Science.gov

Sample records for additionally transmission electron

  1. Electronically controlled automatic transmission

    SciTech Connect

    Ohkubo, M.; Shiba, H.; Nakamura, K.

    1989-03-28

    This patent describes an electronically controlled automatic transmission having a manual valve working in connection with a manual shift lever, shift valves operated by solenoid valves which are driven by an electronic control circuit previously memorizing shift patterns, and a hydraulic circuit controlled by these manual valve and shift valves for driving brakes and a clutch in order to change speed. Shift patterns of 2-range and L-range, in addition to a shift pattern of D-range, are memorized previously in the electronic control circuit, an operation switch is provided which changes the shift pattern of the electronic control circuit to any shift pattern among those of D-range, 2-range and L-range at time of the manual shift lever being in a D-range position, a releasable lock mechanism is provided which prevents the manual shift lever from entering 2-range and L-range positions, and the hydraulic circuit is set to a third speed mode when the manual shift lever is in the D-range position. The circuit is set to a second speed mode when it is in the 2-range position, and the circuit is set to a first speed mode when it is in the L-range position, respectively, in case where the shift valves are not working.

  2. Liquid Cell Transmission Electron Microscopy.

    PubMed

    Liao, Hong-Gang; Zheng, Haimei

    2016-05-27

    Liquid cell transmission electron microscopy (TEM) has attracted significant interest in recent years. With nanofabricated liquid cells, it has been possible to image through liquids using TEM with subnanometer resolution, and many previously unseen materials dynamics have been revealed. Liquid cell TEM has been applied to many areas of research, ranging from chemistry to physics, materials science, and biology. So far, topics of study include nanoparticle growth and assembly, electrochemical deposition and lithiation for batteries, tracking and manipulation of nanoparticles, catalysis, and imaging of biological materials. In this article, we first review the development of liquid cell TEM and then highlight progress in various areas of research. In the study of nanoparticle growth, the electron beam can serve both as the illumination source for imaging and as the input energy for reactions. However, many other research topics require the control of electron beam effects to minimize electron beam damage. We discuss efforts to understand electron beam-liquid matter interactions. Finally, we provide a perspective on future challenges and opportunities in liquid cell TEM.

  3. Liquid Cell Transmission Electron Microscopy

    NASA Astrophysics Data System (ADS)

    Liao, Hong-Gang; Zheng, Haimei

    2016-05-01

    Liquid cell transmission electron microscopy (TEM) has attracted significant interest in recent years. With nanofabricated liquid cells, it has been possible to image through liquids using TEM with subnanometer resolution, and many previously unseen materials dynamics have been revealed. Liquid cell TEM has been applied to many areas of research, ranging from chemistry to physics, materials science, and biology. So far, topics of study include nanoparticle growth and assembly, electrochemical deposition and lithiation for batteries, tracking and manipulation of nanoparticles, catalysis, and imaging of biological materials. In this article, we first review the development of liquid cell TEM and then highlight progress in various areas of research. In the study of nanoparticle growth, the electron beam can serve both as the illumination source for imaging and as the input energy for reactions. However, many other research topics require the control of electron beam effects to minimize electron beam damage. We discuss efforts to understand electron beam-liquid matter interactions. Finally, we provide a perspective on future challenges and opportunities in liquid cell TEM.

  4. Aberration corrected Lorentz scanning transmission electron microscopy.

    PubMed

    McVitie, S; McGrouther, D; McFadzean, S; MacLaren, D A; O'Shea, K J; Benitez, M J

    2015-05-01

    We present results from an aberration corrected scanning transmission electron microscope which has been customised for high resolution quantitative Lorentz microscopy with the sample located in a magnetic field free or low field environment. We discuss the innovations in microscope instrumentation and additional hardware that underpin the imaging improvements in resolution and detection with a focus on developments in differential phase contrast microscopy. Examples from materials possessing nanometre scale variations in magnetisation illustrate the potential for aberration corrected Lorentz imaging as a tool to further our understanding of magnetism on this lengthscale.

  5. Low voltage transmission electron microscopy of graphene.

    PubMed

    Bachmatiuk, Alicja; Zhao, Jiong; Gorantla, Sandeep Madhukar; Martinez, Ignacio Guillermo Gonzalez; Wiedermann, Jerzy; Lee, Changgu; Eckert, Juergen; Rummeli, Mark Hermann

    2015-02-04

    The initial isolation of graphene in 2004 spawned massive interest in this two-dimensional pure sp(2) carbon structure due to its incredible electrical, optical, mechanical, and thermal effects. This in turn led to the rapid development of various characterization tools for graphene. Examples include Raman spectroscopy and scanning tunneling microscopy. However, the one tool with the greatest prowess for characterizing and studying graphene is the transmission electron microscope. State-of-the-art (scanning) transmission electron microscopes enable one to image graphene with atomic resolution, and also to conduct various other characterizations simultaneously. The advent of aberration correctors was timely in that it allowed transmission electron microscopes to operate with reduced acceleration voltages, so that damage to graphene is avoided while still providing atomic resolution. In this comprehensive review, a brief introduction is provided to the technical aspects of transmission electron microscopes relevant to graphene. The reader is then introduced to different specimen preparation techniques for graphene. The different characterization approaches in both transmission electron microscopy and scanning transmission electron microscopy are then discussed, along with the different aspects of electron diffraction and electron energy loss spectroscopy. The use of graphene for other electron microscopy approaches such as in-situ investigations is also presented.

  6. Transmission electron microscope CCD camera

    DOEpatents

    Downing, Kenneth H.

    1999-01-01

    In order to improve the performance of a CCD camera on a high voltage electron microscope, an electron decelerator is inserted between the microscope column and the CCD. This arrangement optimizes the interaction of the electron beam with the scintillator of the CCD camera while retaining optimization of the microscope optics and of the interaction of the beam with the specimen. Changing the electron beam energy between the specimen and camera allows both to be optimized.

  7. Characterization of Ultra High Temperature Ceramics via Transmission Electron Microscopy. Part 2: UHTCs sintered with addition of TaSi2

    DTIC Science & Technology

    2010-01-21

    addition of silicides , such as MoSi2,15–17 has positive effects on the densification and mechanical properties of borides and carbides, even at...interest because of the excellent and unique combination of properties which make them attractive candidates for high temperature applications where...solutions, which, in turn affect the high temperature properties . The control of secondary phases composition is therefore of paramount importance

  8. Transmission electron microscope studies of extraterrestrial materials

    NASA Technical Reports Server (NTRS)

    Keller, Lindsay P.

    1995-01-01

    Transmission Electron Microscopy, X-Ray spectrometry and electron-energy-loss spectroscopy are used to analyse carbon in interplanetary dust particles. Optical micrographs are shown depicting cross sections of the dust particles embedded in sulphur. Selected-area electron diffraction patterns are shown. Transmission Electron Microscope specimens of lunar soil were prepared using two methods: ion-milling and ultramicrotomy. A combination of high resolution TEM imaging and electron diffraction is used to characterize the opaque assemblages. The opaque assemblages analyzed in this study are dominated by ilmenite with lesser rutile and spinel exsolutions, and traces of Fe metal.

  9. Sunrise over Mars - electronic transmission

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Caption: 'Taken during the Viking Orbiter 1's 40th revolution of Mars, this electronically transmitted image shows sunrise over the tributary canyons of a high plateau region. The white areas are bright clouds of water ice.' As the sun rises over Noctis Labryinthus (the labyrinth of the night), bright clouds of water ice can be observed in and around the tributary canyons of this high plateau region of Mars. This color composite image, reconstructed from three individual black and white frames taken through violet, green, and orange filters, vividly shows the distribution of the clouds against the rust colored background of this Martian desert. The picture was reconstructed by JPL's Image Processing Laboratory using in-flight calibration data to correct the color balance. Scientists have puzzled why the clouds cling to the canyon areas and, only in certain areas, spill over onto the plateau surface. One possibility is that water which condensed during the previous afternoon in shaded eastern-facing slopes of the canyon floor is vaporized as the early morning sun falls on those same slopes. The area covered is about 10,000 square kilometers (4000 square miles), centered at 9 degrees South, 95 degrees West, and the large partial crater at lower right is Oudemans. The picture was taken on Viking Orbiter 1's 40th revolution of the planet. Photograph and caption published in Winds of Change, 75th Anniversary NASA publication (pages 108-109), by James Schultz.

  10. Transmission Electron Microscope Measures Lattice Parameters

    NASA Technical Reports Server (NTRS)

    Pike, William T.

    1996-01-01

    Convergent-beam microdiffraction (CBM) in thermionic-emission transmission electron microscope (TEM) is technique for measuring lattice parameters of nanometer-sized specimens of crystalline materials. Lattice parameters determined by use of CBM accurate to within few parts in thousand. Technique developed especially for use in quantifying lattice parameters, and thus strains, in epitaxial mismatched-crystal-lattice multilayer structures in multiple-quantum-well and other advanced semiconductor electronic devices. Ability to determine strains in indivdual layers contributes to understanding of novel electronic behaviors of devices.

  11. Ponderomotive phase plate for transmission electron microscopes

    DOEpatents

    Reed, Bryan W [Livermore, CA

    2012-07-10

    A ponderomotive phase plate system and method for controllably producing highly tunable phase contrast transfer functions in a transmission electron microscope (TEM) for high resolution and biological phase contrast imaging. The system and method includes a laser source and a beam transport system to produce a focused laser crossover as a phase plate, so that a ponderomotive potential of the focused laser crossover produces a scattering-angle-dependent phase shift in the electrons of the post-sample electron beam corresponding to a desired phase contrast transfer function.

  12. Atmospheric pressure scanning transmission electron microscopy.

    PubMed

    de Jonge, Niels; Bigelow, Wilbur C; Veith, Gabriel M

    2010-03-10

    Scanning transmission electron microscope (STEM) images of gold nanoparticles at atmospheric pressure have been recorded through a 0.36 mm thick mixture of CO, O2, and He. This was accomplished using a reaction cell consisting of two electron-transparent silicon nitride membranes. Gold nanoparticles of a full width at half-maximum diameter of 1.0 nm were visible above the background noise, and the achieved edge resolution was 0.4 nm in accordance with calculations of the beam broadening.

  13. 7 CFR 400.209 - Electronic transmission and receiving system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Electronic transmission and receiving system. 400.209... Contract-Standards for Approval § 400.209 Electronic transmission and receiving system. Any Contractor... Corporation approval of the electronic system as a condition to the electronic transmission and reception...

  14. 7 CFR 400.209 - Electronic transmission and receiving system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Electronic transmission and receiving system. 400.209... Contract-Standards for Approval § 400.209 Electronic transmission and receiving system. Any Contractor... Corporation approval of the electronic system as a condition to the electronic transmission and reception...

  15. 7 CFR 400.209 - Electronic transmission and receiving system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 6 2012-01-01 2012-01-01 false Electronic transmission and receiving system. 400.209... Contract-Standards for Approval § 400.209 Electronic transmission and receiving system. Any Contractor... Corporation approval of the electronic system as a condition to the electronic transmission and reception...

  16. 7 CFR 400.209 - Electronic transmission and receiving system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Electronic transmission and receiving system. 400.209... Contract-Standards for Approval § 400.209 Electronic transmission and receiving system. Any Contractor... Corporation approval of the electronic system as a condition to the electronic transmission and reception...

  17. TEBAL: Nanosculpting devices with electrons in a transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Drndic, Marija

    2008-03-01

    Manipulation of matter on the scale of atoms and molecules is an essential part of realizing the potential that nanotechnology has to offer. In this talk I will describe transmission electron beam ablation lithography (TEBAL), a method for fabricating nanostructures and fully integrated devices on silicon nitride membranes by nanosculpting evaporated metal films with electron beams. TEBAL works by controllably exposing materials to an intense and highly focused beam of 200 keV electrons inside the transmission electron microscope (TEM). The effect of electron irradiation can be used to controllably displace or ablate regions of the metal with resolution on the scale of tens of atoms per exposure. In situ TEM imaging of the ablation action with atomic resolution allows for real-time feedback control during fabrication. Specific examples presented here include the fabrication and characterization of nanogaps, nanorings, nanowires with tailored shapes and curvatures, and multi-terminal devices with nanoislands or nanopores between the terminals. These nanostructures are fabricated at precise locations on a chip and seamlessly integrated into large-scale circuitry. I will discuss how the combination of high resolution, geometrical control and yield make TEBAL attractive for many applications including nanoelectronics, superconductivity, nanofluidics and molecular (DNA) translocation studies through nanopore-based transistors. References: 1) M.D. Fischbein and M. Drndic, ``Sub-10 nm Device Fabrication in a Transmission Electron Microscope'', Nano Letters, 7 (5), 1329, 2007. 2) M. D. Fischbein and M. Drndic, ``Nanogaps by direct lithography for high-resolution imaging and electronic characterization of nanostructures'', Applied Physics Letters, 88 (6), 063116, 2006.

  18. Phase-contrast scanning transmission electron microscopy.

    PubMed

    Minoda, Hiroki; Tamai, Takayuki; Iijima, Hirofumi; Hosokawa, Fumio; Kondo, Yukihito

    2015-06-01

    This report introduces the first results obtained using phase-contrast scanning transmission electron microscopy (P-STEM). A carbon-film phase plate (PP) with a small center hole is placed in the condenser aperture plane so that a phase shift is introduced in the incident electron waves except those passing through the center hole. A cosine-type phase-contrast transfer function emerges when the phase-shifted scattered waves interfere with the non-phase-shifted unscattered waves, which passed through the center hole before incidence onto the specimen. The phase contrast resulting in P-STEM is optically identical to that in phase-contrast transmission electron microscopy that is used to provide high contrast for weak phase objects. Therefore, the use of PPs can enhance the phase contrast of the STEM images of specimens in principle. The phase shift resulting from the PP, whose thickness corresponds to a phase shift of π, has been confirmed using interference fringes displayed in the Ronchigram of a silicon single crystal specimen. The interference fringes were found to abruptly shift at the edge of the PP hole by π.

  19. Nonlinear transmission line based electron beam driver

    SciTech Connect

    French, David M.; Hoff, Brad W.; Tang Wilkin; Heidger, Susan; Shiffler, Don; Allen-Flowers, Jordan

    2012-12-15

    Gated field emission cathodes can provide short electron pulses without the requirement of laser systems or cathode heating required by photoemission or thermionic cathodes. The large electric field requirement for field emission to take place can be achieved by using a high aspect ratio cathode with a large field enhancement factor which reduces the voltage requirement for emission. In this paper, a cathode gate driver based on the output pulse train from a nonlinear transmission line is experimentally demonstrated. The application of the pulse train to a tufted carbon fiber field emission cathode generates short electron pulses. The pulses are approximately 2 ns in duration with emission currents of several mA, and the train contains up to 6 pulses at a frequency of 100 MHz. Particle-in-cell simulation is used to predict the characteristic of the current pulse train generated from a single carbon fiber field emission cathode using the same technique.

  20. Electronic automatic gear transmission control apparatus

    SciTech Connect

    Koshizawa, T.

    1989-04-25

    This patent describes an electronic automatic gear transmission control apparatus having a shift schedule map for commanding an optimum gear position based on a vehicle speed signal and an accelerator opening signal, the electronic automatic gear transmission control apparatus comprising: first means for comparing a gear position commanded by the shift schedule map with a present gear position; second means for effecting a gear shift to a gear position which is one gear position higher than the present gear position and for restraining a gear shift to the commanded gear position for a prescribed period of time, if the commanded gear position requires an upshift to a gear position which is two or more gear positions higher than the present gear position as a result of the comparison performed by the first means; and third means for holding the gear position which is one gear position higher than the present gear position until an accelerator pedal is depressed again, when the accelerator opening signal indicates an idling position while the gear shift up to the gear position which is one gear position higher than the present gear position, is being effected by the second means.

  1. Concurrent in situ ion irradiation transmission electron microscope

    DOE PAGES

    Hattar, K.; Bufford, D. C.; Buller, D. L.

    2014-08-29

    An in situ ion irradiation transmission electron microscope has been developed and is operational at Sandia National Laboratories. This facility permits high spatial resolution, real time observation of electron transparent samples under ion irradiation, implantation, mechanical loading, corrosive environments, and combinations thereof. This includes the simultaneous implantation of low-energy gas ions (0.8–30 keV) during high-energy heavy ion irradiation (0.8–48 MeV). In addition, initial results in polycrystalline gold foils are provided to demonstrate the range of capabilities.

  2. Characterization of nanomaterials with transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Anjum, D. H.

    2016-08-01

    The field of nanotechnology is about research and development on materials whose at least one dimension is in the range of 1 to 100 nanometers. In recent years, the research activity for developing nano-materials has grown exponentially owing to the fact that they offer better solutions to the challenges faced by various fields such as energy, food, and environment. In this paper, the importance of transmission electron microscopy (TEM) based techniques is demonstrated for investigating the properties of nano-materials. Specifically the nano-materials that are investigated in this report include gold nano-particles (Au-NPs), silver atom-clusters (Ag-ACs), tantalum single-atoms (Ta-SAs), carbon materials functionalized with iron cobalt (Fe-Co) NPs and titania (TiO2) NPs, and platinum loaded Ceria (Pt-CeO2) Nano composite. TEM techniques that are employed to investigate nano-materials include aberration corrected bright-field TEM (BF-TEM), high-angle dark-field scanning TEM (HAADF-STEM), electron energy-loss spectroscopy (EELS), and BF-TEM electron tomography (ET). With the help presented of results in this report, it is proved herein that as many TEM techniques as available in a given instrument are essential for a comprehensive nano-scale analysis of nanomaterials.

  3. Electron and hole transmission through superconductor — Normal metal interfaces

    NASA Astrophysics Data System (ADS)

    Gloos, Kurt; Tuuli, Elina

    2013-05-01

    We have investigated the transmission of electrons and holes through interfaces between superconducting aluminum ( T c = 1.2K) and various normal non-magnetic metals (copper, gold, palladium, platinum, and silver) using Andreev-reflection spectroscopy at T = 0.1K. We analysed the point contacts with the modified BTK theory that includes Dynes' lifetime as a fitting parameter Γ in addition to superconducting energy gap 2Δ and normal reflection described by Z. For contact areas from 1 nm2 to 10000nm2 the BTK Z parameter was 0.5, corresponding to transmission coefficients of about 80%, independent of the normal metal. The very small variation of Z indicates that the interfaces have a negligible dielectric tunneling barrier. Fermi surface mismatch does not account for the observed transmission coefficient.

  4. An additional step in the transmission of Yersinia pestis?

    PubMed Central

    Easterday, W Ryan; Kausrud, Kyrre L; Star, Bastiaan; Heier, Lise; Haley, Bradd J; Ageyev, Vladimir; Colwell, Rita R; Stenseth, Nils Chr

    2012-01-01

    Plague, caused by the bacterium Yersinia pestis, is a mammalian vector-borne disease, transmitted by fleas that serve as the vector between rodent hosts. For many pathogens, including Y. pestis, there are strong evolutionary pressures that lead to a reduction in ‘useless genes', with only those retained that reflect function in the specific environment inhabited by the pathogen. Genetic traits critical for survival and transmission between two environments, the rodent and the flea, are conserved in epizootic/epidemic plague strains. However, there are genes that remain conserved for which no function in the flea–rodent cycle has yet been observed, indicating an additional environment may exist in the transmission cycle of plague. Here, we present evidence for highly conserved genes that suggests a role in the persistence of Y. pestis after death of its host. Furthermore, maintenance of these genes points to Y. pestis traversing a post-mortem path between, and possibly within, epizootic periods and offering insight into mechanisms that may allow Y. pestis an alternative route of transmission in the natural environment. PMID:21833036

  5. High-resolution transmission electron microscopy: the ultimate nanoanalytical technique.

    PubMed

    Thomas, John Meurig; Midgley, Paul A

    2004-06-07

    To be able to determine the elemental composition and morphology of individual nanoparticles consisting of no more than a dozen or so atoms that weigh a few zeptograms (10(-21) g) is but one of the attainments of modern electron microscopy. With slightly larger specimens (embracing a few unit cells of the structure) their symmetry, crystallographic phase, unit-cell dimension, chemical composition and often the valence state (from parallel electron spectroscopic measurements) of the constituent atoms may also be determined using a scanning beam of electrons of ca. 0.5 nm diameter. Nowadays electron crystallography, which treats the digital data of electron diffraction (ED) and high-resolution transmission electron microscope (HRTEM) images of minute (ca. 10(-18)g) specimens in a quantitatively rigorous manner, solves hitherto unknown structures just as X-ray diffraction does with bulk single crystals. In addition, electron tomography (see cover photograph and its animation) enables a three-dimensional picture of the internal structure of minute objects, such as nanocatalysts in a single pore, as well as structural faults such as micro-fissures, to be constructed with a resolution of 1 nm from an angular series of two-dimensional (projected) images. Very recently (since this article was first written) a new meaning has been given to electron crystallography as a result of the spatio-temporal resolution of surface phenomena achieved on a femtosecond timescale.

  6. In Situ Electrochemical Transmission Electron Microscopy for Battery Research

    SciTech Connect

    Mehdi, Beata L.; Gu, Meng; Parent, Lucas R.; Xu, Wu; Nasybulin, Eduard N.; Chen, Xilin; Unocic, Raymond R.; Xu, Pinghong; Welch, David A.; Abellan, Patricia; Zhang, Jiguang; Liu, Jun; Wang, Chong M.; Arslan, Ilke; Evans, James E.; Browning, Nigel D.

    2014-04-01

    The recent development of in situ liquid stages for (scanning) transmission electron microscopes now makes it possible for us to study the details of electrochemical processes under operando conditions. As electrochemical processes are complex, care must be taken to calibrate the system before any in situ/operando observations. In addition, as the electron beam can cause effects that look similar to electrochemical processes at the electrolyte/electrode interface, an understanding of the role of the electron beam in modifying the operando observations must also be understood. In this paper we describe the design, assembly, and operation of an in situ electrochemical cell, paying particular attention to the method for controlling and quantifying the experimental parameters. The use of this system is then demonstrated for the lithiation/delithiation of silicon nanowires.

  7. In-situ electrochemical transmission electron microscopy for battery research.

    PubMed

    Mehdi, B Layla; Gu, Meng; Parent, Lucas R; Xu, Wu; Nasybulin, Eduard N; Chen, Xilin; Unocic, Raymond R; Xu, Pinghong; Welch, David A; Abellan, Patricia; Zhang, Ji-Guang; Liu, Jun; Wang, Chong-Min; Arslan, Ilke; Evans, James; Browning, Nigel D

    2014-04-01

    The recent development of in-situ liquid stages for (scanning) transmission electron microscopes now makes it possible for us to study the details of electrochemical processes under operando conditions. As electrochemical processes are complex, care must be taken to calibrate the system before any in-situ/operando observations. In addition, as the electron beam can cause effects that look similar to electrochemical processes at the electrolyte/electrode interface, an understanding of the role of the electron beam in modifying the operando observations must also be understood. In this paper we describe the design, assembly, and operation of an in-situ electrochemical cell, paying particular attention to the method for controlling and quantifying the experimental parameters. The use of this system is then demonstrated for the lithiation/delithiation of silicon nanowires.

  8. 8 CFR 217.7 - Electronic data transmission requirement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Electronic data transmission requirement. 217.7 Section 217.7 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS VISA WAIVER PROGRAM § 217.7 Electronic data transmission requirement. (a) An alien who applies...

  9. 8 CFR 217.7 - Electronic data transmission requirement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Electronic data transmission requirement. 217.7 Section 217.7 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS VISA WAIVER PROGRAM § 217.7 Electronic data transmission requirement. (a) An alien who applies...

  10. 8 CFR 217.7 - Electronic data transmission requirement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Electronic data transmission requirement. 217.7 Section 217.7 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS VISA WAIVER PROGRAM § 217.7 Electronic data transmission requirement. (a) An alien who applies...

  11. 8 CFR 217.7 - Electronic data transmission requirement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Electronic data transmission requirement. 217.7 Section 217.7 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS VISA WAIVER PROGRAM § 217.7 Electronic data transmission requirement. (a) An alien who applies...

  12. 8 CFR 217.7 - Electronic data transmission requirement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Electronic data transmission requirement. 217.7 Section 217.7 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS VISA WAIVER PROGRAM § 217.7 Electronic data transmission requirement. (a) An alien who applies...

  13. Transmission Kikuchi diffraction and transmission electron forescatter imaging of electropolished and FIB manufactured TEM specimens

    SciTech Connect

    Zieliński, W. Płociński, T.; Kurzydłowski, K.J.

    2015-06-15

    We present a study of the efficiency of the utility of scanning electron microscope (SEM)-based transmission methods for characterizing grain structure in thinned bulk metals. Foils of type 316 stainless steel were prepared by two methods commonly used for transmission electron microscopy — double-jet electropolishing and focused ion beam milling. A customized holder allowed positioning of the foils in a configuration appropriate for both transmission electron forward scatter diffraction, and for transmission imaging by the use of a forescatter detector with two diodes. We found that both crystallographic orientation maps and dark-field transmitted images could be obtained for specimens prepared by either method. However, for both methods, preparation-induced artifacts may affect the quality or accuracy of transmission SEM data, especially those acquired by the use of transmission Kikuchi diffraction. Generally, the quality of orientation data was better for specimens prepared by electropolishing, due to the absence of ion-induced damage. - Highlights: • The transmission imaging and diffraction techniques are emerging in scanning electron microscopy (SEM) as promising new field of materials characterization. • The manuscript titled: “Transmission Kikuchi Diffraction and Transmission Electron Forescatter Imaging of Electropolished and FIB Manufactured TEM Specimens” documents how different specimen thinning procedures can effect efficiency of transmission Kikuchi diffraction and transmission electron forescatter imaging. • The abilities to make precision crystallographic orientation maps and dark-field images in transmission was studied on electropolished versus focus ion beam manufactured TEM specimens. • Depending on the need, electropolished and focused ion beam technique may produce suitable specimens for transmission imaging and diffraction in SEM.

  14. A transmission electron microscopic study of the Bethany iron meteorite

    NASA Astrophysics Data System (ADS)

    Hasan, F.; Axon, H. J.

    1985-02-01

    The Bethany iron meteorite, which is a part of the Gibeon shower, is a fine octahedrite with zoned plessite fields of various sizes. The optically irresolvable microstructural details inside the plessitic fields have been studied by transmission electron microscopy, and the crystallographic relationships between the primary kamacite (alpha) and the parent taenite (gamma), and between the alpha and gamma particles in the coarse plessite, have been examined using electron diffraction. In the case of primary kamacite, the orientation-relationship with gamma was close to the Nishiyama-Wasserman relationship, whereas, for the plessitic alpha, the orientation-relationship with gamma was close to Kurdjumov-Sachs. It was also found that the (111)-gamma and (110)-alpha planes were not strictly parallel. Additionally, measurements of the composition profile through the zoned plessite have been made using STEM microanalysis technique, and related to microstructure.

  15. Transmission Electron Microscopy of Itokawa Regolith Grains

    NASA Technical Reports Server (NTRS)

    Keller, Lindsay P.; Berger, E. L.

    2013-01-01

    Introduction: In a remarkable engineering achievement, the JAXA space agency successfully recovered the Hayabusa space-craft in June 2010, following a non-optimal encounter and sur-face sampling mission to asteroid 25143 Itokawa. These are the first direct samples ever obtained and returned from the surface of an asteroid. The Hayabusa samples thus present a special op-portunity to directly investigate the evolution of asteroidal sur-faces, from the development of the regolith to the study of the effects of space weathering. Here we report on our preliminary TEM measurements on two Itokawa samples. Methods: We were allocated particles RA-QD02-0125 and RA-QD02-0211. Both particles were embedded in low viscosity epoxy and thin sections were prepared using ultramicrotomy. High resolution images and electron diffraction data were ob-tained using a JEOL 2500SE 200 kV field-emission scanning-transmission electron microscope. Quantitative maps and anal-yses were obtained using a Thermo thin-window energy-dispersive x-ray (EDX) spectrometer. Results: Both particles are olivine-rich (Fo70) with µm-sized inclusions of FeS and have microstructurally complex rims. Par-ticle RA-QD02-0125 is rounded and has numerous sub-µm grains attached to its surface including FeS, albite, olivine, and rare melt droplets. Solar flare tracks have not been observed, but the particle is surrounded by a continuous 50 nm thick, stuctur-ally disordered rim that is compositionally similar to the core of the grain. One of the surface adhering grains is pyrrhotite show-ing a S-depleted rim (8-10 nm thick) with nanophase Fe metal grains (<5 nm) decorating the outermost surface. The pyrrhotite displays a complex superstructure in its core that is absent in the S-depleted rim. Particle RA-QD02-0211 contains solar flare particle tracks (2x109 cm-2) and shows a structurally disordered rim 100 nm thick. The track density corresponds to a surface exposure of 103-104 years based on the track production rate

  16. In situ transmission electron microscopy of electron-beam induced damage process in nuclear grade graphite

    NASA Astrophysics Data System (ADS)

    Karthik, C.; Kane, J.; Butt, D. P.; Windes, W. E.; Ubic, R.

    2011-05-01

    Atomic level processes involved in the swelling and crack-closing in nuclear grade graphite under electron irradiation have been observed in real-time using transmission electron microscopy. Noise-filtered lattice images show the formation of vacancy loops, interstitial loops and resulting dislocations with unprecedented clarity. The dislocation dipoles formed via vacancy loops were found to undergo climb resulting in extra basal planes. Concurrent EELS studies showed a reduction in the atomic density because of the breakage of hexagonal carbon rings. The formation of new basal planes via dislocation climb in addition to the bending/breaking of basal planes leads to swelling and closing of micro-cracks.

  17. Evaluation of oleic acid as additive in automatic transmission fluid

    NASA Astrophysics Data System (ADS)

    Khairuldean, A. K.; Ing, T. Chiong; Bambang, S.; Baharin, T. Kamarul; Wira, J. Y.; Syahrullail, S.

    2012-06-01

    Transmission fluid has already being monopolized by petroleum oil over these years, either mineral oil or synthetic oil, the base oil originated from the crude oil. Currently, with environmental issue becomes globally concerned, it is time to move toward green technology and more to the sustainability, resource renewability and biodegradability. To respond to this challenge, a research focusing on development of environmental friendly lubricant for Automatic Transmission (AT) is conducted. In this paper, the Refined, Bleached, and Deodorized Palm-Olein (RBDPO) mixed with the Automatic Transmission Fluid (ATF), is developed and tested. The research focuses on some parameters such as anti wear and friction coefficient characteristics. The test is conducted using four ball wear tester machine to analyze anti wear of the lubricant as well as to simulate the sliding surface of gear operation inside the transmission which is the most critical operation condition for the lubricant. The method of testing is based on ASTM D4172 Test B condition for wear measurement. By comparing the experimental results between mixed lubricants and the commercial ATF, it can be seen that the palm olein is very potential to become a base oil for transmission lubricant in the future due to its promising performance of the tested physical properties.

  18. Image Resolution in Scanning Transmission Electron Microscopy

    SciTech Connect

    Pennycook, S. J.; Lupini, A.R.

    2008-06-26

    Digital images captured with electron microscopes are corrupted by two fundamental effects: shot noise resulting from electron counting statistics and blur resulting from the nonzero width of the focused electron beam. The generic problem of computationally undoing these effects is called image reconstruction and for decades has proved to be one of the most challenging and important problems in imaging science. This proposal concerned the application of the Pixon method, the highest-performance image-reconstruction algorithm yet devised, to the enhancement of images obtained from the highest-resolution electron microscopes in the world, now in operation at Oak Ridge National Laboratory.

  19. Standardless atom counting in scanning transmission electron microscopy.

    PubMed

    LeBeau, James M; Findlay, Scott D; Allen, Leslie J; Stemmer, Susanne

    2010-11-10

    We demonstrate that high-angle annular dark-field imaging in scanning transmission electron microscopy allows for quantification of the number and location of all atoms in a three-dimensional, crystalline, arbitrarily shaped specimen without the need for a calibration standard. We show that the method also provides for an approach to directly measure the finite effective source size of a scanning transmission electron microscope.

  20. Fluorescence-integrated transmission electron microscopy images: integrating fluorescence microscopy with transmission electron microscopy.

    PubMed

    Sims, Paul A; Hardin, Jeff D

    2007-01-01

    This chapter describes high-pressure freezing (HPF) techniques for correlative light and electron microscopy on the same sample. Laser scanning confocal microscopy (LSCM) is exploited for its ability to collect fluorescent, as well as transmitted and back scattered light (BSL) images at the same time. Fluorescent information from a whole mount (preembedding) or from thin sections (post-embedding) can be displayed as a color overlay on transmission electron microscopy (TEM) images. Fluorescence-integrated TEM (F-TEM) images provide a fluorescent perspective to TEM images. The pre-embedding method uses a thin two-part agarose pad to immobilize live Caenorhabditis elegans embryos for LSCM, HPF, and TEM. Pre-embedding F-TEM images display fluorescent information collected from a whole mount of live embryos onto all thin sections collected from that sample. In contrast, the postembedding method uses HPF and freeze substitution with 1% paraformaldehyde in 95% ethanol followed by low-temperature embedding in methacrylate resin. This procedure preserves the structure and function of green fluorescent protein (GFP) as determined by immunogold labeling of GFP, when compared with GFP expression, both demonstrated in the same thin section.

  1. Electron transmission through a class of anthracene aldehyde molecules

    NASA Astrophysics Data System (ADS)

    Petreska, Irina; Ohanesjan, Vladimir; Pejov, Ljupco; Kocarev, Ljupco

    2016-03-01

    Transmission of electrons via metal-molecule-metal junctions, involving rotor-stator anthracene aldehyde molecules is investigated. Two model barriers having input parameters evaluated from accurate ab initio calculations are proposed and the transmission coefficients are obtained by using the quasiclassical approximation. Transmission coefficients further enter in the integral for the net current, utilizing Simmons' method. Conformational dependence of the tunneling processes is evident and the presence of the side groups enhances the functionality of the future single-molecule based electronic devices.

  2. Image resolution and sensitivity in an environmental transmission electron microscope.

    PubMed

    Jinschek, J R; Helveg, S

    2012-11-01

    An environmental transmission electron microscope provides unique means for the atomic-scale exploration of nanomaterials during the exposure to a reactive gas environment. Here we examine conditions to obtain such in situ observations in the high-resolution transmission electron microscopy (HRTEM) mode with an image resolution of 0.10nm. This HRTEM image resolution threshold is mapped out under different gas conditions, including gas types and pressures, and under different electron optical settings, including electron beam energies, doses and dose-rates. The 0.10nm resolution is retainable for H(2) at 1-10mbar. Even for N(2), the 0.10nm resolution threshold is reached up to at least 10mbar. The optimal imaging conditions are determined by the electron beam energy and the dose-rate as well as an image signal-to-noise (S/N) ratio that is consistent with Rose's criterion of S/N≥5. A discussion on the electron-gas interactions responsible for gas-induced resolution deterioration is given based on interplay with complementary electron diffraction (ED), scanning transmission electron microscopy (STEM) as well as electron energy loss spectroscopy (EELS) data.

  3. Bespoke contrast-matched diblock copolymer nanoparticles enable the rational design of highly transparent Pickering double emulsions† †Electronic supplementary information (ESI) available: GPC chromatograms, additional transmission electron micrographs, digital photographs, visible absorption spectra and laser diffraction data, further optical and fluorescence micrographs. See DOI: 10.1039/c6nr03856e Click here for additional data file.

    PubMed Central

    Thompson, Kate L.; Derry, Matthew J.; Warren, Nicholas J.; Ratcliffe, Liam P. D.; Williams, Clive N.; Brown, Steven L.

    2016-01-01

    We report the preparation of highly transparent oil-in-water Pickering emulsions using contrast-matched organic nanoparticles. This is achieved via addition of judicious amounts of either sucrose or glycerol to an aqueous dispersion of poly(glycerol monomethacrylate)56–poly(2,2,2-trifluoroethyl methacrylate)500 [PGMA–PTFEMA] diblock copolymer nanoparticles prior to high shear homogenization with an equal volume of n-dodecane. The resulting Pickering emulsions comprise polydisperse n-dodecane droplets of 20–100 μm diameter and exhibit up to 96% transmittance across the visible spectrum. In contrast, control experiments using non-contrast-matched poly(glycerol monomethacrylate)56–poly(benzyl methacrylate)300 [PGMA56–PBzMA300] diblock copolymer nanoparticles as a Pickering emulsifier only produced conventional highly turbid emulsions. Thus contrast-matching of the two immiscible phases is a necessary but not sufficient condition for the preparation of highly transparent Pickering emulsions: it is essential to use isorefractive nanoparticles in order to minimize light scattering. Furthermore, highly transparent oil-in-water-in-oil Pickering double emulsions can be obtained by homogenizing the contrast-matched oil-in-water Pickering emulsion prepared using the PGMA56–PTFEMA500 nanoparticles with a contrast-matched dispersion of hydrophobic poly(lauryl methacrylate)39–poly(2,2,2-trifluoroethyl methacrylate)800 [PLMA39–PTFEMA800] diblock copolymer nanoparticles in n-dodecane. Finally, we show that an isorefractive oil-in-water Pickering emulsion enables fluorescence spectroscopy to be used to monitor the transport of water-insoluble small molecules (pyrene and benzophenone) between n-dodecane droplets. Such transport is significantly less efficient than that observed for the equivalent isorefractive surfactant-stabilized emulsion. Conventional turbid emulsions do not enable such a comparison to be made because the intense light scattering leads to

  4. Power electronics in electric utilities: HVDC power transmission systems

    SciTech Connect

    Nozari, F.; Patel, H.S.

    1988-04-01

    High Voltage Direct Current (HVDC) power transmission systems constitute an important application of power electronics technology. This paper reviews salient aspects of this growing industry. The paper summarizes the history of HVDC transmission and discusses the economic and technical reasons responsible for development of HVDC systems. The paper also describes terminal design and basic configurations of HVDC systems, as well as major equipments of HVDC transmission system. In this regard, the state-of-the-art technology in the equipments constructions are discussed. Finally, the paper reviews future developments in the HVDC transmission systems, including promising technologies, such as multiterminal configurations, Gate Turn-Off (GTO) devices, forced commutation converters, and new advances in control electronics.

  5. Analysis on electronic control unit of continuously variable transmission

    NASA Astrophysics Data System (ADS)

    Cao, Shuanggui

    Continuously variable transmission system can ensure that the engine work along the line of best fuel economy, improve fuel economy, save fuel and reduce harmful gas emissions. At the same time, continuously variable transmission allows the vehicle speed is more smooth and improves the ride comfort. Although the CVT technology has made great development, but there are many shortcomings in the CVT. The CVT system of ordinary vehicles now is still low efficiency, poor starting performance, low transmission power, and is not ideal controlling, high cost and other issues. Therefore, many scholars began to study some new type of continuously variable transmission. The transmission system with electronic systems control can achieve automatic control of power transmission, give full play to the characteristics of the engine to achieve optimal control of powertrain, so the vehicle is always traveling around the best condition. Electronic control unit is composed of the core processor, input and output circuit module and other auxiliary circuit module. Input module collects and process many signals sent by sensor and , such as throttle angle, brake signals, engine speed signal, speed signal of input and output shaft of transmission, manual shift signals, mode selection signals, gear position signal and the speed ratio signal, so as to provide its corresponding processing for the controller core.

  6. Cryo-scanning transmission electron tomography of vitrified cells.

    PubMed

    Wolf, Sharon Grayer; Houben, Lothar; Elbaum, Michael

    2014-04-01

    Cryo-electron tomography (CET) of fully hydrated, vitrified biological specimens has emerged as a vital tool for biological research. For cellular studies, the conventional imaging modality of transmission electron microscopy places stringent constraints on sample thickness because of its dependence on phase coherence for contrast generation. Here we demonstrate the feasibility of using scanning transmission electron microscopy for cryo-tomography of unstained vitrified specimens (CSTET). We compare CSTET and CET for the imaging of whole bacteria and human tissue culture cells, finding favorable contrast and detail in the CSTET reconstructions. Particularly at high sample tilts, the CSTET signals contain more informative data than energy-filtered CET phase contrast images, resulting in improved depth resolution. Careful control over dose delivery permits relatively high cumulative exposures before the onset of observable beam damage. The increase in acceptable specimen thickness broadens the applicability of electron cryo-tomography.

  7. Quantification of the Information Limit of Transmission Electron Microscopes

    SciTech Connect

    Barthel, J.; Thust, A.

    2008-11-14

    The resolving power of high-resolution transmission electron microscopes is characterized by the information limit, which reflects the size of the smallest object detail observable with a particular instrument. We introduce a highly accurate measurement method for the information limit, which is suitable for modern aberration-corrected electron microscopes. An experimental comparison with the traditionally applied Young's fringe method yields severe discrepancies and confirms theoretical considerations according to which the Young's fringe method does not reveal the information limit.

  8. Direct observations of atomic diffusion by scanning transmission electron microscopy

    PubMed Central

    Isaacson, M.; Kopf, D.; Utlaut, M.; Parker, N. W.; Crewe, A. V.

    1977-01-01

    The feasibility of using a high-resolution scanning transmission electron microscope to study the diffusion of heavy atoms on thin film substrates of low atomic number has been investigated. We have shown that it is possible to visualize the diffusion of individual uranium atoms adsorbed to thin carbon film substrates and that the observed motion of the atoms does not appear to be induced by the incident electron beam. Images PMID:16592396

  9. Highlighting material structure with transmission electron diffraction correlation coefficient maps.

    PubMed

    Kiss, Ákos K; Rauch, Edgar F; Lábár, János L

    2016-04-01

    Correlation coefficient maps are constructed by computing the differences between neighboring diffraction patterns collected in a transmission electron microscope in scanning mode. The maps are shown to highlight material structural features like grain boundaries, second phase particles or dislocations. The inclination of the inner crystal interfaces are directly deduced from the resulting contrast.

  10. In situ nanoindentation in a transmission electron microscope

    SciTech Connect

    Minor, Andrew M.

    2002-01-01

    This dissertation presents the development of the novel mechanical testing technique of in situ nanoindentation in a transmission electron microscope (TEM). This technique makes it possible to simultaneously observe and quantify the mechanical behavior of nano-scale volumes of solids.

  11. Nanowire growth kinetics in aberration corrected environmental transmission electron microscopy

    SciTech Connect

    Chou, Yi -Chia; Panciera, Federico; Reuter, Mark C.; Stach, Eric A.; Ross, Frances M.

    2016-03-15

    Here, we visualize atomic level dynamics during Si nanowire growth using aberration corrected environmental transmission electron microscopy, and compare with lower pressure results from ultra-high vacuum microscopy. We discuss the importance of higher pressure observations for understanding growth mechanisms and describe protocols to minimize effects of the higher pressure background gas.

  12. Metals on BN Studied by High Resolution Transmission Electron Microscopy

    NASA Astrophysics Data System (ADS)

    Bangert, U.; Zan, R.; Ramasse, Q.; Jalil, Rashid; Riaz, Ibstam; Novoselov, K. S.

    2012-07-01

    Metal impurities, gold and nickel, have been deliberately introduced into boron-nitride (BN) sheets. The structural and topographic properties of doped BN have been studied by aberration corrected scanning transmission electron microscopy (STEM). Analysis revealed that metal atoms cluster preferentially in/on contaminated areas. The metal coverage on BN is almost the same for the same evaporated amount of 1 Å.

  13. Writing silica structures in liquid with scanning transmission electron microscopy.

    PubMed

    van de Put, Marcel W P; Carcouët, Camille C M C; Bomans, Paul H H; Friedrich, Heiner; de Jonge, Niels; Sommerdijk, Nico A J M

    2015-02-04

    Silica nanoparticles are imaged in solution with scanning transmission electron microscopy (STEM) using a liquid cell with silicon nitride (SiN) membrane windows. The STEM images reveal that silica structures are deposited in well-defined patches on the upper SiN membranes upon electron beam irradiation. The thickness of the deposits is linear with the applied electron dose. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrate that the deposited patches are a result of the merging of the original 20 nm-diameter nanoparticles, and that the related surface roughness depends on the electron dose rate used. Using this approach, sub-micrometer scale structures are written on the SiN in liquid by controlling the electron exposure as function of the lateral position.

  14. Foucault imaging by using non-dedicated transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Taniguchi, Yoshifumi; Matsumoto, Hiroaki; Harada, Ken

    2012-08-01

    An electron optical system for observing Foucault images was constructed using a conventional transmission electron microscope without any special equipment for Lorentz microscopy. The objective lens was switched off and an electron beam was converged by a condenser optical system to the crossover on the selected area aperture plane. The selected area aperture was used as an objective aperture to select the deflected beam for Foucault mode, and the successive image-forming lenses were controlled for observation of the specimen images. The irradiation area on the specimen was controlled by selecting the appropriate diameter of the condenser aperture.

  15. High-resolution low-dose scanning transmission electron microscopy.

    PubMed

    Buban, James P; Ramasse, Quentin; Gipson, Bryant; Browning, Nigel D; Stahlberg, Henning

    2010-01-01

    During the past two decades instrumentation in scanning transmission electron microscopy (STEM) has pushed toward higher intensity electron probes to increase the signal-to-noise ratio of recorded images. While this is suitable for robust specimens, biological specimens require a much reduced electron dose for high-resolution imaging. We describe here protocols for low-dose STEM image recording with a conventional field-emission gun STEM, while maintaining the high-resolution capability of the instrument. Our findings show that a combination of reduced pixel dwell time and reduced gun current can achieve radiation doses comparable to low-dose TEM.

  16. Transmission of electrons inside the cryogenic pumps of ITER injector

    SciTech Connect

    Veltri, P. Sartori, E.

    2016-02-15

    Large cryogenic pumps are installed in the vessel of large neutral beam injectors (NBIs) used to heat the plasma in nuclear fusion experiments. The operation of such pumps can be compromised by the presence of stray secondary electrons that are generated along the beam path. In this paper, we present a numerical model to analyze the propagation of the electrons inside the pump. The aim of the study is to quantify the power load on the active pump elements, via evaluation of the transmission probabilities across the domain of the pump. These are obtained starting from large datasets of particle trajectories, obtained by numerical means. The transmission probability of the electrons across the domain is calculated for the NBI of the ITER and for its prototype Megavolt ITer Injector and Concept Advancement (MITICA) and the results are discussed.

  17. Quantitative high-resolution transmission electron microscopy of single atoms.

    PubMed

    Gamm, Björn; Blank, Holger; Popescu, Radian; Schneider, Reinhard; Beyer, André; Gölzhäuser, Armin; Gerthsen, Dagmar

    2012-02-01

    Single atoms can be considered as the most basic objects for electron microscopy to test the microscope performance and basic concepts for modeling image contrast. In this work high-resolution transmission electron microscopy was applied to image single platinum, molybdenum, and titanium atoms in an aberration-corrected transmission electron microscope. The atoms are deposited on a self-assembled monolayer substrate that induces only negligible contrast. Single-atom contrast simulations were performed on the basis of Weickenmeier-Kohl and Doyle-Turner form factors. Experimental and simulated image intensities are in quantitative agreement on an absolute intensity scale, which is provided by the vacuum image intensity. This demonstrates that direct testing of basic properties such as form factors becomes feasible.

  18. Secondary electron imaging of monolayer materials inside a transmission electron microscope

    SciTech Connect

    Cretu, Ovidiu Lin, Yung-Chang; Suenaga, Kazutomo

    2015-08-10

    A scanning transmission electron microscope equipped with a backscattered and secondary electron detector is shown capable to image graphene and hexagonal boron nitride monolayers. Secondary electron contrasts of the two lightest monolayer materials are clearly distinguished from the vacuum level. A signal difference between these two materials is attributed to electronic structure differences, which will influence the escape probabilities of the secondary electrons. Our results show that the secondary electron signal can be used to distinguish between the electronic structures of materials with atomic layer sensitivity, enhancing its applicability as a complementary signal in the analytical microscope.

  19. Interaction of electrons with light metal hydrides in the transmission electron microscope.

    PubMed

    Wang, Yongming; Wakasugi, Takenobu; Isobe, Shigehito; Hashimoto, Naoyuki; Ohnuki, Somei

    2014-12-01

    Transmission electron microscope (TEM) observation of light metal hydrides is complicated by the instability of these materials under electron irradiation. In this study, the electron kinetic energy dependences of the interactions of incident electrons with lithium, sodium and magnesium hydrides, as well as the constituting element effect on the interactions, were theoretically discussed, and electron irradiation damage to these hydrides was examined using in situ TEM. The results indicate that high incident electron kinetic energy helps alleviate the irradiation damage resulting from inelastic or elastic scattering of the incident electrons in the TEM. Therefore, observations and characterizations of these materials would benefit from increased, instead decreased, TEM operating voltage.

  20. Facilities for in situ ion beam studies in transmission electron microscopes

    SciTech Connect

    Allen, C.W.; Ohnuki, S.; Takahashi, H.

    1993-08-01

    Interfacing an ion accelerator to a transmission electron microscope (TEM) allows the analytical functions of TEM imaging and electron diffraction from very small regions to be employed during ion-irradiation effects studies. At present there are ten such installations in Japan, one in France and one in the USA. General specifications of facilities which are operational in 1993 are summarized, and additional facilities which are planned or being proposed are briefly described.

  1. Electron-beam irradiation induced conductivity in ZnS nanowires as revealed by in situ transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Liu, Baodan; Bando, Yoshio; Wang, Mingsheng; Zhi, Chunyi; Fang, Xiaosheng; Tang, Chengchun; Mitome, Masanori; Golberg, Dmitri

    2009-08-01

    Electron transport variations in individual ZnS nanowires synthesized through a chemical vapor deposition process were in situ studied in transmission electron microscope under convergent electron-beam irradiation (EBI). It was found that the transport can dramatically be enhanced using proper irradiation conditions. The conductivity mechanism was revealed based on a detailed study of microstructure and composition evolutions under irradiation. EBI-induced Zn-rich domains' appearance and related O doping were mainly responsible for the conductivity improvements. First-principles theoretical calculations additionally indicated that the generation of midbands within a ZnS band gap might also contribute to the improved conductivity.

  2. In situ formation of bismuth nanoparticles through electron-beam irradiation in a transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Sepulveda-Guzman, S.; Elizondo-Villarreal, N.; Ferrer, D.; Torres-Castro, A.; Gao, X.; Zhou, J. P.; Jose-Yacaman, M.

    2007-08-01

    In this work, bismuth nanoparticles were synthesized when a precursor, sodium bismuthate, was exposed to an electron beam at room temperature in a transmission electron microscope (TEM). The irradiation effects were investigated in situ using selected-area electron diffraction, high-resolution transmission electron microscopy and x-ray energy dispersive spectroscopy. After the electron irradiation, bismuth nanoparticles with a rhombohedral structure and diameter of 6 nm were observed. The average particle size increased with the irradiation time. The electron-induced reduction is attributed to the desorption of oxygen ions. This method offers a one-step route to synthesize bismuth nanoparticles using electron irradiation, and the particle size can be controlled by the irradiation time.

  3. Electron-beam-induced ferroelectric domain behavior in the transmission electron microscope: Toward deterministic domain patterning

    NASA Astrophysics Data System (ADS)

    Hart, James L.; Liu, Shi; Lang, Andrew C.; Hubert, Alexander; Zukauskas, Andrius; Canalias, Carlota; Beanland, Richard; Rappe, Andrew M.; Arredondo, Miryam; Taheri, Mitra L.

    2016-11-01

    We report on transmission electron microscope beam-induced ferroelectric domain nucleation and motion. While previous observations of this phenomenon have been reported, a consistent theory explaining induced domain response is lacking, and little control over domain behavior has been demonstrated. We identify positive sample charging, a result of Auger and secondary electron emission, as the underlying mechanism driving domain behavior. By converging the electron beam to a focused probe, we demonstrate controlled nucleation of nanoscale domains. Molecular dynamics simulations performed are consistent with experimental results, confirming positive sample charging and reproducing the result of controlled domain nucleation. Furthermore, we discuss the effects of sample geometry and electron irradiation conditions on induced domain response. These findings elucidate past reports of electron beam-induced domain behavior in the transmission electron microscope and provide a path towards more predictive, deterministic domain patterning through electron irradiation.

  4. Practical aspects of monochromators developed for transmission electron microscopy

    PubMed Central

    Kimoto, Koji

    2014-01-01

    A few practical aspects of monochromators recently developed for transmission electron microscopy are briefly reviewed. The basic structures and properties of four monochromators, a single Wien filter monochromator, a double Wien filter monochromator, an omega-shaped electrostatic monochromator and an alpha-shaped magnetic monochromator, are outlined. The advantages and side effects of these monochromators in spectroscopy and imaging are pointed out. A few properties of the monochromators in imaging, such as spatial or angular chromaticity, are also discussed. PMID:25125333

  5. Transmission of High-Power Electron Beams Through Small Apertures

    SciTech Connect

    Tschalaer, Christoph; Alarcon, Ricardo O.; Balascuta, S.; Benson, Stephen V.; Bertozzi, William; Boyce, James R.; Cowan, Ray Franklin; Douglas, David R.; Evtushenko, Pavel; Fisher, Peter H.; Ihloff, Ernest E.; Kalantarians, Narbe; Kelleher, Aidan Michael; Legg, Robert A.; Milner, Richard; Neil, George R.; Ou, Longwu; Schmookler, Barak Abraham; Tennant, Christopher D.; Williams, Gwyn P.; Zhang, Shukui

    2013-11-01

    Tests were performed to pass a 100 MeV, 430 kWatt c.w. electron beam from the energy-recovery linac at the Jefferson Laboratory's FEL facility through a set of small apertures in a 127 mm long aluminum block. Beam transmission losses of 3 p.p.m. through a 2 mm diameter aperture were maintained during a 7 hour continuous run.

  6. High Brightness and high polarization electron source using transmission photocathode

    SciTech Connect

    Yamamoto, Naoto; Jin Xiuguang; Ujihara, Toru; Takeda, Yoshikazu; Mano, Atsushi; Nakagawa, Yasuhide; Nakanishi, Tsutomu; Okumi, Shoji; Yamamoto, Masahiro; Konomi, Taro; Ohshima, Takashi; Saka, Takashi; Kato, Toshihiro; Horinaka, Hiromichi; Yasue, Tsuneo; Koshikawa, Takanori

    2009-08-04

    A transmission photocathode was fabricated based on GaAs-GaAsP strained superlattice layers on a GaP substrate and a 20 kV-gun was built to generate the polarized electron beams with the diameter of a few micro-meter. As the results, the reduced brightness of 1.3x10{sup 7} A/cm{sup 2}/sr and the polarization of 90% were achieved.

  7. Studying localized corrosion using liquid cell transmission electron microscopy

    SciTech Connect

    Chee, See Wee; Pratt, Sarah H.; Hattar, Khalid; Duquette, David; Ross, Frances M.; Hull, Robert

    2014-11-07

    Using liquid cell transmission electron microscopy (LCTEM), localized corrosion of Cu and Al thin films immersed in aqueous NaCl solutions was studied. We demonstrate that potentiostatic control can be used to initiate pitting and that local compositional changes, due to focused ion beam implantation of Au+ ions, can modify the corrosion susceptibility of Al films. Likewise, a discussion on strategies to control the onset of pitting is also presented.

  8. Studying localized corrosion using liquid cell transmission electron microscopy

    DOE PAGES

    Chee, See Wee; Pratt, Sarah H.; Hattar, Khalid; ...

    2014-11-07

    Using liquid cell transmission electron microscopy (LCTEM), localized corrosion of Cu and Al thin films immersed in aqueous NaCl solutions was studied. We demonstrate that potentiostatic control can be used to initiate pitting and that local compositional changes, due to focused ion beam implantation of Au+ ions, can modify the corrosion susceptibility of Al films. Likewise, a discussion on strategies to control the onset of pitting is also presented.

  9. Sub-10 nm device fabrication in a transmission electron microscope.

    PubMed

    Fischbein, Michael D; Drndić, Marija

    2007-05-01

    We show that a high-resolution transmission electron microscope can be used to fabricate metal nanostructures and devices on insulating membranes by nanosculpting metal films. Fabricated devices include nanogaps, nanodiscs, nanorings, nanochannels, and nanowires with tailored curvatures and multi-terminal nanogap devices with nanoislands or nanoholes between the terminals. The high resolution, geometrical flexibility, and yield make this fabrication method attractive for many applications including nanoelectronics and nanofluidics.

  10. Reciprocity relations in transmission electron microscopy: A rigorous derivation.

    PubMed

    Krause, Florian F; Rosenauer, Andreas

    2017-01-01

    A concise derivation of the principle of reciprocity applied to realistic transmission electron microscopy setups is presented making use of the multislice formalism. The equivalence of images acquired in conventional and scanning mode is thereby rigorously shown. The conditions for the applicability of the found reciprocity relations is discussed. Furthermore the positions of apertures in relation to the corresponding lenses are considered, a subject which scarcely has been addressed in previous publications.

  11. Analysis of Electron Beam Damage of Crystalline Pharmaceutical Materials by Transmission Electron Microscopy

    NASA Astrophysics Data System (ADS)

    S'ari, M.; Cattle, J.; Hondow, N.; Blade, H.; Cosgrove, S.; Brydson, R. M.; Brown, A. P.

    2015-10-01

    We have studied the impact of transmission electron microscopy (TEM) and low dose electron diffraction on ten different crystalline pharmaceutical compounds, covering a diverse chemical space and with differing physical properties. The aim was to establish if particular chemical moieties were more susceptible to damage within the electron beam. We have measured crystalline diffraction patterns for each and indexed nine out of ten of them. Characteristic electron dosages are reported for each material, with no apparent correlation between chemical structure and stability within the electron beam. Such low dose electron diffraction protocols are suitable for the study of pharmaceutical compounds.

  12. Applications of 1 MV field-emission transmission electron microscope.

    PubMed

    Tonomura, Akira

    2003-01-01

    A newly developed 1 MV field-emission transmission electron microscope has recently been applied to the field of superconductivity by utilizing its bright and monochromatic field-emission electron beam. This microscope allows individual magnetic vortices inside high-Tc superconductors to be observed, thus, opening the way to investigate the unusual behaviour of vortices, which reflects the anisotropic layered structure of these superconducting materials. One example is the observation of the arrangements of chain vortex lines that are formed when a magnetic field is applied obliquely to the layer plane of the materials.

  13. Transmission electron microscopy of a model crystalline organic, theophylline

    NASA Astrophysics Data System (ADS)

    Cattle, J.; S'ari, M.; Hondow, N.; Abellán, P.; Brown, A. P.; Brydson, R. M. D.

    2015-10-01

    We report on the use of transmission electron microscopy (TEM) to analyse the diffraction patterns of the model crystalline organic theophylline to investigate beam damage in relation to changing accelerating voltage, sample temperature and TEM grid support films. We find that samples deposited on graphene film grids have the longest lifetimes when also held at -190 °C and imaged at 200 kV accelerating voltage. Finally, atomic lattice images are obtained in bright field STEM by working close to the estimated critical electron dose for theophylline.

  14. Free-standing graphene by scanning transmission electron microscopy.

    PubMed

    Song, F Q; Li, Z Y; Wang, Z W; He, L; Han, M; Wang, G H

    2010-11-01

    Free-standing graphene sheets have been imaged by scanning transmission electron microscopy (STEM). We show that the discrete numbers of graphene layers enable an accurate calibration of STEM intensity to be performed over an extended thickness and with single atomic layer sensitivity. We have applied this calibration to carbon nanoparticles with complex structures. This leads to the direct and accurate measurement of the electron mean free path. Here, we demonstrate potentials using graphene sheets as a novel mass standard in STEM-based mass spectrometry.

  15. Transmission Electron Microscopy Study of InN Nanorods

    SciTech Connect

    Liliental-Weber, Z.; Li, X.; Kryliouk, Olga; Park, H.J.; Mangum,J.; Anderson, T.

    2006-07-13

    InN nanorods were grown on a, c-, and r-plane of sapphire and also on Si (111) and GaN (0001) by non-catalytic, template-free hydride metal-organic vapor phase epitaxy and studied by transmission electron microscopy, electron energy loss (EELS) and photoluminescence (PL) at room temperature. These nanocrystals have different shapes and different faceting depending on the substrate used and their crystallographic orientation. EELS measurements have confirmed the high purity of these crystals. The observed PL peak was in the range of 0.9-0.95 eV. The strongest PL intensity was observed for the nanocrystals with the larger diameters.

  16. Scanning transmission electron microscopy: Albert Crewe's vision and beyond.

    PubMed

    Krivanek, Ondrej L; Chisholm, Matthew F; Murfitt, Matthew F; Dellby, Niklas

    2012-12-01

    Some four decades were needed to catch up with the vision that Albert Crewe and his group had for the scanning transmission electron microscope (STEM) in the nineteen sixties and seventies: attaining 0.5Å resolution, and identifying single atoms spectroscopically. With these goals now attained, STEM developments are turning toward new directions, such as rapid atomic resolution imaging and exploring atomic bonding and electronic properties of samples at atomic resolution. The accomplishments and the future challenges are reviewed and illustrated with practical examples.

  17. Pulsed Power for a Dynamic Transmission Electron Microscope

    SciTech Connect

    dehope, w j; browning, n; campbell, g; cook, e; king, w; lagrange, t; reed, b; stuart, b; Shuttlesworth, R; Pyke, B

    2009-06-25

    Lawrence Livermore National Laboratory (LLNL) has converted a commercial 200kV transmission electron microscope (TEM) into an ultrafast, nanoscale diagnostic tool for material science studies. The resulting Dynamic Transmission Electron Microscope (DTEM) has provided a unique tool for the study of material phase transitions, reaction front analyses, and other studies in the fields of chemistry, materials science, and biology. The TEM's thermionic electron emission source was replaced with a fast photocathode and a laser beam path was provided for ultraviolet surface illumination. The resulting photoelectron beam gives downstream images of 2 and 20 ns exposure times at 100 and 10 nm spatial resolution. A separate laser, used as a pump pulse, is used to heat, ignite, or shock samples while the photocathode electron pulses, carefully time-synchronized with the pump, function as probe in fast transient studies. The device functions in both imaging and diffraction modes. A laser upgrade is underway to make arbitrary cathode pulse trains of variable pulse width of 10-1000 ns. Along with a fast e-beam deflection scheme, a 'movie mode' capability will be added to this unique diagnostic tool. This talk will review conventional electron microscopy and its limitations, discuss the development and capabilities of DTEM, in particularly addressing the prime and pulsed power considerations in the design and fabrication of the DTEM, and conclude with the presentation of a deflector and solid-state pulser design for Movie-Mode DTEM.

  18. Precision electron flow measurements in a disk transmission line.

    SciTech Connect

    Clark, Waylon T.; Pelock, Michael D.; Martin, Jeremy Paul; Jackson, Daniel Peter Jr.; Savage, Mark Edward; Stoltzfus, Brian Scott; Mendel, Clifford Will, Jr.; Pointon, Timothy David

    2008-01-01

    An analytic model for electron flow in a system driving a fixed inductive load is described and evaluated with particle in cell simulations. The simple model allows determining the impedance profile for a magnetically insulated transmission line given the minimum gap desired, and the lumped inductance inside the transition to the minimum gap. The model allows specifying the relative electron flow along the power flow direction, including cases where the fractional electron flow decreases in the power flow direction. The electrons are able to return to the cathode because they gain energy from the temporally rising magnetic field. The simulations were done with small cell size to reduce numerical heating. An experiment to compare electron flow to the simulations was done. The measured electron flow is {approx}33% of the value from the simulations. The discrepancy is assumed to be due to a reversed electric field at the cathode because of the inductive load and falling electron drift velocity in the power flow direction. The simulations constrain the cathode electric field to zero, which gives the highest possible electron flow.

  19. Photocathode Optimization for a Dynamic Transmission Electron Microscope: Final Report

    SciTech Connect

    Ellis, P; Flom, Z; Heinselman, K; Nguyen, T; Tung, S; Haskell, R; Reed, B W; LaGrange, T

    2011-08-04

    The Dynamic Transmission Electron Microscope (DTEM) team at Harvey Mudd College has been sponsored by LLNL to design and build a test setup for optimizing the performance of the DTEM's electron source. Unlike a traditional TEM, the DTEM achieves much faster exposure times by using photoemission from a photocathode to produce electrons for imaging. The DTEM team's work is motivated by the need to improve the coherence and current density of the electron cloud produced by the electron gun in order to increase the image resolution and contrast achievable by DTEM. The photoemission test setup is nearly complete and the team will soon complete baseline tests of electron gun performance. The photoemission laser and high voltage power supply have been repaired; the optics path for relaying the laser to the photocathode has been finalized, assembled, and aligned; the internal setup of the vacuum chamber has been finalized and mostly implemented; and system control, synchronization, and data acquisition has been implemented in LabVIEW. Immediate future work includes determining a consistent alignment procedure to place the laser waist on the photocathode, and taking baseline performance measurements of the tantalum photocathode. Future research will examine the performance of the electron gun as a function of the photoemission laser profile, the photocathode material, and the geometry and voltages of the accelerating and focusing components in the electron gun. This report presents the team's progress and outlines the work that remains.

  20. Transmission electron microscopic examination of phosphoric acid fuel cell components

    NASA Technical Reports Server (NTRS)

    Pebler, A.

    1986-01-01

    Transmission electron microscopy (TEM) was used to physically characterize tested and untested phosphoric acid fuel cell (PAFC) components. Those examined included carbon-supported platinum catalysts, carbon backing paper, and Teflon-bonded catalyst layers at various stages of fabrication and after testing in pressurized PAFC's. Applicability of electron diffraction and electron energy loss spectroscopy for identifying the various phases was explored. The discussion focuses on the morphology and size distribution of platinum, the morphology and structural aspects of Teflon in catalyst layers, and the structural evidence of carbon corrosion. Reference is made to other physical characterization techniques where appropriate. A qualitative model of the catalyst layer that emerged from the TEM studies is presented.

  1. Transmission electron microscope characterisation of molar-incisor-hypomineralisation.

    PubMed

    Xie, Zonghan; Kilpatrick, Nicky M; Swain, Michael V; Munroe, Paul R; Hoffman, Mark

    2008-10-01

    Molar-incisor-hypomineralisation (MIH), one of the major developmental defects in dental enamel, is presenting challenge to clinicians due, in part, to the limited understanding of microstructural changes in affected teeth. Difficulties in the preparation of site-specific transmission electron microscope (TEM) specimens are partly responsible for this deficit. In this study, a dual-beam field emission scanning electron microscope (FESEM)/focused ion beam (FIB) milling instrument was used to prepare electron transparent specimens of sound and hypomineralised enamel. Microstructural analysis revealed that the hypomineralised areas in enamel were associated with marked changes in microstructure; loosely packed apatite crystals within prisms and wider sheath regions were identified. Microstructural changes appear to occur during enamel maturation and may be responsible for the dramatic reduction in mechanical properties of the affected regions. An enhanced knowledge of the degradation of structural integrity in hypomineralised enamel could shed light on more appropriate management strategies for these developmental defects.

  2. Time Resolved Phase Transitions via Dynamic Transmission Electron Microscopy

    SciTech Connect

    Reed, B W; Armstrong, M R; Blobaum, K J; Browning, N D; Burnham, A K; Campbell, G H; Gee, R; Kim, J S; King, W E; Maiti, A; Piggott, W T; Torralva, B R

    2007-02-22

    The Dynamic Transmission Electron Microscope (DTEM) project is developing an in situ electron microscope with nanometer- and nanosecond-scale resolution for the study of rapid laser-driven processes in materials. We report on the results obtained in a year-long LDRD-supported effort to develop DTEM techniques and results for phase transitions in molecular crystals, reactive multilayer foils, and melting and resolidification of bismuth. We report the first in situ TEM observation of the HMX {beta}-{delta} phase transformation in sub-{micro}m crystals, computational results suggesting the importance of voids and free surfaces in the HMX transformation kinetics, and the first electron diffraction patterns of intermediate states in fast multilayer foil reactions. This project developed techniques which are applicable to many materials systems and will continue to be employed within the larger DTEM effort.

  3. Effects of instrument imperfections on quantitative scanning transmission electron microscopy.

    PubMed

    Krause, Florian F; Schowalter, Marco; Grieb, Tim; Müller-Caspary, Knut; Mehrtens, Thorsten; Rosenauer, Andreas

    2016-02-01

    Several instrumental imperfections of transmission electron microscopes are characterized and their effects on the results of quantitative scanning electron microscopy (STEM) are investigated and quantified using simulations. Methods to either avoid influences of these imperfections during acquisition or to include them in reference calculations are proposed. Particularly, distortions inflicted on the diffraction pattern by an image-aberration corrector can cause severe errors of more than 20% if not accounted for. A procedure for their measurement is proposed here. Furthermore, afterglow phenomena and nonlinear behavior of the detector itself can lead to incorrect normalization of measured intensities. Single electrons accidentally impinging on the detector are another source of error but can also be exploited for threshold-less calibration of STEM images to absolute dose, incident beam current determination and measurement of the detector sensitivity.

  4. Three-dimensional scanning transmission electron microscopy of biological specimens

    SciTech Connect

    De Jonge, Niels; Sougrat, Rachid; Northan, Brian; Pennycook, Stephen J

    2010-01-01

    A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2 - 3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original data set. The precision of the height determination was 0.2 nm. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy (TEM). However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved data set.

  5. Structural Fingerprinting of Nanocrystals in the Transmission Electron Microscope

    NASA Astrophysics Data System (ADS)

    Rouvimov, Sergei; Plachinda, Pavel; Moeck, Peter

    2010-03-01

    Three novel strategies for the structurally identification of nanocrystals in a transmission electron microscope are presented. Either a single high-resolution transmission electron microscopy image [1] or a single precession electron diffractogram (PED) [2] may be employed. PEDs from fine-grained crystal powders may also be utilized. Automation of the former two strategies is in progress and shall lead to statistically significant results on ensembles of nanocrystals. Open-access databases such as the Crystallography Open Database which provides more than 81,500 crystal structure data sets [3] or its mainly inorganic and educational subsets [4] may be utilized. [1] http://www.scientificjournals.org/journals 2007/j/of/dissertation.htm [2] P. Moeck and S. Rouvimov, in: {Drugs and the Pharmaceutical Sciences}, Vol. 191, 2009, 270-313 [3] http://cod.ibt.lt, http://www.crystallography.net, http://cod.ensicaen.fr, http://nanocrystallography.org, http://nanocrystallography.net, http://journals.iucr.org/j/issues/2009/04/00/kk5039/kk5039.pdf [4] http://nanocrystallography.research.pdx.edu/CIF-searchable

  6. Nanocrystal size distribution analysis from transmission electron microscopy images

    NASA Astrophysics Data System (ADS)

    van Sebille, Martijn; van der Maaten, Laurens J. P.; Xie, Ling; Jarolimek, Karol; Santbergen, Rudi; van Swaaij, René A. C. M. M.; Leifer, Klaus; Zeman, Miro

    2015-12-01

    We propose a method, with minimal bias caused by user input, to quickly detect and measure the nanocrystal size distribution from transmission electron microscopy (TEM) images using a combination of Laplacian of Gaussian filters and non-maximum suppression. We demonstrate the proposed method on bright-field TEM images of an a-SiC:H sample containing embedded silicon nanocrystals with varying magnifications and we compare the accuracy and speed with size distributions obtained by manual measurements, a thresholding method and PEBBLES. Finally, we analytically consider the error induced by slicing nanocrystals during TEM sample preparation on the measured nanocrystal size distribution and formulate an equation to correct this effect.We propose a method, with minimal bias caused by user input, to quickly detect and measure the nanocrystal size distribution from transmission electron microscopy (TEM) images using a combination of Laplacian of Gaussian filters and non-maximum suppression. We demonstrate the proposed method on bright-field TEM images of an a-SiC:H sample containing embedded silicon nanocrystals with varying magnifications and we compare the accuracy and speed with size distributions obtained by manual measurements, a thresholding method and PEBBLES. Finally, we analytically consider the error induced by slicing nanocrystals during TEM sample preparation on the measured nanocrystal size distribution and formulate an equation to correct this effect. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06292f

  7. Three-dimensional scanning transmission electron microscopy of biological specimens.

    PubMed

    de Jonge, Niels; Sougrat, Rachid; Northan, Brian M; Pennycook, Stephen J

    2010-02-01

    A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2-3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original dataset. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy. However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved dataset.

  8. 45 CFR Appendix C to Part 1355 - Electronic Data Transmission Format

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 4 2013-10-01 2013-10-01 false Electronic Data Transmission Format C Appendix C.... 1355, App. C Appendix C to Part 1355—Electronic Data Transmission Format All AFCARS data to be sent... be four semi-annual electronic data transmissions from the title IV-E agency to the...

  9. Improving transmission rates of electronic discharge summaries to GPs.

    PubMed

    Barr, Rory; Chin, Kuen Yeow; Yeong, Keefai

    2013-01-01

    Discharge summaries are a vital tool to communicate information from Hospital to Primary Care teams; updating GPs about what happened during an admission, and handing over care detailing any follow up care required. Historically, Discharge Summaries have been posted to hospitals, increasing costs for hospitals, creating administrative work for GP practices receiving the letters, and resulting in some letters being lost or delayed in reaching the GP, with implications for patient safety if follow up requests are not received and acted upon. In an effort to improve patient care, the Clinical Commissioning Group in Surrey drew up a contract with Ashford and St Peter's Foundation Trust, aiming to increase the percentage of discharge summaries sent electronically from the rate of 9% sent within 24 hours, to over 75%. This contract set targets of 50% in May, 65% in June, and 80% in July. Financial penalties would be imposed if targets were not achieved, starting in June 2013. The Trust set up a working group comprising of doctors, IT personnel and ward PAs to devise a multi-pronged solution to achieve this target. The electronic discharge summary system was reviewed and improvements were designed and developed to make the process of signing off letters easier, and transmission of signed off letters became automated rather than requiring manual transmission by ward PAs. Presentations and leaflets to explain the importance of prompt completion and transmission of discharge summaries were given to Doctors to improve compliance using the revised IT system. Figures on transmission rates were automatically emailed to key stakeholders every day (Ward PAs, Divisional Leads) showing performance on each ward. This helped identify areas requiring more intervention. Areas (e.g. Day Surgery) that had not used electronic discharge summaries were engaged with, and persuaded to take part. As a result, transmission rates of Discharge Summaries within 24 hours of patient discharge

  10. Segmentation of virus particle candidates in transmission electron microscopy images.

    PubMed

    Kylberg, G; Uppström, M; Hedlund, K-O; Borgefors, G; Sintorn, I-M

    2012-02-01

    In this paper, we present an automatic segmentation method that detects virus particles of various shapes in transmission electron microscopy images. The method is based on a statistical analysis of local neighbourhoods of all the pixels in the image followed by an object width discrimination and finally, for elongated objects, a border refinement step. It requires only one input parameter, the approximate width of the virus particles searched for. The proposed method is evaluated on a large number of viruses. It successfully segments viruses regardless of shape, from polyhedral to highly pleomorphic.

  11. Transmission Electron Microscopy Of Lipid Vesicles For Drug Delivery

    NASA Astrophysics Data System (ADS)

    Bello, Valentina; Mattei, Giovanni; Mazzoldi, Paolo; Vivenza, Nicoletta; Gasco, Paolo; Idee, Jean Marc; Robic, Caroline; Borsella, Elisabetta

    2010-10-01

    Iron oxides nanocrystals are largely used for biomedical applications due to their high magnetization. Furthermore for in vivo applications these nanoparticles must be covered with a non-toxic material. Inside the numerous nano-systems for drug delivery, lipid structures, such as Solid Lipid Nanoparticles (SLNs), have been largely developed for various administration routes. In this work SLNs and iron-oxide nanocrystals covered with a lipid shell are characterized by Transmission Electron Microscopy. This technique has revealed to be essential to investigate the ultrafine compositional and morphological properties of these systems.

  12. Extreme ultraviolet spectrometer based on a transmission electron microscopy grid

    DOE PAGES

    Sistrunk, Emily; Gühr, Markus

    2014-12-12

    Here, we performed extreme ultraviolet spectroscopy using an 80 lines/mm transmission electron microscope mesh as the dispersive element. We also present the usefulness of this instrument for dispersing a high harmonic spectrum from the 13th to the 29th harmonic of a Ti:sapph laser, corresponding to a wavelength range from 60 to 27 nm. The resolution of the instrument is limited by the image size of the high harmonic generation region on the detector. Finally, the resolution in first order diffraction is under 2 nm over the entire spectral range with a resolving power around 30.

  13. Transmission electron microscopy of electrospun GaN nanofibers

    NASA Astrophysics Data System (ADS)

    Robles-García, Joshua L.; Meléndez, Anamaris; Yates, Douglas; Santiago-Avilés, Jorge J.; Ramos, Idalia; Campo, Eva M.

    2011-06-01

    We have reported earlier progress in producing polycrystalline wurtzite-polymorph and photo-conductive GaN nanofibers by electrospinning. This paper shows grain stacking during heat treatment and suggests the need to understand nucleation and grain growth following electrospinning. Transmission Electron Microscopy (TEM) analysis of GaN shows brittle fibers, grain stacking, and unfinished grain nucleation. X-Ray Diffraction analysis confirmed dominant hexagonal 101-wurtzite preferential overall orientation and the incipient grains are of high crystalline quality as seen by high resolution TEM.

  14. Simultaneous orientation and thickness mapping in transmission electron microscopy

    SciTech Connect

    Tyutyunnikov, Dmitry; Özdöl, V. Burak; Koch, Christoph T.

    2014-12-04

    In this paper we introduce an approach for simultaneous thickness and orientation mapping of crystalline samples by means of transmission electron microscopy. We show that local thickness and orientation values can be extracted from experimental dark-field (DF) image data acquired at different specimen tilts. The method has been implemented to automatically acquire the necessary data and then map thickness and crystal orientation for a given region of interest. We have applied this technique to a specimen prepared from a commercial semiconductor device, containing multiple 22 nm technology transistor structures. The performance and limitations of our method are discussed and compared to those of other techniques available.

  15. Transmission electron microscopy study of flea lymph cell thin sections

    NASA Astrophysics Data System (ADS)

    Volkov, Uryi P.; Konnov, Nikolai P.; Novikova, Olga V.

    2002-07-01

    Transmission electron microscopy investigation of thin sections remains the major method of cells inner structure study with high resolution. However, the present-day technique of cells preparation make it impossible to study a number of biological samples, such as very small quantity of lymph cells of little insects. A new technique of cells preparation has been developed in our lab, which allows to obtain a thin sections of ultra small quantity of cells. Structure of lymph cells of flea was investigated by the technique.

  16. Modeling atomic-resolution scanning transmission electron microscopy images.

    PubMed

    Findlay, Scott D; Oxley, Mark P; Allen, Leslie J

    2008-02-01

    A real-space description of inelastic scattering in scanning transmission electron microscopy is derived with particular attention given to the implementation of the projected potential approximation. A hierarchy of approximations to expressions for inelastic images is presented. Emphasis is placed on the conditions that must hold in each case. The expressions that justify the most direct, visual interpretation of experimental data are also the most approximate. Therefore, caution must be exercised in selecting experimental parameters that validate the approximations needed for the analysis technique used. To make the most direct, visual interpretation of electron-energy-loss spectroscopic images from core-shell excitations requires detector improvements commensurate with those that aberration correction provides for the probe-forming lens. Such conditions can be relaxed when detailed simulations are performed as part of the analysis of experimental data.

  17. In situ transmission electron microscopy for magnetic nanostructures

    NASA Astrophysics Data System (ADS)

    Ngo, Duc-The; Theil Kuhn, Luise

    2016-12-01

    Nanomagnetism is a subject of great interest because of both application and fundamental aspects in which understanding of the physical and electromagnetic structure of magnetic nanostructures is essential to explore the magnetic properties. Transmission electron microscopy (TEM) is a powerful tool that allows understanding of both physical structure and micromagnetic structure of the thin samples at nanoscale. Among TEM techniques, in situ TEM is the state-of-the-art approach for imaging such structures in dynamic experiments, reconstructing a real-time nanoscale picture of the properties-structure correlation. This paper aims at reviewing and discussing in situ TEM magnetic imaging studies, including Lorentz microscopy and electron holography in TEM, applied to the research of magnetic nanostructures.

  18. Combined Scanning Transmission Electron Microscopy Tilt- and Focal Series

    SciTech Connect

    Dahmen, Tim; Baudoin, Jean-Pierre G; Lupini, Andrew R; Kubel, Christian; Slusallek, Phillip; De Jonge, Niels

    2014-01-01

    In this study, a combined tilt- and focal series is proposed as a new recording scheme for high-angle annular dark-field scanning transmission electron microscopy (STEM) tomography. Three-dimensional (3D) data were acquired by mechanically tilting the specimen, and recording a through-focal series at each tilt direction. The sample was a whole-mount macrophage cell with embedded gold nanoparticles. The tilt focal algebraic reconstruction technique (TF-ART) is introduced as a new algorithm to reconstruct tomograms from such combined tilt- and focal series. The feasibility of TF-ART was demonstrated by 3D reconstruction of the experimental 3D data. The results were compared with a conventional STEM tilt series of a similar sample. The combined tilt- and focal series led to smaller missing wedge artifacts, and a higher axial resolution than obtained for the STEM tilt series, thus improving on one of the main issues of tilt series-based electron tomography.

  19. Coherent Chromatic Effect in the Transmission Electron Microscope

    NASA Astrophysics Data System (ADS)

    Erni, Rolf

    2016-03-01

    Under the assumption of local atomic scattering, elastic electron scattering at finite scattering angles implies a small but finite energy loss. This energy loss, which under conventional imaging conditions in high-resolution transmission electron microscopy is of the order of 0.1 meV and thus negligible, increases by more than 2 orders of magnitude if light elements are investigated at sub-Ångström resolution. For a microscope of finite chromatic aberration, the energy loss leads to an element-specific chromatic effect which increases with the instrument resolution and with decreasing mass of the scattering atom. Despite that this effect is small, it can degrade the achievable image contrast. However, the effect can be considered in the optimization of the phase-contrast imaging conditions and even be beneficial to enhance the relative image contrast of light atoms in the presence of heavy atoms.

  20. Coherent Chromatic Effect in the Transmission Electron Microscope.

    PubMed

    Erni, Rolf

    2016-03-18

    Under the assumption of local atomic scattering, elastic electron scattering at finite scattering angles implies a small but finite energy loss. This energy loss, which under conventional imaging conditions in high-resolution transmission electron microscopy is of the order of 0.1 meV and thus negligible, increases by more than 2 orders of magnitude if light elements are investigated at sub-Ångström resolution. For a microscope of finite chromatic aberration, the energy loss leads to an element-specific chromatic effect which increases with the instrument resolution and with decreasing mass of the scattering atom. Despite that this effect is small, it can degrade the achievable image contrast. However, the effect can be considered in the optimization of the phase-contrast imaging conditions and even be beneficial to enhance the relative image contrast of light atoms in the presence of heavy atoms.

  1. 36 CFR 1236.22 - What are the additional requirements for managing electronic mail records?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... must be preserved as part of the electronic mail record or linked to the electronic mail record with... electronic mail records with the related transmission and receipt data specified by the agency's...

  2. In situ nanoindentation in a transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Minor, Andrew Murphy

    This dissertation presents the development of the novel mechanical testing technique of in situ nanoindentation in a transmission electron microscope (TEM). This technique makes it possible to simultaneously observe and quantify the mechanical behavior of nano-scale volumes of solids. Chapter 2 details the unique specimen preparation techniques employed to meet the geometrical constraints of the in situ experiments. These techniques include bulk silicon micromachining and the use of a focused ion beam. In section 2.4 a method of voltage-controlled mechanical testing is derived theoretically and proven experimentally. This method enables the quantification of the mechanical behavior during in situ nanoindentation experiments. Three classes of material systems were studied with this new technique: (1) bulk single crystal, (2) a soft thin film on a harder substrate and (3) a hard thin film on a softer substrate. Section 3.2 provides the first direct evidence of dislocation nucleation in single crystal silicon at room temperature. In contrast to the observation of phase transformations during conventional indentation experiments, the unique geometry employed for the in situ experiments resulted in dislocation plasticity. In section 3.3 results from in situ nanoindentation of Al films on Si substrates are presented. These results include the correlation of the microstructural deformation behavior with load vs. displacement data. It is shown that a sharp change in the force-displacement response at the elastic-to-plastic transition signifies the nucleation of dislocations. Additionally, the softening of sub-micron grains with size is observed. Section 3.4 discussed the influence of the substrate on the indentation response of two thin film/substrate systems where the films were harder than the substrate. Amorphous diamond on Si and epitaxial TiN on MgO (001) systems were studied. It was found that the deformation in the harder films was controlled by the deformation in

  3. In situ transmission electron microscopy of individual carbon nanotetrahedron/nanoribbon structures in Joule heating

    SciTech Connect

    Masuda, Yusuke; Yoshida, Hideto; Takeda, Seiji; Kohno, Hideo

    2014-08-25

    Collapse of a carbon nanotube results in the formation of a nanoribbon, and a switching of the collapse direction yields a nanotetrahedron in the middle of a nanoribbon. Here, we report in-situ transmission electron microscopy observations of the behavior of carbon nanotetrahedron/nanoribbon structures during Joule heating to reveal their thermal stability. In addition, we propose that the observed process is related to the formation process of the structure.

  4. Contamination mitigation strategies for scanning transmission electron microscopy.

    PubMed

    Mitchell, D R G

    2015-06-01

    Modern scanning transmission electron microscopy (STEM) enables imaging and microanalysis at very high magnification. In the case of aberration-corrected STEM, atomic resolution is readily achieved. However, the electron fluxes used may be up to three orders of magnitude greater than those typically employed in conventional STEM. Since specimen contamination often increases with electron flux, specimen cleanliness is a critical factor in obtaining meaningful data when carrying out high magnification STEM. A range of different specimen cleaning methods have been applied to a variety of specimen types. The contamination rate has been measured quantitatively to assess the effectiveness of cleaning. The methods studied include: baking, cooling, plasma cleaning, beam showering and UV/ozone exposure. Of the methods tested, beam showering is rapid, experimentally convenient and very effective on a wide range of specimens. Oxidative plasma cleaning is also very effective and can be applied to specimens on carbon support films, albeit with some care. For electron beam-sensitive materials, cooling may be the method of choice. In most cases, preliminary removal of the bulk of the contamination by methods such as baking or plasma cleaning, followed by beam showering, where necessary, can result in a contamination-free specimen suitable for extended atomic scale imaging and analysis.

  5. 14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Transmission of electronic tariffs to... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.500 Transmission of electronic tariffs to subscribers. (a) Each filer that files an electronic tariff under...

  6. 14 CFR 221.500 - Transmission of electronic tariffs to subscribers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Transmission of electronic tariffs to... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.500 Transmission of electronic tariffs to subscribers. (a) Each filer that files an electronic tariff under...

  7. 76 FR 71044 - International Conference on Harmonisation; E2B(R3) Electronic Transmission of Individual Case...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-16

    ...) Electronic Transmission of Individual Case Safety Reports; Draft Guidance on Implementation; Data Elements...) Electronic Transmission of Individual Case Safety Reports (ICSRs): Implementation Guide--Data Elements...

  8. Transmission electron microscopy characterisation of 0-D nanomaterials

    NASA Astrophysics Data System (ADS)

    Turner, Stuart Matthew

    When materials are scaled down to the nanometre level, a change in physical behaviour is frequently observed. In so-called 0-D nanomaterials (nanoparticles), these unique nanoscale properties are most abundant and are usually linked to either a change in (electronic) structure of the material or to the dominating influence of the particle surface at the nanometre scale. In this doctoral work the nanoscale properties of several nanoparticle systems have been studied using advanced transmission electron microscopy (TEM). Every material that was studied required for its solution a unique approach and a host of transmission electron microscopy techniques. The title of this doctoral work can be freely translated as "retrieving quantitatively the maximal and most accurate chemical, structural and morphological information from nanoparticles by advanced transmission electron microscopy, to uncover and explain their unique properties". Chapter 1 gives a brief general introduction to the world of nanomaterials and nanotechnology in general and more specifically to 0-D nanomaterials (nanoparticles). The unique properties and potential applications of these materials are described. The production of 0-D nanomaterials is not covered in this chapter, as this is an extremely broad field to cover in only a few pages. Instead, the production method for each of the materials is left to the detailed chapters that follow. In Chapter 2 the main transmission electron microscopy techniques used to characterise the materials in the further chapters are described together with the microscopes used to perform these techniques and their parameters of operation. Again, the sample-specific setups are listed in the detailed chapters that follow. Chapter 3 covers all work carried out on luminescent detonation nanodiamond powder for drug delivery and bio-medical imaging applications. Specific attention is paid to the morphology, surface chemistry and nitrogen incorporation of detonation

  9. Concurrent in situ ion irradiation transmission electron microscope

    SciTech Connect

    Hattar, K.; Bufford, D. C.; Buller, D. L.

    2014-08-29

    An in situ ion irradiation transmission electron microscope has been developed and is operational at Sandia National Laboratories. This facility permits high spatial resolution, real time observation of electron transparent samples under ion irradiation, implantation, mechanical loading, corrosive environments, and combinations thereof. This includes the simultaneous implantation of low-energy gas ions (0.8–30 keV) during high-energy heavy ion irradiation (0.8–48 MeV). In addition, initial results in polycrystalline gold foils are provided to demonstrate the range of capabilities.

  10. Defects in paramagnetic Co-doped ZnO films studied by transmission electron microscopy

    SciTech Connect

    Kovacs, Andras; Ney, A.; Duchamp, Martial; Ney, V.; Boothroyd, Chris; Galindo, Pedro L.; Kaspar, Tiffany C.; Chambers, Scott A.; Dunin-Borkowski, Rafal

    2013-12-23

    We have studied planar defects in epitaxial Co:ZnO dilute magnetic semiconductor thin films deposited on c-plane sapphire (Al2O3) and the Co:ZnO/Al2O3 interface structure at atomic resolution using aberration-corrected transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS). Comparing Co:ZnO samples deposited by pulsed laser deposition and reactive magnetron sputtering, both exhibit extrinsic stacking faults, incoherent interface structures, and compositional variations within the first 3-4 Co:ZnO layers at the interface.. In addition, we have measured the local strain which reveals the lattice distortion around the stacking faults.

  11. Factors influencing quantitative liquid (scanning) transmission electron microscopy

    SciTech Connect

    Abellan Baeza, Patricia; Woehl, Taylor J.; Parent, Lucas R.; Browning, Nigel D.; Evans, James E.; Arslan, Ilke

    2014-04-15

    One of the experimental challenges in the study of nanomaterials in liquids in the (scanning) transmission electron microscope ((S)TEM) is gaining quantitative information. A successful experiment in the fluid stage will depend upon the ability to plan for sensitive factors such as the electron dose applied, imaging mode, acceleration voltage, beam-induced solution chemistry changes, and the specifics of solution reactivity. In this paper, we make use of a visual approach to show the extent of damage of different instrumental and experimental factors in liquid samples imaged in the (S)TEM. Previous results as well as new insights are presented to create an overview of beam-sample interactions identified for changing imaging and experimental conditions. This work establishes procedures to understand the effect of the electron beam on a solution, provides information to allow for a deliberate choice of the optimal experimental conditions to enable quantification, and identifies the experimental factors that require further analysis for achieving fully quantitative results in the liquid (S)TEM.

  12. Transmission electron microscopy in molecular structural biology: A historical survey.

    PubMed

    Harris, J Robin

    2015-09-01

    In this personal, historic account of macromolecular transmission electron microscopy (TEM), published data from the 1940s through to recent times is surveyed, within the context of the remarkable progress that has been achieved during this time period. The evolution of present day molecular structural biology is described in relation to the associated biological disciplines. The contribution of numerous electron microscope pioneers to the development of the subject is discussed. The principal techniques for TEM specimen preparation, thin sectioning, metal shadowing, negative staining and plunge-freezing (vitrification) of thin aqueous samples are described, with a selection of published images to emphasise the virtues of each method. The development of digital image analysis and 3D reconstruction is described in detail as applied to electron crystallography and reconstructions from helical structures, 2D membrane crystals as well as single particle 3D reconstruction of icosahedral viruses and macromolecules. The on-going development of new software, algorithms and approaches is highlighted before specific examples of the historical progress of the structural biology of proteins and viruses are presented.

  13. 46 CFR 531.8 - Amendment, correction, cancellation, and electronic transmission errors.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... transmission errors. 531.8 Section 531.8 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN..., cancellation, and electronic transmission errors. (a) Amendment. (1) NSAs may be amended by mutual agreement of.... (c) Electronic transmission errors. (1) An authorized person who experiences a purely...

  14. 46 CFR 530.10 - Amendment, correction, cancellation, and electronic transmission errors.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... transmission errors. 530.10 Section 530.10 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN..., cancellation, and electronic transmission errors. (a) Terms. When used in this section, the following terms... in appendix A to this part. (d) Electronic transmission errors. An authorized person who...

  15. 46 CFR 531.8 - Amendment, correction, cancellation, and electronic transmission errors.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... transmission errors. 531.8 Section 531.8 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN..., cancellation, and electronic transmission errors. (a) Amendment. (1) NSAs may be amended by mutual agreement of.... (c) Electronic transmission errors. (1) An authorized person who experiences a purely...

  16. 46 CFR 530.10 - Amendment, correction, cancellation, and electronic transmission errors.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... transmission errors. 530.10 Section 530.10 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN..., cancellation, and electronic transmission errors. (a) Terms. When used in this section, the following terms... in appendix A to this part. (d) Electronic transmission errors. An authorized person who...

  17. Interfacing Microfluidics with Negative Stain Transmission Electron Microscopy

    PubMed Central

    Mukhitov, Nikita; Spear, John M.; Stagg, Scott M.; Roper, Michael G.

    2016-01-01

    A microfluidic platform is presented for preparing negatively stained grids for use in transmission electron microscopy (EM). The microfluidic device is composed of glass etched with readily fabricated features that facilitate the extraction of the grid post-staining and maintains the integrity of the sample. Utilization of this device simultaneously reduced environmental contamination on the grids and improved the homogeneity of the heavy metal stain needed to enhance visualization of biological specimens as compared to conventionally prepared EM grids. This easy-to-use EM grid preparation device provides the basis for future developments of systems with more integrated features, which will allow for high throughput and dynamic structural biology studies. PMID:26642355

  18. A Transmission Electron Microscope Study of Experimentally Shocked Pregraphitic Carbon

    NASA Technical Reports Server (NTRS)

    Rietmeijer, Frans J. M.

    1995-01-01

    A transmission electron microscope study of experimental shock metamorphism in natural pre-graphitic carbon simulates the response of the most common natural carbons to increased shock pressure. The d-spacings of this carbon are insensitive to the shock pressure and have no apparent diagnostic value, but progressive comminution occurs in response to increased shock pressure up to 59.6 GPa. The function, P = 869.1 x (size(sub minimum )(exp -0.83), describes the relationship between the minimum root-mean-square subgrain size (nm) and shock pressure (GPa). While a subgrain texture of natural pregraphitic carbons carries little information when pre-shock textures are unknown, this texture may go unnoticed as a shock metamorphic feature.

  19. Implementing Transmission Electron Backscatter Diffraction for Atom Probe Tomography.

    PubMed

    Rice, Katherine P; Chen, Yimeng; Prosa, Ty J; Larson, David J

    2016-06-01

    There are advantages to performing transmission electron backscattering diffraction (tEBSD) in conjunction with focused ion beam-based specimen preparation for atom probe tomography (APT). Although tEBSD allows users to identify the position and character of grain boundaries, which can then be combined with APT to provide full chemical and orientation characterization of grain boundaries, tEBSD can also provide imaging information that improves the APT specimen preparation process by insuring proper placement of the targeted grain boundary within an APT specimen. In this report we discuss sample tilt angles, ion beam milling energies, and other considerations to optimize Kikuchi diffraction pattern quality for the APT specimen geometry. Coordinated specimen preparation and analysis of a grain boundary in a Ni-based Inconel 600 alloy is used to illustrate the approach revealing a 50° misorientation and trace element segregation to the grain boundary.

  20. Transmission electron microscope cells for use with liquid samples

    DOEpatents

    Khalid, Waqas; Alivisatos, Paul A.; Zettl, Alexander K.

    2016-08-09

    This disclosure provides systems, methods, and devices related to transmission electron microscopy cells for use with liquids. In one aspect a device includes a substrate, a first graphene layer, and a second graphene layer. The substrate has a first surface and a second surface. The first surface defines a first channel, a second channel, and an outlet channel. The first channel and the second channel are joined to the outlet channel. The outlet channel defines a viewport region forming a though hole in the substrate. The first graphene layer overlays the first surface of the substrate, including an interior area of the first channel, the second channel, and the outlet channel. The second graphene layer overlays the first surface of the substrate, including open regions defined by the first channel, the second channel, and the outlet channel.

  1. Temperature Calibration for In Situ Environmental Transmission Electron Microscopy Experiments

    PubMed Central

    Winterstein, JP; Lin, PA; Sharma, R

    2016-01-01

    In situ environmental transmission electron microscopy (ETEM) experiments require specimen heating holders to study material behavior in gaseous environments at elevated temperatures. In order to extract meaningful kinetic parameters, such as activation energies, it is essential to have a direct and accurate measurement of local sample temperature. This is particularly important if the sample temperature might fluctuate, for example when room temperature gases are introduced to the sample area. Using selected-area diffraction (SAD) in an ETEM, the lattice parameter of Ag nanoparticles was measured as a function of the temperature and pressure of hydrogen gas to provide a calibration of the local sample temperature. SAD permits measurement of temperature to an accuracy of ± 30 °C using Ag lattice expansion. Gas introduction can cause sample cooling of several hundred degrees celsius for gas pressures achievable in the ETEM. PMID:26441334

  2. Transmission electron microscope sample holder with optical features

    DOEpatents

    Milas, Mirko [Port Jefferson, NY; Zhu, Yimei [Stony Brook, NY; Rameau, Jonathan David [Coram, NY

    2012-03-27

    A sample holder for holding a sample to be observed for research purposes, particularly in a transmission electron microscope (TEM), generally includes an external alignment part for directing a light beam in a predetermined beam direction, a sample holder body in optical communication with the external alignment part and a sample support member disposed at a distal end of the sample holder body opposite the external alignment part for holding a sample to be analyzed. The sample holder body defines an internal conduit for the light beam and the sample support member includes a light beam positioner for directing the light beam between the sample holder body and the sample held by the sample support member.

  3. Simultaneous orientation and thickness mapping in transmission electron microscopy

    DOE PAGES

    Tyutyunnikov, Dmitry; Özdöl, V. Burak; Koch, Christoph T.

    2014-12-04

    In this paper we introduce an approach for simultaneous thickness and orientation mapping of crystalline samples by means of transmission electron microscopy. We show that local thickness and orientation values can be extracted from experimental dark-field (DF) image data acquired at different specimen tilts. The method has been implemented to automatically acquire the necessary data and then map thickness and crystal orientation for a given region of interest. We have applied this technique to a specimen prepared from a commercial semiconductor device, containing multiple 22 nm technology transistor structures. The performance and limitations of our method are discussed and comparedmore » to those of other techniques available.« less

  4. Annular dark field transmission electron microscopy for protein structure determination.

    PubMed

    Koeck, Philip J B

    2016-02-01

    Recently annular dark field (ADF) transmission electron microscopy (TEM) has been advocated as a means of recording images of biological specimens with better signal to noise ratio (SNR) than regular bright field images. I investigate whether and how such images could be used to determine the three-dimensional structure of proteins given that an ADF aperture with a suitable pass-band can be manufactured and used in practice. I develop an approximate theory of ADF-TEM image formation for weak amplitude and phase objects and test this theory using computer simulations. I also test whether these simulated images can be used to calculate a three-dimensional model of the protein using standard software and discuss problems and possible ways to overcome these.

  5. Dynamics of a nanodroplet under a transmission electron microscope

    SciTech Connect

    Leong, Fong Yew; Mirsaidov, Utkur M.; Matsudaira, Paul; Mahadevan, L.

    2014-01-15

    We investigate the cyclical stick-slip motion of water nanodroplets on a hydrophilic substrate viewed with and stimulated by a transmission electron microscope. Using a continuum long wave theory, we show how the electrostatic stress imposed by non-uniform charge distribution causes a pinned convex drop to deform into a toroidal shape, with the shape characterized by the competition between the electrostatic stress and the surface tension of the drop, as well as the charge density distribution which follows a Poisson equation. A horizontal gradient in the charge density creates a lateral driving force, which when sufficiently large, overcomes the pinning induced by surface heterogeneities in the substrate disjoining pressure, causing the drop to slide on the substrate via a cyclical stick-slip motion. Our model predicts step-like dynamics in drop displacement and surface area jumps, qualitatively consistent with experimental observations.

  6. Detector non-uniformity in scanning transmission electron microscopy.

    PubMed

    Findlay, S D; LeBeau, J M

    2013-01-01

    A non-uniform response across scanning transmission electron microscope annular detectors has been found experimentally, but is seldom incorporated into simulations. Through case study simulations, we establish the nature and scale of the discrepancies which may arise from failing to account for detector non-uniformity. If standard detectors are used at long camera lengths such that the detector is within or near to the bright field region, we find errors in contrast of the order of 10%, sufficiently small for qualitative work but non-trivial as experiments become more quantitative. In cases where the detector has been characterized in advance, we discuss the detector response normalization and how it may be incorporated in simulations.

  7. Scanning transmission electron microscopy strain measurement from millisecond frames of a direct electron charge coupled device

    SciTech Connect

    Mueller, Knut; Rosenauer, Andreas; Ryll, Henning; Ordavo, Ivan; Ihle, Sebastian; Soltau, Heike; Strueder, Lothar; Volz, Kerstin; Zweck, Josef

    2012-11-19

    A high-speed direct electron detection system is introduced to the field of transmission electron microscopy and applied to strain measurements in semiconductor nanostructures. In particular, a focused electron probe with a diameter of 0.5 nm was scanned over a fourfold quantum layer stack with alternating compressive and tensile strain and diffracted discs have been recorded on a scintillator-free direct electron detector with a frame time of 1 ms. We show that the applied algorithms can accurately detect Bragg beam positions despite a significant point spread each 300 kV electron causes during detection on the scintillator-free camera. For millisecond exposures, we find that strain can be measured with a precision of 1.3 Multiplication-Sign 10{sup -3}, enabling, e.g., strain mapping in a 100 Multiplication-Sign 100 nm{sup 2} region with 0.5 nm resolution in 40 s.

  8. Weak-beam scanning transmission electron microscopy for quantitative dislocation density measurement in steels.

    PubMed

    Yoshida, Kenta; Shimodaira, Masaki; Toyama, Takeshi; Shimizu, Yasuo; Inoue, Koji; Yoshiie, Toshimasa; Milan, Konstantinovic J; Gerard, Robert; Nagai, Yasuyoshi

    2017-01-17

    To evaluate dislocations induced by neutron irradiation, we developed a weak-beam scanning transmission electron microscopy (WB-STEM) system by installing a novel beam selector, an annular detector, a high-speed CCD camera and an imaging filter in the camera chamber of a spherical aberration-corrected transmission electron microscope. The capabilities of the WB-STEM with respect to wide-view imaging, real-time diffraction monitoring and multi-contrast imaging are demonstrated using typical reactor pressure vessel steel that had been used in an European nuclear reactor for 30 years as a surveillance test piece with a fluence of 1.09 × 10(20) neutrons cm(-)(2) The quantitatively measured size distribution (average loop size = 3.6 ± 2.1 nm), number density of the dislocation loops (3.6 × 10(22) m(-3)) and dislocation density (7.8 × 10(13) m m(-)(3)) were carefully compared with the values obtained via conventional weak-beam transmission electron microscopy studies. In addition, cluster analysis using atom probe tomography (APT) further demonstrated the potential of the WB-STEM for correlative electron tomography/APT experiments.

  9. Depth Sectioning with the Aberration-Corrected Scanning Transmission Electron Microscope

    SciTech Connect

    Borisevich, Albina Y; Lupini, Andrew R; Pennycook, Stephen J

    2006-01-01

    The ability to correct the aberrations of the probe-forming lens in the scanning transmission electron microscope provides not only a significant improvement in transverse resolution but in addition brings depth resolution at the nanometer scale. Aberration correction therefore opens up the possibility of 3D imaging by optical sectioning. Here we develop a definition for the depth resolution for scanning transmission electron microscope depth sectioning and present initial results from this method. Objects such as catalytic metal clusters and single atoms on various support materials are imaged in three dimensions with a resolution of several nanometers. Effective focal depth is determined by statistical analysis and the contributing factors are discussed. Finally, current challenges and future capabilities available through new instruments are discussed.

  10. Non-additive model for specific heat of electrons

    NASA Astrophysics Data System (ADS)

    Anselmo, D. H. A. L.; Vasconcelos, M. S.; Silva, R.; Mello, V. D.

    2016-10-01

    By using non-additive Tsallis entropy we demonstrate numerically that one-dimensional quasicrystals, whose energy spectra are multifractal Cantor sets, are characterized by an entropic parameter, and calculate the electronic specific heat, where we consider a non-additive entropy Sq. In our method we consider an energy spectra calculated using the one-dimensional tight binding Schrödinger equation, and their bands (or levels) are scaled onto the [ 0 , 1 ] interval. The Tsallis' formalism is applied to the energy spectra of Fibonacci and double-period one-dimensional quasiperiodic lattices. We analytically obtain an expression for the specific heat that we consider to be more appropriate to calculate this quantity in those quasiperiodic structures.

  11. High Cycle Fatigue in the Transmission Electron Microscope.

    PubMed

    Bufford, Daniel C; Stauffer, Douglas; Mook, William M; Syed Asif, S A; Boyce, Brad L; Hattar, Khalid

    2016-08-10

    One of the most common causes of structural failure in metals is fatigue induced by cyclic loading. Historically, microstructure-level analysis of fatigue cracks has primarily been performed post mortem. However, such investigations do not directly reveal the internal structural processes at work near micro- and nanoscale fatigue cracks and thus do not provide direct evidence of active microstructural mechanisms. In this study, the tension-tension fatigue behavior of nanocrystalline Cu was monitored in real time at the nanoscale by utilizing a new capability for quantitative cyclic mechanical loading performed in situ in a transmission electron microscope (TEM). Controllable loads were applied at frequencies from one to several hundred hertz, enabling accumulations of 10(6) cycles within 1 h. The nanometer-scale spatial resolution of the TEM allows quantitative fatigue crack growth studies at very slow crack growth rates, measured here at ∼10(-12) m·cycle(-1). This represents an incipient threshold regime that is well below the tensile yield stress and near the minimum conditions for fatigue crack growth. Evidence of localized deformation and grain growth within 150 nm of the crack tip was observed by both standard imaging and precession electron diffraction orientation mapping. These observations begin to reveal with unprecedented detail the local microstructural processes that govern damage accumulation, crack nucleation, and crack propagation during fatigue loading in nanocrystalline Cu.

  12. Nanomaterial datasets to advance tomography in scanning transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Levin, Barnaby D. A.; Padgett, Elliot; Chen, Chien-Chun; Scott, M. C.; Xu, Rui; Theis, Wolfgang; Jiang, Yi; Yang, Yongsoo; Ophus, Colin; Zhang, Haitao; Ha, Don-Hyung; Wang, Deli; Yu, Yingchao; Abruña, Hector D.; Robinson, Richard D.; Ercius, Peter; Kourkoutis, Lena F.; Miao, Jianwei; Muller, David A.; Hovden, Robert

    2016-06-01

    Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.

  13. Materials characterisation by angle-resolved scanning transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Müller-Caspary, Knut; Oppermann, Oliver; Grieb, Tim; Krause, Florian F.; Rosenauer, Andreas; Schowalter, Marco; Mehrtens, Thorsten; Beyer, Andreas; Volz, Kerstin; Potapov, Pavel

    2016-11-01

    Solid-state properties such as strain or chemical composition often leave characteristic fingerprints in the angular dependence of electron scattering. Scanning transmission electron microscopy (STEM) is dedicated to probe scattered intensity with atomic resolution, but it drastically lacks angular resolution. Here we report both a setup to exploit the explicit angular dependence of scattered intensity and applications of angle-resolved STEM to semiconductor nanostructures. Our method is applied to measure nitrogen content and specimen thickness in a GaNxAs1‑x layer independently at atomic resolution by evaluating two dedicated angular intervals. We demonstrate contrast formation due to strain and composition in a Si- based metal-oxide semiconductor field effect transistor (MOSFET) with GexSi1‑x stressors as a function of the angles used for imaging. To shed light on the validity of current theoretical approaches this data is compared with theory, namely the Rutherford approach and contemporary multislice simulations. Inconsistency is found for the Rutherford model in the whole angular range of 16–255 mrad. Contrary, the multislice simulations are applicable for angles larger than 35 mrad whereas a significant mismatch is observed at lower angles. This limitation of established simulations is discussed particularly on the basis of inelastic scattering.

  14. Thin dielectric film thickness determination by advanced transmission electron microscopy

    SciTech Connect

    Diebold, A.C.; Foran, B.; Kisielowski, C.; Muller, D.; Pennycook, S.; Principe, E.; Stemmer, S.

    2003-09-01

    High Resolution Transmission Electron Microscopy (HR-TEM) has been used as the ultimate method of thickness measurement for thin films. The appearance of phase contrast interference patterns in HR-TEM images has long been confused as the appearance of a crystal lattice by non-specialists. Relatively easy to interpret crystal lattice images are now directly observed with the introduction of annular dark field detectors for scanning TEM (STEM). With the recent development of reliable lattice image processing software that creates crystal structure images from phase contrast data, HR-TEM can also provide crystal lattice images. The resolution of both methods was steadily improved reaching now into the sub Angstrom region. Improvements in electron lens and image analysis software are increasing the spatial resolution of both methods. Optimum resolution for STEM requires that the probe beam be highly localized. In STEM, beam localization is enhanced by selection of the correct aperture. When STEM measurement is done using a highly localized probe beam, HR-TEM and STEM measurement of the thickness of silicon oxynitride films agree within experimental error. In this paper, the optimum conditions for HR-TEM and STEM measurement are discussed along with a method for repeatable film thickness determination. The impact of sample thickness is also discussed. The key result in this paper is the proposal of a reproducible method for film thickness determination.

  15. Nanomaterial datasets to advance tomography in scanning transmission electron microscopy

    PubMed Central

    Levin, Barnaby D.A.; Padgett, Elliot; Chen, Chien-Chun; Scott, M.C.; Xu, Rui; Theis, Wolfgang; Jiang, Yi; Yang, Yongsoo; Ophus, Colin; Zhang, Haitao; Ha, Don-Hyung; Wang, Deli; Yu, Yingchao; Abruña, Hector D.; Robinson, Richard D.; Ercius, Peter; Kourkoutis, Lena F.; Miao, Jianwei; Muller, David A.; Hovden, Robert

    2016-01-01

    Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data. PMID:27272459

  16. Materials characterisation by angle-resolved scanning transmission electron microscopy

    PubMed Central

    Müller-Caspary, Knut; Oppermann, Oliver; Grieb, Tim; Krause, Florian F.; Rosenauer, Andreas; Schowalter, Marco; Mehrtens, Thorsten; Beyer, Andreas; Volz, Kerstin; Potapov, Pavel

    2016-01-01

    Solid-state properties such as strain or chemical composition often leave characteristic fingerprints in the angular dependence of electron scattering. Scanning transmission electron microscopy (STEM) is dedicated to probe scattered intensity with atomic resolution, but it drastically lacks angular resolution. Here we report both a setup to exploit the explicit angular dependence of scattered intensity and applications of angle-resolved STEM to semiconductor nanostructures. Our method is applied to measure nitrogen content and specimen thickness in a GaNxAs1−x layer independently at atomic resolution by evaluating two dedicated angular intervals. We demonstrate contrast formation due to strain and composition in a Si- based metal-oxide semiconductor field effect transistor (MOSFET) with GexSi1−x stressors as a function of the angles used for imaging. To shed light on the validity of current theoretical approaches this data is compared with theory, namely the Rutherford approach and contemporary multislice simulations. Inconsistency is found for the Rutherford model in the whole angular range of 16–255 mrad. Contrary, the multislice simulations are applicable for angles larger than 35 mrad whereas a significant mismatch is observed at lower angles. This limitation of established simulations is discussed particularly on the basis of inelastic scattering. PMID:27849001

  17. Amyloid Structure and Assembly: Insights from Scanning Transmission Electron Microscopy

    SciTech Connect

    Goldsbury, C.; Wall, J.; Baxa, U.; Simon, M. N.; Steven, A. C.; Engel, A.; Aebi, U.; Muller, S. A.

    2011-01-01

    Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

  18. Combined scanning transmission electron microscopy tilt- and focal series.

    PubMed

    Dahmen, Tim; Baudoin, Jean-Pierre; Lupini, Andrew R; Kübel, Christian; Slusallek, Philipp; de Jonge, Niels

    2014-04-01

    In this study, a combined tilt- and focal series is proposed as a new recording scheme for high-angle annular dark-field scanning transmission electron microscopy (STEM) tomography. Three-dimensional (3D) data were acquired by mechanically tilting the specimen, and recording a through-focal series at each tilt direction. The sample was a whole-mount macrophage cell with embedded gold nanoparticles. The tilt-focal algebraic reconstruction technique (TF-ART) is introduced as a new algorithm to reconstruct tomograms from such combined tilt- and focal series. The feasibility of TF-ART was demonstrated by 3D reconstruction of the experimental 3D data. The results were compared with a conventional STEM tilt series of a similar sample. The combined tilt- and focal series led to smaller "missing wedge" artifacts, and a higher axial resolution than obtained for the STEM tilt series, thus improving on one of the main issues of tilt series-based electron tomography.

  19. Transmission electron microscope calibration methods for critical dimension standards

    NASA Astrophysics Data System (ADS)

    Orji, Ndubuisi G.; Dixson, Ronald G.; Garcia-Gutierrez, Domingo I.; Bunday, Benjamin D.; Bishop, Michael; Cresswell, Michael W.; Allen, Richard A.; Allgair, John A.

    2016-10-01

    One of the key challenges in critical dimension (CD) metrology is finding suitable dimensional calibration standards. The transmission electron microscope (TEM), which produces lattice-resolved images having scale traceability to the SI (International System of Units) definition of length through an atomic lattice constant, has gained wide usage in different areas of CD calibration. One such area is critical dimension atomic force microscope (CD-AFM) tip width calibration. To properly calibrate CD-AFM tip widths, errors in the calibration process must be quantified. Although the use of TEM for CD-AFM tip width calibration has been around for about a decade, there is still confusion on what should be considered in the uncertainty analysis. We characterized CD-AFM tip-width samples using high-resolution TEM and high angle annular dark field scanning TEM and two CD-AFMs that are implemented as reference measurement systems. The results are used to outline how to develop a rigorous uncertainty estimate for TEM/CD-AFM calibration, and to compare how information from the two electron microscopy modes are applied to practical CD-AFM measurements. The results also represent a separate validation of previous TEM/CD-AFM calibration. Excellent agreement was observed.

  20. High Resolution Transmission Electron Microscopy (HRTEM) of nanophase ferric oxides

    NASA Technical Reports Server (NTRS)

    Golden, D. C.; Morris, R. V.; Ming, D. W.; Lauer, H. V., Jr.

    1994-01-01

    Iron oxide minerals are the prime candidates for Fe(III) signatures in remotely sensed Martian surface spectra. Magnetic, Mossbauer, and reflectance spectroscopy have been carried out in the laboratory in order to understand the mineralogical nature of Martian analog ferric oxide minerals of submicron or nanometer size range. Out of the iron oxide minerals studied, nanometer sized ferric oxides are promising candidates for possible Martian spectral analogs. 'Nanophase ferric oxide (np-Ox)' is a generic term for ferric oxide/oxihydroxide particles having nanoscale (less than 10 nm) particle dimensions. Ferrihydrite, superparamagnetic particles of hematite, maghemite and goethite, and nanometer sized particles of inherently paramagnetic lepidocrocite are all examples of nanophase ferric oxides. np-Ox particles in general do not give X-ray diffraction (XRD) patterns with well defined peaks and would often be classified as X-ray amorphous. Therefore, different np-Oxs preparations should be characterized using a more sensitive technique e.g., high resolution transmission electron microscopy (HRTEM). The purpose of this study is to report the particle size, morphology and crystalline order, of five np-Ox samples by HRTEM imaging and electron diffraction (ED).

  1. Amyloid structure and assembly: insights from scanning transmission electron microscopy.

    PubMed

    Goldsbury, Claire; Baxa, Ulrich; Simon, Martha N; Steven, Alasdair C; Engel, Andreas; Wall, Joseph S; Aebi, Ueli; Müller, Shirley A

    2011-01-01

    Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

  2. Nanomaterial datasets to advance tomography in scanning transmission electron microscopy.

    PubMed

    Levin, Barnaby D A; Padgett, Elliot; Chen, Chien-Chun; Scott, M C; Xu, Rui; Theis, Wolfgang; Jiang, Yi; Yang, Yongsoo; Ophus, Colin; Zhang, Haitao; Ha, Don-Hyung; Wang, Deli; Yu, Yingchao; Abruña, Hector D; Robinson, Richard D; Ercius, Peter; Kourkoutis, Lena F; Miao, Jianwei; Muller, David A; Hovden, Robert

    2016-06-07

    Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.

  3. Materials characterisation by angle-resolved scanning transmission electron microscopy.

    PubMed

    Müller-Caspary, Knut; Oppermann, Oliver; Grieb, Tim; Krause, Florian F; Rosenauer, Andreas; Schowalter, Marco; Mehrtens, Thorsten; Beyer, Andreas; Volz, Kerstin; Potapov, Pavel

    2016-11-16

    Solid-state properties such as strain or chemical composition often leave characteristic fingerprints in the angular dependence of electron scattering. Scanning transmission electron microscopy (STEM) is dedicated to probe scattered intensity with atomic resolution, but it drastically lacks angular resolution. Here we report both a setup to exploit the explicit angular dependence of scattered intensity and applications of angle-resolved STEM to semiconductor nanostructures. Our method is applied to measure nitrogen content and specimen thickness in a GaNxAs1-x layer independently at atomic resolution by evaluating two dedicated angular intervals. We demonstrate contrast formation due to strain and composition in a Si- based metal-oxide semiconductor field effect transistor (MOSFET) with GexSi1-x stressors as a function of the angles used for imaging. To shed light on the validity of current theoretical approaches this data is compared with theory, namely the Rutherford approach and contemporary multislice simulations. Inconsistency is found for the Rutherford model in the whole angular range of 16-255 mrad. Contrary, the multislice simulations are applicable for angles larger than 35 mrad whereas a significant mismatch is observed at lower angles. This limitation of established simulations is discussed particularly on the basis of inelastic scattering.

  4. High cycle fatigue in the transmission electron microscope

    DOE PAGES

    Bufford, Daniel C.; Stauffer, Douglas; Mook, William M.; ...

    2016-06-28

    One of the most common causes of structural failure in metals is fatigue induced by cyclic loading. Historically, microstructure-level analysis of fatigue cracks has primarily been performed post mortem. However, such investigations do not directly reveal the internal structural processes at work near micro- and nanoscale fatigue cracks and thus do not provide direct evidence of active microstructural mechanisms. In this paper, the tension–tension fatigue behavior of nanocrystalline Cu was monitored in real time at the nanoscale by utilizing a new capability for quantitative cyclic mechanical loading performed in situ in a transmission electron microscope (TEM). Controllable loads were appliedmore » at frequencies from one to several hundred hertz, enabling accumulations of 106 cycles within 1 h. The nanometer-scale spatial resolution of the TEM allows quantitative fatigue crack growth studies at very slow crack growth rates, measured here at ~10–12 m·cycle–1. This represents an incipient threshold regime that is well below the tensile yield stress and near the minimum conditions for fatigue crack growth. Evidence of localized deformation and grain growth within 150 nm of the crack tip was observed by both standard imaging and precession electron diffraction orientation mapping. Finally, these observations begin to reveal with unprecedented detail the local microstructural processes that govern damage accumulation, crack nucleation, and crack propagation during fatigue loading in nanocrystalline Cu.« less

  5. High cycle fatigue in the transmission electron microscope

    SciTech Connect

    Bufford, Daniel C.; Stauffer, Douglas; Mook, William M.; Syed Asif, S. A.; Boyce, Brad L.; Hattar, Khalid

    2016-06-28

    One of the most common causes of structural failure in metals is fatigue induced by cyclic loading. Historically, microstructure-level analysis of fatigue cracks has primarily been performed post mortem. However, such investigations do not directly reveal the internal structural processes at work near micro- and nanoscale fatigue cracks and thus do not provide direct evidence of active microstructural mechanisms. In this paper, the tension–tension fatigue behavior of nanocrystalline Cu was monitored in real time at the nanoscale by utilizing a new capability for quantitative cyclic mechanical loading performed in situ in a transmission electron microscope (TEM). Controllable loads were applied at frequencies from one to several hundred hertz, enabling accumulations of 106 cycles within 1 h. The nanometer-scale spatial resolution of the TEM allows quantitative fatigue crack growth studies at very slow crack growth rates, measured here at ~10–12 m·cycle–1. This represents an incipient threshold regime that is well below the tensile yield stress and near the minimum conditions for fatigue crack growth. Evidence of localized deformation and grain growth within 150 nm of the crack tip was observed by both standard imaging and precession electron diffraction orientation mapping. Finally, these observations begin to reveal with unprecedented detail the local microstructural processes that govern damage accumulation, crack nucleation, and crack propagation during fatigue loading in nanocrystalline Cu.

  6. Transmission Electron Diffraction Studies of Xenon Adsorbed on Graphite.

    NASA Astrophysics Data System (ADS)

    Faisal, A. Q. D.

    1987-09-01

    Available from UMI in association with The British Library. Adsorption studies of xenon on graphite were performed using the Hitachi HU-11B Transmission Electron Microscope (TEM). It has been used as a Transmission High Energy Electron Diffraction (THEED) camera. This has been modified to include an Ultra High Vacuum (UHV) environmental chamber. This chamber was isolated from the microscope vacuum by two 400 μm diameter differentially pumped apertures. Pressures of {~}10 ^{-6} torr and {~ }10^{-9} torr were achieved inside the microscope column and the environmental chamber respectively. The chamber was fitted with a new sample holder designed with double "O" rings. The sample was cooled with liquid helium. Previous THEED experiments by Venables et al and Schabes-Retchkiman and Venables revealed the presence of a 2D-solid incommensurate (I)-commensurate (C) phase transition as the temperature is lowered. These results were confirmed and extended in the present work. Hong et al have recently interpreted their X-ray diffraction experiments as showing an incommensurate-striped domain phase transition at {~}65rm K. No evidence was found for the existence of a striped domain structure on any part of the xenon phase diagram studied. Experiments of xenon adsorbed on the basal plane (0001) of graphite were carried out at pressures from {~}1.5 times 10^{-5} torr to {~}1.8 times 10^{-8} torr over a temperature range from 55K^.90K. A set of lattice parameter (misfit) measurements were made as a function of temperature at constant pressure with an accuracy of +/-0.1% rather than +/-0.3% previously obtained. The misfit data was fitted to a power law formula, i.e. misfit m = B_{rm o} (rm T - rm T_{rm o})^{rm A} , where A is a constant and equal to 0.8. It was found that B_{rm o} and T_{rm o} are functions of log(P). The data fell into two groups corresponding to two phase transitions. The same power law was used for both sets of data. Two transitions were found, one is I-C and

  7. Ultrahigh-Resolution Scanning Transmission Electron Microscopy with Sub-Angstrom-Sized Electron Beams

    SciTech Connect

    Abe, E.; Pennycook, Stephen J

    2005-01-01

    The scanning transmission electron microscope (STEM) with an annular dark-field (ADF) detector provides atomic-resolution incoherent images, whose resolution is dominated, to a good approximation, by the size of convergent electron beams. Improving a spherical aberration of microscope objective lenses has been successful in converging the beam into sub-angstrom scale, promising a remarkably higher resolution for STEM. Here we describe the performance of aberration-corrected 300kV-STEM-the world-best STEM available today. The results clearly demonstrate that a sub-angstrom resolution has been indeed achieved for not only simple structures but also structurally complex systems (quasicrystals).

  8. Transmission Electron Microscopy of Magnetite Plaquettes in Orgueil

    NASA Technical Reports Server (NTRS)

    Chan, Q. H. S.; Han, J.; Zolensky, M.

    2016-01-01

    Magnetite sometimes takes the form of a plaquette - barrel-shaped stack of magnetite disks - in carbonaceous chondrites (CC) that show evidence of aqueous alteration. The asymmetric nature of the plaquettes caused Pizzarello and Groy to propose magnetite plaquettes as a naturally asymmetric mineral that can indroduce symmetry-breaking in organic molecules. Our previous synchrotron X-ray computed microtomography (SXRCT) and electron backscatter diffraction (EBSD) analyses of the magnetite plaquettes in fifteen CCs indicate that magnetite plaquettes are composed of nearly parallel discs, and the crystallographic orientations of the discs change around a rotational axis normal to the discs surfaces. In order to further investigate the nanostructures of magnetite plaquettes, we made two focused ion beam (FIB) sections of nine magnetite plaquettes from a thin section of CI Orgueil for transmission electron microscope (TEM) analysis. The X-ray spectrum imaging shows that the magnetite discs are purely iron oxide Fe3O4 (42.9 at% Fe and 57.1 at% O), which suggest that the plaquettes are of aqueous origin as it is difficult to form pure magnetite as a nebular condensate. The selected area electron diffraction (SAED) patterns acquired across the plaquettes show that the magnetite discs are single crystals. SEM and EBSD analyses suggest that the planar surfaces of the magnetite discs belong to the {100} planes of the cubic inverse spinel structure, which are supported by our TEM observations. Kerridge et al. suggested that the epitaxial relationship between magnetite plaquette and carbonate determines the magnetite face. However, according to our TEM observation, the association of magnetite with porous networks of phyllosilicate indicates that the epitaxial relationship with carbonate is not essential to the formation of magnetite plaquettes. It was difficult to determine the preferred rotational orientation of the plaquettes due to the symmetry of the cubic structure

  9. Spatial Resolution in Scanning Electron Microscopy and Scanning Transmission Electron Microscopy Without a Specimen Vacuum Chamber.

    PubMed

    Nguyen, Kayla X; Holtz, Megan E; Richmond-Decker, Justin; Muller, David A

    2016-08-01

    A long-standing goal of electron microscopy has been the high-resolution characterization of specimens in their native environment. However, electron optics require high vacuum to maintain an unscattered and focused probe, a challenge for specimens requiring atmospheric or liquid environments. Here, we use an electron-transparent window at the base of a scanning electron microscope's objective lens to separate column vacuum from the specimen, enabling imaging under ambient conditions, without a specimen vacuum chamber. We demonstrate in-air imaging of specimens at nanoscale resolution using backscattered scanning electron microscopy (airSEM) and scanning transmission electron microscopy. We explore resolution and contrast using Monte Carlo simulations and analytical models. We find that nanometer-scale resolution can be obtained at gas path lengths up to 400 μm, although contrast drops with increasing gas path length. As the electron-transparent window scatters considerably more than gas at our operating conditions, we observe that the densities and thicknesses of the electron-transparent window are the dominant limiting factors for image contrast at lower operating voltages. By enabling a variety of detector configurations, the airSEM is applicable to a wide range of environmental experiments including the imaging of hydrated biological specimens and in situ chemical and electrochemical processes.

  10. Characterizations of Preheated and Non-Preheated HY-80 Steel Weldments by Transmission Electron Microscopy.

    DTIC Science & Technology

    1983-09-01

    D- 36 966 CHARACTERIZATIONS OF PREHEATED AND NON-PREHEATED HY-80 i/I • " STEEL NELDMENTS BY TRANSMISSION ELECTRON MICROSCOPY(U) C T T NAVAL...34. NAVAL POSTGRADUATE SCHOOL Monterey, California THESIS CHARACTERIZATIONS OF PREHEATED AND NON-PREHEATED HY-80 STEEL WELDMENTS BY TRANSMISSION ELECTRON...Master’s Thesis; Non-Preheated HY-80 Steel Weldments September 1983 by Transmission Electron Microscopy S. PERFORMING ONG. REPORT NUMBER 7. ATNOR"a S

  11. Sample thickness determination by scanning transmission electron microscopy at low electron energies.

    PubMed

    Volkenandt, Tobias; Müller, Erich; Gerthsen, Dagmar

    2014-02-01

    Sample thickness is a decisive parameter for any quantification of image information and composition in transmission electron microscopy. In this context, we present a method to determine the local sample thickness by scanning transmission electron microscopy at primary energies below 30 keV. The image intensity is measured with respect to the intensity of the incident electron beam and can be directly compared with Monte Carlo simulations. Screened Rutherford and Mott scattering cross-sections are evaluated with respect to fitting experimental data with simulated image intensities as a function of the atomic number of the sample material and primary electron energy. The presented method is tested for sample materials covering a wide range of atomic numbers Z, that is, fluorenyl hexa-peri-hexabenzocoronene (Z = 3.5), carbon (Z = 6), silicon (Z = 14), gallium nitride (Z = 19), and tungsten (Z = 74). Investigations were conducted for two primary energies (15 and 30 keV) and a sample thickness range between 50 and 400 nm.

  12. In situ transmission electron microscopy experimentation of nanostructured materials

    NASA Astrophysics Data System (ADS)

    Alducin, Diego

    Due to the remarkable mechanical and electrical properties some nanostructured materials possess, it is important to be able to quantitatively characterize how these materials react under different types of stimulus. In situ transmission electron microscopy is a unique technique that allows the user to fully observe and record the crystallographic behavior of such materials undergoing a variety of tests. The crystallographic orientations silver nanowires were mapped in order to understand the structure and facets due to its geometry. Measuring the toughness and yield of the material led us to understand the anisotropic behavior of AgNWs. Depending on whether a load is applied to either a boundary between facets or on a facet will change the mechanical strength of the nanowire. By measuring the resistivity of the this material during deformation has also led us to understand that the intrinsic defects in the crystal structure of nanowires will change the way the material reacts to an electric potential. We have been also able to completely map the crystallographic orientations of very complex geometries of gold nanoparticles and characterize the weak forces involved in the manipulation if these nanoparticles. Finally, the elasticity of MoS2 was tested and found to be exponentially dependent upon the thickness of the nanosheets. However, the resistivity of this material does not seem to be affected by any type of deformation it is subjected to. The complete categorization of how materials interact with external stimulus while comparing the changes observed in its crystal structure is essential to understanding the underlying properties of nanostructured materials, which would not be possible without in situ transmisison electron microscopy experimentation.

  13. Scanning transmission electron microscopy methods for the analysis of nanoparticles.

    PubMed

    Ponce, Arturo; Mejía-Rosales, Sergio; José-Yacamán, Miguel

    2012-01-01

    Here we review the scanning transmission electron microscopy (STEM) characterization technique and STEM imaging methods. We describe applications of STEM for studying inorganic nanoparticles, and other uses of STEM in biological and health sciences and discuss how to interpret STEM results. The STEM imaging mode has certain benefits compared with the broad-beam illumination mode; the main advantage is the collection of the information about the specimen using a high angular annular dark field (HAADF) detector, in which the images registered have different levels of contrast related to the chemical composition of the sample. Another advantage of its use in the analysis of biological samples is its contrast for thick stained sections, since HAADF images of samples with thickness of 100-120 nm have notoriously better contrast than those obtained by other techniques. Combining the HAADF-STEM imaging with the new aberration correction era, the STEM technique reaches a direct way to imaging the atomistic structure and composition of nanostructures at a sub-angstrom resolution. Thus, alloying in metallic nanoparticles is directly resolved at atomic scale by the HAADF-STEM imaging, and the comparison of the STEM images with results from simulations gives a very powerful way of analysis of structure and composition. The use of X-ray energy dispersive spectroscopy attached to the electron microscope for STEM mode is also described. In issues where characterization at the atomic scale of the interaction between metallic nanoparticles and biological systems is needed, all the associated techniques to STEM become powerful tools for the best understanding on how to use these particles in biomedical applications.

  14. A Monte Carlo investigation of contaminant electrons due to a novel in vivo transmission detector.

    PubMed

    Asuni, G; Jensen, J M; McCurdy, B M C

    2011-02-21

    A novel transmission detector (IBA Dosimetry, Germany) developed as an IMRT quality assurance tool, intended for in vivo patient dose measurements, is studied here. The goal of this investigation is to use Monte Carlo techniques to characterize treatment beam parameters in the presence of the detector and to compare to those of a plastic block tray (a frequently used clinical device). Particular attention is paid to the impact of the detector on electron contamination model parameters of two commercial dose calculation algorithms. The linac head together with the COMPASS transmission detector (TRD) was modeled using BEAMnrc code. To understand the effect of the TRD on treatment beams, the contaminant electron fluence, energy spectra, and angular distributions at different SSDs were analyzed for open and non-open (i.e. TRD and block tray) fields. Contaminant electrons in the BEAMnrc simulations were separated according to where they were created. Calculation of surface dose and the evaluation of contributions from contaminant electrons were performed using the DOSXYZnrc user code. The effect of the TRD on contaminant electrons model parameters in Eclipse AAA and Pinnacle(3) dose calculation algorithms was investigated. Comparisons of the fluence of contaminant electrons produced in the non-open fields versus open field show that electrons created in the non-open fields increase at shorter SSD, but most of the electrons at shorter SSD are of low energy with large angular spread. These electrons are out-scattered or absorbed in air and contribute less to surface dose at larger SSD. Calculated surface doses with the block tray are higher than those with the TRD. Contribution of contaminant electrons to dose in the buildup region increases with increasing field size. The additional contribution of electrons to surface dose increases with field size for TRD and block tray. The introduction of the TRD results in a 12% and 15% increase in the Gaussian widths used in the

  15. In Situ Microstructural Control and Mechanical Testing Inside the Transmission Electron Microscope at Elevated Temperatures

    NASA Astrophysics Data System (ADS)

    Wang, Baoming; Haque, M. A.

    2015-08-01

    With atomic-scale imaging and analytical capabilities such as electron diffraction and energy-loss spectroscopy, the transmission electron microscope has allowed access to the internal microstructure of materials like no other microscopy. It has been mostly a passive or post-mortem analysis tool, but that trend is changing with in situ straining, heating and electrical biasing. In this study, we design and demonstrate a multi-functional microchip that integrates actuators, sensors, heaters and electrodes with freestanding electron transparent specimens. In addition to mechanical testing at elevated temperatures, the chip can actively control microstructures (grain growth and phase change) of the specimen material. Using nano-crystalline aluminum, nickel and zirconium as specimen materials, we demonstrate these novel capabilities inside the microscope. Our approach of active microstructural control and quantitative testing with real-time visualization can influence mechanistic modeling by providing direct and accurate evidence of the fundamental mechanisms behind materials behavior.

  16. Probing electron beam effects with chemoresistive nanosensors during in situ environmental transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Steinhauer, S.; Wang, Z.; Zhou, Z.; Krainer, J.; Köck, A.; Nordlund, K.; Djurabekova, F.; Grammatikopoulos, P.; Sowwan, M.

    2017-02-01

    We report in situ and ex situ fabrication approaches to construct p-type (CuO) and n-type (SnO2) metal oxide nanowire devices for operation inside an environmental transmission electron microscope (TEM). By taking advantage of their chemoresistive properties, the nanowire devices were employed as sensitive probes for detecting reactive species induced by the interactions of high-energy electrons with surrounding gas molecules, in particular, for the case of O2 gas pressures up to 20 mbar. In order to rationalize our experimental findings, a computational model based on the particle-in-cell method was implemented to calculate the spatial distributions of scattered electrons and ionized oxygen species in the environmental TEM. Our approach enables the a priori identification and qualitative measurement of undesirable beam effects, paving the way for future developments related to their mitigation.

  17. Spatial resolution and information transfer in scanning transmission electron microscopy.

    PubMed

    Peng, Yiping; Oxley, Mark P; Lupini, Andrew R; Chisholm, Matthew F; Pennycook, Stephen J

    2008-02-01

    The relation between image resolution and information transfer is explored. It is shown that the existence of higher frequency transfer in the image is just a necessary but not sufficient condition for the achievement of higher resolution. Adopting a two-point resolution criterion, we suggest that a 10% contrast level between two features in an image should be used as a practical definition of resolution. In the context of scanning transmission electron microscopy, it is shown that the channeling effect does not have a direct connection with image resolution because sharp channeling peaks do not move with the scanning probe. Through a quantitative comparison between experimental image and simulation, a Fourier-space approach is proposed to estimate defocus and sample thickness. The effective atom size in Z-contrast imaging depends on the annular detector's inner angle. Therefore, an optimum angle exists for the highest resolution as a trade-off between reduced atom size and reduced signal with limited information transfer due to noise.

  18. Rapid diagnosis of plant virus diseases by transmission electron microscopy.

    PubMed

    Zechmann, Bernd; Zellnig, Günther

    2009-12-01

    A clear and rapid diagnosis of plant virus diseases is of great importance for agriculture and scientific experiments in plant phytopathology. Even though negative staining and transmission electron microscopy (TEM) are often used for detection and identification of viral particles and provide rapid and reliable results, it is necessary to examine ultrastructural changes induced by viruses for clear identification of the disease. With conventional sample preparation for TEM it can take several days to obtain ultrastructural results and it is therefore not suitable for rapid diagnosis of virus diseases of plants. The use of microwave irradiation can reduce the time for sample preparation for TEM investigations. Two model virus-plant systems [Nicotiana tabacum plants infected with Tobacco mosaic virus (TMV), Cucurbita pepo plants infected with Zucchini yellow mosaic virus (ZYMV)] demonstrate that it is possible to diagnose ultrastructural alterations induced by viruses in less than half a day by using microwave irradiation for preparation of samples. Negative staining of the sap of plants infected with TMV and ZYMV and the examination of ultrastructure and size were also carried out during sample preparation thus permitting diagnosis of the viral agent by TEM in a few hours. These methods will contribute towards a rapid and clear identification of virus diseases of plants and will be useful for diagnostic purposes in agriculture and in plant phytopathology.

  19. Characterization of paired helical filaments by scanning transmission electron microscopy.

    PubMed

    Ksiezak-Reding, Hanna; Wall, Joseph S

    2005-07-01

    Paired helical filaments (PHFs) are abnormal twisted filaments composed of hyperphosphorylated tau protein. They are found in Alzheimer's disease and other neurodegenerative disorders designated as tauopathies. They are a major component of intracellular inclusions known as neurofibrillary tangles (NFTs). The objective of this review is to summarize various structural studies of PHFs in which using scanning transmission electron microscopy (STEM) has been particularly informative. STEM provides shape and mass per unit length measurements important for studying ultrastructural aspects of filaments. These include quantitative comparisons between dispersed and aggregated populations of PHFs as well as comparative studies of PHFs in Alzheimer's disease and other neurodegenerative disorders. Other approaches are also discussed if relevant or complementary to studies using STEM, e.g., application of a novel staining reagent, Nanovan. Our understanding of the PHF structure and the development of PHFs into NFTs is presented from a historical perspective. Others goals are to describe the biochemical and ultrastructural complexity of authentic PHFs, to assess similarities between authentic and synthetic PHFs, and to discuss recent advances in PHF modeling.

  20. Low Voltage Transmission Electron Microscopy in Cell Biology.

    PubMed

    Bendayan, Moise; Paransky, Eugene

    2015-07-01

    Low voltage transmission electron microscopy (LVTEM) was employed to examine biological tissues with accelerating voltages as low as 5kV. Tissue preparation was modified to take advantage of the low-voltage techniques. Treatments with heavy metals, such as post-fixation with osmium tetroxide, on block and counterstaining were omitted. Sections (40nm) were thinner than usual and generated highly contrasted images. General appearance of the cells remains similar to that of conventional TEM. New features were however revealed. The matrix of the pancreatic granules displays heterogeneity with partitions that may correspond to the inner-segregation of their secretory proteins. Mitochondria revealed the presence of the ATP synthase granules along their cristea. The nuclear dense chromatin displayed a honeycomb organization while distinct beads, nucleosomes, aligned along thin threads were seen in the dispersed chromatin. Nuclear pore protein complexes revealed their globular nature. The intercalated disks in cardiac muscle displayed their fine structural organization. These features correlate well with data described or predicted by cell and molecular biology. These new aspects are not revealed when thicker and conventionally osmicated tissue sections were examined by LVTEM, indicating that major masking effects are associated with standard TEM techniques. Immunogold was adapted to LVTEM further enhancing its potential in cell biology.

  1. Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

    SciTech Connect

    Tremsin, Anton S.; Gao, Yan; Dial, Laura C.; Grazzi, Francesco; Shinohara, Takenao

    2016-07-08

    Non-destructive testing techniques based on neutron imaging and diffraction can provide information on the internal structure of relatively thick metal samples (up to several cm), which are opaque to other conventional non-destructive methods. Spatially resolved neutron transmission spectroscopy is an extension of traditional neutron radiography, where multiple images are acquired simultaneously, each corresponding to a narrow range of energy. The analysis of transmission spectra enables studies of bulk microstructures at the spatial resolution comparable to the detector pixel. In this study we demonstrate the possibility of imaging (with ~100 μm resolution) distribution of some microstructure properties, such as residual strain, texture, voids and impurities in Inconel 625 samples manufactured with an additive manufacturing method called direct metal laser melting (DMLM). Although this imaging technique can be implemented only in a few large-scale facilities, it can be a valuable tool for optimization of additive manufacturing techniques and materials and for correlating bulk microstructure properties to manufacturing process parameters. Additionally, the experimental strain distribution can help validate finite element models which many industries use to predict the residual stress distributions in additive manufactured components.

  2. Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy.

    PubMed

    Tremsin, Anton S; Gao, Yan; Dial, Laura C; Grazzi, Francesco; Shinohara, Takenao

    2016-01-01

    Non-destructive testing techniques based on neutron imaging and diffraction can provide information on the internal structure of relatively thick metal samples (up to several cm), which are opaque to other conventional non-destructive methods. Spatially resolved neutron transmission spectroscopy is an extension of traditional neutron radiography, where multiple images are acquired simultaneously, each corresponding to a narrow range of energy. The analysis of transmission spectra enables studies of bulk microstructures at the spatial resolution comparable to the detector pixel. In this study we demonstrate the possibility of imaging (with ~100 μm resolution) distribution of some microstructure properties, such as residual strain, texture, voids and impurities in Inconel 625 samples manufactured with an additive manufacturing method called direct metal laser melting (DMLM). Although this imaging technique can be implemented only in a few large-scale facilities, it can be a valuable tool for optimization of additive manufacturing techniques and materials and for correlating bulk microstructure properties to manufacturing process parameters. In addition, the experimental strain distribution can help validate finite element models which many industries use to predict the residual stress distributions in additive manufactured components.

  3. Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

    DOE PAGES

    Tremsin, Anton S.; Gao, Yan; Dial, Laura C.; ...

    2016-07-08

    Non-destructive testing techniques based on neutron imaging and diffraction can provide information on the internal structure of relatively thick metal samples (up to several cm), which are opaque to other conventional non-destructive methods. Spatially resolved neutron transmission spectroscopy is an extension of traditional neutron radiography, where multiple images are acquired simultaneously, each corresponding to a narrow range of energy. The analysis of transmission spectra enables studies of bulk microstructures at the spatial resolution comparable to the detector pixel. In this study we demonstrate the possibility of imaging (with ~100 μm resolution) distribution of some microstructure properties, such as residual strain,more » texture, voids and impurities in Inconel 625 samples manufactured with an additive manufacturing method called direct metal laser melting (DMLM). Although this imaging technique can be implemented only in a few large-scale facilities, it can be a valuable tool for optimization of additive manufacturing techniques and materials and for correlating bulk microstructure properties to manufacturing process parameters. Additionally, the experimental strain distribution can help validate finite element models which many industries use to predict the residual stress distributions in additive manufactured components.« less

  4. Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

    PubMed Central

    Tremsin, Anton S.; Gao, Yan; Dial, Laura C.; Grazzi, Francesco; Shinohara, Takenao

    2016-01-01

    Abstract Non-destructive testing techniques based on neutron imaging and diffraction can provide information on the internal structure of relatively thick metal samples (up to several cm), which are opaque to other conventional non-destructive methods. Spatially resolved neutron transmission spectroscopy is an extension of traditional neutron radiography, where multiple images are acquired simultaneously, each corresponding to a narrow range of energy. The analysis of transmission spectra enables studies of bulk microstructures at the spatial resolution comparable to the detector pixel. In this study we demonstrate the possibility of imaging (with ~100 μm resolution) distribution of some microstructure properties, such as residual strain, texture, voids and impurities in Inconel 625 samples manufactured with an additive manufacturing method called direct metal laser melting (DMLM). Although this imaging technique can be implemented only in a few large-scale facilities, it can be a valuable tool for optimization of additive manufacturing techniques and materials and for correlating bulk microstructure properties to manufacturing process parameters. In addition, the experimental strain distribution can help validate finite element models which many industries use to predict the residual stress distributions in additive manufactured components. PMID:27877885

  5. Modest additive effects of integrated vector control measures on malaria prevalence and transmission in western Kenya

    PubMed Central

    2013-01-01

    Background The effect of integrating vector larval intervention on malaria transmission is unknown when insecticide-treated bed-net (ITN) coverage is very high, and the optimal indicator for intervention evaluation needs to be determined when transmission is low. Methods A post hoc assignment of intervention-control cluster design was used to assess the added effect of both indoor residual spraying (IRS) and Bacillus-based larvicides (Bti) in addition to ITN in the western Kenyan highlands in 2010 and 2011. Cross-sectional, mass parasite screenings, adult vector populations, and cohort of active case surveillance (ACS) were conducted before and after the intervention in three study sites with two- to three-paired intervention-control clusters at each site each year. The effect of larviciding, IRS, ITNs and other determinants of malaria risk was assessed by means of mixed estimating methods. Results Average ITN coverage increased from 41% in 2010 to 92% in 2011 in the study sites. IRS intervention had significant added impact on reducing vector density in 2010 but the impact was modest in 2011. The effect of IRS on reducing parasite prevalence was significant in 2011 but was seasonal specific in 2010. ITN was significantly associated with parasite densities in 2010 but IRS application was significantly correlated with reduced gametocyte density in 2011. IRS application reduced about half of the clinical malaria cases in 2010 and about one-third in 2011 compare to non-intervention areas. Conclusion Compared with a similar study conducted in 2005, the efficacy of the current integrated vector control with ITN, IRS, and Bti reduced three- to five-fold despite high ITN coverage, reflecting a modest added impact on malaria transmission. Additional strategies need to be developed to further reduce malaria transmission. PMID:23870708

  6. Carbon contamination in scanning transmission electron microscopy and its impact on phase-plate applications.

    PubMed

    Hettler, Simon; Dries, Manuel; Hermann, Peter; Obermair, Martin; Gerthsen, Dagmar; Malac, Marek

    2017-05-01

    We analyze electron-beam induced carbon contamination in a transmission electron microscope. The study is performed on thin films potentially suitable as phase plates for phase-contrast transmission electron microscopy. Electron energy-loss spectroscopy and phase-plate imaging is utilized to analyze the contamination. The deposited contamination layer is identified as a graphitic carbon layer which is not prone to electrostatic charging whereas a non-conductive underlying substrate charges. Several methods that inhibit contamination are evaluated and the impact of carbon contamination on phase-plate imaging is discussed. The findings are in general interesting for scanning transmission electron microscopy applications.

  7. Transmission electron microscopy characterization of microstructural features of Al-Li-Cu alloys

    NASA Technical Reports Server (NTRS)

    Avalos-Borja, M.; Pizzo, P. P.; Larson, L. A.

    1983-01-01

    A transmission electron microscopy (TEM) examination of aluminum-lithium-copper alloys was conducted. The principal purpose is to characterize the nature, size, and distribution of stringer particles which result from the powder metallurgy (P/M) processing of these alloys. Microstructural features associated with the stringer particles are reported that help explain the stress corrosion susceptibility of the powder metallurgy-processed Al-Li-Cu alloys. In addition, matrix precipitation events are documented for a variety of heat treatments and process variations. Hot rolling is observed to significant alter the nature of matrix precipitation, and the observations are correlated with concomitant mechanical property variations.

  8. Transmission electron microscopy characterization of microstructural features in aluminum-lithium-copper alloys

    NASA Technical Reports Server (NTRS)

    Avalos-Borja, M.; Larson, L. A.; Pizzo, P. P.

    1984-01-01

    A transmission electron microscopy (TEM) examination of aluminum-lithium-copper alloys was conducted. The principal purpose is to characterize the nature, size, and distribution of stringer particles which result from the powder metallurgy (P/M) processing of these alloys. Microstructural features associated with the stringer particles are reported that help explain the stress corrosion susceptibility of the powder metallurgy-processed Al-Li-Cu alloys. In addition, matrix precipitaton events are documented for a variety of heat treatments and process variations. Hot rolling is observed to significantly alter the nature of matrix precipitation, and the observations are correlated with concomitant mechanical property variations.

  9. Heterogeneous Distribution of Carbonaceous Material in Murchison Matrix: In Situ Observations Using Energy Filtered Transmission Electron Microscopy

    NASA Technical Reports Server (NTRS)

    Brearley, Adrian J.

    2002-01-01

    Energy filtered TEM (Transmission Electron Microscopy) has been used to study the location of carbonaceous material in situ in Murchison matrix. Carbon occurs frequently as narrow rims around sulfide grains, but is rare in regions of matrix that are dominated by phyllosilicates. Additional information is contained in the original extended abstract.

  10. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for technologies for electronic transmission of orders. 1311.05 Section 1311.05 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF... technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to...

  11. Transmission electron microscopy of subsolidus oxidation and weathering of olivine

    USGS Publications Warehouse

    Banfield, J.F.; Veblen, D.R.; Jones, B.F.

    1990-01-01

    Olivine crystals in basaltic andesites which crop out in the Abert Rim, south-central Oregon have been studied by high-resolution and analytical transmission electron microscopy. The observations reveal three distinct assemblages of alteration products that seem to correspond to three episodes of olivine oxidation. The olivine crystals contain rare, dense arrays of coherently intergrown Ti-free magnetite and inclusions of a phase inferred to be amorphous silica. We interpret this first assemblage to be the product of an early subsolidus oxidation event in the lava. The second olivine alteration assemblage contains complex ordered intergrowths on (001) of forsterite-rich olivine and laihunite (distorted olivine structure with Fe3+ charge balanced by vacancies). Based on experimental results for laihunite synthesis (Kondoh et al. 1985), these intergrowths probably formed by olivine oxidation between 400 and 800??C. The third episode of alteration involves the destruction of olivine by low-temperature hydrothermal alteration and weathering. Elongate etch-pits and channels in the margins of fresh olivine crystals contain semi-oriented bands of smectite. Olivine weathers to smectite and hematite, and subsequently to arrays of oriented hematite crystals. The textures resemble those reported by Eggleton (1984) and Smith et al. (1987). We find no evidence for a metastable phase intermediate between olivine and smectite ("M" - Eggleton 1984). The presence of laihunite exerts a strong control on the geometry of olivine weathering. Single laihunite layers and laihunite-forsteritic olivine intergrowths increase the resistance of crystals to weathering. Preferential development of channels between laihunite layers occurs where growth of laihunite produced compositional variations in olivine, rather than where coherency-strain is associated with laihunite-olivine interfaces. ?? 1990 Springer-Verlag.

  12. Advanced fertility diagnosis in stallion semen using transmission electron microscopy.

    PubMed

    Pesch, Sandra; Bostedt, Hartwig; Failing, Klaus; Bergmann, Martin

    2006-02-01

    Routine semen analysis of stallions is based on light microscopy (LM). However, there are still a number of animals that are subfertile or even infertile not being identified with conventional semen analysis. The objective of this study was to investigate the suitability of transmission electron microscopy (TEM) for advanced fertility diagnosis in stallion. We examined ejaculates of 46 stallions with known fertility. Animals were divided into three different groups: group 1, fertile stallions (pregnant mares> or =70%, n=29); group 2, subfertile stallions (pregnant mares 10-69%, n=14); group 3, infertile stallions (pregnant mares<10%, n=3). Ejaculates were collected in spring 2002. Conventional semen analysis (volume, sperm concentration, motility, live:dead ratio and percentage of morphologically normal sperm) was immediately performed after semen collection. Ultrastructural analysis included the evaluation of 200 acrosomes, heads, midpieces and cross-sections of tails as well as 100 longitudinal sections of tails from every ejaculate. Using LM, we found a significant increase of morphological deviations from 24.5% (x ) in group 1 to 34.5% in group 2 and 73.5% in group 3. Using TEM, we found a significant increase of detached acrosomes from 6.1% in group 1 to 7.6% in group 2 and 21.4% in group 3. Deviations in tubule pattern were also increased (but not significant) from 2.7% in fertile and 2.8% in subfertile to 11.4% in infertile stallions as well as multiple tails from 1.9% in fertile to 2.0% in subfertile and 8.9% in infertile. Our data indicate that TEM is suitable for advanced fertility diagnostic in stallions, giving a connection between fertility and morphology. It suggests that the most likely reason for sub- and infertility in stallion in case of increased LM pathomorphology of semen are acrosomal alterations, especially detached acrosomes.

  13. Transmission Electron Microscopy of Iron Metal in Almahata Sitta Ureilite

    NASA Technical Reports Server (NTRS)

    Mikouchi, T.; Yubuta, K.; Sugiyama, K.; Aoyagi, Y.; Yasuhara, A.; Mihira, T.; Zolensky, M. E.; Goodrich, C. A.

    2013-01-01

    Almahata Sitta (AS) is a polymict breccia mainly composed of variable ureilite lithologies with small amounts of chondritic lithologies [1]. Fe metal is a common accessory phase in ureilites, but our earlier study on Fe metals in one of AS fragments (#44) revealed a unique mineralogy never seen in other ureilites [2,3]. In this abstract we report detailed transmission electron microscopy (TEM) on these metal grains to better understand the thermal history of ureilites. We prepared FIB sections of AS#44 by JEOL JIB-4000 from the PTS that was well characterized by SEM-EBSD in our earlier study [2]. The sections were then observed by STEM (JEOL JEM- 2100F). One of the FIB sections shows a submicron-sized symplectic intergrown texture composed of Fe metal (kamacite), Fe carbide (cohenite), Fe phosphide (schreibersite), and Fe sulfide (troilite). Each phase has an identical SAED pattern in spite of its complex texture, suggesting co-crystallization of all phases. This is probably caused by shock re-melting of pre-existing metal + graphite to form a eutectic-looking texture. The other FIB section is mostly composed of homogeneous Fe metal (93 wt% Fe, 5 wt% Ni, and 2 wt% Si), but BF-STEM images exhibited the presence of elongated lathy grains (approx. 2 microns long) embedded in the interstitial matrix. The SAED patterns from these lath grains could be indexed by alpha-Fe (bcc) while interstitial areas are gamma-Fe (fcc). The elongated alpha-Fe grains show tweed-like structures suggesting martensite transformation. Such a texture can be formed by rapid cooling from high temperature where gamma-Fe was stable. Subsequently alpha-Fe crystallized, but gamma-Fe remained in the interstitial matrix due to quenching from high temperature. This scenario is consistent with very rapid cooling history of ureilites suggested by silicate mineralogy.

  14. Transmission electron microscopy investigation of auto catalyst and cobalt germanide

    NASA Astrophysics Data System (ADS)

    Sun, Haiping

    The modern ceria-zirconia based catalysts are used in automobiles to reduce exhaust pollutants. Cobalt germanides have potential applications as electrical contacts in the future Ge-based semiconductor devices. In this thesis, transmission electron microscopy (TEM) techniques were used to study the atomic scale interactions between metallic nanostructures and crystalline substrates in the two material systems mentioned above. The model catalyst samples consisted of precious metal nano-particles (Pd, Rh) supported on the surface of (Ce,Zr)O2 thin films. The response of the microstructure of the metal-oxide interface to the reduction and oxidation treatments was investigated by cross-sectional high resolution TEM. Atomic detail of the metal-oxide interface was obtained. It was found that Pd and Rh showed different sintering and interaction behaviors on the oxide surface. The preferred orientation of Pd particles in this study was Pd(111)//CZO(111). Partial encapsulation of Pd particles by reduced (Ce,Zr)O 2 surface was observed and possible mechanisms of the encapsulation were discussed. The characteristics of the metal-oxide interaction depend on the properties of the oxide, as well as their relative orientation. The results provide experimental evidence for understanding the thermodynamics of the equilibrium morphology of a solid particle supported on a solid surface that is not considered as inert. The reaction of Co with Ge to form epitaxial Co5Ge7 was studied by in situ ultra-high vacuum (UHV) TEM using two methods. One was reactive deposition of Co on Ge, in which the Ge substrate was maintained at 350°C during deposition. The other method was solid state reaction, in which the deposition of Co on Ge was carried out at room temperature followed by annealing to higher temperatures. During reactive deposition, the deposited Co reacted with Ge to form nanosized 3D Co 5Ge7 islands. During solid state reaction, a continuous epitaxial Co5Ge7 film on the (001) Ge

  15. Hybrid additive manufacturing of 3D electronic systems

    NASA Astrophysics Data System (ADS)

    Li, J.; Wasley, T.; Nguyen, T. T.; Ta, V. D.; Shephard, J. D.; Stringer, J.; Smith, P.; Esenturk, E.; Connaughton, C.; Kay, R.

    2016-10-01

    A novel hybrid additive manufacturing (AM) technology combining digital light projection (DLP) stereolithography (SL) with 3D micro-dispensing alongside conventional surface mount packaging is presented in this work. This technology overcomes the inherent limitations of individual AM processes and integrates seamlessly with conventional packaging processes to enable the deposition of multiple materials. This facilitates the creation of bespoke end-use products with complex 3D geometry and multi-layer embedded electronic systems. Through a combination of four-point probe measurement and non-contact focus variation microscopy, it was identified that there was no obvious adverse effect of DLP SL embedding process on the electrical conductivity of printed conductors. The resistivity maintained to be less than 4  ×  10-4 Ω · cm before and after DLP SL embedding when cured at 100 °C for 1 h. The mechanical strength of SL specimens with thick polymerized layers was also identified through tensile testing. It was found that the polymerization thickness should be minimised (less than 2 mm) to maximise the bonding strength. As a demonstrator a polymer pyramid with embedded triple-layer 555 LED blinking circuitry was successfully fabricated to prove the technical viability.

  16. In situ conversion of nanostructures from solid to hollow in transmission electron microscopes using electron beam.

    PubMed

    El Mel, Abdel-Aziz; Bittencourt, Carla

    2016-06-07

    With the current development of electron beam sources, the use of transmission electron microscopes is no more limited to imaging or chemical analysis but has rather been extended to nanoengineering. This includes the e-beam induced growth, etching and structural transformation of nanomaterials. In this review we summarize recent progress on the e-beam induced morphological transformation of nanostructures from solid to hollow. We provide a detailed account of the processes reported so far in the literature with a special emphasis on the mechanistic understanding of the e-beam induced hollowing of nanomaterials. Through an important number of examples, we discuss how one can achieve a precise control of such hollowing processes by understanding the fundamental mechanisms occurring at the atomic scale during the irradiation of solid nanostructures. Finally, we conclude with remarks and our own view on the prospective future directions of this research field.

  17. Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope.

    PubMed

    Wang, Peng; Behan, Gavin; Kirkland, Angus I; Nellist, Peter D; Cosgriff, Eireann C; D'Alfonso, Adrian J; Morgan, Andrew J; Allen, Leslie J; Hashimoto, Ayako; Takeguchi, Masaki; Mitsuishi, Kazutaka; Shimojo, Masayuki

    2011-06-01

    Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.

  18. Metal particles in a ceramic matrix--scanning electron microscopy and transmission electron microscopy characterization.

    PubMed

    Konopka, K

    2006-09-01

    This paper is concerned with ceramic matrix (Al(2)O(3)) composites with introduced metal particles (Ni, Fe). The composites were obtained via sintering of powders under very high pressure (2.5 GPa). Scanning electron microscopy and transmission electron microscopy were chosen as the tools for the identification and description of the shape, size and distribution of the metal particles. The Al(2)O(3)-Ni composite contained agglomerates of the Ni particles surrounded by ceramic grains and nanometre-size Ni particles located inside the ceramic grains and at the ceramic grain boundaries. In the Al(2)O(3)-Fe composite, the Fe particles were mostly surrounded by ceramic grains. Moreover, holes left by the Fe particles were found. The high pressure used in the fabrication of the composites changed the shape of the metal and ceramic powder grains via plastic deformation.

  19. Investigating the use of in situ liquid cell scanning transmission electron microscopy

    SciTech Connect

    Nguy, Amanda

    2016-02-19

    Engineering nanoparticles with desired shape-dependent properties is the key to many applications in nanotechnology. Although many synthetic procedures exist to produce anisotropic gold nanoparticles, the dynamics of growth are typically unknown or hypothetical. In the case of seed-mediated growth in the presence of DNA into anisotropic nanoparticles, it is not known exactly how DNA directs growth into specific morphologies. A series of preliminary experiments were carried out to contribute to the investigation of the possible mechanism of DNA-mediated growth of gold nanoprisms into gold nanostars using liquid cell scanning transmission electron microscopy (STEM). Imaging in the liquid phase was achieved through the use of a liquid cell platform and liquid cell holder that allow the sample to be contained within a “chip sandwich” between two electron transparent windows. Ex situ growth experiments were performed using Au-T30 NPrisms (30-base thymine oligonucleotide-coated gold nanoprisms) that are expected to grow into gold nanostars. Growth to form these nanostars were imaged using TEM (transmission electron microscopy) and liquid cell STEM (scanning transmission electron microscopy). An attempt to perform in situ growth experiments with the same Au-T30 nanoprisms revealed challenges in obtaining desired morphology results due to the environmental differences within the liquid cell compared to the ex situ environment. Different parameters in the experimental method were explored including fluid line set up, simultaneous and alternating reagent addition, and the effect of different liquid cell volumes to ensure adequate flow of reagents into the liquid cell. Lastly, the binding affinities were compared for T30 and A30 DNA incubated with gold nanoparticles using zeta potential measurements, absorption spectroscopy, and isothermal titration calorimetry (ITC). It was previously reported thymine bases have a lower binding affinity to gold surfaces than adenine

  20. Harmonic Resonance in Power Transmission Systems due to the Addition of Shunt Capacitors

    NASA Astrophysics Data System (ADS)

    Patil, Hardik U.

    Shunt capacitors are often added in transmission networks at suitable locations to improve the voltage profile. In this thesis, the transmission system in Arizona is considered as a test bed. Many shunt capacitors already exist in the Arizona transmission system and more are planned to be added. Addition of these shunt capacitors may create resonance conditions in response to harmonic voltages and currents. Such resonance, if it occurs, may create problematic issues in the system. It is main objective of this thesis to identify potential problematic effects that could occur after placing new shunt capacitors at selected buses in the Arizona network. Part of the objective is to create a systematic plan for avoidance of resonance issues. For this study, a method of capacitance scan is proposed. The bus admittance matrix is used as a model of the networked transmission system. The calculations on the admittance matrix were done using Matlab. The test bed is the actual transmission system in Arizona; however, for proprietary reasons, bus names are masked in the thesis copy intended for the public domain. The admittance matrix was obtained from data using the PowerWorld Simulator after equivalencing the 2016 summer peak load (planning case). The full Western Electricity Coordinating Council (WECC) system data were used. The equivalencing procedure retains only the Arizona portion of the WECC. The capacitor scan results for single capacitor placement and multiple capacitor placement cases are presented. Problematic cases are identified in the form of 'forbidden response. The harmonic voltage impact of known sources of harmonics, mainly large scale HVDC sources, is also presented. Specific key results for the study indicated include: (1) The forbidden zones obtained as per the IEEE 519 standard indicates the bus 10 to be the most problematic bus. (2) The forbidden zones also indicate that switching values for the switched shunt capacitor (if used) at bus 3 should be

  1. In situ electronic characterization of graphene nanoconstrictions fabricated in a transmission electron microscope.

    PubMed

    Lu, Ye; Merchant, Christopher A; Drndić, Marija; Johnson, A T Charlie

    2011-12-14

    We report electronic measurements on high-quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths in the range 1-700 nm; after each sculpting step, the sample was imaged by TEM and its electronic properties were measured in situ. GNC conductance was found to be remarkably high, comparable to that of exfoliated graphene samples of similar size. The GNC conductance varied with width approximately as G(w)=(e2/h)w0.75, where w is the constriction width in nanometers. GNCs support current densities greater than 120 μA/nm2, 2 orders of magnitude higher than that which has been previously reported for graphene nanoribbons and 2000 times higher than that reported for copper.

  2. In Situ Electronic Characterization of Graphene Nanoconstrictions Fabricated in a Transmission Electron Microscope

    NASA Astrophysics Data System (ADS)

    Lu, Ye; Merchant, Christopher; Drndic, Marija; Johnson, A. T. Charlie

    2012-02-01

    We report electronic measurements on high quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths in the range 1-700 nm; after each sculpting step, the sample was imaged by TEM and its electronic properties were measured in situ. GNC conductance was found to be remarkably high, comparable to that of exfoliated graphene samples of similar size. The GNC conductance varied with width approximately as G(w) = (e^2/h)w^0.75, where w is the constriction width in nanometers. GNCs support current densities greater than 120 μA/nm^2, 2 orders of magnitude higher than that which has been previously reported for graphene nanoribbons and 2000 times higher than that reported for copper.

  3. Balamuthia mandrillaris: Further morphological observations of trophozoites by light, scanning and transmission electron microscopy.

    PubMed

    González-Robles, Arturo; Lares-Villa, Fernando; Lares-Jiménez, Luis Fernando; Omaña-Molina, Maritza; Salazar-Villatoro, Lizbeth; Martínez-Palomo, Adolfo

    2015-10-01

    Additional morphological features of Balamuthia mandrillaris observed by light and electron microscopy are reported. Trophozoites were extremely pleomorphic: their cell shapes ranged from rounded to elongated and sometimes they appeared exceptionally stretched out and branched. By transmission electron microscopy it was possible to observe two different cytoplasmic areas, the ectoplasm and the endoplasm and often sections of rough endoplasmic reticulum were found in the transition zone. The cytoplasm was very fibrogranular and most of the organelles typically found in eukaryotic cells were observed. A particular finding was the presence of numerous mitochondria with a different structure from those of other free-living amoebae. The observations reported here may reinforce the morphological knowledge of this amoeba and provide a background for further analyses.

  4. Identification of light elements in silicon nitride by aberration-corrected scanning transmission electron microscopy.

    PubMed

    Idrobo, Juan C; Walkosz, Weronika; Klie, Robert F; Oğüt, Serdar

    2012-12-01

    In silicon nitride structural ceramics, the overall mechanical and thermal properties are controlled by the atomic and electronic structures at the interface between the ceramic grains and the amorphous intergranular films (IGFs) formed by various sintering additives. In the last ten years the atomic arrangements of heavy elements (rare-earths) at the Si(3)N(4)/IGF interfaces have been resolved. However, the atomic position of light elements, without which it is not possible to obtain a complete description of the interfaces, has been lacking. This review article details the authors' efforts to identify the atomic arrangement of light elements such as nitrogen and oxygen at the Si(3)N(4)/SiO(2) interface and in bulk Si(3)N(4) using aberration-corrected scanning transmission electron microscopy.

  5. Photoionization in micelles: Addition of charged electron acceptors

    NASA Astrophysics Data System (ADS)

    Stenland, Chris; Kevan, Larry

    The relative photoyield of the electron donor N, N, N', N'-tetramethylbenzidine (TMB), solubilized in sodium and lithium dodecyl sulfate micelles with added charged electron acceptors was investigated. It was attempted to control the acceptor distance from a charged micellar interface by differently charged acceptors, cationic dimethyl viologen and anionic ferricyanide. However, back electron transfer from both cationic and anionic acceptors was found to be efficient. Thus simple electrostatic arguments for control of the photoyield do not seem applicable. Salt effects associated with the added ionic acceptors which partially neutralize the ionic micellar interface are suggested to be an important factor.

  6. Resolution enhancement in transmission electron microscopy with 60-kV monochromated electron source

    SciTech Connect

    Morishita, Shigeyuki; Mukai, Masaki; Sawada, Hidetaka; Suenaga, Kazutomo

    2016-01-04

    Transmission electron microscopy (TEM) at low accelerating voltages is useful to obtain images with low irradiation damage. For a low accelerating voltage, linear information transfer, which determines the resolution for observation of single-layered materials, is largely limited by defocus spread, which improves when a narrow energy spread is used in the electron source. In this study, we have evaluated the resolution of images obtained at 60 kV by TEM performed with a monochromated electron source. The defocus spread has been evaluated by comparing diffractogram tableaux from TEM images obtained under nonmonochromated and monochromated illumination. The information limits for different energy spreads were precisely measured by using diffractograms with a large beam tilt. The result shows that the information limit reaches 0.1 nm with an energy width of 0.10 eV. With this monochromated source and a higher-order aberration corrector, we have obtained images of single carbon atoms in a graphene sheet by TEM at 60 kV.

  7. Atomic imaging using secondary electrons in a scanning transmission electron microscope: experimental observations and possible mechanisms.

    PubMed

    Inada, H; Su, D; Egerton, R F; Konno, M; Wu, L; Ciston, J; Wall, J; Zhu, Y

    2011-06-01

    We report detailed investigation of high-resolution imaging using secondary electrons (SE) with a sub-nanometer probe in an aberration-corrected transmission electron microscope, Hitachi HD2700C. This instrument also allows us to acquire the corresponding annular dark-field (ADF) images both simultaneously and separately. We demonstrate that atomic SE imaging is achievable for a wide range of elements, from uranium to carbon. Using the ADF images as a reference, we studied the SE image intensity and contrast as functions of applied bias, atomic number, crystal tilt, and thickness to shed light on the origin of the unexpected ultrahigh resolution in SE imaging. We have also demonstrated that the SE signal is sensitive to the terminating species at a crystal surface. A possible mechanism for atomic-scale SE imaging is proposed. The ability to image both the surface and bulk of a sample at atomic-scale is unprecedented, and can have important applications in the field of electron microscopy and materials characterization.

  8. Practical spatial resolution of electron energy loss spectroscopy in aberration corrected scanning transmission electron microscopy.

    PubMed

    Shah, A B; Ramasse, Q M; Wen, J G; Bhattacharya, A; Zuo, J M

    2011-08-01

    The resolution of electron energy loss spectroscopy (EELS) is limited by delocalization of inelastic electron scattering rather than probe size in an aberration corrected scanning transmission electron microscope (STEM). In this study, we present an experimental quantification of EELS spatial resolution using chemically modulated 2×(LaMnO(3))/2×(SrTiO(3)) and 2×(SrVO(3))/2×(SrTiO(3)) superlattices by measuring the full width at half maxima (FWHM) of integrated Ti M(2,3), Ti L(2,3), V L(2,3), Mn L(2,3), La N(4,5), La N(2,3) La M(4,5) and Sr L(3) edges over the superlattices. The EELS signals recorded using large collection angles are peaked at atomic columns. The FWHM of the EELS profile, obtained by curve-fitting, reveals a systematic trend with the energy loss for the Ti, V, and Mn edges. However, the experimental FWHM of the Sr and La edges deviates significantly from the observed experimental tendency.

  9. Strain measurement in semiconductor heterostructures by scanning transmission electron microscopy.

    PubMed

    Müller, Knut; Rosenauer, Andreas; Schowalter, Marco; Zweck, Josef; Fritz, Rafael; Volz, Kerstin

    2012-10-01

    This article deals with the measurement of strain in semiconductor heterostructures from convergent beam electron diffraction patterns. In particular, three different algorithms in the field of (circular) pattern recognition are presented that are able to detect diffracted disc positions accurately, from which the strain in growth direction is calculated. Although the three approaches are very different as one is based on edge detection, one on rotational averages, and one on cross correlation with masks, it is found that identical strain profiles result for an In x Ga1-x N y As1-y /GaAs heterostructure consisting of five compressively and tensile strained layers. We achieve a precision of strain measurements of 7-9·10-4 and a spatial resolution of 0.5-0.7 nm over the whole width of the layer stack which was 350 nm. Being already very applicable to strain measurements in contemporary nanostructures, we additionally suggest future hardware and software designs optimized for fast and direct acquisition of strain distributions, motivated by the present studies.

  10. Scanning and Transmission Electron Microscopy of High Temperature Materials

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Software and hardware updates to further extend the capability of the electron microscope were carried out. A range of materials such as intermetallics, metal-matrix composites, ceramic-matrix composites, ceramics and intermetallic compounds, based on refractory elements were examined under this research. Crystal structure, size, shape and volume fraction distribution of various phases which constitute the microstructures were examined. Deformed materials were studied to understand the effect of interfacial microstructure on the deformation and fracture behavior of these materials. Specimens tested for a range of mechanical property requirements, such as stress rupture, creep, low cycle fatigue, high cycle fatigue, thermomechanical fatigue, etc. were examined. Microstructural and microchemical stability of these materials exposed to simulated operating environments were investigated. The EOIM Shuttle post-flight samples were also examined to understand the influence of low gravity processing on microstructure. In addition, fractographic analyses of Nb-Zr-W, titanium aluminide, molybdenum silicide and silicon carbide samples were carried out. Extensive characterization of sapphire fibers in the fiber-reinforced composites made by powder cloth processing was made. Finally, pressure infiltration casting of metal-matrix composites was carried out.

  11. Observation of a vacuum tunnel gap in a transmission electron microscope using a micromechanical tunneling microscope

    NASA Astrophysics Data System (ADS)

    Lutwyche, M. I.; Wada, Y.

    1995-05-01

    This letter reports the observation of the vacuum tunnel gap between two conductors using a high resolution transmission electron microscope. A 2.5 mm square micromachined tunneling microscope chip has been fabricated with a minimum feature size of 0.4 μm. The chip fits into a modified side-entry type transmission electron microscope holder. The tunnel gap is controlled by a purpose-built feedback controller. The micromachines work reliably during observation of the tip apex in a transmission electron microscope, allowing the voltage and current to be changed while the tunnel gap is observed.

  12. Electron diffraction from free-standing, metal-coated transmission gratings

    NASA Astrophysics Data System (ADS)

    Gronniger, Glen; Barwick, Brett; Batelaan, Herman; Savas, Tim; Pritchard, Dave; Cronin, Alex

    2005-09-01

    Electron diffraction from a free-standing nanofabricated transmission grating was demonstrated, with energies ranging from 125 eV to 25 keV. Observation of 21 diffraction orders highlights the quality of the gratings. The image charge potential due to one electron was measured by rotating the grating. These gratings may pave the way to low-energy electron interferometry.

  13. Effect of microscope parameter and specimen thickness of spatial resolution of transmission electron backscatter diffraction.

    PubMed

    Wang, Y Z; Kong, M G; Liu, Z W; Lin, C C; Zeng, Y

    2016-10-01

    The spatial resolution of transmission electron backscatter diffraction (t-EBSD) with a standard conventional EBSD detector was evaluated quantitatively based on the calculation of the correlation coefficient of transmission patterns which were acquired across a twin boundary in the sample of austenitic steel. The results showed that the resolution of t-EBSD improved from tens of nanometres to below 10 nm with increasing accelerating voltage and thinning of specimen thickness. High voltage could enhance the penetration depth and reduce the scattering angle. And the thinning of specimen thickness would result in decreasing of the scattering events according to the theory of thermal diffuse scattering (TDS). In addition, the transmission patterns were found to be weak and noisy if the specimen was too thin, because of the decreasing intensity detected by the screen. Consequently, in this work, the best spatial resolution of 7 nm was achieved at 30 kV and 41 nm thickness. Moreover, the specimen thickness range was also discussed using Monte-Carlo simulation. This approach was helpful to account for the differences of measured spatial resolutions, by t-EBSD, of lamellas with different thickness.

  14. Electronic transmission and switch effect in kappa-component Fibonacci nanowires.

    PubMed

    Li, Jia; Zhang, Ruili; Li, De; Peng, Ruwen; Wang, Mu

    2010-11-01

    We present the electronic transport in the k-component Fibonacci (KCF) nanowires, in which kappa different incommensurate intervals are arranged according to a substitution rule. For the KCF nanowires with an identical kappa, by increasing the length of the nanowire, the minima in transmission extend gradually into the band gap over which the transmission is blocked. Meanwhile more transmission peaks appear. For finite KCF nanowire, by increasing the number of different incommensurate intervals kappa, the width of electronic band gap is enlarged. Moreover, when the value of kappa is sufficiently large, the transmission is shut off, except at a few resonant energies. These properties make it possible to use the KCF nanowires as switching devices. Furthermore, a dimensional spectrum of singularities associated with the transmission spectrum demonstrates that the electronic propagation in the KCF nanowire shows multifractality. These investigations open a unique way to control quantum transport in nanodevices.

  15. A Scanning Transmission Electron Microscopy (STEM) Approach to Analyzing Large Volumes of Tissue to Detect Nanoparticles

    PubMed Central

    Kempen, Paul J.; Thakor, Avnesh S.; Zavaleta, Cristina; Gambhir, Sanjiv S.; Sinclair, Robert

    2013-01-01

    The use of nanoparticles for the diagnosis and treatment of cancer requires the complete characterization of their toxicity, including accurately locating them within biological tissues. Owing to their size, traditional light microscopy techniques are unable to resolve them. Transmission electron microscopy provides the necessary spatial resolution to image individual nanoparticles in tissue but is severely limited by the very small analysis volume, usually on the order of tens of cubic microns. In this work we developed a scanning transmission electron microscopy (STEM) approach to analyze large volumes of tissue for the presence of polyethylene glycol coated Raman-active-silica-gold-nanoparticles (PEG-R-Si-Au-NPs). This approach utilizes the simultaneous bright and dark field imaging capabilities of STEM along with careful control of the image contrast settings to readily identify PEG-R-Si-Au-NPs in mouse liver tissue without the need for additional time consuming analytical characterization. We utilized this technique to analyze 243,000 µm3 of mouse liver tissue for the presence of PEG-R-Si-Au-NPs. Nanoparticles injected into the mice intravenously via the tail-vein accumulated in the liver while those injected intrarectally did not, indicating that they remain in the colon and do not pass through the colon wall into the systemic circulation. PMID:23803218

  16. Prospecting nanomaterials in aqueous environments by cloud-point extraction coupled with transmission electron microscopy.

    PubMed

    Yang, Yu; Reed, Robert; Schoepf, Jared; Hristovski, Kiril; Herckes, Pierre; Westerhoff, Paul

    2017-04-15

    Increasing application of engineered nanomaterials (ENMs) in industry and consumer products inevitably lead to their release into and impact on aquatic environments. To characterize the NMs efficiently in surface water, a fast and simple method is needed to separate and concentrate nanomaterials from the aqueous matrix without altering their shape and size. Applying cloud-point extraction (CPE) using the surfactant Triton 114 to an array of NMs (titanium dioxide, gold, silver, and silicon dioxide) with different sizes or capping agents in nanopure water resulted in extraction efficiency of 83%-107%. Additional CPE experiments were conducted to extract NMs from surface, potable, and sewage waters, and NMs enriched in the surfactant phase were characterized using transmission electron microscopy coupled with energy dispersive x-ray spectroscopy. The most abundant nanoparticles identified in surface water were silica, titanium dioxide, and iron oxide with 4-99nm diameter. The extraction efficiencies of CPE for silicon, titanium, and iron elements from environmental water samples were 51%, 15%, and 99%, respectively. This study applied CPE with TEM to enrich and analyze popular nanoparticles such as SiO2 and TiO2 from natural waters, which has not been well addressed by previous researches. Overall, CPE coupled with transmission electron microscopy (TEM) can be an effective method to characterize NMs in aqueous water samples, and further optimization will increase the extraction efficiency of NMs in complicated surface water matrix.

  17. A scanning transmission electron microscopy approach to analyzing large volumes of tissue to detect nanoparticles.

    PubMed

    Kempen, Paul J; Thakor, Avnesh S; Zavaleta, Cristina; Gambhir, Sanjiv S; Sinclair, Robert

    2013-10-01

    The use of nanoparticles for the diagnosis and treatment of cancer requires the complete characterization of their toxicity, including accurately locating them within biological tissues. Owing to their size, traditional light microscopy techniques are unable to resolve them. Transmission electron microscopy provides the necessary spatial resolution to image individual nanoparticles in tissue, but is severely limited by the very small analysis volume, usually on the order of tens of cubic microns. In this work, we developed a scanning transmission electron microscopy (STEM) approach to analyze large volumes of tissue for the presence of polyethylene glycol-coated Raman-active-silica-gold-nanoparticles (PEG-R-Si-Au-NPs). This approach utilizes the simultaneous bright and dark field imaging capabilities of STEM along with careful control of the image contrast settings to readily identify PEG-R-Si-Au-NPs in mouse liver tissue without the need for additional time-consuming analytical characterization. We utilized this technique to analyze 243,000 mm³ of mouse liver tissue for the presence of PEG-R-Si-Au-NPs. Nanoparticles injected into the mice intravenously via the tail vein accumulated in the liver, whereas those injected intrarectally did not, indicating that they remain in the colon and do not pass through the colon wall into the systemic circulation.

  18. Xenon Implantation in Nanodiamonds: In Situ Transmission Electron Microscopy Study and Molecular Dynamics Simulations

    NASA Astrophysics Data System (ADS)

    Shiryaev, A. A.; Hinks, J.; Marks, N.; Greaves, G.; Donnelly, S.; Fisenko, A. V.; Kiwi, M.

    2016-08-01

    We present results of the first investigation of the Xe implantation process into nanodiamonds of various sizes studied in situ in transmission electron microscope (TEM), complemented by advanced molecular dynamics simulations.

  19. 45 CFR Appendix C to Part 1355 - Electronic Data Transmission Format

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION ON CHILDREN, YOUTH AND FAMILIES, FOSTER CARE MAINTENANCE PAYMENTS, ADOPTION ASSISTANCE, AND CHILD AND FAMILY SERVICES GENERAL Pt... for Children and Families (ACF). Regardless of the electronic data transmission methodology...

  20. 7 CFR 400.209 - Electronic transmission and receiving system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... store actuarial data electronically via telecommunications utilizing 3780 protocol and utilizing a BELL... the data elements in the Summary of Protection; (5) Transmit crop insurance data electronically, via... acknowledgements, error messages, and other data via 3780 protocol utilizing a BELL 208B or compatible modem...

  1. Coupling Automated Electron Backscatter Diffraction with Transmission Electron and Atomic Force Microscopies

    SciTech Connect

    Schwartz, A.J.; Kumar, M.; Bedrossian, P.J.; King, W.E.

    2000-01-26

    Grain boundary network engineering is an emerging field that encompasses the concept that modifications to conventional thermomechanical processing can result in improved properties through the disruption of the random grain boundary network. Various researchers have reported a correlation between the grain boundary character distribution (defined as the fractions of special and random grain boundaries) and dramatic improvements in properties such as corrosion and stress corrosion cracking, creep, etc. While much early work in the field emphasized property improvements, the opportunity now exists to elucidate the underlying materials science of grain boundary network engineering. Recent investigations at LLNL have coupled automated electron backscatter diffraction (EBSD) with transmission electron microscopy (TEM) and atomic force microscopy (AFM) to elucidate these fundamental mechanisms. This investigation provides evidence that grain boundary network engineering and the formation of annealing twins disrupt the connectivity of the random grain boundary network and is likely responsible for the experimentally observed improvement in properties. This work illustrates that coupling of automated EBSD with other microstructural probes such as TEM and AFM provides data of greater value than any single technique in isolation. The coupled techniques have been applied to aid in understanding the underlying mechanisms of grain boundary network engineering and the corrosion properties of individual boundaries.

  2. Electron tomography of HEK293T cells using scanning electron microscope-based scanning transmission electron microscopy.

    PubMed

    You, Yun-Wen; Chang, Hsun-Yun; Liao, Hua-Yang; Kao, Wei-Lun; Yen, Guo-Ji; Chang, Chi-Jen; Tsai, Meng-Hung; Shyue, Jing-Jong

    2012-10-01

    Based on a scanning electron microscope operated at 30 kV with a homemade specimen holder and a multiangle solid-state detector behind the sample, low-kV scanning transmission electron microscopy (STEM) is presented with subsequent electron tomography for three-dimensional (3D) volume structure. Because of the low acceleration voltage, the stronger electron-atom scattering leads to a stronger contrast in the resulting image than standard TEM, especially for light elements. Furthermore, the low-kV STEM yields less radiation damage to the specimen, hence the structure can be preserved. In this work, two-dimensional STEM images of a 1-μm-thick cell section with projection angles between ±50° were collected, and the 3D volume structure was reconstructed using the simultaneous iterative reconstructive technique algorithm with the TomoJ plugin for ImageJ, which are both public domain software. Furthermore, the cross-sectional structure was obtained with the Volume Viewer plugin in ImageJ. Although the tilting angle is constrained and limits the resulting structural resolution, slicing the reconstructed volume generated the depth profile of the thick specimen with sufficient resolution to examine cellular uptake of Au nanoparticles, and the final position of these nanoparticles inside the cell was imaged.

  3. Measurements of the UV and VUV transmission of optical materials during high energy electron irradiation

    NASA Technical Reports Server (NTRS)

    Palma, G. E.

    1972-01-01

    An experimental program was conducted in which the optical transmission of several transparent materials was measured during high energy electron irradiation. These experiments were conducted using the Dynamitron electron accelerator as a continuous source of 1.5 MeV electrons and the LINAC electron accelerator as a pulsed source of 5-7 MeV electrons. The experimental program consisted of three major portions. The first portion, the optical transmission of fused silica, BeO, MgF2, and LiF was measured at vacuum ultraviolet wavelengths in the range 1550-2000 A during ambient temperature, 1.5 MeV electron irradiation at ionizing dose rates to 0.5 Mrad/sec. In the second portion of the program, the optical transmission of fused silica and BeO was measured in the range 2000-3000 A during high dose rate, elevated temperature 1.5 MeV electron irradiation. In particular, accurate measurements of the optical transmission were made at ionizing dose rates as high as 10 Mrad/sec. In the final portion of the program, the optical transmission of fused silica and BeO was measured in the wavelength range 2000-3000 A during pulsed 5 and 7 MeV electron irradiation from the LINAC accelerator. The maximum time averaged ionizing dose rate was limited to 0.75 Mrad/sec due to accelerator limitations.

  4. Deciphering the physics and chemistry of perovskites with transmission electron microscopy.

    PubMed

    Polking, Mark J

    2016-03-28

    Perovskite oxides exhibit rich structural complexity and a broad range of functional properties, including ferroelectricity, ferromagnetism, and superconductivity. The development of aberration correction for the transmission electron microscope and concurrent progress in electron spectroscopy, electron holography, and other techniques has fueled rapid progress in the understanding of the physics and chemistry of these materials. New techniques based on the transmission electron microscope are first surveyed, and the applications of these techniques for the study of the structure, chemistry, electrostatics, and dynamics of perovskite oxides are then explored in detail, with a particular focus on ferroelectric materials.

  5. Deciphering the physics and chemistry of perovskites with transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Polking, Mark J.

    2016-03-01

    Perovskite oxides exhibit rich structural complexity and a broad range of functional properties, including ferroelectricity, ferromagnetism, and superconductivity. The development of aberration correction for the transmission electron microscope and concurrent progress in electron spectroscopy, electron holography, and other techniques has fueled rapid progress in the understanding of the physics and chemistry of these materials. New techniques based on the transmission electron microscope are first surveyed, and the applications of these techniques for the study of the structure, chemistry, electrostatics, and dynamics of perovskite oxides are then explored in detail, with a particular focus on ferroelectric materials.

  6. Electronic Master Monitor and Advisory Display System, Data Transmission Study.

    DTIC Science & Technology

    1980-08-01

    Master Monitor and Advisory Display system (EMMADS). By contrac- tual requirement the EMMADS demonstration hardware will use a dual redundant MIL- STD -1553B...data multiplexing bus, the minimum requirement for EMMADS data transmission rate is 74.2 Kilobits per second. The MIL- STD -1553 Bus is specified to...as the French military standard, the counterpart of US MIL- STD -1553. DSDBS is developed for the sole purpose of minimizing the hardware with

  7. Characterization of an HY-130 Steel Weldment by Transmission Electron Microscopy.

    DTIC Science & Technology

    1981-12-01

    A0A1IA 451 NAVAL POSTGRADUATE SCHOOL MONTEREY CA F/6 11/6 cHARACTERZXATION O AN NY-130 STEEL WELOMENT BY TRANSMISSION EL--ETC(U) UNLA D DEC 81 W N...17 19.8 THESIS S CHARACTERIZATION OF AN HY-130 STEEL WELDMENT BY TRANSMISSION ELECTRON MICROSCOPY by Wallace Michael Elger December 1981 0-. Thesis...REPORT & PERIOD COVERED Characterization of an HY-130 Steel Master’s Thesis; Weidment by Transmission Electron December 1981 Microscopy 6. PERFORMING

  8. Characterization of polysilicon films by Raman spectroscopy and transmission electron microscopy: A comparative study

    SciTech Connect

    Tallant, D.R.; Headley, T.J.; Medernach, J.W.; Geyling, F.

    1993-11-12

    Samples of chemically-vapor-deposited micrometer and sub-micrometer-thick films of polysilicon were analyzed by transmission electron microscopy (TEM) in cross-section and by Raman spectroscopy with illumination at their surface. TEM and Raman spectroscopy both find varying amounts of polycrystalline and amorphous silicon in the wafers. Raman spectra obtained using blue, green and red excitation wavelengths to vary the Raman sampling depth are compared with TEM cross-sections of these films. Films showing crystalline columnar structures in their TEM micrographs have Raman spectra with a band near 497 cm{sup {minus}1} in addition to the dominant polycrystalline silicon band (521 cm{sup {minus}1}). The TEM micrographs of these films have numerous faulted regions and fringes indicative of nanometer-scale silicon structures, which are believed to correspond to the 497cm{sup {minus}1} Raman band.

  9. Picoliter Drop-On-Demand Dispensing for Multiplex Liquid Cell Transmission Electron Microscopy

    PubMed Central

    Patterson, Joseph P.; Parent, Lucas R.; Cantlon, Joshua; Eickhoff, Holger; Bared, Guido; Evans, James E.; Gianneschi, Nathan C.

    2017-01-01

    Liquid cell transmission electron microscopy (LCTEM) provides a unique insight into the dynamics of nanomaterials in solution. Controlling the addition of multiple solutions to the liquid cell remains a key hurdle in our ability to increase throughput and to study processes dependent on solution mixing including chemical reactions. Here, we report that a piezo dispensing technique allows for mixing of multiple solutions directly within the viewing area. This technique permits deposition of 50 pL droplets of various aqueous solutions onto the liquid cell window, before assembly of the cell in a fully controlled manner. This proof-of-concept study highlights the great potential of picoliter dispensing in combination with LCTEM for observing nanoparticle mixing in the solution phase and the creation of chemical gradients. PMID:27135268

  10. Picoliter Drop-On-Demand Dispensing for Multiplex Liquid Cell Transmission Electron Microscopy

    SciTech Connect

    Patterson, Joseph P.; Parent, Lucas R.; Cantlon, Joshua; Eickhoff, Holger; Bared, Guido; Evans, James E.; Gianneschi, Nathan C.

    2016-05-03

    Abstract

    Liquid cell transmission electron microscopy (LCTEM) provides a unique insight into the dynamics of nanomaterials in solution. Controlling the addition of multiple solutions to the liquid cell remains a key hurdle in our ability to increase throughput and to study processes dependent on solution mixing including chemical reactions. Here, we report that a piezo dispensing technique allows for mixing of multiple solutions directly within the viewing area. This technique permits deposition of 50 pL droplets of various aqueous solutions onto the liquid cell window, before assembly of the cell in a fully controlled manner. This proof-of-concept study highlights the great potential of picoliter dispensing in combination with LCTEM for observing nanoparticle mixing in the solution phase and the creation of chemical gradients.

  11. Cryogenic transmission electron microscopy study: preparation of vesicular dispersions by quenching microemulsions.

    PubMed

    Lee, H S; Morrison, E D; Zhang, Q; McCormick, A V

    2016-09-01

    We previously showed that long-lived nanoemulsions, seeming initially vesicular, might be prepared simply by diluting and cooling (quenching) warm microemulsions with n-hexadecane with precooled water. In this paper, we confirm that these systems are vesicular dispersions when fresh, and they can be made with similar structures and compositional dependence using alkanes with chain lengths ranging from octane to hexadecane. The nanostructures of fresh nanoemulsions are imaged with cryogenic transmission electron microscopy (cryo-TEM). We confirm that water-continuous microemulsions give simple dispersions of vesicles (sometimes unilamellar), typically less than 100 nm in diameter; these systems can avoid separation for over 2 months. Selected samples were also prepared using halogenated alkanes to create additional contrast in the cryo-TEM, allowing us to confirm that the oil is located in the observed vesicular structures.

  12. Transmission electron microscopy of thin sections of Drosophila: conventional chemical fixation of embryos using trialdehyde.

    PubMed

    McDonald, Kent L; Sharp, David J; Rickoll, Wayne

    2012-04-01

    High-pressure freezing (HPF) followed by freeze-substitution is a valuable method for specimen preservation for transmission electron microscopy (TEM) in Drosophila. However, not all projects require this level of precision. In addition, some tissues are too large to fit into the HPF specimen carriers, and some fly tissues such as eyes and ovaries do not freeze well. This protocol describes a trialdehyde fixation procedure for embryos, to be used in situations where optimal preservation is not required or when HPF is not an option. Because the vitelline membrane is impermeable to aqueous solvents, it is necessary to either mechanically disrupt it or render it permeable by treatment with organic solvents. Good ultrastructural preservation has been achieved by puncturing embryos immersed in fixative with extremely sharp tungsten needles, as described here.

  13. Matched Backprojection Operator for Combined Scanning Transmission Electron Microscopy Tilt- and Focal Series.

    PubMed

    Dahmen, Tim; Kohr, Holger; de Jonge, Niels; Slusallek, Philipp

    2015-06-01

    Combined tilt- and focal series scanning transmission electron microscopy is a recently developed method to obtain nanoscale three-dimensional (3D) information of thin specimens. In this study, we formulate the forward projection in this acquisition scheme as a linear operator and prove that it is a generalization of the Ray transform for parallel illumination. We analytically derive the corresponding backprojection operator as the adjoint of the forward projection. We further demonstrate that the matched backprojection operator drastically improves the convergence rate of iterative 3D reconstruction compared to the case where a backprojection based on heuristic weighting is used. In addition, we show that the 3D reconstruction is of better quality.

  14. Revealing the anomalous tensile properties of WS2 nanotubes by in situ transmission electron microscopy.

    PubMed

    Tang, Dai-Ming; Wei, Xianlong; Wang, Ming-Sheng; Kawamoto, Naoyuki; Bando, Yoshio; Zhi, Chunyi; Mitome, Masanori; Zak, Alla; Tenne, Reshef; Golberg, Dmitri

    2013-03-13

    Mechanical properties and fracture behaviors of multiwalled WS2 nanotubes produced by large scale fluidized bed method were investigated under uniaxial tension using in situ transmission electron microscopy probing; these were directly correlated to the nanotube atomic structures. The tubes with the average outer diameter ∼40 nm sustained tensile force of ∼2949 nN and revealed fracture strength of ∼11.8 GPa. Surprisingly, these rather thick WS2 nanotubes could bear much higher loadings than the thin WS2 nanotubes with almost "defect-free" structures studied previously. In addition, the fracture strength of the "thick" nanotubes did not show common size dependent degradation when the tube diameters increased from ∼20 to ∼60 nm. HRTEM characterizations and real time observations revealed that the anomalous tensile properties are related to the intershell cross-linking and geometric constraints from the inverted cone-shaped tube cap structures, which resulted in the multishell loading and fracturing.

  15. Biological Applications and Transmission Electron Microscopy Investigations of Mesoporous Silica Nanoparticles

    SciTech Connect

    Trewyn, Brian G.

    2006-01-01

    antioxidant dependent release was measured. Finally, the biological interaction of the material was determined along with TEM measurements. An electron investigation proved that the pore openings of the MSN were indeed blocked by the Fe3O4 nanoparticles. The biological interaction investigation demonstrated Fe3O4-capped MSN endocytosis into HeLa cells. Not only does the material enter the cells through endocytosis, but it seems that fluorescein was released from the pores most probably caused by disulfide bond reducing molecules, antioxidants. In addition to endocytosis and release, the Fe3O4-capped MSN propelled the cells across a cuvette upon induction of a magnet force. Finally, an important aspect of materials characterization is transmission electron microscopy. A TEM investigation demonstrated that incorporating different functional groups during the synthesis (co-condensation) changed the particle and pore morphologies.

  16. Interpreting electron transmission spectroscopy and negative ion mass spectrometry data using a spherical potential well model

    SciTech Connect

    Asfandiarov, N. L. Nafikova, E. P.; Pshenichnyuk, S. A.

    2007-03-15

    Experimental data obtained using electron transmission spectroscopy and negative ion mass spectrometry based on resonance electron capture are interpreted within the framework of a spherical potential well model in application to a series of chloro-and bromoalkane molecules. Allowance for the scattering of a single partial p-wave of the incoming electron makes possible (i) reproduction of the ratio of a resonance peak width to the electron energy observed in the electron transmission spectra and (ii) establishment of a relation between the total cross section of electron scattering on a molecule and the dissociative electron attachment cross section. The proposed model offers a radical simplification of the approach developed previously based on the Fashbach-Fano resonance theory.

  17. Exorcising Ghost Transmission from Electron Transport Calculations: Refighting Old Battles in New Contexts

    NASA Astrophysics Data System (ADS)

    Reuter, Matthew; Harrison, Robert

    2014-03-01

    First-principles calculations of electron transport aim to understand the dynamics of electrons as they traverse quantum mechanical systems. For instance, how does electric current travel through a molecule? Despite their successes over the years, these calculations are known to be haunted by several numerical artifacts. Ghost transmission is among the most serious of these unphysical results, causing transmission coefficients to show an extreme dependence on the basis set and to be many orders of magnitude too large. In this talk, we discuss electron transport formalisms, uncover the cause of ghost transmission, develop exorcism strategies, and present several numerical examples. In the end, ghost transmission is a ramification of poorly chosen spatial partitions. Instead of choosing partitions with the basis set (in a manner reminiscent of Mulliken or Löwdin population analyses), the relevant projection operators must be selected without referencing the basis set.

  18. Quantum Interference and Ballistic Transmission in Nanotube Electron Waveguides

    SciTech Connect

    Kong, Jing; Yenilmez, Erhan; Tombler, Thomas W.; Kim, Woong; Dai, Hongjie; Laughlin, Robert B.; Liu, Lei; Jayanthi, C. S.; Wu, S. Y.

    2001-09-03

    The electron transport properties of well-contacted individual single-walled carbon nanotubes are investigated in the ballistic regime. Phase coherent transport and electron interference manifest as conductance fluctuations as a function of Fermi energy. Resonance with standing waves in finite-length tubes and localized states due to imperfections are observed for various Fermi energies. Two units of quantum conductance 2G{sub 0}=4e{sup 2}/h are measured for the first time, corresponding to the maximum conductance limit for ballistic transport in two channels of a nanotube.

  19. Simultaneous measurement of lateral and vertical size of nanoparticles using transmission scanning electron microscopy (TSEM)

    NASA Astrophysics Data System (ADS)

    Buhr, E.; Bug, M. U.; Bergmann, D.; Cizmar, P.; Frase, C. G.

    2017-03-01

    A scanning electron microscope operated in transmission mode (TSEM) enables both the measurement of the lateral and vertical size (thickness) of nanoparticles. The lateral size is measured with a previously described technique where the particle boundary is determined in the TSEM image. Particle thickness is deduced from the TSEM signal level measured at the centre of the particle, which requires prior knowledge of the expected TSEM signal level. We applied different and well-known Monte-Carlo based simulation tools (Geant4 and MCSEM) to describe the electron diffusion in solid states and to calculate the expected TSEM signals taking into account particle and instrument properties. The simulation results of the different simulation models differ slightly revealing current limits of small-angle and low-energy electron scattering modelling in solid states. Nonetheless, the method allows one to correlate lateral and vertical particle thickness and thus to obtain additional information about the 3D morphology of nanoparticles. We demonstrate the method for silica particles with sizes in the range of about 10 nm–100 nm.

  20. Solving the Accelerator-Condenser Coupling Problem in a Nanosecond Dynamic Transmission Electron Microscope

    SciTech Connect

    Reed, B W; LaGrange, T; Shuttlesworth, R M; Gibson, D J; Campbell, G H; Browning, N D

    2009-12-29

    We describe a modification to a transmission electron microscope (TEM) that allows it to briefly (using a pulsed-laser-driven photocathode) operate at currents in excess of 10 mA while keeping the effects of condenser lens aberrations to a minimum. This modification allows real-space imaging of material microstructure with a resolution of order 10 nm over regions several {micro}m across with an exposure time of 15 ns. This is more than 6 orders of magnitude faster than typical video-rate TEM imaging. The key is the addition of a weak magnetic lens to couple the large-diameter high-current beam exiting the accelerator into the acceptance aperture of a conventional TEM condenser lens system. We show that the performance of the system is essentially consistent with models derived from ray tracing and finite element simulations. The instrument can also be operated as a conventional TEM by using the electron gun in a thermionic mode. The modification enables very high electron current densities in {micro}m-sized areas and could also be used in a non-pulsed system for high-throughput imaging and analytical TEM.

  1. Low impact to fixed cell processing aiming transmission electron microscopy

    PubMed Central

    Barth, Ortrud Monika; da Silva, Marcos Alexandre Nunes; Barreto-Vieira, Debora Ferreira

    2016-01-01

    In cell culture, cell structures suffer strong impact due to centrifugation during processing for electron microscope observation. In order to minimise this effect, a new protocol was successfully developed. Using conventional reagents and equipments, it took over one week, but cell compression was reduced to none or the lowest deformation possible. PMID:27276186

  2. Free electron lasers for transmission of energy in space

    NASA Technical Reports Server (NTRS)

    Segall, S. B.; Hiddleston, H. R.; Catella, G. C.

    1981-01-01

    A one-dimensional resonant-particle model of a free electron laser (FEL) is used to calculate laser gain and conversion efficiency of electron energy to photon energy. The optical beam profile for a resonant optical cavity is included in the model as an axial variation of laser intensity. The electron beam profile is matched to the optical beam profile and modeled as an axial variation of current density. Effective energy spread due to beam emittance is included. Accelerators appropriate for a space-based FEL oscillator are reviewed. Constraints on the concentric optical resonator and on systems required for space operation are described. An example is given of a space-based FEL that would produce 1.7 MW of average output power at 0.5 micrometer wavelength with over 50% conversion efficiency of electrical energy to laser energy. It would utilize a 10 m-long amplifier centered in a 200 m-long optical cavity. A 3-amp, 65 meV electrostatic accelerator would provide the electron beam and recover the beam after it passes through the amplifier. Three to five shuttle flights would be needed to place the laser in orbit.

  3. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 9 2012-04-01 2012-04-01 false Standards for technologies for electronic transmission of orders. 1311.05 Section 1311.05 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS General § 1311.05 Standards for...

  4. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 9 2011-04-01 2011-04-01 false Standards for technologies for electronic transmission of orders. 1311.05 Section 1311.05 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS General § 1311.05 Standards for...

  5. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 9 2013-04-01 2013-04-01 false Standards for technologies for electronic transmission of orders. 1311.05 Section 1311.05 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS General § 1311.05 Standards for...

  6. 77 FR 50932 - Electronic Transmission of Customs Data-Outbound International Letter-Post Items

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-23

    ... 20 Electronic Transmission of Customs Data--Outbound International Letter-Post Items AGENCY: Postal... Standards of the United States Postal Service, International Mail Manual (IMM ) to require that customs data be electronically transmitted for international letter-post mailpieces bearing a customs...

  7. Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing.

    PubMed

    Raplee, J; Plotkowski, A; Kirka, M M; Dinwiddie, R; Okello, A; Dehoff, R R; Babu, S S

    2017-03-03

    To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. The purpose of the present study was to develop a method for properly calibrating temperature profiles from thermographic data to account for this emittance change and to determine important characteristics of the build through additional processing. The thermographic data was analyzed to identify the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, the thermal gradient and solid-liquid interface velocity were approximated and correlated to experimentally observed microstructural variation within the part. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.

  8. Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Raplee, J.; Plotkowski, A.; Kirka, M. M.; Dinwiddie, R.; Okello, A.; Dehoff, R. R.; Babu, S. S.

    2017-03-01

    To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. The purpose of the present study was to develop a method for properly calibrating temperature profiles from thermographic data to account for this emittance change and to determine important characteristics of the build through additional processing. The thermographic data was analyzed to identify the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, the thermal gradient and solid-liquid interface velocity were approximated and correlated to experimentally observed microstructural variation within the part. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.

  9. Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

    PubMed Central

    Raplee, J.; Plotkowski, A.; Kirka, M. M.; Dinwiddie, R.; Okello, A.; Dehoff, R. R.; Babu, S. S.

    2017-01-01

    To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. The purpose of the present study was to develop a method for properly calibrating temperature profiles from thermographic data to account for this emittance change and to determine important characteristics of the build through additional processing. The thermographic data was analyzed to identify the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, the thermal gradient and solid-liquid interface velocity were approximated and correlated to experimentally observed microstructural variation within the part. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control. PMID:28256595

  10. Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

    DOE PAGES

    Raplee, Jake B.; Plotkowski, Alex J.; Kirka, Michael M.; ...

    2017-03-03

    To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in-situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. This developed a method for properly calibrating temperature profiles from thermographic data and then determining important characteristics of the build through additional processing. The thermographic data was analyzed to determinemore » the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, we calculated the thermal gradient and solid-liquid interface velocity and correlated it to microstructural variation within the part experimentally. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.« less

  11. Understanding the structure of nanocatalysts with high resolution scanning/transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Francis, L. D.; Rivas, J.; José-Yacamán, M.

    2014-03-01

    Nanomaterials including nanoparticles, nanowires and nanotubes play an important role in heterogeneous catalysis. Thanks to the rapid improvement of the electron microscopic techniques and with the advent of aberration corrected electron microscopy as well as theoretical methodologies, the potential effects induced by nanocatalysts are better understood than before by unravelling their atomic structure. A brief introduction to advanced electron microscopic techniques namely aberration corrected scanning transmission electron microscopy (Cs-STEM) is presented and subsequently two examples of nanocatalysts are considered in the present review. The first example will focus on the study of bimetallic/core-shell nanoalloys. In heterogeneous catalysis, catalysts containing two or more metals might show significantly different catalytic properties compared to the parent metals and thus are widely utilized in several catalytic reactions. Atom-by-atom insights of the nanoalloy based catalysts ex: Au-Pd will be described in the present review using a combination of advanced electron microscopic and spectroscopic techniques. A related example on the understanding of bimetallic clusters by HAADF-STEM will also be presented in addition to nanoparticles. In the second case understanding the structure of transition metal chalcogenide based nanocatalysts by HRTEM and aberration corrected STEM, for the case of MoS2 will be discussed. MoS2-based catalysts serve as model catalysts and are employed in the hydrodesulphurisations (HDS) reactions in the removal of sulphur from gasoline and related petrochemical products. They have been studied in various forms including nanowires, nanotubes and nanoplates. Their structure, atomic insights and as a consequence elucidation of their corresponding catalytic activity are thus important.

  12. 36 CFR 1236.22 - What are the additional requirements for managing electronic mail records?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... requirements for managing electronic mail records? 1236.22 Section 1236.22 Parks, Forests, and Public Property... Requirements for Electronic Records § 1236.22 What are the additional requirements for managing electronic mail... requirements for electronic mail records: (1) The names of sender and all addressee(s) and date the message...

  13. 36 CFR 1236.22 - What are the additional requirements for managing electronic mail records?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements for managing electronic mail records? 1236.22 Section 1236.22 Parks, Forests, and Public Property... Requirements for Electronic Records § 1236.22 What are the additional requirements for managing electronic mail... requirements for electronic mail records: (1) The names of sender and all addressee(s) and date the message...

  14. 36 CFR 1236.22 - What are the additional requirements for managing electronic mail records?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirements for managing electronic mail records? 1236.22 Section 1236.22 Parks, Forests, and Public Property... Requirements for Electronic Records § 1236.22 What are the additional requirements for managing electronic mail... requirements for electronic mail records: (1) The names of sender and all addressee(s) and date the message...

  15. 36 CFR 1236.22 - What are the additional requirements for managing electronic mail records?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... requirements for managing electronic mail records? 1236.22 Section 1236.22 Parks, Forests, and Public Property... Requirements for Electronic Records § 1236.22 What are the additional requirements for managing electronic mail... requirements for electronic mail records: (1) The names of sender and all addressee(s) and date the message...

  16. Simulations of the electron cloud buildup and its influence on the microwave transmission measurement

    NASA Astrophysics Data System (ADS)

    Haas, Oliver Sebastian; Boine-Frankenheim, Oliver; Petrov, Fedor

    2013-11-01

    An electron cloud density in an accelerator can be measured using the Microwave Transmission (MWT) method. The aim of our study is to evaluate the influence of a realistic, nonuniform electron cloud on the MWT. We conduct electron cloud buildup simulations for beam pipe geometries and bunch parameters resembling roughly the conditions in the CERN SPS. For different microwave waveguide modes the phase shift induced by a known electron cloud density is obtained from three different approaches: 3D Particle-In-Cell (PIC) simulation of the electron response, a 2D eigenvalue solver for waveguide modes assuming a dielectric response function for cold electrons, a perturbative method assuming a sufficiently smooth density profile. While several electron cloud parameters, such as temperature, result in minor errors in the determined density, the transversely inhomogeneous density can introduce a large error in the measured electron density. We show that the perturbative approach is sufficient to describe the phase shift under realistic electron cloud conditions. Depending on the geometry of the beam pipe, the external magnetic field configuration and the used waveguide mode, the electron cloud density can be concentrated at the beam pipe or near the beam pipe center, leading to a severe over- or underestimation of the electron density. Electron cloud distributions are very inhomogeneous, especially in dipoles. These inhomogeneities affect the microwave transmission measurement results. Electron density might be over- or underestimated, depending on setup. This can be quantified with several models, e.g. a perturbative approach.

  17. Applying an information transmission approach to extract valence electron information from reconstructed exit waves.

    PubMed

    Xu, Qiang; Zandbergen, Henny W; Van Dyck, Dirk

    2011-06-01

    The knowledge of the valence electron distribution is essential for understanding the properties of materials. However this information is difficult to obtain from HREM images because it is easily obscured by the large scattering contribution of core electrons and by the strong dynamical scattering process. In order to develop a sensitive method to extract the information of valence electrons, we have used an information transmission approach to describe the electron interaction with the object. The scattered electron wave is decomposed in a set of basic functions, which are the eigen functions of the Hamiltonian of the projected electrostatic object potential. Each basic function behaves as a communication channel that transfers the information of the object with its own transmission characteristic. By properly combining the components of the different channels, it is possible to design a scheme to extract the information of valence electron distribution from a series of exit waves. The method is described theoretically and demonstrated by means of computer simulations.

  18. Electronic control system for control of electronic electric shift apparatus for manual transmission

    SciTech Connect

    Tury, E.L.; Thoe, G.A.

    1989-04-18

    An electrical control apparatus is described for control of a manual transmission apparatus in a motor vehicle having a plurality of transmission states selected by the position of a shift select lever, the electrical control apparatus comprising: a first electric motor; means drive by the first electric motor and operative in response to energization of the first electric motor to move the shift select lever laterally between left, center, and right locations; a second electric motor; means driven by the second electric motor and operative in response to energization of the second electric motor to move the shift select lever longitudinally between forward, neutral, and rearward locations; operator input means operative to generate a desired transmission sate signal corresponding to manual operator input; a first transmission state sensing means for indicating the left, center, or right location of the shift select lever; a second transmission state sensing means for indicating the forward, neutral or rearward location of the shift select lever; and a logic control unit connected to the operator input means and the first and second transmission state sensing means for generation of a sequence of motor drive signals corresponding to the sequence of motions required for movement of the shift select lever from the present transmission state to the desired transmission state when the desired transmission state differs from the present transmission state, the motor drive signals including a clockwise motor drive signal, a counter-clockwise motor drive signal, a shift up motor drive signal and a shift down motor drive signal.

  19. Robust image alignment for cryogenic transmission electron microscopy.

    PubMed

    McLeod, Robert A; Kowal, Julia; Ringler, Philippe; Stahlberg, Henning

    2016-12-27

    Cryo-electron microscopy recently experienced great improvements in structure resolution due to direct electron detectors with improved contrast and fast read-out leading to single electron counting. High frames rates enabled dose fractionation, where a long exposure is broken into a movie, permitting specimen drift to be registered and corrected. The typical approach for image registration, with high shot noise and low contrast, is multi-reference (MR) cross-correlation. Here we present the software package Zorro, which provides robust drift correction for dose fractionation by use of an intensity-normalized cross-correlation and logistic noise model to weight each cross-correlation in the MR model and filter each cross-correlation optimally. Frames are reliably registered by Zorro with low dose and defocus. Methods to evaluate performance are presented, by use of independently-evaluated even- and odd-frame stacks by trajectory comparison and Fourier ring correlation. Alignment of tiled sub-frames is also introduced, and demonstrated on an example dataset. Zorro source code is available at github.com/CINA/zorro.

  20. Scanning Transmission Electron Microscopy Using Selective High-Order Laue Zones: Three-Dimensional Atomic Ordering in Sodium Cobaltate

    NASA Astrophysics Data System (ADS)

    Huang, F.-T.; Gloter, A.; Chu, M.-W.; Chou, F. C.; Shu, G. J.; Liu, L.-K.; Chen, C. H.; Colliex, C.

    2010-09-01

    A new scanning transmission electron microscopy (STEM) imaging technique using high-order Laue zones (named HOLZ-STEM), a diffraction contrast which has been strenuously avoided or minimized in traditional STEM imaging, can be used to obtain the additional 1D periodic information along the electron propagation axis without sacrificing atomic resolution in the lateral (2D) dimension. HOLZ-STEM has been demonstrated to resolve the 3D long-range Na ordering of Na0.71CoO2. Direct evidence of spiral-like Na-trimer chains twisting along the c axis is unambiguously established in real space.

  1. Mass-mapping of ECM macromolecules by scanning transmission electron microscopy.

    PubMed

    Sherratt, Michael J; Graham, Helen K; Kielty, Cay M; Holmes, David F

    2009-01-01

    In the scanning transmission electron microscope, the degree of electron scattering induced by biological specimens, such as ECM macromolecules, is dependent on the molecular mass. By calibrating the ratio of scattered to non-scattered electrons against a known mass standard, such as tobacco mosaic virus, it is possible to quantify absolute changes in both mass and mass distribution. These mass mapping approaches can provide important information on ECM assembly, organisation, and interactions which is not obtainable by other means.

  2. Dynamical behaviour of nanocrystals in transmission electron microscopy: size, temperature or irradiation effects.

    PubMed

    Buffat, Philippe André

    2003-02-15

    High-resolution transmission electron microscopy shows that metal nanoparticles sinter within a fraction of a second under an electron beam at 'room temperature' as long as classical models of thermal equilibrium apply. Images exhibit crystal planes that change in orientation with time as if the particle was undergoing melting and resolidification processes. We explore whether these dynamical effects are the result of heating or transformation effects in the electron microscope or quantum fluctuations in small systems.

  3. Acquisition of a High Voltage/High resolution Transmission Electron Microscope.

    DTIC Science & Technology

    1988-08-21

    Electron Energy Loss Spectroscopy (EELS) The EELS is the study of energy distribution of electrons ...or aggregates of small particles can be studied directly by transmission electron mi- croscopy techniques (Fig. 7).12 17 - .,’ L -. 𔃾 " ", , M. 1.5 "m...characterization of the ceramic producrs in terms of imaging at all levels of resolution (from optical to atomic 21 resolution) by direct

  4. Electron transmission through bilayer graphene: A time-dependent first-principles study

    NASA Astrophysics Data System (ADS)

    Miyauchi, Hironari; Ueda, Yoshihiro; Suzuki, Yasumitsu; Watanabe, Kazuyuki

    2017-03-01

    Incident-energy-dependent electron transmittances through single-layer graphene (SLG) and bilayer graphene (BLG) were investigated using time-dependent density functional theory. The transmittances of BLG with two kinds of stacking exhibit an unexpected crossing at a certain incident electron energy. The behavior is preserved for the BLG with reduced or increased layer distances compared to that of typical BLG. We determined the origin of the crossing by investigating transmission electron diffraction patterns for SLG.

  5. Transmission electron microscopic pathoanatomy of congenital trigger thumb.

    PubMed

    Buchman, M T; Gibson, T W; McCallum, D; Cuda, D D; Ramos, A G

    1999-01-01

    Previous studies of trigger digits in children have been limited to gross morphology and light-microscopic histology. Nine children with 11 trigger thumbs formed a preliminary study group for electron-microscopic evaluation of tendon nodules and A-1 pulleys. This pathoanatomic investigation was not previously reported. Comparison was made with light-microscopic sections. Large amounts of mature collagen was observed. Fibroblasts with prominent rough endoplasmic reticulum were present. No degenerative or inflammatory changes were noted in either tendon or sheath. We believe that although the etiology of trigger digits is still uncertain, an infectious, inflammatory, or degenerative process is unlikely.

  6. Determining Projections of Grain Boundaries from Diffraction Data in Transmission Electron Microscope.

    PubMed

    Kiss, Ákos K; Lábár, János L

    2016-06-01

    Grain boundaries (GB) are characterized by disorientation of the neighboring grains and the direction of the boundary plane between them. A new approach presented here determines the projection of GB that can be used to determine the latter one. The novelty is that an additional parameter of GB is quantified in addition to the ones provided by the orientation maps, namely the width of the projection of the GB is measured from the same set of diffraction patterns that were recorded for the orientation map, without the need to take any additional images. The diffraction patterns are collected in nanobeam diffraction mode in a transmission electron microscope, pixel-by-pixel, from an area containing two neighboring grains and the boundary between them. In our case, the diffraction patterns were recorded using the beam scanning function of a commercially available system (ASTAR). Our method is based on non-negative matrix factorization applied to the mentioned set of diffraction patterns. The method is encoded in a MATLAB environment, making the results easy to interpret and visualize. The measured GB-projection width is used to determine the orientation of the GB-plane, as given in the study by Kiss et al.

  7. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    PubMed Central

    Jesse, S.; Chi, M.; Belianinov, A.; Beekman, C.; Kalinin, S. V.; Borisevich, A. Y.; Lupini, A. R.

    2016-01-01

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called “big-data” methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. However, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy. PMID:27211523

  8. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    SciTech Connect

    Jesse, S.; Chi, M.; Belianinov, A.; Beekman, C.; Kalinin, S. V.; Borisevich, A. Y.; Lupini, A. R.

    2016-05-23

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. In this paper, we discuss the application of so-called “big-data” methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. Finally, however, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.

  9. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    DOE PAGES

    Jesse, S.; Chi, M.; Belianinov, A.; ...

    2016-05-23

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. In this paper, we discuss the application of so-called “big-data” methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature andmore » does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. Finally, however, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.« less

  10. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography.

    PubMed

    Jesse, S; Chi, M; Belianinov, A; Beekman, C; Kalinin, S V; Borisevich, A Y; Lupini, A R

    2016-05-23

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called "big-data" methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. However, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.

  11. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    NASA Astrophysics Data System (ADS)

    Jesse, S.; Chi, M.; Belianinov, A.; Beekman, C.; Kalinin, S. V.; Borisevich, A. Y.; Lupini, A. R.

    2016-05-01

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called “big-data” methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. However, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.

  12. Automatic grading of carbon blacks from transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Luengo, L.; Treuillet, S.; Gomez, E.

    2015-04-01

    Carbon blacks are widely used as filler in industrial products to modify their mechanical, electrical and optical properties. For rubber products, they are the subject of a standard classification system relative to their surface area, particle size and structure. The electron microscope remains the most accurate means of measuring these characteristics on condition that boundaries of aggregates and particles are correctly detected. In this paper, we propose an image processing chain allowing subsequent characterization for automatic grading of the carbon black aggregates. Based on literature review, 31 features are extracted from TEM images to obtain reliable information on the particle size, the shape and microstructure of the carbon black aggregates. Then, they are used for training several classifiers to compare their results for automatic grading. To obtain better results, we suggest to use a cluster identification of aggregates in place of the individual characterization of aggregates.

  13. In situ transmission electron microscopy of cadmium selenide nanorod sublimation

    SciTech Connect

    Hellebusch, Daniel J.; Manthiram, Karthish; Beberwyck, Brandon J.; Alivisatos, A. Paul

    2015-01-23

    In situ electron microscopy is used to observe the morphological evolution of cadmium selenide nanorods as they sublime under vacuum at a series of elevated temperatures. Mass loss occurs anisotropically along the nanorod’s long axis. At temperatures close to the sublimation threshold, the phase change occurs from both tips of the nanorods and proceeds unevenly with periods of rapid mass loss punctuated by periods of relative stability. At higher temperatures, the nanorods sublime at a faster, more uniform rate, but mass loss occurs from only a single end of the rod. Furthermore, we propose a mechanism that accounts for the observed sublimation behavior based on the terrace–ledge–kink (TLK) model and how the nanorod surface chemical environment influences the kinetic barrier of sublimation.

  14. In Situ Transmission Electron Microscopy of Cadmium Selenide Nanorod Sublimation.

    PubMed

    Hellebusch, Daniel J; Manthiram, Karthish; Beberwyck, Brandon J; Alivisatos, A Paul

    2015-02-19

    In situ electron microscopy is used to observe the morphological evolution of cadmium selenide nanorods as they sublime under vacuum at a series of elevated temperatures. Mass loss occurs anisotropically along the nanorod's long axis. At temperatures close to the sublimation threshold, the phase change occurs from both tips of the nanorods and proceeds unevenly with periods of rapid mass loss punctuated by periods of relative stability. At higher temperatures, the nanorods sublime at a faster, more uniform rate, but mass loss occurs from only a single end of the rod. We propose a mechanism that accounts for the observed sublimation behavior based on the terrace-ledge-kink (TLK) model and how the nanorod surface chemical environment influences the kinetic barrier of sublimation.

  15. Electronic transport on the nanoscale: ballistic transmission and Ohm's law.

    PubMed

    Homoth, J; Wenderoth, M; Druga, T; Winking, L; Ulbrich, R G; Bobisch, C A; Weyers, B; Bannani, A; Zubkov, E; Bernhart, A M; Kaspers, M R; Möller, R

    2009-04-01

    If a current of electrons flows through a normal conductor (in contrast to a superconductor), it is impeded by local scattering at defects as well as phonon scattering. Both effects contribute to the voltage drop observed for a macroscopic complex system as described by Ohm's law. Although this concept is well established, it has not yet been measured around individual defects on the atomic scale. We have measured the voltage drop at a monatomic step in real space by restricting the current to a surface layer. For the Si(111)-( [see text]3 x [see text]3)-Ag surface a monotonous transition with a width below 1 nm was found. A numerical analysis of the data maps the current flow through the complex network and the interplay between defect-free terraces and monatomic steps.

  16. In situ transmission electron microscopy of cadmium selenide nanorod sublimation

    DOE PAGES

    Hellebusch, Daniel J.; Manthiram, Karthish; Beberwyck, Brandon J.; ...

    2015-01-23

    In situ electron microscopy is used to observe the morphological evolution of cadmium selenide nanorods as they sublime under vacuum at a series of elevated temperatures. Mass loss occurs anisotropically along the nanorod’s long axis. At temperatures close to the sublimation threshold, the phase change occurs from both tips of the nanorods and proceeds unevenly with periods of rapid mass loss punctuated by periods of relative stability. At higher temperatures, the nanorods sublime at a faster, more uniform rate, but mass loss occurs from only a single end of the rod. Furthermore, we propose a mechanism that accounts for themore » observed sublimation behavior based on the terrace–ledge–kink (TLK) model and how the nanorod surface chemical environment influences the kinetic barrier of sublimation.« less

  17. Nanocuvette: A Functional Ultrathin Liquid Container for Transmission Electron Microscopy.

    PubMed

    Wadell, Carl; Inagaki, Satoshi; Nakamura, Tomiro; Shi, Ji; Nakamura, Yoshio; Sannomiya, Takumi

    2017-02-28

    Advances in TEM techniques have spurred a renewed interest in a wide variety of research fields. A rather recent track within these endeavors is the use of TEM for in situ imaging in liquids. In this article, we show the fabrication of a liquid cell for TEM observations which we call the nanocuvette. The structure consists of a nanohole film sandwiched by carbon films, sealing liquid in the holes. The hole film can be produced using a variety of materials, tailored for the desired application. Since the fabrication is based on self-assembly, it is both cheap and straightforward. Compared to previously reported liquid cells, this structure allows for thinner liquid layers with better controlled cell structures, making it possible to achieve a high resolution even at lower acceleration voltages and electron doses. We demonstrate a resolution corresponding to an information transfer up to ∼2 nm at 100 kV for molecular imaging. Apart from the advantages arising from the thin liquid layer, the nanocuvette also enables the possibility to study liquid-solid interfaces at the side walls of the nanoholes. We illustrate the possibilities of the nanocuvette by studying several model systems: electron beam induced growth dynamics of silver nanoparticles in salt solution, polymer deposition from solution, and imaging of nonstained antibodies in solution. Finally, we show how the inclusion of a plasmonically active gold layer in the nanocuvette structure enables optical confirmation of successful liquid encapsulation prior to TEM studies. The nanocuvette provides an easily fabricated and flexible platform which can help further the understanding of reactions, processes, and conformation of molecules and atoms in liquid environments.

  18. Numerical simulation of microwave transmission in the presence of an electron cloud

    NASA Astrophysics Data System (ADS)

    Sonnad, Kiran; Veitzer, Seth; Stoltz, Peter; Furman, Miguel; Cary, John

    2007-11-01

    Electron cloud effects on the transmission of microwaves through beam pipes in the CERN SPS experiment and the PEP-II Low Energy Ring (LER) at SLAC have been recently observed. Electrons within the vacuum chamber generated primarily via secondary electron emission have been observed to cause a phase shift in microwaves injected into the vacuum chamber. Understanding this effect may provide a useful diagnostic tool for measuring electron cloud densities in accelerators. We present numerical simulation results generated by the electromagnetic Particle-In-Cell (PIC) code VORPAL, which predicts this phase shift. We also measure the effects of non-uniform electron cloud density and externally applied magnetic fields on the transmission properties, and compare our predictions to recent experiments at the PEP-II LER.

  19. The spatial coherence function in scanning transmission electron microscopy and spectroscopy.

    PubMed

    Nguyen, D T; Findlay, S D; Etheridge, J

    2014-11-01

    We investigate the implications of the form of the spatial coherence function, also referred to as the effective source distribution, for quantitative analysis in scanning transmission electron microscopy, and in particular for interpreting the spatial origin of imaging and spectroscopy signals. These questions are explored using three different source distribution models applied to a GaAs crystal case study. The shape of the effective source distribution was found to have a strong influence not only on the scanning transmission electron microscopy (STEM) image contrast, but also on the distribution of the scattered electron wavefield and hence on the spatial origin of the detected electron intensities. The implications this has for measuring structure, composition and bonding at atomic resolution via annular dark field, X-ray and electron energy loss STEM imaging are discussed.

  20. Proton Transmitting Energy Spectra and Transmission Electron Microscope Examinations of Biological Samples

    NASA Astrophysics Data System (ADS)

    Tan, Chun-yu; Xia, Yue-yuan; Zhang, Jian-hua; Mu, Yu-guang; Wang, Rui-jin; Liu, Ji-tian; Liu, Xiang-dong; Yu, Zeng-liang

    1999-02-01

    Transmission energy spectra of 530 keV H+ ion penetrating 140 μm thick seed coat of maize and fruit peel of grape with thickness of 100 μm were measured. The result indicates that these thick biological targets, as seen by the penetrating ions, are inhomogeneous, and there are open "channel like" paths along which the incident ions can transmit the targets easily. While most of the incident ions are stopped in the targets, some of the transmitting ions only lose a small fraction of their initial incident energy. The transmission energy spectra show a pure electronic stopping feature. Transmission electron microscope (TEM) micrographes taken from the samples of seed coat of maize and fruit peel of tomato with thickness of 60 μm indicate that 150 keV electron beam from the TEM can penetrate the thick samples to give very good images with clear contrasts.

  1. Automated Detection of Synapses in Serial Section Transmission Electron Microscopy Image Stacks

    PubMed Central

    Kreshuk, Anna; Koethe, Ullrich; Pax, Elizabeth; Bock, Davi D.; Hamprecht, Fred A.

    2014-01-01

    We describe a method for fully automated detection of chemical synapses in serial electron microscopy images with highly anisotropic axial and lateral resolution, such as images taken on transmission electron microscopes. Our pipeline starts from classification of the pixels based on 3D pixel features, which is followed by segmentation with an Ising model MRF and another classification step, based on object-level features. Classifiers are learned on sparse user labels; a fully annotated data subvolume is not required for training. The algorithm was validated on a set of 238 synapses in 20 serial 7197×7351 pixel images (4.5×4.5×45 nm resolution) of mouse visual cortex, manually labeled by three independent human annotators and additionally re-verified by an expert neuroscientist. The error rate of the algorithm (12% false negative, 7% false positive detections) is better than state-of-the-art, even though, unlike the state-of-the-art method, our algorithm does not require a prior segmentation of the image volume into cells. The software is based on the ilastik learning and segmentation toolkit and the vigra image processing library and is freely available on our website, along with the test data and gold standard annotations (http://www.ilastik.org/synapse-detection/sstem). PMID:24516550

  2. Dark field imaging of biological macromolecules with the scanning transmission electron microscope

    PubMed Central

    Ohtsuki, Mitsuo; Isaacson, Michael S.; Crewe, A. V.

    1979-01-01

    A scanning transmission electron microscope (STEM) equipped with a field emission gun has been employed for the examination of biological macromolecules at high resolution. The quality of micrographs obtained with the STEM is dependent upon the quality of the substrate used to support biological objects because the image contrast in dark field is proportional to the mass density of the specimen. In order to reduce deleterious effects of the substrates on the image quality, we have developed a method of fabricating substrates consisting of very thin, very clean carbon films supported on very clean fenestrated plastic films. These films are approximately 15 Å thick. Well-known biological macromolecules such as glutamine synthetase and tobacco mosaic virus (both stained) and low-density lipoprotein and ferritin (both unstained were placed on these substrates and examined with the STEM by using various modes of contrast. The micrographs obtained by using the dark field mode of contrast employing an annular detector were free from phase contrast, as expected. Using this contrast mode, we have been able to directly observe (in-focus) 2.5- to 4.4-Å lattice spacings in the ferritin core. The effect of electron radiation damage on the helical structure of tobacco mosaic virus was also examined. Micrographs as well as corresponding optical diffraction patterns obtained with moderately low doses showed very clear helical structure from both sides of the virus. In addition, the (11.5 Å)-1 layer lines indicated the effective resolution attained on these particles. Images PMID:35788

  3. An efficient and cost-effective method for preparing transmission electron microscopy samples from powders

    DOE PAGES

    Wen, Haiming; Lin, Yaojun; Seidman, David N.; ...

    2015-09-09

    The preparation of transmission electron microcopy (TEM) samples from powders with particle sizes larger than ~100 nm poses a challenge. The existing methods are complicated and expensive, or have a low probability of success. Herein, we report a modified methodology for preparation of TEM samples from powders, which is efficient, cost-effective, and easy to perform. This method involves mixing powders with an epoxy on a piece of weighing paper, curing the powder–epoxy mixture to form a bulk material, grinding the bulk to obtain a thin foil, punching TEM discs from the foil, dimpling the discs, and ion milling the dimpledmore » discs to electron transparency. Compared with the well established and robust grinding–dimpling–ion-milling method for TEM sample preparation for bulk materials, our modified approach for preparing TEM samples from powders only requires two additional simple steps. In this article, step-by-step procedures for our methodology are described in detail, and important strategies to ensure success are elucidated. Furthermore, our methodology has been applied successfully for preparing TEM samples with large thin areas and high quality for many different mechanically milled metallic powders.« less

  4. An efficient and cost-effective method for preparing transmission electron microscopy samples from powders

    SciTech Connect

    Wen, Haiming; Lin, Yaojun; Seidman, David N.; Schoenung, Julie M.; van Rooyen, Isabella J.; Lavernia, Enrique J.

    2015-09-09

    The preparation of transmission electron microcopy (TEM) samples from powders with particle sizes larger than ~100 nm poses a challenge. The existing methods are complicated and expensive, or have a low probability of success. Herein, we report a modified methodology for preparation of TEM samples from powders, which is efficient, cost-effective, and easy to perform. This method involves mixing powders with an epoxy on a piece of weighing paper, curing the powder–epoxy mixture to form a bulk material, grinding the bulk to obtain a thin foil, punching TEM discs from the foil, dimpling the discs, and ion milling the dimpled discs to electron transparency. Compared with the well established and robust grinding–dimpling–ion-milling method for TEM sample preparation for bulk materials, our modified approach for preparing TEM samples from powders only requires two additional simple steps. In this article, step-by-step procedures for our methodology are described in detail, and important strategies to ensure success are elucidated. Furthermore, our methodology has been applied successfully for preparing TEM samples with large thin areas and high quality for many different mechanically milled metallic powders.

  5. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  6. Transmission Electron Microscopy of Bombyx Mori Silk Fibers

    NASA Astrophysics Data System (ADS)

    Shen, Y.; Martin, D. C.

    1997-03-01

    The microstructure of B. Mori silk fibers before and after degumming was examined by TEM, selected area electron diffraction (SAED), WAXS and low voltage SEM. SEM micrographs of the neat cocoon revealed a network of pairs of twisting filaments. After degumming, there were only individual filaments showing a surface texture consistent with an oriented fibrillar structure in the fiber interior. WAXS patterns confirmed the oriented beta-sheet crystal structure common to silkworm and spider silks. Low dose SAED results were fully consistent with the WAXS data, and revealed that the crystallographic texture did not vary significantly across the fiber diameter. TEM observations of microtomed fiber cross sections indicated a somewhat irregular shape, and also revealed a 0.5-2 micron sericin coating which was removed by the degumming process. TEM observations of the degummed silk fiber showed banded features with a characteristic spacing of nominally 600 nm along the fiber axis. These bands were oriented in a roughly parabolic or V-shape pointing along one axis within a given fiber. We hypothesize that this orientation is induced by the extrusion during the spinning process. Equatorial DF images revealed that axial and lateral sizes of the β-sheet crystallites in silk fibroin ranged from 20 to 170 nm and from 1 to 24 nm, respectively. Crazes developed in the degummed silk fiber parallel to the fiber direction. The formation of these crazes suggests that there are significant lateral interactions between fibrils in silk fibers.

  7. Removal of Vesicle Structures From Transmission Electron Microscope Images

    PubMed Central

    Jensen, Katrine Hommelhoff; Sigworth, Fred J.; Brandt, Sami Sebastian

    2016-01-01

    In this paper, we address the problem of imaging membrane proteins for single-particle cryo-electron microscopy reconstruction of the isolated protein structure. More precisely, we propose a method for learning and removing the interfering vesicle signals from the micrograph, prior to reconstruction. In our approach, we estimate the subspace of the vesicle structures and project the micrographs onto the orthogonal complement of this subspace. We construct a 2d statistical model of the vesicle structure, based on higher order singular value decomposition (HOSVD), by considering the structural symmetries of the vesicles in the polar coordinate plane. We then propose to lift the HOSVD model to a novel hierarchical model by summarizing the multidimensional HOSVD coefficients by their principal components. Along with the model, a solid vesicle normalization scheme and model selection criterion are proposed to make a compact and general model. The results show that the vesicle structures are accurately separated from the background by the HOSVD model that is also able to adapt to the asymmetries of the vesicles. This is a promising result and suggests even wider applicability of the proposed approach in learning and removal of statistical structures. PMID:26642456

  8. Visualization of newt aragonitic otoconial matrices using transmission electron microscopy

    NASA Technical Reports Server (NTRS)

    Steyger, P. S.; Wiederhold, M. L.

    1995-01-01

    Otoconia are calcified protein matrices within the gravity-sensing organs of the vertebrate vestibular system. These protein matrices are thought to originate from the supporting or hair cells in the macula during development. Previous studies of mammalian calcitic, barrel-shaped otoconia revealed an organized protein matrix consisting of a thin peripheral layer, a well-defined organic core and a flocculent matrix inbetween. No studies have reported the microscopic organization of the aragonitic otoconial matrix, despite its protein characterization. Pote et al. (1993b) used densitometric methods and inferred that prismatic (aragonitic) otoconia have a peripheral protein distribution, compared to that described for the barrel-shaped, calcitic otoconia of birds, mammals, and the amphibian utricle. By using tannic acid as a negative stain, we observed three kinds of organic matrices in preparations of fixed, decalcified saccular otoconia from the adult newt: (1) fusiform shapes with a homogenous electron-dense matrix; (2) singular and multiple strands of matrix; and (3) more significantly, prismatic shapes outlined by a peripheral organic matrix. These prismatic shapes remain following removal of the gelatinous matrix, revealing an internal array of organic matter. We conclude that prismatic otoconia have a largely peripheral otoconial matrix, as inferred by densitometry.

  9. Utility of Transmission Electron Microscopy in Small Round Cell Tumors

    PubMed Central

    Kim, Na Rae; Ha, Seung Yeon; Cho, Hyun Yee

    2015-01-01

    Small round cell tumors (SRCTs) are a heterogeneous group of neoplasms composed of small, primitive, and undifferentiated cells sharing similar histology under light microscopy. SRCTs include Ewing sarcoma/peripheral neuroectodermal tumor family tumors, neuroblastoma, desmoplastic SRCT, rhabdomyosarcoma, poorly differentiated round cell synovial sarcoma, mesenchymal chondrosarcoma, small cell osteosarcoma, small cell malignant peripheral nerve sheath tumor, and small cell schwannoma. Non-Hodgkin’s malignant lymphoma, myeloid sarcoma, malignant melanoma, and gastrointestinal stromal tumor may also present as SRCT. The current shift towards immunohistochemistry and cytogenetic molecular techniques for SRCT may be inappropriate because of antigenic overlapping or inconclusive molecular results due to the lack of differentiation of primitive cells and unavailable genetic service or limited moleculocytogenetic experience. Although usage has declined, electron microscopy (EM) remains very useful and shows salient features for the diagnosis of SRCTs. Although EM is not always required, it provides reliability and validity in the diagnosis of SRCT. Here, the ultrastructural characteristics of SRCTs are reviewed and we suggest that EM would be utilized as one of the reliable modalities for the diagnosis of undifferentiated and poorly differentiated SRCTs. PMID:25812730

  10. Probing core-electron orbitals by scanning transmission electron microscopy and measuring the delocalization of core-level excitations

    NASA Astrophysics Data System (ADS)

    Jeong, Jong Seok; Odlyzko, Michael L.; Xu, Peng; Jalan, Bharat; Mkhoyan, K. Andre

    2016-04-01

    By recording low-noise energy-dispersive x-ray spectroscopy maps from crystalline specimens using aberration-corrected scanning transmission electron microscopy, it is possible to probe core-level electron orbitals in real space. Both the 1 s and 2 p orbitals of Sr and Ti atoms in SrTi O3 are probed, and their projected excitation potentials are determined. This paper also demonstrates experimental measurement of the electronic excitation impact parameter and the delocalization of an excitation due to Coulombic beam-orbital interaction.

  11. Transmission electron microscopy investigations of AZ91 alloy deformed by equal-channel angular pressing.

    PubMed

    Braszczyńska-Malik, K N; Lityńska, L; Baliga, W

    2006-10-01

    The microstructure of transverse and longitudinal sections of a commercial AZ91 alloy processed by equal-channel angular pressing was examined by transmission electron microscopy. A high dislocation density and large number of deformation twins were observed in the investigated material. The {102}(matrix) // {012}(twin) twinning system was determined by selection area diffraction patterns obtained from the twin and matrix. Transmission electron microscopy analyses also revealed that the twins interacted with each other and pile-ups of dislocations occurred near the twin boundary.

  12. Visualizing Macromolecular Complexes with In Situ Liquid Scanning Transmission Electron Microscopy

    SciTech Connect

    Evans, James E.; Jungjohann, K. L.; Wong, Peony C. K.; Chiu, Po-Lin; Dutrow, Gavin H.; Arslan, Ilke; Browning, Nigel D.

    2012-11-01

    A central focus of biological research is understanding the structure/function relationship of macromolecular protein complexes. Yet conventional transmission electron microscopy techniques are limited to static observations. Here we present the first direct images of purified macromolecular protein complexes using in situ liquid scanning transmission electron microscopy. Our results establish the capability of this technique for visualizing the interface between biology and nanotechnology with high fidelity while also probing the interactions of biomolecules within solution. This method represents an important advancement towards allowing future high-resolution observations of biological processes and conformational dynamics in real-time.

  13. Unfolding linac photon spectra and incident electron energies from experimental transmission data, with direct independent validation

    SciTech Connect

    Ali, E. S. M.; McEwen, M. R.; Rogers, D. W. O.

    2012-11-15

    Purpose: In a recent computational study, an improved physics-based approach was proposed for unfolding linac photon spectra and incident electron energies from transmission data. In this approach, energy differentiation is improved by simultaneously using transmission data for multiple attenuators and detectors, and the unfolding robustness is improved by using a four-parameter functional form to describe the photon spectrum. The purpose of the current study is to validate this approach experimentally, and to demonstrate its application on a typical clinical linac. Methods: The validation makes use of the recent transmission measurements performed on the Vickers research linac of National Research Council Canada. For this linac, the photon spectra were previously measured using a NaI detector, and the incident electron parameters are independently known. The transmission data are for eight beams in the range 10-30 MV using thick Be, Al and Pb bremsstrahlung targets. To demonstrate the approach on a typical clinical linac, new measurements are performed on an Elekta Precise linac for 6, 10 and 25 MV beams. The different experimental setups are modeled using EGSnrc, with the newly added photonuclear attenuation included. Results: For the validation on the research linac, the 95% confidence bounds of the unfolded spectra fall within the noise of the NaI data. The unfolded spectra agree with the EGSnrc spectra (calculated using independently known electron parameters) with RMS energy fluence deviations of 4.5%. The accuracy of unfolding the incident electron energy is shown to be {approx}3%. A transmission cutoff of only 10% is suitable for accurate unfolding, provided that the other components of the proposed approach are implemented. For the demonstration on a clinical linac, the unfolded incident electron energies and their 68% confidence bounds for the 6, 10 and 25 MV beams are 6.1 {+-} 0.1, 9.3 {+-} 0.1, and 19.3 {+-} 0.2 MeV, respectively. The unfolded spectra

  14. Visualizing macromolecular complexes with in situ liquid scanning transmission electron microscopy.

    PubMed

    Evans, James E; Jungjohann, Katherine L; Wong, Peony C K; Chiu, Po-Lin; Dutrow, Gavin H; Arslan, Ilke; Browning, Nigel D

    2012-11-01

    A central focus of biological research is understanding the structure/function relationship of macromolecular protein complexes. Yet conventional transmission electron microscopy techniques are limited to static observations. Here we present the first direct images of purified macromolecular protein complexes using in situ liquid scanning transmission electron microscopy. Our results establish the capability of this technique for visualizing the interface between biology and nanotechnology with high fidelity while also probing the interactions of biomolecules within solution. This method represents an important advancement towards allowing future high-resolution observations of biological processes and conformational dynamics in real-time.

  15. Choice of operating voltage for a transmission electron microscope.

    PubMed

    Egerton, R F

    2014-10-01

    An accelerating voltage of 100-300kV remains a good choice for the majority of TEM or STEM specimens, avoiding the expense of high-voltage microscopy but providing the possibility of atomic resolution even in the absence of lens-aberration correction. For specimens thicker than a few tens of nm, the image intensity and scattering contrast are likely to be higher than at lower voltage, as is the visibility of ionization edges below 1000eV (as required for EELS elemental analysis). In thick (>100nm) specimens, higher voltage ensures less beam broadening and better spatial resolution for STEM imaging and EDX spectroscopy. Low-voltage (e.g. 30kV) TEM or STEM is attractive for a very thin (e.g. 10nm) specimen, as it provides higher scattering contrast and fewer problems for valence-excitation EELS. Specimens that are immune to radiolysis suffer knock-on damage at high current densities, and this form of radiation damage can be reduced or avoided by choosing a low accelerating voltage. Low-voltage STEM with an aberration-corrected objective lens (together with a high-angle dark-field detector and/or EELS) offers atomic resolution and elemental identification from very thin specimens. Conventional TEM can provide atomic resolution in low-voltage phase-contrast images but requires correction of chromatic aberration and preferably an electron-beam monochromator. Many non-conducting (e.g. organic) specimens damage easily by radiolysis and radiation damage then determines the TEM image resolution. For bright-field scattering contrast, low kV can provide slightly better dose-limited resolution if the specimen is very thin (a few nm) but considerably better resolution is possible from a thicker specimen, for which higher kV is required. Use of a phase plate in a conventional TEM offers the most dose-efficient way of achieving atomic resolution from beam-sensitive specimens.

  16. Transmission Electron Microscopy of Non-Etched Presolar Silicon Carbide

    NASA Technical Reports Server (NTRS)

    Stroud, Rhonda M.; Nittler, Larry R.; Alexander, Conel M. O'D.; Bernatowicz, Thomas J.; Messenger, Scott R.

    2003-01-01

    Our solar system formed from nuclei produced in earlier generations of stars. Mixing in the proto-solar nebula isotopically homogenized most of this material, but some grains, called presolar grains, retain their original isotopic composition. The isotopic properties of presolar SiC grains indicate that most of the grains formed in the outflows of carbon-rich Asymptotic Giant Branch (AGB) stars. The microstructure of these presolar grains reflects the conditions of the dust formation and subsequent alteration. Early microstructural studies of SiC grains obtained by acid dissolution from meteorites show that most isotopically anomalous SiC grains have the face-centered cubic b- SiC structure. However, Daulton et al. have shown that a small fraction of sub-micron presolar SiC grains are of the hexagonal 2H polytype (a-SiC). Although the harsh chemical treatments of these grains does not alter their crystal structure, significant alteration of the surface morphology of the grains due to the acid treatments has been observed. In addition, the acid treatments may preferentially remove cracked or fissured grains, and possible sub-grains, such as graphite. By studying SiC grains isolated by physical separation and found in situ, we attempt to obtain a more complete analysis of presolar SiC microstructures, including the surface morphology, in order to address the formation and processing history of the grains. In our prior work, we reported on one in situ SiC grain (hereafter CBIS1). Here we present results from two additional grains, one in situ, and one prepared as a physical separate.

  17. Transmission electron microscopy and electrical transport investigations performed on the same single-walled carbon nanotube

    SciTech Connect

    Philipp, G.; Burghard, M.; Roth, S.

    1998-08-11

    Electrical transport measurements and high resolution transmission electron microscopy performed on the same (rope of) single-walled carbon nanotube(s) (SWCNTs) allow to establish links between structural and electronic properties of the tubes. The tubes are deposited on electron transparent ultrathin Si{sub 3}N{sub 4}-membranes bearing Cr/AuPd-electrodes defined by electron beam lithography. TEM-micrographs of the setup reveal mostly ropes consisting of 2-3 tubes which also appear on a scanning force microscope image of the same area. A current-voltage trace of the ropes at 4.2 K is also presented.

  18. Characterization of aluminum oxide tunnel barriers by combining transport measurements and transmission electron microscopy imaging

    SciTech Connect

    Aref, T.; Averin, A.; Nguyend, H. Q.; Pekola, J. P.; Dijken, S. van; Yao, L. D.; Ferring, A.; Koberidze, M.; Nieminen, R. M.

    2014-08-21

    We present two approaches for studying the uniformity of a tunnel barrier. The first approach is based on measuring single-electron and two-electron tunneling in a hybrid single-electron transistor. Our measurements indicate that the effective area of a conduction channel is about one order of magnitude larger than predicted by theoretical calculations. With the second method, transmission electron microscopy, we demonstrate that variations in the barrier thickness are a plausible explanation for the larger effective area and an enhancement of higher order tunneling processes.

  19. Flux pinning by Al-based nanoparticles embedded in YBCO: A transmission electron microscopic study

    NASA Astrophysics Data System (ADS)

    Ben Azzouz, F.; Zouaoui, M.; Mellekh, A.; Annabi, M.; Van Tendeloo, G.; Ben Salem, M.

    2007-05-01

    A series of YBa2Cu3Oy (YBCO) samples with small amounts (0-0.6 wt.%) of nanosized alumina particles (50 nm) are synthesized in air by solid state reaction. The microstructure has been characterized by transmission electron microscopy (TEM) and the critical current density Jc has been measured by the standard four-probe method in the applied magnetic field at 77 K. TEM and energy dispersive X-ray spectroscopy (EDS) analysis have shown that alumina reacts with the YBCO matrix to form nanometric aluminium-rich inhomogeneities intergrown within the YBCO superconducting matrix. These inhomogeneities reduce the onset transition temperature Tconset and the zero resistance temperature Tc. In spite of the monotonic decrease of the superconducting temperature Tc with increasing alumina addition, the Jc(H) behaviour is remarkably improved. The characteristic behaviour of Jc can be explained in terms of the counterbalance of two effects simultaneously caused by the nanometric alumina addition in the system. One effect is the formation of the Al-rich nanometric inhomogeneities relevant for the flux pinning, and the other effect is the reduction of matrix superconducting volume, which is reflected by a decrease of the critical current density Jc at zero applied magnetic field.

  20. Efficient linear phase contrast in scanning transmission electron microscopy with matched illumination and detector interferometry

    NASA Astrophysics Data System (ADS)

    Ophus, Colin; Ciston, Jim; Pierce, Jordan; Harvey, Tyler R.; Chess, Jordan; McMorran, Benjamin J.; Czarnik, Cory; Rose, Harald H.; Ercius, Peter

    2016-02-01

    The ability to image light elements in soft matter at atomic resolution enables unprecedented insight into the structure and properties of molecular heterostructures and beam-sensitive nanomaterials. In this study, we introduce a scanning transmission electron microscopy technique combining a pre-specimen phase plate designed to produce a probe with structured phase with a high-speed direct electron detector to generate nearly linear contrast images with high efficiency. We demonstrate this method by using both experiment and simulation to simultaneously image the atomic-scale structure of weakly scattering amorphous carbon and strongly scattering gold nanoparticles. Our method demonstrates strong contrast for both materials, making it a promising candidate for structural determination of heterogeneous soft/hard matter samples even at low electron doses comparable to traditional phase-contrast transmission electron microscopy. Simulated images demonstrate the extension of this technique to the challenging problem of structural determination of biological material at the surface of inorganic crystals.

  1. Resonant Transmission of Electron Spin States through Multiple Aharonov-Bohm Rings

    NASA Astrophysics Data System (ADS)

    Cutright, Jim; Hedin, Eric; Joe, Yong

    2011-10-01

    An Aharonov-Bohm (AB) ring with embedded quantum dots (QD) in each arm and one -dimensional nanowires attached as leads acts as a primitive cell in this analysis. When a tunable, external magnetic field is parallel to the surface area of the ring it causes Zeeman splitting in the energy levels of the QDs. An electron that traverses these energy levels has the potential to interfere with other electrons and to produce spin polarized output. It is already known that upon output the transmission of the electrons through this system will have a resonant peak at each Zeeman split energy level. A system where multiple AB rings are connected in series is studied, to see how having the electrons pass through multiple, identical rings effects the resonant peaks in the transmission and the degree of spin polarization.

  2. Multifractal scaling of electronic transmission resonances in perfect and imperfect Fibonacci δ-function potentials

    NASA Astrophysics Data System (ADS)

    Thakur, PrabhatK.; Biswas, Parthapratim

    We present here a detailed multifractal scaling study for the electronic transmission resonances with the system size for an infinitely large one-dimensional perfect and imperfect quasiperiodic system represented by a sequence of δ-function potentials. The electronic transmission resonances in the energy minibands manifest more and more fragmented nature of the transmittance with the change of system size. We claim that when a small perturbation is randomly present at a few number of sites or layers, the nature of electronic states will change and this can be understood by studying the electronic transmittance with the change of system size. We report the different critical states manifested in the size variation of the transmittance corresponding to the resonant energies for both perfect and imperfect cases through multifractal scaling study for few of these resonances.

  3. Efficient linear phase contrast in scanning transmission electron microscopy with matched illumination and detector interferometry

    SciTech Connect

    Ophus, Colin; Ciston, Jim; Pierce, Jordan; Harvey, Tyler R.; Chess, Jordan; McMorran, Benjamin J.; Czarnik, Cory; Rose, Harald H.; Ercius, Peter

    2016-02-29

    The ability to image light elements in soft matter at atomic resolution enables unprecedented insight into the structure and properties of molecular heterostructures and beam-sensitive nanomaterials. In this study, we introduce a scanning transmission electron microscopy technique combining a pre-specimen phase plate designed to produce a probe with structured phase with a high-speed direct electron detector to generate nearly linear contrast images with high efficiency. We demonstrate this method by using both experiment and simulation to simultaneously image the atomic-scale structure of weakly scattering amorphous carbon and strongly scattering gold nanoparticles. Our method demonstrates strong contrast for both materials, making it a promising candidate for structural determination of heterogeneous soft/hard matter samples even at low electron doses comparable to traditional phase-contrast transmission electron microscopy. Ultimately, simulated images demonstrate the extension of this technique to the challenging problem of structural determination of biological material at the surface of inorganic crystals.

  4. Efficient linear phase contrast in scanning transmission electron microscopy with matched illumination and detector interferometry.

    PubMed

    Ophus, Colin; Ciston, Jim; Pierce, Jordan; Harvey, Tyler R; Chess, Jordan; McMorran, Benjamin J; Czarnik, Cory; Rose, Harald H; Ercius, Peter

    2016-02-29

    The ability to image light elements in soft matter at atomic resolution enables unprecedented insight into the structure and properties of molecular heterostructures and beam-sensitive nanomaterials. In this study, we introduce a scanning transmission electron microscopy technique combining a pre-specimen phase plate designed to produce a probe with structured phase with a high-speed direct electron detector to generate nearly linear contrast images with high efficiency. We demonstrate this method by using both experiment and simulation to simultaneously image the atomic-scale structure of weakly scattering amorphous carbon and strongly scattering gold nanoparticles. Our method demonstrates strong contrast for both materials, making it a promising candidate for structural determination of heterogeneous soft/hard matter samples even at low electron doses comparable to traditional phase-contrast transmission electron microscopy. Simulated images demonstrate the extension of this technique to the challenging problem of structural determination of biological material at the surface of inorganic crystals.

  5. A toolkit for the characterization of CCD cameras for transmission electron microscopy.

    PubMed

    Vulovic, M; Rieger, B; van Vliet, L J; Koster, A J; Ravelli, R B G

    2010-01-01

    Charge-coupled devices (CCD) are nowadays commonly utilized in transmission electron microscopy (TEM) for applications in life sciences. Direct access to digitized images has revolutionized the use of electron microscopy, sparking developments such as automated collection of tomographic data, focal series, random conical tilt pairs and ultralarge single-particle data sets. Nevertheless, for ultrahigh-resolution work photographic plates are often still preferred. In the ideal case, the quality of the recorded image of a vitrified biological sample would solely be determined by the counting statistics of the limited electron dose the sample can withstand before beam-induced alterations dominate. Unfortunately, the image is degraded by the non-ideal point-spread function of the detector, as a result of a scintillator coupled by fibre optics to a CCD, and the addition of several inherent noise components. Different detector manufacturers provide different types of figures of merit when advertising the quality of their detector. It is hard for most laboratories to verify whether all of the anticipated specifications are met. In this report, a set of algorithms is presented to characterize on-axis slow-scan large-area CCD-based TEM detectors. These tools have been added to a publicly available image-processing toolbox for MATLAB. Three in-house CCD cameras were carefully characterized, yielding, among others, statistics for hot and bad pixels, the modulation transfer function, the conversion factor, the effective gain and the detective quantum efficiency. These statistics will aid data-collection strategy programs and provide prior information for quantitative imaging. The relative performance of the characterized detectors is discussed and a comparison is made with similar detectors that are used in the field of X-ray crystallography.

  6. Biological applications and transmission electron microscopy investigation of mesoporous silica nanoparticles

    NASA Astrophysics Data System (ADS)

    Trewyn, Brian G.

    endocytosis into HeLa cells. Not only does the material enter the cells through endocytosis, but it seems that fluorescein was released from the pores, most probably caused by disulfide bond reducing molecules, antioxidants. In addition to endocytosis and release, the Fe3O4-capped MSN propelled the cells across a cuvette upon induction of a magnet force. Finally, an important aspect of materials characterization is transmission electron microscopy. A TEM investigation demonstrated that incorporating different functional groups during the synthesis (co-condensation) changed the particle and pore morphologies.

  7. A transmission electron microscopy study of presolar spinel

    NASA Astrophysics Data System (ADS)

    Zega, Thomas J.; Nittler, Larry R.; Gyngard, Frank; Alexander, Conel M. O.'D.; Stroud, Rhonda M.; Zinner, Ernst K.

    2014-01-01

    We report on the isotopic and microstructural properties of four presolar spinel grains identified in acid-resistant residues of the Murray CM2 and Orgueil (ORG) CI1 chondrites, and a mixture of the unequilibrated ordinary chondrites (UOC) QUE 97008 (L3.05), WSG 95300 (H3.3), and MET00452 (LL3.05) collected in Antarctica. All four grains have O-isotopic compositions indicating an origin in low-mass (∼1.2-1.4 M⊙) O-rich asymptotic giant branch (AGB) stars, although two of the grains have compositions indicating that non-standard mixing (cool-bottom processing) likely occurred in their parent stars. Three of the grains are single-crystal Mg-Al-rich spinels containing minor Fe and Cr; one is Mg deficient and one contains minor Ca. The fourth consists of an assemblage of three, Fe-Cr-rich crystalline grains with closely aligned crystallographic orientation but systematically varied cation composition. Each spinel grain within the assemblage also contains Ti-rich sub-grains (<100 nm) whose lattice structures are coherent with their host crystals. Oxygen isotope measurements of the Orgueil residue identified four additional particles all with similar elemental and isotope composition. These are the first known presolar Fe-Cr-rich spinels. The isotopic and microstructural data indicate that the Al-Mg-rich and Fe-Cr-rich grains experienced different condensation and processing histories. The single-crystal, stoichiometric, nearly pure Mg-Al spinels are generally consistent with equilibrium condensation predictions, which constrain their condensation temperatures between 1161 and 1221 K, assuming total gas pressures of 1 × 10-6 and 1 × 10-3 atm, respectively. Minor stacking disorder is observed in one of the Mg-Al spinels and is probably a result of slight perturbations to crystal growth during condensation in the circumstellar environment or of impact-induced sheer strain as a response to grain-grain collisions, which could have occurred in the circumstellar

  8. Phase reconstruction in annular bright-field scanning transmission electron microscopy.

    PubMed

    Ishida, Takafumi; Kawasaki, Tadahiro; Tanji, Takayoshi; Kodama, Tetsuji; Matsutani, Takaomi; Ogai, Keiko; Ikuta, Takashi

    2015-04-01

    A novel technique for reconstructing the phase shifts of electron waves was applied to Cs-corrected scanning transmission electron microscopy (STEM). To realize this method, a new STEM system equipped with an annular aperture, annularly arrayed detectors and an arrayed image processor has been developed and evaluated in experiments. We show a reconstructed phase image of graphite particles and demonstrate that this new method works effectively for high-resolution phase imaging.

  9. Meat and bone meal and mineral feed additives may increase the risk of oral prion disease transmission

    USGS Publications Warehouse

    Johnson, Christopher J.; McKenzie, Debbie; Pedersen, Joel A.; Aiken, Judd M.

    2011-01-01

    Ingestion of prion-contaminated materials is postulated to be a primary route of prion disease transmission. Binding of prions to soil (micro)particles dramatically enhances peroral disease transmission relative to unbound prions, and it was hypothesized that micrometer-sized particles present in other consumed materials may affect prion disease transmission via the oral route of exposure. Small, insoluble particles are present in many substances, including soil, human foods, pharmaceuticals, and animal feeds. It is known that meat and bone meal (MBM), a feed additive believed responsible for the spread of bovine spongiform encephalopathy (BSE), contains particles smaller than 20 μm and that the pathogenic prion protein binds to MBM. The potentiation of disease transmission via the oral route by exposure to MBM or three micrometer-sized mineral feed additives was determined. Data showed that when the disease agent was bound to any of the tested materials, the penetrance of disease was increased compared to unbound prions. Our data suggest that in feed or other prion-contaminated substances consumed by animals or, potentially, humans, the addition of MBM or the presence of microparticles could heighten risks of prion disease acquisition.

  10. Meat and bone meal and mineral feed additives may increase the risk of oral prion disease transmission

    USGS Publications Warehouse

    Johnson, C.J.; McKenzie, D.; Pedersen, J.A.; Aiken, Judd M.

    2011-01-01

    Ingestion of prion-contaminated materials is postulated to be a primary route of prion disease transmission. Binding of prions to soil (micro)particles dramatically enhances peroral disease transmission relative to unbound prions, and it was hypothesized that micrometer-sized particles present in other consumed materials may affect prion disease transmission via the oral route of exposure. Small, insoluble particles are present in many substances, including soil, human foods, pharmaceuticals, and animal feeds. It is known that meat and bone meal (MBM), a feed additive believed responsible for the spread of bovine spongiform encephalopathy (BSE), contains particles smaller than 20 ??m and that the pathogenic prion protein binds to MBM. The potentiation of disease transmission via the oral route by exposure to MBM or three micrometer-sized mineral feed additives was determined. Data showed that when the disease agent was bound to any of the tested materials, the penetrance of disease was increased compared to unbound prions. Our data suggest that in feed or other prion-contaminated substances consumed by animals or, potentially, humans, the addition of MBM or the presence of microparticles could heighten risks of prion disease acquisition. Copyright ?? 2011 Taylor & Francis Group, LLC.

  11. MEAT AND BONE MEAL AND MINERAL FEED ADDITIVES MAY INCREASE THE RISK OF ORAL PRION DISEASE TRANSMISSION

    PubMed Central

    Johnson, Christopher J.; McKenzie, Debbie; Pedersen, Joel A.; Aiken, Judd M.

    2011-01-01

    Ingestion of prion-contaminated materials is postulated to be a primary route of prion disease transmission. Binding of prions to soil (micro)particles dramatically enhances peroral disease transmission relative to unbound prions, and it was hypothesized that micrometer–sized particles present in other consumed materials may affect prion disease transmission via the oral route of exposure. Small, insoluble particles are present in many substances, including soil, human foods, pharmaceuticals, and animal feeds. It is known that meat and bone meal (MBM), a feed additive believed responsible for the spread of bovine spongiform encephalopathy (BSE), contains particles smaller than 20 μm and that the pathogenic prion protein binds to MBM. The potentiation of disease transmission via the oral route by exposure to MBM or three micrometer-sized mineral feed additives was determined. Data showed that when the disease agent was bound to any of the tested materials, the penetrance of disease was increased compared to unbound prions. Our data suggest that in feed or other prion–contaminated substances consumed by animals or, potentially, humans, the addition of MBM or the presence of microparticles could heighten risks of prion disease acquisition. PMID:21218345

  12. Consecutive light microscopy, scanning-transmission electron microscopy and transmission electron microscopy of traumatic human brain oedema and ischaemic brain damage.

    PubMed

    Castejon, O J; Castejon, H V; Diaz, M; Castellano, A

    2001-10-01

    Cortical biopsies of 11 patients with traumatic brain oedema were consecutively studied by light microscopy (LM) using thick plastic sections, scanning-transmission electron microscopy ((S)TEM) using semithin plastic sections and transmission electron microscopy (TEM) using ultrathin sections. Samples were glutaraldehyde-osmium fixed and embedded in Araldite or Epon. Thick sections were stained with toluidine-blue for light microscopy. Semithin sections were examined unstained and uncoated for (S)TEM. Ultrathin sections were stained with uranyl and lead. Perivascular haemorrhages and perivascular extravasation of proteinaceous oedema fluid were observed in both moderate and severe oedema. Ischaemic pyramidal and non-pyramidal nerve cells appeared shrunken, electron dense and with enlargement of intracytoplasmic membrane compartment. Notably swollen astrocytes were observed in all samples examined. Glycogen-rich and glycogen-depleted astrocytes were identified in anoxic-ischaemic regions. Dark and hydropic satellite, interfascicular and perivascular oligodendrocytes were also found. The status spongiosus of severely oedematous brain parenchyma observed by LM and (S)TEM was correlated with the enlarged extracellular space and disrupted neuropil observed by TEM. The (S)TEM is recommended as a suitable technique for studying pathological processes in the central nervous system and as an informative adjunct to LM and TEM.

  13. Experimental determination of the transmission factor for the Omicron EA125 electron analyzer

    NASA Astrophysics Data System (ADS)

    Ruffieux, P.; Schwaller, P.; Gröning, O.; Schlapbach, L.; Gröning, P.; Herd, Q. C.; Funnemann, D.; Westermann, J.

    2000-10-01

    In this article a study of the transmission factor of the Omicron EA125 analyzer equipped with the universal lens is presented. The procedure is based on a model by Cross and Castle [J. Electron Spectrosc. Relat. Phenom. 22, 53 (1981)] and is applicable to every spectrometer which can be operated in the constant analyzer energy (CAE) and in the constant retarding ratio measuring mode. The advantage of the method is its independence on the sample and on the inelastic mean free path of the electrons. We find that the transmission factor for the CAE mode is proportional to Ekin-1 for most measuring setups. This dependence is predicted by theory for an ideal analyzer. Deviations from this behavior are observed if the retarding ratio for a given kinetic energy is too small. The limit value of the retarding ratio for ideal behavior, i.e., an Ekin-1 transmission factor, depends on the analyzer entrance slit aperture which has been selected.

  14. Interplay of electron heating and saturable absorption in ultrafast extreme ultraviolet transmission of condensed matter

    NASA Astrophysics Data System (ADS)

    Di Cicco, Andrea; Hatada, Keisuke; Giangrisostomi, Erika; Gunnella, Roberto; Bencivenga, Filippo; Principi, Emiliano; Masciovecchio, Claudio; Filipponi, Adriano

    2014-12-01

    High intensity pulses obtained by modern extreme ultraviolet (EUV) and x-ray photon sources allows the observation of peculiar phenomena in condensed matter. Experiments performed at the Fermi@Elettra FEL-1 free-electron-laser source at 23.7, 33.5, and 37.5 eV on Al thin films, for an intermediate-fluence range up to about 20 J /cm2, show evidence for a nonmonotonic EUV transmission trend. A decreasing transmission up to about 5 -10 J /cm2 is followed by an increase at higher fluence, associated with saturable absorption effects. The present findings are interpreted within a simplified three-channel model, showing that an account of the interplay between ultrafast electron heating and saturation effects is required to explain the observed transmission trend.

  15. 29 CFR 1926.1420 - Signals-radio, telephone or other electronic transmission of signals.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Signals-radio, telephone or other electronic transmission of signals. 1926.1420 Section 1926.1420 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... CONSTRUCTION Cranes and Derricks in Construction § 1926.1420 Signals—radio, telephone or other...

  16. 29 CFR 1926.1420 - Signals-radio, telephone or other electronic transmission of signals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Signals-radio, telephone or other electronic transmission of signals. 1926.1420 Section 1926.1420 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... CONSTRUCTION Cranes and Derricks in Construction § 1926.1420 Signals—radio, telephone or other...

  17. 29 CFR 1926.1420 - Signals-radio, telephone or other electronic transmission of signals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Signals-radio, telephone or other electronic transmission of signals. 1926.1420 Section 1926.1420 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... CONSTRUCTION Cranes and Derricks in Construction § 1926.1420 Signals—radio, telephone or other...

  18. 29 CFR 1926.1420 - Signals-radio, telephone or other electronic transmission of signals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Signals-radio, telephone or other electronic transmission of signals. 1926.1420 Section 1926.1420 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... CONSTRUCTION Cranes and Derricks in Construction § 1926.1420 Signals—radio, telephone or other...

  19. Method and apparatus for a high-resolution three dimensional confocal scanning transmission electron microscope

    DOEpatents

    de Jonge, Niels [Oak Ridge, TN

    2010-08-17

    A confocal scanning transmission electron microscope which includes an electron illumination device providing an incident electron beam propagating in a direction defining a propagation axis, and a precision specimen scanning stage positioned along the propagation axis and movable in at least one direction transverse to the propagation axis. The precision specimen scanning stage is configured for positioning a specimen relative to the incident electron beam. A projector lens receives a transmitted electron beam transmitted through at least part of the specimen and focuses this transmitted beam onto an image plane, where the transmitted beam results from the specimen being illuminated by the incident electron beam. A detection system is placed approximately in the image plane.

  20. Charged nanoparticle dynamics in water induced by scanning transmission electron microscopy.

    PubMed

    White, E R; Mecklenburg, Matthew; Shevitski, Brian; Singer, S B; Regan, B C

    2012-02-28

    Using scanning transmission electron microscopy we image ~4 nm platinum nanoparticles deposited on an insulating membrane, where the membrane is one of two electron-transparent windows separating an aqueous environment from the microscope's high vacuum. Upon receiving a relatively moderate dose of ~10(4) e/nm(2), initially immobile nanoparticles begin to move along trajectories that are directed radially outward from the center of the field of view. With larger dose rates the particle motion becomes increasingly dramatic. These observations demonstrate that, even under mild imaging conditions, the in situ electron microscopy of aqueous environments can produce electrophoretic charging effects that dominate the dynamics of nanoparticles under observation.

  1. High-pressure freezing for scanning transmission electron tomography analysis of cellular organelles.

    PubMed

    Walther, Paul; Schmid, Eberhard; Höhn, Katharina

    2013-01-01

    Using an electron microscope's scanning transmission mode (STEM) for collection of tomographic datasets is advantageous compared to bright field transmission electron microscopic (TEM). For image formation, inelastic scattering does not cause chromatic aberration, since in STEM mode no image forming lenses are used after the beam has passed the sample, in contrast to regular TEM. Therefore, thicker samples can be imaged. It has been experimentally demonstrated that STEM is superior to TEM and energy filtered TEM for tomography of samples as thick as 1 μm. Even when using the best electron microscope, adequate sample preparation is the key for interpretable results. We adapted protocols for high-pressure freezing of cultivated cells from a physiological state. In this chapter, we describe optimized high-pressure freezing and freeze substitution protocols for STEM tomography in order to obtain high membrane contrast.

  2. Transmission electron microscopic method for gene mapping on polytene chromosomes by in situ hybridization.

    PubMed

    Wu, M; Davidson, N

    1981-11-01

    A transmission electron microscope method for gene mapping by in situ hybridization to Drosophila polytene chromosomes has been developed. As electron-opaque labels, we use colloidal gold spheres having a diameter of 25 nm. The spheres are coated with a layer of protein to which Escherichia coli single-stranded DNA is photochemically crosslinked. Poly(dT) tails are added to the 3' OH ends of these DNA strands, and poly(dA) tails are added to the 3' OH ends of a fragmented cloned Drosophila DNA. These probe--dA strands are hybridized in situ to polytene chromosome squashes. Gold spheres are linked to the hybridized probe--dA strands by A.T base pairing. The sphere positions relative to the chromosome bands can be observed by transmission electron microscopy. The method shows low background and high resolution.

  3. Investigating the mesostructure of ordered porous silica nanocomposites by transmission electron microscopy techniques

    SciTech Connect

    Bullita, S.; Casula, M. F.; Piludu, M.; Falqui, A.; Carta, D.; Corrias, A.

    2014-10-21

    Nanocomposites made out of FeCo alloy nanocrystals supported onto pre-formed mesoporous ordered silica which features a cubic arrangement of pores (SBA-16) were investigated. Information on the effect of the nanocrystals on the mesostructure (i.e. pore arrangement symmetry, pore size, and shape) were deduced by a multitechnique approach including N2 physisorption, low angle X-ray diffraction, and Transmission electron microscopy. It is shown that advanced transmission electron microscopy techniques are required, however, to gain direct evidence on key compositional and textural features of the nanocomposites. In particular, electron tomography and microtomy techniques make clear that the FeCo nanocrystals are located within the pores of the SBA-16 silica, and that the ordered mesostructure of the nanocomposite is retained throughout the observed specimen.

  4. Correlative fluorescence microscopy and scanning transmission electron microscopy of quantum-dot-labeled proteins in whole cells in liquid.

    PubMed

    Dukes, Madeline J; Peckys, Diana B; de Jonge, Niels

    2010-07-27

    Correlative fluorescence microscopy and transmission electron microscopy (TEM) is a state-of-the-art microscopy methodology to study cellular function, combining the functionality of light microscopy with the high resolution of electron microscopy. However, this technique involves complex sample preparation procedures due to its need for either thin sections or frozen samples for TEM imaging. Here, we introduce a novel correlative approach capable of imaging whole eukaryotic cells in liquid with fluorescence microscopy and with scanning transmission electron microscopy (STEM); there is no additional sample preparation necessary for the electron microscopy. Quantum dots (QDs) were bound to epidermal growth factor (EGF) receptors of COS7 fibroblast cells. Fixed whole cells in saline water were imaged with fluorescence microscopy and subsequently with STEM. The STEM images were correlated with fluorescence images of the same cellular regions. QDs of dimensions 7x12 nm were visible in a 5 microm thick layer of saline water, consistent with calculations. A spatial resolution of 3 nm was achieved on the QDs.

  5. Correlative Fluorescence Microscopy and Scanning Transmission Electron Microscopy of Quantum Dot Labeled Proteins in Whole Cells in Liquid

    PubMed Central

    Dukes, Madeline J.; Peckys, Diana B.; de Jonge, Niels

    2010-01-01

    Correlative fluorescence microscopy and transmission electron microscopy (TEM) is a state-of-the-art microscopy methodology to study cellular function, combining the functionality of light microscopy with the high resolution of electron microscopy. However, this technique involves complex sample preparation procedures due to its need for either thin sections or frozen samples for TEM imaging. Here, we introduce a novel correlative approach capable of imaging whole eukaryotic cells in liquid with fluorescence microscopy and with scanning transmission electron microscopy (STEM); there is no additional sample preparation necessary for the electron microscopy. Quantum dots (QDs) were bound to epidermal growth factor (EGF) receptors of COS7 fibroblast cells. Fixed whole cells in saline water were imaged with fluorescence microscopy and subsequently with STEM. The STEM images were correlated with fluorescence images of the same cellular regions. QDs of dimensions 7 × 12 nm were visible in a 5 μm thick layer of saline water, consistent with calculations. A spatial resolution of 3 nm was achieved on the QDs. PMID:20550177

  6. Ultrastructure of the Odontocete organ of Corti: scanning and transmission electron microscopy.

    PubMed

    Morell, Maria; Lenoir, Marc; Shadwick, Robert E; Jauniaux, Thierry; Dabin, Willy; Begeman, Lineke; Ferreira, Marisa; Maestre, Iranzu; Degollada, Eduard; Hernandez-Milian, Gema; Cazevieille, Chantal; Fortuño, José-Manuel; Vogl, Wayne; Puel, Jean-Luc; André, Michel

    2015-02-15

    The morphological study of the Odontocete organ of Corti, together with possible alterations associated with damage from sound exposure, represents a key conservation approach to assess the effects of acoustic pollution on marine ecosystems. By collaborating with stranding networks from several European countries, 150 ears from 13 species of Odontocetes were collected and analyzed by scanning (SEM) and transmission (TEM) electron microscopy. Based on our analyses, we first describe and compare Odontocete cochlear structures and then propose a diagnostic method to identify inner ear alterations in stranded individuals. The two species analyzed by TEM (Phocoena phocoena and Stenella coeruleoalba) showed morphological characteristics in the lower basal turn of high-frequency hearing species. Among other striking features, outer hair cell bodies were extremely small and were strongly attached to Deiters cells. Such morphological characteristics, shared with horseshoe bats, suggest that there has been convergent evolution of sound reception mechanisms among echolocating species. Despite possible autolytic artifacts due to technical and experimental constraints, the SEM analysis allowed us to detect the presence of scarring processes resulting from the disappearance of outer hair cells from the epithelium. In addition, in contrast to the rapid decomposition process of the sensory epithelium after death (especially of the inner hair cells), the tectorial membrane appeared to be more resistant to postmortem autolysis effects. Analysis of the stereocilia imprint pattern at the undersurface of the tectorial membrane may provide a way to detect possible ultrastructural alterations of the hair cell stereocilia by mirroring them on the tectorial membrane.

  7. Perspectives on low voltage transmission electron microscopy as applied to cell biology.

    PubMed

    Bendayan, Moise; Paransky, Eugene

    2014-12-01

    Low voltage transmission electron microscopy (LVTEM) with accelerating voltages as low as 5 kV was applied to cell biology. To take advantage of the increased contrast given by LVTEM, tissue preparation was modified omitting all heavy metals such as osmium, uranium, and lead from the fixation, on block staining and counterstaining. Nonstained ultra-thin tissue sections (40 nm thick) generated highly contrasted images. While the aspect of the cells remains similar to that obtained by conventional TEM, some new substructures were revealed. The pancreatic acinar cells granules present a heterogeneous matrix with partitions corresponding to segregation of their different secretory proteins. Microvilli display their core of microfilaments anchored to the dense top membrane. Mitochondria revealed the presence of distinct particles along their cristea membranes that may correspond to the ATP synthase complexes or oxysomes. The dense nuclear chromatin displays a honey-comb appearance while distinct beads aligned along thin threads were seen in the dispersed chromatin. These new features revealed by LVTEM correlate with structures described or predicted through other approaches. Masking effects due to thickness of the tissue sections and to the presence of heavy metals must have prevented their observation by conventional TEM. Furthermore, the immunogold was adapted to LVTEM revealing nuclear lamin-A at the edge of the dense chromatin ribbons. Combining cytochemistry with LVTEM brings additional advantages to this new approach in cell biology.

  8. Additive effects of electronic and nuclear energy loss in irradiation-induced amorphization of zircon

    DOE PAGES

    Zarkadoula, Eva; Toulemonde, Marcel; Weber, William J.

    2015-12-29

    We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. As a result, we found that taking the electronic energy loss out as a frictionmore » term results in reduced damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.« less

  9. Additive effects of electronic and nuclear energy loss in irradiation-induced amorphization of zircon

    SciTech Connect

    Zarkadoula, Eva; Toulemonde, Marcel; Weber, William J.

    2015-12-29

    We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. As a result, we found that taking the electronic energy loss out as a friction term results in reduced damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.

  10. Additive effects of electronic and nuclear energy losses in irradiation-induced amorphization of zircon

    SciTech Connect

    Zarkadoula, Eva; Toulemonde, Marcel; Weber, William J.

    2015-12-28

    We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. We found that taking the electronic energy loss out as a friction term results in reduced damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.

  11. Formation and nonlinear dynamics of the squeezed state of a helical electron beam with additional deceleration

    SciTech Connect

    Egorov, E. N. Koronovskii, A. A.; Kurkin, S. A.; Hramov, A. E.

    2013-11-15

    Results of numerical simulations and analysis of the formation and nonlinear dynamics of the squeezed state of a helical electron beam in a vircator with a magnetron injection gun as an electron source and with additional electron deceleration are presented. The ranges of control parameters where the squeezed state can form in such a system are revealed, and specific features of the system dynamics are analyzed. It is shown that the formation of a squeezed state of a nonrelativistic helical electron beam in a system with electron deceleration is accompanied by low-frequency longitudinal dynamics of the space charge.

  12. In Situ Observation of Carbonaceous Material in the Matrices of CV and CM Carbonaceous Chondrites: Preliminary Results from Energy Filtered Transmission Electron Microscopy

    NASA Technical Reports Server (NTRS)

    Brearley, A. J.; Abreu, N. M.

    2001-01-01

    Energy filtered transmission electron microscopy shows that organic matter can be detected in situ in the matrices of carbonaceous chondrites at a spatial resolution of at least 1 nm. In CM chondrites, carbon is often associated with sulfide particles. Additional information is contained in the original extended abstract.

  13. Large-scale Scanning Transmission Electron Microscopy (Nanotomy) of Healthy and Injured Zebrafish Brain

    PubMed Central

    Kuipers, Jeroen; Kalicharan, Ruby D.; Wolters, Anouk H. G.

    2016-01-01

    Large-scale 2D electron microscopy (EM), or nanotomy, is the tissue-wide application of nanoscale resolution electron microscopy. Others and we previously applied large scale EM to human skin pancreatic islets, tissue culture and whole zebrafish larvae1-7. Here we describe a universally applicable method for tissue-scale scanning EM for unbiased detection of sub-cellular and molecular features. Nanotomy was applied to investigate the healthy and a neurodegenerative zebrafish brain. Our method is based on standardized EM sample preparation protocols: Fixation with glutaraldehyde and osmium, followed by epoxy-resin embedding, ultrathin sectioning and mounting of ultrathin-sections on one-hole grids, followed by post staining with uranyl and lead. Large-scale 2D EM mosaic images are acquired using a scanning EM connected to an external large area scan generator using scanning transmission EM (STEM). Large scale EM images are typically ~ 5 - 50 G pixels in size, and best viewed using zoomable HTML files, which can be opened in any web browser, similar to online geographical HTML maps. This method can be applied to (human) tissue, cross sections of whole animals as well as tissue culture1-5. Here, zebrafish brains were analyzed in a non-invasive neuronal ablation model. We visualize within a single dataset tissue, cellular and subcellular changes which can be quantified in various cell types including neurons and microglia, the brain's macrophages. In addition, nanotomy facilitates the correlation of EM with light microscopy (CLEM)8 on the same tissue, as large surface areas previously imaged using fluorescent microscopy, can subsequently be subjected to large area EM, resulting in the nano-anatomy (nanotomy) of tissues. In all, nanotomy allows unbiased detection of features at EM level in a tissue-wide quantifiable manner. PMID:27285162

  14. Large-scale Scanning Transmission Electron Microscopy (Nanotomy) of Healthy and Injured Zebrafish Brain.

    PubMed

    Kuipers, Jeroen; Kalicharan, Ruby D; Wolters, Anouk H G; van Ham, Tjakko J; Giepmans, Ben N G

    2016-05-25

    Large-scale 2D electron microscopy (EM), or nanotomy, is the tissue-wide application of nanoscale resolution electron microscopy. Others and we previously applied large scale EM to human skin pancreatic islets, tissue culture and whole zebrafish larvae(1-7). Here we describe a universally applicable method for tissue-scale scanning EM for unbiased detection of sub-cellular and molecular features. Nanotomy was applied to investigate the healthy and a neurodegenerative zebrafish brain. Our method is based on standardized EM sample preparation protocols: Fixation with glutaraldehyde and osmium, followed by epoxy-resin embedding, ultrathin sectioning and mounting of ultrathin-sections on one-hole grids, followed by post staining with uranyl and lead. Large-scale 2D EM mosaic images are acquired using a scanning EM connected to an external large area scan generator using scanning transmission EM (STEM). Large scale EM images are typically ~ 5 - 50 G pixels in size, and best viewed using zoomable HTML files, which can be opened in any web browser, similar to online geographical HTML maps. This method can be applied to (human) tissue, cross sections of whole animals as well as tissue culture(1-5). Here, zebrafish brains were analyzed in a non-invasive neuronal ablation model. We visualize within a single dataset tissue, cellular and subcellular changes which can be quantified in various cell types including neurons and microglia, the brain's macrophages. In addition, nanotomy facilitates the correlation of EM with light microscopy (CLEM)(8) on the same tissue, as large surface areas previously imaged using fluorescent microscopy, can subsequently be subjected to large area EM, resulting in the nano-anatomy (nanotomy) of tissues. In all, nanotomy allows unbiased detection of features at EM level in a tissue-wide quantifiable manner.

  15. Additional heritable virus in the parasitic wasp Leptopilina boulardi: prevalence, transmission and phenotypic effects.

    PubMed

    Martinez, Julien; Lepetit, David; Ravallec, Marc; Fleury, Frédéric; Varaldi, Julien

    2016-02-01

    Parasitoid wasps can be found in association with heritable viruses. Although some viruses have been shown to profoundly affect the biology and evolution of parasitoid wasps, the genetic and phenotypic diversity of parasitoid-associated viruses remains largely unexplored. We previously discovered a behaviour-manipulating DNA virus in the parasitoid wasp Leptopilina boulardi. In this species, which lays its eggs inside Drosophila larvae, Leptopilina boulardi filamentous virus (LbFV) forces the females to lay their eggs in already parasitized Drosophila larvae. This behavioural manipulation increases the chances for the horizontal transmission of the virus. Here, we describe in the same parasitoid species another virus, which we propose to call Leptopilina boulardi toti-like virus (LbTV). This double-stranded RNA virus is highly prevalent in insect laboratory lines as well as in parasitoids caught in the field. In some cases, LbTV was found in coinfection with LbFV, but did not affect the behaviour of the wasp. Instead we found that the presence of LbTV correlates with an increase in the number of offspring, mostly due to increased survival of parasitoid larvae. LbTV is vertically transmitted mostly through the maternal lineage even if frequent paternal transmission also occurs. Unlike LbFV, LbTV is not horizontally transmitted. Its genome encodes a putative RNA-dependent RNA polymerase (RdRp) showing similarities with RdRps of Totiviridae. These results underline the high incidence and diversity of inherited viruses in parasitoids as well as their potential impact on the phenotype of their hosts.

  16. Ghost transmission: How large basis sets can make electron transport calculations worse

    SciTech Connect

    Herrmann, Carmen; Solomon, Gemma C.; Subotnik, Joseph E.; Mujica, Vladimiro; Ratner, Mark A.

    2010-01-01

    The Landauer approach has proven to be an invaluable tool for calculating the electron transport properties of single molecules, especially when combined with a nonequilibrium Green’s function approach and Kohn–Sham density functional theory. However, when using large nonorthogonal atom-centered basis sets, such as those common in quantum chemistry, one can find erroneous results if the Landauer approach is applied blindly. In fact, basis sets of triple-zeta quality or higher sometimes result in an artificially high transmission and possibly even qualitatively wrong conclusions regarding chemical trends. In these cases, transport persists when molecular atoms are replaced by basis functions alone (“ghost atoms”). The occurrence of such ghost transmission is correlated with low-energy virtual molecular orbitals of the central subsystem and may be interpreted as a biased and thus inaccurate description of vacuum transmission. An approximate practical correction scheme is to calculate the ghost transmission and subtract it from the full transmission. As a further consequence of this study, it is recommended that sensitive molecules be used for parameter studies, in particular those whose transmission functions show antiresonance features such as benzene-based systems connected to the electrodes in meta positions and other low-conducting systems such as alkanes and silanes.

  17. Spin-dependent electron transmission through bacteriorhodopsin embedded in purple membrane

    PubMed Central

    Mishra, Debabrata; Markus, Tal Z.; Naaman, Ron; Kettner, Matthias; Göhler, Benjamin; Zacharias, Helmut; Friedman, Noga; Sheves, Mordechai; Fontanesi, Claudio

    2013-01-01

    Spin-dependent photoelectron transmission and spin-dependent electrochemical studies were conducted on purple membrane containing bacteriorhodopsin (bR) deposited on gold, aluminum/aluminum-oxide, and nickel substrates. The result indicates spin selectivity in electron transmission through the membrane. Although the chiral bR occupies only about 10% of the volume of the membrane, the spin polarization found is on the order of 15%. The electrochemical studies indicate a strong dependence of the conduction on the protein’s structure. Denaturation of the protein causes a sharp drop in the conduction through the membrane. PMID:23980184

  18. Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits

    NASA Astrophysics Data System (ADS)

    Behrens, B.-A.; Bonk, C.; Grbic, N.; Vucetic, M.

    2017-02-01

    By sheet metal forming processes the forming limits and part characteristics are defined through the process specific loads. In deep drawing processes the maximum deep draw ratios as well as the springback behaviour of the metal parts are depending on the stress distribution in the part material during the forming process. While exceeding the load limits, a failure in the material occurs, which can be avoided by additional force transmission activated in the deep drawing process before the forming limit of material is achieved. This contribution deals with numerical investigation of process effect caused by additional force transmission regarding the extension of the process limits. Here, the steel material HCT 600X+Z (1.0941) in thickness s 0 = 1.0 mm is analyzed numerically using the anisotropic model Hill48. This model is validated by the means of cup test by Swift. Both, the FEA of conventional and forming process with additional force transmission are carried out. The numerical results are compared with reference geometry of rectangle cup.

  19. 31 CFR 363.18 - Is Public Debt liable if the electronic transmission of my data is intercepted?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Securities Held in TreasuryDirect § 363.18 Is Public Debt liable if the electronic transmission of my data is... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Is Public Debt liable if the electronic transmission of my data is intercepted? 363.18 Section 363.18 Money and Finance:...

  20. Ion acceleration enhanced by additional neutralizing electrons in a magnetically expanding double layer plasma

    SciTech Connect

    Takahashi, Kazunori; Fujiwara, Tamiya

    2010-10-15

    Electrons neutralizing an ion beam are additionally supplied to a magnetically expanding double layer (DL) plasma from the downstream side of the DL. The rf power and the argon gas pressure are maintained at 200 W and 55 mPa, respectively, and the source magnetic field is varied in the range of about 70-550 G. It is observed that the ion beam energy corresponding to the DL potential drop increases up to 30 eV with an increase in the magnetic field when supplying the additional electrons, while it saturates at 20 eV for the case of the absence of the additional electrons. The supplied electrons are believed to be an energy source for the DL such that increasing the magnetic field is able to increase the potential drop beyond the limit found in the absence of the supplied electrons.

  1. An in-situ analytical scanning and transmission electron microscopy investigation of structure-property relationships in electronic materials

    NASA Astrophysics Data System (ADS)

    Wagner, Andrew James

    As electronic and mechanical devices are scaled downward in size and upward in complexity, macroscopic principles no longer apply. Synthesis of three-dimensionally confined structures exhibit quantum confinement effects allowing, for example, silicon nanoparticles to luminesce. The reduction in size of classically brittle materials reveals a ductile-to-brittle transition. Such a transition, attributed to a reduction in defects, increases elasticity. In the case of silicon, elastic deformation can improve electronic carrier mobility by over 50%, a vital attribute of modern integrated circuits. The scalability of such principles and the changing atomistic processes which contribute to them presents a vitally important field of research. Beginning with the direct observation of dislocations and lattice planes in the 1950s, the transmission electron microscope has been a powerful tool in materials science. More recently, as nanoscale technologies have proliferated modern life, their unique ability to spatially resolve nano- and atomic-scale structures has become a critical component of materials research and characterization. Signals produced by an incident beam of high-energy electrons enables researchers to both image and chemically analyze materials at the atomic scale. Coherently and elastically-scattered electrons can be collected to produce atomic-scale images of a crystalline sample. New specimen stages have enabled routine investigation of samples heated up to 1000 °C and cooled to liquid nitrogen temperatures. MEMS-based transducers allow for sub-nm scale mechanical testing and ultrathin membranes allow study of liquids and gases. Investigation of a myriad of previously "unseeable" processes can now be observed within the TEM, and sometimes something new is found within the old. High-temperature annealing of pure a Si:H films leads to crystallization of the film. Such films provide higher carrier mobility compared to amorphous films, offering improved

  2. A scanning and transmission electron microscopic analysis of the cerebral aqueduct in the rabbit.

    PubMed

    Meller, S T; Dennis, B J

    1993-09-01

    An examination of the surface of the cerebral aqueduct with the scanning electron microscope revealed that the walls of the cerebral aqueduct were so heavily ciliated that most of the ependymal surface was obscured, yet certain specialized supraependymal structures could be discerned lying on (or embedded within) this matt of cilia. These structures were determined by transmission electron microscopy and Golgi analysis to be either macrophages, supraependymal neurons, dendrites from medial periaqueductal gray neurons, or axons of unknown origin. Some axons, which were found to contain vesicles, appeared to make synaptic contacts with ependymal cells. Using the transmission electron microscope, the ependymal lining was found to consist of two different cell types: normal ependymal cells and tanycytes which have a long tapering basal process that was observed to contact blood vessels or, more rarely, seemed to terminate in relation to neuronal elements. While there have been previous reports on the structure of the third and lateral ventricles in other species, there are limited reports in the rabbit. The present report is not only the first description for the rabbit, but it is the first complete scanning and transmission electron microscopic analysis of the cerebral aqueduct in any species.

  3. In-situ straining and time-resolved electron tomography data acquisition in a transmission electron microscope.

    PubMed

    Hata, S; Miyazaki, S; Gondo, T; Kawamoto, K; Horii, N; Sato, K; Furukawa, H; Kudo, H; Miyazaki, H; Murayama, M

    2016-12-18

    This paper reports the preliminary results of a new in-situ three-dimensional (3D) imaging system for observing plastic deformation behavior in a transmission electron microscope (TEM) as a directly relevant development of the recently reported straining-and-tomography holder [Sato K et al (2015) Development of a novel straining holder for transmission electron microscopy compatible with single tilt-axis electron tomography. Microsc. 64: 369-375]. We designed an integrated system using the holder and newly developed straining and image-acquisition software and then developed an experimental procedure for in-situ straining and time-resolved electron tomography (ET) data acquisition. The software for image acquisition and 3D visualization was developed based on the commercially available ET software TEMography(TM) We achieved time-resolved 3D visualization of nanometer-scale plastic deformation behavior in a Pb-Sn alloy sample, thus demonstrating the capability of this system for potential applications in materials science.

  4. Benchmarking the performance of density functional theory based Green's function formalism utilizing different self-energy models in calculating electronic transmission through molecular systems.

    PubMed

    Prociuk, Alexander; Van Kuiken, Ben; Dunietz, Barry D

    2006-11-28

    Electronic transmission through a metal-molecule-metal system is calculated by employing a Green's function formalism in the scattering based scheme. Self-energy models representing the bulk and the potential bias are used to describe electron transport through the molecular system. Different self-energies can be defined by varying the partition between device and bulk regions of the metal-molecule-metal model system. In addition, the self-energies are calculated with different representations of the bulk through its Green's function. In this work, the dependence of the calculated transmission on varying the self-energy subspaces is benchmarked. The calculated transmission is monitored with respect to the different choices defining the self-energy model. In this report, we focus on one-dimensional model systems with electronic structures calculated at the density functional level of theory.

  5. Synergy between transmission electron microscopy and powder diffraction: application to modulated structures.

    PubMed

    Batuk, Dmitry; Batuk, Maria; Abakumov, Artem M; Hadermann, Joke

    2015-04-01

    The crystal structure solution of modulated compounds is often very challenging, even using the well established methodology of single-crystal X-ray crystallography. This task becomes even more difficult for materials that cannot be prepared in a single-crystal form, so that only polycrystalline powders are available. This paper illustrates that the combined application of transmission electron microscopy (TEM) and powder diffraction is a possible solution to the problem. Using examples of anion-deficient perovskites modulated by periodic crystallographic shear planes, it is demonstrated what kind of local structural information can be obtained using various TEM techniques and how this information can be implemented in the crystal structure refinement against the powder diffraction data. The following TEM methods are discussed: electron diffraction (selected area electron diffraction, precession electron diffraction), imaging (conventional high-resolution TEM imaging, high-angle annular dark-field and annular bright-field scanning transmission electron microscopy) and state-of-the-art spectroscopic techniques (atomic resolution mapping using energy-dispersive X-ray analysis and electron energy loss spectroscopy).

  6. High Speed, Radiation Hard CMOS Pixel Sensors for Transmission Electron Microscopy

    NASA Astrophysics Data System (ADS)

    Contarato, Devis; Denes, Peter; Doering, Dionisio; Joseph, John; Krieger, Brad

    CMOS monolithic active pixel sensors are currently being established as the technology of choice for new generation digital imaging systems in Transmission Electron Microscopy (TEM). A careful sensor design that couples μm-level pixel pitches with high frame rate readout and radiation hardness to very high electron doses enables the fabrication of direct electron detectors that are quickly revolutionizing high-resolution TEM imaging in material science and molecular biology. This paper will review the principal characteristics of this novel technology and its advantages over conventional, optically-coupled cameras, and retrace the sensor development driven by the Transmission Electron Aberration corrected Microscope (TEAM) project at the LBNL National Center for Electron Microscopy (NCEM), illustrating in particular the imaging capabilities enabled by single electron detection at high frame rate. Further, the presentation will report on the translation of the TEAM technology to a finer feature size process, resulting in a sensor with higher spatial resolution and superior radiation tolerance currently serving as the baseline for a commercial camera system.

  7. Investigating the use of in situ liquid cell scanning transmission electron microscopy to explore DNA-mediated gold nanoparticle growth

    NASA Astrophysics Data System (ADS)

    Nguy, Amanda

    Engineering nanoparticles with desired shape-dependent properties is the key to many applications in nanotechnology. Although many synthetic procedures exist to produce anisotropic gold nanoparticles, the dynamics of growth are typically unknown or hypothetical. In the case of seed-mediated growth in the presence of DNA into anisotropic nanoparticles, it is not known exactly how DNA directs growth into specific morphologies. A series of preliminary experiments were carried out to contribute to the investigation of the possible mechanism of DNA-mediated growth of gold nanoprisms into gold nanostars using liquid cell scanning transmission electron microscopy (STEM). Imaging in the liquid phase was achieved through the use of a liquid cell platform and liquid cell holder that allow the sample to be contained within a “chip sandwich” between two electron transparent windows. Ex situ growth experiments were performed using Au-T30 NPrisms (30-base thymine oligonucleotide-coated gold nanoprisms) that are expected to grow into gold nanostars. Growth to form these nanostars were imaged using TEM (transmission electron microscopy) and liquid cell STEM (scanning transmission electron microscopy). An attempt to perform in situ growth experiments with the same Au-T30 nanoprisms revealed challenges in obtaining desired morphology results due to the environmental differences within the liquid cell compared to the ex situ environment. Different parameters in the experimental method were explored including fluid line set up, simultaneous and alternating reagent addition, and the effect of different liquid cell volumes to ensure adequate flow of reagents into the liquid cell. Lastly, the binding affinities were compared for T30 and A30 DNA incubated with gold nanoparticles using zeta potential measurements, absorption spectroscopy, and isothermal titration calorimetry (ITC). It was previously reported thymine bases have a lower binding affinity to gold surfaces than

  8. Manual shift control lever device and self-contained electronic control for transmissions

    SciTech Connect

    Parker, F.F.

    1986-09-09

    A unitized shift control lever device is described for the remote activation of an electrically controlled transmission comprising: a housing; a manually operable range selector lever pivotally supported in the housing for selective movements to predetermined operating positions respectively indicative of a required operating condition of an associated electrically controlled transmission; means in the housing providing a source of radiations; radiation controlled switching means for generating discrete control signals in response to the presence and non-presence of the radiations; means interposed in the radiation path between the source and the switching means operable in response to the movement of the range selector lever for selectively determining the presence or non-presence of the radiations with respect to the switching means at each range selector position of the lever; and electronic circuit control means having input connections for receiving the generated signals and output connections adapted for connection with electrically activated condition controlling devices on the transmission.

  9. Implementation of subcellular water mapping by electron energy loss spectroscopy in a medium-voltage scanning transmission electron microscope.

    PubMed

    Terryn, C; Michel, J; Thomas, X; Laurent-Maquin, D; Balossier, G

    2004-07-01

    The water concentration in biological cells plays a predominant role in cellular life. Using electron energy loss spectroscopy, the feasibility to measure the water content in cells has already been demonstrated. In this paper, we present an upgrade of water measurement in hydrated cryosections by spectrum imaging mode in a medium-voltage scanning transmission electron microscope. The electron energy loss spectra are recorded in spectrum imaging mode in a 2(n)x2(n) pixels array. Each spectrum is processed in order to determine the water mass content in the corresponding pixel. Then a parametric image is obtained in which grey levels are related to water concentration. In this image, it is possible to recognize the different subcellular compartments. By averaging the water concentration over the relevant pixels, we can determine the water mass content in the concerned subcellular compartment. As an example, we present water mass content measurement at subcellular level in rat hepatocytes.

  10. In situ Transmission Electron Microscopy Investigation of the Structural Changes in Carbon Nanotubes During Electron Emission at High Currents

    SciTech Connect

    Doytcheva, Maya; Kaiser, Monja; De Jonge, Niels

    2006-01-01

    The structural changes in carbon nanotubes under electron emission conditions were investigated in situ in a transmission electron microscope (TEM). The measurements were performed on individually mounted free-standing multi-walled carbon nanotubes (CNTs). It was found that the structure of the carbon nanotubes did not change gradually, as is the case with field emission electron sources made of sharp metal tips. Instead, changes occurred only above a current level of a few microamperes, which was different for each nanotube. Above the threshold current, carbon nanotubes underwent either structural damage, such as shortening and splitting of the apex of the nanotube, or closing of their open cap. The results are discussed on the basis of several models for degradation mechanisms.

  11. High-energy-resolution monochromator for aberration-corrected scanning transmission electron microscopy/electron energy-loss spectroscopy.

    PubMed

    Krivanek, Ondrej L; Ursin, Jonathan P; Bacon, Neil J; Corbin, George J; Dellby, Niklas; Hrncirik, Petr; Murfitt, Matthew F; Own, Christopher S; Szilagyi, Zoltan S

    2009-09-28

    An all-magnetic monochromator/spectrometer system for sub-30 meV energy-resolution electron energy-loss spectroscopy in the scanning transmission electron microscope is described. It will link the energy being selected by the monochromator to the energy being analysed by the spectrometer, without resorting to decelerating the electron beam. This will allow it to attain spectral energy stability comparable to systems using monochromators and spectrometers that are raised to near the high voltage of the instrument. It will also be able to correct the chromatic aberration of the probe-forming column. It should be able to provide variable energy resolution down to approximately 10 meV and spatial resolution less than 1 A.

  12. Morphological characteristics of monosodium urate: a transmission electron microscopic study of intact natural and synthetic crystals.

    PubMed

    Paul, H; Reginato, A J; Schumacher, H R

    1983-02-01

    Transmission electron microscopic studies of synthetic and natural monosodium urate crystals dried on formvar coated grids showed identical internal structures in all crystals. At higher magnification the crystals' surface showed angular or wavy irregularities, and more rarely some crystals appeared to have other tiny crystals on the surface. Protein-like surface coating was not observed except in crystals from one asymptomatic patient in whom synovial fluid was loaded with monosodium urate crystals, but no inflammatory cells were present. Heated synthetic monosodium urate crystals retained the ultrastructural characteristics in their interior but they lost their needle or rod-like shape. Transmission electron microscopic study of monosodium urate crystals dried on formvar coated grids provides a quick method of investigating crystal ultrastructure.

  13. Morphological characteristics of monosodium urate: a transmission electron microscopic study of intact natural and synthetic crystals.

    PubMed Central

    Paul, H; Reginato, A J; Schumacher, H R

    1983-01-01

    Transmission electron microscopic studies of synthetic and natural monosodium urate crystals dried on formvar coated grids showed identical internal structures in all crystals. At higher magnification the crystals' surface showed angular or wavy irregularities, and more rarely some crystals appeared to have other tiny crystals on the surface. Protein-like surface coating was not observed except in crystals from one asymptomatic patient in whom synovial fluid was loaded with monosodium urate crystals, but no inflammatory cells were present. Heated synthetic monosodium urate crystals retained the ultrastructural characteristics in their interior but they lost their needle or rod-like shape. Transmission electron microscopic study of monosodium urate crystals dried on formvar coated grids provides a quick method of investigating crystal ultrastructure. Images PMID:6830327

  14. Recent developments of the in situ wet cell technology for transmission electron microscopies

    NASA Astrophysics Data System (ADS)

    Chen, Xin; Li, Chang; Cao, Hongling

    2015-03-01

    In situ wet cells for transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) allow studying structures and processes in a liquid environment with high temporal and spatial resolutions, and have been attracting increasing research interests in many fields. In this review, we highlight the structural and functional developments of the wet cells for TEM and STEM. One of the key features of the wet cells is the sealing technique used to isolate the liquid sample from the TEM/STEM vacuum environments, thus the existing in situ wet cells are grouped by different sealing methods. In this study, the advantages and shortcomings of each type of in situ wet cells are discussed, the functional developments of different wet cells are presented, and the future trends of the wet cell technology are addressed. It is suggested that in the future the in situ wet cell TEM/STEM technology will have an increasing impact on frontier nanoscale research.

  15. Nanoscale deformation analysis with high-resolution transmission electron microscopy and digital image correlation

    DOE PAGES

    Wang, Xueju; Pan, Zhipeng; Fan, Feifei; ...

    2015-09-10

    We present an application of the digital image correlation (DIC) method to high-resolution transmission electron microscopy (HRTEM) images for nanoscale deformation analysis. The combination of DIC and HRTEM offers both the ultrahigh spatial resolution and high displacement detection sensitivity that are not possible with other microscope-based DIC techniques. We demonstrate the accuracy and utility of the HRTEM-DIC technique through displacement and strain analysis on amorphous silicon. Two types of error sources resulting from the transmission electron microscopy (TEM) image noise and electromagnetic-lens distortions are quantitatively investigated via rigid-body translation experiments. The local and global DIC approaches are applied for themore » analysis of diffusion- and reaction-induced deformation fields in electrochemically lithiated amorphous silicon. As a result, the DIC technique coupled with HRTEM provides a new avenue for the deformation analysis of materials at the nanometer length scales.« less

  16. A specimen preparation technique for plane-view studies of surfaces using transmission electron microscopy.

    PubMed

    Foss, Steinar; Taftø, Johan; Haakenaasen, Randi

    2010-01-01

    A method for preparing plane-view transmission electron microscope (TEM) samples is presented. With this inclined pseudo-plane-view technique, the undisturbed surface of the sample can be studied in plane view. Thus, nanostructures on the surface of a substrate can be studied with TEM in much the same way as with scanning electron microscopy (SEM), but in transmission at a much higher spatial resolution and with the opportunity of performing nanoscale diffraction. A glued sandwich with two surfaces facing each other was thinned at a low angle relative to the surfaces. The resultant construction contained thin wedges of the surfaces upon which it was possible to do TEM analysis. SEM analysis before and TEM analysis after such sample preparation was found to be consistent.

  17. Picometre-precision analysis of scanning transmission electron microscopy images of platinum nanocatalysts.

    PubMed

    Yankovich, Andrew B; Berkels, Benjamin; Dahmen, W; Binev, P; Sanchez, S I; Bradley, S A; Li, Ao; Szlufarska, Izabela; Voyles, Paul M

    2014-06-11

    Measuring picometre-scale shifts in the positions of individual atoms in materials provides new insight into the structure of surfaces, defects and interfaces that influence a broad variety of materials' behaviour. Here we demonstrate sub-picometre precision measurements of atom positions in aberration-corrected Z-contrast scanning transmission electron microscopy images based on the non-rigid registration and averaging of an image series. Non-rigid registration achieves five to seven times better precision than previous methods. Non-rigidly registered images of a silica-supported platinum nanocatalyst show pm-scale contraction of atoms at a (111)/(111) corner towards the particle centre and expansion of a flat (111) facet. Sub-picometre precision and standardless atom counting with <1 atom uncertainty in the same scanning transmission electron microscopy image provide new insight into the three-dimensional atomic structure of catalyst nanoparticle surfaces, which contain the active sites controlling catalytic reactions.

  18. Annular dark-field scanning transmission electron microscopy (ADF-STEM) tomography of polymer systems.

    PubMed

    Lu, Kangbo; Sourty, Erwan; Loos, Joachim

    2010-08-01

    We have utilized bright-field conventional transmission electron microscopy tomography and annular dark-field scanning transmission electron microscopy (ADF-STEM) tomography to characterize a well-defined carbon black (CB)-filled polymer nanocomposite with known CB volume concentration. For both imaging methods, contrast can be generated between the CB and the surrounding polymer matrix. The involved contrast mechanisms, in particular for ADF-STEM, will be discussed in detail. The obtained volume reconstructions were analysed and the CB volume concentrations were carefully determined from the reconstructed data. For both imaging modes, the measured CB volume concentrations are substantially different and only quantification based on the ADF-STEM data revealed about the same value as the known CB loading. Moreover, when applying low-convergence angles for imaging ADF-STEM tomography, data can be obtained of micrometre-thick samples.

  19. Nanoscale deformation analysis with high-resolution transmission electron microscopy and digital image correlation

    SciTech Connect

    Wang, Xueju; Pan, Zhipeng; Fan, Feifei; Wang, Jiangwei; Liu, Yang; Mao, Scott X.; Zhu, Ting; Xia, Shuman

    2015-09-10

    We present an application of the digital image correlation (DIC) method to high-resolution transmission electron microscopy (HRTEM) images for nanoscale deformation analysis. The combination of DIC and HRTEM offers both the ultrahigh spatial resolution and high displacement detection sensitivity that are not possible with other microscope-based DIC techniques. We demonstrate the accuracy and utility of the HRTEM-DIC technique through displacement and strain analysis on amorphous silicon. Two types of error sources resulting from the transmission electron microscopy (TEM) image noise and electromagnetic-lens distortions are quantitatively investigated via rigid-body translation experiments. The local and global DIC approaches are applied for the analysis of diffusion- and reaction-induced deformation fields in electrochemically lithiated amorphous silicon. As a result, the DIC technique coupled with HRTEM provides a new avenue for the deformation analysis of materials at the nanometer length scales.

  20. Microwave Transmission Through the Electron Cloud at the Fermilab Main Injector: Simulation and Comparison with Experiment

    SciTech Connect

    Lebrun, Paul L.G.; Veitzer, Seth Andrew; /Tech-X, Boulder

    2009-04-01

    Simulations of the microwave transmission properties through the electron cloud at the Fermilab Main Injector have been implemented using the plasma simulation code 'VORPAL'. Phase shifts and attenuation curves have been calculated for the lowest frequency TE mode, slightly above the cutoff frequency, in field free regions, in the dipoles and quadrupoles. Preliminary comparisons with experimental results for the dipole case are showed and will guide the next generation of experiments.

  1. Transmission electron microscopic study of polytene chromosome 2R from Drosophila melanogaster.

    PubMed

    Wu, M; Waddell, J

    1982-01-01

    A simple and rapid method for studying polytene chromosome squashes by transmission electron microscope (TEM) is described. This technique provides close correlation between the light microscopic image and the TEM image. Fine structures of the chromosomes are preserved. The band pattern of region 44 A to 50 F of the chromosome 2 R has been analyzed and compared with Bridges' map (1935) and Lefevre's photographic representation (1976).

  2. Environmental Transmission Electron Microscopy Study of Diesel Carbon Soot Combustion under Simulated Catalytic-Reaction Conditions.

    PubMed

    Mori, Kohsuke; Watanabe, Keitaro; Sato, Takeshi; Yamashita, Hiromi

    2015-05-18

    Environmental transmission electron microscopy (ETEM) is used to monitor the catalytic combustion of diesel carbon soot upon exposure to molecular oxygen at elevated temperatures by using a gas-injection specimen heating holder. The reaction conditions simulated in the ETEM experiments reconstruct real conditions effectively. This study demonstrated for the first time that soot combustion occurs at the soot-catalyst interface for both Ag/CeO2 and Cu/BaO/La2 O3 catalysts.

  3. Evidence from transmission electron microscopy for an oxynitride layer in oxidized Si3N4

    NASA Technical Reports Server (NTRS)

    Ogbuji, Linus U. J. T.; Smialek, J. L.

    1991-01-01

    Microstructural and energy dispersive spectrometry evidence is produced, from transmission electron microscopy, to show that a silicon oxynitride inner layer is produced by the oxidation of silicon nitride in dry oxygen at 1350 C as proposed by Tressler et al. (1989). However, details of the microstructures at the oxide/nitride interface do not agree entirely with the rest of the Tressler model for the oxidation of Si3N4.

  4. Comparison of preparation techniques for nuclear materials for transmission electron microscopy (TEM)

    SciTech Connect

    Aitkaliyeva, Assel; Madden, James W.; Miller, Brandon D; Cole, James I; Gan, Jian

    2015-04-01

    Preparation of highly radioactive and irradiated nuclear fuels and materials for transmission electron microscopy (TEM) is conjoined with a set of unique challenges, including but not limited to personnel radiation exposure and contamination. The paper evaluates three specimen preparation techniques for preparation of irradiated materials and determines which technique yields to the most reliable characterization of radiation damage microstructure. Various specimen preparation artifacts associated with each technique are considered and ways of minimizing these artifacts are addressed.

  5. Correlative super-resolution fluorescence and metal replica transmission electron microscopy

    PubMed Central

    Sochacki, Kem A.; Shtengel, Gleb; van Engelenburg, Schuyler B.; Hess, Harald F.; Taraska, Justin W.

    2014-01-01

    Super-resolution localization microscopy is combined with a complementary imaging technique, transmission electron microscopy of metal replicas, to locate proteins on the landscape of the cellular plasma membrane at the nanoscale. Robust correlation on the scale of 20 nm is validated by imaging endogenous clathrin (with 2D and 3D PALM/TEM) and the method is further used to find the previously unknown 3D position of epsin on clathrin coated structures. PMID:24464288

  6. An in situ transmission electron microscope deformation study of the slip transfer mechanisms in metals

    SciTech Connect

    Lee, T.C.; Robertson, I.M.; Birnbaum, H.K. . Dept. of Materials Science and Engineering)

    1990-09-01

    The slip transfer mechanisms across grain boundaries in 310 stainless steel, high-purity aluminum, and a Ni-S alloy have been studied by using the in situ transmission electron microscope (TEM) deformation technique. Several interactions between mobile lattice dislocations and grain boundaries have been observed, including the transfer and generation of dislocations at grain boundaries and the nucleation and propagation of a grain boundary crack. Quantitative condition have been established to correctly predict the slip transfer mechanism.

  7. A Transmission Electron Microscope Investigation of Space Weathering Effects in Hayabusa Samples

    NASA Technical Reports Server (NTRS)

    Keller, Lindsay P.; Berger, Eve L.

    2014-01-01

    The Hayabusa mission to asteroid 25143 Itokawa successfully returned the first direct samples of the regolith from the surface of an asteroid. The Hayabusa samples thus present a special opportunity to directly investigate the evolution of asteroidal surfaces, from the development of the regolith to the study of the more complex effects of space weathering. Here we describe the mineralogy, microstructure and composition of three Hayabusa mission particles using transmission electron microscope (TEM) techniques

  8. Graphene as a transparent conductive support for studying biological molecules by transmission electron microscopy

    SciTech Connect

    Nair, R. R.; Anissimova, S.; Novoselov, K. S.; Blake, P.; Blake, J. R.; Geim, A. K.; Zan, R.; Bangert, U.; Golovanov, A. P.; Morozov, S. V.; Latychevskaia, T.

    2010-10-11

    We demonstrate the application of graphene as a support for imaging individual biological molecules in transmission electron microscope (TEM). A simple procedure to produce free-standing graphene membranes has been designed. Such membranes are extremely robust and can support practically any submicrometer object. Tobacco mosaic virus has been deposited on graphene samples and observed in a TEM. High contrast has been achieved even though no staining has been applied.

  9. Direct visualization of lithium via annular bright field scanning transmission electron microscopy: a review.

    PubMed

    Findlay, Scott David; Huang, Rong; Ishikawa, Ryo; Shibata, Naoya; Ikuhara, Yuichi

    2017-02-08

    Annular bright field (ABF) scanning transmission electron microscopy has proven able to directly image lithium columns within crystalline environments, offering much insight into the structure and properties of lithium-ion battery materials. We summarize the image formation mechanisms underpinning ABF imaging, review the experimental application of this technique to imaging lithium in materials and overview the conditions that help maximize the visibility of lithium columns.

  10. Specific features of sample preparation from amorphous aluminum alloys for transmission electron microscopy

    SciTech Connect

    Volkov, P. A.; Todorova, E. V.; Bakhteeva, N. D.; Ivanova, A. G.; Vasil'ev, A. L.

    2011-05-15

    An aluminum amorphous alloy doped with transition (Fe and Ni) and rare earth (La) metals has been used as an object of systematic study of the structural transformations that are characteristic of different methods of sample preparation for transmission electron microscopy (the mechanical tearing of ribbons, electrochemical thinning, and Ar{sup +}-ion etching under different conditions). The results of X-ray diffraction analysis and a calorimetric study of the structure in comparison with electron microscopy data made it possible to determine the optimal method of sample preparation, which ensures minimum distortions in the structure of metastable amorphous alloys with a low crystallization temperature.

  11. Transmission electron microscopy analysis of skin lesions from sporotrichosis epidemic in Rio de Janeiro, Brazil.

    PubMed

    Ferreira, Cassio Porto; Oliveira de Almeida, Ana Cristina; Corte-Real, Suzana

    2015-02-01

    Transmission electron microscopy can yield useful information in a range of scientific fields; it is capable of imaging at a significantly higher resolution than light microscopes and has been a very useful tool in the identification of morphological changes of the dermis as well as assessment of changes in the extracellular matrix. Our aim is to characterize by electron microscopy the cellular profile of lesions caused by Sporothrix schenckii from the sporotrichosis epidemic in its zoonotic form that occurs in Rio de Janeiro, Brazil.

  12. Reliable strain measurement in transistor arrays by robust scanning transmission electron microscopy

    SciTech Connect

    Kim, Suhyun; Kim, Joong Jung; Jung, Younheum; Lee, Kyungwoo; Byun, Gwangsun; Hwang, KyoungHwan; Lee, Sunyoung; Lee, Kyupil

    2013-09-15

    Accurate measurement of the strain field in the channels of transistor arrays is critical for strain engineering in modern electronic devices. We applied atomic-resolution high-angle annular dark-field scanning transmission electron microscopy to quantitative measurement of the strain field in transistor arrays. The quantitative strain profile over 20 transistors was obtained with high reliability and a precision of 0.1%. The strain field was found to form homogeneously in the channels of the transistor arrays. Furthermore, strain relaxation due to the thin foil effect was quantitatively investigated for thicknesses of 35 to 275 nm.

  13. Simulation and Analysis of Microwave Transmission through an Electron Cloud, a Comparison of Results

    SciTech Connect

    Sonnad, Kiran; Sonnad, Kiran; Furman, Miguel; Veitzer, Seth; Stoltz, Peter; Cary, John

    2007-03-12

    Simulation studies for transmission of microwaves through electron cloudes show good agreement with analytic results. The elctron cloud produces a shift in phase of the microwave. Experimental observation of this phenomena would lead to a useful diagnostic tool for acessing the local density of electron clouds in an accelerator. These experiments are being carried out at the CERN SPS and the PEP-II LER at SLAC and is proposed to be done at the Fermilab maininjector. In this study, a brief analysis of the phase shift is provided and the results are compared with that obtained from simulations.

  14. New views of materials through aberration-corrected scanning transmission electron microscopy.

    PubMed

    Pennycook, S J; Varela, M

    2011-01-01

    The successful correction of third-order and, more recently, fifth-order aberrations has enormously enhanced the capabilities of the scanning transmission electron microscope (STEM), by not only achieving record resolution, but also allowing near 100% efficiency for electron energy loss spectroscopy, and higher currents for two-dimensional spectrum imaging. These advances have meant that the intrinsic advantages of the STEM, incoherent imaging and simultaneous collection of multiple complementary images can now give new insights into many areas of materials physics. Here, we review a number of examples, mostly from the field of complex oxides, and look towards new directions for the future.

  15. Ultrahigh-resolution Scanning Transmission Microscopy with Sub-?ngstrom-Sized Electron Beams

    SciTech Connect

    Abe, E.; Pennycook, Stephen J

    2005-01-01

    The scanning transmission electron microscope(STEM)with an annular dark-field(ADF) detector provides atomic-resolution incoherent images, whose resolution is dominated, to a good approximation, by the size of convergent electron beams. Improving a spherical aberra- tion of microscope objective lenses has been successful in converging the beam into sub- scale, promising a remarkably higher resolution for STEM. Here we describe the performance of aberration-corrected 300kV-STEM - the world-best STEM available today. The results clearly demonstrate that a sub- ngstrom resolution has been indeed achieved for not only simple structures but also structurally complex systems(quasicrystals).

  16. Characterization of LiBC by phase-contrast scanning transmission electron microscopy.

    PubMed

    Krumeich, Frank; Wörle, Michael; Reibisch, Philipp; Nesper, Reinhard

    2014-08-01

    LiBC was used as a model compound for probing the applicability of phase-contrast (PC) imaging in an aberration-corrected scanning transmission electron microscope (STEM) to visualize lithium distributions. In the LiBC structure, boron and carbon are arranged to hetero graphite layers between which lithium is incorporated. The crystal structure is reflected in the PC-STEM images recorded perpendicular to the layers. The experimental images and their defocus dependence match with multi-slice simulations calculated utilizing the reciprocity principle. The observation that a part of the Li positions is not occupied is likely an effect of the intense electron beam triggering Li displacement.

  17. Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials.

    PubMed

    Ke, Xiaoxing; Bittencourt, Carla; Van Tendeloo, Gustaaf

    2015-01-01

    A major revolution for electron microscopy in the past decade is the introduction of aberration correction, which enables one to increase both the spatial resolution and the energy resolution to the optical limit. Aberration correction has contributed significantly to the imaging at low operating voltages. This is crucial for carbon-based nanomaterials which are sensitive to electron irradiation. The research of carbon nanomaterials and nanohybrids, in particular the fundamental understanding of defects and interfaces, can now be carried out in unprecedented detail by aberration-corrected transmission electron microscopy (AC-TEM). This review discusses new possibilities and limits of AC-TEM at low voltage, including the structural imaging at atomic resolution, in three dimensions and spectroscopic investigation of chemistry and bonding. In situ TEM of carbon-based nanomaterials is discussed and illustrated through recent reports with particular emphasis on the underlying physics of interactions between electrons and carbon atoms.

  18. Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials

    PubMed Central

    Bittencourt, Carla; Van Tendeloo, Gustaaf

    2015-01-01

    Summary A major revolution for electron microscopy in the past decade is the introduction of aberration correction, which enables one to increase both the spatial resolution and the energy resolution to the optical limit. Aberration correction has contributed significantly to the imaging at low operating voltages. This is crucial for carbon-based nanomaterials which are sensitive to electron irradiation. The research of carbon nanomaterials and nanohybrids, in particular the fundamental understanding of defects and interfaces, can now be carried out in unprecedented detail by aberration-corrected transmission electron microscopy (AC-TEM). This review discusses new possibilities and limits of AC-TEM at low voltage, including the structural imaging at atomic resolution, in three dimensions and spectroscopic investigation of chemistry and bonding. In situ TEM of carbon-based nanomaterials is discussed and illustrated through recent reports with particular emphasis on the underlying physics of interactions between electrons and carbon atoms. PMID:26425406

  19. Strain mapping of semiconductor specimens with nm-scale resolution in a transmission electron microscope.

    PubMed

    Cooper, David; Denneulin, Thibaud; Bernier, Nicolas; Béché, Armand; Rouvière, Jean-Luc

    2016-01-01

    The last few years have seen a great deal of progress in the development of transmission electron microscopy based techniques for strain mapping. New techniques have appeared such as dark field electron holography and nanobeam diffraction and better known ones such as geometrical phase analysis have been improved by using aberration corrected ultra-stable modern electron microscopes. In this paper we apply dark field electron holography, the geometrical phase analysis of high angle annular dark field scanning transmission electron microscopy images, nanobeam diffraction and precession diffraction, all performed at the state-of-the-art to five different types of semiconductor samples. These include a simple calibration structure comprising 10-nm-thick SiGe layers to benchmark the techniques. A SiGe recessed source and drain device has been examined in order to test their capabilities on 2D structures. Devices that have been strained using a nitride stressor have been examined to test the sensitivity of the different techniques when applied to systems containing low values of deformation. To test the techniques on modern semiconductors, an electrically tested device grown on a SOI wafer has been examined. Finally a GaN/AlN superlattice was tested in order to assess the different methods of measuring deformation on specimens that do not have a perfect crystalline structure. The different deformation mapping techniques have been compared to one another and the strengths and weaknesses of each are discussed.

  20. Post-thinning using Ar ion-milling system for transmission electron microscopy specimens prepared by focused ion beam system.

    PubMed

    Lee, Min-Hee; Kim, Kyou-Hyun

    2016-03-01

    We investigate Ar ion-milling rates and Ga-ion induced damage on sample surfaces of Si and GaAs single crystals prepared by focused ion beam (FIB) method for transmission electron microscopy observation. The convergent beam electron diffraction technique with Bloch simulation is used to measure the thickness of the Ar-ion milled samples to calculate the milling rates of Si and GaAs single crystals. The measurement shows that an amorphous layer is formed on the sample surface and can be removed by further Ar-ion milling. In addition, the local symmetry breaking induced by FIB is investigated using quantitative symmetry measurement. The FIBed-GaAs sample shows local symmetry breaking after FIB milling, although the FIBed-Si sample has no considerable symmetry breaking.

  1. Transmission

    SciTech Connect

    Sugano, K.

    1988-12-27

    A transmission is described which consists of: an input shaft; an output shaft; a first planetary gear set including a first sun gear selectively connectable by a first clutch to the input shaft, a first carrier selectively connectable by a second clutch to the input shaft and a first ring gear connected to the output shaft. The first sun gear selectively held stationary by a first brake, the first carrier is allowed to rotate in the same forward direction as the input shaft when the second clutch is engaged, but prevented from rotating in a reverse direction opposite to the forward direction by a first one-way clutch, the first carrier being selectively held stationary by a second brake; a second planetary gear set including a second sun gear connected to the input shaft, a second carrier connected to the first ring gear and also the the output shaft, and a second ring gear.

  2. The Effect of Electron Beam Irradiation in Environmental Scanning Transmission Electron Microscopy of Whole Cells in Liquid.

    PubMed

    Hermannsdörfer, Justus; Tinnemann, Verena; Peckys, Diana B; de Jonge, Niels

    2016-06-01

    Whole cells can be studied in their native liquid environment using electron microscopy, and unique information about the locations and stoichiometry of individual membrane proteins can be obtained from many cells thus taking cell heterogeneity into account. Of key importance for the further development of this microscopy technology is knowledge about the effect of electron beam radiation on the samples under investigation. We used environmental scanning electron microscopy (ESEM) with scanning transmission electron microscopy (STEM) detection to examine the effect of radiation for whole fixed COS7 fibroblasts in liquid. The main observation was the localization of nanoparticle labels attached to epidermal growth factor receptors (EGFRs). It was found that the relative distances between the labels remained mostly unchanged (<1.5%) for electron doses ranging from the undamaged native state at 10 e-/Å2 toward 103 e-/Å2. This dose range was sufficient to determine the EGFR locations with nanometer resolution and to distinguish between monomers and dimers. Various different forms of radiation damage became visible at higher doses, including severe dislocation, and the dissolution of labels.

  3. Precession electron diffraction in scanning transmission electron microscopy: phase, orientation and strain mapping at the nanometer scale

    NASA Astrophysics Data System (ADS)

    Sharp, T. G.

    2015-12-01

    Precession electron diffraction is a technique used in scanning transmission electron microscopy (STEM) to collect electron diffraction patterns while precessing the beam in a cone around the optic axis of the microscope. Electrons are strongly scattered by matter, resulting in dynamical diffraction effects and complex intensity distributions. Precession diffraction produces patterns that are nearly kinematical and lack the complicated intensity distributions of dynamical scattering. These patterns are readily indexed by computer, which allows for the structural characterization of the sample at each pixel. This technique is analogous to electron backscatter diffraction (EBSD), but with higher spatial resolution. Like EBSD, precession diffraction is used to make phase and orientation maps in polycrystalline aggregates and deformed crystals. The technique also provides quantitative strain mapping at the nanometer scale for characterization of defects and coherent interfaces. This technique is especially useful for characterizing nano-scale intergrowths that are produced in high-pressure experiments and in naturally shocked samples. We are using this technique on our aberration corrects JEOL ARM200F STEM. Examples of experimentally and naturally transformed olivine will be presented.

  4. Tandem High-pressure Freezing and Quick Freeze Substitution of Plant Tissues for Transmission Electron Microscopy

    PubMed Central

    Bobik, Krzysztof; Dunlap, John R.; Burch-Smith, Tessa M.

    2014-01-01

    Since the 1940s transmission electron microscopy (TEM) has been providing biologists with ultra-high resolution images of biological materials. Yet, because of laborious and time-consuming protocols that also demand experience in preparation of artifact-free samples, TEM is not considered a user-friendly technique. Traditional sample preparation for TEM used chemical fixatives to preserve cellular structures. High-pressure freezing is the cryofixation of biological samples under high pressures to produce very fast cooling rates, thereby restricting ice formation, which is detrimental to the integrity of cellular ultrastructure. High-pressure freezing and freeze substitution are currently the methods of choice for producing the highest quality morphology in resin sections for TEM. These methods minimize the artifacts normally associated with conventional processing for TEM of thin sections. After cryofixation the frozen water in the sample is replaced with liquid organic solvent at low temperatures, a process called freeze substitution. Freeze substitution is typically carried out over several days in dedicated, costly equipment. A recent innovation allows the process to be completed in three hours, instead of the usual two days. This is typically followed by several more days of sample preparation that includes infiltration and embedding in epoxy resins before sectioning. Here we present a protocol combining high-pressure freezing and quick freeze substitution that enables plant sample fixation to be accomplished within hours. The protocol can readily be adapted for working with other tissues or organisms. Plant tissues are of special concern because of the presence of aerated spaces and water-filled vacuoles that impede ice-free freezing of water. In addition, the process of chemical fixation is especially long in plants due to cell walls impeding the penetration of the chemicals to deep within the tissues. Plant tissues are therefore particularly challenging, but

  5. Nanoscale changes in chromatin organization represent the initial steps of tumorigenesis: a transmission electron microscopy study

    PubMed Central

    2014-01-01

    Background Nuclear alterations are a well-known manifestation of cancer. However, little is known about the early, microscopically-undetectable stages of malignant transformation. Based on the phenomenon of field cancerization, the tissue in the field of a tumor can be used to identify and study the initiating events of carcinogenesis. Morphological changes in nuclear organization have been implicated in the field of colorectal cancer (CRC), and we hypothesize that characterization of chromatin alterations in the early stages of CRC will provide insight into cancer progression, as well as serve as a biomarker for early detection, risk stratification and prevention. Methods For this study we used transmission electron microscopy (TEM) images of nuclei harboring pre-neoplastic CRC alterations in two models: a carcinogen-treated animal model of early CRC, and microscopically normal-appearing tissue in the field of human CRC. We quantify the chromatin arrangement using approaches with two levels of complexity: 1) binary, where chromatin is separated into areas of dense heterochromatin and loose euchromatin, and 2) grey-scale, where the statistics of continuous mass-density distribution within the nucleus is quantified by its spatial correlation function. Results We established an increase in heterochromatin content and clump size, as well as a loss of its characteristic peripheral positioning in microscopically normal pre-neoplastic cell nuclei. Additionally, the analysis of chromatin density showed that its spatial distribution is altered from a fractal to a stretched exponential. Conclusions We characterize quantitatively and qualitatively the nanoscale structural alterations preceding cancer development, which may allow for the establishment of promising new biomarkers for cancer risk stratification and diagnosis. The findings of this study confirm that ultrastructural changes of chromatin in field carcinogenesis represent early neoplastic events leading to the

  6. Transmission Electron Microscopy Characterization of Irradiated U-7Mo/Al-2Si Dispersion Fuel

    SciTech Connect

    J. Gan; D. D. Keiser, Jr.; D. M. Wachs; A. B. Robinson; B. D. Miller; T. R. Allen

    2010-01-01

    The plate-type dispersion fuels, with the atomized U(Mo) fuel particles dispersed in the Al or Al alloy matrix, are being developed for use in research and test reactors worldwide. It is found that the irradiation performance of a plate-type dispersion fuel depends on the radiation stability of the various phases in a fuel plate. Transmission electron microscopy was performed on a sample (peak fuel mid-plane temperature approximately 109 degrees C and fission density approximately 4.5 x 10 27 fm-3) taken from an irradiated U–7Mo dispersion fuel plate with Al–2Si alloy matrix to investigate the role of Si addition in the matrix on the radiation stability of the phase(s) in the U–7Mo fuel/matrix interaction layer. A similar interaction layer that forms in irradiated U–7Mo dispersion fuels with pure Al matrix has been found to exhibit poor irradiation stability, likely as a result of poor fission gas retention. The interaction layer for both U–7Mo/Al–2Si and U–7Mo/Al fuels is observed to be amorphous. However, unlike the latter, the amorphous layer for the former was found to effectively retain fission gases in areas with high Si concentration. When the Si concentration becomes relatively low, the fission gas bubbles agglomerate into fewer large pores. Within the U–7Mo fuel particles, a bubble superlattice ordered as fcc structure and oriented parallel to the bcc metal lattice was observed where the average bubble size and the superlattice constant are approximately 3.5 nm and approximately 7.5 nm, respectively. The estimated fission gas inventory in the bubble superlattice correlates well with the fission density in the fuel.

  7. Tandem high-pressure freezing and quick freeze substitution of plant tissues for transmission electron microscopy.

    PubMed

    Bobik, Krzysztof; Dunlap, John R; Burch-Smith, Tessa M

    2014-10-13

    Since the 1940s transmission electron microscopy (TEM) has been providing biologists with ultra-high resolution images of biological materials. Yet, because of laborious and time-consuming protocols that also demand experience in preparation of artifact-free samples, TEM is not considered a user-friendly technique. Traditional sample preparation for TEM used chemical fixatives to preserve cellular structures. High-pressure freezing is the cryofixation of biological samples under high pressures to produce very fast cooling rates, thereby restricting ice formation, which is detrimental to the integrity of cellular ultrastructure. High-pressure freezing and freeze substitution are currently the methods of choice for producing the highest quality morphology in resin sections for TEM. These methods minimize the artifacts normally associated with conventional processing for TEM of thin sections. After cryofixation the frozen water in the sample is replaced with liquid organic solvent at low temperatures, a process called freeze substitution. Freeze substitution is typically carried out over several days in dedicated, costly equipment. A recent innovation allows the process to be completed in three hours, instead of the usual two days. This is typically followed by several more days of sample preparation that includes infiltration and embedding in epoxy resins before sectioning. Here we present a protocol combining high-pressure freezing and quick freeze substitution that enables plant sample fixation to be accomplished within hours. The protocol can readily be adapted for working with other tissues or organisms. Plant tissues are of special concern because of the presence of aerated spaces and water-filled vacuoles that impede ice-free freezing of water. In addition, the process of chemical fixation is especially long in plants due to cell walls impeding the penetration of the chemicals to deep within the tissues. Plant tissues are therefore particularly challenging, but

  8. Electron holography study of magnetization behavior in the writer pole of a perpendicular magnetic recording head by a 1 MV transmission electron microscope.

    PubMed

    Hirata, Kei; Ishida, Yoichi; Akashi, Tetsuya; Shindo, Daisuke; Tonomura, Akira

    2012-01-01

    The magnetic domain structure of the writer poles of perpendicular magnetic recording heads was studied using electron holography. Although the domain structure of a 100-nm-thick writer pole could be observed with a 300 kV transmission electron microscope, that of the 250-nm-thick writer pole could not be analyzed due to the limited transmission capability of the instrument. On the other hand, the detailed domain structure of the 250-nm-thick writer pole was successfully analyzed by a 1 MV electron microscope using its high transmission capability. The thickness and material dependency of the domain structure of a writer pole were discussed.

  9. Liquid scanning transmission electron microscopy: imaging protein complexes in their native environment in whole eukaryotic cells.

    PubMed

    Peckys, Diana B; de Jonge, Niels

    2014-04-01

    Scanning transmission electron microscopy (STEM) of specimens in liquid, so-called Liquid STEM, is capable of imaging the individual subunits of macromolecular complexes in whole eukaryotic cells in liquid. This paper discusses this new microscopy modality within the context of state-of-the-art microscopy of cells. The principle of operation and equations for the resolution are described. The obtained images are different from those acquired with standard transmission electron microscopy showing the cellular ultrastructure. Instead, contrast is obtained on specific labels. Images can be recorded in two ways, either via STEM at 200 keV electron beam energy using a microfluidic chamber enclosing the cells, or via environmental scanning electron microscopy at 30 keV of cells in a wet environment. The first series of experiments involved the epidermal growth factor receptor labeled with gold nanoparticles. The labels were imaged in whole fixed cells with nanometer resolution. Since the cells can be kept alive in the microfluidic chamber, it is also feasible to detect the labels in unfixed, live cells. The rapid sample preparation and imaging allows studies of multiple whole cells.

  10. Efficient linear phase contrast in scanning transmission electron microscopy with matched illumination and detector interferometry

    DOE PAGES

    Ophus, Colin; Ciston, Jim; Pierce, Jordan; ...

    2016-02-29

    The ability to image light elements in soft matter at atomic resolution enables unprecedented insight into the structure and properties of molecular heterostructures and beam-sensitive nanomaterials. In this study, we introduce a scanning transmission electron microscopy technique combining a pre-specimen phase plate designed to produce a probe with structured phase with a high-speed direct electron detector to generate nearly linear contrast images with high efficiency. We demonstrate this method by using both experiment and simulation to simultaneously image the atomic-scale structure of weakly scattering amorphous carbon and strongly scattering gold nanoparticles. Our method demonstrates strong contrast for both materials, makingmore » it a promising candidate for structural determination of heterogeneous soft/hard matter samples even at low electron doses comparable to traditional phase-contrast transmission electron microscopy. Ultimately, simulated images demonstrate the extension of this technique to the challenging problem of structural determination of biological material at the surface of inorganic crystals.« less

  11. Multiscale phase mapping of LiFePO4-based electrodes by transmission electron microscopy and electron forward scattering diffraction.

    PubMed

    Robert, Donatien; Douillard, Thierry; Boulineau, Adrien; Brunetti, Guillaume; Nowakowski, Pawel; Venet, Denis; Bayle-Guillemaud, Pascale; Cayron, Cyril

    2013-12-23

    LiFePO4 and FePO4 phase distributions of entire cross-sectioned electrodes with various Li content are investigated from nanoscale to mesoscale, by transmission electron microscopy and by the new electron forward scattering diffraction technique. The distributions of the fully delithiated (FePO4) or lithiated particles (LiFePO4) are mapped on large fields of view (>100 × 100 μm(2)). Heterogeneities in thin and thick electrodes are highlighted at different scales. At the nanoscale, the statistical analysis of 64 000 particles unambiguously shows that the small particles delithiate first. At the mesoscale, the phase maps reveal a core-shell mechanism at the scale of the agglomerates with a preferential pathway along the electrode porosities. At larger scale, lithiation occurs in thick electrodes "stratum by stratum" from the surface in contact with electrolyte toward the current collector.

  12. In situ Transmission Electron Microscopy observation of Ag nanocrystal evolution by surfactant free electron-driven synthesis

    PubMed Central

    Longo, Elson; Avansi, Waldir; Bettini, Jefferson; Andrés, Juan; Gracia, Lourdes

    2016-01-01

    The study of the interaction of electron irradiation with matter and the response of the material to the passage of electrons is a very challenging problem. However, the growth mechanism observed during nanostructural evolution appears to be a broad and promising scientific field in nanotechnology. We report the in situ TEM study of nanostructural evolution of electron-driven silver (Ag) nanocrystals through an additive-free synthetic procedure. Observations revealed the direct effect of the electron beam on the morphological evolution of Ag nanocrystals through different mechanisms, such as mass transport, site-selective coalescence, and an appropriate structural configuration after coalescence leading to a more stable configuration. A fundamental understanding of the growth and formation mechanisms of Ag nanocrystals, which interact with the electron beam, is essential to improve the nanocrystal shape-control mechanisms as well as the future design and study of nanomaterials. PMID:26979671

  13. Element discrimination in a hexagonal boron nitride nanosheet by aberration corrected transmission electron microscopy.

    PubMed

    Mitome, Masanori; Sawada, Hidetaka; Kondo, Yukihito; Tanishiro, Yasumasa; Takayanagi, Kunio

    2012-11-01

    Boron nitride nanosheets prepared by an exfoliation technique were observed by aberration corrected transmission electron microscopy at 300 kV acceleration voltage. Single boron and nitrogen atoms in a monolayer region were imaged with different image contrast; a boron atom gave 16% less intensity reduction than a nitrogen atom. The number of atoms at each hexagonal ring site was determined by the image intensity that changed discretely with a 0.25-0.30 intensity difference. A double BN sheet was found to have a boron vacancy layer, and a triple BN layer has also a boron deficient layer on the incident surface resulting from the electron beam thinning process. The high sensitivity for atomic species was achieved by the high resolution and a small information limit due to the use of a cold field emission electron source.

  14. Probing plasmons in three dimensions by combining complementary spectroscopies in a scanning transmission electron microscope

    DOE PAGES

    Hachtel, Jordan A.; Marvinney, Claire; Mouti, Anas; ...

    2016-03-02

    The nanoscale optical response of surface plasmons in three-dimensional metallic nanostructures plays an important role in many nanotechnology applications, where precise spatial and spectral characteristics of plasmonic elements control device performance. Electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) within a scanning transmission electron microscope have proven to be valuable tools for studying plasmonics at the nanoscale. Each technique has been used separately, producing three-dimensional reconstructions through tomography, often aided by simulations for complete characterization. Here we demonstrate that the complementary nature of the two techniques, namely that EELS probes beam-induced electronic excitations while CL probes radiative decay, allows usmore » to directly obtain a spatially- and spectrally-resolved picture of the plasmonic characteristics of nanostructures in three dimensions. Furthermore, the approach enables nanoparticle-by-nanoparticle plasmonic analysis in three dimensions to aid in the design of diverse nanoplasmonic applications.« less

  15. Probing plasmons in three dimensions by combining complementary spectroscopies in a scanning transmission electron microscope

    SciTech Connect

    Hachtel, Jordan A.; Marvinney, Claire; Mouti, Anas; Mayo, Daniel; Mu, Richard R.; Pennycook, Stephen J.; Lupini, Andrew R.; Chisholm, Matthew F.; Haglund, R. F.; Pantelides, Sokrates T.

    2016-03-02

    The nanoscale optical response of surface plasmons in three-dimensional metallic nanostructures plays an important role in many nanotechnology applications, where precise spatial and spectral characteristics of plasmonic elements control device performance. Electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) within a scanning transmission electron microscope have proven to be valuable tools for studying plasmonics at the nanoscale. Each technique has been used separately, producing three-dimensional reconstructions through tomography, often aided by simulations for complete characterization. Here we demonstrate that the complementary nature of the two techniques, namely that EELS probes beam-induced electronic excitations while CL probes radiative decay, allows us to directly obtain a spatially- and spectrally-resolved picture of the plasmonic characteristics of nanostructures in three dimensions. Furthermore, the approach enables nanoparticle-by-nanoparticle plasmonic analysis in three dimensions to aid in the design of diverse nanoplasmonic applications.

  16. New area detector for atomic-resolution scanning transmission electron microscopy.

    PubMed

    Shibata, Naoya; Kohno, Yuji; Findlay, Scott D; Sawada, Hidetaka; Kondo, Yukihito; Ikuhara, Yuichi

    2010-01-01

    A new area detector for atomic-resolution scanning transmission electron microscopy (STEM) is developed and tested. The circular detector is divided into 16 segments which are individually optically coupled with photomultiplier tubes. Thus, 16 atomic-resolution STEM images which are sensitive to the spatial distribution of scattered electrons on the detector plane can be simultaneously obtained. This new detector can be potentially used not only for the simultaneous formation of common bright-field, low-angle annular dark-field and high-angle annular dark-field images, but also for the quantification of images by detecting the full range of scattered electrons and even for exploring novel atomic-resolution imaging modes by post-processing combination of the individual images.

  17. Atomic scale characterization of semiconductor interfaces by scanning transmission electron microscopy

    SciTech Connect

    Pennycook, S.J.; Chisholm, M.F.; Duscher, G.; Maiti, A.; Pantelides, S.T.

    1997-05-01

    Recently, the scanning transmission electron microscope has become capable of forming electron probes of atomic dimensions. Through the technique of Z-contrast imaging, it is now possible to form atomic resolution images with high compositional sensitivity from which atomic column positions can be directly determined. An incoherent image of this nature also allows atomic resolution chemical analysis to be performed, by locating the probe over particular columns or planes seen in the image while electron energy loss spectra are collected. These powerful techniques, combined with atomic-scale calculations, constitute a powerful probe of the structural, kinetic and thermodynamic properties of complex materials. The authors show the direct observation of As segregated to specific sites in a Si grain boundary, and present a candidate model for the structure of the Si/SiO{sub 2} interface.

  18. Photocurrent enhancement in nonpolar liquids by the addition of electron scavengers

    SciTech Connect

    Howell, G.A.; Lee, K.; Tweeten, D.W.; Lipsky, S.

    1988-07-14

    The photocurrent from anthracene, triphenylamine, and N,N,N',N'-tetramethyl-p-phenylenediamine excited above their ionization thresholds in liquid n-pentane or n-hexane is found to be enhanced by the addition of low concentrations (/approx lt/0.02 M) of the electron scavengers perfluoromethylcyclohexane or perfluorodecalin. The enhancement is not observed in solvents of higher electron mobility (e.g.,. cyclohexane, isooctane, etc.) or for scavengers of lower electron affinity (e.g., n-perfluorohexane). For the solute naphthalene, no enhancement is observed under any conditions. The effects of excitation energy and applied electric field strength are reported.

  19. Practical Considerations for High Spatial and Temporal Resolution Dynamic Transmission Electron Microscopy

    SciTech Connect

    Armstrong, M; Boyden, K; Browning, N D; Campbell, G H; Colvin, J D; DeHope, B; Frank, A M; Gibson, D J; Hartemann, F; Kim, J S; King, W E; LaGrange, T B; Pyke, B J; Reed, B W; Shuttlesworth, R M; Stuart, B C; Torralva, B R

    2006-05-01

    Although recent years have seen significant advances in the spatial resolution possible in the transmission electron microscope (TEM), the temporal resolution of most microscopes is limited to video rate at best. This lack of temporal resolution means that our understanding of dynamic processes in materials is extremely limited. High temporal resolution in the TEM can be achieved, however, by replacing the normal thermionic or field emission source with a photoemission source. In this case the temporal resolution is limited only by the ability to create a short pulse of photoexcited electrons in the source, and this can be as short as a few femtoseconds. The operation of the photo-emission source and the control of the subsequent pulse of electrons (containing as many as 5 x 10{sup 7} electrons) create significant challenges for a standard microscope column that is designed to operate with a single electron in the column at any one time. In this paper, the generation and control of electron pulses in the TEM to obtain a temporal resolution <10{sup -6} s will be described and the effect of the pulse duration and current density on the spatial resolution of the instrument will be examined. The potential of these levels of temporal and spatial resolution for the study of dynamic materials processes will also be discussed.

  20. Anisotropic Shape Changes of Silica Nanoparticles Induced in Liquid with Scanning Transmission Electron Microscopy.

    PubMed

    Zečević, Jovana; Hermannsdörfer, Justus; Schuh, Tobias; de Jong, Krijn P; de Jonge, Niels

    2017-01-01

    Liquid-phase transmission electron microscopy (TEM) is used for in-situ imaging of nanoscale processes taking place in liquid, such as the evolution of nanoparticles during synthesis or structural changes of nanomaterials in liquid environment. Here, it is shown that the focused electron beam of scanning TEM (STEM) brings about the dissolution of silica nanoparticles in water by a gradual reduction of their sizes, and that silica redeposites at the sides of the nanoparticles in the scanning direction of the electron beam, such that elongated nanoparticles are formed. Nanoparticles with an elongation in a different direction are obtained simply by changing the scan direction. Material is expelled from the center of the nanoparticles at higher electron dose, leading to the formation of doughnut-shaped objects. Nanoparticles assembled in an aggregate gradually fuse, and the electron beam exposed section of the aggregate reduces in size and is elongated. Under TEM conditions with a stationary electron beam, the nanoparticles dissolve but do not elongate. The observed phenomena are important to consider when conducting liquid-phase STEM experiments on silica-based materials and may find future application for controlled anisotropic manipulation of the size and the shape of nanoparticles in liquid.

  1. High Dynamic Range Pixel Array Detector for Scanning Transmission Electron Microscopy.

    PubMed

    Tate, Mark W; Purohit, Prafull; Chamberlain, Darol; Nguyen, Kayla X; Hovden, Robert; Chang, Celesta S; Deb, Pratiti; Turgut, Emrah; Heron, John T; Schlom, Darrell G; Ralph, Daniel C; Fuchs, Gregory D; Shanks, Katherine S; Philipp, Hugh T; Muller, David A; Gruner, Sol M

    2016-02-01

    We describe a hybrid pixel array detector (electron microscope pixel array detector, or EMPAD) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128×128 pixel detector consists of a 500 µm thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit. The in-pixel circuitry provides a 1,000,000:1 dynamic range within a single frame, allowing the direct electron beam to be imaged while still maintaining single electron sensitivity. A 1.1 kHz framing rate enables rapid data collection and minimizes sample drift distortions while scanning. By capturing the entire unsaturated diffraction pattern in scanning mode, one can simultaneously capture bright field, dark field, and phase contrast information, as well as being able to analyze the full scattering distribution, allowing true center of mass imaging. The scattering is recorded on an absolute scale, so that information such as local sample thickness can be directly determined. This paper describes the detector architecture, data acquisition system, and preliminary results from experiments with 80-200 keV electron beams.

  2. Experiments in transmission of free electron laser radiation by flexible waveguides

    NASA Astrophysics Data System (ADS)

    Gannot, Israel; Waynant, Ronald W.; Dror, Jacob; Inberg, Alexandra; Croitoru, Nathan I.

    1996-04-01

    The free electron laser (FEL) is a unique laser which is tunable over a wide segment of the spectrum. Its tunability can open a wide range of applications in medicine -- both surgical and diagnostic. A delivery device such as a waveguide or a fiber, flexible enough, which will be coupled to its outlet, will enable maneuvering the beam conveniently at the operating site. The greatest obstacle for such a fiber or waveguide is the high peak power of several MWatts that characterize the beam and the wide range of wavelengths. Flexible hollow waveguides made of either a fused silica or a Teflon tubing, internally coated with reflecting/refracting layers, were used in experiments at 3 FEL centers in the U.S. A segment of the mid IR spectrum (between 6 and 7 micrometers). Results of the beam shape (both temporal and spatial) and transmission measurements have proven the potential of this waveguide for transmission of FEL radiation.

  3. Investigation of non-linear imaging in high-resolution transmission electron microscopy.

    PubMed

    Chang, Yunjie; Wang, Yumei; Cui, Yanxiang; Ge, Binghui

    2016-12-01

    Transmission cross-coefficient theory and pseudo-weak-phase object approximation theory were combined to investigate the non-linear imaging in high-resolution transmission electron microscopy (HRTEM). The analytical expressions of linear and non-linear imaging components in diffractogram were obtained and changes of linear and non-linear components over sample thickness were analyzed. Moreover, the linear and non-linear components are found to be an odd and even-function of the defocus and Cs, respectively. Based on this, a method for separating the linear and non-linear contrasts in Cs-corrected (non-zero Cs conditions included) HRTEM images was proposed, and its effectiveness was confirmed by image simulations with AlN as an example.

  4. Combined scanning transmission X-ray and electron microscopy for the characterization of bacterial endospores.

    PubMed

    Jamroskovic, Jan; Shao, Paul P; Suvorova, Elena; Barak, Imrich; Bernier-Latmani, Rizlan

    2014-09-01

    Endospores (also referred to as bacterial spores) are bacterial structures formed by several bacterial species of the phylum Firmicutes. Spores form as a response to environmental stress. These structures exhibit remarkable resistance to harsh environmental conditions such as exposure to heat, desiccation, and chemical oxidants. The spores include several layers of protein and peptidoglycan that surround a core harboring DNA as well as high concentrations of calcium and dipicolinic acid (DPA). A combination of scanning transmission X-ray microscopy, scanning transmission electron microscopy, and energy dispersive spectroscopy was used for the direct quantitative characterization of bacterial spores. The concentration and localization of DPA, Ca(2+) , and other elements were determined and compared for the core and cortex of spores from two distinct genera: Bacillus subtilis and Desulfotomaculum reducens. This micro-spectroscopic approach is uniquely suited for the direct study of individual bacterial spores, while classical molecular and biochemical methods access only bulk characteristics.

  5. Measurement of the transmission phase of an electron in a quantum two-path interferometer

    SciTech Connect

    Takada, S. Watanabe, K.; Yamamoto, M.; Bäuerle, C.; Ludwig, A.; Wieck, A. D.; Tarucha, S.

    2015-08-10

    A quantum two-path interferometer allows for direct measurement of the transmission phase shift of an electron, providing useful information on coherent scattering problems. In mesoscopic systems, however, the two-path interference is easily smeared by contributions from other paths, and this makes it difficult to observe the true transmission phase shift. To eliminate this problem, multi-terminal Aharonov-Bohm (AB) interferometers have been used to derive the phase shift by assuming that the relative phase shift of the electrons between the two paths is simply obtained when a smooth shift of the AB oscillations is observed. Nevertheless, the phase shifts using such a criterion have sometimes been inconsistent with theory. On the other hand, we have used an AB ring contacted to tunnel-coupled wires and acquired the phase shift consistent with theory when the two output currents through the coupled wires oscillate with well-defined anti-phase. Here, we investigate thoroughly these two criteria used to ensure a reliable phase measurement, the anti-phase relation of the two output currents, and the smooth phase shift in the AB oscillation. We confirm that the well-defined anti-phase relation ensures a correct phase measurement with a quantum two-path interference. In contrast, we find that even in a situation where the anti-phase relation is less well-defined, the smooth phase shift in the AB oscillation can still occur but does not give the correct transmission phase due to contributions from multiple paths. This indicates that the phase relation of the two output currents in our interferometer gives a good criterion for the measurement of the true transmission phase, while the smooth phase shift in the AB oscillation itself does not.

  6. Imaging flux vortices in type II superconductors with a commercial transmission electron microscope.

    PubMed

    Loudon, J C; Midgley, P A

    2009-05-01

    Flux vortices in superconductors can be imaged using transmission electron microscopy because the electron beam is deflected by the magnetic flux associated with the vortices. This technique has a better spatial and temporal resolution than many other imaging techniques and is sensitive to the magnetic flux density within each vortex, not simply the fields at the sample surface. Despite these advantages, only two groups have successfully employed the technique using specially adapted instruments. Here we demonstrate that vortices can be imaged with a modern, commercial transmission electron microscope operating at 300kV equipped with a field emission gun, Lorentz lens and a liquid helium cooled sample holder. We introduce superconductivity for non-specialists and discuss techniques for simulating and optimising images of flux vortices. Sample preparation is discussed in detail as the main difficulty with the technique is the requirement for samples with very large (>10microm), flat areas so that the image is not dominated by diffraction contrast. We have imaged vortices in superconducting Bi(2)Sr(2)CaCu(2)O(8-delta) and use correlation functions to investigate the ordered arrangements they adopt as a function of applied magnetic field.

  7. Atomic-scale imaging and spectroscopy for in situ liquid scanning transmission electron microscopy.

    PubMed

    Jungjohann, Katherine L; Evans, James E; Aguiar, Jeffery A; Arslan, Ilke; Browning, Nigel D

    2012-06-01

    Observation of growth, synthesis, dynamics, and electrochemical reactions in the liquid state is an important yet largely unstudied aspect of nanotechnology. The only techniques that can potentially provide the insights necessary to advance our understanding of these mechanisms is simultaneous atomic-scale imaging and quantitative chemical analysis (through spectroscopy) under environmental conditions in the transmission electron microscope. In this study we describe the experimental and technical conditions necessary to obtain electron energy loss (EEL) spectra from a nanoparticle in colloidal suspension using aberration-corrected scanning transmission electron microscopy (STEM) combined with the environmental liquid stage. At a fluid path length below 400 nm, atomic resolution images can be obtained and simultaneous compositional analysis can be achieved. We show that EEL spectroscopy can be used to quantify the total fluid path length around the nanoparticle and demonstrate that characteristic core-loss signals from the suspended nanoparticles can be resolved and analyzed to provide information on the local interfacial chemistry with the surrounding environment. The combined approach using aberration-corrected STEM and EEL spectra with the in situ fluid stage demonstrates a plenary platform for detailed investigations of solution-based catalysis.

  8. Scanning and transmission electron microscopic analysis of ampullary segment of oviduct during estrous cycle in caprines.

    PubMed

    Sharma, R K; Singh, R; Bhardwaj, J K

    2015-01-01

    The ampullary segment of the mammalian oviduct provides suitable milieu for fertilization and development of zygote before implantation into uterus. It is, therefore, in the present study, the cyclic changes in the morphology of ampullary segment of goat oviduct were studied during follicular and luteal phases using scanning and transmission electron microscopy techniques. Topographical analysis revealed the presence of uniformly ciliated ampullary epithelia, concealing apical processes of non-ciliated cells along with bulbous secretory cells during follicular phase. The luteal phase was marked with decline in number of ciliated cells with increased occurrence of secretory cells. The ultrastructure analysis has demonstrated the presence of indented nuclear membrane, supranuclear cytoplasm, secretory granules, rough endoplasmic reticulum, large lipid droplets, apically located glycogen masses, oval shaped mitochondria in the secretory cells. The ciliated cells were characterized by the presence of elongated nuclei, abundant smooth endoplasmic reticulum, oval or spherical shaped mitochondria with crecentric cristae during follicular phase. However, in the luteal phase, secretory cells were possessing highly indented nucleus with diffused electron dense chromatin, hyaline nucleosol, increased number of lipid droplets. The ciliated cells had numerous fibrous granules and basal bodies. The parallel use of scanning and transmission electron microscopy techniques has enabled us to examine the cyclic and hormone dependent changes occurring in the topography and fine structure of epithelium of ampullary segment and its cells during different reproductive phases that will be great help in understanding major bottle neck that limits success rate in vitro fertilization and embryo transfer technology.

  9. Atomic-Scale Imaging and Spectroscopy for In Situ Liquid Scanning Transmission Electron Microscopy

    SciTech Connect

    Jungjohann, K. L.; Evans, James E.; Aguiar, Jeff; Arslan, Ilke; Browning, Nigel D.

    2012-06-04

    Observation of growth, synthesis, dynamics and electrochemical reactions in the liquid state is an important yet largely unstudied aspect of nanotechnology. The only techniques that can potentially provide the insights necessary to advance our understanding of these mechanisms is simultaneous atomic-scale imaging and quantitative chemical analysis (through spectroscopy) under environmental conditions in the transmission electron microscope (TEM). In this study we describe the experimental and technical conditions necessary to obtain electron energy loss (EEL) spectra from a nanoparticle in colloidal suspension using aberration corrected scanning transmission electron microscopy (STEM) combined with the environmental liquid stage. At a fluid path length below 400 nm, atomic resolution images can be obtained and simultaneous compositional analysis can be achieved. We show that EEL spectroscopy can be used to quantify the total fluid path length around the nanoparticle, and demonstrate characteristic core-loss signals from the suspended nanoparticles can be resolved and analyzed to provide information on the local interfacial chemistry with the surrounding environment. The combined approach using aberration corrected STEM and EEL spectra with the in situ fluid stage demonstrates a plenary platform for detailed investigations of solution based catalysis and biological research.

  10. Chemical mapping and quantification at the atomic scale by scanning transmission electron microscopy.

    PubMed

    Chu, Ming-Wen; Chen, Cheng Hsuan

    2013-06-25

    With innovative modern material-growth methods, a broad spectrum of fascinating materials with reduced dimensions-ranging from single-atom catalysts, nanoplasmonic and nanophotonic materials to two-dimensional heterostructural interfaces-is continually emerging and extending the new frontiers of materials research. A persistent central challenge in this grand scientific context has been the detailed characterization of the individual objects in these materials with the highest spatial resolution, a problem prompting the need for experimental techniques that integrate both microscopic and spectroscopic capabilities. To date, several representative microscopy-spectroscopy combinations have become available, such as scanning tunneling microscopy, tip-enhanced scanning optical microscopy, atom probe tomography, scanning transmission X-ray microscopy, and scanning transmission electron microscopy (STEM). Among these tools, STEM boasts unique chemical and electronic sensitivity at unparalleled resolution. In this Perspective, we elucidate the advances in STEM and chemical mapping applications at the atomic scale by energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy with a focus on the ultimate challenge of chemical quantification with atomic accuracy.

  11. Studying Dynamic Processes of Nano-sized Objects in Liquid using Scanning Transmission Electron Microscopy.

    PubMed

    Hermannsdörfer, Justus; de Jonge, Niels

    2017-02-05

    Samples fully embedded in liquid can be studied at a nanoscale spatial resolution with Scanning Transmission Electron Microscopy (STEM) using a microfluidic chamber assembled in the specimen holder for Transmission Electron Microscopy (TEM) and STEM. The microfluidic system consists of two silicon microchips supporting thin Silicon Nitride (SiN) membrane windows. This article describes the basic steps of sample loading and data acquisition. Most important of all is to ensure that the liquid compartment is correctly assembled, thus providing a thin liquid layer and a vacuum seal. This protocol also includes a number of tests necessary to perform during sample loading in order to ensure correct assembly. Once the sample is loaded in the electron microscope, the liquid thickness needs to be measured. Incorrect assembly may result in a too-thick liquid, while a too-thin liquid may indicate the absence of liquid, such as when a bubble is formed. Finally, the protocol explains how images are taken and how dynamic processes can be studied. A sample containing AuNPs is imaged both in pure water and in saline.

  12. Gas mixing system for imaging of nanomaterials under dynamic environments by environmental transmission electron microscopy

    SciTech Connect

    Akatay, M. Cem; Zvinevich, Yury; Ribeiro, Fabio H. E-mail: estach@bnl.gov; Baumann, Philipp; Stach, Eric A. E-mail: estach@bnl.gov

    2014-03-15

    A gas mixing manifold system that is capable of delivering a stable pressure stream of a desired composition of gases into an environmental transmission electron microscope has been developed. The system is designed to provide a stable imaging environment upon changes of either the composition of the gas mixture or upon switching from one gas to another. The design of the system is described and the response of the pressure inside the microscope, the sample temperature, and sample drift in response to flow and composition changes of the system are reported.

  13. New Technique for Successful Thermal Barrier Coating Specimen Preparation for Transmission Electron Microscopy.

    PubMed

    Brickey; Lee

    2000-05-01

    Reliability of thermal barrier coatings (TBC) hinges on the adhesion of a thermally grown oxide scale to an insulative ceramic topcoat and an underlying metallic bondcoat. The width of the scale and its interfaces makes transmission electron microscopy (TEM) an appropriate tool for its analysis. However, specimen preparation has proven to be a challenging obstacle leading to a dearth of TEM research on TBCs. A new approach to cross-section TBC TEM specimen preparation is described. The principal advantages of this technique are reproducibility, reduced specimen damage, and time savings resulting from decreased ion milling. This technique has been successfully applied to numerous TBC specimens with various thermal histories.

  14. Nanocrystal Diffusion in a Liquid Thin Film Observed by in situ Transmission Electron Microscopy

    SciTech Connect

    Zheng, Haimei; Claridge, Shelley A.; Minor, Andrew M.; Alivisatos, A. Paul; Dahmen, Ulrich

    2009-04-17

    We have directly observed motion of inorganic nanoparticles during fluid evaporation using a Transmission Electron Microscope. Tracking real-time diffusion of both spherical (5-15 nm) and rod-shaped (5x10 nm) gold nanocrystals in a thin-film of water-15percentglycerol reveals complex movements, such as rolling motions coupled to large-step movements and macroscopic violations of the Stokes-Einstein relation for diffusion. As drying patches form during the final stages of evaporation, particle motion is dominated by the nearby retracting liquid front.

  15. Tunable photon transmission through a waveguide cavity coupled to an electron spin ensemble

    NASA Astrophysics Data System (ADS)

    Feng, Zhi-Bo; Yan, Run-Ying; Yan, Lei-Lei; Zhou, Yun-Qing

    2017-02-01

    We propose an effective scheme for implementing tunable photon transmission through a coplanar waveguide cavity. An electron spin ensemble of nitrogen-vacancy centers, behaving as a spin-boson mode, is coupled to the cavity mode. It is found that the transmittance of an incident photon depends on the coupling strength between the two modes, both with dissipative effects. In particular, the photon transmittance can be controlled at will by adjusting the external driving-induced detunings. This proposal could offer a promising avenue to coherently control photon propagation and is highly preferable for the experimental manipulations.

  16. [Transmissing electron microscopy of the vitreo-macular border in clinically significant diabetic macular edema].

    PubMed

    Synek, S; Pác, L; Synková, M

    2007-09-01

    The authors examined samples of the epimacular tissue in clinically significant macular edema by means of the transmissing electron microscopy. They did not found morphological differences between samples from patients already treated by means of laser photocoagulation before the pars plana vitrectomy and those without the laser treatment. Findings may be divided into three groups: (1) the inner limiting membrane (ILM) covered with collagen vitreous fibers, (2) cells' elements of the fibroblasts category, and (3) fibrous astrocytes in the vitreous cortex constituting one- or multilayer cellular membranes.

  17. Liquid scanning transmission electron microscopy: Nanoscale imaging in micrometers-thick liquids

    NASA Astrophysics Data System (ADS)

    Schuh, Tobias; de Jonge, Niels

    2014-02-01

    Scanning transmission electron microscopy (STEM) of specimens in liquid is possible using a microfluidic chamber with thin silicon nitride windows. This paper includes an analytic equation of the resolution as a function of the sample thickness and the vertical position of an object in the liquid. The equipment for STEM of liquid specimen is briefly described. STEM provides nanometer resolution in micrometer-thick liquid layers with relevance for both biological research and materials science. Using this technique, we investigated tagged proteins in whole eukaryotic cells, and gold nanoparticles in liquid with time-lapse image series. Possibly future applications are discussed. xml:lang="fr"

  18. In situ transmission electron microscopy analysis of conductive filament during solid electrolyte resistance switching

    SciTech Connect

    Fujii, Takashi; Arita, Masashi; Takahashi, Yasuo; Fujiwara, Ichiro

    2011-05-23

    An in situ transmission electron microscopy (TEM) analysis of a solid electrolyte, Cu-GeS, during resistance switching is reported. Real-time observations of the filament formation and disappearance process were performed in the TEM instrument and the conductive-filament-formation model was confirmed experimentally. Narrow conductive filaments were formed corresponding to resistance switching from high- to low-resistance states. When the resistance changed to high-resistance state, the filament disappeared. It was also confirmed by use of selected area diffractometry and energy-dispersive x-ray spectroscopy that the conductive filament was made of nanocrystals composed mainly of Cu.

  19. In situ nanomechanical testing of twinned metals in a transmission electron microscope

    SciTech Connect

    Li, Nan; Wang, Jiangwei; Mao, Scott; Wang, Haiyan

    2016-04-01

    This paper focuses on in situ transmission electron microscope (TEM) characterization to explore twins in face-centered-cubic and body-centered-cubic monolithic metals, and their impact on the overall mechanical performance. Taking advantage of simultaneous nanomechanical deformation and nanoscale imaging using versatile in situ TEM tools, direct correlation of these unique microscopic defects with macroscopic mechanical performance becomes possible. This article summarizes recent evidence to support the mechanisms related to strengthening and plasticity in metals, including nanotwinned Cu, Ni, Al, Au, and others in bulk, thin film, and nanowire forms.

  20. Visualizing non-equilibrium lithiation of spinel oxide via in situ transmission electron microscopy

    DOE PAGES

    He, Kai; Zhang, Sen; Li, Jing; ...

    2016-05-09

    In this study, spinel transition metal oxides are an important class of materials that are being considered as electrodes for lithium-ion batteries, due to their low cost and high theoretical capacity. The lithiation of these compounds is known to undergo a two-step reaction, whereby intercalation and conversion occur in a sequential fashion. These two reactions are known to have distinct reaction dynamics, but it is unclear how the kinetics of these processes affect the overall electrochemical response. Here, we explore the lithiation of nanosized magnetite (Fe3O4) by employing a new strain-sensitive, bright-field scanning transmission electron microscopy approach.

  1. Transmission electron microscope imaging of single-walled carbon nanotube interactions and mechanics on nitride grids

    NASA Astrophysics Data System (ADS)

    Abrams, Z. R.; Lereah, Y.; Hanein, Y.

    2006-09-01

    A method for analysing systems of isolated single-walled carbon nanotubes is of paramount importance if their structural characteristics are to be fully understood and utilized. Here we offer a simple technique for analysing such systems, with unprecedented contrast, using transmission electron microscope imaging of carbon nanotubes suspended over large holes in a silicon nitride grid. The nanotubes are grown directly on the viewing grids, using the chemical vapour deposition process, thus avoiding the use of chemicals or aggressive treatments. This method is simultaneously non-invasive, reusable, allows the analysis of multiple structures based on carbon nanotubes and is quickly implemented.

  2. In situ investigation of the mechanical properties of nanomaterials by transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Sun, Jun; Xu, Feng; Sun, Li-Tao

    2012-12-01

    With the progress of modern transmission electron microscopy (TEM) and development of dedicated functional TEM specimen holders, people can now manipulate a nano-object with nanometer-range precision and simultaneously acquire mechanical data together with atomic-scale structural information. This advanced methodology is playing an increasingly important role in nanomechanics. The present review summarizes relevant studies on the in situ investigation of mechanical properties of various nanomaterials over the past decades. These works enrich our knowledge not only on nanomaterials (such as carbon nanotubes, carbon onions, boron nitride nanotubes, silicon nanowires and graphene, etc.) but also on mechanics at the nanoscale.

  3. Soot Nanostructure: Using Fringe Analysis Software on High Resolution Transmission Electron Microscopy of Carbon Soot

    NASA Technical Reports Server (NTRS)

    King, James D.

    2004-01-01

    Using high resolution transmission electron images of carbon nanotubes and carbon particles, we are able to use image analysis program to determine several carbon fringe properties, including length, separation, curvature and orientation. Results are shown in the form of histograms for each of those quantities. The combination of those measurements can give a better indication of the graphic structure within nanotubes and particles of carbon and can distinguish carbons based upon fringe properties. Carbon with longer, straighter and closer spaced fringes are considered graphite, while amorphous carbon contain shorter, less structured fringes.

  4. Visualizing gold nanoparticle uptake in live cells with liquid scanning transmission electron microscopy.

    PubMed

    Peckys, Diana B; de Jonge, Niels

    2011-04-13

    The intracellular uptake of 30 nm diameter gold nanoparticles (Au-NPs) was studied at the nanoscale in pristine eukaryotic cells. Live COS-7 cells were maintained in a microfluidic chamber and imaged using scanning transmission electron microscopy. A quantitative image analysis showed that Au-NPs bound to the membranes of vesicles, possibly lysosomes, and occupied 67% of the available surface area. The vesicles accumulated to form a micrometer-sized cluster after 24 h of incubation. Two clusters were analyzed and found to consist of 117 ± 9 and 164 ± 4 NP-filled vesicles.

  5. Carbon Nanostructure Examined by Lattice Fringe Analysis of High Resolution Transmission Electron Microscopy Images

    NASA Technical Reports Server (NTRS)

    VanderWal, Randy L.; Tomasek, Aaron J.; Street, Kenneth; Thompson, William K.

    2002-01-01

    The dimensions of graphitic layer planes directly affect the reactivity of soot towards oxidation and growth. Quantification of graphitic structure could be used to develop and test correlations between the soot nanostructure and its reactivity. Based upon transmission electron microscopy images, this paper provides a demonstration of the robustness of a fringe image analysis code for determining the level of graphitic structure within nanoscale carbon, i.e. soot. Results, in the form of histograms of graphitic layer plane lengths, are compared to their determination through Raman analysis.

  6. Carbon Nanostructure Examined by Lattice Fringe Analysis of High Resolution Transmission Electron Microscopy Images

    NASA Technical Reports Server (NTRS)

    VanderWal, Randy L.; Tomasek, Aaron J.; Street, Kenneth; Thompson, William K.; Hull, David R.

    2003-01-01

    The dimensions of graphitic layer planes directly affect the reactivity of soot towards oxidation and growth. Quantification of graphitic structure could be used to develop and test correlations between the soot nanostructure and its reactivity. Based upon transmission electron microscopy images, this paper provides a demonstration of the robustness of a fringe image analysis code for determining the level of graphitic structure within nanoscale carbon, i.e., soot. Results, in the form of histograms of graphitic layer plane lengths, are compared to their determination through Raman analysis.

  7. Filamentous phage pIV multimer visualized by scanning transmission electron microscopy

    SciTech Connect

    Linderoth, N.A.; Russel, M.; Simon, M.N.

    1997-11-28

    A family of homomultimeric outer-membrane proteins termed secretins mediates the secretion of large macromolecules such as enzymes and filamentous bacteriophages across bacterial outer membranes to the extracellular millieu. The secretin encoded by filamentous phage f1 was purified. Mass determination of individual molecules by scanning transmission electron microscopy revealed two forms, a unit multimer composed of about 14 subunits and a multimer dimer. The secretin is roughly cylindrical and has an internal diameter of about 80 angstroms, which is large enough to accommodate filamentous phage (diameter of 65 angstroms). 21 refs., 3 figs., 1 tab.

  8. Transmission Electron Microscopy Investigation of Krypton Bubbles in Polycrystalline CeO2

    SciTech Connect

    Lingfeng He; Clarissa Yablinsky; Mahima Gupta; Jian Gan; Marquis A. Kirk; Todd R. Allen

    2013-05-01

    To gain an understanding of gas bubble transport in oxide nuclear fuel, this paper uses polycrystalline CeO2, composed of both nanograins and micrograins, as a surrogate material for UO2. The CeO2 was implanted with 150-keV Kr ions up to a dose of 1 x 1016 ions/cm2 at 600 degrees C. Transmission electron microscopy characterizations of small Kr bubbles in nanograin and micrograin regions were compared. The grain boundary acted as an efficient defect sink, as evidenced by smaller bubbles and a lower bubble density in the nanograin region as compared to the micrograin region.

  9. Structural defects in GaN revealed by Transmission Electron Microscopy

    DOE PAGES

    Liliental-Weber, Zuzanna

    2014-09-08

    This paper reviews the various types of structural defects observed by Transmission Electron Microscopy in GaN heteroepitaxial layers grown on foreign substrates and homoepitaxial layers grown on bulk GaN substrates. The structural perfection of these layers is compared to the platelet self-standing crystals grown by High Nitrogen Pressure Solution. Defects in undoped and Mg doped GaN are discussed. Lastly, some models explaining the formation of inversion domains in heavily Mg doped layers that are possible defects responsible for the difficulties of p-doping in GaN are also reviewed.

  10. In situ nanomechanical testing of twinned metals in a transmission electron microscope

    DOE PAGES

    Li, Nan; Wang, Jiangwei; Mao, Scott; ...

    2016-04-01

    This paper focuses on in situ transmission electron microscope (TEM) characterization to explore twins in face-centered-cubic and body-centered-cubic monolithic metals, and their impact on the overall mechanical performance. Taking advantage of simultaneous nanomechanical deformation and nanoscale imaging using versatile in situ TEM tools, direct correlation of these unique microscopic defects with macroscopic mechanical performance becomes possible. This article summarizes recent evidence to support the mechanisms related to strengthening and plasticity in metals, including nanotwinned Cu, Ni, Al, Au, and others in bulk, thin film, and nanowire forms.

  11. Transmission electron microscopy study of thin sections of ultrasmall quantity of cells

    NASA Astrophysics Data System (ADS)

    Volkov, Uryi P.; Konnov, Nikolai P.; Novikova, Olga V.

    2001-10-01

    Transmission electron microscopy investigation of thin sections remains the major method of cells inner structure study with high resolution. However, the present-day technique of cells preparation make it impossible to study a number of biological samples, such as very small quantity of lymph cells of little insects (spiders, fleas, etc.). A new technique of cells preparation has been developed in our lab, which allow to obtain a thin sections of ultra small quantity of cells (less then 100). Structure of lymph cells of flea was investigated by the technique.

  12. Transmission electron microscopy of an interplanetary dust particle with links to CI chondrites

    NASA Technical Reports Server (NTRS)

    Keller, Lindsay P.; Thomas, Kathie L.; Mckay, David S.

    1991-01-01

    The majority of hydrated interplanetary dust particles (IDPs) have compositions that resemble CI and CM chondrites, however, their mineralogies are most similar to the fine grained material in certain altered type-3 carbonaceous and ordinary chondrites. During the transmission electron microscope studies of hydrated IDPs, a unique particle was discovered whose mineralogy is very similar to that reported from CI chondrites. W7013F5 is the first IDP whose mineralogy and chemistry approximates that of CI chondrites. The similarity in mineralogy and mineral chemistry suggests that W7013F5 was altered under conditions similar to those that existed on the CI parent bodies.

  13. On the visibility of very thin specimens in annular bright field scanning transmission electron microscopy

    SciTech Connect

    Phillips, P. J.; Klie, R. F.

    2013-07-15

    Annular bright field (ABF) scanning transmission electron microscopy (STEM) is emerging as an important observation mode for its ability to simultaneously image both heavy and light elements. However, recent results have demonstrated that in the limit of a very thin specimen (a few atomic layers), the ABF and high angle annular dark field (HAADF) signals cease to be intuitively related: a phenomenon which is generally irrelevant when imaging 'normal' specimens. ABF/HAADF STEM observations and multislice image simulations of two catalyst samples of differing atomic weights are presented; it is shown that the nature of the ABF signal is specimen dependent.

  14. Crack tip shielding observed with high-resolution transmission electron microscopy.

    PubMed

    Adhika, Damar Rastri; Tanaka, Masaki; Daio, Takeshi; Higashida, Kenji

    2015-10-01

    The dislocation shielding field at a crack tip was experimentally proven at the atomic scale by measuring the local strain in front of the crack tip using high-resolution transmission electron microscopy (HRTEM) and geometric phase analysis (GPA). Single crystalline (110) silicon wafers were employed. Cracks were introduced using a Vickers indenter at room temperature. The crack tip region was observed using HRTEM followed by strain measurements using GPA. The measured strain field at the crack tip was compressive owing to dislocation shielding, which is in good agreement with the strain field calculated from elastic theory.

  15. Crack tip shielding observed with high-resolution transmission electron microscopy

    PubMed Central

    Adhika, Damar Rastri; Tanaka, Masaki; Daio, Takeshi; Higashida, Kenji

    2015-01-01

    The dislocation shielding field at a crack tip was experimentally proven at the atomic scale by measuring the local strain in front of the crack tip using high-resolution transmission electron microscopy (HRTEM) and geometric phase analysis (GPA). Single crystalline (110) silicon wafers were employed. Cracks were introduced using a Vickers indenter at room temperature. The crack tip region was observed using HRTEM followed by strain measurements using GPA. The measured strain field at the crack tip was compressive owing to dislocation shielding, which is in good agreement with the strain field calculated from elastic theory. PMID:26115957

  16. GHz laser-free time-resolved transmission electron microscopy: A stroboscopic high-duty-cycle method.

    PubMed

    Qiu, Jiaqi; Ha, Gwanghui; Jing, Chunguang; Baryshev, Sergey V; Reed, Bryan W; Lau, June W; Zhu, Yimei

    2016-02-01

    A device and a method for producing ultrashort electron pulses with GHz repetition rates via pulsing an input direct current (dc) electron beam are provided. The device and the method are based on an electromagnetic-mechanical pulser (EMMP) that consists of a series of transverse deflecting cavities and magnetic quadrupoles. The EMMP modulates and chops the incoming dc electron beam and converts it into pico- and sub-pico-second electron pulse sequences (pulse trains) at >1GHz repetition rates, as well as controllably manipulates the resulting pulses. Ultimately, it leads to negligible electron pulse phase-space degradation compared to the incoming dc beam parameters. The temporal pulse length and repetition rate for the EMMP can be continuously tunable over wide ranges. Applying the EMMP to a transmission electron microscope (TEM) with any dc electron source (e.g. thermionic, Schottky, or field-emission source), a GHz stroboscopic high-duty-cycle TEM can be realized. Unlike in many recent developments in time-resolved TEM that rely on a sample pumping laser paired with a laser launching electrons from a photocathode to probe the sample, there is no laser in the presented experimental set-up. This is expected to be a significant relief for electron microscopists who are not familiar with laser systems. The EMMP and the sample are externally driven by a radiofrequency (RF) source synchronized through a delay line. With no laser pumping the sample, the problem of the pump laser induced residual heating/damaging the sample is eliminated. As many RF-driven processes can be cycled indefinitely, sampling rates of 1-50GHz become accessible. Such a GHz stroboscopic TEM would open up a new paradigm for in situ and in operando experiments to study samples externally driven electromagnetically. Complementary to the lower (MHz) repetition rates experiments enabled by laser photocathode TEM, new experiments in the multi-GHz regime will be enabled by the proposed RF design

  17. Thermal imaging for assessment of electron-beam freeform fabrication (EBF3) additive manufacturing deposits

    NASA Astrophysics Data System (ADS)

    Zalameda, Joseph N.; Burke, Eric R.; Hafley, Robert A.; Taminger, Karen M.; Domack, Christopher S.; Brewer, Amy; Martin, Richard E.

    2013-05-01

    Additive manufacturing is a rapidly growing field where 3-dimensional parts can be produced layer by layer. NASA's electron beam freeform fabrication (EBF3) technology is being evaluated to manufacture metallic parts in a space environment. The benefits of EBF3 technology are weight savings to support space missions, rapid prototyping in a zero gravity environment, and improved vehicle readiness. The EBF3 system is composed of 3 main components: electron beam gun, multi-axis position system, and metallic wire feeder. The electron beam is used to melt the wire and the multi-axis positioning system is used to build the part layer by layer. To insure a quality deposit, a near infrared (NIR) camera is used to image the melt pool and solidification areas. This paper describes the calibration and application of a NIR camera for temperature measurement. In addition, image processing techniques are presented for deposit assessment metrics.

  18. In Situ Transmission Electron Microscopy Study of Electron Beam-Induced Transformations in Colloidal Cesium Lead Halide Perovskite Nanocrystals.

    PubMed

    Dang, Zhiya; Shamsi, Javad; Palazon, Francisco; Imran, Muhammad; Akkerman, Quinten A; Park, Sungwook; Bertoni, Giovanni; Prato, Mirko; Brescia, Rosaria; Manna, Liberato

    2017-02-28

    An increasing number of studies have recently reported the rapid degradation of hybrid and all-inorganic lead halide perovskite nanocrystals under electron beam irradiation in the transmission electron microscope, with the formation of nanometer size, high contrast particles. The nature of these nanoparticles and the involved transformations in the perovskite nanocrystals are still a matter of debate. Herein, we have studied the effects of high energy (80/200 keV) electron irradiation on colloidal cesium lead bromide (CsPbBr3) nanocrystals with different shapes and sizes, especially 3 nm thick nanosheets, a morphology that facilitated the analysis of the various ongoing processes. Our results show that the CsPbBr3 nanocrystals undergo a radiolysis process, with electron stimulated desorption of a fraction of bromine atoms and the reduction of a fraction of Pb(2+) ions to Pb(0). Subsequently Pb(0) atoms diffuse and aggregate, giving rise to the high contrast particles, as previously reported by various groups. The diffusion is facilitated by both high temperature and electron beam irradiation. The early stage Pb nanoparticles are epitaxially bound to the parent CsPbBr3 lattice, and evolve into nonepitaxially bound Pb crystals upon further irradiation, leading to local amorphization and consequent dismantling of the CsPbBr3 lattice. The comparison among CsPbBr3 nanocrystals with various shapes and sizes evidences that the damage is particularly pronounced at the corners and edges of the surface, due to a lower diffusion barrier for Pb(0) on the surface than inside the crystal and the presence of a larger fraction of under-coordinated atoms.

  19. In Situ Transmission Electron Microscopy Study of Electron Beam-Induced Transformations in Colloidal Cesium Lead Halide Perovskite Nanocrystals

    PubMed Central

    2017-01-01

    An increasing number of studies have recently reported the rapid degradation of hybrid and all-inorganic lead halide perovskite nanocrystals under electron beam irradiation in the transmission electron microscope, with the formation of nanometer size, high contrast particles. The nature of these nanoparticles and the involved transformations in the perovskite nanocrystals are still a matter of debate. Herein, we have studied the effects of high energy (80/200 keV) electron irradiation on colloidal cesium lead bromide (CsPbBr3) nanocrystals with different shapes and sizes, especially 3 nm thick nanosheets, a morphology that facilitated the analysis of the various ongoing processes. Our results show that the CsPbBr3 nanocrystals undergo a radiolysis process, with electron stimulated desorption of a fraction of bromine atoms and the reduction of a fraction of Pb2+ ions to Pb0. Subsequently Pb0 atoms diffuse and aggregate, giving rise to the high contrast particles, as previously reported by various groups. The diffusion is facilitated by both high temperature and electron beam irradiation. The early stage Pb nanoparticles are epitaxially bound to the parent CsPbBr3 lattice, and evolve into nonepitaxially bound Pb crystals upon further irradiation, leading to local amorphization and consequent dismantling of the CsPbBr3 lattice. The comparison among CsPbBr3 nanocrystals with various shapes and sizes evidences that the damage is particularly pronounced at the corners and edges of the surface, due to a lower diffusion barrier for Pb0 on the surface than inside the crystal and the presence of a larger fraction of under-coordinated atoms. PMID:28122188

  20. Novel method for measurement of transistor gate length using energy-filtered transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Lee, Sungho; Kim, Tae-Hoon; Kang, Jonghyuk; Yang, Cheol-Woong

    2016-12-01

    As the feature size of devices continues to decrease, transmission electron microscopy (TEM) is becoming indispensable for measuring the critical dimension (CD) of structures. Semiconductors consist primarily of silicon-based materials such as silicon, silicon dioxide, and silicon nitride, and the electrons transmitted through a plan-view TEM sample provide diverse information about various overlapped silicon-based materials. This information is exceedingly complex, which makes it difficult to clarify the boundary to be measured. Therefore, we propose a simple measurement method using energy-filtered TEM (EF-TEM). A precise and effective measurement condition was obtained by determining the maximum value of the integrated area ratio of the electron energy loss spectrum at the boundary to be measured. This method employs an adjustable slit allowing only electrons with a certain energy range to pass. EF-TEM imaging showed a sharp transition at the boundary when the energy-filter’s passband centre was set at 90 eV, with a slit width of 40 eV. This was the optimum condition for the CD measurement of silicon-based materials involving silicon nitride. Electron energy loss spectroscopy (EELS) and EF-TEM images were used to verify this method, which makes it possible to measure the transistor gate length in a dynamic random access memory manufactured using 35 nm process technology. This method can be adapted to measure the CD of other non-silicon-based materials using the EELS area ratio of the boundary materials.

  1. Health Level Seven (HL7): standard for healthcare electronic data transmissions.

    PubMed

    Hettinger, B J; Brazile, R P

    1994-01-01

    The nursing profession needs computer-formatted data that can be exchanged within and between agencies. The exchange of electronic data, both in the United States and in the international community, requires agreement on the format of the data elements to be exchanged. The Health Level Seven (HL7) standard is a proposed voluntary standard for healthcare applications that addresses the way information is exchanged electronically. This brief article will provide background information regarding the development and status of HL7 and its implications for nursing. From the clinical perspective, nurses follow standards of care developed by professional organizations. These standards facilitate clear communication among nurses, consumers, and members of other disciplines. Similarly, the electronic transmission and exchange of clinical information must have a standard to ensure that messages arrive and are decoded correctly. Many standards for electronic data already exist; financial transactions such as banking are familiar examples. The theme of the 1990 Symposium on Computer Applications in Medical Care (SCAMC), was Standards in Medical Informatics. Many pertinent papers and workshops were presented. However, references to electronic data standards are found primarily in conference proceedings and technical manuals. Thus, although activity is widespread, and events are rapidly moving in the healthcare industry, most of the information is not yet widely available. It seems timely, therefore, to provide background material to nurses in order for them to participate in the process.

  2. Strain mapping at the nanoscale using precession electron diffraction in transmission electron microscope with off axis camera

    SciTech Connect

    Vigouroux, M. P.; Delaye, V.; Bernier, N.; Lafond, D.; Audoit, G.; Bertin, F.; Cipro, R.; Baron, T.; Martin, M.; Rouvière, J. L.; Chenevier, B.

    2014-11-10

    Precession electron diffraction is an efficient technique to measure strain in nanostructures by precessing the electron beam, while maintaining a few nanometre probe size. Here, we show that an advanced diffraction pattern treatment allows reproducible and precise strain measurements to be obtained using a default 512 × 512 DigiSTAR off-axis camera both in advanced or non-corrected transmission electron microscopes. This treatment consists in both projective geometry correction of diffraction pattern distortions and strain Delaunay triangulation based analysis. Precision in the strain measurement is improved and reached 2.7 × 10{sup −4} with a probe size approaching 4.2 nm in diameter. This method is applied to the study of the strain state in InGaAs quantum-well (QW) devices elaborated on Si substrate. Results show that the GaAs/Si mismatch does not induce in-plane strain fluctuations in the InGaAs QW region.

  3. Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine): structure and electron irradiation effects.

    PubMed

    Gontard, Lionel C; Fernández, Asunción; Dunin-Borkowski, Rafal E; Kasama, Takeshi; Lozano-Pérez, Sergio; Lucas, Stéphane

    2014-12-01

    Hybrid (organic shell-inorganic core) nanoparticles have important applications in nanomedicine. Although the inorganic components of hybrid nanoparticles can be characterized readily using conventional transmission electron microscopy (TEM) techniques, the structural and chemical arrangement of the organic molecular components remains largely unknown. Here, we apply TEM to the physico-chemical characterization of Au nanoparticles that are coated with plasma-polymerized-allylamine, an organic compound with the formula C3H5NH2. We discuss the use of energy-filtered TEM in the low-energy-loss range as a contrast enhancement mechanism for imaging the organic shells of such particles. We also study electron-beam-induced crystallization and amorphization of the shells and the formation of graphitic-like layers that contain both C and N. The resistance of the samples to irradiation by high-energy electrons, which is relevant for optical tuning and for understanding the degree to which such hybrid nanostructures are stable in the presence of biomedical radiation, is also discussed.

  4. Image transfer with spatial coherence for aberration corrected transmission electron microscopes.

    PubMed

    Hosokawa, Fumio; Sawada, Hidetaka; Shinkawa, Takao; Sannomiya, Takumi

    2016-08-01

    The formula of spatial coherence involving an aberration up to six-fold astigmatism is derived for aberration-corrected transmission electron microscopy. Transfer functions for linear imaging are calculated using the newly derived formula with several residual aberrations. Depending on the symmetry and origin of an aberration, the calculated transfer function shows characteristic symmetries. The aberrations that originate from the field's components, having uniformity along the z direction, namely, the n-fold astigmatism, show rotational symmetric damping of the coherence. The aberrations that originate from the field's derivatives with respect to z, such as coma, star, and three lobe, show non-rotational symmetric damping. It is confirmed that the odd-symmetric wave aberrations have influences on the attenuation of an image via spatial coherence. Examples of image simulations of haemoglobin and Si [211] are shown by using the spatial coherence for an aberration-corrected electron microscope.

  5. On the optical stability of high-resolution transmission electron microscopes.

    PubMed

    Barthel, J; Thust, A

    2013-11-01

    In the recent two decades the technique of high-resolution transmission electron microscopy experienced an unprecedented progress through the introduction of hardware aberration correctors and by the improvement of the achievable resolution to the sub-Ångström level. The important aspect that aberration correction at a given resolution requires also a well defined amount of optical stability has received little attention so far. Therefore we investigate the qualification of a variety of high-resolution electron microscopes to maintain an aberration corrected optical state in terms of an optical lifetime. We develop a comprehensive statistical framework for the estimation of the optical lifetime and find remarkably low values between tens of seconds and a couple of minutes. Probability curves are introduced, which inform the operator about the chance to work still in the fully aberration corrected state.

  6. Detection of pharmaceutical crystals in polymer particles by transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Ricarte, Ralm; Hillmyer, Marc; Lodge, Timothy

    2015-03-01

    The use of solid dispersions, blends of an active pharmaceutical ingredient (API) and a polymer excipient, may significantly enhance the dissolution performance of a poorly water soluble drug. However, the polymer's role in inhibiting API crystallization within the solid dispersion is not well understood. One of the main challenges in elucidating this mechanism is the difficulty of detecting small amounts of API crystals (less than 5 volume percent) within the polymer matrix. In this work, we explore the use of transmission electron microscopy (TEM) to characterize the crystallinity of griseofulvin (GF) in hydroxypropyl methylcellulose acetate succinate (HPMCAS) solid dispersions. Using both real-space images and electron diffraction patterns from TEM, GF crystals in the HPMCAS matrix were unambiguously identified with nanometer resolution and with a crystal detection sensitivity superior to both wide-angle X-ray scattering and differential scanning calorimetry. TEM shows great potential for characterizing even trace API crystallinity in solid polymeric dispersions.

  7. Local temperature measurements on nanoscale materials using a movable nanothermocouple assembled in a transmission electron microscope

    NASA Astrophysics Data System (ADS)

    Kawamoto, Naoyuki; Wang, Ming-Sheng; Wei, Xianlong; Tang, Dai-Ming; Murakami, Yasukazu; Shindo, Daisuke; Mitome, Masanori; Golberg, Dmitri

    2011-12-01

    A nanoscale thermocouple consisting of merged Cu and Cu-Ni tips is developed for local temperature measurements on advanced nanomaterials by using a probing technique in a high-resolution transmission electron microscope (TEM) equipped with a double probe scanning tunneling microcopy (STM) unit. The fabricated nanothermocouple works as the so-called T-type thermocouple and displays a quick response and high spatial and thermal resolutions. A generated thermoelectromotive force which reflects rapid temperature changes controlled by electron beam intensity alternations on a metal nanoelectrode proves the technique's usefulness for high-precision local temperature measurements. The developed method demonstrates the effectiveness while also measuring temperature changes in Joule heated multi-walled carbon nanotubes (CNTs) and in a modeled electrical conductive composite nanosystem.

  8. Local crystal structure analysis with 10-pm accuracy using scanning transmission electron microscopy.

    PubMed

    Saito, Mitsuhiro; Kimoto, Koji; Nagai, Takuro; Fukushima, Shun; Akahoshi, Daisuke; Kuwahara, Hideki; Matsui, Yoshio; Ishizuka, Kazuo

    2009-06-01

    We demonstrate local crystal structure analysis based on annular dark-field (ADF) imaging in scanning transmission electron microscopy (STEM). Using a stabilized STEM instrument and customized software, we first realize high accuracy of elemental discrimination and atom-position determination with a 10-pm-order accuracy, which can reveal major cation displacements associated with a variety of material properties, e.g. ferroelectricity and colossal magnetoresistivity. A-site ordered/disordered perovskite manganites Tb(0.5)Ba(0.5)MnO(3) are analysed; A-site ordering and a Mn-site displacement of 12 pm are detected in each specific atomic column. This method can be applied to practical and advanced materials, e.g. strongly correlated electron materials.

  9. Scanning moiré fringe imaging by scanning transmission electron microscopy.

    PubMed

    Su, Dong; Zhu, Yimei

    2010-02-01

    A type of artificial contrast found in annular dark-field imaging is generated by spatial interference between the scanning grating of the electron beam and the specimen atomic lattice. The contrast is analogous to moiré fringes observed in conventional transmission electron microscopy. We propose using this scanning interference for retrieving information about the atomic lattice structure at medium magnifications. Compared with the STEM atomic imaging at high magnifications, this approach might have several advantages including easy observation of lattice discontinuities and reduction of image degradation from carbon contamination and beam damage. Application of the technique to reveal the Burgers vector of misfit dislocations at the interface of epitaxial films is demonstrated and its potential for studying strain fields is discussed.

  10. Characterization of ionic permeability and water vapor transmission rate of polymers used for implantable electronics.

    PubMed

    Kirsten, Sabine; Schubert, Martin; Uhlemann, Jürgen; Wolter, Klaus-Jurgen

    2014-01-01

    Biocompatible polymers used as encapsulation and packaging materials for implantable electronic devices have to comply with numerous requirements. Especially their barrier properties against water molecules and ions are of particular interest regarding the reliability of the encapsulation as well as functional integrity of the electronic components since water and ions on the circuit board may evoke corrosion, leakage current and finally the failure of the device. This paper describes a measurement setup to investigate the ionic permeability under in vitro conditions of polymeric membranes manufactured from various biocompatible polymers. Ionic permeability and water vapor transmission rate representing the barrier properties of these membranes were investigated. First results were obtained for polyimide, silicone, polyether ether ketone and polyamide, whereas polyimide evinced the best properties.

  11. The use of transmission electron microscopy in the quantification of nanoparticle dose

    NASA Astrophysics Data System (ADS)

    Hondow, N.; Brydson, R.; Brown, A.

    2014-06-01

    There are an increasing number of potential applications for nanoparticles in clinical medicine, including targeted drug delivery and contrast agents for biomedical imaging. Current in vitro studies are concerned with the biological impact of nanoparticles, with electron microscopy commonly employed to image their intracellular location. It is critical to quantify the absolute nanoparticle dose internalized by cells in a given exposure, and to understand the factors which affect this. In this work we are aiming to develop a full quantitative description of quantum dot uptake by an in vitro cell line. Transmission electron microscopy of thin cell sections provides the location and number of cellular vesicles per 2-D cell slice plus the number of quantum dots per vesicle. These results can then be correlated to other techniques to quantify the internalized nanoparticle dose distribution for whole cells.

  12. The structure of Escherichia coli signal recognition particle revealed by scanning transmission electron microscopy.

    PubMed

    Mainprize, Iain L; Beniac, Daniel R; Falkovskaia, Elena; Cleverley, Robert M; Gierasch, Lila M; Ottensmeyer, F Peter; Andrews, David W

    2006-12-01

    Structural studies on various domains of the ribonucleoprotein signal recognition particle (SRP) have not converged on a single complete structure of bacterial SRP consistent with the biochemistry of the particle. We obtained a three-dimensional structure for Escherichia coli SRP by cryoscanning transmission electron microscopy and mapped the internal RNA by electron spectroscopic imaging. Crystallographic data were fit into the SRP reconstruction, and although the resulting model differed from previous models, they could be rationalized by movement through an interdomain linker of Ffh, the protein component of SRP. Fluorescence resonance energy transfer experiments determined interdomain distances that were consistent with our model of SRP. Docking our model onto the bacterial ribosome suggests a mechanism for signal recognition involving interdomain movement of Ffh into and out of the nascent chain exit site and suggests how SRP could interact and/or compete with the ribosome-bound chaperone, trigger factor, for a nascent chain during translation.

  13. Cellulose Nanocrystals as Chiral Inducers: Enantioselective Catalysis and Transmission Electron Microscopy 3D Characterization.

    PubMed

    Kaushik, Madhu; Basu, Kaustuv; Benoit, Charles; Cirtiu, Ciprian M; Vali, Hojatollah; Moores, Audrey

    2015-05-20

    Cellulose nanocrystals (CNCs), derived from cellulose, provide us with an opportunity to devise more sustainable solutions to current technological challenges. Enantioselective catalysis, especially heterogeneous, is the preferred method for the synthesis of pure chiral molecules in the fine chemical industries. Cellulose has been long sought as a chiral inducer in enantioselective catalysis. We report herein an unprecedentedly high enantiomeric excess (ee) for Pd patches deposited onto CNCs used as catalysts for the hydrogenation of prochiral ketones in water at room temperature and 4 bar H2. Our system, where CNCs acted as support and sole chiral source, achieved an ee of 65% with 100% conversions. Cryo-electron microscopy, high-resolution transmission electron microscopy, and tomography were used for the first time to study the 3D structure of a metal functionalized CNC hybrid. It established the presence of sub-nanometer-thick Pd patches at the surface of CNCs and provided insight into the chiral induction mechanism.

  14. Switching behaviour of individual Ag-TCNQ nanowires: an in situ transmission electron microscopy study

    NASA Astrophysics Data System (ADS)

    Ran, Ke; Rösner, Benedikt; Butz, Benjamin; Fink, Rainer H.; Spiecker, Erdmann

    2016-10-01

    The organic semiconductor silver-tetracyanoquinodimethane (Ag-TCNQ) exhibits electrical switching and memory characteristics. Employing a scanning tunnelling microscopy setup inside a transmission electron microscope, the switching behaviour of individual Ag-TCNQ nanowires (NWs) is investigated in detail. For a large number of NWs, the switching between a high (OFF) and a low (ON) resistance state was successfully stimulated by negative bias sweeps. Fitting the experimental I-V curves with a Schottky emission function makes the switching features prominent and thus enables a direct evaluation of the switching process. A memory cycle including writing, reading and erasing features is demonstrated at an individual NW. Moreover, electronic failure mechanisms due to Joule heating are discussed. These findings have a significant impact on our understanding of the switching behaviour of Ag-TCNQ.

  15. Unscrambling Mixed Elements using High Angle Annular Dark Field Scanning Transmission Electron Microscopy

    NASA Astrophysics Data System (ADS)

    van den Bos, Karel H. W.; De Backer, Annick; Martinez, Gerardo T.; Winckelmans, Naomi; Bals, Sara; Nellist, Peter D.; Van Aert, Sandra

    2016-06-01

    The development of new nanocrystals with outstanding physicochemical properties requires a full three-dimensional (3D) characterization at the atomic scale. For homogeneous nanocrystals, counting the number of atoms in each atomic column from high angle annular dark field scanning transmission electron microscopy images has been shown to be a successful technique to get access to this 3D information. However, technologically important nanostructures often consist of more than one chemical element. In order to extend atom counting to heterogeneous materials, a new atomic lensing model is presented. This model takes dynamical electron diffraction into account and opens up new possibilities for unraveling the 3D composition at the atomic scale. Here, the method is applied to determine the 3D structure of Au@Ag core-shell nanorods, but it is applicable to a wide range of heterogeneous complex nanostructures.

  16. Atomic Resolution Imaging at an Ultralow Accelerating Voltage by a Monochromatic Transmission Electron Microscope

    NASA Astrophysics Data System (ADS)

    Morishita, Shigeyuki; Mukai, Masaki; Suenaga, Kazu; Sawada, Hidetaka

    2016-10-01

    Transmission electron microscopy using low-energy electrons would be very useful for atomic resolution imaging of specimens that would be damaged at higher energies. However, the resolution at low voltages is degraded because of geometrical and chromatic aberrations. In the present study, we diminish the effect of these aberrations by using a delta-type corrector and a monochromator. The dominant residual aberration in a delta-type corrector, which is the sixth-order three-lobe aberration, is counterbalanced by other threefold aberrations. Defocus spread caused by chromatic aberration is reduced by using a monochromated beam with an energy spread of 0.05 eV. We obtain images of graphene and demonstrate atomic resolution at an ultralow accelerating voltage of 15 kV.

  17. Accurate Nanoscale Crystallography in Real-Space Using Scanning Transmission Electron Microscopy.

    PubMed

    Dycus, J Houston; Harris, Joshua S; Sang, Xiahan; Fancher, Chris M; Findlay, Scott D; Oni, Adedapo A; Chan, Tsung-Ta E; Koch, Carl C; Jones, Jacob L; Allen, Leslie J; Irving, Douglas L; LeBeau, James M

    2015-08-01

    Here, we report reproducible and accurate measurement of crystallographic parameters using scanning transmission electron microscopy. This is made possible by removing drift and residual scan distortion. We demonstrate real-space lattice parameter measurements with <0.1% error for complex-layered chalcogenides Bi2Te3, Bi2Se3, and a Bi2Te2.7Se0.3 nanostructured alloy. Pairing the technique with atomic resolution spectroscopy, we connect local structure with chemistry and bonding. Combining these results with density functional theory, we show that the incorporation of Se into Bi2Te3 causes charge redistribution that anomalously increases the van der Waals gap between building blocks of the layered structure. The results show that atomic resolution imaging with electrons can accurately and robustly quantify crystallography at the nanoscale.

  18. Unscrambling Mixed Elements using High Angle Annular Dark Field Scanning Transmission Electron Microscopy.

    PubMed

    van den Bos, Karel H W; De Backer, Annick; Martinez, Gerardo T; Winckelmans, Naomi; Bals, Sara; Nellist, Peter D; Van Aert, Sandra

    2016-06-17

    The development of new nanocrystals with outstanding physicochemical properties requires a full three-dimensional (3D) characterization at the atomic scale. For homogeneous nanocrystals, counting the number of atoms in each atomic column from high angle annular dark field scanning transmission electron microscopy images has been shown to be a successful technique to get access to this 3D information. However, technologically important nanostructures often consist of more than one chemical element. In order to extend atom counting to heterogeneous materials, a new atomic lensing model is presented. This model takes dynamical electron diffraction into account and opens up new possibilities for unraveling the 3D composition at the atomic scale. Here, the method is applied to determine the 3D structure of Au@Ag core-shell nanorods, but it is applicable to a wide range of heterogeneous complex nanostructures.

  19. A study of Sn addition on bonding arrangement of Se-Te alloys using far infrared transmission spectroscopy

    NASA Astrophysics Data System (ADS)

    Kumar, Rajneesh; Sharma, Parikshit; Katyal, S. C.; Sharma, Pankaj; Rangra, V. S.

    2011-07-01

    Far infrared transmission spectra of Se92Te8-xSnx (x = 0, 1, 2, 3, 4, 5) glassy alloys are obtained in the spectral range 50-600 cm-1 at room temperature. The results are interpreted in terms of the vibrations of the isolated molecular units in such a way so as to preserve fourfold and twofold coordination for Sn and chalcogen atoms (Se,Te), respectively. With the addition of Sn, Far-IR spectra shift toward high frequency side and some new bands start appearing. Sn atoms appear to substitute for the selenium atoms in the outrigger sites due to large bond formation probability. Theoretical calculations of bond energy, relative probability of bond formation, force constant, and wave number were also made to justify the result.

  20. Investigation of diesel ash particulate matter: A scanning electron microscope and transmission electron microscope study

    NASA Astrophysics Data System (ADS)

    Liati, A.; Dimopoulos Eggenschwiler, P.; Müller Gubler, E.; Schreiber, D.; Aguirre, M.

    2012-03-01

    Investigation of ash PM deposited in a diesel particulate filter (DPF) operating on a light truck by means of SEM and TEM reveals the following: ash inside the DPF occurs in form of chemically very inhomogeneous, mostly brittle agglomerates accumulated at the plugged ends of inlet channels and deposited directly on the inlet channel walls all along the filter length. Ash agglomerates occur within pores of the channel walls. A minor part of ash PM may escape to the atmosphere. The individual ash phases are mostly crystalline with round outlines and sizes between ca. 170 and 60 nm, down to 7-12 nm, that is far below the breathable size range PM10. Aggregation of the predominantly finest fraction of ash particles leads to densification, which may translate to fewer breakouts from the DPF. EDX mapping and chemical analyses of the bulk ash reveal that ash consists mainly of Ca, Mg, P, Zn, S, O and minor Fe, Al and Si. Based on TEM diffraction data of ash single phases, combined with data on their chemistry, the diversity of ash phases is higher than previously presumed. Comparison with the ash particles of a heavily used DPF from a passenger car operating with Fe-based fuel-borne additives reveals characteristics very similar to those found for the light truck DPF with a tendency to generally lower sizes of the participating phases, mostly between 30 and 60 nm. 4-40 nm large, locally abundant Pt particles deriving from the coating material of the diesel oxidation catalyst (DOC) upstream the DPF occur within ash agglomerates of both DPFs. Ash collected from the exhaust gas at the exit of the light truck DPF under normal engine operation reveals that some fine particles, as well as a few of the larger (200-600 nm) ash-bearing agglomerates escape filtration. Very fine ash particles are reaching the atmosphere also attached onto soot agglomerates.

  1. Deformation mechanisms in free-standing nanoscale thin films: a quantitative in situ transmission electron microscope study.

    PubMed

    Haque, M A; Saif, M T A

    2004-04-27

    We have added force and displacement measurement capabilities in the transmission electron microscope (TEM) for in situ quantitative tensile experimentation on nanoscale specimens. Employing the technique, we measured the stress-strain response of several nanoscale free-standing aluminum and gold films subjected to several loading and unloading cycles. We observed low elastic modulus, nonlinear elasticity, lack of work hardening, and macroscopically brittle nature in these metals when their average grain size is 50 nm or less. Direct in situ TEM observation of the absence of dislocations in these films even at high stresses points to a grain-boundary-based mechanism as a dominant contributing factor in nanoscale metal deformation. When grain size is larger, the same metals regain their macroscopic behavior. Addition of quantitative capability makes the TEM a versatile tool for new fundamental investigations on materials and structures at the nanoscale.

  2. Cation-Dependent Hierarchical Assembly of U60 Nanoclusters into Macro-Ion Assemblies Imaged via Cryogenic Transmission Electron Microscopy.

    PubMed

    Soltis, Jennifer A; Wallace, Christine M; Penn, R Lee; Burns, Peter C

    2016-01-13

    Self-assembly of ([UO2(O2)OH]60)(60-) (U60), an actinide polyoxometalate with fullerene topology, can be induced by the addition of mono- and divalent cations to aqueous U60 solutions. Dynamic light scattering and small-angle X-ray scattering lend important insights into assembly in this system, but direct imaging of U60 and its assemblies via transmission electron microscopy (TEM) has remained an elusive goal. In this work, we used cryogenic TEM to image U60 and secondary and tertiary assemblies of U60 to characterize the size, morphology, and rate of formation of the secondary and tertiary structures. The kinetics and final morphologies of the secondary and tertiary structures strongly depend on the cation employed, with monovalent cations (Na(+) and K(+)) leading to the highest rates and largest secondary and tertiary structures.

  3. Deformation mechanisms in free-standing nanoscale thin films: A quantitative in situ transmission electron microscope study

    PubMed Central

    Haque, M. A.; Saif, M. T. A.

    2004-01-01

    We have added force and displacement measurement capabilities in the transmission electron microscope (TEM) for in situ quantitative tensile experimentation on nanoscale specimens. Employing the technique, we measured the stress–strain response of several nanoscale free-standing aluminum and gold films subjected to several loading and unloading cycles. We observed low elastic modulus, nonlinear elasticity, lack of work hardening, and macroscopically brittle nature in these metals when their average grain size is 50 nm or less. Direct in situ TEM observation of the absence of dislocations in these films even at high stresses points to a grain-boundary-based mechanism as a dominant contributing factor in nanoscale metal deformation. When grain size is larger, the same metals regain their macroscopic behavior. Addition of quantitative capability makes the TEM a versatile tool for new fundamental investigations on materials and structures at the nanoscale. PMID:15084745

  4. High resolution Transmission Electron Microscopy characterization of a milled oxide dispersion strengthened steel powder

    NASA Astrophysics Data System (ADS)

    Loyer-Prost, M.; Merot, J.-S.; Ribis, J.; Le Bouar, Y.; Chaffron, L.; Legendre, F.

    2016-10-01

    Oxide Dispersion Strengthened (ODS) steels are promising materials for generation IV fuel claddings as their dense nano-oxide dispersion provides good creep and irradiation resistance. Even if they have been studied for years, the formation mechanism of these nano-oxides is still unclear. Here we report for the first time a High Resolution Transmission Electron Microscopy and Energy Filtered Transmission Electron Microscopy characterization of an ODS milled powder. It provides clear evidence of the presence of small crystalline nanoclusters (NCs) enriched in titanium directly after milling. Small NCs (<5 nm) have a crystalline structure and seem partly coherent with the matrix. They have an interplanar spacing close to the (011) bcc iron structure. They coexist with larger crystalline spherical precipitates of 15-20 nm in size. Their crystalline structure may be metastable as they are not consistent with any Y-Ti-O or Ti-O structure. Such detailed observations in the as-milled grain powder confirm a mechanism of Y, Ti, O dissolution in the ferritic matrix followed by a NC precipitation during the mechanical alloying process of ODS materials.

  5. The formation and interpretation of defect images from crystalline materials in a scanning transmission electron microscope.

    PubMed

    Maher, D M; Joy, D C

    1976-06-01

    The technique of scanning transmission electron microscopy (STEM) has been employed usefully in studies of amorphous materials, and the theory of image formation and interpretation in this case has been well developed. Less attention has been given to the practical and theoretical problems associated with the use of STEM for the examination of crystalline materials. In this case the contrast mechanisms are dominated by Bragg diffraction and so they are quite different from those occurring in amorphous substances. In this paper practical techniques for the observation and interpretation of contrast from defects in crystalline materials are discussed. It is shown that whilst images of defects are obtained readily under all typical STEM operating conditions, the form of the image and the information it contains varies with the angle subtended at the specimen by the detector. If this angle is too large significant image modifications relative to the "conventional" transmission electron microscope case may occur and the resolution of the image may degrade. If this angle is too small, then signal to noise considerations make an interpretation of the image difficult. In this paper we indicate how the detector angle may be chosen correctly, and also present techniques for setting up a STEM instrument for imaging a crystalline material containing lattice defects.

  6. The examination of calcium ion implanted alumina with energy filtered transmission electron microscopy

    SciTech Connect

    Hunt, E.M.; Hampikian, J.M.; Evans, N.D.

    1997-04-01

    Ion implantation can be used to alter in the optical response of insulators through the formation of embedded nano-sized particles. Single crystal alumina has been implanted at ambient temperature with 50 keV Ca{sup +} to a fluence of 5 {times} 10{sup 16} ions/cm{sup 2}. Ion channeling, Knoop microhardness measurements, and transmission electron microscopy (TEM) indicate that the alumina surface layer was amorphized by the implant. TEM also revealed nano-sized crystals {approx}7--8 nm in diameter. These nanocrystals are randomly oriented, and exhibit a face-centered cubic structure (FCC) with a lattice parameter of 0.409 nm {+-} 0.002 nm. The similarity between this crystallography and that of pure aluminum suggests that they are metallic aluminum nanocrystals with a slightly dilated lattice parameter, possibly due to the incorporation of a small amount of calcium. Energy-filtered transmission electron microscopy (EFTEM) provides an avenue by which to confirm the metallic nature of the aluminum involved in the nanocrystals. EFTEM has confirmed that the aluminum present in the particles is metallic in nature, that the particles are oxygen deficient in comparison with the matrix material and that the particles are deficient in calcium, and therefore not likely to be calcia. The particles thus appear to be FCC Al (possibly alloyed with a few percent Ca) with a lattice parameter of 0.409nm. A similar result was obtained for yttrium ion implantation into alumina.

  7. Ultrastructural analysis of testicular tissue and sperm by transmission and scanning electron microscopy.

    PubMed

    Chemes, Hector E

    2013-01-01

    Transmission electron microscopy (TEM) studies have provided the basis for an in-depth understanding of the cell biology and normal functioning of the testis and male gametes and have opened the way to characterize the functional role played by specific organelles in spermatogenesis and sperm function. The development of the scanning electron microscope (SEM) extended these boundaries to the recognition of cell and organ surface features and the architectural array of cells and tissues. The merging of immunocytochemical and histochemical approaches with electron microscopy has completed a series of technical improvements that integrate structural and functional features to provide a broad understanding of cell biology in health and disease. With these advances the detailed study of the intricate structural and molecular organization as well as the chemical composition of cellular organelles is now possible. Immunocytochemistry is used to identify proteins or other components and localize them in specific cells or organelles with high specificity and sensitivity, and histochemistry can be used to understand their function (i.e., enzyme activity). When these techniques are used in conjunction with electron microscopy their resolving power is further increased to subcellular levels. In the present chapter we will describe in detail various ultrastructural techniques that are now available for basic or translational research in reproductive biology and reproductive medicine. These include TEM, ultrastructural immunocytochemistry, ultrastructural histochemistry, and SEM.

  8. In Situ Transmission Electron Microscopy Modulation of Transport in Graphene Nanoribbons

    PubMed Central

    2016-01-01

    In situ transmission electron microscopy (TEM) electronic transport measurements in nanoscale systems have been previously confined to two-electrode configurations. Here, we use the focused electron beam of a TEM to fabricate a three-electrode geometry from a continuous 2D material where the third electrode operates as side gate in a field-effect transistor configuration. Specifically, we demonstrate TEM nanosculpting of freestanding graphene sheets into graphene nanoribbons (GNRs) with proximal graphene side gates, together with in situ TEM transport measurements of the resulting GNRs, whose conductance is modulated by the side-gate potential. The TEM electron beam displaces carbon atoms from the graphene sheet, and its position is controlled with nanometer precision, allowing the fabrication of GNRs of desired width immediately prior to each transport measurement. We also model the corresponding electric field profile in this three-terminal geometry. The implementation of an in situ TEM three-terminal platform shown here further extends the use of a TEM for device characterization. This approach can be easily generalized for the investigation of other nanoscale systems (2D materials, nanowires, and single molecules) requiring the correlation of transport and atomic structure. PMID:27010816

  9. Quantitative atomic resolution mapping using high-angle annular dark field scanning transmission electron microscopy.

    PubMed

    Van Aert, S; Verbeeck, J; Erni, R; Bals, S; Luysberg, M; Van Dyck, D; Van Tendeloo, G

    2009-09-01

    A model-based method is proposed to relatively quantify the chemical composition of atomic columns using high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) images. The method is based on a quantification of the total intensity of the scattered electrons for the individual atomic columns using statistical parameter estimation theory. In order to apply this theory, a model is required describing the image contrast of the HAADF STEM images. Therefore, a simple, effective incoherent model has been assumed which takes the probe intensity profile into account. The scattered intensities can then be estimated by fitting this model to an experimental HAADF STEM image. These estimates are used as a performance measure to distinguish between different atomic column types and to identify the nature of unknown columns with good accuracy and precision using statistical hypothesis testing. The reliability of the method is supported by means of simulated HAADF STEM images as well as a combination of experimental images and electron energy-loss spectra. It is experimentally shown that statistically meaningful information on the composition of individual columns can be obtained even if the difference in averaged atomic number Z is only 3. Using this method, quantitative mapping at atomic resolution using HAADF STEM images only has become possible without the need of simultaneously recorded electron energy loss spectra.

  10. The probe profile and lateral resolution of scanning transmission electron microscopy of thick specimens.

    PubMed

    Demers, Hendrix; Ramachandra, Ranjan; Drouin, Dominique; de Jonge, Niels

    2012-06-01

    Lateral profiles of the electron probe of scanning transmission electron microscopy (STEM) were simulated at different vertical positions in a micrometers-thick carbon sample. The simulations were carried out using the Monte Carlo method in CASINO software. A model was developed to fit the probe profiles. The model consisted of the sum of a Gaussian function describing the central peak of the profile and two exponential decay functions describing the tail of the profile. Calculations were performed to investigate the fraction of unscattered electrons as a function of the vertical position of the probe in the sample. Line scans were also simulated over gold nanoparticles at the bottom of a carbon film to calculate the achievable resolution as a function of the sample thickness and the number of electrons. The resolution was shown to be noise limited for film thicknesses less than 1 μm. Probe broadening limited the resolution for thicker films. The validity of the simulation method was verified by comparing simulated data with experimental data. The simulation method can be used as quantitative method to predict STEM performance or to interpret STEM images of thick specimens.

  11. Unravelling surface and interfacial structures of a metal-organic framework by transmission electron microscopy.

    PubMed

    Zhu, Yihan; Ciston, Jim; Zheng, Bin; Miao, Xiaohe; Czarnik, Cory; Pan, Yichang; Sougrat, Rachid; Lai, Zhiping; Hsiung, Chia-En; Yao, Kexin; Pinnau, Ingo; Pan, Ming; Han, Yu

    2017-02-20

    Metal-organic frameworks (MOFs) are crystalline porous materials with designable topology, porosity and functionality, having promising applications in gas storage and separation, ion conduction and catalysis. It is challenging to observe MOFs with transmission electron microscopy (TEM) due to the extreme instability of MOFs upon electron beam irradiation. Here, we use a direct-detection electron-counting camera to acquire TEM images of the MOF ZIF-8 with an ultralow dose of 4.1 electrons per square ångström to retain the structural integrity. The obtained image involves structural information transferred up to 2.1 Å, allowing the resolution of individual atomic columns of Zn and organic linkers in the framework. Furthermore, TEM reveals important local structural features of ZIF-8 crystals that cannot be identified by diffraction techniques, including armchair-type surface terminations and coherent interfaces between assembled crystals. These observations allow us to understand how ZIF-8 crystals self-assemble and the subsequent influence of interfacial cavities on mass transport of guest molecules.

  12. Rapidly Alternating Transmission Mode Electron Transfer Dissociation and Collisional Activation for the Characterization of Polypeptide Ions

    PubMed Central

    Han, Hongling; Xia, Yu; Yang, Min; McLuckey, Scott A.

    2009-01-01

    Cation transmission/electron transfer reagent anion storage mode electron transfer ion/ion reactions and beam-type collisional activation of the polypeptide ions are performed in rapid succession in the high pressure collision cell (Q2) of a quadrupole/time-of-flight tandem mass spectrometer (QqTOF), where the electron transfer reagent anions are accumulated. Duty cycles for both electron transfer dissociation (ETD) and collision-induced dissociation (CID) experiments are improved relative to ion trapping approaches since there are no discrete ion storage and reaction steps for ETD experiments and no discrete ion storage step and frequency tuning for CID experiments. For this technique, moderately high resolution and mass accuracy are also obtained due to mass analysis via the TOF analyzer. This relatively simple approach has been demonstrated with a triply charged tryptic peptide, a triply charged tryptic phosphopeptide, and a triply charged tryptic N-linked glycopeptide. For the tryptic peptide, the sequence is identified with more certainty than would be available from a single method alone due to the complementary information provided by these two dissociation methods. Because of the complementary information derived from both ETD and CID dissociation methods, peptide sequence and post-translational modification (PTM) sites for the phosphopeptide are identified. This combined ETD and CID approach is particularly useful for characterizing glycopeptides because ETD generates information about both peptide sequence and locations of the glycosylation sites while CID provides information about the glycan structure. PMID:18396915

  13. Linear least-squares fit evaluation of series of analytical spectra from planar defects: extension and possible implementations in scanning transmission electron microscopy.

    PubMed

    Walther, T

    2006-08-01

    In a previous paper, a new technique was introduced to determine the chemistry of crystallographically well-defined planar defects (such as straight interfaces, grain boundaries, twins, inversion or antiphase domain boundaries) in the presence of homogeneous solute segregation or selective doping. The technique is based on a linear least-squares fit using series of analytical (electron energy-loss or energy-dispersive X-ray) spectra acquired in a transmission electron microscope that is operated in nano-probe mode with the planar defect centred edge-on. First, additional notes on the use of proper k-factors and determination of Gibbsian excess segregation are given in this note. Using simulated data sets, it is shown that the linear least-squares fit improves both the accuracy and the robustness to noise beyond that obtainable by independently repeated measurements. It is then shown how the method originally developed for a stationary nano-probe mode in transmission electron microscopy can be extended to a focused electron beam that scans a square region in scanning transmission electron microscopy. The necessary modifications to scan geometry and corresponding numerical evaluation are described, and three different practical implementations are proposed.

  14. Dynamic Processes in Biology, Chemistry, and Materials Science: Opportunities for UltraFast Transmission Electron Microscopy - Workshop Summary Report

    SciTech Connect

    Kabius, Bernd C.; Browning, Nigel D.; Thevuthasan, Suntharampillai; Diehl, Barbara L.; Stach, Eric A.

    2012-07-25

    mission. This workshop built on previous workshops and included three breakout sessions identifying scientific challenges in biology, biogeochemistry, catalysis, and materials science frontier areas of fundamental science that underpin energy and environmental science that would significantly benefit from ultrafast transmission electron microscopy (UTEM). In addition, the current status of time-resolved electron microscopy was examined, and the technologies that will enable future advances in spatio-temporal resolution were identified in a fourth breakout session.

  15. In Situ Environmental Cell-Transmission Electron Microscopy Study of Microbial Reduction of Chromium(VI) Using Electron Energy Loss Spectroscopy.

    PubMed

    Daulton, Tyrone L.; Little, Brenda J.; Lowe, Kristine; Jones-Meehan, Joanne

    2001-11-01

    Reduction of Cr(VI) by the bacterium, Shewanella oneidensis (previously classified Shewanella putrefaciens strain MR-1), was studied by absorption spectrophotometry and in situ, environmental cell-transmission electron microscopy (EC-TEM) coupled with electron energy loss spectroscopy (EELS). Bacteria from rinsed cultures were placed directly in the environmental cell of the transmission electron microscope and examined under 100 Torr pressure. Bright field EC-TEM images show two distinct populations of S. oneidensis in incubated cultures containing Cr(VI)O2- 4: those that exhibit low image contrast and heavily precipitate-encrusted cells exhibiting high image contrast. Several EELS techniques were applied to determine the oxidation state of Cr associated with encrusted cells. The encrusted cells are shown to contain a reduced form of Cr in oxidation state +3 or lower. These results demonstrate the capability to determine the chemistry and valence state of reduction products associated with unfixed, hydrated bacteria in an environmental cell transmission electron microscope.

  16. Measurement of vibrational spectrum of liquid using monochromated scanning transmission electron microscopy-electron energy loss spectroscopy.

    PubMed

    Miyata, Tomohiro; Fukuyama, Mao; Hibara, Akihide; Okunishi, Eiji; Mukai, Masaki; Mizoguchi, Teruyasu

    2014-10-01

    Investigations on the dynamic behavior of molecules in liquids at high spatial resolution are greatly desired because localized regions, such as solid-liquid interfaces or sites of reacting molecules, have assumed increasing importance with respect to improving material performance. In application to liquids, electron energy loss spectroscopy (EELS) observed with transmission electron microscopy (TEM) is a promising analytical technique with the appropriate resolutions. In this study, we obtained EELS spectra from an ionic liquid, 1-ethyl-3-methylimidazolium bis (trifluoromethyl-sulfonyl) imide (C2mim-TFSI), chosen as the sampled liquid, using monochromated scanning TEM (STEM). The molecular vibrational spectrum and the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap of the liquid were investigated. The HOMO-LUMO gap measurement coincided with that obtained from the ultraviolet-visible spectrum. A shoulder in the spectrum observed ∼0.4 eV is believed to originate from the molecular vibration. From a separately performed infrared observation and first-principles calculations, we found that this shoulder coincided with the vibrational peak attributed to the C-H stretching vibration of the [C2mim(+)] cation. This study demonstrates that a vibrational peak for a liquid can be observed using monochromated STEM-EELS, and leads one to expect observations of chemical reactions or aids in the analysis of the dynamic behavior of molecules in liquid.

  17. Properties of Inconel 625 Mesh Structures Grown by Electron Beam Additive Manufacturing

    SciTech Connect

    List III, Frederick Alyious; Dehoff, Ryan R; Lowe, Larry E; Sames, William J

    2014-01-01

    Relationships between electron beam parameters (beam current, beam speed, and beam focus) and physical properties (mass, diameter, elastic modulus, and yield strength) have been investigated for Inconel 625 mesh cubes fabricated using an additive manufacturing technology based on electron beam melting. The elastic modulus and yield strength of the mesh cubes have been systematically varied by approximately a factor of ten by changing the electron beam parameters. Simple models have been used to understand better these relationships. Structural anisotropies of the mesh associated with the layered build architecture have been observed and may contribute, along with microstructural anisotropies, to the anisotropic mechanical properties of the mesh. Knowledge of this kind is likely applicable to other metal and alloy systems and is essential to rapidly realize the full potential of this burgeoning technology.

  18. Transmission Electron Microscope Studies of Martian 'Iddingsite' in the Nakhlite Meteorite MIL 090032

    NASA Astrophysics Data System (ADS)

    Hallis, L.; Ishii, H.; Bradley, J. P.; Taylor, J.

    2012-12-01

    As with the other nakhlites, MIL 090032 contains iddingsite-like alteration veins in the olivine phenocrysts that reportedly originated on Mars[1]. These 'iddingsite' veins have been analysed in a number of the nakhlite meteorites[2], and the presence of hydrous silicate gel, smectite clays, siderite, Fe-oxides, gypsum and carbonate have been reported. The presence and proportion of these phases in the different nakhlites appears to relate to the composition and concentration of the martian brine that flowed through each, thus supporting the theory that the nakhlite secondary alteration phases were produced by an evaporation sequence on the surface of Mars[3]. We analyzed these martian 'iddingsite' veins in MIL 090032 with the aim of placing it and its three paired meteorites within the nakhlite alteration sequence. By expanding our knowledge of this alteration sequence, we will gain extra insight into the conditions on the martian surface at the time these 'iddingsite' veins formed (<1.3 Ga). We utilized the 80-300 kV aberration-corrected FEI Titan (Scanning) Transmission Electron Microscope (S-TEM) system at Lawrence Livermore National Laboratory to analyse a ~15×8μm Focused Ion Beam (FIB) section of an 'iddingsite' vein in MIL 090032. To allow the electrons to be transmitted through the FIB section, it was milled down to ~150 nm thickness. Our initial TEM data indicate this FIB section contains hydrous amorphous silicate gel towards the center, with areas of phyllosilicate (possibly nontronite) interspersed within this central zone. Towards the outer edge of the vein jarosite and then gypsum sulfates were present. At the very edge only partially broken down olivine was observed. The presence of phyllosilicate and silicate gel in this vein suggests the 'iddingsite' in MIL 090032 was produced by water-rich brine, and the abundance of sulfates suggests the brine was enriched in sulfur. This assemblage of minerals is most in line with that of the 'iddingsite

  19. Two-dimensional dopant analysis in silicon using chemical etching and transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Neogi, Suneeta Shamanna

    The purpose of this research has been to develop a methodologoy to map two-dimensional dopant distributions in silicon and investigate the factors that influence the interpretation of the results. The analysis exploits the image contrast obtained by transmission electron microscopy (TEM) using cross-section specimens which have undergone selective chemical etching. The appearance of iso-thickness contours in a selectively etched TEM sample must represent iso-concentration contours when imaged under constant diffraction conditions. The application of this technique is two-fold: (1) to establish a physical metrology of semiconductor devices for the purpose of research and development efforts that impact on future nodes outlined in the semiconductor roadmap and (2) to provide physical data for validation of simulation tools in technology computer aided design (TCAD). The research involves an investigation into the selective removal of doped regions for both test and device structures, followed by an analysis to obtain two-dimensional (2-D) dopant profiles. The critical issues which arise in the development of a methodology to profile dopant distributions and which are addressed in this investigation are, wedge technique versus conventional dimple and ion-mill procedures for thin-film preparation, thin-film versus bulk chemical etching, data acquisition using TEM and choice of diffraction conditions, sensitivity in terms of the etch detection limit, resolution influenced by the effective extinction length of the operating reflection, digital image processing to extract profiles from thickness contours, calibration of the 2-D profiles using a one-dimensional (1-D) calibrator and role of structure/dopant interactions such as stress, interfaces and point defects in test structures and real device structures containing additional processing sequences. Selective chemical etching in combination with TEM has the sensitivity, resolution and reproducibility required to be used

  20. Non-additive modulation of synaptic transmission by serotonin, adenosine, and cholinergic modulators in the sensory thalamus.

    PubMed

    Yang, Ya-Chin; Hu, Chun-Chang; Lai, Yi-Chen

    2015-01-01

    The thalamus relays sensory information to the cortex. Oscillatory activities of the thalamocortical network are modulated by monoamines, acetylcholine, and adenosine, and could be the key features characteristic of different vigilance states. Although the thalamus is almost always subject to the actions of more than just one neuromodulators, reports on the modulatory effect of coexisting neuromodulators on thalamic synaptic transmission are unexpectedly scarce. We found that, if present alone, monoamine or adenosine decreases retinothalamic synaptic strength and short-term depression, whereas cholinergic modulators generally enhance postsynaptic response to presynaptic activity. However, coexistence of different modulators tends to produce non-additive effect, not predictable based on the action of individual modulators. Acetylcholine, acting via nicotinic receptors, can interact with either serotonin or adenosine to abolish most short-term synaptic depression. Moreover, the coexistence of adenosine and monoamine, with or without acetylcholine, results in robustly decreased synaptic strength and transforms short-term synaptic depression to facilitation. These findings are consistent with a view that acetylcholine is essential for an "enriched" sensory flow through the thalamus, and the flow is trimmed down by concomitant monoamine or adenosine (presumably for the wakefulness and rapid-eye movement, or REM, sleep states, respectively). In contrast, concomitant adenosine and monoamine would lead to a markedly "deprived" (and high-pass filtered) sensory flow, and thus the dramatic decrease of monoamine may constitute the basic demarcation between non-REM and REM sleep. The collective actions of different neuromodulators on thalamic synaptic transmission thus could be indispensable for the understanding of network responsiveness in different vigilance states.

  1. Nucleation and growth of chimney pores during electron-beam additive manufacturing

    DOE PAGES

    Cordero, Zachary C.; Dinwiddie, Ralph B.; Immel, David; ...

    2016-12-05

    The nucleation and growth of chimney pores during powder-bed, electron-beam additive manufacturing is investigated using in-situ infrared thermography as well as microcomputed tomography of as-printed parts. The pores are found to nucleate at dimples on the part s surface, clearly demonstrating how process parameters can affect surface roughness, which can in turn affect the internal defect structure in an additive manufactured part. Based on the results of this study, several strategies for suppressing the formation of chimney pores are discussed.

  2. Electronic health records in rheumatology: emphasis on automated scoring and additional use.

    PubMed

    Richter, Jutta G; Chehab, Gamal; Schneider, Matthias

    2016-01-01

    Electronic health records are increasingly used and frequently required from various regulatory authorities. Apart from their day-to-day use by health care professionals for routine clinical practice and/or the improvement of quality of care processes, patients with chronic inflammatory disease may become increasingly involved in the data retrieval process by self-monitoring and providing patient-reported (outcome) data. Among key features of electronic health records are automated scoring, visualisation of validated measures, and long-term systematic patient-centered data collection in a structured and standardised manner. Data derived from electronic health records are increasingly incorporated into patient-centered research, registries, and other secondary uses. Thus, electronic health records offer opportunities to improve knowledge and to create new process flows in rheumatology health care. The article summarises some of these opportunities in patient care, as well as an overview of secondary use scenarios. In addition, the article focuses on patients' active involvement in the disease management process via health information applications, reports on patients' perspectives, as well as some legal and regulatory matters concerning electronic health records.

  3. Platinum blue as an alternative to uranyl acetate for staining in transmission electron microscopy.

    PubMed

    Inaga, Sumire; Katsumoto, Tetsuo; Tanaka, Keiichi; Kameie, Toshio; Nakane, Hironobu; Naguro, Tomonori

    2007-04-01

    This paper introduces an aqueous solution of platinum blue (Pt-blue) as an alternative to uranyl acetate (UA) for staining in transmission electron microscopy (TEM). Pt-blue was prepared from a reaction of cis-dichlorodiamine-platinum (II) (cis-platin) with thymidine. When Pt-blue was dried on a microgrid and observed by TEM it showed a uniform appearance with tiny particles less than 1 nm in diameter. The effect of Pt-blue as an electron stain was then examined not only for positive staining of conventional ultrathin resin sections and counterstaining of post-embedding immuno-electron microscopy but also for negative staining. In ultrathin sections of the rat liver and renal glomerulus, Pt-blue provided good contrast images, especially in double staining combined with a lead stain (Pb). Almost all cell organelles were clearly observed with high contrast in these sections. Glycogen granules in the hepatic parenchymal cells were particularly electron dense in Pt-blue stained sections compared with those treated with UA. In longitudinal and transverse sections of budding influenza A viruses, a specific arrangement of rod-like structures, which correspond to the ribonucleoprotein complexes, was clearly shown in each virion stained with Pt-blue and Pb. When post-embedding immunoelectron microscopy was performed in ultrathin sections of HeLa cells embedded in Lowicryl K4M, the localization of Ki-67 protein was sufficiently detected even after Pt-blue and Pb staining. The present study also revealed that Pt-blue could be used for the negative staining of E. coli, allowing the visualization of a flagellum. These findings indicate that Pt-blue is a useful, safe, and easily obtainable electron stain that is an alternative to UA for TEM preparations.

  4. Direct-write liquid phase transformations with a scanning transmission electron microscope

    DOE PAGES

    Unocic, Raymond R.; Lupini, Andrew R.; Borisevich, Albina Y.; ...

    2016-08-03

    The highly energetic electron beam from a scanning transmission electron microscope (STEM) can induce local changes in the state of matter, ranging from local knock-out and atomic movement, to amorphization/crystallization, and chemical/electrochemical reactions occuring at localized liquid-solid and gas-solid interfaces. To date, fundamental studies of e-beam induced phenomena and practical applications have been limited by conventional e-beam rastering modes that allow only for uniform e-beam exposures. Here we develop an automated liquid phase nanolithography method that is capable of directly writing nanometer scaled features within silicon nitride encapsulated liquid cells. An external beam control system, connected to the scan coilsmore » of an aberration-corrected STEM, is used to precisely control the position, dwell time, and scan velocity of a sub-nanometer STEM probe. Site-specific locations in a sealed liquid cell containing an aqueous solution of H2PdCl4 are irradiated to controllably deposit palladium onto silicon nitride membranes. We determine the threshold electron dose required for the radiolytic deposition of metallic palladium, explore the influence of electron dose on the feature size and morphology of nanolithographically patterned nanostructures, and propose a feedback-controlled monitoring method for active control of the nanofabricated structures through STEM detector signal monitoring. As a result, this approach enables both fundamental studies of electron beam induced interactions with matter, as well as opens a pathway to fabricate nanostructures with tailored architectures and chemistries via shape-controlled nanolithographic patterning from liquid phase precursors.« less

  5. Direct-write liquid phase transformations with a scanning transmission electron microscope

    SciTech Connect

    Unocic, Raymond R.; Lupini, Andrew R.; Borisevich, Albina Y.; Cullen, David A.; Kalinin, Sergei V.; Jesse, Stephen

    2016-08-03

    The highly energetic electron beam from a scanning transmission electron microscope (STEM) can induce local changes in the state of matter, ranging from local knock-out and atomic movement, to amorphization/crystallization, and chemical/electrochemical reactions occuring at localized liquid-solid and gas-solid interfaces. To date, fundamental studies of e-beam induced phenomena and practical applications have been limited by conventional e-beam rastering modes that allow only for uniform e-beam exposures. Here we develop an automated liquid phase nanolithography method that is capable of directly writing nanometer scaled features within silicon nitride encapsulated liquid cells. An external beam control system, connected to the scan coils of an aberration-corrected STEM, is used to precisely control the position, dwell time, and scan velocity of a sub-nanometer STEM probe. Site-specific locations in a sealed liquid cell containing an aqueous solution of H2PdCl4 are irradiated to controllably deposit palladium onto silicon nitride membranes. We determine the threshold electron dose required for the radiolytic deposition of metallic palladium, explore the influence of electron dose on the feature size and morphology of nanolithographically patterned nanostructures, and propose a feedback-controlled monitoring method for active control of the nanofabricated structures through STEM detector signal monitoring. As a result, this approach enables both fundamental studies of electron beam induced interactions with matter, as well as opens a pathway to fabricate nanostructures with tailored architectures and chemistries via shape-controlled nanolithographic patterning from liquid phase precursors.

  6. An in situ transmission electron microscopy study of the ion irradiation induced amorphisation of silicon by He and Xe

    DOE PAGES

    Edmondson, P. D.; Abrams, K. J.; Hinks, J. A.; ...

    2015-11-21

    We used transmission electron microscopy with in situ ion irradiation to examine the ion-beam-induced amorphisation of crystalline silicon under irradiation with light (He) and heavy (Xe) ions at room temperature. Analysis of the electron diffraction data reveal the heterogeneous amorphisation mechanism to be dominant in both cases. Moreover, for the differences in the amorphisation curves are discussed in terms of intra-cascade dynamic recovery, and the role of electronic and nuclear loss mechanisms.

  7. Nanoscale imaging of whole cells using a liquid enclosure and a scanning transmission electron microscope.

    PubMed

    Peckys, Diana B; Veith, Gabriel M; Joy, David C; de Jonge, Niels

    2009-12-14

    Nanoscale imaging techniques are needed to investigate cellular function at the level of individual proteins and to study the interaction of nanomaterials with biological systems. We imaged whole fixed cells in liquid state with a scanning transmission electron microscope (STEM) using a micrometer-sized liquid enclosure with electron transparent windows providing a wet specimen environment. Wet-STEM images were obtained of fixed E. coli bacteria labeled with gold nanoparticles attached to surface membrane proteins. Mammalian cells (COS7) were incubated with gold-tagged epidermal growth factor and fixed. STEM imaging of these cells resulted in a resolution of 3 nm for the gold nanoparticles. The wet-STEM method has several advantages over conventional imaging techniques. Most important is the capability to image whole fixed cells in a wet environment with nanometer resolution, which can be used, e.g., to map individual protein distributions in/on whole cells. The sample preparation is compatible with that used for fluorescent microscopy on fixed cells for experiments involving nanoparticles. Thirdly, the system is rather simple and involves only minimal new equipment in an electron microscopy (EM) laboratory.

  8. Transmission electron microscopy for the evaluation and optimization of crystal growth

    SciTech Connect

    Stevenson, Hilary P.; Lin, Guowu; Barnes, Christopher O.; Sutkeviciute, Ieva; Krzysiak, Troy; Weiss, Simon C.; Reynolds, Shelley; Wu, Ying; Nagarajan, Veeranagu; Makhov, Alexander M.; Lawrence, Robert; Lamm, Emily; Clark, Lisa; Gardella, Timothy J.; Hogue, Brenda G.; Ogata, Craig M.; Ahn, Jinwoo; Gronenborn, Angela M.; Conway, James F.; Vilardaga, Jean-Pierre; Cohen, Aina E.; Calero, Guillermo

    2016-04-26

    The crystallization of protein samples remains the most significant challenge in structure determination by X-ray crystallography. Here, the effectiveness of transmission electron microscopy (TEM) analysis to aid in the crystallization of biological macromolecules is demonstrated. It was found that the presence of well ordered lattices with higher order Bragg spots, revealed by Fourier analysis of TEM images, is a good predictor of diffraction-quality crystals. Moreover, the use of TEM allowed (i) comparison of lattice quality among crystals from different conditions in crystallization screens; (ii) the detection of crystal pathologies that could contribute to poor X-ray diffraction, including crystal lattice defects, anisotropic diffraction and crystal contamination by heavy protein aggregates and nanocrystal nuclei; (iii) the qualitative estimation of crystal solvent content to explore the effect of lattice dehydration on diffraction and (iv) the selection of high-quality crystal fragments for microseeding experiments to generate reproducibly larger sized crystals. Applications to X-ray free-electron laser (XFEL) and micro-electron diffraction (microED) experiments are also discussed.

  9. Sea Spray Aerosol Structure and Composition Using Cryogenic Transmission Electron Microscopy

    PubMed Central

    2016-01-01

    The composition and surface properties of atmospheric aerosol particles largely control their impact on climate by affecting their ability to uptake water, react heterogeneously, and nucleate ice in clouds. However, in the vacuum of a conventional electron microscope, the native surface and internal structure often undergo physicochemical rearrangement resulting in surfaces that are quite different from their atmospheric configurations. Herein, we report the development of cryogenic transmission electron microscopy where laboratory generated sea spray aerosol particles are flash frozen in their native state with iterative and controlled thermal and/or pressure exposures and then probed by electron microscopy. This unique approach allows for the detection of not only mixed salts, but also soft materials including whole hydrated bacteria, diatoms, virus particles, marine vesicles, as well as gel networks within hydrated salt droplets—all of which will have distinct biological, chemical, and physical processes. We anticipate this method will open up a new avenue of analysis for aerosol particles, not only for ocean-derived aerosols, but for those produced from other sources where there is interest in the transfer of organic or biological species from the biosphere to the atmosphere. PMID:26878061

  10. Quantifying Transient States in Materials with the Dynamic Transmission Electron Microscope

    SciTech Connect

    Campbell, G; LaGrange, T; Kim, J; Reed, B; Browning, N

    2009-09-21

    The Dynamic Transmission Electron Microscope (DTEM) offers a means of capturing rapid evolution in a specimen through in-situ microscopy experiments by allowing 15 ns electron micrograph exposure times. The rapid exposure time is enabled by creating a burst of electrons at the emitter by ultraviolet pulsed laser illumination. This burst arrives a specified time after a second laser initiates the specimen reaction. The timing of the two Q-switched lasers is controlled by high-speed pulse generators with a timing error much less than the pulse duration. Both diffraction and imaging experiments can be performed, just as in a conventional TEM. The brightness of the emitter and the total current control the spatial and temporal resolutions. We have demonstrated 7 nm spatial resolution in single 15 ns pulsed images. These single-pulse imaging experiments have been used to study martensitic transformations, nucleation and crystallization of an amorphous metal, and rapid chemical reactions. Measurements have been performed on these systems that are possible by no other experimental approaches currently available.

  11. Measured Radiation and Background Levels During Transmission of Megawatt Electron Beams Through Millimeter Apertures

    SciTech Connect

    Alarcon, Ricardo; Balascuta, S.; Benson, Stephen V.; Bertozzi, William; Boyce, James R.; Cowan, Ray; Douglas, David R.; Evtushenko, Pavel; Fisher, P.; Ihloff, Ernest E.; Kalantarians, Narbe; Kelleher, Aidan Michael; Krossler, W. J.; Legg, Robert A.; Long, Elena; Milner, Richard; Neil, George R.; Ou, Longwu; Schmookler, Barack Abraham; Tennant, Christopher D.; Tschalar, C.; Williams, Gwyn P.; Zhang, Shukui

    2013-11-01

    We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-off, but accelerating gradient RF-on, operation. These measurements were conducted at the Free-Electron Laser (FEL) facility of the Jefferson National Accelerator Laboratory (JLab) using a 100 MeV electron beam from an energy-recovery linear accelerator. The beam was directed successively through 6 mm, 4 mm, and 2 mm diameter apertures of length 127 mm in aluminum at a maximum current of 4.3 mA (430 kW beam power). This study was conducted to characterize radiation levels for experiments that need to operate in this environment, such as the proposed DarkLight Experiment. We find that sustained transmission of a 430 kW continuous-wave (CW) beam through a 2 mm aperture is feasible with manageable beam-related backgrounds. We also find that during beam-off, RF-on operation, multipactoring inside the niobium cavities of the accelerator cryomodules is the primary source of ambient radiation when the machine is tuned for 130 MeV operation.

  12. Nanoscale imaging of whole cells using a liquid enclosure and a scanning transmission electron microscopy

    SciTech Connect

    De Jonge, Niels; Peckys, Diana B; Veith, Gabriel M; Joy, David Charles

    2009-01-01

    Nanoscale imaging techniques are needed to investigate cellular function at the level of individual proteins and to study the interaction of nanomaterials with biological systems. We imaged whole fixed cells in liquid state with a scanning transmission electron microscope (STEM) using a micrometer-sized liquid enclosure with electron transparent windows providing a wet specimen environment. Wet-STEM images were obtained of fixed E. coli bacteria labeled with gold nanoparticles attached to surface membrane proteins. Mammalian cells (COS7) were incubated with gold-tagged epidermal growth factor and fixed. STEM imaging of these cells resulted in a resolution of 3 nm for the gold nanoparticles. The wet-STEM method has several advantages over conventional imaging techniques. Most important is the capability to image whole fixed cells in a wet environment with nanometer resolution, which can be used, e.g., to map individual protein distributions in/on whole cells. The sample preparation is compatible with that used for fluorescent microscopy on fixed cells for experiments involving nanoparticles. Thirdly, the system is rather simple and involves only minimal new equipment in an electron microscopy (EM) laboratory.

  13. Multislice simulation of transmission electron microscopy imaging of helium bubbles in Fe

    SciTech Connect

    Yao, Bo; Edwards, Danny J.; Kurtz, Richard J.; Odette, George R.; Yamamoto, Takuya

    2012-10-04

    Formation of nanoscale helium (He) bubbles in reduced activation ferritic/martensitic steels may lead to degradation of mechanical properties of materials. Transmission electron microscopy (TEM) has been commonly used to image the Fresnel contrast of He bubbles using a defocus of 0.5 µm ~ 1 µm. This paper presents our study of multislice simulation of the size correlation between imaged Fresnel rings and the actual He bubbles. It was found that for bubbles equal to or larger than 3 nm in diameter, the imaged bubble size, represented by its inner diameter of the first dark Fresnel ring (Din) in under-focused imaging conditions, increases with increasing electron-beam incoherency, but decreases with increasing defocus. The electron-beam accelerating voltage, bubble size, bubble position, and TEM sample thickness were found to have no significant influence on the deviation of Din from the actual bubble size (D0). For bubbles equal to or smaller than 2 nm, however, Din/Do increases dramatically with increasing defocus when it is above a threshold defocus. It was also suggested by this study that He bubbles can be differentiated from argon (Ar) bubbles by contrast differences.

  14. Total coliphages removal by activated sludge process and their morphological diversity by transmission electron microscopy.

    PubMed

    Jebri, Sihem; Hmaied, Fatma; Yahya, Mariem; Ben Ammar, Aouatef; Hamdi, Moktar

    This study was conducted to isolate phages in treated sewage collected from wastewater treatment plant, and explore their morphological diversity by transmission electron microscopy (TEM). Fates of total bacteriophages and their reduction by biological treatment were also assayed. Phages were isolated using the plaque assay then negatively stained and observed by electron microscope. Electron micrographs showed different types of phages with different shapes and sizes. The majority of viruses found in treated sewage ranged from 30 to 100 nm in capsid diameter. Many of them were tailed, belonging to Siphoviridae, Myoviridae and Podoviridae families. Non-tailed phage particles were also found at a low rate, presumably belonging to Leviviridae or Microviridae families. This study shows the diversity and the abundance of bacteriophages in wastewater after biological treatment. Their persistence in wastewater reused in agriculture should raise concerns about their potential role in controlling bacterial populations in the environment. They should be also included in water treatment quality controlling guidelines as fecal and viral indicators.

  15. New insights on ion track morphology in pyrochlores by aberration corrected scanning transmission electron microscopy

    SciTech Connect

    Sachan, Ritesh; Zhang, Yanwen; Ou, Xin; Trautmann, Christina; Chisholm, Matthew F.; Weber, William J.

    2016-12-13

    Here we demonstrate the enhanced imaging capabilities of an aberration corrected scanning transmission electron microscope to advance the understanding of ion track structure in pyrochlore structured materials (i.e., Gd2Ti2O7 and Gd2TiZrO7). Track formation occurs due to the inelastic transfer of energy from incident ions to electrons, and atomic-level details of track morphology as a function of energy-loss are revealed in the present work. A comparison of imaging details obtained by varying collection angles of detectors is discussed in the present work. A quantitative analysis of phase identification using high-angle annular dark field imaging is performed on the ion tracks. Finally, a novel 3-dimensional track reconstruction method is provided that is based on depth dependent imaging of the ion tracks. The technique is used in extracting the atomic-level details of nanoscale features, such as the disordered ion tracks, which are embedded in relatively thicker matrix. Another relevance of the method is shown by measuring the tilt of the ion tracks relative to the electron beam incidence that helps in knowing the structure and geometry of ion tracks quantitatively.

  16. New insights on ion track morphology in pyrochlores by aberration corrected scanning transmission electron microscopy

    DOE PAGES

    Sachan, Ritesh; Zhang, Yanwen; Ou, Xin; ...

    2016-12-13

    Here we demonstrate the enhanced imaging capabilities of an aberration corrected scanning transmission electron microscope to advance the understanding of ion track structure in pyrochlore structured materials (i.e., Gd2Ti2O7 and Gd2TiZrO7). Track formation occurs due to the inelastic transfer of energy from incident ions to electrons, and atomic-level details of track morphology as a function of energy-loss are revealed in the present work. A comparison of imaging details obtained by varying collection angles of detectors is discussed in the present work. A quantitative analysis of phase identification using high-angle annular dark field imaging is performed on the ion tracks. Finally,more » a novel 3-dimensional track reconstruction method is provided that is based on depth dependent imaging of the ion tracks. The technique is used in extracting the atomic-level details of nanoscale features, such as the disordered ion tracks, which are embedded in relatively thicker matrix. Another relevance of the method is shown by measuring the tilt of the ion tracks relative to the electron beam incidence that helps in knowing the structure and geometry of ion tracks quantitatively.« less

  17. Breaking the spherical and chromatic aberration barrier in transmission electron microscopy.

    PubMed

    Freitag, B; Kujawa, S; Mul, P M; Ringnalda, J; Tiemeijer, P C

    2005-02-01

    Since the invention of transmission electron microscopy (TEM) in 1932 (Z. Physik 78 (1932) 318) engineering improvements have advanced system resolutions to levels that are now limited only by the two fundamental aberrations of electron lenses; spherical and chromatic aberration (Z. Phys. 101 (1936) 593). Since both aberrations scale with the dimensions of the lens, research resolution requirements are pushing the designs to lenses with only a few mm space in the pole-piece gap for the specimen. This is in conflict with the demand for more and more space at the specimen, necessary in order to enable novel techniques in TEM, such as He-cooled cryo electron microscopy, 3D-reconstruction through tomography (Science 302 (2003) 1396) TEM in gaseous environments, or in situ experiments (Nature 427 (2004) 426). All these techniques will only be able to achieve Angstrom resolution when the aberration barriers have been overcome. The spherical aberration barrier has recently been broken by introducing spherical aberration correctors (Nature 392 (1998) 392, 418 (2002) 617), but the correction of the remaining chromatic aberrations have proved to be too difficult for the present state of technology (Optik 57 (1980) 73). Here we present an alternative and successful method to eliminate the chromatic blur, which consists of monochromating the TEM beam (Inst. Phys. Conf. Ser. 161 (1999) 191). We show directly interpretable resolutions well below 1A for the first time, which is significantly better than any TEM operating at 200 KV has reached before.

  18. Dengue virus identification by transmission electron microscopy and molecular methods in fatal dengue hemorrhagic fever.

    PubMed

    Limonta, D; Falcón, V; Torres, G; Capó, V; Menéndez, I; Rosario, D; Castellanos, Y; Alvarez, M; Rodríguez-Roche, R; de la Rosa, M C; Pavón, A; López, L; González, K; Guillén, G; Diaz, J; Guzmán, M G

    2012-12-01

    Dengue virus is the most significant virus transmitted by arthropods worldwide and may cause a potentially fatal systemic disease named dengue hemorrhagic fever. In this work, dengue virus serotype 4 was detected in the tissues of one fatal dengue hemorrhagic fever case using electron immunomicroscopy and molecular methods. This is the first report of dengue virus polypeptides findings by electron immunomicroscopy in human samples. In addition, not-previously-documented virus-like particles visualized in spleen, hepatic, brain, and pulmonary tissues from a dengue case are discussed.

  19. Experimental Investigation of Space Radiation Processing in Lunar Soil Ilmenite: Combining Perspectives from Surface Science and Transmission Electron Microscopy

    NASA Technical Reports Server (NTRS)

    Christoffersen, R.; Keller, L. P.; Rahman, Z.; Baragiola, R.

    2010-01-01

    Energetic ions mostly from the solar wind play a major role in lunar space weathering because they contribute structural and chemical changes to the space-exposed surfaces of lunar regolith grains. In mature mare soils, ilmenite (FeTiO3) grains in the finest size fraction have been shown in transmission electron microscope (TEM) studies to exhibit key differences in their response to space radiation processing relative to silicates [1,2,3]. In ilmenite, solar ion radiation alters host grain outer margins to produce 10-100 nm thick layers that are microstructurally complex, but dominantly crystalline compared to the amorphous radiation-processed rims on silicates [1,2,3]. Spatially well-resolved analytical TEM measurements also show nm-scale compositional and chemical state changes in these layers [1,3]. These include shifts in Fe/Ti ratio from strong surface Fe-enrichment (Fe/Ti >> 1), to Fe depletion (Fe/Ti < 1) at 40-50 nm below the grain surface [1,3]. These compositional changes are not observed in the radiation-processed rims on silicates [4]. Several mechanism(s) to explain the overall relations in the ilmenite grain rims by radiation processing and/or additional space weathering processes were proposed by [1], and remain under current consideration [3]. A key issue has concerned the ability of ion radiation processing alone to produce some of the deeper- penetrating compositional changes. In order to provide some experimental constraints on these questions, we have performed a combined X-ray photoelectron spectroscopy (XPS) and field-emission scanning transmission electron (FE-STEM) study of experimentally ion-irradiated ilmenite. A key feature of this work is the combination of analytical techniques sensitive to changes in the irradiated samples at depth scales going from the immediate surface (approx.5 nm; XPS), to deeper in the grain interior (5-100 nm; FE-STEM).

  20. Coercivity and transmission electron microscopy study of nanocomposite Sm{endash}Co powders by mechanical alloying

    SciTech Connect

    Chen, S.K.; Tsai, J.L.; Chin, T.S.

    1997-04-01

    A nanocomposite Sm{sub 2}Co{sub 17}/Co magnet with a composition of Sm{sub 7}Co{sub 93} was prepared by mechanical alloying. A domain{endash}wall pinning mechanism was found to be dominant in the magnet, as investigated using Kronm{umlt u}ller{close_quote}s micromagnetic theory. Transmission electron microscopy micrographs indicate that the half width between neighboring Co grains is about 40 nm. This value is two times larger than the range factor, {ital r}{sub 0}, obtained from Kronm{umlt u}ller{close_quote}s model. It appears that crystallographic defects other than the cobalt particles also play an important role in coercivity. {copyright} {ital 1997 American Institute of Physics.}

  1. Quantitative Z-contrast imaging in the scanning transmission electron microscope with size-selected clusters

    NASA Astrophysics Data System (ADS)

    Wang, Z. W.; Li, Z. Y.; Park, S. J.; Abdela, A.; Tang, D.; Palmer, R. E.

    2011-08-01

    This paper describes a new approach of quantification of annular-dark-field or Z-contrast image intensity as a function of inner acceptance angle of the detector in a scanning transmission electron microscope. By using size-selected nanoclusters of Pd (Z = 46) and Au (Z = 79), it is shown experimentally that the exponent in the power law I ˜ Zα varies strongly between 1.2 and 1.8 as the collection angle changes from 14 to 103 mrad. The result is discussed in line with existing theoretical models. Factors, such as cluster size, structure, and orientation as well as the detector geometry, are also discussed for potential use of the work.

  2. Study of the nanosiderite from ferruginous quartzites of Kursk magnetic anomaly by transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Zhukhlistov, A. P.; Novikov, V. M.

    2016-11-01

    Biogenic siderite consisting of equally crystallographically oriented disklike nanoparticles 5-20 nm in size has been found (using transmission electron microscopy) in oxidized ferruginous quartzites (jaspilites) of the Lebedinsky field of the Kursk magnetic anomaly. Based on microdiffraction data and highresolution images, lowering of the siderite structure symmetry from Roverline 3 c to Roverline 3 has been established for the first time. A siderite structure model is proposed to explain this fact. Within this model, vacancies formed as a result of oxidation of some part of Fe2+ cations to the Fe3+ state are ordered in one of two nonequivalent octahedral sites. Identical crystallographic orientation and nanoparticle morphology have been established for coexisting siderite and hematite. It is suggested that the revealed specific features of nanosiderite are related to its biogenic origin.

  3. Transmission Electron Microscopy for Nanomedicine: Novel Applications for Long-established Techniques

    PubMed Central

    2016-01-01

    During the last twenty years, the research in nanoscience and nanotechnology has dramatically increased and, in the last decade, the interest has progressively been oriented towards biomedical applications, giving rise to a new field termed nanomedicine. Transmission electron microscopy is a valuable technique not only for the thorough physico-chemical characterization of newly synthesized nanoparticulates, but especially to explore the effects of nanocomposites on biological systems, providing essential information for the development of efficient therapeutic and diagnostic strategies. Thus, for the progress of nanotechnology in the biomedical field, experts in cell biology, histochemistry and ultramicroscopy should always support the chemists, physicists and pharmacologists engaged in the synthesis and characterization of innovative nanoconstructs. PMID:28076938

  4. Preparation of cross-sectional specimens of ceramic thermal barrier coatings for transmission electron microscopy.

    PubMed

    Unal, O; Heuer, A H; Mitchell, T E

    1990-04-01

    During the microstructural examination of ceramic thermal barrier coatings by transmission electron microscopy (TEM), initial efforts for the preparation of cross-sectional thin foils from interface regions by conventional means were mostly failures. Delamination of the Y2O3-stabilized ZrO2 ceramic coating from the nickel-base alloy substrate sometimes occurred during fine polishing at around 80 microns thickness but mostly occurred during dimpling. Because of this sensitivity, special techniques for mechanical handling were developed so that ion milling could give thin enough regions of the metal-ceramic interface. TEM showed convincingly that the highly fragile nature of the coatings is in fact due to the extensive porosity at the interface developed as a result of heat treatment.

  5. Visualizing non-equilibrium lithiation of spinel oxide via in situ transmission electron microscopy.

    PubMed

    He, Kai; Zhang, Sen; Li, Jing; Yu, Xiqian; Meng, Qingping; Zhu, Yizhou; Hu, Enyuan; Sun, Ke; Yun, Hongseok; Yang, Xiao-Qing; Zhu, Yimei; Gan, Hong; Mo, Yifei; Stach, Eric A; Murray, Christopher B; Su, Dong

    2016-05-09

    Spinel transition metal oxides are important electrode materials for lithium-ion batteries, whose lithiation undergoes a two-step reaction, whereby intercalation and conversion occur in a sequential manner. These two reactions are known to have distinct reaction dynamics, but it is unclear how their kinetics affects the overall electrochemical response. Here we explore the lithiation of nanosized magnetite by employing a strain-sensitive, bright-field scanning transmission electron microscopy approach. This method allows direct, real-time, high-resolution visualization of how lithiation proceeds along specific reaction pathways. We find that the initial intercalation process follows a two-phase reaction sequence, whereas further lithiation leads to the coexistence of three distinct phases within single nanoparticles, which has not been previously reported to the best of our knowledge. We use phase-field theory to model and describe these non-equilibrium reaction pathways, and to directly correlate the observed phase evolution with the battery's discharge performance.

  6. Cytochemical techniques and energy-filtering transmission electron microscopy applied to the study of parasitic protozoa

    PubMed Central

    Lins, Ulysses

    2001-01-01

    The study of parasitic protozoa plays a major role in cell biology, biochemistry and molecular biology. Numerous cytochemical techniques have been developed in order to unequivocally identify the nature of subcellular compartments. Enzyme and immuno-cytochemistry allow the detection of, respectively, enzymatic activity products and antigens in particular sites within the cell. Energy-filtering transmission electron microscopy permits the detection of specific elements within such compartments. These approaches are particularly useful for studies employing antimicrobial agents where cellular compartments may be destroyed or remarkably altered and thus hardly identified by standard methods of observation. In this regard cytochemical and spectroscopic techniques provide valuable data allowing the determination of the mechanisms of action of such compounds. PMID:12734583

  7. Rendering graphene supports hydrophilic with non-covalent aromatic functionalization for transmission electron microscopy

    SciTech Connect

    Pantelic, Radosav S.; Fu, Wangyang; Schoenenberger, Christian; Stahlberg, Henning

    2014-03-31

    Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated samples for transmission electron microscopy (TEM), either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of thin amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled, high electrical carrier mobility. However, the hydrophobic properties of graphene have prevented its routine application in Cryo-TEM. This Letter reports a method for rendering graphene TEM supports hydrophilic—a convenient approach maintaining graphene's structural and electrical properties based on non-covalent, aromatic functionalization.

  8. Diffusion barrier properties of Ti/TiN investigated by transmission electron microscopy

    NASA Astrophysics Data System (ADS)

    Mändl, M.; Hoffmann, H.; Kücher, P.

    1990-09-01

    Detailed analytical transmission electron microscopy investigations were performed on a well-known diffusion barrier system for very-large-scale integration metallization. It will be demonstrated that interfacial reactions are of great importance for the barrier mechanism. Both Ti and TiN act as diffusion barrier for the semiconductor and the metallization, respectively. For an aluminum-based metallization, TiN has a ``spongelike'' function due to its ability to absorb several amounts of aluminum at elevated temperatures and therefore inhibits diffusion towards the substrate. Ti acts for silicon as a compound forming barrier according to Nicolet's classification [in Tungsten and Other Refractory Metals for Very Large Scale Integration Applications II, edited by E. K. Broadbent (Materials Research Society, Pittsburgh, 1987); pp. 19-26].

  9. Observations of carbon nanotube oxidation in an aberration-corrected environmental transmission electron microscope.

    PubMed

    Koh, Ai Leen; Gidcumb, Emily; Zhou, Otto; Sinclair, Robert

    2013-03-26

    We report the first direct study on the oxidation of carbon nanotubes at the resolution of an aberration-corrected environmental transmission electron microscope (ETEM), as we locate and identify changes in the same nanotubes as they undergo oxidation at increasing temperatures in situ in the ETEM. Contrary to earlier reports that CNT oxidation initiates at the end of the tube and proceeds along its length, our findings show that only the outside graphene layer is being removed and, on occasion, the interior inner wall is oxidized, presumably due to oxygen infiltrating into the hollow nanotube through an open end or breaks in the tube. We believe that this work provides the foundation for a greater scientific understanding of the mechanism underlying the nanotube oxidation process, as well as guidelines to manipulate the nanotubes' structure or prevent their oxidation.

  10. Observations of Carbon Nanotube Oxidation in an Aberration-Corrected, Environmental Transmission Electron Microscope

    PubMed Central

    Koh, Ai Leen; Gidcumb, Emily; Zhou, Otto; Sinclair, Robert

    2013-01-01

    We report the first direct study on the oxidation of carbon nanotubes at the resolution of an aberration-corrected environmental transmission electron microscope (ETEM), as we locate and identify changes in the same nanotubes as they undergo oxidation at increasing temperatures in-situ in the ETEM. Contrary to earlier reports that CNT oxidation initiates at the end of the tube and proceeds along its length, our findings show that only the outside graphene layer is being removed and on occasion, the interior inner wall is oxidized, presumably due to oxygen infiltrating into the hollow nanotube through an open end or breaks in the tube. We believe that this work provides the foundation for much scientific understanding of the mechanism underlying the nanotube oxidation process, as well as guidelines to manipulate their structure or prevent their oxidation. PMID:23360330

  11. Avoiding drying-artifacts in transmission electron microscopy: Characterizing the size and colloidal state of nanoparticles

    PubMed Central

    Michen, Benjamin; Geers, Christoph; Vanhecke, Dimitri; Endes, Carola; Rothen-Rutishauser, Barbara; Balog, Sandor; Petri-Fink, Alke

    2015-01-01

    Standard transmission electron microscopy nanoparticle sample preparation generally requires the complete removal of the suspending liquid. Drying often introduces artifacts, which can obscure the state of the dispersion prior to drying and preclude automated image analysis typically used to obtain number-weighted particle size distribution. Here we present a straightforward protocol for prevention of the onset of drying artifacts, thereby allowing the preservation of in-situ colloidal features of nanoparticles during TEM sample preparation. This is achieved by adding a suitable macromolecular agent to the suspension. Both research- and economically-relevant particles with high polydispersity and/or shape anisotropy are easily characterized following our approach (http://bsa.bionanomaterials.ch), which allows for rapid and quantitative classification in terms of dimensionality and size: features that are major targets of European Union recommendations and legislation. PMID:25965905

  12. Well-orientated cubic boron nitride nanocrystals as studied by high-resolution transmission electron microscopy.

    PubMed

    Tsiaoussis, I; Frangis, N

    2006-09-01

    In a boron nitride thin film, grown on a Si (100) substrate by radio frequency magnetron sputtering, a striking nanostructure is observed by high-resolution transmission electron microscopy. It consists of cubic boron nitride nanocrystals with a rather good triangular shape, pointing always to the substrate. The nanocrystals are usually highly defected and present their own interesting internal structure. Texture formation is observed within a nanocrystal, with all the subgrains observed to have a common <011> axis, which is also approximately parallel to a <011> axis of the Si substrate, i.e. the nanocrystals are very well structurally orientated in relation to the Si substrate (self-organized). Dislocations and stacking faults are also found in the nanocrystals.

  13. Multi-pore carbon phase plate for phase-contrast transmission electron microscopy.

    PubMed

    Sannomiya, Takumi; Junesch, Juliane; Hosokawa, Fumio; Nagayama, Kuniaki; Arai, Yoshihiro; Kayama, Yoko

    2014-11-01

    A new fabrication method of carbon based phase plates for phase-contrast transmission electron microscopy is presented. This method utilizes colloidal masks to produce pores as well as disks on thin carbon membranes for phase modulation. Since no serial process is involved, carbon phase plate membranes containing hundreds of pores can be mass-produced on a large scale, which allows "disposal" of contaminated or degraded phase modulating objects after use. Due to the spherical shape of the mask colloid particles, the produced pores are perfectly circular. The pore size and distribution can be easily tuned by the mask colloid size and deposition condition. By using the stencil method, disk type phase plates can also be fabricated on a pore type phase plate. Both pore and disk type phase plates were tested by measuring amorphous samples and confirmed to convert the sinus phase contrast transfer function to the cosine shape.

  14. Microtubules in Plant Cells: Strategies and Methods for Immunofluorescence, Transmission Electron Microscopy and Live Cell Imaging

    PubMed Central

    Celler, Katherine; Fujita, Miki; Kawamura, Eiko; Ambrose, Chris; Herburger, Klaus; Wasteneys, Geoffrey O.

    2016-01-01

    Microtubules are required throughout plant development for a wide variety of processes, and different strategies have evolved to visualize and analyze them. This chapter provides specific methods that can be used to analyze microtubule organization and dynamic properties in plant systems and summarizes the advantages and limitations for each technique. We outline basic methods for preparing samples for immunofluorescence labelling, including an enzyme-based permeabilization method, and a freeze-shattering method, which generates microfractures in the cell wall to provide antibodies access to cells in cuticle-laden aerial organs such as leaves. We discuss current options for live cell imaging of MTs with fluorescently tagged proteins (FPs), and provide chemical fixation, high pressure freezing/freeze substitution, and post-fixation staining protocols for preserving MTs for transmission electron microscopy and tomography. PMID:26498784

  15. Advances in cryogenic transmission electron microscopy for the characterization of dynamic self-assembling nanostructures

    PubMed Central

    Newcomb, Christina J.; Moyer, Tyson J.; Lee, Sungsoo S.; Stupp, Samuel I.

    2012-01-01

    Elucidating the structural information of nanoscale materials in their solvent-exposed state is crucial, as a result, cryogenic transmission electron microscopy (cryo-TEM) has become an increasingly popular technique in the materials science, chemistry, and biology communities. Cryo-TEM provides a method to directly visualize the specimen structure in a solution-state through a thin film of vitrified solvent. This technique complements X-ray, neutron, and light scattering methods that probe the statistical average of all species present; furthermore, cryo-TEM can be used to observe changes in structure over time. In the area of self-assembly, this tool has been particularly powerful for the characterization of natural and synthetic small molecule assemblies, as well as hybrid organic–inorganic composites. In this review, we discuss recent advances in cryogenic TEM in the context of self-assembling systems with emphasis on characterization of transitions observed in response to external stimuli. PMID:23204913

  16. Polishing methods for metallic and ceramic transmission electron microscopy specimens: Revision 1

    SciTech Connect

    Kestel, B.J.

    1986-03-01

    In recent years, the increasing sophistication of transmission electron microscope (TEM) studies of materials has necessitated more exacting methods of specimen preparation. The present report describes improved equipment and techniques for electropolishing and chemically polishing a wide variety of specimens. Many of the specimens used in developing or improving the techniques to be described were irradiated with heavy ions such as nickel or vanadium to study radiation damage. The high cost of these specimens increased the need for reproducible methods of initial preparation postirradiation processing, and final thinning for TEM examination. A technique was also developed to salvage specimens that had previously been thinned but were unusable for various reasons. Jet polishing is, in general, the method of choice for surface polishing, sectioning, and thinning. The older beaker electropolishing method is included in this report because it is inexpensive and simple, and gives some insight into how the more recent methods were developed.

  17. Visualizing non-equilibrium lithiation of spinel oxide via in situ transmission electron microscopy

    SciTech Connect

    He, Kai; Zhang, Sen; Li, Jing; Yu, Xiqian; Meng, Qingping; Zhu, Yizhou; Hu, Enyuan; Sun, Ke; Yun, Hongseok; Yang, Xiao -Qing; Zhu, Yimei; Gan, Hong; Mo, Yifei; Stach, Eric A.; Murray, Christopher B.; Su, Dong

    2016-05-09

    In this study, spinel transition metal oxides are an important class of materials that are being considered as electrodes for lithium-ion batteries, due to their low cost and high theoretical capacity. The lithiation of these compounds is known to undergo a two-step reaction, whereby intercalation and conversion occur in a sequential fashion. These two reactions are known to have distinct reaction dynamics, but it is unclear how the kinetics of these processes affect the overall electrochemical response. Here, we explore the lithiation of nanosized magnetite (Fe3O4) by employing a new strain-sensitive, bright-field scanning transmission electron microscopy approach.

  18. X-ray absorption in pillar shaped transmission electron microscopy specimens.

    PubMed

    Bender, H; Seidel, F; Favia, P; Richard, O; Vandervorst, W

    2017-03-07

    The dependence of the X-ray absorption on the position in a pillar shaped transmission electron microscopy specimen is modeled for X-ray analysis with single and multiple detector configurations and for different pillar orientations relative to the detectors. Universal curves, applicable to any pillar diameter, are derived for the relative intensities between weak and medium or strongly absorbed X-ray emission. For the configuration as used in 360° X-ray tomography, the absorption correction for weak and medium absorbed X-rays is shown to be nearly constant along the pillar diameter. Absorption effects in pillars are about a factor 3 less important than in planar specimens with thickness equal to the pillar diameter. A practical approach for the absorption correction in pillar shaped samples is proposed and its limitations discussed. The modeled absorption dependences are verified experimentally for pillars with HfO2 and SiGe stacks.

  19. Nanoscale Mechanics of Carbon Nanotube Evaluated by Nanoprobe Manipulation in Transmission Electron Microscope

    NASA Astrophysics Data System (ADS)

    Kuzumaki, Toru; Mitsuda, Yoshitaka

    2006-01-01

    We investigated the nanoscale mechanics of individual multiwalled carbon nanotubes (MWCNTs) by a nanoprobe manipulation technique in a transmission electron microscope (TEM). The force applied to individual MWCNTs was measured using a commercially available Si cantilever installed in a manipulator. It was clearly observed that this force is released by buckling like deformation. The average Young’s modulus of the MWCNTs estimated using a conventional mechanical theory was approximately 1.1 TPa. Although the MWCNTs exhibited a high flexibility, the deformation of the MWCNTs above the elastic limit led to structural defects, which resulted in a local plastic deformation. Nanomechanics measurements in the TEM revealed that the structural defects cause stiffness deterioration.

  20. Transmission electron microscopy analysis of mechanical polishing-related damage in silicon carbide wafers

    NASA Astrophysics Data System (ADS)

    Grim, J. R.; Benamara, M.; Skowronski, M.; Everson, W. J.; Heydemann, V. D.

    2006-12-01

    The subsurface damage generated by mechanical polishing of silicon carbide wafers was investigated and quantified by plan view transmission electron microscopy (TEM) and atomic force microscopy (AFM). Damage generated during polishing using diamond abrasives with 0.5 µm particle size consists of dislocation loops with length up to 400 nm from the scratches. The total dislocation density was estimated at 5 × 1010 dislocations cm-2. TEM analysis of the Burgers vectors indicates that the initial perfect dislocations have a Burgers vector of b = a/3 lang11-20rang-type with many dislocation dissociated into two partials with b = a/3 lang1-100rang. The depth of damage was estimated to be up to 50 nm. 4H-SiC homoepitaxial layers grown on mechanically polished substrates without further surface treatment exhibit threading dislocation density along scratches in the order of 105 cm-1.