10, May 1943. Records on file at AFFTC/CE-CECC-B (Design/Construction Flight/RPMC), Edwards AFB, California. - Edwards Air Force Base, North Base, Deluge Water Pumping Station, Near Second & D Streets, Boron, Kern County, CA

  4. ShowMe3D

    SciTech Connect

    Sinclair, Michael B

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from the displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.

  5. "Show me" bioethics and politics.

    PubMed

    Christopher, Myra J

    2007-10-01

    Missouri, the "Show Me State," has become the epicenter of several important national public policy debates, including abortion rights, the right to choose and refuse medical treatment, and, most recently, early stem cell research. In this environment, the Center for Practical Bioethics (formerly, Midwest Bioethics Center) emerged and grew. The Center's role in these "cultural wars" is not to advocate for a particular position but to provide well researched and objective information, perspective, and advocacy for the ethical justification of policy positions; and to serve as a neutral convener and provider of a public forum for discussion. In this article, the Center's work on early stem cell research is a case study through which to argue that not only the Center, but also the field of bioethics has a critical role in the politics of public health policy.

  6. ShowMe3D

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from themore » displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.« less

  7. Casimir experiments showing saturation effects

    SciTech Connect

    Sernelius, Bo E.

    2009-10-15

    We address several different Casimir experiments where theory and experiment disagree. First out is the classical Casimir force measurement between two metal half spaces; here both in the form of the torsion pendulum experiment by Lamoreaux and in the form of the Casimir pressure measurement between a gold sphere and a gold plate as performed by Decca et al.; theory predicts a large negative thermal correction, absent in the high precision experiments. The third experiment is the measurement of the Casimir force between a metal plate and a laser irradiated semiconductor membrane as performed by Chen et al.; the change in force with laser intensity is larger than predicted by theory. The fourth experiment is the measurement of the Casimir force between an atom and a wall in the form of the measurement by Obrecht et al. of the change in oscillation frequency of a {sup 87}Rb Bose-Einstein condensate trapped to a fused silica wall; the change is smaller than predicted by theory. We show that saturation effects can explain the discrepancies between theory and experiment observed in all these cases.

  8. Mimas Showing False Colors #1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    False color images of Saturn's moon, Mimas, reveal variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    The image at the left is a narrow angle clear-filter image, which was separately processed to enhance the contrast in brightness and sharpness of visible features. The image at the right is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined into a single black and white picture that isolates and maps regional color differences. This 'color map' was then superimposed over the clear-filter image at the left.

    The combination of color map and brightness image shows how the color differences across the Mimas surface materials are tied to geological features. Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of each image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in

  9. 42. HISTORIC VIEW LOOKING WEST SHOWING A REDSTONE ROCKET BEING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. HISTORIC VIEW LOOKING WEST SHOWING A REDSTONE ROCKET BEING WORKED ON IN THE TEST STAND PRIOR TO A TEST FIRING. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

  10. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  11. Amplitudes of Pain-Related Evoked Potentials Are Useful to Detect Small Fiber Involvement in Painful Mixed Fiber Neuropathies in Addition to Quantitative Sensory Testing – An Electrophysiological Study

    PubMed Central

    Hansen, Niels; Kahn, Ann-Kathrin; Zeller, Daniel; Katsarava, Zaza; Sommer, Claudia; Üçeyler, Nurcan

    2015-01-01

    To investigate the usefulness of pain-related evoked potentials (PREP) elicited by electrical stimulation for the identification of small fiber involvement in patients with mixed fiber neuropathy (MFN). Eleven MFN patients with clinical signs of large fiber impairment and neuropathic pain and ten healthy controls underwent clinical and electrophysiological evaluation. Small fiber function, electrical conductivity and morphology were examined by quantitative sensory testing (QST), PREP, and skin punch biopsy. MFN was diagnosed following clinical and electrophysiological examination (chronic inflammatory demyelinating neuropathy: n = 6; vasculitic neuropathy: n = 3; chronic axonal ­neuropathy: n = 2). The majority of patients with MFN characterized their pain by descriptors that mainly represent C-fiber-mediated pain. In QST, patients displayed elevated cold, warm, mechanical, and vibration detection thresholds and cold pain thresholds indicative of MFN. PREP amplitudes in patients correlated with cold (p < 0.05) and warm detection thresholds (p < 0.05). Burning pain and the presence of par-/dysesthesias correlated negatively with PREP amplitudes (p < 0.05). PREP amplitudes correlating with cold and warm detection thresholds, burning pain, and par-/dysesthesias support employing PREP amplitudes as an additional tool in conjunction with QST for detecting small fiber impairment in patients with MFN. PMID:26696950

  12. 75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) NORTH'S STORE (1900); BLACKSMITH SHOP (C. 1860, WITH ADDITIONS); AND DRYHOUSE (C. 1860, WITH ADDITIONS). C. 1905. - Quincy Mining Company, Hancock, Houghton County, MI

  13. Rationale, design and methods of the Study of Work and Pain (SWAP): a cluster randomised controlled trial testing the addition of a vocational advice service to best current primary care for patients with musculoskeletal pain (ISRCTN 52269669)

    PubMed Central

    2014-01-01

    Background Musculoskeletal pain is a major contributor to short and long term work absence. Patients seek care from their general practitioner (GP) and yet GPs often feel ill-equipped to deal with work issues. Providing a vocational case management service in primary care, to support patients with musculoskeletal problems to remain at or return to work, is one potential solution but requires robust evaluation to test clinical and cost-effectiveness. Methods/Design This protocol describes a cluster randomised controlled trial, with linked qualitative interviews, to investigate the effect of introducing a vocational advice service into general practice, to provide a structured approach to managing work related issues in primary care patients with musculoskeletal pain who are absent from work or struggling to remain in work. General practices (n = 6) will be randomised to offer best current care or best current care plus a vocational advice service. Adults of working age who are absent from or struggling to remain in work due to a musculoskeletal pain problem will be invited to participate and 330 participants will be recruited. Data collection will be through patient completed questionnaires at baseline, 4 and 12 months. The primary outcome is self-reported work absence at 4 months. Incremental cost-utility analysis will be undertaken to calculate the cost per additional QALY gained and incremental net benefits. A linked interview study will explore the experiences of the vocational advice service from the perspectives of GPs, nurse practitioners (NPs), patients and vocational advisors. Discussion This paper presents the rationale, design, and methods of the Study of Work And Pain (SWAP) trial. The results of this trial will provide evidence to inform primary care practice and guide the development of services to provide support for musculoskeletal pain patients with work-related issues. Trial registration Current Controlled Trials ISRCTN52269669. PMID:25012813

  14. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  15. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  16. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  17. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  18. 5. SUPERINTENDENT'S COTTAGE WEST WALL AND NORTH FRONT SHOWING CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. SUPERINTENDENT'S COTTAGE WEST WALL AND NORTH FRONT SHOWING CONCRETE BLOCK UTILITY ROOM ADDITION. - Tucson Plant Materials Center, Superintendent's Cottage, 3241 North Romero Road, Tucson, Pima County, AZ

  19. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  20. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  1. 11. DETAIL SHOWING ROLLING ENGINE DECK AND NORTHEAST TRUSS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. DETAIL SHOWING ROLLING ENGINE DECK AND NORTHEAST TRUSS OF SUPERSTRUCTURE. Looking northeast. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  2. 4. DETAIL SHOWING FLAME DEFLECTOR. Looking southeast. Edwards Air ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. DETAIL SHOWING FLAME DEFLECTOR. Looking southeast. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  3. View of first level from north showing interstitial structural columns ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of first level from north showing interstitial structural columns for the Shuttle assemble configuration. - Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

  4. 16. DETAIL SHOWING LIQUID OXYGEN TANK FOURTEENINCH BALL VALVE. Looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. DETAIL SHOWING LIQUID OXYGEN TANK FOURTEEN-INCH BALL VALVE. Looking southwest. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  5. Detail view of base of Building 70021, showing Building 70022 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of base of Building 70021, showing Building 70022 (background), facing southeast - Naval Ordnance Test Station Inyokern, Randsburg Wash Facility Target Test Towers, Tower Road, China Lake, Kern County, CA

  6. View showing base of Building 70021 with Building 70022 in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View showing base of Building 70021 with Building 70022 in background, facing southeast - Naval Ordnance Test Station Inyokern, Randsburg Wash Facility Target Test Towers, Tower Road, China Lake, Kern County, CA

  7. 14. DETAIL SHOWING HYDROGEN (LEFT) AND OXYGEN (RIGHT) PREVALVES. Looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. DETAIL SHOWING HYDROGEN (LEFT) AND OXYGEN (RIGHT) PREVALVES. Looking southeast. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  8. Septic tank additive impacts on microbial populations.

    PubMed

    Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

    2008-01-01

    Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

  9. Evaluation of fuel additives for reduction of material imcompatibilities in methanol-gasoline blends

    NASA Technical Reports Server (NTRS)

    Rodriguez, C. F.; Barbee, J. G.; Knutson, W. K.; Cuellar, J. P., Jr.

    1983-01-01

    Screening tests determined the efficacy of six commercially available additives as modifiers of methanol's corrosivity toward metals and its weakening of tensile properties of nonmetals in automotive fuel systems. From the screening phase, three additives which seemed to protect some of the metals were tested in higher concentrations and binary combinations in search of optimal application conditions. Results indicate that two of the additives have protective properties and combining them increases the protection of the metals corroded by methanol-gasoline blends. Half of the metals in the tests were not corroded. Testing at recommended concentrations and then at higher concentrations and in combinations shows that the additives would have no protective or harmful effects on the nonmetals. Two additives emerged as candidates for application to the protection of metals in automotive methanol-gasoline fuel systems. The additives tested were assigned letter codes to protect their proprietary nature.

  10. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  11. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  12. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  13. Lubricants and Additives Affect Spur-Gear Fatigue

    NASA Technical Reports Server (NTRS)

    Scibbe, H.; Townsend, D.; Aron, P.; Zaretsky, E.

    1986-01-01

    Surface-fatigue tests conducted with AISI 9310 steel spur gears show surface-fatigue life of AISI 9310 steel spur gears increased as much as 400 percent by addition of small amount of phosphorus-type extreme-pressure (EP) additive in lubricant. Antiwear or EP additives either absorbed onto surface or react with surface to form protective coating or surface film. Boundary film provides barrier that prevents contact of metal surfaces and provides low shear strength, which reduces friction coefficient below base metal.

  14. Improvement of GRCop-84 Through the Addition of Zirconium

    NASA Technical Reports Server (NTRS)

    Ellis, David L.; Lerch, Bradley A.

    2012-01-01

    GRCop-84 (Cu-8 at.% Cr-4 at.% Nb) has excellent strength, creep resistance, low cycle fatigue (LCF) life and stability at elevated temperatures. It suffers in comparison to many commercially available precipitation-strengthened alloys below 500 C (932 F). It was observed that the addition of Zr consistently improved the mechanical properties of Cu-based alloys especially below 500 C. In an effort to improve the low temperature properties of GRCop-84, 0.35 wt.% Zr was added to the alloy. Limited tensile, creep, and LCF testing was conducted to determine if improvements occur. The results showed some dramatic increases in the tensile and creep properties at the conditions tested with the probability of additional improvements being possible through cold working. LCF testing at room temperature did not show an improvement, but improvements might occur at elevated temperatures.

  15. Fluency with Basic Addition

    ERIC Educational Resources Information Center

    Garza-Kling, Gina

    2011-01-01

    Traditionally, learning basic facts has focused on rote memorization of isolated facts, typically through the use of flash cards, repeated drilling, and timed testing. However, as many experienced teachers have seen, "drill alone does not develop mastery of single-digit combinations." In contrast, a fluency approach to learning basic addition…

  16. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  17. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  18. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  19. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  20. Early hydration of portland cement with crystalline mineral additions

    SciTech Connect

    Rahhal, V. . E-mail: vrahhal@fio.unicen.edu.ar; Talero, R.

    2005-07-01

    This research presents the effects of finely divided crystalline mineral additions (quartz and limestone), commonly known as filler, on the early hydration of portland cements with very different mineralogical composition. The used techniques to study the early hydration of blended cements were conduction calorimeter, hydraulicity (Fratini's test), non-evaporable water and X-ray diffraction. Results showed that the stimulation and the dilution effects increase when the percentage of crystalline mineral additions used is increased. Depending on the replacement proportion, the mineralogical cement composition and the type of crystalline addition, at 2 days, the prevalence of the dilution effect or the stimulation effect shows that crystalline mineral additions could act as sites of heat dissipation or heat stimulation, respectively.

  1. 2. Photographic copy of engineering drawing showing mechanical systems in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Photographic copy of engineering drawing showing mechanical systems in plan and sections of Test Stand 'E,' including tunnel entrance. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Bldg. E-60 Mechanical, Solid Propellant Test Stand,' sheet E60/13-4, June 20, 1961. - Jet Propulsion Laboratory Edwards Facility, Test Stand E, Edwards Air Force Base, Boron, Kern County, CA

  2. 1. Photographic copy of engineering drawing showing elevations and sections ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing elevations and sections of Test Stand 'E' (Building 4259/E-60). California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Solid Propellant Test Stand E-60 - Elevations & Sections,' sheet E60/10, no date. - Jet Propulsion Laboratory Edwards Facility, Test Stand E, Edwards Air Force Base, Boron, Kern County, CA

  3. 10. DETAIL SHOWING THRUST MEASURING SYSTEM. Looking up from the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. DETAIL SHOWING THRUST MEASURING SYSTEM. Looking up from the test stand deck to east. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  4. 12. Historic view of Building 100 control room, showing television ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Historic view of Building 100 control room, showing television monitoring of tests and personnel operating rocket engine test controls. May 27, 1957. On file at NASA Plumbrook Research Facility, Sandusky, Ohio. NASA photo number C-45021. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  5. Topics in Microeconometrics: Estimation of a Dynamic Model of Occupational Transitions, Wage and Non-Wage Benefits Cross Validation Bandwidth Selection for Derivatives of Various Dimensional Densities Testing the Additive Separability of the Teacher Value Added Effect Semiparametrically

    ERIC Educational Resources Information Center

    Baird, Matthew David

    2012-01-01

    I study three separate questions in this dissertation. In Chapter 1, I develop and estimate a structural dynamic model of occupation and job choice to test hypotheses of the importance of wages and non-wages and learning in occupational transitions, and find that wages are approximately 3 times as important as non-wage benefits in decisions and…

  6. Salmon testes meal as a functional feed additive in fish meal and plant-protein based diets for rainbow trout(Oncorhynchus mykiss walbaum)and nile tilapia(Oreochromis niloticus L.) fry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We report that salmon testes meal (TM) produced from Alaskan seafood processing byproducts is a potential protein source for aquafeed formulations. A series of feeding trials was conducted using three different fish species; including Nile tilapia, rainbow trout, and white sturgeon at their early gr...

  7. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  8. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  9. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  10. Sarks as additional fermions

    NASA Astrophysics Data System (ADS)

    Agrawal, Jyoti; Frampton, Paul H.; Jack Ng, Y.; Nishino, Hitoshi; Yasuda, Osamu

    1991-03-01

    An extension of the standard model is proposed. The gauge group is SU(2) X ⊗ SU(3) C ⊗ SU(2) S ⊗ U(1) Q, where all gauge symmetries are unbroken. The colour and electric charge are combined with SU(2) S which becomes strongly coupled at approximately 500 GeV and binds preons to form fermionic and vector bound states. The usual quarks and leptons are singlets under SU(2) X but additional fermions, called sarks. transform under it and the electroweak group. The present model explains why no more than three light quark-lepton families can exist. Neutral sark baryons, called narks, are candidates for the cosmological dark matter having the characteristics designed for WIMPS. Further phenomenological implications of sarks are analyzed i including electron-positron annihilation. Z 0 decay, flavor-changing neutral currents. baryon-number non-conservation, sarkonium and the neutron electric dipole moment.

  11. Temperature Data Shows Warming in 2001

    NASA Technical Reports Server (NTRS)

    2002-01-01

    TThe figure above depicts how much air temperatures near the Earth's surface changed relative to the global mean temperature from 1951 to 1980. NASA researchers used maps of urban areas derived from city lights data to account for the 'heat island' effect of cities. The red and orange colors show that temperatures are warmer in most regions of the world when compared to the 1951 to 1980 'normal' temperatures. Warming around the world has been widespread, but it is not present everywhere. The largest warming is in Northern Canada, Alaska and Siberia, as indicated by the deeper red colors. The lower 48 United States have become warmer recently, but only enough to make the temperatures comparable to what they were in the 1930s. The scale on the bottom of these temperature anomaly images represent degrees in Celsius. The negative numbers represent cooling and the positive numbers depict warming. Overall, the air temperature near the Earth's surface has warmed by 1oF (0.6oC) globally, on average, over the last century. For more information and additional images, read Satellites Shed Light on a Warmer World. Image courtesy Goddard Institute for Space Studies (GISS).

  12. View looking north west showing the boom, top of the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View looking north west showing the boom, top of the center mast and boom angle reeving of the 175-ton derrick. Note in the background of the view, just above the center mast is the F-1 Static-Test Stand used for test firing the Saturn V engines and subsequent program's engine testing. Also in the background center is the Redstone Static Test Stand (center right) and it's cold calibration tower (center left). - Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

  13. Ionic Liquids as Novel Lubricants and /or Lubricant Additives

    SciTech Connect

    Qu, J.; Viola, M. B.

    2013-10-31

    This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction in mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.

  14. [Allergic contact dermatitis as a consequence of additional occupations].

    PubMed

    Paravina, M; Stanojević, M; Spalević, Lj; Jovanović, D

    1994-01-01

    During discovering etiology of allergic contact dermatitis (ACD) anamnesis is of great importance (date of life, profession of a patients, activities besides the profession, habits, hobbies). Many people have additional professions, habits, hobbies). Many people have additional professions, either as hobbies or as financial reasons. They can show senzibilization to substances they come to contact with. The aim of this work is to point to this possibility of generating ACD. Five petients suffering from ACD were presented. All of them were tested by standard series and by substances thej came to contact with, while going in for additional occupations. 1. A metalsmith, going in for beekeeping, had positive tests to propolis and balsam of Peru. 2. A construction worker growing fruit, hat positive tests to TMT and fingicid melpreks. 3. Stics weaver, engaging in constructions work, had positive tests to potassium bichromate. 4. Retired professor in matematics, engaged in constructions works, had positive tests to potassium bichromate, too. 5. A law student, going in for photography, had positive tests to colour film developer. The nature of allergens, length of exposure, possibilites for elimination of allergens, means of protection etc have been discussed. It was conslused that a detail examination of patients was necessary for proving causes of ACD.

  15. Moon Phase & Libration 2013: Additional Graphics

    NASA Video Gallery

    This visualization shows the phase and libration of the Moon throughout the year 2013, at hourly intervals. Each frame represents one hour. In addition, this version of the visualization shows addi...

  16. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  17. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  18. Show Horse Welfare: Horse Show Competitors' Understanding, Awareness, and Perceptions of Equine Welfare.

    PubMed

    Voigt, Melissa A; Hiney, Kristina; Richardson, Jennifer C; Waite, Karen; Borron, Abigail; Brady, Colleen M

    2016-01-01

    The purpose of this study was to gain a better understanding of stock-type horse show competitors' understanding of welfare and level of concern for stock-type show horses' welfare. Data were collected through an online questionnaire that included questions relating to (a) interest and general understanding of horse welfare, (b) welfare concerns of the horse show industry and specifically the stock-type horse show industry, (c) decision-making influences, and (d) level of empathic characteristics. The majority of respondents indicated they agree or strongly agree that physical metrics should be a factor when assessing horse welfare, while fewer agreed that behavioral and mental metrics should be a factor. Respondent empathy levels were moderate to high and were positively correlated with the belief that mental and behavioral metrics should be a factor in assessing horse welfare. Respondents indicated the inhumane practices that most often occur at stock-type shows include excessive jerking on reins, excessive spurring, and induced excessive unnatural movement. Additionally, respondents indicated association rules, hired trainers, and hired riding instructors are the most influential regarding the decisions they make related to their horses' care and treatment.

  19. NOAA OTEC CWP (National Oceanic and Atmospheric Administration Ocean Thermal Energy Conversion Cold Water Pipe) at-sea test. Volume 3: Additional tabulation of the power spectra, part 2

    NASA Astrophysics Data System (ADS)

    1983-12-01

    Data collected during the Ocean Thermal Energy Conversion (OTEC) Cold Water Pipe At Sea Test are analyzed. Also included are the following ittems: (1) sensor factors and offsets, and the data processing algorithms used to convert the recorded sensor measurements from electrical to engineering units; (2) plots of the power spectra estimates obtained from a fast fourier transform (FFT) analysis of selected channels; (3) plots of selected sensor measurements as a function of time; and (4) plots of bending strain along the pipe using statistics and values presented.

  20. 8. July 1973. VIEW OF WEST END OF WORKS, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. July 1973. VIEW OF WEST END OF WORKS, SHOWING LEFT-TO-RIGHT: ELEVATOR, GABLED END OF ORIGINAL BUILDING, TWO-STORY 1905 ADDITION, AND BLACKSMITH SHOP ADDITIONS. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  1. PLANAR VIEW OF REAR (NORTHWEST) SIDE OF GARAGE, SHOWING FLAMMABLES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PLANAR VIEW OF REAR (NORTHWEST) SIDE OF GARAGE, SHOWING FLAMMABLES LOCKER AND ADDITION ON RIGHT, VIEW TOWARDS SOUTHEAST - Moore Haven Lock, Garage, Cross-State Canal, Okeechobee Intracoastal Waterway, Moore Haven, Glades County, FL

  2. 33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLAN AND LOCATION OF PROPOSED ADDITIONS, METROPOLITAN WATER AND SEWERAGE BOARD, METROPOLITAN SEWERAGE WORKS, JULY 1908. Aperture card 6417. - Deer Island Pumping Station, Boston, Suffolk County, MA

  3. 3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING A GROUP OF HAGERSTOWN HIGH SCHOOL STUDENTS IN THE PROCESS OF UNCOVERING THE ADDITIONAL FOUNDATION - Jonathan Hager House (Foundation), Hagerstown, Washington County, MD

  4. Antenna cab interior showing waveguide from external parabolic antenna (later ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Antenna cab interior showing waveguide from external parabolic antenna (later addition), looking north. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

  5. View southeast of the barn showing its northwest corner. The ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View southeast of the barn showing its northwest corner. The collapsing chicken coop addition is shown at the northeast corner, upper left. - Tassi Ranch, Tassi Springs, Littlefield, Mohave County, AZ

  6. 32. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLANT AND LOCATION OF PROPOSED ADDITIONS, JULY 1898 SHEET NO. 1. Aperture card 4966-1 - Deer Island Pumping Station, Boston, Suffolk County, MA

  7. Interior view of north wall inside building 68 showing structural ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of north wall inside building 68 showing structural details. Door is access into small addition on north side of building. - Naval Air Station North Island, Seaplane Hangars, Roe Street, North Island, San Diego, San Diego County, CA

  8. 3. Exterior, detail view of north elevation, from northeast, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Exterior, detail view of north elevation, from northeast, showing joint of addition. Sept. 12, 1940. Mixon. - Upper Swedish Log Cabin, Darby Creek vicinity, Clifton Heights (Upper Darby Township), Darby, Delaware County, PA

  9. 11. SOUTH AND EAST SIDE, THREEQUARTER VIEW, DETAIL SHOWING SIXTHFLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. SOUTH AND EAST SIDE, THREE-QUARTER VIEW, DETAIL SHOWING SIXTH-FLOOR BRICK ADDITION AND ORIGINAL BRICK PILASTERS; LOOKING NORTHWEST - Crown Roller Mill, 105 Fifth Avenue, South, West Side Milling District, Minneapolis, Hennepin County, MN

  10. 5. SOUTHWEST CORNER, SHOWING WEST ELEVATION WITH BUILDING 8251 (AIRCRAFT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. SOUTHWEST CORNER, SHOWING WEST ELEVATION WITH BUILDING 8251 (AIRCRAFT MAINTENANCE AND REPAIR SHOPS BUILDING ADDITION) AT LEFT. - Loring Air Force Base, Arch Hangar, East of Arizona Road near southern end of runway, Limestone, Aroostook County, ME

  11. 7. INTERIOR OF LIVING ROOM SHOWING REMNANT OF ORIGINAL END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR OF LIVING ROOM SHOWING REMNANT OF ORIGINAL END WALL AND SMOOTH DRY-WALL FINISH OF 1965 ADDITION IN BACKGROUND. VIEW TO SOUTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  12. 7. VIEW SOUTHWEST, SHOWING NORTHEAST CORNER ENTRANCES TO TWO SERVICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW SOUTHWEST, SHOWING NORTHEAST CORNER ENTRANCES TO TWO SERVICE BAYS AND SHED ADDITION ON EAST WALL - Chesapeake Beach Railroad Engine House, 21 Yost Place, Seat Pleasant, Prince George's County, MD

  13. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  14. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  15. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  16. A novel fluorocyclophosphazene as bifunctional additive for safer lithium-ion batteries

    NASA Astrophysics Data System (ADS)

    Xia, Lan; Xia, Yonggao; Liu, Zhaoping

    2015-03-01

    A high-efficiency flame-retarding additive, (Ethoxy)pentafluorocyclotriphosphazene (N3P3F5OCH2CH3, PFPN), has been synthesized and explored as a safer protection additive for rechargeable lithium batteries. The flammability tests indicate that only the addition of 5 wt% PFPN can make the electrolyte be totally non-flammable. As far as we know, the PFPN additive is the most efficient one of any flame-retarding additive ever synthesized and reported in the literature. The charge-discharge results demonstrate that the PFPN additive shows a good electrochemical compatibility on the graphitic anode and LiCoO2 cathode. Meanwhile, the incorporated PFPN additive can greatly improve the cyclic performance of LiCoO2 electrode at a high cut-off voltage of 4.5 V, showing a prospective flame-retarding additive for the applications in high-voltage lithium ion batteries.

  17. 4. Contextual view of EPA Farm showing radwaste tank, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Contextual view of EPA Farm showing rad-waste tank, facing south-southeast. - Nevada Test Site, Environmental Protection Agency Farm, Area 15, Yucca Flat, 10-2 Road near Circle Road, Mercury, Nye County, NV

  18. 6. Contextual view of EPA Farm showing cattle shelter, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Contextual view of EPA Farm showing cattle shelter, facing southeast. - Nevada Test Site, Environmental Protection Agency Farm, Area 15, Yucca Flat, 10-2 Road near Circle Road, Mercury, Nye County, NV

  19. 2. Contextual view of EPA Farm showing milliongallon reservoir, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Contextual view of EPA Farm showing million-gallon reservoir, facing east-southeast. - Nevada Test Site, Environmental Protection Agency Farm, Area 15, Yucca Flat, 10-2 Road near Circle Road, Mercury, Nye County, NV

  20. 5. Contextual view of EPA Farm showing holding pens, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Contextual view of EPA Farm showing holding pens, facing west-southwest. - Nevada Test Site, Environmental Protection Agency Farm, Area 15, Yucca Flat, 10-2 Road near Circle Road, Mercury, Nye County, NV

  1. 30. STARBOARD REFUELING STATION STARBOARD LOOKING TO PORT SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. STARBOARD REFUELING STATION - STARBOARD LOOKING TO PORT SHOWING RIGGING, FUEL RISER, SHUT-OFF VALVE, TEST COCK AND PRESSURE GAUGE. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  2. CONTROL BUILDING, WEST FRONT SHOWING ENTRANCE Edwards Air Force ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CONTROL BUILDING, WEST FRONT SHOWING ENTRANCE - Edwards Air Force Base, X-15 Engine Test Complex, Firing Control Building, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA

  3. View of building 11070 showing vents and forced air system ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11070 showing vents and forced air system on east side, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  4. View of building 11180 looking southeast, showing wide eaves, eave ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11180 looking southeast, showing wide eaves, eave brackets, and flared elements at sill line. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Office Building, Fourth Street, China Lake, Kern County, CA

  5. Oblique view of building 11050, showing east and south sides, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Oblique view of building 11050, showing east and south sides, looking northwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Fire Station & Marine Barracks, D Street, at corner of 4th Street, China Lake, Kern County, CA

  6. 3. EXTERIOR VIEW, SHOWING CRANE SYSTEM BETWEEN BUILDING 20 AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. EXTERIOR VIEW, SHOWING CRANE SYSTEM BETWEEN BUILDING 20 AND 20A. - Wright-Patterson Air Force Base, Area B, Building No. 20A, Propeller Test Complex, Seventh Street, from E to G Streets, Dayton, Montgomery County, OH

  7. 8. INTERIOR VIEW, SHOWING CONVERTED STAND FOR COMPRESSOR RESEARCH. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR VIEW, SHOWING CONVERTED STAND FOR COMPRESSOR RESEARCH. - Wright-Patterson Air Force Base, Area B, Building No. 20A, Propeller Test Complex, Seventh Street, from E to G Streets, Dayton, Montgomery County, OH

  8. View of EPA Farm metal weather tower, facing east, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of EPA Farm metal weather tower, facing east, showing thirty-acre irrigated field - Nevada Test Site, Environmental Protection Agency Farm, Weather Tower, Area 15, Yucca Flat, 10-2 Road near Circle Road, Mercury, Nye County, NV

  9. 1. TERMINAL ROOM, INTERIOR, SHOP LEVEL, SHOWING FIRE EXTINGUISHING SYSTEM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. TERMINAL ROOM, INTERIOR, SHOP LEVEL, SHOWING FIRE EXTINGUISHING SYSTEM PIPES AND VALVES AT LEFT. Looking southeast from entrance to terminal room. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  10. 4. NORTH END OF TERMINAL ROOM, SHOP LEVEL SHOWING SPIRAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. NORTH END OF TERMINAL ROOM, SHOP LEVEL SHOWING SPIRAL STAIR TO CABLE RACK. Looking north. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  11. 2. TERMINAL ROOM, SHOP LEVEL INTERIOR, SHOWING MEZZANINE LEVEL CABLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. TERMINAL ROOM, SHOP LEVEL INTERIOR, SHOWING MEZZANINE LEVEL CABLE RACK AT UPPER RIGHT. Looking north. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A Terminal Room, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  12. Credit PSR. This view shows the north and west facades ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Credit PSR. This view shows the north and west facades of the building as seen when looking east southeast (1100). This structure was used to test regenerative fuel cells in 1995 - Jet Propulsion Laboratory Edwards Facility, Weigh & Test Preparation Building, Edwards Air Force Base, Boron, Kern County, CA

  13. 11. Historic view of Building 100 control room, showing personnel ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Historic view of Building 100 control room, showing personnel operating rocket engine test controls and observer watching activity from observation room. May 27, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-45020. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  14. 11. Exterior view, showing instrumentation and gauge panel at walkin ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Exterior view, showing instrumentation and gauge panel at walk-in entry level (bottom) of Test Cell 7, Systems Integration Laboratory Building (T-28), looking west. Metal stair at left leads to working platform levels surrounding test cell. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO

  15. 5. INSTRUMENT ROOM INTERIOR, SHOWING BACKS OF CONSOLE LOCKERS. Looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. INSTRUMENT ROOM INTERIOR, SHOWING BACKS OF CONSOLE LOCKERS. Looking northeast to firing control room passageway. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Firing Control Building, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

  16. 3. NORTHEAST REAR, SHOWING CONCRETE ENCASEMENT FOR STAIRWAY LEADING FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. NORTHEAST REAR, SHOWING CONCRETE ENCASEMENT FOR STAIRWAY LEADING FROM INSTRUMENT ROOM TO UNDERGROUND FIRING CONTROL ROOM. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Firing Control Building, Test Area 1-100, northeast end of Test Area 1-100 Road, Boron, Kern County, CA

  17. 12. DETAIL SHOWING EAST SIDE OF THE OXYGEN AND HYDROGEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. DETAIL SHOWING EAST SIDE OF THE OXYGEN AND HYDROGEN PRE-VALVE DECK (2ND LEVEL). Looking south. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  18. 15. DETAIL SHOWING HYDROGEN (LEFT) AND OXYGEN (RIGHT) SPHERICAL TANKS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. DETAIL SHOWING HYDROGEN (LEFT) AND OXYGEN (RIGHT) SPHERICAL TANKS ON RUN LINE DECK, THIRD LEVEL. DARK TONED PIPING IS THE FIRE EXTINGUISHING SYSTEM. Looking south southwest. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  19. 13. DETAIL SHOWING OXYGEN (LEFT) AND HYDROGEN (RIGHT) PREVALVES ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. DETAIL SHOWING OXYGEN (LEFT) AND HYDROGEN (RIGHT) PREVALVES ON SECOND DECK OF SUPERSTRUCTURE, ABOVE THE ENGINE. Looking northwest. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-A, Test Area 1-120, north end of Jupiter Boulevard, Boron, Kern County, CA

  20. "No-Shows": A Vexing Problem.

    ERIC Educational Resources Information Center

    Holmes, John; And Others

    1980-01-01

    What can we learn about the applicants who do not show up on campus to register? This study suggests both a method for learning more about "no-shows" and the reasons why they change their mind. (Author)

  1. Alzheimer's Gene May Show Effects in Childhood

    MedlinePlus

    ... page: https://medlineplus.gov/news/fullstory_159854.html Alzheimer's Gene May Show Effects in Childhood Brain scans ... 13, 2016 (HealthDay News) -- A gene related to Alzheimer's disease may start to show effects on brain ...

  2. Cuba shows jump in HIV positives.

    PubMed

    Cuba experienced a substantial increase in the number of HIV cases in 1996 due primarily to a growth of foreign tourism and an increase in prostitution, health officials said. The Juventud Rebelde newspaper said that since HIV/AIDS testing began in 1985, government-run hospitals and clinics have detected 1609 HIV-positive cases. In 1995 the total was reported at 1196, meaning that 413 new cases were detected in 1996. This compared with only 97 new cases reported during 1995. HIV infection among the island's 11 million inhabitants has remained relatively low due to a massive testing program and a public health infrastructure that provides universal and free medical treatment. Cuba was a pioneer in the use of interferon on those testing HIV-positive. Cuba produces its own interferon, which prolongs the life expectancy of patients, and also reagents for AIDS testing. There are special sanitariums for AIDS patients in most of Cuba's 12 provinces. Cuban adults who test HIV-positive are required to enter the sanitarium in a policy reminiscent of the way tuberculosis patients were tested in the US earlier in this century. Officials said the isolation of patients in sanitariums has been somewhat relaxed over past years by introducing greater flexibility in allowing persons who are considered reliable to live at home or make prolonged visits.

  3. Bilirubin Test

    MedlinePlus

    ... test in conjunction with other laboratory tests ( alkaline phosphatase , aspartate aminotransferase , alanine aminotransferase ) when someone shows signs ... Gilbert syndrome, due to low levels of the enzyme that produces conjugated bilirubin If conjugated (direct) bilirubin ...

  4. Mechanical properties of additively manufactured octagonal honeycombs.

    PubMed

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs. PMID:27612831

  5. Mechanical properties of additively manufactured octagonal honeycombs.

    PubMed

    Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2016-12-01

    Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs.

  6. Flue gas conditioning for improved particle collection in electrostatic precipitators. First topical report, Results of laboratory screening of additives

    SciTech Connect

    Durham, M.D.

    1993-04-16

    Several tasks have been completed in a program to evaluate additives to improve fine particle collection in electrostatic precipitators. Screening tests and laboratory evaluations of additives are summarized in this report. Over 20 additives were evaluated; four were found to improve flyash precipitation rates. The Insitec particle analyzer was also evaluated; test results show that the analyzer will provide accurate sizing and counting information for particles in the size range of {le} 10 {mu}m dia.

  7. 9. Credit JPL. Photographic copy of drawing, engineering drawing showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Credit JPL. Photographic copy of drawing, engineering drawing showing structure of Test Stand 'A' (Building 4202/E-3) and its relationship to the Monitor Building or blockhouse (Building 4203/E-4) when a reinforced concrete machinery room was added to the west side of Test Stand 'A' in 1955. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Electrical Layout - Muroc, Test Stand & Refrigeration Equipment Room,' drawing no. E3/7-0, April 6, 1955. - Jet Propulsion Laboratory Edwards Facility, Test Stand A, Edwards Air Force Base, Boron, Kern County, CA

  8. Lockheed Electra - animation showing air turbulence detection

    NASA Technical Reports Server (NTRS)

    1999-01-01

    On Mar. 24, 1998, an L-188 Electra aircraft owned by the National Science Foundation, Arlington, Virginia, and operated by the National Center for Atmospheric Research, Boulder, Colorado, flew near Boulder with an Airborne Coherent LiDAR (Light Detection and Ranging) for Advanced In-flight Measurement. This aircraft was on its first flight to test its ability to detect previously invisible forms of clear air turbulence. Coherent Technologies Inc., Lafayette, Colorado, built the LiDAR device for the NASA Dryden Flight Research Center, Edwards, California. NASA Dryden participated in the effort as part of the NASA Aviation Safety Program, for which the lead center was Langley Research Center, Hampton, Virginia. Results of the test indicated that the device did successfully detect the clear air turbulence. Computer animation of the clear air turbulence (CAT) detection system known as the 'Airborne Coherent LiDAR for Advanced In-flight Measurement' was tested aboard the National Science Foundation L-188 Lockheed Electra.

  9. DAST in Flight Showing Diverging Wingtip Oscillations

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Two BQM-34 Firebee II drones were modified with supercritical airfoils, called the Aeroelastic Research Wing (ARW), for the Drones for Aerodynamic and Structural Testing (DAST) program, which ran from 1977 to 1983. In this view of DAST-1 (Serial # 72-1557), taken on June 12, 1980, severe wingtip flutter is visible. Moments later, the right wing failed catastrophically and the vehicle crashed near Cuddeback Dry Lake. Before the drone was lost, it had made two captive and two free flights. Its first free flight, on October 2, 1979, was cut short by an uplink receiver failure. The drone was caught in midair by an HH-3 helicopter. The second free flight, on March 12, 1980, was successful, ending in a midair recovery. The third free flight, made on June 12, was to expand the flutter envelope. All of these missions launched from the NASA B-52. From 1977 to 1983, the Dryden Flight Research Center, Edwards, California, (under two different names) conducted the DAST Program as a high-risk flight experiment using a ground-controlled, pilotless aircraft. Described by NASA engineers as a 'wind tunnel in the sky,' the DAST was a specially modified Teledyne-Ryan BQM-34E/F Firebee II supersonic target drone that was flown to validate theoretical predictions under actual flight conditions in a joint project with the Langley Research Center, Hampton, Virginia. The DAST Program merged advances in electronic remote control systems with advances in airplane design. Drones (remotely controlled, missile-like vehicles initially developed to serve as gunnery targets) had been deployed successfully during the Vietnamese conflict as reconnaissance aircraft. After the war, the energy crisis of the 1970s led NASA to seek new ways to cut fuel use and improve airplane efficiency. The DAST Program's drones provided an economical, fuel-conscious method for conducting in-flight experiments from a remote ground site. DAST explored the technology required to build wing structures with less than

  10. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  11. The Language of Show Biz: A Dictionary.

    ERIC Educational Resources Information Center

    Sergel, Sherman Louis, Ed.

    This dictionary of the language of show biz provides the layman with definitions and essays on terms and expressions often used in show business. The overall pattern of selection was intended to be more rather than less inclusive, though radio, television, and film terms were deliberately omitted. Lengthy explanations are sometimes used to express…

  12. Serving Up Activities for TV Cooking Shows.

    ERIC Educational Resources Information Center

    Katchen, Johanna E.

    This paper documents a presentation given on the use of English-language television cooking shows in English-as-a-Second-Language (ESL) and English-as-a-Foreign-Language (EFL) classrooms in Taiwan. Such shows can be ideal for classroom use, since they have a predictable structure consisting of short segments, are of interest to most students,…

  13. The Physics of Equestrian Show Jumping

    ERIC Educational Resources Information Center

    Stinner, Art

    2014-01-01

    This article discusses the kinematics and dynamics of equestrian show jumping. For some time I have attended a series of show jumping events at Spruce Meadows, an international equestrian center near Calgary, Alberta, often referred to as the "Wimbledon of equestrian jumping." I have always had a desire to write an article such as this…

  14. Aquarium tests on aluminized ANFO

    SciTech Connect

    Goldstein, S.; Johnson, J.N.

    1981-01-01

    Aquarium test data are presented on commercially available ANFO and 7.5 wt % aluminized ANFO in 10-cm-i.d. clay pipe. The data obtained on the aluminized product show only sight measurable improvement in performance over the nonaluminized product, possibly because of inadequate control on initial sample density. Therefore, additional experiments were conducted on aluminized ANFO mixtures of our own composition to control initial sample density, aluminum concentration, and aluminum particle size. Direct measurement of shock pressures in the water were made with lithium niobate pressure transducers approx. 28 cm from the charge. These tests show that the addition of aluminum (average particle size < 100 ..mu..m) increases the peak pressure by more than 50% for the addition of 11 wt % aluminum to a standard (94/6) ANFO mixture. Tests conducted on 19 wt % aluminum showed a slightly smaller increase in peak pressure, indicating some optimal aluminum concentration for maximum shattering efficiency in blasting applications.

  15. Nature's Late-Night Light Shows

    NASA Astrophysics Data System (ADS)

    Peterson, Carolyn Collins

    2002-09-01

    In addition to stars and planets, there are other interesting lights to be seen in the night sky. The northern and southern lights, called the aurora borealis and aurora australis, are created by charged particles from the Sun reacting in Earth's magnetic field. Night-shining clouds or noctilucent clouds appear at evening twilight as a result of water vapor in the polar mesosphere. Zodiacal light can be seen stretching up from the horizon after sunset or before sunrise.

  16. Tank mixture additives approach to improve efficiency of bentazon against broadleaf weeds in peas.

    PubMed

    Balah, Mohamed A; Hanafi, Ahmad; Ghani, Sherif B Abdel

    2012-01-01

    Efficiency of different tank-mixed additives with bentazon at half rate was investigated on (Malva parviflora) and other broad leaf weeds compared with bentazon at the full recommended rate without additives in peas in open field. All the tested additives enhanced the efficiency of bentazon at the half rate. Nonyl phenol and toximol S proved to be the most effective additives in comparison with the full rate treatment. The tested treatments did not show any significant effect on chlorophyll content and soil microorganisms. Bentazon residues were determined in certain treatments to investigate the effect of the tested additives on bentazon deposition. Samples were extracted using QuEChERS method and residues were determined using LC-MS/MS. Residues after 24 hours in the half rate treatment reached 4 times lower than the Maximum Residues Limit (MRL) (0.11 mg kg(-1)), compared to the full rate treatment (0.51 mg kg(-1)), that was slightly above the MRL.

  17. Design and additive manufacture for flow chemistry.

    PubMed

    Capel, Andrew J; Edmondson, Steve; Christie, Steven D R; Goodridge, Ruth D; Bibb, Richard J; Thurstans, Matthew

    2013-12-01

    We review the use of additive manufacturing (AM) as a novel manufacturing technique for the production of milli-scale reactor systems. Five well-developed additive manufacturing techniques: stereolithography (SL), multi-jet modelling (MJM), selective laser melting (SLM), laser sintering (LS) and fused deposition modelling (FDM) were used to manufacture a number of miniaturised reactors which were tested using a range of organic and inorganic reactions. PMID:24100659

  18. Comparison of Weather Shows in Eastern Europe

    NASA Astrophysics Data System (ADS)

    Najman, M.

    2009-09-01

    Comparison of Weather Shows in Eastern Europe Television weather shows in Eastern Europe have in most cases in the high graphical standard. There is though a wast difference in duration and information content in the weather shows. There are few signs and regularities by which we can see the character of the weather show. The main differences are mainly caused by the income structure of the TV station. Either it is a fully privately funded TV relying on the TV commercials income. Or it is a public service TV station funded mainly by the national budget or fixed fee structure/tax. There are wast differences in duration and even a graphical presentation of the weather. Next important aspect is a supplier of the weather information and /or the processor. Shortly we can say, that when the TV show is produced by the national met office, the TV show consists of more scientific terms, synoptic maps, satellite imagery, etc. If the supplier is the private meteorological company, the weather show is more user-friendly, laical with less scientific terms. We are experiencing a massive shift in public weather knowledge and demand for information. In the past, weather shows consisted only of maps with weather icons. In todaýs world, even the laic weather shows consist partly of numerical weather model outputs - they are of course designed to be understandable and graphically attractive. Outputs of the numerical weather models used to be only a part of daily life of a professional meteorologist, today they are common part of life of regular people. Video samples are a part of this presentation.

  19. Effect of lubricant extreme-pressure additives on surface fatigue life of AISI 9310 spur gears

    NASA Technical Reports Server (NTRS)

    Scibbe, H. W.; Townsend, D. P.; Aron, P. R.

    1984-01-01

    Surface fatigue tests were conducted with AISI 9310 spur gears using a formulated synthetic tetraester oil (conforming to MIL-L-23699 specifications) as the lubricant containing either sulfur or phosphorus as the EP additive. Four groups of gears were tested. One group of gears tested without an additive in the lubricant acted as the reference oil. In the other three groups either a 0.1 wt % sulfur or phosphorus additive was added to the tetraester oil to enhance gear surface fatigue life. Test conditions included a gear temperature of 334 K (160 F), a maximum Hertz stress of 1.71 GPa (248 000 psi), and a speed of 10,000 rpm. The gears tested with a 0.1 wt % phosphorus additive showed pitting fatigue life 2.6 times the life of gears tested with the reference tetraester based oil. Although fatigue lives of two groups of gears tested with the sulfur additive in the oil showed improvement over the control group gear life, the results, unlike those obtained with the phosphorus oil, were not considered to be statistically significant.

  20. Accelerating procelain formation by incorporating a complex additive

    SciTech Connect

    Maslennikova, G.N.; Dubovitskii, S.A.; Moroz, I.K.

    1986-05-01

    The authors studied the influence of a complex additive consisting of oxides of calcium, zinc, and magnesium on the formaton of porcelain. In order to achieve a more uniform distribution of the complex additive in the porcelain body it was incorporated in the form of water soluble salts-nitrates, which ensured comparability of results and excluded the effect of the different types of anions. The study of the main parameters of sintering (porosity, shrinkage, and mechanical strength) for the test bodies showed that they sinter at lower temperatures and attain zero porosity, maximum shrinkage, and mechanical strength. The most typical bodies indentified in this way were investigated by methods of complex differential thermal analysis and x-ray diffraction. Thus, the introduction of complex additives consisting of calcium, zinc, and magnesium oxides contributes to the earlier formation of porcelain. With the reduction of firing temperatures by 100/sup 0/C the authors observe an improvement in the basic properties of porcelain.