Science.gov

Sample records for additional work including

  1. Photoactive devices including porphyrinoids with coordinating additives

    DOEpatents

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  2. 21. Southeast corner of switch house addition, including exterior transformers ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Southeast corner of switch house addition, including exterior transformers and start of power transmission line. Employee House No. 1 is in the background. - Rock Creek Hydroelectric Project, Rock Creek, Baker County, OR

  3. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    NASA Technical Reports Server (NTRS)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  4. 21. DETAIL VIEW OF MARSICAL WORKS CONDENSERS INCLUDING QUICKSILVER COLLECTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. DETAIL VIEW OF MARSICAL WORKS CONDENSERS INCLUDING QUICKSILVER COLLECTION CHANNEL AND COLLECTION BOX, CENTER FOREGROUND, LOOKING SOUTH, SOUTHEAST. - Mariscal Quicksilver Mine & Reduction Works, Terlingua, Brewster County, TX

  5. VIEW OF MARISCAL WORKS INCLUDING (POSSIBLE SOOT FURNACE), FOREGROUND, CONDENSERS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF MARISCAL WORKS INCLUDING (POSSIBLE SOOT FURNACE), FOREGROUND, CONDENSERS AND ORE BIN FOUNDATION ABOVE, LOOKING NORTHWEST. - Mariscal Quicksilver Mine & Reduction Works, Terlingua, Brewster County, TX

  6. 18. VIEW OF MARISCAL WORKS INCLUDING (POSSIBLE SOOT FURNACE), FOREGROUND, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. VIEW OF MARISCAL WORKS INCLUDING (POSSIBLE SOOT FURNACE), FOREGROUND, CONDENSERS, AND ORE BIN FOUNDATION ABOVE, LOOKING NORTHWEST. - Mariscal Quicksilver Mine & Reduction Works, Terlingua, Brewster County, TX

  7. Assessing the Doctoral Thesis When It Includes Published Work

    ERIC Educational Resources Information Center

    Sharmini, Sharon; Spronken-Smith, Rachel; Golding, Clinton; Harland, Tony

    2015-01-01

    In this article we explore how examiners assess a thesis that includes published work. An online survey was used to gather data on approaches to assessing publication-based theses (PBTs). The respondents were 62 supervisors who had experience examining PBTs across a range of disciplines at a research-intensive university in New Zealand. Nearly…

  8. 25 CFR 1000.83 - Can additional provisions be included in an AFA?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ANNUAL FUNDING AGREEMENTS UNDER THE TRIBAL SELF-GOVERNMENT ACT AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT Annual Funding Agreements for Bureau of Indian Affairs Programs Contents and Scope of Annual Funding Agreements § 1000.83 Can additional provisions be included in an AFA? Yes,...

  9. Maize chromosome and chromosome segment additions to oat including new B73 and Mo17 addition lines

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Oat-maize addition (OMA) lines with one, or occasionally more, chromosomes of maize (Zea mays L., 2n=2x=20) added to oat (Avena sativa L., 2n=6x=42) can be developed from oat x maize crosses. Self-fertile disomic addition lines for maize chromosomes 1, 2, 3, 4, 5, 6, 7, 9, short arm of 10, and a mon...

  10. EVAPORATION: a new vapour pressure estimation methodfor organic molecules including non-additivity and intramolecular interactions

    NASA Astrophysics Data System (ADS)

    Compernolle, S.; Ceulemans, K.; Müller, J.-F.

    2011-09-01

    We present EVAPORATION (Estimation of VApour Pressure of ORganics, Accounting for Temperature, Intramolecular, and Non-additivity effects), a method to predict (subcooled) liquid pure compound vapour pressure p0 of organic molecules that requires only molecular structure as input. The method is applicable to zero-, mono- and polyfunctional molecules. A simple formula to describe log10p0(T) is employed, that takes into account both a wide temperature dependence and the non-additivity of functional groups. In order to match the recent data on functionalised diacids an empirical modification to the method was introduced. Contributions due to carbon skeleton, functional groups, and intramolecular interaction between groups are included. Molecules typically originating from oxidation of biogenic molecules are within the scope of this method: aldehydes, ketones, alcohols, ethers, esters, nitrates, acids, peroxides, hydroperoxides, peroxy acyl nitrates and peracids. Therefore the method is especially suited to describe compounds forming secondary organic aerosol (SOA).

  11. Combinatorial Synthesis of Linearly Condensed Polycyclic Compounds, Including Anthracyclinones, Through Tandem Diels-Alder Additions

    NASA Astrophysics Data System (ADS)

    Vogel, Pierre

    Double exocyclic 1,3-dienes such as 2,3,5,6-tetramethylidene-7-oxabicyclo[2.2.1]heptane and its 1-substituted derivatives undergo two successive Diels-Alder additions with large reactivity difference between the addition of the first equivalent (k 1) and the second equivalent (k 2) of dienophile. This allows one to prepare, through parallel synthesis, a large number of linearly condensed polycyclic systems containing three annulated six-membered rings, including naphthacenyl systems and anthracyclinones. The large k 1/k 2 rate constant ratio is a consequence of the Dimroth principle, the first cycloaddition being significantly more exothermic then the second one. Control of regio- and stereoselectivity of the two successive cycloadditions is possible by 1-substitution of the 2,3,5,6-tetramethylidene-7-oxabicyclo[2.2.1]heptane, for instance by a 1-(dimethoxymethyl) group, or by stereoselective disubstitution of the double diene by arenesulfenyl substituents. Enantiomerically pure anthracyclinones and analogues are obtained using enantiomerically pure dienophiles such as 3-oxo-but-2-en-2-yl esters. The chemistry so-developed has allowed the preparation of enantiomerically pure 6-((aminoalkoxy)oxy)methyl-6,7-dideoxyidarubicinones that are DNA intercalators and inhibitors of topoisomerase II-induced DNA strained religation.

  12. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  13. 40 CFR 35.4140 - What must be included in my group's work plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Tag § 35.4140 What must be included in my group's work plan? (a) Your scope of work must clearly... work plan? 35.4140 Section 35.4140 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND... community. (b) Your scope of work must also clearly explain your project's milestones and the schedule...

  14. Genomic prediction of growth in pigs based on a model including additive and dominance effects.

    PubMed

    Lopes, M S; Bastiaansen, J W M; Janss, L; Knol, E F; Bovenhuis, H

    2016-06-01

    Independent of whether prediction is based on pedigree or genomic information, the focus of animal breeders has been on additive genetic effects or 'breeding values'. However, when predicting phenotypes rather than breeding values of an animal, models that account for both additive and dominance effects might be more accurate. Our aim with this study was to compare the accuracy of predicting phenotypes using a model that accounts for only additive effects (MA) and a model that accounts for both additive and dominance effects simultaneously (MAD). Lifetime daily gain (DG) was evaluated in three pig populations (1424 Pietrain, 2023 Landrace, and 2157 Large White). Animals were genotyped using the Illumina SNP60K Beadchip and assigned to either a training data set to estimate the genetic parameters and SNP effects, or to a validation data set to assess the prediction accuracy. Models MA and MAD applied random regression on SNP genotypes and were implemented in the program Bayz. The additive heritability of DG across the three populations and the two models was very similar at approximately 0.26. The proportion of phenotypic variance explained by dominance effects ranged from 0.04 (Large White) to 0.11 (Pietrain), indicating that importance of dominance might be breed-specific. Prediction accuracies were higher when predicting phenotypes using total genetic values (sum of breeding values and dominance deviations) from the MAD model compared to using breeding values from both MA and MAD models. The highest increase in accuracy (from 0.195 to 0.222) was observed in the Pietrain, and the lowest in Large White (from 0.354 to 0.359). Predicting phenotypes using total genetic values instead of breeding values in purebred data improved prediction accuracy and reduced the bias of genomic predictions. Additional benefit of the method is expected when applied to predict crossbred phenotypes, where dominance levels are expected to be higher. PMID:26676611

  15. All Means All: Including Students from Special Populations in School to Work Programs.

    ERIC Educational Resources Information Center

    Kellogg, Ann, Ed.

    This resource guide assists Wisconsin educators in successfully including students with disabilities in school-to-work activities with appropriate support services. Section 1 provides an overview of the School to Work Opportunities Act and Wisconsin's state plan for developing a comprehensive school-to-work system integrated with federal efforts…

  16. Collaborative Assessment: Working with Students Who Are Blind or Visually Impaired, Including Those with Additional Disabilities.

    ERIC Educational Resources Information Center

    Goodman, Stephen A., Ed.; Wittenstein, Stuart H., Ed.

    This book offers a comprehensive text on the assessment of students with blindness or visual impairment with a focus on approaches used at the California School for the Blind. An introductory chapter is by Frances K. Liefert and Marsha A. Silver. Eleven chapters have the following titles and authors: (1) "Introduction to Visual Impairment"…

  17. Additional records of metazoan parasites from Caribbean marine mammals, including genetically identified anisakid nematodes.

    PubMed

    Colón-Llavina, Marlene M; Mignucci-Giannoni, Antonio A; Mattiucci, Simonetta; Paoletti, Michela; Nascetti, Giuseppe; Williams, Ernest H

    2009-10-01

    Studies of marine mammal parasites in the Caribbean are scarce. An assessment for marine mammal endo- and ectoparasites from Puerto Rico and the Virgin Islands, but extending to other areas of the Caribbean, was conducted between 1989 and 1994. The present study complements the latter and enhances identification of anisakid nematodes using molecular markers. Parasites were collected from 59 carcasses of stranded cetaceans and manatees from 1994 to 2006, including Globicephala macrorhynchus, Kogia breviceps, Kogia sima, Lagenodelphis hosei, Mesoplodon densirostris, Peponocephala electra, Stenella longirostris, Steno bredanensis, Trichechus manatus. Tursiops truncatus, and Ziphius cavirostris. Sixteen species of endoparasitic helminthes were morphologically identified, including two species of acanthocephalans (Bolbosoma capitatum, Bolbosoma vasculosum), nine species of nematodes (Anisakis sp., Anisakis brevispiculata, Anisakis paggiae, Anisakis simplex, Anisakis typica, Anisakis ziphidarium, Crassicauda anthonyi, Heterocheilus tunicatus, Pseudoterranova ceticola), two species of cestodes (Monorygma grimaldi, Phyllobothrium delphini), and three species of trematodes (Chiorchis groschafti, Pulmonicola cochleotrema, Monoligerum blairi). The nematodes belonging to the genus Anisakis recovered in some stranded animals were genetically identified to species level based on their sequence analysis of mitochondrial DNA (629 bp of mtDNA cox 2). A total of five new host records and six new geographic records are presented. PMID:19582477

  18. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... scope of assassination record and additional records and information. 1290.4 Section 1290.4 Parks... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and additional records and information. The term record in assassination record and additional records...

  19. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... in scope of assassination record and additional records and information. 1290.4 Section 1290.4 Parks... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and additional records and information. The term record in assassination record and additional records...

  20. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... in scope of assassination record and additional records and information. 1290.4 Section 1290.4 Parks... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and additional records and information. The term record in assassination record and additional records...

  1. Does Working Memory Training Transfer? A Meta-Analysis Including Training Conditions as Moderators

    ERIC Educational Resources Information Center

    Schwaighofer, Matthias; Fischer, Frank; Bühner, Markus

    2015-01-01

    A meta-analysis was undertaken to reexamine near- and far-transfer effects following working-memory training and to consider potential moderators more systematically. Forty-seven studies with 65 group comparisons were included in the meta-analysis. Results showed near-transfer effects to short-term and working-memory skills that were sustained at…

  2. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 78.36-25... OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other... and any limitation(s) marked on them; and (2) Of the same or similar design and have the same...

  3. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid...

  4. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 196.34-25... VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition... the same method of operation as each other hybrid PFD carried on board....

  5. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 97.34-25... VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to... the same method of operation as each other hybrid PFD carried on board....

  6. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In... the same method of operation as each other hybrid PFD carried on board....

  7. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In... maintained in accordance with the procedures set out in the manual required for these devices by §...

  8. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking Petitions § 260.23 Petitions to amend 40 CFR part 273 to include additional hazardous wastes. (a) Any person... the Administrator that regulation under the universal waste regulations of 40 CFR part 273:...

  9. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking Petitions § 260.23 Petitions to amend 40 CFR part 273 to include additional hazardous wastes. (a) Any person... the Administrator that regulation under the universal waste regulations of 40 CFR part 273:...

  10. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking Petitions § 260.23 Petitions to amend 40 CFR part 273 to include additional hazardous wastes. (a) Any person... the Administrator that regulation under the universal waste regulations of 40 CFR part 273:...

  11. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking Petitions § 260.23 Petitions to amend 40 CFR part 273 to include additional hazardous wastes. (a) Any person... the Administrator that regulation under the universal waste regulations of 40 CFR part 273:...

  12. 40 CFR 260.23 - Petitions to amend 40 CFR part 273 to include additional hazardous wastes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL Rulemaking Petitions § 260.23 Petitions to amend 40 CFR part 273 to include additional hazardous wastes. (a) Any person... the Administrator that regulation under the universal waste regulations of 40 CFR part 273:...

  13. 14 CFR 11.77 - Is there any additional information I must include in my petition for designating airspace?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Is there any additional information I must include in my petition for designating airspace? 11.77 Section 11.77 Aeronautics and Space FEDERAL... of the agency, office, facility, or person who would have authority to permit the use of the...

  14. 78 FR 67369 - National Vaccine Injury Compensation Program: Addition to the Vaccine Injury Table to Include All...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... the category for new vaccines on the Table. See 70 FR 19092. Subsequently, the Secretary engaged in...). See 76 FR 36367. Since that time, quadrivalent influenza vaccines (meaning that they contain four...: Addition to the Vaccine Injury Table to Include All Vaccines Against Seasonal Influenza AGENCY:...

  15. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103... fees represent the Government's best estimate for growth that may be required throughout the contract..., Painting, Boilermaking, Pipe Fitting, Engineering (Production), Sheetmetal Work, Staging/Scaffolding,...

  16. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103... fees represent the Government's best estimate for growth that may be required throughout the contract..., Painting, Boilermaking, Pipe Fitting, Engineering (Production), Sheetmetal Work, Staging/Scaffolding,...

  17. 77 FR 4654 - Senior Community Service Employment Program; Final Rule, Additional Indicator on Volunteer Work

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-31

    ... on September 1, 2010. 75 FR 53786. Previously, an interim final rule (IFR) on performance measures... an Additional Indicator for Volunteer Work, on November 23, 2010. 75 FR 71514. The additional... adult civic engagement, cited a report from the Corporation for National and Community...

  18. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Additional Item Requirements (AIR)-growth work 1352.271-72 Section 1352.271-72 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1352.271-72 Additional Item...

  19. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Additional Item Requirements (AIR)-growth work 1352.271-72 Section 1352.271-72 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1352.271-72 Additional Item...

  20. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  1. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  2. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Additional Reports of Work-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System...

  3. EVAPORATION: a new vapor pressure estimation method for organic molecules including non-additivity and intramolecular interactions

    NASA Astrophysics Data System (ADS)

    Compernolle, S.; Ceulemans, K.; Müller, J.-F.

    2011-04-01

    We present EVAPORATION (Estimation of VApour Pressure of ORganics, Accounting for Temperature, Intramolecular, and Non-additivity effects), a method to predict vapour pressure p0 of organic molecules needing only molecular structure as input. The method is applicable to zero-, mono- and polyfunctional molecules. A simple formula to describe log10p0(T) is employed, that takes into account both a wide temperature dependence and the non-additivity of functional groups. In order to match the recent data on functionalised diacids an empirical modification to the method was introduced. Contributions due to carbon skeleton, functional groups, and intramolecular interaction between groups are included. Molecules typically originating from oxidation of biogenic molecules are within the scope of this method: carbonyls, alcohols, ethers, esters, nitrates, acids, peroxides, hydroperoxides, peroxy acyl nitrates and peracids. Therefore the method is especially suited to describe compounds forming secondary organic aerosol (SOA).

  4. Work of Adhesion in Al/SiC Composites with Alloying Element Addition

    NASA Astrophysics Data System (ADS)

    Fang, Xin; Fan, Tongxiang; Zhang, Di

    2013-11-01

    In the current work, a general methodology was proposed to demonstrate how to calculate the work of adhesion in a reactive multicomponent alloy/ceramic system. Applying this methodology, the work of adhesion of Al alloy/SiC systems and the influence of different alloying elements were predicted. Based on the thermodynamics of interfacial reaction and calculation models for component activities, the equilibrium compositions of the melts in Al alloy/SiC systems were calculated. Combining the work of adhesion models for reactive metal/ceramic systems, the work of adhesion in Al alloy/SiC systems both before and after the reaction was calculated. The results showed that the addition of most alloying elements, such as Mg, Si, and Mn, could increase the initial work of adhesion, while Fe had a slightly decreasing effect. As for the equilibrium state, the additions of Cu, Fe, Mn, Ni, Ti, and La could increase the equilibrium work of adhesion, but the additions of Mg and Zn had an opposite effect. Si was emphasized due to its suppressing effect on the interfacial reaction.

  5. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103... requested by the Contracting Officer, material quotes shall be provided. (3) Subcontractor estimates, individually broken out and priced along with the actual subcontractor quotes. The requirement to...

  6. Age and work environment characteristics in relation to sleep: Additive, interactive and curvilinear effects.

    PubMed

    Parkes, Katharine R

    2016-05-01

    Although additive combinations of age and work environment characteristics have been found to predict sleep impairment, possible age x work environment interactions have been largely disregarded. The present study examined linear and curvilinear interactions of age with work environment measures in relation to sleep quality and duration. Survey data were collected from offshore day-shift personnel (N = 901). Main effects and interactions of the age terms with work environment measures (job demand, control, and social support, physical environment and strenuous work) were evaluated. Sleep duration was predicted by a curvilinear interaction, age(2)x job demand (p < .005), and by the age x social support interaction (p < .002); sleep quality was predicted by age x job demand (p < .002). Job control and physical environment showed significant additive effects. At a time when older employees are encouraged to remain in the workforce, the findings serve to increase understanding of how ageing and work demands jointly contribute to sleep impairment. PMID:26851463

  7. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  8. Performance of portland limestone cements: Cements designed to be more sustainable that include up to 15% limestone addition

    NASA Astrophysics Data System (ADS)

    Barrett, Timothy J.

    In 2009, ASTM and AASHTO permitted the use of up to 5% interground limestone in ordinary portland cement (OPC) as a part of a change to ASTM C150/AASHTO M85. When this work was initiated a new proposal was being discussed that would enable up to 15% interground limestone cement to be considered in ASTM C595/AASHTO M234. This work served to provide rapid feedback to the state department of transportation and concrete industry for use in discussions regarding these specifications. Since the time this work was initiated, ASTM C595/AASHTO M234 was passed (2012c) and PLCs are now able to be specified, however they are still not widely used. The proposal for increasing the volume of limestone that would be permitted to be interground in cement is designed to enable more sustainable construction, which may significantly reduce the CO2 that is embodied in the built infrastructure while also extending the life of cement quarries. Research regarding the performance of cements with interground limestone has been conducted by the cement industry since these cements became widely used in Europe over three decades ago, however this work focuses on North American Portland Limestone Cements (PLCs) which are specifically designed to achieve similar performance as the OPCs they replace.This thesis presents a two-phase study in which the potential for application of cements containing limestone was assessed. The first phase of this study utilized a fundamental approach to determine whether cement with up to 15% of interground or blended limestone can be used as a direct substitute to ordinary portland cement. The second phase of the study assessed the concern of early age shrinkage and cracking potential when using PLCs, as these cements are typically ground finer than their OPC counterparts. For the first phase of the study, three commercially produced PLCs were obtained and compared to three commercially produced OPCs made from the same clinker. An additional cement was tested

  9. GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

    EPA Science Inventory

    In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

  10. CEBAF energy upgrade program including re-work of CEBAF cavities

    SciTech Connect

    Joseph Preble

    2008-02-12

    The Thomas Jefferson National Accelerator Facility, Jefferson Lab, is planning an upgrade of the CEBAF accelerator from a maximum energy of 6 GeV to 12 GeV and from 3 to 4 experimental halls. This paper will discuss the plans for upgrading the energy of the machine which requires improvements of the existing Super Conducting Radio Frequency (SRF) cryomodules and the additions of ten newly designed high performance SRF cryomodules.

  11. Integrating Counselling, Psychotherapy and Healing: An Inquiry into Counsellors and Psychotherapists Whose Work Includes Healing.

    ERIC Educational Resources Information Center

    West, William

    1997-01-01

    A qualitative study of 30 counselors or psychotherapists revealed numerous themes. These major themes include the following: transition by the practitioner toward the use of healing; the taboo over talking about spiritual and healing experiences; the nature of healing as distinct from therapy; supervision difficulties; and the concept of spiritual…

  12. Major histocompatibility complex harbors widespread genotypic variability of non-additive risk of rheumatoid arthritis including epistasis.

    PubMed

    Wei, Wen-Hua; Bowes, John; Plant, Darren; Viatte, Sebastien; Yarwood, Annie; Massey, Jonathan; Worthington, Jane; Eyre, Stephen

    2016-01-01

    Genotypic variability based genome-wide association studies (vGWASs) can identify potentially interacting loci without prior knowledge of the interacting factors. We report a two-stage approach to make vGWAS applicable to diseases: firstly using a mixed model approach to partition dichotomous phenotypes into additive risk and non-additive environmental residuals on the liability scale and secondly using the Levene's (Brown-Forsythe) test to assess equality of the residual variances across genotype groups per marker. We found widespread significant (P < 2.5e-05) vGWAS signals within the major histocompatibility complex (MHC) across all three study cohorts of rheumatoid arthritis. We further identified 10 epistatic interactions between the vGWAS signals independent of the MHC additive effects, each with a weak effect but jointly explained 1.9% of phenotypic variance. PTPN22 was also identified in the discovery cohort but replicated in only one independent cohort. Combining the three cohorts boosted power of vGWAS and additionally identified TYK2 and ANKRD55. Both PTPN22 and TYK2 had evidence of interactions reported elsewhere. We conclude that vGWAS can help discover interacting loci for complex diseases but require large samples to find additional signals. PMID:27109064

  13. Major histocompatibility complex harbors widespread genotypic variability of non-additive risk of rheumatoid arthritis including epistasis

    PubMed Central

    Wei, Wen-Hua; Bowes, John; Plant, Darren; Viatte, Sebastien; Yarwood, Annie; Massey, Jonathan; Worthington, Jane; Eyre, Stephen

    2016-01-01

    Genotypic variability based genome-wide association studies (vGWASs) can identify potentially interacting loci without prior knowledge of the interacting factors. We report a two-stage approach to make vGWAS applicable to diseases: firstly using a mixed model approach to partition dichotomous phenotypes into additive risk and non-additive environmental residuals on the liability scale and secondly using the Levene’s (Brown-Forsythe) test to assess equality of the residual variances across genotype groups per marker. We found widespread significant (P < 2.5e-05) vGWAS signals within the major histocompatibility complex (MHC) across all three study cohorts of rheumatoid arthritis. We further identified 10 epistatic interactions between the vGWAS signals independent of the MHC additive effects, each with a weak effect but jointly explained 1.9% of phenotypic variance. PTPN22 was also identified in the discovery cohort but replicated in only one independent cohort. Combining the three cohorts boosted power of vGWAS and additionally identified TYK2 and ANKRD55. Both PTPN22 and TYK2 had evidence of interactions reported elsewhere. We conclude that vGWAS can help discover interacting loci for complex diseases but require large samples to find additional signals. PMID:27109064

  14. Highly enantioselective and efficient synthesis of flavanones including pinostrobin through the rhodium-catalyzed asymmetric 1,4-addition.

    PubMed

    Korenaga, Toshinobu; Hayashi, Keigo; Akaki, Yusuke; Maenishi, Ryota; Sakai, Takashi

    2011-04-15

    An efficient synthesis of bioactive chiral flavanones (1) was achieved through the Rh-catalyzed asymmetric 1,4-addition of arylboronic acid to chromone. The reaction in toluene proceeded smoothly at room temperature in the presence of 0.5% Rh catalyst with electron-poor chiral diphosphine MeO-F(12)-BIPHEP. In this reaction, the 1,2-addition to (S)-1 frequently occurred to yield (2S,4R)-2,4-diaryl-4-chromanol as a byproduct, which could be reduced by changing the reaction solvent to CH(2)Cl(2) to deactivate the Rh catalyst (3% required). PMID:21413690

  15. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  16. Personality, work characteristics, and employee well-being: a longitudinal analysis of additive and moderating effects.

    PubMed

    Houkes, Inge; Janssen, Peter P M; de Jonge, Jan; Bakker, Arnold B

    2003-01-01

    This study tested the longitudinal influence of personality (measured by the characteristics growth need strength, negative affectivity [NA], and upward striving) on 3 psychological outcomes (intrinsic work motivation, emotional exhaustion, and turnover intention), using a pattern of specific relationships between work characteristics and these outcomes as a framework. The study hypotheses were tested in a multioccupational sample consisting of bank employees and teachers, using a 2-wave panel design with a 1-year time interval and structural equation modeling. NA had a cross-lagged direct and additive relationship with emotional exhaustion and also moderated the relationship between Time 1 workload and Time 2 emotional exhaustion. The authors concluded that NA may have multiple effects on emotional exhaustion that persist over time. PMID:12553527

  17. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  18. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  19. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  20. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  1. 7 CFR 984.437 - Methods for proposing names of additional candidates to be included on walnut growers' nomination...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to be included on walnut growers' nomination ballots. 984.437 Section 984.437 Agriculture Regulations... ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE WALNUTS GROWN IN CALIFORNIA Administrative... walnut growers' nomination ballots. (a) With regard to Board grower member positions specified in §...

  2. 17 CFR 230.432 - Additional information required to be included in prospectuses relating to tender offers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... required to be included in prospectuses relating to tender offers. 230.432 Section 230.432 Commodity and... prospectuses relating to tender offers. Notwithstanding the provisions of any form for the registration of securities under the Act, any prospectus relating to securities to be offered in connection with a...

  3. 45 CFR 286.80 - What information on minimum work participation requirements must a Tribe include in its Tribal...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... requirements must a Tribe include in its Tribal Family Assistance Plan? 286.80 Section 286.80 Public Welfare... Content and Processing § 286.80 What information on minimum work participation requirements must a Tribe include in its Tribal Family Assistance Plan? (a) To assess a Tribe's level of success in meeting its...

  4. Hypersensitivity to electricity: working definition and additional characterization of the syndrome.

    PubMed

    Hillert, L; Hedman, B K; Söderman, E; Arnetz, B B

    1999-11-01

    Those who believe that electric appliances trigger adverse symptoms have coined the label hypersensitivity to electricity. Scientific research has not been able to identify a direct link between electromagnetic fields and symptoms, and no diagnostic criteria exist. Groups with reported hypersensitivity are very heterogeneous. A need exists for an operational working definition and improved characterization of groups. We report an investigation of symptoms and risk indicators associated with reported hypersensitivity to electricity-based on a survey at a high-technology, multinational telecommunications corporation. Comparisons are also made with patients referred to a university department of occupational and environmental health. No association was found between specific psychosocial work characteristics nor personal traits and hypersensitivity to electricity. We present skin and neurovegetative symptom indices. Results indicate that skin, and not neurovegetative symptoms, characterize the syndrome, at least during the first years of illness. For characterization, we propose a set of dimensions, including triggering factors, behavior, and duration of symptoms. PMID:10624841

  5. An extension of the Kocks-Mecking model of work hardening to include kinematic hardening and its application to solutes in ferrite

    NASA Astrophysics Data System (ADS)

    Bouaziz, O.; Barbier, D.; Embury, J. D.; Badinier, G.

    2013-01-01

    It is well known that the addition of a solute can change both work-hardening characteristics and yield stress; however, there are few available models which describe the role of a solute in relation to both the isotropic and kinematic aspects of work hardening. The current work extends the well-established approach of Kocks and Mecking to include the occurrence of cross slip and its dependence on solute content. The proposed model is compared with experimental data for the system Fe-Al by reference both to the observed work hardening in monotonic loading and the Bauschinger effect measured in reverse shear tests. The agreement between the model and the experimental data is satisfactory and suggests a new description of work hardening which includes a prediction of the ratio of isotropic and kinematic hardening for a given solute content.

  6. Use of additive technologies for practical working with complex models for foundry technologies

    NASA Astrophysics Data System (ADS)

    Olkhovik, E.; Butsanets, A. A.; Ageeva, A. A.

    2016-07-01

    The article presents the results of research of additive technology (3D printing) application for developing a geometrically complex model of castings parts. Investment casting is well known and widely used technology for the production of complex parts. The work proposes the use of a 3D printing technology for manufacturing models parts, which are removed by thermal destruction. Traditional methods of equipment production for investment casting involve the use of manual labor which has problems with dimensional accuracy, and CNC technology which is less used. Such scheme is low productive and demands considerable time. We have offered an alternative method which consists in printing the main knots using a 3D printer (PLA and ABS) with a subsequent production of castings models from them. In this article, the main technological methods are considered and their problems are discussed. The dimensional accuracy of models in comparison with investment casting technology is considered as the main aspect.

  7. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    During the summer and fall of 1977, 533 water and 1226 sediment samples were collected from 1740 locations within the 18,000 km/sup 2/ area of the Newcastle quadrangle, Wyoming. Water samples were collected from wells and springs; sediment samples were collected from stream channels and from springs. Each water sample was analyzed for uranium, and each sediment sample was analyzed for 43 elements, including uranium and thorium. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations (>20 ppB) generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District.

  8. Uranium hydrogeochemical and stream sediment reconnaissance of the Newcastle NTMS Quadrangle, Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Goff, S.J.; Sandoval, W.F.; Gallimore, D.L.; Talcott, C.L.; Martinez, R.G.; Minor, M.E.; Mills, C.F.

    1980-06-01

    Water and sediment samples were collected and each water sample was analyzed for U, and each sediment sample was analyzed for 43 elements, including U and Th. Uranium concentrations in water samples range from below the detection limit of 0.02 ppB to 702.26 ppB and have a median of 1.73 ppB and a mean of 11.76 ppB. Water samples containing high uranium concentrations generally are associated with known uranium mining activity or units known to be uranium bearing. About one-third of the water samples containing high uranium concentrations were collected from locations within the Pumpkin Buttes and Turnercrest-Ross Districts. Nearly half of the water samples containing high uranium concentrations were collected from locations just west of the Monument Hill and Highland Flats-Box Creek Districts. Similar anomalous uranium concentrations in this region have been reported updip from Exxon's Highland uranium deposits. High uranium concentrations were also found associated with the Lance Creek-Old Woman Anticline District. Uranium concentrations in sediment samples range from 1.14 to 220.70 ppM and have a median of 3.37 ppM and a mean of 4.03 ppM. Throughout the major uranium mining districts of the Powder River Basin, sediment samples with high uranium concentrations were collected from dry streams located near wells producing water samples with high uranium concentrations. High uranium concentrations were also found associated with the Lance Creek oil field where uranium mineralization is known in the White River formation. High uranium concentrations were also found in sediment samples in areas where uranium mineralization is not known. These samples are from dry streams in areas underlain by the White River formation, the Niobrara formation, and the Pierre, Carlisle, Belle Fourche, and Mowry shales.

  9. Work while receiving disability insurance benefits: additional findings from the New Beneficiary Followup Survey.

    PubMed

    Schechter, E S

    1997-01-01

    From the foregoing analyses, the following picture emerges about persons who work after award of DI benefits: Almost one-quarter of the sample population attempted to reenter the labor force in the 10-year NBS-NBF period. The higher the level of education, the greater the proportion of persons who worked. Younger beneficiaries were more likely to work than older beneficiaries. About half of the beneficiaries who worked did so on a full-time (40-hour-or-more per week) basis. Most beneficiaries worked because of financial need. The profile of reasons for working did not vary across demographic groups and aspects of the first job held. Most beneficiaries began working without attributing this decision to an improvement in their health. Individuals pursued different methods of job search. No single approach emerged as the most successful. Job search modes did not vary for different groups and different jobs. Four activities were most likely to lead to job offers: persons checking where they had worked before, asking a friend, answering an ad, and following up a vocational rehabilitation lead. These findings were not conclusive because small numbers of persons engaged in these activities. Thirty percent of DI workers returned to their preentitlement employer. The beneficiaries' first postentitlement jobs had less exertion, fewer hours, and lower pay than did their job held prior to award. The likelihood of working was the same across a broad range of disabling health conditions. In terms of work return policy, formal work return programs aimed at young beneficiaries and those with higher levels of educational attainment would produce the greatest number of job placements. It appears that no targeting of programs is necessary along gender lines. The anomalous finding of an absence of the relationship between improvement in health and labor-force reentry requires further investigation. Any followup in this area of inquiry should plan to have the data collected close to

  10. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  11. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  12. Preparations and properties of anti-corrosion additives of water-soluble metal working fluids for aluminum alloy materials.

    PubMed

    Watanabe, Shoji

    2008-01-01

    This short review describes various types of anti-corrosion additives of water-soluble metal working fluids for aluminum alloy materials. It is concerned with synthetic additives classified according to their functional groups; silicone compounds, carboxylic acids and dibasic acids, esters, Diels-Alder adducts, various polymers, nitrogen compounds, phosphoric esters, phosphonic acids, and others. Testing methods for water-soluble metal working fluids for aluminum alloy materials are described for a practical application in a laboratory. PMID:18075217

  13. Site Selection for the European ELT: working package included in the European FP6 ``ELT design study'' contract

    NASA Astrophysics Data System (ADS)

    Muñoz-Tuñón, C.; Sarazin, M.; Vernin, J.

    2007-10-01

    The site selection for the future European Large Telescope (E-ELT) is a key issue within the European proposal funded by the European Union (EU), within the ``ELT design study'' proposal. The organization, working scheme and baseline frameworks are reviewed. For the definition of the working package WP12000 ``Site Characterization'', important use has been done of previous work in the definition of techniques and tools for the study of the atmosphere above observing sites. We have also taken advantage of the number of data already available which have naturally defined a ranking among the known places which have also been taken as a base line for pre-selecting the candidate sites. The work will last 4 years, it started in 2005 and is organized in subtasks, working packages WP, whose main objectives are the following: WP12100: to characterize two top astronomical sites (ORM and North-Paranal) and to explore three other alternatives (Macon in Argentina, Izaña in Spain and Aklim in Morocco) suitable to install an ELT under the best conditions (Dome C is been currently under investigation, and no particular effort will be put in this site, but rather its atmospheric properties will be compared to the above mentioned sites). WP12200 is dedicated to design, build and operate a set of standard equipment in all the sites and to perform long term campaign. WP12300 will investigate wavefront properties over large baselines (50-100 m) corresponding to the size of the future ELT, as well as the fine characterization of the optical turbulence within the boundary layer. A similar plan is being carried out by the Thirty Meter Telescope (TMT) site selection team. For the sake of saving resources (budget and people), the TMT preselected sites (all in the American Continent) are not included in our European study.

  14. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    ERIC Educational Resources Information Center

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  15. McGraw Hill encyclopedia of science and technology. An international reference work in fifteen volumes including an index

    SciTech Connect

    Not Available

    1982-01-01

    This extensively revised and updated 5th Edition features contributions by 3000 distinguished experts - including 16 Nobel Prize winners - working with an international advisory board and 60 consulting editors. Thorough coverage is devoted to 75 separate disciplines in science and technology, from acoustics and biochemistry through fluid mechanics and geophysics to thermodynamics and vertebrate zoology. Detailed entries examine not only the physical and natural sciences, but also all engineering disciplines, discussing both the basic and the most recent theories, concepts, terminology, discoveries, materials, methods, and techniques. All of the new developments and technical advances that have occurred during the last five years - in each of the 75 disciplines - have been added to the encyclopedia and are explored in depth. Completely new material deals with such timely and newsworthy subjects as genetic engineering, artificial intelligence, nuclear medicine, desertification, psycholinguistics, industrial robots, and immunoassay. Also covered in extensive entries are such current topics as video disk recording, metallic glasses, acoustic levitation, magnetic bubble memory, gluons, and computerized tomography. The encyclopedia includes more than 15,000 photographs, drawings, maps, charts, and diagrams, shown in full-color, two-color, or black-and-white reproductions.

  16. 41 CFR 102-5.25 - What additional guidance concerning home-to-work transportation should Federal agencies issue?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What additional guidance concerning home-to-work transportation should Federal agencies issue? 102-5.25 Section 102-5.25 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION GENERAL...

  17. Summary of the working group 3: Electron beams from electromagnetic structures, including dielectric and laser-driven structures

    NASA Astrophysics Data System (ADS)

    Wuensch, Walter; Hommelhoff, Peter

    2016-09-01

    In this lively working group a diverse set of topics was discussed, spanning from novel methods in RF-cavity production via investigations of high-gradient breakdown and upcoming accelerator test facilities to new acceleration concepts. Because the talks were not divided into topics a broad range of expertise was always present during all presentations in seminar room "Sala Bonaparte 2". While the topics covered were broadly distributed, the report on the demonstration of high-gradient dielectric wakefield acceleration by the UCLA group was certainly considered as a highlight of this working group.

  18. The Challenges of Implementing Group Work in Primary School Classrooms and Including Pupils with Special Educational Needs

    ERIC Educational Resources Information Center

    Baines, Ed; Blatchford, Peter; Webster, Rob

    2015-01-01

    Findings from two studies are discussed in relation to the experiences and challenges faced by teachers trying to implement effective group work in schools and classrooms and to reflect on the lessons learnt about how to involve pupils with special educational needs (SEN). The first study reports on UK primary school teachers' experiences of…

  19. 76 FR 29797 - International Automotive Components, North America, Including On-Site Leased Workers From At-Work...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-23

    ... notice was published in the Federal Register on April 22, 2011 (76 FR 22732). At the request of the State... Federal Register on February 23, 2009 (74 FR 8115). In order to avoid an overlap in worker group coverage... Employment and Training Administration International Automotive Components, North America, Including On-...

  20. Study Modules for Calculus-Based General Physics. [Includes Modules 6 and 7: Work and Energy; Applications of Newton's Laws].

    ERIC Educational Resources Information Center

    Fuller, Robert G., Ed.; And Others

    This is part of a series of 42 Calculus Based Physics (CBP) modules totaling about 1,000 pages. The modules include study guides, practice tests, and mastery tests for a full-year individualized course in calculus-based physics based on the Personalized System of Instruction (PSI). The units are not intended to be used without outside materials;…

  1. Summary of the Working Group 3: Electron beams from electromagnetic structures, including dielectric and laser-driven

    NASA Astrophysics Data System (ADS)

    Rosenzweig, J.; Conde, M.; leaders, WG

    2014-03-01

    In this working group advances in electromagnetic accelerating structures have been addressed, as they progress from radiofrequency towards new frontiers at short wavelengths and higher field, in excess of a GV/m. The discussion focused on schemes powered by advanced RF sources, as well as new sources of EM power such as Cerenkov wakefields, and intense lasers at wavelengths ranging from the visible to the mid-IR. Advanced and exotic structures using novel materials and photonic designs have been also examined. In this context one needed to place special emphasis on extreme high brightness electron beam sources that are demanded in optical-to-mm-scale accelerators, and on beam dynamics issues specific to the optical scale, and to use of ultra-high amplitude fields.

  2. Including the people with disabilities at work: a case study of the job of bricklayer in civil construction in Brazil.

    PubMed

    Martins, L B; Barkokébas Junior, B; Guimarães, B M

    2012-01-01

    The aim of this paper is to present the results of the evaluation of the job of bricklayer in the construction industry to determine the profile of workers with disabilities who could perform this function and what adjustments are needed. The methods and techniques used in the field study were: direct observation of the activities and the environment, interviews with bricklayers on building sites, a video and photographic record of tasks being carried out to analyze the job of bricklayer, software resources were used. This study set out the disabilities most commonly caused by work accidents in the civil construction industry and simulated the conditions of the individuals to determine whether they could perform the activities of this function and what adaptations are needed. It was observed that workers with hearing impairments could perform activities without any change in the workplace and individuals who had had a leg or foot amputated need to use appropriate prostheses to perform the activities of the function. Thus, it was shown that the activity of professionals with experience in Ergonomics is essential since, by the activity of gathering data and analysing the physical, cognitive and organizational requirements of jobs and by collecting data on and analysing the functional capabilities of the worker with a disability, adaptations to jobs can be adequately defined. PMID:22317447

  3. The ACCEND program: a combined BS and MS program in environmental engineering that includes co-operative work experience.

    PubMed

    Bishop, P L; Keener, T C; Kukreti, A R; Kowel, S T

    2004-01-01

    Environmental engineering education has rapidly expanded in recent years and new teaching methods are needed. Many professionals and educators believe that a MS degree in environmental engineering should be the minimum in order to practice the profession, along with practical training. This paper describes an innovative program being offered at the University of Cincinnati that combines an integrated BS in civil engineering and an MS in environmental engineering with extensive practical co-operative education (co-op) experience, all within a five-year period. The program includes distance learning opportunities during the co-op periods. The result is a well-trained graduate who will receive higher pay and more challenging career opportunities, and who will have developed professionalism and maturity beyond that from traditional engineering programs. PMID:15193097

  4. The work of the European Union Reference Laboratory for Food Additives (EURL) and its support for the authorisation process of feed additives in the European Union: a review

    PubMed Central

    von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; de la Huebra, María José González; Ezerskis, Zigmas

    2016-01-01

    ABSTRACT This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods. PMID:26540604

  5. Including xpc® feed additive in the diet of inoculated broilers during grow-out helps control salmonella associated with their carcasses after processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this study was to test XPC® feed additive for control of Salmonella in poultry meat products. Day of hatch broiler chicks were gavaged with 106 cells of a nalidixic acid resistant marker strain of Salmonella Typhimurium and placed on clean pine shavings in 9 separate floor pens (25 ...

  6. Work.

    ERIC Educational Resources Information Center

    Haines, Annette M.

    2003-01-01

    Draws upon Maria Montessori's writings to examine work as a universal human tendency throughout life. Discusses the work of adaptation of the infant, work of "psycho-muscular organism" for the preschooler, work of the imagination for the elementary child, community work of the adolescent, and work of the adult. Asserts that Montessorians' role is…

  7. Quantum ring-polymer contraction method: Including nuclear quantum effects at no additional computational cost in comparison to ab initio molecular dynamics

    NASA Astrophysics Data System (ADS)

    John, Christopher; Spura, Thomas; Habershon, Scott; Kühne, Thomas D.

    2016-04-01

    We present a simple and accurate computational method which facilitates ab initio path-integral molecular dynamics simulations, where the quantum-mechanical nature of the nuclei is explicitly taken into account, at essentially no additional computational cost in comparison to the corresponding calculation using classical nuclei. The predictive power of the proposed quantum ring-polymer contraction method is demonstrated by computing various static and dynamic properties of liquid water at ambient conditions using density functional theory. This development will enable routine inclusion of nuclear quantum effects in ab initio molecular dynamics simulations of condensed-phase systems.

  8. Study Modules for Calculus-Based General Physics. [Includes Modules 1 and 2: Dimensions and Vector Addition; Rectilinear Motion; plus a Trigonometry and Calculus Review].

    ERIC Educational Resources Information Center

    Fuller, Robert G., Ed.; And Others

    This is part of a series of 42 Calculus Based Physics (CBP) modules totaling about 1,000 pages. The modules include study guides, practice tests, and mastery tests for a full-year individualized course in calculus-based physics based on the Personalized System of Instruction (PSI). The units are not intended to be used without outside materials;…

  9. Localization of eight additional genes in the human major histocompatibility complex, including the gene encoding the casein kinase II {beta} subunit (CSNK2B)

    SciTech Connect

    Albertella, M.R.; Jones, H.; Thomson, W.

    1996-09-01

    A wide range of autoimmune and other diseases are known to be associated with the major histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility complex. Many of these diseases are linked to the genes encoding the polymorphic histocompatibility antigens in the class I and class II regions, but some appear to be more strongly associated with genes in the central 1100-kb class III region, making it important to characterize this region fully for the presence of novel genes. An {approximately}220-kb segment of DNA in the class III region separating the Hsp70 (HSPA1L) and BAT1 (D6S8IE) genes, which was previously known to contain 14 genes. Genomic DNA fragments spanning the gaps between the known genes were used as probes to isolate cDNAs corresponding to five new genes within this region. Evidence from Northern blot analysis and exon trapping experiments that suggested the presence of at least two more new genes was also obtained. Partial cDNA and complete exonic genomic sequencing of one of the new genes has identified it as the casein kinase II{beta} subunit (CSNK2B). Two of the other novel genes lie within a region syntenic to that implicated in susceptibility to experimental allergic orchitis in the mouse, an autoimmune disease of the testis, and represent additional candidates for the Orch-1 locus associated with this disease. In addition, characterization of the 13-kb intergenic gap separating the RD (D6545) and G11 (D6S60E) genes has revealed the presence of a gene encoding a 1246-amino-acid polypeptide that shows significant sequence similarity to the yeast anti-viral Ski2p gene product. 49 refs., 8 figs.

  10. Petrographic and Geochemical Characterization of Ore-Bearing Intrusions of the Noril'sk type, Siberia; With Discussion of Their Origin, Including Additional Datasets and Core Logs

    USGS Publications Warehouse

    Czamanske, Gerald K., (compiler)

    2002-01-01

    The Noril'sk I, Talnakh, and Kharaelakh intrusions of the Noril'sk district host one of the outstanding metal concentrations in the world; contained Cu-Ni resources are comparable to the deposits at Sudbury, Ontario and the platinum group element (PGE) resource is second only to that of the Bushveld Complex. Our opportunity to cooperatively sample and study this district in Siberian Russia arose in 1990 through a memorandum of understanding between the U.S. Geological Survey and the former Ministry of Geology of the U.S.S.R. The world-class significance of these deposits and the possibility that understanding their geologic context, including construction of a credible 'ore-deposit model,' will lead to discovery of similar deposits elsewhere, inspired extensive studies of the ores, the mafic-intrusions which host them, and associated flood basalts.

  11. Uranium hydrogeochemical and stream sediment reconnaissance of the Dalhart NTMS quadrangle, New Mexico/Texas/Oklahoma, including concentrations of forty-two additional elements

    SciTech Connect

    Morgan, T.L.

    1980-08-01

    Totals of 1583 water samples and 503 sediment samples were collected from 2028 locations within the 20 000-km/sup 2/ area of the quadrangle at an average density of one location per 9.86 km/sup 2/. Water samples were collected from wells, springs, and streams and were analyzed for uranium. Sediment samples were collected from streams and springs and were analyzed for uranium, thorium, and 41 additional elements. All field and analytical data are listed in the appendixes of this report. Discussion is limited to anomalous samples, which are considered to be those containing over 20 ppB uranium for waters and over 5 ppM uranium for sediments. Uranium concentrations in water samples range from below the detection limit of 0.2 ppB to 1457.65 ppB and average 7.41 ppB. Most of the seventy anomalous water samples (4.4% of all water samples) are grouped spatially into five clusters or areas of interest. Samples in three of the clusters were collected along the north edge of the quadrangle where Mesozoic strata are exposed. The other two clusters are from the central and southern portions where the Quaternary Ogallala formation is exposed. Sediment samples from the quadrangle have uranium concentrations that range from 0.90 ppM to 27.20 ppM and average 3.27 ppM. Fourteen samples (2.8% of all sediment samples) contain over 5 ppM uranium and are considered anomalous. The five samples with the highest concentrations occur where downcutting streams expose Cretaceous units beneath the Quaternary surficial deposits. The remaining anomalous sediment samples were collected from scattered locations and do not indicate any single formation or unit as a potential source for the anomalous concentrations.

  12. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    SciTech Connect

    Broxton, D.E.; Beyth, M.

    1980-07-01

    Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  13. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Ashton NTMS quadrangle, Idaho/Montana/Wyoming, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr; Sandoval, W.F.; Gallimore, D.L.; Hansel, J.M.; Hensley, W.K.; Pirtle, J.; Macdonell, C.J.

    1980-08-01

    This report contains data collected during a geochemical survey for uranium in the Ashton National Topographic Map Series quadrangle of eastern Idaho, southwestern Montana, and northwestern Wyoming by the Los Alamos Scientific Laboratory (LASL) as part of the nationwide Hydrogeochemical and Stream Sediment Reconnaissance (HSSR). The LASL is responsible for conducting the HSSR primarily in the Rocky Mountain states of New Mexico, Colorado, Wyoming, and Montana and in Alaska. Totals of 1141 water and 1500 sediment samples were collected from 1539 locations in the quadrangle by a commercial contractor. Water samples were collected at streams, springs, wells, ponds, and marshes; sediment samples were obtained from streams, springs, and ponds. Histograms and statistical data for uranium concentrations in water and sediment samples and thorium concentrations in sediment samples are given. Uranium/thorium ratios for sediment samples are also included. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 ppB uranium were reanalyzed by delayed-neutron counting (DNC). Sediments were analyzed for uranium and thorium as well as aluminum, antimony, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, and zinc. All sediments were analyzed for uranium by DNC. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 9 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  14. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Lewistown NTMS Quadrangle, Montana, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-08-01

    Totals of 758 water and 1170 sediment samples were collected from 1649 locations in the Levistown quadrangle. Water samples were collected at streams, springs, wells, ponds, and marshes; sediment samples were obtained from streams, springs, and ponds. Histograms and statistical data for uranium concentrations in water and sediment samples and thorium concentrations in sediment samples are given. All samples were collected at the nominal reconnaissance density of one sample location per 10 km/sup 2/. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters and for sediments. Uranium to thorium (U/Th) ratios for sediment samples are included. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 ppB U were reanalyzed by delayed-neutron counting. Sediments were analyzed for U and Th as well as Al, Sb, Ba, Be, Bi, Cd, Ca, Ce, Cs, Cl, Cr, Co, Cu, Dy, Eu, Au, Hf, Fe, La, Pb, Li, Lu, Mg, Mn, Ni, Nb, K, Rb, Sa, Sc, Ag, Na, Sr, Ta, Tb, Sn, Ti, W, V, Yb, and Zn. All sediments were analyzed for U by delayed neutron counting. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 9 elements, and by arc-source emission spectrography for 2 elements. Analytical results are reported as parts per million. Descriptions of procedures used for analysis of water and sediments samples as well as analytical precisions and detection limits are given.

  15. Industrial Sites Work Plan for Leachfield Corrective Action Units: Nevada Test Site and Tonopah Test Range, Nevada (including Record of Technical Change Nos. 1, 2, 3, and 4)

    SciTech Connect

    DOE /NV

    1998-12-18

    This Leachfield Corrective Action Units (CAUs) Work Plan has been developed in accordance with the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the U.S. Department of Energy, Nevada Operations Office (DOE/NV); the State of Nevada Division of Environmental Protection (NDEP); and the U.S. Department of Defense (FFACO, 1996). Under the FFACO, a work plan is an optional planning document that provides information for a CAU or group of CAUs where significant commonality exists. A work plan may be developed that can be referenced by leachfield Corrective Action Investigation Plans (CAIPs) to eliminate redundant CAU documentation. This Work Plan includes FFACO-required management, technical, quality assurance (QA), health and safety, public involvement, field sampling, and waste management documentation common to several CAUs with similar site histories and characteristics, namely the leachfield systems at the Nevada Test Site (NTS) and the Tonopah Test Range (TT R). For each CAU, a CAIP will be prepared to present detailed, site-specific information regarding contaminants of potential concern (COPCs), sampling locations, and investigation methods.

  16. Central additive effect of Ginkgo biloba and Rhodiola rosea on psychomotor vigilance task and short-term working memory accuracy

    PubMed Central

    Al-Kuraishy, Hayder M.

    2016-01-01

    Aim: The present study investigates the effect of combined treatment with Ginkgo biloba and/or Rhodiola rosea on psychomotor vigilance task (PVT) and short-term working memory accuracy. Subjects and Methods: A total number of 112 volunteers were enrolled to study the effect of G. biloba and R. rosea on PVT and short-term working memory accuracy as compared to placebo effects, the central cognitive effect was assessed by critical flicker-fusion frequency, PVT, and computerized N-back test. Results: Placebo produced no significant effects on all neurocognitive tests measure P > 0.05 in normal healthy volunteers, G. biloba or R. rosea improve PVT and low to moderate working memory accuracy, The combined effect of R. rosea and G. biloba leading to more significant effect on PVT, all levels of short-term working memory accuracy and critical fusion versus flicker P < 0.01, more than of G. biloba or R. rosea when they used alone. Conclusion: The combined effect of R. rosea and G. biloba leading to a more significant effect on cognitive function than either G. biloba or R. rosea when they used alone. PMID:27069717

  17. Stimulus modality and working memory performance in Greek children with reading disabilities: additional evidence for the pictorial superiority hypothesis.

    PubMed

    Constantinidou, Fofi; Evripidou, Christiana

    2012-01-01

    This study investigated the effects of stimulus presentation modality on working memory performance in children with reading disabilities (RD) and in typically developing children (TDC), all native speakers of Greek. It was hypothesized that the visual presentation of common objects would result in improved learning and recall performance as compared to the auditory presentation of stimuli. Twenty children, ages 10-12, diagnosed with RD were matched to 20 TDC age peers. The experimental tasks implemented a multitrial verbal learning paradigm incorporating three modalities: auditory, visual, and auditory plus visual. Significant group differences were noted on language, verbal and nonverbal memory, and measures of executive abilities. A mixed-model MANOVA indicated that children with RD had a slower learning curve and recalled fewer words than TDC across experimental modalities. Both groups of participants benefited from the visual presentation of objects; however, children with RD showed the greatest gains during this condition. In conclusion, working memory for common verbal items is impaired in children with RD; however, performance can be facilitated, and learning efficiency maximized, when information is presented visually. The results provide further evidence for the pictorial superiority hypothesis and the theory that pictorial presentation of verbal stimuli is adequate for dual coding. PMID:21942734

  18. The influence of Ag+Mg additions on the nucleation of strengthening precipitates in a non-cold-worked Al-Cu-Li alloy

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Aluminum-copper-lithium alloys generally require cold work to attain their highest strengths in artificially aged tempers. These alloys are usually strengthened by a combination of the metastable delta prime (Al3Li) and theta prime (Al2Cu) phases and the equilibrium T sub 1 (Al2CuLi) phase, and where the T sub 1 phase is a more potent strengthener than the delta prime. Various investigators have shown that the high strengths obtained after artificial aging associated with cold work result from the heterogeneous precipitation of T sub 1 on matrix dislocations. The objective here is to elucidate the mechanism by which the Ag+Mg additions stimulate the precipitation of T sub 1 type precipitates without cold work. To accomplish this, the microstructure of an Al-6.3Cu-1.3Li-0.14Zr model alloy was evaluated in a T6 type temper with and without the Ag+Mg addition.

  19. [A need to implement new tools for diagnosing tobacco-addition syndrome and readiness/motivation to quit smoking in the working-age population in Poland].

    PubMed

    Broszkiewicz, Marzenna; Drygas, Wojciech

    2016-01-01

    High rates of tobacco use is still observed in working-age population in Poland. The present level of the state tobacco control has been achieved through adopting legal regulations and population-based interventions. In Poland a sufficient contribution of health professionals to the diagnosis of the tobacco-addition syndrome (TAS) and the application of the 5A's (ask, advice, assess, assist, arrange follow-up) brief intervention, has not been confirmed by explicit research results. Systemic solutions of the health care system of the professional control, specialist health care, health professional trainings and reference centres have not as yet been elaborated. The tools for diagnosing tobacco dependence and motivation to quit smoking, developed over 30 years ago and recommended by experts to be used in clinical and research practice, have not met the current addiction criteria. In this paper other tools than those previously recommended - tests developed in the first decade of the 21st century (including Cigarette Dependence Scale and Nicotine Dependence Syndrome Scale), reflecting modern concepts of nicotine dependence are presented. In the literature on the readiness/motivation to change health behaviors, a new approach dominates. The motivational interviewing (MI) by Miller and Rollnick concentrates on a smoking person and his or her internal motivation. Motivational interviewing is recommended by the World Health Organization as a 5R's (relevance, risks, rewards, roadblocks, repetition) brief motivational advice, addressed to tobacco users who are unwilling to make a quit attempt. In Poland new research studies on the implementation of new diagnostic tools and updating of binding guidelines should be undertaken, to strengthen primary health care in treating tobacco dependence, and to incorporate MI and 5R's into trainings in TAS diagnosing and treating addressed to health professionals. PMID:27044722

  20. International Congress on Universal Availability of Publications (Paris, France, May 3-7, 1982). Main Working Document. Including Annotated Programme and Summary.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    An annotated conference program, a narrative summary of the main document, and a detailed list of items and recommendations for conference consideration comprise this working document for the 1982 International Congress on Universal Availability of Publications (UAP). An introductory presentation outlines the structure of the Congress and defines…

  1. Curriculum Guide for Parent Education Programs (Including Special Sections for Rural Parents, Single Parents, Working Parents, and High Risk Parents). Columbia Basin College Parent Education Program.

    ERIC Educational Resources Information Center

    Hare, Jo Ann; And Others

    This curriculum for parent education through cooperative preschools has a sequential approach, with topics developed for parents with different age children enrolled in the various laboratory settings. Introductory materials include the goals and objectives for community college parent cooperative programs, methods of presentation, and a…

  2. Feasibility and Satisfaction with a Tailored Web-based Audit Intervention for Recalibrating Radiologists’ Thresholds for Conducting Additional Work-up

    PubMed Central

    Carney, Patricia A.; Geller, Berta M.; Sickles, Edward A.; Miglioretti, Diana L.; Aiello Bowles, Erin J.; Abraham, Linn; Feig, Stephen A.; Brown, David; Cook, Andrea J.; Yankaskas, Bonnie C.; Elmore, Joann G.

    2010-01-01

    Purpose To examine the feasibility of and satisfaction with a tailored web-based intervention designed to decrease radiologists' recommendation of inappropriate additional work-up following a screening mammogram. Methods We developed a web-based educational intervention designed to reduce inappropriate recall. Radiologists were randomly assigned to participate in an early intervention group or a late (control) intervention group, the latter of which served as a control for a nine-month follow-up period, after which they were invited to participate in the intervention. Intervention content was derived from our prior research and included three modules: 1) an introduction to audit statistics for mammography performance; 2) a review of data showing radiologists' inflated perceptions of medical malpractice risks related to breast imaging, and 3) a review of data on breast cancer risk among women seen in their practices. Embedded within the intervention were individualized audit data for each participating radiologists obtained from the national Breast Cancer Surveillance Consortium. Results Seventy-four radiologists (37.8%; 74/196) consented to the intervention, which was completed by 67.5% (27/40) of those randomized to the early intervention group and 41.2% (14/34) of those randomized to the late (control) group. Thus, a total of 41 (55%) completed the intervention. On average, three log-ins were used to complete the program (range 1–14), which took approximately 1 hour. Ninety-five percent found the program moderately to very helpful in understanding how to calculate basic performance measures. Ninety-three percent found viewing their own performance measures moderately to very helpful, and 83% reported it being moderately to very important to learn that the breast cancer risk in their screening population program was lower than perceived. The percentage of radiologists who reported that the risk of medical malpractice influences their recall rates dropped from 36

  3. Measurement of toverline{t} production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √{s} = 8 {TeV}

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; de Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; van de Klundert, M.; van Haevermaet, H.; van Mechelen, P.; van Remortel, N.; van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; de Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; van Doninck, W.; van Mulders, P.; van Onsem, G. P.; van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; de Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-Conde, A.; Reis, T.; Seva, T.; Vander Velde, C.; Yonamine, R.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Adler, V.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; McCartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Strobbe, N.; Tytgat, M.; van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Júnior, W. L. Aldá; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; da Costa, E. M.; de Jesus Damiao, D.; de Oliveira Martins, C.; Fonseca de Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; de Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; El Sawy, M.; El-Khateeb, E.; Elkafrawy, T.; Mohamed, A.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.

    2016-07-01

    Jet multiplicity distributions in top quark pair ({t}{overline{t}}) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 {fb}^ {-1}. The measurement is performed in the dilepton decay channels (e^+e^-, μ^+ μ^-, and e^{±} μ^{∓}). The absolute and normalized differential cross sections for {t}overline{t} production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential {t overline{t} b} and {t overline{t} b overline{b}} cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. The data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading order calculation.

  4. Measurement of $\\mathrm{ t \\bar{t} } $ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $\\sqrt{s} =$ 8 TeV

    SciTech Connect

    Khachatryan, Vardan

    2015-10-13

    Jet multiplicity distributions in top quark pair (tt) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-+μ- and e±μ). Furthermore, the absolute and normalized differential cross sections for tt production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-b and tt-bb- cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.

  5. Measurement of $$\\mathrm{ t \\bar{t} } $$ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $$\\sqrt{s} =$$ 8 TeV

    DOE PAGESBeta

    Khachatryan, Vardan

    2016-07-07

    Jet multiplicity distributions in top quark pair (tt) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-,μ+μ- and e±μ∓). Furthermore, the absolute and normalized differential cross sections for tt production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-b and tt-bb- cross sections are presented formore » the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.« less

  6. Working Group 7 Summary

    SciTech Connect

    Nagaitsev S.; Berg J.

    2012-06-10

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  7. {sup 13}C chemical shift anisotropies for carbonate ions in cement minerals and the use of {sup 13}C, {sup 27}Al and {sup 29}Si MAS NMR in studies of Portland cement including limestone additions

    SciTech Connect

    Sevelsted, Tine F.; Herfort, Duncan

    2013-10-15

    {sup 13}C isotropic chemical shifts and chemical shift anisotropy parameters have been determined for a number of inorganic carbonates relevant in cement chemistry from slow-speed {sup 13}C MAS or {sup 13}C({sup 1}H) CP/MAS NMR spectra (9.4 T or 14.1 T) for {sup 13}C in natural abundance. The variation in the {sup 13}C chemical shift parameters is relatively small, raising some doubts that different carbonate species in Portland cement-based materials may not be sufficiently resolved in {sup 13}C MAS NMR spectra. However, it is shown that by combining {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR carbonate anions in anhydrous and hydrated phases can be distinguished, thereby providing valuable information about the reactivity of limestone in cement blends. This is illustrated for three cement pastes prepared from an ordinary Portland cement, including 0, 16, and 25 wt.% limestone, and following the hydration for up to one year. For these blends {sup 29}Si MAS NMR reveals that the limestone filler accelerates the hydration for alite and also results in a smaller fraction of tetrahedrally coordinated Al incorporated in the C-S-H phase. The latter result is more clearly observed in {sup 27}Al MAS NMR spectra of the cement–limestone blends and suggests that dissolved aluminate species in the cement–limestone blends readily react with carbonate ions from the limestone filler, forming calcium monocarboaluminate hydrate. -- Highlights: •{sup 13}C chemical shift anisotropies for inorganic carbonates from {sup 13}C MAS NMR. •Narrow {sup 13}C NMR chemical shift range (163–171 ppm) for inorganic carbonates. •Anhydrous and hydrated carbonate species by {sup 13}C MAS and {sup 13}C({sup 1}H) CP/MAS NMR. •Limestone accelerates the hydration for alite in Portland – limestone cements. •Limestone reduces the amount of aluminium incorporated in the C-S-H phase.

  8. Review of ASME code criteria for control of primary loads on nuclear piping system branch connections and recommendations for additional development work

    SciTech Connect

    Rodabaugh, E.C.; Gwaltney, R.C.; Moore, S.E.

    1993-11-01

    This report collects and uses available data to reexamine the criteria for controlling primary loads in nuclear piping branch connections as expressed in Section III of the ASME Boiler and Pressure Vessel Code. In particular, the primary load stress indices given in NB-3650 and NB-3683 are reexamined. The report concludes that the present usage of the stress indices in the criteria equations should be continued. However, the complex treatment of combined branch and run moments is not supported by available information. Therefore, it is recommended that this combined loading evaluation procedure be replaced for primary loads by the separate leg evaluation procedure specified in NC/ND-3653.3(c) and NC/ND-3653.3(d). No recommendation is made for fatigue or secondary load evaluations for Class 1 piping. Further work should be done on the development of better criteria for treatment of combined branch and run moment effects.

  9. Optical modulator including grapene

    DOEpatents

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  10. OAST Space Theme Workshop. Volume 3: Working group summary. 9: Aerothermodynamics (M-3). A: Statement. B: Technology needs (form 1). C. Priority assessment (form 2). D. Additional assessments

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Twelve aerothermodynamic space technology needs were identified to reduce the design uncertainties in aerodynamic heating and forces experienced by heavy lift launch vehicles, orbit transfer vehicles, and advanced single stage to orbit vehicles for the space transportation system, and for probes, planetary surface landers, and sample return vehicles for solar system exploration vehicles. Research and technology needs identified include: (1) increasing the fluid dynamics capability by at least two orders of magnitude by developing an advanced computer processor for the solution of fluid dynamic problems with improved software; (2) predicting multi-engine base flow fields for launch vehicles; and (3) developing methods to conserve energy in aerothermodynamic ground test facilities.

  11. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  12. Solving the Big Data (BD) Problem in Advanced Manufacturing (Subcategory for work done at Georgia Tech. Study Process and Design Factors for Additive Manufacturing Improvement)

    SciTech Connect

    Clark, Brett W.; Diaz, Kimberly A.; Ochiobi, Chinaza Darlene; Paynabar, Kamran

    2015-09-01

    3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.

  13. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  14. Rationale, design and methods of the Study of Work and Pain (SWAP): a cluster randomised controlled trial testing the addition of a vocational advice service to best current primary care for patients with musculoskeletal pain (ISRCTN 52269669)

    PubMed Central

    2014-01-01

    Background Musculoskeletal pain is a major contributor to short and long term work absence. Patients seek care from their general practitioner (GP) and yet GPs often feel ill-equipped to deal with work issues. Providing a vocational case management service in primary care, to support patients with musculoskeletal problems to remain at or return to work, is one potential solution but requires robust evaluation to test clinical and cost-effectiveness. Methods/Design This protocol describes a cluster randomised controlled trial, with linked qualitative interviews, to investigate the effect of introducing a vocational advice service into general practice, to provide a structured approach to managing work related issues in primary care patients with musculoskeletal pain who are absent from work or struggling to remain in work. General practices (n = 6) will be randomised to offer best current care or best current care plus a vocational advice service. Adults of working age who are absent from or struggling to remain in work due to a musculoskeletal pain problem will be invited to participate and 330 participants will be recruited. Data collection will be through patient completed questionnaires at baseline, 4 and 12 months. The primary outcome is self-reported work absence at 4 months. Incremental cost-utility analysis will be undertaken to calculate the cost per additional QALY gained and incremental net benefits. A linked interview study will explore the experiences of the vocational advice service from the perspectives of GPs, nurse practitioners (NPs), patients and vocational advisors. Discussion This paper presents the rationale, design, and methods of the Study of Work And Pain (SWAP) trial. The results of this trial will provide evidence to inform primary care practice and guide the development of services to provide support for musculoskeletal pain patients with work-related issues. Trial registration Current Controlled Trials ISRCTN52269669. PMID:25012813

  15. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  16. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  17. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  18. 34 CFR 303.15 - Include; including.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Include; including. 303.15 Section 303.15 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS...

  19. Higher Education Amendments of 1998. Report of the Committee on Education and the Workforce. House of Representatives on H.R. 6, Together with Additional and Dissenting Views (Including Cost Estimate of the Congressional Budget Office). House of Representatives, 105th Congress, 2d Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Committee on Education and the Workforce.

    This volume presents the report of the Committee on Education and the Workforce regarding the Higher Education Amendments of 1998, including additional and dissenting views. The report, which features both the text of the amendments and the Committee's review of them, covers the following sections of the proposed legislation (H.R. 6), set to go…

  20. [Multivariate analysis on the relationship between subjective symptoms and risk factors for the development of symptoms including working conditions, life habits and physical status in forestry workers using chain saw].

    PubMed

    Nagase, H; Nakamura, H; Nakamura, H; Nohara, S; Miura, K; Ohnishi, T

    1992-11-01

    To determine the risk factors of the subjective symptoms experienced by chain saw workers, we surveyed 206 forestry workers using this device in their work. The strength of the relationship between their symptoms and such potential risk factors as occupational, behavioral, and physical factors was evaluated by a multiple logistic regression model. It was found that many years of chain saw operation, and numerous hours of chain saw operation per day, increased the risk of white finger, numbness of hands and arms, chillness of hands and arms and difficulty in joint movement, indicating that these symptoms were closely related to vibration exposure. Many years of forestry work before chain saw work also increased the risk of joint pain, suggesting that bone and joint disorders are related to heavy manual work not using a chain saw. A second job involving manual labor increased the risk of weakness in the arms, stiffness of the shoulders, and lumbago. Infrequent bathing was associated with increased risk of pain in hands and arms and lumbago. Older workers had a higher prevalence of stomach discomfort. No risk factor was found to significantly increase the risk of easy fatigability, forgetfulness and sleep disorder. It was found that not only exposure to vibration but also other factors contributed to the prevalence of pain in hands and arms, joint pain, weakness in arms, stiffness of shoulder, and lumbago. Second job and infrequent bathing appeared to be related to the occurrence of certain subjective symptoms. These contributory factors should be taken into account when evaluating subjective symptoms encountered in field studies of forestry workers. PMID:1334168

  1. English as an Additional Language: Changing Perspectives.

    ERIC Educational Resources Information Center

    Leung, Constant, Ed.; Cable, Carrie, Ed.

    This volume highlights the language and learning needs of pupils with English as an additional language in the United Kingdom. It includes chapters by British teachers and researchers working in this field. The book addresses a number of issues of interest to practitioners, scholars, teacher educators, and policy makers. Each chapter is prefaced…

  2. CNS infections in patients with hematological disorders (including allogeneic stem-cell transplantation)—Guidelines of the Infectious Diseases Working Party (AGIHO) of the German Society of Hematology and Medical Oncology (DGHO)

    PubMed Central

    Schmidt-Hieber, M.; Silling, G.; Schalk, E.; Heinz, W.; Panse, J.; Penack, O.; Christopeit, M.; Buchheidt, D.; Meyding-Lamadé, U.; Hähnel, S.; Wolf, H. H.; Ruhnke, M.; Schwartz, S.; Maschmeyer, G.

    2016-01-01

    Infections of the central nervous system (CNS) are infrequently diagnosed in immunocompetent patients, but they do occur in a significant proportion of patients with hematological disorders. In particular, patients undergoing allogeneic hematopoietic stem-cell transplantation carry a high risk for CNS infections of up to 15%. Fungi and Toxoplasma gondii are the predominant causative agents. The diagnosis of CNS infections is based on neuroimaging, cerebrospinal fluid examination and biopsy of suspicious lesions in selected patients. However, identification of CNS infections in immunocompromised patients could represent a major challenge since metabolic disturbances, side-effects of antineoplastic or immunosuppressive drugs and CNS involvement of the underlying hematological disorder may mimic symptoms of a CNS infection. The prognosis of CNS infections is generally poor in these patients, albeit the introduction of novel substances (e.g. voriconazole) has improved the outcome in distinct patient subgroups. This guideline has been developed by the Infectious Diseases Working Party (AGIHO) of the German Society of Hematology and Medical Oncology (DGHO) with the contribution of a panel of 14 experts certified in internal medicine, hematology/oncology, infectious diseases, intensive care, neurology and neuroradiology. Grades of recommendation and levels of evidence were categorized by using novel criteria, as recently published by the European Society of Clinical Microbiology and Infectious Diseases. PMID:27052648

  3. CNS infections in patients with hematological disorders (including allogeneic stem-cell transplantation)-Guidelines of the Infectious Diseases Working Party (AGIHO) of the German Society of Hematology and Medical Oncology (DGHO).

    PubMed

    Schmidt-Hieber, M; Silling, G; Schalk, E; Heinz, W; Panse, J; Penack, O; Christopeit, M; Buchheidt, D; Meyding-Lamadé, U; Hähnel, S; Wolf, H H; Ruhnke, M; Schwartz, S; Maschmeyer, G

    2016-07-01

    Infections of the central nervous system (CNS) are infrequently diagnosed in immunocompetent patients, but they do occur in a significant proportion of patients with hematological disorders. In particular, patients undergoing allogeneic hematopoietic stem-cell transplantation carry a high risk for CNS infections of up to 15%. Fungi and Toxoplasma gondii are the predominant causative agents. The diagnosis of CNS infections is based on neuroimaging, cerebrospinal fluid examination and biopsy of suspicious lesions in selected patients. However, identification of CNS infections in immunocompromised patients could represent a major challenge since metabolic disturbances, side-effects of antineoplastic or immunosuppressive drugs and CNS involvement of the underlying hematological disorder may mimic symptoms of a CNS infection. The prognosis of CNS infections is generally poor in these patients, albeit the introduction of novel substances (e.g. voriconazole) has improved the outcome in distinct patient subgroups. This guideline has been developed by the Infectious Diseases Working Party (AGIHO) of the German Society of Hematology and Medical Oncology (DGHO) with the contribution of a panel of 14 experts certified in internal medicine, hematology/oncology, infectious diseases, intensive care, neurology and neuroradiology. Grades of recommendation and levels of evidence were categorized by using novel criteria, as recently published by the European Society of Clinical Microbiology and Infectious Diseases. PMID:27052648

  4. Cognitive Achievement and Motivation in Hands-on and Teacher-Centred Science Classes: Does an additional hands-on consolidation phase (concept mapping) optimise cognitive learning at work stations?

    NASA Astrophysics Data System (ADS)

    Gerstner, Sabine; Bogner, Franz X.

    2010-05-01

    Our study monitored the cognitive and motivational effects within different educational instruction schemes: On the one hand, teacher-centred versus hands-on instruction; on the other hand, hands-on instruction with and without a knowledge consolidation phase (concept mapping). All the instructions dealt with the same content. For all participants, the hands-on approach as well as the concept mapping adaptation were totally new. Our hands-on approach followed instruction based on "learning at work stations". A total of 397 high-achieving fifth graders participated in our study. We used a pre-test, post-test, retention test design both to detect students' short-term learning success and long-term learning success, and to document their decrease rates of newly acquired knowledge. Additionally, we monitored intrinsic motivation. Although the teacher-centred approach provided higher short-term learning success, hands-on instruction resulted in relatively lower decrease rates. However, after six weeks, all students reached similar levels of newly acquired knowledge. Nevertheless, concept mapping as a knowledge consolidation phase positively affected short-term increase in knowledge. Regularly placed in instruction, it might increase long-term retention rates. Scores of interest, perceived competence and perceived choice were very high in all the instructional schemes.

  5. Pump apparatus including deconsolidator

    DOEpatents

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  6. BE PROACTIVE: "Including Students With Challenging Behavior in Your Classroom"

    ERIC Educational Resources Information Center

    Mitchem, Katherine J.

    2005-01-01

    Many teachers feel unprepared to deal with disruptive behavior and believe this substantially interferes with their teaching and their ability to successfully include children with disabilities (Schumm & Vaughn, 1995). In addition to the stress of dealing with never-ending piles of paperwork, working with challenging students may be one of the…

  7. Working Knowledge.

    ERIC Educational Resources Information Center

    Beckett, David

    The resurgence of "lifelong learning" has renewed consideration of the nature of "working knowledge." Lifelong learning has many aspects, including construction and distribution of individuals' very self-hood, educational institutions' role in capturing informal experiences, and the juggling required between family and work-based responsibilities.…

  8. Study of electrochemically active carbon, Ga2O3 and Bi2O3 as negative additives for valve-regulated lead-acid batteries working under high-rate, partial-state-of-charge conditions

    NASA Astrophysics Data System (ADS)

    Zhao, Li; Chen, Baishuang; Wu, Jinzhu; Wang, Dianlong

    2014-02-01

    Electrochemically active carbon (EAC), Gallium (III) oxide (Ga2O3) and Bismuth (III) oxide (Bi2O3) are used as the negative additives of valve-regulated lead-acid (VRLA) batteries to prolong the cycle life of VRLA batteries under high-rate partial-state-of-charge (HRPSoC) conditions, and their effects on the cycle life of VRLA batteries are investigated. It is found that the addition of EAC in negative active material can restrain the sulfation of the negative plates and prolong the cycle performance of VRLA batteries under HRPSoC conditions. It is also observed that the addition of Ga2O3 or Bi2O3 in EAC can effectively increase the overpotential of hydrogen evolution on EAC electrodes, and decrease the evolution rate of hydrogen. An appropriate addition amount of Ga2O3 or Bi2O3 in the negative plates of VRLA batteries can decrease the cut-off charging voltage, increase the cut-off discharging voltage, and prolong the cycle life of VRLA batteries under HRPSoC conditions. The battery added with 0.5% EAC and 0.01% Ga2O3 in negative active material shows a lowest cut-off charging voltage and a highest cut-off discharging voltage under HRPSoC conditions, and its' cycle life reaches about 8100 cycles which is at least three times longer than that without Ga2O3.

  9. Decent Work: A Psychological Perspective

    PubMed Central

    Blustein, David L.; Olle, Chad; Connors-Kellgren, Alice; Diamonti, A. J.

    2016-01-01

    This contribution, which serves as the lead article for the Research Topic entitled “From Meaning of Working to Meaningful Lives: The Challenges of Expanding Decent Work,” explores current challenges in the development and operationalization of decent work. Based on an initiative from the International Labor Organization [ILO] (1999) decent work represents an aspirational statement about the quality of work that should be available to all people who seek to work around the globe. Within recent years, several critiques have been raised about decent work from various disciplines, highlighting concerns about a retreat from the social justice ethos that had initially defined the concept. In addition, other scholars have observed that decent work has not included a focus on the role of meaning and purpose at work. To address these concerns, we propose that a psychological perspective can help to revitalize the decent work agenda by infusing a more specific focus on individual experiences and by reconnecting decent work to its social justice origins. As an illustration of the advantages of a psychological perspective, we explore the rise of precarious work and also connect the decent work agenda to the Psychology-of-Working Framework and Theory (Blustein, 2006; Duffy et al., 2016). PMID:27047430

  10. [Wet work].

    PubMed

    Kieć-Swierczyńska, Marta; Chomiczewska, Dorota; Krecisz, Beata

    2010-01-01

    Wet work is one of the most important risk factors of occupational skin diseases. Exposure of hands to the wet environment for more than 2 hours daily, wearing moisture-proof protective gloves for a corresponding period of time or necessity to wash hands frequently lead to the disruption of epidermal stratum corneum, damage to skin barrier function and induction of irritant contact dermatitis. It may also promote penetration of allergens into the skin and increase the risk of sensitization to occupational allergens. Exposure to wet work plays a significant role in occupations, such as hairdressers and barbers, nurses and other health care workers, cleaning staff, food handlers and metalworkers. It is more common among women because many occupations involving wet work are female-dominated. The incidence of wet-work-induced occupational skin diseases can be reduced by taking appropriate preventive measures. These include identification of high-risk groups, education of workers, organization of work enabling to minimize the exposure to wet work, use of personal protective equipment and skin care after work. PMID:20437890

  11. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  12. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  13. Neoclassical Transport Including Collisional Nonlinearity

    SciTech Connect

    Candy, J.; Belli, E. A.

    2011-06-10

    In the standard {delta}f theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction {delta}f is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlueter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  14. Families classification including multiopposition asteroids

    NASA Astrophysics Data System (ADS)

    Milani, Andrea; Spoto, Federica; Knežević, Zoran; Novaković, Bojan; Tsirvoulis, Georgios

    2016-01-01

    In this paper we present the results of our new classification of asteroid families, upgraded by using catalog with > 500,000 asteroids. We discuss the outcome of the most recent update of the family list and of their membership. We found enough evidence to perform 9 mergers of the previously independent families. By introducing an improved method of estimation of the expected family growth in the less populous regions (e.g. at high inclination) we were able to reliably decide on rejection of one tiny group as a probable statistical fluke. Thus we reduced our current list to 115 families. We also present newly determined ages for 6 families, including complex 135 and 221, improving also our understanding of the dynamical vs. collisional families relationship. We conclude with some recommendations for the future work and for the family name problem.

  15. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  16. Work Out at Work

    MedlinePlus

    ... exercise into your busy work day. Find 10-minute workout breaks throughout the day. There are a variety of strength, balance, and flexibility exercises you can do right at your desk. The Go4Life website has easy-to-follow directions for all of ...

  17. Working Group Report: Sensors

    SciTech Connect

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  18. Employment, Training, and Literacy Enhancement Act of 1997. Report of the Committee on Education and the Workforce, House of Representatives, on H.R. 1385 Together with Additional and Dissenting Views [Including Cost Estimate of the Congressional Budget Office], 105th Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Committee on Education and the Workforce.

    This document contains the text of the Employment, Training, and Literacy Enhancement Act of 1997, as amended by committee, including the titles that cover the following: general provisions; employment and training programs for disadvantaged youth; federally administered programs; adult education programs; miscellaneous provisions; the State Human…

  19. Evaluating Three Different Methods of Determining Addition in Presbyopia

    PubMed Central

    Yazdani, Negareh; Khorasani, Abbas Azimi; Moghadam, Hanieh Mirhajian; Yekta, Abbas Ali; Ostadimoghaddam, Hadi; Shandiz, Javad Heravian

    2016-01-01

    Purpose: To compare three different methods for determining addition in presbyopes. Methods: The study included 81 subjects with presbyopia who aged 40-70 years. Reading addition values were measured using 3 approaches including the amplitude of accommodation (AA), dynamic retinoscopy (DR), and increasing plus lens (IPL). Results: IPL overestimated reading addition relative to other methods. Mean near addition obtained by AA, DR and IPL were 1.31, 1.68 and 1.77, respectively. Our results showed that IPL method could provide 20/20 vision at near in the majority of presbyopic subjects (63.4%). Conclusion: The results were approximately the same for 3 methods and provided comparable final addition; however, mean near additions were higher with increasing plus lens compared with the other two methods. In presbyopic individuals, increasing plus lens is recommended as the least time-consuming method with the range of ±0.50 diopter at the 40 cm working distance. PMID:27621785

  20. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  1. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  2. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects. PMID:24772784

  3. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  4. Relationships between Social Work Involvement and Hospice Outcomes: Results of the National Hospice Social Work Survey

    ERIC Educational Resources Information Center

    Reese, Dona J.; Raymer, Mary

    2004-01-01

    In a struggle to balance fiscal realities with hospice philosophy, some hospices have attempted to cut costs by reducing social work involvement. This cross-sectional survey of 66 hospices found, however, increased social work involvement was significantly associated with lower hospice costs. Additional benefits included better team functioning,…

  5. Art to Bring About Change: The Work of Tyree Guyton

    ERIC Educational Resources Information Center

    Buffington, Melanie L.

    2007-01-01

    Public art takes many forms, including commemorative sculptures, site-specific works, and collaborative murals. Additionally, public art can beautify an urban environment or raise awareness of social issues. Public works of art are a form of discourse and open conversations and dialogue, helping communities work toward unity and empowerment. Using…

  6. 28 CFR 345.65 - Inmate medical work limitation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Inmate medical work limitation. 345.65... PRISON INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.65 Inmate medical work limitation. In addition to any prior illnesses or injuries, medical limitations also include any illness...

  7. Implications for VocED of Changing Work Arrangements.

    ERIC Educational Resources Information Center

    Hawke, Geof

    The definition of work has undergone a massive transition within the last decade, and this trend has major implications for vocational education. Earlier ideas of work included that it was full-time, permanent, and for life; in addition, work provided opportunities for career development, a clearly-defined employer-worker relationship, and clear…

  8. 28 CFR 345.65 - Inmate medical work limitation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Inmate medical work limitation. 345.65... PRISON INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.65 Inmate medical work limitation. In addition to any prior illnesses or injuries, medical limitations also include any illness...

  9. 28 CFR 345.65 - Inmate medical work limitation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Inmate medical work limitation. 345.65... PRISON INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.65 Inmate medical work limitation. In addition to any prior illnesses or injuries, medical limitations also include any illness...

  10. Additive manufacturing in production: challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  11. Additive usage levels.

    PubMed

    Langlais, R

    1996-01-01

    With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century. PMID:8792135

  12. An additional middle cuneiform?

    PubMed Central

    Brookes-Fazakerley, S.D.; Jackson, G.E.; Platt, S.R.

    2015-01-01

    Additional cuneiform bones of the foot have been described in reference to the medial bipartite cuneiform or as small accessory ossicles. An additional middle cuneiform has not been previously documented. We present the case of a patient with an additional ossicle that has the appearance and location of an additional middle cuneiform. Recognizing such an anatomical anomaly is essential for ruling out second metatarsal base or middle cuneiform fractures and for the preoperative planning of arthrodesis or open reduction and internal fixation procedures in this anatomical location. PMID:26224890

  13. Second Thoughts on Work.

    ERIC Educational Resources Information Center

    Levitan, Sar A.; Johnson, Clifford M.

    This book examines the forces which are changing work in the 1980s and offers a concise analysis of the challenges for social policy which lie ahead. The first of nine chapters looks at changes affecting Americans' concept of work, including expectations, commitment to work, satisfaction, and work reform. Discussion in chapter 2 focuses on…

  14. Carbamate deposit control additives

    SciTech Connect

    Honnen, L.R.; Lewis, R.A.

    1980-11-25

    Deposit control additives for internal combustion engines are provided which maintain cleanliness of intake systems without contributing to combustion chamber deposits. The additives are poly(oxyalkylene) carbamates comprising a hydrocarbyloxyterminated poly(Oxyalkylene) chain of 2-5 carbon oxyalkylene units bonded through an oxycarbonyl group to a nitrogen atom of ethylenediamine.

  15. How the Ear Works

    MedlinePlus

    ... Find an ENT Doctor Near You How the Ear Works How the Ear Works Patient Health Information News media interested in ... public relations staff at newsroom@entnet.org . The ear has three main parts: the outer ear (including ...

  16. Group Work Publication-1991.

    ERIC Educational Resources Information Center

    Zimpfer, David G.

    1992-01-01

    Lists 21 new publications in group work, of which 9 are reviewed. Those discussed include publications on group counseling and psychotherapy, structured groups, support groups, psychodrama, and social group work. (Author/NB)

  17. Food Additives and Hyperkinesis: A Controlled Double-Blind Experiment. (Includes NIE Staff Critique).

    ERIC Educational Resources Information Center

    Conners, C. Keith; And Others

    Fifteen hyperkinetic children (6-12 years old) were involved in a pilot study to test B. Feingold's hypothesis that hyperkinesis may be caused by artificial flavors and colors in food. Prior to treatment, parents and teachers completed bi-weekly questionnaires regarding each Ss' behavior both on medication (pretreatment period) and when medication…

  18. Combustion Module-2 Preparations Completed for SPACEHAB Mission Including the Addition of a New Major Experiment

    NASA Technical Reports Server (NTRS)

    Over, Ann P.

    2001-01-01

    The Combustion Module-1 (CM-1) was a large, state-of-the-art space shuttle Spacelab facility that was designed, built, and operated on STS-83 and STS-94 by a team from the NASA Glenn Research Center composed of civil servants and local support contractors (Analex and Zin Technologies). CM-1 accomplished the incredible task of providing a safe environment to support flammable and toxic gases while providing a suite of diagnostics for science measurements more extensive than any prior shuttle experiment (or anything since). Finally, CM-1 proved that multiple science investigations can be accommodated in one facility, a crucial step for Glenn's Fluids and Combustion Facility developed for the International Space Station. However, the story does not end with CM-1. In 1998, CM-2 was authorized to take the CM-1 accomplishments a big step further by completing three major steps: Converting the entire experiment to operate in a SPACEHAB module. Conducting an extensive hardware refurbishment and upgrading diagnostics (e.g., cameras, gas chromatograph, and numerous sensors). Adding a new, completely different combustion experiment.

  19. Additions to the knowledge of the land snails of Sabah (Malaysia, Borneo), including 48 new species

    PubMed Central

    Vermeulen, Jaap J.; Liew, Thor-Seng; Schilthuizen, Menno

    2015-01-01

    Abstract We present reviews of the Sabah (Malaysia, on the island of Borneo) species of the following problematical genera of land snails (Mollusca, Gastropoda): Acmella and Anaglyphula (Caenogastropoda: Assimineidae); Ditropopsis (Caenogastropoda: Cyclophoridae); Microcystina (Pulmonata: Ariophantidae); Philalanka and Thysanota (Pulmonata: Endodontidae); Kaliella, Rahula, (Pulmonata: Euconulidae); Trochomorpha and Geotrochus (Pulmonata: Trochomorphidae). Next to this, we describe new species in previously revised genera, such as Diplommatina (Diplommatinidae); Georissa (Hydrocenidae); as well as some new species of genera not revised previously, such as Japonia (Cyclophoridae); Durgella and Dyakia (Ariophantidae); Amphidromus, and Trachia (Camaenidae); Paralaoma (Punctidae); Curvella (Subulinidae). All descriptions are based on the morphology of the shells. We distinguish the following 48 new species: Acmella cyrtoglyphe, Acmella umbilicata, Acmella ovoidea, Acmella nana, Acmella subcancellata, Acmella striata, and Anaglyphula sauroderma (Assimineidae); Ditropopsis davisoni, Ditropopsis trachychilus, Ditropopsis constricta, Ditropopsis tyloacron, Ditropopsis cincta, and Japonia anceps (Cyclophoridae); Diplommatina bidentata and Diplommatina tylocheilos (Diplommatinidae); Georissa leucococca and Georissa nephrostoma (Hydrocenidae); Durgella densestriata, Dyakia chlorosoma, Microcystina microrhynchus, Microcystina callifera, Microcystina striatula, Microcystina planiuscula, and Microcystina physotrochus (Ariophantidae); Amphidromus psephos and Trachia serpentinitica (Camaenidae); Philalanka tambunanensis, Philalanka obscura, Philalanka anomphala, Philalanka rugulosa, and Philalanka malimgunung (Endodontidae); Kaliella eurytrochus, Kaliella sublaxa, Kaliella phacomorpha, Kaliella punctata, Kaliella microsoma, Rahula delopleura, (Euconulidae); Paralaoma angusta (Punctidae); Curvella hadrotes (Subulinidae); Trochomorpha trachus, Trochomorpha haptoderma, Trochomorpha thelecoryphe, Geotrochus oedobasis, Geotrochus spilokeiria, Geotrochus scolops, Geotrochus kitteli, Geotrochus subscalaris, and Geotrochus meristorhachis (Trochomorphidae). PMID:26692803

  20. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  1. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  2. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  3. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  4. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  5. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  6. Remedial investigation work plan for Bear Creek Valley Operable Unit 1 (S-3 Ponds, Boneyard/Burnyard, Oil Landfarm, Sanitary Landfill 1, and the Burial Grounds, including Oil Retention Ponds 1 and 2) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

    SciTech Connect

    Not Available

    1993-09-01

    The intent and scope of the work plan are to assemble all data necessary to facilitate selection of remediation alternatives for the sites in Bear Creek Valley Operable Unit 1 (BCV OU 1) such that the risk to human health and the environment is reduced to acceptable levels based on agreements with regulators. The ultimate goal is to develop a final Record Of Decision (ROD) for all of the OUs in BCV, including the integrator OU. However, the initial aim of the source OUs is to develop a ROD for interim measures. For source OUs such as BCV OU 1, data acquisition will not be carried out in a single event, but will be carried out in three stages that accommodate the schedule for developing a ROD for interim measures and the final site-wide ROD. The three stages are as follows: Stage 1, Assemble sufficient data to support decisions such as the need for removal actions, whether to continue with the remedial investigation (RI) process, or whether no further action is required. If the decision is made to continue the RI/FS process, then: Stage 2, Assemble sufficient data to allow for a ROD for interim measures that reduce risks to the human health and the environment. Stage 3, Provide input from the source OU that allows a final ROD to be issued for all OUs in the BCV hydrologic regime. One goal of the RI work plan will be to ensure that sampling operations required for the initial stage are not repeated at later stages. The overall goals of this RI are to define the nature and extent of contamination so that the impact of leachate, surface water runoff, and sediment from the OU I sites on the integrator OU can be evaluated, the risk to human health and the environment can be defined, and the general physical characteristics of the subsurface can be determined such that remedial alternatives can be screened.

  7. Bacteria repelling poly(methylmethacrylate-co-dimethylacrylamide) coatings for biomedical devices† †Electronic supplementary information (ESI) available: Polymer microarray screening, including analysis of bacterial adhesion by fluorescence microscopy and SEM, and chemical composition of bacteria repelling polymers identified in the screen; polymer synthesis and characterisation; preparation of catheter pieces and solvent studies, and details for confocal imaging/analysis. See DOI: 10.1039/c4tb01129e Click here for additional data file.

    PubMed Central

    Venkateswaran, Seshasailam; Wu, Mei; Gwynne, Peter J.; Hardman, Ailsa; Lilienkampf, Annamaria; Pernagallo, Salvatore; Blakely, Garry; Swann, David G.

    2014-01-01

    Nosocomial infections due to bacteria have serious implications on the health and recovery of patients in a variety of medical scenarios. Since bacterial contamination on medical devices contributes to the majority of nosocomical infections, there is a need for redesigning the surfaces of medical devices, such as catheters and tracheal tubes, to resist the binding of bacteria. In this work, polyurethanes and polyacrylates/acrylamides, which resist binding by the major bacterial pathogens underpinning implant-associated infections, were identified using high-throughput polymer microarrays. Subsequently, two ‘hit’ polymers, PA13 (poly(methylmethacrylate-co-dimethylacrylamide)) and PA515 (poly(methoxyethylmethacrylate-co-diethylaminoethylacrylate-co-methylmethacrylate)), were used to coat catheters and substantially shown to decrease binding of a variety of bacteria (including isolates from infected endotracheal tubes and heart valves from intensive care unit patients). Catheters coated with polymer PA13 showed up to 96% reduction in bacteria binding in comparison to uncoated catheters. PMID:25580245

  8. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting. PMID:26118220

  9. Additive Manufacturing of Aerospace Propulsion Components

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  10. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  11. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  12. Riding Third: Social Work in Ambulance Work

    ERIC Educational Resources Information Center

    Campbell, Hilary; Rasmussen, Brian

    2012-01-01

    This research explored the possible role of social work alongside emergency ambulance services. An ethnographic study included semistructured interviews and direct observations collected over 300 hours while riding in ambulances in an urban setting. The data suggest that social work could play a role by providing needed psychosocial care during…

  13. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  14. Good Work.

    ERIC Educational Resources Information Center

    Bjorkquist, David C.

    1991-01-01

    The deterioration of the quality of work and the resulting impact on workers are of increasing concern. Those being prepared for entry into the workplace can also be prepared for the context and condition of work. (SK)

  15. Recent Additions for 1997

    EPA Science Inventory

    December 15, 1997
    Minutes of the Stakeholder Meetings on the Report of the JSA Shrimp Virus Work Group

    November 21, 1997
  16. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  17. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  18. Working Mothers

    MedlinePlus

    ... for their child when child care arrangements have broken down, or to take their child to necessary appointments. When to Return to Work A woman’s decision to return to work must take into account her own needs as well as those of her family. If you are considering returning to work, try ...

  19. Manipulating crystallization with molecular additives.

    PubMed

    Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

    2014-01-01

    Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications. PMID:24579880

  20. NASA Work Experience

    NASA Technical Reports Server (NTRS)

    Frandsen, Athela F.

    2015-01-01

    I have had the opportunity to support the analytical laboratories in chemical analysis of unknown samples, using Optical Microscopy (OM), Polarizing Light Microscopy (PLM), Fourier-Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEMEDS), and X-ray Powder Diffraction (XPD). I have assisted in characterizing fibers pulled from a spacecraft, a white fibrous residue discovered in a jet refueler truck, brown residue from a plant habitat slated for delivery to the ISS (International Space Station), corrosion on a pipe from a sprinkler, and air filtration material brought back from the ISS. I also conducted my own fiber study in order to practice techniques and further my understanding of background concepts. Furthermore, I had the opportunity to participate in diverse work assignments, where I was assigned to work with other branches of the engineering department for 1-2 days each. The first was in the Materials Science branch where I participated in the construction of the plant habitat intended for use in research aboard the ISS. The second was in the Testing Design branch where I assisted with tensile and hardness testing of over 40 samples. In addition, I have had the privilege to attend multiple tours of the NASA KSC campus, including to the Astronaut Crew Quarters, the VAB (the main area, the Columbia room, and the catwalk), the Visitor Center housing the shuttle Atlantis, the Saturn-V exhibit, the Prototype laboratory, SWAMP WORKS, the Shuttle Landing Facility, the Crawler, and the Booster Fabrication Facility (BFF). Lastly, much of my coursework prepared me for this experience, including numerous laboratory courses with topics diverse as chemistry, physics, and biology.

  1. Work of the cosmonaut

    NASA Technical Reports Server (NTRS)

    Demin, L. S.

    1980-01-01

    The necessity for the cosmonaut to receive broad training in many fields in order to carry out his multifaceted work is discussed. The work includes: scientific research, engineering, operator's work, participation in technical commissions and councils, training on simulators, and the study of technology and sports.

  2. Women at Work.

    ERIC Educational Resources Information Center

    Valiant, Sharon

    This resource booklet about working women presents role models of interesting women, past and present, many of whom have been successful in non-traditional work roles. Included are brief biographical sketches of working women in early America, during the industrial revolution, the early twentieth century, the Depression, World War II, and modern…

  3. Boron addition to alloys

    SciTech Connect

    Coad, B. C.

    1985-08-20

    A process for addition of boron to an alloy which involves forming a melt of the alloy and a reactive metal, selected from the group consisting of aluminum, titanium, zirconium and mixtures thereof to the melt, maintaining the resulting reactive mixture in the molten state and reacting the boric oxide with the reactive metal to convert at least a portion of the boric oxide to boron which dissolves in the resulting melt, and to convert at least portion of the reactive metal to the reactive metal oxide, which oxide remains with the resulting melt, and pouring the resulting melt into a gas stream to form a first atomized powder which is subsequently remelted with further addition of boric oxide, re-atomized, and thus reprocessed to convert essentially all the reactive metal to metal oxide to produce a powdered alloy containing specified amounts of boron.

  4. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  5. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  6. [Biologically active food additives].

    PubMed

    Velichko, M A; Shevchenko, V P

    1998-07-01

    More than half out of 40 projects for the medical science development by the year of 2000 have been connected with the bio-active edible additives that are called "the food of XXI century", non-pharmacological means for many diseases. Most of these additives--nutricevtics and parapharmacevtics--are intended for the enrichment of food rations for the sick or healthy people. The ecologicaly safest and most effective are combined domestic adaptogens with immuno-modulating and antioxidating action that give anabolic and stimulating effect,--"leveton", "phytoton" and "adapton". The MKTs-229 tablets are residue discharge means. For atherosclerosis and general adiposis they recommend "tsar tablets" and "aiconol (ikhtien)"--on the base of cod-liver oil or "splat" made out of seaweed (algae). All these preparations have been clinically tested and received hygiene certificates from the Institute of Dietology of the Russian Academy of Medical Science. PMID:9752776

  7. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  8. Hydrocarbon fuel additive

    SciTech Connect

    Ambrogio, S.

    1989-02-28

    This patent describes the method of fuel storage or combustion, wherein the fuel supply contains small amounts of water, the step of adding to the fuel supply an additive comprising a blend of a hydrophilic agent chosen from the group of ethylene glycol, n-butyl alcohol, and cellosolve in the range of 22-37% by weight; ethoxylated nonylphenol in the range of 26-35% by weight; nonylphenol polyethylene glycol ether in the range of 32-43% by weight.

  9. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  10. Radiological Work Planning and Procedure

    SciTech Connect

    KURTZ, J.E.

    2000-01-01

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In addition, there seems to be confusion as to what should be and what should not be included in the TWD.

  11. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  12. Oil additive process

    SciTech Connect

    Bishop, H.

    1988-10-18

    This patent describes a method of making an additive comprising: (a) adding 2 parts by volume of 3% sodium hypochlorite to 45 parts by volume of diesel oil fuel to form a sulphur free fuel, (b) removing all water and foreign matter formed by the sodium hypochlorite, (c) blending 30 parts by volume of 24% lead naphthanate with 15 parts by volume of the sulphur free fuel, 15 parts by volume of light-weight material oil to form a blended mixture, and (d) heating the blended mixture slowly and uniformly to 152F.

  13. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  14. Porosity of additive manufacturing parts for process monitoring

    SciTech Connect

    Slotwinski, J. A.; Garboczi, E. J.

    2014-02-18

    Some metal additive manufacturing processes can produce parts with internal porosity, either intentionally (with careful selection of the process parameters) or unintentionally (if the process is not well-controlled.) Material porosity is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants, since surface-breaking pores allow for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the process. We are developing an ultrasonic sensor for detecting changes in porosity in metal parts during fabrication on a metal powder bed fusion system, for use as a process monitor. This paper will describe our work to develop an ultrasonic-based sensor for monitoring part porosity during an additive build, including background theory, the development and detailed characterization of reference additive porosity samples, and a potential design for in-situ implementation.

  15. Porosity of additive manufacturing parts for process monitoring

    NASA Astrophysics Data System (ADS)

    Slotwinski, J. A.; Garboczi, E. J.

    2014-02-01

    Some metal additive manufacturing processes can produce parts with internal porosity, either intentionally (with careful selection of the process parameters) or unintentionally (if the process is not well-controlled.) Material porosity is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants, since surface-breaking pores allow for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the process. We are developing an ultrasonic sensor for detecting changes in porosity in metal parts during fabrication on a metal powder bed fusion system, for use as a process monitor. This paper will describe our work to develop an ultrasonic-based sensor for monitoring part porosity during an additive build, including background theory, the development and detailed characterization of reference additive porosity samples, and a potential design for in-situ implementation.

  16. Projects Work!

    ERIC Educational Resources Information Center

    Textor, Martin R.

    2005-01-01

    The great educational value of projects is emphasized by contrasting negative aspects of the life of today's children with the goals of project work. This is illustrated by a project "Shopping." It is shown what children are learning in such projects and what the advantages of project work are. Relevant topic areas, criteria for selecting a…

  17. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  18. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  19. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  20. 10 CFR 2.625 - Additional considerations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Work Authorizations Early Partial Decisions on Site Suitability-Combined License Under 10 Cfr Part 52 § 2.625 Additional considerations. (a) The Commission will not conduct more than one review of site... 10 Energy 1 2014-01-01 2014-01-01 false Additional considerations. 2.625 Section 2.625...

  1. 10 CFR 2.625 - Additional considerations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Work Authorizations Early Partial Decisions on Site Suitability-Combined License Under 10 Cfr Part 52 § 2.625 Additional considerations. (a) The Commission will not conduct more than one review of site... 10 Energy 1 2013-01-01 2013-01-01 false Additional considerations. 2.625 Section 2.625...

  2. Multi-heat addition turbine engine

    NASA Technical Reports Server (NTRS)

    Franciscus, Leo C. (Inventor); Brabbs, Theodore A. (Inventor)

    1993-01-01

    A multi-heat addition turbine engine (MHATE) incorporates a plurality of heat addition devices to transfer energy to air and a plurality of turbines to extract energy from the air while converting it to work. The MHATE provides dry power and lower fuel consumption or lower combustor exit temperatures.

  3. 76 FR 5142 - Procurement List; Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-28

    ... Procurement List. Service Type/Location: Base Operations Support Service Directorate of Public Works (DPW... PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the Procurement...

  4. The Other Pinakes and Reference Works of Callimachus

    ERIC Educational Resources Information Center

    Witty, Francis J.

    1973-01-01

    Recognizing the Mouseion's immediate need for reference works, Callimachus, in addition to compiling the great library catalog ( Pinakes''), also produced a large number of reference works in a myriad of subjects including anthropology, geography, history, ornithology, and literary history and criticism. (12 references) (Author)

  5. Grading Written Work: An Integral Part of Writing Workshop Practice

    ERIC Educational Resources Information Center

    Robbins, Kristen

    2011-01-01

    This article chronicles how the process of reviewing and grading student written work became an integral part of a middle school teacher's writing workshop practice. In addition to discussing how reading student work can bring educators back to the heart of the profession (including the belief that spending time with drafts can reap more rewards…

  6. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  7. Working longer.

    PubMed

    2014-11-27

    New NHS pension scheme rules come into force in April, and one of the changes is a higher retirement age. To help staff plan for this, NHS Employers' Working Longer Group will publish a suite a resources to help employees understand and prepare for the implications of working into their late sixties. In the meantime, a factsheet with information for staff can be found at tinyurl.com/mjb4u5f and for employers at http://www.nhsemployers.org/your-workforce/need-to-know/working-longer-group. PMID:25428321

  8. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  9. Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

    SciTech Connect

    Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

    2015-12-08

    An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

  10. Does Work Experience Actually Work?

    ERIC Educational Resources Information Center

    Field, John

    2012-01-01

    As unemployment levels rise, so education and training move into the policy spotlight. For the government, this is a very uncomfortable place to be right now. A number of large companies have withdrawn from the flagship Work Programme--under which jobseekers are invited to take up unpaid work placements of between two and eight weeks--amid…

  11. Is New Work Good Work?

    ERIC Educational Resources Information Center

    Westwood, Andy

    Some new work is good work. Quality is ultimately defined by the individual. However, these perceptions are inevitably colored by the circumstances in which people find themselves, by the time, place, and wide range of motivations for having to do a particular job in the first place. One person's quality may be another's purgatory and vice versa.…

  12. Which Welfare Work Strategies Work?

    ERIC Educational Resources Information Center

    Dickinson, Nancy S.

    1986-01-01

    AFDC Welfare work strategies have been implemented to help AFDC (Aid to Families with Dependent Children) recipients secure unsubsidized employment. Reviews research on employment programs for AFDC clients and highlights the respective advantages of these programs. Suggests program changes to improve welfare work strategies. (Author/ABB)

  13. Does "Social Work Abstracts" Work?

    ERIC Educational Resources Information Center

    Holden, Gary; Barker, Kathleen; Covert-Vail, Lucinda; Rosenberg, Gary; Cohen, Stephanie A.

    2008-01-01

    Objective: The current study seeks to provide estimates of the adequacy of journal coverage in the Social Work Abstracts (SWA) database. Method: A total of 23 journals listed in the Journal Citation Reports social work category during the 1997 to 2005 period were selected for study. Issue-level coverage estimates were obtained for SWA and…

  14. Working Parents

    MedlinePlus

    ... as the family's values, fathers may assume more responsibility for child care and housework than has traditionally ... and fatigue as they try to juggle their responsibilities at home and at work. If you are ...

  15. [Work addiction].

    PubMed

    Mentzel, G

    1979-01-01

    The symptomatology of workaholism (work addiction) was presented in the form of a questionnaire and compared with other forms of addiction, especially alcoholism. Then a case was used as example to illustrate the development of the illness and its psychodynamics. The therapy procedure was also briefly explained. Moreover the psychodynamics of workaholism (work addiction) are described, once again in comparison to other addictions. Finally the author gives general guidelines for therapy. PMID:452731

  16. Metal Additive Manufacturing: A Review of Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Lewandowski, John J.; Seifi, Mohsen

    2016-07-01

    This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test orientation/build direction on properties, when available, are also provided, along with discussion of the potential source(s) (e.g., texture, microstructure changes, defects) of anisotropy in properties. Recommendations for additional work are also provided.

  17. Should Relational Aggression Be Included in DSM-V?

    ERIC Educational Resources Information Center

    Keenan, Kate; Coyne, Claire; Lahey, Benjamin B.

    2008-01-01

    The study examines whether relational aggression should be included in DSM-V disruptive behavior disorders. The results conclude that some additional information is gathered from assessing relational aggression but not enough to be included in DSM-V.

  18. The Work/Leisure Connection.

    ERIC Educational Resources Information Center

    Kimeldorf, Martin; And Others

    1989-01-01

    Seven chapters in this special issue include "The Work/Leisure Connection" (McDaniels); "Changing Relations between Work and Leisure" (Godbey); "Wellness in the Leisure-Work Relationship" (McDowell); "Concept of Work: Updating a Point of View" (Hoyt); "A Working Future?" (Watts); "Beyond Career...Avoiding the Postretirement Blues" (Jackson); and…

  19. Changing Urban Work Ethic

    ERIC Educational Resources Information Center

    Pagano, Helen P.

    1974-01-01

    In an urbanized society, work and leisure include an orientation toward control, achievement, and the mobilization of energy to specific ends. Workers' attitudes, both white and blue collar, are becoming increasingly permissive and exploratory. (Author)

  20. Education and Work.

    ERIC Educational Resources Information Center

    Poole, Millicent E., Ed.

    This book contains 13 papers that identify major education and work issues related to post-compulsory schooling in Australia. The following papers are included: "Changing Policy Perspectives" (Millicent E. Poole); "A Historical Essay" (Andrew Spaull); "A Philosophical Perspective" (Colin W. Evers); "School to Work: Transition and Policy" (Cath…

  1. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    NASA Astrophysics Data System (ADS)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    The dilemma of designing an advanced undergraduate laboratory lies in the desire to teach and reinforce basic principles and techniques while at the same time exposing students to the excitement of research. We report here on a one-semester, project-based biochemistry laboratory that combines the best features of a cookbook approach (high success rate, achievement of defined goals) with those of an investigative, discovery-based approach (student involvement in the experimental design, excitement of real research). Individual modules may be selected and combined to meet the needs of different courses and different institutions. The central theme of this lab is protein purification and design. This laboratory accompanies the first semester of biochemistry (Structure and Function of Macromolecules, a course taken mainly by junior and senior chemistry and biological chemistry majors). The protein chosen as the object of study is the enzyme lysozyme, which is utilized in all projects. It is suitable for a student lab because it is easily and inexpensively obtained from egg white and is extremely stable, and its high isoelectric point (pI = 11) allows for efficient separation from other proteins by ion-exchange chromatography. Furthermore, a literature search conducted by the resourceful student reveals a wealth of information, since lysozyme has been the subject of numerous studies. It was the first enzyme whose structure was determined by crystallography (1). Hendrickson et al. (2) have previously described an intensive one-month laboratory course centered around lysozyme, although their emphasis is on protein stability rather than purification and engineering. Lysozyme continues to be the focus of much exciting new work on protein folding and dynamics, structure and activity (3 - 5). This lab course includes the following features: (i) reinforcement of basic techniques, such as preparation of buffers, simple enzyme kinetics, and absorption spectroscopy; (ii

  2. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  3. Wetlands Work

    ERIC Educational Resources Information Center

    Messina, Linda; Blanchard, Pamela Borne

    2004-01-01

    This article describes how a biology teacher's search for a cross-curricular project in science, math, history, and environmental science, that would help her students connect what they were learning in the classroom to their everyday life, resulted in an ongoing stewardship project. Working together with the Louisiana Sea Grant College Program…

  4. Work Simplification

    ERIC Educational Resources Information Center

    Ross, Lynne

    1970-01-01

    Excerpts from a talk by Mrs. Ross at the 23rd annual convention of the American School Food Service Association in Detroit, August 5, 1969. A book on work simplification by Mrs. Ross will be available in June from the Iowa State University Press, Ames, Iowa. (Editor)

  5. Working Information

    ERIC Educational Resources Information Center

    Lloyd, Annemaree; Somerville, Margaret

    2006-01-01

    Purpose: The purpose of this article is to explore the contribution that an information literacy approach to the empirical study of workplace learning can make to how people understand and conceptualise workplace learning. Design/methodology/approach: Three cohorts of fire-fighters working in two regional locations in NSW, Australia were…

  6. Working Together

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2010-01-01

    Students need space to gather, share ideas, talk, develop common understanding and work to create greater knowledge. This focus on collaboration has put a strain on group study spaces. Students need to collaborate spontaneously, and scheduling time in a study room is not conducive to spur-of-the-moment collaboration. At many education…

  7. Working Corners

    ERIC Educational Resources Information Center

    Hochtritt, Lisa

    2007-01-01

    When people think of a person "working the corners," a G-rated image does not generally come to mind. Yet that is precisely what the author, posing as "June Cleavage," did in New York City one dreary morning: she facilitated a meeting of strangers through the creation of a character and an approachable situation. June, with her wacky outfit and…

  8. Biotechnology Works!

    ERIC Educational Resources Information Center

    Cohen, Libby G.; Spenciner, Loraine

    There have been few initiatives addressing the improvement of science education for students with disabilities. Funded by the National Science Foundation, Biotechnology Works is a summer institute in immunology and genetics for students with disabilities, high school science teachers, and high school counselors. During the 1998 summer session,…

  9. Should family planning include STD services?

    PubMed

    Finger, W R

    1994-05-01

    Recent reviews suggest that the addition of programs aimed at preventing and controlling sexually transmitted diseases (STDs), specifically human immunodeficiency virus (HIV), to existing family planning programs does not necessarily dilute overall program effectiveness. In Colombia, Mexico, and Jamaica, where condom distribution and/or information to prevent HIV transmission was integrated into the activities of family planning field workers, no negative effect on the image of condoms as a pregnancy prevention method was observed and there was a great demand on the part of family planning clients for information about acquired immunodeficiency syndrome (AIDS). In Brazil, family planning staff are receiving training in HIV risk assessment and the counseling of women in partner negotiation skills. However, steps must be taken to reach men since it is their high-risk behavior that puts most women at risk of HIV. Both separate STD clinics for men and condom social marketing projects have yielded promising results. Obstacles to the addition of STD services to family planning programs include the need to treat male partners as well as female clients, a shortage of diagnostic tools and antibiotics for treatment, and the fact that the majority of women with STDs are asymptomatic. Indicative of the increased attention being given this approach, however, is the recent release of guidelines by the US Agency for International Development Office of Population on how family planning programs should approach integration. Suggested activities include condom promotion, behavior change, counseling, information, contraceptive development, and selected efforts at STD treatment. PMID:12287744

  10. Feasibility of a simplified fuel additive evaluation protocol

    SciTech Connect

    Lister, S.J.; Hunzinger, R.D.; Taghizadeh, A.

    1998-12-31

    This report describes the work carried out during the four stages of the first phase of a project that involved the determination of the feasibility of replacing the Association of American Railroads Recommended Practice (ARRP) 503 protocol for testing diesel fuel oil additives with a new procedure using the single cylinder research engine SCRE-251 as the laboratory test engine, which tests for both engine performance as well as emissions compliance. The report begins with a review of the literature on fuel additive testing, then reviews the new US Environmental Protection Agency regulations regarding locomotive diesel emissions. This is followed by a review of the ARRP 503 protocol and the proposed new procedure, a comparison of the ARRP 503 test engines and the SCRE-251, and a study of the SCRE-251`s ability to represent a multi-cylinder medium-speed diesel engine. Appendices include fuel additive manufacturers` information sheets.

  11. Photostability of pyrromethene 567 doped in ORMOSILs with various additives

    NASA Astrophysics Data System (ADS)

    Yang, Yu; Qian, Guodong; Su, Deliang; Wang, Minquan

    2004-09-01

    In this work, laser dye pyrromethene 567 (p567) was doped into methyltriethoxysilane (MTES)-derived organically modified silicate (ORMOSIL) monolith with various photo-stable additives including 1,4-diazobicyclo[2,2,2]octane (DABCO), 2,2,6,6-tetramethylpiperdin (TMP) and coumarin 440 (C440). The photostability of p567 was determined under continuous ultraviolet irradiation and its dependence on the concentration of each additive was studied. The results illustrated that the photostability of p567 in ORMOSIL with the optimized concentration of DABCO or TMP was improved by at least 100%. The highest photostability of p567 was obtained with the presence of C440, where at least four times of improvement has been observed. The photo-stable mechanisms of additives have also been discussed.

  12. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  13. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in...

  14. 19 CFR 134.2 - Additional duties.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... COUNTRY OF ORIGIN MARKING General Provisions § 134.2 Additional duties. Articles not marked as required by... container) to indicate the English name of the country of origin of the article or to include words...

  15. 78 FR 22209 - Additional Synthetic Drug Testing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... COMMISSION 10 CFR Part 26 Additional Synthetic Drug Testing AGENCY: Nuclear Regulatory Commission. ACTION... NRC amend its Fitness for Duty program regulations to amend drug testing requirements to test for additional synthetic drugs currently not included in the regulations. The NRC determined that the...

  16. Asthma and anaphylactoid reactions to food additives.

    PubMed Central

    Tarlo, S. M.; Sussman, G. L.

    1993-01-01

    Presumed allergic reactions to hidden food additives are both controversial and important. Clinical manifestations include asthma, urticaria, angioedema, and anaphylactic-anaphylactoid events. Most adverse reactions are caused by just a few additives, such as sulfites and monosodium glutamate. Diagnosis is suspected from the history and confirmed by specific challenge. The treatment is specific avoidance. PMID:8499792

  17. Self-managed work teams: what works?

    PubMed

    Yeatts, D E; Schulz, E

    1998-01-01

    Case studies have shown that under the right circumstances, employees within self-managed work teams (SMWTs) produce more at work than employees organized in a more hierarchical, traditional structure because they perform not only technical skills, but management skills as well. The purpose of this article is to clarify the specific factors most important to an SMWT's success. The information shared here comes from three sources. The primary source is a research project funded by a 3-year grant (1994-1997) from the National Science Foundation. The primary factors found to affect the success of SMWTs formed five groups. Work process factors include those that are needed when actually performing the work, such as the appropriate resources, talent, procedures, and effort. Interpersonal process factors include communication and both positive and negative conflict. Environmental factors include those within the SMWT'S organization, such as management support and the reward system, as well as factors outside the organization, such as suppliers and the market. Team design factors and team member characteristics were found to be equally important to the high performance of the SMWT. PMID:10178700

  18. Addition polyimide end cap study

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.

    1980-01-01

    The characterization of addition polyimides with various end caps for adhesive applications at 120-250 C environments is discussed. Oligometric polyimides were prepared from 3,3',4,4'-benzophenone tetracarboxylic dianhydride and 3,3'-methylenedianiline which were end-capped with functionally reactive moities which cause crosslinking when the oligomers are heated to 200-400 C. The syntheses of the oligomers are outlined. The thermolysis of the oligomers was studied by differential scanning calorimetry and the resulting polymers were characterized by differential thermal analysis and adhesive performance. The adhesive data include lap shear strengths on titanium 6-4 adherends both before and after aging for 1000 hours at 121 C and/or 232 C.

  19. School Social Work Worldwide.

    ERIC Educational Resources Information Center

    Huxtable, Marion, Ed.; Blyth, Eric, Ed.

    This book, with sequentially arranged chapters, allow practitioners, educators, and students to follow the expansion of school social work practice around the world. Leaders in the field from 12 countries provide eye-opening perspectives and interventions, selected for their range and application. Additionally, the book looks ahead to policy and…

  20. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate. PMID:3302664

  1. Tough, High-Performance, Thermoplastic Addition Polymers

    NASA Technical Reports Server (NTRS)

    Pater, Ruth H.; Proctor, K. Mason; Gleason, John; Morgan, Cassandra; Partos, Richard

    1991-01-01

    Series of addition-type thermoplastics (ATT's) exhibit useful properties. Because of their addition curing and linear structure, ATT polymers have toughness, like thermoplastics, and easily processed, like thermosets. Work undertaken to develop chemical reaction forming stable aromatic rings in backbone of ATT polymer, combining high-temperature performance and thermo-oxidative stability with toughness and easy processibility, and minimizing or eliminating necessity for tradeoffs among properties often observed in conventional polymer syntheses.

  2. Exploring scientists' working timetable: Do scientists often work overtime?

    NASA Astrophysics Data System (ADS)

    Wang, Xianwen; Xu, Shenmeng; Peng, Lian; Wang, Zhi; Wang, Chuanli; Zhang, Chunbo; Wang, Xianbing

    2012-10-01

    A novel method is proposed to monitor and record scientists' working timetable. We record the downloads information of scientific papers real-timely from Springer round the clock, and try to explore scientists' working habits. As our observation demonstrates, many scientists are still engaged in their research after working hours every day. Many of them work far into the night, even till next morning. In addition, research work also intrudes into their weekends. Different working time patterns are revealed. In the US, overnight work is more prevalent among scientists, while Chinese scientists mostly have busy weekends with their scientific research.

  3. Teaching Engineering Students Team Work

    NASA Technical Reports Server (NTRS)

    Levi, Daniel

    1998-01-01

    The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

  4. Multitasking and Synchronous Work: Complexities in Teacher Work

    ERIC Educational Resources Information Center

    Brante, Goran

    2009-01-01

    Teacher work is described as increasing in complexity and intensity. Reasons for this include societal changes, reformed and increased work tasks, and the changed moral and normative character of teacher work, but also teachers' experiences of doing more than one thing at the same time, and of thinking about one's work at all times. The concept of…

  5. Leather Work.

    ERIC Educational Resources Information Center

    Greenup, Shirley

    Based on a minicourse taught by the author for students in grades 7 through 10 at the Mountain School (Lookout Mountain, Georgia), this curriculum guide provides for the integration of several curriculum areas into the teaching of leathercraft. Contents include (1) concepts and objectives for the course listed under the headings of language arts,…

  6. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  7. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  8. 75 FR 32450 - TideWorks, LLC; Notice of Application Accepted for Filing, Soliciting Motions To Intervene and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-08

    ... Energy Regulatory Commission TideWorks, LLC; Notice of Application Accepted for Filing, Soliciting...: January 15, 2010. d. Applicant: TideWorks, LLC. e. Name of Project: TideWorks Project. f. Location: On the... requested additional information from TideWorks, LLC including project operation, water velocity,...

  9. Temporary agency contracts: what should they include?

    PubMed

    Sferrella, Sheila M

    2002-01-01

    The AHRA Board committed to provide some tools to help our members with agency contracts. This article provides the sections for a contract and what they should include. Of course, the language will have to comply with your organization's requirements. To comply with HIPAA regulations for contracts, I've also included language for business associates. JCAHO requires that the following documentation be on file for all contracted personnel: 1. Hospital job description or formal contract outlining the job responsibilities. 2. All licenses, certifications and registrations are reviewed and a process is developed to ensure that they remain current. 3. Competency is evaluated and maintained. 4. Evidence that personnel received a general orientation. 5. Evidence that personnel received a departmental orientation. 6. Safety and infection control standards must be met. In order to aid with compliance when utilizing contracted personnel, my organization developed a Contractor Personnel Administrative Compliance Checklist, which identifies requirements for compliance, a reference for assistance, and places to record that the requirement has been met for each of the areas listed in the previous item. Our standard contract includes sections on general definition of engagement, credentials and work experience; health, including immunization and drug testing; corporation; JCAHO; terms of the contract; and, non-disclosure of information. A business associate agreement may be necessary to comply with HIPAA regulations. Using the template has made my job much easier than trying to read each contract that crosses my desk. If an agency refuses to sign our contract, then we do not conduct business with that company. If an agency requests changes to the contract, depending on the language, we may or may not agree to it. This information is not intended to be legal advice, but rather an educational overview. As with any contract, the reader should consult with legal counsel at his or her

  10. The effects of nationality differences and work stressors on work adjustment for foreign nurse aides

    PubMed Central

    2011-01-01

    Background The main purpose of this study was to discuss the nationality differences of foreign nurse aides and the effect of work stressors influencing work adjustment. And of helping them adapt to Taiwanese society, we summarized the difficulties that foreign nurse aides face in Taiwan. Methods The subjects included 80 foreign nurse aides from the Philippines, Indonesia, and Vietnam who worked in long-term care facilities in Tao Yuan County. We recruited volunteers at the participating facilities to complete the anonymous questionnaires. The return rate of the questionnaire was 88.75%. The validated instruments of Hershenson's (1981) and Schaefer and Moos (1993) were adopted to measure work stressors and work adjustment, respectively. A forward-backward translation process was used in this study. Results Indonesian foreign nurse aides respect their work, and are better workers than Vietnamese and Filipino nurse aids in many respects, which shows how the nationality of the foreign nurse aides might affect work adjustment. The stress created from patient care tasks influenced the foreign nurse aides' personal relationships at work and also affected their attitude when they performed their tasks. In addition, pressure from their supervisors might have affected their work skills, work habits, personal relationships, self-concepts or work attitudes. Moreover, a heavy workload and improper scheduling might have affected the personal relationships and work attitudes of the foreign nurse aides. It was found that work stressors had a significant correlation with work adjustment. Conclusions The results of the present study indicate that training programs are important factors for work adjustment among foreign nurse aides. Furthermore, celebration and leisure activities could be provided to release them from work stressors. More effort should be put into improving the working environment, namely providing a more supportive and enriching atmosphere. Based on these findings

  11. RELAP5-3D Code Includes Athena Features and Models

    SciTech Connect

    Richard A. Riemke; Cliff B. Davis; Richard R. Schultz

    2006-07-01

    Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, sf6, xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5- 3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper.

  12. RELAP5-3D Code Includes ATHENA Features and Models

    SciTech Connect

    Riemke, Richard A.; Davis, Cliff B.; Schultz, Richard R.

    2006-07-01

    Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, SF{sub 6}, xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5-3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper. (authors)

  13. [Changes in the nature of work].

    PubMed

    Schütte, M; Köper, B

    2013-03-01

    "Dynamic", "complexity", and "diversity" are terms that best describe the challenges in the workplace resulting from the changing nature of work. These changes should conform to the criteria of human-related work design. However, the number of pensions for reduced earning capacity and the number of unfit for work days caused by psychic disorders are rising. Affective disorders, including depression, are the largest group. Depression represents a long-term consequence of work demands. Empirical results confirm a significant relationship between depression and the objective existing as well as the subjective perceived workload conditions. Burn-out as a further long-term consequence depends inter alia on the design of the physical work demands, the environmental conditions, the psychosocial conditions, and the transparency of the decision and information processes in a company. Additionally, empirical results show that the short-term consequences of work demands, i.e., fatigue, satiation, and monotony correlate with the burn-out components of exhaustion and alienation from work. Furthermore, using restructuring as an example, it is demonstrated that the changes in work that accompany modifications in the working world also have other health-related consequences. PMID:23455560

  14. A Simple Experimental Setup for Teaching Additive Colors with Arduino

    NASA Astrophysics Data System (ADS)

    Carvalho, Paulo Simeão; Hahn, Marcelo

    2016-04-01

    The result of additive colors is always fascinating to young students. When we teach this topic to 14- to 16-year-old students, they do not usually notice we use maximum light quantities of red (R), green (G), and blue (B) to obtain yellow, magenta, and cyan colors in order to build the well-known additive color diagram of Fig. 1. But how about using different light intensities for R, G, and B? What colors do we get? This problem of color mixing has been intensively discussed for decades by several authors, as pointed out by Ruiz's "Color Addition and Subtraction Apps" work and the references included therein. An early LED demonstrator for additive color mixing dates back to 1985, and apps to illustrate color mixing are available online. In this work, we describe an experimental setup making use of a microcontroller device: the Arduino Uno. This setup is designed as a game in order to improve students' understanding of color mixing.

  15. The effect of additives on lime dissolution rates. Final report

    SciTech Connect

    Khang, S.J.

    1996-07-31

    Based on the previous years` studies concerning the efficiency of SO{sub 2} removal by spray dryers with high sulfur coal flue gas, the work for year five included investigations of lime dissolution rates at different slaking conditions and with the effect of additives. The prominent additives that have significant effects on lime dissolution rates were tested with the mini pilot spray drying absorber to see their effects on spray drying desulfurization applications. The mechanisms of these additive effects along with the properties of hygroscopic additives have been discussed and incorporated into the spray drying desulfurization model ``SPRAYMOD-M.`` Slaking conditions are very important factors in producing high quality lime slurry in spray drying desulfurization processes. At optimal slaking conditions, the slaked lime particles are very fine (3-5{mu}m) and the slaked lime has high BET surface areas which are beneficial to the desulfurization. The slaked lime dissolution rate experiments in our study are designed to determine how much lime can dissolve in a unit time if the initial lime surface area is kept constant. The purpose of the dissolution rate study for different additives is to find those effective additives that can enhance lime dissolution rates and to investigate the mechanisms of the dissolution rate enhancement properties for these additives. The applications of these additives on spray drying desulfurization are to further verify the theory that dissolution rate is a rate limiting step in the whole spray drying desulfurization process as well as to test the feasibility of these additives on enhancing SO{sub 2} removal in spray dryers.

  16. Additive Manufacturing: Making Imagination the Major Limitation

    NASA Astrophysics Data System (ADS)

    Zhai, Yuwei; Lados, Diana A.; LaGoy, Jane L.

    2014-05-01

    Additive manufacturing (AM) refers to an advanced technology used for the fabrication of three-dimensional near-net-shaped functional components directly from computer models, using unit materials. The fundamentals and working principle of AM offer several advantages, including near-net-shape capabilities, superior design and geometrical flexibility, innovative multi-material fabrication, reduced tooling and fixturing, shorter cycle time for design and manufacturing, instant local production at a global scale, and material, energy, and cost efficiency. Well suiting the requests of modern manufacturing climate, AM is viewed as the new industrial revolution, making its way into a continuously increasing number of industries, such as aerospace, defense, automotive, medical, architecture, art, jewelry, and food. This overview was created to relate the historical evolution of the AM technology to its state-of-the-art developments and emerging applications. Generic thoughts on the microstructural characteristics, properties, and performance of AM-fabricated materials will also be discussed, primarily related to metallic materials. This write-up will introduce the general reader to specifics of the AM field vis-à-vis advantages and common techniques, materials and properties, current applications, and future opportunities.

  17. Managerial practices regarding workers working while ill.

    PubMed

    Norton, D M; Brown, L G; Frick, R; Carpenter, L R; Green, A L; Tobin-D'Angelo, M; Reimann, D W; Blade, H; Nicholas, D C; Egan, J S; Everstine, K

    2015-01-01

    Surveillance data indicate that handling of food by an ill worker is a cause of almost half of all restaurant-related outbreaks. The U.S. Food and Drug Administration (FDA) Food Code contains recommendations for food service establishments, including restaurants, aimed at reducing the frequency with which food workers work while ill. However, few data exist on the extent to which restaurants have implemented FDA recommendations. The Centers for Disease Control and Prevention's Environmental Health Specialists Network (EHS-Net) conducted a study on the topic of ill food workers in restaurants. We interviewed restaurant managers (n = 426) in nine EHS-Net sites. We found that many restaurant policies concerning ill food workers do not follow FDA recommendations. For example, one-third of the restaurants' policies did not specifically address the circumstances under which ill food workers should be excluded from work (i.e., not be allowed to work). We also found that, in many restaurants, managers are not actively involved in decisions about whether ill food workers should work. Additionally, almost 70% of managers said they had worked while ill; 10% said they had worked while having nausea or "stomach flu," possible symptoms of foodborne illness. When asked why they had worked when ill, a third of the managers said they felt obligated to work or their strong work ethic compelled them to work. Other reasons cited were that the restaurant was understaffed or no one was available to replace them (26%), they felt that their symptoms were mild or not contagious (19%), they had special managerial responsibilities that no one else could fulfill (11%), there was non-food handling work they could do (7%), and they would not get paid if they did not work or the restaurant had no sick leave policy (5%). Data from this study can inform future research and help policy makers target interventions designed to reduce the frequency with which food workers work while ill. PMID:25581195

  18. Characterization of Metal Powders Used for Additive Manufacturing

    PubMed Central

    Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

    2014-01-01

    Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

  19. 77 FR 62220 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-12

    ... . SUPPLEMENTARY INFORMATION: Additions On 7/20/2012 (77 FR 42701-42702), 7/27/2012 (77 FR 44220), and 8/ 17/2012 (77 FR 49784), the Committee for Purchase From People Who Are Blind or Severely Disabled published...), Department of Public Works (DPW), 453 Novosel Street, Fort Rucker, AL. NPA: PRIDE Industries, Roseville,...

  20. Additive Manufacturing: From Rapid Prototyping to Flight

    NASA Technical Reports Server (NTRS)

    Prater, Tracie

    2015-01-01

    Additive manufacturing (AM) offers tremendous promise for the rocket propulsion community. Foundational work must be performed to ensure the safe performance of AM parts. Government, industry, and academia must collaborate in the characterization, design, modeling, and process control to accelerate the certification of AM parts for human-rated flight.

  1. How the Japanese work.

    PubMed

    Chambers, D W

    1998-01-01

    The Japanese do not work harder or even use different approaches so much as they aim for a different result--one that balances process and results and extends the definition of quality beyond the product itself to include cost and convenience to the customer as well. Ten methods of the Japanese kaizen culture of work are presented with applications and contrasts to American dentistry. PMID:9929991

  2. 26 CFR 1.612-2 - Allowable capital additions in case of mines.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 7 2013-04-01 2013-04-01 false Allowable capital additions in case of mines. 1... in case of mines. (a) In general. Expenditures for improvements and for replacements, not including... the recession of the working faces of the mine and which: (1) Do not increase the value of the...

  3. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR 50... under 10 CFR 50.10 be issued before issuance of the combined license, the application must include...

  4. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR 50... under 10 CFR 50.10 be issued before issuance of the combined license, the application must include...

  5. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR 50... under 10 CFR 50.10 be issued before issuance of the combined license, the application must include...

  6. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR 50... under 10 CFR 50.10 be issued before issuance of the combined license, the application must include...

  7. Working Electrodes

    NASA Astrophysics Data System (ADS)

    Komorsky-Lovrić, Šebojka

    In electrochemistry an electrode is an electronic conductor in contact with an ionic conductor. The electronic conductor can be a metal, or a semiconductor, or a mixed electronic and ionic conductor. The ionic conductor is usually an electrolyte solution; however, solid electrolytes and ionic melts can be used as well. The term "electrode" is also used in a technical sense, meaning the electronic conductor only. If not specified otherwise, this meaning of the term "electrode" is the subject of the present chapter. In the simplest case the electrode is a metallic conductor immersed in an electrolyte solution. At the surface of the electrode, dissolved electroactive ions change their charges by exchanging one or more electrons with the conductor. In this electrochemical reaction both the reduced and oxidized ions remain in solution, while the conductor is chemically inert and serves only as a source and sink of electrons. The technical term "electrode" usually also includes all mechanical parts supporting the conductor (e.g., a rotating disk electrode or a static mercury drop electrode). Furthermore, it includes all chemical and physical modifications of the conductor, or its surface (e.g., a mercury film electrode, an enzyme electrode, and a carbon paste electrode). However, this term does not cover the electrolyte solution and the ionic part of a double layer at the electrode/solution interface. Ion-selective electrodes, which are used in potentiometry, will not be considered in this chapter. Theoretical and practical aspects of electrodes are covered in various books and reviews [1-9].

  8. GENERAL VIEW OF WESTERN PART OF PLANT INCLUDING (LEFT TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GENERAL VIEW OF WESTERN PART OF PLANT INCLUDING (LEFT TO RIGHT) BETHLEHEM RAIL MILL, GENERAL OFFICE BUILDING, MACHINE SHOP, BAR MILL, BLOOMING MILL & OPEN HEARTH PLANT. - Pittsburgh Steel Company, Monessen Works, Open Hearth Plant, Donner Avenue, Monessen, Westmoreland County, PA

  9. 5. View of north elevation, including saw dust collector and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. View of north elevation, including saw dust collector and brick addition, looking south east. - General Dynamics Corporation Shipyard, Joiner & Sheet Metal Shops, 97 East Howard Street, Quincy, Norfolk County, MA

  10. 20 CFR 404.1013 - Included-excluded rule.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ....1013 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Work Excluded from Employment § 404.1013 Included-excluded rule. (a) If part of your work for an employer during a pay period...

  11. Analysis of Smart Composite Structures Including Debonding

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1997-01-01

    Smart composite structures with distributed sensors and actuators have the capability to actively respond to a changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept due to the static and dynamic control capabilities. Essential to the implementation of these smart composites are the development of accurate and efficient modeling techniques and experimental validation. This research addresses each of these important topics. A refined higher order theory is developed to model composite structures with surface bonded or embedded piezoelectric transducers. These transducers are used as both sensors and actuators for closed loop control. The theory accurately captures the transverse shear deformation through the thickness of the smart composite laminate while satisfying stress free boundary conditions on the free surfaces. The theory is extended to include the effect of debonding at the actuator-laminate interface. The developed analytical model is implemented using the finite element method utilizing an induced strain approach for computational efficiency. This allows general laminate geometries and boundary conditions to be analyzed. The state space control equations are developed to allow flexibility in the design of the control system. Circuit concepts are also discussed. Static and dynamic results of smart composite structures, obtained using the higher order theory, are correlated with available analytical data. Comparisons, including debonded laminates, are also made with a general purpose finite element code and available experimental data. Overall, very good agreement is observed. Convergence of the finite element implementation of the higher order theory is shown with exact solutions. Additional results demonstrate the utility of the developed theory to study piezoelectric actuation of composite

  12. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  13. Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum

    NASA Astrophysics Data System (ADS)

    Vora, Hitesh D.; Rajamure, Ravi Shanker; Roy, Anurag; Srinivasan, S. G.; Sundararajan, G.; Banerjee, Rajarshi; Dahotre, Narendra B.

    2016-07-01

    Various physical and chemical properties of surface and subsurface regions of Al can be improved by the formation of transition metal intermetallic phases (Al x TM y ) via coating of the transition metal (TM). The lower equilibrium solid solubility of TM in Al (<1 at.%) is a steep barrier to the formation of solid solutions using conventional alloying methods. In contrast, as demonstrated in the present work, surface engineering via a laser-aided additive manufacturing approach can effectively synthesize TM intermetallic coatings on the surface of Al. The focus of the present work included the development of process control to achieve thermodynamic and kinetic conditions necessary for desirable physical, microstructural and compositional attributes. A multiphysics finite element model was developed to predict the temperature profile, cooling rate, melt depth, dilution of W in Al matrix and corresponding micro-hardness in the coating, and the interface between the coating and the base material and the base material.

  14. Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum

    NASA Astrophysics Data System (ADS)

    Vora, Hitesh D.; Rajamure, Ravi Shanker; Roy, Anurag; Srinivasan, S. G.; Sundararajan, G.; Banerjee, Rajarshi; Dahotre, Narendra B.

    2016-05-01

    Various physical and chemical properties of surface and subsurface regions of Al can be improved by the formation of transition metal intermetallic phases (Al x TM y ) via coating of the transition metal (TM). The lower equilibrium solid solubility of TM in Al (<1 at.%) is a steep barrier to the formation of solid solutions using conventional alloying methods. In contrast, as demonstrated in the present work, surface engineering via a laser-aided additive manufacturing approach can effectively synthesize TM intermetallic coatings on the surface of Al. The focus of the present work included the development of process control to achieve thermodynamic and kinetic conditions necessary for desirable physical, microstructural and compositional attributes. A multiphysics finite element model was developed to predict the temperature profile, cooling rate, melt depth, dilution of W in Al matrix and corresponding micro-hardness in the coating, and the interface between the coating and the base material and the base material.

  15. Deciphering the roles of multiple additives in organocatalyzed Michael additions.

    PubMed

    Günler, Z Inci; Companyó, Xavier; Alfonso, Ignacio; Burés, Jordi; Jimeno, Ciril; Pericàs, Miquel A

    2016-05-21

    The synergistic effects of multiple additives (water and acetic acid) on the asymmetric Michael addition of acetone to nitrostyrene catalyzed by primary amine-thioureas (PAT) were precisely determined. Acetic acid facilitates hydrolysis of the imine intermediates, thus leading to catalytic behavior, and minimizes the formation of the double addition side product. In contrast, water slows down the reaction but minimizes catalyst deactivation, eventually leading to higher final yields. PMID:27128165

  16. Revisiting Additivity Violation of Quantum Channels

    NASA Astrophysics Data System (ADS)

    Fukuda, Motohisa

    2014-12-01

    We prove additivity violation of minimum output entropy of quantum channels by straightforward application of -net argument and Lévy's lemma. The additivity conjecture was disproved initially by Hastings. Later, a proof via asymptotic geometric analysis was presented by Aubrun, Szarek and Werner, which uses Dudley's bound on Gaussian process (or Dvoretzky's theorem with Schechtman's improvement). In this paper, we develop another proof along Dvoretzky's theorem in Milman's view, showing additivity violation in broader regimes than the existing proofs. Importantly,Dvoretzky's theorem works well with norms to give strong statements, but these techniques can be extended to functions which have norm-like structures-positive homogeneity and triangle inequality. Then, a connection between Hastings' method and ours is also discussed. In addition, we make some comments on relations between regularized minimum output entropy and classical capacity of quantum channels.

  17. Evaluation of certain food additives and contaminants. Eightieth report of the Joint FAO/WHO Expert Committee on Food Additives.

    PubMed

    2016-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants and to prepare specifications for identity and purity. The first part of the report contains a brief description of general considerations addressed at the meeting, including updates on matters of interest to the work of the Committee. A summary follows of the Committee's evaluations of technical, toxicological and/or dietary exposure data for seven food additives (benzoates; lipase from Fusarium heterosporum expressed in Ogataea polymorpha; magnesium stearate; maltotetraohydrolase from Pseudomonas stutzeri expressed in Bacillus licheniformis; mixed β-glucanase, cellulase and xylanase from Rasamsonia emersonii; mixed β-glucanase and xylanase from Disporotrichum dimorphosporum; polyvinyl alcohol (PVA)- polyethylene glycol (PEG) graft copolymer) and two groups of contaminants (non-dioxin-like polychlorinated biphenyls and pyrrolizidine alkaloids). Specifications for the following food additives were revised or withdrawn: advantame; annatto extracts (solavnt extracted bixin, ad solvent-extracted norbixin); food additives containing aluminium and/or silicon (aluminium silicate; calcium aluminium silicate; calcium silicate; silicon dioxide, amorphous; sodium aluminium silicate); and glycerol ester of gum rosin. Annexed to the report are tables or text summarizing the toxicological and dietary exposure information and information on specifications as well as the Committees recommendations on the food additives and contaminants considered at this meeting. PMID:27514183

  18. Hunting for hydrogen: random structure searching and prediction of NMR parameters of hydrous wadsleyite† †Electronic supplementary information (ESI) available: Further information on the structures generated by AIRSS, alternative structural models, supercell calculations, total enthalpies of all computed structures and further information on 1H/2H NMR parameters. Example input and all raw output files from AIRSS and CASTEP NMR calculations are also included. See DOI: 10.1039/c6cp01529h Click here for additional data file.

    PubMed Central

    Moran, Robert F.; McKay, David; Pickard, Chris J.; Berry, Andrew J.; Griffin, John M.

    2016-01-01

    The structural chemistry of materials containing low levels of nonstoichiometric hydrogen is difficult to determine, and producing structural models is challenging where hydrogen has no fixed crystallographic site. Here we demonstrate a computational approach employing ab initio random structure searching (AIRSS) to generate a series of candidate structures for hydrous wadsleyite (β-Mg2SiO4 with 1.6 wt% H2O), a high-pressure mineral proposed as a repository for water in the Earth's transition zone. Aligning with previous experimental work, we solely consider models with Mg3 (over Mg1, Mg2 or Si) vacancies. We adapt the AIRSS method by starting with anhydrous wadsleyite, removing a single Mg2+ and randomly placing two H+ in a unit cell model, generating 819 candidate structures. 103 geometries were then subjected to more accurate optimisation under periodic DFT. Using this approach, we find the most favourable hydration mechanism involves protonation of two O1 sites around the Mg3 vacancy. The formation of silanol groups on O3 or O4 sites (with loss of stable O1–H hydroxyls) coincides with an increase in total enthalpy. Importantly, the approach we employ allows observables such as NMR parameters to be computed for each structure. We consider hydrous wadsleyite (∼1.6 wt%) to be dominated by protonated O1 sites, with O3/O4–H silanol groups present as defects, a model that maps well onto experimental studies at higher levels of hydration (J. M. Griffin et al., Chem. Sci., 2013, 4, 1523). The AIRSS approach adopted herein provides the crucial link between atomic-scale structure and experimental studies. PMID:27020937

  19. Work Programme, 2001.

    ERIC Educational Resources Information Center

    European Centre for the Development of Vocational Training, Thessaloniki (Greece).

    This publication presents the work program for 2001 for the European Center for the Development of Vocational Training (CEDEFOP) set in the framework of four operational guidelines (OGs). The section on each OG contains an introduction including CEDEFOP's aims, followed by descriptions of research projects relevant to the OG. Each of the 11…

  20. Balancing Work & Family.

    ERIC Educational Resources Information Center

    Hutchinson Community Junior Coll., KS.

    This curriculum is based on what students need to know, to be able to do, and to be like in order to be competent in the work of the family. Each of the 12 units follows a uniform format that includes the following: perennial problem (one faced over and over by successive generations of families); practical problem (the organizing scheme for how…

  1. CLE Working Papers 1.

    ERIC Educational Resources Information Center

    Southampton Univ. (England). Centre for Language Education.

    The purpose of these working papers is to reflect the current activities of members of the Centre for Language in Education at the University of Southampton, England. They include: (1) "Inaugural Lecture: Is Language Education or Is Education Language?" (Christopher Brumfit); (2) "Teachers' Views of Language Knowledge" (Rosamond Mitchell and Janet…

  2. Gender Inequality at Work.

    ERIC Educational Resources Information Center

    Jacobs, Jerry A., Ed.

    These 14 papers address many dimensions of gender inequality at work. The empirical studies include examinations of original surveys, secondary analyses of large data sets, and historical reports assaying the significance of personal, family, and structural factors with regard to gender in the workplace. An introduction (Jacobs) sketches how sex…

  3. How Things Work.

    ERIC Educational Resources Information Center

    Crane, H. Richard

    This book is a collection of 66 "How Things Work" columns from the journal "The Physics Teacher," 1983-1991. All the devices and phenomena are ones that are met in everyday life, involve physics principles, and require explanations that are not immediately obvious. Topics include: touch panels in elevators, liquid crystal displays, metal locators,…

  4. Work and Development.

    ERIC Educational Resources Information Center

    Bruton, Henry; Fairris, David

    1999-01-01

    Provides a framework of analysis for determining whether workers' nonmonetary interests regarding the workplace are taken into account during the process of economic development. Argues for including attention to workplace quality and mechanisms for worker voice as a requirement for meaningful work. (JOW)

  5. Working Group C Summary

    NASA Astrophysics Data System (ADS)

    Nuhn, H.-D.

    2003-12-01

    Working group C, "Application to FELs," of the Joint ICFA Advanced Accelerator and Beam Dynamics Workshop on July 1-6, 2002 in Chia Laguna, Sardinia, Italy addressed a total of nine topics. This summary will discuss the topics that were addressed in the stand-alone sessions, including Start-To-End Simulations, SASE Experiment, PERSEO, "Optics Free" FEL Oscillators, and VISA II.

  6. Work Analysis and Expertise.

    ERIC Educational Resources Information Center

    1997

    This document contains four papers from a symposium on work analysis and expertise. "A Taxonomy of Employee Development: Toward an Organizational Culture of Expertise" (Ronald L. Jacobs) includes five categories of employee competence: novice, specialist, experienced specialist, expert, and master. "An Integrated Needs Assessment-Evaluation…

  7. CLE Working Papers 3.

    ERIC Educational Resources Information Center

    Blue, George, Ed.

    This third volume by the Centre for Language in Education (CLE) is intended to bring together a number of concerns currently under review at the Centre. Articles in this issue include: "Managing Open Learning" (Vicky Wright); "Self-Assessment of Foreign Language Skills: Does It Work?" (George Blue); "Language Awareness and Language Development:…

  8. How Science Works (HSW)

    ERIC Educational Resources Information Center

    Roberts, Ros

    2009-01-01

    QCA specified that science should include "How Science Works" at Key Stage 4 (age 14-16) from 2006. Since then, different "versions" have been specified for inclusion from primary through to A-Level (Orrow-Whiting et al, 2007). HSW seems to act as an umbrella term for part of the curriculum that "focuses on the evidence to support or refute…

  9. Action Learning at Work.

    ERIC Educational Resources Information Center

    Mumford, Alan, Ed.

    This book contains 34 papers examining the theory, process, and outcomes of action learning at work. The following papers are included: "An Introduction to the Text" (Alan Mumford); "The Learning Equation" (Reg Revans); "Action Learning as a Vehicle for Learning" (Alan Mumford); "Placing Action Learning and Action Research in Context" (Cliff…

  10. Defiance at Work.

    ERIC Educational Resources Information Center

    Analoui, Farhad; Kakabadse, Andrew

    1989-01-01

    In service industries, conflict at work is often covert and individualistic in nature. This issue analyzes such activities in a night club setting and is based upon six years of research. It illustrates how employees resisted instructions or sought to "get even" with those who had alienated them. Includes suggestions for management. (JOW)

  11. Generalization of Equivalent Crystal Theory to Include Angular Dependence

    NASA Technical Reports Server (NTRS)

    Ferrante, John; Zypman, Fredy R.

    2004-01-01

    In the original Equivalent Crystal Theory, each atomic site in the real crystal is assigned an equivalent lattice constant, in general different from the ground state one. This parameter corresponds to a local compression or expansion of the lattice. The basic method considers these volumetric transformations and, in addition, introduces the possibility that the reference lattice is anisotropically distorted. These distortions however, were introduced ad-hoc. In this work, we generalize the original Equivalent Crystal Theory by systematically introducing site-dependent directional distortions of the lattice, whose corresponding distortions account for the dependence of the energy on anisotropic local density variations. This is done in the spirit of the original framework, but including a gradient term in the density. This approach is introduced to correct a deficiency in the original Equivalent Crystal Theory and other semiempirical methods in quantitatively obtaining the correct ratios of the surface energies of low index planes of cubic metals (100), (110), and (111). We develop here the basic framework, and apply it to the calculation of Fe (110) and Fe (111) surface energy formation. The results, compared with first principles calculations, show an improvement over previous semiempirical approaches.

  12. ERA's Open Rotor Studies Including Shielding for Noise Reduction

    NASA Technical Reports Server (NTRS)

    Van Zante, Dale; Thomas, Russell

    2012-01-01

    The Open Rotor is a modern version of the UnDucted Fan (UDF) that was flight tested in the late 1980's through a partnership between NASA and General Electric (GE). Tests were conducted in the 9' x 15' Low Speed Wind Tunnel and the 8' x 6' Supersonic Wind Tunnel starting in late 2009 and completed in early 2012. Aerodynamic and acoustic data were obtained for takeoff, approach and cruise simulations. GE was the primary partner, but other organizations were involved such as Boeing and Airbus who provided additional hardware for fuselage simulations. This test campaign provided the acoustic and performance characteristics for modern open rotor blades designs." NASA and GE conducted joint systems analysis to evaluate how well new blade designs would perform on a B737 class aircraft, and compared the results to an advanced higher bypass ratio turbofan." Acoustic shielding experiments were performed at NASA GRC and Boeing LSAF facilities to provide data for noise estimates of unconventional aircraft configurations with Open Rotor propulsion systems." The work was sponsored by NASA's aeronautics programs, including the Subsonic Fixed Wing (SFW) and the Environmentally Responsible Aviation (ERA) projects."

  13. Effusion plate using additive manufacturing methods

    DOEpatents

    Johnson, Thomas Edward; Keener, Christopher Paul; Ostebee, Heath Michael; Wegerif, Daniel Gerritt

    2016-04-12

    Additive manufacturing techniques may be utilized to construct effusion plates. Such additive manufacturing techniques may include defining a configuration for an effusion plate having one or more internal cooling channels. The manufacturing techniques may further include depositing a powder into a chamber, applying an energy source to the deposited powder, and consolidating the powder into a cross-sectional shape corresponding to the defined configuration. Such methods may be implemented to construct an effusion plate having one or more channels with a curved cross-sectional geometry.

  14. HIP osteoarthritis and work.

    PubMed

    Harris, E Clare; Coggon, David

    2015-06-01

    Epidemiological evidence points strongly to a hazard of hip osteoarthritis from heavy manual work. Harmful exposures may be reduced by the elimination or redesign of processes and the use of mechanical aids. Reducing obesity might help to protect workers whose need to perform heavy lifting cannot be eliminated. Particularly high relative risks have been reported in farmers, and hip osteoarthritis is a prescribed occupational disease in the UK for long-term employees in agriculture. Even where it is not attributable to employment, hip osteoarthritis impacts importantly on the capacity to work. Factors that may influence work participation include the severity of disease, the physical demands of the job, age and the size of the employer. Published research does not provide a strong guide to the timing of return to work following hip arthroplasty for osteoarthritis, and it is unclear whether patients should avoid heavy manual tasks in their future employment. PMID:26612242

  15. HIP OSTEOARTHRITIS AND WORK

    PubMed Central

    Harris, E Clare; Coggon, David

    2016-01-01

    Epidemiological evidence points strongly to a hazard of hip osteoarthritis from heavy manual work. Harmful exposures may be reduced by elimination or redesign of processes and use of mechanical aids. Reducing obesity might help to protect workers whose need to perform heavy lifting cannot be eliminated. Particularly high relative risks have been reported in farmers, and hip osteoarthritis is a prescribed occupational disease in the UK for long-term employees in agriculture. Even where it is not attributable to employment, hip osteoarthritis impacts importantly on capacity to work. Factors that may influence work participation include the severity of disease, the physical demands of the job, age, and the size of the employer. Published research does not provide a strong guide to the timing of return to work following hip arthroplasty for osteoarthritis, and it is unclear whether patients should avoid heavy manual tasks in their future employment. PMID:26612242

  16. KSC's work flow assistant

    NASA Technical Reports Server (NTRS)

    Wilkinson, John; Johnson, Earl

    1991-01-01

    The work flow assistant (WFA) is an advanced technology project under the shuttle processing data management system (SPDMS) at Kennedy Space Center (KSC). It will be utilized for short range scheduling, controlling work flow on the floor, and providing near real-time status for all major space transportation systems (STS) work centers at KSC. It will increase personnel and STS safety and improve productivity through deeper active scheduling that includes tracking and correlation of STS and ground support equipment (GSE) configuration and work. It will also provide greater accessibility to this data. WFA defines a standards concept for scheduling data which permits both commercial off-the-shelf (COTS) scheduling tools and WFA developed applications to be reused. WFA will utilize industry standard languages and workstations to achieve a scalable, adaptable, and portable architecture which may be used at other sites.

  17. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  18. Extending ACNET communication types to include multicast semantics

    SciTech Connect

    Neswold, R.; King, C.; /Fermilab

    2009-10-01

    In Fermilab's accelerator control system, multicast communication wasn't properly incorporated into ACNET's transport layer, nor in its programming API. We present some recent work that makes multicasts naturally fit in the ACNET network environment. We also show how these additions provide high-availability for ACNET services.

  19. Intimate partner aggression and women's work outcomes.

    PubMed

    LeBlanc, Manon Mireille; Barling, Julian; Turner, Nick

    2014-10-01

    Using conservation of resources theory, we examined the relationship between intimate partner aggression enacted against heterosexual women and 3 types of work-related outcomes for these women: withdrawal while at work (i.e., cognitive distraction, work neglect), withdrawal from work (i.e., partial absenteeism, intentions to quit), and performance. In Study 1, we compared withdrawal both at and from work across 3 clinically categorized groups of women (n = 50), showing that experiencing physical aggression is related to higher work neglect. We replicated and extended these findings in Study 2 using a community sample of employed women (n = 249) by considering the incremental variance explained by both physical aggression and psychological aggression on these same outcomes. Results showed that physical aggression predicted higher levels of withdrawal both at and from work, with psychological aggression predicting additional variance in partial absenteeism over and above the effects of physical aggression. Study 3 extended the model to include academic performance as an outcome in a sample of female college students (n = 122) in dating relationships. Controlling for the women's conscientiousness, psychological aggression predicted lower academic performance after accounting for the effects of physical aggression. We discuss theoretical and practical implications of these results, as well as directions for future research. PMID:25068818

  20. Environmental Sustainability - Including Land and Water Use

    EPA Science Inventory

    Assessments of environmental sustainability can be conducted in many ways with one of the most quantitative methods including Life Cycle Impact Assessment (LCIA). While historically LCIA has included a comprehensive list of impact categories including: ozone depletion, global c...

  1. Spartanburg Technical College 1998 Work Force Development Survey.

    ERIC Educational Resources Information Center

    Quinley, John W.; Cantrell, Jo Ellen

    The 1998 Work Force Development Study focuses on Spartanburg Technical College's (STC's) (South Carolina) role in preparing new workers and training/retraining the current workforce. Surveys were mailed to employers in business and industry--the response rate was 10%. In addition, a series of focus groups, including various business, industry,…

  2. What's Old is New: Martha Graham Project Includes Archives, New Work.

    ERIC Educational Resources Information Center

    Manus, Susan

    1998-01-01

    Describes the acquisition of the archives of the late dancer/choreographer Martha Graham. Discusses the Library's financial support of Graham's classic ballet, "Appalachian Spring"; Graham's influence on dance; negotiations for the archives; materials in the archives; a commemorative performance; and the Martha Graham Legacy Project aimed at…

  3. Work and Family. Special Focus.

    ERIC Educational Resources Information Center

    Goetz, Kathy, Ed.

    1992-01-01

    This newsletter issue focuses on issues concerning families with both parents employed outside the home and describes several employer programs designed to help employees balance their work and family life. The newsletter includes the following articles: (1) "Work and Family: 1992"; (2) "Levi Strauss and Co.--A Work/Family Program in Action"; (3)…

  4. Readings in Work Evaluation--1.

    ERIC Educational Resources Information Center

    Pruitt, Walter A., Ed.

    The document is a collection of articles written by authors who are or have been work evaluators or closely associated with the process within a work evaluation rehabilitation facility. The papers are intended to broaden the scope of the available literature in the field of work evaluation. The articles include the following: The Professional in…

  5. Creating a Lunar EVA Work Envelope

    NASA Technical Reports Server (NTRS)

    Griffin, Brand N.; Howard, Robert; Rajulu, Sudhakar; Smitherman, David

    2009-01-01

    A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

  6. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    SciTech Connect

    C. Tsang

    2004-09-22

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  7. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  8. 75 FR 27313 - Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED PROCUREMENT LIST Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the... or Severely Disabled, Jefferson Plaza 2, Suite 10800, 1421 Jefferson Davis Highway,...

  9. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  10. Mobile working: positively engaging community nurses.

    PubMed

    Turner, Christopher

    2015-03-01

    Mobile working refers to a practitioner's ability to access information systems and applications while 'on the move'. This relatively new concept has yielded a number of benefits, including the ability to access patients' electronic records in real time and a reduction in travelling time for clinicians, thereby improving efficiency within community nursing practice. For a change in practice to be successful, it is necessary to ensure that the proposals are discussed with the staff group implementing them and that appropriate help and support are provided during the period of transition. Maintaining engagement with community nursing teams may be challenging due to increasing workloads and limited resources, potentially affecting health professionals' ability to attend workshops and associated events. Considering the specific needs of the workforce requires consideration and planning, including provision of additional support for members of staff who may lack confidence in working with mobile devices. PMID:25754781

  11. 36 CFR 1290.7 - Additional guidance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Section 1290.7 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK... ASSASSINATION RECORDS COLLECTION ACT OF 1992 (JFK ACT) § 1290.7 Additional guidance. (a) A government agency, office, or entity includes, for purposes of interpreting and implementing the JFK Act, all current,...

  12. Capacitive Proximity Sensors With Additional Driven Shields

    NASA Technical Reports Server (NTRS)

    Mcconnell, Robert L.

    1993-01-01

    Improved capacitive proximity sensors constructed by incorporating one or more additional driven shield(s). Sensitivity and range of sensor altered by adjusting driving signal(s) applied to shield(s). Includes sensing electrode and driven isolating shield that correspond to sensing electrode and driven shield.

  13. A Brain System for Auditory Working Memory

    PubMed Central

    Joseph, Sabine; Gander, Phillip E.; Barascud, Nicolas; Halpern, Andrea R.; Griffiths, Timothy D.

    2016-01-01

    The brain basis for auditory working memory, the process of actively maintaining sounds in memory over short periods of time, is controversial. Using functional magnetic resonance imaging in human participants, we demonstrate that the maintenance of single tones in memory is associated with activation in auditory cortex. In addition, sustained activation was observed in hippocampus and inferior frontal gyrus. Multivoxel pattern analysis showed that patterns of activity in auditory cortex and left inferior frontal gyrus distinguished the tone that was maintained in memory. Functional connectivity during maintenance was demonstrated between auditory cortex and both the hippocampus and inferior frontal cortex. The data support a system for auditory working memory based on the maintenance of sound-specific representations in auditory cortex by projections from higher-order areas, including the hippocampus and frontal cortex. SIGNIFICANCE STATEMENT In this work, we demonstrate a system for maintaining sound in working memory based on activity in auditory cortex, hippocampus, and frontal cortex, and functional connectivity among them. Specifically, our work makes three advances from the previous work. First, we robustly demonstrate hippocampal involvement in all phases of auditory working memory (encoding, maintenance, and retrieval): the role of hippocampus in working memory is controversial. Second, using a pattern classification technique, we show that activity in the auditory cortex and inferior frontal gyrus is specific to the maintained tones in working memory. Third, we show long-range connectivity of auditory cortex to hippocampus and frontal cortex, which may be responsible for keeping such representations active during working memory maintenance. PMID:27098693

  14. Room temperature and productivity in office work

    SciTech Connect

    Seppanen, O.; Fisk, W.J.; Lei, Q.H.

    2006-07-01

    Indoor temperature is one of the fundamental characteristics of the indoor environment. It can be controlled with a degree of accuracy dependent on the building and its HVAC system. The indoor temperature affects several human responses, including thermal comfort, perceived air quality, sick building syndrome symptoms and performance at work. In this study, we focused on the effects of temperature on performance at office work. We included those studies that had used objective indicators of performance that are likely to be relevant in office type work, such as text processing, simple calculations (addition, multiplication), length of telephone customer service time, and total handling time per customer for call-center workers. We excluded data from studies of industrial work performance. We calculated from all studies the percentage of performance change per degree increase in temperature, and statistically analyzed measured work performance with temperature. The results show that performance increases with temperature up to 21-22 C, and decreases with temperature above 23-24 C. The highest productivity is at temperature of around 22 C. For example, at the temperature of 30 C, the performance is only 91.1% of the maximum i.e. the reduction in performance is 8.9%.

  15. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  16. Additional Technologies and Investigations for Provision of Future Aeronautical Communications

    NASA Technical Reports Server (NTRS)

    Gilbert, Tricia; Jin, Jenny; Berger, Jason; Henriksen, Steve

    2008-01-01

    The following NASA Contractor Report documents the in-depth studies on select technologies that could support long-term aeronautical mobile communications operating concepts. This work was performed during the third and final phase of NASA s Technology Assessment for the Federal Aviation Administration (FAA)/EUROCONTROL Future Communications Study (FCS) under a multiyear NASA contract. It includes the associated findings of ITT Corporation and NASA Glenn Research Center to the FAA as of the end of May 2007. The activities documented in this report focus on three final technology candidates identified by the United States, and were completed before sufficient information about two additional technology candidates proposed by EUROCONTROL was made available. A separate report to be published by NASA/CR-2008-215144, entitled Final Report on Technology Investigations for Provision of Future Aeronautical Communications will include an assessment of all five final candidate technologies considered by the U.S. agencies (FAA and NASA) and EUROCONTROL. It will also provide an overview of the entire technology assessment process, including final recommendations. All three phases of this work were performed in compliance with the Terms of Reference for the Action Plan number 17 (AP-17) cooperative research agreement among EUROCONTROL, FAA, and NASA along with the general guidance of the FAA and EUROCONTROL available throughout this study.

  17. Work and Sleep—A Prospective Study of Psychosocial Work Factors, Physical Work Factors, and Work Scheduling

    PubMed Central

    Åkerstedt, Torbjörn; Garefelt, Johanna; Richter, Anne; Westerlund, Hugo; Magnusson Hanson, Linda L.; Sverke, Magnus; Kecklund, Göran

    2015-01-01

    Study Objectives: There is limited knowledge about the prospective relationship between major work characteristics (psychosocial, physical, scheduling) and disturbed sleep. The current study sought to provide such knowledge. Design: Prospective cohort, with measurements on two occasions (T1 and T2) separated by two years. Setting: Naturalistic study, Sweden. Participants: There were 4,827 participants forming a representative sample of the working population. Measurements and Results: Questionnaire data on work factors obtained on two occasions were analyzed with structural equation modeling. Competing models were compared in order to investigate temporal relationships. A reciprocal model was found to fit the data best. Sleep disturbances at T2 were predicted by higher work demands at T1 and by lower perceived stress at T1. In addition, sleep disturbances at T1 predicted subsequent higher perception of stress, higher work demands, lower degree of control, and less social support at work at T2. A cross-sectional mediation analysis showed that (higher) perceived stress mediated the relationship between (higher) work demands and sleep disturbances; however, no such association was found longitudinally. Conclusions: Higher work demands predicted disturbed sleep, whereas physical work characteristics, shift work, and overtime did not. In addition, disturbed sleep predicted subsequent higher work demands, perceived stress, less social support, and lower degree of control. The results suggest that remedial interventions against sleep disturbances should focus on psychosocial factors, and that such remedial interventions may improve the psychosocial work situation in the long run. Citation: Åkerstedt T, Garefelt J, Richter A, Westerlund H, Magnusson LL, Sverke M, Kecklund G. Work and sleep—a prospective study of psychosocial work factors, physical work factors, and work scheduling. SLEEP 2015;38(7):1129–1136. PMID:26118559

  18. Working Hours Flexibility. Background Paper No. 30.

    ERIC Educational Resources Information Center

    Staines, Graham L.

    Flexible work schedules offer the promise of a low-cost option for helping people manage work and family responsibilities. Alternative work schedules include part-time work, job sharing, work sharing, shiftwork, compressed work week, flexitime, and flexiplace. Flexitime is the most prevalent full-time flexible schedule and is second in prevalence…

  19. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  20. Evaluation of certain food additives and contaminants.

    PubMed

    2001-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives and contaminants (including flavouring agents), and the establishment and revision of specifications. A summary follows of the Committee's evaluations of toxicological data on various specific food additives (furfural, paprika oleoresin, caramel colour II, cochineal extract, carmines, aspartame-acesulfame salt, D-tagatose, benzoyl peroxide, nitrous oxide, stearyl tartrate and trehalose), flavouring agents and contaminants (cadmium and tin), and of intake data on calcium from calcium salts of food additives. Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired. PMID:11588830

  1. Evaluation of certain food additives and contaminants.

    PubMed

    2002-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants, with a view to recommending Acceptable Daily Intakes (ADIs) and tolerable intakes, respectively, and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (diacetyltartaric and fatty acid esters of glycerol, quillaia extracts, invertase from Saccharomyces cerevisiae, beta-carotene from Blakeslea trispora, curcumin, phosphates, diphosphates and polyphosphates, hydrogenated poly-1-decene, natamycin, D-tagatose, carrageenan, processed Eucheuma seaweed, curdlan, acetylated oxidized starch, alpha-cyclodextrin and sodium sulfate), flavouring agents and contaminants (3-chloro-1,2-propanediol, 1,3-dichloro-2-propanol, and a large number of polychlorinated dibenzodioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives and tolerable intakes of the contaminants considered, changes in the status of specifications of these food additives and specific flavouring agents, and further information required or desired. PMID:12564044

  2. 48 CFR 1836.213-370 - Additive and deductive items.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Additive and deductive... Special Aspects of Contracting for Construction 1836.213-370 Additive and deductive items. When it appears... the work generally as specified and one or more additive or deductive bid items progressively...

  3. 48 CFR 1436.571 - Additive and deductive items.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Additive and deductive... Additive and deductive items. If it appears that funds available for a construction project may be... the work as specified and for one or more additive or deductive bid items which add or omit...

  4. 48 CFR 1836.213-370 - Additive and deductive items.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Additive and deductive... Special Aspects of Contracting for Construction 1836.213-370 Additive and deductive items. When it appears... the work generally as specified and one or more additive or deductive bid items progressively...

  5. 48 CFR 1436.571 - Additive and deductive items.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Additive and deductive... Additive and deductive items. If it appears that funds available for a construction project may be... the work as specified and for one or more additive or deductive bid items which add or omit...

  6. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  7. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  8. 48 CFR 252.247-7020 - Additional services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Additional services. 252... Provisions And Clauses 252.247-7020 Additional services. As prescribed in 247.270-3(o), use the following clause: Additional Services (AUG 2000) The Contractor shall provide additional services not included...

  9. 48 CFR 252.247-7020 - Additional services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Additional services. 252... Provisions And Clauses 252.247-7020 Additional services. As prescribed in 247.270-3(o), use the following clause: Additional Services (AUG 2000) The Contractor shall provide additional services not included...

  10. Phase diagrams for the adsorption of monomers with non-additive interactions

    NASA Astrophysics Data System (ADS)

    Pinto, O. A.; Ramirez-Pastor, A. J.; Nieto, F.

    2016-09-01

    In several experimental systems phase diagrams coverage-temperature show a strong asymmetry. This behavior can be reproduced by including non-additive lateral interactions. In this work a Monte Carlo study on the canonical assembly of the criticality of monomer adsorption with non-additive interactions is presented. Traditional pairwise energies were replaced by other more general ones where the lateral interaction between two ad-atoms depends on the coverage at first sphere of coordination. This kind of energies includes multibody interactions like three-body interactions and four-body interactions, etc. These energies induce the formation of several non-additive ordered structures. Finite size scaling method was used to classify the order of phase transition of each non-additive phase. On the other hand, the corresponding phase diagrams are formed naturally, in which case the diagrams show strong asymmetries.

  11. Evaporative cooler including one or more rotating cooler louvers

    DOEpatents

    Gerlach, David W

    2015-02-03

    An evaporative cooler may include an evaporative cooler housing with a duct extending therethrough, a plurality of cooler louvers with respective porous evaporative cooler pads, and a working fluid source conduit. The cooler louvers are arranged within the duct and rotatably connected to the cooler housing along respective louver axes. The source conduit provides an evaporative cooler working fluid to the cooler pads during at least one mode of operation.

  12. Working Memory and Neurofeedback.

    PubMed

    YuLeung To, Eric; Abbott, Kathy; Foster, Dale S; Helmer, D'Arcy

    2016-01-01

    Impairments in working memory are typically associated with impairments in other cognitive faculties such as attentional processes and short-term memory. This paper briefly introduces neurofeedback as a treatment modality in general, and, more specifically, we review several of the current modalities successfully used in neurofeedback (NF) for the treatment of working memory deficits. Two case studies are presented to illustrate how neurofeedback is applied in treatment. The development of Low Resolution Electromagnetic Tomography (LORETA) and its application in neurofeedback now makes it possible to specifically target deep cortical/subcortical brain structures. Developments in neuroscience concerning neural networks, combined with highly specific yet practical NF technologies, makes neurofeedback of particular interest to neuropsychological practice, including the emergence of specific methodologies for treating very difficult working memory (WM) problems. PMID:27191218

  13. Uranium hydrogeochemical and stream sediment reconnasissance of the Trinidad NTMS Quadrangle, Colorado, including concentrations of forty-two additional elements

    SciTech Connect

    Shannon, S.S. Jr.

    1980-05-01

    Uranium and other elemental data resulting from the Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) of the Trinidad National Topographic Map Series (NTMS) quadrangle, Colorado, by the Los Alamos Scientific Laboratory (LASL) are reported herein. This study was conducted as part of the United States Department of Energy's National Uranium Resource Evaluation (NURE), which is designed to provide improved estimates of the availability and economics of nuclear fuel resources and to make available to industry information for use in exploration and development of uranium resources. The HSSR data will ultimately be integrated with other NURE data (e.g., airborne radiometric surveys and geological investigations) to complete the entire NURE program. This report is a supplement to the HSSR uranium evaluation report for the Trinidad quadrange (Morris et al, 1978), which presented the field and uranium data for the 1060 water and 1240 sediment samples collected from 1768 locations in the quadrangle. The earlier report contains an evaluation of the uranium concentrations of the samples as well as descriptions of the geology, hydrology, climate, and uranium occurrences of the quadrange. This supplement presents the sediment field and uranium data again and the analyses of 42 other elements in the sediments. All uranium samples were redetermined by delayed-neutron counting (DNC) when the sediment samples were analyzed for 31 elements by neutron activation. For 99.6% of the sediment samples analyzed, the differences between the uranium contents first determined (Morris et al, 1978) and the analyses reported herein are less than 10%.

  14. 78 FR 35929 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-14

    ... decision identifying water quality limited segments and associated pollutants in Indiana to be listed... pollution controls are not stringent enough to attain or maintain state water quality standards and for... certain water quality limited segments and associated pollutants (Table 1 in Appendix A1 of EPA's...

  15. 78 FR 56695 - Proposed Listing of Additional Waters To Be Included on Indiana's 2010 List of Impaired Waters...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-13

    ... EPA's proposed decision identifying water quality limited segments and associated pollutants in Indiana to be listed pursuant to the Clean Water Act Section 303(d)(2), and requests public comment. For... Under the Clean Water Act AGENCY: Environmental Protection Agency (EPA). ACTION: Reopening of...

  16. 78 FR 77666 - Notice and Request for Public Comment on State Requests To Include Additional Proof-of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ...-Dyson, Director, Office of Research, Policy, and Programs, at (301) 563-3919 or 1-866- 747-1471 (toll... regulations on the Federal Form in 1994. NVRA Final Rule Notice, 59 FR 32,311 (June 23, 1994). In the Help... transferred to the EAC. 42 U.S.C. 15532. The EAC's discretion in developing the content of the Federal Form...

  17. 77 FR 1073 - Privacy Act of 1974; Report of an Altered System of Records, Including Addition of Routine Uses...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-09

    ...The Food and Drug Administration (FDA) is announcing an alteration to an existing System of Records (System) titled ``Bioresearch Monitoring Information System, HHS/FDA'' (System No. 09- 10-0010). Among other updates, this alteration adds new routine uses for disclosures of certain relevant information to Agencies, authorities, and organizations with responsibilities related to clinical......

  18. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    NASA Astrophysics Data System (ADS)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    The dilemma of designing an advanced undergraduate laboratory lies in the desire to teach and reinforce basic principles and techniques while at the same time exposing students to the excitement of research. We report here on a one-semester, project-based biochemistry laboratory that combines the best features of a cookbook approach (high success rate, achievement of defined goals) with those of an investigative, discovery-based approach (student involvement in the experimental design, excitement of real research). Individual modules may be selected and combined to meet the needs of different courses and different institutions. The central theme of this lab is protein purification and design. This laboratory accompanies the first semester of biochemistry (Structure and Function of Macromolecules, a course taken mainly by junior and senior chemistry and biological chemistry majors). The protein chosen as the object of study is the enzyme lysozyme, which is utilized in all projects. It is suitable for a student lab because it is easily and inexpensively obtained from egg white and is extremely stable, and its high isoelectric point (pI = 11) allows for efficient separation from other proteins by ion-exchange chromatography. Furthermore, a literature search conducted by the resourceful student reveals a wealth of information, since lysozyme has been the subject of numerous studies. It was the first enzyme whose structure was determined by crystallography (1). Hendrickson et al. (2) have previously described an intensive one-month laboratory course centered around lysozyme, although their emphasis is on protein stability rather than purification and engineering. Lysozyme continues to be the focus of much exciting new work on protein folding and dynamics, structure and activity (3 - 5). This lab course includes the following features: (i) reinforcement of basic techniques, such as preparation of buffers, simple enzyme kinetics, and absorption spectroscopy; (ii

  19. Article Including Environmental Barrier Coating System

    NASA Technical Reports Server (NTRS)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  20. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  1. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  2. Managing Work and Family. Nonstandard Work Arrangements among Managers and Professionals.

    ERIC Educational Resources Information Center

    Spalter-Roth, Roberta M.; Kalleberg, Arne L.; Rasell, Edith; Cassirer, Naomi; Reskin, Barbara F.; Hudson, Ken; Webster, David; Appelbaum, Eileen; Dooley, Betty L.

    With more mothers in the work force and greater stresses created by competing demands of work and home, nonstandard work arrangements (NSWAs), which include temporary help agency work, on-call work, day labor, contract work, independent contracting, self-employment, and part-time work, have been suggested as a remedy for this conflict. For the…

  3. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  4. Redefining women's work during pregnancy: toward a more comprehensive approach.

    PubMed

    DeJoseph, J F

    1993-06-01

    The potential effects of work and activity on the processes and outcomes of pregnancy should be assessed when a woman's care plan is developed. Perinatal caregivers are limited by a narrow definition of work that encompasses only employment. This commentary expands the description of women's work during pregnancy, and proposes the addition of some activities not currently considered in most prenatal assessments, including home care responsibilities, the maintenance and development of intimate relationships, and the tasks identified with becoming a mother. All this has implications for research, clinical practice, and public and health policy. PMID:8240612

  5. Instrumentation Working Group Summary

    NASA Technical Reports Server (NTRS)

    Zaller, Michelle; Miake-Lye, Richard

    1999-01-01

    The Instrumentation Working Group compiled a summary of measurement techniques applicable to gas turbine engine aerosol precursors and particulates. An assessment was made of the limits, accuracy, applicability, and technology readiness of the various techniques. Despite advances made in emissions characterization of aircraft engines, uncertainties still exist in the mechanisms by which aerosols and particulates are produced in the near-field engine exhaust. To adequately assess current understanding of the formation of sulfuric acid aerosols in the exhaust plumes of gas turbine engines, measurements are required to determine the degree and importance of sulfur oxidation in the turbine and at the engine exit. Ideally, concentrations of all sulfur species would be acquired, with emphasis on SO2 and SO3. Numerous options exist for extractive and non-extractive measurement of SO2 at the engine exit, most of which are well developed. SO2 measurements should be performed first to place an upper bound on the percentage of SO2 oxidation. If extractive and non-extractive techniques indicate that a large amount of the fuel sulfur is not detected as SO2, then efforts are needed to improve techniques for SO3 measurements. Additional work will be required to account for the fuel sulfur in the engine exhaust. Chemical Ionization Mass Spectrometry (CI-MS) measurements need to be pursued, although a careful assessment needs to be made of the sampling line impact on the extracted sample composition. Efforts should also be placed on implementing non-intrusive techniques and extending their capabilities by maximizing exhaust coverage for line-of-sight measurements, as well as development of 2-D techniques, where feasible. Recommendations were made to continue engine exit and combustor measurements of particulates. Particulate measurements should include particle size distribution, mass fraction, hydration properties, and volatile fraction. However, methods to ensure that unaltered

  6. Evaluation of certain food additives and contaminants.

    PubMed

    2004-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, with a view to recommending acceptable daily intakes (ADIs) and to prepare specifications for the identity and purity of food additives. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of food additives (including flavouring agents) and contaminants, assessments of intake, and the establishment and revision of specifications for food additives. A summary follows of the Committee's evaluations of toxicological and intake data on various specific food additives (alpha-amylase from Bacillus lichenformis containing a genetically engineered alpha-amylase gene from B. licheniformis, annatto extracts, curcumin, diacetyl and fatty acid esters of glycerol, D-tagatose, laccase from Myceliophthora thermophila expressed in Aspergillus oryzae, mixed xylanase, beta-glucanase enzyme preparation produced by a strain of Humicola insolens, neotame, polyvinyl alcohol, quillaia extracts and xylanase from Thermomyces lanuginosus expressed in Fusarium venenatum), flavouring agents, a nutritional source of iron (ferrous glycinate, processed with citric acid), a disinfectant for drinking-water (sodium dichloroisocyanurate) and contaminants (cadmium and methylmercury). Annexed to the report are tables summarizing the Committee's recommendations for ADIs of the food additives, recommendations on the flavouring agents considered, and tolerable intakes of the contaminants considered, changes in the status of specifications and further information requested or desired. PMID:15354533

  7. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  8. Protoplanetary Disks Including Radiative Feedback from Accreting Planets

    NASA Astrophysics Data System (ADS)

    Montesinos, Matías; Cuadra, Jorge; Perez, Sebastian; Baruteau, Clément; Casassus, Simon

    2015-06-01

    While recent observational progress is converging on the detection of compact regions of thermal emission due to embedded protoplanets, further theoretical predictions are needed to understand the response of a protoplanetary disk to the radiative feedback from planet formation. This is particularly important to make predictions for the observability of circumplanetary regions. In this work we use 2D hydrodynamical simulations to examine the evolution of a viscous protoplanetary disk in which a luminous Jupiter-mass planet is embedded. We use an energy equation that includes the radiative heating of the planet as an additional mechanism for planet formation feedback. Several models are computed for planet luminosities ranging from 10-5 to 10-3 solar luminosities. We find that the planet radiative feedback enhances the disk’s accretion rate at the planet’s orbital radius, producing a hotter and more luminous environement around the planet, independently of the prescription used to model the disk’s turbulent viscosity. We also estimate the thermal signature of the planet feedback for our range of planet luminosities, finding that the emitted spectrum of a purely active disk, without passive heating, is appreciably modified in the infrared. We simulate the protoplanetary disk around HD 100546 where a planet companion is located at about 68 AU from the star. Assuming the planet mass is five Jupiter masses and its luminosity is ˜ 2.5× {10}-4 {L}⊙ , we find that the radiative feedback of the planet increases the luminosity of its ˜5 AU circumplanetary disk from {10}-5 {L}⊙ (without feedback) to {10}-3 {L}⊙ , corresponding to an emission of ˜ 1 {mJy} in the {L}\\prime band after radiative transfer calculations, a value that is in good agreement with HD 100546b observations.

  9. Subsea approach to work systems development

    NASA Technical Reports Server (NTRS)

    Gernhardt, M. L.; Frisbie, F. R.; Brown, C. E.

    1988-01-01

    Self-contained undersea working environments with applications to space station EVA environments are discussed. Physiological limitations include decompression, inert gas narcosis, high-pressure nervous system, gas toxicity, and thermal limitations. Work task requirements include drilling support, construction, inspection, and repair. Work systems include hyperbaric diving, atmospheric work systems, tele-operated work systems, and hybrid systems. Each type of work system is outlined in terms of work capabilities, special interface requirements, and limitations. Various operational philosophies are discussed. The evolution of work systems in the subsea industry has been the result of direct operational experience in a competitive market.

  10. The grays of medical device color additives.

    PubMed

    Seidman, Brenda

    2014-01-01

    The United States' medical device color additive regulations are unknown to some, and confusing to many. This article reviews statutory language on color additives in the Federal Food, Drug, and Cosmetic Act (FFDCA), as amended, including the Delaney Clause on carcinogenicity; color additive regulatory language as it relates to medical devices in Title 21 of the Code of Federal Regulations (C.F.R.), Parts 70-82; reports on the Food and Drug Administration's (FDA's) likely current and historical practices in dealing with color additives in medical devices; and speculates on what may have given rise to decades of seemingly ad hoc color additives practices, which may now be difficult to reconstruct and satisfactorily modify. Also addressed is the Center for Devices and Radiological Health's (CDRH's) recent publicly-vetted approach to color additives in Section 7 of its April 2013 draft guidance, Use of International Standard ISO-10993, "Biological Evaluation of Medical Devices Part 1: Evaluation and Testing," which the author concludes is a change in the right direction, but which, at least in its current draft form, is not a fix to the CDRH's color additives dilemma. Lastly, the article suggests what the CDRH might consider in further developing a new approach to color additives. Such an approach would treat color additives as if they were any other potentially toxic group of chemicals, and could be fashioned in such a way that the CDRH could still satisfy the broad aspects of Congressional color additives mandates, and.yet be consistent with ISO 10993. In doing this, the CDRH would need to recommend a more directed use of its Quality System Regulation, 21 C.F.R. Part 820, for material and vendor qualification and validation in general; approach Congress for needed statutory changes; or make administrative changes. In order for any approach to be successful, whether it is a new twist on past practices, or an entirely new path forward, the FDA must, to the best of its

  11. Instrumentation Working Group Summary

    NASA Technical Reports Server (NTRS)

    Zaller, Michelle; Miake-Lye, Richard

    1999-01-01

    The Instrumentation Working Group compiled a summary of measurement techniques applicable to gas turbine engine aerosol precursors and particulates. An assessment was made of the limits, accuracy, applicability, and technology readiness of the various techniques. Despite advances made in emissions characterization of aircraft engines, uncertainties still exist in the mechanisms by which aerosols and particulates are produced in the near-field engine exhaust. To adequately assess current understanding of the formation of sulfuric acid aerosols in the exhaust plumes of gas turbine engines, measurements are required to determine the degree and importance of sulfur oxidation in the turbine and at the engine exit. Ideally, concentrations of all sulfur species would be acquired, with emphasis on SO2 and SO3. Numerous options exist for extractive and non-extractive measurement of SO2 at the engine exit, most of which are well developed. SO2 measurements should be performed first to place an upper bound on the percentage of SO2 oxidation. If extractive and non-extractive techniques indicate that a large amount of the fuel sulfur is not detected as SO2, then efforts are needed to improve techniques for SO3 measurements. Additional work will be required to account for the fuel sulfur in the engine exhaust. Chemical Ionization Mass Spectrometry (CI-MS) measurements need to be pursued, although a careful assessment needs to be made of the sampling line impact on the extracted sample composition. Efforts should also be placed on implementing non-intrusive techniques and extending their capabilities by maximizing exhaust coverage for line-of-sight measurements, as well as development of 2-D techniques, where feasible. Recommendations were made to continue engine exit and combustor measurements of particulates. Particulate measurements should include particle size distribution, mass fraction, hydration properties, and volatile fraction. However, methods to ensure that unaltered

  12. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  13. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  14. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  15. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  16. Silage Additives and Management Issues

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inoculants are the most common silage additives in the United States. These products contain lactic acid bacteria to supplement the lactic acid bacteria naturally on the crop and help insure a consistent fermentation in the silo. There are three types of inoculants: homofermentative lactic acid bact...

  17. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  18. Composite Pressure Vessel Including Crack Arresting Barrier

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas K. (Inventor)

    2013-01-01

    A pressure vessel includes a ported fitting having an annular flange formed on an end thereof and a tank that envelopes the annular flange. A crack arresting barrier is bonded to and forming a lining of the tank within the outer surface thereof. The crack arresting barrier includes a cured resin having a post-curing ductility rating of at least approximately 60% through the cured resin, and further includes randomly-oriented fibers positioned in and throughout the cured resin.

  19. Production scheduling with discrete and renewable additional resources

    NASA Astrophysics Data System (ADS)

    Kalinowski, K.; Grabowik, C.; Paprocka, I.; Kempa, W.

    2015-11-01

    In this paper an approach to planning of additional resources when scheduling operations are discussed. The considered resources are assumed to be discrete and renewable. In most research in scheduling domain, the basic and often the only type of regarded resources is a workstation. It can be understood as a machine, a device or even as a separated space on the shop floor. In many cases, during the detailed scheduling of operations the need of using more than one resource, required for its implementation, can be indicated. Resource requirements for an operation may relate to different resources or resources of the same type. Additional resources are most often referred to these human resources, tools or equipment, for which the limited availability in the manufacturing system may have an influence on the execution dates of some operations. In the paper the concept of the division into basic and additional resources and their planning method was shown. A situation in which sets of basic and additional resources are not separable - the same additional resource may be a basic resource for another operation is also considered. Scheduling of operations, including greater amount of resources can cause many difficulties, depending on whether the resource is involved in the entire time of operation, only in the selected part(s) of operation (e.g. as auxiliary staff at setup time) or cyclic - e.g. when an operator supports more than one machine, or supervises the execution of several operations. For this reason the dates and work times of resources participation in the operation can be different. Presented issues are crucial when modelling of production scheduling environment and designing of structures for the purpose of scheduling software development.

  20. An adaptive additive inflation scheme for Ensemble Kalman Filters

    NASA Astrophysics Data System (ADS)

    Sommer, Matthias; Janjic, Tijana

    2016-04-01

    Data assimilation for atmospheric dynamics requires an accurate estimate for the uncertainty of the forecast in order to obtain an optimal combination with available observations. This uncertainty has two components, firstly the uncertainty which originates in the the initial condition of that forecast itself and secondly the error of the numerical model used. While the former can be approximated quite successfully with an ensemble of forecasts (an additional sampling error will occur), little is known about the latter. For ensemble data assimilation, ad-hoc methods to address model error include multiplicative and additive inflation schemes, possibly also flow-dependent. The additive schemes rely on samples for the model error e.g. from short-term forecast tendencies or differences of forecasts with varying resolutions. However since these methods work in ensemble space (i.e. act directly on the ensemble perturbations) the sampling error is fixed and can be expected to affect the skill substiantially. In this contribution we show how inflation can be generalized to take into account more degrees of freedom and what improvements for future operational ensemble data assimilation can be expected from this, also in comparison with other inflation schemes.

  1. Overview of Materials Qualification Needs for Metal Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Seifi, Mohsen; Salem, Ayman; Beuth, Jack; Harrysson, Ola; Lewandowski, John J.

    2016-03-01

    This overview highlights some of the key aspects regarding materials qualification needs across the additive manufacturing (AM) spectrum. AM technology has experienced considerable publicity and growth in the past few years with many successful insertions for non-mission-critical applications. However, to meet the full potential that AM has to offer, especially for flight-critical components (e.g., rotating parts, fracture-critical parts, etc.), qualification and certification efforts are necessary. While development of qualification standards will address some of these needs, this overview outlines some of the other key areas that will need to be considered in the qualification path, including various process-, microstructure-, and fracture-modeling activities in addition to integrating these with lifing activities targeting specific components. Ongoing work in the Advanced Manufacturing and Mechanical Reliability Center at Case Western Reserve University is focusing on fracture and fatigue testing to rapidly assess critical mechanical properties of some titanium alloys before and after post-processing, in addition to conducting nondestructive testing/evaluation using micro-computerized tomography at General Electric. Process mapping studies are being conducted at Carnegie Mellon University while large area microstructure characterization and informatics (EBSD and BSE) analyses are being conducted at Materials Resources LLC to enable future integration of these efforts via an Integrated Computational Materials Engineering approach to AM. Possible future pathways for materials qualification are provided.

  2. Facilities removal working group

    SciTech Connect

    1997-03-01

    This working group`s first objective is to identify major economic, technical, and regulatory constraints on operator practices and decisions relevant to offshore facilities removal. Then, the group will try to make recommendations as to regulatory and policy adjustments, additional research, or process improvements and/or technological advances, that may be needed to improve the efficiency and effectiveness of the removal process. The working group will focus primarily on issues dealing with Gulf of Mexico platform abandonments. In order to make the working group sessions as productive as possible, the Facilities Removal Working Group will focus on three topics that address a majority of the concerns and/or constraints relevant to facilities removal. The three areas are: (1) Explosive Severing and its Impact on Marine Life, (2) Pile and Conductor Severing, and (3) Deep Water Abandonments This paper will outline the current state of practice in the offshore industry, identifying current regulations and specific issues encountered when addressing each of the three main topics above. The intent of the paper is to highlight potential issues for panel discussion, not to provide a detailed review of all data relevant to the topic. Before each panel discussion, key speakers will review data and information to facilitate development and discussion of the main issues of each topic. Please refer to the attached agenda for the workshop format, key speakers, presentation topics, and panel participants. The goal of the panel discussions is to identify key issues for each of the three topics above. The working group will also make recommendations on how to proceed on these key issues.

  3. Does finger sense predict addition performance?

    PubMed

    Newman, Sharlene D

    2016-05-01

    The impact of fingers on numerical and mathematical cognition has received a great deal of attention recently. However, the precise role that fingers play in numerical cognition is unknown. The current study explores the relationship between finger sense, arithmetic and general cognitive ability. Seventy-six children between the ages of 5 and 12 participated in the study. The results of stepwise multiple regression analyses demonstrated that while general cognitive ability including language processing was a predictor of addition performance, finger sense was not. The impact of age on the relationship between finger sense, and addition was further examined. The participants were separated into two groups based on age. The results showed that finger gnosia score impacted addition performance in the older group but not the younger group. These results appear to support the hypothesis that fingers provide a scaffold for calculation and that if that scaffold is not properly built, it has continued differential consequences to mathematical cognition. PMID:26993292

  4. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  5. Ionic Liquids with Ammonium Cations as Lubricants or Additives

    SciTech Connect

    Qu, Jun; Blau, Peter Julian; Dai, Sheng; Luo, Huimin; Truhan, Jr., John J

    2006-01-01

    Friction and wear are estimated to cost 6% of the US gross national product, or around $700 billion annually. A new class of more effective lubricants could lead to huge energy savings. Limited recent literature has suggested potential for using room-temperature ionic liquids as lubricants, however only a few out of millions (or more) of species have been evaluated. Recent ORNL work discovered a new category of ionic liquids with ammonium cations that have demonstrated promising lubricating properties as net lubricants or lubricant additives, particularly in lubricating difficult-to-lubricate metals like aluminum. More than 30% friction reduction has been observed on ammonium-based ionic liquids compared to conventional hydrocarbon oils. The inherent polarity of ionic liquids is believed to provide strong adhesion to contact surfaces and form a boundary lubricating film leading to friction and wear reductions. Other advantages of ionic liquids include (1) negligible volatility, (2) high thermal stability, (3) non-flammability, and (4) better intrinsic properties that eliminate the necessity of many expensive lubricant additives. With very flexible molecular structures, this new class of lubricants, particularly ammonium-based ionic liquids, can be tailored to fit a big variety of applications including but not limited to bearings, combustion engines, MEMS, and metal forming.

  6. 47 CFR 65.820 - Included items.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 3 2013-10-01 2013-10-01 false Included items. 65.820 Section 65.820... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.820 Included items. (a... allowance either by performing a lead-lag study of interstate revenue and expense items or by using...

  7. 47 CFR 65.820 - Included items.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 3 2014-10-01 2014-10-01 false Included items. 65.820 Section 65.820... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.820 Included items. (a... allowance either by performing a lead-lag study of interstate revenue and expense items or by using...

  8. 47 CFR 65.820 - Included items.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 3 2012-10-01 2012-10-01 false Included items. 65.820 Section 65.820... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.820 Included items. (a... allowance either by performing a lead-lag study of interstate revenue and expense items or by using...

  9. 47 CFR 65.820 - Included items.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 3 2011-10-01 2011-10-01 false Included items. 65.820 Section 65.820 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.820 Included items....

  10. 47 CFR 65.820 - Included items.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Included items. 65.820 Section 65.820 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERSTATE RATE OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Rate Base § 65.820 Included items....

  11. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... below 470 MHz, including those licensed pursuant to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band... Spectrum Leasing Scope and Authority § 1.9005 Included services. Link to an amendment published at 79 FR 48533, August 15, 2014. The spectrum leasing policies and rules of this subpart apply to the...

  12. 46 CFR 169.556 - Work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Work vests. 169.556 Section 169.556 Shipping COAST GUARD... Firefighting Equipment Additional Lifesaving Equipment § 169.556 Work vests. (a) Buoyant work vests carried.... (b) Approved buoyant work vests are items of safety apparel and may be carried aboard vessels to...

  13. 46 CFR 169.556 - Work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Work vests. 169.556 Section 169.556 Shipping COAST GUARD... Firefighting Equipment Additional Lifesaving Equipment § 169.556 Work vests. (a) Buoyant work vests carried.... (b) Approved buoyant work vests are items of safety apparel and may be carried aboard vessels to...

  14. 46 CFR 169.556 - Work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Work vests. 169.556 Section 169.556 Shipping COAST GUARD... Firefighting Equipment Additional Lifesaving Equipment § 169.556 Work vests. (a) Buoyant work vests carried.... (b) Approved buoyant work vests are items of safety apparel and may be carried aboard vessels to...

  15. 46 CFR 169.556 - Work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Work vests. 169.556 Section 169.556 Shipping COAST GUARD... Firefighting Equipment Additional Lifesaving Equipment § 169.556 Work vests. (a) Buoyant work vests carried.... (b) Approved buoyant work vests are items of safety apparel and may be carried aboard vessels to...

  16. 46 CFR 169.556 - Work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Work vests. 169.556 Section 169.556 Shipping COAST GUARD... Firefighting Equipment Additional Lifesaving Equipment § 169.556 Work vests. (a) Buoyant work vests carried.... (b) Approved buoyant work vests are items of safety apparel and may be carried aboard vessels to...

  17. Metrology Needs for Metal Additive Manufacturing Powders

    NASA Astrophysics Data System (ADS)

    Slotwinski, John A.; Garboczi, Edward J.

    2015-03-01

    Additive manufacturing (AM) processes can produce highly complex and customized parts without the need for dedicated tooling and can produce parts directly from the part design information. These types of processes are poised to revolutionize the manufacturing industry, yet several challenges are currently preventing more widespread adoption of AM technologies. Among these challenges are metrology issues associated with the measurement and characterization of the metal powders used for AM systems. This article will describe the technical challenges and needs for characterizing metal AM powders, recent research efforts to address those needs, and current work to standardize characterization methods in ASTM and ISO, such as the recently released ASTM F3049, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes.

  18. The addition of disilanes to cumulenes

    SciTech Connect

    Chen, Y.

    1997-10-08

    The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

  19. 7. WEST PORTAL. NOTE DECORATIVE ELEMENTS, INCLUDING DECORATIVE CAPS COVERING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. WEST PORTAL. NOTE DECORATIVE ELEMENTS, INCLUDING DECORATIVE CAPS COVERING COMPRESSION BLOCKS. NAME OF THE BRIDGE COMPANY WITH HERALDIC CARTOUCHE BEARING NAMES OF THREE COUNTY COMMISSIONERS BELOW, AND OPEN SCROLL WORK IN WROUGHT IRON. - Peevy Road Bridge, Peevy Road spanning Perkiomen Creek in Upper Hanover Township, East Greenville, Montgomery County, PA

  20. Payment Services for Global Online Systems Including Internet.

    ERIC Educational Resources Information Center

    Seebeck, Bill; And Others

    1995-01-01

    A panel of four conference presenters address issues related to paying for services provided through online systems. Discussion includes the following topics: metering devices; electronic/digital cash; working within existing banking/credit card structures; provision of payment mechanisms in countries without extensive credit card usage; and…

  1. The Work, the Workplace, and the Work Force of Tomorrow.

    ERIC Educational Resources Information Center

    Allen, Claudia

    1995-01-01

    Ann McLaughlin, a former secretary of labor, discusses her views on the future of the workplace. She feels that to solve the impending problem of educational deficits among the work force, employers will begin their own educational programs, improving both employee loyalty and work force mobility. Includes predictions for future growth fields.…

  2. New technology recipes include horseradish, vinegar, mushrooms

    SciTech Connect

    Bishop, J.

    1995-08-01

    Technology development for more effective environmental management continues to abound. This article contains some recent innovations in the following areas: wastewater treatment; site remediation; and air pollution control. In addition several emerging technologies address solid and hazardous waste management with techniques designed to reduce waste volume, recycle valuable materials and create new energy sources.

  3. Go! Including Movement during Routines and Transitions

    ERIC Educational Resources Information Center

    Orlowski, Marietta A.; Hart, Aaron

    2010-01-01

    Good schools for children ages 5 to 8 provide multiple opportunities for physical activity throughout the school day. Ideally, physical education, recess, extracurricular activities, and classroom activities together help ensure that children meet the recommended 60 minutes a day of structured activity and 60 of unstructured. Additionally, brief…

  4. The Director's Toolbox for Including Children with Special Needs

    ERIC Educational Resources Information Center

    Barker, Linda; Goldberg, Roberta

    2012-01-01

    Directors of early childhood programs are the "frontline" for parents seeking admission for their children with identified special needs. In addition, developmental and behavioral issues that emerge after a child is enrolled in a program quickly come to the director's attention. Determining who can be included at a site, how to prepare the…

  5. Additional Drive Circuitry for Piezoelectric Screw Motors

    NASA Technical Reports Server (NTRS)

    Smythe, Robert; Palmer, Dean; Gursel, Yekta; Reder, Leonard; Savedra, Raymond

    2004-01-01

    Modules of additional drive circuitry have been developed to enhance the functionality of a family of commercially available positioning motors (Picomotor . or equivalent) that provide linear motion controllable, in principle, to within increments .30 nm. A motor of this type includes a piezoelectric actuator that turns a screw. Unlike traditional piezoelectrically actuated mechanisms, a motor of this type does not rely on the piezoelectric transducer to hold position: the screw does not turn except when the drive signal is applied to the actuator.

  6. Characteristics of asphalt mixes with FT additive

    NASA Astrophysics Data System (ADS)

    Štefunková, S.

    2012-03-01

    This article is focused on low-temperature asphalt mixture technologies using FT additive and RAP. The modern production and use of asphalt mixture technologies with reduced temperatures has many advantages. These advantages mainly help to save energy and the environment. Lower temperatures enable a reduction in energy consumption, a more acceptable working environment for workers, a reduction in negative environmental effects, such as greenhouse gas emissions, and an improvement in the workability of mixtures and a prolongation of their duration. This technology is currently becoming popular in many countries.

  7. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  8. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  9. Composite filter aids for cleanup of additives

    SciTech Connect

    Rudenko, L.I.; Sklyar, V.Y.

    1984-03-01

    This article examines the properties of composite filter aids in additive cleanup using two- and three-component filter aid composites based on perlite, kieselguhr, diatomite, asbestos, and wood flour. Filtration tests were run on naphtha solutions of the additive zinc dialkyldithiophosphate. The laboratory studies indicate that composites of perlite and kieselguhr with fibrous materials (wood flour or asbestos) show great promise for the removal of solid contaminants from the zinc disalkydithiophosphate additive. The advantages of the filter aid composite based on perlite, kieselguhr, and wood flour in comparison with the two-component composites are the higher filtration rate (by 26%) and the smaller losses of additive (by a factor of 2.1) and isobutyl alcohol (by a factor of 1.6). It is demonstrated that the filtration rate with the three components is 50-60% higher than with the composite of perlite with kieselguhr. The filtration of the zinc dialkyldithiophosphate additive using the composite filter aid based on perlite, kieselguhr, and wood flour, has been adopted at the Volgograd Petroleum Refinery. Includes 2 tables.

  10. Chemical Mixture Risk Assessment Additivity-Based Approaches

    EPA Science Inventory

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  11. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of techniques...-language pathology services and respiratory therapy services. (i) Nursing care services. Nursing...

  12. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of techniques...-language pathology services and respiratory therapy services. (i) Nursing care services. Nursing...

  13. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of techniques...-language pathology services and respiratory therapy services. (i) Nursing care services. Nursing...

  14. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of techniques...-language pathology services and respiratory therapy services. (i) Nursing care services. Nursing...

  15. 42 CFR 410.100 - Included services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... create difficulties in communication. (e) Respiratory therapy services. (1) Respiratory therapy services... cardiopulmonary function. (2) Respiratory therapy services include the following: (i) Application of techniques...-language pathology services and respiratory therapy services. (i) Nursing care services. Nursing...

  16. Lung Disease Including Asthma and Adult Vaccination

    MedlinePlus

    ... Healthcare Professionals Lung Disease including Asthma and Adult Vaccination Language: English Español (Spanish) Recommend on Facebook Tweet ... more about health insurance options. Learn about adult vaccination and other health conditions Asplenia Diabetes Heart Disease, ...

  17. Haemophilus influenzae Disease (Including Hib) Symptoms

    MedlinePlus

    ... is considered invasive. Symptoms of pneumonia usually include: Fever and chills Cough Shortness of breath or difficulty breathing Sweating ... the blood. It can cause symptoms such as: Fever and chills Excessive tiredness Pain in the belly Nausea with ...

  18. Communications circuit including a linear quadratic estimator

    DOEpatents

    Ferguson, Dennis D.

    2015-07-07

    A circuit includes a linear quadratic estimator (LQE) configured to receive a plurality of measurements a signal. The LQE is configured to weight the measurements based on their respective uncertainties to produce weighted averages. The circuit further includes a controller coupled to the LQE and configured to selectively adjust at least one data link parameter associated with a communication channel in response to receiving the weighted averages.

  19. Gas storage materials, including hydrogen storage materials

    SciTech Connect

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  20. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  1. Stability, cytotoxicity and cell uptake of water-soluble dendron–conjugated gold nanoparticles with 3, 12 and 17 nm cores† †Electronic supplementary information (ESI) available: Additional characterization methods and procedures in addition to the data for the characterization of glutathione-capped gold nanoparticles and dendron-conjugated gold nanoparticles including FT-IR spectra (Fig. S1 and S2), UV-vis spectra (Fig. S3 and S6), TEM images (Fig. S4), MALDI-TOF/TOF spectra (Fig. S5), fluorescence spectra (Fig. S6 and S7), In vitro cytotoxic assay results (Fig. S9) and ICP-MS results (Tables 1 and 2). DOI: 10.1039/c5tb00608b Click here for additional data file.

    PubMed Central

    Deol, Suprit; Weerasuriya, Nisala

    2015-01-01

    This article describes the synthesis of water-soluble dendron–conjugated gold nanoparticles (Den–AuNPs) with various average core sizes and the evaluation of stability, cytotoxicity, cell permeability and uptake of these materials. The characterization of Den–AuNPs using various techniques including transmission electron microscopy (TEM), matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF-MS), 1H NMR, FT-IR, and UV-vis spectroscopy confirms the dendron conjugation to the glutathione-capped gold nanoparticles (AuNPs). The stability of AuNPs and Den–AuNPs in solutions of different pH and salt concentration is determined by monitoring the changes in surface plasmon bands of gold using UV-vis spectroscopy. The stability of Den–AuNPs at different pH remained about the same compared to that of AuNPs. In comparison, the Den–AuNPs are found to be more stable than the precursor AuNPs maintaining their solubility in the aqueous solution with the salt concentration of up to 100 mM. The improved stability of Den–AuNPs suggests that the post-functionalization of thiol-capped gold nanoparticle surfaces with dendrons can further improve the physiological stability and biocompatibility of gold nanoparticle-based materials. Cytotoxicity studies of AuNPs and Den–AuNPs with and without fluorophores are also performed by examining cell viability for 3T3 fibroblasts using a MTT cell proliferation assay. The conjugation of dendrons to the AuNPs with a fluorophore is able to decrease the cytotoxicity brought about by the fluorophore. The successful uptake of Den–AuNPs in mouse fibroblast 3T3 cells shows the physiological viability of the hybrid materials. PMID:26366289

  2. Women, Work and Child Care.

    ERIC Educational Resources Information Center

    Mercer, Elizabeth

    This fact sheet provides an array of statistical data on working mothers, such as the need for child care, the child care providers, who supports child care, and work and family. Data sources include a number of federal government and private organizations. Among the statistics highlighted are the following: (1) in 1988, 65 percent of all women…

  3. The Changing Nature of Work.

    ERIC Educational Resources Information Center

    Coates, Joseph F.

    1982-01-01

    There are many changing elements in the world of work that will have an effect on jobs in the future. They include the rise of telecommunications, biotechnology, energy technology, demographic changes, working women, and employees' need for personal satisfaction. The job of vocational education is to prepare people for these changes. (CT)

  4. Working Mothers and Their Children

    ERIC Educational Resources Information Center

    Mead, Margaret

    1970-01-01

    Discusses possible ways of providing continuity of care for young children of working mothers, including industry - sponsored day nurseries, cooperative nursery schools, communal clusters where working and nonworking women share household tasks and child care, and expanded neighborhood day care. (MG)

  5. Additional evidence of Mercurian volcanism

    USGS Publications Warehouse

    Trask, N.J.; Strom, R.G.

    1976-01-01

    Evidence concerned with (1) the character and distribution of terrain surrounding fresh basins, (2) albedo, color and temporal differences between a basin rim and smooth plains on its floor, and (3) the stratigraphic relations and local distribution of smooth plains in the hilly and lineated terrain are cited as additional evidence for an internal origin of much of the Mercurian smooth plains. Altough the question of Mercurian volcanism should be kept open, this evidence together with that presented in an earlier paper suggests that volcanism occurred on Mercury early in its history. ?? 1976.

  6. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  7. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  8. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  9. [Work related predictors for "satisfaction with dementia care" among nurses working in nursing homes].

    PubMed

    Schmidt, Sascha G; Palm, Rebecca; Dichter, Martin; Hasselhorn, Hans Martin

    2011-04-01

    In German nursing homes dementia care is gaining increasing relevance. Dementia care is known to bear the high risk of a substantial occupational burden among nursing staff. Within this context, the "nurses' satisfaction with the care for residents with dementia" is investigated. Secondary data of the German 3q-study is used to assess degrees of nurses' satisfaction with the care for residents with dementia and potential work related predictors. Data from 813 nurses and nursing aides working in 53 nursing homes were included. 42% of all nursing staff was dissatisfied with the care for residents with dementia in their institution, however, pronounced differences were found between the institutions. Registered nurses and nurses in leading positions were more dissatisfied. A multiple regression analysis indicates that high "quantitative demands", low "leadership quality" and "social interaction with other professions" are strong predictors for nurses' satisfaction with the care for residents with dementia. No association was found for "emotional demands" and "possibilities for development". The results indicate that the "nurses" satisfaction with the care for residents with dementia" may be a highly relevant work factor for nursing staff in nursing homes which deserves additional attention in practice and research. The high predictive power of several work organisational factors implies that preventive action should also include work organisational factors. PMID:21480173

  10. Precarious employment, working hours, work-life conflict and health in hotel work.

    PubMed

    McNamara, Maria; Bohle, Philip; Quinlan, Michael

    2011-01-01

    Precarious or temporary work is associated with adverse outcomes including low control over working hours, work-life conflict and stress. The rise in precarious employment is most marked in the service sector but little research has been done on its health effects in this sector. This study compares permanent and temporary workers in the hotel industry, where working hours are highly variable. Survey data from 150 workers from eight 3-Star hotels in urban and regional areas around Sydney were analyzed. Forty-five per cent were male and 52 per cent were female. Fifty four per cent were permanent full-time and 46 per cent were temporary workers. The effects of employment status on perceived job security, control over working hours, and work-life conflict are investigated using PLS-Graph 3.0. The effects of control over working hours, on work-life conflict and subsequent health outcomes are also explored. Temporary workers perceived themselves as less in control of their working hours, than permanent workers (β = .27). However, they also reported lower levels of work intensity (β = .25) and working hours (β = .38). The effects of low hours control (β = .20), work intensity (β = .29), and excessive hours (β = .39) on work-life conflict (r² = .50), and subsequent health effects (r² = .30), are illustrated in the final structural equation model. PMID:20643398

  11. Radiation graft modification of ethylene-propylene rubber—II. Effect of additives

    NASA Astrophysics Data System (ADS)

    Haddadi-Asl, V.; Burford, R. P.; Garnett, J. L.

    1995-02-01

    The effect of multifunctional acrylic additives including TMPTA, PEGDA and PGTA on the radiation grafting of hydrophilic vinyl monomers onto ethylene—propylene elastomer (EPM rubbers) was studied. This work centres upon gamma irradiation-induced grafting of acrylamide (AAm), N-vinyl-2-pyrrolidone (NVP), 2-hydroxyethyl methacrylate (HEMA) and acrylonitrile (AN) onto EPM rubber by the simultaneous method. Water proved to be an effective solvent but methanol lowered grafting. Sulphuric acid was detrimental to both homopolymerisation and grafting, a result consistent with the theory proposed for the role of this additive in polymer grafting systems.

  12. Implicit Solution of Non-Equilibrium Radiation Diffusion Including Reactive Heating Source in Material Energy Equation

    SciTech Connect

    Shumaker, D E; Woodward, C S

    2005-05-03

    In this paper, the authors investigate performance of a fully implicit formulation and solution method of a diffusion-reaction system modeling radiation diffusion with material energy transfer and a fusion fuel source. In certain parameter regimes this system can lead to a rapid conversion of potential energy into material energy. Accuracy in time integration is essential for a good solution since a major fraction of the fuel can be depleted in a very short time. Such systems arise in a number of application areas including evolution of a star and inertial confinement fusion. Previous work has addressed implicit solution of radiation diffusion problems. Recently Shadid and coauthors have looked at implicit and semi-implicit solution of reaction-diffusion systems. In general they have found that fully implicit is the most accurate method for difficult coupled nonlinear equations. In previous work, they have demonstrated that a method of lines approach coupled with a BDF time integrator and a Newton-Krylov nonlinear solver could efficiently and accurately solve a large-scale, implicit radiation diffusion problem. In this paper, they extend that work to include an additional heating term in the material energy equation and an equation to model the evolution of the reactive fuel density. This system now consists of three coupled equations for radiation energy, material energy, and fuel density. The radiation energy equation includes diffusion and energy exchange with material energy. The material energy equation includes reaction heating and exchange with radiation energy, and the fuel density equation includes its depletion due to the fuel consumption.

  13. Working memory and early numeracy training in preschool children.

    PubMed

    Passolunghi, Maria Chiara; Costa, Hiwet Mariam

    2016-01-01

    Many factors influence children's performance in mathematical achievement, including both domain-specific and domain-general factors. This study aimed to verify and compare the effects of two types of training on early numerical skills. One type of training focused on the enhancement of working memory, a domain-general precursor, while the other focused on the enhancement of early numeracy, a domain-specific precursor. The participants were 48 five-year-old preschool children. Both the working memory and early numeracy training programs were implemented for 5 weeks. The results showed that the early numeracy intervention specifically improved early numeracy abilities in preschool children, whereas working memory intervention improved not only working memory abilities but also early numeracy abilities. These findings stress the importance of performing activities designed to train working memory abilities, in addition to activities aimed to enhance more specific skills, in the early prevention of learning difficulties during preschool years. PMID:25366543

  14. Formative Assessment: Simply, No Additives

    ERIC Educational Resources Information Center

    Roskos, Kathleen; Neuman, Susan B.

    2012-01-01

    Among the types of assessment the closest to daily reading instruction is formative assessment. In contrast to summative assessment, which occurs after instruction, formative assessment involves forming judgments frequently in the flow of instruction. Key features of formative assessment include identifying gaps between where students are and…

  15. Sintering additives for zirconia ceramics

    SciTech Connect

    Wu, S.

    1986-01-01

    This book is an overview of sintering science and its application to zirconia materials including CaO, MgO, and Y/sub 2/O/sub 3/-CeO/sub 2/ doped materials. This book is a reference for first-time exposure to zirconia materials technology, particularly densification.

  16. M dwarfs: Theoretical work

    NASA Technical Reports Server (NTRS)

    Mullan, Dermott J.

    1987-01-01

    Theoretical work on the atmospheres of M dwarfs has progressed along lines parallel to those followed in the study of other classes of stars. Such models have become increasingly sophisticated as improvements in opacities, in the equation of state, and in the treatment of convection were incorporated during the last 15 to 20 years. As a result, spectrophotometric data on M dwarfs can now be fitted rather well by current models. The various attempts at modeling M dwarf photospheres in purely thermal terms are summarized. Some extensions of these models to include the effects of microturbulence and magnetic inhomogeneities are presented.

  17. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  18. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  19. 10 CFR 70.65 - Additional content of applications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Additional content of applications. 70.65 Section 70.65... Material § 70.65 Additional content of applications. (a) In addition to the contents required by § 70.22... performance requirements of § 70.61, including a description of the management measures; the requirements...

  20. Scramjet including integrated inlet and combustor

    SciTech Connect

    Kutschenreuter, P.H. Jr.; Blanton, J.C.

    1992-02-04

    This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

  1. A survey of the praying mantises of Rwanda, including new records (Insecta, Mantodea).

    PubMed

    Tedrow, Riley; Nathan, Kabanguka; Richard, Nasasira; Svenson, Gavin J

    2015-01-01

    We report the results of two surveys targeting praying mantises in four localities in Rwanda, specifically Akagera National Park, Nyungwe National Park, Volcanoes National Park, and the Arboretum de Ruhande at the National University of Rwanda. Using an assortment of collecting techniques, including metal halide light traps, sweep netting vegetation and general searching, we obtained 387 adult and 352 juvenile specimens, representing 41 species. A total of 28 novel species records for Rwanda are added to the 18 previously recorded species for the country, in addition to 20 novel species records for the broader region, including neighbouring Uganda and Burundi. This study provides high resolution images of the dorsal habitus of both sexes of representative species, both pinned and living. Species distribution records are presented and discussed. With a 155% increase in species recorded from Rwanda, this survey illustrates the need for further taxonomic work in the region. PMID:26624167

  2. Weather information network including graphical display

    NASA Technical Reports Server (NTRS)

    Leger, Daniel R. (Inventor); Burdon, David (Inventor); Son, Robert S. (Inventor); Martin, Kevin D. (Inventor); Harrison, John (Inventor); Hughes, Keith R. (Inventor)

    2006-01-01

    An apparatus for providing weather information onboard an aircraft includes a processor unit and a graphical user interface. The processor unit processes weather information after it is received onboard the aircraft from a ground-based source, and the graphical user interface provides a graphical presentation of the weather information to a user onboard the aircraft. Preferably, the graphical user interface includes one or more user-selectable options for graphically displaying at least one of convection information, turbulence information, icing information, weather satellite information, SIGMET information, significant weather prognosis information, and winds aloft information.

  3. Transmission line including support means with barriers

    DOEpatents

    Cookson, Alan H.

    1982-01-01

    A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

  4. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  5. Refining Breast Cancer Risk Stratification: Additional Genes, Additional Information.

    PubMed

    Kurian, Allison W; Antoniou, Antonis C; Domchek, Susan M

    2016-01-01

    Recent advances in genomic technology have enabled far more rapid, less expensive sequencing of multiple genes than was possible only a few years ago. Advances in bioinformatics also facilitate the interpretation of large amounts of genomic data. New strategies for cancer genetic risk assessment include multiplex sequencing panels of 5 to more than 100 genes (in which rare mutations are often associated with at least two times the average risk of developing breast cancer) and panels of common single-nucleotide polymorphisms (SNPs), combinations of which are generally associated with more modest cancer risks (more than twofold). Although these new multiple-gene panel tests are used in oncology practice, questions remain about the clinical validity and the clinical utility of their results. To translate this increasingly complex genetic information for clinical use, cancer risk prediction tools are under development that consider the joint effects of all susceptibility genes, together with other established breast cancer risk factors. Risk-adapted screening and prevention protocols are underway, with ongoing refinement as genetic knowledge grows. Priority areas for future research include the clinical validity and clinical utility of emerging genetic tests; the accuracy of developing cancer risk prediction models; and the long-term outcomes of risk-adapted screening and prevention protocols, in terms of patients' experiences and survival. PMID:27249685

  6. Swamp Works- Multiple Projects

    NASA Technical Reports Server (NTRS)

    Carelli, Jonathan M.; Schuler, Jason M.; Chandler, Meredith L.

    2013-01-01

    My Surface Systems internship over the summer 2013 session covered a broad range of projects that utilized multiple fields of engineering and technology. This internship included a project to create a command center for a 120 ton regolith bin, for the design and assembly of a blast shield to add further protection for the Surface Systems engineers, for the design and assembly of a portable four monitor hyper wall strip that could extend as large as needed, research and programming a nano drill that could be utilized on a next generation robot or rover, and social media tasks including the making of videos, posting to social networking websites and creation of a new outreach program to help spread the word about the Swamp Works laboratory.

  7. 47 CFR 32.4520 - Additional paid-in capital.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Additional paid-in capital. 32.4520 Section 32... Additional paid-in capital. (a) This account shall include the difference between the net proceeds (including discount, premium and stock issuance expense) received from the issuance of capital stock and the...

  8. 47 CFR 32.4520 - Additional paid-in capital.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Additional paid-in capital. 32.4520 Section 32... Additional paid-in capital. (a) This account shall include the difference between the net proceeds (including discount, premium and stock issuance expense) received from the issuance of capital stock and the...

  9. Shift work and circadian dysregulation of reproduction.

    PubMed

    Gamble, Karen L; Resuehr, David; Johnson, Carl Hirschie

    2013-01-01

    Health impairments, including reproductive issues, are associated with working nights or rotating shifts. For example, shift work has been associated with an increased risk of irregular menstrual cycles, endometriosis, infertility, miscarriage, low birth weight or pre-term delivery, and reduced incidence of breastfeeding. Based on what is known about circadian regulation of endocrine rhythms in rodents (and much less in humans), the circadian clock is an integral regulatory part of the reproductive system. When this 24-h program is disordered by environmental perturbation (such as shift work) or genetic alterations, the endocrine system can be impaired. The purpose of this review is to explore the hypothesis that misalignment of reproductive hormones with the environmental light-dark cycle and/or sleep-wake rhythms can disrupt menstrual cycles, pregnancy, and parturition. We highlight the role of the circadian clock in regulating human reproductive physiology and shift work-induced pathology within each step of the reproductive axis while exploring potential mechanisms from the animal model literature. In addition to documenting the reproductive hazards of shift work, we also point out important gaps in our knowledge as critical areas for future investigation. For example, future studies should examine whether forced desynchronization disrupts gonadotropin secretion rhythms and whether there are sleep/wake schedules that are better or worse for the adaptation of the reproductive system to shift work. These studies are necessary in order to define not only whether or not shift work-induced circadian misalignment impairs reproductive capacity, but also to identify strategies for the future that can minimize this desynchronization. PMID:23966978

  10. Work Cultures and Work/Family Balance.

    ERIC Educational Resources Information Center

    Clark, Sue Campbell

    2001-01-01

    For 179 workers with family responsibilities, flexibility of work was associated with job satisfaction and family well-being, flexible work schedules were not. Supportive supervision was associated only with increased employee citizenship and did not increase work-family balance of those at risk. Family-friendly culture did not appear to benefit…

  11. Swamp Works- Multiple Projects

    NASA Technical Reports Server (NTRS)

    Carelli, Jonathan M.

    2013-01-01

    My Surface Systems internship over the summer 2013 session covered a broad range of projects that ranged multiple aspects and fields of engineering and technology. This internship included a project to create a command center for a 120 ton regolith bin, a design and build for a blast shield to add further protection for the Surface Systems engineers, a design for a portable four monitor hyper wall that can extend as large as needed, research and programming a nano drill for a next generation robot, and social media tasks including the making of videos, posting to social networking websites and implementation of a new weekly outreach program to help spread the word about the Swamp Works laboratory. The objectives for the command center were to create a central computer controlled area for the still in production lunar regolith bin. It needed to be easy to use and the operating systems had to be Linux. The objectives for the hyper wall were to build a mobile transport of monitors that could potentially attach to one another. It needed to be light but sturdy, and have the ability to last. The objectives for the blast shield included a robust design that could withstand a small equipment malfunction, while also being convenient for use. The objectives for the nano-drill included the research and implementation of programming for vertical and horizontal movement. The hyper wall and blasts shield project were designed by me in the Pro/Engineer/Creo2 software. Each project required a meeting with the Swamp Works engineers and was declared successful.

  12. Foil bearing lubrication theory including compressibility effects

    NASA Technical Reports Server (NTRS)

    Gorla, Rama Subba Reddy; Catalano, Daniel A.

    1987-01-01

    An analysis is presented to determine the film thickness in a foil bearing. Using the Reynolds equation and including the compressibility effects of the gas, an equation was developed applicable to the film thickness in a foil bearing. The bearing was divided into three regions, namely, the entrance region, middle region and exit region. Solutions are obtained for the film thickness in each region.

  13. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history...

  14. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history...

  15. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history...

  16. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history...

  17. 28 CFR 20.32 - Includable offenses.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL JUSTICE INFORMATION SYSTEMS Federal Systems and Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... by a § 20.32(a) offense. These exclusions may not be applicable to criminal history...

  18. 42 CFR 409.10 - Included services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... an inpatient of a participating hospital or of a participating CAH or, in the case of emergency... not include the following types of services: (1) Posthospital SNF care, as described in § 409.20... HOSPITAL INSURANCE BENEFITS Inpatient Hospital Services and Inpatient Critical Access Hospital...

  19. 42 CFR 409.10 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 2 2012-10-01 2012-10-01 false Included services. 409.10 Section 409.10 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM HOSPITAL INSURANCE BENEFITS Inpatient Hospital Services and Inpatient Critical Access Hospital...

  20. 42 CFR 409.10 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 2 2013-10-01 2013-10-01 false Included services. 409.10 Section 409.10 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM HOSPITAL INSURANCE BENEFITS Inpatient Hospital Services and Inpatient Critical Access Hospital...

  1. 42 CFR 409.10 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 2 2011-10-01 2011-10-01 false Included services. 409.10 Section 409.10 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM HOSPITAL INSURANCE BENEFITS Inpatient Hospital Services and Inpatient Critical Access Hospital...

  2. Multicultural Resources: Including Technology and the Internet

    ERIC Educational Resources Information Center

    Burton, Bryan

    2004-01-01

    In the fourteen years since the 1990 MENC pre-conference symposium on Multicultural Approaches to Music Education in Washington, D.C., music educators have come to recognize the need to include a variety of world musics in all music curricula, from elementary classrooms to advanced performing ensembles. Accordingly, a significant increase in the…

  3. 42 CFR 441.520 - Included services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Community-Based Attendant Services and Supports State Plan Option (Community First Choice) § 441.520 Included services. (a) If a State elects to provide Community First Choice, the State must provide all...

  4. 42 CFR 441.520 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Community-Based Attendant Services and Supports State Plan Option (Community First Choice) § 441.520 Included services. (a) If a State elects to provide Community First Choice, the State must provide all...

  5. Nuclear Chemistry: Include It in Your Curriculum.

    ERIC Educational Resources Information Center

    Atwood, Charles H.; Sheline, R. K.

    1989-01-01

    Some of the topics that might be included in a nuclear chemistry section are explored. Offers radioactivity, closed shells in nuclei, energy of nuclear processes, nuclear reactions, and fission and fusion as topics of interest. Provided are ideas and examples for each. (MVL)

  6. Haemophilus influenzae Disease (Including Hib) Complications

    MedlinePlus

    ... Z Index MENU CDC A-Z SEARCH A B C D E F G H I J K L M N O P Q R S T U V W X Y Z # Start of Search Controls Search Form Controls Search The CDC Cancel Submit Search The CDC Haemophilus influenzae Disease (Including Hib) Note: Javascript is disabled or ...

  7. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Vessels included. 289.2 Section 289.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING SUBSIDIZED VESSELS AND OPERATORS INSURANCE OF CONSTRUCTION-DIFFERENTIAL SUBSIDY VESSELS, OPERATING-DIFFERENTIAL SUBSIDY VESSELS AND OF VESSELS SOLD...

  8. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Vessels included. 289.2 Section 289.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING SUBSIDIZED VESSELS AND OPERATORS INSURANCE OF CONSTRUCTION-DIFFERENTIAL SUBSIDY VESSELS, OPERATING-DIFFERENTIAL SUBSIDY VESSELS AND OF VESSELS SOLD...

  9. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Vessels included. 289.2 Section 289.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING SUBSIDIZED VESSELS AND OPERATORS INSURANCE OF CONSTRUCTION-DIFFERENTIAL SUBSIDY VESSELS, OPERATING-DIFFERENTIAL SUBSIDY VESSELS AND OF VESSELS SOLD...

  10. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Vessels included. 289.2 Section 289.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING SUBSIDIZED VESSELS AND OPERATORS INSURANCE OF CONSTRUCTION-DIFFERENTIAL SUBSIDY VESSELS, OPERATING-DIFFERENTIAL SUBSIDY VESSELS AND OF VESSELS SOLD...

  11. 46 CFR 289.2 - Vessels included.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Vessels included. 289.2 Section 289.2 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REGULATIONS AFFECTING SUBSIDIZED VESSELS AND OPERATORS INSURANCE OF CONSTRUCTION-DIFFERENTIAL SUBSIDY VESSELS, OPERATING-DIFFERENTIAL SUBSIDY VESSELS AND OF VESSELS SOLD...

  12. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules...

  13. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of this subpart apply to...

  14. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules of this subpart apply to...

  15. 47 CFR 1.9005 - Included services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to 47 CFR 90.187(b)(2)(v)); (z) The 218-219 MHz band (part 95 of this chapter); (aa) The Local... Spectrum Leasing Scope and Authority § 1.9005 Included services. The spectrum leasing policies and rules...

  16. Including Students with Visual Impairments: Softball

    ERIC Educational Resources Information Center

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  17. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  18. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder. PMID:3826294

  19. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  20. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  1. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  2. Anomaly Detection In Additively Manufactured Parts Using Laser Doppler Vibrometery

    SciTech Connect

    Hernandez, Carlos A.

    2015-09-29

    Additively manufactured parts are susceptible to non-uniform structure caused by the unique manufacturing process. This can lead to structural weakness or catastrophic failure. Using laser Doppler vibrometry and frequency response analysis, non-contact detection of anomalies in additively manufactured parts may be possible. Preliminary tests show promise for small scale detection, but more future work is necessary.

  3. Anti-misting additives for jet fuels

    NASA Technical Reports Server (NTRS)

    Grens, E. A., II; Williams, M. C.

    1982-01-01

    The ignition characteristics of sprays, created by wind shear action, of Jet-A fuel containing polyisobutylene additives wee examined over ranges of air velocities from 45 to 90 m/s and of fuel/air mass ratios of 0.20 to 8.0. Ignition was by calibrated sparks of energies up to about 0.5 J and by a butane/oxygen flame at 165 J/s. The polymeric additives studied included the grades L80, L160, and L200 from Exxon Chemical and B200 and B230 from BASF. The ignition suppression ability of the additives, as well as their observed anti-misting (AM) behavior, ranked exactly as their molecular weights (viscosity average, M sub v) with 400-500 ppm of L80 (M sub v = 0.68 x 1,000,000) being required to suppress ignition of a spray at 51 m/s, 1.8 fuel/air mass ratio, by a 0.55 J spark while only 10 ppm of B230 (M sub v = 7.37 x 1,000,000) was required for the same conditions. The additive concentrations (L160) required for ignition suppression increased with increasing air velocity and with increasing fuel/air ratio.

  4. Division B Commission 14 Working Group: Collision Processes

    NASA Astrophysics Data System (ADS)

    Peach, Gillian; Dimitrijevic, Milan S.; Barklem, Paul S.

    2016-04-01

    Since our last report (Peach & Dimitrijević 2012), a large number of new publications on the results of research in atomic and molecular collision processes and spectral line broadening have been published. Due to the limited space available, we have only included work of importance for astrophysics. Additional relevant papers, not included in this report, can be found in the databases at the web addresses provided in Section 6. Elastic and inelastic collisions between electrons, atoms, ions, and molecules are included, as well as charge transfer in collisions between heavy particles which can be very important.

  5. Necessary and Sufficient Process leading to Work Smart Standards. Final report

    SciTech Connect

    1996-11-01

    The Necessary and Sufficient Process leading to Work Smart Standards is a Department of Energy initiative to assure adequate protection for workers, the public, and the environment. The Work Smart Standards initiative directs the Laboratory to develop a set of ES and H standards based on the work performed at the Laboratory and the hazards associated with the work. Berkeley Lab`s set of Work Smart Standards includes required Federal, State and local laws and, additionally, national and international standards which represent the highest operating standards of industrial and commercial institutions.

  6. Fire extinct experiments with water mist by adding additives

    NASA Astrophysics Data System (ADS)

    Yang, Lijun; Zhao, Jianbo

    2011-12-01

    The effects of fire extinguishment with water mist by adding different additives were studied. Tens of chemical substances (including alkali metal salt, dilution agent and surface active agent) were selected as additives due to their different extinct mechanisms. At first the performance of fire extinguishment with single additive was studied, then the effects of the same kinds of chemical substances under the same mass fraction were compared to study their influences on the fire extinguishment factors, including extinct time, fire temperature and oxygen concentration from which the fire extinct mechanism with additives could be concluded. Based on this the experiments were conducted to study the cooperate effect of the complexity of different additives. It indicated the relations between different firefighting mechanisms and different additives were competitive. From a large number of experiments the extinct mechanism with water mist by adding additives was concluded and an optimal compounding additive was selected.

  7. 48 CFR 252.227-7021 - Rights in data-existing works.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... includes literary, musical, and dramatic works; pantomimes and choreographic works; pictorial, graphic and sculptural works; motion pictures and other audiovisual works; sound recordings; and works of a...

  8. Femtosecond fiber laser additive manufacturing of tungsten

    NASA Astrophysics Data System (ADS)

    Bai, Shuang; Liu, Jian; Yang, Pei; Zhai, Meiyu; Huang, Huan; Yang, Lih-Mei

    2016-04-01

    Additive manufacturing (AM) is promising to produce complex shaped components, including metals and alloys, to meet requirements from different industries such as aerospace, defense and biomedicines. Current laser AM uses CW lasers and very few publications have been reported for using pulsed lasers (esp. ultrafast lasers). In this paper, additive manufacturing of Tungsten materials is investigated by using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. Fully dense Tungsten part with refined grain and increased hardness was obtained and compared with parts made with different pulse widths and CW laser. The results are evidenced that the fs laser based AM provides more dimensions to modify mechanical properties with controlled heating, rapid melting and cooling rates compared with a CW or long pulsed laser. This can greatly benefit to the make of complicated structures and materials that could not be achieved before.

  9. The teratology testing of food additives.

    PubMed

    Barrow, Paul C; Spézia, François

    2013-01-01

    The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals. PMID:23138896

  10. Laboratory tests of sludge-control additives

    SciTech Connect

    Tatnall, R.E.

    1996-07-01

    Laboratory {open_quotes}jar{close_quotes} tests compared eleven different fuel oil and diesel fuel sludge-control additives. Factors studied included (1) ability to disperse and prevent buildup of sludge deposits on surfaces, (2) ability to protect steel from corrosion, (3) ability to inhibit growth and proliferation of bacteria, and (4) ability to disperse water. Results varied greatly, and it was found that many commercial products do not do what they claim. It is concluded that fuel retailers should not believe manufacturers` claims for their additive products, but rather should test such products themselves to be sure that the benefits of treatment are real. A simplified form of the procedure used here is proposed as one way for dealers to do such testing.

  11. Subterranean barriers including at least one weld

    DOEpatents

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  12. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  13. Jet-calculus approach including coherence effects

    SciTech Connect

    Jones, L.M.; Migneron, R.; Narayanan, K.S.S.

    1987-01-01

    We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ''incoherent'' jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics.

  14. Electric power monthly, September 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  15. Power generation method including membrane separation

    DOEpatents

    Lokhandwala, Kaaeid A.

    2000-01-01

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  16. Rotor assembly including superconducting magnetic coil

    DOEpatents

    Snitchler, Gregory L.; Gamble, Bruce B.; Voccio, John P.

    2003-01-01

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  17. Enhancer additivity and non-additivity are determined by enhancer strength in the Drosophila embryo

    PubMed Central

    Bothma, Jacques P; Garcia, Hernan G; Ng, Samuel; Perry, Michael W; Gregor, Thomas; Levine, Michael

    2015-01-01

    Metazoan genes are embedded in a rich milieu of regulatory information that often includes multiple enhancers possessing overlapping activities. In this study, we employ quantitative live imaging methods to assess the function of pairs of primary and shadow enhancers in the regulation of key patterning genes-knirps, hunchback, and snail-in developing Drosophila embryos. The knirps enhancers exhibit additive, sometimes even super-additive activities, consistent with classical gene fusion studies. In contrast, the hunchback enhancers function sub-additively in anterior regions containing saturating levels of the Bicoid activator, but function additively in regions where there are diminishing levels of the Bicoid gradient. Strikingly sub-additive behavior is also observed for snail, whereby removal of the proximal enhancer causes a significant increase in gene expression. Quantitative modeling of enhancer–promoter interactions suggests that weakly active enhancers function additively while strong enhancers behave sub-additively due to competition with the target promoter. DOI: http://dx.doi.org/10.7554/eLife.07956.001 PMID:26267217

  18. The taxonomy of viruses should include viruses.

    PubMed

    Calisher, Charles H

    2016-05-01

    Having lost sight of its goal, the International Committee on Taxonomy of Viruses has redoubled its efforts. That goal is to arrive at a consensus regarding virus classification, i.e., proper placement of viruses in a hierarchical taxonomic scheme; not an easy task given the wide variety of recognized viruses. Rather than suggesting a continuation of the bureaucratic machinations of the past, this opinion piece is a call for insertion of common sense in sorting out the avalanche of information already, and soon-to-be, accrued data. In this way information about viruses ideally would be taxonomically correct as well as useful to working virologists and journal editors, rather than being lost, minimized, or ignored. PMID:26914357

  19. TANF Reauthorization and Work Requirements.

    ERIC Educational Resources Information Center

    Relave, Nanette

    2002-01-01

    The various parties interested in reauthorization of the Temporary Assistance for Needy Families (TANF) program are considering a number of issues related to the program's work requirements. The following policy questions have sparked particular debate: (1) the impact that allowing additional activities to count toward federal participation rates…

  20. Reduced Toxicity Fuel Satellite Propulsion System Including Plasmatron

    NASA Technical Reports Server (NTRS)

    Schneider, Steven J. (Inventor)

    2003-01-01

    A reduced toxicity fuel satellite propulsion system including a reduced toxicity propellant supply for consumption in an axial class thruster and an ACS class thruster. The system includes suitable valves and conduits for supplying the reduced toxicity propellant to the ACS decomposing element of an ACS thruster. The ACS decomposing element is operative to decompose the reduced toxicity propellant into hot propulsive gases. In addition the system includes suitable valves and conduits for supplying the reduced toxicity propellant to an axial decomposing element of the axial thruster. The axial decomposing element is operative to decompose the reduced toxicity propellant into hot gases. The system further includes suitable valves and conduits for supplying a second propellant to a combustion chamber of the axial thruster. whereby the hot gases and the second propellant auto-ignite and begin the combustion process for producing thrust.

  1. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting. PMID:25500631

  2. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  3. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  4. Additive attacks on speaker recognition

    NASA Astrophysics Data System (ADS)

    Farrokh Baroughi, Alireza; Craver, Scott

    2014-02-01

    Speaker recognition is used to identify a speaker's voice from among a group of known speakers. A common method of speaker recognition is a classification based on cepstral coefficients of the speaker's voice, using a Gaussian mixture model (GMM) to model each speaker. In this paper we try to fool a speaker recognition system using additive noise such that an intruder is recognized as a target user. Our attack uses a mixture selected from a target user's GMM model, inverting the cepstral transformation to produce noise samples. In our 5 speaker data base, we achieve an attack success rate of 50% with a noise signal at 10dB SNR, and 95% by increasing noise power to 0dB SNR. The importance of this attack is its simplicity and flexibility: it can be employed in real time with no processing of an attacker's voice, and little computation is needed at the moment of detection, allowing the attack to be performed by a small portable device. For any target user, knowing that user's model or voice sample is sufficient to compute the attack signal, and it is enough that the intruder plays it while he/she is uttering to be classiffed as the victim.

  5. A sonic boom propagation model including mean flow atmospheric effects

    NASA Astrophysics Data System (ADS)

    Salamone, Joe; Sparrow, Victor W.

    2012-09-01

    This paper presents a time domain formulation of nonlinear lossy propagation in onedimension that also includes the effects of non-collinear mean flow in the acoustic medium. The model equation utilized is an augmented Burgers equation that includes the effects of nonlinearity, geometric spreading, atmospheric stratification, and also absorption and dispersion due to thermoviscous and molecular relaxation effects. All elements of the propagation are implemented in the time domain and the effects of non-collinear mean flow are accounted for in each term of the model equation. Previous authors have presented methods limited to showing the effects of wind on ray tracing and/or using an effective speed of sound in their model equation. The present work includes the effects of mean flow for all terms included in the augmented Burgers equation with all of the calculations performed in the time-domain. The capability to include the effects of mean flow in the acoustic medium allows one to make predictions more representative of real-world atmospheric conditions. Examples are presented for nonlinear propagation of N-waves and shaped sonic booms. [Work supported by Gulfstream Aerospace Corporation.

  6. Impact of Including Higher Actinides in Fast Reactor Transmutation Analyses

    SciTech Connect

    B. Forget; M. Asgari; R. Ferrer; S. Bays

    2007-09-01

    Previous fast reactor transmutation studies generally disregarded higher mass minor actinides beyond Cm-246 due to various considerations including deficiencies in nuclear cross-section data. Although omission of these higher mass actinides does not significantly impact the neutronic calculations and fuel cycle performance parameters follow-on neutron dose calculations related to fuel recycling, transportation and handling are significantly impacted. This report shows that including the minor actinides in the equilibrium fast reactor calculations will increase the predicted neutron emission by about 30%. In addition a sensitivity study was initiated by comparing the impact of different cross-section evaluation file for representing these minor actinides.

  7. Accelerating Industrial Adoption of Metal Additive Manufacturing Technology

    NASA Astrophysics Data System (ADS)

    Vartanian, Kenneth; McDonald, Tom

    2016-03-01

    While metal additive manufacturing (AM) technology has clear benefits, there are still factors preventing its adoption by industry. These factors include the high cost of metal AM systems, the difficulty for machinists to learn and operate metal AM machines, the long approval process for part qualification/certification, and the need for better process controls; however, the high AM system cost is the main barrier deterring adoption. In this paper, we will discuss an America Makes-funded program to reduce AM system cost by combining metal AM technology with conventional computerized numerical controlled (CNC) machine tools. Information will be provided on how an Optomec-led team retrofitted a legacy CNC vertical mill with laser engineered net shaping (LENS®—LENS is a registered trademark of Sandia National Labs) AM technology, dramatically lowering deployment cost. The upgraded system, dubbed LENS Hybrid Vertical Mill, enables metal additive and subtractive operations to be performed on the same machine tool and even on the same part. Information on the LENS Hybrid system architecture, learnings from initial system deployment and continuing development work will also be provided to help guide further development activities within the materials community.

  8. Additional first-trimester ultrasound markers.

    PubMed

    Sonek, J; Nicolaides, K

    2010-09-01

    The first trimester (11-13 +6 weeks) ultrasound examination is useful for several reasons: determination of an accurate date of confinement, diagnostic purposes, and screening for fetal defects. Nuchal translucency measurement combined with maternal serum markers (free b-human chorionic gonadotropin and pregnancy-associated plasma protein A) is the mainstay of first-trimester screening for chromosomal defects. However, over the past decade additional ultrasound markers have been developed that improve the performance of this type of screening. The novel markers include evaluation of the nasal bone, fronto-maxillary angle measurement, and Doppler evaluations of the blood flow across the tricuspid valve and in the ductus venosus. PMID:20638573

  9. Electrolyte additive for improved battery performance

    DOEpatents

    Bellows, Richard J.; Kantner, Edward

    1989-04-04

    In one embodiment of the present invention, there is provided an electrochemical cell having a metal bromine couple. The cell includes an electrode structure on which to deposit the metal of the couple and a counterelectrode at which to generate bromine. A microporous membrane separates the electrode and counterelectrode. Importantly, the aqueous electrolyte comprises an aqueous metal bromide solution containing a water soluble bromine complexing agent capable of forming a water immiscible complex with bromine and an additive capable of decreasing the wettability of the microporous separators employed in such cells by such water immiscible bromine complexes.

  10. Office of Inspector General fiscal year 1996 annual work plan

    SciTech Connect

    1995-10-01

    This FY 1996 Office of Inspector General (OIG) Annual Work Plan is a summary and distillation of information contained in annual work plans, and includes audits and inspections that are carried over from FY 1995 as well as audits and inspections scheduled to start during FY 1996. Audits and inspections included in this consolidated OIG Annual Work Plan will be performed by OIG staff. Specialized expertise available through a Certified Public Accounting firm will be used to assist in auditing the Department`s financial statements. As part of the OIG Cooperative Audit Strategy, additional audit coverage of the Department`s programs is provided by internal auditors of the Department`s integrated contractors. Through the Cooperative Audit Strategy, the OIG ensures that the internal auditors satisfy audit standards, provides planning guidance to the internal auditors, coordinates work to avoid duplication, and tracks the work of internal auditors to ensure that needed audits are performed. Applicable portions of the four annual work plans issued for Fiscal Year 1996 by the Deputy/Assistant Inspectors General have been combined to form a major part of this overall OIG Annual Work Plan. Also included are portions of the most recent OIG Semiannual Reports to Congress to give an overview of the OIG`s mission/organization, resource status, and the environment in which the OIG currently operates. The OIG Annual Work Plan also lists ongoing and planned audits and inspections, and it presents investigative statistics which have been previously reported in the two OIG Semiannual Reports to Congress which cover Fiscal Year 1995. Furthermore, included in this work plan are descriptions of several innovations developed by the OIG to streamline its operations and to conserve as much efficiency and economy as possible in a time of resource reductions.

  11. Inverse transonic airfoil design including viscous interaction

    NASA Technical Reports Server (NTRS)

    Carlson, L. A.

    1976-01-01

    A numerical technique was developed for the analysis of specified transonic airfoils or for the design of airfoils having a prescribed pressure distribution, including the effect of weak viscous interaction. The method uses the full potential equation, a stretched Cartesian coordinate system, and the Nash-MacDonald turbulent boundary layer method. Comparisons with experimental data for typical transonic airfoils show excellent agreement. An example shows the application of the method to design a thick aft-cambered airfoil, and the effects of viscous interaction on its performance are discussed.

  12. Shape optimization including finite element grid adaptation

    NASA Technical Reports Server (NTRS)

    Kikuchi, N.; Taylor, J. E.

    1984-01-01

    The prediction of optimal shape design for structures depends on having a sufficient level of precision in the computation of structural response. These requirements become critical in situations where the region to be designed includes stress concentrations or unilateral contact surfaces, for example. In the approach to shape optimization discussed here, a means to obtain grid adaptation is incorporated into the finite element procedures. This facility makes it possible to maintain a level of quality in the computational estimate of response that is surely adequate for the shape design problem.

  13. Fuel delivery system including heat exchanger means

    NASA Technical Reports Server (NTRS)

    Coffinberry, G. A. (Inventor)

    1978-01-01

    A fuel delivery system is presented wherein first and second heat exchanger means are each adapted to provide the transfer of heat between the fuel and a second fluid such as lubricating oil associated with the gas turbine engine. Valve means are included which are operative in a first mode to provide for flow of the second fluid through both first and second heat exchange means and further operative in a second mode for bypassing the second fluid around the second heat exchanger means.

  14. Analysis of wing truss stresses including the effect of redundancies

    NASA Technical Reports Server (NTRS)

    Warner, E P; Miller, R G

    1921-01-01

    Airplane wing trusses are generally designed to contain redundant members (stagger wires and external drag wires) which, according to common practice, are not taken into account in calculations, so as to simplify the stress analysis by rendering the structure statically determinate. A more accurate method, in which the redundancies are included, involves a solution by means of Castigliano's method of least work. For the purpose of demonstrating the practical application of the method of least work this report presents examples for stresses of several cases of loading worked out for a structure similar to that of the Curtiss JN-4h. Case 1 was taken as the condition of velocity of 100 miles per hour combined with the angle of attack of maximum lift. Case 1a assumed the same loading but neglected the distortion of wooden members in the least-work analysis. So little error was involved in case 1a that this simplified method was employed for each succeeding case. Case 2 assumed a diving speed of 120 miles per hour and an angle of attack of no lift. Case 3 was worked out for the conditions imposed by the sand load recommended in NACA technical note no. 6.

  15. Additional Security Considerations for Grid Management

    NASA Technical Reports Server (NTRS)

    Eidson, Thomas M.

    2003-01-01

    The use of Grid computing environments is growing in popularity. A Grid computing environment is primarily a wide area network that encompasses multiple local area networks, where some of the local area networks are managed by different organizations. A Grid computing environment also includes common interfaces for distributed computing software so that the heterogeneous set of machines that make up the Grid can be used more easily. The other key feature of a Grid is that the distributed computing software includes appropriate security technology. The focus of most Grid software is on the security involved with application execution, file transfers, and other remote computing procedures. However, there are other important security issues related to the management of a Grid and the users who use that Grid. This note discusses these additional security issues and makes several suggestions as how they can be managed.

  16. Aerosol simulation including chemical and nuclear reactions

    SciTech Connect

    Marwil, E.S.; Lemmon, E.C.

    1985-01-01

    The numerical simulation of aerosol transport, including the effects of chemical and nuclear reactions presents a challenging dynamic accounting problem. Particles of different sizes agglomerate and settle out due to various mechanisms, such as diffusion, diffusiophoresis, thermophoresis, gravitational settling, turbulent acceleration, and centrifugal acceleration. Particles also change size, due to the condensation and evaporation of materials on the particle. Heterogeneous chemical reactions occur at the interface between a particle and the suspending medium, or a surface and the gas in the aerosol. Homogeneous chemical reactions occur within the aersol suspending medium, within a particle, and on a surface. These reactions may include a phase change. Nuclear reactions occur in all locations. These spontaneous transmutations from one element form to another occur at greatly varying rates and may result in phase or chemical changes which complicate the accounting process. This paper presents an approach for inclusion of these effects on the transport of aerosols. The accounting system is very complex and results in a large set of stiff ordinary differential equations (ODEs). The techniques for numerical solution of these ODEs require special attention to achieve their solution in an efficient and affordable manner. 4 refs.

  17. The lever of riches. [Includes innovation

    SciTech Connect

    Mokyr, J.

    1990-01-01

    The main reason I have dwelled so long on the distinction between micro- and macroinventions is that both were very much part of the story. Here, then, is the most fundamental complementarity of the economic history of technological change. Without new big ideas, the drift of cumulative small inventions will start to run into diminishing returns. When exactly this will occur depends on the technique in question, but it seems clear that additional improvements in the sailing ship were becoming more difficult by the 1870s, that best-practice grain yields were approximating some kind of ceiling by the mid-nineteenth century, and that crucible steel had been taken a long way by 1856. Macroinventions such as the screw propeller, chemical fertilizers, and the Bessemer process revitalized a movement that was approaching something close to a technological ceiling. It is not necessary for the ideas to emerge in the receptive economy itself; some of the inventions Britian exploited during the Industrial Revolution came from France. After 1860 the inventions it generated were increasingly adopted in other countries more quickly than in Britian itself. Regardless of where they came from, genuinely important new ideas were neither cheap nor elastically supplied. Technology was, as I have argued repeatedly, constrained by supply. What made societies poor was not that they had too few resources, but that they did not know how to produce more wealth with the resources they had. Ideas alone may not have been enough either; all the same, they were indispensable.

  18. Polarimetric Models of Circumstellar Discs Including Aggregate Dust Grains

    NASA Astrophysics Data System (ADS)

    Mohan, Mahesh

    The work conducted in this thesis examines the nature of circumstellar discs by investigating irradiance and polarization of scattered light. Two circumstellar discs are investigated. Firstly, H-band high contrast imaging data on the transitional disc of the Herbig Ae/Be star HD169142 are presented. The images were obtained through the polarimetric differential imaging (PDI) technique on the Very Large Telescope (VLT) using the adaptive optics system NACO. Our observations use longer exposure times, allowing us to examine the edges of the disc. Analysis of the observations shows distinct signs of polarization due to circumstellar material, but due to excessive saturation and adaptive optics errors further information on the disc could not be inferred. The HD169142 disc is then modelled using the 3D radiative transfer code Hyperion. Initial models were constructed using a two disc structure, however recent PDI has shown the existence of an annular gap. In addition to this the annular gap is found not to be devoid of dust. This then led to the construction of a four-component disc structure. Estimates of the mass of dust in the gap (2.10E-6 Msun) are made as well as for the planet (1.53E-5 Msun (0.016 Mjupiter)) suspected to be responsible for causing the gap. The predicted polarization was also estimated for the disc, peaking at ~14 percent. The use of realistic dust grains (ballistic aggregate particles) in Monte Carlo code is also examined. The fortran code DDSCAT is used to calculate the scattering properties for aggregates which are used to replace the spherical grain models used by the radiative transfer code Hyperion. Currently, Hyperion uses four independent elements to define the scattering matrix, therefore the use of rotational averaging and a 50/50 percent population of grains and their enantiomers were explored to reduce the number of contributing scattering elements from DDSCAT. A python script was created to extract the scattering data from the DDSCAT

  19. The hospital social work self-efficacy scale: a partial replication and extension.

    PubMed

    Holden, G; Cuzzi, L; Spitzer, W; Rutter, S; Chernack, P; Rosenberg, G

    1997-11-01

    The Hospital Social Work Self-Efficacy Scale (HSWSE) was developed to assess social workers' confidence about their ability to perform hospital social work. The scale was originally tested with master's-level social work students. This partial replication and extension included both students and professional social workers. In addition, we used a new scale to assess construct validity and added another hospital to assess external validity. In general, findings continue to support the use of the HSWSE. In addition, anecdotal evidence suggests that this is an outcome measure that practitioners see as easy to use, specific, and highly relevant. PMID:9408775

  20. "Creative" Work Schedules.

    ERIC Educational Resources Information Center

    Blai, Boris

    Many creative or flexible work scheduling options are becoming available to the many working parents, students, handicapped persons, elderly individuals, and others who are either unable or unwilling to work a customary 40-hour work week. These options may be broadly categorized as either restructured or reduced work time options. The three main…