additive effects compared: Topics by Science.gov

Sample records for additive effects compared

"Organic," "natural," and "additive-free" cigarettes: Comparing the effects of advertising claims and disclaimers on perceptions of harm.

PubMed

Baig, Sabeeh A; Byron, M Justin; Lazard, Allison J; Brewer, Noel T

2018-02-26

The U.S. Tobacco Control Act restricts advertising or labeling that suggests one tobacco product is less harmful than another. We sought to examine how "organic," "natural," and "additive-free" advertising claims and corresponding disclaimers affect perceptions of cigarettes' harm. Participants were a national probability sample of adults in the U.S. (n = 1,114, including 344 smokers). We conducted a 5 (claim) × 2 (disclaimer) between-subjects factorial experiment. Participants viewed a Natural American Spirit cigarettes ad claiming they were "organic," "natural," "additive-free," "light," or "regular;" and with or without a corresponding disclaimer. The outcome was perceived harm of the advertised cigarettes. Among smokers, we also assessed interest in switching within their current brand to cigarettes with this characteristic (e.g., "additive-free"). Claims in the ad had a large effect on perceived harm (Cohen's d = 0.87, 95% CI: 0.47-1.29). Claims of cigarettes being "organic," "natural," or "additive-free" reduced perceived harm from the advertised cigarettes, as compared to "regular" and "light" claims. Disclaimers had a small effect, increasing perceived harm (d = 0.25, 95% CI: 0.08-0.41). The problematic claims also increased smokers' interest in switching. Disclaimers had no effect on smokers' interest in switching. "Organic," "natural," and "additive-free" claims may mislead people into thinking that the advertised cigarettes are less harmful than other cigarettes. Disclaimers did not offset misperceptions of harm created by false claims. The U.S. Food and Drug Administration should restrict the use of these misleading claims in tobacco advertising.
Comparative Evaluation of Small Molecular Additives and Their Effects on Peptide/Protein Identification.

PubMed

Gao, Jing; Zhong, Shaoyun; Zhou, Yanting; He, Han; Peng, Shuying; Zhu, Zhenyun; Liu, Xing; Zheng, Jing; Xu, Bin; Zhou, Hu

2017-06-06

Detergents and salts are widely used in lysis buffers to enhance protein extraction from biological samples, facilitating in-depth proteomic analysis. However, these detergents and salt additives must be efficiently removed from the digested samples prior to LC-MS/MS analysis to obtain high-quality mass spectra. Although filter-aided sample preparation (FASP), acetone precipitation (AP), followed by in-solution digestion, and strong cation exchange-based centrifugal proteomic reactors (CPRs) are commonly used for proteomic sample processing, little is known about their efficiencies at removing detergents and salt additives. In this study, we (i) developed an integrative workflow for the quantification of small molecular additives in proteomic samples, developing a multiple reaction monitoring (MRM)-based LC-MS approach for the quantification of six additives (i.e., Tris, urea, CHAPS, SDS, SDC, and Triton X-100) and (ii) systematically evaluated the relationships between the level of additive remaining in samples following sample processing and the number of peptides/proteins identified by mass spectrometry. Although FASP outperformed the other two methods, the results were complementary in terms of peptide/protein identification, as well as the GRAVY index and amino acid distributions. This is the first systematic and quantitative study of the effect of detergents and salt additives on protein identification. This MRM-based approach can be used for an unbiased evaluation of the performance of new sample preparation methods. Data are available via ProteomeXchange under identifier PXD005405.
Comparative effects of MTBE and ethanol additions into gasoline on exhaust emissions

NASA Astrophysics Data System (ADS)

Song, Chong-Lin; Zhang, Wen-Mei; Pei, Yi-Qiang; Fan, Guo-Liang; Xu, Guan-Peng

The effects of the additives of ethanol (EA) and methyl tert-butyl ether (MTBE) in various blend ratios into the gasoline fuel on the exhaust emissions and the catalytic conversion efficiencies were investigated in an EFI gasoline engine. The regulated exhaust emissions (CO, THC and NO X) and the unregulated exhaust emissions (benzene, formaldehyde, acetaldehyde, unburned EA and MTBE) before and after the three-way catalytic converter were measured. The experimental results showed that EA brought about generally lower regulated engine-out emissions than MTBE did. But, the comparison of the unregulated engine-out emissions between both additives was different. Concretely, the effect of EA on benzene emission was worse than that of MTBE on the whole, which was a contrast with formaldehyde emission. The difference in the acetaldehyde comparison depended much on the engine operating conditions, especially the engine speed. Both EA and MTBE were identified in the engine exhaust gases only when they were added to the fuel, and their volume fraction increased with blend ratios. The catalytic conversion efficiencies of the regulated emissions for the EA blends were in general lower than those for MTBE blends, especially at the low and high engine speeds. There was little difference in the catalytic conversion efficiencies for both benzene and formaldehyde, while distinct difference for acetaldehyde.
[Effect of biochar addition on soil evaporation.

PubMed

Xu, Jian; Niu, Wen Quan; Zhang, Ming Zhi; Li, Yuan; Lyu, Wang; Li, Kang-Yong; Zou, Xiao-Yang; Liang, Bo-Hui

2016-11-18

In order to determine the rational amount of biochar application and its effect on soil hydrological processes in arid area, soil column experiments were conducted in the laboratory using three biochar additions (5%, 10% and 15%) and four different biochar types (d<0.25 mm bamboo charcoal, 0.25 mm addition of biochar could change the phreatic water recharge, soil water-holding capacity, capillary water upward movement and soil evaporation obviously. But the effects were different depending on the type of biochar raw material and the size of particle. The phreatic water recharge increased with the increasing amount of biochar addition. The addition of biochar could obviously enlarge the soil water-holding capacity and promote the capillary water upward movement rate. This effect was greater when using the material of bamboo charcoal compared with using wood charcoal, while biochar with small particle size had greater impact than that with big particle size. The biochar could effectively restrain the soil evaporation at a low addition amount (5%). But it definitely promoted the soil evaporation if the addition amount was very high. In arid area, biochar addition in appropriate amount could improve soil water retention capacity.
What is the effect of additional physiotherapy on sitting balance following stroke compared to standard physiotherapy treatment: a systematic review.

PubMed

Bank, Jessica; Charles, Katherine; Morgan, Prue

2016-02-01

Sitting balance dysfunction is commonly experienced following stroke. Physiotherapists utilize interventions to address this problem but it is unclear whether treatment type, target or practice intensity may affect outcomes. To compare the effects of standard physiotherapy to standard physiotherapy plus an additional physiotherapy treatment after stroke. The databases of Cochrane Library, CINAHL, Embase, Ovid Medline, AMED, and the Physiotherapy Evidence Database (PEDro) up to December 2014 were searched. Randomized controlled trials in English reported in peer-reviewed journals regarding the effect of additional physiotherapy on sitting balance were retrieved. The PEDro scale was used to assess study quality. Eleven studies met inclusion criteria. Nine targeted the ICF (International Classification of Function, Disability and Health) domain of Activity. The Trunk control test (TCT) was used as a primary outcome measure in five studies, and the Trunk Impairment Scale (TIS) was used in four. There was a significant effect (mean difference = 1.67, 95% CI = 0.54-2.80) favoring intervention, as measured by the TIS. There was no evidence to support the effect of additional treatment on sitting balance as measured by the TCT (mean difference = - 1.53, 95% CI = - 9.37 to 6.32). The current evidence supports strategies that target deficits at the activity level and increase total treatment time. The TIS is most responsive as a measure of treatment efficacy. Further research is required using recommended outcome measures to facilitate generation of a minimum data set and data pooling.
Comparative Effectiveness Research in Oncology

PubMed Central

2013-01-01

Although randomized controlled trials represent the gold standard for comparative effective research (CER), a number of additional methods are available when randomized controlled trials are lacking or inconclusive because of the limitations of such trials. In addition to more relevant, efficient, and generalizable trials, there is a need for additional approaches utilizing rigorous methodology while fully recognizing their inherent limitations. CER is an important construct for defining and summarizing evidence on effectiveness and safety and comparing the value of competing strategies so that patients, providers, and policymakers can be offered appropriate recommendations for optimal patient care. Nevertheless, methodological as well as political and social challenges for CER remain. CER requires constant and sophisticated methodological oversight of study design and analysis similar to that required for randomized trials to reduce the potential for bias. At the same time, if appropriately conducted, CER offers an opportunity to identify the most effective and safe approach to patient care. Despite rising and unsustainable increases in health care costs, an even greater challenge to the implementation of CER arises from the social and political environment questioning the very motives and goals of CER. Oncologists and oncology professional societies are uniquely positioned to provide informed clinical and methodological expertise to steer the appropriate application of CER toward critical discussions related to health care costs, cost-effectiveness, and the comparative value of the available options for appropriate care of patients with cancer. PMID:23697601
Effect of antistripping additives on the compaction of bituminous concrete.

DOT National Transportation Integrated Search

1981-01-01

The objective of this investigation was to determine the effect of antistripping additives on the compaction of bituminous concrete. To do this, the densities obtained on test sections with and without additive were compared. Comparisons of nuclear d...
Comparing the Effectiveness and Safety of the Addition of and Switching to Aripiprazole for Resolving Antipsychotic-Induced Hyperprolactinemia: A Multicenter, Open-Label, Prospective Study.

PubMed

Yoon, Hui Woo; Lee, Jung Suk; Park, Sang Jin; Lee, Seon-Koo; Choi, Won-Jung; Kim, Tae Yong; Hong, Chang Hyung; Seok, Jeong-Ho; Park, Il-Ho; Son, Sang Joon; Roh, Daeyoung; Kim, Bo-Ra; Lee, Byung Ook

Hyperprolactinemia is an important but often overlooked adverse effect of antipsychotics. Several studies have shown that switching to or adding aripiprazole normalizes antipsychotic-induced hyperprolactinemia. However, no study has directly compared the effectiveness and safety of the 2 strategies. A total of 52 patients with antipsychotic-induced hyperprolactinemia were recruited. Aripiprazole was administered to patients with mild hyperprolactinemia (serum prolactin level < 50 ng/mL). Patients with severe hyperprolactinemia (serum prolactin level > 50 ng/mL) were randomized to an aripiprazole-addition group (adding aripiprazole to previous antipsychotics) or a switching group (switching previous antipsychotics to aripiprazole). Serum prolactin level, menstrual disturbances, sexual dysfunction, psychopathologies, and quality of life were measured at weeks 0, 1, 2, 4, 6, and 8. Both the addition and switching groups showed significantly reduced serum prolactin level and menstrual disturbances and improved sexual dysfunction. In patients with severe hyperprolactinemia, the numbers of patients with hyperprolactinemia and menstrual disturbance in the switching group were significantly lower than those in the addition group at week 8. Both the addition and switching strategies were effective in resolving antipsychotic-induced hyperprolactinemia and hyperprolactinemia-related adverse events, including menstrual disturbances and sexual dysfunction. In addition, these findings suggest that switching to aripiprazole may be more effective than addition of aripiprazole for normalizing hyperprolactinemia and improving hyperprolactinemia-related adverse events in patients with schizophrenia.
Non-additive effects of intra- and interspecific competition between two larval salamanders.

PubMed

Anderson, Thomas L; Whiteman, Howard H

2015-05-01

Assessment of the relative strengths of intra- and interspecific competition has increased in recent years and is critical to understanding the importance of competition. Yet, whether intra- and interspecific competition can have non-additive effects has rarely been tested. The resulting fitness consequences of such non-additive interactions are important to provide the context necessary to advance our understanding of competition theory. We compared the strength of additive and non-additive intra- and interspecific competition by manipulating densities of a pair of larval salamanders (Ambystoma talpoideum and A. maculatum) in experimental mesocosms within a response surface design. Intraspecific density had the strongest effect on the strength of competition for both species, and few observed comparisons indicated interspecific competition was an important factor in predicting body size, growth or larval period length of either species. Non-additive effects of intra- and interspecific competition influenced some response variables, including size and mass at metamorphosis in A. maculatum, but at a reduced strength compared to intraspecific effects alone. Intraspecific competition was thus the dominant biotic interaction, but non-additive effects also impact the outcome of competition in these species, validating the importance of testing for and incorporating non-additive density effects into competition models. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.
Effectiveness of additional supervised exercises compared with conventional treatment alone in patients with acute lateral ankle sprains: systematic review

PubMed Central

van Ochten, John; Luijsterburg, Pim A J; van Middelkoop, Marienke; Koes, Bart W; Bierma-Zeinstra, Sita M A

2010-01-01

Objective To summarise the effectiveness of adding supervised exercises to conventional treatment compared with conventional treatment alone in patients with acute lateral ankle sprains. Design Systematic review. Data sources Medline, Embase, Cochrane Central Register of Controlled Trials, Cinahl, and reference screening. Study selection Included studies were randomised controlled trials, quasi-randomised controlled trials, or clinical trials. Patients were adolescents or adults with an acute lateral ankle sprain. The treatment options were conventional treatment alone or conventional treatment combined with supervised exercises. Two reviewers independently assessed the risk of bias, and one reviewer extracted data. Because of clinical heterogeneity we analysed the data using a best evidence synthesis. Follow-up was classified as short term (up to two weeks), intermediate (two weeks to three months), and long term (more than three months). Results 11 studies were included. There was limited to moderate evidence to suggest that the addition of supervised exercises to conventional treatment leads to faster and better recovery and a faster return to sport at short term follow-up than conventional treatment alone. In specific populations (athletes, soldiers, and patients with severe injuries) this evidence was restricted to a faster return to work and sport only. There was no strong evidence of effectiveness for any of the outcome measures. Most of the included studies had a high risk of bias, with few having adequate statistical power to detect clinically relevant differences. Conclusion Additional supervised exercises compared with conventional treatment alone have some benefit for recovery and return to sport in patients with ankle sprain, though the evidence is limited or moderate and many studies are subject to bias. PMID:20978065
Cost-effectiveness of additional catheter-directed thrombolysis for deep vein thrombosis.

PubMed

Enden, T; Resch, S; White, C; Wik, H S; Kløw, N E; Sandset, P M

2013-06-01

Additional treatment with catheter-directed thrombolysis (CDT) has recently been shown to reduce post-thrombotic syndrome (PTS). To estimate the cost effectiveness of additional CDT compared with standard treatment alone. Using a Markov decision model, we compared the two treatment strategies in patients with a high proximal deep vein thrombosis (DVT) and a low risk of bleeding. The model captured the development of PTS, recurrent venous thromboembolism and treatment-related adverse events within a lifetime horizon and the perspective of a third-party payer. Uncertainty was assessed with one-way and probabilistic sensitivity analyzes. Model inputs from the CaVenT study included PTS development, major bleeding from CDT and utilities for post DVT states including PTS. The remaining clinical inputs were obtained from the literature. Costs obtained from the CaVenT study, hospital accounts and the literature are expressed in US dollars ($); effects in quality adjusted life years (QALY). In base case analyzes, additional CDT accumulated 32.31 QALYs compared with 31.68 QALYs after standard treatment alone. Direct medical costs were $64,709 for additional CDT and $51,866 for standard treatment. The incremental cost-effectiveness ratio (ICER) was $20,429/QALY gained. One-way sensitivity analysis showed model sensitivity to the clinical efficacy of both strategies, but the ICER remained < $55,000/QALY over the full range of all parameters. The probability that CDT is cost effective was 82% at a willingness to pay threshold of $50,000/QALY gained. Additional CDT is likely to be a cost-effective alternative to the standard treatment for patients with a high proximal DVT and a low risk of bleeding. © 2013 International Society on Thrombosis and Haemostasis.
Cost-effectiveness of additional catheter-directed thrombolysis for deep vein thrombosis

PubMed Central

ENDEN, T.; RESCH, S.; WHITE, C.; WIK, H. S.; KLØW, N. E.; SANDSET, P. M.

2013-01-01

Summary Background Additional treatment with catheter-directed thrombolysis (CDT) has recently been shown to reduce post-thrombotic syndrome (PTS). Objectives To estimate the cost effectiveness of additional CDT compared with standard treatment alone. Methods Using a Markov decision model, we compared the two treatment strategies in patients with a high proximal deep vein thrombosis (DVT) and a low risk of bleeding. The model captured the development of PTS, recurrent venous thromboembolism and treatment-related adverse events within a lifetime horizon and the perspective of a third-party payer. Uncertainty was assessed with one-way and probabilistic sensitivity analyzes. Model inputs from the CaVenT study included PTS development, major bleeding from CDT and utilities for post DVT states including PTS. The remaining clinical inputs were obtained from the literature. Costs obtained from the CaVenT study, hospital accounts and the literature are expressed in US dollars ($); effects in quality adjusted life years (QALY). Results In base case analyzes, additional CDT accumulated 32.31 QALYs compared with 31.68 QALYs after standard treatment alone. Direct medical costs were $64 709 for additional CDT and $51 866 for standard treatment. The incremental cost-effectiveness ratio (ICER) was $20 429/QALY gained. One-way sensitivity analysis showed model sensitivity to the clinical efficacy of both strategies, but the ICER remained < $55 000/QALY over the full range of all parameters. The probability that CDT is cost effective was 82% at a willingness to pay threshold of $50 000/QALY gained. Conclusions Additional CDT is likely to be a cost-effective alternative to the standard treatment for patients with a high proximal DVT and a low risk of bleeding. PMID:23452204
Comparative effectiveness.

PubMed

Brown, Gary C; Brown, Melissa M

2009-05-01

To familiarize the clinician with the concept of comparative effectiveness. Recent data support the concept that utility analysis is the quality-of-life instrument best able to perform comparative effectiveness analyses. The use of time tradeoff utilities for comparative effectiveness analyses in interventions across diverse specialties of medicine can be undertaken with both excellent reliability and superior construct validity. Physicians should familiarize themselves with quality-of-life instruments that can be used to assess the comparative effectiveness of healthcare interventions. Rather than delegating comparative effectiveness to others, physicians must become involved in creating and implementing comparative effectiveness standards. Physician involvement is crucial for the best interests of patients, as physicians most intimately understand the complexities and nuances associated with healthcare interventions.
Unraveling additive from nonadditive effects using genomic relationship matrices.

PubMed

Muñoz, Patricio R; Resende, Marcio F R; Gezan, Salvador A; Resende, Marcos Deon Vilela; de Los Campos, Gustavo; Kirst, Matias; Huber, Dudley; Peter, Gary F

2014-12-01

The application of quantitative genetics in plant and animal breeding has largely focused on additive models, which may also capture dominance and epistatic effects. Partitioning genetic variance into its additive and nonadditive components using pedigree-based models (P-genomic best linear unbiased predictor) (P-BLUP) is difficult with most commonly available family structures. However, the availability of dense panels of molecular markers makes possible the use of additive- and dominance-realized genomic relationships for the estimation of variance components and the prediction of genetic values (G-BLUP). We evaluated height data from a multifamily population of the tree species Pinus taeda with a systematic series of models accounting for additive, dominance, and first-order epistatic interactions (additive by additive, dominance by dominance, and additive by dominance), using either pedigree- or marker-based information. We show that, compared with the pedigree, use of realized genomic relationships in marker-based models yields a substantially more precise separation of additive and nonadditive components of genetic variance. We conclude that the marker-based relationship matrices in a model including additive and nonadditive effects performed better, improving breeding value prediction. Moreover, our results suggest that, for tree height in this population, the additive and nonadditive components of genetic variance are similar in magnitude. This novel result improves our current understanding of the genetic control and architecture of a quantitative trait and should be considered when developing breeding strategies. Copyright © 2014 by the Genetics Society of America.
Effects of additional oxazepam in long-term users of oxazepam.

PubMed

Voshaar, Richard C Oude; Verkes, Robbert-Jan; van Luijtelaar, Gilles L J M; Edelbroek, Peter M; Zitman, Frans G

2005-02-01

Although additional dosages of benzodiazepines in long-term users of benzodiazepines are common, it is unknown whether these additional dosages resort any effect. The effects of an additional 20-mg dosage oxazepam were assessed in a double-blind, balanced-order, crossover randomized study comparing 16 long-term users of oxazepam (patients) with 18 benzodiazepine-naive controls (controls). The effects of 10 and 30 mg oxazepam were assessed at pretest and 2.5 hours after drug administration on: (a) saccadic eye movements as proxy for the sedative effect, (b) acoustic startle response (ASR) as proxy for the anxiolytic effects, (c) memory, (d) reaction time tasks, and (e) subjective measurements. Dose-related effects were found in patients on the peak velocity of saccadic eye movement and on response probability, respectively peak amplitude of the ASR. Comparison with controls, however, suggests that in patients the sedative effects might be mixed up with suppression of sedative withdrawal symptoms, whereas patients were as sensitive as benzodiazepine-naive controls for the effects of an additional dosage on the ASR. Neither 10 nor 30 mg oxazepam challenge affected the reaction time tasks in patients, whereas controls show a dose-related impairment. The memory impairing effects, however, did not differ significantly between patients and controls. In contrast to controls, patients could not discriminate between a 10- and 30-mg dosage as assessed by visual analogue scales and the STAI-DY-1, which might indicate a placebo effect in the 10-mg challenge in patients. We conclude that additional dosages of oxazepam still exert pronounced effects after daily use for more than 10 years.
Additive effects of plant sterols supplementation in addition to different lipid-lowering regimens.

PubMed

Malina, Daniela M T; Fonseca, Francisco A; Barbosa, Sílvio A; Kasmas, Soraia H; Machado, Valéria A; França, Carolina N; Borges, Ney C; Moreno, Ronilson A; Izar, Maria C

2015-01-01

Plant sterol (PS) supplementation has been widely used alone or combined with lipid-lowering therapies (LLTs) to reduce low-density lipoprotein (LDL) cholesterol. The effects of PS added to high-intensity LLT are less reported, especially regarding the effects on cholesterol synthesis and absorption. A prospective, randomized, open-label study, with parallel arms and blinded end points was designed to evaluate the effects of addition of PS to LLT on LDL cholesterol, markers of cholesterol synthesis, and absorption. Eighty-six patients of both genders were submitted to a 4-wk run-in period with atorvastatin 10 mg (baseline). Following, subjects received atorvastatin 40 mg, ezetimibe 10 mg, or combination of both drugs for another 4-wk period (phase I). In phase II, capsules containing 2.0 g of PSs were added to previous assigned treatments for 4 wk. Lipids, apolipoproteins, plasma campesterol, β-sitosterol, and desmosterol levels were assayed at all time points. Within and between-group analyses were performed. Compared with baseline, atorvastatin 40 mg reduced total and LDL cholesterol (3% and 22%, respectively, P < .05), increased β-sitosterol, campesterol/cholesterol, and β-sitosterol/cholesterol ratios (39%, 47%, and 32%, respectively, P < .05); ezetimibe 10 mg reduced campesterol and campesterol/cholesterol ratio (67% and 70%, respectively, P < .05), and the combined therapy decreased total and LDL cholesterol (22% and 38%, respectively, P < .05), campesterol, β-sitosterol, and campesterol/cholesterol ratio (54%, 40%, and 27%, P < .05). Addition of PS further reduced total and LDL cholesterol by ∼ 7.7 and 6.5%, respectively, in the atorvastatin therapy group and 5.0 and 4.0% in the combined therapy group (P < .05, for all), with no further effects in absorption or synthesis markers. PS added to LLT can further improve lipid profile, without additional effects on intestinal sterol absorption or synthesis. Copyright © 2015 National Lipid Association
Influence of Polarization on Carbohydrate Hydration: A Comparative Study Using Additive and Polarizable Force Fields.

PubMed

Pandey, Poonam; Mallajosyula, Sairam S

2016-07-14

Carbohydrates are known to closely modulate their surrounding solvent structures and influence solvation dynamics. Spectroscopic investigations studying far-IR regions (below 1000 cm(-1)) have observed spectral shifts in the libration band (around 600 cm(-1)) of water in the presence of monosaccharides and polysaccharides. In this paper, we use molecular dynamics simulations to gain atomistic insight into carbohydrate-water interactions and to specifically highlight the differences between additive (nonpolarizable) and polarizable simulations. A total of six monosaccharide systems, α and β anomers of glucose, galactose, and mannose, were studied using additive and polarizable Chemistry at HARvard Macromolecular Mechanics (CHARMM) carbohydrate force fields. Solvents were modeled using three additive water models TIP3P, TIP4P, and TIP5P in additive simulations and polarizable water model SWM4 in polarizable simulations. The presence of carbohydrate has a significant effect on the microscopic water structure, with the effects being pronounced for proximal water molecules. Notably, disruption of the tetrahedral arrangement of proximal water molecules was observed due to the formation of strong carbohydrate-water hydrogen bonds in both additive and polarizable simulations. However, the inclusion of polarization resulted in significant water-bridge occupancies, improved ordered water structures (tetrahedral order parameter), and longer carbohydrate-water H-bond correlations as compared to those for additive simulations. Additionally, polarizable simulations also allowed the calculation of power spectra from the dipole-dipole autocorrelation function, which corresponds to the IR spectra. From the power spectra, we could identify spectral signatures differentiating the proximal and bulk water structures, which could not be captured from additive simulations.
Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

PubMed

Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

2016-11-01

Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. Copyright © 2016 Elsevier Ltd. All rights reserved.
Non-additive Effects in Genomic Selection

PubMed Central

Varona, Luis; Legarra, Andres; Toro, Miguel A.; Vitezica, Zulma G.

2018-01-01

In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism) markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i) they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii) they allow the definition of mate allocation procedures between candidates for selection; and (iii) they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection. PMID:29559995
Non-additive Effects in Genomic Selection.

PubMed

Varona, Luis; Legarra, Andres; Toro, Miguel A; Vitezica, Zulma G

2018-01-01

In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism) markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i) they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii) they allow the definition of mate allocation procedures between candidates for selection; and (iii) they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection.

The effect of various pozzolanic additives on the concrete strength index

NASA Astrophysics Data System (ADS)

Vitola, L.; Sahmenko, G.; Erdmane, D.; Bumanis, G.; Bajare, D.

2017-10-01

The concrete industry is searching continuously for new effective mineral additives to improve the concrete properties. Replacing cement with the pozzolanic additives in most cases has resulted not only in positive impact on the environment but also has improved strength and durability of the concrete. Effective pozzolanic additives can be obtained from natural resources such as volcanic ashes, kaolin and other sediments as well as from different production industries that create various by-products with high pozzolanic reactivity. Current research deals with effectiveness evaluation of various mineral additives/wastes, such as coal combustion bottom ash, barley bottom ash, waste glass and metakaolin containing waste as well as calcined illite clays as supplementary cementitious materials, to be used in concrete production as partial cement replacement. Most of the examined materials are used as waste stream materials with potential reactive effect on the concrete. Milling time and fineness of the tested supplementary material has been evaluated and effectiveness was detected. Results indicate that fineness of the tested materials has crucial effect on the concrete compressive strength index. Not in all cases the prolonged milling time can increase fineness and reactivity of the supplementary materials; however the optimal milling time and fineness of the pozolanic additives increased the strength index of concrete up to 1.16 comparing to reference, even in cases when cement was substituted by 20 w%.
Epistasis interaction of QTL effects as a genetic parameter influencing estimation of the genetic additive effect.

PubMed

Bocianowski, Jan

2013-03-01

Epistasis, an additive-by-additive interaction between quantitative trait loci, has been defined as a deviation from the sum of independent effects of individual genes. Epistasis between QTLs assayed in populations segregating for an entire genome has been found at a frequency close to that expected by chance alone. Recently, epistatic effects have been considered by many researchers as important for complex traits. In order to understand the genetic control of complex traits, it is necessary to clarify additive-by-additive interactions among genes. Herein we compare estimates of a parameter connected with the additive gene action calculated on the basis of two models: a model excluding epistasis and a model with additive-by-additive interaction effects. In this paper two data sets were analysed: 1) 150 barley doubled haploid lines derived from the Steptoe × Morex cross, and 2) 145 DH lines of barley obtained from the Harrington × TR306 cross. The results showed that in cases when the effect of epistasis was different from zero, the coefficient of determination was larger for the model with epistasis than for the one excluding epistasis. These results indicate that epistatic interaction plays an important role in controlling the expression of complex traits.
Cost-effectiveness of intensive multifactorial treatment compared with routine care for individuals with screen-detected Type 2 diabetes: analysis of the ADDITION-UK cluster-randomized controlled trial

PubMed Central

Tao, L; Wilson, E C F; Wareham, N J; Sandbæk, A; Rutten, G E H M; Lauritzen, T; Khunti, K; Davies, M J; Borch-Johnsen, K; Griffin, S J; Simmons, R K

2015-01-01

Aims To examine the short- and long-term cost-effectiveness of intensive multifactorial treatment compared with routine care among people with screen-detected Type 2 diabetes. Methods Cost–utility analysis in ADDITION-UK, a cluster-randomized controlled trial of early intensive treatment in people with screen-detected diabetes in 69 UK general practices. Unit treatment costs and utility decrement data were taken from published literature. Accumulated costs and quality-adjusted life years (QALYs) were calculated using ADDITION-UK data from 1 to 5 years (short-term analysis, n = 1024); trial data were extrapolated to 30 years using the UKPDS outcomes model (version 1.3) (long-term analysis; n = 999). All costs were transformed to the UK 2009/10 price level. Results Adjusted incremental costs to the NHS were £285, £935, £1190 and £1745 over a 1-, 5-, 10- and 30-year time horizon, respectively (discounted at 3.5%). Adjusted incremental QALYs were 0.0000, – 0.0040, 0.0140 and 0.0465 over the same time horizons. Point estimate incremental cost-effectiveness ratios (ICERs) suggested that the intervention was not cost-effective although the ratio improved over time: the ICER over 10 years was £82 250, falling to £37 500 over 30 years. The ICER fell below £30 000 only when the intervention cost was below £631 per patient: we estimated the cost at £981. Conclusion Given conventional thresholds of cost-effectiveness, the intensive treatment delivered in ADDITION was not cost-effective compared with routine care for individuals with screen-detected diabetes in the UK. The intervention may be cost-effective if it can be delivered at reduced cost. PMID:25661661
Effects of additional food in a delayed predator-prey model.

PubMed

Sahoo, Banshidhar; Poria, Swarup

2015-03-01

We examine the effects of supplying additional food to predator in a gestation delay induced predator-prey system with habitat complexity. Additional food works in favor of predator growth in our model. Presence of additional food reduces the predatory attack rate to prey in the model. Supplying additional food we can control predator population. Taking time delay as bifurcation parameter the stability of the coexisting equilibrium point is analyzed. Hopf bifurcation analysis is done with respect to time delay in presence of additional food. The direction of Hopf bifurcations and the stability of bifurcated periodic solutions are determined by applying the normal form theory and the center manifold theorem. The qualitative dynamical behavior of the model is simulated using experimental parameter values. It is observed that fluctuations of the population size can be controlled either by supplying additional food suitably or by increasing the degree of habitat complexity. It is pointed out that Hopf bifurcation occurs in the system when the delay crosses some critical value. This critical value of delay strongly depends on quality and quantity of supplied additional food. Therefore, the variation of predator population significantly effects the dynamics of the model. Model results are compared with experimental results and biological implications of the analytical findings are discussed in the conclusion section. Copyright © 2015 Elsevier Inc. All rights reserved.
Vector Addition: Effect of the Context and Position of the Vectors

NASA Astrophysics Data System (ADS)

Barniol, Pablo; Zavala, Genaro

2010-10-01

In this article we investigate the effect of: 1) the context, and 2) the position of the vectors, on 2D vector addition tasks. We administered a test to 512 students completing introductory physics courses at a private Mexican university. In the first part, we analyze students' responses in three isomorphic problems: displacements, forces, and no physical context. Students were asked to draw two vectors and the vector sum. We analyzed students' procedures detecting the difficulties when drawing the vector addition and proved that the context matters, not only compared to the context-free case but also between the contexts. In the second part, we analyze students' responses with three different arrangements of the sum of two vectors: tail-to-tail, head-to-tail and separated vectors. We compared the frequencies of the errors in the three different positions to deduce students' conceptions in the addition of vectors.
Pediatric cochlear implants: additional disabilities prevalence, risk factors, and effect on language outcomes.

PubMed

Birman, Catherine S; Elliott, Elizabeth J; Gibson, William P R

2012-10-01

To determine the prevalence of additional disabilities in a pediatric cochlear population, to identify medical and radiologic conditions associated with additional disabilities, and to identify the effect of additional disabilities on speech perception and language at 12 months postoperatively. Retrospective case review. Tertiary referral center and cochlear implant program. Records were reviewed for children 0 to 16 years old inclusive, who had cochlear implant-related operations over a 12-month period. Diagnostic and rehabilitative. Additional disabilities prevalence; medical history and radiologic abnormalities; and the effect on Categories of Auditory Performance (CAP) score at 12 months postoperatively. Eighty-eight children having 96 operations were identified. The overall prevalence of additional disabilities (including developmental delay, cerebral palsy, visual impairment, autism and attention deficit disorder) was 33%. The main conditions associated with additional disabilities were syndromes and chromosomal abnormalities (87%), jaundice (86%), prematurity (62%), cytomegalovirus (60%), and inner ear abnormalities including cochlea nerve hypoplasia or aplasia (75%) and semicircular canal anomalies (56%). At 12 months postoperatively, almost all (96%) of the children without additional disabilities had a CAP score of 5 or greater (speech), compared with 52% of children with additional disabilities. Children with developmental delay had a median CAP score of 4, at 12 months compared with 6 for those without developmental delay. Additional disabilities are prevalent in approximately a third of pediatric cochlear implant patients. Additional disabilities significantly affect the outcomes of cochlear implants.
EFFECT OF A WHOLE-CATCHMENT N ADDITION ON STREAM DETRITUS PROCESSING

EPA Science Inventory

The Bear Brook Watershed in Maine (BBWM) is a paired catchment study investigating ecosystem effects of N and S deposition. Because of the decade long (NH4)2SO4 addition, the treatment catchment has higher stream NO3 and enriched foliar N concentrations compared to the reference ...
Disseminating Comparative Effectiveness Research Through Community-based Experiential Learning.

PubMed

Hansen, Richard A; Williamson, Margaret; Stevenson, Lynn; Davis, Brandy R; Evans, R Lee

2017-02-25

Objectives. To launch and evaluate a comparative effectiveness research education and dissemination program as part of an introductory pharmacy practice experience (IPPE). Methods. First- through third-year PharmD students received training on comparative effectiveness research and disseminated printed educational materials to patients in the community who they were monitoring longitudinally (n=314). Students completed an assessment and initial visit documentation form at the first visit, and a follow-up assessment and documentation form at a subsequent visit. Results. Twenty-three diabetes patients, 29 acid-reflux patients, 30 osteoarthritis patients, and 50 hypertension patients received materials. Aside from the patient asking questions, which was the most common outcome (n=44), the program resulted in 38 additional actions, which included stopping, starting, or changing treatments or health behaviors, or having additional follow-up or diagnostic testing. Small but positive improvements in patient understanding, confidence, and self-efficacy were observed. Conclusions. Dissemination of comparative effectiveness research materials in an IPPE program demonstrated a positive trend in markers of informed decision-making.
A comparative study of additive and subtractive manufacturing for dental restorations.

PubMed

Bae, Eun-Jeong; Jeong, Il-Do; Kim, Woong-Chul; Kim, Ji-Hwan

2017-08-01

Digital systems have recently found widespread application in the fabrication of dental restorations. For the clinical assessment of dental restorations fabricated digitally, it is necessary to evaluate their accuracy. However, studies of the accuracy of inlay restorations fabricated with additive manufacturing are lacking. The purpose of this in vitro study was to evaluate and compare the accuracy of inlay restorations fabricated by using recently introduced additive manufacturing with the accuracy of subtractive methods. The inlay (distal occlusal cavity) shape was fabricated using 3-dimensional image (reference data) software. Specimens were fabricated using 4 different methods (each n=10, total N=40), including 2 additive manufacturing methods, stereolithography apparatus and selective laser sintering; and 2 subtractive methods, wax and zirconia milling. Fabricated specimens were scanned using a dental scanner and then compared by overlapping reference data. The results were statistically analyzed using a 1-way analysis of variance (α=.05). Additionally, the surface morphology of 1 randomly (the first of each specimen) selected specimen from each group was evaluated using a digital microscope. The results of the overlap analysis of the dental restorations indicated that the root mean square (RMS) deviation observed in the restorations fabricated using the additive manufacturing methods were significantly different from those fabricated using the subtractive methods (P<.05). However, no significant differences were found between restorations fabricated using stereolithography apparatus and selective laser sintering, the additive manufacturing methods (P=.466). Similarly, no significant differences were found between wax and zirconia, the subtractive methods (P=.986). The observed RMS values were 106 μm for stereolithography apparatus, 113 μm for selective laser sintering, 116 μm for wax, and 119 μm for zirconia. Microscopic evaluation of the surface
Assessing non-additive effects in GBLUP model.

PubMed

Vieira, I C; Dos Santos, J P R; Pires, L P M; Lima, B M; Gonçalves, F M A; Balestre, M

2017-05-10

Understanding non-additive effects in the expression of quantitative traits is very important in genotype selection, especially in species where the commercial products are clones or hybrids. The use of molecular markers has allowed the study of non-additive genetic effects on a genomic level, in addition to a better understanding of its importance in quantitative traits. Thus, the purpose of this study was to evaluate the behavior of the GBLUP model in different genetic models and relationship matrices and their influence on the estimates of genetic parameters. We used real data of the circumference at breast height in Eucalyptus spp and simulated data from a population of F 2 . Three commonly reported kinship structures in the literature were adopted. The simulation results showed that the inclusion of epistatic kinship improved prediction estimates of genomic breeding values. However, the non-additive effects were not accurately recovered. The Fisher information matrix for real dataset showed high collinearity in estimates of additive, dominant, and epistatic variance, causing no gain in the prediction of the unobserved data and convergence problems. Estimates presented differences of genetic parameters and correlations considering the different kinship structures. Our results show that the inclusion of non-additive effects can improve the predictive ability or even the prediction of additive effects. However, the high distortions observed in the variance estimates when the Hardy-Weinberg equilibrium assumption is violated due to the presence of selection or inbreeding can converge at zero gains in models that consider epistasis in genomic kinship.
Concentration Addition, Independent Action and Generalized Concentration Addition Models for Mixture Effect Prediction of Sex Hormone Synthesis In Vitro

PubMed Central

Hadrup, Niels; Taxvig, Camilla; Pedersen, Mikael; Nellemann, Christine; Hass, Ulla; Vinggaard, Anne Marie

2013-01-01

Humans are concomitantly exposed to numerous chemicals. An infinite number of combinations and doses thereof can be imagined. For toxicological risk assessment the mathematical prediction of mixture effects, using knowledge on single chemicals, is therefore desirable. We investigated pros and cons of the concentration addition (CA), independent action (IA) and generalized concentration addition (GCA) models. First we measured effects of single chemicals and mixtures thereof on steroid synthesis in H295R cells. Then single chemical data were applied to the models; predictions of mixture effects were calculated and compared to the experimental mixture data. Mixture 1 contained environmental chemicals adjusted in ratio according to human exposure levels. Mixture 2 was a potency adjusted mixture containing five pesticides. Prediction of testosterone effects coincided with the experimental Mixture 1 data. In contrast, antagonism was observed for effects of Mixture 2 on this hormone. The mixtures contained chemicals exerting only limited maximal effects. This hampered prediction by the CA and IA models, whereas the GCA model could be used to predict a full dose response curve. Regarding effects on progesterone and estradiol, some chemicals were having stimulatory effects whereas others had inhibitory effects. The three models were not applicable in this situation and no predictions could be performed. Finally, the expected contributions of single chemicals to the mixture effects were calculated. Prochloraz was the predominant but not sole driver of the mixtures, suggesting that one chemical alone was not responsible for the mixture effects. In conclusion, the GCA model seemed to be superior to the CA and IA models for the prediction of testosterone effects. A situation with chemicals exerting opposing effects, for which the models could not be applied, was identified. In addition, the data indicate that in non-potency adjusted mixtures the effects cannot always be
Nitrogen Addition Altered the Effect of Belowground C Allocation on Soil Respiration in a Subtropical Forest

PubMed Central

He, Tongxin; Wang, Qingkui; Wang, Silong; Zhang, Fangyue

2016-01-01

The availabilities of carbon (C) and nitrogen (N) in soil play an important role in soil carbon dioxide (CO2) emission. However, the variation in the soil respiration (Rs) and response of microbial community to the combined changes in belowground C and N inputs in forest ecosystems are not yet fully understood. Stem girdling and N addition were performed in this study to evaluate the effects of C supply and N availability on Rs and soil microbial community in a subtropical forest. The trees were girdled on 1 July 2012. Rs was monitored from July 2012 to November 2013, and soil microbial community composition was also examined by phospholipid fatty acids (PLFAs) 1 year after girdling. Results showed that Rs decreased by 40.5% with girdling alone, but N addition only did not change Rs. Interestingly, Rs decreased by 62.7% under the girdling with N addition treatment. The reducing effect of girdling and N addition on Rs differed between dormant and growing seasons. Girdling alone reduced Rs by 33.9% in the dormant season and 54.8% in the growing season compared with the control. By contrast, girdling with N addition decreased Rs by 59.5% in the dormant season and 65.4% in the growing season. Girdling and N addition significantly decreased the total and bacterial PLFAs. Moreover, the effect of N addition was greater than girdling. Both girdling and N addition treatments separated the microbial groups on the basis of the first principal component through principal component analysis compared with control. This indicated that girdling and N addition changed the soil microbial community composition. However, the effect of girdling with N addition treatment separated the microbial groups on the basis of the second principal component compared to N addition treatment, which suggested N addition altered the effect of girdling on soil microbial community composition. These results suggest that the increase in soil N availability by N deposition alters the effect of
Probiotic Fermented Milk Containing Dietary Fiber Has Additive Effects in IBS with Constipation Compared to Plain Probiotic Fermented Milk.

PubMed

Choi, Sung Chul; Kim, Beom Jin; Rhee, Poong-Lyul; Chang, Dong Kyung; Son, Hee Jung; Kim, Jae J; Rhee, Jong Chul; Kim, Soon Im; Han, Young Sil; Sim, Ki Hyeon; Park, Seok Nam

2011-03-01

Although controversial, probiotics and dietary fiber are commonly used for patients with irritable bowel syndrome (IBS). We evaluated the effects of multistrain probiotics on the symptoms of IBS to determine whether the addition of dietary fi ber had an additive effect on constipation-predominant IBS. A total of 142 participants who met the Rome III criteria were recruited and randomized into a control group or a test group. Participants in the control group received multistrain probiotic fermented milk with Streptococcus thermophilus, Lactobacillus acidophilus and Bifidobacterium infantis; the participants in the test group received the same probiotic fermented milk mixed with dietary fi ber such as sea tangle extracts, radish extracts and glasswort extracts. The patients were treated for four weeks. Most of the symptoms of IBS, with the exception of fl atulence, stool consistency, and frequency of defecation, signifi cantly improved in both groups. In the analysis of IBS subtypes, especially constipation-predominant IBS, the frequency and duration of defecation and straining at stool were improved more in the test group than in the control group. Dietary fiber had additive benefits for the symptoms of constipation, especially in constipation-predominant IBS.
Comparative effectiveness research.

PubMed

Hirsch, J A; Schaefer, P W; Romero, J M; Rabinov, J D; Sanelli, P C; Manchikanti, L

2014-09-01

The goal of comparative effectiveness research is to improve health care while dealing with the seemingly ever-rising cost. An understanding of comparative effectiveness research as a core topic is important for neuroradiologists. It can be used in a variety of ways. Its goal is to look at alternative methods of interacting with a clinical condition, ideally, while improving delivery of care. While the Patient-Centered Outcome Research initiative is the most mature US-based foray into comparative effectiveness research, it has been used more robustly in decision-making in other countries for quite some time. The National Institute for Health and Clinical Excellence of the United Kingdom is a noteworthy example of comparative effectiveness research in action. © 2014 by American Journal of Neuroradiology.
Implementation of Complexity Analyzing Based on Additional Effect

NASA Astrophysics Data System (ADS)

Zhang, Peng; Li, Na; Liang, Yanhong; Liu, Fang

According to the Complexity Theory, there is complexity in the system when the functional requirement is not be satisfied. There are several study performances for Complexity Theory based on Axiomatic Design. However, they focus on reducing the complexity in their study and no one focus on method of analyzing the complexity in the system. Therefore, this paper put forth a method of analyzing the complexity which is sought to make up the deficiency of the researches. In order to discussing the method of analyzing the complexity based on additional effect, this paper put forth two concepts which are ideal effect and additional effect. The method of analyzing complexity based on additional effect combines Complexity Theory with Theory of Inventive Problem Solving (TRIZ). It is helpful for designers to analyze the complexity by using additional effect. A case study shows the application of the process.
Example-based learning: comparing the effects of additionally providing three different integrative learning activities on physiotherapy intervention knowledge.

PubMed

Dyer, Joseph-Omer; Hudon, Anne; Montpetit-Tourangeau, Katherine; Charlin, Bernard; Mamede, Sílvia; van Gog, Tamara

2015-03-07

Example-based learning using worked examples can foster clinical reasoning. Worked examples are instructional tools that learners can use to study the steps needed to solve a problem. Studying worked examples paired with completion examples promotes acquisition of problem-solving skills more than studying worked examples alone. Completion examples are worked examples in which some of the solution steps remain unsolved for learners to complete. Providing learners engaged in example-based learning with self-explanation prompts has been shown to foster increased meaningful learning compared to providing no self-explanation prompts. Concept mapping and concept map study are other instructional activities known to promote meaningful learning. This study compares the effects of self-explaining, completing a concept map and studying a concept map on conceptual knowledge and problem-solving skills among novice learners engaged in example-based learning. Ninety-one physiotherapy students were randomized into three conditions. They performed a pre-test and a post-test to evaluate their gains in conceptual knowledge and problem-solving skills (transfer performance) in intervention selection. They studied three pairs of worked/completion examples in a digital learning environment. Worked examples consisted of a written reasoning process for selecting an optimal physiotherapy intervention for a patient. The completion examples were partially worked out, with the last few problem-solving steps left blank for students to complete. The students then had to engage in additional self-explanation, concept map completion or model concept map study in order to synthesize and deepen their knowledge of the key concepts and problem-solving steps. Pre-test performance did not differ among conditions. Post-test conceptual knowledge was higher (P < .001) in the concept map study condition (68.8 ± 21.8%) compared to the concept map completion (52.8 ± 17.0%) and self
Cost-effectiveness of additional blood screening tests in the Netherlands.

PubMed

Borkent-Raven, Barbara A; Janssen, Mart P; van der Poel, Cees L; Bonsel, Gouke J; van Hout, Ben A

2012-03-01

During the past decade, blood screening tests such as triplex nucleic acid amplification testing (NAT) and human T-cell lymphotropic virus type I or I (HTLV-I/II) antibody testing were added to existing serologic testing for hepatitis B virus (HBV), human immunodeficiency virus (HIV), and hepatitis C virus (HCV). In some low-prevalence regions these additional tests yielded disputable benefits that can be valuated by cost-effectiveness analyses (CEAs). CEAs are used to support decision making on implementation of medical technology. We present CEAs of selected additional screening tests that are not uniformly implemented in the EU. Cost-effectiveness was analyzed of: 1) HBV, HCV, and HIV triplex NAT in addition to serologic testing; 2) HTLV-I/II antibody test for all donors, for first-time donors only, and for pediatric recipients only; and 3) hepatitis A virus (HAV) for all donations. Disease progression of the studied viral infections was described in five Markov models. In the Netherlands, the incremental cost-effectiveness ratio (ICER) of triplex NAT is €5.20 million per quality-adjusted life-year (QALY) for testing minipools of six donation samples and €4.65 million/QALY for individual donation testing. The ICER for anti-HTLV-I/II is €45.2 million/QALY if testing all donations, €2.23 million/QALY if testing new donors only, and €27.0 million/QALY if testing blood products for pediatric patients only. The ICER of HAV NAT is €18.6 million/QALY. The resulting ICERs are very high, especially when compared to other health care interventions. Nevertheless, these screening tests are implemented in the Netherlands and elsewhere. Policy makers should reflect more explicit on the acceptability of costs and effects whenever additional blood screening tests are implemented. © 2011 American Association of Blood Banks.
Modeling additive and non-additive effects in a hybrid population using genome-wide genotyping: prediction accuracy implications

PubMed Central

Bouvet, J-M; Makouanzi, G; Cros, D; Vigneron, Ph

2016-01-01

Hybrids are broadly used in plant breeding and accurate estimation of variance components is crucial for optimizing genetic gain. Genome-wide information may be used to explore models designed to assess the extent of additive and non-additive variance and test their prediction accuracy for the genomic selection. Ten linear mixed models, involving pedigree- and marker-based relationship matrices among parents, were developed to estimate additive (A), dominance (D) and epistatic (AA, AD and DD) effects. Five complementary models, involving the gametic phase to estimate marker-based relationships among hybrid progenies, were developed to assess the same effects. The models were compared using tree height and 3303 single-nucleotide polymorphism markers from 1130 cloned individuals obtained via controlled crosses of 13 Eucalyptus urophylla females with 9 Eucalyptus grandis males. Akaike information criterion (AIC), variance ratios, asymptotic correlation matrices of estimates, goodness-of-fit, prediction accuracy and mean square error (MSE) were used for the comparisons. The variance components and variance ratios differed according to the model. Models with a parent marker-based relationship matrix performed better than those that were pedigree-based, that is, an absence of singularities, lower AIC, higher goodness-of-fit and accuracy and smaller MSE. However, AD and DD variances were estimated with high s.es. Using the same criteria, progeny gametic phase-based models performed better in fitting the observations and predicting genetic values. However, DD variance could not be separated from the dominance variance and null estimates were obtained for AA and AD effects. This study highlighted the advantages of progeny models using genome-wide information. PMID:26328760
Effect of Fuel Additives on Spray Performance of Alternative Jet Fuels

NASA Astrophysics Data System (ADS)

Kannaiyan, Kumaran; Sadr, Reza

2015-11-01

Role of alternative fuels on reducing the combustion pollutants is gaining momentum in both land and air transport. Recent studies have shown that addition of nanoscale metal particles as fuel additives to liquid fuels have a positive effect not only on their combustion performance but also in reducing the pollutant formation. However, most of those studies are still in the early stages of investigation with the addition of nanoparticles at low weight percentages. Such an addition can affect the hydrodynamic and thermo-physical properties of the fuel. In this study, the near nozzle spray performance of gas-to-liquid jet fuel with and without the addition of alumina nanoparticles are investigated at macro- and microscopic levels using optical diagnostic techniques. At macroscopic level, the addition of nanoparticles is seen to enhance the sheet breakup process when compared to that of the base fuel. Furthermore, the microscopic spray characteristics such as droplet size and velocity are also found to be affected. Although the addition of nanoscale metal particles at low weight percentages does not affect the bulk fluid properties, the atomization process is found to be affected in the near nozzle region. Funded by Qatar National Research Fund.
Versatility of Cooperative Transcriptional Activation: A Thermodynamical Modeling Analysis for Greater-Than-Additive and Less-Than-Additive Effects

PubMed Central

Frank, Till D.; Carmody, Aimée M.; Kholodenko, Boris N.

2012-01-01

We derive a statistical model of transcriptional activation using equilibrium thermodynamics of chemical reactions. We examine to what extent this statistical model predicts synergy effects of cooperative activation of gene expression. We determine parameter domains in which greater-than-additive and less-than-additive effects are predicted for cooperative regulation by two activators. We show that the statistical approach can be used to identify different causes of synergistic greater-than-additive effects: nonlinearities of the thermostatistical transcriptional machinery and three-body interactions between RNA polymerase and two activators. In particular, our model-based analysis suggests that at low transcription factor concentrations cooperative activation cannot yield synergistic greater-than-additive effects, i.e., DNA transcription can only exhibit less-than-additive effects. Accordingly, transcriptional activity turns from synergistic greater-than-additive responses at relatively high transcription factor concentrations into less-than-additive responses at relatively low concentrations. In addition, two types of re-entrant phenomena are predicted. First, our analysis predicts that under particular circumstances transcriptional activity will feature a sequence of less-than-additive, greater-than-additive, and eventually less-than-additive effects when for fixed activator concentrations the regulatory impact of activators on the binding of RNA polymerase to the promoter increases from weak, to moderate, to strong. Second, for appropriate promoter conditions when activator concentrations are increased then the aforementioned re-entrant sequence of less-than-additive, greater-than-additive, and less-than-additive effects is predicted as well. Finally, our model-based analysis suggests that even for weak activators that individually induce only negligible increases in promoter activity, promoter activity can exhibit greater-than-additive responses when

POEM: Identifying Joint Additive Effects on Regulatory Circuits.

PubMed

Botzman, Maya; Nachshon, Aharon; Brodt, Avital; Gat-Viks, Irit

2016-01-01

Expression Quantitative Trait Locus (eQTL) mapping tackles the problem of identifying variation in DNA sequence that have an effect on the transcriptional regulatory network. Major computational efforts are aimed at characterizing the joint effects of several eQTLs acting in concert to govern the expression of the same genes. Yet, progress toward a comprehensive prediction of such joint effects is limited. For example, existing eQTL methods commonly discover interacting loci affecting the expression levels of a module of co-regulated genes. Such "modularization" approaches, however, are focused on epistatic relations and thus have limited utility for the case of additive (non-epistatic) effects. Here we present POEM (Pairwise effect On Expression Modules), a methodology for identifying pairwise eQTL effects on gene modules. POEM is specifically designed to achieve high performance in the case of additive joint effects. We applied POEM to transcription profiles measured in bone marrow-derived dendritic cells across a population of genotyped mice. Our study reveals widespread additive, trans-acting pairwise effects on gene modules, characterizes their organizational principles, and highlights high-order interconnections between modules within the immune signaling network. These analyses elucidate the central role of additive pairwise effect in regulatory circuits, and provide computational tools for future investigations into the interplay between eQTLs. The software described in this article is available at csgi.tau.ac.il/POEM/.
Effect of dietary copper addition on lipid metabolism in rabbits

PubMed Central

Lei, Liu; Xiaoyi, Sui; Fuchang, Li

2017-01-01

ABSTRACT The present study was conducted to investigate the effect of copper supplementation on lipid metabolism in rabbits. Our study showed dietary copper addition (5-45 mg/kg) increased body mass gain, but decreased fat and liver weights compared with those in the control group (P < 0.05). Copper (45 mg/kg) addition significantly increased the skeletal muscle weight, but inhibited cytoplasmic lipid accumulation in liver, skeletal muscle and adipose tissue (P < 0.05). Compared with the control group, dietary copper addition (45 mg/kg) significantly increased plasma triglyceride levels but decreased very low density lipoprotein levels (P < 0.05). Copper treatment significantly increased gene expression of carnitine palmitoyltransferase (CPT) 1, CPT2 and peroxisome proliferator-activated receptor (PPAR) a in liver (P < 0.05). In skeletal muscle, CPT1, CPT2, fatty acid transport protein, fatty acid-binding protein, and PPARa mRNA as well as phosphorylated AMP-activated protein kinase (AMPK) levels were significantly up-regulated by copper treatment (P < 0.05). Rabbits receiving copper supplementation had higher CPT1, CPT2, PPARa and hormone-sensitive lipase mRNA levels in adipose tissue (P < 0.05). In conclusion, copper promoted skeletal muscle growth and reduced fat accretion. PPARa signaling in liver, skeletal muscle and adipose tissues and AMPK signaling in skeletal muscle tissue were involved in the regulation of lipid metabolism by copper. PMID:28747869
Ticagrelor and Rosuvastatin Have Additive Cardioprotective Effects via Adenosine.

PubMed

Birnbaum, Yochai; Birnbaum, Gilad D; Birnbaum, Itamar; Nylander, Sven; Ye, Yumei

2016-12-01

Ticagrelor inhibits the equilibrative-nucleoside-transporter-1 and thereby, adenosine cell re-uptake. Ticagrelor limits infarct size (IS) in non-diabetic rats and the effect is adenosine-dependent. Statins, via ecto-5'-nucleotidase activation, also increase adenosine levels and limit IS. Ticagrelor and rosuvastatin have additive effects on myocardial adenosine levels, and therefore, on IS and post-reperfusion activation of the NLRP3-inflammasome. Diabetic ZDF rats received via oral gavage; water (control), ticagrelor (150 mg/kg/d), prasugrel (7.5 mg/kg/d), rosuvastatin (5 mg/kg/d), ticagrelor + rosuvastatin and prasugrel + rosuvastatin for 3d. On day 4, rats underwent 30 min coronary artery occlusion and 24 h of reperfusion. Two additional groups received, ticagrelor + rosuvastatin or water in combination with CGS15943 (CGS, an adenosine receptor antagonist, 10 mg/kg i.p. 1 h before ischemia). Both ticagrelor and rosuvastatin increased myocardial adenosine levels with an additive effect of the combination whereas prasugrel had no effect. Similarly, both ticagrelor and rosuvastatin significantly reduced IS with an additive effect of the combination whereas prasugrel had no effect. The effect on IS was adenosine dependent as CGS15943 reversed the effect of ticagrelor + rosuvastatin. The ischemia-reperfusion injury increased myocardial mRNA levels of NLRP3, ASC, IL-1β and IL-6. Ticagrelor and rosuvastatin, but not prasugrel, significantly decreased these pro-inflammatory mediators with a trend to an additive effect of the combination. The combination also increased the levels of anti-inflammatory 15-epilipoxin A 4 . Ticagrelor and rosuvastatin when given in combination have an additive effect on local myocardial adenosine levels in the setting of ischemia reperfusion. This translates into an additive cardioprotective effect mediated by adenosine-induced effects including downregulation of pro- but upregulation of anti-inflammatory mediators.
Effect of hydrogen addition on soot formation in an ethylene/air premixed flame

NASA Astrophysics Data System (ADS)

De Iuliis, S.; Maffi, S.; Migliorini, F.; Cignoli, F.; Zizak, G.

2012-03-01

The effect of hydrogen addition to fuel in soot formation and growth mechanisms is investigated in a rich ethylene/air premixed flame. To this purpose, three-angle scattering and extinction measurements are carried out in flames with different hydrogen contents. By applying the Rayleigh-Debye-Gans theory and the fractal-like description, soot concentration and morphology, with the evaluation of radius of gyration, volume-mean diameter and primary particle diameter are retrieved. To derive fractal parameters such as fractal dimension and fractal prefactor to be used for optical measurements, sampling technique and TEM analysis are performed. In addition, data concerning soot morphology obtained from TEM analysis are compared with the optical results. A good agreement in the value of the primary particle diameter between optical and ex-situ measurements is found. Significant effects of hydrogen addition are detected and presented in this work. In particular, hydrogen addition to fuel is responsible for a reduction in soot concentration, radius of gyration and primary particle diameter.
Simulating changes to emergency care resources to compare system effectiveness.

PubMed

Branas, Charles C; Wolff, Catherine S; Williams, Justin; Margolis, Gregg; Carr, Brendan G

2013-08-01

To apply systems optimization methods to simulate and compare the most effective locations for emergency care resources as measured by access to care. This study was an optimization analysis of the locations of trauma centers (TCs), helicopter depots (HDs), and severely injured patients in need of time-critical care in select US states. Access was defined as the percentage of injured patients who could reach a level I/II TC within 45 or 60 minutes. Optimal locations were determined by a search algorithm that considered all candidate sites within a set of existing hospitals and airports in finding the best solutions that maximized access. Across a dozen states, existing access to TCs within 60 minutes ranged from 31.1% to 95.6%, with a mean of 71.5%. Access increased from 0.8% to 35.0% after optimal addition of one or two TCs. Access increased from 1.0% to 15.3% after optimal addition of one or two HDs. Relocation of TCs and HDs (optimal removal followed by optimal addition) produced similar results. Optimal changes to TCs produced greater increases in access to care than optimal changes to HDs although these results varied across states. Systems optimization methods can be used to compare the impacts of different resource configurations and their possible effects on access to care. These methods to determine optimal resource allocation can be applied to many domains, including comparative effectiveness and patient-centered outcomes research. Copyright © 2013 Elsevier Inc. All rights reserved.
Congruence of Additive and Non-Additive Effects on Gene Expression Estimated from Pedigree and SNP Data

PubMed Central

Powell, Joseph E.; Henders, Anjali K.; McRae, Allan F.; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G.; Dermitzakis, Emmanouil T.; Gibson, Greg

2013-01-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted—in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects. PMID:23696747
Congruence of additive and non-additive effects on gene expression estimated from pedigree and SNP data.

PubMed

Powell, Joseph E; Henders, Anjali K; McRae, Allan F; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G; Dermitzakis, Emmanouil T; Gibson, Greg; Montgomery, Grant W; Visscher, Peter M

2013-05-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted--in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects.
POEM: Identifying Joint Additive Effects on Regulatory Circuits

PubMed Central

Botzman, Maya; Nachshon, Aharon; Brodt, Avital; Gat-Viks, Irit

2016-01-01

Motivation: Expression Quantitative Trait Locus (eQTL) mapping tackles the problem of identifying variation in DNA sequence that have an effect on the transcriptional regulatory network. Major computational efforts are aimed at characterizing the joint effects of several eQTLs acting in concert to govern the expression of the same genes. Yet, progress toward a comprehensive prediction of such joint effects is limited. For example, existing eQTL methods commonly discover interacting loci affecting the expression levels of a module of co-regulated genes. Such “modularization” approaches, however, are focused on epistatic relations and thus have limited utility for the case of additive (non-epistatic) effects. Results: Here we present POEM (Pairwise effect On Expression Modules), a methodology for identifying pairwise eQTL effects on gene modules. POEM is specifically designed to achieve high performance in the case of additive joint effects. We applied POEM to transcription profiles measured in bone marrow-derived dendritic cells across a population of genotyped mice. Our study reveals widespread additive, trans-acting pairwise effects on gene modules, characterizes their organizational principles, and highlights high-order interconnections between modules within the immune signaling network. These analyses elucidate the central role of additive pairwise effect in regulatory circuits, and provide computational tools for future investigations into the interplay between eQTLs. Availability: The software described in this article is available at csgi.tau.ac.il/POEM/. PMID:27148351
Comparative Shock Response of Additively Manufactured Versus Conventionally Wrought 304L Stainless Steel*

NASA Astrophysics Data System (ADS)

Wise, J. L.; Adams, D. P.; Nishida, E. E.; Song, B.; Maguire, M. C.; Carroll, J.; Reedlunn, B.; Bishop, J. E.

2015-06-01

Gas-gun experiments have probed the compression and release behavior of impact-loaded 304L stainless steel specimens machined from additively manufactured (AM) blocks as well as baseline ingot-derived bar stock. The AM technology allows direct fabrication of metal parts. For the present study, a velocity interferometer (VISAR) measured the time-resolved motion of samples subjected to one-dimensional (i.e., uniaxial strain) shock compression to peak stresses ranging from 0.2 to 7.5 GPa. The acquired wave-profile data have been analyzed to determine the comparative Hugoniot Elastic Limit (HEL), Hugoniot equation of state, spall strength, and high-pressure yield strength of the AM and conventional materials. Observed differences in shock loading and unloading characteristics for the two 304L source variants have been correlated to complementary Kolsky bar results for compressive and tensile testing at lower strain rates. The effects of composition, porosity, microstructure (e.g., grain size and morphology), residual stress, and sample axis orientation relative to the additive manufacturing deposition trajectory have been assessed to explain differences between the AM and baseline 304L dynamic mechanical properties. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.
Effect of additives on the purification of urease

NASA Astrophysics Data System (ADS)

Yu, X.; Wang, J.; Ulrich, J.

2015-12-01

The effect of additives on the purification of proteins was investigated. The target protein studied here is the enzyme urease. Studies on the purification of urease from jack bean meal were carried out. 32% (v/v) acetone was utilized to extract urease from the jack bean meal. Further purification by crystallization with the addition of 2-mercaptoethanol and EDTA disodium salt dehydrate was carried out. It was found out that the presence of additives can affect the selectivity of the crystallization. Increases in both purity and yield of the urease after crystallization were observed in the presence of additives, which were proven using both SDS-PAGE and activity. Urease crystals with a yield of 69.9% and a purity of 85.1% were obtained in one crystallization step in the presence of additives. Furthermore, the effect of additives on the thermodynamics and kinetics of urease crystallization was studied.
Effects of addition of sodium lauryl sulfate on frozen-thawed canine spermatozoa.

PubMed

Hori, Tatsuya; Kaseki, Hanae; Fukuhara, Youko; Oba, Hiromichi; Mizutani, Tatsuji; Kawakami, Eiichi; Tsutsui, Toshihiko

2006-10-01

The addition of Orvus ES paste (OEP) to extender may be essential for preparing frozen dog semen. The major ingredient of OEP is sodium lauryl sulfate (SLS). In this study, we compared the effect of SLS on frozen dog semen with that of OEP. There were no significant differences between the 2-mg/ml SLS group and OEP group concerning sperm motility, viability and the percentage of viable sperm with intact acrosomes after freeze-thawing. These results suggest that the effectiveness of frozen dog semen extender containing 2 mg/ml of SLS is similar effective to that demonstrated for OEP.
Comparing GWAS Results of Complex Traits Using Full Genetic Model and Additive Models for Revealing Genetic Architecture

PubMed Central

Monir, Md. Mamun; Zhu, Jun

2017-01-01

Most of the genome-wide association studies (GWASs) for human complex diseases have ignored dominance, epistasis and ethnic interactions. We conducted comparative GWASs for total cholesterol using full model and additive models, which illustrate the impacts of the ignoring genetic variants on analysis results and demonstrate how genetic effects of multiple loci could differ across different ethnic groups. There were 15 quantitative trait loci with 13 individual loci and 3 pairs of epistasis loci identified by full model, whereas only 14 loci (9 common loci and 5 different loci) identified by multi-loci additive model. Again, 4 full model detected loci were not detected using multi-loci additive model. PLINK-analysis identified two loci and GCTA-analysis detected only one locus with genome-wide significance. Full model identified three previously reported genes as well as several new genes. Bioinformatics analysis showed some new genes are related with cholesterol related chemicals and/or diseases. Analyses of cholesterol data and simulation studies revealed that the full model performs were better than the additive-model performs in terms of detecting power and unbiased estimations of genetic variants of complex traits. PMID:28079101
Eddy damping effect of additional conductors in superconducting levitation systems

NASA Astrophysics Data System (ADS)

Jiang, Zhao-Fei; Gou, Xiao-Fan

2015-12-01

Passive superconducting levitation systems consisting of a high temperature superconductor (HTSC) and a permanent magnet (PM) have demonstrated several fascinating applications such as the maglev system, flywheel energy storage. Generally, for the HTSC-PM levitation system, the HTSC with higher critical current density Jc can obtain larger magnetic force to make the PM levitate over the HTSC (or suspended below the HTSC), however, the process of the vibration of the levitated PM, provides very limited inherent damping (essentially hysteresis). To improve the dynamic stability of the levitated PM, eddy damping of additional conductors can be considered as the most simple and effective approach. In this article, for the HTSC-PM levitation system with an additional copper damper attached to the HTSC, we numerically and comprehensively investigated the damping coefficient c, damping ratio, Joule heating of the copper damper, and the vibration frequency of the PM as well. Furthermore, we comparatively studied four different arrangements of the copper damper, on the comprehensive analyzed the damping effect, efficiency (defined by c/VCu, in which VCu is the volume of the damper) and Joule heating, and finally presented the most advisable arrangement.
Pharmacological and Chemical Effects of Cigarette Additives

PubMed Central

Rabinoff, Michael; Caskey, Nicholas; Rissling, Anthony; Park, Candice

2007-01-01

We investigated tobacco industry documents and other sources for evidence of possible pharmacological and chemical effects of tobacco additives. Our findings indicated that more than 100 of 599 documented cigarette additives have pharmacological actions that camouflage the odor of environmental tobacco smoke emitted from cigarettes, enhance or maintain nicotine delivery, could increase the addictiveness of cigarettes, and mask symptoms and illnesses associated with smoking behaviors. Whether such uses were specifically intended for these agents is unknown. Our results provide a clear rationale for regulatory control of tobacco additives. PMID:17666709
Examining the use of comparative and cost-effectiveness analyses in radiology.

PubMed

Goehler, Alexander; Gazelle, G Scott

2014-11-01

This article explores key principles of comparative effectiveness analysis--in particular, how radiologic comparative and cost-effectiveness studies differ from other clinical trials. Exemplary studies are reviewed to show how comparative effectiveness has been implemented in radiology and how future studies might be conducted. Finally, the article closes with a discussion of several additional key themes relevant to quality and value in clinical radiology going forward. Comparative effectiveness is likely to require a paradigm shift in thinking within the discipline. For new radiologic applications to be accepted, we will need to show at least a significant change in treatment planning and at best a meaningful change in patient outcomes. This shift will require a forward-thinking approach to robust evidence generation for new imaging modalities or indications and the inclusion of other modes of value demonstration such as clinical decision support and intelligent data mining.
Additive scales in degenerative disease--calculation of effect sizes and clinical judgment.

PubMed

Riepe, Matthias W; Wilkinson, David; Förstl, Hans; Brieden, Andreas

2011-12-16

The therapeutic efficacy of an intervention is often assessed in clinical trials by scales measuring multiple diverse activities that are added to produce a cumulative global score. Medical communities and health care systems subsequently use these data to calculate pooled effect sizes to compare treatments. This is done because major doubt has been cast over the clinical relevance of statistically significant findings relying on p values with the potential to report chance findings. Hence in an aim to overcome this pooling the results of clinical studies into a meta-analyses with a statistical calculus has been assumed to be a more definitive way of deciding of efficacy. We simulate the therapeutic effects as measured with additive scales in patient cohorts with different disease severity and assess the limitations of an effect size calculation of additive scales which are proven mathematically. We demonstrate that the major problem, which cannot be overcome by current numerical methods, is the complex nature and neurobiological foundation of clinical psychiatric endpoints in particular and additive scales in general. This is particularly relevant for endpoints used in dementia research. 'Cognition' is composed of functions such as memory, attention, orientation and many more. These individual functions decline in varied and non-linear ways. Here we demonstrate that with progressive diseases cumulative values from multidimensional scales are subject to distortion by the limitations of the additive scale. The non-linearity of the decline of function impedes the calculation of effect sizes based on cumulative values from these multidimensional scales. Statistical analysis needs to be guided by boundaries of the biological condition. Alternatively, we suggest a different approach avoiding the error imposed by over-analysis of cumulative global scores from additive scales.
Effect of enzyme addition on the nutritive value of high oleic acid sunflower seeds in chicken diets.

PubMed

Brenes, A; Centeno, C; Viveros, A; Arija, I

2008-11-01

Two experiments were conducted to evaluate the effects of enzyme addition in chicken diets containing high oleic acid sunflower seeds (HOASS). In the first experiment (4 to 21 d of age), enzyme addition (lipase, phospholipase, and a combination of these) was used at the inclusion level of 1 g/kg in diets containing HOASS (250 g/kg) compared with a control corn-soybean diet. Weight gain, feed consumption, relative liver weight, fat digestibility, and amylase, lipase, serum lactate dehydrogenase (LDH), and creatine phosphokinase (CPK) activities were reduced, and feed conversion, relative duodenum, jejunum, ileum, and ceca lengths, plasma uric acid, cholesterol, and glucose concentrations were increased in the unsupplemented HOASS diet compared with the control diet. The addition of enzymes to the HOASS diet increased weight gain, feed consumption, relative pancreas and liver weights, fat digestibility, amylase and lipase activities, plasma uric acid, calcium, serum LDH and CPK, and total protein concentration and reduced feed conversion, relative spleen weight, relative duodenum, jejunum, ileum, and ceca lengths, plasma cholesterol, and glucose compared with the unsupplemented HOASS diet. In the second experiment (0 to 21 d of age), the same enzymes (0.5 g/kg each) were included in diets containing 150 g/kg of HOASS compared with a conventional sunflower meal diet (150 g/kg). The HOASS diet did not affect performance but reduced relative pancreas and abdominal fat weights and relative duodenum and ceca lengths, and increased crude fat, CP, and essential and nonessential amino acid digestibilities (except Ser, which was reduced) compared with the control diet. The addition of enzymes in the HOASS diet increased weight gain, feed consumption, and relative pancreas weight and reduced feed conversion, CP, and essential and nonessential amino acid digestibilities compared with the unsupplemented HOASS diet. In conclusion, the addition of 250 g of HOASS/kg in the diets
A Comprehensive Review of Effect of Biodiesel Additives on Properties, Performance, and Emission

NASA Astrophysics Data System (ADS)

Madiwale, S.; Karthikeyan, A.; Bhojwani, V.

2017-05-01

Objectives:- To presents the literature review on effect of biodiesel additives on properties, performance and on emission. Method:-In the current paper reviews are taken from previous years paper which necessitates the need of addition of additives in the blends of biodiesel and studied the its effect on properties, performance and emissions. Emissions from the diesel powered vehicles mostly damaged the earth’s environment and also increased the overall earth’s temperature. This attracts the need of alternative fuels in the field of transportation sector. Past inventions and research showed that Biodiesel can be used as an alternative fuel for the diesel engine. Biodiesel have good combustion characteristics because of their long chain hydrocarbon structure. However biodiesel possesses few disadvantages such as lower heating value, higher flow ability, much high density and not able to flow at low temperature. Higher rate of fuel consumption is identified and higher level of NOx emissions when biodiesel used in an engine as an alternative fuels. Findings:-Different additives such as antioxidants, improvers for cetane number, cold flow properties improver, etc were investigated by the many researcher and scientists and added in the different feedstock of biodiesel or blends of biodiesel with diesel in different proportions. Directly or indirectly fuel additives can improve the reduction in the emissions, improve the fuel economy, and reduce the dependency of the one’s nation on other. Performances of biodiesel vehicles were drastically improved because of additioninthe blends of biodiesel with diesel fuel in specific percentages to meet the international emission standards. Addition of additives in the biodiesel or in the blends of biodiesel basically changes the high temperature and low temperature flow properties of blends of biodiesel. Current paper finds and compares properties of different additives and its effect on blends of biodiesel properties
Genomic Model with Correlation Between Additive and Dominance Effects.

PubMed

Xiang, Tao; Christensen, Ole Fredslund; Vitezica, Zulma Gladis; Legarra, Andres

2018-05-09

Dominance genetic effects are rarely included in pedigree-based genetic evaluation. With the availability of single nucleotide polymorphism markers and the development of genomic evaluation, estimates of dominance genetic effects have become feasible using genomic best linear unbiased prediction (GBLUP). Usually, studies involving additive and dominance genetic effects ignore possible relationships between them. It has been often suggested that the magnitude of functional additive and dominance effects at the quantitative trait loci are related, but there is no existing GBLUP-like approach accounting for such correlation. Wellmann and Bennewitz showed two ways of considering directional relationships between additive and dominance effects, which they estimated in a Bayesian framework. However, these relationships cannot be fitted at the level of individuals instead of loci in a mixed model and are not compatible with standard animal or plant breeding software. This comes from a fundamental ambiguity in assigning the reference allele at a given locus. We show that, if there has been selection, assigning the most frequent as the reference allele orients the correlation between functional additive and dominance effects. As a consequence, the most frequent reference allele is expected to have a positive value. We also demonstrate that selection creates negative covariance between genotypic additive and dominance genetic values. For parameter estimation, it is possible to use a combined additive and dominance relationship matrix computed from marker genotypes, and to use standard restricted maximum likelihood (REML) algorithms based on an equivalent model. Through a simulation study, we show that such correlations can easily be estimated by mixed model software and accuracy of prediction for genetic values is slightly improved if such correlations are used in GBLUP. However, a model assuming uncorrelated effects and fitting orthogonal breeding values and dominant
Effect and interactions of commercial additives and chloride ion in copper electrowinning

NASA Astrophysics Data System (ADS)

Cui, Wenyuan

This thesis is to understand and compare the effects and interactions of modified polysaccharide (HydroStar), polyacrylamide (Cyquest N-900) and chloride ion on copper electrowinning. A study of the nucleation and growth was conducted in a synthetic electrolyte (40 g/L Cu, 160 g/L H2SO 4, 20 mg/L Cl-) with the addition of HydroStar or Cyquest N-900 using potential step measurements. The current responses generated were compared to theoretical models of nucleation and growth mechanisms. The nucleation and growth mechanism changed as function of potential and the presence of organic additives. The nucleation and growth mechanisms were confirmed using scanning electron microscopy (SEM). At low overpotentials, electrodeposition from the electrolyte without additives proceeded by progressive nucleation with three-dimensional (3-D) growth. The addition of HydroStar produced smaller nuclei and changed the mechanism to progressive nucleation and 2-D growth. Cyquest N-900 used there appeared to be progressive nucleation with 2-D growth and polarize the cathodes. In addition, instantaneous nucleation under diffusion control occurred at high overpotentials. Chloride ion and its interaction with HydroStar and Cyquest N-900 were further characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The trends observed from Nyquist plots and equivalent circuit models were consistent with the CV results. Chloride, on its own, depolarized copper electrodeposition, while chloride ion associated with Cyquest N-900 inhibited the reaction. It is proposed that Cl- acted as a bridging ligand between copper and Cyquest N-900. The addition of HydroStar depolarized copper deposition, but it did not interact with.

Influence of handling on the effectiveness of antistripping additives.

DOT National Transportation Integrated Search

1980-01-01

The purpose of this investigation was to determine the influence of the procedures used in handling asphalt-additive blends on the effectiveness of antistripping additives in asphaltic concrete. The additives were blended with the asphalt cements bef...
Effect of enzyme concentration, addition of water and incubation time on increase in yield of starch from potato.

PubMed

Sit, Nandan; Agrawal, U S; Deka, Sankar C

2014-05-01

Enzymatic treatment process for starch extraction from potato was investigated using cellulase enzyme and compared with conventional process. The effects of three parameters, cellulase enzyme concentration, incubation time and addition of water were evaluated for increase in starch yield as compared to the conventional process i.e., without using enzyme. A two-level full factorial design was used to study the process. The results indicated that all the main parameters and their interactions are statistically significant. Enzyme concentration and incubation time had a positive effect on the increase in starch yield while addition of water had a negative effect. The increase in starch yield ranged from 1.9% at low enzyme concentration and incubation time and high addition of water to a maximum of 70% increase from conventional process in starch yield was achieved when enzyme concentration and incubation time were high and addition of water was low suggesting water present in the ground potato meal is sufficient for access to the enzyme with in the slurry ensuring adequate contact with the substrate.
The effect of tailor-made additives on crystal growth of methyl paraben: Experiments and modelling

NASA Astrophysics Data System (ADS)

Cai, Zhihui; Liu, Yong; Song, Yang; Guan, Guoqiang; Jiang, Yanbin

2017-03-01

In this study, methyl paraben (MP) was selected as the model component, and acetaminophen (APAP), p-methyl acetanilide (PMAA) and acetanilide (ACET), which share the similar molecular structure as MP, were selected as the three tailor-made additives to study the effect of tailor-made additives on the crystal growth of MP. HPLC results indicated that the MP crystals induced by the three additives contained MP only. Photographs of the single crystals prepared indicated that the morphology of the MP crystals was greatly changed by the additives, but PXRD and single crystal diffraction results illustrated that the MP crystals were the same polymorph only with different crystal habits, and no new crystal form was found compared with other references. To investigate the effect of the additives on the crystal growth, the interaction between additives and facets was discussed in detail using the DFT methods and MD simulations. The results showed that APAP, PMAA and ACET would be selectively adsorbed on the growth surfaces of the crystal facets, which induced the change in MP crystal habits.
Properties of wood-plastic composites: effect of inorganic additives

NASA Astrophysics Data System (ADS)

Bakraji, Elias Hanna; Salman, Numan

2003-01-01

Wood-plastic composites from Syrian tree species (white poplar, cypress tree, and white willow) were prepared using gamma-ray irradiation. Dry wood was impregnated with acrylamide or butylmethacrylate at various methanol compositions as the swelling solvent. Effect of inorganic additives and co-additives such as lithium nitrate (LiNO 3), copper sulfate (CuSO 4) and sulfuric acid (H 2SO 4), used at a very low concentration (1%), on the polymer loading (PL) and the compression strength (CS) was also investigated. It has been found that all the additives and co-additives, except Cu 2+, increase the PL values and only Li + has a positive effect on CS.
Comparative effectiveness of lipid-lowering treatments to reduce cardiovascular disease.

PubMed

Suh, Dong-Churl; Griggs, Scott K; Henderson, Emmett R; Lee, Seung-Mi; Park, Taehwan

2018-02-01

The proprotein convertase subtilisin/kexin type 9 (PCSK9) inhibitor is a new treatment option for patients with hypercholesterolemia. The objective of this study was to systematically review the cost-effectiveness of lipid-lowering agents. Areas covered: Based on Pubmed, Embase, and Cochrane Database of Systematic Reviews, we identified 29 relevant articles. Studies found statins were cost-effective compared with placebo or no treatment in general. Atorvastatin was reported to be cost-effective against simvastatin. In most cases, rosuvastatin was more cost-effective than atorvastatin or simvastatin. Additionally, ezetimibe was considered to be cost-effective compared with no treatment for statin intolerant patients. For patients not meeting treatment goals with their statins, switching to ezetimibe plus simvastatin was consistently reported cost-effective. The cost-effectiveness of ezetimibe plus a hybrid of a statin varied by the source of clinical data and cost of ezetimibe. Finally, the cost-effectiveness of PCSK9 inhibitor plus a statin against statin monotherapy was uncertain. The PCSK9 inhibitor plus a stain was cost-ineffective compared with ezetimibe plus a statin. Expert commentary: Drug costs and treatment efficacy were the key drivers of the cost-effectiveness results in prior analyses. Future evaluations are warranted to reflect the decreasing drug prices and the long-term treatment effects of PCSK9 inhibitors.
Effect of primary-zone equivalence ratio and hydrogen addition on exhaust emission in a hydrocarbon-fueled combustor

NASA Technical Reports Server (NTRS)

Norgren, C. T.; Ingebo, R. D.

1974-01-01

The effects of reducing the primary-zone equivalence ratio on the exhaust emission levels of oxides of nitrogen, carbon monoxide, and unburned hydrocarbons in experimental hydrocarbon-fueled combustor segments at simulated supersonic cruise and idle conditions were investigated. In addition, the effects of the injection of hydrogen fuel (up to 4 percent of the total weight of fuel) on the stability of the hydrocarbon flame and exhaust emissions were studied and compared with results obtained without hydrogen addition.
Effects of additional data on Bayesian clustering.

PubMed

Yamazaki, Keisuke

2017-10-01

Hierarchical probabilistic models, such as mixture models, are used for cluster analysis. These models have two types of variables: observable and latent. In cluster analysis, the latent variable is estimated, and it is expected that additional information will improve the accuracy of the estimation of the latent variable. Many proposed learning methods are able to use additional data; these include semi-supervised learning and transfer learning. However, from a statistical point of view, a complex probabilistic model that encompasses both the initial and additional data might be less accurate due to having a higher-dimensional parameter. The present paper presents a theoretical analysis of the accuracy of such a model and clarifies which factor has the greatest effect on its accuracy, the advantages of obtaining additional data, and the disadvantages of increasing the complexity. Copyright © 2017 Elsevier Ltd. All rights reserved.
Delayed addition of nitrogen-rich substrates during composting of municipal waste: Effects on nitrogen loss, greenhouse gas emissions and compost stability.

PubMed

Nigussie, Abebe; Bruun, Sander; Kuyper, Thomas W; de Neergaard, Andreas

2017-01-01

Municipal waste is usually composted with an N-rich substrate, such as manure, to increase the N content of the product. This means that a significant amount of nitrogen can be lost during composting. The objectives of this study were (i) to investigate the effect of split addition of a nitrogen-rich substrate (poultry manure) on nitrogen losses and greenhouse gas emissions during composting and to link this effect to different bulking agents (coffee husks and sawdust), and (ii) to assess the effect of split addition of a nitrogen-rich substrate on compost stability and sanitisation. The results showed that split addition of the nitrogen-rich substrate reduced nitrogen losses by 9% when sawdust was used and 20% when coffee husks were used as the bulking agent. Depending on the bulking agent used, split addition increased cumulative N 2 O emissions by 400-600% compared to single addition. In contrast, single addition increased methane emissions by up to 50% compared to split addition of the substrate. Hence, the timing of the addition of the N-rich substrate had only a marginal effect on total non-CO 2 greenhouse gas emissions. Split addition of the N-rich substrate resulted in compost that was just as stable and effective at completely eradicating weed seeds as single addition. These findings therefore show that split addition of a nitrogen-rich substrate could be an option for increasing the fertilising value of municipal waste compost without having a significant effect on total greenhouse gas emissions or compost stability. Copyright © 2016 Elsevier Ltd. All rights reserved.
Bioremediation of diesel fuel contaminated soil: effect of non ionic surfactants and selected bacteria addition.

PubMed

Collina, Elena; Lasagni, Marina; Pitea, Demetrio; Franzetti, Andrea; Di Gennaro, Patrizia; Bestetti, Giuseppina

2007-09-01

Aim of this work was to evaluate influence of two commercial surfactants and inoculum of selected bacteria on biodegradation of diesel fuel in different systems. Among alkyl polyethossilates (Brij family) and sorbitan derivates (Tween family) a first selection of surfactants was performed by estimation of Koc and Dafnia magna EC50 with molecular descriptor and QSAR model. Further experiments were conducted to evaluate soil sorption, biodegradability and toxicity. In the second part of the research, the effect of Brij 56, Tween 80 and selected bacteria addition on biodegradation of diesel fuel was studied in liquid cultures and in slurry and solid phase systems. The latter experiments were performed with diesel contaminated soil in bench scale slurry phase bioreactor and solid phase columns. Tween 80 addition increased the biodegradation rate of hydrocarbons both in liquid and in slurry phase systems. Regarding the effect of inoculum, no enhancement of biodegradation rate was observed neither in surfactant added nor in experiments without addition. On the contrary, in solid phase experiments, inoculum addition resulted in enhanced biodegradation compared to surfactant addition.
QSAR prediction of additive and non-additive mixture toxicities of antibiotics and pesticide.

PubMed

Qin, Li-Tang; Chen, Yu-Han; Zhang, Xin; Mo, Ling-Yun; Zeng, Hong-Hu; Liang, Yan-Peng

2018-05-01

Antibiotics and pesticides may exist as a mixture in real environment. The combined effect of mixture can either be additive or non-additive (synergism and antagonism). However, no effective predictive approach exists on predicting the synergistic and antagonistic toxicities of mixtures. In this study, we developed a quantitative structure-activity relationship (QSAR) model for the toxicities (half effect concentration, EC 50 ) of 45 binary and multi-component mixtures composed of two antibiotics and four pesticides. The acute toxicities of single compound and mixtures toward Aliivibrio fischeri were tested. A genetic algorithm was used to obtain the optimized model with three theoretical descriptors. Various internal and external validation techniques indicated that the coefficient of determination of 0.9366 and root mean square error of 0.1345 for the QSAR model predicted that 45 mixture toxicities presented additive, synergistic, and antagonistic effects. Compared with the traditional concentration additive and independent action models, the QSAR model exhibited an advantage in predicting mixture toxicity. Thus, the presented approach may be able to fill the gaps in predicting non-additive toxicities of binary and multi-component mixtures. Copyright © 2018 Elsevier Ltd. All rights reserved.
Additive benefits of pneumococcal and influenza vaccines among elderly persons aged 75 years or older in Taiwan--a representative population-based comparative study.

PubMed

Chang, Yu-Chia; Chou, Yiing-Jenq; Liu, Jen-Yin; Yeh, Te-Feng; Huang, Nicole

2012-09-01

It remains unclear whether pneumococcal vaccine provides additional protection to the elderly who have already vaccinated with influenza vaccine. This retrospective cohort study aimed to assess the additive effect of pneumococcal and influenza vaccines on the risk of mortality, hospitalization, and inpatient expenditure in the elderly aged 75 years or older in Taiwan. Data were extracted from the National Health Insurance claims data of a nationally representative elderly sample. To reduce potential selection bias, we employed a propensity score matching method to classify the vaccination status into 3 groups. Multivariable logistic and linear regression models were used to compare the outcomes among different groups. Each group contained 8142 subjects. The results indicated that an additive effect of receiving both vaccines was associated with a significantly lower all-cause mortality (relative risk [RR]: 0.74; 95% confidence interval [CI]: 0.57-0.96), hospitalization of all diseases including pneumonia, influenza, chronic obstructive pulmonary disease, respiratory diseases, and congestive heart disease (RR: 0.77; 95% CI: 0.67-0.90), and a 13% reduction (95% CI: 0.81-0.94) in inpatient expenditures of all diseases when compared with receiving influenza vaccine alone. This study confirmed that vaccination of elderly individuals with pneumococcal vaccine and influenza vaccine concomitantly has substantial beneficial effects. Copyright © 2012 The British Infection Association. Published by Elsevier Ltd. All rights reserved.
Internal additive noise effects in stochastic resonance using organic field effect transistor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Yoshiharu; Asakawa, Naoki; Matsubara, Kiyohiko

Stochastic resonance phenomenon was observed in organic field effect transistor using poly(3-hexylthiophene), which enhances performance of signal transmission with application of noise. The enhancement of correlation coefficient between the input and output signals was low, and the variation of correlation coefficient was not remarkable with respect to the intensity of external noise, which was due to the existence of internal additive noise following the nonlinear threshold response. In other words, internal additive noise plays a positive role on the capability of approximately constant signal transmission regardless of noise intensity, which can be said “homeostatic” behavior or “noise robustness” against externalmore » noise. Furthermore, internal additive noise causes emergence of the stochastic resonance effect even on the threshold unit without internal additive noise on which the correlation coefficient usually decreases monotonically.« less
Additional Interventions to Enhance the Effectiveness of Individual Placement and Support: A Rapid Evidence Assessment

PubMed Central

Boycott, Naomi; Schneider, Justine; McMurran, Mary

2012-01-01

Topic. Additional interventions used to enhance the effectiveness of individual placement and support (IPS). Aim. To establish whether additional interventions improve the vocational outcomes of IPS alone for people with severe mental illness. Method. A rapid evidence assessment of the literature was conducted for studies where behavioural or psychological interventions have been used to supplement standard IPS. Published and unpublished empirical studies of IPS with additional interventions were considered for inclusion. Conclusions. Six published studies were found which compared IPS alone to IPS plus a supplementary intervention. Of these, three used skills training and three used cognitive remediation. The contribution of each discrete intervention is difficult to establish. Some evidence suggests that work-related social skills and cognitive training are effective adjuncts, but this is an area where large RCTs are required to yield conclusive evidence. PMID:22685665
Interactive effects of nutrient additions and predation on infaunal communities

USGS Publications Warehouse

Posey, M.H.; Alphin, T.D.; Cahoon, L.; Lindquist, D.; Becker, M.E.

1999-01-01

Nutrient additions represent an important anthropogenic stress on coastal ecosystems. At moderate levels, increased nutrients may lead to increased primary production and, possibly, to increased biomass of consumers although complex trophic interactions may modify or mask these effects. We examined the influence of nutrient additions and interactive effects of trophic interactions (predation) on benthic infaunal composition and abundances through small-scale field experiments in 2 estuaries that differed in ambient nutrient conditions. A blocked experimental design was used that allowed an assessment of direct nutrient effects in the presence and absence of predation by epibenthic predators as well as an assessment of the independent effects of predation. Benthic microalgal production increased with experimental nutrient additions and was greater when infaunal abundances were lower, but there were no significant interactions between these factors. Increased abundances of one infaunal taxa, Laeonereis culveri, as well as the grazer feeding guild were observed with nutrient additions and a number of taxa exhibited higher abundances with predator exclusion. In contrast to results from freshwater systems there were no significant interactive effects between nutrient additions and predator exclusion as was predicted. The infaunal responses observed here emphasize the importance of both bottom-up (nutrient addition and primary producer driven) and top-down (predation) controls in structuring benthic communities. These processes may work at different spatial and temporal scales, and affect different taxa, making observation of potential interactive effects difficult.
The effect of latanoprost on vitiligo: a preliminary comparative study.

PubMed

Anbar, Tag S; El-Ammawi, Tarek S; Abdel-Rahman, Amal T; Hanna, Michel R

2015-01-01

Latanoprost (LT), a prostaglandin F 2alpha (PGF2a ) analogue used in the treatment of glaucoma, was found to induce skin pigmentation in guinea pigs in addition to its known periocular and iridal pigmentation side effects. This study aims to evaluate the efficacy of topical LT in the induction of skin repigmentation in patients with vitiligo and to compare its potency with narrow band ultraviolet (UV) B (NB-UVB). The result of their combination was also assessed. This study involved 22 patients with bilateral and symmetrical vitiligo lesions, stable for the last three months, divided into three groups: group I, to evaluate LT vs. placebo; group II, to evaluate LT vs. NB-UVB; and group III, to evaluate the effect of their combination. The response to treatment was evaluated by taking photographic records of the treated lesions with follow-up photography every two weeks. After three months, assessment of the degree and extent of repigmentation was performed. Follow-up assessment was done six months after termination of the trial for the persistence of pigmentation, recurrence, or development of any side effects. LT was found to be better than placebo and comparable with the NB-UVB in inducing skin repigmentation. This effect was enhanced by the addition of NB-UVB. LT could be a promising treatment for vitiligo, especially the periocular variant. Its effect on skin repigmentation could be enhanced by NB-UVB exposure. © 2014 The International Society of Dermatology.
Validation of markers with non-additive effects on milk yield and fertility in Holstein and Jersey cows.

PubMed

Aliloo, Hassan; Pryce, Jennie E; González-Recio, Oscar; Cocks, Benjamin G; Hayes, Ben J

2015-07-22

It has been suggested that traits with low heritability, such as fertility, may have proportionately more genetic variation arising from non-additive effects than traits with higher heritability, such as milk yield. Here, we performed a large genome scan with 408,255 single nucleotide polymorphism (SNP) markers to identify chromosomal regions associated with additive, dominance and epistatic (pairwise additive × additive) variability in milk yield and a measure of fertility, calving interval, using records from a population of 7,055 Holstein cows. The results were subsequently validated in an independent set of 3,795 Jerseys. We identified genomic regions with validated additive effects on milk yield on Bos taurus autosomes (BTA) 5, 14 and 20, whereas SNPs with suggestive additive effects on fertility were observed on BTA 5, 9, 11, 18, 22, 27, 29 and the X chromosome. We also confirmed genome regions with suggestive dominance effects for milk yield (BTA 2, 3, 5, 26 and 27) and for fertility (BTA 1, 2, 3, 7, 23, 25 and 28). A number of significant epistatic effects for milk yield on BTA 14 were found across breeds. However on close inspection, these were likely to be associated with the mutation in the diacylglycerol O-acyltransferase 1 (DGAT1) gene, given that the associations were no longer significant when the additive effect of the DGAT1 mutation was included in the epistatic model. In general, we observed a low statistical power (high false discovery rates and small number of significant SNPs) for non-additive genetic effects compared with additive effects for both traits which could be an artefact of higher dependence on linkage disequilibrium between markers and causative mutations or smaller size of non-additive effects relative to additive effects. The results of our study suggest that individual non-additive effects make a small contribution to the genetic variation of milk yield and fertility. Although we found no individual mutation with large dominance
Coexposure to phytoestrogens and bisphenol a mimics estrogenic effects in an additive manner.

PubMed

Katchy, Anne; Pinto, Caroline; Jonsson, Philip; Nguyen-Vu, Trang; Pandelova, Marchela; Riu, Anne; Schramm, Karl-Werner; Samarov, Daniel; Gustafsson, Jan-Åke; Bondesson, Maria; Williams, Cecilia

2014-03-01

Endocrine-disrupting chemicals (EDC) are abundant in our environment. A number of EDCs, including bisphenol A (BPA) can bind to the estrogen receptors (ER), ERα and ERβ, and may contribute to estrogen-linked diseases such as breast cancer. Early exposure is of particular concern; many EDCs cross the placenta and infants have measurable levels of, eg, BPA. In addition, infants are frequently fed soy-based formula (SF) that contains phytoestrogens. Effects of combined exposure to xeno- and phytoestrogens are poorly studied. Here, we extensively compared to what extent BPA, genistein, and an extract of infant SF mimic estrogen-induced gene transcription and cell proliferation. We investigated ligand-specific effects on ER activation in HeLa-ERα and ERβ reporter cells; on proliferation, genome-wide gene regulation and non-ER-mediated effects in MCF7 breast cancer cells; and how coexposure influenced these effects. The biological relevance was explored using enrichment analyses of differentially regulated genes and clustering with clinical breast cancer profiles. We demonstrate that coexposure to BPA and genistein, or SF, results in increased functional and transcriptional estrogenic effects. Using statistical modeling, we determine that BPA and phytoestrogens act in an additive manner. The proliferative and transcriptional effects of the tested compounds mimic those of 17β-estradiol, and are abolished by cotreatment with an ER antagonist. Gene expression profiles induced by each compound clustered with poor prognosis breast cancer, indicating that exposure may adversely affect breast cancer prognosis. This study accentuates that coexposure to BPA and soy-based phytoestrogens results in additive estrogenic effects, and may contribute to estrogen-linked diseases, including breast cancer.
Coexposure to Phytoestrogens and Bisphenol A Mimics Estrogenic Effects in an Additive Manner

PubMed Central

Katchy, Anne; Pinto, Caroline; Williams, Cecilia

2014-01-01

Endocrine-disrupting chemicals (EDC) are abundant in our environment. A number of EDCs, including bisphenol A (BPA) can bind to the estrogen receptors (ER), ERα and ERβ, and may contribute to estrogen-linked diseases such as breast cancer. Early exposure is of particular concern; many EDCs cross the placenta and infants have measurable levels of, eg, BPA. In addition, infants are frequently fed soy-based formula (SF) that contains phytoestrogens. Effects of combined exposure to xeno- and phytoestrogens are poorly studied. Here, we extensively compared to what extent BPA, genistein, and an extract of infant SF mimic estrogen-induced gene transcription and cell proliferation. We investigated ligand-specific effects on ER activation in HeLa-ERα and ERβ reporter cells; on proliferation, genome-wide gene regulation and non-ER–mediated effects in MCF7 breast cancer cells; and how coexposure influenced these effects. The biological relevance was explored using enrichment analyses of differentially regulated genes and clustering with clinical breast cancer profiles. We demonstrate that coexposure to BPA and genistein, or SF, results in increased functional and transcriptional estrogenic effects. Using statistical modeling, we determine that BPA and phytoestrogens act in an additive manner. The proliferative and transcriptional effects of the tested compounds mimic those of 17β-estradiol, and are abolished by cotreatment with an ER antagonist. Gene expression profiles induced by each compound clustered with poor prognosis breast cancer, indicating that exposure may adversely affect breast cancer prognosis. This study accentuates that coexposure to BPA and soy-based phytoestrogens results in additive estrogenic effects, and may contribute to estrogen-linked diseases, including breast cancer. PMID:24284790
Likely additive ergogenic effects of combined preexercise dietary nitrate and caffeine ingestion in trained cyclists.

PubMed

Handzlik, Michal K; Gleeson, Michael

2013-01-01

Aims. To evaluate the possible additive effects of beetroot juice plus caffeine on exercise performance. Methods. In a randomized, double-blinded study design, fourteen healthy well-trained men aged 22 ± 3 years performed four trials on different occasions following preexercise ingestion of placebo (PLA), PLA plus 5 mg/kg caffeine (PLA+C), beetroot juice providing 8 mmol of nitrate (BR), and beetroot juice plus caffeine (BR+C). Participants cycled at 60% maximal oxygen uptake ([Formula: see text]max) for 30 min followed by a time to exhaustion (TTE) trial at 80% [Formula: see text]max. Saliva was collected before supplement ingestion, before exercise, and after the TTE trial for salivary nitrate, nitrite, and cortisol analysis. Results. In beetroot trials, saliva nitrate and nitrite increased >10-fold before exercise compared with preingestion (P ≤ 0.002). TTE in BR+C was 46% higher than in PLA (P = 0.096) and 18% and 27% nonsignificant TTE improvements were observed on BR+C compared with BR and PLA+C alone, respectively. Lower ratings of perceived exertion during TTE were found during 80% [Formula: see text]max on BR+C compared with PLA and PLA+C (P < 0.05 for both). Conclusions. Acute preexercise beetroot juice coingestion with caffeine likely has additive effects on exercise performance compared with either beetroot or caffeine alone.
AHRQ series paper 1: comparing medical interventions: AHRQ and the effective health-care program.

PubMed

Slutsky, Jean; Atkins, David; Chang, Stephanie; Sharp, Beth A Collins

2010-05-01

In 2005, the Agency for Healthcare Research and Quality established the Effective Health Care (EHC) Program. The EHC Program aims to provide understandable and actionable information for patients, clinicians, and policy makers. The Evidence-based Practice Centers are one of the cornerstones of the EHC Program. Three key elements guide the EHC Program and thus, the conduct of Comparative Effectiveness Reviews by the EPC Program. Comparative Effectiveness Reviews introduce several specific challenges in addition to the familiar issues raised in a systematic review or meta-analysis of a single intervention. The articles in this series together form the current Methods Guide for Comparative Effectiveness Reviews of the EHC Program.

Additive mixed effect model for recurrent gap time data.

PubMed

Ding, Jieli; Sun, Liuquan

2017-04-01

Gap times between recurrent events are often of primary interest in medical and observational studies. The additive hazards model, focusing on risk differences rather than risk ratios, has been widely used in practice. However, the marginal additive hazards model does not take the dependence among gap times into account. In this paper, we propose an additive mixed effect model to analyze gap time data, and the proposed model includes a subject-specific random effect to account for the dependence among the gap times. Estimating equation approaches are developed for parameter estimation, and the asymptotic properties of the resulting estimators are established. In addition, some graphical and numerical procedures are presented for model checking. The finite sample behavior of the proposed methods is evaluated through simulation studies, and an application to a data set from a clinic study on chronic granulomatous disease is provided.
Comparative Effect of an Addition of a Surface Term to Woods-Saxon Potential on Thermodynamics of a Nucleon

NASA Astrophysics Data System (ADS)

Lütfüoğlu, B. C.

2018-01-01

In this study, we reveal the difference between Woods-Saxon (WS) and Generalized Symmetric Woods-Saxon (GSWS) potentials in order to describe the physical properties of a nucleon, by means of solving Schrödinger equation for the two potentials. The additional term squeezes the WS potential well, which leads an upward shift in the spectrum, resulting in a more realistic picture. The resulting GSWS potential does not merely accommodate extra quasi bound states, but also has modified bound state spectrum. As an application, we apply the formalism to a real problem, an α particle confined in Bohrium-270 nucleus. The thermodynamic functions Helmholtz energy, entropy, internal energy, specific heat of the system are calculated and compared for both wells. The internal energy and the specific heat capacity increase as a result of upward shift in the spectrum. The shift of the Helmholtz free energy is a direct consequence of the shift of the spectrum. The entropy decreases because of a decrement in the number of available states. Supported by the Turkish Science and Research Council (TÜBİTAK) and Akdeniz University
Effects of additives on solidification of API separator sludge.

PubMed

Faschan, A; Tittlebaum, M; Cartledge, F; Eaton, H

1991-08-01

API separator sludge was solidified with various combinations of binders and absorbent soil additives. The binders utilized were Type I Portland Cement, Type C Flyash, and a 1:1 combination of the two. The soil additives used were bentonite, diatomite, Fuller's earth, and two brands of chemically altered bentonites, or organoclays. The effectiveness of the solidification materials was based on their effect on the physical and leaching characteristics of the sludge.It was determined the Portland cement and combination binders provided the sludge with adequate physical and strength characteristics. It was also determined the affinity of each additive for water had an important influence on the physical characteristics of the solidified sludge. The results of the leaching procedure indicated the binders alone reduced the leachability of organic constituents from the sludge by 1/5 to 1/10. It appeared the use of the additives with the binders may have further reduced the leachability of constituents from sludge, with the incorporation of the organoclay additives further reducing leachability by up to 1/2. Also, it appeared the absorbing capacity of the additives was directly related to their ability to reduce the leachability of organic constituents from the sludge.
Sulfate reduction in sulfuric material after re-flooding: Effectiveness of organic carbon addition and pH increase depends on soil properties.

PubMed

Yuan, Chaolei; Fitzpatrick, Rob; Mosley, Luke M; Marschner, Petra

2015-11-15

Sulfuric material is formed upon oxidation of sulfidic material; it is extremely acidic, and therefore, an environmental hazard. One option for increasing pH of sulfuric material may be stimulation of bacterial sulfate reduction. We investigated the effects of organic carbon addition and pH increase on sulfate reduction after re-flooding in ten sulfuric materials with four treatments: control, pH increase to 5.5 (+pH), organic carbon addition with 2% w/w finely ground wheat straw (+C), and organic carbon addition and pH increase (+C+pH). After 36 weeks, in five of the ten soils, only treatment +C+pH significantly increased the concentration of reduced inorganic sulfur (RIS) compared to the control and increased the soil pore water pH compared to treatment+pH. In four other soils, pH increase or/and organic carbon addition had no significant effect on RIS concentration compared to the control. The RIS concentration in treatment +C+pH as percentage of the control was negatively correlated with soil clay content and initial nitrate concentration. The results suggest that organic carbon addition and pH increase can stimulate sulfate reduction after re-flooding, but the effectiveness of this treatment depends on soil properties. Copyright © 2015 Elsevier B.V. All rights reserved.
Effect of addition of different nano-clays on the fumed silica-polyethylene glycol based shear-thickening fluids

NASA Astrophysics Data System (ADS)

Singh, Mansi; Mehta, Rajeev; Verma, Sanjeev K.; Biswas, Ipsita

2018-01-01

A comparative study of the rheology of shear thickening suspensions of 20% fumed silica in polyethylene glycol (PEG200) with different nano clays as additives has been done. The nano-clays used are montmorillonite (MMT), Closite15A, Kaolin and Halloysite clay. The objective was to study the effect of relatively cost-effective clays as a partial substitute of silica. Specifically, the effect of type, concentration, temperature and frequency were considered. The results indicate that the shear thickening properties of Closite15A as additive in temperature ranges of 25 °C-45 °C performs the best and Halloysite performs best at higher (55 °C) and lower temperatures (5, 15 °C). The elasticity effects in dynamic experiments were markedly enhanced by Halloysite clay addition. Addition of MMT, however, led to insignificant enhancement in critical viscosity in steady-state as well as dynamic state-rheology. Interestingly, shear thickening fluid (STF) with all clay except MMT was stable after storing for more than a month. These findings indicate that the introduction of nano-clay as additives is a promising and cost effective method for enhancing the STF behavior which can be utilized in high impact resistant (about 3000% strain and 300 rad s-1 frequency) applications.
[Effects of superphosphate addition on NH3 and greenhouse gas emissions during vegetable waste composting].

PubMed

Yang, Yan; Sun, Qin-ping; Li, Ni; Liu, Chun-sheng; Li, Ji-jin; Liu, Ben-sheng; Zou, Guo-yuan

2015-01-01

To study the effects of superphosphate (SP) on the NH, and greenhouse gas emissions, vegetable waste composting was performed for 27 days using 6 different treatments. In addition to the controls, five vegetable waste mixtures (0.77 m3 each) were treated with different amounts of the SP additive, namely, 5%, 10%, 15%, 20% and 25%. The ammonia volatilization loss and greenhouse gas emissions were measured during composting. Results indicated that the SP additive significantly decreased the ammonia volatilization and greenhouse gas emissions during vegetable waste composting. The additive reduced the total NH3 emission by 4.0% to 16.7%. The total greenhouse gas emissions (CO2-eq) of all treatments with SP additives were decreased by 10.2% to 20.8%, as compared with the controls. The NH3 emission during vegetable waste composting had the highest contribution to the greenhouse effect caused by the four different gases. The amount of NH3 (CO2-eq) from each treatment ranged from 59.90 kg . t-1 to 81.58 kg . t-1; NH3(CO2-eq) accounted for 69% to 77% of the total emissions from the four gases. Therefore, SP is a cost-effective phosphorus-based fertilizer that can be used as an additive during vegetable waste composting to reduce the NH3 and greenhouse gas emissions as well as to improve the value of compost as a fertilizer.
Effect of a phytogenic feed additive on the susceptibility of Onchorhynchus mykiss to Aeromonas salmonicida.

PubMed

Menanteau-Ledouble, S; Krauss, I; Santos, G; Fibi, S; Weber, B; El-Matbouli, M

2015-06-29

In recent years, feed additives have increasingly been adopted by the aquaculture industry. These supplements not only offer an alternative to antibiotics but have also been linked to enhanced growth performance. However, the literature is still limited and provides contradictory information on their effectiveness. This is mainly due to the wide variety of available products and their complex mechanisms of action. Phytogenic feed additives have been shown to have antimicrobial effects and can improve growth performance. In the present study, we investigated the susceptibility of several fish pathogenic bacteria to a phytogenic essential oil product in vitro. In addition, we determined the protective effect of a commercial phytogenic feed additive containing oregano, anis and citrus oils on the resistance of rainbow trout Oncorhynchus mykiss to infection by Aeromonas salmonicida. The bacterium was administered through 3 different routes: intra-peritoneal injection, immersion in a bacterial solution and cohabitation with infected fish. Mortality rates were significantly lower in infected rainbow trout that had received the feed additive: the overall mortality rate across all routes of infection was 18% in fish fed a diet containing the additive compared to 37% in fish that received unsupplemented feed. The route of infection also significantly impacted mortality, with average mortality rates of 60, 17.5 and 5% for intra-peritoneal injection, immersion and cohabitation, respectively. In general, fish were better protected against infection by immersion than infection by injection.
Litter Decomposition in a Semiarid Dune Grassland: Neutral Effect of Water Supply and Inhibitory Effect of Nitrogen Addition.

PubMed

Li, Yulin; Ning, Zhiying; Cui, Duo; Mao, Wei; Bi, Jingdong; Zhao, Xueyong

2016-01-01

The decomposition of plant material in arid ecosystems is considered to be substantially controlled by water and N availability. The responses of litter decomposition to external N and water, however, remain controversial, and the interactive effects of supplementary N and water also have been largely unexamined. A 3.5-year field experiment with supplementary nitrogen and water was conducted to assess the effects of N and water addition on mass loss and nitrogen release in leaves and fine roots of three dominant plant species (i.e., Artemisia halondendron, Setaria viridis, and Phragmites australis) with contrasting substrate chemistry (e.g. N concentration, lignin content in this study) in a desertified dune grassland of Inner Mongolia, China. The treatments included N addition, water addition, combination of N and water, and an untreated control. The decomposition rate in both leaves and roots was related to the initial litter N and lignin concentrations of the three species. However, litter quality did not explain the slower mass loss in roots than in leaves in the present study, and thus warrant further research. Nitrogen addition, either alone or in combination with water, significantly inhibited dry mass loss and N release in the leaves and roots of the three species, whereas water input had little effect on the decomposition of leaf litter and fine roots, suggesting that there was no interactive effect of supplementary N and water on litter decomposition in this system. Furthermore, our results clearly indicate that the inhibitory effects of external N on dry mass loss and nitrogen release are relatively strong in high-lignin litter compared with low-lignin litter. These findings suggest that increasing precipitation hardly facilitates ecosystem carbon turnover but atmospheric N deposition can enhance carbon sequestration and nitrogen retention in desertified dune grasslands of northern China. Additionally, litter quality of plant species should be considered
Litter Decomposition in a Semiarid Dune Grassland: Neutral Effect of Water Supply and Inhibitory Effect of Nitrogen Addition

PubMed Central

Li, Yulin; Ning, Zhiying; Cui, Duo; Mao, Wei; Bi, Jingdong; Zhao, Xueyong

2016-01-01

Background The decomposition of plant material in arid ecosystems is considered to be substantially controlled by water and N availability. The responses of litter decomposition to external N and water, however, remain controversial, and the interactive effects of supplementary N and water also have been largely unexamined. Methodology/Principal Findings A 3.5-year field experiment with supplementary nitrogen and water was conducted to assess the effects of N and water addition on mass loss and nitrogen release in leaves and fine roots of three dominant plant species (i.e., Artemisia halondendron, Setaria viridis, and Phragmites australis) with contrasting substrate chemistry (e.g. N concentration, lignin content in this study) in a desertified dune grassland of Inner Mongolia, China. The treatments included N addition, water addition, combination of N and water, and an untreated control. The decomposition rate in both leaves and roots was related to the initial litter N and lignin concentrations of the three species. However, litter quality did not explain the slower mass loss in roots than in leaves in the present study, and thus warrant further research. Nitrogen addition, either alone or in combination with water, significantly inhibited dry mass loss and N release in the leaves and roots of the three species, whereas water input had little effect on the decomposition of leaf litter and fine roots, suggesting that there was no interactive effect of supplementary N and water on litter decomposition in this system. Furthermore, our results clearly indicate that the inhibitory effects of external N on dry mass loss and nitrogen release are relatively strong in high-lignin litter compared with low-lignin litter. Conclusion/Significance These findings suggest that increasing precipitation hardly facilitates ecosystem carbon turnover but atmospheric N deposition can enhance carbon sequestration and nitrogen retention in desertified dune grasslands of northern China
The effect of hydrophilicity of graphene oxide as additive towards performance of polysulfone membrane

NASA Astrophysics Data System (ADS)

Jamalludin, Mohd Riduan; Harun, Zawati; Zakaria, M. S.; Rahim, Wan Mohd Faizal Wan Abd; Khor, C. Y.; Rosli, M. U.; Ishak, Muhammad Ikman; Nawi, M. A. M.; Shahrin, Suhaimi

2017-09-01

This study investigates the effect of hydrophilicity of graphene oxide as additive towards properties and performance on polysulfone (PSf) membrane. A polysulfone (PSf) membrane containing graphene oxide (GO) with different content was prepared via phase inversion technique. Characterization on the fabricated membrane were water contact angle measurement, porosity and mean pore size. The effects of PSf/GO were further investigated in terms of permeation test, rejection test and antifouling test. Based on the result obtained, PSf membrane incorporating with GO additive shows better capability to permeate more water compared to unfilled PSf membrane. The PSf/GO membrane were able to increase the permeate rate rapidly with the highest value is given by sample 4 (consist of 0.7 g of GO) at 571.78 J/m2h. Furthermore, water contact angle confirmed the hydrophilicity of this membrane at 62°. The transmembrane fouling activity showed that GO embedded in PSf membrane has improved tremendously. In addition, this study revealed that 0.7g of GO had the highest permeation test, rejection test and antifouling test.
The comparative effectiveness and cost-effectiveness of vitreoretinal interventions.

PubMed

Brown, Melissa M; Brown, Gary C; Brown, Heidi C; Irwin, Blair; Brown, Kathryn S

2008-05-01

The comparative effectiveness of medical interventions has recently been emphasized in the literature, typically for interventions in a similar class. Value-based medicine, the practice of medicine based on the value (improvement in quality of life and/or length of life) conferred by medical interventions, allows a measure of comparative effectiveness of interventions across all of health care, no matter how disparate. This report discusses recent comparative effectiveness studies in the vitreoretinal literature. Vitreoretinal interventions have good to excellent comparative effectiveness compared with commonly utilized interventions across health care, such as treatment for osteoporosis and hyperlipidemia. They also tend to be cost-effective when an upper limit of $100 000/quality-adjusted life-year is utilized. Value can be measured using either or both of two outcomes - the quality-adjusted life-year gain and/or the percentage improvement in value - both of which allow for an evaluation of comparative effectiveness, which can be compared on the same scale for every intervention. This value can also be integrated with costs using the outcome of dollars expended per quality-adjusted life-year ($/quality-adjusted life-year, or the cost-utility ratio), which allows a comparison of cost-effectiveness across all interventions. The majority of vitreoretinal interventions confer considerable value and are cost-effective.
Effect of additives and steaming on quality of air dried noodles.

PubMed

Gatade, Abhijeet Arun; Sahoo, Akshaya Kumar

2015-12-01

Texture is the most important property for consumer acceptance in cooked noodles. The air dried noodles are known to have higher cooking loss and cooking time, to that of instant fried noodles. But the fat content of instant fried noodles is more. In the present work attempts were made to optimize the moisture content so as to obtain a smooth dough for extruded noodle preparation and develop air dried noodles of low fat content with lesser cooking loss and cooking time. To meet the objectives, the effect of various additives and steaming treatment on cooking quality, sensory attributes, textural properties and microstructure of noodles were studied. Dough prepared by addition of 40 ml water to 100 g flour resulted into formation of a soft dough, leading to production of noodles of improved surface smoothness and maximum yield. The use of additives (5 g oil, 0.2 g guar gum, 2 g gluten and 1 ml of 1 % kansui solution for 100 g of flour) and steaming treatment showed significant effect on noodles quality, with respect to cooking characteristics, sensory attributes and textural properties. The microstructure images justified the positive correlation between the effects of ingredients with steaming and quality parameters of noodles. Air dried noodles with reduced cooking loss (~50 % reduction) with marginal reduction in cooking time was developed, which were having similar characteristics to that of instant fried noodles. Compared to the instant fried noodle, the prepared air dried noodle was having substantially reduced fat content (~70 % reduction). Thus the present study will be useful for guiding extrusion processes for production of air dried noodles having less cooking time and low fat content.
Study on thermal effects & sulfurized additives, in lubricating greases

NASA Astrophysics Data System (ADS)

Shah, Ami Atul

Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to
Effect of salt additives on concrete degradation : interim report

DOT National Transportation Integrated Search

1993-06-01

Many chemical additives designed to inhibit the corrosive effect of salt on rebars are being marketed. Their effect on Portland Cement Concrete is neither known nor understood. This study is an attempt to determine if there is an effect and to unders...
Toward Enhancing Solar Cell Performance: An Effective and "Green" Additive.

PubMed

Tan, Long; Li, Pandeng; Zhang, Qingzhe; Izquierdo, Ricardo; Chaker, Mohamed; Ma, Dongling

2018-02-21

Performance of bulk heterojunction polymer solar cells (PSCs) highly relies on the morphology of the photoactive layer involving conjugated polymers and fullerene derivatives as donors and acceptors, respectively. Herein, butylamine was found to be able to optimize the morphology of the donor/acceptor (D/A) film composed of a blend of poly(3-hexylthiophene-2,5-diyl) (P3HT) and phenyl-C 61 -butyric acid methyl ester (PCBM). Compared to the commonly used alkane dithiols and halogenated additives with high boiling points, butylamine has a much lower boiling point between 77 and 79 °C, and it is also much "greener". A specific interaction between butylamine and PCBM was demonstrated to account for the morphology improvement. Essentially, butylamine can selectively dissolve PCBM in the P3HT:PCBM blend and facilitate the diffusion of PCBM in the film fabrication processes. Atomic force microscopy and X-ray photoelectron spectroscopy investigations confirmed the formation of the P3HT-enriched top surface and the abundance of PCBM at the bottom side, i.e., the formation of vertical phase segregation, as a consequence of the specific PCBM-butylamine interaction. The D/A film with inhomogeneously distributed D and A components in the vertical film direction, with more P3HT at the hole extraction side and more PCBM at the electron extraction side, enables more efficient charge extraction in the D/A film, reflected by the largely enhanced fill factor. The power conversion efficiency of devices reached 4.03 and 4.61%, respectively, depending on the thickness of the D/A film, and these are among the best values reported for P3HT:PCBM-based devices. As compared to the devices fabricated without the introduction of butylamine under otherwise the same processing conditions, they represented 19.6 and 21.6% improvement in the efficiency, respectively. The discovery of butylamine as a new, effective additive in enhancing the performance of PSCs strongly suggests that the differential
Effects of various additives on sintering of aluminum nitride

NASA Technical Reports Server (NTRS)

Komeya, K.; Inoue, H.; Tsuge, A.

1982-01-01

Effects of thirty additives on sintering A/N were investigated. The addition of alkali earth oxides and rare earth oxides gave fully densified aluminum nitride. This is due to the formation of nitrogen-containing aluminate liquid in the system aluminum nitride-alkali earth oxides or rare earth oxides. Microstructural studies of the sintered specimens with the above two types of additives suggested that the densification was due to the liquid phase sintering. Additions of silicon compounds resulted in poor densification by the formation of highly refractory compounds such as A/N polytypes.
Effectiveness of additional self-care acupressure for women with menstrual pain compared to usual care alone: using stakeholder engagement to design a pragmatic randomized trial and study protocol.

PubMed

Blödt, Susanne; Schützler, Lena; Huang, Wenjing; Pach, Daniel; Brinkhaus, Benno; Hummelsberger, Josef; Kirschbaum, Barbara; Kuhlmann, Kirsten; Lao, Lixing; Liang, Fanrong; Mietzner, Anna; Mittring, Nadine; Müller, Sabine; Paul, Anna; Pimpao-Niederle, Carolina; Roll, Stephanie; Wu, Huangan; Zhu, Jiang; Witt, Claudia M

2013-04-11

Self-care acupressure might be successful in treating menstrual pain, which is common among young women. There is a need for comparative effectiveness research with stakeholder engagement in all phases seeking to address the needs of decision-makers. Our aim was to design a study on the effectiveness of additional self-care acupressure for menstrual pain comparing usual care alone using different methods of stakeholder engagement. The study was designed using multiple mixed methods for stakeholder engagement. Based on the results of a survey and focus group discussion, a stakeholder advisory group developed the study design. Stakeholder engagement resulted in a two-arm pragmatic randomized trial. Two hundred and twenty women aged 18 to 25 years with menstrual pain will be included in the study. Outcome measurement will be done using electronic questionnaires provided by a study specific mobile application (App). Primary outcome will be the mean pain intensity at the days of pain during the third menstruation after therapy start. Stakeholder engagement helped to develop a study design that better serves the needs of decision makers, including an App as a modern tool for both intervention and data collection in a young target group. Clinicaltrials.gov identifier http://NCT01582724.
Effect of fiber addition on slow crack growth of a dental porcelain.

PubMed

de Araújo, Maico Dutra; Miranda, Ranulfo Benedito de Paula; Fredericci, Catia; Yoshimura, Humberto Naoyuki; Cesar, Paulo Francisco

2015-04-01

To evaluate the effect of the processing method (conventional sintering, S, and heat-pressing, HP) and addition of potassium titanate fibers, PTF, on the microstructure, mechanical properties (flexural strength, σf, and Weibull parameters, m and σ5%), slow crack growth parameters n (stress corrosion susceptibility coefficient), and optical properties (translucency parameter, TP, and opalescence index, OI) of a feldsphatic dental porcelain. Disks (n = 240, Ø12 × 1 mm) of porcelain (Vintage-Halo, Shofu) were produced using S and HP methods with and without addition of 10 wt% (conventional sintering) or 5 wt% (heat-pressing) of PTF. For the S method, porcelain was sintered in a conventional furnace. In the HP technique, refractory molds were produced by lost wax technique. The porcelain slurry was dry-pressed (3t/30s) to form a cylinder with 12 mm (diameter) and 20mm (height), which was heat-pressed for 5 min/3.5 bar into the mold. Specimens were tested for biaxial flexural strength in artificial saliva at 37°C. Weibull analysis was used to determine m and σ5%. Slow crack growth (SCG) parameters were determined by the dynamic fatigue test, and specimens were tested in biaxial flexure at five stress rates: 10(-2), 10(-1), 10(0), 10(1) and 10(2)MPa/s (n=10), immersed in artificial saliva at 37°C. Parameter n was calculated and statistically analyzed according to ASTM F394-78. Optical properties were determined in a spectrophotometer in the diffuse reflectance mode. The highest n value was obtained by the combination of heat-pressing with fiber addition (37.1) and this value was significantly higher than those obtained by both sintered groups (26.2 for control group and 27.7 for sintered with fiber). Although heat-pressing alone also resulted in higher n values compared to the sintered groups, there were no significant differences among them. Fiber addition had no effect on mechanical strength, but it resulted in decreased TP values and increased OI values for
Pairwise-additive hydrophobic effect for alkanes in water

PubMed Central

Wu, Jianzhong; Prausnitz, John M.

2008-01-01

Pairwise additivity of the hydrophobic effect is indicated by reliable experimental Henry's constants for a large number of linear and branched low-molecular-weight alkanes in water. Pairwise additivity suggests that the hydrophobic effect is primarily a local phenomenon and that the hydrophobic interaction may be represented by a semiempirical force field. By representing the hydrophobic potential between two methane molecules as a linear function of the overlap volume of the hydration layers, we find that the contact value of the hydrophobic potential (−0.72 kcal/mol) is smaller than that from quantum mechanics simulations (−2.8 kcal/mol) but is close to that from classical molecular dynamics (−0.5∼−0.9 kcal/mol). PMID:18599448
The Additive Effects of Core Muscle Strengthening and Trunk NMES on Trunk Balance in Stroke Patients

PubMed Central

Ko, Eun Jae; Kim, Dae Yul; Yi, Jin Hwa; Kim, Won; Hong, Jayoung

2016-01-01

Objective To investigate an additive effect of core muscle strengthening (CMS) and trunk neuromuscular electrical stimulation (tNEMS) on trunk balance in stroke patients. Methods Thirty patients with acute or subacute stroke who were unable to maintain static sitting balance for >5 minutes were enrolled and randomly assigned to 3 groups, i.e., patients in the CMS (n=10) group received additional CMS program; the tNMES group (n=10) received additional tNMES over the posterior back muscles; and the combination (CMS and tNMES) group (n=10) received both treatments. Each additional treatment was performed 3 times per week for 20 minutes per day over 3 weeks. Korean version of Berg Balance Scale (K-BBS), total score of postural assessment scale for stroke patients (PASS), Trunk Impairment Scale (TIS), and Korean version of Modified Barthel Index (K-MBI) were evaluated before and after 3 weeks of therapeutic intervention. Results All 3 groups showed improvements in K-BBS, PASS, TIS, and K-MBI after therapeutic interventions, with some differences. The combination group showed more improvements in K-BBS and the dynamic sitting balance of TIS, as compared to the CMS group; and more improvement in K-BBS, as compared to the tNMES group. Conclusion The results indicated an additive effect of CMS and tNMES on the recovery of trunk balance in patients with acute or subacute stroke who have poor sitting balance. Simultaneous application of CMS and tNMES should be considered when designing a rehabilitation program to improve trunk balance in stroke patients. PMID:26949681

Comparative shock response of additively manufactured versus conventionally wrought 304L stainless steel

NASA Astrophysics Data System (ADS)

Wise, J. L.; Adams, D. P.; Nishida, E. E.; Song, B.; Maguire, M. C.; Carroll, J.; Reedlunn, B.; Bishop, J. E.; Palmer, T. A.

2017-01-01

Gas-gun experiments have probed the compression and release behavior of impact-loaded 304L stainless steel specimens that were machined from additively manufactured (AM) blocks as well as baseline ingot-derived bar stock. The AM technology permits direct fabrication of net- or near-net-shape metal parts. For the present investigation, velocity interferometer (VISAR) diagnostics provided time-resolved measurements of sample response for one-dimensional (i.e., uniaxial strain) shock compression to peak stresses ranging from 0.2 to 7.0 GPa. The acquired wave-profile data have been analyzed to determine the comparative Hugoniot Elastic Limit (HEL), Hugoniot equation of state, spall strength, and high-pressure yield strength of the AM and conventional materials. The possible contributions of various factors, such as composition, porosity, microstructure (e.g., grain size and morphology), residual stress, and/or sample axis orientation relative to the additive manufacturing deposition trajectory, are considered to explain differences between the AM and baseline 304L dynamic material results.
Doubly Robust Additive Hazards Models to Estimate Effects of a Continuous Exposure on Survival.

PubMed

Wang, Yan; Lee, Mihye; Liu, Pengfei; Shi, Liuhua; Yu, Zhi; Abu Awad, Yara; Zanobetti, Antonella; Schwartz, Joel D

2017-11-01

The effect of an exposure on survival can be biased when the regression model is misspecified. Hazard difference is easier to use in risk assessment than hazard ratio and has a clearer interpretation in the assessment of effect modifications. We proposed two doubly robust additive hazards models to estimate the causal hazard difference of a continuous exposure on survival. The first model is an inverse probability-weighted additive hazards regression. The second model is an extension of the doubly robust estimator for binary exposures by categorizing the continuous exposure. We compared these with the marginal structural model and outcome regression with correct and incorrect model specifications using simulations. We applied doubly robust additive hazard models to the estimation of hazard difference of long-term exposure to PM2.5 (particulate matter with an aerodynamic diameter less than or equal to 2.5 microns) on survival using a large cohort of 13 million older adults residing in seven states of the Southeastern United States. We showed that the proposed approaches are doubly robust. We found that each 1 μg m increase in annual PM2.5 exposure was associated with a causal hazard difference in mortality of 8.0 × 10 (95% confidence interval 7.4 × 10, 8.7 × 10), which was modified by age, medical history, socioeconomic status, and urbanicity. The overall hazard difference translates to approximately 5.5 (5.1, 6.0) thousand deaths per year in the study population. The proposed approaches improve the robustness of the additive hazards model and produce a novel additive causal estimate of PM2.5 on survival and several additive effect modifications, including social inequality.
Effects of xanthan, guar, carrageenan and locust bean gum addition on physical, chemical and sensory properties of meatballs.

PubMed

Demirci, Zeynep Ozben; Yılmaz, Ismail; Demirci, Ahmet Şukru

2014-05-01

This study evaluated the effects of xanthan gum, guar gum, carrageenan and locust bean gum on physical, chemical and sensory properties of meatballs. Meatball samples were produced with three different formulations including of 0.5, 1, and 1.5% each gum addition and gum added samples were compared with the control meatballs. Physical and chemical analyses were carried out on raw and cooked samples separately. Moisture contents of raw samples decreased by addition of gums. There were significant decreases (p < 0.05) in moisture and fat contents of raw and cooked meatball samples formulated with gum when compared with control. Ash contents and texture values increased with gum addition to meatballs. Meatball redness decreased with more gum addition in raw and cooked meatball samples, which means that addition of gums resulted in a lighter-coloured product. According to sensory analysis results, locust bean gum added (1%) samples were much preferred by the panelists.
Studies for understanding effects of additions on the strength of cement concrete

NASA Astrophysics Data System (ADS)

Bucur, R. D.; Barbuta, M.; Konvalina, P.; Serbanoiu, A. A.; Bernas, J.

2017-09-01

The paper analyzes the effects of different types of additions introduced in concrete mix on the compressive strength. The current studies show that additions contribute to improve some characteristics of concrete and to reduce the cement dosage, so it can obtain concretes which are cheaper and friendlier with environment. In the experimental mixes were introduced: crushed natural aggregates, slag aggregates, silica fume, fly ash, chopped tire, polystyrene granule, glass fibers and metallic fibers. The experimental values of compressive strengths were compared for two concrete grades (C20/25 and C25/30). The study shown that near the well-known possibilities of improving mechanical strengths of cement concrete by increasing cement dosage and strength, by using crushed aggregates and by reducing the water/cement ratio, there are other methods in which less cement is used by replacing it with different wastes or by adding fiber.
The Additive Effects of Choice and Control.

ERIC Educational Resources Information Center

Karbowski, Joseph; And Others

In separate research studies, students who were given a choice of learning materials or who had control over aversive noise, demonstrated higher motivation and better task performance. To investigate the additive effects of choice and control on perception of control, 80 male and female college students participated in a 2 (choice vs. no-choice) X…
Evaluating the effects of phytoremediation with biochar additions on soil nitrogen mineralization enzymes and fungi.

PubMed

Zhang, Manyun; Wang, Jun; Bai, Shahla Hosseini; Teng, Ying; Xu, Zhihong

2018-06-02

Phytoremediation with biochar addition might alleviate pollutant toxicity to soil microorganism. It is uncertain to what extent biochar addition rate could affect activities of enzymes related to soil nitrogen (N) mineralization and alter fungal community under the phytoremediation. This study aimed to reveal the effects of Medicago sativa L. (alfalfa) phytoremediation, alone or with biochar additions, on soil protease and chitinase and fungal community and link the responses of microbial parameters with biochar addition rates. The alfalfa phytoremediation enhanced soil protease activities, and relative to the phytoremediation alone, biochar additions had inconsistent impacts on the corresponding functional gene abundances. Compared with the blank control, alfalfa phytoremediation, alone or with biochar additions, increased fungal biomass and community richness estimators. Moreover, relative to the phytoremediation alone, the relative abundances of phylum Zygomycota were also increased by biochar additions. The whole soil fungal community was not significantly changed by the alfalfa phytoremediation alone, but was indeed changed by alfalfa phytoremediation with 3.0% (w/w) or 6.0% biochar addition. This study suggested that alfalfa phytoremediation could enhance N mineralization enzyme activities and that biochar addition rates affected the responses of fungal community to the alfalfa phytoremediation.
Geometrical accuracy of metallic objects produced with additive or subtractive manufacturing: A comparative in vitro study.

PubMed

Braian, Michael; Jönsson, David; Kevci, Mir; Wennerberg, Ann

2018-07-01

To evaluate the accuracy and precision of objects produced by additive manufacturing systems (AM) for use in dentistry and to compare with subtractive manufacturing systems (SM). Ten specimens of two geometrical objects were produced by five different AM machines and one SM machine. Object A mimics an inlay-shaped object, while object B imitates a four-unit bridge model. All the objects were sorted into different measurement dimensions (x, y, z), linear distances, angles and corner radius. None of the additive manufacturing or subtractive manufacturing groups presented a perfect match to the CAD file with regard to all parameters included in the present study. Considering linear measurements, the precision for subtractive manufacturing group was consistent in all axes for object A, presenting results of <0.050mm. The additive manufacturing groups had consistent precision in the x-axis and y-axis but not in the z-axis. With regard to corner radius measurements, the SM group had the best overall accuracy and precision for both objects A and B when compared to the AM groups. Within the limitations of this in vitro study, the conclusion can be made that subtractive manufacturing presented overall precision on all measurements below 0.050mm. The AM machines also presented fairly good precision, <0.150mm, on all axes except for the z-axis. Knowledge regarding accuracy and precision for different production techniques utilized in dentistry is of great clinical importance. The dental community has moved from casting to milling and additive techniques are now being implemented. Thus all these production techniques need to be tested, compared and validated. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.
Additive effect of multiple pharmacological chaperones on maturation of CFTR processing mutants

PubMed Central

Wang, Ying; Loo, Tip W.; Bartlett, M. Claire; Clarke, David M.

2007-01-01

The most common cause of CF (cystic fibrosis) is the deletion of Phe508 (ΔF508) in the CFTR [CF TM (transmembrane) conductance regulator] chloride channel. One major problem with ΔF508 CFTR is that the protein is defective in folding so that little mature protein is delivered to the cell surface. Expression of ΔF508 CFTR in the presence of small molecules known as correctors or pharmacological chaperones can increase the level of mature protein. Unfortunately, the efficiency of corrector-induced maturation of ΔF508 CFTR is probably too low to have therapeutic value and approaches are needed to increase maturation efficiency. We postulated that expression of ΔF508 CFTR in the presence of multiple correctors that bound to different sites may have an additive effect on maturation. In support of this mechanism, we found that expression of P-glycoprotein (CFTR's sister protein) processing mutants in the presence of two compounds that bind to different sites (rhodamine B and Hoechst 33342) had an additive effect on maturation. Therefore we tested whether expression of ΔF508 CFTR in the presence of combinations of three different classes of corrector molecules would increase its maturation efficiency. It was found that the combination of the quinazoline VRT-325 together with the thiazole corr-2b or bisaminomethylbithiazole corr-4a doubled the steady-state maturation efficiency of ΔF508 CFTR (approx. 40% of total CFTR was mature protein) compared with expression in the presence of a single compound. The additive effect of the correctors on ΔF508 CFTR maturation suggests that they directly interact at different sites of the protein. PMID:17535157
Effects of some polymeric additives on the cocrystallization of caffeine

NASA Astrophysics Data System (ADS)

Chung, Jihae; Kim, Il Won

2011-11-01

Effects of polymeric additives on the model cocrystallization were examined. The model cocrystal was made from caffeine and oxalic acid, and poly(ethylene glycol) (PEG), poly( L-lactide) (PLLA), poly(ɛ-caprolactone) (PCL), and poly(acrylic acid) (PAA) were the additives. The cocrystals were formed as millimeter-sized crystals without additives, and they became microcrystals with PLLA and PCL, and nanocrystals with PAA. XRD and IR revealed that the cocrystal structure was unchanged despite the strong effects of the additives on the crystal morphology, although some decrease in crystallinity was observed with PAA as confirmed by DSC. The DSC study also showed that the cocrystal melted and recrystallized to form α-caffeine upon heating. The present study verified that the polymeric additives can be utilized to modulate the size and morphology of the cocrystals without interfering the intermolecular interactions essential to the integrity of the cocrystal structures.
Additivity vs Synergism: Investigation of the Additive Interaction of Cinnamon Bark Oil and Meropenem in Combinatory Therapy.

PubMed

Yang, Shun-Kai; Yusoff, Khatijah; Mai, Chun-Wai; Lim, Wei-Meng; Yap, Wai-Sum; Lim, Swee-Hua Erin; Lai, Kok-Song

2017-11-04

Combinatory therapies have been commonly applied in the clinical setting to tackle multi-drug resistant bacterial infections and these have frequently proven to be effective. Specifically, combinatory therapies resulting in synergistic interactions between antibiotics and adjuvant have been the main focus due to their effectiveness, sidelining the effects of additivity, which also lowers the minimal effective dosage of either antimicrobial agent. Thus, this study was undertaken to look at the effects of additivity between essential oils and antibiotic, via the use of cinnamon bark essential oil (CBO) and meropenem as a model for additivity. Comparisons between synergistic and additive interaction of CBO were performed in terms of the ability of CBO to disrupt bacterial membrane, via zeta potential measurement, outer membrane permeability assay and scanning electron microscopy. It has been found that the additivity interaction between CBO and meropenem showed similar membrane disruption ability when compared to those synergistic combinations which was previously reported. Hence, results based on our studies strongly suggest that additive interaction acts on a par with synergistic interaction. Therefore, further investigation in additive interaction between antibiotics and adjuvant should be performed for a more in depth understanding of the mechanism and the impacts of such interaction.
Relative effectiveness of additive pain interventions during vaccination in infants

PubMed Central

Taddio, Anna; Riddell, Rebecca Pillai; Ipp, Moshe; Moss, Steven; Baker, Stephen; Tolkin, Jonathan; Malini, Dave; Feerasta, Sharmeen; Govan, Preeya; Fletcher, Emma; Wong, Horace; McNair, Caitlin; Mithal, Priyanjali; Stephens, Derek

2017-01-01

BACKGROUND: Vaccine injections can cause acute pain and distress in infants, which can contribute to dissatisfaction with the vaccination experience and vaccine hesitancy. We sought to compare the effectiveness of additive pain interventions administered consistently during vaccine injections in the first year of life. METHODS: We conducted a multicentre, longitudinal, double-blind, add-on, randomized controlled trial. Healthy infants were randomly assigned to 1 of 4 levels of pain management for all vaccine injections at 2, 4, 6 and 12 months: (i) placebo control; (ii) parent-directed video education about infant soothing; (iii) the video plus sucrose administered orally or (iv) the video plus sucrose plus liposomal lidocaine applied topically. All infants benefit from injection techniques that minimize pain. We used a double-dummy design; hence all parents watched a video (active psychological intervention or placebo) and all infants received oral solution (sucrose or placebo) and topical cream (lidocaine or placebo). We assessed infant distress during 3 phases — preinjection (baseline), vaccine injection (needle), and 1 minute postinjection (recovery) — using the Modified Behavioural Pain Scale (range 0–10). We compared scores between groups and across infant ages using a mixed-model repeated-measures analysis. RESULTS: A total of 352 infants participated in the study, from Jan. 17, 2012, to Feb. 2, 2016. Demographics did not differ among intervention groups (p > 0.05). Baseline pain scores did not differ among intervention groups (p = 0.4), but did differ across ages (p < 0.001). Needle pain scores differed among groups (p = 0.003) and across ages (p < 0.001). The mean (± standard deviation) needle score was 6.3 (± 0.8) in the video–sucrose–lidocaine group compared with 6.7 (± 0.8) in each of the other groups. There were no other between-group differences. Recovery scores did not differ among groups (p = 0.98), but did differ across ages (p < 0
[Palliative care: an example of Comparative Effectiveness Research?].

PubMed

Schmacke, Norbert

2012-01-01

Comparative Effectiveness Research (CER) seeks to establish treatment objectives and concepts striving to achieve patient relevant progress in therapy on the basis of published evidence. Using the example of palliative medicine and palliative care, respectively, it will be demonstrated that these two are under-researched areas of care. In addition, it will become clear that the success of this interdisciplinary treatment concept for the seriously ill must be weighed in the light of traditional clinical research - far beyond the cancer diagnosis. The current distinction between curative and palliative research and care urgently needs to be reconsidered. Copyright © 2012. Published by Elsevier GmbH.
Testcross additive and dominance effects in best linear unbiased prediction of maize single-cross performance.

PubMed

Bernardo, R

1996-11-01

Best linear unbiased prediction (BLUP) has been found to be useful in maize (Zea mays L.) breeding. The advantage of including both testcross additive and dominance effects (Intralocus Model) in BLUP, rather than only testcross additive effects (Additive Model), has not been clearly demonstrated. The objective of this study was to compare the usefulness of Intralocus and Additive Models for BLUP of maize single-cross performance. Multilocation data from 1990 to 1995 were obtained from the hybrid testing program of Limagrain Genetics. Grain yield, moisture, stalk lodging, and root lodging of untested single crosses were predicted from (1) the performance of tested single crosses and (2) known genetic relationships among the parental inbreds. Correlations between predicted and observed performance were obtained with a delete-one cross-validation procedure. For the Intralocus Model, the correlations ranged from 0.50 to 0.66 for yield, 0.88 to 0.94 for moisture, 0.47 to 0.69 for stalk lodging, and 0.31 to 0.45 for root lodging. The BLUP procedure was consistently more effective with the Intralocus Model than with the Additive Model. When the Additive Model was used instead of the Intralocus Model, the reductions in the correlation were largest for root lodging (0.06-0.35), smallest for moisture (0.00-0.02), and intermediate for yield (0.02-0.06) and stalk lodging (0.02-0.08). The ratio of dominance variance (v D) to total genetic variance (v G) was highest for root lodging (0.47) and lowest for moisture (0.10). The Additive Model may be used if prior information indicates that VD for a given trait has little contribution to VG. Otherwise, the continued use of the Intralocus Model for BLUP of single-cross performance is recommended.
Effects of DMSO and glycerol additives on the property of polyamide reverse osmosis membrane.

PubMed

Wu, Fengjing; Liu, Xiaojuan; Au, Chaktong

2016-10-01

The polyamide reverse osmosis (RO) membranes were prepared through interfacial polymerization of m-phenylenediamine (MPD) and trimesoyl chloride (TMC). The use of dimethyl sulfoxide (DMSO) and glycerol as additives for the formation of thin-film composite (TFC) was investigated. We studied the effect of DMSO and glycerol addition on membrane property and RO performance. Microscopic morphology was examined by atomic force microscopy and scanning electron microscopy. The surface hydrophilicity was characterized on the basis of water contact angle and surface solid-liquid interfacial free energy (-ΔG SL ). Water flux and salt rejection ability of the membranes prepared with or without the additives were evaluated by cross-flow RO tests. The results reveal that the addition of DMSO and glycerol strongly influences the property of the TFC RO membrane. Compared to the MPD/TMC membrane fabricated without DMSO and glycerol, the MPD/TMC/DMSO/glycerol membrane has a rougher surface and is more hydrophilic, showing smaller water contact angle and larger -ΔG SL value. Without decrease in salt rejection ability, the MPD/TMC/DMSO/glycerol membrane shows water flux significantly larger than that of the MPD/TMC membrane. The unique property of the MPD/TMC/DMSO/glycerol membrane is attributed to the cooperative effect of DMSO and glycerol on membrane structure during the interfacial polymerization process.
Experimental investigations of the hydrogen addition effects on diesel engine performance

NASA Astrophysics Data System (ADS)

Mirica, I.; Pana, C.; Negurescu, N.; Cernat, A.; Nutu, C.

2016-08-01

In the global content regarding the impact on the environmental of the gases emissions resulted from the fossil fuels combustion, an interest aspect discussed on the 21st Session of the Conference of the Parties from the 2015 Paris Climate Conference and the gradual diminution of the worldwide oil reserves contribute to the necessity of searching of alternative energy from durable and renewable resources. At the use of hydrogen as addition in air to diesel engine, the level of CO, HC and smoke from the exhaust gases will decrease due to the improvement of the combustion process. At low and medium partial loads and low hydrogen energetic ratios used the NOX emission level can decrease comparative to classic diesel engine. The hydrogen use as fuel for diesel engine leads to the improving of the energetic and emissions performance of the engine due to combustion improvement and reduction of carbon content. The paper presents, in a comparative way, results of the experimental researches carried on a truck compression ignition engine fuelled with diesel fuel and with hydrogen diesel fuel and hydrogen as addition in air at different engine operation regimes. The results obtained during experimental investigations show better energetic and pollution performance of the engine fuelled with hydrogen as addition in air comparative to classic engine. The influences of hydrogen addition on engine operation are shown.
Effect of different oxytetracycline addition methods on its degradation behavior in soil.

PubMed

Chen, Gui-Xiu; He, Wei-Wei; Wang, Yan; Zou, Yong-De; Liang, Juan-Boo; Liao, Xin-Di; Wu, Yin-Bao

2014-05-01

The degradation behavior of veterinary antibiotics in soil is commonly studied using the following methods of adding antibiotics to the soil: (i) adding manure collected from animals fed with a diet containing antibiotics, (ii) adding antibiotic-free animal manure spiked with antibiotics and (iii) directly adding antibiotics. No research simultaneously comparing different antibiotic addition methods was found. Oxytetracycline (OTC) was used as a model antibiotic to compare the effect of the three commonly used antibiotic addition methods on OTC degradation behavior in soil. The three treatment methods have similar trends, though OTC degradation half-lives show the following significant differences (P<0.05): manure from swine fed OTC (treatment A)compared to the treatment without manure (C), thus increasing degradation of OTC in the soil. Because the main entry route for veterinary antibiotics into soil is via the manure of animals given with antibiotics, the most appropriate method to study the degradation and ecotoxicity of antibiotic residues in soil may be to use manure from animals that are given a particular antibiotic, rather than by adding it directly to the soil. Copyright © 2014 Elsevier B.V. All rights reserved.
Mapping quantitative trait loci with additive effects and additive x additive epistatic interactions for biomass yield, grain yield, and straw yield using a doubled haploid population of wheat (Triticum aestivum L.).

PubMed

Li, Z K; Jiang, X L; Peng, T; Shi, C L; Han, S X; Tian, B; Zhu, Z L; Tian, J C

2014-02-28

Biomass yield is one of the most important traits for wheat (Triticum aestivum L.)-breeding programs. Increasing the yield of the aerial parts of wheat varieties will be an integral component of future wheat improvement; however, little is known regarding the genetic control of aerial part yield. A doubled haploid population, comprising 168 lines derived from a cross between two winter wheat cultivars, 'Huapei 3' (HP3) and 'Yumai 57' (YM57), was investigated. Quantitative trait loci (QTL) for total biomass yield, grain yield, and straw yield were determined for additive effects and additive x additive epistatic interactions using the QTLNetwork 2.0 software based on the mixed-linear model. Thirteen QTL were determined to have significant additive effects for the three yield traits, of which six also exhibited epistatic effects. Eleven significant additive x additive interactions were detected, of which seven occurred between QTL showing epistatic effects only, two occurred between QTL showing epistatic effects and additive effects, and two occurred between QTL with additive effects. These QTL explained 1.20 to 10.87% of the total phenotypic variation. The QTL with an allele originating from YM57 on chromosome 4B and another QTL contributed by HP3 alleles on chromosome 4D were simultaneously detected on the same or adjacent chromosome intervals for the three traits in two environments. Most of the repeatedly detected QTL across environments were not significant (P > 0.05). These results have implications for selection strategies in wheat biomass yield and for increasing the yield of the aerial part of wheat.
Effect of commercial mineral-based additives on composting and compost quality.

PubMed

Himanen, M; Hänninen, K

2009-08-01

The effectiveness of two commercial additives meant to improve the composting process was studied in a laboratory-scale experiment. Improver A (sulphates and oxides of iron, magnesium, manganese, and zinc mixed with clay) and B (mixture of calcium hydroxide, peroxide, and oxide) were added to source-separated biowaste:peat mixture (1:1, v/v) in proportions recommended by the producers. The composting process (T, emissions of CO(2), NH(3), and CH(4)) and the quality of the compost (pH, conductivity, C/N ratio, water-soluble NH(4)-N and NO(3)-N, water- and NaOH-soluble low-weight carboxylic acids, nutrients, heavy metals and phytotoxicity to Lepidium sarivum) were monitored during one year. Compared with the control, the addition of improver B increased pH by two units, led to an earlier elimination of water-soluble ammonia, an increase in nitrates, a 10-fold increase in concentrations of acetic acid, and shortened phytotoxicity period by half; as negative aspect it led to volatilization of ammonia. The addition of improver A led to a longer thermophilic stage by one week and lower concentrations of low-weight carboxylic acids (both water- and NaOH-extractable) with formic and acetic of similar amounts, however, most of the aspects claimed by the improver's producer were not confirmed in this trial.
Comparative effectiveness regulations and pharmaceutical innovation.

PubMed

Vernon, John A; Golec, Joseph H; Stevens, J Stedman

2010-01-01

As healthcare reform evolves and takes shape, comparative effectiveness research (CER) appears to be one of the central topics on the national healthcare agenda. Over the past couple of years, comparative effectiveness has been explicitly incorporated in more than ten bills. For example, the passage of the American Recovery and Reinvestment Act of 2009 authorized $US1.1 billion for CER. Comparative effectiveness, when costs are formally considered, offers the hope of efficient resource allocation within US healthcare markets. However, the future operationalization and implementation of comparative effectiveness is uncertain, and there exist potentially negative, and unintended, consequences under certain scenarios. One example, and the focus of this article, is pharmaceutical innovation. Incentives for pharmaceutical R&D could be affected if drug development costs increase as a result of firms having to bear, directly or indirectly, the costs of running larger, randomized, head-to-head comparative effectiveness trials. While this may or may not be the case with current and future comparative effectiveness legislation and its subsequent implementation, the potential consequences for pharmaceutical innovation warrant recognition. This is the purpose of the article. To achieve this goal, we develop several models of clinical trial design, drug development costs and R&D investment. By example, we shed light on the causal links between the models and the ways in which industry R&D investment can be affected.
Laser Beam Melting of Alumina: Effect of Absorber Additions

NASA Astrophysics Data System (ADS)

Moniz, Liliana; Colin, Christophe; Bartout, Jean-Dominique; Terki, Karim; Berger, Marie-Hélène

2018-03-01

Ceramic laser beam melting offers new manufacturing possibilities for complex refractory structures. Poor absorptivity in near infra-red wavelengths of oxide ceramics is overcome with absorber addition to ceramic powders. Absorbers affect powder bed densities and geometrical stability of melted tracks. Optimum absorber content is defined for Al2O3 by minimizing powder bed porosity, maximizing melting pool geometrical stability and limiting shrinkage. Widest stability fields are obtained with addition of 0.1 wt.% C and 0.5 wt.% β-SiC. Absorption coefficient values of Beer-Lambert law follow stability trends: they increase with C additions, whereas with β-SiC, a maximum is reached for 0.5 wt.%. Powder particle ejections are also identified. Compared to metallic materials, this ejection phenomenon can no longer be neglected when establishing a three-dimensional manufacturing strategy.

Effects of Bi Addition on the Microstructure and Mechanical Properties of Nanocrystalline Ag Coatings.

PubMed

Wang, Yuxin; Cheng, Guang; Tay, See Leng; Guo, Yunxia; Sun, Xin; Gao, Wei

2017-08-10

In this study we investigated the effects of Bi addition on the microstructure and mechanical properties of an electrodeposited nanocrystalline Ag coating. Microstructural features were investigated with transmission electron microscopy (TEM). The results indicate that the addition of Bi introduced nanometer-scale Ag-Bi solid solution particles and more internal defects to the initial Ag microstructures. The anisotropic elastic-plastic properties of the Ag nanocrystalline coating with and without Bi addition were examined with nanoindentation experiments in conjunction with the recently-developed inverse method. The results indicate that the as-deposited nanocrystalline Ag coating contained high mechanical anisotropy. With the addition of 1 atomic percent (at%) Bi, the anisotropy within Ag-Bi coating was very small, and yield strength of the nanocrystalline Ag-Bi alloy in both longitudinal and transverse directions were improved by over 100% compared to that of Ag. On the other hand, the strain-hardening exponent of Ag-Bi was reduced to 0.055 from the original 0.16 of the Ag coating. Furthermore, the addition of Bi only slightly increased the electrical resistivity of the Ag-Bi coating in comparison to Ag. Results of our study indicate that Bi addition is a promising method for improving the mechanical and physical performances of Ag coating for electrical contacts.
Using Meta-analyses for Comparative Effectiveness Research

PubMed Central

Ruppar, Todd M.; Phillips, Lorraine J.; Chase, Jo-Ana D.

2012-01-01

Comparative effectiveness research seeks to identify the most effective interventions for particular patient populations. Meta-analysis is an especially valuable form of comparative effectiveness research because it emphasizes the magnitude of intervention effects rather than relying on tests of statistical significance among primary studies. Overall effects can be calculated for diverse clinical and patient-centered variables to determine the outcome patterns. Moderator analyses compare intervention characteristics among primary studies by determining if effect sizes vary among studies with different intervention characteristics. Intervention effectiveness can be linked to patient characteristics to provide evidence for patient-centered care. Moderator analyses often answer questions never posed by primary studies because neither multiple intervention characteristics nor populations are compared in single primary studies. Thus meta-analyses provide unique contributions to knowledge. Although meta-analysis is a powerful comparative effectiveness strategy, methodological challenges and limitations in primary research must be acknowledged to interpret findings. PMID:22789450
Effect of Poly(Vinyl Alcohol) Addition on the Properties of Hydrothermal Derived Calcium Phosphate Cement for Bone Filling Materials

NASA Astrophysics Data System (ADS)

Razali, N. N.; Sopyan, I.; Mel, M.; Salleh, H. M.; Rahman, M. M.; Singh, R.

2017-06-01

The effect of addition of poly(vinyl alcohol) on hydrothermal derived calcium phosphate cement has been studied. The precursors used to prepare the cement were calcium oxide (CaO) and ammonium dihydrogen phosphate (NH4H2PO4); the reaction was conducted in water at 80-100°C. To improve properties of CPC, poly(vinyl alcohol) (PVA) of 1wt% and 2wt% was added to the liquid phase of CPC and the results were compared to CPC without PVA addition. The addition of PVA was proved to bring remarkable effects on cohesion, setting time and mechanical strength of CPC which make it suitable physically for injectable bone filler applications.
Additive effect of red blood cell rigidity and adherence to endothelial cells in inducing vascular resistance.

PubMed

Kaul, D K; Koshkaryev, A; Artmann, G; Barshtein, G; Yedgar, S

2008-10-01

To explore the contribution of red blood cell (RBC) deformability and interaction with endothelial cells (ECs) to circulatory disorders, these RBC properties were modified by treatment with hydrogen peroxide (H(2)O(2)), and their effects on vascular resistance were monitored following their infusion into rat mesocecum vasculature. Treatment with 0.5 mM H(2)O(2) increased RBC/EC adherence without significant alteration of RBC deformability. At 5.0 mM H(2)O(2), RBC deformability was considerably reduced, inducing a threefold increase in the number of undeformable cells, whereas RBC/EC adherence was not further affected by the increased H(2)O(2) concentration. This enabled the selective manipulation of RBC adherence and deformability and the testing of their differential effect on vascular resistance. Perfusion of RBCs with enhanced adherence and unchanged deformability (treatment with 0.5 mM H(2)O(2)) increased vascular resistance by about 35% compared with untreated control RBCs. Perfusion of 5.0 mM H(2)O(2)-treated RBCs, with reduced deformability (without additional increase of adherence), further increased vascular resistance by about 60% compared with untreated control RBCs. These results demonstrate the specific effects of elevated adherence and reduced deformability of oxidized RBCs on vascular resistance. These effects can be additive, depending on the oxidation conditions. The oxidation-induced changes applied in this study are moderate compared with those observed in RBCs in pathological states. Yet, they caused a considerable increase in vascular resistance, thus demonstrating the potency of RBC/EC adherence and RBC deformability in determining resistance to blood flow in vivo.
Additive postprandial blood glucose-attenuating and satiety-enhancing effect of cinnamon and acetic acid.

PubMed

Mettler, Samuel; Schwarz, Isaline; Colombani, Paolo C

2009-10-01

Cinnamon and vinegar or acetic acid were reported to reduce the postprandial blood glucose response. We hypothesized that the combination of these substances might result in an additive effect. Therefore, we determined the 2-hour postprandial blood glucose and satiety response to a milk rice meal supplemented with either cinnamon or acetic acid on their own or in combination. Subjects (n = 27) consumed the meal on 4 occasions as either pure (control trial), with 4 g cinnamon, 28 mmol acetic acid, or the combination of cinnamon + acetic acid. Blood glucose and satiety were assessed before eating and 15, 30, 45, 60, 90, and 120 minutes postprandially. At 15 minutes, the combination of cinnamon + acetic acid resulted in a significantly reduced blood glucose concentration compared with the control meal (P = .021). The incremental area under the blood glucose response curve over 120 minutes did, however, not differ between the trials (P = .539). The satiety score of the cinnamon + acetic acid trial was significantly higher than that in the control trial at 15 (P = .024) and 30 minutes (P = .024), but the incremental area under the curve of the satiety response did not differ (P = .116) between the trials. In conclusion, the significant effect of the combination of cinnamon and acetic acid on blood glucose and satiety immediately after meal intake indicated an additive effect of the 2 substances. Whether larger doses of cinnamon and acetic acid may result in a more substantial additive effect on blood glucose or satiety remains to be investigated.
Dissecting the effect of chemical additives on the enzymatic hydrolysis of pretreated wheat straw.

PubMed

Monschein, Mareike; Reisinger, Christoph; Nidetzky, Bernd

2014-10-01

Chemical additives were examined for ability to increase the enzymatic hydrolysis of thermo-acidically pretreated wheat straw by Trichoderma reesei cellulase at 50 °C. Semi-empirical descriptors derived from the hydrolysis time courses were applied to compare influence of these additives on lignocellulose bioconversion on a kinetic level, presenting a novel view on their mechanism of action. Focus was on rate retardation during hydrolysis, substrate conversion and enzyme adsorption. PEG 8000 enabled a reduction of enzyme loading by 50% while retaining the same conversion of 67% after 24h. For the first time, a beneficial effect of urea is reported, increasing the final substrate conversion after 48 h by 16%. The cationic surfactant cetyl-trimethylammonium bromide (CTAB) enhanced the hydrolysis rate at extended reaction time (rlim) by 34% and reduced reaction time by 28%. A combination of PEG 8000 and urea increased sugar release more than additives used individually. Copyright © 2014 Elsevier Ltd. All rights reserved.
Effect of halogen-terminated additives on the performance and the nanostructure of all-polymer solar cells

NASA Astrophysics Data System (ADS)

Park, Soohyeong; Nam, Sungho; Seo, Jooyeok; Jeong, Jaehoon; Lee, Sooyong; Kim, Hwajeong; Kim, Youngkyoo

2015-02-01

Here, we report the influence of halogen-terminated additives on the performance and the nanostructure of all-polymer solar cells that are made with bulk heterojunction (BHJ) films of poly(3-hexylthiophene) (P3HT) (as an electron donor) and poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) (as an electron acceptor). Diiodooctane (DIO) and dibromooctane (DBO) were employed as additives in order to compare the effect of different halogen groups (bromine and iodine). Results showed that the power conversion efficiency of devices was slightly (˜15%) improved by using additives due to the increased open-circuit voltage and fill factor. The synchrotron radiation grazing-incidence X-ray diffraction (GIXD) measurements disclosed that the performance improvement was closely related to the relatively well-evolved nanostructures in the P3HT:F8BT films caused by the additives.
Effect of additives on adsorption and desorption behavior of xylanase on acid-insoluble lignin from corn stover and wheat straw.

PubMed

Li, Yanfei; Ge, Xiaoyan; Sun, Zongping; Zhang, Junhua

2015-06-01

The competitive adsorption between cellulases and additives on lignin in the hydrolysis of lignocelluloses has been confirmed, whereas the effect of additives on the interaction between xylanase and lignin is not clear. In this work, the effects of additives, poly(ethylene glycol) 2000, poly(ethylene glycol) 6000, Tween 20, and Tween 80, on the xylanase adsorption/desorption onto/from acid-insoluble lignin from corn stover (CS-lignin) and wheat straw (WS-lignin) were investigated. The results indicated that the additives could adsorb onto isolated lignin and reduce the xylanase adsorption onto lignin. Compared to CS-lignin, more additives could adsorb onto WS-lignin, making less xylanase adsorbed onto WS-lignin. In addition, the additives could enhance desorption of xylanase from lignin, which might be due to the competitive adsorption between xylanase and additives on lignin. The released xylanase from lignin still exhibited hydrolytic capacity in the hydrolysis of isolated xylan and xylan in corn stover. Copyright © 2015 Elsevier Ltd. All rights reserved.
Joint effects of heterogeneous estrogenic chemicals in the E-screen--exploring the applicability of concentration addition.

PubMed

Silva, Elisabete; Rajapakse, Nissanka; Scholze, Martin; Backhaus, Thomas; Ermler, Sibylle; Kortenkamp, Andreas

2011-08-01

In the last few years, significant advances have been made toward understanding the joint action of endocrine disrupting chemicals (EDCs). A number of studies have demonstrated that the combined effects of different types of EDCs (e.g., estrogenic, antiandrogenic, or thyroid-disrupting agents) can be predicted by the model of concentration addition (CA). However, there is still limited information on the effects of mixtures of large numbers of chemicals with varied structural features, which are more representative of realistic human exposure scenarios. The work presented here aims at filling this gap. Using a breast cancer cell proliferation assay (E-Screen), we assessed the joint effects of five mixtures, containing between 3 and 16 estrogenic agents, including compounds as diverse as steroidal hormones (endogenous and synthetic), pesticides, cosmetic additives, and phytoestrogens. CA was employed to predict mixture effects, which were then compared with experimental outcomes. The effects of two of the mixtures tested were additive, being accurately predicted by CA. However, for the three other mixtures, CA slightly overestimated the experimental observations. In view of these results, we hypothesized that the deviations were due to increased metabolism of steroidal estrogens in the mixture setting. We investigated this by testing the impact of two such mixtures on the activation and expression of steroidal estrogen metabolizing enzymes, such as cytochrome P450 (CYP) 1A1, CYP 1B1, and CYP 3A4. Activation of CYP 1B1 and, consequently, a reduction in the levels of steroidal estrogens in the mixture could contribute to the shortfall from the additivity prediction that we observed.
Comparing the effect of clofibrate and phenobarbital on the newborns with hyperbilirubinemia

PubMed Central

Hamidi, Majid; Zamanzad, Behnam; Mesripour, Azadeh

2013-01-01

The aim of treating hyperbilirubinemia is preventing the serum bilirubin to reach neurotoxic levels, which is done by phototherapy or blood transfusion. However, pharmacological treatments still remain vague. Therefore the effects of adding either clofibrate or phenobarbital on treatment outcomes was evaluated in icteric non-hemolitic newborns. Ninety neonates were divided in three groups. Two groups were prescribed 100 mg/kg clofibrate or 5 mg/kg phenobarbital orally as single dose on arrival, in addition to phototherapy. The control group only received phototherapy. Serum bilirubin was evaluated at the reception and 12, 24, 48 and 72 hours after beginning of drug therapy. Total bilirubin levels decreased in treated groups compared with the control group in all samples taken (12, 24, 48 and 72 hours). Clofibrate effect in decreasing bilirubin level was more prominent (14 % and 32 % after 12 and 72 h respectively). In addition duration of hospitalization and length of phototherapy decreased in clofibrate and phenobarbital groups compared with control group (1.5, 2 days respectively, vs. 2.6 days). Therefore using clofibrate and phenobarbital in icteric neonates are supportive not only by decreasing the serum bilirubin level, but also by lessening the duration of hospitalization and phototherapy. Thus in addition to cost benefits for the patient these drugs can reduce the risks of transfusion, and clofibrate seems more promising in this regard. PMID:26417217
Modulation of additive and interactive effects in lexical decision by trial history.

PubMed

Masson, Michael E J; Kliegl, Reinhold

2013-05-01

Additive and interactive effects of word frequency, stimulus quality, and semantic priming have been used to test theoretical claims about the cognitive architecture of word-reading processes. Additive effects among these factors have been taken as evidence for discrete-stage models of word reading. We present evidence from linear mixed-model analyses applied to 2 lexical decision experiments indicating that apparent additive effects can be the product of aggregating over- and underadditive interaction effects that are modulated by recent trial history, particularly the lexical status and stimulus quality of the previous trial's target. Even a simple practice effect expressed as improved response speed across trials was powerfully modulated by the nature of the previous target item. These results suggest that additivity and interaction between factors may reflect trial-to-trial variation in stimulus representations and decision processes rather than fundamental differences in processing architecture.
HETEROGENEITY IN TREATMENT EFFECT AND COMPARATIVE EFFECTIVENESS RESEARCH.

PubMed

Luo, Zhehui

2011-10-01

The ultimate goal of comparative effectiveness research (CER) is to develop and disseminate evidence-based information about which interventions are most effective for which patients under what circumstances. To achieve this goal it is crucial that researchers in methodology development find appropriate methods for detecting the presence and sources of heterogeneity in treatment effect (HTE). Comparing with the typically reported average treatment effect (ATE) in randomized controlled trials and non-experimental (i.e., observational) studies, identifying and reporting HTE better reflect the nature and purposes of CER. Methodologies of CER include meta-analysis, systematic review, design of experiments that encompasses HTE, and statistical correction of various types of estimation bias, which is the focus of this review.
Effect of Exogenous Phytase Addition on Soil Phosphatase Activities: a Fluorescence Spectroscopy Study.

PubMed

Yang, Xiao-zhu; Chen, Zhen-hua; Zhang, Yu-lan; Chen, Li-jun

2015-05-01

The utilization of organic phosphorus (P) has directly or indirectly improved after exogenous phytase was added to soil. However, the mechanism by which exogenous phytase affected the soil phosphatases (phosphomonoesterase and phosphodiesterase) activities was not clear. The present work was aimed to study red soil, brown soil and cinnamon soil phosphomonoesterase (acid and alkaline) (AcP and AlP) and phosphodiesterase (PD) activities responding to the addition of exogenous phytase (1 g phytase/50 g air dry soil sample) based on the measurements performed via a fluorescence detection method combined with 96 microplates using a TECAN Infinite 200 Multi-Mode Microplate Reader. The results indicated that the acid phosphomonoesterase activity was significantly enhanced in red soil (p≤0. 01), while it was significantly reduced in cinnamon soil; alkaline phosphomonoesterase activity was significantly enhanced in cinnamon soil (p≤ 0. 01), while it was significantly reduced in red soil; phosphodiesterase activity was increased in three soils but it was significantly increased in brown soil (p≤0. 01) after the addition of exogenous phytase. The activities still remained strong after eight days in different soils, which indicated that exogenous phytase addition could be enhance soil phosphatases activities effectively. This effect was not only related to soil properties, such as pH and phosphorus forms, but might also be related to the excreted enzyme amount of the stimulating microorganism. Using fluorescence spectroscopy to study exogenous phytase addition influence on soil phosphatase activities was the first time at home and abroad. Compared with the conventional spectrophotometric method, the fluorescence microplate method is an accurate, fast and simple to use method to determine the relationships among the soil phosphatases activities.
Separating the effects of shelter from additional cage enhancements for group-housed BALB/cJ mice.

PubMed

Swetter, Brentt J; Karpiak, Christie P; Cannon, J Timothy

2011-05-20

Enrichment studies with rodents have demonstrated that cage enhancements can improve animal welfare and performance on common behavioral measures, but few studies have compared more than one type of enrichment or controlled for confounds, and some have revealed undesirable effects including increased aggression. We compared effects on male (n=51) and female (n=52) BALB/cJ mice of three common additions to a standard home cage: shelter, shelter+running wheel, and shelter+novel objects. Mice in all conditions lived in standard sized cages with 3-4 mice per cage. Males evidenced significant condition effects. Shelter increased longevity and maintained low levels of aggression. Adding a running wheel increased aggression over shelter alone, changed behavior in the elevated plus (EP) and open field (OF), and maintained the improved longevity seen in all shelter conditions. Novel objects impacted behavioral measures compared to the standard condition. An Igloo shelter without running wheel creates a very different home cage environment than the same shelter with the running wheel attached. Shelter, with positive impact on animal welfare, minimal effects on some common behavioral measures, and some positive effects on test variance, warrants consideration for routine inclusion with group-housed BALB/cJ males. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.
An observational study of patient satisfaction with fesoterodine in the treatment of overactive bladder: effects of additional educational material.

PubMed

Schneider, T; Arumi, D; Crook, T J; Sun, F; Michel, M C

2014-09-01

To compare the effects of additional educational material on treatment satisfaction of overactive bladder (OAB) patients treated with a muscarinic receptor antagonist. In an observational study of OAB patients being treated by their physician with fesoterodine for 4 months (FAKTEN study), sites were randomised to providing standard treatment or additional educational material including the SAGA tool. Patient satisfaction was assessed by three validated patient-reported outcomes including the Treatment Satisfaction Question. Because of premature discontinuation of the study, descriptive statistical analysis was performed. A total of 431 and 342 patients received standard treatment or additional educational material, respectively. At study end, 76.1% [95% CI = 71.3, 80.4] of patients with standard care and 79.6% [95% CI = 74.4, 84.1] with additional SAGA tool were satisfied with treatment (primary end-point). Comparable outcomes with and without the additional educational material were also found in various patient subgroups, at the 1-month time point, and for the other patient-reported outcomes. A notable exception was the subgroup of treatment-naïve patients in which the percentage of satisfied patients was 77.2% vs. 89.5% with standard treatment and additional SAGA tool, respectively (post hoc analysis). In an observational study, most overactive bladder patients were satisfied with fesoterodine treatment. Because of the small sample size, the study does not support or refute the hypothesis that adding the SAGA tool will improve patient satisfaction with treatment. The potential effect of additional educational material in treatment-naïve patients warrants further dedicated studies. © 2014 John Wiley & Sons Ltd.
Effects of Bi Addition on the Microstructure and Mechanical Properties of Nanocrystalline Ag Coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yuxin; Cheng, Guang; Tay, See Leng

Here in this study we investigated the effects of Bi addition on the microstructure and mechanical properties of an electrodeposited nanocrystalline Ag coating. Microstructural features were investigated with transmission electron microscopy (TEM). The results indicate that the addition of Bi introduced nanometer-scale Ag-Bi solid solution particles and more internal defects to the initial Ag microstructures. The anisotropic elastic-plastic properties of the Ag nanocrystalline coating with and without Bi addition were examined with nanoindentation experiments in conjunction with the recently-developed inverse method. The results indicate that the as-deposited nanocrystalline Ag coating contained high mechanical anisotropy. With the addition of 1 atomicmore » percent (at%) Bi, the anisotropy within Ag-Bi coating was very small, and yield strength of the nanocrystalline Ag-Bi alloy in both longitudinal and transverse directions were improved by over 100% compared to that of Ag. On the other hand, the strain-hardening exponent of Ag-Bi was reduced to 0.055 from the original 0.16 of the Ag coating. Furthermore, the addition of Bi only slightly increased the electrical resistivity of the Ag-Bi coating in comparison to Ag. Lastly, results of our study indicate that Bi addition is a promising method for improving the mechanical and physical performances of Ag coating for electrical contacts.« less
Effects of Bi Addition on the Microstructure and Mechanical Properties of Nanocrystalline Ag Coatings

DOE PAGES

Wang, Yuxin; Cheng, Guang; Tay, See Leng; ...

2017-08-10

Here in this study we investigated the effects of Bi addition on the microstructure and mechanical properties of an electrodeposited nanocrystalline Ag coating. Microstructural features were investigated with transmission electron microscopy (TEM). The results indicate that the addition of Bi introduced nanometer-scale Ag-Bi solid solution particles and more internal defects to the initial Ag microstructures. The anisotropic elastic-plastic properties of the Ag nanocrystalline coating with and without Bi addition were examined with nanoindentation experiments in conjunction with the recently-developed inverse method. The results indicate that the as-deposited nanocrystalline Ag coating contained high mechanical anisotropy. With the addition of 1 atomicmore » percent (at%) Bi, the anisotropy within Ag-Bi coating was very small, and yield strength of the nanocrystalline Ag-Bi alloy in both longitudinal and transverse directions were improved by over 100% compared to that of Ag. On the other hand, the strain-hardening exponent of Ag-Bi was reduced to 0.055 from the original 0.16 of the Ag coating. Furthermore, the addition of Bi only slightly increased the electrical resistivity of the Ag-Bi coating in comparison to Ag. Lastly, results of our study indicate that Bi addition is a promising method for improving the mechanical and physical performances of Ag coating for electrical contacts.« less
Effect of Fruit Pomace Addition on Shortbread Cookies to Improve Their Physical and Nutritional Values.

PubMed

Tańska, Małgorzata; Roszkowska, Beata; Czaplicki, Sylwester; Borowska, Eulalia Julitta; Bojarska, Justyna; Dąbrowska, Aneta

2016-09-01

Fruit pomace remaining after juice extraction is still a source of bioactive compounds. Especially rich in these compounds is the pomace from blackcurrant fruit and from fruits of little-known horticultural plants, like: rowan, rosehip and elderberry. The addition of fruit pomace to bakery and confectionery products, especially to those made of white flour, may significantly enrich their composition with dietary fiber, vitamins and phenolic compounds. This study was aimed at determining the effect of 20 % addition of fruit pomace from rosehip, rowan, blackcurrant and elderberry on the properties of shortbread cookies. The pomace-containing cookies, compared to those without additives, were characterized by a darker color with a higher contribution of yellowness, and by higher hardness. The overall organoleptic assessment was comparable for all types of cookies, however the cookies with pomace were characterized by more perceptible taste and aroma, and were sourer. The extracts from pomace-supplemented cookies had a significantly stronger antioxidant capacity than that from the cookies without pomace, but they were ineffective in inhibiting lipid oxidation. The study showed that fruit pomace could improve the nutritional value of shortbread cookies. Furthermore, non-typical color of such a new product may be attractive to consumers.
Effects of trace element addition on process stability during anaerobic co-digestion of OFMSW and slaughterhouse waste.

PubMed

Moestedt, J; Nordell, E; Shakeri Yekta, S; Lundgren, J; Martí, M; Sundberg, C; Ejlertsson, J; Svensson, B H; Björn, A

2016-01-01

This study used semi-continuous laboratory scale biogas reactors to simulate the effects of trace-element addition in different combinations, while degrading the organic fraction of municipal solid waste and slaughterhouse waste. The results show that the combined addition of Fe, Co and Ni was superior to the addition of only Fe, Fe and Co or Fe and Ni. However, the addition of only Fe resulted in a more stable process than the combined addition of Fe and Co, perhaps indicating a too efficient acidogenesis and/or homoacetogenesis in relation to a Ni-deprived methanogenic population. The results were observed in terms of higher biogas production (+9%), biogas production rates (+35%) and reduced VFA concentration for combined addition compared to only Fe and Ni. The higher stability was supported by observations of differences in viscosity, intraday VFA- and biogas kinetics as well as by the 16S rRNA gene and 16S rRNA of the methanogens. Copyright © 2015 Elsevier Ltd. All rights reserved.
Compensation and additivity of anthropogenic mortality: life-history effects and review of methods.

PubMed

Péron, Guillaume

2013-03-01

Demographic compensation, the increase in average individual performance following a perturbation that reduces population size, and, its opposite, demographic overadditivity (or superadditivity) are central processes in both population ecology and wildlife management. A continuum of population responses to changes in cause-specific mortality exists, of which additivity and complete compensation constitute particular points. The position of a population on that continuum influences its ability to sustain exploitation and predation. Here I describe a method for quantifying where a population is on the continuum. Based on variance-covariance formulae, I describe a simple metric for the rate of compensation-additivity. I synthesize the results from 10 wildlife capture-recapture monitoring programmes from the literature and online databases, reviewing current statistical methods and the treatment of common sources of bias. These results are used to test hypotheses regarding the effects of life-history strategy, population density, average cause-specific mortality and age class on the rate of compensation-additivity. This comparative analysis highlights that long-lived species compensate less than short-lived species and that populations below their carrying capacity compensate less than those above. © 2012 The Authors. Journal of Animal Ecology © 2012 British Ecological Society.

Phenylethynyl Containing Reactive Additives

NASA Technical Reports Server (NTRS)

Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

2002-01-01

Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.
Phenylethynyl Containing Reactive Additives

NASA Technical Reports Server (NTRS)

Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

2002-01-01

Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.
Effect of 2D WS2 Addition on Cold-Sprayed Aluminum Coating

NASA Astrophysics Data System (ADS)

Loganathan, Archana; Rengifo, Sara; Hernandez, Alexander Franco; Emirov, Yusuf; Zhang, Cheng; Boesl, Benjamin; Karthikeyan, Jeganathan; Agarwal, Arvind

2017-10-01

Tungsten disulfide (WS2) has excellent solid lubrication properties due to its 2D layered structure. This study focuses on depositing Al-2 wt.% WS2 composite coating by cold spray technique. The effect of WS2 addition on the microstructure, mechanical and tribological properties of the composite coatings is examined in the as-deposited and heat-treated conditions. After heat treatment, the coating density increased to 99% with improved intersplat bonding. The microhardness of the heat-treated Al-2 wt.% WS2 coating increased by 56% as compared to the as-sprayed coating. The wear resistance of heat-treated Al-2 wt.% WS2 coating improved by 75% with a synergistic reduction in the coefficient of friction (COF) by 51%. Transmission electron microscopy investigation reveals the presence of layered WS2 within aluminum splats with a strong interface. This study shows that cold spraying can be effectively used to integrate 2D layered WS2 as a solid lubricant in the metallic coatings.
Living network meta-analysis compared with pairwise meta-analysis in comparative effectiveness research: empirical study.

PubMed

Nikolakopoulou, Adriani; Mavridis, Dimitris; Furukawa, Toshi A; Cipriani, Andrea; Tricco, Andrea C; Straus, Sharon E; Siontis, George C M; Egger, Matthias; Salanti, Georgia

2018-02-28

To examine whether the continuous updating of networks of prospectively planned randomised controlled trials (RCTs) ("living" network meta-analysis) provides strong evidence against the null hypothesis in comparative effectiveness of medical interventions earlier than the updating of conventional, pairwise meta-analysis. Empirical study of the accumulating evidence about the comparative effectiveness of clinical interventions. Database of network meta-analyses of RCTs identified through searches of Medline, Embase, and the Cochrane Database of Systematic Reviews until 14 April 2015. Network meta-analyses published after January 2012 that compared at least five treatments and included at least 20 RCTs. Clinical experts were asked to identify in each network the treatment comparison of greatest clinical interest. Comparisons were excluded for which direct and indirect evidence disagreed, based on side, or node, splitting test (P<0.10). Cumulative pairwise and network meta-analyses were performed for each selected comparison. Monitoring boundaries of statistical significance were constructed and the evidence against the null hypothesis was considered to be strong when the monitoring boundaries were crossed. A significance level was defined as α=5%, power of 90% (β=10%), and an anticipated treatment effect to detect equal to the final estimate from the network meta-analysis. The frequency and time to strong evidence was compared against the null hypothesis between pairwise and network meta-analyses. 49 comparisons of interest from 44 networks were included; most (n=39, 80%) were between active drugs, mainly from the specialties of cardiology, endocrinology, psychiatry, and rheumatology. 29 comparisons were informed by both direct and indirect evidence (59%), 13 by indirect evidence (27%), and 7 by direct evidence (14%). Both network and pairwise meta-analysis provided strong evidence against the null hypothesis for seven comparisons, but for an additional 10
Living network meta-analysis compared with pairwise meta-analysis in comparative effectiveness research: empirical study

PubMed Central

Nikolakopoulou, Adriani; Mavridis, Dimitris; Furukawa, Toshi A; Cipriani, Andrea; Tricco, Andrea C; Straus, Sharon E; Siontis, George C M; Egger, Matthias

2018-01-01

-analysis provided strong evidence against the null hypothesis for seven comparisons, but for an additional 10 comparisons only network meta-analysis provided strong evidence against the null hypothesis (P=0.002). The median time to strong evidence against the null hypothesis was 19 years with living network meta-analysis and 23 years with living pairwise meta-analysis (hazard ratio 2.78, 95% confidence interval 1.00 to 7.72, P=0.05). Studies directly comparing the treatments of interest continued to be published for eight comparisons after strong evidence had become evident in network meta-analysis. Conclusions In comparative effectiveness research, prospectively planned living network meta-analyses produced strong evidence against the null hypothesis more often and earlier than conventional, pairwise meta-analyses. PMID:29490922
The pragmatist's guide to comparative effectiveness research.

PubMed

Chandra, Amitabh; Jena, Anupam B; Skinner, Jonathan S

2011-01-01

Following an acrimonious health care reform debate involving charges of "death panels," in 2010, Congress explicitly forbade the use of cost-effectiveness analysis in government programs of the Patient Protection and Affordable Care Act. In this context, comparative effectiveness research emerged as an alternative strategy to understand better what works in health care. Put simply, comparative effectiveness research compares the efficacy of two or more diagnostic tests, treatments, or health care delivery methods without any explicit consideration of costs. To economists, the omission of costs from an assessment might seem nonsensical, but we argue that comparative effectiveness research still holds promise. First, it sidesteps one problem facing cost-effectiveness analysis--the widespread political resistance to the idea of using prices in health care. Second, there is little or no evidence on comparative effectiveness for a vast array of treatments: for example, we don't know whether proton-beam therapy, a very expensive treatment for prostate cancer (which requires building a cyclotron and a facility the size of a football field) offers any advantage over conventional approaches. Most drug studies compare new drugs to placebos, rather than "head-to-head" with other drugs on the market, leaving a vacuum as to which drug works best. Finally, the comparative effectiveness research can prove a useful first step even in the absence of cost information if it provides key estimates of treatment effects. After all, such effects are typically expensive to determine and require years or even decades of data. Costs are much easier to measure, and can be appended at a later date as financial Armageddon draws closer.
Comparative effectiveness of combined digital mammography and tomosynthesis screening for women with dense breasts.

PubMed

Lee, Christoph I; Cevik, Mucahit; Alagoz, Oguzhan; Sprague, Brian L; Tosteson, Anna N A; Miglioretti, Diana L; Kerlikowske, Karla; Stout, Natasha K; Jarvik, Jeffrey G; Ramsey, Scott D; Lehman, Constance D

2015-03-01

To evaluate the effectiveness of combined biennial digital mammography and tomosynthesis screening, compared with biennial digital mammography screening alone, among women with dense breasts. An established, discrete-event breast cancer simulation model was used to estimate the comparative clinical effectiveness and cost-effectiveness of biennial screening with both digital mammography and tomosynthesis versus digital mammography alone among U.S. women aged 50-74 years with dense breasts from a federal payer perspective and a lifetime horizon. Input values were estimated for test performance, costs, and health state utilities from the National Cancer Institute Breast Cancer Surveillance Consortium, Medicare reimbursement rates, and medical literature. Sensitivity analyses were performed to determine the implications of varying key model parameters, including combined screening sensitivity and specificity, transient utility decrement of diagnostic work-up, and additional cost of tomosynthesis. For the base-case analysis, the incremental cost per quality-adjusted life year gained by adding tomosynthesis to digital mammography screening was $53 893. An additional 0.5 deaths were averted and 405 false-positive findings avoided per 1000 women after 12 rounds of screening. Combined screening remained cost-effective (less than $100 000 per quality-adjusted life year gained) over a wide range of incremental improvements in test performance. Overall, cost-effectiveness was most sensitive to the additional cost of tomosynthesis. Biennial combined digital mammography and tomosynthesis screening for U.S. women aged 50-74 years with dense breasts is likely to be cost-effective if priced appropriately (up to $226 for combined examinations vs $139 for digital mammography alone) and if reported interpretive performance metrics of improved specificity with tomosynthesis are met in routine practice.
Establishing the infrastructure to conduct comparative effectiveness research toward the elimination of disparities: a community-based participatory research framework.

PubMed

Wilson, Danyell S; Dapic, Virna; Sultan, Dawood H; August, Euna M; Green, B Lee; Roetzheim, Richard; Rivers, Brian

2013-11-01

In Tampa, Florida, researchers have partnered with community- and faith-based organizations to create the Comparative Effectiveness Research for Eliminating Disparities (CERED) infrastructure. Grounded in community-based participatory research, CERED acts on multiple levels of society to enhance informed decision making (IDM) of prostate cancer screening among Black men. CERED investigators combined both comparative effectiveness research and community-based participatory research to design a trial examining the effectiveness of community health workers and a digitally enhanced patient decision aid to support IDM in community settings as compared with "usual care" for prostate cancer screening. In addition, CERED researchers synthesized evidence through the development of systematic literature reviews analyzing the effectiveness of community health workers in changing knowledge, attitudes and behaviors of African American adults toward cancer prevention and education. An additional systematic review analyzed chemoprevention agents for prostate cancer as an emerging technique. Both of these reviews, and the comparative effectiveness trial supporting the IDM process, add to CERED's goal of providing evidence to eliminate cancer health disparities.
Establishing the Infrastructure to Conduct Comparative Effectiveness Research Toward the Elimination of Disparities: A Community-Based Participatory Research Framework

PubMed Central

Wilson, Danyell S.; Dapic, Virna; Sultan, Dawood H.; August, Euna M.; Green, B. Lee; Roetzheim, Richard; Rivers, Brian

2014-01-01

In Tampa, Florida, researchers have partnered with community- and faith-based organizations to create the Comparative Effectiveness Research for Eliminating Disparities (CERED) infrastructure. Grounded in community-based participatory research, CERED acts on multiple levels of society to enhance informed decision making (IDM) of prostate cancer screening among Black men. CERED investigators combined both comparative effectiveness research and community-based participatory research to design a trial examining the effectiveness of community health workers and a digitally enhanced patient decision aid to support IDM in community settings as compared with “usual care” for prostate cancer screening. In addition, CERED researchers synthesized evidence through the development of systematic literature reviews analyzing the effectiveness of community health workers in changing knowledge, attitudes and behaviors of African American adults toward cancer prevention and education. An additional systematic review analyzed chemoprevention agents for prostate cancer as an emerging technique. Both of these reviews, and the comparative effectiveness trial supporting the IDM process, add to CERED’s goal of providing evidence to eliminate cancer health disparities. PMID:23431128
Comparative effectiveness research for the clinician researcher: a framework for making a methodological design choice.

PubMed

Williams, Cylie M; Skinner, Elizabeth H; James, Alicia M; Cook, Jill L; McPhail, Steven M; Haines, Terry P

2016-08-17

Comparative effectiveness research compares two active forms of treatment or usual care in comparison with usual care with an additional intervention element. These types of study are commonly conducted following a placebo or no active treatment trial. Research designs with a placebo or non-active treatment arm can be challenging for the clinician researcher when conducted within the healthcare environment with patients attending for treatment.A framework for conducting comparative effectiveness research is needed, particularly for interventions for which there are no strong regulatory requirements that must be met prior to their introduction into usual care. We argue for a broader use of comparative effectiveness research to achieve translatable real-world clinical research. These types of research design also affect the rapid uptake of evidence-based clinical practice within the healthcare setting.This framework includes questions to guide the clinician researcher into the most appropriate trial design to measure treatment effect. These questions include consideration given to current treatment provision during usual care, known treatment effectiveness, side effects of treatments, economic impact, and the setting in which the research is being undertaken.
In vitro properties of concentrated canine platelets stored in two additive solutions: a comparative study.

PubMed

Hlavac, N; Lasta, C S; Dalmolin, M L; Lacerda, L A; de Korte, D; Marcondes, N A; Terra, S R; Fernandes, F B; González, F H D

2017-11-15

Platelet transfusion therapy poses many challenges in veterinary clinical practice. Lack of readily available blood donors, short shelf-life, and inability to administer a sufficient number of platelets to meet a dog's transfusion need are the major difficulties encountered. Platelet additive solutions are already in use at American and European human blood banks, showing to be a realistic alternative. This study compares the in vitro platelet function in plasma, Composol, or SSP+ during storage for 13 days. Platelet rich plasma-platelet concentrate with 35% plasma and 65% platelet additive solutions (Composol or SSP+) and a control group (100% plasma) were prepared. Swirling, platelet count, blood gases, metabolic variables, platelet activation markers, and apoptosis markers were analyzed on days 1, 5, 9 and 13. Swirling was well preserved and pH was acceptable (> 6.2) during storage for all platelet additive solutions units until day 9. SSP + units showed more stable pH and metabolic variables until day 13. Platelets in plasma showed higher glucose consumption than in Composol or in SSP+. The platelet additive solutions units showed better platelet metabolism maintenance, reduced glucose consumption and lactate production. The apoptotic markers were still low for 9 days in platelet concentrates with platelet additive solutions, suggesting the possibility to extend the shelf life with the use of SSP+ or Composol. Our findings suggest that the uses of Composol and SSP+ in canine platelet concentrates are potential alternatives in veterinary blood banks.
Comparative effectiveness research in hand surgery.

PubMed

Johnson, Shepard P; Chung, Kevin C

2014-08-01

Comparative effectiveness research (CER) is a concept initiated by the Institute of Medicine and financially supported by the federal government. The primary objective of CER is to improve decision making in medicine. This research is intended to evaluate the effectiveness, benefits, and harmful effects of alternative interventions. CER studies are commonly large, simple, observational, and conducted using electronic databases. To date, there is little comparative effectiveness evidence within hand surgery to guide therapeutic decisions. To draw conclusions on effectiveness through electronic health records, databases must contain clinical information and outcomes relevant to hand surgery interventions, such as patient-related outcomes. Copyright © 2014 Elsevier Inc. All rights reserved.
Effects of additional interfering signals on adaptive array performance

NASA Technical Reports Server (NTRS)

Moses, Randolph L.

1989-01-01

The effects of additional interference signals on the performance of a fully adaptive array are considered. The case where the number of interference signals exceeds the number of array degrees of freedom is addressed. It is shown how performance is affected as a function of the number of array elements, the number of interference signals, and the directivity of the array antennas. By using directive auxiliary elements, the performance of the array can be as good as the performance when the additional interference signals are not present.
Anti-Vascular Endothelial Growth Factor Comparative Effectiveness Trial for Diabetic Macular Edema: Additional Efficacy Post Hoc Analyses of a Randomized Clinical Trial.

PubMed

Jampol, Lee M; Glassman, Adam R; Bressler, Neil M; Wells, John A; Ayala, Allison R

2016-12-01

Post hoc analyses from the Diabetic Retinopathy Clinical Research Network randomized clinical trial comparing aflibercept, bevacizumab, and ranibizumab for diabetic macular edema (DME) might influence interpretation of study results. To provide additional outcomes comparing 3 anti-vascular endothelial growth factor (VEGF) agents for DME. Post hoc analyses performed from May 3, 2016, to June 21, 2016, of a randomized clinical trial performed from August 22, 2012, to September 23, 2015, of 660 participants comparing 3 anti-VEGF treatments in eyes with center-involved DME causing vision impairment. Randomization to intravitreous aflibercept (2.0 mg), bevacizumab (1.25 mg), or ranibizumab (0.3 mg) administered up to monthly based on a structured retreatment regimen. Focal/grid laser treatment was added after 6 months for the treatment of persistent DME. Change in visual acuity (VA) area under the curve and change in central subfield thickness (CST) within subgroups based on whether an eye received laser treatment for DME during the study. Post hoc analyses were performed for 660 participants (mean [SD] age, 61 [10] years; 47% female, 65% white, 16% black or African American, 16% Hispanic, and 3% other). For eyes with an initial VA of 20/50 or worse, VA improvement was greater with aflibercept than the other agents at 1 year but superior only to bevacizumab at 2 years. Mean (SD) letter change in VA over 2 years (area under curve) was greater with aflibercept (+17.1 [9.7]) than with bevacizumab (+12.1 [9.4]; 95% CI, +1.6 to +7.3; P < .001) or ranibizumab (+13.6 [8.5]; 95% CI, +0.7 to +6.0; P = .009). When VA was 20/50 or worse at baseline, bevacizumab reduced CST less than the other agents at 1 year, but at 2 years the differences had diminished. In subgroups stratified by baseline VA, anti-VEGF agent, and whether focal/grid laser treatment was performed for DME, the only participants to have a substantial reduction in mean CST between 1 and 2 years were those
Supra-additive effects of tramadol and acetaminophen in a human pain model.

PubMed

Filitz, Jörg; Ihmsen, Harald; Günther, Werner; Tröster, Andreas; Schwilden, Helmut; Schüttler, Jürgen; Koppert, Wolfgang

2008-06-01

The combination of analgesic drugs with different pharmacological properties may show better efficacy with less side effects. Aim of this study was to examine the analgesic and antihyperalgesic properties of the weak opioid tramadol and the non-opioid acetaminophen, alone as well as in combination, in an experimental pain model in humans. After approval of the local Ethics Committee, 17 healthy volunteers were enrolled in this double-blind and placebo-controlled study in a cross-over design. Transcutaneous electrical stimulation at high current densities (29.6+/-16.2 mA) induced spontaneous acute pain (NRS=6 of 10) and distinct areas of hyperalgesia for painful mechanical stimuli (pinprick-hyperalgesia). Pain intensities as well as the extent of the areas of hyperalgesia were assessed before, during and 150 min after a 15 min lasting intravenous infusion of acetaminophen (650 mg), tramadol (75 mg), a combination of both (325 mg acetaminophen and 37.5mg tramadol), or saline 0.9%. Tramadol led to a maximum pain reduction of 11.7+/-4.2% with negligible antihyperalgesic properties. In contrast, acetaminophen led to a similar pain reduction (9.8+/-4.4%), but a sustained antihyperalgesic effect (34.5+/-14.0% reduction of hyperalgesic area). The combination of both analgesics at half doses led to a supra-additive pain reduction of 15.2+/-5.7% and an enhanced antihyperalgesic effect (41.1+/-14.3% reduction of hyperalgesic areas) as compared to single administration of acetaminophen. Our study provides first results on interactions of tramadol and acetaminophen on experimental pain and hyperalgesia in humans. Pharmacodynamic modeling combined with the isobolographic technique showed supra-additive effects of the combination of acetaminophen and tramadol concerning both, analgesia and antihyperalgesia. The results might act as a rationale for combining both analgesics.
Comparing Alternative Effect Decomposition Methods: The Role of Literacy in Mediating Educational Effects on Mortality.

PubMed

Nguyen, Thu T; Tchetgen Tchetgen, Eric J; Kawachi, Ichiro; Gilman, Stephen E; Walter, Stefan; Glymour, M Maria

2016-09-01

Inverse odds ratio weighting, a newly proposed tool to evaluate mediation in exposure-disease associations, may be valuable for a host of research questions, but little is known about its performance in real data. We compare this approach to a more conventional Baron and Kenny type of decomposition on an additive hazards scale to estimate total, direct, and indirect effects using the example of the role of literacy in mediating the effects of education on mortality. Health and Retirement Study participants born in the United States between 1900 and 1947 were interviewed biennially for up to 12 years (N = 17,054). Literacy was measured with a brief vocabulary assessment. Decomposition estimates were derived based on Aalen additive hazards models. A 1 standard deviation difference in educational attainment (3 years) was associated with 6.7 fewer deaths per 1000 person-years (β = -6.7, 95% confidence interval [CI]: -7.9, -5.4). Of this decrease, 1.3 fewer deaths (β = -1.3, 95% CI: -4.0, 1.2) were attributed to the literacy pathway (natural indirect), representing 19% of the total effect. Baron and Kenny estimates were consistent with inverse odds ratio weighting estimates but were less variable (natural indirect effect: -1.2 [95% CI: -1.7, -0.69], representing 18% of total effect). In a cohort of older Americans, literacy partially mediated the effect of education on mortality. See Video Abstract at http://links.lww.com/EDE/B78.
Comparative effectiveness research in clinical practice.

PubMed

Lawrence, William F; Chang, Stephanie; Kane, Robert L; Wilt, Timothy J

2014-08-01

The Agency for Healthcare Research and Quality (AHRQ) has funded systematic reviews of comparative effectiveness research in 17 areas over the last 10 years as part of a federal mandate. These reviews provide a reliable and unbiased source of comprehensive information about the effectiveness and risks of treatment alternatives for patients and clinicians. This article describes comparative effectiveness research, provides an overview of how physicians can use it in clinical practice, and references important contributions made by the Minnesota Evidence-based Practice Center.
Application of rhamnolipid and surfactin for enhanced diesel biodegradation--effects of pH and ammonium addition.

PubMed

Whang, Liang-Ming; Liu, Pao-Wen G; Ma, Chih-Chung; Cheng, Sheng-Shung

2009-05-30

This study investigated the effects of pH and ammonium concentrations on the potential application of two biosurfactants, surfactin (SF) and rhamnolipid (RL), for enhanced diesel biodegradation with a series of bench-scale experiments. In general, compared to the experiments without biosurfactant addition, adding RL or SF to diesel-water systems at concentrations above their critical micelle concentration (CMC) values benefited diesel emulsification, and therefore enhanced diesel biodegradation. The effects of pH on RL or SF-enhanced biodegradation of diesel were in good agreement with the trends of emulsion index values for RL or SF addition, respectively, under different pH conditions, suggesting that enhanced diesel emulsification by RL or SF addition promoted biodegradation of diesel. In diesel-water systems with 50mg/L of RL addition, an optimum pH condition for microbial growth and diesel biodegradation was found to be at a pH 7.2, while decreasing pH to 5.2 or increasing it to 8.4 reduced those parameters considerably. For the cases where 40 mg/L of SF was added, the enhancing ability shared a general trend with that observed for adding 50mg/L of RL as the pH increased from 5.2 to 7.2. Further increase of pH to 8.4, however, did not seem to negatively influence biodegradation and biomass growth. With respect to the effects of ammonium concentration on diesel biodegradation in diesel-water systems with 50mg/L of RL addition, an optimum ammonium addition for microbial growth and diesel biodegradation was found between 200 and 300 mg-N/L, but a dramatic decrease in growth and biodegradation occurred at ammonium addition up to 450 mg-N/L. For the cases where 40 mg/L of SF was added, an increase of ammonium addition from 50 to 200mg-N/L substantially increased microbial growth and biodegradation of diesel. Further increase of ammonium concentration to 450 mg-N/L, however, did not further improve diesel biodegradation.
Modulation of Additive and Interactive Effects in Lexical Decision by Trial History

ERIC Educational Resources Information Center

Masson, Michael E. J.; Kliegl, Reinhold

2013-01-01

Additive and interactive effects of word frequency, stimulus quality, and semantic priming have been used to test theoretical claims about the cognitive architecture of word-reading processes. Additive effects among these factors have been taken as evidence for discrete-stage models of word reading. We present evidence from linear mixed-model…
Effect of polyglycerol esters additive on palm oil crystallization using focused beam reflectance measurement and differential scanning calorimetry.

PubMed

Saw, M H; Hishamuddin, E; Chong, C L; Yeoh, C B; Lim, W H

2017-01-01

The effect of 0.1-0.7% (w/w) of polyglycerol esters (PGEmix-8) on palm oil crystallization was studied using focused beam reflectance measurement (FBRM) to analyze the in-line changes of crystal size distribution during the crystallization. FBRM results show that 0.1-0.5% (w/w) of PGEmix-8 did not significantly affect nucleation but slightly retarded crystal growth. The use of 0.7% (w/w) additive showed greater heterogeneous nucleation compared to those with lower dosages of additive. Crystal growth was also greatly reduced when using 0.7% (w/w) dosage. The morphological study indicated that the palm oil crystals were smaller and more even in size than when more additive was added. Isothermal crystallization studies using differential scanning calorimetry (DSC) showed increased inhibitory effects on palm oil crystal growth with increasing concentration of PGEmix-8. These results imply that PGEmix-8 is a nucleation enhancing and crystal growth retarding additive in palm oil crystallization at 0.7% (w/w) dosage. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Effects of stimulus order on discrimination processes in comparative and equality judgements: data and models.

PubMed

Dyjas, Oliver; Ulrich, Rolf

2014-01-01

In typical discrimination experiments, participants are presented with a constant standard and a variable comparison stimulus and their task is to judge which of these two stimuli is larger (comparative judgement). In these experiments, discrimination sensitivity depends on the temporal order of these stimuli (Type B effect) and is usually higher when the standard precedes rather than follows the comparison. Here, we outline how two models of stimulus discrimination can account for the Type B effect, namely the weighted difference model (or basic Sensation Weighting model) and the Internal Reference Model. For both models, the predicted psychometric functions for comparative judgements as well as for equality judgements, in which participants indicate whether they perceived the two stimuli to be equal or not equal, are derived and it is shown that the models also predict a Type B effect for equality judgements. In the empirical part, the models' predictions are evaluated. To this end, participants performed a duration discrimination task with comparative judgements and with equality judgements. In line with the models' predictions, a Type B effect was observed for both judgement types. In addition, a time-order error, as indicated by shifts of the psychometric functions, and differences in response times were observed only for the equality judgement. Since both models entail distinct additional predictions, it seems worthwhile for future research to unite the two models into one conceptual framework.
Evidence for dose-additive effects of pyrethroids on motor activity in rats.

PubMed

Wolansky, Marcelo J; Gennings, Chris; DeVito, Michael J; Crofton, Kevin M

2009-10-01

Pyrethroids are neurotoxic insecticides used in a variety of indoor and outdoor applications. Previous research characterized the acute dose-effect functions for 11 pyrethroids administered orally in corn oil (1 mL/kg) based on assessment of motor activity. We used a mixture of these 11 pyrethroids and the same testing paradigm used in single-compound assays to test the hypothesis that cumulative neurotoxic effects of pyrethroid mixtures can be predicted using the default dose-addition theory. Mixing ratios of the 11 pyrethroids in the tested mixture were based on the ED30 (effective dose that produces a 30% decrease in response) of the individual chemical (i.e., the mixture comprised equipotent amounts of each pyrethroid). The highest concentration of each individual chemical in the mixture was less than the threshold for inducing behavioral effects. Adult male rats received acute oral exposure to corn oil (control) or dilutions of the stock mixture solution. The mixture of 11 pyrethroids was administered either simultaneously (2 hr before testing) or after a sequence based on times of peak effect for the individual chemicals (4, 2, and 1 hr before testing). A threshold additivity model was fit to the single-chemical data to predict the theoretical dose-effect relationship for the mixture under the assumption of dose additivity. When subthreshold doses of individual chemicals were combined in the mixtures, we found significant dose-related decreases in motor activity. Further, we found no departure from the predicted dose-additive curve regardless of the mixture dosing protocol used. In this article we present the first in vivo evidence on pyrethroid cumulative effects supporting the default assumption of dose addition.
Obstructive sleep apnea combined dyslipidemia render additive effect on increasing atherosclerotic cardiovascular diseases prevalence.

PubMed

Cao, Zhiyong; Zhang, Ping; He, Zhiqing; Yang, Jing; Liang, Chun; Ren, Yusheng; Wu, Zonggui

2016-05-26

Current study was designed to investigate the effects of obstructive sleep apnea (OSA) combined dyslipidemia on the prevalence of atherosclerotic cardiovascular diseases (ASCVD). This was a cross-sectional study and subjects with documented dyslipidemia and without previous diagnosis of OSA were enrolled. Polysomnography was applied to evaluate apnea-hypopnea index (AHI). Based on AHI value, subjects were classified into four groups: without OSA, mild, moderate and severe OSA groups. Clinical characteristics and laboratory examination data were recorded. Relationship between AHI event and lipid profiles was analyzed, and logistic regression analysis was used to evaluate the effects of OSA combined dyslipidemia on ASCVD prevalence. Totally 248 subjects with dyslipidemia were enrolled. Compared to the other 3 groups, subjects with severe OSA were older, male predominant and had higher smoking rate. In addition, subjects with severe OSA had higher body mass index, waist-hip ratio, blood pressure, and higher rates of overweight and obesity. Serum levels of fasting plasma glucose, glycated hemoglobin, LDL-C and CRP were all significantly higher. ASCVD prevalence was considerably higher in subjects with severe OSA. AHI event in the severe OSA group was up to 35.4 ± 5.1 events per hour which was significantly higher than the other groups (P < 0.05 for trend). Pearson correlation analysis showed that only LDL-C was positively correlated with AHI events (r = 0.685, P < 0.05). Logistic regression analysis revealed that in unadjusted model, compared to dyslipidemia plus no-OSA group (reference group), OSA enhanced ASCVD risk in subjects with dyslipidemia, regardless of OSA severity. After extensively adjusted for confounding variables, the odds of dyslipidemia plus mild-OSA was reduced to insignificance. While the effects of moderate- and severe-OSA on promoting ASCVD risk in subjects with dyslipidemia remained significant, with severe-OSA most prominent (odds ratio: 1
Additivity of Feature-Based and Symmetry-Based Grouping Effects in Multiple Object Tracking

PubMed Central

Wang, Chundi; Zhang, Xuemin; Li, Yongna; Lyu, Chuang

2016-01-01

Multiple object tracking (MOT) is an attentional process wherein people track several moving targets among several distractors. Symmetry, an important indicator of regularity, is a general spatial pattern observed in natural and artificial scenes. According to the “laws of perceptual organization” proposed by Gestalt psychologists, regularity is a principle of perceptual grouping, such as similarity and closure. A great deal of research reported that feature-based similarity grouping (e.g., grouping based on color, size, or shape) among targets in MOT tasks can improve tracking performance. However, no additive feature-based grouping effects have been reported where the tracking objects had two or more features. “Additive effect” refers to a greater grouping effect produced by grouping based on multiple cues instead of one cue. Can spatial symmetry produce a similar grouping effect similar to that of feature similarity in MOT tasks? Are the grouping effects based on symmetry and feature similarity additive? This study includes four experiments to address these questions. The results of Experiments 1 and 2 demonstrated the automatic symmetry-based grouping effects. More importantly, an additive grouping effect of symmetry and feature similarity was observed in Experiments 3 and 4. Our findings indicate that symmetry can produce an enhanced grouping effect in MOT and facilitate the grouping effect based on color or shape similarity. The “where” and “what” pathways might have played an important role in the additive grouping effect. PMID:27199875
Bright metal coatings from sustainable electrolytes: the effect of molecular additives on electrodeposition of nickel from a deep eutectic solvent.

PubMed

Abbott, Andrew P; Ballantyne, Andrew; Harris, Robert C; Juma, Jamil A; Ryder, Karl S

2017-01-25

Organic and inorganic additives are often added to nickel electroplating solutions to improve surface finish, reduce roughness and promote uniform surface morphology of the coatings. Such additives are usually small molecules and often referred to as brighteners or levellers. However, there have been limited investigations into the effect of such additives on electrodeposition from ionic liquids (ILs) and deep eutectic solvents (DESs). Here we study the effect of four additives on electrolytic nickel plating from an ethyleneglycol based DES; these are nicotinic acid (NA), methylnicotinate (MN), 5,5-dimethylhydantoin (DMH) and boric acid (BA). The additives show limited influence on the bulk Ni(ii) speciation but have significant influence on the electrochemical behaviour of Ni deposition. Small concentrations (ca. 15 mM) of NA and MN show inhibition of Ni(ii) reduction whereas high concentrations of DMH and BA are required for a modest difference in behaviour from the additive free system. NA and MN also show that they significantly alter the nucleation and growth mechanism when compared to the additive free system and those with DMH and BA. Each of the additive systems had the effect of producing brighter and flatter bulk electrodeposits with increased coating hardness but XRD shows that NA and MN direct crystal growth to the [111] orientation whereas DMH and BA direct crystal growth to the [220] orientation.
Cost-effectiveness of endobronchial valve treatment in patients with severe emphysema compared to standard medical care.

PubMed

Hartman, Jorine E; Klooster, Karin; Groen, Henk; Ten Hacken, Nick H T; Slebos, Dirk-Jan

2018-03-25

Bronchoscopic lung volume reduction using endobronchial valves (EBV) is an effective new treatment option for severe emphysema patients without interlobar collateral ventilation. The objective of this study was to perform an economic evaluation including the costs and cost-effectiveness of EBV treatment compared with standard medical care (SoC) from the hospital perspective in the short term and long term. For the short-term evaluation, incremental cost-effectiveness ratios (ICER) were calculated based on the 6-month end point data from the STELVIO randomized trial. For the long-term evaluation, a Markov simulation model was constructed based on STELVIO and literature. The clinical outcome data were quality-adjusted life-years (QALY) based on the EuroQol5-Dimensions (EQ5D) questionnaire, the 6-min walking distance (6MWD) and the St George's Respiratory Questionnaire (SGRQ). The mean difference between the EBV group and controls was €16 721/patient. In the short-term (6 months), costs per additional QALY was €205 129, the ICER for 6MWD was €160 and for SGRQ was €1241. In the long term, the resulting cost-effectiveness ratios indicate additional costs of €39 000 per QALY gained with a 5-year time horizon and €21 500 per QALY gained at 10 years. In comparison, historical costs per additional QALY 1 year after the coil treatment are €738 400, 5 years after lung volume reduction surgery are €48 415 and 15 years after double-lung transplantation are €29 410. The positive clinical effects of EBV treatment are associated with increased costs compared with SoC. Our results suggest that the EBV treatment has a favourable cost-effectiveness profile, also when compared with other treatment modalities for this patient group. © 2018 Asian Pacific Society of Respirology.
An experimental survey of additives for improving dehydrogenation properties of magnesium hydride

NASA Astrophysics Data System (ADS)

Zhou, Chengshang; Fang, Zhigang Zak; Sun, Pei

2015-03-01

The use of a wide range of additives has been known as an important method for improving hydrogen storage properties of MgH2. There is a lack of a standard methodology, however, that can be used to select or compare the effectiveness of different additives. A systematic experimental survey was carried out in this study to compare a wide range of additives including transitions metals, transition metal oxides, hydrides, intermetallic compounds, and carbon materials, with respect to their effects on dehydrogenation properties of MgH2. MgH2 with various additives were prepared by using a high-energy-high-pressure planetary ball milling method and characterized by using thermogravimetric analysis (TGA) techniques. The results showed that additives such as Ti and V-based metals, hydride, and certain intermetallic compounds have strong catalytic effects. Additives such as Al, In, Sn, Si showed minor effects on the kinetics of the dehydrogenation of MgH2, while exhibiting moderate thermodynamic destabilizing effects. In combination, MgH2 with both kinetic and thermodynamic additives, such as the MgH2-In-TiMn2 system, exhibited a drastically decreased dehydrogenation temperature.
Effects of concentrated and dephytinized wheat bran and rice bran addition on bread properties.

PubMed

Özkaya, Berrin; Baumgartner, Burcu; Özkaya, Hazım

2018-02-01

Wheat bran and rice bran were concentrated in terms of dietary fiber and were dephytinized by two different methods (fermentation and hydrothermal). Untreated, concentrated, concentrated-dephytinized by fermentation method, and concentrated-dephytinized by hydrothermal method bran samples were each incorporated into flour at levels of 0, 10, 15, and 20%, and their effects on bread properties were investigated. Unprocessed wheat bran and rice bran addition decreased the volume yield, and the specific volume of the bread depends on the incorporation level. A further decrease was observed with the addition of concentrated bran. However, the dephytinization treatments slightly improved these values. The same pattern was observed for the total number of cells and the total cell area of bread crumbs. Both wheat bran and rice bran were observed to cause a darker crumb color, and the effects of bran samples on crumb color were more pronounced after the dephytinization treatment. The addition of concentrated wheat bran and rice bran significantly increased hardness, as well as decreasing springiness, cohesiveness, and resilience of the bread, depending on the bran levels. Although dephytinization treatments enhanced the textural properties of bread, these results were still inferior to those obtained using bread produced with untreated bran. Regarding the dephytinization treatments, the influence of fermentation treatment on bread properties was slightly beneficial compared to hydrothermal treatment. Consumption of dietary fiber offers a range of health benefits. Cereal bran has great potential as a dietary fiber source. However, this bran's high phytic acid content and adverse effects on bread quality limit that potential. It is possible to obtain high dietary fiber and low phytic acid bran samples through bran concentration and dephytinization treatments. The dephytinization treatment is an effective method for degradation of phytic acid. The negative effects of wheat
Evidence for Dose-Additive Effects of Pyrethroids on Motor Activity in Rats

PubMed Central

Wolansky, Marcelo J.; Gennings, Chris; DeVito, Michael J.; Crofton, Kevin M.

2009-01-01

Background Pyrethroids are neurotoxic insecticides used in a variety of indoor and outdoor applications. Previous research characterized the acute dose–effect functions for 11 pyrethroids administered orally in corn oil (1 mL/kg) based on assessment of motor activity. Objectives We used a mixture of these 11 pyrethroids and the same testing paradigm used in single-compound assays to test the hypothesis that cumulative neurotoxic effects of pyrethroid mixtures can be predicted using the default dose–addition theory. Methods Mixing ratios of the 11 pyrethroids in the tested mixture were based on the ED30 (effective dose that produces a 30% decrease in response) of the individual chemical (i.e., the mixture comprised equipotent amounts of each pyrethroid). The highest concentration of each individual chemical in the mixture was less than the threshold for inducing behavioral effects. Adult male rats received acute oral exposure to corn oil (control) or dilutions of the stock mixture solution. The mixture of 11 pyrethroids was administered either simultaneously (2 hr before testing) or after a sequence based on times of peak effect for the individual chemicals (4, 2, and 1 hr before testing). A threshold additivity model was fit to the single-chemical data to predict the theoretical dose–effect relationship for the mixture under the assumption of dose additivity. Results When subthreshold doses of individual chemicals were combined in the mixtures, we found significant dose-related decreases in motor activity. Further, we found no departure from the predicted dose-additive curve regardless of the mixture dosing protocol used. Conclusion In this article we present the first in vivo evidence on pyrethroid cumulative effects supporting the default assumption of dose addition. PMID:20019907
Comparative effectiveness of audit-feedback versus additional physician communication training to improve cancer screening for patients with limited health literacy.

PubMed

Price-Haywood, Eboni G; Harden-Barrios, Jewel; Cooper, Lisa A

2014-08-01

We designed a continuing medical education (CME) program to teach primary care physicians (PCP) how to engage in cancer risk communication and shared decision making with patients who have limited health literacy (HL). We evaluated whether training PCPs, in addition to audit-feedback, improves their communication behaviors and increases cancer screening among patients with limited HL to a greater extent than only providing clinical performance feedback. Four-year cluster randomized controlled trial. Eighteen PCPs and 168 patients with limited HL who were overdue for colorectal/breast/cervical cancer screening. Communication intervention PCPs received skills training that included standardized patient (SP) feedback on counseling behaviors. All PCPs underwent chart audits of patients' screening status semiannually up to 24 months and received two annual performance feedback reports. PCPs experienced three unannounced SP encounters during which SPs rated PCP communication behaviors. We examined between-group differences in changes in SP ratings and patient knowledge of cancer screening guidelines over 12 months; and changes in patient cancer screening rates over 24 months. There were no group differences in SP ratings of physician communication at baseline. At follow-up, communication intervention PCPs were rated higher in general communication about cancer risks and shared decision making related to colorectal cancer screening compared to PCPs who only received performance feedback. Screening rates increased among patients of PCPs in both groups; however, there were no between-group differences in screening rates except for mammography. The communication intervention did not improve patient cancer screening knowledge. Compared to audit and feedback alone, including PCP communication training increases PCP patient-centered counseling behaviors, but not cancer screening among patients with limited HL. Larger studies must be conducted to determine whether lack of
Effect of metallic additives on in situ combustion of Huntington Beach crude experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baena, C.J.; Castanier, L.M.; Brigham, W.E.

1990-08-01

The economics and applicability of an in-situ combustion process for the recovery of crude oil are dictated to a large extent by the nature and the amount of fuel formed during the process. The aim of this work is to use combustion tube studies to determine on a quantitative basis, how the nature and the amount of fuel formed could be changed by the presence of metallic additives. These experiments follow from the qualitative observations on the effect of metallic additives on the in-situ combustion of Huntington Beach crude oil made by De los Rios (1987) at SUPRI. He performedmore » kinetic studies on the oxidation of Huntington Beach crude in porous media and showed that the nature of the fuel formed changed when metallic additives were present. Combustion tube runs were performed using the metallic additives: ferrous chloride (FeCl{sub 2{center dot}}4H{sub 2}O), zinc chloride (ZnCl{sub 2}) and stannic chloride (SnCl{sub 4{center dot}}5H{sub 2}O). Unconsolidated cores were prepared by mixing predetermined amounts of an aqueous solution of the metal salt, Huntington Beach crude oil, Ottawa sand and clay in order to achieve the desired fluid saturations. The mixture was then tamped into the combustion tube. Dry air combustion tube runs were performed keeping the conditions of saturation, air flux and injection pressure approximately the same during each run. The nature of the fuel formed and its impact on the combustion parameters were determined and compared with a control run -- an experiment performed with no metallic additive. 30 refs., 33 figs., 6 tabs.« less
Effect of Copper and Zirconium Addition on Properties of Fe-Co-Si-B-Nb Bulk Metallic Glasses

NASA Astrophysics Data System (ADS)

Ikram, Haris; Khalid, Fazal Ahmad; Akmal, Muhammad; Abbas, Zameer

2017-07-01

In this research work, iron-based bulk metallic glasses (BMGs) have been fabricated, characterized and compared with Fe-Si alloy. BMG alloys of composition ((Fe0.6Co0.4)0.75B0.20Si0.05)96Nb4) were synthesized by suction casting technique using chilled copper die. Effect of copper and zirconium addition on magnetic, mechanical, thermal and electrochemical behavior of ((Fe0.6Co0.4)0.75B0.20Si0.05)96Nb4 BMGs was investigated. Furthermore, effect of annealing on nano-crystallization and subsequently on magnetic and mechanical behavior was also analyzed. Amorphousness of structure was evidenced by XRD analysis and microscopic visualization, whereas nano-crystallization behavior was identified by peak broadening of XRD patterns. Magnetic properties, measured by vibrating sample magnetometer, were found to be improved for as-cast BMG alloys by copper addition and further enhanced by nano-crystallization after annealing. Mechanical properties were observed to be increased by zirconium addition while slightly declined by copper addition. Potentiodynamic polarization analysis manifested the positive role of zirconium in enhancing corrosion resistance of BMGs in acidic, basic and brine mediums. Moreover, mechanical properties and corrosion analysis results affirmed the superiority of BMG alloys over Fe-Si alloy.
Interactive effects between N addition and disturbance on boreal forest ecosystem structure and function

NASA Astrophysics Data System (ADS)

Nordin, Annika; Strengbom, Joachim; From, Fredrik

2014-05-01

In management of boreal forests, nitrogen (N) enrichment from atmospheric deposition or from forest fertilization can appear in combination with land-use related disturbances, i.e. tree harvesting by clear-felling. Long-term interactive effects between N enrichment and disturbance on boreal forest ecosystem structure and function are, however, poorly known. We investigated effects of N enrichment by forest fertilization done > 25 years ago on forest understory species composition in old-growth (undisturbed) forests, and in forests clear-felled 10 years ago (disturbed). In clear-felled forests we also investigated effects of the previous N addition on growth of tree saplings. The results show that the N enrichment effect on the understory species composition was strongly dependent on the disturbance caused by clear-felling. In undisturbed forests, there were small or no effects on understory species composition from N addition. In contrast, effects were large in forests first exposed to N addition and subsequently disturbed by clear-felling. Effects of N addition differed among functional groups of plants. Abundance of graminoids increased (+232%) and abundance of dwarf shrubs decreased (-44%) following disturbance in N fertilized forests. For vascular plants, the two perturbations had contrasting effects on α-(within forests) and β-diversity (among forests): in disturbed forests, N addition reduced, or had no effect on α-diversity, while β-diversity increased. For bryophytes, negative effects of disturbance on α-diversity were smaller in N fertilized forests than in forests not fertilized, while neither N addition nor disturbance had any effects on β-diversity. Moreover, sapling growth in forests clear-felled 10 years ago was significantly higher in previously N fertilized forests than in forests not fertilized. Our study show that effects of N addition on plant communities may appear small, short-lived, or even absent until exposed to a disturbance. This
Comparative effectiveness: its role in the healthcare system.

PubMed

Brown, Melissa M; Luo, Betsy; Brown, Heidi C; Brown, Gary C

2009-05-01

To describe comparative effectiveness and assess its role in crafting new healthcare policy. Senate Bill S.3408 would establish a nongovernment-affiliated Healthcare Comparative Effectiveness Research Institute that would work with healthcare experts and stakeholders in healthcare to prioritize interventions and services to be studied. A value-based medicine system of standardized comparative effectiveness and cost-effectiveness data using utilities would allow physicians to assess the total value (improvement in quality of life and/or length of life) conferred by interventions. Standardized comparativeness and cost-effectiveness data will give physicians an information system to identify the interventions that confer the greatest value to patients, and thus deliver higher quality care than possible with evidence-based data alone while allowing the most cost-effective care.
Additive effects of nicotine and high-fat diet on hepatic steatosis in male mice.

PubMed

Friedman, Theodore C; Sinha-Hikim, Indrani; Parveen, Meher; Najjar, Sonia M; Liu, Yanjun; Mangubat, Michael; Shin, Chang-Sung; Lyzlov, Alexei; Ivey, Rasheed; Shaheen, Magda; French, Samuel W; Sinha-Hikim, Amiya P

2012-12-01

Smoking is a major risk factor for diabetes and cardiovascular disease and may contribute to nonalcoholic fatty liver disease. We hypothesize that in the presence of nicotine, high-fat diet (HFD) causes more severe hepatic steatosis in obese mice. Adult C57BL6 male mice were fed a normal chow diet or HFD and received twice daily injections of nicotine (0.75 mg/kg body weight, ip) or saline for 10 wk. Light microscopic image analysis revealed significantly higher lipid accumulation in livers from mice on HFD plus nicotine (190 ± 19 μm(2)), compared with mice on HFD alone (28 ± 1.2 μm(2)). A significant reduction in the percent volume of endoplasmic reticulum (67.8%) and glycogen (49.2%) was also noted in hepatocytes from mice on HFD plus nicotine, compared with mice on HFD alone. The additive effects of nicotine on the severity of HFD-induced hepatic steatosis was associated with significantly greater oxidative stress, increased hepatic triglyceride levels, higher incidence of hepatocellular apoptosis, inactivation (dephosphorylation) of AMP-activated protein kinase, and activation of its downstream target acetyl-coenzyme A-carboxylase. Treatment with acipimox, an inhibitor of lipolysis, significantly reduced nicotine plus HFD-induced hepatic lipid accumulation. We conclude that: 1) greater oxidative stress coupled with inactivation of AMP-activated protein kinase mediate the additive effects of nicotine and HFD on hepatic steatosis in obese mice and 2) increased lipolysis is an important contributor to hepatic steatosis. We surmise that nicotine exposure is likely to exacerbate the metabolic abnormalities induced by high-fat intake in obese patients.
Nutrient additions in pristine Patagonian Sphagnum bog vegetation: can phosphorus addition alleviate (the effects of) increased nitrogen loads.

PubMed

Fritz, C; van Dijk, G; Smolders, A J P; Pancotto, V A; Elzenga, T J T M; Roelofs, J G M; Grootjans, A P

2012-05-01

Sphagnum-bog ecosystems have a limited capability to retain carbon and nutrients when subjected to increased nitrogen (N) deposition. Although it has been proposed that phosphorus (P) can dilute negative effects of nitrogen by increasing biomass production of Sphagnum mosses, it is still unclear whether P-addition can alleviate physiological N-stress in Sphagnum plants. A 3-year fertilisation experiment was conducted in lawns of a pristine Sphagnum magellanicum bog in Patagonia, where competing vascular plants were practically absent. Background wet deposition of nitrogen was low (≈ 0.1-0.2 g · N · m(-2) · year(-1)). Nitrogen (4 g · N · m(-2) · year(-1)) and phosphorus (1 g · P · m(-2) · year(-1)) were applied, separately and in combination, six times during the growing season. P-addition substantially increased biomass production of Sphagnum. Nitrogen and phosphorus changed the morphology of Sphagnum mosses by enhancing height increment, but lowering moss stem density. In contrast to expectations, phosphorus failed to alleviate physiological stress imposed by excess nitrogen (e.g. amino acid accumulation, N-saturation and decline in photosynthetic rates). We conclude that despite improving growth conditions by P-addition, Sphagnum-bog ecosystems remain highly susceptible to nitrogen additions. Increased susceptibility to desiccation by nutrients may even worsen the negative effects of excess nitrogen especially in windy climates like in Patagonia. © 2011 German Botanical Society and The Royal Botanical Society of the Netherlands.
Comparative effectiveness of the SNaP™ Wound Care System.

PubMed

Hutton, David W; Sheehan, Peter

2011-04-01

Diabetic lower extremity wounds cause substantial burden to healthcare systems, costing tens of thousands of dollars per episode. Negative pressure wound therapy (NPWT) devices have been shown to be cost-effective at treating these wounds, but the traditional devices use bulky electrical pumps that require a durable medical equipment rental-based procurement process. The Spiracur SNaP™ Wound Care System is an ultraportable NPWT system that does not use an electric pump and is fully disposable. It has superior healing compared to standard of care with modern dressings and comparable healing to traditional NPWT devices while giving patients greater mobility and giving clinicians a simpler procurement process. We used a mathematical model to analyse the costs of the SNaP™ system and compare them to standard of care and electrically powered NPWT devices. When compared to standard of care, the SNaP™ system saves over $9000 per wound treated and more than doubles the number of patients healed. The SNaP system has similar healing time to powered NPWT devices, but saves $2300 in Medicare payments or $2800 for private payers per wound treated. Our analysis shows that the SNaP™ system could save substantial treatment costs in addition to allowing patients greater freedom and mobility. © 2011 The Authors. © 2011 Blackwell Publishing Ltd and Medicalhelplines.com Inc.
Quantification of Treatment Effect Modification on Both an Additive and Multiplicative Scale

PubMed Central

Girerd, Nicolas; Rabilloud, Muriel; Pibarot, Philippe; Mathieu, Patrick; Roy, Pascal

2016-01-01

Background In both observational and randomized studies, associations with overall survival are by and large assessed on a multiplicative scale using the Cox model. However, clinicians and clinical researchers have an ardent interest in assessing absolute benefit associated with treatments. In older patients, some studies have reported lower relative treatment effect, which might translate into similar or even greater absolute treatment effect given their high baseline hazard for clinical events. Methods The effect of treatment and the effect modification of treatment were respectively assessed using a multiplicative and an additive hazard model in an analysis adjusted for propensity score in the context of coronary surgery. Results The multiplicative model yielded a lower relative hazard reduction with bilateral internal thoracic artery grafting in older patients (Hazard ratio for interaction/year = 1.03, 95%CI: 1.00 to 1.06, p = 0.05) whereas the additive model reported a similar absolute hazard reduction with increasing age (Delta for interaction/year = 0.10, 95%CI: -0.27 to 0.46, p = 0.61). The number needed to treat derived from the propensity score-adjusted multiplicative model was remarkably similar at the end of the follow-up in patients aged < = 60 and in patients >70. Conclusions The present example demonstrates that a lower treatment effect in older patients on a relative scale can conversely translate into a similar treatment effect on an additive scale due to large baseline hazard differences. Importantly, absolute risk reduction, either crude or adjusted, can be calculated from multiplicative survival models. We advocate for a wider use of the absolute scale, especially using additive hazard models, to assess treatment effect and treatment effect modification. PMID:27045168
Comparative Effectiveness of Conservative Management Compared to Cryotherapy in Localized Prostate Cancer Patients.

PubMed

Shah, Surbhi; Young, Henry N; Cobran, Ewan K

2018-06-01

The high frequency of treatment-related side effects for men with localized prostate cancer creates uncertainty for treatment outcomes. This study assessed the comparative effectiveness of treatment-related side effects associated with conservative management and cryotherapy in patients with localized prostate cancer. A retrospective longitudinal cohort study was conducted, using the linked data of the Surveillance, Epidemiology, and End Results and Medicare, which included patients diagnosed from 2000 through year 2013, and their Medicare claims information from 2000 through 2014. To compare the differences in baseline characteristics and treatment-related side effects between the study cohorts, χ 2 tests were conducted. Multivariate logistic regression was used to assess the association between treatment selection and side effects. There were 7,998 and 3,051 patients in the conservative management and cryotherapy cohort, respectively. The likelihood of erectile dysfunction, lower urinary tract obstruction, urinary fistula, urinary incontinence, and hydronephrosis was reported to be significantly lower (53%, 35%, 69%, 65%, and 36%, respectively) in the conservative management cohort. Conservative management had a lower likelihood of treatment-related side effects compared to cryotherapy. However, further research is needed to compare other significant long-term outcomes such as costs associated with these treatment choices and quality of life.
Effect of dietary addition of seaweed and licorice on the immune performance of pigs.

PubMed

Katayama, Masafumi; Fukuda, Tomokazu; Okamura, Toshihiro; Suzuki, Eisaku; Tamura, Katsuo; Shimizu, Yuuko; Suda, Yoshihito; Suzuki, Keiichi

2011-04-01

In pig production, dietary additive antibiotics are usually used for growth stimulation and disease prevention, although there is public concern about the increased incidence of resistant antibiotics and food safety. It is possible that such antibiotics might be replaced by naturally derived products such as seaweed and licorice. In this study, we evaluated the effect of dietary addition of seaweed and licorice on enhancing the immune function in swine. The animals of each group (eight animals per group) were sensitized at day 42 and 49, and the immunoglobulin production and the expression of cytokines were detected by the ELISA and real-time PCR. As the results, saliva IgA production of the seaweed-treated group increased around five times compared to that of control (day 56). Delayed hypersensitivity reaction and IgG production of the seaweed-treated group increased around 1.8-2.0 times. In addition, enhanced saliva IgA production was detected at day 50 (around two times) and day 51 (around five times) by the licorice treatment, and lower expression level of tumor necrosis factor-α messenger RNA at day 51 (around 1/25) was observed in the licorice treatment. We conclude that the replacement of antibiotics by naturally derived dietary additives might be feasible for immune system enhancement. © 2010 The Authors. Journal compilation © 2010 Japanese Society of Animal Science.

Comparative effectiveness research in practice and policy for radiation oncology.

PubMed

Lawrence, William F

2014-01-01

Interest in comparative effectiveness research (CER) has increased dramatically over the past decade, yet perceptions about what comprises CER varies. CER has several attributes relevant to practice and policy: (1) The goal of CER is to inform decisions about health care. (2) Literature synthesis is used in addition to primary research. (3) CER evaluates not only overall outcomes for the population but also evaluates subgroups that may have heterogeneous outcomes. (4) Research places an emphasis on outcomes in the "real-world" settings. (5) Outcomes studied should be relevant to patients. In radiation oncology, where many of the traditional clinical trials are comparative in nature, the line between CER and "traditional" research may be blurred, but an increased emphasis on CER can help to bridge the research enterprise and clinical practice, helping to inform decision making at the patient, clinician, and policy levels. © 2013 Published by Elsevier Inc.
The combined effects of vinclozolin and procymidone do not deviate from expected additivity in vitro and in vivo.

PubMed

Nellemann, Christine; Dalgaard, Majken; Lam, Henrik Rye; Vinggaard, Anne Marie

2003-02-01

The combination effects of the well-known antiandrogenic fungicides, vinclozolin and procymidone, were tested both in vitro and in vivo. In vitro both vinclozolin and procymidone significantly inhibited the binding of agonist to the androgen receptor with the concentration that resulted in 50% inhibition (IC(50)) values of 0.1 and 0.6 micro M, respectively. By applying the isobole method, the effect of combining the two pesticides in vitro was found to be additive. In castrated testosterone-treated rats the administration of vinclozolin starting at 10 mg/kg led to a decrease in organ weight of all tested reproductive organs. The levels of luteinizing hormone (LH) and follicle stimulating hormone (FSH) were increased significantly with doses of 100 mg/kg vinclozolin and above. Expression of the androgen-responsive gene, TRPM-2, was increased starting at 100 mg/kg vinclozolin. For procymidone, reproductive organ weights were diminished at 10 mg/kg and LH was increased at a concentration of 25 mg/kg and above, compared to the testosterone-treated controls. FSH was significantly increased only at 25 mg/kg procymidone. The studied gene expressions were changed by 100 mg/kg procymidone. Dosing the animals with a combination of a 1:1 mixture of vinclozolin and procymidone resulted in a weight reduction in the reproductive organs and an increase of serum LH and FSH as early as with 10 mg/kg combined dose. The relative expressions of TRPM-2 and PBP C3 were changed compared to controls at 100 mg/kg. The level of 5-HT in the rat brain was increased after a dose of 10 mg/kg. Using the isobole method, comparisons of the observed and predicted effects assuming additivity on reproductive organ weights, hormone levels, and gene expression showed agreement and thus the combination effects are suggested to be additive in vivo as well as in vitro.
Long-term interactive effects of N addition with P and K availability on N status of Sphagnum.

PubMed

Chiwa, Masaaki; Sheppard, Lucy J; Leith, Ian D; Leeson, Sarah R; Tang, Y Sim; Neil Cape, J

2018-06-01

Little information exists concerning the long-term interactive effect of nitrogen (N) addition with phosphorus (P) and potassium (K) on Sphagnum N status. This study was conducted as part of a long-term N manipulation on Whim bog in south Scotland to evaluate the long-term alleviation effects of phosphorus (P) and potassium (K) on N saturation of Sphagnum (S. capillifolium). On this ombrotrophic peatland, where ambient deposition was 8 kg N ha -1 yr -1 , 56 kg N ha -1 yr -1 of either ammonium (NH 4 + , N red ) or nitrate (NO 3 - , N ox ) with and without P and K, were added over 11 years. Nutrient concentrations of Sphagnum stem and capitulum, and pore water quality of the Sphagnum layer were assessed. The N-saturated Sphagnum caused by long-term (11 years) and high doses (56 kg N ha -1 yr -1 ) of reduced N was not completely ameliorated by P and K addition; N concentrations in Sphagnum capitula for N red 56 PK were comparable with those for N red 56, although N concentrations in Sphagnum stems for N red 56 PK were lower than those for N red 56. While dissolved inorganic nitrogen (DIN) concentrations in pore water for N red 56 PK were not different from N red 56, they were lower for N ox 56 PK than for N ox 56 whose stage of N saturation had not advanced compared to N red 56. These results indicate that increasing P and K availability has only a limited amelioration effect on the N assimilation of Sphagnum at an advanced stage of N saturation. This study concluded that over the long-term P and K additions will not offset the N saturation of Sphagnum. Copyright © 2018 Elsevier Ltd. All rights reserved.
Al2O3 Nanoparticle Addition to Commercial Magnesium Alloys: Multiple Beneficial Effects

PubMed Central

Paramsothy, Muralidharan; Chan, Jimmy; Kwok, Richard; Gupta, Manoj

2012-01-01

The multiple beneficial effects of Al2O3 nanoparticle addition to cast magnesium based systems (followed by extrusion) were investigated, constituting either: (a) enhanced strength; or (b) simultaneously enhanced strength and ductility of the corresponding magnesium alloys. AZ31 and ZK60A nanocomposites containing Al2O3 nanoparticle reinforcement were each fabricated using solidification processing followed by hot extrusion. Compared to monolithic AZ31 (tension levels), the corresponding nanocomposite exhibited higher yield strength (0.2% tensile yield strength (TYS)), ultimate strength (UTS), failure strain and work of fracture (WOF) (+19%, +21%, +113% and +162%, respectively). Compared to monolithic AZ31 (compression levels), the corresponding nanocomposite exhibited higher yield strength (0.2% compressive yield strength (CYS)) and ultimate strength (UCS), lower failure strain and higher WOF (+5%, +5%, −4% and +11%, respectively). Compared to monolithic ZK60A (tension levels), the corresponding nanocomposite exhibited lower 0.2% TYS and higher UTS, failure strain and WOF (−4%, +13%, +170% and +200%, respectively). Compared to monolithic ZK60A (compression levels), the corresponding nanocomposite exhibited lower 0.2% CYS and higher UCS, failure strain and WOF (−10%, +7%, +15% and +26%, respectively). The capability of Al2O3 nanoparticles to enhance the properties of cast magnesium alloys in a way never seen before with micron length scale reinforcements is clearly demonstrated. PMID:28348301
Effects of Coating Materials and Mineral Additives on Nitrate Reduction by Zerovalent Iron

NASA Astrophysics Data System (ADS)

Kim, K. H.; Jeong, H. Y.; Lee, S.; Kang, N.; Choi, H. J.; Park, M.

2015-12-01

In efforts to facilitate nitrate removal, a variety of coating materials and mineral additives were assessed for their effects on the nitrate reduction by zerovalent iron (ZVI). Coated ZVIs were prepared by reacting Fe particles with Cr(III), Co(II), Ni(II), Cu(II), and S(-II) solutions under anoxic conditions, with the resultant materials named Cr/Fe, Co/Fe, Ni/Fe, Cu/Fe, and FeS/Fe, respectively. The mineral additives used, synthesized or purchased, included goethite, magnetite, and hydrous ferric oxide (HFO). Kinetic experiments were performed using air-tight serum vials containing 1.0 g Fe (uncoated or coated forms) in 15 mL of 100 mg NO3×N/L solutions with pH buffered at 7.0. To monitor the reaction progress, the solution phase was analyzed for NO3-, NO2-, and NH4+ on an ion chromatography, while the headspace was analyzed for H2, N2, and O2 on a gas chromatography. By uncoated Fe, ca. 60% of nitrate was reductively transformed for 3.6 h, with NH4+ being the predominant product. Compared with uncoated one, Cr/Fe, Co/Fe, and Cu/Fe showed faster removal rates of nitrate. The observed reactivity enhancement was thought to result from additional reduction of nitrate by H atoms adsorbed on the surface of Cr, Co, or Cu metal. In contrast, both Ni/Fe and FeS/Fe showed slower removal of nitrate than uncoated Fe. In both cases, the coating, which highly disfavors the adsorption of nitrate, would form on the Fe surface. When goethite, HFO, and magnetite were amended, the nitrate reduction by Fe was significantly increased, with the effect being most evident with HFO. Although not capable of reducing nitrate, the mineral additives would serve as crystal nuclei for the corrosion products of Fe, thus making the development of passivation layers on the Fe surface less. In the future, we will perform a kinetic modeling of the experimental data to assess the relative contribution of multiple reaction paths in the nitrate reduction by Fe.
Effect of Zn addition on bulk microstructure of lead-free solder SN100C

NASA Astrophysics Data System (ADS)

Nur Nadirah M., K.; Nurulakmal M., S.

2017-12-01

This paper reports the effect of adding Zn (0.5 wt% Zn, 1.0 wt% Zn) to the bulk microstructure and intermetallic compound (IMC) formation of commercial SN100C (Sn-0.7Cu-0.05Ni+Ge) lead-free solder alloy. Solder alloys were prepared by melting SN100C ingot and Zn shots, and subsequently casted into steel mold. Samples were ground and polished for XRF, and polished samples were then etched for microstructure analysis. Microstructure of bulk solder and the IMC were observed using SEM equipped with EDX. SEM result showed the addition of 0.5 wt% Zn resulted in increased grain size of β-Sn matrix but further addition of Zn (1 wt%) reduced the size of β-Sn dendrites in the bulk solder. Several intermetallic compounds (IMCs) were observed distributed in the Sn matrix; Cu-Zn, Ni-Zn and Cu-Zn-Ni IMC but in relatively small percentage compared to Cu-Zn and Ni-Zn. These particles could be considered as effective nucleating agent that led to finer β-Sn grains. It is expected that the finer β-Sn will contribute towards higher solder strength and the various IMCs present could act as suppressant for Sn diffusion which will then tend to reduce the IMC growth during thermal aging.
Analyzing partially missing confounder information in comparative effectiveness and safety research of therapeutics.

PubMed

Toh, Sengwee; García Rodríguez, Luis A; Hernán, Miguel A

2012-05-01

Electronic healthcare databases are commonly used in comparative effectiveness and safety research of therapeutics. Many databases now include additional confounder information in a subset of the study population through data linkage or data collection. We described and compared existing methods for analyzing such datasets. Using data from The Health Improvement Network and the relation between non-steroidal anti-inflammatory drugs and upper gastrointestinal bleeding as an example, we employed several methods to handle partially missing confounder information. The crude odds ratio (OR) of upper gastrointestinal bleeding was 1.50 (95% confidence interval: 0.98, 2.28) among selective cyclo-oxygenase-2 inhibitor initiators (n = 43 569) compared with traditional non-steroidal anti-inflammatory drug initiators (n = 411 616). The OR dropped to 0.81 (0.52, 1.27) upon adjustment for confounders recorded for all patients. When further considering three additional variables missing in 22% of the study population (smoking, alcohol consumption, body mass index), the OR was between 0.80 and 0.83 for the missing-category approach, the missing-indicator approach, single imputation by the most common category, multiple imputation by chained equations, and propensity score calibration. The OR was 0.65 (0.39, 1.09) and 0.67 (0.38, 1.16) for the unweighted and the inverse probability weighted complete-case analysis, respectively. Existing methods for handling partially missing confounder data require different assumptions and may produce different results. The unweighted complete-case analysis, the missing-category/indicator approach, and single imputation require often unrealistic assumptions and should be avoided. In this study, differences across methods were not substantial, likely due to relatively low proportion of missingness and weak confounding effect by the three additional variables upon adjustment for other variables. Copyright © 2012 John Wiley & Sons, Ltd.
Consequences of non-random species loss for decomposition dynamics: Experimental evidence for additive and non-additive effects

Treesearch

Becky A. Ball; Mark D. Hunter; John S. Kominoski; Christopher M. Swan; Mark A. Bradford

2008-01-01

Although litter decomposition is a fundamental ecological process, most of our understanding comes from studies of single-species decay. Recently, litter-mixing studies have tested whether monoculture data can be applied to mixed-litter systems. These studies have mainly attempted to detect non-additive effects of litter mixing, which address potential consequences of...
Anatomically ordered tapping interferes more with one-digit addition than two-digit addition: a dual-task fMRI study.

PubMed

Soylu, Firat; Newman, Sharlene D

2016-02-01

Fingers are used as canonical representations for numbers across cultures. In previous imaging studies, it was shown that arithmetic processing activates neural resources that are known to participate in finger movements. Additionally, in one dual-task study, it was shown that anatomically ordered finger tapping disrupts addition and subtraction more than multiplication, possibly due to a long-lasting effect of early finger counting experiences on the neural correlates and organization of addition and subtraction processes. How arithmetic task difficulty and tapping complexity affect the concurrent performance is still unclear. If early finger counting experiences have bearing on the neural correlates of arithmetic in adults, then one would expect anatomically and non-anatomically ordered tapping to have different interference effects, given that finger counting is usually anatomically ordered. To unravel these issues, we studied how (1) arithmetic task difficulty and (2) the complexity of the finger tapping sequence (anatomical vs. non-anatomical ordering) affect concurrent performance and use of key neural circuits using a mixed block/event-related dual-task fMRI design with adult participants. The results suggest that complexity of the tapping sequence modulates interference on addition, and that one-digit addition (fact retrieval), compared to two-digit addition (calculation), is more affected from anatomically ordered tapping. The region-of-interest analysis showed higher left angular gyrus BOLD response for one-digit compared to two-digit addition, and in no-tapping conditions than dual tapping conditions. The results support a specific association between addition fact retrieval and anatomically ordered finger movements in adults, possibly due to finger counting strategies that deploy anatomically ordered finger movements early in the development.
Additive Manufacturing: A Comparative Analysis of Dimensional Accuracy and Skin Texture Reproduction of Auricular Prostheses Replicas.

PubMed

Unkovskiy, Alexey; Spintzyk, Sebastian; Axmann, Detlef; Engel, Eva-Maria; Weber, Heiner; Huettig, Fabian

2017-11-10

The use of computer-aided design/computer-aided manufacturing (CAD/CAM) and additive manufacturing in maxillofacial prosthetics has been widely acknowledged. Rapid prototyping can be considered for manufacturing of auricular prostheses. Therefore, so-called prostheses replicas can be fabricated by digital means. The objective of this study was to identify a superior additive manufacturing method to fabricate auricular prosthesis replicas (APRs) within a digital workflow. Auricles of 23 healthy subjects (mean age of 37.8 years) were measured in vivo with respect to an anthropometrical protocol. Landmarks were volumized with fiducial balls for 3D scanning using a handheld structured light scanner. The 3D CAD dataset was postprocessed, and the same anthropometrical measurements were made in the CAD software with the digital lineal. Each CAD dataset was materialized using fused deposition modeling (FDM), selective laser sintering (SLS), and stereolithography (SL), constituting 53 APR samples. All distances between the landmarks were measured on the APRs. After the determination of the measurement error within the five data groups (in vivo, CAD, FDM, SLS, and SL), the mean values were compared using matched pairs method. To this, the in vivo and CAD dataset were set as references. Finally, the surface structure of the APRs was qualitatively evaluated with stereomicroscopy and profilometry to ascertain the level of skin detail reproduction. The anthropometrical approach showed drawbacks in measuring the protrusion of the ear's helix. The measurement error within all groups of measurements was calculated between 0.20 and 0.28 mm, implying a high reproducibility. The lowest mean differences of 53 produced APRs were found in FDM (0.43%) followed by SLS (0.54%) and SL (0.59%)--compared to in vivo, and again in FDM (0.20%) followed by SL (0.36%) and SLS (0.39%)--compared to CAD. None of these values exceed the threshold of clinical relevance (1.5%); however, the qualitative
Comparative study of imide-based Li salts as electrolyte additives for Li-ion batteries

NASA Astrophysics Data System (ADS)

Sharova, Varvara; Moretti, Arianna; Diemant, Thomas; Varzi, Alberto; Behm, R. Jürgen; Passerini, Stefano

2018-01-01

Herein, we report the results of a detailed study on the use of different Li imide salts (LiTFSI, LiFSI, and LiFTFSI) as electrolyte additives for lithium-ion batteries. The introduction of lithium imide salts in the electrolyte is shown to considerably improve the first cycle coulombic efficiency and the long-term cycling stability of graphite/LiFePO4 cells. Using LiTFSI, a capacity fading of only ∼2% occurred over 600 cycles while the control cell with the state-of-the-art additive (VC) lost ∼20% of the initial capacity at 20 °C. The results of the XPS and impedance spectroscopy measurements of graphite electrodes show that, after the formation cycle, the SEI obtained in the presence of imide salts is thinner, contains more LiF and is less resistive than that obtained using VC. Despite the beneficial effect of the imide salts on the lithium-ion cell performance, a slightly reduced thermal stability of the SEI is observed.
Additive effects of emotional content and spatial selective attention on electrocortical facilitation.

PubMed

Keil, Andreas; Moratti, Stephan; Sabatinelli, Dean; Bradley, Margaret M; Lang, Peter J

2005-08-01

Affectively arousing visual stimuli have been suggested to automatically attract attentional resources in order to optimize sensory processing. The present study crosses the factors of spatial selective attention and affective content, and examines the relationship between instructed (spatial) and automatic attention to affective stimuli. In addition to response times and error rate, electroencephalographic data from 129 electrodes were recorded during a covert spatial attention task. This task required silent counting of random-dot targets embedded in a 10 Hz flicker of colored pictures presented to both hemifields. Steady-state visual evoked potentials (ssVEPs) were obtained to determine amplitude and phase of electrocortical responses to pictures. An increase of ssVEP amplitude was observed as an additive function of spatial attention and emotional content. Statistical parametric mapping of this effect indicated occipito-temporal and parietal cortex activation contralateral to the attended visual hemifield in ssVEP amplitude modulation. This difference was most pronounced during selection of the left visual hemifield, at right temporal electrodes. In line with this finding, phase information revealed accelerated processing of aversive arousing, compared to affectively neutral pictures. The data suggest that affective stimulus properties modulate the spatiotemporal process along the ventral stream, encompassing amplitude amplification and timing changes of posterior and temporal cortex.
Relative Importance and Additive Effects of Maternal and Infant Risk Factors on Childhood Asthma

PubMed Central

Rosas-Salazar, Christian; James, Kristina; Escobar, Gabriel; Gebretsadik, Tebeb; Li, Sherian Xu; Carroll, Kecia N.; Walsh, Eileen; Mitchel, Edward; Das, Suman; Kumar, Rajesh; Yu, Chang; Dupont, William D.; Hartert, Tina V.

2016-01-01

Background Environmental exposures that occur in utero and during early life may contribute to the development of childhood asthma through alteration of the human microbiome. The objectives of this study were to estimate the cumulative effect and relative importance of environmental exposures on the risk of childhood asthma. Methods We conducted a population-based birth cohort study of mother-child dyads who were born between 1995 and 2003 and were continuously enrolled in the PRIMA (Prevention of RSV: Impact on Morbidity and Asthma) cohort. The individual and cumulative impact of maternal urinary tract infections (UTI) during pregnancy, maternal colonization with group B streptococcus (GBS), mode of delivery, infant antibiotic use, and older siblings at home, on the risk of childhood asthma were estimated using logistic regression. Dose-response effect on childhood asthma risk was assessed for continuous risk factors: number of maternal UTIs during pregnancy, courses of infant antibiotics, and number of older siblings at home. We further assessed and compared the relative importance of these exposures on the asthma risk. In a subgroup of children for whom maternal antibiotic use during pregnancy information was available, the effect of maternal antibiotic use on the risk of childhood asthma was estimated. Results Among 136,098 singleton birth infants, 13.29% developed asthma. In both univariate and adjusted analyses, maternal UTI during pregnancy (odds ratio [OR] 1.2, 95% confidence interval [CI] 1.18, 1.25; adjusted OR [AOR] 1.04, 95%CI 1.02, 1.07 for every additional UTI) and infant antibiotic use (OR 1.21, 95%CI 1.20, 1.22; AOR 1.16, 95%CI 1.15, 1.17 for every additional course) were associated with an increased risk of childhood asthma, while having older siblings at home (OR 0.92, 95%CI 0.91, 0.93; AOR 0.85, 95%CI 0.84, 0.87 for each additional sibling) was associated with a decreased risk of childhood asthma, in a dose-dependent manner. Compared with vaginal
Relative Importance and Additive Effects of Maternal and Infant Risk Factors on Childhood Asthma.

PubMed

Wu, Pingsheng; Feldman, Amy S; Rosas-Salazar, Christian; James, Kristina; Escobar, Gabriel; Gebretsadik, Tebeb; Li, Sherian Xu; Carroll, Kecia N; Walsh, Eileen; Mitchel, Edward; Das, Suman; Kumar, Rajesh; Yu, Chang; Dupont, William D; Hartert, Tina V

2016-01-01

Environmental exposures that occur in utero and during early life may contribute to the development of childhood asthma through alteration of the human microbiome. The objectives of this study were to estimate the cumulative effect and relative importance of environmental exposures on the risk of childhood asthma. We conducted a population-based birth cohort study of mother-child dyads who were born between 1995 and 2003 and were continuously enrolled in the PRIMA (Prevention of RSV: Impact on Morbidity and Asthma) cohort. The individual and cumulative impact of maternal urinary tract infections (UTI) during pregnancy, maternal colonization with group B streptococcus (GBS), mode of delivery, infant antibiotic use, and older siblings at home, on the risk of childhood asthma were estimated using logistic regression. Dose-response effect on childhood asthma risk was assessed for continuous risk factors: number of maternal UTIs during pregnancy, courses of infant antibiotics, and number of older siblings at home. We further assessed and compared the relative importance of these exposures on the asthma risk. In a subgroup of children for whom maternal antibiotic use during pregnancy information was available, the effect of maternal antibiotic use on the risk of childhood asthma was estimated. Among 136,098 singleton birth infants, 13.29% developed asthma. In both univariate and adjusted analyses, maternal UTI during pregnancy (odds ratio [OR] 1.2, 95% confidence interval [CI] 1.18, 1.25; adjusted OR [AOR] 1.04, 95%CI 1.02, 1.07 for every additional UTI) and infant antibiotic use (OR 1.21, 95%CI 1.20, 1.22; AOR 1.16, 95%CI 1.15, 1.17 for every additional course) were associated with an increased risk of childhood asthma, while having older siblings at home (OR 0.92, 95%CI 0.91, 0.93; AOR 0.85, 95%CI 0.84, 0.87 for each additional sibling) was associated with a decreased risk of childhood asthma, in a dose-dependent manner. Compared with vaginal delivery, C
Addition agents effects on hydrocarbon fuels burning

NASA Astrophysics Data System (ADS)

Larionov, V. M.; Mitrofanov, G. A.; Sakhovskii, A. V.

2016-01-01

Literature review on addition agents effects on hydrocarbon fuels burning has been conducted. The impact results in flame pattern and burning velocity change, energy efficiency increase, environmentally harmful NOx and CO emission reduction and damping of self-oscillations in flow. An assumption about water molecules dissociation phenomenon existing in a number of practical applications and being neglected in most explanations for physical- chemical processes taking place in case of injection of water/steam into combustion zone has been noted. The hypothesis about necessity of water dissociation account has been proposed. It can be useful for low temperature combustion process control and NOx emission reduction.
The effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn.

PubMed

Da Silva, T C; Smith, M L; Barnard, A M; Kung, L

2015-12-01

The objective of this experiment was to evaluate the effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn (HMC). Ground HMC (~63% dry matter) was untreated, or treated with an additive containing sodium benzoate, potassium sorbate, and sodium nitrite as active ingredients, at 0, 2, 3, or 4 L/t of fresh matter. Laboratory silos (7.5 L) were prepared and ensiled for 21 and 90d (4 silos/treatment per d of ensiling). Small bag silos were prepared for untreated HMC and HMC treated with 4 L/t of the additive and analyzed for nitrate-N and nitrite-N after 0, 3, and 7d of ensiling. The concentration of nitrate-N was similar between these 2 treatments and was below levels considered problematic for ruminants. Nitrite-N was greater in HMC treated with the high level of additive but was also very low for both treatments. Numbers of yeasts were similar among treatments in fresh HMC and decreased substantially after ensiling. Numbers of yeasts were similar among treatments after 21d of ensiling but after 90d they were lower in treated versus untreated HMC. Concentrations of organic acids (lactic, acetic, and propionic) and pH were not different among treatments at any time of ensiling. In contrast, treatment with the additive markedly decreased the concentration of ethanol in HMC after 21 and 90d when compared with untreated HMC. Treatment with all levels of the additive markedly improved the aerobic stability and improved the recovery of dry matter compared with untreated HMC. Overall, our findings suggest that the chemical additive used in this study has the potential to improve the fermentation and aerobic stability of HMC after a relatively short period (21d) and after a moderate length (90d) of ensiling. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
The effect of high concentration additive on chiral separations in supercritical fluid chromatography.

PubMed

Speybrouck, David; Doublet, Charline; Cardinael, Pascal; Fiol-Petit, Catherine; Corens, David

2017-08-11

Supercritical Fluid Chromatography is frequently used to efficiently handle separations of enantiomers. The separation of basic analytes usually requires the addition of a basic additive in the mobile phase to improve the peak shape or even to elute the compounds. The effect of increasing the concentration of 2-propylamine as additive on the elution of a series of basic compounds on a Chiralpak-AD stationary phase was studied. In this study, unusual additive concentrations ranging from 0.3% to 10% of 2-propylamine 2-propylaminein the modifier were explored and the effect on retention, peak shape, selectivity and resolution was evaluated. The addition of a large quantity of additive allowed to drastically improve the selectivity and the resolution, and even enantiomers elution order reversal was observed by changing the concentration of basic additive. The role of the ratio additive/modifier appeared a key to tune the enantioselectivity. Finally, the impact of these drastic conditions on the column material was evaluated. Copyright © 2017 Elsevier B.V. All rights reserved.
Environmental effect of antioxidant additives on exhaust emission reduction in compression ignition engine fuelled with Annona methyl ester.

PubMed

Senthil, R; Silambarasan, R

2015-01-01

The aim of the present study is to analyse the effect of antioxidant l-ascorbic acid on engine performance and emissions of a diesel engine fuelled with methyl ester of Annona oil (MEAO). The antioxidant is mixed in various concentrations (100-400 mg) with MEAO. Result shows that the antioxidant additive mixture (MEAO+LA200) is effective in control of nitrogen oxides (NOx) and hydrocarbon (HC) emission of MEAO-fuelled engine without doing any engine modification. In this study by using MEAO, the NOx emission is reduced by about 23.38% at full load while compared with neat diesel fuel. Likewise there is a reduction in carbon monoxide, smoke, and HC by about 48%, 28.57% and 29.71% at full load condition compared with neat diesel fuel.
Effects of Acarbose Addition on Ruminal Bacterial Microbiota, Lipopolysaccharide Levels and Fermentation Characteristics In vitro

PubMed Central

Yin, Yu-yang; Liu, Yu-jie; Zhu, Wei-yun; Mao, Sheng-yong

2014-01-01

This study investigated the effects of acarbose addition on changes in ruminal fermentation characteristics and the composition of the ruminal bacterial community in vitro using batch cultures. Rumen fluid was collected from the rumens of three cannulated Holstein cattle fed forage ad libitum that was supplemented with 6 kg of concentrate. The batch cultures consisted of 8 mL of strained rumen fluid in 40 mL of an anaerobic buffer containing 0.49 g of corn grain, 0.21 g of soybean meal, 0.15 g of alfalfa and 0.15g of Leymus chinensis. Acarbose was added to incubation bottles to achieve final concentrations of 0.1, 0.2, and 0.4 mg/mL. After incubation for 24 h, the addition of acarbose linearly decreased (p<0.05) the total gas production and the concentrations of acetate, propionate, butyrate, total volatile fatty acids, lactate and lipopolysaccharide (LPS). It also linearly increased (p<0.05) the ratio of acetate to propionate, the concentrations of isovalerate, valerate and ammonia-nitrogen and the pH value compared with the control. Pyrosequencing of the 16S rRNA gene showed that the addition of acarbose decreased (p<0.05) the proportion of Firmicutes and Proteobacteria and increased (p<0.05) the percentage of Bacteroidetes, Fibrobacteres, and Synergistetes compared with the control. A principal coordinates analysis plot based on unweighted UniFrac values and molecular variance analysis revealed that the structure of the ruminal bacterial communities in the control was different to that of the ruminal microbiota in the acarbose group. In conclusion, acarbose addition can affect the composition of the ruminal microbial community and may be potentially useful for preventing the occurrence of ruminal acidosis and the accumulation of LPS in the rumen. PMID:25358366
Towards understanding the effects of additives on the vermicomposting of sewage sludge.

PubMed

Xing, Meiyan; Lv, Baoyi; Zhao, Chunhui; Yang, Jian

2015-03-01

This work evaluated the effects of additives on the chemical properties of the final products (vermicompost) from vermicomposting of sewage sludge and the adaptable characteristics of Eisenia fetida during the process. An experimental design with different ratios of sewage sludge and the additives (cattle dung or pig manure) was conducted. The results showed that the vermicomposting reduced total organic carbon and the quotient of total organic carbon to total nitrogen (C/N ratio) of the initial mixtures and enhanced the stability and agronomical value of the final products. Notably, principal component analysis indicated that the additives had significant effects on the characteristics of the vermicomposts. Moreover, the vermibeds containing cattle dung displayed a better earthworm growth and reproduction than those with pig manure. Additionally, redundancy analysis demonstrated that electrical conductivity (EC), pH, and C/N ratio played crucial roles on earthworm growth and reproduction. In all, the additives with high C/N ratio, pH buffering capacity, and low EC are recommended to be used for vermicomposting of sewage sludge.

The effect of trace element addition to mono-digestion of grass silage at high organic loading rates.

PubMed

Wall, David M; Allen, Eoin; Straccialini, Barbara; O'Kiely, Padraig; Murphy, Jerry D

2014-11-01

This study investigated the effect of trace element addition to mono-digestion of grass silage at high organic loading rates. Two continuous reactors were compared. The first mono-digested grass silage whilst the second operated in co-digestion, 80% grass silage with 20% dairy slurry (VS basis). The reactors were run for 65weeks with a further 5weeks taken for trace element supplementation for the mono-digestion of grass silage. The co-digestion reactor reported a higher biomethane efficiency (1.01) than mono-digestion (0.90) at an OLR of 4.0kgVSm(-3)d(-1) prior to addition of trace elements. Addition of cobalt, iron and nickel, led to an increase in the SMY in mono-digestion of grass silage by 12% to 404LCH4kg(-1)VS and attained a biomethane efficiency of 1.01. Copyright © 2014 Elsevier Ltd. All rights reserved.
Additive effects of fibroblast growth factor 23 neutralization and dietary phytase on chick calcium and phosphorus metabolism.

PubMed

Ren, Z Z; Bütz, D E; Wahhab, A N; Piepenburg, A J; Cook, M E

2017-05-01

Phytase hydrolyzes phytate rendering phosphorus available for intestinal absorption, while systemic neutralization of fibroblast growth factor 23 (FGF-23), using anti-FGF-23 antibody, has been shown to increase phosphate retention. Hence, neutralization of FGF-23 should be additive with phytase in reducing dietary non-phytate phosphorus (nPP) needs in chickens fed plant-based diets rich in phytic acid. This study was designed to test the additive effects of maternally derived anti-FGF-23 antibody and dietary phytase on the performance of chicks fed a low nPP diet from one to 14 d. Single Comb White Leghorn laying hens were vaccinated with either an adjuvant control or a synthetic FGF-23 peptide (GMNPPPYS). Chicks from vaccinated hens with control or anti-FGF-23 maternal antibodies were fed either a diet containing 0.2% nPP and 0.9% calcium with or without 500 unit phytase per kg of diet (2 × 2 factorial with main effects of antibody type and phytase addition, n = 15 pens of chicks/treatment). A significant interaction between dietary phytase and maternally derived anti-FGF-23 antibody on growth and feed efficiency was observed (P ≤ 0.05), in which chicks receiving either phytase or maternally derived anti-FGF-23 antibody had improved body weight gain (21 or 15%, respectively) and feed efficiency (16 or 18%, respectively) as compared to chicks with control antibody and not fed phytase. Both phytase and maternally derived anti-FGF-23 antibody independently increased (P ≤ 0.05) plasma phosphate (11 and 11%, respectively) and percent tibiotarsus ash (13 and 11%, respectively). Significant main effects and the lack of an interaction supported an additive effect of phytase and anti-FGF-23 antibody on plasma phosphate and percent tibiotarsus ash. Feeding phytase to chicks fed 0.2% nPP increased plasma FGF-23 levels by 22% (P ≤ 0.05); however, no effects of anti-FGF-23 antibody on plasma FGF-23 levels were observed. In conclusion, dietary phytase and presence of
Dissection of additive, dominance, and imprinting effects for production and reproduction traits in Holstein cattle.

PubMed

Jiang, Jicai; Shen, Botong; O'Connell, Jeffrey R; VanRaden, Paul M; Cole, John B; Ma, Li

2017-05-30

Although genome-wide association and genomic selection studies have primarily focused on additive effects, dominance and imprinting effects play an important role in mammalian biology and development. The degree to which these non-additive genetic effects contribute to phenotypic variation and whether QTL acting in a non-additive manner can be detected in genetic association studies remain controversial. To empirically answer these questions, we analyzed a large cattle dataset that consisted of 42,701 genotyped Holstein cows with genotyped parents and phenotypic records for eight production and reproduction traits. SNP genotypes were phased in pedigree to determine the parent-of-origin of alleles, and a three-component GREML was applied to obtain variance decomposition for additive, dominance, and imprinting effects. The results showed a significant non-zero contribution from dominance to production traits but not to reproduction traits. Imprinting effects significantly contributed to both production and reproduction traits. Interestingly, imprinting effects contributed more to reproduction traits than to production traits. Using GWAS and imputation-based fine-mapping analyses, we identified and validated a dominance association signal with milk yield near RUNX2, a candidate gene that has been associated with milk production in mice. When adding non-additive effects into the prediction models, however, we observed little or no increase in prediction accuracy for the eight traits analyzed. Collectively, our results suggested that non-additive effects contributed a non-negligible amount (more for reproduction traits) to the total genetic variance of complex traits in cattle, and detection of QTLs with non-additive effect is possible in GWAS using a large dataset.
Experimental Investigations on the effect of Additive on the Tensile Properties of Fiber Glass Fabric Lamina

NASA Astrophysics Data System (ADS)

Nava Sai Divya, A.; Raghu Kumar, B., Dr; Lakshmi Narayana, G., Dr

2017-09-01

The main objective of this work is to investigate the effect of additives on tensile behaviour of fiber glass fabric at lamina level to explore an alternative skin material for the outer body of aerospace applications and machines. This experimental work investigates the effect of silica concentration in epoxy resin lapox L-12 on the tensile properties of glass fabric lamina of 4H-satin weave having 3.6 mm thickness. The lamina was prepared by using hand lay-up method and tests were conducted on it. Various tensile properties values obtained from experimentation were compared for four glass fiber lamina composites fabricated by adding the silica powder to resin bath. The effect of variations in silica concentration (0% SiO2, 5% SiO2, 10% SiO2 and 15% SiO2) on the tensile properties of prepared material revealed that maximum stiffness was obtained at 15% and yield strength at 10% SiO2 concentration in glass fiber lamina. Increasing the silica concentration beyond 10% had led to deterioration in the material properties. The experimentation that was carried out on test specimen was reasonably successful as the effect of silica powder as an additive in glass fiber lamina enhanced the mechanical properties up to certain limit. The underpinning microscopic behaviour at the source of these observations will be investigated in a follow up work.
An Investigation into the Comparative Costs of Additive Manufacture vs. Machine from Solid for Aero Engine Parts

DTIC Science & Technology

2006-05-01

welding power sources are not totally efficient at converting power drawn from the wall into heat energy used for the welding process . TIG sources are...Powder bed + Laser • Wire + Laser • Wire + Electron Beam • Wire + TIG Each system has its own unique attributes in terms of process variables...relative economics of producing a near net shape by Additive Manufacturing (AM) processes compared with traditional machine from solid processes (MFS
Investigating critical effects of variegated lubricants, glidants and hydrophilic additives on lag time of press coated ethylcellulose tablets.

PubMed

Patadia, Riddhish; Vora, Chintan; Mittal, Karan; Mashru, Rajashree

2016-01-01

The research envisaged focuses on vital impacts of variegated lubricants, glidants and hydrophilic additives on lag time of press coated ethylcellulose (EC) tablets using prednisone as a model drug. Several lubricants and glidants such as magnesium stearate, colloidal SiO2, sodium stearyl fumarate, talc, stearic acid, polyethylene glycol (6000) and glyceryl behenate were investigated to understand their effects on lag time by changing their concentrations in outer coat. Further, the effects of hydrophilic additives on lag time were examined for hydroxypropylmethylcellulose (E5), hydroxypropylcellulose (EF and SSL), povidone (K30), copovidone, polyethylene glycol (4000), lactose and mannitol. In vitro drug release testing revealed that each selected lubricant/glidant, if present even at concentration of 0.25% w/w, significantly reduced the lag time of press coated tablets. Specifically, colloidal SiO2 and/or magnesium stearate were detrimental while other lubricants/glidants were relatively less injurious. Among hydrophilic additives, freely water soluble fillers had utmost influence in lag time, whereas, comparatively less impact was observed with polymeric binders. Concisely, glidant and lubricant should be chosen to have minimal impact on lag time and further judicious selection of hydrophilic additives should be exercised for modulating lag time of pulsatile release formulations.
Cost-effectiveness of indwelling pleural catheter compared with talc in malignant pleural effusion.

PubMed

Olfert, Jordan A P; Penz, Erika D; Manns, Braden J; Mishra, Eleanor K; Davies, Helen E; Miller, Robert F; Luengo-Fernandez, Ramon; Gao, Song; Rahman, Najib M

2017-05-01

Malignant pleural effusion is associated with morbidity and mortality. A randomized controlled trial previously compared clinical outcomes and resource use with indwelling pleural catheter (IPC) and talc pleurodesis in this population. Using unpublished quality of life data, we estimate the cost-effectiveness of IPC compared with talc pleurodesis. Healthcare utilization and costs were captured during the trial. Utility weights produced by the EuroQol Group five-dimensional three-level questionnaire and survival were used to determine quality-adjusted life-years (QALYs) gained. The incremental cost-effectiveness ratio (ICER) was calculated over the 1-year trial period. Sensitivity analysis used patient survival data and modelled additional nursing time required per week for catheter drainage. Utility scores, cost and QALYs gained did not differ significantly between groups. The ICER for IPC compared with talc was favorable at $US10 870 per QALY gained. IPC was less costly with a probability exceeding 95% of being cost-effective when survival was <14 weeks, and was more costly when 2-h nursing time per week was assumed for catheter drainage. IPC is cost-effective when compared with talc, although substantial uncertainty exists around this estimate. IPC appears most cost-effective in patients with limited survival. If significant nursing time is required for catheter drainage, IPC becomes less likely to be cost-effective. Either therapy may be considered as a first-line option in treating malignant pleural effusion in patients without history of prior pleurodesis, with consideration for patient survival, support and preferences. © 2016 The Authors. Respirology published by John Wiley & Sons Australia, Ltd on behalf of Asian Pacific Society of Respirology.
The effect of aluminum additions on the oxidation resistance of U 3Si 2

DOE PAGES

Wood, E. Sooby; White, J. T.; Nelson, A. T.

2017-04-01

The effect of aluminum additions to U 3Si 2 is investigated in this paper as a means to improve the oxidation resistance of this nuclear fuel form. Four U-Si-Al compositions have been synthesized and characterized using scanning electron microscopy, energy dispersive spectroscopy, and x-ray diffraction. The onsets of breakaway oxidation are identified in air thermal ramp tests using thermogravimetric analysis. The final oxidation products following 1000° C air exposure are identified using x-ray diffraction and compared to those of UO 2 and U metal oxidized in the same manner. Finally, thermogravimetric data acquired in this study indicates that increasing amountsmore » of Al in U 3Si 2 further delays the onset of breakaway oxidation, providing enhanced oxidation resistance in air. Al 2O 3 formation on U 3Al 2Si 3 is observed following a heat treatment performed at 500° C in air, demonstrating the potential of Al additions to improve the oxidation resistance of U 3Si 2.« less
The effect of aluminum additions on the oxidation resistance of U 3Si 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, E. Sooby; White, J. T.; Nelson, A. T.

The effect of aluminum additions to U 3Si 2 is investigated in this paper as a means to improve the oxidation resistance of this nuclear fuel form. Four U-Si-Al compositions have been synthesized and characterized using scanning electron microscopy, energy dispersive spectroscopy, and x-ray diffraction. The onsets of breakaway oxidation are identified in air thermal ramp tests using thermogravimetric analysis. The final oxidation products following 1000° C air exposure are identified using x-ray diffraction and compared to those of UO 2 and U metal oxidized in the same manner. Finally, thermogravimetric data acquired in this study indicates that increasing amountsmore » of Al in U 3Si 2 further delays the onset of breakaway oxidation, providing enhanced oxidation resistance in air. Al 2O 3 formation on U 3Al 2Si 3 is observed following a heat treatment performed at 500° C in air, demonstrating the potential of Al additions to improve the oxidation resistance of U 3Si 2.« less
Cost-effectiveness analysis of a new 8% capsaicin patch compared to existing therapies for postherpetic neuralgia.

PubMed

Armstrong, Edward P; Malone, Daniel C; McCarberg, Bill; Panarites, Christopher J; Pham, Sissi V

2011-05-01

The purpose of this study was to compare the cost effectiveness of a new 8% capsaicin patch, compared to the current treatments for postherpetic neuralgia (PHN), including tricyclic antidepressants (TCAs), topical lidocaine patches, duloxetine, gabapentin, and pregabalin. A 1-year Markov model was constructed for PHN with monthly cycles, including dose titration and management of adverse events. The perspective of the analysis was from a payer perspective, managed-care organization. Clinical trials were used to determine the proportion of patients achieving at least a 30% improvement in PHN pain, the efficacy parameter. The outcome was cost per quality-adjusted life-year (QALY); second-order probabilistic sensitivity analyses were conducted. The effectiveness results indicated that 8% capsaicin patch and topical lidocaine patch were significantly more effective than the oral PHN products. TCAs were least costly and significantly less costly than duloxetine, pregabalin, topical lidocaine patch, 8% capsaicin patch, but not gabapentin. The incremental cost-effectiveness ratio for the 8% capsaicin patch overlapped with the topical lidocaine patch and was within the accepted threshold of cost per QALY gained compared to TCAs, duloxetine, gabapentin, and pregablin. The frequency of the 8% capsaicin patch retreatment assumption significantly impacts its cost-effectiveness results. There are several limitations to this analysis. Since no head-to-head studies were identified, this model used inputs from multiple clinical trials. Also, a last observation carried forward process was assumed to have continued for the duration of the model. Additionally, the trials with duloxetine may have over-predicted its efficacy in PHN. Although a 30% improvement in pain is often an endpoint in clinical trials, some patients may require greater or less improvement in pain to be considered a clinical success. The effectiveness results demonstrated that 8% capsaicin and topical lidocaine
Additive effect of mesenchymal stem cells and defibrotide in an arterial rat thrombosis model.

PubMed

Dilli, Dilek; Kılıç, Emine; Yumuşak, Nihat; Beken, Serdar; Uçkan Çetinkaya, Duygu; Karabulut, Ramazan; Zenciroğlu, Ayşegu L

2017-06-01

In this study, we aimed to investigate the additive effect of mesenchymal stem cells (MSC) and defibrotide (DFT) in a rat model of femoral arterial thrombosis. Thirty Sprague Dawley rats were included. An arterial thrombosis model by ferric chloride (FeCl3) was developed in the left femoral artery. The rats were equally assigned to 5 groups: Group 1-Sham-operated (without arterial injury); Group 2-Phosphate buffered saline (PBS) injected; Group 3-MSC; Group 4-DFT; Group 5-MSC + DFT. All had two intraperitoneal injections of 0.5 ml: the 1st injection was 4 h after the procedure and the 2nd one 48 h after the 1st injection. The rats were sacrificed 7 days after the 2nd injection. Although the use of human bone marrow-derived (hBM) hBM-MSC or DFT alone enabled partial resolution of the thrombus, combining them resulted in near-complete resolution. Neovascularization was two-fold better in hBM-MSC + DFT treated rats (11.6 ± 2.4 channels) compared with the hBM-MSC (3.8 ± 2.7 channels) and DFT groups (5.5 ± 1.8 channels) (P < 0.0001 and P= 0.002, respectively). The combined use of hBM-MSC and DFT in a rat model of arterial thrombosis showed additive effect resulting in near-complete resolution of the thrombus.
Study protocol for the dabigatran, apixaban, rivaroxaban, edoxaban, warfarin comparative effectiveness research study.

PubMed

Krumme, Alexis A; Pawar, Ajinkya; Schneeweiss, Sebastian; Glynn, Robert J; Choudhry, Niteesh K; Kulldorff, Martin; Ortiz, Adrian Santiago; Avorn, Jerome; Gagne, Joshua J

2018-01-01

Since 2010, four oral anticoagulants have been approved for marketing in addition to warfarin for treatment of thromboembolic disease. Limited head-to-head data exist comparing these treatments, leaving patients and clinicians with little guidance for selecting a strategy that balances recurrence reduction with bleeding risk. In the dabigatran, apixaban, rivaroxban, edoxaban and warfarin comparative effectiveness research study, we compare all five currently available oral anticoagulant agents for the extended treatment of deep venous thrombosis and pulmonary embolism, as well as no extended treatment, and evaluate whether results differ in specific sub-populations. As our population includes Medicare novel anticoagulant users and large numbers of commercially insured and Medicaid patients, our results will likely be transportable to the majority of US patients experiencing a DVT or pulmonary embolism. NCT03271450.
The effect of addition of modified guar gum to a low-energy semisolid meal on appetite and body weight loss.

PubMed

Kovacs, E M; Westerterp-Plantenga, M S; Saris, W H; Goossens, I; Geurten, P; Brouns, F

2001-03-01

To investigate the effect of addition of modified guar gum (GG) to a low-energy semisolid meal on appetite and body weight (BW) loss. Twenty eight mainly overweight male volunteers (age, 19-56 y; body mass index, 29+/-2 kg x m(-2); BW, 89.4+/-9.2 kg). Baseline of one week with self-selected diet. Three treatments of 2 weeks with a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without GG (SSM) or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, and a dinner of the subject's own choice. Washout periods lasted 4 weeks. Compared to baseline values, reduction in energy intake and BW loss were similar for SSM+, SSM and SM. Appetite (hunger, desire to eat or estimation of how much one could eat) was increased in SSM and in SM compared to baseline, but not in SSM+. Satiety and fullness in SSM+, SSM and SM were similar to baseline. Any intervention was more effective on BW loss when it took place the first time compared to the second and third times (2.6+/-0.2 kg, 1.7+/-0.2 kg and 1.1+/-0.2 kg, respectively; P<0.001). The SM-SSM+-SSM sequence was more effective on BW loss compared to the SSM+-SSM-SM sequence (5.6+/-1.0 and 2.5+/-0.6 kg, respectively; P<0.05). All the three treatments were equally effective with respect to BW loss. GG addition to a semisolid meal prevented an increase in appetite, hunger and desire to eat, which increase was present in the other treatments. However, differences between treatments were not statistically significant. The order effect shows that repeated 2-week bouts of dieting become increasingly ineffective. The sequence SM-SSM+-SSM was more effective than the sequence SSM+-SSM-SM, probably because compliance was relatively higher with the SSM+ or SSM diet, and compliance decreased towards the end of the complete experiment.
Additive effect of combined application of magnesium and MK-801 on analgesic action of morphine.

PubMed

Bujalska-Zadrożny, Magdalena; Duda, Kamila

2014-01-01

As previously reported, magnesium ions (Mg(2+)) administered in relatively low doses markedly potentiated opioid analgesia in neuropathic pain, in which the effectiveness of opioids is limited. Considering that Mg(2+) behaves like an N-methyl-D-aspartate receptor antagonist, the effect of this ion on the analgesic action of morphine was compared with that of MK-801. Acute pain was evoked by mechanical or thermal stimuli, whereas neuropathic hyperalgesia was induced by streptozotocin (STZ) administration. Magnesium sulphate (40 mg/kg i.p.) or MK-801 (0.05 mg/kg s.c.) administered alone did not modify the nociceptive threshold to acute stimuli or the streptozotocin hyperalgesia but significantly augmented the analgesic action of morphine (5 mg/kg i.p.). Furthermore, if these drugs (i.e. magnesium sulphate and MK-801) were applied concomitantly, a clear additive effect on the analgesic action of morphine occurred in both models of pain. Possible explanations of these observations are discussed. © 2014 S. Karger AG, Basel.
Effects of litter addition on ectomycorrhizal associates of a lodgepole pine (Pinus contorta) stand in Yellowstone National Park

NASA Technical Reports Server (NTRS)

Cullings, Kenneth W.; New, Michael H.; Makhija, Shilpa; Parker, V. Thomas

2003-01-01

Increasing soil nutrients through litter manipulation, pollution, or fertilization can adversely affect ectomycorrhizal (EM) communities by inhibiting fungal growth. In this study, we used molecular genetic methods to determine the effects of litter addition on the EM community of a Pinus contorta stand in Yellowstone National Park that regenerated after a stand-replacing fire. Two controls were used; in unmodified control plots nothing was added to the soil, and in perlite plots perlite, a chemically neutral substance, was added to maintain soil moisture and temperature at levels similar to those under litter. We found that (i) species richness did not change significantly following perlite addition (2.6 +/- 0.3 species/core in control plots, compared with 2.3 +/- 0.3 species/core in perlite plots) but decreased significantly (P < 0.05) following litter addition (1.8 +/- 0.3 species/core); (ii) EM infection was not affected by the addition of perlite but increased significantly (P < 0.001) in response to litter addition, and the increase occurred only in the upper soil layer, directly adjacent to the added litter; and (iii) Suillus granulatus, Wilcoxina mikolae, and agaricoid DD were the dominant organisms in controls, but the levels of W. mikolae and agaricoid DD decreased significantly in response to both perlite and litter addition. The relative levels of S. granulatus and a fourth fungus, Cortinariaceae species 2, increased significantly (P < 0.01 and P < 0.05, respectively) following litter addition. Thus, litter addition resulted in some negative effects that may be attributable to moisture-temperature relationships rather than to the increased nutrients associated with litter. Some species respond positively to litter addition, indicating that there are differences in their physiologies. Hence, changes in the EM community induced by litter accumulation also may affect ecosystem function.
Comparative Effects of Retinoic Acid or Glycolic Acid Vehiculated in Different Topical Formulations

PubMed Central

Maia Campos, Patrícia Maria Berardo Gonçalves; Gaspar, Lorena Rigo; Gonçalves, Gisele Mara Silva; Pereira, Lúcia Helena Terenciane Rodrigues; Semprini, Marisa; Lopes, Ruberval Armando

2015-01-01

Retinoids and hydroxy acids have been widely used due to their effects in the regulation of growth and in the differentiation of epithelial cells. However, besides their similar indication, they have different mechanisms of action and thus they may have different effects on the skin; in addition, since the topical formulation efficiency depends on vehicle characteristics, the ingredients of the formulation could alter their effects. Thus the objective of this study was to compare the effects of retinoic acid (RA) and glycolic acid (GA) treatment on the hairless mouse epidermis thickness and horny layer renewal when added in gel, gel cream, or cream formulations. For this, gel, gel cream, and cream formulations (with or without 6% GA or 0.05% RA) were applied in the dorsum of hairless mice, once a day for seven days. After that, the skin was analyzed by histopathologic, morphometric, and stereologic techniques. It was observed that the effects of RA occurred independently from the vehicle, while GA had better results when added in the gel cream and cream. Retinoic acid was more effective when compared to glycolic acid, mainly in the cell renewal and the exfoliation process because it decreased the horny layer thickness. PMID:25632398
A regulator's view of comparative effectiveness research.

PubMed

Temple, Robert

2012-02-01

'Comparative effectiveness' is the current enthusiasm, and for good reason. After knowing a treatment works, the most critical question is how it compares with alternatives. Comparative studies are not commonly conducted by drug companies and they represent a significant methodological challenge. Comparative data could include evidence of overall superiority to an alternative or advantages in identifiable subsets, for example, people who do not respond to or tolerate alternatives, or members of a genetic subset and could also include convincing evidence that there is little difference between two treatments. To describe regulations, guidance, and Food and Drug Administration experience related to studies of comparative effectiveness, including approaches to showing superiority and problems encountered in showing similarity. Review of Food and Drug Administration regulations and guidance and experience with showing superiority and similarity, particularly related to randomized trials and epidemiologic studies. Methods exist, and they have been successful for showing overall superiority of one drug over another, advantages in specific population subsets. Efforts to show true equivalence face problems of definition and very large sample sizes needed to rule out small differences. There is need for further discussion of what is meant by similarity or equivalence of two treatments. Comparative studies are challenging because differences between effective therapies are likely to be small and can be detected reliably only in randomized trials, often large ones. Despite the difficulties, comparative trials have been successful and we clearly would like to see more of them.
Effects of an electrolyte additive on hydration and drinking behavior during wildfire suppression.

PubMed

Cuddy, John S; Ham, Julie A; Harger, Stephanie G; Slivka, Dustin R; Ruby, Brent C

2008-01-01

The purpose of this study was to compare the effects of a water + electrolyte solution versus plain water on changes in drinking behaviors, hydration status, and body temperatures during wildfire suppression. Eight participants consumed plain water, and eight participants consumed water plus an electrolyte additive during 15 hours of wildfire suppression. Participants wore a specially outfitted backpack hydration system equipped with a digital flow meter system affixed inline to measure drinking characteristics (drinking frequency and volume). Body weight and urine-specific gravity were collected pre- and postshift. Ambient, core, and skin temperatures were measured continuously using a wireless system. Work output was monitored using accelerometry. There were no differences between groups for body weight, drinking frequency, temperature data, activity, or urine-specific gravity (1.019 +/- 0.007 to 1.023 +/- 0.010 vs. 1.019 +/- 0.005 to 1.024 +/- 0.009 for water and water + electrolyte groups pre- and postshift, respectively; P < .05). There was a main effect for time for body weight, demonstrating an overall decrease (78.1 +/- 13.3 and 77.3 +/- 13.3 kg pre- and postshift, respectively; P < .05) across the work shift. The water group consumed more total fluid (main effect for treatment) than the water + electrolyte group (504 +/- 472 vs. 285 +/- 279 mL.h(-1) for the water and water + electrolyte groups, respectively; P < .05). The addition of an electrolyte mixture to plain water decreased the overall fluid consumption of the water + electrolyte group by 220 mL.h(-1) (3.3 L.d(-1)). Supplementing water with electrolytes can reduce the amount of fluid necessary to consume and transport during extended activity. This can minimize carrying excessive weight, possibly reducing fatigue during extended exercise.
Effect of additives on isothermal crystallization kinetics and physical characteristics of coconut oil.

PubMed

Chaleepa, Kesarin; Szepes, Anikó; Ulrich, Joachim

2010-05-01

The effect of lauric acid and low-HLB sucrose esters (L-195, S170) on the isothermal crystallization of coconut oil was investigated by differential scanning calorimetry. The fundamental crystallization parameters, such as induction time of nucleation and crystallization rate, were obtained by using the Gompertz equation. The Gibb's free energy of nucleation was calculated via the Fisher-Turnbull equation based on the equilibrium melting temperature. All additives, investigated in this work, proved to have an inhibition effect on nucleation and crystallization kinetics of coconut oil. Our results revealed that the inhibition effect is related to the dissimilarity of the molecular characteristics between coconut oil and the additives. The equilibrium melting temperature (T(m) degrees ) of the coconut oil-additive mixtures estimated by the Hoffman-Weeks method was decreased with the addition of lauric acid and increased by using sucrose esters as additives. Micrographs showing simultaneous crystallization of coconut oil and lauric acid indicated that strong molecular interaction led to the increase in lamellar thickness resulting in the T(m) degrees depression of coconut oil. The addition of L-195 modified the crystal morphology of coconut oil into large, dense, non-porous crystals without altering the polymorphic occurrence of coconut oil. The enhancement in lamellar thickness and crystal perfection supported the T(m) degrees elevation of coconut oil. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.
The Effect of Polymer Additives on the Cavitation Threshold of Water

DTIC Science & Technology

1982-02-01

AeSTRACT (Continue an reverse side it necesary and fdmflo bp WeekB nimwot) The effect of the polymer additives Polyox and Guar Gum on the acousticI...and different concentrations of Polyox and Guar Gum at variousI dissolved oxygen concentrations, using an ultrasonic technique. In this study, poor...of the polymer additives Polyox and Guar Gum on the acoustic cavitation threshold of water was studied as a function of polymer concentration and

Mechanisms and modeling of the effects of additives on the nitrogen oxides emission

NASA Technical Reports Server (NTRS)

Kundu, Krishna P.; Nguyen, Hung Lee; Kang, M. Paul

1991-01-01

A theoretical study on the emission of the oxides of nitrogen in the combustion of hydrocarbons is presented. The current understanding of the mechanisms and the rate parameters for gas phase reactions were used to calculate the NO(x) emission. The possible effects of different chemical species on thermal NO(x), on a long time scale were discussed. The mixing of these additives at various stages of combustion were considered and NO(x) concentrations were calculated; effects of temperatures were also considered. The chemicals such as hydrocarbons, H2, CH3OH, NH3, and other nitrogen species were chosen as additives in this discussion. Results of these calculations can be used to evaluate the effects of these additives on the NO(x) emission in the industrial combustion system.
Whole-genome scan reveals significant non-additive effects for sire conception rate in Holstein cattle.

PubMed

Nicolini, Paula; Amorín, Rocío; Han, Yi; Peñagaricano, Francisco

2018-02-27

Service sire has a considerable impact on reproductive success in dairy cattle. Most gene mapping studies for bull fertility have focused on additive effects, while non-additive effects have been largely ignored. The main goal of this study was to assess the relevance of non-additive effects on Sire Conception Rate (SCR) in Holstein dairy cattle. The analysis included 7.5 k Holstein bulls with both SCR records and 57.8 k single nucleotide polymorphism (SNP) markers spanning the entire genome. The importance of non-additive effects was evaluated using an efficient two-step mixed model-based approach. Four genomic regions located on chromosomes BTA8, BTA9, BTA13 and BTA17 showed marked dominance and/or recessive effects. Most of these regions harbor genes, such as ADAM28, DNAJA1, TBC1D20, SPO11, PIWIL3 and TMEM119, that are directly implicated in testis development, male germ line maintenance, and sperm maturation. This study provides further evidence for the relevance of non-additive effects in fitness-related traits, such as male fertility. In addition, these findings may point out new strategies for improving service sire fertility in dairy cattle via marker-assisted selection.
Effect of Y addition on crystallization behavior and soft-magnetic properties of Fe78Si9B13 ribbons

NASA Astrophysics Data System (ADS)

Zhanwei, Liu; Dunbo, Yu; Kuoshe, Li; Yang, Luo; Chao, Yuan; Zilong, Wang; Liang, Sun; Kuo, Men

2017-08-01

A series of amorphous Fe-Si-B ribbons with various Y addition were prepared by melt-spinning. The effect of Y addition on crystallization behavior, thermal and magnetic properties was systematically investigated. With the increase of Y content, the initial crystallization temperature shifted to a higher temperature, indicating that the thermal stability of amorphous state in Fe-Si-B-Y ribbon is enhanced compared to that of Fe-Si-B alloy. Meanwhile, compared to the two exothermic peaks in the samples with lower Y content, a new exothermic peak was found in the ribbons with Y content higher than 1 at%, which corresponded to the decomposition of metastable Fe3B phase. Among all the alloys, Fe76.5Si9B13Y1.5 alloy exhibits optimized magnetic properties, with high saturation magnetization Ms of 187 emu/g and low coercivity HcJ of 7.6 A/m.
Effect of fibre additions to flatbread flour mixes on glucose kinetics: a randomised controlled trial.

PubMed

Boers, Hanny M; van Dijk, Theo H; Hiemstra, Harry; Hoogenraad, Anne-Roos; Mela, David J; Peters, Harry P F; Vonk, Roel J; Priebe, Marion G

2017-11-01

We previously found that guar gum (GG) and chickpea flour (CPF) added to flatbread wheat flour lowered postprandial blood glucose (PPG) and insulin responses dose dependently. However, rates of glucose influx cannot be determined from PPG, which integrates rates of influx, tissue disposal and hepatic glucose production. The objective was to quantify rates of glucose influx and related fluxes as contributors to changes in PPG with GG and CPF additions to wheat-based flatbreads. In a randomised cross-over design, twelve healthy males consumed each of three different 13C-enriched meals: control flatbreads (C), or C incorporating 15 % CPF with either 2 % (GG2) or 4 % (GG4) GG. A dual isotope technique was used to determine the time to reach 50 % absorption of exogenous glucose (T 50 %abs, primary objective), rate of appearance of exogenous glucose (RaE), rate of appearance of total glucose (RaT), endogenous glucose production (EGP) and rate of disappearance of total glucose (RdT). Additional exploratory outcomes included PPG, insulin, glucose-dependent insulinotropic peptide and glucagon-like peptide 1, which were additionally measured over 4 h. Compared with C, GG2 and GG4 had no significant effect on T 50 %abs. However, GG4 significantly reduced 4-h AUC values for RaE, RaT, RdT and EGP, by 11, 14, 14 and 64 %, respectively, whereas GG2 showed minor effects. Effect sizes over 2 and 4 h were similar except for significantly greater reduction in EGP for GG4 at 2 h. In conclusion, a soluble fibre mix added to flatbreads only slightly reduced rates of glucose influx, but more substantially affected rates of postprandial disposal and hepatic glucose production.
Dissection of additive, dominance, and imprinting effects for production and reproduction traits in Holstein cattle

USDA-ARS?s Scientific Manuscript database

Although genome-wide association and genomic selection studies have primarily focused on additive effects, dominance and imprinting effects play an important role in mammalian biology and development. The degree to which these non-additive genetic effects contribute to phenotypic variation and wheth...
Comparative study of the effects of bupropion and escitalopram on Internet gaming disorder.

PubMed

Song, Jinuk; Park, Jeong Ha; Han, Doug Hyun; Roh, Sungwon; Son, Ji Hyun; Choi, Tae Young; Lee, Hyuk; Kim, Tae Ho; Lee, Young Sik

2016-11-01

We compared the efficacy of bupropion and escitalopram treatments in Internet gaming disorder (IGD) patients. We recruited 119 adolescents and adults with IGD. We treated these participants for 6 weeks in three groups as follows: 44 participants were treated with bupropion SR (bupropion group), 42 participants were treated with escitalopram (escitalopram group), and 33 patients without any medication were observed in the community (observation group). At baseline and at the 6-week follow-up visit, all subjects were evaluated using the Clinical Global Impression-Severity Scale, the Young Internet Addiction Scale, the Beck Depression Inventory, the ADHD Rating Scale, and the Behavioral Inhibition and Activation Scales. Both the escitalopram group and the bupropion group showed improvement on all clinical symptom scales after 6 weeks of treatment compared to the observation group. Additionally, the bupropion group showed greater improvement on scores for the Clinical Global Impression-Severity Scale, the Young Internet Addiction Scale, the ADHD Rating Scale, and the Behavioral Inhibition Scale than the escitalopram group. Both bupropion and escitalopram were effective in treating and managing IGD symptoms. Moreover, bupropion appeared to be more effective than escitalopram in improving attention and impulsivity in IGD patients. In addition, attention and impulsivity seem to be important for the management of IGD. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.
Effect of the addition of antimicrobial agents on Shore A hardness and roughness of soft lining materials.

PubMed

Urban, Vanessa M; Lima, Thiago F; Bueno, Mirian G; Giannini, Marcelo; Arioli Filho, João N; de Almeida, Ana Lúcia P F; Neppelenbroek, Karin H

2015-04-01

While the incorporation of antimicrobial agents into soft denture liners has been suggested as a reliable alternative treatment for denture stomatitis, it may affect the liner's properties. The effect of addition of antimicrobial agents for the treatment of denture stomatitis on the surface roughness and Shore A hardness of soft lining materials was evaluated. The test groups comprised specimens (36 × 7 × 6 mm(3) ) of soft materials (Softone and Trusoft) without (control) or with incorporation of drugs (nystatin, miconazole, ketoconazole, chlorhexidine diacetate, and itraconazole). Hardness (Shore A) and roughness (Ra) were evaluated after immersion of specimens (n = 10) in distilled water at 37°C for 24 hours, 7 and 14 days. Data were analyzed by 3-way ANOVA/Tukey's test (α = 0.05). After 14 days, an increase (p < 0.05) was observed in the hardness of soft materials with time for the modified specimens, except for itraconazole. Addition of drugs increased the Softone roughness only for the addition of miconazole and chlorhexidine (p < 0.05), and did not increase the roughness of Trusoft with time. Only chlorhexidine and itraconazole altered the roughness compared to the control for each material (p < 0.05). The smallest changes of hardness and roughness with time in the modified groups compared to controls were observed for itraconazole groups for both materials. © 2014 by the American College of Prosthodontists.
Comparative effectiveness of fourth-line anti-hypertensive agents in resistant hypertension: A systematic review and meta-analysis.

PubMed

Sinnott, Sarah-Jo; Tomlinson, Laurie A; Root, Adrian A; Mathur, Rohini; Mansfield, Kathryn E; Smeeth, Liam; Douglas, Ian J

2017-02-01

Aim We assessed the effectiveness of fourth-line mineralocorticoid receptor antagonists in comparison with other fourth-line anti-hypertensive agents in resistant hypertension. Methods and results We systematically searched Medline, EMBASE and the Cochrane library from database inception until January 2016. We included randomised and non-randomised studies that compared mineralocorticoid receptor antagonists with other fourth-line anti-hypertensive agents in patients with resistant hypertension. The outcome was change in systolic blood pressure, measured in the office, at home or by ambulatory blood pressure monitoring. Secondary outcomes were changes in serum potassium and occurrence of hyperkalaemia. We used random effects models and assessed statistical heterogeneity using the I 2 test and corresponding 95% confidence intervals. From 2,506 records, 5 studies met our inclusion criteria with 755 included patients. Two studies were randomised and three were non-randomised. Comparative fourth-line agents included bisoprolol, doxazosin, furosemide and additional blockade of the renin angiotensin-aldosterone system. Using data from randomised studies, mineralocorticoid receptor antagonists reduced blood pressure by 7.4 mmHg (95%CI 3.2 - 11.6) more than the active comparator. When limited to non-randomised studies, mineralocorticoid receptor antagonists reduced blood pressure by 11.9 mmHg (95% CI 9.3 - 14.4) more than the active comparator. Conclusion On the basis of this meta-analysis, mineralocorticoid receptor antagonists reduce blood pressure more effectively than other fourth-line agents in resistant hypertension. Effectiveness stratified by ethnicity and comorbidities, in addition to information on clinical outcomes such as myocardial infarction and stroke, now needs to be determined.
Effect of calcium formate as an additive on desulfurization in power plants.

PubMed

Li, Zhenhua; Xie, Chunfang; Lv, Jing; Zhai, Ruiguo

2018-05-01

SO 2 in flue gas needs to be eliminated to alleviate air pollution. As the quality of coal decreases and environmental standard requirements become more stringent, the high-efficiency desulfurization of flue gas faces more and more challenges. As an economical and environmentally friendly solution, the effect of calcium formate as an additive on desulfurization efficiency in the wet flue gas desulfurization (WFGD) process was studied for the first time. Improvement of the desulfurization efficiency was achieved with limited change in pH after calcium formate was added into the reactor, and it was found to work better than other additives tested. The positive effects were further verified in a power plant, which showed that adding calcium formate could promote the dissolution of calcium carbonate, accelerate the growth of gypsum crystals and improve the efficiency of desulfurization. Thus, calcium formate was proved to be an effective additive and can potentially be used to reduce the amount of limestone slurry required, as well as the energy consumption and operating costs in industrial desulfurization. Copyright © 2017. Published by Elsevier B.V.
Additive effects of electronic and nuclear energy losses in irradiation-induced amorphization of zircon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zarkadoula, Eva; Toulemonde, Marcel; Weber, William J.

2015-12-28

We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. We found that taking the electronic energy loss out as a friction term results in reducedmore » damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.« less
In vitro additive antitumor effects of dimethoxycurcumin and 5-fluorouracil in colon cancer cells.

PubMed

Zhao, Huiying; Liu, Qingchun; Wang, Saisai; Dai, Fang; Cheng, Xiaofei; Cheng, Xiaobin; Chen, Wenbin; Zhang, Min; Chen, Dong

2017-07-01

Dimethoxycurcumin (DMC) is a lipophilic analog of curcumin, an effective treatment for colon cancer, which has greater chemical and metabolic stability. Chemotherapy treatments, such as 5-fluorouracil (5-Fu), play a key role in the current management of colon cancer. In this study, we investigated the antitumor efficacy of DMC in combination with 5-Fu in SW480 and SW620 colon cancer cells. CCK-8 assay was used to evaluate the inhibitory effect of DMC and 5-Fu on cancer cells proliferation, and the combination index was calculated. The influence of DMC and 5-Fu on cell cycle, apoptosis, reactive oxygen species (ROS) production, and mitochondrial membrane potential in SW480 and SW620 cells was determined using flow cytometry, and the related signaling pathways were detected by western blot. Transmission electron microscopy was used to observe endoplasmic reticulum expansion. DMC- and/or 5-Fu-induced apoptosis, stimulated G0/G1 phase arrest, increased ROS levels, decreased mitochondrial membrane potential, and enhanced endoplasmic reticulum expansion. The induction of apoptosis is involved in the increasing of Bax and cytochrome c and decreasing of Bcl2 expressions. Increased production of ROS was accompanied by upregulation of CHOP and Noxa. Combination therapy of DMC and 5-Fu had increased efficacy on the above pathways compared with either drug alone. Based on the calculated IC 50 , combination treatment with DMC and 5-Fu had an additive antitumor effect in both cell lines. Combined treatment with DMC and 5-Fu led to an additive antitumor effect in colon cancer cells that was related to apoptosis induction, G0/G1 phase arrest, increased ROS production, decreased mitochondrial membrane potential, and enhanced endoplasmic reticulum expansion. © 2017 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.
Health researcher views on comparative effectiveness research and research engagement.

PubMed

Forsythe, Laura P; Frank, Lori B; Workman, Thomas A; Borsky, Amanda; Hilliard, Tandrea; Harwell, Daniel; Fayish, Lauren

2017-05-01

To understand researcher capability for and interest in patient-centered comparative effectiveness research (PC-CER), particularly related to engaging with patients/caregivers. Web-based survey of 508 health researchers recruited via professional health research organizations. Most respondents (94%) were familiar with CER and many (69%) reported having previously conducting some form of CER. Most respondents were familiar with (81%) and interested in (87%) partnering with patients and/or caregivers in research. Resources to assist in training, coordination of partners, guidance in apply for funding and improved infrastructure were commonly cited factors that would help researchers conduct PC-CER. There is a significant opportunity for researchers to engage patients and caregivers as partners in CER. Researchers recognize the need for additional training and expertise to leverage those opportunities.
Methodological considerations in observational comparative effectiveness research for implantable medical devices: an epidemiologic perspective.

PubMed

Jalbert, Jessica J; Ritchey, Mary Elizabeth; Mi, Xiaojuan; Chen, Chih-Ying; Hammill, Bradley G; Curtis, Lesley H; Setoguchi, Soko

2014-11-01

Medical devices play a vital role in diagnosing, treating, and preventing diseases and are an integral part of the health-care system. Many devices, including implantable medical devices, enter the market through a regulatory pathway that was not designed to assure safety and effectiveness. Several recent studies and high-profile device recalls have demonstrated the need for well-designed, valid postmarketing studies of medical devices. Medical device epidemiology is a relatively new field compared with pharmacoepidemiology, which for decades has been developed to assess the safety and effectiveness of medications. Many methodological considerations in pharmacoepidemiology apply to medical device epidemiology. Fundamental differences in mechanisms of action and use and in how exposure data are captured mean that comparative effectiveness studies of medical devices often necessitate additional and different considerations. In this paper, we discuss some of the most salient issues encountered in conducting comparative effectiveness research on implantable devices. We discuss special methodological considerations regarding the use of data sources, exposure and outcome definitions, timing of exposure, and sources of bias. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
The effect of diamic acid additives on the dielectric constant of polyimides

NASA Technical Reports Server (NTRS)

Stoakley, Diane M.; St. Clair, Anne K.

1988-01-01

The effect of six selected diamic acids additives (including 2,2-prime bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride-aniline (An); 4,4-prime-oxydiphthalic anhydride-An, 3,3-prime diaminodiphenyl sulfone-phthalic anhydride (PA); 4,4-prime-oxydianiline-PA; 2,2-bis 4(4-aminophenoxy)phenyl hexafluoropropane-PA; and 2,2-bis 4(3-aminophenoxy)phenyl hexafluoropropane-PA) on the dielectric constants of low-dielectric-constant polyimide resins was evaluated. It was found that the effect of the incorporation of the diamic acids on reducing the dielectric constant of polyimides may be limited as the dielectric constant of the base resin itself becomes very low. The additives were found to lower the resin's values of glass transition temperature, with no effect on thermooxidative stability.
Effect of calcium chloride addition on ice cream structure and quality.

PubMed

Costa, F F; Resende, J V; Abreu, L R; Goff, H D

2008-06-01

The influence of calcium fortification by the addition of calcium chloride on quality parameters of ice cream based on physical properties was investigated, as was the effect of kappa-carrageenan at modifying the effects of this calcium fortification. Four ice cream mixes of conventional composition, with added kappa-carrageenan (0 or 0.025%) and added calcium chloride (0 or 4.4 g L(-1) = 40 mM of added Ca(2+)), were prepared. Modulated temperature-differential scanning calorimetry was used to investigate the effect of calcium chloride on the nucleation temperature, enthalpy of melting, and freezing point depression. The protein composition of 15.4% (wt/wt) reconstituted skim milk powder solutions with or without 4.4 g L(-1) added CaCl(2) and in the supernatant after ultracentrifugation was determined. Fat particle size distributions in ice cream were characterized by light scattering. Ice crystal sizes before and after temperature cycling were determined by cold-stage light microscopy. The results demonstrated that the addition of calcium chloride led to a substantial increase in ice crystal sizes and in fat partial coalescence, which were exacerbated by the addition of kappa-carrageenan. These results can be explained by the interaction between Ca(2+) ions and casein micelles, rather than any effects on freezing point depression. The calcium ions led to a more compact micelle, less serum beta-casein, and high fat destabilization, all of which would be expected to reduce macromolecular structure and volume occupancy in the unfrozen phase, which led to increased rates of ice recrystallization.
Aflatoxin effect on erythrocyte profile and histopathology of broilers given different additives

NASA Astrophysics Data System (ADS)

Karimy, M. F.; Sutrisno, B.; Agus, A.; Suryani, A. E.; Istiqomah, L.; Damayanti, E.

2017-12-01

The aim of this study was to evaluate erythrocyte profile and microscopic changes effect of AF induces by low level (57.18 ppb) and chronic exposure (34 days) with administration of additive (Lactobacillus plantarum G7 and methionine). Aflatoxin-contaminated corn was prepared by inoculate Aspergillus flavus FNCC 6002 on corn. Total number of 576 broiler Lohman strain (MB202) unsexed DOC were allocated completely randomized into four treatments and 12 replicates, with 12 broiler chicks each. The treatments as follows: T1 = aflatoxin-contaminated diet, T2 = aflatoxin-contaminated diet + 1% of LAB (w/w), T3 = aflatoxin-contaminated diet + 0.8% of methionine (w/w), and T4 = aflatoxin-contaminated diet + 1% of LAB + 0.8% of methionine (w/w). The effect of treatments was evaluated using ANOVA and the difference among mean treatments were analyzed using DMRT. The result showed that administration of additives had no significant effect (P>0.05) on erythrocyte profile, liver, and bursa of Fabricius. The dose of additive in each treatment (T2, T3, T4) were insufficient to reduce adverse effect of chronic aflatoxicosis. It was concluded that the LAB dose for binding AF (57.18%) should be evaluated and the dose for methionine should be reduced for chronic treatment of aflatoxicosis.
The Effect of Sr Modifier Additions on Double Oxide Film Defects in 2L99 Alloy Castings

NASA Astrophysics Data System (ADS)

Chen, Qi; Griffiths, W. D.

2017-11-01

In this paper, Sr modifier (300 ppm) was added to 2L99 alloy sand castings to investigate its effect on bifilm defects in the castings. Two different sand molds were used in this study, with good and bad running system designs, to introduce different amounts of bifilm defects into the castings. The mechanical properties of the modified 2L99 castings were compared to the properties of unmodified castings and showed that with high bifilm defect contents (H) the Sr addition reduced the Weibull modulus of the UTS by 67 pct and the Position Parameter by 5 pct, and introduced a bimodal distribution into the Weibull plot of the pct Elongation. However, for castings with low bifilm defect content (L), the Weibull moduli of both the UTS and pct Elongation were significantly improved (by 78 and 73 pct, respectively) with the addition of Sr. The Position Parameter of the pct Elongation was improved by 135 pct. The results suggested that a desirable modification effect can only be achieved while the bifilm defect content in a casting was low.
An evaluation of the effectiveness of a chemical additive based on sodium benzoate, potassium sorbate, and sodium nitrite on the fermentation and aerobic stability of corn silage.

PubMed

Kung, Limin; Smith, Megan L; Benjamim da Silva, Erica; Windle, Michelle C; da Silva, Thiago C; Polukis, Stephanie A

2018-04-11

We evaluated the effectiveness of an additive comprising sodium benzoate, potassium sorbate, and sodium nitrite (SSL) as active ingredients for its ability to improve the aerobic stability of corn silages made in North America. In experiment 1, treatment with SSL (1.5 and 2.0 L/t) on whole-plant corn (WPC) was compared with treatment with an additive containing buffered propionic acid and citric acid (BPA; 2 L/t) on corn harvested at 32 and 38% DM and ensiled for 120 d. Silage treated with BPA was higher in ammonia-N and propionic acid relative to other treatments. Treatments with all of the additives had numerically, but not statistically, fewer yeasts compared with untreated silage. Both application rates of SSL resulted in lower concentrations of ethanol compared with untreated and BPA silages. Treatment with BPA improved the aerobic stability of silages compared with untreated silage, but the effect from SSL was markedly greater. In experiment 2, WPC was untreated or treated with 2 or 3 L of SSL/t or a microbial inoculant containing Enterococcus faecium M74, Lactobacillus plantarum CH6072, and Lactobacillus buchneri LN1819 (final total lactic acid bacteria application rate of 150,000 cfu/g of fresh forage). Silages were air stressed for 24 h at 28 and 42 d of storage and ensiled for 49 d before opening. Inoculation had no effect on acid end products, ethanol, number of yeasts, or aerobic stability compared with other treatments. Treatment with SSL decreased the amount of ethanol, had no effect on number of yeasts, and improved aerobic stability in a dose-dependent manner compared with other treatments. In experiment 3, WPC was untreated or treated with 2 L of SSL/t and ensiled for 5, 15, and 30 d. Treatment with SSL resulted in silage with fewer yeasts and lower concentrations of ethanol after all times of ensiling compared with untreated silage. In addition, SSL improved aerobic stability after each period of ensiling, but the effect was more at 15 and 30 d
Aqueous solubility of diclofenac diethylamine in the presence of pharmaceutical additives: a comparative study with diclofenac sodium.

PubMed

Khalil, E; Najjar, S; Sallam, A

2000-04-01

Aqueous solubility of diclofenac diethylamine (DDEA), a nonsteroidal anti-inflammatory drug currently formulated as a topical emulgel, was studied in the presence of pharmaceutical additives and compared with diclofenac sodium (DS). Electrolytes at low concentrations exhibited a salting-in effect on DDEA with peak solubility that was attributed to the association of DDEA into micelles, followed by a salting-out effect at higher concentrations, by which structure formation by DDEA molecules increased and precipitation occurred. For DS, which is not capable of forming micelles, the salting-out effect was dominant due to the common ion effect. Cosolvents displayed significant enhancement in solubility of both salts except glycerol, which showed a slight increase in solubility of DDEA and a decrease in solubility of DS due to transformation into the less soluble hydrate form. Ethanol and polyethylene glycol (PEG) 400 cosolvent systems at all concentrations showed positive deviations from the log-linear solubility equation. In the case of propylene glycol (PG) cosolvent systems, negative deviations were observed at low volume fractions of cosolvent, while positive deviations were observed at high volume fractions of cosolvent for DS and DDEA. The parent drug, being less ionizable and highly nonpolar, showed negative deviations up to 90% PG content. Thus, the positive deviations for DS and DDEA could be attributed to the more ionizable carboxylic group and its higher ability for hydrogen bonding at higher fractions of cosolvent. Polyvinylpyrrolidone (PVP) and PEG4000 or PEG6000 enhanced the solubility of DS and DDEA, with PVP exerting higher solubilizing efficiency and DS showing better solubility than DDEA. Solubilities of DS in Tween 80 (T80) and Pluronic F-127 (PF127) aqueous solutions were almost similar, while the solubility of DDEA in the presence of T80 was higher than the solubility in the presence of PF127. DS appeared to be located more in the polyoxyethylene
What is the need for comparative effectiveness studies in IBD?

PubMed

Flasar, Mark H; Cross, Raymond K

2014-11-01

Unlike traditional clinical trial research, Comparative Effectiveness Research seeks to determine what is 'best' for a typical patient when deciding between effective options used in daily practice - a therapy, diagnostic test, or course of action. There is a clear need for Comparative Effectiveness Research in Inflammatory Bowel Disease, a point emphasized by the Institute of Medicine and supported by governmental agencies and escalating funding. This review highlights the rationale and support for Comparative Effectiveness Research, provides examples of Comparative Effectiveness Research in Inflammatory Bowel Disease, and outlines current and future focus for Comparative Effectiveness Research in Inflammatory Bowel Disease.

Non-additive and epistatic effects of HLA polymorphisms contributing to risk of adult glioma.

PubMed

Zhang, Chenan; de Smith, Adam J; Smirnov, Ivan V; Wiencke, John K; Wiemels, Joseph L; Witte, John S; Walsh, Kyle M

2017-11-01

Although genome-wide association studies have identified several susceptibility loci for adult glioma, little is known regarding the potential contribution of genetic variation in the human leukocyte antigen (HLA) region to glioma risk. HLA associations have been reported for various malignancies, with many studies investigating selected candidate HLA polymorphisms. However, no systematic analysis has been conducted in glioma patients, and no investigation into potential non-additive effects has been described. We conducted comprehensive genetic analyses of HLA variants among 1746 adult glioma patients and 2312 controls of European-ancestry from the GliomaScan Consortium. Genotype data were generated with the Illumina 660-Quad array, and we imputed HLA alleles using a reference panel of 5225 individuals in the Type 1 Diabetes Genetics Consortium who underwent high-resolution HLA typing via next-generation sequencing. Case-control comparisons were adjusted for population stratification using ancestry-informative principal components. Because alleles in different loci across the HLA region are linked, we created multigene haplotypes consisting of the genes DRB1, DQA1, and DQB1. Although none of the haplotypes were associated with glioma in additive models, inclusion of a dominance term significantly improved the model for multigene haplotype HLA-DRB1*1501-DQA1*0102-DQB1*0602 (P = 0.002). Heterozygous carriers of the haplotype had an increased risk of glioma [odds ratio (OR) 1.23; 95% confidence interval (CI) 1.01-1.49], while homozygous carriers were at decreased risk compared with non-carriers (OR 0.64; 95% CI 0.40-1.01). Our results suggest that the DRB1*1501-DQA1*0102-DQB1*0602 haplotype may contribute to the risk of glioma in a non-additive manner, with the positive dominance effect partly explained by an epistatic interaction with HLA-DRB1*0401-DQA1*0301-DQB1*0301.
The effect of amphipilic lignin derivatives addition on enzymatic hydrolysis performance of kraft pulp from sorghum bagasse

NASA Astrophysics Data System (ADS)

Fatriasari, Widya; Nugroho Adi, D. T.; Laksana, R. P. B.; Fajriutami, T.; Raniya, R.; Ghozali, M.; Hermiati, E.

2018-03-01

Previously, the chemical characteristics of isolated lignin from Acacia mangium black liquor of kraft pulping was characterized. This lignin was blended with natural rubber latex (NR-L) as adhesive in laminated wood. In addition, lignin has potency for biosurfactant materials by modification of the hydrophobic into hydrophilic properties. Therefore, this study was intended to develop lignin as material for amphipilic lignin derivatives (A-LD) biosurfactant by reacting lignin with epoxilated polyethylene glicol (PEG). A-LD addition in slurries was used to improve the enzymatic hydrolysis (EH) of kraft pulp sweet bagasse sorghum (SSB). The main observation in EH performance was to investigate the effect of lignin isolation method (one and two step) in A-LD and A-LD loading addition on reducing sugar yield (RSY) of SSB kraft pulp. The pulp was hydrolyzed at 50°C and 150 rpm for 72 h with 10 FPU cellulase loading in the shaking incubator. A-LD from one (L1S) and two step (L2S) lignin was added with A-LD loading of 0, 1, 2, 5, and 10% (b/v). The RSY of hydrolyzate has been observed after EH. A-LDs addition in EH of SSB kraft pulp enhanced RSY. L1S worked better in reaction performance with PEDGE compared to L2S and LS. A better performance was showed by PEDGE 500 than that of PEDGE 6000. Generally, the higher A-LDs loading resulted higher RSY. The highest RSY (81.33%) was resulted in addition of 10% A-LD L1S using PEDGE 500. A 5% A-LD loading was more considered to be added in EH because the RSY was comparable with 10% A-LD loading.
Cyclohexylamine additives for enhanced peptide separations in reversed phase liquid chromatography.

PubMed

Cole, S R; Dorsey, J G

1997-01-01

While the choice of stationary phase, organic modifier, and gradient strength can have significant effects on biomolecule separations, mobile phase additives can also have a significant effect on the chromatographic selectivity, recovery, efficiency and resolution. Given the importance of stationary phase coverage, the beneficial, silanol-masking properties of amines, and the potential for selectivity modification through ion-pair interactions, cyclohexylamine was examined as a mobile phase additive and compared with triethylamine and trifluoroacetic acid. Greatly improved separation was possible when cyclohexylamine was used as compared with phosphate buffer, and cyclohexylamine did not require purification before use, while triethylamine required distillation before 'clean' chromatograms were obtained.
Fine-mapping additive and dominant SNP effects using group-LASSO and Fractional Resample Model Averaging

PubMed Central

Sabourin, Jeremy; Nobel, Andrew B.; Valdar, William

2014-01-01

Genomewide association studies sometimes identify loci at which both the number and identities of the underlying causal variants are ambiguous. In such cases, statistical methods that model effects of multiple SNPs simultaneously can help disentangle the observed patterns of association and provide information about how those SNPs could be prioritized for follow-up studies. Current multi-SNP methods, however, tend to assume that SNP effects are well captured by additive genetics; yet when genetic dominance is present, this assumption translates to reduced power and faulty prioritizations. We describe a statistical procedure for prioritizing SNPs at GWAS loci that efficiently models both additive and dominance effects. Our method, LLARRMA-dawg, combines a group LASSO procedure for sparse modeling of multiple SNP effects with a resampling procedure based on fractional observation weights; it estimates for each SNP the robustness of association with the phenotype both to sampling variation and to competing explanations from other SNPs. In producing a SNP prioritization that best identifies underlying true signals, we show that: our method easily outperforms a single marker analysis; when additive-only signals are present, our joint model for additive and dominance is equivalent to or only slightly less powerful than modeling additive-only effects; and, when dominance signals are present, even in combination with substantial additive effects, our joint model is unequivocally more powerful than a model assuming additivity. We also describe how performance can be improved through calibrated randomized penalization, and discuss how dominance in ungenotyped SNPs can be incorporated through either heterozygote dosage or multiple imputation. PMID:25417853
Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement

PubMed Central

Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

2014-01-01

The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications. PMID:24920906
Effect of additive particles on mechanical, thermal, and cell functioning properties of poly(methyl methacrylate) cement.

PubMed

Khandaker, Morshed; Vaughan, Melville B; Morris, Tracy L; White, Jeremiah J; Meng, Zhaotong

2014-01-01

The most common bone cement material used clinically today for orthopedic surgery is poly(methyl methacrylate) (PMMA). Conventional PMMA bone cement has several mechanical, thermal, and biological disadvantages. To overcome these problems, researchers have investigated combinations of PMMA bone cement and several bioactive particles (micrometers to nanometers in size), such as magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica. A study comparing the effect of these individual additives on the mechanical, thermal, and cell functional properties of PMMA would be important to enable selection of suitable additives and design improved PMMA cement for orthopedic applications. Therefore, the goal of this study was to determine the effect of inclusion of magnesium oxide, hydroxyapatite, chitosan, barium sulfate, and silica additives in PMMA on the mechanical, thermal, and cell functional performance of PMMA. American Society for Testing and Materials standard three-point bend flexural and fracture tests were conducted to determine the flexural strength, flexural modulus, and fracture toughness of the different PMMA samples. A custom-made temperature measurement system was used to determine maximum curing temperature and the time needed for each PMMA sample to reach its maximum curing temperature. Osteoblast adhesion and proliferation experiments were performed to determine cell viability using the different PMMA cements. We found that flexural strength and fracture toughness were significantly greater for PMMA specimens that incorporated silica than for the other specimens. All additives prolonged the time taken to reach maximum curing temperature and significantly improved cell adhesion of the PMMA samples. The results of this study could be useful for improving the union of implant-PMMA or bone-PMMA interfaces by incorporating nanoparticles into PMMA cement for orthopedic and orthodontic applications.
Lack of Additive Effects of Resveratrol and Energy Restriction in the Treatment of Hepatic Steatosis in Rats

PubMed Central

Aguirre, Leixuri; Rolo, Anabela P.; Palmeira, Carlos M.; Portillo, María P.

2017-01-01

The aims of the present study were to analyze the effect of resveratrol on liver steatosis in obese rats, to compare the effects induced by resveratrol and energy restriction and to research potential additive effects. Rats were initially fed a high-fat high-sucrose diet for six weeks and then allocated in four experimental groups fed a standard diet: a control group, a resveratrol-treated group, an energy restricted group and a group submitted to energy restriction and treated with resveratrol. We measured liver triacylglycerols, transaminases, FAS, MTP, CPT1a, CS, COX, SDH and ATP synthase activities, FATP2/FATP5, DGAT2, PPARα, SIRT1, UCP2 protein expressions, ACC and AMPK phosphorylation and PGC1α deacetylation. Resveratrol reduced triacylglycerols compared with the controls, although this reduction was lower than that induced by energy restriction. The mechanisms of action were different. Both decreased protein expression of fatty acid transporters, thus suggesting reduced fatty acid uptake from blood stream and liver triacylglycerol delivery, but only energy restriction reduced the assembly. These results show that resveratrol is useful for liver steatosis treatment within a balanced diet, although its effectiveness is lower than that of energy restriction. However, resveratrol is unable to increase the reduction in triacylglycerol content induced by energy restriction. PMID:28696376
Lack of Additive Effects of Resveratrol and Energy Restriction in the Treatment of Hepatic Steatosis in Rats.

PubMed

Milton-Laskibar, Iñaki; Aguirre, Leixuri; Fernández-Quintela, Alfredo; Rolo, Anabela P; Soeiro Teodoro, João; Palmeira, Carlos M; Portillo, María P

2017-07-11

The aims of the present study were to analyze the effect of resveratrol on liver steatosis in obese rats, to compare the effects induced by resveratrol and energy restriction and to research potential additive effects. Rats were initially fed a high-fat high-sucrose diet for six weeks and then allocated in four experimental groups fed a standard diet: a control group, a resveratrol-treated group, an energy restricted group and a group submitted to energy restriction and treated with resveratrol. We measured liver triacylglycerols, transaminases, FAS, MTP, CPT1a, CS, COX, SDH and ATP synthase activities, FATP2/FATP5, DGAT2, PPARα, SIRT1, UCP2 protein expressions, ACC and AMPK phosphorylation and PGC1α deacetylation. Resveratrol reduced triacylglycerols compared with the controls, although this reduction was lower than that induced by energy restriction. The mechanisms of action were different. Both decreased protein expression of fatty acid transporters, thus suggesting reduced fatty acid uptake from blood stream and liver triacylglycerol delivery, but only energy restriction reduced the assembly. These results show that resveratrol is useful for liver steatosis treatment within a balanced diet, although its effectiveness is lower than that of energy restriction. However, resveratrol is unable to increase the reduction in triacylglycerol content induced by energy restriction.
Combined Treatment of Xenon and Hypothermia in Newborn Rats - Additive or Synergistic Effect?

PubMed Central

Sabir, Hemmen; Walløe, Lars; Dingley, John; Smit, Elisa; Liu, Xun; Thoresen, Marianne

2014-01-01

Background Breathing the inert gas Xenon (Xe) enhances hypothermic (HT) neuroprotection after hypoxia-ischemia (HI) in small and large newborn animal models. The underlying mechanism of the enhancement is not yet fully understood, but the combined effect of Xe and HT could either be synergistic (larger than the two effects added) or simply additive. A previously published study, using unilateral carotid ligation followed by hypoxia in seven day old (P7) rats, showed that the combination of mild HT (35°C) and low Xe concentration (20%), both not being neuroprotective alone, had a synergistic effect and was neuroprotective when both were started with a 4 h delay after a moderate HI insult. To examine whether another laboratory could confirm this finding, we repeated key aspects of the study. Design/Methods After the HI-insult 120 pups were exposed to different post-insult treatments: three temperatures (normothermia (NT) NT37°C, HT35°C, HT32°C) or Xe concentrations (0%, 20% or 50%) starting either immediately or with a 4 h delay. To assess the synergistic potency of Xe-HT, a second set (n = 101) of P7 pups were exposed to either HT35°C+Xe0%, NT+Xe20% or a combination of HT35°C+Xe20% starting with a 4 h delay after the insult. Brain damage was analyzed using relative hemispheric (ligated side/unligated side) brain tissue area loss after seven day survival. Results Immediate HT32°C (p = 0.042), but not HT35°C significantly reduced brain injury compared to NT37°C. As previously shown, adding immediate Xe50% to HT32°C increased protection. Neither 4 h-delayed Xe20%, nor Xe50% at 37°C significantly reduced brain injury (p>0.050). In addition, neither 4 h-delayed HT35°C alone, nor HT35°C+Xe20% reduced brain injury. We found no synergistic effect of the combined treatments in this experimental model. Conclusions Combining two treatments that individually were ineffective (delayed HT35°C and delayed Xe20%) did not exert neuroprotection when combined
Effectiveness of mifamurtide in addition to standard chemotherapy for high-grade osteosarcoma: a systematic review.

PubMed

Jimmy, Rincy; Stern, Cindy; Lisy, Karolina; White, Sarahlouise

2017-08-01

Osteosarcoma mostly occurs during the period of rapid bone growth in children and adolescents as high-grade osteosarcomas. Current treatment recommended for high-grade non-metastatic and metastatic and/or relapsed osteosarcoma involves neoadjuvant multiagent conventional chemotherapy, followed by surgical resection of macroscopically detected tumor and postoperative adjuvant chemotherapy. However, residual micrometastatic deposits that develop following surgery have shown resistance to postoperative/adjuvant chemotherapy. Therefore, there is a critical need for more effective and innovative therapeutic approaches such as immune stimulatory agents. The most extensively studied immune stimulatory agent in the treatment of osteosarcoma is mifamurtide. The aim of this systematic review was to identify and synthesize the evidence on the effectiveness of mifamurtide in addition to standard chemotherapy on survival outcomes. To present the best available evidence on the treatment of high-grade non-metastatic and metastatic osteosarcoma with mifamurtide in addition to standard chemotherapy. All populations of patients regardless of age, gender or ethnicity with high-grade, resectable, non-metastatic and metastatic osteosarcoma based on histological diagnosis. This review focused on intravenous infusion of either of the pharmaceutical formulations of mifamurtide (MTP-PE or L-MTP-PE) in addition to standard chemotherapy, and the comparator was chemotherapy alone. This review considered any experimental study design including randomized controlled trials, non-randomized trials and quasi-experimental studies. The primary outcomes of interest were event-free survival, overall survival and recurrence of osteosarcoma. Secondary outcomes that were considered included health-related quality of life and any mifamurtide-related adverse events. A search for published and unpublished literature in English was undertaken (seven published literature databases, four unpublished literature
A framework for understanding cancer comparative effectiveness research data needs.

PubMed

Carpenter, William R; Meyer, Anne-Marie; Abernethy, Amy P; Stürmer, Til; Kosorok, Michael R

2012-11-01

Randomized controlled trials remain the gold standard for evaluating cancer intervention efficacy. Randomized trials are not always feasible, practical, or timely and often don't adequately reflect patient heterogeneity and real-world clinical practice. Comparative effectiveness research can leverage secondary data to help fill knowledge gaps randomized trials leave unaddressed; however, comparative effectiveness research also faces shortcomings. The goal of this project was to develop a new model and inform an evolving framework articulating cancer comparative effectiveness research data needs. We examined prevalent models and conducted semi-structured discussions with 76 clinicians and comparative effectiveness research researchers affiliated with the Agency for Healthcare Research and Quality's cancer comparative effectiveness research programs. A new model was iteratively developed and presents cancer comparative effectiveness research and important measures in a patient-centered, longitudinal chronic care model better reflecting contemporary cancer care in the context of the cancer care continuum, rather than a single-episode, acute-care perspective. Immediately relevant for federally funded comparative effectiveness research programs, the model informs an evolving framework articulating cancer comparative effectiveness research data needs, including evolutionary enhancements to registries and epidemiologic research data systems. We discuss elements of contemporary clinical practice, methodology improvements, and related needs affecting comparative effectiveness research's ability to yield findings clinicians, policy makers, and stakeholders can confidently act on. Copyright © 2012 Elsevier Inc. All rights reserved.
A framework for understanding cancer comparative effectiveness research data needs

PubMed Central

Carpenter, William R; Meyer, Anne-Marie; Abernethy, Amy P.; Stürmer, Til; Kosorok, Michael R.

2012-01-01

Objective Randomized controlled trials remain the gold standard for evaluating cancer intervention efficacy. Randomized trials are not always feasible, practical, or timely, and often don’t adequately reflect patient heterogeneity and real-world clinical practice. Comparative effectiveness research can leverage secondary data to help fill knowledge gaps randomized trials leave unaddressed; however, comparative effectiveness research also faces shortcomings. The goal of this project was to develop a new model and inform an evolving framework articulating cancer comparative effectiveness research data needs. Study Design and Setting We examined prevalent models and conducted semi-structured discussions with 76 clinicians and comparative effectiveness research researchers affiliated with the Agency for Healthcare Research and Quality’s cancer comparative effectiveness research programs. Results A new model was iteratively developed, and presents cancer comparative effectiveness research and important measures in a patient-centered, longitudinal chronic care model better-reflecting contemporary cancer care in the context of the cancer care continuum, rather than a single-episode, acute-care perspective. Conclusion Immediately relevant for federally-funded comparative effectiveness research programs, the model informs an evolving framework articulating cancer comparative effectiveness research data needs, including evolutionary enhancements to registries and epidemiologic research data systems. We discuss elements of contemporary clinical practice, methodology improvements, and related needs affecting comparative effectiveness research’s ability to yield findings clinicians, policymakers, and stakeholders can confidently act on. PMID:23017633
Effect of flax addition on the flavor profile and acceptability of bagels.

PubMed

Aliani, Michel; Ryland, Donna; Pierce, Grant N

2012-01-01

Bakery products containing flaxseed, a rich source of alpha linolenic acid (ALA), may provide health benefits. However, the effect of adding flaxseed, especially in the high amounts required for use as the food supplement in clinical trials (23% by weight of the raw ingredients), may affect the flavor characteristics and consumer acceptability. Sensory attributes of bagels containing 30 g of milled flaxseed were evaluated by a 9 member trained panel using a descriptive test and by 89 participants using a consumer test. Grain/flax aroma and flavor were significantly higher for the flax bagels compared to the nonflax bagels. The cinnamon raisin bagel had significantly lower grain/flax aroma and flavor and significantly higher sweet aroma and taste compared to the plain and sunflower sesame types. Older consumers rated the appearance, color, and flavor of the bagels significantly higher than the younger consumers possibly leading to higher compliance in clinical studies for this age group. Bagels with flax showed a significantly lower mean value for flavor acceptability, overall acceptability, and frequency of eating compared to bagels without flax. Appearance, color, and texture acceptability showed no significant differences. The cinnamon raisin bagel had significantly higher flavor acceptance compared to sunflower sesame and plain bagels. In conclusion, for bagels containing 6 g ALA in the form of milled flaxseed, cinnamon raisin appears to be a promising flavoring alternative for ALA fortification for use in clinical trials or as part of the daily diet. Consumers are seeking functional foods that contain omega-3 fatty acids. Bagels made with 23% milled flaxseed (approximately 2 times the amount in regular flax baked products) provided 6 g ALA, an amount high enough to test the efficacy of ALA in human subjects without causing gastrointestinal distress. This study showed that flaxseed aroma and flavor were detected in fortified compared to nonfortified bagels but
Inhaled Diesel Emissions Generated with Cerium Oxide Nanoparticle Fuel Additive Induce Adverse Pulmonary and Systemic Effects

PubMed Central

Snow, Samantha J.; McGee, John; Miller, Desinia B.; Bass, Virginia; Schladweiler, Mette C.; Thomas, Ronald F.; Krantz, Todd; King, Charly; Ledbetter, Allen D.; Richards, Judy; Weinstein, Jason P.; Conner, Teri; Willis, Robert; Linak, William P.; Nash, David; Wood, Charles E.; Elmore, Susan A.; Morrison, James P.; Johnson, Crystal L.; Gilmour, Matthew Ian; Kodavanti, Urmila P.

2014-01-01

Diesel exhaust (DE) exposure induces adverse cardiopulmonary effects. Cerium oxide nanoparticles added to diesel fuel (DECe) increases fuel burning efficiency but leads to altered emission characteristics and potentially altered health effects. Here, we evaluated whether DECe results in greater adverse pulmonary effects compared with DE. Male Sprague Dawley rats were exposed to filtered air, DE, or DECe for 5 h/day for 2 days. N-acetyl glucosaminidase activity was increased in bronchial alveolar lavage fluid (BALF) of rats exposed to DECe but not DE. There were also marginal but insignificant increases in several other lung injury biomarkers in both exposure groups (DECe > DE for all). To further characterize DECe toxicity, rats in a second study were exposed to filtered air or DECe for 5 h/day for 2 days or 4 weeks. Tissue analysis indicated a concentration- and time-dependent accumulation of lung and liver cerium followed by a delayed clearance. The gas-phase and high concentration of DECe increased lung inflammation at the 2-day time point, indicating that gas-phase components, in addition to particles, contribute to pulmonary toxicity. This effect was reduced at 4 weeks except for a sustained increase in BALF γ-glutamyl transferase activity. Histopathology and transmission electron microscopy revealed increased alveolar septa thickness due to edema and increased numbers of pigmented macrophages after DECe exposure. Collectively, these findings indicate that DECe induces more adverse pulmonary effects on a mass basis than DE. In addition, lung accumulation of cerium, systemic translocation to the liver, and delayed clearance are added concerns to existing health effects of DECe. PMID:25239632
Effect of Additives on Green Sand Molding Properties using Design of Experiments and Taguchi's Quality Loss Function - An Experimental Study

NASA Astrophysics Data System (ADS)

Desai, Bhagyashree; Mokashi, Pavani; Anand, R. L.; Burli, S. B.; Khandal, S. V.

2016-09-01

The experimental study aims to underseek the effect of various additives on the green sand molding properties as a particular combination of additives could yield desired sand properties. The input parameters (factors) selected were water and powder (Fly ash, Coconut shell and Tamarind) in three levels. Experiments were planned using design of experiments (DOE). On the basis of plans, experiments were conducted to understand the behavior of sand mould properties such as compression strength, shear strength, permeability number with various additives. From the experimental results it could be concluded that the factors have significant effect on the sand properties as P-value found to be less than 0.05 for all the cases studied. The optimization based on quality loss function was also performed. The study revealed that the quality loss associated with the tamarind powder was lesser compared to other additives selected for the study. The optimization based on quality loss function and the parametric analysis using ANOVA suggested that the tamarind powder of 8 gm per Kg of molding sand and moisture content of 7% yield better properties to obtain sound castings.
Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials.

PubMed

Gorgin Karaji, Zahra; Hedayati, Reza; Pouran, Behdad; Apachitei, Iulian; Zadpoor, Amir A

2017-07-01

Metallic porous biomaterials are recently attracting more attention thanks to the additive manufacturing techniques which help produce more complex structures as compared to conventional techniques. On the other hand, bio-functional surfaces on metallic biomaterials such as titanium and its alloys are necessary to enhance the biological interactions with the host tissue. This study discusses the effect of plasma electrolytic oxidation (PEO), as a surface modification technique to produce bio-functional layers, on the mechanical properties of additively manufactured Ti6Al4V scaffolds based on the cubic unit cell. For this purpose, the PEO process with two different oxidation times was applied on scaffolds with four different values of relative density. The effects of the PEO process were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), optical microscopy as well as static and dynamic (fatigue) mechanical testing under compression. SEM results indicated pore formation on the surface of the scaffolds after oxidation with a thickness of 4.85±0.36μm of the oxide layer after 2min and 9.04±2.27μm after 5min oxidation (based on optical images). The static test results showed the high effect of relative density of porous structure on its mechanical properties. However, oxidation did not influence most of the mechanical properties such as maximum stress, yield stress, plateau stress, and energy absorption, although its effect on the elastic modulus was considerable. Under fatigue loading, none of the scaffolds failed even after 10 6 loading cycles at 70% of their yield stress. Copyright © 2017 Elsevier B.V. All rights reserved.
Additive antithrombotic effect of ASP6537, a selective cyclooxygenase (COX)-1 inhibitor, in combination with clopidogrel in guinea pigs.

PubMed

Sakata, Chinatsu; Suzuki, Ken-Ichi; Morita, Yoshiaki; Kawasaki, Tomihisa

2017-03-05

Clopidogrel (Plavix ® , Sanofi-Aventis), the adenosine diphosphate P2Y 12 receptor antagonist, is reported to be effective in the prevention of cardiovascular events and is often used in combination with aspirin, particularly in high-risk patients. ASP6537 is a reversible cyclooxygenase (COX)-1 inhibitor that is under investigation as an anti-platelet agent. First, we investigated the reversibility of the antiplatelet effect of ASP6537 and its interaction with ibuprofen to compare the usability of ASP6537 with that of aspirin. We then evaluated the antithrombotic effect of ASP6537 in combination with clopidogrel using a FeCl 3 -induced thrombosis model in guinea pigs. ASP6537 exerted reversible antiplatelet activity, and no pharmacodynamic interaction with ibuprofen was noted. When administered as monotherapy, ASP6537 exerted a significant antithrombotic effect at ≥3mg/kg, while aspirin inhibited thrombosis at 100mg/kg. ASP6537 exerted significant additive effects in combination with clopidogrel, and the minimum antithrombotic dose was reduced by concomitant administration of clopidogrel. Our study showed that ASP6537 did not interact with ibuprofen and has clear additive effects in combination with clopidogrel. ASP6537 may therefore represent a promising antiplatelet agent for use in clinical settings in combination with clopidogrel. Copyright © 2017 Elsevier B.V. All rights reserved.
Casein SNP in Norwegian goats: additive and dominance effects on milk composition and quality

PubMed Central

2011-01-01

Background The four casein proteins in goat milk are encoded by four closely linked casein loci (CSN1S1, CSN2, CSN1S2 and CSN3) within 250 kb on caprine chromosome 6. A deletion in exon 12 of CSN1S1, so far reported only in Norwegian goats, has been found at high frequency (0.73). Such a high frequency is difficult to explain because the national breeding goal selects against the variant's effect. Methods In this study, 575 goats were genotyped for 38 Single Nucleotide Polymorphisms (SNP) located within the four casein genes. Milk production records of these goats were obtained from the Norwegian Dairy Goat Control. Test-day mixed models with additive and dominance fixed effects of single SNP were fitted in a model including polygenic effects. Results Significant additive effects of single SNP within CSN1S1 and CSN3 were found for fat % and protein %, milk yield and milk taste. The allele with the deletion showed additive and dominance effects on protein % and fat %, and overdominance effects on milk quantity (kg) and lactose %. At its current frequency, the observed dominance (overdominance) effects of the deletion allele reduced its substitution effect (and additive genetic variance available for selection) in the population substantially. Conclusions The selection pressure of conventional breeding on the allele with the deletion is limited due to the observed dominance (overdominance) effects. Inclusion of molecular information in the national breeding scheme will reduce the frequency of this deletion in the population. PMID:21864407
Augmenting Phase Space Quantization to Introduce Additional Physical Effects

NASA Astrophysics Data System (ADS)

Robbins, Matthew P. G.

Quantum mechanics can be done using classical phase space functions and a star product. The state of the system is described by a quasi-probability distribution. A classical system can be quantized in phase space in different ways with different quasi-probability distributions and star products. A transition differential operator relates different phase space quantizations. The objective of this thesis is to introduce additional physical effects into the process of quantization by using the transition operator. As prototypical examples, we first look at the coarse-graining of the Wigner function and the damped simple harmonic oscillator. By generalizing the transition operator and star product to also be functions of the position and momentum, we show that additional physical features beyond damping and coarse-graining can be introduced into a quantum system, including the generalized uncertainty principle of quantum gravity phenomenology, driving forces, and decoherence.
Comparative effectiveness and cost-effectiveness of the implantable miniature telescope.

PubMed

Brown, Gary C; Brown, Melissa M; Lieske, Heidi B; Lieske, Philip A; Brown, Kathryn S; Lane, Stephen S

2011-09-01

To assess the preference-based comparative effectiveness (human value gain) and the cost-utility (cost-effectiveness) of a telescope prosthesis (implantable miniature telescope) for the treatment of end-stage, age-related macular degeneration (AMD). A value-based medicine, second-eye model, cost-utility analysis was performed to quantify the comparative effectiveness and cost-effectiveness of therapy with the telescope prosthesis. Published, evidence-based data from the IMT002 Study Group clinical trial. Ophthalmic utilities were obtained from a validated cohort of >1000 patients with ocular diseases. Comparative effectiveness data were converted from visual acuity to utility (value-based) format. The incremental costs (Medicare) of therapy versus no therapy were integrated with the value gain conferred by the telescope prosthesis to assess its average cost-utility. The incremental value gains and incremental costs of therapy referent to (1) a fellow eye cohort and (2) a fellow eye cohort of those who underwent intra-study cataract surgery were integrated in incremental cost-utility analyses. All value outcomes and costs were discounted at a 3% annual rate, as per the Panel on Cost-Effectiveness in Health and Medicine. Comparative effectiveness was quantified using the (1) quality-adjusted life-year (QALY) gain and (2) percent human value gain (improvement in quality of life). The QALY gain was integrated with incremental costs into the cost-utility ratio ($/QALY, or US dollars expended per QALY gained). The mean, discounted QALY gain associated with use of the telescope prosthesis over 12 years was 0.7577. When the QALY loss of 0.0004 attributable to the adverse events was factored into the model, the final QALY gain was 0.7573. This resulted in a 12.5% quality of life gain for the average patient during the 12 years of the model. The average cost-utility versus no therapy for use of the telescope prosthesis was $14389/QALY. The incremental cost-utility referent

Ionic Liquid as an Effective Additive for Rechargeable Magnesium Batteries

DOE PAGES

Pan, Baofei; Lau, Ka -Cheong; Vaughey, John T.; ...

2017-03-02

Here, the effect of the addition of an ionic liquid DEME•TFSI to an electrolyte solution of Mg(HMDS) 2-MgCl 2 in THF was studied electrochemically and spectroscopically. Reversible magnesium deposition/dissolution was achieved with the DEME•TFSI-modified electrolyte. This electrolyte shows higher ionic conductivity, and a linear relationship was observed between the ionic conductivity and the concentration of DEME•TFSI in THF solution of Mg(HMDS) 2-MgCl 2. Mg-Mo 6S 8 coin cells have also been successfully cycled using Mg(HMDS) 2-MgCl 2 electrolyte with the addition of DEME•TFSI. Raman and NMR spectroscopy suggest that DEME•TFSI facilitates magnesium deposition/dissolution by improving ionic conductivity of the electrolyte.
Effects of Ce additions on the age hardening response of Mg–Zn alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langelier, Brian, E-mail: langelb@mcmaster.ca; Esmaeili, Shahrzad

2015-03-15

The effects of Ce additions on the precipitation hardening behaviour of Mg–Zn are examined for a series of alloys, with Ce additions at both alloying and microalloying levels. The alloys are artificially aged, and studied using hardness measurement and X-ray diffraction, as well as optical and transmission electron microscopy. It is found that the age-hardening effect is driven by the formation of fine precipitates, the number density of which is related to the Zn content of the alloy. Conversely, the Ce content is found to slightly reduce hardening. When the alloy content of Ce is high, large secondary phase particlesmore » containing both Ce and Zn are present, and remain stable during solutionizing. These particles effectively reduce the amount of Zn available as solute for precipitation, and thereby reduce hardening. Combining hardness results with thermodynamic analysis of alloy solute levels also suggests that Ce can have a negative effect on hardening when present as solutes at the onset of ageing. This effect is confirmed by designing a pre-ageing heat treatment to preferentially remove Ce solutes, which is found to restore the hardening capability of an Mg–Zn–Ce alloy to the level of the Ce-free alloy. - Highlights: • The effects of Ce additions on precipitation in Mg–Zn alloys are examined. • Additions of Ce to Mg–Zn slightly reduce the age-hardening response. • Ce-rich secondary phase particles deplete the matrix of Zn solute. • Hardening is also decreased when Ce is present in solution. • Pre-ageing to preferentially precipitate out Ce restores hardening capabilities.« less
Cost-effectiveness of cardiotocography plus ST analysis of the fetal electrocardiogram compared with cardiotocography only.

PubMed

Vijgen, Sylvia M C; Westerhuis, Michelle E M H; Opmeer, Brent C; Visser, Gerard H A; Moons, Karl G M; Porath, Martina M; Oei, Guid S; Van Geijn, Herman P; Bolte, Antoinette C; Willekes, Christine; Nijhuis, Jan G; Van Beek, Erik; Graziosi, Giuseppe C M; Schuitemaker, Nico W E; Van Lith, Jan M M; Van Den Akker, Eline S A; Drogtrop, Addy P; Van Dessel, Hendrikus J H M; Rijnders, Robbert J P; Oosterbaan, Herman P; Mol, Ben Willem J; Kwee, Anneke

2011-07-01

To assess the cost-effectiveness of addition of ST analysis of the fetal electrocardiogram (ECG; STAN) to cardiotocography (CTG) for fetal surveillance during labor compared with CTG only. Cost-effectiveness analysis based on a randomized clinical trial on ST analysis of the fetal ECG. Obstetric departments of three academic and six general hospitals in The Netherlands. Population. Laboring women with a singleton high-risk pregnancy, a fetus in cephalic presentation, a gestational age >36 weeks and an indication for internal electronic fetal monitoring. A trial-based cost-effectiveness analysis was performed from a health-care provider perspective. Primary health outcome was the incidence of metabolic acidosis measured in the umbilical artery. Direct medical costs were estimated from start of labor to childbirth. Cost-effectiveness was expressed as costs to prevent one case of metabolic acidosis. The incidence of metabolic acidosis was 0.7% in the ST-analysis group and 1.0% in the CTG-only group (relative risk 0.70; 95% confidence interval 0.38-1.28). Per delivery, the mean costs per patient of CTG plus ST analysis (n= 2 827) were €1,345 vs. €1,316 for CTG only (n= 2 840), with a mean difference of €29 (95% confidence interval -€9 to €77) until childbirth. The incremental costs of ST analysis to prevent one case of metabolic acidosis were €9 667. The additional costs of monitoring by ST analysis of the fetal ECG are very limited when compared with monitoring by CTG only and very low compared with the total costs of delivery. © 2011 The Authors Acta Obstetricia et Gynecologica Scandinavica© 2011 Nordic Federation of Societies of Obstetrics and Gynecology.
The Incremental Effects of Manual Therapy or Booster Sessions in Addition to Exercise Therapy for Knee Osteoarthritis: A Randomized Clinical Trial.

PubMed

Abbott, J Haxby; Chapple, Catherine M; Fitzgerald, G Kelley; Fritz, Julie M; Childs, John D; Harcombe, Helen; Stout, Kirsten

2015-12-01

A factorial randomized controlled trial. To investigate the addition of manual therapy to exercise therapy for the reduction of pain and increase of physical function in people with knee osteoarthritis (OA), and whether "booster sessions" compared to consecutive sessions may improve outcomes. The benefits of providing manual therapy in addition to exercise therapy, or of distributing treatment sessions over time using periodic booster sessions, in people with knee OA are not well established. All participants had knee OA and were provided 12 sessions of multimodal exercise therapy supervised by a physical therapist. Participants were randomly allocated to 1 of 4 groups: exercise therapy in consecutive sessions, exercise therapy distributed over a year using booster sessions, exercise therapy plus manual therapy without booster sessions, and exercise therapy plus manual therapy with booster sessions. The primary outcome measure was the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC score; 0-240 scale) at 1-year follow-up. Secondary outcome measures were the numeric pain-rating scale and physical performance tests. Of 75 participants recruited, 66 (88%) were retained at 1-year follow-up. Factorial analysis of covariance of the main effects showed significant benefit from booster sessions (P = .009) and manual therapy (P = .023) over exercise therapy alone. Group analysis showed that exercise therapy with booster sessions (WOMAC score, -46.0 points; 95% confidence interval [CI]: -80.0, -12.0) and exercise therapy plus manual therapy (WOMAC score, -37.5 points; 95% CI: -69.7, -5.5) had superior effects compared with exercise therapy alone. The combined strategy of exercise therapy plus manual therapy with booster sessions was not superior to exercise therapy alone. Distributing 12 sessions of exercise therapy over a year in the form of booster sessions was more effective than providing 12 consecutive exercise therapy sessions. Providing manual
Additive effects of electronic and nuclear energy loss in irradiation-induced amorphization of zircon

DOE PAGES

Zarkadoula, Eva; Toulemonde, Marcel; Weber, William J.

2015-12-29

We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. As a result, we found that taking the electronic energy loss out as a frictionmore » term results in reduced damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.« less
The effect of slag addition on strength development of Class C fly ash geopolymer concrete at normal temperature

NASA Astrophysics Data System (ADS)

Wardhono, Arie; Law, David W.; Sutikno, Dani, Hasan

2017-09-01

This paper presents the effect of slag addition on strength development and workability of fly ash/slag based geopolymer (FASLG) concrete cured at normal temperature. Class C fly ash with high ferrite (Fe) content was used as the primary material. The proportions of fly ash (FA) to slag (SL) are: 1 FA : 0 SL, 0.9 FA : 0.1 SL, 0.7 FA : 0.3 SL, and 0.5 FA : 0.5 SL. The workability and strength properties were determined by slump, vikat, and compressive strength tests. The result shows that the highest compressive strength was achieved by FASLG-3 concrete with 30% slag addition and exhibited a comparable strength to that normal concrete at 28 days. The 30% slag addition also improve the workability and increase the setting time of FASLG concrete specimens. It can be concluded that the slag inclusion on fly ash will improve the performance of geopolymer concrete at normal temperature.
Measurement in Comparative Effectiveness Research

PubMed Central

Chubak, Jessica; Rutter, Carolyn M.; Kamineni, Aruna; Johnson, Eric A.; Stout, Natasha K.; Weiss, Noel S.; Doria-Rose, V. Paul; Doubeni, Chyke A.; Buist, Diana S.M.

2013-01-01

Comparative effectiveness research (CER) on preventive services can shape policy and help patients, their providers, and public health practitioners select regimens and programs for disease prevention. Patients and providers need information about the relative effectiveness of various regimens they may choose. Decision makers need information about the relative effectiveness of various programs to offer or recommend. The goal of this paper is to define and differentiate measures of relative effectiveness of regimens and programs for disease prevention. Cancer screening is used to demonstrate how these measures differ in an example of two hypothetic screening regimens and programs. Conceptually and algebraically defined measures of relative regimen and program effectiveness are also presented. The measures evaluate preventive services that range from individual tests through organized, population-wide prevention programs. Examples illustrate how effective screening regimens may not result in effective screening programs and how measures can vary across subgroups and settings. Both regimen and program relative effectiveness measures assess benefits of prevention services in real-world settings, but each addresses different scientific and policy questions. As the body of CER grows, a common lexicon for various measures of relative effectiveness becomes increasingly important to facilitate communication and shared understanding among researchers, healthcare providers, patients, and policymakers. PMID:23597816
Measurement in comparative effectiveness research.

PubMed

Chubak, Jessica; Rutter, Carolyn M; Kamineni, Aruna; Johnson, Eric A; Stout, Natasha K; Weiss, Noel S; Doria-Rose, V Paul; Doubeni, Chyke A; Buist, Diana S M

2013-05-01

Comparative effectiveness research (CER) on preventive services can shape policy and help patients, their providers, and public health practitioners select regimens and programs for disease prevention. Patients and providers need information about the relative effectiveness of various regimens they may choose. Decision makers need information about the relative effectiveness of various programs to offer or recommend. The goal of this paper is to define and differentiate measures of relative effectiveness of regimens and programs for disease prevention. Cancer screening is used to demonstrate how these measures differ in an example of two hypothetical screening regimens and programs. Conceptually and algebraically defined measures of relative regimen and program effectiveness also are presented. The measures evaluate preventive services that range from individual tests through organized, population-wide prevention programs. Examples illustrate how effective screening regimens may not result in effective screening programs and how measures can vary across subgroups and settings. Both regimen and program relative effectiveness measures assess benefits of prevention services in real-world settings, but each addresses different scientific and policy questions. As the body of CER grows, a common lexicon for various measures of relative effectiveness becomes increasingly important to facilitate communication and shared understanding among researchers, healthcare providers, patients, and policymakers. Copyright © 2013 American Journal of Preventive Medicine. All rights reserved.
Additive Effects on Si3n4 Oxidation/Volatilization in Water Vapor

NASA Technical Reports Server (NTRS)

Opila, Elizabeth J.; Robinson, R. Craig; Fox, Dennis S.; Wenglarz, Richard A.; Ferber, Mattison K.

2002-01-01

Two commercially available additive-containing silicon nitride materials were exposed in four environments which range in severity from dry oxygen at 1 atm pressure, and low gas velocity to an actual turbine engine. Oxidation and volatilization kinetics were monitored at temperatures ranging from 1066 to 1400 C. The main purpose of this paper is to examine the surface oxide morphology resulting from the exposures. It was found that the material surface was enriched in rare earth silicate phases in combustion environments when compared to the oxides formed on materials exposed in dry oxygen. However, the in situ formation of rare earth disilicate phases offered little additional protection from the volatilization of silica observed in combustion environments. It was concluded that externally applied environmental barrier coatings are needed to protect additive-containing silicon nitride materials from volatilization reactions in combustion environments. Introduction Si3N4 is proposed for use as components, such as vanes, in turbine applications. Tens of thousands of hours of life are needed for both land-based turbines and aeropropulsion applications. Additive-containing SisN4 materials are
Effect of Al Addition on Microstructure of AZ91D

NASA Astrophysics Data System (ADS)

Joshi, Utsavi; Babu, Nadendla Hari

Casting is a net shape or near net shape forming process so work-hardening will not be applicable for improving properties of magnesium cast alloys. Grain refinement, solid-solution strengthening, precipitation hardening and specially designed heat treatment are the techniques used to enhance the properties of these alloys. This research focusses on grain refinement of magnesium alloy AZ91D, which is a widely used commercial cast alloy. Recently, Al-B based master alloys have shown potential in grain refining AZ91D. A comparative study of the grain refinement of AZ91D by addition of 0.02wt%B, 0.04wt%B, 0.1wt%B, 0.5wt%B and 1.0wt%B of A1-5B master alloy and equivalent amount of solute element aluminium is described in this paper. Hardness profile of AZ91D alloyed with boron and aluminium is compared.
Does the model of additive effect in placebo research still hold true? A narrative review

PubMed Central

Berger, Bettina; Weger, Ulrich; Heusser, Peter

2017-01-01

Personalised and contextualised care has been turned into a major demand by people involved in healthcare suggesting to move toward person-centred medicine. The assessment of person-centred medicine can be most effectively achieved if treatments are investigated using ‘with versus without’ person-centredness or integrative study designs. However, this assumes that the components of an integrative or person-centred intervention have an additive relationship to produce the total effect. Beecher’s model of additivity assumes an additive relation between placebo and drug effects and is thus presenting an arithmetic summation. So far, no review has been carried out assessing the validity of the additive model, which is to be questioned and more closely investigated in this review. Initial searches for primary studies were undertaken in July 2016 using Pubmed and Google Scholar. In order to find matching publications of similar magnitude for the comparison part of this review, corresponding matches for all included reviews were sought. A total of 22 reviews and 3 clinical and experimental studies fulfilled the inclusion criteria. The results pointed to the following factors actively questioning the additive model: interactions of various effects, trial design, conditioning, context effects and factors, neurobiological factors, mechanism of action, statistical factors, intervention-specific factors (alcohol, caffeine), side-effects and type of intervention. All but one of the closely assessed publications was questioning the additive model. A closer examination of study design is necessary. An attempt in a more systematic approach geared towards solutions could be a suggestion for future research in this field. PMID:28321318
Does the model of additive effect in placebo research still hold true? A narrative review.

PubMed

Boehm, Katja; Berger, Bettina; Weger, Ulrich; Heusser, Peter

2017-03-01

Personalised and contextualised care has been turned into a major demand by people involved in healthcare suggesting to move toward person-centred medicine. The assessment of person-centred medicine can be most effectively achieved if treatments are investigated using 'with versus without' person-centredness or integrative study designs. However, this assumes that the components of an integrative or person-centred intervention have an additive relationship to produce the total effect. Beecher's model of additivity assumes an additive relation between placebo and drug effects and is thus presenting an arithmetic summation. So far, no review has been carried out assessing the validity of the additive model, which is to be questioned and more closely investigated in this review. Initial searches for primary studies were undertaken in July 2016 using Pubmed and Google Scholar. In order to find matching publications of similar magnitude for the comparison part of this review, corresponding matches for all included reviews were sought. A total of 22 reviews and 3 clinical and experimental studies fulfilled the inclusion criteria. The results pointed to the following factors actively questioning the additive model: interactions of various effects, trial design, conditioning, context effects and factors, neurobiological factors, mechanism of action, statistical factors, intervention-specific factors (alcohol, caffeine), side-effects and type of intervention. All but one of the closely assessed publications was questioning the additive model. A closer examination of study design is necessary. An attempt in a more systematic approach geared towards solutions could be a suggestion for future research in this field.
Effect of additives on mineral trioxide aggregate setting reaction product formation.

PubMed

Zapf, Angela M; Chedella, Sharath C V; Berzins, David W

2015-01-01

Mineral trioxide aggregate (MTA) sets via hydration of calcium silicates to yield calcium silicate hydrates and calcium hydroxide (Ca[OH]2). However, a drawback of MTA is its long setting time. Therefore, many additives have been suggested to reduce the setting time. The effect those additives have on setting reaction product formation has been ignored. The objective was to examine the effect additives have on MTA's setting time and setting reaction using differential scanning calorimetry (DSC). MTA powder was prepared with distilled water (control), phosphate buffered saline, 5% calcium chloride (CaCl2), 3% sodium hypochlorite (NaOCl), or lidocaine in a 3:1 mixture and placed in crucibles for DSC evaluation. The setting exothermic reactions were evaluated at 37°C for 8 hours to determine the setting time. Separate samples were stored and evaluated using dynamic DSC scans (37°C→640°C at10°C/min) at 1 day, 1 week, 1 month, and 3 months (n = 9/group/time). Dynamic DSC quantifies the reaction product formed from the amount of heat required to decompose it. Thermographic peaks were integrated to determine enthalpy, which was analyzed with analysis of variance/Tukey test (α = 0.05). Isothermal DSC identified 2 main exothermal peaks occurring at 44 ± 12 and 343 ± 57 minutes for the control. Only the CaCl2 additive was an accelerant, which was observed by a greater exothermic peak at 101 ± 11 minutes, indicating a decreased setting time. The dynamic DSC scans produced an endothermic peak around 450°C-550°C attributed to Ca(OH)2 decomposition. The use of a few additives (NaOCl and lidocaine) resulted in significantly less Ca(OH)2 product formation. DSC was used to discriminate calcium hydroxide formation in MTA mixed with various additives and showed NaOCl and lidocaine are detrimental to MTA reaction product formation, whereas CaCl2 accelerated the reaction. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.
Effect of polymer additives on hydrodynamics and oxygen transfer in a bubble column bioreactor.

PubMed

Kawase, Y

1993-01-01

The influence of polymer additives (polyethylene oxide and polyacrylamide) on the hydrodynamics and oxygen transfer in a bubble column bioreactor was examined. The addition of small amounts of these polymers has been known to cause significant drag reduction in turbulent flow circumstances. The gas hold-up was slightly decreased and the liquid-phase mixing was somewhat enhanced due to the addition of the polymers. The addition of polymer additives brought about a reduction of the volumetric oxygen transfer coefficient by about 40%. In dilute polymer solutions, large bubbles formed by bubble coalescence moved with high rise velocities in the presence of many small bubbles and the bubble size distributions were less uniform compared with those in water. The complicated changes in bubble hydrodynamic characteristics were examined to give possible explanations for oxygen transfer reduction.
Additive and Interactive Effects on Response Time Distributions in Visual Word Recognition

ERIC Educational Resources Information Center

Yap, Melvin J.; Balota, David A.

2007-01-01

Across 3 different word recognition tasks, distributional analyses were used to examine the joint effects of stimulus quality and word frequency on underlying response time distributions. Consistent with the extant literature, stimulus quality and word frequency produced additive effects in lexical decision, not only in the means but also in the…
Investigation of the effects of short chain processing additives on polymers

NASA Technical Reports Server (NTRS)

Singh, J. J.; Stclair, T. L.; Pratt, J. R.

1986-01-01

The effects of low level concentrations of several short chain processing additives on the properties of the 4,4'-bis(3,4-dicarboxyphenoxy) diphenylsulfide dianhydride (BDSDA)/4,4'-diaminodiphenyl ether (ODA)/1,3'-diaminobenzene (m-phenylene diamine) (MPA) (422) copolyimide were investigated. It was noted that 5 percent MPD/phthalic anhydride (PA) is more effective than 5 percent ODA/PA and BDSDA/aniline (AN) in strengthening the host material. However, the introduction of 10 percent BDSDA/AN produces disproportionately high effects on free volume and free electron density in the host copolyimide.
Effect of Surface-active Additives on Physical Properties of Slurries of Vapor-process Magnesium

NASA Technical Reports Server (NTRS)

Pinns, Murray L

1955-01-01

The presence of 3 to 5 percent surface-active additive gave the lowest Brookfield apparent viscosity, plastic viscosity, and yield value that were obtained for slurry fuels containing approximately 50 percent vapor-process magnesium in JP-1 fuel. The slurries settled little and were easily remixed. A polyoxyethylene dodecyl alcohol was the most effective of 13 additives tested in reducing the Brookfield apparent viscosity and the yield value of the slurry. The seven most effective additives all had a hydroxyl group plus an ester or polyoxethylene group in the molecule. The densities of some of the slurries were measured.
Preference option randomized design (PORD) for comparative effectiveness research: Statistical power for testing comparative effect, preference effect, selection effect, intent-to-treat effect, and overall effect.

PubMed

Heo, Moonseong; Meissner, Paul; Litwin, Alain H; Arnsten, Julia H; McKee, M Diane; Karasz, Alison; McKinley, Paula; Rehm, Colin D; Chambers, Earle C; Yeh, Ming-Chin; Wylie-Rosett, Judith

2017-01-01

Comparative effectiveness research trials in real-world settings may require participants to choose between preferred intervention options. A randomized clinical trial with parallel experimental and control arms is straightforward and regarded as a gold standard design, but by design it forces and anticipates the participants to comply with a randomly assigned intervention regardless of their preference. Therefore, the randomized clinical trial may impose impractical limitations when planning comparative effectiveness research trials. To accommodate participants' preference if they are expressed, and to maintain randomization, we propose an alternative design that allows participants' preference after randomization, which we call a "preference option randomized design (PORD)". In contrast to other preference designs, which ask whether or not participants consent to the assigned intervention after randomization, the crucial feature of preference option randomized design is its unique informed consent process before randomization. Specifically, the preference option randomized design consent process informs participants that they can opt out and switch to the other intervention only if after randomization they actively express the desire to do so. Participants who do not independently express explicit alternate preference or assent to the randomly assigned intervention are considered to not have an alternate preference. In sum, preference option randomized design intends to maximize retention, minimize possibility of forced assignment for any participants, and to maintain randomization by allowing participants with no or equal preference to represent random assignments. This design scheme enables to define five effects that are interconnected with each other through common design parameters-comparative, preference, selection, intent-to-treat, and overall/as-treated-to collectively guide decision making between interventions. Statistical power functions for testing
Reducing Communication in Algebraic Multigrid Using Additive Variants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vassilevski, Panayot S.; Yang, Ulrike Meier

Algebraic multigrid (AMG) has proven to be an effective scalable solver on many high performance computers. However, its increasing communication complexity on coarser levels has shown to seriously impact its performance on computers with high communication cost. Moreover, additive AMG variants provide not only increased parallelism as well as decreased numbers of messages per cycle but also generally exhibit slower convergence. Here we present various new additive variants with convergence rates that are significantly improved compared to the classical additive algebraic multigrid method and investigate their potential for decreased communication, and improved communication-computation overlap, features that are essential for goodmore » performance on future exascale architectures.« less
Reducing Communication in Algebraic Multigrid Using Additive Variants

DOE PAGES

Vassilevski, Panayot S.; Yang, Ulrike Meier

2014-02-12

Algebraic multigrid (AMG) has proven to be an effective scalable solver on many high performance computers. However, its increasing communication complexity on coarser levels has shown to seriously impact its performance on computers with high communication cost. Moreover, additive AMG variants provide not only increased parallelism as well as decreased numbers of messages per cycle but also generally exhibit slower convergence. Here we present various new additive variants with convergence rates that are significantly improved compared to the classical additive algebraic multigrid method and investigate their potential for decreased communication, and improved communication-computation overlap, features that are essential for goodmore » performance on future exascale architectures.« less

Effect of mineral additives (natural pozzolana and sand of dunes) by substitution of cement on the performance and durability of mortars

NASA Astrophysics Data System (ADS)

Saidi, M.; Safi, B.

2016-04-01

The objective of our work consists of the study of the substitution effects of clinker by mineral additions such as: natural pozzolana (PZ) and the sand of dunes (SD) finely crushed on the mechanical properties and the durability of the mortars worked out according to various combinations containing these additions. The results from this research confirm that the substitution of 20% to 30% of cement APC (Artificial Portland Cement) by additions in binary cement (APC + PZ) or ternary (APC + PZ + SD) contributes positively to the mechanical strength of mortars and resistance to the chemical attacks in various corrosive conditions such as: hydrochloric acid, sulfuric acid and nitric acid. The mechanical strength of the different variants is comparable to those of the APC. The test results of the weight loss and phenolphthalein shows that the chemical resistance of variants (PZ20) and (PZ20 with SD5) are larger compared to the reference mortar APC and other variants. This study shows that adding value by substituting a part of clinker. This substitution can save 20% to 30% of clinker used for the manufacture of cement; this will have a beneficial effect for cement and economically (less energy spent for the clinker burning). This study contributes to the protection of the environment as to produce one ton of clinker generates about one ton of CO2 is harmful to the atmosphere. Based on our results we will reduce from 20% to 30% CO2 gas responsible for the greenhouse effect.
Web-based Comparative Patient-reported Outcome Feedback to Support Quality Improvement and Comparative Effectiveness Research in Total Joint Replacement.

PubMed

Zheng, Hua; Li, Wenjun; Harrold, Leslie; Ayers, David C; Franklin, Patricia D

2014-01-01

Patient-reported outcomes (PROs) are rarely included in quality monitoring systems, surgeon comparative feedback reports, or registries. We present the design and implementation of a secure website in a federally funded research program-Function and Outcomes Research for Comparative Effectiveness in Total Joint Replacement (FORCE-TJR)-to return comparative PRO reports to participating surgeons, in addition to including traditional quality measures, in order to monitor and improve quality and health outcomes. The surgeon-specific comparative PRO reports were designed and structured based on user input for content, data elements, integration, and display. Three questions are addressed regarding the knee and hip joint symptom profiles of patients before TJR, as well as outcomes of surgery. The website is organized with a hierarchical structure to display data at national, practice, and individual surgeon levels, and provides a comprehensive site-level executive summary and surgeon-level data reports that can be downloaded. As of September 2014, over 22,000 patients were enrolled from more than 130 surgeons in 22 states. The reporting website was launched in September 2012 and has been updated quarterly for all surgeons to review their site- and individual-specific outcomes data compared to national benchmarks. In this novel system, quarterly comparative surgeon feedback extends beyond traditional measures of complication rates to include PROs of pain relief and functional gain. We anticipate that this enhanced data will facilitate patient-centered quality improvement (QI) and outcomes research from the registry. As the Centers for Medicare & Medicaid Services (CMS) and other insurers consider future implementation of PROs, surgeons will increasingly need comparative data by which to self-monitor their practice outcomes.
Effects of Bread Making and Wheat Germ Addition on the Natural Deoxynivalenol Content in Bread

PubMed Central

Giménez, Isabel; Blesa, Jesús; Herrera, Marta; Ariño, Agustín

2014-01-01

Deoxynivalenol (DON, vomitoxin) is a type-B trichothecene mycotoxin produced by several field fungi such as Fusarium graminearum and Fusarium culmorum and known to have various toxic effects. This study investigated the effect of the bread making process on the stability of DON in common bread and wheat germ-enriched bread using naturally contaminated ingredients at the level of 560 µg/kg. The concentration of DON and its evolution during bread making were determined by immunoaffinity column cleanup followed by liquid chromatography with diode array detection (HPLC-DAD). During the bread making process, DON was reduced by 2.1% after fermentation and dropped by 7.1% after baking, reaching a maximum reduction of 19.8% in the crust as compared with a decrease of 5.6% in the crumb. The addition of 15% wheat germ to the dough did not affect DON stability during bread making, showing an apparent increase of 3.5% after fermentation and a reduction by 10.2% after baking. PMID:24451845
Catalytic functionalities of supported sulfides. I. Effect of support and additives on the CoMo catalyst

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muralidhar, G.; Massoth, F.E.; Shabtai, J.

1984-01-01

C-S hydrogenolysis (HDS) of thiophene, hydrogenation (HYD) of 1-hexene, and hydrocracking (HCG) of 2,4,4-trimethyl-1-pentene, were used as separate model test reactions to differentiate and assess the catalytic functionalities of sulfided CoMo catalysts, and their dependence on the nature of the support and incorporation of additives. Rate constants and relative catalyst activities for these three reaction types were determined. HDS and HYD activities of CoMo supported on different types of Al/sub 2/O/sub 3/ were higher, while the HCG activity was lower compared with CoMo supported on SiO/sub 2/-Al/sub 2/O/sub 3/, SiO/sub 2/-MgO, or TiO/sub 2/. For SiO/sub 2/-Al/sub 2/O/sub 3/ supportsmore » both HDS and HYD activities decreased with increase in SiO/sub 2/ content from 10 to 75%, while HCG activity showed the opposite trend. Additives to a finished CoMo catalyst at 0.5% level caused variations in HDS and HCG activities, while HYD was essentially unaffected. HDS was promoted by NH/sub 4/HF/sub 2/ and NH/sub 4/Cl, but depressed by NaNO/sub 3/, Ca(NO/sub 3/)/sub 2/, and H/sub 3/BO/sub 3/. HCG was promoted by NH/sub 4/HF/sub 2/, NH/sub 4/Cl, and H/sub 3/BO/sub 3/. Additives at 5% level, prior to or after CoMo impregnation, showed a strong depressing effect on HDS and a lesser effect on HYD, while HCG was strongly promoted by NH/sub 4/HF/sub 2/, Ti isopropoxide, and H/sub 3/BO/sub 3/. The changes in catalytic functionalities are rationalized in terms of different interactions between CoMo phase, support, and additives. 3 tables, 1 figure.« less
Comparing an additional hour of cycler therapy to an additional midday exchange to achieve adequacy targets.

PubMed

Pagé, D E

2000-01-01

As CAPD patients lose residual renal function, adequate dialysis is frequently impossible to obtain unless the dialysis prescription is changed. For patients already on cycler therapy with a "wet" day, we compared the advantage of adding one hour on the cycler to adding an extra, midday exchange. To compare the two approaches, we used a commercial computer program to optimize solute clearance in 90 patients. Adding one hour of cycler therapy increases Kt/V and creatinine clearance (CrCl) by approximately 6.4%-8%. When a midday exchange is added, the increase in Kt/V and CrCl varies between 17.5% and 21.6%. We conclude that adding an extra, midday exchange always gives a better increase in weekly Kt/V and CrCl than that obtained by adding an extra hour of cycler therapy.
Additive manufacturing of reflective optics: evaluating finishing methods

NASA Astrophysics Data System (ADS)

Leuteritz, G.; Lachmayer, R.

2018-02-01

Individually shaped light distributions become more and more important in lighting technologies and thus the importance of additively manufactured reflectors increases significantly. The vast field of applications ranges from automotive lighting to medical imaging and bolsters the statement. However, the surfaces of additively manufactured reflectors suffer from insufficient optical properties even when manufactured using optimized process parameters for the Selective Laser Melting (SLM) process. Therefore post-process treatments of reflectors are necessary in order to further enhance their optical quality. This work concentrates on the effectiveness of post-process procedures for reflective optics. Based on already optimized aluminum reflectors, which are manufactured with a SLM machine, the parts are differently machined after the SLM process. Selected finishing methods like laser polishing, sputtering or sand blasting are applied and their effects quantified and compared. The post-process procedures are investigated on their impact on surface roughness and reflectance as well as geometrical precision. For each finishing method a demonstrator will be created and compared to a fully milled sample and among themselves. Ultimately, guidelines are developed in order to figure out the optimal treatment of additively manufactured reflectors regarding their optical and geometrical properties. Simulations of the light distributions will be validated with the developed demonstrators.
Inhaled diesel emissions generated with cerium oxide nanoparticle fuel additive induce adverse pulmonary and systemic effects.

PubMed

Snow, Samantha J; McGee, John; Miller, Desinia B; Bass, Virginia; Schladweiler, Mette C; Thomas, Ronald F; Krantz, Todd; King, Charly; Ledbetter, Allen D; Richards, Judy; Weinstein, Jason P; Conner, Teri; Willis, Robert; Linak, William P; Nash, David; Wood, Charles E; Elmore, Susan A; Morrison, James P; Johnson, Crystal L; Gilmour, Matthew Ian; Kodavanti, Urmila P

2014-12-01

Diesel exhaust (DE) exposure induces adverse cardiopulmonary effects. Cerium oxide nanoparticles added to diesel fuel (DECe) increases fuel burning efficiency but leads to altered emission characteristics and potentially altered health effects. Here, we evaluated whether DECe results in greater adverse pulmonary effects compared with DE. Male Sprague Dawley rats were exposed to filtered air, DE, or DECe for 5 h/day for 2 days. N-acetyl glucosaminidase activity was increased in bronchial alveolar lavage fluid (BALF) of rats exposed to DECe but not DE. There were also marginal but insignificant increases in several other lung injury biomarkers in both exposure groups (DECe > DE for all). To further characterize DECe toxicity, rats in a second study were exposed to filtered air or DECe for 5 h/day for 2 days or 4 weeks. Tissue analysis indicated a concentration- and time-dependent accumulation of lung and liver cerium followed by a delayed clearance. The gas-phase and high concentration of DECe increased lung inflammation at the 2-day time point, indicating that gas-phase components, in addition to particles, contribute to pulmonary toxicity. This effect was reduced at 4 weeks except for a sustained increase in BALF γ-glutamyl transferase activity. Histopathology and transmission electron microscopy revealed increased alveolar septa thickness due to edema and increased numbers of pigmented macrophages after DECe exposure. Collectively, these findings indicate that DECe induces more adverse pulmonary effects on a mass basis than DE. In addition, lung accumulation of cerium, systemic translocation to the liver, and delayed clearance are added concerns to existing health effects of DECe. Published by Oxford University Press on behalf of the Society of Toxicology 2014. This work is written by US Government employees and is in the public domain in the US.
The effect of additional physiotherapy to hospital inpatients outside of regular business hours: a systematic review.

PubMed

Brusco, Natasha K; Paratz, Jennifer

2006-12-01

Provision of out of regular business hours (OBH) physiotherapy to hospital inpatients is widespread in the hospital setting. This systematic review evaluated the effect of additional OBH physiotherapy services on patient length of stay (LOS), pulmonary complications, discharge destination, discharge mobility status, quality of life, cost saving, adverse events, and mortality compared with physiotherapy only within regular business hours. A literature search was completed on databases with citation tracking using key words. Two reviewers completed data extraction and quality assessment independently by using modified scales for historical cohorts and case control studies as well as the PEDro scale for randomized controlled trials and quasi-randomised controlled trials. This search identified nine articles of low to medium quality. Four reported a significant reduction in LOS associated with additional OBH physiotherapy, with two articles reporting overall significance and two reporting only for specific subgroups. Two studies reported significant reduction in pulmonary complications for two different patient groups in an intensive care unit (ICU) with additional OBH physiotherapy. Three studies accounted for discharge destination and/or discharge mobility status with no significant difference reported. Quality of life, adverse events, and mortality were not reported in any studies. Cost savings were considered in three studies, with two reporting a cost saving. This systematic review was unable to conclude that the provision of additional OBH physiotherapy made significant improvement to patient outcomes for all subgroups of inpatients. One study in critical care reported that overnight physiotherapy decreased LOS and reduced pulmonary complications of patients in the ICU. However, the studies in the area of orthopaedics, neurology, postcardiac surgery, and rheumatology, which all considered additional daytime weekend physiotherapy intervention, did not provide
Effect of several variables in the polymer toys additive migration to saliva.

PubMed

Noguerol-Cal, R; López-Vilariño, J M; González-Rodríguez, M V; Barral-Losada, L

2011-09-30

Capacity to migrate of a representative group of polymeric additives, dyes, antioxidants, hindered amine light stabilizers (HALS) or antistatics, from plastic toys to saliva was analyzed to protect children in their habits of sucking and biting. Most of target additives appear no-regulated in toys normative but adverse effects on human health of some of them have been demonstrated and their presence in others commercial articles normative has been included. In order to offer an effective and easy tool to perform these controls, migration tests by dynamic and static contact, followed by a preconcentration step by liquid-liquid extraction (LLE) and ultra performance liquid chromatographic analysis with ultraviolet-visible and evaporative light scattering detections (UPLC-UV/Vis-ELSD) have been optimized to evaluate the migrated amounts of the additives in saliva simulant. The detection limits of the migration methodologies were ranged from 8.68 × 10(-2) to 1.30 × 10(-3)mg migrated (L simulant)(-1). Influence of several variables on this mass transport, as time, temperature and friction, was also analyzed to achieve the most aggressive methodology to protect consumers. Migration of several studied additives, whose presence has been demonstrated in several purchased commercial toys, has been observed. Copyright © 2011 Elsevier B.V. All rights reserved.
Effects of Salinity and Nutrient Addition on Mangrove Excoecaria agallocha

PubMed Central

Chen, Yaping; Ye, Yong

2014-01-01

Effects of salinity on seed germination and growth of young (1 month old) and old (2-year old) seedlings of Excoecaria agallocha were investigated. Combined effects of salinity and nutrient level were also examined on old seedlings. Seed germination was best at 0 and 5 psu salinity. 15 psu salinity significantly delayed root initiation and decreased final establishment rate. All seeds failed to establish at 25 psu salinity. Young seedlings performed best at 0 and 5 psu, but growth was stunned at 15 psu, and all seedlings died within 90 days at 25 psu. Old seedlings grew best at salinities below 5 psu and they survived the whole cultivation at 25 psu. This indicated that E. agallocha increased salt tolerance over time. Gas exchange was significantly compromised by salinities above 15 psu but evidently promoted by high nutrient. Proline accumulated considerably at high nutrient, and its contents increased from 0 to 15 psu but decreased at 25 psu salinity. Lipid peroxidation was aggravated by increasing salinity beyond 15 psu but markedly alleviated by nutrient addition. These responses indicated that E. agallocha was intolerant to high salinity but it can be greatly enhanced by nutrient addition. PMID:24691495
Effects of Combining Na and Sr additions on Eutectic Modification in Al-Si alloy

NASA Astrophysics Data System (ADS)

Zhu, G. L.; Gu, N. J.; Zhou, B. J.

2017-09-01

Experiments were designed to investigate the effects of strontium and sodium modified on the eutectic silicon for Al-Si alloy. It was found that combining addition of Na and Sr did not appear to cause deleterious interactions of modification, at at the same time, Sr-Na was fairly constant with holding time and without obvious modification fading. Addition of Na-Sr modifier could take effect quickly and decrease incubation period.
Comparative-effectiveness research in distributed health data networks.

PubMed

Toh, S; Platt, R; Steiner, J F; Brown, J S

2011-12-01

Comparative-effectiveness research (CER) can be conducted within a distributed health data network. Such networks allow secure access to separate data sets from different data partners and overcome many practical obstacles related to patient privacy, data security, and proprietary concerns. A scalable network architecture supports a wide range of CER activities and meets the data infrastructure needs envisioned by the Federal Coordinating Council for Comparative Effectiveness Research.
Additive Effects of Threat-of-Shock and Picture Valence on Startle Reflex Modulation

PubMed Central

Bublatzky, Florian; Guerra, Pedro M.; Pastor, M. Carmen; Schupp, Harald T.; Vila, Jaime

2013-01-01

The present study examined the effects of sustained anticipatory anxiety on the affective modulation of the eyeblink startle reflex. Towards this end, pleasant, neutral and unpleasant pictures were presented as a continuous stream during alternating threat-of-shock and safety periods, which were cued by colored picture frames. Orbicularis-EMG to auditory startle probes and electrodermal activity were recorded. Previous findings regarding affective picture valence and threat-of-shock modulation were replicated. Of main interest, anticipating aversive events and viewing affective pictures additively modulated defensive activation. Specifically, despite overall potentiated startle blink magnitude in threat-of-shock conditions, the startle reflex remained sensitive to hedonic picture valence. Finally, skin conductance level revealed sustained sympathetic activation throughout the entire experiment during threat- compared to safety-periods. Overall, defensive activation by physical threat appears to operate independently from reflex modulation by picture media. The present data confirms the importance of simultaneously manipulating phasic-fear and sustained-anxiety in studying both normal and abnormal anxiety. PMID:23342060
Addition of grape pomace extract to probiotic fermented goat milk: the effect on phenolic content, probiotic viability and sensory acceptability.

PubMed

Dos Santos, Karina Mo; de Oliveira, Isabel C; Lopes, Marcos Ac; Cruz, Ana Paula Gil; Buriti, Flávia Ca; Cabral, Lourdes M

2017-03-01

Grape pomace is a source of phenolic compounds, which are associated with health benefits in humans. Additionally, fermented dairy foods with probiotics can be good vehicles to deliver these bioactive compounds. The effects of the addition of grape pomace extract (GPE) on the total phenolic (TP) content, physico-chemical characteristics and viability of Lactobacillus acidophilus LA-5 or Lactobacillus rhamnosus HN001 in fermented goat milks prepared with grape juice were investigated. The TP concentration increased significantly in fermented milks with the addition of GPE. A protective effect of GPE on the viability of L. acidophilus was observed. However, after 14 days of storage, the populations of L. acidophilus were significantly lower when compared with those of L. rhamnosus, and only the last probiotic maintained its viability above 7 log CFU mL -1 throughout the period investigated. The sensory scores of flavor, color and overall acceptability of the fermented milk containing L. rhamnosus HN001 were significantly increased when GPE was added. The use of GPE might increase the functionality of probiotic fermented goat milk processed with L. rhamnosus HN001 and grape juice because grape polyphenols are known for their antioxidant properties and positive effect on the modulation of gut microbiota. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.
[Food additives and healthiness].

PubMed

Heinonen, Marina

2014-01-01

Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.
Age and Zebu-Holstein additive and heterotic effects on lactation performance and reproduction in Brazil.

PubMed

Martinez, M L; Lee, A J; Lin, C Y

1988-03-01

Data of 6482 lactations from 14 crossbred (Holstein x Zebu) herds in Brazil were used to study breed additive and heterosis effects for first, second, third, and first to fifth lactation milk yields, age at first calving, calving interval, and milk yield divided by calving interval, as well as the effect of age at calving on milk yield. Holstein additive expressed as deviation from Zebu and heterosis effects were highly significant for all traits. For each percentage of Holstein gene contribution an increase of 10.02, 12.02, 12.51, and 12.15 kg of milk were expected for first, second, third, and first to fifth lactation yields, respectively. Corresponding heterosis effects on those traits were 3.80, 3.39, 4.02, and 3.90 kg of milk for each percentage of heterozygosity. Replacement of pure Zebu genes by Holstein genes reduced age at first calving by 6 mo and shortened calving interval by 37 d. Holstein x Zebu heterotic effect decreased age at first calving by 2 mo and calving interval by 39 d. Holstein additive and heterosis effects for milk yield divided by calving interval were 3.4 and 1.3 kg of milk/d, respectively. Fitting breed additive and heterozygosity effects accounted for 99% of the genetic effects except for first to fifth lactation milk yield.
Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type.

PubMed

Ahmadi, S M; Hedayati, R; Li, Y; Lietaert, K; Tümer, N; Fatemi, A; Rans, C D; Pouran, B; Weinans, H; Zadpoor, A A

2018-01-01

Additive manufacturing (AM) techniques enable fabrication of bone-mimicking meta-biomaterials with unprecedented combinations of topological, mechanical, and mass transport properties. The mechanical performance of AM meta-biomaterials is a direct function of their topological design. It is, however, not clear to what extent the material type is important in determining the fatigue behavior of such biomaterials. We therefore aimed to determine the isolated and modulated effects of topological design and material type on the fatigue response of metallic meta-biomaterials fabricated with selective laser melting. Towards that end, we designed and additively manufactured Co-Cr meta-biomaterials with three types of repeating unit cells and three to four porosities per type of repeating unit cell. The AM meta-biomaterials were then mechanically tested to obtain their normalized S-N curves. The obtained S-N curves of Co-Cr meta-biomaterials were compared to those of meta-biomaterials with same topological designs but made from other materials, i.e. Ti-6Al-4V, tantalum, and pure titanium, available from our previous studies. We found the material type to be far more important than the topological design in determining the normalized fatigue strength of our AM metallic meta-biomaterials. This is the opposite of what we have found for the quasi-static mechanical properties of the same meta-biomaterials. The effects of material type, manufacturing imperfections, and topological design were different in the high and low cycle fatigue regions. That is likely because the cyclic response of meta-biomaterials depends not only on the static and fatigue strengths of the bulk material but also on other factors that may include strut roughness, distribution of the micro-pores created inside the struts during the AM process, and plasticity. Meta-biomaterials are a special class of metamaterials with unusual or unprecedented combinations of mechanical, physical (e.g. mass transport
Atorvastatin Combined Nitroglycerin Therapy Confer Additive Effects on Rabbits with Dyslipidemia.

PubMed

Yang, Fang; Wang, Jindong; Li, Fei; Cui, Lei

2016-06-01

Endogenous nitric oxide (NO) is beneficial for inhibiting Rho-associated kinase 2 (ROCK2) expression. However, the effect of exogenous NO on ROCK2 expression is less investigated. Rabbits with dyslipidemia were produced and randomly assigned into untreated, atorvastatin, nitroglycerin and combined groups (n=10 in each group). Medication therapy was lasted for 2 weeks. Parameters of interest including lipid profiles, liver enzyme, C-reactive protein (CRP), malondialdehyde (MDA), NO level and ROCK2 level were assessed at baseline, 2 weeks of dyslipidemia establishment and 2 weeks of medication treatment. No significant difference in parameters was found between groups at baseline. With 2 weeks of dyslipidemia establishment, as compared to baseline, serum levels of lipid profiles, CRP and MDA were profoundly elevated. In addition, reduced NO generation and enhanced ROCK2 expression were also observed. With 2 weeks of medication therapy, lipid profiles, systemic inflammation (reflected as serum CRP level) and oxidation (reflected as serum MDA level) were improved in the atorvastatin and combined groups but not in the nitroglycerin group (P<0.05). Furthermore, increased NO production in accompany with reduced ROCK2 expression were observed in both the atorvastatin and nitroglycerin groups, and these benefits were further enhanced by combined therapy (P<0.05). No liver enzymes elevation was observed after 2 weeks of medication therapy. Nitroglycerin-derived exogenous NO could effectively inhibit ROCK2 expression in rabbits with dyslipidemia which is independent of lipid-modification, and these efficacies could be enhanced by statins therapy. © Georg Thieme Verlag KG Stuttgart · New York.
[Effects of biochar addition into soils in semiarid land on water infiltration under the condition of the same bulk density].

PubMed

Qi, Rui-Peng; Zhang, Lei; Yan, Yong-Hao; Wen, Man; Zheng, Ji-Yong

2014-08-01

Making clear the effects of biochar addition on soil water infiltration process can provide the scientific basis for the evaluation of the influence of biochar application on soil hydrology in semi-arid region. In this paper, through the soil column simulation method in laboratory, the effects of biochar of three sizes (1-2 mm, 0.25-1 mm and ≤ 0.25 mm) at 4 doses (10, 50, 100 and 150 g x kg(-1)) on the cumulative infiltration, the permeability and the stable infiltration rate of two different soils (anthrosol and aeolian sandy soil) were studied. The results showed that the infiltration capacity of the anthrosol was obviously increased compared to the control, however, the one in the aeolian sandy soil was decreased due to the biochar addition. At 100 minutes after infiltration starting, the averaged cumulative infiltration was increased by 25.1% in the anthrosol with comparison to the control. Contrarily, the averaged cumulative infiltration was decreased by 11.1% in the aeolian sandy soil at 15 minutes after infiltration starting. When the dose was the same, biochar with different particle sizes improved the infiltration for the anthrosol, but for the different dose treatments, the particle size of biochar which showed the greatest improvement was different. As for the aeolian sandy soil, the infiltration increased at the dose of 10 g x kg(-1) after the addition of biochar with different particle sizes, while decreased at the higher dose of 50, 100 and 150 g x kg(-1). The cumulative infiltration of the aeolian sandy soil was decreased with the increase in addition amount of biochar with the same particle size, while it was not so for the anthrosol. The determination coefficient fitted by the Philip infiltration model ranged from 0.965 to 0.999, suggesting this model was suitable for the simulation of soil water infiltration process after biochar application. Statistical analysis of main effects showed that the biochar particle size, the biochar addition amount
Widespread non-additive and interaction effects within HLA loci modulate the risk of autoimmune diseases.

PubMed

Lenz, Tobias L; Deutsch, Aaron J; Han, Buhm; Hu, Xinli; Okada, Yukinori; Eyre, Stephen; Knapp, Michael; Zhernakova, Alexandra; Huizinga, Tom W J; Abecasis, Gonçalo; Becker, Jessica; Boeckxstaens, Guy E; Chen, Wei-Min; Franke, Andre; Gladman, Dafna D; Gockel, Ines; Gutierrez-Achury, Javier; Martin, Javier; Nair, Rajan P; Nöthen, Markus M; Onengut-Gumuscu, Suna; Rahman, Proton; Rantapää-Dahlqvist, Solbritt; Stuart, Philip E; Tsoi, Lam C; van Heel, David A; Worthington, Jane; Wouters, Mira M; Klareskog, Lars; Elder, James T; Gregersen, Peter K; Schumacher, Johannes; Rich, Stephen S; Wijmenga, Cisca; Sunyaev, Shamil R; de Bakker, Paul I W; Raychaudhuri, Soumya

2015-09-01

Human leukocyte antigen (HLA) genes confer substantial risk for autoimmune diseases on a log-additive scale. Here we speculated that differences in autoantigen-binding repertoires between a heterozygote's two expressed HLA variants might result in additional non-additive risk effects. We tested the non-additive disease contributions of classical HLA alleles in patients and matched controls for five common autoimmune diseases: rheumatoid arthritis (ncases = 5,337), type 1 diabetes (T1D; ncases = 5,567), psoriasis vulgaris (ncases = 3,089), idiopathic achalasia (ncases = 727) and celiac disease (ncases = 11,115). In four of the five diseases, we observed highly significant, non-additive dominance effects (rheumatoid arthritis, P = 2.5 × 10(-12); T1D, P = 2.4 × 10(-10); psoriasis, P = 5.9 × 10(-6); celiac disease, P = 1.2 × 10(-87)). In three of these diseases, the non-additive dominance effects were explained by interactions between specific classical HLA alleles (rheumatoid arthritis, P = 1.8 × 10(-3); T1D, P = 8.6 × 10(-27); celiac disease, P = 6.0 × 10(-100)). These interactions generally increased disease risk and explained moderate but significant fractions of phenotypic variance (rheumatoid arthritis, 1.4%; T1D, 4.0%; celiac disease, 4.1%) beyond a simple additive model.

Effects of Progressive Addition Lens Wear on Digital Work in Pre-presbyopes

PubMed Central

Kee, Chea-su; Leung, Tsz Wing; Kan, Ka-hung; Lam, Christie Hang-I

2018-01-01

SIGNIFICANCE Growing popularity of handheld digital devices imposes significant challenges to our visual system and clinical management. This study aimed to determine the effects of lens design on parameters that may influence the refractive management of pre-presbyopic adult computer users. PURPOSE To determine the effects of wearing conventional single-vision lenses (SVL) versus progressive addition lenses (PAL) on the working distance and refractive status. METHODS Adult computer users, recruited from two age cohorts (18 to 25 years, n = 19; 30 to 40 years, n = 45), were prescribed SVLs and PALs designed for use with handheld digital devices. For each lens type, the working distance and refractive shift (post-task − pre-task) were measured immediately after lens delivery (T0) and after 1 month of lens wear (T1). Working distances were recorded with an automatic ultrasound device while the participants were playing a video game. Refractive status through the subjects' glasses was measured before (pre-task) and after playing the game (post-task). Questionnaires assessing the frequencies of 10 digital work–related visual symptoms were conducted for both lens types at T1. RESULTS Switching from SVL to PAL increased the working distance in both cohorts (mean ± SEM = 1.88 ± 0.60 cm; P = .002) and induced a small but significant positive refractive shift (+0.08 ± 0.04 D, P = .021) in the older cohort at T1. In the younger cohort, the changes in working distance due to the switching lens design were correlated with myopic error (r = +0.66, P = .002). In the older cohort, the changes in refractive shift due to switching lens design were correlated with amplitude of accommodation at both time points (r for T0 and T1 = −0.32 and −0.30, respectively; both P < .05). Progressive addition lens was rated as causing less “increased sensitivity to light” compared with SVL. CONCLUSIONS Switching from SVL to PAL increased the working distance and induced a positive
Density gradient centrifugation of sperm from a subfertile stallion and effect of seminal plasma addition on fertility.

PubMed

Mari, Gaetano; Castagnetti, Carolina; Rizzato, Giovanni; Mislei, Beatrice; Iacono, Eleonora; Merlo, Barbara

2011-06-01

Stallions are not selected for fertility but for other criteria (pedigree, conformation, performances, progeny), therefore valuable but subfertile stallions with poor semen quality are frequently used in commercial breeding programs. The object of this study was to evaluate whether sperm selection through a silane-coated silica colloid gradient centrifugation, with or without the addition of seminal plasma of a high fertile stallion, could improve the pregnancy rates of an oligospermic valuable stallion in a commercial breeding program. In 2008 breeding season (experiment 1, n=104 mares), simple centrifugation and density gradient centrifugation of the sperm were compared. In 2009 and 2010 breeding seasons (experiment 2, n=125 mares), the effect of the addition of 5% seminal plasma to the extender after sperm selection was evaluated. In all mares deep horn uterine insemination was performed with 1 ml containing 50×10(6) morphologically normal progressive motile spermatozoa, 24-30 h after induction of ovulation with hCG. Pregnancy diagnosis by ultrasonography was performed 14 days following ovulation. Results showed a higher per cycle pregnancy rate (P>0.05) when sperm selection through a density gradient was used (62% vs. 42.3%, exp 1), while the addition of 5% seminal plasma did not influence the outcome (45.9% vs. 47.6%, exp 2) (P>0.05). An age-related decrease in the fertility of the stallion was observed when comparing the results from the different breeding seasons (P<0.05). In conclusion, sperm selection through a discontinuous density gradient enabled a normal per cycle pregnancy rate to be achieved from an oligospermic-subfertile stallion in a commercial breeding program, and no differences were observed regarding the addition of seminal plasma. Copyright © 2011 Elsevier B.V. All rights reserved.
Effect of carbide additions on grain growth in TiC-Ni cermets

NASA Astrophysics Data System (ADS)

Shin, Soon-Gi; Lee, Jun-Hee

2006-02-01

The growth of carbide particles in TiC-XC-2 vol.% Ni and TiC-XC-30 vol.% Ni alloys, where X=Zr, Cr, W, Ta and Mo, was fitted to an equation of the form d3-do 3=Kt. The grain growth behavior during liquid phase sintering at 1673K decreased markedly with the addition of Mo2C or WC, changed little for TaC, and increased with the addition of ZrC or Cr3C2. The grain contiguity decreased with increasing Ni content in the TiC-Mo2C-Ni alloy and was greater in the alloys with smaller growth rate constant. Consequently, the effect of carbide addition on the grain growth of 2 vol.% Ni alloys was found to be similar to that of 30 vol.% Ni alloys. The grain growth mechanism could be explained by the effect of contiguous carbide grain boundaries in restricting the overall grain growth, as well as the area of the solid/liquid interfaces in the alloy by the usual solution/reprecipitation model.
The Effect of Detonation Wave Incidence Angle on the Acceleration of Flyers by Explosives Heavily Laden with Inert Additives

NASA Astrophysics Data System (ADS)

Loiseau, Jason; Georges, William; Frost, David; Higgins, Andrew

2015-06-01

The incidence angle of a detonation wave is often assumed to weakly influence the terminal velocity of an explosively driven flyer. For explosives heavily loaded with dense additives, this may not be true due to differences in momentum and energy transfer between detonation products, additive particles, and the flyer. For tangential incidence the particles are first accelerated against the flyer via an expansion fan, whereas they are first accelerated by the detonation wave in the normal case. In the current study we evaluate the effect of normal versus tangential incidence on the acceleration of flyers by nitromethane heavily loaded with a variety of additives. Normal detonation was initiated via an explosively driven slapper. Flyer acceleration was measured with heterodyne laser interferometry (PDV). The influence of wave angle is evaluated by comparing the terminal velocity in the two cases (i.e., normal and grazing) for the heavily loaded mixtures. The decrement in flyer velocity correlated primarily with additive volume fraction and had a weak dependence on additive density or particle size. The Gurney energy of the heterogeneous explosive was observed to increase with flyer mass, presumably due to the timescale over which impinging particles could transfer momentum.
[Effects of menthol as an additive in tobacco products and the need for regulation].

PubMed

Kahnert, S; Nair, U; Mons, U; Pötschke-Langer, M

2012-03-01

Menthol is the most widely used and the most prominent tobacco additive in tobacco products advertised and marketed by the tobacco industry. Besides its characteristic flavor, it possesses a variety of pharmacological properties facilitating tobacco smoke inhalation and potentiating dependence. These properties of menthol not only favor tobacco initiation and consumption but can also prevent smoking cessation. This article summarizes the effect of menthol as an additive in tobacco products and its effect on tobacco consumption that causes a number of chronic diseases and premature death and, therefore, counteracts tobacco control measures. Currently, there is no legislative regulation in Germany that considers the health hazard, addiction-enhancing and attractiveness-increasing properties of additives permitted in tobacco products. Effective regulation or even a ban could contribute to a reduction of tobacco consumption and, hence, save many people from a long-lasting tobacco dependence.
Using a generalized additive model with autoregressive terms to study the effects of daily temperature on mortality.

PubMed

Yang, Lei; Qin, Guoyou; Zhao, Naiqing; Wang, Chunfang; Song, Guixiang

2012-10-30

Generalized Additive Model (GAM) provides a flexible and effective technique for modelling nonlinear time-series in studies of the health effects of environmental factors. However, GAM assumes that errors are mutually independent, while time series can be correlated in adjacent time points. Here, a GAM with Autoregressive terms (GAMAR) is introduced to fill this gap. Parameters in GAMAR are estimated by maximum partial likelihood using modified Newton's method, and the difference between GAM and GAMAR is demonstrated using two simulation studies and a real data example. GAMM is also compared to GAMAR in simulation study 1. In the simulation studies, the bias of the mean estimates from GAM and GAMAR are similar but GAMAR has better coverage and smaller relative error. While the results from GAMM are similar to GAMAR, the estimation procedure of GAMM is much slower than GAMAR. In the case study, the Pearson residuals from the GAM are correlated, while those from GAMAR are quite close to white noise. In addition, the estimates of the temperature effects are different between GAM and GAMAR. GAMAR incorporates both explanatory variables and AR terms so it can quantify the nonlinear impact of environmental factors on health outcome as well as the serial correlation between the observations. It can be a useful tool in environmental epidemiological studies.
Using a generalized additive model with autoregressive terms to study the effects of daily temperature on mortality

PubMed Central

2012-01-01

Background Generalized Additive Model (GAM) provides a flexible and effective technique for modelling nonlinear time-series in studies of the health effects of environmental factors. However, GAM assumes that errors are mutually independent, while time series can be correlated in adjacent time points. Here, a GAM with Autoregressive terms (GAMAR) is introduced to fill this gap. Methods Parameters in GAMAR are estimated by maximum partial likelihood using modified Newton’s method, and the difference between GAM and GAMAR is demonstrated using two simulation studies and a real data example. GAMM is also compared to GAMAR in simulation study 1. Results In the simulation studies, the bias of the mean estimates from GAM and GAMAR are similar but GAMAR has better coverage and smaller relative error. While the results from GAMM are similar to GAMAR, the estimation procedure of GAMM is much slower than GAMAR. In the case study, the Pearson residuals from the GAM are correlated, while those from GAMAR are quite close to white noise. In addition, the estimates of the temperature effects are different between GAM and GAMAR. Conclusions GAMAR incorporates both explanatory variables and AR terms so it can quantify the nonlinear impact of environmental factors on health outcome as well as the serial correlation between the observations. It can be a useful tool in environmental epidemiological studies. PMID:23110601
Effect of indium addition in U-Zr metallic fuel on lanthanide migration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Yeon Soo; Wiencek, T.; O'Hare, E.

Advanced fast reactor concepts to achieve ultra-high burnup (~50%) require prevention of fuel-cladding chemical interaction (FCCI). Fission product lanthanide accumulation at high burnup is substantial and significantly contributes to FCCI upon migration to the cladding interface. Diffusion barriers are typically used to prevent interaction of the lanthanides with the cladding. A more active method has been proposed which immobilizes the lanthanides through formation of stable compounds with an additive. Theoretical analysis showed that indium, thallium, and antimony are good candidates. Indium was the strongest candidate because of its low reactivity with iron-based cladding alloys. Characterization of the as-fabricated alloys wasmore » performed to determine the effectiveness of the indium addition in forming compounds with lanthanides, represented by cerium. Tests to examine how effectively the dopant prevents lanthanide migration under a thermal gradient were also performed. The results showed that indium effectively prevented cerium migration.« less
Reduced turning frequency and delayed poultry manure addition reduces N loss from sugarcane compost.

PubMed

Bryndum, S; Muschler, R; Nigussie, A; Magid, J; de Neergaard, A

2017-07-01

Composting is an effective method to recycle biodegradable waste as soil amendment in smallholder farming systems. Although all essential plant nutrients are found in compost, a substantial amount of nitrogen is lost during composting. This study therefore investigated the potential of reducing N losses by (i) delaying the addition of nitrogen-rich substrates (i.e. poultry manure), and (ii) reducing the turning frequency during composting. Furthermore, we tested the effect of compost application method on nitrogen mineralization. Sugarcane-waste was composted for 54days with addition of poultry manure at the beginning (i.e. early addition) or after 21days of composting (delayed addition). The compost pile was then turned either every three or nine days. Composts were subsequently applied to soil as (i) homogeneously mixed, or (ii) stratified, and incubated for 28days to test the effect of compost application on nitrogen mineralization. The results showed that delayed addition of poultry manure reduced total nitrogen loss by 33% and increased mineral nitrogen content by >200% compared with early addition. Similarly, less frequent turning reduced total N loss by 12% compared with frequent turning. Stratified placement of compost did not enhance N mineralization compared to a homogeneous mixing. Our results suggested that simple modifications of the composting process (i.e. delayed addition and/or turning frequency) could significantly reduce N losses and improve the plant-nutritional value of compost. Copyright © 2017 Elsevier Ltd. All rights reserved.
Addressing Informatics Barriers to Conducting Observational Comparative Effectiveness Research: A Comparative Case Analysis

ERIC Educational Resources Information Center

Boone, Christopher P. D.

2013-01-01

Background: The U.S. health care system has been under immense scrutiny for ever-increasing costs and poor health outcomes for its patients. Comparative Effectiveness Research (CER) has emerged as a generally accepted practice by providers, policy makers, and scientists as an approach to identify the most clinical- and cost-effective interventions…
Effects of Litter and Nutrient Additions on Soil Carbon Cycling in a Tropical Forest

NASA Astrophysics Data System (ADS)

Cusack, D. F.; Halterman, S.; Turner, B. L.; Tanner, E.; Wright, S. J.

2014-12-01

Soil carbon (C) dynamics present one of the largest sources of uncertainty in global C cycle models, with tropical forest soils containing some of the largest terrestrial C stocks. Drastic changes in soil C storage and loss are likely to occur if global change alters plant net primary production (NPP) and/or nutrient availability in these ecosystems. We assessed the effects of litter removal and addition, as well as fertilization with nitrogen (N), phosphorus (P), and/or potassium (K), on soil C stocks in a tropical seasonal forest in Panama after ten and sixteen years, respectively. We used a density fractionation scheme to assess manipulation effects on rapidly and slowly cycling pools of C. Soil samples were collected in the wet and dry seasons from 0-5 cm and 5-10 cm depths in 15- 45x45 m plots with litter removal, 2x litter addition, and control (n=5), and from 32- 40x40 m fertilization plots with factorial additions of N, P, and K. We hypothesized that litter addition would increase all soil C fractions, but that the magnitude of the effect on rapidly-cycling C would be dampened by a fertilization effect. Results for the dry season show that the "free light" C fraction, or rapidly cycling soil C pool, was significantly different among the three litter treatments, comprising 5.1 ± 0.9 % of total soil mass in the litter addition plots, 2.7 ± 0.3 % in control plots, and 1.0 ± 0.1 % in litter removal plots at the 0-5cm depth (means ± one standard error, p < 0.05). Bulk soil C results are similar to observed changes in the rapidly cycling C pool for the litter addition and removal. Fertilization treatments on average diminished this C pool size relative to control plots, although there was substantial variability among fertilization treatments. In particular, addition of N and P together did not significantly alter rapidly cycling C pool sizes (4.1 ± 1.2 % of total soil mass) relative to controls (3.5 ± 0.4 %), whereas addition of P alone resulted in
Effect of mineral additives on structure and properties of concrete for pavements

NASA Astrophysics Data System (ADS)

Sobol, Khrystyna; Markiv, Taras; Hunyak, Oleksii

2017-12-01

Concrete pavements is an attractive alternative to asphalt pavements because of its lower cost and higher durability. Major contribution to sustainable development can be made by partial replacement of cement in concrete pavement with supplementary cementitious materials of different nature and origin. In this paper, the effect of natural zeolite and perlite additives in complex with chemical admixtures on the structure and properties of concrete for pavement was studied. Compressive and flexural strength test was used to study the mechanical behavior of designed concrete under load. Generally, the compressive strength of both control concrete and concrete containing mineral additives levels at the later ages of hardening. The microstructure analysis of concrete with mineral additives of different nature activity showed the formation of additional amount of hydration products such as tobermorite type calcium hydrosilicate which provide self-reinforcement of hardening concrete system.
Cytotoxic Effects of Temozolomide and Radiation are Additive- and Schedule-Dependent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chalmers, Anthony J., E-mail: a.j.chalmers@sussex.ac.u; Genome Damage and Stability Centre, University of Sussex, Falmer; Ruff, Elliot M.

2009-12-01

Purpose: Despite aggressive therapy comprising radical radiation and temozolomide (TMZ) chemotherapy, the prognosis for patients with glioblastoma multiforme (GBM) remains poor, particularly if tumors express O{sup 6}-methylguanine-DNA-methyltransferase (MGMT). The interactions between radiation and TMZ remain unclear and have important implications for scheduling and for developing strategies to improve outcomes. Methods and Materials: Factors determining the effects of combination therapy on clonogenic survival, cell-cycle checkpoint signaling and DNA repair were investigated in four human glioma cell lines (T98G, U373-MG, UVW, U87-MG). Results: Combining TMZ and radiation yielded additive cytotoxicity, but only when TMZ was delivered 72 h before radiation. Radiosensitization wasmore » not observed. TMZ induced G2/M cell-cycle arrest at 48-72 h, coincident with phosphorylation of Chk1 and Chk2. Additive G2/M arrest and Chk1/Chk2 phosphorylation was only observed when TMZ preceded radiation by 72 h. The ataxia-telangiectasia mutated (ATM) inhibitor KU-55933 increased radiation sensitivity and delayed repair of radiation-induced DNA breaks, but did not influence TMZ effects. The multiple kinase inhibitor caffeine enhanced the cytotoxicity of chemoradiation and exacerbated DNA damage. Conclusions: TMZ is not a radiosensitizing agent but yields additive cytotoxicity in combination with radiation. Our data indicate that TMZ treatment should commence at least 3 days before radiation to achieve maximum benefit. Activation of G2/M checkpoint signaling by TMZ and radiation has a cytoprotective effect that can be overcome by dual inhibition of ATM and ATR. More specific inhibition of checkpoint signaling will be required to increase treatment efficacy without exacerbating toxicity.« less
Effect of povidone-iodine addition on the corrosion behavior of cp-Ti in normal saline.

PubMed

Bhola, Rahul; Bhola, Shaily M; Mishra, Brajendra; Olson, David L

2010-05-01

The effect of various concentrations of povidone-iodine (PI) on the corrosion behavior of a commercially pure titanium alloy (Ti-1) has been investigated in normal saline solution to simulate the povidone-iodine addition in an oral environment. The open circuit potential, electrochemical impedance spectroscopy and potentiodynamic polarization measurements have been used to characterize the electrochemical phenomena occurring on the alloy surface. The open circuit potential values for Ti-1 in various concentrations of PI shift considerably towards noble direction as compared to pure normal saline. In the potentiodynamic polarization curve for Ti-1 in various solutions, the cathodic current density has increased for all concentrations of PI and the anodic current density has decreased. Only the 0.1% PI concentration is able to inhibit corrosion of Ti-1 in normal saline and the other higher concentrations studied, accelerate corrosion. The EIS data for Ti-1 in normal saline and in various concentrations of PI follows a one time constant circuit, suggesting the formation of a single passive film on Ti-1 which is not altered by the addition of PI to normal saline.
Prioritization in comparative effectiveness research: the CANCERGEN Experience.

PubMed

Thariani, Rahber; Wong, William; Carlson, Josh J; Garrison, Louis; Ramsey, Scott; Deverka, Patricia A; Esmail, Laura; Rangarao, Sneha; Hoban, Carolyn J; Baker, Laurence H; Veenstra, David L

2012-05-01

Systematic approaches to stakeholder-informed research prioritization are a central focus of comparative effectiveness research. Genomic testing in cancer is an ideal area to refine such approaches given rapid innovation and potentially significant impacts on patient outcomes. To develop and pilot test a stakeholder-informed approach to prioritizing genomic tests for future study in collaboration with the cancer clinical trials consortium SWOG. We conducted a landscape analysis to identify genomic tests in oncology using a systematic search of published and unpublished studies, and expert consultation. Clinically valid tests suitable for evaluation in a comparative study were presented to an external stakeholder group. Domains to guide the prioritization process were identified with stakeholder input, and stakeholders ranked tests using multiple voting rounds. A stakeholder group was created including representatives from patient-advocacy groups, payers, test developers, regulators, policy makers, and community-based oncologists. We identified 9 domains for research prioritization with stakeholder feedback: population impact; current standard of care, strength of association; potential clinical benefits, potential clinical harms, economic impacts, evidence of need, trial feasibility, and market factors. The landscape analysis identified 635 studies; of 9 tests deemed to have sufficient clinical validity, 6 were presented to stakeholders. Two tests in lung cancer (ERCC1 and EGFR) and 1 test in breast cancer (CEA/CA15-3/CA27.29) were identified as top research priorities. Use of a diverse stakeholder group to inform research prioritization is feasible in a pragmatic and timely manner. Additional research is needed to optimize search strategies, stakeholder group composition, and integration with existing prioritization mechanisms.
Independent effects of warming and nitrogen addition on plant phenology in the Inner Mongolian steppe

PubMed Central

Xia, Jianyang; Wan, Shiqiang

2013-01-01

Background and Aims Phenology is one of most sensitive traits of plants in response to regional climate warming. Better understanding of the interactive effects between warming and other environmental change factors, such as increasing atmosphere nitrogen (N) deposition, is critical for projection of future plant phenology. Methods A 4-year field experiment manipulating temperature and N has been conducted in a temperate steppe in northern China. Phenology, including flowering and fruiting date as well as reproductive duration, of eight plant species was monitored and calculated from 2006 to 2009. Key Results Across all the species and years, warming significantly advanced flowering and fruiting time by 0·64 and 0·72 d per season, respectively, which were mainly driven by the earliest species (Potentilla acaulis). Although N addition showed no impact on phenological times across the eight species, it significantly delayed flowering time of Heteropappus altaicus and fruiting time of Agropyron cristatum. The responses of flowering and fruiting times to warming or N addition are coupled, leading to no response of reproductive duration to warming or N addition for most species. Warming shortened reproductive duration of Potentilla bifurca but extended that of Allium bidentatum, whereas N addition shortened that of A. bidentatum. No interactive effect between warming and N addition was found on any phenological event. Such additive effects could be ascribed to the species-specific responses of plant phenology to warming and N addition. Conclusions The results suggest that the warming response of plant phenology is larger in earlier than later flowering species in temperate grassland systems. The effects of warming and N addition on plant phenology are independent of each other. These findings can help to better understand and predict the response of plant phenology to climate warming concurrent with other global change driving factors. PMID:23585496
Independent effects of warming and nitrogen addition on plant phenology in the Inner Mongolian steppe.

PubMed

Xia, Jianyang; Wan, Shiqiang

2013-06-01

Phenology is one of most sensitive traits of plants in response to regional climate warming. Better understanding of the interactive effects between warming and other environmental change factors, such as increasing atmosphere nitrogen (N) deposition, is critical for projection of future plant phenology. A 4-year field experiment manipulating temperature and N has been conducted in a temperate steppe in northern China. Phenology, including flowering and fruiting date as well as reproductive duration, of eight plant species was monitored and calculated from 2006 to 2009. Across all the species and years, warming significantly advanced flowering and fruiting time by 0·64 and 0·72 d per season, respectively, which were mainly driven by the earliest species (Potentilla acaulis). Although N addition showed no impact on phenological times across the eight species, it significantly delayed flowering time of Heteropappus altaicus and fruiting time of Agropyron cristatum. The responses of flowering and fruiting times to warming or N addition are coupled, leading to no response of reproductive duration to warming or N addition for most species. Warming shortened reproductive duration of Potentilla bifurca but extended that of Allium bidentatum, whereas N addition shortened that of A. bidentatum. No interactive effect between warming and N addition was found on any phenological event. Such additive effects could be ascribed to the species-specific responses of plant phenology to warming and N addition. The results suggest that the warming response of plant phenology is larger in earlier than later flowering species in temperate grassland systems. The effects of warming and N addition on plant phenology are independent of each other. These findings can help to better understand and predict the response of plant phenology to climate warming concurrent with other global change driving factors.
[Effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and additional effort: focused on the mediating effects of leader trust and value congruence].

PubMed

Han, Sang Sook; Kim, Nam Eun

2012-02-01

This study was done to examine the effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and promoting additional effort. The focus was the mediating effects of leader trust and value congruence. Data were collected from 361 RN-BSN students and nurses participating in nationally attended in-service training programs. Data were analyzed using descriptive statistics and structural analysis with SPSS 17.0 windows program and Amos 7.0. Direct effects of nurses' perception of servant leadership were negative, but mediating effects of trust and value congruency were positively correlated with leader effectiveness, satisfaction and additional effort, that is servant leadership should be effective through mediating factors. The study results indicate that if the middle managers of nurses can build leader trust and value congruency between nurses through servant leadership, leader effectiveness, satisfaction and additional effort on the part of the nurses could result in a positive change in the long term.
Additive effects of physical stress and herbivores on intertidal seaweed biodiversity.

PubMed

Williams, Susan L; Bracken, Matthew E S; Jones, Emily

2013-05-01

Patterns in rocky intertidal seaweed biodiversity influence the resilience and functioning of these important primary producer communities. In turn, seaweed biodiversity patterns are the result of many ecological factors. We determined the influences of thermal and desiccation stress, herbivory, and nutrients on seaweed biodiversity on a northern California rocky shoreline. In a fully crossed design at two tidal heights at wave-protected and exposed sites, we deployed screens to reduce stress, removed herbivores, and added nutrients for 18 months. The treatments reduced temperature, increased relative humidity, decreased herbivore abundances, and increased nitrogen in both seawater and seaweeds. Seaweed abundance and biodiversity (cover, biomass, species richness, diversity, evenness, and community composition) were influenced by tidal height, physical stress, and herbivores. Wave exposure affected all response variables except biomass and evenness. Stress and herbivores had independent additive effects on seaweed abundance and diversity. Physical stress did not make the community as a whole more susceptible to herbivores, and screens had overarching positive effects on seaweed biodiversity even though they also had positive effects on herbivore abundance. Nutrients had virtually no effect on seaweed biodiversity, and we observed no bottom-up effects of nutrient addition on herbivore density or biomass. Small green algae and diatoms were important contributors to overall algal cover and to changes in composition across treatments, but larger macroalgae dominated the species richness response. The striking absence of interactions between stress and herbivory highlights how seaweed communities can respond independently to important drivers of biodiversity. Thus, nonadditive, potentially synergistic effects do not necessarily complicate the understanding of how seaweed biodiversity responds to environmental change.
Additional Language Teaching within the International Baccalaureate Primary Years Programme: A Comparative Study

ERIC Educational Resources Information Center

Lebreton, Marlène

2014-01-01

The International Baccalaureate Primary Years Programme supports the learning of languages and cultures, but the role of the additional language within this programme is often unclear. There remains a great variability in schools regarding the frequency of lessons and the way that the additional language is taught within the Primary Years…

The effect of alum addition on microbial communities in poultry litter.

PubMed

Rothrock, M J; Cook, K L; Warren, J G; Sistani, K

2008-08-01

Alum [Al(2)(SO(4))(3).14H(2)O] is a common poultry litter amendment used to decrease water-soluble phosphorus or reduce ammonia volatilization, or both. Although the physiochemical effects of alum addition have been well researched, little attention has been given to the poultry litter microbial communities. The goal of this study was to use molecular biological methods [denaturing gradient gel electrophoresis (DGGE), community cloning, and quantitative real-time PCR] to characterize general, group-specific and pathogenic microbial communities in alum (10% wt/wt) and non-alum-treated litter. According to quantitative real-time PCR analyses, alum addition to the poultry litter resulted in significant reductions in both Campylobacter jejuni and Escherichia coli concentrations by the end of the first month of the experiment (3 log and 2 log, respectively). The concentrations of Salmonella spp. were below detection (<5 x 10(3) cell.g(-1) of litter) for the entire experiment. The DGGE analyses revealed significant reductions in the Clostridium/Eubacterium and low %GC gram-positive groups in the alum-treated litters by the end of the first month, with no bands detectable for either group after 8 wk of incubation. Conversely, minimal effects of alum addition were observed in the Actinomycetes community. The most significant shift in the microbial community (based on DGGE analyses) occurred in the fungal population, with a large increase in diversity and abundance within 1 mo of alum addition (1 dominant band on d 0 to 9 dominant bands at 4 wk). Specifically, the incidence of Aspergillus spp. increased from 0 to 50% of the sequences in fungal clone libraries (n = 80) over the course of the experiment. This suggests that the addition of alum to poultry litter potentially shifts the microbial populations from bacterially dominated to dominated by fungi. The ramifications of this shift in dominance are still unknown, and future work will be aimed at characterizing these fungi
Ameliorative effect of a microbial feed additive on infectious bronchitis virus antibody titer and stress index in broiler chicks fed deoxynivalenol.

PubMed

Ghareeb, K; Awad, W A; Böhm, J

2012-04-01

Although acute mycotoxicoses are rare in poultry production, chronic exposure to low levels of mycotoxins is responsible for reduced productivity and increased susceptibility to infectious diseases. Deoxynivalenol (DON) is known to modulate immune function, but only a few studies have investigated the effect of DON on the vaccinal immune response. In addition, the effects of Mycofix select (Biomin GmbH, Herzogenburg, Austria) supplementation to DON-contaminated broiler diets have not yet been demonstrated. Therefore, an experiment with 1-d-old male broilers (Ross 308) was carried out to examine the effects of feeding DON-contaminated low-protein grower diets on performance, serum biochemical parameters, lymphoid organ weight, and antibody titers to infectious bronchitis vaccination in serum and to evaluate the effects of Mycofix select dietary supplementation in either the presence or absence of DON in broilers. In total, thirty-two 1-d-old broiler chicks were randomly assigned to 1 of the 4 dietary treatments for 5 wk. The dietary treatments were 1) control; 2) artificially contaminated diets with 10 mg of DON/kg of diet; 3) DON-contaminated diets supplemented with Mycofix select; and 4) control diet supplemented with Mycofix select. Feeding of contaminated diets decreased (P = 0.000) the feed intake, BW (P = 0.001), BW gain (P = 0.044), and feed efficiency during the grower phase. Deoxynivalenol affected the blood biochemistry, whereas plasma total protein and uric acid concentrations in birds fed contaminated grains were decreased compared with those of the controls. Moreover, in birds fed contaminated feeds, there was a tendency to reduce triglycerides in the plasma (P = 0.090), suggesting that DON in the diets affected protein and lipid metabolism in broiler chickens. The feeding of contaminated diets altered the immune response in broilers by reducing the total lymphocyte count. Similarly, the antibody response against infectious bronchitis vaccination
Psychological impact of screening for type 2 diabetes: controlled trial and comparative study embedded in the ADDITION (Cambridge) randomised controlled trial.

PubMed

Eborall, Helen C; Griffin, Simon J; Prevost, A Toby; Kinmonth, Ann-Louise; French, David P; Sutton, Stephen

2007-09-08

To quantify the psychological impact of primary care based stepwise screening for type 2 diabetes. Controlled trial and comparative study embedded in a randomised controlled trial. 15 practices (10 screening, five control) in the ADDITION (Cambridge) trial in the east of England. 7380 adults (aged 40-69) in the top fourth for risk of having undiagnosed type 2 diabetes (6416 invited for screening, 964 controls). Invited for screening for type 2 diabetes or not invited (controls), incorporating a comparative study of subgroups of screening attenders. Attenders completed questionnaires after a random blood glucose test and at 3-6 months and 12-15 months later. Controls were sent questionnaires at corresponding time points. Non-attenders were sent questionnaires at 3-6 months and 12-15 months. State anxiety (Spielberger state anxiety inventory), anxiety and depression (hospital anxiety and depression scale), worry about diabetes, and self rated health. No significant differences were found between the screening and control participants at any time-for example, difference in means (95% confidence intervals) for state anxiety after the initial blood glucose test was -0.53, -2.60 to 1.54, at 3-6 months was 1.51 (-0.17 to 3.20), and at 12-15 months was 0.57, -1.11 to 2.24. After the initial test, compared with participants who screened negative, those who screened positive reported significantly poorer general health (difference in means -0.19, -0.25 to -0.13), higher state anxiety (0.93, -0.02 to 1.88), higher depression (0.32, 0.08 to 0.56), and higher worry about diabetes (0.25, 0.09 to 0.41), although effect sizes were small. Small but significant trends were found for self rated health across the screening subgroups at 3-6 months (P=0.047) and for worry about diabetes across the screen negative groups at 3-6 months and 12-15 months (P=0.001). Screening for type 2 diabetes has limited psychological impact on patients. Implementing a national screening programme based
Widespread non-additive and interaction effects within HLA loci modulate the risk of autoimmune diseases

PubMed Central

Lenz, Tobias L.; Deutsch, Aaron J.; Han, Buhm; Hu, Xinli; Okada, Yukinori; Eyre, Stephen; Knapp, Michael; Zhernakova, Alexandra; Huizinga, Tom W.J.; Abecasis, Goncalo; Becker, Jessica; Boeckxstaens, Guy E.; Chen, Wei-Min; Franke, Andre; Gladman, Dafna D.; Gockel, Ines; Gutierrez-Achury, Javier; Martin, Javier; Nair, Rajan P.; Nöthen, Markus M.; Onengut-Gumuscu, Suna; Rahman, Proton; Rantapää-Dahlqvist, Solbritt; Stuart, Philip E.; Tsoi, Lam C.; Van Heel, David A.; Worthington, Jane; Wouters, Mira M.; Klareskog, Lars; Elder, James T.; Gregersen, Peter K.; Schumacher, Johannes; Rich, Stephen S.; Wijmenga, Cisca; Sunyaev, Shamil R.; de Bakker, Paul I.W.; Raychaudhuri, Soumya

2015-01-01

Human leukocyte antigen (HLA) genes confer strong risk for autoimmune diseases on a log-additive scale. Here we speculated that differences in autoantigen binding repertoires between a heterozygote’s two expressed HLA variants may result in additional non-additive risk effects. We tested non-additive disease contributions of classical HLA alleles in patients and matched controls for five common autoimmune diseases: rheumatoid arthritis (RA, Ncases=5,337), type 1 diabetes (T1D, Ncases=5,567), psoriasis vulgaris (Ncases=3,089), idiopathic achalasia (Ncases=727), and celiac disease (Ncases=11,115). In four out of five diseases, we observed highly significant non-additive dominance effects (RA: P=2.5×1012; T1D: P=2.4×10−10; psoriasis: P=5.9×10−6; celiac disease: P=1.2×10−87). In three of these diseases, the dominance effects were explained by interactions between specific classical HLA alleles (RA: P=1.8×10−3; T1D: P=8.6×1027; celiac disease: P=6.0×10−100). These interactions generally increased disease risk and explained moderate but significant fractions of phenotypic variance (RA: 1.4%, T1D: 4.0%, and celiac disease: 4.1%, beyond a simple additive model). PMID:26258845
Effect of adsorbent addition on floc formation and clarification.

PubMed

Younker, Jessica M; Walsh, Margaret E

2016-07-01

Adding adsorbent into the coagulation process is an emerging treatment solution for targeting hard-to-remove dissolved organic compounds from both drinking water and industrial wastewater. The impact of adding powdered activated carbon (PAC) or organoclay (OC) adsorbents with ferric chloride (FeCl3) coagulant was investigated in terms of potential changes to the coagulated flocs formed with respect to size, structure, and breakage and regrowth properties. The ability of dissolved air flotation (DAF) and sedimentation (SED) clarification processes to remove hybrid adsorbent-coagulant flocs was also evaluated through clarified water quality analysis of samples collected in bench-scale jar test experiments. The jar tests were conducted using both a synthetic fresh water and oily wastewater test water spiked with dissolved aromatic compounds phenol and naphthalene. Results of the study demonstrated that addition of adsorbent reduced the median coagulated floc size by up to 50% but did not affect floc strength or regrowth potential after application of high shear. Experimental results in fresh water demonstrated that sedimentation was more effective than DAF for clarification of both FeCl3-PAC and FeCl3-OC floc aggregates. However, experimental tests performed on the synthetic oily wastewater showed that coagulant-adsorbent floc aggregates were effectively removed with both DAF and sedimentation treatment, with lower residual turbidity achieved in clarified water samples than with coagulation treatment alone. Addition of OC or PAC into the coagulation process resulted in removals of over half, or nearly all of the dissolved aromatics, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.
Cost-effectiveness of supervised exercise therapy compared with endovascular revascularization for intermittent claudication.

PubMed

van den Houten, M M L; Lauret, G J; Fakhry, F; Fokkenrood, H J P; van Asselt, A D I; Hunink, M G M; Teijink, J A W

2016-11-01

Current guidelines recommend supervised exercise therapy (SET) as the preferred initial treatment for patients with intermittent claudication. The availability of SET programmes is, however, limited and such programmes are often not reimbursed. Evidence for the long-term cost-effectiveness of SET compared with endovascular revascularization (ER) as primary treatment for intermittent claudication might aid widespread adoption in clinical practice. A Markov model was constructed to determine the incremental costs, incremental quality-adjusted life-years (QALYs) and incremental cost-effectiveness ratio of SET versus ER for a hypothetical cohort of patients with newly diagnosed intermittent claudication, from the Dutch healthcare payer's perspective. In the event of primary treatment failure, possible secondary interventions were repeat ER, open revascularization or major amputation. Data sources for model parameters included original data from two RCTs, as well as evidence from the medical literature. The robustness of the results was tested with probabilistic and one-way sensitivity analysis. Considering a 5-year time horizon, probabilistic sensitivity analysis revealed that SET was associated with cost savings compared with ER (-€6412, 95 per cent credibility interval (CrI) -€11 874 to -€1939). The mean difference in effectiveness was -0·07 (95 per cent CrI -0·27 to 0·16) QALYs. ER was associated with an additional €91 600 per QALY gained compared with SET. One-way sensitivity analysis indicated more favourable cost-effectiveness for ER in subsets of patients with low quality-of-life scores at baseline. SET is a more cost-effective primary treatment for intermittent claudication than ER. These results support implementation of supervised exercise programmes in clinical practice. © 2016 BJS Society Ltd Published by John Wiley & Sons Ltd.
Co-digestion of manure and industrial waste--The effects of trace element addition.

PubMed

Nordell, Erik; Nilsson, Britt; Nilsson Påledal, Sören; Karisalmi, Kaisa; Moestedt, Jan

2016-01-01

Manure is one of the most common substrates for biogas production. Manure from dairy- and swine animals are often considered to stabilize the biogas process by contributing nutrients and trace elements needed for the biogas process. In this study two lab-scale reactors were used to evaluate the effects of trace element addition during co-digestion of manure from swine- and dairy animals with industrial waste. The substrate used contained high background concentrations of both cobalt and nickel, which are considered to be the most important trace elements. In the reactor receiving additional trace elements, the volatile fatty acids (VFA) concentration was 89% lower than in the control reactor. The lower VFA concentration contributed to a more digested digestate, and thus lower methane emissions in the subsequent storage. Also, the biogas production rate increased with 24% and the biogas production yield with 10%, both as a result of the additional trace elements at high organic loading rates. All in all, even though 50% of the feedstock consisted of manure, trace element addition resulted in multiple positive effects and a more reliable process with stable and high yield. Copyright © 2015 Elsevier Ltd. All rights reserved.
EMOTIONAL AVAILABILITY IN MOTHER-CHILD INTERACTION: THE EFFECTS OF MATERNAL DEPRESSION IN REMISSION AND ADDITIONAL HISTORY OF CHILDHOOD ABUSE.

PubMed

Kluczniok, Dorothea; Boedeker, Katja; Fuchs, Anna; Hindi Attar, Catherine; Fydrich, Thomas; Fuehrer, Daniel; Dittrich, Katja; Reck, Corinna; Winter, Sibylle; Heinz, Andreas; Herpertz, Sabine C; Brunner, Romuald; Bermpohl, Felix

2016-07-01

The association between maternal depression and adverse outcomes in children is well established. Similar links have been found for maternal childhood abuse. One proposed pathway of risk transmission is reduced maternal emotional availability. Our aim was to investigate whether sensitive parenting is impaired in mothers with depression in remission, and whether among these mothers childhood abuse has an additional impact. The mother-child interaction of 188 dyads was assessed during a play situation using the Emotional Availability Scales, which measure the overall affective quality of the interaction: maternal sensitivity, structuring, nonhostility, and nonintrusiveness. Mothers with depression in remission were compared to healthy mothers. Children were between 5 and 12 years old. Group differences and impact of additional childhood abuse were analyzed by one-factorial analyses of covariance and planned contrasts. Mothers with depression in remission showed less emotional availability during mother-child interaction compared to healthy control mothers. Specifically, they were less sensitive and, at trend-level, less structuring and more hostile. Among these mothers, we found an additional effect of severe maternal childhood abuse on maternal sensitivity: Mothers with depression in remission and a history of severe childhood abuse were less sensitive than remitted mothers without childhood abuse. Our data suggest that depression impacts on maternal emotional availability during remission, which might represent a trait characteristic of depression. Mothers with depression in remission and additional severe childhood abuse were particularly affected. These findings may contribute to the understanding of children's vulnerability to develop a depressive disorder themselves. © 2015 Wiley Periodicals, Inc.
Effects of In and Ni Addition on Microstructure of Sn-58Bi Solder Joint

NASA Astrophysics Data System (ADS)

Mokhtari, Omid; Nishikawa, Hiroshi

2014-11-01

In this study, the effect of adding 0.5 wt.% and 1 wt.% In and Ni to Sn-58Bi solder on intermetallic compound (IMC) layers at the interface and the microstructure of the solder alloys were investigated during reflow and thermal aging by scanning electron microscopy and electron probe micro-analysis. The results showed that the addition of minor elements was not effective in suppressing the IMC growth during the reflow; however, the addition of 0.5 wt.% In and Ni was effective in suppressing the IMC layer growth during thermal aging. The thickening kinetics of the total IMC layer was analyzed by plotting the mean thickness versus the aging time on log-log coordinates, and the results showed the transition point from grain boundary diffusion control to a volume diffusion control mechanism. The results also showed that the minor addition of In can significantly suppress the coarsening of the Bi phase.
Effect of Mg or Ag addition on the evaporation field of Al.

PubMed

Aruga, Yasuhiro; Nako, Hidenori; Tsuneishi, Hidemasa; Hasegawa, Yuki; Tao, Hiroaki; Ichihara, Chikara; Serizawa, Ai

2013-09-01

It is known that the distribution of the charge-states as well as the evaporation field shift to higher values as the specimen temperature is decreased at a constant rate of evaporation. This study has explored the effect of Mg or Ag addition on the evaporation field of Al in terms of the charge state distribution of the field evaporated Al ions. The fractional abundance of Al(2+) ions with respect to the total Al ions in Al-Mg alloy is lower than that in pure Al, whereas it shows higher level in the Al-Ag alloy at lower temperatures. The temperature dependence of the fractional abundance of Al(2+) ions has been also confirmed, suggesting that Al atoms in the Al-Mg alloy need lower evaporation field, while higher field is necessary to evaporate Al atoms in the Al-Ag alloy, compared with pure Al. This tendency is in agreement with that of the evaporation fields estimated theoretically by means of measurements of the work function and calculations of the binding energy of the pure Al, Al-Mg and Al-Ag alloys. Copyright © 2012 Elsevier B.V. All rights reserved.
Quaternion normalization in additive EKF for spacecraft attitude determination

NASA Technical Reports Server (NTRS)

Bar-Itzhack, I. Y.; Deutschmann, J.; Markley, F. L.

1991-01-01

This work introduces, examines, and compares several quaternion normalization algorithms, which are shown to be an effective stage in the application of the additive extended Kalman filter (EKF) to spacecraft attitude determination, which is based on vector measurements. Two new normalization schemes are introduced. They are compared with one another and with the known brute force normalization scheme, and their efficiency is examined. Simulated satellite data are used to demonstrate the performance of all three schemes. A fourth scheme is suggested for future research. Although the schemes were tested for spacecraft attitude determination, the conclusions are general and hold for attitude determination of any three dimensional body when based on vector measurements, and use an additive EKF for estimation, and the quaternion for specifying the attitude.
Effect of phosphate group addition on the properties of denture base resins

PubMed Central

Puri, Gaurav; Berzins, David W.; Dhuru, Virendra B.; Raj, Periathamby A.; Rambhia, Sameer K.; Dhir, Gunjan; Dentino, Andrew R.

2009-01-01

Statement of problem Acrylic resins are prone to microbial adherence, especially by Candida albicans. Surface-charged resins alter the ionic interaction between the denture resin and Candida hyphae, and these resins are being developed as a means to reduce microbial colonization on the denture surface. Purpose The purpose of this study was to investigate the physical and mechanical properties of phosphate-containing polymethyl methacrylate resins for their suitability as a denture material. Material and methods Using PMMA with cross-linker (Lucitone 199) as a control, 4 experimental groups containing various levels of phosphate with and without cross-linker were generated. The properties examined were impact strength, fracture toughness, wettability (contact angle), and resin bonding ability to denture teeth. Impact strength was tested in the Izod configuration (n=16), and fracture toughness (n=13) was measured using the single-edge notched bend test. Wettability was determined by calculating the contact angle of water on the material surface (n=12), while ISO 1567 was used for bonding ability (n=12). The data were analyzed by 1- and 2-way ANOVA (α=.05). Results A trend of increased hydrophilicity, as indicated by lower contact angle, was observed with increased concentrations of phosphate. With regard to the other properties, no significant differences were found when compared with the control acrylic resin. Conclusions No adverse physical effect due to the addition of a phosphate-containing monomer was found in the acrylic denture resins. Additional mechanical and physical properties, biocompatibility, and clinical efficacy studies are needed to confirm the in vivo anti-Candida activity of these novel resins. PMID:18922259
Implementation of the Realized Genomic Relationship Matrix to Open-Pollinated White Spruce Family Testing for Disentangling Additive from Nonadditive Genetic Effects

PubMed Central

Gamal El-Dien, Omnia; Ratcliffe, Blaise; Klápště, Jaroslav; Porth, Ilga; Chen, Charles; El-Kassaby, Yousry A.

2016-01-01

The open-pollinated (OP) family testing combines the simplest known progeny evaluation and quantitative genetics analyses as candidates’ offspring are assumed to represent independent half-sib families. The accuracy of genetic parameter estimates is often questioned as the assumption of “half-sibling” in OP families may often be violated. We compared the pedigree- vs. marker-based genetic models by analysing 22-yr height and 30-yr wood density for 214 white spruce [Picea glauca (Moench) Voss] OP families represented by 1694 individuals growing on one site in Quebec, Canada. Assuming half-sibling, the pedigree-based model was limited to estimating the additive genetic variances which, in turn, were grossly overestimated as they were confounded by very minor dominance and major additive-by-additive epistatic genetic variances. In contrast, the implemented genomic pairwise realized relationship models allowed the disentanglement of additive from all nonadditive factors through genetic variance decomposition. The marker-based models produced more realistic narrow-sense heritability estimates and, for the first time, allowed estimating the dominance and epistatic genetic variances from OP testing. In addition, the genomic models showed better prediction accuracies compared to pedigree models and were able to predict individual breeding values for new individuals from untested families, which was not possible using the pedigree-based model. Clearly, the use of marker-based relationship approach is effective in estimating the quantitative genetic parameters of complex traits even under simple and shallow pedigree structure. PMID:26801647
Effect of treatment with probiotics as water additives on tilapia (Oreochromis niloticus) growth performance and immune response.

PubMed

Zhou, Xuxia; Tian, Ziqiang; Wang, Yanbo; Li, Weifen

2010-09-01

A feeding trial was conducted for 40 days to delineate the effect of treatment with probiotics as water additives on tilapia (Oreochromis niloticus) growth performance and immune response. About 360 juveniles were randomly distributed into four treatment groups, each with three replicates. Different probiotics (T-1, Bacillus subtilis B10; T-2, Bacillus coagulans B16; T-3, Rhodopseudomonas palustris G06) were added to the water of tanks at final concentration of 1 x 10(7) cfu ml(-1) every 2 days, with no probiotic added to control tanks. At the end of the feeding trial, fish treated with B. coagulans B16 (T-2) and R. palustris G06 (T-3) had significantly (P < 0.05) higher final weight, daily weight gain, and specific growth rate compared with those treated with B. subtilis B10 (T-1) and those without probiotics (control). The highest (P < 0.05) content of total serum protein was found in T-2 compared with that in T-1, T-3, and the control. However, albumin concentration and albumin/globulin ratio were not affected by the probiotics treatments. Compared with the control, probiotic supplementation remarkably improved activities of superoxide dismutase and catalase (P < 0.05). T-2 fish exhibited higher average myeloperoxidase activity than the control, T-1, and T-3 groups. Regarding serum lysozyme content in tilapia, assays showed no difference (P > 0.05) among the treatment groups. Furthermore, probiotics treatments remarkably increased respiratory burst activity compared with control, with T-2 showing higher values than T-1 and T-3. This indicated that treatment with probiotics, B. coagulans B16 and R. palustris G06, as water additives could be used to enhance immune and health status, thereby improving growth performance of O. niloticus.
Effect of lithium salts addition on the ionic liquid based extraction of essential oil from Farfarae Flos.

PubMed

Li, Zhen-Yu; Zhang, Sha-Sha; Jie-Xing; Qin, Xue-Mei

2015-01-01

In this study, an ionic liquids (ILs) based extraction approach has been successfully applied to the extraction of essential oil from Farfarae Flos, and the effect of lithium chloride was also investigated. The results indicated that the oil yields can be increased by the ILs, and the extraction time can be reduced significantly (from 4h to 2h), compared with the conventional water distillation. The addition of lithium chloride showed different effect according to the structures of ILs, and the oil yields may be related with the structure of cation, while the chemical compositions of essential oil may be related with the anion. The reduction of extraction time and remarkable higher efficiency (5.41-62.17% improved) by combination of lithium salt and proper ILs supports the suitability of the proposed approach. Copyright © 2014 Elsevier B.V. All rights reserved.
First- and Second-Line Bevacizumab in Addition to Chemotherapy for Metastatic Colorectal Cancer: A United States–Based Cost-Effectiveness Analysis

PubMed Central

Goldstein, Daniel A.; Chen, Qiushi; Ayer, Turgay; Howard, David H.; Lipscomb, Joseph; El-Rayes, Bassel F.; Flowers, Christopher R.

2015-01-01

Purpose The addition of bevacizumab to fluorouracil-based chemotherapy is a standard of care for previously untreated metastatic colorectal cancer. Continuation of bevacizumab beyond progression is an accepted standard of care based on a 1.4-month increase in median overall survival observed in a randomized trial. No United States–based cost-effectiveness modeling analyses are currently available addressing the use of bevacizumab in metastatic colorectal cancer. Our objective was to determine the cost effectiveness of bevacizumab in the first-line setting and when continued beyond progression from the perspective of US payers. Methods We developed two Markov models to compare the cost and effectiveness of fluorouracil, leucovorin, and oxaliplatin with or without bevacizumab in the first-line treatment and subsequent fluorouracil, leucovorin, and irinotecan with or without bevacizumab in the second-line treatment of metastatic colorectal cancer. Model robustness was addressed by univariable and probabilistic sensitivity analyses. Health outcomes were measured in life-years and quality-adjusted life-years (QALYs). Results Using bevacizumab in first-line therapy provided an additional 0.10 QALYs (0.14 life-years) at a cost of $59,361. The incremental cost-effectiveness ratio was $571,240 per QALY. Continuing bevacizumab beyond progression provided an additional 0.11 QALYs (0.16 life-years) at a cost of $39,209. The incremental cost-effectiveness ratio was $364,083 per QALY. In univariable sensitivity analyses, the variables with the greatest influence on the incremental cost-effectiveness ratio were bevacizumab cost, overall survival, and utility. Conclusion Bevacizumab provides minimal incremental benefit at high incremental cost per QALY in both the first- and second-line settings of metastatic colorectal cancer treatment. PMID:25691669
Comparative Effectiveness of STEMI Regionalization Strategies

PubMed Central

Concannon, Thomas W.; Kent, David M.; Normand, Sharon-Lise; Newhouse, Joseph P.; Griffith, John L.; Cohen, Joshua; Beshansky, Joni R.; Wong, John B.; Aversano, Thomas; Selker, Harry P.

2010-01-01

BACKGROUND Primary percutaneous coronary intervention (PCI) is more effective on average than fibrinolytic therapy (FT) in the treatment of ST-segment elevation myocardial infarction (STEMI). Yet most U.S. hospitals are not equipped for PCI and FT is still widely used. This study evaluated the comparative effectiveness of STEMI regionalization strategies to increase the use of PCI against standard emergency transport and care. METHODS AND RESULTS We estimated incremental treatment costs and quality-adjusted life expectancies of 2,000 patients with STEMI who received PCI or FT in simulations of emergency care in a regional hospital system. To increase access to PCI across the system, we compared a base case strategy to 12 hospital-based strategies of building new PCI labs or extending the hours of existing labs, and one emergency medical services (EMS)-based strategy of transporting all patients with STEMI to existing PCI-capable hospitals. The base case resulted in 609 (569, 647) patients getting PCI. Hospital-based strategies increased the number of patients receiving PCI, the costs of care, and quality-adjusted life years (QALYs) saved, and were cost effective under a variety of conditions. An EMS-based strategy of transporting every patient to an existing PCI facility was less costly and more effective than all hospital expansion options. CONCLUSION Our results suggest that new construction and staffing of PCI labs may not be warranted if an EMS strategy is both available and feasible. PMID:20664025
Does comparative effectiveness research promote rationing of cancer care?

PubMed

Peppercorn, Jeffrey; Zafar, S Yousuf; Houck, Kevin; Ubel, Peter; Meropol, Neal J

2014-03-01

Comparative effectiveness research aims to inform health-care decisions by patients, clinicians, and policy makers. However, questions related to what information is relevant, and how to view the relative attributes of alternative interventions have political, social, and medical considerations. In particular, questions about whether cost is a relevant factor, and whether cost-effectiveness is a desirable or necessary component of such research, have become increasingly controversial as the area has gained prominence. Debate has emerged about whether comparative effectiveness research promotes rationing of cancer care. At the heart of this debate are questions related to the role and limits of patient autonomy, physician discretion in health-care decision making, and the nature of scientific knowledge as an objective good. In this article, we examine the role of comparative effectiveness research in the USA, UK, Canada, and other health-care systems, and the relation between research and policy. As we show, all health systems struggle to balance access to cancer care and control of costs; comparative effectiveness data can clarify choices, but does not itself determine policy or promote rationing of care. Copyright © 2014 Elsevier Ltd. All rights reserved.
Additive naftopidil treatment synergizes docetaxel-induced apoptosis in human prostate cancer cells.

PubMed

Ishii, Kenichiro; Matsuoka, Izumi; Kajiwara, Shinya; Sasaki, Takeshi; Miki, Manabu; Kato, Manabu; Kanda, Hideki; Arima, Kiminobu; Shiraishi, Taizo; Sugimura, Yoshiki

2018-01-01

Docetaxel (DTX) is a standard chemotherapeutic drug for castration-resistant prostate cancer (CRPC), although adverse events are common. To overcome this problem, researchers have evaluated the efficacy of DTX treatment in combination with other drugs. Naftopidil is a tubulin-binding drug with fewer adverse events, implying the usefulness of this drug in clinical applications when combined with DTX. Here, we investigated the efficacy of additive naftopidil treatment in combination with DTX on prostate cancer (PCa) cells. The effects of combination treatment with DTX plus naftopidil were analyzed using two animal models of LNCaP cells plus PrSC xenografts (sub-renal capsule grafting) and PC-3 xenografts (intratibial injection). Combination treatment with DTX plus naftopidil significantly inhibited cell growth in LNCaP cells compared with DTX alone. Analysis of the cooperativity index (CI) showed that combination treatment exhibited additive effects on DTX-induced growth inhibition in LNCaP cells. In contrast, combination treatment showed more than an additive (synergistic) effect on DTX-induced apoptosis in LNCaP and PC-3 cells. In LNCaP cells plus PrSC xenografts, combination treatment showed synergistic effects on DTX-induced apoptosis. The synergistic effects of naftopidil on DTX-induced apoptosis were also observed in PC-3 xenografts. Our results demonstrated that additive naftopidil treatment in combination with DTX increased the efficacy of DTX for the treatment of LNCaP and PC-3 tumors in vivo. Thus, additive naftopidil treatment showed a synergistic effect on DTX-induced apoptosis in PCa cells in vitro and in vivo, suggesting that this treatment approach may yield improved clinical benefits compared with DTX alone.
Comparative study of the effect of pharmaceutical additives on the elimination of antibiotic activity during the treatment of oxacillin in water by the photo-Fenton, TiO2-photocatalysis and electrochemical processes.

PubMed

Serna-Galvis, Efraim A; Silva-Agredo, Javier; Giraldo, Ana L; Flórez-Acosta, Oscar A; Torres-Palma, Ricardo A

2016-01-15

Synthetic pharmaceutical effluents loaded with the β-lactam antibiotic oxacillin were treated using advanced oxidation processes (the photo-Fenton system and TiO2 photocatalysis) and chloride mediated electrochemical oxidation (with Ti/IrO2 anodes). Combinations of the antibiotic with excipients (mannitol or tartaric acid), an active ingredient (calcium carbonate, i.e. bicarbonate ions due to the pH) and a cleaning agent (sodium lauryl ether sulfate) were considered. Additionally, urban wastewater that had undergone biological treatment was doped with oxacillin and treated with the tested systems. The evolution of antimicrobial activity was monitored as a parameter of processes efficiency. Although the two advanced oxidation processes (AOPs) differ only in the way they produce OH, marked differences were observed between them. There were also differences between the AOPs and the electrochemical system. Interestingly, each additive had a different effect on each treatment. For water loaded with mannitol, electrochemical treatment was the most suitable option because the additive did not significantly affect the efficiency of the system. Due to the formation of a complex with Fe(3+), tartaric acid accelerated the elimination of antibiotic activity during the photo-Fenton process. For TiO2 photocatalysis, the presence of bicarbonate ions contributed to antibiotic activity elimination through the possible formation of carbonate and bicarbonate radicals. Sodium lauryl ether sulfate negatively affected all of the processes. However, due to the higher selectivity of HOCl compared with OH, electrochemical oxidation showed the least inhibited efficiency. For the urban wastewater doped with oxacillin, TiO2 photocatalysis was the most efficient process. These results will help select the most suitable technology for the treatment of water polluted with β-lactam antibiotics. Copyright © 2015 Elsevier B.V. All rights reserved.

Genetic interactions contribute less than additive effects to quantitative trait variation in yeast

PubMed Central

Bloom, Joshua S.; Kotenko, Iulia; Sadhu, Meru J.; Treusch, Sebastian; Albert, Frank W.; Kruglyak, Leonid

2015-01-01

Genetic mapping studies of quantitative traits typically focus on detecting loci that contribute additively to trait variation. Genetic interactions are often proposed as a contributing factor to trait variation, but the relative contribution of interactions to trait variation is a subject of debate. Here we use a very large cross between two yeast strains to accurately estimate the fraction of phenotypic variance due to pairwise QTL–QTL interactions for 20 quantitative traits. We find that this fraction is 9% on average, substantially less than the contribution of additive QTL (43%). Statistically significant QTL–QTL pairs typically have small individual effect sizes, but collectively explain 40% of the pairwise interaction variance. We show that pairwise interaction variance is largely explained by pairs of loci at least one of which has a significant additive effect. These results refine our understanding of the genetic architecture of quantitative traits and help guide future mapping studies. PMID:26537231
Website Use and Effects of Online Information About Tobacco Additives Among the Dutch General Population: A Randomized Controlled Trial

PubMed Central

Crutzen, Rik; Kienhuis, Anne S; Talhout, Reinskje; de Vries, Hein

2017-01-01

Background As a legal obligation, the Dutch government publishes online information about tobacco additives to make sure that it is publicly available. Little is known about the influence this website (”tabakinfo”) has on visitors and how the website is evaluated by them. Objective This study assesses how visitors use the website and its effect on their knowledge, risk perception, attitude, and smoking behavior. The study will also assess how the website is evaluated by visitors using a sample of the Dutch general population, including smokers and nonsmokers. Methods A randomized controlled trial was conducted, recruiting participants from an online panel. At baseline, participants (N=672) were asked to fill out an online questionnaire about tobacco additives. Next, participants were randomly allocated to either one of two experimental groups and invited to visit the website providing information about tobacco additives (either with or without a database containing product-specific information) or to a control group that had no access to the website. After 3 months, follow-up measurements took place. Results At follow-up (n=492), no statistically significant differences were found for knowledge, risk perception, attitude, or smoking behavior between the intervention and control groups. Website visits were positively related to younger participants (B=–0.07, 95% CI –0.12 to –0.01; t11=–2.43, P=.02) and having a low risk perception toward tobacco additives (B=–0.32, 95% CI –0.63 to –0.02; t11=–2.07, P=.04). In comparison, having a lower education (B=–0.67, 95% CI –1.14 to –0.17; t11=–2.65, P=.01) was a significant predictor for making less use of the website. Furthermore, the website was evaluated less positively by smokers compared to nonsmokers (t324=–3.55, P<.001), and males compared to females (t324=–2.21, P=.02). Conclusions The website did not change perceptions of tobacco additives or smoking behavior. Further research is
Website Use and Effects of Online Information About Tobacco Additives Among the Dutch General Population: A Randomized Controlled Trial.

PubMed

Reinwand, Dominique A; Crutzen, Rik; Kienhuis, Anne S; Talhout, Reinskje; de Vries, Hein

2017-03-14

As a legal obligation, the Dutch government publishes online information about tobacco additives to make sure that it is publicly available. Little is known about the influence this website ("tabakinfo") has on visitors and how the website is evaluated by them. This study assesses how visitors use the website and its effect on their knowledge, risk perception, attitude, and smoking behavior. The study will also assess how the website is evaluated by visitors using a sample of the Dutch general population, including smokers and nonsmokers. A randomized controlled trial was conducted, recruiting participants from an online panel. At baseline, participants (N=672) were asked to fill out an online questionnaire about tobacco additives. Next, participants were randomly allocated to either one of two experimental groups and invited to visit the website providing information about tobacco additives (either with or without a database containing product-specific information) or to a control group that had no access to the website. After 3 months, follow-up measurements took place. At follow-up (n=492), no statistically significant differences were found for knowledge, risk perception, attitude, or smoking behavior between the intervention and control groups. Website visits were positively related to younger participants (B=-0.07, 95% CI -0.12 to -0.01; t 11 =-2.43, P=.02) and having a low risk perception toward tobacco additives (B=-0.32, 95% CI -0.63 to -0.02; t 11 =-2.07, P=.04). In comparison, having a lower education (B=-0.67, 95% CI -1.14 to -0.17; t 11 =-2.65, P=.01) was a significant predictor for making less use of the website. Furthermore, the website was evaluated less positively by smokers compared to nonsmokers (t 324 =-3.55, P<.001), and males compared to females (t 324 =-2.21, P=.02). The website did not change perceptions of tobacco additives or smoking behavior. Further research is necessary to find out how online information can be used to effectively
Additive effects of word frequency and stimulus quality: the influence of trial history and data transformations.

PubMed

Balota, David A; Aschenbrenner, Andrew J; Yap, Melvin J

2013-09-01

A counterintuitive and theoretically important pattern of results in the visual word recognition literature is that both word frequency and stimulus quality produce large but additive effects in lexical decision performance. The additive nature of these effects has recently been called into question by Masson and Kliegl (in press), who used linear mixed effects modeling to provide evidence that the additive effects were actually being driven by previous trial history. Because Masson and Kliegl also included semantic priming as a factor in their study and recent evidence has shown that semantic priming can moderate the additivity of word frequency and stimulus quality (Scaltritti, Balota, & Peressotti, 2012), we reanalyzed data from 3 published studies to determine if previous trial history moderated the additive pattern when semantic priming was not also manipulated. The results indicated that previous trial history did not influence the joint influence of word frequency and stimulus quality. More important, and independent of Masson and Kliegl's conclusions, we also show how a common transformation used in linear mixed effects analyses to normalize the residuals can systematically alter the way in which two variables combine to influence performance. Specifically, using transformed, rather than raw reaction times, consistently produces more underadditive patterns. PsycINFO Database Record (c) 2013 APA, all rights reserved.
Additive interaction between heterogeneous environmental ...

EPA Pesticide Factsheets

BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic) using principal component analyses. County-level preterm birth rates (n=3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD) and 95% confidence intervals (CI) comparing worse environmental quality to the better quality for each model for a) each individual domain main effect b) the interaction contrast and c) the two main effects plus interaction effect (i.e. the “net effect”) to show departure from additive interaction for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interac
Effects of biochar addition on toxic element concentrations in plants: A meta-analysis.

PubMed

Peng, Xin; Deng, Yinger; Peng, Yan; Yue, Kai

2018-03-01

Consuming food contaminated by toxic elements (TEs) could pose a substantial risk to human health. Recently, biochar has been extensively studied as an effective soil ameliorant in situ because of its ability to suppress the phytoavailability of TEs. However, despite the research interest, the effects of biochar applications to soil on different TE concentrations in different plant parts remain unclear. Here, we synthesize 1813 individual observations data collected from 97 articles to evaluate the effects of biochar addition on TE concentrations in plant parts. We found that (1) the experiment type, biochar feedstock and pyrolysis temperature all significantly decreased the TE concentration in plant parts; (2) the responses of Cd and Pb concentrations in edible and indirectly edible plant parts were significantly more sensitive to the effect of biochar than the Zn, Ni, Mn, Cr, Co and Cu concentrations; and (3) the biochar dosage and surface area, significantly influenced certain TE concentrations in plant tissues as determined via correlation analysis. Moreover, the only exception in this study was found for metalloid element (i.e., As) concentrations in plants, which were not significantly influenced by biochar addition. Overall, the effects of biochar on TE concentrations in plant tissues were negative, at least on average, and the central trends suggest that biochar has a considerable ability to mitigate the transfer of TEs to food, thereby reducing the associated health risks. Our results provide an initial quantitative determination of the effects of biochar addition on multifarious TEs in different plant parts as well as an assessment of the ability of biochar to reduce TE concentrations in plants. Copyright © 2017 Elsevier B.V. All rights reserved.
Regulation of docosahexaenoic acid production by Schizochytrium sp.: effect of nitrogen addition.

PubMed

Ren, Lu-Jing; Sun, Li-Na; Zhuang, Xiao-Yan; Qu, Liang; Ji, Xiao-Jun; Huang, He

2014-05-01

Docosahexaenoic acid (DHA) percentage in total fatty acids (TFAs) is an important index in DHA microbial production. In this study, the change of DHA percentage in response to fermentation stages and the strategies to increase DHA percentage were investigated. Two kinds of conventional nitrogen sources, monosodium glutamate (MSG) and ammonium sulfate (AS), were tested to regulate DHA synthesis. Results showed that MSG addition could accelerate the substrate consumption rate but inhibit lipid accumulation, while AS addition could increase DHA percentage in TFAs effectively but extend fermentation period slightly. Finally, the AS addition strategy was successfully applied in 7,000-L fermentor and DHA percentage in TFAs and DHA yield reached 46.06 % and 18.48 g/L, which was 19.54 and 17.41 % higher than that of no-addition strategy. This would provide guidance for the large-scale production of the other similar polyunsaturated fatty acid, and give insight into the nitrogen metabolism in oil-producing microorganisms.
Pathways of nitrobenzene degradation in horizontal subsurface flow constructed wetlands: Effect of intermittent aeration and glucose addition.

PubMed

Kirui, Wesley K; Wu, Shubiao; Kizito, Simon; Carvalho, Pedro N; Dong, Renjie

2016-01-15

Intermittent aeration and addition of glucose were applied to horizontal subsurface flow constructed wetlands in order to investigate the effect on pathways of nitrobenzene (NB) degradation and interactions with microbial nitrogen and sulphur transformations. The experiment was carried out in three phases A, B and C consisting of different NB loading and glucose dosing. For each phase, the effect of aeration was assessed by intermittently aerating one wetland and leaving one unaerated. Regardless of whether or not the wetland was aerated, at an influent NB concentration of 140 mg/L, both wetlands significantly reduced NB to less than 2 mg/L, a reduction efficiency of 98%. However, once the influent NB concentration was increased to 280 mg/L, the aerated wetland had a higher removal performance 82% compared to that of the unaerated wetland 71%. Addition of glucose further intensified the NB removal to 95% in the aerated wetlands and 92% in the unaerated. Aeration of wetlands enhanced NB degradation, but also resulted in higher NB volatilization of 6 mg m(-2) d(-1). The detected high concentration of sulphide 20-60 mg/L in the unaerated wetland gave a strong indication that NB may act as an electron donor to sulphate-reducing bacteria, but this should be further investigated. Aeration positively improved NB removal in constructed wetlands, but resulted in higher NB volatilization. Glucose addition induced co-metabolism to enhance NB degradation. Copyright © 2015 Elsevier Ltd. All rights reserved.
Additive and Interactive Effects of Stimulus Degradation: No Challenge for CDP+

ERIC Educational Resources Information Center

Ziegler, Johannes C.; Perry, Conrad; Zorzi, Marco

2009-01-01

S. O'Malley and D. Besner (2008) showed that additive effects of stimulus degradation and word frequency in reading aloud occur in the presence of nonwords but not in pure word lists. They argued that this dissociation presents a major challenge to interactive computational models of reading aloud and claimed that no currently implemented model is…
Effect of crystals and fibrous network polymer additives on cellular morphology of microcellular foams

NASA Astrophysics Data System (ADS)

Miyamoto, Ryoma; Utano, Tatsumi; Yasuhara, Shunya; Ishihara, Shota; Ohshima, Masahiro

2015-05-01

In this study, the core-back foam injection molding was used for preparing microcelluar polypropylene (PP) foam with either a 1,3:2,4 bis-O-(4-methylbenzylidene)-D-sorbitol gelling agent (Gel-all MD) or a fibros network polymer additive (Metablen 3000). Both agent and addiive could effectively control the celluar morphology in foams but somehow different ways. In course of cooling the polymer with Gel-all MD in the mold caity, the agent enhanced the crystal nucleation and resulted in the large number of small crystals. The crystals acted as effective bubble nucleation agent in foaming process. Thus, the agent reduced the cell size and increased the cell density, drastically. Furthermore, the small crystals provided an inhomogenuity to the expanding cell wall and produced the high open cell content with nano-scale fibril structure. Gell-all as well as Metablene 3000 formed a gel-like fibrous network in melt. The network increased the elongational viscosity and tended to prevent the cell wall from breaking up. The foaming temperature window was widened by the presence of the network. Especially, the temperature window where the macro-fibrous structure was formed was expanded to the higher temperature. The effects of crystal nucleating agent and PTFE on crystals' size and number, viscoelsticity, rheological propreties of PP and cellular morphology were compared and thorougly investigated.
Effect of basic and acidic additives on the separation of some basic drug enantiomers on polysaccharide-based chiral columns with acetonitrile as mobile phase.

PubMed

Gogaladze, Khatuna; Chankvetadze, Lali; Tsintsadze, Maia; Farkas, Tivadar; Chankvetadze, Bezhan

2015-03-01

The separation of enantiomers of 16 basic drugs was studied using polysaccharide-based chiral selectors and acetonitrile as mobile phase with emphasis on the role of basic and acidic additives on the separation and elution order of enantiomers. Out of the studied chiral selectors, amylose phenylcarbamate-based ones more often showed a chiral recognition ability compared to cellulose phenylcarbamate derivatives. An interesting effect was observed with formic acid as additive on enantiomer resolution and enantiomer elution order for some basic drugs. Thus, for instance, the enantioseparation of several β-blockers (atenolol, sotalol, toliprolol) improved not only by the addition of a more conventional basic additive to the mobile phase, but also by the addition of an acidic additive. Moreover, an opposite elution order of enantiomers was observed depending on the nature of the additive (basic or acidic) in the mobile phase. © 2015 Wiley Periodicals, Inc.
Ether oxygenate additives in gasoline reduce toxicity of exhausts.

PubMed

Westphal, G A; Krahl, J; Brüning, T; Hallier, E; Bünger, J

2010-02-09

Fuel additives can improve combustion and knock resistance of gasoline engines. Common additives in commercial fuels are "short-chain, oxygen containing hydrocarbons" such as methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE). Since these additives change the combustion characteristics, this may as well influence toxic effects of the resulting emissions. Therefore we compared toxicity and BTEX emissions of gasoline engine exhaust regarding addition of MTBE or ETBE. Non-reformulated gasoline served as basic fuel. This fuel was supplemented with 10%, 20%, 25% and 30% ETBE or 15% MTBE. The fuels were combusted in a gasoline engine at idling, part load and rated power. Condensates and particulate matter (PM) were collected and PM samples extracted with dichloromethane. Cytotoxic effects were investigated in murine fibroblasts (L929) using the neutral red uptake assay and mutagenicity using the bacterial reverse mutation assay. BTEX emissions were analyzed by gas chromatography. PM-extracts showed mutagenicity with and without metabolic activation. Mutagenicity was reduced by the addition of MTBE and ETBE, 10% ETBE being most effective. The condensates produced no significant mutagenic response. The cytotoxicity of the condensates from ETBE- and MTBE-reformulated fuels was reduced as well. The BTEX content in the exhaust was lowered by the addition of MTBE and ETBE. This effect was significantly related to the ETBE content at rated power and part load. Addition of MTBE and ETBE to fuels can improve combustion and leads to decreased toxicity and BTEX content of the exhaust. Reduction of mutagenicity in the PM-extracts is most probably caused by a lower content of polycyclic aromatic hydrocarbons. (c) 2009 Elsevier Ireland Ltd. All rights reserved.
Antiinflammatory and ROS Suppressive Effects of the Addition of Fiber to a High-Fat High-Calorie Meal.

PubMed

Ghanim, Husam; Batra, Manav; Abuaysheh, Sanaa; Green, Kelly; Makdissi, Antoine; Kuhadiya, Nitesh D; Chaudhuri, Ajay; Dandona, Paresh

2017-03-01

Fiber intake is associated with a reduction in the occurrence of cardiovascular events and diabetes. To investigate whether the addition of fiber to a high-fat, high-calorie (HFHC) meal prevents proinflammatory changes induced by the HFHC meal. Ten normal fasting subjects consumed an HFHC meal with or without an additional 30 g of insoluble dietary fiber on 2 separate visits. Blood samples were collected over 5 hours, and mononuclear cells (MNCs) were isolated. Fiber addition to the HFHC meal significantly lowered glucose excursion in the first 90 minutes and increased insulin and C-peptide secretion throughout the 5-hour follow-up period compared with the meal alone. The HFHC meal induced increases in lipopolysaccharide (LPS) concentrations, MNC reactive oxygen species generation, and the expression of interleukin (IL)-1β, tumor necrosis factor α (TNF-α), Toll-like receptor (TLR)-4, and CD14. The addition of fiber prevented an increase in LPS and significantly reduced the increases in ROS generation and the expression of IL-1β, TNF-α, TLR-4, and CD14. In addition, the meal increased Suppressor of cytokine signaling (SOCS)-3 and protein tyrosine phosphatase 1B (PTP-1B) messenger RNA and protein levels, which were inhibited when fiber was added. The addition of fiber to a proinflammatory HFHC meal had beneficial anti-inflammatory and metabolic effects. Thus, the fiber content of the American Heart Association meal may contribute to its noninflammatory nature. If these actions of dietary fiber are sustained following long-term intake, they may contribute to fiber's known benefits in the prevention of insulin resistance, type 2 diabetes, and atherosclerosis. Copyright © 2017 by the Endocrine Society
Explanation of non-additive effects in mixtures of similar mode of action chemicals.

PubMed

Kamo, Masashi; Yokomizo, Hiroyuki

2015-09-01

Many models have been developed to predict the combined effect of drugs and chemicals. Most models are classified into two additive models: independent action (IA) and concentration addition (CA). It is generally considered if the modes of action of chemicals are similar then the combined effect obeys CA; however, many empirical studies report nonlinear effects deviating from the predictions by CA. Such deviations are termed synergism and antagonism. Synergism, which leads to a stronger toxicity, requires more careful management, and hence it is important to understand how and which combinations of chemicals lead to synergism. In this paper, three types of chemical reactions are mathematically modeled and the cause of the nonlinear effects among chemicals with similar modes of action was investigated. Our results show that combined effects obey CA only when the modes of action are exactly the same. Contrary to existing knowledge, combined effects are generally nonlinear even if the modes of action of the chemicals are similar. Our results further show that the nonlinear effects vanish out when the chemical concentrations are low, suggesting that the current management procedure of assuming CA is rarely inappropriate because environmental concentrations of chemicals are generally low. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Biochemical methane potential from sewage sludge: Effect of an aerobic pretreatment and fly ash addition as source of trace elements.

PubMed

Huiliñir, César; Pinto-Villegas, Paula; Castillo, Alejandra; Montalvo, Silvio; Guerrero, Lorna

2017-06-01

The effect of aerobic pretreatment and fly ash addition on the production of methane from mixed sludge is studied. Three assays with pretreated and not pretreated mixed sludge in the presence of fly ash (concentrations of 0, 10, 25, 50, 250 and 500mg/L) were run at mesophilic condition. It was found that the combined use of aerobic pretreatment and fly ash addition increases methane production up to 70% when the fly ash concentrations were lower than 50mg/L, while concentrations higher than 250mg/L cause up to 11% decrease of methane production. For the anaerobic treatment of mixed sludge without pretreatment, the fly ash improved methane generation at all the concentrations studied, with a maximum of 56%. The removal of volatile solids does not show an improvement compared to the separate use of an aerobic pre-treatment and fly ash addition. Therefore, the combined use of the aerobic pre-treatment and fly ash addition improves only the production of methane. Copyright © 2017 Elsevier Ltd. All rights reserved.
The effects of additional arm weights on arm-swing magnitude and gait patterns in Parkinson's disease.

PubMed

Yoon, Jiyeon; Park, Jinse; Park, Kunbo; Jo, Geunyeol; Kim, Haeyu; Jang, Wooyoung; Kim, Ji Sun; Youn, Jinyoung; Oh, Eung Seok; Kim, Hee-Tae; Youm, Chang Hong

2016-01-01

Recently, arm facilitation has been interested in gait rehabilitation. However, there have been few studies concerning arm facilitation in patients with Parkinson's disease (PD). The aim of our study was to investigate the effect of increasing arm weights on gait pattern in patients with PD. Twenty-seven patients with PD were enrolled, and they underwent gait analysis using a three-dimensional motion capture system. Sandbags were applied to the distal forearms in all participants. We compared gait parameters including arm swing, pelvic motion, spatiotemporal data, and relative rotational angle between the weighted and unweighted gaits. The total arm-swing amplitude and pelvic rotation were significantly higher when walking with additional arm weights than without arm weights. Cadence, walking speed, stride length, and swing phase were significantly higher, whereas stride time, double-support time, and stance phase were significantly lower, when walking with additional arm weights than without arm weights. We conclude that adding weights to the arm during walking may facilitate arm and pelvic movements, which results in changes to gait patterns. The therapeutic use of additional arm weights could be considered for gait rehabilitation in PD to improve gait impairment. Arm-swing facilitation using weight load improved gait in Parkinson's disease. Copyright © 2015 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.
Inhibiting Effect of Additives on Pressure Solution of Calcite

NASA Astrophysics Data System (ADS)

Traskine, V.; Skvortsova, Z.; Badun, G.; Chernysheva, M.; Simonov, Ya.; Gazizullin, I.

2018-05-01

The task of protection of cultural heritage requires a better understanding of combined effects of mechanical and chemical factors involved in environmental deterioration of monuments. The present paper deals with extending some known physicochemical methods proposed for inhibiting the decay of unstressed materials to their study during water-assisted deformation. The tests have been carried out on natural limestone samples and calcite powders in CaCO3 saturated aqueous solutions under static loads causing measurable pressure solution creep. In the solutions containing 1-hydroxyethylidene-1,1-diphosphonic acid, nitrilotriacetic acid, or ethylenediaminetetraacetic acid, the creep rate decreases considerably with increasing concentration of additives. The extent of creep deceleration has been found to be proportional to the independently estimated calcite surface area occupied by adsorbed species. This fact enables us to discriminate the adsorption-induced effect from other variables controlling the pressure solution rate and may be used in screening of compounds able to minimize the environmental impact on marble and limestone objects undergoing mechanical stresses.
Tracking medication changes to assess outcomes in comparative effectiveness research: A bipolar CHOICE study.

PubMed

Reilly-Harrington, Noreen A; Sylvia, Louisa G; Rabideau, Dustin J; Gold, Alexandra K; Deckersbach, Thilo; Bowden, Charles L; Bobo, William V; Singh, Vivek; Calabrese, Joseph R; Shelton, Richard C; Friedman, Edward S; Thase, Michael E; Kamali, Masoud; Tohen, Mauricio; McInnis, Melvin G; McElroy, Susan L; Ketter, Terence A; Kocsis, James H; Kinrys, Gustavo; Nierenberg, Andrew A

2016-11-15

Comparative effectiveness research uses multiple tools, but lacks outcome measures to assess large electronic medical records and claims data. Aggregate changes in medications in response to clinical need may serve as a surrogate outcome measure. We developed the Medication Recommendation Tracking Form (MRTF) to record the frequency, types, and reasons for medication adjustments in order to calculate Necessary Clinical Adjustments (NCAs), medication adjustments to reduce symptoms, maximize treatment response, or address problematic side effects. The MRTF was completed at every visit for 482 adult patients in Bipolar CHOICE, a 6-month randomized comparative effectiveness trial. Responders had significantly fewer NCAs compared to non-responders. NCAs predicted subsequent response status such that every additional NCA during the previous visit decreased a patient's odds of response by approximately 30%. Patients with more severe symptoms had a greater number of NCAs at the subsequent visit. Patients with a comorbid anxiety disorder demonstrated a significantly higher rate of NCAs per month than those without a comorbid anxiety disorder. Patients with greater frequency, intensity, and interference of side effects had higher rates of NCAs. Participants with fewer NCAs reported a higher quality of life and decreased functional impairment. The MRTF has not been examined in community clinic settings and did not predict response more efficiently than the Clinical Global Impression-Bipolar Version (CGI-BP). The MRTF is a feasible proxy of clinical outcome, with implications for clinical training and decision-making. Analyses of big data could use changes in medications as a surrogate outcome measure. Copyright © 2016 Elsevier B.V. All rights reserved.
Species Composition and Fire: Non-Additive Mixture Effects on Ground Fuel Flammability

PubMed Central

van Altena, Cassandra; van Logtestijn, Richard S. P.; Cornwell, William K.; Cornelissen, Johannes H. C.

2012-01-01

Diversity effects on many aspects of ecosystem function have been well documented. However, fire is an exception: fire experiments have mainly included single species, bulk litter, or vegetation, and, as such, the role of diversity as a determinant of flammability, a crucial aspect of ecosystem function, is poorly understood. This study is the first to experimentally test whether flammability characteristics of two-species mixtures are non-additive, i.e., differ from expected flammability based on the component species in monospecific fuel. In standardized fire experiments on ground fuels, including monospecific fuels and mixtures of five contrasting subarctic plant fuel types in a controlled laboratory environment, we measured flame speed, flame duration, and maximum temperature. Broadly half of the mixture combinations showed non-additive effects for these flammability indicators; these were mainly enhanced dominance effects for temporal dynamics – fire speed and duration. Fuel types with the more flammable value for a characteristic determined the rate of fire speed and duration of the whole mixture; in contrast, maximum temperature of the fire was determined by the biomass-weighted mean of the mixture. These results suggest that ecological invasions by highly flammable species may have effects on ground-fire dynamics well out of proportion to their biomass. PMID:22639656
Effect of herbal feed additives on performance parameters, intestinal microbiota, intestinal morphology and meat lipid oxidation of broiler chickens.

PubMed

Giannenas, Ilias; Bonos, Eleftherios; Skoufos, Ioannis; Tzora, Athina; Stylianaki, Ioanna; Lazari, Diamanto; Tsinas, Anastasios; Christaki, Efterpi; Florou-Paneri, Panagiota

2018-06-06

1. This feeding trial investigated the effects of herbal feed additives on performance of broiler chickens, jejunal and caecal microbiota, jejunal morphology, and meat chemical composition and oxidative stability during refrigerated storage. 2. In a 42 days trial, 320 one-day-old broiler chickens were randomly allocated to four groups with four replicate pens each containing 20 chicks. The control group was fed maize-soybean-based diets. The diets of the other three groups were supplemented with herbal feed additives: HRB1 with Stresomix TM (0.5 g/kg feed); HRB2 with Ayucee TM (1.0 g/kg feed); HRB3 with Salcochek Pro TM (1.0 g/kg feed). The GC/MS analysis of the feed additives showed that the major components of HRB1 were β-caryophyllene (14.4%) and menthol (9.8%); HRB2 were n-hexadecanoic acid (14.22%) and β-caryophyllene (14.4%) and HRB3 were menthol (69.6%) and clavicol methyl ether (13.9%). 3. Intestinal samples were taken at 42 d to determine bacterial populations (total aerobe counts, Lactobacilli, and Escherichia coli) and perform gut morphology analysis. Meat samples were analysed for chemical composition and oxidative stability under storage. 4. The HRB1 group had improved (P<0.05) body weight gain and tended to have improved (0.05≤P<0.10) feed conversion ratio, compared to the control group. Jejunum lactic acid bacteria counts were increased (P<0.001) in groups HRB1 and HRB3, compared to the control group, whereas caecal lactic acid bacteria counts tended to increase (0.05≤ P< 0.10) in group HRB1, compared to the control group. Breast meat fat content tended to be lower (0.05≤ P< 0.10) in group HRB1. Meat oxidative stability was improved (P<0.001) and jejunum villus height, crypt depth and goblet cells numbers were increased (P<0.001) in all three herbal supplemented groups, compared to the control. 5. In conclusion, herbal feed additives may be able to improve both growth performance and antioxidant activity of broiler chickens, based on their

Enantioselective and Regioselective Indium(III)-Catalyzed Addition of Pyrroles to Isatins

PubMed Central

Gutierrez, Elisa G.; Wong, Casey J.; Sahin, Aziza H.

2011-01-01

The indium(III)-catalyzed enantioselective and regioselective addition of pyrroles to isatins is described. The effects of metal and solvent on the reactivity and selectivity are compared and discussed, demonstrating that the indium(III)-indapybox complex provides the most effective catalyst. A case of divergent reactivity between pyrroles and indoles is presented. PMID:21992567
Effect of additive on Zeta potential and particle size of nickel nanoparticles

NASA Astrophysics Data System (ADS)

Sharma, Vikash; Tarachand, Chotia, Chandrabhan; Okram, G. S.

2017-05-01

Nickel nanoparticles (NPs) were prepared by thermal decomposition method using Oleylamine (OLY) as a solvent and Trioctylphosphine (TOP) as a surfactant. We have investigated the effect of pH and addition of Ethylenediamine tetraacetic acid (EDTA) on the stability and particle size of Ni NPs using zeta potential and particle size analyser. Coating of the surfactants on the surface of Ni NPs was confirmed by Fourier transform infrared (FTIR) spectroscopy. Autotitration study of zeta potential of these NPs in ethanol by dynamic light scattering (DLS) at different pH values confirmed an isoelectric point (IEP) at pH = 3.64 in ethanol and pH = 3.04 after addition of EDTA in ethanol. It was observed that addition of EDTA in nanosuspension enhances stability of Ni-NPs significantly.
Comparative Effectiveness of Cancer Control and Survival After Robot Assisted versus Open Radical Prostatectomy

PubMed Central

Hu, Jim H.; O’Malley, Padraic; Chughtai, Bilal; Isaacs, Abby; Mao, Jialin; Wright, Jason D.; Hershman, Dawn; Sedrakyan, Art

2017-01-01

Introduction Robot-assisted surgery has been rapidly adopted in the U.S. for prostate cancer (PCa). Its adoption has been driven by market forces and patient preference, and debate continues regarding whether it offers improved outcomes to justify higher cost relative to open surgery. We examined comparative effectiveness of robot assisted (RARP) versus open radical prostatectomy (ORP) in cancer control and survival in a nationally representative population. Materials and Methods Population based observational cohort study of PCa patients undergoing RARP and ORP during 2003–2012 captured in Surveillance, Epidemiology, and End Results (SEER)-Medicare linked database. Propensity score matching and time to event analysis was used to compare all-cause mortality, prostate cancer-specific mortality and use of additional treatment following surgery. Results 6,430 RARP and 9,161 ORP performed during 2003–2012 were identified. RARP increased in use from 13.6% to 72.6% in 2003–2004 to 72.6% in 2011–2012. After median follow-up of 6.5 years (IQR 5.2–7.9), RARP was associated with equivalent risk of all-cause mortality (Hazard Ratio [HR] 0.85, [0.72–1.01]) and similar cancer-specific mortality (HR 0.85, [0.50–1.43]) versus ORP. RARP was also associated with less use of additional treatment (HR 0.78, [0. 70–0.86]). Conclusions RARP has comparable intermediate cancer control, as evidenced by less use of additional postoperative cancer therapies and equivalent cancer-specific and overall survival. Longer-term follow-up is needed to assess for differences in PCa-specific survival, which was similar during intermediate follow-up. Our findings have significant quality and cost implications and provide reassurance regarding the adoption of more expensive technology in absence of randomized controlled trials. PMID:27720782
Effectiveness of the Touch Math Technique in Teaching Basic Addition to Children with Autism

ERIC Educational Resources Information Center

Yikmis, Ahmet

2016-01-01

This study aims to reveal whether the touch math technique is effective in teaching basic addition to children with autism. The dependent variable of this study is the children's skills to solve addition problems correctly, whereas teaching with the touch math technique is the independent variable. Among the single-subject research models, a…
Effect of exogenous phosphorus addition on soil respiration in Calamagrostis angustifolia freshwater marshes of Northeast China

NASA Astrophysics Data System (ADS)

Song, Changchun; Liu, Deyan; Song, Yanyu; Yang, Guisheng; Wan, Zhongmei; Li, Yingchen; Xu, Xiaofeng

2011-03-01

Anthropogenic activities have increased phosphorus (P) inputs to wetland ecosystems. However, little is known about the effect of P enrichment on soil respiration in these ecosystems. To understand the effect of P enrichment on soil respiration, we conducted a field experiment in Calamagrostis angustifolia-dominated freshwater marshes, the Sanjiang Plain, Northeast China. We investigated soil respiration in the first growing season after P addition at four rates (0, 1.2, 4.8 and 9.6 g P m-2 year-1). In addition, we also examined aboveground biomass, soil labile C fractions (dissolved organic C, DOC; microbial biomass C, MBC; easily oxidizable C, EOC) and enzyme activities (invertase, urease and acid phosphatase activities) following one year of P addition. P addition decreased soil respiration during the growing season. Dissolved organic C in soil pore water increased after P addition at both 5 and 15 cm depths. Moreover, increased P input generally inhibited soil MBC and enzyme activities, and had no effects on aboveground biomass and soil EOC. Our results suggest that, in the short-term, soil respiration declines under P enrichment in C. angustifolia-dominated freshwater marshes of Northeast China, and its extent varies with P addition levels.
SideRack: A Cost-Effective Addition to Commercial Zebrafish Housing Systems

PubMed Central

Burg, Leonard; Gill, Ryan; Balciuniene, Jorune

2014-01-01

Abstract Commercially available aquatic housing systems provide excellent and relatively trouble-free hardware for rearing and housing juvenile as well as adult zebrafish. However, the cost of such systems is quite high and potentially prohibitive for smaller educational and research institutions. The need for tank space prompted us to experiment with various additions to our existing Aquaneering system. We also noted that high water exchange rates typical in commercial systems are suboptimal for quick growth of juvenile fish. We devised a housing system we call “SideRack,” which contains 20 large tanks with air supply and slow water circulation. It enables cost-effective expansion of existing fish facility, with a key additional benefit of increased growth and maturation rates of juvenile fish. PMID:24611601
International survey on willingness-to-pay (WTP) for one additional QALY gained: what is the threshold of cost effectiveness?

PubMed

Shiroiwa, Takeru; Sung, Yoon-Kyoung; Fukuda, Takashi; Lang, Hui-Chu; Bae, Sang-Cheol; Tsutani, Kiichiro

2010-04-01

Although the threshold of cost effectiveness of medical interventions is thought to be 20 000- 30 000 UK pounds in the UK, and $50 000-$100 000 in the US, it is well known that these values are unjustified, due to lack of explicit scientific evidence. We measured willingness-to-pay (WTP) for one additional quality-adjusted life-year gained to determine the threshold of the incremental cost-effectiveness ratio. Our study used the Internet to compare WTP for the additional year of survival in a perfect status of health in Japan, the Republic of Korea (ROK), Taiwan, Australia, the UK, and the US. The research utilized a double-bound dichotomous choice, and analysis by the nonparametric Turnbull method. WTP values were JPY 5 million (Japan), KWN 68 million (ROK), NT$ 2.1 million (Taiwan), 23 000 UK pounds (UK), AU$ 64 000 (Australia), and US$ 62 000 (US). The discount rates of outcome were estimated at 6.8% (Japan), 3.7% (ROK), 1.6% (Taiwan), 2.8% (UK), 1.9% (Australia), and 3.2% (US). Based on the current study, we suggest new classification of cost-effectiveness plane and methodology for decision making. Copyright (c) 2009 John Wiley & Sons, Ltd.
Comparative Investigation of Protective Effects of Metyrosine and Metoprolol Against Ketamine Cardiotoxicity in Rats.

PubMed

Ahiskalioglu, Ali; Ince, Ilker; Aksoy, Mehmet; Ahiskalioglu, Elif Oral; Comez, Mehmet; Dostbil, Aysenur; Celik, Mine; Alp, Hamit Hakan; Coskun, Resit; Taghizadehghalehjoughi, Ali; Suleyman, Bahadir

2015-10-01

This study investigated the effect of metyrosine against ketamine-induced cardiotoxicity in rats and compared the results with the effect of metoprolol. In this study, rats were divided into groups A, B and C. In group A, we investigated the effects of a single dose of metyrosine (150 mg/kg) and metoprolol (20 mg/kg) on single dose ketamine (60 mg/kg)-induced cardiotoxicity. In group B, we investigated the effect of metyrosine and metoprolol, which were given together with ketamine for 30 days. In group C, we investigated the effect of metyrosine and metoprolol given 15 days before ketamine and 30 days together with ketamine on ketamine cardiotoxicity. By the end of this process, we evaluated the effects of the levels of oxidant-antioxidant parameters such as MDA, MPO, 8-OHGua, tGSH, and SOD in addition to CK-MB and TP I on cardiotoxicity in rat heart tissue. The experimental results show that metyrosine prevented ketamine cardiotoxicity in groups A, B and C and metoprolol prevented it in only group C.
Additive Effects of Word Frequency and Stimulus Quality: The Influence of Trial History and Data Transformations

ERIC Educational Resources Information Center

Balota, David A.; Aschenbrenner, Andrew J.; Yap, Melvin J.

2013-01-01

A counterintuitive and theoretically important pattern of results in the visual word recognition literature is that both word frequency and stimulus quality produce large but additive effects in lexical decision performance. The additive nature of these effects has recently been called into question by Masson and Kliegl (in press), who used linear…
Effects of different source additives and wilt conditions on the pH value, aerobic stability, and carbohydrate and protein fractions of alfalfa silage.

PubMed

Tao, Lian; Zhou, He; Zhang, Naifeng; Si, Bingwen; Tu, Yan; Ma, Tao; Diao, Qiyu

2017-01-01

To improve the silage quality and reduce the silage additive cost, the present experiment was designed to evaluate the potential of applying the fermented juice of epiphytic lactic acid bacteria (FJLB) as an additive in alfalfa silage. The effects of FJLB on the fermentation quality, carbohydrate and protein fractions, and aerobic stability of alfalfa silage wilted under five different conditions were investigated and compared with commercial lactic acid bacteria (CLAB) and the control. The FJLB application decreased the pH value, the volatile fatty acids and non-protein nitrogen content, and the loss of sugar by 9.9%, 22.9%, 19.6% and 9.6%, respectively; it increased the lactic acid concentration by 29.5% and the aerobic stability by 17 h in comparison to the control. The FJLB application also decreased the pH value (4.44 vs. 4.66) and volatile fatty acid content (38.32 vs. 44.82) and increased the lactic acid concentration (68.99 vs. 63.29) in comparison to the CLAB-treated silage. However, the FJLB treatment had lower aerobic stability (254 h vs. 274 h) than the CLAB treatment. The FJLB application improved silage quality in comparison to the control; in addition, its effect as a fermentation stimulant may be comparable to or even better than CLAB. © 2016 Japanese Society of Animal Science.
Aspirin has little additional anti-platelet effect in healthy volunteers receiving prasugrel.

PubMed

Leadbeater, P D M; Kirkby, N S; Thomas, S; Dhanji, A-R; Tucker, A T; Milne, G L; Mitchell, J A; Warner, T D

2011-10-01

Strong P2Y(12) blockade, as can be achieved with novel anti-platelet agents such as prasugrel, has been shown in vitro to inhibit both ADP and thromboxane A(2) -mediated pathways of platelet aggregation, calling into question the need for the concomitant use of aspirin. The present study investigated the hypothesis that aspirin provides little additional anti-aggregatory effect in a group of healthy volunteers taking prasugrel. STUDY PARTICIPANTS/METHODS: In all, 9 males, aged 18 to 40 years, enrolled into the 21-day study. Prasugrel was loaded at 60 mg on day 1 and maintained at 10 mg until day 21. At day 8, aspirin 75 mg was introduced and the dose increased to 300 mg on day 15. On days 0, 7, 14 and 21, platelet function was assessed by aggregometry, response to treatments was determined by VerifyNow and urine samples were collected for quantification of prostanoid metabolites. At day 7, aggregation responses to a range of platelet agonists were reduced and there was only a small further inhibition of aggregation to TRAP-6, collagen and epinephrine at days 14 and 21, when aspirin was included with prasugrel. Urinary prostanoid metabolites were unaffected by prasugrel, and were reduced by the addition of aspirin, independent of dose. In healthy volunteers, prasugrel produces a strong anti-aggregatory effect, which is little enhanced by the addition of aspirin. The addition of aspirin as a dual-therapy with potent P2Y(12) receptor inhibitors warrants further investigation. © 2011 International Society on Thrombosis and Haemostasis.
As-cast uranium-molybdenum based metallic fuel candidates and the effects of carbon addition

NASA Astrophysics Data System (ADS)

Blackwood, Van Stephen

The objective of this research was to develop and recommend a metallic nuclear fuel candidate that lowered the onset temperature of gamma phase formation comparable or better than the uranium-10 wt. pct. molybdenum alloy, offered a solidus temperature as high or higher than uranium-10 wt. pct. zirconium (1250°C), and stabilized the fuel phase against interaction with iron and steel at least as much as uranium-10 wt. pct. zirconium stabilized the fuel phase. Two new as-cast alloy compositions were characterized to assess thermal equilibrium boundaries of the gamma phase field and the effect of carbon addition up to 0.22 wt. pct. The first system investigated was uranium- x wt. pct. M where x ranged between 5-20 wt. pct. M was held at a constant ratio of 50 wt. pct. molybdenum, 43 wt. pct. titanium, and 7 wt. pct. zirconium. The second system investigated was the uranium-molybdenum-tungsten system in the range 90 wt. pct. uranium - 10 wt. pct. molybdenum - 0 wt. pct. tungsten to 80 wt. pct. uranium - 10 wt. pct. molybdenum - 10 wt. pct. tungsten. The results showed that the solidus temperature increased with increased addition of M up to 12.5 wt. pct. for the uranium-M system. Alloy additions of titanium and zirconium were removed from uranium-molybdenum solid solution by carbide formation and segregation. The uranium-molybdenum-tungsten system solidus temperature increased to 1218°C at 2.5 wt. pct. with no significant change in temperature up to 5 wt. pct. tungsten suggesting the solubility limit of tungsten had been reached. Carbides were observed with surrounding areas enriched in both molybdenum and tungsten. The peak solidus temperatures for the alloy systems were roughly the same at 1226°C for the uranium-M system and 1218°C for the uranium-molybdenum-tungsten system. The uranium-molybdenum-tungsten system required less alloy addition to achieve similar solidus temperatures as the uranium-M system.
Feed addition of curcumin to laying hens showed anticoccidial effect, and improved egg quality and animal health.

PubMed

Galli, Gabriela M; Da Silva, Aleksandro S; Biazus, Angelisa H; Reis, João H; Boiago, Marcel M; Topazio, Josué P; Migliorini, Marcos J; Guarda, Naiara S; Moresco, Rafael N; Ourique, Aline F; Santos, Cayane G; Lopes, Leandro S; Baldissera, Matheus D; Stefani, Lenita M

2018-06-01

The aim of this study was to evaluate whether the addition of curcumin in the diet of commercial laying hens could have an anticoccidial action and improve egg quality. For this, 60 laying hens were divided into three groups: T0 (the control group); T30 and T50 (30 and 50 mg/kg of curcumin in the feed, respectively). Eggs recently laid were collected on days 14 and 21 of the experiment, and stored for 21 days. It was observed increased specific gravity and yolk index in stored eggs of the groups T30 and T50 compared to T0. The yolk color reduced in the eggs stored from groups T30 and T50 compared to T0. Moreover, TBARS levels were lower in fresh and stored eggs from groups T30 and T50. It was observed increased TAC levels in fresh eggs from groups T30 and T50 and in stored eggs from the group T50. The presence of curcumin was not detected by HPLC in the yolk and albumen. Seric levels of albumin and uric acid did not differ between groups, while seric levels of total proteins increased on day 21 on groups T30 and T50. Finally, it was observed a significant reduction on the number of oocysts in fecal samples on days 14 and 21 of T30 and T50 compared to T0. Based on these evidences, it is possible to conclude that the addition of curcumin in the diet of laying hens has an anticoccidial effect and improves egg quality. Copyright © 2018 Elsevier Ltd. All rights reserved.
Asymmetric Aldol Additions: A Guided-Inquiry Laboratory Activity on Catalysis

ERIC Educational Resources Information Center

King, Jorge H. Torres; Wang, Hong; Yezierski, Ellen J.

2018-01-01

Despite the importance of asymmetric catalysis in both the pharmaceutical and commodity chemicals industries, asymmetric catalysis is under-represented in undergraduate chemistry laboratory curricula. A novel guided-inquiry experiment based on the asymmetric aldol addition was developed. Students conduct lab work to compare the effectiveness of…
[Effects of the frequency and intensity of nitrogen addition on soil pH, the contents of carbon, nitrogen and phosphorus in temperate steppe in Inner Mongolia, China.

PubMed

Zhou, Ji Dong; Shi, Rong Jiu; Zhao, Feng; Han, Si Qin; Zhang, Ying

2016-08-01

A four-year simulated nitrogen (N) deposition experiment involving nine N gradients and two N deposition frequencies (N was added either twice yearly or monthly) was conducted in Inner Mongolian grassland, to examine the effects of frequency and intensity of N addition on pH and the contents of carbon, nitrogen and phosphorus in soil. The results indicated that the soil pH and total phosphorus content, regardless of the N addition frequency, gradually decreased with the increase of N addition intensity. By contrast, the contents of soil available nitrogen and available phosphorus showed an increasing trend, while no significant variation in dissolved organic carbon (DOC) content was observed, and the contents of soil total carbon and total nitrogen had no change. Compared with the monthly N addition, the twice-a-year N addition substantially overestimated the effects of N deposition on decreasing the soil pH and increasing the available phosphorus content, but underestimated the effects of N deposition on increasing the soil available nitrogen content, and the significant difference was found in 0-5 cm soil layer.
Effects of nitrogen addition and fire on plant nitrogen use in a temperate steppe.

PubMed

Wei, Hai-Wei; Lü, Xiao-Tao; Lü, Fu-Mei; Han, Xing-Guo

2014-01-01

Plant nitrogen (N) use strategies have great implications for primary production and ecosystem nutrient cycling. Given the increasing atmospheric N deposition received by most of the terrestrial ecosystems, understanding the responses of plant N use would facilitate the projection of plant-mediated N cycling under global change scenarios. The effects of N deposition on plant N use would be affected by both natural and anthropogenic disturbances, such as prescribed fire in the grassland. We examined the effects of N addition (5.25 g N m(-2) yr(-1)) and prescribed fire (annual burning) on plant N concentrations and N use characters at both species and community levels in a temperate steppe of northern China. We found that N addition and fire independently affected soil N availability and plant N use traits. Nitrogen addition increased aboveground net primary productivity (ANPP), inorganic N, and N uptake, decreased N response efficiency (NRE), but did not affect biomass-weighed N concentrations at community level. Prescribed fire did not change the community level N concentrations, but largely decreased N uptake efficiency and NRE. At the species level, the effects of N addition and fire on plant N use were species-specific. The divergent responses of plant N use at community and species levels to N addition and fire highlight the importance of the hierarchical responses of plant N use at diverse biological organization levels to the alteration of soil N availability. This study will improve our understanding of the responses of plant-mediated N cycling to global change factors and ecosystem management strategies in the semiarid grasslands.
Multi-site study of additive genetic effects on fractional anisotropy of cerebral white matter: Comparing meta and megaanalytical approaches for data pooling.

PubMed

Kochunov, Peter; Jahanshad, Neda; Sprooten, Emma; Nichols, Thomas E; Mandl, René C; Almasy, Laura; Booth, Tom; Brouwer, Rachel M; Curran, Joanne E; de Zubicaray, Greig I; Dimitrova, Rali; Duggirala, Ravi; Fox, Peter T; Hong, L Elliot; Landman, Bennett A; Lemaitre, Hervé; Lopez, Lorna M; Martin, Nicholas G; McMahon, Katie L; Mitchell, Braxton D; Olvera, Rene L; Peterson, Charles P; Starr, John M; Sussmann, Jessika E; Toga, Arthur W; Wardlaw, Joanna M; Wright, Margaret J; Wright, Susan N; Bastin, Mark E; McIntosh, Andrew M; Boomsma, Dorret I; Kahn, René S; den Braber, Anouk; de Geus, Eco J C; Deary, Ian J; Hulshoff Pol, Hilleke E; Williamson, Douglas E; Blangero, John; van 't Ent, Dennis; Thompson, Paul M; Glahn, David C

2014-07-15

Combining datasets across independent studies can boost statistical power by increasing the numbers of observations and can achieve more accurate estimates of effect sizes. This is especially important for genetic studies where a large number of observations are required to obtain sufficient power to detect and replicate genetic effects. There is a need to develop and evaluate methods for joint-analytical analyses of rich datasets collected in imaging genetics studies. The ENIGMA-DTI consortium is developing and evaluating approaches for obtaining pooled estimates of heritability through meta-and mega-genetic analytical approaches, to estimate the general additive genetic contributions to the intersubject variance in fractional anisotropy (FA) measured from diffusion tensor imaging (DTI). We used the ENIGMA-DTI data harmonization protocol for uniform processing of DTI data from multiple sites. We evaluated this protocol in five family-based cohorts providing data from a total of 2248 children and adults (ages: 9-85) collected with various imaging protocols. We used the imaging genetics analysis tool, SOLAR-Eclipse, to combine twin and family data from Dutch, Australian and Mexican-American cohorts into one large "mega-family". We showed that heritability estimates may vary from one cohort to another. We used two meta-analytical (the sample-size and standard-error weighted) approaches and a mega-genetic analysis to calculate heritability estimates across-population. We performed leave-one-out analysis of the joint estimates of heritability, removing a different cohort each time to understand the estimate variability. Overall, meta- and mega-genetic analyses of heritability produced robust estimates of heritability. Copyright © 2014 Elsevier Inc. All rights reserved.
Additivity pretraining and cue competition effects: developmental evidence for a reasoning-based account of causal learning.

PubMed

Simms, Victoria; McCormack, Teresa; Beckers, Tom

2012-04-01

The effect of additivity pretraining on blocking has been taken as evidence for a reasoning account of human and animal causal learning. If inferential reasoning underpins this effect, then developmental differences in the magnitude of this effect in children would be expected. Experiment 1 examined cue competition effects in children's (4- to 5-year-olds and 6- to 7-year-olds) causal learning using a new paradigm analogous to the food allergy task used in studies of human adult causal learning. Blocking was stronger in the older than the younger children, and additivity pretraining only affected blocking in the older group. Unovershadowing was not affected by age or by pretraining. In experiment 2, levels of blocking were found to be correlated with the ability to answer questions that required children to reason about additivity. Our results support an inferential reasoning explanation of cue competition effects. (c) 2012 APA, all rights reserved.
Comparative Effects of Stimulant Drugs in Hyperkinetic Children.

ERIC Educational Resources Information Center

Conners, C. Keith

The study compared the efficacy, side effects, and safety of magnesium pemoline (Cylert) and destroamphetamine (Dexedrine) as compared with placebo. Subjects were 81 children, ages 6-12 years, who evidenced one or more signs of minimal brain dysfunction, and were referred with major complaints of hyperactivity, short attention span,…
Beneficial effect of mixture of additives amendment on enzymatic activities, organic matter degradation and humification during biosolids co-composting.

PubMed

Awasthi, Mukesh Kumar; Wang, Quan; Chen, Hongyu; Awasthi, Sanjeev Kumar; Wang, Meijing; Ren, Xiuna; Zhao, Junchao; Zhang, Zengqiang

2018-01-01

The objective of this study was to identify the effect of mixture of additives to improve the enzymatic activities, organic matter humification and diminished the bioavailability of heavy metals (HMs) during biosolids co-composting. In this study, zeolite (Z) (10%, 15% and 30%) with 1%lime (L) (dry weight basis of biosolids) was blended into the mixture of biosolids and wheat straw, respectively. The without any amendment and 1%lime applied treatments were run for comparison (Control). The Z+L addition resulted rapid organic matter degradation and humification with maximum enzymatic activities. In addition, higher dosage of Z+1%L amendment reduced the bioavailability of HMs (Cu and Zn) and improved the end product quality as compared to control and 1%L applied treatments. However, the 30%Z+1%L applied treatment showed maximum humification and low bioavailability of HMs but considering the economic feasibility and compost quality results, the treatment with 10%Z+1%L is recommended for biosolids co-composting. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effect of eubiotic feed additives on the performance of growing pigs and the activity of intestinal microflora.

PubMed

Nowak, Piotr; Kasprowicz-Potocka, Małgorzata; Zaworska, Anita; Nowak, Włodzimierz; Stefańska, Barbara; Sip, Anna; Grajek, Włodzimierz; Juzwa, Wojciech; Taciak, Marcin; Barszcz, Marcin; Tuśnio, Anna; Grajek, Katarzyna; Foksowicz-Flaczyk, Joanna; Frankiewicz, Andrzej

2017-12-01

The aim of this study was to compare the effect of probiotic bacteria, prebiotics, phytobiotics and their combinations on performance and microbial activity in the digestive tract of growing pigs. The experiment was conducted over 28 d on 48 male pigs of about 12 kg body weight (BW), which were allocated to following treatments.: (1) Control Group (Con) without additive, (2) Group I, addition of a prebiotic (inulin), (3) Group Ph, a phytobiotic (herbal water extracts), (4) Group P, a probiotic composed of four strains of lactic acid bacteria, (5) Group PhP, phytobiotic and probiotic bacteria and (6) Group PhPI, a phytobiotic, probiotic bacteria and a prebiotic. Animal performance was recorded and at d 28 six pigs from each group were euthanised to collect digesta samples. In all groups except for Group I, diarrhoea incidents were observed. Groups Ph and P had significantly higher daily gains and final BW, and Group Ph utilised feed better than other groups. The pH of ileal digesta was significantly lower in Group PhPI. In the caecal digesta of Groups I, P and PhP, the pH level was lower than in the other groups but dry matter contents was significantly higher in Groups Con and I. The short-chain fatty acids and particular acid content differed significantly only in the colonic digesta. The yeast and mould numbers in caecal digesta was highest in Group Con. No treatment effects were observed for the number of lactic acid bacteria, coli group bacteria or Clostridium. However, the observed significantly higher number of total bacteria suggests that a multi-component eubiotic treatment changes the bacterial composition and distribution more effectively. Our findings indicated that all used additives changed the intestinal microflora, but the multi-component eubiotics were not beneficial as feed additives offered separately. Moreover, supplementation of phytobiotics and probiotic bacteria also improved the animal performance significantly.
Effect on the operation properties of DMBR with the addition of GAC

NASA Astrophysics Data System (ADS)

Lin, Jizhi; Zhang, Qian; Hong, Junming

2017-01-01

The membrane bioreactor and dynamic membrane bioreactor were used to examine the effect of granular activated carbon (GAC) on the treatment of synthetic wastewater. After the addition of different volume fractions GAC in the DMBR, the operation parameters, effluent COD, NH4 +-N, NO3 --N, TN concentrations and sludge viscosity of the bioreactor was investigated. The results showed that the addition of GAC could relieve the membrane fouling and improve the removal efficiencies of pollutants in the DMBR. The effluent concentrations of pollutants were linear correlation with the addition of volume fractions of GAC in the bioreactor. The value of R2 of each modulation was almost more than 0.9. The sludge viscosity was almost not affected by the volume fractions of GAC in the bioreactor. The best volume fractions of GAC were 20% in the DMBR.
Developments in Post-marketing Comparative Effectiveness Research

PubMed Central

S, Schneeweiss

2010-01-01

Physicians and insurers need to weigh the effectiveness of new drugs against existing therapeutics in routine care to make decisions about treatment and formularies. Because Food and Drug Administration (FDA) approval of most new drugs requires demonstrating efficacy and safety against placebo, there is limited interest by manufacturers in conducting such head-to-head trials. Comparative effectiveness research seeks to provide head-to-head comparisons of treatment outcomes in routine care. Health-care utilization databases record drug use and selected health outcomes for large populations in a timely way and reflect routine care, and therefore may be the preferred data source for comparative effectiveness research. Confounding caused by selective prescribing based on indication, severity, and prognosis threatens the validity of non-randomized database studies that often have limited details on clinical information. Several recent developments may bring the field closer to acceptable validity, including approaches that exploit the concepts of proxy variables using high-dimensional propensity scores, within-patient variation of drug exposure using crossover designs, and between-provider variation in prescribing preference using instrumental variable (IV) analyses. PMID:17554243
Developments in post-marketing comparative effectiveness research.

PubMed

Schneeweiss, S

2007-08-01

Physicians and insurers need to weigh the effectiveness of new drugs against existing therapeutics in routine care to make decisions about treatment and formularies. Because Food and Drug Administration (FDA) approval of most new drugs requires demonstrating efficacy and safety against placebo, there is limited interest by manufacturers in conducting such head-to-head trials. Comparative effectiveness research seeks to provide head-to-head comparisons of treatment outcomes in routine care. Health-care utilization databases record drug use and selected health outcomes for large populations in a timely way and reflect routine care, and therefore may be the preferred data source for comparative effectiveness research. Confounding caused by selective prescribing based on indication, severity, and prognosis threatens the validity of non-randomized database studies that often have limited details on clinical information. Several recent developments may bring the field closer to acceptable validity, including approaches that exploit the concepts of proxy variables using high-dimensional propensity scores, within-patient variation of drug exposure using crossover designs, and between-provider variation in prescribing preference using instrumental variable (IV) analyses.
Using generalized additive (mixed) models to analyze single case designs.

PubMed

Shadish, William R; Zuur, Alain F; Sullivan, Kristynn J

2014-04-01

This article shows how to apply generalized additive models and generalized additive mixed models to single-case design data. These models excel at detecting the functional form between two variables (often called trend), that is, whether trend exists, and if it does, what its shape is (e.g., linear and nonlinear). In many respects, however, these models are also an ideal vehicle for analyzing single-case designs because they can consider level, trend, variability, overlap, immediacy of effect, and phase consistency that single-case design researchers examine when interpreting a functional relation. We show how these models can be implemented in a wide variety of ways to test whether treatment is effective, whether cases differ from each other, whether treatment effects vary over cases, and whether trend varies over cases. We illustrate diagnostic statistics and graphs, and we discuss overdispersion of data in detail, with examples of quasibinomial models for overdispersed data, including how to compute dispersion and quasi-AIC fit indices in generalized additive models. We show how generalized additive mixed models can be used to estimate autoregressive models and random effects and discuss the limitations of the mixed models compared to generalized additive models. We provide extensive annotated syntax for doing all these analyses in the free computer program R. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.
Effects of addition of different fibers on rheological characteristics of cake batter and quality of cakes.

PubMed

Aydogdu, Ayca; Sumnu, Gulum; Sahin, Serpil

2018-02-01

The aim of this study was to investigate the effects of addition of dietary fibers on rheological properties of batter and cake quality. Wheat flour was replaced by 5 and 10% (wt%) oat, pea, apple and lemon fibers. All cake batters showed shear thinning behavior. Incorporation of fibers increased consistency index (k), storage modulus (G') and loss modulus (G″). As quality parameters, specific volume, hardness, weight loss, color and microstructure of cakes were investigated. Cakes containing oat and pea fibers (5%) had similar specific volume and texture with control cakes which contained no fiber. As fiber concentration increased, specific volume decreased but hardness increased. No significant difference was found between weight loss of control cake and cakes with oat, pea and apple fibers. Lemon fiber enriched cakes had the lowest specific volume, weight loss and color difference. When microstructural images were examined, it was seen that control cake had more porous structure than fiber enriched cakes. In addition, lemon and apple fiber containing cakes had less porous crumb structure as compared to oat and pea containing ones. Oat and pea fiber (5%) enriched cakes had similar physical properties (volume, texture and color) with control cakes.
Comparing Time-Dependent Geomagnetic and Atmospheric Effects on Cosmogenic Nuclide Production Rate Scaling

NASA Astrophysics Data System (ADS)

Lifton, N. A.

2014-12-01

A recently published cosmogenic nuclide production rate scaling model based on analytical fits to Monte Carlo simulations of atmospheric cosmic ray flux spectra (both of which agree well with measured spectra) (Lifton et al., 2014, Earth Planet. Sci. Lett. 386, 149-160: termed the LSD model) provides two main advantages over previous scaling models: identification and quantification of potential sources of bias in the earlier models, and the ability to generate nuclide-specific scaling factors easily for a wide range of input parameters. The new model also provides a flexible framework for exploring the implications of advances in model inputs. In this work, the scaling implications of two recent time-dependent spherical harmonic geomagnetic models spanning the Holocene will be explored. Korte and Constable (2011, Phys. Earth Planet. Int. 188, 247-259) and Korte et al. (2011, Earth Planet. Sci. Lett. 312, 497-505) recently updated earlier spherical harmonic paleomagnetic models used by Lifton et al. (2014) with paleomagnetic measurements from sediment cores in addition to archeomagnetic and volcanic data. These updated models offer improved accuracy over the previous versions, in part to due to increased temporal and spatial data coverage. With the new models as input, trajectory-traced estimates of effective vertical cutoff rigidity (RC- the standard method for ordering cosmic ray data) yield significantly different time-integrated scaling predictions when compared to the earlier models. These results will be compared to scaling predictions using another recent time-dependent spherical harmonic model of the Holocene geomagnetic field by Pavón-Carrasco et al. (2014, Earth Planet. Sci. Lett. 388, 98-109), based solely on archeomagnetic and volcanic paleomagnetic data, but extending to 14 ka. In addition, the potential effects of time-dependent atmospheric models on LSD scaling predictions will be presented. Given the typical dominance of altitudinal over
A cost-effectiveness analysis comparing different strategies to implement noninvasive prenatal testing into a Down syndrome screening program.

PubMed

Ayres, Alice C; Whitty, Jennifer A; Ellwood, David A

2014-10-01

Currently, noninvasive prenatal testing (NIPT) is only recommended in high-risk women following conventional Down syndrome (DS) screening, and it has not yet been included in the Australian DS screening program. To evaluate the cost-effectiveness of different strategies of NIPT for DS screening in comparison with current practice. A decision-analytic approach modelled a theoretical cohort of 300,000 singleton pregnancies. The strategies compared were the following: current practice, NIPT as a second-tier investigation, NIPT only in women >35 years, NIPT only in women >40 years and NIPT for all women. The direct costs (low and high estimates) were derived using both health system costs and patient out-of-pocket expenses. The number of DS cases detected and procedure-related losses (PRL) were compared between strategies. The incremental cost per case detected was the primary measure of cost-effectiveness. Universal NIPT costs an additional $134,636,832 compared with current practice, but detects 123 more DS cases (at an incremental cost of $1,094,608 per case) and avoids 90 PRL. NIPT for women >40 years was the most cost-effective strategy, costing an incremental $81,199 per additional DS case detected and avoiding 95 PRL. The cost of NIPT needs to decrease significantly if it is to replace current practice on a purely cost-effectiveness basis. However, it may be beneficial to use NIPT as first-line screening in selected high-risk patients. Further evaluation is needed to consider the longer-term costs and benefits of screening. © 2014 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.
Comparing the effects of low-dose contraceptive pills to control dysfunctional uterine bleeding by oral and vaginal methods.

PubMed

Mehrabian, Ferdous; Abbassi, Fariba

2013-09-01

Background and Objective : Contraceptive pills are generally taken orally and can cause side effects such as nausea, vomiting and hypertension. The vaginal use of these pills can reduce such complications. Our objective was to compare the efficacy and side effects of low dose contraceptive pills by oral and vaginal route in the management of dysfunctional uterine bleeding-(DUB) Methods: This comparative observational study was conducted at Beheshti and Alzahra (SA) teaching hospitals, affiliated to Isfahan University of Medical Sciences in 2010-2011. One hundred women who presented with DUB were randomly assigned into two groups of equal number, receiving the low dose oral contraceptive pills by oral or vaginal route for three month. The amount and duration of bleeding were compared at the beginning and at the end of the study and side effects by these two methods compared. The results of this study showed that both oral and vaginal routes effectively reduced the duration and amount of bleeding due to DUB after three courses of treatment. This effect was better in the vaginal method compared with oral administration (P = 0.03). Regarding the side effects, nausea and vomiting were significantly higher in the oral group than in the vaginal group (P = 0.03). Vulvovaginitis infection was more frequent in the vaginal group than in the oral group (P = 0.03). Low dose contraceptive pills are effective in reducing the amount, time, and duration of bleeding in patients with DUB. In addition, reduction of gastrointestinal side effects by vaginal route helps to use these pills by the patient with proper training of physicians, midwives and patients.
Effect of Sr Additive Amount and Holding Time on Microstructure of A390 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Zhang, J. H.; Xing, S. M.; Han, Q. Y.; Guo, Q.; Wang, R. F.

2017-11-01

The microstructure of A390 alloy under different Sr additive amounts and holding times was studied by means of direct reading spectrum analysis, energy spectrum analysis, optical microscope and electron microscope. The results show that Sr has a good modification to eutectic Si, while it has a negative effect on primary silicon. The Sr addition will increase the size of primary silicon. When the addition amount of Al-10Sr alloy is 0.6%, the modification of eutectic silicon is the optimum. The Sr has a short incubation period and a fine modification at 10min, but it is more serious burning rate in small furnace smelting, and the modification effect disappears basically after 100min.
The effects of chemical additives on the production of disinfection byproducts and ecotoxicity in simulated ballast water

NASA Astrophysics Data System (ADS)

Park, Chul; Cha, Hyung-Gon; Lee, Ji-Hyun; Choi, Tae Seop; Lee, Jungsuk; Kim, Young-Hee; Bae, Minjung; Shin, Kyoungsoon; Choi, Keun-Hyung

2017-11-01

The management of ship ballast water is essential to stemming the introduction of non-indigenous species. Approval for onboard installation of a system to treat ballast water requires rigorous land-based testing as dictated in the G8 guideline by the International Maritime Organization. However, this testing lacks standardization-most notably augmentation of organic carbon for influent water by adding chemical additives. Electrochlorination is a popular treatment method for ballast water, in which chlorinated oxidants react with organisms and organic matter in water. The additives could thus affect the treatment efficacy of the ballast water. Here, we examined the effects of several candidates of organic carbon additives on the consumption of total residual oxidant (TRO), the production of disinfection byproducts (DBPs), plankton survival, and ecotoxicity. The TRO consumption over five days of storage was higher in electrochlorinated seawater amended with lignin and Metamucil when compared with seawaters with other organic carbon compounds. DBP production varied by almost two orders of magnitude as a function of the various additives. This was largely attributed to the production of tribromomethane and dibromoacetic acid. The survival of Artemia franciscana was significantly different across waters of different organic carbon additives. Algal toxicity testing with the marine haptophyte Isochrysis galbana significantly reduced growth in lignin- and Metamucil-treated seawaters, but not with other organic carbon compounds. Bioluminescence in Vibrio fischeri sharply declined in electrochlorinated seawaters with all types of organic carbon compounds, but no toxicity was manifested once the electrochlorinated seawaters were neutralized with sodium thiosulfate. The varying degrees of outcome suggest that it might be better to eliminate the requirements of adding organic carbon to test water as long as natural water was used for land-based testing of BWMS. If needed, the
Effect of the addition of SF6 and N2 in inductively coupled SiCl4 plasma for GaN etching

NASA Astrophysics Data System (ADS)

Oubensaid, E. H.; Duluard, C. Y.; Pichon, L. E.; Pereira, J.; Boufnichel, M.; Lefaucheux, P.; Dussart, R.; Ranson, P.

2009-07-01

The GaN etching by SiCl4 plasma is considered in an ICP tool. By respecting some material limitations, it has been possible to etch the gallium nitride in pure SiCl4 plasma, with an etch rate of 19 nm min-1. This result is comparable to other reported results. Thereafter, the combination of SiCl4 with SF6 and N2 was tested in order to increase the etch rate. The addition of SF6 in the plasma has enabled us to reach an etch rate of 53 nm min-1. However, best results were obtained with the addition of N2, with an increase of the etch rate by a factor of 6. Mass spectrometry was also performed in order to determine the effects of the additional gases. The surface morphology of the GaN was also analysed by scanning electron microscope after etching.
Effects of the food additive, citric acid, on kidney cells of mice.

PubMed

Chen, Xg; Lv, Qx; Liu, Ym; Deng, W

2015-01-01

Citric acid is a food additive that is widely used in the food and drink industry. We investigated the effects of citric acid injection on mouse kidney. Forty healthy mice were divided into four groups of 10 including one control group and three citric acid-treated groups. Low dose, middle dose and high dose groups were given doses of 120, 240 and 480 mg/kg of citric acid, respectively. On day 7, kidney tissues were collected for histological, biochemical and molecular biological examination. We observed shrinkage of glomeruli, widened urinary spaces and capillary congestion, narrowing of the tubule lumen, edema and cytoplasmic vacuolated tubule cells, and appearance of pyknotic nuclei. The relation between histopathological changes and citric acid was dose dependent. Compared to the control, T-SOD and GSH-Px activities in the treated groups decreased with increasing doses of citric acid, NOS activity tended to increase, and H2O2 and MDA contents gradually decreased, but the differences between any treated group and the control were not statistically significant. The apoptosis assay showed a dose-dependent increase of caspase-3 activity after administering citrate that was statistically significant. DNA ladder formation occurred after treatment with any dose of citric acid. We concluded that administration of citric acid may cause renal toxicity in mice.
Acceptable aluminum additions for minimal environmental effect in iron-aluminum alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sikka, V.K.; Viswanathan, S.; Vyas, S.

A systematic study of iron-aluminum alloys has shown that Fe-16 at. % Al alloys are not very sensitive to environmental embrittlement. The Fe-22 and -28 at. % Al alloys are sensitive to environmental embrittlement, and the effect can be reduced by the addition of chromium and through the control of grain size by additions of zirconium and carbon. The Fe-16 at. % Al binary, and alloys based on it, yielded over 20% room-temperature (RT) elongation even after high-temperature annealing treatments at 1100[degree]C. The best values for the Fe-22 and -28 at. % Al-base alloys after similar annealing treatments were 5more » and 10%, respectively. A multicomponent alloy, FAP, based on Fe- 16 at. % Al was designed, which gave an RT ductility of over 25%.« less
Acceptable aluminum additions for minimal environmental effect in iron-aluminum alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sikka, V.K.; Viswanathan, S.; Vyas, S.

A systematic study of iron-aluminum alloys has shown that Fe-16 at. % Al alloys are not very sensitive to environmental embrittlement. The Fe-22 and -28 at. % Al alloys are sensitive to environmental embrittlement, and the effect can be reduced by the addition of chromium and through the control of grain size by additions of zirconium and carbon. The Fe-16 at. % Al binary, and alloys based on it, yielded over 20% room-temperature (RT) elongation even after high-temperature annealing treatments at 1100{degree}C. The best values for the Fe-22 and -28 at. % Al-base alloys after similar annealing treatments were 5more » and 10%, respectively. A multicomponent alloy, FAP, based on Fe- 16 at. % Al was designed, which gave an RT ductility of over 25%.« less
Effect of boron addition on injection molded 316L stainless steel: mechanical, corrosion properties and in vitro bioactivity.

PubMed

Bayraktaroglu, Esra; Gulsoy, H Ozkan; Gulsoy, Nagihan; Er, Ozay; Kilic, Hasan

2012-01-01

The research was investigated the effect of boron additions on sintering characteristics, mechanical, corrosion properties and biocompatibility of injection molded austenitic grade 316L stainless steel. Addition of boron is promoted to get high density of sintered 316L stainless steels. The amount of boron plays a role in determining the sintered microstructure and all properties. In this study, 316L stainless steel powders have been used with the elemental NiB powders. A feedstock containing 62.5 wt% powders loading was molded at different injection molded temperature. The binders were completely removed from molded components by solvent and thermal debinding at different temperature. The debinded samples were sintered at different temperature for 60 min. Mechanical property, microstructural characterization and electrochemical property of the sintered samples were performed using tensile testing, hardness, optical, scanning electron microscopy and electrochemical corrosion experiments. Sintered samples were immersed in a simulated body fluid (SBF) with elemental concentrations that were comparable to those of human blood plasma for a total period of 15 days. Both materials were implanted in fibroblast culture for biocompatibility evaluations were carried out. Results of study showed that sintered 316L and 316L with NiB addition samples exhibited high mechanical and corrosion properties in a physiological environment. Especially, 316L with NiB addition can be used in some bioapplications.
Addition of Alarm Pheromone Components Improves the Effectiveness of Desiccant Dusts Against Cimex lectularius

PubMed Central

BENOIT, JOSHUA B.; PHILLIPS, SETH A.; CROXALL, TRAVIS J.; CHRISTENSEN, BRADY S.; YODER, JAY A.; DENLINGER, DAVID L.

2009-01-01

We demonstrate that the addition of bed bug, Cimex lectularius, alarm pheromone to desiccant formulations greatly enhances their effectiveness during short-term exposure. Two desiccant formulations, diatomaceous earth (DE) and Dri-die (silica gel), were applied at the label rate with and without bed bug alarm pheromone components, (E)-2-hexenal, (E)-2-octenal, and a (E)-2-hexenal:(E)-2-octenal blend. First-instar nymphs and adult females were subjected to 10-min exposures, and water loss rates were used to evaluate the response. Optimal effectiveness was achieved with a pheromone concentration of 0.01 M. With Dri-die alone, the water loss was 21% higher than in untreated controls, and water loss increased nearly two times with (E)-2-hexenal and (E)-2-octenal and three times with the (E)-2-hexenal: (E)-2-octenal blend. This shortened survival of first-instar nymphs from 4 to 1 d, with a similar reduction noted in adult females. DE was effective only if supplemented with pheromone, resulting in a 50% increase in water loss over controls with the (E)-2-hexenal:(E)-2-octenal blend, and a survival decrease from 4 to 2 d in first-instar nymphs. Consistently, the addition of the pheromone blend to desiccant dust was more effective than adding either component by itself or by using Dri-die or DE alone. Based on observations in a small microhabitat, the addition of alarm pheromone components prompted bed bugs to leave their protective harborages and to move through the desiccant, improving the use of desiccants for control. We concluded that short exposure to Dri-die is a more effective treatment against bed bugs than DE and that the effectiveness of the desiccants can be further enhanced by incorporation of alarm pheromone. Presumably, the addition of alarm pheromone elevates excited crawling activity, thereby promoting cuticular changes that increase water loss. PMID:19496429
Effect of oxygen compounds addition on the hydrocracking of coal derived liquid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sato, Yoshiki; Kodera, Yoichi; Kamo, Tohru

1998-12-31

Coal derived liquid from liquefaction, coking and low temperature pyrolysis contains considerable amounts of alkylphenols with alkylbenzenes and alkylnaphthalenes. To produce and purify useful chemicals from coal-derived liquid, hydrocracking and hydrotreating of alkylphenol mixture is a very important process. In this study the effects of oxygen compounds such as dimethylcarbonate (DMC) addition on the hydrocracking of alkylphenols and coal-derived liquid were investigated to decrease hydrogen consumption due to the production of water from the removal of OH group. From the hydrocracking of 3,5-dimethylphenol (3,5-DMP) without DMC at 700 C, residence time of 3--10 sec under hydrogen-to-reactant molar ratio of moremore » than 10 using atmospheric flow apparatus with quartz reactor, m-xylene and m-cresol were produced with the production ratio of 1:1.8. However the dehydroxylation to produce m-xylene was decreased by the addition of 10% DMC with the 50% increased production ratio of 1:2.7. These are considered due to the strong interaction between OH group and DMC. Similar reaction behavior was observed in the hydrocracking of 2,5-DMP and the production ratio of (o-cresol + m-cresol)/p-xylene slightly increased from 3.0 to 3.5 by the addition of DMC. On the other hand, the products distribution did not change with and without DMC in the case of 2,6-DMP. This indicates the interaction is hindered by steric effect by the neighboring CH{sub 3} group. The effect of other oxygen compounds on the hydrocracking and the products distribution from the hydrocracking of coal-derived liquids is also discussed.« less
Thermal processing of EVA encapsulants and effects of formulation additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pern, F.J.; Glick, S.H.

1996-05-01

The authors investigated the in-situ processing temperatures and effects of various formulation additives on the formation of ultraviolet (UV) excitable chromophores, in the thermal lamination and curing of ethylene-vinyl acetate (EVA) encapsulants. A programmable, microprocessor-controlled, double-bag vacuum laminator was used to study two commercial as formulated EVA films, A9918P and 15295P, and solution-cast films of Elvaxrm (EVX) impregnated with various curing agents and antioxidants. The results show that the actual measured temperatures of EVA lagged significantly behind the programmed profiles for the heating elements and were affected by the total thermal mass loaded inside the laminator chamber. The antioxidant Naugardmore » P{trademark}, used in the two commercial EVA formulations, greatly enhances the formation of UV-excitable, short chromophores upon curing, whereas other tested antioxidants show little effect. A new curing agent chosen specifically for the EVA formulation modification produces little or no effect on chromophore formation, no bubbling problems in the glass/EVX/glass laminates, and a gel content of {approximately}80% when cured at programmed 155{degrees}C for 4 min. Also demonstrated is the greater discoloring effect with higher concentrations of curing-generated chromophores.« less
Ionic Liquids as Novel Lubricants and /or Lubricant Additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, J.; Viola, M. B.

2013-10-31

This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction inmore » mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.« less

Comparative Effectiveness of After-School Programs to Increase Physical Activity

PubMed Central

Gesell, Sabina B.; Sommer, Evan C.; Lambert, E. Warren; Vides de Andrade, Ana Regina; Davis, Lauren; Beech, Bettina M.; Mitchell, Stephanie J.; Neloms, Stevon; Ryan, Colleen K.

2013-01-01

Background. We conducted a comparative effectiveness analysis to evaluate the difference in the amount of physical activity children engaged in when enrolled in a physical activity-enhanced after-school program based in a community recreation center versus a standard school-based after-school program. Methods. The study was a natural experiment with 54 elementary school children attending the community ASP and 37 attending the school-based ASP. Accelerometry was used to measure physical activity. Data were collected at baseline, 6 weeks, and 12 weeks, with 91% retention. Results. At baseline, 43% of the multiethnic sample was overweight/obese, and the mean age was 7.9 years (SD = 1.7). Linear latent growth models suggested that the average difference between the two groups of children at Week 12 was 14.7 percentage points in moderate-vigorous physical activity (P < .001). Cost analysis suggested that children attending traditional school-based ASPs—at an average cost of $17.67 per day—would need an additional daily investment of $1.59 per child for 12 weeks to increase their moderate-vigorous physical activity by a model-implied 14.7 percentage points. Conclusions. A low-cost, alternative after-school program featuring adult-led physical activities in a community recreation center was associated with increased physical activity compared to standard-of-care school-based after-school program. PMID:23984052
Occurrence and effects of plastic additives on marine environments and organisms: A review.

PubMed

Hermabessiere, Ludovic; Dehaut, Alexandre; Paul-Pont, Ika; Lacroix, Camille; Jezequel, Ronan; Soudant, Philippe; Duflos, Guillaume

2017-09-01

Plastics debris, especially microplastics, have been found worldwide in all marine compartments. Much research has been carried out on adsorbed pollutants on plastic pieces and hydrophobic organic compounds (HOC) associated with microplastics. However, only a few studies have focused on plastic additives. These chemicals are incorporated into plastics from which they can leach out as most of them are not chemically bound. As a consequence of plastic accumulation and fragmentation in oceans, plastic additives could represent an increasing ecotoxicological risk for marine organisms. The present work reviewed the main class of plastic additives identified in the literature, their occurrence in the marine environment, as well as their effects on and transfers to marine organisms. This work identified polybrominated diphenyl ethers (PBDE), phthalates, nonylphenols (NP), bisphenol A (BPA) and antioxidants as the most common plastic additives found in marine environments. Moreover, transfer of these plastic additives to marine organisms has been demonstrated both in laboratory and field studies. Upcoming research focusing on the toxicity of microplastics should include these plastic additives as potential hazards for marine organisms, and a greater focus on the transport and fate of plastic additives is now required considering that these chemicals may easily leach out from plastics. Copyright © 2017 Elsevier Ltd. All rights reserved.
Constant-Pressure Combustion Charts Including Effects of Diluent Addition

NASA Technical Reports Server (NTRS)

Turner, L Richard; Bogart, Donald

1949-01-01

Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.
Including non-additive genetic effects in Bayesian methods for the prediction of genetic values based on genome-wide markers

PubMed Central

2011-01-01

Background Molecular marker information is a common source to draw inferences about the relationship between genetic and phenotypic variation. Genetic effects are often modelled as additively acting marker allele effects. The true mode of biological action can, of course, be different from this plain assumption. One possibility to better understand the genetic architecture of complex traits is to include intra-locus (dominance) and inter-locus (epistasis) interaction of alleles as well as the additive genetic effects when fitting a model to a trait. Several Bayesian MCMC approaches exist for the genome-wide estimation of genetic effects with high accuracy of genetic value prediction. Including pairwise interaction for thousands of loci would probably go beyond the scope of such a sampling algorithm because then millions of effects are to be estimated simultaneously leading to months of computation time. Alternative solving strategies are required when epistasis is studied. Methods We extended a fast Bayesian method (fBayesB), which was previously proposed for a purely additive model, to include non-additive effects. The fBayesB approach was used to estimate genetic effects on the basis of simulated datasets. Different scenarios were simulated to study the loss of accuracy of prediction, if epistatic effects were not simulated but modelled and vice versa. Results If 23 QTL were simulated to cause additive and dominance effects, both fBayesB and a conventional MCMC sampler BayesB yielded similar results in terms of accuracy of genetic value prediction and bias of variance component estimation based on a model including additive and dominance effects. Applying fBayesB to data with epistasis, accuracy could be improved by 5% when all pairwise interactions were modelled as well. The accuracy decreased more than 20% if genetic variation was spread over 230 QTL. In this scenario, accuracy based on modelling only additive and dominance effects was generally superior to
Barnidipine compared to lercanidipine in addition to losartan on endothelial damage and oxidative stress parameters in patients with hypertension and type 2 diabetes mellitus.

PubMed

Derosa, Giuseppe; Mugellini, Amedeo; Pesce, Rosa Maria; D'Angelo, Angela; Maffioli, Pamela

2016-04-12

Essential hypertension has been extensively reported to cause endothelial dysfunction. The aim of this study was to evaluate the effects of barnidipine or lercanidipine, in addition to losartan, on some parameters indicative of endothelial damage and oxidative stress in hypertensive, type 2 diabetic patients. One hundred and fifty one patients were randomised to barnidipine, 20 mg/day, or lercanidipine, 20 mg/day, both in addition to losartan, 100 mg/day, for 6 months. We assessed BP every month, in addition, patients underwent ambulatory blood pressure monitoring (ABPM). We also assessed: fasting plasma glucose (FPG), glycated hemoglobin (HbA1c), some markers such as high-sensitivity C-reactive protein (Hs-CRP), tumor necrosis factor-α (TNF-α), metalloproteinase-2 (MMP-2) and -9 (MMP-9), soluble vascular adhesion protein-1 (sVCAM-1), soluble intercellular adhesion protein-1 (sICAM-1), isoprostanes and paraoxonase-1 (PON-1). Both barnidipine and lercanidipine resulted in a significant reduction in blood pressure, even if the reduction obtained with barnidipine + losartan was greater than that obtained with lercanidipine + losartan. Data recorded with ABPM also showed a similar trend. Barnidipine + losartan reduced the levels of Hs-CRP, TNF-α, sVCAM-1, sICAM-1, and isoprostanes both compared to baseline and to lercanidipine + losartan. Barnidipine + losartan gave an improvement of some parameters indicative of endothelial damage and oxidative stress in diabetic and hypertensive patients. NCT02064218 , ClinicalTrials.gov.
Additive-induced aggregate changes of two structurally similar dyes in aqueous solutions: A comparative photophysical study

NASA Astrophysics Data System (ADS)

Ghanadzadeh Gilani, A.; Poormohammadi-Ahandani, Z.; Kian, R.

2018-01-01

Absorption and emission spectral characteristics of the two structurally similar phenothiazine dyes, azure B and toluidine blue, in aqueous solutions of the two sets of molecular additives (ureas and monosaccharides) were studied as a function of the dye and additive concentrations. The absorption spectra of the dyes were also studied in pure tetramethylurea with an aprotic nature. The spectral data were analyzed using DECOM Program. The dimer structure of the interacting molecules in these dyes was discussed using the exciton model. The urea class of additives was found to act as water structure-breakers over the range of studied concentration. The carbohydrate additives were found to act as water structure-breakers at low concentrations. However, the water structure breaking process may be disfavored by the additive-additive interactions at higher concentrations. It can be concluded that at low additive concentrations, the main driving force for breaking the dye association is water-additive interaction, which disrupts the water hydrogen bonds induced by the additives. However, at the high additive concentrations, the different phenomena including additive-additive and additive-dye interactions can change the structure, strength, and aggregative properties of the dyes. Finally, the urea in water induces noticeably fluorescence quenching in emission spectra of both the dyes.
Additive-induced aggregate changes of two structurally similar dyes in aqueous solutions: A comparative photophysical study.

PubMed

Ghanadzadeh Gilani, A; Poormohammadi-Ahandani, Z; Kian, R

2018-01-15

Absorption and emission spectral characteristics of the two structurally similar phenothiazine dyes, azure B and toluidine blue, in aqueous solutions of the two sets of molecular additives (ureas and monosaccharides) were studied as a function of the dye and additive concentrations. The absorption spectra of the dyes were also studied in pure tetramethylurea with an aprotic nature. The spectral data were analyzed using DECOM Program. The dimer structure of the interacting molecules in these dyes was discussed using the exciton model. The urea class of additives was found to act as water structure-breakers over the range of studied concentration. The carbohydrate additives were found to act as water structure-breakers at low concentrations. However, the water structure breaking process may be disfavored by the additive-additive interactions at higher concentrations. It can be concluded that at low additive concentrations, the main driving force for breaking the dye association is water-additive interaction, which disrupts the water hydrogen bonds induced by the additives. However, at the high additive concentrations, the different phenomena including additive-additive and additive-dye interactions can change the structure, strength, and aggregative properties of the dyes. Finally, the urea in water induces noticeably fluorescence quenching in emission spectra of both the dyes. Copyright © 2017 Elsevier B.V. All rights reserved.
Anticonflict effect of alpidem as compared with the benzodiazepine alprazolam in rats.

PubMed

Hascoët, M; Bourin, M

1997-02-01

A comparative study between two drugs acting on the GABAA receptor, alprazolam and alpidem was undertaken, using simple tests such as measurement of spontaneous locomotor activity, four plates test and rotarod in mice. Additional conflict test was further performed using a new conflict paradigm where the opportunity existed for rats to choose during punished periods between immediate, punished reinforcement and delayed non-punished reinforcement. The benzodiazepine alprazolam, demonstrated, as expected, strong anxiolytic effects in mice and increased punished response in rats at non sedative doses (0.5, 1 mg/kg). High doses of alprazolam decreased spontaneous locomotor activity and induced myorelaxant effects in mice. Alpidem, an imidazopyridine derivative, induced motor impairment in mice and only very weak anxiolytic effects in the four plates test in mice (4 mg/kg) and in punished procedure in rats (32 mg/kg). As alprazolam is a full agonist for the GABAA receptor complex and alpidem is a partial agonist acting with specificity on omega 1 GABAA receptor subtypes, the results are discussed. Activity on omega 1 receptor subtypes is perhaps not sufficient in order to obtain a true anti-conflict effect and compounds such as alpidem only relieve some of the symptoms of anxiety disorders.
Role of practice-based research networks in comparative effectiveness research.

PubMed

Hartung, Daniel M; Guise, Jeanne-Marie; Fagnan, Lyle J; Davis, Melinda M; Stange, Kurt C

2012-01-01

Comparative effectiveness research fundamentally reorients how clinical evidence is generated and used with the goal of providing actionable information to decision-makers. To achieve this, it is vital that decision-makers and the research enterprise are engaged from research inception, to evidence generation and translation. Practice-based research networks are affiliated clinicians in diverse communities with the goal of conducting research to improve care. Practice-based research networks have the potential to advance all phases of the comparative effectiveness research cycle. The aim of this paper is to explore current and potential roles of practice-based research networks in conducting comparative effectiveness research.
Effect of galactooligosaccharide addition on the physical, optical, and sensory acceptance of vanilla ice cream.

PubMed

Balthazar, C F; Silva, H L A; Celeguini, R M S; Santos, R; Pastore, G M; Junior, C A Conte; Freitas, M Q; Nogueira, L C; Silva, M C; Cruz, A G

2015-07-01

The effect of the addition of galactooligosaccharide (GOS) on the physicochemical, optical, and sensory characteristics of ice cream was investigated. Vanilla ice cream was supplemented with 0, 1.5, and 3.0% (wt/wt) GOS and characterized for pH, firmness, color, melting, overrun, as well as subjected to a discriminative sensory test (triangle test). For comparison purposes, ice creams containing fructooligosaccharide were also manufactured. The GOS ice creams were characterized by increased firmness and lower melting rates. Different perceptions were reported in the sensory evaluation for the 3.0% GOS ice cream when compared with the control, which was not observed for the fructooligosaccharide ice cream. Overall, the findings suggest it is possible to produce GOS ice cream with improved stability in relation to the physicochemical parameters and sensory perception. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Effect of small proportion of butanol additive on the performance, emission, and combustion of Australian native first- and second-generation biodiesel in a diesel engine.

PubMed

Rahman, Md Mofijur; Rasul, Mohammad Golam; Hassan, Nur Md Sayeed; Azad, Abul Kalam; Uddin, Md Nasir

2017-10-01

This paper aims to investigate the effect of the addition of 5% alcohol (butanol) with biodiesel-diesel blends on the performance, emissions, and combustion of a naturally aspirated four stroke multi-cylinder diesel engine at different engine speeds (1200 to 2400 rpm) under full load conditions. Three types of local Australian biodiesel, namely macadamia biodiesel (MB), rice bran biodiesel (RB), and waste cooking oil biodiesel (WCB), were used for this study, and the data was compared with results for conventional diesel fuel (B0). Performance results showed that the addition of butanol with diesel-biodiesel blends slightly lowers the engine efficiency. The emission study revealed that the addition of butanol additive with diesel-biodiesel blends lowers the exhaust gas temperature (EGT), carbon monoxide (CO), nitrogen oxide (NOx), and particulate matter (PM) emissions whereas it increases hydrocarbon (HC) emissions compared to B0. The combustion results indicated that in-cylinder pressure (CP) for additive added fuel is higher (0.45-1.49%), while heat release rate (HRR) was lower (2.60-9.10%) than for B0. Also, additive added fuel lowers the ignition delay (ID) by 23-30% than for B0. Finally, it can be recommended that the addition of 5% butanol with Australian biodiesel-diesel blends can significantly lower the NOx and PM emissions.
Effect of combinations of additives on the performance of lithium ion batteries

NASA Astrophysics Data System (ADS)

Santee, Stuart; Xiao, Ang; Yang, Li; Gnanaraj, Joe; Lucht, Brett L.

Commercial lithium-ion batteries have excellent performance at room temperature for a few years. However, the calendar life and thermal stability (>50 °C) need to be improved for many applications, including electric vehicles. We have conducted an investigation of the effect of thermal stabilizing additives, including dimethyl acetamide, vinylene carbonate, and lithium bis(oxalato) borate, on the performance of lithium ion batteries stored at 70 °C for one month. The reactions of the lithium hexafluorophosphate/carbonate electrolyte, with and without electrolyte additives, with the surface of the electrodes after initial formation cycling have been analyzed via a combination of IR-ATR and XPS.
Effects of Fe2O3 addition on the nitridation of silicon powder

NASA Technical Reports Server (NTRS)

Hasegawa, Y.; Inomata, Y.; Kijima, K.; Matsuyama, T.

1977-01-01

The reaction of silicon powder and nitrogen was studied in the range of 1300-1400 C. When an addition of Fe2O3 was more than 0.8wt%, the reaction was linear and compared to samples with no Fe2O3, the reaction velocity increased 5 to 10 times. The reactions were mediated by the process of peeling and cracking in a thin layer of Si2N4 formed on the silicon particles or on the surface of the Fe-Si melts. As the addition of Fe2O3 increased, the reaction activation energy for highly pure samples decreased. Fe2O3 which exceeded the Si3N4 solubility limits was finally converted to d-Fe.
20 CFR 410.535 - Reductions; effect of an additional claim for benefits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Reductions; effect of an additional claim for benefits. 410.535 Section 410.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, TITLE IV-BLACK LUNG BENEFITS (1969- ) Payment of Benefits § 410.535...
20 CFR 410.535 - Reductions; effect of an additional claim for benefits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Reductions; effect of an additional claim for benefits. 410.535 Section 410.535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, TITLE IV-BLACK LUNG BENEFITS (1969- ) Payment of Benefits § 410.535...
Comparative Effectiveness and Implementation Research: Directions for Neurology

PubMed Central

Vickrey, Barbara G.; Hirtz, Deborah; Waddy, Salina; Cheng, Eric M.; Johnston, S. Claiborne

2013-01-01

There is an enormous unmet need for knowledge about how new insights from discovery and translational research can yield measurable, population-level improvements in health and reduction in mortality among those having or at risk for neurological disease. Once several, well-conducted randomized controlled trials establish the efficacy of a given therapy, implementation research can generate new knowledge about barriers to uptake of the therapy into widespread clinical care, and what strategies are effective in overcoming those barriers and in addressing health disparities. Comparative effectiveness research aims to elucidate the relative value (including clinical benefit, clinical harms, and/or costs) of alternative efficacious management approaches to a neurological disorder, generally through direct comparisons, and may include comparisons of methodologies for implementation. Congress has recently appropriated resources and established an institute to prioritize funding for such research. Neurologists and neuroscientists should understand the scope and objectives of comparative effectiveness and implementation research, their range of methodological approaches (formal literature syntheses, randomized trials, observational studies, modeling), and existing research resources (centers for literature synthesis, registries, practice networks) relevant to research for neurological conditions, in order to close the well-documented “evidence-to-practice gap.” Future directions include building this research resource capacity, producing scientists trained to conduct rigorous comparative effectiveness and implementation research, and embracing innovative strategies to set research priorities in these areas. PMID:22718542
Ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography.

PubMed

Pesek, Joseph J; Matyska, Maria T

2015-07-03

The use of ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography with silica hydride-based stationary phases and mass spectrometry detection is evaluated. Retention times, peak shape, efficiency and peak intensity are compared to the more standard additives formic acid and ammonium formate. The test solutes were NAD, 3-hydroxyglutaric acid, α-ketoglutaric acid, p-aminohippuric acid, AMP, ATP, aconitic acid, threonine, N-acetyl carnitine, and 3-methyladipic acid. The column parameters are assessed in both the positive and negative ion detection modes. Ammonium fluoride is potentially an aggressive mobile phase additive that could have detrimental effects on column lifetime. Column reproducibility is measured and the effects of switching between different additives are also tested. Copyright © 2015 Elsevier B.V. All rights reserved.
A comparative study of the effect of some nutritional medicinal plants effect on lead accumulation in the liver following different modes of administration

PubMed Central

Nwokocha, Chukwuemeka; Younger-Coleman, Novie; Nwokocha, Magdalene; Owu, Daniel; Iwuala, Moses

2014-01-01

Context and Objectives: Lead (Pb) toxicity leads to cell damage in many organs of the body. Using different treatment interventions and modes of administration we comparatively examined the protective ability of some medicinal plants on liver Pb accumulation. Materials and Methods: Rats were fed on either 7% w/w Zingiber officinale, 7% w/w Allium sativum, 10% w/w Lycopersicon esculentum, 5%, w/w Garcinia kola (all in rat chow), while Pb (100 ppm) was given in drinking water. The additives were administered together with (mode 1), a week after exposure to (mode 2) or a week before metal exposure to (mode 3) the metal for a period of 6 weeks. The metal accumulations in the liver were determined using atomic absorption spectrometry and compared using analysis of variance. Results: Some additives significantly (P < 0.05) reduced, while others enhanced Pb accumulation. Mode 2 yielded the highest mean % protection and mode 3 the lowest, no significant interaction between modes of administration and time of measurement in their relationships to percentage protection, but there was statistically significant (P < 0.05) interaction between modes of administration and additive used in their relationships to percentage protection. Conclusion: Protective effects of medicinal plants are varied and depend on the nature of lead exposure. PMID:25276068
Salmonella Enteritidis with double deletion in phoP fliC and a competitive exclusion culture elicit substantial additive protective effects against Salmonella exposure in newly hatched chicks.

PubMed

Methner, U; Berndt, A; Locke, M

2017-10-27

A live Salmonella Enteritidis vaccine (SE147N ΔphoP fliC), able to express both a homologous intestinal colonisation-inhibition effect and a systemic invasion-inhibition effect, was tested for its potential to generate a postulated additive protective effect in case of combined application with a competitive exclusion (CE) culture against Salmonella exposure in very young chicks. Both, SE147N ΔphoP fliC and the CE culture alone were highly protective against systemic and intestinal colonisation of the challenge strain in case of moderate Salmonella exposure, consequently, additive protective effects in combined use could not be detected. However, in case of high Salmonella Enteritidis challenge with 10 6 cfu/bird at day 3 of life the combination of the ΔphoP fliC vaccine and the CE culture resulted in a protective effect much more pronounced than either of the single preparations and most substantial compared to untreated control birds. The term additive protective effects reflects the recognition that exclusion effects by gut flora cultures and inhibition effects by Salmonella vaccines are caused by different mechanisms. Copyright © 2017 Elsevier Ltd. All rights reserved.
Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing

NASA Astrophysics Data System (ADS)

Farjam, Aslan; Cormier, Yannick; Dupuis, Philippe; Jodoin, Bertrand; Corbeil, Antoine

2015-10-01

In this work, aluminum and aluminum-alumina powder mixtures were used to produce pyramidal fin arrays on aluminum substrates using cold spray as an additive manufacturing process. Using aluminum-alumina mixtures instead of pure aluminum powder could be seen as a cost-effective measure, preventing nozzle clogging or the need to use expensive polymer nozzles that wear out rapidly during cold spray. The fin geometries that were produced were observed using a 3D digital microscope to determine the flow passages width and fins' geometric details. Heat transfer and pressure drop tests were carried out using different ranges of appropriate Reynolds numbers for the sought commercial application to compare each fin array and determine the effect of alumina content. It was found that the presence of alumina reduces the fins' performance when compared to pure aluminum fins but that they were still outperforming traditional fins. Numerical simulations were performed to model the fin arrays and were used to predict the pressure loss in the fin array and compare these results with experimental values. The numerical model opens up new avenues in predicting different applicable operating conditions and other possible fin shapes using the same fin composition, instead of performing costly and time-consuming experiments.

The Effect of (Ag, Ni, Zn)-Addition on the Thermoelectric Properties of Copper Aluminate

PubMed Central

Yanagiya, Shun-ichi; Van Nong, Ngo; Xu, Jianxiao; Pryds, Nini

2010-01-01

Polycrystalline bulk copper aluminate Cu1-x-yAgxByAlO2 with B = Ni or Zn were prepared by spark plasma sintering and subsequent thermal treatment. The influence of partial substitution of Ag, Ni and Zn for Cu-sites in CuAlO2 on the high temperature thermoelectric properties has been studied. The addition of Ag and Zn was found to enhance the formation of CuAlO2 phase and to increase the electrical conductivity. The addition of Ag or Ag and Ni on the other hand decreases the electrical conductivity. The highest power factor of 1.26 × 10-4 W/mK2 was obtained for the addition of Ag and Zn at 1,060 K, indicating a significant improvement compared with the non-doped CuAlO2 sample.
Solid-state supercapacitors with ionic liquid based gel polymer electrolyte: Effect of lithium salt addition

NASA Astrophysics Data System (ADS)

Pandey, G. P.; Hashmi, S. A.

2013-12-01

Performance characteristics of the solid-state supercapacitors fabricated with ionic liquid (IL) incorporated gel polymer electrolyte and acid treated multiwalled carbon nanotube (MWCNT) electrodes have been studied. The effect of Li-salt (LiPF6) addition in the IL (1-ethyl-3-methylimidazolium tris(pentafluoroethyl) trifluorophosphate, EMImFAP) based gel electrolyte on the performance of supercapacitors has been specifically investigated. The LiPF6/IL/poly(vinylidine fluoride-co-hexafluoropropylene) (PVdF-HFP) gel electrolyte film possesses excellent electrochemical window of 4 V (from -2.0 to 2.0 V), high ionic conductivity ∼2.6 × 10-3 S cm-1 at 20 °C and high enough thermal stability. The comparative performance of supercapacitors employing electrolytes with and without lithium salt has been evaluated by impedance spectroscopy and cyclic voltammetric studies. The acid-treated MWCNT electrodes show specific capacitance of ∼127 F g-1 with IL/LiPF6 containing gel polymer electrolyte as compared to that with the gel polymer electrolyte without Li-salt, showing the value of ∼76 F g-1. The long cycling stability of the solid state supercapacitor based on the Li-salt containing gel polymer electrolyte confirms the electrochemical stability of the electrolyte.
Effects of nitrogen and phosphorus additions on soil methane uptake in disturbed forests

NASA Astrophysics Data System (ADS)

Zheng, Mianhai; Zhang, Tao; Liu, Lei; Zhang, Wei; Lu, Xiankai; Mo, Jiangming

2016-12-01

Atmospheric nitrogen (N) deposition is generally thought to suppress soil methane (CH4) uptake in natural forests, and phosphorus (P) input may alleviate this negative effect. However, it remains unclear how N and P inputs control soil CH4 uptake in disturbed forests. In this study, soil CH4 uptake rates were measured in two disturbed forests, including a secondary forest (with previous, but not recent, disturbance) and a plantation forest (with recent continuous disturbance), in southern China for 34 months of N and/or P additions: control, N addition (150 kg N ha-1 yr-1), P addition (150 kg P ha-1 yr-1), and NP addition (150 kg N ha-1 yr-1 plus 150 kg P ha-1 yr-1). Mean CH4 uptake rate in control plots was significantly higher in the secondary forest (24.40 ± 0.81 µg CH4-C m-2 h-1) than in the plantation forest (17.07 ± 0.70 µg CH4-C m-2 h-1). CH4 uptake rate had negative relationships with soil water-filled pore space in both forests. In the secondary forest, N, P, and NP additions significantly decreased CH4 uptake by 39.7%, 27.8%, and 37.6%, respectively, but had no significant effects in the plantation forest, indicating that P input does not alleviate the suppression of CH4 uptake by N deposition. Taken together, our findings suggest that reducing anthropogenic disturbance, including harvesting of forest floor, and anthropogenic N and P inputs will increase soil CH4 uptake in disturbed forests, which is important in view of the increased trends in global warming during recent decades.
Feasibility of a multi-component additive for efficient control of activated sludge filamentous bulking.

PubMed

Seka, A M; Van De Wiele, T; Verstraete, W

2001-08-01

Instantaneous improvement of the settling of bulking filamentous activated sludge can be achieved by the addition of a polymer or a large amount (up to 100% of the MLSS concentration) of talc powder to the sludge. Long-term improvement relies on repeated additions, as these additives have no adverse effects on the causative filaments. A multi-component additive was compared to the traditional additives in lab-scale activated sludge units using three highly filamentous sludges from different industrial treatment plants. The study demonstrated that the multi-component additive was superior to the traditional remedies. It was shown that, in the case of severe filamentous bulking, a single addition of the new additive immediately improved sludge settling and exerted a destructive effect on the causative filamentous bacteria. Thus, the latter additive also ensured a long-term sludge sedimentation improvement. The traditional additives exhibited an immediate and short-term effect. The novel additive also retarded sludge rising due to denitrification and it improved sludge dewaterability. The study revealed Nostocoido limicola II, with slightly hydrophobic cell wall, to be somewhat resistant to the quaternary ammonium salt present as biocide in the additive.
Effect of barium titanate (BaTiO{sub 3}) additive on the short-term DC breakdown strength of polyethylene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, M.S.; Henk, P.O.

1996-12-31

The use of additives to insulating materials is one of the methods to improve certain properties of these materials. Additives can also be used to provide more insight into some processes like conduction, space charge formation and breakdown under certain conditions of field application. In the present paper, the effect of the addition of fine particles 1 wt% BaTiO{sub 3} to plain low density polyethylene (LDPE) on the short-term dc breakdown strength of LDPE at room temperature was investigated. The characteristics of the used polyethylene are as follows: density 0.925 g/cm{sup 3}, melt index 0.25 g/10 min. The BaTiO{sub 3}more » used was laboratory grade with particle size less than 7 {micro}m. Special cylindrical test samples of both undoped and doped materials were used in this investigation. Stainless steel hemispherically tipped electrodes were embedded in the material by molding. The mean value of the gap length between the electrodes was 0.25 mm. The design of the test sample allows for determining the intrinsic breakdown strength of the material. The Weibull plots were used to analyze the breakdown test results. Analysis of the results indicate that the addition of BaTiO{sub 3} to LDPE has reduced the short term dc breakdown strength of the doped material by about 16% if compared with the corresponding value for the plain LDPE. An attempt is made to correlate between the present results, and earlier published results about the effect of BaTiO{sub 3} on dc conductivity and space charge formation in LDPE.« less
The comparative effectiveness and cost-effectiveness of ranibizumab for neovascular macular degeneration revisited.

PubMed

Brown, Gary C; Brown, Melissa M; Lieske, Heidi B; Turpcu, Adam; Rajput, Yamina

2017-01-01

To compare a near decade of follow-up, newer control cohort data, use of both the societal and third party insurer cost perspectives, and integration of unilateral/bilateral therapy on the comparative effectiveness and cost-effectiveness of intravitreal ranibizumab therapy for neovascular, age-related macular degeneration (AMD). Value-Based Medicine ® , 12-year, combined-eye model, cost-utility analysis employing MARINA and HORIZON clinical trial data. Preference-based comparative effectiveness outcomes were quantified in (1) QALY (quality-adjusted life-year) gain, and (2) percent improvement in quality-of-life, while cost-effectiveness outcomes were quantified in (3) the cost-utility ratio (CUR) and financial return-on-investment (ROI) to society. Using MARINA and HORIZON trial data and a meta-analysis control cohort after 24 months, ranibizumab therapy conferred a combined-eye patient value (quality-of-life) gain of 16.3%, versus 10.4% found in 2006. The two-year direct ophthalmic medical cost for ranibizumab therapy was $46,450, a 33.8% real dollar decrease from 2006. The societal cost perspective CUR was -$242,920/QALY, indicating a $282,517 financial return-on-investment (ROI), or 12.3%/year to society for direct ophthalmic medical costs expended. The 3rd party insurer CUR ranged from $21,199/QALY utilizing all direct, medical costs, to $69,591/QALY using direct ophthalmic medical costs. Ranibizumab therapy for neovascular AMD in 2015, considering treatment of both eyes, conferred greater patient value gain (comparative effectiveness) and improved cost-effectiveness than in 2006, as well as a large monetary return-on-investment to the Gross Domestic Product and nation's wealth. The model herein integrates important novel features for neovascular age-related macular degeneration, vitreoretinal cost effectiveness analyses, including: (1) treatment of both eyes, (2) a long-term, untreated control cohort, and (3) the use of societal costs.
Effect of additional human chorionic gonadotrophin (hCG) on follicular growth and ovulation in gonadotrophin-treated gilts

PubMed Central

Manjarín, Rodrigo; Cassar, Glen; Friendship, Robert M.; Garcia, José C.; Dominguez, J. Carlos; Kirkwood, Roy N.

2015-01-01

The objective of this study was to determine the effect of additional human chorionic gonadotrophin (hCG) on the ovarian response of gilts previously treated with 200 IU hCG combined with 400 IU equine chorionic gonadotrophin (eCG) (eCG/hCG). Seventy-one prepuberal gilts (105 ± 7.5 kg) were assigned to groups: i) eCG/hCG (hCG-0; n = 25); ii) eCG/hCG followed by 100 IU of hCG at 24 h (hCG-100; n = 24); iii) eCG/hCG followed by 200 IU hCG at 24 h (hCG-200; n = 10); and iv) controls (CON; n = 12). Ovulation response was assessed by ovarian dissection or real-time ultrasonography. Additional hCG did not significantly improve numbers of gilts ovulating. Numbers of corpora lutea increased with hCG, and was higher in hCG-200 (P < 0.01). Compared to hCG-0, the frequency of cysts in gilts was higher in hCG-100 (P < 0.05) and further increased in hCG-200 (P < 0.01). The number of cysts per gilt was dose-dependently increased by additional hCG. We conclude that supplemental hCG will increase the number of corpora lutea but will be associated with follicular cyst development in a dose dependent manner. PMID:26130853
Role of practice-based research networks in comparative effectiveness research

PubMed Central

Hartung, Daniel M; Guise, Jeanne-Marie; Fagnan, Lyle J; Davis, Melinda M; Stange, Kurt C

2012-01-01

Comparative effectiveness research fundamentally reorients how clinical evidence is generated and used with the goal of providing actionable information to decision-makers. To achieve this, it is vital that decision-makers and the research enterprise are engaged from research inception, to evidence generation and translation. Practice-based research networks are affiliated clinicians in diverse communities with the goal of conducting research to improve care. Practice-based research networks have the potential to advance all phases of the comparative effectiveness research cycle. The aim of this paper is to explore current and potential roles of practice-based research networks in conducting comparative effectiveness research. PMID:23105964
Parental Anxiety and Child Symptomatology: An Examination of Additive and Interactive Effects of Parent Psychopathology

ERIC Educational Resources Information Center

Burstein, Marcy; Ginsburg, Golda S.; Tein, Jenn-Yun

2010-01-01

The current study examined relations between parent anxiety and child anxiety, depression, and externalizing symptoms. In addition, the study tested the additive and interactive effects of parent anxiety with parent depression and externalizing symptoms in relation to child symptoms. Forty-eight parents with anxiety disorders and 49 parents…
The Additional Costs per Month of Progression-Free Survival and Overall Survival: An Economic Model Comparing Everolimus with Cabozantinib, Nivolumab, and Axitinib for Second-Line Treatment of Metastatic Renal Cell Carcinoma.

PubMed

Swallow, Elyse; Messali, Andrew; Ghate, Sameer; McDonald, Evangeline; Duchesneau, Emilie; Perez, Jose Ricardo

2018-04-01

year were $34,141, $19,371, and $17,506 higher, respectively. Everolimus had similar OS and lower costs compared with axitinib. The additional cost per month of OS was $48,773 for cabozantinib and $24,214 for nivolumab versus everolimus. The additional treatment cost with cabozantinib, nivolumab, or axitinib versus everolimus for each additional month of PFS was estimated at $21,338, $64,570, and $35,012, respectively. Over 2 years, the additional costs per additional month of OS for nivolumab and axitinib versus everolimus were similar to the 1-year analysis; for cabozantinib, the cost was lower. Results were sensitive to changes in mean OS, mean PFS, therapy duration, and drug costs estimates. Everolimus for second-line mRCC was associated with similar OS and lower costs compared with axitinib over 1- and 2-year horizons. The additional cost per additional month of OS and PFS associated with cabozantinib or nivolumab versus everolimus creates a metric for evaluating the cost of second-line therapies in relation to their respective treatment effects. Funding for this research was provided by Novartis, which was involved in all stages of study research and manuscript preparation. Ghate and Perez are employees of Novartis and own stock/stock options. Swallow, Messali, McDonald, and Duchesneau are employees of Analysis Group, which has received consultancy fees from Novartis. Study concept and design were contributed by Swallow, Messali, Ghate, and Perez, along with McDonald and Duchesneau. Swallow, Messali, McDonald, and Duchesneau collected the data, and all authors participated in data interpretation. The manuscript was written by Swallow, Messali, and Ghate, along with the other authors, and revised by Swallow, Messali, Ghate, and Perez. A synopsis of the current research was presented in poster format at the 15th International Kidney Cancer Symposium on November 4-5, 2016, in Miami, Florida.
The additive effects of minoxidil and retinol on human hair growth in vitro.

PubMed

Yoo, Hyeon Gyeong; Chang, In-Young; Pyo, Hyun Keol; Kang, Yong Jung; Lee, Seung Ho; Kwon, Oh Sang; Cho, Kwang Hyun; Eun, Hee Chul; Kim, Kyu Han

2007-01-01

Minoxidil enhances hair growth by prolonging the anagen phase and induces new hair growth in androgenetic alopecia (AGA), whereas retinol significantly improves scalp skin condition and promotes hair growth. We investigated the combined effects of minoxidil and retinol on human hair growth in vitro and on cultured human dermal papilla cells (DPCs) and epidermal keratinocytes (HaCaT). The combination of minoxidil and retinol additively promoted hair growth in hair follicle organ cultures. In addition, minoxidil plus retinol more effectively elevated phosphorylated Erk, phosphorylated Akt levels, and the Bcl-2/Bax ratio than minoxidil alone in DPCs and HaCaT. We found that the significant hair shaft elongation demonstrated after minoxidil plus retinol treatment would depend on the dual kinetics associated with the activations of Erk- and Akt-dependent pathways and the prevention of apoptosis by increasing the Bcl-2/Bax ratio.
Effect of Micronutrient Powder Addition on Sensory Properties of Foods for Older Adults.

PubMed

Field, Katherine M; Duncan, Alison M; Keller, Heather H; Stark, Ken D; Duizer, Lisa M

2017-10-01

Micronutrient fortification can improve nutrient intake of older adults in long-term care. However, previous studies indicate that micronutrient fortification can alter food sensory attributes and, potentially, consumer liking. Others have found no effect of fortification on liking. This research investigates the effect of micronutrient powder addition on the sensory properties of selected foods commonly served in long-term care. A micronutrient powder containing 9 vitamins and 3 minerals was added to tomato soup and oatmeal at different levels. Using projective mapping, changes in sensory properties were observed with powder addition. Descriptive analysis, used to quantify these changes, showed that both the tomato soup and oatmeal had reduced flavor as the amount of added micronutrient powder increased. Oatmeal also showed changes in texture with fortification. Consumer liking scores for tomato soup showed that micronutrient addition affected liking when 100% of a daily dose was added into the soup. Addition of 50% of the daily dose did not affect liking. Oatmeal liking did not differ between fortified and unfortified samples. Results from this research can be used to decide whether a micronutrient powder of selected vitamins and minerals can be added to foods served to older adults in long-term care. Although sensory properties of the foods will be altered, fortification of both tomato soup and oatmeal with the developed powder is possible without reducing consumer liking to the point where it is disliked. © 2017 Institute of Food Technologists®.
Predicting the effects of nanoscale cerium additives in diesel fuel on regional-scale air quality.

PubMed

Erdakos, Garnet B; Bhave, Prakash V; Pouliot, George A; Simon, Heather; Mathur, Rohit

2014-11-04

Diesel vehicles are a major source of air pollutant emissions. Fuel additives containing nanoparticulate cerium (nCe) are currently being used in some diesel vehicles to improve fuel efficiency. These fuel additives also reduce fine particulate matter (PM2.5) emissions and alter the emissions of carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbon (HC) species, including several hazardous air pollutants (HAPs). To predict their net effect on regional air quality, we review the emissions literature and develop a multipollutant inventory for a hypothetical scenario in which nCe additives are used in all on-road and nonroad diesel vehicles. We apply the Community Multiscale Air Quality (CMAQ) model to a domain covering the eastern U.S. for a summer and a winter period. Model calculations suggest modest decreases of average PM2.5 concentrations and relatively larger decreases in particulate elemental carbon. The nCe additives also have an effect on 8 h maximum ozone in summer. Variable effects on HAPs are predicted. The total U.S. emissions of fine-particulate cerium are estimated to increase 25-fold and result in elevated levels of airborne cerium (up to 22 ng/m3), which might adversely impact human health and the environment.
Effects of acupuncture and placebo TENS in addition to exercise in treatment of rotator cuff tendinitis.

PubMed

Razavi, Mahnaz; Jansen, Gunilla Brodda

2004-12-01

To compare the effect of acupuncture with placebo transcutaneous electrical nerve stimulation (TENS) when added to the exercise treatment of rotator cuff tendinitis with respect to pain, shoulder movements and function. Prospective alternate allocation controlled trial. Outpatient department. Thirty-three patients (12 women and 21 men) were included in the study. All had clinically diagnosed rotator cuff tendinitis. Both groups underwent a standardized training programme. Each patient received in addition either 10 treatments with acupuncture or placebo TENS, 1-2 times per week. The parameters investigated were intensity of pain (measured with visual analogue scale), active, passive as well as functional movements in the shoulder (hand in neck (HIN) and pour out of a pot (POP)). Patients were tested before treatment, after treatment and at a six-month follow-up. Medicine intake, ability to lie on the affected side and sleep disturbances were evaluated. A subjective assessment was made after the treatment and at follow-up. Sixteen patients had acupuncture, 17 placebo TENS. Eight patients endured pain at rest in the placebo TENS group, and 10 in the acupuncture group. After treatment both groups improved, the improvement persisted at the six-month follow-up. Both groups increased range of movement. Except for the functional test HIN in the acupuncture group, there were no differences between the groups regarding other parameters investigated directly after treatment or at six-month follow-up. There is no difference between the effect of additional acupuncture treatment and placebo TENS in the treatment of rotator cuff tendinitis.
Comparative effectiveness research in cancer with observational data.

PubMed

Giordano, Sharon H

2015-01-01

Observational studies are increasingly being used for comparative effectiveness research. These studies can have the greatest impact when randomized trials are not feasible or when randomized studies have not included the population or outcomes of interest. However, careful attention must be paid to study design to minimize the likelihood of selection biases. Analytic techniques, such as multivariable regression modeling, propensity score analysis, and instrumental variable analysis, also can also be used to help address confounding. Oncology has many existing large and clinically rich observational databases that can be used for comparative effectiveness research. With careful study design, observational studies can produce valid results to assess the benefits and harms of a treatment or intervention in representative real-world populations.
Chemistry of Food Additives: Direct and Indirect Effects.

ERIC Educational Resources Information Center

Pauli, George H.

1984-01-01

The primary component(s), impurities, and degradation products of polysorbate 80, nitrate and nitrite salts, and diethylpyrocarbonate (DEPC) are discussed. Safety considerations related to these food additives are also noted. The chick-edema factor which results from an additive in poultry feed is also discussed. (JN)
Synergistic and Additive Effect of Oregano Essential Oil and Biological Silver Nanoparticles against Multidrug-Resistant Bacterial Strains

PubMed Central

Scandorieiro, Sara; de Camargo, Larissa C.; Lancheros, Cesar A. C.; Yamada-Ogatta, Sueli F.; Nakamura, Celso V.; de Oliveira, Admilton G.; Andrade, Célia G. T. J.; Duran, Nelson; Nakazato, Gerson; Kobayashi, Renata K. T.

2016-01-01

Bacterial resistance to conventional antibiotics has become a clinical and public health problem, making therapeutic decisions more challenging. Plant compounds and nanodrugs have been proposed as potential antimicrobial alternatives. Studies have shown that oregano (Origanum vulgare) essential oil (OEO) and silver nanoparticles have potent antibacterial activity, also against multidrug-resistant strains; however, the strong organoleptic characteristics of OEO and the development of resistance to these metal nanoparticles can limit their use. This study evaluated the antibacterial effect of a two-drug combination of biologically synthesized silver nanoparticles (bio-AgNP), produced by Fusarium oxysporum, and OEO against Gram-positive and Gram-negative bacteria, including multidrug-resistant strains. OEO and bio-AgNP showed bactericidal effects against all 17 strains tested, with minimal inhibitory concentrations (MIC) ranging from 0.298 to 1.193 mg/mL and 62.5 to 250 μM, respectively. Time-kill curves indicated that OEO acted rapidly (within 10 min), while the metallic nanoparticles took 4 h to kill Gram-negative bacteria and 24 h to kill Gram-positive bacteria. The combination of the two compounds resulted in a synergistic or additive effect, reducing their MIC values and reducing the time of action compared to bio-AgNP used alone, i.e., 20 min for Gram-negative bacteria and 7 h for Gram-positive bacteria. Scanning electron microscopy (SEM) revealed similar morphological alterations in Staphylococcus aureus (non-methicillin-resistant S. aureus, non-MRSA) cells exposed to three different treatments (OEO, bio-AgNP and combination of the two), which appeared cell surface blebbing. Individual and combined treatments showed reduction in cell density and decrease in exopolysaccharide matrix compared to untreated bacterial cells. It indicated that this composition have an antimicrobial activity against S. aureus by disrupting cells. Both compounds showed very low
Synergistic and Additive Effect of Oregano Essential Oil and Biological Silver Nanoparticles against Multidrug-Resistant Bacterial Strains.

PubMed

Scandorieiro, Sara; de Camargo, Larissa C; Lancheros, Cesar A C; Yamada-Ogatta, Sueli F; Nakamura, Celso V; de Oliveira, Admilton G; Andrade, Célia G T J; Duran, Nelson; Nakazato, Gerson; Kobayashi, Renata K T

2016-01-01

Bacterial resistance to conventional antibiotics has become a clinical and public health problem, making therapeutic decisions more challenging. Plant compounds and nanodrugs have been proposed as potential antimicrobial alternatives. Studies have shown that oregano (Origanum vulgare) essential oil (OEO) and silver nanoparticles have potent antibacterial activity, also against multidrug-resistant strains; however, the strong organoleptic characteristics of OEO and the development of resistance to these metal nanoparticles can limit their use. This study evaluated the antibacterial effect of a two-drug combination of biologically synthesized silver nanoparticles (bio-AgNP), produced by Fusarium oxysporum, and OEO against Gram-positive and Gram-negative bacteria, including multidrug-resistant strains. OEO and bio-AgNP showed bactericidal effects against all 17 strains tested, with minimal inhibitory concentrations (MIC) ranging from 0.298 to 1.193 mg/mL and 62.5 to 250 μM, respectively. Time-kill curves indicated that OEO acted rapidly (within 10 min), while the metallic nanoparticles took 4 h to kill Gram-negative bacteria and 24 h to kill Gram-positive bacteria. The combination of the two compounds resulted in a synergistic or additive effect, reducing their MIC values and reducing the time of action compared to bio-AgNP used alone, i.e., 20 min for Gram-negative bacteria and 7 h for Gram-positive bacteria. Scanning electron microscopy (SEM) revealed similar morphological alterations in Staphylococcus aureus (non-methicillin-resistant S. aureus, non-MRSA) cells exposed to three different treatments (OEO, bio-AgNP and combination of the two), which appeared cell surface blebbing. Individual and combined treatments showed reduction in cell density and decrease in exopolysaccharide matrix compared to untreated bacterial cells. It indicated that this composition have an antimicrobial activity against S. aureus by disrupting cells. Both compounds showed very low
Thermal processing of EVA encapsulants and effects of formulation additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pern, F.J.; Glick, S.H.

1996-09-01

The authors investigated the in-situ processing temperatures and effects of various formulation additives on the formation of ultraviolet (UV) excitable chromophores in the thermal lamination and curing of ethylene-vinyl acetate (EVA) encapsulants. A programmable, microprocessor-controlled, double-bag vacuum laminator was used to study two commercial as-formulated EVA films. A9918P and 15295P, and solution-cast films of Elvax{trademark} (EVX) impregnated with various curing agents and antioxidants. The results show that the actual measured temperatures of EVA lagged significantly behind the programmed profiles for the heating elements and were affected by the total thermal mass loaded inside the laminator chamber. The antioxidant Naugard P{trademark},more » used in the two commercial EVA formulations, greatly enhances the formation of UV-excitable, short chromophores upon curing, whereas other tested antioxidants show little effect. A new curing agent chosen specifically for the EVA formulation modification produces little or no effect on chromophore formation, no bubbling problems in the glass/EVX/glass laminates, and a gel content of {approximately}80% when cured at programmed 155 C for 4 min. Also demonstrated is the greater discoloring effect with higher concentrations of curing-generated chromophores.« less
Effect of the addition of mixture of plant components on the mechanical properties of wheat bread

NASA Astrophysics Data System (ADS)

Wójcik, Monika; Dziki, Dariusz; Biernacka, Beata; Różyło, Renata; Miś, Antoni; Hassoon, Waleed H.

2017-10-01

Instrumental methods of measuring the mechanical properties of bread can be used to determine changes in the properties of it during storage, as well as to determine the effect of various additives on the bread texture. The aim of this study was to investigate the effect of the mixture of plant components on the physical properties of wheat bread. In particular, the mechanical properties of the crumb and crust were studied. A sensory evaluation of the end product was also performed. The mixture of plant components included: carob fiber, milled grain red quinoa and black oat (1:2:2) - added at 0, 5, 10, 15, 20, 25 % - into wheat flour. The results showed that the increase of the addition of the proposed additive significantly increased the water absorption of flour mixtures. Moreover, the use of the mixture of plant components above 5% resulted in the increase of bread volume and decrease of crumb density. Furthermore, the addition of the mixture of plant components significantly affected the mechanical properties of bread crumb. The hardness of crumb also decreased as a result of the mixture of plant components addition. The highest cohesiveness was obtained for bread with 10% of additive and the lowest for bread with 25% of mixture of plant components. Most importantly, the enrichment of wheat flour with the mixture of plant components significantly reduced the crust failure force and crust failure work. The results of sensory evaluation showed that the addition of the mixture of plant components of up to 10% had little effect on bread quality.

Comparative study of fentanyl and morphine in addition to hyperbaric or isobaric bupivacaine in combined spinal anaesthesia for caesarean section

PubMed Central

Saracoglu, Ayten; Saracoglu, Kemal T.; Eti, Zeynep

2011-01-01

Introduction The aim of our study was to compare the effects of isobaric and hyperbaric bupivacaine combined with morphine or fentanyl in patients undergoing caesarean section. We assessed quality and spread of analgesia and anaesthesia, postoperative analgesic requirement and side effects. Material and methods Hundred patients with American Society of Anesthesiologists physical status (ASA) I-II, age 18 to 40 years, were randomized to 4 groups. The intrathecal solutions were isobaric bupivacaine + morphine (group A), isobaric bupivacaine + fentanyl (group B), heavy bupivacaine + + morphine (group C) and heavy bupivacaine + fentanyl (group D). Mean arterial pressure, heart rate, oxygen saturation, ephedrine consumption, analgesic requirement time and additional analgesic needs were recorded. Results The 1st min value of mean arterial pressure was the lowest one in all groups. Heart rate decreased significantly in group A at the 10th min but not in the other groups. The decrease of visual analogue scale (VAS) pain scores began in the groups after the 4th postoperative h (p < 0.05) and the VAS value of group B at the 8th h was significantly higher than the other groups. The first analgesic requirement time in the postoperative period was longer in patients who had intrathecal morphine than those who had fentanyl. The duration of analgesia with isobaric bupivacaine and morphine was the longest one. Conclusions We concluded that intrathecal morphine provides a long duration of postoperative analgesia but the duration gets longer when it is combined with plain bupivacaine instead of heavy bupivacaine. PMID:22291807
Lubricant and additive effects on spur gear fatigue life

NASA Technical Reports Server (NTRS)

Townsend, D. P.; Zaretsky, E. V.; Scibbe, H. W.

1985-01-01

Spur gear endurance tests were conducted with six lubricants using a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 spur gears. The sixth lubricant was divided into four batches each of which had a different additive content. Lubricants tested with a phosphorus-type load carrying additive showed a statistically significant improvement in life over lubricants without this type of additive. The presence of sulfur type antiwear additives in the lubricant did not appear to affect the surface fatigue life of the gears. No statistical difference in life was produced with those lubricants of different base stocks but with similar viscosity, pressure-viscosity coefficients and antiwear additives. Gears tested with a 0.1 wt % sulfur and 0.1 wt % phosphorus EP additives in the lubricant had reactive films that were 200 to 400 (0.8 to 1.6 microns) thick.
The effect of lactic acid bacterial starter culture and chemical additives on wilted rice straw silage.

PubMed

Wang, Yan-Su; Shi, Wei; Huang, Lin-Ting; Ding, Cheng-Long; Dai, Chuan-Chao

2016-04-01

Lactic acid bacteria (LAB) are suitable for rice straw silage fermentation, but have been studied rarely, and rice straw as raw material for ensiling is difficult because of its disadvantages, such as low nutrition for microbial activities and low abundances of natural populations of LAB. So we investigated the effect of application of LAB and chemical additives on the fermentation quality and microbial community of wilted rice straw silage. Treatment with chemical additives increased the concentrations of crude protein (CP), water soluble carbohydrate (WSC), acetic acid and lactic acid, reduced the concentrations of acid detergent fiber (ADF) and neutral detergent fiber (NDF), but did not effectively inhibit the growth of spoilage organisms. Inoculation with LABs did not improve the nutritional value of the silage because of poor growth of LABs in wilted rice straw. Inoculation with LAB and addition of chemical materials improved the quality of silage similar to the effects of addition of chemical materials alone. Growth of aerobic and facultatively anaerobic bacteria was inhibited by this mixed treatment and the LAB gradually dominated the microbial community. In summary, the fermentation quality of wilted rice straw silage had improved by addition of LAB and chemical materials. © 2015 Japanese Society of Animal Science.
Instrumental variable methods in comparative safety and effectiveness research.

PubMed

Brookhart, M Alan; Rassen, Jeremy A; Schneeweiss, Sebastian

2010-06-01

Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial.
Instrumental variable methods in comparative safety and effectiveness research†

PubMed Central

Brookhart, M. Alan; Rassen, Jeremy A.; Schneeweiss, Sebastian

2010-01-01

Summary Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial. PMID:20354968
Effect of amendments addition on adsorption of landfill leachate

NASA Astrophysics Data System (ADS)

Bai, X. J.; Zhang, H. Y.; Wang, G. Q.; Gu, J.; Wang, J. H.; Duan, G. P.

2018-03-01

The disposal of leachate has become one of the most pressing problems for landfills. This study taking three kinds of amendments, corn straw, mushroom residue and garden waste as adsorbent materials, evaluates the different amendments on the leachate adsorption effect through analyzing indicators as the saturation adsorption ratio, sulfur containing odor emission, heat value. The results showed that all three kinds of amendments can effectively adsorb leachate, with saturation adsorption ratio between 1: 2 and 1: 4. Adding amendment could significantly reduce the sulfur containing odor emission of leachate. Compared the three kinds of amendments, mushroom residue could adsorb leachate at a maximize degree with a low concentration of sulfur containing odor emission. The industrial analysis showed that the heat values of the amendments after absorbing leachate are more than 14MJ/kg, and it can be utilized as a biomass fuel.
Effect of hydrophobic additive on oxygen transport in catalyst layer of proton exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Wang, Shunzhong; Li, Xiaohui; Wan, Zhaohui; Chen, Yanan; Tan, Jinting; Pan, Mu

2018-03-01

Oxygen transport resistance (OTR) is a critical factor influencing the performance of proton exchange membrane fuel cells (PEMFCs). In this paper, an effective method to reduce the OTR of catalyst layers (CLs) by introducing a hydrophobic additive into traditional CLs is proposed. A low-molecular-weight polytetrafluoroethylene (PTFE) is selected for its feasibility to prepare an emulsion, which is mixed with a traditional catalyst ink to successfully fabricate the CL with PTFE of 10 wt%. The PTFE film exists in the mesopores between the carbon particles. The limiting current of the hydrophobic CL was almost 4000 mA/cm2, which is 500 mA/cm2 higher than that of the traditional CL. PTFE reduces the OTR of the CL in the dry region by as much as 24 s/m compared to the traditional CL and expands the dry region from 2000 mA/cm2 in the traditional CL to 2500 mA/cm2. Furthermore, the CL with the hydrophobic agent can improve the oxygen transport in the wet region (>2000 mA/cm2) more effectively than that in the dry region. All these results indicate that the CL with the hydrophobic agent shows a superior performance in terms of optimizing water management and effectively reduces the OTR in PEMFCs.
A comparative study of functional properties of normal and wooden breast broiler chicken meat with NaCl addition.

PubMed

Xing, Tong; Zhao, Xue; Han, Minyi; Cai, Linlin; Deng, Shaolin; Zhou, Guanghong; Xu, Xinglian

2017-09-01

The selection of broilers for augmented growth rate and breast has brought about wooden-breast (WB) muscle abnormalities, which caused substantial economic losses. The objective of this study was to compare water holding capacity, water mobility and distribution, salt-soluble protein (SSP) content, and protein profiles of normal and WB chicken meat with different additions of NaCl. Thirty WB and 30 normal chicken breasts were selected from a deboning line of a major Chinese processing plant at 2 to 3 h post mortem. Two different meat batters were formulated to 150 mg/g meat protein and different NaCl contents (0%, 1%, 2%, 3%, and 4%). Results indicated that as NaCl contents increased, the cooking loss of meat batters decreased (P < 0.05). Increasing the NaCl content to 3% or more increased the solubility of myofibrillar protein and the extraction of SSPs, which resulted in the improving of cooking yield. Over a range of salt concentrations, normal and WB meat showed different protein profiles, with myosin heavy chain exhibiting a higher intensity at ≥3% salt level. Low-field nuclear magnetic resonance (LF-NMR)revealed an increased T22 and higher P22 in raw WB meat compared to normal meat (P < 0.05). Regarding the meat batters, WB meat batters had reduced T21 and lower immobilized water proportions at low NaCl contents (<2%). After heating, T2 shifted towards higher relaxation times with increasing NaCl contents in meat gels. Meat gels prepared from WB had a lower proportion of water within the myofibrillar protein matrix and a greater proportion of exuded bulk water at NaCl contents <3% (P < 0.05), while at higher NaCl contents the difference was eliminated, thus improving water retention capacity. In conclusion, for raw meat, meat batters and gels, water distribution and mobility of WB exhibited significant differences compared to normal meat. The addition of NaCl affected water mobility and distributions in meat batters, with a level of 3% NaCl eliminating the
The effect of leachate recirculation with enzyme cellulase addition on waste stability in landfill bioreactor

NASA Astrophysics Data System (ADS)

Saffira, N.; Kristanto, G. A.

2018-01-01

Landfill bioreactor with leachate recirculation is known to enhance waste stabilization. However, the composition of waste in Indonesia is comprised by organic waste which is lignocellulosic materials that considered take a long time to degrade under anaerobic condition. To accelerate the degradation process, enzyme addition is ought to do. Cellulase is an enzyme that can catalyse cellulose and other polysaccharide decomposition processes. Therefore, operation of waste degradation using leachate recirculation with a cellulase addition to enhance waste stabilization was investigated using anaerobic bioreactor landfill. The experiment was performed on 2 conditions; leachate recirculation with cellulase addition and recirculation only as a control. The addition of cellulase is reported to be significant in decreasing organic content, represented by volatile solid parameter. The volatile solid reduction in the cellulase augmented reactor and control reactor was 17.86% and 7.90%, respectively. Cellulase addition also resulted in the highest cellulose reduction. Settlement of the landfill in a bioreactor with enzyme addition (32.67%) was reported to be higher than the control (19.33%). Stabilization of landfill review by the decreasing rate constant of the cellulose and lignin ratio parameter was more rapidly achieved by the enzyme addition (0.014 day-1) compared to control (0.002 day-1).
Addition of docetaxel and/or zoledronic acid to standard of care for hormone-naive prostate cancer: a cost-effectiveness analysis.

PubMed

Zhang, Pengfei; Wen, Feng; Fu, Ping; Yang, Yu; Li, Qiu

2017-07-31

The effectiveness of the addition of docetaxel and/or zoledronic acid to the standard of care (SOC) for hormone-naive prostate cancer has been evaluated in the STAMPEDE trial. The object of the present analysis was to evaluate the cost-effectiveness of these treatment options in the treatment of advanced hormone-naive prostate cancer in China. A cost-effectiveness analysis using a Markov model was carried out from the Chinese societal perspective. The efficacy data were obtained from the STAMPEDE trial and health utilities were derived from previous studies. Transition probabilities were calculated based on the survival in each group. The primary endpoint in the analysis was the incremental cost-effectiveness ratio (ICER), and model uncertainties were explored by 1-way sensitivity analysis and probabilistic sensitivity analysis. SOC alone generated an effectiveness of 2.65 quality-adjusted life years (QALYs) at a lifetime cost of $20,969.23. At a cost of $25,001.34, SOC plus zoledronic acid was associated with 2.69 QALYs, resulting in an ICER of $100,802.75/QALY compared with SOC alone. SOC plus docetaxel gained an effectiveness of 2.85 QALYs at a cost of $28,764.66, while the effectiveness and cost data in the SOC plus zoledronic acid/docetaxel group were 2.78 QALYs and $32,640.95. Based on the results of the analysis, SOC plus zoledronic acid, SOC plus docetaxel, and SOC plus zoledronic acid/docetaxel are unlikely to be cost-effective options in patients with advanced hormone-naive prostate cancer compared with SOC alone.
Comparative Effectiveness of Cancer Control and Survival after Robot-Assisted versus Open Radical Prostatectomy.

PubMed

Hu, Jim C; O'Malley, Padraic; Chughtai, Bilal; Isaacs, Abby; Mao, Jialin; Wright, Jason D; Hershman, Dawn; Sedrakyan, Art

2017-01-01

Robot-assisted surgery has been rapidly adopted in the U.S. for prostate cancer. Its adoption has been driven by market forces and patient preference, and debate continues regarding whether it offers improved outcomes to justify the higher cost relative to open surgery. We examined the comparative effectiveness of robot-assisted vs open radical prostatectomy in cancer control and survival in a nationally representative population. This population based observational cohort study of patients with prostate cancer undergoing robot-assisted radical prostatectomy and open radical prostatectomy during 2003 to 2012 used data captured in the SEER (Surveillance, Epidemiology, and End Results)-Medicare linked database. Propensity score matching and time to event analysis were used to compare all cause mortality, prostate cancer specific mortality and use of additional treatment after surgery. A total of 6,430 robot-assisted radical prostatectomies and 9,161 open radical prostatectomies performed during 2003 to 2012 were identified. The use of robot-assisted radical prostatectomy increased from 13.6% in 2003 to 2004 to 72.6% in 2011 to 2012. After a median followup of 6.5 years (IQR 5.2-7.9) robot-assisted radical prostatectomy was associated with an equivalent risk of all cause mortality (HR 0.85, 0.72-1.01) and similar cancer specific mortality (HR 0.85, 0.50-1.43) vs open radical prostatectomy. Robot-assisted radical prostatectomy was also associated with less use of additional treatment (HR 0.78, 0.70-0.86). Robot-assisted radical prostatectomy has comparable intermediate cancer control as evidenced by less use of additional postoperative cancer therapies and equivalent cancer specific and overall survival. Longer term followup is needed to assess for differences in prostate cancer specific survival, which was similar during intermediate followup. Our findings have significant quality and cost implications, and provide reassurance regarding the adoption of more
Mechanism of the positive effect of poly(ethylene glycol) addition in enzymatic hydrolysis of steam pretreated lignocelluloses.

PubMed

Sipos, Bálint; Szilágyi, Mátyás; Sebestyén, Zoltán; Perazzini, Raffaella; Dienes, Dóra; Jakab, Emma; Crestini, Claudia; Réczey, Kati

2011-11-01

The efficiency of enzymatic hydrolysis of lignocellulses can be increased by addition of surfactants and polymers, such as poly(ethylene glycol) (PEG). The effect of PEG addition on the cellulase adsorption was tested on various steam pretreated lignocellulose substrates (spruce, willow, hemp, corn stover, wheat straw, sweet sorghum bagasse). A positive effect of PEG addition was observed, as protein adsorption has decreased and free enzyme activities (FP, β-glucosidase) have increased due to the additive. However, the degree of enhancement differed among the substrates, being highest on steam pretreated spruce. Results of lignin analysis (pyrolysis-GC/MS, (31)P NMR) suggest that the effect of PEG addition is in connection with the amount of unsubstituted phenolic hydroxyl groups of lignin in the substrate. Adsorption experiments using two commercial enzyme preparations, Celluclast 1.5L (Trichoderma reesei cellulase) and Novozym 188 (Aspergillus niger β-glucosidase) suggested that enzyme origins affected on the adsorptivity of β-glucosidases. Copyright © 2011 Académie des sciences. Published by Elsevier SAS. All rights reserved.
Functional Additive Mixed Models

PubMed Central

Scheipl, Fabian; Staicu, Ana-Maria; Greven, Sonja

2014-01-01

We propose an extensive framework for additive regression models for correlated functional responses, allowing for multiple partially nested or crossed functional random effects with flexible correlation structures for, e.g., spatial, temporal, or longitudinal functional data. Additionally, our framework includes linear and nonlinear effects of functional and scalar covariates that may vary smoothly over the index of the functional response. It accommodates densely or sparsely observed functional responses and predictors which may be observed with additional error and includes both spline-based and functional principal component-based terms. Estimation and inference in this framework is based on standard additive mixed models, allowing us to take advantage of established methods and robust, flexible algorithms. We provide easy-to-use open source software in the pffr() function for the R-package refund. Simulations show that the proposed method recovers relevant effects reliably, handles small sample sizes well and also scales to larger data sets. Applications with spatially and longitudinally observed functional data demonstrate the flexibility in modeling and interpretability of results of our approach. PMID:26347592
Functional Additive Mixed Models.

PubMed

Scheipl, Fabian; Staicu, Ana-Maria; Greven, Sonja

2015-04-01

We propose an extensive framework for additive regression models for correlated functional responses, allowing for multiple partially nested or crossed functional random effects with flexible correlation structures for, e.g., spatial, temporal, or longitudinal functional data. Additionally, our framework includes linear and nonlinear effects of functional and scalar covariates that may vary smoothly over the index of the functional response. It accommodates densely or sparsely observed functional responses and predictors which may be observed with additional error and includes both spline-based and functional principal component-based terms. Estimation and inference in this framework is based on standard additive mixed models, allowing us to take advantage of established methods and robust, flexible algorithms. We provide easy-to-use open source software in the pffr() function for the R-package refund. Simulations show that the proposed method recovers relevant effects reliably, handles small sample sizes well and also scales to larger data sets. Applications with spatially and longitudinally observed functional data demonstrate the flexibility in modeling and interpretability of results of our approach.
Using indirect comparisons to compare interventions within a Cochrane review: a tool for comparative effectiveness research.

PubMed

Agapova, Maria; Devine, Emily B; Nguyen, Hiep; Wolf, Fredric M; Inoue, Lurdes Y T

2014-07-01

Assessing relative performance among competing interventions is an important part of comparative effectiveness research. Bayesian indirect comparisons add information to existing Cochrane reviews, such as which intervention is likely to perform best. However, heterogeneity variance priors may influence results and, potentially, clinical guidance. We highlight the features of Bayesian indirect comparisons using a case study of a Cochrane review update in asthma care. The probability that one self-management educational intervention outperforms others is estimated. Simulation studies investigate the effect of heterogeneity variance prior distributions. Results suggest a 55% probability that individual education is best, followed by combination (39%) and group (6%). The intervention with few trials was sensitive to prior distributions. Bayesian indirect comparisons updates of Cochrane reviews are valuable comparative effectiveness research tools.
Prioritization of patient-centered comparative effectiveness research for osteoarthritis.

PubMed

Gierisch, Jennifer M; Myers, Evan R; Schmit, Kristine M; McCrory, Douglas C; Coeytaux, Remy R; Crowley, Matthew J; Chatterjee, Ranee; Kendrick, Amy S; Sanders, Gillian D

2014-06-17

Osteoarthritis is a leading cause of disability in the United States. This article describes a prioritized research agenda about osteoarthritis management developed for the Patient-Centered Outcomes Research Institute. Evidence gaps were identified by reviewing existing literature and engaging diverse stakeholders to expand and refine gaps. Stakeholders ranked evidence gaps by importance from their perspectives.Prioritized evidence gaps included the need to determine or evaluate key patient-centered outcomes; optimal duration, intensity, and frequency of nonsurgical interventions; whether the comparative effectiveness of nonsurgical interventions varies by socioeconomic factors; when and how to transition from nonsurgical to surgical interventions; effective ways to engage patients in self-management and promote long-term behavior change; standardized screening tools that improve early diagnosis; biomechanical strategies that improve symptoms; mechanisms for promoting and delivering coordinated, longitudinal care; and comparative effectiveness of nonsurgical therapies. Searches of PubMed and ClinicalTrials.gov showed many recent and ongoing studies addressing comparative effectiveness of nonsurgical interventions; relatively few of these evaluated treatments across categories (for example, drug therapy vs. weight management) or combined categories of treatment. Few studies addressed other high-priority evidence gaps.
Pure mechanistic analysis of additive neuroprotective effects between baicalin and jasminoidin in ischemic stroke mice.

PubMed

Wang, Peng-Qian; Liu, Qiong; Xu, Wen-Juan; Yu, Ya-Nan; Zhang, Ying-Ying; Li, Bing; Liu, Jun; Wang, Zhong

2018-06-01

Both baicalin (BA) and jasminoidin (JA) are active ingredients in Chinese herb medicine Scutellaria baicalensis and Fructus gardeniae, respectively. They have been shown to exert additive neuroprotective action in ischemic stroke models. In this study we used transcriptome analysis to explore the pure therapeutic mechanisms of BA, JA and their combination (BJ) contributing to phenotype variation and reversal of pathological processes. Mice with middle cerebral artery obstruction were treated with BA, JA, their combination (BJ), or concha margaritifera (CM). Cerebral infarct volume was examined to determine the effect of these compounds on phenotype. Using the hippocampus microarray and ingenuity pathway analysis (IPA) software, we exacted the differentially expressed genes, networks, pathways, and functions in positive-phenotype groups (BA, JA and BJ) by comparing with the negative-phenotype group (CM). In the BA, JA, and BJ groups, a total of 7, 4, and 11 specific target molecules, 1, 1, and 4 networks, 51, 59, and 18 canonical pathways and 70, 53, and 64 biological functions, respectively, were identified. Pure therapeutic mechanisms of BA and JA were mainly overlapped in specific target molecules, functions and pathways, which were related to the nervous system, inﬂammation and immune response. The specific mechanisms of BA and JA were associated with apoptosis and cancer-related signaling and endocrine and hormone regulation, respectively. In the BJ group, novel target profiles distinct from mono-therapies were revealed, including 11 specific target molecules, 10 functions, and 10 pathways, the majority of which were related to a virus-mediated immune response. The pure additive effects between BA and JA were based on enhanced action in virus-mediated immune response. This pure mechanistic analysis may provide a clearer outline of the target profiles of multi-target compounds and combination therapies.
Effects of Sucrose Stearate Addition on the Quality Improvement of Ready-To-Eat Samgyetang During Storage at 25℃

PubMed Central

2014-01-01

The effects of sucrose stearate at various concentrations (0.1%, 0.2%, and 0.3%, w/v) on the physico-chemical characteristics of ready-to-eat (RTE) Samgyetang were investigated during storage at 25℃ for 12 mon. Over the storage duration, the addition of sucrose stearate had no significant effects on the proximate composition of Samgyetang, including meat, broth, and porridge, or the hardness and spreadability of the porridge, although it resulted in significantly higher CIE L* values for the porridge. The CIE L* values of Samgyetang porridge with added sucrose stearate increased until 9 mon, while the control decreased until 6 mon, and the values for both changed insignificantly thereafter. The breast meat of Samgyetang treated with sucrose stearate showed higher percentages of polyunsaturated fatty acid after 3 mon and lower percentages of monounsaturated fatty acid after 6 mon compared to the control (p<0.05), while no significant differences were observed with the different sucrose stearate concentrations (p>0.05). The overall sensory acceptability scores were higher at sucrose stearate concentrations of 0.2% or 0.3% after 6 mon and at 0.1% after 9 mon compared to those of the control. PMID:26761503
Contrasting effects of nitrogen and phosphorus addition on soil respiration in an alpine grassland on the Qinghai-Tibetan Plateau

PubMed Central

Ren, Fei; Yang, Xiaoxia; Zhou, Huakun; Zhu, Wenyan; Zhang, Zhenhua; Chen, Litong; Cao, Guangmin; He, Jin-Sheng

2016-01-01

High soil organic carbon content, extensive root biomass, and low nutrient availability make alpine grasslands an important ecosystem for assessing the influence of nutrient enrichment on soil respiration (SR). We conducted a four-year (2009–2012) field experiment in an alpine grassland on the Qinghai-Tibetan Plateau to examine the individual and combined effects of nitrogen (N, 100 kg ha−1year−1) and phosphorus (P, 50 kg ha−1year−1) addition on SR. We found that both N and P addition did not affect the overall growing-season SR but effects varied by year: with N addition SR increased in the first year but decreased during the last two years. However, while P addition did not affect SR during the first two years, SR increased during the last two years. No interactive effects of N and P addition were observed, and both N addition and P addition reduced heterotrophic respiration during the last year of the experiment. N and P addition affected SR via different processes: N mainly affected heterotrophic respiration, whereas P largely influenced autotrophic respiration. Our results highlight the divergent effects of N and P addition on SR and address the important potential of P enrichment for regulating SR and the carbon balance in alpine grasslands. PMID:27721415
The addition effect of Tunisian date seed fibers on the quality of chocolate spreads.

PubMed

Bouaziz, Mohamed Ali; Abbes, Fatma; Mokni, Abir; Blecker, Christophe; Attia, Hamadi; Besbes, Souhail

2017-04-01

Novel chocolate spreads were enriched by soluble and insoluble dietary fibers from Tunisian Deglet Nour date seeds at 1, 2, 3, 4, and 5% levels in the conventional chocolate spread. Defatted Deglet Nour date seeds, date seed soluble fiber concentrate (DSSFC) and date seed insoluble fiber concentrate (DSIFC) were characterized by high levels of dietary fibers (80-90%). Chocolate spread enriched with 5% of DSSFC presented the highest oil binding capacity (304.62%) compared to the control (102%). Whatever the DSIFC and DSSFC incorporation levels, no significant difference was recorded between the firmness, chewiness, and adhesiveness of prepared chocolate spreads compared to the control (p < .05). Sensory evaluation revealed that all prepared chocolate spreads enriched by DSIFC and DSSFC were accepted by panelists. These results indicated the value of date seeds as new source of dietary fibers to develop chocolate spread and could also improve health benefits and functional properties. Tunisia is considered to be one of the dates-producing countries. The mean annual yield of date fruits is about 200,000 tons. From this, around 20,000 tons of date seeds could be collected. This by-product of date processing industries could be regarded as an excellent source of dietary fiber with interesting technological functionality and many beneficial effects on human health. Then, date seeds could present a value addition by extraction and use of date seed fiber concentrate in chocolate spread formulation. © 2016 Wiley Periodicals, Inc.

Co-occurring nonnative woody shrubs have additive and non-additive soil legacies.

PubMed

Kuebbing, Sara E; Patterson, Courtney M; Classen, Aimée T; Simberloff, Daniel

2016-09-01

To maximize limited conservation funds and prioritize management projects that are likely to succeed, accurate assessment of invasive nonnative species impacts is essential. A common challenge to prioritization is a limited knowledge of the difference between the impacts of a single nonnative species compared to the impacts of nonnative species when they co-occur, and in particular predicting when impacts of co-occurring nonnative species will be non-additive. Understanding non-additivity is important for management decisions because the management of only one co-occurring invader will not necessarily lead to a predictable reduction in the impact or growth of the other nonnative plant. Nonnative plants are frequently associated with changes in soil biotic and abiotic characteristics, which lead to plant-soil interactions that influence the performance of other species grown in those soils. Whether co-occurring nonnative plants alter soil properties additively or non-additively relative to their effects on soils when they grow in monoculture is rarely addressed. We use a greenhouse plant-soil feedback experiment to test for non-additive soil impacts of two common invasive nonnative woody shrubs, Lonicera maackii and Ligustrum sinense, in deciduous forests of the southeastern United States. We measured the performance of each nonnative shrub, a native herbaceous community, and a nonnative woody vine in soils conditioned by each shrub singly or together in polyculture. Soils conditioned by both nonnative shrubs had non-additive impacts on native and nonnative performance. Root mass of the native herbaceous community was 1.5 times lower and the root mass of the nonnative L. sinense was 1.8 times higher in soils conditioned by both L. maackii and L. sinense than expected based upon growth in soils conditioned by either shrub singly. This result indicates that when these two nonnative shrubs co-occur, their influence on soils disproportionally favors persistence
Commentary: Will academia embrace comparative effectiveness research?

PubMed

Lauer, Michael S

2011-06-01

In recent medical history, a number of therapies that were widely adopted based on observational data or pathophysiological constructs turned out to be useless or even harmful when tested in randomized comparative effectiveness trials. These therapies not only harmed patients but also did a disservice to the practical education of medical students, residents, and fellows. These trainees effectively learned that it is acceptable to implement practices even in the absence of high-quality evidence, and so they may not have learned how to analyze the quality of evidence. In this issue of Academic Medicine, seven groups address critical aspects of the intersection between comparative effectiveness research (CER) and academic medicine. Their topics include the need at academic health centers for cultural shifts, for addressing conflicts of interest, for exploiting academic talent and electronic information resources, for interacting well with policy makers, for incorporating economic evaluations, for incorporating tests of educational methods, for developing multidisciplinary models, and for integrating CER into "predictive health." This commentary argues that academia must embrace CER by insisting on the highest levels of evidence, by viewing all clinical interactions as opportunities for scientific advancement, by setting an example for policy makers and colleagues working in nonacademic settings, and by engaging all physicians in the clinical research enterprise.
Effect of additional elements on compositional modulated atomic layered structure of hexagonal Co{sub 80}Pt{sub 20} alloy films with superlattice diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinata, Shintaro; Research Fellowship Division Japan Society for the Promotion of Science; Yamane, Akira

2016-05-15

The effect of additional element on compositionally modulated atomic layered structure of hexagonal Co{sub 80}Pt{sub 20} alloy films with superlattice diffraction was investigated. In this study it is found that the addition of Cr or W element to Co{sub 80}Pt{sub 20} alloy film shows less deterioration of hcp stacking structure and compositionally modulated atomic layer stacking structure as compared to Si or Zr or Ti with K{sub u} of around 1.4 or 1.0 × 10{sup 7} erg/cm{sup 3} at 5 at.% addition. Furthermore, for O{sub 2} addition of O{sub 2} ≥ 5.0 × 10{sup −3} Pa to CoPt alloy, compositionallymore » modulated atomic layer stacking structure will be deteriorated with enhancement of formation of hcp stacking structure which leads higher K{sub u} of 1.0 × 10{sup 7} erg/cm{sup 3}.« less
Effectiveness of Taste Lessons with and without additional experiential learning activities on children's willingness to taste vegetables.

PubMed

Battjes-Fries, Marieke C E; Haveman-Nies, Annemien; Zeinstra, Gertrude G; van Dongen, Ellen J I; Meester, Hante J; van den Top-Pullen, Rinelle; Van't Veer, Pieter; de Graaf, Kees

2017-02-01

This study assessed the effectiveness of the Dutch school programme Taste Lessons with and without additional experiential learning activities on children's willingness to taste unfamiliar vegetables. Thirty-three primary schools (877 children in grades 6-7 with a mean age of 10.3 years) participated in Taste Lessons Vegetable Menu (TLVM, lessons and extra activities), Taste Lessons (TL, lessons), or a control group. A baseline and follow-up measurement was used to assess for each child: number of four familiar and four unfamiliar vegetables tasted, quantity tasted, choice of vegetable of which to eat more, and number of vegetables willing to taste again later. Furthermore, children filled out a questionnaire on daily vegetable intake and food neophobia. Multilevel and Cox regression analyses were conducted to compare changes in the outcome measures between the three study groups. No significant intervention effects were found on willingness to taste unfamiliar vegetables. Neither were effects found on familiar vegetables, except for number of familiar vegetables tasted (p < 0.05). Furthermore, no significant intervention effects were found on daily vegetable consumption and food neophobia. These results indicate that more intensive school-based nutrition education activities are needed to increase children's willingness to taste unfamiliar vegetables and increase their vegetable intake. Copyright © 2016. Published by Elsevier Ltd.
Qualitative Comparative Analysis: A Hybrid Method for Identifying Factors Associated with Program Effectiveness.

PubMed

Cragun, Deborah; Pal, Tuya; Vadaparampil, Susan T; Baldwin, Julie; Hampel, Heather; DeBate, Rita D

2016-07-01

Qualitative comparative analysis (QCA) was developed over 25 years ago to bridge the qualitative and quantitative research gap. Upon searching PubMed and the Journal of Mixed Methods Research , this review identified 30 original research studies that utilized QCA. Perceptions that QCA is complex and provides few relative advantages over other methods may be limiting QCA adoption. Thus, to overcome these perceptions, this article demonstrates how to perform QCA using data from fifteen institutions that implemented universal tumor screening (UTS) programs to identify patients at high risk for hereditary colorectal cancer. In this example, QCA revealed a combination of conditions unique to effective UTS programs. Results informed additional research and provided a model for improving patient follow-through after a positive screen.
Lessons from comparative effectiveness research methods development projects funded under the Recovery Act.

PubMed

Zurovac, Jelena; Esposito, Dominick

2014-11-01

The American Recovery and Reinvestment Act of 2009 (ARRA) directed nearly US$29.2 million to comparative effectiveness research (CER) methods development. To help inform future CER methods investments, we describe the ARRA CER methods projects, identify barriers to this research and discuss the alignment of topics with published methods development priorities. We used several existing resources and held discussions with ARRA CER methods investigators. Although funded projects explored many identified priority topics, investigators noted that much work remains. For example, given the considerable investments in CER data infrastructure, the methods development field can benefit from additional efforts to educate researchers about the availability of new data sources and about how best to apply methods to match their research questions and data.
Qualitative Comparative Analysis: A Hybrid Method for Identifying Factors Associated with Program Effectiveness

PubMed Central

Cragun, Deborah; Pal, Tuya; Vadaparampil, Susan T.; Baldwin, Julie; Hampel, Heather; DeBate, Rita D.

2015-01-01

Qualitative comparative analysis (QCA) was developed over 25 years ago to bridge the qualitative and quantitative research gap. Upon searching PubMed and the Journal of Mixed Methods Research, this review identified 30 original research studies that utilized QCA. Perceptions that QCA is complex and provides few relative advantages over other methods may be limiting QCA adoption. Thus, to overcome these perceptions, this article demonstrates how to perform QCA using data from fifteen institutions that implemented universal tumor screening (UTS) programs to identify patients at high risk for hereditary colorectal cancer. In this example, QCA revealed a combination of conditions unique to effective UTS programs. Results informed additional research and provided a model for improving patient follow-through after a positive screen. PMID:27429602
Cost Effectiveness Ratio: Evaluation Tool for Comparing the Effectiveness of Similar Extension Programs

ERIC Educational Resources Information Center

Jayaratne, K. S. U.

2015-01-01

Extension educators have been challenged to be cost effective in their educational programming. The cost effectiveness ratio is a versatile evaluation indicator for Extension educators to compare the cost of achieving a unit of outcomes or educating a client in similar educational programs. This article describes the cost effectiveness ratio and…
Effects of additives on 2,4,6-trinitrotoluene (TNT) removal and its mineralization in aqueous solution by gamma irradiation.

PubMed

Lee, Byungjin; Jeong, Seung-Woo

2009-06-15

The effects of additives (i.e., methanol, EDTA, mannitol, thiourea, nitrous oxide, oxygen and ozone) on gamma irradiation of 2,4,6-trinitrotoluene (TNT) were investigated to elucidate the initial reaction mechanism of TNT degradation and suggest an practical method for complete by-product removal. All additives, except thiourea, significantly increased the TNT removal efficiency by gamma irradiation. The overall results of the additive experiments implied that the TNT decomposition would be initiated by *OH, e(aq)(-), and HO(2*)/O(2*)(-), and also implied that *H did not have any direct effect on the TNT decomposition. Additions of methanol and nitrous oxide were more effective in TNT removal than the other additives, achieving complete removal of TNT at doses below 20 kGy. Total organic carbon (TOC) of the irradiated solution was analyzed to evaluate the degree of TNT mineralization under the additive conditions. TOC under the nitrous oxide addition was removed rapidly, and complete TNT mineralization was thus achieved at 50 kGy. Methanol addition was very effective in the TNT removal, but it was not effective in reduction in TOC. Trinitrobenzene (TNB), oxalic acid and glyoxalic acid were detected as radiolytic organic by-products, while ammonia and nitrate were detected as radiolytic inorganic by-products. The most efficient TNT removal and its mineralization by gamma irradiation would be achieved by supersaturating the solution with nitrous oxide before irradiation.
The effect of guar gum addition to a semisolid meal on appetite related to blood glucose, in dieting men.

PubMed

Kovacs, E M R; Westerterp-Plantenga, M S; Saris, W H M; Melanson, K J; Goossens, I; Geurten, P; Brouns, F

2002-08-01

To investigate whether addition of modified guar gum (GG) to a low-energy semisolid meal might be effective on appetite by modifying the response of blood glucose and other blood parameters. Three intervention periods of 2 weeks each, separated by washout periods of 4 weeks. Randomized and cross-over design. Fifteen overweight male subjects (mean+/-s.d.; age, 44+/-9 y; body mass index, 28.6+/-1.8 kg/m(2)). Subjects consumed a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without (SSM) addition of 2.5 g GG, or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, plus a dinner of the subject's own choice. At the end of each intervention, time and number of meal initiations, dynamics of blood glucose and other blood parameters, and appetite ratings such as hunger and satiety were determined in a time-blinded situation. The changes in blood glucose from meal initiation to blood glucose peak and from peak to nadir were smaller with SSM+ and SM compared to SSM. Satiety before the third meal was higher with SSM+ and SM compared to SSM (P<0.01). Meal pattern, general appetite and total energy intake were similar for all treatments. We conclude that, similar to SM, SSM+ resulted in a more moderate change in blood glucose compared to SSM and positively affected satiety before the third meal, while general appetite, total energy intake and meal pattern did not differ.
Mixed Model Methods for Genomic Prediction and Variance Component Estimation of Additive and Dominance Effects Using SNP Markers

PubMed Central

Da, Yang; Wang, Chunkao; Wang, Shengwen; Hu, Guo

2014-01-01

We established a genomic model of quantitative trait with genomic additive and dominance relationships that parallels the traditional quantitative genetics model, which partitions a genotypic value as breeding value plus dominance deviation and calculates additive and dominance relationships using pedigree information. Based on this genomic model, two sets of computationally complementary but mathematically identical mixed model methods were developed for genomic best linear unbiased prediction (GBLUP) and genomic restricted maximum likelihood estimation (GREML) of additive and dominance effects using SNP markers. These two sets are referred to as the CE and QM sets, where the CE set was designed for large numbers of markers and the QM set was designed for large numbers of individuals. GBLUP and associated accuracy formulations for individuals in training and validation data sets were derived for breeding values, dominance deviations and genotypic values. Simulation study showed that GREML and GBLUP generally were able to capture small additive and dominance effects that each accounted for 0.00005–0.0003 of the phenotypic variance and GREML was able to differentiate true additive and dominance heritability levels. GBLUP of the total genetic value as the summation of additive and dominance effects had higher prediction accuracy than either additive or dominance GBLUP, causal variants had the highest accuracy of GREML and GBLUP, and predicted accuracies were in agreement with observed accuracies. Genomic additive and dominance relationship matrices using SNP markers were consistent with theoretical expectations. The GREML and GBLUP methods can be an effective tool for assessing the type and magnitude of genetic effects affecting a phenotype and for predicting the total genetic value at the whole genome level. PMID:24498162
Mixed model methods for genomic prediction and variance component estimation of additive and dominance effects using SNP markers.

PubMed

Da, Yang; Wang, Chunkao; Wang, Shengwen; Hu, Guo

2014-01-01

We established a genomic model of quantitative trait with genomic additive and dominance relationships that parallels the traditional quantitative genetics model, which partitions a genotypic value as breeding value plus dominance deviation and calculates additive and dominance relationships using pedigree information. Based on this genomic model, two sets of computationally complementary but mathematically identical mixed model methods were developed for genomic best linear unbiased prediction (GBLUP) and genomic restricted maximum likelihood estimation (GREML) of additive and dominance effects using SNP markers. These two sets are referred to as the CE and QM sets, where the CE set was designed for large numbers of markers and the QM set was designed for large numbers of individuals. GBLUP and associated accuracy formulations for individuals in training and validation data sets were derived for breeding values, dominance deviations and genotypic values. Simulation study showed that GREML and GBLUP generally were able to capture small additive and dominance effects that each accounted for 0.00005-0.0003 of the phenotypic variance and GREML was able to differentiate true additive and dominance heritability levels. GBLUP of the total genetic value as the summation of additive and dominance effects had higher prediction accuracy than either additive or dominance GBLUP, causal variants had the highest accuracy of GREML and GBLUP, and predicted accuracies were in agreement with observed accuracies. Genomic additive and dominance relationship matrices using SNP markers were consistent with theoretical expectations. The GREML and GBLUP methods can be an effective tool for assessing the type and magnitude of genetic effects affecting a phenotype and for predicting the total genetic value at the whole genome level.
Publication patterns of comparative effectiveness research in spine neurosurgery.

PubMed

Hueng, Dueng-Yuan; Tsai, Chia-Lin; Hsu, Shih-Wei; Ma, Hsin-I

2012-07-01

The purpose of this study was to investigate publication patterns for comparative effectiveness research (CER) on spine neurosurgery. The authors searched the PubMed database for the period 1980-2012 using the key words "cost analysis," "utility analysis," "cost-utility," "outcomes research," "practical clinical research," "comparator trial," and "comparative effectiveness research," linked with "effectiveness" and "spine neurosurgery." From 1980 through April 9, 2012, neurosurgery CER publications accounted for 1.38% of worldwide CER publications (8657 of 626,330 articles). Spine neurosurgery CER accounted for only 0.02%, with 132 articles. The journal with the greatest number of publications on spine neurosurgery CER was Spine, followed by the Journal of Neurosurgery: Spine. The average annual publication rate for spine neurosurgery CER during this period was 4 articles (132 articles in 33 years), with 68 (51.52%) of the 132 articles being published within the past 5 years and a rising trend beginning in 2008. The top 3 contributing countries were the US, Turkey, and Japan, with 68, 8, and 7 articles, respectively. Only 8 regular articles (6.06%) focused on cost analysis. There is a paucity of publications using CER methodology in spine neurosurgery. Few articles address the issue of cost analysis. The promotion of continuing medical education in CER methodology is warranted. Further investigations to address cost analysis in comparative effectiveness studies of spine neurosurgery are crucial to expand the application of CER in public health.
Clinical and Cost Effectiveness of Apixaban Compared to Aspirin in Patients with Atrial Fibrillation: An Australian Perspective.

PubMed

Ademi, Zanfina; Pasupathi, Kumar; Liew, Danny

2017-06-01

To determine the clinical and cost effectiveness of apixaban compared to aspirin in the prevention of thromboembolic events for patients with atrial fibrillation for whom vitamin K antagonist (VKA) therapy (warfarin) has been considered unsuitable. A previously published Markov model with yearly cycles was updated. Information from the Apixaban Versus Acetylsalicylic acid to prevent Stroke in Atrial Fibrillation (AVERROES) trial in combination with other population data was used to simulate the costs and effects of apixaban compared to aspirin over 10 years. The model comprised five health states. Costs from an Australian healthcare perspective were estimated from published sources for the year 2015. The main outcome of interest was number needed to treat (NNT), number needed to harm (NNH), the incremental cost-effectiveness ratio (ICER) [cost per quality-adjusted life-year (QALY) gained, and cost per year of life saved (YoLS)]. Costs and benefits were discounted at 5.0 % per annum. For each patient followed up over 10 years, NNT to prevent one additional event (thromboembolic event, death) for apixaban compared to aspirin was 4.6 and 11.8, respectively. NNH was 35.9 for non-fatal major bleeding. The model predicted that compared to aspirin, apixaban would lead to 0.33 YoLS (discounted) and 0.29 QALYs gained (discounted), at an incremental cost of AUD$1996 (discounted). This resulted in ICERs of AUD$6011 per YoLS and AUD$6929 per QALY gained. In the sensitivity analyses, ICERs were most sensitive to efficacy measures derived from the AVERROES study, and time frame. Compared to aspirin, apixaban is likely to be cost effective in preventing thromboembolic disease among VKA unsuitable patients with atrial fibrillation.
The effect of a lignosulphate type additive on the lead—acid battery positive plate reactions

NASA Astrophysics Data System (ADS)

Ovuru, S. E.; Harrison, J. A.

The electrochemical formation of lead dioxide has been investigated at a lead electrode in a 5 M sulphuric acid solution, and in the presence of phosphoric acid and lignosulphate-type additive. The formation of lead dioxide from lead sulphate, and the reverse reaction, have been investigated by the linear potential sweep method, by an impedance method in which the impedance was measured at the end of each pulse during a potential pulse train, and by a charging curve method in which the current and charge was measured during a similar potential pulse train. The charge measurements prove that the main effect of the additive is to decrease the accompanying oxygen evolution reaction. The impedance measurements, however, show that the additive has a small but significant effect on the structure of the solid lead sulphate and lead dioxide layers.
When good operations go bad: The additive effect of comorbidity and postoperative complications on readmission after pulmonary lobectomy.

PubMed

Jean, Raymond A; Chiu, Alexander S; Boffa, Daniel J; Detterbeck, Frank C; Blasberg, Justin D; Kim, Anthony W

2018-05-22

Hospital readmission after major thoracic surgery has a marked effect on health care delivery, particularly in the era of value-based reimbursement. We sought to investigate the additive impact of comorbidity and postoperative complications on the risk of readmission after thoracic lobectomy. We queried the Nationwide Readmission Database of the Healthcare Cost and Utilization Project between 2010 and 2014 for discharges after pulmonary lobectomy with a primary diagnosis of lung cancer. We compared 90-day all-cause readmission rates across the presence of Elixhauser comorbidities and postoperative complications. Adjusted logistic and linear regression, accounting for patient and hospital factors were used to calculate the mean change in readmission rate by the number of comorbidities and postoperative complications. A total of 87,894 patients undergoing pulmonary lobectomies were identified during the study period, of whom 15,858 (18.0%) were readmitted for any cause within 90 days of discharge. After adjusting for other factors, each additional comorbidity and postoperative complication were associated with a 2.0% and 2.7% increased probability of readmission, respectively (both P < .0001). Patients with a low burden of low comorbidities were readmitted more frequently for postoperative complications, while those with a high burden of comorbidities were readmitted more frequently for chronic disease. Among patients with the lowest risk profile, there was an 11.7% readmission rate. Adjusting for other factors, each additional comorbidity and complication increased this rate by approximately 2.0% and 2.7%, respectively. These results demonstrate that the avoidance of postoperative complications may represent an effective mechanism for decreasing readmissions after thoracic surgery. Copyright © 2018 Elsevier Inc. All rights reserved.
Effect of trace element addition and increasing organic loading rates on the anaerobic digestion of cattle slaughterhouse wastewater.

PubMed

Schmidt, Thomas; McCabe, Bernadette K; Harris, Peter W; Lee, Seonmi

2018-05-18

In this study, anaerobic digestion of slaughterhouse wastewater with the addition of trace elements was monitored for biogas quantity, quality and process stability using CSTR digesters operated at mesophilic temperature. The determination of trace element concentrations was shown to be deficient in Fe, Ni, Co, Mn and Mo compared to recommendations given in the literature. Addition of these trace elements resulted in enhanced degradation efficiency, higher biogas production and improved process stability. Higher organic loading rates and lower hydraulic retention times were achieved in comparison to the control digesters. A critical accumulation of volatile fatty acids was observed at an organic loading rate of 1.82 g L -1  d -1 in the control compared to 2.36 g L -1  d -1 in the digesters with trace element addition. The improved process stability was evident in the final weeks of experimentation, in which control reactors produced 84% less biogas per day compared to the reactors containing trace elements. Copyright © 2018 Elsevier Ltd. All rights reserved.
Effect of soy addition on microwavable pocket-type flat doughs.

PubMed

Serventi, Luca; Sachleben, Joseph; Vodovotz, Yael

2011-01-01

Microwavable frozen baked goods are widely used by the food industry. However, the altered heat and mass transfer patterns associated with microwave radiation result in tough and rubbery baked products due to reduced plasticization of the polymers. Ingredients with high water-holding capacity and high content of polar lipids have been shown to enhance gluten plasticization and to improve water retention. Therefore, this study explored the physicochemical changes imparted by microwave baking of pocket-type flat doughs with and without soy added at 10%, 20%, and 26% and compared these to their conventionally baked counterparts. Microwave baking resulted in a soft, rubbery, and tough wheat product with increased "freezable" water. Soy was added to the formulation as a means to improve polymer plasticization. Conventional baking of soy doughs resulted in rubbery and tough products due to changes in water state and mobility (freezable water approximately 15 compared with 7.09 of the control). However, soy reduced the cohesiveness of the microwave baked products reaching the lowest value at 20% soy addition (cohesiveness 0.33 ± 1, comparable to that of the conventionally baked control). These data suggest that reduction of water mobility induced by soy proteins and polar lipids (confirmed by thermogravimetric analysis [TGA] and ¹H nuclear magnetic resonance [¹H NMR]) possibly plasticized the starch-gluten network of microwave baked soy doughs. Thus, soy was shown to improve the texture of microwave baked pocket-type flat doughs although further formula optimization is warranted. Microwavable pocket-type flat doughs are used frequently by the food industry to enrobe meat, vegetable, and sweet items for convenient meal delivery. Microwave heating of such doughs induces the development of crustless products compared to conventionally baked products, resulting in a tough and rubbery texture. Partial substitution of wheat flour with soy, in the form of soy flour and soy
Effects of SO/sub 2/ torch gas additions on GTA weld shape

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heiple, C.R.; Burgardt, P.

1984-01-01

Small additions of sulfur or oxygen to the GTA weld pool in steels with low weld d/w (depth/width) ratios substantially increases the weld d/w ratio and furthermore the improved weld d/w ratio is largely independent of reasonable variations in base metal sulfur and oxygen content. The addition of small concentrations of SO/sub 2/ to the normal argon shielding gas is a simple and effective way to add sulfur to the weld pool and increase weld d/w ratio. Autogenous bead-on-plate welds under otherwise identical welding conditions were made on stainless steel plate with SO/sub 2/ concentrations in the torch gas rangingmore » between 0 and 2000 ppM.« less
Effect of Ferrous Additives on Magnesia Stone Hydration

NASA Astrophysics Data System (ADS)

Zimich, V.

2017-11-01

The article deals with the modification of the magnesia binder with additives containing two- and three-valent iron cations which could be embedded in the chloromagnesium stone structure and also increase the strength from 60 MPa in a non-additive stone to 80MPa, water resistance from 0.58 for clear stone to 0.8 and reduce the hygroscopicity from 8% in the non-additive stone to 2% in the modified chloromagnesium stone. It is proposed to use the iron hydroxide sol as an additive in the quantities of up to 1% of the weight of the binder. The studies were carried out using the modern analysis methods: the differentialthermal and X-ray phase analysis. The structure was studied with an electron microscope with an X-ray microanalyzer. A two-factor plan-experiment was designed which allowed constructing mathematical models characterizing the influence of variable factors, such as the density of the zatcher and the amount of sol in the binder, on the basic properties of the magnesian stone. The result of the research was the magnesia stone with the claimed properties and formed from minerals characteristic for magnesian materials as well as additionally formed from amachenite and goethite. It has been established that a highly active iron hydroxide sol the ion sizes of which are commensurate with magnesium ions is actively incorporated into the structure of pentahydroxychloride and magnesium hydroxide changing the habit of crystals compacting the structure of the stone and changing its hygroscopicity.

Comparative study of the molecularly imprinted polymers prepared by reversible addition-fragmentation chain transfer "bulk" polymerization and traditional radical "bulk" polymerization.

PubMed

Ma, Yue; Pan, Guoqing; Zhang, Ying; Guo, Xianzhi; Zhang, Huiqi

2013-05-01

Bisphenol A (BPA) and propranolol-imprinted polymers have been prepared via both reversible addition-fragmentation chain transfer "bulk" polymerization (RAFTBP) and traditional radical "bulk" polymerization (TRBP) under similar reaction conditions, and their equilibrium binding properties were compared in detail for the first time. The chemical compositions, specific surface areas, equilibrium bindings, and selectivity of the obtained molecularly imprinted polymers (MIPs) were systematically characterized. The experimental results showed that the MIPs with molecular imprinting effects and quite fast binding kinetics could be readily prepared via RAFTBP, but they did not show improved template binding properties in comparison with those prepared via TRBP, which is in sharp contrast to many previous reports. This could be attributed to the heavily interrupted equilibrium between the dormant species and active radicals in the RAFT mechanism because of the occurrence of fast gelation during RAFTBP. The findings presented here strongly demonstrates that the application of controlled radical polymerizations (CRPs) in molecular imprinting does not always benefit the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. Copyright © 2013 John Wiley & Sons, Ltd.
Evaluation of antistripping additives.

DOT National Transportation Integrated Search

1989-01-01

Several chemical antistripping additives were used in field installations and compared to a similar installation using hydrated lime. The performance of the installations was monitored periodically, and material that was sampled during construction w...
Effects of polymer additives on Rayleigh-Taylor turbulence.

PubMed

Boffetta, G; Mazzino, A; Musacchio, S

2011-05-01

The role of polymer additives on the turbulent convective flow of a Rayleigh-Taylor system is investigated by means of direct numerical simulations of Oldroyd-B viscoelastic model. The dynamics of polymer elongations follows adiabatically the self-similar evolution of the turbulent mixing layer and shows the appearance of a strong feedback on the flow which originates a cutoff for polymer elongations. The viscoelastic effects on the mixing properties of the flow are twofold. Mixing is appreciably enhanced at large scales (the mixing layer growth rate is larger than that of the purely Newtonian case) and depleted at small scales (thermal plumes are more coherent with respect to the Newtonian case). The observed speed up of the thermal plumes, together with an increase of the correlations between temperature field and vertical velocity, contributes to a significant enhancement of heat transport. Our findings are consistent with a scenario of drag reduction induced by polymers. A weakly nonlinear model proposed by Fermi for the growth of the mixing layer is reported in the Appendix. © 2011 American Physical Society
Effects of four additive solutions on canine leukoreduced red cell concentrate quality during storage.

PubMed

Lacerda, Luciana A; Hlavac, Nicole R C; Terra, Silvia R; Back, Franciele P; Jane Wardrop, K; González, Félix H D

2014-09-01

Additive solutions (AS) and prestorage leukoreduction (LR) are important tools used to maintain erythrocyte viability during storage and avoid transfusion reactions in recipients, respectively. The purpose of the study was to determine the efficacy of a WBC filter (Immugard IIIRC) and compare the effect of 4 AS (phosphate-adenine-glucose-guanosine-gluconate-mannitol [PAGGGM], saline-adenine-glucose-mannitol [SAGM], Adsol, Optisol) on the in vitro quality of canine leukoreduced packed RBC units (pRBC) stored for 41 days. Five hundred milliliters of blood were collected from 8 healthy dogs each into 70 mL of citrate-phosphate-dextrose (CPD) solution, and were leukoreduced by a polyurethane filter. pRBC of each dog were divided equally into 4 bags containing a different AS. Bags were stored for 41 days at 4°C and evaluated every 10 days. Variables analyzed included pH, PCV, and% hemolysis, and lactate, glucose, potassium, sodium, ATP, and 2,3-diphosphoglycerate (2,3-DPG) concentrations. The LR resulted in residual WBC counts comparable to human standards. During storage, pH, and glucose, 2,3-DPG, and ATP concentrations decreased, and hemolysis, and lactate, sodium, and potassium concentrations increased (P < .05). Significant differences between AS were seen in the glucose and sodium concentrations, due to the composition of AS. Also, the pH maintained by PAGGGM at day 21 was significantly higher than that seen with SAGM or Adsol. All AS used gave satisfactory results during the first 21 days of storage based on the degree of hemolysis, and on ATP and 2,3-DPG concentrations. When compared with day 1 values, significant changes were seen in these variables by day 31 with all AS. © 2014 American Society for Veterinary Clinical Pathology and European Society for Veterinary Clinical Pathology.
Boosting structured additive quantile regression for longitudinal childhood obesity data.

PubMed

Fenske, Nora; Fahrmeir, Ludwig; Hothorn, Torsten; Rzehak, Peter; Höhle, Michael

2013-07-25

Childhood obesity and the investigation of its risk factors has become an important public health issue. Our work is based on and motivated by a German longitudinal study including 2,226 children with up to ten measurements on their body mass index (BMI) and risk factors from birth to the age of 10 years. We introduce boosting of structured additive quantile regression as a novel distribution-free approach for longitudinal quantile regression. The quantile-specific predictors of our model include conventional linear population effects, smooth nonlinear functional effects, varying-coefficient terms, and individual-specific effects, such as intercepts and slopes. Estimation is based on boosting, a computer intensive inference method for highly complex models. We propose a component-wise functional gradient descent boosting algorithm that allows for penalized estimation of the large variety of different effects, particularly leading to individual-specific effects shrunken toward zero. This concept allows us to flexibly estimate the nonlinear age curves of upper quantiles of the BMI distribution, both on population and on individual-specific level, adjusted for further risk factors and to detect age-varying effects of categorical risk factors. Our model approach can be regarded as the quantile regression analog of Gaussian additive mixed models (or structured additive mean regression models), and we compare both model classes with respect to our obesity data.
Effect of food additives on egg yolk gelation induced by freezing.

PubMed

Primacella, Monica; Fei, Tao; Acevedo, Nuria; Wang, Tong

2018-10-15

This study demonstrates technological advances in preventing yolk gelation during freezing and thawing. Gelation negatively affects yolk functionality in food formulation. Preventing gelation using 10% salt or sugar limits the application of the yolk. Novel food additives were tested to prevent gelation induced by freezing. Significant reduction (p < 0.05) in gel hardness of frozen-thawed yolk (45 h freezing at -20 °C) indicates that hydrolyzed carboxymethyl cellulose (HCMC), proline, and hydrolyzed egg white and yolk (HEW and HEY) are effective gelation inhibitors. The mechanisms in which these additives prevented gelation were further studied through measuring the changes in the amount of freezable water, lipoprotein particle size, and protein surface hydrophobicity. Overall, this study provides several alternatives of gelation inhibitor that have great potentials in replacing the use of salt or sugar in commercial operation of freezing egg yolk for shelf-life extension. Copyright © 2018 Elsevier Ltd. All rights reserved.
Immobilization of antimony in waste-to-energy bottom ash by addition of calcium and iron containing additives.

PubMed

Van Caneghem, Jo; Verbinnen, Bram; Cornelis, Geert; de Wijs, Joost; Mulder, Rob; Billen, Pieter; Vandecasteele, Carlo

2016-08-01

The leaching of Sb from waste-to-energy (WtE) bottom ash (BA) often exceeds the Dutch limit value of 0.32mgkg(-1) for recycling of BA in open construction applications. From the immobilization mechanisms described in the literature, it could be concluded that both Ca and Fe play an important role in the immobilization of Sb in WtE BA. Therefore, Ca and Fe containing compounds were added to the samples of the sand fraction of WtE BA, which in contrast to the granulate fraction is not recyclable to date, and the effect on the Sb leaching was studied by means of batch leaching tests. Results showed that addition of 0.5 and 2.5% CaO, 5% CaCl2, 2.5% Fe2(SO4)3 and 1% FeCl3 decreased the Sb leaching from 0.62±0.02mgkgDM(-1) to 0.20±0.02, 0.083±0.044, 0.25±0.01, 0.27±0.002 and 0.29±0.02mgkgDM(-1), respectively. Due to the increase in pH from 11.41 to 12.53 when 2.5% CaO was added, Pb and Zn leaching increased and exceeded the respective leaching limits. Addition of 5% CaCO3 had almost no effect on the Sb leaching, as evidenced by the resulting 0.53mgkgDM(-1) leaching concentration. This paper shows a complementary enhancement of the effect of Ca and Fe, by comparing the aforementioned Sb leaching results with those of WtE BA with combined addition of 2.5% CaO or 5% CaCl2 with 2.5% Fe2(SO4)3 or 1% FeCl3. These lab scale results suggest that formation of romeites with a high Ca content and formation of iron antimonate (tripuhyite) with a very low solubility are the main immobilization mechanisms of Sb in WtE BA. Besides the pure compounds and their mixtures, also addition of 10% of two Ca and Fe containing residues of the steel industry, hereafter referred to as R1 and R2, was effective in decreasing the Sb leaching from WtE BA below the Dutch limit value for reuse in open construction applications. To evaluate the long term effect of the additives, pilot plots of WtE BA with 10% of R1 and 5% and 10% of R2 were built and samples were submitted to leaching tests at
Additive Effect of Diesel Exhaust Particulates and Ozone on Airway Hyperresponsiveness and Inflammation in a Mouse Model of Asthma

PubMed Central

Choi, Inseon-S; Takizawa, Hajime; Rhim, TaiYoun; Lee, June-Hyuk; Park, Sung-Woo; Park, Choon-Sik

2005-01-01

Allergic airway diseases are related to exposure to atmospheric pollutants, which have been suggested to be one factor in the increasing prevalence of asthma. Little is known about the effect of ozone and diesel exhaust particulates (DEP) on the development or aggravation of asthma. We have used a mouse asthma model to determine the effect of ozone and DEP on airway hyperresponsiveness and inflammation. Methacholine enhanced pause (Penh) was measured. Levels of IL-4 and IFN-γ were quantified in bronchoalveolar lavage fluids by enzyme immunoassays. The OVA-sensitized-challenged and ozone and DEP exposure group had higher Penh than the OVA-sensitized-challenged group and the OVA-sensitized-challenged and DEP exposure group, and the OVA-sensitized-challenged and ozone exposure group. Levels of IFN-γ were decreased in the OVA-sensitized-challenged and DEP exposure group and the OVA-sensitized-challenged and ozone and DEP exposure group compared to the OVA-sensitized-challenged and ozone exposure group. Levels of IL-4 were increased in the OVA-sensitized-challenged and ozone exposure group and the OVA-sensitized-challenged and DEP exposure group, and the OVA-sensitized-challenged and ozone and DEP exposure group compared to OVA-sensitized-challenged group. Co-exposure of ozone and DEP has additive effect on airway hyperresponsiveness by modulation of IL-4 and IFN-γ suggesting that DEP amplify Th2 immune response. PMID:16224148
Comparing Hall Effect and Field Effect Measurements on the Same Single Nanowire.

PubMed

Hultin, Olof; Otnes, Gaute; Borgström, Magnus T; Björk, Mikael; Samuelson, Lars; Storm, Kristian

2016-01-13

We compare and discuss the two most commonly used electrical characterization techniques for nanowires (NWs). In a novel single-NW device, we combine Hall effect and back-gated and top-gated field effect measurements and quantify the carrier concentrations in a series of sulfur-doped InP NWs. The carrier concentrations from Hall effect and field effect measurements are found to correlate well when using the analysis methods described in this work. This shows that NWs can be accurately characterized with available electrical methods, an important result toward better understanding of semiconductor NW doping.
Effects and biotransformation of the mycotoxin deoxynivalenol in growing pigs fed with naturally contaminated pelleted grains with and without the addition of Coriobacteriaceum DSM 11798.

PubMed

Sayyari, Amin; Fæste, Christiane Kruse; Hansen, Ulrik; Uhlig, Silvio; Framstad, Tore; Schatzmayr, Dian; Sivertsen, Tore

2018-06-01

Deoxynivalenol (DON) is one of the most prevalent Fusarium mycotoxins in grain and can cause economic losses in pig farming due to reduced feed consumption and lower weight gains. Biodetoxification of mycotoxins using bacterial strains has been a focus of research for many years. However, only a few in vivo studies have been conducted on the effectiveness of microbial detoxification of fusariotoxins. This study was therefore aimed at investigating the effect of a feed additive containing the bacterial strain Coriobacteriaceum DSM 11798 (the active ingredient in Biomin® BBSH 797) on growth performance and blood parameters, as well as uptake and metabolism of DON, in growing pigs. Forty-eight crossbred (Landrace-Yorkshire/Duroc-Duroc) weaning pigs were fed with pelleted feed made from naturally contaminated oats, with DON at four concentration levels: (1) control diet (DON < 0.2 mg kg -1 ), (2) low-contaminated diet (DON = 0.92 mg kg -1 ), (3) medium-contaminated diet (DON = 2.2 mg kg -1 ) and (4) high-contaminated diet (DON = 5.0 mg kg -1 ) and equivalent diets containing DSM 11798 as feed additive. During the first 7 days of exposure, pigs in the highest-dose group showed a 20-28% reduction in feed intake and a 24-34% reduction in weight gain compared with pigs in the control and low-dose groups. These differences were levelled out by study completion. Towards the end of the experiment, dose-dependent reductions in serum albumin, globulin and total serum protein were noted in the groups fed with DON-contaminated feed compared with the controls. The addition of DSM 11798 had no effect on the DON-related clinical effects or on the plasma concentrations of DON. The ineffectiveness of the feed additive in the present study could be a consequence of its use in pelleted feed, which might have hindered its rapid release, accessibility or detoxification efficiency in the pig's gastrointestinal tract.
Observational methods in comparative effectiveness research.

PubMed

Concato, John; Lawler, Elizabeth V; Lew, Robert A; Gaziano, J Michael; Aslan, Mihaela; Huang, Grant D

2010-12-01

Comparative effectiveness research (CER) may be defined informally as an assessment of available options for treating specific medical conditions in selected groups of patients. In this context, the most prominent features of CER are the various patient populations, medical ailments, and treatment options involved in any particular project. Yet, each research investigation also has a corresponding study design or "architecture," and in patient-oriented research a common distinction used to describe such designs are randomized controlled trials (RCTs) versus observational studies. The purposes of this overview, with regard to CER, are to (1) understand how observational studies can provide accurate results, comparable to RCTs; (2) recognize strategies used in selected newer methods for conducting observational studies; (3) review selected observational studies from the Veterans Health Administration; and (4) appreciate the importance of fundamental methodological principles when conducting or evaluating individual studies. Published by Elsevier Inc.
The value-based medicine comparative effectiveness and cost-effectiveness of penetrating keratoplasty for keratoconus.

PubMed

Roe, Richard H; Lass, Jonathan H; Brown, Gary C; Brown, Melissa M

2008-10-01

To perform a base case, comparative effectiveness, and cost-effectiveness (cost-utility) analysis of penetrating keratoplasty for patients with severe keratoconus. Visual acuity data were obtained from a large, retrospective multicenter study in which patients with keratoconus with less than 20/40 best corrected visual acuity and/or the inability to wear contact lenses underwent penetrating keratoplasty, with an average follow-up of 2.1 years. The results were combined with other retrospective studies investigating complication rates of penetrating keratoplasty. The data were then incorporated into a cost-utility model using patient preference-based, time trade-off utilities, computer-based decision analysis, and a net present value model to account for the time value of outcomes and money. The comparative effectiveness of the intervention is expressed in quality-of-life gain and QALYs (quality-adjusted life-years), and the cost-effectiveness results are expressed in the outcome of $/QALY (dollars spent per QALY). Penetrating keratoplasty in 1 eye for patients with severe keratoconus results in a comparative effectiveness (value gain) of 16.5% improvement in quality of life every day over the 44-year life expectancy of the average patient with severe keratoconus. Discounting the total value gain of 5.36 QALYs at a 3% annual discount rate yields 3.05 QALYs gained. The incremental cost for penetrating keratoplasty, including all complications, is $5934 ($5913 discounted at 3% per year). Thus, the incremental cost-utility (discounted at 3% annually) for this intervention is $5913/3.05 QALYs = $1942/QALY. If both eyes undergo corneal transplant, the total discounted value gain is 30% and the overall cost-utility is $2003. Surgery on the second eye confers a total discounted value gain of 2.5 QALYs, yielding a quality-of-life gain of 11.6% and a discounted cost-utility of $2238/QALY. Penetrating keratoplasty for patients with severe keratoconus seems to be a
Design of VA Cooperative Study #591: CERV-PTSD, comparative effectiveness research in veterans with PTSD.

PubMed

Schnurr, Paula P; Chard, Kathleen M; Ruzek, Josef I; Chow, Bruce K; Shih, Mei-Chiung; Resick, Patricia A; Foa, Edna B; Marx, Brian P; Huang, Grant D; Lu, Ying

2015-03-01

CERV-PTSD is a randomized controlled trial of two of the most effective treatments for PTSD, Prolonged Exposure (PE) and Cognitive Processing Therapy (CPT). Despite solid evidence that both treatments are effective, there is limited evidence about their effectiveness relative to one another. The primary objective is to compare the effectiveness of PE and CPT for reducing PTSD symptom severity in a healthcare system that offers both treatments. The secondary objective is to compare the effectiveness of PE and CPT for reducing the severity of comorbid mental health problems and service utilization as well as improving functioning and quality of life. The tertiary objective is to examine whether discrepancy between patient preferences and treatment assignment reduces the effectiveness of each treatment. Exploratory analyses will examine whether demographic and clinical characteristics predict differential response to PE and CPT. The study is designed to randomize 900 male and female veterans with PTSD due to any traumatic military event to receive PE or CPT. The standard dose of treatment is 12 weekly sessions but veterans who improve more rapidly may finish in fewer sessions and veterans who improve more slowly may have additional sessions. The primary outcome is improvement in PTSD symptoms, measured during and after treatment and then 3 and 6 months later. As a large multi-site trial with men and women, CERV-PTSD is designed to advance the delivery of care for PTSD by providing conclusive information about whether one treatment is better than the other, overall, and for different types of patients. Published by Elsevier Inc.
Cutting-edge technology for public health workforce training in comparative effectiveness research.

PubMed

Salinas-Miranda, Abraham A; Nash, Michelle C; Salemi, Jason L; Mbah, Alfred K; Salihu, Hamisu M

2013-06-01

A critical mass of public health practitioners with expertise in analytic techniques and best practices in comparative effectiveness research is needed to fuel informed decisions and improve the quality of health care. The purpose of this case study is to describe the development and formative evaluation of a technology-enhanced comparative effectiveness research learning curriculum and to assess its potential utility to improve core comparative effectiveness research competencies among the public health workforce. Selected public health experts formed a multidisciplinary research collaborative and participated in the development and evaluation of a blended 15-week comprehensive e-comparative effectiveness research training program, which incorporated an array of health informatics technologies. Results indicate that research-based organizations can use a systematic, flexible, and rapid means of instructing their workforce using technology-enhanced authoring tools, learning management systems, survey research software, online communities of practice, and mobile communication for effective and creative comparative effectiveness research training of the public health workforce.
Impact of fitting dominance and additive effects on accuracy of genomic prediction of breeding values in layers.

PubMed

Heidaritabar, M; Wolc, A; Arango, J; Zeng, J; Settar, P; Fulton, J E; O'Sullivan, N P; Bastiaansen, J W M; Fernando, R L; Garrick, D J; Dekkers, J C M

2016-10-01

Most genomic prediction studies fit only additive effects in models to estimate genomic breeding values (GEBV). However, if dominance genetic effects are an important source of variation for complex traits, accounting for them may improve the accuracy of GEBV. We investigated the effect of fitting dominance and additive effects on the accuracy of GEBV for eight egg production and quality traits in a purebred line of brown layers using pedigree or genomic information (42K single-nucleotide polymorphism (SNP) panel). Phenotypes were corrected for the effect of hatch date. Additive and dominance genetic variances were estimated using genomic-based [genomic best linear unbiased prediction (GBLUP)-REML and BayesC] and pedigree-based (PBLUP-REML) methods. Breeding values were predicted using a model that included both additive and dominance effects and a model that included only additive effects. The reference population consisted of approximately 1800 animals hatched between 2004 and 2009, while approximately 300 young animals hatched in 2010 were used for validation. Accuracy of prediction was computed as the correlation between phenotypes and estimated breeding values of the validation animals divided by the square root of the estimate of heritability in the whole population. The proportion of dominance variance to total phenotypic variance ranged from 0.03 to 0.22 with PBLUP-REML across traits, from 0 to 0.03 with GBLUP-REML and from 0.01 to 0.05 with BayesC. Accuracies of GEBV ranged from 0.28 to 0.60 across traits. Inclusion of dominance effects did not improve the accuracy of GEBV, and differences in their accuracies between genomic-based methods were small (0.01-0.05), with GBLUP-REML yielding higher prediction accuracies than BayesC for egg production, egg colour and yolk weight, while BayesC yielded higher accuracies than GBLUP-REML for the other traits. In conclusion, fitting dominance effects did not impact accuracy of genomic prediction of breeding values in
Energy-effective Grinding of Inorganic Solids Using Organic Additives.

PubMed

Mishra, Ratan K; Weibel, Martin; Müller, Thomas; Heinz, Hendrik; Flatt, Robert J

2017-08-09

We present our research findings related to new formulations of the organic additives (grinding aids) needed for the efficient grinding of inorganic solids. Even though the size reduction phenomena of the inorganic solid particles in a ball mill is purely a physical process, the addition of grinding aids in milling media introduces a complex physicochemical process. In addition to further gain in productivity, the organic additive helps to reduce the energy needed for grinding, which in the case of cement clinker has major environmental implications worldwide. This is primarily due to the tremendous amounts of cement produced and almost 30% of the associated electrical energy is consumed for grinding. In this paper, we examine the question of how to optimize these grinding aids linking molecular insight into their working mechanisms, and also how to design chemical additives of improved performance for industrial comminution.
Septic tank additive impacts on microbial populations.

PubMed

Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

2008-01-01

Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.
Comparative effectiveness and cost-effectiveness analyses frequently agree on value.

PubMed

Glick, Henry A; McElligott, Sean; Pauly, Mark V; Willke, Richard J; Bergquist, Henry; Doshi, Jalpa; Fleisher, Lee A; Kinosian, Bruce; Perfetto, Eleanor; Polsky, Daniel E; Schwartz, J Sanford

2015-05-01

The Patient-Centered Outcomes Research Institute, known as PCORI, was established by Congress as part of the Affordable Care Act (ACA) to promote evidence-based treatment. Provisions of the ACA prohibit the use of a cost-effectiveness analysis threshold and quality-adjusted life-years (QALYs) in PCORI comparative effectiveness studies, which has been understood as a prohibition on support for PCORI's conducting conventional cost-effectiveness analyses. This constraint complicates evidence-based choices where incremental improvements in outcomes are achieved at increased costs of care. How frequently this limitation inhibits efficient cost containment, also a goal of the ACA, depends on how often more effective treatment is not cost-effective relative to less effective treatment. We examined the largest database of studies of comparisons of effectiveness and cost-effectiveness to see how often there is disagreement between the more effective treatment and the cost-effective treatment, for various thresholds that may define good value. We found that under the benchmark assumption, disagreement between the two types of analyses occurs in 19 percent of cases. Disagreement is more likely to occur if a treatment intervention is musculoskeletal and less likely to occur if it is surgical or involves secondary prevention, or if the study was funded by a pharmaceutical company. Project HOPE—The People-to-People Health Foundation, Inc.
Reduction of dioxin-like toxicity in effluents by additional wastewater treatment and related effects in fish.

PubMed

Maier, Diana; Benisek, Martin; Blaha, Ludek; Dondero, Francesco; Giesy, John P; Köhler, Heinz-R; Richter, Doreen; Scheurer, Marco; Triebskorn, Rita

2016-10-01

Efficiency of advanced wastewater treatment technologies to reduce micropollutants which mediate dioxin-like toxicity was investigated. Technologies compared included ozonation, powdered activated carbon and granular activated carbon. In addition to chemical analyses in samples of effluents, surface waters, sediments, and fish, (1) dioxin-like potentials were measured in paired samples of effluents, surface waters, and sediments by use of an in vitro biotest (reporter gene assay) and (2) dioxin-like effects were investigated in exposed fish by use of in vivo activity of the mixed-function, monooxygenase enzyme, ethoxyresorufin O-deethylase (EROD) in liver. All advanced technologies studied, based on degradation or adsorption, significantly reduced dioxin-like potentials in samples and resulted in lesser EROD activity in livers of fish. Results of in vitro and in vivo biological responses were not clearly related to quantification of targeted analytes by use of instrumental analyses. Copyright © 2016 Elsevier Inc. All rights reserved.
[Effects of water levels and the additions of different nitrogen forms on soil net nitrogen transformation rate and N2O emission in subtropical forest soils].

PubMed

Ma, Fen; Ma, Hong-liang; Qiu, Hong; Yang, Hong-yu

2015-02-01

An incubation experiment was conducted to investigate the effects of the additions of different nitrogen forms on nitrogen transformation in red soils of subtropical forest under soil moisture conditions with 40%, 70% and 110% of water holding capacity (WHC). The results showed that soil net mineralization and ammonification rates were maximum at 70% WHC and minimum at 40% WHC. Compared with the control, the addition of NO(3-)-N decreased the soil net mineralization and ammonification rates by 56.1% and 43.0% under 70% WHC condition, and decreased by 68.2% and 19.0% under 110% WHC, respectively. However, the proportion of ammonification to mineralization increased at 70% and 110% WHC, which suggested that nitrate addition inhibited the nitrification. With addition of NO(3-)-N at 110% WHC, the net nitrification rate was lowest while N20 emission was highest with the concomitant decrease of nitrate content, indicating that N2O emission was largely derived from denitrification. However, at 40% WHC and 70% WHC, the maximum N20 flux was found at the early stage of incubation. Even with addition of NH(4+)-N and NO(3-)-N, N2O flux did not change much at the latter stage of incubation, indicating that autotrophic nitrification was dominant for N20 production at the early stage of incubation. Under 40% WHC condition, soluble organic carbon increased more and it increased largely with NH(4+)-N addition, which meant NH(4+)-N addition could enhance the mineralization of soil organic matter. Under 40% and 110% WHC conditions, the addition of NH(4+)-N increased significantly the soil soluble organic nitrogen (SON) by 73.6% and 176.6% compared with the control, respectively. A significant increase of 78.7% for SON was only found at 40% WHC under addition of NO(3-)-N compared with the control. These results showed that high soil moisture condition and addition of NH(4+)-N were of benefit to SON formation.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.