Science.gov

Sample records for additional work remains

  1. Remaining time and opportunities at work: Relationships between age, work characteristics, and occupational future time perspective.

    PubMed

    Zacher, Hannes; Frese, Michael

    2009-06-01

    The authors adapted the concept of future time perspective (FTP) to the work context and examined its relationships with age and work characteristics (job complexity and control). Structural equation modeling of data from 176 employees of various occupations showed that age is negatively related to 2 distinct dimensions of occupational FTP: remaining time and remaining opportunities. Work characteristics (job complexity and control) were positively related to remaining opportunities and moderated the relationship between age and remaining opportunities, such that the relationship became weaker with increasing levels of job complexity and control.

  2. Mussel remains from prehistoric salt works, clarke county, Alabama

    USGS Publications Warehouse

    McGregor, S.W.; Dumas, A.A.

    2010-01-01

    Archaeological research at salt springs in Clarke County, AL (Tombigbee River drainage), documented bivalve mollusk exploitation by late prehistoric American Indians. A total of 582 valves representing 19 species of freshwater mussels (Unionidae) and an estuarine clam (Mactridae) from the Lower Salt Works Site (ca. A.D. 900-1550) and 41 valve fragments representing 6 mussel species from the Stimpson Site (ca. A.D. 1200-1550) were documented. The Lower Salt Works fauna was dominated numerically by Fusconaia ebena and Quadrula asperata, the dominant species reported during recent local surveys. The mussel species represented are known from medium to large streams in sand and gravel habitats and include four federally protected species and other species of conservation concern in Alabama. Results offer comparative data for other archaeological and ecological studies in the region.

  3. Future Remains: Industrial Heritage at the Hanford Plutonium Works

    NASA Astrophysics Data System (ADS)

    Freer, Brian

    This dissertation argues that U.S. environmental and historic preservation regulations, industrial heritage projects, history, and art only provide partial frameworks for successfully transmitting an informed story into the long range future about nuclear technology and its related environmental legacy. This argument is important because plutonium from nuclear weapons production is toxic to humans in very small amounts, threatens environmental health, has a half-life of 24, 110 years and because the industrial heritage project at Hanford is the first time an entire U.S. Department of Energy weapons production site has been designated a U.S. Historic District. This research is situated within anthropological interest in industrial heritage studies, environmental anthropology, applied visual anthropology, as well as wider discourses on nuclear studies. However, none of these disciplines is really designed or intended to be a completely satisfactory frame of reference for addressing this perplexing challenge of documenting and conveying an informed story about nuclear technology and its related environmental legacy into the long range future. Others have thought about this question and have made important contributions toward a potential solution. Examples here include: future generations movements concerning intergenerational equity as evidenced in scholarship, law, and amongst Native American groups; Nez Perce and Confederated Tribes of the Umatilla Indian Reservation responses to the Hanford End State Vision and Hanford's Canyon Disposition Initiative; as well as the findings of organizational scholars on the advantages realized by organizations that have a long term future perspective. While these ideas inform the main line inquiry of this dissertation, the principal approach put forth by the researcher of how to convey an informed story about nuclear technology and waste into the long range future is implementation of the proposed Future Remains clause, as

  4. Constant negotiating: managing work-related musculoskeletal disorders while remaining at the workplace.

    PubMed

    Smith-Young, Joanne; Solberg, Shirley; Gaudine, Alice

    2014-02-01

    We used grounded theory to explore processes and strategies used by workers affected by work-related musculoskeletal disorders (WMSDs) while they remained in the workplace, and we developed a theory to describe the overall process. Participants included 25 workers affected by WMSDs who were currently employed in various workplaces in Newfoundland and Labrador, Canada. The theoretical model has five main phases: (a) becoming concerned, (b) getting medical help, (c) dealing with the workplace, (d) making adjustments to lifestyle, and (e) taking charge, each with separate subphases. Constant negotiating was the core variable that explained the overall process, with workers engaged in negotiations with others in occupational, health, and social contexts. Using a two-dimensional figure, we illustrate the negotiation strategies workers used. We discuss implications for health care, workplaces, education, and research for creating a culture of understanding and respect for injured workers who wish to remain working after developing WMSDs.

  5. Support for School to Work Remains Strong: Three Year Trends in Public Opinion. Arizona School to Work Briefing Paper #13.

    ERIC Educational Resources Information Center

    Vandegrift, Judith A.; Wright, Joel

    Since 1996, Arizona has been building a comprehensive statewide system of school-to-work opportunities for students from kindergarten through college, supported by a School-to-Work (STW) implementation grant from the U.S. Departments of Labor and Education. After 3 years, a public opinion poll of a 2,200-person random sample drawn from parents,…

  6. Early Holocene human remains from the Argentinean Pampas: additional evidence for distinctive cranial morphology of early South Americans.

    PubMed

    Pucciarelli, Héctor M; Perez, S Ivan; Politis, Gustavo G

    2010-10-01

    The cranial morphology of Early Holocene American human samples is characterized by a long and narrow cranial vault, whereas more recent samples exhibit a shorter and wider cranial vault. Two hypotheses have been proposed to account for the morphological differences between early and late-American samples: (a) the migratory hypothesis that suggests that the morphological variation between early and late American samples was the result of a variable number of migratory waves; and (b) the local diversification hypothesis, that is, the morphological differences between early and late American samples were mainly generated by local, random (genetic drift), and nonrandom factors (selection and phenotypic plasticity). We present the first craniometric study of three early skulls from the Argentinean Pampas, dated ∼8,000 cal. years BP (Arroyo Seco 2, Chocorí, and La Tigra), and one associated with mega-faunal remains (Fontezuelas skull). In addition, we studied several Late Holocene samples. We show that the skulls from the Argentinean Pampas are morphologically similar to other Early Holocene American skulls (i.e., Lagoa Santa from Brazil, Tequendama, Checua, and Aguazuque from Colombia, Lauricocha from Peru, and early Mexicans) that exhibit long and narrow cranial vaults. These samples differ from the Late Holocene American samples that exhibit a shorter and wider cranial vault. Our results underscore the important differences in cranial morphology between early and late-American samples. However, we emphasize the need for further studies to discuss alternative hypotheses regarding such differences.

  7. A synopsis of the Defense Advanced Research Projects Agency (DARPA) investment in additive manufacture and what challenges remain

    NASA Astrophysics Data System (ADS)

    Maher, Michael; Smith, Adrien; Margiotta, Jesse

    2014-03-01

    DARPA's interest in additive manufacture dates back to the mid-80s with seedling programs that developed the foundational knowledge and equipment that led to the Solid Freeform Fabrication program in 1990. The drivers for this program included reducing development times by enabling "tool-less" manufacturing as well as integration of design and fabrication tools. DARPA consistently pushed the boundaries of additive manufacture with follow-on programs that expanded the material suite available for 3-D printing as well as new processes that expanded the technology's capability base. Programs such as the Mesoscopic Integrated Conformal Electronics (MICE) program incorporated functionality to the manufacturing processes through direct write of electronics. DARPA's investment in additive manufacture continues to this day but the focus has changed. DARPA's early investments were focused on developing and demonstrating the technology's capabilities. Now that the technology has been demonstrated, there is serious interest in taking advantage of the attributes unique to the processing methodology (such as customization and new design possibilities) for producing production parts. Accordingly, today's investment at DARPA addresses the systematic barriers to implementation rather than the technology itself. The Open Manufacturing program is enabling rapid qualification of new technologies for the manufacturing environment through the development of new modeling and informatics tools. While the technology is becoming more mainstream, there are plenty of challenges that need to be addressed. And as the technology continues to mature, the agency will continue to look for those "DARPA-hard" challenges that enable revolutionary changes in capability and performance for the Department of Defense.

  8. Additional approaches to DNA typing of skeletal remains: the search for "missing" persons killed during the last dictatorship in Argentina.

    PubMed

    Corach, D; Sala, A; Penacino, G; Iannucci, N; Bernardi, P; Doretti, M; Fondebrider, L; Ginarte, A; Inchaurregui, A; Somigliana, C; Turner, S; Hagelberg, E

    1997-08-01

    DNA typing techniques are among the most advanced tools for human identification and can contribute to the identification of poorly preserved skeletal remains. Ten thousand people are thought to have been killed during the last dictatorship in Argentina (1976-1983) and there are few official records on the identity of the victims or the location of burials. A mass grave containing 340 skeletons was excavated using archeological methods. A small number of individuals was identified by traditional forensic methods and one family group by mitochondrial DNA (mtDNA) analysis. Due to the lack of antemortem physical information on many of the victims, the application of molecular methods is imperative to speed up the identification process. We have tested two molecular screening methods, Y chromosome-specific short tandem repeats (DYS19, DYS385, DYS389 I, DYS389 II, DYS390, DYS391, DYS392, DYS393) and amplification of autosomal microsatellites using nested primers. These methods can complement solely matrilineal mtDNA sequence data in the identification of "missing" persons.

  9. Age and work environment characteristics in relation to sleep: Additive, interactive and curvilinear effects.

    PubMed

    Parkes, Katharine R

    2016-05-01

    Although additive combinations of age and work environment characteristics have been found to predict sleep impairment, possible age x work environment interactions have been largely disregarded. The present study examined linear and curvilinear interactions of age with work environment measures in relation to sleep quality and duration. Survey data were collected from offshore day-shift personnel (N = 901). Main effects and interactions of the age terms with work environment measures (job demand, control, and social support, physical environment and strenuous work) were evaluated. Sleep duration was predicted by a curvilinear interaction, age(2) x job demand (p < .005), and by the age x social support interaction (p < .002); sleep quality was predicted by age x job demand (p < .002). Job control and physical environment showed significant additive effects. At a time when older employees are encouraged to remain in the workforce, the findings serve to increase understanding of how ageing and work demands jointly contribute to sleep impairment.

  10. Working in disadvantaged communities: What additional competencies do we need?

    PubMed Central

    Harris, Elizabeth; Harris, Mark F; Madden, Lynne; Wise, Marilyn; Sainsbury, Peter; MacDonald, John; Gill, Betty

    2009-01-01

    Background Residents of socioeconomically disadvantaged locations are more likely to have poor health than residents of socioeconomically advantaged locations and this has been comprehensively mapped in Australian cities. These inequalities present a challenge for the public health workers based in or responsible for improving the health of people living in disadvantaged localities. The purpose of this study was to develop a generic workforce needs assessment tool and to use it to identify the competencies needed by the public health workforce to work effectively in disadvantaged communities. Methods A two-step mixed method process was used to identify the workforce needs. In step 1 a generic workforce needs assessment tool was developed and applied in three NSW Area Health Services using focus groups, key stakeholder interviews and a staff survey. In step 2 the findings of this needs assessment process were mapped against the existing National Health Training Package (HLT07) competencies, gaps were identified, additional competencies described and modules of training developed to fill identified gaps. Results There was a high level of agreement among the AHS staff on the nature of the problems to be addressed but less confidence indentifying the work to be done. Processes for needs assessments, community consultations and adapting mainstream programs to local needs were frequently mentioned as points of intervention. Recruiting and retaining experienced staff to work in these communities and ensuring their safety were major concerns. Workforce skill development needs were seen in two ways: higher order planning/epidemiological skills and more effective working relationships with communities and other sectors. Organisational barriers to effective practice were high levels of annual compulsory training, balancing state and national priorities with local needs and giving equal attention to the population groups that are easy to reach and to those that are difficult

  11. 25 CFR 1000.245 - May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... funds remaining in an AFA at the end of the funding year? 1000.245 Section 1000.245 Indians OFFICE OF... Construction § 1000.245 May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of the funding year? Yes, any funds remaining in an AFA at the end of the funding year may...

  12. 25 CFR 1000.245 - May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... funds remaining in an AFA at the end of the funding year? 1000.245 Section 1000.245 Indians OFFICE OF... Construction § 1000.245 May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of the funding year? Yes, any funds remaining in an AFA at the end of the funding year may...

  13. 25 CFR 1000.245 - May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... funds remaining in an AFA at the end of the funding year? 1000.245 Section 1000.245 Indians OFFICE OF... Construction § 1000.245 May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of the funding year? Yes, any funds remaining in an AFA at the end of the funding year may...

  14. 25 CFR 1000.245 - May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... funds remaining in an AFA at the end of the funding year? 1000.245 Section 1000.245 Indians OFFICE OF... Construction § 1000.245 May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of the funding year? Yes, any funds remaining in an AFA at the end of the funding year may...

  15. 25 CFR 1000.245 - May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... funds remaining in an AFA at the end of the funding year? 1000.245 Section 1000.245 Indians OFFICE OF... Construction § 1000.245 May a Tribe/Consortium continue work with construction funds remaining in an AFA at the end of the funding year? Yes, any funds remaining in an AFA at the end of the funding year may...

  16. Compensating Losses in Bridge Employment? Examining Relations between Compensation Strategies, Health Problems, and Intention to Remain at Work

    ERIC Educational Resources Information Center

    Muller, Andreas; De Lange, Annet; Weigl, Matthias; Oxfart, Caroline; Van der Heijden, Beatrice

    2013-01-01

    In order to better understand the precursors of bridge employment, this study aimed to investigate whether individual action strategies in terms of selection, optimization, and compensation (SOC; Baltes & Baltes, 1990) are able to buffer the well-known negative impact of poor health on the intention to remain in the workforce. 784 employees (60-85…

  17. Technical Work Plan for: Additional Multoscale Thermohydrologic Modeling

    SciTech Connect

    B. Kirstein

    2006-08-24

    will be evaluated and justified. Some of this evaluation will be conducted in conjunction with the post-model development validation activity involving comparisons of predicted TH conditions with measured TH conditions in the DST. The expected result is that, consistent with what was found in Revision 03 of Multiscale Thermohydrologic Model (BSC 2005 [DIRS 173944], Section 6.3.9), near-field/in-drift TH behavior is insensitive to a wide range of host-rock hydrologic property values. It is the intention of the work described in this TWP to propagate the new infiltration fluxes from the replacement infiltration model, by using the percolation fluxes from the revised site-scale unsaturated zone (UZ) flow model that has applied those new infiltration fluxes. The percolation flux distributions will be obtained from the updated site-scale UZ flow model, which has applied updated infiltration flux maps. Another objective of the work scope is to develop, implement, and validate a revised TH submodel-construction approach. This revised approach utilizes interpolation among a set of generic LDTH submodels that are run for a range of percolation flux histories that cover a sufficiently broad range of infiltration flux uncertainty, as well as for four host-rock units (two lithophysal units and two nonlithophysal units), and for three thermal property sets (low, mean, and high). A key motivation for this revised LDTH submodel-construction approach is to enable the MSTHM to be more flexible in addressing a broad range of infiltration flux cases. This approach allows the generic LDTH submodel simulations to be conducted prior to receiving percolation flux maps.

  18. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the...

  19. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition...

  20. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements...

  1. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 196.34-25... VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition... the same method of operation as each other hybrid PFD carried on board....

  2. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 97.34-25... VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  3. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 97.34-25... VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  4. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 196.34-25... VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  5. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  6. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  7. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 97.34-25... VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  8. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 78.36-25... OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in...

  9. 46 CFR 97.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 97.34-25... VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  10. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 78.36-25... OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in...

  11. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 78.36-25... OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in...

  12. 46 CFR 78.36-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 78.36-25... OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in...

  13. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  14. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  15. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 196.34-25... VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  16. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 196.34-25... VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed,...

  17. 46 CFR 167.43-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 167.43-25... PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In... the same method of operation as each other hybrid PFD carried on board....

  18. 48 CFR 1371.103 - Additional item requirements (AIR)-growth work.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... requirements (AIR)-growth work. 1371.103 Section 1371.103 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 1371.103 Additional item requirements (AIR)—growth work. Insert clause 1352.271-72, Additional Item Requirements (AIR)—Growth Work, in all solicitations and contracts for ship repair....

  19. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Requirements (AIR)-growth work 1352.271-72 Section 1352.271-72 Federal Acquisition Regulations System... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103, insert the following clause: Additional Item Requirements (Air)—Growth Work (APR 2010) (a) This...

  20. 48 CFR 1371.103 - Additional item requirements (AIR)-growth work.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... requirements (AIR)-growth work. 1371.103 Section 1371.103 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 1371.103 Additional item requirements (AIR)—growth work. Insert clause 1352.271-72, Additional Item Requirements (AIR)—Growth Work, in all solicitations and contracts for ship repair....

  1. 48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Requirements (AIR)-growth work 1352.271-72 Section 1352.271-72 Federal Acquisition Regulations System... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103, insert the following clause: Additional Item Requirements (Air)—Growth Work (APR 2010) (a) This...

  2. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 35.03-25... § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in accordance with...

  3. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 35.03-25... § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in accordance with...

  4. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 35.03-25... § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in accordance with...

  5. 46 CFR 35.03-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 35.03-25... § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in this subpart, commercial hybrid PFD's must be— (1) Used, stowed, and maintained in accordance with...

  6. Work disability remains a major problem in rheumatoid arthritis in the 2000s: data from 32 countries in the QUEST-RA Study

    PubMed Central

    2010-01-01

    identifier of work disability in all subgroups was Health Assessment Questionnaire (HAQ) functional disability score. Conclusions Work disability rates remain high among people with RA during this millennium. In low-GDP countries, people remain working with high levels of disability and disease activity. Cultural and economic differences between societies affect work disability as an outcome measure for RA. PMID:20226018

  7. Applying principles of self-management to facilitate workers to return to or remain at work with a chronic musculoskeletal condition.

    PubMed

    Johnston, Venerina; Jull, Gwendolen; Sheppard, Dianne M; Ellis, Niki

    2013-08-01

    It is incumbent on health care professionals to support patients with chronic musculoskeletal conditions to manage the impact of the condition on their life. Work is a positive health behaviour for which self-management skills are essential. In this paper, self-management is defined and the role of clinicians in promoting self-management for return to work is outlined with examples and tips on how the clinician can incorporate self-management into practice. The clinician is ideally placed to assist individuals with chronic musculoskeletal conditions manage to remain at work or return to work. This can be achieved through such activities as the promotion of the core self-management skills of problem-solving, decision making, resource utilisation, developing a cooperative partnership between clinician and patient and making an action plan.

  8. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  9. Cell-specific CO2 fixation rates of two distinct groups of plastidic protists in the Atlantic Ocean remain unchanged after nutrient addition.

    PubMed

    Grob, Carolina; Jardillier, Ludwig; Hartmann, Manuela; Ostrowski, Martin; Zubkov, Mikhail V; Scanlan, David J

    2015-04-01

    To assess the role of open-ocean ecosystems in global CO2 fixation, we investigated how picophytoplankton, which dominate primary production, responded to episodic increases in nutrient availability. Previous experiments have shown nitrogen alone, or in combination with phosphorus or iron, to be the proximate limiting nutrient(s) for total phytoplankton grown over several days. Much less is known about how nutrient upshift affects picophytoplankton CO2 fixation over the duration of the light period. To address this issue, we performed a series of small volume (8-60 ml) - short term (10-11 h) nutrient addition experiments in different regions of the Atlantic Ocean using NH4 Cl, FeCl3 , K medium, dust and nutrient-rich water from 300 m depth. We found no significant nutrient stimulation of group-specific CO2 fixation rates of two taxonomically and size-distinct groups of plastidic protists. The above was true regardless of the region sampled or nutrient added, suggesting that this is a generic phenomenon. Our findings show that at least in the short term (i.e. daylight period), nutrient availability does not limit CO2 fixation by the smallest plastidic protists, while their taxonomic composition does not determine their response to nutrient addition.

  10. 46 CFR 196.34-25 - Additional requirements for hybrid work vests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... of this chapter and any limitations(s) marked on them; and (2) Of the same or similar design and...

  11. How Can I Work within the Government's Perspective of "Gifted and Talented" but Still Remain True to My Own Living Values?

    ERIC Educational Resources Information Center

    Mounter, Joy

    2013-01-01

    I am in the unique position as headteacher to develop policy in my school, influencing the experiences of staff, parents and children, as well as a wider audience through my essays and published work (Mounter, 2008). This essay will be in the form of a narrative using the living theory action research approach (Whitehead and McNiff, 2006). It will…

  12. Use of additive technologies for practical working with complex models for foundry technologies

    NASA Astrophysics Data System (ADS)

    Olkhovik, E.; Butsanets, A. A.; Ageeva, A. A.

    2016-07-01

    The article presents the results of research of additive technology (3D printing) application for developing a geometrically complex model of castings parts. Investment casting is well known and widely used technology for the production of complex parts. The work proposes the use of a 3D printing technology for manufacturing models parts, which are removed by thermal destruction. Traditional methods of equipment production for investment casting involve the use of manual labor which has problems with dimensional accuracy, and CNC technology which is less used. Such scheme is low productive and demands considerable time. We have offered an alternative method which consists in printing the main knots using a 3D printer (PLA and ABS) with a subsequent production of castings models from them. In this article, the main technological methods are considered and their problems are discussed. The dimensional accuracy of models in comparison with investment casting technology is considered as the main aspect.

  13. New water-soluble metal working fluids additives from phosphonic acid derivatives for aluminum alloy materials.

    PubMed

    Kohara, Ichitaro; Tomoda, Hideyuki; Watanabe, Shoji

    2007-01-01

    Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short paper describes properties of new additives for water-soluble cutting fluids for aluminum alloy materials. Some alkyldiphosphonic acids were prepared with known method. Amine salts of these phosphonic acids showed anti-corrosion property for aluminum alloy materials. However, they have no hard water tolerance. Monoesters of octylphosphonic acid were prepared by the reaction of octylphosphonic acid dichloride with various alcohols in the presence of triethylamine. Amine salts of monoester of octylphosphonic acid with diethyleneglycol monomethyl ether, ethyleneglycol monomethyl ether and triethyleneglycol monomethyl ether showed both of a good anti-corrosion property for aluminum alloy materials and hard water tolerance.

  14. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  15. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  16. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  17. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  18. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of...

  19. Preparations and properties of anti-corrosion additives of water-soluble metal working fluids for aluminum alloy materials.

    PubMed

    Watanabe, Shoji

    2008-01-01

    This short review describes various types of anti-corrosion additives of water-soluble metal working fluids for aluminum alloy materials. It is concerned with synthetic additives classified according to their functional groups; silicone compounds, carboxylic acids and dibasic acids, esters, Diels-Alder adducts, various polymers, nitrogen compounds, phosphoric esters, phosphonic acids, and others. Testing methods for water-soluble metal working fluids for aluminum alloy materials are described for a practical application in a laboratory.

  20. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    ERIC Educational Resources Information Center

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  1. Work-Family Enrichment and Conflict: Additive Effects, Buffering, or Balance?

    ERIC Educational Resources Information Center

    Gareis, Karen C.; Barnett, Rosalind Chait; Ertel, Karen A.; Berkman, Lisa F.

    2009-01-01

    We used data from the Midlife Development in the United States (MIDUS I) (N = 2,031) to compare three models of how work-family conflict and enrichment might operate to predict well-being (mental health, life satisfaction, affect balance, partner relationship quality). We found no support for a relative-difference model in which the…

  2. [PALEOPATHOLOGY OF HUMAN REMAINS].

    PubMed

    Minozzi, Simona; Fornaciari, Gino

    2015-01-01

    Many diseases induce alterations in the human skeleton, leaving traces of their presence in ancient remains. Paleopathological examination of human remains not only allows the study of the history and evolution of the disease, but also the reconstruction of health conditions in the past populations. This paper describes the most interesting diseases observed in skeletal samples from the Roman Imperial Age necropoles found in urban and suburban areas of Rome during archaeological excavations in the last decades. The diseases observed were grouped into the following categories: articular diseases, traumas, infections, metabolic or nutritional diseases, congenital diseases and tumours, and some examples are reported for each group. Although extensive epidemiological investigation in ancient skeletal records is impossible, the palaeopathological study allowed to highlight the spread of numerous illnesses, many of which can be related to the life and health conditions of the Roman population.

  3. Propellant-remaining modeling

    NASA Technical Reports Server (NTRS)

    Torgovitsky, S.

    1991-01-01

    A successful satellite mission is predicted upon the proper maintenance of the spacecraft's orbit and attitude. One requirement for planning and predicting the orbit and attitude is the accurate estimation of the propellant remaining onboard the spacecraft. Focuss is on the three methods that were developed for calculating the propellant budget: the errors associated with each method and the uncertainties in the variables required to determine the propellant remaining that contribute to these errors. Based on these findings, a strategy is developed for improved propellant-remaining estimation. The first method is based on Boyle's law, which related the values of pressure, volume, and temperature (PVT) of an ideal gas. The PVT method is used for the monopropellant and the bipropellant engines. The second method is based on the engine performance tests, which provide data that relate thrust and specific impulse associated with a propellant tank to that tank's pressure. Two curves representing thrust and specific impulse as functions of pressure are then generated using a polynomial fit on the engine performance data. The third method involves a computer simulation of the propellant system. The propellant flow is modeled by creating a conceptual model of the propulsion system configuration, taking into account such factors as the propellant and pressurant tank characteristics, thruster functionality, and piping layout. Finally, a thrust calibration technique is presented that uses differential correction with the computer simulation method of propellant-remaining modeling. Thrust calibration provides a better assessment of thruster performance and therefore enables a more accurate estimation of propellant consumed during a given maneuver.

  4. [What remains of arthrography?].

    PubMed

    Morvan, G

    1994-06-15

    At the time of RMI, arthrography appears sometimes old-fashioned. However this exam, which knows a second youth in relation with the supply of CT-scan (arthro-CT) remains the gold-standard in the exploration of many pathologic situations: intra-articular foreign bodies, tears of glenoid or acetabular labrum, precise assessment of chondral or ligamentous lesions (especially of the ankle), sub-scapularis tendon tears, adhesive capsulitis, complications of prosthesis, appreciation of intra-articular position of the needle's tip before injection of a therapeutic drug. Arthrography, completed or not by CT-slices gives, in this indications, excellent spatial resolution images, easy to perform, to read, to understand and to transmit at the clinicians, with a reasonable cost and a minor risk. RMI is a more and more used alternative, especially for the study of meniscus and ligaments of the knee, and rotator's cuff of the shoulder. It's sure that, with the increase of the RMI image's quality, other common indications will slip towards this technique, but nevertheless at this time (and it seams to me, for a long time) arthrography and arthro-CT will remain an excellent diagnostic tool with a very competitive advantages/inconvenience ratio.

  5. Concern remains over violence.

    PubMed

    2007-06-01

    In the annual NHS staff survey run by the Healthcare Commission, personnel report that they are less stressed, suffer fewer work-related injuries and see fewer potentially harmful errors, but the results also highlight the levels of violence and abuse that they endure.

  6. The work of the European Union Reference Laboratory for Food Additives (EURL) and its support for the authorisation process of feed additives in the European Union: a review

    PubMed Central

    von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; de la Huebra, María José González; Ezerskis, Zigmas

    2016-01-01

    ABSTRACT This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods. PMID:26540604

  7. Work.

    ERIC Educational Resources Information Center

    Haines, Annette M.

    2003-01-01

    Draws upon Maria Montessori's writings to examine work as a universal human tendency throughout life. Discusses the work of adaptation of the infant, work of "psycho-muscular organism" for the preschooler, work of the imagination for the elementary child, community work of the adolescent, and work of the adult. Asserts that…

  8. Rationale, design and methods of the Study of Work and Pain (SWAP): a cluster randomised controlled trial testing the addition of a vocational advice service to best current primary care for patients with musculoskeletal pain (ISRCTN 52269669)

    PubMed Central

    2014-01-01

    Background Musculoskeletal pain is a major contributor to short and long term work absence. Patients seek care from their general practitioner (GP) and yet GPs often feel ill-equipped to deal with work issues. Providing a vocational case management service in primary care, to support patients with musculoskeletal problems to remain at or return to work, is one potential solution but requires robust evaluation to test clinical and cost-effectiveness. Methods/Design This protocol describes a cluster randomised controlled trial, with linked qualitative interviews, to investigate the effect of introducing a vocational advice service into general practice, to provide a structured approach to managing work related issues in primary care patients with musculoskeletal pain who are absent from work or struggling to remain in work. General practices (n = 6) will be randomised to offer best current care or best current care plus a vocational advice service. Adults of working age who are absent from or struggling to remain in work due to a musculoskeletal pain problem will be invited to participate and 330 participants will be recruited. Data collection will be through patient completed questionnaires at baseline, 4 and 12 months. The primary outcome is self-reported work absence at 4 months. Incremental cost-utility analysis will be undertaken to calculate the cost per additional QALY gained and incremental net benefits. A linked interview study will explore the experiences of the vocational advice service from the perspectives of GPs, nurse practitioners (NPs), patients and vocational advisors. Discussion This paper presents the rationale, design, and methods of the Study of Work And Pain (SWAP) trial. The results of this trial will provide evidence to inform primary care practice and guide the development of services to provide support for musculoskeletal pain patients with work-related issues. Trial registration Current Controlled Trials ISRCTN52269669. PMID:25012813

  9. Why Agricultural Educators Remain in the Classroom

    ERIC Educational Resources Information Center

    Crutchfield, Nina; Ritz, Rudy; Burris, Scott

    2013-01-01

    The purpose of this study was to identify and describe factors that are related to agricultural educator career retention and to explore the relationships between work engagement, work-life balance, occupational commitment, and personal and career factors as related to the decision to remain in the teaching profession. The target population for…

  10. Silicon photonics: some remaining challenges

    NASA Astrophysics Data System (ADS)

    Reed, G. T.; Topley, R.; Khokhar, A. Z.; Thompson, D. J.; Stanković, S.; Reynolds, S.; Chen, X.; Soper, N.; Mitchell, C. J.; Hu, Y.; Shen, L.; Martinez-Jimenez, G.; Healy, N.; Mailis, S.; Peacock, A. C.; Nedeljkovic, M.; Gardes, F. Y.; Soler Penades, J.; Alonso-Ramos, C.; Ortega-Monux, A.; Wanguemert-Perez, G.; Molina-Fernandez, I.; Cheben, P.; Mashanovich, G. Z.

    2016-03-01

    This paper discusses some of the remaining challenges for silicon photonics, and how we at Southampton University have approached some of them. Despite phenomenal advances in the field of Silicon Photonics, there are a number of areas that still require development. For short to medium reach applications, there is a need to improve the power consumption of photonic circuits such that inter-chip, and perhaps intra-chip applications are viable. This means that yet smaller devices are required as well as thermally stable devices, and multiple wavelength channels. In turn this demands smaller, more efficient modulators, athermal circuits, and improved wavelength division multiplexers. The debate continues as to whether on-chip lasers are necessary for all applications, but an efficient low cost laser would benefit many applications. Multi-layer photonics offers the possibility of increasing the complexity and effectiveness of a given area of chip real estate, but it is a demanding challenge. Low cost packaging (in particular, passive alignment of fibre to waveguide), and effective wafer scale testing strategies, are also essential for mass market applications. Whilst solutions to these challenges would enhance most applications, a derivative technology is emerging, that of Mid Infra-Red (MIR) silicon photonics. This field will build on existing developments, but will require key enhancements to facilitate functionality at longer wavelengths. In common with mainstream silicon photonics, significant developments have been made, but there is still much left to do. Here we summarise some of our recent work towards wafer scale testing, passive alignment, multiplexing, and MIR silicon photonics technology.

  11. Central additive effect of Ginkgo biloba and Rhodiola rosea on psychomotor vigilance task and short-term working memory accuracy

    PubMed Central

    Al-Kuraishy, Hayder M.

    2016-01-01

    Aim: The present study investigates the effect of combined treatment with Ginkgo biloba and/or Rhodiola rosea on psychomotor vigilance task (PVT) and short-term working memory accuracy. Subjects and Methods: A total number of 112 volunteers were enrolled to study the effect of G. biloba and R. rosea on PVT and short-term working memory accuracy as compared to placebo effects, the central cognitive effect was assessed by critical flicker-fusion frequency, PVT, and computerized N-back test. Results: Placebo produced no significant effects on all neurocognitive tests measure P > 0.05 in normal healthy volunteers, G. biloba or R. rosea improve PVT and low to moderate working memory accuracy, The combined effect of R. rosea and G. biloba leading to more significant effect on PVT, all levels of short-term working memory accuracy and critical fusion versus flicker P < 0.01, more than of G. biloba or R. rosea when they used alone. Conclusion: The combined effect of R. rosea and G. biloba leading to a more significant effect on cognitive function than either G. biloba or R. rosea when they used alone. PMID:27069717

  12. Shear-layer correction after Amiet under consideration of additional temperature gradient. Working diagrams for correction of signals

    NASA Technical Reports Server (NTRS)

    Dobrzynski, W.

    1984-01-01

    Amiet's correction scheme for sound wave transmission through shear-layers is extended to incorporate the additional effects of different temperatures in the flow-field in the surrounding medium at rest. Within a parameter-regime typical for acoustic measurements in wind tunnels amplitude- and angle-correction is calculated and plotted systematically to provide a data base for the test engineer.

  13. Parasite remains in archaeological sites.

    PubMed

    Bouchet, Françoise; Guidon, Niéde; Dittmar, Katharina; Harter, Stephanie; Ferreira, Luiz Fernando; Chaves, Sergio Miranda; Reinhard, Karl; Araújo, Adauto

    2003-01-01

    Organic remains can be found in many different environments. They are the most significant source for paleoparasitological studies as well as for other paleoecological reconstruction. Preserved paleoparasitological remains are found from the driest to the moistest conditions. They help us to understand past and present diseases and therefore contribute to understanding the evolution of present human sociality, biology, and behavior. In this paper, the scope of the surviving evidence will be briefy surveyed, and the great variety of ways it has been preserved in different environments will be discussed. This is done to develop to the most appropriated techniques to recover remaining parasites. Different techniques applied to the study of paleoparasitological remains, preserved in different environments, are presented. The most common materials used to analyze prehistoric human groups are reviewed, and their potential for reconstructing ancient environment and disease are emphasized. This paper also urges increased cooperation among archaeologists, paleontologists, and paleoparasitologists.

  14. Content and Access Remain Key

    ERIC Educational Resources Information Center

    Johnson, Linda B.

    2007-01-01

    It is impossible to review the year's outstanding government publication landscape without acknowledging that change remains paramount. Just as striking, however, is that these changes go hand in hand with some familiar constants. Within this shifting environment, there are the consistency and dependability of government information itself,…

  15. Water-soluble metal working fluids additives derived from the esters of acid anhydrides with higher alcohols for aluminum alloy materials.

    PubMed

    Yamamoto, Syutaro; Tomoda, Hideyuki; Watanabe, Shoji

    2007-01-01

    Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short article describes properties of new additives in water-soluble metal working fluids for aluminum alloy materials. Many half esters or diesters were prepared from the reactions of higher alcohols with acid anhydrides. Interestingly, diesters of PTMG (tetrahydrofuran oligomer, MW = 650 and 1000) and polybutylene oxide (MW = 650) with maleic anhydride and succinic anhydride showed both of an excellent anti-corrosion property for aluminum alloy and a good hard water tolerance. The industrial soluble type processing oils including these additives also showed anti-corrosion property and hard water tolerance.

  16. Child Labour Remains "Massive Problem."

    ERIC Educational Resources Information Center

    World of Work, 2002

    2002-01-01

    Despite significant progress in efforts to abolish child labor, an alarming number of children are engaged in its worst forms. Although 106 million are engaged in acceptable labor (light work for those above the minimum age for employment), 246 million are involved in child labor that should be abolished (under minimum age, hazardous work). (JOW)

  17. Community Coauthoring: Whose Voice Remains?

    ERIC Educational Resources Information Center

    Larson, Joanne; Webster, Stephanie; Hopper, Mindy

    2011-01-01

    This article examines how texts are collaboratively produced in community development work when coauthors come from multiple racial, ethnic, and class backgrounds as well as business and other work experiences. We found that the term "wordsmithing" became a discursive tool that limited resident input and shaped the Plan toward an…

  18. Juveniles' Motivations for Remaining in Prostitution

    ERIC Educational Resources Information Center

    Hwang, Shu-Ling; Bedford, Olwen

    2004-01-01

    Qualitative data from in-depth interviews were collected in 1990-1991, 1992, and 2000 with 49 prostituted juveniles remanded to two rehabilitation centers in Taiwan. These data are analyzed to explore Taiwanese prostituted juveniles' feelings about themselves and their work, their motivations for remaining in prostitution, and their difficulties…

  19. The influence of Ag+Mg additions on the nucleation of strengthening precipitates in a non-cold-worked Al-Cu-Li alloy

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Aluminum-copper-lithium alloys generally require cold work to attain their highest strengths in artificially aged tempers. These alloys are usually strengthened by a combination of the metastable delta prime (Al3Li) and theta prime (Al2Cu) phases and the equilibrium T sub 1 (Al2CuLi) phase, and where the T sub 1 phase is a more potent strengthener than the delta prime. Various investigators have shown that the high strengths obtained after artificial aging associated with cold work result from the heterogeneous precipitation of T sub 1 on matrix dislocations. The objective here is to elucidate the mechanism by which the Ag+Mg additions stimulate the precipitation of T sub 1 type precipitates without cold work. To accomplish this, the microstructure of an Al-6.3Cu-1.3Li-0.14Zr model alloy was evaluated in a T6 type temper with and without the Ag+Mg addition.

  20. Motivational Interventions that Work: Themes and Remaining Issues

    ERIC Educational Resources Information Center

    Wentzel, Kathryn R.; Wigfield, Allan

    2007-01-01

    We highlight major themes emerging from the articles in this special issue. These themes include (a) the importance of theoretical frameworks and clearly defined constructs for guiding the development of interventions, (b) a consideration of intervention effects on ethnic minority children, (c) the importance of positive social interactions and…

  1. [Professional confidentiality: speak out or remain silent? ].

    PubMed

    Daubigney, Jean-claude

    2014-01-01

    People who work with children, in their daily tasks, must choose whether to disclose information entrusted to them. However, they are subject to the law, which authorises or imposes speaking out or remaining silent. In terms of ethics, they can seek the best possible response while respecting professional secrecy when meeting an individual, in a situation, in a place or at a particular time. They must then take responsibility for that decision.

  2. Hot spots remain the exception

    SciTech Connect

    Not Available

    1987-08-01

    This article is a survey of the drilling activity and petroleum activity in Africa. The areas which seem to hold the highest promise for new discoveries or increased exports are Egypt's Western Desert which seems to offer the possibility of significant oil discoveries. In addition, Nigeria has dramatically increased its exploration activity which is counter to the global trend in 1986. Areas where activity is decreasing are Cameroon, South Africa. It is pointed out that the Gabon crude oil reserves may have been raised 60% by a single on-shore discovery.

  3. Eradication of measles: remaining challenges.

    PubMed

    Holzmann, Heidemarie; Hengel, Hartmut; Tenbusch, Matthias; Doerr, H W

    2016-06-01

    Measles virus (MeV) is an aerosol-borne and one of the most contagious pathogenic viruses known. Almost every MeV infection becomes clinically manifest and can lead to serious and even fatal complications, especially under conditions of malnutrition in developing countries, where still 115,000 to 160,000 patients die from measles every year. There is no specific antiviral treatment. In addition, MeV infections cause long-lasting memory B and T cell impairment, predisposing people susceptible to opportunistic infections for years. A rare, but fatal long-term consequence of measles is subacute sclerosing panencephalitis. Fifteen years ago (2001), WHO has launched a programme to eliminate measles by a worldwide vaccination strategy. This is promising, because MeV is a human-specific morbillivirus (i.e. without relevant animal reservoir), safe and potent vaccine viruses are sufficiently produced since decades for common application, and millions of vaccine doses have been used globally without any indications of safety and efficacy issues. Though the prevalence of wild-type MeV infection has decreased by >90 % in Europe, measles is still not eliminated and has even re-emerged with recurrent outbreaks in developed countries, in which effective vaccination programmes had been installed for decades. Here, we discuss the crucial factors for a worldwide elimination of MeV: (1) efficacy of current vaccines, (2) the extremely high contagiosity of MeV demanding a >95 % vaccination rate based on two doses to avoid primary vaccine failure as well as the installation of catch-up vaccination programmes to fill immunity gaps and to achieve herd immunity, (3) the implications of sporadic cases of secondary vaccine failure, (4) organisation, acceptance and drawbacks of modern vaccination campaigns, (5) waning public attention to measles, but increasing concerns from vaccine-associated adverse reactions in societies with high socio-economic standards and (6) clinical

  4. Why Do Some Cores Remain Starless?

    NASA Astrophysics Data System (ADS)

    Anathpindika, S.

    2016-08-01

    Prestellar cores, by definition, are gravitationally bound but starless pockets of dense gas. Physical conditions that could render a core starless (in the local Universe) is the subject of investigation in this work. To this end, we studied the evolution of four starless cores, B68, L694-2, L1517B, L1689, and L1521F, a VeLLO. We demonstrate: (i) cores contracted in quasistatic manner over a timescale on the order of ~ 105 yr. Those that remained starless briefly acquired a centrally concentrated density configuration that mimicked the profile of a unstable BonnorEbert sphere before rebounding, (ii) three cores viz. L694-2, L1689-SMM16, and L1521F remained starless despite becoming thermally super-critical. By contrast, B68 and L1517B remained sub-critical; L1521F collapsed to become a VeLLO only when gas-cooling was enhanced by increasing the size of dust-grains. This result is robust, for other starless cores viz. B68, L694-2, L1517B, and L1689 could also be similarly induced to collapse. The temperature-profile of starless cores and those that collapsed was found to be radically different. While in the former type, only very close to the centre of a core was there any evidence of decline in gas temperature, by contrast, a core of the latter type developed a more uniformly cold interior. Our principle conclusions are: (a) thermal super-criticality of a core is insufficient to ensure it will become protostellar, (b) potential star-forming cores (the VeLLO L1521F here), could be experiencing dust-coagulation that must enhance gasdust coupling and in turn lower gas temperature, thereby assisting collapse. This also suggests, mere gravitational/virial boundedness of a core is insufficient to ensure it will form stars.

  5. Shotgun microbial profiling of fossil remains.

    PubMed

    Der Sarkissian, C; Ermini, L; Jónsson, H; Alekseev, A N; Crubezy, E; Shapiro, B; Orlando, L

    2014-04-01

    Millions to billions of DNA sequences can now be generated from ancient skeletal remains thanks to the massive throughput of next-generation sequencing platforms. Except in cases of exceptional endogenous DNA preservation, most of the sequences isolated from fossil material do not originate from the specimen of interest, but instead reflect environmental organisms that colonized the specimen after death. Here, we characterize the microbial diversity recovered from seven c. 200- to 13 000-year-old horse bones collected from northern Siberia. We use a robust, taxonomy-based assignment approach to identify the microorganisms present in ancient DNA extracts and quantify their relative abundance. Our results suggest that molecular preservation niches exist within ancient samples that can potentially be used to characterize the environments from which the remains are recovered. In addition, microbial community profiling of the seven specimens revealed site-specific environmental signatures. These microbial communities appear to comprise mainly organisms that colonized the fossils recently. Our approach significantly extends the amount of useful data that can be recovered from ancient specimens using a shotgun sequencing approach. In future, it may be possible to correlate, for example, the accumulation of postmortem DNA damage with the presence and/or abundance of particular microbes.

  6. Looking east inside of casthouse no. 6 at the remains ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking east inside of casthouse no. 6 at the remains of slag runner and slag notch of blast furnace no. 6. - U.S. Steel Edgar Thomson Works, Blast Furnace Plant, Along Monongahela River, Braddock, Allegheny County, PA

  7. 1. SOUTHWEST FRONT AND SOUTHEAST SIDE OF BLACKSMITH SHOP REMAINS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. SOUTHWEST FRONT AND SOUTHEAST SIDE OF BLACKSMITH SHOP REMAINS, TENANT HOUSE IN BACKGROUND - Mount Etna Iron Works, Blacksmith Shop, East of U.S. Route 22 on T.R. 463, Williamsburg, Blair County, PA

  8. 60. NORTHEASTERN VIEW OF THE REMAINS OF THE DOROTHY SIX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    60. NORTHEASTERN VIEW OF THE REMAINS OF THE DOROTHY SIX BLAST FURNACE COMPLEX. (Martin Stupich) - U.S. Steel Duquesne Works, Blast Furnace Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  9. 59. REMAINS OF THE DOROTHY SIX BLAST FURNACE COMPLEX LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    59. REMAINS OF THE DOROTHY SIX BLAST FURNACE COMPLEX LOOKING NORTHEAST. THE LADLE HOUSE IS ON THE RIGHT. (Martin Stupich) - U.S. Steel Duquesne Works, Blast Furnace Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  10. Spatial patterning of vulture scavenged human remains.

    PubMed

    Spradley, M Katherine; Hamilton, Michelle D; Giordano, Alberto

    2012-06-10

    This article presents the results of a pilot study on the effects of vulture modification to human remains. A donated body from the Willed Body Donation Program was placed at the Forensic Anthropology Research Facility (FARF), an outdoor human decomposition laboratory located at Texas State University-San Marcos. The effects of vulture scavenging on the timing and sequence, and the rate of skeletonization, disarticulation, and dispersal were observed via a motion sensing camera and direct observation. Using GIS (Geographic Information Systems) and GPS (Global Positioning System) technologies and spatial analytical methods, the transport of skeletal elements was mapped in order to analyze dispersal and terrain-influenced patterns of active vulture scavenging. Results showed that the initial scavenging took place 37 days after placement at FARF. This delay in scavenging differs from previous research. After the initial appearance of the vultures, the body was reduced from a fully-fleshed individual to a skeleton within only 5h. This underscores the potential for errors in postmortem interval estimations made at vulture scavenged scenes. Additionally, spatial analysis showed that skeletal elements were dispersed by vultures to lower elevations, and that the disarticulation and dispersal of the skeletal elements occurs early in the scavenging sequence.

  11. An Assessment of the Model of Concentration Addition for Predicting the Estrogenic Activity of Chemical Mixtures in Wastewater Treatment Works Effluents

    PubMed Central

    Thorpe, Karen L.; Gross-Sorokin, Melanie; Johnson, Ian; Brighty, Geoff; Tyler, Charles R.

    2006-01-01

    The effects of simple mixtures of chemicals, with similar mechanisms of action, can be predicted using the concentration addition model (CA). The ability of this model to predict the estrogenic effects of more complex mixtures such as effluent discharges, however, has yet to be established. Effluents from 43 U.K. wastewater treatment works were analyzed for the presence of the principal estrogenic chemical contaminants, estradiol, estrone, ethinylestradiol, and nonylphenol. The measured concentrations were used to predict the estrogenic activity of each effluent, employing the model of CA, based on the relative potencies of the individual chemicals in an in vitro recombinant yeast estrogen screen (rYES) and a short-term (14-day) in vivo rainbow trout vitellogenin induction assay. Based on the measured concentrations of the four chemicals in the effluents and their relative potencies in each assay, the calculated in vitro and in vivo responses compared well and ranged between 3.5 and 87 ng/L of estradiol equivalents (E2 EQ) for the different effluents. In the rYES, however, the measured E2 EQ concentrations in the effluents ranged between 0.65 and 43 ng E2 EQ/L, and they varied against those predicted by the CA model. Deviations in the estimation of the estrogenic potency of the effluents by the CA model, compared with the measured responses in the rYES, are likely to have resulted from inaccuracies associated with the measurement of the chemicals in the extracts derived from the complex effluents. Such deviations could also result as a consequence of interactions between chemicals present in the extracts that disrupted the activation of the estrogen response elements in the rYES. E2 EQ concentrations derived from the vitellogenic response in fathead minnows exposed to a series of effluent dilutions were highly comparable with the E2 EQ concentrations derived from assessments of the estrogenic potency of these dilutions in the rYES. Together these data support the

  12. An assessment of the model of concentration addition for predicting the estrogenic activity of chemical mixtures in wastewater treatment works effluents.

    PubMed

    Thorpe, Karen L; Gross-Sorokin, Melanie; Johnson, Ian; Brighty, Geoff; Tyler, Charles R

    2006-04-01

    The effects of simple mixtures of chemicals, with similar mechanisms of action, can be predicted using the concentration addition model (CA). The ability of this model to predict the estrogenic effects of more complex mixtures such as effluent discharges, however, has yet to be established. Effluents from 43 U.K. wastewater treatment works were analyzed for the presence of the principal estrogenic chemical contaminants, estradiol, estrone, ethinylestradiol, and nonylphenol. The measured concentrations were used to predict the estrogenic activity of each effluent, employing the model of CA, based on the relative potencies of the individual chemicals in an in vitro recombinant yeast estrogen screen (rYES) and a short-term (14-day) in vivo rainbow trout vitellogenin induction assay. Based on the measured concentrations of the four chemicals in the effluents and their relative potencies in each assay, the calculated in vitro and in vivo responses compared well and ranged between 3.5 and 87 ng/L of estradiol equivalents (E2 EQ) for the different effluents. In the rYES, however, the measured E2 EQ concentrations in the effluents ranged between 0.65 and 43 ng E2 EQ/L, and they varied against those predicted by the CA model. Deviations in the estimation of the estrogenic potency of the effluents by the CA model, compared with the measured responses in the rYES, are likely to have resulted from inaccuracies associated with the measurement of the chemicals in the extracts derived from the complex effluents. Such deviations could also result as a consequence of interactions between chemicals present in the extracts that disrupted the activation of the estrogen response elements in the rYES. E2 EQ concentrations derived from the vitellogenic response in fathead minnows exposed to a series of effluent dilutions were highly comparable with the E2 EQ concentrations derived from assessments of the estrogenic potency of these dilutions in the rYES. Together these data support the

  13. Where do those remains come from?

    PubMed

    Nociarová, Dominika; Adserias, M Jose; Malgosa, Assumpció; Galtés, Ignasi

    2014-12-01

    Part of the study of skeletal remains or corpses in advance decay located in the field involves determining their origin. They may be the result of criminal activity, accident, unearthed because of erosion, or they may also have originated from a cemetery. The discovery site, condition of the remains, and the associated artifacts, are factors that could be helpful for the forensic anthropologist to identify the origin of the remains. In order to contribute to this recognition, an analysis was made of the exhumations of 168 unclaimed human remains from the cemetery of Terrassa (Catalonia, Spain). This investigation presents a description of artifacts and conditions of remains that could indicate that the human remains may have originated from a cemetery.

  14. A review of the work of the EU Reference Laboratory supporting the authorisation process of feed additives in the EU. [corrected].

    PubMed

    von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; González de la Huebra, María José; Ezerskis, Zigmas

    2016-01-01

    This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods.

  15. Scripts, Tricks and Capability Theory: Using an Empirical Window into the Logic of Achievement to Illustrate How a Critical Addition to Capability Theory Might Work to Guide Action

    ERIC Educational Resources Information Center

    Corrado, Gail

    2016-01-01

    Capability theory improves our understanding of well being because it takes account of the "conversion" problem: income/wealth/commodities. (IWCs) need to be made effectively available to really increase well being. However, just as IWCs need to be converted into functionings in order to be effective in bringing additional possibilities…

  16. Luminescence of thermally altered human skeletal remains.

    PubMed

    Krap, Tristan; Nota, Kevin; Wilk, Leah S; van de Goot, Franklin R W; Ruijter, Jan M; Duijst, Wilma; Oostra, Roelof-Jan

    2017-02-23

    Literature on luminescent properties of thermally altered human remains is scarce and contradictory. Therefore, the luminescence of heated bone was systemically reinvestigated. A heating experiment was conducted on fresh human bone, in two different media, and cremated human remains were recovered from a modern crematory. Luminescence was excited with light sources within the range of 350 to 560 nm. The excitation light was filtered out by using different long pass filters, and the luminescence was analysed by means of a scoring method. The results show that temperature, duration and surrounding medium determine the observed emission intensity and bandwidth. It is concluded that the luminescent characteristic of bone can be useful for identifying thermally altered human remains in a difficult context as well as yield information on the perimortem and postmortem events.

  17. Odor analysis of decomposing buried human remains

    SciTech Connect

    Vass, Arpad Alexander; Smith, Rob R; Thompson, Cyril V; Burnett, Michael N; Dulgerian, Nishan; Eckenrode, Brian A

    2008-01-01

    This study, conducted at the University of Tennessee's Anthropological Research Facility (ARF), lists and ranks the primary chemical constituents which define the odor of decomposition of human remains as detected at the soil surface of shallow burial sites. Triple sorbent traps were used to collect air samples in the field and revealed eight major classes of chemicals which now contain 478 specific volatile compounds associated with burial decomposition. Samples were analyzed using gas chromatography-mass spectrometry (GC-MS) and were collected below and above the body, and at the soil surface of 1.5-3.5 ft. (0.46-1.07 m) deep burial sites of four individuals over a 4-year time span. New data were incorporated into the previously established Decompositional Odor Analysis (DOA) Database providing identification, chemical trends, and semi-quantitation of chemicals for evaluation. This research identifies the 'odor signatures' unique to the decomposition of buried human remains with projected ramifications on human remains detection canine training procedures and in the development of field portable analytical instruments which can be used to locate human remains in shallow burial sites.

  18. Identification of ancient remains through genomic sequencing

    PubMed Central

    Blow, Matthew J.; Zhang, Tao; Woyke, Tanja; Speller, Camilla F.; Krivoshapkin, Andrei; Yang, Dongya Y.; Derevianko, Anatoly; Rubin, Edward M.

    2008-01-01

    Studies of ancient DNA have been hindered by the preciousness of remains, the small quantities of undamaged DNA accessible, and the limitations associated with conventional PCR amplification. In these studies, we developed and applied a genomewide adapter-mediated emulsion PCR amplification protocol for ancient mammalian samples estimated to be between 45,000 and 69,000 yr old. Using 454 Life Sciences (Roche) and Illumina sequencing (formerly Solexa sequencing) technologies, we examined over 100 megabases of DNA from amplified extracts, revealing unbiased sequence coverage with substantial amounts of nonredundant nuclear sequences from the sample sources and negligible levels of human contamination. We consistently recorded over 500-fold increases, such that nanogram quantities of starting material could be amplified to microgram quantities. Application of our protocol to a 50,000-yr-old uncharacterized bone sample that was unsuccessful in mitochondrial PCR provided sufficient nuclear sequences for comparison with extant mammals and subsequent phylogenetic classification of the remains. The combined use of emulsion PCR amplification and high-throughput sequencing allows for the generation of large quantities of DNA sequence data from ancient remains. Using such techniques, even small amounts of ancient remains with low levels of endogenous DNA preservation may yield substantial quantities of nuclear DNA, enabling novel applications of ancient DNA genomics to the investigation of extinct phyla. PMID:18426903

  19. The case for fencing remains intact.

    PubMed

    Packer, C; Swanson, A; Canney, S; Loveridge, A; Garnett, S; Pfeifer, M; Burton, A C; Bauer, H; MacNulty, D

    2013-11-01

    Creel et al. argue against the conservation effectiveness of fencing based on a population measure that ignores the importance of top predators to ecosystem processes. Their statistical analyses consider, first, only a subset of fenced reserves and, second, an incomplete examination of 'costs per lion.' Our original conclusions remain unaltered.

  20. Predicting the remaining service life of concrete

    SciTech Connect

    Clifton, J.F.

    1991-11-01

    Nuclear power plants are providing, currently, about 17 percent of the U.S. electricity and many of these plants are approaching their licensed life of 40 years. The U.S. Nuclear Regulatory Commission and the Department of Energy`s Oak Ridge National Laboratory are carrying out a program to develop a methodology for assessing the remaining safe-life of the concrete components and structures in nuclear power plants. This program has the overall objective of identifying potential structural safety issues, as well as acceptance criteria, for use in evaluations of nuclear power plants for continued service. The National Institute of Standards and Technology (NIST) is contributing to this program by identifying and analyzing methods for predicting the remaining life of in-service concrete materials. This report examines the basis for predicting the remaining service lives of concrete materials of nuclear power facilities. Methods for predicting the service life of new and in-service concrete materials are analyzed. These methods include (1) estimates based on experience, (2) comparison of performance, (3) accelerated testing, (4) stochastic methods, and (5) mathematical modeling. New approaches for predicting the remaining service lives of concrete materials are proposed and recommendations for their further development given. Degradation processes are discussed based on considerations of their mechanisms, likelihood of occurrence, manifestations, and detection. They include corrosion, sulfate attack, alkali-aggregate reactions, frost attack, leaching, radiation, salt crystallization, and microbiological attack.

  1. Odor analysis of decomposing buried human remains.

    PubMed

    Vass, Arpad A; Smith, Rob R; Thompson, Cyril V; Burnett, Michael N; Dulgerian, Nishan; Eckenrode, Brian A

    2008-03-01

    This study, conducted at the University of Tennessee's Anthropological Research Facility (ARF), lists and ranks the primary chemical constituents which define the odor of decomposition of human remains as detected at the soil surface of shallow burial sites. Triple sorbent traps were used to collect air samples in the field and revealed eight major classes of chemicals which now contain 478 specific volatile compounds associated with burial decomposition. Samples were analyzed using gas chromatography-mass spectrometry (GC-MS) and were collected below and above the body, and at the soil surface of 1.5-3.5 ft. (0.46-1.07 m) deep burial sites of four individuals over a 4-year time span. New data were incorporated into the previously established Decompositional Odor Analysis (DOA) Database providing identification, chemical trends, and semi-quantitation of chemicals for evaluation. This research identifies the "odor signatures" unique to the decomposition of buried human remains with projected ramifications on human remains detection canine training procedures and in the development of field portable analytical instruments which can be used to locate human remains in shallow burial sites.

  2. 17. DETAIL OF THE REMAINS OF BLAST FURNACE No. 2 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. DETAIL OF THE REMAINS OF BLAST FURNACE No. 2 LOOKING EAST. THE BUSTLE PIPE IS VISIBLE ACROSS THE CENTER OF THE IMAGE. (Jet Lowe) - U.S. Steel Duquesne Works, Blast Furnace Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  3. 15. NORTHERN VIEW OF THE REMAINS OF BLAST FURNACE No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. NORTHERN VIEW OF THE REMAINS OF BLAST FURNACE No. 2 IN LOWER CENTER OF PHOTO AT THE BASE OF HOT BLAST STOVES. HOIST HOUSE No. 2 IS ON THE LEFT. (Martin Stupich) - U.S. Steel Duquesne Works, Blast Furnace Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  4. 8. NORTHWEST VIEW OF REMAINS OF CAST HOUSE No. 2. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. NORTHWEST VIEW OF REMAINS OF CAST HOUSE No. 2. BLAST FURNACE No. 1 IS ON THE RIGHT, AND HOIST HOUSE No. 2 IS ON THE LEFT. (Martin Stupich) - U.S. Steel Duquesne Works, Blast Furnace Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  5. 3. GENERAL VIEW OF REMAINS OF 40" BLOOMING MILL; THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. GENERAL VIEW OF REMAINS OF 40" BLOOMING MILL; THE ENGINE ROOM CONTAINING THE MESTA-CORLISS STEAM ENGINE, IS LOCATED AT THE FAR END OF THE MILL AS SEEN TO THE FAR RIGHT (THE BUILDING WITH THE SHED ROOF). - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

  6. 19. REMAINS OF FLYWHEEL OF No. 1 PRESS PUMPING ENGINE. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. REMAINS OF FLYWHEEL OF No. 1 PRESS PUMPING ENGINE. GEARS ON EITHER SIDE OF THE FLYWHEEL WERE TURNED INTERMEDIATE GEARS WHICH POWERED THE PUMPS. - U.S. Steel Homestead Works, Press Shop No. 1, Along Monongahela River, Homestead, Allegheny County, PA

  7. Explosives remain preferred methods for platform abandonment

    SciTech Connect

    Pulsipher, A.; Daniel, W. IV; Kiesler, J.E.; Mackey, V. III

    1996-05-06

    Economics and safety concerns indicate that methods involving explosives remain the most practical and cost-effective means for abandoning oil and gas structures in the Gulf of Mexico. A decade has passed since 51 dead sea turtles, many endangered Kemp`s Ridleys, washed ashore on the Texas coast shortly after explosives helped remove several offshore platforms. Although no relationship between the explosions and the dead turtles was ever established, in response to widespread public concern, the US Minerals Management Service (MMS) and National Marine Fisheries Service (NMFS) implemented regulations limiting the size and timing of explosive charges. Also, more importantly, they required that operators pay for observers to survey waters surrounding platforms scheduled for removal for 48 hr before any detonations. If observers spot sea turtles or marine mammals within the danger zone, the platform abandonment is delayed until the turtles leave or are removed. However, concern about the effects of explosives on marine life remains.

  8. Becoming and remaining homeless: a qualitative investigation.

    PubMed

    Morrell-Bellai, T; Goering, P N; Boydell, K M

    2000-09-01

    This article reports the qualitative findings of a multimethod study of the homeless population in Toronto, Canada. The qualitative component sought to identify how people become homeless and why some individuals remain homeless for an extended period of time or cycle in and out of homelessness (the chronically homeless). In-depth, semistructured interviews were conducted with 29 homeless adults. The findings suggest that people both become and remain homeless due to a combination of macro level factors (poverty, lack of employment, low welfare wages, lack of affordable housing) and personal vulnerability (childhood abuse or neglect, mental health symptoms, impoverished support networks, substance abuse). Chronically homeless individuals often reported experiences of severe childhood trauma and tended to attribute their continued homelessness to a substance abuse problem. It is concluded that both macro and individual level factors must be considered in planning programs and services to address the issue of homelessness in Canada.

  9. Mill and the right to remain uninformed.

    PubMed

    Strasser, M

    1986-08-01

    In a recent article in the Journal of Medicine and Philosophy, David Ost (1984) claims that patients do not have a right to waive their right to information. He argues that patients cannot make informed rational decisions without full information and thus, a right to waive information would involve a right to avoid one's responsibility to act as an autonomous moral agent. In support of his position, Ost cites a passage from Mill. Yet, a correct interpretation of the passage in question would support one's right to remain uninformed in certain situations. If the information would hurt one's chances for survival or hurt one's ability to make calm, rational decisions, then one not only does not have a duty to find out the information, but one's exercising one's right to remain uninformed may be the only rational course of action to take.

  10. Solving the Big Data (BD) Problem in Advanced Manufacturing (Subcategory for work done at Georgia Tech. Study Process and Design Factors for Additive Manufacturing Improvement)

    SciTech Connect

    Clark, Brett W.; Diaz, Kimberly A.; Ochiobi, Chinaza Darlene; Paynabar, Kamran

    2015-09-01

    3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.

  11. 13 percent remain AIDS-free.

    PubMed

    1995-01-01

    Researchers predict that approximately thirteen percent of homosexual/bisexual men infected with HIV at an early age will be long-term survivors, remaining free of disease for more than twenty years. Researchers with the Multicenter AIDS Cohort Study based their predictions on data from the ongoing study of 1,809 HIV-positive men. Stable immune markers and no use of antiretrovirals were the criteria used to define long-term.

  12. Direct Dating of Hominids Remains In Eurasia

    NASA Astrophysics Data System (ADS)

    Yokoyama, Y.; Falguères, C.

    When archaeological sites are associated with human remains, it is relevant to be able to date those valuable remains for different reasons. The main one is that it avoids the stratigraphical problems which can be due to intrusive burials in the sequence. The other reason consists in the fact that human bones may be encountered out of established stratigraphical context. On the other hand, the majority of dating methods currently used are destructive and can not be applied on these precious samples particularly when they are older than 40,000 years and can not be dated by radiocarbon. Since several years, we have developped a completely non-destructive method which consists in the measurement of human remains using the gamma -ray spectrometry. This technique has been used recently by other laboratories. We present here two important cases for the knowledge of human evolution in Eurasia. The first example is Qafzeh site in Israel where many human skeletons have been unearthed from burials associated with fauna and lithic artefacts. This site has been dated by several independent radiometric methods. So, it was possible to compare our gamma results with the other results yielded by the different methods. The second case concerns the most evolved Homo erectus found in Java, Indonesia, at Ngandong site, close to the Solo river. A recent debate has been focused on the age of these fossils and their direct dating is of outmost importance for the knowledge of settlement of Modern Humans in South-East Asia.

  13. Distribution of albatross remains in the Far East regions during the Holocene, based on zooarchaeological remains.

    PubMed

    Eda, Masaki; Higuchi, Hiroyoshi

    2004-07-01

    Many albatross remains have been found in the Japanese Islands and the surrounding areas, such as Sakhalin and South Korea. These remains are interesting for two reasons: numerous sites from which albatross remains have been found are located in coastal regions of the Far East where no albatrosses have been distributed recently, and there are some sites in which albatross remains represent a large portion of avian remains, although albatrosses are not easily preyed upon by human beings. We collected data on albatross remains from archaeological sites in the Far East regions during the Holocene and arranged the remains geographically, temporally and in terms of quantity. Based on these results, we showed that coastal areas along the Seas of Okhotsk and Japan have rarely been used by albatrosses in Modern times, though formerly there were many albatrosses. We proposed two explanations for the shrinkage of their distributional range: excessive hunting in the breeding areas, and distributional changes of prey for albatrosses.

  14. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  15. 51-L Challenger Crew Remains Transferred

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The Challenger crewmember remains are being transferred from 7 hearse vehicles to a MAC C-141 transport plane at the Kennedy Space Center's Shuttle Landing Facility for transport to Dover Air Force Base, Delaware. The STS-51L crew consisted of: Mission Specialist, Ellison S. Onizuka, Teacher in Space Participant Sharon Christa McAuliffe, Payload Specialist, Greg Jarvis and Mission Specialist, Judy Resnik. In the front row from left to right: Pilot Mike Smith, Commander, Dick Scobee and Mission Specialist, Ron McNair.

  16. Characterization of the volatile organic compounds present in the headspace of decomposing animal remains, and compared with human remains.

    PubMed

    Cablk, Mary E; Szelagowski, Erin E; Sagebiel, John C

    2012-07-10

    Human Remains Detection (HRD) dogs can be a useful tool to locate buried human remains because they rely on olfactory rather than visual cues. Trained specifically to locate deceased humans, it is widely believed that HRD dogs can differentiate animal remains from human remains. This study analyzed the volatile organic compounds (VOCs) present in the headspace above partially decomposed animal tissue samples and directly compared them with results published from human tissues using established solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS) methods. Volatile organic compounds present in the headspace of four different animal tissue samples (bone, muscle, fat and skin) from each of cow, pig and chicken were identified and compared to published results from human samples. Although there were compounds common to both animal and human remains, the VOC signatures of each of the animal remains differed from those of humans. Of particular interest was the difference between pigs and humans, because in some countries HRD dogs are trained on pig remains rather than human remains. Pig VOC signatures were not found to be a subset of human; in addition to sharing only seven of thirty human-specific compounds, an additional nine unique VOCs were recorded from pig samples which were not present in human samples. The VOC signatures from chicken and human samples were most similar sharing the most compounds of the animals studied. Identifying VOCs that are unique to humans may be useful to develop human-specific training aids for HRD canines, and may eventually lead to an instrument that can detect clandestine human burial sites.

  17. So close: remaining challenges to eradicating polio.

    PubMed

    Toole, Michael J

    2016-03-14

    The Global Polio Eradication Initiative, launched in 1988, is close to achieving its goal. In 2015, reported cases of wild poliovirus were limited to just two countries - Afghanistan and Pakistan. Africa has been polio-free for more than 18 months. Remaining barriers to global eradication include insecurity in areas such as Northwest Pakistan and Eastern and Southern Afghanistan, where polio cases continue to be reported. Hostility to vaccination is either based on extreme ideologies, such as in Pakistan, vaccination fatigue by parents whose children have received more than 15 doses, and misunderstandings about the vaccine's safety and effectiveness such as in Ukraine. A further challenge is continued circulation of vaccine-derived poliovirus in populations with low immunity, with 28 cases reported in 2015 in countries as diverse as Madagascar, Ukraine, Laos, and Myanmar. This paper summarizes the current epidemiology of wild and vaccine-derived poliovirus, and describes the remaining challenges to eradication and innovative approaches being taken to overcome them.

  18. Decomposition Technique for Remaining Useful Life Prediction

    NASA Technical Reports Server (NTRS)

    Saha, Bhaskar (Inventor); Goebel, Kai F. (Inventor); Saxena, Abhinav (Inventor); Celaya, Jose R. (Inventor)

    2014-01-01

    The prognostic tool disclosed here decomposes the problem of estimating the remaining useful life (RUL) of a component or sub-system into two separate regression problems: the feature-to-damage mapping and the operational conditions-to-damage-rate mapping. These maps are initially generated in off-line mode. One or more regression algorithms are used to generate each of these maps from measurements (and features derived from these), operational conditions, and ground truth information. This decomposition technique allows for the explicit quantification and management of different sources of uncertainty present in the process. Next, the maps are used in an on-line mode where run-time data (sensor measurements and operational conditions) are used in conjunction with the maps generated in off-line mode to estimate both current damage state as well as future damage accumulation. Remaining life is computed by subtracting the instance when the extrapolated damage reaches the failure threshold from the instance when the prediction is made.

  19. How Employees Remain Happy: Explaining a Paradox

    ERIC Educational Resources Information Center

    Hutton, Dorothy M.; Atkinson, Barbara; Judd, Priya; Darling, Julie; Tran, Linh; Cummins, Robert A.

    2004-01-01

    This paper draws on subjective quality of life theory to explain findings from three studies of quality of work life. The studies were conducted with 346 regional process workers, metropolitan employment officers and nurses. The results support the adoption of the theory of homeostasis as an explanation for findings on subjective wellbeing at work…

  20. Some remaining problems in HCDA analysis. [LMFBR

    SciTech Connect

    Chang, Y.W.

    1981-01-01

    The safety assessment and licensing of liquid-metal fast breeder reactors (LMFBRs) requires an analysis on the capability of the reactor primary system to sustain the consequences of a hypothetical core-disruptive accident (HCDA). Although computational methods and computer programs developed for HCDA analyses can predict reasonably well the response of the primary containment system, and follow up the phenomena of HCDA from the start of excursion to the time of dynamic equilibrium in the system, there remain areas in the HCDA analysis that merit further analytical and experimental studies. These are the analysis of fluid impact on reactor cover, three-dimensional analysis, the treatment of the perforated plates, material properties under high strain rates and under high temperatures, the treatment of multifield flows, and the treatment of prestressed concrete reactor vessels. The purpose of this paper is to discuss the structural mechanics of HCDA analysis in these areas where improvements are needed.

  1. Does hypertension remain after kidney transplantation?

    PubMed

    Pourmand, Gholamreza; Dehghani, Sanaz; Rahmati, Mohamad Reza; Mehrsai, Abdolrasoul; Gooran, Shahram; Alizadeh, Farimah; Khaki, Siavash; Mortazavi, Seyede Hamideh; Pourmand, Naghmeh

    2015-01-01

    Hypertension is a common complication of kidney transplantation with the prevalence of 80%. Studies in adults have shown a high prevalence of hypertension (HTN) in the first three months of transplantation while this rate is reduced to 50- 60% at the end of the first year. HTN remains as a major risk factor for cardiovascular diseases, lower graft survival rates and poor function of transplanted kidney in adults and children. In this retrospective study, medical records of 400 kidney transplantation patients of Sina Hospital were evaluated. Patients were followed monthly for the 1st year, every two months in the 2nd year and every three months after that. In this study 244 (61%) patients were male. Mean ± SD age of recipients was 39.3 ± 13.8 years. In most patients (40.8%) the cause of end-stage renal disease (ESRD) was unknown followed by HTN (26.3%). A total of 166 (41.5%) patients had been hypertensive before transplantation and 234 (58.5%) had normal blood pressure. Among these 234 individuals, 94 (40.2%) developed post-transplantation HTN. On the other hand, among 166 pre-transplant hypertensive patients, 86 patients (56.8%) remained hypertensive after transplantation. Totally 180 (45%) patients had post-transplantation HTN and 220 patients (55%) didn't develop HTN. Based on the findings, the incidence of post-transplantation hypertension is high, and kidney transplantation does not lead to remission of hypertension. On the other hand, hypertension is one of the main causes of ESRD. Thus, early screening of hypertension can prevent kidney damage and reduce further problems in renal transplant recipients.

  2. A novel approach of remaining discharge energy prediction for large format lithium-ion battery pack

    NASA Astrophysics Data System (ADS)

    Zhang, Xu; Wang, Yujie; Liu, Chang; Chen, Zonghai

    2017-03-01

    Accurate estimation of battery pack remaining discharge energy is a crucial challenge to the battery energy storage systems. In this paper, a new method of battery pack remaining discharge energy estimation is proposed using the recursive least square-unscented Kalman filter. To predict the remaining discharge energy precisely, the inconsistency of the battery pack caused by different working temperatures is taken into consideration and the degree of battery inconsistency is quantified based on mathematical methods of statistics. In addition, the recursive least square is applied to identify the parameters of the battery pack model on-line and the unscented Kalman filter is employed in battery pack remaining discharge energy and energy utilization ratio estimation. The experimental results in terms of battery states estimation under the new European driving cycle and real driven profiles, with the root mean square error less than 0.01, further verify that the proposed method can estimate the battery pack remaining discharge energy with high accuracy. What's more, the relationship between the pack energy utilization ratio and the degree of battery inconsistency is summarized in the paper.

  3. Electricity remains a serious workplace hazard.

    PubMed

    Proctor, Laura; Kuchibotla, Srin

    2013-08-01

    Anyone who works in an industrial environment or is employed in the utility, mass transit, industrial goods manufacturing, or telecommunications industry - as well as many others - may be at risk for electrocution. Electric shock costs workers' lives and results in painful and debilitating injuries every year. Lockout/tagout procedures protect against electrocution, as do rubber insulating gloves, which must be worn any time workers are exposed to energized parts operating at 50 volts or higher. Some newer styles of rubber insulating gloves not only protect against electric shock, but also offer the dexterity and flexibility workers need for hours of comfortable wear.

  4. Smart Point Cloud: Definition and Remaining Challenges

    NASA Astrophysics Data System (ADS)

    Poux, F.; Hallot, P.; Neuville, R.; Billen, R.

    2016-10-01

    Dealing with coloured point cloud acquired from terrestrial laser scanner, this paper identifies remaining challenges for a new data structure: the smart point cloud. This concept arises with the statement that massive and discretized spatial information from active remote sensing technology is often underused due to data mining limitations. The generalisation of point cloud data associated with the heterogeneity and temporality of such datasets is the main issue regarding structure, segmentation, classification, and interaction for an immediate understanding. We propose to use both point cloud properties and human knowledge through machine learning to rapidly extract pertinent information, using user-centered information (smart data) rather than raw data. A review of feature detection, machine learning frameworks and database systems indexed both for mining queries and data visualisation is studied. Based on existing approaches, we propose a new 3-block flexible framework around device expertise, analytic expertise and domain base reflexion. This contribution serves as the first step for the realisation of a comprehensive smart point cloud data structure.

  5. Organic Remains in Finnish Subglacial Sediments

    NASA Astrophysics Data System (ADS)

    Punkari, Mikko; Forsström, Lars

    1995-05-01

    Many sites in Fennoscandia contain pre-Late Weichselian beds of organic matter, located mostly in the flanks of eskers. It is a matter of debate whether these fragmentary beds were deposited in situ, or whether they were deposited elsewhere and then picked up and moved by glacial ice. The till-mantled esker of Harrinkangas includes a shallow depression filled with sand and silt containing, for example, several tightly packed laminar sheets of brown moss ( Bryales) remains. It is argued that these thin peat sheets were transported at the base of the ice sheet, or englacially, and were deposited together with the silt and sand on the side of a subglacial meltwater tunnel. Subglacial meltout till subsequently covered the flanks of the esker near the receding ice margin. Information about the depositional and climatic environments was obtained from biostratigraphic analysis of the organic matter. Pollen spectra for the peat represent an open birch forest close to the tundra zone. A thin diamicton beneath the peat contains charred pine wood, recording the former presence of pine forests in western Finland. The unhumified, extremely well-preserved peat evidently originated during the final phase of an ice-free period, most probably the end of the Eemian Interglaciation. It was redeposited in the esker by the last ice sheet. Reconstructions of the Pleistocene chronology and stratigraphy of central Fennoscandia that rely on such redeposited organic matter should be viewed with caution.

  6. Food additives

    MedlinePlus

    ... or natural. Natural food additives include: Herbs or spices to add flavor to foods Vinegar for pickling ... Certain colors improve the appearance of foods. Many spices, as well as natural and man-made flavors, ...

  7. New Evidence Links Stellar Remains to Oldest Recorded Supernova

    NASA Astrophysics Data System (ADS)

    2006-09-01

    Recent observations have uncovered evidence that helps to confirm the identification of the remains of one of the earliest stellar explosions recorded by humans. The new study shows that the supernova remnant RCW 86 is much younger than previously thought. As such, the formation of the remnant appears to coincide with a supernova observed by Chinese astronomers in 185 A.D. The study used data from NASA's Chandra X-ray Observatory and the European Space Agency's XMM-Newton Observatory, "There have been previous suggestions that RCW 86 is the remains of the supernova from 185 A.D.," said Jacco Vink of University of Utrecht, the Netherlands, and lead author of the study. "These new X-ray data greatly strengthen the case." When a massive star runs out of fuel, it collapses on itself, creating a supernova that can outshine an entire galaxy. The intense explosion hurls the outer layers of the star into space and produces powerful shock waves. The remains of the star and the material it encounters are heated to millions of degrees and can emit intense X-ray radiation for thousands of years. Animation of a Massive Star Explosion Animation of a Massive Star Explosion In their stellar forensic work, Vink and colleagues studied the debris in RCW 86 to estimate when its progenitor star originally exploded. They calculated how quickly the shocked, or energized, shell is moving in RCW 86, by studying one part of the remnant. They combined this expansion velocity with the size of the remnant and a basic understanding of how supernovas expand to estimate the age of RCW 86. "Our new calculations tell us the remnant is about 2,000 years old," said Aya Bamba, a coauthor from the Institute of Physical and Chemical Research (RIKEN), Japan. "Previously astronomers had estimated an age of 10,000 years." The younger age for RCW 86 may explain an astronomical event observed almost 2000 years ago. In 185 AD, Chinese astronomers (and possibly the Romans) recorded the appearance of a new

  8. Ghost Remains After Black Hole Eruption

    NASA Astrophysics Data System (ADS)

    2009-05-01

    NASA's Chandra X-ray Observatory has found a cosmic "ghost" lurking around a distant supermassive black hole. This is the first detection of such a high-energy apparition, and scientists think it is evidence of a huge eruption produced by the black hole. This discovery presents astronomers with a valuable opportunity to observe phenomena that occurred when the Universe was very young. The X-ray ghost, so-called because a diffuse X-ray source has remained after other radiation from the outburst has died away, is in the Chandra Deep Field-North, one of the deepest X-ray images ever taken. The source, a.k.a. HDF 130, is over 10 billion light years away and existed at a time 3 billion years after the Big Bang, when galaxies and black holes were forming at a high rate. "We'd seen this fuzzy object a few years ago, but didn't realize until now that we were seeing a ghost", said Andy Fabian of the Cambridge University in the United Kingdom. "It's not out there to haunt us, rather it's telling us something - in this case what was happening in this galaxy billions of year ago." Fabian and colleagues think the X-ray glow from HDF 130 is evidence for a powerful outburst from its central black hole in the form of jets of energetic particles traveling at almost the speed of light. When the eruption was ongoing, it produced prodigious amounts of radio and X-radiation, but after several million years, the radio signal faded from view as the electrons radiated away their energy. HDF 130 Chandra X-ray Image of HDF 130 However, less energetic electrons can still produce X-rays by interacting with the pervasive sea of photons remaining from the Big Bang - the cosmic background radiation. Collisions between these electrons and the background photons can impart enough energy to the photons to boost them into the X-ray energy band. This process produces an extended X-ray source that lasts for another 30 million years or so. "This ghost tells us about the black hole's eruption long after

  9. Ciguatera: recent advances but the risk remains.

    PubMed

    Lehane, L; Lewis, R J

    2000-11-01

    Ciguatera is an important form of human poisoning caused by the consumption of seafood. The disease is characterised by gastrointestinal, neurological and cardiovascular disturbances. In cases of severe toxicity, paralysis, coma and death may occur. There is no immunity, and the toxins are cumulative. Symptoms may persist for months or years, or recur periodically. The epidemiology of ciguatera is complex and of central importance to the management and future use of marine resources. Ciguatera is an important medical entity in tropical and subtropical Pacific and Indian Ocean regions, and in the tropical Caribbean. As reef fish are increasingly exported to other areas, it has become a world health problem. The disease is under-reported and often misdiagnosed. Lipid-soluble, polyether toxins known as ciguatoxins accumulated in the muscles of certain subtropical and tropical marine finfish cause ciguatera. Ciguatoxins arise from biotransformation in the fish of less polar ciguatoxins (gambiertoxins) produced by Gambierdiscus toxicus, a marine dinoflagellate that lives on macroalgae, usually attached to dead coral. The toxins and their metabolites are concentrated in the food chain when carnivorous fish prey on smaller herbivorous fish. Humans are exposed at the end of the food chain. More than 400 species of fish can be vectors of ciguatoxins, but generally only a relatively small number of species are regularly incriminated in ciguatera. Ciguateric fish look, taste and smell normal, and detection of toxins in fish remains a problem. More than 20 precursor gambiertoxins and ciguatoxins have been identified in G. toxicus and in herbivorous and carnivorous fish. The toxins become more polar as they undergo oxidative metabolism and pass up the food chain. The main Pacific ciguatoxin (P-CTX-1) causes ciguatera at levels=0.1 microg/kg in the flesh of carnivorous fish. The main Caribbean ciguatoxin (C-CTX-1) is less polar and 10-fold less toxic than P-CTX-1. Ciguatoxins

  10. Hospital nurses' intentions to remain: exploring a northern context.

    PubMed

    Tallman, Rick; Bruning, Nealia S

    2005-01-01

    Retaining nurses is of significant concern to all hospitals but even more of a concern to northern and rural hospital managers. This study provides insights into factors related to nurses' intentions to remain. A sample of 122 nurses from 13 northern hospitals in Western Canada participated in the study. The nurses completed questionnaires and participated in structured interviews. A model was proposed which suggested that work experiences (job and decision latitude, feedback, perceptions of how viewed and treated by others, fairness of policies, and safety of the job environment) would be related to job satisfaction and then affective commitment. Age and tenure, and ties to the community were proposed as predictors of continuance commitment. Both affective and continuance commitments were expected to be related to intention to remain in the hospital. The model was partially supported by regression analyses. Work experiences predicted job satisfaction and affective commitment. Affective commitment, continuance commitment, and ties to the community are related to nurses' intentions to remain. Supplemental analyses indicated that the strongest relationships were found for management's views and treatment of nurses, knowledge and ability utilization, safe environment, and fairness of organizational policies.

  11. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  12. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  13. Late Pleistocene human remains from Wezmeh Cave, western Iran.

    PubMed

    Trinkaus, Erik; Biglari, Fereidoun; Mashkour, Marjan; Monchot, Hervé; Reyss, Jean-Louis; Rougier, Hélène; Heydari, Saman; Abdi, Kamyar

    2008-04-01

    Paleontological analysis of remains from Wezmeh Cave in western Iran have yielded a Holocene Chalcolithic archeological assemblage, a rich Late Pleistocene carnivore faunal assemblage, and an isolated unerupted human maxillary premolar (P(3) or possibly P(4)). Species representation and U-series dating of faunal teeth place the carnivore assemblage during oxygen isotope stages (OIS) 3 and 2, and noninvasive gamma spectrometry dating of the human premolar places it at least as old as early OIS 2. The human premolar crown morphology is not diagnostic of late archaic versus early modern human affinities, but its buccolingual diameter places it at the upper limits of Late Pleistocene human P(3) and P(4) dimensions and separate from a terminal Pleistocene regional sample. Wezmeh Cave therefore provides additional Paleolithic human remains from the Zagros Mountains and further documents Late Pleistocene human association with otherwise carnivore-dominated cave assemblages.

  14. An Update on the Hazards and Risks of Forensic Anthropology, Part I: Human Remains.

    PubMed

    Roberts, Lindsey G; Dabbs, Gretchen R; Spencer, Jessica R

    2016-01-01

    This work reviews the hazards and risks of practicing forensic anthropology in North America, with a focus on pathogens encountered through contact with unpreserved human remains. Since the publication of Galloway and Snodgrass' seminal paper concerning the hazards of forensic anthropology, research has provided new information about known pathogen hazards, and regulating authorities have updated recommendations for the recognition and treatment of several infections. Additionally, forensic anthropology has gained popularity, exposing an increased number of students and practitioners to these hazards. Current data suggest many occupational exposures to blood or body fluids go unreported, especially among students, highlighting the need for this discussion. For each pathogen and associated disease, this work addresses important history, reviews routes of exposure, provides an overview of symptoms and treatments, lists decontamination procedures, and presents data on postmortem viability. Personal protection and laboratory guidelines should be established and enforced in conjunction with the consideration of these data.

  15. Spinal diastematomyelia: a means of identification of charred remains.

    PubMed

    Beggan, Caitlin; Towers, Mark; Farrell, Michael; Jaber, Khalid

    2014-01-01

    The purpose of medico legal autopsy examination is the positive identification of the deceased in addition to the determination of the cause of death in most jurisdictions and additionally the manner of death in many jurisdictions. Notwithstanding the established and recognised value of DNA analysis in human identification, in the case of significant and extensive thermal injury in victims of fire, DNA analysis may prove difficult. Fire fatality identification can be assisted by alternative methods in this situation, including correlation between ante mortem and post mortem radiological investigations, identification of rare medical disease and or dental record examinations, where available. We describe a case where identification of charred human remains from a car fire was securely determined by demonstration of the presence of a rare congenital abnormality of the spinal cord, Diastematomyelia.

  16. Microsatellites identify depredated waterfowl remains from glaucous gull stomachs

    USGS Publications Warehouse

    Scribner, K.T.; Bowman, Timothy D.

    1998-01-01

    Prey remains can provide valuable sources of information regarding causes of predation and the species composition of a predator's diet. Unfortunately, the highly degraded state of many prey samples from gastrointestinal tracts often precludes unambiguous identification. We describe a procedure by which PCR amplification of taxonomically informative microsatellite loci were used to identify species of waterfowl predated by glaucous gulls (Larus hyperboreus). We found that one microsatellite locus unambiguously distinguished between species of the subfamily Anserinae (whistling ducks, geese and swans) and those of the subfamily Anatidae (all other ducks). An additional locus distinguished the remains of all geese and swan species known to nest on the Yukon-Kuskokwim delta in western Alaska. The study focused on two waterfowl species which have experienced precipitous declines in population numbers: emperor geese (Chen canagica) and spectacled eiders (Somateria fischeri). No evidence of predation on spectacled eiders was observed. Twenty-six percent of all glaucous gull stomachs examined contained the remains of juvenile emperor geese.

  17. Choosing and remaining in mental health nursing: perceptions of Western Australian nurses.

    PubMed

    Harrison, Carole A; Hauck, Yvonne; Hoffman, Rosemary

    2014-12-01

    Mental health nursing has an ageing workforce with a critical shortage of nurses in Western Australia. Additionally, mental health is not the preferred career for many graduate nurses. Current challenges with recruitment and retention suggest that strategies are needed to address this issue. This research project adopted a novel approach that focused on exploring the positive aspects of why mental health nurses remain, rather than why they leave. A cross-sectional design was employed comprising a brief interview survey, and nurses working within one public mental health service in Western Australia were invited to participate. A total of 192 nurses participated across 5 months, from adult, older adult, forensic, and education/research programmes. Thematic analysis was conducted from five key questions, and responses from questions one and two are discussed in this paper: 'Why did you choose mental health nursing?' and 'Why do you remain in mental health nursing?'. The main themes extracted in response to choosing mental health nursing were wanting to make a difference, mental health captured my interest, encouraged by others, and opportunities. Subsequent themes extracted from responses to remaining in mental health nursing were facing reality, passion for mental health nursing, patient-centred caring, and workplace conditions. Findings will be utilized to inform strategies for recruitment and retention of graduate nurses; further development of support systems, such as preceptorship training and improving student clinical experiences; as well as improving professional development opportunities for existing mental health nurses.

  18. 43 CFR 4730.2 - Disposal of remains.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HORSES AND BURROS Destruction of Wild Horses or Burros and Disposal of Remains § 4730.2 Disposal of remains. Remains of wild horses or burros that die after capture shall be disposed of in accordance...

  19. 43 CFR 4730.2 - Disposal of remains.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HORSES AND BURROS Destruction of Wild Horses or Burros and Disposal of Remains § 4730.2 Disposal of remains. Remains of wild horses or burros that die after capture shall be disposed of in accordance...

  20. 43 CFR 4730.2 - Disposal of remains.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HORSES AND BURROS Destruction of Wild Horses or Burros and Disposal of Remains § 4730.2 Disposal of remains. Remains of wild horses or burros that die after capture shall be disposed of in accordance...

  1. 43 CFR 4730.2 - Disposal of remains.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HORSES AND BURROS Destruction of Wild Horses or Burros and Disposal of Remains § 4730.2 Disposal of remains. Remains of wild horses or burros that die after capture shall be disposed of in accordance...

  2. OVERVIEW OF CYANIDE PLANT REMAINS, TAILINGS PILES, PARKING LOT, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OVERVIEW OF CYANIDE PLANT REMAINS, TAILINGS PILES, PARKING LOT, AND MINE MANAGER'S HOME, LOOKING SOUTH SOUTHEAST. RIGHT, TAILINGS PILES ARE AT CENTER WITH CYANIDE PLANT FOUNDATIONS TO THE LEFT OF THE PILES. PARKING LOT IS AT UPPER LEFT. THE AREA BETWEEN THE COLLAPSED TANK AT CENTER LEFT AND THE REMAINS OF THE MANAGER'S HOUSE AT LOWER RIGHT IS A TAILINGS HOLDING AREA. TAILINGS FROM THE MILL WERE HELD HERE. THE LARGE SETTLING TANKS WERE CHARGED FROM THIS HOLDING AREA BY A TRAM ON RAILS AND BY A SLUICEWAY SEEN AS THE DARK SPOT ON THE CENTER LEFT EDGE OF THE FRAME. AFTER THE TAILINGS WERE LEACHED, THEY WERE DEPOSITED ON THE LARGE WASTE PILE AT CENTER RIGHT. THE TANK AT CENTER RIGHT EDGE IS WHERE THE WATER PIPELINE ENTERED THE WORKS. A STRAIGHT LINE OF POSTS IN THE GROUND GO ACROSS THE CENTER FROM LEFT TO RIGHT, WHICH ORIGINALLY SUSPENDED THE WATER PIPELINE GOING FROM THE WATER HOLDING TANK AT RIGHT UP TO THE SECONDARY WATER TANKS ABOVE THE MILL. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  3. Reconstructing fish populations using Chaoborus (Diptera: Chaoboridae) remains a review

    NASA Astrophysics Data System (ADS)

    Sweetman, Jon N.; Smol, John P.

    2006-08-01

    Fish are an important component of many lakes, and a valuable resource in many countries, yet knowledge of how fish populations have fluctuated in the past is very limited. One potential source of information on fisheries dynamics is paleolimnology. This paper reviews the use of the sedimentary remains of the dipteran insect Chaoborus (commonly referred to as the phantom midge) in reconstructing past presence or absence of fish populations. We provide a brief overview of the ecology of Chaoborus larvae, and review the factors believed to be important in determining their distribution and abundance. In particular, we outline the important role fish have in structuring chaoborid assemblages. We highlight several recent studies utilizing Chaoborus remains in reconstructing past fish dynamics, including their use in determining the effects of acidification and piscicide additions on fish populations, and to tracing fish introductions into previously fishless lakes. We conclude by discussing the potential applications of other aquatic invertebrates, such as the Cladocera and Chironomidae, to infer changes in fish populations, and suggest that by integrating the information provided by these different proxies, we may further improve our ability to infer changes in past fish populations.

  4. Research potential and limitations of trace analyses of cremated remains.

    PubMed

    Harbeck, Michaela; Schleuder, Ramona; Schneider, Julius; Wiechmann, Ingrid; Schmahl, Wolfgang W; Grupe, Gisela

    2011-01-30

    Human cremation is a common funeral practice all over the world and will presumably become an even more popular choice for interment in the future. Mainly for purposes of identification, there is presently a growing need to perform trace analyses such as DNA or stable isotope analyses on human remains after cremation in order to clarify pending questions in civil or criminal court cases. The aim of this study was to experimentally test the potential and limitations of DNA and stable isotope analyses when conducted on cremated remains. For this purpose, tibiae from modern cattle were experimentally cremated by incinerating the bones in increments of 100°C until a maximum of 1000°C was reached. In addition, cremated human remains were collected from a modern crematory. The samples were investigated to determine level of DNA preservation and stable isotope values (C and N in collagen, C and O in the structural carbonate, and Sr in apatite). Furthermore, we assessed the integrity of microstructural organization, appearance under UV-light, collagen content, as well as the mineral and crystalline organization. This was conducted in order to provide a general background with which to explain observed changes in the trace analyses data sets. The goal is to develop an efficacious screening method for determining at which degree of burning bone still retains its original biological signals. We found that stable isotope analysis of the tested light elements in bone is only possible up to a heat exposure of 300°C while the isotopic signal from strontium remains unaltered even in bones exposed to very high temperatures. DNA-analyses seem theoretically possible up to a heat exposure of 600°C but can not be advised in every case because of the increased risk of contamination. While the macroscopic colour and UV-fluorescence of cremated bone give hints to temperature exposure of the bone's outer surface, its histological appearance can be used as a reliable indicator for the

  5. "Recent" macrofossil remains from the Lomonosov Ridge, central Arctic Ocean

    NASA Astrophysics Data System (ADS)

    Le Duc, Cynthia; de Vernal, Anne; Archambault, Philippe; Brice, Camille; Roberge, Philippe

    2016-04-01

    The examination of surface sediment samples collected from 17 sites along the Lomonosov Ridge at water depths ranging from 737 to 3339 meters during Polarstern Expedition PS87 in 2014 (Stein, 2015), indicates a rich biogenic content almost exclusively dominated by calcareous remains. Amongst biogenic remains, microfossils (planktic and benthic foraminifers, pteropods, ostracods, etc.) dominate but millimetric to centrimetric macrofossils occurred frequently at the surface of the sediment. The macrofossil remains consist of a large variety of taxa, including gastropods, bivalvia, polychaete tubes, scaphopods, echinoderm plates and spines, and fish otoliths. Among the Bivalvia, the most abundant taxa are Portlandia arctica, Hyalopecten frigidus, Cuspidaria glacilis, Policordia densicostata, Bathyarca spp., and Yoldiella spp. Whereas a few specimens are well preserved and apparently pristine, most mollusk shells displayed extensive alteration features. Moreover, most shells were covered by millimeter scale tubes of the serpulid polychaete Spirorbis sp. suggesting transport from low intertidal or subtidal zone. Both the ecological affinity and known geographic distribution of identified bivalvia as named above support the hypothesis of transportation rather than local development. In addition to mollusk shells, more than a hundred fish otoliths were recovered in surface sediments. The otoliths mostly belong to the Gadidae family. Most of them are well preserved and without serpulid tubes attached to their surface, suggesting a local/regional origin, unlike the shell remains. Although recovered at the surface, the macrofaunal assemblages of the Lomonosov Ridge do not necessarily represent the "modern" environments as they may result from reworking and because their occurrence at the surface of the sediment may also be due to winnowing of finer particles. Although the shells were not dated, we suspect that their actual ages may range from modern to several thousands of

  6. The work that remains at the intersection of gender and career development.

    PubMed

    Bickel, Janet

    2007-05-01

    Building on the study by Wagner et al, this commentary opens with a discussion of the persistence of gender disparities in career development and the challenge of interpreting those disparities. Given the multifaceted challenges facing rehabilitation medicine, facilitation of the career and leadership development of women physiatrists is critical. I suggest 3 areas of targeted action to facilitate the realization of women physiatrists' intellectual capital: (1) updated approaches to faculty and leadership development and mentoring, (2) more flexible faculty structures, and (3) chair support and accountability. Each member of the rehabilitation medicine community who cares about the future of the discipline is challenged to contribute to the dialogues that are necessary to carry these recommendations forward.

  7. Tax Administration: New Compliance Research Effort Is on Track, but Important Work Remains

    DTIC Science & Technology

    2002-06-01

    IRS’ Plans to Measure Tax Compliance Can Be Improved. GAO/GGD-93-52. (Washington, D.C.: April 5, 1993) Summarizes uses of Taxpayer Compliance...changes to measures of voluntary compliance. Tax Compliance : Status of the Tax Year 1994 Compliance Measurement Program. GAO/GGD-95-39. (Washington, D.C...Internal Revenue Service (IRS) needs to fix before implementing the project. Tax Compliance : 1994 Taxpayer Compliance Measurement Program. GAO/T-GGD-95-207

  8. Reidentification of Avian Embryonic Remains from the Cretaceous of Mongolia

    PubMed Central

    Varricchio, David J.; Balanoff, Amy M.; Norell, Mark A.

    2015-01-01

    Embryonic remains within a small (4.75 by 2.23 cm) egg from the Late Cretaceous, Mongolia are here re-described. High-resolution X-ray computed tomography (HRCT) was used to digitally prepare and describe the enclosed embryonic bones. The egg, IGM (Mongolian Institute for Geology, Ulaanbaatar) 100/2010, with a three-part shell microstructure, was originally assigned to Neoceratopsia implying extensive homoplasy among eggshell characters across Dinosauria. Re-examination finds the forelimb significantly longer than the hindlimbs, proportions suggesting an avian identification. Additional, postcranial apomorphies (strut-like coracoid, cranially located humeral condyles, olecranon fossa, slender radius relative to the ulna, trochanteric crest on the femur, and ulna longer than the humerus) identify the embryo as avian. Presence of a dorsal coracoid fossa and a craniocaudally compressed distal humerus with a strongly angled distal margin support a diagnosis of IGM 100/2010 as an enantiornithine. Re-identification eliminates the implied homoplasy of this tri-laminate eggshell structure, and instead associates enantiornithine birds with eggshell microstructure composed of a mammillary, squamatic, and external zones. Posture of the embryo follows that of other theropods with fore- and hindlimbs folded parallel to the vertebral column and the elbow pointing caudally just dorsal to the knees. The size of the egg and embryo of IGM 100/2010 is similar to the two other Mongolian enantiornithine eggs. Well-ossified skeletons, as in this specimen, characterize all known enantiornithine embryos suggesting precocial hatchlings, comparing closely to late stage embryos of modern precocial birds that are both flight- and run-capable upon hatching. Extensive ossification in enantiornithine embryos may contribute to their relatively abundant representation in the fossil record. Neoceratopsian eggs remain unrecognized in the fossil record. PMID:26030147

  9. Cognitive Achievement and Motivation in Hands-on and Teacher-Centred Science Classes: Does an additional hands-on consolidation phase (concept mapping) optimise cognitive learning at work stations?

    NASA Astrophysics Data System (ADS)

    Gerstner, Sabine; Bogner, Franz X.

    2010-05-01

    Our study monitored the cognitive and motivational effects within different educational instruction schemes: On the one hand, teacher-centred versus hands-on instruction; on the other hand, hands-on instruction with and without a knowledge consolidation phase (concept mapping). All the instructions dealt with the same content. For all participants, the hands-on approach as well as the concept mapping adaptation were totally new. Our hands-on approach followed instruction based on "learning at work stations". A total of 397 high-achieving fifth graders participated in our study. We used a pre-test, post-test, retention test design both to detect students' short-term learning success and long-term learning success, and to document their decrease rates of newly acquired knowledge. Additionally, we monitored intrinsic motivation. Although the teacher-centred approach provided higher short-term learning success, hands-on instruction resulted in relatively lower decrease rates. However, after six weeks, all students reached similar levels of newly acquired knowledge. Nevertheless, concept mapping as a knowledge consolidation phase positively affected short-term increase in knowledge. Regularly placed in instruction, it might increase long-term retention rates. Scores of interest, perceived competence and perceived choice were very high in all the instructional schemes.

  10. Restorative resins: hardness and strength vs. quantity of remaining double bonds.

    PubMed

    Asmussen, E

    1982-12-01

    It has been hypothesized that the Wallace indentation hardness of smooth surface resins is a factor of prime importance for the abrasion by food of Class 1 restorations. In the present work factors affecting the hardness of polymers were investigated. In addition the tensile strength of composite resins was measured and related to the catalytic system of the polymer. It was found that for a given composition of the monomer the Wallace hardness number increased with increasing content of inhibitor, decreased with increasing content of peroxide, and was unaffected by changes in the content of amine. The hardness was well correlated with the quantity of double bonds remaining in the polymer. BISGMA-based polymers showed no variation in hardness when the originating monomer varied with respect to content of a bi- or a trifunctional diluting monomer. Light-polymerized polymers were relatively hard as compared to chemically cured materials of adequate setting time. The tensile strength of composite resins was predominantly determined by the monomer content of peroxide and increased herewith. The tensile strength was well correlated with the quantity of remaining double bonds in the constituting polymer.

  11. Toenails as an alternative source material for the extraction of DNA from decomposed human remains.

    PubMed

    Schlenker, Andrew; Grimble, Katelyn; Azim, Arani; Owen, Rebecca; Hartman, Dadna

    2016-01-01

    The DNA identification of decomposed human remains for coronial investigations at the Victorian Institute of Forensic Medicine routinely requires the retrieval and processing of a bone sample obtained from the deceased. Bone is a difficult sample type to work with as it requires surgical removal from the deceased, refrigerated storage, and additional processing steps prior to DNA analysis in comparison to other samples types such as buccal swabs or blood stains. In an attempt to overcome the issues posed by bone, a DNA extraction method utilising toenails as an alternate source material was optimised and trialled. Two DNA extraction methods were optimised for digestion of toenail material, with the method utilising the QIAGEN DNA Investigator Kit selected for a casework trial. Single source DNA profiles, matching those of the conventional samples taken, were obtained for toenail samples collected from 28 of 30 coronial cases available for this study. Of these, 26 toenail samples produced full profiles. Although the overall DNA profile quality from the toenails was less than that of the conventional sample, the profiles from toenails met the reporting requirements for identification. Based on the results obtained, the Victorian Institute of Forensic Medicine will be implementing toenails as the primary sample type for collection from decomposed remains when blood is not a suitable sample type.

  12. 7 CFR 160.29 - Containers to remain intact.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Containers to remain intact. 160.29 Section 160.29... STANDARDS FOR NAVAL STORES Analysis, Inspection, and Grading on Request § 160.29 Containers to remain intact... the containers holding such naval stores remain intact as sampled until the analysis,...

  13. ABO blood typing of human skeletal remains in Hungary.

    PubMed

    Lengyel, I

    1984-03-01

    The author reports about the theoretical effects of his paleoserologic investigations on some historical population genetics problems. First he refers to the essence of the two modifications by the help of which the fluorescent antibody method can be made suitable for blood typing or archeological skeletal remains and determines his working units (sample, series, "population") used in the paleoserologic researches. The benefits of the projection of the ABO blood typing results on the map of the cemetaries are demonstrated. The distribution of the several phenotypes are collated to the character or richness of the grave goods and to the taxonomic features of the late individuals. The thorough examination of the serogenetic distances among the several samples of a given historical period may cast more light on the ethnic interrelations of the earlier populations living in the same geographic area. Following up the serogenetic changes of a population during subsequent historical periods, new ideas can be gained about the importance of the environmental, economic, and demographic factors shaping the serogenetic profile of the population.

  14. Late Pleistocene mammoth remains from Coastal Maine, USA

    NASA Astrophysics Data System (ADS)

    Hoyle, B. Gary; Fisher, Daniel C.; Borns, Harold W.; Churchill-Dickson, Lisa L.; Dorion, Christopher C.; Weddle, Thomas K.

    2004-05-01

    Remains identified as those of a woolly mammoth ( Mammuthus primigenius) dated at 12,200 ± 55 14C yr B.P. were recovered while excavating in a complex sequence of glaciomarine sediments in Scarborough, Maine, USA. The mammoth was found in the top meter of a fossiliferous unit of mud and sand laminites. These sediments were deposited during a marine regressive phase following the transgression that accompanied northward retreat of the margin of the Laurentide ice sheet. A Portlandia arctica valve from the underlying transgressive unit provides a minimum age of 14,820 ± 105 14C yr B.P. for local deglaciation. The mammoth, an adult female, died in midwinter with no evidence of human involvement. Tusk growth rates and oxygen-isotope variation over the last few years of life record low seasonality. The mammoth was transported to the site as a partial carcass by the late-glacial proto-Saco River. It sank in a near-shore setting, was subjected to additional disarticulation and scattering of elements, and was finally buried in sediments reworked by the shallowing sea.

  15. Late Pleistocene mammoth remains from Coastal Maine, USA

    USGS Publications Warehouse

    Hoyle, B.G.; Fisher, D.C.; Borns, H.W.; Churchill-Dickson, L. L.; Dorion, C.C.; Weddle, T.K.

    2004-01-01

    Remains identified as those of a woolly mammoth ( Mammuthus primigenius ) dated at 12,200 ?? 55 14C yr B.P. were recovered while excavating in a complex sequence of glaciomarine sediments in Scarborough, Maine, USA. The mammoth was found in the top meter of a fossiliferous unit of mud and sand laminites. These sediments were deposited during a marine regressive phase following the transgression that accompanied northward retreat of the margin of the Laurentide ice sheet. A Portlandia arctica valve from the underlying transgressive unit provides a minimum age of 14,820 ?? 105 14C yr B.P. for local deglaciation. The mammoth, an adult female, died in midwinter with no evidence of human involvement. Tusk growth rates and oxygen-isotope variation over the last few years of life record low seasonality. The mammoth was transported to the site as a partial carcass by the late-glacial proto-Saco River. It sank in a near-shore setting, was subjected to additional disarticulation and scattering of elements, and was finally buried in sediments reworked by the shallowing sea. ?? 2004 University of Washington. All rights reserved.

  16. Remaining Useful Life Estimation in Prognosis: An Uncertainty Propagation Problem

    NASA Technical Reports Server (NTRS)

    Sankararaman, Shankar; Goebel, Kai

    2013-01-01

    The estimation of remaining useful life is significant in the context of prognostics and health monitoring, and the prediction of remaining useful life is essential for online operations and decision-making. However, it is challenging to accurately predict the remaining useful life in practical aerospace applications due to the presence of various uncertainties that affect prognostic calculations, and in turn, render the remaining useful life prediction uncertain. It is challenging to identify and characterize the various sources of uncertainty in prognosis, understand how each of these sources of uncertainty affect the uncertainty in the remaining useful life prediction, and thereby compute the overall uncertainty in the remaining useful life prediction. In order to achieve these goals, this paper proposes that the task of estimating the remaining useful life must be approached as an uncertainty propagation problem. In this context, uncertainty propagation methods which are available in the literature are reviewed, and their applicability to prognostics and health monitoring are discussed.

  17. Group Sparse Additive Models

    PubMed Central

    Yin, Junming; Chen, Xi; Xing, Eric P.

    2016-01-01

    We consider the problem of sparse variable selection in nonparametric additive models, with the prior knowledge of the structure among the covariates to encourage those variables within a group to be selected jointly. Previous works either study the group sparsity in the parametric setting (e.g., group lasso), or address the problem in the nonparametric setting without exploiting the structural information (e.g., sparse additive models). In this paper, we present a new method, called group sparse additive models (GroupSpAM), which can handle group sparsity in additive models. We generalize the ℓ1/ℓ2 norm to Hilbert spaces as the sparsity-inducing penalty in GroupSpAM. Moreover, we derive a novel thresholding condition for identifying the functional sparsity at the group level, and propose an efficient block coordinate descent algorithm for constructing the estimate. We demonstrate by simulation that GroupSpAM substantially outperforms the competing methods in terms of support recovery and prediction accuracy in additive models, and also conduct a comparative experiment on a real breast cancer dataset.

  18. The value of radiocarbon analysis in determining the forensic interest of human skeletal remains found in unusual circumstances.

    PubMed

    Cardoso, Hugo F V; Puentes, Katerina; Soares, António Monge; Santos, Agostinho; Magalhães, Teresa

    2012-02-01

    The case under analysis refers to the remains of a young adult female found in a shallow grave during the construction work of a hospital in Northern Portugal. The forensic interest of the finding could not be ruled out since distinguishing features pointing to an archaeological grave were lacking. For example, absence of archaeological artefacts could not establish its forensic significance with certainty, together with the absence of modern objects, such as remnants of clothing or personal objects. In addition, although the remains were badly preserved, the condition may not have resulted from a long post-depositional period, but instead could be explained by the geology of the site and the presence of plant roots. The radiocarbon analysis of the remains was meant to establish the death of the individual to before or after the mid-1950s, from comparison with bomb-curve content values. A value of 0.9789 ± 0.0044 for F(14)C (pmC = 97.19 ± 0.44% Modern or Δ(14)C = -28.1 ± 4.4‰) was obtained, which placed the death of the individual in the pre-mod-1950s period. This report illustrates the use of radiocarbon analysis in establishing whether the human remains are contemporary or not and describes evidence for what appears to be an historic clandestine grave.

  19. Genetic transformation of fruit trees: current status and remaining challenges.

    PubMed

    Gambino, Giorgio; Gribaudo, Ivana

    2012-12-01

    Genetic transformation has emerged as a powerful tool for genetic improvement of fruit trees hindered by their reproductive biology and their high levels of heterozygosity. For years, genetic engineering of fruit trees has focussed principally on enhancing disease resistance (against viruses, fungi, and bacteria), although there are few examples of field cultivation and commercial application of these transgenic plants. In addition, over the years much work has been performed to enhance abiotic stress tolerance, to induce modifications of plant growth and habit, to produce marker-free transgenic plants and to improve fruit quality by modification of genes that are crucially important in the production of specific plant components. Recently, with the release of several genome sequences, studies of functional genomics are becoming increasingly important: by modification (overexpression or silencing) of genes involved in the production of specific plant components is possible to uncover regulatory mechanisms associated with the biosynthesis and catabolism of metabolites in plants. This review focuses on the main advances, in recent years, in genetic transformation of the most important species of fruit trees, devoting particular attention to functional genomics approaches and possible future challenges of genetic engineering for these species in the post-genomic era.

  20. Addition of Work Rate and Temperature Information to the Augmented NMRI Standard (ANS) Data Files in the NMR198 Subset of the USN N2-O2 Primary Data Set

    DTIC Science & Technology

    2011-01-01

    he said he suddenly became dizzy and also noticed slight deep pain in Rt groin . He lay down and fell asleep. No complaints this AM. Pt Noticed...dive he noticed pain in his right elbow in region of biceps tendon insertion. Remained for about half hour without relief and he was recompressed at... pain in his left elbow. On surfacing the pain traveled up his arm and ended at the left shoulder at insertion of deltoid, disappearing from his elbow

  1. Does It Pay to Move from Welfare to Work?

    ERIC Educational Resources Information Center

    Danziger, Sheldon; Heflin, Colleen M.; Corcoran, Mary E.; Oltmans, Elizabeth; Wang, Hui-Chen

    2002-01-01

    The 1996 Personal Responsibility and Work Opportunity Reconciliation Act requires welfare recipients to look for work and has made it more difficult for nonworking recipients to remain on the welfare rolls. In addition, the economic boom of the 1990s and changes in federal and state policies have raised the net income gain associated with moving…

  2. Sky-view factor visualization for detection of archaeological remains

    NASA Astrophysics Data System (ADS)

    Kokalj, Žiga; Oštir, Krištof; Zakšek, Klemen

    2013-04-01

    Many archaeological remains are covered by sand or vegetation but it still possible to detect them by remote sensing techniques. One of them is airborne laser scanning that enables production of digital elevation models (DEM) of very high resolution (better than 1 m) with high relative elevation accuracy (centimetre level), even under forest. Thus, it has become well established in archaeological applications. However, effective interpretation of digital elevation models requires appropriate data visualization. Analytical relief shading is used in most cases. Although widely accepted, this method has two major drawbacks: identifying details in deep shades and inability to properly represent linear features lying parallel to the light beam. Several authors have tried to overcome these limitations by changing the position of the light source or by filtering. This contribution addresses the DEM visualization problem by sky-view factor, a visualization technique based on diffuse light that overcomes the directional problems of hill-shading. Sky-view factor is a parameter that describes the portion of visible sky limited by relief. It can be used as a general relief visualization technique to show relief characteristics. In particular, we show that this visualization is a very useful tool in archaeology. Applying the sky-view factor for visualization purposes gives advantages over other techniques because it reveals small (or large, depending on the scale of the observed phenomenon and consequential algorithm settings) relief features while preserving the perception of general topography. In the case study (DEM visualization of a fortified enclosure of Tonovcov grad in Slovenia) we show that for the archaeological purposes the sky-view factor is the optimal DEM visualization method. Its ability to consider the neighborhood context makes it an outstanding tool when compared to other visualization techniques. One can choose a large search radius and the most important

  3. The taphonomy of human remains in a glacial environment.

    PubMed

    Pilloud, Marin A; Megyesi, Mary S; Truffer, Martin; Congram, Derek

    2016-04-01

    A glacial environment is a unique setting that can alter human remains in characteristic ways. This study describes glacial dynamics and how glaciers can be understood as taphonomic agents. Using a case study of human remains recovered from Colony Glacier, Alaska, a glacial taphonomic signature is outlined that includes: (1) movement of remains, (2) dispersal of remains, (3) altered bone margins, (4) splitting of skeletal elements, and (5) extensive soft tissue preservation and adipocere formation. As global glacier area is declining in the current climate, there is the potential for more materials of archaeological and medicolegal significance to be exposed. It is therefore important for the forensic anthropologist to have an idea of the taphonomy in this setting and to be able to differentiate glacial effects from other taphonomic agents.

  4. 13. View South, showing the remaining pier footings for the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. View South, showing the remaining pier footings for the steam engine water tower for the Chesapeake and Ohio Railroad. - Cotton Hill Station Bridge, Spanning New River at State Route 16, Cotton Hill, Fayette County, WV

  5. 53. INTERIOR VIEW LOOKING NORTH NORTHEAST SHOWING THE REMAINS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    53. INTERIOR VIEW LOOKING NORTH NORTHEAST SHOWING THE REMAINS OF A WOODEN SETTLING BOX IN THE BACKGROUND RIGHT. AMALGAMATING PANS IN THE FOREGROUND. - Standard Gold Mill, East of Bodie Creek, Northeast of Bodie, Bodie, Mono County, CA

  6. View of submerged remains of Read Sawmill, showing floor boards, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of submerged remains of Read Sawmill, showing floor boards, cross beams and notches for wall post beams. - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  7. View of submerged remains of Read Sawmill, showing floor boards, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of submerged remains of Read Sawmill, showing floor boards, wall boards, tenoned uprights and mortised sill beams. - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  8. View of submerged remains of Read Sawmill, with floor boards ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of submerged remains of Read Sawmill, with floor boards removed, showing cross beams, foundation sill and mortises, and horizontal wall boards. - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  9. View of submerged remains of Read Sawmill with most floorboards ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of submerged remains of Read Sawmill with most floorboards removed, showing cross beams with mortises, vertical wall boards, and horizontal floor boards. - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  10. [The craniofacial identification of the remains from the Yekaterinburg burial].

    PubMed

    Abramov, S S

    1998-01-01

    Based on expert evaluation of remains of 7 members of Imperial Romanov family and 4 persons in their attendance, the author demonstrates methodological approaches to identification craniocephalic studies in cases with group burials.

  11. 4. Band Wheel and Walking Beam Mechanism, Including Remains of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Band Wheel and Walking Beam Mechanism, Including Remains of Frame Belt House, Looking Southeast - David Renfrew Oil Rig, East side of Connoquenessing Creek, 0.4 mile North of confluence with Thorn Creek, Renfrew, Butler County, PA

  12. 7. REMAINS OF PLANK WALL WITHIN CANAL CONSTRUCTED TO PROTECT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. REMAINS OF PLANK WALL WITHIN CANAL CONSTRUCTED TO PROTECT OUTSIDE CANAL BANK, LOOKING SOUTHWEST. NOTE CROSS SUPPORT POLES EXTENDING TO HILLSIDE. - Snake River Ditch, Headgate on north bank of Snake River, Dillon, Summit County, CO

  13. 6. REMAINS OF PLANK WALL NAILED TO POSTS WITHIN CANAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. REMAINS OF PLANK WALL NAILED TO POSTS WITHIN CANAL CONSTRUCTED TO PROTECT OUTSIDE CANAL BANK. VIEW IS TO THE WEST. - Snake River Ditch, Headgate on north bank of Snake River, Dillon, Summit County, CO

  14. 21. REMAINS OF HOP BAILING CHUTE ON SECOND FLOOR; THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. REMAINS OF HOP BAILING CHUTE ON SECOND FLOOR; THIS CHUTE EXTENDS TO THE GROUND FLOOR. - James W. Seavey Hop Driers, 0.6 mile East from junction of Highway 99 & Alexander Avenue, Corvallis, Benton County, OR

  15. 20. REMAINS OF HOP BAILING CHUTE ON GROUND FLOOR; THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. REMAINS OF HOP BAILING CHUTE ON GROUND FLOOR; THIS CHUTE EXTENDS TO THE SECOND FLOOR. - James W. Seavey Hop Driers, 0.6 mile East from junction of Highway 99 & Alexander Avenue, Corvallis, Benton County, OR

  16. 21. Detail of remains of machinery house viewed from below ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Detail of remains of machinery house viewed from below anchor-span deck, showing drawspan cable running back to the winding drum of the winch; view to northeast. - Summer Street Bridge, Spanning Reserved Channel, Boston, Suffolk County, MA

  17. Attempted Suicide Rates in U.S. Remain Unchanged

    MedlinePlus

    ... U.S. Remain Unchanged Men more often resorted to violent means, while women turned to poisoning, drowning, study ... likely to attempt suicide, but males used more violent methods. And all attempts were most common in ...

  18. 11. LOOKING SOUTH AT THE ONLY REMAINING PART OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. LOOKING SOUTH AT THE ONLY REMAINING PART OF THE NORTH SIDE OF ORIGINAL LAB, FROM COURTYARD. - U.S. Geological Survey, Rock Magnetics Laboratory, 345 Middlefield Road, Menlo Park, San Mateo County, CA

  19. 11. Remains of Douglasfir cordwood abandoned when kilns ceased operation, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Remains of Douglas-fir cordwood abandoned when kilns ceased operation, looking northeast. - Warren King Charcoal Kilns, 5 miles west of Idaho Highway 28, Targhee National Forest, Leadore, Lemhi County, ID

  20. 25. CAFETERIA Note remains of tile floor in foreground. Food ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. CAFETERIA Note remains of tile floor in foreground. Food cooked on the stove was served to workers in the eating area to the left of the counter (off picture). - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  1. 3. INTERIOR OF THE WATER FILTRATION PLANT SHOWING REMAINS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. INTERIOR OF THE WATER FILTRATION PLANT SHOWING REMAINS OF THE FILTRATION APPARATUS. - Tower Hill No. 2 Mine, Approximately 0.47 mile Southwest of intersection of Stone Church Road & Township Route 561, Hibbs, Fayette County, PA

  2. 1. VIEW SHOWING REMAINS OF CAMOUFLAGE COVERING CONCRETE FOOTING FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW SHOWING REMAINS OF CAMOUFLAGE COVERING CONCRETE FOOTING FOR A GENERATOR PAD - Fort Cronkhite, Anti-Aircraft Battery No. 1, Concrete Footing-Generator Pad, Wolf Road, Sausalito, Marin County, CA

  3. 15. DETAIL VIEW, AT STREET LEVEL, OF REMAINING STONE POST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. DETAIL VIEW, AT STREET LEVEL, OF REMAINING STONE POST ON NORTH SIDE, STONE WALL AND METAL RAILING ON SOUTH SIDE, LOOKING SOUTHEAST - Lake Street Bridge, Spanning Ruddiman Creek at Lake Shore Drive, Muskegon, Muskegon County, MI

  4. The Slopes Remain the Same: Reply to Wolfe (2016)

    PubMed Central

    2016-01-01

    Wolfe (2016) responds to my article (Kristjánsson, 2015), arguing among other things, that the differences in slope by response method in my data reflect speed accuracy trade-offs. But when reaction times and errors are combined in one score (inverse efficiency) to sidestep speed accuracy trade-offs, slope differences still remain. The problem that slopes, which are thought to measure search speed, differ by response type therefore remains. PMID:27872743

  5. 52. VIEW OF REMAINS OF ORIGINAL 1907 CONTROL PANEL, LOCATED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    52. VIEW OF REMAINS OF ORIGINAL 1907 CONTROL PANEL, LOCATED ON NORTH WALL OF EAST END OF CONTROL ROOM. PORTIONS OF THIS PANEL REMAINED IN USE UNTIL THE PLANT CLOSED. THE METERS AND CONTROLS ARE MOUNTED ON SOAPSTONE PANELS. THE INSTRUMENT IN THE LEFT CENTER OF THE PHOTOGRAPH IS A TIRRILL VOLTAGE REGULATOR. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

  6. A non-destructive method for dating human remains

    USGS Publications Warehouse

    Lail, Warren K.; Sammeth, David; Mahan, Shannon; Nevins, Jason

    2013-01-01

    The skeletal remains of several Native Americans were recovered in an eroded state from a creek bank in northeastern New Mexico. Subsequently stored in a nearby museum, the remains became lost for almost 36 years. In a recent effort to repatriate the remains, it was necessary to fit them into a cultural chronology in order to determine the appropriate tribe(s) for consultation pursuant to the Native American Grave Protection and Repatriation Act (NAGPRA). Because the remains were found in an eroded context with no artifacts or funerary objects, their age was unknown. Having been asked to avoid destructive dating methods such as radiocarbon dating, the authors used Optically Stimulated Luminescence (OSL) to date the sediments embedded in the cranium. The OSL analyses yielded reliable dates between A.D. 1415 and A.D. 1495. Accordingly, we conclude that the remains were interred somewhat earlier than A.D. 1415, but no later than A.D. 1495. We believe the remains are from individuals ancestral to the Ute Mouache Band, which is now being contacted for repatriation efforts. Not only do our methods contribute to the immediate repatriation efforts, they provide archaeologists with a versatile, non-destructive, numerical dating method that can be used in many burial contexts.

  7. Re-engineering NASA's space communications to remain viable in a constrained fiscal environment

    NASA Astrophysics Data System (ADS)

    Hornstein, Rhoda Shaller; Hei, Donald J., Jr.; Kelly, Angelita C.; Lightfoot, Patricia C.; Bell, Holland T.; Cureton-Snead, Izeller E.; Hurd, William J.; Scales, Charles H.

    1994-11-01

    Along with the Red and Blue Teams commissioned by the NASA Administrator in 1992, NASA's Associate Administrator for Space Communications commissioned a Blue Team to review the Office of Space Communications (Code O) Core Program and determine how the program could be conducted faster, better, and cheaper. Since there was no corresponding Red Team for the Code O Blue Team, the Blue Team assumed a Red Team independent attitude and challenged the status quo, including current work processes, functional distinctions, interfaces, and information flow, as well as traditional management and system development practices. The Blue Team's unconstrained, non-parochial, and imaginative look at NASA's space communications program produced a simplified representation of the space communications infrastructure that transcends organizational and functional boundaries, in addition to existing systems and facilities. Further, the Blue Team adapted the 'faster, better, cheaper' charter to be relevant to the multi-mission, continuous nature of the space communications program and to serve as a gauge for improving customer services concurrent with achieving more efficient operations and infrastructure life cycle economies. This simplified representation, together with the adapted metrics, offers a future view and process model for reengineering NASA's space communications to remain viable in a constrained fiscal environment. Code O remains firm in its commitment to improve productivity, effectiveness, and efficiency. In October 1992, the Associate Administrator reconstituted the Blue Team as the Code O Success Team (COST) to serve as a catalyst for change. In this paper, the COST presents the chronicle and significance of the simplified representation and adapted metrics, and their application during the FY 1993-1994 activities.

  8. Re-engineering NASA's space communications to remain viable in a constrained fiscal environment

    NASA Technical Reports Server (NTRS)

    Hornstein, Rhoda Shaller; Hei, Donald J., Jr.; Kelly, Angelita C.; Lightfoot, Patricia C.; Bell, Holland T.; Cureton-Snead, Izeller E.; Hurd, William J.; Scales, Charles H.

    1994-01-01

    Along with the Red and Blue Teams commissioned by the NASA Administrator in 1992, NASA's Associate Administrator for Space Communications commissioned a Blue Team to review the Office of Space Communications (Code O) Core Program and determine how the program could be conducted faster, better, and cheaper. Since there was no corresponding Red Team for the Code O Blue Team, the Blue Team assumed a Red Team independent attitude and challenged the status quo, including current work processes, functional distinctions, interfaces, and information flow, as well as traditional management and system development practices. The Blue Team's unconstrained, non-parochial, and imaginative look at NASA's space communications program produced a simplified representation of the space communications infrastructure that transcends organizational and functional boundaries, in addition to existing systems and facilities. Further, the Blue Team adapted the 'faster, better, cheaper' charter to be relevant to the multi-mission, continuous nature of the space communications program and to serve as a gauge for improving customer services concurrent with achieving more efficient operations and infrastructure life cycle economies. This simplified representation, together with the adapted metrics, offers a future view and process model for reengineering NASA's space communications to remain viable in a constrained fiscal environment. Code O remains firm in its commitment to improve productivity, effectiveness, and efficiency. In October 1992, the Associate Administrator reconstituted the Blue Team as the Code O Success Team (COST) to serve as a catalyst for change. In this paper, the COST presents the chronicle and significance of the simplified representation and adapted metrics, and their application during the FY 1993-1994 activities.

  9. Study of electrochemically active carbon, Ga2O3 and Bi2O3 as negative additives for valve-regulated lead-acid batteries working under high-rate, partial-state-of-charge conditions

    NASA Astrophysics Data System (ADS)

    Zhao, Li; Chen, Baishuang; Wu, Jinzhu; Wang, Dianlong

    2014-02-01

    Electrochemically active carbon (EAC), Gallium (III) oxide (Ga2O3) and Bismuth (III) oxide (Bi2O3) are used as the negative additives of valve-regulated lead-acid (VRLA) batteries to prolong the cycle life of VRLA batteries under high-rate partial-state-of-charge (HRPSoC) conditions, and their effects on the cycle life of VRLA batteries are investigated. It is found that the addition of EAC in negative active material can restrain the sulfation of the negative plates and prolong the cycle performance of VRLA batteries under HRPSoC conditions. It is also observed that the addition of Ga2O3 or Bi2O3 in EAC can effectively increase the overpotential of hydrogen evolution on EAC electrodes, and decrease the evolution rate of hydrogen. An appropriate addition amount of Ga2O3 or Bi2O3 in the negative plates of VRLA batteries can decrease the cut-off charging voltage, increase the cut-off discharging voltage, and prolong the cycle life of VRLA batteries under HRPSoC conditions. The battery added with 0.5% EAC and 0.01% Ga2O3 in negative active material shows a lowest cut-off charging voltage and a highest cut-off discharging voltage under HRPSoC conditions, and its' cycle life reaches about 8100 cycles which is at least three times longer than that without Ga2O3.

  10. Identification of the remains of King Richard III.

    PubMed

    King, Turi E; Fortes, Gloria Gonzalez; Balaresque, Patricia; Thomas, Mark G; Balding, David; Maisano Delser, Pierpaolo; Neumann, Rita; Parson, Walther; Knapp, Michael; Walsh, Susan; Tonasso, Laure; Holt, John; Kayser, Manfred; Appleby, Jo; Forster, Peter; Ekserdjian, David; Hofreiter, Michael; Schürer, Kevin

    2014-12-02

    In 2012, a skeleton was excavated at the presumed site of the Grey Friars friary in Leicester, the last-known resting place of King Richard III. Archaeological, osteological and radiocarbon dating data were consistent with these being his remains. Here we report DNA analyses of both the skeletal remains and living relatives of Richard III. We find a perfect mitochondrial DNA match between the sequence obtained from the remains and one living relative, and a single-base substitution when compared with a second relative. Y-chromosome haplotypes from male-line relatives and the remains do not match, which could be attributed to a false-paternity event occurring in any of the intervening generations. DNA-predicted hair and eye colour are consistent with Richard's appearance in an early portrait. We calculate likelihood ratios for the non-genetic and genetic data separately, and combined, and conclude that the evidence for the remains being those of Richard III is overwhelming.

  11. Identification of the remains of King Richard III

    PubMed Central

    King, Turi E.; Fortes, Gloria Gonzalez; Balaresque, Patricia; Thomas, Mark G.; Balding, David; Delser, Pierpaolo Maisano; Neumann, Rita; Parson, Walther; Knapp, Michael; Walsh, Susan; Tonasso, Laure; Holt, John; Kayser, Manfred; Appleby, Jo; Forster, Peter; Ekserdjian, David; Hofreiter, Michael; Schürer, Kevin

    2014-01-01

    In 2012, a skeleton was excavated at the presumed site of the Grey Friars friary in Leicester, the last-known resting place of King Richard III. Archaeological, osteological and radiocarbon dating data were consistent with these being his remains. Here we report DNA analyses of both the skeletal remains and living relatives of Richard III. We find a perfect mitochondrial DNA match between the sequence obtained from the remains and one living relative, and a single-base substitution when compared with a second relative. Y-chromosome haplotypes from male-line relatives and the remains do not match, which could be attributed to a false-paternity event occurring in any of the intervening generations. DNA-predicted hair and eye colour are consistent with Richard’s appearance in an early portrait. We calculate likelihood ratios for the non-genetic and genetic data separately, and combined, and conclude that the evidence for the remains being those of Richard III is overwhelming. PMID:25463651

  12. Forensic considerations when dealing with incinerated human dental remains.

    PubMed

    Reesu, Gowri Vijay; Augustine, Jeyaseelan; Urs, Aadithya B

    2015-01-01

    Establishing the human dental identification process relies upon sufficient post-mortem data being recovered to allow for a meaningful comparison with ante-mortem records of the deceased person. Teeth are the most indestructible components of the human body and are structurally unique in their composition. They possess the highest resistance to most environmental effects like fire, desiccation, decomposition and prolonged immersion. In most natural as well as man-made disasters, teeth may provide the only means of positive identification of an otherwise unrecognizable body. It is imperative that dental evidence should not be destroyed through erroneous handling until appropriate radiographs, photographs, or impressions can be fabricated. Proper methods of physical stabilization of incinerated human dental remains should be followed. The maintenance of integrity of extremely fragile structures is crucial to the successful confirmation of identity. In such situations, the forensic dentist must stabilise these teeth before the fragile remains are transported to the mortuary to ensure preservation of possibly vital identification evidence. Thus, while dealing with any incinerated dental remains, a systematic approach must be followed through each stage of evaluation of incinerated dental remains to prevent the loss of potential dental evidence. This paper presents a composite review of various studies on incinerated human dental remains and discusses their impact on the process of human identification and suggests a step by step approach.

  13. Microscopic residues of bone from dissolving human remains in acids.

    PubMed

    Vermeij, Erwin; Zoon, Peter; van Wijk, Mayonne; Gerretsen, Reza

    2015-05-01

    Dissolving bodies is a current method of disposing of human remains and has been practiced throughout the years. During the last decade in the Netherlands, two cases have emerged in which human remains were treated with acid. In the first case, the remains of a cremated body were treated with hydrofluoric acid. In the second case, two complete bodies were dissolved in a mixture of hydrochloric and sulfuric acid. In both cases, a great variety of evidence was collected at the scene of crime, part of which was embedded in resin, polished, and investigated using SEM/EDX. Apart from macroscopic findings like residual bone and artificial teeth, in both cases, distinct microscopic residues of bone were found as follows: (partly) digested bone, thin-walled structures, and recrystallized calcium phosphate. Although some may believe it is possible to dissolve a body in acid completely, at least some of these microscopic residues will always be found.

  14. Osteometric sex determination of burned human skeletal remains.

    PubMed

    Gonçalves, D; Thompson, T J U; Cunha, E

    2013-10-01

    Sex determination of human burned skeletal remains is extremely hard to achieve because of heat-related fragmentation, warping and dimensional changes. In particular, the latter is impeditive of osteometric analyses that are based on references developed on unburned bones. New osteometric references were thus obtained which allow for more reliable sex determinations. The calcined remains of cremated Portuguese individuals were examined and specific standard measurements of the humerus, femur, talus and calcaneus were recorded. This allowed for the compilation of new sex discriminating osteometric references which were then tested on independent samples with good results. Both the use of simple section points and of logistic regression equations provided successful sex classification scores. These references may now be used for the sex determination of burned skeletons. Its reliability is highest for contemporary Portuguese remains but nonetheless these results have important repercussion for forensic research. More conservative use of these references may also prove valuable for other populations as well as for archaeological research.

  15. Classification of pelvic ring fractures in skeletonized human remains.

    PubMed

    Báez-Molgado, Socorro; Bartelink, Eric J; Jellema, Lyman M; Spurlock, Linda; Sholts, Sabrina B

    2015-01-01

    Pelvic ring fractures are associated with high rates of mortality and thus can provide key information about circumstances surrounding death. These injuries can be particularly informative in skeletonized remains, yet difficult to diagnose and interpret. This study adapted a clinical system of classifying pelvic ring fractures according to their resultant degree of pelvic stability for application to gross human skeletal remains. The modified Tile criteria were applied to the skeletal remains of 22 individuals from the Cleveland Museum of Natural History and Universidad Nacional Autónoma de México that displayed evidence of pelvic injury. Because these categories are tied directly to clinical assessments concerning the severity and treatment of injuries, this approach can aid in the identification of manner and cause of death, as well as interpretations of possible mechanisms of injury, such as those typical in car-to-pedestrian and motor vehicle accidents.

  16. Decay rates of human remains in an arid environment.

    PubMed

    Galloway, A; Birkby, W H; Jones, A M; Henry, T E; Parks, B O

    1989-05-01

    The environment of southern Arizona with mild winters and hot, dry summers produces great variability in decay rates of human remains. Summer temperatures, which range well over 38 degrees C (100 degrees F), induce rapid bloating as a result of the accumulation of decompositional gases. However, in certain circumstances, the aridity can lead to extensive mummification, allowing preservation of remains for hundreds of years. A retrospective study of 189 cases, concentrating on remains found on the desert floor or in the surrounding mountains and on remains found within closed structures, outlines the time frame and sequences of the decay process. Remains can retain a fresh appearance for a considerable time in the winter, but the onset of marked decomposition is rapid in the summer months. Bloating of the body usually is present two to seven days following death. Following this, within structures, there is frequently rapid decomposition and skeletonization. With outdoor exposure, remains are more likely to pass through a long period of dehydration of outer tissues, mummification, and reduction of desiccated tissue. Exposure of large portions of the skeleton usually does not occur until four to six months after death. Bleaching and exfoliation of bone--the beginning stages of destruction of the skeletal elements--begins at about nine months' exposure. Insect activity, including that of maggot and beetle varieties, may accelerate decomposition, but this process is greatly affected by location of the body, seasonal weather, and accessibility of the soft tissues. Carnivores and other scavengers also are contributing factors, as are clothing or covering of the body, substrate, elevation, and latitude.

  17. Intolerance of uncertainty in emotional disorders: What uncertainties remain?

    PubMed

    Shihata, Sarah; McEvoy, Peter M; Mullan, Barbara Ann; Carleton, R Nicholas

    2016-06-01

    The current paper presents a future research agenda for intolerance of uncertainty (IU), which is a transdiagnostic risk and maintaining factor for emotional disorders. In light of the accumulating interest and promising research on IU, it is timely to emphasize the theoretical and therapeutic significance of IU, as well as to highlight what remains unknown about IU across areas such as development, assessment, behavior, threat and risk, and relationships to cognitive vulnerability factors and emotional disorders. The present paper was designed to provide a synthesis of what is known and unknown about IU, and, in doing so, proposes broad and novel directions for future research to address the remaining uncertainties in the literature.

  18. OVERVIEW OF REMAINS OF DEWATERING BUILDING, LOOKING SOUTH TOWARD CYANIDE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OVERVIEW OF REMAINS OF DEWATERING BUILDING, LOOKING SOUTH TOWARD CYANIDE PROCESSING AREA. WATER USED IN PROCESSING AT THE STAMP MILL WAS CIRCULATED HERE FOR RECLAMATION. SANDS WERE SETTLED OUT AND DEPOSITED IN ONE OF TWO TAILINGS HOLDING AREAS. CLEARED WATER WAS PUMPED BACK TO THE MILL FOR REUSE. THIS PROCESS WAS ACCOMPLISHED BY THE USE OF SETTLING CONES, EIGHT FEET IN DIAMETER AND SIX FEET HIGH. THE REMAINS OF FOUR CONES ARE AT CENTER, BEHIND THE TANK IN THE FOREGROUND. TO THE LEFT IS THE MAIN ACCESS ROAD BETWEEN THE MILL AND THE PARKING LOT. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  19. Defense Modeling and Simulation Office Data and Repositories Technology Working Group (DRTWG) Meetings Held February 7-10, 1995 and Additional Task Force and Subgroup Meetings Held Between July 1994 and February 1995.

    DTIC Science & Technology

    1995-01-01

    develop IEEE (ANSI-level) standards for IDEFIX (syntax and semantics and the user guide) and evolve the language and practice standards in parallel with...the needs of the users. Currently, the WG is working on (1) completing the annotation of the IDEFIX formalization to make it more accessible; (2...CDIF. The objective is to get from many versions of the IDEFIX language to a common formal version. • That the rule constraint language (RCL) will

  20. Oil Reserve: Some Concerns Remain About SPR Drawdown and Distribution

    DTIC Science & Technology

    1990-11-01

    and to the ARCO ter- minal in Texas City , Texas. These terminals provide connections to two marine terminals and nine refineries in Texas. 0 Texoma...RCED-91-16 Oil Reserve: Some Concerns Remain Chater 2 DOE’s Egbleatis of Crient Drawdown Capabllity Appear Reamnable, but Tankeir MAmilability Col

  1. 18. A view looking southeast at the remains of the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. A view looking southeast at the remains of the director's office, his reception room and a portion of the elevator lobby. These two rooms were equipped with their own air conditioners. - John T. Beasley Building, 632 Cherry Street (between Sixth & Seventh Streets), Terre Haute, Vigo County, IN

  2. 1. View from Roundhouse roof showing remains of gable (north) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. View from Roundhouse roof showing remains of gable (north) end and clerestory monitor of Machine Shop. - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Machine Shop, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

  3. Ancient DNA in human bone remains from Pompeii archaeological site.

    PubMed

    Cipollaro, M; Di Bernardo, G; Galano, G; Galderisi, U; Guarino, F; Angelini, F; Cascino, A

    1998-06-29

    aDNA extraction and amplification procedures have been optimized for Pompeian human bone remains whose diagenesis has been determined by histological analysis. Single copy genes amplification (X and Y amelogenin loci and Y specific alphoid repeat sequences) have been performed and compared with anthropometric data on sexing.

  4. DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, TRAM TRESTLE AND WATER TANK, LOOKING NORTHWEST. HIS VIEW IS TAKEN FROM THE THIRD LEVEL OF THE MILL, NEARBY THE BLACKSMITH'S FORGE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  5. Aftermath. The remains of the southwest end of the bridge ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aftermath. The remains of the southwest end of the bridge lie next to the southwest pier. View is south-southeast from confluence of Trinity and South Fork Trinity Rivers - South Fork Trinity River Bridge, State Highway 299 spanning South Fork Trinity River, Salyer, Trinity County, CA

  6. REAR DETAIL OF RIGHT ENGINE AND WING. THRUST REVERSER REMAINS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REAR DETAIL OF RIGHT ENGINE AND WING. THRUST REVERSER REMAINS OPEN. MECHANICS JONI BAINE (R) AND BILL THEODORE(L) OPEN FLAP CARRIAGE ACCESS WITH AN IMPACT GUN. THEY WILL CHECK TRANSMISSION FLUID AND OIL THE JACK SCREW. AT FAR LEFT UTILITY MECHANICS BEGIN BODY POLISHING. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

  7. Remaining True to the Vision: Promoting Research in FCS

    ERIC Educational Resources Information Center

    Blackwell, Ann P.; Burgess, Anne M.

    2006-01-01

    There is an ongoing need for family and consumer sciences professionals to generate new knowledge through research and then share findings with diverse groups. Specific Action Steps describe methods to incorporate research into university curricula to promote this role. The ultimate goal is to inspire new professionals to remain true to the…

  8. Collegial Climate and Novice Teachers' Intent to Remain Teaching

    ERIC Educational Resources Information Center

    Pogodzinski, Ben; Youngs, Peter; Frank, Kenneth A.

    2013-01-01

    Using survey data from novice teachers across 99 schools, we estimated multilevel regressions to identify the association between novices' intent to remain teaching within their schools and their perceptions of the collegial climate. The results suggest that novice teachers who perceive a more positive collegial climate marked by higher degrees…

  9. Administrative Climate and Novices' Intent to Remain Teaching

    ERIC Educational Resources Information Center

    Pogodzinski, Ben; Youngs, Peter; Frank, Kenneth A.; Belman, Dale

    2012-01-01

    Using survey data from novice teachers at the elementary and middle school level across 11 districts, multilevel logistic regressions were estimated to examine the association between novices' perceptions of the administrative climate and their desire to remain teaching within their schools. We find that the probability that a novice teacher…

  10. Remains of abutments for Bridge No. 1575 at MD Rt. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Remains of abutments for Bridge No. 1575 at MD Rt. 51 in Spring Gap, Maryland, looking northeast. (Compare with HAER MD-115 photos taken 1988). - Western Maryland Railway, Cumberland Extension, Pearre to North Branch, from WM milepost 125 to 160, Pearre, Washington County, MD

  11. 6. DETAIL OF NORTH FRONT, SHOWING REMAINING WALL OF ORIGINAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. DETAIL OF NORTH FRONT, SHOWING REMAINING WALL OF ORIGINAL BUILDING AND UTILITY BRIDGE TO BUILDING ACROSS NINTH STREET HABS No. IA-160-AR. VIEW TO SOUTH. - Commercial & Industrial Buildings, Klauer Manufacturing Company Factory, 301 Ninth Street, Dubuque, Dubuque County, IA

  12. 22. Detail of remnants of winch and motor on remains ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. Detail of remnants of winch and motor on remains of machinery house platform east of drawspan; note cables (still connected to drawspan) coming off the winding drum; view to north. - Summer Street Bridge, Spanning Reserved Channel, Boston, Suffolk County, MA

  13. Robotics to Enable Older Adults to Remain Living at Home

    PubMed Central

    Pearce, Alan J.; Adair, Brooke; Ozanne, Elizabeth; Said, Catherine; Santamaria, Nick; Morris, Meg E.

    2012-01-01

    Given the rapidly ageing population, interest is growing in robots to enable older people to remain living at home. We conducted a systematic review and critical evaluation of the scientific literature, from 1990 to the present, on the use of robots in aged care. The key research questions were as follows: (1) what is the range of robotic devices available to enable older people to remain mobile, independent, and safe? and, (2) what is the evidence demonstrating that robotic devices are effective in enabling independent living in community dwelling older people? Following database searches for relevant literature an initial yield of 161 articles was obtained. Titles and abstracts of articles were then reviewed by 2 independent people to determine suitability for inclusion. Forty-two articles met the criteria for question 1. Of these, 4 articles met the criteria for question 2. Results showed that robotics is currently available to assist older healthy people and people with disabilities to remain independent and to monitor their safety and social connectedness. Most studies were conducted in laboratories and hospital clinics. Currently limited evidence demonstrates that robots can be used to enable people to remain living at home, although this is an emerging smart technology that is rapidly evolving. PMID:23304507

  14. 4. An interior view of remaining duct system and grain ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. An interior view of remaining duct system and grain separating equipment is situated within the 'Landmark' (1940) in the section above the silo portion of the structure. - Quaker Oats Cereal Factory, Southeast corner of Broadway & Mill Streets, Akron, Summit County, OH

  15. Interior of control house showing remains of controller. Moving the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of control house showing remains of controller. Moving the handle rotated the vertical shaft and porcelain cams to engage various electrical switches and activate the lift mechanism. All electrical components have been removed. - Potomac Edison Company, Chesapeake & Ohio Canal Bridge, Spanning C & O Canal South of U.S. 11, Williamsport, Washington County, MD

  16. 8. View of remains of ash bin at Armory Street ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. View of remains of ash bin at Armory Street Pump House. Ashes would be removed via a dump truck driven under the hopper above the garage door. - Lake Whitney Water Filtration Plant, Armory Street Pumphouse, North side of Armory Street between Edgehill Road & Whitney Avenue, Hamden, New Haven County, CT

  17. As Year Ends, Questions Remain for New Orleans

    ERIC Educational Resources Information Center

    Maxwell, Lesli A.

    2008-01-01

    In rebuilding public schooling in New Orleans after Hurricane Katrina, education reformers have managed to hire energetic teachers, break ground on a few new school buildings, raise public confidence, and show progress on test scores. But fundamental questions remain as the 2007-08 academic year draws to a close, including how the city's…

  18. 1. VIEW OF CRUSHING PLANT (FEATURE 19). THE REMAINS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW OF CRUSHING PLANT (FEATURE 19). THE REMAINS OF THE FINE ORE MILL (FEATURE 20) ARE IN THE BACKGROUND ON LEFT. CONCRETE RESERVOIR (FEATURE 22) IS SHOWN AT THE RIGHT EDGE OF PHOTOGRAPH FACING SOUTHWEST. - Copper Canyon Camp of the International Smelting & Refining Company, Crushing Plant, Copper Canyon, Battle Mountain, Lander County, NV

  19. 6. Remains Beneath Collapsed Engine House Roof, Showing Foundation Timbers ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Remains Beneath Collapsed Engine House Roof, Showing Foundation Timbers and Automobile Engine Connected to Pulley Wheel, Looking Southwest - David Renfrew Oil Rig, East side of Connoquenessing Creek, 0.4 mile North of confluence with Thorn Creek, Renfrew, Butler County, PA

  20. 5. View of remaining rock ledge from construction of passage ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. View of remaining rock ledge from construction of passage to enter mill (Riverdale Cotton Mill was built into the side of a hill). Partially subterranean area was popular with employees trying to escape the heat of the mill, now an unofficial smoking area. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL

  1. 15. CYLINDRICAL FISH SCALER Remnants of the wire screen remain, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. CYLINDRICAL FISH SCALER Remnants of the wire screen remain, through which the fish tumbled as the cylinder revolved. Note geared ring around cylinder, and the small drive shaft by which it was driven. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  2. Neanderthal infant and adult infracranial remains from Marillac (Charente, France).

    PubMed

    Dolores Garralda, María; Maureille, Bruno; Vandermeersch, Bernard

    2014-09-01

    At the site of Marillac, near the Ligonne River in Marillac-le-Franc (Charente, France), a remarkable stratigraphic sequence has yielded a wealth of archaeological information, palaeoenvironmental data, as well as faunal and human remains. Marillac must have been a sinkhole used by Neanderthal groups as a hunting camp during MIS 4 (TL date 57,600 ± 4,600BP), where Quina Mousterian lithics and fragmented bones of reindeer predominate. This article describes three infracranial skeleton fragments. Two of them are from adults and consist of the incomplete shafts of a right radius (Marillac 24) and a left fibula (Marillac 26). The third fragment is the diaphysis of the right femur of an immature individual (Marillac 25), the size and shape of which resembles those from Teshik-Tash and could be assigned to a child of a similar age. The three fossils have been compared with the remains of other Neanderthals or anatomically Modern Humans (AMH). Furthermore, the comparison of the infantile femora, Marillac 25 and Teshik-Tash, with the remains of several European children from the early Middle Ages clearly demonstrates the robustness and rounded shape of both Neanderthal diaphyses. Evidence of peri-mortem manipulations have been identified on all three bones, with spiral fractures, percussion pits and, in the case of the radius and femur, unquestionable cutmarks made with flint implements, probably during defleshing. Traces of periostosis appear on the fibula fragment and on the immature femoral diaphysis, although their aetiology remains unknown.

  3. Health and Safety Legislation in Australia: Complexity for Training Remains

    ERIC Educational Resources Information Center

    Bahn, Susanne; Barratt-Pugh, Llandis

    2014-01-01

    This paper presents the findings from a study that examined the impact of the National Occupational Health and Safety Strategy 2002-2012 and the harmonisation of the Work Health and Safety Act 2011 on Australian training design, delivery and outcomes. There has been a comparative reduction in work related injuries, fatalities and disease, and…

  4. Showing up, Remaining Engaged, and Partaking as Students: Resilience among Students of Mexican Descent

    ERIC Educational Resources Information Center

    Sosa, Teresa

    2012-01-01

    This paper examines the ways in which 12 high school students of Mexican descent remain resilient amid difficult and stressful realities. Through an examination of students' interview responses, a case is made that students' ability to engage in school and figure out everyday ways to partake as students are signs of resilience. This work suggests…

  5. Determinants of hospital nurse intention to remain employed: broadening our understanding

    PubMed Central

    Tourangeau, Ann E; Cummings, Greta; Cranley, Lisa A; Ferron, Era Mae; Harvey, Sarah

    2010-01-01

    Title Determinants of hospital nurse intention to remain employed: broadening ourunderstanding. Aim This paper is a report of a study to identify nurse reported determinants of intention to remain employed and to develop a model explaining determinants of hospital nurse intention to remain employed. Background A worsening shortage of nurses globally suggests that efforts must be made to promote retention of nurses. However, effective retention promotion strategies depend on understanding the factors influencing nurse retention. Methods A descriptive study using focus group methodology was implemented. Thirteen focus groups including 78 nurses were carried out in two Canadian provinces in 2007. Thematic analysis strategies were incorporated to analyse the data. Findings Eight thematic categories reflecting factors nurses described as influencing their intentions to remain employed emerged from focus groups: (1) relationships with co-workers, (2) condition of the work environment, (3) relationship with and support from one’s manager, (4) work rewards, (5) organizational support and practices, (6) physical and psychological responses to work, (7) patient relationships and other job content, and (8) external factors. A model of determinants of hospital nurse intention to remain employed is hypothesized. Conclusion Findings were both similar to and different from previous research. The overriding concept of job satisfaction was not found. Rather, nurse assessments of satisfaction within eight thematic categories were found to influence intentions to remain employed. Further testing of the hypothesized model is required to determine its global utility. Understanding determinants of intention to remain employed can lead to development of strategies that strengthen nurse retention. Incorporation of this knowledge in nurse education programmes is essential. PMID:20423434

  6. Remaining recoverable petroleum in giant oil fields of the Los Angeles Basin, southern California

    USGS Publications Warehouse

    Gautier, Donald L.; Tennyson, Marilyn E.; Cook, Troy A.; Charpentier, Ronald R.; Klett, Timothy R.

    2012-01-01

    Using a probabilistic geology-based methodology, a team of U.S. Geological Survey (USGS) scientists recently assessed the remaining recoverable oil in 10 oil fields of the Los Angeles Basin in southern California. The results of the assessment suggest that between 1.4 and 5.6 billion barrels of additional oil could be recovered from those fields with existing technology.

  7. 1. VIEW EAST/SOUTHEAST FROM LEFT TO RIGHT REMAINS OF POWER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW EAST/SOUTHEAST FROM LEFT TO RIGHT REMAINS OF POWER PLANT TEST STAND INCLUDING SUPPORT BUILDING (BACKGROUND), FLAME TRENCH (FOREGROUND) RECENT ADDITION (O-RING FACILITY) OVER OTHER FLAME TRENCH. - Marshall Space Flight Center, East Test Area, Power Plant Test Stand, Huntsville, Madison County, AL

  8. Diagnosis of aortic dextroposition on human skeletal remains.

    PubMed

    Charlier, Philippe; Costea, Georgică; Huynh-Charlier, Isabelle; Brun, Luc; de la Grandmaison, Geoffroy Lorin

    2012-03-01

    The fine macroscopic observation of a young adult female skeleton recovered from a Roman graveyard in Romania revealed distinctive flattening of the vertebra related to a right-sided aorta. Associated bone anomalies may be related to a Kartagener syndrome. This case highlights the fact that visceral anomalies may be diagnosed even on skeletal remains. Such lesions could be useful for osteo-archaeologists, of course, but also for forensic anthropologist investigators dealing with skeletonized remains (for example during the identification process of a dead body, through comparison with known medical data for missing people). More, hypotheses about cause and/or manner of death may be given, and a possibility of genetic confirmation exists.

  9. Mineral remains of early life on Earth? On Mars?

    USGS Publications Warehouse

    Iberall, Robbins E.; Iberall, A.S.

    1991-01-01

    The oldest sedimentary rocks on Earth, the 3.8-Ga Isua Iron-Formation in southwestern Greenland, are metamorphosed past the point where organic-walled fossils would remain. Acid residues and thin sections of these rocks reveal ferric microstructures that have filamentous, hollow rod, and spherical shapes not characteristic of crystalline minerals. Instead, they resemble ferric-coated remains of bacteria. Because there are no earlier sedimentary rocks to study on Earth, it may be necessary to expand the search elsewhere in the solar system for clues to any biotic precursors or other types of early life. A study of morphologies of iron oxide minerals collected in the southern highlands during a Mars sample return mission may therefore help to fill in important gaps in the history of Earth's earliest biosphere. -from Authors

  10. Radiocarbon analysis of human remains: a review of forensic applications.

    PubMed

    Ubelaker, Douglas H

    2014-11-01

    Radiocarbon analysis of organic materials, with the comparison of values with those of the post-1950 modern bomb curve, has proven useful in forensic science to help evaluate the antiquity of evidence. Applications are particularly helpful in the study of human remains, especially with those displaying advanced decomposition of soft tissues. Radiocarbon analysis can reveal if the remains relate to the modern, post-1950 era and if so, also provide information needed to evaluate the death and birth date. Sample selection and interpretation of results must be guided by knowledge of the formation and remodeling of different human tissues, as well as contextual information and the approximate age at death of the individual represented. Dental enamel does not remodel and thus captures dietary radiocarbon values at the time of juvenile formation. Most other human tissues do remodel but at differing rates and therefore collectively offer key information relative to the estimation of the death date.

  11. Dental DNA fingerprinting in identification of human remains.

    PubMed

    Girish, Kl; Rahman, Farzan S; Tippu, Shoaib R

    2010-07-01

    The recent advances in molecular biology have revolutionized all aspects of dentistry. DNA, the language of life yields information beyond our imagination, both in health or disease. DNA fingerprinting is a tool used to unravel all the mysteries associated with the oral cavity and its manifestations during diseased conditions. It is being increasingly used in analyzing various scenarios related to forensic science. The technical advances in molecular biology have propelled the analysis of the DNA into routine usage in crime laboratories for rapid and early diagnosis. DNA is an excellent means for identification of unidentified human remains. As dental pulp is surrounded by dentin and enamel, which forms dental armor, it offers the best source of DNA for reliable genetic type in forensic science. This paper summarizes the recent literature on use of this technique in identification of unidentified human remains.

  12. The impact of downsizing on remaining workers' sickness absence.

    PubMed

    Østhus, Ståle; Mastekaasa, Arne

    2010-10-01

    It is generally assumed that organizational downsizing has considerable negative consequences, not only for workers that are laid off, but also for those who remain employed. The empirical evidence with regard to effects on sickness absence is, however, inconsistent. This study employs register data covering a major part of the total workforce in Norway over the period 2000-2003. The number of sickness absence episodes and the number of sickness absence days are analysed by means of Poisson regression. To control for both observed and unobserved stable individual characteristics, we use conditional (fixed effects) estimation. The analyses provide some weak indications that downsizing may lead to slightly less sickness absence, but the overall impression is that downsizing has few if any effects on the sickness absence of the remaining employees.

  13. Remaining useful life prediction based on known usage data

    NASA Astrophysics Data System (ADS)

    Kiddy, Jason S.

    2003-08-01

    Systems Planning and Analysis, Inc. (SPA) has developed a novel statistical approach to estimating the remaining useful life of aircraft components based on known usage monitoring data. The analysis technique is known as the Remaining Useful Life Estimation (RULE) methodology. The basic premise of RULE is to determine conservative predictions for the component loads and fatigue life values from Monte Carlo simulations based on a desired component reliability. Then, as the aircraft's usage is monitored, the component life can be calculated with a known reliability based on the conservative predictions generated by the Monte Carlo simulation. The RULE methodology, which has been successfully tested on small-scale analytical problems, is ideally suited to be integrated into both rotorcraft and fixed-wing aircraft. Furthermore, modifications to the technology may prove to be applicable to wide variety of health and prognostic problems.

  14. Mandibular remains support taxonomic validity of Australopithecus sediba.

    PubMed

    de Ruiter, Darryl J; DeWitt, Thomas J; Carlson, Keely B; Brophy, Juliet K; Schroeder, Lauren; Ackermann, Rebecca R; Churchill, Steven E; Berger, Lee R

    2013-04-12

    Since the announcement of the species Australopithecus sediba, questions have been raised over whether the Malapa fossils represent a valid taxon or whether inadequate allowance was made for intraspecific variation, in particular with reference to the temporally and geographically proximate species Au. africanus. The morphology of mandibular remains of Au. sediba, including newly recovered material discussed here, shows that it is not merely a late-surviving morph of Au. africanus. Rather-as is seen elsewhere in the cranium, dentition, and postcranial skeleton-these mandibular remains share similarities with other australopiths but can be differentiated from the hypodigm of Au. africanus in both size and shape as well as in their ontogenetic growth trajectory.

  15. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  16. Remaining Pain in Early Rheumatoid Arthritis Patients Treated With Methotrexate

    PubMed Central

    Altawil, Reem; Saevarsdottir, Saedis; Wedrén, Sara; Alfredsson, Lars; Klareskog, Lars

    2016-01-01

    Objective To investigate the frequency of remaining pain in early rheumatoid arthritis (RA) after 3 months of treatment with methotrexate as the only disease modifying antirheumatic drug, with a special focus on patients with a good clinical response. Methods The study base was cases reported to a population‐based early RA cohort who had followup data from the Swedish Rheumatology Quality Register (n = 1,241). The Disease Activity Score in 28 joints European League Against Rheumatism (EULAR) response criteria were used to evaluate clinical response to treatment as good, moderate, and no response. The primary end point was remaining pain at the 3‐months followup visit, defined as pain >20 mm on a 100‐mm visual analog scale (VAS). Results Remaining pain in spite of a EULAR good response at followup was associated with higher baseline disability, using the Health Assessment Questionnaire (adjusted odds ratio [OR] 2.2 [95% confidence interval (95% CI) 1.4–3.4] per unit increase), and less baseline inflammation, using the erythrocyte sedimentation rate (adjusted OR 0.81 [95% CI 0.70–0.93] per 10‐mm increase). Similar associations were detected for remaining pain at followup in spite of low inflammatory activity, defined as a C‐reactive protein level <10. Increase in VAS pain during the treatment period was observed in 19% of the whole cohort, with frequencies in the EULAR response groups of 9% (good response), 15% (moderate response), and 45% (no response). Conclusion These results are in line with the hypothesis that a subgroup of early RA patients exhibits pain that is not inflammatory mediated, where alternative treatment strategies to traditional antiinflammatory medications need to be considered. PMID:26784398

  17. USING CONDITION MONITORING TO PREDICT REMAINING LIFE OF ELECTRIC CABLES.

    SciTech Connect

    LOFARO,R.; SOO,P.; VILLARAN,M.; GROVE,E.

    2001-03-29

    Electric cables are passive components used extensively throughout nuclear power stations to perform numerous safety and non-safety functions. It is known that the polymers commonly used to insulate the conductors on these cables can degrade with time; the rate of degradation being dependent on the severity of the conditions in which the cables operate. Cables do not receive routine maintenance and, since it can be very costly, they are not replaced on a regular basis. Therefore, to ensure their continued functional performance, it would be beneficial if condition monitoring techniques could be used to estimate the remaining useful life of these components. A great deal of research has been performed on various condition monitoring techniques for use on electric cables. In a research program sponsored by the U.S. Nuclear Regulatory Commission, several promising techniques were evaluated and found to provide trendable information on the condition of low-voltage electric cables. These techniques may be useful for predicting remaining life if well defined limiting values for the aging properties being measured can be determined. However, each technique has advantages and limitations that must be addressed in order to use it effectively, and the necessary limiting values are not always easy to obtain. This paper discusses how condition monitoring measurements can be used to predict the remaining useful life of electric cables. The attributes of an appropriate condition monitoring technique are presented, and the process to be used in estimating the remaining useful life of a cable is discussed along with the difficulties that must be addressed.

  18. Hominid mandibular remains from Sangiran: 1952-1986 collection.

    PubMed

    Kaifu, Yousuke; Aziz, Fachroel; Baba, Hisao

    2005-11-01

    Eight hominid mandibular and associated dental remains discovered between 1952-1986 from the Early Pleistocene deposits of Sangiran, Central Java, are described. Although the specimens are surface finds, their original stratigraphic positions can be reasonably inferred on the basis of coincidental sources of information. These specimens significantly increase the dento-gnathic sample available for intensive morphological investigation of the earliest Javanese hominids [Kaifu et al., 2005].

  19. Ageing, working hours and work ability.

    PubMed

    Costa, G; Sartori, S

    2007-11-01

    The current paper reports the main results of several studies carried out on Italian workers using the work ability index as a complementary tool for workers' periodical health surveillance. The work ability index shows a general decreasing trend over the years, but it changes differently according to working conditions and personal health status. In jobs with higher mental involvement and autonomy, but lower physical constraint, it remains quite constant and high over the years, while it significantly decreases with a steeper trend the higher the physical work load and the lower the job control are. Sex and working hours appear to act concurrently in influencing work ability, particularly in association with more physically demanding jobs. It is therefore necessary to adopt flexible interventions, able to give ageing shift workers a proper support for maintaining a satisfactory work ability, by means of actions addressed both to work organization and psycho-physical conditions.

  20. Skeletal preservation of children's remains in the archaeological record.

    PubMed

    Manifold, B M

    2015-12-01

    Taphonomy is an important consideration in the reconstruction of past environments and events. Taphonomic alterations and processes are commonly encountered on human skeletal remains in both archaeological and forensic contexts. It is these processes that can alter the appearance of bone after death and the properties of the bones influence their reaction to these processes thus leading to differential preservation within a skeletal sample, none more so than the remains of children. This study investigates the skeletal preservation of 790 child and adolescent skeletons from six contrasting early and late medieval cemeteries from Britain in an attempt to assess whether geographical location and geology had an effect on the overall preservation of the skeletons. Skeletons were examined from six cemeteries, namely; Auldhame in Scotland, Edix Hill and Great Chesterford from Cambridgeshire; St Oswald's Priory from Gloucester and Wharram Percy from Yorkshire, and finally, the site of Llandough in Wales. The state of preservation was assessed using the anatomical preservation index (AP1), qualitative bone index (QBI) and the bone representation index (BRI). Also the presence of natural and artificial taphonomic processes was recorded for each skeleton. The results show a specific pattern of preservation and representation for non-adult remains across all sites with some differences in the states of preservation from different geographical locations and geological influences. Children under two years of age were found to be less affected by taphonomic processes than their older counterparts.

  1. Genetic analysis of modern and historical burned human remains.

    PubMed

    von Wurmb-Schwark, Nicole; Ringleb, Arne; Gebühr, Michael; Simeoni, Eva

    2005-03-01

    Burning of corpses is a well-known funeral procedure that has been performed for a long time in many cultures. Nowadays more and more corpses are burned in crematories and buried in urns, often for practical and financial reasons. In some scientific, criminal or civil cases even after cremation there is the need of genetic investigations for identification or paternity testing. Furthermore, burned remains are the only remains left in North Europe from 1200 BC to 500 AD. This makes genetic investigation of those materials interesting for anthropological reasons. We present on one hand a systematic investigation of 10 corpses before and after the cremation and on the other hand the analysis of seven historical remains representing the bronze age. We chose the ground bone powder and the less destroyed bone parts respectively and employed a slightly modified commercially available DNA extraction method. The presence of human nuclear and mitochondrial DNA was tested by a simple but highly sensitive Duplex-PCR. DNA quantification was done using real time PCR, and genetic typing was tried out using the AmpFISTR Identifiler Multiplex Kit, followed by an automatic analysis on an AbiPrism310.

  2. Prognostic modelling options for remaining useful life estimation by industry

    NASA Astrophysics Data System (ADS)

    Sikorska, J. Z.; Hodkiewicz, M.; Ma, L.

    2011-07-01

    Over recent years a significant amount of research has been undertaken to develop prognostic models that can be used to predict the remaining useful life of engineering assets. Implementations by industry have only had limited success. By design, models are subject to specific assumptions and approximations, some of which are mathematical, while others relate to practical implementation issues such as the amount of data required to validate and verify a proposed model. Therefore, appropriate model selection for successful practical implementation requires not only a mathematical understanding of each model type, but also an appreciation of how a particular business intends to utilise a model and its outputs. This paper discusses business issues that need to be considered when selecting an appropriate modelling approach for trial. It also presents classification tables and process flow diagrams to assist industry and research personnel select appropriate prognostic models for predicting the remaining useful life of engineering assets within their specific business environment. The paper then explores the strengths and weaknesses of the main prognostics model classes to establish what makes them better suited to certain applications than to others and summarises how each have been applied to engineering prognostics. Consequently, this paper should provide a starting point for young researchers first considering options for remaining useful life prediction. The models described in this paper are Knowledge-based (expert and fuzzy), Life expectancy (stochastic and statistical), Artificial Neural Networks, and Physical models.

  3. [Temporary work].

    PubMed

    Del Forno, E; Candura, F

    2002-01-01

    In recent years, labour market has really changed in Italy: in addition to traditional categories of workers, self-governing or subordinate, a "tertium genus" was born, that of "temporary workers". This new modality allows firms which need to introduce temporary workers in production processes, to find them through the activity of skilled intermediary agencies. This type of agencies, regularly authorized by the Ministry of Labour, was born to select subordinates, who will work in other firms, without engagement. (The low which regulates temporary work in Italy is the Act n. 196 of 1997). The subject analysed the most closely in the text, is the really interesting question of responsibility for prevention, safety and health in work places: in fact, temporary work creates a complex system of bilateral relations, but the only real work contract is between provider firms and temporary workers. The Act n. 196 states that the provider firm must fulfill its duties of contribution, security, aid and insurance against industrial accidents and occupational diseases. Therefore, according to a series of argumentations developed in the text, only the occupational health consultant designated by the temporary agency is reasonably responsible for medical supervision, but he has to coordinate and collaborate with the occupational health consultant of third firms (Directive 383 of 1991 and article 7 of Legislative Decree n. 626 of 1994). On the contrary, firms which need temporary workers, must fulfill duties of information and training for workers. As a consequence, to draw a conclusion, on the ground of principles of European Union and national laws (in force since '50s in this field), the responsibility for medical supervision falls on temporary agencies; on the contrary, economic responsibility falls on firms which request workers, in order to achieve protection of workers' health.

  4. Leprosy: ancient disease remains a public health problem nowadays*

    PubMed Central

    Noriega, Leandro Fonseca; Chiacchio, Nilton Di; Noriega, Angélica Fonseca; Pereira, Gilmayara Alves Abreu Maciel; Vieira, Marina Lino

    2016-01-01

    Despite being an ancient disease, leprosy remains a public health problem in several countries - particularly in India, Brazil and Indonesia. The current operational guidelines emphasize the evaluation of disability from the time of diagnosis and stipulate as fundamental principles for disease control: early detection and proper treatment. Continued efforts are needed to establish and improve quality leprosy services. A qualified primary care network that is integrated into specialized service and the development of educational activities are part of the arsenal in the fight against the disease, considered neglected and stigmatizing. PMID:27579761

  5. Leprosy: ancient disease remains a public health problem nowadays.

    PubMed

    Noriega, Leandro Fonseca; Chiacchio, Nilton Di; Noriega, Angélica Fonseca; Pereira, Gilmayara Alves Abreu Maciel; Vieira, Marina Lino

    2016-01-01

    Despite being an ancient disease, leprosy remains a public health problem in several countries -particularly in India, Brazil and Indonesia. The current operational guidelines emphasize the evaluation of disability from the time of diagnosis and stipulate as fundamental principles for disease control: early detection and proper treatment. Continued efforts are needed to establish and improve quality leprosy services. A qualified primary care network that is integrated into specialized service and the development of educational activities are part of the arsenal in the fight against the disease, considered neglected and stigmatizing.

  6. Global health inequity: scientific challenges remain but can be solved

    PubMed Central

    Dahl, Carol A.; Yamada, Tadataka

    2008-01-01

    Advances in science and technology have transformed the health of the populations of the developed world, with substantial increases in life expectancy and reductions in morbidity. These advances have not, however, touched the lives of the poorest people of the world — the billions living in developing countries. This Review Series on global health highlights the key factors contributing to inequity in health across the globe and the scientific questions that remain unanswered but are critical to creating effective and appropriate health solutions. The gaps in knowledge identified in this series point the way for scientists to contribute to a changed world. PMID:18382736

  7. [Identification of the cadaveric remains of Josef Mengele].

    PubMed

    Helmer, R

    1986-01-01

    In 1985 at the cemetery in Embu near Sao Paulo, Brazil, parts of a skeleton were exhumed, and now these parts have been examined in order to determine whether they are the remains of the corpse of Dr. Josef Mengele, the camp doctor of the Auschwitz Concentration Camp. The osteometrical and osteological findings ascertained correspond completely and consistently without contradiction with all the available personal data of Josef Mengele. Through a method of electronic visual mixing for the identification of the skull, it was determined that all the authentic pictures available used for comparison correspond definitely and consistently in all details to the exhumed skull.

  8. Identification of the cadaver remains of Josef Mengele.

    PubMed

    Helmer, R P

    1987-11-01

    In 1985 at the cemetery in Embu near Sao Paulo, Brazil, parts of a skeleton were exhumed, and now these parts have been examined to determine whether they are the remains of the corpse of Dr. Josef Mengele, the camp doctor of the Auschwitz concentration camp. The osteometrical and osteological findings ascertained correspond completely and consistently without contradiction with all the available personal data of Josef Mengele. Through a method of electronic visual mixing for the identification of the skull, it was determined that all the authentic pictures available used for comparison correspond definitely and consistently to the exhumed skull.

  9. Encephalitozoon cuniculi in Raw Cow's Milk Remains Infectious After Pasteurization.

    PubMed

    Kváč, Martin; Tomanová, Vendula; Samková, Eva; Koubová, Jana; Kotková, Michaela; Hlásková, Lenka; McEvoy, John; Sak, Bohumil

    2016-02-01

    This study describes the prevalence of Encephalitozoon cuniculi in raw cow's milk and evaluates the effect of different milk pasteurization treatments on E. cuniculi infectivity for severe combined immunodeficient (SCID) mice. Using a nested polymerase chain reaction approach, 1 of 50 milking cows was found to repeatedly shed E. cuniculi in its feces and milk. Under experimental conditions, E. cuniculi spores in milk remained infective for SCID mice following pasteurization treatments at 72 °C for 15 s or 85 °C for 5 s. Based on these findings, pasteurized cow's milk should be considered a potential source of E. cuniculi infection in humans.

  10. Kidney disease in children: latest advances and remaining challenges.

    PubMed

    Bertram, John F; Goldstein, Stuart L; Pape, Lars; Schaefer, Franz; Shroff, Rukshana C; Warady, Bradley A

    2016-03-01

    To mark World Kidney Day 2016, Nature Reviews Nephrology invited six leading researchers to highlight the key advances and challenges within their specialist field of paediatric nephrology. Here, advances and remaining challenges in the fields of prenatal patterning, acute kidney injury, renal transplantation, genetics, cardiovascular health, and growth and nutrition, are all discussed within the context of paediatric and neonatal patients with kidney disease. Our global panel of researchers describe areas in which further studies and clinical advances are needed, and suggest ways in which research in these areas should progress to optimize renal care and long-term outcomes for affected patients.

  11. Tuberculosis remains a challenge despite economic growth in Panama.

    PubMed

    Tarajia, M; Goodridge, A

    2014-03-01

    Tuberculosis (TB) is a disease associated with inequality, and wise investment of economic resources is considered critical to its control. Panama has recently secured its status as an upper-middle-income country with robust economic growth. However, the prioritisation of resources for TB control remains a major challenge. In this article, we highlight areas that urgently require action to effectively reduce TB burden to minimal levels. Our conclusions suggest the need for fund allocation and a multidisciplinary approach to ensure prompt laboratory diagnosis, treatment assurance and workforce reinforcement, complemented by applied and operational research, development and innovation.

  12. Remaining challenges in childhood cancer and newer targeted therapeutics.

    PubMed

    Smith, Malcolm A; Reaman, Gregory H

    2015-02-01

    Despite the enormously important and gratifying advances in cancer treatment outcomes for children with cancer, cancer remains the biggest cause of death from disease in children. Because the etiology and biology of cancers that occur in children differ dramatically from those that occur in adults, the immediate extrapolation of efficacy and safety of new cancer drugs to childhood cancer indications is not possible. We discuss factors that will play key roles in guiding pediatric oncologists as they select lines of research to pursue in their quest for more effective treatments for children with cancer.

  13. Studies on protozoa in ancient remains - A Review

    PubMed Central

    Frías, Liesbeth; Leles, Daniela; Araújo, Adauto

    2013-01-01

    Paleoparasitological research has made important contributions to the understanding of parasite evolution and ecology. Although parasitic protozoa exhibit a worldwide distribution, recovering these organisms from an archaeological context is still exceptional and relies on the availability and distribution of evidence, the ecology of infectious diseases and adequate detection techniques. Here, we present a review of the findings related to protozoa in ancient remains, with an emphasis on their geographical distribution in the past and the methodologies used for their retrieval. The development of more sensitive detection methods has increased the number of identified parasitic species, promising interesting insights from research in the future. PMID:23440107

  14. DNA Identification of Skeletal Remains from World War II Mass Graves Uncovered in Slovenia

    PubMed Central

    Marjanović, Damir; Durmić-Pašić, Adaleta; Bakal, Narcisa; Haverić, Sanin; Kalamujić, Belma; Kovačević, Lejla; Ramić, Jasmin; Pojskić, Naris; Škaro, Vedrana; Projić, Petar; Bajrović, Kasim; Hadžiselimović, Rifat; Drobnič, Katja; Huffine, Ed; Davoren, Jon; Primorac, Dragan

    2007-01-01

    Aim To present the joint effort of three institutions in the identification of human remains from the World War II found in two mass graves in the area of Škofja Loka, Slovenia. Methods The remains of 27 individuals were found in two small and closely located mass graves. The DNA was isolated from bone and teeth samples using either standard phenol/chloroform alcohol extraction or optimized Qiagen DNA extraction procedure. Some recovered samples required the employment of additional DNA purification methods, such as N-buthanol treatment. QuantifilerTM Human DNA Quantification Kit was used for DNA quantification. PowerPlex 16 kit was used to simultaneously amplify 15 short tandem repeat (STR) loci. Matching probabilities were estimated using the DNA View program. Results Out of all processed samples, 15 remains were fully profiled at all 15 STR loci. The other 12 profiles were partial. The least successful profile included 13 loci. Also, 69 referent samples (buccal swabs) from potential living relatives were collected and profiled. Comparison of victims' profile against referent samples database resulted in 4 strong matches. In addition, 5 other profiles were matched to certain referent samples with lower probability. Conclusion Our results show that more than 6 decades after the end of the World War II, DNA analysis may significantly contribute to the identification of the remains from that period. Additional analysis of Y-STRs and mitochondrial DNA (mtDNA) markers will be performed in the second phase of the identification project. PMID:17696306

  15. Ambient aerosols remain highly acidic despite dramatic sulfate reductions

    NASA Astrophysics Data System (ADS)

    Nenes, Athanasios; Weber, Rodney; Guo, Hongyu; Russell, Armistead

    2016-04-01

    The pH of fine particles has many vital environmental impacts. By affecting aerosol concentrations, chemical composition and toxicity, particle pH is linked to regional air quality and climate, and adverse effects on human health. Sulfate is often the main acid component that drives pH of fine particles (i.e., PM2.5) and is neutralized to varying degrees by gas phase ammonia. Sulfate levels have decreased by approximately 70% over the Southeastern United States in the last fifteen years, but measured ammonia levels have been fairly steady implying the aerosol may becoming more neutral. Using a chemically comprehensive data set, combined with a thermodynamic analysis, we show that PM2.5 in the Southeastern U.S. is highly acidic (pH between 0 and 2), and that pH has remained relatively unchanged throughout the past decade and a half of decreasing sulfate. Even with further sulfate reductions, pH buffering by gas-particle partitioning of ammonia is expected to continue until sulfate drops to near background levels, indicating that fine particle pH will remain near current levels into the future. These results are non-intuitive and reshape expectations of how sulfur emission reductions impact air quality in the Southeastern U.S. and possibly other regions across the globe.

  16. Prions and lymphoid organs: solved and remaining mysteries.

    PubMed

    O'Connor, Tracy; Aguzzi, Adriano

    2013-01-01

    Prion colonization of secondary lymphoid organs (SLOs) is a critical step preceding neuroinvasion in prion pathogenesis. Follicular dendritic cells (FDCs), which depend on both tumor necrosis factor receptor 1 (TNFR1) and lymphotoxin β receptor (LTβR) signaling for maintenance, are thought to be the primary sites of prion accumulation in SLOs. However, prion titers in RML-infected TNFR1 (-/-) lymph nodes and rates of neuroinvasion in TNFR1 (-/-) mice remain high despite the absence of mature FDCs. Recently, we discovered that TNFR1-independent prion accumulation in lymph nodes relies on LTβR signaling. Loss of LTβR signaling in TNFR1 (-/-) lymph nodes coincided with the de-differentiation of high endothelial venules (HEVs)-the primary sites of lymphocyte entry into lymph nodes. These findings suggest that HEVs are the sites through which prions initially invade lymph nodes from the bloodstream. Identification of HEVs as entry portals for prions clarifies a number of previous observations concerning peripheral prion pathogenesis. However, a number of questions still remain: What is the mechanism by which prions are taken up by HEVs? Which cells are responsible for delivering prions to lymph nodes? Are HEVs the main entry site for prions into lymph nodes or do alternative routes also exist? These questions and others are considered in this article.

  17. Double-shell tank remaining useful life estimates

    SciTech Connect

    Anantatmula, R.P., Westinghouse Hanford

    1996-12-02

    The existing 28 double-shell tanks (DSTS) at Hanford are currently planned to continue operation through the year 2028 when disposal schedules show removal of waste. This schedule will place the DSTs in a service life window of 4O to 60 years depending on tank construction date and actual retirement date. This paper examines corrosion- related life-limiting conditions of DSTs and reports the results of remaining useful life models developed for estimating remaining tank life. Three models based on controllable parameters such as temperature, chemistry, and relative humidity are presented for estimates to the year in which a particular DST may receive a breach in the primary tank due to pitting in the liquid or vapor region. Pitting is believed to be the life-limiting condition for DSTs,however, the region of the most aggressive pitting (vapor space or liquid) requires further investigation. The results of the models presented suggest none of the existing DSTs should fail by through-wall pitting until well beyond scheduled retrieval in 2028. The estimates of tank breach years (the year in which a tank may be expected to breach the primary tank wall) range from 2056 for pitting corrosion in the liquid region of tank 104-AW to beyond the next millennium for several tanks in the vapor region.

  18. Medulloblastoma subgroups remain stable across primary and metastatic compartments.

    PubMed

    Wang, Xin; Dubuc, Adrian M; Ramaswamy, Vijay; Mack, Stephen; Gendoo, Deena M A; Remke, Marc; Wu, Xiaochong; Garzia, Livia; Luu, Betty; Cavalli, Florence; Peacock, John; López, Borja; Skowron, Patryk; Zagzag, David; Lyden, David; Hoffman, Caitlin; Cho, Yoon-Jae; Eberhart, Charles; MacDonald, Tobey; Li, Xiao-Nan; Van Meter, Timothy; Northcott, Paul A; Haibe-Kains, Benjamin; Hawkins, Cynthia; Rutka, James T; Bouffet, Eric; Pfister, Stefan M; Korshunov, Andrey; Taylor, Michael D

    2015-03-01

    Medulloblastoma comprises four distinct molecular variants with distinct genetics, transcriptomes, and outcomes. Subgroup affiliation has been previously shown to remain stable at the time of recurrence, which likely reflects their distinct cells of origin. However, a therapeutically relevant question that remains unanswered is subgroup stability in the metastatic compartment. We assembled a cohort of 12-paired primary-metastatic tumors collected in the MAGIC consortium, and established their molecular subgroup affiliation by performing integrative gene expression and DNA methylation analysis. Frozen tissues were collected and profiled using Affymetrix gene expression arrays and Illumina methylation arrays. Class prediction and hierarchical clustering were performed using existing published datasets. Our molecular analysis, using consensus integrative genomic data, establishes the unequivocal maintenance of molecular subgroup affiliation in metastatic medulloblastoma. We further validated these findings by interrogating a non-overlapping cohort of 19 pairs of primary-metastatic tumors from the Burdenko Neurosurgical Institute using an orthogonal technique of immunohistochemical staining. This investigation represents the largest reported primary-metastatic paired cohort profiled to date and provides a unique opportunity to evaluate subgroup-specific molecular aberrations within the metastatic compartment. Our findings further support the hypothesis that medulloblastoma subgroups arise from distinct cells of origin, which are carried forward from ontogeny to oncology.

  19. Taphonomy of the Tianyuandong human skeleton and faunal remains.

    PubMed

    Fernández-Jalvo, Yolanda; Andrews, Peter; Tong, HaoWen

    2015-06-01

    Tianyuan Cave is an Upper Palaeolithic site, 6 km from the core area of the Zhoukoudian Site Complex. Tianyuandong (or Tianyuan Cave) yielded one ancient (though not the earliest) fossil skeleton of Homo sapiens in China (42-39 ka cal BP). Together with the human skeleton, abundant animal remains were found, but no stone tools were recovered. The animal fossil remains are extremely fragmentary, in contrast to human skeletal elements that are, for the most part, complete. We undertook a taphonomic study to investigate the circumstances of preservation of the human skeleton in Tianyuan Cave, and in course of this we considered four hypotheses: funerary ritual, cannibalism, carnivore activity or natural death. Taphonomic results characterize the role of human action in the site and how these agents acted in the past. Because of disturbance of the human skeleton during its initial excavation, it is not known if it was in a grave cut or if there was any funerary ritual. No evidence was found for cannibalism or carnivore activity in relation to the human skeleton, suggesting natural death as the most reasonable possibility.

  20. Detection of Buried Human Remains Using Bioreporter Fluorescence

    SciTech Connect

    Vass, A. Dr.; Singleton, G. B.

    2001-10-01

    The search for buried human remains is a difficult, laborious and time-consuming task for law enforcement agencies. This study was conducted as a proof of principle demonstration to test the concept of using bioreporter microorganisms as a means to cover large areas in such a search. These bioreporter microorganisms are affected by a particular component of decaying organic matter that is distinct from decaying vegetation. The diamino compounds cadaverine and putrescine were selected as target compounds for the proof-of-principle investigation, and a search for microorganisms and genes that are responsive to either of these compounds was conducted. One recombinant clone was singled out for characterization based on its response to putrescine. The study results show that small concentrations of putrescine increased expression from this bioreporter construct. Although the level of increase was small (making it difficult to distinguish the signal from background), the results demonstrate the principle that bioreporters can be used to detect compounds resulting from decaying human remains and suggest that a wider search for target compounds should be conducted.

  1. CO2 studies remain key to understanding a future world.

    PubMed

    Becklin, Katie M; Walker, S Michael; Way, Danielle A; Ward, Joy K

    2017-04-01

    Contents 34 I. 34 II. 36 III. 37 IV. 37 V. 38 38 References 38 SUMMARY: Characterizing plant responses to past, present and future changes in atmospheric carbon dioxide concentration ([CO2 ]) is critical for understanding and predicting the consequences of global change over evolutionary and ecological timescales. Previous CO2 studies have provided great insights into the effects of rising [CO2 ] on leaf-level gas exchange, carbohydrate dynamics and plant growth. However, scaling CO2 effects across biological levels, especially in field settings, has proved challenging. Moreover, many questions remain about the fundamental molecular mechanisms driving plant responses to [CO2 ] and other global change factors. Here we discuss three examples of topics in which significant questions in CO2 research remain unresolved: (1) mechanisms of CO2 effects on plant developmental transitions; (2) implications of rising [CO2 ] for integrated plant-water dynamics and drought tolerance; and (3) CO2 effects on symbiotic interactions and eco-evolutionary feedbacks. Addressing these and other key questions in CO2 research will require collaborations across scientific disciplines and new approaches that link molecular mechanisms to complex physiological and ecological interactions across spatiotemporal scales.

  2. Migrant Education: Thirty Years of Success, but Challenges Remain.

    ERIC Educational Resources Information Center

    Perry, John D.

    Despite over 30 years of work by the Migrant Education Program (MEP), rural migrant students may still be the most disadvantaged student population in the nation. Migrant youth problems include constant adjustment to a new environment, cultural differences, and lack of language skills. In defining these problems, this report looks at a typical…

  3. Middle Paleolithic human remains from the Gruta da Oliveira (Torres Novas), Portugal.

    PubMed

    Trinkaus, Erik; Maki, Julia; Zilhão, João

    2007-10-01

    Ongoing excavations in the Middle Paleolithic levels at the Gruta da Oliveira, Portugal have yielded four fragmentary human remains, a manual phalanx and an ulna from levels 9 and 10, and a humerus and a tibia from levels 18 and 19. The first two remains date to approximately 39 ka 14C BP ( approximately 43.5 ka cal BP), whereas the latter two derive from earlier in oxygen isotope stage 3. The preserved portions of the phalanx, humerus, and tibia align them morphologically with the Neandertals. In addition, the Oliveira 4 tibial diaphysis shows evidence of carnivore (probably canid) gnawing.

  4. An analysis of the alleged skeletal remains of Carin Göring.

    PubMed

    Kjellström, Anna; Edlund, Hanna; Lembring, Maria; Ahlgren, Viktoria; Allen, Marie

    2012-01-01

    In 1991, treasure hunters found skeletal remains in an area close to the destroyed country residence of former Nazi leader Hermann Göring in northeastern Berlin. The remains, which were believed to belong to Carin Göring, who was buried at the site, were examined to determine whether it was possible to make a positive identification. The anthropological analysis showed that the remains come from an adult woman. The DNA analysis of several bone elements showed female sex, and a reference sample from Carin's son revealed mtDNA sequences identical to the remains. The profile has one nucleotide difference from the Cambridge reference sequence (rCRS), the common variant 263G. A database search resulted in a frequency of this mtDNA sequence of about 10% out of more than 7,000 European haplotypes. The mtDNA sequence found in the ulna, the cranium and the reference sample is, thus, very common among Europeans. Therefore, nuclear DNA analysis was attempted. The remains as well as a sample from Carin's son were successfully analysed for the three nuclear markers TH01, D7S820 and D8S1179. The nuclear DNA analysis of the two samples revealed one shared allele for each of the three markers, supporting a mother and son relationship. This genetic information together with anthropological and historical files provides an additional piece of circumstantial evidence in our efforts to identify the remains of Carin Göring.

  5. An Analysis of the Alleged Skeletal Remains of Carin Göring

    PubMed Central

    Kjellström, Anna; Edlund, Hanna; Lembring, Maria; Ahlgren, Viktoria; Allen, Marie

    2012-01-01

    In 1991, treasure hunters found skeletal remains in an area close to the destroyed country residence of former Nazi leader Hermann Göring in northeastern Berlin. The remains, which were believed to belong to Carin Göring, who was buried at the site, were examined to determine whether it was possible to make a positive identification. The anthropological analysis showed that the remains come from an adult woman. The DNA analysis of several bone elements showed female sex, and a reference sample from Carin's son revealed mtDNA sequences identical to the remains. The profile has one nucleotide difference from the Cambridge reference sequence (rCRS), the common variant 263G. A database search resulted in a frequency of this mtDNA sequence of about 10% out of more than 7,000 European haplotypes. The mtDNA sequence found in the ulna, the cranium and the reference sample is, thus, very common among Europeans. Therefore, nuclear DNA analysis was attempted. The remains as well as a sample from Carin's son were successfully analysed for the three nuclear markers TH01, D7S820 and D8S1179. The nuclear DNA analysis of the two samples revealed one shared allele for each of the three markers, supporting a mother and son relationship. This genetic information together with anthropological and historical files provides an additional piece of circumstantial evidence in our efforts to identify the remains of Carin Göring. PMID:23284605

  6. A Study on Generic Representation of Skeletal Remains Replication of Prehistoric Burial

    NASA Astrophysics Data System (ADS)

    Shao, C.-W.; Chiu, H.-L.; Chang, S.-K.

    2015-08-01

    Generic representation of skeletal remains from burials consists of three dimensions which include physical anthropologists, replication technicians, and promotional educators. For the reason that archaeological excavation is irreversible and disruptive, detail documentation and replication technologies are surely needed for many purposes. Unearthed bones during the process of 3D digital scanning need to go through reverse procedure, 3D scanning, digital model superimposition, rapid prototyping, mould making, and the integrated errors generated from the presentation of colours and textures are important issues for the presentation of replicate skeleton remains among professional decisions conducted by physical anthropologists, subjective determination of makers, and the expectations of viewers. This study presents several cases and examines current issues on display and replication technologies for human skeletal remains of prehistoric burials. This study documented detail colour changes of human skeleton over time for the reference of reproduction. The tolerance errors of quantification and required technical qualification is acquired according to the precision of 3D scanning, the specification requirement of rapid prototyping machine, and the mould making process should following the professional requirement for physical anthropological study. Additionally, the colorimeter is adopted to record and analyse the "colour change" of the human skeletal remains from wet to dry condition. Then, the "colure change" is used to evaluate the "real" surface texture and colour presentation of human skeletal remains, and to limit the artistic presentation among the human skeletal remains reproduction. The"Lingdao man No.1", is a well preserved burial of early Neolithic period (8300 B.P.) excavated from Liangdao-Daowei site, Matsu, Taiwan , as the replicating object for this study. In this study, we examined the reproduction procedures step by step for ensuring the surface

  7. Weight references for burned human skeletal remains from Portuguese samples.

    PubMed

    Gonçalves, David; Cunha, Eugénia; Thompson, Tim J U

    2013-09-01

    Weight is often one of the few recoverable data when analyzing human cremains but references are still rare, especially for European populations. Mean weights for skeletal remains were thus documented for Portuguese modern cremations of both recently deceased individuals and dry skeletons, and the effect of age, sex, and the intensity of combustion was investigated using both multivariate and univariate statistics. The cremains from fresh cadavers were significantly heavier than the ones from dry skeletons regardless of sex and age cohort (p < 0.001 to p = 0.003). As expected, males were heavier than females and age had a powerful effect in female skeletal weight. The effect of the intensity of combustion in cremains weight was unclear. These weight references may, in some cases, help estimating the minimum number of individuals, the completeness of the skeletal assemblage, and the sex of an unknown individual.

  8. Storm-Related Postmortem Damage to Skeletal Remains.

    PubMed

    Maijanen, Heli; Wilson-Taylor, Rebecca J; Jantz, Lee Meadows

    2016-05-01

    In April 2011, human skeletons were exposed to heavy storms at the outdoor Anthropology Research Facility (ARF) in Knoxville, Tennessee. Of the approximate 125 skeletons at the ARF in April 2011, 30 donations exhibited postmortem damage that could be attributed to the storms. At least 20 of the affected donations exhibit postmortem damage clearly associated with hailstones due to the oval shape and similar small size of the defects observed. The irregular shape and larger size of other defects may be a product of other falling objects (e.g., tree branches) associated with the storms. Storm-related damage was observed throughout the skeleton, with the most commonly damaged skeletal elements being the scapula and ilium, but more robust elements (i.e., femora and tibiae) also displayed characteristic features of hailstone damage. Thus, hailstone damage should be considered when forensic practitioners observe unusual postmortem damage in skeletal remains recovered from the outdoor context.

  9. Advances and remaining challenges in adult literacy research.

    PubMed

    Miller, Brett; McCardle, Peggy; Hernandez, Ricardo

    2010-01-01

    Low literacy levels in adult learners pose an educational and public health challenge to practitioners and the scientific community. Increasing demands placed on literacy can limit opportunities in the workplace and access to health-related resources, negatively affecting public health. Current estimates from the National Center for Education Statistics suggest that more than 40 million adults in the United States possess only the most basic and concrete literacy skills. Despite the estimated number of learners possessing minimal literacy skills in English in the United States, there remains a paucity of research focused on adult learners to inform remediation efforts. This special issue of the Journal of Learning Disabilities represents an important step in highlighting the current scientific knowledge base and the implications for future directions and lines of inquiry with adult learners.

  10. Activated chemoreceptor arrays remain intact and hexagonally packed

    PubMed Central

    Briegel, Ariane; Beeby, Morgan; Thanbichler, Martin; Jensen, Grant J.

    2013-01-01

    Summary Bacterial chemoreceptors cluster into exquisitively sensitive, tunable, highly ordered, polar arrays. While these arrays serve as paradigms of cell signalling in general, it remains unclear what conformational changes transduce signals from the periplasmic tips, where attractants and repellents bind, to the cytoplasmic signalling domains. Conflicting reports support and contest the hypothesis that activation causes large changes in the packing arrangement of the arrays, up to and including their complete disassembly. Using electron cryotomography, here we show that in Caulobacter crescentus, chemoreceptor arrays in cells grown in different media and immediately after exposure to the attractant galactose all exhibit the same 12 nm hexagonal packing arrangement, array size and other structural parameters. ΔcheB and ΔcheR mutants mimicking attractant- or repellent-bound states prior to adaptation also show the same lattice structure. We conclude that signal transduction and amplification must be accomplished through only small, nanoscale conformational changes. PMID:21992450

  11. Hydrogen effect on remaining life of hydroprocessing reactors

    SciTech Connect

    Iwadate, T.; Nomura, T.; Watanabe, J.

    1988-02-01

    Old vintage 2.25Cr-1Mo steels used for high-temperature/pressure hydroprocessing reactors have a high potential for temper embrittlement. The cracks caused by hydrogen embrittlement (HE) have been experienced in a stainless steel overlay and base metal of hydroprocessing reactors. In this paper, the temper embrittlement behavior during long-term service is discussed using the results of isothermal temper embrittlement tests up to 30,000 h of exposure. HE susceptibility of base metals, i.e., the threshold stress intensity factor K/sub IH/ and hydrogen-assisted crack growth rate behavior are also discussed. Based on the experimental data obtained, the remaining life assessment of a 2.25Cr-1Mo steel hydroprocessing reactor is analyzed from knowledge of HE.

  12. Methodology in subliminal psychodynamic activation: basic questions remain unanswered.

    PubMed

    Fudin, Robert

    2002-04-01

    Birgegard and Sohlberg recently implied that the interchange between them and Fudin in 1999 to 2000 resolved methodological issues in subliminal psychodynamic activation research. There remain, however, unresolved problems, both logical and empirical, which impair interpretations of findings in this area. These issues include questions concerning the value of the presentation of partial vs complete messages and the parameters involved in the information processing of such stimuli. The pursuit of solutions to these problems would be most efficacious if such research were brought more in line with experimental principles and established procedures used in the presentation of subliminal stimuli. In the absence of these efforts, research in subliminal psychodynamic activation will probably continue to tend toward circular reasoning and the production of ambiguous results that will never reach a wide audience.

  13. Mining Cancer Transcriptomes: Bioinformatic Tools and the Remaining Challenges.

    PubMed

    Milan, Thomas; Wilhelm, Brian T

    2017-02-22

    The development of next-generation sequencing technologies has had a profound impact on the field of cancer genomics. With the enormous quantities of data being generated from tumor samples, researchers have had to rapidly adapt tools or develop new ones to analyse the raw data to maximize its value. While much of this effort has been focused on improving specific algorithms to get faster and more precise results, the accessibility of the final data for the research community remains a significant problem. Large amounts of data exist but are not easily available to researchers who lack the resources and experience to download and reanalyze them. In this article, we focus on RNA-seq analysis in the context of cancer genomics and discuss the bioinformatic tools available to explore these data. We also highlight the importance of developing new and more intuitive tools to provide easier access to public data and discuss the related issues of data sharing and patient privacy.

  14. Oldest Directly Dated Remains of Sheep in China

    PubMed Central

    Dodson, John; Dodson, Eoin; Banati, Richard; Li, Xiaoqiang; Atahan, Pia; Hu, Songmei; Middleton, Ryan J.; Zhou, Xinying; Nan, Sun

    2014-01-01

    The origins of domesticated sheep (Ovis sp.) in China remain unknown. Previous workers have speculated that sheep may have been present in China up to 7000 years ago, however many claims are based on associations with archaeological material rather than independent dates on sheep material. Here we present 7 radiocarbon dates on sheep bone from Inner Mongolia, Ningxia and Shaanxi provinces. DNA analysis on one of the bones confirms it is Ovis sp. The oldest ages are about 4700 to 4400 BCE and are thus the oldest objectively dated Ovis material in eastern Asia. The graphitisised bone collagen had δ13C values indicating some millet was represented in the diet. This probably indicates sheep were in a domestic setting where millet was grown. The younger samples had δ13C values indicating that even more millet was in the diet, and this was likely related to changes in foddering practices PMID:25417648

  15. Knowledge gaps in the epidemiology of Toxocara: the enigma remains.

    PubMed

    Holland, C V

    2017-01-01

    Toxocara species infect a wide range of companion, domestic and wild animals as definitive and paratenic hosts, via multiple routes of transmission, producing long-lived tissue-inhabiting larvae and resistant eggs that can survive in the external environment. Therefore Toxocara and the disease it causes in humans, toxocariasis, represents an ideal aetiological agent for the development of the one health approach. However, despite increasing awareness of the public health significance of toxocariasis, gaps in our understanding of certain key aspects of the parasite's biology and epidemiology remain. These gaps hinder our ability to integrate research effort within the veterinary, medical and environmental disciplines. This review will highlight key deficits in our understanding of nine dimensions of Toxocara epidemiology and discuss a potential scenario to develop a more integrated, one health approach to improve our understanding of the prevention and control of this complex and cryptic zoonosis.

  16. Treating to Protect: Current Cardiovascular Treatment Approaches and Remaining Needs

    PubMed Central

    Böhm, Michael; Werner, Christian

    2008-01-01

    Current best practice to reduce cardiovascular disease involves evaluating patients' global cardiovascular risk profiles and devising treatment strategies accordingly. Despite the proven efficacy of this approach, very few physicians are adequately assessing risk, and consequently patients are failing to achieve desired treatment targets. Modifying lifestyle factors, such as diet, exercise, and cessation of smoking, remains one of the simplest and most potent means of reducing risk. Newly emerging evidence suggests that moderate physical activity (such as brisk walking for 30 minutes a day), eg, by raising levels of circulating endothelial progenitor cells, improves endothelial function and enhances vascular repair. However, patients remain remarkably reluctant to lifestyle changes, even in the face of overt, life-threatening disease. Statin treatment reduces cardiovascular morbidity and death in both primary and secondary prevention studies. However, over 90% of adults at high risk for coronary heart disease fail to achieve target low-density lipoprotein cholesterol levels in spite of statin therapy. Similarly, only about 37% of patients with hypertension meet blood pressure targets. Antihypertensive drugs achieve different levels of cardioprotection. Mounting evidence links regimens containing beta-blockers or diuretics with higher incidence of type 2 diabetes. In contrast, angiotensin-converting enzyme inhibitors and angiotensin receptor blockers appear to confer extra protection on target organs on top of blood pressure reduction. The ONTARGET Trial Program is designed to clarify the importance of this effect. Educating patients, raising physicians' awareness, and implementing effective and safe treatment regimens are all necessary steps to bring about the much-needed improvements in cardiac health outcomes. PMID:18449384

  17. Social Work and Science

    ERIC Educational Resources Information Center

    Gehlert, Sarah

    2016-01-01

    Interest has grown in the past few years about the place of social work in science. Questions remain, such as whether social work should be considered a science, and if so, where it fits into the constellation of sciences. This article attempts to shed light on these questions. After briefly considering past and present constructions of science…

  18. Photoferrotrophy: Remains of an Ancient Photosynthesis in Modern Environments.

    PubMed

    Camacho, Antonio; Walter, Xavier A; Picazo, Antonio; Zopfi, Jakob

    2017-01-01

    Photoferrotrophy, the process by which inorganic carbon is fixed into organic matter using light as an energy source and reduced iron [Fe(II)] as an electron donor, has been proposed as one of the oldest photoautotrophic metabolisms on Earth. Under the iron-rich (ferruginous) but sulfide poor conditions dominating the Archean ocean, this type of metabolism could have accounted for most of the primary production in the photic zone. Here we review the current knowledge of biogeochemical, microbial and phylogenetic aspects of photoferrotrophy, and evaluate the ecological significance of this process in ancient and modern environments. From the ferruginous conditions that prevailed during most of the Archean, the ancient ocean evolved toward euxinic (anoxic and sulfide rich) conditions and, finally, much after the advent of oxygenic photosynthesis, to a predominantly oxic environment. Under these new conditions photoferrotrophs lost importance as primary producers, and now photoferrotrophy remains as a vestige of a formerly relevant photosynthetic process. Apart from the geological record and other biogeochemical markers, modern environments resembling the redox conditions of these ancient oceans can offer insights into the past significance of photoferrotrophy and help to explain how this metabolism operated as an important source of organic carbon for the early biosphere. Iron-rich meromictic (permanently stratified) lakes can be considered as modern analogs of the ancient Archean ocean, as they present anoxic ferruginous water columns where light can still be available at the chemocline, thus offering suitable niches for photoferrotrophs. A few bacterial strains of purple bacteria as well as of green sulfur bacteria have been shown to possess photoferrotrophic capacities, and hence, could thrive in these modern Archean ocean analogs. Studies addressing the occurrence and the biogeochemical significance of photoferrotrophy in ferruginous environments have been

  19. Mineralized Remains of Morphotypes of Filamentous Cyanobacteria in Carbonaceous Meteorites

    NASA Technical Reports Server (NTRS)

    Hoover, Richard B.

    2005-01-01

    ) investigations of freshly fractured interior surfaces of carbonaceous meteorites, terrestrial rocks, and recent microbial extremophiles and filamentous cyanobacteria. These studies have resulted in the detection in a several carbonaceous meteorites of the mineralized remains of a wide variety of complex filamentous trichomic microorganisms. These embedded forms are consistent in size and microstructure with well-preserved morphotypes of mat- forming filamentous trichomic cyanobacteria and the degraded remains of microfibrils of cyanobacterial sheaths. We present the results of comparative imaging studies and EDAX elemental analyses of recent cyanobacteria (e.g. Calothrix, Oscillatoria, and Lyngbya) that are similar in size, morphology and microstructure to morphotypes found embedded in meteorites. EDAX elemental studies reveal that forms found in carbonaceous meteorites often have highly carbonized sheaths in close association with permineralized filaments, trichomes and microbial cells. Ratios of critical bioelements (C:O, C:N, C:P, and C:S) reveal dramatic differences between microfossils in Earth rocks and meteorites and in filaments, trichomes, hormogonia, and cells of recent cyanobacteria.

  20. Photoferrotrophy: Remains of an Ancient Photosynthesis in Modern Environments

    PubMed Central

    Camacho, Antonio; Walter, Xavier A.; Picazo, Antonio; Zopfi, Jakob

    2017-01-01

    Photoferrotrophy, the process by which inorganic carbon is fixed into organic matter using light as an energy source and reduced iron [Fe(II)] as an electron donor, has been proposed as one of the oldest photoautotrophic metabolisms on Earth. Under the iron-rich (ferruginous) but sulfide poor conditions dominating the Archean ocean, this type of metabolism could have accounted for most of the primary production in the photic zone. Here we review the current knowledge of biogeochemical, microbial and phylogenetic aspects of photoferrotrophy, and evaluate the ecological significance of this process in ancient and modern environments. From the ferruginous conditions that prevailed during most of the Archean, the ancient ocean evolved toward euxinic (anoxic and sulfide rich) conditions and, finally, much after the advent of oxygenic photosynthesis, to a predominantly oxic environment. Under these new conditions photoferrotrophs lost importance as primary producers, and now photoferrotrophy remains as a vestige of a formerly relevant photosynthetic process. Apart from the geological record and other biogeochemical markers, modern environments resembling the redox conditions of these ancient oceans can offer insights into the past significance of photoferrotrophy and help to explain how this metabolism operated as an important source of organic carbon for the early biosphere. Iron-rich meromictic (permanently stratified) lakes can be considered as modern analogs of the ancient Archean ocean, as they present anoxic ferruginous water columns where light can still be available at the chemocline, thus offering suitable niches for photoferrotrophs. A few bacterial strains of purple bacteria as well as of green sulfur bacteria have been shown to possess photoferrotrophic capacities, and hence, could thrive in these modern Archean ocean analogs. Studies addressing the occurrence and the biogeochemical significance of photoferrotrophy in ferruginous environments have been

  1. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  2. Optimization of DNA Recovery and Amplification from Non-Carbonized Archaeobotanical Remains

    PubMed Central

    Wales, Nathan; Andersen, Kenneth; Cappellini, Enrico; Ávila-Arcos, María C.; Gilbert, M. Thomas P.

    2014-01-01

    Ancient DNA (aDNA) recovered from archaeobotanical remains can provide key insights into many prominent archaeological research questions, including processes of domestication, past subsistence strategies, and human interactions with the environment. However, it is often difficult to isolate aDNA from ancient plant materials, and furthermore, such DNA extracts frequently contain inhibitory substances that preclude successful PCR amplification. In the age of high-throughput sequencing, this problem is even more significant because each additional endogenous aDNA molecule improves analytical resolution. Therefore, in this paper, we compare a variety of DNA extraction techniques on primarily desiccated archaeobotanical remains and identify which method consistently yields the greatest amount of purified DNA. In addition, we test five DNA polymerases to determine how well they replicate DNA extracted from non-charred ancient plant remains. Based upon the criteria of resistance to enzymatic inhibition, behavior in quantitative real-time PCR, replication fidelity, and compatibility with aDNA damage, we conclude these polymerases have nuanced properties, requiring researchers to make educated decisions as to which one to use for a given task. The experimental findings should prove useful to the aDNA and archaeological communities by guiding future research methodologies and ensuring precious archaeobotanical remains are studied in optimal ways, and may thereby yield important new perspectives on the interactions between humans and past plant communities. PMID:24475182

  3. Sustaining Community Participation: What Remains After the Money Ends?

    NASA Astrophysics Data System (ADS)

    Nkansa, Grace Akukwe; Chapman, David W.

    2006-12-01

    SUSTAINING COMMUNITY PARTICIPATION: WHAT REMAINS AFTER THE MONEY ENDS? - A major concern confronting development specialists in the education sector is the sustainability of project activities and outcomes, that is, their ability to persist once external funding ends. The increased attention of international development-assistance organizations to sustainability reflects the greater recent focus on outcome-based funding. The present study investigates differences between six communities in Ghana that varied in their ability to sustain externally initiated community-participation activities beyond the life of the external development-assistance project that promoted those activities. It was hypothesized that high- and low-sustaining communities differ in eight managerial and socio-cultural dimensions suggested by earlier research to be important for sustainability of community-level activities: planning, transparency, leadership, and participation, on one hand, and, on the other, social cohesion, resources, community skills, and valuing of education. Findings indicate that leadership and social cohesion are the two most vital elements in the sustainability of organizational structures intended to promote community participation in the oversight of local schools. Other factors suggested by the model are largely subsumed under leadership, so that the model can be simplified.

  4. [New studies of COX-inhibitors, yet issues remain].

    PubMed

    Wollheim, Frank A

    2003-09-18

    Advantages and risks related to the use of selective COX-2 inhibitors when treating arthritis are currently being scrutinized by authorities and public. The discussion tends towards exaggerated claims for or against their usefulness. The issue of cardiovascular safety is still not finally settled. In an experimental study using patients with severe coronary disease, administration of celecoxib resulted in improved endothelial function together with reduced CRP levels. Gastrointestinal tolerance was studied in patients who had recently recovered from peptic ulcer bleeding. In this group of high risk patients, celecoxib was as safe as combined therapy using omeprazol and diclofenac when given for 6 months. However, both COX inhibitors caused hypertension and adverse renal effects. The second generation of selective inhibitors is being launched. Etoricoxib--related to rofecoxib--was shown to be as potent as indomethacin in the treatment of acute gout, but it caused fewer adverse reactions. In general, however, any advantage of second generation as compared to first generation COX-2 inhibitors remains to be proven. The Swedish Council on Technology Assessment in Health Care, in its "SBU Alert", has published an appraisal of celecoxib and rofecoxib, in which the need for further long-term safety studies is emphasized.

  5. Head direction maps remain stable despite grid map fragmentation.

    PubMed

    Whitlock, Jonathan R; Derdikman, Dori

    2012-01-01

    Areas encoding space in the brain contain both representations of position (place cells and grid cells) and representations of azimuth (head direction cells). Previous studies have already suggested that although grid cells and head direction cells reside in the same brain areas, the calculation of head direction is not dependent on the calculation of position. Here we demonstrate that realignment of grid cells does not affect head direction tuning. We analyzed head direction cell data collected while rats performed a foraging task in a multi-compartment environment (the hairpin maze) vs. an open-field environment, demonstrating that the tuning of head direction cells did not change when the environment was divided into multiple sub-compartments, in the hairpin maze. On the other hand, as we have shown previously (Derdikman et al., 2009), the hexagonal firing pattern expressed by grid cells in the open-field broke down into repeating patterns in similar alleys when rats traversed the multi-compartment hairpin maze. The grid-like firing of conjunctive cells, which express both grid properties and head direction properties in the open-field, showed a selective fragmentation of grid-like firing properties in the hairpin maze, while the head directionality property of the same cells remained unaltered. These findings demonstrate that head direction is not affected during the restructuring of grid cell firing fields as a rat actively moves between compartments, thus strengthening the claim that the head direction system is upstream from or parallel to the grid-place system.

  6. Atomic data for stellar spectroscopy: recent successes and remaining needs

    NASA Astrophysics Data System (ADS)

    Sneden, Christopher; Lawler, James E.; Wood, Michael P.; Den Hartog, Elizabeth A.; Cowan, John J.

    2014-11-01

    Stellar chemical composition analyses provide vital insights into galactic nucleosynthesis. Atomic line data are critical inputs to stellar abundance computations. Recent lab studies have made significant progress in refining and extending knowledge of transition probabilities, isotopic wavelength shifts, and hyperfine substructure patterns for the absorption lines that are of most interest to stellar spectroscopists. The observable neutron-capture (n-capture) element species (Z \\gt 30) have been scrutinized in lab studies by several groups. For many species the uncertainties in experimental oscillator strengths are ≤slant 10%, which permits detailed assessment of rapid and slow n-capture nucleosynthesis contributions. In this review, extreme examples of r-process-enriched stars in the galactic halo will be shown, which suggest that the description of observable n-capture abundances in these stars is nearly complete. Unfortunately, there are serious remaining concerns about the reliability of observed abundances of lighter elements. In particular, it is not clear that line formation in real stellar atmospheres is being modeled correctly. But for many elements with Z \\lt 30 the atomic transition data are not yet settled. Highlights will be given of some recent large improvements, with suggestions for the most important needs for the near future.

  7. Identifying the crystal graveyards remaining after large silicic eruptions

    NASA Astrophysics Data System (ADS)

    Gelman, Sarah E.; Deering, Chad D.; Bachmann, Olivier; Huber, Christian; Gutiérrez, Francisco J.

    2014-10-01

    The formation of crystal-poor high-silica rhyolite via extraction of interstitial melt from an upper crustal mush predicts the complementary formation of large amounts of (typically unerupted) silicic cumulates. However, identification of these cumulates remains controversial. One hindrance to our ability to identify them is a lack of clear predictions for complementary chemical signatures between extracted melts and their residues. To address this discrepancy, we present a generalized geochemical model tracking the evolution of trace elements in a magma reservoir concurrently experiencing crystallization and extraction of interstitial melt. Our method uses a numerical solution rather than analytical, thereby allowing for various dependencies between crystallinity, partition coefficients for variably compatible and/or incompatible elements, and melt extraction efficiency. Results reveal unambiguous fractionation signatures for the extracted melts, while those signatures are muted for their cumulate counterparts. Our model is first applied to a well-constrained example (Searchlight pluton, USA), and provides a good fit to geochemical data. We then extrapolate our results to understanding the relationship between volcanic and plutonic silicic suites on a global scale. Utilizing the NAVDAT database to identify crystal accumulation or depletion signatures for each suite, we suggest that many large granitoids are indeed silicic cumulates, although their crystal accumulation signature is expected to be subtle.

  8. Identifying the Crystal Graveyards Remaining After Large Silicic Eruptions

    NASA Astrophysics Data System (ADS)

    Gelman, S. E.; Deering, C. D.; Bachmann, O.; Huber, C.; Gutiérrez, F. J.

    2014-12-01

    The accumulation of voluminous crystal-poor rhyolites from an upper crustal mush environment inherently necessitates the complementary formation of unerupted silicic cumulates. However, identification of such frozen cumulates remains controversial. This has motivated us to develop of a new geochemical model aimed at better constraining the behavior of trace elements in a magma reservoir concurrently tracking crystallization and imperfect segregation of melt. We use a numerical method to solve our model equations rather than seek analytical solutions, thereby relieving overly simplistic assumptions for the dependencies between partition coefficient or melt segregation rate as functions of crystallinity. Our model allows partition coefficient to vary depending on the crystallinizing mineralogy at any particular stage in magma cooling, as well as the ability to test different rates and efficiencies of crystal-melt segregation. We apply our model first to the Searchlight Pluton as a well-constrained case study, which allows us to quantitatively test existing interpretations of that pluton. Building on this, we broaden our model to better understand the relationship between volcanic and plutonic rocks utilizing the NAVDAT database. Our results produce unambiguous fractionation signatures for segregated melts, while those signatures are muted for their cumulate counterparts. These models suggest that some large granitiods may represent accumulations of crystals, having lost melt in some cases to volcanic eruptions or to higher level evolved plutonic units, although the trace element signature of this process is expected to be subtle.

  9. Photorespiration in C4 grasses remains slow under drought conditions.

    PubMed

    Carmo-Silva, Ana E; Powers, Stephen J; Keys, Alfred J; Arrabaça, Maria Celeste; Parry, Martin A J

    2008-07-01

    The CO(2)-concentrating mechanism present in C(4) plants decreases the oxygenase activity of ribulose 1,5-bisphosphate carboxylase/oxygenase (Rubisco) and, consequently, photorespiratory rates in air. Under drought conditions, the intercellular CO(2) concentration may decrease and cause photorespiration to increase. The C(4) grasses Paspalum dilatatum Poiret, Cynodon dactylon (L.) Pers. and Zoysia japonica Steudel were grown in soil and drought was imposed by ceasing to provide water. Net CO(2) assimilation (A) and stomatal conductance to water vapour decreased with leaf dehydration. Decreased carbon and increased oxygen isotope composition were also observed under drought. The response of A to CO(2) suggested that the compensation point was zero in all species irrespective of the extent of drought stress. A slight decrease of A as O(2) concentration increased above 10% provided evidence for slow photorespiratory gas exchanges. Analysis of amino acids contained in the leaves, particularly the decrease of glycine after 30 s in darkness, supported the presence of slow photorespiration rates, but these were slightly faster in Cynodon dactylon than in Paspalum dilatatum and Zoysia japonica. Although the contents of glycine and serine increased with dehydration and mechanistic modelling of C(4) photosynthesis suggested slightly increased photorespiration rates in proportion to photosynthesis, the results provide evidence that photorespiration remained slow under drought conditions.

  10. Our Understanding of Ion Outflows from Earth and Remaining Challenges

    NASA Astrophysics Data System (ADS)

    Yau, A. W.

    2015-12-01

    The discovery of energetic ion beams and conics by Shelley et al. and transversely accelerated ions by Klumpar in the 1970's heralded the extensive satellite, rocket, and radar observations of ion outflows over the past four decades. This body of observation has shaped our contemporary view on ion outflows and their important role in magnetosphere-ionosphere coupling. The variety of ion outflows may be categorized into thermal and suprathermal outflows. Both categories of outflows are strongly influenced by solar EUV irradiance and solar wind energy input, and the state of the magnetosphere, ionosphere, thermosphere, and (at times) plasmasphere. Several important challenges remain in our quest for a fully quantitative, multi-scale understanding of ion outflows. These include the detection of the lowest-energy ions in the tenuous sunlit magnetosphere; the influence of these hidden ions in the magnetosphere; ion transit between low and high altitudes at quiet times; the role of microscale processes; the simultaneous monitoring of different outflow populations and their circulation and redistributions in the magnetosphere; the influence of solar energy input, the thermosphere and the plasmasphere on outflow composition, characteristics, and variability; and the effects of this variability on the coupling between thermal and suprathermal outflows and on the overall magnetosphere-ionosphere coupling.

  11. Isotope Tales: Remaining Problems, Unsolvable Questions, and Gentle Successes

    NASA Astrophysics Data System (ADS)

    fogel, marilyn; bradley, christina; newsome, seth; filipp, fabian

    2014-05-01

    Earth's biomes function and adapt today as climate changes and ecosystems and the organisms within them adapt. Stable isotope biogeochemistry has had a major influence in understanding climate perturbations and continues to be an active area of research on many fronts. Banking on the success of compound specific stable isotope analyses of amino acids, nitrogen, carbon, and hydrogen isotopes continue to reveal subtle shifts in oceanic food webs and metabolic changes in microbes, plants, and animals. A biochemical understanding of exactly how organisms process and partition stable isotopes during metabolism remains unsolved, but is required if this field is to move beyond description to quantitation. Although the patterns of carbon and nitrogen isotopes are fairly well established in the common amino acids, we need to consider specifics: How do shifting metabolic pathways (metabolomics) influence the outcome of stable isotope partitioning? What influence does the gut microflora in animals have on isotopic labeling? What are the intramolecular isotope patterns of common amino acids and what do they tell us? What can be learned with other isotope systems, such as hydrogen? Results and ideas of how to move forward in this field will be presented starting at the molecular level and ending with ecosystems.

  12. Are the alleged remains of Johann Sebastian Bach authentic?

    PubMed

    Zegers, Richard H C; Maas, Mario; Koopman, A Ton G; Maat, George J R

    2009-02-16

    A skeleton alleged to be that of Johann Sebastian Bach (1685-1750) was exhumed from a graveyard in Leipzig, Germany, in 1894, but its authenticity is not established. In 1895, anatomist Wilhelm His concluded from his examination of the skeleton and reconstruction of the face that it most likely belonged to Bach. In 1949, surgeon Wolfgang Rosenthal noticed exostoses on the skeleton and on x-rays of 11 living organists and proposed a condition, Organistenkrankheit, which he interpreted as evidence that the skeleton was Bach's. However, our critical assessment of the remains analysis raises doubts: the localisation of the grave was dubious, and the methods used by His to reconstruct the face are controversial. Also, our study of the pelvic x-rays of 12 living professional organists failed to find evidence for the existence of Organistenkrankheit. We believe it is unlikely that the skeleton is that of Bach; techniques such as DNA analysis might help resolve the question but, to date, church authorities have not approved their use on the skeleton.

  13. Completely open-foldable domes remaining cool in sunshine

    NASA Astrophysics Data System (ADS)

    Hammerschlag, Robert H.; Deelen, Sander; Hoogendoorn, Pieter W.; Kommers, Johannes N. M.; Sonner, Thomas; Simoes, Roberto; Grassin, Olivier; Fischer, Andreas; Visser, Simon; Thewissen, Kristof

    2016-07-01

    These open-foldable very light-weight domes, based on very strong textile membranes highly tensioned between steel bows, are designed for bad-weather protection and maintenance of instruments for astronomical, meteorological and civil-engineering measurements and have extremely high wind stability. The domes of the GREGOR telescope and the Dutch Open Telescope are the two existing prototypes. Improvements were developed with all parts light-colored to remain cool in solar light. The new specially made connection parts (eyes) between the textile parts are made from white-colored PETP, a very strong and UV-stable synthetic, and have a better geometrical shape giving higher stability. The rubber seal tubes on top of the dome were of black-colored chloride rubber CR (neoprene), strong and UV stable, but very warm in sunlight. New UV-stable EPDM rubber tubes were produced in natural light color. To get this rubber stiff enough to give good sealing, a black-colored stiff EPDM rubber is put inside the light-colored one. Tests were performed and the forces necessary for compression of the rubber tubes were measured. An inside black tube with a circa 1.3 times larger compression force than the original black tubes was applied. The assembling of the black tubes into the light-colored tubes was successfully applied at the DOT and GREGOR domes.

  14. National Endoscopy Quality Improvement Program Remains Suboptimal in Korea

    PubMed Central

    Cha, Jae Myung; Moon, Jeong Seop; Chung, Il-Kwun; Kim, Jin-Oh; Im, Jong Pil; Cho, Yu Kyung; Kim, Hyun Gun; Lee, Sang Kil; Lee, Hang Lak; Jang, Jae Young; Kim, Eun Sun; Jung, Yunho; Moon, Chang Mo; Kim, Yeol; Park, Bo Young

    2016-01-01

    Background/Aims We evaluated the characteristics of the National Cancer Screening Program (NCSP) and opinions regarding the National Endoscopy Quality Improvement Program (NEQIP). Methods We surveyed physicians performing esophagogastroduodenoscopy and/or colonoscopy screenings as part of the NCSP via e-mail between July and August in 2015. The 32-item survey instrument included endoscopic capacity, sedation, and reprocessing of endoscopes as well as opinions regarding the NEQIP. Results A total of 507 respondents were analyzed after the exclusion of 40 incomplete answers. Under the current capacity of the NCSP, the typical waiting time for screening endoscopy was less than 4 weeks in more than 90% of endoscopy units. Performance of endoscopy reprocessing was suboptimal, with 28% of respondents using unapproved disinfectants or not knowing the main ingredient of their disinfectants and 15% to 17% of respondents not following reprocessing protocols. Agreement with the NEQIP was optimal, because only 5.7% of respondents did not agree with NEQIP; however, familiarity with the NEQIP was suboptimal, because only 37.3% of respondents were familiar with the NEQIP criteria. Conclusions The NEQ-IP remains suboptimal in Korea. Given the suboptimal performance of endoscopy reprocessing and low familiarity with the NEQIP, improved quality in endoscopy reprocessing and better understanding of the NEQIP should be emphasized in Korea. PMID:27282270

  15. DNA Profiling Success Rates from Degraded Skeletal Remains in Guatemala.

    PubMed

    Johnston, Emma; Stephenson, Mishel

    2016-07-01

    No data are available regarding the success of DNA Short Tandem Repeat (STR) profiling from degraded skeletal remains in Guatemala. Therefore, DNA profiling success rates relating to 2595 skeletons from eleven cases at the Forensic Anthropology Foundation of Guatemala (FAFG) are presented. The typical postmortem interval was 30 years. DNA was extracted from bone powder and amplified using Identifiler and Minifler. DNA profiling success rates differed between cases, ranging from 50.8% to 7.0%, the overall success rate for samples was 36.3%. The best DNA profiling success rates were obtained from femur (36.2%) and tooth (33.7%) samples. DNA profiles were significantly better from lower body bones than upper body bones (p = <0.0001). Bone samples from males gave significantly better profiles than samples from females (p = <0.0001). These results are believed to be related to bone density. The findings are important for designing forensic DNA sampling strategies in future victim recovery investigations.

  16. Remaining lifetime modeling using State-of-Health estimation

    NASA Astrophysics Data System (ADS)

    Beganovic, Nejra; Söffker, Dirk

    2017-08-01

    Technical systems and system's components undergo gradual degradation over time. Continuous degradation occurred in system is reflected in decreased system's reliability and unavoidably lead to a system failure. Therefore, continuous evaluation of State-of-Health (SoH) is inevitable to provide at least predefined lifetime of the system defined by manufacturer, or even better, to extend the lifetime given by manufacturer. However, precondition for lifetime extension is accurate estimation of SoH as well as the estimation and prediction of Remaining Useful Lifetime (RUL). For this purpose, lifetime models describing the relation between system/component degradation and consumed lifetime have to be established. In this contribution modeling and selection of suitable lifetime models from database based on current SoH conditions are discussed. Main contribution of this paper is the development of new modeling strategies capable to describe complex relations between measurable system variables, related system degradation, and RUL. Two approaches with accompanying advantages and disadvantages are introduced and compared. Both approaches are capable to model stochastic aging processes of a system by simultaneous adaption of RUL models to current SoH. The first approach requires a priori knowledge about aging processes in the system and accurate estimation of SoH. An estimation of SoH here is conditioned by tracking actual accumulated damage into the system, so that particular model parameters are defined according to a priori known assumptions about system's aging. Prediction accuracy in this case is highly dependent on accurate estimation of SoH but includes high number of degrees of freedom. The second approach in this contribution does not require a priori knowledge about system's aging as particular model parameters are defined in accordance to multi-objective optimization procedure. Prediction accuracy of this model does not highly depend on estimated SoH. This model

  17. Skeletal manifestations of tuberculosis in modern human remains.

    PubMed

    Steyn, Maryna; Buskes, Jenifer

    2016-10-01

    Paleopathologists study the presence of diseases in the past and as such have a vast knowledge of skeletal changes associated with different conditions. Tuberculosis is one of the most studied diseases and still remains a major health problem today. Its manifestations in past populations have been extensively described, but less is known about its bony involvement in the post-antibiotic era. The aim of this study was to assess the frequency and manifestations of skeletal lesions in the post-antibiotic era in a South African sample and compare it to that found before the introduction of antibiotics. Skeletons of 205 individuals from modern skeletal collections and who are known to have died from TB were assessed. It was found that 39.2% of all individuals dying in the post-antibiotic era showed skeletal changes that could be associated with TB, while another 27.5% showed nonspecific changes. The highest incidences were found in individuals who died after 1985, when co-infection with HIV and drug resistance became common. While, as expected, vertebral and rib changes were the most common, the number of individuals who showed changes to the skull, and specifically intracranially, was surprising. These could most probably be associated with TB meningitis, although this specific cause of death was noted in only a few individuals. It seems that individuals may be living longer as a result of long-term antibiotic use, leaving more time for lesions to develop. Clin. Anat. 29:854-861, 2016. © 2016 Wiley Periodicals, Inc.

  18. Remaining Life Expectancy Measurement and PSA Screening of Older Men.

    PubMed

    Kotwal, Ashwin A; Mohile, Supriya G; Dale, William

    2012-07-01

    BACKGROUND: Guidelines recommend informed decision-making regarding prostate specific antigen (PSA) screening for men with at least 10 years of remaining life expectancy (RLE). Comorbidity measures have been used to judge RLE in previous studies, but assessments based on other common RLE measures are unknown. We assessed whether screening rates varied based on four clinically relevant RLE measures, including comorbidities, in a nationally-representative, community-based sample. METHODS: Using the National Social Life, Health and Aging Project (NSHAP), we selected men over 65 without prostate cancer (n=709). They were stratified into three RLE categories (0-7 years, 8-12 years, and 13+ years) based on validated measures of comorbidities, self-rated health status, functional status, and physical performance. The independent relationship of each RLE measure and a combined measure to screening was determined using multivariable logistic regressions. RESULTS: Self-rated health (OR = 6.82; p < 0.01) most closely correlated with RLE-based screening, while the comorbidity index correlated the least (OR = 1.50; p = 0.09). The relationship of RLE to PSA screening significantly strengthened when controlling for the number of doctor visits, particularly for comorbidities (OR= 43.6; p < 0.001). Men who had consistent estimates of less than 7 years RLE by all four measures had an adjusted PSA screening rate of 43.3%. CONCLUSIONS: Regardless of the RLE measure used, men who were estimated to have limited RLE had significant PSA screening rates. However, different RLE measures have different correlations with PSA screening. Specific estimates of over-screening should therefore carefully consider the RLE measure used.

  19. New WHO member hopes to remain AIDS-free.

    PubMed

    1993-01-01

    Tuvalu is a country of slightly more than 8000 inhabitants spread over 3 small reef islands and 6 atolls approximately 1000 km north of Fiji. It gained independence from the United Kingdom in 1978 and was admitted to the World Health Organization (WHO) in May 1993. Although Tuvalu had a national AIDS program before being admitted to WHO, WHO's Western Pacific Regional OFfice now supports the program. No case of HIV infection has been reported in Tuvalu, but an active AIDS committee nonetheless oversees health education and promotion activities. For example, the 300 seamen being trained at the Tuvalu Maritime School to work on ships internationally are taught on sexually transmitted disease and HIV prevention education as part of their coursework. Youth leaders and Sunday school teachers have also been recruited to spread the word on AIDS prevention. Finally, WHO expresses its approval of Tuvalu's policy against restricting people infected with HIV, including short-term travellers.

  20. Major remaining gaps in models of sensorimotor systems

    PubMed Central

    Loeb, Gerald E.; Tsianos, George A.

    2015-01-01

    Experimental descriptions of the anatomy and physiology of individual components of sensorimotor systems have revealed substantial complexity, making it difficult to intuit how complete systems might work. This has led to increasing efforts to develop and employ mathematical models to study the emergent properties of such systems. Conversely, the development of such models tends to reveal shortcomings in the experimental database upon which models must be constructed and validated. In both cases models are most useful when they point up discrepancies between what we think we know and possibilities that we may have overlooked. This overview considers those components of complete sensorimotor systems that currently appear to be potentially important but poorly understood. These are generally omitted completely from modeled systems or buried in implicit assumptions that underlie the design of the model. PMID:26089795

  1. Economic gas resources remain in western Canada Triassic plays

    SciTech Connect

    Dallaire, S.M.; Waghmare, R.R.; Roux, L.; Conn, R.F. )

    1994-12-12

    This article reviews the estimates of economic potential of the undiscovered natural gas resources estimated to exist in the Triassic System of the interior plains region of the Western Canada sedimentary basin. This work was recently released as Part 2 of Geological Survey of Canada (GSC) Bulletin 483. It is the second in a series of multidisciplinary studies reviewing the petroleum geology, discovered and undiscovered gas resources, and economic potential of natural gas in the Western Canada basin. Economic potential measures the portion of the undiscovered resource which can be expected to provide economic investment opportunities over the long term. By taking costs and other economic constraints into account, a more realistic estimate of the resources of commercial interest to industry is provided. Estimates of economic potential are also relevant in supply/demand forecasting, in the resource management mandates of governments and regulatory bodies, and in the strategic planning of transportation systems.

  2. Should remaining stockpiles of smallpox virus (variola) be destroyed?

    PubMed

    Weinstein, Raymond S

    2011-04-01

    In 2011, the World Health Organization will recommend the fate of existing smallpox stockpiles, but circumstances have changed since the complete destruction of these cultures was first proposed. Recent studies suggest that variola and its experimental surrogate, vaccinia, have a remarkable ability to modify the human immune response through complex mechanisms that scientists are only just beginning to unravel. Further study that might require intact virus is essential. Moreover, modern science now has the capability to recreate smallpox or a smallpox-like organism in the laboratory in addition to the risk of nature re-creating it as it did once before. These factors strongly suggest that relegating smallpox to the autoclave of extinction would be ill advised.

  3. [Lithium and chronic kidney disease: a pathology which remains relevant].

    PubMed

    Félix, Paula; Stoermann-Chopard, Catherine; Martin, Pierre-Yves

    2010-03-03

    Lithium continues to be the standard for acute and maintenance treatment of bipolar mood disorders despite the availability of alternative agents. Lithium has a narrow therapeutic index and can result in considerable toxicity. Acute renal intoxication is well-known but chronic kidney disease should be in each doctor's mind. The main manifestations are nephrogenic diabetes insipidus (NDI) and tubulointerstitial nephritis. For NDI, the potassium sparing diuretic amiloride or a thiazide diuretic can improve polyuria. Lithium-induced ESRD in chronic tubulointerstitial nephritis is not uncommon and more prevalent (> 1% among long-term lithium patients) than previously thought. The risk of renal failure may persist even after lithium discontinuation. Additional kidney manifestations of lithium exposure include renal tubular acidosis and hypercalcemia.

  4. Additive Similarity Trees

    ERIC Educational Resources Information Center

    Sattath, Shmuel; Tversky, Amos

    1977-01-01

    Tree representations of similarity data are investigated. Hierarchical clustering is critically examined, and a more general procedure, called the additive tree, is presented. The additive tree representation is then compared to multidimensional scaling. (Author/JKS)

  5. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  6. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  7. Diagenetic signals from ancient human remains - bioarchaeological applications

    NASA Astrophysics Data System (ADS)

    Szostek, Krzysztof; Stepańczak, Beata; Szczepanek, Anita; Kępa, Małgorzata; Głąb, Henryk; Jarosz, Paweł; Włodarczak, Piotr; Tunia, Krzysztof; Pawlyta, Jacek; Paluszkiewicz, Czesława; Tylko, Grzegorz

    2011-01-01

    This preliminary study examines the potential effects of diagenetic processes on the oxygen-isotope ratios of bone and tooth phosphate (δ18O) from skeletal material of individuals representing the Corded Ware Culture (2500-2400 BC) discovered in Malżyce (Southern Poland). Intra-individual variability of Ca/P, CI, C/P, collagen content (%) and oxygen isotopes was observed through analysis of enamel, dentin and postcranial bones. Using a variety of analytical techniques, it was found that, despite the lack of differences in soil acidity, not all the parts of a skeleton on a given site had been equally exposed to diagenetic post mortem changes. In a few cases, qualitative changes in the FTIR spectrum of analysed bones were observed. The data suggest that apart from quantitative analyses, i.e., the calculation of Ca/P, CI, C/P and collagen content, qualitative analyses such as examination of the absorbance line are recommended. The degree to which a sample is, contaminated on the basis of any additional, non-biogenic peaks, deemed to be contaminated should also be specified.

  8. Presumably bacterial remains in banded iron formations: beginning of investigations

    NASA Astrophysics Data System (ADS)

    Astafieva, M.

    2014-04-01

    Ancient Archaean and Protherozoic rocks are the model objects for investigation of rocks comprising astromaterials. Judging by their age these terrestrial rocks are the nearest to the rocks of meteorites. They are represented as a rule by deeply metamorphized layers of volcanogenic and volcanogenic-sedimentary rocks and bacterial-paleontological investigations of these rocks usually meet some difficulties. But paleontological studies of these rocks usually meet some difficulties. One of these difficulties is usual high metamorphization of rocks. That is why investigation of Archaean banded iron formations is of great importance. Banded iron formations are known everywhere. The oldest banded iron formations are met in Archaean. Their widest distribution was in Proterozoic. They are constituent part of metamorphic complexes of all ancient shields. Formation of these units ended in Phanerozoic. Peculiarity of their development in time, thin layering, rhythmyc repetitiveness are reasons of great interest to these formations. Banded iron formations are sedimentary rocks. Interbedding of ferrigenous (magnetite, hematite, siderite etc.) interlayers and siliceous layers are typical to these formations. Stratificatification is thin, thickness of interlayers is less than 1-2 mm. Iron content exceeds 15%. Potentially all minerals of ferrigenous interlayers could be of biogenic nature because both for oxygenized (hematite) and reduced (magnetite and siderite) minerals direct mechanism of bacterial production is established by microbiologists. Basic ore mineral of banded iron formations is magnetite. But magnetite origin is not clear till nowadays and this problem is very actual [2]. Nevertheless bacterial remains by themselves have not been found and it is not surprising. It is proved that finely dispersed non-completely formed magnetite compose basic mass of magnetite formed for example by thermophylic iron-reducing bacteria. Processes of structure arrangement and crystal

  9. Disability, Work and Cash Benefits.

    ERIC Educational Resources Information Center

    Mashaw, Jerry L., Ed.; And Others

    This book contains 13 papers from a workshop convened to explore the causes of work disability and the types of interventions that might enable individuals to remain at work, return to work, or enter the work force for the first time, despite having chronic health conditions or impairments. Following an overview of the papers by editors Jerry L.…

  10. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  11. Comparison of decomposition rates between autopsied and non-autopsied human remains.

    PubMed

    Bates, Lennon N; Wescott, Daniel J

    2016-04-01

    Penetrating trauma has been cited as a significant factor in the rate of decomposition. Therefore, penetrating trauma may have an effect on estimations of time-since-death in medicolegal investigations and on research examining decomposition rates and processes when autopsied human bodies are used. The goal of this study was to determine if there are differences in the rate of decomposition between autopsied and non-autopsied human remains in the same environment. The purpose is to shed light on how large incisions, such as those from a thorocoabdominal autopsy, effect time-since-death estimations and research on the rate of decomposition that use both autopsied and non-autopsied human remains. In this study, 59 non-autopsied and 24 autopsied bodies were studied. The number of accumulated degree days required to reach each decomposition stage was then compared between autopsied and non-autopsied remains. Additionally, both types of bodies were examined for seasonal differences in decomposition rates. As temperature affects the rate of decomposition, this study also compared the internal body temperatures of autopsied and non-autopsied remains to see if differences between the two may be leading to differential decomposition. For this portion of this study, eight non-autopsied and five autopsied bodies were investigated. Internal temperature was collected once a day for two weeks. The results showed that differences in the decomposition rate between autopsied and non-autopsied remains was not statistically significant, though the average ADD needed to reach each stage of decomposition was slightly lower for autopsied bodies than non-autopsied bodies. There was also no significant difference between autopsied and non-autopsied bodies in the rate of decomposition by season or in internal temperature. Therefore, this study suggests that it is unnecessary to separate autopsied and non-autopsied remains when studying gross stages of human decomposition in Central Texas

  12. Oncolytic viruses as immunotherapy: progress and remaining challenges

    PubMed Central

    Aurelian, Laure

    2016-01-01

    Oncolytic viruses (OVs) comprise an emerging cancer therapeutic modality whose activity involves both direct tumor cell lysis and the induction of immunogenic cell death (ICD). Cellular proteins released from the OV-lysed tumor cells, known as damage-associated molecular patterns and tumor-associated antigens, activate dendritic cells and elicit adaptive antitumor immunity. Interaction with the innate immune system and the development of long-lasting immune memory also contribute to OV-induced cell death. The degree to which the ICD component contributes to the clinical efficacy of OV therapy is still unclear. Modulation of a range of immune interactions may be beneficial or detrimental in nature and the interactions depend on the specific tumor, the site and extent of the disease, the immunosuppressive tumor microenvironment, the OV platform, the dose, time, and delivery conditions, as well as individual patient responses. To enhance the contribution of ICD, OVs have been engineered to express immunostimulatory genes and strategies have been developed to combine OV therapy with chemo- and immune-based therapeutic regimens. However, these approaches carry the risk that they may also be tolerogenic depending on their levels and the presence of other cytokines, their direct antiviral effects, and the timing and conditions of their expression. The contribution of autophagy to adaptive immunity, the ability of the OVs to kill cancer stem cells, and the patient’s baseline immune status are additional considerations. This review focuses on the complex and as yet poorly understood balancing act that dictates the outcome of OV therapy. We summarize current understanding of the OVs’ function in eliciting antitumor immunity and its relationship to therapeutic efficacy. Also discussed are the criteria involved in restraining antiviral immune responses and minimizing pathology while promoting antitumor immunity to override immune tolerance. PMID:27226725

  13. The use of fish remains in sediments for the reconstruction of paleoproductivity

    NASA Astrophysics Data System (ADS)

    Drago, T.; Ferreira-Bartrina, V.; Santos, A. M. P.; Pinheiro, J.

    2009-01-01

    The majority of the works concerning fish productivity are based in fish landing records. However, in order to understand the causes of variability in fish productivity (natural and/or anthropogenic) it is essential to have information from periods when human impacts (e.g., fisheries) are considered unimportant. This can be achieved through the use of fish remains, i.e. scales, vertebrae and otoliths, from sediment records. The obtained data can be used to develop time series of fish stocks revealing the history of fish population dynamics over the last centuries or millennia. The majority of these works are located in Eastern Boundary Current Systems (e.g., Benguela, Peru-Humboldt, California), because these are associated with coastal upwelling and high productivity, which in some cases is at the origin of low bottom oxygen levels, leading to scale preservation. A search for fish remains in the Portuguese margin sediments is in progress in the context of the ongoing research project POPEI (High-resolution oceanic paleoproductivity and environmental changes; correlation with fish populations), which intend to fill the gap in studies of this type for the Canary Current System. In this paper we review some general ideas of the use of fish remains, related studies, methodologies and data processing, as well as presenting the first results of POPEI.

  14. Why Japanese workers remain in the labor force so long: lessons for the United States?

    PubMed

    Williamson, John B; Higo, Masa

    2009-12-01

    As part of the search for ways to increase labor force participation rates among older workers in the United States, it makes sense to take a close look at evidence from Japan, one of the few industrial countries with a substantially higher labor force participation rate among older workers, particularly men, than the United States. Based mainly on prior studies and original interview data, we first discuss five potential factors which help explain why Japanese workers remain in the labor force as long as they do: (1) perceived economic necessity; (2) the large fraction of workers who are self-employed; (3) a culture that puts a high value on remaining in the labor force throughout the life course; (4) the long healthy life expectancy; and (5) the government's role in facilitating the labor force participation of older workers. We suggest that the Japanese national cultural value on remaining economically productive well into old age clearly underlies the development of the government's legislative initiatives aiming to extend the working lives of older workers. We then outline three policy suggestions for those seeking to increase labor force participation rates among older U.S. workers: (1) increase the financial incentive to workers who remain in the labor force; (2) improve public programs designed to foster efforts by older workers to become self-employed; and (3) increase the extent of government efforts to link older workers to prospective employers.

  15. Post-operative hemimaxillectomy rehabilitation using prostheses supported by zygoma implants and remaining natural teeth

    PubMed Central

    Qu, Xing Zhou; Wang, Ming Yi; Ong, Hui Shan; Zhang, Chen Ping

    2016-01-01

    OBJECTIVES: This study aimed to evaluate the stability of prostheses supported by zygoma implants and remaining teeth for subjects who had undergone hemi-maxillectomy. METHODS: Ten patients were included in the study. Oral rehabilitation was performed using a temporary prosthesis that was supported by remaining teeth for the first three months. Then, a zygoma implant was placed to provide support for a final prosthesis in addition to the remaining teeth. Each prosthesis was tailor-made according to biomechanical three-dimensional finite element analysis results. The patients were assessed using the prosthesis functioning scale of the Memorial Sloan-Kettering Cancer Center. In addition, retention and bite force were recorded for both the temporary prosthesis and the final prosthesis. RESULTS: The mean bite force of the prosthetic first molar was increased to 69.2 N. The mean retentive force increased to 13.5 N after zygoma implant insertion. The bite force on the prosthetic first molar was improved to 229.3 N. CONCLUSION: Bite force increased significantly with the support of a zygoma implant. The use of zygoma implants in the restoration of maxillary defects improved functional outcome and patient satisfaction. PMID:27759845

  16. Electronic Health Records: DOD and VA Have Increased Their Sharing of Health Information, but More Work Remains

    DTIC Science & Technology

    2008-07-01

    participating in recent initiatives ed by the Office of the National Coordinator for Health Information echnology (within the Department of Health...veterans, many DOD and VA patients tend to be highly mobile and may have health records residing at multiple medical facilities within

  17. Influence of oral health behavior and sociodemographic factors on remaining teeth in Korean adults

    PubMed Central

    Song, In-Seok; Han, Kyungdo; Choi, Yeon-Jo; Ryu, Jae-Jun; Park, Jun-Beom

    2016-01-01

    Abstract In this study, the number and location of remaining teeth were analyzed according to sociodemographic variables, anthropometric measurements, and oral health behavior patterns. The hypothesis was that the number and location of remaining teeth would be affected by oral health behavior and by sociodemographic factors, such as education levels, household income, and urban/rural residency. This nationwide cross-sectional study was performed with a total of 36,026 representative Korean adults aged 19 and older. The data were taken from the 2012–2012 Korea National Health and Nutrition Examination Survey. Men had, on average, significantly more remaining teeth than women did. Women brushed their teeth more often than men per day and were more likely to brush their teeth after meals. The participants with higher education levels or household income had significantly more remaining teeth; the number of daily tooth brushing was positively associated with the number of remaining teeth; urban residents had significantly more remaining teeth than rural residents; and elderly adults had fewer remaining teeth than younger adults had (all with P < 0.05). The participants were more likely to retain their incisors (especially their canines) for their entire lifetimes than do so for their molars. From the incisors to the second premolars, they had more mandibular teeth than maxillary teeth, but among molars, they had more maxillary teeth than mandibular teeth. Elementary graduates with low household income had fewer remaining teeth than did university graduates with high household income (P < 0.0001). Finally, participants with high socioeconomic status were more likely to lose their molar teeth than anterior teeth compared to those with low socioeconomic status. The participants who brushed their teeth fewer times per day, those with low household incomes and/or education levels, and those who lived in rural districts had significantly higher prevalence of tooth

  18. Enhanced Contaminated Human Remains Pouch: initial development and preliminary performance assessments

    SciTech Connect

    Iseli, A.M.; Kwen, H.D.; Ul-Alam, M.; Balasubramanian, M.; Rajagopalan, S.

    2011-11-07

    The objective is to produce a proof of concept prototype Enhanced Contaminated Human Remains Pouch (ECHRP) with self-decontamination capability to provide increased protection to emergency response personnel. The key objective was to decrease the concentration of toxic chemicals through the use of an absorbent and reactive nanocellulose liner. Additionally, nanomaterials with biocidal properties were developed and tested as a 'stand-alone' treatment. The setting was a private company research laboratory. The main outcome measures were production of a functional prototype. A functional prototype capable of mitigating the threats due to sulfur mustard, Soman, and a large variety of liquid and vapor toxic industrial chemicals was produced. Stand-alone biocidal treatment efficacy was validated. The ECHRP provides superior protection from both chemical and biological hazards to various emergency response personnel and human remains handlers.

  19. Middle Paleolithic human remains from the Gruta Da Oliveira (Torres Novas), Portugal.

    PubMed

    Willman, John C; Maki, Julia; Bayle, Priscilla; Trinkaus, Erik; Zilhão, João

    2012-09-01

    Additional Middle Paleolithic human remains from layers 17, 18, and 22 of the Gruta da Oliveira, Portugal consist of a proximal manual phalanx 2 (Oliveira 5), a partial postcanine tooth (Oliveira 6), a humeral diaphysis (Oliveira 7), a distal mandibular molar (Oliveira 8), and a mandibular premolar (P(3) ) (Oliveira 9). Oliveira 5, 6, and 8 are unremarkable for Late Pleistocene humans. The Oliveira 7 right humerus is moderately robust or the individual had the stocky body proportions of other European (including Iberian) Neandertals. The Oliveira 9 P(3) has a large and symmetrical crown and lacks a distal accessory ridge and accessory lingual cusps, overlapping both Neandertal and recent human ranges of variation. It contrasts with at least recent human P(3) s in having relatively thin enamel. These join the Oliveira 1 to 4 remains in further documenting early MIS 3 Neandertal morphology in western Iberia.

  20. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

  1. Additive Manufactured Product Integrity

    NASA Technical Reports Server (NTRS)

    Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

    2017-01-01

    NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

  2. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  3. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  4. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  5. Pygmoid Australomelanesian Homo sapiens skeletal remains from Liang Bua, Flores: population affinities and pathological abnormalities.

    PubMed

    Jacob, T; Indriati, E; Soejono, R P; Hsü, K; Frayer, D W; Eckhardt, R B; Kuperavage, A J; Thorne, A; Henneberg, M

    2006-09-05

    Liang Bua 1 (LB1) exhibits marked craniofacial and postcranial asymmetries and other indicators of abnormal growth and development. Anomalies aside, 140 cranial features place LB1 within modern human ranges of variation, resembling Australomelanesian populations. Mandibular and dental features of LB1 and LB6/1 either show no substantial deviation from modern Homo sapiens or share features (receding chins and rotated premolars) with Rampasasa pygmies now living near Liang Bua Cave. We propose that LB1 is drawn from an earlier pygmy H. sapiens population but individually shows signs of a developmental abnormality, including microcephaly. Additional mandibular and postcranial remains from the site share small body size but not microcephaly.

  6. Working Mothers

    MedlinePlus

    ... Family Life Family Life Family Life Medical Home Family Dynamics Media Work & Play Getting Involved in Your Community ... AAP Find a Pediatrician Family Life Medical Home Family Dynamics Media Work & Play Getting Involved in Your Community ...

  7. Working Parents

    MedlinePlus

    ... Family Life Family Life Family Life Medical Home Family Dynamics Media Work & Play Getting Involved in Your Community ... AAP Find a Pediatrician Family Life Medical Home Family Dynamics Media Work & Play Getting Involved in Your Community ...

  8. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  9. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  10. Remaining uncertainties in the use of Rn-222 as a quantitative tracer of submarine groundwater discharge

    USGS Publications Warehouse

    Burnett, W.C.; Santos, I.R.; Weinstein, Y.; Swarzenski, P.W.; Herut, B.

    2007-01-01

    Research performed in many locations over the past decade has shown that radon is an effective tracer for quantifying submarine groundwater discharge (SGD). The technique works because both fresh and saline groundwaters acquire radon from the subterranean environment and display activities that are typically orders of magnitude greater than those found in coastal seawaters. However, some uncertainties and unanswered problems remain. We focus here on three components of the mass balance, each of which has some unresolved issues: (1) End-member radon - what to do if groundwater Rn measurements are highly variable? (2) Atmospheric evasion -do the standard gas exchange equations work under high-energy coastal mixing scenarios? And (3) "mixing" losses - are there other significant radon losses (e.g. recharge of coastal waters into the aquifer) besides those attributed to mixing with lower-activity waters offshore? We address these issues using data sets collected from several different types of coastal environment. Copyright ?? 2007 IAHS Press.

  11. Work Overload.

    ERIC Educational Resources Information Center

    Bateman, Thomas S.

    1980-01-01

    To investigate managerial use of work (or role) overload to increase productivity, the author studied 77 nonclerical white-collar employees and found that work overload had negative effects on productivity, supervisors' ratings, employee attitudes, job satisfaction, and health. He recommends ways for managers and employees to reduce work overload.…

  12. Perceived organizational support and intention to remain: The mediating roles of career success and self-esteem.

    PubMed

    Liu, Jingying; Liu, Yan-Hui

    2016-04-01

    The aim of this study was to explore the relationships among perceived organizational support, career success, self-esteem and intention to remain. A cross-sectional study was designed, and subjects were recruited from six nonprofit organizations in China in spring 2015. A convenience sample of 610 nurses answered a survey with questions related to their ideas about their work. Structural equation modelling analyses were conducted. The results revealed that perceived organizational support was positively associated with intention to remain and career success, which, in turn, mediated the relationship between perceived organizational support and intention to remain. We also found that self-esteem mediated the relationships between perceived organizational support and career success and between career success and intention to remain. Higher perceived organizational support, career success and self-esteem can increase intention to remain in Chinese nurses.

  13. Work transitions.

    PubMed

    Fouad, Nadya A; Bynner, John

    2008-01-01

    Individuals make choices in, and adjust to, a world of work that is often a moving target. Because work is so central to human functioning, and transitions in and out of work can have major mental health repercussions, the authors argue that applied psychologists in health services need to understand those transitions. This article focuses on the different types of transition throughout a person's working life and the resources needed at different stages to ensure the success of these transitions. The authors start by examining the roles of capability and adaptability in supporting and facilitating adjustment to work transitions and their relation to identity development. They then examine the role of social and institutional contexts in shaping work transitions and their outcomes. The authors focus on voluntary versus involuntary transitions and then broaden the lens in discussing the policy implications of research on work transitions.

  14. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  15. Evidence of hypertrophic osteoarthropathy in human skeletal remains from pre-Hispanic Mesoamerica.

    PubMed

    Martínez-Lavín, M; Mansilla, J; Pineda, C; Pijoán, C; Ochoa, P

    1994-02-01

    Hypertrophic osteoarthropathy is one of the earliest recognized disease entities in the history of medicine. It has a peculiar periosteal proliferation distinctive from other bone diseases. In its advanced stage, it leaves an indelible mark on the skeleton. It has been recently shown that digital clubbing is accompanied by a bone remodeling process of the underlying phalanges. Thus, theoretically, this entity can be recognized in ancient human skeletal remains. We studied part of the collection of skeletal remains from pre-Hispanic Mesoamerica preserved at the National Museum of Anthropology of Mexico City. We examined 1000 specimens and found 2 skeletons with widespread, bilateral, symmetric periosteal proliferation of the tubular bones in addition to the bone remodeling changes of the distal phalanges. One of the specimens was from the Formative period (2000 B.C. to 100 A.D.). We conclude that hypertrophic osteoarthropathy can be recognized in ancient human skeletal remains and that this disease was present in Mesoamerica near the time of the original description of clubbing by Hippocrates about 2500 years ago.

  16. Annual and seasonal patterns of insect succession on decomposing remains at two locations in Western Australia.

    PubMed

    Voss, Sasha C; Spafford, Helen; Dadour, Ian R

    2009-12-15

    This study considered annual, seasonal and shorter term variation in patterns of insect succession onto decomposing remains at two contrasting locations in Western Australia, bushland and agricultural. The degree of consistency in insect succession patterns over spatial and temporal scales was evaluated through multivariate analysis of occurrence-based distance matrices. Insect assemblages were strongly correlated between locations, within corresponding time periods, indicating that patterns of insect succession were similar between localised sites within the same broad geographic area. This suggests that there is reasonable scope for the application of baseline succession data generated at a single study site to a range of decomposition sites within a given region. Differences were largely due to species absences at the agricultural site. Three species of Coleoptera were identified as possible representatives of bushland habitat, Ptomaphila lacrymosa (Silphidae), Omorgus tatei (Trogidae) and Helea castor (Tenebrionidae), and may be indicative of post mortem movement between habitat types. Within locations, variation in insect assemblages was not significant between years. Within years, insect assemblages varied significantly over time on a seasonal time scale and as decomposition progressed through defined decomposition stages. Forensically relevant data detailing the seasonal pattern of insect succession onto decomposing remains for Western Australia are reported. Additional focus has been directed towards hymenopteran parasitoids that frequent decomposing remains and parasitise Diptera colonisers. Parasitoids can be used to provide an extended PMI timeframe in cases where traditional forensic indicators have completed their development.

  17. Proposed classes of morphological autopsy findings for decomposed and skeletal remains in mass death investigations.

    PubMed

    Komar, Debra; Lathrop, Sarah; Potter, Wendy

    2008-12-01

    Analysis of mass death events, often involving partial or skeletal human remains, requires investigators to condense information on a large number of victims into a single report. Prosecution of war crimes typically requires that victims be categorized according to the injuries sustained. Reports recognizing only the presence or absence of trauma are misleading or misrepresentative. This study introduces a 4 class system for skeletal remains based on morphologic autopsy findings. Each class corresponds to the lethal potential of the trauma or pathologic conditions evident at autopsy, and the certainty with which cause of death can be determined. Data were extracted from 766 autopsy cases involving decomposed or skeletal remains from the New Mexico Office of the Medical Investigator in which cause and manner of death were ruled. Statistically significant associations between morphology class and the cause and manner of death, positive identification, and natural and non-natural deaths were evident in this study. Intraobserver and interobserver tests revealed excellent replicability and reliability in the assignment of morphology classes to individual cases. In addition to its mass death applications, this classification system offers potential research contributions to physical anthropologists and bioarchaeologists studying human populations in antiquity.

  18. Diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams.

    PubMed

    Byrd, Katherine M

    2015-01-01

    The conjugate addition reaction has been a useful tool in the formation of carbon-carbon bonds. The utility of this reaction has been demonstrated in the synthesis of many natural products, materials, and pharmacological agents. In the last three decades, there has been a significant increase in the development of asymmetric variants of this reaction. Unfortunately, conjugate addition reactions using α,β-unsaturated amides and lactams remain underdeveloped due to their inherently low reactivity. This review highlights the work that has been done on both diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams.

  19. Diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams

    PubMed Central

    2015-01-01

    Summary The conjugate addition reaction has been a useful tool in the formation of carbon–carbon bonds. The utility of this reaction has been demonstrated in the synthesis of many natural products, materials, and pharmacological agents. In the last three decades, there has been a significant increase in the development of asymmetric variants of this reaction. Unfortunately, conjugate addition reactions using α,β-unsaturated amides and lactams remain underdeveloped due to their inherently low reactivity. This review highlights the work that has been done on both diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams. PMID:25977728

  20. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  1. Fused Lasso Additive Model

    PubMed Central

    Petersen, Ashley; Witten, Daniela; Simon, Noah

    2016-01-01

    We consider the problem of predicting an outcome variable using p covariates that are measured on n independent observations, in a setting in which additive, flexible, and interpretable fits are desired. We propose the fused lasso additive model (FLAM), in which each additive function is estimated to be piecewise constant with a small number of adaptively-chosen knots. FLAM is the solution to a convex optimization problem, for which a simple algorithm with guaranteed convergence to a global optimum is provided. FLAM is shown to be consistent in high dimensions, and an unbiased estimator of its degrees of freedom is proposed. We evaluate the performance of FLAM in a simulation study and on two data sets. Supplemental materials are available online, and the R package flam is available on CRAN. PMID:28239246

  2. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  3. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  4. Additives in plastics.

    PubMed

    Deanin, R D

    1975-06-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products.

  5. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  6. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  7. More Than Additional Space...

    ERIC Educational Resources Information Center

    CEFP Journal, 1973

    1973-01-01

    A much needed addition to the Jamestown Elementary School turned out to be more than an expansion of walls for more space. A new educational program, a limited budget, and a short time line were tackled on a team approach basis and were successfully resolved. (Author)

  8. Mental Imagery and Visual Working Memory

    PubMed Central

    Keogh, Rebecca; Pearson, Joel

    2011-01-01

    Visual working memory provides an essential link between past and future events. Despite recent efforts, capacity limits, their genesis and the underlying neural structures of visual working memory remain unclear. Here we show that performance in visual working memory - but not iconic visual memory - can be predicted by the strength of mental imagery as assessed with binocular rivalry in a given individual. In addition, for individuals with strong imagery, modulating the background luminance diminished performance on visual working memory and imagery tasks, but not working memory for number strings. This suggests that luminance signals were disrupting sensory-based imagery mechanisms and not a general working memory system. Individuals with poor imagery still performed above chance in the visual working memory task, but their performance was not affected by the background luminance, suggesting a dichotomy in strategies for visual working memory: individuals with strong mental imagery rely on sensory-based imagery to support mnemonic performance, while those with poor imagery rely on different strategies. These findings could help reconcile current controversy regarding the mechanism and location of visual mnemonic storage. PMID:22195024

  9. Enhanced microbial coalbed methane generation: A review of research, commercial activity, and remaining challenges

    USGS Publications Warehouse

    Ritter, Daniel J.; Vinson, David S.; Barnhart, Elliott P.; Akob, Denise M.; Fields, Matthew W.; Cunningham, Al B.; Orem, William H.; McIntosh, Jennifer C.

    2015-01-01

    Coalbed methane (CBM) makes up a significant portion of the world’s natural gas resources. The discovery that approximately 20% of natural gas is microbial in origin has led to interest in microbially enhanced CBM (MECoM), which involves stimulating microorganisms to produce additional CBM from existing production wells. This paper reviews current laboratory and field research on understanding processes and reservoir conditions which are essential for microbial CBM generation, the progress of efforts to stimulate microbial methane generation in coal beds, and key remaining knowledge gaps. Research has been primarily focused on identifying microbial communities present in areas of CBM generation and attempting to determine their function, in-situ reservoir conditions that are most favorable for microbial CBM generation, and geochemical indicators of metabolic pathways of methanogenesis (i.e., acetoclastic or hydrogenotrophic methanogenesis). Meanwhile, researchers at universities, government agencies, and companies have focused on four primary MECoM strategies: 1) microbial stimulation (i.e., addition of nutrients to stimulate native microbes); 2) microbial augmentation (i.e., addition of microbes not native to or abundant in the reservoir of interest); 3) physically increasing microbial access to coal and distribution of amendments; and 4) chemically increasing the bioavailability of coal organics. Most companies interested in MECoM have pursued microbial stimulation: Luca Technologies, Inc., successfully completed a pilot scale field test of their stimulation strategy, while two others, Ciris Energy and Next Fuel, Inc., have undertaken smaller scale field tests. Several key knowledge gaps remain that need to be addressed before MECoM strategies can be implemented commercially. Little is known about the bacterial community responsible for coal biodegradation and how these microorganisms may be stimulated to enhance microbial methanogenesis. In addition, research

  10. Becoming and remaining community health workers: Perspectives from Ethiopia and Mozambique

    PubMed Central

    Maes, Kenneth; Kalofonos, Ippolytos

    2013-01-01

    Many global health practitioners are currently reaffirming the importance of recruiting and retaining effective community health workers (CHWs) in order to achieve major public health goals. This raises policy-relevant questions about why people become and remain CHWs. This paper addresses these questions, drawing on ethnographic work in Addis Ababa, the capital of Ethiopia, between 2006 and 2009, and in Chimoio, a provincial town in central Mozambique, between 2003 and 2010. Participant observation and in-depth interviews were used to understand the life histories that lead people to become CHWs, their relationships with intended beneficiaries after becoming CHWs, and their social and economic aspirations. People in Ethiopia and Mozambique have faced similar political and economic challenges in the last few decades, involving war, structural adjustment, and food price inflation. Results suggest that these challenges, as well as the socio-moral values that people come to uphold through the example of parents and religious communities, influence why and how men and women become CHWs. Relationships with intended beneficiaries strongly influence why people remain CHWs, and why some may come to experience frustration and distress. There are complex reasons why CHWs come to seek greater compensation, including desires to escape poverty and to materially support families and other community members, a sense of deservingness given the emotional and social work involved in maintaining relationships with beneficiaries, and inequity vis-à-vis higher-salaried elites. Ethnographic work is needed to engage CHWs in the policy process, help shape new standards for CHW programs based on rooting out social and economic inequities, and develop appropriate solutions to complex CHW policy problems. PMID:23631778

  11. The Frontiers of Additive Manufacturing

    SciTech Connect

    Grote, Christopher John

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  12. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  13. Projects Work!

    ERIC Educational Resources Information Center

    Textor, Martin R.

    2005-01-01

    The great educational value of projects is emphasized by contrasting negative aspects of the life of today's children with the goals of project work. This is illustrated by a project "Shopping." It is shown what children are learning in such projects and what the advantages of project work are. Relevant topic areas, criteria for selecting a…

  14. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  15. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  16. Rekindling the spark. Five strategies to help healthcare administrators remain motivated when facing change.

    PubMed

    Veninga, R L

    1992-11-01

    Many healthcare administrators find it difficult to stay renewed in their careers as pressure mounts on an already stressful work environment. Five strategies can rekindle the spark that once made a healthcare career so attractive. Sharply focused goals are the infrastructure of a harmonious work environment. When people progress toward achieving goals, dissatisfaction with their work environment decreases. Healthcare administrators must also find solutions to problems that chip away at happiness, such as chronic understaffing or a personality conflict with a colleague. If supervisors develop positive problem-solving attitudes, employees tend to emulate them. Administrators need to personalize their leadership style. If subordinates sense their administrator is involved in their occupational struggles, their loyalty will increase and their stress will decrease. A manager needs to be surrounded by creative, energized people because upbeat people have a way of renewing one's spirits. Meaningful friendships can provide support and a fresh perspective on problems. Finally, healthcare administrators must remain steadfastly hopeful even when budgets cast red ink and the future direction of healthcare is uncharted.

  17. Description of plastic remains found in the stomach contents of the jumbo squid Dosidicus gigas landed in Ecuador during 2014.

    PubMed

    Rosas-Luis, Rigoberto

    2016-12-15

    Squids are active and opportunistic predators that feed on a wide range of prey. Their active movements in the water column and their voracity promote a high consumption of food. In the pelagic environment off Ecuador, marine pollution is characterized by plastic debris with a mainland origin, including plastics trash of fishing gears. The objective of this work was to describe the presence of plastic remains in the stomach contents of Dosidicus gigas caught off the coast of Ecuador. Results demonstrated that 12% of the stomachs contained plastic remains. These plastics were identified as multifilament of polyethylene lines and polyvinyl chloride remains. Findings of this work could be related to an increase in the discharge of solid materials in the water column, increasing the probability to be ingested by the jumbo squid.

  18. 76 FR 14058 - Notice of Inventory Completion: University of Wyoming, Anthropology Department, Human Remains...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-15

    ... National Park Service Notice of Inventory Completion: University of Wyoming, Anthropology Department, Human... University of Wyoming Anthropology Department, Human Remains Repository, Laramie, WY. The human remains were..., Anthropology Department, Human Remains Repository, professional staff in consultation with representatives...

  19. Dating human skeletal remains using 90Sr and 210Pb: case studies.

    PubMed

    Schrag, Bettina; Uldin, Tanya; Mangin, Patrice; Bochud, François; Froidevaux, Pascal

    2014-01-01

    In legal medicine, the post mortem interval (PMI) of interest covers the last 50 years. When only human skeletal remains are found, determining the PMI currently relies mostly on the experience of the forensic anthropologist, with few techniques available to help. Recently, several radiometric methods have been proposed to reveal PMI. For instance, (14)C and (90)Sr bomb pulse dating covers the last 60 years and give reliable PMI when teeth or bones are available. (232)Th series dating has also been proposed but requires a large amount of bones. In addition, (210)Pb dating is promising but is submitted to diagenesis and individual habits like smoking that must be handled carefully. Here we determine PMI on 29 cases of forensic interest using (90)Sr bomb pulse. In 12 cases, (210)Pb dating was added to narrow the PMI interval. In addition, anthropological investigations were carried out on 15 cases to confront anthropological expertise to the radiometric method. Results show that 10 of the 29 cases can be discarded as having no forensic interest (PMI>50 years) based only on the (90)Sr bomb pulse dating. For 10 other cases, the additional (210)Pb dating restricts the PMI uncertainty to a few years. In 15 cases, anthropological investigations corroborate the radiometric PMI. This study also shows that diagenesis and inter-individual difference in radionuclide uptake represent the main sources of uncertainty in the PMI determination using radiometric methods.

  20. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  1. Why Additional Presentations Help Identify a Stimulus

    ERIC Educational Resources Information Center

    Guest, Duncan; Kent, Christopher; Adelman, James S.

    2010-01-01

    Nosofsky (1983) reported that additional stimulus presentations within a trial increase discriminability in absolute identification, suggesting that each presentation creates an independent stimulus representation, but it remains unclear whether exposure duration or the formation of independent representations improves discrimination in such…

  2. Does Work Experience Actually Work?

    ERIC Educational Resources Information Center

    Field, John

    2012-01-01

    As unemployment levels rise, so education and training move into the policy spotlight. For the government, this is a very uncomfortable place to be right now. A number of large companies have withdrawn from the flagship Work Programme--under which jobseekers are invited to take up unpaid work placements of between two and eight weeks--amid…

  3. Does "Social Work Abstracts" Work?

    ERIC Educational Resources Information Center

    Holden, Gary; Barker, Kathleen; Covert-Vail, Lucinda; Rosenberg, Gary; Cohen, Stephanie A.

    2008-01-01

    Objective: The current study seeks to provide estimates of the adequacy of journal coverage in the Social Work Abstracts (SWA) database. Method: A total of 23 journals listed in the Journal Citation Reports social work category during the 1997 to 2005 period were selected for study. Issue-level coverage estimates were obtained for SWA and…

  4. Team Work.

    ERIC Educational Resources Information Center

    Frank, David

    1999-01-01

    Explains how a team cleaning approach can be cost-effective and efficient means of school maintenance. Assigning staffing responsibilities and work schedules are addressed and the advantages of using a team system are explained. (GR)

  5. Platelet additive solution - electrolytes.

    PubMed

    Azuma, Hiroshi; Hirayama, Junichi; Akino, Mitsuaki; Ikeda, Hisami

    2011-06-01

    Recent attention to solutions that replace most or all plasma in platelet concentrates, while maintaining satisfactory platelet function, is motivated by the potential of plasma reduction or depletion to mitigate various transfusion-related adverse events. This report considers the electrolytic composition of previously described platelet additive solutions, in order to draw general conclusions about what is required for platelet function and longevity. The optimal concentrations of Na(+) and Cl(-) are 69-115 mM. The presence of both K(+) and Mg(2+) in platelet suspension at nearly physiological concentrations (3-5mM and 1.5-3mM, respectively) is indispensable for good preservation capacity because both electrolytes are required to prevent platelet activation. In contrast to K(+) and Mg(2+), Ca(2+) may not be important because no free Ca(2+) is available in M-sol, which showed excellent platelet preservation capacity at less than 5% plasma concentration. The importance of bicarbonate (approximately 40 mM) can be recognized when the platelets are suspended in additive solution under less than 5% residual plasma concentration.

  6. Wood remains from the Late Triassic (Carnian) of Jordan and their paleoenvironmental implications

    NASA Astrophysics Data System (ADS)

    Abu Hamad, Abdalla M. B.; Jasper, André; Uhl, Dieter

    2014-07-01

    During field work in the Triassic of Jordan fossil wood remains have been discovered at five horizons (S-1AR-S-5AR) of the Late Triassic (Carnian) Abu Ruweis Formation in NW Jordan. In most horizons wood remains are too badly preserved to allow for a detailed xylotomic investigation. Only two horizons provided material which exhibited anatomical details: (1) in horizon S-1AR we found rare and rather small fragments of woody charcoal exhibiting cellular details (representing the first macroscopic evidence of paleo-wildfires from the Late Triassic of the Middle East), and (2) in horizon S-5AR surfaces of partly compressed (gagatized) and partly permineralized wood fragments exhibited anatomical details that could be investigated by means of scanning electron microscopy. All wood remains that allow for a detailed investigation show features typical of gymnosperms, but at the moment nothing can be said about a more specific taxonomic affinity of most of the woods, although wood from horizon S-5AR exhibits characteristics of protopinoid wood. Our data provide evidence that gymnospermous woody vegetation cover has existed in the source areas of the sediments deposited in the Abu Ruweis Formation in Jordan and that this woody vegetation occasionally experienced wildfires. This, together with lithological data, provides evidence for a seasonally dry (maybe even arid) climate during deposition of the Abu Ruweis Formation. On a larger scale our findings contribute to the very scarce current knowledge about Late Triassic wildfires on the entire continent Gondwana, from where so far only three records of macro-charcoals, as undisputed evidence of paleo-wildfires, have been published from this period.

  7. Changes in Public Prenatal Care Coverage Options for Noncitizens Since Welfare Reform: Wide State Variation Remains.

    PubMed

    Green, Tiffany; Hochhalter, Stephanie; Dereszowska, Krystyna; Sabik, Lindsay

    2016-10-01

    Before 1996, most lawfully present noncitizens were eligible for the same prenatal Medicaid benefits as U.S. citizens. However, the 1996 Personal Responsibility and Work Opportunity Reconciliation Act (PRWORA)-welfare reform-restricted benefits for certain lawful noncitizens for the first time. Welfare reform also gave states unprecedented authority to determine Medicaid eligibility. More recent federal policy changes have allowed states to cover some noncitizen pregnant women initially excluded under welfare reform. However, there are few comprehensive studies examining state implementation of these policy options. This study documents state-level trends in prenatal Medicaid and state-funded coverage options for low-income noncitizens just prior to and since welfare reform. While some states have substantially expanded prenatal coverage since PRWORA, wide variation remains. These findings have important implications for understanding the potential effects of the Affordable Care Act and Medicaid expansion on health care utilization and birth outcomes among pregnant noncitizens.

  8. Regulation of virulence in Staphylococcus aureus: molecular mechanisms and remaining puzzles

    PubMed Central

    Wang, Boyuan; Muir, Tom W.

    2016-01-01

    Summary The agr locus encodes a quorum sensing (QS) circuit required for the virulence of a spectrum of gram-positive pathogens and is, therefore, regarded as an important target for the development of chemotherapeutics. In recent years, many of the biochemical events in the Staphylococcus aureus agr circuit have been reconstituted and subject to quantitative analysis in vitro. This work, in conjunction with structural studies on several key players in the signaling circuit, has furnished mechanistic insights into the regulation and evolution of the agr quorum sensing system. Herein, we review this progress and discuss the remaining open questions in the area. We also highlight advances in the discovery of small-molecule agr modulators and how the newly available biochemical and structural information might be leveraged for the design of next generation therapeutics targeting the agr system. PMID:26971873

  9. Probability based remaining capacity estimation using data-driven and neural network model

    NASA Astrophysics Data System (ADS)

    Wang, Yujie; Yang, Duo; Zhang, Xu; Chen, Zonghai

    2016-05-01

    Since large numbers of lithium-ion batteries are composed in pack and the batteries are complex electrochemical devices, their monitoring and safety concerns are key issues for the applications of battery technology. An accurate estimation of battery remaining capacity is crucial for optimization of the vehicle control, preventing battery from over-charging and over-discharging and ensuring the safety during its service life. The remaining capacity estimation of a battery includes the estimation of state-of-charge (SOC) and state-of-energy (SOE). In this work, a probability based adaptive estimator is presented to obtain accurate and reliable estimation results for both SOC and SOE. For the SOC estimation, an n ordered RC equivalent circuit model is employed by combining an electrochemical model to obtain more accurate voltage prediction results. For the SOE estimation, a sliding window neural network model is proposed to investigate the relationship between the terminal voltage and the model inputs. To verify the accuracy and robustness of the proposed model and estimation algorithm, experiments under different dynamic operation current profiles are performed on the commercial 1665130-type lithium-ion batteries. The results illustrate that accurate and robust estimation can be obtained by the proposed method.

  10. Where are the Caribs? Ancient DNA from ceramic period human remains in the Lesser Antilles

    PubMed Central

    Mendisco, F.; Pemonge, M. H.; Leblay, E.; Romon, T.; Richard, G.; Courtaud, P.; Deguilloux, M. F.

    2015-01-01

    The identity and history of the indigenous groups who occupied the Lesser Antilles during the ceramic periods remain highly controversial. Although recent archaeological evidence has challenged hypotheses concerning the organization of human groups in this region, more biological data are needed to fully inform the discussion. Our study provides, to our knowledge, the first palaeogenetic data for Late Ceramic groups of the Guadeloupe archipelago, yielding crucial information concerning the identities of these groups. Despite the generally poor DNA preservation in the tested remains, we were able to retrieve Hypervariable Region 1 sequences from 11 individuals and mitochondrial single-nucleotide polymorphisms from 13 individuals. These novel data provide interesting preliminary results in favour of a common origin for all Saladoid Caribbean communities, i.e. the first ceramic groups of the region, as well as for a local continuity between the Saladoid and post-Saladoid groups. A combination of the genetic data obtained and several pieces of cultural evidence allows us to propose that two different groups inhabited the Guadeloupe archipelago during the Late Ceramic period, with the possible occupation of the La Désirade and Marie-Galante islands by groups affiliated with the Taíno communities. The working hypotheses proposed here appear consistent with recent archaeological evidence. PMID:25487339

  11. An adaptive remaining energy prediction approach for lithium-ion batteries in electric vehicles

    NASA Astrophysics Data System (ADS)

    Wang, Yujie; Zhang, Chenbin; Chen, Zonghai

    2016-02-01

    With the growing number of electric vehicle (EV) applications, the function of the battery management system (BMS) becomes more sophisticated. The accuracy of remaining energy estimation is critical for energy optimization and management in EVs. Therefore the state-of-energy (SoE) is defined to indicate the remaining available energy of the batteries. Considering that there are inevitable accumulated errors caused by current and voltage integral method, an adaptive SoE estimator is first established in this paper. In order to establish a reasonable battery equivalent model, based on the experimental data of the LiFePO4 battery, a data-driven model is established to describe the relationship between the open-circuit voltage (OCV) and the SoE. What is more, the forgetting factor recursive least-square (RLS) method is used for parameter identification to get accurate model parameters. Finally, in order to analyze the robustness and the accuracy of the proposed approach, different types of dynamic current profiles are conducted on the lithium-ion batteries and the performances are calculated and compared. The results indicate that the proposed approach has robust and accurate SoE estimation results under dynamic working conditions.

  12. Where are the Caribs? Ancient DNA from ceramic period human remains in the Lesser Antilles.

    PubMed

    Mendisco, F; Pemonge, M H; Leblay, E; Romon, T; Richard, G; Courtaud, P; Deguilloux, M F

    2015-01-19

    The identity and history of the indigenous groups who occupied the Lesser Antilles during the ceramic periods remain highly controversial. Although recent archaeological evidence has challenged hypotheses concerning the organization of human groups in this region, more biological data are needed to fully inform the discussion. Our study provides, to our knowledge, the first palaeogenetic data for Late Ceramic groups of the Guadeloupe archipelago, yielding crucial information concerning the identities of these groups. Despite the generally poor DNA preservation in the tested remains, we were able to retrieve Hypervariable Region 1 sequences from 11 individuals and mitochondrial single-nucleotide polymorphisms from 13 individuals. These novel data provide interesting preliminary results in favour of a common origin for all Saladoid Caribbean communities, i.e. the first ceramic groups of the region, as well as for a local continuity between the Saladoid and post-Saladoid groups. A combination of the genetic data obtained and several pieces of cultural evidence allows us to propose that two different groups inhabited the Guadeloupe archipelago during the Late Ceramic period, with the possible occupation of the La Désirade and Marie-Galante islands by groups affiliated with the Taíno communities. The working hypotheses proposed here appear consistent with recent archaeological evidence.

  13. The Replisomes Remain Spatially Proximal throughout the Cell Cycle in Bacteria

    PubMed Central

    Mangiameli, Sarah M.; Veit, Brian T.; Wiggins, Paul A.

    2017-01-01

    The positioning of the DNA replication machinery (replisome) has been the subject of several studies. Two conflicting models for replisome localization have been proposed: In the Factory Model, sister replisomes remain spatially co-localized as the replicating DNA is translocated through a stationary replication factory. In the Track Model, sister replisomes translocate independently along a stationary DNA track and the replisomes are spatially separated for the majority of the cell cycle. Here, we used time-lapse imaging to observe and quantify the position of fluorescently labeled processivity-clamp (DnaN) complexes throughout the cell cycle in two highly-divergent bacterial model organisms: Bacillus subtilis and Escherichia coli. Because DnaN is a core component of the replication machinery, its localization patterns should be an appropriate proxy for replisome positioning in general. We present automated statistical analysis of DnaN positioning in large populations, which is essential due to the high degree of cell-to-cell variation. We find that both bacteria show remarkably similar DnaN positioning, where any potential separation of the two replication forks remains below the diffraction limit throughout the majority of the replication cycle. Additionally, the localization pattern of several other core replisome components is consistent with that of DnaN. These data altogether indicate that the two replication forks remain spatially co-localized and mostly function in close proximity throughout the replication cycle. The conservation of the observed localization patterns in these highly divergent species suggests that the subcellular positioning of the replisome is a functionally critical feature of DNA replication. PMID:28114307

  14. Estimation of the pre-burning condition of human remains in forensic contexts.

    PubMed

    Gonçalves, D; Cunha, E; Thompson, T J U

    2015-09-01

    The determination of the original condition of human remains prior to burning is critical since it may facilitate the reconstruction of circumstances surrounding death in forensic cases. Although the use of heat-induced bone changes is not a completely reliable proxy for determining pre-burning conditions, it is not completely devoid of potential, as we can observe a clear difference in the occurrence of such features between the fleshed and dry bones. In order to quantify this difference and determine its true value for forensic research, the frequencies of heat-induced warping and thumbnail fractures were documented on modern cremations of cadavers from recently deceased individuals and from the cremations of skeletons previously inhumed. The effect of age, sex, time span from death to cremation, duration and temperature of combustion on those frequencies was statistically investigated. Results demonstrated that the heat-induced features were significantly more frequent in the sample of cadavers. In addition, warping was determined to be the most useful indicator of the pre-burning condition of human remains. Temperature of combustion was the only variable having a significant effect on the frequency of both features, suggesting that fluctuation of temperature, along with collagen preservation and recrystallization of the inorganic phase, is paramount for their occurrence. Both warping and thumbnail fractures may eventually be used for the estimation of the pre-burning condition of human remains in lack of other indicators, but their reliability is far from absolute. Ideally, such inference must be supported by other data such as skeletal representation, objects or defleshing marks on the bones.

  15. The Replisomes Remain Spatially Proximal throughout the Cell Cycle in Bacteria.

    PubMed

    Mangiameli, Sarah M; Veit, Brian T; Merrikh, Houra; Wiggins, Paul A

    2017-01-01

    The positioning of the DNA replication machinery (replisome) has been the subject of several studies. Two conflicting models for replisome localization have been proposed: In the Factory Model, sister replisomes remain spatially co-localized as the replicating DNA is translocated through a stationary replication factory. In the Track Model, sister replisomes translocate independently along a stationary DNA track and the replisomes are spatially separated for the majority of the cell cycle. Here, we used time-lapse imaging to observe and quantify the position of fluorescently labeled processivity-clamp (DnaN) complexes throughout the cell cycle in two highly-divergent bacterial model organisms: Bacillus subtilis and Escherichia coli. Because DnaN is a core component of the replication machinery, its localization patterns should be an appropriate proxy for replisome positioning in general. We present automated statistical analysis of DnaN positioning in large populations, which is essential due to the high degree of cell-to-cell variation. We find that both bacteria show remarkably similar DnaN positioning, where any potential separation of the two replication forks remains below the diffraction limit throughout the majority of the replication cycle. Additionally, the localization pattern of several other core replisome components is consistent with that of DnaN. These data altogether indicate that the two replication forks remain spatially co-localized and mostly function in close proximity throughout the replication cycle. The conservation of the observed localization patterns in these highly divergent species suggests that the subcellular positioning of the replisome is a functionally critical feature of DNA replication.

  16. Multi-heat addition turbine engine

    NASA Technical Reports Server (NTRS)

    Franciscus, Leo C. (Inventor); Brabbs, Theodore A. (Inventor)

    1993-01-01

    A multi-heat addition turbine engine (MHATE) incorporates a plurality of heat addition devices to transfer energy to air and a plurality of turbines to extract energy from the air while converting it to work. The MHATE provides dry power and lower fuel consumption or lower combustor exit temperatures.

  17. High-performance vertical Si PiN diode by hole remaining mechanism

    NASA Astrophysics Data System (ADS)

    Tsukuda, Masanori; Baba, Akiyoshi; Shiba, Yuji; Omura, Ichiro

    2017-03-01

    A novel diode with a unique trench shape is predicted by TCAD simulation to have high performance. The novel 600 V vertical PiN diode with hole pockets by the Bosch deep trench process shows a better trade-off curve between reverse recovery loss and forward voltage. The reverse recovery loss is reduced by half. In addition, the active chip size of the novel diode is reduced to two-thirds that of the conventional PiN diode in the same forward voltage. Thanks to the hole pockets with an electric field in the diagonal direction, the remaining hole suppresses the surge voltage with noise for high performance. In this paper, we specially focus on the analysis of phenomenon and the noise suppression mechanism during reverse recovery. The novel diode structure is a strong candidate when developing the fabrication process after silicon trench etching is established.

  18. Embryonic stem cells remain highly pluripotent following long term expansion as aggregates in suspension bioreactors.

    PubMed

    zur Nieden, Nicole I; Cormier, Jaymi T; Rancourt, Derrick E; Kallos, Michael S

    2007-05-01

    Increasing attention has been drawn towards pluripotent embryonic stem cells (ESCs) and their potential use as the primary material in various tissue engineering applications. Successful clinical implementation of this technology would require a quality controlled reproducible culture system for the expansion of the cells to be used in the generation of functional tissues. Recently, we showed that suspension bioreactors could be used in the regulated large-scale expansion of highly pluripotent murine ESCs. The current study illustrates that these bioreactor protocols can be adapted for long term culture and that murine ESC cultures remain highly undifferentiated, when serially passaged in suspension bioreactors for extended periods. Flow cytometry analysis and gene expression profiles of several pluripotency markers, in addition to colony and embryoid body (EB) formation tests were conducted at the start and end of the experiment and all showed that the ESC cultures remained highly undifferentiated over extended culture time in suspension. In vivo teratoma formation and in vitro differentiation into neural, cardiomyocyte, osteoblast and chondrocyte lineages, performed at the end of the long term culture, further supported the presence of functional and undifferentiated ESCs in the expanded population. Overall, this system enables the controlled expansion of highly pluripotent murine ESC populations.

  19. Identification of Giovanni Battista Morgagni remains following historical, anthropological, and molecular studies.

    PubMed

    Zanatta, Alberto; Zampieri, Fabio; Zampieri, Girolamo; Giuliodori, Alice; Thiene, Gaetano; Caenazzo, Luciana

    2014-11-01

    Morgagni died on December 5, 1771, 89 years old, and was buried in Saint Maxim Church in Padua, where his wife and five of his 15 children, four daughters, and one son were already buried. In 1868 and 1900, the tomb was opened to identify Morgagni. Among the remains of several adult individuals, two skulls considered of very old persons were identified and replaced in an earthenware jar inside the sepulcher. In 2011, we opened the tomb and found the remains described during the first two identifications, but additionally, we found the skulls fragments of three very young individuals which could have been Morgagni's children. An anthropological analysis confirmed that one of the skulls inside the earthenware jar belonged to the oldest individuals ("senilis") between those found in the tomb. A genetic analysis proved a kinship between this skull and the fragments of young individuals (one male and two females), supporting the hypothesis that they were Morgagni and his children. In conclusion, thanks to the interaction between historical studies, anthropological research, and molecular analysis that reinforce each other, we can assume that the skull is Giovanni Battista Morgagni's and that the series of skull fragments are from his children who were buried together with their parents.

  20. Additive composition, for gasoline

    SciTech Connect

    Vataru, M.

    1989-01-10

    An admixture is described that comprises Diesel fuel and an additive composition added thereto which is between about 0.05 to about 2.0 percent by weight of the fuel, the composition comprising: (a) between about 0.05 and 25% relative weight parts of an organic peroxide, and (b) between about 0.1 and 25% relative weight parts of detergent selected from the component group that consists of: (i) fatty amines; (ii) ethoxylated and propoxylated derivatives of fatty amines; (iii) fatty diamines; (iv) fatty imidazlines; (v) polymeric amines and derivatives thereof; (vi) combination of one or more of the (i) through (v) components with carboxylic acid or acids having from three to forth carbon atoms, (c) from about 99.0 to about 50% by weight of a hydrocarbon solvent.

  1. Teardrop bladder: additional considerations

    SciTech Connect

    Wechsler, R.J.; Brennan, R.E.

    1982-07-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB.

  2. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  3. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  4. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  5. Diagnostics and Prognostics Tools for Assessing Remaining Useful Life of Nuclear Power Plant Materials

    SciTech Connect

    Ramuhalli, Pradeep; Griffin, Jeffrey W.; Fricke, Jacob M.; Henager, Charles H.; Dixit, Mukul; Bond, Leonard J.

    2011-12-01

    stainless steels, and degradation mechanisms common to an LWR operating environment in these materials. The use of micromagnetic measurements to assess early stages of degradation will be discussed. The measurements will be used, along with models of degradation accumulation over time, to assess the remaining useful life using a Bayesian prognostic algorithm. The primary advantage of a Bayesian approach is the ability to incorporate a priori information to constrain the solution of the problem and mitigate uncertainties in the measurements. Further, a Bayesian approach enables the incorporation of additional information as it becomes available, which can be used to update, and refine, the RUL estimates. Results of the proposed techniques on experimentally acquired measurements will be presented in the full paper.

  6. Additive lattice kirigami.

    PubMed

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  7. Ceramics with Different Additives

    NASA Astrophysics Data System (ADS)

    Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

    2014-09-01

    Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

  8. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  9. GPR investigation to allocate the archaeological remains in Mut temple, Luxor, Upper Egypt

    NASA Astrophysics Data System (ADS)

    Atya, M. A.; AL Khateeb, S. O.; Ahmed, S. B.; Musa, M. F.; Gaballa, M.; Abbas, A. M.; Shaaban, F. F.; Hafez, M. A.

    2012-06-01

    GPR investigation has been conducted on Mut temple; to the south portion of Al-Karnak temple at the eastern bank of Luxor city. Within the survey, the GPR SIR system-10A has been used connected to 100/500 MHz antenna. The present work is oriented to allocate the buried Archaeological ruins at the site, and also to evaluate the archaeological significance of the artifacts in concern to the hydro-situation. The survey is composed of three data sets; the first set (A) includes three GPR profiles located inside the temple palisade at the western bank of the holy lake, the second set (B) includes four profiles distributed on the yard between Mute and Al Karnak temples, and the third set (C) includes three profiles oriented to study the EW Sphinx Avenue front of Mute temple. The measured GPR data has been processed and visualized in different ways to show the infra-content of the artifacts in the buried subsurface of the temple. Furthermore, intensive mutual work and discussion with the local inspectorate at Luxor about the results would lead to detect the zones of possible findings and, as much as possible, to define their identities. A series of sectional GPR records, time slices, maps, and 3D graphs are introduced to represent the remains of Mut temple and its infrastructure.

  10. Biotechnology Works!

    ERIC Educational Resources Information Center

    Cohen, Libby G.; Spenciner, Loraine

    There have been few initiatives addressing the improvement of science education for students with disabilities. Funded by the National Science Foundation, Biotechnology Works is a summer institute in immunology and genetics for students with disabilities, high school science teachers, and high school counselors. During the 1998 summer session,…

  11. Working Together

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2010-01-01

    Students need space to gather, share ideas, talk, develop common understanding and work to create greater knowledge. This focus on collaboration has put a strain on group study spaces. Students need to collaborate spontaneously, and scheduling time in a study room is not conducive to spur-of-the-moment collaboration. At many education…

  12. Working Knowledge.

    ERIC Educational Resources Information Center

    Beckett, David

    The resurgence of "lifelong learning" has renewed consideration of the nature of "working knowledge." Lifelong learning has many aspects, including construction and distribution of individuals' very self-hood, educational institutions' role in capturing informal experiences, and the juggling required between family and…

  13. Wetlands Work

    ERIC Educational Resources Information Center

    Messina, Linda; Blanchard, Pamela Borne

    2004-01-01

    This article describes how a biology teacher's search for a cross-curricular project in science, math, history, and environmental science, that would help her students connect what they were learning in the classroom to their everyday life, resulted in an ongoing stewardship project. Working together with the Louisiana Sea Grant College Program…

  14. Work Simplification

    ERIC Educational Resources Information Center

    Ross, Lynne

    1970-01-01

    Excerpts from a talk by Mrs. Ross at the 23rd annual convention of the American School Food Service Association in Detroit, August 5, 1969. A book on work simplification by Mrs. Ross will be available in June from the Iowa State University Press, Ames, Iowa. (Editor)

  15. Imaging of Archaeological Remains at Barcombe Roman Villa using Microwave Tomographic Depictions of Ground Penetrating Radar Data

    NASA Astrophysics Data System (ADS)

    Soldovieri, F.; Utsi, E.; Alani, A.; Persico, R.

    2012-04-01

    The site of the Barcombe Romano-British villa lies in a field on the perimeter of Barcombe village in East Sussex, England. The site came to the attention of the Mid Sussex Field Archaeological Team (MSFAT) and the University College London Field Archaeological Unit (UCL, subsequently replaced by the Centre for Continuing Education of the University of Sussex, CCE) because it was in danger of disappearing altogether without being adequately recorded [1]. In common with many other UK sites of the period, the villa had been extensively robbed out in the centuries following its demise in order to provide building material for the adjacent village and its associated farms, a common problem with Romano-British sites in the UK [2]. In addition, the site is positioned on the ridge of a field in agricultural use and has therefore been extensively ploughed out. As a result, the archaeological evidence was sparse and the little that remained was being rapidly eroded. In April 2001, a Ground Penetrating Radar (GPR) survey was carried out jointly by the Department of Engineering, Portsmouth and Utsi Electronics Ltd on behalf of the archaeological team in order to investigate the possibility of mapping both the villa and earlier prehistoric remains on the same ridge. Using a 40m by 60m grid laid out by the archaeological team, a Groundvue 1, with antennas of central frequency 400MHz, was used to survey along a series of parallel transects at intervals of 50cm. The sampling interval along the line of survey was 5cm and probing was carried out to 40ns. The results of the GPR survey, including a comparison with the evidence from the resistivity work, were published in 2002 [3]. The original GPR data were processed (using the ReflexW package) by applying background removal, adding time based gain, averaging over 2 traces in order to reduce noise resulting from the relative movement of the antennas across the ploughed field and finally applying a Bandpass Butterworth filter of 200

  16. Marathon works

    PubMed Central

    Orrantia, Eliseo

    2005-01-01

    PROBLEM BEING ADDRESSED Medical care in rural Canada has long been hampered by insufficient numbers of physicians. How can a rural community’s physicians change the local medical culture and create a new approach to sustaining their practice? OBJECTIVE OF PROGRAM To create a sustainable, collegial family practice group and address one rural community’s chronically underserviced health care needs. PROGRAM DESCRIPTION Elements important to physicians’ well-being were incorporated into the health care group’s functioning to enhance retention and recruitment. The intentional development of a consensus-based approach to decision making has created a supportive team of physicians. Ongoing communication is kept up through regular meetings, retreats, and a Web-based discussion board. Individual physicians retain control of their hours worked each year and their schedules. A novel obstetric call system was introduced to help make schedules more predictable. An internal governance agreement on an alternative payment plan supports varied work schedules, recognizes and funds non-clinical medical work, and pays group members for undertaking health-related projects. CONCLUSION This approach has helped maintain a stable number of physicians in Marathon, Ont, and has increased the number of health care services delivered to the community. PMID:16190174

  17. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  18. The Liang Bua faunal remains: a 95k.yr. sequence from Flores, East Indonesia.

    PubMed

    van den Bergh, G D; Meijer, H J M; Due Awe, Rokhus; Morwood, M J; Szabó, K; van den Hoek Ostende, L W; Sutikna, T; Saptomo, E W; Piper, P J; Dobney, K M

    2009-11-01

    Excavations at Liang Bua, a limestone cave on the island of Flores, East Indonesia, have yielded a well-dated archaeological and faunal sequence spanning the last 95k.yr., major climatic fluctuations, and two human species -H. floresiensis from 95 to 17k.yr.(1), and modern humans from 11k.yr. to the present. The faunal assemblage comprises well-preserved mammal, bird, reptile and mollusc remains, including examples of island gigantism in small mammals and the dwarfing of large taxa. Together with evidence from Early-Middle Pleistocene sites in the Soa Basin, it confirms the long-term isolation, impoverishment, and phylogenetic continuity of the Flores faunal community. The accumulation of Stegodon and Komodo dragon remains at the site in the Pleistocene is attributed to Homo floresiensis, while predatory birds, including an extinct species of owl, were largely responsible for the accumulation of the small vertebrates. The disappearance from the sequence of the two large-bodied, endemic mammals, Stegodon florensis insularis and Homo floresiensis, was associated with a volcanic eruption at 17 ka and precedes the earliest evidence for modern humans, who initiated use of mollusc and shell working, and began to introduce a range of exotic animals to the island. Faunal introductions during the Holocene included the Sulawesi warty pig (Sus celebensis) at about 7ka, followed by the Eurasian pig (Sus scrofa), Long-tailed macaque, Javanese porcupine, and Masked palm civet at about 4ka, and cattle, deer, and horse - possibly by the Portuguese within historic times. The Holocene sequence at the site also documents local faunal extinctions - a result of accelerating human population growth, habitat loss, and over-exploitation.

  19. Human remains sold to the highest bidder! A snapshot of the buying and selling of human skeletal remains on eBay, an Internet auction site.

    PubMed

    Huxley, Angie K; Finnegan, Michael

    2004-01-01

    Internet auction sites have become increasingly popular, with diverse items up for sale to the public worldwide. The purposes of this paper are to inform the forensic community that human skeletal remains, old and new, are for sale on the eBay internet auction site, and to advise forensic scientists that eBay does not use a forensic anthropologist to assess photographs of these materials. Over the last few years, this website was "surfed," with numerous auctions during this period. After contacting eBay by email, representatives responded that they adhere to Native American Grave Protection and Repatriation Act (NAGPRA) and that their website indicates that auctions must state that sale of human remains is for instructional purposes only. Based on the photographs, the remains appear to be of prehistoric and modern origin. An unfortunate consequence of such sale may generate interest in stealing remains from graves, mortuaries, hospitals, or county morgues worldwide.

  20. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  1. An Application of USLE and SEDD Models to Estimate the Remaining Service Life of Kartalkaya Dam

    NASA Astrophysics Data System (ADS)

    Tanyas, H.

    2013-12-01

    The water requirement of today's world is such a hot topic that countries all over the world are severely searching for different alternatives to keep pace with increasing water demand. However, when the increasing population and water demand are considered, management of existing water resources is arguably more important than searching for additional resources. The construction and utilization of engineering structures (e.g., dams) is often used in water resource management, however their service life are often not considered or properly planned in advance. As a consequence, because of these unplanned applications, the maximum potential water supply cannot be reached in watersheds, in other words, water sources are wasted. This research demonstrates that it is possible to forecast the service life of a dam more properly and also identifies some precautions regarding the potential sources that might cause the shortened service life. Kartalkaya Dam located in Turkey has been operating since 1972, was constructed with the aims of irrigation and flood prevention and is near the end of its service life. At this point, the first objective of this study was conducted, which determines the remaining service life of the dam with reference to the amount of material transported through the corresponding catchment area and the amount accumulated in the reservoir. This was accomplished using the Universal Soil Loss Equation simulated in ArcGIS. The amount of eroded material per year for each 25x25 m cell of study area was determined and as a consequence, the areas which are more prone to be eroded were defined. The ongoing second stage of the study, applies the sediment delivery distributed (SEDD) model and calculates the amount of material deposited during the operation period of the dam and is used to forecast the remaining service life of the Kartalkaya Dam.

  2. The Neandertals of northeastern Iberia: new remains from the Cova del Gegant (Sitges, Barcelona).

    PubMed

    Quam, Rolf; Sanz, Montserrat; Daura, Joan; Robson Brown, Kate; García-González, Rebeca; Rodríguez, Laura; Dawson, Heidi; Rodríguez, Rosa Flor; Gómez, Sandra; Villaescusa, Lucía; Rubio, Ángel; Yagüe, Almudena; Ortega Martínez, María Cruz; Fullola, Josep Maria; Zilhão, João; Arsuaga, Juan Luis

    2015-04-01

    The present study describes a new juvenile hominin mandible and teeth and a new juvenile humerus from level V of the GP2 gallery of Cova del Gegant (Spain). The mandible (Gegant-5) preserves a portion of the right mandibular corpus from the M1 distally to the socket for the dc mesially, and the age at death is estimated as 4.5-5.0 years. Gegant-5 shows a single mental foramen located under the dm1/dm2 interdental septum, a relatively posterior placement compared with recent hominins of a similar developmental age. The mental foramen in Gegant-5 is also placed within the lower half of the mandibular corpus, as in the previously described late adolescent/adult mandible (Gegant-1) from this same Middle Paleolithic site. The Gegant-5 canine shows pronounced marginal ridges, a distal accessory ridge, and a pronounced distolingual tubercle. The P3 shows a lingually-displaced protoconid cusp tip and a distal accessory ridge. The P4 shows a slightly asymmetrical crown outline, a continuous transverse crest, a mesially placed metaconid cusp tip, a slight distal accessory ridge, and an accessory lingual cusp. The M1 shows a Y5 pattern of cusp contact and a well-developed and deep anterior fovea bounded posteriorly by a continuous midtrigonid crest. Gegant-4 is the distal portion of a left humerus from a juvenile estimated to be between 5 and 7 years old at death. The specimen shows thick cortical bone. Although fragmentary, the constellation of morphological and metric features indicates Neandertal affinities for these specimens. Their spatial proximity at the site and similar ages at death suggest these remains may represent a single individual. The addition of these new specimens brings the total number of Neandertal remains from the Cova del Gegant to five, and this site documents the clearest evidence for Neandertal fossils associated with Middle Paleolithic stone tools in this region of the Iberian Peninsula.

  3. Soil stratigraphy of charcoal kiln remains (CKR) in the Litchfield Hills, CT, USA

    NASA Astrophysics Data System (ADS)

    Raab, Thomas; Hirsch, Florian; Ouimet, Will; Dethier, David

    2016-04-01

    Charcoal kiln relicts (CKRs) are small anthropogenic landforms that are often found in historic mining areas. CKRs have not been a big research topic yet but mainly were studied as by-products of archaeological excavations. In the last years newly available and very accurate Digital Elevation Models (DEMs) based on high-resolution Airborne Laser Scanning (ALS) data have been used to identify these archaeological remains. In addition, findings of several thousands CKRs in the North German Lowland have increased the awareness that historical charcoal production may significantly contribute to Late Holocene landscape change. Besides the archaeological aspect of CKRs, potential impacts of charcoal burning on the ecology of modern soil landscapes and ecosystem processes must be considered. A relatively high density of CKRs is found in the Litchfield Hills nearby the town of West Cornwall, Litchfield County, CT, USA. The CKRs are especially well preserved on slopes of the tributary valleys of the Housatonic River and form little, circular ramparts with diameters normally less than ten meters. First, rough field surveys in Litchfield County in spring 2015 have suggested differences between soils inside and outside the CKR. Soils on the CKR seem to have relatively deep humus-rich and charcoal containing topsoils whereas the topsoils outside the CKR appear typically thinner and less rich in humus. More thorough investigations have been started in autumn 2015 to prove the hypothesis that properties, distribution and development of soils are controlled by archaeological remains of historical charcoal burning. We present preliminary results from our field studies conducted in October 2015. The stratigraphy and the extent of the 26 CKRs were studied using a sedimentological-pedological approach by coring and trenching. Our results indicate that in Litchfield County the CKRs were used twice and in quick succession. Before the second reuse, the rim of the platform was stabilized

  4. A new application for food customization with additive manufacturing technologies

    NASA Astrophysics Data System (ADS)

    Serenó, L.; Vallicrosa, G.; Delgado, J.; Ciurana, J.

    2012-04-01

    Additive Manufacturing (AM) technologies have emerged as a freeform approach capable of producing almost any complete three dimensional (3D) objects from computer-aided design (CAD) data by successively adding material layer by layer. Despite the broad range of possibilities, commercial AM technologies remain complex and expensive, making them suitable only for niche applications. The developments of the Fab@Home system as an open AM technology discovered a new range of possibilities of processing different materials such as edible products. The main objective of this work is to analyze and optimize the manufacturing capacity of this system when producing 3D edible objects. A new heated syringe deposition tool was developed and several process parameters were optimized to adapt this technology to consumers' needs. The results revealed in this study show the potential of this system to produce customized edible objects without qualified personnel knowledge, therefore saving manufacturing costs compared to traditional technologies.

  5. Neural Anatomy of Primary Visual Cortex Limits Visual Working Memory.

    PubMed

    Bergmann, Johanna; Genç, Erhan; Kohler, Axel; Singer, Wolf; Pearson, Joel

    2016-01-01

    Despite the immense processing power of the human brain, working memory storage is severely limited, and the neuroanatomical basis of these limitations has remained elusive. Here, we show that the stable storage limits of visual working memory for over 9 s are bound by the precise gray matter volume of primary visual cortex (V1), defined by fMRI retinotopic mapping. Individuals with a bigger V1 tended to have greater visual working memory storage. This relationship was present independently for both surface size and thickness of V1 but absent in V2, V3 and for non-visual working memory measures. Additional whole-brain analyses confirmed the specificity of the relationship to V1. Our findings indicate that the size of primary visual cortex plays a critical role in limiting what we can hold in mind, acting like a gatekeeper in constraining the richness of working mental function.

  6. 75 FR 5108 - Notice of Inventory Completion: University of Wyoming, Anthropology Department, Human Remains...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-01

    ... National Park Service Notice of Inventory Completion: University of Wyoming, Anthropology Department, Human... possession and control of the University of Wyoming, Anthropology Department, Human Remains Repository... notice. A detailed assessment of the human remains was made by University of Wyoming,...

  7. The "working" of working memory.

    PubMed

    Miller, Earl K

    2013-12-01

    This review examines the evidence for a neurobiological explanation of executive functions of working memory. We suggest that executive control stems from information about task rules acquired by mixed selective, adaptive coding, multifunctional neurons in the prefrontal cortex. The output of these neurons dynamically links the cortex-wide networks needed to complete the task. The linking may occur via synchronizing of neural rhythms, which may explain why we have a limited capacity for simultaneous thought.

  8. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or...

  9. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or...

  10. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or...

  11. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or...

  12. 77 FR 59659 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-28

    ... National Park Service Notice of Inventory Completion for Native American Human Remains and Associated....S.C. 3003, of the completion of an inventory of human remains and associated funerary objects in the control of San Francisco State University, San Francisco, CA. The ] human remains were removed...

  13. 43 CFR 10.11 - Disposition of culturally unidentifiable human remains.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... human remains. 10.11 Section 10.11 Public Lands: Interior Office of the Secretary of the Interior NATIVE AMERICAN GRAVES PROTECTION AND REPATRIATION REGULATIONS Human Remains, Funerary Objects, Sacred Objects, or... unidentifiable human remains. (a) General. This section implements section 8(c)(5) of the Act and applies...

  14. 43 CFR 10.11 - Disposition of culturally unidentifiable human remains.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... human remains. 10.11 Section 10.11 Public Lands: Interior Office of the Secretary of the Interior NATIVE AMERICAN GRAVES PROTECTION AND REPATRIATION REGULATIONS Human Remains, Funerary Objects, Sacred Objects, or... unidentifiable human remains. (a) General. This section implements section 8(c)(5) of the Act and applies...

  15. 32 CFR 776.71 - Requirement to remain in good standing with licensing authorities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Requirement to remain in good standing with... SUPERVISION OF THE JUDGE ADVOCATE GENERAL Rules of Professional Conduct § 776.71 Requirement to remain in good standing with licensing authorities. (a) Requirement to remain in good standing with state...

  16. 32 CFR 776.71 - Requirement to remain in good standing with licensing authorities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Requirement to remain in good standing with... SUPERVISION OF THE JUDGE ADVOCATE GENERAL Rules of Professional Conduct § 776.71 Requirement to remain in good standing with licensing authorities. (a) Requirement to remain in good standing with state...

  17. 32 CFR 776.71 - Requirement to remain in good standing with licensing authorities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 5 2014-07-01 2014-07-01 false Requirement to remain in good standing with... SUPERVISION OF THE JUDGE ADVOCATE GENERAL Rules of Professional Conduct § 776.71 Requirement to remain in good standing with licensing authorities. (a) Requirement to remain in good standing with state...

  18. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or...

  19. [Intolerance to food additives: an update].

    PubMed

    Cardinale, F; Mangini, F; Berardi, M; Sterpeta Loffredo, M; Chinellato, I; Dellino, A; Cristofori, F; Di Domenico, F; Mastrototaro, M F; Cappiello, A; Centoducati, T; Carella, F; Armenio, L

    2008-12-01

    Contrary to common believing, the prevalence of the intolerance to food additives in the general population is rather low. Nowadays many doubts persist with regard both to the pathogenetic mechanisms and to the clinical and diagnostic aspects in this field. Symptoms due to, or exacerbated from, food additives usually involve non-IgE-mediate mechanisms (pseudo-allergic reactions, PAR) and are usually less severe of those induced by food allergy. The most frequent clinical feature of the intolerance to food additives still remains the urticaria-angioedema syndrome, although these substances are really involved only in a minority of patients. Other possible clinical features include anaphylaxis, atopic eczema, behaviour disturbances, asthma and non-allergic rhinitis. The diagnostic approach consists in diary cards, reporting symptoms and food habits, elimination diet and double blinded placebo-controlled oral challenge with suspected additives. However, such procedure still remains poorly standardized and numerous uncertainties persist with regard to optimal conditions for performing and interpret the challenge results. The therapeutic approach consists in the exclusion of foods and products containing the additive involved, and, in patients not compliant to the diet, in treatment with symptomatic drugs.

  20. Subfossil remains of Pediastrum - a tool to obtain palaeolimnological information parallel to pollen analysis?

    NASA Astrophysics Data System (ADS)

    Turner, F.; Zhu, L.; Ma, Q.; Peng, P.; Lü, X.

    2014-12-01

    It has been a long-time goal of palynologists to obtain additionally palaeoenvironmental information by the study of Quaternary non-pollen-palynomorphs (NPPs) in pollen slides. As a group of NPPs, subfossil remains of green algae of the genus Pediastrum (fam. Hydrodictyaceae) are frequently found in lake sediments and withstand the palynological standard preparation methods. Determination of Pediastrum taxa to subspecies level is relatively easy with a standard light microscope. Very few studies, however, have used them as palaeolimnological indicators and the knowledge on recent distribution and ecology of many taxa is limited. Introducing new data from Northwestern Europe and the Tibetan Plateau, we show that analysis of subfossil Pediastrum assemblages can reveal valuable information on limnological and climate parameters. Shifts in taxonomic composition of Pediastrum assemblages from lake sediments in northern Germany are shown to strongly reflect the Northern Atlantic Late Glacial climate oscillations. In contrast to previous studies that recognized trophic state as the main driver of change in Pediastrum species composition, we identify climate shifts and related factors as the major drivers of community change. Water depth and trophic state probably acted as secondary factors only. Ongoing research compares the composition of Pediastrum assemblages in surface sediments of Tibetan lakes to environmental variables. While Pediastrum algae are shown to be a part of phytoplankton communities in freshwater to mesosaline lakes, shifts in species composition along the salinity gradient indicate the possible use of the algae group as palaeobioindicator for past humidity changes on the Tibetan Plateau. Additionally, investigations on the relation between water depth and the Pediastrum species composition in lake Taro Co (4575 m asl.) are presented. Our results suggest this algae group has great potential for enabling environmental inferences.

  1. Evolution of working memory

    PubMed Central

    Carruthers, Peter

    2013-01-01

    Working memory (WM) is fundamental to many aspects of human life, including learning, speech and text comprehension, prospection and future planning, and explicit “system 2” forms of reasoning, as well as overlapping heavily with fluid general intelligence. WM has been intensively studied for many decades, and there is a growing consensus about its nature, its components, and its signature limits. Remarkably, given its central importance in human life, there has been very little comparative investigation of WM abilities across species. Consequently, much remains unknown about the evolution of this important human capacity. Some questions can be tentatively answered from the existing comparative literature. Even studies that were not intended to do so can nonetheless shed light on the WM capacities of nonhuman animals. However, many questions remain. PMID:23754428

  2. All in the Family: Work-Family Enrichment and Crossover Among Farm Couples.

    PubMed

    Sprung, Justin M; Jex, Steve M

    2016-04-21

    This study expands upon the contextualization of the work-family interface by examining positive work-family experiences within the farming industry. Both individual and crossover effects were examined among a sample of 217 married farm couples. Results demonstrated multiple significant relationships between self-reported attitudes, work-family enrichment, and health outcomes. In addition, crossover effects reveal the importance of individual attitudes (husband work engagement and wife farm satisfaction) for spousal work-family enrichment and health outcomes. Furthermore, individual work-family enrichment was positively related to spousal psychological health and negatively related to spousal physical symptoms. Many of these findings remained significant after controlling for work-family conflict. Overall, our results suggest the potential beneficial impact of the integrated work-family dynamic associated with the farming profession for positive work-family experiences. Implications of these findings, as well as directions for future research, are discussed. (PsycINFO Database Record

  3. Home Health Agency Work Environments and Hospitalizations

    PubMed Central

    Flynn, Linda; Lake, Eileen T.; Aiken, Linda H.

    2014-01-01

    Background: An important goal of home health care is to assist patients to remain in community living arrangements. Yet home care often fails to prevent hospitalizations and to facilitate discharges to community living, thus putting patients at risk of additional health challenges and increasing care costs. Objectives: To determine the relationship between home health agency work environments and agency-level rates of acute hospitalization and discharges to community living. Methods and Design: Analysis of linked Center for Medicare and Medicaid Services Home Health Compare data and nurse survey data from 118 home health agencies. Robust regression models were used to estimate the effect of work environment ratings on between-agency variation in rates of acute hospitalization and community discharge. Results: Home health agencies with good work environments had lower rates of acute hospitalizations and higher rates of patient discharges to community living arrangements compared with home health agencies with poor work environments. Conclusion: Improved work environments in home health agencies hold promise for optimizing patient outcomes and reducing use of expensive hospital and institutional care. PMID:25215647

  4. Addition of polyhaloalkanes to 1-vinylsilatrane

    SciTech Connect

    Voronkov, M.G.; Petukhov, L.P.; Adamovich, S.N.; Baryshok, V.P.; Rakhlin, V.I.; Shterenberg, B.Z.; Mirskov, R.G.

    1987-07-20

    In their previous work, they showed that the homolytic reaction of 1-allylsilatrane with polyhaloalkanes gives 1-halosilatranes. In the present work, they discovered the addition of polyhaloalkanes to 1-vinylsilatranes both upon photochemical initiation and in the presence of peroxides. The ease of this reaction, its regiospecificity and high product yields permit them to recommend it as a preparative method for the synthesis of 1-polyhaloalkylsilatranes.

  5. A novel health indicator for on-line lithium-ion batteries remaining useful life prediction

    NASA Astrophysics Data System (ADS)

    Zhou, Yapeng; Huang, Miaohua; Chen, Yupu; Tao, Ye

    2016-07-01

    Prediction of lithium-ion batteries remaining useful life (RUL) plays an important role in an intelligent battery management system. The capacity and internal resistance are often used as the batteries health indicator (HI) for quantifying degradation and predicting RUL. However, on-line measurement of capacity and internal resistance are hardly realizable due to the not fully charged and discharged condition and the extremely expensive cost, respectively. Therefore, there is a great need to find an optional way to deal with this plight. In this work, a novel HI is extracted from the operating parameters of lithium-ion batteries for degradation modeling and RUL prediction. Moreover, Box-Cox transformation is employed to improve HI performance. Then Pearson and Spearman correlation analyses are utilized to evaluate the similarity between real capacity and the estimated capacity derived from the HI. Next, both simple statistical regression technique and optimized relevance vector machine are employed to predict the RUL based on the presented HI. The correlation analyses and prediction results show the efficiency and effectiveness of the proposed HI for battery degradation modeling and RUL prediction.

  6. Case study: ancient DNA recovered from pleistocene-age remains of a Florida armadillo.

    PubMed

    Letts, Brandon; Shapiro, Beth

    2012-01-01

    Warm, humid regions are not ideal for long-term DNA preservation. Consequently, little ancient DNA research has been carried out involving taxa that lived in, for example, tropical and subtropical regions. Those studies that have isolated ancient DNA from warm environments have mostly been limited to the most recent several thousand years. Here, we discuss an ancient DNA experiment in which we attempt to amplify mitochondrial DNA from remains of armadillo, glyptodont, and pampathere from sites in Florida, USA, all believed to be around 10,000-12,000 years old. We were successful in recovering DNA from only one of these samples. However, based on the amount and distribution of DNA damage, the ancient DNA recovered was well-preserved despite the age and preservation environment. In this case study chapter, we discuss the experimental procedure we used to characterize the DNA from the Floridian samples, focusing on challenges of working with ancient specimens from warm environments and steps taken to confirm the authenticity of the recovered sequence.

  7. Moving SDM forward in Canada: milestones, public involvement, and barriers that remain.

    PubMed

    Légaré, France; Stacey, Dawn; Forest, Pierre-Gerlier; Coutu, Marie-France

    2011-01-01

    Canada's approach to shared decision making (SDM) is as disparate as its healthcare system; a conglomerate of 14 public plans at various administrative levels. SDM initiatives are taking place in different pockets of the country and are in different stages of development. The most advanced provincial initiative is occurring in Saskatchewan, where in 2010 the provincial government prepare to introduce patient decision aids into certain surgical specialties. With regard to decision support tools for patients, perhaps the most active entity is the Patient Decision Aids Research Group in Ottawa, Ontario. This group maintains a public inventory of decision aids ranked according to International Patient Decision Aid Standards and has developed the generic Ottawa Personal Decision Guide, as well as a toolkit for integrating decision aids in clinical practice. All of these tools are publicly available free of charge. Professional interest in SDM in Canada is not yet widespread, but Canada's principal health research funding agency is sponsoring several important SDM projects. Researchers from institutions across the country are promoting SDM through continuing professional development programs and other interventions in fields as varied as primary care, dietary medicine and workplace rehabilitation. Still, the future of SDM in Canada remains uncertain. Canada's provincially based structure obliges promoters to work with each province separately, and the recent growth of private healthcare risks dissipating efforts to implement SDM.

  8. Oxygen isotope analyses of mammal bone remains from Holocene sites in European Russia: palaeoclimatic implications

    NASA Astrophysics Data System (ADS)

    Iacumin, P.; Nikolaev, V.; Ramigni, M.; Longinelli, A.

    2004-01-01

    A set of 27 samples of human skeletal remains, collected at 3 different sites in European Russia, was measured for the oxygen isotope composition of their phosphate ( δ18Op). The age of these samples (cultural age derived from archaeological evidence) ranges from about 5000 to about 500 years BP. The samples come from the steppe Volga-Don area of southern European Russia. The δ18O values of palaeoenvironmental water ( δ18Ow) were calculated from the δ18Op of fossil samples by means of the isotope equations calibrated on modern specimens. The results obtained and the results from other sets of data from European Russia reported elsewhere suggest a δ18Ow temporal pattern indicating an overall climatic improvement from about 10,500 until about 2300 years BP followed by a degradation in terms of temperature. Three cold events may be suggested at about 4.6/4.7 ka BP, 3.9/4.0 ka BP and 200 BP, respectively, as well as a warm event at about 2300 years BP. These climatic events are in good agreement with the climatic condition existing in central and northern Europe during the same periods. Markedly arid environmental conditions dominated the steppe area during the time interval covered by this work.

  9. Tough, High-Performance, Thermoplastic Addition Polymers

    NASA Technical Reports Server (NTRS)

    Pater, Ruth H.; Proctor, K. Mason; Gleason, John; Morgan, Cassandra; Partos, Richard

    1991-01-01

    Series of addition-type thermoplastics (ATT's) exhibit useful properties. Because of their addition curing and linear structure, ATT polymers have toughness, like thermoplastics, and easily processed, like thermosets. Work undertaken to develop chemical reaction forming stable aromatic rings in backbone of ATT polymer, combining high-temperature performance and thermo-oxidative stability with toughness and easy processibility, and minimizing or eliminating necessity for tradeoffs among properties often observed in conventional polymer syntheses.

  10. The reliability of osteometric techniques for the sex determination of burned human skeletal remains.

    PubMed

    Gonçalves, David

    2011-10-01

    The influence of heat-induced shrinkage on the osteometric sexual dimorphism of human skeletons is still poorly known. In order to investigate this issue, a sample composed of 84 Portuguese individuals cremated at a modern crematorium was examined using standard measurements from the femur, the talus and the calcaneus. In addition, sex determination of the sample was attempted by using osteometric standards developed from the Coimbra collection of identified skeletons. This was carried out to assess the extent of the effect of heat-induced shrinkage on the correct classification of known-sex skeletons while using standards developed on unburned skeletons. Results demonstrated that sexual dimorphism was still observable in the sample of calcined bones despite shrinkage. However, the application of conventional osteometric standards was unsuccessful. As expected, shrinkage caused most females to be correctly classified according to sex, but the sex allocation of males was very poor for all standard measurements. The results were obtained on a small sample but suggest that univariate metric techniques specifically developed for calcined bones may be valuable for sex determination. This would bring new methodological possibilities for biological anthropology and would enlarge the set of techniques regarding sex determination of burned skeletal remains.

  11. Does the centre of mass remain stable during complex human postural equilibrium tasks in weightlessness?

    PubMed

    Stapley, P; Pozzo, T

    1998-01-01

    In normal gravity conditions the execution of voluntary movement involves the displacement of body segments as well as the maintenance of a stable reference value for equilibrium control. It has been suggested that centre of mass (CM) projection within the supporting base (BS) is the stabilised reference for voluntary action, and is conserved in weightlessness. The purpose of this study was to determine if the CM is stabilised during whole body reaching movements executed in weightlessness. The reaching task was conducted by two cosmonauts aboard the Russian orbital station MIR, during the Franco-Russian mission ALTAIR, 1993. Movements of reflective markers were recorded using a videocamera, successive images being reconstructed by computer every 40ms. The position of the CM, ankle joint torques and shank and thigh angles were computed for each subject pre- in- and post-flight using a 7-link mathematical model. Results showed that both cosmonauts adopted a backward leaning posture prior to reaching movements. Inflight, the CM was displaced throughout values in the horizontal axis three times those of pre-flight measures. In addition, ankle dorsi flexor torques inflight increased to values double those of pre- and post-flight tests. This study concluded that CM displacements do not remain stable during complex postural equilibrium tasks executed in weightlessness. Furthermore, in the absence of gravity, subjects changed their strategy for producing ankle torque during spaceflight from a forward to a backward leaning posture.

  12. Arthropod remains in the oral cavities of fossil reptiles support inference of early insectivory.

    PubMed

    Modesto, Sean P; Scott, Diane M; Reisz, Robert R

    2009-12-23

    Inference of feeding preferences in fossil terrestrial vertebrates (tetrapods) has been drawn predominantly from craniodental morphology, and less so from fossil specimens preserving conclusive evidence of diet in the form of oral and/or gut contents. Recently, the pivotal role of insectivory in tetrapod evolution was emphasized by the identification of putative insectivores as the closest relatives of the oldest known herbivorous amniotes. We provide the first compelling evidence for insectivory among early tetrapods on the basis of two 280-million-year-old (late Palaeozoic) fossil specimens of a new species of acleistorhinid parareptile with preserved arthropod cuticle on their toothed palates. Their dental morphology, consisting of homodont marginal dentition with cutting edges and slightly recurved tips, is consistent with an insectivorous diet. The intimate association of arthropod cuticle with the oral region of two small reptiles, from a rich fossil locality that has otherwise not produced invertebrate remains, strongly supports the inference of insectivory in the reptiles. These fossils lend additional support to the hypothesis that the origins and earliest stages of higher vertebrate evolution are associated with relatively small terrestrial insectivores.

  13. New insights from old bones: DNA preservation and degradation in permafrost preserved mammoth remains.

    PubMed

    Schwarz, Carsten; Debruyne, Regis; Kuch, Melanie; McNally, Elizabeth; Schwarcz, Henry; Aubrey, Andrew D; Bada, Jeffrey; Poinar, Hendrik

    2009-06-01

    Despite being plagued by heavily degraded DNA in palaeontological remains, most studies addressing the state of DNA degradation have been limited to types of damage which do not pose a hindrance to Taq polymerase during PCR. Application of serial qPCR to the two fractions obtained during extraction (demineralization and protein digest) from six permafrost mammoth bones and one partially degraded modern elephant bone has enabled further insight into the changes which endogenous DNA is subjected to during diagenesis. We show here that both fractions exhibit individual qualities in terms of the prevailing type of DNA (i.e. mitochondrial versus nuclear DNA) as well as the extent of damage, and in addition observed a highly variable ratio of mitochondrial to nuclear DNA among the six mammoth samples. While there is evidence suggesting that mitochondrial DNA is better preserved than nuclear DNA in ancient permafrost samples, we find the initial DNA concentration in the bone tissue to be as relevant for the total accessible mitochondrial DNA as the extent of DNA degradation post-mortem. We also evaluate the general applicability of indirect measures of preservation such as amino-acid racemization, bone crystallinity index and thermal age to these exceptionally well-preserved samples.

  14. New insights from old bones: DNA preservation and degradation in permafrost preserved mammoth remains

    PubMed Central

    Schwarz, Carsten; Debruyne, Regis; Kuch, Melanie; McNally, Elizabeth; Schwarcz, Henry; Aubrey, Andrew D.; Bada, Jeffrey; Poinar, Hendrik

    2009-01-01

    Despite being plagued by heavily degraded DNA in palaeontological remains, most studies addressing the state of DNA degradation have been limited to types of damage which do not pose a hindrance to Taq polymerase during PCR. Application of serial qPCR to the two fractions obtained during extraction (demineralization and protein digest) from six permafrost mammoth bones and one partially degraded modern elephant bone has enabled further insight into the changes which endogenous DNA is subjected to during diagenesis. We show here that both fractions exhibit individual qualities in terms of the prevailing type of DNA (i.e. mitochondrial versus nuclear DNA) as well as the extent of damage, and in addition observed a highly variable ratio of mitochondrial to nuclear DNA among the six mammoth samples. While there is evidence suggesting that mitochondrial DNA is better preserved than nuclear DNA in ancient permafrost samples, we find the initial DNA concentration in the bone tissue to be as relevant for the total accessible mitochondrial DNA as the extent of DNA degradation post-mortem. We also evaluate the general applicability of indirect measures of preservation such as amino-acid racemization, bone crystallinity index and thermal age to these exceptionally well-preserved samples. PMID:19321502

  15. Remaining Useful Life Prediction for Lithium-Ion Batteries Based on Gaussian Processes Mixture

    PubMed Central

    Li, Lingling; Wang, Pengchong; Chao, Kuei-Hsiang; Zhou, Yatong; Xie, Yang

    2016-01-01

    The remaining useful life (RUL) prediction of Lithium-ion batteries is closely related to the capacity degeneration trajectories. Due to the self-charging and the capacity regeneration, the trajectories have the property of multimodality. Traditional prediction models such as the support vector machines (SVM) or the Gaussian Process regression (GPR) cannot accurately characterize this multimodality. This paper proposes a novel RUL prediction method based on the Gaussian Process Mixture (GPM). It can process multimodality by fitting different segments of trajectories with different GPR models separately, such that the tiny differences among these segments can be revealed. The method is demonstrated to be effective for prediction by the excellent predictive result of the experiments on the two commercial and chargeable Type 1850 Lithium-ion batteries, provided by NASA. The performance comparison among the models illustrates that the GPM is more accurate than the SVM and the GPR. In addition, GPM can yield the predictive confidence interval, which makes the prediction more reliable than that of traditional models. PMID:27632176

  16. Does the centre of mass remain stable during complex human postural equilibrium tasks in weightlessness?

    NASA Astrophysics Data System (ADS)

    Stapley, Paul; Pozzo, Thierry

    In normal gravity conditions the execution of voluntary movement involves the displacement of body segments as well as the maintenance of a stable reference value for equilibrium control. It has been suggested that centre of mass (CM) projection within the supporting base (BS) is the stabilised reference for voluntary action, and is conserved in weightlessness. The purpose of this study was to determine if the CM is stabilised during whole body reaching movements executed in weightlessness. The reaching task was conducted by two cosmonauts aboard the Russian orbital station MIR, during the Franco-Russian mission ALTAIR, 1993. Movements of reflective markers were recorded using a videocamera, successive images being reconstructed by computer every 40ms. The position of the CM, ankle joint torques and shank and thigh angles were computed for each subject pre- in- and post-flight using a 7-link mathematical model. Results showed that both cosmonauts adopted a backward leaning posture prior to reaching movements. Inflight, the CM was displaced throughout values in the horizontal axis three times those of pre-flight measures. In addition, ankle dorsi flexor torques inflight increased to values double those of pre- and post-flight tests. This study concluded that CM displacements do not remain stable during complex postural equilibrium tasks executed in weightlessness. Furthermore, in the absence of gravity, subjects changed their strategy for producing ankle torque during spaceflight from a forward to a backward leaning posture.

  17. Application of novel "mini-amplicon" STR multiplexes to high volume casework on degraded skeletal remains.

    PubMed

    Parsons, Thomas J; Huel, Rene; Davoren, Jon; Katzmarzyk, Cheryl; Milos, Ana; Selmanović, Arijana; Smajlović, Lejla; Coble, Michael D; Rizvić, Adnan

    2007-06-01

    The International Commission on Missing Persons (ICMP) conducts high throughput STR profiling on degraded skeletal remains, primarily recovered from mass graves relating to conflicts from 1992 to 1999 in the former Yugoslavia. To date, over 11,000 individuals have been identified through comparison of bone profiles to a large database of profiles from family members of the missing. To increase success rates in STR recovery, three short amplicon STR multiplexes (a 7-plex, a 6-plex, and a 5-plex) have been devised and implemented. These target loci from large commercial multiplexes, with an average decrease in amplicon size of 144 bp. The ICMP "miniplexes" have proven to provide substantially greater recovery of DNA data from a certain subset of difficult samples. However, the circumstances under which miniplexes provide additional data are restricted, and their advantages do not outweigh those of large commercial multiplexes for a majority of cases. The miniplexes, however, also have a very powerful use in DNA testing to support large scale reassociation of commingled, partial skeletons recovered from secondary mass graves.

  18. Dental materials as an aid for victim identification: examination of calcined remains by SEM/EDS

    NASA Astrophysics Data System (ADS)

    Bush, Mary A.; Bush, Peter J.

    2010-06-01

    Detection and identification of human remains in situations in which they are calcined, disarticulated, and fragmented may be a challenging task. In such situations the non-biological materials that may be present in the dentition can provide the best evidence available for potential identification. Four human jaw segments were utilized. A known combination of dental resins was placed in each segment, when possible. Other restorations, pre-existing in the cadavers, were retained. The jaw segments were cremated in a commercial cremation oven for 2.5 hrs at 1010C. Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (SEM/EDS) was used to analyze the dentition and fragmented debris. Analysis with SEM/EDS demonstrated the ability to confirm brand of known dental resins placed in each cadaver. In addition, pre-existing materials in each jaw segment were profiled and a likely brand name suggested. It was shown that microscopic fragments of heat-altered materials could be identified and classified, adding another level of certainty in victim identification.

  19. Hospital financial performance in the recent recession and implications for institutions that remain financially weak.

    PubMed

    Bazzoli, Gloria J; Fareed, Naleef; Waters, Teresa M

    2014-05-01

    The recent recession had a profound effect on all sectors of the US economy, including health care. We examined how private hospitals fared through the recession and considered how changes in their financial health may affect their ability to respond to future industry challenges. We categorized 2,971 private short-term general medical or surgical hospitals (both nonprofit and for-profit) according to their pre-recession financial health and safety-net status, and we examined their operational status changes and operating and total financial margins during 2006-11. We found that hospitals that were financially weak before the recession remained so during and after the recession. The total margins of nonprofit hospitals (both safety-net and other institutions) declined in 2008 but returned to their pre-recession levels by 2011. The recession did not create additional fiscal pressure on hospitals that were previously financially weak or in safety-net roles. However, both groups continue to have notable financial deficiencies that could limit their abilities to meet the growing demands on the industry.

  20. Least destructive sampling of human remains using laser drilling for Sr isotope analysis by TIMS

    NASA Astrophysics Data System (ADS)

    Willmes, Malte; Moffat, Ian; Grün, Rainer; Armstrong, Richard; Kinsley, Les; McMorrow, Linda

    2013-04-01

    Strontium isotope ratios (87Sr/86Sr) measured in ancient human remains can be used to reconstruct migration patterns of ancient human populations. This application is based on the fact that different geologic regions have distinct Sr isotope signatures that are cycled through the soils, plants and rivers, and eventually enter the food cycle. Sr isotope ratios measured in skeletal remains (bones and teeth) reflect the average of dietary Sr that was consumed when the tissue was formed, allowing the investigation of human migration between geologically distinct terrains. The analysis of human remains is always a sensitive topic requiring minimal damage to the sample, while at the same time providing highly precise and accurate results. Samples can be analysed either by solution methods like thermal ionisation mass spectrometry (TIMS), or by in-situ laser ablation MC-ICP-MS. For TIMS a drill is used to extract a small amount of sample, which is then digested in acid and Sr is separated out using ion exchange chromatography. This technique provides highly precise and accurate results, because any isobaric interferences are removed during chemical separation. The drawback is that drilling may cause visible damage to the sample, restricting access to precious human remains. LA-MC-ICP-MS analysis is very fast and nearly destruction free. However, the accuracy and precision of LA-MC-ICP-MS is limited by a number of factors including large instrumental mass discrimination, laser-induced isotopic and elemental fractionations and molecular interferences on 87Sr. Its application thus requires rigorous data reduction, which can introduce significant uncertainties into the analysis. This is especially true for samples with relatively low Sr concentrations such as human teeth (e.g., Woodhead et al., 2005; Horstwood et al., 2008; Vroon et al., 2008). In addition, LA-MC-ICP-MS has traditionally required a flat sample surface, thus an unbroken tooth needs to be cut, which is rather

  1. Medicaid Tobacco Cessation: Big Gaps Remain In Efforts To Get Smokers To Quit.

    PubMed

    Ku, Leighton; Bruen, Brian K; Steinmetz, Erika; Bysshe, Tyler

    2016-01-01

    Medicaid enrollees are about twice as likely as the general US population to smoke tobacco: 32 percent of people in the program identify themselves as smokers. This article provides the first data about the effectiveness of state Medicaid programs in promoting smoking cessation. Our analysis of Medicaid enrollees' use of cessation medications found that about 10 percent of current smokers received cessation medications in 2013. Every state Medicaid program covers cessation benefits, but the use of these medications varies widely, with the rate in Minnesota being thirty times higher than that in Texas. Most states could increase their efforts to help smokers quit, working with public health agencies, managed care plans, and others. In 2013 Medicaid spent $103 million on cessation medications-less than 0.25 percent of the estimated cost to Medicaid of smoking-related diseases. Additionally, states that have not expanded Medicaid eligibility in the wake of the Affordable Care Act have higher smoking prevalence and lower utilization rates of cessation medication, compared to expansion states. Given these factors, nonexpansion states will have a greater public health burden related to smoking. Medicaid and public health agencies should work together to make smoking cessation a priority for Medicaid beneficiaries.

  2. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  3. Dynamics of ultrasonic additive manufacturing.

    PubMed

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder.

  4. Additive Manufacturing: From Rapid Prototyping to Flight

    NASA Technical Reports Server (NTRS)

    Prater, Tracie

    2015-01-01

    Additive manufacturing (AM) offers tremendous promise for the rocket propulsion community. Foundational work must be performed to ensure the safe performance of AM parts. Government, industry, and academia must collaborate in the characterization, design, modeling, and process control to accelerate the certification of AM parts for human-rated flight.

  5. Trust as a determinant of entrepreneurs' preference to remain tenants in Turkish business incubators.

    PubMed

    Aşcigil, Semra F; Magner, Nace R; Temel, Elif Karabulut

    2011-08-01

    Relations of two types of trust by entrepreneurs with the entrepreneurs' preference to remain an incubator tenant were examined using questionnaire data from 67 owners of companies in 6 Turkish incubators. As hypothesized, trust in incubator management had a positive and unique relation with preference to remain an incubator tenant. However, trust in other incubator tenants did not show the hypothesized positive and unique relation with preference to remain a tenant; the results indicated the relation is negative.

  6. Adverse reactions to the sulphite additives

    PubMed Central

    Misso, Neil LA

    2012-01-01

    Sulphites are widely used as preservative and antioxidant additives in the food and pharmaceutical industries. Exposure to sulphites has been reported to induce a range of adverse clinical effects in sensitive individuals, ranging from dermatitis, urticaria, flushing, hypotension, abdominal pain and diarrhoea to life-threatening anaphylactic and asthmatic reactions. Exposure to the sulphites arises mainly from the consumption of foods and drinks that contain these additives; however exposure may also occur through the use of pharmaceutical products, as well as in occupational settings. Most studies report a prevalence of sulphite sensitivity of 3 to 10% among asthmatic subjects who ingest these additives. However, the severity of these reactions varies, and steroid-dependent asthmatics, those with marked airway hyperresponsiveness, and children with chronic asthma, appear to be at greater risk. Although a number of potential mechanisms have been proposed, the precise mechanisms underlying sulphite sensitivity remain unclear. PMID:24834193

  7. Taphonomic alterations by the rodent species woodland vole (Microtus pinetorum) upon human skeletal remains.

    PubMed

    Pokines, James T

    2015-12-01

    This forensic case report describes the taphonomic effects of woodland vole (Microtus pinetorum) upon a set of skeletonized human remains recovered in Massachusetts, USA. Remains of an individual of this rodent species were discovered where it had been nesting inside the human cranium. Fine, parallel grooves indicative of small rodent gnawing were noted on multiple postcranial elements, and all isolated grooves were consistent in size with the incisors of this species. Other taphonomic alterations to these remains include some gnawing damage and dispersal by large carnivores. This case represents the first report of this rodent species affecting human remains.

  8. Decontamination and Management of Human Remains Following Incidents of Hazardous Chemical Release

    SciTech Connect

    Hauschild, Veronique; Watson, Annetta Paule; Bock, Robert Eldon

    2012-01-01

    Abstract Objective: To provide specific procedural guidance and resources for identification, assessment, control, and mitigation of compounds that may contaminate human remains resulting from chemical attack or release. Design: A detailed technical, policy, and regulatory review is summarized. Setting: Guidance is suitable for civilian or military settings where human remains potentially contaminated with hazardous chemicals may be present. Settings would include sites of transportation accidents, natural disasters, terrorist or military operations, mortuary affairs or medical examiner processing and decontamination points, and similar. Patients, Participants: While recommended procedures have not been validated with actual human remains, guidance has been developed from data characterizing controlled experiments with fabrics, materiel, and laboratory animals. Main Outcome Measure(s): Presentation of logic and specific procedures for remains management, protection and decontamination of mortuary affairs personnel, as well as decision criteria for determining when remains are sufficiently decontaminated so as to pose no chemical health hazard. Results: Established procedures and existing equipment/materiel available for decontamination and verification provide appropriate and reasonable means to mitigate chemical hazards from remains. Extensive characterization of issues related to remains decontamination indicates that supra-lethal concentrations of liquid chemical warfare agent VX may prove difficult to decontaminate and verify in a timely fashion. Specialized personnel can and should be called upon to assist with monitoring necessary to clear decontaminated remains for transport and processing. Conclusions: Once appropriate decontamination and verification have been accomplished, normal procedures for remains processing and transport to the decedent s family and the continental United States can be followed.

  9. Personality Trait Development and Social Investment in Work.

    PubMed

    Hudson, Nathan W; Roberts, Brent W; Lodi-Smith, Jennifer

    2012-06-01

    A longitudinal study of employed individuals was used to test the relationship between social investment at work-the act of cognitively and emotionally committing to one's job-and longitudinal and cross-sectional personality trait development. Participants provided ratings of personality traits and social investment at work at two time-points, separated by approximately three years. Data were analyzed using latent change models. Cross-sectional results showed that extraversion, agreeableness, conscientiousness and emotional stability were related to social investment at work. Additionally, a positive association was found between longitudinal change in social investment in work and change in personality traits-especially conscientiousness. Finally, the correlated changes in social investment and personality traits were invariant across age groups, suggesting that personality traits remain malleable across the lifespan.

  10. The effect of alkaline additives on the performance of surfactant systems designed to recover light oils

    SciTech Connect

    French, T.R.; Josephson, C.B.; Evans, D.B.

    1991-02-01

    Surfactant flooding is flexible because of the ability to optimize formulations for a wide range of reservoir conditions and crude oil types. The objective for this work was to determine if the addition of alkaline additives will allow the design of surfactant formulations that are effective for the recovery of crude oil, while, at the same time, maintaining the surfactant concentration at a much lower level than has previously been used for micellar flooding. Specifically, the focus of the work was on light, midcontinent crudes that typically have very low acid contents. These oils are typical of much of the midcontinent resource. The positive effect of alkaline additives on the phase behavior of the surfactant formulations and acidic crude oils is well known. The extension to nonacidic and slightly acidic oils is not obvious. Three crude oils, a variety of commercial surfactants, and several alkaline additives were tested. The oils had acid numbers that ranged from 0.13, which is quite low, to less than 0.01 mg KOH/g of oil. Alkaline additives were found to be very effective in recovering Delaware-Childers (OK) oil at elevated temperatures, but much less effective at reservoir temperatures. Alkaline additives were very effective with Teapot Dome (WY) oil. With Teapot Dome oil, surfactant/alkali systems produced ultralow IFT values and recovered 60% of the residual oil that remained after waterflooding. The effect of alkaline additives on recovering Hepler (KS) oil was minimal. The results of this work indicate that alkaline additives do have merit for use in surfactant flooding of low acid crude oils; however, no universal statement about applicability can be made. Each oil behaves differently, with this treatment, and the effect of alkaline additives must be determined (at reservoir conditions) for each oil. 23 refs., 13 figs., 3 tabs.

  11. Embryology of Early Jurassic dinosaur from China with evidence of preserved organic remains.

    PubMed

    Reisz, Robert R; Huang, Timothy D; Roberts, Eric M; Peng, ShinRung; Sullivan, Corwin; Stein, Koen; LeBlanc, Aaron R H; Shieh, DarBin; Chang, RongSeng; Chiang, ChengCheng; Yang, Chuanwei; Zhong, Shiming

    2013-04-11

    Fossil dinosaur embryos are surprisingly rare, being almost entirely restricted to Upper Cretaceous strata that record the late stages of non-avian dinosaur evolution. Notable exceptions are the oldest known embryos from the Early Jurassic South African sauropodomorph Massospondylus and Late Jurassic embryos of a theropod from Portugal. The fact that dinosaur embryos are rare and typically enclosed in eggshells limits their availability for tissue and cellular level investigations of development. Consequently, little is known about growth patterns in dinosaur embryos, even though post-hatching ontogeny has been studied in several taxa. Here we report the discovery of an embryonic dinosaur bone bed from the Lower Jurassic of China, the oldest such occurrence in the fossil record. The embryos are similar in geological age to those of Massospondylus and are also assignable to a sauropodomorph dinosaur, probably Lufengosaurus. The preservation of numerous disarticulated skeletal elements and eggshells in this monotaxic bone bed, representing different stages of incubation and therefore derived from different nests, provides opportunities for new investigations of dinosaur embryology in a clade noted for gigantism. For example, comparisons among embryonic femora of different sizes and developmental stages reveal a consistently rapid rate of growth throughout development, possibly indicating that short incubation times were characteristic of sauropodomorphs. In addition, asymmetric radial growth of the femoral shaft and rapid expansion of the fourth trochanter suggest that embryonic muscle activation played an important role in the pre-hatching ontogeny of these dinosaurs. This discovery also provides the oldest evidence of in situ preservation of complex organic remains in a terrestrial vertebrate.

  12. Delayed entry into and failure to remain in HIV care among HIV-infected adolescents.

    PubMed

    Minniear, Timothy D; Gaur, Aditya H; Thridandapani, Anil; Sinnock, Christine; Tolley, Elizabeth A; Flynn, Patricia M

    2013-01-01

    Prompt entry into care and retention in care are critical for improving outcomes among HIV-infected individuals. This study identified factors associated with HIV-infected adolescents who delayed entry into HIV care (DEC) after diagnosis of HIV or who fail to remain in care afterward (FRC). We reviewed clinical, demographic, and social data from the records of 202 HIV-positive adolescents (13-21 years old) infected via high-risk behaviors. Strength of association between clinical and social factors and DEC or FRC were estimated with log-linear regression models. DEC occurred in 38% (76/202) of adolescents. Factors independently associated with DEC were unstable residence (RR 1.5; CI: 1.0-2.1) and, compared with less education, college attendance (RR 2.1; CI: 1.5-3.2). FRC occurred in 29% (52/177) of adolescents established in care. Compared with college attendees, high school students (RR: 4.5; CI: 1.2-17.3) and those who dropped out of high school (RR: 4.0; CI: 1.1-15) were more likely to FRC. Compared with adolescents with private insurance, adolescents without insurance (despite access to free care) were more likely to FRC (RR: 2.8; CI: 1.1-6.9). Controlling for sex, adolescents with children were more likely to FRC (RR: 1.8; CI: 1.0-3.1). Interventions to avoid DEC that target HIV-infected adolescents with unstable residences or those diagnosed while attending college are warranted. Among patients engaged in care, those with only high school education or without insurance-which may be markers for socioeconomic status-need additional attention to keep them in care.

  13. The effect of common imaging and hot water maceration on DNA recovery from skeletal remains.

    PubMed

    Frank, Emilie M; Mundorff, Amy Z; Davoren, Jon M

    2015-12-01

    Identifying human remains often begins with cleaning and imaging the material. Hot water maceration is used to remove adherent soft tissue from bone and radiographs are taken to better visualize osseous details. Heat and radiation are known to have harmful effects on DNA, but their ability to degrade DNA when used for cleaning and imaging has not been well studied. To better understand their individual and combined effects on the recoverability of DNA from bone, skeletal samples were subjected to (1) hot water maceration (62 °C for 45 min); (2) CT scanning (0.6mm slices, 120 kV, 10.4s); (3) X-ray (50 kVp, 150 mA, 0.03 s, 40 in); and (4) all 3 treatments combined. Forty-eight DNA samples were extracted, quantified and amplified with the AmpFLSTR(®) Identifiler(®) system. Nearly all of the processed samples had reduced RFU values relative to the unprocessed samples, indicating some amount of genetic loss. This loss did not always translate into loss of profile completeness, since only a few samples had a reduction in the number of loci detected after processing. DNA yields were not significantly reduced by any one of the processing methods, however the results indicate that the damaging effects are additive. It is possible that processing may reduce a bone's DNA reservoir and as more procedures are preformed, the pool of available genetic information might be diminished. Many intrinsic and extrinsic factors can affect the recoverability of DNA from bone. Collecting a DNA sample prior to processing avoids the negative effects from hot water maceration and radiological imaging.

  14. Patterns of faunal extinction and paleoclimatic change from mid-Holocene mammoth and polar bear remains, Pribilof Islands, Alaska

    NASA Astrophysics Data System (ADS)

    Veltre, Douglas W.; Yesner, David R.; Crossen, Kristine J.; Graham, Russell W.; Coltrain, Joan B.

    2008-07-01

    Qagnaxˆ Cave, a lava tube cave on St. Paul Island in the Pribilofs, has recently produced a mid-Holocene vertebrate faunal assemblage including woolly mammoth, polar bear, caribou, and Arctic fox. Several dates on the mammoth remains converge on 5700 14C yr BP. These dates, ~ 2300 yr younger than mammoth dates previously published from the Pribilof Islands, make these the youngest remains of proboscideans, and of non-extinct Quaternary megafauna, recovered from North America. Persistence of mammoths on the Pribilofs is most parsimoniously explained by the isolation of the Pribilofs and the lack of human presence in pre-Russian contact times, but an additional factor may have been the local existence of high-quality forage in the form of grasses enriched by nutrients derived from local Holocene tephras. This interpretation is reinforced by stable carbon and nitrogen isotope values obtained from the mammoth remains. The endpoint of mammoth survival in the Pribilofs is unknown, but maybe coterminous with the arrival of polar bears whose remains in the cave date to the Neoglacial cold period of ~ 4500 to 3500 14C yr BP. The polar bear record corroborates a widespread cooling of the Bering Sea region at that time.

  15. Navy Public Works Administration.

    DTIC Science & Technology

    1980-06-01

    Navy a barrel and a half of oil. Additionally, the low sulfur con- tent of solid waste makes it less of an air polutant than most coal or fuel oils...916 -pk PREFACE The Navy can best accomplish its mission if ships and air - craft are ready and able to perform as designed, and...34public works": air fields; ammunition storage facilities; amphibious pontoon equipment; bridges and causeways; buildings (including furniture and fixed

  16. 14 CFR 121.393 - Crewmember requirements at stops where passengers remain on board.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ensure that a person who is qualified in the emergency evacuation procedures for the airplane, as... are shut down; and (ii) At least one floor level exit remains open to provide for the deplaning of... are shut down; (ii) At least one floor level exit remains open to provide for the deplaning...

  17. Career Motivation in Newly Licensed Registered Nurses: What Makes Them Remain

    ERIC Educational Resources Information Center

    Banks, Zarata Mann; Bailey, Jessica H.

    2010-01-01

    Despite vast research on newly licensed registered nurses (RNs), we don't know why some newly licensed registered nurses remain in their current jobs and others leave the nursing profession early in their career. Job satisfaction, the most significant factor emerging from the literature, plays a significant role in nurses' decisions to remain in…

  18. 22 CFR 72.30 - Provisions in a will or advanced directive regarding disposition of remains.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... WELFARE OF AMERICANS, THEIR PROPERTY AND ESTATES DEATHS AND ESTATES Real Property Overseas Belonging to A... disposition of remains. United States state law regarding advance directives, deaths and estates include provisions regarding a person's right to direct disposition of remains. Host country law may or may...

  19. 76 FR 58037 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-19

    ... Funerary Objects in the Possession of the Colorado Historical Society (History Colorado), Denver, CO... Society (History Colorado) completed an inventory of human remains and associated funerary objects, and... cultural affiliation with the human remains should contact the Colorado Historical Society at the...

  20. 78 FR 25470 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-01

    ... National Park Service Notice of Inventory Completion for Native American Human Remains and Associated... Parkway has corrected an inventory of human remains and associated funerary objects, published in a Notice of Inventory Completion Correction in the Federal Register on April 1, 2005. This notice corrects...

  1. How Safe Are Color Additives?

    MedlinePlus

    ... Home For Consumers Consumer Updates How Safe are Color Additives? Share Tweet Linkedin Pin it More sharing ... Consumer Updates RSS Feed Download PDF (380 K) Color additives give the red tint to your fruit ...

  2. Taphonomic Patterning of Cemetery Remains Received at the Office of the Chief Medical Examiner, Boston, Massachusetts.

    PubMed

    Pokines, James T; Zinni, Debra Prince; Crowley, Kate

    2016-01-01

    A sample of 49 cases of cemetery remains received at the Office of the Chief Medical Examiner, Massachusetts (OCME-MA), in Boston was compared with published taphonomic profiles of cemetery remains. The present sample is composed of a cross section of typical cases in this region that ultimately are derived from modern to historical coffin burials and get turned over to or seized by law enforcement. The present sample was composed of a large portion of isolated remains, and most were completely skeletonized. The most prevalent taphonomic characteristics included uniform staining (77.6%), coffin wear (46.9%), and cortical Exfoliation (49.0%). Other taphonomic changes occurring due to later surface exposure of cemetery remains included subaerial weathering, animal gnawing, algae formation, and excavation marks. A case of one set of skeletal remains associated with coffin artifacts and cemetery offerings that was recovered from transported cemetery fill is also presented.

  3. "SINCE I MUST PLEASE THOSE BELOW": HUMAN SKELETAL REMAINS RESEARCH AND THE LAW.

    PubMed

    Holland, Thomas D

    2015-01-01

    The ethics of non-invasive scientific research on human skeletal remains are poorly articulated and lack a single, definitive analogue in western law. Laws governing invasive research on human fleshed remains, as well as bio-ethical principles established for research on living subjects, provide effective models for the establishment of ethical guidelines for non-invasive research on human skeletal remains. Specifically, non-invasive analysis of human remains is permissible provided that the analysis and collection of resulting data (1) are accomplished with respect for the dignity of the individual, (2) do not violate the last-known desire of the deceased, (3) do not adversely impact the right of the next of kin to perform a ceremonious and decent disposal of the remains, and (4) do not unduly or maliciously violate the privacy interests of the next of kin.

  4. Farm-scale distribution of deforestation and remaining forest cover in Mato Grosso

    NASA Astrophysics Data System (ADS)

    Richards, Peter D.; Vanwey, Leah

    2016-04-01

    An analysis of data on property size and type as well as land use reveals the distribution of deforestation, remaining forest cover and carbon stocks in Mato Grosso, Brazil's third largest state. Nearly two-thirds of remaining forests and carbon reserves, equating to between 2 and 3 Pg of carbon, are located on private properties. Around 80% of forests and carbon reserves are on properties larger than 1,000 ha, with smallholder farms and public land reform settlements controlling only a tiny fraction of the state's remaining forest and carbon reserves. Efforts to reduce emissions from deforestation and forest degradation must target owners controlling most of the remaining forest and land types with the highest deforestation rates. We thus suggest that policymakers seeking to protect the remaining forest should focus both incentives and enforcement of anti-deforestation laws in the larger properties where most of these forests are located.

  5. After rotator cuff tears, the remaining (intact) tendons are mechanically altered.

    PubMed

    Perry, Stephanie M; Getz, Charles L; Soslowsky, Louis J

    2009-01-01

    Although presumed, damage in the remaining (intact) rotator cuff tendons in the presence of an isolated supraspinatus tendon tear or multiple tendon tear has not been well studied. This study used an animal model of multiple rotator cuff tendon tears to investigate alterations in the remaining (intact) tendon mechanical properties at 4 and 8 weeks after injury. Twenty-four rats served as uninjured controls, whereas 72 were divided among 3 tendon detachment groups: supraspinatus tendon detachment, supraspinatus + infraspinatus tendon detachment, and supraspinatus + subscapularis tendon detachment. The remaining (intact) rotator cuff tendons had decreased mechanical properties in the presence of rotator cuff tears. The remaining (intact) subscapularis and infraspinatus tendon cross-sectional areas increased, whereas tendon modulus decreased after tears of both 1 and 2 tendons. The remaining (intact) tendon cross-sectional areas continued to increase with time after injury. These alterations could potentially lead to further tendon damage and tear progression.

  6. Detergent Additive for Lubricating Oils,

    DTIC Science & Technology

    The Russian patent pertains to a method of producing additives for lubricating oils . A method is known for producing an antiwear additive for... lubricating oils by processing phenols with phosphorus oxychloride, phosphoric acid esters are obtained. In order to give the additive detergent properties

  7. An integrated Gaussian process regression for prediction of remaining useful life of slow speed bearings based on acoustic emission

    NASA Astrophysics Data System (ADS)

    Aye, S. A.; Heyns, P. S.

    2017-02-01

    This paper proposes an optimal Gaussian process regression (GPR) for the prediction of remaining useful life (RUL) of slow speed bearings based on a novel degradation assessment index obtained from acoustic emission signal. The optimal GPR is obtained from an integration or combination of existing simple mean and covariance functions in order to capture the observed trend of the bearing degradation as well the irregularities in the data. The resulting integrated GPR model provides an excellent fit to the data and improves over the simple GPR models that are based on simple mean and covariance functions. In addition, it achieves a low percentage error prediction of the remaining useful life of slow speed bearings. These findings are robust under varying operating conditions such as loading and speed and can be applied to nonlinear and nonstationary machine response signals useful for effective preventive machine maintenance purposes.

  8. 48 CFR 27.405-2 - Existing works.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... audiovisual works; sound recordings; musical, dramatic, and literary works; pantomimes and choreographic works... to be modified through editing, translation, or addition of subject matter, etc. (rather...

  9. CWD prions remain infectious after passage through the digestive system of coyotes (Canis latrans).

    PubMed

    Nichols, Tracy A; Fischer, Justin W; Spraker, Terry R; Kong, Qingzhong; VerCauteren, Kurt C

    2015-01-01

    Chronic wasting disease (CWD) is a geographically expanding prion disease of wild and captive cervids in North America. Disease can be transmitted directly, animal to animal, or indirectly via the environment. CWD contamination can occur residually in the environment via soil, water, and forage following deposition of bodily fluids such as urine, saliva, and feces, or by the decomposition of carcasses. Recent work has indicated that plants may even take up prions into the stems and leaves. When a carcass or gut pile is present in the environment, a large number of avian and mammalian species visit and consume the carrion. Additionally, predators like coyotes, likely select for disease-compromised cervids. Natural cross-species CWD transmission has not been documented, however, passage of infectious prion material has been observed in the feces of crows. In this study we evaluated the ability of CWD-infected brain material to pass through the gastrointestinal tract of coyotes (Canis latrans) following oral ingestion, and be infectious in a cervidized transgenic mouse model. Results from this study indicate that coyotes can pass infectious prions via their feces for at least 3 days post ingestion, demonstrating that mammalian scavengers could contribute to the translocation and contamination of CWD in the environment.

  10. CWD prions remain infectious after passage through the digestive system of coyotes (Canis latrans)

    PubMed Central

    Nichols, Tracy A; Fischer, Justin W; Spraker, Terry R; Kong, Qingzhong; VerCauteren, Kurt C

    2015-01-01

    ABSTRACT Chronic wasting disease (CWD) is a geographically expanding prion disease of wild and captive cervids in North America. Disease can be transmitted directly, animal to animal, or indirectly via the environment. CWD contamination can occur residually in the environment via soil, water, and forage following deposition of bodily fluids such as urine, saliva, and feces, or by the decomposition of carcasses. Recent work has indicated that plants may even take up prions into the stems and leaves. When a carcass or gut pile is present in the environment, a large number of avian and mammalian species visit and consume the carrion. Additionally, predators like coyotes, likely select for disease-compromised cervids. Natural cross-species CWD transmission has not been documented, however, passage of infectious prion material has been observed in the feces of crows. In this study we evaluated the ability of CWD-infected brain material to pass through the gastrointestinal tract of coyotes (Canis latrans) following oral ingestion, and be infectious in a cervidized transgenic mouse model. Results from this study indicate that coyotes can pass infectious prions via their feces for at least 3 days post ingestion, demonstrating that mammalian scavengers could contribute to the translocation and contamination of CWD in the environment. PMID:26636258

  11. ADDITIVE TESTING FOR IMPROVED SULFUR RETENTION: PRELIMINARY REPORT

    SciTech Connect

    Amoroso, J.; Fox, K.

    2011-09-07

    The Savannah River National Laboratory is collaborating with Alfred University to evaluate the potential for additives in borosilicate glass to improve sulfur retention. This preliminary report provides further background on the incorporation of sulfur in glass and outlines the experiments that are being performed by the collaborators. A simulated waste glass composition has been selected for the experimental studies. The first phase of experimental work will evaluate the impacts of BaO, PbO, and V{sub 2}O{sub 5} at concentrations of 1.0, 2.0, and 5.0 wt % on sulfate retention in simulated high level waste borosilicate glass. The second phase of experimental work will evaluate the effects of time at the melt temperature on sulfur retention. The resulting samples will be characterized to determine the amount of sulfur remaining as well as to identify the formation of any crystalline phases. The results will be used to guide the future selection of frits and glass forming chemicals in vitrifying Department of Energy wastes containing high sulfur concentrations.

  12. Monitoring buried remains with a transparent 3D half bird's eye view of ground penetrating radar data in the Zeynel Bey tomb in the ancient city of Hasankeyf, Turkey

    NASA Astrophysics Data System (ADS)

    Kadioglu, Selma; Kagan Kadioglu, Yusuf; Akin Akyol, Ali

    2011-09-01

    The aim of this paper is to show a new monitoring approximation for ground penetrating radar (GPR) data. The method was used to define buried archaeological remains inside and outside the Zeynel Bey tomb in Hasankeyf, an ancient city in south-eastern Turkey. The study examined whether the proposed GPR method could yield useful results at this highly restricted site, which has a maximum diameter inside the tomb of 4 m. A transparent three-dimensional (3D) half bird's eye view was constructed from a processed parallel-aligned two-dimensional GPR profile data set by using an opaque approximation instead of linear opacity. Interactive visualizations of transparent 3D sub-data volumes were conducted. The amplitude-colour scale was balanced by the amplitude range of the buried remains in a depth range, and appointed a different opaque value for this range, in order to distinguish the buried remains from one another. Therefore, the maximum amplitude values of the amplitude-colour scale were rearranged with the same colour range. This process clearly revealed buried remains in depth slices and transparent 3D data volumes. However, the transparent 3D half bird's eye views of the GPR data better revealed the remains than the depth slices of the same data. In addition, the results showed that the half bird's eye perspective was important in order to image the buried remains. Two rectangular walls were defined, one within and the other perpendicularly, in the basement structure of the Zeynel Bey tomb, and a cemetery was identified aligned in the east-west direction at the north side of the tomb. The transparent 3D half bird's eye view of the GPR data set also determined the buried walls outside the tomb. The findings of the excavation works at the Zeynel Bey tomb successfully overlapped with the new visualization results.

  13. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  14. The interactive effect of the degradation of cotton clothing and decomposition fluid production associated with decaying remains.

    PubMed

    Ueland, Maiken; Nizio, Katie D; Forbes, Shari L; Stuart, Barbara H

    2015-10-01

    Textiles are a commonly encountered source of evidence in forensic cases. In the past, most research has been focused on how textiles affect the decomposition process while little attention has been paid to how the decomposition products interact with the textiles. While some studies have shown that the presence of remains will have an effect on the degradation of clothing associated with a decaying body, very little work has been carried out on the specific mechanisms that prevent or delay textile degradation when in contact with decomposing remains. In order to investigate the effect of decomposition fluid on textile degradation, three clothed domestic pig (Sus scrofa domesticus) carcasses were placed on a soil surface, textile specimens were collected over a period of a year and were then analysed using ATR-FTIR spectroscopy and GC-MS. Multivariate statistical analysis was used to analyse the data. Cotton specimens not associated with remains degraded markedly, whereas the samples exposed to decomposition fluids remained relatively intact over the same time frame. An investigation of the decomposition by-products found that the protein-related bands remained stable and unchanged throughout the experiment. Lipid components, on the other hand, demonstrated a significant change; this was confirmed with the use of both ATR-FTIR spectroscopy and GC-MS. Through an advanced statistical approach, information about the decomposition by-products and their characteristics was obtained. There is potential that the lipid profile in a textile specimen could be a valuable tool used in the examination of clothing located at a crime scene.

  15. Damage Pre-Cursors Based Assessment of Accrued Thermo-Mechanical Damage and Remaining Useful Life in Field Deployed Electronics

    NASA Astrophysics Data System (ADS)

    Lall, Pradeep; Harsha, Mahendra; Goebel, Kai; Jones, Jim

    Field deployed electronics may accrue damage due to environmental exposure and usage after finite period of service but may not often have any o-indicators of failure such as cracks or delamination. A method to interrogate the damage state of field deployed electronics in the pre-failure space may allow insight into the damage initiation, progression, and remaining useful life of the deployed system. Aging has been previously shown to effect the reliability and constitutive behavior of second-level leadfree interconnects. Prognostication of accrued damage and assessment of residual life can provide valuable insight into impending failure. In this paper, field deployed parts have been extracted and prognosticated for accrued damage and remaining useful life in an anticipated future deployment environment. A subset of the field deployed parts have been tested to failure in the anticipated field deployed environment to validate the assessment of remaining useful life. In addition, some parts have been subjected to additional known thermo-mechanical stresses and the incremental damage accrued validated with respect to the amount of additional damage imposed on the assemblies. The presented methodology uses leading indicators of failure based on micro-structural evolution of damage to identify accrued damage in electronic systems subjected to sequential stresses of thermal aging and thermal cycling. Damage equivalency methodologies have been developed to map damage accrued in thermal aging to the reduction in thermo-mechanical cyclic life based on damage proxies. The expected error with interrogation of system state and assessment of residual life has been quantified. Prognostic metrics including α-λmetric, sample standard deviation, mean square error, mean absolute percentage error, average bias, relative accuracy, and cumulative relative accuracy have been used to compare the performance of the damage proxies.

  16. Additive manufacturing: From implants to organs.

    PubMed

    Douglas, Tania S

    2014-05-12

    Additive manufacturing (AM) constructs 3D objects layer by layer under computer control from 3D models. 3D printing is one example of this kind of technology. AM offers geometric flexibility in its products and therefore allows customisation to suit individual needs. Clinical success has been shown with models for surgical planning, implants, assistive devices and scaffold-based tissue engineering. The use of AM to print tissues and organs that mimic nature in structure and function remains an elusive goal, but has the potential to transform personalised medicine, drug development and scientific understanding of the mechanisms of disease. 

  17. Auditory-motor entrainment in vocal mimicking species: Additional ontogenetic and phylogenetic factors.

    PubMed

    Schachner, Adena

    2010-05-01

    We have recently found robust evidence of motor entrainment to auditory stimuli in multiple species of non-human animal, all of which were capable of vocal mimicry. In contrast, the ability remained markedly absent in many closely related species incapable of vocal mimicry. This suggests that vocal mimicry may be a necessary precondition for entrainment. However, within the vocal mimicking species, entrainment appeared non-randomly, suggesting that other components besides vocal mimicry play a role in the capacity and tendency to entrain. Here we discuss potential additional factors involved in entrainment. New survey data show that both male and female parrots are able to entrain, and that the entrainment capacity appears throughout the lifespan. We suggest routes for future study of entrainment, including both developmental studies in species known to entrain and further work to detect entrainment in species not well represented in our dataset. These studies may shed light on additional factors necessary for entrainment in addition to vocal mimicry.

  18. Anthropological and radiographic comparison of vertebrae for identification of decomposed human remains.

    PubMed

    Mundorff, Amy Z; Vidoli, Giovanna; Melinek, Judy

    2006-09-01

    This case study demonstrates the importance of involving an anthropologist in forensic situations with decomposed remains. Anthropological consultation was used in conjunction with the comparison of antemortem and postmortem radiographs to establish positive identification of unknown, decomposed remains. The remains had no traditional identifying features such as fingerprints or dental. Through anthropological analysis, it was determined the decedent was male, between 20 and 23 years at time of death and c. 5'2'' tall. This information allowed for a presumptive identification and a request for antemortem radiographs. The missing person was identified comparing the spinous processes of the cervical and thoracic vertebrae between ante- and postmortem radiographs.

  19. Properties and effects of remaining carbon from waste plastics gasifying on iron scale reduction.

    PubMed

    Zhang, Chongmin; Chen, Shuwen; Miao, Xincheng; Yuan, Hao

    2011-06-01

    The carbonous activities of three kinds of carbon-bearing materials gasified from plastics were tested with coal coke as reference. The results showed that the carbonous activities of these remaining carbon-bearing materials were higher than that of coal-coke. Besides, the fractal analyses showed that the porosities of remaining carbon-bearing materials were higher than that of coal-coke. It revealed that these kinds of remaining carbon-bearing materials are conducive to improve the kinetics conditions of gas-solid phase reaction in iron scale reduction.

  20. Status of Women in Social Work Education

    ERIC Educational Resources Information Center

    Sakamoto, Izumi; Anastas, Jeane W.; McPhail, Beverly M.; Colarossi, Lisa G.

    2008-01-01

    This invited study sought to determine the current status of women in social work education for the special section of the "Journal of Social Work Education." Analysis of the latest data available indicate that gender differences remain pervasive across many aspects of social work education, including pay, rank, job duties, and tenure.…

  1. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  2. [Computerization of hospital blood banks in France: what has been done and what remains to be done].

    PubMed

    Py, J-Y; Schlanger, S; Gorodetzky, D; Lapègue, R; Besse-Moreau, M; Herr, A-L; Renaudier, P; Daurat, G; Breton, P

    2012-11-01

    French regulation requires hospital blood banks to have data processing of their blood transfusion activities. In order to help them to achieve this goal, guidelines were published by an official working party. For their diffusion, a study was launched to assess current gaps between guidelines and reality. Analysis of the first forty responses shows: 1) computerization is already set up for main blood banks and is going well for the others; 2) most of guideline functionalities are now working in main blood banks; but some points need specific developments; 3) taken as a whole, other blood banks are further from guideline requirements, even if some have already reached the goal; 4) guidelines are able to point out to all hospital blood banks what remains to be done.

  3. North façade, entrance. The square tower has the remains of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    North façade, entrance. The square tower has the remains of a sign, Kaiser Foundation Hospital. Horizontal ribbon windows continue on this façade. - Richmond Field Hospital, 1330 Cutting Boulevard, Richmond, Contra Costa County, CA

  4. IET control building (TAN620). remains of periscope connections and control ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    IET control building (TAN-620). remains of periscope connections and control console at far west wall of control room. facing westerly. INEEL negative no. HD-21-2-2 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  5. Simple and highly effective DNA extraction methods from old skeletal remains using silica columns.

    PubMed

    Lee, Hwan Young; Park, Myung Jin; Kim, Na Young; Sim, Jeong Eun; Yang, Woo Ick; Shin, Kyoung-Jin

    2010-10-01

    The recovery of DNA data from old skeletal remains is often difficult due to degraded and very low yield of extracted DNA and the presence of PCR inhibitors. Herein, we compared several silica-based DNA extraction methods from artificially degraded DNA, DNA with PCR inhibitors and DNA from old skeletal remains using quantitative real-time PCR. We present a modified large-scale silica-based extraction combined with complete demineralization, that enables maximum DNA recovery and efficient elimination of PCR inhibitors. This is performed with high concentration of EDTA solution for demineralization of bone powder followed by QIAamp spin columns and buffers from the QIAquick PCR purification kit. We have successfully used this modified technique to perform STR analysis for 55-year-old skeletal remains. The results of this study will contribute to solve the forensic cases dealing with skeletal remains.

  6. Isolation of PCR ready-human DNA using copper nanoparticles from skeletal remains.

    PubMed

    Lodha, Anand; Ansari, Niha; Shah, Shahil; Rao, M V; Menon, Shobhana K

    2017-01-01

    Present study represents a novel approach of PCR ready-human DNA extraction method from skeletal remains using copper nanoparticles (CuNPs) for personnel identification. To achieve rapid, cost effective, sensitive and non-hazardous method for DNA extraction we utilized CuNPs synthesized using microwave. The applicability of this approach was first tested in blood samples and afterwards, this system was extended to skeletal remains' samples also. This method yields good quality DNA that are ready for PCR reactions from small quantities of blood and skeletal remains. Consequently, even small quantities of nanoparticles could be potentially utilized for a highly efficient isolation of DNA from skeletal remains as well as from ancient archaeological samples. The present method has the advantages that it is quick with high yield, inexpensive, robust, environment friendly and does not require use of hazardous organic solvents.

  7. Determining postmortem interval using glycoproteinous adhesion deposits by Balanus improvisus on human skeletal and dental remains.

    PubMed

    Bytheway, Joan A; Pustilnik, Stephen M

    2013-01-01

    An anthropological analysis was conducted on skeletal and dental remains brought to the Galveston County Medical Examiner's office. The skeletal remains were dry, fragmented, and absent of typical fluvial characteristics. During microscopic examination, semitransparent, circular objects were discovered on the dentition, the mandible, tibial plateau, and distal femur. The objects were glycoproteinous adhesions deposited by the acorn barnacle, Balanus improvisus. B. improvisus is an intertidal barnacle found in estuaries in Galveston Bay. Basal diameter of the adhesions on the dentition were significantly smaller than those found on the postcranial bones (p = 0.010), indicating two consecutive cohorts adhered to the bone and dentition. As settlement typically occurs once a year, this would indicate that the remains were in the fluvial environment for at least 375-410 days. It is important in geographic areas that have prevalent fluvial environments that human remains, particularly dentition, are microscopically examined for marine life evidence.

  8. Italy makes U-turn on nuclear power, but hurdles remain

    SciTech Connect

    2009-05-15

    A consortium consisting of ENEL and EDF in partnership with others including Edison, a major generator, and possibly a number of heavy industrial electricity users could invest in nuclear plants. But many technical, political, regulatory, and financial hurdles remain.

  9. View of Feature 2, the remains of the Geology/Change Room, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of Feature 2, the remains of the Geology/Change Room, view to the southeast - Orphan Lode Mine, North of West Rim Road between Powell Point and Maricopa Point, South Rim, Grand Canyon Village, Coconino County, AZ

  10. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-09

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  11. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  12. Workers' Compensation, Return to Work, and Lumbar Fusion for Spondylolisthesis.

    PubMed

    Anderson, Joshua T; Haas, Arnold R; Percy, Rick; Woods, Stephen T; Ahn, Uri M; Ahn, Nicholas U

    2016-01-01

    Lumbar fusion for spondylolisthesis is associated with consistent outcomes in the general population. However, workers' compensation is a risk factor for worse outcomes. Few studies have evaluated prognostic factors within this clinically distinct population. The goal of this study was to identify prognostic factors for return to work among patients with workers' compensation claims after fusion for spondylolisthesis. The authors used International Classification of Diseases, Ninth Revision, and Current Procedural Terminology codes to identify 686 subjects from the Ohio Bureau of Workers' Compensation who underwent fusion for spondylolisthesis from 1993 to 2013. Positive return to work status was recorded in patients who returned to work within 2 years of fusion and remained working for longer than 6 months. The criteria for return to work were met by 29.9% (n=205) of subjects. The authors used multivariate logistic regression analysis to identify prognostic factors for return to work. Negative preoperative prognostic factors for postoperative return to work included: out of work for longer than 1 year before fusion (P<.001; odds ratio [OR], 0.16); depression (P=.007; OR<0.01); long-term opioid analgesic use (P=.006; OR, 0.41); lumbar stenosis (P=.043; OR, 0.55); and legal representation (P=.042; OR, 0.63). Return to work rates associated with these factors were 9.7%, 0.0%, 10.0%, 29.2%, and 25.0%, respectively. If these subjects were excluded, the return to work rate increased to 60.4%. The 70.1% (n=481) of subjects who did not return to work had markedly worse outcomes, shown by higher medical costs, chronic opioid dependence, and higher rates of failed back syndrome, total disability, and additional surgery. Psychiatric comorbidity increased after fusion but was much higher in those who did not return to work. Future studies are needed to identify how to better facilitate return to work among similar patients with workers' compensation claims.

  13. [Total analysis of organic rubber additives].

    PubMed

    He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

    2010-03-01

    In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

  14. Cognitive bias in forensic anthropology: visual assessment of skeletal remains is susceptible to confirmation bias.

    PubMed

    Nakhaeizadeh, Sherry; Dror, Itiel E; Morgan, Ruth M

    2014-05-01

    An experimental study was designed to examine cognitive biases within forensic anthropological non-metric methods in assessing sex, ancestry and age at death. To investigate examiner interpretation, forty-one non-novice participants were semi randomly divided into three groups. Prior to conducting the assessment of the skeletal remains, two of the groups were given different extraneous contextual information regarding the sex, ancestry and age at death of the individual. The third group acted as a control group with no extraneous contextual information. The experiment was designed to investigate if the interpretation and conclusions of the skeletal remains would differ amongst participants within the three groups, and to assess whether the examiners would confirm or disagree with the given extraneous context when establishing a biological profile. The results revealed a significant biasing effect within the three groups, demonstrating a strong confirmation bias in the assessment of sex, ancestry and age at death. In assessment of sex, 31% of the participants in the control group concluded that the skeleton remains were male. In contrast, in the group that received contextual information that the remains were male, 72% concluded that the remains were male, and in the participant group where the context was that the remains were of a female, 0% of the participants concluded that the remains were male. Comparable results showing bias were found in assessing ancestry and age at death. These data demonstrate that cognitive bias can impact forensic anthropological non-metric methods on skeletal remains and affects the interpretation and conclusions of the forensic scientists. This empirical study is a step in establishing an evidence base approach for dealing with cognitive issues in forensic anthropological assessments, so as to enhance this valuable forensic science discipline.

  15. Job insecurity during recessions: effects on survivors’ work stress

    PubMed Central

    2013-01-01

    Background Previous studies show a variety of negative health consequences for the remaining workforce after downsizing events. This study examined self-reported work stress from 2009–2012 in the context of a large multi-site aluminum manufacturing company that underwent severe downsizing in 2009. Methods This study examined the association between work stress and working at a work site that underwent severe downsizing. We assessed the level of downsizing across thirty plants in 2009 and categorized seven as having undergone severe downsizing. We linked plant-level downsizing information to individual workers’ responses to an annual work engagement survey, which included three work stress questions. From 2009 to 2012 over 14, 000 employees were asked about their experience of work stress. Though the surveys were anonymous, the surveys captured employees’ demographic and employment characteristic as well as plant location. We used hierarchical logistic regressions to compare responses of workers at severely downsized plants to workers at all other plant while controlling for demographic and plant characteristics. Responses to the work stress questions and one control question were examined. Results In all yearly surveys salaried workers consistently reported having more work stress than hourly workers. There was no differential in work stress for workers at severely downsized plants in 2009. In 2010 to 2012, salaried workers who remained at severely downsized plants reported significantly higher work stress than salaried workers at all other plants across multiple work stress questions. Examination of the 2006 survey confirmed that there were no pre-existing differences in work stress among salaried employees working at plants that would eventually experience severe downsizing. In addition, there was no difference in responses to the control question at severely downsized plants. Conclusion Salaried workers at plants with high layoffs experienced more work

  16. Decent Work: A Psychological Perspective

    PubMed Central

    Blustein, David L.; Olle, Chad; Connors-Kellgren, Alice; Diamonti, A. J.

    2016-01-01

    This contribution, which serves as the lead article for the Research Topic entitled “From Meaning of Working to Meaningful Lives: The Challenges of Expanding Decent Work,” explores current challenges in the development and operationalization of decent work. Based on an initiative from the International Labor Organization [ILO] (1999) decent work represents an aspirational statement about the quality of work that should be available to all people who seek to work around the globe. Within recent years, several critiques have been raised about decent work from various disciplines, highlighting concerns about a retreat from the social justice ethos that had initially defined the concept. In addition, other scholars have observed that decent work has not included a focus on the role of meaning and purpose at work. To address these concerns, we propose that a psychological perspective can help to revitalize the decent work agenda by infusing a more specific focus on individual experiences and by reconnecting decent work to its social justice origins. As an illustration of the advantages of a psychological perspective, we explore the rise of precarious work and also connect the decent work agenda to the Psychology-of-Working Framework and Theory (Blustein, 2006; Duffy et al., 2016). PMID:27047430

  17. Uncertainty Quantification in Remaining Useful Life of Aerospace Components using State Space Models and Inverse FORM

    NASA Technical Reports Server (NTRS)

    Sankararaman, Shankar; Goebel, Kai

    2013-01-01

    This paper investigates the use of the inverse first-order reliability method (inverse- FORM) to quantify the uncertainty in the remaining useful life (RUL) of aerospace components. The prediction of remaining useful life is an integral part of system health prognosis, and directly helps in online health monitoring and decision-making. However, the prediction of remaining useful life is affected by several sources of uncertainty, and therefore it is necessary to quantify the uncertainty in the remaining useful life prediction. While system parameter uncertainty and physical variability can be easily included in inverse-FORM, this paper extends the methodology to include: (1) future loading uncertainty, (2) process noise; and (3) uncertainty in the state estimate. The inverse-FORM method has been used in this paper to (1) quickly obtain probability bounds on the remaining useful life prediction; and (2) calculate the entire probability distribution of remaining useful life prediction, and the results are verified against Monte Carlo sampling. The proposed methodology is illustrated using a numerical example.

  18. Reintegration of the regenerated and the remaining tissues during joint regeneration in the newt Cynops pyrrhogaster

    PubMed Central

    Inoue, Takeshi; Yamada, Shigehito

    2015-01-01

    Abstract Urodele amphibians, such as newts, can regenerate a functional limb, including joints, after amputation at any level along the proximal−distal axis of the limb. The blastema can regenerate the limb morphology largely independently of the stump after proximal−distal identity has been established, but the remaining and regenerated tissues must be structurally reintegrated (matched in size and shape). Here we used newt joint regeneration as a model to investigate reintegration, because a functionally interlocking joint requires structural integration between its opposing skeletal elements. After forelimbs were amputated at the elbow joint, the joint was regenerated between the remaining and regenerated skeletal elements. The regenerated cartilage was thick around the amputated joint to make a reciprocally interlocking joint structure with the remaining bone. Furthermore, during regeneration, the extracellular matrix of the remaining tissues was lost, suggesting that the remaining tissues might contribute to the morphogenesis of regenerating cartilage. Our results showed that the area of the regenerated cartilage matched the area of the apposed remaining cartilage, thus contributing to formation of a functional structure. PMID:27499865

  19. Reintegration of the regenerated and the remaining tissues during joint regeneration in the newt Cynops pyrrhogaster.

    PubMed

    Tsutsumi, Rio; Inoue, Takeshi; Yamada, Shigehito; Agata, Kiyokazu

    2015-02-01

    Urodele amphibians, such as newts, can regenerate a functional limb, including joints, after amputation at any level along the proximal-distal axis of the limb. The blastema can regenerate the limb morphology largely independently of the stump after proximal-distal identity has been established, but the remaining and regenerated tissues must be structurally reintegrated (matched in size and shape). Here we used newt joint regeneration as a model to investigate reintegration, because a functionally interlocking joint requires structural integration between its opposing skeletal elements. After forelimbs were amputated at the elbow joint, the joint was regenerated between the remaining and regenerated skeletal elements. The regenerated cartilage was thick around the amputated joint to make a reciprocally interlocking joint structure with the remaining bone. Furthermore, during regeneration, the extracellular matrix of the remaining tissues was lost, suggesting that the remaining tissues might contribute to the morphogenesis of regenerating cartilage. Our results showed that the area of the regenerated cartilage matched the area of the apposed remaining cartilage, thus contributing to formation of a functional structure.

  20. Taphonomic analysis of the hominin remains from Swabian Jura and their implications for the mortuary practices during the Upper Paleolithic

    NASA Astrophysics Data System (ADS)

    Sala, Nohemi; Conard, Nicholas

    2016-10-01

    The symbolic behavior of human beings usually is manifested in different ways such as figurative art, musical traditions, spoken language or complex funerary behavior. The Paleolithic sites of the Swabian Jura contain a rich archaeological record including the oldest evidence of musical instruments and figurative art which indicates complex cognitive abilities of the Paleolithic Homo sapiens that colonized Europe. Nevertheless, there is no evidence for burials in the Swabian caves during the Paleolithic. This raises questions regarding the kind of mortuary practices that existed in this region during the Paleolithic. In this paper, we address these questions from a taphonomic perspective by analyzing the hominin remains recovered in caves of the Swabian Jura. Whatever the funerary behavior was during the Early and Middle Upper Paleolithic, we have no evidence to document these practices. The Magdalenian hominin remains from Brillenhöhle, however, display anthropic modifications that have been hotly debated in the past. Our taphonomic analysis indicates that the assemblage displays traces of butchery similar to those recorded in the faunal remains. In addition to the cut marks, we have documented intentional breakage and human tooth marks, suggesting that the consumption of human corpses took place during the Magdalenian at Brillenhöhle. Similar anthropic modifications have also been documented in Magdalenian horizon at Hohle Fels. This suggests that the cannibalism practices during the Magdalenian were more common than previously expected during the Magdalenian in the Swabian Jura.